Powered by Deep Web Technologies
Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Radiological Final Status Survey of the Hammond Depot, Hammond, Indiana  

Science Conference Proceedings (OSTI)

ORISE conducted extensive scoping, characterization, and final status surveys of land areas and structures at the DNSC’s Hammond Depot located in Hammond, Indiana in multiple phases during 2005, 2006 and 2007.

T.J. Vitkus

2008-04-07T23:59:59.000Z

2

Survey of utility lighting programs: Final report  

SciTech Connect

Reshaping loads is a major goal of utility lighting efforts. Nearly 60% of the utilities in this survey use lighting for demand-side management. The most popular programs promote lighting efficiency to reduce daytime peaks and outdoor security lighting to increase off-peak loads.

Isaksen, L.

1987-02-01T23:59:59.000Z

3

A Vlbi Survey of Weak Extragalactic Radio Sources for the Alignment of the Icrf and the Future Gaia Frame  

E-Print Network (OSTI)

The space astrometry mission GAIA will construct a dense optical QSO-based celestial reference frame. For consistency between the optical and radio positions, it will be important to align the GAIA frame and the International Celestial Reference Frame (ICRF) with the highest accuracy. Currently, it is found that only 10% of the ICRF sources are suitable to establish this link, either because they are not bright enough at optical wavelengths or because they have significant extended radio emission which precludes reaching the highest astrometric accuracy. In order to improve the situation, we have initiated a VLBI survey dedicated to finding additional high-quality radio sources for aligning the two frames. The sample consists of about 450 sources, typically 20 times weaker than the current ICRF sources, which have been selected by cross-correlating optical and radio catalogues. The paper presents the observing strategy and includes preliminary results of observation of 224 of these sources with the European VLBI Network in June 2007.

G. Bourda; P. Charlot; R. Porcas; S. Garrington

2008-03-10T23:59:59.000Z

4

[Wing 1 radiation survey and contamination report]. Final report  

SciTech Connect

We have completed the 5480.11 survey for Wing 1. All area(s)/item(s) requested by the 5480.11 committee have been thoroughly surveyed and documented. Decontamination/disposal of contaminated items has been accomplished. The wing 1 survey was started on 8/13/90 and completed 9/18/90. However, the follow-up surveys were not completed until 2/18/91. We received the final set of smear samples for wing 1 on 1/13/91. A total of 5,495 smears were taken from wing 1 and total of 465 smears were taken during the follow-up surveys. There were a total 122 items found to have fixed contamination and 4 items with smearable contamination in excess of the limits specified in DOE ORDER 5480.11 (AR 3-7). The following area(s)/item(s) were not included in the 5480.11 survey: Hallways, Access panels, Men`s and women`s change rooms, Janitor closets, Wall lockers and item(s) stored in wing 1 hallways and room 1116. If our contract is renewed, we will include those areas in our survey according to your request of April 15, 1991.

Olsen, K.

1991-05-13T23:59:59.000Z

5

Final Status Survey for the Largest Decommissioning Project on Earth  

Science Conference Proceedings (OSTI)

To assist the United States Department of Energy's (US DOE's) re-industrialization efforts at its gaseous diffusion site in Oak Ridge, Tennessee, known as the East Tennessee Technology Park (ETTP), the US DOE awarded a 6-year Decontamination and Decommissioning (D and D) contract to BNG America (formerly BNFL Inc.) in 1997. The ETTP 3-Building D and D Project included the removal and disposition of the materials and equipment from the K-33, K-31, and K-29 Gaseous Diffusion Plant buildings. The three buildings comprise more than 4.8 million square feet (446,000 square meters) of floor surface area and more than 350 million pounds (148 million kilograms) of hazardous and radioactively contaminated material, making it the largest nuclear D and D project in progress anywhere in the world. The logistical hurdles involved in a project of this scope and magnitude required an extensive amount of Engineering and Health Physics professionals. In order to accomplish the Final Status Survey (FSS) for a project of this scope, the speed and efficiency of automated survey equipment was essential. Surveys of floors, structural steel and ceilings up to 60 feet (18 meters) were required. The FSS had to be expanded to include additional remediation and surveys due to characterization surveys and assumptions regarding the nature and extent of contamination provided by the US DOE. Survey design and technical bases had to consider highly variable constituents; including uranium from depleted to low enrichment, variable levels of Technetium-99 and transuranic nuclides, which were introduced into the cascade during the 1960's when recycled uranium (RU) from Savannah River was re-enriched at the facility. The RU was transported to unexpected locations from leaks in the cascade by complex building ventilation patterns. The primary survey tool used for the post remediation and FSS was the Surface Contamination Monitor (SCM) and the associated Survey Information Management System (SIMS), developed by Shonka Research Associates, Inc. (SRA). Final Status Radiological surveys have been performed over the last year on a 24-hour per day and seven day per week basis. As many as eight SCMs have been in use at any one time. Each SCM can perform over 250,000 measurements per hour, simultaneously collecting both scan and static measurement requirements to meet FSS regulatory requirements. Thus, efficient management and quality control of giga-bytes of data was needed. In addition, some surveys were accomplished with traditional instrumentation and with some using other automated systems such as smear counters. The FSS Reports required integration of all of the data in a format that permitted undemanding verification by DOE using the ORISE/ESSAP IVT contractor. A project of this scope and magnitude could not have been accomplished without the use of the SCM and SIMS. This paper reports on the survey and logistical issues that required ingenuity of the entire 1,700-person workforce to resolve. In particular, this paper summarizes the issues addressed and resolved by the integrated team of survey technicians, subject matter experts (SMEs), radiological engineers, data processing staff and BNG America management. (authors)

Dubiel, R.W. [Millennium Services, Inc., 222 Creekstone Ridge, Woodstock, GA 30188 (United States); Miller, J. [BNG America, 804 S. Illinois Avenue, Oak Ridge, TN 37830 (United States); Quayle, D. [Shonka Research Associates, Inc., 704 S. Illinois Avenue, Oak Ridge, TN 37830 (United States)

2006-07-01T23:59:59.000Z

6

Final Status Survey and Site Release Experience Report  

Science Conference Proceedings (OSTI)

Several U.S. nuclear power plants entered decommissioning in the 1990's. The ultimate goal of the decommissioning of a reactor site (unless otherwise delayed due to a decision to place the plant in a SAFSTOR mode to be decommissioned at a later date) is to release the site for future use. This report provides detailed information concerning the preparation of release criteria a utility must meet prior to the release of the site, and the experiences obtained in performing the Final Status Surveys which de...

2008-03-31T23:59:59.000Z

7

Fort St. Vrain Decommissioning: Final Site Radiation Survey: Summary Report and Lessons Learned  

Science Conference Proceedings (OSTI)

This report describes the final step in the decommissioning process at Public Service Company of Colorado's (PSCo) Fort St. Vrain nuclear power plant. The final site radiation survey documents that all nuclear facility surfaces meet the established release limits for unrestricted use. The survey formed the legal basis for the termination of the Fort St. Vrain nuclear license, which occurred in August 1997. The lessons learned in this process will be valuable to other utilities with permanently shutdown p...

1998-02-13T23:59:59.000Z

8

Trojan Nuclear Plant Decommissioning: Final Survey for the Independent Spent Fuel Storage Installation Site  

Science Conference Proceedings (OSTI)

This report describes the final radiological survey for the area where Portland General Electric (PGE) will construct the Independent Spent Fuel Storage Installation (ISFSI) at Trojan nuclear power plant. The survey fulfills the requirements for release of this area from Trojan's 10 CFR 50 license before radiation levels increase with spent fuel storage in the ISFSI.

1998-05-13T23:59:59.000Z

9

Pilot aerial infrared roof top survey. Final report  

SciTech Connect

A summary is presented of a pilot aerial infrared roof top study conducted by the Minnesota Energy Agency. Infrared surveys of 27 Minnesota cities were conducted during the fall and winter of the 1976-1977 heating season. In addition, conventional daytime color photographs were taken of several cities. Film processing was done by the Environmental Protection Agency. The University of Minnesota conducted ground tests to verify the aerial infrared imagery. Thermograph dissemination centers were established in each city and training seminars and materials were prepared and delivered to dissemination center staff. A survey of homeowners who viewed their thermograph at a dissemination center were used to determine the energy savings resulting from the program. An Aerial Infrared Program Users Manual was prepared by the Energy Agency and the Remote Sensing Institute of Brookings, South Dakota.

1979-10-15T23:59:59.000Z

10

Waste-water characterization survey, Barksdale AFB, Louisiana. Final report  

Science Conference Proceedings (OSTI)

The USAFOEHL conducted an on-site waste-water-quality survey at Barksdale AFB, LA from 14 to 28 March 1988 at the request of the 2nd Strategic Hospital/SGPB. The survey was requested to resolve a 1 October 1987 EPA Region VI 30-day administrative order. All samples were analyzed for pH, chemical oxygen demand (COD), conductivity, total suspended solids (TSS) and oil and grease. Samples taken from industrial areas were selectively analyzed for purgeable halocarbons, purgeable aromatics, total recoverable phenols (EPA Method 420), phenols (EPA Method 604), fluorides, surfactants (MBAS), characteristic hazardous waste and metals by the ICP metals screen. Lift stations (buildings 4725 and 3455) and NPDES site 003 were also analyzed for biochemical oxygen demand (BOD). Sampling results were evaluated against the following criteria: (1) Bossier City, Louisiana Wastewater Permit Standard BC0022; (2) Pretreatment Standards for Existing Sources, 40 CFR Part 433 - Metal finishing point source category; (3) NPDES Permit LA0007293 for Mack's Bayou.

Zimmer, A.T.

1988-11-01T23:59:59.000Z

11

Research in radiation monitoring survey instrumentation. Final report  

SciTech Connect

Two low-power solid-state prototype readout units were developed, an LED display and a LCD display. This display output was in a bar-graph format, covering four-decades of information, with 10-segments per decade. The displays accept a frequency input, which is standardly available from several portable radiation-survey instruments. Both readout units will operate on two D-cell batteries (3.0 Volt), with a typical current drain requirement of 0.3 MA for the LED display and 30..mu..A for the LCD display. A wide-range electrometer circuit was also developed. The circuit covers an input current range from 10/sup -13/ A to 10/sup -8/ A. The output signal is a pulse whose frequency is directly proportional to input current. The circuit requires no high-megohm resistors, and is autoranging. Several candidate input amplifiers were analyzed and evaluated for use with the electrometer circuit.

Blalock, T.V.; Kennedy, E.J.; Phillips, R.G.; Walker, E.W. Jr.

1978-01-20T23:59:59.000Z

12

Solar/hydrogen systems for the 1985 to 2000 time frame. Volume I. Solar/hydrogen systems assessment. Final report  

DOE Green Energy (OSTI)

The findings of a study of opportunities for commercialization of systems capable of producing hydrogen from solar energy are presented in two volumes. A compendium of monographs by specialists in the fields of solar energy conversion technologies, hydrogen production technologies and related technology descriptions from the general literature comprise Volume II. This data base was used to support an evaluation and selection process that identified four candidate solar/hydrogen systems best suited to commercialization within the next two decades. Volume I first reviews the background of the work and the methods used. Then an evaluation of the hydrogen product costs that might be achieved by the four selected candidate systems (photovoltaic/water electrolysis, thermal-heat engine/water electrolysis, wind energy/water electrolysis, small hydrogen/water electrolysis) is compared with the pricing structure and practices of the commodity gas market. Subsequently, product cost and market price match is noted to exist in the small user sector of the hydrogen marketplace. Barriers to and historical time lags in, commercialization of new technologies are then reviewed. Finally, recommendations for development and demonstration programs designed to accelerate the commercialization of the candidate systems are presented.

Foster, R. W.; Tison, R. R.; Escher, W. J.D.; Hanson, J. A.

1980-06-01T23:59:59.000Z

13

Final Status Survey Report for Corrective Action Unit 117 - Pluto Disassembly Facility, Building 2201, Nevada National Security Site, Nevada  

SciTech Connect

This document contains the process knowledge, radiological data and subsequent statistical methodology and analysis to support approval for the radiological release of Corrective Action Unit (CAU) 117 – Pluto Disassembly Facility, Building 2201 located in Area 26 of the Nevada National Security Site (NNSS). Preparations for release of the building began in 2009 and followed the methodology described in the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM). MARSSIM is the DOE approved process for release of Real Property (buildings and landmasses) to a set of established criteria or authorized limits. The pre-approved authorized limits for surface contamination values and corresponding assumptions were established by DOE O 5400.5. The release criteria coincide with the acceptance criteria of the U10C landfill permit. The U10C landfill is the proposed location to dispose of the radiologically non-impacted, or “clean,” building rubble following demolition. However, other disposition options that include the building and/or waste remaining at the NNSS may be considered providing that the same release limits apply. The Final Status Survey was designed following MARSSIM guidance by reviewing historical documentation and radiological survey data. Following this review a formal radiological characterization survey was performed in two phases. The characterization revealed multiple areas of residual radioactivity above the release criteria. These locations were remediated (decontaminated) and then the surface activity was verified to be less than the release criteria. Once remediation efforts had been successfully completed, a Final Status Survey Plan (10-015, “Final Status Survey Plan for Corrective Action Unit 117 – Pluto Disassembly Facility, Building 2201”) was developed and implemented to complete the final step in the MARSSIM process, the Final Status Survey. The Final Status Survey Plan consisted of categorizing each individual room into one of three categories: Class 1, Class 2 or Class 3 (a fourth category is a “Non-Impacted Class” which in the case of Building 2201 only pertained to exterior surfaces of the building.) The majority of the rooms were determined to fall in the less restrictive Class 3 category, however, Rooms 102, 104, 106, and 107 were identified as containing Class 1 and 2 areas. Building 2201 was divided into “survey units” and surveyed following the requirements of the Final Status Survey Plan for each particular class. As each survey unit was completed and documented, the survey results were evaluated. Each sample (static measurement) with units of counts per minute (cpm) was corrected for the appropriate background and converted to a value with units of dpm/100 cm2. With a surface contamination value in the appropriate units, it was compared to the surface contamination limits, or in this case the derived concentration guideline level (DCGLw). The appropriate statistical test (sign test) was then performed. If the survey unit was statistically determined to be below the DCGLw, then the survey unit passed and the null hypothesis (that the survey unit is above limits) was rejected. If the survey unit was equal to or below the critical value in the sign test, the null hypothesis was not rejected. This process was performed for all survey units within Building 2201. A total of thirty-three “Class 1,” four “Class 2,” and one “Class 3” survey units were developed, surveyed, and evaluated. All survey units successfully passed the statistical test. Building 2201 meets the release criteria commensurate with the Waste Acceptance Criteria (for radiological purposes) of the U10C landfill permit residing within NNSS boundaries. Based on the thorough statistical sampling and scanning of the building’s interior, Building 2201 may be considered radiologically “clean,” or free of contamination.

Jeremy Gwin and Douglas Frenette

2010-09-30T23:59:59.000Z

14

A Survey of Interventional Radiology Awareness Among Final-Year Medical Students in a European Country  

Science Conference Proceedings (OSTI)

Interventional radiology (IR) is a rapidly expanding specialty that is facing the challenges of turf wars and personnel shortages. Appropriate exposure of medical students to this field can be vital to recruitment of potential future trainees or referring physicians. The aim of this study was to determine the knowledge and views of final-year medical students in a single EU country regarding various aspects of IR. An electronic survey was sent via e-mail to all final-year medical students in a European country. The students were given a month to respond to the questionnaire. A total of 234 students of 675 (34.5%) replied to the survey. Of the respondents, 35% had previously completed an attachment to the radiology department. The majority of students (63%) thought their knowledge in radiology in general was poor. The percentage of students who correctly identified procedures performed by interventional radiologists was 69% for Hickman line insertion, 79% for fibroid embolization, and 67.5% for lower limb angioplasty. Sixty percent, 30%, and 47% thought that interventional radiologists perform cardiac angioplasties, perform arterial bypasses, and create AV fistulas, respectively. Forty-nine percent felt that interventional radiologists are surgically trained. Eighty-three percent of students were first made aware of angioplasty by a cardiologist. Thirty-one percent thought that interventional radiologists do ward rounds, 24% thought that interventional radiologists have admitting rights, and 26% felt that interventional radiologists run an outpatient practice. A significant number of students (76%) thought that the job prospects in IR are good or excellent but only 40.5% were willing to consider a career in IR. In conclusion, this study indicates that IR remains a nascent but attractive specialty to the majority of medical students. Further development of the existing informal undergraduate curriculum to address shortcomings will ensure that IR continues to attract the brightest talents to the field.

Leong, Sum; Keeling, Aoife N.; Lee, Michael J., E-mail: mlee@rcsi.i [Beaumont Hospital, Department of Academic Radiology (Ireland)

2009-07-15T23:59:59.000Z

15

Final report of the radiological release survey of Building 19 at the Grand Junction Office Facility  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) Grand Junction Office (GJO) occupies a 61.7-acre facility along the Gunnison River near Grand Junction, Colorado. This site was contaminated with uranium ore concentrates and mill tailings during vanadium refining activities of the Manhattan Engineer District, and during sampling, assaying, pilot milling, storage, and brokerage activities conducted for the U.S. Atomic Energy Commission`s domestic uranium procurement program. The DOE Defense Decontamination and Decommissioning Program established the GJO Remedial Action Project (GJORAP) to clean up and restore the facility lands, improvements, and underlying aquifer. WASTREN-Grand Junction is the site contractor for the facility and the remedial action contractor for GJORAP. Building 19 and the underlying soil were found not to be radiologically contaminated; therefore, the building can be released for unrestricted use. Placards have been placed at the building entrances indicating the completion of the radiological release survey and prohibiting the introduction of any radioactive materials within the building without written approvals from the GJO Facilities Operations Manager. This document was prepared in response to a DOE-GJO request for an individual final release report for each GJO building.

Johnson, R.K.; Corle, S.G.

1997-09-01T23:59:59.000Z

16

Final report of the radiological release survey of Building 11 at the Grand Junction Office Facility  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) Grand Junction Office (GJO) occupies a 61.7-acre facility along the Gunnison River near Grand Junction, Colorado. This site was contaminated with uranium ore concentrates and mill tailings during vanadium refining activities of the Manhattan Engineer District, and during sampling, assaying, pilot milling, storage, and brokerage activities conducted for the U.S. Atomic Energy Commission`s domestic uranium procurement program. The DOE Defense Decontamination and Decommissioning Program established the GJO Remedial Action Project (GJORAP) to clean up and restore the facility lands, improvements, and underlying aquifer. WASTREN-Grand Junction is the site contractor for the facility and the remedial action contractor for GJORAP. Building 11 and the underlying soil were found not to be radiologically contaminated; therefore, the building can be released for unrestricted use. Placards have been placed at the building entrances indicating the completion of the radiological release survey and prohibiting the introduction of any radioactive materials within the building without written approvals from the GJO Facilities Operations Manager. This document was prepared in response to a DOE-GJO request for an individual final release report for each GJO building.

Johnson, R.K.; Corle, S.G.

1997-09-01T23:59:59.000Z

17

Final report of the radiological release survey of Building 29 at the Grand Junction Office Facility  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) Grand Junction Office (GJO) occupies a 61.7-acre facility along the Gunnison River near Grand Junction, Colorado. This site was contaminated with uranium ore concentrates and mill tailing during vanadium refining activities of the Manhattan Engineer District, and during sampling, assaying, pilot milling, storage, and brokerage activities conducted for the U.S. Atomic Energy Commission`s domestic uranium procurement program. The DOE Defense Decontamination and Decommissioning Program established the GJO Remedial Action Project (GJORAP) to clean up and restore the facility lands, improvements, and underlying aquifer. WASTREN-Grand Junction is the site contractor for the facility and the remedial action contractor for GJORAP. Building 29 and the underlying soil were found not to be radiologically contaminated; therefore, the building can be released for unrestricted use. Placards have been placed at the building entrances indicating the completion of the radiological release survey and prohibiting the introduction of any radioactive materials within the building without written approvals from the GJO Facilities Operations Manager. This document was prepared in response to a DOE-GJO request for an individual final release report for each GJO building.

Johnson, R.K.; Corle, S.G.

1997-09-01T23:59:59.000Z

18

Final Report - Independent Confirmatory Survey Summary and Results for the Hematite Decommissioning Project  

SciTech Connect

The objectives of the confirmatory surveys were to provide independent contractor field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the licensee’s procedures and survey results.

E.N. Bailey

2009-03-18T23:59:59.000Z

19

Marine Megafauna Surveys in Timor Leste: Identifying Opportunities for Potential Ecotourism Final Report  

E-Print Network (OSTI)

) monthly aerial surveys (ii) field ground-truthing using boats and (iii) training of TL government staff in aerial survey techniques (manual prepared) and GIS analysis of data. A light plane was used for aerial of the coast. Main findings of aerial and boat surveys Dolphins and small whales were sighted throughout all

20

Phase 1 Final status survey plan for the West Valley demonstration project.  

SciTech Connect

This plan provides the technical basis and associated protocols to support Phase 1 final status survey (FSS) data collection and interpretation as part of the West Valley Demonstration Project Phase 1 Decommissioning Plan process. This plan is consistent with the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM). The Phase 1 Decommissioning Plan provides the relevant derived concentration guideline levels (DCGLs) for the Phase 1 radionuclides of interest. This plan includes protocols that will be applied to the deep excavations planned for Waste Management Area (WMA) 1 and WMA 2, for surface soils outside the WMA 1 and WMA 2 excavations that do not have contamination impacts at depths greater than one meter, and for areas that are used for Phase 1 contaminated soil lay-down purposes. All excavated and lay-down areas will be classified as MARSSIM Class 1 areas. Surface soils that have not been excavated, are not expected to exceed DCGLs, and do not have contamination impacts at depths greater than one meter will be divided into either Class 1 or Class 2 areas depending on the expected potential for surface soil contamination in those areas. The plan uses gamma scans combined with biased soil samples to address DCGLemc concerns. The plan uses systematic soil sampling combined with area factors to address DCGLw and DCGLemc concerns. The Sign test will be used to statistically evaluate DCGLw compliance. If the results from the characterization sampling and analysis plan (CSAP) data collection indicate that background may be a significant issue for Sign test implementation, the Wilcoxon rank sum (WRS) test will be used instead to demonstrate DCGLw compliance. A reference area will be selected on the basis of CSAP data results if the WRS test becomes a necessity. The WMA 1 excavation footprint includes approximately 476 foundation pilings that will be trimmed and left in place. Piling-specific systematic and biased sampling will be conducted to address concerns that these pilings may have served as preferential flow pathways into the underlying Lavery till. Phase 1 FSS data collection results will be summarized, presented, and interpreted in one or more FSS reports.

Johnson, R. L. (Environmental Science Division)

2011-05-31T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Advanced commercial survey methods (COMSURV). Volume 1. Demonstration of tailored versus general questionnaires. Final report  

Science Conference Proceedings (OSTI)

This report discusses the results of a demonstration to assess the effects of questionnaire design on response rates, data quality, and general questionnaire performance in commercial sector surveys. With the cooperation of the Virginia Power Company (VEPCO), the concept of tailoring the questionnaire to specific types of commercial establishments was tested in a survey of food stores and office buildings. Tailoring involves the use of trade-specific language, questions about specialized equipment, and special instructions. One result of this study was the demonstration that it is possible to collect detailed trade-specific information with a tailored mail survey instrument. It was also expected that tailoring would improve both overall response rates and question-specific response rates, but this does not appear to be the case. In fact, the results indicate that tailored questionnaires may decrease overall response rates since misclassified units are less likely to respond. In view of this, some guidelines for the use of tailored survey instruments are presented. This report also contains numerous comparisons of the VEPCO survey results with results from the Nonresidential Building Energy Consumption Survey (NBECS). The comparisons reveal that the mail survey technique did provide estimates which compared reasonably with larger-scale on-site surveys.

McCarthy, P.M.; Bernstein, H.M.

1986-03-01T23:59:59.000Z

22

Nevada Test Site Area 25. Radiological survey and cleanup project, 1974-1983. Final report  

SciTech Connect

This report describes radiological survey, decontamination and decommissioning of the Nevada Test Site (NTS) Area 25 facilities and land areas incorporated in the Nuclear Rocket Development Station (NRDS). Buildings, facilities and support systems used after 1959 for nuclear reactor and engine testing were surveyed for the presence of radioactive contamination. The cleanup was part of the Surplus Facilities Management Program funded by the Department of Energy's Richland Operations Office. The radiological survey portion of the project encompassed portable instrument surveys and removable contamination surveys (swipe) for alpha and beta plus gamma radiation contamination of facilities, equipment and land areas. Soil sampling was also accomplished. The majority of Area 25 facilities and land areas have been returned to unrestricted use. Remaining radiologically contaminated areas are posted with warning signs and barricades. 12 figures.

McKnight, R.K.; Rosenberry, C.E.; Orcutt, J.A.

1984-01-01T23:59:59.000Z

23

Energy Efficiency and Renewable Energy Network (EREN) customer satisfaction survey, 1997. Final report  

SciTech Connect

the EREN Customer Satisfaction Survey 1997 was designed to follow up the results of the 1995-96 Surveys, enabling comparison to the 1995- 96 baseline, and to provide additional qualitative feedback about EREN. Both the 1995-96 and 1997 Surveys had these objectives: Identify and define actual EREN users; Determine the value or benefits derived from the use of EREN; Determine the kind and quality of services that users want; Determine the users` levels of satisfaction with existing services; Determine users` preferences in both the sources of service and means of delivery; and Establish continuous quality improvement measures. This report presents the methodology used, scope and limitations of the study, description of the survey instrument, and findings regarding demographics, technical capabilities, usage patterns, general use, importance of and satisfaction with resources, and additional information and comments.

Anderson, A.V. [Information International Associates, Inc., Oak Ridge, TN (United States); Henderson, D.P. [USDOE Office of Scientific and Technical Information (OSTI), Oak Ridge, TN (United States)

1997-07-01T23:59:59.000Z

24

Durability and reliability of solar domestic hot water heaters: Survey results. Final report, Part 1  

SciTech Connect

An unresolved barrier for consumer acceptance of SDWH systems is the perception that they are unreliable and that their service life is significantly less than that claimed by the manufacturers/dealers. A comprehensive survey was developed to identify and define the relevant durability and reliability issues that affect the long term performance of SDWH systems. The survey was directed towards installers and service contractors with significant field experience.

Ramirez-Vargas, R.; Whitfield, K. [Arizona State Univ., Tempe, AZ (United States); Hicks, B.; Wood, B.D. [Univ. of Nevada, Reno, NV (United States)

1998-03-01T23:59:59.000Z

25

Michigan residential heating oil and propane price survey: 1995--1996 heating season. Final report  

SciTech Connect

This report summarizes the results of a survey of residential No. 2 distillate fuel (home heating oil) and liquefied petroleum gas (propane) prices over the 1995--1996 heating season in Michigan. The Michigan`s Public Service Commission (MPSC) conducted the survey under a cooperative agreement with the US Department of Energy`s (DOE) Energy Information Administration (EIA). This survey was funded in part by a grant from the DOE. From October 1995 through March 1996, the MPSC surveyed participating distributors by telephone for current residential retail home heating oil and propane prices. The MPSC transmitted the data via a computer modem to the EIA using the Petroleum Electronic Data Reporting Option (PEDRO). Survey results were published in aggregate on the MPSC World Wide Web site at http://ermisweb.state.mi.us/shopp. The page was updated with both residential and wholesale prices immediately following the transmission of the data to the EIA. The EIA constructed the survey using a sample of Michigan home heating oil and propane retailers. The sample accounts for different sales volumes, geographic location, and sources of primary supply.

Moriarty, C.

1996-05-01T23:59:59.000Z

26

Microsoft Word - 2011 Pantex Quality Assurance Survey Activity Report _May 2-6, 2011_ final  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PTX-2011-05-06 PTX-2011-05-06 Site: Pantex Plant Subject: Office of Enforcement and Oversight's Office of Safety and Emergency Management Evaluations Activity Report for the Pantex Site Office Quality Assurance Survey Dates of Activity : 05/02/2011 - 05/06/2011 Report Preparer William Macon Activity Description/Purpose: In coordination with the Pantex Site Office (PXSO), the Office of Health, Safety and Security (HSS) site lead participated in a National Nuclear Security Administration (NNSA)/PXSO Quality Assurance Survey (QAS 1) of the contractor's weapon quality program conducted May 2-5, 2011. Result: The HSS site lead participated in the QAS 1 as a member of the survey team and was responsible for reviewing the following Department of Energy/NNSA Weapon Quality Policy (QC-1) elements: 2.1 Risk-Based Program, 2.2 Quality

27

Waste-water characterization survey, Little Rock AFB, Arizona. Final report, 11-24 July 1988  

Science Conference Proceedings (OSTI)

The AFOEHL conducted a waste-water characterization survey at Little Rock AFB from 11 to 24 Jul 88. The scope of the survey included characterizing the major sanitary discharges on base and determining whether the waste-water being discharged to the Jacksonville Wastewater Treatment plant violated limits for biochemical oxygen demand and total suspended solids. A total of 26 sampling sites were evaluated. Analytical results showed that discharge standards for biological oxygen demand and total suspended solids were not being exceeded by Little Rock AFB.

Scott, S.P.

1989-05-01T23:59:59.000Z

28

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

Residential Energy Consumption Survey." " U.S. Energy Information Administration 2009 Residential Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary...

29

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Residential Energy Consumption Survey." " U.S. Energy Information Administration 2009 Residential Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary...

30

Airborne gamma-ray spectrometer and magnetometer survey: Mitchell Quadrangle, South Dakota. Final report  

SciTech Connect

The results of a high-sensitivity aerial gamma-ray spectrometer survey of the Mitchell Quadrangle, South Dakota are presented. Instrumentation and methods are described in volume 1 of this report. The purpose of this study is to acquire and compile geologic information to assess the magnitude and distribution of uranium resources and to determine areas favorable for the occurrence of uranium in the US. (DMC)

1981-04-01T23:59:59.000Z

31

Airborne gamma-ray spectrometer and magnetometer survey, New Rockford Quadrangle, North Dakota. Final report  

Science Conference Proceedings (OSTI)

An airborne high sensitivity gamma-ray spectrometer and magnetometer survey was conducted over eleven (11) 2/sup 0/ x 1/sup 0/ NTMS quadrangles located in the states of Minnesota and Wisconsin and seven (7) 2/sup 0/ x 1/sup 0/ NTMS quadrangles in North and South Dakota. The quadrangles located within the North and South Dakota survey area include Devil's Lake, New Rockford, Jamestown, Aberdeen, Huron, Mitchell, and Sioux Falls. This report discusses the results obtained over the New Rockford map area. Traverse lines were flown in an east-west direction at a line spacing of six (6) miles. Tie lines were flown north-south approximately twenty-four (24) miles apart. A total of 21,481 line miles of geophysical data were acquired, compiled, and interpreted during the survey, of which 1397 line miles are in this quadrangle. The purpose of this study is to acquire and compile geologic and other information with which to assess the magnitude and distribution of uranium resources and to determine areas favorable for the occurrence of uranium in the United States.

Not Available

1981-04-01T23:59:59.000Z

32

Airborne gamma-ray spectrometer and magnetometer survey, Mitchell Quadrangle, South Dakota. Final report  

SciTech Connect

An airborne high sensitivity gamma-ray spectrometer and magnetometer survey was conducted over eleven (11) 2/sup 0/ x 1/sup 0/ NTMS quadrangles located in the states of Minnesota and Wisconsin and seven (7) 2/sup 0/ x 1/sup 0/ NTMS quadrangles in North and South Dakota. The quadrangles located within the North and South Dakota survey area include Devil's Lake, New Rockford, Jamestown, Aberdeen, Huron, Mitchell, and Sioux Falls. This report discusses the results obtained over the Mitchell map area. The purpose of this program is to acquire and compile geologic and other information with which to assess the magnitude and distribution of uranium resources and to determine areas favorable for the occurrence of uranium in the United States. Traverse lines were flown in an east-west direction at a line spacing of six (6) miles. Tie lines were flown north-south approximately twenty-four (24) miles apart. A total of 21,481 line miles of geophysical data were acquired, compiled, and interpreted during the survey, of which 1479 line miles are in this quadrangle.

Not Available

1981-04-01T23:59:59.000Z

33

Airborne gamma-ray spectrometer and magnetometer survey: Huron quadrangle, South Dakota. Final report  

Science Conference Proceedings (OSTI)

An airborne high sensitivity gamma-ray spectrometer and magnetometer survey was conducted over eleven (11) 2/sup 0/ x 1/sup 0/ NTMS quadrangles located in the states of Minnesota and Wisconsin and seven (7) 2/sup 0/ x 1/sup 0/ NTMS quadrangles in North and South Dakota. The quadrangles located within the North and South Dakota survey area include Devil's Lake, New Rockford, Jamestown, Aberdeen, Huron, Mitchell, and Sioux Falls. This report discusses the results obtained over the Huron map area. Traverse lines were flown in an east-west direction at a line spacing of six (6) miles. Tie lines were flown north-south approximately twenty-four (24) miles apart. A total of 21,481 line miles of geophysical data were acquired, compiled, and interpreted during the survey, of which 1459 line miles are in this quadrangle. The purpose of this study is to acquire and compile geologic and other information with which to assess the magnitude and distribution of uranium resources and to determine areas favorable for the occurrence of uranium in the United States.

Not Available

1981-04-01T23:59:59.000Z

34

FINAL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 FINAL ENVIRONMENTAL ASSESSMENT FOR EXIDE TECHNOLOGIES ELECTRIC DRIVE VEHICLE BATTERY AND COMPONENT MANUFACTURING INITIATIVE APPLICATION, BRISTOL, TN, AND COLUMBUS, GA U.S. Department of Energy National Energy Technology Laboratory March 2010 DOE/EA-1712 FINAL ENVIRONMENTAL ASSESSMENT FOR EXIDE TECHNOLOGIES ELECTRIC DRIVE VEHICLE BATTERY AND COMPONENT MANUFACTURING INITIATIVE APPLICATION, BRISTOL, TN, AND COLUMBUS, GA U.S. Department of Energy National Energy Technology Laboratory March 2010 DOE/EA-1712 iii COVER SHEET Responsible Agency: U.S. Department of Energy (DOE) Title: Environmental Assessment for Exide Technologies Electric Drive Vehicle Battery and Component Manufacturing Initiative Application, Bristol, TN, and Columbus, GA

35

FINAL REPORT FOR INDEPENDENT CONFIRMATORY SURVEY SUMMARY AND RESULTS FOR THE HEMATITE DECOMMISSIONING PROJECT, FESTUS, MISSOURI  

SciTech Connect

ORAU conducted confirmatory surveys of the Hematite site during the period of June 12 through June 13, 2012. The survey activities included in-process inspections, document review, walkover surveys, sampling activities, and laboratory analysis of split samples. WEC was forthcoming with information relating to practices, procedures, and surface scan results. Scans performed by the WEC technician were extremely thorough and methodical. The WEC and ORAU technicians identified the same areas of elevated activity with comparable detector responses. WEC sampling of re-use soils, waste soils, sediments, and groundwater were conducted under ORAU observation. The sampling efforts observed by ORAU were performed in accordance with site-specific procedures and in a manner sufficient to provide quality supporting data. Three observations were made during groundwater sampling activities. First, the water level indicator was re-used without submitting rinse blank. Second, bubbles created during tubing extraction could indicate the presence of volatilized organic compounds. Third, samplers did not use a photo ionization detector prior to sample collection to indicate the presence of volatile organic vapors. Results of split samples indicated a high level of comparability between the WEC and ORAU/ORISE radiological laboratories. Analytical practices and procedures appear to be sufficient in providing quality radiochemical data. All concentrations from the Soil Re-Use Area and sediment samples are below Uniform radionuclide-specific derived concentration guideline level (DCGL{sub W}) limits; thus, comparisons to the less conservative stratified geometry were not required. Results were compared to individual DCGLs and using the sum of fractions approach. Both composite soil samples collected from the Waste Handling Area (Bins 1 and 4) were well below the prescribed USEI waste acceptance criteria.

Bailey, Erika N.; Lee, Jason D.

2012-09-21T23:59:59.000Z

36

Letter Report - Verification Survey of Final Grids at the David Witherspoon, Inc. 1630 Site Knoxville, Tennessee  

Science Conference Proceedings (OSTI)

Conduct verification surveys of grids at the DWI 1630 Site in Knoxville, Tennessee. The independent verification team (IVT) from ORISE, conducted verification activities in whole and partial grids, as completed by BJC. ORISE site activities included gamma surface scans and soil sampling within 33 grids; G11 through G14; H11 through H15; X14, X15, X19, and X21; J13 through J15 and J17 through J21; K7 through K9 and K13 through K15; L13 through L15; and M14 through M16

P.C. Weaver

2009-02-17T23:59:59.000Z

37

Survey and update of F-14a mission profiles for TF30 engine usage. Final report  

SciTech Connect

The mission profiles and maintenance procedures relating to the TF30-P-412 engines have been investigated to find out whether an observed reduction in engine usage was due to different aircraft missions or new flight procedures. A survey of fleet squadron personnel revealed mission profiles are essentially the same; however, fewer air combat engagements and landing practices account for the lower usage. The F-14 role is now more evenly distributed between air combat and intercepts, while the total number of these missions remains constant. A future advanced technology engine in this aircraft is likely to encounter higher usage requirements if there are no throttle cycle restrictions.

Cote, S.M.

1982-04-30T23:59:59.000Z

38

Airborne gamma-ray spectrometer and magnetometer survey Coos Bay, Oregon. Final report  

Science Conference Proceedings (OSTI)

During the months of August, September, and October of 1980, Aero Service Division Western Geophysical Company of America conducted an airborne high sensitivity gamma-ray spectrometer and magnetometer survey over ten (10) areas over northern California and southwestern Oregon. These include the 2/sup 0/ x 1/sup 0/ NTMS quadrangles of Roseburg, Medford, Weed, Alturas, Redding, Susanville, Ukiah, and Chico along with the 1/sup 0/ x 2/sup 0/ areas of the Coos Bay quadrangle and the Crescent City/Eureka areas combined. This report discusses the results obtained over the Coos Bay, Oregon, map area. Line spacing was generally six miles for east/west traverses and eighteen miles for north/south tie lines over the northern one-half of the area. Traverses and tie lines were flown at three miles and twelve miles respectively over the southern one-half of the area. A total of 16,880.5 line miles of geophysical data were acquired, compiled, and interpreted during the survey, of which 863.8 line miles are in this quadrangle.

Not Available

1981-05-01T23:59:59.000Z

39

Airborne gamma-ray spectrometer and magnetometer survey, Medford Quadrangle Oregon. Final report  

Science Conference Proceedings (OSTI)

An airborne high sensitivity gamma-ray spectrometer and magnetometer survey was conducted over ten (10) areas over northern California and southwestern Oregon. These include the 2/sup 0/ x 1/sup 0/ NTMS quadrangles of Roseburg, Medford, Weed, Alturas, Redding, Susanville, Ukiah, and Chico along with the 1/sup 0/ x 2/sup 0/ areas of the Coos Bay quadrangle and the Crescent City/Eureka areas combined. This report discusses the results obtained over the Medford, Oregon, map area. Traverse lines were flown in an east-west direction at a line spacing of three miles. Tie lines were flown north-south approximately twelve miles apart. A total of 16,880.5 line miles of geophysical data were acquired, compiled, and interpreted during the survey, of which 2925 line miles are in this quadrangle. The purpose of this study is to acquire and compile geologic and other information with which to assess the magnitude and distribution of uranium resources and to determine areas favorable for the occurrence of uranium in the United States.

Not Available

1981-04-01T23:59:59.000Z

40

US Navy mobility fuels: Worldwide survey and analysis of both commercial and Navy fuels. Final report  

SciTech Connect

Quality and worldwide availability of distillate fuels have become increasing concerns to the U.S. Department of Defense. In response to these concerns, the David Taylor Research Center (DTRC) has conducted a worldwide survey of such fuels through a contract with the National Institute for Petroleum and Energy Research (NIPER). Representative fuels were collected at both Navy and commercial ports around the world through a NIPER subcontract to ABS Worldwide Technical Services (ABSTECH). The collected fuels were Naval Distillate Fuel (MIL-F-16884H, NATO F-76), Marine Gas Oil (MGO), Heavy Marine Gas Oil (HMGO), and Marine Diesel Fuel (MDF) for the Navy; Automotive/Truck Diesel for the Army; and Aviation Turbine Fuel (MIL-T-5624L, NATO JP-5) for the Naval Air Propulsion Center. The Navy F-76 fuel samples were characterized at NIPER by 44 different fuel property analyses.

Woodward, P.W.; Shay, J.Y.

1989-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Final  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, , Final for Vegetation Control at VHF Stations, Microwave Stations, Electrical Substations, and Pole Yards . Environmental Assessment Prepared for Southwestern Power Administration U.S. Department of Energy - _ . . . " Prepared by Black & Veatch October 13,1995 ' Table of Contents 1 . 0 Purpose and Need for Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 Description of the Alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Alternative 1 . No Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Alternative 2 . Mechanical and Manual Control . . . . . . . . . . . . . . . . . . . 2.3 Alternative 3 . Proposed Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.1 Foliar Spray Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.2 Soil-Spot Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

Final Report Independent Verification Survey of the High Flux Beam Reactor, Building 802 Fan House Brookhaven National Laboratory Upton, New York  

Science Conference Proceedings (OSTI)

On May 9, 2011, ORISE conducted verification survey activities including scans, sampling, and the collection of smears of the remaining soils and off-gas pipe associated with the 802 Fan House within the HFBR (High Flux Beam Reactor) Complex at BNL. ORISE is of the opinion, based on independent scan and sample results obtained during verification activities at the HFBR 802 Fan House, that the FSS (final status survey) unit meets the applicable site cleanup objectives established for as left radiological conditions.

Evan Harpeneau

2011-06-24T23:59:59.000Z

43

Racial Framing and the Multiracial Movement  

E-Print Network (OSTI)

In the 1990s, multiracial advocacy organizations emerged as a national movement. The primary purpose of this movement was to obtain recognition of multiracial identity by the U.S. government. Though possessing a common goal, the organizations within the movement advocated for multiracialism through different racial frames. Using extended case methodology, this study seeks to identify the racial frames utilized by the multiracial movement. Through in-depth interviews with founders and presidents, current and past, of multiracial advocacy organizations, I extend the current literature on racial framing. After critical analysis of my interviews, I identify the presence of the traditional white racist frame as well as a racial counter-frame. Reviewing the elements of both frameworks, I discuss how the use of these frames affects the struggle for racial justice in the United States. Finally, using Bell's principle of interest convergence, I conclude with an examination of how the utilization of the traditional white racist frame by the multiracial movement and the interest of whites in maintaining social domination resulted in the "mark all that apply" decision by the Office and Management and Budget.

Couch, Todd Christopher

2011-05-01T23:59:59.000Z

44

Energy survey of Army Laundry Facilities, Fort Bragg, North Carolina. Executive summary. Final report  

SciTech Connect

This Final Report details Energy Conservation Opportunities (ECOs) for the Laundry and Boiler Plant at Fort Bragg, North Carolina. The ECOs noted in the table on the next page were evaluated for individual energy savings and are recommended for implementation. The energy savings and implementation costs for each measure are summarized on the following page in order of decreasing savings-to-investment (SIR) ratio. ECIP life cycle cost analyses were performed on all ECOs as a preliminary step, though all of the measures will fall into other funding categories. Because of the high internal heat gain produced in the Laundry, coupled with the fact that the laundry is not air conditioned, building envelope measures do not produce any energy savings. The most viable ECOs are related to the Boiler Plant (Boiler Replacement), recovering energy wasted in the wash water (Rinse Water Reuse) or utilizing Low Temperature Wash Water, and Changing the Hours of Laundry Operation. Additional operation and maintenance items are listed that can be addressed by the Directorate of Engineering and Housing (DEH) or the Laundry contractor, Integrity Management International, Inc., to generate quick energy savings. There are also several items included that will not produce energy savings but will improve the comfort level of the Laundry. These items should be given consideration as a method of improving productivity and/or employee morale. All ECOs evaluated by the project team are described in detail with engineering calculations for each following in Appendix 2.

1985-12-31T23:59:59.000Z

45

Fourteenth Annual National Survey of Compensation Paid to Scientists and Engineers Engaged in Research and Development Activities in the United States. Phase XV. Final report  

Science Conference Proceedings (OSTI)

This report summarizes the conduct of the Fourteenth Annual National Survey of Compensation Paid to Scientists and Engineers Engaged in Research and Development Activities. This survey utilizes the survey design developed for the first annual survey, taking into account the DOE acceptances and modification of the recommendations contained in Battelle's Columbus Laboratories final report of the previous surveys. The contract scope of work specified that the survey should obtain information concerning compensation and compensation-related characteristics of both nondegreed and degreed scientists and engineers engaged in research and development. Information was to be obtained concerning both the employees and employers. The survey variables for which information was to be obtained were specified. As before, the universe specifications were to encompass industrial establishments, educational institutions, nonprofit research institutes, federal laboratories and federally funded research and development centers. The sampling plan was to be the same as for the previous surveys. The sample size was to be maintained at approximately 300 to 325 establishments. The sampling plan incorporated stratification and clustering based upon: (1) establishment size in terms of numbers of scientists and engineers employed; and (2) size of the Standard Metropolitan Statistical Area (SMSA) in terms of scientists and engineers in the area. Trend analyses, showing changes in salary levels over a five-year period, were to be prepared. Tabulated results of the survey are presented.

Spurgeon, M.; Evans, P.; Beatty, G.H.; Arnold, L.

1981-12-31T23:59:59.000Z

46

Frame dragging and superenergy  

Science Conference Proceedings (OSTI)

We show that the vorticity appearing in stationary vacuum spacetimes is always related to the existence of a flow of superenergy on the plane orthogonal to the vorticity vector. This result, together with the previously established link between vorticity and superenergy in radiative (Bondi-Sachs) spacetimes, strengthens further the case for this latter quantity as the cause of frame dragging.

Herrera, L.; Di Prisco, A. [Escuela de Fisica, Facultad de Ciencias, Universidad Central de Venezuela, Caracas (Venezuela); Carot, J. [Departament de Fisica, Universitat Illes Balears, E-07122 Palma de Mallorca (Spain)

2007-08-15T23:59:59.000Z

47

Handbook of normal frames and coordinates  

E-Print Network (OSTI)

The main subject of the book is an up-to-date and in-depth survey of the theory of normal frames and coordinates in differential geometry. The book can be used as a reference manual, review of the existing results and introduction to some new ideas and developments. In the book can be found practically all existing essential results and methods concerning normal frames and coordinates. Most of the results are represented in full detail with full, in some cases new, proofs. All classical results are expanded and generalized in various directions. Theorems of existence, uniqueness and, possibly, holonomicity of the normal frames and coordinates are proved; mostly, the proofs are constructive and some their parts can be used independently for other tasks. Besides published results, their extensions and generalizations, the book contains completely new results which appear for the first time.

Bozhidar Z. Iliev

2006-10-01T23:59:59.000Z

48

Final report of the radiological release survey of Building 30B at the Grand Junction Office Facility  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) Grand Junction Office (GJO) occupies a 61.7-acre facility along the Gunnison River near Grand Junction, Colorado. This site was contaminated with uranium ore concentrates and mill tailings during vanadium refining activities of the Manhattan Engineer District, and during sampling, assaying, pilot milling, storage, and brokerage activities conducted for the U.S. Atomic Energy Commission`s domestic uranium procurement program. The DOE Defense Decontamination and Decommissioning Program established the GJO Remedial Action Project (GJORAP) to clean up and restore the facility lands, improvements, and underlying aquifer. WASTREN-Grand Junction is the site contractor for the facility and the remedial action contractor for GJORAP. Building 30B and the underlying soil were found not to be radiologically contaminated; therefore, the building can be released for unrestricted use. Placards have been placed at the building entrances indicating the completion of the radiological release survey and prohibiting the introduction of any radioactive materials within the building without written approvals from the GJO Facilities Operations Manager. This document was prepared in response to a DOE-GJO request for an individual final release report for each GJO building.

Krauland, P.A.; Corle, S.G.

1997-09-01T23:59:59.000Z

49

Frame Heat Transfer Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Developing Low-Conductance Window Frames: Capabilities and Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools Arild Gustavsen 1,* , Dariush Arasteh 2 , Bjørn Petter Jelle 3,4 , Charlie Curcija 5 and Christian Kohler 2 1 Department of Architectural Design, History and Technology, Norwegian University of Science and Technology, Alfred Getz vei 3, NO-7491 Trondheim, Norway 2 Windows and Daylighting Group, Lawrence Berkeley National Laboratory, 1 Cyclotron Road Mail Stop 90R3111, Berkeley, CA 94720- 8134, USA 3 Department of Civil and Transport Engineering, Norwegian University of Science and Technology, Høgskoleringen 7A, NO-7491 Trondheim, Norway 4 Department of Building Materials and Structures, SINTEF Building and Infrastructure, Høgskoleringen 7B,NO-7465 Trondheim, Norway

50

EV Everywhere Framing Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

EV Everywhere Framing Workshop EV Everywhere Framing Workshop David Sandalow Under Secretary of Energy (Acting) Assistant Secretary for Policy and International Affairs U.S. Department of Energy Dearborn, Michigan June 21, 2012 2 | U.S. Department of Energy energy.gov Transportation sector depends on oil Transportation sector depends on oil Petroleum 94% Natural Gas < 1% Biofuels 5% U.S. Transportation Fuel Share Gasoline prices are high Current Avg. $3.53 (as of June 18)* High gasoline prices are a burden on American families. *Source: EIA 3 | U.S. Department of Energy energy.gov U.S. oil import bill is almost $1 billion per day U.S. oil import bill is almost $1 billion per day http://www.eia.gov/petroleum/data.cfm#imports 4 | U.S. Department of Energy energy.gov

51

FINAL ENVIRONMENTAL BASELINE SURVEY  

E-Print Network (OSTI)

Electric Code Fuel Cell Systems (Published) NFPA 110 Standby Power Systems (Published) NFPA Codes Fuel) NFPA 70 Article 692 National Electric Code Fuel Cell Systems (Published) NFPA 110 Standby Power Systems by 2007. Support and facilitate the effort, led by the National Fire Protection Association (NFPA

Christian, Eric

52

Electrically insulating and sealing frame  

DOE Patents (OSTI)

A combination gas seal and electrical insulator having a closed frame shape interconnects a fuel cell stack and a reactant gas plenum of a fuel cell generator. The frame can be of rectangular shape including at least one slidable spline connection in each side to permit expansion or contraction consistent with that of the walls of the gas plenum and fuel cell stack. The slidable spline connections in the frame sides minimizes lateral movement between the frame side members and sealing material interposed between the frame and the fuel cell stack or between the frame and the reactant gas plenum.

Guthrie, Robin J. (East Hartford, CT)

1983-11-08T23:59:59.000Z

53

Einstein and Jordan frames reconciled: a frame-invariant approach to scalar-tensor cosmology  

E-Print Network (OSTI)

Scalar-Tensor theories of gravity can be formulated in different frames, most notably, the Einstein and the Jordan one. While some debate still persists in the literature on the physical status of the different frames, a frame transformation in Scalar-Tensor theories amounts to a local redefinition of the metric, and then should not affect physical results. We analyze the issue in a cosmological context. In particular, we define all the relevant observables (redshift, distances, cross-sections, ...) in terms of frame-independent quantities. Then, we give a frame-independent formulation of the Boltzmann equation, and outline its use in relevant examples such as particle freeze-out and the evolution of the CMB photon distribution function. Finally, we derive the gravitational equations for the frame-independent quantities at first order in perturbation theory. From a practical point of view, the present approach allows the simultaneous implementation of the good aspects of the two frames in a clear and straightforward way.

R. Catena; M. Pietroni; L. Scarabello

2006-04-24T23:59:59.000Z

54

VIOLENT FRAMES IN ACTION  

Science Conference Proceedings (OSTI)

We present a computational approach to radical rhetoric that leverages the co-expression of rhetoric and action features in discourse to identify violent intent. The approach combines text mining and machine learning techniques with insights from Frame Analysis and theories that explain the emergence of violence in terms of moral disengagement, the violation of sacred values and social isolation in order to build computational models that identify messages from terrorist sources and estimate their proximity to an attack. We discuss a specific application of this approach to a body of documents from and about radical and terrorist groups in the Middle East and present the results achieved.

Sanfilippo, Antonio P.; McGrath, Liam R.; Whitney, Paul D.

2011-11-17T23:59:59.000Z

55

A Birthday Party Frame System  

E-Print Network (OSTI)

This paper is an experimental investigation of the utility of the MIT-AI frames system. Using this system, a birthday party planning system was written, representing the basic decisions that comprise such a plan as frames. ...

Clemenson, Gregory D.

56

Energy Conditions in Jordan Frame  

E-Print Network (OSTI)

The null energy condition, in its usual form, can appear to be violated by transformations in the conformal frame of the metric. We propose a generalization of the form of the null energy condition to Jordan frame, in which matter is non-minimally coupled, which reduces to the familiar form in Einstein frame. Using our version of the null energy condition, we provide a direct proof of the second law of black hole thermodynamics in Jordan frame.

Saugata Chatterjee; Damien A. Easson; Maulik Parikh

2012-12-27T23:59:59.000Z

57

MTS Table Top Load frame  

NLE Websites -- All DOE Office Websites (Extended Search)

MTS Table Top Load frame MTS Table Top Load frame The Non-destructive Evaluation group operates an MTS Table Top Load frame for ultimate strength and life cycle testing of various ceramic, ceramic-matrix (FGI), carbon, carbon fiber, cermet (CMC) and metal alloy engineering samples. The load frame is a servo-hydraulic type designed to function in a closed loop configuration under computer control. The system can perform non-cyclic, tension, compression and flexure testing and cyclic fatigue tests. The system is comprised of two parts: * The Load Frame and * The Control System. Load Frame The Load Frame (figure 1) is a cross-head assembly which includes a single moving grip, a stationary grip and LVDT position sensor. It can generate up to 25 kN (5.5 kip) of force in the sample under test and can

58

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.5 Household Demographics of U.S....

59

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.8 Household Demographics of Homes...

60

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.1 Household Demographics of U.S....

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.7 Household Demographics of U.S....

62

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.6 Household Demographics of U.S....

63

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.3 Household Demographics of U.S....

64

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.4 Household Demographics of U.S....

65

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.11 Household Demographics of Homes...

66

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.10 Household Demographics of Homes...

67

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.9 Household Demographics of Homes...

68

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC9.2 Household Demographics of U.S....

69

Flathead Lake Angler Survey; Monitoring Activities for the Hungry Horse Fisheries Mitigation Plan, 1992-1993 Final Report.  

DOE Green Energy (OSTI)

A roving creel survey was conducted on Flathead Lake in northwestern Montana from May 17, 1992 to May 19, 1993. The primary objective of the survey was to quantify the baseline fishery and exploitation rates existing prior to Hungry Horse Dam mitigation efforts. Anglers were counted on 308 occasions, comprising 5,618 fishing boats, 515 shore anglers, and 2,191 ice anglers. The party interviews represented 4,410 anglers, made up of 2,613 boat anglers, 787 shore anglers, and 1,010 ice anglers. A total of 47,883 angler days (190,108 angler hours) of pressure and a harvest of 42,979 fish (including lake trout, lake whitefish, yellow perch, bull trout, and westslope cutthroat trout) were estimated. Pressure was distributed between shore, boat, and ice anglers as 4%, 87%, and 9%, respectively. Seventynine percent of the total effort was directed at lake trout during the study period. Limited comparisons were made to previous creel surveys on Flathead Lake due to differences in methods and radical changes in the fishery. Potential sources of bias are explained in detail. Future creel surveys must employ methods consistent with this survey to obtain estimates that are statistically distinguishable.

Evarts, Les; Hansen, Barry; DosSantos, Joe (Confederated Salish and Kootenai Tribes of the Flathead Nation, Pablo, MT)

1994-02-01T23:59:59.000Z

70

Summary Report for Bureau of Fisheries Stream Habitat Surveys: Cowlitz River Basin, 1934-1942 Final Report.  

DOE Green Energy (OSTI)

This document contains summary reports of stream habitat surveys, conducted in the Cowlitz River basin, by the Bureau of Fisheries (BOF, now National Marine Fisheries Service) from 1938-1942. These surveys were part of a larger project to survey streams in the Columbia River basin that provided, or had provided, spawning and rearing habitat for salmon and steelhead. The purpose of the survey was, as described by Rich, [open quotes]to determine the present condition of the various tributaries with respect to their availability and usefulness for the migration, breeding, and rearing of migratory fishes[close quotes]. Current estimates of the loss of anadromous fish habitat in the Columbia River Basin are based on a series of reports published from 1949-1952 by the U.S. Fish and Wildlife Service. The reports were brief, qualitative accounts of over 5000 miles of stream surveys conducted by the BOF from 1934-1946. Despite their brevity, these BOF reports have formed the basis for estimating fish habitat losses and conditions in the Columbia River Basin.

McIntosh, Bruce A.; Clark, Sharon E.; Sedell, James R.

1995-01-01T23:59:59.000Z

71

NURE aerial gamma-ray and magnetic-reconnaissance survey portions of New Mexico, Arizona, and Texas. Volume I. Instrumentation and data reduction. Final report  

Science Conference Proceedings (OSTI)

As part of the Department of Energy (DOE) National Uranium Resource Evaluation Program, a rotary-wing high sensitivity radiometric and magnetic survey was flown covering portions of the State of New Mexico, Arizona and Texas. The survey encompassed six 1:250,000 scale quadrangles, Holbrook, El Paso, Las Cruces, Carlsbad, Fort Sumner and Roswell. The survey was flown with a Sikorsky S58T helicopter equipped with a high sensitivity gamma ray spectrometer which was calibrated at the DOE calibration facilities at Walker Field in Grand Junction, Colorado, and the Dynamic Test Range at Lake Mead, Arizona. The radiometric data were processed to compensate for Compton scattering effects and altitude variations. The data were normalized to 400 feet terrain clearance. The reduced data is presented in the form of stacked profiles, standard deviation anomaly plots, histogram plots and microfiche listings. The results of the geologic interpretation of the radiometric data together with the profiles, anomaly maps and histograms are presented in the individual quadrangle reports. The survey was awarded to LKB Resources, Inc. which completed the data acquisition. In April, 1980 Carson Helicopters, Inc. and Carson Geoscience Company agreed to manage the project and complete delivery of this final report.

Not Available

1981-09-01T23:59:59.000Z

72

Advanced Wall Framing; BTS Technology Fact Sheet  

SciTech Connect

Advanced framing techniques for home construction have been researched extensively and proven effective. Both builders and home owners can benefit from advanced framing. Advanced framing techniques create a structurally sound home that has lower material and labor costs than a conventionally framed house. This fact sheet describes advanced framing techniques, design considerations, and framing.

Southface Energy Institute; Tromly, K.

2000-11-07T23:59:59.000Z

73

Problem frames and software engineering  

Science Conference Proceedings (OSTI)

A general account is given of the problem frames approach to the development of software-intensive systems, assuming that the reader is already familiar with its basic ideas. The approach is considered in the light of the long-standing aspiration of ... Keywords: Problem frame, Problems, Software

Michael Jackson

2005-11-01T23:59:59.000Z

74

DSM (demand-side management) commercial customer acceptance: Volume 2, Survey and database documentation: Final report. [Demand-side management  

SciTech Connect

A survey was conducted among utility DSM (demand-side management) program managers to gather information on the characteristics of commercial sector programs. The survey data were used in part to identify the important factors that influence customer participation in such programs. Information was gathered in the following general areas of interest: (1) program characteristics (e.g., program type, objectives, status, etc.); (2) marketing characteristics (e.g., promotional mechanisms, budget, goals, etc.); (3) customer eligibility and participation (e.g., characteristics of the eligible population, participation by customer category, etc.); and (4) market research information (e.g., the data that pertain to the effectiveness of the progress). The survey obtained information on 108 DSM programs covering a broad range of options, including audits, non-audit information, financial incentive, direct load control, distributed local control, thermal energy storage, time-of-use rates, and other rate programs. Program planners can use the survey database, presented in its entirety in this report, to identify utilities that have already implemented DSM programs of interest and to learn from their experience.

George, S.S.; Kirksey, W.E.; Skelton, J.C.

1988-04-01T23:59:59.000Z

75

Michigan residential No. 2 fuel oil and propane price survey for the 1990/91 heating season. Final report  

Science Conference Proceedings (OSTI)

This report summarizes the results of a survey of home heating oil and propane prices over the 1990/1991 heating season in Michigan. The survey was conducted under a cooperative agreement between the State of Michigan, Michigan Public Service Commission and the US Department of Energy (DOE), Energy Information Administration (EIA), and was funded by a grant from EIA. From October 1990 through May 1991, participating dealers/distributions were called and asked for their current residential retail prices of No. 2 home heating oil and propane. This information was then transmitted to the EIA, bi-monthly using an electronic reporting system called Petroleum Data Reporting Option (PEDRO). The survey was conducted using a sample provided by EIA of home heating oil and propane retailers which supply Michigan households. These retailers were contacted the first and third Mondays of each month. The sample was designed to account for distributors with different sales volumes, geographic distributions and sources of primary supply. It should be noted that this simple is different from the sample used in prior year surveys.

Not Available

1991-10-01T23:59:59.000Z

76

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report  

Science Conference Proceedings (OSTI)

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01T23:59:59.000Z

77

Summary Report for Bureau of Fisheries Stream Habitat Surveys : Yakima River Basin, 1934-1942, Final Report.  

DOE Green Energy (OSTI)

This document contains summary reports of stream habitat surveys, conducted in the Yakima River basin, by the Bureau of Fisheries (BOF, now National Marine Fisheries Service) from 1934-1942. These surveys were part of a larger project to survey streams in the Columbia River basin that provided, or had provided, spawning and rearing habitat for salmon and steelhead (Rich, 1948). The purpose of the survey was, as described by Rich, 'to determine the present condition of the various tributaries with respect to their availability and usefulness for the migration, breeding, and rearing of migratory fishes'. Current estimates of the loss of anadromous fish habitat in the Columbia River Basin are based on a series of reports published from 1949-1952 by the U.S. Fish and Wildlife Service. The reports were brief, qualitative accounts of over 5000 miles of stream surveys conducted by the BOF from 1934-1946 (Bryant, 1949; Bryant and Parkhurst, 1950; Parkhurst, 1950a-c; Parkhurst et al., 1950). Despite their brevity, these BOF reports have formed the basis for estimating fish habitat losses and conditions in the Columbia River Basin (Fulton, 1968, 1970; Thompson, 1976; NPPC, 1986). Recently, the field notebooks from the BOF surveys were discovered. The data is now archived and stored in the Forest Science DataBank at Oregon State University (Stafford et al., 1984; 1988). These records are the earliest and most comprehensive documentation available of the condition and extent of anadromous fish habitat before hydropower development in the Columbia River Basin. They provide the baseline data for quantifying changes and setting a benchmark for future restoration of anadromous fish habitat throughout the Basin. The summaries in this book are exact replicates of the originals. Due to discrepancies between the field data and the summaries, the database should be used to assess pool and substrate conditions. This data is available from the Bonneville Power Administration. The Bureau of Fisheries survey is unique because it is the only long-term data set that quantifies fish habitat in a manner that is replicable over time; no other similar work is known to exist. Other surveys, such as Thompson and Haas (1960), inventoried extensive areas in a manner that was mostly qualitative, subjectively estimating physical characteristics like bank cover and stream shading. Spawning, rearing, and resting habitat were not systematically quantified to allow comparisons over time. Knowledge of the past and present quantity and quality of anadromous fish habitat in the Columbia River Basin is essential to any effort to enhance fish populations. Habitat condition is a key element in monitoring and evaluating progress towards the doubling goal. Integration of this information into the Columbia River Fish and Wildlife Plan can provide the baseline information to greatly enhance understanding of past, present, and future habitat conditions in the basin to provide for improved management decisions.

McIntosh, Bruce A.; Clark, Sharon E.; Sedell, James R.

1996-01-01T23:59:59.000Z

78

Summary Report for Bureau of Fisheries Stream Habitat Surveys : Willamette River Basin, 1934-1942, Final Report.  

DOE Green Energy (OSTI)

This document contains summary reports of stream habitat-surveys, conducted in the Willamette River basin, by the Bureau of Fisheries (BOF, now National Marine Fisheries Service) from 1934-1942. These surveys were part of a larger project to survey streams in the Columbia River basin that provided, or had provided, spawning and rearing habitat for salmon and steelhead (Rich, 1948). The purpose of the survey was, as described by Rich, 'to determine the present condition of the various tributaries with respect to their availability and usefulness for the migration, breeding, and rearing of migratory fishes'. Current estimates of the loss of anadromous fish habitat in the Columbia River Basin are based on a series of reports published from 1949-1952 by the U.S. Fish and Wildlife Service. The reports were brief, qualitative accounts of over 5000 miles of stream surveys conducted by the BOF from 1934-1946 (Bryant, 1949; Bryant and Parkhurst, 1950; Parkhurst, 1950a-c; Parkhurst et al., 1950). Despite their brevity, these BOF reports have formed the basis for estimating fish habitat losses and conditions in the Columbia River Basin (Fulton, 1968, 1970; Thompson, 1976; NPPC, 1986). Recently, the field notebooks from the BOF surveys were discovered. The data is now archived and stored in the Forest Science DataBank at Oregon State University (Stafford et al., 1984; 1988). These records are the earliest and most comprehensive documentation available of the condition and extent of anadromous fish habitat before hydropower development in the Columbia River Basin. They provide the baseline data for quantifying changes and setting a benchmark for future restoration of anadromous fish habitat throughout the Basin. The summaries contained in this book are exact replicates of the originals. Due to discrepancies between the field data and the summaries, the database should be used to assess pool and substrate conditions. This data is available from the Bonneville Power Administration. The Bureau of Fisheries survey is unique because it is the only long-term data set that quantifies fish habitat in a manner that is replicable over time; no other similar work is known to exist. Other surveys, such as Thompson and Haas (1960), inventoried extensive areas in a manner that was mostly qualitative, subjectively estimating physical characteristics like bank cover and stream shading. Spawning, rearing, and resting habitat were not systematically quantified to allow comparisons over time. Knowledge of past and present quantity and quality of anadromous fish habitat in the Columbia River Basin is essential to any effort to enhance fish populations. Habitat condition is a key element in monitoring and evaluating progress towards the doubling goal. Integration of this information into the Columbia River Fish and Wildlife Plan can provide the basis to greatly enhance understanding of past, present, and future habitat conditions in the basin to provide for improved management decisions.

McIntosh, Bruce A.; Clark, Sharon E.; Sedell, James R.

1995-01-01T23:59:59.000Z

79

Attitudinal survey of citizens in a potential Gulf Coast geopressured-geothermal test-well locality. Final report  

DOE Green Energy (OSTI)

The results of a mail survey used to tap the opinions of the public at large in the study area are described. Attention in that section is focused on awareness of the resource, favorability toward the impending development, concerns about the development, attitudes regarding how the development should take place, levels of community satisfaction, and perceived future problems due to community growth. An analysis is given of the 33 interviews conducted with local representatives of the financial and commercial sectors, government, industry, agriculture, and environmental groups. The main foci here are perceived problems and benefits associated with geothermal development and the local capacity for coping with strains on community services resulting from any population growth which may be generated by resource development. A comparison and synthesis of the results from the general survey and the sector interviews is included. In conclusion, policy recommendations are made for means through which to consolidate goals and to achieve resource development objectives with minimal antagonism of and problems for local citizens and community sectors.

Lopreato, S.C.; Blissett, M.

1977-05-01T23:59:59.000Z

80

Confirmatory radiological survey of portions of the former A. H. Robins Research Center, Richmond, Virginia. Final report  

SciTech Connect

The former A.H. Robins Research Center, in Richmond, VA, was devoted primarily to the research and development of pharmaceuticals. The use of radionuclides at the A.H. Robins Research Center was first begun in the early 1960s and the facility is now operating under Nuclear Regulatory Commission (NRC) License No. 45-09042-01. A. H. Robins` Drug Metabolism Department used radioactive material (H-3, C-14, Na-22, P-32, S-35, CI-36, Ca-45, Cr-51, Ni-63, Rb-86, I-125, I-129, I-131, and Cs-137) in laboratory tracer studies on animals, for calibration of instrumentation, and for research analyses. The radionuclides were used in various,rooms throughout the facility. Following its acquisition by American Home Products in 1990, radionuclide activities were discontinued at this facility. The process for the termination of the material license for A.H. Robins (AHR) was initiated by the Corporate Radiation Health Safety Officer of Wyeth-Ayerst Research (WAR), another wholly owned subsidiary of American Home Products (AHP). In June 1990, WAR developed and submitted a decommissioning plan to the NRC. A radiological survey of the areas in which radionuclides were known to have been handled was performed to determine the extent of the contamination. During the cleanup and survey of the facility, the licensee identified H-3 and C-14 as the major

Adams, W.C.

1992-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Evaluation of airborne geophysical surveys for large-scale mapping of contaminated mine pools: draft final report  

SciTech Connect

Decades of underground coal mining has left about 5,000 square miles of abandoned mine workings that are rapidly filling with water. The water quality of mine pools is often poor; environmental regulatory agencies are concerned because water from mine pools could contaminate diminishing surface and groundwater supplies. Mine pools are also a threat to the safety of current mining operations. Conversely, mine pools are a large, untapped water resource that, with treatment, could be used for a variety of industrial purposes. Others have proposed using mine pools in conjunction with heat pumps as a source of heating and cooling for large industrial facilities. The management or use of mine pool water requires accurate maps of mine pools. West Virginia University has predicted the likely location and volume of mine pools in the Pittsburgh Coalbed using existing mine maps, structure contour maps, and measured mine pool elevations. Unfortunately, mine maps only reflect conditions at the time of mining, are not available for all mines, and do not always denote the maximum extent of mining. Since 1999, the National Energy Technology Laboratory (NETL) has been evaluating helicopter-borne, electromagnetic sensing technologies for the detection and mapping of mine pools. Frequency domain electromagnetic sensors are able to detect shallow mine pools (depth < 50 m) if there is sufficient contrast between the conductance of the mine pool and the conductance of the overburden. The mine pools (conductors) most confidently detected by this technology are overlain by thick, resistive sandstone layers. In 2003, a helicopter time domain electromagnetic sensor was applied to mined areas in southwestern Virginia in an attempt to increase the depth of mine pool detection. This study failed because the mine pool targets were thin and not very conductive. Also, large areas of the surveys were degraded or made unusable by excessive amounts of cultural electromagnetic noise that obscured the subtle mine pool anomalies. However, post-survey modeling suggested that thicker, more conductive mine pools might be detected at a more suitable location. The current study sought to identify the best time domain electromagnetic sensor for detecting mine pools and to test it in an area where the mine pools are thicker and more conductive that those in southwestern Virginia. After a careful comparison of all airborne time domain electromagnetic sensors (including both helicopter and fixed-wing systems), the SkyTEM system from Denmark was determined to be the best technology for this application. Whereas most airborne time domain electromagnetic systems were developed to find large, deep, highly conductive mineral deposits, the SkyTEM system is designed for groundwater exploration studies, an application similar to mine pool detection.

Geosciences Division, National Energy Technology Laboratory, US Department of Energy, Pittsburgh, PA; Hammack, R.W.

2006-12-28T23:59:59.000Z

82

Wastewater characterization survey, Cannon Air Force Base, New Mexico. Final report, 28 September 1992-9 October 1992  

Science Conference Proceedings (OSTI)

A wastewater characterization survey was conducted at Cannon AFB, New Mexico, from 28 September 1992 - 9 October 1992 by personnel from the Water Quality Branch of Armstrong Laboratory. Extensive sampling of the wastewater lagoon influent, effluent, and sludge was conducted. In addition, 9 industrial sites were sampled in the industrial areas of the base. The average influent biochemical oxygen demand (BOD) was 197 milligrams per liter (mg/1) and the average chemical oxygen demand (COD) was 436 mg/1. The lagoons removed 63% of the BOD in the wastewater. Low levels of metals were found, but levels of oils and greases, chloride, sulfate, solids, nitrogen, and phosphorus were higher than typical of weak wastewater levels. Selenium levels in the wastewater were higher than allowed by New Mexico Water Quality Regulations for irrigation. The new wastewater treatment plant to be built must comply with New Mexico standards for discharges of water into or below the surface of the ground.... Wastewater characterization, Cannon AFB, New Mexico, Selenium, Irrigation, Lagoon, Biochemical oxygen demand, Chemical oxygen demand.

McCoy, R.P.

1993-05-01T23:59:59.000Z

83

Oily-waste-disposal survey, South Tank Farm, Lajes Field, Azores. Final report, 12-17 Jun 90  

Science Conference Proceedings (OSTI)

A survey of the wet and dry sludge pits at the South Tank Farm, Lajes Field, Azores was performed by members of the AFOEHL. Samples of the waste water and sludge from the wet sludge pit (WSP) were taken as well as from the dry sludge pit. Bioremediation studies, incineration, and carbon adsorption studies were performed. The characterization of the waste water from the WSP revealed a one phase mixture of mostly soluble oils and grease with an average COD concentration of 1760 and a BOD of 407 mg/1. Oils and grease concentrations were in the 10 mg/1 range. The characterization of the sludge revealed 43% organics and concentrations of metals not high enough for consideration as hazardous waste. The sludge from the DSP also did not have levels of metals high enough for special disposal as hazardous waste. The WSP waste water was slow to degrade biologically through stimulation of indigenous organisms. Carbon was effective in removing COD. The WSP waste water has subsequently been released to the Praia Bay and the sludge recovered and drummed. Recommendations included the construction of a secondary sewage treatment plant to service the base, airport, and Praia, the construction of a sludge drying facility and testing of the dried sludge for ultimate disposal.

Binovi, R.D.

1991-03-01T23:59:59.000Z

84

Final Report-Confirmatory Survey Results for the ABB Combustion Engineering Site, Windsor, Connecticut; Revision 1 (DCN 5158-SR-02-1) (Docket No. 030-03754; RFTA No. 12-003)  

SciTech Connect

The objectives of the confirmatory activities were to provide independent contractor field data reviews and to generate independent radiological data for use by the NRC in evaluating the adequacy and accuracy of the contractor?s procedures and FSS results. ORAU reviewed ABB CE?s decommissioning plan, final status survey plan, and the applicable soil DCGLs, which were developed based on an NRC-approved radiation dose assessment. The surveys included gamma surface scans, gamma direct measurements, and soil sampling.

ADAMS, WADE C

2013-01-28T23:59:59.000Z

85

A.: Sparse fusion frames: existence and construction  

E-Print Network (OSTI)

Abstract. Fusion frame theory is an emerging mathematical theory that provides a natural framework for performing hierarchical data processing. A fusion frame is a frame-like collection of subspaces in a Hilbert space, thereby generalizing the concept of a frame for signal representation. In this paper, we study the existence and construction of fusion frames. We first present a complete characterization of a special class of fusion frames, called Parseval fusion frames. The value of Parseval fusion frames is that the inverse fusion frame operator is equal to the identity and therefore signal reconstruction can be performed with minimal complexity. We then introduce two general methods – the spatial complement and the Naimark complement – for constructing a new fusion frame from a given fusion frame. We then establish existence conditions for fusion frames with desired properties. In particular, we address the following question: Given M, N, m ? N and {?j} M j=1, does there exist a fusion frame in RM with N subspaces of dimension m for which {?j} M j=1 are the eigenvalues of the associated fusion frame operator? We address this problem by providing an algorithm which computes such a fusion frame for almost any collection of parameters M, N, m ? N and {?j} M j=1. Moreover, we show how this procedure can be applied, if subspaces are to be added to a given fusion frame to force it to become Parseval. 1.

Robert Calderbank; Peter G. Casazza; Andreas Heinecke; Gitta Kutyniok; Ali Pezeshki

2011-01-01T23:59:59.000Z

86

Examining the Linkage Between FRAMES and GMS  

Science Conference Proceedings (OSTI)

Because GMS provides so many features, of which some are also addressed by FRAMES, it could represent a platform to link to FRAMES, or FRAMES could represent a platform to link to GMS. The focus of this summary is to examine the strengths and weaknesses of the potential linkage direction and provide recommendations for the linkage between FRAMES and GMS.

Whelan, Gene; Castleton, Karl J.

2006-02-13T23:59:59.000Z

87

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.10 Space Heating in U.S. Homes in...

88

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.11 Space Heating in U.S. Homes in...

89

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.3 Space Heating in U.S. Homes, by...

90

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.4 Space Heating in U.S. Homes, by...

91

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.1 Space Heating in U.S. Homes, by...

92

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.7 Space Heating in U.S. Homes, by...

93

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.8 Space Heating in U.S. Homes in...

94

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.2 Space Heating in U.S. Homes, by...

95

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.9 Space Heating in U.S. Homes in...

96

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Consumption Survey: Final Housing Characteristics Tables" "Preliminary Release: August 19, 2011" "Final Release: April 2013" "Table HC6.6 Space Heating in U.S. Homes, by...

97

Framed Morse functions on surfaces  

Science Conference Proceedings (OSTI)

Let M be a smooth, compact, not necessarily orientable surface with (maybe empty) boundary, and let F be the space of Morse functions on M that are constant on each component of the boundary and have no critical points at the boundary. The notion of framing is defined for a Morse function f element of F. In the case of an orientable surface M this is a closed 1-form {alpha} on M with punctures at the critical points of local minimum and maximum of f such that in a neighbourhood of each critical point the pair (f,{alpha}) has a canonical form in a suitable local coordinate chart and the 2-form df and {alpha} does not vanish on M punctured at the critical points and defines there a positive orientation. Each Morse function on M is shown to have a framing, and the space F endowed with the C{sup {infinity}-}topology is homotopy equivalent to the space F of framed Morse functions. The results obtained make it possible to reduce the problem of describing the homotopy type of F to the simpler problem of finding the homotopy type of F. As a solution of the latter, an analogue of the parametric h-principle is stated for the space F. Bibliography: 41 titles.

Kudryavtseva, Elena A; Permyakov, Dmitrii A [M. V. Lomonosov Moscow State University, Faculty of Mechanics and Mathematics, Moscow (Russian Federation)

2010-06-09T23:59:59.000Z

98

Advanced House Framing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced House Framing Advanced House Framing Advanced House Framing April 13, 2012 - 7:57pm Addthis Two-story home using advanced framing techniques. Two-story home using advanced framing techniques. Advanced house framing means materials, labor, and heating and cooling cost savings because the approach: Uses less lumber and generates less waste than typical framing methods. Increases energy efficiency by replacing lumber with insulation material, resulting in a higher whole-wall R-value through reduced thermal bridging and increased insulation. How does it work? Advanced framing works structurally by aligning framing members directly over each other to transfer the load from roof trusses or rafters to second floor wall studs, to floor joists, to first floor studs to the foundation,

99

Ultra-fast framing camera tube  

DOE Patents (OSTI)

An electronic framing camera tube features focal plane image dissection and synchronized restoration of the dissected electron line images to form two-dimensional framed images. Ultra-fast framing is performed by first streaking a two-dimensional electron image across a narrow slit, thereby dissecting the two-dimensional electron image into sequential electron line images. The dissected electron line images are then restored into a framed image by a restorer deflector operated synchronously with the dissector deflector. The number of framed images on the tube's viewing screen is equal to the number of dissecting slits in the tube. The distinguishing features of this ultra-fast framing camera tube are the focal plane dissecting slits, and the synchronously-operated restorer deflector which restores the dissected electron line images into a two-dimensional framed image. The framing camera tube can produce image frames having high spatial resolution of optical events in the sub-100 picosecond range.

Kalibjian, Ralph (1051 Batavia Ave., Livermore, CA 94550)

1981-01-01T23:59:59.000Z

100

Building Energy Software Tools Directory: Frame Simulator  

NLE Websites -- All DOE Office Websites (Extended Search)

Frame Simulator Frame Simulator Frame Simulator logo Frame Simulator makes calculation of the thermal transmittance in windows and building components an extremely easy process. It can be used to: analyze how heat flows through building components and fenestrations estimate surface temperatures and predict condensation problems discover weak points in window frames calculate thermal transmittance Uf and linear conductance Lf2d of any type of window frame as well as the Uw thermal transmittance of entire complex fenestration. Precise simulation of the heat transfer is performed using a two-dimensional numerical method for steady state boundary conditions conforming to ISO 10077-2 (finite elements). Screen Shots Keywords 2D, heat transfer, thermal analysis, thermal transmittance, thermal

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Advanced Framing | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

can increase the thermal efficiency of the wall system. Less framing allows more insulation to be installed and also eliminates hot and cold spots (from thermal bridging...

102

1980 survey and evaluation of utility conservation, load management, and solar end-use projects. Volume 3: utility load management projects. Final report  

DOE Green Energy (OSTI)

The results of the 1980 survey of electric utility-sponsored energy conservation, load management, and end-use solar energy conversion projects are described. The work is an expansion of a previous survey and evaluation and has been jointly sponsored by EPRI and DOE through the Oak Ridge National Laboratory. There are three volumes and a summary document. Each volume presents the results of an extensive survey to determine electric utility involvement in customer-side projects related to the particular technology (i.e., conservation, solar, or load management), selected descriptions of utility projects and results, and first-level technical and economic evaluations.

Not Available

1982-01-01T23:59:59.000Z

103

Building Energy Software Tools Directory: FRAME4  

NLE Websites -- All DOE Office Websites (Extended Search)

FRAME4 FRAME4 FRAME4 logo. Uses two-dimensional finite-volume analysis to evaluate heat transfer through complex building components. FRAME is part of the FRAMEplus toolkit for analysis of windows, doors, walls, roofs and below-grade assemblies. Users draw building components as assemblies of cross-sections. Any interior or exterior environmental condition can be applied. .DXF files and VISION4 files can be imported to speed up data entry. Results are displayed graphically and are used to determine heat transfer, potential for thermal bridging and surface condensation. The FRAME4 simulations (when combined with VISION) are an equal alternative to testing to determine the U-value and solar heat gain coefficient of windows and doors. The U.S. National Fenestration Rating Council and Canadian Standard Association recognize

104

Integrated seat frame and back support  

DOE Patents (OSTI)

An integrated seating device comprises a seat frame having a front end and a rear end. The seat frame has a double wall defining an exterior wall and an interior wall. The rear end of the seat frame has a slot cut therethrough both the exterior wall and the interior wall. The front end of the seat frame has a slot cut through just the interior wall thereof. A back support comprising a generally L shape has a horizontal member, and a generally vertical member which is substantially perpendicular to the horizontal member. The horizontal member is sized to be threaded through the rear slot and is fitted into the front slot. Welded slat means secures the back support to the seat frame to result in an integrated seating device.

Martin, Leo (Coconut Grove, FL)

1999-01-01T23:59:59.000Z

105

Chaotic inflation in Jordan frame supergravity  

E-Print Network (OSTI)

We consider the inflationary scenario with non-minimal coupling in 4D Jordan frame supergravity. We find that there occurs a tachyonic instability along the direction of the accompanying non-inflaton field in generic Jordan frame supergravity models. We propose a higher order correction to the Jordan frame function for solving the tachyonic mass problem and show that the necessary correction can be naturally generated by the heavy thresholds without spoiling the slow-roll conditions. We discuss the implication of the result on the Higgs inflation in NMSSM.

Hyun Min Lee

2010-05-16T23:59:59.000Z

106

Self-aligning biaxial load frame  

DOE Patents (OSTI)

An self-aligning biaxial loading apparatus for use in testing the strength of specimens while maintaining a constant specimen centroid during the loading operation. The self-aligning biaxial loading apparatus consists of a load frame and two load assemblies for imparting two independent perpendicular forces upon a test specimen. The constant test specimen centroid is maintained by providing elements for linear motion of the load frame relative to a fixed cross head, and by alignment and linear motion elements of one load assembly relative to the load frame. 3 figures.

Ward, M.B.; Epstein, J.S.; Lloyd, W.R.

1994-01-18T23:59:59.000Z

107

Summary Report for Bureau of Fisheries Stream Habitat Surveys : Clearwater, Salmon, Weiser, and Payette River Basins, 1934-1942, Final Report.  

DOE Green Energy (OSTI)

This document contains summary reports of stream habitat surveys, conducted in Idaho, by the Bureau of Fisheries (BOF, now National Marine Fisheries Service) from 1938-1942.. These surveys were part of a larger project to survey streams in the Columbia River basin that provided, or had provided, spawning and rearing habitat for salmon and steelhead (Rich, 1948). The purpose of the survey was, as described by Rich, 'to determine the present condition of the various tributaries with respect to their availability and usefulness for the migration, breeding, and rearing of migratory fishes'. The Idaho portion of the survey consisted of extensive surveys of the Clearwater, Salmon, Weiser, and Payette River Subbasins. Current estimates of the loss of anadromous fish habitat in the Columbia River Basin are based on a series of reports published from 1949-1952 by the U.S. Fish and Wildlife Service. The reports were brief, qualitative accounts of over 5000 miles of stream surveys conducted by the BOF from 1934-1946 (Bryant, 1949; Bryant and Parkhurst, 1950; Parkhurst, 1950a-c; Parkhurst et al., 1950). Despite their brevity, these BOF reports have formed the basis for estimating fish habitat losses and conditions in the Columbia River Basin (Fulton, 1968, 1970; Thompson, 1976; NPPC, 1986). Recently, the field notebooks from the BOF surveys were discovered. The data is now archived and stored in the Forest Science DataBank at Oregon State University (Stafford et al., 1984; 1988). These records are the earliest and most comprehensive documentation available of the condition and extent of anadromous fish habitat before hydropower development in the Columbia River Basin. They provide the baseline data for quantifying changes and setting a benchmark for future restoration of anadromous fish habitat throughout the Basin. The summaries contained in this book are exact replicates of the originals. Due to discrepancies between the field data and the summaries, the database should be used to assess pool and substrate conditions. This data is available from the Bonneville Power Administration. The Bureau of Fisheries survey is unique because it is the only long-term data set that quantifies fish habitat in a manner that is replicable over time; no other similar work is known to exist. Other surveys, such as Thompson and Haas (1960), inventoried extensive areas in a manner that was mostly qualitative, subjectively estimating physical characteristics like bank cover and stream shading. Spawning, rearing, and resting habitat were not systematically quantified to allow comparisons over time. Knowledge of the past and present quantity and quality of anadromous fish habitat in the Columbia River Basin is essential to any effort to enhance fish populations. Habitat condition is a key element in monitoring and evaluating progress towards the doubling goal. Integration of this information into the Columbia River Fish and Wildlife Plan can provide the baseline information to greatly enhance understanding of past, present, and future habitat conditions in the basin to provide for improved management decisions.

McIntosh, Bruce A.; Clark, Sharon E.; Sedell, James R.

1995-01-01T23:59:59.000Z

108

Quantization and erasures in frame representations  

E-Print Network (OSTI)

Frame representations, which correspond to overcomplete generalizations to basis expansions, are often used in signal processing to provide robustness to errors. In this thesis robustness is provided through the use of ...

Boufounos, Petros T., 1977-

2006-01-01T23:59:59.000Z

109

Quantization Noise Shaping on Arbitrary Frame Expansions  

E-Print Network (OSTI)

Quantization noise shaping is commonly used in oversampled A/D and D/A converters with uniform sampling. This paper considers quantization noise shaping for arbitrary finite frame expansions based on generalizing the view ...

Boufounos, Petros T.

110

Frame Optimization of a Hybrid Spyder Roadster  

Science Conference Proceedings (OSTI)

But, the addition of electric components (e-motor, lithium-ion battery…) ... project is to reduce the frame weight in an effort to limit the total weight of the vehicle.

111

High Performance Commercial Fenestration Framing Systems  

SciTech Connect

A major objective of the U.S. Department of Energy is to have a zero energy commercial building by the year 2025. Windows have a major influence on the energy performance of the building envelope as they control over 55% of building energy load, and represent one important area where technologies can be developed to save energy. Aluminum framing systems are used in over 80% of commercial fenestration products (i.e. windows, curtain walls, store fronts, etc.). Aluminum framing systems are often required in commercial buildings because of their inherent good structural properties and long service life, which is required from commercial and architectural frames. At the same time, they are lightweight and durable, requiring very little maintenance, and offer design flexibility. An additional benefit of aluminum framing systems is their relatively low cost and easy manufacturability. Aluminum, being an easily recyclable material, also offers sustainable features. However, from energy efficiency point of view, aluminum frames have lower thermal performance due to the very high thermal conductivity of aluminum. Fenestration systems constructed of aluminum alloys therefore have lower performance in terms of being effective barrier to energy transfer (heat loss or gain). Despite the lower energy performance, aluminum is the choice material for commercial framing systems and dominates the commercial/architectural fenestration market because of the reasons mentioned above. In addition, there is no other cost effective and energy efficient replacement material available to take place of aluminum in the commercial/architectural market. Hence it is imperative to improve the performance of aluminum framing system to improve the energy performance of commercial fenestration system and in turn reduce the energy consumption of commercial building and achieve zero energy building by 2025. The objective of this project was to develop high performance, energy efficient commercial fenestration framing systems, by investigating new technologies that would improve the thermal performance of aluminum frames, while maintaining their structural and life-cycle performance. The project targeted an improvement of over 30% (whole window performance) over conventional commercial framing technology by improving the performance of commercial framing systems.

Mike Manteghi; Sneh Kumar; Joshua Early; Bhaskar Adusumalli

2010-01-31T23:59:59.000Z

112

Frame moduli of unconsolidated sands and sandstones  

SciTech Connect

In this study, the authors investigate the elastic moduli of the empty grain framework (the frame moduli) in unconsolidated sands and consolidated sandstones. The work was done to improve the interpretation of seismic amplitude anomalies and amplitude variations with offset (AVO) associated with hydrocarbon reservoirs. They developed a laboratory apparatus to measure the frame Poisson's ratio and Young's modulus of unconsolidated sands at seismic frequencies (0.2 to 155 Hz) in samples approximately 11 cm long. They used ultrasonic pulse velocity measurements to measure the frame moduli of consolidated sandstones. They found that the correlation coefficient between the frame Poisson's ratio [sigma][sub A] and the mineral Poisson's ratio [sigma][sub M] is 0.84 in consolidated sandstones and only 0.28 in unconsolidated sands. The range of [sigma][sub A] values in unconsolidated sands is 0.115 to 0.237 (mean = 0.187, standard deviation = 0.030), and [sigma][sub A] cannot be estimated without core or log analyses. Frame moduli analyses of core samples can be used to calibrate the interpretation of seismic amplitude anomalies and AVO effects. For use in areas without core or log analyses, the authors developed an empirical relation that can be used to estimate [sigma][sub A] in unconsolidated sands and sandstones from [sigma][sub M] and the frame P-wave modulus.

Spencer, J.W. Jr.; Cates, M.E.; Thompson, D.D. (Chevron Petroleum Technology Co., La Habra, CA (United States))

1994-09-01T23:59:59.000Z

113

State heating oil and propane program: Final report. Survey of No.2 heating oil and propane prices at the retail level, October 1997 through March 1998  

SciTech Connect

The Energy Efficiency Division of the Vermont Department of Public Service (DPS) monitored the price and inventory of residential heating oil and propane during the 1997--98 heating season under a grant from the US Department of Energy`s Energy Information Administration (EIA). DPS staff collected data biweekly between October 5, 1997 and March 16, 1998 on the retail price of {number_sign}2 home heating oil and propane by telephone survey. Propane price quoted was based on the rate for a residential home heating customer using 1,000+ per year. The survey included a sample of fuel dealers selected by the EIA, plus additional dealers and fuels selected by the DPS. The EIA weighted, analyzed, and reported the data collected from their sample.

1998-11-01T23:59:59.000Z

114

Summary Report for Bureau of Fisheries Stream Habitat Surveys : Umatilla, Tucannon, Asotin, and Grande Ronde River Basins, 1934-1942, Final Report.  

DOE Green Energy (OSTI)

This document contains summary reports of stream habitat surveys, conducted in the Umatilla and Grande Ronde River basins, by the Bureau of Fisheries (BOF, now National Marine Fisheries Service) from 1938-1942. These surveys were part of a larger project to survey streams in the Columbia River basin that provided, or had provided, spawning and rearing habitat for salmon and steelhead (Rich, 1948). The purpose of the survey was, as described by Rich, 'to determine the present condition of the various tributaries with respect to their availability and usefulness for the migration, breeding, and rearing of migratory fishes'. Current estimates of the loss of anadromous fish habitat in the Columbia River Basin are based on a series of reports published from 1949-1952 by the U.S. Fish and Wildlife Service. The reports were brief, qualitative accounts of over 5000 miles of stream surveys conducted by the BOF from 1934-1946 (Bryant, 1949; Bryant and Parkhurst, 1950; Parkhurst, 1950a-c; Parkhurst et al 1950). Despite their brevity, these BOF reports have formed the basis for estimating fish habitat losses and conditions in the Columbia River Basin (Fulton, 1968, 1970; Thompson, 1976; NPPC, 1986). Recently, the field notebooks from the BOF surveys were discovered. The data is now archived and stored in the Forest Science DataBank at Oregon State University (Stafford et al., 1984; 1988). These records are the earliest and most comprehensive documentation available of the condition and extent of anadromous fish habitat before hydropower development in the Columbia River Basin. They provide the baseline data for quantifying changes and setting a benchmark for future restoration of anadromous fish habitat throughout the Basin. The summaries contained in this book are exact replicates of the originals. Due to discrepancies between the field data and the summaries, the database should be used to assess pool and substrate conditions. This data is available from the Bonneville Power Administration. The Bureau of Fisheries survey is unique because it is the only long-term data set that quantifies fish habitat in a manner that is replicable over time; no other similar work is known to exist. Other surveys, such as Thompson and Haas (1960) inventoried extensive areas in a manner that was mostly qualitative, subjectively estimating physical characteristics like bank cover and stream shading. Spawning, rearing, and resting habitat were not systematically quantified to allow comparisons over time. Knowledge of the past and present quantity and quality of anadromous fish habitat in the Columbia River Basin is essential to any effort to enhance fish populations. Habitat condition is a key element in monitoring and evaluating progress towards the doubling goal. Integration of this information into the Columbia River Fish and Wildlife Plan can provide the baseline information to greatly enhance understanding of past, present, and future habitat conditions in the basin to provide for improved management decisions.

McIntosh, Bruce A.; Clark, Sharon E.; Sedell, James R.

1995-01-01T23:59:59.000Z

115

Surveys of distribution and abundance of the Hawaiian hawk within the vicinity of proposed geothermal project subzones in the District of Puna, Hawaii. Final report  

DOE Green Energy (OSTI)

In 1993, the US Fish and Wildlife Service (USFWS) entered an interagency agreement with the Department of Energy (DOE) to conduct specific biological surveys to identify potential impacts of proposed geothermal development on the biota of the east rift zone of Kilauea volcano in the Puna district on the island of Hawaii. This report presents data on the distribution, habitat use, and density of the Hawaiian hawk or `Io (Buteo solitarius). Data were collected by the USFWS to assess the potential impacts of geothermal development on `Io populations on the island of Hawaii. These impacts include degradation of potential nesting habitat and increased disturbance due to construction and operation activities. Data from these surveys were analyzed as part of an island wide population assessment conducted by the Western Foundation of Vertebrate Zoology at the request of the USFWS.

Reynolds, M.; Ritchotte, G.; Viggiano, A.; Dwyer, J.; Nielsen, B.; Jacobi, J.D. [Fish and Wildlife Service, Hawaii National Park, HI (United States). Hawaii Research Station

1994-08-01T23:59:59.000Z

116

Modeling Laser Wakefield Accelerators in a Lorentz Boosted Frame  

NLE Websites -- All DOE Office Websites (Extended Search)

Laser Wakefield Accelerators in a Lorentz Boosted Frame Modeling Laser Wakefield Accelerators in a Lorentz Boosted Frame VayBoost.gif An image showing the "boosted frame," in which...

117

SEISMIC MEASUREMENTS BY THE U.S. GEOLOGICAL SURVEY DURING THE PRE-GNOME HIGH-EXPLOSIVES TESTS NEAR CARLSBAD, NEW MEXICO. Final Report  

SciTech Connect

The U. S. Geological Survey monitored three highexplosive test shots at the Gnome site during the PreGnome experiments and monitored routine blasting in the potash mine of the Duval Sulphur and Potash Company. The motion in the potash mines near Carlsbad from a shot of 9 kt of TNT at the Gnome site, 46,000 feet from the nearest potash mine, is given. These particle velocities and accelerations are less than those recorded at a distance of 90 feet from a routine 75-pound dynamite blast in a potash mine. (auth)

Byerly, P.E.; Stewart, S.W.; Roller, J.C.

1960-04-01T23:59:59.000Z

118

Conformally flat spacetimes and Weyl frames  

E-Print Network (OSTI)

We discuss the concepts of Weyl and Riemann frames in the context of metric theories of gravity and state the fact that they are completely equivalent as far as geodesic motion is concerned. We apply this result to conformally flat spacetimes and show that a new picture arises when a Riemannian spacetime is taken by means of geometrical gauge transformations into a Minkowskian flat spacetime. We find out that in the Weyl frame gravity is described by a scalar field. We give some examples of how conformally flat spacetime configurations look when viewed from the standpoint of a Weyl frame. We show that in the non-relativistic and weak field regime the Weyl scalar field may be identified with the Newtonian gravitational potential. We suggest an equation for the scalar field by varying the Einstein-Hilbert action restricted to the class of conformally-flat spacetimes. We revisit Einstein and Fokker's interpretation of Nordstr\\"om scalar gravity theory and draw an analogy between this approach and the Weyl gauge formalism. We briefly take a look at two-dimensional gravity as viewed in the Weyl frame and address the question of quantizing a conformally flat spacetime by going to the Weyl frame.

C. Romero; J. B. Fonseca-Neto; M. L. Pucheu

2011-01-27T23:59:59.000Z

119

Molecular-Frame Angular Distributions of Resonant Auger Electrons  

NLE Websites -- All DOE Office Websites (Extended Search)

new insights in the dynamic world of molecular phenomena. The molecular frame is the natural reference frame for the study of molecules and their interaction with electromagnetic...

120

A survey of endangered waterbirds on Maui and Oahu and assessment of potential impacts to waterbirds from the proposed Hawaii Geothermal Project transmission corridor. Final report  

DOE Green Energy (OSTI)

A survey of endangered waterbirds on Maui and Oahu was conducted during August and September 1993 to identify potential waterbird habitats within the general area of the proposed Hawaii Geothermal Project transmission corridor and to assess the potential impacts to endangered waterbird of installing and operating a high voltage transmission line from the Island of Hawaii to the islands of Oahu and Maui. Annual waterbird survey information and other literature containing information on specific wetland sites were summarized. Literature describing impacts of overhead transmission lines on birds was used to evaluate potential impacts of the proposed project on endangered waterbirds, resident wading birds, and migratory shorebirds and waterfowl. On Oahu, five wetland habitats supporting endangered Hawaiian waterbirds were identified within 2.5 miles of the proposed transmission line corridor. On Maui, three wetland habitats supporting endangered Hawaiian waterbirds were identified within the general area of the proposed transmission line corridor. Several of the wetlands identified on Oahu and Maui also supported resident wading birds and migratory shorebirds and waterfowl. Endangered waterbirds, resident wading birds, and migratory birds may collide with the proposed transmission lines wires. The frequency and numbers of bird collisions is expected to be greater on Oahu than on Maui because more wetland habitat exists and greater numbers of birds occur in the project area on Oahu. In addition, the endangered Hawaiian goose and the endangered Hawaiian petrel may be impacted by the proposed segment of the Hawaii Geothermal Project transmission line on Maui.

Evans, K.; Woodside, D.; Bruegmann, M. [Fish and Wildlife Service, Honolulu, HI (United States). Pacific Islands Office

1994-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Surveys of the distribution of seabirds found in the vicinity of proposed geothermal project subzones in the District of Puna, Hawaii. Final report  

DOE Green Energy (OSTI)

In 1993, the US Fish and Wildlife Service (USFWS) entered into an interagency agreement with the Department of Energy (DOE) to conduct specific biological surveys to identify potential impacts of the proposed geothermal development on the natural resources of the East Rift Zone. This report presents information from published literature information and new field data on seabird populations on the island of Hawaii. These data are analyzed with regard to potential impacts of geothermal development on seabird populations in this area. Fifteen species of seabirds, waterbirds, and shorebirds are documented or suspected of being found using habitats within or immediately adjacent to the three geothermal subzones located in the Puna district on the island of Hawai`i. Of these species, two are on the federal Endangered Species List, three are on the State of Hawaii Endangered Species List, and all 15 are protected by the federal Migratory Bird Act.

Reynolds, M.; Ritchotte, G.; Viggiano, A.; Dwyer, J.; Nielsen, B.; Jacobi, J.D. [Fish and Wildlife Service, Hawaii National Park, HI (United States). Hawaii Research Station

1994-08-01T23:59:59.000Z

122

Super Gabor frames on discrete periodic sets  

Science Conference Proceedings (OSTI)

Due to its potential applications in multiplexing techniques such as time division multiple access and frequency division multiple access, superframe has interested some mathematicians and engineering specialists. In this paper, we investigate super ... Keywords: 42C40, Discrete Zak transform, Discrete periodic sets, Gabor dual, Super Gabor frame, Superframe

Yun-Zhang Li; Qiao-Fang Lian

2013-05-01T23:59:59.000Z

123

Analysing sequences of TV-frames  

Science Conference Proceedings (OSTI)

A system is being implemented to analyse sequences of TV-frames from real world scenes like a street intersection with cars. A monocular black/white TV-camera will record - without changing its position or viewing direction - a scene in realtime on an ...

H.-H. Nagel

1977-08-01T23:59:59.000Z

124

Jordan Frame Supergravity and Inflation in NMSSM  

E-Print Network (OSTI)

We present a complete explicit N=1, d=4 supergravity action in an arbitrary Jordan frame with non-minimal scalar-curvature coupling of the form $\\Phi(z, \\bar z)\\, R$. The action is derived by suitably gauge-fixing the superconformal action. The theory has a modified Kaehler geometry, and it exhibits a significant dependence on the frame function $\\Phi (z, \\bar z)$ and its derivatives over scalars, in the bosonic as well as in the fermionic part of the action. Under certain simple conditions, the scalar kinetic terms in the Jordan frame have a canonical form. We consider an embedding of the Next-to-Minimal Supersymmetric Standard Model (NMSSM) gauge theory into supergravity, clarifying the Higgs inflation model recently proposed by Einhorn and Jones. We find that the conditions for canonical kinetic terms are satisfied for the NMSSM scalars in the Jordan frame, which leads to a simple action. However, we find that the gauge singlet field experiences a strong tachyonic instability during inflation in this model. Thus, a modification of the model is required to support the Higgs-type inflation.

Sergio Ferrara; Renata Kallosh; Andrei Linde; Alessio Marrani; Antoine Van Proeyen

2010-04-05T23:59:59.000Z

125

STATE OF CALIFORNIA FRAMING STAGE CHECKLIST  

E-Print Network (OSTI)

on the building plans with diagrams and/or specific design drawings indicating the R-value of insulation COMMISSION INSTALLATION CERTIFICATE CF-6R-ENV-21-HERS Quality Insulation Installation (QII) - Framing Stage Checklist (Page 1 of 2) Site Address: Enforcement Agency: Permit Number: Quality Insulation Installation

126

Video frame store; An advanced solid state recorder  

SciTech Connect

In many security applications, such as in nuclear facilities, solid state recorders (SSR) have been used to instantly record and play back video images of a scene when an alarm occurs in that scene. Unlike video cassette recorders (VCR) which take a second or two to start, SSRs can respond to a command from a host computer in less than 1/30th of a second. Therefore they can be a very useful tool for video alarm assessment. There are, however, four major drawbacks with current commercial SSRs. One is high cost: a typical commercial SSR unit that can store up to 128 frames of video image costs about $70,000. Another drawback is the inability to record asynchronous video. A third problem is inflexibility of system configuration; e.g., increasing memory for image storage in an SSR can only be done by purchasing an additional unit or replacing it with another one with more memory. The final drawback is the inability to handshake with a host computer to guarantee the integrity of its response to the host's commands. The Video Frame Store (CFS) is an advanced solid state recorder that provides an effective resolution to the above problems. A VFS unit that stores 128 video frames costs less than half of a typical SSR. In addition to many basic features of a typical SSR, the VFS also provides a number of advanced features. The hardware and software implementation as well as the advanced features are discussed in detail in this paper.

Thai, T.Q.; Walker, J.E. (Sandia National Labs., Albuquerque, NM (United States))

1991-01-01T23:59:59.000Z

127

Survey mirrors and lenses and their required surface accuracy. Volume 1. Technical report. Final report for September 15, 1978-December 1, 1979  

SciTech Connect

An investigation of the optical performance of a variety of concentrating solar collectors is reported. The study addresses two important issues: the accuracy of reflective or refractive surfaces required to achieve specified performance goals, and the effect of environmental exposure on the performance concentrators. To assess the importance of surface accuracy on optical performance, 11 tracking and nontracking concentrator designs were selected for detailed evaluation. Mathematical models were developed for each design and incorporated into a Monte Carlo ray trace computer program to carry out detailed calculations. Results for the 11 concentrators are presented in graphic form. The models and computer program are provided along with a user's manual. A survey data base was established on the effect of environmental exposure on the optical degradation of mirrors and lenses. Information on environmental and maintenance effects was found to be insufficient to permit specific recommendations for operating and maintenance procedures, but the available information is compiled and reported and does contain procedures that other workers have found useful.

Not Available

1980-01-01T23:59:59.000Z

128

FRAME DEPENDENCE OF THE ELECTRIC FIELD SPECTRUM OF SOLAR WIND TURBULENCE  

Science Conference Proceedings (OSTI)

We present the first survey of electric field data using the ARTEMIS spacecraft in the solar wind to study inertial range turbulence. It was found that the average perpendicular spectral index of the electric field depends on the frame of measurement. In the spacecraft frame it is -5/3, which matches the magnetic field due to the large solar wind speed in Lorentz transformation. In the mean solar wind frame, the electric field is primarily due to the perpendicular velocity fluctuations and has a spectral index slightly shallower than -3/2, which is close to the scaling of the velocity. These results are an independent confirmation of the difference in scaling between the velocity and magnetic field, which is not currently well understood. The spectral index of the compressive fluctuations was also measured and found to be close to -5/3, suggesting that they are not only passive to the velocity but may also interact nonlinearly with the magnetic field.

Chen, C. H. K.; Bale, S. D.; Salem, C.; Mozer, F. S., E-mail: chen@ssl.berkeley.edu [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States)

2011-08-20T23:59:59.000Z

129

Nucleic Acid Standards - Standard Ref. Frame  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard Reference Standard Reference Standard Reference Frame Supplemental Information Ideal Geometries X-PLOR Parameters Valence Geometries RNA Ontology Consortium mmCIF Resources PDBML Resources A Standard Reference Frame for the Description of Nucleic Acid Base-pair Geometry A common point of reference is needed to describe the three-dimensional arrangements of bases and base pairs in nucleic acid structures. [1]. For example, parts of a structure, which appear "normal" according to one computational scheme, may be highly unusual according to another and vice versa. It is thus difficult to carry out comprehensive comparisons of nucleic acid structures and to pinpoint unique conformational features in individual structures. In order to resolve these issues, a group of

130

Gravitational wave astronomy: the definitive test for the "Einstein frame versus Jordan frame" controversy  

E-Print Network (OSTI)

The potential realization of a gravitational wave (GW) astronomy in next years is a great challenge for the scientific community. By giving a significant amount of new information, GWs will be a cornerstone for a better understanding of the universe and of the gravitational physics. In this paper the author shows that the GW astronomy will permit to solve a captivating issue of gravitation as it will be the definitive test for the famous "Einstein frame versus Jordan frame" controversy. In fact, we show that the motion of the test masses, i.e. the beam splitter and the mirror in the case of an interferometer, which is due to the scalar component of a GW, is different in the two frames. Thus, if a consistent GW astronomy will be realized, an eventual detection of signals of scalar GWs will permit to discriminate among the two frames. In this way, a direct evidence from observations will solve in an ultimate way the famous and long history of the "Einstein frame versus Jordan frame" controversy.

Christian Corda

2010-10-11T23:59:59.000Z

131

Comparison of Frames: Jordan vs Einstein Frame for a Non-minimal Dark Energy Model  

E-Print Network (OSTI)

We construct a dark energy model where a scalar field non-minimally coupled to gravity plays the role of the dark component. We compare cosmological consequences of this non-minimal coupling of the scalar field and gravity in the spirit of the dark energy paradigm in Jordan and Einstein frames. Some important issues such as phantom divide line crossing, existence of the bouncing solutions and the stability of the solutions are compared in these two frames. We show that while a non-minimally coupled scalar field in the Jordan frame is a suitable dark energy component with capability to realize phantom divide line crossing, its conformal transformation in the Einstein frame has not this capability. The conformal transformation from Jordan frame to Einstein frame transforms the equation of state parameter of the dark energy component to its minimal form with a redefined scalar field and in this case it is impossible to realize a phantom phase with possible crossing of the phantom divide line.

Kourosh Nozari; S. Davood Sadatian

2009-05-03T23:59:59.000Z

132

Nucleic Acid Standards - Standard Ref. Frame  

NLE Websites -- All DOE Office Websites (Extended Search)

A Standard Reference Frame for the Description A Standard Reference Frame for the Description of Nucleic Acid Base-pair Geometry Supplementary Material The report is available at Journal of Molecular Biology (2001) 313: 229 - 237 and The Nucleic Acid Cartesian coordinates for A, C, G, T, and U in the optimized reference frame Adenine, Cytosine, Guanine, Thymine, Uracil Standard chemical structures taken from Clowney et al. (1996), J. Am. Chem. Soc., 118, 509-518). These data do not include C1' atoms, which are placed here in the least-squares plane of the base atoms, with the purine C1'-N9 bond length and C1'-N9-C4 valence angle set respectively to 1.46 Å and 126.5° and the pyrimidine C1'-N1 bond and C1-N1-C2 angle to 1.47 Å and 118.1°. These distances and angles are based on the average glycosyl

133

Revised FINAL–REPORT NO. 2: INDEPENDENT CONFIRMATORY SURVEY SUMMARY AND RESULTS FOR THE ENRICO FERMI ATOMIC POWER PLANT, UNIT 1, NEWPORT, MICHIGAN (DOCKET NO. 50 16; RFTA 10-004) 2018-SR-02-1  

Science Conference Proceedings (OSTI)

The Enrico Fermi Atomic Power Plant, Unit 1 (Fermi 1) was a fast breeder reactor design that was cooled by sodium and operated at essentially atmospheric pressure. On May 10, 1963, the Atomic Energy Commission (AEC) granted an operating license, DPR-9, to the Power Reactor Development Company (PRDC), a consortium specifically formed to own and operate a nuclear reactor at the Fermi 1 site. The reactor was designed for a maximum capability of 430 megawatts (MW); however, the maximum reactor power with the first core loading (Core A) was 200 MW. The primary system was filled with sodium in December 1960 and criticality was achieved in August 1963. The reactor was tested at low power during the first couple years of operation. Power ascension testing above 1 MW commenced in December 1965 immediately following the receipt of a high-power operating license. In October 1966 during power ascension, zirconium plates at the bottom of the reactor vessel became loose and blocked sodium coolant flow to some fuel subassemblies. Two subassemblies started to melt and the reactor was manually shut down. No abnormal releases to the environment occurred. Forty-two months later after the cause had been determined, cleanup completed, and the fuel replaced, Fermi 1 was restarted. However, in November 1972, PRDC made the decision to decommission Fermi 1 as the core was approaching its burn-up limit. The fuel and blanket subassemblies were shipped off-site in 1973. Following that, the secondary sodium system was drained and sent off-site. The radioactive primary sodium was stored on-site in storage tanks and 55 gallon (gal) drums until it was shipped off-site in 1984. The initial decommissioning of Fermi 1 was completed in 1975. Effective January 23, 1976, DPR-9 was transferred to the Detroit Edison Company (DTE) as a 'possession only' license (DTE 2010a). This report details the confirmatory activities performed during the second Oak Ridge Institute for Science and Education (ORISE) site visit to Fermi 1 in November 2010. The survey was strategically planned during a Unit 2 (Fermi 2) outage to take advantage of decreased radiation levels that were observed and attributed to Fermi 2 from the operating unit during the first site visit. However, during the second visit there were elevated radiation levels observed and attributed to the partially dismantled Fermi 1 reactor vessel and a waste storage box located on the 3rd floor of the Fermi 1 Turbine Building. Confirmatory surveys (unshielded) performed directly in the line of sight of these areas were affected. The objective of the confirmatory survey was to verify that the final radiological conditions were accurately and adequately described in Final Status Survey (FSS) documentation, relative to the established release criteria. This objective was achieved by performing document reviews, as well as independent measurements and sampling. Specifically, documentation of the planning, implementation, and results of the FSS were evaluated; side-by-side FSS measurement and source comparisons were performed; site areas were evaluated relative to appropriate FSS classification; and areas were assessed for residual, undocumented contamination.

Erika Bailey

2011-10-27T23:59:59.000Z

134

Automatic Extraction of Subcategorization Frames for Czech  

E-Print Network (OSTI)

We present some novel machine learning techniques for the identification of subcategorization information for verbs in Czech. We compare three different statistical techniques applied to this problem. We show how the learning algorithm can be used to discover previously unknown subcategorization frames from the Czech Prague 1)ependency Treebank. The algorithm can then be used to label dependents of a verb in the Czech treebank as either arguments or adjuncts. Using our techniques, we are able to achieve 88% precision on unseen parsed text.

Anoop Sarkar; Daniel Zeman

2000-01-01T23:59:59.000Z

135

Geodesic Reduction via Frame Bundle Geometry  

E-Print Network (OSTI)

A manifold with an arbitrary affine connection is considered and the geodesic spray associated with the connection is studied in the presence of a Lie group action. In particular, results are obtained that provide insight into the structure of the reduced dynamics associated with the given invariant affine connection. The geometry of the frame bundle of the given manifold is used to provide an intrinsic description of the geodesic spray. A fundamental relationship between the geodesic spray, the tangent lift and the vertical lift of the symmetric product is obtained, which provides a key to understanding reduction in this formulation.

Bhand, Ajit

2010-01-01T23:59:59.000Z

136

Assessing the impact of frame semantics on textual entailment  

Science Conference Proceedings (OSTI)

In this article, we underpin the intuition that frame semantic information is a useful resource for modelling textual entailment. To this end, we provide a manual frame semantic annotation for the test set used in the second recognizing textual entailment ...

Aljoscha Burchardt; Marco Pennacchiotti; Stefan Thater; Manfred Pinkal

2009-10-01T23:59:59.000Z

137

SolarFrameWorks Co | Open Energy Information  

Open Energy Info (EERE)

Zip 80202 Product This company provides framing and mounting systems to the PV industry. References SolarFrameWorks Co1 LinkedIn Connections CrunchBase Profile No...

138

Survey Expectations  

E-Print Network (OSTI)

of Michigan and is known as the Michigan survey, with many other similar surveys conducted across OECD countries so as to provide up to date information on consumer expectations. Questions on expectations are also sometimes included in panel surveys... be formed, do of course make it possible to assess whether, or how far, such expectations are well-founded by comparing the experiences of individual households with their prior expectations. A key aspect of the Michigan survey, and of many other more recent...

Pesaran, M Hashem; Weale, Martin

2006-03-14T23:59:59.000Z

139

Sitting, standing, and lying in frames: a frame-based approach to posture verbs  

Science Conference Proceedings (OSTI)

Posture verbs which allow for an extended locative use, such as sit, stand and lie, make reference to specific parts of the localized object, to the orientation of prominent object axes and to positional information, which are perceived ... Keywords: French, German, Korean, extended locative use, frame analysis, object schemata, posture verbs

Thomas Gamerschlag; Wiebke Petersen; Liane Ströbel

2011-09-01T23:59:59.000Z

140

Survey Statisticians  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Statisticians Survey Statisticians The U.S.Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the Survey Statistician, who measures the amounts of energy produced and consumed in the United States. Responsibilities: Survey Statisticians perform or participate in one or more of the following important functions: * Design energy surveys by writing questions, creating layouts and testing questions for clarity and accuracy. * Conduct energy surveys to include sending out and tracking survey responses, editing and analyzing data submis- sions and communicating with respondents to verify data.

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Digital Surveying Directional Surveying Specialists | Open Energy  

Open Energy Info (EERE)

Digital Surveying Directional Surveying Specialists Digital Surveying Directional Surveying Specialists Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Digital Surveying Directional Surveying Specialists Author Directional Surveying Specialists Published Publisher Not Provided, 2012 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Digital Surveying Directional Surveying Specialists Citation Directional Surveying Specialists. Digital Surveying Directional Surveying Specialists [Internet]. 2012. [cited 2013/10/08]. Available from: http://www.digitalsurveying.co.za/services/geophysical-borehole-surveying/overview/optical-televiewer/ Retrieved from "http://en.openei.org/w/index.php?title=Digital_Surveying_Directional_Surveying_Specialists&oldid=690244"

142

SCO Survey  

Science Conference Proceedings (OSTI)

Survey on Future of NIST's Standards Information Services. June 5, 2013. *. Bookmark and Share. Contact: Clare Allocca 301-975-4359. ...

2013-06-05T23:59:59.000Z

143

FrameNet, current collaborations and future goals  

Science Conference Proceedings (OSTI)

This paper will focus on recent and near-term future developments at FrameNet (FN) and the interoperability issues they raise. We begin by discussing the current state of the Berkeley FN database including major changes in the data format for the latest ... Keywords: Corpus, Crowdsourcing, Frame semantics, FrameNet, Lexical resource, Lexical semantics interoperability, Lexicon, Semantic role, Thematic role, WordNet

Collin F. Baker

2012-06-01T23:59:59.000Z

144

Neighborhood, City, or Region: Deconstructing Scale in Planning Frames  

E-Print Network (OSTI)

pdf -----. 2004. Transportation 2030 Equity Analysis Report.generation: Transportation 2030 plan for the San Franciscoplanning organization’s 2030 plan (MTC 2005) frames

Lowe, Kate

2011-01-01T23:59:59.000Z

145

Riot or rebellion: media framing and the 1967 Detroit uprising.  

E-Print Network (OSTI)

??Frames make sense of complex issues and events, including identifying who is to blame and who or what is responsible for overcoming the problem. This… (more)

Ulbrich, Casandra E.

2011-01-01T23:59:59.000Z

146

Brans-Dicke wormholes in the Jordan and Einstein frames  

E-Print Network (OSTI)

We examine the possibility of static wormhole solutions in the vacuum Brans-Dicke theory both in the original (Jordan) frame and in the conformally rescaled (Einstein) frame. It turns out that, in the former frame, wormholes exist only in a very narrow interval of the coupling parameter, viz., -3/2frame, wormhole solutions do not exist at all unless energy conditions are violated by hand.

K. K. Nandi; B. Bhattacharjee; S. M. K. Alam; J. Evans

2009-05-31T23:59:59.000Z

147

Brans-Dicke theory: Jordan vs Einstein Frame  

E-Print Network (OSTI)

It is well known that, in contrast to general relativity, there are two conformally related frames, the Jordan frame and the Einstein frame, in which the Brans-Dicke theory, a prototype of generic scalar-tensor theory, can be formulated. There is a long standing debate on the physical equivalence of the formulations in these two different frames. It is shown here that gravitational deflection of light to second order accuracy may observationally distinguish the two versions of the Brans-Dicke theory.

A. Bhadra; K. Sarkar; D. P. Datta; K. K. Nandi

2006-05-19T23:59:59.000Z

148

Survey Consumption  

Gasoline and Diesel Fuel Update (EIA)

fsidentoi fsidentoi Survey Consumption and 'Expenditures, April 1981 March 1982 Energy Information Administration Wasningtoa D '" N """"*"""*"Nlwr. . *'.;***** -. Mik>. I This publication is available from ihe your COr : 20585 Residential Energy Consumption Survey: Consum ption and Expendi tures, April 1981 Through March 1982 Part 2: Regional Data Prepared by: Bruce Egan This report was prepared by the Energy Information Administra tion, the independent statistical

149

Gravity Load Collapse of Building Frames during Earthquakes  

E-Print Network (OSTI)

Gravity Load Collapse of Building Frames during Earthquakes J. P. Moehle, K. J. Elwood, H. Sezen to frames designed primarily for gravity loads. Columns generally were not designed to have strengths capacity of the column. As the axial capacity diminishes, the gravity loads carried by the column must

Sezen, Halil

150

Blast response comparison of multiple steel frame connections  

Science Conference Proceedings (OSTI)

When a structural steel frame is subjected to blast, the beam-to-column connections, which are responsible for load transfer between different members within the frame, play a major role in structural response. This paper presents results of a comparative ... Keywords: Blast loads, Connections, Displacement, Explosions, Finite element method, Stress

Girum S. Urgessa; Tomasz Arciszewski

2011-07-01T23:59:59.000Z

151

Framing the question: detecting and filling spatial-temporal windows  

Science Conference Proceedings (OSTI)

We propose a new mechanism, which we term frames, for data-dependent windows. In contrast to traditional timestamp-based windows, frames represent just the boundary of a window and can be filled with data from secondary streams or historical data. ... Keywords: data-stream management, spatial-temporal windows

James Whiteneck; Kristin Tufte; Amit Bhat; David Maier; Rafael J. Fernández-Moctezuma

2010-11-01T23:59:59.000Z

152

THE UNIVERSAL VASSILIEV-KONTSEVICH INVARIANT FOR FRAMED ORIENTED LINKS  

E-Print Network (OSTI)

Abstract. We give a generalization of the Reshetikhin-Turaev functor for tangles to get a combinatorial formula for the Kontsevich integral for framed oriented links. The uniqueness of the universal Vassiliev-Kontsevich invariant of framed oriented links is established. As a corollary one gets the rationality of Kontsevich integral.

Le Tu; Quoc Thang; Jun Murakami

1994-01-01T23:59:59.000Z

153

Quality assessment of GPS reprocessed terrestrial reference frame  

Science Conference Proceedings (OSTI)

The International GNSS Service (IGS) contributes to the construction of the International Terrestrial Reference Frame (ITRF) by submitting time series of station positions and Earth Rotation Parameters (ERP). For the first time, its submission to the ... Keywords: GNSS, Geocenter motion, Loading, Systematic errors, Terrestrial reference frames

Xavier Collilieux; Laurent Métivier; Zuheir Altamimi; Tonie Dam; Jim Ray

2011-07-01T23:59:59.000Z

154

Climate Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations Employee Operations Employee Climate Survey March 2009 Acknowledgements The Berkeley Lab Survey Team consisted of the following: Jim Krupnick, Sponsor Vera Potapenko, Project Lead Karen Ramorino, Project Manager Chris Paquette, MOR Associates Alexis Bywater, MOR Associates MOR Associates, an external consulting firm, acted as project manager for this effort, analyzing the data and preparing this report. MOR Associates specializes in continuous improve- ment, strategic thinking and leadership development. MOR Associates has conducted a number of large-scale surveys for organizations in higher education, including MIT, Stanford, the University of Chicago, and others. MOR Associates, Inc. 462 Main Street, Suite 300 Watertown, MA 02472 tel: 617.924.4501

155

Molecular-Frame Angular Distributions of Resonant Auger Electrons  

NLE Websites -- All DOE Office Websites (Extended Search)

Molecular-Frame Angular Molecular-Frame Angular Distributions of Resonant Auger Electrons Molecular-Frame Angular Distributions of Resonant Auger Electrons Print Wednesday, 27 May 2009 00:00 Molecular-frame electron angular distribution (MFAD) measurements provide access to an unprecedented level of detailed information about phenomena involving quantum coherence, such as phases of photoelectron waves, symmetry breaking in molecular dissociation, core-hole localization in molecules, and molecular double-slit interference, all of which are hidden in conventional gas-phase electron spectroscopy, owing to the random orientation of the molecules. While most MFAD studies to date have focused on photoelectrons, an international team of scientists from Western Michigan University, the ALS, and Tohoku University in Japan has successfully used a novel approach to determine for the first time the molecular-frame angular distributions of resonantly excited Auger electrons in carbon monoxide.

156

VLBI surveys  

E-Print Network (OSTI)

Systematic surveys of astronomical objects often lead to discoveries, but always provide invaluable information for statistical studies of well-defined samples. They also promote follow-up investigations of individual objects or classes. Surveys using a yet unexplored observing wavelength, a novel technique or a new instrument are of special importance. Significantly improved observing parameters (e.g. sensitivity, angular resolution, monitoring capability) provide new insight into the morphological and physical properties of the objects studied. I give a brief overview of the important Very Long Baseline Interferometry (VLBI) imaging surveys conducted in the past. A list of surveys guides us through the developments up until the present days. I also attempt to show directions for the near future.

S. Frey

2006-11-08T23:59:59.000Z

157

Developing Low-Conductance Window Frames: Capabilities and Limitations of  

NLE Websites -- All DOE Office Websites (Extended Search)

Developing Low-Conductance Window Frames: Capabilities and Limitations of Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools Title Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools Publication Type Journal Article LBNL Report Number LBNL-1022E Year of Publication 2008 Authors Gustavsen, Arlid, Dariush K. Arasteh, Bjørn Petter Jelle, Dragan C. Curcija, and Christian Kohler Journal Journal of Building Physics Volume 32 Pagination 131-153 Call Number LBNL-1022E Abstract While window frames typically represent 20-30% of the overall window area, their impact on the total window heat transfer rates may be much larger. This effect is even greater in low-conductance (highly insulating) windows which incorporate very low conductance glazings. Developing low-conductance window frames requires accurate simulation tools for product research and development. Based on a literature review and an evaluation of current methods of modeling heat transfer through window frames, we conclude that current procedures specified in ISO standards are not sufficiently adequate for accurately evaluating heat transfer through the low-conductance frames.

158

General reference frames and their associated space manifolds  

E-Print Network (OSTI)

We propose a formal definition of a general reference frame in a general spacetime, as an equivalence class of charts. This formal definition corresponds with the notion of a reference frame as being a (fictitious) deformable body, but we assume, moreover, that the time coordinate is fixed. This is necessary for quantum mechanics, because the Hamiltonian operator depends on the choice of the time coordinate. Our definition allows us to associate rigorously with each reference frame F, a unique "space" (a three-dimensional differentiable manifold), which is the set of the world lines bound to F. This also is very useful for quantum mechanics.

Arminjon, Mayeul

2010-01-01T23:59:59.000Z

159

Molecular-Frame Angular Distributions of Resonant Auger Electrons  

NLE Websites -- All DOE Office Websites (Extended Search)

Molecular-Frame Angular Distributions of Resonant Auger Electrons Print Molecular-Frame Angular Distributions of Resonant Auger Electrons Print Molecular-frame electron angular distribution (MFAD) measurements provide access to an unprecedented level of detailed information about phenomena involving quantum coherence, such as phases of photoelectron waves, symmetry breaking in molecular dissociation, core-hole localization in molecules, and molecular double-slit interference, all of which are hidden in conventional gas-phase electron spectroscopy, owing to the random orientation of the molecules. While most MFAD studies to date have focused on photoelectrons, an international team of scientists from Western Michigan University, the ALS, and Tohoku University in Japan has successfully used a novel approach to determine for the first time the molecular-frame angular distributions of resonantly excited Auger electrons in carbon monoxide.

160

Modeling Laser Wakefield Accelerators in a Lorentz Boosted Frame  

NLE Websites -- All DOE Office Websites (Extended Search)

Modeling Laser Modeling Laser Wakefield Accelerators in a Lorentz Boosted Frame Modeling Laser Wakefield Accelerators in a Lorentz Boosted Frame VayBoost.gif An image showing the "boosted frame," in which the observer moves at near light speed. The laser pulse is represented in blue and red; the wakefields are colored pale blue and yellow. In this frame, the plasma (yellow box) has contracted and the wavefronts are fewer and farther apart, resulting in far fewer calculations and faster results. Why it Matters: Laser driven plasma waves can produce accelerating gradients orders of magnitude greater than standard accelerating structures. High quality electron beams of energy up to 1 GeV have been produced in just a few centimeters and 10-GeV stages being planned as

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Molecular-Frame Angular Distributions of Resonant Auger Electrons  

NLE Websites -- All DOE Office Websites (Extended Search)

Molecular-Frame Angular Distributions of Resonant Auger Electrons Print Molecular-Frame Angular Distributions of Resonant Auger Electrons Print Molecular-frame electron angular distribution (MFAD) measurements provide access to an unprecedented level of detailed information about phenomena involving quantum coherence, such as phases of photoelectron waves, symmetry breaking in molecular dissociation, core-hole localization in molecules, and molecular double-slit interference, all of which are hidden in conventional gas-phase electron spectroscopy, owing to the random orientation of the molecules. While most MFAD studies to date have focused on photoelectrons, an international team of scientists from Western Michigan University, the ALS, and Tohoku University in Japan has successfully used a novel approach to determine for the first time the molecular-frame angular distributions of resonantly excited Auger electrons in carbon monoxide.

162

Framing bioremediation decision making as negotiation: Rationale & guidelineFraming bioremediation decision making as negotiation: Rationale & guidelines  

SciTech Connect

Framing remediation decision making as negotiation: (1) social choice, not technology choice; (2) prompts decision makers to identify interested and affected parties, anticipate objections, effectively address and ameliorate objections, and avoid unacceptable decisions.

Bjornstad, David J.; Wolfe, Amy K.

2004-03-17T23:59:59.000Z

163

Final Reminder:  

NLE Websites -- All DOE Office Websites (Extended Search)

Final Reminder: Final Reminder: Final Reminder: Please save your $SCRATCH and $SCRATCH2 imporant files by 4/30/12 April 27, 2012 by Helen He (0 Comments) Franklin batch system is drained, and all batch queues are stopped as of 4/26 23:59pm. This is the final reminder that please make sure to save important files on your Franklin $SCRATCH and $SCRATCH2. ALL FILES THERE WILL BE DELETED, and there will be no mechanisms to recover any of the files after May 1. Mon Apr 30: Last day to retrieve files from Franklin scratch file systems Mon Apr 30, 23:59: User logins are disabled If you need help or have any concerns, please contact "consult at nersc dot gov". Post your comment You cannot post comments until you have logged in. Login Here. Comments No one has commented on this page yet.

164

Making Steel Framing as Thermally Efficient as Wood  

E-Print Network (OSTI)

In many world regions like North America and Scandinavia wood framing is dominant technology for residential buildings. During last two decades several companies around the world started to promote a low-gage steel framing for residential and commercial buildings. Steel framing has many advantages over wood framing; strength, low weight, dimensional stability, resistance to termite damage, almost 100% recycleability, etc .. However because of several reasons an application of steel as a framing material in US residential building market is relatively low. Steel industry has noticed much more success on commercial building market which is not as rigorous regarding thermal efficiency and energy conservation. Steel framing has one significant disadvantage over wood; Steel members conduct heat extremely well. This effect is known as thermal bridging, and it can sharply reduce a wall's effective Rvalue. The simplest and most common way to overcome this problem is to block the path of heat flow with rigid foam insulation. Adding rigid foam insulation not only increases the whole wall's R-value, but it also reduces the temperature difference between the center of the cavity and the stud area, which cuts down on the possibility of black stains forming from dirt getting asymmetrically attracted to cold spots on a wall's surface. However, rigid foam insulation is an expensive solution. Several material configurations were developed in the past to increase thermal effectiveness of steel-framed structures. This paper is focused on most common options of thermal improvements of steels framed walls. They were as follow: 1) diminishing the contact area between the studs and exterior sheathing materials, 2) reducing the steel stud web area, 3) replacing the steel web with a less conductive material, and 4) placing foam insulation in locations where the thermal shorts are most critical. Researchers at Oak Ridge National Laboratory (ORNL) have utilized both hot box testing and computer simulations in aim to optimize thermal design of steel stud walls.. While examining several material options, ORNL's BTC was also striving to develop energy-efficient steel stud wall technologies that would enable steel-stud walls to beat the performance of traditional 2 x 6 wood stud walls. Several, most current, ORNL developments in steel framing are presented below.

Kosny, J.; Childs, P.

2002-01-01T23:59:59.000Z

165

JOM Salary Survey - TMS  

Science Conference Proceedings (OSTI)

JOM Salary Survey. This survey is currently closed. Please contact the author of this survey for further assistance. Javascript is required for this site to function, ...

166

VLBI observations of weak extragalactic radio sources for the alignment of the future GAIA frame with the ICRF  

E-Print Network (OSTI)

The space astrometry mission GAIA will construct a dense optical QSO-based celestial reference frame. For consistency between the optical and radio positions, it will be important to align the GAIA frame and the International Celestial Reference Frame (ICRF) with the highest accuracy. Currently, it is found that only 10% of the ICRF sources are suitable to establish this link, either because they are not bright enough at optical wavelengths or because they have significant extended radio emission which precludes reaching the highest astrometric accuracy. In order to improve the situation, we have initiated a VLBI survey dedicated to finding additional high-quality radio sources for aligning the two frames. The sample consists of about 450 sources, typically 20 times weaker than the current ICRF sources, which have been selected by cross-correlating optical and radio catalogues. This paper presents the observing strategy and includes preliminary results of observation of 224 of these sources with the European VLBI Network in June 2007.

Geraldine Bourda; Patrick Charlot; Richard Porcas; Simon Garrington

2007-11-21T23:59:59.000Z

167

Non-minimal Higgs inflation and frame dependence in cosmology  

Science Conference Proceedings (OSTI)

We investigate a very general class of cosmological models with scalar fields non-minimally coupled to gravity. A particular representative in this class is given by the non-minimal Higgs inflation model in which the Standard Model Higgs boson and the inflaton are described by one and the same scalar particle. While the predictions of the non-minimal Higgs inflation scenario come numerically remarkably close to the recently discovered mass of the Higgs boson, there remains a conceptual problem in this model that is associated with the choice of the cosmological frame. While the classical theory is independent of this choice, we find by an explicit calculation that already the first quantum corrections induce a frame dependence. We give a geometrical explanation of this frame dependence by embedding it into a more general field theoretical context. From this analysis, some conceptional points in the long lasting cosmological debate: 'Jordan frame vs. Einstein frame' become more transparent and in principle can be resolved in a natural way.

Steinwachs, Christian F. [School of Mathematical Sciences, University of Nottingham University Park, Nottingham, NG7 2RD (United Kingdom); Kamenshchik, Alexander Yu. [Dipartimento di Fisica e Astronomia and INFN, Via Irnerio 46, 40126 Bologna, Italy and L.D. Landau Institute for Theoretical Physics of the Russian Academy of Sciences, Kosygin str. 2, 119334 Moscow (Russian Federation)

2013-02-21T23:59:59.000Z

168

Surveys on the distribution and abundance of the Hawaiian hoary bat (Lasiurus cinereus semotus) in the vicinity of proposed geothermal project subzones in the District of Puna, Hawaii. Final report  

DOE Green Energy (OSTI)

In 1993 the US Fish and Wildlife Service (USFWS) entered into an interagency agreement with the Department of Energy (DOE) to conduct wildlife surveys relative to identifying potential impacts of geothermal resource development on the native biota of the east rift zone of Kilauea volcano in the Puna district on the island of Hawaii. This report presents data on the endangered Hawaiian hoary bat (Hawaiian bat), or opeapea (Lasiurus cinereus semotus), within the proposed Hawaii geothermal subzones. Potential effects of geothermal development on Hawaiian bat populations are also discussed. Surveys were conducted to determine the distribution and abundance of bats throughout the District of Puna. Baseline information was collected to evaluate the status of bats within the study area and to identify important foraging habitats. Little specific data exists in the published literature on the population status and potential limiting factors affecting the Hawaiian bat. A USFWS recovery plan does not exist for this endangered species.

Reynolds, M.; Ritchotte, G.; Dwyer, J.; Viggiano, A.; Nielsen, B.; Jacobi, J.D. [Fish and Wildlife Service, Hawaii National Park, HI (United States). Hawaii Research Station

1994-08-01T23:59:59.000Z

169

Framing Iran: The Islamic Revolution and the Green Movement as Told Through Time Magazine.  

E-Print Network (OSTI)

?? FRAMING IRAN: THE ISLAMIC REVOLUTION AND THE GREEN MOVEMENT AS TOLD THROUGH TIME MAGAZINE by Nadia Maiwandi This framing analysis was conducted to study… (more)

Maiwandi, Nadia

2013-01-01T23:59:59.000Z

170

The influence of media frames on the public's perception of biofuels.  

E-Print Network (OSTI)

??This study analyzes the frames Iowa newspapers used to report on the biofuels issue, and examines the extent to which these media frames are present… (more)

Chang, Shin-heng

2009-01-01T23:59:59.000Z

171

Experimental and Numerical Examination of the Thermal Transmittance of High Performance Window Frames  

E-Print Network (OSTI)

Developing Low -conductance Window Frames: Capabilities andLimitations o f Current Window Heat Transfer Design Tools -Simulations of I nternal Window Frame Caviti es Validated

Gustavsen Ph.D., Arild

2010-01-01T23:59:59.000Z

172

Final Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Final Final Report to Improved Reservoir Access Through Refracture Treatments in Tight Gas Sands and Gas Shales 07122-41.FINAL June 2013 PI Mukul M. Sharma The University of Texas at Austin 200 E. Dean Keeton St. Stop C0300 Austin, Texas 78712 (512) 471---3257 msharma@mail.utexas.edu LEGAL NOTICE This report was prepared by The University of Texas at Austin as an account of work sponsored by the Research Partnership to Secure Energy for America, RPSEA. Neither RPSEA members of RPSEA, the National Energy Technology Laboratory, the U.S. Department of Energy, nor any person acting on behalf of any of the entities: a. MAKES ANY WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED WITH RESPECT TO ACCURACY, COMPLETENESS, OR USEFULNESS OF THE INFORMATION CONTAINED IN THIS DOCUMENT, OR THAT THE

173

Frame transforms, star products and quantum mechanics on phase space  

E-Print Network (OSTI)

Using the notions of frame transform and of square integrable projective representation of a locally compact group $G$, we introduce a class of isometries (tight frame transforms) from the space of Hilbert-Schmidt operators in the carrier Hilbert space of the representation into the space of square integrable functions on the direct product group $G\\times G$. These transforms have remarkable properties. In particular, their ranges are reproducing kernel Hilbert spaces endowed with a suitable 'star product' which mimics, at the level of functions, the original product of operators. A 'phase space formulation' of quantum mechanics relying on the frame transforms introduced in the present paper, and the link of these maps with both the Wigner transform and the wavelet transform are discussed.

P. Aniello; V. I. Man'ko; G. Marmo

2008-02-28T23:59:59.000Z

174

Design options for low-conductivity window frames  

Science Conference Proceedings (OSTI)

The window industry's commercialization of low-emissivity coatings and low-conductivity gas-filling over the past few years has helped to drastically reduce heat transfer rates through the glazed areas of windows. However, few changes have taken place in the design and construction of window frames and edges, leaving these elements to account for most of the heat transfer through today's state-of-the-art windows. This paper presents design and material requirements for the manufacture of low-conductivity window frames obtained through the use of finite element computer modeling. Such frames will compliment and not degrade today's most energy-efficient insulated glass units. 7 refs., 2 figs., 5 tabs.

Byars, N.; Arasteh, D.

1990-10-01T23:59:59.000Z

175

NNSA, LANL Complete DARHT Improvements With Successful Multi-frame  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL Complete DARHT Improvements With Successful Multi-frame LANL Complete DARHT Improvements With Successful Multi-frame Hydrodynamic Test | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Press Releases > NNSA, LANL Complete DARHT Improvements With Successful ... Press Release NNSA, LANL Complete DARHT Improvements With Successful Multi-frame

176

Modeling laser wakefield accelerators in a Lorentz boosted frame  

Science Conference Proceedings (OSTI)

Modeling of laser-plasma wakefield accelerators in an optimal frame of reference is shown to produce orders of magnitude speed-up of calculations from first principles. Obtaining these speedups requires mitigation of a high-frequency instability that otherwise limits effectiveness in addition to solutions for handling data input and output in a relativistically boosted frame of reference. The observed high-frequency instability is mitigated using methods including an electromagnetic solver with tunable coefficients, its extension to accomodate Perfectly Matched Layers and Friedman's damping algorithms, as well as an efficient large bandwidth digital filter. It is shown that choosing the frame of the wake as the frame of reference allows for higher levels of filtering and damping than is possible in other frames for the same accuracy. Detailed testing also revealed serendipitously the existence of a singular time step at which the instability level is minimized, independently of numerical dispersion, thus indicating that the observed instability may not be due primarily to Numerical Cerenkov as has been conjectured. The techniques developed for Cerenkov mitigation prove nonetheless to be very efficient at controlling the instability. Using these techniques, agreement at the percentage level is demonstrated between simulations using different frames of reference, with speedups reaching two orders of magnitude for a 0.1 GeV class stages. The method then allows direct and efficient full-scale modeling of deeply depleted laser-plasma stages of 10 GeV-1 TeV for the first time, verifying the scaling of plasma accelerators to very high energies. Over 4, 5 and 6 orders of magnitude speedup is achieved for the modeling of 10 GeV, 100 GeV and 1 TeV class stages, respectively.

Vay, J.-L.; Geddes, C.G.R.; Cormier-Michel, E.; Grotec, D. P.

2010-06-15T23:59:59.000Z

177

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities  

E-Print Network (OSTI)

2001. Heat transfer in window frames with internal cavities.Simulations of Internal Window Frame Cavities Validatedin Three-Dimensional Window Frames with Internal Cavities. ”

Gustavsen, Arlid

2008-01-01T23:59:59.000Z

178

Department of Energy Quadrennial Technology Review Framing Document  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quadrennial Technology Review Quadrennial Technology Review Framing Document http://energy.gov/QTR 3/14/2011 U.S. Department of ENERGY 2 The United States Department of Energy (DOE) has initiated a review of its energy technology activities (Quadrennial Technology Review, or QTR). This framing document is a principal means of facilitating stakeholder engagement in that process. It describes the nation's energy landscape and challenges, identifies important research, development, and demonstration (RD&D) policy choices to be made, and summarizes the current status of selected energy technologies and DOE technology program goals. It is intended to serve as the common framework for stakeholder engagement through advisory

179

General Analysis of Inflation in the Jordan frame Supergravity  

E-Print Network (OSTI)

We study various inflation models in the Jordan frame supergravity with a logarithmic Kahler potential. We find that, in a class of inflation models containing an additional singlet in the superpotential, three types of inflation can be realized: the Higgs-type inflation, power-law inflation, and chaotic inflation with/without a running kinetic term. The former two are possible if the holomorphic function dominates over the non-holomorphic one in the frame function, while the chaotic inflation occurs when both are comparable. Interestingly, the fractional-power potential can be realized by the running kinetic term. We also discuss the implication for the Higgs inflation in supergravity.

Kazunori Nakayama; Fuminobu Takahashi

2010-09-17T23:59:59.000Z

180

FRAMES Software System: Linking to the Statistical Package R  

SciTech Connect

This document provides requirements, design, data-file specifications, test plan, and Quality Assurance/Quality Control protocol for the linkage between the statistical package R and the Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) Versions 1.x and 2.0. The requirements identify the attributes of the system. The design describes how the system will be structured to meet those requirements. The specification presents the specific modifications to FRAMES to meet the requirements and design. The test plan confirms that the basic functionality listed in the requirements (black box testing) actually functions as designed, and QA/QC confirms that the software meets the client’s needs.

Castleton, Karl J.; Whelan, Gene; Hoopes, Bonnie L.

2006-12-11T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Role of External Flow and Frame Invariance in Stochastic Thermodynamics  

E-Print Network (OSTI)

For configurational changes of soft matter systems affected or caused by external hydrodynamic flow, we identify applied work, exchanged heat, and entropy change on the level of a single trajectory. These expressions guarantee invariance of stochastic thermodynamics under a change of frame of reference. As criterion for equilibrium \\textit{vs.} nonequilibrium, zero \\textit{vs.} nonzero applied work replaces detailed balance \\textit{vs.} nonvanishing currents, since both latter criteria are shown to depend on the frame of reference. Our results are illustrated quantitatively by calculating the large deviation function for the entropy production of a dumbbell in shear flow.

Thomas Speck; Jakob Mehl; Udo Seifert

2007-12-03T23:59:59.000Z

182

2012 NERSC User Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Results 2012 User Survey Text 2012 NERSC User Survey Text The 2012 NERSC User Survey is closed. The following is the text of the survey. Section 1: Overall Satisfaction with...

183

"FutureGen 2.0 Project Final Environmental Impact Statement Volume II"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

APPENDIX F APPENDIX F Cultural Surveys F1 - Phase I - Site Characterization Locale Survey F2 - Phase I - Meredosia Energy Center Survey F3 - Phase I - Bluff Area Pipeline Right-of-Way Segment Survey F4 - Phase I - Soil Gas Monitoring Locations Survey for the Final Environmental Impact Statement FutureGen 2.0 Project Meredosia, Illinois (Morgan County) Note: This appendix was updated for the Final EIS.

184

Electromagnetic pump stator frame having power crossover struts  

DOE Patents (OSTI)

A stator frame for an electromagnetic pump includes a casing joined to a hub by a plurality of circumferentially spaced apart struts. At least one electrically insulated power crossover lead extends through the hub, through a crossover one of the struts, and through the casing for carrying electrical current therethrough.

Fanning, Alan W. (San Jose, CA); Olich, Eugene E. (Aptos, CA)

1995-01-01T23:59:59.000Z

185

Jordan frame supergravity and inflation in the NMSSM  

SciTech Connect

We present a complete explicit N=1, d=4 supergravity action in an arbitrary Jordan frame with nonminimal scalar-curvature coupling of the form {Phi}(z,z)R. The action is derived by suitably gauge fixing the superconformal action. The theory has a modified Kaehler geometry, and it exhibits a significant dependence on the frame function {Phi}(z,z) and its derivatives over scalars, in the bosonic as well as in the fermionic part of the action. Under certain simple conditions, the scalar kinetic terms in the Jordan frame have a canonical form. We consider an embedding of the next-to-minimal supersymmetric standard model (NMSSM) gauge theory into supergravity, clarifying the Higgs inflation model recently proposed by Einhorn and Jones. We find that the conditions for canonical kinetic terms are satisfied for the NMSSM scalars in the Jordan frame, which leads to a simple action. However, we find that the gauge singlet field experiences a strong tachyonic instability during inflation in this model. Thus, a modification of the model is required to support the Higgs-type inflation.

Ferrara, Sergio [Physics Department, Theory Unit, CERN, CH 1211, Geneva 23 (Switzerland); INFN - Laboratori Nazionali di Frascati, Via Enrico Fermi 40, 00044 Frascati (Italy); Kallosh, Renata; Linde, Andrei [Department of Physics, Stanford University, Stanford, California 94305 (United States); Marrani, Alessio; Van Proeyen, Antoine [Instituut voor Theoretische Fysica, Katholieke Universiteit Leuven, Celestijnenlaan 200D, B-3001 Leuven (Belgium)

2010-08-15T23:59:59.000Z

186

A frame knowledge system for managing financial decision knowledge  

Science Conference Proceedings (OSTI)

Managing decision knowledge or expertise from domain experts is one of the most exciting challenges in today's knowledge management field. The nature of decision knowledge in determining a firm's financial health is context-dependent, intangible, and ... Keywords: Financial decision management, Frame knowledge representation, Jess, Knowledge acquisition, Knowledge-based system

Weissor Shiue; Sheng-Tun Li; Kuan-Ju Chen

2008-10-01T23:59:59.000Z

187

Plastic limit analysis of frames using ant colony systems  

Science Conference Proceedings (OSTI)

In recent years, heuristic algorithms such as simulated annealing, genetic and ant colony algorithms have found many applications in optimization problems. In this paper, ant colony systems (ACSs) are used to optimize the process of finding the collapse ... Keywords: Ant colony systems, Collapse load factor, Planar frames, Plastic limit analysis

A. Kaveh; M. Jahanshahi

2008-06-01T23:59:59.000Z

188

Capturing episodes: may the frame be with you  

Science Conference Proceedings (OSTI)

We are interested in detecting episodes in a data stream that are characterized by a period of time over which a condition holds, usually with a minimum duration. For example, we might want to know whenever any router has a packet-drop rate above 0.3% ... Keywords: DSMS, NiagaraST, data streams, episodes, frames, windows

David Maier; Michael Grossniklaus; Sharmadha Moorthy; Kristin Tufte

2012-07-01T23:59:59.000Z

189

STATE OF CALIFORNIA QUALITY INSULATION INSTALLATION FRAMING STAGE CHECKLIST  

E-Print Network (OSTI)

be accepted by the building department or HERS rater. SPF insulation can be considered an air barrier when be insulated. These areas shall be called out on the building plans with diagrams and/or specific designSTATE OF CALIFORNIA QUALITY INSULATION INSTALLATION ­ FRAMING STAGE CHECKLIST CEC-CF-4R-ENV-21

190

Deep Frames, White Men's Discourse, and Black Female Bodies  

E-Print Network (OSTI)

In this qualitative study, I examine the persistent trend of black women as an excluded relationship partner for white men. Integral to understanding the exclusion of black women as relationship partners is the construction of black female bodies, by influential white men historically and contemporarily, as the abject opposite of hegemonic femininity, which holds "middle-class, heterosexual, [w]hite femininity" as the norm (Collins 2005:193). This construction essentially places black women outside the bounds of hegemonic femininity, beauty, sexuality, and womanhood. Using the theoretical concept deep frame, which is the "conceptual infrastructure of the mind" (Lakoff 2006a:12) and representative of one's commonsense world view, I argue that the ways in which influential white men have constructed black female bodies is a critical component of the raced, gendered, and classed deep frame of white men. This deep frame undergirds how many white men perceive, interpret, understand, emote, and engage in actions where black women are concerned. Hence in this study, I qualitatively examine, through analyzing and interpreting the in-depth online questionnaires of 134 white male respondents, how the deep frame of white men affects how they perceive black women and ultimately the relationships they seek with black women. The results of the study show that many white male respondents, despite most having very limited or no personal interactions with black women, viewed black women through the one-dimensional lens of the raced, gendered, and classed deep frame. Many respondents perceived black women as unattractive unless capable of a white normative standard, as possessing a negative "black" culture, and as possessing negative and "unfeminine" attributes that make them complicit in their own rejection. These findings show how the deep frame disciplines white men to view black women as "out of bounds" as legitimate relationship partners, and disciplines the types of relationships they seek with black women. The results of this study also reveal that the conceptual approach of deep frame rooted in an understanding of the power of influential white men to control and construct society provides a theoretical alternative to the outmoded interracial marriage theories of caste and exchange.

Slatton, Brittany C.

2009-08-01T23:59:59.000Z

191

Syntactic and Semantic Role Labeling for Chinese FrameNet Based on Cascaded Conditional Random Fields  

Science Conference Proceedings (OSTI)

The Chinese FrameNet Project is creating a lexical resource for Chinese, based on the principles of Frame Semantics and supported by corpus evidence. Due to the fact that syntactic and semantic role labeling (SSRL) is very necessary for deep natural ... Keywords: Frame Semantics, Chinese FrameNet, syntactic and semantic role labeling, cascaded conditional random fields

Hao Xiaoyan; Chang Xiaoming; Liu Kaiying

2009-08-01T23:59:59.000Z

192

Modeling laser wakefield accelerators in a Lorentz boosted frame  

Science Conference Proceedings (OSTI)

Modeling of laser-plasma wakefield accelerators in an optimal frame of reference [1] is shown to produce orders of magnitude speed-up of calculations from first principles. Obtaining these speedups requires mitigation of a high frequency instability that otherwise limits effectiveness in addition to solutions for handling data input and output in a relativistically boosted frame of reference. The observed high-frequency instability is mitigated using methods including an electromagnetic solver with tunable coefficients, its extension to accomodate Perfectly Matched Layers and Friedman's damping algorithms, as well as an efficient large bandwidth digital filter. It is shown that choosing theframe of the wake as the frame of reference allows for higher levels of filtering and damping than is possible in other frames for the same accuracy. Detailed testing also revealed serendipitously the existence of a singular time step at which the instability level is minimized, independently of numerical dispersion, thus indicating that the observed instability may not be due primarily to Numerical Cerenkov as has been conjectured. The techniques developed for Cerenkov mitigation prove nonetheless to be very efficient at controlling the instability. Using these techniques, agreement at the percentage level is demonstrated between simulations using different frames of reference, with speedups reaching two orders of magnitude for a 0.1 GeV class stages. The method then allows direct and efficient full-scale modeling of deeply depleted laser-plasma stages of 10 GeV-1 TeV for the first time, verifying the scaling of plasma accelerators to very high energies. Over 4, 5 and 6 orders of magnitude speedup is achieved for the modeling of 10 GeV, 100 GeV and 1 TeV class stages, respectively.

Vay, J.-L.; Geddes, C.G.R.; Cormier-Michel, E.; Grote, D.P.

2010-09-15T23:59:59.000Z

193

Sample design for the residential energy consumption survey  

SciTech Connect

The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

1994-08-01T23:59:59.000Z

194

FINAL REPORT  

NLE Websites -- All DOE Office Websites (Extended Search)

FINAL REPORT AEC-ERDA Research Contract AT (11-1) 2174 Columbia University's Nevis Laboratories "Research in Neutron Velocity Spectroscopy" James RainwatGr DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or

195

Towards hard x-ray imaging at GHz frame rate  

SciTech Connect

Gigahertz (GHz) imaging using hard x-rays ( Greater-Than-Or-Equivalent-To 10 keV) can be useful to high-temperature plasma experiments, as well as research and applications using coherent photons from synchrotron radiation and x-ray free electron lasers. GHz framing rate can be achieved by using multiple cameras through multiplexing. The advantages and trade-offs of single-photon detection mode, when no more than one x-ray photon is detected per pixel, are given. Two possible paths towards x-ray imaging at GHz frame rates using a single camera are: (a) avalanche photodiode arrays of high-Z materials and (b) microchannel plate photomultipliers in conjunction with materials with large indices of refraction.

Wang Zhehui; Morris, C. L.; Kapustinsky, J. S.; Kwiatkowski, K.; Luo, S.-N. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2012-10-15T23:59:59.000Z

196

Towards hard X-ray imaging at GHz frame rate  

Science Conference Proceedings (OSTI)

Gigahertz (GHz) imaging using hard X-rays ({approx}> 10 keV) can be useful to high-temperature plasma experiments, as well as research using coherent photons from synchrotron radiation and X-ray free electron lasers. GHz framing rate can be achieved by using multiple cameras through multiplexing. The advantages and trade-offs of single-photon detection mode, when no more than one X-ray photon is detected per pixel, are given. Two possible paths towards X-ray imaging at GHz frame rates using a single camera are (a) Avalanche photodiode arrays of high-Z materials and (b) Microchannel plate photomultipliers in conjunction with materials with large indices of refraction.

Wang, Zhehui [Los Alamos National Laboratory; Morris, Christopher [Los Alamos National Laboratory; Luo, Shengnian [Los Alamos National Laboratory; Kwiatkowski, Kris K. [Los Alamos National Laboratory; Kapustinsky, Jon S. [Los Alamos National Laboratory

2012-05-02T23:59:59.000Z

197

Using FRAMES to Manage Environmental and Water Resources  

Science Conference Proceedings (OSTI)

The Framework for Risk Analysis in Multimedia Environmental Systems FRAMES) is decision-support middleware that provides users the ability to design software solutions for complex problems. It is a software platform that provides seamless and transparent communication between modeling components by using a multi-thematic approach to provide a flexible and holistic understanding of how environmental factors potentially affect humans and the environment. It incorporates disparate components (e.g., models, databases, and other frameworks) that integrate across scientific disciplines, allowing for tailored solutions to specific activities. This paper discusses one example application of FRAMES, where several commercialoff-the-shelf (COTS) software products are seamlessly linked into a planning and decision-support tool that helps manage water-based emergency situations and sustainable response. Multiple COTS models, including three surface water models, and a number of databases are linked through FRAMES to assess the impact of three asymmetric and simultaneous events, two of which impact water resources. The asymmetric events include 1) an unconventional radioactive release into a large potable water body, 2) a conventional contaminant (oil) release into navigable waters, and 3) an instantaneous atmospheric radioactive release.

Whelan, Gene; Millard, W. David; Gelston, Gariann M.; Khangaonkar, Tarang P.; Pelton, Mitch A.; Strenge, Dennis L.; Yang, Zhaoqing; Lee, Cheegwan; Sivaraman, Chitra; Stephan, Alex J.; Hoopes, Bonnie L.; Castleton, Karl J.

2007-05-16T23:59:59.000Z

198

Seismic Rehabilitation of RC Frames by Using Steel Panels  

Science Conference Proceedings (OSTI)

Every major earthquake in Turkey causes a large number of building suffer moderate damage due to poor construction. If a proper and fast retrofit is not applied, the aftershocks, which may sometimes come days or weeks after the main shock, can push a moderately damaged building into a major damage or even total collapse. This paper presents a practical retrofit method for moderately damaged buildings, which increases the seismic performance of the structural system by reducing the displacement demand. Fabricated steel panels are used for the retrofit. They are light-weight, easy to handle, and can be constructed very quickly. Moreover, they are cheap, and do not need formwork or skilled workers. They can be designed to compensate for the stiffness and strength degradation, and to fit easily inside a moderately damaged reinforced concrete frame.To test the concept, a half-scale, single-story 3D reinforced concrete frame specimen was constructed at the shake-table laboratories of the Kandilli Observatory and Earthquake Research Institute of Bogazici University, and subjected to recorded real earthquake base accelerations. The amplitudes of base accelerations were increased until a moderate damage level is reached. Then, the damaged RC frames was retrofitted by means of steel panels and tested under the same earthquake. The seismic performance of the specimen before and after the retrofit was evaluated using FEMA356 standards, and the results were compared in terms of stiffness, strength, and deformability. The results have confirmed effectiveness of the proposed retrofit scheme.

Mowrtage, Waiel [Kandilli Observatory and Earthquake Research Institute of Bogazici University, Earthquake Engineering Department, Istanbul (Turkey)

2008-07-08T23:59:59.000Z

199

AN HST/WFC3-IR MORPHOLOGICAL SURVEY OF GALAXIES AT z = 1.5-3.6. I. SURVEY DESCRIPTION AND MORPHOLOGICAL PROPERTIES OF STAR-FORMING GALAXIES  

SciTech Connect

We present the results of a 42-orbit Hubble Space Telescope Wide-Field Camera 3 (HST/WFC3) survey of the rest-frame optical morphologies of star-forming galaxies with spectroscopic redshifts in the range z = 1.5-3.6. The survey consists of 42 orbits of F160W imaging covering {approx}65 arcmin{sup 2} distributed widely across the sky and reaching a depth of 27.9 AB for a 5{sigma} detection within a 0.2 arcsec radius aperture. Focusing on an optically selected sample of 306 star-forming galaxies with stellar masses in the range M{sub *} = 10{sup 9}-10{sup 11} M{sub Sun }, we find that typical circularized effective half-light radii range from {approx}0.7 to 3.0 kpc and describe a stellar mass-radius relation as early as z {approx} 3. While these galaxies are best described by an exponential surface brightness profile (Sersic index n {approx} 1), their distribution of axis ratios is strongly inconsistent with a population of inclined exponential disks and is better reproduced by triaxial stellar systems with minor/major and intermediate/major axis ratios {approx}0.3 and 0.7, respectively. While rest-UV and rest-optical morphologies are generally similar for a subset of galaxies with HST/Advanced Camera for Surveys imaging data, differences are more pronounced at higher masses M{sub *} > 3 Multiplication-Sign 10{sup 10} M{sub Sun }. Finally, we discuss galaxy morphology in the context of efforts to constrain the merger fraction, finding that morphologically identified mergers/non-mergers generally have insignificant differences in terms of physical observables such as stellar mass and star formation rate, although merger-like galaxies selected according to some criteria have statistically smaller effective radii and correspondingly larger {Sigma}{sub SFR}.

Law, David R.; Shapley, Alice E.; Nagy, Sarah R. [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Steidel, Charles C. [Department of Astronomy, California Institute of Technology, MS 249-17, Pasadena, CA 91125 (United States); Reddy, Naveen A. [National Optical Astronomy Observatories, 950 North Cherry Avenue, Tucson, AZ 85719 (United States); Erb, Dawn K., E-mail: drlaw@astro.ucla.edu, E-mail: aes@astro.ucla.edu, E-mail: snagy@ucla.edu, E-mail: ccs@astro.caltech.edu [Department of Physics, University of Wisconsin-Milwaukee, P.O. Box 413, Milwaukee, WI 53201 (United States)

2012-01-20T23:59:59.000Z

200

1998 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

8 User Survey Results 1998 User Survey Results Respondent Summary NERSC has completed its first user survey since its move to Lawrence Berkeley National Laboratory. The survey is...

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Robotic Surveying  

SciTech Connect

ZAPATA ENGINEERING challenged our engineers and scientists, which included robotics expertise from Carnegie Mellon University, to design a solution to meet our client's requirements for rapid digital geophysical and radiological data collection of a munitions test range with no down-range personnel. A prime concern of the project was to minimize exposure of personnel to unexploded ordnance and radiation. The field season was limited by extreme heat, cold and snow. Geographical Information System (GIS) tools were used throughout this project to accurately define the limits of mapped areas, build a common mapping platform from various client products, track production progress, allocate resources and relate subsurface geophysical information to geographical features for use in rapidly reacquiring targets for investigation. We were hopeful that our platform could meet the proposed 35 acres per day, towing both a geophysical package and a radiological monitoring trailer. We held our breath and crossed our fingers as the autonomous Speedrower began to crawl across the playa lakebed. We met our proposed production rate, and we averaged just less than 50 acres per 12-hour day using the autonomous platform with a path tracking error of less than +/- 4 inches. Our project team mapped over 1,800 acres in an 8-week (4 days per week) timeframe. The expertise of our partner, Carnegie Mellon University, was recently demonstrated when their two autonomous vehicle entries finished second and third at the 2005 Defense Advanced Research Projects Agency (DARPA) Grand Challenge. 'The Grand Challenge program was established to help foster the development of autonomous vehicle technology that will some day help save the lives of Americans who are protecting our country on the battlefield', said DARPA Grand Challenge Program Manager, Ron Kurjanowicz. Our autonomous remote-controlled vehicle (ARCV) was a modified New Holland 2550 Speedrower retrofitted to allow the machine-actuated functions to be controlled by an onboard computer. The computer-controlled Speedrower was developed at Carnegie Mellon University to automate agricultural harvesting. Harvesting tasks require the vehicle to cover a field using minimally overlapping rows at slow speeds in a similar manner to geophysical data acquisition. The Speedrower had demonstrated its ability to perform as it had already logged hundreds of acres of autonomous harvesting. This project is the first use of autonomous robotic technology on a large-scale for geophysical surveying.

Suzy Cantor-McKinney; Michael Kruzic

2007-03-01T23:59:59.000Z

202

Documents: Final PEIS  

NLE Websites -- All DOE Office Websites (Extended Search)

Final PEIS Search Documents: Search PDF Documents View a list of all documents Final Programmatic EIS DOEEIS-0269 Final Programmatic Environmental Impact Statement for...

203

Final report  

SciTech Connect

Calabazas Creek Research Inc. (CCR) has investigated the feasibility of a 30 GHz gyroklystron amplifier for driving advanced accelerators. Gyroklystrons have been shown to be efficient sources of high power radiation at frequencies above X-Band and are, therefore, well suited for driving high frequency accelerators. CCR's gyroklystron design includes a novel inverted magnetron injection gun (MIG) that allows support and cooling of the coaxial inner conductor of the circuit. This novel gun provides a very high quality electron beam, making it possible to achieve a cavity design with an efficiency of 54%. During Phase I, it was determined that the original frequency of 17 GHz was no longer well matched to the potential market. A survey of accelerator needs identified the Compact Linear Collider (CLIC) as requiring 30 GHz sources for testing of accelerator structures. Developers at CLIC are seeking approximately 25 MW per tube. This will result in the same power density as in the original 80 MW, 17 GHz device and will thus have essentially the same risk. CLIC will require initially 3-4 tubes and eventually 12-16 tubes. This quantity represents $5M-$10M in sales. In addition, gyroklystrons are of interest for radar systems and electron paramagnetic resonance (EPR) instruments. Following discussions with the Department of Energy, it was determined that changing the program goal to the CLIC requirement was in the best interest of CCR and the funding agency. The Phase I program resulted in a successful gyroklystron design with a calculated efficiency of 54% with an output power of 33 MW. Design calculations for all critical components are complete, and no significant technical issues remain.

Michael Read, Wesley Lawson, George Miram, David Marsden, Philipp Borchard,pborchard@gmx.net

2005-12-01T23:59:59.000Z

204

Conservation laws and tachyon potentials in the sliver frame  

E-Print Network (OSTI)

Conservation laws have provided an elegant and efficient tool to evaluate the open string field theory interaction vertex, they have been originally implemented in the case where the string field is expanded in the Virasoro basis. In this work we derive conservation laws in the case where the string field is expanded in the so-called sliver $\\mathcal{L}_0$-basis. As an application of these conservation laws derived in the sliver frame, we compute the open string field action relevant to the tachyon condensation and in order to present not only an illustration but also an additional information, we evaluate the action without imposing a gauge choice.

E. Aldo Arroyo

2011-03-24T23:59:59.000Z

205

Content Analysis for Proactive Intelligence: Marshaling Frame Evidence.  

Science Conference Proceedings (OSTI)

Modeling and simulation have great potential as technologies capable of aiding analysts in making accurate predictions of future situations to help provide competitive advantage and avoid strategic surprise. However, to make modeling and simulation effective, an evidence-marshaling process is needed that addresses the information needs of the modeling task, as detailed by subject matter experts. We suggest that such an evidence-marshaling process can be obtained by combining natural language processing and content analysis techniques to provide quantified qualitative content assessments, and describe a case study on the acquisition and marshaling of frames from unstructured text.

Sanfilippo, Antonio [Pacific Northwest National Laboratory (PNNL); Cowell, Andrew [Pacific Northwest National Laboratory (PNNL); Pouchard, Line Catherine [ORNL

2007-07-01T23:59:59.000Z

206

Performance analysis of a framed ALOHA system with diversity frequency hopping  

Science Conference Proceedings (OSTI)

In this paper, we study the performance of a framed ALOHA system that employs slow frequency-hopping techniques. A new strategy that employs diversity transmission (multiple frequency-hopping) techniques to enhance the performance of a framed ALOHA system ...

In-Hang Chung; Ming-Ching Yen

2006-08-01T23:59:59.000Z

207

Simulating relativistic beam and plasma systems using an optimal boosted frame  

E-Print Network (OSTI)

beam; (b) the average energy history of the electron beams.frame. The average beam energy history reveals agreement at

Vay, J.-L.

2009-01-01T23:59:59.000Z

208

WIPP Subsidence Monument Leveling Survey - 2005  

Science Conference Proceedings (OSTI)

Sections 2 through 7 of this report define the result of the 2005 leveling survey through the subsidence monuments at the WIPP site. Approximately 15 miles of leveling was completed through nine vertical control loops. The 2005 survey includes the determination of elevation on each of the 48 existing subsidence monuments and the WIPP baseline survey, and 14 of the National Geodetic Survey’s (NGS) vertical control points. The field observations were completed during September through November of 2005 by personnel from the Washington TRU Solutions (WTS) Surveying Group, Mine Engineering Department. Additional rod personnel were provided by the Geotechnical Engineering Department. Digital leveling techniques were utilized to achieve better than Second Order Class II loop closures as outlined by the Federal Geodetic Control Subcommittee (FGCS). Because it is important to perform the subsidence survey in exactly the same manner each year, WIPP procedure (WP 09-ES4001) details each step of the survey. Starting with the 2002 survey this procedure has been used to perform the subsidence survey. Starting with the survey of the year 2001, Loop 1 and redundant survey connections among the various loops were removed from the survey and report. This resulted in a reduction of fieldwork with no loss of accuracy or precision. The redundant connections caused multiple elevations for the same stations. The differences were so slight that they were not used in elevation adjustments for the loops. The redundancy was used to spot gross errors in the field. After several years of surveying these loops it is evident that no gross errors occur that are not also evident in the loop closures. Finally, Section 8 contains Table F, which summarizes the elevations for all surveys from 1987 through 2005, inclusive. A detailed listing of the 1986 through 1997 surveys is contained in the report, WIPP Subsidence Monument Leveling Surveys 1986-1997, DOE/WIPP 98-2293. A reference to the summary reports for each year after 1997 is listed in the reference section of this document.

Washington TRU Solutions LLC

2005-12-01T23:59:59.000Z

209

Customer Feedback during Development of 1998 MECS: Mail/Electronic Survey  

U.S. Energy Information Administration (EIA) Indexed Site

1998 MECS User Needs 1998 MECS User Needs Mail/Electronic Survey Results A mail/electronic survey was conducted as part of the process to collect information on the data needs of MECS customers. The collection time frame was May 1 through July 31, 1998. The survey portion has been completed, and the total results are now available. During this three-month period, the electronic user-needs survey received about 207 hits. Yet, only 15 of those hits resulted in the transmission of a completed survey. Exactly 239 surveys were mailed to customers on the mailing list of the MECS publication. A total of 50 completed surveys (21% response rate) were returned, 32 of which resulted from a follow-up mail request. Only two surveys were returned by the 11 trade associations that were identified as MECS users. Where appropriate, the replies of those two TRADE

210

Low Complexity Spatio-Temporal Key Frame Encoding for Wyner-Ziv Video Coding  

Science Conference Proceedings (OSTI)

In most Wyner-Ziv video coding approaches, the temporal correlation of key frames is not exploited since they are simply intra encoded and decoded. In this paper, using the previously decoded key frame as the side information for the key frame to be ... Keywords: Wyner-Ziv coding, Distributed video coding

Ghazaleh Esmaili; Pamela Cosman

2009-03-01T23:59:59.000Z

211

Estimating the Most Steady Frame of Reference from Doppler Radar Data  

Science Conference Proceedings (OSTI)

A method is described to determine the most steady frame of reference of a weather system from data from one or more Doppler radars at three analysis times. The most steady frame of reference is that frame in which the velocity field displays the ...

Thomas Matejka

2002-07-01T23:59:59.000Z

212

Cooling air recycling for gas turbine transition duct end frame and related method  

SciTech Connect

A method of cooling a transition duct end frame in a gas turbine includes the steps of a) directing cooling air into the end frame from a region external of the transition duct and the impingement cooling sleeve; and b) redirecting the cooling air from the end frame into the annulus between the transition duct and the impingement cooling sleeve.

Cromer, Robert Harold (Johnstown, NY); Bechtel, William Theodore (Scotia, NY); Sutcu, Maz (Niskayuna, NY)

2002-01-01T23:59:59.000Z

213

Numerical analysis of sheathing boards influence on racking resistance of timber-frame walls  

Science Conference Proceedings (OSTI)

This paper provides a numerical analysis of sheathing boards influence on racking resistance of timber-frame walls coated with single sheathing boards fastened to a timber frame. Worldwide, the walls are usually broadly used as main bearing capacity ... Keywords: Fibre-plaster boards, Numerical analysis, OSB, Racking resistance, Timber structures, Timber-framed walls

M. Premrov; P. Dobrila

2012-03-01T23:59:59.000Z

214

Installation of a fast framing visible camera on KSTAR  

Science Conference Proceedings (OSTI)

Visible camera technologies have made remarkable progress in recent years, and the fast camera has proven itself to be a capable imaging diagnostic in studies of specific fusion plasma issues such as the start-up physics, plasma wall interactions, edge-localized modes, and disruptions. For the purpose of favorable visible imaging, a fast framing camera has recently been installed on the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The camera uses a complementary metal-oxide semiconductor detector with a maximum resolution of 1280x1024 at 1000 frames/s (fps) and a minimum resolution of 1280x16 at 64 kfps. A 2-m-long viewport having a novel optical rail system was installed on a tangential port to view the tokamak interior. The system is fully controlled from the main control room and protected by a shutter from deposits. To verify that the camera electronics are safe from the high magnetic field and its rapid time variation, possible influences are considered theoretically and experimentally. In this work, we present the design and installation of the fast camera system on the KSTAR device with discussions on the field variation effect issues.

Chung, Jinil; Lee, Deok Kyo; Seo, Dongcheol [National Fusion Research Institute, Gwahangno 113, Daejeon 305-333 (Korea, Republic of); Choi, Myoung Choul [Korea Basic Science Institute, 804-1 Ochang, Cheongwon 363-883 (Korea, Republic of)

2008-10-15T23:59:59.000Z

215

Final Report  

DOE Green Energy (OSTI)

This document describes the results of a DOE funded joint effort of Membrane Technology and Research Inc. (MTR), SRI International (SRI), and ABB Lummus (ABB) to develop facilitated transport membranes for olefin/paraffin separations. Currently, olefin/paraffin separation is done by distillation—an extremely energy-intensive process because of the low relative volatilities of olefins and paraffins. If facilitated transport membranes could be successfully commercialized, the potential energy savings achievable with this membrane technology are estimated to be 48 trillion Btu per year by the year 2020. We discovered in this work that silver salt-based facilitated transport membranes are not stable even in the presence of ideal olefin/paraffin mixtures. This decline in membrane performance appears to be caused by a previously unrecognized phenomenon that we have named olefin conditioning. As the name implies, this mechanism of performance degradation becomes operative once a membrane starts permeating olefins. This project is the first study to identify olefin conditioning as a significant factor impacting the performance of facilitated olefin transport membranes. To date, we have not identified an effective strategy to mitigate the impact of olefin conditioning. other than running at low temperatures or with low olefin feed pressures. In our opinion, this issue must be addressed before further development of facilitated olefin transport membranes can proceed. In addition to olefin conditioning, traditional carrier poisoning challenges must also be overcome. Light, hydrogen, hydrogen sulfide, and acetylene exposure adversely affect membrane performance through unwanted reaction with silver ions. Harsh poisoning tests with these species showed useful membrane lifetimes of only one week. These tests demonstrate a need to improve the stability of the olefin complexing agent to develop membranes with lifetimes satisfactory for commercial application. A successful effort to improve membrane coating solution stability resulted in the finding that membrane performance loss could be reversed for all poisoning cases except hydrogen sulfide exposure. This discovery offers the potential to extend membrane lifetime through cyclic regeneration. We also found that certain mixed carriers exhibited greater stability in reducing environments than exhibited by silver salt alone. These results offer promise that solutions to deal with carrier poisoning are possible. The main achievement of this program was the progress made in gaining a more complete understanding of the membrane stability challenges faced in the use of facilitated olefin transport membranes. Our systematic study of facilitated olefin transport uncovered the full extent of the stability challenge, including the first known identification of olefin conditioning and its impact on membrane development. We believe that significant additional fundamental research is required before facilitated olefin transport membranes are ready for industrial implementation. The best-case scenario for further development of this technology would be identification of a novel carrier that is intrinsically more stable than silver ions. If the stability problems could be largely circumvented by development of a new carrier, it would provide a clear breakthrough toward finally recognizing the potential of facilitated olefin transport. However, even if such a carrier is identified, additional development will be required to insure that the membrane matrix is a benign host for the olefin-carrier complexation reaction and shows good long-term stability.

Merkel, T.C.; Blanc, R.; Zeid, J.; Suwarlim, A.; Firat, B.; Wijmans, H.; Asaro, M. (SRI); Greene, M. (Lummus)

2007-03-12T23:59:59.000Z

216

WIPP Subsidence Monument Leveling Survey - 2004  

Science Conference Proceedings (OSTI)

Sections 2 through 7 of this report define the result of the 2004 leveling survey through the subsidence monuments at the WIPP site. Approximately 15 miles of leveling was completed through nine vertical control loops. The 2004 survey includes the determination of elevation on each of the 48 existing subsidence monuments and the WIPP baseline survey, and 14 of the National Geodetic Survey's (NGS) vertical control points. The field observations were completed during August through November of 2004 by personnel from the WashingtonTRU Solutions (WTS) Surveying Group, Mine Engineering Department. Additional rod personnel were provided by the Geotechnical Engineering department. Digital leveling techniques were utilized to achieve better than Second Order Class II loop closures as outlined by the Federal Geodetic Control Subcommittee (FGCS). Because it is important to perform the subsidence survey in exactly the same manner each year, WIPP procedure (WP 09-ES4001) details each step of the survey. Starting with the 2002 survey this procedure has been used to perform the subsidence survey. Starting with the survey of the year 2001, Loop 1 and redundant survey connections among the various loops were removed from the survey and report. This resulted in a reduction of fieldwork with no loss of accuracy or precision. The redundant connections caused multiple elevations for the same stations. The differences were so slight that they were not used in elevation adjustments for the loops. The redundancy was used to spot gross errors in the field. After several years of surveying these loops it is evident that no gross errors occur that are not also evident in the loop closures. Finally, Section 8 contains Table F, which summarizes the elevations for all surveys from 1987 through 2004, inclusive. A detailed listing of the 1986 through 1997 surveys is contained in the report, WIPP Subsidence Monument Leveling Surveys 1986-1997, DOE/WIPP 98-2293. A reference to the summary reports for each year after 1997 is listed in the reference section of this document.

Washington TRU Solutions LLC

2004-12-21T23:59:59.000Z

217

A guide to surveys of motor vehicle fleets  

DOE Green Energy (OSTI)

In response to directives in Section 407 of the Energy Policy Act of 1992 (EPACT), the Energy Information Administration (EIA) developed a data collection program designed to provide information useful to persons interested in the alternative fuels market. The target audience includes those seeking to manufacture, convert, sell, own, or operate alternative-fuel vehicles (AFVs) or alternative fueling facilities. Among the various projects EIA conducted as part of this data collection program were two fleet surveys conducted in Department of Energy-designated Clean Cities. The Clean Cities program is a locally-based government/industry partnership coordinated by the Department of Energy to expand the use of alternative transportation fuels. These surveys were designed to collect a broad range of information regarding the fleets and fleet vehicles in operation in the Atlanta, Georgia and Denver, Colorado areas. One of the objectives of these surveys was to attempt to identify and describe the market for AFVs. Due to inherent limitations associated with AFVs and limited alternative-fuel infrastructure, it`s believed that the first practical applications for AFVs will be within private and government fleets. Another objective in conducting the Clean Cities Fleet surveys was to develop a useful methodology for accessing and surveying private and municipal fleets that would aid other interested parties in conducting similar surveys. This report is intended to provide a description of how EIA gathered information on private and municipal fleets, but the basic survey design could be used to design surveys of other difficult-to-access populations. There are 3 basic steps to any survey: define the target population, constructing the survey frame, and implementing the survey. The procedures outlined in this report are, for the most part, the procedures used for the fleet survey conducted in Denver. The major changes between the two surveys are described in Appendix A.

NONE

1996-11-01T23:59:59.000Z

218

User_LaunchSurvey  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Completing Assigned Survey and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Launching and Completing Assigned Survey Purpose The purpose of this job aid is to guide users through the step-by-step process of launching and completing assigned surveys. Task A. Launch and Complete Assigned Survey From the Home page, filter the To-Do List to show only Surveys. Hover over the course evaluation title. Click Open. 1 2 3 3 2 1 Launch and Complete Assigned Survey 6 Steps Task A SuccessFactors Learning v 6.4 User Job Aid Launching and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 2 - SuccessFactors Learning Complete the survey by selecting the radio button for the appropriate rating

219

Improving the thermal performance of vinyl-framed windows  

Science Conference Proceedings (OSTI)

Over the last five years, vinyl-framed windows have gained an increased market share in both new and retrofit residential construction. This success has been mainly due to their low manufacturing cost and relatively good thermal performance (i.e., total window U-values with double glazing between 0.50 Btu/h{center_dot}ft{sup 2}{center_dot}{degree}F [2.86 W/m{sup 2}{center_dot}K] and 0.30 Btu/h{center_dot}ft{sup 2}{center_dot}{degree}F [1.70 W/m{sup 2}{center_dot}K]). Turning such windows into ``superwindows,`` windows with a U-value of 0.20 Btu/h{center_dot}ft{sup 2}{center_dot}{degree}F (1.14 W/m{sup 2}{center_dot}K) or less that can act as passive solar elements even on north-facing orientations in cold climates, requires further significant decreases in heat transfer through both the glazing system and the frame/edge. Three-layer glazing systems (those with two low-emissivity coatings and a low-conductivity gas fill) offer center-of-glass U-values as low as 0.10 Btu/h{center_dot}ft{sup 2}{center_dot}{degree}F (0.57 W/m{sup 2}{center_dot}K); such glazings are being manufactured today and can be incorporated into existing or new vinyl frame profiles. This paper focuses on the use of a state-of the-art infrared imaging system and a two-dimensional finite-difference model to improve the thermal performance of commercially available vinyl profiles and glazing edge systems. Such evaluation tools are extremely useful in identifying exactly which components and design features limit heat transfer and which act as thermal short circuits. Such an analysis is not possible with conventional whole-window testing in hot boxes where testing uncertainties with superwindows are often greater than proposed improvements.

Beck, F.A.; Arasteh, D.

1992-10-01T23:59:59.000Z

220

Improving the thermal performance of vinyl-framed windows  

Science Conference Proceedings (OSTI)

Over the last five years, vinyl-framed windows have gained an increased market share in both new and retrofit residential construction. This success has been mainly due to their low manufacturing cost and relatively good thermal performance (i.e., total window U-values with double glazing between 0.50 Btu/h[center dot]ft[sup 2][center dot][degree]F [2.86 W/m[sup 2][center dot]K] and 0.30 Btu/h[center dot]ft[sup 2][center dot][degree]F [1.70 W/m[sup 2][center dot]K]). Turning such windows into superwindows,'' windows with a U-value of 0.20 Btu/h[center dot]ft[sup 2][center dot][degree]F (1.14 W/m[sup 2][center dot]K) or less that can act as passive solar elements even on north-facing orientations in cold climates, requires further significant decreases in heat transfer through both the glazing system and the frame/edge. Three-layer glazing systems (those with two low-emissivity coatings and a low-conductivity gas fill) offer center-of-glass U-values as low as 0.10 Btu/h[center dot]ft[sup 2][center dot][degree]F (0.57 W/m[sup 2][center dot]K); such glazings are being manufactured today and can be incorporated into existing or new vinyl frame profiles. This paper focuses on the use of a state-of the-art infrared imaging system and a two-dimensional finite-difference model to improve the thermal performance of commercially available vinyl profiles and glazing edge systems. Such evaluation tools are extremely useful in identifying exactly which components and design features limit heat transfer and which act as thermal short circuits. Such an analysis is not possible with conventional whole-window testing in hot boxes where testing uncertainties with superwindows are often greater than proposed improvements.

Beck, F.A.; Arasteh, D.

1992-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

ENERGY BUDGETS AND MASONRY HOUSES: A PRELIMINARY ANALYSIS OF THE COMPARATIVE ENERGY PERFORMANCE OF MASONRY AND WOOD-FRAME HOUSES  

E-Print Network (OSTI)

ENERGY PERFORMANCE OF MASONRY AND WOOD-FRAME HOUSES David B.PERFORMANCE OF MASONRY AND WOOD-FRAME HOUSES David B. Goldsfor those studies used wood- frame construction, The energy

Goldstein, David B.

2012-01-01T23:59:59.000Z

222

Development and Performance of Bechtel Nevada's Nine-Frame Camera System  

Science Conference Proceedings (OSTI)

Bechtel Nevada, Los Alamos Operations, has developed a high-speed, nine-frame camera system that records a sequence from a changing or dynamic scene. The system incorporates an electrostatic image tube with custom gating and deflection electrodes. The framing tube is shuttered with high-speed gating electronics, yielding frame rates of up to 5MHz. Dynamic scenes are lens-coupled to the camera, which contains a single photocathode gated on and off to control each exposure time. Deflection plates and drive electronics move the frames to different locations on the framing tube output. A single charge-coupled device (CCD) camera then records the phosphor image of all nine frames. This paper discusses setup techniques to optimize system performance. It examines two alternate philosophies for system configuration and respective performance results. We also present performance metrics for system evaluation, experimental results, and applications to four-frame cameras.

S. A. Baker; M. J. Griffith; J. L. Tybo

2002-07-01T23:59:59.000Z

223

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization surveys Characterization surveys An ORISE technicians performs a characterization survey The Oak Ridge Institute for Science and Education (ORISE) performs independent, objective characterization surveys to define the extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide guidance to determine the best remediation procedures and are a cost-effective method of ensuring a site meets preliminary regulatory standards. ORISE designs characterization surveys using the data quality objectives process. This approach focuses on the particular objective of characterization, and ensures that only the data needed to address the characterization decisions are collected. Data collection efforts are

224

Design and implementation of a supercomputer frame buffer system  

SciTech Connect

A 512 by 512 pixel by 8 bits per pixel frame buffer has been designed, constructed, and installed on a 48 Mbit/s I/O channel of a Cray X-MP 4/16 supercomputer. This project was undertaken to test whether such a system would be useful and, if so, how it would be used. Supporting software provides the ability to convert vector graphics description files into raster format, to show raster movies interactively, and to show vector files by real-time conversion from vector to raster formats. We have shown that real-time animations in an interactive supercomputer environment are feasible and useful with this system. 6 refs., 3 figs.

Fowler, J.D. Jr.; McGowen, M.

1988-01-01T23:59:59.000Z

225

Electromagnetic Forces and Fields in a Rotating Reference Frame  

E-Print Network (OSTI)

Maxwell’s equations and the equations governing charged particle dynamics are presented for a rotating coordinate system with the global time coordinate of an observer on the rotational axis. Special care is taken in defining the relevant entities in these equations. Ambiguities in the definitions of the electromagnetic fields are pointed out, and in fact are shown to be essential in such a system of coordinates. The Lorentz force is found to have an extra term in this frame, which has its origins in relativistic mass. A related term in the energy equation, which allows inertia to be gained even during strict corotation, suggests ways existing pulsar magnetosphere models may be modified to match observed ‘braking indices ’ more closely. Subject headings: magnetic fields — relativity — pulsars: general – 3 –

Paul N. Arendt

1998-01-01T23:59:59.000Z

226

Condensation analysis for plate-frame heat exchangers  

SciTech Connect

A theoretical analysis is presented to predict single component and binary-mixture condensation in plate-frame heat exchangers. A thermodynamic property model based on the Peng-Robinson equation of state was developed for the binary-mixture equilibrium and formulated into a performance prediction program. A set of equations was formulated and a calculation algorithm was developed to predict the local rate of heat and mass transfer for binary mixtures. Friction-factor and heat-transfer-coefficient correlations were developed using experimental data obtained with ammonia condensation. The role of the mass-transfer resistance associated with the condensation process were analyzed for a propane/butane mixture using two limiting cases: (1) no liquid-phase mass-transfer resistance, and (2) infinite liquid-phase mass-transfer resistance. The results show that the vapor-phase mass-transfer resistance is the controlling mechanism for binary-mixture condensation.

Arman, B.; Rabas, T.J.

1995-07-01T23:59:59.000Z

227

REPORT OF SURVEY OF OAK RIDGE ISOTOPE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OAK RIDGE ISOTOPE OAK RIDGE ISOTOPE ENRICHMENT (CALUTRON) FACILITY BUILDING 9204-3 U.S. Department of Energy Office of Environmental Management & Office of Nuclear Energy Report of Survey of Oak Ridge Isotope Enrichment (Calutron) Facility Building 9204-3 FINAL May 8, 2000 Contents 1. Introduction 1.1 Purpose 1.2 Facility Description 1.3 Organization Representatives 1.4 Survey Participants 2. Summary, Conclusions & Recommendations 2.1 Transfer Considerations 2.2 Post-Transfer EM Path Forward & Management Risk 3. Survey Results 4. Stabilization and Other Actions Required for Transfer 5. Surveillance & Maintenance After Transfer 6. Other Transfer Details 7. Attachments and References Appendix A - Detailed Survey Notes

228

INFRASTRUCTURE SURVEY 2011  

E-Print Network (OSTI)

10 Appendices Appendix 1. Glossary of Terminology and Definitions 11 Appendix 2. Survey Definitions. There is a Glossary of Terminology and Definitions (Appendix 1). The survey form is Appendix 3 of this Report

229

Survey of Climate Data Mining  

E-Print Network (OSTI)

Global climate change has been a discussion topic for years, finally culminating as a significant problem and a national defense issue according to the 2010 Quadrennial Defense Review. From weather to ecological data, the planet is continuously being monitored by researchers collecting spatio-temporal climate data. With the immense amount of data collected, the challenge is making sense of the data by building models and studying the climatic events that deviate and correlate to the models. Data mining is now being used for this research and has four related problems: preprocessing data, applying data mining techniques to build models and outlier/anomaly detection, evaluation techniques and methods, and data visualization. This survey paper will present a broad survey of these issues by first discussing preprocessing techniques to remove variation and other data quality issues, including a discussion on the two types of outliers: undesirable outliers and outliers that represent interesting climate events. Next this paper will discuss common data mining techniques for building models, including association analysis, clustering, and ICA, and discovering interesting outlier/anomalies using techniques including classification, clustering, and wavelet analysis. Third, evaluation techniques will be covered through descriptions and examples. Finally, issues and techniques for climate data visualization will be discussed including

Jason W. Powell

2010-01-01T23:59:59.000Z

230

Survey of Hydrogenase Activity in Algae: Final Report  

DOE Green Energy (OSTI)

The capacity for hydrogen gas production was examined in nearly 100 strains of Eukaryotic algae. Each strain was assessed for rate of H2 production in darkness, at compensating light intensity and at saturating Tight intensity. Maximum H2 yield on illumination and sensitivity to molecular oxygen were also measured.

Brand, J. J.

1982-04-01T23:59:59.000Z

231

Project Chariot - Final Report, Archaeological Survey and Excavations...  

Office of Legacy Management (LM)

Only critical information was scanned. Entire document is available upon request Please e-mail lm.records@lm.doe.gov to...

232

Source category survey: mineral wool manufacturing industry. Final report  

SciTech Connect

This report contains background information which was used for determining the need for new source performance standards (NSPS) for the mineral wool manufacturing industry in accordance with Section 111 of the Clean Air Act. Air pollution emissions and growth trends of the mineral wool industry are examined. Manufacturing processes, control strategies, and state and local air pollution regulations are discussed. The impact of a potential NSPS on particulate and carbon monoxide emissions is calculated.

Not Available

1980-06-01T23:59:59.000Z

233

State-of-the-Art Highly Insulating Window Frames - Research and Market Review  

DOE Green Energy (OSTI)

This document reports the findings of a market and research review related to state-of-the-art highly insulating window frames. The market review focuses on window frames that satisfy the Passivhaus requirements (window U-value less or equal to 0.8 W/m{sup 2}K ), while other examples are also given in order to show the variety of materials and solutions that may be used for constructing window frames with a low thermal transmittance (U-value). The market search shows that several combinations of materials are used in order to obtain window frames with a low U-value. The most common insulating material seems to be Polyurethane (PUR), which is used together with most of the common structural materials such as wood, aluminum, and PVC. The frame research review also shows examples of window frames developed in order to increase the energy efficiency of the frames and the glazings which the frames are to be used together with. The authors find that two main tracks are used in searching for better solutions. The first one is to minimize the heat losses through the frame itself. The result is that conductive materials are replaced by highly thermal insulating materials and air cavities. The other option is to reduce the window frame area to a minimum, which is done by focusing on the net energy gain by the entire window (frame, spacer and glazing). Literature shows that a window with a higher U-value may give a net energy gain to a building that is higher than a window with a smaller U-value. The net energy gain is calculated by subtracting the transmission losses through the window from the solar energy passing through the windows. The net energy gain depends on frame versus glazing area, solar factor, solar irradiance, calculation period and U-value. The frame research review also discusses heat transfer modeling issues related to window frames. Thermal performance increasing measures, surface modeling, and frame cavity modeling are among the topics discussed. The review shows that the current knowledge gives the basis for improving the calculation procedures in the calculation standards. At the same time it is room for improvement within some areas, e.g. to fully understand the natural convection effects inside irregular vertical frame cavities (jambs) and ventilated frame cavities.

Gustavsen, Arild; Jelle, Bjorn Petter; Arasteh, Dariush; Kohler, Christian

2007-01-01T23:59:59.000Z

234

Environmental Survey preliminary report  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

Not Available

1988-04-01T23:59:59.000Z

235

Building America Top Innovations 2013 Profile Â… Next Generation Advanced Framing  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

It's well known that advanced framing techniques that reduce the amount of It's well known that advanced framing techniques that reduce the amount of framing in the stud-framed walls improve the thermal performance of walls by allowing more room for insulation and reducing thermal bridging-the heat transfer that happens through wood framing that extends from the inside surface to the outside surface of the wall. Unfortunately even though the benefits are known, builders have been slow to adopt advanced framing methods because some of the techniques are difficult to apply, trades are not familiar with these nonstandard techniques, and implementation can require design and materials changes. One Building America team, the Partnership for Home Innovation (PHI) led by the Home Innovation Research Labs (formerly known as the National

236

Building America Top Innovations 2013 Profile Â… Next Generation Advanced Framing  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

It is well known that advanced framing techniques that reduce the amount of It is well known that advanced framing techniques that reduce the amount of framing in stud-framed walls improve the thermal performance of the walls by allowing more room for insulation and reducing thermal bridging-the heat transfer that happens through wood framing that extends from the inside surface to the outside surface of the wall. Unfortunately, even though the benefits are known, builders have been slow to adopt advanced framing methods because some of the techniques are difficult to apply, trades are not familiar with these nonstandard techniques, and implementation can require design and materials changes. One Building America team, the Partnership for Home Innovation (PHI) led by the Home Innovation Research Labs (formerly known as the National

237

Infrared Surveys for AGN  

E-Print Network (OSTI)

From the earliest extragalactic infrared studies AGN have shown themselves to be strong infrared sources and IR surveys have revealed new populations of AGN. I briefly review current motivations for AGN surveys in the infrared and results from previous IR surveys. The Luminous Infrared Galaxies, which in some cases house dust-enshrouded AGN, submillimeter surveys, and recent studies of the cosmic x-ray and infrared backgrounds suggest that there is a population of highly-obscured AGN at high redshift. ISO Surveys have begun to resolve the infrared background and may have detected this obscured AGN population. New infrared surveys, particularly the SIRTF Wide-area Infrared Extragalactic Legacy Survey (SWIRE), will detect this population and provide a platform for understanding the evolution of AGN, Starbursts and passively evolving galaxies in the context of large-scale structure and environment.

Smith, H E

2002-01-01T23:59:59.000Z

238

Infrared Surveys for AGN  

E-Print Network (OSTI)

From the earliest extragalactic infrared studies AGN have shown themselves to be strong infrared sources and IR surveys have revealed new populations of AGN. I briefly review current motivations for AGN surveys in the infrared and results from previous IR surveys. The Luminous Infrared Galaxies, which in some cases house dust-enshrouded AGN, submillimeter surveys, and recent studies of the cosmic x-ray and infrared backgrounds suggest that there is a population of highly-obscured AGN at high redshift. ISO Surveys have begun to resolve the infrared background and may have detected this obscured AGN population. New infrared surveys, particularly the SIRTF Wide-area Infrared Extragalactic Legacy Survey (SWIRE), will detect this population and provide a platform for understanding the evolution of AGN, Starbursts and passively evolving galaxies in the context of large-scale structure and environment.

Harding E. Smith

2002-03-06T23:59:59.000Z

239

External Insulation of Masonry Walls and Wood Framed Walls  

Science Conference Proceedings (OSTI)

The use of exterior insulation on a building is an accepted and effective means to increase the overall thermal resistance of the assembly that also has other advantages of improved water management and often increased air tightness of building assemblies. For thin layers of insulation (1" to 1 1/2"), the cladding can typically be attached directly through the insulation back to the structure. For thicker insulation layers, furring strips have been added as a cladding attachment location. This approach has been used in the past on numerous Building America test homes and communities (both new and retrofit applications), and has been proven to be an effective and durable means to provide cladding attachment. However, the lack of engineering data has been a problem for many designers, contractors, and code officials. This research project developed baseline engineering analysis to support the installation of thick layers of exterior insulation on existing masonry and frame walls. Furthermore, water management details necessary to integrate windows, doors, decks, balconies and roofs were created to provide guidance on the integration of exterior insulation strategies with other enclosure elements.

Baker, P.

2013-01-01T23:59:59.000Z

240

INDEPENDENT VERIFICATION SURVEY OF THE HIGH FLUX BEAM REACTOR DECOMMISSIONING PROJECT OUTSIDE AREAS BROOKHAVEN NATIONAL LABORATORY UPTON, NEW YORK  

SciTech Connect

5098-SR-03-0 FINAL REPORT- INDEPENDENT VERIFICATION SURVEY OF THE HIGH FLUX BEAM REACTOR DECOMMISSIONING PROJECT OUTSIDE AREAS, BROOKHAVEN NATIONAL LABORATORY

P.C. Weaver

2010-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Citizenship Porn within the Frame: Visualizing Techniques, Cyberspace, and the Production of “Undocumented”  

E-Print Network (OSTI)

Citizenship Porn within the Frame: Visualizing Techniques,pornographic fantasy that I call “citizenship porn”. Let mewhat I mean by “citizenship porn”; I will then raise several

Moran, Erin

2007-01-01T23:59:59.000Z

242

State-of-the-Art Highly Insulating Window Frames - Research and Market Review  

E-Print Network (OSTI)

and spacer effects on window U-value. ASHRAE Transactions,Residential Zero Energy Windows, ASHRAE Transactions, Vol.for low-conductivity window frames, Solar Energy Materials

Gustavsen, Arild

2008-01-01T23:59:59.000Z

243

Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools  

E-Print Network (OSTI)

and spacer effects on window U- value. ASHRAE Transactions,Enermodal. (2001). Modelling Windows, Glass Doors and OtherA. (2001). Heat transfer in window frames with internal

Gustavsen, Arild

2009-01-01T23:59:59.000Z

244

The Effect of Green Insulation Standards on Moisture Accumulation within Framing of Residential Structures.  

E-Print Network (OSTI)

??Green building standards recommend use of a variety of new thermal insulation products. However, durability of wooden framing used in conjunction with new insulation materials… (more)

Knight, Kevin Brian

2012-01-01T23:59:59.000Z

245

COT"IPREITENS IVE RADIOLOGICAL SURVEY OFF-SITE PROPERTY P NIAGARA FALIS STORAGE SITE  

Office of Legacy Management (LM)

COT"IPREITENS IVE RADIOLOGICAL COT"IPREITENS IVE RADIOLOGICAL SURVEY OFF-SITE PROPERTY P NIAGARA FALIS STORAGE SITE LEWISTON, NEW YORK Prepared for U.S. DePartment of EnergY as part of the Formerly Utilized Sites - Remedial ActLon Program J . D . B e r g e r P r o j e c t S t a f f J. Burden* w.L. Smlth* R.D. Condra T.J. Sowell J.S . Epler* G.M. S tePhens P.Iil. Frame L.B. Taus* W . 0 . H e l t o n C . F . W e a v e r R . C . G o s s l e e B . S . Z a c h a r e k d I I Prepared bY Radiological Slte Assessoent Progran Manpower Educailon Research, and Training Dlvision Oak Ridge Assoclated Universlties Oak Ridge, Tennessee 3783f-0117 I FINAL REPORT March 1984 Thts report ls based on work performed under contract number DE-AC05-760R00033 wiLh the DePartment of EnergY. *Evaluatlon Research Corporatlon, Oak Ridge, Tennessee TABLE OF CONTENTS L i s t o f F i g u

246

Price-Responsive Load (PRL) Program - Framing Paper No.1  

SciTech Connect

By definition, effective and efficient competitive markets need a supply side and a demand side. One criticism of electric restructuring efforts in many states is that most of the attention has been focused on the supply side, in a market focused on the short term. In general, the demand side of the market has been under-addressed. The objective of the New England Demand Response Initiative (NEDRI) is to develop a comprehensive, coordinated set of demand response programs for the New England regional power markets. NEDRI aims to maximize the capability of demand response to compete in the wholesale market and to improve the economic efficiency and environmental profile of the electric sector. To those ends, NEDRI is focusing its efforts in four interrelated areas: (1) ISO-level reliability programs, (2) Market-based price-responsive load programs, (3) Demand response at retail through pricing, rate design, and advanced metering, and (4) End-use energy efficiency resources as demand response. The fourth area, energy efficiency, is the subject of this framing paper. Energy efficiency reduces the energy used by specific end-use devices and systems, typically without affecting the level of service and without loss of amenity. Energy savings and peak load reductions are achieved by substituting technically more advanced equipment, processes, or operational strategies to produce the same or an improved level of end-use service with less electricity. In contrast, load management programs lower peak demand during specific, limited time periods by either (1) influencing the timing of energy use by shifting load to another time period, or (2) reducing the level of energy use by curtailing or interrupting the load, typically with some loss of service or amenity.

Goldman, Charles A.

2002-03-01T23:59:59.000Z

247

On the Existence and Utility of Rigid Quasilocal Frames  

E-Print Network (OSTI)

The notion of a rigid quasilocal frame (RQF) provides a geometrically natural way to define a system in general relativity, and a new way to analyze the problem of motion. An RQF is defined as a two-parameter family of timelike worldlines comprising the boundary (topologically R x S^2) of the history of a finite spatial volume, with the rigidity conditions that the congruence of worldlines be expansion- and shear-free. In other words, the size and shape of the system do not change. In previous work, such systems in Minkowski space were shown to admit precisely the same six degrees of freedom of rigid body motion that we are familiar with in Newtonian space-time, without any constraints, circumventing a century-old theorem due to Herglotz and Noether. This is a consequence of the fact that a two-sphere of any shape always admits precisely six conformal Killing vector fields, which generate an action of the Lorentz group on the sphere. Here we review the previous work in flat spacetime and extend it in three directions: (1) Using a Fermi normal coordinates approach, we explicitly construct, to the first few orders in powers of areal radius, the general solution to the RQF rigidity equations in a generic curved spacetime, and show that the resulting RQFs possess exactly the same six motional degrees of freedom as in flat spacetime; (2) We discuss how RQFs provide a natural context in which to understand the flow of energy, momentum and angular momentum into and out of a system; in particular, we derive a simple, exact expression for the flux of gravitational energy (a gravitational analogue of the Poynting vector) in terms of operationally-defined geometrical quantities on the boundary; (3) We use this new gravitational (or "geometrical") energy flux to resolve another apparent paradox, this one involving electromagnetism in flat spacetime, which we discovered in the course of this work.

Richard J. Epp; Robert B. Mann; Paul L. McGrath

2013-07-07T23:59:59.000Z

248

LARES/WEBER-SAT, frame-dragging and fundamental physics  

E-Print Network (OSTI)

After a brief introduction on the scientific objectives of the LARES/WEBER-SAT satellite we present the recent measurement of the Lense-Thirring effect using the nodes of the LAGEOS and LAGEOS 2 satellites and using the Earth gravity model EIGENGRACE02S obtained by the GRACE space mission, we also include some determination of the rate of change of the lowest order Earth's even zonal harmonics. Finally, we describe an interesting possibility of testing the Brane-World unified theory of fundamental interactions by the use of a specially designed LARES/WEBER-SAT satellite.

Ignazio Ciufolini

2004-12-01T23:59:59.000Z

249

Unified Field Theory From Enlarged Transformation Group. The Covariant Derivative for Conservative Coordinate Transformations and Local Frame Transformations  

E-Print Network (OSTI)

Pandres has developed a theory in which the geometrical structure of a real four-dimensional space-time is expressed by a real orthonormal tetrad, and the group of diffeomorphisms is replaced by a larger group called the conservation group. This paper extends the geometrical foundation for Pandres' theory by developing an appropriate covariant derivative which is covariant under all local Lorentz (frame) transformations, including complex Lorentz transformations, as well as conservative transformations. After defining this extended covariant derivative, an appropriate Lagrangian and its resulting field equations are derived. As in Pandres' theory, these field equations result in a stress-energy tensor that has terms which may automatically represent the electroweak field. Finally, the theory is extended to include 2-spinors and 4-spinors.

Edward Lee Green

2009-07-22T23:59:59.000Z

250

Berkeley Lab Postdoc Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Founded in 1983, MOR Associates has led dozens of major survey efforts on behalf of higher education, such as UC Berkeley, MIT, Stanford University, University of Washington,...

251

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide...

252

The Dark Energy Survey  

Science Conference Proceedings (OSTI)

A new proposed optical?near infrared survey of 5000 square degrees of the South Galactic Cap is presented. To perform it

E. Sánchez; Dark Energy Survey Collaboration

2006-01-01T23:59:59.000Z

253

Bayesian inference from photometric redshift surveys  

E-Print Network (OSTI)

We show how to enhance the redshift accuracy of surveys consisting of tracers with highly uncertain positions along the line of sight. Photometric surveys with redshift uncertainty delta_z ~ 0.03 can yield final redshift uncertainties of delta_z_f ~ 0.003 in high density regions. This increased redshift precision is achieved by imposing an isotropy and 2-point correlation prior in a Bayesian analysis and is completely independent of the process that estimates the photometric redshift. As a byproduct, the method also infers the three dimensional density field, essentially super-resolving high density regions in redshift space. Our method fully takes into account the survey mask and selection function. It uses a simplified Poissonian picture of galaxy formation, relating preferred locations of galaxies to regions of higher density in the matter field. The method quantifies the remaining uncertainties in the three dimensional density field and the true radial locations of galaxies by generating samples that are ...

Jasche, Jens

2011-01-01T23:59:59.000Z

254

Single and double frame coding of speech LPC parameters using a lattice-based quantization scheme  

Science Conference Proceedings (OSTI)

A lattice-based scheme for the single-frame and the double-frame quantization of the speech line spectral frequency parameters is proposed. The lattice structure provides a low-complexity vector quantization framework, which is implemented using a trellis ... Keywords: CELP, LPC, LSF, interframe coding, intraframe coding, lattice-based quantization, quantization, speech coding

F. Lahouti; A. R. Fazel; A. H. Safavi-Naeini; A. K. Khandani

2006-09-01T23:59:59.000Z

255

Dynamic Analysis of Reinforced Brick Masonry Infilled RC Frames Using 3D Elements under Seismic Loading  

Science Conference Proceedings (OSTI)

Masonry walls are provided basically for the purpose of partitioning and covering but they impart considerable strength and stiffness to the building frame for resisting loads. The strength and stiffness contribution of infill masonry is generally ignored ... Keywords: Masonry, Infill, Frame, Finite Element Analysis

Ramesh S. Manoli; D. S. Prakash

2008-07-01T23:59:59.000Z

256

MTS Table Top Load frame [Non-Destructive Evaluation (NDE) and Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering> Facilities > Non-Destructive Evaluation Engineering> Facilities > Non-Destructive Evaluation (NDE) and Testing Facilities > MTS Table Top Load frame Non-Destructive Evaluation (NDE) and Testing Facilities Overview MTS Table Top Load Frame X-ray Inspection Systems Other Facilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Non-Destructive Evaluation (NDE) and Testing Facilities MTS Table Top Load frame Bookmark and Share PDF version [167KB] The Non-destructive Evaluation group operates an MTS Table Top Load frame for ultimate strength and life cycle testing of various ceramic, ceramic-matrix (FGI), carbon, carbon fiber, cermet (CMC) and metal alloy engineering samples. The load frame is a servo-hydraulic type designed to function in a closed loop configuration under computer control. The system

257

REMOTE SENSING GEOLOGICAL SURVEY  

E-Print Network (OSTI)

REMOTE SENSING IN GEOLOGICAL SURVEY OF BRAZIL August/2010 Mônica Mazzini Perrotta Remote Sensing Division Head #12;SUMMARY The Geological Survey of Brazil mission The Remote Sensing Division Main remote, Paleontology, Remote Sensing Director of Hydrology and Land Management But Remote Sensing Division gives

258

Utility Baghouse Survey 2009  

Science Conference Proceedings (OSTI)

EPRI conducted comprehensive surveys of utility baghouse installations in 1981, 1991, and 2005 to summarize the state of the technology. The current survey focuses on nine selected pulse-jet baghouses to provide a better understanding of the design, performance, and operation of recent installations.

2009-12-14T23:59:59.000Z

259

Final Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Final Design (FD) Review Module (RM) is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the technical sufficiency of the final design prior to CD-3...

260

NASA Customer Satisfaction Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Satisfaction Survey Customer Satisfaction Survey NASA's Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC) would like to encourage you to participate in the NASA ESDIS 2013 American Customer Satisfaction Survey. The ORNL DAAC is one of twelve data centers sponsored by NASA's Earth Science Data and Information System (ESDIS) project. The ESDIS project uses the results of this survey to evaluate our success and to determine where improvements are needed. Invitations will be sent to you, our users, from CFI Group [CFI Group on behalf of NASA (NASA@jangomail.com)] during the week of August 20, 2013. Each invitation will reference us as "ORNL DAAC / FLUXNET", and contain a unique secure link to this Web-based anonymous survey. We encourage you to participate!

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Building Technologies Residential Survey  

SciTech Connect

Introduction A telephone survey of 1,025 residential occupants was administered in late October for the Building Technologies Program (BT) to gather information on residential occupant attitudes, behaviors, knowledge, and perceptions. The next section, Survey Results, provides an overview of the responses, with major implications and caveats. Additional information is provided in three appendices as follows: - Appendix A -- Summary Response: Provides summary tabular data for the 13 questions that, with subparts, comprise a total of 25 questions. - Appendix B -- Benchmark Data: Provides a benchmark by six categories to the 2001 Residential Energy Consumption Survey administered by EIA. These were ownership, heating fuel, geographic location, race, household size and income. - Appendix C -- Background on Survey Method: Provides the reader with an understanding of the survey process and interpretation of the results.

Secrest, Thomas J.

2005-11-07T23:59:59.000Z

262

NGP Final Report  

Science Conference Proceedings (OSTI)

... suppression in aircraft. The enclosed CD compiles the collected publications from the program. Final Report (NIST SP 1069). ...

2011-12-29T23:59:59.000Z

263

The Large Area Lyman Alpha Survey  

E-Print Network (OSTI)

The Lyman-$\\alpha$ line is expected to be strong in the presence of active star formation and the absence of dust, making it a good tool for finding chemically primitive galaxies in the early universe. We report on a new survey for high redshift Lyman-$\\alpha$ sources, the Large Area Lyman Alpha (LALA) survey. Our survey achieves an unprecedented combination of volume and sensitivity by using narrow-band filters on the new $8192^2$ pixel CCD Mosaic Camera at the 4 meter Mayall telescope of Kitt Peak National Observatory. Well-detected sources with flux and equivalent width matching known high redshift Lyman-$\\alpha$ galaxies have an observed surface density corresponding to $11000 \\pm 700$ per square degree per unit redshift at $z=4.5$. Early spectroscopic followup from the Keck telescope suggests that $\\sim 1/3$ of these are actually at $z\\approx 4.5$, and has confirmed five $z > 4$ Lyman-$\\alpha$ emitters so far. Combining our photometric survey with spectroscopic results, we estimate a net density of $\\sim 4000 $ Lyman-$\\alpha$ emitters per square degree per unit redshift at $z\\approx 4.5$. The star formation rate density (estimated both from UV continuum and from line emission) is comparable to that of the Lyman break galaxy population within present uncertainties. The most extreme Lyman-$\\alpha$ emitters in our sample have rest frame equivalent widths $> 100\\AA$, consistent with the expectations for the first burst of star formation in a primitive, dust-free galaxy.

James E. Rhoads; Sangeeta Malhotra; Arjun Dey; Buell T. Jannuzi; Daniel Stern; Hyron Spinrad

2001-04-18T23:59:59.000Z

264

State-of-the-Art Highly Insulating Window Frames - Research and Market  

NLE Websites -- All DOE Office Websites (Extended Search)

State-of-the-Art Highly Insulating Window Frames - Research and Market State-of-the-Art Highly Insulating Window Frames - Research and Market Review Title State-of-the-Art Highly Insulating Window Frames - Research and Market Review Publication Type Report LBNL Report Number LBNL-1133E Year of Publication 2007 Authors Gustavsen, Arlid, Bjørn Petter Jelle, Dariush K. Arasteh, and Christian Kohler Call Number LBNL-1133E Abstract This document reports the findings of a market and research review related to state-of-the-art highly insulating window frames. The market review focuses on window frames that satisfy the Passivhaus requirements (window U-value less or equal to 0.8 W/m2K), while other examples are also given in order to show the variety of materials and solutions that may be used for constructing window frames with a low thermal transmittance (U-value). The market search shows that several combinations of materials are used in order to obtain window frames with a low U-value. The most common insulating material seems to be Polyurethane (PUR), which is used together with most of the common structural materials such as wood, aluminum, and PVC.

265

FULL ELECTROMAGNETIC FEL SIMULATION VIA THE LORENTZ-BOOSTED FRAME TRANSFORMATION  

SciTech Connect

Numerical electromagnetic simulation of some systems containing charged particles with highly relativistic directed motion can by speeded up by orders of magnitude by choice of the proper Lorentz-boosted frame. A particularly good application for calculation in a boosted frame isthat of short wavelength free-electron lasers (FELs) where a high energy electron beam with small fractional energy spread interacts with a static magnetic undulator. In the optimal boost frame (i.e., the ponderomotive rest frame), the red-shifted FEL radiation and blue-shifted undulator field have identical wavelengths and the number of required longitudinal grid cells and time-steps for fully electromagnetic simulation (relative to the laboratory frame) decrease by factors of gamma^2 each. In theory, boosted frame EM codes permit direct study of FEL problems for which the eikonal approximation for propagation of the radiation field and wiggler-period-averaging for the particle-field interaction may be suspect. We have adapted the WARP code to apply this method to several electromagnetic FEL problems including spontaneous emission, strong exponential gain in a seeded, single pass amplifier configuration, and emission from e-beams in undulators with multiple harmonic components. WARP has a standard relativistic macroparticle mover and a fully 3-D electromagnetic field solver. We discuss our boosted frame results and compare with those obtained using the ?standard? eikonal FEL simulation approach.

Fawley, William; Vay, Jean-Luc

2010-08-16T23:59:59.000Z

266

Chameleonic dilaton, nonequivalent frames, and the cosmological constant problem in quantum string theory  

Science Conference Proceedings (OSTI)

The chameleonic behavior of the string theory dilaton is suggested. Some of the possible consequences of the chameleonic string dilaton are analyzed in detail. In particular, (1) we suggest a new stringy solution to the cosmological constant problem and (2) we point out the nonequivalence of different conformal frames at the quantum level. In order to obtain these results, we start taking into account the (strong coupling) string loop expansion in the string frame (S-frame), therefore the so-called form factors are present in the effective action. The correct dark energy scale is recovered in the Einstein frame (E-frame) without unnatural fine-tunings and this result is robust against all quantum corrections, granted that we assume a proper structure of the S-frame form factors in the strong coupling regime. At this stage, the possibility still exists that a certain amount of fine-tuning may be required to satisfy some phenomenological constraints. Moreover in the E-frame, in our proposal, all the interactions are switched off on cosmological length scales (i.e., the theory is IR-free), while higher derivative gravitational terms might be present locally (on short distances) and it remains to be seen whether these facts clash with phenomenology. A detailed phenomenological analysis is definitely necessary to clarify these points.

Zanzi, Andrea [Via Pioppa 261, 44123 Pontegradella, Ferrara (Italy)

2010-08-15T23:59:59.000Z

267

Solar energy industry survey  

SciTech Connect

This report describes the results of a survey of companies in the solar energy industry. The general objective of the survey was to provide information to help evaluate the effectiveness of technology transfer mechanisms for the development of the solar industry. The specific objectives of the survey included: (1) determination of the needs of the solar industry; (2) identification of special concerns of the solar industry; and (3) determination of the types of technology transfer mechanisms that would be most helpful to the solar industry in addressing these needs and concerns. The major focus was on technical problems and developments, but institutional and marketing considerations were also treated. The majority of the sample was devoted to the solar heating and cooling (SHAC) component of the industry. However, a small number of photovoltaic (PV), wind, and power generation system manufacturers were also surveyed. Part I discusses the methodology used in the selection, performance, and data reduction stages of the survey, comments on the nature of the responses, and describes the conclusions drawn from the survey. The latter include both general conclusions concerning the entire solar industry, and specific conclusions concerning component groups, such as manufacturers, architects, installers, or dealers. Part II consists of tabulated responses and non-attributed verbatim comments that summarize and illustrate the survey results.

1979-08-06T23:59:59.000Z

268

Category theoretic aspects of chain-valued frames: Part I: Categorical and presheaf theoretic foundations  

Science Conference Proceedings (OSTI)

This paper is Part I of a two-part series dealing with category theoretic aspects of chain-valued frames. A new categorical motivation for lattice-valued frames is given from presheaves, and then, under the assumption that L be a complete chain, it is ... Keywords: L-topological spaces, Anti-stratified/stratified spaces, Characteristic/Martin/stratification functors, Cocompleteness, Completeness, Factorization structures, Image/preimage operators, Iota/omega functors, L-Frm, L-Loc, L-Top, L-frames, Spectrum functors, Universal/co-universal spaces, Upper/lower forgetful functors, Upper/lower free functors

A. Pultr; S. E. Rodabaugh

2008-03-01T23:59:59.000Z

269

Generalized survey propagation  

Science Conference Proceedings (OSTI)

Survey propagation (SP) has recently been discovered as an efficient algorithm in solving classes of hard constraint-satisfaction problems (CSP). Powerful as it is, SP is still a heuristic algorithm, and further understanding its algorithmic nature, ...

Ronghui Tu / Yongyi Mao, Jiying Zhao

2011-01-01T23:59:59.000Z

270

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n tal Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope oc:c:urs, Project Lead must submit a new NEPA Compliance Survey and contact the Technical...

271

Site Energy Surveys  

E-Print Network (OSTI)

Operating improvements and selected investments have already improved US refining and petrochemical energy utilization efficiency by about 20%, compared to 1972 operating efficiencies. This is equivalent to saving well over 250,000 B/D of crude; which is equal to the output of several major synthetic fuels projects! Site Energy Surveys can be an important technique for achieving the next major increment (1520%) in energy savings, even when using existing technology. These surveys encompass the total site, all associated plants, and investigate all aspects of energy requirements, heat integration configurations, steam/power cogeneration possibilities and inefficient practices. After potential energy conservation opportunities have been identified, screening is conducted to develop their economic attractiveness. This presentation reviews factors leading to the need for Site Energy Surveys, the objectives for conducting surveys, the approach utilized, considerations given to values of energy and concludes with overall improvements achieved.

Lockett, W., Jr.; Guide, J. J.

1981-01-01T23:59:59.000Z

272

Evaluating Our Instruction: Surveys  

E-Print Network (OSTI)

you put in; and as the grandest mill in the world will not extract wheat flour from peascod, so pagesEvaluating Our Instruction: Surveys Mathematics may be compared to a mill of exquisite workmanship

Maryland at College Park, University of

273

CHARACTERIZATION SURVEY OF THE BAKER AND WILLIAMS WAREHOUSES  

Office of Legacy Management (LM)

CHARACTERIZATION SURVEY CHARACTERIZATION SURVEY OF THE BAKER AND WILLIAMS WAREHOUSES BUILDING 513-519 NEW YORK, NEW YORK Prepared by W. C. Adams Environmental Survey and Site Assessment Program Energy/Environment System Division Oak Ridge Institute for Science and Education Oak Ridge, Tennessee 37831-0117 Prepared for the Office of Environmental Restoration U.S. Department of Energy FINAL REPORT DECEMBER 1993 This report is based on work performed under contract number DE-AC05-760R00033 with the U.S. Department of Energy. .- .- .- CHARACTERIZATION SURVEY OF THE BAKER AND W ILLIAMS WAREHOUSES BUILDING 513419 NEW YORK, NEW YORK Prepared by: Date: W . C. Adams, Project Leader i L!J!?J Environmental Survey and Site Assessment Program Reviewed by: W . L. Beck, Acting Laboratory Manager

274

Environmental Survey preliminary report, Y-12 Plant, Oak Ridge, Tennessee  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the Department of Energy (DOE), Y-12 Plant, conducted November 10 through 21 and December 9 through 11, 1986. This Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Y-12 Plant. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at Y-12, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the Y-12 Plant Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Y-12 Plant Survey. 80 refs., 76 figs., 61 tabs.

Not Available

1987-11-01T23:59:59.000Z

275

Environmental Survey preliminary report, Rocky Flats Plant, Golden, Colorado  

SciTech Connect

This report presents the preliminary findings of the Environmental Survey of the United States Department of Energy (DOE), Rocky Flats Plant (RFP), conducted August 11 through 22, 1986. The Survey is being conducted by an multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the RFP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data observations of the operations carried on at RFP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activates. The Sampling and Analysis Plan is being executed by DOE's Oak Ridge National Laboratory. When completed, the results will be incorporated into the RFP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the RFP Survey. 75 refs., 24 figs., 33 tabs.

Not Available

1987-06-01T23:59:59.000Z

276

Environmental Survey preliminary report, Hanford Site, Richland, Washington  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Hanford Site, conducted August 18 through September 5, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Hanford Site. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Hanford Site, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the Hanford Site. The Interim Report will reflect the final determinations of the Hanford Site Survey. 44 refs., 88 figs., 74 tabs.

Not Available

1987-08-01T23:59:59.000Z

277

Environmental Survey preliminary report, Hanford Site, Richland, Washington  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Hanford Site, conducted August 18 through September 5, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Hanford Site. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Hanford Site, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the Hanford Site. The Interim Report will reflect the final determinations of the Hanford Site Survey. 44 refs., 88 figs., 74 tabs.

1987-08-01T23:59:59.000Z

278

Environmental Survey preliminary report, Pantex Facility, Amarillo, Texas  

Science Conference Proceedings (OSTI)

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Pantex Facility, conducted November 3 through 14, 1986.The Survey is being conducted by an interdisciplinary team of environmental specialist, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Pantex Facility. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Pantex Facility, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory. When completed, the results will be incorporated into the Pantex Facility Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the Pantex Facility. 65 refs., 44 figs., 27 tabs.

Not Available

1987-09-01T23:59:59.000Z

279

Environmental Survey preliminary report, Feed Materials Production Center, Fernald, Ohio  

Science Conference Proceedings (OSTI)

This report presents the preliminary findings from the first phase of the environmental survey of the United States Department of Energy (DOE) Feed Materials Production Center (FMPC), conducted June 16 through 27, 1986. The survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with the FMPC. The survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the survey involves the review of existing site environmental data, observations of the operations carried on at FMPC, and interviews with site personnel. The survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its onsite activities. The Sampling and Analysis Plan will be executed by a DOE national laboratory or a support contractor. When completed, the results will be incorporated into the FMPC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the FMPC survey. 41 refs., 20 figs., 25 tabs.

Not Available

1987-03-01T23:59:59.000Z

280

Environmental Survey preliminary report, Stanford Linear Accelerator Center, Stanford, California  

SciTech Connect

This report presents the preliminary findings from the first phase of the Survey of the US Department of Energy (DOE) Stanford Linear Accelerator Center (SLAC) at Stanford, California, conducted February 29 through March 4, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the SLAC. The Survey covers all environmental media and all areas of environmental regulation and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the SLAC, and interviews with site personnel. The Survey team is developing a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the SLAC facility. The Interim Report will reflect the final determinations of the SLAC Survey. 95 refs., 25 figs., 25 tabs.

Not Available

1988-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Environmental Survey preliminary report, Brookhaven National Laboratory, Upton, New York  

Science Conference Proceedings (OSTI)

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Brookhaven National Laboratory (BNL) conducted April 6 through 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with BNL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at BNL, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Oak Ridge National Laboratory. When completed, the results will be incorporated into the BNL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the BNL Survey. 80 refs., 24 figs., 48 tabs.

Not Available

1988-06-01T23:59:59.000Z

282

Environmental Survey preliminary report, Nevada Test Site, Mercury, Nevada  

Science Conference Proceedings (OSTI)

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Nevada Test Site (NTS), conducted June 22 through July 10, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the NTS. The Survey covers all environment media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations and activities performed at the NTS, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by the Battelle Columbus Division under contract with DOE. When completed, the results will be incorporated into the NTS Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the NTS Survey. 165 refs., 42 figs., 52 tabs.

Not Available

1988-04-01T23:59:59.000Z

283

Building America Top Innovations Hall of Fame Profile Â… Advanced Framing Systems and Packages  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

studies involving studies involving thousands of homes have documented significant material, labor, and energy savings when production builders implement advanced framing techniques. Advanced framing can reduce the number of studs in the walls by up to one-third, reducing the cost of materials. and reducing the cost of labor in terms of the time it takes to handle, cut, install, drill, and attach to studs. Actual savings have exceeded $1,000 per home. Studies show the resulting improvement in thermal performance can yield 13% energy savings. BUILDING AMERICA TOP INNOVATIONS HALL OF FAME PROFILE INNOVATIONS CATEGORY: 1. Advanced Technologies and Practices 1.1 Building Science Solutions Advanced Framing Systems and Packages Building America has developed best practices for advanced framing

284

What’s the Issue? Changing Frames of Ethanol Policy in Congress and the Media  

E-Print Network (OSTI)

gas prices in the summer months, when they tend to be highest. This trendgas prices since this time was not mirrored in energy frame use. Figure 18 shows this trend

Weiner, Sarah

2012-01-01T23:59:59.000Z

285

Visualizing Spacetime Curvature via Frame-Drag Vortexes and Tidal Tendexes II. Stationary Black Holes  

E-Print Network (OSTI)

When one splits spacetime into space plus time, the Weyl curvature tensor (which equals the Riemann tensor in vacuum) splits into two spatial, symmetric, traceless tensors: the tidal field $E$, which produces tidal forces, and the frame-drag field $B$, which produces differential frame dragging. In recent papers, we and colleagues have introduced ways to visualize these two fields: tidal tendex lines (integral curves of the three eigenvector fields of $E$) and their tendicities (eigenvalues of these eigenvector fields); and the corresponding entities for the frame-drag field: frame-drag vortex lines and their vorticities. These entities fully characterize the vacuum Riemann tensor. In this paper, we compute and depict the tendex and vortex lines, and their tendicities and vorticities, outside the horizons of stationary (Schwarzschild and Kerr) black holes; and we introduce and depict the black holes' horizon tendicity and vorticity (the normal-normal components of $E$ and $B$ on the horizon). For Schwarzschil...

Zhang, Fan; Nichols, David A; Chen, Yanbei; Lovelace, Geoffrey; Matthews, Keith D; Owen, Robert; Thorne, Kip S

2012-01-01T23:59:59.000Z

286

Thermal properties of structural details in wood frame homes : analysis and recommendations  

E-Print Network (OSTI)

The wood platform frame home is the dominant design in the United States when it comes to single family housing. Introduced during the mid-nineteenth century, the scheme is a cheap, fast, and proven design that takes ...

Graybeal, Alexander Kung

2010-01-01T23:59:59.000Z

287

Errors in Fixed and Moving Frame of References: Applications for Conventional and Doppler Radar Analysis  

Science Conference Proceedings (OSTI)

Procedures for the estimation and correction of advection effects with single and multiple conventional and Doppler radars are developed. In the case of scalars or Cartesian vectors, the essence of the method is finding a moving frame of ...

Tzvi Gal-Chen

1982-10-01T23:59:59.000Z

288

Examining the Variability of Wind Power Output in the Regulation Time Frame: Preprint  

DOE Green Energy (OSTI)

This work examines the distribution of changes in wind power for different time scales in the regulation time frame as well as the correlation of changes in power output for individual wind turbines in a wind plant.

Hodge, B. M.; Shedd, S.; Florita, A.

2012-08-01T23:59:59.000Z

289

Investigation of manufacturing techniques and prototyping of the Smartcities Citycar frame  

E-Print Network (OSTI)

A study was performed to analyze different methods of manufacturing a full scale car frame for the Smart Cities Citycar, a folding electric vehicle being designed at the MIT Media Lab, as well as a half-scale prototype for ...

Rogers, Arin S

2011-01-01T23:59:59.000Z

290

Laser wakefield simulation using a speed-of-light frame envelope model  

E-Print Network (OSTI)

Laser wake?eld simulation using a speed-of-light frameAbstract. Simulation of laser wake?eld accelerator (LWFA)extend hundreds of laser wave- lengths transversely and many

Cowan, B.

2010-01-01T23:59:59.000Z

291

Key Elements of and Materials Performance Targets for Highly Insulating Window Frames  

E-Print Network (OSTI)

D. Curcija. 2006. THERM 5.2 / WINDOW 5.2, NFRC SimulationSashlite 2011. The Shashlite window website http://2010. Development of a slim window frame made of glass fibre

Gustavsen, Arild

2012-01-01T23:59:59.000Z

292

Experimental and Numerical Examination of the Thermal Transmittance of High Performance Window Frames  

E-Print Network (OSTI)

windows are often called passive -house wind ows, as windowse window frames, like passive-house windows. In this p aperare supposed to satisfy the Passive house requirements of

Gustavsen Ph.D., Arild

2010-01-01T23:59:59.000Z

293

Uniform-type structures on lattice-valued spaces and frames  

Science Conference Proceedings (OSTI)

By introducing lattice-valued covers of a set, we present a general framework for uniform structures on very general L-valued spaces (for L an integral commutative quantale). By showing, via an intermediate L-valued structure of uniformity, how filters ... Keywords: L-valued space, Axiality, Cover, Entourage, Frame, Galois connection, Girard quantale, Integral commutative quantale, L-valued frame, Locale, Polarity, Quantale, Uniform operator, Uniformity

Javier Gutiérrez García; Iraide Mardones-Pérez; Jorge Picado; María Angeles de Prada Vicente

2008-10-01T23:59:59.000Z

294

Key Elements of and Materials Performance Targets for Highly Insulating Window Frames  

DOE Green Energy (OSTI)

The thermal performance of windows is important for energy efficient buildings. Windows typically account for about 30-50 percent of the transmission losses though the building envelope, even if their area fraction of the envelope is far less. The reason for this can be found by comparing the thermal transmittance (U-factor) of windows to the U-factor of their opaque counterparts (wall, roof and floor constructions). In well insulated buildings the U-factor of walls, roofs an floors can be between 0.1-0.2 W/(m2K). The best windows have U-values of about 0.7-1.0. It is therefore obvious that the U-factor of windows needs to be reduced, even though looking at the whole energy balance for windows (i.e. solar gains minus transmission losses) makes the picture more complex.In high performance windows the frame design and material use is of utmost importance, as the frame performance is usually the limiting factor for reducing the total window U-factor further. This paper describes simulation studies analyzing the effects on frame and edge-of-glass U-factors of different surface emissivities as well as frame material and spacer conductivities. The goal of this work is to define materials research targets for window frame components that will result in better frame thermal performance than is exhibited by the best products available on the market today.

Gustavsen, Arild; Grynning, Steinar; Arasteh, Dariush; Jelle, Bjorn Petter; Goudey, Howdy

2011-03-28T23:59:59.000Z

295

An efficient compound-element for potential progressive collapse analysis of steel frames with semi-rigid connections  

Science Conference Proceedings (OSTI)

In this paper, the formulation of a novel 1D frame compound-element for the materially and geometrically non-linear analysis of steel frames with flexible connections is outlined. The element is formulated based on the force interpolation concept and ... Keywords: Alternate load path, Force-based method, Non-linear analysis, Semi-rigid connection, Steel frame, Total secant formulation

Hamid R. Valipour; Mark Bradford

2012-11-01T23:59:59.000Z

296

Final_Report.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

United States Department of Energy, Offi ce of Fossil Energy. Ormat: Low-Temperature Geothermal Power Generation Naval Petroleum Reserve No. 3, Teapot Dome Field, Wyoming Final...

297

Final Report.PDF  

NLE Websites -- All DOE Office Websites (Extended Search)

Selection and Treatment of Stripper Gas Wells for Production Enhancement, Mocane-Laverne Field, Oklahoma Final Report October, 2000 - September 30, 2003 Scott Reeves Advanced...

298

NETL Final Report Outline  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluation of Active and Passive Gas Imagers for Transmission Pipeline Remote Leak Detection Final Report December 2002 Submitted by Thomas A. Reichardt, Sanjay Devdas, and Thomas...

299

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

0 Appliances in Homes in South Region, Divisions, and States, 2009" " Million Housing Units, Final" ,,"South Census Region" ,,,"South Atlantic Census Division",,,,,,"East South...

300

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

8 Home Appliances in Homes in Northeast Region, Divisions, and States, 2009" " Million Housing Units, Final" ,,"Northeast Census Region" ,,,"New England Census Division",,,"Middle...

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Confirmatory Survey for the Partial Site Release at the ABB Inc. CE Winsor Site, Windsor, CT  

Science Conference Proceedings (OSTI)

The objectives of the confirmatory surveys were to confirm that remedial actions had been effective in meeting established release criteria and that documentation accurately and adequately describes the final radiological conditions of the PSR Impacted Areas.

W.C. Adams

2008-06-27T23:59:59.000Z

302

EA-1447: Final Environmental Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

447: Final Environmental Assessment 447: Final Environmental Assessment EA-1447: Final Environmental Assessment Proposed Consolidation of Certain Dynamic Experimentation Activities at the Two-Mile Mesa Complex Los Alamos National Laboratory, Los Alamos, New Mexico The Proposed Action is to construct and operate offices, laboratories, and shops within the Two- Mile Mesa Complex, located at TA-22, TA-6, and TA-40, where work would be consolidated from other locations at LANL. The Proposed Action would also remove or demolish certain vacated structures that are no longer needed. The Proposed Action includes constructing 15 to 25 new structures over a 10-year time frame to replace about 59 structures currently used for DX operations. The NNSA must make a decision whether to consolidate and construct new facilities for the Dynamic Experimentation

303

EM_GroundwaterSurveyRport_formatted.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

81006 81006 WILLOWSTICK TECHNOLOGIES LLC.: ELECTROMAGNETIC GROUNDWATER SURVEY: A demonstration of an Electromagnetic Groundwater Survey to Identify Flowpaths of Injected Water in the Shannon Sandstone, Naval Petroleum Reserve No. 3, Teapot Dome Field, Wyoming Final Report for the Period of July 26 - November 1, 2005 Date Completed: May 19, 2006 By Brian Black Prepared for the United States Department of Energy Office of Fossil Energy Work performed under Rocky Mountain Oilfield Testing Center (RMOTC) CRADA 2005-060 This document may contain protected CRADA information produced under CRADA no. 2005-060 and is not to be further disclosed for a period of 5 years from the date it was produced except as expressly provided for in the CRADA

304

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Range Management Survey Date: Range Management Survey Date: 12/6/10 DOE Code: 6730.020.0000 Contractor 8067-788 Code: Project Lead: I Anthony Bowler Project Overview We will use a backhoe to get samples for our range management survey. At each site. one or 1. Brief project descnptlon [include anything that two holes will be excavated, and the samples will be taken from 0-1' and 1-2' deep. After could 1mpad the environment] excavating and the samples taken. the remaining soli Will be replaced and tamped back into 2. Legal location place. 3. Duratfon of tile project See attached NPR-3 Maps for preliminary locations : N~ area well 6-A-2\ NVV SW Section 21 . 4. Major equipment to be used f Township 39N, Range 78E) Middle area well 48-1 -Sh (SE SW 34 Township 39N, Range 4 WU-LSIT£5

305

Operations Improvement Surveys  

E-Print Network (OSTI)

Exxon Chemical Company developed unique site-wide energy optimization technology in the mid1970's. This technology was applied by means of site energy surveys which were carried out at every major Exxon facility throughout the world during the 1976-1981 timeframe. The first 20% of energy savings, versus the 1972 reference, had already been captured or was in progress via conventional energy conservation methods. The site energy surveys identified attractive investments to save a second 20% of energy use. In early 1982, Exxon Corp. started to apply this same technology to its major facilities to define attractive NO INVESTMENT and LOW INVESTMENT operational improvement savings which could be implemented quickly. This presentation covers Exxon's approach to site energy optimization and the Operations Improvement Survey Program. The Program has identified at many sites, an average of 5% reduction in today's energy costs at No/Low investment plus additional savings in the feedstock and energy supply areas.

Guide, J. J.; O'Brien, W. J.

1984-01-01T23:59:59.000Z

306

AERIAL RADIOLOGICAL SURVEYS  

SciTech Connect

Measuring terrestrial gamma radiation from airborne platforms has proved to be a useful method for characterizing radiation levels over large areas. Over 300 aerial radiological surveys have been carried out over the past 25 years including U.S. Department of Energy (DOE) sites, commercial nuclear power plants, Formerly Utilized Sites Remedial Action Program/Uranium Mine Tailing Remedial Action Program (FUSRAP/UMTRAP) sites, nuclear weapons test sites, contaminated industrial areas, and nuclear accident sites. This paper describes the aerial measurement technology currently in use by the Remote Sensing Laboratory (RSL) for routine environmental surveys and emergency response activities. Equipment, data-collection and -analysis methods, and examples of survey results are described.

Proctor, A.E.

1997-06-09T23:59:59.000Z

307

Design of a 16T Nb{sub3}Sn Twin Bore Accelerator Dipole with a Window-frame Conductor Layout  

E-Print Network (OSTI)

Accelerator Dipole with a Window-Frame Conductor Layout*Accelerator Dipole with a Window-frame Conductor Layout, J.Nb3Sn Twin Dipole with a Window-Frame Conductor Layout J.M.

van Oort, J.M.

2011-01-01T23:59:59.000Z

308

Environmental Survey preliminary report, Lawrence Livermore National Laboratory, Livermore, California  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the Department of Energy (DOE) Lawrence Livermore National Laboratory (LLNL), conducted December 1 through 19, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with LLNL. The Survey covers all environmental media all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at LLNL, and interviews with site personnel. A Sampling and Analysis Plan was developed to assist in further assessing certain of the environmental problems identified during performance of on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory. When completed, the results will be incorporated into the LLNL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the LLNL Survey. 70 refs., 58 figs., 52 tabs.,

Not Available

1987-12-01T23:59:59.000Z

309

Environmental Survey preliminary report, Portsmouth Uranium Enrichment Complex, Piketon, Ohio  

Science Conference Proceedings (OSTI)

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Portsmouth Uranium Enrichment Complex (PUEC), conducted August 4 through August 15, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team specialists are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at PUEC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Argonne National Laboratory. When completed, the results will be incorporated into the PUEC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the PUEC Survey. 55 refs., 22 figs., 21 tabs.

Not Available

1987-08-01T23:59:59.000Z

310

Independent Confirmatory Survey Summary and Results for the Plum Brook Reactor Facility Sandusky OH  

SciTech Connect

The objectives of the confirmatory survey activities were to provide independent contractor field data reviews and to generate independent radiological data for use by the Nuclear Regulatory Commission (NRC) in evaluating the adequacy and accuracy of the licensee’s procedures and final status survey (FSS) results.

E.N. Bailey

2008-05-06T23:59:59.000Z

311

Oklahoma seismic network. Final report  

SciTech Connect

The US Nuclear Regulatory Commission has established rigorous guidelines that must be adhered to before a permit to construct a nuclear-power plant is granted to an applicant. Local as well as regional seismicity and structural relationships play an integral role in the final design criteria for nuclear power plants. The existing historical record of seismicity is inadequate in a number of areas of the Midcontinent region because of the lack of instrumentation and (or) the sensitivity of the instruments deployed to monitor earthquake events. The Nemaha Uplift/Midcontinent Geophysical Anomaly is one of five principal areas east of the Rocky Mountain front that has a moderately high seismic-risk classification. The Nemaha uplift, which is common to the states of Oklahoma, Kansas, and Nebraska, is approximately 415 miles long and 12-14 miles wide. The Midcontinent Geophysical Anomaly extends southward from Minnesota across Iowa and the southeastern corner of Nebraska and probably terminates in central Kansas. A number of moderate-sized earthquakes--magnitude 5 or greater--have occurred along or west of the Nemaha uplift. The Oklahoma Geological Survey, in cooperation with the geological surveys of Kansas, Nebraska, and Iowa, conducted a 5-year investigation of the seismicity and tectonic relationships of the Nemaha uplift and associated geologic features in the Midcontinent. This investigation was intended to provide data to be used to design nuclear-power plants. However, the information is also being used to design better large-scale structures, such as dams and high-use buildings, and to provide the necessary data to evaluate earthquake-insurance rates in the Midcontinent.

Luza, K.V.; Lawson, J.E. Jr. [Oklahoma Geological Survey, Norman, OK (United States)]|[Univ. of Oklahoma, Norman, OK (United States). Energy Center

1993-07-01T23:59:59.000Z

312

Thermal Impact of Fasteners in High-Performance Wood-Framed Walls: Preprint  

SciTech Connect

Buildings are heavy consumers of energy, and residential building design is rapidly addressing topics to maximize energy conservation en route to net-zero energy consumption. Annual energy analysis of a building informs the choice among disparate energy measures, for cost, durability, occupant comfort, and whole-house energy use. Physics-based and empirical models of elements of a building are used in such analyses. High-performance wood-framed walls enable builders to construct homes that use much less than 40% of the energy consumed by similar homes built to minimum code. Modeling for these walls has considered physical features such as framing factor, insulation and framing properties, roughness and convective effects, and air leakage. The thermal effects of fasteners used to construct these walls have not been fully evaluated, even though their thermal conductivity is orders of magnitudes higher than that of other building materials. Drywall screws and siding nails are considered in this finite element thermal conductivity analysis of wall sections that represent wood-framed walls that are often used in high-performance homes. Nails and screws reduce even the best walls' insulating performance by approximately 3% and become increasingly significant as the framing factor increases.

Christensen, D.

2011-01-01T23:59:59.000Z

313

Thermal Impact of Fasteners in High-Performance Wood-Framed Walls: Preprint  

SciTech Connect

Buildings are heavy consumers of energy, and residential building design is rapidly addressing topics to maximize energy conservation en route to net-zero energy consumption. Annual energy analysis of a building informs the choice among disparate energy measures, for cost, durability, occupant comfort, and whole-house energy use. Physics-based and empirical models of elements of a building are used in such analyses. High-performance wood-framed walls enable builders to construct homes that use much less than 40% of the energy consumed by similar homes built to minimum code. Modeling for these walls has considered physical features such as framing factor, insulation and framing properties, roughness and convective effects, and air leakage. The thermal effects of fasteners used to construct these walls have not been fully evaluated, even though their thermal conductivity is orders of magnitudes higher than that of other building materials. Drywall screws and siding nails are considered in this finite element thermal conductivity analysis of wall sections that represent wood-framed walls that are often used in high-performance homes. Nails and screws reduce even the best walls' insulating performance by approximately 3% and become increasingly significant as the framing factor increases.

Christensen, D.

2011-01-01T23:59:59.000Z

314

Analytical Modeling of Wood Frame Shear Walls Subjected to Vertical Load  

E-Print Network (OSTI)

A nonlinear automated parameter fitted analytical model that numerically predicts the load-displacement response of wood frame shear walls subjected to static monotonic loading with and without vertical load is presented. This analytical model referred to as Analytical Model of wood frame SHEar walls subjected to Vertical load (AMSHEV) is based on the kinematic behavior of wood frame shear walls and captures significant characteristics observed from experimental testing through appropriate modeling of three failure mechanisms that can occur within a shear wall under static monotonic load: 1) failure of sheathing-to-framing connectors, 2) failure of vertical studs, and 3) uplift of end studs from bottom sill. Previous models have not accounted for these failure mechanisms as well as the inclusion of vertical load, which has shown to reveal beneficial effects such as increasing the ultimate load capacity and limiting uplift of the wall as noted in experimental tests. Results from the proposed numerical model capture these effects within 7% error of experimental test data even when different magnitudes of vertical load are applied to predict the ultimate load capacity of wood frame shear walls.

Nguyendinh, Hai

2011-05-01T23:59:59.000Z

315

Wireless sensor network survey  

Science Conference Proceedings (OSTI)

A wireless sensor network (WSN) has important applications such as remote environmental monitoring and target tracking. This has been enabled by the availability, particularly in recent years, of sensors that are smaller, cheaper, and intelligent. These ... Keywords: Protocols, Sensor network deployment, Sensor network services, Survey, Wireless sensor network

Jennifer Yick; Biswanath Mukherjee; Dipak Ghosal

2008-08-01T23:59:59.000Z

316

FINAL ENVIRONMENTAL ASSESSMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 2013 January 2013 FINAL ENVIRONMENTAL ASSESSMENT for the GREEN ENERGY SCHOOL WIND PROJECT SAIPAN, COMMONWEALTH OF THE NORTHERN MARIANA ISLANDS U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Golden Field Office JANUARY 2013 DOE/EA-1923 iv January 2013 FINAL ENVIRONMENTAL ASSESSMENT for the GREEN ENERGY SCHOOL WIND PROJECT SAIPAN, COMMONWEALTH OF THE NORTHERN MARIANA ISLANDS U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Golden Field Office January 2013 DOE/EA-1923 v January 2013 COVER SHEET RESPONSIBLE AGENCY: U.S. Department of Energy TITLE: Final Environmental Assessment for the Green Energy School Wind Project (DOE/EA-1923) CONTACT: For additional copies or more information on this final Environmental Assessment (EA),

317

CFC Charity Fair Finale  

Energy.gov (U.S. Department of Energy (DOE))

Finish out the 2012 CFC with the Charity Fair Finale! Buy cookies, participate in a putt-putt golf game, eat some popcorn, and meet and talk with CFC charity representatives.

318

Microsoft Word - Final Rule  

NLE Websites -- All DOE Office Websites (Extended Search)

10 CFR, part 835 Docket No. HS-RM-09-835 RIN 1992-AA-45 Occupational Radiation Protection AGENCY: Office of Health, Safety and Security Department of Energy ACTION: Final Rule...

319

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

5 Appliances in U.S. Homes, by Household Income, 2009" " Million Housing Units, Final" ,,"Household Income" ,"Total U.S.1 (millions)",,,"Below Poverty Line2" ,,"Less than...

320

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

3 Appliances in U.S. Homes, by Year of Construction, 2009" " Million Housing Units, Final" ,,"Year of Construction" ,"Total U.S.1 (millions)" ,,"Before 1940","1940 to 1949","1950...

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

" Million Housing Units, Final...  

U.S. Energy Information Administration (EIA) Indexed Site

6 Appliances in U.S. Homes, by Climate Region, 2009" " Million Housing Units, Final" ,,"Climate Region2" ,"Total U.S.1 (millions)" ,,"Very Cold","Mixed- Humid","Mixed-Dry"...

322

Final Beamline Design Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Final Beamline Design Report Final Beamline Design Report Guidelines and Review Criteria (SCD 1.20.95) 6.0 Final Beamline Design Report (FDR) Overview The Final Beamline Design Report is part of the Advanced Photon Source (APS) beamline review process and should be planned for when approximately 90% of the total beamline design has been completed. Fifteen copies of the FDR are to be submitted to the APS Users Office. Approval of the Collaborative Access Team's (CAT) designs described in the report is required prior to installation of beamline components in the APS Experiment Hall. Components that have a long lead time for design or procurement can be reviewed separately from the remainder of the beamline, but enough information must be provided so that the reviewer can understand the

323

U-212: RSA Authentication Manager Flaws Permit Cross-Site and Cross-Frame  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: RSA Authentication Manager Flaws Permit Cross-Site and 2: RSA Authentication Manager Flaws Permit Cross-Site and Cross-Frame Scripting and URL Redirection Attacks U-212: RSA Authentication Manager Flaws Permit Cross-Site and Cross-Frame Scripting and URL Redirection Attacks July 13, 2012 - 7:00am Addthis PROBLEM: RSA Authentication Manager Flaws Permit Cross-Site and Cross-Frame Scripting and URL Redirection Attacks PLATFORM: RSA Authentication Manager 7.1 is vulnerable; other versions may also be affected. ABSTRACT: RSA Authentication Manager is prone to multiple security vulnerabilities because it fails to properly sanitize user-supplied input. Attackers can exploit these issues to execute arbitrary script or HTML code, steal cookie-based authentication credentials, and conduct phishing attacks. Other attacks may also be possible.

324

Usage of Friction-damped Braced Frames for Seismic Vibration Control  

E-Print Network (OSTI)

This study presents the results of experimental work that examines the functionality of friction-damped braced frames during seismic events. The simplicity and efficacy of this friction device as a means of passive vibration control suggest that it may have notable implications in the field of structural engineering. Little scholarship has been devoted to this issue in recent years, and further research to advance our understanding of its possible implementations is necessary. To measure the functionality of this type of frame, this study first examines and compares virtual models of a building modeling the effect of friction damping versus that same building without such damping. It then corroborates these findings by presenting the results of physical experimentation on a scale model of the building, both with and without damping. The validation of the virtual models by the physical model provides credence to the usage of friction-damped braced frames as a seismic energy dissipating system.

Fink, Brynnan 1992-

2012-05-01T23:59:59.000Z

325

2010 Federal Employee Viewpoint Survey  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Employee Viewpoint Survey Federal Employee Viewpoint Survey Page 1 of 20 ________________________________________________________________________________________________________________________________________________________________________________________________________________ Department of Energy 2010 Federal Employee Viewpoint Survey: Trend Report (2006 and 2008 results have been recalculated to exclude Do Not Know/No Basis to Judge responses) Response Summary Surveys Completed 2010 Governmentwide 263,475 2010 Department of Energy 6,648 2008 Department of Energy 6,093 2006 Department of Energy 7,742 This 2010 Federal Employee Viewpoint Survey Report provides summary results for your department or agency. The results include Positive, Neutral, and Negative response percentages for each survey item. For each of the

326

FACILITY SURVEY & TRANSFER Facility Survey & Transfer Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SURVEY & TRANSFER SURVEY & TRANSFER Facility Survey & Transfer Overview Transfer Activities Checklist Pre-Survey Information Request Survey Report Content Detailed Walkdown Checklist Walkdown Checklist Clipboard Aids S & M Checklist Survey Report Example - Hot Storage Garden Survey Report Example - Tritium System Test Assembly Survey Report Example - Calutron Overview As DOE facilities become excess, many that are radioactively and/or chemically contaminated will become candidate for transfer to DOE-EM for deactivation and decommissioning. Requirements and guidance for such transfers are contained in:  DOE Order 430.1B Chg. 2, REAL PROPERTY & ASSET MANAGEMENT  DOE Guide 430.1-5, TRANSITION IMPLEMENTATION GUIDE The transfer process is illustrated in the Transfer Process figure. The purpose here is to provide examples of methods and

327

VERIFICATION SURVEY OF THE BAKER AND WILLIAMS WAREHOUSES  

Office of Legacy Management (LM)

~ *-,-' .r_~, ~ *-,-' .r_~, VERIFICATION SURVEY OF THE BAKER AND WILLIAMS WAREHOUSES BUILDING 513-519 NEW YORK, NEW YORK Prepared by W. C. Adams Environmental Survey and Site Assessment Program Energy/Environment Systems Division Oak Ridge Institute for Science and Education Oak Ridge, Tennessee 37831-0117 Prepared for the Office of Environmental Restoration U.S. Department of Energy FINAL REPORT JUNE 1994 This report is based on work performed under contract number DE-AC05-760R00033 with the U.S. Department of Energy. Baker arId Wi,,iMI Wsrchouwl-Vcrification June 28, ,994 - ,I I_ ..I .- VERIFICATION SURVEY OF THE BAKER AND W ILLIAMS WAREHOUSES BUILDING 513-519 NEW YORK, NEW YORK Prepared by: ' J .,,,~ ' . W . C. Adams, Project Leader Date: Environmental Survey and Site Assessment Program

328

Oak Ridge Associated VERIFICATION SURVEY Universities OF THE  

Office of Legacy Management (LM)

ORAU 89/K-79 ORAU 89/K-79 Prepared by ERIFICATION Oak Ridge Associated VERIFICATION SURVEY Universities OF THE Drepared of SHIPPINGPORT ATOMIC POWER STATION Facility and Site Decommissioning SHIPPINGPORT, PENNSYLVANIA I Projects U.S. Department R LANDIS ot Energy M. R. LANDIS ot Energy Environmental Survey and Site Assessment Program Energy/Environment Systems Division FINAL REPORT .i~ ~~ . ~NOVEMBER 1989 .Ii_- ORAU 89/K-79 VERIFICATION SURVEY OF THE SHIPPINGPORT ATOMIC POWER STATION SHIPPINGPORT, PENNSYLVANIA Prepared by M. R. Landis Environmental Survey and Site Assessment Program Energy/Environment Systems Division Oak Ridge Associated Universities 3*P~~~ ~~Oak Ridge, Tennessee 37831-0117 U~~~~~~~~1 ~Project Staff S. F. Barnett F. A. Payne J. D. Berger J. L. Payne G. R. Foltz E. A. Powell

329

Kangley - Echo Lake Transmission Line Project, Final Environmental Impact Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

STATEMENT - APPENDICES STATEMENT - APPENDICES Appendices Appendix A Addition to Appendix A, Final Fisheries Technical Report Appendix D Final Wetlands Technical Report Appendix F Geology, Soil, Climate, and Hydrology Technical Report Appendix U Addition to Appendix U, Letter from the National Marine Fisheries Service Appendix Y Drinking Water Regulations Appendix Z Updated EMF Information Appendix AA Letter from the U.S. Fish and Wildlife Service Table of Contents Addition to Appendix A Final Fisheries Technical Report Appendix A. Data and Comments for Streams, Map and Aerial Photo-Based Surveys Appendix A. Table A-1. Data and comments for streams, map and airphoto-based survey. Stream name Number KC Class 1 Description of RMZ Segment Potential Resident

330

Category theoretic aspects of chain-valued frames: Part II: Applications to lattice-valued topology  

Science Conference Proceedings (OSTI)

This paper is Part II of a two-part series dealing with category theoretic aspects of chain-valued frames. Using the categorical properties established for L-Frm in Part I for L a complete chain, this paper constructs ''upper'' free functor L and ''lower'' ... Keywords: Factorization structures, Anti-stratified/stratified spaces, Characteristic/Martin/stratification functors, Cocompleteness, Completeness, Image/preimage operators, Iota/omega functors, L-Frm, L-Loc, L-Top, L-frames, L-topological spaces, Spectrum functors, Universal/co-universal spaces, Upper/lower forgetful functors, Upper/lower free functors

A. Pultr; S. E. Rodabaugh

2008-03-01T23:59:59.000Z

331

Effective Dark Energy Models and Dark Energy Models with Bounce in frames of $F(T)$ Gravity  

E-Print Network (OSTI)

Various cosmological models in frames of $F(T)$ gravity are considered. The general scheme of constructing effective dark energy models with various evolution is presented. It is showed that these models in principle are compatible with $\\Lambda$CDM model. The dynamics of universe governed by $F(T)$ gravity can mimics $\\Lambda$CDM evolution in past but declines from it in a future. We also construct some dark energy models with the "real" (non-effective) equation-of-state parameter $w$ such that $w\\leq-1$. It is showed that in $F(T)$ gravity the Universe filled phantom field not necessarily ends its existence in singularity. There are two possible mechanisms permitting the final singularity. Firstly due to the nonlinear dependence between energy density and $H^{2}$ ($H$ is the Hubble parameter) the universe can expands not so fast as in the general relativity and in fact Little Rip regime take place instead Big Rip. We also considered the models with possible bounce in future. In these models the universe expansion can mimics the dynamics with future singularity but due to bounce in future universe begin contracts.

Artyom V. Astashenok

2013-08-02T23:59:59.000Z

332

2006 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

6 User Survey Results 6 User Survey Results Show All | 1 2 3 4 5 ... 15 | Next » 2006 User Survey Results Table of Contents Survey Results Users are invited to provide overall comments about NERSC: Here are the survey results: Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness Ratings All Usefulness Topics Hardware Resources Software Visualization and Data Analysis HPC Consulting Services and Communications Web Interfaces Training Comments about NERSC Survey Results Many thanks to the 256 users who responded to this year's User Survey. This represents a response rate of about 13 percent of the active NERSC users. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's

333

Sloan digital sky survey  

SciTech Connect

The Sloan Digital Sky Survey will produce a detailed digital photometric map of half the northern sky to about 23 magnitude using a special purpose wide field 2.5 meter telescope. From this map we will select {approximately} 10{sup 6} galaxies and 10{sup 5} quasars, and obtain high resolution spectra using the same telescope. The imaging catalog will contain 10{sup 8} galaxies, a similar number of stars, and 10{sup 6} quasar candidates.

Kent, S.M.; Stoughton, C.; Newberg, H.; Loveday, J.; Petravick, D.; Gurbani, V.; Berman, E.; Sergey, G. [Fermi National Accelerator Lab., Batavia, IL (United States); Lupton, R. [Princeton Univ., NJ (United States)

1994-04-01T23:59:59.000Z

334

Magma Source Location Survey  

DOE Green Energy (OSTI)

A survey of Industry/University geophysicists was conducted to obtain their opinions on the existence of shallow (less than 10 km from surface) magma bodies in the western conterminous United States and methods for locating and defining them. Inputs from 35 individuals were received and are included. Responses were that shallow magma bodies exist and that existing geophysical sensing systems are adequate to locate them.

Hardee, H.C.; Dunn, J.C.; Colp, J.L.

1982-03-01T23:59:59.000Z

335

Survey of solar homeowners  

SciTech Connect

Some key results are presented of a national mail survey of 3800 solar homeowners. The solar owners expressed their perceptions about performance, cost, problem areas, and their own motivations and degree of satisfaction. Various types of residential solar installations are represented, including active and passive water heating, space heating, and wind energy systems. After each question put to the respondents, the breakdown of answers is listed and a brief interpretation of the findings is presented. (LEW)

1981-09-01T23:59:59.000Z

336

Bottom Frame  

NLE Websites -- All DOE Office Websites (Extended Search)

X-ray Absorption Spectroscopy at SSRL X-ray Absorption Spectroscopy at SSRL Welcome to the home page of the Structural Molecular Biology/X-ray Absorption Spectroscopy Group at Stanford Synchrotron Radiation Laboratory. The SMB/XAS group develops methodology and instrumentation, and provides a wide array of equipment, software and services/support for x-ray absorption spectroscopy users at SSRL. Scientific focus is on dilute metalloprotein XAS, microbeam imaging/XAS, low-Z XAS (S and Cl etc.), and polarized single crystal XAS studies, for which specialized facilities are made available. Equipment ranges from advanced solid-state array x-ray fluorescence detector systems, liquid-He cryostats and capillary/ K-B optic micro-XAS instrumentation to wet-laboratory facilities. Software provided by the

337

Definition: Airborne Gravity Survey | Open Energy Information  

Open Energy Info (EERE)

Survey Jump to: navigation, search Dictionary.png Airborne Gravity Survey Airborne gravity gradiometry (AGG) surveys provide information regarding the mass distribution of the...

338

2010 State Laboratory Program Workload Survey  

Science Conference Proceedings (OSTI)

Page 1. 2010 State Laboratory Program Workload Survey 2010 SLP Survey v.1.00 August 17, 2011 Page 2. SLP Survey 2010 - Page 2 of 122 ...

2011-08-24T23:59:59.000Z

339

2002 Manufacturing Energy Consumption Survey - User Needs Survey  

U.S. Energy Information Administration (EIA) Indexed Site

2002 Manufacturing Energy Consumption Survey: User-Needs Survey 2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next “ Energy Consumption Survey” (MECS)! As our valued customer, you are in an important position to tell us what kinds of data are most useful in helping you understand energy consumption in the U.S. manufacturing sector. Below is a short electronic survey with just a few questions. We will stop collecting responses for user feedback on May 17, 2002. This deadline serves to meet our intended release date of April/May 2003 for fielding MECS2002. The MECS is designed to produce estimates of energy consumption and other energy-related activities in manufacturing. The survey also collects information on energy expenditures, average prices, onsite generation of

340

Comparison of Energy Needed to Heat Greenhouses and Insulated Frame Buildings Used in Aquaculture1  

E-Print Network (OSTI)

be as low as $4 to $6 per square foot. Construction costs for wood or metal frame buildings are greater than for the structure can be as low as $1 per square foot, but plastic covered greenhouse structures have structure is easy to construct on almost any site and has a low initial cost. Building material costs

Watson, Craig A.

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Visualizing Spacetime Curvature via Frame-Drag Vortexes and Tidal Tendexes II. Stationary Black Holes  

E-Print Network (OSTI)

When one splits spacetime into space plus time, the Weyl curvature tensor (which equals the Riemann tensor in vacuum) splits into two spatial, symmetric, traceless tensors: the tidal field $E$, which produces tidal forces, and the frame-drag field $B$, which produces differential frame dragging. In recent papers, we and colleagues have introduced ways to visualize these two fields: tidal tendex lines (integral curves of the three eigenvector fields of $E$) and their tendicities (eigenvalues of these eigenvector fields); and the corresponding entities for the frame-drag field: frame-drag vortex lines and their vorticities. These entities fully characterize the vacuum Riemann tensor. In this paper, we compute and depict the tendex and vortex lines, and their tendicities and vorticities, outside the horizons of stationary (Schwarzschild and Kerr) black holes; and we introduce and depict the black holes' horizon tendicity and vorticity (the normal-normal components of $E$ and $B$ on the horizon). For Schwarzschild and Kerr black holes, the horizon tendicity is proportional to the horizon's intrinsic scalar curvature, and the horizon vorticity is proportional to an extrinsic scalar curvature. We show that, for horizon-penetrating time slices, all these entities ($E$, $B$, the tendex lines and vortex lines, the lines' tendicities and vorticities, and the horizon tendicities and vorticities) are affected only weakly by changes of slicing and changes of spatial coordinates, within those slicing and coordinate choices that are commonly used for black holes. [Abstract is abbreviated.

Fan Zhang; Aaron Zimmerman; David A. Nichols; Yanbei Chen; Geoffrey Lovelace; Keith D. Matthews; Robert Owen; Kip S. Thorne

2012-08-15T23:59:59.000Z

342

On the spectral shift and the time delay of light in a Rindler accelerated frame  

E-Print Network (OSTI)

We discuss two effects predicted by the general theory of relativity in the context of Rindler accelerated observers: the gravitational spectral shift and the time delay of light. We show that these effects also appear in a Rindler frame in the absence of gravitational field, in accordance with the Einstein's equivalence principle.

J. B. Formiga; C. Romero

2006-07-02T23:59:59.000Z

343

On enhancing H.264/AVC video rate control by PSNR-based frame complexity estimation  

Science Conference Proceedings (OSTI)

In this paper, we present a PSNR-based frame complexity estimation to improve H.264/AVC rate control. Our scheme is based on adding PSNR-based complexity estimation to the existing mean absolute difference based (MAD-based) complexity measure to form ...

Minqiang Jiang; Nam Ling

2005-02-01T23:59:59.000Z

344

Citrix CCA MetaFrame 1.8 for Windows: Exam 218  

Science Conference Proceedings (OSTI)

From the Book:Welcome toCitrix CCA MetaFrame 1.8 for Windows Exam Cram! Whether this is your first or your fifteenth Exam Cram book, you'll find information here and in Chapter 1 that will help ensure your success as you pursue knowledge, ...

Phil Duffield; Roddy Rodstein

2001-04-01T23:59:59.000Z

345

Real-Space x-ray tomographic reconstruction of randomly oriented objects with sparse data frames  

E-Print Network (OSTI)

Schemes for X-ray imaging single protein molecules using new x-ray sources, like x-ray free electron lasers (XFELs), require processing many frames of data that are obtained by taking temporally short snapshots of identical molecules, each with a random and unknown orientation. Due to the small size of the molecules and short exposure times, average signal levels of much less than 1 photon/pixel/frame are expected, much too low to be processed using standard methods. One approach to process the data is to use statistical methods developed in the EMC algorithm (Loh & Elser, Phys. Rev. E, 2009) which processes the data set as a whole. In this paper we apply this method to a real-space tomographic reconstruction using sparse frames of data (below $10^{-2}$ photons/pixel/frame) obtained by performing x-ray transmission measurements of a low-contrast, randomly-oriented object. This extends the work by Philipp et al. (Optics Express, 2012) to three dimensions and is one step closer to the single molecule recons...

Ayyer, Kartik; Tate, Mark W; Elser, Veit; Gruner, Sol M

2013-01-01T23:59:59.000Z

346

A new moving frame to extract scattering phases in lattice QCD  

Science Conference Proceedings (OSTI)

We present a derivation of the finite-size formulae in a moving frame with total momentum P=(2pi/L)(e_1+e_2). These formulae allow us to calculate the S-wave and P-wave scattering phases at more energies with a fixed lattice size and thus help us to determine the resonance parameters precisely.

Dru Renner,Xu Feng,Karl Jansen

2011-04-01T23:59:59.000Z

347

ENTROPY-BASED VARIABLE FRAME RATE ANALYSIS OF SPEECH SIGNALS AND ITS APPLICATION TO ASR  

E-Print Network (OSTI)

of features without a degradation in acoustic modelling. It also verifies that the technique in [1] improves acoustic modelling in noise and that [1] outperforms the other VFR techniques in recogni- tion experiments achieve a more reliable frame-picking decision based on a longer time span spectral information

Alwan, Abeer

348

Control of Parallel-Connected Bidirectional AC-DC Converters in Stationary Frame for Microgrid  

E-Print Network (OSTI)

Control of Parallel-Connected Bidirectional AC-DC Converters in Stationary Frame for Microgrid-- With the penetration of renewable energy in modern power system, microgrid has become a popular application worldwide. In this paper, parallel-connected bidirectional converters for AC and DC hybrid microgrid application

Teodorescu, Remus

349

final_report.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Final Scientific/Technical Report Final Scientific/Technical Report October 1, 2008 - December 31, 2011 Integrating Natural Gas Hydrates in the Global Carbon Cycle Submitted by: The University of Chicago 5801 S. Ellis Avenue Chicago, IL 60637 Principal Author: David Archer Prepared for: United States Department of Energy National Energy Technology Laboratory April 10, 2012 Office of Fossil Energy 1 Integrating Natural Gas Hydrates in the Global Carbon Cycle Final Scientific/Technical Report submitted by David Archer 1 and Bruce Buffett 2 Submitted 4-10-2012 1 Department of the Geophysical Sciences University of Chicago Chicago IL 60637 2 University of California, Berkeley Earth & Planetary Science 383 McCone Hall Berkeley, CA 94720-5800 Agency Award Number: DE-NT0006558 Award Dates 1/1/08 to 12/31/11

350

A two-point boundary value problem on a Lorentz manifold arising in A. Poltorak's concept of reference frame  

E-Print Network (OSTI)

In A. Poltorak's concept, the reference frame in General Relativity is a certain manifold equipped with a connection. The question under consideration here is whether it is possible to join two events in the space-time by a time-like geodesic if they are joined by a geodesic of the reference frame connection that has a time-like initial vector. This question is interpreted as whether an event belongs to the proper future of another event in the space-time in case it is so in the reference frame. For reference frames of two special types some geometric conditions are found under which the answer is positive.

Yu. E. Gliklikh; P. S. Zykov

2006-10-12T23:59:59.000Z

351

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities  

E-Print Network (OSTI)

the two-dimensional heat transfer through building products.Gustavsen, A. 2001. Heat transfer in window frames withand CFD Simulations of Heat Transfer in Horizontal Window

Gustavsen, Arlid

2008-01-01T23:59:59.000Z

352

2000 Scorebook Sample/Final  

Science Conference Proceedings (OSTI)

... southeast of Albuquerque) houses labs for hospitality; heating, ventilation, and ... students' changing needs, including an annual District Needs Survey ...

2013-06-15T23:59:59.000Z

353

Characterization of nuclear reactor containment penetrations. Final report  

SciTech Connect

This report concludes a preliminary report prepared by ANL for Sandia, published as NUREG/CR-3855, in June 1984. The preliminary report, NUREG/CR-3855, presented the results of a survey of nuclear reactor containment penetrations, covering the number of plants surveyed at that time (22 total). Since that time, an additional 26 plants have been included in the survey. This final report serves two purposes: (1) to add the summary data sheets and penetration details for the additional plants now included in the survey; and (2) to confirm, revise, or add to analyses and discussions presented in the first report which, of course, were based solely on the earlier sample of 22 plants. This final report follows the outline and format of the preliminary survey report. In general, changes and additions to the preliminary report are implied, rather than stated as such to avoid repeated reference to that report. If no changes have been made in a section the title of the section of the previous report is simply repeated followed by ''No Changes''. Some repetition is used for continuity and clarity.

Shackelford, M.H.; Bump, T.R.; Seidensticker, R.W.

1985-02-01T23:59:59.000Z

354

SWERA_Final_Report  

Open Energy Info (EERE)

Ethiopian Rural Energy Development Ethiopian Rural Energy Development and Promotion Center Final Report Country background information Solar and Wind Energy Utilization and Project Development Scenarios October 2007 Ethio Resource Group with Partners i Table of Contents Executive Summary..................................................................................... ii 1 Introduction.........................................................................................................1-1 1.1 Overview.....................................................................................................1-1 1.2 Objective of the study .................................................................................1-1

355

Final Technical Report  

DOE Green Energy (OSTI)

The project, ?Capital Investment to Fund Equipment Purchases and Facility Modifications to Create a Sustainable Future for EnergyXchange? served to replace landfill gas energy with alternative energy resources, primarily solar and wood waste. This is the final project closeout report.

Gilbert, Chris [Altamont Environmental, Inc.] [Altamont Environmental, Inc.

2014-11-13T23:59:59.000Z

356

ENERGY CONSUMPTION SURVEY  

U.S. Energy Information Administration (EIA) Indexed Site

5 RESIDENTIAL TRANSPORTATION 5 RESIDENTIAL TRANSPORTATION ENERGY CONSUMPTION SURVEY Prepared for: UNITED STATES DEPARTMENT OF ENERGY ENERGY INFORMATION ADMINISTRATION OFFICE OF ENERGY MARKETS AND END USE ENERGY END USE DIVISION RESIDENTIAL AND COMMERCIAL BRANCH WASHINGTON, DC 20585 Prepared by: THE ORKAND CORPORATION 8484 GEORGIA AVENUE SILVER SPRING, MD 20910 October 1986 Contract Number DE-AC01-84EI19658 TABLE OF CONTENTS FRONT MATTER Index to Program Descriptions........................................... vi List of Exhibits ....................................................... viii Acronyms and Abbreviations ............................................. ix SECTION 1: GENERAL INFORMATION ........................................ 1-1 1.1. Summary ....................................................... 1-1

357

Laundered protective clothing survey  

SciTech Connect

It is considered appropriate occasionally to make independent checks on the effectiveness of the plant laundry in removing radioactive contamination from plant-issue protective clothing. Previous surveys have offered constructive criticism resulting in improved handling of high level and soft beta contaminated clothing and incorporation in new designs of ventilating and air sampling recommendations. Recurrently the adequacy of laundry reject limits is questioned, and only recently an accurate, special study resulted in relaxed limits for Metal Preparation area clothing. A current question concerns the advisability of determining the reject level on the beta-gamma monitor more frequently than once a day. 2 tabs.

Clukey, H.V.

1952-10-15T23:59:59.000Z

358

The Fall 2004 SDSS Supernova Survey  

E-Print Network (OSTI)

In preparation for the Supernova Survey of the Sloan Digital Sky Survey (SDSS) II, a proposed 3-year extension to the SDSS, we have conducted an early engineering and science run during the fall of 2004, which consisted of approximately 20 scheduled nights of repeated imaging of half of the southern equatorial stripe. Transient supernova-like events were detected in near real-time and photometric measurements were made in the five SDSS filter bandpasses with a cadence of ~2 days. Candidate type Ia supernovae (SNe) were pre-selected based on their colors, light curve shape, and the properties of the host galaxy. Follow-up spectroscopic observations were performed with the Astrophysical Research Consortium 3.5m telescope and the 9.2m Hobby-Eberly Telescope to confirm their types and measure the redshifts. The 2004 campaign resulted in 22 spectroscopically confirmed SNe, which includes 16 type Ia, 5 type II, and 1 type Ib/c. These SN Ia will help fill in the sparsely sampled redshift interval of z = 0.05 - 0.35, the so-called 'redshift desert', in the Hubble diagram. Detailed investigation of the spectral properties of these moderate-redshift SNe Ia will also provide a bridge between local SNe and high-redshift objects, and will help us understand the systematics for future cosmological applications that require high photometric precision. Finally, the large survey volume also provides the opportunity to select unusual supernovae for spectroscopic study that are poorly sampled in other surveys. We report on some of the early results from this program and discuss potential future applications.

Masao Sako; Roger Romani; Josh Frieman; Jen Adelman-McCarthy; Andrew Becker; Fritz DeJongh; Ben Dilday; Juan Estrada; John Hendry; Jon Holtzman; Jared Kaplan; Rick Kessler; Hubert Lampeitl; John Marriner; Gajus Miknaitis; Adam Riess; Douglas Tucker; J. Barentine; R. Blandford; H. Brewington; J. Dembicky; M. Harvanek; S. Hawley; C. Hogan; D. Johnston; S. Kahn; B. Ketzeback; S. Kleinman; J. Krzesinski; D. Lamenti; D. Long; R. McMillan; P. Newman; A. Nitta; R. Nichol; R. Scranton; E. Sheldon; S. Snedden; C. Stoughton; D. York; the SDSS Collaboration

2005-04-20T23:59:59.000Z

359

THE BRIGHTEST OF REIONIZING GALAXIES SURVEY: CONSTRAINTS ON THE BRIGHT END OF THE z {approx} 8 LUMINOSITY FUNCTION  

Science Conference Proceedings (OSTI)

We report the discovery of 33 Lyman-break galaxy candidates at z {approx} 8 detected in Hubble Space Telescope Wide Field Camera 3 (WFC3) imaging as part of the Brightest of Reionizing Galaxies (BoRG) pure-parallel survey. The ongoing BoRG survey currently has the largest area (274 arcmin{sup 2}) with Y {sub 098} (or Y {sub 105}), J {sub 125}, and H {sub 160} band coverage needed to search for z {approx} 8 galaxies, about three times the current CANDELS area, and slightly larger than what will be the final CANDELS wide component with Y {sub 105} data (required to select z {approx} 8 sources). Our sample of 33 relatively bright Y {sub 098}-dropout galaxies have J {sub 125}-band magnitudes between 25.5 and 27.4 mag. This is the largest sample of bright (J {sub 125} {approx}data set with the Hubble Ultra-Deep Field data set, we constrain the rest-frame ultraviolet galaxy luminosity function at z {approx} 8 over the widest dynamic range currently available. The combined data sets are well fitted by a Schechter function, i.e., {phi} (L) = {phi}{sub *} (L/L{sub *}){sup {alpha}} e{sup -(}L{sup /L{sub *})}, without evidence for an excess of sources at the bright end. At 68% confidence, for h = 0.7 we derive {phi}{sub *} = (4.3{sup +3.5} {sub -2.1}) Multiplication-Sign 10{sup -4} Mpc{sup -3}, M {sub *} = -20.26{sup +0.29} {sub -0.34}, and a very steep faint-end slope {alpha} = -1.98{sup +0.23} {sub -0.22}. While the best-fit parameters still have a strong degeneracy, especially between {phi}{sub *} and M {sub *}, our improved coverage at the bright end has reduced the uncertainty of the faint-end power-law slope at z {approx} 8 compared to the best previous determination at {+-}0.4. With a future expansion of the BoRG survey, combined with planned ultradeep WFC3/IR observations, it will be possible to further reduce this uncertainty and clearly demonstrate the steepening of the faint-end slope compared to measurements at lower redshift, thereby confirming the key role played by small galaxies in the reionization of the universe.

Bradley, L. D.; Stiavelli, M.; Pirzkal, N. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Trenti, M. [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom); Oesch, P. A. [UCO/Lick Observatory, University of California, Santa Cruz, CA 95064 (United States); Treu, T. [Department of Physics, University of California, Santa Barbara, CA 93106-9530 (United States); Bouwens, R. J. [Leiden Observatory, Leiden University, NL-2300 RA Leiden (Netherlands); Shull, J. M. [CASA, Department of Astrophysical and Planetary Sciences, University of Colorado, 389-UCB, Boulder, CO 80309 (United States); Holwerda, B. W. [European Space Agency (ESTEC), Keplerlaan 1, NL-2200 AG, Noordwijk (Netherlands)

2012-12-01T23:59:59.000Z

360

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPA COMPLIANCE SURVEY NEPA COMPLIANCE SURVEY # 350 8 Revised 8/2/10 mjt Attachment 1 Written by Dan Smallwood Production Enhancement Project-5 T-2-34 to T-1-33 MIT all wells in this area to determine which are producing wells. There are 15 wells shut in this area because of no tank or shipping line. According to the old test sheet these wells make 24bbls oil and 120bbls of water. Two of these wells have leaks in the flow lines that will be fixed. One is 33-S-34 which could be run to 34-AX-34, about 400' .6 bbl/pd and the other is 35 shx 34 which could be run to 35-AX-34 which is about 200'.5bbl/pd. 42-AX-34 could be ran to 32-AX-34 and then to 33-SX-34 to 34-AX-34. There are two manifolds at T-2-34, one with 10 wells and the other with 12. None of the flow lines have valves or checks in the lines. I propose we flush, disconnect, and plug all wells that

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Project Information Project Title: Survey Centralizer Design Date: 2-10-2010 DOE Code: 6730.020.71091 Contractor Code: 8067-762 Project Lead: Frank Ingham Project Overview 1. What are the environmental No environmental impacts. impacts? Run a logging tool through existing wells at : 2. What is the /ega/location? 67-LBT-3, SW SE sec 3, T38N , R78W 86-1 -X-10 , NE SE Sec 10, T38N , R78W 3. What is the duration of the project? 22-2-X-10H , NW NW Sec 10, T38N , R78W 4. What major equipment will be used if any (work over rig , drilling rig, 4 Days etc.)? Stinger truck or crane . The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

362

CONFIRMATORY SURVEY REPORT FOR THE SECTION 4 AREA AT THE RIO ALGOM AMBROSIA LAKE FACILITY NEW MEXICO  

SciTech Connect

The objectives of the confirmatory survey were to verify that remedial actions were effective in meeting established release criteria and that documentation accurately and adequately described the final radiological conditions of the RAM Ambrosia Lake, Section 4 Areas.

W.C. Adams

2010-02-12T23:59:59.000Z

363

A hybrid-mixed finite element formulation for the geometrically exact analysis of three-dimensional framed structures  

Science Conference Proceedings (OSTI)

This paper addresses the development of a hybrid-mixed finite element formulation for the quasi-static geometrically exact analysis of three-dimensional framed structures with linear elastic behavior. The formulation is based on a modified principle ... Keywords: Complementary energy principle, Geometrically exact analysis, Hybrid-mixed finite elements, One-dimensional beam model, Three-dimensional framed structures

H. A. Santos; P. M. Pimenta; J. P. Almeida

2011-11-01T23:59:59.000Z

364

16000-64000 B pMTU experiments with simulation: The case for super jumbo frames at Supercomputing '05  

Science Conference Proceedings (OSTI)

This paper presents a case study including the results and preliminary simulations for a series of Ethernet-based Xnet ''super jumbo frame'' (SJF) experiments conducted prior to and at Supercomputing '05, for up-to-64000 B path MTU. As far as we are ... Keywords: Maximum transmission unit, Network protocols, Network testing, Networks, Path MTU, Super jumbo frames

W. Rutherford; L. Jorgenson; M. Siegert; P. Van Epp; L. Liu

2007-06-01T23:59:59.000Z

365

Numerical methods for instability mitigation in the modeling of laser wakefield accelerators in a Lorentz-boosted frame  

Science Conference Proceedings (OSTI)

Modeling of laser-plasma wakefield accelerators in an optimal frame of reference [1] has been shown to produce orders of magnitude speed-up of calculations from first principles. Obtaining these speedups required mitigation of a high-frequency instability ... Keywords: Boosted frame, Laser wakefield acceleration, Numerical instability, Particle-in-cell, Plasma simulation, Special relativity

J. -L. Vay; C. G. R. Geddes; E. Cormier-Michel; D. P. Grote

2011-07-01T23:59:59.000Z

366

An Exact Combinatorial Analysis for the Performance Evaluation of Framed Slotted Aloha Systems with Diversity Transmission Over Erasable Wireless Channels  

Science Conference Proceedings (OSTI)

Framed Slotted Aloha (FSA) protocols are widely used in various communication systems. This paper investigates the performance of FSA systems that employ diversity transmission (DT) techniques over erasable wireless channels. Two DT schemes, DT-SWIR ... Keywords: Activity factor, Diversity transmission, Erasable channels, Framed slotted Aloha, Sampling with/without replacement

In-Hang Chung; Ming-Ching Yen

2013-04-01T23:59:59.000Z

367

Environmental Survey preliminary report, Strategic Petroleum Reserve, Texas and Louisiana Gulf Coast  

SciTech Connect

This report presents the preliminary environmental findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Strategic Petroleum Reserve (SPR), located in Louisiana and Texas, and conducted in two segments from November 30 through December 11, 1987, and February 1 through 10, 1988. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with SPR. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involved the review of existing site environmental data, observations of the operations carried on at SPR, and interviews with site personnel. The Survey team has developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Idaho National Engineering Laboratory. When completed, the results will be incorporated into the SPR Survey findings for inclusion into the Environmental Survey Summary Report. The Summary Report will reflect the final determinations of the SPR Survey and the other DOE site-specific Surveys. 200 refs., 50 figs., 30 tabs.

1989-01-01T23:59:59.000Z

368

The inner structure of collisionless magnetic reconnection: The electron-frame dissipation measure and Hall fields  

Science Conference Proceedings (OSTI)

It was recently proposed that the electron-frame dissipation measure, the energy transfer from the electromagnetic field to plasmas in the electron's rest frame, identifies the dissipation region of collisionless magnetic reconnection [Zenitani et al., Phys. Rev. Lett. 106, 195003 (2011)]. The measure is further applied to the electron-scale structures of antiparallel reconnection, by using two-dimensional particle-in-cell simulations. The size of the central dissipation region is controlled by the electron-ion mass ratio, suggesting that electron physics is essential. A narrow electron jet extends along the outflow direction until it reaches an electron shock. The jet region appears to be anti-dissipative. At the shock, electron heating is relevant to a magnetic cavity signature. The results are summarized to a unified picture of the single dissipation region in a Hall magnetic geometry.

Zenitani, Seiji; Hesse, Michael; Klimas, Alex; Black, Carrie; Kuznetsova, Masha [NASA Goddard Space Flight Center, Greenbelt, Maryland 20771 (United States)

2011-12-15T23:59:59.000Z

369

A one-story, slab-on-grad~ steel framed control building approxima  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

one-story, slab-on-grad~ steel framed control building approximately 50 by 120 feet one-story, slab-on-grad~ steel framed control building approximately 50 by 120 feet would be constructed along the eastern portion of the expansion site. The transformer, capacitor banks, and cooling equipment would be supported on about 200 individual concrete spread foundations. Construction of the substation expansion would require approximately six feet of fill over the entire area, or approximately 50-55 thousand cubic yards of fill. Construction of the access road would require approximately 20-25 thousand cubic yards of fill. Concrete footings and foundations would require approximately 1800-2000 cubic yards of concrete. Site grading and foundation work would begin in August, 1992, and continue over a six-month period. During that period, the average number of fill trucks per day would range

370

On a Special Transformation to a Non-Inertial, Radially Rigid Reference Frame  

E-Print Network (OSTI)

We discuss the conditions under which a body, moving non-inertially in Minkowski space, can preserve its size. Under these conditions, using a series expansion of the generalized Lorentz transformation, we ?nd a coor- dinate transformation connecting the laboratory inertial reference frame S and the rigid non-inertial reference frame s which moves without its own rotation with respect to S. Direct consequences of this transformation are: (a) desynchronization, in system s, of the coordinate clocks of s which were previously synchronized in S, and (b) a kinematic contraction of a ruler of system s observed in S. We also consider the dependence of the transfor- mation vector parameter on the proper coordinates of s.

Vitaliy Voytik

2013-08-30T23:59:59.000Z

371

Sage Final EA  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINAL FINAL ENVIRONMENTAL ASSESSMENT Environmental Assessment for DEPARTMENT OF ENERGY LOAN GUARANTEE FOR SAGE ELECTROCHROMICS SAGEGLASS® HIGH VOLUME MANUFACTURING (HVM) FACILITY IN FARIBAULT, MN U.S. Department of Energy Loan Guarantee Program Office Washington, DC 20585 July 2009 DOE/EA-1645 Environmental Assessment for Department of Energy Loan Guarantee for Sage Electrochromics SageGlass® High Volume Manufacturing Facility in Faribault, MN DOE/EA-1645 TABLE OF CONTENTS LIST OF ACRONYMS iii Executive Summary 1 1.0 PURPOSE AND NEED FOR AGENCY ACTION 2 2.0 PROPOSED ACTION AND ALTERNATIVES 2 2.1 Description of Proposed Action 2 2.2 Alternatives Considered but Eliminated 7 2.3 No Action Alternative 8 3.0 AFFECTED ENVIRONMENT AND ENVIRONMENTAL EFFECTS 9

372

Final - Gasbuggy S  

NLE Websites -- All DOE Office Websites (Extended Search)

Gasbuggy S Gasbuggy S i t e Environmental Management End State Vision - January 2005 U.S. DEPARTMENT OF ENERGY Gasbuggy Site ENVIRONMENTAL MANAGEMENT END STATE VISION Final Final - Gasbuggy Site Environmental Management End State Vhion - fanuaty 2005 Executive Summary The Environmental Management End State Vision is to be used as the primary tool for communicating the individual site end state to the involved parties (e.g., U.S. Department of Energy [DOE], regulators, public stakeholders, Tribal Nations). The end state document is not a decisional document. If the DOE decides to seek changes to the current compliance agreements, decisions, or statutoqdregulatory requirements, those changes will be made in accordance with applicable requirements (DOEIEM, 2003).

373

RPSEA Final Report  

NLE Websites -- All DOE Office Websites (Extended Search)

RPSEA RPSEA Final Report 08122-36.Final Produced Water Pretreatment for Water Recovery and Salt Production 08122-36 January 26, 2012 Principal Investigator: James M. Silva Senior Chemical Engineer General Electric Global Research Center 1 Research Circle Niskayuna, NY 12309 ii Legal Notice This report was prepared by General Electric Global Research as an account of work sponsored by the Research Partnership to Secure Energy for America, RPSEA. Neither RPSEA, members of RPSEA, the National Energy Technology Laboratory, the U.S. Department of Energy, nor any person acting on behalf of any of the entities: a. MAKES ANY WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED WITH RESPECT TO ACCURACY, COMPLETENESS, OR USEFULNESS OF THE INFORMATION

374

Final Notice of Violation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8,2011 8,2011 CERTIFIED MAIL RETURN RECEIPT REQUESTED Mr. Jolm J. Grossenbacher Director, Idaho National Laboratory and President, Battelle Energy Alliance, LLC P. O. Box 1625 Idaho Falls, Idaho 83415-3695 SEA-2011-01 Dear Mr. Grossenbacher: Pursuant to section 234B of the Atomic Energy Act of 1954, as amended, (the Act), and the Department of Energy's (DOE) regulations at 10 C.F.R . §§ 824.4(a)(3) and 824.7(b), DOE is issuing this Final Notice of Violation (FNOV) to Battelle Energy Alliance, LLC (BEA) for multiple violations of classified information security requirements. The FNOV is based upon the Office of Health, Safety and Security's Office of Enforcement May 11, 2010, Investigation Report and an evaluation of the evidence presented to DOE by BEA, including BEA's final

375

Final Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Design Review Module Final Design Review Module March 2010 CD-0 [This Rev Design Re O 0 view Module w eview of the OR OFFICE OF C CD-1 was used to dev R U 233 Dispo F ENVIRO Standard R Fin Rev Critical Decis CD-2 M velop the Revie osition Project ONMENTAL Review Plan al Design view Module sion (CD) Ap CD March 2010 ew Plan for 90% in 2009. Lesso Module.] L MANAGE n (SRP) n e pplicability D-3 % Design Revi ons learned hav EMENT CD-4 iew of SWPF i ve been incorpo Post Ope in 2008 and for orated in the R eration r 60% Review Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively.

376

Final Technical Report  

Science Conference Proceedings (OSTI)

The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

Maxwell, Mike, J., P.E.

2012-08-30T23:59:59.000Z

377

2005 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

5 User Survey Results 5 User Survey Results Show All | 1 2 3 4 5 ... 10 | Next » 2005 User Survey Results Table of Contents Response Summary Respondent Demographics All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software Visualization and Data Analysis Services and Communications Web Interfaces Training Comments about NERSC Response Summary Many thanks to the 201 users who responded to this year's User Survey. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. The survey results are listed below.

378

2000 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

0 User Survey Results 0 User Survey Results Show All | 1 2 3 4 5 ... 10 | Next » 2000 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and FY 1999 to FY 2000 Changes Consulting and Account Support Web and Communications Hardware Resources Software Resources Training User Comments Response Summary NERSC extends its thanks to all the users who participated in this year's survey. Your responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. Every year we institute changes based on the survey; the FY 1999 survey resulted in the following changes: We created a long-running queue (12 hours maximum) for jobs using up

379

2002 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

2 User Survey Results 2 User Survey Results Show All | 1 2 3 4 5 ... 11 | Next » 2002 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and Changes from Previous Years Visualization and Grid Computing Web, NIM, and Communications Hardware Resources Software Training User Services Comments about NERSC Response Summary Many thanks to the 300 users who responded to this year's User Survey -- this represents the highest response level in the five years we have conducted the survey. The respondents represent all five DOE Science Offices and a variety of home institutions: see User Information. You can see the FY 2002 User Survey text, in which users rated us on a 7-point satisfaction scale. Some areas were also rated on a 3-point

380

Cosmological dynamics of $f(R)$ gravity scalar degree of freedom in Einstein frame  

E-Print Network (OSTI)

$f(R)$ gravity models belong to an important class of modified gravity models where the late time cosmic accelerated expansion is considered as the manifestation of the large scale modification of the force of gravity. $f(R)$ gravity models can be expressed in terms of a scalar degree of freedom by redefinition of models variable. The conformal transformation of the action from Jordan frame to Einstein frame makes the scalar degree of freedom more explicit and can be studied conveniently. We have investigated the features of the scalar degree of freedoms and the consequent cosmological implications of the power-law ($\\xi R^n$) and the Starobinsky (disappearing cosmological constant) $f(R)$ gravity models numerically in the Einstein frame. Both the models show interesting behaviour of their scalar degree of freedom and could produce the accelerated expansion of the Universe in the Einstein frame with the negative equation of state of the scalar field. However the scalar field potential for the power-law model is the well behaved function of the field, whereas the potential becomes flat for higher value of field in the case of the Starobinsky model. Moreover, the equation of state of the scalar field for the power-law model is always negative and less than -1/3, which corresponds to the behaviour of the dark energy that produces the accelerated expansion of the Universe. This is not always the case for the Starobinsky model. At late times Starobinsky model behaves as cosmological constant $\\Lambda$ as behaves by power-law model for the values of $n\\rightarrow 2$ at all times.

Umananda Dev Goswami; Kabita Deka

2013-03-23T23:59:59.000Z

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Energy efficiency and QoS optimisations of IEEE 802.11 communications using frame aggregation  

Science Conference Proceedings (OSTI)

This paper introduces a new mechanism for IEEE 802.11 infrastructure networks that allows to save energy on battery powered devices by adding some processing on the wireless Access Point (AP). Although the main advantage of this mechanism is ... Keywords: IEEE 80211, MAC, QoS, WLANs, battery powered devices, embedded devices, energy consumption, energy efficiency, frame aggregation, latency, local area networks, medium access control, optimisation, quality of service, wireless LANs, wireless networks

Jean Lorchat; Thomas Noel

2006-02-01T23:59:59.000Z

382

Interpreting the Neutron's Electric Form Factor: Rest Frame Charge Distribution or Foldy Term?  

E-Print Network (OSTI)

The neutron's electric form factor contains vital information on nucleon structure, but its interpretation within many models has been obscured by relativistic effects. I demonstrate that, to leading order in the relativistic expansion of a constituent quark model, the Foldy term cancels exactly against a contribution to the Dirac form factor F_1 to leave intact the naive interpretation of G^n_E as arising from the neutron's rest frame charge distribution.

Nathan Isgur

1998-12-03T23:59:59.000Z

383

Steady-State Thermal Performance Evaluation of Steel-Framed Wall Assembly with Local Foam Insulation  

DOE Green Energy (OSTI)

During January and May, 2009, two configurations of steel-framed walls constructed with conventional 2 4 steel studs insulated with R-19 ~14cm. (5.5-in. thick) and R-13 ~9cm. (3.5-in. thick) fiberglass insulation batts were tested in the Oak Ridge National Laboratory (ORNL) guarded hot-box using ASTM C1363 test procedure. The first test wall used conventional 2 4 steel studs insulated with 2.5-cm. (1-in.) thick foam profiles, called stud snugglers. These stud snugglers converted the 2 4 wall assembly into a 2 6 assembly allowing application of R-19 fiberglass insulation. The second wall tested for comparison was a conventional 2 4 steel stud wall using R-13 insulation batts. Further, numerical simulations were performed in order to evaluate the steady-state thermal performance of various wood- and steel-framed wall assemblies. The effects of adding the stud-snugglers to the wood and steel studs were also investigated numerically. Different combinations of insulation and framing factor were used in the simulations.

Kosny, Jan [ORNL; Biswas, Kaushik [ORNL; Childs, Phillip W [ORNL

2010-01-01T23:59:59.000Z

384

Ultra-high speed burst-mode imager for multi-frame radiography  

SciTech Connect

A 720 x 720 pixel hybrid-CMOS imager was fabricated by Rockwell Scientific (now Teledyne Imaging Sensors). Several cameras have been in operation for 5 years, in a variety of static and dynamic experiments, at the 800MeV proton radiography (pRAD) facility at the LANSCE accelerator. The cameras can operate with a per-pulse adjustable inter-frame time of 250ns to 2s, and with an exposure/integration-time as short as 150 ns. Given the 800 ms total readout time, the imager can be externally synchronized to 0.1-to-5Hz, 50-ns wide proton beam pulses, and record 1000-frame radiographic movies of 5-to-30 minute duration. The effectiveness and dependence of the global electronic shutter on the pixelated Si photo-sensor bias voltage is discussed. The spatial resolution dependence of the full imaging system on various monolithic and structured scintillators is presented. We also present features of a new-generation 10-frame, 1024 x 1024 pixel, 50-ns exposure, 12-bit dynamic range imager, which is now in the design phase.

Kwiatkowski, Kris [Los Alamos National Laboratory; Nedrow, Paul [Los Alamos National Laboratory; Mariam, Fesseha [Los Alamos National Laboratory; Merrill, Frank E [Los Alamos National Laboratory; Morris, Chris L [Los Alamos National Laboratory; Saunders, Abdy [Los Alamos National Laboratory; Hogan, Gary [Los Alamos National Laboratory; Douance, Vincent [TELEDYNE IMAGING SENSORS; Bal, Yibin [TELEDYNE IMAGING SENSORS; Joshi, Atul [TELEDYNE IMAGING SENSORS; Auyeung, John [TELEDYNE IMAGING SENSORS

2010-01-01T23:59:59.000Z

385

RESIDENTIAL ENERGY CONSUMPTION SURVEY 1997  

U.S. Energy Information Administration (EIA)

RESIDENTIAL ENERGY CONSUMPTION SURVEY 1997. OVERVIEW: MOST POPULOUS STATES ... Homes with air-conditioning: 95%... with a central air-conditioning system: 83%

386

2001 Residential Energy Consumption Survey  

U.S. Energy Information Administration (EIA)

Residential Energy Consumption Survey ... Office of Management and Budget, Washington, DC 20503. Form EIA-457A (2001) Form Approval: OMB No. 1905-0092 ...

387

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 Project lnfonnation Project Title: C-EAG. Maintenance I grading of existing roads Date: 8/4/2011 and road drainages (barrow ditches): ex 81.3 DOE Code: Contractor Code: Project Lead: Michael J. Taylor [NCO] Project Overview 1. Brief project description [include C-EA 6. Maintenance I grading of existing roads and road drai nages anything that could impact the (barrow ditches) : ex 81.3 environment] Existing roads defined as per May 2010 Aerial Photos. (Changing out culverts, grading I modifying embankments, etc., that has potential to impact wetlands, requires a NCS.) The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

388

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 Project lnfonnation Project Title: Change out down guy on power pole Date: 2-8-10 DOE Code : Contractor Code: Project Lead: Mike Preston Project Overview 1 What are the environmental No impact to the environment impacts? Power pole east of B-1 -33 2. What is the legal location? 3. What is the duration of the project? 3Hr 4. What major equipment will be used if any (worl< over rig, drilling rig, Backhoe and operator for equ1 pment etc.)? The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE; If ChiingSurvey alld contact Ut TlrCh.,lcal Assunlnce DepartmenL Impacts If YES, then complete below

389

Fermilab Prairie Plant Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Crack the Quadrat* Code! Crack the Quadrat* Code! compass plasnt * What is a Quadrat? It's a one-meter square plot. Plants in the quadrat are identified and counted. Fermilab quadrat specialists can! Attention Citizen Scientists Are you a prairie enthusiast? Learn scientific plant monitoring techniques while enjoying our beautiful prairie. Join a unique science program open to the public, adult groups, families, scouts and more Â…. Become a prairie quadrat specialist and do real science at Fermilab! In the Fermilab Prairie Plant Survey you will learn how to identify prairie plants, map a prairie plot and track restoration progress along with our experts. Use our Website to contribute data you collect. Come once or come back two or three times to see how the prairie changes. Keep an eye on this prairie for years to come!

390

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 Project lnfonnation Project Title: New Drilling Location in Section 29 Date: 12-10-2009 DOE Code: 6730.020.78002 Contractor Code: 8067-371 Project Lead: Mark Duletsky Project Overview The project will involve excavating 3-4 backhoe pits to a depth of about 8 feet to observe soil characteristics 1. What are the environmental impacts? in the vicinity of our planned reserve pit excavation area. 2. What is the legal location? NE 1/4, SE 1/4, Sec. 29. T39N. R78W. Natrona County, Wyoming 3. What is the duration of the project? 4. What major equipment will be used 1 day if any (work over rig, drilling rig, etc.)? Backhoe The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

391

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Project l nfonnation Project Title: Reclamation ofT-2-14 Date: 11/2412009 DOE Code: Contractor Code: Project Lead: Jeff Jones Project Overview We will be removing old piping from the treater@ T-2-14. We will also remove the berm and grade and 1. What are the environmental impacts? reclamate location. The duration of this project will be approx. 2 days. Equipment that will be used is as follows backhoe. dumptruck, blade,and a tiller so we can seed with native grasses. 2. What is the legal location? 3. What is the duration of the project? 4. What major equipment will be used if any (woO< over rig, drilling rig, etc.)? The table below Is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

392

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 0 Project lnfonnation Project Title: Replace electrical line from well to power pole Date: 3/10/2010 DOE Code: Contractor Code: Project Lead: Mike Preston Project Overview No impact to the environment. 1. What are the environmental impacts? Dig up old electrical line from pumping unit on 61-S-34 to power pole east of well , {approximately 75 feet 2. What is the legal location? from unit) and replace with new line. 3. What is the duration of the project? 4. What major equipment will be used 1 day if any (work over rig , drilling rig , etc.)? Electrician, ditch witch and operator for equipment The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

393

SURVEY OF FALLOUT OPERATIONS  

SciTech Connect

A survey was made of fall-out operations in the various countries of the world, These operations are outlined by country. The source of information has largely been the reports submitted to UNSCEAR forwarding data for their consideration. In addition, some material has been received directly in exchange for HASL Quarterlies and other publications of the Laboratory. In many cases, responsible scientists from the country concerned have reviewed the sheets and have made corrections. All of the programs that are shown have been and are subject to modification as time goes on, thus, the data indicate the status of the program as of 1961. No attempt has been made to list re search projects or special fall-out measurements and only programs of a continuing nature have been covered. (auth)

1962-07-01T23:59:59.000Z

394

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Project lnfonnation Project Title: Restoration of 77 -13-SX-3 Date: 2-8-1 0 DOE Code: Contractor Code: Project Lead: Jeff Jones Project Overview We will be restoring 77-SX-3 per procedure. 1. What are the environmental impacts? The duration of this project will be 3-4 days. 2. What is the leg al location? 3. What is the duration of the project? The equipment to be used will be Backhoe, welder, tiller dump truck. 4. What major equipment will be used if any (work over rig , drilling rig , We will take oil contaminated dirt to the Eastside landfarm and backfill with d ean fill dirt from sec. 20. etc.)? The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

395

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Project lnfonnation Project Title: e-EA5. Reclamation of well sites Date: 8/4/2011 DOE Code: Contractor Code: Project Lead: Michael J. Taylor [NCO] Project Overview e-EA 5. Reclamation of wellsites : ex 81.3 and ex 86.1 1. Brief project description [include anything that could impact the Small-scale, short-term cleanup actions including excavation and environment] consolidation of contaminated soils, removal of underground piping, removal of rig anchors or T-bars, drainage control , transport and backfilling of clean soil I fill dirt, and reseeding . The table below is to be completed by the Project Lead and reviewed by the Environmental Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope occurs, Project Lead must submit a new NEPA Compliance Survey and

396

Health and Productivity Questionnaire (HPQ) Survey Report | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Health and Productivity Questionnaire (HPQ) Survey Report Health and Productivity Questionnaire (HPQ) Survey Report Health and Productivity Questionnaire (HPQ) Survey Report Final Report - 2012 The U.S. Department of Energy (DOE) has been concerned about employees' health and well-being for several years, especially as they relate to workplace productivity and safety. Additionally, the DOE's reliance on an aging workforce makes it even more critical for the Department to ensure that its programs and policies support employees, regardless of their age, to perform their jobs safely, while maintaining productivity, overall health, and well-being. The DOE asked researchers from the University of Maryland, School of Social Work (UMSSW) to study the health and productivity of a sample of the DOE workforce. Specific research objectives

397

Multimodal fusion for multimedia analysis: a survey  

E-Print Network (OSTI)

This survey aims at providing multimedia researchers with a state-of-the-art overview of fusion strategies, which are used for combining multiple modalities in order to accomplish various multimedia analysis tasks. The existing literature on multimodal fusion research is presented through several classifications based on the fusion methodology and the level of fusion (feature, decision, and hybrid). The fusion methods are described from the perspective of the basic concept, advantages, weaknesses, and their usage in various analysis tasks as reported in the literature. Moreover, several distinctive issues that influence a multimodal fusion process such as, the use of correlation and independence, confidence level, contextual information, synchronization between different modalities, and the optimal modality selection are also highlighted. Finally, we present the open issues for further research in the area of multimodal fusion.

P. K. Atrey; M. A. Hossain; Abdulmotaleb El Saddik; Mohan S. Kankanhalli

2010-01-01T23:59:59.000Z

398

Heat storage materials. Final report  

DOE Green Energy (OSTI)

The properties of various alloys, eutectics, and salts in respect to their usefulness for latent and sensible heat storage are surveyed and reported. (TFD)

Birchenall, C.E.

1977-12-01T23:59:59.000Z

399

Accumulations Final Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Interrelation of Global Climate and the Response of Oceanic Hydrate Interrelation of Global Climate and the Response of Oceanic Hydrate Accumulations Final Report Date: July 15, 2013 Period: October 1, 2008 - June 30, 2013 NETL Manager: Skip Pratt Principal Investigators: Matthew Reagan (LBNL), Philip W. Jones (LLNL) 1. Goal of this report This report will summarize previously reported or published results concerning the behavior of hydrates subjected to warming, highlighting contributing and mitigating factors relating to the possibility of rapid climate feedbacks. We will thus assess various scenarios and possibilities for the relationship between climate and hydrates: i.e., the likelihood of a "clathrate

400

Final Environmental Assessment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

95 95 :&,, ' - , i . -- Final Environmental Assessment for Device Assembly - Facility Operations f 3: >fi - , - , ' , 7 - . ' ' , , . I 8 ' , :-<:- L , a . ' ' ' -L. -1 , , ~ e m - . - I ! - , - # 8 , r I I , , , - , . .-- - ' - I S - . ! - , - , Y 2 L - . . 8 : L.-- , r Nevada ' f e s t ~ h e , Nye county, Nevada U. S. Department Of Energy - , 8 - - . 8 - I,, ' - 8 - - , , 8 ENVIRONMENTAL ASSESSMENT for DEVICE ASSEMBLY FACIUTY OPERATIONS MAY 1995 TABLE OF CONTENTS LISTOFFIGURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv USTOFTABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv A. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8. PURPOSE AND NEED FOR ACTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 B.1 Purpose and Need for Action . . . . . . . . . . . . . . . .

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Radiological Habits Survey: Bradwell, 2007  

E-Print Network (OSTI)

.2 Comparisons with previous surveys 55 Table A Comparison between 1999 and 2007 aquatic internal exposure 56 3. METHODS FOR DATA ANALYSIS 19 3.1 Data recording 19 3.2 Data analysis 21 4. AQUATIC RADIATION RADIATION PATHWAYS 41 5.1 Terrestrial survey area 41 5.2 Unusual pathways 42 5.3 Retailers 43 5.4 Food

402

Radiological Habits Survey: Wylfa, 2004  

E-Print Network (OSTI)

.7 Internal exposure 28 4.8 External exposure 31 4.9 Water based activities 33 5. TERRESTRIAL RADIATION PATHWAYS 34 5.1 Terrestrial survey area 34 5.2 Wholesalers and retailers 36 5.3 Internal exposure 36 6 analysis 21 4. AQUATIC RADIATION PATHWAYS 23 4.1 Aquatic survey area 23 4.2 Commercial fisheries 25 4

403

Radiological Habits Survey: Winfrith, 2003  

E-Print Network (OSTI)

.7 Internal exposure 26 4.8 External exposure 30 4.9 Water based activities 31 5 TERRESTRIAL RADIATION exposure 37 6 DIRECT RADIATION PATHWAYS 40 6.1 Direct radiation survey area 40 6.2 Residential activities analysis 19 4 AQUATIC RADIATION PATHWAYS 21 4.1 Aquatic survey area 21 4.2 Commercial fisheries 23 4

404

Multidimensional Pattern Matching: A Survey  

E-Print Network (OSTI)

for this survey is the problem of searching aerial photographs. The (ambitious) practical goal of this applicationMultidimensional Pattern Matching: A Survey Amihood Amir \\Lambda GIT--CC--92/29 July 1992 Abstract is that of searching an aerial photograph for all ap­ pearances of some object. The issues we discuss are local errors

Amir, Amihood

405

CONFIRMATORY SURVEY OF THE FUEL OIL TANK AREA HUMBOLDT BAY POWER PLANT EUREKA, CALIFORNIA  

SciTech Connect

During the period of February 14 to 15, 2012, ORISE performed radiological confirmatory survey activities for the former Fuel Oil Tank Area (FOTA) and additional radiological surveys of portions of the Humboldt Bay Power Plant site in Eureka, California. The radiological survey results demonstrate that residual surface soil contamination was not present significantly above background levels within the FOTA. Therefore, it is ORISE’s opinion that the radiological conditions for the FOTA surveyed by ORISE are commensurate with the site release criteria for final status surveys as specified in PG&E’s Characterization Survey Planning Worksheet. In addition, the confirmatory results indicated that the ORISE FOTA survey unit Cs-137 mean concentrations results compared favorably with the PG&E FOTA Cs-137 mean concentration results, as determined by ORISE from the PG&E characterization data. The interlaboratory comparison analyses of the three soil samples analyzed by PG&E’s onsite laboratory and the ORISE laboratory indicated good agreement for the sample results and provided confidence in the PG&E analytical procedures and final status survey soil sample data reporting.

WADE C. ADAMS

2012-04-09T23:59:59.000Z

406

SIM Metrology School FINAL PROGRAM  

Science Conference Proceedings (OSTI)

... Ph – Photometry (M. Nadal, 22/B317) P – Pressure (Doug Olson, 220/B39) SIM Metrology School FINAL PROGRAM TIMETABLE ...

2013-11-19T23:59:59.000Z

407

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

67 67 Project lnfonnation Project Title: Restoration of 63-S-11 Date: 1212112009 DOE Code: Contractor Code: Project Lead: Jeff Jones Project Overview The environmental impacts will be minimal since this is an already disturbed area. The loc. is 63-S-11 . The 1. What are the environmental impacts? duration of this project will be approx. 4 days. We will flush the flowline and cut it off below surface and cap it. We will also do the same with the wellhead and then weld a location marker on it. The final stage will be to Ull 2. What is the legal location? and seed with native foilage.The equipment to be used is as follows backhoe, Blade, Welder. tiller. and 3. What is the duration of the project? seeder. 4. What major equipment will be used if any (work over rig, drilling rig,

408

1999 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

9 User Survey Results 9 User Survey Results Show All | 1 2 3 4 5 ... 11 | Next » 1999 User Survey Results Table of Contents Respondent Summary Overall Satisfaction User Information Visualization Consulting and Account Support Information Technology and Communication Hardware Resources Software Training Comments about NERSC All Satisfaction Questions and FY 1998 to FY 1999 Changes Respondent Summary NERSC would like to thank all the users who participated in this year's survey. Your responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, point us to areas we can improve, and show how we compare to similar facilities. This year 177 users responded to our survey, compared with 138 last year.

409

BOREAS Survey On-Line  

NLE Websites -- All DOE Office Websites (Extended Search)

FF33"> FF33"> BOREAS Survey On-Line To improve the BOREAS and BOREAS Follow-On data sets and to meet users' needs, we are conducting a survey. The BOREAS and BOREAS Follow-On data sets continue to be important products at the ORNL DAAC. To date we have provided over 8,000 data products from these projects to nearly 1,500 users. We invite you to fill out this survey, identifying any problems you had with the data and documentation or any difficulties you experienced in finding and acquiring the data sets. Information you provide will enable us to address problems that need attention. It will also help us determine which aspects of the BOREAS and BOREAS Follow-On information need to be expanded. You can complete the survey at the BOREAS Home Page. After you complete the on-line survey, submit your answers to the ORNL

410

2004 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

4 User Survey Results 4 User Survey Results Show All | 1 2 3 4 5 ... 13 | Next » 2004 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software Security and One Time Passwords Visualization and Data Analysis HPC Consulting Services and Communications Web Interfaces Training Comments about NERSC Response Summary Many thanks to the 209 users who responded to this year's User Survey. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. The

411

Residential Energy Consumption Survey:  

Gasoline and Diesel Fuel Update (EIA)

E/EIA-0262/2 E/EIA-0262/2 Residential Energy Consumption Survey: 1978-1980 Consumption and Expenditures Part II: Regional Data May 1981 U.S. Department of Energy Energy Information Administration Assistant Administrator for Program Development Office of the Consumption Data System Residential and Commercial Data Systems Division -T8-aa * N uojssaooy 'SOS^-m (£03) ao£ 5925 'uofSfAfQ s^onpojj aa^ndmoo - aojAaag T BU T3gN am rcoj? aig^IT^^ '(adBx Q-naugBH) TOO/T8-JQ/30Q 30^703 OQ ' d jo :moaj ajqBfT^A^ 3J^ sjaodaa aAoqe aqa jo 's-TZTOO-eoo-Tgo 'ON ^ois odo 'g^zo-via/aoQ 'TBST Sujpjjng rXaAang uojidmnsuoo XSaaug sSu-ppjprig ON ^oo^s OdO '^/ZOZO-Via/aOQ *086T aunr '6L6I ?sn§ny og aunf ' jo suja^Bd uoj^dmnsuoo :XaAjng uo^^dmnsuoQ XSaaug OS '9$ '6-ieTOO- 00-T90 OdD 'S/ZOZO-Via/aOa C

412

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

. NEPA COMPLIANCE SURVEY Project lnfonnation Project Title: Reclamation of Pits and Boxes Date: Nov. 3, 2010 DOE Code: 6740.010.00000 Contractor Code: 8067-451 Project Lead: Anthony Bowler Project Overview Reclamation of QD.]y the following Pits and Boxes : 1. Brief project description [include 1. B-2-1 0 Skim Box anything that could impact the 2. B-1-14 Skim Box environment 3. Near66-1-STX-14 Pit 2. Legal location 4. T-5-10 Skim Box 3. Duration of the project 5. WDFUpperPit 6. WDFLowerPit 4. Major equipment to be used 7. WDFSkimBox 8. B-1-3 Pit 9. B-1 -3 Skim Box 10. T-2-34 Pit 11 . B-1-10 Pit 12. B-1 -10 Skim Box 13. SE of SG3 & Welding Shop Skim Box 14. 58.Q4-1-SX-3 Skim Box 15. Near Tank 126 Skim Box 16. 77-1-SX-3 NW of Well Pit 17. T-5-3 Pit

413

Final Technical Report  

SciTech Connect

The Georgia Institute of Technology’s Industrial Assessment Center (GT IAC) has a long history working on the IAC program with over 30 years of experience in meeting the IAC program’s goals in a very effective manner since beginning participation in the IAC program’s predecessor, the EADC, in 1977. During the last four year contract period, October 1, 2002 through September 31, 2006, the GT IAC continued this work with the assessments of eighty nine (89) industrial facilities. These assessments resulted in the reported implemented savings of forty eight thousand (48,000,000) kWh of electricity and seven hundred and fifty thousand (750,000) MMBtu of natural gas. The total calculated cost savings from the recommendations implemented was five and a half million dollars ($5,500,000). These savings reoccur annually. However, this cost savings is the total of various recommendations that were calculated during 2002 to 2006. During this time period, energy prices were almost always lower than current energy prices. If you adjust the cost savings number to account for current energy prices, the cost savings would exceed nine million dollars ($9,000,000) reoccurring annually. Beyond the reduction of industrial energy consumption and the cost savings benefit, education has also been an important element of this Center’s work. Primarily this entailed both formal and on the job training of this Center’s student employees. Over the four year time frame, this Center has had fifteen different student employees work for this Center. This Center has also instructed a graduate level senior mechanical engineering class that allowed senior engineering students to conduct IAC assessments under the supervision of IAC staff. This class exposed over one hundred students to industrial energy consumption and energy efficiency. In addition to educating students, the education of plant personnel has also been an important element for this Center. It is believed that this Center has made effective use of IAC program resources by reducing industrial plant energy consumption and cost by helping them become more energy efficient. In turn, this has helped make domestic industry more competitive. This Center has also helped by introducing the next generation of engineers to energy efficiency in the industrial sector.

Meffert, Bill; Soderlund, Matthew, R

2007-10-26T23:59:59.000Z

414

Steel-framed buildings: Impacts of wall detail configurations on the whole wall thermal performance  

SciTech Connect

The main objective of this paper is the influence of architectural wall details on the whole wall thermal performance. Whole wall thermal performance analysis was performed for six light gage steel-framed wall systems (some with wood components). For each wall system, all wall details were simulated using calibrated 3-D finite difference computer modeling. The thermal performance of the six steel-framed wall systems included various system details and the whole wall system thermal performance for a typical single-story ranch house. Currently, predicted heat losses through building walls are typically based on measurements of the wall system clear wall area using test methods such as ASTM C 236 or are calculated by one of the procedures recommended in the ASHRAE Handbook of Fundamentals that often is carried out for the clear wall area exclusively. In this paper, clear wall area is defined as the part of the wall system that is free of thermal anomalies due to building envelope details or thermally unaffected by intersections with other surfaces of the building envelope. Clear wall experiments or calculations normally do not include the effects of building envelope details such as corners, window and door openings, and structural intersections with roofs, floors, ceilings, and other walls. In steel-framed wall systems, these details typically consist of much more structural components than the clear wall. For this situation, the thermal properties measured or calculated for the clear wall area do not adequately represent the total wall system thermal performance. Factors that would impact the ability of today`s standard practice to accurately predict the total wall system thermal performance are the accuracy of the calculation methods, the area of the total wall that is clear wall, and the quantity and thermal performance of the various wall system details.

Kosny, J.; Desjarlais, A.O.; Christian, J.E.

1998-06-01T23:59:59.000Z

415

Final Technical Report  

DOE Green Energy (OSTI)

Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed, which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest/storage/transportation equipment and the processor would build and operate the plant. Pilot fermentation studies demonstrated dramatic improvements in yields and rates with optimization of batch fermentor parameters. Demonstrated yields and rates are approaching those necessary for profitable commercial operation for production of ethanol or lactic acid. The ability of the biocatalyst to adapt to biomass hydrolysate (both biomass sugars and toxins in the hydrolysate) was demonstrated and points towards ultimate successful commercialization of the technology. However, some of this work will need to be repeated and possibly extended to adapt the final selected biocatalyst for the specific commercial hydrolysate composition. The path from corn stover in the farm field to final products, involves a number of steps. Each of these steps has options, problems, and uncertainties; thus creating a very complex multidimensional obstacle to successful commercial development. Through the tasks of this project, the technical and commercial uncertainties of many of these steps have been addressed; thus providing for a clearer understanding of paths forward and commercial viability of a corn stover-based biorefinery.

Aristos Aristidou Natureworks); Robert Kean (NatureWorks); Tom Schechinger (IronHorse Farms, Mat); Stuart Birrell (Iowa State); Jill Euken (Wallace Foundation & Iowa State)

2007-10-01T23:59:59.000Z

416

Proposal: Survey of Climate Data Mining  

E-Print Network (OSTI)

Global climate change has been a discussion topic for years, finally culminating as a significant problem and a national defense issue according to the 2010 Quadrennial Defense Review. From weather to ecological data, the planet is continuously being monitored by researchers to collect spatio-temporal climate data. With the immense amount of data collected, the challenge is making sense of the data by building models and studying the climatic events that deviate and correlate to the models. Data mining is now being used for this research and has four related problems: preprocessing data and applying data mining techniques, outlier and anomaly detection, evaluation techniques and methods, and data visualization. This proposed paper will present a broad survey of these issues by first discussing preprocessing techniques to remove variation and other data integrity issues, including a discussion on the two types of outliers: raw data outliers and outliers that represent interesting climate events. Next this paper will discuss common data mining techniques for building models, including association analysis, clustering, and ICA, and discovering interesting outlier/anomalies using techniques including K-NN classification, K-means clustering, and wavelet analysis. Third, evaluation techniques will be covered through descriptions of some examples and case studies. Finally, issues and techniques of climate data visualization will be discussed including proposed techniques to visualize interesting features while maintaining spatial and temporal aspects. 1

Jason W. Powell

2010-01-01T23:59:59.000Z

417

Reference frame independent quantum key distribution server with telecom tether for on-chip client  

E-Print Network (OSTI)

We demonstrate a client-server quantum key distribution (QKD) scheme, with large resources such as laser and detectors situated at the server-side, which is accessible via telecom-fibre, to a client requiring only an on-chip polarisation rotator, that may be integrated into a handheld device. The detrimental effects of unstable fibre birefringence are overcome by employing the reference frame independent QKD protocol for polarisation qubits in polarisation maintaining fibre, where standard QKD protocols fail, as we show for comparison. This opens the way for quantum enhanced secure communications between companies and members of the general public equipped with handheld mobile devices, via telecom-fibre tethering.

P. Zhang; K. Aungskunsiri; E. Martín-López; J. Wabnig; M. Lobino; R. W. Nock; J. Munns; D. Bonneau; P. Jiang; H. W. Li; A. Laing; J. G. Rarity; A. O. Niskanen; M. G. Thompson; J. L. O'Brien

2013-08-15T23:59:59.000Z

418

Final Environmental Impact Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6E/EIS-0096-F . Ji^ ' 6E/EIS-0096-F . Ji^ ' w V' - > DOE/EIS--00 96-F-Vol.1 //C^ DE84 0 0 1 4 4 6 Final Environmental Impact Statement Remedial Actions at the Former Vitro Rare Metals Plant Site, Canonsburg, Washington County, Pennsylvania United States Department of Energy July 1983 Volume I r NOTICE } IPORTIONS OF THIS REPORT ARE ILLEGIBLE.' / It has been reproduced from the besi ' available copy to permit the broadest possible availability. This document is PUBLICLY RELEASABLl Authorizmg OfFtciai Date: Z P l ^ o " ? isTWBUTim ef T H I S m\jM] IS mm\m DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal

419

NETL Final Report Outline  

NLE Websites -- All DOE Office Websites (Extended Search)

Sensor Evaluation for a Robotic In Line Inspection Vehicle for Sensor Evaluation for a Robotic In Line Inspection Vehicle for Detection of Natural Gas Pipeline Defects and Leaks Final Report February 2003 Submitted by Michael Hassard and Gerald Stoker Advanced Diagnostics and Production Testing Department Sandia National Laboratories P.O. Box 5800, MS 0555 And Mark Vaughn and Bob Bickerstaff Mobile Robotics Department Sandia National Laboratories P.O. Box 5800, MS1125 Albuquerque, NM 87185 This work was sponsored by The Strategic Center for Natural Gas Natural Gas Infrastructure Reliability Program, Natural Energy Technology Laboratory (NETL), DOE Office of Fossil Energy ABSTRACT When examining the condition of a pipeline, In-Line Inspection (ILI) utilizing various Non-Destructive Testing (NDT) methods is an essential tool and a significant factor in establishing a quality management

420

FINAL CEf VED  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOElEA 1147 DOElEA 1147 FINAL CEf VED 6 I 3 I996 ENVIRONMENTAL ASSESSME ~ ~ O S T I for the LOW ENERGY DEMONSTRATION ACCELERATOR TECHNICAL AREA 53 LUS ALAMUS NATFUNAL LABORATORY LOS ALAMOS, NEW MEXICO . . - . - . I Date Prepared: April 1, 1996 ~ Prepared for: Office of Defense Programs US Department of Energy Los Alamos Area Q S c e DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or use- fulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NETL Final Report Outline  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluation of Active and Passive Gas Imagers for Evaluation of Active and Passive Gas Imagers for Transmission Pipeline Remote Leak Detection Final Report December 2002 Submitted by Thomas A. Reichardt, Sanjay Devdas, and Thomas J. Kulp Diagnostics and Remote Sensing Department Sandia National Laboratories P.O. Box 969, MS 9056 Livermore, CA 94551 and Wayne Einfeld Environmental Monitoring and Characterization Department Sandia National Laboratories P.O. Box 5800, MS 0755 Albuquerque, NM 87185 This work was sponsored by The Strategic Center for Natural Gas Natural Gas Infrastructure Reliability Program, National Energy Technology Laboratory (NETL), DOE Office of Fossil Energy 2 Abstract The pipeline industry would benefit considerably from the development of systems that could provide early warning capabilities for major pipeline integrity and safety issues caused by leaks.

422

Final Report.PDF  

NLE Websites -- All DOE Office Websites (Extended Search)

Selection and Treatment of Stripper Gas Wells for Selection and Treatment of Stripper Gas Wells for Production Enhancement, Mocane-Laverne Field, Oklahoma Final Report October, 2000 - September 30, 2003 Scott Reeves Advanced Resources International 9801 Westhemier, Suite 805 Houston, Texas 77042 and Buckley Walsh Oneok Resources 100 West Fifth Street Tulsa, OK 74103-0871 September, 2002 U.S. Department of Energy DE-FG26-00NT40789 i Disclaimers U.S. Department of Energy This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United Sates Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any

423

Final_Report.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

Department of Energy, Offi ce of Fossil Energy Technology International Inc.: Seismic While Drilling Project Naval Petroleum Reserve No. 3, Teapot Dome Field, Wyoming Final Report for the period of June 11-14, 2008 Completed February 2009 This document may contain protected Cooperative Research and Development Agreement (CRADA) information and is not to be further disclosed for a period of 5 years from the date it was produced except as expressly provided for in the CRADA. DISCLAIMER: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors or their employees, makes any warranty, expressed or implied,

424

FINAL/ SCIENTIFIC TECHNICAL REPORT  

DOE Green Energy (OSTI)

The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

McDonald, Henry; Singh, Suminderpal

2006-08-28T23:59:59.000Z

425

Final Progress Report  

SciTech Connect

In this project we have established guidelines for the design on organic chromophores suitable for producing high triplet yields via singlet fission. We have proven their utility by identifying a chromophore of a structural class that had never been examined for singlet fission before, 1,3-diphenylisobenzofuran, and demonstrating in two independent ways that a thin layer of this material produces a triplet yield of 200% within experimental error. We have also designed a second chromophore of a very different type, again of a structural class that had not been examined for singlet fission before, and found that in a thin layer it produces a 70% triplet yield. Finally, we have enhanced the theoretical understanding of the quantum mechanical nature of the singlet fission process.

Josef Michl

2011-10-31T23:59:59.000Z

426

AIPM Final Report  

DOE Green Energy (OSTI)

The final AIPM project report consists of six sections. Each section includes information on the original AIPM project and extension work on the high temperature design. The first section (1) provides an overview of the program and highlights the significant targets to meet at the end of the program. The next section (2) summarizes the significant technical accomplishments by the SEMIKRON AIPM team during the course of the project. Greater technical details are provided in a collection of all the quarterly reports which can be found in the appendix. Section three (3) presents some the more significant technical data collected from technology demonstrators. Section four (4) analyzes the manufacturing cost or economic aspects of producing 100,000 units/yr. Section five (5) describes the commercialization efforts of the AIPM technology into the automotive market. The last section (6) recommends follow on work that will build on the efforts and achievements of the AIPM program.

John Mookken

2006-06-30T23:59:59.000Z

427

NETL Final Report Outline  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrument for Airborne Remote Sensing of Transmission Instrument for Airborne Remote Sensing of Transmission Pipeline Leaks Final Report August 2004 Submitted by Thomas A. Reichardt, Sanjay Devdas, and Thomas J. Kulp Diagnostics and Remote Sensing Department Sandia National Laboratories P.O. Box 969, MS 9056 Livermore, CA 94551 and Wayne Einfeld Environmental Monitoring and Characterization Department Sandia National Laboratories P.O. Box 5800, MS 0755 Albuquerque, NM 87185 This work was sponsored by The Strategic Center for Natural Gas, Natural Gas Infrastructure Reliability Program, National Energy Technology Laboratory (NETL), DOE Office of Fossil Energy Abstract The pipeline industry would benefit considerably from the development of systems that could provide early warning capabilities for major pipeline integrity and safety issues indicated by

428

Clean Fleet Final Report  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

3 3 V e h i c l e M a i n t e n a n c e a n d D u r a b i l i t y FINAL REPORT December 1995 December 1995 December 1995 This information was prepared by Battelle Memorial Institute, Columbus Operations, through sponsor- ship by various companies and associations, the South Coast Air Quality Management District (District), and the California Energy Commission (Commission). Battelle has endeavored to produce a high quality study consistent with its contract commitments. However, because of the research and/or experimental nature of this work, the District or Commission, Battelle, the sponsoring companies and associations, along with the employees, contractors, and subcontractors of each of them, make no warranties, expressed or implied, and they assume no legal liability for the information in this report. The District or

429

Blackout Final Implementation Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report Report on the Implementation of the Task Force Recommendations U.S.-Canada Power System Outage Task Force Natural Resources Canada U.S. Department of Energy September 2006 Final Report on the Implementation of the Task Force Recommendations U.S.-Canada Power System Outage Task Force September 2006 Natural Resources Canada U.S. Department of Energy Acknowledgments This document was prepared by staff of Natural Resources Canada and the U.S. Department of Energy. The principal contributors are listed in Annex 1. The staff wish to acknowledge the contributions of the U.S. Federal Energy Regulatory Commission and the Ontario Ministry of Energy. The staff also wish to acknowl- edge the support and cooperation of the North American Electric Reliability Council and, in particular, of Mr. David Nevius, Senior Vice President and Direc- tor of Reliability Assessment & Performance

430

Clean Fleet Final Report  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

2 2 P r o j e c t D e s i g n a n d I m p l e m e n t a t i o n FINAL REPORT December 1995 December 1995 This information was prepared by Battelle Memorial Institute, Columbus Operations, through sponsorship by various companies and associations, the South Coast Air Quality Management District (District), and the California Energy Commission (Commission). Battelle has endeavored to produce a high quality study consistent with its contract commitments. However, because of the research and/or experimental nature of this work, the District or Commission, Battelle, the sponsoring companies and associations, along with the employees, contractors, and subcontractors of each of them, make no warranties, expressed or implied, and they assume no legal liability for the information in this report.

431

Building Energy Codes Survey Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Codes Program Codes Program Building Energy Codes Survey Tool The following surveys are available: No available surveys Please contact ( webmaster@energycode.pnl.gov ) for further assistance. English Albanian Arabic Basque Belarusian Bosnian Bulgarian Catalan Chinese (Simplified) Chinese (Traditional; Hong Kong) Chinese (Traditional; Taiwan) Croatian Czech Danish Dutch Dutch Informal English Estonian Finnish French Galician German German informal Greek Hebrew Hindi Hungarian Icelandic Indonesian Irish Italian Italian (formal) Japanese Korean Latvian Lithuanian Macedonian Malay Maltese Norwegian (Bokmal) Norwegian (Nynorsk) Persian Polish Portuguese Portuguese (Brazilian) Punjabi Romanian Russian Serbian Sinhala Slovak Slovenian Spanish Spanish (Mexico) Swedish Thai Turkish Urdu Vietnamese Welsh

432

Telluric Survey | Open Energy Information  

Open Energy Info (EERE)

Telluric Survey Telluric Survey Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Telluric Survey Details Activities (3) Areas (3) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Electromagnetic Sounding Techniques Information Provided by Technique Lithology: Rock composition, mineral and clay content Stratigraphic/Structural: Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature Cost Information Low-End Estimate (USD): 522.2252,222 centUSD

433

Nuclear Maintenance Applications Center: Recommended Practice for Evaluating Interchangeability for National Electric Manufacturing Association Frame Motor Replacement  

Science Conference Proceedings (OSTI)

The National Electric Manufacturers Association (NEMA) has a standardized system for designating electric motors. The NEMA system uses a frame size number and letter designation that describes the mounting dimensions, including foot hole mounting pattern, shaft diameter, shaft height, and other details; however, all design characteristicssuch as overall length, height, conduit box extension, and so onmust be evaluated to ensure proper form, fit, and function. The T-frame motor might be the most highly st...

2010-09-30T23:59:59.000Z

434

2008/2009 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

13.4%. The MPP hours used by the survey respondents represents 70.2 percent of total NERSC MPP usage as of the end of the survey period. The PDSF hours used by the PDSF survey...

435

2011 NERSC User Survey (Read Only)  

NLE Websites -- All DOE Office Websites (Extended Search)

Results Survey Text 2011 NERSC User Survey (Read Only) The survey is closed. Section 1: Overall Satisfaction with NERSC When you are finished with this page click "Save & Go to...

436

On Traversable Lorentzian Wormholes in the Vacuum Low Energy Effective String Theory in Einstein and Jordan Frames  

E-Print Network (OSTI)

Three new classes (II-IV) of solutions of the vacuum low energy effective string theory in four dimensions are derived. Wormhole solutions are investigated in those solutions including the class I case both in the Einstein and in the Jordan (string) frame. It turns out that, of the eight classes of solutions investigated (four in the Einstein frame and four in the corresponding string frame), massive Lorentzian traversable wormholes exist in five classes. Nontrivial massless limit exists only in class I Einstein frame solution while none at all exists in the string frame. An investigation of test scalar charge motion in the class I solution in the two frames is carried out by using the Plebanski-Sawicki theorem. A curious consequence is that the motion around the extremal zero (Keplerian) mass configuration leads, as a result of scalar-scalar interaction, to a new hypothetical "mass" that confines test scalar charges in bound orbits, but does not interact with neutral test particles.

K. K. Nandi; Yuan-Zhong Zhang

2004-05-10T23:59:59.000Z

437

Blackout 2003: Blackout Final Implementation Report | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Blackout Final Implementation Report Blackout 2003: Blackout Final Implementation Report Final Report on the August 14, 2003 Blackout in the United States and Canada: Causes and...

438

Final ECR 2008 Report | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final ECR 2008 Report Final ECR 2008 Report Final ECR 2008 Report Environmental Conflict Resolution Third Annual Report January 2009 More Documents & Publications ECR Annual Report...

439

Weakness of accelerator bounds on electron superluminality without a preferred frame  

E-Print Network (OSTI)

The reference laboratory bounds on superluminality of the electron are obtained from the absence of in-vacuo Cherenkov processes and the determinations of synchrotron radiated power for LEP electrons. It is usually assumed that these analyses establish the validity of a standard special-relativistic description of the electron with accuracy of at least a few parts in $10^{14}$, and in particular this is used to exclude electron superluminality with such an accuracy. We observe that these bounds rely crucially on the availability of a preferred frame. In-vacuo-Cherenkov processes are automatically forbidden in any theory with "deformed Lorentz symmetry", relativistic theories that, while different from Special Relativity, preserve the relativity of inertial frames. Determinations of the synchrotron radiated power can be used to constrain the possibility of Lorentz-symmetry deformation, but provide rather weak bounds, which in particular for electron superluminality we establish to afford us no more constraining power than for an accuracy of a few parts in $10^4$. We argue that this observation can have only a limited role in the ongoing effort of analysis of the anomaly tentatively reported by the OPERA collaboration, but we stress that it could provide a valuable case study for assessing the limitations of "indirect" tests of fundamental laws of physics.

Giovanni Amelino-Camelia; Giulia Gubitosi; Niccoló Loret; Flavio Mercati; Giacomo Rosati

2011-11-03T23:59:59.000Z

440

Aeromagnetic Survey At Lightning Dock Area (Cunniff & Bowers, 2005) | Open  

Open Energy Info (EERE)

Cunniff & Bowers, 2005) Cunniff & Bowers, 2005) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aeromagnetic Survey At Lightning Dock Area (Cunniff & Bowers, 2005) Exploration Activity Details Location Lightning Dock Area Exploration Technique Aeromagnetic Survey Activity Date Usefulness useful DOE-funding Unknown Notes In October 2001, TerraCon, Inc. (2001) of Arlington, Texas conducted the highresolution aeromagnetic survey that was designed to explore the known, shallow geothermal resource and surrounding area. Shallow-subsurface Tertiary volcanic rocks were used as a magnetic basis for mapping structures References Roy A. Cunniff, Roger L. Bowers (2005) Final Technical Report, Geothermal Resource Evaluation And Definitioni (Gred) Program-Phases I, Ii,

Note: This page contains sample records for the topic "final survey frame" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Coal Survey Frequently Asked Questions  

U.S. Energy Information Administration (EIA) Indexed Site

Survey FAQ Survey FAQ Available FAQ: Q. Whom do I contact if I need assistance completing a survey form? Q. Whom do I contact if I require assistance with the registration process, log-in process, instructions pertaining to JavaScript or cookies? Q. What unit of measurement should be used to calculate Btu? Q. How do I update the information that appears under Item I on IDC? Q. Under "Item II: Coal Receipts, Consumption and Stocks," can a value be negative? Q. How do I convert between short tons and metric tons? Vice Versa. Q. How do I convert between pounds to short tons? Vice Versa. Q. How do I correct a mistake on the Survey Form once I have submitted the data? Q. How do I log in if forgot my password? Q. If I accidently deleted the registration letters, how can I get my Mail ID and Code?

442

Federal Buildings Supplemental Survey -- Overview  

U.S. Energy Information Administration (EIA) Indexed Site

Survey > Overview Survey > Overview Overview Percent of FBSS Buildings and Floorspace by Selected Agencies, FY 1993 Percent of FBSS Buildings and Floorspace by Selected Agencies, FY 1993 Sources: Energy Information Administration, Energy Markets and End Use, 1993 Federal Buildings Supplemental Survey. Divider Line Highlights on Federal Buildings The Federal Buildings Supplemental Survey 1993 provides building-level energy-related characteristics for a special sample of commercial buildings owned by the Government. Extensive analysis of the data was not conducted because this report represents the 881 responding buildings (buildings for which interviews were completed) and cannot be used to generalize about Federal buildings in each region. Crosstabulations of the data from the 881 buildings are provided in the Detailed Tables section.

443

2001 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

1 User Survey Results 1 User Survey Results Show All | 1 2 3 4 5 ... 11 | Next » 2001 User Survey Results Table of Contents Response Summary User Information Overall Satisfaction and Importance All Satisfaction Questions and Changes from Previous Years NERSC Information Management (NIM) System Web and Communications Hardware Resources Software Training User Services Comments about NERSC Response Summary NERSC extends its thanks to the 237 users who participated in this year's survey; this compares with 134 respondents last year. The respondents represent all five DOE Science Offices and a variety of home institutions: see User Information. Your responses provide feedback about every aspect of NERSC's operation, help us judge the quality of our services, give DOE information on how well

444

2012 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

operation, help us judge the quality of our services, give DOE information on how well NERSC is doing, and point us to areas we can improve. The survey strives to be...

445

Final Technical Report  

Science Conference Proceedings (OSTI)

The two main objectives of this project were: 1) to develop and test technologies to harvest, transport, store, and separate corn stover to supply a clean raw material to the bioproducts industry, and 2) engineer fermentation systems to meet performance targets for lactic acid and ethanol manufacturers. Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed, which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest/storage/transportation equipment and the processor would build and operate the plant. Pilot fermentation studies demonstrated dramatic improvements in yields and rates with optimization of batch fermentor parameters. Demonstrated yields and rates are approaching those necessary for profitable commercial operation for production of ethanol or lactic acid. The ability of the biocatalyst to adapt to biomass hydrolysate (both biomass sugars and toxins in the hydrolysate) was demonstrated and points towards ultimate successful commercialization of the technology. However, some of this work will need to be repeated and possibly extended to adapt the final selected biocatalyst for the specific commercial hydrolysate composition. The path from corn stover in the farm field to final products, involves a number of steps. Each of these steps has options, problems, and uncertainties; thus creating a very complex multidimensional obstacle to successful commercial development. Through the tasks of this project, the technical and commercial uncertainties of many of these steps have been addressed; thus providing for a clearer understanding of paths forward and commercial viability of a corn stover-based biorefinery.

Aristos Aristidou Natureworks); Robert Kean (NatureWorks); Tom Schechinger (IronHorse Farms, Mat); Stuart Birrell (Iowa State); Jill Euken (Wallace Foundation & Iowa State)

2007-10-01T23:59:59.000Z

446

Radiological Habits Survey: Amersham, 2004  

E-Print Network (OSTI)

.4 Wholesalers and retailers 29 4.5 Internal exposure 29 4.6 External exposure 30 4.7 Water based activities 32 5. TERRESTRIAL RADIATION PATHWAYS 35 5.1 Terrestrial survey area 35 5.2 Wholesalers and retailers 39 5.3 Internal exposure 39 6. DIRECT RADIATION PATHWAYS 43 6.1 Direct radiation survey area 43 6.2 Residential activities

447

Radiological Habits Survey, Dounreay, 2003  

E-Print Network (OSTI)

.5 Internal exposure 25 4.6 External exposure 28 5. TERRESTRIAL RADIATION PATHWAYS 32 5.1 Terrestrial survey area and local produce 32 5.2 Novel radiation pathways 33 5.3 Land cover 33 5.4 Internal exposure 34 5 conversion 14 3.2 Determination of critical groups 14 4. AQUATIC RADIATION PATHWAYS 18 4.1 Aquatic survey

448

Environmental Survey preliminary report, Los Alamos National Laboratory, Los Alamos, New Mexico  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Los Alamos National Laboratory (LANL), conducted March 29, 1987 through April 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the LANL, and interviews with site personnel. The Survey team developed Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Idaho National Engineering Laboratory. When completed, the results will be incorporated into the LANL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the LANL. 65 refs., 68 figs., 73 tabs.

Not Available

1988-01-01T23:59:59.000Z

449

Environmental Survey preliminary report, Oak Ridge National Laboratory (X-10), Oak Ridge, Tennessee  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Oak Ridge National Laboratory (ORNL), X-10 site, conducted August 17 through September 4, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with ORNL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ORNL, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for ORNL. The Interim Report will reflect the final determinations of the ORNL Survey. 120 refs., 68 figs., 71 tabs.

Not Available

1988-07-01T23:59:59.000Z

450

Aerial gamma ray and magnetic survey: Mississippi and Florida airborne survey, Blytheville quadrangle, Tennessee, Arkansas, Alabama, and Missouri. Final report  

SciTech Connect

The Blytheville quadrangle covers a region east of the Mississippi River in the northernmost Gulf Coastal Province. The Tertiary Mississippi Embayment and the older Black Warrior - Arkoma Basins all shoal to the northeast in this area. Surficial exposures are dominantly Cretaceous or younger. Older strata are exposed in the northeast. A search of available literature revealed no known uranium deposits. Ninety uranium anomalies were detected and are discussed briefly. Few were considered significant,and almost all appear to relate to some cultural feature. Magnetic data appears, for the most part, to be in agreement with existing structural interpretations of the region.

Not Available

1980-09-01T23:59:59.000Z

451

Final Technical Report  

SciTech Connect

This is the final report for the Research Grant DE-FG02-08ER54989 'Edge Plasma Simulations in NSTX and CTF: Synergy of Lithium Coating, Non-Diffusive Anomalous Transport and Drifts'. The UCSD group including: A.Yu. Pigarov (PI), S.I. Krasheninnikov and R.D. Smirnov, was working on modeling of the impact of lithium coatings on edge plasma parameters in NSTX with the multi-species multi-fluid code UEDGE. The work was conducted in the following main areas: (i) improvements of UEDGE model for plasma-lithium interactions, (ii) understanding the physics of low-recycling divertor regime in NSTX caused by lithium pumping, (iii) study of synergistic effects with lithium coatings and non-diffusive ballooning-like cross-field transport, (iv) simulation of experimental multi-diagnostic data on edge plasma with lithium pumping in NSTX via self-consistent modeling of D-Li-C plasma with UEDGE, and (v) working-gas balance analysis. The accomplishments in these areas are given in the corresponding subsections in Section 2. Publications and presentations made under the Grant are listed in Section 3.

Alexander Pigarov

2012-06-05T23:59:59.000Z

452

Final Technical Report  

DOE Green Energy (OSTI)

This DOE project DE-FC36-04GO14052 ''Plasma Pilot Plant Test for Treating VOC Emissions from Wood Products Plants'' was conducted by Drexel University in cooperation with Georgia-Pacific (G-P) and Kurchatov Institute (KI). The objective of this project was to test the Plasma Pilot Plant capabilities in wood industry. The final goal of the project was to replace the current state-of-the-art, regenerative thermal oxidation (RTO) technology by Low-Temperature Plasma Technology (LTPT) in paper and wood industry for Volatile Organic Components (VOC) destruction in High Volume Low Concentration (HVLC) vent emissions. MetPro Corporation joined the team as an industrial partner from the environmental control business and a potential leader for commercialization. Concurrent Technology Corporation (CTC) has a separate contract with DOE for this technology evaluation. They prepared questionnaires for comparison of this technology and RTO, and made this comparison. These data are presented in this report along with the description of the technology itself. Experiments with the pilot plant were performed with average plasma power up to 3.6 kW. Different design of the laboratory and pilot plant pulsed coronas, as well as different analytical methods revealed many new peculiarities of the VOC abatement process. The work reported herein describes the experimental results for the VOCs removal efficiency with respect to energy consumption, residence time, water effect and initial concentration.

Alexander Fridman

2005-06-01T23:59:59.000Z

453

Final Report to DOE  

SciTech Connect

This final report summarizes the accomplished goals and provide a list of the publications and presentations made during the project. The goals of the project were accomplished through the various publications submitted to Journals and presentations done at the DOE and international meetings and conferences. The 8 journal articles related to the goals of this project were accepted or submitted. The 23 presentations related to goals of the project were presented at the meetings. There were some minor changes regarding to project goals because of issues encountered during the analysis of the data. For example, a total water probe sensor mounted on the Convair-580 that can be used for defining mixed phase conditions and parameterization, had some problems to estimate magnitude of total water mass, and this resulted in issues providing an accurate parameterization for cloud fraction. Variability related aerosol number concentrations and their composition for direct and indirect effects were studied and published. Results were given to explain aerosol and ice microphysical effects on climate change studies. It is suggested that developed parameterizations should consider the variability in aerosol and ice parameters over the Arctic regions.

Ismail Gultepe

2012-05-15T23:59:59.000Z

454

Final Report to the U  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas Hydrate Markup Language Final Report Gas Hydrate Markup Language Final Report Development of a Gas Hydrate Markup Language Final Report Prepared By: E. Dendy Sloan, Director and Weaver Chair Center for Hydrate Research Colorado School of Mines Golden, Colorado 80401 esloan@mines.edu For: U.S. Department of Energy National Energy Technology Laboratory Under Contract DE-AF26-067Nt00440 Development of a Gas Hydrate Markup Language Final Report Table of Contents Preface............................................................................................................................................. 2 1.0 Introduction......................................................................................................................... 3 1.1 OBJECTIVES OF THE DATABASE AND GHML DEVELOPMENT EFFORT

455

Evaluation of the effect of contact between risers and guide frames on offshore spar platform motions  

E-Print Network (OSTI)

A computer program is developed for the dynamic analysis of a spar platform coupled with mooring lines and risers in waves, winds, and currents. The new multi-contact analysis program is developed for the nonlinear multi-contact coupling between vertical risers and guide frames inside of the spar moon-pool. The program extends capability of the current coupled dynamic analysis program, WINPOST, by adding the capability of analyzing riser effects caused by the contact forces and moments from buoyancy-cans inside the spar moon-pool on the global spar motions. The gap between the buoyancy can and riser guide frames are modeled using three different types of nonlinear gap springs. The new riser model also considers the Coulomb damping between the buoyancy-cans and riser guide frames, and it also calculates the impact force on risers for use in fatigue analysis. The spar platform generally uses vertical risers with dry trees. However, as the water depth increases, the size of the buoyancy-can increases, and it makes installation more difficult. The pneumatic riser support system does not use buoyancy-cans and is an alternative solution to the buoyancy-can approach. The dynamic characteristics of pneumatic riser support system are studied by using the newly developed numerical analysis program. The damped Mathieu instability diagram for the damped Mathieu's equation is developed. Due to spar heave and pitch coupling, Mathieu's instability may become excited in long period waves. In the numerical analysis program, pitch and roll hydrostatic stiffness are recalculated for heave motion in every time step to check Mathieu's instability for the spar platform. Simplified vortex-induced vibration effects on the spar platform are considered in newly developed numerical analysis program, and the results are systematically compared with those of the original program WINPOST. The results in this paper show that the buoyancy-can effect significantly reduces the spar pitch motion, and the Coulomb damping effect also significantly reduces the spar heave motion. The buoyancy-can effect also plays an important role in Mathieu instability. The results also show that a pneumatic riser support system increases the spar heave motion and payload.

Koo, Bon-Jun

2003-08-01T23:59:59.000Z

456

Introducing HTDP 3.1 to transform coordinates across time and spatial reference frames  

Science Conference Proceedings (OSTI)

The National Geodetic Survey, an office within the National Oceanic and Atmospheric Administration, recently released version 3.1 of the Horizontal Time-Dependent Positioning (HTDP) utility for transforming coordinates across time and between spatial ... Keywords: Crustal deformation, Dynamic datums, Geodesy, NAD83

Chris Pearson; Richard Snay

2013-01-01T23:59:59.000Z

457

Final Technical Report  

SciTech Connect

Hackensack University Medical Center's major initiative to create a cleaner healthier and safer environment for patients, employees and the community served by the medical center is built on its commitment to protect the environment and conserve precious energy resources. Since 2004 the Medical Center launched a long term campaign to temper the negative environmental impact of proposed and existing new construction at the medical center and to improve campus wide overall energy efficiency. The plan was to begin by implementing a number of innovative and eco-friendly enhancements to the Gabrellian Women's and Children's Pavilion, in construction at the time, which would lead to Certification by the US Green Building Councils Leadership & Environmental Design (LEED) program. In addition the medical center would evaluate the feasibility of implementing a photovoltaic system in the new construction (in development and planned) to provide clean pollution free electricity. The steps taken to achieve this included conducting a feasibility study complete with architectural and engineering assessments to determine the potential for implementation of a photovoltaic system on the campus and also to conduct an energy survey that would focus on determining specific opportunities and upgrades that would lead to a healthier energy efficient interior environment at the medical center. The studies conducted by the medical center to determine the viability of installing a photovoltaic system identified two key issues that factored into leaderships decision not to implement the solar powered system. These factors were related to the advanced phase of construction of the women's and children's pavilion and the financial considerations to redesign and implement in the ambulatory cancer center. The medical center, in spite of their inability to proceed with the solar aspect of the project upheld their commitment to create a healthier environment for the patients and the community. To achieve a healthier energy efficient interior environment the medical center made substantive upgrades and improvements to the HVAC, plumbing electrical and other operating systems. Measures that were implemented range from use of lighting and plumbing fixture sensors , to reduce electrical and water usage, to use of refrigerants containing hydrochlorofluorocarbons (HCFCs) which cause significantly less depletion of the ozone layer than the refrigerants more commonly used. Additional appropriate energy efficiency component upgrades include the installation of Chiller plants with variable frequency drives (VFDs) and harmonic filters, high efficiency motors, solar window glazing, and lighting/motion sensors.

Helen Cunning

2012-05-08T23:59:59.000Z