Sample records for filters submitted logue

  1. Health Hazards in Indoor Air J.M. Logue, M. H. Sherman, B.C. Singer

    E-Print Network [OSTI]

    . Keywords: Indoor air quality; hazard analysis; residential; criteria pollutants; VOCs; air toxics Citation Health Hazards in Indoor Air J.M. Logue, M. H. Sherman, B.C. Singer.S. Dept. of Housing and Urban Development Office of Healthy Homes and Lead Hazard Control through

  2. LBNL-XXXXX | Logue et al., Evaluation of an Incremental Ventilation Energy Model for Estimating Impacts of Air Sealing and Mechanical Ventilation

    E-Print Network [OSTI]

    LBNL-XXXXX | Logue et al., Evaluation of an Incremental Ventilation Energy Model for Estimating. Turner, Iain S. Walker, and Brett C. Singer Environmental Energy Technologies Division June 2012 LBNL-5796E #12;LBNL-XXXXX | Logue et al., Evaluation of an Incremental Ventilation Energy Model

  3. Logue and Singer, HVAC&R, 20(2): 264-275, 2014. Energy Impacts of Effective Residential Range Hood Use, LBNL-6683E Page 1

    E-Print Network [OSTI]

    Use, LBNL-6683E Page 1 Energy Impacts of Effective Range Hood Use for all U.S. Residential Cooking-92322201-0; and by the California Energy Commission through Contracts 500-05-026 and 500-08-061. LBNL Report Number 6683-E #12;Logue and Singer, HVAC&R, 20(2): 264-275, 2014. Energy Impacts of Effective Residential Range Hood Use, LBNL-6683E

  4. M.H. Sherman, J.M. Logue, B.C. Singer, Infiltration Effects on Residential Pollutant Concentrations for Continuous and Intermittent Mechanical Ventilation Approaches -LBNL Report Number 3978-E

    E-Print Network [OSTI]

    for Continuous and Intermittent Mechanical Ventilation Approaches - LBNL Report Number 3978-E M.H. Sherman, J and Intermittent Mechanical Ventilation Approaches - LBNL Report Number 3978-E 1 Infiltration Effects Energy Commission through Contract 500-08-06. LBNL Report Number 3978-E #12;M.H. Sherman, J.M. Logue, B

  5. Article (LBNL-55462) submitted to A2C2 for publication in September 2004 Issue Introducing a Standard Testing Method for Fan-filter Units

    E-Print Network [OSTI]

    Article (LBNL-55462) submitted to A2C2 for publication in September 2004 Issue Introducing a uniform method for testing and reporting FFU performance. Lawrence Berkeley National Laboratory (LBNL) [2] . This article describes the activities that LBNL has led in developing the standard for FFU

  6. Sampled data lattice filters

    E-Print Network [OSTI]

    Thrift, William Terry

    1980-01-01T23:59:59.000Z

    SAMPLED DATA LATTICE FILTERS A Thesis by WILLIAM TERRY THRIFT III Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1979 Major Subfect...: Electrical Engineering SAMPLED DATA LATTICE FILTERS A Thesis by WILLIAM TERRY THRIFT III Approved as to style and content by: (Chair an of Committee) (Hea f Department) (Member) (Member) (Member) (Member) December 1979 ABSTRACT Sampled Data...

  7. Submitting Jobs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle

  8. Submitting Proposals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle  2007 R&D 100CY2015

  9. Disk filter

    DOE Patents [OSTI]

    Bergman, W.

    1985-01-09T23:59:59.000Z

    An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

  10. E-Print Network 3.0 - air filter inserts Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    an emergency event... implement this procedure submitting air filters for ... Source: Los Alamos National Laboratory, Theoretical Division, Condensed Matter and Statistical Physics...

  11. Filtering apparatus

    DOE Patents [OSTI]

    Haldipur, G.B.; Dilmore, W.J.

    1992-09-01T23:59:59.000Z

    A vertical vessel is described having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas. 18 figs.

  12. Filtering apparatus

    DOE Patents [OSTI]

    Haldipur, Gaurang B. (Monroeville, PA); Dilmore, William J. (Murrysville, PA)

    1992-01-01T23:59:59.000Z

    A vertical vessel having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas.

  13. INSTRUCTIONS FOR SUBMITTING NUCLEAR

    E-Print Network [OSTI]

    . Decommissioning 13 I. Performance 13 J. Nuclear Fuel 14 K. Nuclear Insurance 14 L. Relicensing or Plant RetirementCALIFORNIA ENERGY COMMISSION INSTRUCTIONS FOR SUBMITTING NUCLEAR POWER PLANT-RELATED DATA of Submitted Data 3 NUCLEAR POWER PLANT DATA REQUESTS 6 A. Environmental Impacts 6 B. Spent Fuel Generation 8 C

  14. Jefferson Lab Leadership Council - Mary Logue

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfraredJefferson Lab Click onLaser Twinkles in RareMichael

  15. Optical Filter Design: Gain Analysis and Tolerance Analysis

    E-Print Network [OSTI]

    Vandrasi, Vivek

    2011-10-21T23:59:59.000Z

    OPTICAL FILTER DESIGN: GAIN ANALYSIS AND TOLERANCE ANALYSIS A Thesis by VIVEK VANDRASI Submitted to the O ce of Graduate Studies of Texas A&M University in partial ful llment of the requirements for the degree of MASTER OF SCIENCE August... 2010 Major Subject: Electrical Engineering OPTICAL FILTER DESIGN: GAIN ANALYSIS AND TOLERANCE ANALYSIS A Thesis by VIVEK VANDRASI Submitted to the O ce of Graduate Studies of Texas A&M University in partial ful llment of the requirements...

  16. GPS position determination using a nonlinear predictive filter

    E-Print Network [OSTI]

    Webb, Curtis Brandon

    2012-06-07T23:59:59.000Z

    GPS POSITION DETERIvlINATION USING A NONLINEAR PREDICTIVE FILTER A Thesis by CURTIS BRANDON WEBB Submitted to the Office of Graduate Studies of Texas AEeM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 2002 Major Subject: Aerospace Engineering GPS POSITION DETERlvIINATION USING A NONLINEAR PREDICTIVE FILTER A Thesis by CURTIS BRANDON WEBB Submitted to Texas Akh~f University in partial fulfillment of the requirements...

  17. Submitted to Topology Proceedings

    E-Print Network [OSTI]

    Milovich, David

    Submitted to Topology Proceedings TUKEY CLASSES OF ULTRAFILTERS ON DAVID MILOVICH Abstract, nor U, is Tukey equivalent to [c]() = p = c. We also prove two negative ZFC results about the possible Tukey classes of ultrafilters

  18. Filter apparatus

    DOE Patents [OSTI]

    Kuban, Daniel P. (Oak Ridge, TN); Singletary, B. Huston (Oak Ridge, TN); Evans, John H. (Rockwood, TN)

    1984-01-01T23:59:59.000Z

    A plurality of holding tubes are respectively mounted in apertures in a partition plate fixed in a housing receiving gas contaminated with particulate material. A filter cartridge is removably held in each holding tube, and the cartridges and holding tubes are arranged so that gas passes through apertures therein and across the partition plate while particulate material is collected in the cartridges. Replacement filter cartridges are respectively held in holding canisters mounted on a support plate which can be secured to the aforesaid housing, and screws mounted on said canisters are arranged to push replacement cartridges into the cartridge holding tubes and thereby eject used cartridges therefrom.

  19. Submit IGPPS Proposals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle GuideResearch EffortsSubmit

  20. Submitting Batch Jobs on Franklin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Submitting Batch Jobs Submitting Batch Jobs Debug Jobs Short jobs requesting less than 30 minutes and requiring 512 nodes (2,048 cores) or fewer can run in the debug queue. From...

  1. ARM - Submitting Proposals : Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearch Highlights Media Contact HannagovField CampaignsSubmitting

  2. FINAL Submitted to NREL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCofConstruction Management14,2 - In the Matter of355Submitted to

  3. Submitting PDSF Jobs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle  2007 R&D 100

  4. ?1 Trend Filtering

    E-Print Network [OSTI]

    2007-09-28T23:59:59.000Z

    jump process approach, the LP approach, and median filtering are linear filtering ..... In signal processing, the idea of ?1 regularization comes up in several...

  5. Two-port polarization independent electro-optically tunable wavelength filter in lithium niobate

    E-Print Network [OSTI]

    Ping, Yang

    2004-09-30T23:59:59.000Z

    TWO-PORT POLARIZATION INDEPENDENT ELECTRO-OPTICALLY TUNABLE WAVELENGTH FILTER IN LITHIUM NIOBATE A Thesis by YANG PING Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 2003 Major Subject: Electrical Engineering TWO-PORT POLARIZATION INDEPENDENT ELECTRO-OPTICALLY TUNABLE WAVELENGTH FILTER IN LITHIUM NIOBATE A Thesis by YANG PING Submitted to Texas A&M University...

  6. Spectral slicing filters in titanium diffused lithium niobate (ti:linbo3)

    E-Print Network [OSTI]

    Rabelo, Renato Cunha

    2009-05-15T23:59:59.000Z

    SPECTRAL SLICING FILTERS IN TITANIUM DIFFUSED LITHIUM NIOBATE (Ti:LiNbO 3 ) A Dissertation by RENATO CUNHA RABELO Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of DOCTOR OF PHILOSOPHY December 2008 Major Subject: Electrical Engineering SPECTRAL SLICING FILTERS IN TITANIUM DIFFUSED LITHIUM NIOBATE (Ti:LiNbO 3 ) A Dissertation by RENATO CUNHA RABELO Submitted...

  7. Study of Compact Tunable Filters Using Negative Refractive Index Transmission Lines

    E-Print Network [OSTI]

    Lewis, Brian Patrick

    2011-08-08T23:59:59.000Z

    1 STUDY OF COMPACT TUNABLE FILTERS USING NEGATIVE REFRACTIVE INDEX TRANSMISSION LINES A Thesis by BRIAN PATRICK LEWIS Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... Brian Patrick Lewis 3 STUDY OF COMPACT TUNABLE FILTERS USING NEGATIVE REFRACTIVE INDEX TRANSMISSION LINES A Thesis by BRIAN PATRICK LEWIS Submitted to the Office of Graduate Studies of Texas A&M University in partial...

  8. Design and analysis of an Extended Kalman Filter based navigator for an autonomous underwater vehicle

    E-Print Network [OSTI]

    Just, Bradley Eugene

    1994-01-01T23:59:59.000Z

    DESIGN AND ANALYSIS OF AN EXTENDED KALMAN FILTER BASED NAVIGATOR FOR AN AUTONOMOUS UNDERWATER VEHICLE A Thesis by BRADLEY EUGENE JUST Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 1994 Major Subject: Mechanical Engineering DESIGN AND ANALYSIS OF AN EXTENDED KALMAN FILTER BASED NAVIGATOR FOR AN AUTONOMOUS UNDERWATER VEHICLE A Thesis by BRADLEY EUGENE JUST Submitted to Texas A...

  9. Performance characterization of a packed bed electro-filter

    E-Print Network [OSTI]

    Narayanan, Ajay

    2012-06-07T23:59:59.000Z

    PERFORMANCE CHARACTERIZATION OF A PACKED BED ELECTRO-FILTER A Thesis by A JAY NARAYANAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1990 Major Subject: Safety Engineering PERFORMANCE CHARACTERIZATION OF A PACKED BED ELECTRO-FILTER A Thesis by AJAY NARAYANAN Approved as to style and content by: John P. Wagn (Ch ' of the Com ittee) Aydin Akgerman (Member) Ri ard B...

  10. Rayleigh wave filter for three-component seismic data

    E-Print Network [OSTI]

    Zaidi, Syed Ali Asif

    2012-06-07T23:59:59.000Z

    RAYLEIGH WAVE FILTER FOR THREE ? COMPONENT SEISMIC DATA A Thesis by SYED ALI ASIF ZAIDI Submitted to the Office of Graduate Studies of Texas A&M Lrniversity in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1991 Major Subject: Geophysics RAYLEIGH WAVE FILTER FOR THREE ? COMPONENT SEISMIC DATA A Thesis SYED ALI ASIF ZAIDI Approved as to style and content by: Steven . Harder air of Committee) Joel S. Watkins (Member) Ronald M. Brimhall (1...

  11. Coefficient quantization effects in block state variable digital filters

    E-Print Network [OSTI]

    Lee, Kab Joo

    2012-06-07T23:59:59.000Z

    COEFFICIENT QUANTIZATION EFFECTS IN BLOCK STATE VARIABLE DIGITAL FILTERS A Thesis by KAB JOO LEE Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 1991 Major Subject: Electrical Engineering COEFFICIENT QIJANTIZATIOU EFFECTS IN l3LOCI~ STATE VARIABLE DIGITAL FILTERS A Thesis hs IiAB JOO LEE Approved as to style and content by: WVilliam G. )3liss (Chair of Comnaittee) Norman C...

  12. The design of laser trimmable temperature invariant active NMOS filters

    E-Print Network [OSTI]

    Rybicki, Mathew Anton

    1983-01-01T23:59:59.000Z

    THE DESIGN OF LASER TRIMMABLE TEMPERATURE INVARIANT ACTIVE NMOS FILTERS A Thesis MATHEW ANTON RYBICKI Submitted to the Graduate College of Teras A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1983 Major Subject: Electrical Engineering THE DESIGN OF LASER TRIMMABLE TEMPERA'IURE INVARIANT ACTIVE NMOS FILTERS A Thesis by MATHEW ANTON RYBICKI Approved as to style and content by: Randall L. Geiger (Chairman of Committee) Phil ip ED...

  13. An intelligent filter for an educational virtual laboratory

    E-Print Network [OSTI]

    Sanchez, Sandra Patricia

    2001-01-01T23:59:59.000Z

    AN INTELLIGENT FILTER FOR AN EDUCATIONAL VIRTUAL LABORATORY A Thesis by SANDRA PATRICIA SANCHEZ Submitted to the Office of Graduate Studies of Texas ARM University m partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... May 2001 Major Sublect: Computer Science AN INTELLIGENT FILTER FOR AN EDUCATIONAL VIRTUAL LASORATORY A Thesis by SANDRA PATRICIA SANCHEZ Submttted to Texas ARM Untversity in partial fulfillment of the requtrements for the degree of MASTER...

  14. Recirculating electric air filter

    DOE Patents [OSTI]

    Bergman, W.

    1985-01-09T23:59:59.000Z

    An electric air filter cartridge has a cylindrical inner high voltage electrode, a layer of filter material, and an outer ground electrode formed of a plurality of segments moveably connected together. The outer electrode can be easily opened to remove or insert filter material. Air flows through the two electrodes and the filter material and is exhausted from the center of the inner electrode.

  15. HEPA filter dissolution process

    DOE Patents [OSTI]

    Brewer, K.N.; Murphy, J.A.

    1994-02-22T23:59:59.000Z

    A process is described for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal. 4 figures.

  16. Hepa filter dissolution process

    DOE Patents [OSTI]

    Brewer, Ken N. (Arco, ID); Murphy, James A. (Idaho Falls, ID)

    1994-01-01T23:59:59.000Z

    A process for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal.

  17. Filtering out high frequencies in time series using F-transform$

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Filtering out high frequencies in time series using F-transform$ Vil´em Nov´akc , Irina Perfilievac) Preprint submitted to Elsevier February 10, 2013 #12;Filtering out high frequencies in time series using F at El Paso 500 W. University, El Paso, TX 79968, USA This paper is devoted to analysis of time series

  18. Filtering out high frequencies in time series using F-transform$

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Filtering out high frequencies in time series using F-transform$ Vil´em Nov´akc , Irina Perfilievac) Preprint submitted to Elsevier February 3, 2014 #12;Filtering out high frequencies in time series using F, El Paso, TX 79968, USA 1. Introduction This paper is devoted to analysis of time series using fuzzy

  19. FORMS AND INSTRUCTIONS FOR SUBMITTING

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING RETAIL ELECTRICITY PRICE DATA Manager David Ashuckian Manager ELECTRICITY ANALYSIS OFFICE Scott W. Matthews Deputy Director ELECTRICITY Instructions for Retail Price Forecasting Forms .......................................................9

  20. Filter type gas sampler with filter consolidation

    DOE Patents [OSTI]

    Miley, H.S.; Thompson, R.C.; Hubbard, C.W.; Perkins, R.W.

    1997-03-25T23:59:59.000Z

    Disclosed is an apparatus for automatically consolidating a filter or, more specifically, an apparatus for drawing a volume of gas through a plurality of sections of a filter, where after the sections are subsequently combined for the purpose of simultaneously interrogating the sections to detect the presence of a contaminant. 5 figs.

  1. HEPA filter encapsulation

    DOE Patents [OSTI]

    Gates-Anderson, Dianne D. (Union City, CA); Kidd, Scott D. (Brentwood, CA); Bowers, John S. (Manteca, CA); Attebery, Ronald W. (San Lorenzo, CA)

    2003-01-01T23:59:59.000Z

    A low viscosity resin is delivered into a spent HEPA filter or other waste. The resin is introduced into the filter or other waste using a vacuum to assist in the mass transfer of the resin through the filter media or other waste.

  2. Submitting Organization Sandia National Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle GuideResearch EffortsSubmit

  3. Submitting Batch Jobs on Franklin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle GuideResearchToddSubmitting

  4. CSR Press Release Submitted by

    E-Print Network [OSTI]

    CSR Press Release Submitted by: Categories: Posted: Energy Efficiency Listed as the Top important to their work. Across all five sectors included in the survey, energy efficiency was listed as by far the most important sustainability issue at hand, with water and land & soil falling to the bottom

  5. Viscous Hydraulic Jumps Submitted by

    E-Print Network [OSTI]

    Bush, John W.M.

    Viscous Hydraulic Jumps Submitted by Jeffrey M. Aristoff, Jeffrey D. Leblanc, Annette E. Hosoi, and John W. M. Bush, Massachusetts Institute of Technology We examine the form of the viscous hydraulic of height 210 mm. Elegaard et al.1 first demonstrated that the axial symme- try of the viscous hydraulic

  6. CSR Press Release Submitted by

    E-Print Network [OSTI]

    as of this writing include the Business Council for Sustainable Energy, the Carbon Disclosure Project, Carbon Offset Responsibility Officers Association, GHG Management Institute, International Carbon Reduction and Offset AllianceCSR Press Release Submitted by: Categories: Posted: Carbon TradeEx American Speakers List Featuring

  7. Submitted to *Xidian University, China

    E-Print Network [OSTI]

    Boyer, Edmond

    THESIS Submitted to *Xidian University, China *Institut National des Sciences Appliquées de Rouen, France To obtain China-France Joint PhD in Discipline: PHYSICS Speciality: Energy by WANG Jiajie Shaped.09.2011 Members of the jury: Reviewers: Bai Jintao Professor, Northwest University, Xi'an, China Liu Weidong

  8. Seismic viscoelastic attenuation Submitted to

    E-Print Network [OSTI]

    Cormier, Vernon F.

    Seismic viscoelastic attenuation Submitted to: Encyclopedia of Solid Earth Geophysics Harsh Gupta-3046 USA E-mail: vernon.cormier@uconn.edu Tel: 860-486-3547 Fax: 860-486-3346 #12;SEISMIC VISCOELASTIC ATTENUATION Synonyms Seismic intrinsic attenuation Definitions Linear viscoelastic attenuation. The loss

  9. Contactor/filter improvements

    DOE Patents [OSTI]

    Stelman, D.

    1988-06-30T23:59:59.000Z

    A contactor/filter arrangement for removing particulate contaminants from a gaseous stream is described. The filter includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. A cover screen isolates the filter element from contact with the moving granular bed. In one embodiment, the granular material is comprised of porous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses. 6 figs.

  10. Filter holder and gasket assembly for candle or tube filters

    DOE Patents [OSTI]

    Lippert, T.E.; Alvin, M.A.; Bruck, G.J.; Smeltzer, E.E.

    1999-03-02T23:59:59.000Z

    A filter holder and gasket assembly are disclosed for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut. 9 figs.

  11. FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Instructions for Electric Transmission Forms ............................................................. 6 General Instructions

  12. PROCEDURES and INSTRUCTIONS for SUBMITTING FINAL ...

    E-Print Network [OSTI]

    saerens

    2010-04-16T23:59:59.000Z

    Apr 16, 2010 ... PROCEDURES and INSTRUCTIONS for SUBMITTING FINAL GRADES. Please view rather than print this information. A version without...

  13. Why We Ventilate J.M. Logue1

    E-Print Network [OSTI]

    the results of work done at the Lawrence Berkeley National Lab to identify the air pollutants that drive, we present results of an impact assessment that identified the air pollutants that cause the most. of Housing and Urban Development Office of Healthy Homes and Lead Hazard Control through Interagency

  14. The design and characterization of switched-resistor filters

    E-Print Network [OSTI]

    Bass, James Traugott

    1983-01-01T23:59:59.000Z

    THE DESIGN AND CHARACTERIZATION OF SWITCHED-RESISTOR FILTERS A Thesis by JAMES TRAUGOTT BASS Submitted to t'ne Graduate College of Texas ARM University in partial fulf'llment of the requirement. for the degree of MASTER OF SCIENCE August... 1983 Major Subjec : Electrical Engineering THE DESIGN AND CHARACTERIZATION OF SWITCHED-RESISTOR FILTERS A THESIS BY JAMES TRAUGOTT BASS Approved as to style and content by: an a I . caper (Chairman of Committee) Nor. an C. GriswoI, d (Member...

  15. Sub-micron filter

    DOE Patents [OSTI]

    Tepper, Frederick (Sanford, FL); Kaledin, Leonid (Port Orange, FL)

    2009-10-13T23:59:59.000Z

    Aluminum hydroxide fibers approximately 2 nanometers in diameter and with surface areas ranging from 200 to 650 m.sup.2/g have been found to be highly electropositive. When dispersed in water they are able to attach to and retain electronegative particles. When combined into a composite filter with other fibers or particles they can filter bacteria and nano size particulates such as viruses and colloidal particles at high flux through the filter. Such filters can be used for purification and sterilization of water, biological, medical and pharmaceutical fluids, and as a collector/concentrator for detection and assay of microbes and viruses. The alumina fibers are also capable of filtering sub-micron inorganic and metallic particles to produce ultra pure water. The fibers are suitable as a substrate for growth of cells. Macromolecules such as proteins may be separated from each other based on their electronegative charges.

  16. Submitting Organization Sandia National Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle GuideResearch

  17. Submitting Organization Sandia National Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle GuideResearchTodd Bauer

  18. Submitting Organization Sandia National Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle GuideResearchTodd BauerSean

  19. Submitting Batch Jobs on Carver

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle GuideResearchTodd

  20. Submitting Work | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle  2007 R&D

  1. The development and evaluation of a neutron window filter facility utilizing the TAMU NSC TRIGA reactor

    E-Print Network [OSTI]

    Harding, Patricia Colleen

    2012-06-07T23:59:59.000Z

    THE DEVELOPMENT AND EVALUATION OF A NEUTRON WINDOW FILTER FACILITY UTILIZING THE TAMU NSC TRIGA REACTOR A Thesis by PATRICIA COLLEEN HARDING Submitted to the Graduate College of Texas AAM University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE December 1982 Major Subject: Nuclear Engineering THE DEVELOPMENT AND EVALUATION OF A NEUTRON WINDOW FILTER FACILITY UTILIZING THE TAMU NSC TRIGA REACTOR A Thesis by PATRICIA COLLEEN HARDING Approved as to style...

  2. Correlated tuning of high-frequency integrated continuous-time filters

    E-Print Network [OSTI]

    Brooks, Todd Lee

    2012-06-07T23:59:59.000Z

    CORRELATED TUNING OF HIGH ? FREQUENCY INTEGRATED CONTINUOUS ? TIME FILTERS A Thesis TODD LEE BROOKS Submitted to the Once of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE May 1992 Major Subject: Electrical Engineering CORRELATED TUNING OF HIGH ? FREQUENCY INTEGRATED CONTINUOUS ? TIME FILTERS A Thesis by TODD LEE BROOKS Approved as to style and content by: Ran 11 L. Geiger (Co-Chair of Committee) William G...

  3. Design and simulation of a scatterometer processor using digital filtering techniques

    E-Print Network [OSTI]

    Galka, Walter

    2012-06-07T23:59:59.000Z

    DESIGN AND SIMULATION OF A SCATTEROMETER PROCESSOR USING DIGITAL FILTERING TECHNIQUES A Thesis by WALTER GALKA Submitted to the Graduate College of Texas A/M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE December 1975 Major Subject: Electrical Engineering DESIGN AND SIMULATION OF A SCATTEROMETER PROCESSOR USING DIGITAL FILTERING TECHNIQUES A Thesis by WALTER GALKA Approved as to style and content by: -Chairman of Co ' ee) /Co'-Chairman o...

  4. A circuit for gain measurement of frequency referenced digitally self tuned filters

    E-Print Network [OSTI]

    Cook, Robert Wake

    2012-06-07T23:59:59.000Z

    A CIRCUIT FOR GAIN MEASUREMENT OF FREQUENCY REFERENCED DIGITALLY SELF TUNED FILTERS A Thesis by ROBERT WAKE COOK Submitted to the Graduate College of Texas ASSAM University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE December 1985 Major Subject: Electrical Engineering A CIRCUIT FOR GAIN MEASUREMENT OF FREQUENCY REFERENCED DIGITALLY SELF TUNED FILTERS A Thesis bv ROl3ERT WAKE COOK Approved as to style and content by: Dr. Randal! L. Geiger (Chairman...

  5. Hybrid integrated active antennas, voltage-controlled oscillators and switchable & tunable CPW-slotline filters

    E-Print Network [OSTI]

    Navarro, Julio A

    1990-01-01T23:59:59.000Z

    HYBRID INTEGRATED ACTIVE ANTENNAS, VOLTAGE-CONTROLLED OSCILLATORS AND SWITCHABLE & TUNABLE CPW-SLOTLINE FILTERS A Thesis by JULIO ANGEL NAVARRO Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE December 1990 Major Subject: Electrical Engineering HYBRID INTEGRATED ACTIVE ANTENNAS, VOLTAGE-CONTROLLED OSCILLATORS AND SWITCHABLE 2 TUNABLE CPW-SLOTLINE FILTERS A Thesis by JULIO ANGEL NAVARRO...

  6. Programmable two-port polarization independent electro-optically tunable wavelength filter in lithium niobate

    E-Print Network [OSTI]

    Ping, Yang

    2009-05-15T23:59:59.000Z

    PROGRAMMABLE TWO-PORT POLARIZATION INDEPENDENT ELECTRO-OPTICALLY TUNABLE WAVELENGTH FILTER IN LITHIUM NIOBATE A Dissertation by YANG PING Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of DOCTOR OF PHILOSOPHY December 2006 Major Subject: Electrical Engineering PROGRAMMABLE TWO-PORT POLARIZATION INDEPENDENT ELECTRO-OPTICALLY TUNABLE WAVELENGTH FILTER IN LITHIUM NIOBATE A Dissertation by YANG...

  7. Westinghouse filter update

    SciTech Connect (OSTI)

    Lippert, T.E.; Bruck, G.J.; Smeltzer, E.E.; Newby, R.A.; Bachovchin, D.M. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center

    1993-09-01T23:59:59.000Z

    Hot gas filters have been implemented and operated in four different test facilities: Subpilot scale entrained gasifier, located at the Texaco Montebello Research facilities in California, Foster Wheeler Advanced Pressurized Fluidized Bed Combustion pilot plant facilities, located in Livingston, New Jersey, Slipstream of the American Electric Power (AEP) 70 MW (electric) Tidd-PFBC, located in Brilliant, Ohio, and in the Ahlstrom 10 MW (thermal) Circulating PFBC facility, located in Karhula, Finland. Candle filter testing has occurred at all four facilities; cross flow filter testing has occurred at the Texaco and Foster Wheeler facilities. Table 1 identifies and summarizes the key operating characteristics of these facilities and the type and scale of filter unit tested. A brief description of each project is given.

  8. Differential Filtering and Detexturing

    E-Print Network [OSTI]

    He, Lei

    2014-08-18T23:59:59.000Z

    introduce how to use bilateral filter appropriately on image texture removal by modifying its range image. While current existing methods either fail to remove the textures completely or over blur main structures, our method delivers best-in-class image...

  9. Remotely serviced filter and housing

    DOE Patents [OSTI]

    Ross, M.J.; Zaladonis, L.A.

    1987-07-22T23:59:59.000Z

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station. 6 figs.

  10. Filters for cathodic arc plasmas

    DOE Patents [OSTI]

    Anders, Andre (Albany, CA); MacGill, Robert A. (Richmond, CA); Bilek, Marcela M. M. (Engadine, AU); Brown, Ian G. (Berkeley, CA)

    2002-01-01T23:59:59.000Z

    Cathodic arc plasmas are contaminated with macroparticles. A variety of magnetic plasma filters has been used with various success in removing the macroparticles from the plasma. An open-architecture, bent solenoid filter, with additional field coils at the filter entrance and exit, improves macroparticle filtering. In particular, a double-bent filter that is twisted out of plane forms a very compact and efficient filter. The coil turns further have a flat cross-section to promote macroparticle reflection out of the filter volume. An output conditioning system formed of an expander coil, a straightener coil, and a homogenizer, may be used with the magnetic filter for expanding the filtered plasma beam to cover a larger area of the target. A cathodic arc plasma deposition system using this filter can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

  11. Filter component assessment

    SciTech Connect (OSTI)

    Alvin, M.A.; Lippert, T.E.; Diaz, E.S.; Smeltzer, E.W. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center

    1995-11-01T23:59:59.000Z

    The objectives of this program are to provide a more ruggedized filter system that utilizes porous ceramic filters which have improved resistance to damage resulting from crack propagation, thermal fatigue and/or thermal excursions during plant or process transient conditions, and/or mechanical ash bridging events within the candle filter array. As part of the current Phase 1, Task 1, effort of this program, Westinghouse is evaluating the filtration characteristics, mechanical integrity, and corrosion resistance of the following advanced or second generation candle filters for use in advanced coal-fired process applications: 3M CVI-SiC composite--chemical vapor infiltration of silicon carbide into an aluminosilicate Nextel{trademark} 312 fiber preform; DuPont PRD-66--filament wound candle filter structure containing corundum, cordierite, cristobalite, and mullite; DuPont SiC-SiC--chemical infiltration of silicon carbide into a silicon carbide Nicalon{trademark} fiber mat or felt preform; and IF and P Fibrosic{trademark}--vacuum infiltrated oxide-based chopped fibrous matrix. Results to date are presented.

  12. NIST ITL submits PINS form to ANSI

    E-Print Network [OSTI]

    1 NIST ITL submits PINS form to ANSI for initiation of project to draft new or revised ANS. ANSI consensus body, starting with pre- canvass notice and invitation, which is posted on the ANSI/ NIST and develops canvass list. NIST ITL issues 45-day ballot and submits to ANSI for concurrent 45- day public

  13. Ozone decomposing filter

    DOE Patents [OSTI]

    Simandl, Ronald F. (Farragut, TN); Brown, John D. (Harriman, TN); Whinnery, Jr., LeRoy L. (Dublin, CA)

    1999-01-01T23:59:59.000Z

    In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

  14. Ceramic HEPA Filter Program

    SciTech Connect (OSTI)

    Mitchell, M A; Bergman, W; Haslam, J; Brown, E P; Sawyer, S; Beaulieu, R; Althouse, P; Meike, A

    2012-04-30T23:59:59.000Z

    Potential benefits of ceramic filters in nuclear facilities: (1) Short term benefit for DOE, NRC, and industry - (a) CalPoly HTTU provides unique testing capability to answer questions for DOE - High temperature testing of materials, components, filter, (b) Several DNFSB correspondences and presentations by DNFSB members have highlighted the need for HEPA filter R and D - DNFSB Recommendation 2009-2 highlighted a nuclear facility response to an evaluation basis earthquake followed by a fire (aka shake-n-bake) and CalPoly has capability for a shake-n-bake test; (2) Intermediate term benefit for DOE and industry - (a) Filtration for specialty applications, e.g., explosive applications at Nevada, (b) Spin-off technologies applicable to other commercial industries; and (3) Long term benefit for DOE, NRC, and industry - (a) Across industry, strong desire for better performance filter, (b) Engineering solution to safety problem will improve facility safety and decrease dependence on associated support systems, (c) Large potential life-cycle cost savings, and (d) Facilitates development and deployment of LLNL process innovations to allow continuous ventilation system operation during a fire.

  15. Rotating drum filter

    DOE Patents [OSTI]

    Anson, Donald (Worthington, OH)

    1990-01-01T23:59:59.000Z

    A perforated drum (10) rotates in a coaxial cylindrical housing (18) having three circumferential ports (19,22,23), and an axial outlet (24) at one end. The axis (11) is horizontal. A fibrous filter medium (20) is fed through a port (19) on or near the top of the housing (81) by a distributing mechanism (36) which lays a uniform mat (26) of the desired thickness onto the rotating drum (10). This mat (26) is carried by the drum (10) to a second port (23) through which dirty fluid (13) enters. The fluid (13) passes through the filter (26) and the cleaned stream (16) exits through the open end (15) of the drum (10) and the axial port (24) in the housing (18). The dirty filter material (20) is carried on to a third port (22) near the bottom of the housing (18) and drops into a receiver (31) from which it is continuously removed, cleaned (30), and returned (32) to the charging port (36) at the top. To support the filter mat, the perforated cylinder may carry a series of tines (40), shaped blades (41), or pockets, so that the mat (26) will not fall from the drum (10) prematurely. To minimize risk of mat failure, the fluid inlet port (23) may be located above the horizontal centerline (11).

  16. OPTIMIZATION OF ADVANCED FILTER SYSTEMS

    SciTech Connect (OSTI)

    R.A. Newby; M.A. Alvin; G.J. Bruck; T.E. Lippert; E.E. Smeltzer; M.E. Stampahar

    2002-06-30T23:59:59.000Z

    Two advanced, hot gas, barrier filter system concepts have been proposed by the Siemens Westinghouse Power Corporation to improve the reliability and availability of barrier filter systems in applications such as PFBC and IGCC power generation. The two hot gas, barrier filter system concepts, the inverted candle filter system and the sheet filter system, were the focus of bench-scale testing, data evaluations, and commercial cost evaluations to assess their feasibility as viable barrier filter systems. The program results show that the inverted candle filter system has high potential to be a highly reliable, commercially successful, hot gas, barrier filter system. Some types of thin-walled, standard candle filter elements can be used directly as inverted candle filter elements, and the development of a new type of filter element is not a requirement of this technology. Six types of inverted candle filter elements were procured and assessed in the program in cold flow and high-temperature test campaigns. The thin-walled McDermott 610 CFCC inverted candle filter elements, and the thin-walled Pall iron aluminide inverted candle filter elements are the best candidates for demonstration of the technology. Although the capital cost of the inverted candle filter system is estimated to range from about 0 to 15% greater than the capital cost of the standard candle filter system, the operating cost and life-cycle cost of the inverted candle filter system is expected to be superior to that of the standard candle filter system. Improved hot gas, barrier filter system availability will result in improved overall power plant economics. The inverted candle filter system is recommended for continued development through larger-scale testing in a coal-fueled test facility, and inverted candle containment equipment has been fabricated and shipped to a gasifier development site for potential future testing. Two types of sheet filter elements were procured and assessed in the program through cold flow and high-temperature testing. The Blasch, mullite-bonded alumina sheet filter element is the only candidate currently approaching qualification for demonstration, although this oxide-based, monolithic sheet filter element may be restricted to operating temperatures of 538 C (1000 F) or less. Many other types of ceramic and intermetallic sheet filter elements could be fabricated. The estimated capital cost of the sheet filter system is comparable to the capital cost of the standard candle filter system, although this cost estimate is very uncertain because the commercial price of sheet filter element manufacturing has not been established. The development of the sheet filter system could result in a higher reliability and availability than the standard candle filter system, but not as high as that of the inverted candle filter system. The sheet filter system has not reached the same level of development as the inverted candle filter system, and it will require more design development, filter element fabrication development, small-scale testing and evaluation before larger-scale testing could be recommended.

  17. Web Content Filtering 1 User Guidelines Web content filter guidelines

    E-Print Network [OSTI]

    Web Content Filtering 1 User Guidelines Web content filter guidelines Introduction The basic criterion for blocking a Web page Categories of material which will be blocked Requesting the unblocking of Aberdeen applies a Web Content Filtering service to all web pages accessed from the undergraduate network

  18. Quick-change filter cartridge

    DOE Patents [OSTI]

    Rodgers, John C. (Santa Fe, NM); McFarland, Andrew R. (College Station, TX); Ortiz, Carlos A. (Bryan, TX)

    1995-01-01T23:59:59.000Z

    A quick-change filter cartridge. In sampling systems for measurement of airborne materials, a filter element is introduced into the sampled airstream such that the aerosol constituents are removed and deposited on the filter. Fragile sampling media often require support in order to prevent rupture during sampling, and careful mounting and sealing to prevent misalignment, tearing, or creasing which would allow the sampled air to bypass the filter. Additionally, handling of filter elements may introduce cross-contamination or exposure of operators to toxic materials. Moreover, it is desirable to enable the preloading of filter media into quick-change cartridges in clean laboratory environments, thereby simplifying and expediting the filter-changing process in the field. The quick-change filter cartridge of the present invention permits the application of a variety of filter media in many types of instruments and may also be used in automated systems. The cartridge includes a base through which a vacuum can be applied to draw air through the filter medium which is located on a porous filter support and held there by means of a cap which forms an airtight seal with the base. The base is also adapted for receiving absorbing media so that both particulates and gas-phase samples may be trapped for investigation, the latter downstream of the aerosol filter.

  19. FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC

    E-Print Network [OSTI]

    for Electric Transmission Forms....................................................... 5 General InstructionsCALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Integrated Energy Policy Report and the 2007 Strategic Transmission Investment Plan. Keywords Electric

  20. Procedures and Instructions for Submitting Final Grades

    E-Print Network [OSTI]

    saerens

    2012-01-06T23:59:59.000Z

    Jan 6, 2012 ... The time limit might be shorter than the one the video mentions. 9. When done, make sure to click again on the Submit button. Then go to the...

  1. Siphon filter assessment for Northern Ghana

    E-Print Network [OSTI]

    Ziff, Sara Elizabeth

    2009-01-01T23:59:59.000Z

    The siphon filter is a household water filter developed by the Basic Water Needs Foundation based on the design of ceramic candle filters. The siphon filter is marketed under brand names CrystalPur and Tulip and is sold ...

  2. Regenerable particulate filter

    DOE Patents [OSTI]

    Stuecker, John N. (Albuquerque, NM); Cesarano, III, Joseph (Albuquerque, NM); Miller, James E. (Albuquerque, NM)

    2009-05-05T23:59:59.000Z

    A method of making a three-dimensional lattice structure, such as a filter used to remove particulates from a gas stream, where the physical lattice structure is designed utilizing software simulation from pre-defined mass transfer and flow characteristics and the designed lattice structure is fabricated using a free-form fabrication manufacturing technique, where the periodic lattice structure is comprised of individual geometric elements.

  3. Filter Press Building

    E-Print Network [OSTI]

    Bush, W. M.

    "FILTER PRESS BUILDING" AVON LAKE WATER POLLUTION CONTROL CENTER HEAT PUMP HEATING AND COOLING SYSTEM William M. Bush, P.E. The Cleveland Electric Illuminating Company Cleveland, Ohio ABSTRACT The high heat value of the plant's treated wa..." of the thousands of homes in the com munity, we were able to recommend a system of heat recovery refrigeration cycles that would provide space conditioning at a fraction of the cost of natural gas. The all-electric recommendation was accepted because...

  4. CLEERS Activities: Diesel Soot Filter Characterization & NOx...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Activities: Diesel Soot Filter Characterization & NOx Control Fundamentals CLEERS Activities: Diesel Soot Filter Characterization & NOx Control Fundamentals 2009 DOE Hydrogen...

  5. Electrically-Assisted Diesel Particulate Filter Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Substrate Studies of an Electrically-Assisted Diesel Particulate Filter Electrically-Assisted Diesel Particulate Filter Regeneration...

  6. Advanced Particulate Filter Technologies for Direct Injection...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Particulate Filter Technologies for Direct Injection Gasoline Engine Applications Advanced Particulate Filter Technologies for Direct Injection Gasoline Engine Applications...

  7. FIESTA, software package for the design, synthesis, and integrated circuit layout of continuous-time OTA-C filters

    E-Print Network [OSTI]

    Kobe, Michael Robert

    1989-01-01T23:59:59.000Z

    FIESTA: SOFTWARE PACKAGE FOR THE DESIGN, SYNTHESIS, AND INTEGRATED CIRCUIT LAYOUT OF CONTINUOUS-TIME OTA-C FILTERS A Thesis by MICHAEL ROBERT KOBE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 1989 Major Subject: Electrical Engineering FIESTA: SOFTWARE PACKAGE FOR THE DESIGN, SYNTHESIS, AND INTEGRATED CIRCUIT LAYOUT OF CONTINUOUS-TIME OTA-C FILTERS A Thesis by MICHAEL ROBERT KOBE Approved...

  8. In-service filter testing

    SciTech Connect (OSTI)

    Terada, K.; Woodard, R.W.; Jensen, R.T.

    1985-04-29T23:59:59.000Z

    This report contains the observations, test results, and conclusions of three separate in-service tests beginning in November 1979 and concluding in September 1983. The in-service tests described in this report produced encouraging results on filters constructed with fiberglass medium containing 5% Nomex and separators of aluminum foil coated with a thin film of vinyl-epoxy polymer. Filters containing medium with Kevlar fiber additives demonstrated they merited further evaluation. Other types of filters tested include separatorless filters (Flanders SuperFlow) and one filter with fiberglass separators. Asbestos-containing filters were used for comparison until their supply was exhausted. All filters tested were judged to have performed satisfactorily under the test conditions.

  9. Comparative survey on non linear filtering methods : the quantization and the particle filtering approaches

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    , importance sam- pling, Kalman filter, stochastic volatility, infinite dimension filter. 1 Introduction We models: the Kalman filter case, the canonical stochastic volatility model and the infinite dimension

  10. Note: Cryogenic coaxial microwave filters

    SciTech Connect (OSTI)

    Tancredi, G.; Meeson, P. J. [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom)] [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom); Schmidlin, S. [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom) [Department of Physics, Royal Holloway, University of London, Egham TW20 0EX (United Kingdom); National Physical Laboratory, Hampton Road, Teddington TW11 0LW (United Kingdom)

    2014-02-15T23:59:59.000Z

    The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We further perform an indicative test of the operation of the filters by making current-voltage measurements of small, underdamped Josephson junctions at 15 mK.

  11. filter + electrical Zeroforcing Electrical Filters for Direct Detection Optical Systems

    E-Print Network [OSTI]

    Humblet, Pierre A.

    signal envelope. The thermal noise n(t) from the electronics is assumed to be the dominant noise) = Re{p(t-iT )p # (t-jT )}, p(t) is the complex envelope of the received optical pulse takingPerot interferometer We consider a FabryPerot filter as the optical demulti plexing filter [1]. The envelope

  12. A fully differential BiCMOS OTA for a 10.7MHz bandpass filter

    E-Print Network [OSTI]

    Ali, Muhammad Imtiaz

    1993-01-01T23:59:59.000Z

    A FULLY DIFFERENTIAL BICMOS OTA FOR A 10. 7MHZ BANDPASS FILTER A Thesis by MUHAMMAD IMTIAZ ALI Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1993 Major Subject: ElectricaJ Engineering A FULLY DIFFERENTIAL BICMOS OTA FOR A 10. 7MHZ BANDPASS FILTER A Thesis by MUHAMMAD IMTIAZ ALI Approved as to style and content by: g) /4 Edgar Sanchez-Sinencio (Chair of Committee) She f H. K...

  13. Announcement (Submitted to `Photosynthesis Research, 2006)

    E-Print Network [OSTI]

    Govindjee "Gov"

    1 Announcement (Submitted to `Photosynthesis Research, 2006) Advances in Photosynthesis, in Advances in Photosynthesis and Respiration (AIPH) Series, of The Structure and Function of Plastids, a book Rochaix, Michel Goldschmidt-Clermont and Sabeeha Merchant); and Volume 14 (Photosynthesis in Algae, edited

  14. Solid colloidal optical wavelength filter

    DOE Patents [OSTI]

    Alvarez, Joseph L. (Boulder, CO)

    1992-01-01T23:59:59.000Z

    A solid colloidal optical wavelength filter includes a suspension of spheal particles dispersed in a coagulable medium such as a setting plastic. The filter is formed by suspending spherical particles in a coagulable medium; agitating the particles and coagulable medium to produce an emulsion of particles suspended in the coagulable medium; and allowing the coagulable medium and suspended emulsion of particles to cool.

  15. Sintered composite medium and filter

    DOE Patents [OSTI]

    Bergman, Werner (Pleasanton, CA)

    1987-01-01T23:59:59.000Z

    A particulate filter medium is formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers. A preferred composition is about 40 vol. % quartz and about 60 vol. % stainless steel fibers. The media is sintered at about 1100.degree. C. to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550.degree. C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  16. Backpulse and filter feed velocity effects on Norton filter performance

    SciTech Connect (OSTI)

    Siler, J.L.

    1990-05-08T23:59:59.000Z

    A series of tests have been conducted using the 2.2 ft{sup 2} Norton filter to solve the fouling problems observed with the ETF Norton system. The objective of these tests was to determine filter efficiency as a function of backpulse strength and feed velocity. Based on experimental results, it is recommend that the filters should be operated at the following conditions: (1) Backpulse Transmembrane Pressure/FeedTransmembrane Pressure (BP/FP) > 1.5, preferably 2 or 3. (2) Feed crossflow velocity = 6--8 f/s. It is expected that operation at these conditions should improve performance by 30--60%.

  17. Low power architecture and circuit techniques for high boost wideband Gm-C filters

    E-Print Network [OSTI]

    Gambhir, Manisha

    2007-09-17T23:59:59.000Z

    Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved by: Co-Chairs of Committee, Edgar Sanchez-Sinencio Jose Silva-Martinez Committee... Gm-C Filters. (May 2006) Manisha Gambhir, B.E. Delhi University Co-Chairs of Advisory Committee: Dr. Edgar Sanchez-Sinencio Dr. Jose Silva-Martinez With the current trend towards integration...

  18. Performance of ceramic membrane filters

    SciTech Connect (OSTI)

    Ahluwalia, R.K.; Im, K.H.; Geyer, H.K. [Argonne National Lab., IL (United States); Shelleman, D.L.; Tressler, R.E. [Pennsylvania State Univ., University Park, PA (United States)

    1996-08-01T23:59:59.000Z

    CeraMem Corp.`s ceramic-membrane coated, dead-end ceramic filters offer a promising alternative to ceramic candle filters providing long-term operational and reliability issues are resolved: regenerability of filter passages by back pulse cleaning, tolerance to alkali-containing combustion gas and thermal/chemical aging. ANL is responsible for analytical modeling of filtration and pulse cleaning operations, flow-through testing, and prediction of filter response to thermal cycling under realistic service conditions. A test apparatus was built to expose ceramic filter specimens to chemical environments simulating operation of pressurized fluidized bed and integrated gasification combined cycle plants. Four long-duration tests have been conducted in which 100-cpsi channel filters were exposed to ash collected downstream of the cyclone separator at the PFBC plant at Tidd. Results are discussed. Focus has now shifted to exposing the advanced candle filter specimens to reducing gas environments containing NaCl, H{sub 2}S, H{sub 2}O, and gasification ash.

  19. ALSHub: Submit Proposals and Give Us Your Feedback!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALSHub: Submit Proposals and Give Us Your Feedback ALSHub: Submit Proposals and Give Us Your Feedback Print The ALS User Office rolled out ALSHub, a new user portal, five months...

  20. NOVA Portal: Submit VASP Jobs to Carver via the Web

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NOVA Portal: Submit VASP Jobs to Carver via the Web NOVA Portal: Submit VASP Jobs to Carver via the Web May 11, 2012 by Francesca Verdier (0 Comments) NOVA is an experimental web...

  1. Tunable Imaging Filters in Astronomy

    E-Print Network [OSTI]

    J. Bland-Hawthorn

    2000-06-05T23:59:59.000Z

    While tunable filters are a recent development in night time astronomy, they have long been used in other physical sciences, e.g. solar physics, remote sensing and underwater communications. With their ability to tune precisely to a given wavelength using a bandpass optimized for the experiment, tunable filters are already producing some of the deepest narrowband images to date of astrophysical sources. Furthermore, some classes of tunable filters can be used in fast telescope beams and therefore allow for narrowband imaging over angular fields of more than a degree over the sky.

  2. ADVANCED HOT GAS FILTER DEVELOPMENT

    SciTech Connect (OSTI)

    E.S. Connolly; G.D. Forsythe

    2000-09-30T23:59:59.000Z

    DuPont Lanxide Composites, Inc. undertook a sixty-month program, under DOE Contract DEAC21-94MC31214, in order to develop hot gas candle filters from a patented material technology know as PRD-66. The goal of this program was to extend the development of this material as a filter element and fully assess the capability of this technology to meet the needs of Pressurized Fluidized Bed Combustion (PFBC) and Integrated Gasification Combined Cycle (IGCC) power generation systems at commercial scale. The principal objective of Task 3 was to build on the initial PRD-66 filter development, optimize its structure, and evaluate basic material properties relevant to the hot gas filter application. Initially, this consisted of an evaluation of an advanced filament-wound core structure that had been designed to produce an effective bulk filter underneath the barrier filter formed by the outer membrane. The basic material properties to be evaluated (as established by the DOE/METC materials working group) would include mechanical, thermal, and fracture toughness parameters for both new and used material, for the purpose of building a material database consistent with what is being done for the alternative candle filter systems. Task 3 was later expanded to include analysis of PRD-66 candle filters, which had been exposed to actual PFBC conditions, development of an improved membrane, and installation of equipment necessary for the processing of a modified composition. Task 4 would address essential technical issues involving the scale-up of PRD-66 candle filter manufacturing from prototype production to commercial scale manufacturing. The focus would be on capacity (as it affects the ability to deliver commercial order quantities), process specification (as it affects yields, quality, and costs), and manufacturing systems (e.g. QA/QC, materials handling, parts flow, and cost data acquisition). Any filters fabricated during this task would be used for product qualification tests being conducted by Westinghouse at Foster-Wheeler's Pressurized Circulating Fluidized Bed (PCFBC) test facility in Karhula, Finland. Task 5 was designed to demonstrate the improvements implemented in Task 4 by fabricating fifty 1.5-meter hot gas filters. These filters were to be made available for DOE-sponsored field trials at the Power Systems Development Facility (PSDF), operated by Southern Company Services in Wilsonville, Alabama.

  3. Submitting Environmental Impact Statements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy Strain Rate Characterization|EnergySubmeterSubmitting

  4. A comparative study of collection efficiencies using 0.80 and 1.2 micrometer pore size filters in evaluating airborne asbestos dust

    E-Print Network [OSTI]

    Holt, Grady Lynn

    1974-01-01T23:59:59.000Z

    A COMPARATIVE STUDY OF COLLECTION EFFICIENCIES USING O. RO AND 1. 2 MICROMETER PORE SIZE FILTERS IN EVALUATING AIRBORNE ASBESTOS DUST A Thesis by GRADY LYNN HOLT Submitted to the Graduate College of' Texas A&M University in partial... fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1974. Major Subject: Industrial Hygiene A COMPARATIVE . TUDY OF COLLECTION EFFICIENCIES USING O. BO AND 1. 2 MICROMETER PORE SIZE FILTERS IN EVALUATING AIRBORNE ASBESTOS DUST A...

  5. particle flow for nonlinear filters

    E-Print Network [OSTI]

    Dobigeon, Nicolas

    particle flow for nonlinear filters Fred Daum 19 June 2012 Copyright © 2012 Raytheon Company. All rights reserved. Customer Success Is Our Mission is a trademark of Raytheon Company. 1 #12;discrete time

  6. Westinghouse advanced particle filter system

    SciTech Connect (OSTI)

    Lippert, T.E.; Bruck, G.J.; Sanjana, Z.N.; Newby, R.A.

    1995-11-01T23:59:59.000Z

    Integrated Gasification Combined Cycles (IGCC), Pressurized Fluidized Bed Combustion (PFBC) and Advanced PFBC (APFB) are being developed and demonstrated for commercial power generation application. Hot gas particulate filters are key components for the successful implementation of IGCC, PFBC and APFB in power generation gas turbine cycles. The objective of this work is to develop and qualify through analysis and testing a practical hot gas ceramic barrier filter system that meets the performance and operational requirements of these advanced, solid fuel power generation cycles.

  7. Water washable stainless steel HEPA filter

    DOE Patents [OSTI]

    Phillips, Terrance D. (617 Chestnut Ct., Aiken, SC 29803)

    2001-01-01T23:59:59.000Z

    The invention is a high efficiency particulate (HEPA) filter apparatus and system, and method for assaying particulates. The HEPA filter provides for capture of 99.99% or greater of particulates from a gas stream, with collection of particulates on the surface of the filter media. The invention provides a filter system that can be cleaned and regenerated in situ.

  8. Spatial filters for high power lasers

    DOE Patents [OSTI]

    Erlandson, Alvin Charles; Bayramian, Andrew James

    2014-12-02T23:59:59.000Z

    A spatial filter includes a first filter element and a second filter element overlapping with the first filter element. The first filter element includes a first pair of cylindrical lenses separated by a first distance. Each of the first pair of cylindrical lenses has a first focal length. The first filter element also includes a first longitudinal slit filter positioned between the first pair of cylindrical lenses. The second filter element includes a second pair of cylindrical lenses separated by a second distance. Each of the second pair of cylindrical lenses has a second focal length. The second filter element also includes a second longitudinal slit filter positioned between the second pair of cylindrical lenses.

  9. Active dc filter for HVDC systems

    SciTech Connect (OSTI)

    Zhang, W. (Royal Inst. of Tech., Stockholm (Sweden)); Asplund, G.

    1994-01-01T23:59:59.000Z

    This article is a case history of the installation of active dc filters for high-performance, low-cost harmonics filtering at the Lindome converter station in the Konti-Skan 2 HVDC transmission link between Denmark and Sweden. The topics of the article include harmonics, interference, and filters, Lindome active dc filter, active dc filter design, digital signal processor, control scheme, protection and fault monitoring, and future applications.

  10. How to Submit a 2014 ERCAP Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC HistoryVeteransto get a NERSC accountSubmit a

  11. Property:Date Submitted | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformationInyoCoolingTowerWaterUseSummerConsumed Jump to:DOEInvolve Jump to:DtAdd JumpSubmitted

  12. Submitting Course Completion Materials | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystalline Gallium Oxide ThinIon Cooling andStudying Ames FireSubmitting

  13. Submitting Organization Hongyou Fan Sandia National Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (Newport NewsStyle  2007 R&D 100 Award

  14. Filter systems for IGCC applications

    SciTech Connect (OSTI)

    Bevan, S.; Gieger, R.; Sobel, N.; Johnson, D.

    1995-11-01T23:59:59.000Z

    The objectives of this program were to identify metallic filter medium to be utilized in the Integrated Gasification Combined Cycle process (IGCC). In IGCC processes utilizing high efficiency desulfurizing technology, the traditional corrosion attack, sulfidation, is minimized so that metallic filters are viable alternatives over ceramic filters. Tampa Electric Company`s Polk Power Station is being developed to demonstrate Integrated Gasification Combined Cycle technology. The Pall Gas Solid Separation (GSS) System is a self cleaning filtration system designed to remove virtually all particulate matter from gas streams. The heart of the system is the filter medium used to collect the particles on the filter surface. The medium`s filtration efficiency, uniformity, permeability, voids volume, and surface characteristics are all important to establishing a permeable permanent cake. In-house laboratory blowback tests, using representative full scale system particulate, were used to confirm the medium selection for this project. Test elements constructed from six alloys were supplied for exposure tests: PSS 310SC (modified 310S alloy); PSS 310SC heat treated; PSS 310SC-high Cr; PSS 310SC-high Cr heat treated; PSS Hastelloy X; and PSS Hastelloy X heat treated.

  15. Radiant zone heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-12-27T23:59:59.000Z

    A system includes a particulate matter (PM) filter including an upstream end for receiving exhaust gas and a downstream end. A radiant zoned heater includes N zones, where N is an integer greater than one, wherein each of the N zones includes M sub-zones, where M is an integer greater than or equal to one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones, restricts exhaust gas flow in a portion of the PM filter that corresponds to the selected one of the N zones, and deactivates non-selected ones of the N zones.

  16. Hot gas cross flow filtering module

    DOE Patents [OSTI]

    Lippert, Thomas E. (Murrysville Boro, PA); Ciliberti, David F. (Murrysville Boro, PA)

    1988-01-01T23:59:59.000Z

    A filter module for use in filtering particulates from a high temperature gas has a central gas duct and at least one horizontally extending support mount affixed to the duct. The support mount supports a filter element thereon and has a chamber therein, which communicates with an inner space of the duct through an opening in the wall of the duct, and which communicates with the clean gas face of the filter element. The filter element is secured to the support mount over an opening in the top wall of the support mount, with releasable securement provided to enable replacement of the filter element when desired. Ceramic springs may be used in connection with the filter module either to secure a filter element to a support mount or to prevent delamination of the filter element during blowback.

  17. Electric filter with movable belt electrode

    DOE Patents [OSTI]

    Bergman, W.

    1983-09-20T23:59:59.000Z

    A method and apparatus for removing airborne contaminants entrained in a gas or airstream includes an electric filter characterized by a movable endless belt electrode, a grounded electrode, and a filter medium sandwiched there between. Inclusion of the movable, endless belt electrode provides the driving force for advancing the filter medium through the filter, and reduces frictional drag on the filter medium, thereby permitting a wide choice of filter medium materials. Additionally, the belt electrode includes a plurality of pleats in order to provide maximum surface area on which to collect airborne contaminants. 4 figs.

  18. A rigid porous filter and filtration method

    SciTech Connect (OSTI)

    Chiang, Ta-Kuan; Straub, Douglas, Straub L.; Dennis, Richard A.

    1998-12-01T23:59:59.000Z

    The present invention involves a porous rigid filter comprising a plurality of concentric filtration elements having internal flow passages and forming external flow passages there between. The present invention also involves a pressure vessel containing the filter for the removal of particulate from high pressure particulate containing gases, and further involves a method for using the filter to remove such particulate. The present filter has the advantage of requiring fewer filter elements due to the high surface area- to-volume ratio provided by the filter, requires a reduced pressure vessel size, and exhibits enhanced mechanical design properties, improved cleaning properties, configuration options, modularity and ease of fabrication.

  19. Kansas City Plant submits productivity savings under share-in...

    National Nuclear Security Administration (NNSA)

    submits productivity savings under share-in-savings program | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  20. Improving Filtering for Computer Graphics

    E-Print Network [OSTI]

    Manson, Josiah

    2014-04-30T23:59:59.000Z

    When drawing images onto a computer screen, the information in the scene is typically more detailed than can be displayed. Most objects, however, will not be close to the camera, so details have to be filtered out, or anti-aliased, when the objects...

  1. ADVANCED HOT GAS FILTER DEVELOPMENT

    SciTech Connect (OSTI)

    RICHARD A. WAGNER

    1998-09-04T23:59:59.000Z

    This report describes the fabrication and testing of continuous fiber ceramic composite (CFCC) based hot gas filters. The fabrication approach utilized a modified filament winding method that combined both continuous and chopped fibers into a novel microstructure. The work was divided into five primary tasks. In the first task, a preliminary set of compositions was fabricated in the form of open end tubes and characterized. The results of this task were used to identify the most promising compositions for sub-scale filter element fabrication and testing. In addition to laboratory measurements of permeability and strength, exposure testing in a coal combustion environment was performed to asses the thermo-chemical stability of the CFCC materials. Four candidate compositions were fabricated into sub-scale filter elements with integral flange and a closed end. Following the 250 hour exposure test in a circulating fluid bed combustor, the retained strength ranged from 70 t 145 percent of the as-fabricated strength. The post-test samples exhibited non-catastrophic failure behavior in contrast to the brittle failure exhibited by monolithic materials. Filter fabrication development continued in a filter improvement and cost reduction task that resulted in an improved fiber architecture, the production of a net shape flange, and an improved low cost bond. These modifications were incorporated into the process and used to fabricate 50 full-sized filter elements for testing in demonstration facilities in Karhula, Finland and at the Power Systems Development Facility (PSDF) in Wilsonville, AL. After 581 hours of testing in the Karhula facility, the elements retained approximately 87 percent of their as-fabricated strength. In addition, mechanical response testing at Virginia Tech provided a further demonstration of the high level of strain tolerance of the vacuum wound filter elements. Additional testing in the M. W. Kellogg unit at the PSDF has accumulated over 1800 hours of coal firing at temperatures of 760 C including a severe thermal upset that resulted in the failure of several monolithic oxide elements. No failures of any kind have been reported for the MTI CFCC elements in either of these test campaigns. Additional testing is planned at the M. W. Kellogg unit and Foster Wheeler unit at the PSDF over the next year in order to qualify for consideration for the Lakeland PCFB. Process scale-up issues have been identified and manufacturing plans are being evaluated to meet the needs of future demand.

  2. Automatic tuning of continuous-time filters

    E-Print Network [OSTI]

    Sumesaglam, Taner

    2004-11-15T23:59:59.000Z

    Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed...

  3. A Brief History of Filter Methods

    E-Print Network [OSTI]

    2006-10-10T23:59:59.000Z

    Oct 9, 2006 ... The transition of filter methods to fast local convergence had been an .... iterations. This strategy allows the filter to accept points that would otherwise be rejected. ..... Department of Energy, under Contract W-31-109-ENG-38.

  4. Waveguide Filter Tutorial Julius O. Smith III

    E-Print Network [OSTI]

    Smith III, Julius Orion

    Waveguide Filter Tutorial Julius O. Smith III Center for Computer Research in Music and Acoustics was adapted from the conference paper "Waveguide Filter Tutorial," by J.O. Smith, Proceedings

  5. An energy recovery filter for HVDC systems

    SciTech Connect (OSTI)

    Jiang, X.; Gole, A.M. (Univ. of Manitoba, Winnipeg (Canada). Dept. of Electrical and Computer Engineering)

    1994-01-01T23:59:59.000Z

    The paper investigates the use of a novel filter arrangement for eliminating harmonic instability. The CIGRE benchmark model is selected as the base system. Presented in the paper is an example of harmonic instability which is first eliminated using a conventional low Q filter. Subsequently an energy recovery filter (ER-filter) replaces the conventional low Q filter. It is shown that the ER-filter provides similar performance with a fraction of the power loss when compared with a low Q filter. The dynamic performance of the ER-filter is also demonstrated via the simulations of system start-up and faults. The tool used for this investigation is an electromagnetic transient simulation program.

  6. RENDERING FILTERS FOR CONTROLLING DETAIL AND

    E-Print Network [OSTI]

    RENDERING FILTERS FOR CONTROLLING DETAIL AND CREATING EFFECTS CHRISTOPHER ROBERT DECORO may be unified under the general theme of the rendering filter. Generally stated, such a filter is a passive, stateless operator that acts upon a decomposition of terms in the rendering equation

  7. Electrically heated particulate filter restart strategy

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-07-12T23:59:59.000Z

    A control system that controls regeneration of a particulate filter is provided. The system generally includes a propagation module that estimates a propagation status of combustion of particulate matter in the particulate filter. A regeneration module controls current to the particulate filter to re-initiate regeneration based on the propagation status.

  8. ELECTROSTATICALLY ENHANCED BARRIER FILTER COLLECTION

    SciTech Connect (OSTI)

    John Erjavec; Michael D. Mann; Ryan Z. Knutson; Michael L. Swanson; Michael E. Collings

    2003-06-01T23:59:59.000Z

    This work was performed through the University of North Dakota (UND) Chemical Engineering Department with assistance from UND's Energy & Environmental Research Center. This research was undertaken in response to the U.S. Department of Energy Federal Technology Center Program Solicitation No. DE-PS26-99FT40479, Support of Advanced Coal Research at U.S. Universities and Colleges. Specifically, this research was in support of the UCR Core Program and addressees Topic 1, Improved Hot-Gas Contaminant and Particulate Removal Techniques, introducing an advanced design for particulate removal. Integrated gasification combined cycle (IGCC) offers the potential for very high efficiency and clean electric generation. In IGCC, the product gas from the gasifier needs to be cleaned of particulate matter to avoid erosion and high-temperature corrosion difficulties arising with the turbine blades. Current methods involve cooling the gases to {approx}100 C to condense alkalis and remove sulfur and particulates using conventional scrubber technology. This ''cool'' gas is then directed to a turbine for electric generation. While IGCC has the potential to reach efficiencies of over 50%, the current need to cool the product gas for cleaning prior to firing it in a turbine is keeping IGCC from reaching its full potential. The objective of the current project was to develop a highly reliable particulate collector system that can meet the most stringent turbine requirements and emission standards, can operate at temperatures above 1500 F, is applicable for use with all U.S. coals, is compatible with various sorbent injection schemes for sulfur and alkali control, can be integrated into a variety of configurations for both pressurized gasification and combustion, increases allowable face velocity to reduce filter system capital cost, and is cost-competitive with existing technologies. The collector being developed is a new concept in particulate control called electrostatically enhanced barrier filter collection (EBFC). This concept combines electrostatic precipitation (ESP) with candle filters in a single unit. Similar technology has been recently proven on a commercial scale for atmospheric applications, but needed to be tested at high temperatures and pressures. The synergy obtained by combining the two control technologies into a single system should actually reduce filter system capital and operating costs and make the system more reliable. More specifically, the ESP is expected to significantly reduce candle filter load and also to limit ash reintrainment, allowing for full recovery of baseline pressure drop during backpulsing of the filters.

  9. SUBMITTED TO: THE D.C. WATER RESOURCES RESEARCH CENTER

    E-Print Network [OSTI]

    District of Columbia, University of the

    chemicals and heavy metals such as lead'. Several published reports have suggested that D.C. public waterMARCH 1996 SUBMITTED TO: THE D.C. WATER RESOURCES RESEARCH CENTER UNIVERSITY OF THE DISTRICT OF COLUMBIA WASHINGTON, D.C. 20008 SUBMITTED BY: DR. KWAMENA OCRAN LEAD IN RESIDENTIAL DRINKING WATER: RISK

  10. Graduation Checklist 1. Submit study program (form 1)

    E-Print Network [OSTI]

    Sidorova, Natalia

    the graduation regulations before actually starting your graduation project available at http://w3.win.tue.nl/nl/onderwijs/reglementen/ 3. Submit your graduation plan (form 2) before actually starting your graduation project formGraduation Checklist 1. Submit study program (form 1) if you have accumulated 40-50 credits form

  11. White Papers Submitted to the Technology Innovation Program

    E-Print Network [OSTI]

    Magee, Joseph W.

    White Papers Submitted to the Technology Innovation Program interested parties to submit white papers describing an area of critical national need and how those needs-risk, high-reward R&D. White papers could discuss any area of critical national need of interest

  12. Filter for a drill string

    DOE Patents [OSTI]

    Hall, David R. (Provo, UT); Pixton, David S. (Lehi, UT); Briscoe, Michael (Lehi, UT); McPherson, James (Sandy, UT)

    2007-12-04T23:59:59.000Z

    A filter for a drill string comprises a perforated receptacle having an open end and a perforated end and first and second mounting surfaces are adjacent the open end. A transmission element is disposed within each of the first and second mounting surfaces. A capacitor may modify electrical characteristics of an LC circuit that comprises the transmission elements. The respective transmission elements are in communication with each other and with a transmission network integrated into the drill string. The transmission elements may be inductive couplers, direct electrical contacts, or optical couplers. In some embodiments of the present invention, the filter comprises an electronic component. The electronic component may be selected from the group consisting of a sensor, a router, a power source, a clock source, a repeater, and an amplifier.

  13. Ceramic hot-gas filter

    DOE Patents [OSTI]

    Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

    1999-01-01T23:59:59.000Z

    A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

  14. Ceramic hot-gas filter

    DOE Patents [OSTI]

    Connolly, E.S.; Forsythe, G.D.; Domanski, D.M.; Chambers, J.A.; Rajendran, G.P.

    1999-05-11T23:59:59.000Z

    A ceramic hot-gas candle filter is described having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during back pulse cleaning and is resistant to chemical degradation at high temperatures.

  15. Filter for isotopic alteration of mercury vapor

    DOE Patents [OSTI]

    Grossman, Mark W. (Belmont, MA); George, William A. (Gloucestor, MA)

    1989-01-01T23:59:59.000Z

    A filter for enriching the .sup.196 Hg content of mercury, including a reactor, a low pressure electric discharge lamp containing a fill of mercury and an inert gas. A filter is arranged concentrically around the lamp. The reactor is arranged around said filter, whereby radiation from said lamp passes through the filter and into said reactor. The lamp, the filter and the reactor are formed of quartz, and are transparent to ultraviolet light. The .sup.196 Hg concentration in the mercury fill is less than that which is present in naturally occurring mercury, that is less than about 0.146 atomic weight percent. Hydrogen is also included in the fill and serves as a quenching gas in the filter, the hydrogen also serving to prevent disposition of a dark coating on the interior of the filter.

  16. Filter for isotopic alteration of mercury vapor

    DOE Patents [OSTI]

    Grossman, M.W.; George, W.A.

    1989-06-13T23:59:59.000Z

    A filter is described for enriching the [sup 196]Hg content of mercury, including a reactor, a low pressure electric discharge lamp containing a fill of mercury and an inert gas. A filter is arranged concentrically around the lamp. The reactor is arranged around said filter, whereby radiation from said lamp passes through the filter and into said reactor. The lamp, the filter and the reactor are formed of quartz, and are transparent to ultraviolet light. The [sup 196]Hg concentration in the mercury fill is less than that which is present in naturally occurring mercury, that is, less than about 0.146 atomic weight percent. Hydrogen is also included in the fill and serves as a quenching gas in the filter, the hydrogen also serving to prevent disposition of a dark coating on the interior of the filter. 9 figs.

  17. Method and apparatus for filtering gas with a moving granular filter bed

    DOE Patents [OSTI]

    Brown, Robert C. (Ames, IA); Wistrom, Corey (Ames, IA); Smeenk, Jerod L. (Ames, IA)

    2007-12-18T23:59:59.000Z

    A method and apparatus for filtering gas (58) with a moving granular filter bed (48) involves moving a mass of particulate filter material (48) downwardly through a filter compartment (35); tangentially introducing gas into the compartment (54) to move in a cyclonic path downwardly around the moving filter material (48); diverting the cyclonic path (58) to a vertical path (62) to cause the gas to directly interface with the particulate filter material (48); thence causing the gas to move upwardly through the filter material (48) through a screened partition (24, 32) into a static upper compartment (22) of a filter compartment for exodus (56) of the gas which has passed through the particulate filter material (48).

  18. ADVANCED HOT GAS FILTER DEVELOPMENT

    SciTech Connect (OSTI)

    Matthew R. June; John L. Hurley; Mark W. Johnson

    1999-04-01T23:59:59.000Z

    Iron aluminide hot gas filters have been developed using powder metallurgy techniques to form seamless cylinders. Three alloys were short-term corrosion tested in simulated IGCC atmospheres with temperatures between 925 F and 1200 F with hydrogen sulfide concentrations ranging from 783 ppm{sub v} to 78,300 ppm{sub v}. Long-term testing was conducted for 1500 hours at 925 F with 78,300 ppm{sub v}. The FAS and FAL alloys were found to be corrosion resistant in the simulated environments. The FAS alloy has been commercialized.

  19. Multi-Canister overpack internal HEPA filters

    SciTech Connect (OSTI)

    SMITH, K.E.

    1998-11-03T23:59:59.000Z

    The rationale for locating a filter assembly inside each Multi-Canister Overpack (MCO) rather than include the filter in the Cold Vacuum Drying (CVD) process piping system was to eliminate the potential for contamination to the operators, processing equipment, and the MCO. The internal HEPA filters provide essential protection to facility workers from alpha contamination, both external skin contamination and potential internal depositions. Filters installed in the CVD process piping cannot mitigate potential contamination when breaking the process piping connections. Experience with K-Basin material has shown that even an extremely small release can result in personnel contamination and costly schedule disruptions to perform equipment and facility decontamination. Incorporating the filter function internal to the MCO rather than external is consistent with ALARA requirements of 10 CFR 835. Based on the above, the SNF Project position is to retain the internal HEPA filters in the MCO design.

  20. FILTER COMPONENT ASSESSMENT--CERAMIC CANDLES--

    SciTech Connect (OSTI)

    M.A. Alvin

    2004-04-23T23:59:59.000Z

    Efforts at Siemens Westinghouse Power Corporation (SWPC) have been focused on development of hot gas filter systems as an enabling technology for advanced coal and biomass-based gas turbine power generation applications. SWPC has been actively involved in the development of advanced filter materials and component configuration, has participated in numerous surveillance programs characterizing the material properties and microstructure of field tested filter elements, and has undertaken extended, accelerated filter life testing programs. This report summarizes the results of SWPC's filter component assessment efforts, identifying the performance and stability of porous monolithic, fiber reinforced, and filament wound ceramic hot gas candle filters, potentially for {ge}3 years of viable pressurized fluidized-bed combustion (PFBC) service operating life.

  1. Face crack reduction strategy for particulate filters

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2012-01-31T23:59:59.000Z

    A system comprises a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and at least one portion. A control module initiates combustion of PM in the PM filter using a heater and selectively adjusts oxygen levels of the exhaust gas to adjust a temperature of combustion adjacent to the at least one portion of the PM filter. A method comprises providing a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and at least one portion; initiating combustion of PM in the PM filter using a heater; selectively adjusting oxygen levels of the exhaust gas to adjust a temperature of combustion adjacent to the at least one portion of the PM filter.

  2. Categorical Exclusion Determination Form It Submit by E-_

    Broader source: Energy.gov (indexed) [DOE]

    It Submit by E- I'llail - Proposed Action Title: (0672- 1610) Eaton Corporation - Highly Efficient, Nea r-Isothermal Liquid-Piston Compressor fo r Low Cost At-Home Natural Gas...

  3. Abstract Submitted for the DPP07 Meeting of

    E-Print Network [OSTI]

    Hudson, Stuart

    Abstract Submitted for the DPP07 Meeting of The American Physical Society Sorting Category: 5-interface periodic-cylinder configuration. In this work, we per- form a stability scan over pressure and for a two

  4. ,~ Abstract Submitted to 1997 Denver X-Ray Conference

    E-Print Network [OSTI]

    Brookhaven National Laboratory

    ,~ Abstract Submitted to 1997 Denver X-Ray Conference Denver, Colorado -August 4-8, 1997 BNL-.64346 being distributed through the entire volume of the particle needs further investigation. *Work supported

  5. Abstract Submitted for the DPP97 Meeting of

    E-Print Network [OSTI]

    Hammett, Greg

    Abstract Submitted for the DPP97 Meeting of The American Physical Society Sorting Category: 5 solve these problems. 1 This work supported by DoE Contract DE­AC02­76CH03073. Prefer Oral Session X

  6. ab1157 cultures submitted: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Physics Websites Summary: Submitted to ISQED 2012 Page 16 Tutorial Proposal Power-Aware Testing and Test Strategies for Low: Full-day (6-hours) or Half-day (3 hours)...

  7. Zone heated diesel particulate filter electrical connection

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI)

    2010-03-30T23:59:59.000Z

    An electrical connection system for a particulate filter is provided. The system includes: a particulate filter (PF) disposed within an outer shell wherein the PF is segmented into a plurality of heating zones; an outer mat disposed between the particulate filter and the outer shell; an electrical connector coupled to the outer shell of the PF; and a plurality of printed circuit connections that extend along the outer surface of the PF from the electrical connector to the plurality of heating zones.

  8. Diesel particulate filter with zoned resistive heater

    SciTech Connect (OSTI)

    Gonze, Eugene V [Pinckney, MI

    2011-03-08T23:59:59.000Z

    A diesel particulate filter assembly comprises a diesel particulate filter (DPF) and a heater assembly. The DPF filters a particulate from exhaust produced by an engine. The heater assembly has a first metallic layer that is applied to the DPF, a resistive layer that is applied to the first metallic layer, and a second metallic layer that is applied to the resistive layer. The second metallic layer is etched to form a plurality of zones.

  9. DC side filters for multiterminal HVDC systems

    SciTech Connect (OSTI)

    Shore, N.L.; Adamson, K.; Bard, P. [and others] [and others

    1996-10-01T23:59:59.000Z

    Multiterminal HVDC systems present challenges in the specification and design of suitable dc side filtering. This document examines the existing experience and addresses the particular technical problems posed by multiterminal systems. The filtering requirements of small taps are discussed, as is the potential use of active filters. Aspects of calculation and design are considered and recommendations made to guide the planners and designers of future multiterminal schemes.

  10. Two Wien Filter Spin Flipper

    SciTech Connect (OSTI)

    Grames, J M; Benesch, J F; Clark, J; Hansknecht, J; Kazimi, R; Machie, D; Poelker, M; Stutzman, M L; Suleiman, R

    2011-03-01T23:59:59.000Z

    A new 4pi spin manipulator composed of two Wien filters oriented orthogonally and separated by two solenoids has been installed at the CEBAF/Jefferson Lab photoinjector. The new spin manipulator is used to precisely set the electron spin direction at an experiment in any direction (in or out of plane of the accelerator) and provides the means to reverse, or flip, the helicity of the electron beam on a daily basis. This reversal is being employed to suppress systematic false asymmetries that can jeopardize challenging parity violation experiments that strive to measure increasingly small physics asymmetries [*,**,***]. The spin manipulator is part of the ultra-high vacuum polarized electron source beam line and has been successfully operated with 100keV and 130keV electron beam at high current (>100 microAmps). A unique feature of the device is that spin-flipping requires only the polarity of one solenoid magnet be changed. Performance characteristics of the Two Wien Filter Spin Flipper will be summarized.

  11. DEVELOPMENT OF AG-1 SECTION FI ON METAL MEDIA FILTERS - 9061

    SciTech Connect (OSTI)

    Adamson, D; Charles A. Waggoner, C

    2008-12-09T23:59:59.000Z

    Development of a metal media standard (FI) for ASME AG-1 (Code on Nuclear Air and Gas Treatment) has been under way for almost ten years. This paper will provide a brief history of the development process of this section and a detailed overview of its current content/status. There have been at least two points when dramatic changes have been made in the scope of the document due to feedback from the full Committee on Nuclear Air and Gas Treatment (CONAGT). Development of the proposed section has required resolving several difficult issues associated with scope; namely, filtering efficiency, operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality control/acceptance testing. A proposed version of Section FI is currently undergoing final revisions prior to being submitted for balloting. The section covers metal media filters of filtering efficiencies ranging from medium (less than 99.97%) to high (99.97% and greater). Two different types of high efficiency filters are addressed; those units intended to be a direct replacement of Section FC fibrous glass HEPA filters and those that will be placed into newly designed systems capable of supporting greater static pressures and differential pressures across the filter elements. Direct replacements of FC HEPA filters in existing systems will be required to meet equivalent qualification and testing requirements to those contained in Section FC. A series of qualification and quality assurance test methods have been identified for the range of filtering efficiencies covered by this proposed standard. Performance characteristics of sintered metal powder vs. sintered metal fiber media are dramatically different with respect to parameters like differential pressures and rigidity of the media. Wide latitude will be allowed for owner specification of performance criteria for filtration units that will be placed into newly designed systems. Such allowances will permit use of the most appropriate metal media for a system as specified by the owner with respect to material of manufacture, media velocity, system maximum static pressure, maximum differential pressure across the filter, and similar parameters.

  12. Filters and Components With Inductance Cancellation

    E-Print Network [OSTI]

    Neugebauer, Timothy C.

    Electrical filters are important for attenuating electrical ripple, eliminating electromagnetic interference (EMI) and susceptibility, improving power quality, and minimizing electromagnetic signature. Capacitors are ...

  13. Advanced Particulate Filter Technologies for Direct Injection...

    Broader source: Energy.gov (indexed) [DOE]

    Public * Continuing efforts for further CO 2 and PN reduction create a challenging environment for vehicles equipped with DI gasoline engines * Gasoline particulate filters...

  14. In-place filter testing summary

    SciTech Connect (OSTI)

    Ortiz, J.P.; Garcia, E.D.; Ortega, J.M.

    1988-03-01T23:59:59.000Z

    The most common method of identifying particle penetration through a filter or adsorber system is through the performance of a periodic penetration test, i.e., in-place test or leak test using an aerosol or gas vapor to challenge the filter or adsorber system. The aerosol is usually formed by vaporization of a liquid, di-2(ethelhexyl sebacate) (DEHS), and allowed to condense to form liquid particles of a certain size and distribution. The gas vapor is formed by vaporization of Freon 11 liquid. The periodic penetration test, although conducted annually, can and has been demonstrated to show the beginning degradation of a filter or adsorber system. Other evidence of penetration can include detection of radiation downstream of the filter system or the existence of an unusually low pressure drop across the filter, i.e., torn filter, etc. However, these kinds of occurrences show up instantaneously and could release radioactive material to the atmosphere before the systems could be shut down. When a filter system fails the in--place test or is showing evidence of.filter or component degradation, corrective measures are put into place in order to return,the system back to its best operating condition. This report presents a summary of all filter tests.

  15. Continuous air monitor filter changeout apparatus

    DOE Patents [OSTI]

    Rodgers, John C. (Santa Fe, NM)

    2008-07-15T23:59:59.000Z

    An apparatus and corresponding method for automatically changing out a filter cartridge in a continuous air monitor. The apparatus includes: a first container sized to hold filter cartridge replacements; a second container sized to hold used filter cartridges; a transport insert connectively attached to the first and second containers; a shuttle block, sized to hold the filter cartridges that is located within the transport insert; a transport driver mechanism means used to supply a motive force to move the shuttle block within the transport insert; and, a control means for operating the transport driver mechanism.

  16. Electrically-Assisted Diesel Particulate Filter Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation pm041lance2011p.pdf More Documents & Publications Electrically-Assisted Diesel Particulate Filter Regeneration Substrate Studies of an Electrically-Assisted Diesel...

  17. Sexually antithetical song structure in a duet singing David M. Logue1,2,3)

    E-Print Network [OSTI]

    Rendall, Drew

    opportunity to test the hypothesis that signal degradation during transmission selects for divergent signal structure. Keywords: Darwin's Principle of Antithesis, bird song, female song, acoustic adaptation by processes beyond the sender's control: signals degrade during transmission (Morton, 1975) and both senders

  18. Advances in Filter Miniaturization and Design/Analysis of RF MEMS Tunable Filters

    E-Print Network [OSTI]

    Sekar, Vikram

    2012-10-19T23:59:59.000Z

    The main purpose of this dissertation was to address key issues in the design and analysis of RF/microwave filters for wireless applications. Since RF/microwave filters are one of the bulkiest parts of communication systems, their miniaturization...

  19. Filtering Noisy ECG Signals Using the Extended Kalman Filter Based on a Modified Dynamic ECG Model

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Filtering Noisy ECG Signals Using the Extended Kalman Filter Based on a Modified Dynamic ECG Model for the filtering of noisy ECG signals. The method is based on a modified nonlinear dynamic model, previously introduced for the generation of synthetic ECG signals. An automatic parameter selection method has also been

  20. OTA based active filter design

    E-Print Network [OSTI]

    Ferrell, John Steven

    2012-06-07T23:59:59.000Z

    for the circuit of Fig, 17 (p, 29) was ')bown in bq. (4. $'6) to be gml gm A = 2 s ClC2 sClgmZ gm gm 1 2 (4. 40) 42 The fourth-order system shown in 1'ig. 24 has the function A gm1gm2 CIC2 gm2 gm1gm2 L '" c'CC 2 1 2 gm&gm4 CI 2 (4. 41) I... and low pass filter using the circuit of Fig. 6 Thc t&an&i pass transfer function was of tne for? Khls Ar s +(a+b-KhZ)s+ab (2 4) K = n C where G = GZ+G3 G 1 (2. 5) a = (Gy+G) / C] (2. 6) b = GG4 / C(G+G4) (2. 7) h] = GZ/g where g = G+G4 w...

  1. Automatic tuning for linearly tunable filter

    E-Print Network [OSTI]

    Huang, Sung-Ling

    2004-09-30T23:59:59.000Z

    A new tuning scheme for linearly tunable high-Q filters is proposed. The tuning method is based on using the phase information for both frequency and Q factor tuning. There is no need to find out the relationship between a filter's passband...

  2. A fuzzy-tuned adaptive Kalman filter

    E-Print Network [OSTI]

    Painter, John H.; Young Hwan Lho

    1993-12-01T23:59:59.000Z

    In this paper, fuzzy processing is applied to the adaptive Kalman filter. The filter gain coefficients are adapted over a 50 dB range of unknown signal/noise dynamics, using fuzzy membership functions. Specific simulation results are shown for a...

  3. Method and apparatus for PM filter regeneration

    DOE Patents [OSTI]

    Opris, Cornelius N. (Peoria, IL); Verkiel, Maarten (Metamora, IL)

    2006-01-03T23:59:59.000Z

    A method and apparatus for initiating regeneration of a particulate matter (PM) filter in an exhaust system in an internal combustion engine. The method and apparatus includes determining a change in pressure of exhaust gases passing through the PM filter, and responsively varying an opening of an intake valve in fluid communication with a combustion chamber.

  4. Low Latency Stochastic Filtering Software Firewall Architecture

    E-Print Network [OSTI]

    Ghoshal, Pritha

    2012-08-29T23:59:59.000Z

    . . . . . . . . . . . . . . . . . . . . . 29 V METHODOLOGY . . . . . . . . . . . . . . . . . . . . . . . . . 31 VI RESULTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 v VI-A. Incremental Cleared Bloom Filter . . . . . . . . . . . 37 VI-A.1. Latency... . . . . . . . . . . . . . . . . . . . . . . 37 VI-A.2. Bandwidth . . . . . . . . . . . . . . . . . . . . 39 VI-A.3. Reduction in Dropped Packets . . . . . . . . . 40 VI-A.4. False Positive Rate . . . . . . . . . . . . . . . . 42 VI-B. Cold Cleared Bloom Filter...

  5. Active imaging system with Faraday filter

    DOE Patents [OSTI]

    Snyder, J.J.

    1993-04-13T23:59:59.000Z

    An active imaging system has a low to medium powered laser transmitter and receiver wherein the receiver includes a Faraday filter with an ultranarrow optical bandpass and a bare (nonintensified) CCD camera. The laser is locked in the vicinity of the passband of the Faraday filter. The system has high sensitivity to the laser illumination while eliminating solar background.

  6. Removal of a Permanent IVC Filter

    SciTech Connect (OSTI)

    Kumar, Bangalore C. Anil [Queen's Medical Centre, Department of Radiology (United Kingdom)], E-mail: anil.kumar@doctors.org.uk; Chakraverty, Sam; Zealley, Ian [Ninewells Hospital, Department of Radiology (United Kingdom)

    2006-02-15T23:59:59.000Z

    Inferior vena cava (IVC) filters are increasingly used for prevention of life-threatening pulmonary emboli in patients who have contraindications to anticoagulation therapy. We report a case of the removal of a permanent IVC filter, which was inadvertently inserted due to an incorrect ultrasound report.

  7. Thermovoltaic semiconductor device including a plasma filter

    DOE Patents [OSTI]

    Baldasaro, Paul F. (Clifton Park, NY)

    1999-01-01T23:59:59.000Z

    A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

  8. Digital filtering in a disease detection system

    SciTech Connect (OSTI)

    Brown, R.R.

    1983-01-01T23:59:59.000Z

    A low-pass, nonrecursive digital filter has been designed to process data in an automated enzyme immunoassay system. The software implemented filter has been installed in the Intel 80/10 system controller. A low-speed sample rate of three samples per second allowed the filter algorithm to be programmed in the high-level FORTRAN language with a resultant execution speed of 0.6 seconds per day array. Fourier techniques are used to derive a zero phase shift filter algorithm from a frequency domain prototype. The resulting alogrithm is modified by a Hamming window to reduce transients and Gibbs phenomenon oscillations. Observations on the effectiveness of the filter under full system operation indicate a 90% data recovery rate.

  9. Comment submitted by Traulsen regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Traulsen regarding the Energy Star Verification Testing Program

  10. Comment submitted by Consumers Union regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Consumers Union regarding the Energy Star Verification Testing Program

  11. Comment submitted by Whirlpool Corporation regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Whirlpool Corporation regarding the Energy Star Verification Testing Program

  12. Microwave-Regenerated Diesel Exhaust Particulate Filter

    SciTech Connect (OSTI)

    Nixdorf, Richard D. (Industrial Ceramic Solution, LLC); Green, Johney Boyd; Story, John M.; Wagner, Robert M. (Oak Ridge National Laboratory)

    2001-03-05T23:59:59.000Z

    Development of a microwave-regenerated particulate filter system has evolved from bench scale work to actual diesel engine experimentation. The filter system was initially evaluated on a stationary mounted 1.2-L diesel engine and was able to remove a significant amount of carbon particles from the exhaust. The ability of the microwave energy to regenerate or clean the filter was also demonstrated on this engine under idle conditions. Based on the 1.2-L experiments, improvements to the filter design and materials were implemented and the system was re-evaluated on a vehicle equipped with a 7.3-L diesel engine. The 7.3-L engine was selected to achieve heavy filter loading in a relatively short period of time. The purpose of these experiments was to evaluate filter-loading capacity, power requirements for regeneration, and filter regeneration efficiency. A more detailed evaluation of the filter was performed on a stationary mounted 1.9-L diesel engine. The effect of exhaust flow rate, loading, transients, and regeneration on filter efficiency was evaluated with this setup. In addition, gaseous exhaust emissions were investigated with and without an oxidation catalyst on the filter cartridge during loading and regeneration. (SAE Paper SAE-2001-01-0903 2001 SAE International. This paper is published on this website with permission from SAE International. As a user of this website, you are permitted to view this paper on-line, download this pdf file and print one copy of this paper at no cost for your use only. The downloaded pdf file and printout of this SAE paper may not be copied, distributed or forwarded to others or for the use of others.)

  13. Method for reducing pressure drop through filters, and filter exhibiting reduced pressure drop

    DOE Patents [OSTI]

    Sappok, Alexander; Wong, Victor

    2014-11-18T23:59:59.000Z

    Methods for generating and applying coatings to filters with porous material in order to reduce large pressure drop increases as material accumulates in a filter, as well as the filter exhibiting reduced and/or more uniform pressure drop. The filter can be a diesel particulate trap for removing particulate matter such as soot from the exhaust of a diesel engine. Porous material such as ash is loaded on the surface of the substrate or filter walls, such as by coating, depositing, distributing or layering the porous material along the channel walls of the filter in an amount effective for minimizing or preventing depth filtration during use of the filter. Efficient filtration at acceptable flow rates is achieved.

  14. TESTING OF THE DUAL ROTARY FILTER SYSTEM

    SciTech Connect (OSTI)

    Herman, D.; Fowley, M.; Stefanko, D.

    2011-08-29T23:59:59.000Z

    The Savannah River National Laboratory (SRNL) installed and tested two hydraulically connected SpinTek rotary microfilter (RMF) units to determine the behavior of a multiple filter system. Both units were successfully controlled by a control scheme written in DELTA-V architecture by Savannah River Remediation (SRR) Process Control Engineering personnel. The control system was tuned to provide satisfactory response to changing conditions during the operation of the multi-filter system. Stability was maintained through the startup and shutdown of one of the filter units while the second was still in operation. The installation configuration originally proposed by the Small Colum Ion Exchange (SCIX) project of independent filter and motor mountings may be susceptible to vibration. Significant stiffening of the filter and motor mounts was required to minimize the vibration. Alignment of the motor to the filter was a challenge in this test configuration. The deployment configuration must be easy to manipulate and allow for fine adjustment. An analysis of the vibration signature of the test system identified critical speeds. Whether it corresponds to the resonance frequency of a rotor radial vibration mode that was excited by rotor unbalance is uncertain based upon the measurements. A relative motion series should be completed on the filter with the final shaft configuration to determine if the resonances exist in the final filter design. The instrumentation selected for deployment, including the concentrate discharge control valve and flow meters, performed well. Automation of the valve control integrated well with the control scheme and when used in concert with the other control variables, allowed automated control of the dual RMF system. The one area of concern with the instrumentation was the condition resulting when the filtrate flow meter operated with less than three gpm. This low flow was at the lower range of performance for the flow meter. This should not be an issue in deployment where the desired flow rate will be within the normal operating range of the meter. Testing demonstrated that the use of a flexible line for the filtrate discharge is highly desired at the outlet of the rotary union to transition to the system piping. Isolating the vibration from the rotary union will significantly improve the lifetime of the seals. Methods to monitor and isolate individual filters should be considered during deployment. The ability to diagnose issues and isolate individual filters would allow isolation prior to failure. Thus, filters may be cleaned or repaired instead of requiring complete replacement if the condition were to continue unnoticed. Isolating the filtrate line of each filter during startup will minimize the premature buildup of solids on the filter disks. Several tests have shown that the method of filter startup can improve performance lifetime of the filters. The installation must factor in an air inlet for the draining of a filter that does not involve a reverse flow through the filter disks. The reverse flow may cause deformation of the disks or may damage other components of the filters themselves.

  15. Multiple stage multiple filter hydrate store

    DOE Patents [OSTI]

    Bjorkman, H.K. Jr.

    1983-05-31T23:59:59.000Z

    An improved hydrate store for a metal halogen battery system is disclosed which employs a multiple stage, multiple filter means for separating the halogen hydrate from the liquid used in forming the hydrate. The filter means is constructed in the form of three separate sections which combine to substantially cover the interior surface of the store container. Exit conduit means is provided in association with the filter means for transmitting liquid passing through the filter means to a hydrate former subsystem. The hydrate former subsystem combines the halogen gas generated during the charging of the battery system with the liquid to form the hydrate in association with the store. Relief valve means is interposed in the exit conduit means for controlling the operation of the separate sections of the filter means, such that the liquid flow through the exit conduit means from each of the separate sections is controlled in a predetermined sequence. The three separate sections of the filter means operate in three discrete stages to provide a substantially uniform liquid flow to the hydrate former subsystem during the charging of the battery system. The separation of the liquid from the hydrate causes an increase in the density of the hydrate by concentrating the hydrate along the filter means. 7 figs.

  16. Measuring PM Distribution in a Catalyzed Particulate Filter using...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PM Distribution in a Catalyzed Particulate Filter using a Terahertz Wave Scanner Measuring PM Distribution in a Catalyzed Particulate Filter using a Terahertz Wave Scanner...

  17. Durability of Diesel Engine Particulate Filters (Agreement ID...

    Broader source: Energy.gov (indexed) [DOE]

    Durability of Diesel Engine Particulate Filters (Agreement ID:10461) Durability of Diesel Engine Particulate Filters (Agreement ID:10461) 2013 DOE Hydrogen and Fuel Cells Program...

  18. California ARB Verification Testing of the CBSTM Soot Filter...

    Broader source: Energy.gov (indexed) [DOE]

    and Manufactured by HUG Engineering in Switzerland - Rugged Design Using Silicon Carbide Filter Material - Relatively Low Backpressure - Access Ports for Filter Removal and...

  19. Precise attention filters for Weber contrast derived from centroid estimations

    E-Print Network [OSTI]

    Sperling, George

    Precise attention filters for Weber contrast derived from centroid estimations Department attention filters for Weber contrast derived from centroid estimations. Journal of Vision, 10(10):20, 1

  20. Diesel Soot Filter Characterization and Modeling for Advanced...

    Broader source: Energy.gov (indexed) [DOE]

    Publications Diesel Soot Filter Characterization and Modeling for Advanced Substrates (CRADA with DOW Automotive) Diesel Soot Filter Characterization and Modeling for Advanced...

  1. Design of Water Filter for Third World Countries

    E-Print Network [OSTI]

    Sun, Yu

    Research &Responsibilities Sections Written Reverse osmosis filter research Acknowledgements Slow sand.2 Reverse Osmosis Filters 12.0 Recommendations _______________ Jingwen Wang #12;- 4 - Table of Contents List

  2. Non-Destructive Neutron Imaging to Analyze Particulate Filters...

    Broader source: Energy.gov (indexed) [DOE]

    Non-Destructive Neutron Imaging to Analyze Particulate Filters Non-Destructive Neutron Imaging to Analyze Particulate Filters Non-destructive, non-invasive imaging is being...

  3. Versatile Diesel Particulate Filter Cartridge Any Size, Any Shape...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Versatile Diesel Particulate Filter Cartridge Any Size, Any Shape Versatile Diesel Particulate Filter Cartridge Any Size, Any Shape Presentation given at DEER 2006, August 20-24,...

  4. Value Analysis of Alternative Diesel Particulate Filter (DPF...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value Analysis of Alternative Diesel Particulate Filter (DPF) Substrates for Future Diesel Aftertreatment Systems Value Analysis of Alternative Diesel Particulate Filter (DPF)...

  5. New Cordierite Diesel Particulate Filters for Catalyzed and Non...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cordierite Diesel Particulate Filters for Catalyzed and Non-Catalyzed Applications New Cordierite Diesel Particulate Filters for Catalyzed and Non-Catalyzed Applications 2003 DEER...

  6. CARB Verification of Catalyzed Diesel Particulate Filters for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CARB Verification of Catalyzed Diesel Particulate Filters for Emergency Generator Sets CARB Verification of Catalyzed Diesel Particulate Filters for Emergency Generator Sets 2005...

  7. U-252: Barracuda Web Filter Input Validation Flaws Permit Cross...

    Broader source: Energy.gov (indexed) [DOE]

    2: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks U-252: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks September...

  8. Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency Studies Using Laboratory Generated Particles. Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency...

  9. Evaluation of Passive and Active Soot Filters for Removal of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Passive and Active Soot Filters for Removal of Particulate Emissions from Diesel Engines Evaluation of Passive and Active Soot Filters for Removal of Particulate Emissions from...

  10. Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and...

  11. Electrically heated particulate filter embedded heater design

    SciTech Connect (OSTI)

    Gonze, Eugene V.; Chapman, Mark R.

    2014-07-01T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine and wherein an upstream surface of the particulate filter includes machined grooves. A grid of electrically resistive material is inserted into the machined grooves of the exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF.

  12. Ozone Removal by Filters Containing Activated Carbon: A Pilot Study

    SciTech Connect (OSTI)

    Fisk, William; Spears, Mike; Sullivan, Douglas; Mendell, Mark

    2009-09-01T23:59:59.000Z

    This study evaluated the ozone removal performance of moderate-cost particle filters containing activated carbon when installed in a commercial building heating, ventilating, and air conditioning (HVAC) system. Filters containing 300 g of activated carbon per 0.09 m2 of filter face area were installed in two 'experimental' filter banks within an office building located in Sacramento, CA. The ozone removal performance of the filters was assessed through periodic measurements of ozone concentrations in the air upstream and downstream of the filters. Ozone concentrations were also measured upstream and downstream of a 'reference' filter bank containing filters without any activated carbon. The filter banks with prefilters containing activated carbon were removing 60percent to 70percent of the ozone 67 and 81 days after filter installation. In contrast, there was negligible ozone removal by the reference filter bank without activated carbon.

  13. Method and apparatus for a self-cleaning filter

    DOE Patents [OSTI]

    Diebold, James P. (Lakewood, CO); Lilley, Arthur (Finleyville, PA); Browne, III, Kingsbury (Golden, CO); Walt, Robb Ray (Aurora, CO); Duncan, Dustin (Littleton, CO); Walker, Michael (Longmont, CO); Steele, John (Aurora, CO); Fields, Michael (Arvada, CO)

    2010-11-16T23:59:59.000Z

    A method and apparatus for removing fine particulate matter from a fluid stream without interrupting the overall process or flow. The flowing fluid inflates and expands the flexible filter, and particulate is deposited on the filter media while clean fluid is permitted to pass through the filter. This filter is cleaned when the fluid flow is stopped, the filter collapses, and a force is applied to distort the flexible filter media to dislodge the built-up filter cake. The dislodged filter cake falls to a location that allows undisrupted flow of the fluid after flow is restored. The shed particulate is removed to a bin for periodic collection. A plurality of filter cells can operate independently or in concert, in parallel, or in series to permit cleaning the filters without shutting off the overall fluid flow. The self-cleaning filter is low cost, has low power consumption, and exhibits low differential pressures.

  14. Linear Programming Algorithms for Sparse Filter Design

    E-Print Network [OSTI]

    Baran, Thomas A.

    In designing discrete-time filters, the length of the impulse response is often used as an indication of computational cost. In systems where the complexity is dominated by arithmetic operations, the number of nonzero ...

  15. Integrated electric alternators/active filters

    E-Print Network [OSTI]

    Abolhassani, Mehdi Towliat

    2004-09-30T23:59:59.000Z

    In response to energy crisis and power quality concerns, three different methodologies to integrate the concept of active filtering into the alternators are proposed. Wind energy, due to its free availability and its clean and renewable character...

  16. Efficient implementation schemes for image enhancement filters

    E-Print Network [OSTI]

    Yusuf, Khadem Mahmud

    2012-06-07T23:59:59.000Z

    Generalized median filtering techniques that have appeared in previous literature suffer from some severe disadvantages. They are not only hardware intensive and time consuming but also tend to smear image edges. These shortcomings can be overcome...

  17. Onsite Wastewater Treatment Systems: Sand Filters

    E-Print Network [OSTI]

    Lesikar, Bruce J.

    2008-10-23T23:59:59.000Z

    Sand filters are beds of granular material, or sand, drained from underneath so that pretreated wastewater can be treated, collected and distributed to a land application system. This publication explains the treatment, design, operation...

  18. Optimization of tunable silicon compatible microring filters

    E-Print Network [OSTI]

    Amatya, Reja

    2008-01-01T23:59:59.000Z

    Microring resonators can be used as pass-band filters for wavelength division demultiplexing in electronic-photonic integrated circuits for applications such as analog-to-digital converters (ADCs). For high quality signal ...

  19. Plasma Mass Filters For Nuclear Waste Reprocessing

    SciTech Connect (OSTI)

    Abraham J. Fetterman and Nathaniel J. Fisch

    2011-05-25T23:59:59.000Z

    Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

  20. Plasma Mass Filters For Nuclear Waste Reprocessing

    SciTech Connect (OSTI)

    Abraham J. Fetterman and Nathaniel J. Fisch

    2011-05-26T23:59:59.000Z

    Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

  1. Dissipative Cryogenic Filters with Zero DC Resistance

    SciTech Connect (OSTI)

    Bluhm, Hendrik; Moler, Kathryn A.; /Stanford U., Appl. Phys. Dept

    2008-04-22T23:59:59.000Z

    The authors designed, implemented and tested cryogenic RF filters with zero DC resistance, based on wires with a superconducting core inside a resistive sheath. The superconducting core allows low frequency currents to pass with negligible dissipation. Signals above the cutoff frequency are dissipated in the resistive part due to their small skin depth. The filters consist of twisted wire pairs shielded with copper tape. Above approximately 1 GHz, the attenuation is exponential in {radical}{omega}, as typical for skin depth based RF filters. By using additional capacitors of 10 nF per line, an attenuation of at least 45 dB above 10 MHz can be obtained. Thus, one single filter stage kept at mixing chamber temperature in a dilution refrigerator is sufficient to attenuate room temperature black body radiation to levels corresponding to 10 mK above about 10 MHz.

  2. A Filter Algorithm for Nonlinear Semidefinite Programming

    E-Print Network [OSTI]

    2006-10-26T23:59:59.000Z

    SSDP using a merit function (called Han penalty function) and a line search strategy. ... functions with penalty terms which adjustment can be problematic. ...... Furthermore, (22c) ensures that (?(xk), f(xk)) does not enter to the filter Fk?1.

  3. Two in One: SCR on Filter

    Broader source: Energy.gov (indexed) [DOE]

    1 BASF Corporation; 25 MiddlesexEssex Turnpike; Iselin, NJ 08830 USA 2 BASF Catalysts Germany GmbH; Freundallee 23, 30173 Hannover Two in One: SCR on Filter DEER 2010 2 Potential...

  4. Ungulate Carcasses Perforate Ecological Filters and Create

    E-Print Network [OSTI]

    2007). Forest biodiversity, energy flow, nutrient cycling, and regeneration are significantly affectedUngulate Carcasses Perforate Ecological Filters and Create Biogeochemical Hotspots in Forest. Vucetich, Rolf O. Peterson, Joshua M. Shields, and Matthew D. Powers School of Forest Resources

  5. Development of Self-destructing Filter Cake

    E-Print Network [OSTI]

    Rostami, Ameneh

    2010-08-24T23:59:59.000Z

    chemical reaction rate, especially at high temperatures. This study describes a novel self-destructing drilling fluid system. Filter cakes are formed from a formula of drilling fluid that have a mixture of solid acid precursor and particulate solid acid...

  6. An improved visualization of diesel particulate filter/

    E-Print Network [OSTI]

    Boehm, Kevin (Kevin W.)

    2011-01-01T23:59:59.000Z

    The prevalence of diesel particulate filters (DPF) is increasing as emissions standards worldwide evolve to match current technologies. Since the first application of DPFs in the 1980's, PM trapping effectiveness has ...

  7. Electro-optical tunable birefringent filter

    DOE Patents [OSTI]

    Levinton, Fred M. (Princeton, NJ)

    2012-01-31T23:59:59.000Z

    An electrically tunable Lyot type filter is a Lyot that include one or more filter elements. Each filter element may have a planar, solid crystal comprised of a material that exhibits birefringence and is electro-optically active. Transparent electrodes may be coated on each face of the crystal. An input linear light polarizer may be located on one side of the crystal and oriented at 45 degrees to the optical axis of the birefringent crystal. An output linear light polarizer may be located on the other side of the crystal and oriented at -45 degrees with respect to the optical axis of the birefringent crystal. When an electric voltage is applied between the electrodes, the retardation of the crystal changes and so does the spectral transmission of the optical filter.

  8. Advanced filters and components for power applications

    E-Print Network [OSTI]

    Neugebauer, Timothy Carl, 1975-

    2004-01-01T23:59:59.000Z

    The objective of this thesis is to improve the high frequency performance of components and filters by better compensating the parasitic effects of practical components. The main application for this improvement is in ...

  9. Piezoelectric MEMS resonator characterization and filter design

    E-Print Network [OSTI]

    Kang, Joung-Mo, 1978-

    2004-01-01T23:59:59.000Z

    This thesis presents modeling and first measurements of a new piezoelectric MEMS resonator developed at Draper Laboratory. In addition, some simple filter designs incorporating the resonator with predicted performance ...

  10. Bark and Charcoal Filters for Greywater Treatment

    E-Print Network [OSTI]

    Abstract Water scarcity, inappropriate sanitation and wastewater pollution are critically important global of microorganisms was poor. The sand filters demonstrated low BOD5 removal (67-91%) and high nitrification, but low

  11. Submitted to Statistical Science Mapping Energy Landscapes of

    E-Print Network [OSTI]

    Zhu, Song Chun

    (ELMs) which characterize and visualize an energy function with a tree structure, in which each leafSubmitted to Statistical Science Mapping Energy Landscapes of Non-Convex Learning Problems Maria-convex in various model spaces and thus are difficult to analyze. In this paper, we compute Energy Landscape Maps

  12. SUBMITTED TO JSAC, FEB. 2005 1 Distributed Interference Compensation for

    E-Print Network [OSTI]

    Kuzmanovic, Aleksandar

    SUBMITTED TO JSAC, FEB. 2005 1 Distributed Interference Compensation for Wireless Networks Jianwei Huang, Randall Berry, Michael L. Honig Abstract We consider a distributed power control scheme for wireless ad hoc networks, in which each user announces a price that reflects compensation paid by other

  13. Green Fund Report, Submitted to the Green University Planning Committee,

    E-Print Network [OSTI]

    Owens, Philip

    and final report submitted, January 2012 5 2011 January Compost Visioning Workshop (PGPIRG) Original budget potential study (Steve Helle, Geoff de Ruiter) Original budget: $5000 Final cost: $5000 · completed- progress 11 2012 May University Farmers' Market communication (UFM) Original budget: $5522 Final cost

  14. SUBMITTED TO GRL 1 Thermal Anisotropies in the Solar Wind

    E-Print Network [OSTI]

    Richardson, John

    SUBMITTED TO GRL 1 E Thermal Anisotropies in the Solar Wind: vidence of Heating by Interstellar cyclotron instabilit s generated by newly created pickup ions and heats the thermal solar wind protons TO GRL 2 T Introduction he thermal anisotropy of the solar wind is the ratio between the temperatures p

  15. Request for Addition or Change to SPP Submitted By

    E-Print Network [OSTI]

    Kamat, Vineet R.

    Request for Addition or Change to SPP UM AEC Submitted By: Phone: E-mail: General Product Information Manufacturer/Product Name List of Installations within 50 Miles of Ann Arbor Years Product in Use Certification Certified wood Green Seal Standard GS-11 and Green Seal Plus (iaq) Greenguard Primarily indoor air

  16. Acta Math. Univ. Comenianae Vol. (submitted to AMUC), pp. 110

    E-Print Network [OSTI]

    Monneau, Régis

    +). In particular it is being used to model the industrial process of Self-propagating High temperature SynthesisActa Math. Univ. Comenianae Vol. (submitted to AMUC), pp. 1­10 1 SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS (SHS) IN THE HIGH ACTIVATION ENERGY REGIME R. MONNEAU and G.S. WEISS Abstract. We derive

  17. Hardware-Assisted Secure Computation Submitted to the Faculty

    E-Print Network [OSTI]

    Hardware-Assisted Secure Computation A Thesis Submitted to the Faculty in partial fulfillment community has worked on Secure Multiparty Computation (SMC) for more than two decades, and has produced many and some due to the blinding. However, secure coprocessors like the IBM 4758 have actual security

  18. Submitted to Operations Research manuscript OPRE-2009-09-406

    E-Print Network [OSTI]

    Powell, Warren B.

    the problem of making advance energy commitments for wind farms in the pres- ence of a storage device with conversion losses, mean-reverting price process, and an auto-regressive energy generation process from wind Programming, Energy History : This paper was first submitted on September 4, 2009 and has been revised and re

  19. Aluminum Removal from Photographic Waste Submitted to Dr. Tony Bi

    E-Print Network [OSTI]

    Aluminum Removal from Photographic Waste Submitted to Dr. Tony Bi By: Kristen Favel, Tiffany Jung, and Kenny Tam CHBE 484 University of British Columbia April 15, 2009 #12;ii "Aluminum Removal from photographic waste has shown elevated levels of aluminum in the fixer, which exceed sewer discharge standards

  20. Manuscript submitted to Website: http://AIMsciences.org AIMS' Journals

    E-Print Network [OSTI]

    Takahashi, Takéo - Institut de Mathématiques ?lie Cartan, Université Henri Poincaré

    the works of d'Alembert that the problem of solid-fluid interaction may contain modeling issues. Indeed, he pp. X­XX SMALL SOLIDS IN AN INVISCID FLUID Boris Andreianov Laboratoire de Math´ematiques de Besan showed that a solid immersed in an inviscid fluid may not be submitted to any resultant force; in other

  1. Submitted to Management Science manuscript (Please, provide the mansucript number!)

    E-Print Network [OSTI]

    Ziya, Serhan

    management 1. Introduction In many service systems, service is simultaneously delivered to many customers who quality. One is simply through the crowding effect. In most systems, customers do not like over- crowdedSubmitted to Management Science manuscript (Please, provide the mansucript number!) Managing

  2. Optimal multihump filter for photometric redshifts

    E-Print Network [OSTI]

    Tamas Budavari; Alexander S. Szalay; Istvan Csabai; Andrew J. Connolly; Zlatan Tsvetanov

    2001-06-05T23:59:59.000Z

    We propose a novel type filter for multicolor imaging to improve on the photometric redshift estimation of galaxies. An extra filter - specific to a certain photometric system - may be utilized with high efficiency. We present a case study of the Hubble Space Telescope's Advanced Camera for Surveys and show that one extra exposure could cut down the mean square error on photometric redshifts by 34% over the z<1.3 redshift range.

  3. Electrical diesel particulate filter (DPF) regeneration

    DOE Patents [OSTI]

    Gonze, Eugene V; Ament, Frank

    2013-12-31T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine includes a diesel particulate filter (DPF) that is disposed downstream of the engine and that filters particulates from the exhaust. An electrical heater is disposed upstream of the DPF and selectively heats the exhaust to initiate combustion of the particulates within the exhaust as it passes therethrough. Heat generated by combustion of the particulates induces combustion of particulates within the DPF.

  4. E-Print Network 3.0 - active power filtering Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    filtering Search Powered by Explorit Topic List Advanced Search Sample search results for: active power filtering...

  5. E-Print Network 3.0 - active power filter Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    filter Search Powered by Explorit Topic List Advanced Search Sample search results for: active power filter...

  6. E-Print Network 3.0 - active power filters Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    filters Search Powered by Explorit Topic List Advanced Search Sample search results for: active power filters...

  7. Electrically heated particulate matter filter with recessed inlet end plugs

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Ament, Frank (Troy, MI)

    2012-02-21T23:59:59.000Z

    A particulate matter (PM) filter includes filter walls having inlet ends and outlet ends. First adjacent pairs of the filter walls define inlet channels. Second adjacent pairs of the filter walls define outlet channels. Outlet end plugs are arranged in the inlet channels adjacent to the output ends. Inlet end plugs arranged in the outlet channels spaced from the inlet ends.

  8. Removal of residual particulate matter from filter media

    DOE Patents [OSTI]

    Almlie, Jay C; Miller, Stanley J

    2014-11-11T23:59:59.000Z

    A method for removing residual filter cakes that remain adhered to a filter after typical particulate removal methodologies have been employed, such as pulse-jet filter element cleaning, for all cleanable filters used for air pollution control, dust control, or powder control.

  9. Proceedings: Indoor Air 2005 OZONE REMOVAL BY RESIDENTIAL HVAC FILTERS

    E-Print Network [OSTI]

    Siegel, Jeffrey

    Proceedings: Indoor Air 2005 2366 OZONE REMOVAL BY RESIDENTIAL HVAC FILTERS P Zhao1,2 , JA Siegel1, Austin, Texas 78758, USA ABSTRACT HVAC filters have a significant influence on indoor air quality% for Filter #2 at a face velocity of 0.81 cm/s. The potential for HVAC filters to affect ozone concentrations

  10. Parameter Estimation Using Dual Fractional Power Filters Jason M. Kinser

    E-Print Network [OSTI]

    Kinser, Jason M.

    discriminant functions (SDF) which are reviewed in ref. 9. Unlike the previous methods, the SDF class of the SDF class. These filters are Fractional Power Filters (FPFs) which will be reviewed in Section 2 is a superset of two standard SDF-class filters: the SDF and the MACE filter. This section will review the SDF

  11. Method of and apparatus for testing the integrity of filters

    DOE Patents [OSTI]

    Herman, R.L.

    1985-05-07T23:59:59.000Z

    A method of and apparatus are disclosed for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage. 5 figs.

  12. Moving Granular Bed Filter Development Program

    SciTech Connect (OSTI)

    Wilson, K.B.; Haas, J.C. [Combustion Power Co., San Mateo, CA (United States); Gupta, R.P.; Turk, B.S. [Research Triangle Inst., Research Triangle Park, NC (United States)

    1996-12-31T23:59:59.000Z

    For coal-fired power plants utilizing a gas turbine, the removal of ash particles is necessary to protect the turbine and to meet emission standards. Advantages are also evident for a filter system that can remove other coal-derived contaminants such as alkali, halogens, and ammonia. With most particulates and other contaminants removed, erosion and corrosion of turbine materials, as well as deposition of particles within the turbine, are reduced to acceptable levels. The granular bed filter is suitable for this task in a pressurized gasification or combustion environment. The objective of the base contract was to develop conceptual designs of moving granular bed filter (GBF) and ceramic candle filter technologies for control of particles from integrated gasification combined cycle (IGCC), pressurized fluidized-bed combustion (PFBC), and direct coal-fueled turbine (DCFT) systems. The results of this study showed that the GBF design compared favorably with the candle filter. Three program options followed the base contract. The objective of Option I, Component Testing, was to identify and resolve technical issues regarding GBF development for IGCC and PFBC environments. This program was recently completed. The objective of Option II, Filter Proof Tests, is to test and evaluate the moving GBF system at a government-furnished hot-gas cleanup test facility. This facility is located at Southern Company Services (SCS), Inc., Wilsonville, Alabama. The objective of Option III, Multicontaminant Control Using a GBF, is to develop a chemically reactive filter material that will remove particulates plus one or more of the following coal-derived contaminants: alkali, halogens, and ammonia.

  13. Carbon fiber composite molecular sieve electrically regenerable air filter media

    DOE Patents [OSTI]

    Wilson, K.A.; Burchell, T.D.; Judkins, R.R.

    1998-10-27T23:59:59.000Z

    An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply air stream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium. 3 figs.

  14. Removable, hermetically-sealing, filter attachment system for hostile environments

    DOE Patents [OSTI]

    Mayfield, Glenn L [Richland, WA

    1983-01-01T23:59:59.000Z

    A removable and reusable filter attachment system. A filter medium is fixed o, and surrounded by, a filter frame having a coaxial, longitudinally extending, annular rim. The rim engages an annular groove which surrounds the opening of a filter housing. The annular groove contains a fusible material and a heating mechanism for melting the fusible material. Upon resolidifying, the fusible material forms a hermetic bond with the rim and groove. Remelting allows detachment and replacement of the filter frame.

  15. Carbon fiber composite molecular sieve electrically regenerable air filter media

    DOE Patents [OSTI]

    Wilson, Kirk A. (Knoxville, TN); Burchell, Timothy D. (Oak Ridge, TN); Judkins, Roddie R. (Knoxville, TN)

    1998-01-01T23:59:59.000Z

    An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply airstream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium.

  16. SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project

    E-Print Network [OSTI]

    Huang, Haiying

    SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project I. PERSONAL#: ______________________________________ Anticipated Graduation Date: ______________________ Date Submitted: _________________________________ Mav: _______________________________________ Classification: Junior Senior II. PROJECT INFORMATION Type of Project: Thesis Group Project Internship Creative

  17. Comment submitted by Hobart/ITW Food Equipment Group regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Hobart/ITW Food Equipment Group regarding the Energy Star Verification Testing Program

  18. Comment submitted by BSH Home Appliances Corporation regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by BSH Home Appliances Corporation regarding the Energy Star Verification Testing Program

  19. Comment submitted by CertainTeed Corporation regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by CertainTeed Corporation regarding the Energy Star Verification Testing Program

  20. Comment submitted by the Natural Resources Defense Council (NRDC) regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by the Natural Resources Defense Council (NRDC) regarding the Energy Star Verification Testing Program

  1. Comment submitted by Hoshizaki America, Inc. regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Hoshizaki America, Inc. regarding the Energy Star Verification Testing Program

  2. Comment submitted by Energizer Battery Manufacturing, Inc. regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Energizer Battery Manufacturing, Inc. regarding the Energy Star Verification Testing Program

  3. Comment submitted by United Lighting, Inc. regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by United Lighting, Inc. regarding the Energy Star Verification Testing Program

  4. Comment submitted by A. O. Smith Corporation regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by A. O. Smith Corporation regarding the Energy Star Verification Testing Program

  5. Comment submitted by the Alliance for Water Efficiency (AWE) regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by the Alliance for Water Efficiency (AWE) regarding the Energy Star Verification Testing Program

  6. Page 1 of 4 Creating and Submitting a Key Request

    E-Print Network [OSTI]

    Howitt, Ivan

    of employees. Enter search criteria in the search fields available and select the down red arrow to filter the terms. #12;Page 3 of 4 13. On the Key Request Form - Room List windowpane, select Add New. 14 use the Select Drawing button after entering the building and floor to display the floor plan

  7. Hot gas filter and system assembly

    DOE Patents [OSTI]

    Lippert, Thomas Edwin (Murrysville, PA); Palmer, Kathryn Miles (Monroeville, PA); Bruck, Gerald Joseph (Murrysville, PA); Alvin, Mary Anne (Pittsburgh, PA); Smeltzer, Eugene E. (Export, PA); Bachovchin, Dennis Michael (Murrysville, PA)

    1999-01-01T23:59:59.000Z

    A filter element for separating fine dirty particles from a hot gas. The filter element comprises a first porous wall and a second porous wall. Each porous wall has an outer surface and an inner surface. The first and second porous walls being coupled together thereby forming a substantially closed figure and open at one end. The open end is formed to be coupled to a hot gas clean up system support structure. The first and second porous walls define a channel beginning at the open end and terminate at the closed end through which a filtered clean gas can flow through and out into the clean gas side of a hot gas clean up system.

  8. Hot gas filter and system assembly

    DOE Patents [OSTI]

    Lippert, T.E.; Palmer, K.M.; Bruck, G.J.; Alvin, M.A.; Smeltzer, E.E.; Bachovchin, D.M.

    1999-08-31T23:59:59.000Z

    A filter element is described for separating fine dirty particles from a hot gas. The filter element comprises a first porous wall and a second porous wall. Each porous wall has an outer surface and an inner surface. The first and second porous walls being coupled together thereby forming a substantially closed figure and open at one end. The open end is formed to be coupled to a hot gas clean up system support structure. The first and second porous walls define a channel beginning at the open end and terminate at the closed end through which a filtered clean gas can flow through and out into the clean gas side of a hot gas clean up system. 8 figs.

  9. Ceramic oxide composite hot gas filters

    SciTech Connect (OSTI)

    Wagner, R.A.; Weitzel, P. [Babcock and Wilcox, Lynchburg, VA (United States)

    1996-12-31T23:59:59.000Z

    This paper describes the development and testing of continuous fiber ceramic composites (CFCC) based hot gas filters. The work was divided into three primary tasks. In the first task, a preliminary set of compositions was fabricated in the form of open end tubes and characterized. The results of the first task were then used to identify the most promising compositions for sub-scale fabrication and testing. In addition to laboratory measurements of permeability and strength, exposure testing in a coal combustion environment was performed to assess the thermo-chemical stability of the CFCC materials. The results of this testing were used to down-select the filter composition for full-scale filter fabrication and testing in the third phase of the program.

  10. Secondary Pollutants from Ozone Reaction with Ventilation Filters and Degradation of Filter Media Additives

    SciTech Connect (OSTI)

    Destaillats, Hugo; Chen, Wenhao; Apte, Michael; Li, Nuan; Spears, Michael; Almosni, Jrmie; Brunner, Gregory; Zhang, Jianshun (Jensen); Fisk, William J.

    2011-05-01T23:59:59.000Z

    Prior research suggests that chemical processes taking place on the surface of particle filters employed in buildings may lead to the formation of harmful secondary byproducts. We investigated ozone reactions with fiberglass, polyester, cotton/polyester and polyolefin filter media, as well as hydrolysis of filter media additives. Studies were carried out on unused media, and on filters that were installed for 3 months in buildings at two different locations in the San Francisco Bay Area. Specimens from each filter media were exposed to {approx}150 ppbv ozone in a flow tube under a constant flow of dry or humidified air (50percent RH). Ozone breakthrough was recorded for each sample over periods of {approx}1000 min; the ozone uptake rate was calculated for an initial transient period and for steady-state conditions. While ozone uptake was observed in all cases, we did not observe significant differences in the uptake rate and capacity for the various types of filter media tested. Most experiments were performed at an airflow rate of 1.3 L/min (face velocity = 0.013 m/s), and a few tests were also run at higher rates (8 to 10 L/min). Formaldehyde and acetaldehyde, two oxidation byproducts, were quantified downstream of each sample. Those aldehydes (m/z 31 and 45) and other volatile byproducts (m/z 57, 59, 61 and 101) were also detected in real-time using Proton-Transfer Reaction - Mass Spectrometry (PTR-MS). Low-ppbv byproduct emissions were consistently higher under humidified air than under dry conditions, and were higher when the filters were loaded with particles, as compared with unused filters. No significant differences were observed when ozone reacted over various types of filter media. Fiberglass filters heavily coated with impaction oil (tackifier) showed higher formaldehyde emissions than other samples. Those emissions were particularly high in the case of used filters, and were observed even in the absence of ozone, suggesting that hydrolysis of additives, rather than ozonolysis, is the main formaldehyde source in those filters. Emission rates of formaldehyde and acetaldehyde were not found to be large enough to substantially increase indoor concentrations in typical building scenarios. Nevertheless, ozone reactions on HVAC filters cannot be ignored as a source of low levels of indoor irritants.

  11. METAL MEDIA FILTERS, AG-1 SECTION FI

    SciTech Connect (OSTI)

    Adamson, D.

    2012-05-23T23:59:59.000Z

    One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures, media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, data was lacking to complete an AG-1 FI Standard on metal media. With funding secured by Mississippi State University (MSU) from National Nuclear Security Administration (NNSA), a research test stand is being designed and fabricated at MSU's Institute for Clean Energy Technology (ICET) Facility to obtain qualification data on metal media. This in turn will support required data needed for the FI Standard. The paper will discuss in detail how the test stand at MSU will obtain the necessary data to complete the FI Standard.

  12. Electrically heated particulate filter with reduced stress

    DOE Patents [OSTI]

    Gonze, Eugene V.

    2013-03-05T23:59:59.000Z

    A system comprises a particulate matter (PM) filter comprising an inlet for receiving exhaust gas. A zoned heater is arranged in the inlet and comprises a resistive heater comprising N zones, where N is an integer greater than one. Each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates others of the N zones.

  13. Efficient Quantum Filtering for Quantum Feedback Control

    E-Print Network [OSTI]

    Pierre Rouchon; Jason F. Ralph

    2015-01-06T23:59:59.000Z

    We discuss an efficient numerical scheme for the recursive filtering of diffusive quantum stochastic master equations. We show that the resultant quantum trajectory is robust and may be used for feedback based on inefficient measurements. The proposed numerical scheme is amenable to approximation, which can be used to further reduce the computational burden associated with calculating quantum trajectories and may allow real-time quantum filtering. We provide a two-qubit example where feedback control of entanglement may be within the scope of current experimental systems.

  14. Electrically heated particulate filter using catalyst striping

    SciTech Connect (OSTI)

    Gonze, Eugene V; Paratore, Jr., Michael J; Ament, Frank

    2013-07-16T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine. A grid of electrically resistive material is applied to an exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF. A catalyst coating is applied to the PF that increases a temperature of the combustion of the particulates within the PF.

  15. Electrically heated particulate filter enhanced ignition strategy

    SciTech Connect (OSTI)

    Gonze, Eugene V; Paratore, Jr., Michael J

    2012-10-23T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine. A grid of electrically resistive material is applied to an exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF. A catalyst coating applied to at least one of the PF and the grid. A control module estimates a temperature of the grid and controls the engine to produce a desired exhaust product to increase the temperature of the grid.

  16. Variable flexure-based fluid filter

    DOE Patents [OSTI]

    Brown, Steve B.; Colston Jr., Billy W.; Marshall, Graham; Wolcott, Duane

    2007-03-13T23:59:59.000Z

    An apparatus and method for filtering particles from a fluid comprises a fluid inlet, a fluid outlet, a variable size passage between the fluid inlet and the fluid outlet, and means for adjusting the size of the variable size passage for filtering the particles from the fluid. An inlet fluid flow stream is introduced to a fixture with a variable size passage. The size of the variable size passage is set so that the fluid passes through the variable size passage but the particles do not pass through the variable size passage.

  17. ADVANCED SECOND GENERATION CERAMIC CANDLE FILTERS

    SciTech Connect (OSTI)

    M.A. Alvin

    2002-01-31T23:59:59.000Z

    Through sponsorship from the Department of Energy's National Energy Technology Laboratory (DOE/NETL), development and manufacture of advanced second generation candle filters was undertaken in the early 1990's. Efforts were primarily focused on the manufacture of fracture toughened, 1.5 m, continuous fiber ceramic composite (CFCC) and filament wound candle filters by 3M, McDermott, DuPont Lanxide Composites, and Techniweave. In order to demonstrate long-term thermal, chemical, and mechanical stability of the advanced second generation candle filter materials, Siemens Westinghouse initiated high temperature, bench-scale, corrosion testing of 3M's CVI-SiC and DuPont's PRD-66 mini-candles, and DuPont's CFCC SiC-SiC and IF&P Fibrosic{sup TM} coupons under simulated, pressurized fluidized-bed combustion (PFBC) conditions. This effort was followed by an evaluation of the mechanical and filtration performance of the advanced second generation filter elements in Siemens Westinghouse's bench-scale PFBC test facility in Pittsburgh, Pennsylvania. Arrays of 1.4-1.5 m 3M CVI-SiC, DuPont PRD-66, DuPont SiC-SiC, and IF&P Fibrosic{sup TM} candles were subjected to steady state process operating conditions, increased severity thermal transients, and accelerated pulse cycling test campaigns which represented {approx}1760 hours of equivalent filter operating life. Siemens Westinghouse subsequently participated in early material surveillance programs which marked entry of the 3M CVI-SiC and DuPont PRD-66 candle filters in Siemens Westinghouse Advanced Particulate Filtration (APF) system at the American Electric Power (AEP) Tidd Demonstration Plant in Brilliant, Ohio. Siemens Westinghouse then conducted an extended, accelerated life, qualification program, evaluating the performance of the 3M, McDermott, and Techniweave oxide-based CFCC filter elements, modified DuPont PRD-66 elements, and the Blasch, Scapa Cerafil{sup TM}, and Specific Surface monolithic candles for use in the APF system at the Foster Wheeler pressurized circulating fluidized-bed combustion (PCFBC), pilot-scale, test facility in Karhula, Finland. This report presents a summary of these efforts, defining the stability of the various porous ceramic filter materials, as well as component performance and extended life for use in advanced coal-based power systems.

  18. Modeling Multi Output Filtering Effects in PCMOS

    E-Print Network [OSTI]

    Mooney, Vincent

    Modeling Multi Output Filtering Effects in PCMOS Anshul Singh*, Arindam Basu, Keck-Voon Ling, Nanyang Technological University (NTU), Singapore *NTU-Rice Institute of Sustainable and Applied Infodynamics (ISAID), NTU, Singapore $School of Computer Engineering, NTU, Singapore §School of ECE, Georgia

  19. Evaluation and Conversation in Collaborative Filtering

    E-Print Network [OSTI]

    Hammerton, James

    laid down by the university. Rachael Rafter October 2010 ii #12;For My Parents, Helen and Maurice iii collaborative filtering, I find myself suddenly lost for words when I try to express what these people mean, albeit the academic one. And to my parents, Maurice and Helen.....what can I say....there are no words

  20. Kalman Filtering in Correlated Losses Sachin Adlakha

    E-Print Network [OSTI]

    Adlakha, Sachin

    for such networks is the tracking and navigation of autonomous vehicles using sensor nodes. Such applications in presence of correlated losses using a Kalman Filter . This scenario arises in performing vehicle tracking Electro Mechanical Systems (MEMS) have fueled interest in research and development of a new class

  1. A SPEECHENHANCEMENT METHOD BASEDON KALMAN FILTERING

    E-Print Network [OSTI]

    and intelligibility of speech. In automatic speech and speaker recognition systems if a speech enhancement scheme.Speechenhancementalsoplays animportantroleinspeechcoding applications. The problem addressed in the present paper i s to enhance speech when only proposed a nonstationary Wiener filterirlg method for speech enhancement, where the Wiener filter

  2. Efficiently Filtering RFID Data Streams Yijian Bai

    E-Print Network [OSTI]

    Lee, Dongwon

    @cs.ucla.edu Siemens Corporate Research {fusheng.wang,peiya.liu}@siemens.com Abstract RFID holds the promise of real, filtered, and transformed into semantic application data. RFID data, however, contains false readings tracking, smart *Work done while visiting Siemens Corporate Research. Permission to make digital or hard

  3. Adaptive Filtering of Multilingual Document Streams

    E-Print Network [OSTI]

    Oard, Doug

    the volume of new documents that must be examined by the user to manageable levels. This paper presents three techniques for extending adaptive monolingual text ltering techniques to manage multilingual document streamsAdaptive Filtering of Multilingual Document Streams Douglas W. Oard College of Library

  4. Micromechanical optical filters for spectrometry Hakon Sagberg

    E-Print Network [OSTI]

    Johansen, Tom Henning

    This thesis presents a study of optical filters that are fabricated as micro-electro- mechanical systems (MEMS. Experiments show that sensitive microphones can be made with this technology. The thesis consists partner. He has posed critical questions and saved me from spending too much time in blind alleys

  5. Nitride-bonded silicon carbide composite filter

    SciTech Connect (OSTI)

    Thomson, B.N.; DiPietro, S.G.

    1995-12-01T23:59:59.000Z

    The objective of this program is to develop and demonstrate an advanced hot gas filter, using ceramic component technology, with enhanced durability to provide increased resistance to thermal fatigue and crack propagation. The material is silicon carbide fiber reinforced nitride bonded silicon carbide.

  6. Abductive reasoning through Filtering Chitta Baral

    E-Print Network [OSTI]

    Baral, Chitta

    Abductive reasoning through Filtering Chitta Baral Department of Computer Science and Engg. Arizona State University Tempe, AZ, 85287, USA chitta@asu.edu Abstract Abduction is an inference mechanism where to as abductive reasoning. Given a theory and some observations, by fil­ tering the theory with the observations

  7. Drain Flies (Moth Flies or Filter Flies)

    E-Print Network [OSTI]

    Sansone, Chris; Minzenmayer, Rick

    2003-07-21T23:59:59.000Z

    Drain Flies (Moth Flies or Filter Flies) E-184 7-03 Chris Sansone, Rick Minzenmayer and Bastiaan M. Drees* S mall flies in the home can be a common problem. Scientifically, the word ?fly? refers to insects in the order Diptera, which typi- cally...

  8. NISTIR 7516 Forensic Filtering of Cell

    E-Print Network [OSTI]

    NISTIR 7516 Forensic Filtering of Cell Phone Protocols AurélienDelaitre WayneJansen #12;ii Forensic of Standards and Technology Interagency Report 42 pages (2008) iii #12;Abstract Phone managers are non-forensic managers are sometimes used by forensic investigators to recover data from a cell phone when no suitable

  9. E-Print Network 3.0 - adaptive information filtering Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    information filtering Page: << < 1 2 3 4 5 > >> 1 Applications of the Fourier Transform in Imaging Highpass and Lowpass Filters Summary: filters. The following was prelimi-...

  10. Investigation of IAQ-Relevant Surface Chemistry and Emissions on HVAC Filter Materials

    E-Print Network [OSTI]

    Destaillats, Hugo

    2010-01-01T23:59:59.000Z

    VOCs emitted by reactions of HVAC filters with ozone usingChemistry and Emissions on HVAC Filter Materials HugoChemistry and Emissions on HVAC Filter Materials Authors:

  11. Laboratory measurement of secondary pollutant yields from ozone reaction with HVAC filters.

    E-Print Network [OSTI]

    Destaillats, Hugo

    2012-01-01T23:59:59.000Z

    from Ozone Reaction with HVAC Filters Hugo Destaillats,from Ozone Reaction with HVAC Filters Hugo Destaillatsfrom Ozone Reaction with HVAC Filters Hugo Destaillats

  12. Novel rf mems tunable filters with adjustable spurious suppression

    E-Print Network [OSTI]

    Sekar, Vikram

    2009-05-15T23:59:59.000Z

    This thesis presents the theory and design of fixed and Radio Frequency (RF) Microelectromechanical Systems (MEMS) -based tunable microwave filters for RF and microwave applications. The methodology for the design of coupled resonator filters...

  13. OXYGEN TRANSFER IN TRICKLING FILTERS By BruceE. Logan~

    E-Print Network [OSTI]

    OXYGEN TRANSFER IN TRICKLING FILTERS By BruceE. Logan~ ABSTRACT: Insufficientoxygen transfer can result in anaerobic biofilmsand odor generation during biochemicaloxygen demand (BOD) removal plastic media trickling filters occurs by diffusion of oxygen through thin fluid films, previous models

  14. adaptive notch filters: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 12;1 Introduction Filter bank theory 1 is by now a mature topic Reilly, James P. 133 ANALYSIS OF THE ADAPTIVE MATCHED FILTER ALGORITHM FOR CASES WITH...

  15. adaptive filtering system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 12;1 Introduction Filter bank theory 1 is by now a mature topic Reilly, James P. 51 Study on Adaptive Kalman Filtering Algorithms in Human Movement Tracking...

  16. adaptive notch filter: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 12;1 Introduction Filter bank theory 1 is by now a mature topic Reilly, James P. 133 ANALYSIS OF THE ADAPTIVE MATCHED FILTER ALGORITHM FOR CASES WITH...

  17. adaptive smoothing filter: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 12;1 Introduction Filter bank theory 1 is by now a mature topic Reilly, James P. 162 ANALYSIS OF THE ADAPTIVE MATCHED FILTER ALGORITHM FOR CASES WITH...

  18. Durability of Diesel Engine Particulate Filters CRADA No. ORNL...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Durability of Diesel Engine Particulate Filters CRADA No. ORNL-04-0692 with Cummins Inc. Durability of Diesel Engine Particulate Filters CRADA No. ORNL-04-0692 with Cummins Inc....

  19. The discrete Kalman filtering approach for seismic signals deconvolution

    SciTech Connect (OSTI)

    Kurniadi, Rizal; Nurhandoko, Bagus Endar B. [Departement of Physics Intitut Teknologi Bandung, Jl. Ganesha 10 Bandung (Indonesia)

    2012-06-20T23:59:59.000Z

    Seismic signals are a convolution of reflectivity and seismic wavelet. One of the most important stages in seismic data processing is deconvolution process; the process of deconvolution is inverse filters based on Wiener filter theory. This theory is limited by certain modelling assumptions, which may not always valid. The discrete form of the Kalman filter is then used to generate an estimate of the reflectivity function. The main advantage of Kalman filtering is capability of technique to handling continually time varying models and has high resolution capabilities. In this work, we use discrete Kalman filter that it was combined with primitive deconvolution. Filtering process works on reflectivity function, hence the work flow of filtering is started with primitive deconvolution using inverse of wavelet. The seismic signals then are obtained by convoluting of filtered reflectivity function with energy waveform which is referred to as the seismic wavelet. The higher frequency of wavelet gives smaller wave length, the graphs of these results are presented.

  20. How to Submit an ERCAP Request (2013 version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC HistoryVeteransto get a NERSC accountSubmit

  1. Fermilab Office of General Counsel - Ethics Program - Submit a Question

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibility ofSmall Works: 2008Submit a Question Ask the Ethicist

  2. Preparation of Metal Filter Element for Fail Safety in IGCC Filter Unit

    SciTech Connect (OSTI)

    Choi, J-H.; Ahn, I-S.; Bak, Y-C.; Bae, S-Y.; Ha, S-J.; Jang, H-J.

    2002-09-18T23:59:59.000Z

    Metal filter elements as the fail safety filter are fabricated by the methods using cold isostatic pressure (compress method) and binder (binder method) to form the filter element and tested in a experimental and bench units. The fail safety filter on the filtration system is mounted additionally in order to intercept the particle leak when the main filter element is broken. So it should have two contrary functions of a high permeability and being plugged easily. The filter element having high porosity and high plugging property was fabricated by the bind method. It has the porosity more than 50%, showed very small pressure drop less than 10mmH2O at the face velocity of 0.15m/s, and plugged within 5 minutes with the inhibition of the particle leak larger than 4 {micro}m. The test result of corrosion tendency in IGCC gas stream at 500 C shows SUS310L material is very reasonable among SUS310, SUS316, Inconel 600, and Hastelloy X.

  3. Photometry Transformation from $RGB$ Bayer Filter System to Johnson-Cousins $BVR$ Filter System

    E-Print Network [OSTI]

    Park, Woojin; Shim, Hyunjin; Le, Huynh Anh N; Im, Myungshin; Chang, Seunghyuk; Yu, Joonkyu

    2015-01-01T23:59:59.000Z

    The $RGB$ Bayer filter system consists of mosaic $R$, $G$, and $B$ filters on the grid of photo sensors which typical commercial DSLR (Digital Single Lens Reflex) cameras and CCD cameras are equipped with. Many unique astronomical data obtained using a $RGB$ Bayer filter system are available, including transient objects, e.g., supernovae, variable stars, and solar system bodies. The utilization of such data in scientific research strongly requires reliable photometry transformation methods. In this work, we develop a series of equations to convert the observed magnitudes in the $RGB$ Bayer filter system ($R_B$, $G_B$, and $B_B$) into the Johnson-Cousins $BVR$ filter system ($B_J$, $V_J$, and $R_C$). The new transformation equations derive the calculated magnitudes in Johnson-Cousins filters ($B_{Jcal}$, $V_{Jcal}$, and $R_{Ccal}$) as functions of magnitudes and colors. The mean differences between the transformed magnitudes and original magnitudes, i.e., the residuals, are $\\Delta(B_J-B_{Jcal})$ = 0.104 mag, ...

  4. Results from tests of DuPont crossflow filter

    SciTech Connect (OSTI)

    Steimke, J.L.

    2000-05-05T23:59:59.000Z

    Crossflow filtration will be used to filter radioactive waste slurry as part of the Late Wash Process.

  5. Fundamental study on recovery uranium oxide from HEPA filters

    SciTech Connect (OSTI)

    Izumida, T. [Hitachi Ltd., Ibaraki (Japan). Hitachi Works; Matsumoto, H.; Tsuchiya, H.; Iba, H. [Hitachi Nuclear Engineering Co., Ltd., Ibaraki (Japan); Noguchi, Y. [Radioactive Waste Management Center, Tokyo (Japan)

    1993-12-31T23:59:59.000Z

    Large numbers of spent HEPA filters are produced at uranium fuel fabrication facilities. Uranium oxide particles have been collected on these filters. Then, a spent HEPA filter treatment system was developed from the viewpoint of recovering the UO{sub 2} and minimizing the volume. The system consists of a mechanical separation process and a chemical dissolution process. This paper describes the results of fundamental experiments on recovering UO{sub 2} from HEPA filters.

  6. Electrically heated particulate filter propagation support methods and systems

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-06-07T23:59:59.000Z

    A control system that controls regeneration of a particulate filter is provided. The system generally includes a regeneration module that controls current to the particulate filter to initiate combustion of particulate matter in the particulate filter. A propagation module estimates a propagation status of the combustion of the particulate matter based on a combustion temperature. A temperature adjustment module controls the combustion temperature by selectively increasing a temperature of exhaust that passes through the particulate filter.

  7. On-Site Wastewater Treatment Systems: Trickling Filter

    E-Print Network [OSTI]

    Lesikar, Bruce J.

    2000-02-04T23:59:59.000Z

    Soil absorption field Septic tank Clarifier/Dosing tank Trickling filter On-site wastewater treatment systems Trickling filter Bruce Lesikar and Russell Persyn Extension Agricultural Engineering Specialist, Extension Assistant-Water Conservation... municipal wastewater before cities began using activated sludge aeration systems. Now, homes and businesses use trickling filters in on-site wastewater treatment systems. Each trickling filter system has several components: 3 A septic tank, which removes...

  8. Electrically heated particulate filter preparation methods and systems

    SciTech Connect (OSTI)

    Gonze, Eugene V [Pinckney, MI

    2012-01-31T23:59:59.000Z

    A control system that controls regeneration of a particulate filter is provided. The system generally includes a fuel control module that controls injection of fuel into exhaust that passes through the particulate filter. A regeneration module controls current to the particulate filter to initiate regeneration after the fuel has been injected into the exhaust.

  9. SOMS HYBRID SPIN-ON FILTER Sponsor: SOMS Technologies

    E-Print Network [OSTI]

    Salama, Khaled

    the lubricating oil. Some premium filters state filtration efficiency down to 25 microns. However, it is particles engine oil filters effectively remove contaminant particles larger than 40 -50 microns from smaller than these, which accumulate in the oil, damage the filter, and force regular and frequent oil

  10. Measurement of MTF Target Plasma Temperature Using Filtered Silicon Photodiodes

    E-Print Network [OSTI]

    Measurement of MTF Target Plasma Temperature Using Filtered Silicon Photodiodes Presented at the 40 Plasma Temperature Using Filtered Silicon Photodiodes Magnetized Target Fusion (MTF) is an approach photodiodes, and a plasma-density interferometer. The data obtained from the array of seven filtered silicon

  11. A TOWED PUMP AND SHIPBOARD FILTERING SYSTEM FOR SAMPLING

    E-Print Network [OSTI]

    ;452: A TOWED PUMP AND SHIPBOARD FILTERING SYSTEM FOR SAMPLING SMALL ZOOPLANKTERS ,.^^»»r, Commissioner BUREAU OF Commercial Fisheries, Donald L. McKernan, Director A TOWED PUMP AND SHIPBOARD FILTERING Performance 13 Discussion 17 Summary 18 Literature cited 19 111 #12;#12;A TOWED PUMP AND SHIPBOARD FILTERING

  12. KALMAN FILTER WITH PHASE SPECTRUM COMPENSATION ALGORITHM FOR SPEECH ENHANCEMENT

    E-Print Network [OSTI]

    KALMAN FILTER WITH PHASE SPECTRUM COMPENSATION ALGORITHM FOR SPEECH ENHANCEMENT Stephen So, Kamil K with a recent speech enhancement technique, called the phase spectrum compen- sation procedure, or PSC. More-- Kalman filter, phase spectrum compensation (PSC), speech enhancement 1. INTRODUCTION The Kalman filter

  13. Atmospheric Environment 41 (2007) 31513160 Ozone removal by HVAC filters

    E-Print Network [OSTI]

    Siegel, Jeffrey

    Atmospheric Environment 41 (2007) 3151­3160 Ozone removal by HVAC filters P. Zhao, J.A. Siegel?, R May 2006; accepted 14 June 2006 Abstract Residential and commercial HVAC filters that have been loaded of the relative importance of HVAC filters as a removal mechanism for ozone in residential and commercial

  14. Fracture behavior of advanced ceramic hot gas filters: Final report

    SciTech Connect (OSTI)

    Singh, J.P.; Majumdar, S.; Sutaria, M.; Bielke, W. [Argonne National Lab., IL (United States). Energy Technology Div.

    1997-03-01T23:59:59.000Z

    This report presents the results of mechanical/microstructural evaluation, thermal shock/fatigue testing, and stress analyses of advanced hot-gas filters obtained from different manufacturers. These filters were fabricated from both monolithic ceramics and composites. The composite filters, made of both oxide and nonoxide materials, were in both as-fabricated and exposed conditions, whereas the monolithic filters were made only of nonoxide materials. Mechanical property measurement of composite filters included diametral compression testing with O-ring specimens and burst-testing of short filter segments with rubber plugs. In-situ strength of fibers in the composite filters was evaluated by microscopic technique. Thermal shock/fatigue resistance was estimated by measuring the strengths of filter specimens before and after thermal cycling from an air environment at elevated temperatures to a room temperature oil bath. Filter performance during mechanical and thermal shock/fatigue loadings was correlated with microstructural observations. Micromechanical models were developed to derive properties of composite filter constituents on the basis of measured mechanical properties of the filters. Subsequently, these properties were used to analytically predict the performance of composite filters during thermal shock loading.

  15. Optimizing performance of ceramic pot filters in Northern Ghana and modeling flow through paraboloid-shaped filters/

    E-Print Network [OSTI]

    Miller, Travis Reed

    2010-01-01T23:59:59.000Z

    This work aimed to inform the design of ceramic pot filters to be manufactured by the organization Pure Home Water (PHW) in Northern Ghana, and to model the flow through an innovative paraboloid-shaped ceramic pot filter. ...

  16. Overlap zoned electrically heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Chapman, Mark R [Brighton, MI

    2011-07-19T23:59:59.000Z

    A system includes a particulate matter (PM) filter that includes an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than or equal to one, and wherein the N zones and the M sub-zones are arranged in P layers, where P is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  17. Process for making ceramic hot gas filter

    DOE Patents [OSTI]

    Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

    2001-01-01T23:59:59.000Z

    A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

  18. A Novel Technique for Inferior Vena Cava Filter Extraction

    SciTech Connect (OSTI)

    Johnston, Edward William, E-mail: ed.johnston@doctors.org.uk; Rowe, Luke Michael Morgan; Brookes, Jocelyn; Raja, Jowad; Hague, Julian, E-mail: julian.hague@uclh.nhs.uk [University College Hospital, Multidisciplinary Endovascular Team (United Kingdom)

    2013-05-02T23:59:59.000Z

    Inferior vena cava (IVC) filters are used to protect against pulmonary embolism in high-risk patients. Whilst the insertion of retrievable IVC filters is gaining popularity, a proportion of such devices cannot be removed using standard techniques. We describe a novel approach for IVC filter removal that involves snaring the filter superiorly along with the use of flexible forceps or laser devices to dissect the filter struts from the caval wall. This technique has used to successfully treat three patients without complications in whom standard techniques failed.

  19. Adaptive filters for detection of gravitational waves from coalescing binaries

    SciTech Connect (OSTI)

    Eleuteri, Antonio; Milano, Leopoldo; De Rosa, Rosario; Garufi, Fabio; Acernese, Fausto; Barone, Fabrizio; Giordano, Lara; Pardi, Silvio [Dip. di Scienze Fisiche, Universita di Napoli 'Federico II', via Cintia, I-80126 Naples (Italy) and INFN sez. Napoli, via Cintia, I-80126 Naples (Italy); Dip. di Scienze Farmaceutiche, Universita di Salerno, via Ponte Don Melillo, 84084 Fisciano (Saudi Arabia) (IT) and INFN sez. Napoli, via Cintia, I-80126 Naples (Italy); Dip. di Matematica ed Applicazioni, Universita di Napoli 'Federico II', via Cintia, I-80126 Naples (Italy) and INFN sez. Napoli, via Cintia, I-80126 Naples (Italy)

    2006-06-15T23:59:59.000Z

    In this work we propose use of infinite impulse response adaptive line enhancer (IIR ALE) filters for detection of gravitational waves from coalescing binaries. We extend our previous work and define an adaptive matched filter structure. Filter performance is analyzed in terms of the tracking capability and determination of filter parameters. Furthermore, following the Neyman-Pearson strategy, receiver operating characteristics are derived, with closedform expressions for detection threshold, false alarm, and detection probability. Extensive tests demonstrate the effectiveness of adaptive filters both in terms of small computational cost and robustness.

  20. Compact cyclone filter train for radiological and hazardous environments

    DOE Patents [OSTI]

    Bench, T.R.

    1998-04-28T23:59:59.000Z

    A compact cyclone filter train is disclosed for the removal of hazardous and radiological particles from a gaseous fluid medium. This filter train permits a small cyclone separator to be used in a very small space envelope due to the arrangement of the filter housing adjacent to the separator with the cyclone separator and the filters mounted on a plate. The entire unit will have a hoist connection at the center of gravity so that the entire unit including the separator, the filters, and the base can be lifted and repositioned as desired. 3 figs.

  1. Generator powered electrically heated diesel particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V; Paratore, Jr., Michael J

    2014-03-18T23:59:59.000Z

    A control circuit for a vehicle powertrain includes a switch that selectivity interrupts current flow between a first terminal and a second terminal. A first power source provides power to the first terminal and a second power source provides power to the second terminal and to a heater of a heated diesel particulate filter (DPF). The switch is opened during a DPF regeneration cycle to prevent the first power source from being loaded by the heater while the heater is energized.

  2. Digital filter design approach for SQUID gradiometers

    SciTech Connect (OSTI)

    Bruno, A.C.; Ribeiro, P.C.

    1988-04-15T23:59:59.000Z

    A review of the traditional method for designing gradiometers is made. A nonrecursive digital filter model for the gradiometer is presented, giving a new set of parameters for the gradiometer identification. Some designs are analyzed using the proposed set. As an example, a true differentiator is designed to be used as the SQUID input coil. It is shown that the differentiator has the same noise rejection as the conventional gradiometer but provides more signal sensitivity.

  3. Harmonic filter assessments at a Battery Plant

    SciTech Connect (OSTI)

    Adams, R.; Davis, J.; Callaghan, P.; Ray, L.

    1995-12-31T23:59:59.000Z

    The facility set a peak demand of just over four megawatts in the twelve months prior to the plant expansion work. It contains 831 rectifier circuits, which represent about 60% of the plant load. Production is divided between building the batteries and charging them. The charging load can be carried based on production, or based on other parameters such as cost of electricity. The plant is served at 480 volts from Duke`s 44-kV sub-transmission system. Prior to the expansion, Duke operated two 1200-kvar switched capacitor banks on the 480-V bus for voltage regulation. After the expansion, Duke removed the capacitors and Freeborn installed a 1016-kvar switched harmonic filter on each delivery point. Inside the plant, Exide operates twelve 84-kvar harmonic filters on individual feeders. All harmonic filters are tuned to the 4.7th harmonic. As mentioned above, Exide operates 831 rectifier circuits. The typical AC system serving rectifiers consists of a 460/230-V transformer, connected wye-delta, rated at 124 kVA. This transformer serves 16 rectifiers. Note that the six-pulse bridge circuit consists of uncontrolled diodes. DC current control is achieved by adjusting current flow through the saturable AC reactors.

  4. Emergency sacrificial sealing method in filters, equipment, or systems

    DOE Patents [OSTI]

    Brown, Erik P

    2014-09-30T23:59:59.000Z

    A system seals a filter or equipment component to a base and will continue to seal the filter or equipment component to the base in the event of hot air or fire. The system includes a first sealing material between the filter or equipment component and the base; and a second sealing material between the filter or equipment component and the base and proximate the first sealing material. The first sealing material and the second seal material are positioned relative to each other and relative to the filter or equipment component and the base to seal the filter or equipment component to the base and upon the event of fire the second sealing material will be activated and expand to continue to seal the filter or equipment component to the base in the event of hot air or fire.

  5. NON RESIDENT ALIEN REQUIRED DOCUMENTS CLASSIFICATION REQUIRED ATTACHEMENTS MUST BE SUBMITTED WITH THE

    E-Print Network [OSTI]

    Adali, Tulay

    NON RESIDENT ALIEN REQUIRED DOCUMENTS CLASSIFICATION REQUIRED ATTACHEMENTS MUST BE SUBMITTED WITH THE PAYROLL DOCUMENTS AND CITIZENSHIP STATUS FORM Permanent Resident Resident Alien Card, or I-551 Stamped

  6. FALSIFICATION OF INFORMATION POLICY Students registering and submitting resumes on MySpartanCareer.com certify

    E-Print Network [OSTI]

    Liu, Taosheng

    FALSIFICATION OF INFORMATION POLICY Students registering and submitting resumes on My in your MySpartanCareer.com profile, resume, or other application materials, MSU Career Services

  7. Fail Save Shut Off Valve for Filtering Systems Employing Candle Filters

    DOE Patents [OSTI]

    VanOsdol, John

    2006-01-03T23:59:59.000Z

    The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

  8. Fail save shut off valve for filtering systems employing candle filters

    DOE Patents [OSTI]

    VanOsdol, John (Fairmont, WV)

    2006-01-03T23:59:59.000Z

    The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

  9. Qualifications of Candle Filters for Combined Cycle Combustion Applications

    SciTech Connect (OSTI)

    Tomasz Wiltowski

    2008-08-31T23:59:59.000Z

    The direct firing of coal produces particulate matter that has to be removed for environmental and process reasons. In order to increase the current advanced coal combustion processes, under the U.S. Department of Energy's auspices, Siemens Westinghouse Power Corporation (SWPC) has developed ceramic candle filters that can operate at high temperatures. The Coal Research Center of Southern Illinois University (SIUC), in collaboration with SWPC, developed a program for long-term filter testing at the SIUC Steam Plant followed by experiments using a single-filter reactor unit. The objectives of this program funded by the U.S. Department of Energy were to identify and demonstrate the stability of porous candle filter elements for use in high temperature atmospheric fluidized-bed combustion (AFBC) process applications. These verifications were accomplished through extended time slipstream testing of a candle filter array under AFBC conditions using SIUC's existing AFBC boiler. Temperature, mass flow rate, and differential pressure across the filter array were monitored for a duration of 45 days. After test exposure at SIUC, the filter elements were characterized using Scanning Electron Microscopy and BET surface area analyses. In addition, a single-filter reactor was built and utilized to study long term filter operation, the permeability exhibited by a filter element before and after the slipstream test, and the thermal shock resilience of a used filter by observing differential pressure changes upon rapid heating and cooling of the filter. The data acquired during the slipstream test and the post-test evaluations demonstrated the suitability of filter elements in advanced power generation applications.

  10. Properties and characterization of an oxide/oxide composite filter

    SciTech Connect (OSTI)

    Lane, J.E.; Painter, C.J.; Su, W.F.A.; Radford, K.C. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center; LeCostaouec, J.F. [Techniweave, Inc., Rochester, NH (United States)

    1996-12-31T23:59:59.000Z

    Westinghouse, with Techniweave as a major subcontractor, is conducting a three-phase program aimed at providing advanced candle filters for a 1997 pilot scale demonstration in one of the two hot gas filter system at Southern Company Service`s Wilsonville PSD Facility. This program`s objective is to develop an oxide CFCC (continuous fiber ceramic composite) candle filter that is cost competitive with prototype next generation filters through the development of a low cost sol-gel fabrication process and a 3D fiber architecture optimized for high volume filter manufacturing. Phase 1, Filter Material Development and Evaluation, results will be presented. Phase 1 activities included laboratory-scale development, characterization, and testing of a mullite matrix 3D fiber-reinforced (Nextel 550) ceramic composite filter material. Eleven 3D architectures were designed, preforms and ceramic matrix composite (CMC) filter materials were made, tested and evaluated. The CMC fabrication process was optimized for reduced cost and acceptable filter performance. Permeability, 4-pt bend and microstructural evaluation results, previously presented, were used to downselect to one 3D architecture and CMC processing method. The downselected filter material was fabricated and tested via permeability and 4-pt bend; Weibull modulus was determined. High-temperature flow-through corrosion tests and thermal aging tests in static air up to 5,000 h were conducted. SEM and XRD have been used to characterize microstructural and phase changes, if any, from high temperature exposure testing. Weaving feasibility studies for the flange and the closed end of a candle filter have been conducted in order to develop a low cost weaving method to make a single piece candle filter fiber preform. Results and conclusions for the evaluation of the downselected filter material above will be presented and discussed.

  11. Filter diagonalization of shell-model calculations

    SciTech Connect (OSTI)

    Mizusaki, Takahiro [Institute of Natural Sciences, Senshu University, Tokyo 101-8425 (Japan); Kaneko, Kazunari [Department of Physics, Kyushu Sangyo University, Fukuoka 813-8503 (Japan); Honma, Michio [Center for Mathematical Sciences, University of Aizu, Aizu-Wakamatsu, 965-8580 (Japan); Sakurai, Tetsuya [Department of Computer Science, University of Tsukuba, Tsukuba, 305-8573 (Japan)

    2010-08-15T23:59:59.000Z

    We present a method of filter diagonalization for shell-model calculations. This method is based on the Sakurai and Sugiura (SS) method, but extended with the help of the shifted complex orthogonal conjugate gradient (COCG) method. A salient feature of this method is that it can calculate eigenvalues and eigenstates in a given energy interval. We show that this method can be an alternative to the Lanczos method for calculating ground and excited states, as well as spectral strength functions. With an application to the M-scheme shell-model calculations we demonstrate that several inherent problems in the widely used Lanczos method can be removed or reduced.

  12. Dynamic data filtering system and method

    DOE Patents [OSTI]

    Bickford, Randall L; Palnitkar, Rahul M

    2014-04-29T23:59:59.000Z

    A computer-implemented dynamic data filtering system and method for selectively choosing operating data of a monitored asset that modifies or expands a learned scope of an empirical model of normal operation of the monitored asset while simultaneously rejecting operating data of the monitored asset that is indicative of excessive degradation or impending failure of the monitored asset, and utilizing the selectively chosen data for adaptively recalibrating the empirical model to more accurately monitor asset aging changes or operating condition changes of the monitored asset.

  13. Low pass filter for plasma discharge

    DOE Patents [OSTI]

    Miller, Paul A. (Albuquerque, NM)

    1994-01-01T23:59:59.000Z

    An isolator is disposed between a plasma reactor and its electrical energy source in order to isolate the reactor from the electrical energy source. The isolator operates as a filter to attenuate the transmission of harmonics of a fundamental frequency of the electrical energy source generated by the reactor from interacting with the energy source. By preventing harmonic interaction with the energy source, plasma conditions can be readily reproduced independent of the electrical characteristics of the electrical energy source and/or its associated coupling network.

  14. HEDL air filter examination system software

    SciTech Connect (OSTI)

    Stapleton, E.E.

    1984-10-01T23:59:59.000Z

    This document describes the system software and operation of the Hanford Engineering Development Laboratory (HEDL) air filter sample counting systems. Included are a description of how each program functions with flow charts, sample printouts, program listings and a listing with comments of test routines that exercise the hardware. This effort is a result of a work order from HEDL Operational Safety to the Instrument Calibration and Evaluations section of the Pacific Northwest Laboratory (PNL) to upgrade the HEDL counting systems to include standardization, radon subtraction, and detector cooling.

  15. Nuclear Filter Technology | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's HeatMexico:CommunityNorthwest Basin andNsbowde's blog Home >NuFilter

  16. Method of producing monolithic ceramic cross-flow filter

    DOE Patents [OSTI]

    Larsen, D.A.; Bacchi, D.P.; Connors, T.F.; Collins, E.L. III

    1998-02-10T23:59:59.000Z

    Ceramic filter of various configuration have been used to filter particulates from hot gases exhausted from coal-fired systems. Prior ceramic cross-flow filters have been favored over other types, but those previously have been assemblies of parts somehow fastened together and consequently subject often to distortion or delamination on exposure hot gas in normal use. The present new monolithic, seamless, cross-flow ceramic filters, being of one-piece construction, are not prone to such failure. Further, these new products are made by a novel casting process which involves the key steps of demolding the ceramic filter green body so that none of the fragile inner walls of the filter is cracked or broken. 2 figs.

  17. Method of producing monolithic ceramic cross-flow filter

    DOE Patents [OSTI]

    Larsen, David A. (Clifton Park, NY); Bacchi, David P. (Schenectady, NY); Connors, Timothy F. (Watervliet, NY); Collins, III, Edwin L. (Albany, NY)

    1998-01-01T23:59:59.000Z

    Ceramic filter of various configuration have been used to filter particulates from hot gases exhausted from coal-fired systems. Prior ceramic cross-flow filters have been favored over other types, but those previously horn have been assemblies of parts somehow fastened together and consequently subject often to distortion or delamination on exposure hot gas in normal use. The present new monolithic, seamless, cross-flow ceramic filters, being of one-piece construction, are not prone to such failure. Further, these new products are made by novel casting process which involves the key steps of demolding the ceramic filter green body so that none of the fragile inner walls of the filter is cracked or broken.

  18. Optical ranked-order filtering using threshold decomposition

    DOE Patents [OSTI]

    Allebach, J.P.; Ochoa, E.; Sweeney, D.W.

    1987-10-09T23:59:59.000Z

    A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed. 3 figs.

  19. Optical ranked-order filtering using threshold decomposition

    DOE Patents [OSTI]

    Allebach, Jan P. (West Lafayette, IN); Ochoa, Ellen (Pleasanton, CA); Sweeney, Donald W. (Alamo, CA)

    1990-01-01T23:59:59.000Z

    A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed.

  20. Submitted for Publication to SOLAR ENERGY PRODUCING SATELLITE-DERIVED IRRADIANCES IN COMPLEX ARID TERRAIN

    E-Print Network [OSTI]

    Perez, Richard R.

    Submitted for Publication to SOLAR ENERGY PRODUCING SATELLITE-DERIVED IRRADIANCES IN COMPLEX ARID spectrum. #12;Submitted for Publication to SOLAR ENERGY In its simplest description the model amounts wavelengths in the visible spectral range (0.55-0.75 µm) corresponding to the peak of the solar radiation

  1. Submitting an NIH Application? Major changes for due dates on or after

    E-Print Network [OSTI]

    Bandettini, Peter A.

    Submitting an NIH Application? Major changes for due dates on or after January 25, 2010: For more information, visit Enhancing Peer Review: http://enhancing-peer-review.nih for Application Submissions on or After January 25, 2010 General Information about Submitting Grants to NIH: http://grants.nih

  2. Incident Report An incident report should be submitted for any event involving

    E-Print Network [OSTI]

    Crawford, T. Daniel

    Incident Report An incident report should be submitted for any event involving: injury or illness fire explosion or implosion chemical exposure Minor cuts and scrapes need not be reported be reported. If a "near miss" might have had severe consequences, submit an incident report. You may also

  3. Submitted to Solar Energy (Nov. 2011) Complete article Accepted version (v1, Jul. 2012)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Submitted to Solar Energy (Nov. 2011) Complete article Accepted version (v1, Jul. 2012) 1 THE SG2-00725987,version1-16Oct2012 Author manuscript, published in "Solar Energy 88, 10 (2012) Pages 3072-3083" DOI : 10.1016/j.solener.2012.07.018 #12;Submitted to Solar Energy (Nov. 2011) Complete article

  4. Real Time Estimation of Ship Motions Using Kalman Filtering Techniques

    E-Print Network [OSTI]

    Triantafyllou, Michael S.

    1983-01-01T23:59:59.000Z

    The estimation of the heave, pitch, roll, sway, and yaw motions of a DD-963 destroyer is studied, using Kalman filtering

  5. Ash reduction system using electrically heated particulate matter filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Paratore, Jr., Michael J; He, Yongsheng [Sterling Heights, MI

    2011-08-16T23:59:59.000Z

    A control system for reducing ash comprises a temperature estimator module that estimates a temperature of an electrically heated particulate matter (PM) filter. A temperature and position estimator module estimates a position and temperature of an oxidation wave within the electrically heated PM filter. An ash reduction control module adjusts at least one of exhaust flow, fuel and oxygen levels in the electrically heated PM filter to adjust a position of the oxidation wave within the electrically heated PM filter based on the oxidation wave temperature and position.

  6. Development of SCR on Diesel Particulate Filter System for Heavy...

    Broader source: Energy.gov (indexed) [DOE]

    172012 Development of SCR on Diesel Particulate Filter System for Heavy Duty Applications Mojghan Naseri, Daniel Kucheruck, Hai-Ying Chen , Sougato Chatterjee DEER Conference 2012...

  7. Sparsity Optimization in Design of Multidimensional Filter Networks

    E-Print Network [OSTI]

    2014-11-22T23:59:59.000Z

    A FIR filter is represented in the spatial domain by a limited-size kernel defined by a ...... Muthukrishnan S (2005) Data streams: algorithms and applications.

  8. Diesel Soot Filter Characterization and Modeling for Advanced...

    Broader source: Energy.gov (indexed) [DOE]

    Reactor regeneration of soot loaded catalyzed SCF * Micro-model of soot oxidation versus spatial catalyst loading. 7 2008 DOE OVT Merit Review Diesel Soot Filter Characterization...

  9. A Retrospective Filter Trust Region Algorithm For Unconstrained ...

    E-Print Network [OSTI]

    2010-01-05T23:59:59.000Z

    In this paper, we propose a retrospective filter trust re- gion algorithm for .... [33] present the self-adaptive trust region methods and give some discussions about

  10. active filter employing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    type). Traditional design Wilamowski, Bogdan Maciej 25 Virtual active filters for HVDC networks using V2G technology F.R. Islam Engineering Websites Summary: ) technology is...

  11. MobiCleanTM Soot Filter for Diesel Locomotiive Applications

    Broader source: Energy.gov (indexed) [DOE]

    is trapped on the surface of a catalyzed, high temperature, wall flow, porous Silicon Carbide filter. Silicon Carbide provides superior thermal durability over metal fiber and...

  12. Diesel Soot Filter Characterization and Modeling for Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Automotive) Diesel Soot Filter Characterization and Modeling for Advanced Substrates (CRADA with DOW Automotive) Presentation from the U.S. DOE Office of Vehicle Technologies...

  13. Diesel Soot Filter Characterization and Modeling for Advanced...

    Broader source: Energy.gov (indexed) [DOE]

    Automotive) Diesel Soot Filter Characterization and Modeling for Advanced Substrates (CRADA and DOW Automotive) Presentation from the U.S. DOE Office of Vehicle Technologies...

  14. Performance of standard rate trickling filters at various depths

    E-Print Network [OSTI]

    Peralta-Rojas, Andres

    1955-01-01T23:59:59.000Z

    of '. he filter media+ The relathnship between removals snd applied loads for each of the units is Unearth they are represented in figso 8 to 15? The action inside each filter is somewhat s axzey The zeduction of suspended solids was satisfaoto... triokling filters . at ths Sewage Treat3sent Plant of' k and 5 College of Tax@st The criteria used for detsrsLining filter performance were reseval of' applied S, O. D?, renoval of suspended, solids, and rsaoval of volatile natter+ Ts; ts wsrs na;. 's...

  15. Evaluation of Alternative Filter Media for the Rotary Microfilter

    SciTech Connect (OSTI)

    Poirier, M. R.; Herman, D. T.; Bhave, R.

    2011-11-09T23:59:59.000Z

    The Savannah River Site is currently developing and testing several processes to treat high level radioactive liquid waste. Each of these processes has a solid-liquid separation process that limits its throughput. Savannah River National Laboratory researchers identified and tested the rotary microfilter as a technology to increase solid-liquid separation throughput. The authors believe the rotary microfilter throughput can be improved by using a better filter membrane. Previous testing showed that asymmetric filters composed of a ceramic membrane on top of a stainless steel support produced higher filter flux than 100% stainless steel symmetric filters in crossflow filter tests. Savannah River National Laboratory and Oak Ridge National Laboratory are working together to develop asymmetric ceramic ? stainless steel composite filters and asymmetric 100% stainless steel filters to improve the throughput of the rotary microfilter. The Oak Ridge National Laboratory Inorganic Membrane Group fabricated samples of alternative filter membranes. In addition, Savannah River National Laboratory obtained samples of filter membranes from Pall, Porvair, and SpinTek. They tested these samples in a static test cell with feed slurries containing monosodium titanate and simulated sludge.

  16. Improvement and Simplification of Diesel Particulate Filter System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improvement and Simplification of Diesel Particulate Filter System using a Ceria-Based Fuel-Borne Catalyst in Serial Applications Improvement and Simplification of Diesel...

  17. Optimal design of AC filter circuits in HVDC converter stations

    SciTech Connect (OSTI)

    Saied, M.M.; Khader, S.A. [Kuwait Univ. (Kuwait). Electrical and Computer Engineering Dept.

    1995-12-31T23:59:59.000Z

    This paper investigates the reactive power as well as the harmonic conditions on both the valve and the AC-network sides of a HVDC converter station. The effect of the AC filter circuits is accurately modeled. The program is then augmented by adding an optimization routine. It can identify the optimal filter configuration, yielding the minimum current distortion factor at the AC network terminals for a prespecified fundamental reactive power to be provided by the filter. Several parameter studies were also conducted to illustrate the effect of accidental or intentional deletion of one of the filter branches.

  18. Biodiesel Effects on Diesel Particle Filter Performance: Milestone Report

    SciTech Connect (OSTI)

    Williams, A.; McCormick, R. L.; Hayes, R.; Ireland, J.

    2006-03-01T23:59:59.000Z

    Research results on the performance of biodiesel and biodiesel blends with ultra-low sulfur diesel (ULSD) and a diesel particle filter (DPF).

  19. Effect of Biodiesel Blends on Diesel Particulate Filter Performance

    SciTech Connect (OSTI)

    Williams, A.; McCormick, R. L.; Hayes, R. R.; Ireland, J.; Fang, H. L.

    2006-11-01T23:59:59.000Z

    Presents results of tests of ultra-low sulfur diesel blended with soy-biodiesel at 5 percent using a Cummins ISB engine with a diesel particulate filter.

  20. DEVELOPMENT OF AN ADHESIVE CANDLE FILTER SAFEGUARD DEVICE

    SciTech Connect (OSTI)

    John P. Hurley; Ann K. Henderson; Jan W. Nowok; Michael L. Swanson

    2002-01-01T23:59:59.000Z

    In order to reach the highest possible efficiencies in a coal-fired turbine-based power system, the turbine should be directly fired with the products of coal conversion. Two main types of systems employ these turbines: those based on pressurized fluidized-bed combustors and those based on integrated gasification combined cycles. In both systems, suspended particulates must be cleaned from the gas stream before it enters the turbine so as to prevent fouling and erosion of the turbine blades. To produce the cleanest gas, barrier filters are being developed and are in use in several facilities. Barrier filters are composed of porous, high-temperature materials that allow the hot gas to pass but collect the particulates on the surface. The three main configurations of the barrier filters are candle, cross-flow, and tube filters. Both candle and tube filters have been tested extensively. They are composed of coarsely porous ceramic that serves as a structural support, overlain with a thin, microporous ceramic layer on the dirty gas side that serves as the primary filter surface. They are highly efficient at removing particulate matter from the gas stream and, because of their ceramic construction, are resistant to gas and ash corrosion. However, ceramics are brittle and individual elements can fail, allowing particulates to pass through the hole left by the filter element and erode the turbine. Preventing all failure of individual ceramic filter elements is not possible at the present state of development of the technology. Therefore, safeguard devices (SGDs) must be employed to prevent the particulates streaming through occasional broken filters from reaching the turbine. However, the SGD must allow for the free passage of gas when it is not activated. Upon breaking of a filter, the SGD must either mechanically close or quickly plug with filter dust to prevent additional dust from reaching the turbine. Production of a dependable rapidly closing autonomous mechanical device at high temperatures in a dusty gas stream is difficult because of problems with materials corrosion, dust leakage, and detection of filter failure. Therefore, the Energy & Environmental Research Center is using its knowledge of the factors that make filter dust sticky at gas filtration temperatures to make a simple and inexpensive SGD that employs an adhesive yet thermodynamically stable coating on a highly porous ceramic substrate. The SGDs are placed on top of individual candle filters at the filtered gas exit. Upon failure of the filter, the dirty gas flows through the SGD where the adhesive surface rapidly and permanently traps dust particles, causing the device to plug and prevent the dust from reaching the turbine.

  1. Scheduling and allocation algorithm for an elliptic filter

    E-Print Network [OSTI]

    Marikkannan, Sangeetha

    2012-01-01T23:59:59.000Z

    A new evolutionary algorithm for scheduling and allocation algorithm is developed for an elliptic filter. The elliptic filter is scheduled and allocated in the proposed work which is then compared with the different scheduling algorithms like As Soon As Possible algorithm, As Late As Possible algorithm, Mobility Based Shift algorithm, FDLS, FDS and MOGS. In this paper execution time and resource utilization is calculated using different scheduling algorithm for an Elliptic Filter and reported that proposed Scheduling and Allocation increases the speed of operation by reducing the control step. The proposed work to analyse the magnitude, phase and noise responses for different scheduling algorithm in an elliptic filter.

  2. Optofluidic-Tunable Color Filters And Spectroscopy Based On Liquid...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Based On Liquid-Crystal Microflows. Abstract: The integration of color filters with microfluidics has attracted substantial attention in recent years, for on-chip absorption,...

  3. Modulated power filter compensator for a small renewable wind energy.

    E-Print Network [OSTI]

    Almadhi, Bassil

    2015-01-01T23:59:59.000Z

    ??This paper has three sections, the first one is related to wind energy, the second is related to power filters used to mitigate the harmonics, (more)

  4. Compact cyclone filter train for radiological and hazardous environments

    DOE Patents [OSTI]

    Bench, Thomas R. (Pittsburgh, PA)

    1998-01-01T23:59:59.000Z

    A compact cyclone filter train for the removal of hazardous and radiologi particles from a gaseous fluid medium which permits a small cyclone separator to be used in a very small space envelope due to the arrangement of the filter housing adjacent to the separator with the cyclone separator and the filters mounted on a plate. The entire unit will have a hoist connection at the center of gravity so that the entire unit including the separator, the filters, and the base can be lifted and repositioned as desired.

  5. Kalman Filter Constraint Switching for Turbofan Engine Health Estimation

    E-Print Network [OSTI]

    Simon, Dan

    , Estimation, Quadratic Pro- gramming, Residuals, Gas Turbine Engines. 1 Introduction For linear dynamic. However, in the application of Kalman filters there is often known model or signal information

  6. Conference Proceedings, 2011 Low Impact Development Symposium, Submitted, March 2012 Economic and Adaptation Benefits of Low Impact Development

    E-Print Network [OSTI]

    Conference Proceedings, 2011 Low Impact Development Symposium, Submitted, March 2012 1 Economic.ballestero@unh.edu; web: www.unh.edu/unhsc/. #12;Conference Proceedings, 2011 Low Impact Development Symposium, Submitted

  7. Electromagnetic interference filter for automotive electrical systems

    DOE Patents [OSTI]

    Herron, Nicholas Hayden; Carlson, Douglas S; Tang, David; Korich, Mark D

    2013-07-02T23:59:59.000Z

    A filter for an automotive electrical system includes a substrate having first and second conductive members. First and second input terminals are mounted to the substrate. The first input terminal is electrically connected to the first conductive member, and the second input terminal is electrically connected to the second conductive member. A plurality of capacitors are mounted to the substrate. Each of the capacitors is electrically connected to at least one of the first and second conductive members. First and second power connectors are mounted to the substrate. The first power connector is electrically connected to the first conductive member, and the second power connector is electrically connected to the second conductive member. A common mode choke is coupled to the substrate and arranged such that the common mode choke extends around at least a portion of the substrate and the first and second conductive members.

  8. The APM/Matched-Filter Cluster Catalog

    E-Print Network [OSTI]

    Wataru Kawasaki

    1999-12-15T23:59:59.000Z

    A catalog of nearby clusters in the 5800 deg$^2$ area in the southern Galactic cap is constructed by applying a matched-filter cluster-finding algorithm to the sample of 3.3 million galaxies from the APM Galaxy Survey. I have preliminarily detected more than 4000 cluster candidates with estimated redshift of less than 0.2 and with richness similar to those of ACO clusters. Generally, a good correspondence is found between the nearest cluster candidates in our catalog and the ACO clusters which have measured redshift. While the ACO catalog becomes incomplete at z>0.08, the completeness limit of our cluster catalog reaches z=0.15.

  9. Model-Based Commissioning for Filters in Room Air Conditioners

    E-Print Network [OSTI]

    Wang, F.; Yoshida, H.; Kitagawa, H.; Matsumoto, K.; Goto, K.

    2004-01-01T23:59:59.000Z

    This paper proposes a model that can estimate filter resistance. Two sorts of value are used as inputs to estimate filter resistance. One is the power consumed by the fan in the indoor unit and the other is the thermal performance. For the room air...

  10. Biomass Control in Waste Air Biotrickling Filters by Protozoan Predation

    E-Print Network [OSTI]

    Biomass Control in Waste Air Biotrickling Filters by Protozoan Predation Huub H. J. Cox, Marc A as a means of biomass control. Wet biomass for- mation in 23.6-L reactors over a 77-day period was reduced in the biotrickling filter enriched with protozoa. The lower rate of biomass accumulation after the addi- tion

  11. Response of HEPA filters to simulated-accident conditions

    SciTech Connect (OSTI)

    Gregory, W.S.; Martin, R.A.; Smith, P.R.; Fenton, D.E.

    1982-01-01T23:59:59.000Z

    High-efficiency particulate air (HEPA) filters have been subjected to simulated accident conditions to determine their response to abnormal operating events. Both domestic and European standard and high-capacity filters have been evaluated to determine their response to simulated fire, explosion, and tornado conditions. The HEPA filter structural limitations for tornado and explosive loadings are discussed. In addition, filtration efficiencies during these accident conditions are reported for the first time. Our data indicate efficiencies between 80% and 90% for shock loadings below the structural limit level. We describe two types of testing for ineffective filtration - clean filters exposed to pulse-entrained aerosol and dirty filters exposed to tornado and shock pulses. Efficiency and material loss data are described. Also, the resonse of standard HEPA filters to simulated fire conditions is presented. We describe a unique method of measuring accumulated combustion products on the filter. Additionally, data relating to pressure drop vs accumulated mass during plugging are reported for simulated combustion aerosols. The effects of concentration and moisture levels on filter plugging were evaluated. We are obtaining all of the above data so that mathematical models can be developed for fire, explosion, and tornado accident analysis computer codes. These computer codes can be used to assess the response of nuclear air cleaning systems to accident conditions.

  12. SPEECH ENHANCEMENT USING A STATISTICALLY DERIVED FILTER MAPPING

    E-Print Network [OSTI]

    Kabal, Peter

    SPEECH ENHANCEMENT USING A STATISTICALLY DERIVED FILTER MAPPING Yan Ming Cheng, Douglas, Quebec H3E 1H6 Canada Abstract We view the speech enhancement task in two aspects: reduc- tion Mapping (NISSM) to estimate a speech enhancement Wiener filter. NISSM consists of a noise

  13. A SIMPLIFIED ANALYSIS FOR HIGH POWER MICROWAVE BANDPASS FILTER STRUCTURES

    E-Print Network [OSTI]

    Yu, Ming

    and wireless diplexers. An exact analysis of the voltage/power distribution inside a filter involves the 3D is derived. This transformation is then used to relate the actual voltage distribution inside a transmissionA SIMPLIFIED ANALYSIS FOR HIGH POWER MICROWAVE BANDPASS FILTER STRUCTURES Apu Sivadas, Ming Yu

  14. Department of Mechanical Engineering Spring 2012 HVAC Filter Sensor -Global

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Mechanical Engineering Spring 2012 HVAC Filter Sensor - Global Overview The purpose of this project is to develop a heating, ventilation, and air conditioning (HVAC) monitoring a residential, forced flow, multi-zone HVAC filter needs to be replaced, and then alerts the users

  15. 3D Wavelet-Based Filter and Method

    DOE Patents [OSTI]

    Moss, William C. (San Mateo, CA); Haase, Sebastian (San Francisco, CA); Sedat, John W. (San Francisco, CA)

    2008-08-12T23:59:59.000Z

    A 3D wavelet-based filter for visualizing and locating structural features of a user-specified linear size in 2D or 3D image data. The only input parameter is a characteristic linear size of the feature of interest, and the filter output contains only those regions that are correlated with the characteristic size, thus denoising the image.

  16. PREDICTIVE FILTERING FOR ATTITUDE ESTIMATION WITHOUT RATE SENSORS

    E-Print Network [OSTI]

    Crassidis, John L.

    .g., three-axis magnetometers, sun sensors, star trackers, etc.). The new real-time nonlinear filter predicts the attitude of the Solar, Anomalous, Magnetospheric Particle Explorer (SAMPEX) spacecraft. Results using anomalous periods, such as solar eclipse and/or vector-measurement co-alignment. The Kalman filter has been

  17. Spreadsheet Filtering by FFT Gaussian-based Convolution

    E-Print Network [OSTI]

    Randall D. Peters

    2004-06-18T23:59:59.000Z

    Filtering of digital signals is accomplished on an Excel spreadsheet using fast Fourier transform (FFT) convolution in which the kernel is either a Gaussian or a cosine modulated Gaussian. Pedagogical examples of low-pass and band-pass filtering are provided, and the practical value of the spreadsheet is illustrated with some cases involving an earthquake record generated by a folded pendulum seismometer.

  18. absorption filter method: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    absorption filter method First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Filtering Methods Andras Fulop...

  19. DEVELOPMENT OF A CANDLE FILTER FAILURE SAFEGUARD DEVICE

    SciTech Connect (OSTI)

    Todd R. Snyder

    2002-03-29T23:59:59.000Z

    The full-flow mechanical safeguard device (FFMSGD) has been developed under contract to the National Energy Technology Laboratory (NETL) to address problems with the reliability of ceramic candle filter elements installed on high-temperature, high-pressure (HTHP) Hot Gas Cleanup (HGCU) filters. Although systems candle filters are expected to perform satisfactorily when in good operating condition, the failure of even a single filter element can increase the filter system outlet dust loading enough to potentially damage gas turbine blades, contaminate other downstream processes, and limit the availability of the power system. Filter failure safeguard devices that are installed on each individual candle filter element are envisioned as a guarantee of a candle filter system's ability to withstand some number of element failures and continue operation without these negative consequences. The intention of the FFMSGD is to provide this guarantee without incurring any significant pressure drop penalty or constraining the filter system's reverse-pulse cleaning procedures. The FFMSGD provides a clear flow path for filtered and reverse-flow cleaning gases when its filter element is intact, and activates to provide a positive mechanical seal against gas flow in either direction when its filter element breaks or fails. This activation is induced by the increase in the flow rate of gas through the device in event of filter failure. The FFMSGD is designed to be easily removed and reconditioned when the filter system is taken off line for routine maintenance. This report is intended to be issued with a companion appendix. As instructed in Section J.12 of Contract No. DE-AC26-99FT40678, all the restricted, proprietary, and patentable information (not yet disclosed through the patent application process) related to the FFMSGD and its evaluation under this contract has been included only in the appendix. This Final Report, which is available to the public, contains background information and general descriptions of the operating principles of the FFMSGD. This report also describes the results of various evaluations of the device at room temperature and in HTHP environments. This Final Report also includes discussions of commercialization issues. For clarity and completeness, all of the information contained in this Final Report has also been included in the appendix.

  20. Manuscript Submitted to Solar Energy 4/2002 A NEW OPERATIONAL SATELLITE-TO-IRRADIANCE MODEL DESCRIPTION AND VALIDATION

    E-Print Network [OSTI]

    Perez, Richard R.

    Manuscript Submitted to Solar Energy 4/2002 A NEW OPERATIONAL SATELLITE-TO-IRRADIANCE MODEL, OR, USA #12;Manuscript Submitted to Solar Energy 4/2002 ABSTRACT We present a new simple model zenith angle to account for first order solar #12;Manuscript Submitted to Solar Energy 4/2002 geometry

  1. Part I of Manuscript submitted to Sedimentology, May, 2006 Unraveling the conundrum of river response to rising sea level

    E-Print Network [OSTI]

    Parker, Gary

    Part I of Manuscript submitted to Sedimentology, May, 2006 1 Unraveling the conundrum of river of Manuscript submitted to Sedimentology, May, 2006 2 Fly-Strickland River system, Papua New Guinea to Holocene of Manuscript submitted to Sedimentology, May, 2006 3 Mississippi River was able to resist drowning due to sea

  2. Campus Health/forms/2013,06,07 AGREEMENT TO SUBMIT TO AN ALCOHOL AND/OR DRUG TEST

    E-Print Network [OSTI]

    Campus Health/forms/2013,06,07 AGREEMENT TO SUBMIT TO AN ALCOHOL AND/OR DRUG TEST AND AUTHORIZATION FOR THE RELEASE OF TEST RESULTS I have been requested by LSUHSC to submit to an alcohol and/or drug test and/or drug test is completely voluntary on my part and that I have the right to refuse to submit

  3. Internship Opportunities with Oregon's Congressional Delegation To apply: submit resume, writing sample, cover letter and three references

    E-Print Network [OSTI]

    Escher, Christine

    Internship Opportunities with Oregon's Congressional Delegation To apply: submit resume, writing://merkley.senate.gov/services/internships/ To apply: submit cover letter, resume, writing sample (://wyden.senate.gov/constituents/internship.cfm To apply: submit cover letter, resume and application (available online) David Wu (OR-1) Application

  4. Polarization-independent optical wavelength filter for channel dropping applications

    DOE Patents [OSTI]

    Deri, Robert J. (Pleasanton, CA); Patterson, Frank (Livermore, CA)

    1996-01-01T23:59:59.000Z

    The polarization dependence of optical wavelength filters is eliminated by using waveguide directional couplers. Material birefringence is used to compensate for the waveguide (electromagnetic) birefringence which is the original cause of the polarization dependence. Material birefringence is introduced in a controllable fashion by replacing bulk waveguide layers by finely layered composites, such as multiple quantum wells using III-V semiconductor materials. The filter has use in wavelength-division-multiplexed fiber optic communication systems. This filter has broad application for wavelength-tunable receivers in fiber optic communication links, which may be used for telecommunications, optical computer interconnect links, or fiber optic sensor systems. Since multiple-wavelength systems are increasingly being used for all of these applications, the filter is useable whenever a rapidly tunable, wavelength-filtering receiver is required.

  5. Use of adaptive matching filters to improve reservoir definition

    SciTech Connect (OSTI)

    DuBose, J.B. Jr; Blackwelder, B.

    1995-12-31T23:59:59.000Z

    Improvements in seismic resolution through better seismic acquisition and processing coupled with geometric improvements provided by 3-D surveys should allow better depiction of reservoir settings. To more fully benefit from these data improvements, is is desirable to translate the seismic acoustic attributes into a form that has more lithologic meaning. Tuning and thin bed effects etc. are automatically taken into account, and the acoustic data rendered into rock terms by matched filtering. The advantage of the present method is that the matching filter is allowed to adapt over time, but only slowly. The result is adaptive filters that give better prediction of lithologic characteristics in areas adjacent to the control data. Slowly adaptive matching filters can provide better prediction of reservoir characteristics between control points (wells). Such techniques are particularly suitable in multiwell settings where it is possible to frequently calibrate the filters.

  6. Polarization-independent optical wavelength filter for channel dropping applications

    DOE Patents [OSTI]

    Deri, R.J.; Patterson, F.

    1996-05-07T23:59:59.000Z

    The polarization dependence of optical wavelength filters is eliminated by using waveguide directional couplers. Material birefringence is used to compensate for the waveguide (electromagnetic) birefringence which is the original cause of the polarization dependence. Material birefringence is introduced in a controllable fashion by replacing bulk waveguide layers by finely layered composites, such as multiple quantum wells using III-V semiconductor materials. The filter has use in wavelength-division multiplexed fiber optic communication systems. This filter has broad application for wavelength-tunable receivers in fiber optic communication links, which may be used for telecommunications, optical computer interconnect links, or fiber optic sensor systems. Since multiple-wavelength systems are increasingly being used for all of these applications, the filter is useable whenever a rapidly tunable, wavelength-filtering receiver is required. 14 figs.

  7. Development of ceramic composite hot-gas filters

    SciTech Connect (OSTI)

    Judkins, R.R.; Stinton, D.P. [Oak Ridge National Lab., TN (United States); Smith, R.G.; Fischer, E.M.; Eaton, J.H.; Weaver, B.L.; Kahnke, J.L.; Pysher, D.J. [3M Co., St. Paul, MN (United States)

    1995-04-01T23:59:59.000Z

    A novel type of hot-gas filter based on a ceramic fiber-reinforced ceramic matrix was developed and extended to fullsize, 60-mm OD by 1.5-meter-long, candle filters. A commercially viable process for producing the filters was developed, and the filters are undergoing testing and demonstration throughout the world for applications in pressurized fluidized-bed combustion (PFBC) and integrated gasification combined cycle (IGCC) plants. Development activities at Oak Ridge National Laboratory (ORNL) and at the 3M Company, and testing at the Westinghouse Science and Technology Center (STC) are presented. Demonstration tests at the Tidd PFBC are underway. Issues identified during the testing and demonstration phases of the development are discussed. Resolution of the issues and the status of commercialization of the filters are described.

  8. METAL FILTERS FOR PRESSURIZED FLUID BED COMBUSTION (PFBC) APPLICATIONS

    SciTech Connect (OSTI)

    M.A. Alvin

    2004-01-02T23:59:59.000Z

    Advanced coal and biomass-based gas turbine power generation technologies (IGCC, PFBC, PCFBC, and Hipps) are currently under development and demonstration. Efforts at the Siemens Westinghouse Power Corporation (SWPC) have been focused on the development and demonstration of hot gas filter systems as an enabling technology for power generation. As part of the demonstration effort, SWPC has been actively involved in the development of advanced filter materials and component configuration, has participated in numerous surveillance programs characterizing the material properties and microstructure of field-tested filter elements, and has undertaken extended, accelerated filter life testing programs. This report reviews SWPC's material and component assessment efforts, identifying the performance, stability, and life of porous commercial metal, advanced alloy, and intermetallic filters under simulated, pressurized fluidized-bed combustion (PFBC) conditions.

  9. Development of NDE methods for hot gas filters.

    SciTech Connect (OSTI)

    Deemer, C.; Ellingson, W. A.; Koehl, E. R.; Lee, H.; Spohnholtz, T.; Sun, J. G.

    1999-07-21T23:59:59.000Z

    Ceramic hot gas candle filters are currently under development for hot gas particulate cleanup in advanced coal-based power systems. The ceramic materials for these filters include nonoxide monolithic, nonoxide-fiber-reinforced composites, and nonoxide reticulated foam. A concern is the lack of reliable data on which to base decisions for reusing or replacing hot gas filters during plant shutdowns. The work in this project is aimed at developing nondestructive evaluation (FIDE) technology to allow detection, and determination of extent, of life-limiting characteristics such as thermal fatigue, oxidation, damage from ash bridging such as localized cracking, damage from local burning, and elongation at elevated temperature. Although in-situ NDE methods are desirable in order to avoid disassembly of the candle filter vessels, the current vessel designs, the presence of filter cakes and possible ash bridging, and the state of NDE technology prevent this. Candle filter producers use a variety of NDE methods to ensure as-produced quality. While impact acoustic resonance offers initial promise for examining new as-produced filters and for detecting damage in some monolithic filters when removed from service, it presents difficulties in data interpretation, it lacks localization capability, and its applicability to composites has yet to be demonstrated. Additional NDE technologies being developed and evaluated in this program and whose applicability to both monolithics and composites has been demonstrated include (a) full-scale thermal imaging for analyzing thermal property variations; (b) fret, high-spatial-resolution X-ray imaging for detecting density variations and dimensional changes; (c) air-coupled ultrasonic methods for determining through-thickness compositional variations; and (d) acoustic emission technology with mechanical loading for detecting localized bulk damage. New and exposed clay-bonded SiC filters and CVI-SiC composite filters have been tested with these additional NDE methods.

  10. New Techniques to Characterize and Remove Water-Based Drilling Fluids Filter Cake

    E-Print Network [OSTI]

    Elkatatny, Salaheldin Mahmoud

    2013-03-29T23:59:59.000Z

    Filter cake characterization is very important in drilling and completion operations. Heterogeneity of the filter cake plays a key role in the design of chemical treatments needed to remove the filter cake. The objectives of this study...

  11. Design of fuel efficient brick kiln for ceramic water filter firing in Ghana

    E-Print Network [OSTI]

    Adjorlolo, Eric (Eric James Kofi)

    2007-01-01T23:59:59.000Z

    Ceramic water filters are currently produced in Ghana in order to provide a household solution to contaminated water. These filters, locally branded with the name Kosim filter by originating from Potters for Peace-Nicaragua, ...

  12. TESTING OF THE SECOND GENERATION SPINTEK ROTARY FILTER -11357

    SciTech Connect (OSTI)

    Herman, D.; Poirier, M.; Fowley, M.; Keefer, M.; Huff, T.

    2011-02-02T23:59:59.000Z

    The SpinTek rotary microfilter has been developed under the Department of Energy (DOE) Office of Environmental Management (EM) for the purpose of deployment in radioactive service in the DOE complex. The unit that was fabricated and tested is the second generation of the filter that incorporates recommended improvements from previous testing. The completion of this test satisfied a key milestone for the EM technology development program and technology readiness for deployment by Savannah River Remediation in the Small Column Ion Exchange and Sludge Washing processes at the Savannah River Site (SRS). The Savannah River National Laboratory (SRNL) contracted SpinTek Filtration to fabricate a full scale 25 disk rotary filter and perform a 1000 hour endurance test with a simulated SRS sludge. Over 1500 hours of operation have been completed with the filter. SpinTek Filtration fabricated a prototypic 25 disk rotary filter including updates to manufacturing tolerances, an updated design to the rotary joint, improved cooling to the bottom journal, decreases in disk and filter shaft hydraulic resistances. The filter disks were fabricated with 0.5 {micro} pore size, sintered-metal filter media manufactured by Pall Corporation (M050). After fabrication was complete, the filter passed acceptance tests demonstrating rejection of solids and clean water flux with a 50% improvement over the previous filters. Once the acceptance test was complete, a 1000 hour endurance test was initiated simulating a sludge washing process. The test used a simulated SRS Sludge Batch 6 recipe. The insoluble solids started at 5 wt% and were raised to 10 and 15 wt% insoluble solids to simulate the concentration of a large volume tank. The filter system was automated and set up for 24 hour unattended operation. To facilitate this, process control logic was written to operate the filter. During the development it was demonstrated that the method of starting and stopping the filter can affect the build up of filter cake on the disks and therefore the performance of the filter. The filter performed well with the simulant. Very little drop in production was noticed between the 5 and 10 wt% insoluble solids feed. Increasing to 15 wt% had a more pronounced impact due to the rheology of the feed. Acid cleaning was used to clean the filter disks in-situ and restore filtration rate to almost 90% of the initial clean disk rate. Eighty liters of 0.2 M nitric acid in conjunction with water rinses were used to clean the filter in less than 2 hours. Filter testing was completed after 1000 hours of operation were performed on the final filter assembly configuration. The total run time for the testing was over 1500 hours. At the end of the test, the sludge washing was performed successfully from approximately 5.6 M to less than 1 M sodium.

  13. Top U.S. Nuclear Official Commends Industry for Submitting 3rd...

    Office of Environmental Management (EM)

    submitted to the NRC, this marks the third complete COL application to build a new nuclear reactor in just three months. "As the third complete license application for a new...

  14. Two Essays on Problems of Deregulated Electricity Markets A DISSERTATION SUBMITTED TO

    E-Print Network [OSTI]

    Two Essays on Problems of Deregulated Electricity Markets A DISSERTATION SUBMITTED TO THE TEPPER ELECTRICITY MARKETS...................I ACKNOWLEDGEMENTS'S ELECTRICITY MARKET IN 2000...........................1-1 1.1 INTRODUCTION

  15. Radiation Exposure Monitoring Systems Program Policy for Submitting of PII information

    Broader source: Energy.gov [DOE]

    The REMS Program Policy for submitting of PII information in accordance with the Office of Environment, Health, Safety and Security (EHSS) under DOE Order 231.1B and the REMS Reporting Guide.

  16. Safety Shoe and Insole Reimbursement Form Requisitioner: -Submit to supervisor for signature

    E-Print Network [OSTI]

    Sinnamon, Gordon J.

    Safety Shoe and Insole Reimbursement Form Requisitioner: - Submit to supervisor for signature. _________________________________________________ POSITION ____________________________________________________________________ DID YOU PURCHASE SAFETY TOES Safety Shoes or other footwear under the provisions outlined in the Collective Agreement

  17. Academic Advisor Appeal Questionnaire To be submitted as part of Financial Aid Appeal Process

    E-Print Network [OSTI]

    Academic Advisor Appeal Questionnaire To be submitted as part of Financial Aid Appeal Process: ________________________________________ THE FOLLOWING IS TO BE COMPLETED BY THE ACADEMIC ADVISOR PRIOR TO FINANCIAL AID APPEAL MEETING Advisor Name: __________________________________ Department: __________________________________ Advisor Telephone: ______________________________ Advisor E

  18. Solution to Submit Large Electronic Proposal Files Principal Investigator and Departmental Staff Procedures

    E-Print Network [OSTI]

    Janssen, Michel

    Procedures Sponsored Projects Administration (SPA) now has a solution for large electronic proposal files Submission folder. They can only upload files. 9. Follow the normal procedures to advise SPA to submit the sponsor's procedures. #12;

  19. PREPRINT submitted to Journal of Physics B Electronic structure of the Magnesium hydride

    E-Print Network [OSTI]

    Recanati, Catherine

    PREPRINT submitted to Journal of Physics B Electronic structure of the Magnesium hydride molecular: 31.15.AR,31.15.Ct,31.50.Be,31.50.Df #12; Electronic structure of the Magnesium hydride molecular ion

  20. Seismic fragility curves for reinforced concrete A Dissertation Submitted in Partial Fulfilment of the Requirements

    E-Print Network [OSTI]

    Seismic fragility curves for reinforced concrete buildings A Dissertation Submitted in Partial dissertation entitled "Seismic fragility curves for reinforced concrete frame and wall- frame buildings. Buildings designed for seismic loading, and buildings designed only for gravity loads, are considered

  1. Submitted to SIGGRAPH 2001 Filling holes in complex surfaces using volumetric diffusion

    E-Print Network [OSTI]

    Stanford University

    plausible, visually pleasing geometry, distinguish in the output model betSubmitted to SIGGRAPH 2001 Filling holes in complex surfaces using volumetric diffusion Steve Marschner James Davis Matt Garr Marc Levoy Stanford University Abstract We address the problem of building

  2. POLICY CHECKLIST To be submitted with the policy as presented at Cabinet

    E-Print Network [OSTI]

    Khan, Javed I.

    POLICY CHECKLIST To be submitted with the policy as presented at Cabinet Initiating party: ______________________________________ Date: _______________ (person who initiated the policy change, project leader) Originating Department/Office: ________________________________________________ Policy name: ______________________________________________________________ New Policy: _____ Amended

  3. CHEMICAL TRACER RETENTION IN POROUS MEDIA Submitted to the Department of Petroleum Engineering

    E-Print Network [OSTI]

    Stanford University

    * CHEMICAL TRACER RETENTION IN POROUS MEDIA A Report Submitted to the Department of Petroleum Engineering of Stanford University in Fulfillment of the Requirement for the Degree of Master of Science

  4. Moving granular-bed filter development program. Topical report

    SciTech Connect (OSTI)

    Newby, R.A.; Yang, W.C.; Smeltzer, E.E.; Lippert, T.E.

    1994-04-01T23:59:59.000Z

    Advanced, coal-based, power plants, such as IGCC and Advanced-PFBC, are currently nearing commercial demonstration. These power plant technologies require hot gas filtration as part of their gas cleaning trains. Ceramic barrier filters are the major filter candidates being developed for these hot gas cleaning applications. While ceramic barrier filters achieve high levels of particle removal, concerns exist for their reliability and operability in these applications. An alternative hot gas filtration technology is the moving granular bed filter. An advanced, moving granular bed filter has been conceived, and early development activities performed by the Westinghouse Electric Corporation, Science and Technology Center. This document reports on the Base Contract tasks performed to resolve the barrier technical issues for this technology. The concept, the Standleg Moving Granular Bed Filter (SMGBF) has a concurrent downward, gas and bed media flow configuration that results in simplified features and improved scaleup feasibility compared to alternative designs. Two modes of bed media operation were assessed in the program: once-through using pelletized power plant waste as bed media, and recycle of bed media via standleg and pneumatic transport techniques. Cold Model testing; high-temperature, high-pressure testing; and pelletization testing using advanced power plant wastes, have been conducted in the program. A commercial, economic assessment of the SMGBF technology was performed for IGCC and Advanced-PFBC applications. The evaluation shows that the barrier technical issues can be resolved, and that the technology is potentially competitive with ceramic barrier filters.

  5. Novel oxide-oxide fiber reinforced hot gas filter development

    SciTech Connect (OSTI)

    Wagner, R.A.

    1995-12-01T23:59:59.000Z

    The objective of this program is to fabricate and test oxide fiber reinforced composite hot gas filter elements for advanced power generation systems. The level of mechanical durability exhibited by the currently available filters in field tests indicates that more rugged filters are required to meet the demands of large power generation systems. Furthermore, long term corrosion resistance of currently available filters has yet to be demonstrated in PFBC systems. The essential requirements of a composite material designed to meet the program objective for a toughened hot gas filter include the following: Stable continuous fiber; rigid porous matrix; engineered fiber-matrix interface; and cost effectiveness. Based on properties, availability, and cost, Mitsui`s ALMAX alumina fiber and 3M`s NEXTEL 610 alumina fiber were selected as the oxide reinforcement fibers. In order to meet the economic goals of the program it is essential that the cost and amount of continuous fiber be minimized. A four axis filament winder will be used to fabricate filter Preforms in a variety of fiber architectures. Carbon was used as the initial fiber coating because it was known to be resistant to the Processing chemicals. The coating was produced by pyrolysis of the resin based sizings on the continuous fibers. The matrix of the composite filter is comprised of chopped ceramic fiber. Saffil fiber was used for all compositions in this program.

  6. Optical add/drop filter for wavelength division multiplexed systems

    DOE Patents [OSTI]

    Deri, Robert J. (Pleasanton, CA); Strand, Oliver T. (Castro Valley, CA); Garrett, Henry E. (Livermore, CA)

    2002-01-01T23:59:59.000Z

    An optical add/drop filter for wavelength division multiplexed systems and construction methods are disclosed. The add/drop filter includes a first ferrule having a first pre-formed opening for receiving a first optical fiber; an interference filter oriented to pass a first set of wavelengths along the first optical fiber and reflect a second set of wavelengths; and, a second ferrule having a second pre-formed opening for receiving the second optical fiber, and the reflected second set of wavelengths. A method for constructing the optical add/drop filter consists of the steps of forming a first set of openings in a first ferrule; inserting a first set of optical fibers into the first set of openings; forming a first set of guide pin openings in the first ferrule; dividing the first ferrule into a first ferrule portion and a second ferrule portion; forming an interference filter on the first ferrule portion; inserting guide pins through the first set of guide pin openings in the first ferrule portion and second ferrule portion to passively align the first set of optical fibers; removing material such that light reflected from the interference filter from the first set of optical fibers is accessible; forming a second set of openings in a second ferrule; inserting a second set of optical fibers into the second set of openings; and positioning the second ferrule with respect to the first ferrule such that the second set of optical fibers receive the light reflected from the interference filter.

  7. Moving granular-bed filter development program topical report

    SciTech Connect (OSTI)

    Newby, R.A.; Dilmore, W.J.; Fellers, A.W.; Gasparovic, A.C.; Kittle, W.F.; Lippert, T.E.; Smeltzer, E.E.; Yang, W.C.

    1991-10-17T23:59:59.000Z

    The Westinghouse Science Technology Center has proposed a novel moving granular-bed filter concept, the Standleg Moving Granular-Bed Filter (S-MGBF) system, that overcomes the inherent deficiencies of the current state-of-the-art moving granular-bed filter technology. The S-MGBF system combines two unique features that make it highly effective for use in advanced coal-fueled power plants. First, the S-MGBF system applies pelletization technology to generate filter pellets from the power plant solid waste materials, and uses these pellets as a once-through'' filtering media to eliminate the need for costly, complex, and large filter media recycling equipment. This pelletizing step also generates a more environmentally acceptable solid waste product and provides the potential to incorporate gas-phase contaminant sorbents into the filtering media. Secondly, the S-MGBF system passes these pellets and the flyash laden power plant gas through a highly compact S-MGBF that uses cocurrent gas-pellet contacting in an arrangement that greatly simplifies and enhances the distribution of dirty gas to the moving bed and the disengagement of clean gas from the moving bed.

  8. E-Print Network 3.0 - adaptive filtering techniques Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    adaptive filtering techniques Page: << < 1 2 3 4 5 > >> 1 Applications of the Fourier Transform in Imaging Highpass and Lowpass Filters Summary: in the frequency domain. We present...

  9. E-Print Network 3.0 - air filters Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: , water treatment equipment, elevators (electric and hydraulic), sewer lift pumps, filter servicing in air... lift pumps, filter servicing in air-handling units and...

  10. Analog FIR Filter Used for Range-Optimal Pulsed Radar Applications

    E-Print Network [OSTI]

    Su, Eric Chen

    2014-08-13T23:59:59.000Z

    .......................................................................................................... 1 1.1. Radar system ...................................................................................................... 2 1.2 Matched filter ...................................................................................................... 4... 1.3 Analog FIR matched filters ................................................................................. 4 1.4 Thesis organization ............................................................................................. 6 2...

  11. E-Print Network 3.0 - automatic wedge filter Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    activates... a filter, items that do not match the filter are ... Source: Horvitz, Eric - Adaptive Systems and Interaction Group, Microsoft Research Collection: Computer...

  12. Mechanical analysis of a cross flow filter. Final report, January 31, 1995

    SciTech Connect (OSTI)

    NONE

    1998-12-31T23:59:59.000Z

    A cross flow filter for particulate control is described. Objectives were to improve the reliability and mechanical integrity of the filter.

  13. Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations 2005 Diesel Engine Emissions Reduction (DEER)...

  14. E-Print Network 3.0 - active filter utilizing Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TRANSACTIONS ON POWER ELECTRONICS, VOL. 17, NO. 1, JANUARY 2002 A New Hybrid Active Power Filter (APF) Topology Summary: active power filter topology. The function of the IGBT...

  15. Adjunctive Inferior Vena Cava Filter Placement for Acute Pulmonary Embolism

    SciTech Connect (OSTI)

    Jha, V. M., E-mail: vjha@mfa.gwu.ed [George Washington University Medical Center, Division of Pulmonary and Critical Care Medicine, Department of Medicine (United States); Lee-Llacer, J. [George Washington University Medical Center, Department of Anesthesiology and Critical Care Medicine (United States); Williams, J.; Ubaissi, H.; Gutierrez, G. [George Washington University Medical Center, Division of Pulmonary and Critical Care Medicine, Department of Medicine (United States)

    2010-08-15T23:59:59.000Z

    Inferior vena cava (IVC) filters are sometimes placed as an adjunct to full anticoagulation in patients with significant pulmonary embolism (PE). We aimed to determine the prevalence of adjunctive IVC filter placement in individuals diagnosed with PE, as well as the effect of adjunctive filter placement on mortality in patients with right heart strain associated with PE. This was a retrospective study of patients with acute PE treated with full anticoagulation admitted to a single academic medical center. Information abstracted from patient charts included presence or absence of right heart strain and of deep-vein thrombosis, and whether or not an IVC filter was placed. The endpoint was in-hospital mortality. Over 2.75 years, we found that 248 patients were diagnosed with acute PE, with an in-hospital mortality rate of 4.4%. The prevalence of adjunctive IVC filter placement was 13.3% (33 of 248), and the prevalence of documented right heart strain was 27.0% (67 of 248). In-hospital mortality was 10.2% in the non-filter-treated group (5 of 49), whereas there were no deaths in the filter-treated group (0 of 18); however, the difference was not statistically significant (P = 0.37). Both the presence of deep-vein thrombosis and of right heart strain increased the likelihood that an adjunctive IVC filter was placed (P < 0.0001 and P < 0.001, respectively). At our institution, patients were treated with IVC filters in addition to anticoagulation in 13.3% of cases of acute PE. Prospective studies or large clinical registries should be conducted to clarify whether this practice improves outcomes.

  16. Mechanically and optically controlled graphene valley filter

    SciTech Connect (OSTI)

    Qi, Fenghua; Jin, Guojun, E-mail: gjin@nju.edu.cn [National Laboratory of Solid State Microstructures and Department of Physics, Nanjing University, Nanjing 210093 (China)

    2014-05-07T23:59:59.000Z

    We theoretically investigate the valley-dependent electronic transport through a graphene monolayer modulated simultaneously by a uniform uniaxial strain and linearly polarized light. Within the Floquet formalism, we calculate the transmission probabilities and conductances of the two valleys. It is found that valley polarization can appear only if the two modulations coexist. Under a proper stretching of the sample, the ratio of the light intensity and the light frequency squared is important. If this quantity is small, the electron transport is mainly contributed by the valley-symmetric central band and the conductance is valley unpolarized; but when this quantity is large, the valley-asymmetric sidebands also take part in the transport and the valley polarization of the conductance appears. Furthermore, the degree of the polarization can be tuned by the strain strength, light intensity, and light frequency. It is proposed that the detection of the valley polarization can be realized utilizing the valley beam splitting. Thus, a graphene monolayer can be used as a mechanically and optically controlled valley filter.

  17. Westinghouse hot gas particle filter system

    SciTech Connect (OSTI)

    Lippert, T.E.; Bruck, G.J.; Newby, R.A.; Bachovchin, D.M. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center; Debski, V.L.; Morehead, H.T. [Westinghouse Electric Corp., Orlando, FL (United States). Power Generation Business Unit

    1997-12-31T23:59:59.000Z

    Integrated Gasification Combined Cycles (IGCC) and Pressurized Circulating Fluidized Bed Cycles (PCFB) are being developed and demonstrated for commercial power generation applications. Hot gas particulate filters (HGPF) are key components for the successful implementation of IGCC and PCFB in power generation gas turbine cycles. The objective is to develop and qualify through analysis and testing a practical HGPF system that meets the performance and operational requirements of PCFB and IGCC systems. This paper reports on the status of Westinghouse`s HGPF commercialization programs including: A quick summary of past gasification based HGPF test programs; A summary of the integrated HGPF operation at the American Electric Power, Tidd Pressurized Fluidized Bed Combustion (PFBC) Demonstration Project with approximately 6000 hours of HGPF testing completed; A summary of approximately 3200 hours of HGPF testing at the Foster Wheeler (FW) 10 MW{sub e} facility located in Karhula, Finland; A summary of over 700 hours of HGPF operation at the FW 2 MW{sub e} topping PCFB facility located in Livingston, New Jersey; A summary of the design of the HGPFs for the DOE/Southern Company Services, Power System Development Facility (PSDF) located in Wilsonville, Alabama; A summary of the design of the commercial-scale HGPF system for the Sierra Pacific, Pinon Pine IGCC Project; A review of completed testing and a summary of planned testing of Westinghouse HGPFs in Biomass IGCC applications; and A brief summary of the HGPF systems for the City of Lakeland, McIntosh Unit 4 PCFB Demonstration Project.

  18. Hot gas particle filter systems: Commercialization status

    SciTech Connect (OSTI)

    Morehead, H.T.; Adams, V.L. [Westinghouse Electric Corp., Orlando, FL (United States). Power Generation Business Unit; Yang, W.C.; Lippert, T.E. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center

    1997-12-31T23:59:59.000Z

    Integrated Gasification Combined Cycles (IGCCs) and Pressurized Circulating Fluidized Bed Cycles (PCFBs) are being developed and demonstrated for commercial power generation applications. Hot gas particulate filters (HGPFs) are key components for the successful implementation of advanced IGCC and PCFB power generation cycles. The objective is to develop and qualify through analysis and testing a practical HGPF system that meets the performance and operational requirements of PCFB and IGCC systems. This paper reports on the status of Westinghouse`s HGPF commercialization programs including: A quick summary of past gasification based HGPF test programs; A summary of the integrated HGPF operation at the American Electric Power, Tidd Pressurized Fluidized Bed Combustion (PFBC) Demonstration Project with approximately 6,000 hours of HGPF testing completed; A summary of approximately 3,200 hours of HGPF testing at the Foster Wheeler (FW) 10 MWe PCFB facility located in Karhula, Finland; A summary of over 700 hours of HGPF operation at the FW 2 MWe topping PCFB facility located in Livingston, New Jersey; A summary of the design of the HGPFs for the DOE/Southern Company Services, Power System Development Facility (PSDF) located in Wilsonville, Alabama; A summary of the design of the commercial-scale HGPF system for the Sierra Pacific, Pinon Pine IGCC Project; A review of completed testing and a summary of planned testing of Westinghouse HGPFs in Biomass IGCC applications; and A brief summary of the HGPF systems for the City of Lakeland, McIntosh Unit 4 PCFB Demonstration Project.

  19. Standleg Moving Granular Bed Filter development program

    SciTech Connect (OSTI)

    Newby, R.A.; Yang, W.C.; Smeltzer, E.E.

    1992-11-01T23:59:59.000Z

    The design, fabrication, and installation of the cold flow test facility has been completed. The SMGBF test facility shown in Figure 2 consists of a solids feed hopper, a transparent test vessel, a screw conveyor, a 55-gal drum for solids storage, a dust feeder, a baghouse filter, and the associated instrumentation for flow and pressure control and measurement. The standleg is 11-in ID by 3-ft long, and also transparent to facilitate observation. The crushed acrylic particles of characteristics shown in Table 1 are used as the bed media. The bed particles were selected, by maintaining the particle size while reducing the particle density, to simulate the minimum fluidization velocity expected under high-temperature, high-pressure conditions. By maintaining the particle size, the bed effectively simulates the bed packing and voidage in the moving bed which is directly related to the efficiency of particulate removal and pressure drop characteristics. The test facility performed as designed and no particular difficulties were encountered. The baseline data on pressure profiles across the stationary and the moving granular beds were obtained for gas face velocities up to 6 ft/s, higher than the minimum fluidization velocity of the bed material (5 ft/s), and no visible fluidization was observed at the base of the standleg. This confirms the operational feasibility of the compact SMGBF design.

  20. Standleg Moving Granular Bed Filter development program

    SciTech Connect (OSTI)

    Newby, R.A.; Yang, W.C.; Smeltzer, E.E.

    1992-01-01T23:59:59.000Z

    The design, fabrication, and installation of the cold flow test facility has been completed. The SMGBF test facility shown in Figure 2 consists of a solids feed hopper, a transparent test vessel, a screw conveyor, a 55-gal drum for solids storage, a dust feeder, a baghouse filter, and the associated instrumentation for flow and pressure control and measurement. The standleg is 11-in ID by 3-ft long, and also transparent to facilitate observation. The crushed acrylic particles of characteristics shown in Table 1 are used as the bed media. The bed particles were selected, by maintaining the particle size while reducing the particle density, to simulate the minimum fluidization velocity expected under high-temperature, high-pressure conditions. By maintaining the particle size, the bed effectively simulates the bed packing and voidage in the moving bed which is directly related to the efficiency of particulate removal and pressure drop characteristics. The test facility performed as designed and no particular difficulties were encountered. The baseline data on pressure profiles across the stationary and the moving granular beds were obtained for gas face velocities up to 6 ft/s, higher than the minimum fluidization velocity of the bed material (5 ft/s), and no visible fluidization was observed at the base of the standleg. This confirms the operational feasibility of the compact SMGBF design.

  1. Direct Assay of Filter Media following DEOX Testing

    SciTech Connect (OSTI)

    R.P. Lind; J.J. Giglio; D.G. Cummings; M.W. Huntley; C.D. Morgan; K.J. Bateman; D.L. Wahlquist; D.A. Sell

    2007-09-01T23:59:59.000Z

    The direct assay of filter media by gamma spectrometry following DEOX testing has distinct advantages over analytical chemistry. Prior to using gamma spectrometry for the quantification of cesium (Cs-137), a calibration must be established with known sources since gamma spectrometry yields relative results. Quantitative analytical chemistry, in particular ICP-MS, has been performed on the filter media for comparison to the gamma spectrometry data. The correlation of gamma spectrometry to ICP-MS data is presented to justify the continued use of gamma spectrometry for filter media.

  2. Direct assay of filter media following DEOX testing

    SciTech Connect (OSTI)

    Westphal, B.R.; Lind, R.P.; Giglio, J.J.; Cummings, D.G.; Huntley, M.W.; Morgan, C.D.; Bateman, K.J.; Wahlquist, D.L.; Sell, D.A. [Idaho National Laboratory: P.O. Box 1625, Idaho Falls, ID, 83415 (United States)

    2007-07-01T23:59:59.000Z

    The direct assay of filter media by gamma spectrometry following DEOX testing has distinct advantages over analytical chemistry. Prior to using gamma spectrometry for the quantification of cesium (Cs- 137), a calibration must be established with known sources since gamma spectrometry yields relative results. Quantitative analytical chemistry, in particular ICP-MS, has been performed on the filter media for comparison to the gamma spectrometry data. The correlation of gamma spectrometry to ICP-MS data is presented to justify the continued use of gamma spectrometry for filter media. (authors)

  3. Elevated exhaust temperature, zoned, electrically-heated particulate matter filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Bhatia, Garima [Bangalore, IN

    2012-04-17T23:59:59.000Z

    A system includes an electrical heater and a particulate matter (PM) filter that is arranged one of adjacent to and in contact with the electrical heater. A control module selectively increases an exhaust gas temperature of an engine to a first temperature and that initiates regeneration of the PM filter using the electrical heater while the exhaust gas temperature is above the first temperature. The first temperature is greater than a maximum exhaust gas temperature at the PM filter during non-regeneration operation and is less than an oxidation temperature of the PM.

  4. In Vivo Evaluation of a Retrievable Vena Cava Filter-The Dibie-Musset Filter: Experimental Results

    SciTech Connect (OSTI)

    Dibie, Alain [Departement Cardio-Vasculaire, Institut Mutualiste Montsouris, Choisy 6, Place de Port au Prince, F-75013 Paris (France); Musset, Dominique [Service de Cardiologie, Hopital Antoine Beclere, 158, rue de la Porte de Trivaux, F-92200 Clamart (France); Heissler, Marc [Departement Cardio-Vasculaire, Institut Mutualiste Montsouris, Choisy 6, Place de Port au Prince, F-75013 Paris (France); Fournet, Jean-Christophe [Service d'Anatomie et de Cytologie Pathologiques, Hopital Necker, 159 rue de Sevres, F-75015 Paris (France); Palau, Robert; Laborde, Francois [Departement Cardio-Vasculaire, Institut Mutualiste Montsouris, Choisy 6, Place de Port au Prince, F-75013 Paris (France)

    1998-03-15T23:59:59.000Z

    Purpose: To evaluate, in an animal model, the efficacy and safety of a 7 Fr percutaneous vena cava filter for temporary or permanent use. Methods: The Dibie-Musset (DM) filter is a wire preformed into a double-spiral shape with a spring effect. The experiment was performed in 15 adult sheep and consisted of the insertion of 45 filters, clot trapping tests, and filter retrieval. Follow-up in all sheep consisted of radiologic (abdominal radiograph, inferior vena cavogram, abdominal computed tomography), macroscopic, and microscopic examinations between days 8 and 386 after filter placement. Results: Of the 45 filters implanted in 15 sheep, 29 were retrieved between day 0 and day 15. Filtration efficiency was 100% for clots 4 x 4 x 20 mm. No long-term (1 year) side-effects were detectable. Microscopic examination of the vein wall showed only a dense intimal fibrosis without signs of acute inflammation at 1 year. Conclusion: These results support the efficiency and safety of the DM filter in an animal model.

  5. Preparing to Submit a License Application for Yucca Mountain

    SciTech Connect (OSTI)

    W.J. Arthur; M.D. Voegele

    2005-03-14T23:59:59.000Z

    In 1982, the U.S. Congress passed the Nuclear Waste Policy Act, a Federal law that established U.S. policy for the permanent disposal of spent nuclear fuel and high-level radioactive waste. Congress amended the Act in 1987, directing the Department of Energy to study only Yucca Mountain, Nevada as the site for a permanent geologic repository. As the law mandated, the Department evaluated Yucca Mountain to determine its suitability as the site for a permanent geologic repository. Decades of scientific studies demonstrated that Yucca Mountain would protect workers, the public, and the environment during the time that a repository would be operating and for tens of thousands of years after closure of the repository. A repository at this remote site would also: preserve the quality of the environment; allow the environmental cleanup of Cold War weapons facilities; provide the nation with additional protection from acts of terrorism; and support a sound energy policy. Throughout the scientific evaluation of Yucca Mountain, there has been no evidence to disqualify Yucca Mountain as a suitable site for the permanent disposal of spent nuclear fuel and high-level radioactive waste. Upon completion of site characterization, the Secretary of Energy considered the results and concluded that a repository at Yucca Mountain would perform in a manner that protects public health and safety. The Secretary recommended the site to the President in February 2002; the President agreed and recommended to Congress that the site be approved. The Governor of Nevada submitted a notice of disapproval, and both houses of Congress acted to override the disapproval. In July 2002, the President's approval allowed the Department to begin the process of submittal of a license application for Yucca Mountain as the site for the nation's first repository for spent nuclear fuel and high-level radioactive waste. Yucca Mountain is located on federal land in Nye County in southern Nevada, an arid region of the United States, approximately 100 miles (160 kilometers) northwest of Las Vegas (Figure 1). The location is remote from population centers, and there are no permanent residents within approximately 14 miles (23 km) of the site. Overall, Nye County has a population density of about two persons per square mile (two persons per 2.5 square km); in the vicinity of Yucca Mountain, it is significantly less. Yucca Mountain is a series of north-south-trending ridges extending approximately 25 miles (40 km), and consists of successive layers of fine-grained volcanic tuffs, millions of years old, underlain by older carbonate rocks. The alternating layers of welded and nonwelded volcanic tuffs have differing hydrologic properties that significantly impact the manner in which water moves through the mountain. The repository horizon will be in welded tuff located in the unsaturated zone, more than 1,000 feet (300 meters) above the water table in the present-day climate, and is expected to remain well above the water table during wetter future climate conditions. Future meteorology and climatology at Yucca Mountain are important elements in understanding the amount of water available to potentially interact with the waste.

  6. STABLE FILTERING SCHEMES WITH RATIONAL DILATIONS BRODY DYLAN JOHNSON

    E-Print Network [OSTI]

    Johnson, Brody Dylan

    STABLE FILTERING SCHEMES WITH RATIONAL DILATIONS BRODY DYLAN JOHNSON Abstract. The relationship Services Administration at St. Louis University. 1 #12;2 BRODY DYLAN JOHNSON If is a scaling function

  7. Low Power Filtering Techniques for Wideband and Wireless Applications

    E-Print Network [OSTI]

    Gambhir, Manisha

    2010-10-12T23:59:59.000Z

    This dissertation presents design and implementation of continuous time analog filters for two specific applications: wideband analog systems such as disk drive channel and low-power wireless applications. Specific focus has been techniques...

  8. Nonlinear bayesian filtering with applications to estimation and navigation

    E-Print Network [OSTI]

    Lee, Deok-Jin

    2005-08-29T23:59:59.000Z

    In principle, general approaches to optimal nonlinear filtering can be described in a unified way from the recursive Bayesian approach. The central idea to this recur- sive Bayesian estimation is to determine the probability density function...

  9. Tribological performance of hybrid filtered arc-magnetron coatings...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PE Gannon, D VanVorous, AA Voevodin, A Rutkowski, C Muratore, RJ Smith, AN Kayani, DS Gelles, V Shutthanandan, and BG Trusov.2006."Tribological performance of hybrid filtered...

  10. Evaluation of Alternative Filter Media for the Rotary Microfilter

    SciTech Connect (OSTI)

    Poirier, M. [Savannah River National Laboratory, Environmental and Chemical Process Technology; Herman, [Savannah River National Laboratory, Environmental and Chemical Process Technology; Bhave, Ramesh R [ORNL

    2012-01-01T23:59:59.000Z

    M. R. Poirier , D. T. Herman & R. Bhave (2012) Evaluation of Alternative Filter Media for the Rotary Microfilter, Separation Science and Technology, 47:14-15, 2108-2114

  11. Rational Minimax Filtering Arthur J. Krener Wei Kang

    E-Print Network [OSTI]

    Sontag, Eduardo

    the measurements y(t) = Cx(t) y(t) = CAx(t) ¨y(t) = CA2 x(t) ... #12;Kalman Filtering If the matrix C CA CA2

  12. Engine Tests of an Active PM Filter Regeneration System

    Broader source: Energy.gov (indexed) [DOE]

    HERE (tm) 10 Diesel Particulate Filter Flow Direction 10 Liter, Non-catalyzed, Silicon Carbide CLEAN AIR STARTS HERE (tm) 11 XFC(tm) Engine Testing: No DPF installed Device out...

  13. Adaptive enhancement of magnetoencephalographic signals via multichannel filtering

    SciTech Connect (OSTI)

    Lewis, P.S.

    1989-01-01T23:59:59.000Z

    A time-varying spatial/temporal filter for enhancing multichannel magnetoencephalographic (MEG) recordings of evoked responses is described. This filter is based in projections derived from a combination of measured data and a priori models of the expected response. It produces estimates of the evoked fields in single trial measurements. These estimates can reduce the need for signal averaging in some situations. The filter uses the a priori model information to enhance responses where they exist, but avoids creating responses that do not exist. Examples are included of the filter's application to both MEG single trial data containing an auditory evoked field and control data with no evoked field. 5 refs., 7 figs.

  14. Spacetime Kalman filter Noel Cressie & Christopher K. Wikle

    E-Print Network [OSTI]

    Space­time Kalman filter Noel Cressie & Christopher K. Wikle Volume 4, pp 2045­2049 in Encyclopedia], Meiring et al. [17], and Wikle and Cressie [22]. A General Space­Time Dynamical Model Before presenting

  15. An improved method for weighted least squares IIR filter design

    E-Print Network [OSTI]

    Davila-Pazmino, Javier

    1999-01-01T23:59:59.000Z

    Recently, a new method for IIR weighted least squares filter design has been proposed. In this method, the problem of approximating a desired frequency response using a rational function is solved using an iterative approach. After studying...

  16. Are Ventilation Filters Degrading Indoor Air Quality in California Classrooms?

    SciTech Connect (OSTI)

    Fisk, William J.; Destaillats, H.; Apte, M.G.; Destaillats,, Hugo; Fisk, Michael G. Apte and William J.

    2008-10-01T23:59:59.000Z

    Heating, ventilating, and cooling classrooms in California consume substantial electrical energy. Indoor air quality (IAQ) in classrooms affects studenthealth and performance. In addition to airborne pollutants that are emitted directly by indoor sources and those generated outdoors, secondary pollutants can be formed indoors by chemical reaction of ozone with other chemicals and materials. Filters are used in nearly all classroom heating, ventilation and air?conditioning (HVAC) systems to maintain energy-efficient HVAC performance and improve indoor air quality; however, recent evidence indicates that ozone reactions with filters may, in fact, be a source of secondary pollutants. This project quantitatively evaluated ozone deposition in HVAC filters and byproduct formation, and provided a preliminary assessment of the extent towhich filter systems are degrading indoor air quality. The preliminary information obtained will contribute to the design of subsequent research efforts and the identification of energy efficient solutions that improve indoor air quality in classrooms and the health and performance of students.

  17. Radio Frequency Diesel Particulate Filter Sensor Reduces Fuel...

    Office of Environmental Management (EM)

    this process, known as regeneration, to only occur when needed, thereby reducing fuel consumption and enabling longer filter life. The RF-DPF can be used with light- and...

  18. California Energy Standards Recognize the Importance of Filter...

    Energy Savers [EERE]

    filter sizing is an issue that applies to all new and existing homes that use ducted HVAC systems-about 68% of existing U.S. homes and most of the homes currently under...

  19. California ARB Verification Testing of the CBSTM Soot Filter...

    Broader source: Energy.gov (indexed) [DOE]

    Soot Filter for Diesel Locomotiive Applications Retrofit and Testing of a Pre-Turbo, Diesel Oxidation Catalyst on a Tier 0, SD60M Freight Locomotive Achieving Over 50% PM...

  20. Chip-Scale Quadrupole Mass Filters for Portable Mass Spectrometry

    E-Print Network [OSTI]

    Cheung, Kerry

    We report the design, fabrication, and characterization of a new class of chip-scale quadrupole mass filter (QMF). The devices are completely batch fabricated using a wafer-scale process that integrates the quadrupole ...

  1. SCALE-CORRECTED ENSEMBLE KALMAN FILTER FOR OBSERVATIONS OF PRODUCTION

    E-Print Network [OSTI]

    Eidsvik, Jo

    to introduce bias in production forecasts. The Scale-Corrected Ensemble Kalman Filter (SCEnKF) is a method is pressure at time t. Reservoir production properties at time t, such as gas-oil ratio (gor), bottom hole

  2. A Monolithic Programmable Optical Filter for RF-Signal Processing

    E-Print Network [OSTI]

    Coldren, Larry A.

    abilities in the frequency domain, properties that are crucial for electronic warfare (EW) systems electronic counterparts [1,2]. By rapidly pre-filtering wide bandwidth analog signals in the optical domain

  3. AVTA: Oil Bypass Filter Specifications and Test Procedures

    Broader source: Energy.gov [DOE]

    PuraDYN Oil Bypass Filtration System Evaluation Test Plan methodology is used in the testing of all oil bypass filters on the buses at the Idaho National Laboratory.

  4. Cosmic Ray Rejection by Linear Filtering of Single Images

    E-Print Network [OSTI]

    James E. Rhoads

    2000-02-02T23:59:59.000Z

    We present a convolution-based algorithm for finding cosmic rays in single well-sampled astronomical images. The spatial filter used is the point spread function (approximated by a Gaussian) minus a scaled delta function, and cosmic rays are identified by thresholding the filtered image. This filter searches for features with significant power at spatial frequencies too high for legitimate objects. Noise properties of the filtered image are readily calculated, which allows us to compute the probability of rejecting a pixel not contaminated by a cosmic ray (the false alarm probability). We demonstrate that the false alarm probability for a pixel containing object flux will never exceed the corresponding probability for a blank sky pixel, provided we choose the convolution kernel appropriately. This allows confident rejection of cosmic rays superposed on real objects. Identification of multiple-pixel cosmic ray hits can be enhanced by running the algorithm iteratively, replacing flagged pixels with the background level at each iteration.

  5. Microwave mode shifting antenna system for regenerating particulate filters

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA; Gregoire, Daniel J [Thousand Oaks, CA

    2011-04-26T23:59:59.000Z

    A regeneration system comprises a particulate matter (PM) filter including a microwave energy absorbing surface, and an antenna system comprising N antennas and an antenna driver module that sequentially drives the antenna system in a plurality of transverse modes of the antenna system to heat selected portions of the microwave absorbing surface to regenerate the PM filter, where N is an integer greater than one. The transverse modes may include transverse electric (TE) and/or transverse magnetic (TM) modes.

  6. Streamline Assisted Ensemble Kalman Filter - Formulation and Field Application

    E-Print Network [OSTI]

    Devegowda, Deepak

    2010-10-12T23:59:59.000Z

    KF first proposed by Evensen (1994) and later by Houtekamer and Mitchell (1998). These include the Ensemble Square Root Filter (EnSRF) (Whitaker and Hamill 2002), the Ensemble Adjustment Filter (EAF) (Anderson 2001) and the Ensemble Transform Kalman... is also supported by the extremely wide range of log-permeabilities in Figure 1.4. A considerable number of model cells exhibit extremely high or low values of permeability. This observation is consistent with previous findings (Gu and Oliver 2006...

  7. Physics prospects of UV-filtered overlap quarks

    E-Print Network [OSTI]

    Stephan Durr; Christian Hoelbling; Urs Wenger

    2005-11-22T23:59:59.000Z

    Some key features of the overlap operator with a UV-filtered Wilson kernel are discussed. The first part concerns spectral properties of the underlying shifted hermitean Wilson operator and the relation to the observed speedup of the overlap construction. Next, the localization of the filtered overlap and its axial-vector renormalization constant are discussed. Finally, results of an exploratory scaling study for $m_{ud}, m_s$ and $f_\\pi, f_K$ are presented.

  8. Shielded regeneration heating element for a particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-01-04T23:59:59.000Z

    An exhaust system includes a particulate filter (PF) that is disposed downstream from an engine. The PF filters particulates within an exhaust from the engine. A heating element heats particulate matter in the PF. A catalyst substrate or a flow converter is disposed upstream from said heating element. The catalyst substrate oxidizes the exhaust prior to reception by the heating element. The flow converter converts turbulent exhaust flow to laminar exhaust flow prior to reception by the heating element.

  9. Diesel particulate filter regeneration via resistive surface heating

    SciTech Connect (OSTI)

    Gonze, Eugene V; Ament, Frank

    2013-10-08T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system includes: a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine; and a grid of electrically resistive material that is applied to an exterior upstream surface of the PF and that selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF.

  10. Zone heated inlet ignited diesel particulate filter regeneration

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2012-06-26T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system includes: a particulate filter (PF) that is disposed downstream of the engine and that filters particulates from the exhaust; and a grid that includes electrically resistive material that is segmented by non-conductive material into a plurality of zones and wherein the grid is applied to an exterior upstream surface of the PF.

  11. Method and apparatus for selective filtering of ions

    DOE Patents [OSTI]

    Page, Jason S. (Kennewick, WA); Tang, Keqi (Richland, WA); Smith, Richard D. (Richland, WA)

    2009-04-07T23:59:59.000Z

    An adjustable, low mass-to-charge (m/z) filter is disclosed employing electrospray ionization to block ions associated with unwanted low m/z species from entering the mass spectrometer and contributing their space charge to down-stream ion accumulation steps. The low-mass filter is made by using an adjustable potential energy barrier from the conductance limiting terminal electrode of an electrodynamic ion funnel, which prohibits species with higher ion mobilities from being transmitted. The filter provides a linear voltage adjustment of low-mass filtering from m/z values from about 50 to about 500. Mass filtering above m/z 500 can also be performed; however, higher m/z species are attenuated. The mass filter was evaluated with a liquid chromatography-mass spectrometry analysis of an albumin tryptic digest and resulted in the ability to block low-mass, "background" ions which account for 40-70% of the total ion current from the ESI source during peak elution.

  12. Off-shell supersymmetry and filtered Clifford supermodules

    E-Print Network [OSTI]

    Charles F. Doran; Michael G. Faux; S. James Gates, Jr.; Tristan Hubsch; Kevin M. Iga; Gregory D. Landweber

    2006-03-05T23:59:59.000Z

    An off-shell representation of supersymmetry is a representation of the super Poincare algebra on a dynamically unconstrained space of fields. We describe such representations formally, in terms of the fields and their spacetime derivatives, and we interpret the physical concept of engineering dimension as an integral grading. We prove that formal graded off-shell representations of one-dimensional N-extended supersymmetry, i.e., the super Poincare algebra p^{1|N}, correspond to filtered Clifford supermodules over Cl(N). We also prove that formal graded off-shell representations of two-dimensional (p,q)-supersymmetry, i.e., the super Poincare algebra p^{1,1|p,q}, correspond to bifiltered Clifford supermodules over Cl(p+q). Our primary tools are the formal deformations of filtered superalgebras and supermodules, which give a one-to-one correspondence between filtered spaces and graded spaces with even degree-shifting injections. This generalizes the machinery developed by Gerstenhaber to prove that every filtered algebra is a deformation of its associated graded algebra. Our treatment extends Gerstenhaber's discussion to the case of filtrations which are compatible with a supersymmetric structure, as well as to filtered modules in addition to filtered algebras. We also describe the analogous constructions for bifiltrations and bigradings.

  13. 2592 IEEE TRANSACTIONS ON SIGNAL PROCESSING, VOL. 51, NO. 10, OCTOBER 2003 Gaussian Particle Filtering

    E-Print Network [OSTI]

    filters, nonlinear non-Gaussian stochastic systems, particle filters, sequential Bayesian estimation, sequential sam- pling methods, unscented Kalman filter. I. INTRODUCTION NONLINEAR filtering problems arise. The problem consists of estimating a possibly dynamic state of a nonlinear stochastic system, based on a set

  14. Theory of filtered type-II PDC in the continuous-variable domain: Quantifying the impacts of filtering

    E-Print Network [OSTI]

    Andreas Christ; Cosmo Lupo; Matthias Reichelt; Torsten Meier; Christine Silberhorn

    2014-08-16T23:59:59.000Z

    Parametric down-conversion (PDC) forms one of the basic building blocks for quantum optical experiments. However, the intrinsic multimode spectral-temporal structure of pulsed PDC often poses a severe hindrance for the direct implementation of the heralding of pure single-photon states or, for example, continuous-variable entanglement distillation experiments. To get rid of multimode effects narrowband frequency filtering is frequently applied to achieve a single-mode behavior. A rigorous theoretical description to accurately describe the effects of filtering on PDC, however, is still missing. To date, the theoretical models of filtered PDC are rooted in the discrete-variable domain and only account for filtering in the low gain regime, where only a few photon pairs are emitted at any single point in time. In this paper we extend these theoretical descriptions and put forward a simple model, which is able to accurately describe the effects of filtering on PDC in the continuous-variable domain. This developed straightforward theoretical framework enables us to accurately quantify the trade-off between suppression of higher-order modes, reduced purity and lowered Einstein-Podolsky-Rosen (EPR) entanglement, when narrowband filters are applied to multimode type-II PDC.

  15. Fuel Efficient Diesel Particulate Filter (DPF) Modeling and Development

    SciTech Connect (OSTI)

    Stewart, Mark L.; Gallant, Thomas R.; Kim, Do Heui; Maupin, Gary D.; Zelenyuk, Alla

    2010-08-01T23:59:59.000Z

    The project described in this report seeks to promote effective diesel particulate filter technology with minimum fuel penalty by enhancing fundamental understanding of filtration mechanisms through targeted experiments and computer simulations. The overall backpressure of a filtration system depends upon complex interactions of particulate matter and ash with the microscopic pores in filter media. Better characterization of these phenomena is essential for exhaust system optimization. The acicular mullite (ACM) diesel particulate filter substrate is under continuing development by Dow Automotive. ACM is made up of long mullite crystals which intersect to form filter wall framework and protrude from the wall surface into the DPF channels. ACM filters have been demonstrated to effectively remove diesel exhaust particles while maintaining relatively low backpressure. Modeling approaches developed for more conventional ceramic filter materials, such as silicon carbide and cordierite, have been difficult to apply to ACM because of properties arising from its unique microstructure. Penetration of soot into the high-porosity region of projecting crystal structures leads to a somewhat extended depth filtration mode, but with less dramatic increases in pressure drop than are normally observed during depth filtration in cordierite or silicon carbide filters. Another consequence is greater contact between the soot and solid surfaces, which may enhance the action of some catalyst coatings in filter regeneration. The projecting crystals appear to provide a two-fold benefit for maintaining low backpressures during filter loading: they help prevent soot from being forced into the throats of pores in the lower porosity region of the filter wall, and they also tend to support the forming filter cake, resulting in lower average cake density and higher permeability. Other simulations suggest that soot deposits may also tend to form at the tips of projecting crystals due to the axial velocity component of exhaust moving down the filter inlet channel. Soot mass collected in this way would have a smaller impact on backpressure than soot forced into the flow restrictions deeper in the porous wall structure. This project has focused on the development of computational, analytical, and experimental techniques that are generally applicable to a wide variety of exhaust aftertreatment technologies. By helping to develop improved fundamental understanding pore-scale phenomena affecting filtration, soot oxidation, and NOX abatement, this cooperative research and development agreement (CRADA) has also assisted Dow Automotive in continuing development and commercialization of the ACM filter substrate. Over the course of this research project, ACM filters were successfully deployed on the Audi R10 TDI racecar which won the 24 Hours of LeMans endurance race in 2006, 2007, and 2008; and the 12 Hours of Sebring endurance race in 2006 and 2007. It would not have been possible for the R10 to compete in these traditionally gasoline-dominated events without reliable and effective exhaust particulate filtration. These successes demonstrated not only the performance of automotive diesel engines, but the efficacy of DPF technology as it was being deployed around the world to meet new emissions standards on consumer vehicles. During the course of this CRADA project, Dow Automotive commercialized their ACM DPF technology under the AERIFYTM DPF brand.

  16. Magnetic filtration process, magnetic filtering material, and methods of forming magnetic filtering material

    DOE Patents [OSTI]

    Taboada-Serrano, Patricia; Tsouris, Constantino; Contescu, Cristian I; McFarlane, Joanna

    2013-10-08T23:59:59.000Z

    The present invention provides magnetically responsive activated carbon, and a method of forming magnetically responsive activated carbon. The method of forming magnetically responsive activated carbon typically includes providing activated carbon in a solution containing ions of ferrite forming elements, wherein at least one of the ferrite forming elements has an oxidation state of +3 and at least a second of the ferrite forming elements has an oxidation state of +2, and increasing pH of the solution to precipitate particles of ferrite that bond to the activated carbon, wherein the activated carbon having the ferrite particles bonded thereto have a positive magnetic susceptibility. The present invention also provides a method of filtering waste water using magnetic activated carbon.

  17. Comment submitted by the Air Conditioning, Heating and Refrigeration Institute (AHRI) regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by the Air Conditioning, Heating and Refrigeration Institute (AHRI) regarding the Energy Star Verification Testing Program

  18. Abstracts submitted for the thirty-first annual meeting, Division of Plasma Physics, November 13--17, 1989

    SciTech Connect (OSTI)

    Not Available

    1989-09-01T23:59:59.000Z

    This report contains abstracts of papers that are submitted for the 31st annual meeting of the Division of Plasma Physics, November 13--17, 1989. (LSP)

  19. Comment submitted by the Association of Home Appliance Manufacturers (AHAM) regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by the Association of Home Appliance Manufacturers (AHAM) regarding the Energy Star Verification Testing Program

  20. Comment submitted by the North American Association of Food Equipment Manufacturers (NAFEM) regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by the North American Association of Food Equipment Manufacturers (NAFEM) regarding the Energy Star Verification Testing Program

  1. Characterization of Filters Loaded With Reactor Strontium Carbonate - 13203

    SciTech Connect (OSTI)

    Josephson, Walter S. [Worley Parsons Polestar, 601 Williams Boulevard, Suite 4A, Richland WA 99352 (United States)] [Worley Parsons Polestar, 601 Williams Boulevard, Suite 4A, Richland WA 99352 (United States); Steen, Franciska H. [Pacific Northwest National Laboratory, P.O. Box 999, Richland WA 99352 (United States)] [Pacific Northwest National Laboratory, P.O. Box 999, Richland WA 99352 (United States)

    2013-07-01T23:59:59.000Z

    A collection of three highly radioactive filters containing reactor strontium carbonate were being prepared for disposal. All three filters were approximately characterized at the time of manufacture by gravimetric methods. The first filter had been partially emptied, and the quantity of residual activity was uncertain. Dose rate to activity modeling using the Monte-Carlo N Particle (MCNP) code was selected to confirm the gravimetric characterization of the full filters, and to fully characterize the partially emptied filter. Although dose rate to activity modeling using MCNP is a common technique, it is not often used for Bremsstrahlung-dominant materials such as reactor strontium. As a result, different MCNP modeling options were compared to determine the optimum approach. This comparison indicated that the accuracy of the results were heavily dependent on the MCNP modeling details and the location of the dose rate measurement point. The optimum model utilized a photon spectrum generated by the Oak Ridge Isotope Generation and Depletion (ORIGEN) code and dose rates measured at 30 cm. Results from the optimum model agreed with the gravimetric estimates within 15%. It was demonstrated that dose rate to activity modeling can be successful for Bremsstrahlung-dominant radioactive materials. However, the degree of success is heavily dependent on the choice of modeling techniques. (authors)

  2. Walsh-synthesized noise-filtering quantum logic

    E-Print Network [OSTI]

    H. Ball; M. J. Biercuk

    2014-10-07T23:59:59.000Z

    We study a novel class of open-loop control protocols constructed to perform arbitrary nontrivial single-qubit logic operations robust against time-dependent non-Markovian noise. Amplitude and phase modulation protocols are crafted leveraging insights from functional synthesis and the basis set of Walsh functions. We employ the experimentally validated generalized filter-transfer function formalism in order to find optimized control protocols for target operations in SU(2) by defining a cost function for the filter-transfer function to be minimized through the applied modulation. Our work details the various techniques by which we define and then optimize the filter-synthesis process in the Walsh basis, including the definition of specific analytic design rules which serve to efficiently constrain the available synthesis space. This approach yields modulated-gate constructions consisting of chains of discrete pulse-segments of arbitrary form, whose modulation envelopes possess intrinsic compatibility with digital logic and clocking. We derive novel families of Walsh-modulated noise filters designed to suppress dephasing and coherent amplitude-damping noise, and describe how well-known sequences derived in NMR also fall within the Walsh-synthesis framework. Finally, our work considers the effects of realistic experimental constraints such as limited modulation bandwidth on achievable filter performance.

  3. Staged fluidized-bed combustion and filter system

    DOE Patents [OSTI]

    Mei, Joseph S. (Morgantown, WV); Halow, John S. (Waynesburg, PA)

    1994-01-01T23:59:59.000Z

    A staged fluidized-bed combustion and filter system for substantially reducing the quantity of waste through the complete combustion into ash-type solids and gaseous products. The device has two fluidized-bed portions, the first primarily as a combustor/pyrolyzer bed, and the second as a combustor/filter bed. The two portions each have internal baffles to define stages so that material moving therein as fluidized beds travel in an extended route through those stages. Fluidization and movement is achieved by the introduction of gases into each stage through a directional nozzle. Gases produced in the combustor/pyrolyzer bed are permitted to travel into corresponding stages of the combustor/filter bed through screen filters that permit gas flow but inhibit solids flow. Any catalyst used in the combustor/filter bed is recycled. The two beds share a common wall to minimize total volume of the system. A slightly modified embodiment can be used for hot gas desulfurization and sorbent regeneration. Either side-by-side rectangular beds or concentric beds can be used. The system is particularly suited to the processing of radioactive and chemically hazardous waste.

  4. Kalman filtering to suppress spurious signals in Adaptive Optics control

    SciTech Connect (OSTI)

    Poyneer, L; Veran, J P

    2010-03-29T23:59:59.000Z

    In many scenarios, an Adaptive Optics (AO) control system operates in the presence of temporally non-white noise. We use a Kalman filter with a state space formulation that allows suppression of this colored noise, hence improving residual error over the case where the noise is assumed to be white. We demonstrate the effectiveness of this new filter in the case of the estimated Gemini Planet Imager tip-tilt environment, where there are both common-path and non-common path vibrations. We discuss how this same framework can also be used to suppress spatial aliasing during predictive wavefront control assuming frozen flow in a low-order AO system without a spatially filtered wavefront sensor, and present experimental measurements from Altair that clearly reveal these aliased components.

  5. Estimate the Electromechanical States Using Particle Filtering and Smoothing

    SciTech Connect (OSTI)

    Meng, Da; Zhou, Ning; Lu, Shuai; Lin, Guang

    2012-07-22T23:59:59.000Z

    Accurate knowledge of electromechanical states is critical for efficient and reliable control of a power system. This paper proposes a particle filtering approach to estimate the electromechanical states of power systems from Phasor Measurement Unit (PMU) data. Without having to go through laborious linearization procedure, the proposed particle filtering techniques can estimate states of a complex power system, which is often non-linear and has non-Gaussian noise. The proposed method is evaluated using a multi-machine system with both large and small disturbances. Sensitivity studies of the dynamic state estimation performance are also presented to show the robustness of the proposed method. The inherent decoupling properties of particle filtering make it highly scalable and the potential to reduce computational time through parallel implementation is very promising.

  6. Novel Oxide-Oxide Fiber Reinforced Hot Gas Filter Development

    SciTech Connect (OSTI)

    Wagner, R.A. [Babcock and Wilcox Co., Lynchburg, VA (United States)

    1996-12-31T23:59:59.000Z

    This report describes the fabrication and testing of continuous fiber ceramic composites (CFCC) based hot gas filters. The work was divided into two primary tasks. In the first task, a preliminary set of compositions was fabricated in the form of open end tubes and characterized. The results of the first task were then used to identify the most promising compositions for sub-scale fabrication and testing. In addition to laboratory measurements of permeability and strength, exposure testing in a coal combustion environment was performed to assess the thermo-chemical stability of the CFCC materials. The results of this testing were then used to down-select the filter composition for full-scale filter fabrication and testing in the optional Phase II of the program.

  7. Development of active porous medium filters based on plasma textiles

    SciTech Connect (OSTI)

    Kuznetsov, Ivan A.; Saveliev, Alexei V.; Rasipuram, Srinivasan; Kuznetsov, Andrey V.; Brown, Alan; Jasper, Warren [Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC 27695 (United States); Textile Engineering Chemistry and Science, North Carolina State University, Raleigh, NC 27695 (United States)

    2012-05-15T23:59:59.000Z

    Inexpensive, flexible, washable, and durable materials that serve as antimicrobial filters and self-decontaminating fabrics are needed to provide active protection to people in areas regularly exposed to various biohazards, such as hospitals and bio research labs working with pathogens. Airlines and cruise lines need such material to combat the spread of infections. In households these materials can be used in HVAC filters to fight indoor pollution, which is especially dangerous to people suffering from asthma. Efficient filtering materials are also required in areas contaminated by other types of hazardous dust particulates, such as nuclear dust. The primary idea that guided the undertaken study is that a microplasma-generating structure can be embedded in a textile fabric to generate a plasma sheath (''plasma shield'') that kills bacterial agents coming in contact with the fabric. The research resulted in the development of a plasma textile that can be used for producing new types of self-decontaminating garments, fabrics, and filter materials, capable of activating a plasma sheath that would filter, capture, and destroy any bacteriological agent deposited on its surface. This new material relies on the unique antimicrobial and catalytic properties of cold (room temperature) plasma that is benign to people and does not cause thermal damage to many polymer textiles, such as Nomex and polypropylene. The uniqueness of cold plasma as a disinfecting agent lies in the inability of bacteria to develop resistance to plasma exposure, as they can for antibiotics. Plasma textiles could thus be utilized for microbial destruction in active antimicrobial filters (for continuous decontamination and disinfection of large amounts of air) as well as in self-decontaminating surfaces and antibacterial barriers (for example, for creating local antiseptic or sterile environments around wounds and burns).

  8. Low exhaust temperature electrically heated particulate matter filter system

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI); Bhatia, Garima (Bangalore, IN)

    2012-02-14T23:59:59.000Z

    A system includes a particulate matter (PM) filter, a sensor, a heating element, and a control module. The PM filter includes with an upstream end that receives exhaust gas, a downstream end and multiple zones. The sensor detects a temperature of the exhaust gas. The control module controls current to the heating element to convection heat one of the zones and initiate a regeneration process. The control module selectively increases current to the heating element relative to a reference regeneration current level when the temperature is less than a predetermined temperature.

  9. Zoned electrical heater arranged in spaced relationship from particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-11-15T23:59:59.000Z

    A system comprises a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  10. Benchmarking Compressed Sensing, Super-Resolution, and Filter Diagonalization

    E-Print Network [OSTI]

    Markovich, Thomas; Sanders, Jacob N; Aspuru-Guzik, Alan

    2015-01-01T23:59:59.000Z

    Signal processing techniques have been developed that use different strategies to bypass the Nyquist sampling theorem in order to recover more information than a traditional discrete Fourier transform. Here we examine three such methods: filter diagonalization, compressed sensing, and super-resolution. We apply them to a broad range of signal forms commonly found in science and engineering in order to discover when and how each method can be used most profitably. We find that filter diagonalization provides the best results for Lorentzian signals, while compressed sensing and super-resolution perform better for arbitrary signals.

  11. Wireless zoned particulate matter filter regeneration control system

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA

    2011-10-04T23:59:59.000Z

    An assembly includes a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and multiple zones. An absorbing layer absorbs microwave energy in one of N frequency ranges and is arranged with the upstream end. N is an integer. A frequency selective filter has M frequency selective segments and receives microwave energy in the N frequency ranges. M is an integer. One of the M frequency selective segments permits passage of the microwave energy in one of the N frequency ranges and does not permit passage of microwave energy in the other of the N frequency ranges.

  12. PWM drive filter inductor influence on transient immunity

    SciTech Connect (OSTI)

    Wagner, V.E. [Detroit Edison, MI (United States); Strangas, E. [Michigan State Univ., East Lansing, MI (United States). Dept. of Electrical Engineering

    1995-12-31T23:59:59.000Z

    Surges of less than 200% magnitude caused by utility capacitor switching can disrupt PWM drives. In this paper, the disruption mechanism is investigated by SPICE simulation of the drive and the results are compared to field tests. An over current surge in the rectifier/filter section and dc over voltage are the most common disruption mechanisms. The drive dc filter inductor is the most important factor in capacitor transient sensitivity of the drive. A drive without the inductor or one in which the inductor is saturated by the transient is vulnerable to disruption.

  13. Electrically heated particulate filter regeneration using hydrocarbon adsorbents

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-02-01T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine. A grid of electrically resistive material selectively heats exhaust passing through the upstream end to initiate combustion of particulates within the PF. A hydrocarbon adsorbent coating applied to the PF releases hydrocarbons into the exhaust to increase a temperature of the combustion of the particulates within the PF.

  14. Penn Engineering Alumni Society Report : October 2010 Submitted by Farnia Fresnel, President

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Support the Career Services mentoring program Host a summer BBQ for graduate engineering studentsPenn Engineering Alumni Society Report : October 2010 Submitted by Farnia Fresnel, President http://www.seas.upenn.edu/alumni/alumnisociety The Penn Engineering Alumni Society Board is supported by more than 30 active members who attend monthly

  15. Penn Engineering Alumni Society Report (May 2009) Submitted by Harris G. Romanoff, President ('98)

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Participated in mock interview sessions for students, coordinated by Engineering Career Services Annual EASPenn Engineering Alumni Society Report (May 2009) Submitted by Harris G. Romanoff, President ('98) We had a very exciting and event filled calendar this past year in the Engineering Alumni Society

  16. 2-1-08 submitted to Energy Engineering Action-Oriented Benchmarking

    E-Print Network [OSTI]

    analysis of system and component energy use metrics and features. If coupled with the appropriate decision-tree2-1-08 submitted to Energy Engineering Action-Oriented Benchmarking: Using the CEUS Database Norman Bourassa & Martha Brook, California Energy Commission ABSTRACT The 2006 Commercial End Use Survey

  17. Submitted to Handbook of Brain Theory and Neural Networks, 2. Helmholtz Machines

    E-Print Network [OSTI]

    Dayan, Peter

    Submitted to Handbook of Brain Theory and Neural Networks, 2. Helmholtz Machines and Wake). The Helmholtz machine (Dayan et al, 1995) is an example of an approach to unsupervised learning called analysis the paired images and generators to train a graphics model. In the Helmholtz machine, we attempt to have

  18. Submitted to the Annals of Applied Statistics INTERPOLATING FIELDS OF CARBON MONOXIDE

    E-Print Network [OSTI]

    Nychka, Douglas

    and transport. CO AMS 2000 subject classifications: Carbon monoxide; satellite data; Bayesian hierarchi- cal models; interpolation; data assimilation 1 imsart-aoas ver. 2007/04/13 file: COpaper.tex date: March 24Submitted to the Annals of Applied Statistics INTERPOLATING FIELDS OF CARBON MONOXIDE DATA USING

  19. Oil Independence: Achievable National Goal or Empty Slogan? Submitted May 25, 2007

    E-Print Network [OSTI]

    07--1693 Oil Independence: Achievable National Goal or Empty Slogan? Submitted May 25, 2007 Word-488-2413; email: singhm@anl.gov #12;Greene, Leiby, Patterson, Plotkin and Singh 1 ABSTRACT Oil independence has. A rigorous, measurable definition is proposed: to reduce the costs of oil dependence to less than 1% of GDP

  20. Thermo-mechanical modeling of plasterboard lined partition submitted to fire load.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Thermo-mechanical modeling of plasterboard lined partition submitted to fire load. Authors: S.heck@cstb.fr Abstract: An important problem is the development of a thermo-mechanical model of plasterboard lined and the experimental validation of a deterministic and a probabilistic thermo-mechanical model of cardboard

  1. To be submitted to ApJ A Formalism for Covariant Polarized Radiative Transport by Ray

    E-Print Network [OSTI]

    Gammie, Charles F.

    To be submitted to ApJ A Formalism for Covariant Polarized Radiative Transport by Ray Tracing that the transport equation in vacuo is kµ µN = 0. We show that this is equivalent to Broderick & Blandford (2004)'s a procedure for solving the polarized radiative transfer equation in a curved spacetime. Other possible

  2. A. Student Record Guidelines Student records submitted become the property of the University and cannot be

    E-Print Network [OSTI]

    Wu, Shin-Tson

    A. Student Record Guidelines Student records submitted become the property of the University and cannot be returned to the student or released to a third party. Copies of student records will be released only upon receipt of a written request signed by the student. Student records are stored in paper

  3. SELECTION OF FACULTY RESEARCH ADVISOR (Submit to the Graduate Education Office, 4404 TBBC)

    E-Print Network [OSTI]

    Simons, Jack

    32 ` SELECTION OF FACULTY RESEARCH ADVISOR (Submit to the Graduate Education Office, 4404 TBBC) _____________________________________________________________(date) II. List your top three choices for your research advisor. 1st choice a Departmental Safety Seminar, and the research advisor must assume responsibility for his/her lack of training

  4. Submitted 08-13-09: Energy Policy Putting Renewables and Energy Efficiency To Work

    E-Print Network [OSTI]

    Kammen, Daniel M.

    1 Submitted 08-13-09: Energy Policy Putting Renewables and Energy Efficiency To Work: How Many Jobs is presented. The model synthesizes data from 15 job studies covering renewable energy (RE), energy efficiency an additional 500,000 job-years. Keywords: green jobs, renewable energy employment, energy efficiency employment

  5. Quick Guide for Submitting a Vendor Site Add Request On-Line

    E-Print Network [OSTI]

    Quick Guide for Submitting a Vendor Site Add Request On-Line · Log into Oracle · Click on "Vendor Request" responsibility · Conduct a Vendor Search to find the vendor in the database · Click on "Sites you want her/him to know about this vendor site add request. For Post docs ­ enter Lab/Group Name, PI

  6. Quick Guide for Submitting a Vendor Add Request On-Line

    E-Print Network [OSTI]

    Quick Guide for Submitting a Vendor Add Request On-Line · Log into Oracle · Click on "Vendor Request" responsibility · Conduct a Vendor Search to ensure the vendor does not already exist · Click on "Request New Vendor" · Fill in vendor information and ask the vendor to complete any required forms (W9

  7. Security Federation in the Vehicular Networks Submitted to SAR-SSI 2011 1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Security Federation in the Vehicular Networks Submitted to SAR-SSI 2011 1 Federated claims based authentication and access control in the vehicular networks Ramzi Debab (r_debab@esi.dz)* Yacine Challal in order to federate the existing techniques and even future ones. WS-Federation is one of the keys aiming

  8. Submitted to Journal of Biomechanics, July 2008; in revised form May 2009. Statistical Osteoporosis Models Using

    E-Print Network [OSTI]

    Rumpf, Martin

    Submitted to Journal of Biomechanics, July 2008; in revised form May 2009. Statistical Osteoporosis Rumpf Hans-Joachim Wilke Osteoporosis is a widely spread disease with severe consequences for patients and the mechanisms leading to fractures of trabecular bone due to osteoporosis, numerous researchers employ micro

  9. Submitted to Advances in Applied Mechanics, March 2009 Revised version, June 2009

    E-Print Network [OSTI]

    by modelling of six brittle materials (dense and porous SiC ceramics, a micro-concrete, an ultra-high strength is observed in brittle materials such as ceramics, concrete, glass or rocks submitted to impact or blast loadings in open quarry or ballistic efficiencies of armours or concrete structures against impact loadings

  10. Submitted to the XXXII th International Conference on High Energy Physics

    E-Print Network [OSTI]

    of primary soft gluons into the gap gives rise to so­called global logarithms which can be resummed [9Submitted to the XXXII th International Conference on High Energy Physics August 16th -- 22nd, 2004, Beijing, China 6­0289 Parallel Session: QCD Soft Interjet Energy Flow in photoproduction at HERA ZEUS

  11. NIF NOI 2009_E Page 1 of 6 Notice of Intent to Submit an Application

    E-Print Network [OSTI]

    Martin, Jeff

    NIF NOI 2009_E Page 1 of 6 Notice of Intent to Submit an Application New Initiatives Fund (NIF Foundation for Innovation NIF NOI 2009_E Page 2 of 6 Date printed (dd/mm/yyyy): 27/06/2008 Canadian

  12. Submitted to 15th Power System Computation Conference (PSCC), August 2005, Lige, Belgium

    E-Print Network [OSTI]

    of the power grid is automated, this degree of automation is much lower than most people realize. HumanSubmitted to 15th Power System Computation Conference (PSCC), August 2005, Lige, Belgium REDUCING THE RISK OF MAJOR BLACKOUTS THROUGH IMPROVED POWER SYSTEM VISUALIZATION Thomas J. Overbye Douglas A

  13. Manuscript submitted to Electricity Journal 6/2/2006 Steven Letendre Richard Perez

    E-Print Network [OSTI]

    Perez, Richard R.

    Manuscript submitted to Electricity Journal 6/2/2006 Steven Letendre Richard Perez The Prometheus of the U.S. electric grid has become increasingly complex as it has been called upon to accommodate growth in total electricity consumption of 75%, accompanied by an increase in non-coincident peak demand in excess

  14. MoIAC Pre-Audit Form Ways to submit this form

    E-Print Network [OSTI]

    Noble, James S.

    information: #12;MoIAC Pre-Audit Form Major Energy Consuming Equipment: Please provide informationMoIAC Pre-Audit Form Ways to submit this form: 1. Fill up the form and fax it to 573-882-2693 Attn: Dr. Bin Wu 2. Print and return this form by mail to: Dr. Bin Wu University of Missouri

  15. http://mc.manuscriptcentral.com/issue-ptrsa Submitted to Phil. Trans. R. Soc. A -Issue

    E-Print Network [OSTI]

    Gutowski, Timothy

    strong correlation between rates of metals usage and Gross Domestic Product (GDP) (R2 = 0.79), with per on the order of a third of the total worldwide primary energy use per year (~ 160 EJ), and contributing://mc.manuscriptcentral.com/issue-ptrsa Submitted to Phil. Trans. R. Soc. A - Issue #12;ForReview Only 1 The Energy Required to Produce Materials

  16. LOCAL UNDERSTANDING OF HYDRO-CLIMATE CHANGES IN MONGOLIA Submitted by

    E-Print Network [OSTI]

    MacDonald, Lee

    THESIS LOCAL UNDERSTANDING OF HYDRO-CLIMATE CHANGES IN MONGOLIA Submitted by Tumenjargal Sukh 2012 All Rights Reserved #12;ABSTRACT LOCAL UNDERSTANDING OF HYDRO-CLIMATE CHANGES IN MONGOLIA Air the degree of change of Mongolian water resources. We find that herders' local knowledge of hydro

  17. Isospectral Metrics on Classical Compact Simple Lie Groups Submitted to the Faculty

    E-Print Network [OSTI]

    Proctor, Emily

    Isospectral Metrics on Classical Compact Simple Lie Groups A Thesis Submitted to the Faculty;Acknowledgements This thesis is the product of support from a number of people. First and foremost, it has been. I give thanks to Peter Doyle for leading me out of a blind alley, to Dorothee Schueth for helping me

  18. The Near-Infrared Tracks of Protostellar Outflows. A thesis submitted for the degree of

    E-Print Network [OSTI]

    The Near-Infrared Tracks of Protostellar Outflows. A thesis submitted for the degree of Doctor of objects are described. In each case, the technique of near-infrared imaging is used in order to understand designed to study examples of very bright outflows in the near-infrared using the UFTI high

  19. Blue and Gold Society Please Submit requests at least two weeks prior

    E-Print Network [OSTI]

    Jiang, Huiqiang

    Blue and Gold Society Please Submit requests at least two weeks prior to your event date Today: ____________________________ ___________________________________________ ___________________________________________ ___________________________________________ Assistance Required Number of Blue and Gold members needed: _______ Arrival Time: __: __ Departing Time: __: __ Blue and Gold Society attire: Formal (suit) Casual (rugby shirt) Other Any Additional Information

  20. Computational Modeling and the Experimental Plasma Research Program A White Paper Submitted to the FESAC Subcommittee

    E-Print Network [OSTI]

    Computational Modeling and the Experimental Plasma Research Program A White Paper Submitted of the fusion energy program. The experimental plasma research (EPR) program is well positioned to make major in fusion development and promote scientific discovery. Experimental plasma research projects explore

  1. M.S. Physics and Astronomy, University of Pittsburgh, 2005 Submitted to the Graduate Faculty of

    E-Print Network [OSTI]

    Minnesota, University of

    M.S. Physics and Astronomy, University of Pittsburgh, 2005 Submitted to the Graduate Faculty of the Department of Physics and Astronomy in partial fulfillment of the requirements for the degree of Doctor of Philosophy University of Pittsburgh 2009 Andrew J. Mason B.S. Physics, State University of New York

  2. BEHAVIOUR OF A HIGHLY PRESSURISED TANK OF GHz, SUBMITTED TO A THERMAL OR MECHANICAL IMPACT

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2000-41 BEHAVIOUR OF A HIGHLY PRESSURISED TANK OF GHz, SUBMITTED TO A THERMAL OR MECHANICAL IMPACT will significantly reduce the volume of the necessary tank(s). Whatever this pressure and whatever the volume of the tank(s), the storage System must be designed in such a way that the consequences of an accident

  3. Submitted by In partial fulfillment of the requirements for the degree of

    E-Print Network [OSTI]

    MacDonald, Lee

    THESIS Submitted by In partial fulfillment of the requirements for the degree of Colorado State the variogram and Moran's I analyses indicate that the first hypothesis may be supported. Variogram gamma values the winter season. iii #12;Results of the variogram analyses for the multiple scale snow depth datasets do

  4. Submitted to the Annals of Applied Statistics INTEGRATIVE MODEL-BASED CLUSTERING OF MICROARRAY

    E-Print Network [OSTI]

    Booth, James

    , Expression, AML. 1 #12;2 KORMAKSSON ET AL. can guide the design of more specifically targeted therapies. DueSubmitted to the Annals of Applied Statistics INTEGRATIVE MODEL-BASED CLUSTERING OF MICROARRAY to multiple data types of a similar nature, which leads to an integrated analysis over multiple data platforms

  5. Revised version submitted to Mineralogy and Petrology the 21st of June 20111

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    1 Revised version submitted to Mineralogy and Petrology the 21st of June 20111 2 Timescale of open Brest Cedex 3, France.24 insu-00617942,version1-31Aug2011 Author manuscript, published in "Mineralogy to that previously estimated for a Mg#70 MORB from mineralogical and chemical data.32 Then, we approached

  6. Submitted to Renewable Energy, 5 December 2009 The technical potential for off-peak electricity

    E-Print Network [OSTI]

    Hughes, Larry

    October 2009 #12;The technical potential for off-peak electricity to serve as backup in wind. This paper examines the technical potential of off-peak electricity to ensure that wind-charged thermalSubmitted to Renewable Energy, 5 December 2009 ERG/200910 The technical potential for off

  7. Submitted to the IEEE Transactions on Biomedical Engineering Wavelet Compression of ECG Signals by the Set

    E-Print Network [OSTI]

    Submitted to the IEEE Transactions on Biomedical Engineering Wavelet Compression of ECG Signals 12180-3590 January 12, 2000 Abstract A wavelet ECG data codec based on the Set Partitioning) case and applied it to compression of ECG data. Experiments on selected records from the MIT

  8. Submitted to Conference on Dredged Material Management: Options and Environmental Considerations

    E-Print Network [OSTI]

    Brookhaven National Laboratory

    Submitted to Conference on Dredged Material Management: Options and Environmental Considerations Cambridge, Massachusetts 3-6 December 2000 Decontamination and Beneficial Use of Dredged Materials* E of dredged material decontamination technologies for the NY/NJ Harbor. The goal of the project is to assemble

  9. INTERFACIAL AND TRANSPORT PHENOMENA IN CLOSED-CELL FOAMS Submitted to the Faculty

    E-Print Network [OSTI]

    Pilon, Laurent

    INTERFACIAL AND TRANSPORT PHENOMENA IN CLOSED-CELL FOAMS A Thesis Submitted to the Faculty Sylvania, Techneglas, and Owens Corning provided the glass samples as well as help- ful criticisms the Purdue Glass Laboratory for sharing his expertise on glass and for letting me use his laboratory

  10. Design of an input filter for power factor correction (PFC) AC to DC converters employing an active ripple cancellation

    SciTech Connect (OSTI)

    Lee, D.Y.; Cho, B.H. [Seoul National Univ. (Korea, Republic of). Electrical Engineering Dept.

    1996-12-31T23:59:59.000Z

    An active input filter for power factor correction (PFC) circuit employing ripple current cancellation is proposed to reduce the filter`s size and cost.Switching ripple current can be filtered by an active circuit from the line current. A single stage passive filter with the active filter compensation circuit, a high filter can be synthesized to meet the electromagnetic interference (EMI) and power factor requirements. Analysis of the active filter and design procedure are detailed. Simulation result is presented to verify the high order filter characteristics of proposed scheme.

  11. Wave turbulence on the surface of a ferrofluid submitted to a magnetic field Francois Boyer and Eric Falcon

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Wave turbulence on the surface of a ferrofluid submitted to a magnetic field Francois Boyer the observation of wave turbulence on the surface of a ferrofluid mechanically forced and submitted to a static normal magnetic field. We show that magnetic surface waves arise only above a critical field. The power

  12. Selected Publications by Markus Roggenbach 1. F G Moller, H N Nguyen, M Roggenbach: Simulating Timed CSP, 20 pages, submit-

    E-Print Network [OSTI]

    Miller, Alice

    : Simulating Timed CSP, 20 pages, submit- ted. 2. S Chadwick, J Clarke, A Iliasov, Y Isobe, P James, F Moller undermining rail network safety, 8 pages, submitted. 3. A Gimblett, T Kahsai, L O'Reilly, M Roggenbach James, M Roggenbach: Automatically Verifying Railway Interlockings using SAT- based Model Checking

  13. Part II of manuscript submitted to Sedimentology, May, 2006 Unraveling the conundrum of river response to rising sea level from

    E-Print Network [OSTI]

    Parker, Gary

    Part II of manuscript submitted to Sedimentology, May, 2006 1 Unraveling the conundrum of river to Sedimentology, May, 2006 2 deltas is adapted to describe the response of the Fly-Strickland River system, Papua of manuscript submitted to Sedimentology, May, 2006 3 Pleistocene-Holocene eustatic sea level rise of some 120 m

  14. Photonic crystal ring resonator based optical filters for photonic integrated circuits

    SciTech Connect (OSTI)

    Robinson, S., E-mail: mail2robinson@gmail.com [Department of Electronics and Communication Engineering, Mount Zion College of Engineering and Technology, Pudukkottai-622507, Tamil Nadu (India)

    2014-10-15T23:59:59.000Z

    In this paper, a two Dimensional (2D) Photonic Crystal Ring Resonator (PCRR) based optical Filters namely Add Drop Filter, Bandpass Filter, and Bandstop Filter are designed for Photonic Integrated Circuits (PICs). The normalized output response of the filters is obtained using 2D Finite Difference Time Domain (FDTD) method and the band diagram of periodic and non-periodic structure is attained by Plane Wave Expansion (PWE) method. The size of the device is minimized from a scale of few tens of millimeters to the order of micrometers. The overall size of the filters is around 11.4 ?m 11.4 ?m which is highly suitable of photonic integrated circuits.

  15. MODELING MULTI-OUTPUT FILTERING EFFECTS IN PCMOS Anshul Singh*

    E-Print Network [OSTI]

    Mooney, Vincent

    MODELING MULTI-OUTPUT FILTERING EFFECTS IN PCMOS Anshul Singh* , Arindam Basu , Keck-Voon Ling* and Vincent J. Mooney III*$§ Email: anshul.singh@research.iiit.ac.in, {arindam.basu, ekvling}@ntu, Nanyang Technological University (NTU), Singapore * NTU-Rice Institute of Sustainable and Applied

  16. Design of a Extended Kalman Filter for UAV Localization

    E-Print Network [OSTI]

    Mao, Guoqiang

    Design of a Extended Kalman Filter for UAV Localization Guoqiang Mao§, Sam Drake and Brian D. O Limited, Canberra, Australia Abstract Unmanned aerial vehicles (UAVs) are increasingly used in military and scientific research. Some miniaturized UAVs rely entirely on the global positioning system (GPS

  17. Reactive Rearrangement of Parts under Sensor Inaccuracy: Particle Filter Approach

    E-Print Network [OSTI]

    Reactive Rearrangement of Parts under Sensor Inaccuracy: Particle Filter Approach Hal^uk Bayram, Electrical and Electronic Engineering Bogazici University, Bebek 34342 Istanbul Turkey Abstract-- The paper will be left undisturbed, the robot is required to employ a reactive strategy. A feedback-based event

  18. Grouping annotating and filtering history information in VKB

    E-Print Network [OSTI]

    Akkapeddi, Raghu C.

    2004-09-30T23:59:59.000Z

    to individual events or group of events in the list. Moreover, I explore the value of history event filtering, limiting the edits and groups presented to those that match user descriptions. My contribution in this thesis is the addition of mechanisms whereby...

  19. RAPID SEPARATION METHOD FOR ACTINIDES IN EMERGENCY AIR FILTER SAMPLES

    SciTech Connect (OSTI)

    Maxwell, S.; Noyes, G.; Culligan, B.

    2010-02-03T23:59:59.000Z

    A new rapid method for the determination of actinides and strontium in air filter samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used in emergency response situations. The actinides and strontium in air filter method utilizes a rapid acid digestion method and a streamlined column separation process with stacked TEVA, TRU and Sr Resin cartridges. Vacuum box technology and rapid flow rates are used to reduce analytical time. Alpha emitters are prepared using cerium fluoride microprecipitation for counting by alpha spectrometry. The purified {sup 90}Sr fractions are mounted directly on planchets and counted by gas flow proportional counting. The method showed high chemical recoveries and effective removal of interferences. This new procedure was applied to emergency air filter samples received in the NRIP Emergency Response exercise administered by the National Institute for Standards and Technology (NIST) in April, 2009. The actinide and {sup 90}Sr in air filter results were reported in {approx}4 hours with excellent quality.

  20. Reducing Cache Pollution via Dynamic Data Prefetch Filtering

    E-Print Network [OSTI]

    Lee, Hsien-Hsin "Sean"

    Reducing Cache Pollution via Dynamic Data Prefetch Filtering Xiaotong Zhuang and Hsien-Hsin S. Lee for fast cache accesses, data cache pollution caused by overly aggressive prefetch mechanisms will become to pollution but also throttle bus bandwidth, leading to an overall performance degradation. In this paper, we