National Library of Energy BETA

Sample records for filter author enter

  1. Transistor-based filter for inhibiting load noise from entering a power supply

    DOE Patents [OSTI]

    Taubman, Matthew S

    2013-07-02

    A transistor-based filter for inhibiting load noise from entering a power supply is disclosed. The filter includes a first transistor having an emitter coupled to a power supply, a collector coupled to a load, and a base. The filter also includes a first capacitor coupled between the base of the first transistor and a ground terminal. The filter further includes an impedance coupled between the base and a node between the collector and the load, or a second transistor and second capacitor. The impedance can be a resistor or an inductor.

  2. Neurogastroenterol Motil . Author manuscript Activation of MAP kinase (ERK1/2) in human neonatal colonic enteric

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Neurogastroenterol Motil . Author manuscript Page /1 8 Activation of MAP kinase (ERK1/2) in human The aim of this study was to examine MAP kinase (ERK1/2) activation in the human neonatal colonic enteric of phosphorylated ERK1/2 (P-ERK) in a series of normal human colon samples removed from newborns and in patients

  3. The implementation of Internet filtering in Scottish public libraries Purpose: This study sets out to examine the way that Scottish public library authorities are

    E-Print Network [OSTI]

    Strathclyde, University of

    1 The implementation of Internet filtering in Scottish public libraries Abstract Purpose: This study sets out to examine the way that Scottish public library authorities are implementing filtering a literature review and an analysis of data supplied by the public library services. The data required

  4. Disk filter

    DOE Patents [OSTI]

    Bergman, W.

    1985-01-09

    An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

  5. Disk filter

    DOE Patents [OSTI]

    Bergman, Werner (Pleasanton, CA)

    1986-01-01

    An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

  6. Rotating drum filter

    DOE Patents [OSTI]

    Anson, Donald (Worthington, OH)

    1990-01-01

    A perforated drum (10) rotates in a coaxial cylindrical housing (18) having three circumferential ports (19,22,23), and an axial outlet (24) at one end. The axis (11) is horizontal. A fibrous filter medium (20) is fed through a port (19) on or near the top of the housing (81) by a distributing mechanism (36) which lays a uniform mat (26) of the desired thickness onto the rotating drum (10). This mat (26) is carried by the drum (10) to a second port (23) through which dirty fluid (13) enters. The fluid (13) passes through the filter (26) and the cleaned stream (16) exits through the open end (15) of the drum (10) and the axial port (24) in the housing (18). The dirty filter material (20) is carried on to a third port (22) near the bottom of the housing (18) and drops into a receiver (31) from which it is continuously removed, cleaned (30), and returned (32) to the charging port (36) at the top. To support the filter mat, the perforated cylinder may carry a series of tines (40), shaped blades (41), or pockets, so that the mat (26) will not fall from the drum (10) prematurely. To minimize risk of mat failure, the fluid inlet port (23) may be located above the horizontal centerline (11).

  7. Filtering apparatus

    DOE Patents [OSTI]

    Haldipur, G.B.; Dilmore, W.J.

    1992-09-01

    A vertical vessel is described having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas. 18 figs.

  8. Filtering apparatus

    DOE Patents [OSTI]

    Haldipur, Gaurang B. (Monroeville, PA); Dilmore, William J. (Murrysville, PA)

    1992-01-01

    A vertical vessel having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas.

  9. Producer Individual License Application Java Desktop App Entered demographic data

    E-Print Network [OSTI]

    Demurjian, Steven A.

    TESTING Producer ­ Individual License Application ­ Java Desktop App 7/21/2004 Entered demographic... On `Next', license attachment screen, added a cert letter: Still need to accommodate multiple authorities;On "Submit/Next" ­ Pulled up license with Inquiry tool. Some fields need widening. Didn't pick up

  10. Math 5654 4cr Spring 2010 Prediction and Filtering

    E-Print Network [OSTI]

    Krylov, Nicolai

    Math 5654 4cr Spring 2010 Syllabus Prediction and Filtering Lectures: 10:10am-12:05pm TTh, VinH 364: Saturday, May 15, 4 pm-6 pm. A few homeworks wil be assigned and the grades for them will enter as 2-dimensional case 133 2:2. Multidimensional case 137 3. Linear filtering 147 Chapter 6. Wiener process

  11. Filter apparatus

    DOE Patents [OSTI]

    Kuban, Daniel P. (Oak Ridge, TN); Singletary, B. Huston (Oak Ridge, TN); Evans, John H. (Rockwood, TN)

    1984-01-01

    A plurality of holding tubes are respectively mounted in apertures in a partition plate fixed in a housing receiving gas contaminated with particulate material. A filter cartridge is removably held in each holding tube, and the cartridges and holding tubes are arranged so that gas passes through apertures therein and across the partition plate while particulate material is collected in the cartridges. Replacement filter cartridges are respectively held in holding canisters mounted on a support plate which can be secured to the aforesaid housing, and screws mounted on said canisters are arranged to push replacement cartridges into the cartridge holding tubes and thereby eject used cartridges therefrom.

  12. Activation of MAP Kinase (ERK1/2) in human neonatal colonic enteric nervous system

    E-Print Network [OSTI]

    Boyer, Edmond

    Activation of MAP Kinase (ERK1/2) in human neonatal colonic enteric nervous system Authors Caroline was to examine MAP kinase (ERK1/2) activation in the human neonatal colonic enteric nervous system. For this, we investigated by immunocytochemistry the cellular localization of phosphorylated ERK1/2 (P-ERK) in a series

  13. Optimization Online - Enter Your Password to Continue

    E-Print Network [OSTI]

    On the Optimal On-Line Management of Photovoltaic-Hydrogen Hybrid Energy Systems. Enter the Article Password: If you forgot your password, select your ...

  14. Optimization Online - Enter Your Password to Continue

    E-Print Network [OSTI]

    Optimisation of physical and financial power purchase portfolios. Enter the Article Password: If you forgot your password, select your e-mail address:.

  15. Optimization Online - Enter Your Password to Continue

    E-Print Network [OSTI]

    Robust Unit Commitment Problem with Demand Response and Wind Energy. Enter the Article Password: If you forgot your password, select your e-mail address ...

  16. Optimization Online - Enter Your Password to Continue

    E-Print Network [OSTI]

    Update Entry. Optimization of Demand Response Through Peak Shaving. Enter the Article Password: If you forgot your password, select your e-mail address:.

  17. Optimization Online - Enter Your Password to Continue

    E-Print Network [OSTI]

    Topology Optimization for Magnetic Circuits dedicated to Electric Propulsion. Enter the Article Password: If you forgot your password, select your e-mail address:.

  18. Optimization Online - Enter Your Password to Continue

    E-Print Network [OSTI]

    Linear-quadratic control problem with a linear term on semiinfinite interval:theory and applications. Enter the Article Password: ... Search, Browse the Repository.

  19. Title: Author(s):

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield MunicipalTechnicalInformation FederatedInformationTITLE: AUTHOR(S)Patterns,(Journal A uttwr(s):

  20. Recirculating electric air filter

    DOE Patents [OSTI]

    Bergman, W.

    1985-01-09

    An electric air filter cartridge has a cylindrical inner high voltage electrode, a layer of filter material, and an outer ground electrode formed of a plurality of segments moveably connected together. The outer electrode can be easily opened to remove or insert filter material. Air flows through the two electrodes and the filter material and is exhausted from the center of the inner electrode.

  1. HEPA filter dissolution process

    DOE Patents [OSTI]

    Brewer, K.N.; Murphy, J.A.

    1994-02-22

    A process is described for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal. 4 figures.

  2. Hepa filter dissolution process

    DOE Patents [OSTI]

    Brewer, Ken N. (Arco, ID); Murphy, James A. (Idaho Falls, ID)

    1994-01-01

    A process for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal.

  3. Recirculating electric air filter

    DOE Patents [OSTI]

    Bergman, Werner (Pleasanton, CA)

    1986-01-01

    An electric air filter cartridge has a cylindrical inner high voltage eleode, a layer of filter material, and an outer ground electrode formed of a plurality of segments moveably connected together. The outer electrode can be easily opened to remove or insert filter material. Air flows through the two electrodes and the filter material and is exhausted from the center of the inner electrode.

  4. Fail save shut off valve for filtering systems employing candle filters

    DOE Patents [OSTI]

    VanOsdol, John (Fairmont, WV)

    2006-01-03

    The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

  5. Fail Save Shut Off Valve for Filtering Systems Employing Candle Filters

    DOE Patents [OSTI]

    VanOsdol, John

    2006-01-03

    The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

  6. Modeling Urban Storm-Water Quality Treatment: Model Development and Application to a Surface Sand Filter

    E-Print Network [OSTI]

    management; Urban areas; Hydraulic models; Sand, filter; Parameters; Estimation; Water treatment. Author and nutrient removal is often low. Water quality performance of the sand filter can be evaluated by comparing a surface sand filter. If the water quality attributes of the sand filter can be confidently mod- eled

  7. Visual Attention: Light Enters the Jochen Braun

    E-Print Network [OSTI]

    Braun, Jochen

    Visual Attention: Light Enters the Jungle Jochen Braun Recent studies focusing on basic visual-perceptual processing that awareness entails -- short-term memory, percep- tual decisions, voluntary responses and so time. The coaxing was done by a visual search near fixation, which the observer was obliged to carry

  8. enter part number BNC / RP-BNC

    E-Print Network [OSTI]

    Berns, Hans-Gerd

    enter part number Products 7/16 1.0/2.3 1.6/5.6 AFI AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini ------- Product Search ------- Inventory Search Search Results for: 31-10152-RFX Results: 1 - 1 of 1 Part Number. All rights reserved. Copyright | Terms & Conditions | RF E-Mail Client | Contact Us | Amphenol

  9. Rigid porous filter

    DOE Patents [OSTI]

    Chiang, Ta-Kuan (Morgantown, WV); Straub, Douglas L. (Morgantown, WV); Dennis, Richard A. (Morgantown, WV)

    2000-01-01

    The present invention involves a porous rigid filter including a plurality of concentric filtration elements having internal flow passages and forming external flow passages there between. The present invention also involves a pressure vessel containing the filter for the removal of particulates from high pressure particulate containing gases, and further involves a method for using the filter to remove such particulates. The present filter has the advantage of requiring fewer filter elements due to the high surface area-to-volume ratio provided by the filter, requires a reduced pressure vessel size, and exhibits enhanced mechanical design properties, improved cleaning properties, configuration options, modularity and ease of fabrication.

  10. Cordierite silicon nitride filters

    SciTech Connect (OSTI)

    Sawyer, J.; Buchan, B. ); Duiven, R.; Berger, M. ); Cleveland, J.; Ferri, J. )

    1992-02-01

    The objective of this project was to develop a silicon nitride based crossflow filter. This report summarizes the findings and results of the project. The project was phased with Phase I consisting of filter material development and crossflow filter design. Phase II involved filter manufacturing, filter testing under simulated conditions and reporting the results. In Phase I, Cordierite Silicon Nitride (CSN) was developed and tested for permeability and strength. Target values for each of these parameters were established early in the program. The values were met by the material development effort in Phase I. The crossflow filter design effort proceeded by developing a macroscopic design based on required surface area and estimated stresses. Then the thermal and pressure stresses were estimated using finite element analysis. In Phase II of this program, the filter manufacturing technique was developed, and the manufactured filters were tested. The technique developed involved press-bonding extruded tiles to form a filter, producing a monolithic filter after sintering. Filters manufactured using this technique were tested at Acurex and at the Westinghouse Science and Technology Center. The filters did not delaminate during testing and operated and high collection efficiency and good cleanability. Further development in areas of sintering and filter design is recommended.

  11. Filter type gas sampler with filter consolidation

    DOE Patents [OSTI]

    Miley, H.S.; Thompson, R.C.; Hubbard, C.W.; Perkins, R.W.

    1997-03-25

    Disclosed is an apparatus for automatically consolidating a filter or, more specifically, an apparatus for drawing a volume of gas through a plurality of sections of a filter, where after the sections are subsequently combined for the purpose of simultaneously interrogating the sections to detect the presence of a contaminant. 5 figs.

  12. https://doyouliveunited.org 1. Enter you user ID

    E-Print Network [OSTI]

    Search' button. 7. Enter you search terms for the agency of your choice and click on `Search'. #12;httpshttps://doyouliveunited.org 1. Enter you user ID: your email address Enter your password: welcome be different then the options listed here. 5. For a payroll pledge, enter the amount per pay or the total

  13. Filter service system

    DOE Patents [OSTI]

    Sellers, Cheryl L. (Peoria, IL); Nordyke, Daniel S. (Arlington Heights, IL); Crandell, Richard A. (Morton, IL); Tomlins, Gregory (Peoria, IL); Fei, Dong (Peoria, IL); Panov, Alexander (Dunlap, IL); Lane, William H. (Chillicothe, IL); Habeger, Craig F. (Chillicothe, IL)

    2008-12-09

    According to an exemplary embodiment of the present disclosure, a system for removing matter from a filtering device includes a gas pressurization assembly. An element of the assembly is removably attachable to a first orifice of the filtering device. The system also includes a vacuum source fluidly connected to a second orifice of the filtering device.

  14. Motor Fleet Request/Authorization Page 1 UNCW Travel System

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Motor Fleet Request/Authorization Page 1 UNCW Travel System Motor Fleet Request/Travel Authorization ENTER THE MOTOR FLEET REQUEST IN THE TRANSPORTATION SECTION OF THE TRAVEL AUTHORIZATION. PRESS CLICK TO ADD AND SELECT MOTOR FLEET FROM THE DROP-DOWN BOX. #12;Motor Fleet Request/Authorization Page 2

  15. Contactor/filter improvements

    DOE Patents [OSTI]

    Stelman, D.

    1988-06-30

    A contactor/filter arrangement for removing particulate contaminants from a gaseous stream is described. The filter includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. A cover screen isolates the filter element from contact with the moving granular bed. In one embodiment, the granular material is comprised of porous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses. 6 figs.

  16. Linear phase compressive filter

    DOE Patents [OSTI]

    McEwan, T.E.

    1995-06-06

    A phase linear filter for soliton suppression is in the form of a laddered series of stages of non-commensurate low pass filters with each low pass filter having a series coupled inductance (L) and a reverse biased, voltage dependent varactor diode, to ground which acts as a variable capacitance (C). L and C values are set to levels which correspond to a linear or conventional phase linear filter. Inductance is mapped directly from that of an equivalent nonlinear transmission line and capacitance is mapped from the linear case using a large signal equivalent of a nonlinear transmission line. 2 figs.

  17. Filter holder and gasket assembly for candle or tube filters

    DOE Patents [OSTI]

    Lippert, Thomas Edwin (Murrysville, PA); Alvin, Mary Anne (Pittsburgh, PA); Bruck, Gerald Joseph (Murrysville, PA); Smeltzer, Eugene E. (Export, PA)

    1999-03-02

    A filter holder and gasket assembly for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut.

  18. Sub-micron filter

    DOE Patents [OSTI]

    Tepper, Frederick (Sanford, FL); Kaledin, Leonid (Port Orange, FL)

    2009-10-13

    Aluminum hydroxide fibers approximately 2 nanometers in diameter and with surface areas ranging from 200 to 650 m.sup.2/g have been found to be highly electropositive. When dispersed in water they are able to attach to and retain electronegative particles. When combined into a composite filter with other fibers or particles they can filter bacteria and nano size particulates such as viruses and colloidal particles at high flux through the filter. Such filters can be used for purification and sterilization of water, biological, medical and pharmaceutical fluids, and as a collector/concentrator for detection and assay of microbes and viruses. The alumina fibers are also capable of filtering sub-micron inorganic and metallic particles to produce ultra pure water. The fibers are suitable as a substrate for growth of cells. Macromolecules such as proteins may be separated from each other based on their electronegative charges.

  19. Sintered composite filter

    DOE Patents [OSTI]

    Bergman, W.

    1986-05-02

    A particulate filter medium formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers is described. Preferred composition is about 40 vol.% quartz and about 60 vol.% stainless steel fibers. The media is sintered at about 1100/sup 0/C to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550/sup 0/C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  20. Multimedia Authoring III: Web Authoring

    E-Print Network [OSTI]

    Dahlquist, Kam D.

    Multimedia Authoring III: Web Authoring · Many multimedia applications today have a Web manifestation, whether it is the application itself or something about the application, like a DVD info Web site · The Web can "wrap" other types of content as well: Flash, audio, video · The Web provides technologies

  1. A filtered tabulated chemistry model for LES of premixed combustion

    SciTech Connect (OSTI)

    Fiorina, B.; Auzillon, P.; Darabiha, N.; Gicquel, O.; Veynante, D. [EM2C - CNRS, Ecole Centrale Paris, 92295 Chatenay Malabry (France); Vicquelin, R. [EM2C - CNRS, Ecole Centrale Paris, 92295 Chatenay Malabry (France); GDF SUEZ, Pole CHENE, Centre de Recherche et d'Innovation Gaz et Energies Nouvelles, 93211 Saint-Denis la Plaine (France)

    2010-03-15

    A new modeling strategy called F-TACLES (Filtered Tabulated Chemistry for Large Eddy Simulation) is developed to introduce tabulated chemistry methods in Large Eddy Simulation (LES) of turbulent premixed combustion. The objective is to recover the correct laminar flame propagation speed of the filtered flame front when subgrid scale turbulence vanishes as LES should tend toward Direct Numerical Simulation (DNS). The filtered flame structure is mapped using 1-D filtered laminar premixed flames. Closure of the filtered progress variable and the energy balance equations are carefully addressed in a fully compressible formulation. The methodology is first applied to 1-D filtered laminar flames, showing the ability of the model to recover the laminar flame speed and the correct chemical structure when the flame wrinkling is completely resolved. The model is then extended to turbulent combustion regimes by including subgrid scale wrinkling effects in the flame front propagation. Finally, preliminary tests of LES in a 3-D turbulent premixed flame are performed. (author)

  2. Ceramic fiber reinforced filter

    DOE Patents [OSTI]

    Stinton, David P. (Knoxville, TN); McLaughlin, Jerry C. (Oak Ridge, TN); Lowden, Richard A. (Powell, TN)

    1991-01-01

    A filter for removing particulate matter from high temperature flowing fluids, and in particular gases, that is reinforced with ceramic fibers. The filter has a ceramic base fiber material in the form of a fabric, felt, paper of the like, with the refractory fibers thereof coated with a thin layer of a protective and bonding refractory applied by chemical vapor deposition techniques. This coating causes each fiber to be physically joined to adjoining fibers so as to prevent movement of the fibers during use and to increase the strength and toughness of the composite filter. Further, the coating can be selected to minimize any reactions between the constituents of the fluids and the fibers. A description is given of the formation of a composite filter using a felt preform of commercial silicon carbide fibers together with the coating of these fibers with pure silicon carbide. Filter efficiency approaching 100% has been demonstrated with these filters. The fiber base material is alternately made from aluminosilicate fibers, zirconia fibers and alumina fibers. Coating with Al.sub.2 O.sub.3 is also described. Advanced configurations for the composite filter are suggested.

  3. Remotely serviced filter and housing

    DOE Patents [OSTI]

    Ross, Maurice J. (Pocatello, ID); Zaladonis, Larry A. (Idaho Falls, ID)

    1988-09-27

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge using an overhead crane. The filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station.

  4. Differential Filtering and Detexturing 

    E-Print Network [OSTI]

    He, Lei

    2014-08-18

    introduce how to use bilateral filter appropriately on image texture removal by modifying its range image. While current existing methods either fail to remove the textures completely or over blur main structures, our method delivers best-in-class image...

  5. Contactor/filter improvements

    DOE Patents [OSTI]

    Stelman, David (West Hills, CA)

    1989-01-01

    A contactor/filter arrangement for removing particulate contaminants from a gaseous stream includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. The housing further includes a gas inlet means, a gas outlet means, and means for moving a body of granular material through the zone. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. Disposed on the upstream face of the filter element is a cover screen which isolates the filter element from contact with the moving granular bed and collects a portion of the particulates so as to form a dust cake having openings small enough to exclude the granular material, yet large enough to receive the dust particles. In one embodiment, the granular material is comprised of prous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses.

  6. Anti-clogging filter system

    DOE Patents [OSTI]

    Brown, Erik P.

    2015-05-19

    An anti-clogging filter system for filtering a fluid containing large particles and small particles includes an enclosure with at least one individual elongated tubular filter element in the enclosure. The individual elongated tubular filter element has an internal passage, a closed end, an open end, and a filtering material in or on the individual elongated tubular filter element. The fluid travels through the open end of the elongated tubular element and through the internal passage and through the filtering material. An anti-clogging element is positioned on or adjacent the individual elongated tubular filter element and provides a fluid curtain that preferentially directs the larger particulates to one area of the filter material allowing the remainder of the filter material to remain more efficient.

  7. Filters for cathodic arc plasmas

    DOE Patents [OSTI]

    Anders, Andre (Albany, CA); MacGill, Robert A. (Richmond, CA); Bilek, Marcela M. M. (Engadine, AU); Brown, Ian G. (Berkeley, CA)

    2002-01-01

    Cathodic arc plasmas are contaminated with macroparticles. A variety of magnetic plasma filters has been used with various success in removing the macroparticles from the plasma. An open-architecture, bent solenoid filter, with additional field coils at the filter entrance and exit, improves macroparticle filtering. In particular, a double-bent filter that is twisted out of plane forms a very compact and efficient filter. The coil turns further have a flat cross-section to promote macroparticle reflection out of the filter volume. An output conditioning system formed of an expander coil, a straightener coil, and a homogenizer, may be used with the magnetic filter for expanding the filtered plasma beam to cover a larger area of the target. A cathodic arc plasma deposition system using this filter can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

  8. Remotely serviced filter and housing

    DOE Patents [OSTI]

    Ross, M.J.; Zaladonis, L.A.

    1987-07-22

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station. 6 figs.

  9. Linear Filtering and Decimation & Expansion

    E-Print Network [OSTI]

    Fowler, Mark

    decimating Pre-filter w/ M-Band D-T LPF (i.e. a D-T anti-alias filter) /M-/M M Filter & Decimate ][nx ][^ nx (an "anti-image" filter) - /3-/3 n - /3-/3 n /L-/L L Expand & Filter ][nx - )(f X n L=3 Looks Just ][nx ][^ nx ][^ )( nx M -= i inhixnx ][][][^ -== i M inMhixnMxnx ][][][^][^ )( #12;6/6 Time

  10. FACT SHEET for Licensed Practical Nurses Entering NEPS

    E-Print Network [OSTI]

    Saskatchewan, University of

    1 of 2 FACT SHEET for Licensed Practical Nurses Entering NEPS Frequently Asked Questions: 1. I am a Licensed Practical Nurse (LPN) interested in entering the Nursing Education Program of Saskatchewan (NEPS). What are the NEPS entrance requirements for LPNs? Licensed Practical Nurses currently registered

  11. Enter Search Term Enter Drill Deeper or ED Online ID Home Subscribe Back Issues Design FAQs Ideas for Design Power Analog

    E-Print Network [OSTI]

    Rogers, John A.

    Enter Search Term Enter Drill Deeper or ED Online ID Home Subscribe Back Issues Design FAQs Ideas Subscribe to Electronic Design UPDATE (Archive) Email: Enter Email Click to view this week's welcome screen

  12. Stack filter classifiers

    SciTech Connect (OSTI)

    Porter, Reid B; Hush, Don

    2009-01-01

    Just as linear models generalize the sample mean and weighted average, weighted order statistic models generalize the sample median and weighted median. This analogy can be continued informally to generalized additive modeels in the case of the mean, and Stack Filters in the case of the median. Both of these model classes have been extensively studied for signal and image processing but it is surprising to find that for pattern classification, their treatment has been significantly one sided. Generalized additive models are now a major tool in pattern classification and many different learning algorithms have been developed to fit model parameters to finite data. However Stack Filters remain largely confined to signal and image processing and learning algorithms for classification are yet to be seen. This paper is a step towards Stack Filter Classifiers and it shows that the approach is interesting from both a theoretical and a practical perspective.

  13. Author Select

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield MunicipalTechnical Report:Speeding accessby a contractor ofvarDOE PAGES11 PPPL-AtmosphericAuthor

  14. A Local Convergence Theory of a Filter Line Search Method for ...

    E-Print Network [OSTI]

    In this paper the theory of local convergence for a class of line search filter type ..... As for proving global convergence, we use the terminology first introduced in ... We do this by exiting the algorithm temporarily and enter into a feasibility.

  15. Filter assembly for metallic and intermetallic tube filters

    DOE Patents [OSTI]

    Alvin, Mary Anne (113 Lehr Ave., Pittsburgh, PA 15223); Lippert, Thomas E. (3205 Cambridge Rd., Murrysville, PA 15668); Bruck, Gerald J. (4469 Sardis Rd., Murrysville, PA 15668); Smeltzer, Eugene E. (R.D. 7, Box 267-I, Italy Rd., Export, PA 15632-9621)

    2001-01-01

    A filter assembly (60) for holding a filter element (28) within a hot gas cleanup system pressure vessel is provided, containing: a filter housing (62), said filter housing having a certain axial length and having a peripheral sidewall, said sidewall defining an interior chamber (66); a one piece, all metal, fail-safe/regenerator device (68) within the interior chamber (66) of the filter housing (62) and/or extending beyond the axial length of the filter housing, said device containing an outward extending radial flange (71) within the filter housing for seating an essential seal (70), the device also having heat transfer media (72) disposed inside and screens (80) for particulate removal; one compliant gasket (70) positioned next to and above the outward extending radial flange of the fail-safe/regenerator device; and a porous metallic corrosion resistant superalloy type filter element body welded at the bottom of the metal fail-safe/regenerator device.

  16. Ozone decomposing filter

    DOE Patents [OSTI]

    Simandl, Ronald F. (Farragut, TN); Brown, John D. (Harriman, TN); Whinnery, Jr., LeRoy L. (Dublin, CA)

    1999-01-01

    In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

  17. Ceramic HEPA Filter Program

    SciTech Connect (OSTI)

    Mitchell, M A; Bergman, W; Haslam, J; Brown, E P; Sawyer, S; Beaulieu, R; Althouse, P; Meike, A

    2012-04-30

    Potential benefits of ceramic filters in nuclear facilities: (1) Short term benefit for DOE, NRC, and industry - (a) CalPoly HTTU provides unique testing capability to answer questions for DOE - High temperature testing of materials, components, filter, (b) Several DNFSB correspondences and presentations by DNFSB members have highlighted the need for HEPA filter R and D - DNFSB Recommendation 2009-2 highlighted a nuclear facility response to an evaluation basis earthquake followed by a fire (aka shake-n-bake) and CalPoly has capability for a shake-n-bake test; (2) Intermediate term benefit for DOE and industry - (a) Filtration for specialty applications, e.g., explosive applications at Nevada, (b) Spin-off technologies applicable to other commercial industries; and (3) Long term benefit for DOE, NRC, and industry - (a) Across industry, strong desire for better performance filter, (b) Engineering solution to safety problem will improve facility safety and decrease dependence on associated support systems, (c) Large potential life-cycle cost savings, and (d) Facilitates development and deployment of LLNL process innovations to allow continuous ventilation system operation during a fire.

  18. Web Content Filtering 1 User Guidelines Web content filter guidelines

    E-Print Network [OSTI]

    Swain, Peter

    Web Content Filtering 1 User Guidelines Web content filter guidelines Introduction The basic criterion for blocking a Web page Categories of material which will be blocked Requesting the unblocking of Aberdeen applies a Web Content Filtering service to all web pages accessed from the undergraduate network

  19. Textbook Adoption Application Guide Entering the Application ..................................................................................... 2

    E-Print Network [OSTI]

    Sura, Philip

    allows you to search for your assigned course(s) by: Term, Location, Academic Department, Course NumberTextbook Adoption Application Guide Entering the Application ............................................................................................................ 3 Search with Academic Criteria

  20. Quick-change filter cartridge

    DOE Patents [OSTI]

    Rodgers, John C. (Santa Fe, NM); McFarland, Andrew R. (College Station, TX); Ortiz, Carlos A. (Bryan, TX)

    1995-01-01

    A quick-change filter cartridge. In sampling systems for measurement of airborne materials, a filter element is introduced into the sampled airstream such that the aerosol constituents are removed and deposited on the filter. Fragile sampling media often require support in order to prevent rupture during sampling, and careful mounting and sealing to prevent misalignment, tearing, or creasing which would allow the sampled air to bypass the filter. Additionally, handling of filter elements may introduce cross-contamination or exposure of operators to toxic materials. Moreover, it is desirable to enable the preloading of filter media into quick-change cartridges in clean laboratory environments, thereby simplifying and expediting the filter-changing process in the field. The quick-change filter cartridge of the present invention permits the application of a variety of filter media in many types of instruments and may also be used in automated systems. The cartridge includes a base through which a vacuum can be applied to draw air through the filter medium which is located on a porous filter support and held there by means of a cap which forms an airtight seal with the base. The base is also adapted for receiving absorbing media so that both particulates and gas-phase samples may be trapped for investigation, the latter downstream of the aerosol filter.

  1. Variable Speed Wind Turbine Generator with Zero-sequence Filter

    DOE Patents [OSTI]

    Muljadi, Eduard (Golden, CO)

    1998-08-25

    A variable speed wind turbine generator system to convert mechanical power into electrical power or energy and to recover the electrical power or energy in the form of three phase alternating current and return the power or energy to a utility or other load with single phase sinusoidal waveform at sixty (60) hertz and unity power factor includes an excitation controller for generating three phase commanded current, a generator, and a zero sequence filter. Each commanded current signal includes two components: a positive sequence variable frequency current signal to provide the balanced three phase excitation currents required in the stator windings of the generator to generate the rotating magnetic field needed to recover an optimum level of real power from the generator; and a zero frequency sixty (60) hertz current signal to allow the real power generated by the generator to be supplied to the utility. The positive sequence current signals are balanced three phase signals and are prevented from entering the utility by the zero sequence filter. The zero sequence current signals have zero phase displacement from each other and are prevented from entering the generator by the star connected stator windings. The zero sequence filter allows the zero sequence current signals to pass through to deliver power to the utility.

  2. Variable speed wind turbine generator with zero-sequence filter

    DOE Patents [OSTI]

    Muljadi, Eduard (Golden, CO)

    1998-01-01

    A variable speed wind turbine generator system to convert mechanical power into electrical power or energy and to recover the electrical power or energy in the form of three phase alternating current and return the power or energy to a utility or other load with single phase sinusoidal waveform at sixty (60) hertz and unity power factor includes an excitation controller for generating three phase commanded current, a generator, and a zero sequence filter. Each commanded current signal includes two components: a positive sequence variable frequency current signal to provide the balanced three phase excitation currents required in the stator windings of the generator to generate the rotating magnetic field needed to recover an optimum level of real power from the generator; and a zero frequency sixty (60) hertz current signal to allow the real power generated by the generator to be supplied to the utility. The positive sequence current signals are balanced three phase signals and are prevented from entering the utility by the zero sequence filter. The zero sequence current signals have zero phase displacement from each other and are prevented from entering the generator by the star connected stator windings. The zero sequence filter allows the zero sequence current signals to pass through to deliver power to the utility.

  3. Variable speed wind turbine generator with zero-sequence filter

    DOE Patents [OSTI]

    Muljadi, E.

    1998-08-25

    A variable speed wind turbine generator system to convert mechanical power into electrical power or energy and to recover the electrical power or energy in the form of three phase alternating current and return the power or energy to a utility or other load with single phase sinusoidal waveform at sixty (60) hertz and unity power factor includes an excitation controller for generating three phase commanded current, a generator, and a zero sequence filter. Each commanded current signal includes two components: a positive sequence variable frequency current signal to provide the balanced three phase excitation currents required in the stator windings of the generator to generate the rotating magnetic field needed to recover an optimum level of real power from the generator; and a zero frequency sixty (60) hertz current signal to allow the real power generated by the generator to be supplied to the utility. The positive sequence current signals are balanced three phase signals and are prevented from entering the utility by the zero sequence filter. The zero sequence current signals have zero phase displacement from each other and are prevented from entering the generator by the star connected stator windings. The zero sequence filter allows the zero sequence current signals to pass through to deliver power to the utility. 14 figs.

  4. Siphon filter assessment for Northern Ghana

    E-Print Network [OSTI]

    Ziff, Sara Elizabeth

    2009-01-01

    The siphon filter is a household water filter developed by the Basic Water Needs Foundation based on the design of ceramic candle filters. The siphon filter is marketed under brand names CrystalPur and Tulip and is sold ...

  5. Electrically-Assisted Diesel Particulate Filter Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Substrate Studies of an Electrically-Assisted Diesel Particulate Filter Electrically-Assisted Diesel Particulate Filter Regeneration...

  6. CLEERS Activities: Diesel Soot Filter Characterization & NOx...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Activities: Diesel Soot Filter Characterization & NOx Control Fundamentals CLEERS Activities: Diesel Soot Filter Characterization & NOx Control Fundamentals 2009 DOE Hydrogen...

  7. Advanced Particulate Filter Technologies for Direct Injection...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Particulate Filter Technologies for Direct Injection Gasoline Engine Applications Advanced Particulate Filter Technologies for Direct Injection Gasoline Engine Applications...

  8. Filtered cathodic arc source

    DOE Patents [OSTI]

    Falabella, S.; Sanders, D.M.

    1994-01-18

    A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge is described. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45[degree] to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles. 3 figures.

  9. Drilling fluid filter

    DOE Patents [OSTI]

    Hall, David R.; Fox, Joe; Garner, Kory

    2007-01-23

    A drilling fluid filter for placement within a bore wall of a tubular drill string component comprises a perforated receptacle with an open end and a closed end. A hanger for engagement with the bore wall is mounted at the open end of the perforated receptacle. A mandrel is adjacent and attached to the open end of the perforated receptacle. A linkage connects the mandrel to the hanger. The linkage may be selected from the group consisting of struts, articulated struts and cams. The mandrel operates on the hanger through the linkage to engage and disengage the drilling fluid filter from the tubular drill string component. The mandrel may have a stationary portion comprising a first attachment to the open end of the perforated receptacle and a telescoping adjustable portion comprising a second attachment to the linkage. The mandrel may also comprise a top-hole interface for top-hole equipment.

  10. Regenerable particulate filter

    DOE Patents [OSTI]

    Stuecker, John N. (Albuquerque, NM); Cesarano, III, Joseph (Albuquerque, NM); Miller, James E. (Albuquerque, NM)

    2009-05-05

    A method of making a three-dimensional lattice structure, such as a filter used to remove particulates from a gas stream, where the physical lattice structure is designed utilizing software simulation from pre-defined mass transfer and flow characteristics and the designed lattice structure is fabricated using a free-form fabrication manufacturing technique, where the periodic lattice structure is comprised of individual geometric elements.

  11. EVALUATION OF ALTERNATIVE FILTER MEDIA FOR THE ROTARY MICROFILTER

    SciTech Connect (OSTI)

    Poirier, M.; Herman, D.; Bhave, R.

    2011-09-13

    SRS is currently developing and testing several processes to treat high level radioactive liquid waste. These processes include the Integrated Salt Disposition Process (ISDP), the Salt Waste Processing Facility (SWPF), and the Small Column Ion Exchange Process (SCIX). Each of these processes has a solid-liquid separation process that limits its throughput. SRNL researchers identified and tested the rotary microfilter as a technology to increase solid-liquid separation throughput. The testing showed significant improvement in filter flux with the rotary microfilter over the baseline crossflow filter (i.e., 2.5-6.5X during scoping tests, as much as 10X in actual waste tests, and approximately 3X in pilot-scale tests). SRNL received funding from DOE EM-21, and subsequently DOE EM-31 to develop the rotary microfilter for high level radioactive service. The work has included upgrading the rotary microfilter for radioactive service, testing with simulated SRS waste streams, and testing it with simulated Hanford waste streams. While the filtration rate is better than that obtained during testing of crossflow filters, the authors believe the rotary microfilter throughput can be improved by using a better filter membrane. The rotary microfilter membrane is made of stainless steel (Pall PMM050). Previous testing, funded by DOE EM-21, showed that asymmetric filters composed of a ceramic membrane on top of a stainless steel support produced higher filter flux than 100% stainless steel symmetric filters in crossflow filter tests. In that testing, the Pall Accusep and Graver filters produced 13-21% larger filter flux than the baseline 0.1 {micro}m Mott filter. While the improvement in flux is not as dramatic as the improvement of the rotary filter over a crossflow filter, a 13-21% increase could reduce the lifetime of a 30 year process by 4-6 years, with significant cost savings. Subsequent rotary filter testing showed the Pall PMM050 stainless steel filter membrane produced higher flux than the Mott filter media in bench-scale and pilot-scale testing. The Accusep and Graver filter media were not evaluated in that testing, because they are not available as flat sheets. The Accusep filter was developed at ORNL and licensed to Pall Corporation. This filter has a stainless steel support structure with a zirconium oxide ceramic membrane. The pore size is 0.1 {micro}m absolute. The Graver filter has a stainless steel support structure with a titanium dioxide ceramic membrane. The pore size is 0.07 {micro}m absolute. SRNL and ORNL are working together to develop filter media similar to the Accusep and Graver media, and to test them in a bench-scale filtration apparatus to attempt to improve the throughput of the rotary microfilter. This report describes the effort.

  12. Filter Press Building 

    E-Print Network [OSTI]

    Bush, W. M.

    1986-01-01

    -of-the-art installations in the United States. The new facility, as part of a modern water pollution contiol center, offered a unique oppor tunity for a total state-of-the-art energy system. Heat recovery from treated wastewater for space heating would be the major... containing vast reservoirs of heat energy. CONCEPT OF HEAT RECOVERY The concept of a heat recovery system for the Filter Press Building was not only practical, but exciting. It was estimated the Avon Lake waste water treatment effluent had an energy...

  13. Sampled data lattice filters 

    E-Print Network [OSTI]

    Thrift, William Terry

    1980-01-01

    Lattice Filters (December 1979) William Terry Thrift III, B. S. , Texas A&M University Chairman of Advisory Committee: Dr. P. E. Allen The thesis studies the sensitivity properties of a 2nd order z-domain lattice structure as they apply to analog.... In the indirect method an s-domain transfer function is first converted to an s-domain signal flowgraph. Next the flowgraph is implemented by continuous circuits. The continuous circuits are then approximated with discrete time circuits which consist...

  14. A macroscale model for simulating pressure drop and collection efficiency of pleated filters over time

    E-Print Network [OSTI]

    Tafreshi, Hooman Vahedi

    time. To the knowledge of the authors, there are no criteria for designing pleat shape and pleat count time S. Fotovati a , H. Vahedi Tafreshi a, , B. Pourdeyhimi b a Department of Mechanical and Nuclear geometry. The general consensus in designing pleated fibrous filters in industry is that a filter

  15. Coated x-ray filters

    DOE Patents [OSTI]

    Steinmeyer, P.A.

    1992-11-24

    A radiation filter for filtering radiation beams of wavelengths within a preselected range of wavelengths comprises a radiation transmissive substrate and an attenuating layer deposited on the substrate. The attenuating layer may be deposited by a sputtering process or a vacuum process. Beryllium may be used as the radiation transmissive substrate. In addition, a second radiation filter comprises an attenuating layer interposed between a pair of radiation transmissive layers. 4 figs.

  16. Coated x-ray filters

    DOE Patents [OSTI]

    Steinmeyer, Peter A. (Farmington, NM)

    1992-11-24

    A radiation filter for filtering radiation beams of wavelengths within a preselected range of wavelengths comprises a radiation transmissive substrate and an attenuating layer deposited on the substrate. The attenuating layer may be deposited by a sputtering process or a vacuum process. Beryllium may be used as the radiation transmissive substrate. In addition, a second radiation filter comprises an attenuating layer interposed between a pair of radiation transmissive layers.

  17. American Institute of Aeronautics and Astronautics Disturbance Filtering and Identification on the Naval

    E-Print Network [OSTI]

    1 American Institute of Aeronautics and Astronautics Disturbance Filtering and Identification and Aeronautical Engineering, University of California, Davis Corresponding Author, Professor Sanjay S. Joshi, Department of Mechanical and Aeronautical Engineering, University of California, Davis, Bainer Hall, 1

  18. BACTERIA-FILTERS: PERSISTENT PARTICLE FILTERS FOR BACKGROUND SUBTRACTION

    E-Print Network [OSTI]

    Peleg, Shmuel

    BACTERIA-FILTERS: PERSISTENT PARTICLE FILTERS FOR BACKGROUND SUBTRACTION Yair Movshovitz switch of bacteria between two states: A normal growing cell and a dormant but persistent cell after the stress is over, bacterial growth continues. Similar to bacteria, particles will switch between

  19. BIOCHEMISTRY (for students entering Biology in Fall 2011 or later)

    E-Print Network [OSTI]

    Jiang, Wen

    1 BIOCHEMISTRY (for students entering Biology in Fall 2011 or later) Graduation Requirements Requirement: Choose one of these four options: (Biochemistry majors must choose BIOL 39500, Macromolecules) A Biochemistry (3 cr.; fall) 13. Biology Electives: Two of these courses: A. BIOL 41600 Viruses and Viral

  20. BIOCHEMISTRY (for students entering Biology in Fall 2010 or later)

    E-Print Network [OSTI]

    Jiang, Wen

    BIOCHEMISTRY (for students entering Biology in Fall 2010 or later) Graduation Requirements, Intro. To Evolution & Ecology (2 cr.; fall) 9. One of these four options: (Biochemistry majors must & Measurement in Physical Biochemistry (3 cr.; fall) 13. Two of these courses: A. BIOL 41600 Viruses and Viral

  1. 1 Filter_Supplemental-Info_090913.doc Supplemental Information Regarding RF/Microwave Filter Design

    E-Print Network [OSTI]

    Weller/USF 1 Filter_Supplemental-Info_090913.doc Supplemental Information Regarding RF/Microwave Filter Design The video module on RF/microwave filter design, Filter Demonstration in Microwave Office

  2. Sintered composite medium and filter

    DOE Patents [OSTI]

    Bergman, Werner (Pleasanton, CA)

    1987-01-01

    A particulate filter medium is formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers. A preferred composition is about 40 vol. % quartz and about 60 vol. % stainless steel fibers. The media is sintered at about 1100.degree. C. to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550.degree. C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  3. Entering a Student's Committee Chair Note: While these instructions tell you how to enter a committee chair, this document refers to that

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    record. · · Enter term student was admitted using year and term number with no spaces. (IE: 201450's SGAADVR screen. · Enter the term date and hit Control + Page Down to get to the "Advisor Information;· Hit the "ID" button. The search screen appears like this: · Enter advisor's name (You can only seach

  4. of the filter were measured using condensation particle counters (TSI Inc. model 3022A). Submicrometer particles entering the counters are

    E-Print Network [OSTI]

    Gruner, George

    . CO2 sensors are currently used to monitor indoor air quality, and in capnographyÐthe measurement, or removal of carbon dioxide. Therefore, the sensing of CO2 is important in a broad variety of applications of CO2 in respiration dur- ing medical procedures. For these applications, the current technology

  5. Doing data regression in the TI-85 Entering the data

    E-Print Network [OSTI]

    Torres, Rodolfo

    of the data.DRAW Press to get a plot of the latest regression computed. To forecast or compute a value Press the range (press ) according to the data entered.WIND Press and then in the STAT menu.PLOT Select .Plot1 and then after in the menu.) STAT VARS To forecast or compute a value Press in the menu (you may need to press

  6. Diesel Particulate Filters: Market Introducution in Europe |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filters: Market Introducution in Europe Diesel Particulate Filters: Market Introducution in Europe 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: Aaqius and...

  7. Catalytic Filter for Diesel Exhaust Purification | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalytic Filter for Diesel Exhaust Purification Catalytic Filter for Diesel Exhaust Purification This project is developing a precious metal-free passive diesel particulate...

  8. Pleated Ceramic Fiber Diesel Particulate Filter | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pleated Ceramic Fiber Diesel Particulate Filter Pleated Ceramic Fiber Diesel Particulate Filter 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters...

  9. Web of Science provides access to multidisciplinary, high quality research information and allows you to track cited authors, articles as well as articles arranged by subjects.

    E-Print Network [OSTI]

    California at Los Angeles, University of

    , address, language, and document type. 11. Click the "Search" option to begin a basic search. 22. Enter your search terms here. 33. Use the drop down menus to select which type of search(es) you wish to perform. 44. When searching for an author, use the author's last name and initials. Enter Wilson S

  10. Spin Filtering in Storage Rings

    E-Print Network [OSTI]

    N. N. Nikolaev; F. F. Pavlov

    2005-12-05

    The spin filtering in storage rings is based on the multiple passage of a stored beam through a polarized internal gas target. Apart from the polarization by transmission, a unique geometrical feature of interaction with the target in such a filtering process, pointed out by H.O. Meyer \\cite{Meyer}, is a scattering of stored particles within the beam. A rotation of the spin in the scattering process affects the polarization buildup. We derive here a quantum-mechanical evolution equation for the spin-density matrix of the stored beam which incorporates scattering within the beam. We show how the interplay of transmission and scattering with the beam changes from polarized electrons to polarized protons in the atomic target. After discussions of the FILTEX results on the filtering of stored protons \\cite{FILTEX}, we comment on the strategy of spin filtering of antiprotons for the PAX experiment at GSI FAIR \\cite{PAX-TP}.

  11. Water washable stainless steel HEPA filter

    DOE Patents [OSTI]

    Phillips, Terrance D. (617 Chestnut Ct., Aiken, SC 29803)

    2001-01-01

    The invention is a high efficiency particulate (HEPA) filter apparatus and system, and method for assaying particulates. The HEPA filter provides for capture of 99.99% or greater of particulates from a gas stream, with collection of particulates on the surface of the filter media. The invention provides a filter system that can be cleaned and regenerated in situ.

  12. Filter!Demonstration Microwave!Office

    E-Print Network [OSTI]

    Filter!Demonstration in Microwave!Office muse #12;Objectives · Demonstrate!project!setup!in!Microwave

  13. NPT Enters Into Force | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal of HonorPoster Session | NationalhitsStewardshipdoes itEnters

  14. Protected page - Enter Password | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) by Carbon-Rich MatricesstudentsProjectsProperty -Protected page - Enter

  15. Prairie Island Nuclear Station Spent Filter Processing for Direct Disposal - 12333

    SciTech Connect (OSTI)

    Anderson, H. Michael [WMG, Inc., 16 Bank Street, Peekskill, NY 10566 (United States)

    2012-07-01

    This paper will discuss WMG's filter processing experience within the commercial nuclear power industry, specifically recent experience processing high activity spent filters generated by Xcel Energy's Prairie Island Nuclear Station (Prairie Island), located in Welch, MN. WMG processed for disposal eighty-four 55-gallon drums filled with varying types of high activity spent filters. The scope of work involved characterization, packaging plan development, transport to the WMG's Off-Site Processing location, shredding the filter contents of each drum, cement solidifying the shredded filter material, and finally shipping the solidified container of shredded filter material to Clive, Utah where the container was presented to EnergySolutions Disposal site for disposal in their Containerised Waste Facility. This sequence of events presented in this paper took place a total of nine (9) times over a period of four weeks. All 1294 filters were successfully solidified into nine (9) -WMG 142 steel liners, and each was successfully disposed of as Class A Waste at EnergySolutions Disposal Site in Clive, Utah. Prairie Island's waste material was unique in that all its filters were packaged in 55-gallon drums; and since the station packaged its filters in drums it was much easier to develop packaging plans for such a large volume of legacy filters. For this author, having over 20-years of waste management experiences, storing and shipping waste material in 55-gallon drums is not immediately thought of as a highly efficient method of managing its waste material. However, Prairie Island's use of 55-gallon drums to store and package its filters provided a significant advantage. Drums could be mixed and matched to provide the most efficient processing method while still meeting the Waste Class A limits required for disposal. (author)

  16. Spatial filters for high power lasers

    DOE Patents [OSTI]

    Erlandson, Alvin Charles; Bayramian, Andrew James

    2014-12-02

    A spatial filter includes a first filter element and a second filter element overlapping with the first filter element. The first filter element includes a first pair of cylindrical lenses separated by a first distance. Each of the first pair of cylindrical lenses has a first focal length. The first filter element also includes a first longitudinal slit filter positioned between the first pair of cylindrical lenses. The second filter element includes a second pair of cylindrical lenses separated by a second distance. Each of the second pair of cylindrical lenses has a second focal length. The second filter element also includes a second longitudinal slit filter positioned between the second pair of cylindrical lenses.

  17. Job Salary Prediction Anonymous Author(s)

    E-Print Network [OSTI]

    Freitas, Nando de

    050 051 052 053 Job Salary Prediction Anonymous Author(s) Affiliation Address email Abstract Kaggle based classifieds company, hosted a Kaggle competition with the goal of improving job salary pre- dictions for job postings in which the salary does not appear. Using various lin- ear models, random

  18. Performance Evaluation of Axial Flow AG-1 FC and Prototype FM (High Strength) HEPA Filters - 13123

    SciTech Connect (OSTI)

    Giffin, Paxton K.; Parsons, Michael S.; Wilson, John A.; Waggoner, Charles A. [Institute for Clean Energy Technology, Mississippi State University, 205 Research Blvd Starkville, MS 39759 (United States)] [Institute for Clean Energy Technology, Mississippi State University, 205 Research Blvd Starkville, MS 39759 (United States)

    2013-07-01

    High efficiency particulate air (HEPA) filters are routinely used in DOE nuclear containment activities. The Nuclear Air Cleaning Handbook (NACH) stipulates that air cleaning devices and equipment used in DOE nuclear applications must meet the American Society of Mechanical Engineers (ASME) Code on Nuclear Air and Gas Treatment (AG-1) standard. This testing activity evaluates two different axial flow HEPA filters, those from AG-1 Sections FC and FM. Section FM is under development and has not yet been added to AG-1 due to a lack of qualification data available for these filters. Section FC filters are axial flow units that utilize a fibrous glass filtering medium. The section FM filters utilize a similar fibrous glass medium, but also have scrim backing. The scrim-backed filters have demonstrated the ability to endure pressure impulses capable of completely destroying FC filters. The testing activities presented herein will examine the total lifetime loading for both FC and FM filters under ambient conditions and at elevated conditions of temperature and relative humidity. Results will include loading curves, penetration curves, and testing condition parameters. These testing activities have been developed through collaborations with representatives from the National Nuclear Security Administration (NNSA), DOE Office of Environmental Management (DOE-EM), New Mexico State University, and Mississippi State University. (authors)

  19. Entering a New Stage of Learning from the U.S. Fuel Cell Electric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Entering a New Stage of Learning from the U.S. Fuel Cell Electric Vehicle Demonstration Project: Preprint Entering a New Stage of Learning from the U.S. Fuel Cell Electric Vehicle...

  20. Filter systems for IGCC applications

    SciTech Connect (OSTI)

    Bevan, S.; Gieger, R.; Sobel, N.; Johnson, D.

    1995-11-01

    The objectives of this program were to identify metallic filter medium to be utilized in the Integrated Gasification Combined Cycle process (IGCC). In IGCC processes utilizing high efficiency desulfurizing technology, the traditional corrosion attack, sulfidation, is minimized so that metallic filters are viable alternatives over ceramic filters. Tampa Electric Company`s Polk Power Station is being developed to demonstrate Integrated Gasification Combined Cycle technology. The Pall Gas Solid Separation (GSS) System is a self cleaning filtration system designed to remove virtually all particulate matter from gas streams. The heart of the system is the filter medium used to collect the particles on the filter surface. The medium`s filtration efficiency, uniformity, permeability, voids volume, and surface characteristics are all important to establishing a permeable permanent cake. In-house laboratory blowback tests, using representative full scale system particulate, were used to confirm the medium selection for this project. Test elements constructed from six alloys were supplied for exposure tests: PSS 310SC (modified 310S alloy); PSS 310SC heat treated; PSS 310SC-high Cr; PSS 310SC-high Cr heat treated; PSS Hastelloy X; and PSS Hastelloy X heat treated.

  1. 58 VOLUME 115 | NUMBER 1 | January 2007 Environmental Health Perspectives Enteric illness associated with microbial

    E-Print Network [OSTI]

    Mazumder, Asit

    - ing the long-term patterns of enteric illnesses in a given population or community are yet to be fully in source water reservoirs to enteric ill- ness using data for the city of Vancouver. PME-MAST was searched58 VOLUME 115 | NUMBER 1 | January 2007 · Environmental Health Perspectives Research Enteric

  2. EVALUATION OF UPFLOW FILTERS FOREVALUATION OF UPFLOW FILTERS FOR STORMWATER TREATMENT AT CRITICALSTORMWATER TREATMENT AT CRITICAL

    E-Print Network [OSTI]

    Clark, Shirley E.

    .brakes, etc. Infiltration Devices: Subsurface Infiltration Trenches,Infiltration Devices: Subsurface Infiltration Trenches, Surface Percolation Areas, Porous Pavement, Grass Filters,Surface Percolation Areas filters.downflow filters. OBJECTIVES OF THE STUDYOBJECTIVES OF THE STUDY Primary:Primary: Optimize

  3. Centrifugal Filter Devices Centricon centrifugal filter devices with 10,000 NMWL, 30,000 NMWL,

    E-Print Network [OSTI]

    Kirschner, Marc W.

    CENTRICON ® Centrifugal Filter Devices User Guide Centricon centrifugal filter devices with 10-vitro diagnostic use. Centricon centrifugal filter devices with 3,000 NMWL Ultracel YM membranes are for research ................................................... 3 Maximum Centrifugal Force .............................................................. 3 Rotor

  4. Effect of Intake Air Filter Condition on Vehicle Fuel Economy

    SciTech Connect (OSTI)

    Norman, Kevin M; Huff, Shean P; West, Brian H

    2009-02-01

    The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy and the U.S. Environmental Protection Agency (EPA) jointly maintain a fuel economy website (www.fueleconomy.gov), which helps fulfill their responsibility under the Energy Policy Act of 1992 to provide accurate fuel economy information [in miles per gallon (mpg)] to consumers. The site provides information on EPA fuel economy ratings for passenger cars and light trucks from 1985 to the present and other relevant information related to energy use such as alternative fuels and driving and vehicle maintenance tips. In recent years, fluctuations in the price of crude oil and corresponding fluctuations in the price of gasoline and diesel fuels have renewed interest in vehicle fuel economy in the United States. (User sessions on the fuel economy website exceeded 20 million in 2008 compared to less than 5 million in 2004 and less than 1 million in 2001.) As a result of this renewed interest and the age of some of the references cited in the tips section of the website, DOE authorized the Oak Ridge National Laboratory (ORNL) Fuels, Engines, and Emissions Research Center (FEERC) to initiate studies to validate and improve these tips. This report documents a study aimed specifically at the effect of engine air filter condition on fuel economy. The goal of this study was to explore the effects of a clogged air filter on the fuel economy of vehicles operating over prescribed test cycles. Three newer vehicles (a 2007 Buick Lucerne, a 2006 Dodge Charger, and a 2003 Toyota Camry) and an older carbureted vehicle were tested. Results show that clogging the air filter has no significant effect on the fuel economy of the newer vehicles (all fuel injected with closed-loop control and one equipped with MDS). The engine control systems were able to maintain the desired AFR regardless of intake restrictions, and therefore fuel consumption was not increased. The carbureted engine did show a decrease in fuel economy with increasing restriction. However, the level of restriction required to cause a substantial (10-15%) decrease in fuel economy (such as that cited in the literature) was so severe that the vehicle was almost undrivable. Acceleration performance on all vehicles was improved with a clean air filter. Once it was determined how severe the restriction had to be to affect the carbureted vehicle fuel economy, the 2007 Buick Lucerne was retested in a similar manner. We were not able to achieve the level of restriction that was achieved with the 1972 Pontiac with the Lucerne. The Lucerne's air filter box would not hold the filter in place under such severe conditions. (It is believed that this testing exceeded the design limits of the air box.) Tests were conducted at a lower restriction level (although still considerably more severe than the initial clogged filter testing), allowing the air filter to stay seated in the air box, and no significant change was observed in the Lucerne's fuel economy or the AFR over the HFET cycle. Closed-loop control in modern fuel injected vehicle applications is sophisticated enough to keep a clogged air filter from affecting the vehicle fuel economy. However for older, open-loop, carbureted vehicles, a clogged air filter can affect the fuel economy. For the vehicle tested, the fuel economy with a new air filter improved as much as 14% over that with a severely clogged filter (in which the filter was so clogged that drivability was impacted). Under a more typical state of clog, the improvement with a new filter ranged from 2 to 6%.

  5. Radiant zone heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-12-27

    A system includes a particulate matter (PM) filter including an upstream end for receiving exhaust gas and a downstream end. A radiant zoned heater includes N zones, where N is an integer greater than one, wherein each of the N zones includes M sub-zones, where M is an integer greater than or equal to one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones, restricts exhaust gas flow in a portion of the PM filter that corresponds to the selected one of the N zones, and deactivates non-selected ones of the N zones.

  6. Criteria for calculating the efficiency of deep-pleated HEPA filters with aluminum separators during and after design basis accidents

    SciTech Connect (OSTI)

    Bergman, W.; First, M.W.; Anderson, W.L.; Gilbert, H.; Jacox, J.W.

    1995-02-01

    The authors have reviewed the literature on the performance of high efficiency particulate air (HEPA) filters under normal and abnormal conditions to establish criteria for calculating the efficiency of HEPA filters in a DOE nonreactor nuclear facility during and after a Design Basis Accident (DBA). This study is only applicable to the standard deep-pleated HEPA filter with aluminum separators as specified in ASME N509. The literature review included the performance of new filters and parameters that may cause deterioration in the filter performance such as filter age, radiation, corrosive chemicals, seismic and rough handling, high temperature, moisture, particle clogging, high air flow and pressure pulses. The deterioration of the filter efficiency depends on the exposure parameters; in severe exposure conditions the filter will be structurally damaged and have a residual efficiency of 0%. Despite the many studies on HEPA filter performance under adverse conditions, there are large gaps and limitations in the data that introduce significant error in the estimates of HEPA filter efficiencies under DBA conditions. Because of this limitation, conservative values of filter efficiency were chosen when there was insufficient data.

  7. A rigid porous filter and filtration method

    SciTech Connect (OSTI)

    Chiang, Ta-Kuan; Straub, Douglas, Straub L.; Dennis, Richard A.

    1998-12-01

    The present invention involves a porous rigid filter comprising a plurality of concentric filtration elements having internal flow passages and forming external flow passages there between. The present invention also involves a pressure vessel containing the filter for the removal of particulate from high pressure particulate containing gases, and further involves a method for using the filter to remove such particulate. The present filter has the advantage of requiring fewer filter elements due to the high surface area- to-volume ratio provided by the filter, requires a reduced pressure vessel size, and exhibits enhanced mechanical design properties, improved cleaning properties, configuration options, modularity and ease of fabrication.

  8. Electric filter with movable belt electrode

    DOE Patents [OSTI]

    Bergman, W.

    1983-09-20

    A method and apparatus for removing airborne contaminants entrained in a gas or airstream includes an electric filter characterized by a movable endless belt electrode, a grounded electrode, and a filter medium sandwiched there between. Inclusion of the movable, endless belt electrode provides the driving force for advancing the filter medium through the filter, and reduces frictional drag on the filter medium, thereby permitting a wide choice of filter medium materials. Additionally, the belt electrode includes a plurality of pleats in order to provide maximum surface area on which to collect airborne contaminants. 4 figs.

  9. Electric filter with movable belt electrode

    DOE Patents [OSTI]

    Bergman, Werner (Pleasanton, CA)

    1983-01-01

    A method and apparatus for removing airborne contaminants entrained in a gas or airstream includes an electric filter characterized by a movable endless belt electrode, a grounded electrode, and a filter medium sandwiched therebetween. Inclusion of the movable, endless belt electrode provides the driving force for advancing the filter medium through the filter, and reduces frictional drag on the filter medium, thereby permitting a wide choice of filter medium materials. Additionally, the belt electrode includes a plurality of pleats in order to provide maximum surface area on which to collect airborne contaminants.

  10. NIST HANDBOOK 150-15 CHECKLIST (REV. 2011-10-20) PAGE 1 OF 16 Enter Date: Enter NVLAP Lab Code

    E-Print Network [OSTI]

    : NIST HANDBOOK 150-15 CHECKLIST THERMAL INSULATION MATERIALS TESTING PROGRAM Instructions to demonstrate selected test methods as requested by the assessor. #12;DATE: NVLAP LAB CODE: NIST HANDBOOK 150NIST HANDBOOK 150-15 CHECKLIST (REV. 2011-10-20) PAGE 1 OF 16 Enter Date: Enter NVLAP Lab Code

  11. Pre-advising and advising for entering JH Physics, Astrophysics, and related, 2015 1 Entering Junior Honours Physics & Astronomy and Joint Degrees -2015

    E-Print Network [OSTI]

    Greenaway, Alan

    Pre-advising and advising for entering JH Physics, Astrophysics, and related, 2015 1 Entering Junior Honours Physics & Astronomy and Joint Degrees -2015 This brochure aims to give our second year this Thermal and Statistical Physics, and should do Electromagnetism in JH. There are significant changes

  12. Enter Search Term Enter ED Online ID Advanced Search | Help Electronic Design Home Recent Articles Back Issues Featured Vendors Discussion Forums Subscribe / Renew

    E-Print Network [OSTI]

    LaMeres, Brock J.

    Enter Search Term Enter ED Online ID Advanced Search | Help Electronic Design Home Recent Articles- analyzer vendors have kept pace with industry demands in terms of speed and functionality. However, in many tools. Logic- analyzer vendors have kept pace with industry demands in terms of speed and functionality

  13. Design rules for dislocation filters (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Design rules for dislocation filters Citation Details In-Document Search Title: Design rules for dislocation filters The efficacy of strained layer threading dislocation filter...

  14. Cordierite silicon nitride filters. Final report

    SciTech Connect (OSTI)

    Sawyer, J.; Buchan, B.; Duiven, R.; Berger, M.; Cleveland, J.; Ferri, J.

    1992-02-01

    The objective of this project was to develop a silicon nitride based crossflow filter. This report summarizes the findings and results of the project. The project was phased with Phase I consisting of filter material development and crossflow filter design. Phase II involved filter manufacturing, filter testing under simulated conditions and reporting the results. In Phase I, Cordierite Silicon Nitride (CSN) was developed and tested for permeability and strength. Target values for each of these parameters were established early in the program. The values were met by the material development effort in Phase I. The crossflow filter design effort proceeded by developing a macroscopic design based on required surface area and estimated stresses. Then the thermal and pressure stresses were estimated using finite element analysis. In Phase II of this program, the filter manufacturing technique was developed, and the manufactured filters were tested. The technique developed involved press-bonding extruded tiles to form a filter, producing a monolithic filter after sintering. Filters manufactured using this technique were tested at Acurex and at the Westinghouse Science and Technology Center. The filters did not delaminate during testing and operated and high collection efficiency and good cleanability. Further development in areas of sintering and filter design is recommended.

  15. Improving Filtering for Computer Graphics 

    E-Print Network [OSTI]

    Manson, Josiah

    2014-04-30

    When drawing images onto a computer screen, the information in the scene is typically more detailed than can be displayed. Most objects, however, will not be close to the camera, so details have to be filtered out, or anti-aliased, when the objects...

  16. On the Kalman Filter and Its Variations

    E-Print Network [OSTI]

    Lindsey, Theodore S.

    2014-05-31

    The objective of this paper is to explore the standard Kalman filter and two non-linear variations. Additionally, we will discuss the derivation of the Kalman filter using Newton's method. Next we will consider the implementation of both...

  17. Automatic tuning of continuous-time filters 

    E-Print Network [OSTI]

    Sumesaglam, Taner

    2004-11-15

    Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed...

  18. Recycling Authorizations: Toward Secondary and Approximate Authorizations Model

    E-Print Network [OSTI]

    of matching best suitable approximate authorizations. 1 Introduction Although, every authorization decision

  19. In situ microbial filter used for bioremediation

    DOE Patents [OSTI]

    Carman, M. Leslie (San Ramon, CA); Taylor, Robert T. (Roseville, CA)

    2000-01-01

    An improved method for in situ microbial filter bioremediation having increasingly operational longevity of an in situ microbial filter emplaced into an aquifer. A method for generating a microbial filter of sufficient catalytic density and thickness, which has increased replenishment interval, improved bacteria attachment and detachment characteristics and the endogenous stability under in situ conditions. A system for in situ field water remediation.

  20. Electrically heated particulate filter restart strategy

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-07-12

    A control system that controls regeneration of a particulate filter is provided. The system generally includes a propagation module that estimates a propagation status of combustion of particulate matter in the particulate filter. A regeneration module controls current to the particulate filter to re-initiate regeneration based on the propagation status.

  1. Nonlinear bayesian filtering with applications to estimation and navigation 

    E-Print Network [OSTI]

    Lee, Deok-Jin

    2005-08-29

    . First, as sampling-based nonlinear filters, the sigma point filters, the unscented Kalman fil- ter and the divided difference filter are investigated. Secondly, a direct numerical nonlinear filter is introduced where the state conditional probability...

  2. Ceramic hot-gas filter

    DOE Patents [OSTI]

    Connolly, E.S.; Forsythe, G.D.; Domanski, D.M.; Chambers, J.A.; Rajendran, G.P.

    1999-05-11

    A ceramic hot-gas candle filter is described having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during back pulse cleaning and is resistant to chemical degradation at high temperatures.

  3. Filter for a drill string

    DOE Patents [OSTI]

    Hall, David R. (Provo, UT); Pixton, David S. (Lehi, UT); Briscoe, Michael (Lehi, UT); McPherson, James (Sandy, UT)

    2007-12-04

    A filter for a drill string comprises a perforated receptacle having an open end and a perforated end and first and second mounting surfaces are adjacent the open end. A transmission element is disposed within each of the first and second mounting surfaces. A capacitor may modify electrical characteristics of an LC circuit that comprises the transmission elements. The respective transmission elements are in communication with each other and with a transmission network integrated into the drill string. The transmission elements may be inductive couplers, direct electrical contacts, or optical couplers. In some embodiments of the present invention, the filter comprises an electronic component. The electronic component may be selected from the group consisting of a sensor, a router, a power source, a clock source, a repeater, and an amplifier.

  4. Ceramic hot-gas filter

    DOE Patents [OSTI]

    Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

    1999-01-01

    A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

  5. Evaluation of HEPA filter service life

    SciTech Connect (OSTI)

    Fretthold, J.K.; Stithem, A.R.

    1997-07-14

    Rocky Flats Environmental Technology Site (RFETS), has approximately 10,000 High Efficiency Particulate Air (HEPA) Filters installed in a variety of filter plenums. These ventilation/filtration plenum systems are used to control the release of airborne particulate contaminates to the environment during normal operations and potential accidents. This report summarizes the results of destructive and non-destructive tests on HEPA filters obtained from a wide variety of ages and service conditions. These tests were performed to determine an acceptable service life criteria for HEPA filters used at Rocky Flats Environmental Technology Site (RFETS). A total of 140 filters of various ages (1972 to 1996) and service history (new, aged unused, used) were tested. For the purpose of this report, filter age from manufacture date/initial test date to the current sample date was used, as opposed to the actual time a filter was installed in an operating system.

  6. Development of diesel particulate filter made of porous metal

    SciTech Connect (OSTI)

    Matsunuma, Kenji; Ihara, Tomohiko; Hanamoto, Yuichi; Nakajima, Shiro; Okamoto, Satoru

    1996-09-01

    Pollution is worsening in cities. The exhaust gas from vehicles is the main cause of air pollution in cities. The major drawback of the diesel engine is the Particulate Matter (PM) contained in the exhaust fumes which is also said to lead to cancer. For about 20 years many tests have been conducted in order to reduce PM in diesel exhaust gas. However the exhaust gas in present diesel engines contains a significant amount of PM. This is because there is no practical material for the Diesel Particulate Filter (DPF). Conventional ceramic materials have problems such as cracking and melting during regeneration and conventional metal materials lack adequate corrosion resistance for practical use. The authors present a new type of DPF made of metal porous matter (Celmet) which is designed with a thermal construction and simple control system in order to solve the problem of diesel exhaust gas. As metal porous matter has low pressure loss per unit filter area during filtering, two-cylinder filters have similar trapping performance to the honeycomb type filter such as pressure loss and trapping efficiency, In this paper, 2,800--3,400cc diesel engines were used. Then a cycle of collection and regeneration with an electric heater and 12V battery was performed under several conditions on the engine bench and trapping efficiency and pressure loss were measured. It was confirmed that this new type DPF has good practical use in automobiles. Tests on forklifts were also performed. In a simple control system, this DPF can be applied to practical use. It is trouble-free for 6 months. The total performance of DPF for vehicles such as forklifts and heavy duty vehicles and the possibilities for other practical uses was mainly discussed.

  7. Method and apparatus for filtering gas with a moving granular filter bed

    DOE Patents [OSTI]

    Brown, Robert C. (Ames, IA); Wistrom, Corey (Ames, IA); Smeenk, Jerod L. (Ames, IA)

    2007-12-18

    A method and apparatus for filtering gas (58) with a moving granular filter bed (48) involves moving a mass of particulate filter material (48) downwardly through a filter compartment (35); tangentially introducing gas into the compartment (54) to move in a cyclonic path downwardly around the moving filter material (48); diverting the cyclonic path (58) to a vertical path (62) to cause the gas to directly interface with the particulate filter material (48); thence causing the gas to move upwardly through the filter material (48) through a screened partition (24, 32) into a static upper compartment (22) of a filter compartment for exodus (56) of the gas which has passed through the particulate filter material (48).

  8. Use the drop-down search menus and operators (AND, OR, NOT) to customize your search. Search by topic, author, journal title, publication year, and other fields.

    E-Print Network [OSTI]

    California at Berkeley, University of

    by topic, author, journal title, publication year, and other fields. Topic Enter your search words, joined, and subject terms; choose Title from the drop-down search menu to restrict your search to document titles only for the most comprehensive search. 1.To find all articles by Francis Harry Compton Crick, click , enter Crick F

  9. Cesium trapping characteristics on fly ash filter according to different carrier gases

    SciTech Connect (OSTI)

    Shin, Jin-Myeong; Park, Jang-Jin; Song, Kee-Chan

    2007-07-01

    Fly ash, which is a kind of waste from a coal fired power plant, has been used as a trapping material because it contains silica and alumina suitable for forming pollucite (CsAlSi{sub 2}O{sub 6}). Fly ash is sintered in order to fabricate it into a self-standing filter. The effect of a carrier gas on a cesium trapping quantity is investigated to analyze the cesium trapping characteristics by the fly ash filter in a lab-scale experimental apparatus. The chemical form of the cesium trapped on the filter after trapping cesium is identified to be a pollucite phase regardless of the type of carrier gas. The trapping efficiency of cesium by the fly ash filter under the air and NO{sub x}/air conditions is up to 99.0 %. However, the trapping efficiency of the cesium under the SO{sub x} condition was decreased to 80.0 %. (authors)

  10. Entering Freshmen at Main Campus 3,755 45%wereintop10%ofhighschoolclass

    E-Print Network [OSTI]

    Chandy, John A.

    Entering Freshmen at Main Campus ­ 3,755 ·45%wereintop10%ofhighschoolclass ·82%wereintop25internationalstudentpopulation. 2 76%ofundergraduatesonMainCampusareConnecticutresidents. All169Connecticuttownsand43of50 Scores National Connecticut Main Campus (CriticalReadingandMath) High School High School Entering

  11. Doing data regression in the TI82 or TI83 Entering the data

    E-Print Network [OSTI]

    Torres, Rodolfo

    RegEQ. ffl Press ENTER to get Y1= the regression function. ffl Press GRAPH To forecast or compute. To forecast or compute a value ffl Press FCST in the STAT menu. ffl Enter the value of X= and move to Y=. ffl the answer. Plotting the data and the regression curve ffl Press GRAPH . ffl Clear the Y= and set WIND

  12. Face crack reduction strategy for particulate filters

    SciTech Connect (OSTI)

    Gonze, Eugene V

    2012-01-31

    A system comprises a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and at least one portion. A control module initiates combustion of PM in the PM filter using a heater and selectively adjusts oxygen levels of the exhaust gas to adjust a temperature of combustion adjacent to the at least one portion of the PM filter. A method comprises providing a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and at least one portion; initiating combustion of PM in the PM filter using a heater; selectively adjusting oxygen levels of the exhaust gas to adjust a temperature of combustion adjacent to the at least one portion of the PM filter.

  13. CHARACTERIZATION OF A RIGID BARRIER FILTER SYSTEM

    SciTech Connect (OSTI)

    Chiang, Ta-Kuan

    2001-11-06

    A mathematical model is formulated to describe the dynamics of a rigid barrier filter system. Complete with filtration, regeneration and particle re-deposition, this model provides sizing information for new filter systems and diagnostic information for operating filter systems. To turn this model into a practical and smart filter system predictive model, monitoring devices for variables such as real-time particle concentration and size distribution are currently under laboratory development. The program goal is to introduce a smart filter system to supervise its operation and to assure its system reliability. Primarily, a smart filter system will update operating information, sound up malfunction alarms, and provide self-activated measures such as adjusting the cleaning frequency, intensity and back-pulse duration.

  14. Diesel particulate filter with zoned resistive heater

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-03-08

    A diesel particulate filter assembly comprises a diesel particulate filter (DPF) and a heater assembly. The DPF filters a particulate from exhaust produced by an engine. The heater assembly has a first metallic layer that is applied to the DPF, a resistive layer that is applied to the first metallic layer, and a second metallic layer that is applied to the resistive layer. The second metallic layer is etched to form a plurality of zones.

  15. Zone heated diesel particulate filter electrical connection

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI)

    2010-03-30

    An electrical connection system for a particulate filter is provided. The system includes: a particulate filter (PF) disposed within an outer shell wherein the PF is segmented into a plurality of heating zones; an outer mat disposed between the particulate filter and the outer shell; an electrical connector coupled to the outer shell of the PF; and a plurality of printed circuit connections that extend along the outer surface of the PF from the electrical connector to the plurality of heating zones.

  16. OKLAHOMA STATE UNIVERSITY MEDICAL AUTHORITY

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    OKLAHOMA STATE UNIVERSITY MEDICAL AUTHORITY June 30, 2010 #12;OKLAHOMA STATE UNIVERSITY MEDICAL Authority Members Oklahoma State University Medical Authority Tulsa, Oklahoma We have audited the accompanying statements of financial position of the Oklahoma State University Medical Authority (the

  17. OKLAHOMA STATE UNIVERSITY MEDICAL AUTHORITY

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    OKLAHOMA STATE UNIVERSITY MEDICAL AUTHORITY June 30, 2009 #12;OKLAHOMA STATE UNIVERSITY MEDICAL Authority Members Oklahoma State University Medical Authority Tulsa, Oklahoma We have audited the accompanying statements of financial position of the Oklahoma State University Medical Authority (the

  18. Electrically-Assisted Diesel Particulate Filter Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation pm041lance2011p.pdf More Documents & Publications Electrically-Assisted Diesel Particulate Filter Regeneration Substrate Studies of an Electrically-Assisted Diesel...

  19. Continuous air monitor filter changeout apparatus

    DOE Patents [OSTI]

    Rodgers, John C. (Santa Fe, NM)

    2008-07-15

    An apparatus and corresponding method for automatically changing out a filter cartridge in a continuous air monitor. The apparatus includes: a first container sized to hold filter cartridge replacements; a second container sized to hold used filter cartridges; a transport insert connectively attached to the first and second containers; a shuttle block, sized to hold the filter cartridges that is located within the transport insert; a transport driver mechanism means used to supply a motive force to move the shuttle block within the transport insert; and, a control means for operating the transport driver mechanism.

  20. Active Soot Filter Regeneration | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emissions from Diesel Engines Development of an Active Regeneration Diesel Particulate Filter System Investigation on continuous soot oxidation and NOx reduction by SCR coated DPF...

  1. Filters and Components With Inductance Cancellation

    E-Print Network [OSTI]

    Neugebauer, Timothy C.

    Electrical filters are important for attenuating electrical ripple, eliminating electromagnetic interference (EMI) and susceptibility, improving power quality, and minimizing electromagnetic signature. Capacitors are ...

  2. Diesel Desulfurization Filter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Posters 2005deerrohrbach.pdf More Documents & Publications Desulfurization Fuel Filter NOx Adsorber Regeneration Phenomena In Heavy Duty Applications Investigation of the...

  3. In-place filter testing summary

    SciTech Connect (OSTI)

    Ortiz, J.P.; Garcia, E.D.; Ortega, J.M.

    1988-03-01

    The most common method of identifying particle penetration through a filter or adsorber system is through the performance of a periodic penetration test, i.e., in-place test or leak test using an aerosol or gas vapor to challenge the filter or adsorber system. The aerosol is usually formed by vaporization of a liquid, di-2(ethelhexyl sebacate) (DEHS), and allowed to condense to form liquid particles of a certain size and distribution. The gas vapor is formed by vaporization of Freon 11 liquid. The periodic penetration test, although conducted annually, can and has been demonstrated to show the beginning degradation of a filter or adsorber system. Other evidence of penetration can include detection of radiation downstream of the filter system or the existence of an unusually low pressure drop across the filter, i.e., torn filter, etc. However, these kinds of occurrences show up instantaneously and could release radioactive material to the atmosphere before the systems could be shut down. When a filter system fails the in--place test or is showing evidence of.filter or component degradation, corrective measures are put into place in order to return,the system back to its best operating condition. This report presents a summary of all filter tests.

  4. THE FILTERING OF OZONE CONCENTRATION MEASUREMENTS COLLECTED IN A TURBULENT AIR STREAM USING BAYESIAN MODELS

    E-Print Network [OSTI]

    West, Mike

    THE FILTERING OF OZONE CONCENTRATION MEASUREMENTS COLLECTED IN A TURBULENT AIR STREAM USING University. The authors thank Alex Guenther for supplying the high frequency ozone concentration measurements a multiscale Bayesian model for separating ozone (O 3 ) concentration turbulent fluctuations from such inherent

  5. Advances in Filter Miniaturization and Design/Analysis of RF MEMS Tunable Filters 

    E-Print Network [OSTI]

    Sekar, Vikram

    2012-10-19

    The main purpose of this dissertation was to address key issues in the design and analysis of RF/microwave filters for wireless applications. Since RF/microwave filters are one of the bulkiest parts of communication systems, their miniaturization...

  6. 1 Filter_Demo_Project_090910.doc Filter Design & Analysis using Microwave Office

    E-Print Network [OSTI]

    Weller/USF 1 Filter_Demo_Project_090910.doc Filter Design & Analysis using Microwave Office_Demo_MWO. The purpose of the module is to introduce the subject of RF/microwave lumped element filter design, looking simulator features of the CAD tool Microwave Office (or MWO, from Applied Wave Research). In another module

  7. Spectral diagonal ensemble Kalman filters

    E-Print Network [OSTI]

    Kasanický, Ivan; Vejmelka, Martin

    2015-01-01

    A new type of ensemble Kalman filter is developed, which is based on replacing the sample covariance in the analysis step by its diagonal in a spectral basis. It is proved that this technique improves the aproximation of the covariance when the covariance itself is diagonal in the spectral basis, as is the case, e.g., for a second-order stationary random field and the Fourier basis. The method is extended by wavelets to the case when the state variables are random fields, which are not spatially homogeneous. Efficient implementations by the fast Fourier transform (FFT) and discrete wavelet transform (DWT) are presented for several types of observations, including high-dimensional data given on a part of the domain, such as radar and satellite images. Computational experiments confirm that the method performs well on the Lorenz 96 problem and the shallow water equations with very small ensembles and over multiple analysis cycles.

  8. Development of Self-destructing Filter Cake 

    E-Print Network [OSTI]

    Rostami, Ameneh

    2010-08-24

    -destructing drilling fluid systems need enough time for the solid acid to be hydrolyzed and therefore remove the filter cake. After 20 hours of contact with the water as the only cleaning solution, about 80 percent of the filter cake was removed. Calcite is found...

  9. Rickard Karlsson ISIS Particle Filtering in Practice

    E-Print Network [OSTI]

    Schön, Thomas

    Rickard Karlsson ISIS 2004-11-04 Particle Filtering in Practice Sensor fusion, Positioning and Tracking Rickard Karlsson Automatic Control Linköping University, SWEDEN rickard@isy.liu.se #12;Rickard Karlsson ISIS Linköping 2004-11-05 Particle Filtering within ISIS from my perspective #12;Rickard Karlsson

  10. Active imaging system with Faraday filter

    DOE Patents [OSTI]

    Snyder, J.J.

    1993-04-13

    An active imaging system has a low to medium powered laser transmitter and receiver wherein the receiver includes a Faraday filter with an ultranarrow optical bandpass and a bare (nonintensified) CCD camera. The laser is locked in the vicinity of the passband of the Faraday filter. The system has high sensitivity to the laser illumination while eliminating solar background.

  11. Automatic tuning for linearly tunable filter 

    E-Print Network [OSTI]

    Huang, Sung-Ling

    2004-09-30

    A new tuning scheme for linearly tunable high-Q filters is proposed. The tuning method is based on using the phase information for both frequency and Q factor tuning. There is no need to find out the relationship between a filter's passband...

  12. A fuzzy-tuned adaptive Kalman filter 

    E-Print Network [OSTI]

    Painter, John H.; Young Hwan Lho

    1993-12-01

    In this paper, fuzzy processing is applied to the adaptive Kalman filter. The filter gain coefficients are adapted over a 50 dB range of unknown signal/noise dynamics, using fuzzy membership functions. Specific simulation results are shown for a...

  13. Centrifugal Filter Devices FOR CONCENTRATION AND PURIFICATION

    E-Print Network [OSTI]

    Kirschner, Marc W.

    Centricon® Plus-70 Centrifugal Filter Devices FOR CONCENTRATION AND PURIFICATION OF BIOLOGICAL-70 centrifugal filter is a disposable, single-use device designed for rapid processing of aqueous biological solu- tions in volumes ranging from 15 to 70 mL. It is compatible with swinging-bucket centrifuges

  14. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. Cancels DOE O 412.1.

  15. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's Planning, Programming, Budgeting, and Evaluation process. Admin Chg 1, dated 5-21-2014, cancels DOE O 412.1A.

  16. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-04-20

    It establishes a work authorization and control process for work performed by designated management and operating (M&O), management and integrating (M&I), environmental restoration management contracts (ERMC) and other contracts determined by the Procurement Executive (hereafter referred to as M&O contractors). Cancels DOE O 5700.7C. Canceled by DOE O 412.1A.

  17. Thermovoltaic semiconductor device including a plasma filter

    DOE Patents [OSTI]

    Baldasaro, Paul F. (Clifton Park, NY)

    1999-01-01

    A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

  18. Method for reducing pressure drop through filters, and filter exhibiting reduced pressure drop

    DOE Patents [OSTI]

    Sappok, Alexander; Wong, Victor

    2014-11-18

    Methods for generating and applying coatings to filters with porous material in order to reduce large pressure drop increases as material accumulates in a filter, as well as the filter exhibiting reduced and/or more uniform pressure drop. The filter can be a diesel particulate trap for removing particulate matter such as soot from the exhaust of a diesel engine. Porous material such as ash is loaded on the surface of the substrate or filter walls, such as by coating, depositing, distributing or layering the porous material along the channel walls of the filter in an amount effective for minimizing or preventing depth filtration during use of the filter. Efficient filtration at acceptable flow rates is achieved.

  19. Galen Sasaki University of Hawaii 1 Multiplexers and Filters

    E-Print Network [OSTI]

    Sasaki, Galen H.

    1 Galen Sasaki University of Hawaii 1 Components · Multiplexers and Filters ­ Multilayer Dielectric Filter · Optical Amplifiers ­ EDFAs Galen Sasaki University of Hawaii 2 Outline · Multiplexers Grating ­ Acousto-Optical Tunable Filter · Optical Amplifiers ­ EDFAs Galen Sasaki University of Hawaii 3

  20. Finite element modeling of flow through ceramic pot filters

    E-Print Network [OSTI]

    Kelly, Anna C

    2013-01-01

    Pure Home Water (PHW) is an organization based in Tamale, Ghana that manufactures and distributes ceramic water filters. While many ceramic filter factories manufacture flowerpot-shaped filters, PHW has transitioned from ...

  1. Education in anesthesia for nurses entered a new era in Michigan in September 1963. Nine registered nurses entered the program in anesthesia offered by Detroit Receiving

    E-Print Network [OSTI]

    Berdichevsky, Victor

    registered nurses entered the program in anesthesia offered by Detroit Receiving Hospital in collaborationD., the Wayne State University Nurse Anesthesia Program (WSUNAP), became the first in the country to offer's degree in anesthesia. The program became the second in the country to offer a Master of Science Degree

  2. Hawaii Clean Energy Initiative Permit to Cross or Enter the State...

    Open Energy Info (EERE)

    Hawaii Clean Energy Initiative Permit to Cross or Enter the State Energy Corridor Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance...

  3. Date______________________________ Enter Web Voucher # _____________________________ NON-STANDARD CHECK PROCESSING SERVICES FORM

    E-Print Network [OSTI]

    Xie, Xiaoliang Sunney

    the standard check service. Please review Check Processing Policy criteria (http://vpf-webDate______________________________ Enter Web Voucher # _____________________________ NON-STANDARD CHECK PROCESSING SERVICES FORM Harvard will issue checks outside the standard check service for non

  4. Use of flourescent surrogate organisms for enteric pathogens in validation of carcass decontamination treatments 

    E-Print Network [OSTI]

    Moseley, Tiffany Marie

    2009-05-15

    During the harvesting process, meat products can become contaminated with enteric pathogens, such as Escherichia coli O157:H7 and Salmonella Typhimurium. Surrogates for these pathogens would be beneficial for validating ...

  5. Workers Prepare to Safely Enter One of Hanford Site’s Most Hazardous Rooms

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – When workers enter the hazardous, historic McCluskey Room at the Hanford site this summer, they will be safer due to their preparation and involvement in planning and training for the job.

  6. Organizational Evaluation and Authority 

    E-Print Network [OSTI]

    Scott, Richard W.; Dornbusch, Sanford M.; Busching, Bruce C.; Laing, James D.

    2015-07-21

    condition for internal pressures for change in the authority system--in short, for instability of the system. Both conception and theory are limited in scope to organizations which fulfill these conditions: 1) Organizational sanctions are distributed..., at least in part, on the basis of evaluations made of participants. 2) Evaluators who influence the distribution of organizational sanctions attempt to base their evaluations, at least in part, on the performance of organizational tasks by participants...

  7. Advanced High Porosity Ceramic Honeycomb Wall Flow Filters |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Porosity Ceramic Honeycomb Wall Flow Filters Advanced High Porosity Ceramic Honeycomb Wall Flow Filters 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007)....

  8. Blowers for Air Assisted Diesel Particulate Filter Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Blowers for Air Assisted Diesel Particulate Filter Regeneration Blowers for Air Assisted Diesel Particulate Filter Regeneration Prototypes of a new series of high-pressure,...

  9. New Cordierite Diesel Particulate Filters for Catalyzed and Non...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cordierite Diesel Particulate Filters for Catalyzed and Non-Catalyzed Applications New Cordierite Diesel Particulate Filters for Catalyzed and Non-Catalyzed Applications 2003 DEER...

  10. Diesel Soot Filter Characterization and Modeling for Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Soot Filter Characterization and Modeling for Advanced Substrates Diesel Soot Filter Characterization and Modeling for Advanced Substrates 2009 DOE Hydrogen Program and Vehicle...

  11. MobiCleanTM Soot Filter for Diesel Locomotiive Applications ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MobiCleanTM Soot Filter for Diesel Locomotiive Applications MobiCleanTM Soot Filter for Diesel Locomotiive Applications 2005 Diesel Engine Emissions Reduction (DEER) Conference...

  12. Value Analysis of Alternative Diesel Particulate Filter (DPF...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value Analysis of Alternative Diesel Particulate Filter (DPF) Substrates for Future Diesel Aftertreatment Systems Value Analysis of Alternative Diesel Particulate Filter (DPF)...

  13. Diesel Particulate Filter: A Success for Faurecia Exhaust Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filter: A Success for Faurecia Exhaust Systems Diesel Particulate Filter: A Success for Faurecia Exhaust Systems 2003 DEER Conference Presentation: Faurecia Exhaust Systems...

  14. California Energy Standards Recognize the Importance of Filter...

    Energy Savers [EERE]

    Energy Standards Recognize the Importance of Filter Selection - Building America Top Innovation California Energy Standards Recognize the Importance of Filter Selection - Building...

  15. Evaluation of Passive and Active Soot Filters for Removal of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Passive and Active Soot Filters for Removal of Particulate Emissions from Diesel Engines Evaluation of Passive and Active Soot Filters for Removal of Particulate Emissions from...

  16. Advanced Ceramic Filter For Diesel Emission Control | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ceramic Filter For Diesel Emission Control Advanced Ceramic Filter For Diesel Emission Control 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: Dow Automotive...

  17. U-252: Barracuda Web Filter Input Validation Flaws Permit Cross...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks U-252: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks September...

  18. CARB Verification of Catalyzed Diesel Particulate Filters for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CARB Verification of Catalyzed Diesel Particulate Filters for Emergency Generator Sets CARB Verification of Catalyzed Diesel Particulate Filters for Emergency Generator Sets 2005...

  19. A Standard Soot Generator for Diesel Particulate Filter Testing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Standard Soot Generator for Diesel Particulate Filter Testing A Standard Soot Generator for Diesel Particulate Filter Testing Poster presentation at the 2007 Diesel...

  20. Neutron Imaging of Diesel Particulate Filters | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Neutron Imaging of Diesel Particulate Filters Neutron computed tomography shows soot and ash loading in a cordierite diesel particulate filter deer09bilheux.pdf More Documents &...

  1. Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and...

  2. Radio Frequency Diesel Particulate Filter Sensor Reduces Fuel...

    Office of Environmental Management (EM)

    Radio Frequency Diesel Particulate Filter Sensor Reduces Fuel Consumption, Wins R&D 100 Award Radio Frequency Diesel Particulate Filter Sensor Reduces Fuel Consumption, Wins R&D...

  3. TESTING OF THE DUAL ROTARY FILTER SYSTEM

    SciTech Connect (OSTI)

    Herman, D.; Fowley, M.; Stefanko, D.

    2011-08-29

    The Savannah River National Laboratory (SRNL) installed and tested two hydraulically connected SpinTek rotary microfilter (RMF) units to determine the behavior of a multiple filter system. Both units were successfully controlled by a control scheme written in DELTA-V architecture by Savannah River Remediation (SRR) Process Control Engineering personnel. The control system was tuned to provide satisfactory response to changing conditions during the operation of the multi-filter system. Stability was maintained through the startup and shutdown of one of the filter units while the second was still in operation. The installation configuration originally proposed by the Small Colum Ion Exchange (SCIX) project of independent filter and motor mountings may be susceptible to vibration. Significant stiffening of the filter and motor mounts was required to minimize the vibration. Alignment of the motor to the filter was a challenge in this test configuration. The deployment configuration must be easy to manipulate and allow for fine adjustment. An analysis of the vibration signature of the test system identified critical speeds. Whether it corresponds to the resonance frequency of a rotor radial vibration mode that was excited by rotor unbalance is uncertain based upon the measurements. A relative motion series should be completed on the filter with the final shaft configuration to determine if the resonances exist in the final filter design. The instrumentation selected for deployment, including the concentrate discharge control valve and flow meters, performed well. Automation of the valve control integrated well with the control scheme and when used in concert with the other control variables, allowed automated control of the dual RMF system. The one area of concern with the instrumentation was the condition resulting when the filtrate flow meter operated with less than three gpm. This low flow was at the lower range of performance for the flow meter. This should not be an issue in deployment where the desired flow rate will be within the normal operating range of the meter. Testing demonstrated that the use of a flexible line for the filtrate discharge is highly desired at the outlet of the rotary union to transition to the system piping. Isolating the vibration from the rotary union will significantly improve the lifetime of the seals. Methods to monitor and isolate individual filters should be considered during deployment. The ability to diagnose issues and isolate individual filters would allow isolation prior to failure. Thus, filters may be cleaned or repaired instead of requiring complete replacement if the condition were to continue unnoticed. Isolating the filtrate line of each filter during startup will minimize the premature buildup of solids on the filter disks. Several tests have shown that the method of filter startup can improve performance lifetime of the filters. The installation must factor in an air inlet for the draining of a filter that does not involve a reverse flow through the filter disks. The reverse flow may cause deformation of the disks or may damage other components of the filters themselves.

  4. Multiple stage multiple filter hydrate store

    DOE Patents [OSTI]

    Bjorkman, Jr., Harry K. (Birmingham, MI)

    1983-05-31

    An improved hydrate store for a metal halogen battery system is disclosed which employs a multiple stage, multiple filter means or separating the halogen hydrate from the liquid used in forming the hydrate. The filter means is constructed in the form of three separate sections which combine to substantially cover the interior surface of the store container. Exit conduit means is provided in association with the filter means for transmitting liquid passing through the filter means to a hydrate former subsystem. The hydrate former subsystem combines the halogen gas generated during the charging of the battery system with the liquid to form the hydrate in association with the store. Relief valve means is interposed in the exit conduit means for controlling the operation of the separate sections of the filter means, such that the liquid flow through the exit conduit means from each of the separate sections is controlled in a predetermined sequence. The three separate sections of the filter means operate in three discrete stages to provide a substantially uniform liquid flow to the hydrate former subsystem during the charging of the battery system. The separation of the liquid from the hydrate causes an increase in the density of the hydrate by concentrating the hydrate along the filter means.

  5. Multiple stage multiple filter hydrate store

    DOE Patents [OSTI]

    Bjorkman, H.K. Jr.

    1983-05-31

    An improved hydrate store for a metal halogen battery system is disclosed which employs a multiple stage, multiple filter means for separating the halogen hydrate from the liquid used in forming the hydrate. The filter means is constructed in the form of three separate sections which combine to substantially cover the interior surface of the store container. Exit conduit means is provided in association with the filter means for transmitting liquid passing through the filter means to a hydrate former subsystem. The hydrate former subsystem combines the halogen gas generated during the charging of the battery system with the liquid to form the hydrate in association with the store. Relief valve means is interposed in the exit conduit means for controlling the operation of the separate sections of the filter means, such that the liquid flow through the exit conduit means from each of the separate sections is controlled in a predetermined sequence. The three separate sections of the filter means operate in three discrete stages to provide a substantially uniform liquid flow to the hydrate former subsystem during the charging of the battery system. The separation of the liquid from the hydrate causes an increase in the density of the hydrate by concentrating the hydrate along the filter means. 7 figs.

  6. Plan Amendment Language for the Moratorium of Vessels Entering The Groundfish Fisheries in the Gulf of Alaska

    E-Print Network [OSTI]

    Plan Amendment Language for the Moratorium of Vessels Entering The Groundfish Fisheries in the Gulf of Alaska A new Section 4.4.1.2 titled "Moratorium on Vessels Entering the Fisheries" would be added and would read as follows: 4.4.1.2 Moratorium on Vessels Entering the Fisheries Beginning on (insert

  7. Neutron Imaging of Diesel Particulate Filters

    SciTech Connect (OSTI)

    Strzelec, Andrea; Bilheux, Hassina Z; FINNEY, Charles E A; Daw, C Stuart; Foster, Prof. Dave; Rutland, Prof. Christopher J.; Schillinger, Burkhard; Schulz, Michael

    2009-01-01

    This article presents nondestructive neutron computed tomography (nCT) measurements of Diesel Particulate Filters (DPFs) as a method to measure ash and soot loading in the filters. Uncatalyzed and unwashcoated 200cpsi cordierite DPFs exposed to 100% biodiesel (B100) exhaust and conventional ultra low sulfur 2007 certification diesel (ULSD) exhaust at one speed-load point (1500rpm, 2.6bar BMEP) are compared to a brand new (never exposed) filter. Precise structural information about the substrate as well as an attempt to quantify soot and ash loading in the channel of the DPF illustrates the potential strength of the neutron imaging technique.

  8. Electrically heated particulate filter embedded heater design

    DOE Patents [OSTI]

    Gonze, Eugene V.; Chapman, Mark R.

    2014-07-01

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine and wherein an upstream surface of the particulate filter includes machined grooves. A grid of electrically resistive material is inserted into the machined grooves of the exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF.

  9. Metrics For Comparing Plasma Mass Filters

    SciTech Connect (OSTI)

    Abraham J. Fetterman and Nathaniel J. Fisch

    2012-08-15

    High-throughput mass separation of nuclear waste may be useful for optimal storage, disposal, or environmental remediation. The most dangerous part of nuclear waste is the fission product, which produces most of the heat and medium-term radiation. Plasmas are well-suited to separating nuclear waste because they can separate many different species in a single step. A number of plasma devices have been designed for such mass separation, but there has been no standardized comparison between these devices. We define a standard metric, the separative power per unit volume, and derive it for three different plasma mass filters: the plasma centrifuge, Ohkawa filter, and the magnetic centrifugal mass filter. __________________________________________________

  10. Metrics for comparing plasma mass filters

    SciTech Connect (OSTI)

    Fetterman, Abraham J.; Fisch, Nathaniel J.

    2011-10-15

    High-throughput mass separation of nuclear waste may be useful for optimal storage, disposal, or environmental remediation. The most dangerous part of nuclear waste is the fission product, which produces most of the heat and medium-term radiation. Plasmas are well-suited to separating nuclear waste because they can separate many different species in a single step. A number of plasma devices have been designed for such mass separation, but there has been no standardized comparison between these devices. We define a standard metric, the separative power per unit volume, and derive it for three different plasma mass filters: the plasma centrifuge, Ohkawa filter, and the magnetic centrifugal mass filter.

  11. Method and apparatus for a self-cleaning filter

    DOE Patents [OSTI]

    Diebold, James P. (Lakewood, CO); Lilley, Arthur (Finleyville, PA); Browne, III, Kingsbury (Golden, CO); Walt, Robb Ray (Aurora, CO); Duncan, Dustin (Littleton, CO); Walker, Michael (Longmont, CO); Steele, John (Aurora, CO); Fields, Michael (Arvada, CO)

    2010-11-16

    A method and apparatus for removing fine particulate matter from a fluid stream without interrupting the overall process or flow. The flowing fluid inflates and expands the flexible filter, and particulate is deposited on the filter media while clean fluid is permitted to pass through the filter. This filter is cleaned when the fluid flow is stopped, the filter collapses, and a force is applied to distort the flexible filter media to dislodge the built-up filter cake. The dislodged filter cake falls to a location that allows undisrupted flow of the fluid after flow is restored. The shed particulate is removed to a bin for periodic collection. A plurality of filter cells can operate independently or in concert, in parallel, or in series to permit cleaning the filters without shutting off the overall fluid flow. The self-cleaning filter is low cost, has low power consumption, and exhibits low differential pressures.

  12. Apparatus and filtering systems relating to combustors in combustion turbine engines

    DOE Patents [OSTI]

    Johnson, Thomas Edward (Greer, SC); Zuo, Baifang (Simpsonville, SC); Stevenson, Christian Xavier (Inman, SC)

    2012-03-27

    A combustor for a combustion turbine engine that includes: a chamber defined by an outer wall and forming a channel between windows defined through the outer wall toward a forward end of the chamber and at least one fuel injector positioned toward an aft end of the chamber; and a multilayer screen filter comprising at least two layers of screen over at least a portion of the windows and at least one layer of screen over the remaining portion of the windows. The windows include a forward end and a forward portion, and an aft end and an aft portion. The multilayer screen filter is positioned over the windows such that, in operation, a supply of compressed air entering the chamber through the windows passes through at least one layer of screen. The multilayer screen filter is configured such that the aft portion of the windows include at least two layers of screen, and the forward portion of the windows includes one less layer of screen than the aft portion of the windows.

  13. An improved visualization of diesel particulate filter/

    E-Print Network [OSTI]

    Boehm, Kevin (Kevin W.)

    2011-01-01

    The prevalence of diesel particulate filters (DPF) is increasing as emissions standards worldwide evolve to match current technologies. Since the first application of DPFs in the 1980's, PM trapping effectiveness has ...

  14. Ungulate Carcasses Perforate Ecological Filters and Create

    E-Print Network [OSTI]

    2007). Forest biodiversity, energy flow, nutrient cycling, and regeneration are significantly affectedUngulate Carcasses Perforate Ecological Filters and Create Biogeochemical Hotspots in Forest. Vucetich, Rolf O. Peterson, Joshua M. Shields, and Matthew D. Powers School of Forest Resources

  15. Optimization of tunable silicon compatible microring filters

    E-Print Network [OSTI]

    Amatya, Reja

    2008-01-01

    Microring resonators can be used as pass-band filters for wavelength division demultiplexing in electronic-photonic integrated circuits for applications such as analog-to-digital converters (ADCs). For high quality signal ...

  16. Electro-optical tunable birefringent filter

    DOE Patents [OSTI]

    Levinton, Fred M. (Princeton, NJ)

    2012-01-31

    An electrically tunable Lyot type filter is a Lyot that include one or more filter elements. Each filter element may have a planar, solid crystal comprised of a material that exhibits birefringence and is electro-optically active. Transparent electrodes may be coated on each face of the crystal. An input linear light polarizer may be located on one side of the crystal and oriented at 45 degrees to the optical axis of the birefringent crystal. An output linear light polarizer may be located on the other side of the crystal and oriented at -45 degrees with respect to the optical axis of the birefringent crystal. When an electric voltage is applied between the electrodes, the retardation of the crystal changes and so does the spectral transmission of the optical filter.

  17. Plasma Mass Filters For Nuclear Waste Reprocessing

    SciTech Connect (OSTI)

    Abraham J. Fetterman and Nathaniel J. Fisch

    2011-05-26

    Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

  18. Plasma Mass Filters For Nuclear Waste Reprocessing

    SciTech Connect (OSTI)

    Abraham J. Fetterman and Nathaniel J. Fisch

    2011-05-25

    Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

  19. Integrated electric alternators/active filters 

    E-Print Network [OSTI]

    Abolhassani, Mehdi Towliat

    2004-09-30

    In response to energy crisis and power quality concerns, three different methodologies to integrate the concept of active filtering into the alternators are proposed. Wind energy, due to its free availability and its clean and renewable character...

  20. Onsite Wastewater Treatment Systems: Sand Filters 

    E-Print Network [OSTI]

    Lesikar, Bruce J.

    2008-10-23

    Sand filters are beds of granular material, or sand, drained from underneath so that pretreated wastewater can be treated, collected and distributed to a land application system. This publication explains the treatment, design, operation...

  1. Emergency Filter for Low Pressure EGR

    Broader source: Energy.gov [DOE]

    This project uses CFD simulation and laboratory tests to design single- and multi-layer mesh as an EGR emergency filter to prevent combustion particles from passing back to the engine.

  2. Low Latency Stochastic Filtering Software Firewall Architecture 

    E-Print Network [OSTI]

    Ghoshal, Pritha

    2012-08-29

    firewall architecture which removes the sequential ACL lookup from the critical path and thus decreases the latency per packet in the common case. To accomplish this we implement a Bloom filter-based, stochastic pre-classification stage, enabling...

  3. Efficient implementation schemes for image enhancement filters 

    E-Print Network [OSTI]

    Yusuf, Khadem Mahmud

    1994-01-01

    Generalized median filtering techniques that have appeared in previous literature suffer from some severe disadvantages. They are not only hardware intensive and time consuming but also tend to smear image edges. These shortcomings can be overcome...

  4. Piezoelectric MEMS resonator characterization and filter design

    E-Print Network [OSTI]

    Kang, Joung-Mo, 1978-

    2004-01-01

    This thesis presents modeling and first measurements of a new piezoelectric MEMS resonator developed at Draper Laboratory. In addition, some simple filter designs incorporating the resonator with predicted performance ...

  5. Requirements from Particulate Filter Technology for Commercial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hot Gas Filtration of Fine and Ultra fine Particles with Liquid Phase Sintered SiC Ceramic DPF Evaluation of Passive and Active Soot Filters for Removal of Particulate...

  6. Logical Attestation: An Authorization Architecture

    E-Print Network [OSTI]

    Schneider, Fred B.

    , Credentials-Based Authorization 1. Introduction Secure coprocessors, such as industry standard Trusted

  7. Electrical diesel particulate filter (DPF) regeneration

    DOE Patents [OSTI]

    Gonze, Eugene V; Ament, Frank

    2013-12-31

    An exhaust system that processes exhaust generated by an engine includes a diesel particulate filter (DPF) that is disposed downstream of the engine and that filters particulates from the exhaust. An electrical heater is disposed upstream of the DPF and selectively heats the exhaust to initiate combustion of the particulates within the exhaust as it passes therethrough. Heat generated by combustion of the particulates induces combustion of particulates within the DPF.

  8. Author's personal copy 3-D simulation of particle filtration in electrospun nanofibrous filters

    E-Print Network [OSTI]

    Tafreshi, Hooman Vahedi

    a technique known as electrospinning (the term "nanofiber" is often used in practice for fibers with a fiber

  9. State authorization manual. Volume 1

    SciTech Connect (OSTI)

    Brugler-Jones, S.

    1990-10-01

    The State Authorization Manual (SAM) (Vol. I) provides guidance for States applying for program revisions to their authorized RCRA State program. The SAM is an updated version of the 1988 State Consolidated RCRA Authorization Manual (SCRAM). It focuses on program revision applications rather than initial applications since most States have received initial authorization for the RCRA program. The SCRAM should continue to be used to assist States not yet authorized under the RCRA program.

  10. Figure 1. Typical Slow Sand Filter Schematic Supernatant Water

    E-Print Network [OSTI]

    Figure 1. Typical Slow Sand Filter Schematic Headspace Supernatant Water Schmutzdecke Raw water for support and also at the bottom an underdrain system collects the filtered water (Figure 1). As water of SSFs to marginal source waters, filter harrowing and faster methods of filter scraping have greatly

  11. A Bit Too Precise? Bounded Verification of Quantized Digital Filters

    E-Print Network [OSTI]

    Chang, Bor-Yuh Evan

    and control systems. Errors in the filters can be catastrophic. Traditionally digital filters have been of digital filters. We design our comparison to re- veal the best possible approach towards verifying real-world designs of infinite impulse response (IIR) digital filters. Our study reveals broader insights into cases

  12. A Bit Too Precise? Bounded Verification of Quantized Digital Filters #

    E-Print Network [OSTI]

    Chang, Bor-Yuh Evan

    and control systems. Errors in the filters can be catastrophic. Traditionally digital filters have been of digital filters. We design our comparison to re­ veal the best possible approach towards verifying real­world designs of infinite impulse response (IIR) digital filters. Our study reveals broader insights into cases

  13. Electrically heated particulate matter filter with recessed inlet end plugs

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Ament, Frank (Troy, MI)

    2012-02-21

    A particulate matter (PM) filter includes filter walls having inlet ends and outlet ends. First adjacent pairs of the filter walls define inlet channels. Second adjacent pairs of the filter walls define outlet channels. Outlet end plugs are arranged in the inlet channels adjacent to the output ends. Inlet end plugs arranged in the outlet channels spaced from the inlet ends.

  14. Removal of residual particulate matter from filter media

    DOE Patents [OSTI]

    Almlie, Jay C; Miller, Stanley J

    2014-11-11

    A method for removing residual filter cakes that remain adhered to a filter after typical particulate removal methodologies have been employed, such as pulse-jet filter element cleaning, for all cleanable filters used for air pollution control, dust control, or powder control.

  15. Flattening filter removal for improved image quality of megavoltage fluoroscopy

    SciTech Connect (OSTI)

    Christensen, James D.; Kirichenko, Alexander; Gayou, Olivier

    2013-08-15

    Purpose: Removal of the linear accelerator (linac) flattening filter enables a high rate of dose deposition with reduced treatment time. When used for megavoltage imaging, an unflat beam has reduced primary beam scatter resulting in sharper images. In fluoroscopic imaging mode, the unflat beam has higher photon count per image frame yielding higher contrast-to-noise ratio. The authors’ goal was to quantify the effects of an unflat beam on the image quality of megavoltage portal and fluoroscopic images.Methods: 6 MV projection images were acquired in fluoroscopic and portal modes using an electronic flat-panel imager. The effects of the flattening filter on the relative modulation transfer function (MTF) and contrast-to-noise ratio were quantified using the QC3 phantom. The impact of FF removal on the contrast-to-noise ratio of gold fiducial markers also was studied under various scatter conditions.Results: The unflat beam had improved contrast resolution, up to 40% increase in MTF contrast at the highest frequency measured (0.75 line pairs/mm). The contrast-to-noise ratio was increased as expected from the increased photon flux. The visualization of fiducial markers was markedly better using the unflat beam under all scatter conditions, enabling visualization of thin gold fiducial markers, the thinnest of which was not visible using the unflat beam.Conclusions: The removal of the flattening filter from a clinical linac leads to quantifiable improvements in the image quality of megavoltage projection images. These gains enable observers to more easily visualize thin fiducial markers and track their motion on fluoroscopic images.

  16. Method of and apparatus for testing the integrity of filters

    DOE Patents [OSTI]

    Herman, R.L.

    1985-05-07

    A method of and apparatus are disclosed for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage. 5 figs.

  17. Methods of and apparatus for testing the integrity of filters

    DOE Patents [OSTI]

    Herman, R.L.

    1984-01-01

    A method of and apparatus for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstram upstream and downstream of such filter stage. Samples of the particel concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage.

  18. Method of and apparatus for testing the integrity of filters

    DOE Patents [OSTI]

    Herman, Raymond L [Richland, WA

    1985-01-01

    A method of and apparatus for testing the integrity of individual filters or filter stages of a multistage filtering system including a diffuser permanently mounted upstream and/or downstream of the filter stage to be tested for generating pressure differentials to create sufficient turbulence for uniformly dispersing trace agent particles within the airstream upstream and downstream of such filter stage. Samples of the particle concentration are taken upstream and downstream of the filter stage for comparison to determine the extent of particle leakage past the filter stage.

  19. Carbon fiber composite molecular sieve electrically regenerable air filter media

    DOE Patents [OSTI]

    Wilson, K.A.; Burchell, T.D.; Judkins, R.R.

    1998-10-27

    An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply air stream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium. 3 figs.

  20. Carbon fiber composite molecular sieve electrically regenerable air filter media

    DOE Patents [OSTI]

    Wilson, Kirk A. (Knoxville, TN); Burchell, Timothy D. (Oak Ridge, TN); Judkins, Roddie R. (Knoxville, TN)

    1998-01-01

    An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply airstream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium.

  1. Hydrocarbon-enhanced particulate filter regeneration via microwave ignition

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Brown, David B. (Brighton, MI)

    2010-02-02

    A regeneration method for a particulate filter includes estimating a quantity of particulate matter trapped within the particulate filter, comparing the quantity of particulate matter to a predetermined quantity, heating at least a portion of the particulate filter to a combustion temperature of the particulate matter, and introducing hydrocarbon fuel to the particulate filter. The hydrocarbon fuel facilitates combustion of the particulate matter to regenerate the particulate filter.

  2. Enter filename

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunities EnergyU.S.Engineering Metal(2) Cu (3)Enrico Rossi CollegeEMF

  3. Filtering Noisy ECG Signals Using the Extended Kalman Filter Based on a Modified Dynamic ECG Model

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of biomedical signal processing. Specifically, the extraction of ECG signals from low SNR measurementsFiltering Noisy ECG Signals Using the Extended Kalman Filter Based on a Modified Dynamic ECG Model University of Technology, Tehran, Iran 2 Images and Signals Laboratory, Institut National Polytechnique de

  4. Technical task plan for testing filter box sorbent-paint filter test

    SciTech Connect (OSTI)

    Kilpatrick, L.L.

    1993-09-01

    At the Savannah River Plant, High Level Waste Engineering (HLWE) asked Interim Waste Technology (IWT) to choose and test a sorbent to add to the ITP filter box that meets the EPA requirement for land disposal of containerized liquid hazardous wastes per Paint Filter Liquids (PFL) test method 9095. This report outlines the process to be used in accomplishing this task.

  5. Filter design for hybrid spin gates

    E-Print Network [OSTI]

    Andreas Albrecht; Martin B. Plenio

    2015-04-14

    The impact of control sequences on the environmental coupling of a quantum system can be described in terms of a filter. Here we analyze how the coherent evolution of two interacting spins subject to periodic control pulses, at the example of a nitrogen vacancy center coupled to a nuclear spin, can be described in the filter framework in both the weak and the strong coupling limit. A universal functional dependence around the filter resonances then allows for tuning the coupling type and strength. Originally limited to small rotation angles, we show how the validity range of the filter description can be extended to the long time limit by time-sliced evolution sequences. Based on that insight, the construction of tunable, noise decoupled, conditional gates composed of alternating pulse sequences is proposed. In particular such an approach can lead to a significant improvement in fidelity as compared to a strictly periodic control sequence. Moreover we analyze the decoherence impact, the relation to the filter for classical noise known from dynamical decoupling sequences, and we outline how an alternating sequence can improve spin sensing protocols.

  6. Elkhorn Slough Aerosol Sampler Filter Exchange Procedure The filters provided by the Paytan Lab will each have an ID number and an initial filter

    E-Print Network [OSTI]

    Paytan, Adina

    the filters into the blue cartridges: · record the sampling dates (start-end), · the filter ID, · the cartridge ID (located on the mesh screen), · whether it was placed under high or low flow (high flow = , low flow = ). To load the cartridge with a filter: · Open the cartridge using the silver separating tool

  7. Single-periodic-film optical bandpass filter

    E-Print Network [OSTI]

    Niraula, Manoj; Magnusson, Robert

    2015-01-01

    Resonant periodic surfaces and films enable new functionalities with wide applicability in practical optical systems. Their material sparsity, ease of fabrication, and minimal interface count provide environmental and thermal stability and robustness in applications. Here we report an experimental bandpass filter fashioned in a single patterned layer on a substrate. Its performance corresponds to bandpass filters requiring perhaps 30 traditional thin-film layers as shown by an example. We demonstrate an ultra-narrow, high-efficiency bandpass filter with extremely wide, flat, and low sidebands. This class of devices is designed with rigorous solutions of the Maxwell equations while engaging the physical principles of resonant waveguide gratings. The proposed technology is integration-friendly and opens doors for further development in various disciplines and spectral regions where thin-film solutions are traditionally applied.

  8. Filtered cathodic arc deposition apparatus and method

    DOE Patents [OSTI]

    Krauss, Alan R. (24461 W. Blvd. De John, Naperville, IL 60564)

    1999-01-01

    A filtered cathodic arc deposition method and apparatus for the production of highly dense, wear resistant coatings which are free from macro particles. The filtered cathodic arc deposition apparatus includes a cross shaped vacuum chamber which houses a cathode target having an evaporable surface comprised of the coating material, means for generating a stream of plasma, means for generating a transverse magnetic field, and a macro particle deflector. The transverse magnetic field bends the generated stream of plasma in the direction of a substrate. Macro particles are effectively filtered from the stream of plasma by traveling, unaffected by the transverse magnetic field, along the initial path of the plasma stream to a macro particle deflector. The macro particle deflector has a preformed surface which deflects macro particles away from the substrate.

  9. Hot gas filter and system assembly

    DOE Patents [OSTI]

    Lippert, Thomas Edwin (Murrysville, PA); Palmer, Kathryn Miles (Monroeville, PA); Bruck, Gerald Joseph (Murrysville, PA); Alvin, Mary Anne (Pittsburgh, PA); Smeltzer, Eugene E. (Export, PA); Bachovchin, Dennis Michael (Murrysville, PA)

    1999-01-01

    A filter element for separating fine dirty particles from a hot gas. The filter element comprises a first porous wall and a second porous wall. Each porous wall has an outer surface and an inner surface. The first and second porous walls being coupled together thereby forming a substantially closed figure and open at one end. The open end is formed to be coupled to a hot gas clean up system support structure. The first and second porous walls define a channel beginning at the open end and terminate at the closed end through which a filtered clean gas can flow through and out into the clean gas side of a hot gas clean up system.

  10. Hot gas filter and system assembly

    DOE Patents [OSTI]

    Lippert, T.E.; Palmer, K.M.; Bruck, G.J.; Alvin, M.A.; Smeltzer, E.E.; Bachovchin, D.M.

    1999-08-31

    A filter element is described for separating fine dirty particles from a hot gas. The filter element comprises a first porous wall and a second porous wall. Each porous wall has an outer surface and an inner surface. The first and second porous walls being coupled together thereby forming a substantially closed figure and open at one end. The open end is formed to be coupled to a hot gas clean up system support structure. The first and second porous walls define a channel beginning at the open end and terminate at the closed end through which a filtered clean gas can flow through and out into the clean gas side of a hot gas clean up system. 8 figs.

  11. Methylmercury enters an aquatic food web through acidophilic microbial mats in Yellowstone National

    E-Print Network [OSTI]

    Tomberlin, Jeff

    Methylmercury enters an aquatic food web through acidophilic microbial mats in Yellowstone National the extreme environments in Yellowstone National Park (YNP), WY, USA. Little is known of their role in food webs that exist in the Park's geothermal habitats. Eukaryotic green algae associated

  12. ECOLOGY, EVOLUTION AND ENVIRONMENTAL BIOLOGY (for students entering Biology in Fall 2011 or later)

    E-Print Network [OSTI]

    Kihara, Daisuke

    Environmental Issues (3 cr.; fall) BIOL 49300 Intro. to Ethology (3 cr.; fall) FNR 50100 Limnology (3 cr.; fall Analysis (3 cr.; spring) POL 52300 Environmental Politics and Public Policy (3 cr.; fall) BIOL 59700 SexECOLOGY, EVOLUTION AND ENVIRONMENTAL BIOLOGY (for students entering Biology in Fall 2011 or later

  13. Creating a Journal Article This cheatsheet will explain how to enter a Journal Article into IRMA.

    E-Print Network [OSTI]

    Creating a Journal Article This cheatsheet will explain how to enter a Journal Article into IRMA (MAIS ID (Staff, Student or MAIS other number)) and MAIS Password. Creating new journal article record) In the Publication Output field, click to choose Journal. Have a look at the table below to work out which

  14. Introduction It is estimated that 60 to 70% of LLDPE enters the

    E-Print Network [OSTI]

    Hussein, Ibnelwaleed A.

    ). Blends of PE/PE components show a quite di- verse range of behavior as discussed below. BlendsIntroduction It is estimated that 60 to 70% of LLDPE enters the market as blends (Utracki 1989a history of poly- ethylene (PE) blending and its widespread use, many questions about the homogeneity

  15. Music Theory Music theory majors often enter Stetson pursuing a different music-

    E-Print Network [OSTI]

    Miles, Will

    Music Theory Music theory majors often enter Stetson pursuing a different music- emphasis major of music. From the masterful counterpoint of J.S. Bach to the contemporary writings of Sydney Hodkinson, all music majors in theory receive thorough training in theories of tonal and contemporary music

  16. iD Tech needs your help to inspire more young women to enter the

    E-Print Network [OSTI]

    Oviedo, Néstor J.

    -18 as well as a new all-girls option (Alexa Café for ages 10-15). At Alexa Café, we also emphasize techiD Tech needs your help to inspire more young women to enter the tech industry and make their voices and ideas heard. iD Tech is determined to help reshape the face of the tech industry by providing

  17. WHAT IS CLIMATE CHANGE? We have left the Holocene and entered a new epoch, the

    E-Print Network [OSTI]

    Baez, John

    WHAT IS CLIMATE CHANGE? #12;We have left the Holocene and entered a new epoch, the Anthropocene, climate change is part of a more significant challenge: adapting to the Anthropocene. We can expect, when the biosphere is rapidly changing due to human activities. Global warming is just part

  18. How to apply the NIH/HHS Salary Cap and enter it into Kuali Coeus

    E-Print Network [OSTI]

    Weber, David J.

    How to apply the NIH/HHS Salary Cap and enter it into Kuali Coeus · The NIH/HHS Salary cap is :ed to the Federal Execu:ve Level II salary Level. hAp://grants2.nih.gov/grants/policy/salcap_summary.htm · The Salary cap applies to NIH

  19. Secondary Pollutants from Ozone Reaction with Ventilation Filters and Degradation of Filter Media Additives

    SciTech Connect (OSTI)

    Destaillats, Hugo; Chen, Wenhao; Apte, Michael; Li, Nuan; Spears, Michael; Almosni, Jérémie; Brunner, Gregory; Zhang, Jianshun (Jensen); Fisk, William J.

    2011-05-01

    Prior research suggests that chemical processes taking place on the surface of particle filters employed in buildings may lead to the formation of harmful secondary byproducts. We investigated ozone reactions with fiberglass, polyester, cotton/polyester and polyolefin filter media, as well as hydrolysis of filter media additives. Studies were carried out on unused media, and on filters that were installed for 3 months in buildings at two different locations in the San Francisco Bay Area. Specimens from each filter media were exposed to {approx}150 ppbv ozone in a flow tube under a constant flow of dry or humidified air (50percent RH). Ozone breakthrough was recorded for each sample over periods of {approx}1000 min; the ozone uptake rate was calculated for an initial transient period and for steady-state conditions. While ozone uptake was observed in all cases, we did not observe significant differences in the uptake rate and capacity for the various types of filter media tested. Most experiments were performed at an airflow rate of 1.3 L/min (face velocity = 0.013 m/s), and a few tests were also run at higher rates (8 to 10 L/min). Formaldehyde and acetaldehyde, two oxidation byproducts, were quantified downstream of each sample. Those aldehydes (m/z 31 and 45) and other volatile byproducts (m/z 57, 59, 61 and 101) were also detected in real-time using Proton-Transfer Reaction - Mass Spectrometry (PTR-MS). Low-ppbv byproduct emissions were consistently higher under humidified air than under dry conditions, and were higher when the filters were loaded with particles, as compared with unused filters. No significant differences were observed when ozone reacted over various types of filter media. Fiberglass filters heavily coated with impaction oil (tackifier) showed higher formaldehyde emissions than other samples. Those emissions were particularly high in the case of used filters, and were observed even in the absence of ozone, suggesting that hydrolysis of additives, rather than ozonolysis, is the main formaldehyde source in those filters. Emission rates of formaldehyde and acetaldehyde were not found to be large enough to substantially increase indoor concentrations in typical building scenarios. Nevertheless, ozone reactions on HVAC filters cannot be ignored as a source of low levels of indoor irritants.

  20. METAL MEDIA FILTERS, AG-1 SECTION FI

    SciTech Connect (OSTI)

    Adamson, D.

    2012-05-23

    One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures, media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, data was lacking to complete an AG-1 FI Standard on metal media. With funding secured by Mississippi State University (MSU) from National Nuclear Security Administration (NNSA), a research test stand is being designed and fabricated at MSU's Institute for Clean Energy Technology (ICET) Facility to obtain qualification data on metal media. This in turn will support required data needed for the FI Standard. The paper will discuss in detail how the test stand at MSU will obtain the necessary data to complete the FI Standard.

  1. Plasma filtering techniques for nuclear waste remediation

    E-Print Network [OSTI]

    Gueroult, Renaud; Fisch, Nathaniel J

    2015-01-01

    Nuclear waste cleanup is challenged by the handling of feed stocks that are both unknown and complex. Plasma filtering, operating on dissociated elements, offers advantages over chemical methods in processing such wastes. The costs incurred by plasma mass filtering for nuclear waste pretreatment, before ultimate disposal, are similar to those for chemical pretreatment. However, significant savings might be achieved in minimizing the waste mass. This advantage may be realized over a large range of chemical waste compositions, thereby addressing the heterogeneity of legacy nuclear waste.

  2. Quantum Noise Filtering via Cross-Correlations

    E-Print Network [OSTI]

    Boaz Tamir; Eliahu Cohen

    2015-04-04

    Motivated by successful classical models for noise reduction, we suggest a quantum technique for filtering noise out of quantum states. The purpose of this paper is twofold: presenting a simple construction of quantum cross-correlations between two wave-functions, and presenting a scheme for a quantum noise filtering. We follow a well-known scheme in classical communication theory that attenuates random noise, and show that one can build a quantum analog by using non-trace-preserving operators. By this we introduce a classically motivated signal processing scheme to quantum information theory, which can help reducing quantum noise, and particularly, phase flip noise.

  3. Electrically heated particulate filter using catalyst striping

    DOE Patents [OSTI]

    Gonze, Eugene V; Paratore, Jr., Michael J; Ament, Frank

    2013-07-16

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine. A grid of electrically resistive material is applied to an exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF. A catalyst coating is applied to the PF that increases a temperature of the combustion of the particulates within the PF.

  4. Electrically heated particulate filter with reduced stress

    DOE Patents [OSTI]

    Gonze, Eugene V.

    2013-03-05

    A system comprises a particulate matter (PM) filter comprising an inlet for receiving exhaust gas. A zoned heater is arranged in the inlet and comprises a resistive heater comprising N zones, where N is an integer greater than one. Each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates others of the N zones.

  5. Electrically heated particulate filter enhanced ignition strategy

    DOE Patents [OSTI]

    Gonze, Eugene V; Paratore, Jr., Michael J

    2012-10-23

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine. A grid of electrically resistive material is applied to an exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF. A catalyst coating applied to at least one of the PF and the grid. A control module estimates a temperature of the grid and controls the engine to produce a desired exhaust product to increase the temperature of the grid.

  6. A monolithic polarization-independent frequency-filter system for filtering of photon pairs

    SciTech Connect (OSTI)

    Ahlrichs, Andreas; Berkemeier, Christoph; Sprenger, Benjamin; Benson, Oliver [Institute of Physics, Humboldt-Universität zu Berlin, Newtonstrasse 15, D-12489 Berlin (Germany)] [Institute of Physics, Humboldt-Universität zu Berlin, Newtonstrasse 15, D-12489 Berlin (Germany)

    2013-12-09

    We set up a long-term stable filtering system that consists of cascaded monolithic Fabry-Pérot filters to enhance the suppression and free spectral range. An effective free spectral range of hundreds of GHz allows the system to be used as a high resolution monochromator, with a linewidth of 192 MHz. As an important application a single mode is filtered from photon pairs generated by a parametric down-conversion source, and their indistinguishability is proven by measuring the Hong-Ou-Mandel effect with a visibility of 96%. We report that undesired birefringence, which is often encountered with monolithic cavities, can be avoided by stress-free mounting.

  7. Preliminary studies to determine the shelf life of HEPA filters

    SciTech Connect (OSTI)

    Gilbert, H.; Fretthold, J.K.; Rainer, F.; Bergman, W.; Beason, D.

    1994-07-18

    We have completed a preliminary study using filter media tests and filter qualification tests to investigate the effect of shelf-life on HEPA filter performance. Our media studies showed that the tensile strength decreased with age, but the data were not sufficient to establish a shelf-life. Thermogravimetric analyses demonstrated that one manufacturer had media with low tensile strength due to insufficient binder. The filter qualification tests (heated air and overpressure) conducted on different aged filters showed that filter age is not the primary factor affecting filter performance; materials and the construction design have a greater effect. An unexpected finding of our study was that sub-standard HEPA filters have been installed in DOE facilities despite existing regulations and filter qualification tests. We found that the filter with low tensile strength failed the overpressure test. The same filter had passed the heated air test, but left the filter so structurally weak, it was prone to blowout. We recommend that DOE initiate a filter qualification program to prevent this occurrence.

  8. Particle Filter with Swarm Move for Optimization

    E-Print Network [OSTI]

    Yang, Shengxiang

    method in particle swarm optimization (PSO). In this way, the PSO update equation is treated the ability of PSO in searching the optimal position can be embedded into the particle filter optimization in both convergence speed and final fitness in comparison with the PSO algorithm over a set of standard

  9. ELEC 225: Lab 5 Low Pass Filters

    E-Print Network [OSTI]

    Kozick, Richard J.

    frequencies than at high frequencies is a low-pass filter. A circuit that has a larger output at high generator for sine-wave output with an amplitude of 2V peak-to-peak. Connect Channel 1 of the `scope to measure the output of the function generator. Connect Channel 2 to measure the voltage across

  10. Filtering and parameter estimation for electricity

    E-Print Network [OSTI]

    Fournier, John J.F.

    Filtering and parameter estimation for electricity markets by Alberto Molina-Escobar B to be particularly difficult for electricity, where markets are complex, and ex- hibit a number of unique features, mainly due to the problems involved in storing electricity. In this thesis we propose three models

  11. NIST HANDBOOK 150-2 SUPPLEMENTAL CHECKLIST FOR ILAC-P14:12/2010 (2012-01-17) PAGE 1 OF 3 Enter Date: Enter NVLAP Lab Code

    E-Print Network [OSTI]

    NIST HANDBOOK 150-2 SUPPLEMENTAL CHECKLIST FOR ILAC-P14:12/2010 (2012-01-17) PAGE 1 OF 3 Enter Date: Enter NVLAP Lab Code: NVLAP CALIBRATION LABORATORIES SUPPLEMENTAL CHECKLIST for VERIFICATION: NVLAP LAB CODE: NIST HANDBOOK 150-2 SUPPLEMENTAL CHECKLIST FOR ILAC-P14:12/2010 (2012-01-17) PAGE 2 OF 3

  12. Monolithic Frequency Filter Designs Bsed On A Sampled-Data Analogue Wave Filter Approach 

    E-Print Network [OSTI]

    Reekie, Henry M

    Frequency filters are widely used in communications systems today. Historically they have been constructed from inductors, capacitors and resistors and such circuits are well understood. However they suffer from the ...

  13. Secondary Pollutants from Ozone Reaction with Ventilation Filters and Degradation of Filter Media Additives

    E-Print Network [OSTI]

    Destaillats, Hugo

    2012-01-01

    used in LBNL, exposed to 150 ppb ozone at two different flowMendell, 2008. Outdoor ozone and building-related symptomsAir filter materials, outdoor ozone and building-related

  14. Partial-Flow Diesel Particulate Filter of Sintered Metal Fiber...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partial-Flow Diesel Particulate Filter of Sintered Metal Fiber Fleece Partial-Flow Diesel Particulate Filter of Sintered Metal Fiber Fleece Poster presented at the 16th Directions...

  15. High performance continuous-time filters for information transfer systems 

    E-Print Network [OSTI]

    Mohieldin, Ahmed Nader

    2004-09-30

    large numbers of OpAmps. Similarly the development of integrated operational transconductance amplifier (OTA) led to new filter configurations. This gave rise to OTA-C filters, using only active devices and capacitors, making it more suitable...

  16. Design of discrete-time filters for efficient implementation

    E-Print Network [OSTI]

    Wei, Dennis

    2011-01-01

    The cost of implementation of discrete-time filters is often strongly dependent on the number of non-zero filter coefficients or the precision with which the coefficients are represented. This thesis addresses the design ...

  17. Ozone Removal by Filters Containing Activated Carbon: A Pilot Study

    E-Print Network [OSTI]

    Fisk, William

    2012-01-01

    in the air upstream and downstream of the filters.were also measured upstream and downstream of a “reference”in the air upstream and downstream of the filters. For

  18. Tracking moving radar targets with parallel, velocity-tuned filters

    DOE Patents [OSTI]

    Bickel, Douglas L.; Harmony, David W.; Bielek, Timothy P.; Hollowell, Jeff A.; Murray, Margaret S.; Martinez, Ana

    2013-04-30

    Radar data associated with radar illumination of a movable target is processed to monitor motion of the target. A plurality of filter operations are performed in parallel on the radar data so that each filter operation produces target image information. The filter operations are defined to have respectively corresponding velocity ranges that differ from one another. The target image information produced by one of the filter operations represents the target more accurately than the target image information produced by the remainder of the filter operations when a current velocity of the target is within the velocity range associated with the one filter operation. In response to the current velocity of the target being within the velocity range associated with the one filter operation, motion of the target is tracked based on the target image information produced by the one filter operation.

  19. Durability of Diesel Engine Particulate Filters CRADA No. ORNL...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filters CRADA No. ORNL-04-0692 with Cummins Inc. Durability of Diesel Engine Particulate Filters CRADA No. ORNL-04-0692 with Cummins Inc. Presentation from the U.S. DOE Office of...

  20. Asymmetric injection of cathodic arc plasma into a macroparticle filter

    E-Print Network [OSTI]

    Anders, Andre; MacGill, Robert A.

    2004-01-01

    setup. The cathodic arc plasma source is flange-mounted andfirewall" twist filter arc plasma source F IG. 1 Current (A)Injection of Cathodic Arc Plasma into a Macroparticle Filter

  1. Diesel Particulate Filters and NO2 Emission Limits | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filters and NO2 Emission Limits Diesel Particulate Filters and NO2 Emission Limits EPAs New air quality standards for NO2 will impact future DPF designs deer09ibrahim.pdf More...

  2. PARAMETRICALLY-EXCITED MICROELECTROMECHANICAL OSCILLATORS WITH FILTERING CAPABILITIES

    E-Print Network [OSTI]

    Shaw, Steven W.

    This thesis investigates a class of tunable microelectromechanical (MEM) oscillators that can be implemented#12;PARAMETRICALLY-EXCITED MICROELECTROMECHANICAL OSCILLATORS WITH FILTERING CAPABILITIES PARAMETRICALLY-EXCITED MICROELECTROMECHANICAL OSCILLATORS WITH FILTERING CAPABILITIES By Jeffrey Frederick Rhoads

  3. Simple time-variant filtering by operator scaling

    E-Print Network [OSTI]

    Park, Choon Byong; Black, Ross A.

    1995-09-01

    A convolutional method of time?variant, band?pass filtering presented shows that a change of filter cutoff frequencies with time is achieved by frequency scaling the amplitude spectrum of a reference operator. According to the scaling property...

  4. Integrated optical filters using Bragg gratings and resonators

    E-Print Network [OSTI]

    Khan, Mohammad Jalal

    2002-01-01

    This thesis provides an in-depth study of optical filters made using integrated Bragg gratings and Bragg resonators. Various topologies for making add/drop filters using integrated gratings are outlined. Each class of ...

  5. On-Site Wastewater Treatment Systems: Trickling Filter 

    E-Print Network [OSTI]

    Lesikar, Bruce J.

    2000-02-04

    A trickling filter is a bed of gravel or plastic media over which pretreated wastewater is sprayed. This publication explains how trickling filters treat wastewater and gives tips on how to maintain them....

  6. Ozone Removal by Filters Containing Activated Carbon: A Pilot Study

    E-Print Network [OSTI]

    Fisk, William

    2012-01-01

    carbon filters for the control of ozone, sulfur dioxide, andMendell (2008). "Outdoor ozone and building-related symptomsAir filter materials, outdoor ozone and building-related

  7. Biomimetic cochlea filters : from modelling, design to analogue VLSI implementation 

    E-Print Network [OSTI]

    Wang, Shiwei

    2014-11-27

    This thesis presents a novel biomimetic cochlea filter which closely resembles the biological cochlea behaviour. The filter is highly feasible for analogue very-large-scale integration (VLSI) circuits, which leads to a ...

  8. Multiple Sclerosis Journal The Author(s) 2013

    E-Print Network [OSTI]

    Gaser, Christian

    Multiple Sclerosis Journal 0(0) 1­8 © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav DOI: 10.1177/1352458513478673 msj.sagepub.com MULTIPLE SCLEROSIS MSJ JOURNAL Introduction (MRIs) are the most striking finding in multiple sclerosis (MS) and they have become the most important

  9. Predicting Job Salaries from Text Descriptions Anonymous Author(s)

    E-Print Network [OSTI]

    Freitas, Nando de

    050 051 052 053 Predicting Job Salaries from Text Descriptions Anonymous Author(s) Affiliation Address descriptions of the posted jobs. Many listings provide a salary, but as many as half do not. For those listings that do not provide a salary, it is useful to predict a salary based on the description of that job. We

  10. FAQ for Case Study Authors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reviews FAQ for Case Study Authors Science Engagement Move your data Programs & Workshops Science Requirements Reviews Network Requirements Reviews Documents and Background...

  11. Electrically heated particulate filter propagation support methods and systems

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-06-07

    A control system that controls regeneration of a particulate filter is provided. The system generally includes a regeneration module that controls current to the particulate filter to initiate combustion of particulate matter in the particulate filter. A propagation module estimates a propagation status of the combustion of the particulate matter based on a combustion temperature. A temperature adjustment module controls the combustion temperature by selectively increasing a temperature of exhaust that passes through the particulate filter.

  12. Results from tests of DuPont crossflow filter

    SciTech Connect (OSTI)

    Steimke, J.L.

    2000-05-05

    Crossflow filtration will be used to filter radioactive waste slurry as part of the Late Wash Process.

  13. Creating a Journal Article Record This user guide will explain how to enter a Journal Article into IRMA.

    E-Print Network [OSTI]

    Creating a Journal Article Record This user guide will explain how to enter a Journal Article" to log into IRMA CREATING A JOURNAL ARTICLE RECORD: 1) After logging on, you should see something like entering a new Publication record. 4) In the Publication Output field, click to choose Journal. Have a look

  14. Course Registration Schedule Fall 2014 http://www.dartmouth.edu/~reg/guides/csel/csel_student_entering.html

    E-Print Network [OSTI]

    Shepherd, Simon

    . Step 6: Submit Changes Step 2: Select the appropriate term Step 3: Search for Courses using the CourseCourse Registration Schedule Fall 2014 http://www.dartmouth.edu/~reg/guides/csel/csel_student_entering.html Course Registration Quick Reference Guide: Entering Students Visual Guide Step 1: Access Banner

  15. HARDWARE IMPLEMENTATION OF THE MEDIANRATIONAL HYBRID FILTERS FOR COLOUR IMAGES

    E-Print Network [OSTI]

    Gabbouj, Moncef

    ­mail: bernac@ipl.univ.trieste.it ABSTRACT A new class of nonlinear Filters called Vector Median Rational Hybrid], and of the Directional­Distance Filter (DDF), reported in [4]. In this paper we also present a hardware implementation in FPGA's. Since implementations of the median filter are widely #12; reported in literature, in this work

  16. Exact Expectation Analysis of the LMS Adaptive Filter \\Lambda

    E-Print Network [OSTI]

    Douglas, Scott C.

    Exact Expectation Analysis of the LMS Adaptive Filter \\Lambda Scott C. Douglas y and Weimin Pan analyses of the least­mean­square (LMS) adaptive filter, it is assumed that the filter coefficients that can be used to predict the exact statistical behavior of a finite­impulse­response (FIR) LMS adaptive

  17. Photonic microwave bandpass filter with improved dynamic range

    E-Print Network [OSTI]

    Yao, Jianping

    Photonic microwave bandpass filter with improved dynamic range Yu Yan and Jianping Yao* Microwave A technique to improve the dynamic range of a photonic microwave bandpass filter is proposed and experi. The dynamic range of the photonic microwave bandpass filter is increased by reducing the optical

  18. A TOWED PUMP AND SHIPBOARD FILTERING SYSTEM FOR SAMPLING

    E-Print Network [OSTI]

    ;452: A TOWED PUMP AND SHIPBOARD FILTERING SYSTEM FOR SAMPLING SMALL ZOOPLANKTERS ,.^^»»r, Commissioner BUREAU OF Commercial Fisheries, Donald L. McKernan, Director A TOWED PUMP AND SHIPBOARD FILTERING Performance 13 Discussion 17 Summary 18 Literature cited 19 111 #12;#12;A TOWED PUMP AND SHIPBOARD FILTERING

  19. Matrix-Valued Filters as Convex Programs Martin Welk1

    E-Print Network [OSTI]

    Heermann, Dieter W.

    Matrix-Valued Filters as Convex Programs Martin Welk1 , Florian Becker2 , Christoph Schn¨orr2@uni-mannheim.de http://www.cvgpr.uni-mannheim.de Abstract. Matrix-valued images gain increasing importance both for robust and efficient filters for such images. Recently, a median filter for matrix-valued images has been

  20. A Hybrid RNS Adaptive Filter for Channel Equalization

    E-Print Network [OSTI]

    A Hybrid RNS Adaptive Filter for Channel Equalization G.L. Bernocchi, G.C. Cardarilli, A. Del Re, A-- In this work a hybrid Residue Number System (RNS) implementation of an adaptive FIR filter is presented or echo cancellation). In the literature, it has been shown that the RNS implementation of FIR filters

  1. Filter holder assembly having extended collar spacer ring

    DOE Patents [OSTI]

    Alvin, Mary Anne (Pittsburgh, PA); Bruck, Gerald J. (Murrysville, PA)

    2002-01-01

    A filter holder assembly is provided that utilizes a fail-safe regenerator unit with an annular spacer ring having an extended metal collar for containment and positioning of a compliant ceramic gasket used in the assembly. The filter holder assembly is disclosed for use with advanced composite, filament wound, and metal candle filters.

  2. Centrifugal Filter Devices for the Concentration and Purification of

    E-Print Network [OSTI]

    Lebendiker, Mario

    Centrifugal Filter Devices for the Concentration and Purification of Biological Samples  Amicon Ultra Ready for an evolution? ® #12;The next stage in centrifugal filter devices. The introduction of Amicon Ultra sets a new standard for centrifugal filter devices. This high performance ultrafiltration

  3. Electrically heated particulate filter preparation methods and systems

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2012-01-31

    A control system that controls regeneration of a particulate filter is provided. The system generally includes a fuel control module that controls injection of fuel into exhaust that passes through the particulate filter. A regeneration module controls current to the particulate filter to initiate regeneration after the fuel has been injected into the exhaust.

  4. Optimizing performance of ceramic pot filters in Northern Ghana and modeling flow through paraboloid-shaped filters/

    E-Print Network [OSTI]

    Miller, Travis Reed

    2010-01-01

    This work aimed to inform the design of ceramic pot filters to be manufactured by the organization Pure Home Water (PHW) in Northern Ghana, and to model the flow through an innovative paraboloid-shaped ceramic pot filter. ...

  5. Generalized entering coefficients: A criterion for foam stability against oil in porous media

    SciTech Connect (OSTI)

    Bergeron, V.; Fagan, M.E.; Radke, C.J.

    1993-09-01

    The unique mobility-control properties of foam in porous media make it an attractive choice as an injection fluid for enhanced oil recovery. Unfortunately, in many cases oil has a major destabilizing effect on foam. Therefore, it is important to understand how oil destabilizes foam and what surfactant properties lead to increased stability against oil. To explain the stability of foam in porous media in the presence of oil, we generalize the ideas of spreading and entering behavior using Frumkin-Deryaguin wetting theory. This formulation overcomes the inherent deficiencies in the classical spreading and entering coefficients used to explain foam stability against oil. We find that oil-tolerant foam can be produced by making the oil surface ``water wet``. To test our theoretical ideas, we measure foam-flow resistance through 45--70 {mu}m glass beadpacks, surface and interfacial tensions, and disjoining pressure isotherms for foam and pseudoemulsion films for a variety of surfactant/oil systems. Most notably, we measure pseudoemulsion-film disjoining pressure isotherms for the first time and directly establish that pseudoemulsion film stability controls the stability of the foam in the systems we tested. Moreover, we demonstrate the correspondence between stable pseudoemulsion films, negative entering behavior, and oil-tolerant foams.

  6. Author's personal copy Cosmogenic 7

    E-Print Network [OSTI]

    Usoskin, Ilya G.

    Author's personal copy Cosmogenic 7 Be and 22 Na in Finland: Production, observed periodicities a Radiation and Nuclear Safety Authority, Regional Laboratory in Northern Finland, Rovaniemi, Finland b Sodankyl¨a Geophysical Observatory, Oulu Unit, University of Oulu, Finland c Ioffe Physical

  7. Waste Management Coordinating Lead Authors

    E-Print Network [OSTI]

    Columbia University

    10 Waste Management Coordinating Lead Authors: Jean Bogner (USA) Lead Authors: Mohammed Abdelrafie Ahmed, C. Diaz, A. Faaij, Q. Gao, S. Hashimoto, K. Mareckova, R. Pipatti, T. Zhang, Waste Management University Press, Cambridge, United Kingdom and New York, NY, USA. #12;586 Waste Management Chapter 10 Table

  8. Enhanced Organic Precursor Removals Using "Aged" Filter Media Page 1 Enhanced Organic Precursor Removals Using "Aged" Filter Media

    E-Print Network [OSTI]

    OH. Fresh buffered water and influent solution were prepared prior to each filter challenge. C. CoagulatedEnhanced Organic Precursor Removals Using "Aged" Filter Media Page 1 Enhanced Organic Precursor Removals Using "Aged" Filter Media O b j e c t i v e s The main goals of this project was to evaluate

  9. Overlap zoned electrically heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Chapman, Mark R [Brighton, MI

    2011-07-19

    A system includes a particulate matter (PM) filter that includes an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than or equal to one, and wherein the N zones and the M sub-zones are arranged in P layers, where P is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  10. Filtered venting considerations in the United States

    SciTech Connect (OSTI)

    Dallman, R.J.; Hulman, L.G.; Kudrick, J.

    1988-01-01

    The capability to vent with or without attenuation of fission products exists at some US facilities. In addition, two utilities have proposed enhanced capabilities, and generic enhancements are being considered under a regulatory evaluation of severe accident vulnerabilities at all US commercial reactors. The paper 1) summarizes the history of filtered venting in the US including significant past and proposed related research; 2) summarizes an assessment of the positive and negative safety aspects of venting for a class of 24 US reactors (BWR Mark I), and 3) discusses the regulatory assessments being made of filtered venting as a severe accident management strategy, including potential attributes of both accident prevention and mitigation associated with venting. Lastly, based on a review of available literature on European initiatives, questions are raised; answers to which would significantly help US evaluations. 10 refs., 2 tabs.

  11. Process for making ceramic hot gas filter

    DOE Patents [OSTI]

    Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

    2001-01-01

    A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

  12. Compact cyclone filter train for radiological and hazardous environments

    DOE Patents [OSTI]

    Bench, T.R.

    1998-04-28

    A compact cyclone filter train is disclosed for the removal of hazardous and radiological particles from a gaseous fluid medium. This filter train permits a small cyclone separator to be used in a very small space envelope due to the arrangement of the filter housing adjacent to the separator with the cyclone separator and the filters mounted on a plate. The entire unit will have a hoist connection at the center of gravity so that the entire unit including the separator, the filters, and the base can be lifted and repositioned as desired. 3 figs.

  13. Method of treating contaminated HEPA filter media in pulp process

    DOE Patents [OSTI]

    Hu, Jian S.; Argyle, Mark D.; Demmer, Ricky L.; Mondok, Emilio P.

    2003-07-29

    A method for reducing contamination of HEPA filters with radioactive and/or hazardous materials is described. The method includes pre-processing of the filter for removing loose particles. Next, the filter medium is removed from the housing, and the housing is decontaminated. Finally, the filter medium is processed as pulp for removing contaminated particles by physical and/or chemical methods, including gravity, flotation, and dissolution of the particles. The decontaminated filter medium is then disposed of as non-RCRA waste; the particles are collected, stabilized, and disposed of according to well known methods of handling such materials; and the liquid medium in which the pulp was processed is recycled.

  14. Authority and Review Chart Exhibit A R = REVIEW A = AUTHORITY

    E-Print Network [OSTI]

    Zhou, Yuanyuan

    Authority and Review Chart Exhibit A R = REVIEW A = AUTHORITY ¹ OFF-SCALE NOT HANDLED PER POLICY Chancellor Academic Affairs ASST PROF (LRF, In Residence, Clinical X) Appointment R R R³ R R R R R4 R A Merit/ Reappointment A A³ R A R A Merit with off-scale salary increase R R³ R R R R R A Merit with 6th Year Market os

  15. Generator powered electrically heated diesel particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V; Paratore, Jr., Michael J

    2014-03-18

    A control circuit for a vehicle powertrain includes a switch that selectivity interrupts current flow between a first terminal and a second terminal. A first power source provides power to the first terminal and a second power source provides power to the second terminal and to a heater of a heated diesel particulate filter (DPF). The switch is opened during a DPF regeneration cycle to prevent the first power source from being loaded by the heater while the heater is energized.

  16. Analysis of characteristic of microwave regeneration for diesel particulate filter

    SciTech Connect (OSTI)

    Ning Zhi; Zhang Guanglong; Lu Yong; Liu Junmin; Gao Xiyan; Liang Iunhui; Chen Jiahua [Dalian Univ. of Technology (China)

    1995-12-31

    The mathematical model for the microwave regeneration of diesel particulate filter is proposed according to the characteristic of microwave regeneration process. The model is used to calculate the temperature field, distribution of particulate and density field of oxygen in the filter during the process of regeneration with typical ceramic foam particulate filter data. The parametric study demonstrates how some of the main parameters, such as microwave attenuation constant of the filter, filter particulate loading, the power and distribution of microwave energy and so on, affect the efficiency of regeneration, the maximum filter temperature and regeneration duration. The results show that it is possible to regenerate the diesel particulate filters in certain conditions by using microwave energy. This paper can give one a whole understanding to several main factors that have effects on the process of microwave regeneration and provide a theoretical basis for the optimal design of the microwave regeneration system.

  17. Emergency sacrificial sealing method in filters, equipment, or systems

    DOE Patents [OSTI]

    Brown, Erik P

    2014-09-30

    A system seals a filter or equipment component to a base and will continue to seal the filter or equipment component to the base in the event of hot air or fire. The system includes a first sealing material between the filter or equipment component and the base; and a second sealing material between the filter or equipment component and the base and proximate the first sealing material. The first sealing material and the second seal material are positioned relative to each other and relative to the filter or equipment component and the base to seal the filter or equipment component to the base and upon the event of fire the second sealing material will be activated and expand to continue to seal the filter or equipment component to the base in the event of hot air or fire.

  18. AUTHORITY

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u t y A s sconveyance of9,Septemeber 19, 2014

  19. Collaborative Authoring of Walden's Paths 

    E-Print Network [OSTI]

    Li, Yuanling

    2012-10-19

    The World Wide Web contains rich collections of digital materials that can be used in education and learning settings. The collaborative authoring prototype of Walden's Paths targets two groups of users: educators and ...

  20. Author Order and Research Quality

    E-Print Network [OSTI]

    Kissan, Joseph; Laband, David N.; Patil, Vivek

    2005-01-01

    We observe a great deal of heterogeneity in the manner in which author orderings are assigned both across and within academic markets. To better understand this phenomenon, we develop and analyze a stochastic model of ...

  1. Danish Energy Authority Final report

    E-Print Network [OSTI]

    1 Danish Energy Authority Final report Kaliningrad Regional District Heating Network 2004 - 2006 2006 #12;Kaliningrad District Heating Network Project 2004 - 2006 2 Table of content The report........................................................................................................... 7 1.4.1 District heating in the Region

  2. Retrofitting the Tennessee Valley Authority

    E-Print Network [OSTI]

    Zeiber, Kristen (Kristen Ann)

    2013-01-01

    As the flagship of the New Deal, the Tennessee Valley Authority (TVA) was a triumph of regional and environmental design that has since fallen on hard times. When writer James Agee toured the region in 1935, he described ...

  3. Qualifications of Candle Filters for Combined Cycle Combustion Applications

    SciTech Connect (OSTI)

    Tomasz Wiltowski

    2008-08-31

    The direct firing of coal produces particulate matter that has to be removed for environmental and process reasons. In order to increase the current advanced coal combustion processes, under the U.S. Department of Energy's auspices, Siemens Westinghouse Power Corporation (SWPC) has developed ceramic candle filters that can operate at high temperatures. The Coal Research Center of Southern Illinois University (SIUC), in collaboration with SWPC, developed a program for long-term filter testing at the SIUC Steam Plant followed by experiments using a single-filter reactor unit. The objectives of this program funded by the U.S. Department of Energy were to identify and demonstrate the stability of porous candle filter elements for use in high temperature atmospheric fluidized-bed combustion (AFBC) process applications. These verifications were accomplished through extended time slipstream testing of a candle filter array under AFBC conditions using SIUC's existing AFBC boiler. Temperature, mass flow rate, and differential pressure across the filter array were monitored for a duration of 45 days. After test exposure at SIUC, the filter elements were characterized using Scanning Electron Microscopy and BET surface area analyses. In addition, a single-filter reactor was built and utilized to study long term filter operation, the permeability exhibited by a filter element before and after the slipstream test, and the thermal shock resilience of a used filter by observing differential pressure changes upon rapid heating and cooling of the filter. The data acquired during the slipstream test and the post-test evaluations demonstrated the suitability of filter elements in advanced power generation applications.

  4. Entering the Era of Mega-genomics ( JGI Seventh Annual User Meeting 2012: Genomics of Energy and Environment)

    SciTech Connect (OSTI)

    Schatz, Michael C [Cold Spring Harbor Laboratory] [Cold Spring Harbor Laboratory

    2012-03-21

    Michael Schatz from Cold Spring Harbor Laboratory on "Entering the Era of Mega-genomics" at the 7th Annual Genomics of Energy & Environment Meeting on March 21, 2012 in Walnut Creek, Calif.

  5. The role of neutrophil recruitment in the pathogenesis of salmonella enterica serotype typhimurium-induced enteritis in calves 

    E-Print Network [OSTI]

    Nunes, Jairo Santos

    2009-05-15

    The role of neutrophils in the pathogenesis of Salmonella typhimurium-induced ruminant and human enteritis and diarrhea remains incompletely understood. To address this question, the in vivo bovine ligated ileal loop model ...

  6. Validation of Hot Water and Lactic Acid Sprays for the Reduction of Enteric Pathogens on the Surface of Beef Carcasses 

    E-Print Network [OSTI]

    Wright, Kyle D.

    2011-02-22

    in eliminating or reducing enteric pathogens. The facilities selected utilized either a lactic acid spray treatment or a combination of hot water followed by a lactic acid treatment. At both facilities, mesophilic plate counts (MPC) were significantly (P < 0...

  7. Entering the Era of Mega-genomics ( JGI Seventh Annual User Meeting 2012: Genomics of Energy and Environment)

    ScienceCinema (OSTI)

    Schatz, Michael C [Cold Spring Harbor Laboratory

    2013-01-15

    Michael Schatz from Cold Spring Harbor Laboratory on "Entering the Era of Mega-genomics" at the 7th Annual Genomics of Energy & Environment Meeting on March 21, 2012 in Walnut Creek, Calif.

  8. Enter search Sub Research News and Events About the Foundation How to Help About Parkinson's Community Information About Michael

    E-Print Network [OSTI]

    Feng, Jian

    Enter search Sub Research News and Events About the Foundation How to Help About Parkinson, including rotenone, cause Parkinson's-like symptoms in animals. In addition, long-term epidemiological

  9. Patterns of antimicrobial resistance among enteric bacteria found in multi-site group-level cohorts of humans and swine 

    E-Print Network [OSTI]

    Campbell, Linda Diane

    2006-04-12

    -1 PATTERNS OF ANTIMICROBIAL RESISTANCE AMONG ENTERIC BACTERIA FOUND IN MULTI-SITE GROUP-LEVEL COHORTS OF HUMANS AND SWINE A Thesis by LINDA DIANE CAMPBELL Submitted to the Office of Graduate Studies of Texas A&M University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE December 2004 Major Subject: Epidemiology PATTERNS OF ANTIMICROBIAL RESISTANCE AMONG ENTERIC BACTERIA FOUND IN MULTI-SITE GROUP-LEVEL COHORTS OF HUMANS AND SWINE A Thesis...

  10. Low pass filter for plasma discharge

    DOE Patents [OSTI]

    Miller, Paul A. (Albuquerque, NM)

    1994-01-01

    An isolator is disposed between a plasma reactor and its electrical energy source in order to isolate the reactor from the electrical energy source. The isolator operates as a filter to attenuate the transmission of harmonics of a fundamental frequency of the electrical energy source generated by the reactor from interacting with the energy source. By preventing harmonic interaction with the energy source, plasma conditions can be readily reproduced independent of the electrical characteristics of the electrical energy source and/or its associated coupling network.

  11. Dynamic data filtering system and method

    DOE Patents [OSTI]

    Bickford, Randall L; Palnitkar, Rahul M

    2014-04-29

    A computer-implemented dynamic data filtering system and method for selectively choosing operating data of a monitored asset that modifies or expands a learned scope of an empirical model of normal operation of the monitored asset while simultaneously rejecting operating data of the monitored asset that is indicative of excessive degradation or impending failure of the monitored asset, and utilizing the selectively chosen data for adaptively recalibrating the empirical model to more accurately monitor asset aging changes or operating condition changes of the monitored asset.

  12. Widget:RRSectionFilter | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThinWarsaw,What IsLogoCloud JumpRRSectionFilter Jump to: navigation,

  13. Nuclear Filter Technology | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to:Information 3rd|Northfork Electric Coop,NovopolymersNualgiFilter

  14. Interference Mitigation in Femtocell Network Using Anonymous Author(s)

    E-Print Network [OSTI]

    Freitas, Nando de

    the power adaptation process of the FUEs and MUE to be a discrete multi agent Markov decision problem 050 051 052 053 Interference Mitigation in Femtocell Network Using Q-learning Anonymous Author problems is the so-called co-tier and cross-tier interference caused by the new femtocell network layer

  15. Optical ranked-order filtering using threshold decomposition

    DOE Patents [OSTI]

    Allebach, Jan P. (West Lafayette, IN); Ochoa, Ellen (Pleasanton, CA); Sweeney, Donald W. (Alamo, CA)

    1990-01-01

    A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed.

  16. Optical ranked-order filtering using threshold decomposition

    DOE Patents [OSTI]

    Allebach, J.P.; Ochoa, E.; Sweeney, D.W.

    1987-10-09

    A hybrid optical/electronic system performs median filtering and related ranked-order operations using threshold decomposition to encode the image. Threshold decomposition transforms the nonlinear neighborhood ranking operation into a linear space-invariant filtering step followed by a point-to-point threshold comparison step. Spatial multiplexing allows parallel processing of all the threshold components as well as recombination by a second linear, space-invariant filtering step. An incoherent optical correlation system performs the linear filtering, using a magneto-optic spatial light modulator as the input device and a computer-generated hologram in the filter plane. Thresholding is done electronically. By adjusting the value of the threshold, the same architecture is used to perform median, minimum, and maximum filtering of images. A totally optical system is also disclosed. 3 figs.

  17. Method of producing monolithic ceramic cross-flow filter

    DOE Patents [OSTI]

    Larsen, D.A.; Bacchi, D.P.; Connors, T.F.; Collins, E.L. III

    1998-02-10

    Ceramic filter of various configuration have been used to filter particulates from hot gases exhausted from coal-fired systems. Prior ceramic cross-flow filters have been favored over other types, but those previously have been assemblies of parts somehow fastened together and consequently subject often to distortion or delamination on exposure hot gas in normal use. The present new monolithic, seamless, cross-flow ceramic filters, being of one-piece construction, are not prone to such failure. Further, these new products are made by a novel casting process which involves the key steps of demolding the ceramic filter green body so that none of the fragile inner walls of the filter is cracked or broken. 2 figs.

  18. Method of producing monolithic ceramic cross-flow filter

    DOE Patents [OSTI]

    Larsen, David A. (Clifton Park, NY); Bacchi, David P. (Schenectady, NY); Connors, Timothy F. (Watervliet, NY); Collins, III, Edwin L. (Albany, NY)

    1998-01-01

    Ceramic filter of various configuration have been used to filter particulates from hot gases exhausted from coal-fired systems. Prior ceramic cross-flow filters have been favored over other types, but those previously horn have been assemblies of parts somehow fastened together and consequently subject often to distortion or delamination on exposure hot gas in normal use. The present new monolithic, seamless, cross-flow ceramic filters, being of one-piece construction, are not prone to such failure. Further, these new products are made by novel casting process which involves the key steps of demolding the ceramic filter green body so that none of the fragile inner walls of the filter is cracked or broken.

  19. Knowing a good HOG filter when you see it: Efficient selection of filters for detection

    E-Print Network [OSTI]

    Shakhnarovich, Greg

    . In that sense, it is a category- independent method for part selection. Of course, some information about Technological Institute at Chicago greg@ttic.edu 3 University of Massachusetts, Amherst smaji. The intuition is that good filters across categories exhibit common traits such as, low clutter and gradients

  20. Method of recovering hazardous waste from phenolic resin filters

    DOE Patents [OSTI]

    Meikrantz, David H. (Idaho Falls, ID); Bourne, Gary L. (Idaho Falls, ID); McFee, John N. (Albuquerque, NM); Burdge, Bradley G. (Idaho Falls, ID); McConnell, Jr., John W. (Idaho Falls, ID)

    1991-01-01

    The invention is a process for the recovery of hazardous wastes such as heavy metals and radioactive elements from phenolic resin filter by a circulating a solution of 8 to 16 molar nitric acid at a temperature of 110 to 190 degrees F. through the filter. The hot solution dissolves the filter material and releases the hazardous material so that it can be recovered or treated for long term storage in an environmentally safe manner.

  1. Effect of local filtering on Freezing Phenomena of Quantum Correlation

    E-Print Network [OSTI]

    Sumana Karmakar; Ajoy Sen; Amit Bhar; Debasis Sarkar

    2015-04-20

    General quantum correlations measures like quantum discord, one norm geometric quantum discord, exhibit freezing, sudden change, double sudden change behavior in their decay rates under different noisy channels. Therefore, one may attempt to investigate how the freezing behavior and other dynamical features are affected under application of local quantum operations. In this work, we demonstrate the effect of local filtering on the dynamical evolution of quantum correlations. We have found that using local filtering one may remove freezing depending upon the filtering parameter.

  2. Modeling Flow Past a Tilted Vena Cava Filter

    SciTech Connect (OSTI)

    Singer, M A; Wang, S L

    2009-06-29

    Inferior vena cava filters are medical devices used to prevent pulmonary embolism (PE) from deep vein thrombosis. In particular, retrievable filters are well-suited for patients who are unresponsive to anticoagulation therapy and whose risk of PE decreased with time. The goal of this work is to use computational fluid dynamics to evaluate the flow past an unoccluded and partially occluded Celect inferior vena cava filter. In particular, the hemodynamic response to thrombus volume and filter tilt is examined, and the results are compared with flow conditions that are known to be thrombogenic. A computer model of the filter inside a model vena cava is constructed using high resolution digital photographs and methods of computer aided design. The models are parameterized using the Overture software framework, and a collection of overlapping grids is constructed to discretize the flow domain. The incompressible Navier-Stokes equations are solved, and the characteristics of the flow (i.e., velocity contours and wall shear stresses) are computed. The volume of stagnant and recirculating flow increases with thrombus volume. In addition, as the filter increases tilt, the cava wall adjacent to the tilted filter is subjected to low velocity flow that gives rise to regions of low wall shear stress. The results demonstrate the ease of IVC filter modeling with the Overture software framework. Flow conditions caused by the tilted Celect filter may elevate the risk of intrafilter thrombosis and facilitate vascular remodeling. This latter condition also increases the risk of penetration and potential incorporation of the hook of the filter into the vena caval wall, thereby complicating filter retrieval. Consequently, severe tilt at the time of filter deployment may warrant early clinical intervention.

  3. Kalman Filter Tracking on Parallel Architectures

    E-Print Network [OSTI]

    Giuseppe Cerati; Peter Elmer; Steven Lantz; Kevin McDermott; Dan Riley; Matevž Tadel; Peter Wittich; Frank Würthwein; Avi Yagil

    2015-05-18

    Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Example technologies today include Intel's Xeon Phi and GPGPUs. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High Luminosity LHC, for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques including Cellular Automata or returning to Hough Transform. The most common track finding techniques in use today are however those based on the Kalman Filter. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. They are known to provide high physics performance, are robust and are exactly those being used today for the design of the tracking system for HL-LHC. Our previous investigations showed that, using optimized data structures, track fitting with Kalman Filter can achieve large speedup both with Intel Xeon and Xeon Phi. We report here our further progress towards an end-to-end track reconstruction algorithm fully exploiting vectorization and parallelization techniques in a realistic simulation setup.

  4. Eye Gaze Tracking using Correlation Filters

    SciTech Connect (OSTI)

    Karakaya, Mahmut; Boehnen, Chris Bensing; Bolme, David S; Mahallesi, Mevlana; Kayseri, Talas

    2014-01-01

    In this paper, we studied a method for eye gaze tracking that provide gaze estimation from a standard webcam with a zoom lens and reduce the setup and calibration requirements for new users. Specifically, we have developed a gaze estimation method based on the relative locations of points on the top of the eyelid and eye corners. Gaze estimation method in this paper is based on the distances between top point of the eyelid and eye corner detected by the correlation filters. Advanced correlation filters were found to provide facial landmark detections that are accurate enough to determine the subjects gaze direction up to angle of approximately 4-5 degrees although calibration errors often produce a larger overall shift in the estimates. This is approximately a circle of diameter 2 inches for a screen that is arm s length from the subject. At this accuracy it is possible to figure out what regions of text or images the subject is looking but it falls short of being able to determine which word the subject has looked at.

  5. Noise Reduced Realized Volatility: A Kalman Filter Approach

    E-Print Network [OSTI]

    Owens, John; Steigerwald, Douglas G

    2009-01-01

    F. , 2004. Microstructure Noise, Realized Volatility, andof Market Microstructure Noise. Working Paper w9611, NBER.Noise Reduced Realized Volatility: A Kalman Filter Approach

  6. Compact cyclone filter train for radiological and hazardous environments

    DOE Patents [OSTI]

    Bench, Thomas R. (Pittsburgh, PA)

    1998-01-01

    A compact cyclone filter train for the removal of hazardous and radiologi particles from a gaseous fluid medium which permits a small cyclone separator to be used in a very small space envelope due to the arrangement of the filter housing adjacent to the separator with the cyclone separator and the filters mounted on a plate. The entire unit will have a hoist connection at the center of gravity so that the entire unit including the separator, the filters, and the base can be lifted and repositioned as desired.

  7. Diesel Soot Filter Characterization and Modeling for Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with DOW Automotive) Diesel Soot Filter Characterization and Modeling for Advanced Substrates (CRADA with DOW Automotive) Presentation from the U.S. DOE Office of Vehicle...

  8. Diesel Soot Filter Characterization and Modeling for Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and DOW Automotive) Diesel Soot Filter Characterization and Modeling for Advanced Substrates (CRADA and DOW Automotive) Presentation from the U.S. DOE Office of Vehicle...

  9. Automatic Resonance Alignment of High-Order Microring Filters

    E-Print Network [OSTI]

    Mak, Jason C C; Xue, Tianyuan; Mikkelsen, Jared C; Yong, Zheng; Poon, Joyce K S

    2015-01-01

    Automatic resonance alignment tuning is performed in high-order series coupled microring filters using a feedback system. By inputting only a reference wavelength, a filter is tuned such that passband ripples are dramatically reduced compared to the initial detuned state and the passband becomes centered at the reference. The method is tested on 5th order microring filters fabricated in a standard silicon photonics foundry process. Repeatable tuning is demonstrated for filters on multiple dies from the wafer and for arbitrary reference wavelengths within the free spectral range of the microrings.

  10. Improvement and Simplification of Diesel Particulate Filter System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improvement and Simplification of Diesel Particulate Filter System using a Ceria-Based Fuel-Borne Catalyst in Serial Applications Improvement and Simplification of Diesel...

  11. Agents That Talk Back (Sometimes): Filter Programs for Affective Communication

    E-Print Network [OSTI]

    Bari, Università degli Studi di

    Agents That Talk Back (Sometimes): Filter Programs for Affective Communication Helmut Prendinger- action that supports basic features of affective conver- sation. As essential requirements for animated

  12. Effect of Biodiesel Blends on Diesel Particulate Filter Performance

    SciTech Connect (OSTI)

    Williams, A.; McCormick, R. L.; Hayes, R. R.; Ireland, J.; Fang, H. L.

    2006-11-01

    Presents results of tests of ultra-low sulfur diesel blended with soy-biodiesel at 5 percent using a Cummins ISB engine with a diesel particulate filter.

  13. Ash reduction system using electrically heated particulate matter filter

    SciTech Connect (OSTI)

    Gonze, Eugene V; Paratore, Jr., Michael J; He, Yongsheng

    2011-08-16

    A control system for reducing ash comprises a temperature estimator module that estimates a temperature of an electrically heated particulate matter (PM) filter. A temperature and position estimator module estimates a position and temperature of an oxidation wave within the electrically heated PM filter. An ash reduction control module adjusts at least one of exhaust flow, fuel and oxygen levels in the electrically heated PM filter to adjust a position of the oxidation wave within the electrically heated PM filter based on the oxidation wave temperature and position.

  14. Real Time Estimation of Ship Motions Using Kalman Filtering Techniques

    E-Print Network [OSTI]

    Triantafyllou, Michael S.

    1983-01-01

    The estimation of the heave, pitch, roll, sway, and yaw motions of a DD-963 destroyer is studied, using Kalman filtering

  15. Future Trends for DPF?SCR On-Filter (SCRF)

    Broader source: Energy.gov [DOE]

    Fundamental and application-relevant test data gathered on SCRF filters , along with coating distribution, NOx conversion, pressure drop data, and engine tests, will be discussed.

  16. Non-Destructive Neutron Imaging to Analyze Particulate Filters

    Broader source: Energy.gov [DOE]

    Non-destructive, non-invasive imaging is being employed in the laboratory to understand how soot, ash, and catalytic washcoat are deposited within a diesel particulate filter.

  17. Predicting Thermal Stress in Diesel Particulate Filters | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Diesel Emission Control Review Substrate Studies of an Electrically-Assisted Diesel Particulate Filter Neutron Imaging of Advanced Engine Technologies...

  18. Biodiesel Effects on Diesel Particle Filter Performance: Milestone Report

    SciTech Connect (OSTI)

    Williams, A.; McCormick, R. L.; Hayes, R.; Ireland, J.

    2006-03-01

    Research results on the performance of biodiesel and biodiesel blends with ultra-low sulfur diesel (ULSD) and a diesel particle filter (DPF).

  19. Non-Destructive Neutron Imaging to Analyze Particulate Filters...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    non-invasive imaging is being employed in the laboratory to understand how soot, ash, and catalytic washcoat are deposited within a diesel particulate filter....

  20. An adaptive sparse-grid-based iterative ensemble Kalman filter...

    Office of Scientific and Technical Information (OSTI)

    An adaptive sparse-grid-based iterative ensemble Kalman filter approach for parameter field estimation Citation Details In-Document Search Title: An adaptive sparse-grid-based...

  1. Ultra-Lite Diesel Particulate Filter Cartridge for Reduced Regeneratio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reduced Regeneration Time and Fuel Consumption Self-cleaning ceramic filter cartridges offer the advantage of better fuel economy, faster regeneration time, improved heat...

  2. Expanded Capacity Microwave-Cleaned Diesel Particulate Filter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Particulate Filter 2002 DEER Conference Presentation: Industrial Ceramic Solutions, LLC 2002deernixdorf.pdf More Documents & Publications Ultra-Lite Diesel...

  3. Perforation of Inferior Vena Cava by Inferior Vena Cava Filter

    E-Print Network [OSTI]

    Unterman, Sarah; Nair, Tad

    2013-01-01

    vena cava filter strut perforation discovered during rightin E mergency M edicine Perforation of Inferior Vena Cava bysuggestive of chronic perforation with no evidence of free

  4. n errla lona Guest Author -

    E-Print Network [OSTI]

    F R p · Fiber Remforced Plastics n errla lona·········· Guest Author - Dr. Aftab Mufti. P-Stengthening Using Prestressed Carbon Fiber Sheets In recent years, researthers at EMfA Duhendorl, Switzerland, have been working extensively on ~.I ,trengtllening reinforced concrete member.; u,mg lillht· weight carbon

  5. Designated Responsible Authority (DRA) Training

    E-Print Network [OSTI]

    Minnesota, University of

    · The role of Designated Responsible Authority (DRA) is defined in the Using Vehicles for University Business policy. · The head of each University department with permanently assigned vehicles must appoint. Be familiar with the policies and related documents governing the use of University vehicles, and direct

  6. JOURNAL AUTHORS SURVEY Prepared by

    E-Print Network [OSTI]

    Stevenson, Paul

    JISC/OSI JOURNAL AUTHORS SURVEY Report Prepared by Key Perspectives Ltd 48 Old Coach Road, Playing behind its development 4 2.2 Models and definitions of open access 8 2.2.1 Open access journals 8 2 4.1 Respondent profiles 18 4.2 Awareness of open access journals 18 4.2.1 Extent and longevity

  7. Danish Energy Authority Project Document

    E-Print Network [OSTI]

    for larger existing buildings subject to major renovation 4. Energy performance certification (energyDanish Energy Authority Project Document Implementation of the EU directive on the energy performance of buildings: Development of the Latvian Scheme for energy auditing of buildings and inspection

  8. Danish Energy Authority Final Report

    E-Print Network [OSTI]

    on the energy performance for larger existing buildings subject to major renovation 4. Energy performanceDanish Energy Authority Final Report Implementation of the EU directive on the energy performance of buildings: Development of the Latvian Scheme for energy auditing of buildings and inspection of boilers

  9. With Compliments of the Author

    E-Print Network [OSTI]

    Zhang, Meirong

    Operators and Matrices With Compliments of the Author OaM-08-50 889­899 Zagreb, Croatia Volume 8, Croatia. All correspondence and subscription orders should be addressed to the Editorial Office: www, Croatia Fax: +385 1 6008799 The content of this publication is indexed in Mathematical Reviews (Math

  10. Narrowband filter radiometer for ground-based measurements of global ultraviolet solar irradiance and total ozone

    SciTech Connect (OSTI)

    Petkov, Boyan; Vitale, Vito; Tomasi, Claudio; Bonafe, Ubaldo; Scaglione, Salvatore; Flori, Daniele; Santaguida, Riccardo; Gausa, Michael; Hansen, Georg; Colombo, Tiziano

    2006-06-20

    The ultraviolet narrowband filter radiometer (UV-RAD) designed by the authors to take ground-based measurements of UV solar irradiance, total ozone, and biological dose rate is described, together with the main characteristics of the seven blocked filters mounted on it, all of which have full widths at half maxima that range 0.67 to 0.98 nm. We have analyzed the causes of cosine response and calibration errors carefully to define the corresponding correction terms, paying particular attention to those that are due to the spectral displacements of the filter transmittance peaks from the integer wavelength values. The influence of the ozone profile on the retrieved ozone at large solar zenith angles has also been examined by means of field measurements. The opportunity of carrying out nearly monochromatic irradiance measurements offered by the UV-RAD allowed us to improve the procedure usually followed to reconstruct the solar spectrum at the surface by fitting the computed results, using radiative transfer models with field measurements of irradiance. Two long-term comparison campaigns took place, showing that a mean discrepancy of+0.3% exists between the UV-RAD total ozone values and those given by the Brewer no. 63 spectroradiometer and that mean differences of+0.3% and-0.9% exist between the erythemal dose rates determined with the UV-RAD and those obtained with the Brewer no. 63 and the Brewer no. 104 spectroradiometers, respectively.

  11. EFFECT OF FILTER TEMPERATURE ON TRAPPING ZINC VAPOR

    SciTech Connect (OSTI)

    Korinko, P.

    2011-03-25

    To address the {sup 65}Zn contamination issue in the TEF, a multi-task experimental program was initiated. The first experimental task was completed and is reported in Ref. 1. The results of the second experimental task are reported here. This task examined the effect of filter temperature on trapping efficiency and deposit morphology. Based on the first experimental tasks that examined filter pore size and trapping efficiency, stainless steel filter media with a 20 {micro}m pore size was selected. A series of experiments using these filters was conducted during this second task to determine the effect of filter temperature on zinc vapor trapping efficiency, adhesion and morphology. The tests were conducted with the filters heated to 60, 120, and 200 C; the zinc source material was heated to 400 C for all the experiments to provide a consistent zinc source. The samples were evaluated for mass change, deposit adhesion and morphology. As expected from the physical vapor deposition literature, a difference in deposit morphology and appearance was observed between the three filter temperatures. The filter held at 60 C had the largest average mass gain while the 120 and 200 C filters exhibited similar but lower weight gains. The standard deviations were large and suggest that all three temperatures exhibited comparable gains. No zinc was detected on the backside surface of the filters indicating high efficiency for front and internal trapping. A zinc rich deposit was formed on the surface of the 60 C filter. Based on a simple tape adhesion test, the surface zinc was readily removed from the 60 C filter while less zinc deposit was removed from the 120 and 200 C filter samples. It is surmised that the higher temperatures enable the zinc to deposit within the filter media rather than on the surface. Based on the findings that all three statistically trapped the same quantity of zinc vapor and that the higher temperatures resulted in a more adherent/better trapped product, operating the filters at 120 to 200 C is recommended.

  12. Kalman Filter Tracking on Parallel Architectures

    E-Print Network [OSTI]

    Cerati, Giuseppe; Lantz, Steven; McDermott, Kevin; Riley, Dan; Tadel, Matevž; Wittich, Peter; Würthwein, Frank; Yagil, Avi

    2015-01-01

    Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Example technologies today include Intel's Xeon Phi and GPGPUs. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High Luminosity LHC, for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques including Cellular Automata or returning to Hough Transform. The most common track finding techniques in use today are however those based on the Kalman Filter. Significant experience has...

  13. Electromagnetic interference filter for automotive electrical systems

    DOE Patents [OSTI]

    Herron, Nicholas Hayden; Carlson, Douglas S; Tang, David; Korich, Mark D

    2013-07-02

    A filter for an automotive electrical system includes a substrate having first and second conductive members. First and second input terminals are mounted to the substrate. The first input terminal is electrically connected to the first conductive member, and the second input terminal is electrically connected to the second conductive member. A plurality of capacitors are mounted to the substrate. Each of the capacitors is electrically connected to at least one of the first and second conductive members. First and second power connectors are mounted to the substrate. The first power connector is electrically connected to the first conductive member, and the second power connector is electrically connected to the second conductive member. A common mode choke is coupled to the substrate and arranged such that the common mode choke extends around at least a portion of the substrate and the first and second conductive members.

  14. 3D Wavelet-Based Filter and Method

    DOE Patents [OSTI]

    Moss, William C. (San Mateo, CA); Haase, Sebastian (San Francisco, CA); Sedat, John W. (San Francisco, CA)

    2008-08-12

    A 3D wavelet-based filter for visualizing and locating structural features of a user-specified linear size in 2D or 3D image data. The only input parameter is a characteristic linear size of the feature of interest, and the filter output contains only those regions that are correlated with the characteristic size, thus denoising the image.

  15. OPTIMIZATION OF AUTOMOTIVE VALVE TRAIN COMPONENTS WITH IMPLICT FILTERING \\Lambda

    E-Print Network [OSTI]

    Filtering, Mechanical Systems, Automotive Valve Trains AMS subject classifications. 65K05, 65K10, 65L05, 65YOPTIMIZATION OF AUTOMOTIVE VALVE TRAIN COMPONENTS WITH IMPLICT FILTERING \\Lambda T. D. CHOI y , O identification and optimization in automotive valve train design. We extend our previous work by using a more

  16. Toward Controlled Wind Farm Output: Adjustable Power Filtering

    E-Print Network [OSTI]

    Maggiore, Manfredi

    1 Toward Controlled Wind Farm Output: Adjustable Power Filtering Barry G. Rawn, Student Member research into the limits on controllable power output from wind energy conversion systems. The viewpoint methodology that specifies the delivered power as a filtered version of available wind power. Simulation

  17. Hardware Implementation of the LMS Adaptive Filter for a

    E-Print Network [OSTI]

    Slatton, Clint

    Hardware Implementation of the LMS Adaptive Filter for a Brain-Machine Interface March 13, 2002@cnel.ufl.edu Advisors: Dr. José C. Principe Dr. Karl Gugel #12;Outline · Introduction · BMI Project Overview · LMS Adaptive Filter · TI C33 DSP · C33 PCI Development Board · Mathematics in DSP · LMS in DSP · Results

  18. Collaborative Blog Spam Filtering Using Adaptive Percolation Search

    E-Print Network [OSTI]

    Ahn, Yong-Yeol

    Collaborative Blog Spam Filtering Using Adaptive Percolation Search Seungyeop Han Division collaborative filtering method for link spams on blogs. The key idea is to rely on manual identi- fication in instant messages, newsgroups, chat rooms, voice calls, and blogs. A blog is a web-based publication

  19. Study on optical finite impulse response filter Guangjie Zeng

    E-Print Network [OSTI]

    Study on optical finite impulse response filter Ying Zhou Guangjie Zeng Feihong Yu Zhejiang University State Key Laboratory of Modern Optical Instrumentation Optical Engineering Department Hangzhou Kong Abstract. We present an optical finite impulse response (FIR) filter de- sign method. Based

  20. Model-Based Commissioning for Filters in Room Air Conditioners 

    E-Print Network [OSTI]

    Wang, F.; Yoshida, H.; Kitagawa, H.; Matsumoto, K.; Goto, K.

    2004-01-01

    This paper proposes a model that can estimate filter resistance. Two sorts of value are used as inputs to estimate filter resistance. One is the power consumed by the fan in the indoor unit and the other is the thermal performance. For the room air...

  1. Robustness of optimal binary filters: analysis and design 

    E-Print Network [OSTI]

    Grigoryan, Artyom M

    1999-01-01

    and these are governed by parameterized probability laws. The optimal filter is found relative to these laws. Qualitatively, a filter is said to be robust when its performance degradation is acceptable for processes statistically close to the one for which it has been...

  2. Impact of RNS Coding Overhead on FIR Filters Performance

    E-Print Network [OSTI]

    Nannarelli, Alberto

    Impact of RNS Coding Overhead on FIR Filters Performance Gian Carlo Cardarilli, Andrea Del Re in Residue Number System (RNS) is pre- sented. The exploration regards different aspects of the RNS FIR filter design such as the dynamic range, the overhead due to the coding of the RNS base with respect

  3. RNS Implementation of High Performance Filters for Satellite Demultiplexing

    E-Print Network [OSTI]

    Nannarelli, Alberto

    RNS Implementation of High Performance Filters for Satellite Demultiplexing G.C. Cardarilli, A. Del we present a Residue Number System (RNS) implementation of digital filters to be used for space applications. The RNS is particularly attractive because of the reduced power dissipation with respect

  4. Low Power and Low Leakage Implementation of RNS FIR Filters

    E-Print Network [OSTI]

    Nannarelli, Alberto

    Low Power and Low Leakage Implementation of RNS FIR Filters Gian Carlo Cardarilli, Andrea Del Re be neglected any longer. In this work, we take advantage of the properties of the Residue Number System (RNS) to implement FIR filters with reduced static and dynamic power consumption. The results show that the RNS

  5. A COMPARISON OF NOISESHAPING CLOCK GENERATORS FOR SWITCHEDCAPACITOR FILTERS *

    E-Print Network [OSTI]

    Hurst, Paul J.

    (z) of the SCF attenuates the high­frequency sampling noise and gives a high SSNR at the filter output. SCF yA COMPARISON OF NOISE­SHAPING CLOCK GENERATORS FOR SWITCHED­CAPACITOR FILTERS * Raymond W. Zeng Engineering University of California, Davis, CA 95616 ABSTRACT A programmable clock generator for switched

  6. Pedestrian Path Prediction with Recursive Bayesian Filters: A Comparative Study

    E-Print Network [OSTI]

    Gavrila, Dariu M.

    Pedestrian Path Prediction with Recursive Bayesian Filters: A Comparative Study N. Schneider1 a com- parative study on recursive Bayesian filters for pedestrian path pre- diction at short time/acceleration/turn). These are applied to four typical pedestrian mo- tion types (crossing, stopping, bending in, starting). Position

  7. Kalman Filtering with Uncertain Noise Covariances Srikiran Kosanam Dan Simon

    E-Print Network [OSTI]

    Simon, Dan

    the health parameters of an aircraft gas turbine engine. Keywords: Kalman filtering, robust filtering to discrete time systems and applied to aircraft gas turbine engine health estimation. Consider a linear of Electrical Engineering Department of Electrical Engineering Cleveland State University Cleveland State

  8. Technology development: HEPA filter service life test plan

    SciTech Connect (OSTI)

    Kirchner, K.N.; Cummings, K.G.; Leck, W.C.; Fretthold, J.K.

    1995-05-31

    Rocky Flats Environmental Technology Site (the Site) has approximately 10,000 High Efficiency Particulate Air (HEPA) Filters installed in a variety of filter plenums. These ventilation/filtration plenum systems are used to control the release of airborne particulate contaminates to the environment during normal operations and also during potential design-based accidents. The operational integrity of the HEPA filter plenums is essential to maintaining the margins of safety as required by building specific Final Safety Analysis Reports (FSARS) for protection of the public and environment. An Unreviewed Safety Question Determination (USQD), USDQ-RFP94.0615-ARS, was conducted in 1994 addressing the potential inadequacy of the safety envelope for Protected Area building HEPA plenums. While conducting this USQD, questions were raised concerning the maximum service life criteria for HEPA filters. Accident scenarios in existing FSARs identify conditions that could potentially cause plugging or damage of down stream HEPA filters as a result of impaction from failed filters. Additionally, available data indicates that HEPA filters experience structural degradation due to the effects of age. The Unresolved Safety Question (USQ) compensatory measures thus require testing and analysis of used HEPA filters in order to determine and implement service life criteria.

  9. Method of concurrently filtering particles and collecting gases

    DOE Patents [OSTI]

    Mitchell, Mark A; Meike, Annemarie; Anderson, Brian L

    2015-04-28

    A system for concurrently filtering particles and collecting gases. Materials are be added (e.g., via coating the ceramic substrate, use of loose powder(s), or other means) to a HEPA filter (ceramic, metal, or otherwise) to collect gases (e.g., radioactive gases such as iodine). The gases could be radioactive, hazardous, or valuable gases.

  10. Biomass Control in Waste Air Biotrickling Filters by Protozoan Predation

    E-Print Network [OSTI]

    Biomass Control in Waste Air Biotrickling Filters by Protozoan Predation Huub H. J. Cox, Marc A as a means of biomass control. Wet biomass for- mation in 23.6-L reactors over a 77-day period was reduced in the biotrickling filter enriched with protozoa. The lower rate of biomass accumulation after the addi- tion

  11. Central Characterization Program (CCP) Transuranic Authorized...

    Office of Environmental Management (EM)

    Authorized Methods for Payload Control Central Characterization Program (CCP) Transuranic Authorized Methods for Payload Control This document was used to determine facts and...

  12. Energy Department Authorizes Corpus Christi Liquefaction Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Authorizes Corpus Christi Liquefaction Project to Export Liquefied Natural Gas Energy Department Authorizes Corpus Christi Liquefaction Project to Export Liquefied Natural Gas May...

  13. Peoria Tribe: Housing Authority- 2010 Project

    Broader source: Energy.gov [DOE]

    The Housing Authority of the Peoria Tribe of Indians of Oklahoma (Peoria Housing Authority or PHA) will conduct the "PHA Weatherization Training Project."

  14. Obama Administration Announces Billions in Lending Authority...

    Energy Savers [EERE]

    Billions in Lending Authority for Renewable Energy Projects and to Modernize the Grid Obama Administration Announces Billions in Lending Authority for Renewable Energy Projects and...

  15. Enhanced Particle Capture in Slow Sand Filters using a Filter Aid O b j e c t i v e s

    E-Print Network [OSTI]

    was obtained by extracting an acid soluble polymer from surface water seston. The filter aid enhances particle removal from raw source waters by modifing the filter media surface properties and appearsEnhanced Particle Capture in Slow Sand Filters using a Filter Aid O b j e c t i v e s The main

  16. Filtering with Marked Point Process Observations via Poisson Chaos Expansion

    SciTech Connect (OSTI)

    Sun Wei; Zeng Yong; Zhang Shu

    2013-06-15

    We study a general filtering problem with marked point process observations. The motivation comes from modeling financial ultra-high frequency data. First, we rigorously derive the unnormalized filtering equation with marked point process observations under mild assumptions, especially relaxing the bounded condition of stochastic intensity. Then, we derive the Poisson chaos expansion for the unnormalized filter. Based on the chaos expansion, we establish the uniqueness of solutions of the unnormalized filtering equation. Moreover, we derive the Poisson chaos expansion for the unnormalized filter density under additional conditions. To explore the computational advantage, we further construct a new consistent recursive numerical scheme based on the truncation of the chaos density expansion for a simple case. The new algorithm divides the computations into those containing solely system coefficients and those including the observations, and assign the former off-line.

  17. Polarization-independent optical wavelength filter for channel dropping applications

    DOE Patents [OSTI]

    Deri, R.J.; Patterson, F.

    1996-05-07

    The polarization dependence of optical wavelength filters is eliminated by using waveguide directional couplers. Material birefringence is used to compensate for the waveguide (electromagnetic) birefringence which is the original cause of the polarization dependence. Material birefringence is introduced in a controllable fashion by replacing bulk waveguide layers by finely layered composites, such as multiple quantum wells using III-V semiconductor materials. The filter has use in wavelength-division multiplexed fiber optic communication systems. This filter has broad application for wavelength-tunable receivers in fiber optic communication links, which may be used for telecommunications, optical computer interconnect links, or fiber optic sensor systems. Since multiple-wavelength systems are increasingly being used for all of these applications, the filter is useable whenever a rapidly tunable, wavelength-filtering receiver is required. 14 figs.

  18. High exhaust temperature, zoned, electrically-heated particulate matter filter

    SciTech Connect (OSTI)

    Gonze, Eugene V.; Paratore, Jr., Michael J.; Bhatia, Garima

    2015-09-22

    A system includes a particulate matter (PM) filter, an electric heater, and a control circuit. The electric heater includes multiple zones, which each correspond to longitudinal zones along a length of the PM filter. A first zone includes multiple discontinuous sub-zones. The control circuit determines whether regeneration is needed based on an estimated level of loading of the PM filter and an exhaust flow rate. In response to a determination that regeneration is needed, the control circuit: controls an operating parameter of an engine to increase an exhaust temperature to a first temperature during a first period; after the first period, activates the first zone; deactivates the first zone in response to a minimum filter face temperature being reached; subsequent to deactivating the first zone, activates a second zone; and deactivates the second zone in response to the minimum filter face temperature being reached.

  19. Calibration of the HAO standard opal filter set. Technical note

    SciTech Connect (OSTI)

    Streete, J.L.

    1989-10-01

    Solar radiation attenuators called opal filters have been used for several decades to calibrate photographic film in instruments used to measure the brightness of the solar corona. The primary component used in fabricating these filters is opal glass. New measurements of the transmittance of the HAO fundamental standard set of opal filters were begun in September, 1988. Since nearly two decades had passed from the time of the last calibration measurements, there was concern that the transmittance of the filters might have changed. Another motivation for recalibrating the opal filters was the desire to know the transmittance values in spectral regions above and below those used in 1970. The spectral regions chosen were 450 nm, 550 nm, 650 nm and 800 nm. Comparisons of transmittance are made with the previous values, and new transmittance values are given.

  20. Polarization-independent optical wavelength filter for channel dropping applications

    DOE Patents [OSTI]

    Deri, Robert J. (Pleasanton, CA); Patterson, Frank (Livermore, CA)

    1996-01-01

    The polarization dependence of optical wavelength filters is eliminated by using waveguide directional couplers. Material birefringence is used to compensate for the waveguide (electromagnetic) birefringence which is the original cause of the polarization dependence. Material birefringence is introduced in a controllable fashion by replacing bulk waveguide layers by finely layered composites, such as multiple quantum wells using III-V semiconductor materials. The filter has use in wavelength-division-multiplexed fiber optic communication systems. This filter has broad application for wavelength-tunable receivers in fiber optic communication links, which may be used for telecommunications, optical computer interconnect links, or fiber optic sensor systems. Since multiple-wavelength systems are increasingly being used for all of these applications, the filter is useable whenever a rapidly tunable, wavelength-filtering receiver is required.

  1. Arsenic Removal Using AgedArsenic Removal Using Aged Rapid Sand Filter MediaRapid Sand Filter Media

    E-Print Network [OSTI]

    Arsenic Removal Using AgedArsenic Removal Using Aged Rapid Sand Filter MediaRapid Sand Filter Media byby C. Menard, D. Burt, M.R. CollinsC. Menard, D. Burt, M.R. Collins Water Treatment Technology Assistance CenterWater Treatment Technology Assistance Center Department of Civil Engineering

  2. High frequency, fourth-order, micromechanical bandpass fil-ters, with tunable frequency and bandwidth, and filter Q's in the

    E-Print Network [OSTI]

    Nguyen, Clark T.-C.

    SUMMARY High frequency, fourth-order, micromechanical bandpass fil- ters, with tunable frequency mechanical resonator components with IC-compatible, micromechanical versions. To this end, a fourth-order, 8-resonator filter operation, this paper presents design equations for a variety of fourth-order bandpass filters

  3. Design and manufacture of a low-cost mechanism for compacting used oil filters

    E-Print Network [OSTI]

    Kosoglow, Richard D

    2008-01-01

    Used automotive oil filter disposal is a real and increasing problem in the United States. With over 450 million oil filters sold each year, and 80% of used filters thrown into landfills, this waste represents a significant ...

  4. Design of fuel efficient brick kiln for ceramic water filter firing in Ghana

    E-Print Network [OSTI]

    Adjorlolo, Eric (Eric James Kofi)

    2007-01-01

    Ceramic water filters are currently produced in Ghana in order to provide a household solution to contaminated water. These filters, locally branded with the name Kosim filter by originating from Potters for Peace-Nicaragua, ...

  5. New Techniques to Characterize and Remove Water-Based Drilling Fluids Filter Cake 

    E-Print Network [OSTI]

    Elkatatny, Salaheldin Mahmoud

    2013-03-29

    Filter cake characterization is very important in drilling and completion operations. Heterogeneity of the filter cake plays a key role in the design of chemical treatments needed to remove the filter cake. The objectives of this study...

  6. TESTING OF THE SECOND GENERATION SPINTEK ROTARY FILTER -11357

    SciTech Connect (OSTI)

    Herman, D.; Poirier, M.; Fowley, M.; Keefer, M.; Huff, T.

    2011-02-02

    The SpinTek rotary microfilter has been developed under the Department of Energy (DOE) Office of Environmental Management (EM) for the purpose of deployment in radioactive service in the DOE complex. The unit that was fabricated and tested is the second generation of the filter that incorporates recommended improvements from previous testing. The completion of this test satisfied a key milestone for the EM technology development program and technology readiness for deployment by Savannah River Remediation in the Small Column Ion Exchange and Sludge Washing processes at the Savannah River Site (SRS). The Savannah River National Laboratory (SRNL) contracted SpinTek Filtration to fabricate a full scale 25 disk rotary filter and perform a 1000 hour endurance test with a simulated SRS sludge. Over 1500 hours of operation have been completed with the filter. SpinTek Filtration fabricated a prototypic 25 disk rotary filter including updates to manufacturing tolerances, an updated design to the rotary joint, improved cooling to the bottom journal, decreases in disk and filter shaft hydraulic resistances. The filter disks were fabricated with 0.5 {micro} pore size, sintered-metal filter media manufactured by Pall Corporation (M050). After fabrication was complete, the filter passed acceptance tests demonstrating rejection of solids and clean water flux with a 50% improvement over the previous filters. Once the acceptance test was complete, a 1000 hour endurance test was initiated simulating a sludge washing process. The test used a simulated SRS Sludge Batch 6 recipe. The insoluble solids started at 5 wt% and were raised to 10 and 15 wt% insoluble solids to simulate the concentration of a large volume tank. The filter system was automated and set up for 24 hour unattended operation. To facilitate this, process control logic was written to operate the filter. During the development it was demonstrated that the method of starting and stopping the filter can affect the build up of filter cake on the disks and therefore the performance of the filter. The filter performed well with the simulant. Very little drop in production was noticed between the 5 and 10 wt% insoluble solids feed. Increasing to 15 wt% had a more pronounced impact due to the rheology of the feed. Acid cleaning was used to clean the filter disks in-situ and restore filtration rate to almost 90% of the initial clean disk rate. Eighty liters of 0.2 M nitric acid in conjunction with water rinses were used to clean the filter in less than 2 hours. Filter testing was completed after 1000 hours of operation were performed on the final filter assembly configuration. The total run time for the testing was over 1500 hours. At the end of the test, the sludge washing was performed successfully from approximately 5.6 M to less than 1 M sodium.

  7. An Innovative Method for Dynamic Characterization of Fan Filter Unit Operation.

    E-Print Network [OSTI]

    Xu, Tengfang

    2006-01-01

    large fan-filter units for cleanroom applications. BuildingFeedback Control in a Cleanroom. ” Building and Environment.Fan filter unit (FFU), cleanroom, energy efficiency, airflow

  8. Standard Methods of Characterizing Performance of Fan Filter Units, Version 3.0

    E-Print Network [OSTI]

    Xu, Tengfang

    2007-01-01

    Feedback Control in a Cleanroom. ” Building and Environment.Fan Filter Units for Cleanroom Applications. ” Building andused in the filter and cleanroom industry, and provides

  9. Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2005deerzirker.pdf More Documents & Publications Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles Development of Partial Filter...

  10. Westinghouse standleg moving granular bed filter development program

    SciTech Connect (OSTI)

    Newby, R.A.; Yang, W.C.; Smeltzer, E.E.; Lippert, T.E.

    1994-10-01

    Advanced, coal-based, power plants, such as IGCC and Advanced-PFBC, are currently nearing commercial demonstration. These power plant technologies require hot gas filtration as part of their gas cleaning trains. Ceramic barrier filters are the major filter candidates being developed for these hot gas cleaning applications. While ceramic barrier filters achieve high levels of particle removal, there are concerns for their reliability and operability. An alternative hot gas filtration technology is the moving granular bed filter. These systems are at a lower state of development than ceramic barrier filters, and their effectiveness as filters is still in question. Their apparent attributes, result from their much less severe mechanical design and materials constraints, and the potential for more reliable, failure-free particle removal operation. The standleg moving granular-bed filter (SMGBF) system, is a compact unit that uses cocurrent gas-pellet contacting in an arrangement that greatly simplifies and enhances the distribution of dirty, process gas to the moving bed and allows effective disengagement of clean gas from the moving bed. This paper describes the equipment and process test results.

  11. Moving granular-bed filter development program topical report

    SciTech Connect (OSTI)

    Newby, R.A.; Dilmore, W.J.; Fellers, A.W.; Gasparovic, A.C.; Kittle, W.F.; Lippert, T.E.; Smeltzer, E.E.; Yang, W.C.

    1991-10-17

    The Westinghouse Science Technology Center has proposed a novel moving granular-bed filter concept, the Standleg Moving Granular-Bed Filter (S-MGBF) system, that overcomes the inherent deficiencies of the current state-of-the-art moving granular-bed filter technology. The S-MGBF system combines two unique features that make it highly effective for use in advanced coal-fueled power plants. First, the S-MGBF system applies pelletization technology to generate filter pellets from the power plant solid waste materials, and uses these pellets as a once-through'' filtering media to eliminate the need for costly, complex, and large filter media recycling equipment. This pelletizing step also generates a more environmentally acceptable solid waste product and provides the potential to incorporate gas-phase contaminant sorbents into the filtering media. Secondly, the S-MGBF system passes these pellets and the flyash laden power plant gas through a highly compact S-MGBF that uses cocurrent gas-pellet contacting in an arrangement that greatly simplifies and enhances the distribution of dirty gas to the moving bed and the disengagement of clean gas from the moving bed.

  12. Moving granular-bed filter development program. Topical report

    SciTech Connect (OSTI)

    Newby, R.A.; Yang, W.C.; Smeltzer, E.E.; Lippert, T.E.

    1994-04-01

    Advanced, coal-based, power plants, such as IGCC and Advanced-PFBC, are currently nearing commercial demonstration. These power plant technologies require hot gas filtration as part of their gas cleaning trains. Ceramic barrier filters are the major filter candidates being developed for these hot gas cleaning applications. While ceramic barrier filters achieve high levels of particle removal, concerns exist for their reliability and operability in these applications. An alternative hot gas filtration technology is the moving granular bed filter. An advanced, moving granular bed filter has been conceived, and early development activities performed by the Westinghouse Electric Corporation, Science and Technology Center. This document reports on the Base Contract tasks performed to resolve the barrier technical issues for this technology. The concept, the Standleg Moving Granular Bed Filter (SMGBF) has a concurrent downward, gas and bed media flow configuration that results in simplified features and improved scaleup feasibility compared to alternative designs. Two modes of bed media operation were assessed in the program: once-through using pelletized power plant waste as bed media, and recycle of bed media via standleg and pneumatic transport techniques. Cold Model testing; high-temperature, high-pressure testing; and pelletization testing using advanced power plant wastes, have been conducted in the program. A commercial, economic assessment of the SMGBF technology was performed for IGCC and Advanced-PFBC applications. The evaluation shows that the barrier technical issues can be resolved, and that the technology is potentially competitive with ceramic barrier filters.

  13. Radio Crickets: Chirping Jets from Black Hole Binaries Entering their Gravitational Wave Inspiral

    E-Print Network [OSTI]

    Kulkarni, Girish

    2015-01-01

    We study a novel electromagnetic signature of supermassive black hole binaries whose inspiral starts being dominated by gravitational wave (GW) emission. Recent simulations suggest that the binary's member BHs can continue to accrete gas from the circumbinary accretion disk in this phase of the binary's evolution, all the way until coalescence. If one of the binary members produces a radio jet as a result of accretion, the jet precesses along a biconical surface due to the binary's orbital motion. When the binary enters the GW phase of its evolution, the opening angle widens, the jet exhibits milliarcsecond scale wiggles, and the conical surface of jet precession is twisted due to apparant superluminal motion. The rapidly increasing orbital velocity of the binary gives the jet an appearance of a "chirp." This helical chirping morphology of the jet can be used to infer the binary parameters. For binaries with mass 10^7--10^10 Msun at redshifts z<0.5, monitoring these features in current and archival data wi...

  14. Silver-epoxy microwave filters and thermalizers for millikelvin experiments

    SciTech Connect (OSTI)

    Scheller, Christian P.; Heizmann, Sarah; Bedner, Kristine; Giss, Dominic; Zumbühl, Dominik M., E-mail: dominik.zumbuhl@unibas.ch [Department of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel (Switzerland); Meschke, Matthias [Low Temperature Laboratory, Aalto University, School of Science, 00076 Aalto (Finland); Zimmerman, Jeramy D.; Gossard, Arthur C. [Materials Department, University of California, Santa Barbara, California 93106 (United States)

    2014-05-26

    We present silver-epoxy filters combining excellent microwave attenuation with efficient wire thermalization, suitable for low temperature quantum transport experiments. Upon minimizing parasitic capacitances, the attenuation reaches ?100?dB above ?150?MHz and—when capacitors are added—already above ?30?MHz. We measure the device electron temperature with a GaAs quantum dot and demonstrate excellent filter performance. Upon improving the sample holder and adding a second filtering stage, we obtain electron temperatures as low as 7.5?±?0.2 mK in metallic Coulomb blockade thermometers.

  15. 85-GAL DRUM AND NUCFIL-007LS FILTERS

    SciTech Connect (OSTI)

    JB WOODBURY

    2009-06-30

    {sm_bullet} 55-gallon drums were overpacked into 85-gallon drums {sm_bullet} ANucFiI-007LS long-stem filter was installed- NucFiI certified the use of NucFiI-007LS filters in 8S-gallon drums as DOT 7AType A - Wood wedges were used during the tests to center and . stabilize the inner 55-gallon drums {sm_bullet} During inspection, afew filters were found to be loose, canted, and/or with RTV seals broken - No contamination or loss of container integrity {sm_bullet} Discovered in November 2008 U.

  16. Electrically heated particulate filter with zoned exhaust flow control

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2012-06-26

    A system includes a particulate matter (PM) filter that includes X zones. An electrical heater includes Y heater segments that are associated with respective ones of the X zones. The electrical heater is arranged upstream from and proximate with the PM filter. A valve assembly includes Z sections that are associated with respective ones of the X zones. A control module adjusts flow through each of the Z sections during regeneration of the PM filter via control of the valve assembly. X, Y and Z are integers.

  17. Elevated exhaust temperature, zoned, electrically-heated particulate matter filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Bhatia, Garima [Bangalore, IN

    2012-04-17

    A system includes an electrical heater and a particulate matter (PM) filter that is arranged one of adjacent to and in contact with the electrical heater. A control module selectively increases an exhaust gas temperature of an engine to a first temperature and that initiates regeneration of the PM filter using the electrical heater while the exhaust gas temperature is above the first temperature. The first temperature is greater than a maximum exhaust gas temperature at the PM filter during non-regeneration operation and is less than an oxidation temperature of the PM.

  18. Standleg Moving Granular Bed Filter development program

    SciTech Connect (OSTI)

    Newby, R.A.; Yang, W.C.; Smeltzer, E.E.

    1992-11-01

    The design, fabrication, and installation of the cold flow test facility has been completed. The SMGBF test facility shown in Figure 2 consists of a solids feed hopper, a transparent test vessel, a screw conveyor, a 55-gal drum for solids storage, a dust feeder, a baghouse filter, and the associated instrumentation for flow and pressure control and measurement. The standleg is 11-in ID by 3-ft long, and also transparent to facilitate observation. The crushed acrylic particles of characteristics shown in Table 1 are used as the bed media. The bed particles were selected, by maintaining the particle size while reducing the particle density, to simulate the minimum fluidization velocity expected under high-temperature, high-pressure conditions. By maintaining the particle size, the bed effectively simulates the bed packing and voidage in the moving bed which is directly related to the efficiency of particulate removal and pressure drop characteristics. The test facility performed as designed and no particular difficulties were encountered. The baseline data on pressure profiles across the stationary and the moving granular beds were obtained for gas face velocities up to 6 ft/s, higher than the minimum fluidization velocity of the bed material (5 ft/s), and no visible fluidization was observed at the base of the standleg. This confirms the operational feasibility of the compact SMGBF design.

  19. Standleg Moving Granular Bed Filter development program

    SciTech Connect (OSTI)

    Newby, R.A.; Yang, W.C.; Smeltzer, E.E.

    1992-01-01

    The design, fabrication, and installation of the cold flow test facility has been completed. The SMGBF test facility shown in Figure 2 consists of a solids feed hopper, a transparent test vessel, a screw conveyor, a 55-gal drum for solids storage, a dust feeder, a baghouse filter, and the associated instrumentation for flow and pressure control and measurement. The standleg is 11-in ID by 3-ft long, and also transparent to facilitate observation. The crushed acrylic particles of characteristics shown in Table 1 are used as the bed media. The bed particles were selected, by maintaining the particle size while reducing the particle density, to simulate the minimum fluidization velocity expected under high-temperature, high-pressure conditions. By maintaining the particle size, the bed effectively simulates the bed packing and voidage in the moving bed which is directly related to the efficiency of particulate removal and pressure drop characteristics. The test facility performed as designed and no particular difficulties were encountered. The baseline data on pressure profiles across the stationary and the moving granular beds were obtained for gas face velocities up to 6 ft/s, higher than the minimum fluidization velocity of the bed material (5 ft/s), and no visible fluidization was observed at the base of the standleg. This confirms the operational feasibility of the compact SMGBF design.

  20. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    SCIENCES; POLLUTION CONTROL EQUIPMENT; MAGNETIC FILTERS; GROUND WATER; WATER POLLUTION; PERFORMANCE TESTING; EXPERIMENTAL DATA",,"A commercial device...

  1. Entering Freshmen at Main Campus 3,588 50% were in top 10% of high school class

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Entering Freshmen at Main Campus ­ 3,588 · 50% were in top 10% of high school class · 85% were student population. 2 75% of undergraduates on Main Campus are Connecticut residents. All 169 Connecticut Scores and Retention & Graduation Rates 2014 SAT Scores National Connecticut Main Campus (Critical

  2. RESOLUTIONAGREEMENT This Agreement is entered into between the University of Montana and the U.S. Department of

    E-Print Network [OSTI]

    Chu, Xi

    RESOLUTIONAGREEMENT This Agreement is entered into between the University of Montana and the U. The term electronic and information technology includes, but is not limited to, the internet and intranet websites, content delivered in digital form, electronic books and electronic book reading systems, search

  3. Comparing the College of Charleston to Other Institutions: Admissions-ACT Scores of Entering Freshmen South Carolina Institutions

    E-Print Network [OSTI]

    Kunkle, Tom

    -ACT Scores of Entering Freshmen South Carolina Institutions Aspirational Peers Institutional Research Citadel Military College of South Carolina 36% 21 25 20 25 19 25 Clemson University 36% 26 31 Coastal Carolina University 38% 19 23 University of South CarolinaColumbia 61% 24 29

  4. Endovascular Treatment of a Bleeding Secondary Aorto-Enteric Fistula. A Case Report with 1-Year Follow-up

    SciTech Connect (OSTI)

    Brountzos, Elias N. [Athens University, Medical School, Attikon University Hospital, Second Department of Radiology (Greece)], E-mail: platanos@hol.gr; Vasdekis, Spyros [Athens University, Medical School, Attikon University Hospital, Third Department of Surgery, Division of Vascular Surgery (Greece); Kostopanagiotou, Georgia [Athens University, Medical School, Attikon University Hospital, Department of Anesthesiology (Greece); Danias, Nikolaos [Athens University, Medical School, Attikon University Hospital, Fourth Department of Surgery (Greece); Alexopoulou, Efthymia [Athens University, Medical School, Attikon University Hospital, Second Department of Radiology (Greece); Petropoulou, Konstantina [Athens University, Medical School, Attikon University Hospital, Fourth Department of Surgery (Greece); Gouliamos, Athanasios [Athens University, Medical School, Attikon University Hospital, Second Department of Radiology (Greece); Perros, Georgios [Athens University, Medical School, Attikon University Hospital, Fourth Department of Surgery (Greece)

    2007-09-15

    We report a patient with life-threatening gastrointestinal bleeding caused by a secondary aorto-enteric fistula. Because the patient had several comorbid conditions, we successfully stopped the bleeding by endovascular placement of a bifurcated aortic stent-graft. The patient developed periaortic infection 4 months later, but he was managed with antibiotics. The patient is well 1 year after the procedure.

  5. Letter from the Editor As Arch enters its fourth year of publication and more entrenched in the world

    E-Print Network [OSTI]

    Finzi, Adrien

    Letter from the Editor As Arché enters its fourth year of publication and more entrenched and interests.This year's volume doubts,and then affirms,the real,physical, observable and considered- all it in the work of one of the truly great philosophers, Kant. I hope this year's issue does the task of giving

  6. ight-derived energy enters the biosphere through photosyn-thesis, and ultimately sustains virtually all living organisms.

    E-Print Network [OSTI]

    Sarhan, Fathey

    L ight-derived energy enters the biosphere through photosyn- thesis, and ultimately sustains transformation of the light into reducing power (NADPH) and chemical energy (ATP) and its ultimate utilization and metabolism, exposure of plants to light energy that is in excess of that required for photosynthesis re

  7. The Washington and Lee admissions committee seeks for each entering class a strong core of students whose sincere commitment

    E-Print Network [OSTI]

    Marsh, David

    The Washington and Lee admissions committee seeks for each entering class a strong core of students list, we encourage you to think about our Early Decision application options. The Washington and Lee desire to attend Washington and Lee ­ as evidenced by an Early Decision application ­ will be resolved

  8. EXAMPLE CURRICULUM OUTLINE FOR B.A. MAJOR IN ENVIRONMENTAL GEOLOGY For matriculants entering in odd-numbered years

    E-Print Network [OSTI]

    Turc, Catalin

    EXAMPLE CURRICULUM OUTLINE FOR B.A. MAJOR IN ENVIRONMENTAL GEOLOGY For matriculants entering in odd) SOPHMORE (Even Years) EEPS 110, Physical Geology (3)b EEPS 119, Geology Laboratory (1) PHYS 115 Geology (3) c EEPS 391, Senior Project (2) STAT 201, Basic Statistics for Social and Life Sciences (3

  9. EXAMPLE CURRICULUM OUTLINE FOR B.A. MAJOR IN ENVIRONMENTAL GEOLOGY For matriculants entering in even-numbered years

    E-Print Network [OSTI]

    Turc, Catalin

    EXAMPLE CURRICULUM OUTLINE FOR B.A. MAJOR IN ENVIRONMENTAL GEOLOGY For matriculants entering Activities (0) SOPHMORE (odd years) EEPS 110, Physical Geology (3)b EEPS 119, Geology Laboratory (1) PHYS 115 of Biology (3) STAT 201, Basic Statistics for Social and Life Sciences (3) EEPS 220, Environmental Geology (3

  10. Vol. XXXVII, No. 2 December 2014 New Mexico, entering its fifth straight year of severe drought, can take some solace

    E-Print Network [OSTI]

    Hanley, Kathryn A.

    Vol. XXXVII, No. 2 · December 2014 New Mexico, entering its fifth straight year of severe drought participants attending New Mexico's 59th Annual WRRI Water Conference that historical records show the state Mexico recorded eight straight years of below average annual precipitation. In contrast, below average

  11. Honours Programmes involving Physics and Astronomy, March 2015 Page 1 Entering SH within Physics and Astronomy and Joint Degrees -2015

    E-Print Network [OSTI]

    Greenaway, Alan

    Honours Programmes involving Physics and Astronomy, March 2015 Page 1 Entering SH within Physics subject to University approvals, we plan to offer BSc Mathematics and Physics students a choice of Maths or Physics project. Some details of the modules open to you are in the University's Course Catalogue

  12. Nonlinear Transformations and Filtering Theory for Space Operations 

    E-Print Network [OSTI]

    Weisman, Ryan Michael 1984-

    2012-11-19

    the state domain probability density function yielding a form which does not necessarily resemble the form assumed in the filtering algorithm. The distortion effect must be understood in greater detail and appropriately accounted for so that even if sensors...

  13. Optimization of multiplexed holographic gratings for spectralspatial imaging filters

    E-Print Network [OSTI]

    Barton, Jennifer K.

    filters, since the material can be formed with mini- mal shrinkage and refractive index change after pro selectivity. The mixture is poured into a mold similar to that shown in Fig. 1, consisting of two glass plates

  14. Shadow Information Spaces: Combinatorial Filters for Tracking Targets

    E-Print Network [OSTI]

    LaValle, Steven M.

    of Computer Science University of Illinois University of Illinois Urbana, IL 61801 USA Urbana, IL 61801 USA. In particular, we introduce the notion of filters over shadow in- formation spaces for tracking moving targets

  15. OPTICAL CROSS-CORRELATION FILTERS: AN ECONOMICAL APPROACH FOR...

    Office of Scientific and Technical Information (OSTI)

    in speed of up to approx30 times. This approach is also insensitive to host galaxy contamination. Prototype filters were built and successfully used on Magellan with LDSS-3 to...

  16. A Transmission-Filter Coronagraph: Design and Test

    E-Print Network [OSTI]

    Ren, Deqing; Zhu, Yongtian

    2015-01-01

    We propose a transmission-filter coronagraph for direct imaging of Jupiter-like exoplanets with ground-based telescopes. The coronagraph is based on a transmission filter that consists of finite number of transmission steps. A discrete optimization algorithm is proposed for the design of the transmission filter that is optimized for ground-based telescopes with central obstructions and spider structures.We discussed the algorithm that is applied for our coronagraph design. To demonstrate the performance of the coronagraph, a filter was manufactured and laboratory tests were conducted. The test results show that the coronagraph can achieve a high contrast of 10 to -6.5 at an inner working angle of 5{\\lambda}/D, which indicates that our coronagraph can be immediately used for the direct imaging of Jupiter-like exoplanets with ground-based telescopes.

  17. An improved method for weighted least squares IIR filter design 

    E-Print Network [OSTI]

    Davila-Pazmino, Javier

    1999-01-01

    Recently, a new method for IIR weighted least squares filter design has been proposed. In this method, the problem of approximating a desired frequency response using a rational function is solved using an iterative approach. ...

  18. Dynamic Filtering and Mining Triggers in Mesoscale Meteorology Forecasting

    E-Print Network [OSTI]

    Plale, Beth

    Dynamic Filtering and Mining Triggers in Mesoscale Meteorology Forecasting Nithya N. Vijayakumar {rramachandran, xli}@itsc.uah.edu Abstract-- Mesoscale meteorology forecasting as a data driven application Triggers, Data Mining, Stream Processing, Meteorology Forecasting I. INTRODUCTION Mesoscale meteorologists

  19. Design of efficient digital interpolation filters for integer upsampling

    E-Print Network [OSTI]

    Turek, Daniel B. (Daniel Bernard), 1980-

    2004-01-01

    Digital signal interpolation systems can be implemented in a variety of ways. The most basic interpolation system for integer upsampling cascades an expander unit with an interpolation low-pass filter. More complex ...

  20. Simple filtered repetitively pulsed vacuum arc plasma source

    SciTech Connect (OSTI)

    Chekh, Yu.; Zhirkov, I. S.; Delplancke-Ogletree, M. P.

    2010-02-15

    A very simple design of cathodic filtered vacuum arc plasma source is proposed. The source without filter has only four components and none of them require precise machining. The source operates in a repetitively pulsed regime, and for laboratory experiments it can be used without water cooling. Despite the simple construction, the source provides high ion current at the filter outlet reaching 2.5% of 400 A arc current, revealing stable operation in a wide pressure range from high vacuum to oxygen pressure up to more than 10{sup -2} mbar. There is no need in complicated power supply system for this plasma source, only one power supply can be used to ignite the arc, to provide the current for the arc itself, to generate the magnetic field in the filter, and provide its positive electric biasing without any additional high power resistance.

  1. A Hybrid-Filter Approach to Turbulence Simulation

    E-Print Network [OSTI]

    Rajamani, Bernie; Kim, John

    2010-01-01

    M. : Properties of the hybrid RANS/LES filter. Theor.1765 (1991) 6. Hamba, F. : A hybrid RANS/LES simulation of2003) 12. Rajamani, B. : Hybrid RANS-LES modeling of High-Re

  2. Low Power Filtering Techniques for Wideband and Wireless Applications 

    E-Print Network [OSTI]

    Gambhir, Manisha

    2010-10-12

    This dissertation presents design and implementation of continuous time analog filters for two specific applications: wideband analog systems such as disk drive channel and low-power wireless applications. Specific focus has been techniques...

  3. EFFICIENT DESIGN OF LINEAR HIGH-FREQUENCY FILTERS 

    E-Print Network [OSTI]

    Choudhury, Diganto

    2012-04-19

    -conversion receivers offer the advantage of omitting the intermediate stage required in heterodyne architectures, thereby greatly reducing the hardware complexity of receiver design. In this research, a higher order filtering technique is proposed to attenuate out...

  4. Biological Manganese Oxidation by Pseudomonas putida in Trickling Filters 

    E-Print Network [OSTI]

    McKee, Kyle Patrick

    2015-02-10

    viable alternative for removing undesired chemicals from drinking water. In this study, bench scale trickling filters were constructed to compare the Mn removal efficiency between biochemical and abiotic processes. Glass beads between three and five...

  5. AVTA: Oil Bypass Filter Specifications and Test Procedures

    Broader source: Energy.gov [DOE]

    PuraDYN Oil Bypass Filtration System Evaluation Test Plan methodology is used in the testing of all oil bypass filters on the buses at the Idaho National Laboratory.

  6. SVM-RFE With MRMR Filter for Gene Selection

    E-Print Network [OSTI]

    Mundra, Piyushkumar A.

    We enhance the support vector machine recursive feature elimination (SVM-RFE) method for gene selection by incorporating a minimum-redundancy maximum-relevancy (MRMR) filter. The relevancy of a set of genes are measured ...

  7. Evaluation of Mil-F-28861 filters and suppliers

    SciTech Connect (OSTI)

    Grieco, S.E. [Sandia National Labs., Albuquerque, NM (United States). Component Information and Management Dept.

    1994-09-01

    Over the last 20 years, a family of lowpass filters has been developed to eliminate electromechanical interference from power and signal lines in weapon systems. Since its inception, Sprague Electric in North Adams, Massachusetts, has produced this family of components on a line dedicated solely to these devices. Although at least seven other companies produce similar filters, suppliers are unwilling to build small quantities of components in a manner that is incompatible with their standard methods and equipment. The ability to fabricate products in small quantities on an occasional basis is an important factor in component development, and compatibility with commercially available devices enhances that ability. The Mil-F-28861/5 specifications, developed by the Defense Electronic Parts Supply Center, describe filters similar to those of the MC family. This report documents the evaluation of Mil-F-28861/5 filters acquired from the eight suppliers and serves as a basis for further development of specifications and suppliers.

  8. Source-Filter Separation for Articulation-to-Speech Synthesis 

    E-Print Network [OSTI]

    Shiga, Yoshinori; King, Simon

    In this paper we examine a method for separating out the vocal-tract filter response from the voice source characteristic using a large articulatory database. The method realises such separation for voiced speech using an ...

  9. Reading out population codes with a matched filter 

    E-Print Network [OSTI]

    van Rossum, Mark; Renart, Alfonso; Nelson, Sacha; Wang, X.-J.; Turrigiano, Gina G.

    2001-01-01

    We study the optimal way to decode information present in a population code. Using a matched filter, the performance in Gaussian additive noise is as good as the theoretical maximum. The scheme can be applied when ...

  10. A Hybrid Ensemble Kalman Filter for Nonlinear Dynamics 

    E-Print Network [OSTI]

    Watanabe, Shingo

    2011-02-22

    In this thesis, we propose two novel approaches for hybrid Ensemble Kalman Filter (EnKF) to overcome limitations of the traditional EnKF. The first approach is to swap the ensemble mean for the ensemble mode estimation to ...

  11. Physics prospects of UV-filtered overlap quarks

    E-Print Network [OSTI]

    Stephan Durr; Christian Hoelbling; Urs Wenger

    2005-11-22

    Some key features of the overlap operator with a UV-filtered Wilson kernel are discussed. The first part concerns spectral properties of the underlying shifted hermitean Wilson operator and the relation to the observed speedup of the overlap construction. Next, the localization of the filtered overlap and its axial-vector renormalization constant are discussed. Finally, results of an exploratory scaling study for $m_{ud}, m_s$ and $f_\\pi, f_K$ are presented.

  12. Shielded regeneration heating element for a particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-01-04

    An exhaust system includes a particulate filter (PF) that is disposed downstream from an engine. The PF filters particulates within an exhaust from the engine. A heating element heats particulate matter in the PF. A catalyst substrate or a flow converter is disposed upstream from said heating element. The catalyst substrate oxidizes the exhaust prior to reception by the heating element. The flow converter converts turbulent exhaust flow to laminar exhaust flow prior to reception by the heating element.

  13. Stabilization void-fill encapsulation high-efficiency particulate filters

    SciTech Connect (OSTI)

    Alexander, R.G.; Stewart, W.E.; Phillips, S.J.; Serkowski, M.M.; England, J.L.; Boynton, H.C.

    1994-05-01

    This report discusses high-efficiency particulate air (HEPA) filter systems that which are contaminated with radionuclides are part of the nuclear fuel processing systems conducted by the US Department of Energy (DOE) and require replacement and safe and efficient disposal for plant safety. Two K-3 HEPA filters were removed from service, placed burial boxes, buried, and safely and efficiently stabilized remotely which reduced radiation exposure to personnel and the environment.

  14. Microwave mode shifting antenna system for regenerating particulate filters

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA; Gregoire, Daniel J [Thousand Oaks, CA

    2011-04-26

    A regeneration system comprises a particulate matter (PM) filter including a microwave energy absorbing surface, and an antenna system comprising N antennas and an antenna driver module that sequentially drives the antenna system in a plurality of transverse modes of the antenna system to heat selected portions of the microwave absorbing surface to regenerate the PM filter, where N is an integer greater than one. The transverse modes may include transverse electric (TE) and/or transverse magnetic (TM) modes.

  15. Zone heated inlet ignited diesel particulate filter regeneration

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2012-06-26

    An exhaust system that processes exhaust generated by an engine is provided. The system includes: a particulate filter (PF) that is disposed downstream of the engine and that filters particulates from the exhaust; and a grid that includes electrically resistive material that is segmented by non-conductive material into a plurality of zones and wherein the grid is applied to an exterior upstream surface of the PF.

  16. The design of laser trimmable temperature invariant active NMOS filters 

    E-Print Network [OSTI]

    Rybicki, Mathew Anton

    1983-01-01

    THE DESIGN OF LASER TRIMMABLE TEMPERATURE INVARIANT ACTIVE NMOS FILTERS A Thesis MATHEW ANTON RYBICKI Submitted to the Graduate College of Teras A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1983 Major Subject: Electrical Engineering THE DESIGN OF LASER TRIMMABLE TEMPERA'IURE INVARIANT ACTIVE NMOS FILTERS A Thesis by MATHEW ANTON RYBICKI Approved as to style and content by: Randall L. Geiger (Chairman of Committee) Phil ip ED...

  17. Performance characterization of a packed bed electro-filter 

    E-Print Network [OSTI]

    Narayanan, Ajay

    1990-01-01

    PERFORMANCE CHARACTERIZATION OF A PACKED BED ELECTRO-FILTER A Thesis by A JAY NARAYANAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1990 Major Subject: Safety Engineering PERFORMANCE CHARACTERIZATION OF A PACKED BED ELECTRO-FILTER A Thesis by AJAY NARAYANAN Approved as to style and content by: John P. Wagn (Ch ' of the Com ittee) Aydin Akgerman (Member) Ri ard B...

  18. Coefficient quantization effects in block state variable digital filters 

    E-Print Network [OSTI]

    Lee, Kab Joo

    1991-01-01

    COEFFICIENT QUANTIZATION EFFECTS IN BLOCK STATE VARIABLE DIGITAL FILTERS A Thesis by KAB JOO LEE Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 1991 Major Subject: Electrical Engineering COEFFICIENT QIJANTIZATIOU EFFECTS IN l3LOCI~ STATE VARIABLE DIGITAL FILTERS A Thesis hs IiAB JOO LEE Approved as to style and content by: WVilliam G. )3liss (Chair of Comnaittee) Norman C...

  19. Rayleigh wave filter for three-component seismic data 

    E-Print Network [OSTI]

    Zaidi, Syed Ali Asif

    1991-01-01

    RAYLEIGH WAVE FILTER FOR THREE ? COMPONENT SEISMIC DATA A Thesis by SYED ALI ASIF ZAIDI Submitted to the Office of Graduate Studies of Texas A&M Lrniversity in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1991 Major Subject: Geophysics RAYLEIGH WAVE FILTER FOR THREE ? COMPONENT SEISMIC DATA A Thesis SYED ALI ASIF ZAIDI Approved as to style and content by: Steven . Harder air of Committee) Joel S. Watkins (Member) Ronald M. Brimhall (1...

  20. Diesel particulate filter regeneration via resistive surface heating

    DOE Patents [OSTI]

    Gonze, Eugene V; Ament, Frank

    2013-10-08

    An exhaust system that processes exhaust generated by an engine is provided. The system includes: a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine; and a grid of electrically resistive material that is applied to an exterior upstream surface of the PF and that selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF.

  1. FIONDA (Filtering Images of Niobium Disks Application): Filter application for Eddy Current Scanner data analysis

    SciTech Connect (OSTI)

    Boffo, C.; Bauer, P.; /Fermilab

    2005-05-01

    As part of the material QC process, each Niobium disk from which a superconducting RF cavity is built must undergo an eddy current scan [1]. This process allows to discover embedded defects in the material that are not visible to the naked eye because too small or under the surface. Moreover, during the production process of SC cavities the outer layer of Nb is removed via chemical or electro-chemical etching, thus it is important to evaluate the quality of the subsurface layer (in the order of 100nm) where superconductivity will happen. The reference eddy current scanning machine is operated at DESY; at Fermilab we are using the SNS eddy current scanner on loan, courtesy of SNS. In the past year, several upgrades were implemented aiming at raising the SNS machine performance to that of the DESY reference machine [2]. As part of this effort an algorithm that enables the filtering of the results of the scans and thus improves the resolution of the process was developed. The description of the algorithm and of the software used to filter the scan results is presented in this note.

  2. Optical-mechanical operation of the F2T2 Filter: a tunable filter designed to search for First Light

    E-Print Network [OSTI]

    Erin Mentuch; Alan Scott; Roberto Abraham; Elizabeth Barton; Matthew Bershady; Joss Bland-Hawthorn; David Crampton; Rene Doyon; Steve Eikenberry; Mike Gladders; Karl Glazebrook; Joe Jenson; Jeff Julian; Roger Julian; Jean-Paul Kneib; David Loop; Nick Raines; Neil Rowlands; J. D. Smith

    2008-09-03

    The Flamingos-2 Tandem Tunable filter is a tunable, narrow-band filter, consisting of two Fabry-Perot etalons in series, capable of scanning to any wavelength from 0.95 to 1.35 microns with a spectral resolution of R~800. It is an accessory mode instrument for the near-IR Flamingos-2 imaging-spectrograph designed for the Gemini South 8m Observatory and will be fed through the upcoming Multi-Conjugate Adaptive Optics feed. The primary science goal of the F2T2 filter is to perform a ground-based search for the first star forming regions in the universe at redshifts of 7 < z < 11. The construction of the F2T2 filter is complete and it is currently in its calibration and commissioning phases. In this proceeding, we describe the calibration and performance of the instrument.

  3. Flexible Visual Authoring Using Operation History

    E-Print Network [OSTI]

    Su, Sara

    Flexible Visual Authoring Using Operation History Sara Su Massachusetts Institute of Technology l Revisiting history Storing and retrieving state Hierarchical authoring Grouping, structure, selections #12;Operations and selections today Uses of history System activity logs, instrumentation (not our focus

  4. H Filtering with Inequality Constraints for Aircraft Turbofan Engine Health Estimation

    E-Print Network [OSTI]

    Simon, Dan

    shows how inequality-constrained H filtering can be applied to aircraft engine health estimation the inequality-constrained H filter can be reduced to a standard H filter combined with a quadratic programming health parameter estimation. This paper applies inequality-constrained H filtering to estimate aircraft

  5. Multi-target pitch tracking of vibrato sources in noise using the GM-PHD filter

    E-Print Network [OSTI]

    Plumbley, Mark

    Multi-target pitch tracking of vibrato sources in noise using the GM-PHD filter Dan Stowell the Gaussian mix- ture PHD filter (GM-PHD filter), using a Gaussian mixture (GM) to represent state and having improved performance (Vo & Ma, 2006; Mahler, 2007). The GM-PHD filter has similarities to a HMM- or Kalman

  6. GM-Ford-Chrysler: Allocating Loan Authority

    Broader source: Energy.gov [DOE]

    Statement from GM, Ford, and Chrysler: "Allocating the $25 Billion in Direct Loan Authority to Loan Applicants"

  7. State authorization manual. Volume 2. Appendices

    SciTech Connect (OSTI)

    Brugler-Jones, S.

    1990-10-01

    The document provides the supportive appendices for Volume 1 of the State Authorization Manual (SAM), which provides guidance for States applying for program revisions to their authorized RCRA State program. Among the appendices are: various program checklists, lists of revision checklists by cluster, model Federal Register Notices, guidance for State Authorization Files, and guidance for using Wordperfect files and for CFR files.

  8. Criteria for calculating the efficiency of HEPA filters during and after design basis accidents

    SciTech Connect (OSTI)

    Bergman, W.; First, M.W.; Anderson, W.L.; Gilbert, H.; Jacox, J.W.

    1994-12-01

    We have reviewed the literature on the performance of high efficiency particulate air (HEPA) filters under normal and abnormal conditions to establish criteria for calculating the efficiency of HEPA filters in a DOE nonreactor nuclear facility during and after a Design Basis Accident (DBA). The literature review included the performance of new filters and parameters that may cause deterioration in the filter performance such as filter age, radiation, corrosive chemicals, seismic and rough handling, high temperature, moisture, particle clogging, high air flow and pressure pulses. The deterioration of the filter efficiency depends on the exposure parameters; in severe exposure conditions the filter will be structurally damaged and have a residual efficiency of 0%. Despite the many studies on HEPA filter performance under adverse conditions, there are large gaps and limitations in the data that introduce significant error in the estimates of HEPA filter efficiencies under DBA conditions. Because of this limitation, conservative values of filter efficiency were chosen when there was insufficient data.

  9. Fuel Efficient Diesel Particulate Filter (DPF) Modeling and Development

    SciTech Connect (OSTI)

    Stewart, Mark L.; Gallant, Thomas R.; Kim, Do Heui; Maupin, Gary D.; Zelenyuk, Alla

    2010-08-01

    The project described in this report seeks to promote effective diesel particulate filter technology with minimum fuel penalty by enhancing fundamental understanding of filtration mechanisms through targeted experiments and computer simulations. The overall backpressure of a filtration system depends upon complex interactions of particulate matter and ash with the microscopic pores in filter media. Better characterization of these phenomena is essential for exhaust system optimization. The acicular mullite (ACM) diesel particulate filter substrate is under continuing development by Dow Automotive. ACM is made up of long mullite crystals which intersect to form filter wall framework and protrude from the wall surface into the DPF channels. ACM filters have been demonstrated to effectively remove diesel exhaust particles while maintaining relatively low backpressure. Modeling approaches developed for more conventional ceramic filter materials, such as silicon carbide and cordierite, have been difficult to apply to ACM because of properties arising from its unique microstructure. Penetration of soot into the high-porosity region of projecting crystal structures leads to a somewhat extended depth filtration mode, but with less dramatic increases in pressure drop than are normally observed during depth filtration in cordierite or silicon carbide filters. Another consequence is greater contact between the soot and solid surfaces, which may enhance the action of some catalyst coatings in filter regeneration. The projecting crystals appear to provide a two-fold benefit for maintaining low backpressures during filter loading: they help prevent soot from being forced into the throats of pores in the lower porosity region of the filter wall, and they also tend to support the forming filter cake, resulting in lower average cake density and higher permeability. Other simulations suggest that soot deposits may also tend to form at the tips of projecting crystals due to the axial velocity component of exhaust moving down the filter inlet channel. Soot mass collected in this way would have a smaller impact on backpressure than soot forced into the flow restrictions deeper in the porous wall structure. This project has focused on the development of computational, analytical, and experimental techniques that are generally applicable to a wide variety of exhaust aftertreatment technologies. By helping to develop improved fundamental understanding pore-scale phenomena affecting filtration, soot oxidation, and NOX abatement, this cooperative research and development agreement (CRADA) has also assisted Dow Automotive in continuing development and commercialization of the ACM filter substrate. Over the course of this research project, ACM filters were successfully deployed on the Audi R10 TDI racecar which won the 24 Hours of LeMans endurance race in 2006, 2007, and 2008; and the 12 Hours of Sebring endurance race in 2006 and 2007. It would not have been possible for the R10 to compete in these traditionally gasoline-dominated events without reliable and effective exhaust particulate filtration. These successes demonstrated not only the performance of automotive diesel engines, but the efficacy of DPF technology as it was being deployed around the world to meet new emissions standards on consumer vehicles. During the course of this CRADA project, Dow Automotive commercialized their ACM DPF technology under the AERIFYTM DPF brand.

  10. Oblique inlet pressure loss for swirling flow entering a catalyst substrate

    SciTech Connect (OSTI)

    Persoons, T.; Vanierschot, M.; Van den Bulck, E. [Katholieke Universiteit Leuven, Department of Mechanical Engineering, Celestijnenlaan 300A, B-3001 Leuven (Belgium)

    2008-05-15

    This experimental study investigates the oblique inlet pressure loss for the entry of an annular swirling flow into an automotive catalyst substrate. The results are applicable to a wide range of compact heat exchangers. For zero swirl, the total pressure loss agrees with established expressions for pressure loss in developing laminar flow in parallel channels with finite wall thickness. For positive swirl, the additional pressure loss due to oblique flow entry is correlated to the tangential velocity upstream of the catalyst, measured using laser-Doppler anemometry. The obtained oblique inlet pressure loss correlation can improve the accuracy of numerical calculations of the flow distribution in catalysts. (author)

  11. Plan Amendment Language for the Moratorium on Vessels Entering The Commercial King and Tanner Crab Fisheries in the Bering Sea/Aleutian Islands

    E-Print Network [OSTI]

    Plan Amendment Language for the Moratorium on Vessels Entering The Commercial King and Tanner Crab fishing permits are required for harvesting vessels, except as required by the Moratorium on new vessels contained in Section 8.1.4 would be deleted. A new section 8.1.4.1 titled "Moratorium on Vessels Entering

  12. Magnetic filtration process, magnetic filtering material, and methods of forming magnetic filtering material

    DOE Patents [OSTI]

    Taboada-Serrano, Patricia; Tsouris, Constantino; Contescu, Cristian I; McFarlane, Joanna

    2013-10-08

    The present invention provides magnetically responsive activated carbon, and a method of forming magnetically responsive activated carbon. The method of forming magnetically responsive activated carbon typically includes providing activated carbon in a solution containing ions of ferrite forming elements, wherein at least one of the ferrite forming elements has an oxidation state of +3 and at least a second of the ferrite forming elements has an oxidation state of +2, and increasing pH of the solution to precipitate particles of ferrite that bond to the activated carbon, wherein the activated carbon having the ferrite particles bonded thereto have a positive magnetic susceptibility. The present invention also provides a method of filtering waste water using magnetic activated carbon.

  13. Date Created: 2/5/2014 9:35:00 AM Page 1 Enter a Scholarship Payment

    E-Print Network [OSTI]

    Calgary, University of

    Date Created: 2/5/2014 9:35:00 AM Page 1 Enter a Scholarship Payment Purpose Use this transaction Information link. Click the Scholarship Payments link. #12;#12;Date Created: 2/5/2014 9:35:00 AM Page 3 Date Created: 2/5/2014 9:35:00 AM Complete the following steps: Step Action View payments 11. You can

  14. Analysis, Dimensioning and Robust Control of Shunt Active Filter for Harmonic Currents Compensation in Electrical Mains

    E-Print Network [OSTI]

    Tilli, Andrea; Conficoni, Christian

    2011-01-01

    In this chapter some results related to Shunt Active Filters (SAFs) and obtained by the authors and some coauthors are reported. SAFs are complex power electronics equipments adopted to compensate for cur-rent harmonic pollution in electric mains, due to nonlinear loads. By using a proper "floating" capacitor as energy reservoir, the SAF purpose is to inject in the line grid currents canceling the polluting har-monics. Control algorithms play a key role for such devices and, in general, in many power electronics applications. Moreover, systems theory is crucial, since it is the mathematical tool that enables a deep understanding of the involved dynamics of such systems, allowing a correct dimensioning, beside an effective control. As a matter of facts, current injection objective can be straightforwardly formulated as an output tracking control problem. In this fashion, the structural and insidious marginally-stable internal/zero dynamics of SAFs can be immediately highlighted and characterized in terms of si...

  15. Synthesis of anisotropic swirling surface acoustic waves by inverse filter, towards integrated generators of acoustical vortices

    E-Print Network [OSTI]

    Riaud, Antoine; Charron, Eric; Bussonnière, Adrien; Matar, Olivier Bou

    2015-01-01

    From radio-electronics signal analysis to biological samples actuation, surface acoustic waves (SAW) are involved in a multitude of modern devices. Despite this versatility, SAW transducers developed up to date only authorize the synthesis of the most simple standing or progressive waves such as plane and focused waves. In particular, acoustical integrated sources able to generate acoustical vortices (the analogue of optical vortices) are missing. In this work, we propose a flexible tool based on inverse filter technique and arrays of SAW transducers enabling the synthesis of prescribed complex wave patterns at the surface of anisotropic media. The potential of this setup is illustrated by the synthesis of a 2D analog of 3D acoustical vortices, namely "swirling surface acoustic waves". Similarly to their 3D counterpart, they appear as concentric structures of bright rings with a phase singularity in their center resulting in a central dark spot. Swirling SAW can be useful in fragile sensors whose neighborhood...

  16. A few words about intermodulation dynamic range and roofing filters: "Roofing filter" is the current buzzword in high-end radios. Just what does it

    E-Print Network [OSTI]

    Allen, Gale

    A few words about intermodulation dynamic range and roofing filters: "Roofing filter" is the current buzzword in high-end radios. Just what does it mean? Basically, a roofing filter is simply to be effective. The term "roofing" stems from the fact that it protects the rest of the radio following it from

  17. Lubricant wear particle analysis by filter patch extraction

    SciTech Connect (OSTI)

    Smart, C.L.

    1996-07-01

    Lubricating Oil Analysis (LOA) has become an important part of a comprehensive Reliability Centered Maintenance (RCM) program. However, knowing the condition of the lubricant alone does not provide a complete description of equipment reliability. Condition monitoring for equipment can be accomplished through Wear Particle Analysis (WPA). This usually involves separating suspended materials and wear products from the lubricant by magnetic (ferrographic) means. This paper will present a simple, low-cost, alternate method of particle acquisition called Filter Patch Extraction (FPE). This method removes solids, regardless of their composition, from the lubricant by vacuum filtration and deposits them onto a filter for microscopic examination similar to that of analytical ferrography. A large filter pore size retains suspended materials and permits rapid filtration of large volumes of lubricant thereby increasing the accuracy of the wear and cleanliness profile that can be established for a given machine. Qualitative trending of equipment wear and lubricant system cleanliness are easily performed with FPE. Equipment condition is determined by then characterizing the metal particles which are recovered. Examined filters are easily archived in filter holders for future reference. Equipment for FPE is inexpensive and readily available. The technique is field-portable, allowing WPA to be performed on-site, eliminating delays with remote laboratories while building customer participation and support. There are numerous advantages for using FPE in a machine condition monitoring program.

  18. Development of A Microwave Assisted Particulate Filter Regeneration System

    SciTech Connect (OSTI)

    Popuri, Sriram

    2001-08-05

    The need for active regeneration of diesel particulate filters and the advantages of microwave assisted regeneration are discussed. The current study has multiple objectives, which include developing a microwave assisted particulate filter regeneration system for future generation light-duty diesel applications, including PNGV type applications. A variable power 2.0 kW microwave system and a tuned waveguide were employed. Cavity geometry is being optimized with the aid of computational modeling and temperature measurements during microwave heating. A wall-flow ceramic-fiber filter with superior thermal shock resistance, high filtration efficiency, and high soot capacity was used. The microwave assisted particulate filter regeneration system has operated for more than 100 hours in an engine test-cell with a 5.9-liter diesel engine with automated split exhaust flow and by-pass flow capabilities. Filter regeneration was demonstrated using soot loads up to 10 g/liter and engine exhaust at idling flow rates as the oxygen source. A parametric study to determine the optimal combination of soot loading, oxidant flow rate, microwave power and heating time is underway. Preliminary experimental results are reported.

  19. Use of Retrievable Compared to Permanent Inferior Vena Cava Filters: A Single-Institution Experience

    SciTech Connect (OSTI)

    Ha, Thuong G. Van [University of Chicago, Department of Radiology, Section of Vascular and Interventional Radiology (United States)], E-mail: tgvanha@uchicago.edu; Chien, Andy S. [Pritzker School of Medicine, University of Chicago (United States); Funaki, Brian S.; Lorenz, Jonathan [University of Chicago, Department of Radiology, Section of Vascular and Interventional Radiology (United States); Piano, Giancarlo [University of Chicago, Department of Surgery (United States); Shen, Maxine [Pritzker School of Medicine, University of Chicago (United States); Leef, Jeffrey [University of Chicago, Department of Radiology, Section of Vascular and Interventional Radiology (United States)

    2008-03-15

    The purpose of this study was to review the use, safety, and efficacy of retrievable inferior vena cava (IVC) filters in their first 5 years of availability at our institution. Comparison was made with permanent filters placed in the same period. A retrospective review of IVC filter implantations was performed from September, 1999, to September, 2004, in our department. These included both retrievable and permanent filters. The Recovery nitinol and Guenther tulip filters were used as retrievable filters. The frequency of retrievable filter used was calculated. Clinical data and technical data related to filter placement were reviewed. Outcomes, including pulmonary embolism, complications associated with placement, retrieval, or indwelling, were calculated. During the study period, 604 IVC filters were placed. Of these, 97 retrievable filters (16%) were placed in 96 patients. There were 53 Recovery filter and 44 Tulip filter insertions. Subjects were 59 women and 37 men; the mean age was 52 years, with a range of from 18 to 97 years. The placement of retrievable filters increased from 2% in year 1 to 32% in year 5 of the study period. The total implantation time for the permanent group was 145,450 days, with an average of 288 days (range, 33-1811 days). For the retrievable group, the total implantation time was 21,671 days, with an average of 226 days (range, 2-1217 days). Of 29 patients who returned for filter retrieval, the filter was successfully removed in 28. There were 14 of 14 successful Tulip filter retrievals and 14 of 15 successful Recovery filter retrievals. In one patient, after an indwelling period of 39 days, a Recovery nitinol filter could not be removed secondary to a large clot burden within the filter. For the filters that were removed, the mean dwell time was 50 days for the Tulip type and 20 days for the Recovery type. Over the follow-up period there was an overall PE incidence of 1.4% for the permanent group and 1% for the retrieval group. In conclusion, there was an increase in the use of retrievable filters over the study period and an overall increase in the total number of filters implanted. The increased use of these filters appeared to be due to expanded indications predicated by their retrievability. Placement and retrieval of these filters have a low risk of complications, and retrievable filters appeared effective, as there was low rate of clinically significant pulmonary embolism associated with these filters during their indwelling time.

  20. Standing Delegations of Authority as at 1 December 2014 1 STANDING DELEGATIONS OF AUTHORITY

    E-Print Network [OSTI]

    University of Technology, Sydney

    Standing Delegations of Authority as at 1 December 2014 1 STANDING DELEGATIONS OF AUTHORITY 1 the Delegation Principles outlined on pages 5 and 6. Any questions about the interpretation of the Standing Delegations of Authority, suggestions for amendment of the Standing Delegations of Authority and requests

  1. A new closing method for wall flow diesel particulate filters

    SciTech Connect (OSTI)

    Stobbe, P.; Petersen, H.G.; Sorenson, S.C.; Hoej, J.W.

    1996-09-01

    A new method has been developed to close the ends of a wall flow filter used for removing particulate matter from diesel engine exhaust. In this method, the ends of the honeycomb structure are capped by deforming and closing the ends of the channel walls between the extrusion and firing stages of production. The method increases the amount of filtration area per filter volume for a given cell geometry compared to the traditional plugging method, since the entire length of the honeycomb channels is used for filtration purposes. In addition, use of the capping method has a beneficial effect on the pressure loss characteristics of a filter with a given filtration area. These benefits are illustrated through experimental results.

  2. Multichannel matched filtering for spherical gravitational wave antennas

    E-Print Network [OSTI]

    Costa, Carlos Filipe Da Silva; Sturani, Riccardo

    2009-01-01

    We study the performance of a multidimensional matched filter as a follow-up module of the coherent method recently developed by two of us for the detection of gravitational wave bursts by spherical resonant detectors. We have tested this strategy on the same set of injections used for the coherent method and found that the matched filter sensibly improves the determination of relevant parameters as the arrival time, amplitude, central frequency and arrival direction of the signal. The matched filter also improves the false alarm rate, reducing it roughly by a factor of 3. The hierarchical structure of the whole analysis pipeline allows to obtain these results without a significant increase of the computation time.

  3. Optical Deformations in Solar Glass Filters for High Precision Astrometry

    E-Print Network [OSTI]

    Sigismondi, Costantino; Boscardin, Sérgio Calderari; Penna, Jucira Lousada; Reis-Neto, Eugênio

    2015-01-01

    Measuring the solar diameter at all position angles gives the complete figure of the Sun. Their asphericities have implications in classical physics and general relativity, and the behavior of the optical systems used in the direct measurements is to be known accurately. A solar filter is a plane-parallel glass with given absorption, and here we study the departures from the parallelism of the faces of a crystal slab 5 mm thick, because of static deformations. These deformations are rescaled to the filter's dimensions. Related to the Solar Disk Sextant experiment and to the Reflecting Heliometer of Rio de Janeiro a simplified model of the influences of the inclination between the external and the internal surfaces of a glass solar filter, is discussed.

  4. National Training and Education Resource Advanced Authoring Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Authoring Training Participant Guide NTER Advanced Authoring Training Participant Guide (032012 pw) 2 Contents OBJECTIVES ......

  5. Development of active porous medium filters based on plasma textiles

    SciTech Connect (OSTI)

    Kuznetsov, Ivan A.; Saveliev, Alexei V.; Rasipuram, Srinivasan; Kuznetsov, Andrey V.; Brown, Alan; Jasper, Warren

    2012-05-15

    Inexpensive, flexible, washable, and durable materials that serve as antimicrobial filters and self-decontaminating fabrics are needed to provide active protection to people in areas regularly exposed to various biohazards, such as hospitals and bio research labs working with pathogens. Airlines and cruise lines need such material to combat the spread of infections. In households these materials can be used in HVAC filters to fight indoor pollution, which is especially dangerous to people suffering from asthma. Efficient filtering materials are also required in areas contaminated by other types of hazardous dust particulates, such as nuclear dust. The primary idea that guided the undertaken study is that a microplasma-generating structure can be embedded in a textile fabric to generate a plasma sheath (''plasma shield'') that kills bacterial agents coming in contact with the fabric. The research resulted in the development of a plasma textile that can be used for producing new types of self-decontaminating garments, fabrics, and filter materials, capable of activating a plasma sheath that would filter, capture, and destroy any bacteriological agent deposited on its surface. This new material relies on the unique antimicrobial and catalytic properties of cold (room temperature) plasma that is benign to people and does not cause thermal damage to many polymer textiles, such as Nomex and polypropylene. The uniqueness of cold plasma as a disinfecting agent lies in the inability of bacteria to develop resistance to plasma exposure, as they can for antibiotics. Plasma textiles could thus be utilized for microbial destruction in active antimicrobial filters (for continuous decontamination and disinfection of large amounts of air) as well as in self-decontaminating surfaces and antibacterial barriers (for example, for creating local antiseptic or sterile environments around wounds and burns).

  6. Advanced Energy-Efficient Filtration: Fan Filter Unit

    SciTech Connect (OSTI)

    Xu, Tengfang

    2005-10-01

    The objective of this project is to provide assistance in development of a standard test procedure for fan-filter units, which are gaining popularity for use in California cleanrooms. In particular, LBNL carried out collaboration with various stakeholders in the industry and took a lead in developing a draft standard method for testing the energy performance of fan-filter units, and provided assistance to California public utility companies by testing the draft method in PG&E's testing facility. Through testing more units in the future with a robust standard method, baseline performance information can be developed for use in possible energy incentive programs.

  7. Apodized RFI filtering of synthetic aperture radar images.

    SciTech Connect (OSTI)

    Doerry, Armin Walter

    2014-02-01

    Fine resolution Synthetic Aperture Radar (SAR) systems necessarily require wide bandwidths that often overlap spectrum utilized by other wireless services. These other emitters pose a source of Radio Frequency Interference (RFI) to the SAR echo signals that degrades SAR image quality. Filtering, or excising, the offending spectral contaminants will mitigate the interference, but at a cost of often degrading the SAR image in other ways, notably by raising offensive sidelobe levels. This report proposes borrowing an idea from nonlinear sidelobe apodization techniques to suppress interference without the attendant increase in sidelobe levels. The simple post-processing technique is termed Apodized RFI Filtering (ARF).

  8. Amplifier insensitive integrator design for active RC filter synthesis 

    E-Print Network [OSTI]

    Bailey, Glenn Roger

    1980-01-01

    the integrating capacitors by an appropriate resistor, Rf . Thus K can be represented as follows: K = Rf/R (74) Fig. 22 g1ves an example of this substitut1on into the integrator of Fig. 9 (p. 29). The correspond1ng ampl1f1er transfer funct1on 1s given... Figure Second-order, state-variable band-pass filter structure. Page 2. Operat1onal amplifier. 3. General filter us1ng at least one integrator. 4. General three-op amp RC active circuit. 5. First-order RC passive circuit. 6. Rea'l1zation of first...

  9. Zoned electrical heater arranged in spaced relationship from particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-11-15

    A system comprises a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  10. Low exhaust temperature electrically heated particulate matter filter system

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI); Bhatia, Garima (Bangalore, IN)

    2012-02-14

    A system includes a particulate matter (PM) filter, a sensor, a heating element, and a control module. The PM filter includes with an upstream end that receives exhaust gas, a downstream end and multiple zones. The sensor detects a temperature of the exhaust gas. The control module controls current to the heating element to convection heat one of the zones and initiate a regeneration process. The control module selectively increases current to the heating element relative to a reference regeneration current level when the temperature is less than a predetermined temperature.

  11. Method and apparatus for measuring flow velocity using matched filters

    DOE Patents [OSTI]

    Raptis, A.C.

    1983-09-06

    An apparatus and method for measuring the flow velocities of individual phase flow components of a multiphase flow utilizes matched filters. Signals arising from flow noise disturbance are extracted from the flow, at upstream and downstream locations. The signals are processed through pairs of matched filters which are matched to the flow disturbance frequency characteristics of the phase flow component to be measured. The processed signals are then cross-correlated to determine the transit delay time of the phase flow component between sensing positions. 8 figs.

  12. Wireless zoned particulate matter filter regeneration control system

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA

    2011-10-04

    An assembly includes a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and multiple zones. An absorbing layer absorbs microwave energy in one of N frequency ranges and is arranged with the upstream end. N is an integer. A frequency selective filter has M frequency selective segments and receives microwave energy in the N frequency ranges. M is an integer. One of the M frequency selective segments permits passage of the microwave energy in one of the N frequency ranges and does not permit passage of microwave energy in the other of the N frequency ranges.

  13. Method and apparatus for measuring flow velocity using matched filters

    DOE Patents [OSTI]

    Raptis, Apostolos C. (Downers Grove, IL)

    1983-01-01

    An apparatus and method for measuring the flow velocities of individual phase flow components of a multiphase flow utilizes matched filters. Signals arising from flow noise disturbance are extracted from the flow, at upstream and downstream locations. The signals are processed through pairs of matched filters which are matched to the flow disturbance frequency characteristics of the phase flow component to be measured. The processed signals are then cross-correlated to determine the transit delay time of the phase flow component between sensing positions.

  14. Direct analysis of air filter samples for alpha emitting isotopes

    SciTech Connect (OSTI)

    Mohagheghi, A.H.; Ghanbari, F.; Ebara, S.B.; Enghauser, M.E. [Sandia National Labs., Albuquerque, NM (United States); Bakhtiar, S.N. [Westinghouse WIPP, Carlsbad, NM (United States)

    1997-04-01

    The traditional method for determination of alpha emitting isotopes on air filters has been to process the samples by radiochemical methods. However, this method is too slow for cases of incidents involving radioactive materials where the determination of personnel received dose is urgent. A method is developed to directly analyze the air filters taken from personal and area air monitors. The site knowledge is used in combination with alpha spectral information to identify isotopes. A mathematical function is developed to estimate the activity for each isotope. The strengths and weaknesses of the method are discussed.

  15. The design and characterization of switched-resistor filters 

    E-Print Network [OSTI]

    Bass, James Traugott

    1983-01-01

    THE DESIGN AND CHARACTERIZATION OF SWITCHED-RESISTOR FILTERS A Thesis by JAMES TRAUGOTT BASS Submitted to t'ne Graduate College of Texas ARM University in partial fulf'llment of the requirement. for the degree of MASTER OF SCIENCE August... 1983 Major Subjec : Electrical Engineering THE DESIGN AND CHARACTERIZATION OF SWITCHED-RESISTOR FILTERS A THESIS BY JAMES TRAUGOTT BASS Approved as to style and content by: an a I . caper (Chairman of Committee) Nor. an C. GriswoI, d (Member...

  16. Electrically heated particulate filter regeneration using hydrocarbon adsorbents

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-02-01

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine. A grid of electrically resistive material selectively heats exhaust passing through the upstream end to initiate combustion of particulates within the PF. A hydrocarbon adsorbent coating applied to the PF releases hydrocarbons into the exhaust to increase a temperature of the combustion of the particulates within the PF.

  17. Fuel Injection Strategy for Soot-Filter Regeneration

    Broader source: Energy.gov [DOE]

    Fuel injection is optimized to allow both fast soot removal and temperatures below 700-800oC in case of drop-to-idle event. A 1-D mathematical model was used to simulate soot loading and temperature variations as a function of time and axial position in the filter during active regenerations and drop-to-idle events. The fact that the maximum temperature reached in a soot filter is a function of the soot loading when the drop-to-idle event occurs has been taken into account for developing this fuel injection strategy.

  18. ROTARY FILTER FINES TESTING FOR SMALL COLUMN ION EXCHANGE

    SciTech Connect (OSTI)

    Herman, D.

    2011-08-03

    SRNL was requested to quantify the amount of 'fines passage' through the 0.5 micron membranes currently used for the rotary microfilter (RMF). Testing was also completed to determine if there is any additional benefit to utilizing a 0.1 micron filter to reduce the amount of fines that could pass through the filter. Quantifying of the amount of fines that passed through the two sets of membranes that were tested was accomplished by analyzing the filtrate by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) for titanium. Even with preparations to isolate the titanium, all samples returned results of less than the instrument's detection limit of 0.184 mg/L. Test results show that the 0.5 micron filters produced a significantly higher flux while showing a negligible difference in filtrate clarity measured by turbidity. The first targeted deployment of the RMF is with the Small Column Ion Exchange (SCIX) at the Savannah River Site (SRS). SCIX uses crystalline silicotitanate (CST) to sorb cesium to decontaminate a clarified salt solution. The passage of fine particles through the filter membranes in sufficient quantities has the potential to impact the downstream facilities. To determine the amount of fines passage, a contract was established with SpinTek Filtration to operate a 3-disk pilot scale unit with prototypic filter disk and various feeds and two different filter disk membranes. SpinTek evaluated a set of the baseline 0.5 micron filter disks as well as a set of 0.1 micron filter disks to determine the amount of fine particles that would pass the membrane and to determine the flux each set produced. The membrane on both disk sets is manufactured by the Pall Corporation (PMM 050). Each set of disks was run with three feed combinations: prototypically ground CST, CST plus monosodium titanate (MST), and CST, MST, plus Sludge Batch 6 (SB6) simulant. Throughout the testing, samples of the filtrate were collected, measured for turbidity, and sent back to SRNL for analysis to quantify the amount of fines that passed through the membrane. It should be noted that even though ground CST was tested, it will be transferred to the Defense Waste Processing Facility (DWPF) feed tank and is not expected to require filtration.

  19. Montana Water Quality Permit Application, Nondegradation Authorization...

    Open Energy Info (EERE)

    Montana Water Quality Permit Application, Nondegradation Authorization, and Permit Fees Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory...

  20. Authorization basis for the 209-E Building

    SciTech Connect (OSTI)

    TIFFANY, M.S.

    1999-02-23

    This Authorization Basis document is one of three documents that constitute the Authorization Basis for the 209-E Building. Per the U.S. Department of Energy, Richland Operations Office (RL) letter 98-WSD-074, this document, the 209-E Building Preliminary Hazards Analysis (WHC-SD-WM-TI-789), and the 209-E Building Safety Evaluation Report (97-WSD-074) constitute the Authorization Basis for the 209-E Building. This Authorization Basis and the associated controls and safety programs will remain in place until safety documentation addressing deactivation of the 209-E Building is developed by the contractor and approved by RL.

  1. Oregon Underground Injection Control Program Authorized Injection...

    Open Energy Info (EERE)

    Systems Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Underground Injection Control Program Authorized Injection Systems Webpage...

  2. Coordination of Federal Authorizations for Electric Transmission...

    Broader source: Energy.gov (indexed) [DOE]

    rulemaking and opportunity for comment on the coordination of federal authorizations for electric transmission facilities, September 19, 2008 Coordination of Federal...

  3. Disposal Authorization Statement | Department of Energy

    Office of Environmental Management (EM)

    DAS requirements ensure the facility does not pose a threat to human health and the environment, defines the authorization for the design, construction, operation,...

  4. Stockroom Authorization Department of Chemistry & Biochemistry

    E-Print Network [OSTI]

    Morgan, Stephen L.

    Stockroom Authorization Department of Chemistry & Biochemistry University of South Carolina, GSRC supplies from the Dept. of Chemistry & Biochemistry Stockroom must bring with them this completed pre

  5. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Facility D Krauter P W Harrar J E Orloff S P Bahowick S M ENVIRONMENTAL SCIENCES POLLUTION CONTROL EQUIPMENT MAGNETIC FILTERS GROUND WATER WATER POLLUTION PERFORMANCE...

  6. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    neutron spin filter polarization helium We propose to extend the technique of polarized neutron scattering into new domains by continued development and application of polarized...

  7. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    spin filter; polarization; helium-3",,"We propose to extend the technique of polarized neutron scattering into new domains by continued development and application of polarized...

  8. Photonic crystal ring resonator based optical filters for photonic integrated circuits

    SciTech Connect (OSTI)

    Robinson, S., E-mail: mail2robinson@gmail.com [Department of Electronics and Communication Engineering, Mount Zion College of Engineering and Technology, Pudukkottai-622507, Tamil Nadu (India)

    2014-10-15

    In this paper, a two Dimensional (2D) Photonic Crystal Ring Resonator (PCRR) based optical Filters namely Add Drop Filter, Bandpass Filter, and Bandstop Filter are designed for Photonic Integrated Circuits (PICs). The normalized output response of the filters is obtained using 2D Finite Difference Time Domain (FDTD) method and the band diagram of periodic and non-periodic structure is attained by Plane Wave Expansion (PWE) method. The size of the device is minimized from a scale of few tens of millimeters to the order of micrometers. The overall size of the filters is around 11.4 ?m × 11.4 ?m which is highly suitable of photonic integrated circuits.

  9. Danish Energy Authority Poland -Electricity and gas

    E-Print Network [OSTI]

    Danish Energy Authority Poland - Electricity and gas market development study and practical guidelines for using EU Funds Electricity sector analyses December 2004 #12;Danish Energy Authority Poland - Electricity and gas market development study and practical guidelines for using EU Funds Electricity sector

  10. Financial Policy Manual 2107 ACCOUNTING AUTHORITY & RESPONSIBILITY

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2107 ACCOUNTING AUTHORITY & RESPONSIBILITY Effective: December 1986: Research Services PURPOSE To assign authority and responsibility for the accounting for sponsored projects must be separately accounted for per the terms of the award An advance account may be established prior

  11. Policy-Based Authorization William R. Cook

    E-Print Network [OSTI]

    Cook, William R.

    Page 1 Policy-Based Authorization William R. Cook Department of Computer Sciences University of Texas at Austin Abstract This paper discusses policy-based authorization, an effective intermediate point between MAC and DAC that promises to combine the best features of both models. Policy

  12. Using the Web for Name Authority Work

    E-Print Network [OSTI]

    Whittaker, Beth M.; Spillane, Jodi Lynn

    2001-01-01

    While many catalogers are using the Web to find the information they need to perform authority work quickly and accurately, the full potential of the Web to assist catalogers in name authority work has yet to be realized. The ever-growing nature...

  13. Survey of HEPA filter applications and experience at Department of Energy sites

    SciTech Connect (OSTI)

    Carbaugh, E.H.

    1981-11-01

    Results indicated that approximately 58% of the filters surveyed were changed out in the 1977 to 1979 study period and some 18% of all filters were changed out more than once. Most changeouts (60%) were due to the existence of a high pressure drop across the filter, indicative of filter plugging. The next most recurrent reasons for changeout and their percentage changeouts were leak test failure (15%) and preventive maintenance service life limit (12%). An average filter service life was calculated to be 3.0 years with a 2.0-year standard deviation. The labor required for filter changeout was calculated as 1.5 manhours per filter changed. Filter failures occurred with approximately 12% of all installed filters. Most failures (60%) occurred for unknown reasons and handling or installation damage accounted for an additional 20% of all failures. Media ruptures, filter frame failures and seal failures occurred with approximately equal frequency at 5 to 6% each. Subjective responses to the questionnaire indicate problems are: need for improved acid and moisture resistant filters; filters more readily disposable as radioactive waste; improved personnel training in filter handling and installation; and need for pretreatment of air prior to HEPA filtration.

  14. Detection with particle filtering in BLAST systems Yufei Huang

    E-Print Network [OSTI]

    Department of Electrical and Computer Engineering University of New Hampshire Durham, NH 03824 Email: jianqiu.zhang@unh.edu Petar M. Djuri´c Department of Electrical and Computer Engineering State University of New York at StonyDetection with particle filtering in BLAST systems Yufei Huang Department of Electrical Engineering

  15. Mercury Oxidation via Catalytic Barrier Filters Phase II

    SciTech Connect (OSTI)

    Wayne Seames; Michael Mann; Darrin Muggli; Jason Hrdlicka; Carol Horabik

    2007-09-30

    In 2004, the Department of Energy National Energy Technology Laboratory awarded the University of North Dakota a Phase II University Coal Research grant to explore the feasibility of using barrier filters coated with a catalyst to oxidize elemental mercury in coal combustion flue gas streams. Oxidized mercury is substantially easier to remove than elemental mercury. If successful, this technique has the potential to substantially reduce mercury control costs for those installations that already utilize baghouse barrier filters for particulate removal. Completed in 2004, Phase I of this project successfully met its objectives of screening and assessing the possible feasibility of using catalyst coated barrier filters for the oxidation of vapor phase elemental mercury in coal combustion generated flue gas streams. Completed in September 2007, Phase II of this project successfully met its three objectives. First, an effective coating method for a catalytic barrier filter was found. Second, the effects of a simulated flue gas on the catalysts in a bench-scale reactor were determined. Finally, the performance of the best catalyst was assessed using real flue gas generated by a 19 kW research combustor firing each of three separate coal types.

  16. A New Preprocessing Filter for Digital Mammograms Peyman Rahmati1

    E-Print Network [OSTI]

    Adler, Andy

    presents a computer-aided approach to enhancing suspicious lesions in digital mammograms. The developedA New Preprocessing Filter for Digital Mammograms Peyman Rahmati1 , Ghassan Hamarneh2 , Doron and increases survival rate [2]. Digital mammography uses x-rays to project structures in the 3D female breast

  17. Optical Filter Design: Gain Analysis and Tolerance Analysis 

    E-Print Network [OSTI]

    Vandrasi, Vivek

    2011-10-21

    that is designed to obtain a bandpass filter response of given specifications. It is also tested on similar designs for a comparative study between them. The parameters and the structure of the designs used for the analysis are presented in detail. The results...

  18. Multiferroic heterostructures for spin filter application - an ab initio study

    E-Print Network [OSTI]

    Borek, Stephan; Ebert, Hubert; Minár, Ján

    2015-01-01

    Novel imaging spin-filter techniques, which are based on low energy electron diffraction, are currently of high scientific interest. To improve the spin-detection efficiency a variety of new materials have been introduced in recent years. A new class of promising spin-filter materials are represented by multiferroic systems, as both magnetic and electric ordering exist in these materials. We have investigated Fe/BaTiO3(001), which defines a prominent candidate due to its moderate spontaneous polarization, for spin filter applications calculating diffraction patterns for spin polarized electrons incident on the Fe surface. Motivated by the fact that spin polarized low energy electron diffraction is a powerful method for the determination of the properties of surfaces we investigated the influence of switching the BaTiO3 polarization on the exchange and spin orbit scattering as well as on reflectivity and figure of merit. This system obviously offers the possibility to realize a multiferroic spin filter and man...

  19. A field programmable analog array for switched capacitor filters 

    E-Print Network [OSTI]

    Wilcox, Robert M.

    1994-01-01

    an architecture or floor plan for the layout of the FPAA. This involves the design of the active ceus (ie. programmable opamp), a programmable capacitor bank, the switches used in the SC filter synthesis, and the routing interconnections. A second objective...

  20. SOLUTION OF A GROUNDWATER CONTROL PROBLEM WITH IMPLICIT FILTERING \\Lambda

    E-Print Network [OSTI]

    to a control problem from hydrology. We seek to control the temperature at a group of drinking water wells to control the temperature in a set of drinking water wells. The site shown in Figure 2.1 is in the rechargeSOLUTION OF A GROUNDWATER CONTROL PROBLEM WITH IMPLICIT FILTERING \\Lambda A. BATTERMANN y , J. M