Sample records for file usage powder

  1. FILE USAGE RECOMMENDATIONS OCTOBER 31, 2013 | PAGE: 1 AVAILABLE LOGOS

    E-Print Network [OSTI]

    Aronov, Boris

    FILE USAGE RECOMMENDATIONS OCTOBER 31, 2013 | PAGE: 1 AVAILABLE LOGOS EPS JPG PNG LONG LOGO_long_white.png STACKED LOGO engineering_stacked_color.eps engineering_stacked_color.jpg engineering O R - Recommended File Type O - Optional File Type Which file to use Logo formats are available

  2. Hydrazine usage for corrosion control in PWR plants with powdered-resin-condensate polishers. Final report

    SciTech Connect (OSTI)

    Barkich, J.L.; Battaglia, P.J.

    1983-03-01T23:59:59.000Z

    The objective of this project was to obtain the data necessary to determine the optimum injection point and amount of hydrazine to be used for oxygen control in PWR units with condensate polishing demineralizers. An additional objective was to demonstrate that the condensate polisher can be used as a means to reduce the oxygen concentration in the condensate when a sufficient excess concentration of hydrazine (over the oxygen) concentration is carried over with the main steam into the condensers. Testing was performed at North Anna Unit 2 which employs powdered resin-type condensate polishing equipment. Testing was also scheduled to be performed at Ginna and Sequoyah Unit 1 plants; however, because of an unscheduled shutdown at Ginna and inability to control hydrazine dosage at Sequoyah, these tests were not performed.

  3. File:CDPHE Industrial Individual Wastewater Discharge Permit...

    Open Energy Info (EERE)

    Industrial Individual Wastewater Discharge Permit Application.pdf Jump to: navigation, search File File history File usage Metadata File:CDPHE Industrial Individual Wastewater...

  4. File:Texas NOI for Storm Water Discharges Associated with Construction...

    Open Energy Info (EERE)

    NOI for Storm Water Discharges Associated with Construction Activities (TXR150000).pdf Jump to: navigation, search File File history File usage Metadata File:Texas NOI for Storm...

  5. File:App Commercial Leases and Easements or Amendment or Residential...

    Open Energy Info (EERE)

    App Commercial Leases and Easements or Amendment or Residential Coastal Easements HOA.pdf Jump to: navigation, search File File history File usage Metadata File:App Commercial...

  6. Tungsten and tungsten alloy powder metallurgy: Powder production and applications excluding lamps. (Latest citations from the US Patent bibliographic file with exemplary claims). Published Search

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The bibliography contains citations of selected patents concerning the preparation of metallic and ceramic powders of tungsten and tungsten alloys, including applications of these materials. The hydrogen reduction of tungsten compounds together with alloying element compounds produce forms with characteristics of high density, hardness, wear resistance, high melting points, and abrasiveness. Topics include production of cathodes, heaters, filament wires, electrical contacts, acoustic absorbers, high-density sheets and coatings, hard penetrators, and tungsten carbide and metallized ceramics. (Contains a minimum of 109 citations and includes a subject term index and title list.)

  7. Usage by Job Size

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage by Job Size Table Usage by Job Size Table page loading animation Usage Query Interface System All Hopper Edison Carver Planck Matgen Franklin Hopper 1 Magellan Dirac Bassi...

  8. Parallel File Systems at HPC Centers: Usage,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomassPPPO WebsitePalms Village Resort B a g|sets 2014Parade

  9. Personality and Patterns of Facebook Usage Yoram Bachrach

    E-Print Network [OSTI]

    Rajamani, Sriram K.

    Personality and Patterns of Facebook Usage Yoram Bachrach Microsoft Research yobach.ac.uk ABSTRACT We show how users' activity on Facebook relates to their per- sonality, as measured by the standard Five Factor Model. Our dataset consists of the personality profiles and Facebook pro- file data

  10. A GeneralizationBased Approach to Clustering of Web Usage Sessions

    E-Print Network [OSTI]

    Fu, Yongjian

    A Generalization­Based Approach to Clustering of Web Usage Sessions Yongjian Fu, Kanwalpreet Sandhu,ksandhu,mingyig@umr.edu Abstract. The clustering of Web usage sessions based on the access patterns is studied. Access patterns of Web users are extracted from Web server log files, and then organized into sessions which represent

  11. Powder dispersion system

    DOE Patents [OSTI]

    Gorenz, Heather M. (Albuquerque, NM); Brockmann, John E. (Albuquerque, NM); Lucero, Daniel A. (Albuquerque, NM)

    2011-09-20T23:59:59.000Z

    A powder dispersion method and apparatus comprising an air eductor and a powder dispensing syringe inserted into a suction connection of the air eductor.

  12. Preparing titanium nitride powder

    DOE Patents [OSTI]

    Bamberger, Carlos E. (Oak Ridge, TN)

    1989-01-01T23:59:59.000Z

    A process for making titanium nitride powder by reaction of titanium phosphates with sodium cyanide.

  13. Preparation of titanium diboride powder

    DOE Patents [OSTI]

    Brynestad, Jorulf (Oak Ridge, TN); Bamberger, Carlos E. (Oak Ridge, TN)

    1985-01-01T23:59:59.000Z

    Finely-divided titanium diboride or zirconium diboride powders are formed by reacting gaseous boron trichloride with a material selected from the group consisting of titanium powder, zirconium powder, titanium dichloride powder, titanium trichloride powder, and gaseous titanium trichloride.

  14. Usage Demographics 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence mayUndergraduateAbout Us Updatesproject0 NERSC Usage

  15. Usage Demographics 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence mayUndergraduateAbout Us Updatesproject0 NERSC Usage1

  16. Usage Demographics 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence mayUndergraduateAbout Us Updatesproject0 NERSC Usage12

  17. Precision powder feeder

    DOE Patents [OSTI]

    Schlienger, M. Eric (Albuquerque, NM); Schmale, David T. (Albuquerque, NM); Oliver, Michael S. (Sandia Park, NM)

    2001-07-10T23:59:59.000Z

    A new class of precision powder feeders is disclosed. These feeders provide a precision flow of a wide range of powdered materials, while remaining robust against jamming or damage. These feeders can be precisely controlled by feedback mechanisms.

  18. Quality experimental and calculated powder x-ray diffraction

    SciTech Connect (OSTI)

    Sullenger, D.B.; Cantrell, J.S.; Beiter, T.A.; Tomlin, D.W.

    1996-08-01T23:59:59.000Z

    For several years, we have submitted quality powder XRD patterns to the International Centre for Diffraction Data for inclusion as reference standards in their Powder Diffraction File. The procedure followed is described; examples used are {beta}-UH{sub 3}, {alpha}- BaT{sub 2}, alpha-lithium disilicate ({alpha}-Li{sub 2}Si{sub 2}O{sub 5}), and 2,2`,4,4`,6,6`hexanitroazobenzene-III (HNAB-III).

  19. Aluminum powder metallurgy processing

    SciTech Connect (OSTI)

    Flumerfelt, J.F.

    1999-02-12T23:59:59.000Z

    The objective of this dissertation is to explore the hypothesis that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder. The hypothesis was tested with pure aluminum powders produced by commercial air atomization, commercial inert gas atomization, and gas atomization reaction synthesis (GARS). A comparison of the GARS aluminum powders with the commercial aluminum powders showed the former to exhibit superior powder characteristics. The powders were compared in terms of size and shape, bulk chemistry, surface oxide chemistry and structure, and oxide film thickness. Minimum explosive concentration measurements assessed the dependence of explosibility hazard on surface area, oxide film thickness, and gas atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization oxidation of aluminum powder. An Al-Ti-Y GARS alloy exposed in ambient air at different temperatures revealed the effect of reactive alloy elements on post-atomization powder oxidation. The pure aluminum powders were consolidated by two different routes, a conventional consolidation process for fabricating aerospace components with aluminum powder and a proposed alternative. The consolidation procedures were compared by evaluating the consolidated microstructures and the corresponding mechanical properties. A low temperature solid state sintering experiment demonstrated that tap densified GARS aluminum powders can form sintering necks between contacting powder particles, unlike the total resistance to sintering of commercial air atomization aluminum powder.

  20. HYDROGEN USAGE AND STORAGE

    E-Print Network [OSTI]

    It is thought that it will be useful to inform society and people who are interested in hydrogen energy. The study below has been prepared due to this aim can be accepted as an article to exchange of information between people working on this subject. This study has been presented to reader to be utilized as a “technical note”. Main Energy sources coal, petroleum and natural gas are the fossil fuels we use today. They are going to be exhausted since careless usage in last decades through out the world, and human being is going to face the lack of energy sources in the near future. On the other hand as the fossil fuels pollute the environment makes the hydrogen important for an alternative energy source against to the fossil fuels. Due to the slow progress in hydrogen’s production, storage and converting into electrical energy experience, extensive usage of Hydrogen can not find chance for applications in wide technological practices. Hydrogen storage stands on an important point in the development of Hydrogen energy Technologies. Hydrogen is volumetrically low energy concentration fuel. Hydrogen energy, to meet the energy quantity necessary for the nowadays technologies and to be accepted economically and physically against fossil fuels, Hydrogen storage technologies have to be developed in this manner. Today the most common method in hydrogen storage may be accepted as the high pressurized composite tanks. Hydrogen is stored as liquid or gaseous phases. Liquid hydrogen phase can be stored by using composite tanks under very high pressure conditions. High technology composite material products which are durable to high pressures, which should not be affected by hydrogen embrittlement and chemical conditions.[1

  1. Euclid File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File storage File storage Disk Quota Change Request Form Euclid File Systems Euclid has 3 kinds of file systems available to users: home directories, scratch directories and...

  2. Multiple feed powder splitter

    DOE Patents [OSTI]

    Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

    2002-01-01T23:59:59.000Z

    A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

  3. Multiple feed powder splitter

    DOE Patents [OSTI]

    Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

    2001-01-01T23:59:59.000Z

    A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

  4. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-05T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of ternary mixtures consisting of: Ni powder, Cu powder, and Al powder, Ni powder, Cr powder, and Al powder; Ni powder, W powder and Al powder; Ni powder, V powder, and Al powder; Ni powder, Mo powder, and Al powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  5. ADAPTIVE WEB SITES BY WEB USAGE MINING Yongjian Fu Mario Creado MingYi Shih

    E-Print Network [OSTI]

    Fu, Yongjian

    ADAPTIVE WEB SITES BY WEB USAGE MINING Yongjian Fu Mario Creado Ming­Yi Shih Department of Computer An approach for reorganizing a Web site based on user access patterns is proposed. The Web server's log files and the Web pages on the site are first preprocessed to obtain the access statistics of the Web pages

  6. 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources

    SciTech Connect (OSTI)

    Sturgeon, Richard W. [Los Alamos National Laboratory

    2012-06-27T23:59:59.000Z

    This report provides the results of the 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources (RMUS), which was updated by the Environmental Protection (ENV) Division's Environmental Stewardship (ES) at Los Alamos National Laboratory (LANL). ES classifies LANL emission sources into one of four Tiers, based on the potential effective dose equivalent (PEDE) calculated for each point source. Detailed descriptions of these tiers are provided in Section 3. The usage survey is conducted annually; in odd-numbered years the survey addresses all monitored and unmonitored point sources and in even-numbered years it addresses all Tier III and various selected other sources. This graded approach was designed to ensure that the appropriate emphasis is placed on point sources that have higher potential emissions to the environment. For calendar year (CY) 2011, ES has divided the usage survey into two distinct reports, one covering the monitored point sources (to be completed later this year) and this report covering all unmonitored point sources. This usage survey includes the following release points: (1) all unmonitored sources identified in the 2010 usage survey, (2) any new release points identified through the new project review (NPR) process, and (3) other release points as designated by the Rad-NESHAP Team Leader. Data for all unmonitored point sources at LANL is stored in the survey files at ES. LANL uses this survey data to help demonstrate compliance with Clean Air Act radioactive air emissions regulations (40 CFR 61, Subpart H). The remainder of this introduction provides a brief description of the information contained in each section. Section 2 of this report describes the methods that were employed for gathering usage survey data and for calculating usage, emissions, and dose for these point sources. It also references the appropriate ES procedures for further information. Section 3 describes the RMUS and explains how the survey results are organized. The RMUS Interview Form with the attached RMUS Process Form(s) provides the radioactive materials survey data by technical area (TA) and building number. The survey data for each release point includes information such as: exhaust stack identification number, room number, radioactive material source type (i.e., potential source or future potential source of air emissions), radionuclide, usage (in curies) and usage basis, physical state (gas, liquid, particulate, solid, or custom), release fraction (from Appendix D to 40 CFR 61, Subpart H), and process descriptions. In addition, the interview form also calculates emissions (in curies), lists mrem/Ci factors, calculates PEDEs, and states the location of the critical receptor for that release point. [The critical receptor is the maximum exposed off-site member of the public, specific to each individual facility.] Each of these data fields is described in this section. The Tier classification of release points, which was first introduced with the 1999 usage survey, is also described in detail in this section. Section 4 includes a brief discussion of the dose estimate methodology, and includes a discussion of several release points of particular interest in the CY 2011 usage survey report. It also includes a table of the calculated PEDEs for each release point at its critical receptor. Section 5 describes ES's approach to Quality Assurance (QA) for the usage survey. Satisfactory completion of the survey requires that team members responsible for Rad-NESHAP (National Emissions Standard for Hazardous Air Pollutants) compliance accurately collect and process several types of information, including radioactive materials usage data, process information, and supporting information. They must also perform and document the QA reviews outlined in Section 5.2.6 (Process Verification and Peer Review) of ES-RN, 'Quality Assurance Project Plan for the Rad-NESHAP Compliance Project' to verify that all information is complete and correct.

  7. File:03ORCEncroachment.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealandORCEncroachment.pdf Jump to: navigation, search File File history File usage File:03ORCEncroachment.pdf

  8. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-19T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  9. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-05-10T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  10. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  11. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-07-29T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  12. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-28T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  13. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-01-25T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  14. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goval, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-06-07T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  15. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-14T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  16. Remote File Access 2010

    E-Print Network [OSTI]

    University of Technology, Sydney

    Remote File Access 2010 Mac Users Guide #12;Remote File Access: MAC Users Guide 2010 2 Table Remote File Access 11 Part IV: Using Remote File Access 15 Part V: FAQ 24 #12;Remote File Access: MAC Users Guide 2010 3 1. What is Remote File Access? UTS Remote File Access service is provided to enable

  17. File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget »Travel andFifth Annual RadWasteFileFileFile

  18. NERSC File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systems NERSC File Systems Overview NERSC file systems can be divided into two categories: local and global. Local file systems are only accessible on a single platform, providing...

  19. Franklin File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Files systems Files systems NERSC's global home and project file systems are available on Franklin. Additionally, Franklin has over 400 TB of locally attached high-performance...

  20. Ultrafine hydrogen storage powders

    DOE Patents [OSTI]

    Anderson, Iver E. (Ames, IA); Ellis, Timothy W. (Doylestown, PA); Pecharsky, Vitalij K. (Ames, IA); Ting, Jason (Ames, IA); Terpstra, Robert (Ames, IA); Bowman, Robert C. (La Mesa, CA); Witham, Charles K. (Pasadena, CA); Fultz, Brent T. (Pasadena, CA); Bugga, Ratnakumar V. (Arcadia, CA)

    2000-06-13T23:59:59.000Z

    A method of making hydrogen storage powder resistant to fracture in service involves forming a melt having the appropriate composition for the hydrogen storage material, such, for example, LaNi.sub.5 and other AB.sub.5 type materials and AB.sub.5+x materials, where x is from about -2.5 to about +2.5, including x=0, and the melt is gas atomized under conditions of melt temperature and atomizing gas pressure to form generally spherical powder particles. The hydrogen storage powder exhibits improved chemcial homogeneity as a result of rapid solidfication from the melt and small particle size that is more resistant to microcracking during hydrogen absorption/desorption cycling. A hydrogen storage component, such as an electrode for a battery or electrochemical fuel cell, made from the gas atomized hydrogen storage material is resistant to hydrogen degradation upon hydrogen absorption/desorption that occurs for example, during charging/discharging of a battery. Such hydrogen storage components can be made by consolidating and optionally sintering the gas atomized hydrogen storage powder or alternately by shaping the gas atomized powder and a suitable binder to a desired configuration in a mold or die.

  1. Iowa Powder Atomization Technologies

    ScienceCinema (OSTI)

    None

    2013-03-01T23:59:59.000Z

    The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

  2. Iowa Powder Atomization Technologies

    SciTech Connect (OSTI)

    None

    2012-01-01T23:59:59.000Z

    The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

  3. Reducing the Energy Usage of Oce Applications

    E-Print Network [OSTI]

    Flinn, Jason

    Reducing the Energy Usage of OÆce Applications Jason Flinn 1 , Eyal de Lara 2 , M. Satyanarayanan 1 of the energy usage of Microsoft's PowerPoint application and show that adaptive policies can reduce energy research e#11;ort, no silver bullet for reducing energy usage has yet been found. Instead, a comprehensive

  4. Method for synthesizing powder materials

    SciTech Connect (OSTI)

    Buss, R.J.; Ho, P.

    1988-01-21T23:59:59.000Z

    A method for synthesizing ultrafine powder materials, for example, ceramic and metal powders, comprises admitting gaseous reactants from which the powder material is to be formed into a vacuum reaction chamber maintained at a pressure less than atmospheric and at a temperature less than about 400/degree/K (127/degree/C). The gaseous reactants are directed through a glow discharge provided in the vacuum reaction chamber to form the ultrafine powder material. 1 fig.

  5. File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget »Travel andFifth Annual RadWasteFileFile

  6. usage_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocksa. Appliances by Climate Zone,8,1996and8.1 64.1 4.2 1.8Usage

  7. File:01WAALandUsePlanning.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual1WAALandUsePlanning.pdf Jump to: navigation, search File File history File usage

  8. File:06UTATransportation.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealandORCEncroachment.pdf JumpUTATransportation.pdf Jump to: navigation, search File File history File usage

  9. Preparation of superconductor precursor powders

    DOE Patents [OSTI]

    Bhattacharya, Raghunath (Littleton, CO)

    1998-01-01T23:59:59.000Z

    A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

  10. Section 6 -Facilities Usage and Maintenance A. Facilities Usage and Maintenance

    E-Print Network [OSTI]

    Pantaleone, Jim

    Section 6 - Facilities Usage and Maintenance A. Facilities Usage and Maintenance 1 be held financially responsible. Financial responsibility extends to abandoned belongings, excessive is not permitted under any circumstances. Storage facilities are provided in most student housing units for storing

  11. Data & File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Management Policies NERSC File Systems HPSS Data Archive IO Resources for Scientific Applications at NERSC Optimizing IO performance on the Lustre file system IO Formats...

  12. Computer Science MAPO: Mining API Usages from

    E-Print Network [OSTI]

    Xie, Tao

    Computer Science MAPO: Mining API Usages from Open Source Repositories Tao Xie Department of Computer Science North Carolina State University, USA Jian Pei Department of Computer Science Simon Fraser University, Canada ·http://ase.csc.ncsu.edu/ #12;Computer Science Learning API Usages is Challenging ·org

  13. FERC Filing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederal Columbia River RiskFatigueFERC-Filing Sign

  14. FERC Filing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederal Columbia River RiskFatigueFERC-Filing

  15. TO: FILE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj: ;;I : T' j-jE:, ,, TO: FILE

  16. TO: FILE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj: ;;I : T' j-jE:, ,, TO: FILE3

  17. File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget »Travel andFifth Annual RadWasteFile Systems

  18. File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget »Travel andFifth Annual RadWasteFile

  19. Preparation of superconductor precursor powders

    DOE Patents [OSTI]

    Bhattacharya, R.

    1998-08-04T23:59:59.000Z

    A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products. 7 figs.

  20. Preparation of superconductor precursor powders

    DOE Patents [OSTI]

    Bhattacharya, Raghunath (Littleton, CO); Blaugher, Richard D. (Evergreen, CO)

    1995-01-01T23:59:59.000Z

    A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals, such as nitrate salts of thallium, barium, calcium, and copper, which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of thallium in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

  1. Recent Trends in Car Usage in Advanced Economies - Slower Growth...

    Open Energy Info (EERE)

    Trends in Car Usage in Advanced Economies - Slower Growth Ahead? Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Recent Trends in Car Usage in Advanced Economies -...

  2. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

    1996-01-02T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

  3. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

    1996-01-01T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  4. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

    1994-01-01T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  5. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

    1995-01-01T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  6. Method for molding ceramic powders

    DOE Patents [OSTI]

    Janney, M.A.

    1990-01-16T23:59:59.000Z

    A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, where after the product may be sintered.

  7. Method for molding ceramic powders

    DOE Patents [OSTI]

    Janney, Mark A. (Knoxville, TN)

    1990-01-01T23:59:59.000Z

    A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, whereafter the product may be sintered.

  8. Style and Usage Guidelines for Written Communications

    E-Print Network [OSTI]

    Rose, Michael R.

    Style and Usage Guidelines for Written Communications Administrative and Business Services #12 Construction Commas Capitalization and the "Uniqueness Rule" Selected Style Guidelines Apostrophes Colons Fonts of Comparative Statements Indented Bullets Communicating Using Numbers ZotMail Messages #12;- 1 - Introduction

  9. Material impacts on operational energy usage

    E-Print Network [OSTI]

    Love, Andrea, S.M. Massachusetts Institute of Technology

    2011-01-01T23:59:59.000Z

    Decisions regarding materials and construction of a building are made all the time in the architectural process, but thought is not always given to how those choices may affect the buildings ultimate energy usage and the ...

  10. Neutron detectors comprising boron powder

    DOE Patents [OSTI]

    Wang, Zhehui; Morris, Christopher; Bacon, Jeffrey Darnell; Makela, Mark F; Spaulding, Randy Jay

    2013-05-21T23:59:59.000Z

    High-efficiency neutron detector substrate assemblies comprising a first conductive substrate, wherein a first side of the substrate is in direct contact with a first layer of a powder material comprising .sup.10boron, .sup.10boron carbide or combinations thereof, and wherein a conductive material is in proximity to the first layer of powder material; and processes of making said neutron detector substrate assemblies.

  11. INSPIRE and SPIRES Log File Analysis

    SciTech Connect (OSTI)

    Adams, Cole; /Wheaton Coll. /SLAC

    2012-08-31T23:59:59.000Z

    SPIRES, an aging high-energy physics publication data base, is in the process of being replaced by INSPIRE. In order to ease the transition from SPIRES to INSPIRE it is important to understand user behavior and the drivers for adoption. The goal of this project was to address some questions in regards to the presumed two-thirds of the users still using SPIRES. These questions are answered through analysis of the log files from both websites. A series of scripts were developed to collect and interpret the data contained in the log files. The common search patterns and usage comparisons are made between INSPIRE and SPIRES, and a method for detecting user frustration is presented. The analysis reveals a more even split than originally thought as well as the expected trend of user transition to INSPIRE.

  12. Powder collection apparatus/method

    DOE Patents [OSTI]

    Anderson, I.E.; Terpstra, R.L.; Moore, J.A.

    1994-01-11T23:59:59.000Z

    Device for separating and collecting ultrafine atomized powder from the gas stream of a gas atomizing apparatus comprises a housing having an interior wall oriented at an angle relative to horizontal so as to form a downwardly converging, conical expansion chamber, an inlet conduit communicated to the expansion chamber proximate an upper region thereof for receiving the gas stream, and an outlet proximate a lower region of the expansion chamber. The inlet conduit is oriented at a compound inclined angle (with respect to horizontal) selected to promote separation and collection of powder from the gas stream in the expansion chamber. The compound angle comprises a first entrance angle that is greater than the angle of repose of the powder on the housing interior wall such that any powder accumulation in the inlet conduit tends to flow down the wall toward the outlet. The second angle is selected generally equal to the angle of the housing interior wall measured from the same horizontal plane so as to direct the gas stream into the expansion chamber generally tangent to the housing interior wall to establish a downward swirling gas stream flow in the expansion chamber. A powder collection container is communicated to the outlet of the expansion chamber to collect the powder for further processing. 4 figures.

  13. Numerical Methods & .m Files

    E-Print Network [OSTI]

    1910-70-10T23:59:59.000Z

    Save this file as a .m file with the SAME name as your function. The above example would be saved as “fcn1.m”. You can check if your function has been saved ...

  14. Water Usage Law, Major Water Users (Missouri)

    Broader source: Energy.gov [DOE]

    Any water user with the capability to withdraw or divert 100,000 gallons or more per day from any stream, river, lake, well, spring or other water source must register and file for a permit for...

  15. Standard interface file handbook

    SciTech Connect (OSTI)

    Shapiro, A.; Huria, H.C. (Cincinnati Univ., OH (United States))

    1992-10-01T23:59:59.000Z

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  16. Remote File PC Users Guide

    E-Print Network [OSTI]

    University of Technology, Sydney

    UTS: ITD Remote File Access 2010 PC Users Guide V3.0 #12;UTS:ITD Remote File Access: PC Users Guide Part III: Accessing Remote File Access 8 Part IV: Using Remote File Access 14 Part V: FAQ 25 #12;UTS:ITD Remote File Access: PC Users Guide v3.0 2010 3 1. What is Remote File Access? UTS Remote File Access

  17. USAGE-BASED PRICING DIFFERENTIATION FOR

    E-Print Network [OSTI]

    Huang, Jianwei

    cost, complex pricing schemes are not "customer- friendly" and discourage customers from usingCHAPTER 1 USAGE-BASED PRICING DIFFERENTIATION FOR COMMUNICATION NETWORKS: INCOMPLETE INFORMATION AND LIMITED PRICING CHOICES Shuqin Li, Ph.D.1 and Jianwei Huang, Ph.D.2 1 Research and Innovation, Alcatel

  18. VEHICLE USAGE AGREEMENT DEPARTMENT OF BIOLOGICAL SCIENCE

    E-Print Network [OSTI]

    Ronquist, Fredrik

    VEHICLE USAGE AGREEMENT DEPARTMENT OF BIOLOGICAL SCIENCE All drivers of vehicles must certify to the following: 1. I certify that I have a valid driver's license appropriate for the vehicle type and will abide belts. 2. I have read and understand the vehicle operating policies and procedures as defined

  19. Balanced Codon Usage Optimizes Eukaryotic Translational Efficiency

    E-Print Network [OSTI]

    Zhang, Jianzhi

    Balanced Codon Usage Optimizes Eukaryotic Translational Efficiency Wenfeng Qian1 , Jian-Rong Yang1, Guangzhou, China Abstract Cellular efficiency in protein translation is an important fitness determinant and that translational efficiency is maximized by the exclusive use of rapidly translated codons. Here we estimate

  20. University Town Management Office Town Green Usage

    E-Print Network [OSTI]

    Chaudhuri, Sanjay

    University Town Management Office Town Green Usage Background The UTown Management Office (UTMO the sustainability of the Green as the Office of Estate & Development (OED) has highlighted that the landscape consultant has advised that it would require about one year period for the soil to settle to its final level

  1. Report on Activities And Usage Statistics of

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    of the Mobile Learning Portal, at mobilelearningportal.org. This Web site is a #12;Learning Technology CenterReport on Activities And Usage Statistics of Learning Technology Center Services and Facilities 2009-2010 #12;Learning Technology Center Review 2009-2010 December 2010 2 Report on Activities

  2. File:03ORDCompetitiveGeothermalLease (1).pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealandORCEncroachment.pdf Jump to: navigation, search File File history File usage

  3. File:08COaBulkTransmissionSitingProcess.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to: navigation, search File File history File usage Metadata

  4. File:08FDAFERCOrderNo2003Process.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to: navigation, search File File history File usage

  5. File:NREL-ar-80m.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdf Jump to: navigation, search File File history File usage

  6. Polymer quenched prealloyed metal powder

    DOE Patents [OSTI]

    Hajaligol, Mohammad R. (Midlothian, VA); Fleischhauer, Grier (Midlothian, VA); German, Randall M. (State College, PA)

    2001-01-01T23:59:59.000Z

    A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3 % Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.

  7. Intradermal needle-free powdered drug injection

    E-Print Network [OSTI]

    Liu, John (John Hsiao-Yung)

    2012-01-01T23:59:59.000Z

    This thesis presents a new method for needle-free powdered drug injection. The design, construction, and testing of a bench-top helium-powered device capable of delivering powder to controllable depths within the dermis ...

  8. Method for synthesizing ultrafine powder materials

    DOE Patents [OSTI]

    Buss, Richard J. (Albuquerque, NM); Ho, Pauline (Albuquerque, NM)

    1988-01-01T23:59:59.000Z

    A method for synthesizing ultrafine powder materials, for example, ceramic and metal powders, comprises admitting gaseous reactants from which the powder material is to be formed into a vacuum reaction chamber maintained at a pressure less than atmospheric and at a temperature less than about 400.degree. K. (127.degree.C.). The gaseous reactants are directed through a glow discharge provided in the vacuum reaction chamber to form the ultrafine powder material.

  9. Monitoring the usage of a computer system

    SciTech Connect (OSTI)

    Bailey, D.J.

    1987-11-01T23:59:59.000Z

    Controlling the usage of computer systems particularly those operated for the federal government, is an important topic today. Audit requirements have grown to the point where they can be a significant burden to the proprietors of the system. The paper briefly mentions several proposals for responding to increased audit requirements and for monitoring a system to detect unauthorized activity. A technique is proposed for situations where the proscribed or the intended activity can be characterized in terms of program or system performance parameters. The design of a usage monitoring system is outlined. The design is based on enhancing the audit data provided by the monitored system, capturing the audit data in a separate system to protect it from user access, and implementing one of the audit trail analysis systems currently under development.

  10. UNIX file permissions

    E-Print Network [OSTI]

    ... out sensitive information (like promotion documents and qualifier exams). ... about security, you will want to change your "umask" line in your .cshrc file.

  11. Reducing Energy Usage in Extractive Distillation

    E-Print Network [OSTI]

    Saxena, A. C.; Bhandari, V. A.

    , .. ~ REDUCING ENERGY USAGE IN,EXTRACTIVE DISTILLATION A. C. Saxena V. A. Bhandari Polysar Limited Sarnia, Ontario, Canada Abstract Butadiene 1:3 is separated from other C. hydrocarbons by extractive distillation in a sieve plate tower.... To improve the energy efficiency, butadiene recovery and productivity of the extractive distillation process, many process changes have been made. Their rationale, the methodology used to implement the various changes, and how they affected the process...

  12. Predicting energy usage in a supermarket

    E-Print Network [OSTI]

    Schrock, Derek Wayne

    1989-01-01T23:59:59.000Z

    PREDICTING ENERGY USAGE IN A SUPERMARKET A Thesis by DEREK WAYNE SCHROCK Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1989 Major...), which consuine 24. 8% of the energy used by all commercial buildings [1]. This thesis reports on work intended to identify conservation opportunities in the mercantile services category by focusing on operational and maintenance problems. A major...

  13. Cognitive Structures Underlying Gendered Language Usage in Germany: Narration and Linguistic Fieldwork

    E-Print Network [OSTI]

    Kolar, Meredith

    2011-01-01T23:59:59.000Z

    Gendered Language Usage in Germany: Narration and LinguisticGendered Language Usage in Germany: Narration and LinguisticGendered Language Usage in Germany: Narration and Linguistic

  14. Similarity measure to identify users' profiles in web usage mining

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Similarity measure to identify users' profiles in web usage mining Firas Abou Latif -- Nicolas information. It makes the website browsing process even harder. This paper addresses the web usage mining problématique ré- currente. Le Web Usage Mining, qui tente de résoudre ce problème, propose des techniques

  15. MESOSCALE SIMULATIONS OF POWDER COMPACTION

    SciTech Connect (OSTI)

    Lomov, Ilya; Fujino, Don; Antoun, Tarabay; Liu, Benjamin [Lawrence Livermore National Laboratory, P. O. Box 808, Livermore CA 94551 (United States)

    2009-12-28T23:59:59.000Z

    Mesoscale 3D simulations of shock compaction of metal and ceramic powders have been performed with an Eulerian hydrocode GEODYN. The approach was validated by simulating a well-characterized shock compaction experiment of a porous ductile metal. Simulation results using the Steinberg material model and handbook values for solid 2024 aluminum showed good agreement with experimental compaction curves and wave profiles. Brittle ceramic materials are not as well studied as metals, so a simple material model for solid ceramic (tungsten carbide) has been calibrated to match experimental compaction curves. Direct simulations of gas gun experiments with ceramic powders have been performed and showed good agreement with experimental data. The numerical shock wave profile has same character and thickness as that measured experimentally using VISAR. The numerical results show reshock states above the single-shock Hugoniot line as observed in experiments. We found that for good quantitative agreement with experiments 3D simulations are essential.

  16. ELCAP Data Assembly and Conversion Project: Report on File Contents

    E-Print Network [OSTI]

    ................................................................................................................7 PNNL Data Files.........................................................................................................................................9 PNNL Site Files.SASLIB.XPT.....................................................................................................................................14 PNNL AVAX Files

  17. Register file soft error recovery

    DOE Patents [OSTI]

    Fleischer, Bruce M.; Fox, Thomas W.; Wait, Charles D.; Muff, Adam J.; Watson, III, Alfred T.

    2013-10-15T23:59:59.000Z

    Register file soft error recovery including a system that includes a first register file and a second register file that mirrors the first register file. The system also includes an arithmetic pipeline for receiving data read from the first register file, and error detection circuitry to detect whether the data read from the first register file includes corrupted data. The system further includes error recovery circuitry to insert an error recovery instruction into the arithmetic pipeline in response to detecting the corrupted data. The inserted error recovery instruction replaces the corrupted data in the first register file with a copy of the data from the second register file.

  18. Optimization of the Energy Usage at CERN

    E-Print Network [OSTI]

    Burckhart, H J; Caspers, F; Doré, V; Gatignon, L; Martel, C; Nonis, M; Tommasini, D

    2013-01-01T23:59:59.000Z

    Some of the efforts of CERN to optimize its energy usage are presented. Work is proceeding in several areas: campus and infrastructure, accelerators and beam lines, as well as R&D for future accelerators. The existing building stock is being renovated and new buildings apply an integrated energy concept. The energy efficiency of the accelerators and beam lines can be further enhanced by powering more equipment dynamically only during the time it is really needed. For designing new accelerators novel approaches are being investigated to re-use energy which in today’s installations gets dumped thermally.

  19. An assessment of worldwide supercomputer usage

    SciTech Connect (OSTI)

    Wasserman, H.J.; Simmons, M.L.; Hayes, A.H.

    1995-01-01T23:59:59.000Z

    This report provides a comparative study of advanced supercomputing usage in Japan and the United States as of Spring 1994. It is based on the findings of a group of US scientists whose careers have centered on programming, evaluating, and designing high-performance supercomputers for over ten years. The report is a follow-on to an assessment of supercomputing technology in Europe and Japan that was published in 1993. Whereas the previous study focused on supercomputer manufacturing capabilities, the primary focus of the current work was to compare where and how supercomputers are used. Research for this report was conducted through both literature studies and field research in Japan.

  20. How Usage is Charged at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm) HarmonicbetandEnergy 2010 ABringof Energyusage is

  1. Process for the synthesis of iron powder

    DOE Patents [OSTI]

    Not Available

    1982-03-06T23:59:59.000Z

    A process for preparing iron powder suitable for use in preparing the iron-potassium perchlorate heat-powder fuel mixture used in thermal batteries, comprises preparing a homogeneous, dense iron oxide hydroxide precipitate by homogeneous precipitation from an aqueous mixture of a ferric salt, formic or sulfuric acid, ammonium hydroxide and urea as precipitating agent; and then reducing the dense iron oxide hydroxide by treatment with hydrogen to prepare the iron powder.

  2. Process for the synthesis of iron powder

    DOE Patents [OSTI]

    Welbon, W.W.

    1983-11-08T23:59:59.000Z

    A process for preparing iron powder suitable for use in preparing the iron-potassium perchlorate heat-powder fuel mixture used in thermal batteries, comprises preparing a homogeneous, dense iron oxide hydroxide precipitate by homogeneous precipitation from an aqueous mixture of a ferric salt, formic or sulfuric acid, ammonium hydroxide and urea as precipitating agent; and then reducing the dense iron oxide hydroxide by treatment with hydrogen to prepare the iron powder. 2 figs.

  3. Method for synthesizing ultrafine powder materials

    SciTech Connect (OSTI)

    Buss, R.J.; Ho, P.

    1988-09-06T23:59:59.000Z

    This patent describes a method for synthesizing ultrafine powder material from gaseous reactants, comprising (a) admitting gaseous reactants from which the powder material is formed into a vacuum reaction chamber maintained at a pressure less than atmospheric and at a temperature less than about 400/sup 0/K, and directing the gaseous reactants through a glow discharge provided in the vacuum reaction chamber to form the ultrafine powder material.

  4. Gene expression level influences amino acid usage, but not codon usage, in the tsetse fly

    E-Print Network [OSTI]

    Herbeck, Joshua

    and configuration of amino acid differences between Wigglesworthia and Escherichia coli were compared to test and Evolution, Marine Biological Laboratory, 7 MBL Street, Woods Hole, MA 02543, USA 2 Department of Biological to distinct patterns of genome evolu- tion. Synonymous codon usage in the free-living bacteria Escherichia

  5. Low-Cost Titanium Powder for Feedstock

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Titanium Powder for Feedstock Principal Investigator: Curt Lavender Presenter: Mark T. Smith Pacific Northwest National Laboratory OVT 2008 DOE Peer Review February 28, 2008 This...

  6. BPA files reciprocity tariff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 12 BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE Friday, March 30, 2012 CONTACT: Doug Johnson, 503-230-5840 or 503-230-5131 BPA files reciprocity tariff Portland, Ore. -...

  7. adjunctive antimetabolite usage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Libraries (CUL). While Rosen, Jay 397 Mining Usage Data and Development Artifacts Olga Baysal, Reid Holmes, and Michael W. Godfrey Computer Technologies and Information...

  8. anthelmintic usage perspectives: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Libraries (CUL). While Rosen, Jay 380 Mining Usage Data and Development Artifacts Olga Baysal, Reid Holmes, and Michael W. Godfrey Computer Technologies and Information...

  9. Energy usage in oil and gas extraction

    SciTech Connect (OSTI)

    Honeycutt, B.D.

    1991-05-01T23:59:59.000Z

    This report was prepared in partial fulfillment of Subcontract No. C90-103207 by Baxter D. Honeycutt, P.E., Richardson Texas, for the Idaho National Engineering Laboratory (INEL) and the US DOE, INEL requirements, for the requested report were outlined by letter dated September 4, 1990, included the following: process flow diagrams and descriptive discussions of technical operations; mass and energy balances; a summary of energy-saving opportunities with the cross-cutting technologies emphasized; trends of oil and gas production versus energy expended to achieve new production; conclusions and recommendations for future research. The National Energy Account (NEA) data on energy usage in oil and gas related extraction processes are reproduced for reference. Energy cost and production are given for oil and gas well drilling, crude oil and production, national gas production, and natural gas liquid production.

  10. Thermal plasma chemical synthesis of powders

    SciTech Connect (OSTI)

    Vogt, G.J.; Newkirk, L.R.

    1985-01-01T23:59:59.000Z

    Thermal plasma processing has been increasingly used to synthesize submicron powders of high-purity ceramics and metals. The high temperatures generated with the plasma provide a vapor phase reaction zone for elements with high boiling points and refractory materials. An overview is presented on the general plasma technology used in synthesis and on the properties of plasma powders.

  11. Wet powder seal for gas containment

    DOE Patents [OSTI]

    Stang, Louis G. (Sayville, NY)

    1982-01-01T23:59:59.000Z

    A gas seal is formed by a compact layer of an insoluble powder and liquid filling the fine interstices of that layer. The smaller the particle size of the selected powder, such as sand or talc, the finer will be the interstices or capillary spaces in the layer and the greater will be the resulting sealing capacity, i.e., the gas pressure differential which the wet powder layer can withstand. Such wet powder seal is useful in constructing underground gas reservoirs or storage cavities for nuclear wastes as well as stopping leaks in gas mains buried under ground or situated under water. The sealing capacity of the wet powder seal can be augmented by the hydrostatic head of a liquid body established over the seal.

  12. LONG TERM FILE MIGRATION - PART II: FILE REPLACEMENT ALGORITHMS

    E-Print Network [OSTI]

    Jay Smith, Alan

    2011-01-01T23:59:59.000Z

    MIGRATION· PART II: FILE REPLACEMENT ALGORITHMS Alan Jaymay vary even though replacement fi~~d the pa~ameter value PIe N - P ;, RT I r:. fILE REPLACEMENT ALGORITHMS. I.lan ~1ar

  13. LIQUID PHASE SINTERING OF IRON WITH COPPER BASE ALLOY POWDERS

    E-Print Network [OSTI]

    Chen, M.-H.

    2010-01-01T23:59:59.000Z

    Symposium on Powder Metallurgy - The Iron and Steel Inst.a Liquid Phase", Powder Metallurgy, 17 (33), 227 (1974). H.Other made by powder metallurgy techniques. ses to produce

  14. KOINOTITES: A Web Usage Mining Tool for Personalization

    E-Print Network [OSTI]

    Paliouras, George

    KOINOTITES: A Web Usage Mining Tool for Personalization Dimitrios Pierrakos Inst. of Informatics@iit.demokritos.gr SUMMARY This paper presents the Web Usage Mining system KOINOTITES, which uses data mining techniques for the construction of user communities on the Web. User communities model groups of visitors in a Web site, who have

  15. A MOOS MODULE FOR MONITORING ENERGY USAGE OF AUTONOMOUS VEHICLES

    E-Print Network [OSTI]

    Idaho, University of

    A MOOS MODULE FOR MONITORING ENERGY USAGE OF AUTONOMOUS VEHICLES Anthony Kanago, Kevin Roos, James--Tracking the energy usage of an autonomous underwater vehicle (AUV) and making accurate data available provides is particularly relevant in the context of long, open-sea missions: energy consumption. A vehicle operating

  16. Research article Statistics usage by French academic libraries a

    E-Print Network [OSTI]

    Boyer, Edmond

    1/15 Research article Statistics usage by French academic libraries ­ a survey Chérifa BOUKACEM of digital resources in academic libraries, the small number of articles dedicated to the processing of usage-ZEGHMOURI Université Lyon 1 Joachim SCH�PFEL Université Charles-de-Gaulle Lille 3 Abstract The article presents

  17. apatite powders prepared: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , and thermal properties of Nafion powders prepared by high-energy ball milling of pellets is given. Nafion powders prepared in this manner exhibit thermal behavior similar...

  18. Electrochemical Studies of Packed Iron Powder Electrodes: Effects...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Packed Iron Powder Electrodes: Effects of Common Constituents of Natural Waters on Corrosion Electrochemical Studies of Packed Iron Powder Electrodes: Effects of Common...

  19. Powder Metal Performance Modeling of Automotive Components ?AMD...

    Energy Savers [EERE]

    Powder Metal Performance Modeling of Automotive Components AMD 410 Powder Metal Performance Modeling of Automotive Components AMD 410 Presentation from the U.S. DOE Office of...

  20. Solid State Processing of New Low Cost Titanium Powders Enabling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Processing of New Low Cost Titanium Powders Enabling Affordable Automotive Components Solid State Processing of New Low Cost Titanium Powders Enabling Affordable Automotive...

  1. Neutron Powder Diffraction and Molecular Simulation Study of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Powder Diffraction and Molecular Simulation Study of the Structural Evolution of Ammonia Borane from 15 to 340 K. Neutron Powder Diffraction and Molecular Simulation Study of the...

  2. Continuous blending of dry pharmaceutical powders

    E-Print Network [OSTI]

    Pernenkil, Lakshman

    2008-01-01T23:59:59.000Z

    Conventional batch blending of pharmaceutical powders coupled with long quality analysis times increases the production cycle time leading to strained cash flows. Also, scale-up issues faced in process development causes ...

  3. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN)

    2001-01-01T23:59:59.000Z

    A biaxially textured alloy article comprises Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacted and heat treated, then rapidly recrystallized to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

  4. The Impact of Residential Density on Vehicle Usage and Energy Consumption

    E-Print Network [OSTI]

    Golob, Thomas F; Brownstone, David

    2005-01-01T23:59:59.000Z

    on Vehicle Usage and Energy Consumption References Bento,Vehicle Usage and Energy Consumption UCI-ITS-WP-05-1 Thomason Vehicle Usage and Energy Consumption Thomas F. Golob

  5. Tantalum powder consolidation, modeling and properties

    SciTech Connect (OSTI)

    Bingert, S.R.; Vargas, V.D.; Sheinberg, H.C.

    1996-10-01T23:59:59.000Z

    A systematic approach was taken to investigate the consolidation of tantalum powders. The effects of sinter time, temperature and ramp rate; hot isostatic pressing (HIP) temperature and time; and powder oxygen content on consolidation density, kinetics, microstructure, crystallographic texture, and mechanical properties have been evaluated. In general, higher temperatures and longer hold times resulted in higher density compacts with larger grain sizes for both sintering and HIP`ing. HIP`ed compacts were consistently higher in density than sintered products. The higher oxygen content powders resulted in finer grained, higher density HIP`ed products than the low oxygen powders. Texture analysis showed that the isostatically processed powder products demonstrated a near random texture. This resulted in isotropic properties in the final product. Mechanical testing results showed that the HIP`ed powder products had consistently higher flow stresses than conventionally produced plates, and the sintered compacts were comparable to the plate material. A micromechanics model (Ashby HIP model) has been employed to predict the mechanisms active in the consolidation processes of cold isostatic pressing (CIP), HIP and sintering. This model also predicts the density of the end product and whether grain growth should be expected under the applied processing conditions.

  6. Mining data on usage of electronic nicotine delivery systems (ENDS) from YouTube videos

    E-Print Network [OSTI]

    Talbot, Prue

    2013-01-01T23:59:59.000Z

    by group.bmj.com Research paper Mining data on usage of2013 - Published by group.bmj.com Mining data on usage of

  7. The impact of residential density on vehicle usage and fuel consumption

    E-Print Network [OSTI]

    Kim, Jinwon; Brownstone, David

    2010-01-01T23:59:59.000Z

    characteristics on household residential choice and auto2009. The impact of residential density on vehicle usage and2010-05) The impact of residential density on vehicle usage

  8. The Impact of Residential Density on Vehicle Usage and Energy Consumption

    E-Print Network [OSTI]

    Golob, Thomas F.; Brownstone, David

    2005-01-01T23:59:59.000Z

    Vehicle Usage and Energy Consumption Table 2 Housing Unitsresidential vehicular energy consumption is graphed as aon Vehicle Usage and Energy Consumption with vehicles, but

  9. VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase ____________________________ Week Ended (Sunday) _________________

    E-Print Network [OSTI]

    Yang, Zong-Liang

    VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase ____________________________ Week Ended (Sunday) _________________ Door #____________ License Plate ____________________ Vehicle/Supplies (Enter Description such as grade sheets, artifacts, money, etc.) 6. Taking vehicle to Automotive Shop

  10. EQPT, a data file preprocessor for the EQ3/6 software package: User`s guide and related documentation (Version 7.0); Part 2

    SciTech Connect (OSTI)

    Daveler, S.A.; Wolery, T.J.

    1992-12-17T23:59:59.000Z

    EQPT is a data file preprocessor for the EQ3/6 software package. EQ3/6 currently contains five primary data files, called datao files. These files comprise alternative data sets. These data files contain both standard state and activity coefficient-related data. Three (com, sup, and nea) support the use of the Davies or B-dot equations for the activity coefficients; the other two (hmw and pit) support the use of Pitzer`s (1973, 1975) equations. The temperature range of the thermodynamic data on these data files varies from 25{degrees}C only to 0-300{degrees}C. The principal modeling codes in EQ3/6, EQ3NR and EQ6, do not read a data0 file, however. Instead, these codes read an unformatted equivalent called a data1 file. EQPT writes a datal file, using the corresponding data0 file as input. In processing a data0 file, EQPT checks the data for common errors, such as unbalanced reactions. It also conducts two kinds of data transformation. Interpolating polynomials are fit to data which are input on temperature adds. The coefficients of these polynomials are then written on the datal file in place of the original temperature grids. A second transformation pertains only to data files tied to Pitzer`s equations. The commonly reported observable Pitzer coefficient parameters are mapped into a set of primitive parameters by means of a set of conventional relations. These primitive form parameters are then written onto the datal file in place of their observable counterparts. Usage of the primitive form parameters makes it easier to evaluate Pitzer`s equations in EQ3NR and EQ6. EQPT and the other codes in the EQ3/6 package are written in FORTRAN 77 and have been developed to run under the UNIX operating system on computers ranging from workstations to supercomputers.

  11. Slip casting nano-particle powders for making transparent ceramics

    DOE Patents [OSTI]

    Kuntz, Joshua D. (Livermore, CA); Soules, Thomas F. (Livermore, CA); Landingham, Richard Lee (Livermore, CA); Hollingsworth, Joel P. (Oakland, CA)

    2011-04-12T23:59:59.000Z

    A method of making a transparent ceramic including the steps of providing nano-ceramic powders in a processed or unprocessed form, mixing the powders with de-ionized water, the step of mixing the powders with de-ionized water producing a slurry, sonifing the slurry to completely wet the powder and suspend the powder in the de-ionized water, separating very fine particles from the slurry, molding the slurry, and curing the slurry to produce the transparent ceramic.

  12. Mthodes et outils pour l'observation et l'analyse des usages tudier les usages pdagogiques

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    l'éducation, Min. de l'éducation : yves.laborey@education.gouv.fr, Sommaire PNER #12;2 Table des...................................................................................... 5 1. Les enjeux des études d'usages des TICs en éducation et en formation

  13. Die-target for dynamic powder consolidation

    DOE Patents [OSTI]

    Flinn, J.E.; Korth, G.E.

    1985-06-27T23:59:59.000Z

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

  14. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-10-21T23:59:59.000Z

    A strengthened, biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed, compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: Ni, Ag, Ag--Cu, Ag--Pd, Ni--Cu, Ni--V, Ni--Mo, Ni--Al, Ni--Cr--Al, Ni--W--Al, Ni--V--Al, Ni--Mo--Al, Ni--Cu--Al; and at least one fine metal oxide powder; the article having a grain size which is fine and homogeneous; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  15. rfs Remote File System Softwarepraktikum fur Fortgeschrittene

    E-Print Network [OSTI]

    rfs ­ Remote File System Softwarepraktikum f¨ur Fortgeschrittene Parallele und Verteilte Systeme. Overview 5 2.1. Remote File System Daemon . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2. Remote File System Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.3. Global Remote

  16. How to use the m-files

    E-Print Network [OSTI]

    shaoh

    2008-11-05T23:59:59.000Z

    How to use the m- files? There is a basic idea of using m-files in Matlab. That is : the m-files written by you ( and you want to use it ) should be in the current ...

  17. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, Ival O. (Dayton, OH)

    1995-01-01T23:59:59.000Z

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

  18. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, I.O.

    1995-12-26T23:59:59.000Z

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figs.

  19. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, I.O.

    1994-12-06T23:59:59.000Z

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figures.

  20. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, Ival O. (Dayton, OH)

    1994-01-01T23:59:59.000Z

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

  1. Usage Mining for the World Wide Web WenChen Hu, wenchen@cs.und.edu

    E-Print Network [OSTI]

    Hu, Wen-Chen

    Usage Mining for the World Wide Web Wen­Chen Hu, wenchen@cs.und.edu Department of Computer Science@mail.tku.edu.tw Department of Information Engineering, Tamkang University, Tamsui, Taiwan ABSTRACT Web usage mining is used an overview and analysis of current Web usage mining technologies and systems. A Web usage mining system

  2. A Framework for Personal Web Usage Mining Yongjian Fu Ming-Yi Shih

    E-Print Network [OSTI]

    Fu, Yongjian

    A Framework for Personal Web Usage Mining Yongjian Fu Ming-Yi Shih Department of Computer Science-0350 Rolla, MO 65409-0350 yongjian@umr.edu mingyi@umr.edu Abstract In this paper, we propose to mine Web usage data on client side, or personal Web usage mining, as a complement to the server side Web usage

  3. A Framework for Personal Web Usage Mining Yongjian Fu MingYi Shih

    E-Print Network [OSTI]

    Fu, Yongjian

    A Framework for Personal Web Usage Mining Yongjian Fu Ming­Yi Shih Department of Computer Science­0350 Rolla, MO 65409­0350 yongjian@umr.edu mingyi@umr.edu Abstract In this paper, we propose to mine Web usage data on client side, or personal Web usage mining, as a complement to the server side Web usage

  4. The Umbrella File System: Storage Management Across Heterogeneous Devices

    E-Print Network [OSTI]

    Garrison, John Allen

    2011-08-08T23:59:59.000Z

    coherent directory structure for users. Particular files are directed to appropriate underlying file systems by intercepting system calls connecting the Virtual File System (VFS) to the underlying file systems. Files are evaluated by a policy module...

  5. AN INVESTIGATION OF A THERMOPLASTIC-POWDER METALLURGY PROCESS FOR THE FABRICATION OF POROUS NIOBIUM RODS

    E-Print Network [OSTI]

    Nordin, Dennis R.

    2011-01-01T23:59:59.000Z

    Compositions, Powder Metallurgy, Vol. 8, No. 16, 1965. W.THERMOPLASTIC- POWDER METALLURGY PROCESS FOR THE FABRICATIONTHERMOPLASTIC- POWDER METALLURGY PROCESS FOR THE FABRICATION

  6. Powder River 0 20 40 KILOMETERS

    E-Print Network [OSTI]

    .S. coal basins. The Powder River Basin (PRB) in northeastern Wyoming and southeastern Montana (fig. 1 tons (MST), some 42 percent of the total coal pro- duction in the United States, making the PRB the single most important coal-producing basin in the Nation. About 426 MST (92 percent of total PRB coal

  7. Commercial Building Tenant Energy Usage Aggregation and Privacy

    SciTech Connect (OSTI)

    Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.; Wang, Na

    2014-10-31T23:59:59.000Z

    A growing number of building owners are benchmarking their building energy use. This requires the building owner to acquire monthly whole-building energy usage information, which can be challenging for buildings in which individual tenants have their own utility meters and accounts with the utility. Some utilities and utility regulators have turned to aggregation of customer energy use data (CEUD) as a way to give building owners whole-building energy usage data while protecting customer privacy. Meter profile aggregation adds a layer of protection that decreases the risk of revealing CEUD as the number of meters aggregated increases. The report statistically characterizes the similarity between individual energy usage patterns and whole-building totals at various levels of meter aggregation.

  8. Mining Software Usage with the Automatic Library Tracking Database (ALTD)

    SciTech Connect (OSTI)

    Hadri, Bilel [ORNL; Fahey, Mark R [ORNL

    2013-01-01T23:59:59.000Z

    Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

  9. JPEG File Interchange Format

    E-Print Network [OSTI]

    Hamilton, Eric

    2004-03-30T23:59:59.000Z

    interchange format compressed image representation • PC or Mac or Unix workstation compatible • Standard color space: one or three components. For three components, YCbCr (CCIR 601-256 levels) • APP0 marker used to specify Units, X pixel density, Y pixel... by the Macintosh but not by PCs or workstations. JPEG File Interchange Format, Version 1.02 2 Standard color space The color space to be used is YCbCr as defined by CCIR 601 (256 levels). The RGB components calculated by linear conversion from YCbCr shall...

  10. Signature on File

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9 SeptemberSettingUncertainties ElitzaSignon File

  11. Unix File Permissions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence mayUndergraduateAbout Us / OurPast EventsFile

  12. MEMORANDUfl J: FILE DATE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling CorpNewCF INDUSTRIES,L? .-IGYS IDCSTEJ: FILE

  13. TO: FILE FROM: SUBJECT:

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj: ;;I : T'ncZl' lO--23,TO: FILE

  14. TO: FILE MEMORANDUM

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj: ;;I : T'ncZl'FILE MEMORANDUM

  15. Franklin File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget(DANCE) TargetForms &FrancisEmailFile

  16. Euclid File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA) /Email Announcements Archive Email AnnouncementsFile

  17. Consolidation of aluminum 6061 powder by equal channel angular extrusion 

    E-Print Network [OSTI]

    Pearson, John Montgomery

    1997-01-01T23:59:59.000Z

    Equal channel angular extrusion is a promising approach to obtaining full density in powder metallurgy applications. This method can impose large effective deformations through uniform shear strain. Aluminum alloy 6061 powder is used as a test...

  18. SIS a new SFF method based on powder

    E-Print Network [OSTI]

    Asiabanpour, Bahram - Department of Engineering and Technology, Texas State University

    . This approach, used by SLS and 3D printing, is able to create thin and uniformly dense powder layers. Other

  19. Chemical Preparation of Carbonated Calcium Hydroxyapatite Powders at 37

    E-Print Network [OSTI]

    Tas, A. Cuneyt

    Chemical Preparation of Carbonated Calcium Hydroxyapatite Powders at 37 C in Urea-phase ceramic powder. Carbonated HA powders were formed from calcium nitrate tetrahydrate and di- ammonium properties. They were usually observed1 to be carbonate-substituted and calcium-de®cient. Synthetic body

  20. Thermite powder ignition by localized microwaves Yehuda Meir, Eli Jerby

    E-Print Network [OSTI]

    Jerby, Eli

    - propagating high-temperature synthesis (SHS) for sintering of ceramic composites [14]. The magnetic (H, the microwave energy is supplied locally to the powder. It creates a confined hotspot, and initiates a self-propagating the powder prior to its ignition is simulated theoretically, taking into account the powder's temperature

  1. Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns

    E-Print Network [OSTI]

    Cook, Diane J.

    Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns Edwin O in an environment can be mined to discover significant patterns, which an intelligent agent could use to automate of two prediction algorithms, thus demonstrating multiple uses for a home automation system. Finally, we

  2. Statler College Research Data Center Access and Usage Policy

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Statler College Research Data Center Access and Usage Policy Objective Access to the Statler under WVU and federal guidelines. Scope This policy applies to all Statler staff, faculty, administrators, officers, contractors and students. Policy Access to the RDC shall be limited to those authorized

  3. Towards activity-relevant attribution of IT energy usage

    E-Print Network [OSTI]

    Chaudhuri, Surajit

    Towards activity-relevant attribution of IT energy usage From a previous study we were able to disaggregate per socket energy consumption from whole domicile energy consumption. We discovered that Home preparation/storage, it is the largest contributor to personal energy consumption. Understanding how and when

  4. Who Is Buying PEVS in California? Exploring Household and Usage

    E-Print Network [OSTI]

    California at Davis, University of

    Additional vehicle "Vehicle Change" Replaced Will Replace Additional vehicle #12;8/3/2012 8 Hybrid Ownership (Hybrid) General pop have Hybrid Vehicle Usage and Charging #12;8/3/2012 9 Driver Characteristics ·Average 4 5 6 7 8 9 10 11 12 Sample M h #12;8/3/2012 2 Respondents Locations 3 Nissan LEAFs Vehicle

  5. A Web Usage Mining Framework for Web Directories Personalization

    E-Print Network [OSTI]

    Kouroupetroglou, Georgios

    A Web Usage Mining Framework for Web Directories Personalization Dimitrios Pierrakos Department framework that combines Web personalization and Web directories, which results in the concept of Community Web Directories. Community Web directories is a novel form of personalization performed on Web

  6. Personalizing Web Directories with the Aid of Web Usage Data

    E-Print Network [OSTI]

    Paliouras, George

    Personalizing Web Directories with the Aid of Web Usage Data Dimitrios Pierrakos, Member, IEEE of Community Web Directories, a concept that we introduced in our recent work, applying personalization to Web directories. In this context, the Web directory is viewed as a thematic hierarchy and personalization

  7. Energy Usage Attitudes of Urban India IBM Research India

    E-Print Network [OSTI]

    Toronto, University of

    Energy Usage Attitudes of Urban India Mohit Jain IBM Research India mohitjain@in.ibm.com Deepika@cs.cmu.edu Amarjeet Singh IIIT Delhi, India amarjeet@iiitd.ac.in Abstract-- Though rapid increase in energy factors affecting energy consumption in urban India. However, the small numbers of participants in those

  8. Fuel bundle design for enhanced usage of plutonium fuel

    DOE Patents [OSTI]

    Reese, Anthony P. (San Jose, CA); Stachowski, Russell E. (Fremont, CA)

    1995-01-01T23:59:59.000Z

    A nuclear fuel bundle includes a square array of fuel rods each having a concentration of enriched uranium and plutonium. Each rod of an interior array of the rods also has a concentration of gadolinium. The interior array of rods is surrounded by an exterior array of rods void of gadolinium. By this design, usage of plutonium in the nuclear reactor is enhanced.

  9. Dynamic Memory Usage Optimization using ILP and J. Ramanujam2

    E-Print Network [OSTI]

    Ramanujam, J. "Ram"

    computing field such as electronic structure calculations, and in several other contexts. We are considering sizes M like those arising in scientific computing such as electronic structure calculations [1, 2, 3Dynamic Memory Usage Optimization using ILP A. Allam1 and J. Ramanujam2 1 Electrical Engineering

  10. Transportation & Work: Exploring Car Usage and Employment Outcomes

    E-Print Network [OSTI]

    Bertini, Robert L.

    Transportation & Work: Exploring Car Usage and Employment Outcomes in the LSAL Data Field Area of 1996, or "welfare reform," attention turned to the role of transportation in job search and employment information on car ownership as well as employment history, literacy proficiency, and measures of social

  11. Exploiting Memory Usage Patterns to Improve Garbage Collections in Java

    E-Print Network [OSTI]

    Lau, Francis C.M.

    Exploiting Memory Usage Patterns to Improve Garbage Collections in Java Liangliang Tong Department Science The University of Hong Kong fcmlau@cs.hku.hk Abstract Copying-based garbage collectors It is a common belief, however, that ob- jects' survival rates are generally too low to make full use

  12. Accountable Anonymous Service Usage in Mobile Communication Systems \\Lambda

    E-Print Network [OSTI]

    Bencsáth, Boldizsár

    to one particular physical location. From a technology perspective, mobile communication systems haveAccountable Anonymous Service Usage in Mobile Communication Systems \\Lambda Levente Butty of Technology CH­1015 Lausanne, Switzerland fLevente.Buttyan, Jean­Pierre.Hubauxg@epfl.ch 23rd June 1999

  13. An Analysis of Anonymity Technology Usage Bingdong Li1

    E-Print Network [OSTI]

    Gunes, Mehmet Hadi

    criminals to hide themselves. In this paper, we provide usage and geo-location analysis of major- linkability, i.e., observers can not link an agent to a specific message or action. Equally contributing a dichotomous issue in both social life and cy- ber space. Anonymity technologies have been used for criminal

  14. Personalized Power Saving Profiles Generation Analyzing Smart Device Usage Patterns

    E-Print Network [OSTI]

    Gesbert, David

    Personalized Power Saving Profiles Generation Analyzing Smart Device Usage Patterns Soumya Kanti interactions of smart devices. This paper describes a client-server architecture that proposes personalized and they are sent back to the smart devices. These profiles are highly personalized since they are developed

  15. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, I.O.

    1992-04-21T23:59:59.000Z

    A free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7 [times] 10[sup [minus]3] to about 7 [times] 10[sup [minus]2] microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 9 figs.

  16. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, I.O.

    1993-10-19T23:59:59.000Z

    Free flowing, conformable powder-like mix of silica particles and a phase change material (pcm) is disclosed. The silica particles have a critical size of about 7[times]10[sup [minus]3] to about 7[times]10[sup [minus]2] microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 10 figures.

  17. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, I.O.

    1994-02-01T23:59:59.000Z

    Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 2 figures.

  18. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, I.O.

    1993-05-18T23:59:59.000Z

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7[times]10[sup [minus]3] to about 7[times]10[sup [minus]2] microns and the p.c.m. must be added to the silica in an amount of 80 wt. % or less p.c.m. per combined weight of silica and p.c.m. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a p.c.m. material. The silica-p.c.m. mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  19. HTS powder synthesis and wire sintering

    SciTech Connect (OSTI)

    Peterson, D. [Los Alamos National Lab., NM (United States)

    1994-07-29T23:59:59.000Z

    Successful processing of HTS wires that exhibit superconducting properties and lengths appropriate for applications requires thoroughly understanding and carefully controlling experimental parameters. Initial important processing considerations are the quality and nature of the powder used to produce the superconductor within the wire composite. Following fabrication of the wire, sintering conditions must be chosen based on a knowledge of the phase behavior of the associated materials. HTS wire studies with our industrial partners have involved Bi-2212, Bi-2223, and Tl-1223 based systems. The goals of this project`s efforts in these collaborations have been directed towards: (1) Establishing procedures for HTS powder syntheses that produce superconductors with optimal properties; (2) Studying conditions for HTS wire sintering that produce high current densities appropriate for conductor applications. The Los Alamos project involves 6 staff, 3 technicians, and 4 postdoctoral students.

  20. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, Ival O. (Dayton, OH)

    1994-01-01T23:59:59.000Z

    Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  1. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, Ival O. (Dayton, OH)

    1993-01-01T23:59:59.000Z

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garmets, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  2. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, Ival O. (Dayton, OH)

    1993-01-01T23:59:59.000Z

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  3. Dry powder mixes comprising phase change materials

    DOE Patents [OSTI]

    Salyer, Ival O. (Dayton, OH)

    1992-01-01T23:59:59.000Z

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  4. Fabricating solid carbon porous electrodes from powders

    DOE Patents [OSTI]

    Kaschmitter, James L. (Pleasanton, CA); Tran, Tri D. (Livermore, CA); Feikert, John H. (Livermore, CA); Mayer, Steven T. (San Leandro, CA)

    1997-01-01T23:59:59.000Z

    Fabrication of conductive solid porous carbon electrodes for use in batteries, double layer capacitors, fuel cells, capacitive dionization, and waste treatment. Electrodes fabricated from low surface area (<50 m.sup.2 /gm) graphite and cokes exhibit excellent reversible lithium intercalation characteristics, making them ideal for use as anodes in high voltage lithium insertion (lithium-ion) batteries. Electrodes having a higher surface area, fabricated from powdered carbon blacks, such as carbon aerogel powder, carbon aerogel microspheres, activated carbons, etc. yield high conductivity carbon compositives with excellent double layer capacity, and can be used in double layer capacitors, or for capacitive deionization and/or waste treatment of liquid streams. By adding metallic catalysts to be high surface area carbons, fuel cell electrodes can be produced.

  5. Fabricating solid carbon porous electrodes from powders

    DOE Patents [OSTI]

    Kaschmitter, J.L.; Tran, T.D.; Feikert, J.H.; Mayer, S.T.

    1997-06-10T23:59:59.000Z

    Fabrication is described for conductive solid porous carbon electrodes for use in batteries, double layer capacitors, fuel cells, capacitive deionization, and waste treatment. Electrodes fabricated from low surface area (<50 m{sup 2}/gm) graphite and cokes exhibit excellent reversible lithium intercalation characteristics, making them ideal for use as anodes in high voltage lithium insertion (lithium-ion) batteries. Electrodes having a higher surface area, fabricated from powdered carbon blacks, such as carbon aerogel powder, carbon aerogel microspheres, activated carbons, etc. yield high conductivity carbon composites with excellent double layer capacity, and can be used in double layer capacitors, or for capacitive deionization and/or waste treatment of liquid streams. By adding metallic catalysts to high surface area carbons, fuel cell electrodes can be produced. 1 fig.

  6. The reflection of very cold neutrons from diamond powder nanoparticles

    E-Print Network [OSTI]

    V. V. Nesvizhevsky; E. V. Lychagin; A. Yu. Muzychka; A. V. Strelkov; G. Pignol; K. V. Protasov

    2008-05-17T23:59:59.000Z

    We study possibility of efficient reflection of very cold neutrons (VCN) from powders of nanoparticles. In particular, we measured the scattering of VCN at a powder of diamond nanoparticles as a function of powder sample thickness, neutron velocity and scattering angle. We observed extremely intense scattering of VCN even off thin powder samples. This agrees qualitatively with the model of independent nanoparticles at rest. We show that this intense scattering would allow us to use nanoparticle powders very efficiently as the very first reflectors for neutrons with energies within a complete VCN range up to $10^{-4}$ eV.

  7. Powder Dropper | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah Project Office PressPostdoctoraldecadal7Powder Dropper This device

  8. Silicon nitride/silicon carbide composite densified materials prepared using composite powders

    DOE Patents [OSTI]

    Dunmead, S.D.; Weimer, A.W.; Carroll, D.F.; Eisman, G.A.; Cochran, G.A.; Susnitzky, D.W.; Beaman, D.R.; Nilsen, K.J.

    1997-07-01T23:59:59.000Z

    Prepare silicon nitride-silicon carbide composite powders by carbothermal reduction of crystalline silica powder, carbon powder and, optionally, crystalline silicon nitride powder. The crystalline silicon carbide portion of the composite powders has a mean number diameter less than about 700 nanometers and contains nitrogen. The composite powders may be used to prepare sintered ceramic bodies and self-reinforced silicon nitride ceramic bodies.

  9. Save PDF files as Word documents You can save a PDF file as a Word document, even if the file was originally created in a

    E-Print Network [OSTI]

    Segraves, Kari A.

    Save PDF files as Word documents You can save a PDF file as a Word document, even if the file to save. 2. Choose File > Save As > Microsoft Word > Word Document. The Word Document command saves File > Save As > Microsoft Word > Word 97-2003 Document to save a DOC file. Tip: If you want to save

  10. MEMORANDU TO: FILE FHOM: SUBJECT:

    Office of Legacy Management (LM)

    TO: FILE FHOM: SUBJECT: Curre"t: Ll&k&&d l- ; if yes, date contacted 0 Production scale testing Cl Pilot Scale 0 Bench Scale Process 0 Theoretical Studies 0 Sample &...

  11. Jefferson Lab's Education web site hits new high-usage record...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    web site hits new high-usage record during 2003 SOL season April 2, 2003 Jefferson Lab's Science Education web site is hitting new highs in usage - on a daily basis. Just yesterday...

  12. Jefferson Lab's Education Web Site Hits New High-Usage Record...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Web Site Hits New High-Usage Record April 22, 2002 Jefferson Lab's Science Education web site hit a new high in usage yesterday. In a 24-hour-period nearly 125,000 pages were...

  13. Towards sustainable material usage : time-dependent evaluation of upgrading technologies for recycling

    E-Print Network [OSTI]

    Gaustad, Gabrielle G

    2009-01-01T23:59:59.000Z

    As consumption in the US grows, so does concern about sustainable materials usage. Increasing recycling is a key component within a broad arsenal of strategies for moving towards sustainable materials usage. There are many ...

  14. Energy Department Announces $4.5 Million to Expand Usage of Alternativ...

    Energy Savers [EERE]

    4.5 Million to Expand Usage of Alternative Fuels Energy Department Announces 4.5 Million to Expand Usage of Alternative Fuels July 16, 2014 - 11:00am Addthis In support of...

  15. "Table HC10.5 Space Heating Usage Indicators by U.S. Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by U.S. Census Region, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Space Heating Usage...

  16. Residential insecticide usage in northern California homes with young XIANGMEI (MAY) WUa

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    Residential insecticide usage in northern California homes with young children XIANGMEI (MAY) WUa of Health and Environment, Seoul National University, Seoul, South Korea Residential insecticide usage and August 2008. Structured telephone interviews were conducted collecting information on residential use

  17. The relationship between children's computer game usage and creativity in Korea 

    E-Print Network [OSTI]

    Lee, Kyung-Sook

    2009-05-15T23:59:59.000Z

    Economic Status) affected children?s creativity scores and computer game usage. Children using computer games heavily showed significantly higher scores on the scale of Figural Originality than those with moderate usage. Highly structured activity students...

  18. Creation of Chimera Through the Usage of an Inspirational System

    E-Print Network [OSTI]

    Parish, Brandi Nicole

    2013-04-23T23:59:59.000Z

    CREATION OF CHIMERA THROUGH THE USAGE OF AN INSPIRATIONAL SYSTEM A Thesis by BRANDI NICOLE PARISH Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE Approved by: Chair of Committee, Carol LaFayette Committee Members, Frederic Parke Kevin Glowacki Head of Department, Tim McLaughlin May 2013 Major Subject: Visualization Copyright 2013 Brandi Nicole Parish ii...

  19. Fuel bundle design for enhanced usage of plutonium fuel

    DOE Patents [OSTI]

    Reese, A.P.; Stachowski, R.E.

    1995-08-08T23:59:59.000Z

    A nuclear fuel bundle includes a square array of fuel rods each having a concentration of enriched uranium and plutonium. Each rod of an interior array of the rods also has a concentration of gadolinium. The interior array of rods is surrounded by an exterior array of rods void of gadolinium. By this design, usage of plutonium in the nuclear reactor is enhanced. 10 figs.

  20. Residential Lighting Usage Estimate Tool, v1.0

    Broader source: Energy.gov [DOE]

    By improving our understanding of residential lighting-energy usage and quantifying it across many different parameters, the new study will be of use to anyone doing energy estimates – such as utilities, market and investment analysts, and government agencies. It will also help manufacturers design products that not only better serve consumers' needs, but that maximize the energy savings that technologies like SSL make possible.

  1. SUPPORT VECTOR CLUSTERING FOR WEB USAGE MINING WEI SHUNG CHUNG

    E-Print Network [OSTI]

    Gruenwald, Le

    is to present a comparison study of SVC and K- means for Web usage data mining using real-life Web logs. (http://www.hippocrates.ouhsc.edu) We chose K-means for comparison because it is a widely used algorithm for clustering. (Shahabi et al. Section 2 describes SVC and K-means. Section 3 and 4 present the comparison studies and experimental

  2. Central Puget Sound freeway network usage and performance. Research report

    SciTech Connect (OSTI)

    Ishimaru, J.M.; Hallenbeck, M.E.

    1999-03-01T23:59:59.000Z

    The summary report presents an overview of the level of traveler usage (e.g., how many vehicles use the freeways) and travel performance (e.g., how fast they are traveling, where and how often congestion occurs) on the principal urban freeways in the central Puget Sound area for 1997. Data presented in this report were collected by the Washington State Department of Transportation`s (WDSOT`s) freeway surveillance system.

  3. Proper Usage of Drugs and Chemicals in Food Animals

    E-Print Network [OSTI]

    Faries Jr., Floron C.

    2002-02-15T23:59:59.000Z

    Federal regulations exist to ensure the proper distribution and usage of veterinary drugs and to prevent adulteration of the food supply with illegal drug residues through drug misuse in food produc- ing animals. The Food and Drug Administration... of omission or commission, violative residues in livestock and poultry (by irresponsible and illegal distribution and use of drugs) violates state and federal laws. When FSIS inspectors detect violative drug residues in food products derived from ani- mals...

  4. Adopted Version 1 Georgia Tech's "BuzzPort" Portal Usage Policy

    E-Print Network [OSTI]

    Li, Mo

    Adopted Version 1 Georgia Tech's "BuzzPort" Portal Usage Policy v. 7.1 1.0 PURPOSE This Policy are highly valued and sensitive Institute resources. This Policy establishes an acceptable usage framework.0 SCOPE This Policy applies to all authorized BuzzPort usage from any location at all times

  5. Session Lengths and IP Address Usage of Smartphones in a University Campus WiFi

    E-Print Network [OSTI]

    Wang, Bing

    to laptops and desktop PCs, network usage characteristics of smartphones may differ significantly becauseSession Lengths and IP Address Usage of Smartphones in a University Campus WiFi Network be used more opportunistically. In this paper, we study two important network usage characteristics

  6. Results of Comparing Bandwidth Usage and Latency: Service Location Protocol and Jini

    E-Print Network [OSTI]

    Barbeau, Michel

    Results of Comparing Bandwidth Usage and Latency: Service Location Protocol and Jini Javier Govea. This paper focuses on analyzing and evaluating two of these limitations, bandwidth usage and latency, of two present the results of our bandwidth usage analysis and the results a comparison of latency of SLP

  7. Red Storm usage model :Version 1.12.

    SciTech Connect (OSTI)

    Jefferson, Karen L.; Sturtevant, Judith E.

    2005-12-01T23:59:59.000Z

    Red Storm is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Sandia National Laboratories (SNL). The Red Storm Usage Model (RSUM) documents the capabilities and the environment provided for the FY05 Tri-Lab Level II Limited Availability Red Storm User Environment Milestone and the FY05 SNL Level II Limited Availability Red Storm Platform Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and SNL. Additionally, the Red Storm Usage Model maps the provided capabilities to the Tri-Lab ASC Computing Environment (ACE) requirements. The ACE requirements reflect the high performance computing requirements for the ASC community and have been updated in FY05 to reflect the community's needs. For each section of the RSUM, Appendix I maps the ACE requirements to the Limited Availability User Environment capabilities and includes a description of ACE requirements met and those requirements that are not met in that particular section. The Red Storm Usage Model, along with the ACE mappings, has been issued and vetted throughout the Tri-Lab community.

  8. Large Bore Powder Gun Qualification (U)

    SciTech Connect (OSTI)

    Rabern, Donald A. [Los Alamos National Laboratory; Valdiviez, Robert [Los Alamos National Laboratory

    2012-04-02T23:59:59.000Z

    A Large Bore Powder Gun (LBPG) is being designed to enable experimentalists to characterize material behavior outside the capabilities of the NNSS JASPER and LANL TA-55 PF-4 guns. The combination of these three guns will create a capability to conduct impact experiments over a wide range of pressures and shock profiles. The Large Bore Powder Gun will be fielded at the Nevada National Security Site (NNSS) U1a Complex. The Complex is nearly 1000 ft below ground with dedicated drifts for testing, instrumentation, and post-shot entombment. To ensure the reliability, safety, and performance of the LBPG, a qualification plan has been established and documented here. Requirements for the LBPG have been established and documented in WE-14-TR-0065 U A, Large Bore Powder Gun Customer Requirements. The document includes the requirements for the physics experiments, the gun and confinement systems, and operations at NNSS. A detailed description of the requirements is established in that document and is referred to and quoted throughout this document. Two Gun and Confinement Systems will be fielded. The Prototype Gun will be used primarily to characterize the gun and confinement performance and be the primary platform for qualification actions. This gun will also be used to investigate and qualify target and diagnostic modifications through the life of the program (U1a.104 Drift). An identical gun, the Physics Gun, will be fielded for confirmatory and Pu experiments (U1a.102D Drift). Both guns will be qualified for operation. The Gun and Confinement System design will be qualified through analysis, inspection, and testing using the Prototype Gun for the majority of process. The Physics Gun will be qualified through inspection and a limited number of qualification tests to ensure performance and behavior equivalent to the Prototype gun. Figure 1.1 shows the partial configuration of U1a and the locations of the Prototype and Physics Gun/Confinement Systems.

  9. Laser production of articles from powders

    DOE Patents [OSTI]

    Lewis, G.K.; Milewski, J.O.; Cremers, D.A.; Nemec, R.B.; Barbe, M.R.

    1998-11-17T23:59:59.000Z

    Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path. 20 figs.

  10. Laser production of articles from powders

    DOE Patents [OSTI]

    Lewis, Gary K. (Los Alamos, NM); Milewski, John O. (Santa Fe, NM); Cremers, David A. (Los Alamos, NM); Nemec, Ronald B. (White Rock, NM); Barbe, Michael R. (White Rock, NM)

    1998-01-01T23:59:59.000Z

    Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path.

  11. Powder River Energy Corporation | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratiniEdwards,PoseyPoudre Valley R E A,Poway,Powder River

  12. Amorphous powders of Al-Hf prepared by mechanical alloying

    SciTech Connect (OSTI)

    Schwarz, R.B.; Hannigan, J.W.; Sheinberg, H.; Tiainen, T.

    1988-01-01T23:59:59.000Z

    We synthesized amorphous Al/sub 50/Hf/sub 50/ alloy powder by mechanically alloying an equimolar mixture of crystalline powders of Al and Hf using hexane as a dispersant. We characterized the powder as a function of mechanical-alloying time by scanning electron microscopy, x-ray diffraction, and differential scanning calorimetry. Amorphous Al/sub 50/Hf/sub 50/ powder heated at 10 K s/sup /minus/1/ crystallizes polymorphously at 1003 K into orthorhombic AlHf (CrB-type structure). During mechanical alloying, some hexane decomposes and hydrogen and carbon are incorporated into the amorphous alloy powder. The hydrogen can be removed by annealing the powder by hot pressing at a temperature approximately 30 K below the crystallization temperature. The amorphous compacts have a diamond pyramidal hardness of 1025 DPH. 24 refs., 7 figs., 1 tab.

  13. Method for preparing metal powder, device for preparing metal powder, method for processing spent nuclear fuel

    DOE Patents [OSTI]

    Park, Jong-Hee (Clarendon Hills, IL)

    2011-11-29T23:59:59.000Z

    A method for producing metal powder is provided the comprising supplying a molten bath containing a reducing agent, contacting a metal oxide with the molten bath for a time and at a temperature sufficient to reduce the metal in the metal oxide to elemental metal and produce free oxygen; and isolating the elemental metal from the molten bath.

  14. International Powder Metallurgy Conference September 4-8, 2002, Turkish Powder Metallurgy Association

    E-Print Network [OSTI]

    Gubicza, Jenõ

    Canal Univ., Suez, Egypt, mkassem54@yahoo.com c Dept. of General Physics, Eötvös University, Budapest, P the particles of the initial powders are deformed heavily and repeatedly by high energy milling and the atoms and fracturing of the cold welded particles due to high energy collision [1]. The cold welding minimizes

  15. Mach stem characterization in Mbar designs using RSR powder

    SciTech Connect (OSTI)

    Staudhammer, K.P.; Johnson, K.A.

    1985-01-01T23:59:59.000Z

    Suitable selection of powders can be used as a modeling device for complicated experimental designs. The powder melt zone is clearly defined and the RSR-834 powder is reasonably well behaved. This experiment was with only one composition, size and distribution. However, it is believed that other morphologies, composition, and size distributions could result in a more complete modeling of the compaction process that would enable heuristic calculations of the combined effects of adiabatic temperature rise and entropic heating (strain/deformation).

  16. NanoComposite Stainless Steel Powder Technologies

    SciTech Connect (OSTI)

    DeHoff, R.; Glasgow, C. (MesoCoat, Inc.)

    2012-07-25T23:59:59.000Z

    Oak Ridge National Laboratory has been investigating a new class of Fe-based amorphous material stemming from a DARPA, Defense Advanced Research Projects Agency initiative in structural amorphous metals. Further engineering of the original SAM materials such as chemistry modifications and manufacturing processes, has led to the development of a class of Fe based amorphous materials that upon processing, devitrify into a nearly homogeneous distribution of nano sized complex metal carbides and borides. The powder material is produced through the gas atomization process and subsequently utilized by several methods; laser fusing as a coating to existing components or bulk consolidated into new components through various powder metallurgy techniques (vacuum hot pressing, Dynaforge, and hot isostatic pressing). The unique fine scale distribution of microstructural features yields a material with high hardness and wear resistance compared to material produced through conventional processing techniques such as casting while maintaining adequate fracture toughness. Several compositions have been examined including those specifically designed for high hardness and wear resistance and a composition specifically tailored to devitrify into an austenitic matrix (similar to a stainless steel) which poses improved corrosion behavior.

  17. Forming gas treatment of lithium ion battery anode graphite powders

    DOE Patents [OSTI]

    Contescu, Cristian Ion; Gallego, Nidia C; Howe, Jane Y; Meyer, III, Harry M; Payzant, Edward Andrew; Wood, III, David L; Yoon, Sang Young

    2014-09-16T23:59:59.000Z

    The invention provides a method of making a battery anode in which a quantity of graphite powder is provided. The temperature of the graphite powder is raised from a starting temperature to a first temperature between 1000 and 2000.degree. C. during a first heating period. The graphite powder is then cooled to a final temperature during a cool down period. The graphite powder is contacted with a forming gas during at least one of the first heating period and the cool down period. The forming gas includes H.sub.2 and an inert gas.

  18. Joining of parts via magnetic heating of metal aluminum powders

    DOE Patents [OSTI]

    Baker, Ian

    2013-05-21T23:59:59.000Z

    A method of joining at least two parts includes steps of dispersing a joining material comprising a multi-phase magnetic metal-aluminum powder at an interface between the at least two parts to be joined and applying an alternating magnetic field (AMF). The AMF has a magnetic field strength and frequency suitable for inducing magnetic hysteresis losses in the metal-aluminum powder and is applied for a period that raises temperature of the metal-aluminum powder to an exothermic transformation temperature. At the exothermic transformation temperature, the metal-aluminum powder melts and resolidifies as a metal aluminide solid having a non-magnetic configuration.

  19. Tailored net-shape powder composites by spark plasma sintering

    E-Print Network [OSTI]

    Khaleghi, Evan Aryan

    2012-01-01T23:59:59.000Z

    produced by spark plasma sintering”, Powder Metall. , 51, 59nanoparticles in spark plasma sintering. Mater. Sci. Eng. ,Evolution During Spark Plasma Sintering,” Ceram. Int. , 35,

  20. Stabilized Lithium Metal Powder, Enabling Material and Revolutionary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Peer Evaluation es011yakovleva2011p.pdf More Documents & Publications Stabilized Lithium Metal Powder, Enabling Material and Revolutionary Technology for High Energy Li-ion...

  1. advanced powder processing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (SEM) and chemical analysis. The powders were well crystalline and contained oxygen, carbon and hydrogen as impurities. Overall purity was better than 999%. The yield...

  2. COAL QUALITY AND GEOCHEMISTRY, POWDER RIVER BASIN, WYOMING AND MONTANA

    E-Print Network [OSTI]

    in the Powder River Basin in Wyoming and Montana (fig. PQ-1) is considered to be "clean coal." For the location

  3. Controlled powder morphology experiments in megabar 304 stainless steel compaction

    SciTech Connect (OSTI)

    Staudhammer, K.P.; Johnson, K.A.

    1985-01-01T23:59:59.000Z

    Experiments with controlled morphology including shape, size, and size distribution were made on 304L stainless steel powders. These experiments involved not only the powder variables but pressure variables of 0.08 to 1.0 Mbar. Also included are measured container strain on the material ranging from 1.5% to 26%. Using a new strain controllable design it was possible to seperate and control, independently, strain and pressure. Results indicate that powder morphology, size distribution, packing density are among the pertinent parameters in predicting compaction of these powders.

  4. Glow-discharge synthesis of silicon nitride precursor powders

    SciTech Connect (OSTI)

    Ho, P.; Buss, R.J.; Loehman, R.E. (Sandia National Laboratories, Albuquerque, New Mexico 87185-5800 (US))

    1989-07-01T23:59:59.000Z

    A radio-frequency glow discharge is used for the synthesis of submicron, amorphous, silicon nitride precursor powders from silane and ammonia. Powders are produced with a range of Si/N ratios, including stoichiometric, Si-rich, and N-rich, and contain substantial amounts of hydrogen. The powders appear to be similar to silicon diimide and are easily converted to oxide by water vapor. The powders lose weight and crystallize to a mixture of {alpha} and {beta}-Si{sub 3}N{sub 4} after prolonged heating at 1600{degree}C. Studies of spectrally and spatially resolved optical emission from the plasma are reported.

  5. How to batch upload video files with Unison How to batch upload video files with Unison

    E-Print Network [OSTI]

    Benos, Panayiotis "Takis"

    How to batch upload video files with Unison How to batch upload video files with Unison There are two different ways to upload already existing video files into Unison: Upload from the New Session page (only allows one video file to be uploaded at a time) Launching the editor in Composer (allows

  6. A PRACTICAL ONTOLOGY FOR THE LARGE-SCALE MODELING OF SCHOLARLY ARTIFACTS AND THEIR USAGE

    SciTech Connect (OSTI)

    RODRIGUEZ, MARKO A. [Los Alamos National Laboratory; BOLLEN, JOHAN [Los Alamos National Laboratory; VAN DE SOMPEL, HERBERT [Los Alamos National Laboratory

    2007-01-30T23:59:59.000Z

    The large-scale analysis of scholarly artifact usage is constrained primarily by current practices in usage data archiving, privacy issues concerned with the dissemination of usage data, and the lack of a practical ontology for modeling the usage domain. As a remedy to the third constraint, this article presents a scholarly ontology that was engineered to represent those classes for which large-scale bibliographic and usage data exists, supports usage research, and whose instantiation is scalable to the order of 50 million articles along with their associated artifacts (e.g. authors and journals) and an accompanying 1 billion usage events. The real world instantiation of the presented abstract ontology is a semantic network model of the scholarly community which lends the scholarly process to statistical analysis and computational support. They present the ontology, discuss its instantiation, and provide some example inference rules for calculating various scholarly artifact metrics.

  7. Use of nanofiltration to reduce cooling tower water usage.

    SciTech Connect (OSTI)

    Sanchez, Andres L.; Everett, Randy L.; Jensen, Richard Pearson; Cappelle, Malynda A.; Altman, Susan Jeanne

    2010-09-01T23:59:59.000Z

    Nanofiltration (NF) can effectively treat cooling-tower water to reduce water consumption and maximize water usage efficiency of thermoelectric power plants. A pilot is being run to verify theoretical calculations. A side stream of water from a 900 gpm cooling tower is being treated by NF with the permeate returning to the cooling tower and the concentrate being discharged. The membrane efficiency is as high as over 50%. Salt rejection ranges from 77-97% with higher rejection for divalent ions. The pilot has demonstrated a reduction of makeup water of almost 20% and a reduction of discharge of over 50%.

  8. Process for preparing titanium nitride powder

    DOE Patents [OSTI]

    Bamberger, C.E.

    1988-06-17T23:59:59.000Z

    A process for making titanium nitride powder by reaction of titanium phosphates with sodium cyanide. The process of this invention may comprise mixing one or more phosphates of Ti with a cyanide salt in the absence of oxygen and heating to a temperature sufficient to cause reaction to occur. In the preferred embodiment the ratio of cyanide salt to Ti should be at least 2 which results in the major Ti-containing product being TiN rather than sodium titanium phosphate byproducts. The process is an improvement over prior processes since the byproducts are water soluble salts of sodium which can easily be removed from the preferred TiN product by washing. 2 tabs.

  9. Gaseous Decomposition Products of Safety Powders

    E-Print Network [OSTI]

    Cubbison, C.E.

    1912-01-01T23:59:59.000Z

    19.6 Volume o f a i r added 70.8 T o t a l vo lume 90 .4 Volume a f t e r e x p l o s i o n — 74.4 C o n t r a c t i o n 16.0 R e s i d u e a f t e r a b s o r p t i o n o f c a r b o n d i o x i d e 68.8 74.4 6 8 . 8 = 5 .6 . Oxygen p r e s e... DECOMPOSITION PRODUCTS OF SAFETY POWDERS. THESIS SUBMITTED FOR THE DEGREE OF BACHELOR OF SCIENCE I I THE DEPARTMENT OF CHEMICAL BHGUEBRING AT THE UNIVERSITY OF KANSAS. BY C.E.CUBBISOH 1912. RD01D7 MaDSfl COHTEHTS. * * * * Pago * P r e f a c e 6...

  10. Sinterable powders from laser driven reactions : final report

    E-Print Network [OSTI]

    Haggerty, John Scarseth

    1981-01-01T23:59:59.000Z

    Extremely fine, uniform ceramic powders have been synthesized from Sil4 NH3 and C2H4 gas phase reactants that are heated by absorbing optical energy emitted from a C02 laser. Resulting Si, Si3N4 and SiC powders have been ...

  11. File:Rules and Regulations for the Management and Control of...

    Open Energy Info (EERE)

    Facebook icon Twitter icon File:Rules and Regulations for the Management and Control of Designated Ground Water.pdf Jump to: navigation, search File File history File...

  12. File:5 CCR 1001-5 Colorado Stationary Source Permitting and Air...

    Open Energy Info (EERE)

    icon File:5 CCR 1001-5 Colorado Stationary Source Permitting and Air Pollution Control Emission Notice Requirements.pdf Jump to: navigation, search File File history File...

  13. The methods of steam coals usage for coke production

    SciTech Connect (OSTI)

    Korobetskii, I.A.; Ismagilov, M.S.; Nazimov, S.A.; Sladkova, I.L.; Shudrikov, E.S.

    1998-07-01T23:59:59.000Z

    Nowadays, high volatile bituminous coals are broadly used for metallurgical coke production in Russia. The share of such coals in the coking blend is variable from 20 to 40% by weight. There are some large coal deposits in Kuznetskii basin which have coals with low caking tendency. The low caking properties of such coals limit of its application in the coking process. At the same time the usage of low caking coals for coke production would allow flexibility of the feedstock for coke production. Preliminary tests, carried out in COAL-C's lab has shown some differences in coal properties with dependence on the size distribution. That is why the separation of the well-caking fraction from petrographically heterogeneous coals and its further usage in coking process may be promising. Another way for low caking coals application in the coke industry is briquettes production from such coals. This method has been known for a very long time. It may be divided into two possible directions. First is a direct coking of briquettes from the low caking coals. Another way is by adding briquettes to coal blends in defined proportion and combined coking. The possibility of application of coal beneficiation methods mentioned above was investigated in present work.

  14. A Metadata-Rich File System

    SciTech Connect (OSTI)

    Ames, S; Gokhale, M B; Maltzahn, C

    2009-01-07T23:59:59.000Z

    Despite continual improvements in the performance and reliability of large scale file systems, the management of file system metadata has changed little in the past decade. The mismatch between the size and complexity of large scale data stores and their ability to organize and query their metadata has led to a de facto standard in which raw data is stored in traditional file systems, while related, application-specific metadata is stored in relational databases. This separation of data and metadata requires considerable effort to maintain consistency and can result in complex, slow, and inflexible system operation. To address these problems, we have developed the Quasar File System (QFS), a metadata-rich file system in which files, metadata, and file relationships are all first class objects. In contrast to hierarchical file systems and relational databases, QFS defines a graph data model composed of files and their relationships. QFS includes Quasar, an XPATH-extended query language for searching the file system. Results from our QFS prototype show the effectiveness of this approach. Compared to the defacto standard, the QFS prototype shows superior ingest performance and comparable query performance on user metadata-intensive operations and superior performance on normal file metadata operations.

  15. Synthesis of high purity sinterable silicon carbide powder

    SciTech Connect (OSTI)

    Boecker, W.D.; Mehosky, B.L.; Rogers, R.S.C.; Storm, R.S.; Venkateswaran, V. (Carborundum Co., Niagara Falls, NY (USA). Structural Ceramics Div.)

    1989-11-01T23:59:59.000Z

    High purity, submicron silicon carbide powders were produced via gas phase synthesis using a hydrogen/argon plasma. Two test facilities were constructed, a bench-scale unit and a larger pilot scale reactor. Three candidate silicon sources were evaluated:silicon tetrachloride (SiCl{sub 4}). dimethyldichlorosilane (CH{sub 3}){sub 2}(SiCl{sub 2}) and methyltrichlorosilane (CH{sub 3}SiCl{sub 3}). Product powders were evaluated on the basis of pressureless sinterability, surface area, agglomeration, particle size distribution, phase distribution and chemistry. Three commercial powders, Starck A10, Starck B10, and Carborundum submicron alpha silicon carbide, were also evaluated for comparison to the product powders. Powders were reproducibly synthesized at a rate of one pound per hour for standard run times of five hours. Product powders exhibited chemical and physical properties equal to or exceeding the commercial powders evaluated. In limited attempts to pressureless sinter the product powders, densities of 91% of theoretical were obtained with as-produced powder. Post-processing permitted densities in excess of 97% of theoretical. X-ray diffraction of the product indicates that the product powders are primarily beta poly-types, with traces of alpha present. Increased production rates to a target level of seven pounds per hour were not possible due to current transients produced by the pilot scale power supply. Extensive unsuccessful efforts to reduce or eliminate the transients are described. Low recovered product yields resulted from a failure of a product collection filter that was not discovered until the completion of the project.

  16. Multi-scale current activated tip-based sintering of powder-based materials

    E-Print Network [OSTI]

    El Desouky, Ahmed Mohamed

    2012-01-01T23:59:59.000Z

    Japan Society for powder Metallurgy 9 B. Srinivasaro, K. Oh-PM sintering method. Powder Metallurgy 45(4):322-328 47 Z.A.Japan Society of Powder Metallurgy 57(10): 654-659 106 M.

  17. Usage based indicators to assess the impact of scholarly works: architecture and method

    DOE Patents [OSTI]

    Bollen, Johan (Santa Fe, NM); Van De Sompel, Herbert (Santa Fe, NM)

    2012-03-13T23:59:59.000Z

    Although recording of usage data is common in scholarly information services, its exploitation for the creation of value-added services remains limited due to concerns regarding, among others, user privacy, data validity, and the lack of accepted standards for the representation, sharing and aggregation of usage data. A technical, standards-based architecture for sharing usage information is presented. In this architecture, OpenURL-compliant linking servers aggregate usage information of a specific user community as it navigates the distributed information environment that it has access to. This usage information is made OAI-PMH harvestable so that usage information exposed by many linking servers can be aggregated to facilitate the creation of value-added services with a reach beyond that of a single community or a single information service.

  18. T-1018 UCLA Spacordion Tungsten Powder Calorimeter

    SciTech Connect (OSTI)

    Trentalange, Stephen; Tsai, Oleg; Igo, George; Huang, Huan; Pan, Yu Xi; Dunkelberger, Jay; Xu, Wen Qin; /UCLA; Soha, Aria; /Fermilab; Heppelmann, Steven; /Penn State U.; Gagliardi, Carl; /Texas A-M

    2011-11-16T23:59:59.000Z

    The present experiments at the BNL-RHIC facility are evolving towards physics goals which require the detection of medium energy electromagnetic particles (photons, electrons, neutral pions, eta mesons, etc.), especially at forward angles. New detectors will place increasing demands on energy resolution, hadron rejection and two-photon resolution and will require large area, high performance electromagnetic calorimeters in a variety of geometries. In the immediate future, either RHIC or JLAB will propose a facility upgrade (Electron-Ion Collider, or EIC) with physics goals such as electron-heavy ion collisions (or p-A collisions) with a wide range of calorimeter requirements. An R and D program based at Brookhaven National Laboratory has awarded the group funding of approximately $110,000 to develop new types of calorimeters for EIC experiments. The UCLA group is developing a method to manufacture very flexible and cost-effective, yet high quality calorimeters based on scintillating fibers and tungsten powder. The design and features of the calorimeter can be briefly stated as follows: an arbitrarily large number of small diameter fibers (< 0.5 mm) are assembled as a matrix and held rigidly in place by a set of precision screens inside an empty container. The container is then back-filled with tungsten powder, compacted on a vibrating table and infused with epoxy under vacuum. The container is then removed. The resulting sub-modules are extremely uniform and achieve roughly the density of pure Lead. The sub-modules are stacked together to achieve a final detector of the desired shape. There is no dead space between sub-modules and the fibers can be in an accordion geometry bent to prevent 'channeling' of the particles due to accidental alignment of their track with the module axis. This technology has the advantage of being modular and inexpensive to the point where the construction work may be divided among groups the size of typical university physics departments. This test run if a proof-of-principle and allows the experiment to improve the design and performance of the final detectors. The experimenters have constructed prototypes of three different designs in order to investigate the characteristics of practical devices such as uniformity, linearity, longitudinal and transverse shower shapes. The first design is an array of 4 x 4 modules intended as a prototype for a practical device to be installed within two years in the STAR experimental hall. The modules are a combination of a spaghetti calorimeter and an accordion (hence 'spacordion'). Each sub-module is 1.44 cm x 1.44 cm x 15 cm and constructed individually. The second design is a prototype of 4 sub-modules constructed in one step, using a different construction technique. The third design is a set of single sub-modules each intended to test variations of the tungsten powder/embedded fiber concept by enhancing the light output/density using liquid scintillator or heavy liquids.

  19. amorphous ball-milled powders: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , and thermal properties of Nafion powders prepared by high-energy ball milling of pellets is given. Nafion powders prepared in this manner exhibit thermal behavior similar...

  20. Small file aggregation in a parallel computing system

    DOE Patents [OSTI]

    Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Grider, Gary; Zhang, Jingwang

    2014-09-02T23:59:59.000Z

    Techniques are provided for small file aggregation in a parallel computing system. An exemplary method for storing a plurality of files generated by a plurality of processes in a parallel computing system comprises aggregating the plurality of files into a single aggregated file; and generating metadata for the single aggregated file. The metadata comprises an offset and a length of each of the plurality of files in the single aggregated file. The metadata can be used to unpack one or more of the files from the single aggregated file.

  1. Table HC15.7 Air-Conditioning Usage Indicators by Four Most...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or More Units... 5.4 0.7 Q 0.5 Q Central Air-Conditioning Usage Air-Conditioned Floorspace (Square Feet)...

  2. additional county-level usage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Libraries (CUL). While Rosen, Jay 363 Mining Usage Data and Development Artifacts Olga Baysal, Reid Holmes, and Michael W. Godfrey Computer Technologies and Information...

  3. Availability, usage and expected contribution of potential nursery habitats for the California halibut

    E-Print Network [OSTI]

    Fodrie, Fredrick Joel; Mendoza, Guillermo F.

    2006-01-01T23:59:59.000Z

    of a damsel?sh re?ect availability of suitable habitat.locate/ecss Availability, usage and expected contribution ofthe spatial coverage (availability) of all potential nursery

  4. A Decision-Based Analysis of Compressed Air Usage Patterns in Automotive Manufacturing

    E-Print Network [OSTI]

    Yuan, Chris; Zhang, Teresa; Rangarajan, Arvind; Dornfeld, David; Ziemba, Bill; Whitbeck, Rod

    2006-01-01T23:59:59.000Z

    Air Usage Patterns in Automotive Manufacturing Chris Y. Yuanper vehicle built from automotive manufacturing facilities,2004). Compressed Air in Automotive Manufacturing Compressed

  5. Morphology and composition of Ni-Co electrodeposited powders

    SciTech Connect (OSTI)

    Maksimovic, V.M., E-mail: vesnam@vinca.rs [Institute of Nuclear Sciences, 'Vinca', University of Belgrade, 11001 Belgrade, P. O. Box 522 (Serbia); Lacnjevac, U.C. [Institute for Multidisciplinary research, University of Belgrade, P.O. Box 33, 11030 Belgrade (Serbia); Stoiljkovic, M.M. [Institute of Nuclear Sciences, 'Vinca', University of Belgrade, 11001 Belgrade, P. O. Box 522 (Serbia); Pavlovic, M.G. [Institute of Electrochemistry, ICTM, University of Belgrade, 11000 Belgrade, Njegoseva 12 (Serbia); Jovic, V.D. [Institute for Multidisciplinary research, University of Belgrade, P.O. Box 33, 11030 Belgrade (Serbia)

    2011-12-15T23:59:59.000Z

    The morphology, phase and chemical composition of Ni-Co alloy powders electrodeposited from an ammonium sulfate-boric acid containing electrolyte with different ratio of Ni/Co ions were investigated. The ratios of Ni/Co ions were 1/1, 1/2 and 1/3. The morphology, chemical composition and phase composition of the electrodeposited alloy powders were investigated using AES, SEM, EDS and XRD analysis. Composition of the electrolyte, i.e. the ratio of Ni/Co concentrations was found to influence both, the alloy phase composition and the morphology of Ni-Co alloy powders. At the highest ratio of Ni/Co = 1/1 concentrations typical 2D fern-like dendritic particles were obtained. With a decrease of Ni/Co ions ratio among 2D fern-like dendrites, 3D dendrites and different agglomerates were obtained. X-ray diffraction studies showed that the alloy powders mainly consisted of the face-centered cubic {alpha}-nickel phase and hexagonal close-packed {epsilon}-cobalt phase and minor proportions of face-centered cubic {alpha}-cobalt phase. The occurrence of the latter phase was observed only in the alloy powder with the higher cobalt concentration in electrolyte. The electrodeposition of Ni-Co powders occurred in an anomalous manner. - Highlights: Black-Right-Pointing-Pointer Ni-Co alloys powders were successfully electrodeposited. Black-Right-Pointing-Pointer Composition of the electrolyte (Ni/Co ions ratio) was found to influence on morphology of powders. Black-Right-Pointing-Pointer The electrodeposition of Ni-Co powders occurred in an anomalous manner.

  6. GDCT Initialization File [gdct.ini] Format Specification Guide

    E-Print Network [OSTI]

    Rosebrugh, Robert

    GDCT Initialization File [gdct.ini] Format Specification Guide Written By: Jeremy Bradbury June 22, 2000 Below is the layout of the gdct.ini file. It is important to note the following: · If the gdct.ini to represent that a file does not exist under the "Recent Files" section of the gdct.ini file. [Internal

  7. Unix/Linux Command Reference .com File Commands

    E-Print Network [OSTI]

    Reluga, Tim

    word in the current line Ctrl+U ­ erases the whole line Ctrl+R ­ type to bring up a recent commandUnix/Linux Command Reference .com File Commands ls ­ directory listing ls -al ­ formatted listing ­ output the contents of file head file ­ output the first 10 lines of file tail file ­ output the last 10

  8. Powder segregation during the filling of a simple die

    E-Print Network [OSTI]

    Lawrence, Larry Raymond

    1968-01-01T23:59:59.000Z

    POWDER SEGREGATION DURING THE FILLING OF A SIMPLE DIE A study of powder segregation during die filling with two component mixes of lead particles has shown that: I. Segregation occurs by fines filtering down through the moving powder mass. This effect... = 2000', d = 841'. Lead Particles Segregation. 6 X vs X Fines in Mixture for Zones A, 8, and C in Vertical Sampling Device. D = 2000', d = 841' . Lead Particles Maximum Segregation. -BmaxXvs D/d for Zone A of Radial Sampler. Curve 1, D = 2000@; Curve...

  9. Atomizing apparatus for making polymer and metal powders and whiskers

    DOE Patents [OSTI]

    Otaigbe, Joshua U. (Ames, IA); McAvoy, Jon M. (Moline, IL); Anderson, Iver E. (Ames, IA); Ting, Jason (Ames, IA); Mi, Jia (Pittsburgh, PA); Terpstra, Robert (Ames, IA)

    2003-03-18T23:59:59.000Z

    Method for making polymer particulates, such as spherical powder and whiskers, by melting a polymer material under conditions to avoid thermal degradation of the polymer material, atomizing the melt using gas jet means in a manner to form atomized droplets, and cooling the droplets to form polymer particulates, which are collected for further processing. Atomization parameters can be controlled to produce polymer particulates with controlled particle shape, particle size, and particle size distribution. For example, atomization parameters can be controlled to produce spherical polymer powders, polymer whiskers, and combinations of spherical powders and whiskers. Atomizing apparatus also is provided for atoomizing polymer and metallic materials.

  10. FileName//FileDate//PNNL-SA-##### DPA Calculational Methodologies Used in Fission

    E-Print Network [OSTI]

    McDonald, Kirk

    FileName//FileDate//PNNL-SA-##### DPA Calculational Methodologies Used in Fission and Fusion Reactor Materials Applications David Wootan - david.wootan@pnnl.gov, 1-509-372-6865 Radiation Damage

  11. Saving Output to a File (Using Codeblocks or Dev-C++) Saving Your Output to a File

    E-Print Network [OSTI]

    Sokol, Dina

    Saving Output to a File (Using Codeblocks or Dev-C++) Saving Your Output to a File To save | New | Source File. d. In the new window, right-click and select Paste. e. Then select "File | Save as" to save and name the file. i. In the window that pops up, the bottom fill-in box is labelled "Save as type

  12. Reading File Bonneville Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising funds forAdvancedAdvancedReading File

  13. Characterization of Cu{sub 6}Sn{sub 5} intermetallic powders produced by water atomization and powder heat treatment

    SciTech Connect (OSTI)

    Tongsri, Ruangdaj, E-mail: ruangdt@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Yotkaew, Thanyaporn, E-mail: thanyy@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Krataitong, Rungtip, E-mail: rungtipk@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Wila, Pongsak, E-mail: pongsakw@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Sir-on, Autcharaporn, E-mail: autchars@mtec.or.th [Materials Characterization Research Unit (MCRU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Muthitamongkol, Pennapa, E-mail: pennapm@mtec.or.th [Materials Characterization Research Unit (MCRU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Tosangthum, Nattaya, E-mail: nattayt@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand)

    2013-12-15T23:59:59.000Z

    Since the Cu{sub 6}Sn{sub 5} intermetallic shows its importance in industrial applications, the Cu{sub 6}Sn{sub 5} intermetallic-containing powders, produced by a powder processing route with a high production rate, were characterized. The route consisted of water atomization of an alloy melt (Cu–61 wt.% Sn) and subsequent heat treatment of the water-atomized powders. Characterization of the water-atomized powders and their heated forms was conducted by using X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Fine water-atomized powder microstructures consisted of primary hexagonal ?-Cu{sub 6.25}Sn{sub 5} dendrites coexisting with interdendritic ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic. Solidification of fine melt droplets was governed by surface nucleation and growth of the primary hexagonal ?-Cu{sub 6.25}Sn{sub 5} dendrites followed by ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic solidification of the remnant liquid. In coarse melt droplets, nucleation and growth of primary ?-Cu{sub 3}Sn dendrites were followed by peritectic reaction (?-Cu{sub 3}Sn + liquid ? ?-Cu{sub 6.25}Sn{sub 5}) or direct crystallization of ?-Cu{sub 6.25}Sn{sub 5} phase from the undercooled melt. Finally, the ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic solidification of the remnant liquid occurred. Heating of the water-atomized powders at different temperatures resulted in microstructural homogenization. The water-atomized powders with mixed phases were transformed to powders with single monoclinic ?-Cu{sub 6}Sn{sub 5} phase. - Highlights: • The Cu{sub 6}Sn{sub 5} intermetallic powder production route was proposed. • Single phase Cu{sub 6}Sn{sub 5} powders could be by water atomization and heating. • Water-atomized Cu–Sn powders contained mixed Cu–Sn phases. • Solidification and heat treatment of water-atomized Cu–Sn powders are explained.

  14. au powder surfaces: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    It is known that Si3N4 powders are susceptible to oxidation when contacted with oxygen or water vapor on storage and processing. Danforth 5 detected a remarkable increase...

  15. Process for synthesizing compounds from elemental powders and product

    DOE Patents [OSTI]

    Rabin, B.H.; Wright, R.N.

    1993-12-14T23:59:59.000Z

    A process for synthesizing intermetallic compounds from elemental powders is described. The elemental powders are initially combined in a ratio which approximates the stoichiometric composition of the intermetallic compound. The mixed powders are then formed into a compact which is heat treated at a controlled rate of heating such that an exothermic reaction between the elements is initiated. The heat treatment may be performed under controlled conditions ranging from a vacuum (pressureless sintering) to compression (hot pressing) to produce a desired densification of the intermetallic compound. In a preferred form of the invention, elemental powders of Fe and Al are combined to form aluminide compounds of Fe[sub 3] Al and FeAl. 25 figures.

  16. aluminum powder part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

  17. aluminum garnet powders: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

  18. aluminum powder mixtures: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

  19. aluminum germanium powders: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

  20. Environmentally stable reactive alloy powders and method of making same

    DOE Patents [OSTI]

    Anderson, I.E.; Lograsso, B.K.; Terpstra, R.L.

    1998-09-22T23:59:59.000Z

    Apparatus and method are disclosed for making powder from a metallic melt by atomizing the melt to form droplets and reacting the droplets downstream of the atomizing location with a reactive gas. The droplets are reacted with the gas at a temperature where a solidified exterior surface is formed thereon and where a protective refractory barrier layer (reaction layer) is formed whose penetration into the droplets is limited by the presence of the solidified surface so as to avoid selective reduction of key reactive alloys needed to achieve desired powder end use properties. The barrier layer protects the reactive powder particles from environmental constituents such as air and water in the liquid or vapor form during subsequent fabrication of the powder to end-use shapes and during use in the intended service environment. 7 figs.

  1. Stabilized Lithium Metal Powder, Enabling Material and Revolutionary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -- Washington D.C. es011yakovleva2010o.pdf More Documents & Publications Stabilized Lithium Metal Powder, Enabling Material and Revolutionary Technology for High Energy Li-ion...

  2. Apparatus for making environmentally stable reactive alloy powders

    DOE Patents [OSTI]

    Anderson, I.E.; Lograsso, B.K.; Terpstra, R.L.

    1996-12-31T23:59:59.000Z

    Apparatus and method are disclosed for making powder from a metallic melt by atomizing the melt to form droplets and reacting the droplets downstream of the atomizing location with a reactive gas. The droplets are reacted with the gas at a temperature where a solidified exterior surface is formed thereon and where a protective refractory barrier layer (reaction layer) is formed whose penetration into the droplets is limited by the presence of the solidified surface so as to avoid selective reduction of key reactive alloyants needed to achieve desired powder end use properties. The barrier layer protects the reactive powder particles from environmental constituents such as air and water in the liquid or vapor form during subsequent fabrication of the powder to end-use shapes and during use in the intended service environment. 7 figs.

  3. alloyed powders kermetnye: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  4. alloy powder fabricated: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  5. alloy powders produced: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  6. alloy powders obtained: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  7. alloyed powders hyperfine: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  8. alloy powder prepared: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  9. Compacting Plastic-Bonded Explosive Molding Powders to Dense Solids

    SciTech Connect (OSTI)

    B. Olinger

    2005-04-15T23:59:59.000Z

    Dense solid high explosives are made by compacting plastic-bonded explosive molding powders with high pressures and temperatures for extended periods of time. The density is influenced by manufacturing processes of the powders, compaction temperature, the magnitude of compaction pressure, pressure duration, and number of repeated applications of pressure. The internal density variation of compacted explosives depends on method of compaction and the material being compacted.

  10. Method for removing oxide contamination from titanium diboride powder

    DOE Patents [OSTI]

    Brynestad, Jorulf (Oak Ridge, TN); Bamberger, Carlos E. (Oak Ridge, TN)

    1984-01-01T23:59:59.000Z

    A method for removing oxide contamination from titanium diboride powder involves the direct chemical treatment of TiB.sub.2 powders with a gaseous boron halide, such as BCl.sub.3, at temperatures in the range of 500.degree.-800.degree. C. The BCl.sub.3 reacts with the oxides to form volatile species which are removed by the BCl.sub.3 exit stream.

  11. Neutron detectors comprising ultra-thin layers of boron powder

    DOE Patents [OSTI]

    Wang, Zhehul; Morris, Christopher

    2013-07-23T23:59:59.000Z

    High-efficiency neutron detector substrate assemblies comprising a first conductive substrate, wherein a first side of the substrate is in direct contact with a first layer of a powder material having a thickness of from about 50 nm to about 250 nm and comprising .sup.10boron, .sup.10boron carbide or combinations thereof, and wherein a conductive material is in proximity to the first layer of powder material; and processes of making said neutron detector substrate assemblies.

  12. Titanium Metal Powder Production by the Plasma Quench Process

    SciTech Connect (OSTI)

    R. A. Cordes; A. Donaldson

    2000-09-01T23:59:59.000Z

    The goals of this project included the scale-up of the titanium hydride production process to a production rate of 50 kg/hr at a purity level of 99+%. This goal was to be achieved by incrementally increasing the production capability of a series of reactor systems. This methodic approach was designed to allow Idaho Titanium Technologies to systematically address the engineering issues associated with plasma system performance, and powder collection system design and performance. With quality powder available, actual fabrication with the titanium hydride was to be pursued. Finally, with a successful titanium production system in place, the production of titanium aluminide was to be pursued by the simultaneously injection of titanium and aluminum precursors into the reactor system. Some significant accomplishments of the project are: A unique and revolutionary torch/reactor capable of withstanding temperatures up to 5000 C with high thermal efficiency has been operated. The dissociation of titanium tetrachloride into titanium powder and HC1 has been demonstrated, and a one-megawatt reactor potentially capable of producing 100 pounds per hour has been built, but not yet operated at the powder level. The removal of residual subchlorides and adsorbed HC1 and the sintering of powder to form solid bodies have been demonstrated. The production system has been operated at production rates up to 40 pounds per hour. Subsequent to the end of the project, Idaho Titanium Technologies demonstrated that titanium hydride powder can indeed be sintered into solid titanium metal at 1500 C without sintering aids.

  13. Stability of captopril in powder papers under three storage conditions

    SciTech Connect (OSTI)

    Taketomo, C.K.; Chu, S.A.; Cheng, M.H.; Corpuz, R.P. (Childrens Hospital, Los Angeles, CA (USA))

    1990-08-01T23:59:59.000Z

    The stability of captopril in powder papers under three different storage conditions was determined. Captopril 12.5-mg tablets were triturated with lactose to a final concentration of 2 mg of captopril in 100 mg of powder. A total of 240 powder papers were prepared and stored in class A prescription vials (80 papers), 002G plastic zip-lock bags (80 papers), and Moisture Proof Barrier Bags (80 papers). Immediately after preparation and at 1, 2, 3, 4, 8, 12, and 24 weeks of storage at room temperature, powder papers under each storage condition were reweighed and the contents were assayed for captopril concentration by a stability-indicating high-performance liquid chromatographic method. More than 90% of the initial captopril concentration was retained under all storage conditions during the first 12 weeks of the study. Captopril disulfide, a degradation product, was detected in one sample stored in a plastic zip-lock bag at 24 weeks. Captopril was stable for the entire 24-week period in powder papers stored in either the class A prescription vial or the Moisture Proof Barrier Bag. Captopril in powder papers is stable for at least 12 weeks when stored at room temperature under all three storage conditions.

  14. Scholarly E-Book Use across Disciplines: Content Analysis of Usage Reports and Search Terms

    E-Print Network [OSTI]

    Rosen, Jay

    community. In response to this demand, Columbia University Libraries (CUL) #12;2 | B a k k a l b a s i & G o the aggregate results indicate that e-book use continues to increase, usage rates are not uniform across the aggregate results indicate that e-book use continues to increase, usage rates are not uniform across

  15. A Model-Based Approach to Synthesizing Insulin Infusion Pump Usage Parameters for Diabetic Patients

    E-Print Network [OSTI]

    Sankaranarayanan, Sriram

    A Model-Based Approach to Synthesizing Insulin Infusion Pump Usage Parameters for Diabetic Patients Fainekos Abstract-- We present a model-based approach to synthesiz- ing insulin infusion pump usage parameters against varying meal scenarios and physiological conditions. Insulin infusion pumps are commonly

  16. A taxonomy of virtual worlds usage in education Ishbel Duncan, Alan Miller and Shangyi Jiang

    E-Print Network [OSTI]

    St Andrews, University of

    1 A taxonomy of virtual worlds usage in education Ishbel Duncan, Alan Miller and Shangyi Jiang from around the world. A taxonomy is then derived from these articles, delineating current theoretical and practical work on Virtual World usage, specifically in the field of education. The taxonomy identifies rich

  17. Characterizing Geospatial Dynamics of Application Usage in a 3G Cellular Data Network

    E-Print Network [OSTI]

    Fisher, Kathleen

    Characterizing Geospatial Dynamics of Application Usage in a 3G Cellular Data Network M. Zubair provided the evidence that significant geospatial correla- tions, in terms of traffic volume and application access, exist in cellular network usage. Such geospatial correlation patterns provide local

  18. The User Side of Sustainability: Modeling Behavior and Energy Usage in the Home

    E-Print Network [OSTI]

    Cook, Diane J.

    The User Side of Sustainability: Modeling Behavior and Energy Usage in the Home Chao Chena, , Diane in everyday home environments to examine the relationship between behavioral patterns and energy consumption;technologies that examine energy usage in homes and to encourage energy effi- cient behaviors, in addition

  19. Clustering Educational Digital Library Usage Data: A Comparison of Latent Class Analysis and

    E-Print Network [OSTI]

    Qi, Xiaojun

    Clustering Educational Digital Library Usage Data: A Comparison of Latent Class Analysis and K-Means Analysis is superior to K-means on all three comparisons. In particular, LCA is more immune to the variance, the widely used K-means and the model-based Latent Class Analysis, are compared, using usage data from

  20. Web Usage Mining as a Tool for Personalization: a survey D. Pierrakos+

    E-Print Network [OSTI]

    Paliouras, George

    1 Web Usage Mining as a Tool for Personalization: a survey D. Pierrakos+ , G. Paliouras+ , C GREECE Abstract: This paper is a survey of recent work in the field of Web Usage Mining for the benefit of research on the personalization of Web-based information services. The essence of personalization

  1. Water usage dropping on campus, but UT hopes to lower it more

    E-Print Network [OSTI]

    Johnston, Daniel

    Water usage dropping on campus, but UT hopes to lower it more Photo Credit: Zachary Strain | Daily six years, UT has worked to decrease its water usage, but the University still has a ways to go if it the University was using one billion gallons of water per year. Across buildings, irrigation, chilling stations

  2. The Comparison of Usage and Availability Measurements for Evaluating Resource Douglas H. Johnson

    E-Print Network [OSTI]

    Steury, Todd D.

    The Comparison of Usage and Availability Measurements for Evaluating Resource Preference Douglas H and Conditions of Use, available at http://www.jstor.org/about/terms.html. JSTOR's Terms and Conditions of Use~etyof Amenca THE COMPARISON OF USAGE AND AVAILABILITY MEASUREMENTS FOR EVALUATING RESOURCE PREFERENCE1

  3. Modeling the Performance and the Energy Usage of Wireless Sensor Networks by Retrial Queueing Systems

    E-Print Network [OSTI]

    Sztrik, János

    Modeling the Performance and the Energy Usage of Wireless Sensor Networks by Retrial Queueing and the energy usage of the sensor network. Two operations are compared. In the first case only the event driven requests can initiate reaching the radio trans- mission (RF) unit. Time driven requests have to wait

  4. Usage Patterns of the Java Standard API Homan Ma, Robert Amor, Ewan Tempero

    E-Print Network [OSTI]

    Amor, Robert

    Usage Patterns of the Java Standard API Homan Ma, Robert Amor, Ewan Tempero Department of Computer,ewan}@cs.auckland.ac.nz Abstract The Java Standard API has grown enormously since Java's be- ginnings, now consisting of over 3 to help determine the "typical" usage of the Standard API. We find that, in an extensive corpus of open

  5. Usage Management in Cloud Computing Pramod A. Jamkhedkar, Christopher C. Lamb, Gregory L. Heileman

    E-Print Network [OSTI]

    Heileman, Gregory L.

    Usage Management in Cloud Computing Pramod A. Jamkhedkar, Christopher C. Lamb, Gregory L. Heileman will gain increasing importance as cloud computing becomes more pervasive. Existing service level agreement. This paper introduces the notion and importance of usage management in cloud computing. It provides

  6. A Look At Steam Usage in William's Athletic Facilities Patrick Morrissey

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    A Look At Steam Usage in William's Athletic Facilities Patrick Morrissey Geosciences 206 Final Project Professor Dethier May 18, 2010 #12;Introduction: This paper will examine steam usage trends that Towne FH and Lansing Chapman both draw their steam from an enclosed loop heating system.23

  7. Instructions for transmitting Collector files to KFS In order for a department's KFS Collector file to be processed, departments must transfer the file to an

    E-Print Network [OSTI]

    Stephens, Graeme L.

    Instructions for transmitting Collector files to KFS In order for a department's KFS Collector file. The name of the KFS Collector file transferred to the Information Systems server by each department should in .xml. Once a department's Collector file has been processed by KFS it will be removed from

  8. In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy q

    E-Print Network [OSTI]

    Zheng, Yufeng

    In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy q Y Biodegradation Cytotoxicity Powder metallurgy a b s t r a c t Mg/Ca (1 wt.%, 5 wt.%, 10 wt.% Ca) composites were prepared from pure magnesium and calcium powders using the powder metallurgy method, aiming to enlarge

  9. NERSC Online Training May 3: Navigating NERSC File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Training May 3: Navigating NERSC File Systems NERSC Online Training May 3: Navigating NERSC File Systems April 26, 2011 by Richard Gerber A NERSC training event, "Navigating...

  10. DOE Successfully Resolves Three Enforcement Cases and Files Yet...

    Office of Environmental Management (EM)

    Successfully Resolves Three Enforcement Cases and Files Yet Another DOE Successfully Resolves Three Enforcement Cases and Files Yet Another September 29, 2010 - 5:24pm Addthis The...

  11. File:Notice of Termination for Authorization under TPDES General...

    Open Energy Info (EERE)

    | Sign Up Search File Edit History Facebook icon Twitter icon File:Notice of Termination for Authorization under TPDES General Permit TXR150000.pdf Jump to: navigation,...

  12. Direct laser powder deposition - 'State of the Art'

    SciTech Connect (OSTI)

    Sears, J.W.

    1999-11-01T23:59:59.000Z

    Recent developments on Laser Cladding and Rapid Prototyping have led to Solid Freeform Fabrication (SFF) technologies that produce net shape metal components by laser fusion of metal powder alloys. These processes are known by various names such as Directed Light Fabrication (DLF{trademark}), Laser Engineered Net Shaping (LENS{trademark}), and Direct Metal Deposition (DMD{trademark}) to name a few. These types of processes can be referred to as direct laser powder deposition (DLPD). DLPD involves fusing metal alloy powders in the focal point of a laser (or lasers) that is (are) being controlled by Computer Aided Design-Computer Aided Manufacturing (CAD-CAM) technology. DLPD technology has the capability to produce fully dense components with little need for subsequent processing. Research and development of DLPD is being conducted throughout the world. The list of facilities conducting work in this area continues to grow (over 25 identified in North America alone). Selective Laser Sintering (SLS{trademark}) is another type of SFF technology based on laser fusion of powder. The SLS technology was developed as a rapid prototyping technique, whereas DLPD is an extension of the laser cladding technology. Most of the effort in SLS has been directed towards plastics and ceramics. In SLS, the powder is pre-placed by rolling out a layer for each laser pass. The computer control selects where in the layer the powder will be sintered by the laser. Sequential layers are sintered similarly forming a shape. In DLPD, powder is fed directly into a molten metal pool formed at the focal point of the laser where it is melted. As the laser moves on the material it rapidly resolidifies to form a shape. This talk elaborates on the state of these developments.

  13. UBC Subject File Collection / UBC Archives (collector)

    E-Print Network [OSTI]

    Handy, Todd C.

    UBC Subject File Collection / UBC Archives (collector) Compiled by Max Steiner (2005) Revised Description o Title / Dates of Creation / Physical Description o Collector's Biographical Sketch o Scope Files Collection / UBC Archives (collector). ­ 1915-2000. 10.8 m of textual materials. Collector

  14. Contributing Storage using the Transparent File System

    E-Print Network [OSTI]

    Berger, Emery

    Contributing Storage using the Transparent File System JAMES CIPAR and MARK D. CORNER and EMERY D barrier to the adoption of contributory storage systems is that contributing a large quantity of local--all of the currently available space-- without impacting the performance of ordinary file access operations. We show

  15. Common File Formats in Rosetta Steven Combs

    E-Print Network [OSTI]

    Meiler, Jens

    different ways Command Line Fixbb.release ­database -s 1thfD.pdb ­ex1 ­ex2 ­packing.942 19.190 1.00 8.50 P Ligand lines Atom # Atom name Residue name Chain ID Residue # Xcoord Ycoord Zcoord occupancy Bfactor Element name Atom lines #12;Silent Files · Specify by ­in:file:silent and ­ out

  16. TO: FILE FROM: I SUBJECT:

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj: ;;I : T'ncZl' lO--23,TO: FILE

  17. Isothermal nitridation kinetics of TiSi{sub 2} powders

    SciTech Connect (OSTI)

    Roger, J., E-mail: roger@lcts.u-bordeaux1.fr; Maillé, L.; Dourges, M.A.

    2014-04-01T23:59:59.000Z

    The aim of the present work is to determine the kinetics of reaction between TiSi{sub 2} powder and gaseous nitrogen. Isothermal nitridation of TiSi{sub 2} powders with fine (1.4 µm) and medium (4.5 µm) particle size has been studied in pure nitrogen atmosphere from 1000 to 1200 °C for duration up to 50 h. The isothermal nitridation kinetics of TiSi{sub 2} powders were investigated by thermogravimetry. The nitridation rate strongly depends on the particle size and temperature. Smaller size particle exhibits higher nitridation rate due to its larger surface area. The conversion process is complex with nucleation and growth of TiN at the surface of the grain and Si{sub 3}N{sub 4} inside the grain promoted by the Kirkendall effect with an influence of the volume increase. - Graphical abstract: Backscattered electrons image of a transverse TiSi{sub 2} grain nitrurated at 1100 °C for 50 h. - Highlights: • Influence of grain size on TiSi{sub 2} powder nitridation. • Influence of temperature on TiSi{sub 2} powder nitridation. • Experimental measurements of the nitridation kinetics. • An explanation of the nitridation mechanism.

  18. Method for producing microcomposite powders using a soap solution

    DOE Patents [OSTI]

    Maginnis, Michael A. (Coker, AL); Robinson, David A. (Mobile, AL)

    1996-01-01T23:59:59.000Z

    A method for producing microcomposite powders for use in superconducting and non-superconducting applications. A particular method to produce microcomposite powders for use in superconducting applications includes the steps of: (a) preparing a solution including ammonium soap; (b) dissolving a preselected amount of a soluble metallic such as silver nitrate in the solution including ammonium soap to form a first solution; (c) adding a primary phase material such as a single phase YBC superconducting material in particle form to the first solution; (d) preparing a second solution formed from a mixture of a weak acid and an alkyl-mono-ether; (e) adding the second solution to the first solution to form a resultant mixture; (f) allowing the resultant mixture to set until the resultant mixture begins to cloud and thicken into a gel precipitating around individual particles of the primary phase material; (g) thereafter drying the resultant mixture to form a YBC superconducting material/silver nitrate precursor powder; and (h) calcining the YBC superconducting material/silver nitrate precursor powder to convert the silver nitrate to silver and thereby form a YBC/silver microcomposite powder wherein the silver is substantially uniformly dispersed in the matrix of the YBC material.

  19. Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored

    E-Print Network [OSTI]

    Greenberg, Saul

    Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored auras. Red is high usage while green is low usage. HomeWindow: An Augmented Reality Domestic that reflects its current and historical energy use. Categories and Subject Descriptors H.5.2 [Information

  20. Woodfuel Usage Update 1 I Wood fuel use in Scotland 2011 I Hudson Consulting I September 2011

    E-Print Network [OSTI]

    energy sectors of the Scottish market) to 30 December 2010. The information gained from the study is usedWoodfuel Usage Update 1 I Wood fuel use in Scotland 2011 I Hudson Consulting I September 2011 Woodfuel Demand and Usage in Scotland Report 2011 #12;Woodfuel Usage Update 2 I Wood fuel use in Scotland

  1. Aerosol flow reactor production of superconducting ceramic powder

    SciTech Connect (OSTI)

    Kodas, T. (New Mexico Univ., Albuquerque, NM (USA). Dept. of Nuclear Engineering); Engler, E.; Lee, V.; Parkin, L.S. (Research Div., Almaden Research Center, San Jose, CA (US))

    1988-01-01T23:59:59.000Z

    Potential applications and basic studies of superconducting ceramics require the reproducible production of chemically homogeneous, ultrapure powders with controlled particle size distributions. Previous work has mainly examined the use of liquid and solid phase methods for superconducting powder production. In this work, it is shown that carbon-free, submicron powders based on the Y-Ba-Cu-O, La-Sr-Cu-O, Bi-Ca-Sr-Cu-O and Tl-Ca-Ba-Cu-O systems can be produced in a gaseous flow system by reacting aerosol particles containing the nitrate salts of the appropriate metals in flowing oxygen at temperatures of 900 - 1100C. It is also demonstrated that composite Cu/YBa/sub 2/Cu/sub 3/O/sub 7/ wires can be fabricated by thermophoretic deposition of the particles onto the inner surface of a Cu tube hby sintering/annealing.

  2. A simple procedure to prepare spherical {alpha}-alumina powders

    SciTech Connect (OSTI)

    Liu Hongyu [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China); Ning Guiling [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)], E-mail: ninggl@dlut.edu.cn; Gan Zhihong; Lin Yuan [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)

    2009-04-02T23:59:59.000Z

    Spherical {alpha}-alumina powders were prepared by the controlled hydrolysis of aluminum isopropoxide in a hydrolysis system consisting of octanol and acetonitrile. Diverse solvents to dissolve reactant formed diverse hydrolysis systems and affected particle shape of {alpha}-alumina powders. The precursors crystallized to {gamma}-alumina at 1000 deg. C and converted to {alpha}-alumina at 1150 deg. C without intermediate phases. The particle morphology of precursor was retained after it crystallized to {alpha}-alumina. The heating rate influenced the particle shape and the state of agglomeration during calcination process. The thermal properties of the precursors were characterized by thermal gravimetric and differential thermal analysis. X-ray diffraction technique was used to confirm the conversion of crystalline phase of alumina powders from amorphous to {alpha}-phase. Transmission electron microscopy was used to investigate the morphologies and size of the precursors and products.

  3. An Analysis of Web File Sizes: New Methods and Models

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    An Analysis of Web File Sizes: New Methods and Models A Thesis presented by Brent Tworetzky consider such models and how to improve their fits. This thesis contributes to file size research-improved file size estimations over type-blind models. We therefore present a range of useful new file size

  4. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. If youEIA-906 & EIA-920,Condensate,Electric Power

  5. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. If youEIA-906 & EIA-920,Condensate,Electric PowerElectric

  6. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. If youEIA-906 & EIA-920,Condensate,Electric

  7. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. If youEIA-906 &

  8. FILE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling CorpNew 1325.8.Enaineer;/:4,4 (;%hEROF'

  9. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. DepartmentOregon826Industrial Plants Excluding

  10. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. DepartmentOregon826Industrial Plants ExcludingCoke

  11. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. DepartmentOregon826Industrial Plants

  12. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. DepartmentOregon826Industrial

  13. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S.

  14. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S.3,"Alabama","Alabama","Electric Power

  15. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S.3,"Alabama","Alabama","Electric

  16. File

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1

  17. Nano powders, components and coatings by plasma technique

    DOE Patents [OSTI]

    McKechnie, Timothy N. (Brownsboro, AL); Antony, Leo V. M. (Huntsville, AL); O'Dell, Scott (Arab, AL); Power, Chris (Guntersville, AL); Tabor, Terry (Huntsville, AL)

    2009-11-10T23:59:59.000Z

    Ultra fine and nanometer powders and a method of producing same are provided, preferably refractory metal and ceramic nanopowders. When certain precursors are injected into the plasma flame in a reactor chamber, the materials are heated, melted and vaporized and the chemical reaction is induced in the vapor phase. The vapor phase is quenched rapidly to solid phase to yield the ultra pure, ultra fine and nano product. With this technique, powders have been made 20 nanometers in size in a system capable of a bulk production rate of more than 10 lbs/hr. The process is particularly applicable to tungsten, molybdenum, rhenium, tungsten carbide, molybdenum carbide and other related materials.

  18. Process for preparing fine grain titanium carbide powder

    DOE Patents [OSTI]

    Janney, M.A.

    1985-03-12T23:59:59.000Z

    A method for preparing finely divided titanium carbide powder in which an organotitanate is reacted with a carbon precursor polymer to provide an admixture of the titanium and the polymer at a molecular level due to a crosslinking reaction between the organotitanate and the polymer. The resulting gel is dried, pyrolyzed to drive off volatile components and provide carbon. The resulting solids are then heated at an elevated temperature to convert the titanium and carbon to high-purity titanium carbide powder in a submicron size range.

  19. Method for forming biaxially textured articles by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN); Kroeger, Donald M. (Knoxville, TN)

    2002-01-01T23:59:59.000Z

    A method of preparing a biaxially textured alloy article comprises the steps of preparing a mixture comprising Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacting the mixture, followed by heat treating and rapidly recrystallizing to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

  20. HIV Co-receptor Usage in HIV-related Non-Hodgkin's Lymphoma

    E-Print Network [OSTI]

    Reid, Erin; Morris, Sheldon R

    2012-01-01T23:59:59.000Z

    receptor usage, CCR5 CXCR4, SDF-1 Introduction Highly activewith SNP analysis for the SDF 1-3’A polymorphism (Appliedsamples were testing for the SDF polymorphism and four were

  1. PERSPECTIVES AND USAGE OF TECHNOLOGY OF ARABIC LANGUAGE TEACHERS IN THE UNITED ARAB EMIRATES

    E-Print Network [OSTI]

    ALhumaid, Khadija Farhan

    2014-05-31T23:59:59.000Z

    Abstract This study examined the perspectives and usage of technology by Arabic language teachers' in various schools all across The United Arab Emirates. Barriers to integrating technology were closely examined. Dimensions investigated included...

  2. "Table HC8.5 Space Heating Usage Indicators by Urban/Rural Location...

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by UrbanRural Location, 2005" " Million U.S. Housing Units" ,,"UrbanRural Location (as Self-Reported)" ,"Housing Units (millions)" "Space Heating...

  3. "Table HC9.5 Space Heating Usage Indicators by Climate Zone...

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000...

  4. "Table HC4.5 Space Heating Usage Indicators by Renter-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing...

  5. "Table HC3.5 Space Heating Usage Indicators by Owner-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing...

  6. Commercial Building Tenant Energy Usage Data Aggregation and Privacy: Technical Appendix

    SciTech Connect (OSTI)

    Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.

    2014-11-12T23:59:59.000Z

    This technical appendix accompanies report PNNL–23786 “Commercial Building Tenant Energy Usage Data Aggregation and Privacy”. The objective is to provide background information on the methods utilized in the statistical analysis of the aggregation thresholds.

  7. "Table HC9.10 Home Appliances Usage Indicators by Climate Zone...

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000...

  8. "Table HC15.13 Lighting Usage Indicators by Four Most Populated...

    U.S. Energy Information Administration (EIA) Indexed Site

    Units (millions)","Four Most Populated States" "Lighting Usage Indicators",,"New York","Florida","Texas","California" "Total U.S. Housing Units",111.1,7.1,7,8,12.1 "Indoor...

  9. RECS Fuel Oil Usage Form_v1 (Draft).xps

    U.S. Energy Information Administration (EIA) Indexed Site

    fuel oil usage for this delivery address between September 2008 and April 2010. Delivery Number Enter the Delivery Date for each delivery 1 2 3 4 5 6 7 8 9 10 Enter the Total...

  10. Improvements to building energy usage modeling during early design stages and retrofits

    E-Print Network [OSTI]

    Mandelbaum, Andrew (Andrew Joseph)

    2014-01-01T23:59:59.000Z

    A variety of improvements to the MIT Design Advisor, a whole-building energy usage modeling tool intended for use during early design stages, are investigated. These include changes to the thermal mass temperature distribution ...

  11. File storage and I/O

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget »Travel andFifth Annual RadWasteFileFileFileO

  12. AN INVESTIGATION OF HYDROSTATIC EXTRUSION AND OTHER DEFORMATION MODES FOR THE FABRICATION OF MULTI-FILAMENTARY NIOBIUM-TIN SUPERCONDUCTORS BY A POWDER METALLURGY APPROACH

    E-Print Network [OSTI]

    MacLeod, G.E.

    2010-01-01T23:59:59.000Z

    SUPERCONDUCTORS BY A POWDER METALLURGY ApPROACH By GLEN EARLTin Superconductors by a Powder Metallurgy Approach TABLE OFSUPERCONDUCTORS BY A POWDER METALLURGY APPROACH Glen Earl

  13. Combustion synthesis and quasi-isostatic densication of powder cermets

    E-Print Network [OSTI]

    Meyers, Marc A.

    Combustion synthesis and quasi-isostatic densi®cation of powder cermets E.A. Olevskya,* , E-propagating High-temperature synthesis (also known as SHS or combustion synthesis) presents a bright potential equation parameters. The distortion undergone by the combustion synthesis products during QIP densi

  14. Mechanical Properties of a Metal Powder-Loaded Polyurethane Foam

    SciTech Connect (OSTI)

    C. L. Neuschwanger; L. L. Whinnery; S. H. Goods

    1999-04-01T23:59:59.000Z

    Quasi-static compression tests have been performed on polyurethane foam specimens. The modulus of the foam exhibited a power-law dependence with respect to density of the form: E* {proportional_to} {rho}*{sup n}, where n = 1.7. The modulus data is well described by a simple geometric model (attributed to the work of Gibson and Ashby) for closed-cell foam in which the stiffness of the foam is governed by the flexure of the cell struts and cell walls. The compressive strength of the foam is also found to follow a power-law behavior with respect to foam density. In this instance, Euler buckling is used to rationalize the density dependence. The modulus of the polyurethane foam was modified by addition of a gas atomized, spherical aluminum powder. Additions of 30 and 50 weight percent of the powder significantly increased the foam modulus. However, there were only slight increases in modulus with 5 and 10 weight percent additions of the metal powder. Strength was also slightly increased at high loading fractions of powder. This increase in modulus and strength could be predicted by combining the above geometric model with a well-known model describing the effect on modulus of a rigid dispersoid in a compliant matrix.

  15. Explosively driven low-density foams and powders

    DOE Patents [OSTI]

    Viecelli, James A. (Orinda, CA); Wood, Lowell L. (Simi Valley, CA); Ishikawa, Muriel Y. (Livermore, CA); Nuckolls, John H. (Danville, CA); Pagoria, Phillip F. (Livermore, CA)

    2010-05-04T23:59:59.000Z

    Hollow RX-08HD cylindrical charges were loaded with boron and PTFE, in the form of low-bulk density powders or powders dispersed in a rigid foam matrix. Each charge was initiated by a Comp B booster at one end, producing a detonation wave propagating down the length of the cylinder, crushing the foam or bulk powder and collapsing the void spaces. The PdV work done in crushing the material heated it to high temperatures, expelling it in a high velocity fluid jet. In the case of boron particles supported in foam, framing camera photos, temperature measurements, and aluminum witness plates suggest that the boron was completely vaporized by the crush wave and that the boron vapor turbulently mixed with and burned in the surrounding air. In the case of PTFE powder, X-ray photoelectron spectroscopy of residues recovered from fragments of a granite target slab suggest that heating was sufficient to dissociate the PTFE to carbon vapor and molecular fluorine which reacted with the quartz and aluminum silicates in the granite to form aluminum oxide and mineral fluoride compounds.

  16. Geothermal resources of the Southern Powder River Basin, Wyoming

    SciTech Connect (OSTI)

    Heasler, H.P.; Buelow, K.L.; Hinckley, B.S.

    1985-06-13T23:59:59.000Z

    This report describes the geothermal resources of the Southern Powder River Basin. The report contains a discussion of the hydrology as it relates to the movement of heated water, a description and interpretation of the thermal regime, and four maps: a generalized geological map, a structure contour map, a thermal gradient contour map, and a ground water temperature map. 10 figs. (ACR)

  17. Oxide Dispersion Strengthened Iron Aluminide by CVD Coated Powders

    SciTech Connect (OSTI)

    Asit Biswas Andrew J. Sherman

    2006-09-25T23:59:59.000Z

    This I &I Category2 program developed chemical vapor deposition (CVD) of iron, aluminum and aluminum oxide coated iron powders and the availability of high temperature oxidation, corrosion and erosion resistant coating for future power generation equipment and can be used for retrofitting existing fossil-fired power plant equipment. This coating will provide enhanced life and performance of Coal-Fired Boilers components such as fire side corrosion on the outer diameter (OD) of the water wall and superheater tubing as well as on the inner diameter (ID) and OD of larger diameter headers. The program also developed a manufacturing route for readily available thermal spray powders for iron aluminide coating and fabrication of net shape component by powder metallurgy route using this CVD coated powders. This coating can also be applid on jet engine compressor blade and housing, industrial heat treating furnace fixtures, magnetic electronic parts, heating element, piping and tubing for fossil energy application and automotive application, chemical processing equipment , heat exchanger, and structural member of aircraft. The program also resulted in developing a new fabrication route of thermal spray coating and oxide dispersion strengthened (ODS) iron aluminide composites enabling more precise control over material microstructures.

  18. Development and Testing of a BI-2212 Textured Powder Conductor 

    E-Print Network [OSTI]

    Damborsky, Kyle

    2014-03-10T23:59:59.000Z

    to ascertain the quality of the products. The third and final thrust was the development of a non-melt heat treatment that was shown to grow grains of Bi-2212 powder and densify composites. Measurements of the transport critical currents for the heat treated...

  19. INFLUENCE OF TORREFACTION TREATMENT ON WOOD POWDER PROPERTIES M. Almendrosa

    E-Print Network [OSTI]

    Boyer, Edmond

    INFLUENCE OF TORREFACTION TREATMENT ON WOOD POWDER PROPERTIES M. Almendrosa , O. Bonnefoyb , A de Saint-Etienne (EMSE), 158, Cours Fauriel, F-42023 Saint-Etienne, France ABSTRACT: Torrefaction and makes the grinding easier. Our project deals with the study of the effects of the combined torrefaction

  20. Argonne integrated heterogeneous file transfer network

    SciTech Connect (OSTI)

    Schofield, J.

    1984-01-01T23:59:59.000Z

    This presentation describes the computing environment at Argonne National Laboratory and the actions underway to implement a coherent hierarchy of computing systems connected through a heterogeneous file transfer network. A major goal of the Computing Services Division is to integrate heterogeneous computing elements incrementally into a nework, with the goal of having everything somehow connected to everything else. Using standard IBM networking protocols, we have already built a full-function computer-to-computer file transfer network of IBM and DEC VAX systems. Currently, the users on the IBM MVS and VM/CMS systems can use standard IBM commands to send files and mail to DEC VAX users and output devices, and they can receive files from the DEC VAX's as if they had been sent from other IBM systems; similarly, the DEC VAX users can use standard DEC commands to send files and mail to IBM users and output devices, and they can receive files from the IBM systems as if they had been sent from other DEC VAX systems. In fact, the VAXes can exchange files and mail among themselves via the IBM NJE-based network without the need for DECnet links between the VAXes. Because this integrated heterogeneous file transfer network uses the standard IBM peer-to-peer communications protocol, all of the Laboratory's IBM and DEC computers easily communicate with the approximately 170 other computers in the Bitnet university network. Plans call for further integration of existing HP 3000 systems and future word processing systems such as Exxon, NBI, or Wang; we believe it is vitally important to provide smooth paths into this network for users of personal desktop computers. 17 references.

  1. Consolidation of zirconium-based metallic glass powder by equal channel angular extrusion 

    E-Print Network [OSTI]

    Robertson, Jonathan Mark

    2002-01-01T23:59:59.000Z

    In this study, amorphous Zr??.?Nb?.?Cu??.?Ni??.?Al??.? (Vitreloy 106a) gas-atomized powder was consolidated by equal channel angular extrusion (ECAE). Several copper cans were filled with the powder, vacuum encapsulated and subjected to one...

  2. Fabrication of NiTi shape memory alloy from elemental powders by hot isostatic pressing 

    E-Print Network [OSTI]

    McNeese, Matthew Doyle

    1997-01-01T23:59:59.000Z

    The research involved in this thesis was conducted to develop a procedure for producing cylindrical specimens of NiTi shape memory alloy for mechanical testing from elemental powders by hot isostatic pressing. Powders were mixed to ratios of 50...

  3. Fabrication of NiTi shape memory alloy from elemental powders by hot isostatic pressing

    E-Print Network [OSTI]

    McNeese, Matthew Doyle

    1997-01-01T23:59:59.000Z

    The research involved in this thesis was conducted to develop a procedure for producing cylindrical specimens of NiTi shape memory alloy for mechanical testing from elemental powders by hot isostatic pressing. Powders were mixed to ratios of 50...

  4. Electrically insulating phosphate coatings for iron powder based electromagnetic core applications

    E-Print Network [OSTI]

    Nolan, William Rane

    2009-01-01T23:59:59.000Z

    Powdered metals, such as iron, are a common building block for electromagnetic cores. An iron powder was reacted with phosphoric acid to create a layer of iron phosphate on each particle. This electrically insulating ...

  5. STUDIES OF DESIGN PARAMETERS IN THE FABRICATION OF Nb-Al-Ge SUPERCONDUCTORS BY THE POWDER METALLURGY INFILTRATION METHOD

    E-Print Network [OSTI]

    Granda, J.J.

    2010-01-01T23:59:59.000Z

    TicltcJ by a Powder Metallurgy Approach, (D. Eng. Thesis)SUPERCONDUCTORS BY THE POWDER METALLURGY INFILTRATION METHODBY TrIE POWDER METALLURGY INFILTRATION METHOD Jose J. Granda

  6. Collective operations in a file system based execution model

    DOE Patents [OSTI]

    Shinde, Pravin; Van Hensbergen, Eric

    2013-02-12T23:59:59.000Z

    A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

  7. Collective operations in a file system based execution model

    DOE Patents [OSTI]

    Shinde, Pravin; Van Hensbergen, Eric

    2013-02-19T23:59:59.000Z

    A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

  8. Nonaqueous solution synthesis process for preparing oxide powders of lead zirconate titanate and related materials

    DOE Patents [OSTI]

    Voigt, James A. (Corrales, NM); Sipola, Diana L. (Albuquerque, NM); Tuttle, Bruce A. (Albuquerque, NM); Anderson, Mark T. (Woodbury, MN)

    1999-01-01T23:59:59.000Z

    A process for producing powders of perovskite-type compounds which comprises mixing a metal alkoxide solution with a lead acetate solution to form a homogeneous, clear metal solution, adding an oxalic acid/n-propanol solution to this metal solution to form an easily filterable, free-flowing precursor powder and then calcining this powder. This process provides fine perovskite-phase powders with ferroelectric properties which are particularly useful in a variety of electronic applications.

  9. Nonaqueous solution synthesis process for preparing oxide powders of lead zirconate titanate and related materials

    DOE Patents [OSTI]

    Voigt, J.A.; Sipola, D.L.; Tuttle, B.A.; Anderson, M.T.

    1999-06-01T23:59:59.000Z

    A process is disclosed for producing powders of perovskite-type compounds which comprises mixing a metal alkoxide solution with a lead acetate solution to form a homogeneous, clear metal solution, adding an oxalic acid/n-propanol solution to this metal solution to form an easily filterable, free-flowing precursor powder and then calcining this powder. This process provides fine perovskite-phase powders with ferroelectric properties which are particularly useful in a variety of electronic applications. 4 figs.

  10. Introduction Container Library Container Tools FUSE Container File System Evaluation Container Library and FUSE Container File

    E-Print Network [OSTI]

    The library was completely overhauled It now provides consistently named functions and data types The commentsIntroduction Container Library Container Tools FUSE Container File System Evaluation Container Library and FUSE Container File System Softwarepraktikum f¨ur Fortgeschrittene Michael Kuhn Parallele und

  11. GNU Radio & USRPGNU Radio & USRP File transfer through WirelessFile transfer through Wireless

    E-Print Network [OSTI]

    Yu, Chansu

    1 GNU Radio & USRPGNU Radio & USRP File transfer through WirelessFile transfer through WirelessSachin Hirve April 30, 2008April 30, 2008 Contents:Contents: What is Software Radio?What is Software Radio? USRPUSRP ­­ MultiMulti--functional hardwarefunctional hardware GNU RadioGNU Radio Previous Work

  12. NFS File Handle Security Avishay Traeger, Abhishek Rai, Charles P. Wright, and Erez Zadok

    E-Print Network [OSTI]

    Zadok, Erez

    a file han- dle. When an NFS client performs an operation, it passes the file handle to the server, which decodes the file han- dle to determine what object the file handle refers to. Since NFS is a stateless

  13. Powder, Pomp, Power: Toward a Typology and Genealogy of Effeminacies

    E-Print Network [OSTI]

    Hennen, Peter

    2001-04-01T23:59:59.000Z

    ·f~ , ------------------------- ~: .,:.• ,: •.•..~ .I'~.- POWDER, POMP, POWER: TOWARD A TYPOLOGY AND GENEALOGY OF EFFEMINACIES PETER HENNEN University ofMinnesota Ananalysisofsomeofthevaryinghistoricalandcross-cultural meaningsof... believe it provides a unique perspective from which to analyze the sex/gender system of a given society. More specifically, an analysis of the historical uses of effeminacy can be seen as an indicator of a society's assumptions and attitudes toward women...

  14. Mesoporous-silica films, fibers, and powders by evaporation

    DOE Patents [OSTI]

    Bruinsma, P.J.; Baskaran, S.; Bontha, J.R.; Liu, J.

    1999-07-13T23:59:59.000Z

    This invention pertains to surfactant-templated nanometer-scale porosity of a silica precursor solution and forming a mesoporous material by first forming the silica precursor solution into a preform having a high surface area to volume ratio, then rapid drying or evaporating a solvent from the silica precursor solution. The mesoporous material may be in any geometric form, but is preferably in the form of a film, fiber, powder or combinations thereof. The rapid drying or evaporation of solvent from the solution is accomplished by layer thinning, for example spin casting, liquid drawing, and liquid spraying respectively. Production of a film is by layer thinning, wherein a layer of the silica precursor solution is formed on a surface followed by removal of an amount of the silica precursor solution and leaving a geometrically thinner layer of the silica precursor solution from which the solvent quickly escapes via evaporation. Layer thinning may be by any method including but not limited to squeegeeing and/or spin casting. In powder formation by spray drying, the same conditions of fast drying exists as in spin-casting (as well as in fiber spinning) because of the high surface-area to volume ratio of the product. When a powder is produced by liquid spraying, the particles or micro-bubbles within the powder are hollow spheres with walls composed of mesoporous silica. Mesoporous fiber formation starts with a similar silica precursor solution but with an added pre-polymer making a pituitous mixture that is drawn into a thin strand from which solvent is evaporated leaving the mesoporous fiber(s). 24 figs.

  15. Report on Characterization and Processing of MDD Powder

    SciTech Connect (OSTI)

    Luther, Erik Paul [Los Alamos National Laboratory

    2012-08-21T23:59:59.000Z

    Uranium oxide powers most civilian nuclear reactors worldwide. A large infrastructure based on a well-established technology is in place to support this strategic component of the energy industry. Because uranium oxide fuels are used so ubiquitously, it is expected that ceramic fuel pellets will continue to be used. A better understanding of the properties of the starting materials, the processing methods used to fabricate fuel pellets and how the properties of pellets change in service, are important aspects being studied via experiments, models and simulations. A close integration of these approaches is essential if we are to find new ways to optimize both the fuel composition and structure for the purpose of improving performance, e.g., designed microstructures, reducing process losses, e.g. by net shape sintering, and enabling reprocessing of used fuel; e.g., incorporation of transuranics. Ceramic oxide fuel pellets are typically cold pressed and sintered from a powder feedstock. Consequently, a complete understanding of pellet fabrication requires a thorough knowledge of the process from powder synthesis through quality control and acceptance. In this study, uranium oxide powder synthesized by Modified Direct Denitration (MDD) is evaluated. Use of powders synthesized by novel, simplified approaches such as MDD are both a challenge and an opportunity. The MDD synthesis process offers an opportunity to simplify the fabrication process potentially reducing process losses. MDD also provides a simple path to incorporate transuranics from used fuel reprocessing with minimal handling. The challenge is to demonstrate and ultimately prove the reliability and reproducibility of simplified processing with the performance of fuel pellets experiencing in-pile service. This report summarizes a processing study of uranium oxide pellets made from MDD uranium oxide.

  16. Low temperature fabrication from nano-size ceramic powders

    SciTech Connect (OSTI)

    Gonzalez, E.J.; Piermarini, G.J.; Hockey, B. [and others

    1995-06-01T23:59:59.000Z

    The objective of the compaction process is to produce a dense green-state compact from a nanosize powder that subsequently can be sintered at high temperatures to form a dense ceramic piece. High density in the green-state after pressing is of primary importance for achieving high densities after sintering. Investigation of the compaction behavior of ceramic powders, therefore, is an important part of characterization of raw ceramic powders and evaluation of their compaction behavior, analysis of interaction between particles, and the study of microstructure of green body (unsintered) during pressure-forming processes. The compaction of nanosize ceramic particles into high density green bodies is very difficult. For the nanosize materials used in this study (amorphous Si{sub 3}N{sub 4} and {gamma} Al{sub 2}O{sub 3}), there is no evidence by TEM of partial sintering after synthesis. Nevertheless, strong aggregation forces, such as the van der Waals surface forces of attraction, exist and result in moderate precursor particle agglomeration. More importantly, these attractive surface forces, which increase in magnitude with decreasing particle size, inhibit interparticle sliding necessary for particle rearrangement to denser bodies during subsequent compaction. Attempts to produce high density green body compacts of nanosize particles, therefore, generally have been focused on overcoming these surface forces of attraction by using either dispersive fluids or high pressures with or without lubricating liquids. In the present work, the use of high pressure has been employed as a means of compacting nanosize powders to relatively high green densities.

  17. Heavy-duty truck population, activity and usage patterns. Final report

    SciTech Connect (OSTI)

    Fischer, M.

    1998-07-01T23:59:59.000Z

    The objective of the study was to update the heavy-duty truck (HDT) population, activity (e.g., vehicle miles traveled (VMT), numbers of starts and trips, trip duration, etc.), and usage patterns type of service/business (e.g., delivery, construction, etc.), area of operation (i.e., local, short-haul, long-haul) for HDT`s registered and/or operated in California. The population and activity estimates were done on a weight-class-specific basis light-heavy-duty, medium-heavy-duty and heavy-heavy-duty. Population, activity and usage estimates were based primarily on Department of Motor Vehicles (DMV) registration data and Truck Inventory and Usage Survey (TIUS) data. In addition to the analysis of existing data (i.e., DMV and TIUS), 42 HDTs were fitted with on-board data loggers that recorded numbers of trips and starts, daily VMT and travel by time-of-day.

  18. How-to: Use EMSL's Aurora File System | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How-to: Use EMSL's Aurora File System How-to: Use EMSL's Aurora File System Synopsis The Aurora archive system is used for long-term storage of data collected by EMSL instuments,...

  19. "Annual Electric Power Industry Report (EIA-861 data file)

    Gasoline and Diesel Fuel Update (EIA)

    FILES Electric power sales, revenue, and energy efficiency Form EIA-861 detailed data files Release Date for 2013: February 19, 2015 Next Release date: October 2015 Annual data for...

  20. Data Files Monthly Natural Gas Gross Production Report

    Gasoline and Diesel Fuel Update (EIA)

    Data Files Data Files 1 EIA Best Estimate of Gross Withdrawals: Combination of historical production data from the Natural Gas Annual and current estimates based on data from the...

  1. Thermal analysis of pentaerythritol tetranitrate and development of a powder aging model

    SciTech Connect (OSTI)

    Brown, Geoffrey W [Los Alamos National Laboratory; Sandstrom, Mary M [Los Alamos National Laboratory; Giambra, Anna M [Los Alamos National Laboratory; Archuleta, Jose G [Los Alamos National Laboratory; Monroe, Deirde C [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    We have applied a range of different physical and thermal analysis techniques to characterize the thermal evolution of the specific surface area of pentaerythritol tetranitrate (PETN) powders. Using atomic force microscopy we have determined that the mass transfer mechanism leading to powder coarsening is probably sublimation and redeposition of PETN. Using thermogravimetric analysis we have measured vapor pressures of PETN powders whose aging will be simulated in future work. For one specific powder we have constructed an empirical model of the coarsening that is fit to specific surface area measurements at 60 C to 70 C to provide predictive capability of that powder's aging. Modulated differential scanning calorimetry and mass spectroscopy measurements highlight some of the thermal behavior of the powders and suggest that homologue-based eutectics and impurities are localized in the powder particles.

  2. A study of the validity of language usage as an indicator of ethnic identification 

    E-Print Network [OSTI]

    Patella, Victoria Morrow

    1971-01-01T23:59:59.000Z

    for Index by Sex Analysis of Variance With Respect to Index of Language Usage Mean Index by Sex, Place of Residence, and Border/Non-Border Residence Results of Anova and Mean Index of Language Usage of Mexican American Males and Females With Respect... by Sex: Total Column Indicates What Percent of all R's had Each Index, and Sex Columns Indicate for Each Index, What the Sex Ratio was 7J 1 1 li 21 L Frequency Distribution for Index by Border/ Non-Border Residence Table Page( 22 Percentage...

  3. Duplicate File Names-A Novel Steganographic Data Hiding Technique

    E-Print Network [OSTI]

    Wu, Jie

    or a terrorist plot. None-the-less, these files can also be potentially dangerous viruses, malware, child porn

  4. Martensitic transformation behaviors of rapidly solidified Ti–Ni–Mo powders

    SciTech Connect (OSTI)

    Kim, Yeon-wook, E-mail: ywk@kmu.ac.kr [Department of Advanced Materials, Keimyung University, 1000 Shindang-dong, Dalseo-gu, Daegu 704-701 (Korea, Republic of)] [Department of Advanced Materials, Keimyung University, 1000 Shindang-dong, Dalseo-gu, Daegu 704-701 (Korea, Republic of)

    2012-10-15T23:59:59.000Z

    For the fabrication of bulk near-net-shape shape memory alloys and porous metallic biomaterials, consolidation of Ti–Ni–Mo alloy powders is more useful than that of elemental powders of Ti, Ni and Mo. Ti{sub 50}Ni{sub 49.9}Mo{sub 0.1} shape memory alloy powders were prepared by gas atomization, and transformation temperatures and microstructures of those powders were investigated as a function of powder size. XRD analysis showed that the B2–R–B19 martensitic transformation occurred in powders smaller than 150 ?m. According to DSC analysis of the as-atomized powders, the B2–R transformation temperature (T{sub R}) of the 25–50 ?m powders was 18.4 °C. The T{sub R} decreased with increasing powder size, however, the difference in T{sub R} between 25–50 ?m powders and 100–150 ?m powders is only 1 °C. Evaluation of powder microstructures was based on SEM examination of the surface and the polished and etched powder cross sections and the typical images of the rapidly solidified powders showed cellular morphology. Porous cylindrical foams of 10 mm diameter and 1.5 mm length were fabricated by spark plasma sintering (SPS) at 800 °C and 5 MPa. Finally these porous TiNi alloy samples are heat-treated for 1 h at 850 °C, and then quenched in ice water. The bulk samples have 23% porosity and 4.6 g/cm{sup 3} density and their T{sub R} is 17.8 °C.

  5. Patent subsidy and patent filing in China By Zhen Lei

    E-Print Network [OSTI]

    Sekhon, Jasjeet S.

    Patent subsidy and patent filing in China By Zhen Lei , Zhen Sun, and Brian Wright Department of patent subsidy policies on patent filings in Chi- na. China had rapid growth in patenting in recent years and became the number one in patent filings in 2011. We study five neighboring cities in Jiangsu province

  6. File Popularity Characterisation. Chris Roadknight, Ian Marshall and Deborah Vearer

    E-Print Network [OSTI]

    Marshall, Ian W.

    , BAE 97]. Caches can bring files nearer the client (with a possible reduction in latency), reduce load curve, which plots the number of requests for each file against the file's popularity ranking. It is often said that this popularity curve follows Zipf's law, Popularity = K* ranking-a , with a being close

  7. The Future of the Andrew File System

    ScienceCinema (OSTI)

    None

    2011-04-25T23:59:59.000Z

    The talk will discuss the ten operational capabilities that have made AFS unique in the distributed file system space and how these capabilities are being expanded upon to meet the needs of the 21st century. Derrick Brashear and Jeffrey Altman will present a technical road map of new features and technical innovations that are under development by the OpenAFS community and Your File System, Inc. funded by a U.S. Department of Energy Small Business Innovative Research grant. The talk will end with a comparison of AFS to its modern days competitors.

  8. Janus: Automatic Ontology Builder from XSD Files

    E-Print Network [OSTI]

    Bedini, Ivan; Gardarin, Georges

    2010-01-01T23:59:59.000Z

    The construction of a reference ontology for a large domain still remains an hard human task. The process is sometimes assisted by software tools that facilitate the information extraction from a textual corpus. Despite of the great use of XML Schema files on the internet and especially in the B2B domain, tools that offer a complete semantic analysis of XML schemas are really rare. In this paper we introduce Janus, a tool for automatically building a reference knowledge base starting from XML Schema files. Janus also provides different useful views to simplify B2B application integration.

  9. Stabilized Lithium Metal Powder, Enabling Material and Revolutionary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretaryVideosSpring O&M Users GroupStability BreakoutSoot

  10. Stabilized Lithium Metal Powder, Enabling Material and Revolutionary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretaryVideosSpring O&M Users GroupStability

  11. Friction Stir Welding Download the files fswss.txt and fswdyn.txt from the course website. These files contain

    E-Print Network [OSTI]

    Landers, Robert G.

    Friction Stir Welding QUESTION 1 Download the files fswss.txt and fswdyn.txt from the course website. These files contain experimental data from a friction stir welding process of 6061 aluminum 0 2 1 0 F z b z b d z z a z a + = + + (3) #12;Friction Stir Welding QUESTION 2 Download the files

  12. Summary of EPIC-2001 Rain Map Files EPIC Rainmap files were generated using all surveillance scans (3 tilt, full PPI)

    E-Print Network [OSTI]

    Rutledge, Steven

    information about the rain map cartesian grid and data values of radar reflectivity (dBZ) and rain rate (mm hrSummary of EPIC-2001 Rain Map Files EPIC Rainmap files were generated using all surveillance scans of the surveillance radar scan in UTC. The gif file (1) shows a 1-km height map (CAPPI) of rainfall intensity (mm hr-1

  13. ON THE USAGE OF ANTENNAS IN MIMO AND MISO INTERFERENCE CHANNELS Mariam Kaynia

    E-Print Network [OSTI]

    Gesbert, David

    ON THE USAGE OF ANTENNAS IN MIMO AND MISO INTERFERENCE CHANNELS Mariam Kaynia , Andrea J. Goldsmith case of a MISO chan- nel is considered, where exact expressions for the ergodic capac- ity of the capacity of a MISO broadcast channel with a random beamformer is derived. However, the impact

  14. Optimal Power Procurement and Demand Response with Quality-of-Usage Guarantees

    E-Print Network [OSTI]

    Huang, Longbo

    1 Optimal Power Procurement and Demand Response with Quality-of-Usage Guarantees Longbo Huang, Jean the utility company to jointly perform power procurement and demand response so as to maximize the social are the inte- gration of renewable energy technologies [1] and the design of efficient user demand-response

  15. Semantic Analysis of Web Site Audience by Integrating Web Usage Mining and Web

    E-Print Network [OSTI]

    Libre de Bruxelles, Université

    Semantic Analysis of Web Site Audience by Integrating Web Usage Mining and Web Content Mining Jean://www.jrc.it/langtech Abstract. With the emergence of the World Wide Web, analyzing and improving Web communication has become essential to adapt the Web content to the visitors' expectations. Web communication analysis

  16. The TFRC protocol and its usage for wireless video transmission Christos Bouras1,2

    E-Print Network [OSTI]

    Bouras, Christos

    ) protocol in the area of efficient wireless video transmission and its possible usage in cross-layer power-layer approaches for adaptation of the power transmission level of the sender and TFRC feedback information, and therefore user experience, without unnecessary power consumption. INTRODUCTION Networking complexity has led

  17. ATTRIBUTE MUTABILITY IN USAGE CONTROL Jaehong Park, Xinwen Zhang, and Ravi Sandhu

    E-Print Network [OSTI]

    Sandhu, Ravi

    modern access control systems. Al- though the UCON study has been inspired largely from digital rights only by administrative actions. However, in modern information systems these attributes are often and modern access control policies. 1. Introduction The notion of usage control has been introduced recently

  18. Navy Leadership Disturbed by "Spice" Usage Rise Navy leaders are expressing alarm at recent statistics that

    E-Print Network [OSTI]

    Navy Leadership Disturbed by "Spice" Usage Rise Navy leaders are expressing alarm at recent, mimicking the chemical compounds found in the drug. These products are banned for Navy personnel (NAVADMIN) 108/10 in March 2010, which reemphasized the Navy's drug policy, the U.S. Navy has been

  19. REGULATION POLITIQUE ET REGULATION D'USAGE DANS LE TEMPS DE TRAVAIL1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 REGULATION POLITIQUE ET REGULATION D'USAGE DANS LE TEMPS DE TRAVAIL1 : par G. de Terssac, J REGULATION AND REGULATION OF USE OVER WORKING TIME In this paper we discuss « social regulations » as defined by Reynaud (1999). These regulations, in our case (working)-time regulations, are multiple. Their combination

  20. Instructions for CEC-1250E-4 Biomass and Fossil Fuel Usage Report for Biomass Facilities

    E-Print Network [OSTI]

    Instructions for CEC-1250E-4 Biomass and Fossil Fuel Usage Report for Biomass Facilities Biomass energy input basis in the upcoming calendar year? - Please check "yes" or "no." 12. Types of Biomass Fuel Used - Please report the quantity and supplier of the following types of biomass fuel used

  1. The Portable Extensible Toolkit for Scientific computing Day 1: Usage and Algorithms

    E-Print Network [OSTI]

    The Portable Extensible Toolkit for Scientific computing Day 1: Usage and Algorithms Jed Brown CSCS runs performantly on a laptop · No iPhone support Jed Brown (ETH Zürich) PETSc day 1 CSCS 2010-05-10 5) · Same code runs performantly on a laptop · No iPhone support Jed Brown (ETH Zürich) PETSc day 1 CSCS

  2. Somniloquy: Augmenting Network Interfaces to Reduce PC Energy Usage Yuvraj Agarwal

    E-Print Network [OSTI]

    Zhou, Yuanyuan

    Somniloquy: Augmenting Network Interfaces to Reduce PC Energy Usage Yuvraj Agarwal , Steve Hodges@cs.ucsd.edu Abstract Reducing the energy consumption of PCs is becoming in- creasingly important with rising energy costs and environmen- tal concerns. Sleep states such as S3 (suspend to RAM) save energy, but are often

  3. Lifestyle studies Market demand Usage patterns Funding: Calif. Energy Commission, BMW, Calif. ARB, ECOtality

    E-Print Network [OSTI]

    California at Davis, University of

    as much energy as it consumes. When done in 2014, the 130-acre UC Davis West Village will be home to 3Consumers Lifestyle studies · Market demand · Usage patterns Funding: Calif. Energy Commission, BMW operation · Energy savings Funding: Chrysler, US Dept of Energy Lead researcher: Kevin Nesbitt, Ph

  4. Mining Usage Data and Development Artifacts Olga Baysal, Reid Holmes, and Michael W. Godfrey

    E-Print Network [OSTI]

    Godfrey, Michael W.

    Mining Usage Data and Development Artifacts Olga Baysal, Reid Holmes, and Michael W. Godfrey Software Architecture Group (SWAG) David R. Cheriton School of Computer Science, University of Waterloo {obaysal, rtholmes, migod}@uwaterloo.ca Abstract--Software repository mining techniques generally focus

  5. UDP: Usage-based Dynamic Pricing with Privacy Preservation for Smart Grid

    E-Print Network [OSTI]

    Shen, Xuemin "Sherman"

    overhead, we introduce distributed community gateways as proxies of the utility company to timely respond are managed adaptively to meet the electricity generation and distribution capabilities at any time be optimally utilized in real time. In this paper, we propose a usage-based dynamic pricing (UDP) scheme

  6. Impact of Liquefied Natural Gas usage and payload size on Hybrid Wing Body aircraft fuel efficiency

    E-Print Network [OSTI]

    Mody, Pritesh (Pritesh Chetan)

    2010-01-01T23:59:59.000Z

    This work assessed Hybrid Wing Body (HWB) aircraft in the context of Liquefied Natural Gas (LNG) fuel usage and payload/range scalability at three scales: H1 (B737), H2 (B787) and H3 (B777). The aircraft were optimized for ...

  7. Mobile Application and Device Power Usage Measurements1,2 Rahul Murmuria, Jeffrey Medsger, Angelos Stavrou

    E-Print Network [OSTI]

    Stavrou, Angelos

    by the operating system's power-management module. We present the models capability to further calculate the powerMobile Application and Device Power Usage Measurements1,2 Rahul Murmuria, Jeffrey Medsger, Angelos Gaithersburg, MD 20899 Email:jeff.voas@nist.gov Abstract--Reducing power consumption has become a cru- cial

  8. A Large-scale Study on Predicting and Contextualizing Building Energy Usage J. Zico Kolter

    E-Print Network [OSTI]

    Kolter, J. Zico

    fuels (Multiple 2009). In the United States, 41% of all energy is consumed in residential and commercial people with feedback about their energy use can itself produce behavior changes that significantly reduce the value of normative energy feedback, showing users how their usage relates to that of their peers

  9. Improving API Documentation Using API Usage Information Jeffrey Stylos, Andrew Faulring, Zizhuang Yang, Brad A. Myers

    E-Print Network [OSTI]

    Matsuda, Noboru

    than with standard Javadoc. 1. Introduction An Application Programming Interface (API) is the userImproving API Documentation Using API Usage Information Jeffrey Stylos, Andrew Faulring, Zizhuang://www.cs.cmu.edu/~jadeite Abstract Jadeite is a new Javadoc-like API documentation system that takes advantage of multiple users

  10. A Graph-based Approach to API Usage Adaptation Hoan Anh Nguyen,1a

    E-Print Network [OSTI]

    Kim, Miryung

    to accommodate new feature requests, to fix bugs, and to meet new standards, changes in API declarationsA Graph-based Approach to API Usage Adaptation Hoan Anh Nguyen,1a Tung Thanh Nguyen,1b Gary Wilson standards, the clients of software libraries often need to make correspond- ing changes to correctly use

  11. The OffPAD: Requirements and Usage Kent Are Varmedal1

    E-Print Network [OSTI]

    Boyer, Edmond

    The OffPAD: Requirements and Usage Kent Are Varmedal1 , Henning Klevjer1 , Joakim Hovlandsv°ag1 by descriptions of different applications that can be implemented with contemporary technology. Finally platform". This certainly provides great flexibility and support for many new business models, but it also

  12. Supporting Mobile Service Usage through Physical Mobile Interaction Gregor Broll1

    E-Print Network [OSTI]

    Service technology and Physical Mobile Interaction. This interaction paradigm uses mobile devicesSupporting Mobile Service Usage through Physical Mobile Interaction Gregor Broll1 , Sven Siorpaes1 albrecht.schmidt@ifi.lmu.de Abstract Although mobile services can be used ubiquitously, their employment

  13. Promiscuous Usage of Nucleotides by the DNA Helicase of Bacteriophage T7

    E-Print Network [OSTI]

    Richardson, Charles C.

    Promiscuous Usage of Nucleotides by the DNA Helicase of Bacteriophage T7 DETERMINANTS OF NUCLEOTIDE activity. Very little is known regarding the architecture of the nucleotide binding site in determining nucleotide specificity. Crystal structures of the T7 helicase domain with bound dATP or dTTP identified Arg

  14. Logo Standards In this guide, you will find usage standards for the

    E-Print Network [OSTI]

    Kasman, Alex

    Logo Standards #12;In this guide, you will find usage standards for the new College of Charleston logo system. This guide is provided as a supplement to the College of Charleston Brand Manual, which at http://marcomm.cofc.edu. The new logo, which combines the existing College of Charleston wordmark

  15. L'usage d'un micro-monde pour apprendre la programmation en LOGO

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    L'usage d'un micro-monde pour apprendre la programmation en LOGO Marios Xenos1 , Zacharoula difficultés, en utilisant le langage LOGO pour programmer le comportement d'objets dans un contexte de permet aux élèves de changer le code en LOGO pour modifier les éléments graphiques et affecter le

  16. Optimisation of Fuel Usage and Steam Availability in the Power and Steam

    E-Print Network [OSTI]

    Cambridge, University of

    the medium pressure manifold (nominally operated at 14 bar), through a steam turbine that can be usedOptimisation of Fuel Usage and Steam Availability in the Power and Steam Plant of a Paper Mill KEYWORDS: Model Predictive Control, Improved Efficiency, Optimisation, Power and Steam Supply System

  17. Woodfuel Usage Update 1 I Wood fuel use in Scotland 2012 I Hudson Consulting I November 2012

    E-Print Network [OSTI]

    furnish of 150k odt/yr in 2012. 9. Including wood going for the production of pellets, usage of wood in progress 3.3. Wood fuel usage by fuel category 3.4. Pellet plants 3.5. Greenhouse gas emissions 4 to 1.073 million odt in 2014. 8. Four wood pellet manufacturing plants in Scotland used in total some

  18. Characterization of Hafnia Powder Prepared from an Oxychloride Sol Gel

    SciTech Connect (OSTI)

    McGilvery, Catriona M. [Imperial College, London; De Gendt, S [Imperial College, London; Payzant, E Andrew [ORNL; MacKenzie, M [Imperial College, London; Craven, A J [Imperial College, London; McComb, D W [Imperial College, London

    2011-01-01T23:59:59.000Z

    Hafnium containing compounds are of great importance to the semiconductor industry as a replacement for Si(O,N) with a high- gate dielectric. Whilst Hf is already being incorporated into working devices1, much is still to be understood about it. Here we investigate the crystallisation processes and chemistry of bulk HfO2 powders which will aid in interpretation of reactions and crystallisation events occurring in thin films used as gate dielectrics. Amorphous HfO2 powder was prepared via a sol-gel route using hafnium oxychloride (HfOCl2 xH2O) as a precursor. The powders were subjected to various heat treatments and analysed using x-ray diffraction (XRD) and thermal analysis techniques. It was found that a large change in the crystallisation pathway occurred when the sample was heated in an inert environment compared with in air. Instead of the expected monoclinic phase (m-HfO2), tetragonal HfO2 (t-HfO2) also formed under these conditions and was observed up to temperatures of ~760 C. The t-HfO2 particles, which are less than 30nm in size, eventually transform into m-HfO2 on further heating. Possible mechanisms for the crystallisation of t-HfO2 are discussed. It is proposed that within this temperature range t-HfO2 is stabilised due to the presence of oxygen vacancies in the inert environment, forming by the reduction of HfIV to HfIII. As the crystal grows in size as the temperature increases there are too few oxygen vacancies left in the structure to continue stabilising the t-HfO2 phase and so transformation to m-HfO2 occurs.

  19. Production of films and powders for semiconductor device applications

    DOE Patents [OSTI]

    Bhattacharya, R.N.; Noufi, R.; Li Wang

    1998-03-24T23:59:59.000Z

    A process is described for chemical bath deposition of selenide and sulfide salts as films and powders employable as precursors for the fabrication of solar cell devices. The films and powders include (1) Cu{sub x}Se{sub n}, wherein x=1--2 and n=1--3; (2) Cu{sub x}Ga{sub y}Se{sub n}, wherein x=1--2, y=0--1 and n=1--3; (3) Cu{sub x}In{sub y}Se{sub n}, wherein x=1--2.27, y=0.72--2 and n=1--3; (4) Cu{sub x}(InGa){sub y}Se{sub n}, wherein x=1--2.17, y=0.96--2 and n=1--3; (5) In{sub y}Se{sub n}, wherein y=1--2.3 and n=1--3; (6) Cu{sub x}S{sub n}, wherein x=1--2 and n=1--3; and (7) Cu{sub x}(InGa){sub y}(SeS){sub n}, wherein x=1--2, y=0.07--2 and n=0.663--3. A reaction vessel containing therein a substrate upon which will form one or more layers of semiconductor material is provided, and relevant solution mixtures are introduced in a sufficient quantity for a sufficient time and under favorable conditions into the vessel to react with each other to produce the resultant salt being prepared and deposited as one or more layers on the substrate and as a powder on the floor of the vessel. Hydrazine is present during all reaction processes producing non-gallium containing products and optionally present during reaction processes producing gallium-containing products to function as a strong reducing agent and thereby enhance reaction processes. 4 figs.

  20. Structural studies of magnesium nitride fluorides by powder neutron diffraction

    SciTech Connect (OSTI)

    Brogan, Michael A. [School of Chemistry, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Hughes, Robert W. [WestCHEM, School of Chemistry, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Smith, Ronald I. [ISIS Pulsed Neutron and Muon Source, Science and Technology Facilities Council, Rutherford Appleton Laboratory, Harwell Oxford, Didcot OX11 0QX (United Kingdom); Gregory, Duncan H., E-mail: Duncan.Gregory@glasgow.ac.uk [WestCHEM, School of Chemistry, University of Glasgow, Glasgow G12 8QQ (United Kingdom)

    2012-01-15T23:59:59.000Z

    Samples of ternary nitride fluorides, Mg{sub 3}NF{sub 3} and Mg{sub 2}NF have been prepared by solid state reaction of Mg{sub 3}N{sub 2} and MgF{sub 2} at 1323-1423 K and investigated by powder X-ray and powder neutron diffraction techniques. Mg{sub 3}NF{sub 3} is cubic (space group: Pm3m) and has a structure related to rock-salt MgO, but with one cation site vacant. Mg{sub 2}NF is tetragonal (space group: I4{sub 1}/amd) and has an anti-LiFeO{sub 2} related structure. Both compounds are essentially ionic and form structures in which nitride and fluoride anions are crystallographically ordered. The nitride fluorides show temperature independent paramagnetic behaviour between 5 and 300 K. - Graphical abstract: Definitive structures of the ternary magnesium nitride fluorides Mg{sub 3}NF{sub 3} and the lower temperature polymorph of Mg{sub 2}NF have been determined from powder neutron diffraction data. The nitride halides are essentially ionic and exhibit weak temperature independent paramagnetic behaviour. Highlights: Black-Right-Pointing-Pointer Definitive structures of Mg{sub 3}NF{sub 3} and Mg{sub 2}NF were determined by neutron diffraction. Black-Right-Pointing-Pointer Nitride and fluoride anions are crystallographically ordered in both structures. Black-Right-Pointing-Pointer Both compounds exhibit weak, temperature independent paramagnetic behaviour. Black-Right-Pointing-Pointer The compounds are essentially ionic with ionicity increasing with F{sup -} content.

  1. Seer: An analysis package for LHCO files

    E-Print Network [OSTI]

    Martin, Travis A W

    2015-01-01T23:59:59.000Z

    Seer is a multipurpose package for performing trigger, signal determination and cuts of an arbitrary number of collider processes stored in the LHCO file format. This article details the use of Seer, including the necessary details for users to customize the code for investigating new kinematic variables.

  2. Consanguine Calculations Input File: blood.in

    E-Print Network [OSTI]

    California at Berkeley, University of

    1 of 20 Problem A+ Consanguine Calculations Input File: blood.in Every person's blood has 2 markers in a particular ABO blood type for that person. Combination ABO Blood Type AA A AB AB AO A BB B BO B OO O Likewise, every person has two alleles for the blood Rh factor, represented by the characters + and -. Someone who

  3. Historical_Habitats File Geodatabase Feature Class

    E-Print Network [OSTI]

    Historical_Habitats File Geodatabase Feature Class Tags Historical ecology, Ventura, Oxnard View, Meiners Oaks, Camarillo, Somis, Ventura River, Santa Clara River, Calleguas Creek, Santa Paula Springs, Ormond Beach, Mandalay Beach, Pierpont Bay, McGrath Lake, Ventura County, Los Angeles County

  4. DEEP SEA DRILLING PROJECT DATA FILE DOCUMENTS

    E-Print Network [OSTI]

    for the program is provided by the following agencies: Department of Energy, Mines and Resources (Canada) Deutsche&M University, as an account of work performed under the international Ocean Drilling Program which is managedDEEP SEA DRILLING PROJECT DATA FILE DOCUMENTS Ocean Drilling Program Texas A&M University Technical

  5. Design and Implementation of a Metadata-rich File System

    SciTech Connect (OSTI)

    Ames, S; Gokhale, M B; Maltzahn, C

    2010-01-19T23:59:59.000Z

    Despite continual improvements in the performance and reliability of large scale file systems, the management of user-defined file system metadata has changed little in the past decade. The mismatch between the size and complexity of large scale data stores and their ability to organize and query their metadata has led to a de facto standard in which raw data is stored in traditional file systems, while related, application-specific metadata is stored in relational databases. This separation of data and semantic metadata requires considerable effort to maintain consistency and can result in complex, slow, and inflexible system operation. To address these problems, we have developed the Quasar File System (QFS), a metadata-rich file system in which files, user-defined attributes, and file relationships are all first class objects. In contrast to hierarchical file systems and relational databases, QFS defines a graph data model composed of files and their relationships. QFS incorporates Quasar, an XPATH-extended query language for searching the file system. Results from our QFS prototype show the effectiveness of this approach. Compared to the de facto standard, the QFS prototype shows superior ingest performance and comparable query performance on user metadata-intensive operations and superior performance on normal file metadata operations.

  6. Bulk synthesis of nanoporous palladium and platinum powders

    DOE Patents [OSTI]

    Robinson, David B. (Fremont, CA); Fares, Stephen J. (Pleasanton, CA); Tran, Kim L. (Livermore, CA); Langham, Mary E. (Pleasanton, CA)

    2012-04-17T23:59:59.000Z

    Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

  7. New coal dewatering technology turns sludge to powder

    SciTech Connect (OSTI)

    NONE

    2009-03-15T23:59:59.000Z

    Virginian Tech's College of Engineering's Roe-Hoan Yoon and his group have developed a hyperbaric centrifuge that can dewater coal as fine as talcum powder. Such coal fines presently must be discarded by even the most advanced coal cleaning plants because of their high moisture content. The new technology can be used with the Microcel technology to remove ash, to re-mine the fine coal discarded to impoundments and to help minimize waste generation. Virginia Tech has received $1 million in funding from the US Department of State to also help the Indian coal industry produce a cleaner product. 1 photo.

  8. Bulk synthesis of nanoporous palladium and platinum powders

    DOE Patents [OSTI]

    Robinson, David B; Fares, Stephen J; Tran, Kim L; Langham, Mary E

    2014-04-15T23:59:59.000Z

    Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

  9. QER - Comment of Powder River Energy Corporation | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR - TProcuring SolarNo. 195 -Pueblo de SanPutting ItQA20Powder

  10. Powder River Energy Corporation (Montana) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroupPerfectenergyInformation to ReducePoseidonPowder River Energy

  11. Powder River Energy Corporation Smart Grid Project | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroupPerfectenergyInformation to ReducePoseidonPowder River

  12. Powder River, Wyoming: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: EnergyPiratiniEdwards,PoseyPoudre Valley R E A,Poway,Powder

  13. Method for removing oxide contamination from silicon carbide powders

    DOE Patents [OSTI]

    Brynestad, J.; Bamberger, C.E.

    1984-08-01T23:59:59.000Z

    The described invention is directed to a method for removing oxide contamination in the form of oxygen-containing compounds such as SiO/sub 2/ and B/sub 2/O/sub 3/ from a charge of finely divided silicon carbide. The silicon carbide charge is contacted with a stream of hydrogen fluoride mixed with an inert gas carrier such as argon at a temperature in the range of about 200/sup 0/ to 650/sup 0/C. The oxides in the charge react with the heated hydrogen fluoride to form volatile gaseous fluorides such as SiF/sub 4/ and BF/sub 3/ which pass through the charge along with unreacted hydrogen fluoride and the carrier gas. Any residual gaseous reaction products and hydrogen fluoride remaining in the charge are removed by contacting the charge with the stream of inert gas which also cools the powder to room temperature. The removal of the oxygen contamination by practicing the present method provides silicon carbide powders with desirable pressing and sintering characteristics. 1 tab.

  14. Helium/solid powder O-ring leakage correlation experiments

    SciTech Connect (OSTI)

    Leisher, W.B.; Weissman, S.H.; Tallant, D.R.; Kubo, M.

    1983-01-01T23:59:59.000Z

    We have developed a method to test powder leakage that has passed O-ring seals. To validate this method we have spiked a test fixture with 98 ng of U and recovered 130 +- 25 ng of U. We did not detect U at a detection limit of 26 ng in a fixture which was treated as a blank. This method has been applied to the leakage of UO/sub 2/ powder passing the type of EPDM O-ring seals used in a SNM shipping cask belonging to PNC. Considering the three experimental tests in which no or very small quantities of U were detected as effective blank test, it appears that the level of external contamination is negligible. Therefore, we believe that the U quantities greater than 26 ng (6 tests) passed the primary O-ring seal. From this limited quantity of data, we observe no apparent correlation between the amount of U measured and either helium leak rate or equivalent tube diameter. The data for the 130/sup 0/C tests indicate the possibility of a U/time relationship; however, more data are needed for verification.

  15. Multi-scale analysis and simulation of powder blending in pharmaceutical manufacturing

    E-Print Network [OSTI]

    Ngai, Samuel S. H

    2005-01-01T23:59:59.000Z

    A Multi-Scale Analysis methodology was developed and carried out for gaining fundamental understanding of the pharmaceutical powder blending process. Through experiment, analysis and computer simulations, microscopic ...

  16. High-performance Ni[sub 3]Al synthesized from composite powders

    SciTech Connect (OSTI)

    Chiou, W.C.; Hu, C.T. (National Tsing Hua Univ., Hsinchu (Taiwan, Province of China). Dept. of Materials Science and Engineering)

    1994-05-01T23:59:59.000Z

    Specimens of Ni[sub 3]Al + B of high density (>99.3 pct RD) and relatively large dimension have been synthesized from composite powders through processes of replacing plating and electroless Ni-B plating on Al powder, sintering, and thermal-mechanical treatment. The uniformly coated Ni layer over fine Al or Ni core particles constituting these coating/core composite powders has advantages such as better resistance to oxidation relative to pure Al powder, a greater green density as a compacted powder than prealloyed powder, the possibility of atomically added B to the material by careful choice of a suitable plating solution, and avoidance of the expensive powder metallurgy (PM) equipment such as a hot isostatic press (HIP), hot press (HP), etc. The final Ni[sub 3]Al + B product is made from Ni-B-Al and Ni-B-Ni mixed composite powders by means of traditional PM processes such as compacting, sintering, rolling, and annealing, and therefore, the dimensions of the product are not constrained by the capacity of an HIP or HP. The properties of Ni[sub 3]Al composite powder metallurgy (CPM) specimens tested at room temperature have been obtained, and comparison with previous reports is conducted. A tensile elongation of about 16 pct at room temperature was attained.

  17. Rapid additive manufacturing of MR compatible multipinhole collimators with selective laser melting of tungsten powder

    SciTech Connect (OSTI)

    Deprez, Karel; Vandenberghe, Stefaan; Van Audenhaege, Karen; Van Vaerenbergh, Jonas; Van Holen, Roel [MEDISIP, Department of Electronics and Information Systems, Ghent University-iMinds-IBiTech, De Pintelaan 185, B-9000 Ghent (Belgium); Layerwise NV, Kapeldreef 60, 3001 Leuven (Belgium); MEDISIP, Department of Electronics and Information Systems, Ghent University-iMinds-IBiTech, De Pintelaan 185, B-9000 Ghent (Belgium)

    2013-01-15T23:59:59.000Z

    Purpose: The construction of complex collimators with a high number of oblique pinholes is very labor intensive, expensive or is sometimes impossible with the current available techniques (drilling, milling or electric discharge machining). All these techniques are subtractive: one starts from solid plates and the material at the position of the pinholes is removed. The authors used a novel technique for collimator construction, called metal additive manufacturing. This process starts with a solid piece of tungsten on which a first layer of tungsten powder is melted. Each subsequent layer is then melted on the previous layer. This melting is done by selective laser melting at the locations where the CAD design file defines solid material. Methods: A complex collimator with 20 loftholes with 500 {mu}m diameter pinhole opening was designed and produced (16 mm thick and 70 Multiplication-Sign 52 mm{sup 2} transverse size). The density was determined, the production accuracy was measured (GOM ATOS II Triple Scan, Nikon AZ100M microscope, Olympus IMT200 microscope). Point source measurements were done by mounting the collimator on a SPECT detector. Because there is increasing interest in dual-modality SPECT-MR imaging, the collimator was also positioned in a 7T MRI scanner (Bruker Pharmascan). A uniform phantom was acquired using T1, T2, and T2* sequences to check for artifacts or distortion of the phantom images due to the collimator presence. Additionally, three tungsten sample pieces (250, 500, and 750 {mu}m thick) were produced. The density, attenuation (140 keV beam), and uniformity (GE eXplore Locus SP micro-CT) of these samples were measured. Results: The density of the collimator was equal to 17.31 {+-} 0.10 g/cm{sup 3} (89.92% of pure tungsten). The production accuracy ranges from -260 to +650 {mu}m. The aperture positions have a mean deviation of 5 {mu}m, the maximum deviation was 174 {mu}m and the minimum deviation was -122 {mu}m. The mean aperture diameter is 464 {+-} 19 {mu}m. The calculated and measured sensitivity and resolution of point sources at different positions in the field-of-view agree well. The measured and expected attenuation of the three sample pieces are in a good agreement. There was no influence of the 7T magnetic field on the collimator (which is paramagnetic) and minimal distortion was noticed on the MR scan of the uniform phantom. Conclusions: Additive manufacturing is a very promising technique for the production of complex multipinhole collimators and may also be used for producing other complex collimators. The cost of this technique is only related to the amount of powder needed and the time it takes to have the collimator built. The timeframe from design to collimator production is significantly reduced.

  18. Quick Start The various sample data files after expansion (use Zip)

    E-Print Network [OSTI]

    library (49 signature files and 1 library list file, all in ASCII, 300 KB). Duncan Knob.sdf Lidar full wave form SDF file (60 MB). Duncan Knob.idx Required index file for Duncan Knob.sdf (4.5 MB). sbet_mission 1.out Smoothed Best Estimate of Trajectory file. Needed for Duncan Knob.sdf (98 MB). Immediate

  19. March 24, 2008 ADBS: Storage 1 Disk Storage, Basic File Structures, and

    E-Print Network [OSTI]

    Adam, Salah

    March 24, 2008 ADBS: Storage 1 Disk Storage, Basic File Structures, and Hashing. #12;March 24, 2008 ADBS: Storage 2 Chapter Outline The Storage Hierarchy How Far is Your Data Disk Storage Devices Records Blocking Files of Records Unordered Files Ordered Files Hashed Files RAID Technology Storage Area Network

  20. Identifying Software Usage at HPC Centers with the Automatic Library Tracking Database

    SciTech Connect (OSTI)

    Hadri, Bilel [ORNL; Fahey, Mark R [ORNL; Jones, Nicholas A [ORNL

    2010-01-01T23:59:59.000Z

    A library tracking database has been developed to monitor software/library usage. This Automatic Library Tracking Database (ALTD) automatically and transparently stores, into a database, information about the libraries linked into an application at compilation time and also the executables launched in a batch job. Information gathered into the database can then be mined to provide reports. Analyzing the results from the data collected will help to identify, for example, the most frequently used and the least used libraries and codes, and those users that are using deprecated libraries or applications. We will illustrate the usage of libraries and executables on the Cray XT platforms hosted at the National Institute for Computational Sciences and the Oak Ridge Leadership Computing Facility (both located at Oak Ridge National Laboratory).

  1. Usage Demographics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence mayUndergraduateAbout Us Updatesproject

  2. Incorporating safety into surface haulage in the Powder River basin

    SciTech Connect (OSTI)

    Jeffery, W.; Jennings, C.

    1996-12-31T23:59:59.000Z

    The Powder River Basin (PRB) coal deposit extends from southeast Montana to northeast Wyoming. This paper describes a number of haulage practices and tools in use at several mines of the southern PRB and the way in which safety has been designed into and implemented for surface haulage of coal and overburden. Experiences described herein focus on the northeastern corner of Wyoming. All the mines in this area rely on safe and efficient movement of enormous volumes of material, and the results achieved in safety underscore the planning and attention to detail present in the PRB. There are currently 12 large surface mines (those greater than 10.0MM tons/year) operating in this area. In 1995, these mines produced over 230.0MM tons of coal.

  3. High Pressure Neutron Powder Diffraction Study of Superhydrated Natrolite

    SciTech Connect (OSTI)

    Colligan,M.; Lee, Y.; Vogt, T.; Celestian, A.; Parise, J.; Marshall, W.; Hriljac, J.

    2005-01-01T23:59:59.000Z

    Neutron powder diffraction data were collected on a sample of natrolite and a 1:1 (v/v) mixture of perdeuterated methanol and water at a pressure of 1.87(11) GPa. The natrolite sample was superhydrated, with a water content double that observed at ambient pressure. All of the water deuterium atoms were located and the nature and extent of the hydrogen bonding elucidated for the first time. This has allowed the calculation of bond valence sums for the water oxygen atoms, and from this, it can be deduced that the key energetic factor leading to loss of the additional water molecule upon pressure release is the poor coordination to sodium cations within the pores.

  4. Preparation of lead-zirconium-titanium film and powder by electrodeposition

    DOE Patents [OSTI]

    Bhattacharya, R.N.; Ginley, D.S.

    1995-10-31T23:59:59.000Z

    A process is disclosed for the preparation of lead-zirconium-titanium (PZT) film and powder compositions. The process comprises the steps of providing an electrodeposition bath, providing soluble salts of lead, zirconium and titanium metals to this bath, electrically energizing the bath to thereby direct ions of each respective metal to a substrate electrode and cause formation of metallic particles as a recoverable film of PZT powder on the electrode, and also recovering the resultant film as a powder. Recovery of the PZT powder can be accomplished by continually energizing the bath to thereby cause powder initially deposited on the substrate-electrode to drop therefrom into the bath from which it is subsequently removed. A second recovery alternative comprises energizing the bath for a period of time sufficient to cause PZT powder deposition on the substrate-electrode only, from which it is subsequently recovered. PZT film and powder so produced can be employed directly in electronic applications, or the film and powder can be subsequently oxidized as by an annealing process to thereby produce lead-zirconium-titanium oxide for use in electronic applications. 4 figs.

  5. Analysis of melting and resolidification in a two-component metal powder bed subjected

    E-Print Network [OSTI]

    Zhang, Yuwen

    produced. Ó 2005 Elsevier Ltd. All rights reserved. 1. Introduction Selective laser sintering (SLS the surface of a powder bed is scanned with a laser heat source to melt the pow- der and as the beam movesAnalysis of melting and resolidification in a two-component metal powder bed subjected to temporal

  6. Characterization of prealloyed copper powders treated in high energy ball mill

    SciTech Connect (OSTI)

    Rajkovic, Viseslava [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro)]. E-mail: visnja@vin.bg.ac.yu; Bozic, Dusan [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro); Jovanovic, Milan T. [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro)

    2006-08-15T23:59:59.000Z

    The inert gas atomised prealloyed copper powders containing 3.5 wt.% Al were milled up to 20 h in the planetary ball mill in order to oxidize aluminium in situ with oxygen from the air. In the next procedure compacts from milled powder were synthesized by hot-pressing in argon atmosphere. Compacts from as-received Cu-3.5 wt.% Al powder and electrolytic copper powder were also prepared under the same conditions. Microstructural and morphological changes of high energy milled powder as well as changes of thermal stability and electrical conductivity of compacts were studied as a function of milling time and high temperature exposure at 800 deg. C. Optical, scanning electron microscopy (SEM) and X-ray diffraction analysis were performed for microstructural characterization, whereas thermal stability and electrical conductivity were evaluated by microhardness measurements and conductometer Sigmatest, respectively. The prealloyed 5 h-milled and compacted powder showed a significant increase in microhardness reaching the value of 2600 MPa, about 4 times greater than that of compacts synthesized from as-received electrolytic copper powder (670 MPa). The electrical conductivity of compacts from 5 h-milled powder was 52% IACS. The results were discussed in terms of the effect of small grain size and finely distributed alumina dispersoids on hardening and thermal stability of compacts.

  7. Hydrogen production with nickel powder cathode catalysts in microbial electrolysis cells

    E-Print Network [OSTI]

    Hydrogen production with nickel powder cathode catalysts in microbial electrolysis cells Priscilla Available online 24 November 2009 Keywords: MEC Electrohydrogenesis Hydrogen production Cathode Metal Nickel using a nickel powder (0.5­1 mm) and their performance was compared to conventional electrodes

  8. A Modeling-Based Technique for Nondestructive Evaluation of Metal Powders Undergoing Microwave Sintering

    E-Print Network [OSTI]

    Yakovlev, Vadim

    A Modeling-Based Technique for Nondestructive Evaluation of Metal Powders Undergoing Microwave of sensors and probes (see, e.g., [9]) is very limited here because of high (up to hundreds degrees Celsius the development of suitable means of nondestructive evaluation (NDE) of powder samples under microwave 978

  9. Full densification of Molybdenum powders using Spark Plasma Sintering B. Mouawad1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Full densification of Molybdenum powders using Spark Plasma Sintering B. Mouawad1 , M. Soueidan1, 2.bley@laplace.univ-tlse.fr, bruno.allard@insa- lyon.fr Abstract: Pure molybdenum powder was sintered using Spark Plasma Sintering Plasma Sintering, densification, microstructure. I. Introduction Molybdenum has a body-centered cubic

  10. Preparation of lead-zirconium-titanium film and powder by electrodeposition

    DOE Patents [OSTI]

    Bhattacharya, Raghu N. (Littleton, CO); Ginley, David S. (Evergreen, CO)

    1995-01-01T23:59:59.000Z

    A process for the preparation of lead-zirconium-titanium (PZT) film and powder compositions. The process comprises the steps of providing an electrodeposition bath, providing soluble salts of lead, zirconium and titanium metals to this bath, electrically energizing the bath to thereby direct ions of each respective metal to a substrate electrode and cause formation of metallic particles as a recoverable film of PZT powder on the electrode, and also recovering the resultant film as a powder. Recovery of the PZT powder can be accomplished by continually energizing the bath to thereby cause powder initially deposited on the substrate-electrode to drop therefrom into the bath from which it is subsequently removed. A second recovery alternative comprises energizing the bath for a period of time sufficient to cause PZT powder deposition on the substrate-electrode only, from which it is subsequently recovered. PZT film and powder so produced can be employed directly in electronic applications, or the film and powder can be subsequently oxidized as by an annealing process to thereby produce lead-zirconium-titanium oxide for use in electronic applications.

  11. Logarithmic Decay in Single-Particle Relaxation of Hydrated Lysozyme Powder Marco Lagi,1,2

    E-Print Network [OSTI]

    Chen, Sow-Hsin

    Logarithmic Decay in Single-Particle Relaxation of Hydrated Lysozyme Powder Marco Lagi,1,2 Piero-dynamics of protein amino acids of hydrated lysozyme powder around the physiological temperature by means of molecular and their hydration water display a feature known as boson peak, typical of strong glass formers [3]; (3) the protein

  12. Atmospheric ageing of nanosized silicon nitride powders Janos Szepvolgyi,*a

    E-Print Network [OSTI]

    Gubicza, Jenõ

    . Introduction Silicon nitride powders produced in high temperature thermal plasmas by the vapour phase reaction of silicon tetrachloride and ammonia have many interesting properties including high purity, mainly amorphous powders subjected to atmospheric ageing, including amino, hydroxy and silanol groups, adsorbed CO2

  13. Ultrasonic characterization of the curing of powder coating films based on their tan()

    E-Print Network [OSTI]

    either focus on in-process temperature monitoring or on laboratory analysis of powder samples mechanical testing. I. INTRODUCTION Powder coatings are dry polymer based surface coatings that are sprayed using in-process temperature monitoring methods. Various in situ cure monitoring methods have been

  14. Sinterable ceramic powders from laser heated gas phase reactions and rapidly solidified ceramic materials : annual report.

    E-Print Network [OSTI]

    Haggerty, John Scarseth

    1984-01-01T23:59:59.000Z

    CO[subscript 2] lasers have been employed to heat reactant gases to synthesize Si, Si[subscript 3] N[subscript 4] and SiC powders. The powders are small, uniform in size, nonagglomerated, highly pure and of controlled ...

  15. File:03ORENoncompetitiveGeothermalLease.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealandORCEncroachment.pdf Jump to: navigation, search File File history File

  16. CARTOGRAPHIC BASE FILES AT LAWRENCE BERKELEY LABORATORY: 1978. INVENTORY

    E-Print Network [OSTI]

    Burkhart, B.R.

    2011-01-01T23:59:59.000Z

    BERKELEY LABORATORY: 1978 INVENTORY f(ECEfVED tAWRENCE!FILES AT LAWRENCE BERKELEY LABORATORY: 1978 INVENTORY B. R.1979 ABSTRACT This inventory describes the cartographic base

  17. Scalable Parallel File System for Data and Metadata-intensive...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Host: Rob Ross A critical purpose for parallel file systems used in high performance computing is to capture quickly and durably hold checkpoints of long running massive...

  18. Cold compaction study of Armstrong Process Ti-6Al-4V powders

    SciTech Connect (OSTI)

    Chen, Wei [ORNL; Yamamoto, Yukinori [ORNL; Peter, William H [ORNL; Gorti, Sarma B [ORNL; Sabau, Adrian S [ORNL; Clark, Michael B [ORNL; Nunn, Stephen D [ORNL; Kiggans, Jim [ORNL; Blue, Craig A [ORNL; Fuller, Brian [International Titanium Powder; Akhtar, Kamal [International Titanium Powder

    2011-01-01T23:59:59.000Z

    This work investigates the cold compaction behavior of Ti-6Al-4V powders produced by Armstrong Process . As-received as well as milled powders were characterized and these powders were uniaxially die-pressed at designated pressures up to 690 MPa to form disk samples with different aspect ratios. Samples with high aspect ratio exhibited non-uniform density along the pressing axis and the density distribution is in consistent with the result predicted by finite element analysis. The linear regression analysis on the experimental density data can be used to predict density of compacts with different aspect ratios. In the studied pressure range, an empirical powder compaction equation represents the green density pressure relationship very well for both the as-received and 1-hr milled Armstrong Ti-6Al-4V powders.

  19. Causal Factors of Weld Porosity in Gas Tungsten Arc Welding of Powder Metallurgy Produced Titanium Alloys

    SciTech Connect (OSTI)

    Muth, Thomas R [ORNL; Yamamoto, Yukinori [ORNL; Frederick, David Alan [ORNL; Contescu, Cristian I [ORNL; Chen, Wei [ORNL; Lim, Yong Chae [ORNL; Peter, William H [ORNL; Feng, Zhili [ORNL

    2013-01-01T23:59:59.000Z

    ORNL undertook an investigation using gas tungsten arc (GTA) welding on consolidated powder metallurgy (PM) titanium (Ti) plate, to identify the causal factors behind observed porosity in fusion welding. Tramp element compounds of sodium and magnesium, residual from the metallothermic reduction of titanium chloride used to produce the titanium, were remnant in the starting powder and were identified as gas forming species. PM-titanium made from revert scrap where sodium and magnesium were absent, showed fusion weld porosity, although to a lesser degree. We show that porosity was attributable to hydrogen from adsorbed water on the surface of the powders prior to consolidation. The removal / minimization of both adsorbed water on the surface of titanium powder and the residues from the reduction process prior to consolidation of titanium powders, are critical to achieve equivalent fusion welding success similar to that seen in wrought titanium produced via the Kroll process.

  20. Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation

    SciTech Connect (OSTI)

    Innocenzi, V., E-mail: valentina.innocenzi1@univaq.it; De Michelis, I.; Ferella, F.; Vegliò, F.

    2013-11-15T23:59:59.000Z

    Highlights: • Fluorescent powder of lamps. • Fluorescent powder of cathode ray rubes. • Recovery of yttrium from fluorescent powders. • Economic simulation for the processes to recover yttrium from WEEE. - Abstract: In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

  1. Examining the adoption, usage and outcomes of mobile money services: the case of M-PESA in Kenya 

    E-Print Network [OSTI]

    Morawczynski, Olga

    2011-07-04T23:59:59.000Z

    This thesis will examine the adoption, usage and outcomes of a mobile money service called MPESA. Since being launched in 2007, the service has seen phenomenal growth in Kenya. Over 7.5 million users, or 34% of the adult ...

  2. Guidelines for Energy Cost Savings Resulting from Tracking and Monitoring Electrical nad Natural Gas Usage, Cost, and Rates

    E-Print Network [OSTI]

    McClure, J. D.; Estes, M. C.; Estes, J. M.

    1989-01-01T23:59:59.000Z

    This paper discusses how improved energy information in schools and hospitals from tracking and monitoring electrical and natural gas usage, cost, and optional rate structures, can reduce energy costs. Recommendations, methods, and guidelines...

  3. Guidelines for Energy Cost Savings Resulting from Tracking and Monitoring Electrical nad Natural Gas Usage, Cost, and Rates 

    E-Print Network [OSTI]

    McClure, J. D.; Estes, M. C.; Estes, J. M.

    1989-01-01T23:59:59.000Z

    This paper discusses how improved energy information in schools and hospitals from tracking and monitoring electrical and natural gas usage, cost, and optional rate structures, can reduce energy costs. Recommendations, ...

  4. SME-Entrepreneurship Global Conference 2006 -Refereed Paper Bakke et al.: ICT diffusion and usage among Asian SMEs 1

    E-Print Network [OSTI]

    Sahay, Sundeep

    SME-Entrepreneurship Global Conference 2006 - Refereed Paper Bakke et al.: ICT diffusion and usage factors, infrastructures and post-adoption behaviour Paper for the conference: "SME ­ Entrepreneurship. Keywords: Diffusion models, infrastructure, domestication, small and medium sized enterprises, SME, ICT

  5. From Measurements to Sustainable Choices: Non-intrusive Fine-grained Sensing of Resource Usage in Buildings

    E-Print Network [OSTI]

    Jalali. Bahram

    From Measurements to Sustainable Choices: Non-intrusive Fine- grained Sensing of Resource Usage. Example pictures of non-intrusive pipe level water monitoring test-bed and non- intrusive appliance power

  6. Influence of Chemical and Physical Properties of Activated Carbon Powders on Oxygen Reduction and Microbial Fuel Cell Performance

    E-Print Network [OSTI]

    Influence of Chemical and Physical Properties of Activated Carbon Powders on Oxygen Reduction 16802, United States *S Supporting Information ABSTRACT: Commercially available activated carbon (AC) powders made from different precursor materials (coal, peat, coconut shell, hardwood, and phenolic resin

  7. Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process

    DOE Patents [OSTI]

    Balachandran, Uthamalingam (Hinsdale, IL)

    1996-01-01T23:59:59.000Z

    A process for the preparation of amorphous precursor powders for Pb-doped Bi.sub.2 Sr.sub.2 Ca.sub.2 Cu.sub.3 O.sub.x (2223) includes a freeze-drying process incorporating a splat-freezing step. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution without any phase separation; grinding the frozen flakes to form a powder; freeze-drying the frozen powder; heating the dried powder to form a dry green precursor powders; denitrating the green-powders; heating the denitrated powders to form phase-clean Bi-2223 powders. The grain boundaries of the 2223 grains appear to be clean, leading to good intergrain contact between 2223 grains.

  8. Novel synthesis of high phase-purity Mg2SnO4 from metallic precursors via powder metallurgy route

    E-Print Network [OSTI]

    Azad, Abdul-Majeed

    Novel synthesis of high phase-purity Mg2SnO4 from metallic precursors via powder metallurgy route of composition Mg2Sn was prepared by the conventional powder metallurgy route. This up on heating in air under

  9. Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process

    DOE Patents [OSTI]

    Balachandran, U.

    1996-06-04T23:59:59.000Z

    A process for the preparation of amorphous precursor powders for Pb-doped Bi{sub 2}Sr{sub 2} Ca{sub 2}Cu{sub 3}O{sub x} (2223) includes a freeze-drying process incorporating a splat-freezing step. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution without any phase separation; grinding the frozen flakes to form a powder; freeze-drying the frozen powder; heating the dried powder to form a dry green precursor powders; denitrating the green-powders; heating the denitrated powders to form phase-clean Bi-2223 powders. The grain boundaries of the 2223 grains appear to be clean, leading to good intergrain contact between 2223 grains. 11 figs.

  10. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hanson, Steven CJ

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  11. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    SciTech Connect (OSTI)

    Hanson, Steven CJ

    2013-03-07T23:59:59.000Z

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  12. Standard test method for determination of total hydrogen content of uranium oxide powders and pellets by carrier gas extraction

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2000-01-01T23:59:59.000Z

    Standard test method for determination of total hydrogen content of uranium oxide powders and pellets by carrier gas extraction

  13. Standard test method for carbon (total) in uranium oxide powders and pellets by direct combustion-infrared detection method

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    Standard test method for carbon (total) in uranium oxide powders and pellets by direct combustion-infrared detection method

  14. Porous, Biphasic CaCO3-Calcium Phosphate Biomedical Cement Scaffolds from Calcite (CaCO3) Powder

    E-Print Network [OSTI]

    Tas, A. Cuneyt

    Porous, Biphasic CaCO3-Calcium Phosphate Biomedical Cement Scaffolds from Calcite (CaCO3) Powder A porous, biocompatible, and resorb- able materials. Commercially available CaCO3 powders were physically crystallographically and spectroscopically resembled calcium hydroxyapatite. Upon mixing CaCO3 powders and the setting

  15. 3.0 Exporting Models Save model as OBJ file

    E-Print Network [OSTI]

    Gordon, Scott

    3.0 Exporting Models Save model as OBJ file: o Make sure that the model, and the UV-unwrapping, are open and displayed. o File Export wavefront.obj o Navigate to desired directory (remember that single RETURN to accept the name (or use the Export Wavefront button in the upper right) o Click on the Export

  16. Energy Efficient Prefetching with Buffer Disks for Cluster File Systems

    E-Print Network [OSTI]

    Qin, Xiao

    Energy Efficient Prefetching with Buffer Disks for Cluster File Systems Adam Manzanares, Xiaojun the energy- efficiency of large scale parallel storage systems. To address these issues we introduce EEVFS (Energy Efficient Virtual File System), which is able to manage data placement and disk states to help

  17. Harvard Library: FY2011 Volumes, Records, Titles, and Digital Files

    E-Print Network [OSTI]

    Harvard Library: FY2011 Volumes, Records, Titles, and Digital Files Total Expenditures *Digital Millions Fiscal Year Volumes Bibliographic Records Titles Files in DRS* $0 $10 $20 $30 $40 $50 $60 $70 $80 a coordinated management structure and increasingly focus resources on the opportunities presented by new

  18. DOCTORAL STUDENTS FILING CHECKLIST Consider Your Dissertation Content

    E-Print Network [OSTI]

    Jacobs, Lucia

    DOCTORAL STUDENTS FILING CHECKLIST Consider Your Dissertation Content Does your dissertation before you file. PLAN AHEAD! Check Your Committee Log in to GLOW and verify your dissertation committee-3 business days for your dissertation to be reviewed. Be patient! Complete the Additional Forms o Survey

  19. File:Mmpa.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489 NoEuropeStrat.pdf Jump to: navigation, search File

  20. Hopper File Storage and I/O

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm) HarmonicbetandEnergy 2010 A selectionFile Storage and

  1. Detailed Drawings of NERSC File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management FermiDavid Turner David3Depth ProfilefromRefinement |File

  2. File:Consultants.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to: navigation,Size of this preview:File EditSW NOI

  3. File:Coordination.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to: navigation,Size of this preview:File EditSW NOICoordination.pdf Jump

  4. Transportation and Energy Use Data Files

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality", 2013,Iowa"Dakota"YearProductionShaleInput Product:InputData Files

  5. Core File Settings | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution AndControllingCool MagneticCoos BayCore File Settings

  6. Single File Line, Please! | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9Morgan McCorkleSingin' in the Rain NewsSingle File

  7. Category:Map Files | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:Power LPInformationCashtonGo Back to PVMagnetotellurics asFiles

  8. Franklin File Storage and I/O

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget(DANCE) TargetForms &FrancisEmailFile storage

  9. Storing files in a parallel computing system based on user-specified parser function

    DOE Patents [OSTI]

    Faibish, Sorin; Bent, John M; Tzelnic, Percy; Grider, Gary; Manzanares, Adam; Torres, Aaron

    2014-10-21T23:59:59.000Z

    Techniques are provided for storing files in a parallel computing system based on a user-specified parser function. A plurality of files generated by a distributed application in a parallel computing system are stored by obtaining a parser from the distributed application for processing the plurality of files prior to storage; and storing one or more of the plurality of files in one or more storage nodes of the parallel computing system based on the processing by the parser. The plurality of files comprise one or more of a plurality of complete files and a plurality of sub-files. The parser can optionally store only those files that satisfy one or more semantic requirements of the parser. The parser can also extract metadata from one or more of the files and the extracted metadata can be stored with one or more of the plurality of files and used for searching for files.

  10. An investigation of winter Texans' time usage in the Lower Rio Grande Valley

    E-Print Network [OSTI]

    Marshall, Keith Alan

    1991-01-01T23:59:59.000Z

    will increase. Operational Definitions The following definitions were used to guide this study: ~Win ~rT x ns - Retired persons who stay in the Lower Rio Grande Valley of Texas for at least one month during the Winter. consisting of four counties (Cameron...AN INVESTIGATION OF WINTER TEXANS' TIME USAGE IN THE LOWER RIO GRANDE VALLEY A Thesis by Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE...

  11. Label Building Natural Gas Usage Form 1999 Commercial Buildings Energy Consumption Survey (CBECS)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin:DeploymentSite Name:24,High naturalProsperityNatural Gas Usage

  12. Two methods for characterizing the compaction and ejection behavior of metal powders in a die 

    E-Print Network [OSTI]

    Sajdak, Richard James

    1969-01-01T23:59:59.000Z

    of the compact divided by the ejection load per square inch of the wall surface area of the compact. A~lt*d F Cross Section Area ~E' ' F Wall Surface Area Coefficient of friction Standard chemical abbreviations used throughout. C HAPTER 1 THE POWDER... atmosphere to remove any oxide coating. The powder is blended with a suitable lubricant which is used either to reduce friction or to act as a bonding agent or both. In the compaction process the prepared metal powder is poured into an accurately-made di...

  13. U.S. Geological Survey Open-File Report 02328 Geological Survey of Canada Open File 4350

    E-Print Network [OSTI]

    Goldfinger, Chris

    U.S. Geological Survey Open-File Report 02­328 Geological Survey of Canada Open File 4350 August, University of Victoria, P.O. Box 3055, STN CSC, Victoria, BC, V8W 3P6, Canada #12;ISBN: 0 of Canada and the University of Victoria. This meeting was held at the University of Victoria's Dunsmuir

  14. Optimal Power Procurement and Demand Response with Quality-of-Usage Guarantees

    E-Print Network [OSTI]

    Huang, Longbo; Ramchandran, Kannan

    2011-01-01T23:59:59.000Z

    In this paper, we propose a general operating scheme which allows the utility company to jointly perform power procurement and demand response so as to maximize the social welfare. Our model takes into consideration the effect of the renewable energy and the multi-stage feature of the power procurement process. It also enables the utility company to provide quality-of-usage (QoU) guarantee to the power consumers, which ensures that the average power usage level meets the target value for each user. To maximize the social welfare, we develop a low-complexity algorithm called the \\emph{welfare maximization algorithm} (WMA), which performs joint power procurement and dynamic pricing. WMA is constructed based on a two-timescale Lyapunov optimization technique. We prove that WMA achieves a close-to-optimal utility and ensures that the QoU requirement is met with bounded deficit. WMA can be implemented in a distributed manner and is robust with respect to system dynamics uncertainty.

  15. Usage of Electric Vehicle Supply Equipment Along the Corridors between the EV Project Major Cities

    SciTech Connect (OSTI)

    Mindy Kirkpatrick

    2012-05-01T23:59:59.000Z

    The report explains how the EVSE are being used along the corridors between the EV Project cities. The EV Project consists of a nationwide collaboration between Idaho National Laboratory (INL), ECOtality North America, Nissan, General Motors, and more than 40 other city, regional and state governments, and electric utilities. The purpose of the EV Project is to demonstrate the deployment and use of approximately 14,000 Level II (208-240V) electric vehicle supply equipment (EVSE) and 300 fast chargers in 16 major cities. This research investigates the usage of all currently installed EV Project commercial EVSE along major interstate corridors. ESRI ArcMap software products are utilized to create geographic EVSE data layers for analysis and visualization of commercial EVSE usage. This research locates the crucial interstate corridors lacking sufficient commercial EVSE and targets locations for future commercial EVSE placement. The results and methods introduced in this research will be used by INL for the duration of the EV Project.

  16. Assessment of groundwater usage at Chalk Point power plant. Final report

    SciTech Connect (OSTI)

    Not Available

    1982-07-01T23:59:59.000Z

    In order to quantify the usage of ground water in an operating electric power plant, a study was initiated in 1978 aimed at determining where in the energy conversion process ground water is used and to suggest, if possible, alternate means for providing this water and/or methods to reduce consumption. The Chalk Point Plant was selected for this study because of its difference in fuel source (coal and oil), and because of its high consumption of ground water (approximately 800,000 to 1,200,000 gallons per day). Located at the confluence of the Patuxent River and Swanson Creek in the southeast corner of Prince George's County, Maryland, it consists of three operating units, with a fourth unit under construction during the survey time. (unit 4 has recently become operational). With the cooperation of the Potomac Electric Power Company, the plant was selected for study and was instrumented with several flow meters. Over a two-year period, this plant has been monitored to provide the information needed to make an assessment of the rates, nature, and methods of water usage in an operating power plant.

  17. HPC Usage Behavior Analysis and Performance Estimation with Machine Learning Techniques

    SciTech Connect (OSTI)

    Zhang, Hao [ORNL; You, Haihang [ORNL; Hadri, Bilel [ORNL; Fahey, Mark R [ORNL

    2012-01-01T23:59:59.000Z

    Most researchers with little high performance computing (HPC) experience have difficulties productively using the supercomputing resources. To address this issue, we investigated usage behaviors of the world s fastest academic Kraken supercomputer, and built a knowledge-based recommendation system to improve user productivity. Six clustering techniques, along with three cluster validation measures, were implemented to investigate the underlying patterns of usage behaviors. Besides manually defining a category for very large job submissions, six behavior categories were identified, which cleanly separated the data intensive jobs and computational intensive jobs. Then, job statistics of each behavior category were used to develop a knowledge-based recommendation system that can provide users with instructions about choosing appropriate software packages, setting job parameter values, and estimating job queuing time and runtime. Experiments were conducted to evaluate the performance of the proposed recommendation system, which included 127 job submissions by users from different research fields. Great feedback indicated the usefulness of the provided information. The average runtime estimation accuracy of 64.2%, with 28.9% job termination rate, was achieved in the experiments, which almost doubled the average accuracy in the Kraken dataset.

  18. Spécification pour les stratifiés industriels rigides en planches à base de résines thermodurcissables à usage électriques partie 3: spécifications pour matériaux particuliers : feuille 7: prescriptions pour les stratifiés rigides en planches à base de résine polyimide

    E-Print Network [OSTI]

    Association Française de Normalisation. Paris

    1995-01-01T23:59:59.000Z

    Spécification pour les stratifiés industriels rigides en planches à base de résines thermodurcissables à usage électriques

  19. Electricity from wood powder report on a TPV generator in progress

    SciTech Connect (OSTI)

    Broman, L.; Jarefors, K. [Solar Energy Research Center (SERC), University College of Falun Borlange (UCFB), Box 10044, S-781 10 Borlange (Sweden); Marks, J. [Department of Operational Efficiency, Swedish University of Agricultural Sciences (SLU), Herrgardsv 122, S-776 98 Garpenberg (Sweden); Wanlass, M. [National Renewable Energy Laboratory (NREL), 1617 Cole Blvd., Golden, Colorado 80401-3393, United States of America

    1996-02-01T23:59:59.000Z

    A joint project between NREL, SLU, and UCFB aims at building a wood powder fueled TPV generator. The progress of the project is presented. {copyright} {ital 1996 American Institute of Physics.}

  20. Transient liquid-phase infiltration of a powder-metal skeleton

    E-Print Network [OSTI]

    Lorenz, Adam Michael, 1974-

    2002-01-01T23:59:59.000Z

    Transient Liquid-Phase Infiltration (TLI) is a new method for densifying a powder-metal skeleton that produces a final part of homogeneous composition without significant dimensional change, unlike traditional infiltration ...

  1. Nitrogen adsorption data for the powder form of the PMO shows a diagnostic type IV

    E-Print Network [OSTI]

    Vinnikov, Konstantin

    Nitrogen adsorption data for the powder form of the PMO shows a diagnostic type IV isotherm). This adsorption data together with the d spacing of 4.7 nm given by PXRD provide an independent estimate

  2. Logarithmic Decay in Single-Particle Relaxation of Hydrated Lysozyme Powder

    E-Print Network [OSTI]

    Baglioni, Piero

    We present the self-dynamics of protein amino acids of hydrated lysozyme powder around the physiological temperature by means of molecular dynamics simulations. The self-intermediate scattering functions of the amino acid ...

  3. alloyed fe-mo powder: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  4. alloyed al-ti powders: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

  5. Development of an Experimental Facility for Flame Speed Measurements in Powdered Aerosols 

    E-Print Network [OSTI]

    Vissotski, Andrew John

    2012-10-19T23:59:59.000Z

    Research with heterogeneous mixtures involving solid particulate in closed, constant-volume bombs is typically limited by the powder dispersion technique. This work details the development of an experimental apparatus that promotes ideal conditions...

  6. Luminescence dynamics and waveguide applications of europium doped gallium nitride powder

    E-Print Network [OSTI]

    Lipson, Michal

    Luminescence dynamics and waveguide applications of europium doped gallium nitride powder Carl B, bismuth shot, and europium ingot in an ammonia ambient to initially obtain chunks of the desired material

  7. 11. Working with files in Rhythmyx Lee Bryant v1.3 | 18/06/10

    E-Print Network [OSTI]

    Doran, Simon J.

    11. Working with files in Rhythmyx Lee Bryant v1.3 | 18/06/10 Part One: Uploading a file Lee Bryant v1.3 Part Two: Inserting a link to a file on a page Objectives To insert a link to the file

  8. File system, SaveRestore and Sequencer for LINAC2, DESY2, PETRA3 and FLASH,

    E-Print Network [OSTI]

    File system, SaveRestore and Sequencer for LINAC2, DESY2, PETRA3 and FLASH, a status report Jürgen 4 #12;Basic principle of "Machine file system" disk save rings linacs · `set points' · `read-back' values · position Quads · position Beam · etc. machine file restore More features: ·compare: between file

  9. Two methods for characterizing the compaction and ejection behavior of metal powders in a die

    E-Print Network [OSTI]

    Sajdak, Richard James

    1969-01-01T23:59:59.000Z

    TWO METHODS FOR CHARACTERIZING THE COMPACTION AND EJECTION BEHAVIOR OF METAL POWDERS IN A DIE A Thesis by RICHARD JAMES SAJDAK Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree... of Committee) (Head of Departme t) &ci- (51embor) (Flember) May 1969 ABSTRACT Two Methods for Characterizing the Compaction and Ejection Behavior of Metal Powders In a Die. (May 1969) Richard James Sajdak, B. S. , University of Wyoming M. S. , Texas A...

  10. Heat treatment effects on microstructure and magnetic properties of MnZn ferrite powders

    E-Print Network [OSTI]

    Volinsky, Alex A.

    Heat treatment effects on microstructure and magnetic properties of Mn­Zn ferrite powders Ping Hu Available online 6 September 2009 Keywords: Mn­Zn ferrite Heat treatment Microstructure Magnetic property a b s t r a c t Mn­Zn ferrite powders (Mn0.5Zn0.5Fe2O4) were prepared by the nitrate­citrate auto

  11. Investigation of a high pressure implosive technique for metal powder compaction

    E-Print Network [OSTI]

    Garrett, Donald Richard

    1970-01-01T23:59:59.000Z

    INVESTIGATION OF A HIGH PRESSURE IMPLOSIVE TECHNIQUE FOR METAL POWDER COMPACTION A Thesis DONALD RICHARD GARRETT Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE August 1970 Ma)or Subject: Mechanical Engineering INVESTIGATION OF A HIGH PRESSURE IMPLOSIVE TECHNIQUE FOR METAL POWDER COMPACTION A Thesis by DONALD RICHARD GARRETT Approved as to style and content by: J@l, (Chairman of Committee) (Head...

  12. Chemical vapor deposited diamond-on-diamond powder composites (LDRD final report)

    SciTech Connect (OSTI)

    Panitz, J.K.; Hsu, W.L.; Tallant, D.R.; McMaster, M.; Fox, C.; Staley, D.

    1995-12-01T23:59:59.000Z

    Densifying non-mined diamond powder precursors with diamond produced by chemical vapor infiltration (CVI) is an attractive approach for forming thick diamond deposits that avoids many potential manufacturability problems associated with predominantly chemical vapor deposition (CVD) processes. The authors developed techniques for forming diamond powder precursors and densified these precursors in a hot filament-assisted reactor and a microwave plasma-assisted reactor. Densification conditions were varied following a fractional factorial statistical design. A number of conclusions can be drawn as a result of this study. High density diamond powder green bodies that contain a mixture of particle sizes solidify more readily than more porous diamond powder green bodies with narrow distributions of particle sizes. No composite was completely densified although all of the deposits were densified to some degree. The hot filament-assisted reactor deposited more material below the exterior surface, in the interior of the powder deposits; in contrast, the microwave-assisted reactor tended to deposit a CVD diamond skin over the top of the powder precursors which inhibited vapor phase diamond growth in the interior of the powder deposits. There were subtle variations in diamond quality as a function of the CVI process parameters. Diamond and glassy carbon tended to form at the exterior surface of the composites directly exposed to either the hot filament or the microwave plasma. However, in the interior, e.g. the powder/substrate interface, diamond plus diamond-like-carbon formed. All of the diamond composites produced were grey and relatively opaque because they contained flawed diamond, diamond-like-carbon and glassy carbon. A large amount of flawed and non-diamond material could be removed by post-CVI oxygen heat treatments. Heat treatments in oxygen changed the color of the composites to white.

  13. DATA META FILE 2004 This file describes the instrumentation, field setup, and quality control procedures

    E-Print Network [OSTI]

    Minnesota, University of

    and analyses were supported by the Office of Science (BER), U.S. Department of Energy, Grant No. DE-FG02-03ER - - - 2 DOY - - - 3 DDOY - - - 4 Time (hour/minute) - - - 5 Solar radiation (K) W/m2 Eppley PSP 3.7 m 6 be approximated from the incoming global solar radiation signal by dividing by a factor of 2.1. Data Files

  14. Assessment of the potential of colloidal fuels in future energy usage. Final report. [97 references

    SciTech Connect (OSTI)

    Not Available

    1980-02-25T23:59:59.000Z

    Pulverized coal has been an increasing important source of energy over the past century. Most large utility boilers, all modern coking plants, and many industrial boilers and blast furnaces employ pulverized coal as a major feed stream. In periods of oil shortages, such as during World Wars I and II, the concept of adding powdered coal to oil for use in combustion equipment originally designed for oil has been actively pursued but rarely used. Over this same period of time, there have been attempts to use air suspensions of coal dust in diesel engines in Germany, and in turbines in various countries. The economic advantages to be enjoyed by substitution of powdered coal in oil are not generally realized. Oil costs at $30/bbl represent a fuel value of about $5.00/10/sup 6/ Btu; coal at $25/ton is equivalent to approximately $1.00/10/sup 6/ Btu. Although capital costs for the use of coal are higher than those associated with the use of oil, coal is clearly becoming the least costly fuel. Not only are considerable cost advantages possible, but an improvement in balance of payments and an increase in reliability of fuel supplies are other potential benefits. It is therefore recommended that increased national attention be given to develop these finer grinds of carbonaceous fuels to be used in various suspending fluids. Technical areas where significant additional support appear desirable are described.

  15. Comparison of leading parallel NAS file systems on commodity hardware

    SciTech Connect (OSTI)

    Hedges, R; Fitzgerald, K; Gary, M; Stearman, D M

    2010-11-08T23:59:59.000Z

    High performance computing has experienced tremendous gains in system performance over the past 20 years. Unfortunately other system capabilities, such as file I/O, have not grown commensurately. In this activity, we present the results of our tests of two leading file systems (GPFS and Lustre) on the same physical hardware. This hardware is the standard commodity storage solution in use at LLNL and, while much smaller in size, is intended to enable us to learn about differences between the two systems in terms of performance, ease of use and resilience. This work represents the first hardware consistent study of the two leading file systems that the authors are aware of.

  16. File:02SiteConsiderations (1).pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual1WAALandUsePlanning.pdf Jump to: navigation, search File File history File

  17. File:03TXAStateGeothermalLease.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealandORCEncroachment.pdf Jump to: navigation, search File File history File3TXAStateGeothermalLease.pdf Jump

  18. File:03TXBLandAccess.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealandORCEncroachment.pdf Jump to: navigation, search File File history File3TXAStateGeothermalLease.pdf

  19. File:06UTBStormWaterPermit.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealandORCEncroachment.pdf JumpUTATransportation.pdf Jump to: navigation, search File File history File

  20. File:NREL-asia-dir.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdf Jump to: navigation, search File File history File