Powered by Deep Web Technologies
Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Liquid Sampling-Atmospheric Pressure Glow Discharge (LS-APGD) Ionization Source for Elemental Mass Spectrometry: Preliminary Parametric Evaluation and Figures of Merit  

SciTech Connect (OSTI)

A new, low power ionization source for the elemental analysis of aqueous solutions has recently been described. The liquid sampling-atmospheric pressure glow discharge (LS-APGD) source operates at relatively low currents (<20 mA) and solution flow rates (<50 ?L min-1), yielding a relatively simple alternative for atomic mass spectrometry applications. The LS-APGD has been interfaced to what is otherwise an organic, LC-MS mass analyzer, the Thermo Scientific Exactive Orbitrap without any modifications; other than removing the electrospray ionization (ESI) source supplied with that instrument. A glow discharge is initiated between the surface of the test solution exiting a glass capillary and a metallic counter electrode mounted at a 90į angle and separated by a distance of ~5 mm. As with any plasma-based ionization source, there are key discharge operation and ion sampling parameters that affect the intensity and composition of the derived mass spectra; including signal-to-background ratios. We describe here a preliminary parametric evaluation of the roles of discharge current, solution flow rate, argon sheath gas flow rate, and ion sampling distance as they apply on this mass analyzer system. A cursive evaluation of potential matrix effects due to the presence of easily ionized elements (EIEs) indicate that sodium concentrations of up to 500 ?g mL-1 generally cause suppressions of less than 50%, dependant upon the analyte species. Based on the results of this series of studies, preliminary limits of detection (LOD) have been established through the generation of calibration functions. Whilst solution-based concentrations LOD levels of 0.02 Ė 2 ?g mL-1 3 are not impressive on the surface, the fact that they are determined via discrete 5 ?L injections leads to mass-based detection limits at picogram to singlenanogram levels. The overhead costs associated with source operation (10 W d.c. power, solution flow rates of <50 ?L min-1, and gas flow rates <10 mL min-1) are very attractive. While further optimization in the source design is suggested here, it is believed that the LS-APGD ion source may present a practical alternative to inductively-coupled plasma (ICP) sources typically employed in elemental mass spectrometry.

Quarles, C. Derrick; Carado, Anthony J.; Barinaga, Charles J.; Koppenaal, David W.; Marcus, R. Kenneth

2012-01-01T23:59:59.000Z

2

Electrolytes for power sources  

DOE Patents [OSTI]

Electrolytes are disclosed for power sources, particularly alkaline and acidic power sources, comprising benzene polysulfonic acids and benzene polyphosphonic acids or salts of such acids. 7 figures.

Doddapaneni, N.; Ingersoll, D.

1995-01-03T23:59:59.000Z

3

Figure and finish of grazing incidence mirrors  

SciTech Connect (OSTI)

Great improvement has been made in the past several years in the quality of optical components used in synchrotron radiation (SR) beamlines. Most of this progress has been the result of vastly improved metrology techniques and instrumentation permitting rapid and accurate measurement of the surface finish and figure on grazing incidence optics. A significant theoretical effort has linked the actual performance of components used as x-ray wavelengths to their topological properties as measured by surface profiling instruments. Next-generation advanced light sources will require optical components and systems to have sub-arc second surface figure tolerances. This paper will explore the consequences of these requirements in terms of manufacturing tolerances to see if the present manufacturing state-of-the-art is capable of producing the required surfaces. 15 refs., 14 figs., 2 tabs.

Takacs, P.Z. (Brookhaven National Lab., Upton, NY (USA)); Church, E.L. (Picatinny Arsenal, Dover, NJ (USA). Army Armament Research, Development and Engineering Center)

1989-08-01T23:59:59.000Z

4

Figure 1:Energy Consumption in USg gy p 1E Roberts, Energy in US  

E-Print Network [OSTI]

Figure 1:Energy Consumption in USg gy p 2008 1E Roberts, Energy in US Source: www.eia.gov #12 National Academy of Science 2009 #12;Figure 8: US Production of Primary Energy by Fuel 8E Roberts, Energy Consumption and Production 13E Roberts, Energy in US EIA Annual Energy Outlook 2012 #12;Figure 14: Oil Price

Sutton, Michael

5

SOURCE?  

Energy Savers [EERE]

Department of Energy (DOE) in partnership with Lawrence Berkeley National Laboratory (LBNL), is an open-source code package designed to be a common, low-cost, standardized tool...

6

Microsoft Word - figure_14.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042 Figure

7

PHOBOS Experiment: Figures and Data  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

PHOBOS consists of many silicon detectors surrounding the interaction region. With these detectors physicists can count the total number of produced particles and study the angular distributions of all the products. Physicists know from other branches of physics that a characteristic of phase transitions are fluctuations in physical observables. With the PHOBOS array they look for unusual events or fluctuations in the number of particles and angular distribution. The articles that have appeared in refereed science journals are listed here with separate links to the supporting data plots, figures, and tables of numeric data.† See also supporting data for articles in technical journals at http://www.phobos.bnl.gov/Publications/Technical/phobos_technical_publications.htm and from conference proceedings at http://www.phobos.bnl.gov/Publications/Proceedings/phobos_proceedings_publications.htm

The PHOBOS Collaboration

8

Les figures acoustiques de Chladni. Figures acoustiques de Chladni Ernst Chladni ( 1756-1827) Figures acoustiques de Chladni 1787  

E-Print Network [OSTI]

Les figures acoustiques de Chladni. Figures acoustiques de Chladni Ernst Chladni ( 1756-1827) Figures acoustiques de Chladni 1787 Comme les cordes vibrantes, les plaques peuvent vibrer à différentes phénomène a été découvert par le physicien E. Chladni. Pour cela il fait vibrer à l'aide d'un archet une

d'Orléans, Université

9

BILIWG: Consistent "Figures of Merit" (Presentation)  

Broader source: Energy.gov (indexed) [DOE]

BILIWG: Consistent "Figures of Merit" A finite set of results reported in consistent units * To track progress of individual projects on a consistent basis * To enable comparing...

10

EIA - Greenhouse Gas Emissions - Table-Figure Notes and Sources  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import96 4.87CBECS Public Use Data03. U.S. EIA4. Nitrous OxideA1.

11

RELEVANT SPECTROSCOPIC DATA Figure A.1: 1  

E-Print Network [OSTI]

, 25¬įC, 499.85 MHz) of 1iPr Figure A.12: 1 H NMR Spectrum (C6D6, 70¬įC, 499.85 MHz) of 1iPr Figure A.13: 13 C{1 H} NMR Spectrum (C6D6, 25¬įC, 125.70 MHz) of 1iPr #12;228 Figure A.14: 31 P{1 H} NMR Spectrum (C6D6, 25¬įC, 121.48 MHz) of 1iPr #12;229 Figure A.15: 1 H-13 C HSQC NMR Spectrum (C6D6, 25¬įC, 499

Winfree, Erik

12

Supplementary Figure legends Supplementary Figure 1: Long term follow up of changing hair cycle domains on  

E-Print Network [OSTI]

Supplementary Figure legends Supplementary Figure 1: Long term follow up of changing hair cycle to trace the temporal changes of hair cycle domains. Pictures were taken every 2-3 days and selective ones are shown here. In normal pigmented mice, similar hair cycle domains can be revealed by simple hair clipping

Maini, Philip K.

13

Figure legends Figure 1: Normalized radiance spectra of the different experimental color  

E-Print Network [OSTI]

treatment groups. The fluorescent (red) line represents the narrow rearing treatment. The 5500K (green) and 10000K (blue) lines represent the two bulb types used. #12;Figure S4: Behavioral predictive model performance for the broad-spectrum

Carleton, Karen L.

14

Figure correction of multilayer coated optics  

DOE Patents [OSTI]

A process is provided for producing near-perfect optical surfaces, for EUV and soft-x-ray optics. The method involves polishing or otherwise figuring the multilayer coating that has been deposited on an optical substrate, in order to correct for errors in the figure of the substrate and coating. A method such as ion-beam milling is used to remove material from the multilayer coating by an amount that varies in a specified way across the substrate. The phase of the EUV light that is reflected from the multilayer will be affected by the amount of multilayer material removed, but this effect will be reduced by a factor of 1-n as compared with height variations of the substrate, where n is the average refractive index of the multilayer.

Chapman; Henry N. (Livermore, CA), Taylor; John S. (Livermore, CA)

2010-02-16T23:59:59.000Z

15

Figure ES1. Map of Northern Alaska  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31 705PC'sFigure ES1. Map

16

Figure and finish characterization of high performance metal mirrors  

SciTech Connect (OSTI)

Most metal mirrors currently used in synchrotron radiation (SR) beam lines to reflect soft x-rays are made of electroless nickel plate on an aluminum substrate. This material combination has allowed optical designers to incorporate exotic cylindrical aspheres into grazing incidence x-ray beam-handling systems by taking advantage of single-point diamond machining techniques. But the promise of high-quality electroless nickel surfaces has generally exceeded the performance. We will examine the evolution of electroless nickel surfaces through a study of the quality of mirrors delivered for use at the National Synchrotron Light Source over the past seven years. We have developed techniques to assess surface quality based on the measurement of surface roughness and figure errors with optical profiling instruments. It is instructive to see how the quality of the surface is related to the complexity of the machine operations required to produce it.

Takacs, P.Z. [Brookhaven National Lab., Upton, NY (United States); Church, E.L. [Army Armament Research and Development Command, Dover, NJ (United States)

1991-10-01T23:59:59.000Z

17

Surface figure control for coated optics  

DOE Patents [OSTI]

A pedestal optical substrate that simultaneously provides high substrate dynamic stiffness, provides low surface figure sensitivity to mechanical mounting hardware inputs, and constrains surface figure changes caused by optical coatings to be primarily spherical in nature. The pedestal optical substrate includes a disk-like optic or substrate section having a top surface that is coated, a disk-like base section that provides location at which the substrate can be mounted, and a connecting cylindrical section between the base and optics or substrate sections. The optic section has an optical section thickness.sup.2 /optical section diameter ratio of between about 5 to 10 mm, and a thickness variation between front and back surfaces of less than about 10%. The connecting cylindrical section may be attached via three spaced legs or members. However, the pedestal optical substrate can be manufactured from a solid piece of material to form a monolith, thus avoiding joints between the sections, or the disk-like base can be formed separately and connected to the connecting section. By way of example, the pedestal optical substrate may be utilized in the fabrication of optics for an extreme ultraviolet (EUV) lithography imaging system, or in any optical system requiring coated optics and substrates with reduced sensitivity to mechanical mounts.

Ray-Chaudhuri, Avijit K. (Livermore, CA); Spence, Paul A. (Pleasanton, CA); Kanouff, Michael P. (Livermore, CA)

2001-01-01T23:59:59.000Z

18

Figure 8. Technically Recoverable and Commercially Developable...  

U.S. Energy Information Administration (EIA) Indexed Site

the Alaska North Slope fig8.jpg (38547 bytes) Source: United States Geological Survey, "Economics of Undiscovered Oil in the 1002 Area of the Arctic National Wildlife Refuge," 1998...

19

Chladni figures in Andreev billiards F. Libisch 1  

E-Print Network [OSTI]

Chladni figures in Andreev billiards F. Libisch 1 , S. Rotter, and J. Burgd¨orfer Institute of the wavefunctions in the electron and hole sheet. We identify cases where the Chladni figures for the electrons of the retroreflection picture. 1 Introduction When Ernst Chladni first studied the formation of nodal patterns

Florian, Libisch

20

Computing the Antipenumbra of an Area Light Source  

E-Print Network [OSTI]

to be in umbra. If the point sees some, but not all, of the light source, it is said to be in penumbra. Otherwise, the point may see all of the light source. light source occluder umbra penumbra Figure 1: Umbra and penumbra, of the light source can be seen (Figure 2). For a given light source and set of holes or occluders, the umbra

Teller, Seth

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Supplemental Figures: Figure S1. Analysis of endo-siRNA targets in different microarray datasets. The  

E-Print Network [OSTI]

Supplemental Figures: Figure S1. Analysis of endo-siRNA targets in different microarray datasets. The percentage of each array dataset that were predicted endo-siRNA targets according to the Ambros dataset (Lee et al. 2006) was plotted [(number of endo-siRNA targets in microarray dataset / total genes

Bass, Brenda L.

22

Correctness of depiction in planar diagrams of spatial figures  

E-Print Network [OSTI]

We show that it is possible to decide whether a given planar diagram correctly depicts the spatial figure consisting of a planar quadrangle together with its shadow in another plane.

P. L. Robinson

2014-03-12T23:59:59.000Z

23

Supplementary Figure 1 SHAPE-MaP data analysis pipeline.  

E-Print Network [OSTI]

Supplementary Figure 1 SHAPE-MaP data analysis pipeline. Outline of software pipeline that fully.1 GHz Intel Core i7 and 16 GB RAM). This strategy is implemented in the SHAPE-MaP Folding Pipeline

Cai, Long

24

Figure 7.1. Control of an alarm system. Figure 7.2. A simple memory element.  

E-Print Network [OSTI]

-digit BCD counter. Enable Q0 Q1 Q2 D0 D1 D2 Load Clock 1 0 0 0 Clock Q30 D3 Enable Q0 Q1 Q2 D0 D1 D2 Load Clock 0 0 0 Q30 D3 BCD0 BCD1 Clear Figure 7.30. Johnson counter. D Q Q Clock D Q Q D Q Q Q0 Q1 Qn 1 by CAD tools. Data Clock Latch #12;Figure 7.34. Timing simulation of storage elements. Figure 7.35. Code

Kalla, Priyank

25

Figures of the World Healthcare Organisation show that stroke  

E-Print Network [OSTI]

Figures of the World Healthcare Organisation show that stroke is currently the leading cause disabilities following a stroke, the economic burden and shortage of rehabilitation therapists are also developed a robotic exoskeleton system that meets the requirements of effective post-stroke upper

26

Figure 2 Analysis Tool Interface Level-1 / PBBT Analysis Tool  

E-Print Network [OSTI]

Figure 2 ­ Analysis Tool Interface Level-1 / PBBT Analysis Tool Introduction The Level-1/PBBT Analysis Tool (LPAT) was designed to assist in the analysis of North American Standard Level-1 Inspection. The data incorporated into the tool includes the results of Level-1 inspections with accompanying PBBT test

27

Forces on a magnet moving past figure-eight coils  

SciTech Connect (OSTI)

For the first time, the lift, drag, and guidance forces acting on a permanent magnet are measured as the magnet passes over different arrays of figure-eight (null-flux) coils. The experimental results are in good agreement with the predictions of dynamic circuit theory, which is used to explain more optimal coil arrays.

Mulcahy, T.H.; He, Jianliang; Rote, D.M. [Argonne National Lab., IL (United States); Rossing, T.D. [Northern Illinois Univ., De Kalb, IL (United States). Dept. of Physics

1993-03-01T23:59:59.000Z

28

Forces on a magnet moving past figure-eight coils  

SciTech Connect (OSTI)

For the first time, the lift, drag, and guidance forces acting on a permanent magnet are measured as the magnet passes over different arrays of figure-eight (null-flux) coils. The experimental results are in good agreement with the predictions of dynamic circuit theory, which is used to explain more optimal coil arrays.

Mulcahy, T.H.; He, Jianliang; Rote, D.M. (Argonne National Lab., IL (United States)); Rossing, T.D. (Northern Illinois Univ., De Kalb, IL (United States). Dept. of Physics)

1993-01-01T23:59:59.000Z

29

SupplementalFigures1 Supplementary Figure S1: Sample Mean Excess (SME) for a range of thresholds at the grid point closest to 3  

E-Print Network [OSTI]

SupplementalFigures1 2 Supplementary Figure S1: Sample Mean Excess (SME) for a range of thresholds at the grid point closest to 3 Bergen, Norway in the BCMHIRHAM5 downscaling. The SME

Meskhidze, Nicholas

30

NOvA (Fermilab E929) Official Plots and Figures  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The NOvA collaboration, consisting of 180 researchers across 28 institutions and managed by the Fermi National Accelerator Laboratory (FNAL), is developing instruments for a neutrino-focused experiment that will attempt to answer three fundamental questions in neutrino physics: 1) Can we observe the oscillation of muon neutrinos to electron neutrinos; 2) What is the ordering of the neutrino masses; and 3) What is the symmetry between matter and antimatter? The collaboration makes various data plots and figures available. These are grouped under five headings, with brief descriptions included for each individual figure: Neutrino Spectra, Detector Overview, Theta12 Mass Hierarchy CP phase, Theta 23 Delta Msqr23, and NuSterile.

31

Patterned Fabric Know - How (Plaids, Stripes, Checks, and Figured Designs).  

E-Print Network [OSTI]

DC \\1\\245.7 '13 Fbiterned Fabric mow-Kbw Contents Design Principles and Patterned Fabrics Pattern Selection Fabric Construction Selecting and Preparing Fabric Kinds of Plaids and Stripes Pri nts Other Patterned Fabrics Combining..., Stripes, Checks and Figured Designs) Extension Clothing Specialists The Texas A&M University System Patterned fabrics provide an interesting di mension to anyone's wardrobe. In a garment or as an accent, patterned fabrics are colorful and ex citing...

Anoymous,

1984-01-01T23:59:59.000Z

32

GEOLOGY, January 2007 1 GSA Data Repository item 2007010, Figures  

E-Print Network [OSTI]

GEOLOGY, January 2007 1 1 GSA Data Repository item 2007010, Figures DR1A (photo of speleothem PP1 and methods for uranium-series chronology), and DR2, (18 O and 13 C data), is available online at www 9140, Boulder, CO 80301, USA. Geology, January 2007; v. 35; no. 1; p.1­4; doi: 10.1130/G22865A.1; 3

Massachusetts at Amherst, University of

33

Nuclear Detection Figure Of Merit (NDFOM) Version 1.2 User's Guide  

SciTech Connect (OSTI)

NDFOM is a detector database and detector evaluation system, accessible as a web service. It runs on the same server as the Patriot service, but uses port 8081. In this user's guide, we will use the example case that the patriot service is running on http://patriot.lanl.gov. Then the NDFOM service would be accessible at the URL http://patriot.lanl.gov:8081/ndfom. In addition to local server installations, common server locations are 1) a patriot server running on a virtual machine (use the virtual machine URL with :8081/ndfom), and 2) a patriot server running on a local machine (use http://localhost:8081/ndfom or http://127.0.0.1:8081/ndfom). The home screen provides panels to select detectors, a scenario, and a figure-of-merit. It also has an 'analyze' button, which will evaluate the selected figure-of-merit for the selected detectors, for the scenario selected by the user. The detector effectiveness evaluations are presented through the browser in a ranked list of detectors. The user does not need to log in to perform analysis with pre-supplied detectors, scenarios, and FOMs. The homepage view is shown in Figure 1. The first panel displays a list of the detectors in the current detector database. The user can select one, some, or all detectors to evaluate. On the right of each listed detector, there is a star icon. Clicking that icon will open a panel that displays the details about that detector, such as detector material, dimensions, thresholds, etc. The center panel displays the pre-supplied scenarios that are in the database. A scenario specifies the source of interest, the spectrum of the radiation, the background radiation spectrum, the distance or distance of closest approach, the allowable false positive rate, and the dwell time or speed. Scenario details can be obtained by clicking the star to the right of a scenario. A scenario can be selected by clicking it.

Stroud, Phillip D [Los Alamos National Laboratory; Dufresne, Thomas A. [Los Alamos National Laboratory

2012-08-27T23:59:59.000Z

34

ProClim-Flash | No 57, June 201318 Figure 1: Swiss CH4 fluxes from (a) anthropogenic (agriculture, energy, waste) and (b) natural contributors (wetlands, lakes and  

E-Print Network [OSTI]

April 2013 under the United Nations Framework Convention on Climate Change and under the Kyoto Protocol layers representing CH4 emissions from wastewater treatment and natural sources and sinks (Figure 1b by the CCES projects ENHANCE, www.cces.ethz.ch/ projects/sulu/ENHANCE, and BioChange, www.cces.ethz.ch/projects/clench/BioChange

35

ENGR 3502 Open Source Humanoid Robots Instructor permission only you need to request permission in SIS and provide the information  

E-Print Network [OSTI]

, design and 3D- print a "body", figure out the Linux open-source C++ framework and make the robot do

Acton, Scott

36

Figure 1: IPA symbols [wikipedia]. Unvoiced Consonants Voiced Consonants Vowels  

E-Print Network [OSTI]

Figure 1: IPA symbols [wikipedia]. Unvoiced Consonants Voiced Consonants Vowels Example Dbet IPA/at H √Ľ Example Dbet IPA /th/is D D /b/ee b b /d/og d d /g/ab g g /j/udge J √? /l/ook l l /m/an m m /n/ap n n /r/eal r r plea/s/ure Z Z si/ng/ G N /v/ow v v /w/in w w /y/ou y j /z/oo z z Example Dbet IPA L

Allen, Jont

37

Figure ES6. Fuel Economy Effects on Annual Energy Growth  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31ES5 Figure ES5.

38

Fermilab E866 (NuSea) Figures and Data Plots  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The NuSea Experiment at Fermilab studied the internal structure of protons, in particular the difference between up quarks and down quarks. This experiment also addressed at least two other physics questions: nuclear effects on the production of charmonia states (bound states of charm and anti-charm quarks) and energy loss of quarks in nuclei from Drell-Yan measurements on nuclei. While much of the NuSea data are available only to the collaboration, figures, data plots, and tables are presented as stand-alone items for viewing or download. They are listed in conjunction with the published papers, theses, or presentations in which they first appeared. The date range is 1998 to 2008. To see these figures and plots, click on E866 publications or go directly to http://p25ext.lanl.gov/e866/papers/papers.html. Theses are at http://p25ext.lanl.gov/e866/papers/e866theses/e866theses.html and the presentations are found at http://p25ext.lanl.gov/e866/papers/e866talks/e866talks.html. Many of the items are postscript files.

E866 NuSea Collaboration

39

The effect of a multivalley energy band structure on the thermoelectric figure of merit  

E-Print Network [OSTI]

value of the thermoelectric figure of merit Z than a similar material which has only a single valleyL-49 The effect of a multivalley energy band structure on the thermoelectric figure of merit D. M A comparison is drawn between the dimensionless thermoelectric figure of merit of a multivalleyed semiconductor

Boyer, Edmond

40

Ion source based on the cathodic arc  

DOE Patents [OSTI]

A cylindrically symmetric arc source to produce a ring of ions which leave the surface of the arc target radially and are reflected by electrostatic fields present in the source to a point of use, such as a part to be coated, is described. An array of electrically isolated rings positioned in the source serves the dual purpose of minimizing bouncing of macroparticles and providing electrical insulation to maximize the electric field gradients within the source. The source also includes a series of baffles which function as a filtering or trapping mechanism for any macroparticles. 3 figures.

Sanders, D.M.; Falabella, S.

1994-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

STAR (Solenoidal Tracker at RHIC) Figures and Data  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The primary physics task of STAR is to study the formation and characteristics of the quark-gluon plasma (QGP), a state of matter believed to exist at sufficiently high energy densities. STAR consists of several types of detectors, each specializing in detecting certain types of particles or characterizing their motion. These detectors work together in an advanced data acquisition and subsequent physics analysis that allows final statements to be made about the collision. The STAR Publications page provides access to all published papers by the STAR Collaboration, and many of them have separate links to the figures and data found in or supporting the paper. See also the data-rich summaries of the research at http://www.star.bnl.gov/central/physics/results/. [See also DDE00230

The STAR Collaboration

42

BRAHMS (Broad Range Hadron Magnetic Spectrometer) Figures and Data Archive  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The BRAHMS experiment was designed to measure charged hadrons over a wide range of rapidity and transverse momentum to study the reaction mechanisms of the relativistic heavy ion reactions at the Relativistic Heavy Ion Collider at Brookhaven National Laboratory and the properties of the highly excited nuclear matter formed in these reactions. The experiment took its first data during the RHIC 2000 year run and completed data taking in June 2006. The BRAHMS archive makes publications available and also makes data and figures from those publications available as separate items. See also the complete list of publications, multimedia presentations, and related papers at http://www4.rcf.bnl.gov/brahms/WWW/publications.html

43

Figure 7. Projected Production for the High Development Rate...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Rate of Technically Recoverable Oil Estimated at 5 Percent, Mean, and 95 Percent Probabilities for the ANWR Coastal Plain of the Alaska North Slope fig7.jpg (43335 bytes) Source...

44

LIST OF FIGURES ................ . . . . ...... v LIST OF TABLES ................ ...................... vii  

E-Print Network [OSTI]

........................... 37 8. A SAMPLE CALCULATION OF WATER SOURCE HEAT PUMP ANNUAL PERFORMANCE FACTORS .................................................. ....... 11 5.1 Heating Mode Steady-State Tests .................................. ...... 11 5.2 Heating Mode Steady-State Tests with Inlet Air Humidity as the Parameter

Oak Ridge National Laboratory

45

figures for inverse problem paper in 3d - Department of Mathematics ...  

E-Print Network [OSTI]

FIGURES FOR INVERSE PROBLEM PAPER IN 3D. JUAN E. SANTOS. Departamento de Geof sica Aplicada, Facultad de Ciencias Astron omicas y Geof sicas,.

santos

1910-20-20T23:59:59.000Z

46

Thermal Conductivity Reduction and Thermoelectric Figure of Merit Increase by Embedding Nanoparticles in Crystalline Semiconductors  

E-Print Network [OSTI]

on the thermoelectric figure of merit (ZT) of a material defined as ZT S2 T=k, where S, , k, and T are the Seebeck by nanostructuring thermoelectric materials, and the key reason for increase in ZT was the reduction of thermalThermal Conductivity Reduction and Thermoelectric Figure of Merit Increase by Embedding

47

Foreign Fishery Developments Figure I.-The People's Republic of China.  

E-Print Network [OSTI]

Foreign Fishery Developments Figure I.-The People's Republic of China. Figure 2.-China's total 1983 harvest. China's fisheries catch increased sig- nificantly after its fishery development policy and freshwater aquaculture. China hopes to realize the full potential of its fisheries by continuing to implement

48

23 Figure 3.1: Color transition from purple/maroon argillites into bright red  

E-Print Network [OSTI]

;#12;#12;#12;#12;#12;#12;#12;#12;23 Figure 3.1: Color transition from purple/maroon argillites into bright red argillites. This transition weathering, possibly sideritic layer in the lower part of the picture. The fine grained overlying red Island Section, lower maroon and purple part in red unit (level: 9 meter; Figure 3.3); south shore Gull

Kidd, William S. F.

49

Technology Transfer award funding data* Figure 1. Current Technology Transfer awards  

E-Print Network [OSTI]

6 1 4 3 48 23 30 10 Technology Transfer award funding data* Figure 1. Current Technology Transfer awards Numbers represent active grants as at 1 October 2013 Figure 2. Technology Transfer award Transfer funding division. In the 2012/13 financial year Technology Transfer approved awards worth a total

Rambaut, Andrew

50

Large source test stand for H/sup -/(D/sup -/) ion source  

SciTech Connect (OSTI)

The Brookhaven National Laboratory Neutral Beam Group has constructed a large source test stand for testing of the various source modules under development. The first objective of the BNL program is to develop a source module capable of delivering 10A of H/sup -/(D/sup -/) at 25 kV operating in the steady state mode with satisfactory gas and power efficiency. The large source test stand contains gas supply and vacuum pumping systems, source cooling systems, magnet power supplies and magnet cooling systems, two arc power supplies rated at 25 kW and 50 kW, a large battery driven power supply and an extractor electrode power supply. Figure 1 is a front view of the vacuum vessel showing the control racks with the 36'' vacuum valves and refrigerated baffles mounted behind. Figure 2 shows the rear view of the vessel with a BNL Mk V magnetron source mounted in the source aperture and also shows the cooled magnet coils. Currently two types of sources are under test: a large magnetron source and a hollow cathode discharge source.

Larson, R.; McKenzie-Wilson, R.

1981-01-01T23:59:59.000Z

51

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits is disclosed. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and eliminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an excellent moderate-priced X-ray source for lithography. 26 figures.

Piestrup, M.A.; Boyers, D.G.; Pincus, C.

1991-12-31T23:59:59.000Z

52

Supporting Figures and Tables Sources: Data for the tables and graphs in this appendix were aggregated from the individual  

E-Print Network [OSTI]

: Utility Electricity Savings Goals Compared to 2016 Consumption 2007 2016 2007 2016 MWh % Publicly Owned,204 36,056 25% Pittsburg Power/ Island Energy 178 1,777 17,845 21,326 1,777 51% 8% 2,133 (356) -17% Plumas Sierra 621 6,209 168,486 202,378 6,209 18% 3% 20,238 (14,029) -69% Port of Oakland 884 8,837 81

53

Advanced Light Source Activity Report 1997/1998  

SciTech Connect (OSTI)

This Lawrence Berkeley National Laboratory, Advanced Light Source (ALS) activity report for 1997/98 discusses the following topics: Introduction and Overview; Science Highlights; Facility Report; Special Events; ALS Advisory Panels 1997/98; ALS Staff 1997/98 and Facts and Figures for the year.

Greiner, Annette (ed.)

1999-03-01T23:59:59.000Z

54

Ion source for high-precision mass spectrometry  

DOE Patents [OSTI]

The invention is directed to a method for increasing the precision of positive-ion relative abundance measurements conducted in a sector mass spectrometer having an ion source for directing a beam of positive ions onto a collimating slit. The method comprises incorporating in the source an electrostatic lens assembly for providing a positive-ion beam of circular cross section for collimation by the slit. 2 figures, 3 tables.

Todd, P.J.; McKown, H.S.; Smith, D.H.

1982-04-26T23:59:59.000Z

55

ECR ion source with electron gun  

DOE Patents [OSTI]

An Advanced Electron Cyclotron Resonance ion source having an electron gun for introducing electrons into the plasma chamber of the ion source is described. The ion source has a injection enclosure and a plasma chamber tank. The plasma chamber is defined by a plurality of longitudinal magnets. The electron gun injects electrons axially into the plasma chamber such that ionization within the plasma chamber occurs in the presence of the additional electrons produced by the electron gun. The electron gun has a cathode for emitting electrons therefrom which is heated by current supplied from an AC power supply while bias potential is provided by a bias power supply. A concentric inner conductor and outer conductor carry heating current to a carbon chuck and carbon pusher which hold the cathode in place and also heat the cathode. In the Advanced Electron Cyclotron Resonance ion source, the electron gun replaces the conventional first stage used in prior electron cyclotron resonance ion generators. 5 figures.

Xie, Z.Q.; Lyneis, C.M.

1993-10-26T23:59:59.000Z

56

Graffiti (Figural)  

E-Print Network [OSTI]

2004 Middle Egyptian Quarries Project: 2004 field season.flat space available. In quarries and in way-stops onwith further study is the quarry of Abdel Qurna just north

Cruz-Uribe, Eugene

2008-01-01T23:59:59.000Z

57

Graffiti (Figural)  

E-Print Network [OSTI]

rock inscriptions 1 - 45 and Wadi el-HŰl rock inscriptionsVI: Die Felsinschriften des Wadi Hil‚l. Brussels: Brepols.

Cruz-Uribe, Eugene

2008-01-01T23:59:59.000Z

58

Figure 2  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2.Reformulated,826 detailed data The7"Liquids

59

Figure 3  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2.Reformulated,826 detailed data

60

Figure 4  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2.Reformulated,826 detailed data4.703,3128.624,31006

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Figure 5  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2.Reformulated,826 detailed data4.703,3128.624,31006554,904,209434

62

Figure 6  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2.Reformulated,826 detailed data4.703,3128.624,31006554,904,2094344.6

63

Facts, Figures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial ThinFOR IMMEDIATE5FacilitiesFacilityAbout ¬Ľ Facts,

64

* All figures are in color on the Coastal Sediments Proceedings DVD. NONUNIFORM SEDIMENT TRANSPORT MODELING AT  

E-Print Network [OSTI]

1783 * All figures are in color on the Coastal Sediments Proceedings DVD. NONUNIFORM SEDIMENT@ncche.olemiss.edu. Abstract: A depth-averaged two-dimensionalnonuniform sediment transport model is applied to the beaches. The sediment transport, bed change and sorting equations are solved simultaneously and implicitly at the same

US Army Corps of Engineers

65

3-19 Urban Design Figure 3-9 Aerial View E Looking West  

E-Print Network [OSTI]

View F Looking North West #12;3-21 Urban Design Figure 3-11 Skyline and Massachusetts Avenue Gateway to careful site planning and transportation demand management. As the area has become more densely developed employed by TranSComm whose primary responsibilities include identifying and responding to transportation

Mohanty, Raj

66

IN PRINT (Feb. 2012): Am J Psych Word length: 3,983 Tables: 2, Figures: 4  

E-Print Network [OSTI]

in individuals with autism as early as two years of age. Studies using head circumference suggest that brainIN PRINT (Feb. 2012): Am J Psych Word length: 3,983 Tables: 2, Figures: 4 Brain Volume Findings Neurological Institute, McGill University *IBIS Network: The IBIS (Infant Brain Imaging Study) Network

Utah, University of

67

Enhancement of thermoelectric figure-of-merit by resonant states of aluminium doping in lead selenide  

E-Print Network [OSTI]

By adding aluminium (Al) into lead selenide (PbSe), we successfully prepared n-type PbSe thermoelectric materials with a figure-of-merit (ZT) of 1.3 at 850 K. Such a high ZT is achieved by a combination of high Seebeck ...

Zhang, Qinyong

68

Figure 1. Elevation View of TPX Core including IR TV locations and view of plasma  

E-Print Network [OSTI]

stabilizer plates PPPL-3130 - Preprint Date: August 1995 TPX Diagnostics for Tokamak Operation, Plasma. First plasma is scheduled for mid-2001. Diagnostics are required for real time plasma control, physicsFigure 1. Elevation View of TPX Core including IR TV locations and view of plasma through

69

Figure 1: ATA 42 antenna array at Hat Creek ********ADAPTIVE REAL TIME IMAGING FOR RADIO ASTRONOMY*******  

E-Print Network [OSTI]

Figure 1: ATA 42 antenna array at Hat Creek ********ADAPTIVE REAL TIME IMAGING FOR RADIO ASTRONOMY --------------------------¬≠ ¬∑ Astronomers primarily interested in astronomy. ¬≠ Data reduction preoccupies radio astronomy specialists,f,p Bandpass( )f PolCal( )f,p Gains( )s,f,p S Beam Imager Astronomy Solver I2 ( ) )^(^, 2sVpfV - √• ¬Ļkj X Solver

Militzer, Burkhard

70

Figure 1: Sample COLLATE documents Automatic Annotation of Historical Paper Documents  

E-Print Network [OSTI]

devoted to the management of such annotated documents. The challenge comes from the low layout qualityFigure 1: Sample COLLATE documents Automatic Annotation of Historical Paper Documents S. Ferilli, L classification and labelling of documents. Furthermore, we also discuss the advantages obtained by exploiting

Di Mauro, Nicola

71

The figure shows the current energy pay back time for PV  

E-Print Network [OSTI]

, Senior researcher at Utrecht University, The Netherlands "We found that today's PV systems have an energy statement is: "The energy balance of solar PV is clearly positive today and will further improveThe figure shows the current energy pay back time for PV systems using different cell technologies

72

Figure 1. Bipartite network showing how candidate SNPs co-occur across Colombian  

E-Print Network [OSTI]

Figure 1. Bipartite network showing how candidate SNPs co-occur across Colombian patients with one Study of Chronic Metabolic Diseases in Colombians Maria A. Caro MSc1,2 , Bryant Dang BS1 , Gabriel, are associated with key demographic and clinical variables in Colombians with metabolic disease. The results

Bhavnani, Suresh K.

73

NANOTECHNOLOGY 4 NOVEMBER 2004 Figure 1. A `quasi-optical' electron paramagnetic resonance (EPR)  

E-Print Network [OSTI]

NANOTECHNOLOGY 4 NOVEMBER 2004 Figure 1. A `quasi-optical' electron paramagnetic resonance (EPR) spectrometer. EPR: Progress towards spin-based quantum computing Electron- and/or nuclear-spin-based quantum-dependent recombination (SDR)1-4 is an electron paramagnetic resonance (EPR) technique that is potentially useful in spin

Demirel, Melik C.

74

Keywords: Photovoltaic System, fault-tolerance, recon-figurable PV panel  

E-Print Network [OSTI]

plants, and satellites. The output power of a PV cell (also called solar cell) is dependent on the solar: naehyuck@elpl.snu.ac.kr). output power of a PV cell increases as solar irradiance increases and temperature irradiance level and temperature. Figure 1 shows PV cell output current-voltage and power

Pedram, Massoud

75

11th International Symposium on Unmanned Untethered Submersible Technology August 1999 Figure 1 SAUV Engineering Prototype  

E-Print Network [OSTI]

broken down into three distinct concerns:the effects of biofouling on the power output of the solar 100 BiofoulAreaCoverage(%) SolarPanelPowerOutput(%) 0 10 20 30 40 Time in Days Solar Panel Worst Case power out Figure 2: Solar Panel Bio-fouled Area and Power Output versus Time -30 -20 -10 0 10 20 30 Perc

76

Science Highlight October 2010 Figure 1. Schematic process for the fabrication  

E-Print Network [OSTI]

in the past, there is still a need for a low-cost, large-area compatible technology for the productionScience Highlight ­ October 2010 Figure 1. Schematic process for the fabrication of micro. While promising routes towards stretchable matrix- type substrates[1] and electrodes[2] were developed

Wechsler, Risa H.

77

Figure 1. Schematic of initial air pump design Design of Air Pump System Using Bond Graph  

E-Print Network [OSTI]

, is presented in Figure 1. It is a vibratory pump in which an electromagnetic circuit drives a small permanent magnet attached to a pivoted lever that, in turn, drives a rubber bellows pump. The bellows pump has of the cascaded arrangement of three coupled subsystems: the electromagnetic actuator, the lever, and the air

Fernandez, Thomas

78

Figure 1: Multiplex logarithmic microfluidic perfusion array for probing shear stress effects on stem cells. (A)  

E-Print Network [OSTI]

Figure 1: Multiplex logarithmic microfluidic perfusion array for probing shear stress effects on stem cells. (A) Microfluidic perfusion systems exhibit more defined shear stress profiles and consume. (B) A 1x6 multiplex logarithmic microfluidic array for simultaneous application of shear stress

Voldman, Joel

79

High figure-of-merit nematic mixtures based on totally unsaturated isothiocyanate liquid crystals  

E-Print Network [OSTI]

. 1. Introduction The continuous demand for faster electro-optic response times is the driving force of figure-of-merit were observed at room temperature for the formulated nematic mixtures. Potential phased arrays (OPAs) for laser communications, require faster response times. In order to achieve a fast

Wu, Shin-Tson

80

Figure 1. Recurrent modular network architecture Recurrent modular network architecture for sea ice  

E-Print Network [OSTI]

Figure 1. Recurrent modular network architecture Recurrent modular network architecture for sea ice classification in the Marginal Ice Zone using ERS SAR images Andrey V. Bogdanov1a , Marc Toussaint1b , Stein of SAR images of sea ice. Additionally to the local image information the algorithm uses spatial context

Toussaint, Marc

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Waste Incineration in China page 1 Figure 1: Visit to MWI in Harbin  

E-Print Network [OSTI]

of hard coal is also wide-spread. The flue gas cleaning is done using dry or semi dry systemsWaste Incineration in China page 1 Figure 1: Visit to MWI in Harbin Waste Incineration in China Balz Solenthaler, Rainer Bunge Summary China currently operates 19 municipal waste incinerators (MWI

Columbia University

82

Supplemental Figures Supplemental Figure1  

E-Print Network [OSTI]

) induced a gradual change in firing patterns, eventually leading to self-sustained tonic discharges (the

Fujisawa, Shigeyoshi

83

JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 31, NO. 19, OCTOBER 1, 2013 3181 Noise Figure in Near-Infrared Amorphous and  

E-Print Network [OSTI]

JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 31, NO. 19, OCTOBER 1, 2013 3181 Noise Figure in Near-Infrared, Senior Member, IEEE Abstract--The noise figures (NF) of near-infrared (near-IR) amorphous silicon (a Amorphous and Mid-Infrared Crystalline Silicon Optical Parametric Amplifiers Jichi Ma and Sasan Fathpour

Fathpour, Sasan

84

What Global Warming Looks Like The July 2010 global map of surface temperature anomalies (Figure 1), relative to the average  

E-Print Network [OSTI]

What Global Warming Looks Like The July 2010 global map of surface temperature anomalies (Figure 1 anomalies an example of what we can expect global warming to look like? Maps of temperature anomalies, such as Figure 1, are useful for helping people understand the role of global warming in extreme events

85

Figure 2: The mercury jet target geometry. The proton beam and mercury jet cross at z=-37.5 cm.  

E-Print Network [OSTI]

Figure 2: The mercury jet target geometry. The proton beam and mercury jet cross at z=-37.5 cm. Figure 3: The layout of multiple proton beam entry directions relative to mercury jet at z=-75 cm. A PION of a free liquid mercury jet with an intense proton beam. We study the variation of meson production

McDonald, Kirk

86

Facts and Figures January 2007 INCOME AND EXPENDITURE (Excluding Press, CA & Trusts) 2005-06  

E-Print Network [OSTI]

Facts and Figures January 2007 INCOME AND EXPENDITURE (Excluding Press, CA & Trusts) 2005-06 2004,928 Breakdown of Research Grant Income 2005-06 £'000 % £'000 Total staff 8602 8570 8,623 Research Councils 89,095 Total 203,886 188,711 Total respondents 2,890 100.0% 3,227 100.0 Breakdown of HEFCE/TDA Income 2005-06

Travis, Adrian

87

Giraffidae from the middle Miocene hominoid locality of andir (Turkey). 1 figure, 2 plates  

E-Print Network [OSTI]

1 Giraffidae from the middle Miocene hominoid locality of √?andir (Turkey). 1 figure, 2 plates Denis@ivry.cnrs.fr ** MTA Genel M√ľd√ľrl√ľg√ľ, Jeoloji Et√ľdleri Dairesi, 06520 ANKARA, TURKEY Abstract.- The site of √?andir has this area and the Siwaliks raises some interesting phylogenetic problems. Key-words.- Middle Miocene, Turkey

Paris-Sud XI, Université de

88

Figure 2. Stratigraphic Summary of Ages, Names and Rock Types in the ANWR  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs U.S.WyomingExpansion 5 Figure 2. Natural gas supply

89

Radiation source  

DOE Patents [OSTI]

A device and method for relativistic electron beam heating of a high-density plasma in a small localized region. A relativistic electron beam generator or accelerator produces a high-voltage electron beam which propagates along a vacuum drift tube and is modulated to initiate electron bunching within the beam. The beam is then directed through a low-density gas chamber which provides isolation between the vacuum modulator and the relativistic electron beam target. The relativistic beam is then applied to a high-density target plasma which typically comprises DT, DD, or similar thermonuclear gas at a density of 10.sup.17 to 10.sup.20 electrons per cubic centimeter. The target gas is ionized prior to application of the relativistic electron beam by means of a laser or other preionization source to form a plasma. Utilizing a relativistic electron beam with an individual particle energy exceeding 3 MeV, classical scattering by relativistic electrons passing through isolation foils is negligible. As a result, relativistic streaming instabilities are initiated within the high-density target plasma causing the relativistic electron beam to efficiently deposit its energy into a small localized region of the high-density plasma target.

Thode, Lester E. (Los Alamos, NM)

1981-01-01T23:59:59.000Z

90

Figure 2. Natural gas supply and disposition in the United States, 2013  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs U.S.WyomingExpansion 5 Figure 2. Natural gas supply and

91

Figure 6. PCs and Terminals per Million Square Feet, 1992 and 1995  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31 705PC's and5 PC'sFigure

92

Figure ES1. Schema for Estimating Energy and Energy-Related Statistics,  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31 705PC'sFigure ES1.

93

Figure ES2. Annual Indices of Real Disposable Income, Vehicle-Miles  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31 705PC'sFigure

94

Figure ES3. Sales-Weighted Horsepower and On-Road Fuel Mileage for New  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31 705PC'sFigureLight-Duty

95

Figure ES5. Actual Annual Energy Growth - All Effects Are Included  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31ES5 Figure ES5. Actual

96

Figure ES7. Adjusted Annual Energy Growth - No Fuel Economy Effects  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 6221,2372003ofDec. 31ES5 Figure ES5.ES7

97

Figure 4 | OSTI, US Dept of Energy, Office of Scientific and Technical  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityField Office Programs forDecember 5 Figure 2.

98

Figure 5 | OSTI, US Dept of Energy, Office of Scientific and Technical  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityField Office Programs forDecember 5 Figure

99

Figure 6 Bottom | OSTI, US Dept of Energy, Office of Scientific and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityField Office Programs forDecember 5 FigureTechnical

100

Sources of relict sand on the Northeast Texas continental shelf  

E-Print Network [OSTI]

) constructed a map showing their interpretation Gulf of Mexico for the sources and mixing of sediments in the Western (Fig. 5). The boundaries of this map were based on maps of the distribution of a few characteristic heavy mineral Percentages... SAMPLES ANALYZZD. . 63 viii LIST OF FIGURES EZGUBK 1? Map of northern Gulf of Mexico showing the heavy mineral provinces as defined by Goldstein (1942). Boxed in area shows the area of the northeast Texas shelf contained in this study, 2? Late...

Hawkins, Jeffrey Wayne

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

About the Work of Art In the 1940s, Christian Petersen sculpted a plaster figure of George Washington Carver. He  

E-Print Network [OSTI]

About the Work of Art In the 1940s, Christian Petersen sculpted a plaster figure of George this sculpture in bronze as he originally intended, so he painted the work of art to resemble bronze. The plaster

Mayfield, John

102

Flowsheets and source terms for radioactive waste projections  

SciTech Connect (OSTI)

Flowsheets and source terms used to generate radioactive waste projections in the Integrated Data Base (IDB) Program are given. Volumes of each waste type generated per unit product throughput have been determined for the following facilities: uranium mining, UF/sub 6/ conversion, uranium enrichment, fuel fabrication, boiling-water reactors (BWRs), pressurized-water reactors (PWRs), and fuel reprocessing. Source terms for DOE/defense wastes have been developed. Expected wastes from typical decommissioning operations for each facility type have been determined. All wastes are also characterized by isotopic composition at time of generation and by general chemical composition. 70 references, 21 figures, 53 tables.

Forsberg, C.W. (comp.)

1985-03-01T23:59:59.000Z

103

Thermoelectric figure of merit of silicide two-dimensional quantum wells  

SciTech Connect (OSTI)

The calculation was made to estimate thermoelectric figure of merit, ZT, of quantum well structured films made of Transition Metal (TM) silicide, alloys of silicon and germanium, etc. 1-dimensional quantum confinement of charge carrier with quantum well structure were assumed in the calculation model. Transport properties parallel to the layer were estimated as a function of well width. Full account was made of Fermi statistics, and thermal conduction in the barrier layer was taken into account. Results of the calculation indicate that moderate increase in ZT is possible in modulated doping superlattice structure of TM silicides. But ZT decreases with decreasing well width in combinations of silicon and TM silicides. This is due to the larger thermal conductivity of silicon used as a barrier material.

Yamamoto, Z.; Ohta, T. [Electrotechnical Lab., Tsukuba, Ibaraki (Japan)

1996-12-31T23:59:59.000Z

104

High figure-of-merit ultrathin metal transparent electrodes incorporating a conductive grid  

SciTech Connect (OSTI)

It is known that ultrathin (<10 nm) metal films (UTMFs) can achieve high level of optical transparency at the expense of the electrical sheet resistance. In this letter, we propose a design, the incorporation of an ad hoc conductive grid, which can significantly reduce the sheet resistance of UTMF based transparent electrodes, leaving practically unchanged their transparency. The calculated highest figure-of-merit corresponds to a filling factor and a grid spacing-to-linewidth ratio of 0.025 and 39, respectively. To demonstrate the capability of the proposed method the sheet resistance of a continuous 2 nm Ni film (>950 OMEGA/square) is reduced to approx6.5 OMEGA/square when a 100 nm thick Cu grid is deposited on it. The transparency is instead maintained at values exceeding 75%. These results, which can be further improved by making thicker grids, already demonstrate the potential in applications, such as photovoltaic cells, optical detectors and displays.

Ghosh, D. S.; Chen, T. L. [ICFO-Institut de Ciencies Fotoniques, Mediterranean Technology Park, Castelldefels, Barcelona, 08860 Catalunya (Spain); Pruneri, V. [ICFO-Institut de Ciencies Fotoniques, Mediterranean Technology Park, Castelldefels, Barcelona, 08860 Catalunya (Spain); ICREA-Institucio Catalana de Recerca i Estudis Avancats, 08010 Barcelona (Spain)

2010-01-25T23:59:59.000Z

105

Method and system for optical figuring by imagewise heating of a solvent  

DOE Patents [OSTI]

A method and system of imagewise etching the surface of a substrate, such as thin glass, in a parallel process. The substrate surface is placed in contact with an etchant solution which increases in etch rate with temperature. A local thermal gradient is then generated in each of a plurality of selected local regions of a boundary layer of the etchant solution to imagewise etch the substrate surface in a parallel process. In one embodiment, the local thermal gradient is a local heating gradient produced at selected addresses chosen from an indexed array of addresses. The activation of each of the selected addresses is independently controlled by a computer processor so as to imagewise etch the substrate surface at region-specific etch rates. Moreover, etching progress is preferably concurrently monitored in real time over the entire surface area by an interferometer so as to deterministically control the computer processor to image-wise figure the substrate surface where needed.

Rushford, Michael C.

2005-08-30T23:59:59.000Z

106

PHENIX (Pioneering High Energy Nuclear Interaction eXperiment): Data Tables and Figures from Published Papers  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The PHENIX Experiment is the largest of the four experiments currently taking data at the Relativistic Heavy Ion Collider. PHENIX, the Pioneering High Energy Nuclear Interaction eXperiment, is an exploratory experiment for the investigation of high energy collisions of heavy ions and protons. PHENIX is designed specifically to measure direct probes of the collisions such as electrons, muons, and photons. The primary goal of PHENIX is to discover and study a new state of matter called the Quark-Gluon Plasma. More than 60 published papers and preprints are listed here with links to the full text and separate links to the supporting PHENIX data in plain text tables and to EPS and GIF figures from the papers.

107

Gamma and neutron detection modeling in the nuclear detection figure of merit (NDFOM) portal  

SciTech Connect (OSTI)

The Nuclear Detection Figure Of Merit (NDFOM) portal is a database of objects and algorithms for evaluating the performance of radiation detectors to detect nuclear material. This paper describes the algorithms used to model the physics and mathematics of radiation detection. As a first-principles end-to-end analysis system, it starts with the representation of the gamma and neutron spectral fluxes, which are computed with the particle and radiation transport code MCNPX. The gamma spectra emitted by uranium, plutonium, and several other materials of interest are described. The impact of shielding and other intervening material is computed by the method of build-up factors. The interaction of radiation with the detector material is computed by a detector response function approach. The construction of detector response function matrices based on MCNPX simulation runs is described in detail. Neutron fluxes are represented in a three group formulation to treat differences in detector sensitivities to thermal, epithermal, and fast neutrons.

Stroud, Phillip D [Los Alamos National Laboratory; Saeger, Kevin J [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

108

Thermoelectric figure of merit of Ag{sub 2}Se with Ag and Se excess  

SciTech Connect (OSTI)

In the temperature range of 100-300 K, the electric ({sigma}) and thermoelectric ({alpha}{sub 0}) properties of Ag{sub 2}Se with an excess of Ag as high as {approx}0.1 at. % and Se as high as {approx}1.0 at. %, respectively, are investigated. From the data on {sigma}, {alpha}{sub 0}, and {chi}{sub tot} (thermal conductivities), the thermoelectric power {alpha}{sub 0}{sup 2}{sigma} and the figure of merit Z are calculated. It is found that {alpha}{sub 0}{sup 2}{sigma} and Z attain the peak values at room temperature and the electron concentration n {approx} 6.5 x 10{sup 18} cm{sup -3}.

Aliev, F. F., E-mail: farzali@physics.ab.az; Jafarov, M. B.; Eminova, V. I. [Azerbaijan National Academy of Sciences, Institute of Physics (Azerbaijan)

2009-08-15T23:59:59.000Z

109

Natural and Anthropogenic Ethanol Sources in North America and Potential Atmospheric Impacts of Ethanol  

E-Print Network [OSTI]

of Ethanol Fuel Use Dylan B. Millet*,1 , Eric Apel2 , Daven K. Henze3 , Jason Hill1 , Julian D. Marshall1S1 Natural and Anthropogenic Ethanol Sources in North America and Potential Atmospheric Impacts INFORMATION Supporting Information contains a total of 12 pages, 1 table, and 7 figures. 1. AIRBORNE ETHANOL

Mlllet, Dylan B.

110

IMAGE REGISTRATION USING POINT SOURCE CORRELATION Frank Masci 5/25/01  

E-Print Network [OSTI]

are registered to each other. In other words, 1 with 2, 2 with 3, 3 with 1 etc, resulting in a list of "pairwise DELTAFPOINT module). A robust minimization algorithm that utilizes all the matched sources will be used. Let us assume image number 3 in the above figure as the reference. 7. Having defined the reference

Masci, Frank

111

To appear in the ACM SIGGRAPH conference proceedings Accurate Light Source Acquisition and Rendering  

E-Print Network [OSTI]

and Rendering Michael Goesele , Xavier Granier , Wolfgang Heidrich , Hans-Peter Seidel 1) MPI Informatik 2) The University of British Columbia Figure 1: Stages of light source measurement and rendering (from left to right and efficient rendering algorithms to deal with them. In this paper, we describe a processing pipeline

Paris-Sud XI, Universitť de

112

To appear in the ACM SIGGRAPH conference proceedings Accurate Light Source Acquisition and Rendering  

E-Print Network [OSTI]

and Rendering Michael Goesele1) , Xavier Granier2) , Wolfgang Heidrich2) , Hans-Peter Seidel1) 1) MPI Informatik 2) The University of British Columbia Figure 1: Stages of light source measurement and rendering and efficient rendering algorithms to deal with them. In this paper, we describe a processing pipeline

Paris-Sud XI, Universitť de

113

Protected Water Sources (Iowa)  

Broader source: Energy.gov [DOE]

This chapter designates protected water sources, which are subject to additional special conditions regarding water use. Permit applications for water withdrawals from these sources may still be...

114

Source- and Age-Resolved Mechanistic Air Quality Models: Model Development and Application in Southeast Texas  

E-Print Network [OSTI]

naphthalene (a), acenaphthene (b), acenaphthylene (c), fluorene (d), and phenanthrene (e) and relevant observation from 2007 to 2010 at DRPK. .............................. 122 Figure 5-5. Model predicted APAH1 and APAH2 concentrations as well as the APAHT... of naphthalene, methylnaphthalene, acenaphthylene, and acenaphthene. They estimated that SOA production from oxidation of PAHs emitted from mobile sources in Houston could account for more than 10% of the SOA formed from emissions from mobile sources...

Zhang, Hongliang

2012-07-16T23:59:59.000Z

115

Supplemental figures and legends, Supplemental table legends, and Methods Lindquist, et al. manuscript  

E-Print Network [OSTI]

used in our meta-analysis. Other Supplemental Materials The open-source high-throughput image analysisSys 5500 contact arrayer and SMP7 stealth microarray pins (Genomic Solutions). Preprints were performed

Sabatini, David M.

116

Use of superposition and the extended pulse model to evaluate the contaminant transport parameters of variably source-loaded plumes  

E-Print Network [OSTI]

-vt O O W 2000 1000 cm 0 500 1000 cm OO x vt ~ cbservaticn ttclnts Figure 11. Plan view of the concentration plume ' 1 d' and inc u ing the source e decreased sour th it tio di gram a 1 ana yses are demarcated. or 39 1 5. 0 14. 0 3-5 13... and dedication to science have been a great source of inspiration to me. DEDICATION vii TABLE OF CONTENTS ABSTRACT ACKNOWLEDGEMENTS DEDICATION TABLE OF CONTENTS LIST OF FIGURES 1. INTRODUCTION 2. MATHEMATICAL CONSIDERATIONS 2. 1 The Advection...

Hankins, Donald Wayne

1988-01-01T23:59:59.000Z

117

Enhancement in figure-of-merit with superlattices structures for thin-film thermoelectric devices  

SciTech Connect (OSTI)

Thin-film superlattice (SL) structures in thermoelectric materials are shown to be a promising approach to obtaining an enhanced figure-of-merit, ZT, compared to conventional, state-of-the-art bulk alloyed materials. In this paper the authors describe experimental results on Bi{sub 2}Te{sub 3}/Sb{sub 2}Te{sub 3} and Si/Ge SL structures, relevant to thermoelectric cooling and power conversion, respectively. The short-period Bi{sub 2}Te{sub 3} and Si/Ge SL structures appear to indicate reduced thermal conductivities compared to alloys of these materials. From the observed behavior of thermal conductivity values in the Bi{sub 2}Te{sub 3}/Sb{sub 2}Te{sub 3} SL structures, a distinction is made where certain types of periodic structures may correspond to an ordered alloy rather than an SL, and therefore, do not offer a significant reduction in thermal conductivity values. The study also indicates that SL structures, with little or weak quantum-confinement, also offer an improvement in thermoelectric power factor over conventional alloys. They present power factor and electrical transport data in the plane of the SL interfaces to provide preliminary support for the arguments on reduced alloy scattering and impurity scattering in Bi{sub 2}Te{sub 3}/Sb{sub 2}Te{sub 3} and Si/Ge SL structures. These results, though tentative due to the possible role of the substrate and the developmental nature of the 3-{omega} method used to determine thermal conductivity values, suggest that the short-period SL structures potentially offer factorial improvements in the three-dimensional figure-of-merit (ZT3D) compared to current state-of-the-art bulk alloys. An approach to a thin-film thermoelectric device called a Bipolarity-Assembled, Series-Inter-Connected Thin-Film Thermoelectric Device (BASIC-TFTD) is introduced to take advantage of these thin-film SL structures.

Venkatasubramanian, R.; Colpitts, T.

1997-07-01T23:59:59.000Z

118

GEOMETRIC SOURCE SEPARATION: MERGING CONVOLUTIVE SOURCE  

E-Print Network [OSTI]

adaptive beamforming algorithms by a cross-power criteria, we gain new geometric source separation with convo- lutive blind source separation. We concentrate on cross-power spectral min- imization which is su to ambiguities in the choice of separating lters. There are in theory multiple lters that invert the room

Parra, Lucas C.

119

X-ray source for mammography  

DOE Patents [OSTI]

An x-ray source is described utilizing anode material which shifts the output spectrum to higher energy and thereby obtains higher penetrating ability for screening mammography application, than the currently utilized anode material. The currently used anode material (molybdenum) produces an energy x-ray spectrum of 17.5/19.6 keV, which using the anode material of this invention (e.g. silver, rhodium, and tungsten) the x-ray spectrum would be in the 20-35 keV region. Thus, the anode material of this invention provides for imaging of breasts with higher than average x-ray opacity without increase of the radiation dose, and thus reduces the risk of induced breast cancer due to the radiation dose administered for mammograms. 6 figures.

Logan, C.M.

1994-12-20T23:59:59.000Z

120

Science and Technology of Future Light Sources  

SciTech Connect (OSTI)

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of electromagnetic origin, it is intuitively clear that electromagnetic radiation is the critical tool in the study of material properties. On the level of atoms, electrons, and spins, x-rays have proved especially valuable. Future advanced x-ray sources and instrumentation will extend the power of x-ray methods to reach greater spatial resolution, increased sensitivity, and unexplored temporal domains. The purpose of this document is threefold: (1) summarize scientific opportunities that are beyond the reach of today's x-ray sources and instrumentation; (2) summarize the requirements for advanced x-ray sources and instrumentation needed to realize these scientific opportunities, as well as potential methods of achieving them; and (3) outline the R&D required to establish the technical feasibility of these advanced x-ray sources and instrumentation.

Dierker,S.; Bergmann, U.; Corlett, J.; Dierker, S.; Falcone, R.; Galayda, J.; Gibson, M.; Hastings, J.; Hettel, B.; Hill, J.; Hussain, Z.; Kao, C.-C.; Kirx, J.; Long, G.; McCurdy, B.; Raubenheimer, T.; Sannibale, F.; Seeman, J.; Shen, Z.-X.; Shenoy, g.; Schoenlein, B.; Shen, Q.; Stephenson, B.; Stohr, J.; Zholents, A.

2008-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Science and Technology of Future Light Sources  

SciTech Connect (OSTI)

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of electromagnetic origin, it is intuitively clear that electromagnetic radiation is the critical tool in the study of material properties. On the level of atoms, electrons, and spins, x-rays have proved especially valuable. Future advanced x-ray sources and instrumentation will extend the power of x-ray methods to reach greater spatial resolution, increased sensitivity, and unexplored temporal domains. The purpose of this document is threefold: (1) summarize scientific opportunities that are beyond the reach of today's x-ray sources and instrumentation; (2) summarize the requirements for advanced x-ray sources and instrumentation needed to realize these scientific opportunities, as well as potential methods of achieving them; and (3) outline the R&D required to establish the technical feasibility of these advanced x-ray sources and instrumentation.

Bergmann, Uwe; Corlett, John; Dierker, Steve; Falcone, Roger; Galayda, John; Gibson, Murray; Hastings, Jerry; Hettel, Bob; Hill, John; Hussain, Zahid; Kao, Chi-Chang; Kirz, Janos; Long, Danielle; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z.-X.; Schenoy, Gopal; Schoenlein, Bob; Shen, Qun; Stephenson, Brian; St& #246; hr, Joachim; Zholents, Alexander

2009-01-28T23:59:59.000Z

122

Electrical properties and figures of merit for new chalcogenide-based thermoelectric materials  

SciTech Connect (OSTI)

New Bi-based chalcogenide compounds have been prepared using the polychalcogenide flux technique for crystal growth. These materials exhibit characteristics of good thermoelectric materials. Single crystals of the compound CsBi{sub 4}Te{sub 6} have shown conductivity as high as 2440 S/cm with a p-type thermoelectric power of {approx}+110 {micro}V/K at room temperature. A second compound, {beta}-K{sub 2}Bi{sub 8}Se{sub 13} shows lower conductivity {approx}240 S/cm, but a larger n-type thermopower {approx}{minus}200 {micro}V/K. Thermal transport measurements have been performed on hot-pressed pellets of these materials and the results show comparable or lower thermal conductivities than Bi{sub 2}Te{sub 3}. This improvement may reflect the reduced lattice symmetry of the new chalcogenide thermoelectrics. The thermoelectric figure of merit for CsBi{sub 4}Te{sub 6} reaches ZT {approx} 0.32 at 260 K and for {beta}-K{sub 2}Bi{sub 8}Se{sub 13} ZT {approx} 0.32 at room temperature, indicating that these compounds are viable candidates for thermoelectric refrigeration applications.

Schindler, J.L.; Hogan, T.P.; Brazis, P.W.; Kannewurf, C.R.; Chung, D.Y.; Kanatzidis, M.G.

1997-07-01T23:59:59.000Z

123

Multiple-Filled Skutterudites: High Thermoelectric Figure of Merit through Separately Optimizing Electrical and Thermal Transports  

SciTech Connect (OSTI)

Skutterudites CoSb{sub 3} with multiple cofillers Ba, La, and Yb were synthesized and very high thermoelectric figure of merit ZT = 1.7 at 850 K was realized. X-ray diffraction of the densified multiple-filled bulk samples reveals all samples are phase pure. High-resolution scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS) analysis confirm that multiple guest fillers occupy the nanoscale-cages in the skutterudites. The fillers are further shown to be uniformly distributed and the Co-Sb skutterudite framework is virtually unperturbed from atomic scale to a few micrometers. Our results firmly show that high power factors can be realized by adjusting the total filling fraction of fillers with different charge states to reach the optimum carrier density, at the same time, lattice thermal conductivity can also be significantly reduced, to values near the glass limit of these materials, through combining filler species of different rattling frequencies to achieve broad-frequency phonon scattering. Therefore, partially filled skutterudites with multiple fillers of different chemical nature render unique structural characteristics for optimizing electrical and thermal transports in a relatively independent way, leading to continually enhanced ZT values from single- to double-, and finally to multiple-filled skutterudites. The idea of combining multiple fillers with different charge states and rattling frequencies for performance optimization is also expected to be valid for other caged TE compounds.

Zhang, Weiqing [Chinese Academy of Sciences; Yang, Jiong [Chinese Academy of Sciences; Yang, Jihui [General Motors Corporation; Wang, Hsin [ORNL; Salvador, James R. [GM R& D and Planning, Warren, Michigan; Shi, Xun [General Motors Corporation-R& D; Chi, Miaofang [ORNL; Cho, Jung Y [GM R& D and Planning, Warren, Michigan; Bai, Shengqiang [Chinese Academy of Sciences; Chen, Lidong [Chinese Academy of Sciences

2011-01-01T23:59:59.000Z

124

Enhanced thermoelectric figure of merit in edge-disordered zigzag graphene nanoribbons H. Sevinli* and G. Cuniberti  

E-Print Network [OSTI]

qualify zigzag graphene nanoribbons as a very promising material for thermoelectric applications. DOI: 10Enhanced thermoelectric figure of merit in edge-disordered zigzag graphene nanoribbons H. Sevinçli* and G. Cuniberti Institute for Materials Science and Max Bergmann Center of Biomaterials, Dresden

Cuniberti, Gianaurelio

125

Figure 7.1: Opticalmicrograpli for SPC'imcn aust nitiscd at 1060 for 2 liours at 700C.  

E-Print Network [OSTI]

Figure 7.1: Opticalmicrograpli for SPC'imcn aust nitiscd at 1060¬į for 2 liours at 700¬įC. 166 15mins) and in thC' SPC'CilllC'1IisothNmally hl'at Irl'atN) for 117:1 hours at 700¬įC h) which r('pr('s('nt c

Cambridge, University of

126

Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored  

E-Print Network [OSTI]

Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored auras. Red is high usage while green is low usage. HomeWindow: An Augmented Reality Domestic that reflects its current and historical energy use. Categories and Subject Descriptors H.5.2 [Information

Greenberg, Saul

127

Figure 1. Block diagram of the turbo decoder. A Memory-Reduced Log-MAP Kernel for Turbo Decoder  

E-Print Network [OSTI]

Figure 1. Block diagram of the turbo decoder. A Memory-Reduced Log-MAP Kernel for Turbo Decoder--Generally, the Log-MAP kernel of the turbo decoding consume large memories in hardware implement- tation of the turbo decoder is implemented to verify the proposed memory-reduced Log- MAP kernel in 3.04√?3.04mm2 core

Hung, Shih-Hao

128

Figure 1. Schematic drawing showing the components of a Li-ion battery cell and the information that can be  

E-Print Network [OSTI]

Figure 1. Schematic drawing showing the components of a Li-ion battery cell and the information Proposals In Situ Electron Microscopy and Spectroscopy Studies of Interfaces in Advanced Li-ion Batteries) such as Li-ion batteries are complex multi- component systems that incorporate widely dissimilar phases

129

Figure 2. Urban lawns have ~ 2x the microbial biomass of native and/or cultivated areas. Viable microbial biomass  

E-Print Network [OSTI]

Figure 2. Urban lawns have ~ 2x the microbial biomass of native and/or cultivated areas. Viable and fertilized Corn: flood irrigated and fertilized Wheat-Fallow: a dryland winter wheat cropping system C and N mineralization rates (data not shown) than other ecosystems, suggesting that energy

Hall, Sharon J.

130

Fluid Systems For the system in Figure 1.1, the pipe is circular and has length L and diameter d. The fluid  

E-Print Network [OSTI]

Fluid Systems QUESTION 1 For the system in Figure 1.1, the pipe is circular and has length L the system dynamics. A1 pa pa A2 pa k2, 2 k3, 3 k1, 1 wi(t) pipe Figure 1.1 #12;Fluid Systems 2 QUESTION 2 For the system in Figure 2.1, the pipe has length L and area Ap. Half way along the pipe is a flexible container

Landers, Robert G.

131

Figure 2 Known and speculative Eocene-Oligocene paleovalleys of northern California and western Nevada. Lower portions of channels from Lindgren (1911) and Lawler (1995). Some central Nevada calderas shown.  

E-Print Network [OSTI]

Dayton Kings Beach Reno Sparks Sun Valley Yerington Dutch Hill Mine Bean Hill Spanish Peak TaylorsLake FIGURE 8 FIGURE 7 FIGURE 6 Taylorsville N 0 10 20 0 10 20 miles 30 kilometers CALIFORNIA NEVADA LassenCounty SierraCounty Plumas County Figure 4 Map of known and speculative Eocene-Oligocene paleovalleys

Tingley, Joseph V.

132

DC source assemblies  

DOE Patents [OSTI]

Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

Campbell, Jeremy B; Newson, Steve

2013-02-26T23:59:59.000Z

133

11.5 MATLAB Laboratory Experiment on Circuits Consider the electrical circuit presented in Figure 11.18. Assume that all resistors in the  

E-Print Network [OSTI]

11.5 MATLAB Laboratory Experiment on Circuits Consider the electrical circuit presented in Figure analysis, form the matrices j and k and the vector of initial conditions. Use MATLAB to find the currents via MATLAB, using the electrical circuit given in Figure 11.19 and the corresponding formulas

Gajic, Zoran

134

1-6 Figure 1.3. View of the field area, looking south-southwest. Left side of the picture shows the  

E-Print Network [OSTI]

the large reservoir of highly valuable marble deposits. [Note: page reformatted from original; picture above Wallingford marble quarry. #12;2-10 Figure 2.4. Rock sample of Baker Brook Greenschist showing pervasive, Baker Brook Falls Th.16) #12;#12;#12;#12;#12;#12;#12;#12;2-18 Figure 2.7. Imperial Danby Quarry in Danby

Kidd, William S. F.

135

Figure 1. The dataset for the running example is excerpted at left, arranged in the typical manner for MVPA. The boxes at right introduce the dataset  

E-Print Network [OSTI]

Figure 1. The dataset for the running example is excerpted at left, arranged in the typical manner for MVPA. The boxes at right introduce the dataset representation used in later figures. In these boxes the "dataset-wise" scheme, the examples are relabeled prior to conducting the cross- validation, while

136

Colored figures Franke & Gaser (2012): Longitudinal changes in individual BrainAGE in healthy aging, mild cognitive impairment, and Alzheimer's disease  

E-Print Network [OSTI]

Colored figures Franke & Gaser (2012): Longitudinal changes in individual BrainAGE in healthy aging, mild cognitive impairment, and Alzheimer's disease Figure 1: Depiction of the BrainAGE concept. A: The model of healthy brain aging is trained with the chronological age and preprocessed structural MRI data

Gaser, Christian

137

Supporting information Figure S1: Pump-rePump-Probe kinetics of peridinin in methanol. Peridinin was excited at  

E-Print Network [OSTI]

Supporting information Figure S1: Pump-rePump-Probe kinetics of peridinin in methanol. Peridinin was excited at 400-nm, and then repumped, at a delay of 1 ps, by pulses of 620-nm. (A) Pump-Probe (blue), Pump-rePump. The inset zooms on the repump. (C): Pump-Probe (blue) and Pump-rePump-Probe (red) and (D) OD (black) spectra

van Stokkum, Ivo

138

Tsien_Supplementary Figure 1 ISO(min) 0 0 1.5 1.5 5 5  

E-Print Network [OSTI]

Tsien_Supplementary Figure 1 ISO(min) 0 0 1.5 1.5 5 5 0 1000 2000 3000 4000 5000 Insulin 1000 1200 0.95 1.00 1.05 1.10 1.15 1.20 1.25 Normalizedemissionratio Time (sec) ISO control Insulin CREB phosphorylation. #12;-120 0 120 240 360 480 1.00 1.02 1.04 1.06 1.08 +Ht31p ISO

Tsien, Roger Y.

139

Dynamic radioactive particle source  

DOE Patents [OSTI]

A method and apparatus for providing a timed, synchronized dynamic alpha or beta particle source for testing the response of continuous air monitors (CAMs) for airborne alpha or beta emitters is provided. The method includes providing a radioactive source; placing the radioactive source inside the detection volume of a CAM; and introducing an alpha or beta-emitting isotope while the CAM is in a normal functioning mode.

Moore, Murray E.; Gauss, Adam Benjamin; Justus, Alan Lawrence

2012-06-26T23:59:59.000Z

140

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander Ranking Member SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION...

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

SOURCE SELECTION INFORMATION -  

Energy Savers [EERE]

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR)...

142

Radiation Source Replacement Workshop  

SciTech Connect (OSTI)

This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

2010-12-01T23:59:59.000Z

143

Lithium ion sources  

E-Print Network [OSTI]

HIFAN 1866 Lithium ion sources by Prabir K. Roy, Wayne G.No. DE-AC02-05CH11231. Lithium ion sources Prabir K. RoyUSA Abstract A 10.9 cm diameter lithium alumino-silicate ion

Roy, Prabir K.

2014-01-01T23:59:59.000Z

144

Neutron sources and applications  

SciTech Connect (OSTI)

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1994-01-01T23:59:59.000Z

145

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

146

Piezotube borehole seismic source  

DOE Patents [OSTI]

A piezoelectric borehole source capable of permanent or semipermanent insertion into a well for uninterrupted well operations is described. The source itself comprises a series of piezoelectric rings mounted to an insulative mandrel internally sized to fit over a section of well tubing, the rings encased in a protective housing and electrically connected to a power source. Providing an AC voltage to the rings will cause expansion and contraction sufficient to create a sonic pulse. The piezoelectric borehole source fits into a standard well, and allows for uninterrupted pass-through of production tubing, and other tubing and electrical cables. Testing using the source may be done at any time, even concurrent with well operations, during standard production.

Daley, Tom M; Solbau, Ray D; Majer, Ernest L

2014-05-06T23:59:59.000Z

147

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center.

Greenly, John B. (Lansing, NY)

1997-01-01T23:59:59.000Z

148

Science and Technology of Future Light Sources: A White Paper  

SciTech Connect (OSTI)

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects (Figure 1.1). The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of electromagnetic origin, it is intuitively clear that electromagnetic radiation is the critical tool in the study of material properties. On the level of atoms, electrons, and spins, x-rays have proved especially valuable. Future advanced x-ray sources and instrumentation will extend the power of x-ray methods to reach greater spatial resolution, increased sensitivity, and unexplored temporal domains. The purpose of this document is threefold: (1) summarize scientific opportunities that are beyond the reach of today's x-ray sources and instrumentation; (2) summarize the requirements for advanced x-ray sources and instrumentation needed to realize these scientific opportunities, as well as potential methods of achieving them; and (3) outline the R&D required to establish the technical feasibility of these advanced x-ray sources and instrumentation.

Bergmann, Uwe; Corlett, John; Dierker, Steve; Falcone, Roger; Galayda, John; Gibson, Murray; Hastings, Jerry; Hettel, Bob; Hill, John; Hussain, Zahid; Kao, Chi-Chang; Kirz, a= Janos; Long, Gabrielle; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z.-X.; Shenoy, Gopal; Schoenlein, Bob; Shen, Qun; /Argonne /Brookhaven /LBL, Berkeley /SLAC, SSRL

2009-02-03T23:59:59.000Z

149

Evaluation of the Industrial Source Complex Screen2 for regulatory purposes  

E-Print Network [OSTI]

stack. . . . . , . . 78 Figure 11. Arrangement of sampler stations for proposed validation of CGD. . . . . . 79 LIST OF TABLES Page Table 1. Emission factors for picker and stripper gins 25 Table 2 Emission rates for gins based upon an emission... be used to determine whether a source of pollution (cotton gin) is in compliance with State Air Pollution Rules and Regulations: (1) Opacity - The inspector can determine the opacity of all emitting points. It is assumed that the gin is not exceeding...

Williams, Linda Mendez

1996-01-01T23:59:59.000Z

150

COMPARISON OF FAT SOURCES ON DIGESTION AND RUMINAL BIOHYDROGENATION IN CATTLE CONSUMING A FEEDLOT RATION  

E-Print Network [OSTI]

:F in steers if intake does not change (Brandt and Anderson, 1990). Depending on fat source, marbling on carcasses has either increased or been similar to control diets when fed to feedlot steers (Zinn, 1989b; Brandt and Anderson, 1990). Although fat... supplementation did not effect total tract starch digestion. The level of supplementation on total starch digestion is depicted in Figure 1, which demonstrates fat supplementation does not change digestibility of starch. When intake was restricted to 1.8% BW...

Baber, Jessica

2014-01-15T23:59:59.000Z

151

Sources and distribution of coarse silts on the South Texas continental shelf  

E-Print Network [OSTI]

from the igneous and metamorphic terranes of Texas, New Mexico, and Mexico. The Brazos-Colorado and Rio Grande river systems drain crystalline rock terranes in Central Texas, West Texas, New Mexico, and northern Aexico and have supplied sediments... orpus Christi Bay gt m~ 27 //' I (( /' Mexico I:, :'::: Rio Grande Province Texas Coast Province Western Gulf Province rr! crr t-rnrted 'c ) J 0 10 20 0 20 40 Kilometers FIGURE 3. Summary Map Showing The Source, Distribution, Mixing...

Crisp, Jeffery Arlan

1985-01-01T23:59:59.000Z

152

Tunable terahertz radiation source  

SciTech Connect (OSTI)

Terahertz radiation source and method of producing terahertz radiation, said source comprising a junction stack, said junction stack comprising a crystalline material comprising a plurality of self-synchronized intrinsic Josephson junctions; an electrically conductive material in contact with two opposing sides of said crystalline material; and a substrate layer disposed upon at least a portion of both the crystalline material and the electrically-conductive material, wherein the crystalline material has a c-axis which is parallel to the substrate layer, and wherein the source emits at least 1 mW of power.

Boulaevskii, Lev; Feldmann, David M; Jia, Quanxi; Koshelev, Alexei; Moody, Nathan A

2014-01-21T23:59:59.000Z

153

Microfabricated diffusion source  

DOE Patents [OSTI]

A microfabricated diffusion source to provide for a controlled diffusion rate of a vapor comprises a porous reservoir formed in a substrate that can be filled with a liquid, a headspace cavity for evaporation of the vapor therein, a diffusion channel to provide a controlled diffusion of the vapor, and an outlet to release the vapor into a gas stream. The microfabricated diffusion source can provide a calibration standard for a microanalytical system. The microanalytical system with an integral diffusion source can be fabricated with microelectromechanical systems technologies.

Oborny, Michael C. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

2008-07-15T23:59:59.000Z

154

A surface ionization source  

E-Print Network [OSTI]

The main part of the work described herein is the development and testing of a surface ionization source for use on a collinear fast beam laser spectroscopy apparatus. A description of the previously existing fast beam apparatus is given...

Buzatu, Daniel J.

1995-01-01T23:59:59.000Z

155

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

156

Galactic Superluminal Sources  

E-Print Network [OSTI]

A new class of X-ray sources was clearly established with the discovery of highly relativistic radio jets from the galactic sources GRS 1915+105 and GRO J1655-40. Both of these objects have given us a broader view of black holes and the formation of jets, yet they also show the complexity of the accretion environment near relativistic objects. The fast apparent motion of the jets, their luminosity and variability, their high energy spectrum, and approximate scaling to the behavior of active galactic nuclei, certainly warrant the description "microquasar". I present a review of the observational data on these sources, and discuss where we stand on a physical picture of GRS 1915+105 and GRO J1655-40 as taken from multi-wavelength studies. I also point out other galactic sources which share some of the properties of the microquasars, and what to look for as a high energy "signature" in future observations.

B. A. Harmon

1998-12-21T23:59:59.000Z

157

ION SOURCES FOR CYCLOTRONS  

E-Print Network [OSTI]

These utilize lasers, plasma focus, sparks, and ex≠ plodingextractor voltage A plasma focus device has been used byf n a s Fig. 22: The plasma focus high charge state source

Clark, D.J.

2010-01-01T23:59:59.000Z

158

Computerized Energy Information Sources  

E-Print Network [OSTI]

Many computerized files of energy- and energy conservation-related information are currently available through commercial and governmental sources such as Lockheed Information Systems, System Development Corporation, and DOE/RECON. Private...

Gordon, D.

1979-01-01T23:59:59.000Z

159

Field emission electron source  

DOE Patents [OSTI]

A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

Zettl, Alexander Karlwalter (Kensington, CA); Cohen, Marvin Lou (Berkeley, CA)

2000-01-01T23:59:59.000Z

160

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal.

Makowiecki, Daniel M. (Livermore, WA); McKernan, Mark A. (Livermore, CA); Grabner, R. Fred (Brentwood, CA); Ramsey, Philip B. (Livermore, CA)

1994-01-01T23:59:59.000Z

162

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal. 12 figs.

Makowiecki, D.M.; McKernan, M.A.; Grabner, R.F.; Ramsey, P.B.

1994-08-02T23:59:59.000Z

163

Supplemental Figures and Tables for Groundfish EFH Review Phase 1 Report "Federal and State Marine Protected Areas Type of Fishing Restriction"  

E-Print Network [OSTI]

"Federal and State Marine Protected Areas ­ Type of Fishing Restriction" Author and state MPAs depicted in map figures, categorized by level of fishing restriction Fishing Restriction BEFORE AFTER Commercial and Recreational Fishing Prohibited

Goldfinger, Chris

164

ESRP 285 Climate Chart Questions: Your Name _______________________________ You saw Figure 1 in class. It shows estimates of atmospheric CO2 in black, average earth  

E-Print Network [OSTI]

in class. It shows estimates of atmospheric CO2 in black, average earth temperature in red and sea level be much higher than normal every 100,000 yrs #12;5. Figure 1 shows the average earth temperature

Ford, Andrew

165

Cameras, PwrMeter,and MultiMeter rfi August 27, 1999 5 FIGURE 3: Power meter birdie with door closed.  

E-Print Network [OSTI]

Cameras, PwrMeter,and MultiMeter rfi August 27, 1999 5 FIGURE 3: Power meter birdie with door closed. Fri Aug 27 23:17:58 1999 phil #12; Cameras, PwrMeter,and MultiMeter rfi August 27, 1999 4 FIGURE 2. Power meter, multimeter birdies with door closed. Fri Aug 27 23:14:06 1999 phil #12; Cameras, PwrMeter

166

Test procedures and protocols: Their relevance to the figure of merit for thermal distribution systems. Volume 1: Informal report  

SciTech Connect (OSTI)

A conceptual framework is developed that categorizes measurement protocols for forced-air thermal distribution systems in small buildings. This framework is based on the distinction between two generic approaches. The {open_quote}system-comparison{close_quote} approach seeks to determine, via a pair of whole-house energy-use measurements, the difference in energy use between the house with the as-found duct system and the same house with no energy losses attributable to the thermal distribution system. The {open_quote}component loss-factor{close_quote} approach identifies and measures the individual causes of duct losses, and then builds up a value for the net overall duct efficiency, usually with the help of computer simulation. Examples of each approach are analyzed and related to a proposed Figure of Merit for thermal distribution systems. This Figure of Merit would serve as the basis for a Standard Method of Test analogous to those already in place for furnaces, boilers, air conditioners, and heat pumps.

Andrews, J.W.

1993-09-01T23:59:59.000Z

167

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source is disclosed having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center. 12 figs.

Greenly, J.B.

1997-08-12T23:59:59.000Z

168

Dual source heat pump  

DOE Patents [OSTI]

What is disclosed is a heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating the fluid in heat exchange relationship with a refrigerant fluid; at least two refrigerant heat exchangers, one for effecting heat exchange with the fluid and a second for effecting heat exchange between refrigerant and a heat exchange fluid and the ambient air; a compressor for efficiently compressing the refrigerant; at least one throttling valve for throttling liquid refrigerant; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circulating device and heat exchange fluid circuit for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and direction of flow of the refrigerant therethrough for selecting a particular mode of operation. The heat exchange fluid provides energy for defrosting the second heat exchanger when operating in the air source mode and also provides a alternate source of heat.

Ecker, Amir L. (Dallas, TX); Pietsch, Joseph A. (Dallas, TX)

1982-01-01T23:59:59.000Z

169

INEEL Source Water Assessment  

SciTech Connect (OSTI)

The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 mi2 and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEELís drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Surveyís Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agencyís Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a thick vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEELís Source Water Assessment. Of the INEELís 12 public water systems, three systems rated as low susceptibility (EBR-I, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead protection areas that will protect the INEELís public water systems yet not too conservative to inhibit the INEEL from carrying out its missions.

Sehlke, Gerald

2003-03-01T23:59:59.000Z

170

COMBUSTION SOURCES OF NITROGEN COMPOUNDS  

E-Print Network [OSTI]

Rasmussen, R.A. (1976). Combustion as a source of nitrousx control for stationary combustion sources. Prog. Energy,CA, March 3-4, 1977 COMBUSTION SOURCES OF NITROGEN COMPOUNDS

Brown, Nancy J.

2011-01-01T23:59:59.000Z

171

OLED area illumination source  

DOE Patents [OSTI]

The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

2008-03-25T23:59:59.000Z

172

Investigation of ISIS and Brookhaven National Laboratory ion source electrodes after extended operation  

SciTech Connect (OSTI)

Linac4 accelerator of Centre Europeen de Recherches Nucleaires is under construction and a RF-driven H{sup -} ion source is being developed. The beam current requirement for Linac4 is very challenging: 80 mA must be provided. Cesiated plasma discharge ion sources such as Penning or magnetron sources are also potential candidates. Accelerator ion sources must achieve typical reliability figures of 95% and above. Investigating and understanding the underlying mechanisms involved with source failure or ageing is critical when selecting the ion source technology. Plasma discharge driven surface ion sources rely on molybdenum cathodes. Deformation of the cathode surfaces is visible after extended operation periods. A metallurgical investigation of an ISIS ion source is presented. The origin of the deformation is twofold: Molybdenum sputtering by cesium ions digs few tenths of mm cavities while a growth of molybdenum is observed in the immediate vicinity. The molybdenum growth under hydrogen atmosphere is hard and loosely bound to the bulk. It is, therefore, likely to peel off and be transported within the plasma volume. The observation of the cathode, anode, and extraction electrodes of the magnetron source operated at BNL for two years are presented. A beam simulation of H{sup -}, electrons, and Cs{sup -} ions was performed with the IBSimu code package to qualitatively explain the observations. This paper describes the operation conditions of the ion sources and discusses the metallurgical analysis and beam simulation results.

Lettry, J.; Gerardin, A.; Pereira, H.; Sgobba, S. [CERN, 1211 Geneva 23 (Switzerland); Alessi, J. [BNL, P.O. Box 5000, Upton, New York 11973-5000 (United States); Faircloth, D. [RAL, Harwell Oxford, Didcot OX11 0QX (United Kingdom); Kalvas, T. [University of Jyvaskyla, P.O.Box 35, FI-40014 (Finland)

2012-02-15T23:59:59.000Z

173

Investigation of ISIS and Brookhaven National Laboratory ion source electrodes after extended operation  

SciTech Connect (OSTI)

Linac4 accelerator of Centre Europeen de Recherches Nucleaires is under construction and a RF-driven H{sup -} ion source is being developed. The beam current requirement for Linac4 is very challenging: 80 mA must be provided. Cesiated plasma discharge ion sources such as Penning or magnetron sources are also potential candidates. Accelerator ion sources must achieve typical reliability figures of 95% and above. Investigating and understanding the underlying mechanisms involved with source failure or ageing is critical when selecting the ion source technology. Plasma discharge driven surface ion sources rely on molybdenum cathodes. Deformation of the cathode surfaces is visible after extended operation periods. A metallurgical investigation of an ISIS ion source is presented. The origin of the deformation is twofold: Molybdenum sputtering by cesium ions digs few tenths of mm cavities while a growth of molybdenum is observed in the immediate vicinity. The molybdenum growth under hydrogen atmosphere is hard and loosely bound to the bulk. It is, therefore, likely to peel off and be transported within the plasma volume. The observation of the cathode, anode, and extraction electrodes of the magnetron source operated at BNL for two years are presented. A beam simulation of H{sup -}, electrons, and Cs{sup -} ions was performed with the IBSimu code package to qualitatively explain the observations. This paper describes the operation conditions of the ion sources and discusses the metallurgical analysis and beam simulation results.

Lettry J.; Alessi J.; Faircloth, D.; Gerardin, A.; Kalvas, T.; Pereira, H.; Sgobba, S.

2012-02-23T23:59:59.000Z

174

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P{sup +} from PH{sub 3}. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P{sup +}, As{sup +}, and B{sup +} without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices. 6 figs.

Leung, K.N.

1996-05-14T23:59:59.000Z

175

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P.sup.+ from PH.sub.3. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P.sup.+, AS.sup.+, and B.sup.+ without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices.

Leung, Ka-Ngo (Hercules, CA)

1996-01-01T23:59:59.000Z

176

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish Department of Energy (DOE) interim policy and to provide guidance for sealed radioactive source accountability. The directive does not cancel any directives. Extended by DOE N 5400.10 to 12-24-93 & Extended by DOE N 5400.12 to 12-24-94.

1991-12-24T23:59:59.000Z

177

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Notice extends DOE N 5400.9, Sealed Radioactive Source Accountability, of 12-24-91, until 12-24-95, unless sooner superseded or rescinded. The contents of DOE N 5400.9 will be updated and incorporated in the revised DOE O 5480.11, Radiation Protection for Occupational Workers.

1994-12-22T23:59:59.000Z

178

Evaluation of White Light Sources For an Absolute Fiber Optic Sensor Readout System  

SciTech Connect (OSTI)

This report summarizes work done in pursuit of an absolute readout system for Fabry-Perot optics sensors such as those built both by FISO and LLNL. The use of white light results in a short coherence length reducing the ambiguity of the Fabry-Perot gap measurement which is required to readout the sensor. The light source coherence length is the critical parameter in determining the ability to build a relative or an absolute system. Optical sources such as lasers and LEDs are rather narrow in optical spectral bandwidth and have long coherence length. Thus, when used in interferometric sensor measurements, one fringe looks much like another and it is difficult to make an absolute measurement. In contrast, white light sources are much broader in spectral bandwidth and have very short coherence lengths making interferometry possible only over the coherence length, which can be 1 or 2 microns. The small number of fringes in the interferogram make it easier to calculate the centroid and to unambiguously determine the sensor gap. However, unlike LEDs and Lasers, white light sources have very low optical power when coupled into optical fibers. Although, the overall light output of a white light source can be hundreds of milliwatts to watts, it is difficult to couple more than microwatts into a 50-micron core optical fiber. In addition, white light sources have a large amount of optical power in spectrum that is not necessarily useful in terms of sensor measurements. The reflectivity of a quarter wave of Titanium Oxide is depicted in Figure 2. This coating of Titanium Oxide is used in the fabrication of the sensor. This figure shows that any light emitted at wavelengths shorter than 600 nm is not too useful for the readout system. A white light LED spectrum is depicted in Figure 3 and shows much of the spectrum below 600 nm. In addition Silicon photodiodes are usually used in the readout system limiting the longest wavelength to about 1100 nm. Tungsten filament sources may have much of their optical power at wavelengths longer than 1100 nm, which is outside the wavelength range of interest. An incandescent spectrum from a tungsten filament is depicted in Figure 4. None of this is to say that other types of readout systems couldn't be built with IR detectors and broadband coatings for the sensors. However, without reengineering the sensors, the wavelength restrictions must be tolerated.

McConaghy, C F

2003-10-10T23:59:59.000Z

179

ILC Polarized Electron Source Design and R&D Program  

SciTech Connect (OSTI)

The R and D program for the ILC electron focuses on three areas. These are the source drive laser system, the electron gun and photo cathodes necessary to produce a highly polarized electron beam. Currently, the laser system and photo cathode development take place at SLAC's 'ILC Injector Test facility', which is an integrated lab (laser and gun) that allows the production of the electron beam and is equipped with a set of diagnostics, necessary to characterize the source performance. Development of the ILC electron gun takes place at Jefferson Lab, where advanced concepts and technologies for HV DC electron guns for polarized beams are being developed. The goal is to combine both efforts at one facility to demonstrate an electron beam with ILC specifications, which are electron beam charge and polarization as well as the cathode's lifetime. The source parameters are summarized in Table 1. The current schematic design of the ILC central complex is depicted in Figure 1. The electron and positron sources are located and laid out approximately symmetric on either side of the damping rings.

Brachmann, A.; Sheppard, J.; Zhou, F.; Poelker, M.; /SLAC

2012-04-06T23:59:59.000Z

180

Calibrated vapor generator source  

DOE Patents [OSTI]

A portable vapor generator is disclosed that can provide a controlled source of chemical vapors, such as, narcotic or explosive vapors. This source can be used to test and calibrate various types of vapor detection systems by providing a known amount of vapors to the system. The vapor generator is calibrated using a reference ion mobility spectrometer. A method of providing this vapor is described, as follows: explosive or narcotic is deposited on quartz wool, placed in a chamber that can be heated or cooled (depending on the vapor pressure of the material) to control the concentration of vapors in the reservoir. A controlled flow of air is pulsed over the quartz wool releasing a preset quantity of vapors at the outlet. 10 figs.

Davies, J.P.; Larson, R.A.; Goodrich, L.D.; Hall, H.J.; Stoddard, B.D.; Davis, S.G.; Kaser, T.G.; Conrad, F.J.

1995-09-26T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Voltage controlled current source  

DOE Patents [OSTI]

A seven decade, voltage controlled current source is described for use in testing intermediate range nuclear instruments that covers the entire test current range of from 10 picoamperes to 100 microamperes. High accuracy is obtained throughout the entire seven decades of output current with circuitry that includes a coordinated switching scheme responsive to the input signal from a hybrid computer to control the input voltage to an antilog amplifier, and to selectively connect a resistance to the antilog amplifier output to provide a continuous output current source as a function of a preset range of input voltage. An operator controlled switch provides current adjustment for operation in either a real-time simulation test mode or a time response test mode.

Casne, Gregory M. (Pittsburgh, PA)

1992-01-01T23:59:59.000Z

182

Evaluated teletherapy source library  

DOE Patents [OSTI]

The Evaluated Teletherapy Source Library (ETSL) is a system of hardware and software that provides for maintenance of a library of useful phase space descriptions (PSDs) of teletherapy sources used in radiation therapy for cancer treatment. The PSDs are designed to be used by PEREGRINE, the all-particle Monte Carlo dose calculation system. ETSL also stores other relevant information such as monitor unit factors (MUFs) for use with the PSDs, results of PEREGRINE calculations using the PSDs, clinical calibration measurements, and geometry descriptions sufficient for calculational purposes. Not all of this information is directly needed by PEREGRINE. It also is capable of acting as a repository for the Monte Carlo simulation history files from which the generic PSDs are derived.

Cox, Lawrence J. (Los Alamos, NM); Schach Von Wittenau, Alexis E. (Livermore, CA)

2000-01-01T23:59:59.000Z

183

The European Spallation Source  

SciTech Connect (OSTI)

The European Spallation Source (ESS) is a 5 MW, 2.5 GeV long pulse proton linac, to be built and commissioned in Lund, Sweden. The Accelerator Design Update (ADU) project phase is under way, to be completed at the end of 2012 by the delivery of a Technical Design Report. Improvements to the 2003 ESS design will be summarised, and the latest design activities will be presented.

Peggs, S; Eshraqi, M; Hahn, H; Jansson, A; Lindroos, M; Ponton, A; Rathsman, K; Trahern, G; Bousso, S; Calaga, R; Devanz, G; Duperrier, R D; Eguia, J; Gammino, S; Moller, S P; Oyon, C; Ruber, R.J.M.Y.

2011-03-01T23:59:59.000Z

184

Capillary discharge source  

DOE Patents [OSTI]

Debris generation from an EUV electric discharge plasma source device can be significantly reduced or essentially eliminated by encasing the electrodes with dielectric or electrically insulating material so that the electrodes are shielded from the plasma, and additionally by providing a path for the radiation to exit wherein the electrodes are not exposed to the area where the radiation is collected. The device includes: (a) a body, which is made of an electrically insulating material, that defines a capillary bore that has a proximal end and a distal end and that defines at least one radiation exit; (b) a first electrode that defines a first channel that has a first inlet end that is connected to a source of gas and a first outlet end that is in communication with the capillary bore, wherein the first electrode is positioned at the distal end of the capillary bore; (c) a second electrode that defines a second channel that has a second inlet end that is in communication with the capillary bore and an outlet end, wherein the second electrode is positioned at the proximal end of the capillary bore; and (d) a source of electric potential that is connected across the first and second electrodes, wherein radiation generated within the capillary bore is emitted through the at least one radiation exit and wherein the first electrode and second electrode are shielded from the emitted radiation.

Bender, III, Howard Albert

2003-11-25T23:59:59.000Z

185

SYNCHROTRON RADIATION SOURCES  

SciTech Connect (OSTI)

Synchrotron radiation is a very bright, broadband, polarized, pulsed source of light extending from the infrared to the x-ray region. It is an extremely important source of Vacuum Ultraviolet radiation. Brightness is defined as flux per unit area per unit solid angle and is normally a more important quantity than flux alone particularly in throughput limited applications which include those in which monochromators are used. It is well known from classical theory of electricity and magnetism that accelerating charges emit electromagnetic radiation. In the case of synchrotron radiation, relativistic electrons are accelerated in a circular orbit and emit electromagnetic radiation in a broad spectral range. The visible portion of this spectrum was first observed on April 24, 1947 at General Electric's Schenectady facility by Floyd Haber, a machinist working with the synchrotron team, although the first theoretical predictions were by Lienard in the latter part of the 1800's. An excellent early history with references was presented by Blewett and a history covering the development of the utilization of synchrotron radiation was presented by Hartman. Synchrotron radiation covers the entire electromagnetic spectrum from the infrared region through the visible, ultraviolet, and into the x-ray region up to energies of many 10's of kilovolts. If the charged particles are of low mass, such as electrons, and if they are traveling relativistically, the emitted radiation is very intense and highly collimated, with opening angles of the order of 1 milliradian. In electron storage rings there are three possible sources of synchrotron radiation; dipole (bending) magnets; wigglers, which act like a sequence of bending magnets with alternating polarities; and undulators, which are also multi-period alternating magnet systems but in which the beam deflections are small resulting in coherent interference of the emitted light.

HULBERT,S.L.; WILLIAMS,G.P.

1998-07-01T23:59:59.000Z

186

Compact ion accelerator source  

DOE Patents [OSTI]

An ion source includes a conductive substrate, the substrate including a plurality of conductive nanostructures with free-standing tips formed on the substrate. A conductive catalytic coating is formed on the nanostructures and substrate for dissociation of a molecular species into an atomic species, the molecular species being brought in contact with the catalytic coating. A target electrode placed apart from the substrate, the target electrode being biased relative to the substrate with a first bias voltage to ionize the atomic species in proximity to the free-standing tips and attract the ionized atomic species from the substrate in the direction of the target electrode.

Schenkel, Thomas; Persaud, Arun; Kapadia, Rehan; Javey, Ali

2014-04-29T23:59:59.000Z

187

The European Spallation Source  

SciTech Connect (OSTI)

In 2003 the joint European effort to design a European Spallation Source (ESS) resulted in a set of reports, and in May 2009 Lund was agreed to be the ESS site. The ESS Scandinavia office has since then worked on setting all the necessary legal and organizational matters in place so that the Design Update and construction can be started in January 2011, in collaboration with European partners. The Design Update phase is expected to end in 2012, to be followed by a construction phase, with first neutrons expected in 2018-2019.

Lindroos M.; Calaga R.; Bousson S.; Danared H.; Devanz G. et al

2011-04-20T23:59:59.000Z

188

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 TheStevenAdministrationPhotometric Variations asPhoton Source

189

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

190

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

191

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalancedDepartmentRestrictions onSBBiodiesel | DepartmentSLACofof98-02|10,SOURCE

192

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive SolarCenter |Photoinduced electronPhoton Source

193

Sources of tritium  

SciTech Connect (OSTI)

A review of tritium sources is presented. The tritium production and release rates are discussed for light water reactors (LWRs), heavy water reactors (HWRs), high temperature gas cooled reactors (HTGRs), liquid metal fast breeder reactors (LMFBRs), and molten salt breeder reactors (MSBRs). In addition, release rates are discussed for tritium production facilities, fuel reprocessing plants, weapons detonations, and fusion reactors. A discussion of the chemical form of the release is included. The energy producing facilities are ranked in order of increasing tritium production and release. The ranking is: HTGRs, LWRs, LMFBRs, MSBRs, and HWRs. The majority of tritium has been released in the form of tritiated water.

Phillips, J.E.; Easterly, C.E.

1980-12-01T23:59:59.000Z

194

Figures xiii Preface xix  

E-Print Network [OSTI]

? 2 What Software Testing Is--and Isn't 3 What Is Different about Testing Object-Oriented Software? 5 Overview of Our Testing Approach 6 Test Early 7 Test Often 7 Test Enough 8 The Testing Perspective 8 #12;vi Contents Chapter 2 The Testing Perspective 15 Testing Perspective 15 Object-Oriented Concepts

McGregor, John D.

195

This Article Figures Only  

E-Print Network [OSTI]

by mine wastes and smelter emissions with 100-fold more soil Zn than Cd. Although many plant species can

Sparks, Donald L.

196

Figure 1. Top: Theoretical  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Top: Theoretical prediction of capacitance of nanoporous electrodes in dipolar solvent (red) versus ionic liquid (black- Jiang, 2013a); Middle: Activated graphene electrode in...

197

MECS Fuel Oil Figures  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 6330 0 14343 342Cubic Feet)7,518,071Publication:

198

Numerical Chladni figures  

E-Print Network [OSTI]

Chladni patterns of vibrating membranes or thin plates faszinated the people already in the eighteenth century. As a simple way to visualize acoustic phenomena it is a valuable experiment for beginners' courses. In this paper I present NumChladni, an interactive tool for studying arbitrary two-dimensional vibrating membranes based on the Finite Element method. I also describe the straightforward approach of the underlying mathematical details and give some examples. NumChladni is directly applicable in the undergraduate classroom as, for example, complementary application to experimental setups.

MŁller, Thomas

2013-01-01T23:59:59.000Z

199

Federal Funding Sources of Information Sources for Automatic Funding Notices  

E-Print Network [OSTI]

;Federal Funding Sources of Information r Grant Programs & Deadlines q World Health Organization - GrantFederal Funding Sources of Information Sources for Automatic Funding Notices q Catalogue of Federal Domestic Assistance q Grants.Gov q FedBizOpps q The Foundation Center r RFP Bulletin r Philanthropy News

200

Application of optical triangulation profilometry and optical phase ranging profilometry to the figure evaluation of solar mirrors  

SciTech Connect (OSTI)

The techniques of optical triangulation profilometry (OTP) and optical phase ranging profilometry (OPRP) are proposed for evaluation of the figure of solar mirrors. The theoretical basis for each method is discussed and the results of initial feasibility experiments are reported. In OTP and OPRP the de-specularized mirror surface is probed with one or more visible laser beams. In OTP, two beams are required for the triangulation of coordinates on the mirror surface. In OPRP the second laser beam is retained within the instrument to form the reference leg of a long wavelength interferometer. Both methods are particularly adaptable to computer control for fast, automated analysis of mirror surfaces. In addition the proposed devices are compact and sturdy enough for easy implementation in field evaluation programs. The experimental resolution capability of the unoptimized OTP system is greater than or equal to 0.1 inch (2.54 mm). With further improvement of the beam projection and coincidence assessment systems, the design resolution goal of greater than or equal to 0.1 mm appears achievable. The results of the preliminary resolution capability experiments on the OPRP system are inconclusive. This is thought to be a result of poor performance of components comprising the modulation and detection subsystems. A full assessment of OPRP capability will require a further investigation effort.

Griffin, J.W.; Lind, M.A.

1980-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Advanced Photon Source Upgrade Project  

ScienceCinema (OSTI)

Upgrade to Advanced Photon Source announced by Department Of Energy. Read more: http://go.usa.gov/ivZ

Mitchell, John; Gibson, Murray; Young, Linda; Joachimiak, Andrzej

2013-04-19T23:59:59.000Z

202

Figure 2 illustrates the proposed arrangement of the system value model for a given UAV design. The properties of the UAV system are split into five categories  

E-Print Network [OSTI]

Figure 2 illustrates the proposed arrangement of the system value model for a given UAV design. The properties of the UAV system are split into five categories: performance, acquisition cost, supportability of mission success minus the life-cycle-cost of the UAV system. This simplified value model accounts

Sóbester, András

203

Figure 1. (a) Various contact angles of water droplets on hydrophilic surface terminated by OH after standard cleaning 1 (SC1) and  

E-Print Network [OSTI]

SAM converge; (b) SEM images of SWNTs grown on substrate shown in (a) after catalyst dip-coating. High a self-assembled monolayer (SAM) is both simple and nondestructive.5 In addition, the theoretically perfect flatness of a SAM makes the topography-induced effect negligible. Figure 1a shows the profiles

Maruyama, Shigeo

204

Le TRAIT De la lettre la figure, Vol. 1, ds. B. Bonhomme, M. Symington, S. Ballestra-Puech, L'Harmattan, 217-231, mai 2007.  

E-Print Network [OSTI]

Le TRAIT De la lettre à la figure, Vol. 1, éds. B. Bonhomme, M. Symington, S. Ballestra-Puech, L'Harmattan. Bonhomme, M. Symington, S. Ballestra-Puech, L'Harmattan, 217-231, mai 2007. 2 Feuilleter le catalogue de l

Paris-Sud XI, Université de

205

Development of A Cryogenic Drift Cell Spectrometer and Methods for Improving the Analytical Figures of Merit for Ion Mobility-Mass Spectrometry Analysis  

E-Print Network [OSTI]

A cryogenic (325-80 K) ion mobility-mass spectrometer was designed and constructed in order to improve the analytical figures-of-merit for the chemical analysis of small mass analytes using ion mobility-mass spectrometry. The instrument incorporates...

May, Jody C.

2010-10-12T23:59:59.000Z

206

Figure 1. Day 1 SPC Fire Weather Outlook graphic showing a critical area over parts of the western U.S.,  

E-Print Network [OSTI]

Figure 1. Day 1 SPC Fire Weather Outlook graphic showing a critical area over parts of the western. INTRODUCTION The Storm Prediction Center (SPC) in Norman, OK prepares national Fire Weather Outlooks valid thunderstorms, result in a significant threat of wildfires. The SPC Fire Weather Outlook contains both a text

207

How many people named Malcom do you think live in Colombia, S.A.? I have no idea but figured it would be a  

E-Print Network [OSTI]

How many people named Malcom do you think live in Colombia, S.A.? I have no idea but figured in Newark for two years before going back to Colombia. He worked for several companies in Colombia and is ranked fifth in Colombia in his age group. He won three med- als in the Pan American Cup held in Miami

Bieber, Michael

208

Figure 1. Ankle behavior can be approximated by a linear torsional spring in the progression stage of the stance phase of normal gait.  

E-Print Network [OSTI]

Figure 1. Ankle behavior can be approximated by a linear torsional spring in the progression stage of the stance phase of normal gait. Abstract--In this paper we explore the mechanical behavior of the ankle in the progression stage of stance during normal walking. We show that the torque/angle behavior of the ankle during

Dollar, Aaron M.

209

Sample Self-Heating in the Portable Dilution Refrigerator Figure 1. Self-heating of a model sample in a dilution refrigerator. Sample temperature is  

E-Print Network [OSTI]

1 Sample Self-Heating in the Portable Dilution Refrigerator Figure 1. Self-heating of a model were curious as to what the internal temperature of the sample may have been as it was heating ~ 6 pW, self heating begins to occur. The most dramatic result of this test was that a temperature

Weston, Ken

210

Assignment Carbon Footprints Name__Lachniet__ 1) See Figure 1.1a at the back of the assignment (from IPCC)  

E-Print Network [OSTI]

Assignment Carbon Footprints Name__Lachniet__ 1) See Figure 1.1a at the back capita, relative to other countries. 3) Use the carbon footprint calculator at 1) http utility bill. Use the # of people living in your house. a) What is your carbon footprint, in metric

Lachniet, Matthew S.

211

Design and Simulation for Architectural Geometry Figure 1: Daytime and nighttime scenes of designed roof by using the developed computational tools  

E-Print Network [OSTI]

roof by using the developed computational tools 031.PDF Keywords: Architectural Geometry, Procedural an innovative computational design tool used to edit architectural geometry interactively and demonstratesDesign and Simulation for Architectural Geometry Figure 1: Daytime and nighttime scenes of designed

212

FIGURE 2. -Immunodiffusion comparison of Vibrio anguil-larum 775 and Vibrio sp. 1669. Wells I, 3, and 5 contain V. an-  

E-Print Network [OSTI]

4 FIGURE 2. -Immunodiffusion comparison of Vibrio anguil- larum 775 and Vibrio sp. 1669. Wells I, 3, and 5 contain V. an- guillarum 775 sonicate and wells 2, 4, and 6 contain Vibrio sp. 1669 sonicate disease in young salmon. J. Compo Patho!' 77;419-423. RUCKER, R. R. 1959. Vibrio infections among marine

213

Infrared source test  

SciTech Connect (OSTI)

The purpose of the Infrared Source Test (IRST) is to demonstrate the ability to track a ground target with an infrared sensor from an airplane. The system is being developed within the Advance Technology Program`s Theater Missile Defense/Unmanned Aerial Vehicle (UAV) section. The IRST payload consists of an Amber Radiance 1 infrared camera system, a computer, a gimbaled mirror, and a hard disk. The processor is a custom R3000 CPU board made by Risq Modular Systems, Inc. for LLNL. The board has ethernet, SCSI, parallel I/O, and serial ports, a DMA channel, a video (frame buffer) interface, and eight MBytes of main memory. The real-time operating system VxWorks has been ported to the processor. The application code is written in C on a host SUN 4 UNIX workstation. The IRST is the result of a combined effort by physicists, electrical and mechanical engineers, and computer scientists.

Ott, L.

1994-11-15T23:59:59.000Z

214

Thulium-170 heat source  

DOE Patents [OSTI]

An isotopic heat source is formed using stacks of thin individual layers of a refractory isotopic fuel, preferably thulium oxide, alternating with layers of a low atomic weight diluent, preferably graphite. The graphite serves several functions: to act as a moderator during neutron irradiation, to minimize bremsstrahlung radiation, and to facilitate heat transfer. The fuel stacks are inserted into a heat block, which is encased in a sealed, insulated and shielded structural container. Heat pipes are inserted in the heat block and contain a working fluid. The heat pipe working fluid transfers heat from the heat block to a heat exchanger for power conversion. Single phase gas pressure controls the flow of the working fluid for maximum heat exchange and to provide passive cooling.

Walter, Carl E. (Pleasanton, CA); Van Konynenburg, Richard (Livermore, CA); VanSant, James H. (Tracy, CA)

1992-01-01T23:59:59.000Z

215

Multiple source heat pump  

DOE Patents [OSTI]

A heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating a fluid in heat exchange relationship with a refrigerant fluid, at least three refrigerant heat exchangers, one for effecting heat exchange with the fluid, a second for effecting heat exchange with a heat exchange fluid, and a third for effecting heat exchange with ambient air; a compressor for compressing the refrigerant; at least one throttling valve connected at the inlet side of a heat exchanger in which liquid refrigerant is vaporized; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circuit and pump for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and directional flow of refrigerant therethrough for selecting a particular mode of operation. Also disclosed are a variety of embodiments, modes of operation, and schematics therefor.

Ecker, Amir L. (Duncanville, TX)

1983-01-01T23:59:59.000Z

216

Figure 1: Artificially colored image of the plasma produced with a cylindrical lens. The laser travels in the Z-  

E-Print Network [OSTI]

-dimension to form a long focus. Progress on Plasma Lens Experiments at the Final Focus Test Beam* P. Kwok2, P. Chen of the supersonic gas jet as the plasma source, and study on focused beam size measurement techniques. Most demonstrate plasma focusing in a setting close to the true high energy collider with negligible induced

McDonald, Kirk

217

In-Source Fragmentation and the Sources of Partially Tryptic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

using three biological samples, including a standard protein mixture, a mouse brain tissue homogenate, and a mouse plasma sample. Since the in-source fragments of a...

218

Portable Source Identification Device  

SciTech Connect (OSTI)

U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nationís ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet in the air, allowing a wide vertical scanning range.

Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

2005-08-01T23:59:59.000Z

219

NATIONAL SYNCHROTRON LIGHT SOURCE ACTIVITY REPORT 1998.  

SciTech Connect (OSTI)

In FY 1998, following the 50th Anniversary Year of Brookhaven National Laboratory, Brookhaven Science Associates became the new Managers of BNL. The new start is an appropriate time to take stock of past achievements and to renew or confirm future goals. During the 1998 NSLS Annual Users Meeting (described in Part 3 of this Activity Report), the DOE Laboratory Operations Board, Chaired by the Under Secretary for Energy, Ernest Moniz met at BNL. By chance all the NSLS Chairmen except Martin Blume (acting NSLS Chair 84-85) were present as recorded in the picture. Under their leadership the NSLS has improved dramatically: (1) The VUV Ring current has increased from 100 mA in October 1982 to nearly 1 A today. For the following few years 10 Ahrs of current were delivered most weeks - NSLS now exceeds that every day. (2) When the first experiments were performed on the X-ray ring during FY1985 the electron energy was 2 GeV and the current up to 100 mA - the X-Ray Ring now runs routinely at 2.5 GeV and at 2.8 GeV with up to 350 mA of current, with a very much longer beam half-life and improved reliability. (3) Starting in FY 1984 the proposal for the Phase II upgrade, mainly for a building extension and a suite of insertion devices and their associated beamlines, was pursued - the promises were delivered in full so that for some years now the NSLS has been running with two undulators in the VUV Ring and three wigglers and an undulator in the X-Ray Ring. In addition two novel insertion devices have been commissioned in the X13 straight. (4) At the start of FY 1998 the NSLS welcomed its 7000th user - attracted by the opportunity for pursuing research with high quality beams, guaranteed not to be interrupted by 'delivery failures', and welcomed by an efficient and caring user office and first class teams of PRT and NSLS staff. R & D have lead to the possibility of running the X-Ray Ring at the higher energy of 2.8 GeV. Figure 1 shows the first user beam, which was provided thereafter for half of the running time in FY 1998. In combination with the development of narrow gap undulators this mode opens the possibility of new undulators which could produce hard X-rays in the fundamental, perhaps up to 10 keV. On 27 September 1998, a low horizontal emittance lattice became operational at 2.584 GeV. This results in approximately a 50% decrease in the horizontal beam-size on dipole bending magnet beamlines, and somewhat less of a decrease on the insertion device lines. The beam lifetime is not degraded by the low emittance lattice. This represents an important achievement, enhancing for all users the x-ray ring brightness. The reduced horizontal emittance electron beam will produce brighter x-ray beams for all the beamlines, both bending magnets and insertion devices, adding to other recent increases in the X-Ray ring brightness. During FY 1999 users will gain experience of the new running mode and plans are in place to do the same at 2.8GeV during further studies sessions. Independent evidence of the reduced emittance is shown in Figure 2. This is a pinhole camera scan showing the X-ray beam profile, obtained on the diagnostic beamline X28. Finally, work has begun to update and refine the proposal of the Phase III upgrade endorsed by the Birgeneau panel and BESAC last year. With the whole NSLS facility in teenage years and with many demonstrated enhancements available, the time has come to herald in the next stage of life at the Light Source.

ROTHMAN,E.

1999-05-01T23:59:59.000Z

220

Constricted glow discharge plasma source  

DOE Patents [OSTI]

A constricted glow discharge chamber and method are disclosed. The polarity and geometry of the constricted glow discharge plasma source is set so that the contamination and energy of the ions discharged from the source are minimized. The several sources can be mounted in parallel and in series to provide a sustained ultra low source of ions in a plasma with contamination below practical detection limits. The source is suitable for applying films of nitrides such as gallium nitride and oxides such as tungsten oxide and for enriching other substances in material surfaces such as oxygen and water vapor, which are difficult process as plasma in any known devices and methods. The source can also be used to assist the deposition of films such as metal films by providing low-energy ions such as argon ions.

Anders, Andre (Albany, CA); Anders, Simone (Albany, CA); Dickinson, Michael (San Leandro, CA); Rubin, Michael (Berkeley, CA); Newman, Nathan (Winnetka, IL)

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Figures and Data Plots from the Published Papers of the BELLE Experiment at the KEK - B Factory  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This resource provides more than 300 citations to preprints and papers with the figures from each one pulled out separately for easy access and downloading. These are physics publications. Be sure to also see the page of Technical Journal publications at http://belle.kek.jp/belle/bellenim/index.htm and the lists of conference presentations from 2000 through 2009. Belle is a high-energy physics (HEP) experiment that began in 1999 at the KEK B-factory in Japan under the direction of the international Belle Collaboration. The original Letter of Intent from the Collaboration stated their scientific goal as follows:

The laws of nature have a high degree of symmetry between matter and antimatter; violations of this symmetry, the so-called CP violations, are only seen as a small effect in the decays of neutral K mesons. Although experimental evidence for CP violation was first observed 30 years ago, we still do not understand how they occur. In 1973, Kobayashi and Maskawa (KM) noted that CP violation could be accommodated in the Standard Model only if there were at least six quark flavors, twice the number of quark flavors known at that time. The KM model for CP violation is now considered to be an essential part of the Standard Model. In 1980, Sanda and Carter pointed out that the KM model contained the possibility of rather sizable CP violating asymmetries in certain decay modes of the B meson. The subsequent observation of a long b quark lifetime and a large amount of mixing in the neutral B meson system indicated that it would be feasible to carry out decisive tests of the KM model by studying B meson decays. Our collaboration has been formed around the common interest of clarifying the long standing physics puzzle of CP violation. Our goal is to make a definitive test of the Standard Model∆s predictions for CP violations in the decays of B mesons. [Copied, with editing, from Letter of Intent (KEK-Report94-2, April 1994); see http://belle.kek.jp/bdocs/old_publication.html and open the Letter of Intent file]

That original Belle experiment verified the KM theory, leading to a Nobel prize in 2008 for Kobayashi and Maskawa. Belle II Collaboration is now working on additional discoveries.

222

Linac Coherent Light Source Overview  

ScienceCinema (OSTI)

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

None

2013-05-29T23:59:59.000Z

223

Linac Coherent Light Source Overview  

Broader source: Energy.gov [DOE]

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

224

Alternative Energy Sources Ė Myths and Realities  

E-Print Network [OSTI]

Alternative Energy Sources - Myths and Realities Walterneed to think about alternative energy sources; the worlddepletion of oil? Alternative energy sources can be divided

Youngquist, Walter

1998-01-01T23:59:59.000Z

225

Figure 1. The wet area is flooded by damming up a small stream adjacent to the study area once a year for a period of 2-3 months. By  

E-Print Network [OSTI]

Figure 1. The wet area is flooded by damming up a small stream adjacent to the study area once. Figure 1.g The wet area is flooded by damming up a small streamded by damming up a smded by damwet area Vegetation data are obtained from two ri- parian grassland sites with strong hydro- logical gradients

Schierup, Mikkel Heide

226

Figure 1: A boxcar is towed without friction up a track at an angle 1 with respect to the horizontal. The mass inside the boxcar hangs at an angle 2 with respect to the top of the boxcar.  

E-Print Network [OSTI]

a m 1 2 Figure 1: A boxcar is towed without friction up a track at an angle 1 with respect: Boxcar on a Hill In the figure, a boxcar of mass M is being towed up a hill by train car without friction. It is accelerating up the slope with a constant acceleration a. Inside the boxcar, an object of mass m hangs

Texas at Austin. University of

227

Review Problems 2-72 The deflection of the spring of the two-piston cylinder with a spring shown in the figure is to be  

E-Print Network [OSTI]

2-31 Review Problems 2-72 The deflection of the spring of the two-piston cylinder with a spring shown in the figure is to be determined. Analysis Summing the forces acting on the pistonN/m, the pressures in kPa (i.e., kN/m2 ) and the diameters in m units. 2-73 The pressure in chamber 1 of the two-piston

Bahrami, Majid

228

The integration of renewable energy sources into electric power transmission systems  

SciTech Connect (OSTI)

Renewable energy technologies such as photovoltaics, solar thermal power plants, and wind turbines are nonconventional, environmentally attractive sources of energy that can be considered for electric power generation. Many of the areas with abundant renewable energy resources (very sunny or windy areas) are far removed from major load centers. Although electrical power can be transmitted over long distances of many hundreds of miles through high-voltage transmission lines, power transmission systems often operate near their limits with little excess capacity for new generation sources. This study assesses the available capacity of transmission systems in designated abundant renewable energy resource regions and identifies the requirements for high-capacity plant integration in selected cases. In general, about 50 MW of power from renewable sources can be integrated into existing transmission systems to supply local loads without transmission upgrades beyond the construction of a substation to connect to the grid. Except in the Southwest, significant investment to strengthen transmission systems will be required to support the development of high-capacity renewable sources of 1000 MW or greater in areas remote from major load centers. Cost estimates for new transmission facilities to integrate and dispatch some of these high-capacity renewable sources ranged from several million dollars to approximately one billion dollars, with the latter figure an increase in total investment of 35%, assuming that the renewable source is the only user of the transmission facility.

Barnes, P.R.; Dykas, W.P.; Kirby, B.J.; Purucker, S.L. [Oak Ridge National Lab., TN (United States); Lawler, J.S. [Univ. of Tennessee, Knoxville, TN (United States)

1995-07-01T23:59:59.000Z

229

Hollow electrode plasma excitation source  

DOE Patents [OSTI]

A plasma source incorporates a furnace as a hollow anode, while a coaxial cathode is disposed therewithin. The source is located in a housing provided with an ionizable gas such that a glow discharge is produced between anode and cathode. Radiation or ionic emission from the glow discharge characterizes a sample placed within the furnace and heated to elevated temperatures. 5 figs.

Ballou, N.E.

1992-04-14T23:59:59.000Z

230

BSTBacterial Source Tracking Conference Proceedings  

E-Print Network [OSTI]

BSTBacterial Source Tracking Conference Proceedings 2012 Bacterial Source Tracking State Conference Conference Proceedings Prepared by: Lucas Gregory, Texas Water Resources Institute Courtney Smith of the Science Conference Texas Water Resources Institute TR-427 June 2012 #12;#12;Texas Water Resources

231

Particle Acceleration in Astrophysical Sources  

E-Print Network [OSTI]

Astrophysical sources are extremely efficient accelerators. Some sources emit photons up to multi-TeV energies, a signature of the presence, within them, of particles with energies much higher than those achievable with the largest accelerators on Earth. Even more compelling evidence comes from the study of Cosmic Rays, charged relativistic particles that reach the Earth with incredibly high energies: at the highest energy end of their spectrum, these subatomic particles are carrying a macroscopic energy, up to a few Joules. Here I will address the best candidate sources and mechanisms as cosmic particle accelerators. I will mainly focus on Galactic sources such as Supernova Remnants and Pulsar Wind Nebulae, which being close and bright, are the best studied among astrophysical accelerators. These sources are held responsible for most of the energy that is put in relativistic particles in the Universe, but they are not thought to accelerate particles up to the highest individual energies, $\\approx 10^{20}$ eV...

Amato, Elena

2015-01-01T23:59:59.000Z

232

Sealed source peer review plan  

SciTech Connect (OSTI)

Sealed sources are known quantities of radioactive materials that have been encapsulated in quantities that produce known radiation fields. Sealed sources have multiple uses ranging from instrument calibration sources to sources that produce radiation fields for experimental applications. The Off-Site Source Recovery (OSR) Project at Los Alamos National Laboratory (LANL), created in 1999, under the direction of the Waste Management Division of the U.S. Department of Energy (DOE) Albuquerque has been assigned the responsibility to recover and manage excess and unwanted radioactive sealed sources from the public and private sector. LANL intends to ship drums containing qualified sealed sources to the Waste Isolation Pilot Plant (WIPP) for disposal. Prior to shipping, these drums must be characterized with respect to radiological content and other parameters. The U. S. Environmental Protection Agency (EPA) requires that ten radionulcides be quantified and reported for every container of waste to be disposed in the WIPP. The methods traditionally approved by the EPA include non-destructive assay (NDA) in accordance with Appendix A of the Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (DOE, 2002) (CH WAC). However, because of the nature and pedigree of historical records for sealed sources and the technical infeasibility of performing NDA on these sources, LANL proposes to characterize the content of these waste drums using qualified existing radiological data in lieu of direct measurement. This plan describes the process and documentation requirements for the use of the peer review process to qualify existing data for sealed radiological sources in lieu of perfonning radioassay. The peer review process will be performed in accordance with criteria provided in 40 CFR {section} 194.22 which specifies the use of the NUREG 1297 guidelines. The plan defines the management approach, resources, schedule, and technical requirements for the subject peer review.

Feldman, Alexander [Los Alamos National Laboratory; Leonard, Lee [RETIRED; Burns, Ron [CONTRACTOR

2009-01-01T23:59:59.000Z

233

Environmental Technology Verification of Mobile Sources Control...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Environmental Technology Verification of Mobile Sources Control Technologies Environmental Technology Verification of Mobile Sources Control Technologies 2005 Diesel Engine...

234

Diversity employment and recruitment sources  

SciTech Connect (OSTI)

Effective human resources management has been identified as one of four critical success factors in the Department of Energy Strategic Plan. The Plan states relative to this factor: ``The Department seeks greater alignment of resources with agency priorities and increased diversification of the workforce, including gender, ethnicity, age, and skills. This diversification will bring new thinking and perspectives that heretofore have not had a voice in departmental decision-making.`` This Guide has been developed as a key tool to assist Department of Energy management and administrative staff in achieving Goal 2 of this critical success factor, which is to ``Ensure a diverse and talented workforce.`` There are numerous sources from which to recruit minorities, women and persons with disabilities. Applying creativity and proactive effort, using traditional and non-traditional approaches, and reaching out to various professional, academic and social communities will increase the reservoir of qualified candidates from which to make selections. In addition, outreach initiatives will undoubtedly yield further benefits such as a richer cultural understanding and diversity awareness. The resource listings presented in this Guide are offered to encourage active participation in the diversity recruitment process. This Guide contains resource listings by state for organizations in the following categories: (1) African American Recruitment Sources; (2) Asian American/Pacific Islander Recruitment Sources; (3) Hispanic Recruitment Sources; (4) Native American/Alaskan Native Recruitment Sources; (5) Persons with Disabilities Recruitment Sources; and (6) Women Recruitment Sources.

Not Available

1994-08-01T23:59:59.000Z

235

International Data on Radiological Sources  

SciTech Connect (OSTI)

ABSTRACT The mission of radiological dispersal device (RDD) nuclear forensics is to identify the provenance of nuclear and radiological materials used in RDDs and to aid law enforcement in tracking nuclear materials and routes. The application of databases to radiological forensics is to match RDD source material to a source model in the database, provide guidance regarding a possible second device, and aid the FBI by providing a short list of manufacturers and distributors, and ultimately to the last legal owner of the source. The Argonne/Idaho National Laboratory RDD attribution database is a powerful technical tool in radiological forensics. The database (1267 unique vendors) includes all sealed sources and a device registered in the U.S., is complemented by data from the IAEA Catalogue, and is supported by rigorous in-lab characterization of selected sealed sources regarding physical form, radiochemical composition, and age-dating profiles. Close working relationships with global partners in the commercial sealed sources industry provide invaluable technical information and expertise in the development of signature profiles. These profiles are critical to the down-selection of potential candidates in either pre- or post- event RDD attribution. The down-selection process includes a match between an interdicted (or detonated) source and a model in the database linked to one or more manufacturers and distributors.

Martha Finck; Margaret Goldberg

2010-07-01T23:59:59.000Z

236

Three chamber negative ion source  

DOE Patents [OSTI]

It is an object of this invention provide a negative ion source which efficiently provides a large flux of negatively ionized particles. This invention provides a volume source of negative ions which has a current density sufficient for magnetic fusion applications and has electrons suppressed from the output. It is still another object of this invention to provide a volume source of negative ions which can be electrostatically accelerated to high energies and subsequently neutralized to form a high energy neutral beam for use with a magnetically confined plasma.

Leung, K.N.; Ehlers, K.W.; Hiskes, J.R.

1983-11-10T23:59:59.000Z

237

Radiation source with shaped emission  

DOE Patents [OSTI]

Employing a source of radiation, such as an electric discharge source, that is equipped with a capillary region configured into some predetermined shape, such as an arc or slit, can significantly improve the amount of flux delivered to the lithographic wafers while maintaining high efficiency. The source is particularly suited for photolithography systems that employs a ringfield camera. The invention permits the condenser which delivers critical illumination to the reticle to be simplified from five or more reflective elements to a total of three or four reflective elements thereby increasing condenser efficiency. It maximizes the flux delivered and maintains a high coupling efficiency. This architecture couples EUV radiation from the discharge source into a ring field lithography camera.

Kubiak, Glenn D.; Sweatt, William C.

2003-05-13T23:59:59.000Z

238

Next Generation Light Source Workshops  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

239

U.S. Energy Information Administration (EIA) - Source  

Gasoline and Diesel Fuel Update (EIA)

shows the next-largest percentage improvement, followed by lighting and electric space heating (Figure 80). The Best Available Demand Technology case demonstrates significant...

240

U.S. Energy Information Administration (EIA) - Source  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

in renewable electricity generation in the power sector consists of generation from wind and biomass facilities (Figure 3). The growth in generation from wind plants is driven...

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

U.S. Energy Information Administration (EIA) Indexed Site

Gallons per Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1995...

242

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Gallons per Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1997...

243

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Gasoline and Diesel Fuel Update (EIA)

Gallons per Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1996...

244

U.S. Energy Information Administration (EIA) - Source  

Gasoline and Diesel Fuel Update (EIA)

section legs Legislation and Regulations Introduction.... Read full section Cross-State air pollution rule.... Read full section figure data Reference Case Tables Table 1. Total...

245

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

1997-01-01T23:59:59.000Z

246

Multilevel cascade voltage source inverter with separate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

Peng, F.Z.; Lai, J.S.

1997-06-24T23:59:59.000Z

247

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

2002-01-01T23:59:59.000Z

248

Research on fusion neutron sources  

SciTech Connect (OSTI)

The use of fusion devices as powerful neutron sources has been discussed for decades. Whereas the successful route to a commercial fusion power reactor demands steady state stable operation combined with the high efficiency required to make electricity production economic, the alternative approach to advancing the use of fusion is free of many of complications connected with the requirements for economic power generation and uses the already achieved knowledge of Fusion physics and developed Fusion technologies. 'Fusion for Neutrons' (F4N), has now been re-visited, inspired by recent progress achieved on comparably compact fusion devices, based on the Spherical Tokamak (ST) concept. Freed from the requirement to produce much more electricity than used to drive it, a fusion neutron source could be efficiently used for many commercial applications, and also to support the goal of producing energy by nuclear power. The possibility to use a small or medium size ST as a powerful or intense steady-state fusion neutron source (FNS) is discussed in this paper in comparison with the use of traditional high aspect ratio tokamaks. An overview of various conceptual designs of compact fusion neutron sources based on the ST concept is given and they are compared with a recently proposed Super Compact Fusion Neutron Source (SCFNS), with major radius as low as 0.5 metres but still able to produce several MW of neutrons in a steady-state regime.

Gryaznevich, M. P. [Tokamak Solutions UK, Culham Science Centre, Abingdon, OXON, OX133DB (United Kingdom)

2012-06-19T23:59:59.000Z

249

Miniature x-ray source  

DOE Patents [OSTI]

A miniature x-ray source utilizing a hot filament cathode. The source has a millimeter scale size and is capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature source consists of a compact vacuum tube assembly containing the hot filament cathode, an anode, a high voltage feedthru for delivering high voltage to the cathode, a getter for maintaining high vacuum, a connector for initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is fabricated from highly x-ray transparent materials, such as sapphire, diamond, or boron nitride.

Trebes, James E. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA)

2000-01-01T23:59:59.000Z

250

Miniature x-ray source  

DOE Patents [OSTI]

A miniature x-ray source capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature x-ray source comprises a compact vacuum tube assembly containing a cathode, an anode, a high voltage feedthru for delivering high voltage to the anode, a getter for maintaining high vacuum, a connection for an initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is highly x-ray transparent and made, for example, from boron nitride. The compact size and potential for remote operation allows the x-ray source, for example, to be placed adjacent to a material sample undergoing analysis or in proximity to the region to be treated for medical applications.

Trebes, James E. (Livermore, CA); Stone, Gary F. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA); Chornenky, Victor I. (Minnetonka, MN)

2002-01-01T23:59:59.000Z

251

Compact portable electric power sources  

SciTech Connect (OSTI)

This report provides an overview of recent advances in portable electric power source (PEPS) technology and an assessment of emerging PEPS technologies that may meet US Special Operations Command`s (SOCOM) needs in the next 1--2- and 3--5-year time frames. The assessment was performed through a literature search and interviews with experts in various laboratories and companies. Nineteen PEPS technologies were reviewed and characterized as (1) PEPSs that meet SOCOM requirements; (2) PEPSs that could fulfill requirements for special field conditions and locations; (3) potentially high-payoff sources that require additional R and D; and (4) sources unlikely to meet present SOCOM requirements. 6 figs., 10 tabs.

Fry, D.N.; Holcomb, D.E.; Munro, J.K.; Oakes, L.C.; Matson, M.J.

1997-02-01T23:59:59.000Z

252

Zevenhoven & Kilpinen CROSS EFFECTS, TOTAL SYSTEM LAY-OUT 13.6.2001 10-1 Figure 10.1 Typical pulverised coal combustion and gas clean-up system: dry scrubber +  

E-Print Network [OSTI]

pulverised coal combustion and gas clean-up system: dry scrubber + baghouse filter for SO2 and particulate For a conventional pulverised coal-fired power plant a set-up is shown in Figure 10.1, with a gas clean-up system scrubber (pH ~ 6) 60 - 70 7 Re-heater 350 - 400 8 SCR DeNOx 300 - 400 9 Active coke bed 100 - 150 Figure 10

Zevenhoven, Ron

253

Water cooled metal optics for the Advanced Light Source  

SciTech Connect (OSTI)

The program for providing water cooled metal optics for the Advanced Light Source at Berkeley is reviewed with respect to fabrication and metrology of the surfaces. Materials choices, surface figure and smoothness specifications, and metrology systems for measuring the plated metal surfaces are discussed. Results from prototype mirrors and grating blanks will be presented, which show exceptionally low microroughness and mid-period error. We will briefly describe out improved version of the Long Trace Profiler, and its importance to out metrology program. We have completely redesigned the mechanical, optical and computational parts of the profiler system with the cooperation of Peter Takacs of Brookhaven, Continental Optical, and Baker Manufacturing. Most important is that one of our profilers is in use at the vendor to allow testing during fabrication. Metrology from the first water cooled mirror for an ALS beamline is presented as an example. The preplating processing and grinding and polishing were done by Tucson Optical. We will show significantly better surface microroughness on electroless nickel, over large areas, than has been reported previously.

McKinney, W.R.; Irick, S.C. [Lawrence Berkeley Lab., CA (United States); Lunt, D.L.J. [Tucson Optical Research Corp., AZ (United States)

1991-10-28T23:59:59.000Z

254

SOURCE PHENOMENOLOGY EXPERIMENTS IN ARIZONA  

SciTech Connect (OSTI)

The Arizona Source Phenomenology Experiments (SPE) have resulted in an important dataset for the nuclear monitoring community. The 19 dedicated single-fired explosions and multiple delay-fired mining explosions were recorded by one of the most densely instrumented accelerometer and seismometer arrays ever fielded, and the data have already proven useful in quantifying confinement and excitation effects for the sources. It is very interesting to note that we have observed differences in the phenomenology of these two series of explosions resulting from the differences between the relatively slow (limestone) and fast (granodiorite) media. We observed differences at the two SPE sites in the way the rock failed during the explosions, how the S-waves were generated, and the amplitude behavior as a function of confinement. Our consortium's goal is to use the synergy of the multiple datasets collected during this experiment to unravel the phenomenological differences between the two emplacement media. The data suggest that the main difference between single-fired chemical and delay-fired mining explosion seismograms at regional distances is the increased surface wave energy for the latter source type. The effect of the delay-firing is to decrease the high-frequency P-wave amplitudes while increasing the surface wave energy because of the longer source duration and spall components. The results suggest that the single-fired explosions are surrogates for nuclear explosions in higher frequency bands (e.g., 6-8 Hz Pg/Lg discriminants). We have shown that the SPE shots, together with the mining explosions, are efficient sources of S-wave energy, and our next research stage is to postulate the possible sources contributing to the shear-wave energy.

Jessie L. Bonner; Brian Stump; Mark Leidig; Heather Hooper; Xiaoning (David) Yang; Rongmao Zhou; Tae Sung Kim; William R. Walter; Aaron Velasco; Chris Hayward; Diane Baker; C. L. Edwards; Steven Harder; Travis Glenn; Cleat Zeiler; James Britton; James F. Lewkowicz

2005-09-30T23:59:59.000Z

255

Quantum confinement effects on the thermoelectric figure of merit in Si/Si{sub 1{minus}x}Ge{sub x} system  

SciTech Connect (OSTI)

The Si/Si{sub 1{minus}x}Ge{sub x} quantum well system is attractive for high temperature thermoelectric applications and for demonstration of proof-of-principle for enhanced thermoelectric figure of merit Z, since the interfaces and carrier densities can be well controlled in this system. The authors report here theoretical calculations for Z in this system, and results from theoretical modeling of quantum confinement effects in the presence of {delta}-doping within the barrier layers. The {delta}-doping layers are introduced by growing very thin layers of wide band gap materials within the barrier layers in order to increase the effective barrier height within the barriers and thereby reduce the barrier width necessary for the quantum confinement of carriers within the quantum well. The overall figure of merit is thereby enhanced due to the reduced barrier width and hence reduced thermal conductivity, {kappa}. The {delta}-doping should further reduce {kappa} in the barriers by introducing phonon scattering centers within the barrier region. The temperature dependence of Z for Si quantum wells is also discussed.

Sun, X.; Dresselhaus, M.S.; Wang, K.L.; Tanner, M.O.

1997-07-01T23:59:59.000Z

256

A global sourcing strategy for durable tooling  

E-Print Network [OSTI]

Competitive pressures in manufacturing industries have led to an increased utilization of strategic sourcing initiatives: among them is low cost sourcing. While low cost sourcing has been used extensively for direct ...

Vasovski, Steven

2006-01-01T23:59:59.000Z

257

Source selection of agricultural journalists in Texas  

E-Print Network [OSTI]

Journalists rely on sources in their daily routines, and the sources they choose affect news content over time. Agricultural journalists are no exception. Eleven agricultural journalists in Texas were studied to determine what types of sources...

Banks, Penelope Jean

1998-01-01T23:59:59.000Z

258

MODELING, SIMULATION AND OPTIMIZATION OF GROUND SOURCE  

E-Print Network [OSTI]

MODELING, SIMULATION AND OPTIMIZATION OF GROUND SOURCE HEAT PUMP SYSTEMS By MUHAMMAD HAIDER KHAN AND OPTIMIZATION OF GROUND SOURCE HEAT PUMP SYSTEMS Thesis Approved..................................................................................................................... 1 1.1 Overview of Ground Source Heat Pump Systems.............................................. 1 1

259

Major Source Permits (District of Columbia)  

Broader source: Energy.gov [DOE]

The District reviews designs for new pollution sources and design modifications for existing sources. Permits are issued to allow sources to emit limited and specified amounts of pollution as...

260

4th Generation ECR Ion Sources  

E-Print Network [OSTI]

4th Generation ECR Ion Sources Claude M Lyneis, D. Leitner,to developing a 4 th generation ECR ion source with an RFover current 3 rd generation ECR ion sources, which operate

Lyneis, Claude M.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Sources of stress gradients in electrodeposited Ni MEMS.  

SciTech Connect (OSTI)

The ability of future integrated metal-semiconductor micro-systems such as RF MEMS to perform highly complex functions will depend on developing freestanding metal structures that offer improved conductivity and reflectivity over polysilicon structures. For example, metal-based RF MEMS technology could replace the bulky RF system presently used in communications, navigation, and avionics systems. However, stress gradients that induce warpage of active components have prevented the implementation of this technology. Figure 1, is an interference micrograph image of a series of cantilever beams fabricated from electrodeposited Ni. The curvature in the beams was the result of stress gradients intrinsic to the electrodeposition process. To study the sources of the stress in electrodeposition of Ni we have incorporated a wafer curvature based stress sensor, the multibeam optical stress sensor, into an electrodeposition cell. We have determined that there are two regions of stress induced by electrodepositing Ni from a sulfamate-based bath (Fig 2). The stress evolution during the first region, 0-1000{angstrom}, was determined to be dependent only on the substrate material (Au vs. Cu), whereas the stress evolution during the second region, >1000{angstrom}, was highly dependent on the deposition conditions. In this region, the stress varied from +0.5 GPa to -0.5GPa, depending solely on the deposition rate. We examined four likely sources for the compressive intrinsic stress, i.e. reduction in tensile stress, and determined that only the adatom diffusion into grain boundaries model of Sheldon, et al. could account for the observed compressive stress. In the presentation, we shall discuss the compressive stress generation mechanisms considered and the ramifications of these results on fabrication of electrodeposited Ni for MEMS applications.

Hearne, Sean Joseph; Floro, Jerrold Anthony; Dyck, Christopher William

2004-06-01T23:59:59.000Z

262

Alternative Energy Sources - An Interdisciplinary Module for...  

Broader source: Energy.gov (indexed) [DOE]

Alternative Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources - An Interdisciplinary Module for Energy Education Below is information...

263

Mercury Effects, Sources and Control Measures  

E-Print Network [OSTI]

Mercury Effects, Sources and Control Measures Prepared by Alan B. Jones, Brooks Rand, Ltd., Seattle ................................................................................................................................1 MERCURY SOURCES....................................................................................................................................................................................8 Mercury dumping from naval vessels

264

RECENT PROGRESS IN HEAVY ION SOURCES  

E-Print Network [OSTI]

of hydrogen into thermonuclear fusion reactors. A summary ofFusion Plasma Sources Other sources of high charge state ions include the dense plasma in magnetic confinement thermonuclear

Clark, D.J.

2010-01-01T23:59:59.000Z

265

Lesson 2: Energy Sources Overview  

E-Print Network [OSTI]

Earth's internal heat; ­solar energy from the Sun; ­gravitaDonal energy · There are three sources of external energy: ­ solar energy: radiant energy from and some is converted to tsunami #12;Overview · Solar Energy: ­ Of the three

Chen, Po

266

Known and unknown SCUBA sources  

E-Print Network [OSTI]

Summary and discussion of some projects to use SCUBA to target sources selected at other wavebands, as well as to find new sub-mm galaxies in `blank fields': FIRBACK galaxies; Lyman break galaxies and `the Blob'; HDF flanking fields and the Groth Strip; survey of lensing cluster fields.

Douglas Scott; Colin Borys; Mark Halpern; Anna Sajina; Scott Chapman; Greg Fahlman

2000-10-25T23:59:59.000Z

267

Focused X-ray source  

DOE Patents [OSTI]

Disclosed is an intense, relatively inexpensive X-ray source (as compared to a synchrotron emitter) for technological, scientific, and spectroscopic purposes. A conical radiation pattern produced by a single foil or stack of foils is focused by optics to increase the intensity of the radiation at a distance from the conical radiator. 8 figs.

Piestrup, M.A.; Boyers, D.G.; Pincus, C.I.; Maccagno, P.

1990-08-21T23:59:59.000Z

268

Reporting of Radioactive Sealed Sources  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish U.S. Department of Energy requirements for inventory reporting, transaction reporting, verification of reporting, and assign responsibilities for reporting of radioactive sealed sources. DOE N 251.86 extends this notice until 5-6-11. No cancellations. Canceled by DOE O 231.1B

2008-02-27T23:59:59.000Z

269

EAT SMART Sources: Heart Health  

E-Print Network [OSTI]

-1- EAT SMART Sources: Heart Health American Dietetic Association Complete Food and Nutrition Guide and Promotion; Home and Garden Bulletin Number 252; August 1992. Heart Attach Signs, U.S. Department of Health and Human Services: National Institutes of Heart, Lung, and Blood Institute, NIH Publication No. 01

270

National Synchrotron Light Source II  

ScienceCinema (OSTI)

The National Synchrotron Light Source II (NSLS-II) at the U.S. Department of Energy's Brookhaven National Laboratory is a proposed new state-of-the-art medium energy storage ring designed to deliver world-leading brightness and flux with top-off operation

Steve Dierker

2010-01-08T23:59:59.000Z

271

6, 61256181, 2006 Sources and  

E-Print Network [OSTI]

and transport mechanisms of the pollutants accurately. Mexico City has a large urban fleet in a topographically of the emission inventory, verification of transport processes in air quality models and guidance for policy for the Mexico City Metropolitan Area 6126 #12;ACPD 6, 6125­6181, 2006 Sources and transport of CO and SO2

Boyer, Edmond

272

MIT inverse Compton source concept  

E-Print Network [OSTI]

A compact X-ray source based on inverse Compton scattering of a high-power laser on a high-brightness linac beam is described. The facility can operate in two modes: at high (MHz) repetition rate with flux and brilliance ...

Graves, William S.

273

Climate Change Major information sources  

E-Print Network [OSTI]

://www.ipcc.ch/ Vital Climate Graphics, at http://www.grida.no/climate/vital/ Climate Change Impacts on US, at http://www.gcrio.org/NationalAssessment/ Greenhouse Warming Prediction #12;Energy Predictions 2 Sources: Energy Information Administration (EIA); International Energy Agency (IEA) 2% growth per year, or doubling in 35 years (shortcut: 70/%=doubling) Fossil

274

Miniaturized cathodic arc plasma source  

DOE Patents [OSTI]

A cathodic arc plasma source has an anode formed of a plurality of spaced baffles which extend beyond the active cathode surface of the cathode. With the open baffle structure of the anode, most macroparticles pass through the gaps between the baffles and reflect off the baffles out of the plasma stream that enters a filter. Thus the anode not only has an electrical function but serves as a prefilter. The cathode has a small diameter, e.g. a rod of about 1/4 inch (6.25 mm) diameter. Thus the plasma source output is well localized, even with cathode spot movement which is limited in area, so that it effectively couples into a miniaturized filter. With a small area cathode, the material eroded from the cathode needs to be replaced to maintain plasma production. Therefore, the source includes a cathode advancement or feed mechanism coupled to cathode rod. The cathode also requires a cooling mechanism. The movable cathode rod is housed in a cooled metal shield or tube which serves as both a current conductor, thus reducing ohmic heat produced in the cathode, and as the heat sink for heat generated at or near the cathode. Cooling of the cathode housing tube is done by contact with coolant at a place remote from the active cathode surface. The source is operated in pulsed mode at relatively high currents, about 1 kA. The high arc current can also be used to operate the magnetic filter. A cathodic arc plasma deposition system using this source can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

Anders, Andre (Albany, CA); MacGill, Robert A. (Richmond, CA)

2003-04-15T23:59:59.000Z

275

Scientific Needs for Future X-Ray Sources in the U.S.: A White Paper  

SciTech Connect (OSTI)

Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects (Figure 1.1). The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons, and spins, as illustrated in Figure 1.1. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. Since the fundamental interaction that holds matter together is of electromagnetic origin, it is intuitively clear that electromagnetic radiation is the critical tool in the study of material properties. On the level of atoms, electrons and spins, x rays have proved especially valuable.

Falcone , Roger; Stohr, Joachim; Bergmann, Uwe; Corlett, John; Galayda, John; Hastings, Jerry; Robert Hettel, Zahid Hussain; Kirz, Janos; McCurdy, Bill; Raubenheimer, Tor; Fernando Sannibale, John Seeman; Shen, Z.-X.; Schoenlein, Robert; Zholents, Alexander; /SLAC /LBL, Berkeley

2008-10-22T23:59:59.000Z

276

National Synchrotron Light Source Activity Report 1998  

SciTech Connect (OSTI)

National Synchrotron Light Source Activity Report for period October 1, 1997 through September 30, 1998

Rothman, Eva

1999-05-01T23:59:59.000Z

277

Best Management Practice #14: Alternate Water Sources  

Broader source: Energy.gov [DOE]

Many federal facilities may have water uses that can be met with non-potable water from alternate water sources. Potentially available alternative water sources for Federal sources include municipal-supplied reclaimed water, treated gray water from on-site sanitary sources, and storm water.

278

National Synchrotron Light Source annual report 1991  

SciTech Connect (OSTI)

This report contains abstracts from research conducted at the national synchrotron light source. (LSP)

Hulbert, S.L.; Lazarz, N.N. (eds.)

1992-04-01T23:59:59.000Z

279

Best Management Practice #14: Alternative Water Sources  

Broader source: Energy.gov [DOE]

Many federal facilities may have water uses that can be met with non-potable water from alternative water sources. Potentially available alternative water sources for Federal sources include municipal-supplied reclaimed water, treated gray water from on-site sanitary sources, and storm water.

280

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and elminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an exellent moderate-priced X-ray source for lithography.

Piestrup, Melvin A. (Woodside, CA); Boyers, David G. (Mountain View, CA); Pincus, Cary (Sunnyvale, CA)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Influence of samarium on the thermoelectric figure of merit of Sm{sub x}Pb{sub 1-x}Te alloys  

SciTech Connect (OSTI)

The temperature and concentration dependences of the electrical (conductivity {sigma}, the Hall coefficient R), thermoelectric (thermovoltage {alpha}), and thermal (thermal conductivity K{sub tot}) characteristics of Sm{sub x}Pb{sub 1-x}Te alloys (x = 0, 0.02, 0.04, 0.08) are studied in the temperature range 100-500 K. Using the data for {sigma}, {alpha}, and K{sub tot}, the thermoelectric power {alpha}{sup 2}{sigma}, figure of merit Z, and efficiency {delta} are calculated. It is established that at room-temperature {alpha}{sup 2}{sigma} and Z peak at the hole concentration p Almost-Equal-To 1.2 Multiplication-Sign 10{sup 18} cm{sup -3}.

Aliev, F. F., E-mail: farzali@physics.ab.az; Hasanov, H. A., E-mail: hummat.hasanov@gmail.com [Academy of Sciences of Azerbaijan, Institute of Physics (Azerbaijan)

2012-03-15T23:59:59.000Z

282

Far-infrared Point Sources  

E-Print Network [OSTI]

The analysis of the submm anisotropies that will be mapped by the forthcoming MAP and PLANCK satellites requires careful foreground subtraction before measuring CMB fluctuations. Among these, the foreground due to IR/submm thermal radiation from dusty sources was poorly known until recent observational breakthroughs began unveiling the properties of these objects. We hereafter briefly review the observational evidence for a strong evolution of IR/submm sources with respect to the local universe explored by IRAS. We present the basic principles of a new modeling effort where consistent spectral energy distributions of galaxies are implemented into the paradigm of hierarchical clustering with the fashionable semi-analytic approach. This model provides us with specific predictions in IR/submm wavebands, that seem to reproduce the current status of the observations and help assessing the capabilities of forthcoming instruments to pursue the exploration of the deep universe at IR/submm wavelengths. Finally, the ability of the PLANCK High Frequency Instrument all-sky survey to produce a catalogue of dusty sources at submm wavelengths is briefly described.

B. Guiderdoni

1999-03-08T23:59:59.000Z

283

Compact x-ray source and panel  

DOE Patents [OSTI]

A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

Sampayon, Stephen E. (Manteca, CA)

2008-02-12T23:59:59.000Z

284

Analysis of potential combustion source impacts on acid deposition using an independently derived inventory. Volume I  

SciTech Connect (OSTI)

This project had three major objectives. The first objective was to develop a fossil fuel combustion source inventory (NO/sub x/, SO/sub x/, and hydrocarbon emissions) that would be relatively easy to use and update for analyzing the impact of combustion emissions on acid deposition in the eastern United States. The second objective of the project was to use the inventory data as a basis for selection of a number of areas that, by virtue of their importance in the acid rain issue, could be further studied to assess the impact of local and intraregional combustion sources. The third objective was to conduct an analysis of wet deposition monitoring data in the areas under study, along with pertinent physical characteristics, meteorological conditions, and emission patterns of these areas, to investigate probable relationships between local and intraregional combustion sources and the deposition of acidic material. The combustion source emissions inventory has been developed for the eastern United States. It characterizes all important area sources and point sources on a county-by-county basis. Its design provides flexibility and simplicity and makes it uniquely useful in overall analysis of emission patterns in the eastern United States. Three regions with basically different emission patterns have been identified and characterized. The statistical analysis of wet deposition monitoring data in conjunction with emission patterns, wind direction, and topography has produced consistent results for each study area and has demonstrated that the wet deposition in each area reflects the characteristics of the localized area around the monitoring sites (typically 50 to 150 miles). 8 references, 28 figures, 39 tables.

Not Available

1983-12-01T23:59:59.000Z

285

The new cold neutron chopper spectrometer at the Spallation Neutron Source: Design and performance  

SciTech Connect (OSTI)

The design and performance of the new cold neutron chopper spectrometer (CNCS) at the Spallation Neutron Source in Oak Ridge are described. CNCS is a direct-geometry inelastic time-of-flight spectrometer, designed essentially to cover the same energy and momentum transfer ranges as IN5 at ILL, LET at ISIS, DCS at NIST, TOFTOF at FRM-II, AMATERAS at J-PARC, PHAROS at LANSCE, and NEAT at HZB, at similar energy resolution. Measured values of key figures such as neutron flux at sample position and energy resolution are compared between measurements and ray tracing Monte Carlo simulations, and good agreement (better than 20% of absolute numbers) has been achieved. The instrument performs very well in the cold and thermal neutron energy ranges, and promises to become a workhorse for the neutron scattering community for quasielastic and inelastic scattering experiments.

Ehlers, G.; Podlesnyak, A. A.; Niedziela, J. L.; Iverson, E. B. [Neutron Scattering Science Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Sokol, P. E. [Department of Physics, Indiana University, Bloomington, Indiana 47405 (United States)

2011-08-15T23:59:59.000Z

286

The new Cold Neutron Chopper Spectrometer at the Spallation Neutron Source -- Design and Performance  

SciTech Connect (OSTI)

The design and performance of the new cold neutron chopper spectrometer (CNCS) at the Spallation Neutron Source in Oak Ridge are described. CNCS is a direct-geometry inelastic time-of-flight spectrometer, designed essentially to cover the same energy and momentum transfer ranges as IN5 at ILL, LET at ISIS, DCS at NIST, TOFTOF at FRM-II, AMATERAS at J-PARC, PHAROS at LANSCE, and NEAT at HZB, at similar energy resolution. Measured values of key figures such as neutron flux at sample position and energy resolution are compared between measurements and ray tracing Monte Carlo simulations, and good agreement (better than 20% of absolute numbers) has been achieved. The instrument performs very well in the cold and thermal neutron energy ranges, and promises to become a workhorse for the neutron scattering community for quasielastic and inelastic scattering experiments.

Ehlers, Georg [ORNL; Podlesnyak, Andrey A [ORNL; Niedziela, Jennifer L [ORNL; Iverson, Erik B [ORNL; Sokol, Paul E [ORNL

2011-01-01T23:59:59.000Z

287

Coupled microwave ECR and radio-frequency plasma source for plasma processing  

DOE Patents [OSTI]

In a dual plasma device, the first plasma is a microwave discharge having its own means of plasma initiation and control. The microwave discharge operates at electron cyclotron resonance (ECR), and generates a uniform plasma over a large area of about 1000 cm[sup 2] at low pressures below 0.1 mtorr. The ECR microwave plasma initiates the second plasma, a radio frequency (RF) plasma maintained between parallel plates. The ECR microwave plasma acts as a source of charged particles, supplying copious amounts of a desired charged excited species in uniform manner to the RF plasma. The parallel plate portion of the apparatus includes a magnetic filter with static magnetic field structure that aids the formation of ECR zones in the two plasma regions, and also assists in the RF plasma also operating at electron cyclotron resonance. 4 figures.

Tsai, C.C.; Haselton, H.H.

1994-03-08T23:59:59.000Z

288

Detecting fission from special nuclear material sources  

DOE Patents [OSTI]

A neutron detector system for discriminating fissile material from non-fissile material wherein a digital data acquisition unit collects data at high rate, and in real-time processes large volumes of data directly into information that a first responder can use to discriminate materials. The system comprises counting neutrons from the unknown source and detecting excess grouped neutrons to identify fission in the unknown source. The system includes a graphing component that displays the plot of the neutron distribution from the unknown source over a Poisson distribution and a plot of neutrons due to background or environmental sources. The system further includes a known neutron source placed in proximity to the unknown source to actively interrogate the unknown source in order to accentuate differences in neutron emission from the unknown source from Poisson distributions and/or environmental sources.

Rowland, Mark S. (Alamo, CA); Snyderman, Neal J. (Berkeley, CA)

2012-06-05T23:59:59.000Z

289

Multigamma-ray calibration sources  

SciTech Connect (OSTI)

We have calibrated a self-consistent set of multigamma-ray standards using the automated multi-spectrometry ..gamma..-ray counting facility at LLNL's Nuclear Chemistry Division. Pure sources of long-lived activity were produced by mass separation and/or chemical purification. The sources were counted individually and in combination on several different calibrated spectrometer systems. These systems utilize various detectors ranging from small (x-ray) detectors to large volume high-purity Ge detectors. This has allowed the use of the most ideal individual detector-efficiency characteristics for the determination of the relative ..gamma..-ray intensities. Precise energy measurements, reported earlier (Meyer, 1976) have been performed by an independent method. Both the energy and ..gamma..-ray-emission probabilities determined compare well with independently established values such as the recent ICRM intercomparison of /sup 152/Eu. We discuss our investigations aimed at resolving the shape of the efficiency response function up to 10 MeV for large volume Ge(Li) and high-purity Ge detectors. Recent results on the ..gamma..-ray-emission probabilities per decay for /sup 149/Gd and /sup 168/Tm multigamma-ray sources are discussed. For /sup 168/Tm, we deduce a 0.01% ..beta../sup -/ branch to the 87.73-keV level in /sup 168/Yb rather than the previous value which was a factor of 200 greater. In addition, we describe current cooperative efforts aimed at establishing a consistent set of data for short-lived fission products. Included are recent measurements on the bromine fission products with ..gamma.. rays up to 7 MeV.

Meyer, R.A.; Massey, T.N.

1983-05-01T23:59:59.000Z

290

CHINA SPALLATION NEUTRON SOURCE DESIGN.  

SciTech Connect (OSTI)

The China Spallation Neutron Source (CSNS) is an accelerator-based high-power project currently in preparation under the direction of the Chinese Academy of Sciences (CAS). The complex is based on an H- linear accelerator, a rapid cycling proton synchrotron accelerating the beam to 1.6 GeV, a solid tungsten target station, and five initial instruments for spallation neutron applications. The facility will operate at 25 Hz repetition rate with a phase-I beam power of about 120 kW. The major challenge is to build a robust and reliable user's facility with upgrade potential at a fractional of ''world standard'' cost.

WEI,J.

2007-01-29T23:59:59.000Z

291

Gamma source for active interrogation  

DOE Patents [OSTI]

A cylindrical gamma generator includes a coaxial RF-driven plasma ion source and target. A hydrogen plasma is produced by RF excitation in a cylindrical plasma ion generator using an RF antenna. A cylindrical gamma generating target is coaxial with the ion generator, separated by plasma and extraction electrodes which has many openings. The plasma generator emanates ions radially over 360.degree. and the cylindrical target is thus irradiated by ions over its entire circumference. The plasma generator and target may be as long as desired.

Leung, Ka-Ngo; Lou, Tak Pui; Barletta, William A.

2012-10-02T23:59:59.000Z

292

Relating to monitoring ion sources  

DOE Patents [OSTI]

The apparatus and method provide techniques for monitoring the position on alpha contamination in or on items or locations. The technique is particularly applicable to pipes, conduits and other locations to which access is difficult. The technique uses indirect monitoring of alpha emissions by detecting ions generated by the alpha emissions. The medium containing the ions is moved in a controlled manner frog in proximity with the item or location to the detecting unit and the signals achieved over time are used to generate alpha source position information.

Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM); Bounds, John Alan (Los Alamos, NM)

2002-01-01T23:59:59.000Z

293

Ion Sources - 88-Inch Cyclotron  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area.PortaldefaultIntroducing AuroraInvestorPagesSources

294

Repatriation of US sources from Brazil  

SciTech Connect (OSTI)

IAEA's interest in excess and unwanted sealed sources extends back to when radium sources were a problem throughout the world. Sta11ing in 1994, world wide IAEA member states inventoried and consolidated radium (Ra)-226 sources. IAEA then trained Regional Teams in the conditioning of Ra-226 sealed sources for long term storage, which resulted in the Regional Teams conditioning about 14,000 radium sources. These sources remained in their respective IAEA member state locations. Regional teams were seen as a way to encourage member state (local) management of a world wide problem, as well as a more cost effective solution.

Tompkins, Andrew J [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

295

Figure 12 Vehicle tracking Figure 11 Pedestrian tracking  

E-Print Network [OSTI]

-finders, infra-red obstacle detectors, GPS, Forward Looking Infra-Red (FLIR), microwave, etc. provide other

Brandt, Scott A.

296

Fluid jet electric discharge source  

DOE Patents [OSTI]

A fluid jet or filament source and a pair of coaxial high voltage electrodes, in combination, comprise an electrical discharge system to produce radiation and, in particular, EUV radiation. The fluid jet source is composed of at least two serially connected reservoirs, a first reservoir into which a fluid, that can be either a liquid or a gas, can be fed at some pressure higher than atmospheric and a second reservoir maintained at a lower pressure than the first. The fluid is allowed to expand through an aperture into a high vacuum region between a pair of coaxial electrodes. This second expansion produces a narrow well-directed fluid jet whose size is dependent on the size and configuration of the apertures and the pressure used in the reservoir. At some time during the flow of the fluid filament, a high voltage pulse is applied to the electrodes to excite the fluid to form a plasma which provides the desired radiation; the wavelength of the radiation being determined by the composition of the fluid.

Bender, Howard A. (Ripon, CA)

2006-04-25T23:59:59.000Z

297

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement  

E-Print Network [OSTI]

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement Tempe AZ USA 85287 rajub@asu.edu, rao@asu.edu ABSTRACT One immediate challenge in searching the deep web-similarity-based relevance assess- ment. When applied to the deep web these methods have two deficiencies. First

Kambhampati, Subbarao

298

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement  

E-Print Network [OSTI]

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement. Existing methods have two deficiencies for applying to the open col- lections like the deep web. First query in the deep web, the agreements between theses an- swer sets are likely to be helpful in assessing

Kambhampati, Subbarao

299

Problems with packaged sources in foreign countries  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Off-Site Source Recovery Project (OSRP), which is administered by the Los Alamos National Laboratory (LANL), removes excess, unwanted, abandoned, or orphan radioactive sealed sources that pose a potential threat to national security, public health, and safety. In total, GTRI/OSRP has been able to recover more than 25,000 excess and unwanted sealed sources from over 825 sites. In addition to transuranic sources, the GTRI/OSRP mission now includes recovery of beta/gamma emitting sources, which are of concern to both the U.S. government and the International Atomic Energy Agency (IAEA). This paper provides a synopsis of cooperative efforts in foreign countries to remove excess and unwanted sealed sources by discussing three topical areas: (1) The Regional Partnership with the International Atomic Energy Agency; (2) Challenges in repatriating sealed sources; and (3) Options for repatriating sealed sources.

Abeyta, Cristy L [Los Alamos National Laboratory; Matzke, James L [Los Alamos National Laboratory; Zarling, John [Los Alamos National Laboratory; Tompkin, J. Andrew [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

300

Microsoft Word - figure_03.doc  

U.S. Energy Information Administration (EIA) Indexed Site

Survey of Domestic Oil and Gas Reserves"; LCI; Ventyx; and the Bureau of Safety and Environmental Enforcement, and predecessor agencies. IN OH TN WV VA KY MD PA NY VT NH MA CT ME...

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Figure 4. World Oil Prices  

U.S. Energy Information Administration (EIA) Indexed Site

4. World Oil Prices" " (2007 dollars per barrel)" ,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024,2025,2026,2027,2028,2029,2030...

302

Figure 2 Collect 5 horizontally  

E-Print Network [OSTI]

storage containers, (e.g., resealable plastic containers) 5% bleach solution Aluminum foil Newspaper, Butcher or Kraft paper Rigid shipping container, (e.g., cardboard box, etc.) Frozen ice packs Packing tape

Mukhtar, Saqib

303

114 Figure 2-16  

E-Print Network [OSTI]

triangular ripples in unconsolidated pteropod shells. These form parallel to the direction of the current31.7'W. Field of view 5 x 7 meters. Shoestring rills forming in unconsolidated sediments at the head

Kidd, William S. F.

304

Cancer Facts & Figures - 2010  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNationalRestart of the Review of theOFFICEACME | NationalTbilisi08 to17 2.7 i R yAL

305

Microsoft Word - Figure_01.doc  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0,InformationU.S. Crude Oil Production Outlook 1April95

306

Microsoft Word - Figure_02.doc  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0,InformationU.S. Crude Oil Production Outlook 1April956

307

Microsoft Word - Figure_05.doc  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0,InformationU.S. Crude Oil Production Outlook 1April956

308

Microsoft Word - Figure_06.doc  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0,InformationU.S. Crude Oil Production Outlook 1April95688

309

Microsoft Word - Figure_01.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet) YearNortheastern 3

310

Microsoft Word - Figure_05.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet) YearNortheastern 314

311

Microsoft Word - figure_04.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 2010 118511 0

312

Microsoft Word - figure_16.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042

313

Microsoft Word - figure_17.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 2010423

314

Microsoft Word - figure_18.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 20104236 10.9

315

Microsoft Word - figure_19.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 20104236

316

Microsoft Word - figure_20.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042364 0 2

317

Microsoft Word - figure_21.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042364 0

318

Microsoft Word - figure_22.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042364 08

319

Microsoft Word - figure_23.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042364 08

320

Microsoft Word - figure_24.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042364 080

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Microsoft Word - figure_25.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042364 080

322

Microsoft Word - figure_99.doc  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per Thousand Cubic Feet)December 201042364

323

Figure 1. Nonhydroelectric renewable generation  

U.S. Energy Information Administration (EIA) Indexed Site

1. Nonhydroelectric renewable generation" " (billion kilowatthours)" ,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024,2025,2026,2027,2028,...

324

Supplementary Figure 1 Analysis Modalities  

E-Print Network [OSTI]

of the dataset being analyzed is depicted by the dark color. Global Analysis. The entire dataset is analyzed wide user base. First, users can access the web application from our own web servers, which are running.IOBIO uses the MIT License. Implementation Details BAM.IOBIO is a Javascript and HTML web application using

Cai, Long

325

Figure2b.eps  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityField Office Programs forDecember 5Information

326

Microsoft Word - figure_03.doc  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValuesEIA-782A and EIA-782B:0 U.S. Energy

327

Dairy Biomass as a Renewable Fuel Source  

E-Print Network [OSTI]

biomass. This publication explains the properties of dairy manure that could make it an excellent source of fuel....

Mukhtar, Saqib; Goodrich, Barry; Engler, Cady; Capareda, Sergio

2008-03-19T23:59:59.000Z

328

The Political Economy of Open Source Software  

E-Print Network [OSTI]

Accidental Revolutionary. Sebastopol: O'Reilly Publishing,Open Source Revolution. Sebastopol: O'Reilly, 1999. p. 54).

Weber, Steven

2000-01-01T23:59:59.000Z

329

North Village Ground Source Heat Pumps  

Broader source: Energy.gov [DOE]

Overview: Installation of Ground Source Heat Pumps. Replacement of Aging Heat Pumps. Alignment with Furmanźs Sustainability Goals.

330

Seismic and infrasonic source processes in volcanic fluid systems  

E-Print Network [OSTI]

the crater. Figure 4.4b is a FLIR infrared image of the 16-is estimated at 300-400 m. (b) FLIR infrared image of 16-17

Matoza, Robin S.

2009-01-01T23:59:59.000Z

331

U.S. Energy Information Administration (EIA) - Source  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

loosely, the two do not track directly (Figure 87). The large difference between crude oil and natural gas prices results in a shift in drilling toward shale formations with...

332

Quarrying Evidence at the Quispisisa Obsidian Source, Ayacucho, Peru  

E-Print Network [OSTI]

Inter- action in Peru and BoliviaóLBL6343. Lawrence Berke-Peru and Northern Bolivia. Journal of World Prehistory 14(with Quispisisa Obsidian O BOLIVIA Km CHILE Figure 1. Map

Tripcevich, Nicholas; Contreras, Daniel A.

2011-01-01T23:59:59.000Z

333

Comparison of Aermod and ISCST3 Models for Particulate Emissions from Ground Level Sources  

E-Print Network [OSTI]

......................................................................................................................... 95 x LIST OF FIGURES Page Figure 1. Schematic of the Flocchini box model.............................................................. 7 Figure 2. Layout of test plots... in Table 1. EFs developed using the two modeling methods were found not to be statistically different for all the four species at the 95% confidence level. No difference was observed even in the standard deviation values of the EFs developed using...

Botlaguduru, Venkata Sai V.

2010-07-14T23:59:59.000Z

334

Josephson device with a matched rf source  

SciTech Connect (OSTI)

Analog simulation of a resistance-shunted ac Josephson junction coupled to an rf source with matching impedance reveals (1) added structure in the device's V-I curve even when the source is quiescent and (2) rf-induced steps with peak amplitudes between those produced by voltage and current rf sources. Both results are consistent with experimental data.

Longacre, A. Jr.

1980-03-01T23:59:59.000Z

335

Memorandum, Reporting of Radiological Sealed Sources Transactions  

Broader source: Energy.gov [DOE]

The requirements for reporting transactions involving radiological sealed sources are identified in Department of Energy (DOE) Notice (N) 234.1, Reporting of Radioactive Sealed Sources. The data reported in accordance with DOE N 234.1 are maintained in the DOE Radiological Source Registry and Tracking (RSRT) database by the Office of Information Management, within the Office of Environment, Health, Safety and Security.

336

Spallation Neutron Sources Around the World  

E-Print Network [OSTI]

Spallation Neutron Sources Around the World Bernie Riemer Thanks to others for the many shamelessly Laboratory #12;2 Managed by UT-Battelle for the U.S. Department of Energy Spallation Neutron Source Facilities Spallation Neutron Source Facilities Serve Neutron Science Programs · Neutron beams to suites

McDonald, Kirk

337

Assistant Deputy Executive Officer Mobile Source Division  

E-Print Network [OSTI]

sources, including all refineries and power plants Top NOx Emissions Sources in 2023 #12;Locomotive Light Duty Trucks/SUVs NOx(tons/day) * Oceangoing vessels = 32tons/day **RECLAIM: 320 largest stationary - Manufacturers may elect to meet a combined NOx+HC standard of 1.4 g/bhp-hr. Source: http://www.dieselnet.com/standards/us

California at Davis, University of

338

Conventional power sources for colliders  

SciTech Connect (OSTI)

At SLAC we are developing high peak-power klystrons to explore the limits of use of conventional power sources in future linear colliders. In an experimental tube we have achieved 150 MW at 1 ..mu..sec pulse width at 2856 MHz. In production tubes for SLAC Linear Collider (SLC) we routinely achieve 67 MW at 3.5 ..mu..sec pulse width and 180 pps. Over 200 of the klystrons are in routine operation in SLC. An experimental klystron at 8.568 GHz is presently under construction with a design objective of 30 MW at 1 ..mu..sec. A program is starting on the relativistic klystron whose performance will be analyzed in the exploration of the limits of klystrons at very short pulse widths.

Allen, M.A.

1987-07-01T23:59:59.000Z

339

Solenoid and monocusp ion source  

DOE Patents [OSTI]

An ion source which generates hydrogen ions having high atomic purity incorporates a solenoidal permanent magnets to increase the electron path length. In a sealed envelope, electrons emitted from a cathode traverse the magnetic field lines of a solenoid and a monocusp magnet between the cathode and a reflector at the monocusp. As electrons collide with gas, the molecular gas forms a plasma. An anode grazes the outer boundary of the plasma. Molecular ions and high energy electrons remain substantially on the cathode side of the cusp, but as the ions and electrons are scattered to the aperture side of the cusp, additional collisions create atomic ions. The increased electron path length allows for smaller diameters and lower operating pressures. 6 figs.

Brainard, J.P.; Burns, E.J.T.; Draper, C.H.

1997-10-07T23:59:59.000Z

340

Source Revue Archologique Sign par Franoise DUMASY -Universit Paris I  

E-Print Network [OSTI]

situation à l'écart de lieux connus. Ajoutons d'ailleurs qu'il aurait été très utile de reporter dans les titres des articles les numéros des sites tels qu'ils figurent dans l'inventaire, car le lecteur met remarquable travail de coordination fait pour les textes aurait-il pu s'étendre également aux figures qui

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Unclassified Source Term and Radionuclide Data for Corrective Action Unit 98: Frenchman Flat Nevada Test Site, Nevada, Rev. No.: 0  

SciTech Connect (OSTI)

Frenchman Flat is one of several areas of the Nevada Test Site (NTS) used for underground nuclear testing (Figure 1-1). These nuclear tests resulted in groundwater contamination in the vicinity of the underground test areas. As a result, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is currently conducting a corrective action investigation (CAI) of the Frenchman Flat underground test areas. Since 1996, the Nevada Division of Environmental Protection (NDEP) has regulated NNSA/NSO corrective actions through the ''Federal Facility Agreement and Consent Order'' ([FFACO], 1996). Appendix VI of the FFACO agreement, ''Corrective Action Strategy'', was revised on December 7, 2000, and describes the processes that will be used to complete corrective actions, including those in the Underground Test Area (UGTA) Project. The individual locations covered by the agreement are known as corrective action sites (CASs), which are grouped into corrective action units (CAUs). The UGTA CASs are grouped geographically into five CAUs: Frenchman Flat, Central Pahute Mesa, Western Pahute Mesa, Yucca Flat/Climax Mine, and Rainier Mesa/Shoshone Mountain (Figure 1-1). These CAUs have distinctly different contaminant source, geologic, and hydrogeologic characteristics related to their location (FFACO, 1996). The Frenchman Flat CAU consists of 10 CASs located in the northern part of Area 5 and the southern part of Area 11 (Figure 1-1). This report documents the evaluation of the information and data available on the unclassified source term and radionuclide contamination for Frenchman Flat, CAU 98. The methodology used to estimate hydrologic source terms (HSTs) for the Frenchman Flat CAU is also documented. The HST of an underground nuclear test is the portion of the total inventory of radionuclides that is released over time into the groundwater following the test. The total residual inventory of radionuclides associated with one or more tests is known as the radiologic source term (RST). The RST is comprised of radionuclides in water, glass, or other phases or mineralogic forms. This evaluation was conducted in support of the development of a CAU contaminant transport model for the Frenchman Flat CAU.

Farnham, Irene

2005-09-01T23:59:59.000Z

342

Source depth for solar p-modes  

E-Print Network [OSTI]

Theoretically calculated power spectra are compares with observed solar p-mode velocity power spectra over a range of mode degree and frequency. The depth for the sources responsible for exciting p-modes of frequency 2.0 mHz is determined from the asymmetry of their power spectra and found to be about 800 km below the photosphere for quadrupole sources and 150 km if sources are dipole. The source depth for high frequency oscillations of frequency greater than about 6 mHz is 180 (50) km for quadrupole (dipole) sources.

Pawan Kumar; Sarbani Basu

2000-06-15T23:59:59.000Z

343

International workshop on cold neutron sources  

SciTech Connect (OSTI)

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

Russell, G.J.; West, C.D. (comps.) (Los Alamos National Lab., NM (United States)) [comps.; Los Alamos National Lab., NM (United States)

1991-08-01T23:59:59.000Z

344

Fluids Mechanics -1 Consider a circular plate of outer radius Ro (a portion of which is shown in the figure). A fluid filled gap of thickness h(t)  

E-Print Network [OSTI]

Fluids Mechanics - 1 Consider a circular plate of outer radius Ro (a portion of which is shown in the figure). A fluid filled gap of thickness h(t) exists between the bottom of the plate and the flat surface that the fluid filling the gap is incompressible, inviscid and its motion is irrotational. Also assume the radial

Virginia Tech

345

2001 Geological Society of America. For permission to copy, contact Copyright Clearance Center at www.copyright.com or (978) 750-8400. Geology; October 2001; v. 29; no. 10; p. 919922; 4 figures. 919  

E-Print Network [OSTI]

transport processes in geology (e.g., accumulation of melt, oil, and gas). Keywords: fluids, magma2001 Geological Society of America. For permission to copy, contact Copyright Clearance Center at www.copyright.com or (978) 750-8400. Geology; October 2001; v. 29; no. 10; p. 919≠922; 4 figures. 919

van Milligen, Boudewijn

346

Figure S1. Growth of the wild-type and agr mutant over time. This includes the 48 h data point shown in Fig. 1a. We grew the wild-type() and agr mutant() in  

E-Print Network [OSTI]

Figure S1. Growth of the wild-type and agr mutant over time. This includes the 48 h data point shown in Fig. 1a. We grew the wild-type() and agr mutant() in waxmoths for 48 h, in single and mixed infections. When grown as monocultures in hosts, the QS wild-type grew to higher densities than the agr

West, Stuart

347

Do you know where your money goes each month? The following will help to figure your monthly spending. 1. List all the money you owe credit cards, loans, money you borrowed from family and friends, collection ac-  

E-Print Network [OSTI]

Do you know where your money goes each month? The following will help to figure your monthly spending. 1. List all the money you owe ­ credit cards, loans, money you borrowed from family and friends be less than or equal to income (Lesson 6). The first chart is for money you owe. The second is for income

Liskiewicz, Maciej

348

Source-to-Source Architecture Transformation for Performance Optimization in BIP  

E-Print Network [OSTI]

Source-to-Source Architecture Transformation for Performance Optimization in BIP Marius Bozga of composition operators: inter- actions and priorities. In this paper we present a method that transforms of the interconnection of components [14]. Source-to-source transformations have been considered as a powerful means

Paris-Sud XI, Universitť de

349

Blind source separation in the presence of weak sources J.-P. Nadala  

E-Print Network [OSTI]

Blind source separation in the presence of weak sources J.-P. Nadala , E. Korutchevab,*, F. Airesa" as compared to the other ones, the "weak" sources. We find that it is preferable to perform blind source simulations. 2000 Elsevier Science Ltd. All rights reserved. Keywords: Independent component analysis; Blind

Aires, Filipe

350

Blind Source Separation 2 Understanding Two Simultaneous Speeches by Blind Source Separation  

E-Print Network [OSTI]

Blind Source Separation 2 Understanding Two Simultaneous Speeches by Blind Source Separation) to segregate speech streams from a mixture of sounds, while the other ex- ploits Blind Source Separation the performance of Blind Source Separation by using the same three benchmarks of 500 mix- ture of two speeches

Ikeda, Shiro

351

Hard-bottom macrofauna of the East Flower Garden brine seep: impact of a long term, point-source brine discharge  

E-Print Network [OSTI]

canyon transect were sta- tions R6 and R7, both of which were on top of Cottonwick Rock, ap- proximately 2 m above the canyon floor. Figure 5 (p. 12) shows that salinity and sulfide at these stations were at normal marine levels. Though the total...HARD-BOT1'OM MACROFAUNA OF THE EAST FLOWER GARDEN BRINE SEEP: IMPACT OF A LONG TERM, POINT-SOURCE BRINE DISCHARGE A Thesis by STEPHEN REED GITTINGS Submitted to the Graduate College of Texas A&M University in partial fulfillment...

Gittings, Stephen Reed

1983-01-01T23:59:59.000Z

352

Biological Journal of the Linnean Society, 2004, 81, 3948. With 2 figures 2004 The Linnean Society of London, Biological Journal of the Linnean Society, 2004, 81, 3948 39  

E-Print Network [OSTI]

the obligatory behaviour of cultivating fungi as an essential food source. Of this complex and well foundresses of most species use an inert platform (discarded forewings, roots, or rocks) on which), with the collaboration of two or more queens (ple- ometrosis), with the help of workers, or by fission of a mature colony

Bermingham, Eldredge

353

Spent Sealed Sources Management in Switzerland - 12011  

SciTech Connect (OSTI)

Information is provided about the international recommendations for the safe management of disused and spent sealed radioactive sources wherein the return to the supplier or manufacturer is encouraged for large radioactive sources. The legal situation in Switzerland is described mentioning the demand of minimization of radioactive waste as well as the situation with respect to the interim storage facility at the Paul Scherrer Institute (PSI). Based on this information and on the market situation with a shortage of some medical radionuclides the management of spent sealed sources is provided. The sources are sorted according to their activity in relation to the nuclide-specific A2-value and either recycled as in the case of high active sources or conditioned as in the case for sources with lower activity. The results are presented as comparison between recycled and conditioned activity for three selected nuclides, i.e. Cs-137, Co-60 and Am-241. (author)

Beer, H.F. [Paul Scherrer Institute, CH-5232 Villigen (Switzerland)

2012-07-01T23:59:59.000Z

354

HTGR Mechanistic Source Terms White Paper  

SciTech Connect (OSTI)

The primary purposes of this white paper are: (1) to describe the proposed approach for developing event specific mechanistic source terms for HTGR design and licensing, (2) to describe the technology development programs required to validate the design methods used to predict these mechanistic source terms and (3) to obtain agreement from the NRC that, subject to appropriate validation through the technology development program, the approach for developing event specific mechanistic source terms is acceptable

Wayne Moe

2010-07-01T23:59:59.000Z

355

Carbothermic reduction with parallel heat sources  

DOE Patents [OSTI]

Disclosed are apparatus and method of carbothermic direct reduction for producing an aluminum alloy from a raw material mix including aluminum oxide, silicon oxide, and carbon wherein parallel heat sources are provided by a combustion heat source and by an electrical heat source at essentially the same position in the reactor, e.g., such as at the same horizontal level in the path of a gravity-fed moving bed in a vertical reactor. The present invention includes providing at least 79% of the heat energy required in the process by the electrical heat source.

Troup, Robert L. (Murrysville, PA); Stevenson, David T. (Washington Township, Washington County, PA)

1984-12-04T23:59:59.000Z

356

DOE & Strategic Sourcing "New Challenges, New Opportunities"  

Broader source: Energy.gov (indexed) [DOE]

& Strategic Sourcing "New Challenges, New Opportunities" What is it? NNSA Model DOE Future Activities Bill Marks, Commodity Manager, NNSA Supply Chain Management Center Gary...

357

Sources: Energy Information Administration, Form EIA-182,  

U.S. Energy Information Administration (EIA) Indexed Site

Sources: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14,...

358

Building the World's Most Advanced Light Source  

SciTech Connect (OSTI)

View this time-lapse video showing construction of the National Synchrotron Light Source II at Brookhaven National Laboratory. Construction is shown from 2009-2012.

None

2012-08-03T23:59:59.000Z

359

Radiation Sources and Radioactive Materials (Connecticut)  

Broader source: Energy.gov [DOE]

These regulations apply to persons who receive, transfer, possess, manufacture, use, store, handle, transport or dispose of radioactive materials and/or sources of ionizing radiation. Some...

360

Engineered Quantum Dot Single Photon Sources  

E-Print Network [OSTI]

Fast, high efficiency, and low error single photon sources are required for implementation of a number of quantum information processing applications. The fastest triggered single photon sources to date have been demonstrated using epitaxially grown semiconductor quantum dots (QDs), which can be conveniently integrated with optical microcavities. Recent advances in QD technology, including demonstrations of high temperature and telecommunications wavelength single photon emission, have made QD single photon sources more practical. Here we discuss the applications of single photon sources and their various requirements, before reviewing the progress made on a quantum dot platform in meeting these requirements.

Sonia Buckley; Kelley Rivoire; Jelena Vuckovic

2012-10-03T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Photon Statistics of Semiconductor Light Sources.  

E-Print Network [OSTI]

??In recent years, semiconductor light sources have become more and more interesting in terms of applications due to their high efficiency and low cost. AdvancedÖ (more)

AŖmann, Marc

2010-01-01T23:59:59.000Z

362

Simulation of radiant cooling performance with evaporative cooling sources  

E-Print Network [OSTI]

energy sources of cooling supply water and an aggressiveas the primary source of cooling supply water. The analysisthermal mass to the cooling supply water source, nighttime

Moore, Timothy

2008-01-01T23:59:59.000Z

363

COLLABORATIVE RESEARCH: Study of Aerosol Sources and Processing at the GVAX Pantnagar Supersite  

SciTech Connect (OSTI)

This project funded the participation of scientists from seven research groups, running more than thirty instruments, in the Winter Intensive Operating Period (January-February 2012) of the Clean Air for London (ClearfLo) campaign at a rural site in Detling, UK, 45 km southeast of central London. The primary science questions for the ClearfLo Winter IOP were, 1) what is the urban increment of particulate matter (PM) and other pollutants in the greater London area, and, 2) what is the contribution of solid fuel use for home heating to wintertime PM? An additional motivation for the Detling measurements was the question of whether coatings on black carbon particles enhance absorption. The following four key accomplishments have been identified so far: 1) Chemical, physical and optical characterization of PM from local and regional sources (Figures 2, 4, 5 and 6). 2) Measurement of urban increment in particulate matter and gases in London (Figure 3). 3) Measurement of optical properties and chemical composition of coatings on black carbon containing particles indicates absorption enhancement. 4) First deployment of chemical ionization instrument (MOVI-CI-TOFMS) to measure both particle-phase and gas-phase organic acids. (See final report from Joel Thornton, University of Washington, for details.) Analysis of the large dataset acquired in Detling is ongoing and will yield further key accomplishments. These measurements of urban and rural aerosol properties will contribute to improved modeling of regional aerosol emissions, and of atmospheric aging and removal. The measurement of absorption enhancement by coatings on black carbon will contribute to improved modeling of the direct radiative properties of PM.

Worsnop, Douglas R. [Principal Investigator

2014-07-28T23:59:59.000Z

364

Seismic data obtained using. 50-caliber machine gun as high-resolution seismic source  

SciTech Connect (OSTI)

A seismic line across a shoestring sandstone served as a test of a .50-caliber machine gun as a high-resolution seismic source in exploring for shallow sandstones. The line crosses part of the Bronson-Xenia oil field, which produces from the Bartlesville sandstone of the Cherokee Group (Pennsylvanian) in Bourbon County, Kansas, at a depth of 622 ft (190 m). The reservoir, which has a flat base and an irregular top, may represent a superposition of fluvial sandstones. The seismic line clearly depicts a lenticular sandstone that is up to 56 ft (17 m) thick. Both the lateral extent of the sandstone body and a slight velocity pull-up of the underlying layers are evident. In addition to the target sandstone, two additional sandstone bodies may be present at the east end of the line, where well control is not available. Analysis of the seismic data indicates that the frequency of the .50-caliber sources is from 30 to 170 Hz. The high frequencies are retained deep into the section. Two shots per shotpoint are the minimum number necessary for acquiring high-quality data, and 12-fold is the minimum acceptable common-depth-point (CDP) coverage. 11 figures.

Seeber, M.D.; Steeples, D.

1986-08-01T23:59:59.000Z

365

Organic geochemistry and source rock characteristics of the Zagros Petroleum Province, southwest Iran  

SciTech Connect (OSTI)

The Zagros sector of SW Iran and its continuation into N Iraq forms the tectonized NE margin of the Middle East basin. Sedimentation in the Zagros began in the late Precambrian and continued with comparatively few interruptions until the Pliocene, when strong earth movements affected the area and gave rise to the present day large, elongated NW-SE trending structures. Some of the world's largest structurally-controlled oil fields are located in the Zagros. The most productive pay zone is the Oligo-Miocene Asmari Formation, although significant oil pools are present also in the Cenomanian-Turonian Sarvak limestone and in the Neocomian-Jurassic Khami Group carbonates. Recently, large gas deposits have been discovered in the Permo-Triassic carbonates assigned to the Deh Ram Group. Geochemical studies were carried out in five potential source beds of Eocene-Palaeocene (Pabdeh Formation), Maestrichtian-Campanian (Gurpi Formation), Albian (Kazhdumi Formation), Coniacian-Neocomian (Garau Formation) and Silurian (Gahkum Formation) age. The results showed that the organic matter in these formations is almost exclusively of marine algal origin, and that the Kazhdumi is the major source of the hydrocarbons in the Asmari and Sarvak reservoirs. The origin of the hydrocarbons in the Khami and Deh Ram reservoirs is at present speculative. 19 figures, 1 table.

Ala, M.A.; Kinghorn, R.R.F.; Rahman, M.

1980-07-01T23:59:59.000Z

366

Power conditioning system for energy sources  

DOE Patents [OSTI]

Apparatus for conditioning power generated by an energy source includes an inverter for converting a DC input voltage from the energy source to a square wave AC output voltage, and a converter for converting the AC output voltage from the inverter to a sine wave AC output voltage.

Mazumder, Sudip K. (Chicago, IL); Burra, Rajni K. (Chicago, IL); Acharya, Kaustuva (Chicago, IL)

2008-05-13T23:59:59.000Z

367

Negative hydrogen ion sources for accelerators  

SciTech Connect (OSTI)

A variety of H{sup -} ion sources are in use at accelerator laboratories around the world. A list of these ion sources includes surface plasma sources with magnetron, Penning and surface converter geometries as well as magnetic-multipole volume sources with and without cesium. Just as varied is the means of igniting and maintaining magnetically confined plasmas. Hot and cold cathodes, radio frequency, and microwave power are all in use, as well as electron tandem source ignition. The extraction systems of accelerator H{sup -} ion sources are highly specialized utilizing magnetic and electric fields in their low energy beam transport systems to produce direct current, as well as pulsed and/or chopped beams with a variety of time structures. Within this paper, specific ion sources utilized at accelerator laboratories shall be reviewed along with the physics of surface and volume H{sup -} production in regard to source emittance. Current research trends including aperture modeling, thermal modeling, surface conditioning, and laser diagnostics will also be discussed.

Moehs, D.P.; /Fermilab; Peters, J.; /DESY; Sherman, J.; /Los Alamos

2005-08-01T23:59:59.000Z

368

Beam current controller for laser ion source  

DOE Patents [OSTI]

The present invention relates to the design and use of an ion source with a rapid beam current controller for experimental and medicinal purposes. More particularly, the present invention relates to the design and use of a laser ion source with a magnetic field applied to confine a plasma flux caused by laser ablation.

Okamura, Masahiro

2014-10-28T23:59:59.000Z

369

NEWS & VIEWS Radiation SouRCES  

E-Print Network [OSTI]

NEWS & VIEWS Radiation SouRCES Electrons and lasers sing THz tune gwyn P. Williams is in the Free Bielawski and colleagues describe the ability to coherently control the radiative behaviour of the electrons a bright, tunable source of radiation in the difficult-to-reach terahertz region of the electromagnetic

Loss, Daniel

370

Business Partnering with Open Source Communities  

E-Print Network [OSTI]

Business Partnering with Open Source Communities: Opportunities, Perils and Pitfalls James Howison Syracuse University #12;James Howison: Open Source and Business Partnering Introductions ·Doctoral student researching FLOSS ·Online but also ApacheCon, O'Reilly OSCon, ODSC ·Developer on BibDesk, (small OS X

Crowston, Kevin

371

Multi-Sourced Electricity for Electrolytic Hydrogen  

E-Print Network [OSTI]

$/tonne (the DOE's centralized plant #12;Page 8 Electrolytic Hydrogen · Focus on low-cost electrolysis - 300 US Americas DOE Hydrogen Electrolysis-Utility Integration Workshop Boulder, Colorado 2004 September 22 & 23Multi-Sourced Electricity for Electrolytic Hydrogen Multi-Sourced Electricity for Electrolytic

372

Portable thermo-photovoltaic power source  

DOE Patents [OSTI]

A miniature thermo-photovoltaic (TPV) device for generation of electrical power for use in portable electronic devices. A TPV power source is constructed to provide a heat source chemical reactor capable of using various fuels, such as liquid hydrocarbons, including but not limited to propane, LPG, butane, alcohols, oils and diesel fuels to generate a source of photons. A reflector dish guides misdirected photon energy from the photon source toward a photovoltaic array. A thin transparent protector sheet is disposed between the photon source and the array to reflect back thermal energy that cannot be converted to electricity, and protect the array from thermal damage. A microlens disposed between the protector sheet and the array further focuses the tailored band of photon energy from the photon source onto an array of photovoltaic cells, whereby the photon energy is converted to electrical power. A heat recuperator removes thermal energy from reactor chamber exhaust gases, preferably using mini- or micro-bellows to force air and fuel past the exhaust gases, and uses the energy to preheat the fuel and oxidant before it reaches the reactor, increasing system efficiency. Mini- or micro-bellows force ambient air through the system both to supply oxidant and to provide cooling. Finally, an insulator, which is preferably a super insulator, is disposed around the TPV power source to reduce fuel consumption, and to keep the TPV power source cool to the touch so it can be used in hand-held devices.

Zuppero, Anthony C. (Idaho Falls, ID); Krawetz, Barton (Idaho Falls, ID); Barklund, C. Rodger (Idaho Falls, ID); Seifert, Gary D. (Idaho Falls, ID)

1997-01-14T23:59:59.000Z

373

Management of disused plutonium sealed sources  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Offsite Source Recovery Project (OSRP) has been recovering excess and unwanted radioactive sealed sources since 1999, including more than 2,400 Plutonium (Pu)-238 sealed sources and 653 Pu-239-bearing sources that represent more than 10% of the total sources recovered by GTRI/OSRP to date. These sources have been recovered from hundreds of sites within the United States (US) and around the world. OSRP grew out of early efforts at the Los Alamos National Laboratory (LANL) to recover and disposition excess Plutonium-239 (Pu-239) sealed sources that were distributed in the 1960s and 1970s under the Atoms for Peace Program, a loan-lease program that serviced 31 countries, as well as domestic users. In the conduct of these recovery operations, GTRI/OSRP has been required to solve problems related to knowledge-of-inventory, packaging and transportation of fissile and heat-source materials, transfer of ownership, storage of special nuclear material (SNM) both at US Department of Energy (DOE) facilities and commercially, and disposal. Unique issues associated with repatriation from foreign countries, including end user agreements required by some European countries and denials of shipment, will also be discussed.

Whitworth, Julia Rose [Los Alamos National Laboratory; Pearson, Michael W [Los Alamos National Laboratory; Abeyta, Cristy [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

374

SHIELDING ANALYSIS FOR PORTABLE GAUGING COMBINATION SOURCES  

SciTech Connect (OSTI)

Radioisotopic decay has been used as a source of photons and neutrons for industrial gauging operations since the late 1950s. Early portable moisture/density gauging equipment used Americium (Am)-241/Beryllium (Be)/Cesium (Cs)-137 combination sources to supply the required nuclear energy for gauging. Combination sources typically contained 0.040 Ci of Am-241 and 0.010 Ci of CS-137 in the same source capsule. Most of these sources were manufactured approximately 30 years ago. Collection, transportation, and storage of these sources once removed from their original device represent a shielding problem with distinct gamma and neutron components. The Off-Site Source Recovery (OSR) Project is planning to use a multi-function drum (MFD) for the collection, shipping, and storage of AmBe sources, as well as the eventual waste package for disposal. The MFD is an approved TRU waste container design for DOE TRU waste known as the 12 inch Pipe Component Overpack. As the name indicates, this drum is based on a 12 inch ID stainless steel weldment approximately 25 inch in internal length. The existing drum design allows for addition of shielding within the pipe component up to the 110 kg maximum pay load weight. The 12 inch pipe component is packaged inside a 55-gallon drum, with the balance of the interior space filled with fiberboard dunnage. This packaging geometry is similar to the design of a DOT 6M, Type B shipping container.

J. TOMPKINS; L. LEONARD; ET AL

2000-08-01T23:59:59.000Z

375

Fermi Large Area Telescope Third Source Catalog  

E-Print Network [OSTI]

We present the third Fermi Large Area Telescope source catalog (3FGL) of sources in the 100~MeV--300~GeV range. Based on the first four years of science data from the Fermi Gamma-ray Space Telescope mission, it is the deepest yet in this energy range. Relative to the 2FGL catalog, the 3FGL catalog incorporates twice as much data as well as a number of analysis improvements, including improved calibrations at the event reconstruction level, an updated model for Galactic diffuse gamma-ray emission, a refined procedure for source detection, and improved methods for associating LAT sources with potential counterparts at other wavelengths. The 3FGL catalog includes 3033 sources above 4 sigma significance, with source location regions, spectral properties, and monthly light curves for each. Of these, 78 are flagged as potentially being due to imperfections in the model for Galactic diffuse emission. Twenty-five sources are modeled explicitly as spatially extended, and overall 232 sources are considered as identifie...

,

2015-01-01T23:59:59.000Z

376

BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION  

E-Print Network [OSTI]

OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION FINAL Prepared by: Brookhaven FOR U.S. Department of Energy March 2009 #12;i OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA..................................................................................................................4 4.0 Building 96 ­ Operational Background

377

Surface figure and roughness tolerances for NIF optics and the interpretation of the gradient, P-V wavefront and RMS specifications  

SciTech Connect (OSTI)

In a high energy laser system such as the National Ignition Facility (NIF), the ability to focus light into as small a spot as possible at the highest possible fluence is highly dependent on the quality of the optics used in the system. Typically, surface form errors and transmitted and reflected wavefront errors are specified in terms of a peak-to-valley wavefront error (P-V), or occasionally in terms of an RMS wavefront error (RMS) 1 . It has been shown, however, that the parameter that most closely correlates with beam focusability is neither of these, but the RMS of the gradients of the wavefront error (RMS Gradient). Further, the spatial frequency of the wavefront error plays a significant role in the way that a given error effects the performance of the laser system, so careful attention must be paid to how the spatial filtering is both specified and accomplished. Since ISO 10110 has no specific provisions for a gradient specification, LLNL has developed its own notation and procedures for these critical specifications. In evaluating surface figure errors as specified by the NIF drawings, modern phase modulating interferometers (PMI) will be used. In addition to performing QA testing of the optics, LLNL intends to utilize the software capabilities of the instruments to obtain the information to model the wavefront of the 131 passes through various optical elements comprising the NIF front end. Tests will be performed and documented after coating and as installed in the specified mechanical mounts. This paper describes the evaluation of the wavefront error for NIF small optics including specifications over a given spatial period callout, the proper low pass filtering of the data and the allowable filtering and settings that can be applied to obtain proper wavefront data. This paper also describes the origin and evolution of other NIF wavefront and roughness specifications, and gives examples. Since the wavefront requirements and hence the specifications vary for the different systems in the NIF, we will focus on one system, the injection laser system (ILS) or ''front end''. Also discussed will be the metrology and data manipulation requirements for the large aperture optics. Finally, clarification will be given to the differences between various versions of the RMS wavefront and roughness specifications allowed in ISO 10110, and how they contrast to the RMS roughness specifications used in ANSI-Y14.5.

Aikens, D M; English, R E; House, W; Lawson, J K; Nichols, M A; Whistler, W T

1999-07-01T23:59:59.000Z

378

Comparing and Contrasting Web Services and Open Source  

E-Print Network [OSTI]

Software can either be developed in a way such that the source code is available to others, open source, or such that it is not, closed source. Open source software has a number of architectural advantages over traditionally ...

Katz, Jeremy Lee

2010-01-01T23:59:59.000Z

379

Electrospray ion source with reduced analyte electrochemistry  

DOE Patents [OSTI]

An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

Kertesz, Vilmos; Van Berkel, Gary J

2013-07-30T23:59:59.000Z

380

Calculation of source terms for NUREG-1150  

SciTech Connect (OSTI)

The source terms estimated for NUREG-1150 are generally based on the Source Term Code Package (STCP), but the actual source term calculations used in computing risk are performed by much smaller codes which are specific to each plant. This was done because the method of estimating the uncertainty in risk for NUREG-1150 requires hundreds of source term calculations for each accident sequence. This is clearly impossible with a large, detailed code like the STCP. The small plant-specific codes are based on simple algorithms and utilize adjustable parameters. The values of the parameters appearing in these codes are derived from the available STCP results. To determine the uncertainty in the estimation of the source terms, these parameters were varied as specified by an expert review group. This method was used to account for the uncertainties in the STCP results and the uncertainties in phenomena not considered by the STCP.

Breeding, R.J.; Williams, D.C.; Murfin, W.B.; Amos, C.N.; Helton, J.C.

1987-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Apparatus for safeguarding a radiological source  

DOE Patents [OSTI]

A tamper detector is provided for safeguarding a radiological source that is moved into and out of a storage location through an access porthole for storage and use. The radiological source is presumed to have an associated shipping container approved by the U.S. Nuclear Regulatory Commission for transporting the radiological source. The tamper detector typically includes a network of sealed tubing that spans at least a portion of the access porthole. There is an opening in the network of sealed tubing that is large enough for passage therethrough of the radiological source and small enough to prevent passage therethrough of the associated shipping cask. Generally a gas source connector is provided for establishing a gas pressure in the network of sealed tubing, and a pressure drop sensor is provided for detecting a drop in the gas pressure below a preset value.

Bzorgi, Fariborz M

2014-10-07T23:59:59.000Z

382

Electrospray ion source with reduced analyte electrochemistry  

DOE Patents [OSTI]

An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

Kertesz, Vilmos [Knoxville, TN; Van Berkel, Gary [Clinton, TN

2011-08-23T23:59:59.000Z

383

OpenADR Open Source Toolkit: Developing Open Source Software for the Smart Grid  

E-Print Network [OSTI]

Status of NISTís EISA Smart Grid Efforts,Ē Mar. 26, 2009,Open Source Software for the Smart Grid Charles McParlandOpen Source Software for the Smart Grid Charles McParland,

McParland, Charles

2012-01-01T23:59:59.000Z

384

Supplemental Figure 1. Root lengths of S. pinnata and S. albescens grown on vertically placed agar plates after 30 days of growth from germination. Plants treated without () Se (open bars) and with (+) 20 M SeO4  

E-Print Network [OSTI]

) and with (+) 20 M SeO4 2- (gray bars). Data represent the average of 4-5 different plants Ī SE. P-values using and S. albescens grown with or without 20 M SeO4 2- . The only significant difference between treatments. pinnata when compared with S. albescens grown with and without 20 M SeO4 2- . #12;Supplemental Figure 4

385

Downloaded 07 Feb 2012 to 128.180.65.141. Redistribution subject to AIP license or copyright; see http://jap.aip.org/about/rights_and_permissions Characterizations of Seebeck coefficients and thermoelectric figures of merit  

E-Print Network [OSTI]

/(mK)] due to the increased alloy scattering, however, the optimized thermoelectric material was obtained for materials based on AlGaN34,35 and InGaN36,37 alloys. The thermoelectric properties for RF-sputtered Al and thermoelectric figures of merit for AlInN alloys with various In-contents Jing Zhang,a) Hua Tong, Guangyu Liu

Gilchrist, James F.

386

Source storage and transfer cask: Users Guide  

SciTech Connect (OSTI)

The storage and shield cask for the dual californium source is designed to shield and transport up to 3.7 mg (2 Ci) of /sup 252/Cf. the cask meets Department of Transportation (DOT) license requirements for Type A materials (DOT-7A). The cask is designed to transfer sources to and from the Flourinel and Fuel Storage (FAST) facility delayed-neutron interrogator. Californium sources placed in the cask must be encapsulated in the SR-CF-100 package and attached to Teleflex cables. The cask contains two source locations. Each location contains a gear box that allows a Teleflex cable to be remotely moved by a hand crank into and out of the cask. This transfer procedure permits sources to be easily removed and inserted into the delayed-neutron interrogator and reduces personnel radiation exposure during transfer. The radiation dose rate with the maximum allowable quantity of californium (3.7 mg) in the cask is 30 mR/h at the surface and less than 2 mR/h 1 m from the cask surface. This manual contains information about the cask, californium sources, describes the method to ship the cask, and how to insert and remove sources from the cask. 28 figs.

Eccleston, G.W.; Speir, L.G.; Garcia, D.C.

1985-04-01T23:59:59.000Z

387

Sources of the Radio Background Considered  

SciTech Connect (OSTI)

We investigate possible origins of the extragalactic radio background reported by the ARCADE 2 collaboration. The surface brightness of the background is several times higher than that which would result from currently observed radio sources. We consider contributions to the background from diffuse synchrotron emission from clusters and the intergalactic medium, previously unrecognized flux from low surface brightness regions of radio sources, and faint point sources below the flux limit of existing surveys. By examining radio source counts available in the literature, we conclude that most of the radio background is produced by radio point sources that dominate at sub {mu}Jy fluxes. We show that a truly diffuse background produced by elections far from galaxies is ruled out because such energetic electrons would overproduce the observed X-ray/{gamma}-ray background through inverse Compton scattering of the other photon fields. Unrecognized flux from low surface brightness regions of extended radio sources, or moderate flux sources missed entirely by radio source count surveys, cannot explain the bulk of the observed background, but may contribute as much as 10%. We consider both radio supernovae and radio quiet quasars as candidate sources for the background, and show that both fail to produce it at the observed level because of insufficient number of objects and total flux, although radio quiet quasars contribute at the level of at least a few percent. We conclude that the most important population for production of the background is likely ordinary starforming galaxies above redshift 1 characterized by an evolving radio far-infrared correlation, which increases toward the radio loud with redshift.

Singal, J.; /KIPAC, Menlo Park /Stanford U.; Stawarz, L.; /KIPAC, Menlo Park /Stanford U. /Jagiellonian U., Astron. Observ.; Lawrence, A.; /Edinburgh U., Inst. Astron. /KIPAC, Menlo Park /Stanford U.; Petrosian, V.; /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., Appl. Phys. Dept.

2011-08-22T23:59:59.000Z

388

Directional measurements for sources of fission neutrons  

SciTech Connect (OSTI)

Although penetrating neutron and gamma-ray emissions arguably provide the most effective signals for locating sources of nuclear radiation, their relatively low fluxes make searching for radioactive materials a tedious process. Even assuming lightly shielded sources and detectors with large areas and high efficiencies, estimated counting times can exceed several minutes for source separations greater than ten meters. Because determining the source position requires measurements at several locations, each with its own background, the search procedure can be lengthy and difficult to automate. Although directional measurements can be helpful, conventional collimation reduces count rates and increases the detector size and weight prohibitively, especially for neutron instruments. We describe an alternative approach for locating radiation sources that is based on the concept of a polarized radiation field. In this model, the presence of a source adds a directional component to the randomly oriented background radiation. The net direction of the local field indicates the source angle, and the magnitude provides an estimate of the distance to the source. The search detector is therefore seen as a device that responds to this polarized radiation field. Our proposed instrument simply substitutes segmented detectors for conventional single-element ones, so it requires little or no collimating material or additional weight. Attenuation across the detector creates differences in the count rates for opposite segments, whose ratios can be used to calculate the orthogonal components of the polarization vector. Although this approach is applicable to different types of radiation and detectors, in this report we demonstrate its use for sources of fission neutrons by using a prototype fast-neutron detector, which also provides background-corrected energy spectra for the incident neutrons.

Byrd, R.C.; Auchampaugh, G.F.; Feldman, W.C.

1993-11-01T23:59:59.000Z

389

The M31 population of supersoft sources  

E-Print Network [OSTI]

The 1991 ROSAT PSPC M31 X-ray point source catalog has been screened in order to set up a sample of candidate supersoft sources in this galaxy, additional to the 16 supersoft sources of Supper et al. (1997). 26 candidates have been found. Absorbing hydrogen column densities, effective temperatures and white dwarf masses (assuming the sources are on the stability line of surface nuclear burning) are derived. An observed white dwarf mass distribution is derived which indicates that the masses are constrained to values above 0.90 solar masses. The entire population of supersoft sources in M31 is estimated taking a theoretical white dwarf mass distribution into account, assuming that the observationally derived sample is restricted to white dwarf masses above 0.90 solar, and taking into account that the gas and the source population have a different scale height. A total number of at least 200-500 and at most 6,000-15,000 sources is deduced depending on the used galaxy N_H model, making use of the population synthesis calculation of Yungelson (1996). The spatial distribution favors a disk (or spiral-arm) dominated young stellar population with a ratio of 1/(4-7) of bulge/disk systems. Assuming that all supersoft sources with masses in excess of 0.5 solar masses are progenitors of supernovae of type Ia, a SN Ia rate of (0.8-7) 10^-3 yr^-1 is derived for M31 based on these progenitors. Supersoft sources might account for 20-100% of the total SN Ia rate in a galaxy like M31.

Peter Kahabka

1999-01-12T23:59:59.000Z

390

Potassium sources and availability in three East Texas soils  

E-Print Network [OSTI]

Coefficient of determination values for selected parameters of Troup versus exchangeable po tas slum 63 16 Fstimated amount of mica potassium in s5um materials to a depth of 235cm 65 LIST OF FIGURES Figure Page Distribution of percent K 0 in Troup... with depth 34 Comparison of Na S 0 treated and untreated Troup 20-5um mater aI from 205-235cm depth 38 Distribution of Gapon selectivity coefficients in Troup with depth Distribution of Gapon selectivity coefficients in Boswell with depth 46 X...

Hons, F. M

2012-06-07T23:59:59.000Z

391

Romanian ECR ion source project RECRIS  

SciTech Connect (OSTI)

A 14.5 GHz ECR ion source is in an advanced stage of construction at the Institute of Atomic Physics of Bucharest, Romania. This ECR multicharge heavy ion source (RECRIS) is designed to be independently used in atomic physics research as well as an injector into the existing rf heavy ion postaccelerator of the Bucharest FN tandem accelerator. The general design and main characteristics of RECRIS are presented as well as the present status and the schedule of this project. A research program and facility was started in order to study physical ways to improve the ECR ion source performances. {copyright} {ital 1996 American Institute of Physics.}

Dobrescu, S.; Schaechter, L.; Badescu-Singureanu, A.I.; Zoran, V. [Institute of Physics and Nuclear Engineering, P. O. Box MG-6, Bucharest (Romania)] [Institute of Physics and Nuclear Engineering, P. O. Box MG-6, Bucharest (Romania)

1996-03-01T23:59:59.000Z

392

Spallation Neutron Source reaches megawatt power  

ScienceCinema (OSTI)

The Department of Energy's Spallation Neutron Source (SNS), already the world's most powerful facility for pulsed neutron scattering science, is now the first pulsed spallation neutron source to break the one-megawatt barrier. "Advances in the materials sciences are fundamental to the development of clean and sustainable energy technologies. In reaching this milestone of operating power, the Spallation Neutron Source is providing scientists with an unmatched resource for unlocking the secrets of materials at the molecular level," said Dr. William F. Brinkman, Director of DOE's Office of Science.

Dr. William F. Brinkman

2010-01-08T23:59:59.000Z

393

Mechanistic facility safety and source term analysis  

SciTech Connect (OSTI)

A PC-based computer program was created for facility safety and source term analysis at Hanford The program has been successfully applied to mechanistic prediction of source terms from chemical reactions in underground storage tanks, hydrogen combustion in double contained receiver tanks, and proccss evaluation including the potential for runaway reactions in spent nuclear fuel processing. Model features include user-defined facility room, flow path geometry, and heat conductors, user-defined non-ideal vapor and aerosol species, pressure- and density-driven gas flows, aerosol transport and deposition, and structure to accommodate facility-specific source terms. Example applications are presented here.

PLYS, M.G.

1999-06-09T23:59:59.000Z

394

Source Coding with Mismatched Distortion Measures  

E-Print Network [OSTI]

We consider the problem of lossy source coding with a mismatched distortion measure. That is, we investigate what distortion guarantees can be made with respect to distortion measure $\\tilde{\\rho}$, for a source code designed such that it achieves distortion less than $D$ with respect to distortion measure $\\rho$. We find a single-letter characterization of this mismatch distortion and study properties of this quantity. These results give insight into the robustness of lossy source coding with respect to modeling errors in the distortion measure. They also provide guidelines on how to choose a good tractable approximation of an intractable distortion measure.

Niesen, Urs; Wornell, Gregory

2008-01-01T23:59:59.000Z

395

The Identification of EGRET Sources with Flat-Spectrum Radio Sources  

E-Print Network [OSTI]

We present a method to assess the reliability of the identification of EGRET sources with extragalactic radio sources. We verify that EGRET is detecting the blazar class of AGN. However, many published identifications are found to be questionable. We provide a table of 42 blazars which we expect to be robust identifications of EGRET sources. This includes one previously unidentified EGRET source, the lensed AGN PKS 1830-210 near the direction of the Galactic center. We provide the best available positions for 16 more radio sources which are also potential identifications for previously unidentified EGRET sources. All high Galactic latitude EGRET sources (b>3 degrees) which demonstrate significant variability can be identified with flat spectrum radio sources. This suggests that EGRET is not detecting any type of AGN other than blazars. This identification method has been used to establish with 99.998% confidence that the peak gamma-ray flux of a blazar is correlated with its average 5 GHz radio flux. An even better correlation is seen between gamma-ray flux and the 2.29 GHz flux density measured with VLBI at the base of the radio jet. Also, using high confidence identifications, we find that the radio sources identified with EGRET sources have larger correlated VLBI flux densities than the parent population of flat radio spectrum sources.

J. R. Mattox; J. Schachter; L. Molnar; R. C. Hartman; A. R. Patnaik

1996-12-18T23:59:59.000Z

396

Anomaly metrics to differentiate threat sources from benign sources in primary vehicle screening.  

SciTech Connect (OSTI)

Discrimination of benign sources from threat sources at Port of Entries (POE) is of a great importance in efficient screening of cargo and vehicles using Radiation Portal Monitors (RPM). Currently RPM's ability to distinguish these radiological sources is seriously hampered by the energy resolution of the deployed RPMs. As naturally occurring radioactive materials (NORM) are ubiquitous in commerce, false alarms are problematic as they require additional resources in secondary inspection in addition to impacts on commerce. To increase the sensitivity of such detection systems without increasing false alarm rates, alarm metrics need to incorporate the ability to distinguish benign and threat sources. Principal component analysis (PCA) and clustering technique were implemented in the present study. Such techniques were investigated for their potential to lower false alarm rates and/or increase sensitivity to weaker threat sources without loss of specificity. Results of the investigation demonstrated improved sensitivity and specificity in discriminating benign sources from threat sources.

Cohen, Israel Dov; Mengesha, Wondwosen

2011-09-01T23:59:59.000Z

397

Enabling Exponential Innovation via Open Source  

E-Print Network [OSTI]

-technical innovations #12;Power law distribution #12;OSSD Projects as innovation engines Social/technical innovations OSSD projects exhibit sustained exponential growth via social and technical innovations ExponentialEnabling Exponential Innovation via Open Source Software Development Walt Scacchi Institute

Scacchi, Walt

398

Atmospheric sampling glow discharge ionization source  

DOE Patents [OSTI]

An atmospheric sampling glow discharge ionization source that can be used in combination with an analytical instrument which operates at high vacuum, such as a mass spectrometer. The atmospheric sampling glow discharge ionization source comprises a chamber with at least one pair of electrodes disposed therein, an inlet for a gaseous sample to be analyzed and an outlet communicating with an analyzer which operates at subatmospheric pressure. The ionization chamber is maintained at a pressure below atmospheric pressure, and a voltage difference is applied across the electrodes to induce a glow discharge between the electrodes, so that molecules passing through the inlet are ionized by the glow discharge and directed into the analyzer. The ionization source accepts the sample under atmospheric pressure conditions and processes it directly into the high vacuum instrument, bridging the pressure gap and drawing off unwanted atmospheric gases. The invention also includes a method for analyzing a gaseous sample using the glow discharge ionization source described above. 3 figs.

McLuckey, S.A.; Glish, G.L.

1989-07-18T23:59:59.000Z

399

Compact neutron source development at LBNL  

E-Print Network [OSTI]

Castro and Alan Smith from LBNLís Radiation Safety Group inthe LDRD Project of LBNL and the U. S. Department of Energyneutron source development at LBNL Jani Reijonen * , Tak Pui

Reijonen, Jani; Lou, Tak Pui; Tolmachoff, Bryan; Leung, K.N.

2001-01-01T23:59:59.000Z

400

National Synchrotron Light Source annual report 1988  

SciTech Connect (OSTI)

This report discusses the experiment done at the National Synchrotron Light Source. Most experiments discussed involves the use of the x-ray beams to study physical properties of solid materials. (LSP)

Hulbert, S.; Lazarz, N.; Williams, G. (eds.)

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Modelling of Radiative Transfer in Light Sources  

E-Print Network [OSTI]

of equations . . . . . . . . . . . . . . . . . 19 2.4 Transport equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 3.2 The equation for radiative transfer . . . . . . . . . . . . . . . . . . . . . . . . 44 3Modelling of Radiative Transfer in Light Sources PROEFSCHRIFT ter verkrijging van de graad van

Eindhoven, Technische Universiteit

402

Sample inlet tube for ion source  

DOE Patents [OSTI]

An improved inlet tube is positioned within an aperture through the device to allow the passage of ions from the ion source, through the improved inlet tube, and into the interior of the device. The inlet tube is designed with a larger end and a smaller end wherein the larger end has a larger interior diameter than the interior diameter of the smaller end. The inlet tube is positioned within the aperture such that the larger end is pointed towards the ion source, to receive ions therefrom, and the smaller end is directed towards the interior of the device, to deliver the ions thereto. Preferably, the ion source utilized in the operation of the present invention is a standard electrospray ionization source. Similarly, the present invention finds particular utility in conjunction with analytical devices such as mass spectrometers.

Prior, David [Hermiston, OR; Price, John [Richland, WA; Bruce, Jim [Oceanside, CA

2002-09-24T23:59:59.000Z

403

Advanced Photon Source Upgrade Project - Materials  

ScienceCinema (OSTI)

An upgrade to Advanced Photon Source announced by DOE - http://go.usa.gov/ivZ -- will help scientists break through bottlenecks in materials design in order to develop materials with desirable functions.

Gibbson, Murray;

2013-04-19T23:59:59.000Z

404

Laser ion source with solenoid field  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

Pulse length extension of highly charged ion beam generated from a laser ion source is experimentally demonstrated. The laser ion source (LIS) has been recognized as one of the most powerful heavy ion source. However, it was difficult to provide long pulse beams. By applying a solenoid field (90 mT, 1 m) at plasma drifting section, a pulse length of carbon ion beam reached 3.2 ?s which was 4.4 times longer than the width from a conventional LIS. The particle number of carbon ions accelerated by a radio frequency quadrupole linear accelerator was 1.2 ◊ 1011, which was provided by a single 1 J Nd-YAG laser shot. A laser ion source with solenoid field could be used in a next generation heavy ion accelerator.

Kanesue, Takeshi [Brookhaven National Laboratory (BNL), Upton, NY (United States); Fuwa, Yasuhiro [Kyoto Univ., Kyoto (Japan); RIKEN (Japan); Kondo, Kotaro [Tokyo Institute of Technology, Tokyo (Japan); Okamura, Masahiro [Brookhaven National Laboratory (BNL), Upton, NY (United States)

2014-11-10T23:59:59.000Z

405

Advanced Light Source Activity Report 2002  

SciTech Connect (OSTI)

This annual report of the Advanced Light Source details science highlights and facility improvements during the year. It also offers information on events sponsored by the facility, technical specifications, and staff and publication information.

Duque, Theresa; Greiner, Annette; Moxon, Elizabeth; Robinson, Arthur; Tamura, Lori (Editors)

2003-06-12T23:59:59.000Z

406

FINLAND SOURCES 2007 -Forest industry production Authorities  

E-Print Network [OSTI]

FINLAND SOURCES 2007 - Forest industry production Print Home Finland Government Authorities Local administration Federations, organizations Company outlooks Industry ¬Ľ Overview ¬Ľ Forest industry production ¬Ľ Turnover ¬Ľ Profit ¬Ľ Energy Year 2006 ¬Ľ Shipping Business services Infrastructure Economy Education

407

SourceGas- Energy Efficiency Programs (Arkansas)  

Broader source: Energy.gov [DOE]

SourceGas offers its Arkansas residential and commercial customers mail-in rebates to help replace old, out-dated equipment with new energy- and natural gas-saving equipment. Customers must...

408

Supersoft Sources as SN Ia Progenitors  

E-Print Network [OSTI]

of the existence of supersoft X­ray sources. It is argued that SNe Ia are thermonuclear explosions of accreting C is that they represent thermonuclear disruptions of mass accreting white dwarfs (WDs). Thus, the basic ingredient

Greiner, Jochen

409

DSpace: An Open Source Dynamic Digital Repository  

E-Print Network [OSTI]

For the past two years the Massachusetts Institute of Technology (MIT) Libraries and Hewlett-Packard Labs have been collaborating on the development of an open source system called DSpace‚?Ę that functions as a repository ...

Smith, MacKenzie

410

The Electron Beam Ion Source (EBIS)  

ScienceCinema (OSTI)

Brookhaven National Lab has successfully developed a new pre-injector system, called the Electron Beam Ion Source, for the Relativistic Heavy Ion Collider (RHIC) and NASA Space Radiation Laboratory science programs. The first of several planned improvemen

Brookhaven Lab

2010-01-08T23:59:59.000Z

411

Advanced Photon Source Upgrade Project - Energy  

ScienceCinema (OSTI)

An upgrade to the Advanced Photon Source (announced by DOE - http://go.usa.gov/ivZ) will help scientists better understand complex environments such as in catalytic reactions.

Gibson, Murray; Chamberlain, Jeff; Young, Linda

2013-04-19T23:59:59.000Z

412

5, 52235252, 2005 Size-resolved source  

E-Print Network [OSTI]

, gasoline vehicle, diesel vehicle, copper smelter, and volcano emission. PMF analysis of size% in the fine size range (0.56¬≠2.5 ¬Ķm). The diesel vehicle source contributed the most in the ultra-fine size

Boyer, Edmond

413

Aspects of a high intensity neutron source  

E-Print Network [OSTI]

A unique methodology for creating a neutron source model was developed for deuterons and protons incident on solid phase beryllium and lithium targets. This model was then validated against experimental results already ...

Chapman, Peter H. (Peter Henry)

2010-01-01T23:59:59.000Z

414

Designing subwavelength-structured light sources  

E-Print Network [OSTI]

The laser has long been established as the best possible optical source for fundamental studies and applications requiring high field intensity, single mode operation, a high degree of coherence, a narrow linewidth and ...

Chua, Song Liang

2013-01-01T23:59:59.000Z

415

Tracing meteorite source regions through asteroid spectroscopy  

E-Print Network [OSTI]

By virtue of their landing on Earth, meteorites reside in near-Earth object (NEO) orbits prior to their arrival. Thus the population of observable NEOs, in principle, give the best representation of meteorite source bodies. ...

Thomas, Cristina Ana

2009-01-01T23:59:59.000Z

416

Asymmetric Architecture for Heralded Single Photon Sources  

E-Print Network [OSTI]

Single photon source represent a fundamental building block for optical implementations of quantum information tasks ranging from basic tests of quantum physics to quantum communication and high-resolution quantum measurement. In this paper we investigate the performance of a multiplexed system based on asymmetric configuration of multiple heralded single photon sources. {To compare the effectiveness of different designs we introduce a single-photon source performance index that is based on the value of single photon probability required to achieve a guaranteed signal to noise ratio.} The performance and scalability comparison with both currently existing multiple-source architectures and faint laser configurations reveals an advantage the proposed scheme offers in realistic scenarios. This analysis also provides insights on the potential of using such architectures for integrated implementation.

Luca Mazzarella; Francesco Ticozzi; Alexander V. Sergienko; Giuseppe Vallone; Paolo Villoresi

2013-02-15T23:59:59.000Z

417

Advanced Light Source Activity Report 2000  

SciTech Connect (OSTI)

This is an annual report, detailing activities at the Advanced Light Source for the year 2000. It includes highlights of scientific research by users of the facility as well as information about the development of the facility itself.

Greiner, A.; Moxon, L.; Robinson, A.; Tamura, L.

2001-04-01T23:59:59.000Z

418

Cryogenic hydrogen circulation system of neutron source  

SciTech Connect (OSTI)

Cold neutron sources of reactors and spallation neutron sources are classic high flux neutron sources in operation all over the world. Cryogenic fluids such as supercritical or supercooled hydrogen are commonly selected as a moderator to absorb the nuclear heating from proton beams. By comparing supercritical hydrogen circulation systems and supercooled hydrogen circulation systems, the merits and drawbacks in both systems are summarized. When supercritical hydrogen circulates as the moderator, severe pressure fluctuations caused by temperature changes will occur. The pressure control system used to balance the system pressure, which consists of a heater as an active controller for thermal compensation and an accumulator as a passive volume controller, is preliminarily studied. The results may provide guidelines for design and operation of other cryogenic hydrogen system for neutron sources under construction.

Qiu, Y. N. [Institute of Physics and Chemistry, Chinese Academy of Sciences, BJ100190 China and University of Chinese Academy of Sciences, Chinese Academy of Sciences, BJ100049 (China); Hu, Z. J.; Wu, J. H.; Li, Q.; Zhang, Y. [Institute of Physics and Chemistry, Chinese Academy of Sciences, BJ100190 (China); Zhang, P. [School of Energy and Power Engineering, HuaZhong University of Science and Technology, WH430074 (China); Wang, G. P. [Institute of High Energy Physics, Chinese Academy of Sciences, BJ100049 (China)

2014-01-29T23:59:59.000Z

419

New neutron physics using spallation sources  

SciTech Connect (OSTI)

The extraordinary neutron intensities available from the new spallation pulsed neutron sources open up exciting opportunities for basic and applied research in neutron nuclear physics. The energy range of neutron research which is being explored with these sources extends from thermal energies to almost 800 MeV. The emphasis here is on prospective experiments below 100 keV neutron energy using the intense neutron bursts produced by the Proton Storage Ring (PSR) at Los Alamos. 30 refs., 10 figs.

Bowman, C.D.

1988-01-01T23:59:59.000Z

420

The Advanced Photon Source main control room  

SciTech Connect (OSTI)

The Advanced Photon Source at Argonne National Laboratory is a third-generation light source built in the 1990s. Like the machine itself, the Main Control Room (MCR) employs design concepts based on today`s requirements. The discussion will center on ideas used in the design of the MCR, the comfort of personnel using the design, and safety concerns integrated into the control room layout.

Pasky, S.

1998-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

ON COMPUTING UPPER LIMITS TO SOURCE INTENSITIES  

SciTech Connect (OSTI)

A common problem in astrophysics is determining how bright a source could be and still not be detected in an observation. Despite the simplicity with which the problem can be stated, the solution involves complicated statistical issues that require careful analysis. In contrast to the more familiar confidence bound, this concept has never been formally analyzed, leading to a great variety of often ad hoc solutions. Here we formulate and describe the problem in a self-consistent manner. Detection significance is usually defined by the acceptable proportion of false positives (background fluctuations that are claimed as detections, or Type I error), and we invoke the complementary concept of false negatives (real sources that go undetected, or Type II error), based on the statistical power of a test, to compute an upper limit to the detectable source intensity. To determine the minimum intensity that a source must have for it to be detected, we first define a detection threshold and then compute the probabilities of detecting sources of various intensities at the given threshold. The intensity that corresponds to the specified Type II error probability defines that minimum intensity and is identified as the upper limit. Thus, an upper limit is a characteristic of the detection procedure rather than the strength of any particular source. It should not be confused with confidence intervals or other estimates of source intensity. This is particularly important given the large number of catalogs that are being generated from increasingly sensitive surveys. We discuss, with examples, the differences between these upper limits and confidence bounds. Both measures are useful quantities that should be reported in order to extract the most science from catalogs, though they answer different statistical questions: an upper bound describes an inference range on the source intensity, while an upper limit calibrates the detection process. We provide a recipe for computing upper limits that applies to all detection algorithms.

Kashyap, Vinay L.; Siemiginowska, Aneta [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States); Van Dyk, David A.; Xu Jin [Department of Statistics, University of California, Irvine, CA 92697-1250 (United States); Connors, Alanna [Eureka Scientific, 2452 Delmer Street, Suite 100, Oakland, CA 94602-3017 (United States); Freeman, Peter E. [Department of Statistics, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, PA 15213 (United States); Zezas, Andreas, E-mail: vkashyap@cfa.harvard.ed, E-mail: asiemiginowska@cfa.harvard.ed, E-mail: dvd@ics.uci.ed, E-mail: jinx@ics.uci.ed, E-mail: aconnors@eurekabayes.co, E-mail: pfreeman@cmu.ed, E-mail: azezas@cfa.harvard.ed [Physics Department, University of Crete, P.O. Box 2208, GR-710 03, Heraklion, Crete (Greece)

2010-08-10T23:59:59.000Z

422

A Polarized Positron Source for CEBAF  

SciTech Connect (OSTI)

A compact polarized positron source for Jefferson Lab is discussed. This scheme relies upon a high polarization (85%), high current (1 mA), low-energy (<100 MeV) electron beam to generate polarized positrons in a conversion target via polarized bremsstrahlung and pair creation. GEANT4 is used to simulate source distributions suitable for a CEBAF-like injector with positron polarization approx60% and nano-Ampere intensity. An experiment to test this scheme is outlined.

Dumas, J. [Laboratoire de Physique Subatomique et de Cosmologie, IN2P3/CNRS-Universite Joseph Fourier-INP, 53, rue des Martyrs, 38026 Grenoble Cedex (France); Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Grames, J. [Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Voutier, E. [Laboratoire de Physique Subatomique et de Cosmologie, IN2P3/CNRS-Universite Joseph Fourier-INP, 53, rue des Martyrs, 38026 Grenoble Cedex (France)

2009-09-02T23:59:59.000Z

423

Fluid driven torsional dipole seismic source  

DOE Patents [OSTI]

A compressible fluid powered oscillating downhole seismic source device capable of periodically generating uncontaminated horizontally-propagated, shear waves is provided. A compressible fluid generated oscillation is created within the device which imparts an oscillation to a housing when the device is installed in a housing such as the cylinder off an existing downhole tool, thereby a torsional seismic source is established. Horizontal waves are transferred to the surrounding bore hole medium through downhole clamping.

Hardee, Harry C. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

424

Source Recertification, Refurbishment, and Transfer Logistics  

SciTech Connect (OSTI)

The 2012 Gap Analysis of Department of Energy Radiological Sealed Sources, Standards, and Materials for Safeguards Technology Development [1] report, and the subsequent Reconciliation of Source Needs and Surpluses across the U.S. Department of Energy National Laboratory Complex [2] report, resulted in the identification of 33 requests for nuclear or radiological sealed sources for which there was potentially available, suitable material from within the U.S. Department of Energy (DOE) complex to fill the source need. Available, suitable material was defined by DOE laboratories as material slated for excess, or that required recertification or refurbishment before being used for safeguards technology development. This report begins by outlining the logistical considerations required for the shipment of nuclear and radiological materials between DOE laboratories. Then, because of the limited need for transfer of matching sources, the report also offers considerations for an alternative approach Ė the shipment of safeguards equipment between DOE laboratories or technology testing centers. Finally, this report addresses repackaging needs for the two source requests for which there was available, suitable material within the DOE complex.

Gastelum, Zoe N.; Duckworth, Leesa L.; Greenfield, Bryce A.; Doll, Stephanie R.

2013-09-01T23:59:59.000Z

425

Special Application Thermoelectric Micro Isotope Power Sources  

SciTech Connect (OSTI)

Promising design concepts for milliwatt (mW) size micro isotope power sources (MIPS) are being sought for use in various space and terrestrial applications, including a multitude of future NASA scientific missions and a range of military applications. To date, the radioisotope power sources (RPS) used on various space and terrestrial programs have provided power levels ranging from one-half to several hundred watts. In recent years, the increased use of smaller spacecraft and planned new scientific space missions by NASA, special terrestrial and military applications suggest the need for lower power, including mW level, radioisotope power sources. These power sources have the potential to enable such applications as long-lived meteorological or seismological stations distributed across planetary surfaces, surface probes, deep space micro-spacecraft and sub-satellites, terrestrial sensors, transmitters, and micro-electromechanical systems. The power requirements are in the range of 1 mW to several hundred mW. The primary technical requirements for space applications are long life, high reliability, high specific power, and high power density, and those for some special military uses are very high power density, specific power, reliability, low radiological induced degradation, and very low radiation leakage. Thermoelectric conversion is of particular interest because of its technological maturity and proven reliability. This paper summarizes the thermoelectric, thermal, and radioisotope heat source designs and presents the corresponding performance for a number of mW size thermoelectric micro isotope power sources.

Heshmatpour, Ben; Lieberman, Al; Khayat, Mo; Leanna, Andrew; Dobry, Ted [Teledyne Energy Systems, Incorporated, 10707 Gilroy Road, Hunt Valley, MD 21031 (United States)

2008-01-21T23:59:59.000Z

426

Quantum key distribution with entangled photon sources  

E-Print Network [OSTI]

A parametric down-conversion (PDC) source can be used as either a triggered single photon source or an entangled photon source in quantum key distribution (QKD). The triggering PDC QKD has already been studied in the literature. On the other hand, a model and a post-processing protocol for the entanglement PDC QKD are still missing. In this paper, we fill in this important gap by proposing such a model and a post-processing protocol for the entanglement PDC QKD. Although the PDC model is proposed to study the entanglement-based QKD, we emphasize that our generic model may also be useful for other non-QKD experiments involving a PDC source. Since an entangled PDC source is a basis independent source, we apply Koashi-Preskill's security analysis to the entanglement PDC QKD. We also investigate the entanglement PDC QKD with two-way classical communications. We find that the recurrence scheme increases the key rate and Gottesman-Lo protocol helps tolerate higher channel losses. By simulating a recent 144km open-a...

Ma, X; Lo, H K; Ma, Xiongfeng; Fung, Chi-Hang Fred; Lo, Hoi-Kwong

2007-01-01T23:59:59.000Z

427

Radioisotope Power Sources for MEMS Devices,  

SciTech Connect (OSTI)

Microelectromechanical systems (MEMS) comprise a rapidly expanding research field with potential applications varying from sensors in airbags to more recent optical applications. Depending on the application, these devices often require an on-board power source for remote operation, especially in cases requiring operation for an extended period of time. Previously suggested power sources include fossil fuels and solar energy, but nuclear power sources may provide significant advantages for certain applications. Hence, the objective of this study is to establish the viability of using radioisotopes to power realistic MEMS devices. A junction-type battery was constructed using silicon and a {sup 63}Ni liquid source. A source volume containing 64 {micro}Ci provided a power of {approx}0.07 nW. A more novel application of nuclear sources for MEMS applications involves the creation of a resonator that is driven by charge collection in a cantilever beam. Preliminary results have established the feasibility of this concept, and future work will optimize the design for various applications.

Blanchard, J.P.

2001-06-17T23:59:59.000Z

428

E-Print Network 3.0 - african coal sources Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

In 2003, the South African synthetic fuel industry consumed 24... of synthetic fuels in South Africa, this must also reflect their coal consumption (Figure 2). South African......

429

Sources and Fate of Chromophoric Dissolved Organic Matter in the Arctic Ocean and Surrounding Watersheds  

E-Print Network [OSTI]

Drift UHW Upper halocline water layer WGC West Greenland Current ix TABLE OF CONTENTS Page ABSTRACT... .................................................................................................. vii TABLE OF CONTENTS .......................................................................................... ix LIST OF FIGURES ................................................................................................... xii LIST...

Walker, Sally Annette

2012-10-19T23:59:59.000Z

430

In-Source Fragmentation and the Sources of Partially Tryptic Peptides in Shotgun Proteomics  

SciTech Connect (OSTI)

Partially tryptic peptides are often identified in shotgun proteomics using trypsin as the proteolytic enzyme; however, it has been controversial regarding the sources of such partially tryptic peptides. Herein we investigate the impact of in-source fragmentation on shotgun proteomics using three biological samples, including a standard protein mixture, a mouse brain tissue homogenate, and a mouse plasma sample. Since the in-source fragments of a peptide retain the same elution time with its parent fully tryptic peptide, the partially tryptic peptides from in-source fragmentation can be distinguished from the other partially tryptic peptides by plotting the observed retention times against the computationally predicted retention times. Most partially tryptic in-source fragmentation artifacts were misaligned from the linear distribution of fully tryptic peptides. The impact of in-source fragmentation on peptide identifications was clearly significant in a less complex sample such as a standard protein digest, where ~60 % of unique peptides were observed as partially tryptic peptides from in-source fragmentation. In mouse brain or mouse plasma samples, in-source fragmentation contributed to 1-3 % of all identified peptides. The other major source of partially tryptic peptides in complex biological samples is presumably proteolytic processing by endogenous proteases in the samples. By filtering out the in-source fragmentation artifacts from the identified partially tryptic or non-tryptic peptides, it is possible to directly survey in-vivo proteolytic processing in biological samples such as blood plasma. ?

Kim, Jong Seo; Monroe, Matthew E.; Camp, David G.; Smith, Richard D.; Qian, Weijun

2013-02-01T23:59:59.000Z

431

Management of Scientific Images: an approach to the extraction, annotation and retrieval of figures in the field of High Energy Physics  

E-Print Network [OSTI]

The information environment of the first decade of the XXIst century is unprecedented. The physical barriers limiting access to the knowledge are disappearing as traditional methods of accessing information are being replaced or enhanced by computer systems. Digital systems are able to manage much larger sets of documents, confronting information users with the deluge of documents related to their topic of interest. This new situation created an incentive for the rapid development of Data Mining techniques and to the creation of more efficient search engines capable of limiting the search results to a small subset of the most relevant ones. However, most of the up to date search engines operate using the text descriptions of the documents. Those descriptions can either be extracted from the content of the document or be obtained from the external sources. The retrieval based on the non-textual content of documents is a subject of ongoing research. In particular, the retrieval of images and unlocking the infor...

Praczyk, Piotr Adam; Mele, Salvatore

432

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

U.S. Energy Information Administration (EIA) Indexed Site

4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1996 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

433

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Gasoline and Diesel Fuel Update (EIA)

4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1995 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

434

Source: Energy Information Administration, Form EIA-782A, "Refiners...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1997 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

435

Quantum key distribution with entangled photon sources  

E-Print Network [OSTI]

A parametric down-conversion (PDC) source can be used as either a triggered single photon source or an entangled photon source in quantum key distribution (QKD). The triggering PDC QKD has already been studied in the literature. On the other hand, a model and a post-processing protocol for the entanglement PDC QKD are still missing. In this paper, we fill in this important gap by proposing such a model and a post-processing protocol for the entanglement PDC QKD. Although the PDC model is proposed to study the entanglement-based QKD, we emphasize that our generic model may also be useful for other non-QKD experiments involving a PDC source. Since an entangled PDC source is a basis independent source, we apply Koashi-Preskill's security analysis to the entanglement PDC QKD. We also investigate the entanglement PDC QKD with two-way classical communications. We find that the recurrence scheme increases the key rate and Gottesman-Lo protocol helps tolerate higher channel losses. By simulating a recent 144km open-air PDC experiment, we compare three implementations -- entanglement PDC QKD, triggering PDC QKD and coherent state QKD. The simulation result suggests that the entanglement PDC QKD can tolerate higher channel losses than the coherent state QKD. The coherent state QKD with decoy states is able to achieve highest key rate in the low and medium-loss regions. By applying Gottesman-Lo two-way post-processing protocol, the entanglement PDC QKD can tolerate up to 70dB combined channel losses (35dB for each channel) provided that the PDC source is placed in between Alice and Bob. After considering statistical fluctuations, the PDC setup can tolerate up to 53dB channel losses.

Xiongfeng Ma; Chi-Hang Fred Fung; Hoi-Kwong Lo

2007-03-14T23:59:59.000Z

436

ATLBS EXTENDED SOURCE SAMPLE: THE EVOLUTION IN RADIO SOURCE MORPHOLOGY WITH FLUX DENSITY  

SciTech Connect (OSTI)

Based on the Australia Telescope Low Brightness Survey (ATLBS) we present a sample of extended radio sources and derive morphological properties of faint radio sources. One hundred nineteen radio galaxies form the ATLBS Extended Source Sample (ATLBS-ESS) consisting of all sources exceeding 30'' in extent and integrated flux densities exceeding 1 mJy. We give structural details along with information on galaxy identifications and source classifications. The ATLBS-ESS, unlike samples with higher flux-density limits, has almost equal fractions of FR-I and FR-II radio galaxies, with a large fraction of the FR-I population exhibiting 3C31-type structures. Significant asymmetry in lobe extents appears to be a common occurrence in the ATLBS-ESS FR-I sources compared with FR-II sources. We present a sample of 22 FR-Is at z > 0.5 with good structural information. The detection of several giant radio sources, with size exceeding 0.7 Mpc, at z > 1 suggests that giant radio sources are not less common at high redshifts. The ESS also includes a sample of 28 restarted radio galaxies. The relative abundance of dying and restarting sources is indicative of a model where radio sources undergo episodic activity in which an active phase is followed by a brief dying phase that terminates with restarting of the central activity; in any massive elliptical a few such activity cycles wherein adjacent events blend may constitute the lifetime of a radio source and such bursts of blended activity cycles may be repeated over the age of the host. The ATLBS-ESS includes a 2 Mpc giant radio galaxy with the lowest surface brightness lobes known to date.

Saripalli, L.; Subrahmanyan, R.; Thorat, K.; Ekers, R. D. [Raman Research Institute, C. V. Raman Avenue, Sadashivanagar, Bangalore 560080 (India); Hunstead, R. W.; Johnston, H. M.; Sadler, E. M., E-mail: lsaripal@rri.res.in [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia)

2012-04-01T23:59:59.000Z

437

Note: Development of ESS Bilbao's proton ion source: Ion Source Hydrogen Positive  

SciTech Connect (OSTI)

The Ion Source Hydrogen positive is a 2.7 GHz off-resonance microwave discharge ion source. It uses four coils to generate an axial magnetic field in the plasma chamber around 0.1 T that exceeds the ECR resonance field. A new magnetic system was designed as a combination of the four coils and soft iron in order to increase the reliability of the source. The description of the simulations of the magnetic field and the comparison with the magnetic measurements are presented. Moreover, results of the initial commissioning of the source for extraction voltage until 50 kV will be reported.

Miracoli, R., E-mail: rmiracoli@essbilbao.org; Feuchtwanger, J.; Arredondo, I.; Belver, D.; Gonzalez, P. J.; Corres, J.; Djekic, S.; Echevarria, P.; Eguiraun, M.; Garmendia, N.; Muguira, L. [ESS-Bilbao, Leioa (Spain)] [ESS-Bilbao, Leioa (Spain)

2014-02-15T23:59:59.000Z

438

BLIND AUDIO SOURCE SEPARATION USING SHORT+LONG TERM AR SOURCE MODELS AND SPECTRUM MATCHING  

E-Print Network [OSTI]

) determined case the source separation can be performed satisfactorily, especially in a clean environment industrial partners: BMW Group, Cisco Systems, Monaco Telecom, Orange, SAP, SFR, STEr- icsson, Swisscom

Gesbert, David

439

Accelerator Sources for THz science: A Review  

SciTech Connect (OSTI)

Free Electron Lasers have been around since 1977 providing not only a test bed for the physics of FELs and electron/photon interactions but as a workhorse of scientific research. More than 30 FELs are presently operating around the world spanning a wavelength range from the millimeter region to the hard x-ray using direct current and rf linear accelerators or storage rings as electron sources. The characteristics that have driven the development of these sources are the desire for high peak and average power, high micropulse energies, wavelength tunability, timing flexibility, and wavelengths that are unavailable from more conventional laser sources. Operation of FELs in the far infrared to terahertz regime poses special challenges which have been and are being addressed at a number of facilities around the world. This paper will review a number of former and existing FELs operating in this regime and discuss future efforts. Broadband collective radiation from relativistic electrons also plays a significant role in the production of FIR/THz radiation and several groups are taking advantage of this source for users. Applications for use of the radiation have evolved from simple imaging to complex pump probe tests of insulator/metal transitions and energy flow in organic molecules. We will discuss the technologies for generating the IR/FIR/THz radiation and cover some of the unique applications of such sources.

Neil, George R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)

2014-01-01T23:59:59.000Z

440

Light sources based on semiconductor current filaments  

DOE Patents [OSTI]

The present invention provides a new type of semiconductor light source that can produce a high peak power output and is not injection, e-beam, or optically pumped. The present invention is capable of producing high quality coherent or incoherent optical emission. The present invention is based on current filaments, unlike conventional semiconductor lasers that are based on p-n junctions. The present invention provides a light source formed by an electron-hole plasma inside a current filament. The electron-hole plasma can be several hundred microns in diameter and several centimeters long. A current filament can be initiated optically or with an e-beam, but can be pumped electrically across a large insulating region. A current filament can be produced in high gain photoconductive semiconductor switches. The light source provided by the present invention has a potentially large volume and therefore a potentially large energy per pulse or peak power available from a single (coherent) semiconductor laser. Like other semiconductor lasers, these light sources will emit radiation at the wavelength near the bandgap energy (for GaAs 875 nm or near infra red). Immediate potential applications of the present invention include high energy, short pulse, compact, low cost lasers and other incoherent light sources.

Zutavern, Fred J. (Albuquerque, NM); Loubriel, Guillermo M. (Albuquerque, NM); Buttram, Malcolm T. (Sandia Park, NM); Mar, Alan (Albuquerque, NM); Helgeson, Wesley D. (Albuquerque, NM); O'Malley, Martin W. (Edgewood, NM); Hjalmarson, Harold P. (Albuquerque, NM); Baca, Albert G. (Albuquerque, NM); Chow, Weng W. (Cedar Crest, NM); Vawter, G. Allen (Albuquerque, NM)

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Free and Open Source Software for Development  

E-Print Network [OSTI]

Development organizations and International Non-Governmental Organizations have been emphasizing the high potential of Free and Open Source Software for the Less Developed Countries. Cost reduction, less vendor dependency and increased potential for local capacity development have been their main arguments. In spite of its advantages, Free and Open Source Software is not widely adopted at the African continent. In this book the authors will explore the grounds on with these expectations are based. Where do they come from and is there evidence to support these expectations? Over the past years several projects have been initiated and some good results have been achieved, but at the same time many challenges were encountered. What lessons can be drawn from these experiences and do these experiences contain enough evidence to support the high expectations? Several projects and their achievements will be considered. In the final part of the book the future of Free and Open Source Software for Development will be explored. Special attention is given to the African continent since here challenges are highest. What is the role of Free and open Source Software for Development and how do we need to position and explore the potential? What are the threats? The book aims at professionals that are engaged in the design and implementation of ICT for Development (ICT4D) projects and want to improve their understanding of the role Free and Open Source Software can play.

Victor van Reijswoud; Arjan de Jager

2008-08-27T23:59:59.000Z

442

Particle size distribution of indoor aerosol sources  

SciTech Connect (OSTI)

As concern about Indoor Air Quality (IAQ) has grown in recent years, it has become necessary to determine the nature of particles produced by different indoor aerosol sources and the typical concentration that these sources tend to produce. These data are important in predicting the dose of particles to people exposed to these sources and it will also enable us to take effective mitigation procedures. Further, it will also help in designing appropriate air cleaners. A new state of the art technique, DMPS (Differential Mobility Particle Sizer) System is used to determine the particle size distributions of a number of sources. This system employs the electrical mobility characteristics of these particles and is very effective in the 0.01--1.0 {mu}m size range. A modified system that can measure particle sizes in the lower size range down to 3 nm was also used. Experimental results for various aerosol sources is presented in the ensuing chapters. 37 refs., 20 figs., 2 tabs.

Shah, K.B.

1990-10-24T23:59:59.000Z

443

Supernate source term analysis: Revision 1  

SciTech Connect (OSTI)

The HM Process (modified PUREX) has been used in the H-Canyon since 1959 to recover uranium and byproduct neptunium. The PUREX process has been used in the Separation facilities in F and H-Area. This report analyzes both the inhalation and ingestion radionuclide dose impact of the HM and PUREX process soluble portion of their waste streams. The spent fuel assemblies analyzed are the Mark 16B, Mar 22 for the HM process, and the Mark 31A, Mark 31B for the PUREX process. The results from this analysis are combined with an analysis of the current Safety Analysis Report SAR source term to evaluate source terms for HLW supernate. Analysis of fission yield data and SAR source term values demonstrates that a limited number of radionuclides contribute 1% or more to the total dose and that cesium and plutonium isotopes are the radionuclides with major impact in the supernate source term. This report analyses both volatile and evaporative impact as recommended by DOE guidance. In reality, the only radionuclide volatilized during evaporative conditions is tritium. No evidence of selective volatility occurs during forced evaporation in HLW. The results obtained permit reducing the list of radionuclides to be considered in the development of source terms to support the High Level Waste Safety Analysis Report.

Aponte, C.I.

1994-10-13T23:59:59.000Z

444

Ion sources for ion implantation technology (invited)  

SciTech Connect (OSTI)

Ion sources for ion implantation are introduced. The technique is applied not only to large scale integration (LSI) devices but also to flat panel display. For LSI fabrication, ion source scheduled maintenance cycle is most important. For CMOS image sensor devices, metal contamination at implanted wafer is most important. On the other hand, to fabricate miniaturized devices, cluster ion implantation has been proposed to make shallow PN junction. While for power devices such as silicon carbide, aluminum ion is required. For doping processes of LCD fabrication, a large ion source is required. The extraction area is about 150 cm ◊ 10 cm, and the beam uniformity is important as well as the total target beam current.

Sakai, Shigeki, E-mail: sakai-shigeki@nissin.co.jp; Hamamoto, Nariaki; Inouchi, Yutaka; Umisedo, Sei; Miyamoto, Naoki [Nissin Ion Equipment co., ltd, 575 Kuze-Tonoshiro-cho Minami-ku, Kyoto 601-8205 (Japan)] [Nissin Ion Equipment co., ltd, 575 Kuze-Tonoshiro-cho Minami-ku, Kyoto 601-8205 (Japan)

2014-02-15T23:59:59.000Z

445

An Efficient RF Source for Jlab  

SciTech Connect (OSTI)

We propose the development of a highly reliable high efficiency RF source for JLAB with a lower lifetime cost operating at 80% efficiency with system operating costs of about 0.7M$/year for the 6 GeV machine. The design of the RF source will be based upon two injection locked magnetrons in a novel combining architecture for amplitude modulation and a cross field amplifier (CFA) as an output tube for the 12 GeV upgrade. A cost analysis including efficiency and reliability will be performed to determine the optimum system architecture. Several different system architectures will be designed and evaluated for a dual injection locked magnetron source using novel combining techniques and possibly a CFA as the output tube. A paper design for the 1497 MHz magnetron system will be completed. The optimum system architecture with all relevant specifications will be completed so that a prototype can be built.

Neubauer, M. [Muons, Inc.; Dudas, A. [Muons, Inc.; Rimmer, Robert A. [JLAB; Wang, Haipeng [JLAB

2013-12-01T23:59:59.000Z

446

Sources of Gravitational Waves: Theory and Observations  

E-Print Network [OSTI]

Gravitational-wave astronomy will soon become a new tool for observing the Universe. Detecting and interpreting gravitational waves will require deep theoretical insights into astronomical sources. The past three decades have seen remarkable progress in analytical and numerical computations of the source dynamics, development of search algorithms and analysis of data from detectors with unprecedented sensitivity. This Chapter is devoted to examine the advances and future challenges in understanding the dynamics of binary and isolated compact-object systems, expected cosmological sources, their amplitudes and rates, and highlights of results from gravitational-wave observations. All of this is a testament to the readiness of the community to open a new window for observing the cosmos, a century after gravitational waves were first predicted by Albert Einstein.

Alessandra Buonanno; B. S. Sathyaprakash

2014-10-28T23:59:59.000Z

447

Source replenishment device for vacuum deposition  

DOE Patents [OSTI]

A material source replenishment device for use with a vacuum deposition apparatus is described. The source replenishment device comprises an intermittent motion producing gear arrangement disposed within the vacuum deposition chamber. An elongated rod having one end operably connected to the gearing arrangement is provided with a multiarmed head at the opposite end disposed adjacent the heating element of the vacuum deposition apparatus. An inverted U-shaped source material element is releasably attached to the outer end of each arm member whereby said multiarmed head is moved to locate a first of said material elements above said heating element, whereupon said multiarmed head is lowered to engage said material element with the heating element and further lowered to release said material element on the heating element. After vaporization of said material element, second and subsequent material elements may be provided to the heating element without the need for opening the vacuum deposition apparatus to the atmosphere.

Hill, R.A.

1986-05-15T23:59:59.000Z

448

Neutron sources: Present practice and future potential  

SciTech Connect (OSTI)

The present capability and future potential of accelerator-based monoenergetic and white neutron sources are outlined in the context of fundamental and applied neutron-nuclear research. The neutron energy range extends from thermal to 500 MeV, and the time domain from steady-state to pico-second pulsed sources. Accelerator technology is summarized, including the production of intense light-ion, heavy-ion and electron beams. Target capabilities are discussed with attention to neutron-producing efficiency and power-handling capabilities. The status of underlying neutron-producing reactions is summarized. The present and future use of neutron sources in: fundamental neutron-nuclear research, nuclear data acquisition, materials damage studies, engineering tests, and biomedical applications are discussed. Emphasis is given to current status, near-term advances well within current technology, and to long-range projections. 90 refs., 4 figs.

Cierjacks, S.; Smith, A.B.

1988-01-01T23:59:59.000Z

449

Present state of the SOURCES computer code  

SciTech Connect (OSTI)

In various stages of development for over two decades, the SOURCES computer code continues to calculate neutron production rates and spectra from four types of problems: homogeneous media, two-region interfaces, three-region interfaces and that of a monoenergetic alpha particle beam incident on a slab of target material. Graduate work at the University of Missouri - Rolla, in addition to user feedback from a tutorial course, provided the impetus for a variety of code improvements. Recently upgraded to version 4B, initial modifications to SOURCES focused on updates to the 'tape5' decay data library. Shortly thereafter, efforts focused on development of a graphical user interface for the code. This paper documents the Los Alamos SOURCES Tape1 Creator and Library Link (LASTCALL) and describes additional library modifications in more detail. Minor improvements and planned enhancements are discussed.

Shores, E. F. (Erik F.)

2002-01-01T23:59:59.000Z

450

Scientific Needs for Future X-ray Sources in the U.S. -- A White Paper  

SciTech Connect (OSTI)

Many of the important challenges facing humanity, including developing alternative sources of energy and improving heath, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. Since the fundamental interaction that holds matter together is of electromagnetic origin, it is intuitively clear that electromagnetic radiation is the critical tool in the study of material properties. On the level of atoms, electrons and spins, x rays have proved especially valuable.

Falcone, Roger; Stohr, Joachim; Bergmann, Uwe; Corlett, John; Galayda, John; Hastings, Jerry; Hettel, Bob; Hussain, Zahid; Kirz, Janos; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z.-X.; Schoenlein, Bob; Zholents, Alexander

2008-10-16T23:59:59.000Z

451

Stress Wave Source Characterization: Impact, Fracture, and Sliding Friction  

E-Print Network [OSTI]

stress wave sources from the PMMA and rock are then linkedof a 3-D source inside an artificial rock, J. Sound Vib.two different calibration sources on the rock base plate. a,

McLaskey, Gregory Christofer

2011-01-01T23:59:59.000Z

452

TR-025 Geomorphology March 2003 Schmidt Creek Sediment Sources  

E-Print Network [OSTI]

TR-025 Geomorphology March 2003 Schmidt Creek Sediment Sources and the Johnstone Strait Killer, Thomas. 2003. Schmidt Creek Sediment Sources and the Johnstone Strait Killer Whale Rubbing Beach. Res.................................................................................................................... 2 3. Sediment Sources - Natural and Logging Related

453

MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP  

E-Print Network [OSTI]

MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr.................................................................................................................... 16 MODELING OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS

454

Sources of error in chilled and hot water metering at shared sites: differential pressure transmitters and flowmeter installation  

E-Print Network [OSTI]

2. 1 Annubar schematic Figure 2. 2 An example Annubar flowmeter Figure 2. 3 Schematic of a venturi meter 10 Figure 2. 4 Differential pressure transmitter Figure 2 5 Transmitter mternal schematic Figure 2. 6 Example transmitter output for a 16... for the Texas AdtM University Physical Plant. It is important the ESL have confidence in the accuracy of these meters to have confidence in their energy savings analysis. However, many of the buildings were contmually operating at low flows, i. e. , flows...

Corley, Megan Anne

2012-06-07T23:59:59.000Z

455

Europeans plans their next big source  

SciTech Connect (OSTI)

European neutron-scattering researchers announced the next step in plans to build the world`s most powerful pulsed-neutron source by 2010. A just released three year technical study detailed the technical specifications for the new machine, and the five partner institutions agreed to seek funding for a 3-year research and development phase to prove the concept. This article goes on to discuss the possibilities and the future for the European Spallation Source (ESS) neutron facility, and well as the funding problems.

Hellemans, A.

1997-05-09T23:59:59.000Z

456

Cationically polymerizable monomers derived from renewable sources  

SciTech Connect (OSTI)

The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year's research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

Crivello, J.V.

1992-10-01T23:59:59.000Z

457

Synchronization System for Next Generation Light Sources  

SciTech Connect (OSTI)

An alternative synchronization technique Ė one that would allow explicit control of the pulse train including its repetition rate and delay is clearly desired. We propose such a scheme. Our method is based on optical interferometry and permits synchronization of the pulse trains generated by two independent mode-locked lasers. As the next generation x-ray sources will be driven by a clock signal derived from a mode-locked optical source, our technique will provide a way to synchronize x-ray probe with the optical pump pulses.

Zavriyev, Anton

2014-03-27T23:59:59.000Z

458

Open Source Software Update | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLCDiesel Engines |Open Source Software Update Open Source

459

POET: A Scripting Language For Applying Parameterized Source-to-source Program  

E-Print Network [OSTI]

POET: A Scripting Language For Applying Parameterized Source-to-source Program Transformations Qing Yi (qingyi@cs.utsa.edu) University of Texas at San Antonio Abstract We present POET, a scripting as well as building ad-hoc translators between these languages. We have used POET to support a large

Yi, Qing

460

POET: A Scripting Language For Applying Parameterized Source-to-source Program  

E-Print Network [OSTI]

POET: A Scripting Language For Applying Parameterized Source-to-source Program Transformations Qing Yi (qingyi@cs.utsa.edu) University of Texas at San Antonio Abstract We present POET, a scripting as well as building ad- hoc translators between these languages. We have used POET to support a large

Yi, Qing

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

DEVELOPMENT OF NEW MID-INFRARED ULTRAFAST LASER SOURCES FOR COMPACT COHERENT X-RAY SOURCES  

SciTech Connect (OSTI)

In this project, we proposed to develop laser based mid-infrared lasers as a potentially robust and reliable source of ultrafast pulses in the mid-infrared region of the spectrum, and to apply this light source to generating bright, coherent, femtosecond-to-attosecond x-ray beams.

Sterling Backus

2012-05-14T23:59:59.000Z

462

Recovery Act - Geothermal Technologies Program:Ground Source...  

Broader source: Energy.gov (indexed) [DOE]

Recovery Act - Geothermal Technologies Program:Ground Source Heat Pumps Recovery Act - Geothermal Technologies Program:Ground Source Heat Pumps A detailled description of the...

463

Integration of Novel Flux Coupling Motor and Current Source Inverter...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Current Source Inverters for HEVs and FCVs Vehicle Technologies Office Merit Review 2014: Wireless Charging Integration of Novel Flux Coupling Motor and Current Source Inverter...

464

acoustic source localization: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Dan 113 2011 IEEE Workshop on Applications of Signal Processing to Audio and Acoustics October 16-19, 2011, New Paltz, NY INFORMED SOURCE SEPARATION: UNDERDETERMINED SOURCE SIGNAL...

465

Sources of Technical Variability in Quantitative LC-MS Proteomics...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sources of Technical Variability in Quantitative LC-MS Proteomics: Human Brain Tissue Sample Analysis. Sources of Technical Variability in Quantitative LC-MS Proteomics: Human...

466

adjacent point sources: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

extraction capabilities of MOPEX. Point source extraction is implemented as a two step process: point source detection and profile fitting. Non-linear matched filtering of input...

467

Data Analysis from Ground Source Heat Pump Demonstration Projects...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Analysis from Ground Source Heat Pump Demonstration Projects Data Analysis from Ground Source Heat Pump Demonstration Projects Comparison of building energy use before and after...

468

Oak Ridge Removes Laboratory's Greatest Source of Groundwater...  

Broader source: Energy.gov (indexed) [DOE]

Removes Laboratory's Greatest Source of Groundwater Contamination Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination May 1, 2012 - 12:00pm Addthis Workers...

469

Advanced Variable Speed Air-Source Integrated Heat Pump 2013...  

Energy Savers [EERE]

Advanced Variable Speed Air-Source Integrated Heat Pump 2013 Peer Review Advanced Variable Speed Air-Source Integrated Heat Pump 2013 Peer Review Emerging Technologies Project for...

470

Stanford Synchrotron Radiation Light Source (SSRL) | U.S. DOE...  

Office of Science (SC) Website

Syncrotron Light Source (NSLS-II) Stanford Synchrotron Radiation Light Source (SSRL) Neutron Scattering Facilities Nanoscale Science Research Centers (NSRCs) Projects...

471

Piezotube Borehole Seismic Source for Continuous Crosswell Monitoring...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Piezotube Borehole Seismic Source for Continuous Crosswell Monitoring Lawrence Berkeley National Laboratory Contact LBL About This Technology (a) Peizotube source, as deployed...

472

ERP SOURCE ESTIMATION BY INTEGRATION OF ANATOMICAL AND  

E-Print Network [OSTI]

ERP SOURCE ESTIMATION BY INTEGRATION OF ANATOMICAL AND DYNAMICAL CONSTRAINTS Thesis submitted a small EEG signal analysis project under his supervision, in which I applied blind source separation

473

Aerosol Composition and Source Apportionment in the Mexico City...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Aerosol Composition and Source Apportionment in the Mexico City Metropolitan Area with PIXEPESASTIM and Multivariate Analysis. Aerosol Composition and Source Apportionment in the...

474

Hybrid Ground Source System Analysis and Tool Development | Department...  

Broader source: Energy.gov (indexed) [DOE]

Hybrid Ground Source System Analysis and Tool Development Hybrid Ground Source System Analysis and Tool Development Project objectives: 1. Compile filtered hourly data for three...

475

Convergent Bayesian formulations of blind source separation and electromagnetic source estimation  

E-Print Network [OSTI]

We consider two areas of research that have been developing in parallel over the last decade: blind source separation (BSS) and electromagnetic source estimation (ESE). BSS deals with the recovery of source signals when only mixtures of signals can be obtained from an array of detectors and the only prior knowledge consists of some information about the nature of the source signals. On the other hand, ESE utilizes knowledge of the electromagnetic forward problem to assign source signals to their respective generators, while information about the signals themselves is typically ignored. We demonstrate that these two techniques can be derived from the same starting point using the Bayesian formalism. This suggests a means by which new algorithms can be developed that utilize as much relevant information as possible. We also briefly mention some preliminary work that supports the value of integrating information used by these two techniques and review the kinds of information that may be useful in addressing the...

Knuth, Kevin H

2015-01-01T23:59:59.000Z

476

GEOLOGY, August 2007 683Geology, August 2007; v. 35; no. 8; p. 683686; doi: 10.1130/G23675A.1; 4 figures; Data Repository item 2007176. 2007 The Geological Society of America. For permission to copy, contact Copyright Permissions, GSA, or editing@geosoci  

E-Print Network [OSTI]

GEOLOGY, August 2007 683Geology, August 2007; v. 35; no. 8; p. 683≠686; doi: 10.1130/G23675A.1; 4 figures; Data Repository item 2007176. © 2007 The Geological Society of America. For permission to copy

Demouchy, Sylvie

477

Cyclotron-based neutron source for BNCT  

SciTech Connect (OSTI)

Kyoto University Research Reactor Institute (KURRI) and Sumitomo Heavy Industries, Ltd. (SHI) have developed a cyclotron-based neutron source for Boron Neutron Capture Therapy (BNCT). It was installed at KURRI in Osaka prefecture. The neutron source consists of a proton cyclotron named HM-30, a beam transport system and an irradiation and treatment system. In the cyclotron, H- ions are accelerated and extracted as 30 MeV proton beams of 1 mA. The proton beams is transported to the neutron production target made by a beryllium plate. Emitted neutrons are moderated by lead, iron, aluminum and calcium fluoride. The aperture diameter of neutron collimator is in the range from 100 mm to 250 mm. The peak neutron flux in the water phantom is 1.8 Multiplication-Sign 109 neutrons/cm{sup 2}/sec at 20 mm from the surface at 1 mA proton beam. The neutron source have been stably operated for 3 years with 30 kW proton beam. Various pre-clinical tests including animal tests have been done by using the cyclotron-based neutron source with {sup 10}B-p-Borono-phenylalanine. Clinical trials of malignant brain tumors will be started in this year.

Mitsumoto, T.; Yajima, S.; Tsutsui, H.; Ogasawara, T.; Fujita, K. [Sumitomo Heavy Industries, Ltd (Japan); Tanaka, H.; Sakurai, Y.; Maruhashi, A. [Kyoto University Research Reactor Institute (Japan)

2013-04-19T23:59:59.000Z

478

X-ray source populations in galaxies  

E-Print Network [OSTI]

Today's sensitive, high-resolution X-ray observations allow the study of populations of X-ray sources, in the luminosity range of Galactic X-ray binaries, in galaxies as distant as 20-30 Mpc. The traditional astronomical tools of photometric diagrams and luminosity functions are now applied to these populations, providing a direct probe of the evolved binary component of different stellar populations. The study of the X-ray populations of E and S0 galaxies has revamped the debate on the formation and evolution of low-mass X-ray binaries (LMXBs) and on the role of globular clusters in these processes. While overall stellar mass drives the amount of X-ray binaries in old stellar populations, the amount of sources in star forming galaxies is related to the star formation rate. Short-lived, luminous, high-mass binaries (HMXBs) dominate these young populations. The most luminous sources in these systems are the debated ULXs, which have been suggested to be ~100-1000 Msol black holes, but could alternatively include a number of binaries with stellar mass black holes. Very soft sources have also been discovered in many galaxies and their nature is currently being debated. Observations of the deep X-ray sky, and comparison with deep optical surveys, are providing the first evidence of the X-ray evolution of galaxies.

G. Fabbiano

2005-11-16T23:59:59.000Z

479

Ultrabright Backward-wave Biphoton Source  

E-Print Network [OSTI]

We calculate the properties of a biphoton source based on resonant backward-wave spontaneous parametric down-conversion. We show that the biphotons are generated in a single longitudinal mode having a subnatural linewidth and a Glauber correlation time exceeding 65 ns.

Chih-Sung Chuu; S. E. Harris

2011-05-01T23:59:59.000Z

480

FINITE-EXTENT K-2 KINEMATIC SOURCE  

E-Print Network [OSTI]

FINITE-EXTENT K-2 KINEMATIC SOURCE MODELLING: THE 1999 ATHENS EARTHQUAKE STRONG. Direct S-waves are presumably dominant in the wave field, so these waves only are taken into account the strongest (S-wave) phase. In spite of many simplifying assumptions, namely omitting the site effects

Cerveny, Vlastislav

Note: This page contains sample records for the topic "figure sources 1972-1975" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Advanced RF power sources for linacs  

SciTech Connect (OSTI)

In order to maintain a reasonable over-all length at high center-of-mass energy, the main linac of an electron-positron linear collider must operate at a high accelerating gradient. For copper (non-superconducting) accelerator structures, this implies a high peak power per unit length and a high peak power per RF source, assuming a limited number of discrete sources are used. To provide this power, a number of devices are currently under active development or conceptual consideration: conventional klystrons with multi-cavity output structures, gyroklystrons, magnicons, sheet-beam klystrons, multiple-beam klystrons and amplifiers based on the FEL principle. To enhance the peak power produced by an rf source, the SLED rf pulse compression scheme is currently in use on existing linacs, and new compression methods that produce a flatter output pulse are being considered for future linear colliders. This paper covers the present status and future outlook for the more important rf power sources and pulse compression systems. It should be noted that high gradient electron linacs have applications in addition to high-energy linear colliders; they can, for example, serve as compact injectors for FEL`s and storage rings.

Wilson, P.B.

1996-10-01T23:59:59.000Z

482

groundwater nitrogen source identification and remediation  

E-Print Network [OSTI]

producer profits. This will, in turn, benefit water bodies in the area that receive stream baseflow fromgroundwater nitrogen source identification and remediation The Seymour Aquifer is a shallow aquifer water withdraws are used for irrigation while the cities of Vernon, Burk- burnett and Electra and many

483

Radiation Sources External Beam and Isotopes  

E-Print Network [OSTI]

Radiation Sources External Beam and Isotopes J. Daniel Bourland, PhD Professor Department of Radiation Oncology Departments of Physics and Biomedical Engineering Wake Forest School of Medicine Winston Radiation · Photons: electromagnetic radiation, no mass, E = h · X rays: origins are from atomic energy

484

Coordinating and Motivating open source contributors  

E-Print Network [OSTI]

Coordinating and Motivating open source contributors Workshop @ LinuxWorldAsia James Howison School Science at University of New South Wales 4th year of my PhD at Syracuse University Prof. Crowston Interviews, surveys and studies of development archives ApacheCon, O'Reilly OSCon, FOOCamp, OSDC

Crowston, Kevin

485

Energy Sources Used for Fusion Welding  

E-Print Network [OSTI]

) Energy Sources Used for Fusion Welding Thomas W. Eagar, Massachusetts Institute of Technology WELDING AND JOINING processes are es- sential for the development of virtually every manufactured product this situation. First, welding and joining are multifaceted, both in terms of process variations (such as fas

Eagar, Thomas W.

486

Arnold Schwarzenegger DATA SOURCES FOR CLIMATE CHANGE  

E-Print Network [OSTI]

Arnold Schwarzenegger Governor DATA SOURCES FOR CLIMATE CHANGE RESEARCH WITH A COMPUTABLE GENERAL-Holst, University of California, Berkeley PIERPROJECTREPORT June 2007 CEC-500-2006-080 #12;California Climate Change for Climate Change Research with a Computable General Equilibrium (CGE) Model of the California Economy

487

Source: University of California -San Diego  

E-Print Network [OSTI]

Source: University of California - San Diego Date: January 8, 2007 More on: , , , , , Brain Injury Brain Tumor Heart Disease Nervous System Neuroscience Psychology Research Bottleneck In Blood Supply Makes Brain Vulnerable To Strokes A team of UC San Diego physicists and neuroscientists has discovered

Kleinfeld, David

488

Hydrologically Sensitive Areas: Variable Source Area Hydrology  

E-Print Network [OSTI]

Hydrologically Sensitive Areas: Variable Source Area Hydrology Implications for Water Quality Risk hydrology was developed and applied to the New York City (NYC) water supply watersheds. According and are therefore hydrologically sensitive with respect to their potential to transport contaminants to perennial

Walter, M.Todd

489

A polarized positron source for CEBAF  

E-Print Network [OSTI]

A compact polarized positron source for Jefferson Lab is discussed. This scheme relies upon a high polarization (85%), high current (1 mA), low-energy (CEBAF-like injector with positron polarization ~60% and nano-Ampere intensity. An experiment to test this scheme is outlined.

Dumas, J; Voutier, E

2009-01-01T23:59:59.000Z

490

Self-Sustaining Open Source Software  

E-Print Network [OSTI]

Self-Sustaining Open Source Software Development Peter Gutmann University of Auckland Dot-coms Spare-time project · Sourceforge: Graveyard of abandonware/gedanken projects Self-sustaining = self-sustaining · MySQL, Berkeley DB, OpenBSD C = abandonware, splintered into factions, gedanken

Gutmann, Peter

491

Light Sources on the Nylon Vessels' Surfaces  

E-Print Network [OSTI]

the buffer thickness between the vessels could enhance -ray background in the corresponding region inside;Chapter 7: Light Sources on the Nylon Vessels' Surfaces 185 or laser). The illuminated spots can be seen the fiber's end to penetrate through the vessel membrane into the scintillator volume. A laser of a specific

492

Windows Enterprise Design Master Directory Sources  

E-Print Network [OSTI]

Windows Enterprise Design Master Directory Sources April 2, 2014 Active Directory information be to use a Microsoft "Outlook" email client to query Active Directory for someone with a certain "last name in Windows Active Directory. It is important the information correctly reflects your current name

Mayfield, John

493

Brookhaven National Laboratory National Synchrotron Light Source  

E-Print Network [OSTI]

Brookhaven National Laboratory National Synchrotron Light Source Number: Revision: LS-ESH-0027 06 copy of this file is the one on-line in the NSLS ESH website. Before using a printed copy, verify that it is the most current version by checking the document issue date on the NSLS ESH website. BROOKHAVEN NATIONAL

Ohta, Shigemi

494

Science and Technology of Future Light Sources  

E-Print Network [OSTI]

Science and Technology of Future Light Sources A White Paper Report prepared by scientists from ANL Berkeley, CA 94720 SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Editors. This work was supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U

Knowles, David William

495

Secondary electron ion source neutron generator  

DOE Patents [OSTI]

A neutron generator employing an electron emitter, an ion source bombarded by the electrons from the electron emitter, a plasma containment zone, and a target situated between the plasma containment zone and the electron emitter is disclosed. The target contains occluded deuterium, tritium, or a mixture thereof. 4 figs.

Brainard, J.P.; McCollister, D.R.

1998-04-28T23:59:59.000Z

496

NRC Construction Light Source Flicker: What We  

E-Print Network [OSTI]

NRC Construction Light Source Flicker: What We Need to Know, and Why You Should Care NRC Construction Jennifer A. Veitch, Ph.D. (c) 2013, National Research Council Canada #12;NRC Construction Handbook: Reference & Application (9th Ed.), 2000, p. 3-20 #12;NRC Construction Flicker Effects 1

California at Davis, University of

497

Secondary electron ion source neutron generator  

DOE Patents [OSTI]

A neutron generator employing an electron emitter, an ion source bombarded by the electrons from the electron emitter, a plasma containment zone, and a target situated between the plasma containment zone and the electron emitter. The target contains occluded deuterium, tritium, or a mixture thereof

Brainard, John P. (Albuquerque, NM); McCollister, Daryl R. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

498

2, 12871315, 2002 Aerosol sources and  

E-Print Network [OSTI]

in climate variability and climate change studies (IPCC, 2001). Radiative forcing of natural and their contribution to the chemical composition of aerosols in the Eastern Mediterranean Sea during summertime J aerosol sources in the Eastern Mediterranean5 Basin could be investigated at this location since the site

Paris-Sud XI, Université de

499

Catalog of supersoft X-ray sources  

E-Print Network [OSTI]

This catalog comprises an up-to-date (December 1999) list of luminous (>10^36 erg/s), binary supersoft X-ray sources. This electronic version (including the accompannying Web-pages) supersedes the printed version of Greiner (1996).

J. Greiner

2000-05-11T23:59:59.000Z

500

Open Source Software: Management, Diffusion and Competition  

E-Print Network [OSTI]

and competitive environment such as the ICT market. 1 Introduction OSS is an alternative model of software has introduced an innovative model of software development, based on self-organized communitiesOpen Source Software: Management, Diffusion and Competition Spyridoula Lakkaé National

Kouroupetroglou, Georgios