Powered by Deep Web Technologies
Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Characterization of Magnetic Fields from Power Distribution Transformers  

Science Conference Proceedings (OSTI)

This report describes a measurement study that was performed to characterize magnetic fields from power distribution transformers. The purpose of the study was to evaluate magnetic field attenuation rates of various sizes of transformers.

2009-09-25T23:59:59.000Z

2

3D MAGNETOTELLURIC CHARACTERIZATION OF THE COSO GEOTHERMAL FIELD | Open  

Open Energy Info (EERE)

CHARACTERIZATION OF THE COSO GEOTHERMAL FIELD CHARACTERIZATION OF THE COSO GEOTHERMAL FIELD Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: 3D Magnetotelluric characterization of the COSO Geothermal Field Details Activities (0) Areas (0) Regions (0) Abstract: Knowledge of the subsurface electrical resistivity/conductivity can contribute to a better understanding of complex hydrothermal systems, typified by Coso geothermal field, through mapping the geometry (bounds and controlling structures) over existing production. Three-dimensional magnetotelluric (MT) inversion is now an emerging technology for characterizing the resistivity structures of complex geothermal systems. The method appears to hold great promise, but histories exploiting truly 3D inversion that demonstrate the advantages that can be gained by acquiring

3

Gas characterization system 241-AN-105 field acceptance test procedure  

DOE Green Energy (OSTI)

This document details the field Acceptance Testing of a gas characterization system being installed on waste tank 241-AN-105. The gas characterization systems will be used to monitor the vapor spaces of waste tanks known to contain measurable concentrations of flammable gases.

Schneider, T.C.

1996-03-01T23:59:59.000Z

4

Gas characterization system 241-AW-101 field acceptance test procedure  

DOE Green Energy (OSTI)

This document details the field Acceptance Testing of a gas characterization system being installed on waste tank 241-AW-101. The gas characterization systems will be used to monitor the vapor spaces of waste tanks known to contain measurable concentrations of flammable gases.

Schneider, T.C.

1996-03-01T23:59:59.000Z

5

Characterizing Structural Controls of Geothermal Fields in the Northwestern  

Open Energy Info (EERE)

Characterizing Structural Controls of Geothermal Fields in the Northwestern Characterizing Structural Controls of Geothermal Fields in the Northwestern Great Basin- A Progress Report Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Characterizing Structural Controls of Geothermal Fields in the Northwestern Great Basin- A Progress Report Abstract Considering a lack of recent volcanism, the abundant geothermal activity in the northwestern Great Basin is somewhat anomalous. The prolific activity may result from enhanced dilation on N- to NNE-striking normal faults induced by a transfer of NW-directed dextral shear from the Walker Lane to NW-directed extension in the Great Basin. Although faults control most geothermal activity in the Great Basin, few detailed investigations have been conducted on the specific structural controls of individual fields.

6

3D Magnetotelluic characterization of the Coso Geothermal Field | Open  

Open Energy Info (EERE)

Magnetotelluic characterization of the Coso Geothermal Field Magnetotelluic characterization of the Coso Geothermal Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: 3D Magnetotelluic characterization of the Coso Geothermal Field Details Activities (1) Areas (1) Regions (0) Abstract: Electrical resistivity may contribute to progress in understanding geothermal systems by imaging the geometry, bounds and controlling structures in existing production, and thereby perhaps suggesting new areas for field expansion. To these ends, a dense grid of magnetotelluric (MT) stations plus a single line of contiguous bipole array profiling has been acquired over the east flank of the Coso geothermal system. Acquiring good quality MT data in producing geothermal systems is a challenge due to production related electromagnetic (EM) noise and, in the

7

1994 Fernald field characterization demonstration program data report  

Science Conference Proceedings (OSTI)

The 1994 Fernald field characterization demonstration program, hosted by Fernald Environmental Management Project, was established to investigate technologies that are applicable to the characterization and remediation of soils contaminated with uranium. An important part of this effort was evaluating field-screening tools potentially capable of acquiring high-resolution information on uranium contamination distribution in surface soils. Further-more, the information needed to be obtained in a cost- and time-efficient manner. Seven advanced field-screening technologies were demonstrated at a uranium-contaminated site at Fernald, located 29 kilometers northwest of Cincinnati, Ohio. The seven technologies tested were: (1) alpha-track detectors, (2) a high-energy beta scintillometer, (3) electret ionization chambers, (4) and (5) two variants of gamma-ray spectrometry, (6) laser ablation-inductively coupled plasma-atomic emission spectroscopy, and (7) long-range alpha detection. The goals of this field demonstration were to evaluate the capabilities of the detectors and to demonstrate their utility within the US Department of Energy`s Environmental Restoration Program. Identical field studies were conducted using four industry-standard characterization tools: (1) a sodium-iodide scintillometer, (2) a low-energy FIDLER scintillometer, (3) a field-portable x-ray fluorescence detector, and (4) standard soil sampling coupled with laboratory analysis. Another important aspect of this program was the application of a cost/risk decision model to guide characterization of the site. This document is a compilation of raw data submitted by the technologies and converted total uranium data from the 1994 Fernald field characterization demonstration.

Rautman, C.A. [Sandia National Labs., Albuquerque, NM (United States); Cromer, M.V. [Spectra Research Inst., Albuquerque, NM (United States); Newman, G.C. [GRAM, Inc., Albuquerque, NM (United States); Beiso, D.A. [Los Alamos Technical Associates, Inc., NM (United States)

1995-12-01T23:59:59.000Z

8

Integrated reservoir characterization for the Mazari oil field, Pakistan  

E-Print Network (OSTI)

This thesis describes a field study performed on the Mazari oil field located in Sind province, Pakistan. We used an integrated reservoir characterization technique to incorporate the geological, petrophysical, and reservoir performance data to interpret historical reservoir performance, to assess and refine reservoir management activities, and to make plans for future reservoir developments. We used a modified approach to characterize within the mappable geological facies. Our approach is based on the Kozeny-Carmen equation and uses the concept of mean hydraulic radius. As part of our objective to characterize the reservoir, we tabulated reservoir characteristics for each hydraulic flow unit, and we presented estimates of in-place reserves. We evaluated reservoir performance potential using the production history, well tests and cased-hole well log surveys. Suggestions for reservoir management activities in conjunction with the evaluation of the reservoir performance are discussed in detail. Finally, we give recommendations for activities in reservoir development particularly infill drilling considerations and secondary recovery efforts.

Ashraf, Ejaz

1994-01-01T23:59:59.000Z

9

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10, 2010 10, 2010 CX-001057: Categorical Exclusion Determination Characterizing Fractures in Geyser's Geothermal Field by Micro-Seismic Data, Using Soft Computing, Fractals, and Shear Wave Anisotropy CX(s) Applied: A9 Date: 03/10/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 9, 2010 CX-001093: Categorical Exclusion Determination Finite Volume Based Computer Program for Ground Source Heat Pump System CX(s) Applied: A9 Date: 03/09/2010 Location(s): Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 9, 2010 CX-001061: Categorical Exclusion Determination Geothermal Academy: Focus Center for Data Collection, Analysis and Dissemination CX(s) Applied: A9, A11 Date: 03/09/2010 Location(s): Colorado

10

Characterization of Roabiba Sandstones Reservoir in Bintuni Field, Papua, Indonesia  

E-Print Network (OSTI)

Bintuni Field has two Middle Jurassic gas reservoirs, Upper and Lower Roabiba Sandstone reservoirs, with the estimated reserve from eight appraisal drilled wells of 6.08 tcf. The field has not been producing commercially. The main gas reservoir is the Upper Roabiba Sandstone. It was deposited in a tidal-dominated shoreface delta and consists of a moderately sorted, fine to medium grain, quartzarenite with average porosity of 12% and average permeability of 250 md. Lower Roabiba Sandstone was deposited in estuarine channel and marsh and consists of lower fine to lower coarse grained quartzarenites with average porosity of 12% and permeability 215 md. This study is considered necessary since the field is considered to be a giant field and there are a limited number of studies on the Roabiba Sandstones reservoir specifically in Bintuni Field that have been published. The purpose of this study was to develop geological and petrophysical analysis that will identify reservoir quality and distribution of best, intermediate, and poor reservoir zones by characterizing distribution of porosity-permeability values in lithofacies and mercury injection capillary pressure. The methods to characterize the reservoir included core-based lithofacies determination, well logs analysis, and mercury injection capillary pressure analysis. As a result from core descriptions, three main units of lithofacies could be identified. Lithofacies massive sandstones (ms), slightly bioturbated sandstones (sb1), and crosslaminated sandstones (xls) have the highest average permeability (>100 md) and porosity (>10%). Petrophysical properties from core data show that porosity varies only slightly regardless of lithofacies characteristic whereas permeability variations are greater and correspond closely with the lithofacies. When grouped according to the dominant pore throat dimension, distinct collections or grouping of rocks and their associated lithofacies were observed. Winland plot was engaged to do clustering of rock types since Winland R35 pore port sizes represent "cut off values" for good and bad flow unit quality. The analyses of porositypermeability plots were confirmed with the Winland plot that the best reservoir rock (rock type 1) consists of lithofacies ms, xls, and sb1. From this development, four petrophysical rock types were defined and characterized. Rock type 1 (the best reservoir rock) consists of lithofacies ms, xls, and sb1. Therefore, associated lithofacies in rock type 1 may be used as a pore-proxy rock property for the determination of best reservoir rock and corresponding flow units at the reservoir scale.

Vera, Riene

2009-12-01T23:59:59.000Z

11

3D Magnetotelluric characterization of the COSO GeothermalField  

DOE Green Energy (OSTI)

Knowledge of the subsurface electrical resistivity/conductivity can contribute to a better understanding of complex hydrothermal systems, typified by Coso geothermal field, through mapping the geometry (bounds and controlling structures) over existing production. Three-dimensional magnetotelluric (MT) inversion is now an emerging technology for characterizing the resistivity structures of complex geothermal systems. The method appears to hold great promise, but histories exploiting truly 3D inversion that demonstrate the advantages that can be gained by acquiring and analyzing MT data in three dimensions are still few in number. This project will address said issue, by applying 3D MT forward modeling and inversion to a MT data set acquired over the Coso geothermal field. The goal of the project is to provide the capability to image large geothermal reservoirs in a single self-consistent model. Initial analysis of the Coso MT data has been carried out using 2D MT imaging technology to construct an initial 3D resistivity model from a series of 2D resistivity images obtained using the inline electric field measurements (Zxy impedance elements) along different measurement transects. This model will be subsequently refined through a 3D inversion process. The initial 3D resistivity model clearly shows the controlling geological structures possibly influencing well production at Coso. The field data however, also show clear three dimensionality below 1 Hz, demonstrating the limitations of 2D resistivity imaging. The 3D MT predicted data arising from this starting model show good correspondence in dominant components of the impedance tensor (Zxy and Zyx) above 1Hz. Below 1 Hz there is significant differences between the field data and the 2D model data.

Newman, Gregory A.; Hoversten, Michael; Gasperikova, Erika; Wannamaker, Philip E.

2005-01-01T23:59:59.000Z

12

Crosshole EM for oil field characterization and EOR monitoring: Field examples  

SciTech Connect

Crosshole and surface-to-borehole electromagnetic (EM) imaging is applied to reservoir characterization and steam flood monitoring in a central California oil field. Steam was injected into three stacked, eastward-dipping, unconsolidated oil sands within the upper 200 in. The steam plume is expected to develop as an ellipse aligned with the regional northwest-southeast strike. EM measurements were made from two flberglass-cased observation wells straddling the steam injector on a northeast-southwest profile. Field data were collected before the initiation of a steam drive to map the distribution of the oil sands and then six months after the steam was injected to monitor the progress of the steam chest. Resisitivity images derived from the EM data collected before steam injection clearly delineate the distribution and dipping structure on the target oil sands. Difference images from data collected before and after steam flooding indicate that the steam chest has developed only in the deeper oil sands, and it has preferentially migrated eastward. Surface-to-borehole measurements were useful in mapping the distribution of the major oil sands, but they were insensitive to resisitivity changes in the early stages of the steam flood.

Wilt, M.; Schenkel, C. [Lawrence Livermore National Lab., CA (United States); Torres-Verdin, C. [Schlumberger-Doll Research Center, Ridgefield, CT (United States); Lee, Ki Ha [Lawrence Berkeley Lab., CA (United States); Tseng, Hung-Wen [California Univ., Berkeley, CA (United States)

1994-09-01T23:59:59.000Z

13

Crosshole EM for oil field characterization and EOR monitoring: Field examples from Lost Hills, California  

SciTech Connect

A steamflood recently initiated by Mobil Development and Production U.S. at the Lost Hills No 3 oil field in California is notable for its shallow depth and the application of electromagnetic (EM) geophysical techniques to monitor the subsurface steam flow. Steam was injected into three stacked eastward-dipping unconsolidated oil sands at depths from 60 to 120 m; the plume is expected to develop as an ellipsoid aligned with the regional northwest-southeast strike. Because of the shallow depth of the sands and the high viscosity of the heavy oil, it is important to track the steam in the unconsolidated sediments for both economic and safety reasons. Crosshole and surface-to-borehole electromagnetic imaging were applied for reservoir characterization and steamflood monitoring. The crosshole EM data were collected to map the interwell distribution of the high-resistivity oil sands and to track the injected steam and hot water. Measurements were made in two fiberglass-cased observation wells straddling the steam injector on a northeast-southwest profile. Field data were collected before the steam drive, to map the distribution of the oil sands, and then 6 and 10 months after steam was injected, to monitor the expansion of the steam chest. Resistivity images derived from the collected data clearly delineated the distribution and dipping structure of the target oil sands. Difference images from data collected before and during steamflooding indicate that the steam chest has developed only in the middle and lower oil sands, and it has preferentially migrated westward in the middle oil sand and eastward in the deeper sand. Surface-to-borehole field data sets at Lost Hills were responsive to the large-scale subsurface structure but insufficiently sensitive to model steam chest development in the middle and lower oil sands. As the steam chest develops further, these data will be of more use for process monitoring.

Wilt, M.; Schenkel, C.; Wratcher, M.; Lambert, I.; Torres-Verdin, C.; Tseng H.W.

1996-07-16T23:59:59.000Z

14

ARM - Field Campaign - Characterization of Black Carbon Mixing State  

NLE Websites -- All DOE Office Websites (Extended Search)

govCampaignsCharacterization of Black Carbon Mixing State govCampaignsCharacterization of Black Carbon Mixing State Related Campaigns Characterization of Black Carbon Mixing State - II 2014.02.15, Sedlacek, OSC Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : Characterization of Black Carbon Mixing State 2012.11.01 - 2013.06.14 Lead Scientist : Arthur Sedlacek For data sets, see below. Description The objective of the proposed experiments was to characterize the mixing state of black carbon produced in biomass burning using the single particle soot photometer (SP2). The large uncertainty associated with black carbon (BC) direct forcing is due, in part, to the dependence of light absorption of BC-containing particles on the position of the BC aggregate within the particle. It is

15

3D Magnetotelluric characterization of the COSO Geothermal Field  

E-Print Network (OSTI)

model of the Coso geothermal field has been constructed. TheResistivity model of the Coso geothermal site compiled fromthe Department of Energy, Geothermal Program Office. MT data

Newman, Gregory A.; Hoversten, Michael; Gasperikova, Erika; Wannamaker, Philip E.

2005-01-01T23:59:59.000Z

16

3D Magnetotelluic characterization of the Coso Geothermal Field  

E-Print Network (OSTI)

130, 475-496. the Coso Geothermal Field, Proc.28 th Workshop on Geothermal Reservoir Engineering, Stanfords ratio and porosity at Coso geothermal area, California: J.

Newman, Gregory A.; Hoversten, G. Michael; Wannamaker, Philip E.; Gasperikova, Erika

2008-01-01T23:59:59.000Z

17

Characterization of Field Leachates at Coal Combustion Product Management Sites  

Science Conference Proceedings (OSTI)

A large amount of laboratory-generated leachate data has been produced over the last two decades to estimatecoal combustion product (CCP) leachate concentrations, and a variety of leaching methods have been used. No one method, however, has been shown to accurately represent field leaching conditions. In fact, little work has been performed to systematically evaluate field-generated leachates representative of a range of coal types, combustion systems, and management methods, and only limited work has be...

2006-12-14T23:59:59.000Z

18

Barchan dune corridors: field characterization and investigation of control parameters  

E-Print Network (OSTI)

The structure of the barchan field located between Tarfaya and Laayoune (Atlantic Sahara, Morocco) is quantitatively investigated and compared to that in La Pampa de la Joya (Arequipa, Peru). On the basis of field measurements, we show how the volume, the velocity and the output sand flux of a dune can be computed from the value of its body and horn widths. The dune size distribution is obtained from the analysis of aerial photographs. It shows that these fields are in a statistically homogeneous state along the wind direction and present a `corridor' structure in the transverse direction, in which the dunes have a rather well selected size. Investigating the possible external parameters controlling these corridors, we demonstrate that none among topography, granulometry, wind and sand flux is relevant. We finally discuss the dynamical processes at work in these fields (collisions and wind fluctuations), and investigate the way they could regulate the size of the dunes. Furthermore we show that the overall sand flux transported by a dune field is smaller than the maximum transport that could be reached in the absence of dunes, i.e. in saltation over the solid ground.

Hicham Elbelrhiti; Bruno Andreotti; Philippe Claudin

2006-09-06T23:59:59.000Z

19

Development and characterization of a diverging cusped field thruster and a lanthanum hexaboride hollow cathode  

E-Print Network (OSTI)

A low power, magnetically confined plasma thruster has been developed and undergone preliminary characterization. The design employs cusped magnetic fields arranged in a divergent fashion to confine electron flow to an ...

Courtney, Daniel George

2008-01-01T23:59:59.000Z

20

Characterization of Field Exposed Thin Film Modules: Preprint  

DOE Green Energy (OSTI)

Test arrays of thin film modules have been deployed at the Solar Energy Centre near New Delhi, India since 2002-2003. Performances of these arrays were reported by O.S. Sastry [1]. This paper reports on NREL efforts to support SEC by performing detailed characterization of selected modules from the array. Modules were selected to demonstrate both average and worst case power loss over the 8 years of outdoor exposure. The modules characterized included CdTe, CIS and three different types of a-Si. All but one of the a-Si types were glass-glass construction. None of the modules had edge seals. Detailed results of these tests are presented along with our conclusions about the causes of the power loss for each technology.

Wohlgemuth, J. H.; Sastry, O. S.; Stokes, A.; Singh, Y. K.; Kumar, M.

2012-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Categorical Exclusion Determinations: Golden Field Office | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Golden Field Office April 20, 2010 CX-001720: Categorical Exclusion Determination Job Creation and Petroleum Independence through Ethanol-85 (E85) in Texas CX(s) Applied:...

22

Characterization of the Dundee formation, Winterfield Field, Clare County, Michigan  

Science Conference Proceedings (OSTI)

The Devonian Dundee Formation of the Winterfield field was originally developed in the late 1930`s and early 1940`s and rapid production helped support the U.S. war effort. Poor completion and production practices may have caused the field to have been inefficiently developed, and wells prematurely watered out due to water coning. Production occurs in porous dolomitized {open_quotes}chimneys{close_quotes} where they extend above the oil-water contact within the otherwise {open_quotes}tight{close_quotes} limestone. Cross plots of the PEF (Photoelectric) log and the LLD (deep lateral) log separate the porous, oil-saturated dolomite from water-saturated dolomites and the {open_quotes}tight{close_quotes} limestone. The PEF distinguishes the lithologies (dolomite and limestone) and the LLD separates the fluids (water and oil); other useful logs are the CNL and GR to indicate porous and shale zones respectively. The dolomite {open_quotes}chimneys{close_quotes} are small in scale, less than 60` high and can be laterally discontinuous between wells on 40 acres spacing. The dolomite zones tend to have good porosity and permeability; the API gravity of the oil is 44.2 and the reservoir is produced by a strong, constant water drive. Initial production tests on some wells indicate the ability to produce up to nearly 2000 barrels per day (BOPD). Wells drilled in the 1980`s to the deeper Richfield intercepted and isolated oil pocket in the Dundee off structure, prompting further drilling activity; subsequent production has significantly added to the cumulative production in the field. Due to the heterogeneity of the reservoir, the strong water drive, the low density of the oil and the relatively high permeabilities, the reservoir and others like it are ideal candidates for horizontal drain technology. The horizontal wells could link {open_quotes}chimney`s{close_quotes} that have previously been untapped, significantly adding to the total production of these Dundee fields.

Chittick, S.; Salotti, C.; Wood, J.R. [and others

1995-09-01T23:59:59.000Z

23

3D Magnetotelluic characterization of the Coso GeothermalField  

Science Conference Proceedings (OSTI)

Electrical resistivity may contribute to progress inunderstanding geothermal systems by imaging the geometry, bounds andcontrolling structures in existing production, and thereby perhapssuggesting new areas for field expansion. To these ends, a dense grid ofmagnetotelluric (MT) stations plus a single line of contiguous bipolearray profiling has been acquired over the east flank of the Cosogeothermal system. Acquiring good quality MT data in producing geothermalsystems is a challenge due to production related electromagnetic (EM)noise and, in the case of Coso, due to proximity of a regional DCintertie power transmission line. To achieve good results, a remotereference completely outside the influence of the dominant source of EMnoise must be established. Experimental results so far indicate thatemplacing a reference site in Amargosa Valley, NV, 65 miles from the DCintertie, isstill insufficient for noise cancellation much of the time.Even though the DC line EM fields are planar at this distance, theyremain coherent with the nonplanar fields in the Coso area hence remotereferencing produces incorrect responses. We have successfully unwrappedand applied MT times series from the permanent observatory at Parkfield,CA, and these appear adequate to suppress the interference of thecultural EM noise. The efficacy of this observatory is confirmed bycomparison to stations taken using an ultra-distant reference site eastof Socorro, NM. Operation of the latter reference was successful by usingfast ftp internet communication between Coso Junction and the New MexicoInstitute of Mining and Technology, using the University of Utah site asintermediary, and allowed referencing within a few hours of datadownloading at Coso. A grid of 102 MT stations was acquired over the Cosogeothermal area in 2003 and an additional 23 stations were acquired toaugment coverage in the southern flank of the first survey area in 2005.These data have been inverted to a fully three-dimensional conductivitymodel. Initial analysis of the Coso MT data was carried out using 2D MTimaging. An initial 3D conductivity model was constructed from a seriesof 2D resistivity images obtained using the inline electric fieldmeasurements (Zyx impedance elements) along several measurementtransects. This model was then refined through a 3D inversion process.This model shows the controlling geological structures possiblyinfluencing well production at Coso and correlations with mapped surfacefeatures such as faults and regional geoelectric strike. The 3D modelalso illustrates the refinement in positioning of conductivity contactswhen compared to isolated 2D inversion transects. The conductivity modelhas also been correlated with microearthquake locations, well fluidproduction intervals and most importantly with an acoustic and shearvelocity model derived by Wu and Lees (1999). This later correlationshows the near-vertical high conductivity structure on the eastern flankof the producing field is also a zone of increased acoustic velocity andincreased Vp/Vs ratio bounded by mapped fault traces. South of theDevil's Kitchen is an area of high geothermal well density, where highlyconductive near surface material is interpreted as a clay cap alterationzone manifested from the subsurface geothermal fluids and relatedgeochemistry. Beneath the clay cap, however, the conductivity isnondescript, whereas the Vp/Vs ratio is enhanced over the productionintervals. It is recommended that more MT data sites be acquired to thesouthwest of the Devil's Kitchen area to better refine the conductivitymodel in that area.

Newman, Gregory A.; Hoversten, G. Michael; Wannamaker, Philip E.; Gasperikova, Erika

2007-04-23T23:59:59.000Z

24

Characterizing Fractures in Geysers Geothermal Field by Micro-seismic Data,  

Open Energy Info (EERE)

Characterizing Fractures in Geysers Geothermal Field by Micro-seismic Data, Characterizing Fractures in Geysers Geothermal Field by Micro-seismic Data, Using Soft Computing, Fractals, and Shear Wave Anisotropy Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Characterizing Fractures in Geysers Geothermal Field by Micro-seismic Data, Using Soft Computing, Fractals, and Shear Wave Anisotropy Project Type / Topic 1 Recovery Act: Enhanced Geothermal Systems Component Research and Development/Analysis Project Type / Topic 2 Fracture Characterization Technologies Project Description The proposed program will focus on predicting characteristics of fractures and their orientation prior to drilling new wells. It will also focus on determining the location of the fractures, spacing and orientation during drilling, as well as characterizing open fractures after stimulation to help identify the location of fluid flow pathway within the EGS reservoir. These systems are created by passively injecting cold water, and stimulating the permeation of the injected water through existing fractures into hot wet and hot dry rocks by thermo-elastic cooling shrinkage. The stimulated, existing fractures thus enhance the permeability of the hot rock formations, hence enabling better circulation of water for the purpose of producing the geothermal resource. The main focus of the project will be on developing better understanding of the mechanisms for the stimulation of existing fractures, and to use the information for better exploitation of the high temperature geothermal resources located in the northwest portion of the Geysers field and similar fields.

25

Magnetic field characterization of electrical appliances as point sources through in situ measurements  

SciTech Connect

It is shown that magnetic field exposure from a point source can be studied by characterizing the source with a magnetic dipole. A technique based on in situ measurements of amplitude and phase angle of three orthogonal components of the magnetic field at three points at different distances from the source was developed. The method to determine the center and the real and imaginary components of the dipole moment along the three aces is described. The characterization of the source allows the prediction of the field at any distance and along any direction from the source. The effects of background fields and of the source dimensions and complexity on the accuracy of the results are discussed.

Zaffanella, L.E.; Sullivan, T.P. [Enertech Consultants, Lee, MA (United States); Visintainer, I. [CESI, Milan (Italy)

1997-01-01T23:59:59.000Z

26

Performance characterization and optimization of a diverging cusped field thruster with a calibrated counter-weighted millinewton thrust stand  

E-Print Network (OSTI)

The previously developed Diverging Cusped Field Thruster (DCFT) has undergone further investigations and performance characterization. The DCFT is a magnetically conned plasma thruster that uses cusped magnetic fields to ...

Daspit, Ryan M

2012-01-01T23:59:59.000Z

27

Geologic and Engineering Characterization of East Ford Field, Reeves County, Texas  

SciTech Connect

The objective of this Class III project is to demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost-effective way to recover a higher percentage of the original oil in place through geologically based field development. The project focused on reservoir characterization of the East Ford unit, a representative Delaware Mountain Group field that produces from the upper Bell Canyon Formation (Ramsey Sandstone). The field, discovered in 1960, is operated by Oral Petco, Inc., as the East Ford unit: it contained an estimated 18.4 million barrels (MMbbl) of original oil in place.

Dutton, Shirley P.; Flanders, William A.; Guzman, Jose I.; Zirczy, Helena

1999-08-16T23:59:59.000Z

28

Increasing Waterflood Reserves in the Wilmington Oil Field Through Reservoir Characterization and Reservoir Management  

SciTech Connect

This project is intended to increase recoverable waterflood reserves in slope and basin reservoirs through improved reservoir characterization and reservoir management. The particular application of this project is in portions of Fault Blocks IV and V of the Wilmington Oil Field, in Long Beach, California, but the approach is widely applicable in slope and basin reservoirs. Transferring technology so that it can be applied in other sections of the Wilmington Field and by operators in other slope and basin reservoirs is a primary component of the project.

Chris Phillips; Dan Moos; Don Clarke; John Nguyen; Kwasi Tagbor; Roy Koerner; Scott Walker

1997-04-10T23:59:59.000Z

29

Characterization of field emission from carbon nanofibers on a metal tip  

SciTech Connect

Field electron emission from carbon nanofibers (CNFs) grown on a tungsten tip has been characterized by measuring emission current-voltage (I-V) curves and observing emission patterns on a phosphor screen. CNFs were vertically grown on the tip by plasma-enhanced chemical vapor deposition. Field emission from the CNFs over 100 {mu}A was strongly dependent on emitter-anode distance, and the dominant field electrons were emitted within an angular spread of {delta}{theta}{approx}25 deg., indicating the electron emission took place mainly from the emitter's apex area. By analyzing the I-V curves with the aid of the Fowler-Nordheim theory, the maximum current density was estimated to be about J=2x10{sup 9} A/m{sup 2}.

Sakai, Y.; Tone, D.; Nagatsu, S.; Endo, T.; Kita, S.; Okuyama, F. [Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan)

2009-08-17T23:59:59.000Z

30

Integrated Reservoir Characterization and Simulation Studies in Stripper Oil and Gas Fields  

E-Print Network (OSTI)

The demand for oil and gas is increasing yearly, whereas proven oil and gas reserves are being depleted. The potential of stripper oil and gas fields to supplement the national energy supply is large. In 2006, stripper wells accounted for 15% and 8% of US oil and gas production, respectively. With increasing energy demand and current high oil and gas prices, integrated reservoir studies, secondary and tertiary recovery methods, and infill drilling are becoming more common as operators strive to increase recovery from stripper oil and gas fields. The primary objective of this research was to support optimized production of oil and gas from stripper well fields by evaluating one stripper gas field and one stripper oil field. For the stripper gas field, I integrated geologic and engineering data to build a detailed reservoir characterization model of the Second White Specks (SSPK) reservoir in Garden Plains field, Alberta, Canada. The objectives of this model were to provide insights to controls on gas production and to validate a simulation-based method of infill drilling assessment. SSPK was subdivided into Units A ? D using well-log facies. Units A and B are the main producing units. Unit A has better reservoir quality and lateral continuity than Unit B. Gas production is related primarily to porosity-netthickness product and permeability and secondarily to structural position, minor structural features, and initial reservoir pressure. For the stripper oil field, I evaluated the Green River formation in the Wells Draw area of Monument Butte field, Utah, to determine interwell connectivity and to assess optimal recovery strategies. A 3D geostatistical model was built, and geological realizations were ranked using production history matching with streamline simulation. Interwell connectivity was demonstrated for only major sands and it increases as well spacing decreases. Overall connectivity is low for the 22 reservoir zones in the study area. A water-flood-only strategy provides more oil recovery than a primary-then-waterflood strategy over the life of the field. For new development areas, water flooding or converting producers to injectors should start within 6 months of initial production. Infill drilling may effectively produce unswept oil and double oil recovery. CO2 injection is much more efficient than N2 and CH4 injection. Water-alternating-CO2 injection is superior to continuous CO2 injection in oil recovery. The results of this study can be used to optimize production from Garden Plains and Monument Butte fields. Moreover, these results should be applicable to similar stripper gas and oil field fields. Together, the two studies demonstrate the utility of integrated reservoir studies (from geology to engineering) for improving oil and gas recovery.

Wang, Jianwei

2008-12-01T23:59:59.000Z

31

Reservoir Characterization and Modeling of the Glorieta and the Clearfork Formations, Monahans Field, Permian Basin, Texas  

E-Print Network (OSTI)

Monahans Field of the Permian Basin in West Texas is a complex carbonate reservoir due to the lateral heterogeneity caused by facies changes throughout the Lower Guadalupian Glorieta Formation and the Upper Leonardian Upper Clearfork Formation. A facies model, porosity model, and a siltstone model were generated in Petrel to better characterize the Monahans Field reservoir. Interbedded impermeable siltstone beds in Monahans Field partition the reservoir making oil production and water injection difficult. The facies model indicates that during deposition, a tectonically uplifted area (island) influenced sedimentation and also shows that the Upper Clearfork Formation is mainly subtidal facies and the Glorieta Formation consists mainly of tidal flat facies. The porosity model shows the greatest porosity to be in the diagenetically altered supratidal deposits. The siltstone model identified siltstone barriers that prograded across the platform when sea level was low. 4th-order sequences occur within the larger 3rd-order sequence. The models identified multiple flow units in Monahans Field. Preferential injection of water within the reservoir compartments, horizontal drilling, and hydraulic fracture stimulation may all provide mechanisms to more efficiently sweep the remaining reserves from the reservoir.

Yeatman, Ryan Yeatman

2011-08-01T23:59:59.000Z

32

INCREASING WATERFLOOD RESERVES IN THE WILMINGTON OIL FIELD THROUGH IMPROVED RESERVOIR CHARACTERIZATION AND RESERVOIR MANAGEMENT  

Science Conference Proceedings (OSTI)

This project increased recoverable waterflood reserves in slope and basin reservoirs through improved reservoir characterization and reservoir management. The particular application of this project is in portions of Fault Blocks IV and V of the Wilmington Oil Field, in Long Beach, California, but the approach is widely applicable in slope and basin reservoirs. Transferring technology so that it can be applied in other sections of the Wilmington Field and by operators in other slope and basin reservoirs is a primary component of the project. This project used advanced reservoir characterization tools, including the pulsed acoustic cased-hole logging tool, geologic three-dimensional (3-D) modeling software, and commercially available reservoir management software to identify sands with remaining high oil saturation following waterflood. Production from the identified high oil saturated sands was stimulated by recompleting existing production and injection wells in these sands using conventional means as well as a short radius redrill candidate. Although these reservoirs have been waterflooded over 40 years, researchers have found areas of remaining oil saturation. Areas such as the top sand in the Upper Terminal Zone Fault Block V, the western fault slivers of Upper Terminal Zone Fault Block V, the bottom sands of the Tar Zone Fault Block V, and the eastern edge of Fault Block IV in both the Upper Terminal and Lower Terminal Zones all show significant remaining oil saturation. Each area of interest was uncovered emphasizing a different type of reservoir characterization technique or practice. This was not the original strategy but was necessitated by the different levels of progress in each of the project activities.

Scott Walker; Chris Phillips; Roy Koerner; Don Clarke; Dan Moos; Kwasi Tagbor

2002-02-28T23:59:59.000Z

33

Cost results from the 1994 Fernald characterization field demonstration for uranium-contaminated soils  

Science Conference Proceedings (OSTI)

One of the principal objectives of the US Department of Energy (DOE) Office of Technology Development is to develop an optimum integrated system of technologies for removing uranium substances from soil. This system of technologies, through demonstration, must be proven in terms of cost reduction, waste minimization, risk reduction, and user applicability. To evaluate the effectiveness of these technologies, a field demonstration was conducted at the Fernald site in the summer of 1994. Fernald was selected as the host site for the demonstration based on environmental problems stemming from past production of uranium metal for defense-related applications. The following six alternative technologies were developed and/or demonstrated by the principal investigators in the Characterization Task Group at the field demonstration: (1) beta scintillation detector by Pacific Northwest Laboratory (PNL), (2) in situ gamma detector by PNL, (3) mobile laser ablation-inductively coupled plasma/atomic emission spectrometry (LA-ICP/AES) laboratory by Ames Laboratory, (4) long-range alpha detector (LRAD) by Los Alamos National Laboratory (LANL), (5) passive radon monitoring by ORNL, and (6) electret ion chamber by ORNL.

Douthat, D.M.; Stewart, R.N.; Armstrong, A.Q.

1995-04-01T23:59:59.000Z

34

Three-dimensional characterization of near-field transducers by electron tomography  

SciTech Connect

Transmission electron microscopy (TEM) was employed to study the structure of near-field transducers (NFT) for applications in heat-assisted magnetic recording (HAMR) heads. The overall shape of NFTs that had passed or failed an optical test was similar, as determined by scanning transmission electron microscopy tomography. However, the absence of a well-defined peg and the presence of a flat top on the 'FAIL' NFT disk induced poor thermal heat transfer from the NFT to the phase change medium and resulted in the optical test failure. The thermal heating around the NFT led to Ta diffusion from the adjacent tantala core and to the presence of Ta-rich particles in the alumina matrix in the plane of the NFT. - Highlights: Black-Right-Pointing-Pointer Very site specific TEM specimen prepared by dual-beam SEM/FIB system. Black-Right-Pointing-Pointer Near field transducer characterization by STEM tomography. Black-Right-Pointing-Pointer Elemental analysis in 2D by STEM-EDX.

Liu, Yuzi, E-mail: yuziliu@anl.gov [Materials Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States) [Materials Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Center for Nanoscale Materials, Argonne National Laboratory, Argonne IL, 60439 (United States); Schreiber, Daniel K. [Materials Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States) [Materials Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208 (United States); Petford-Long, Amanda K. [Materials Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States) [Materials Science Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Center for Nanoscale Materials, Argonne National Laboratory, Argonne IL, 60439 (United States); Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208 (United States); Gao, Kai-Zhong [Head and Media R and D, Seagate Technology, Bloomington, MN 55435 (United States)] [Head and Media R and D, Seagate Technology, Bloomington, MN 55435 (United States)

2012-10-15T23:59:59.000Z

35

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III  

SciTech Connect

The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. It was hoped that the successful application of these technologies would result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs.

City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

2002-09-30T23:59:59.000Z

36

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III  

SciTech Connect

The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies would result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs.

City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

2002-09-30T23:59:59.000Z

37

Reservoir characterization of Yates Formation (Permian, Guadalupian), South Ward field, Ward County, Texas  

E-Print Network (OSTI)

The Yates Formation is a prominent hydrocarbon producing unit in the Permian Basin of west Texas. Production is predominantly from very fine grained sandstones and siltstones that are interbedded with carbonates. The producing clastics have northwest-southeast trend in west Texas and roughly an east-west trend in New Mexico. The present work focuses on the Yates reservoirs of South Ward field in west Texas. The main objective of this thesis is to examine the clastic reservoirs at pore scale, facies scale and at field scale. Yates facies include: (1) fine grained yellowish well sorted sandstones with poor cementation; (2) very fine grained, gray, moderately sorted and ripple laminated sandstone; (2a) very fine grained, gray, bioturbated and massive sandstone; (3) very fine grained and silty, reddish silty sandstone, laminated and typically anhydrite cemented; (4) silty to very fine grained, gray with displacive anhydrite nodular cement; (5) siltstone, dark gray to black, compact and laminated, with pyrite and salt pits; (6) dolostones with predominantly mudstones and wackestones. Sandstones are sub-arkosic and differ in matrix and cement composition. Depositional environments of the clastics facies vary from shallow marine to continental, eolian and fluvial. Carbonates are restricted subtidal to supratidal shelf deposits. The facies-dependent reservoir rocks were ranked by reservoir quality from the highest (o = 20-30%; k = 100-250md) to the lowest (o = < 4% to; k = characterized by a particular 0 vs k relationship observed through alinear regression model. Average capillary displacement pressures calculated for the elastic facies 1 and 2 are 12psia and 43psia respectively. These are classed as "good reservoirs"; the same for facies 3 is 148psia, which is classed as "seal facies". Facies 4 through 6 are also fluid barriers. At a field scale, the Yates Formation is divided into two High Frequency Sequences (HFSS) separated by a prominent erosional unconformity. The lower HFS is made up of 10 parasequences; the upper HFS is made up of 7 parasequences. Each parasequence represents an "upward drying" cycle that starts with a "wettest" facies and ends with "driest" facies. The HFSs start with a lower Trangressive Systems Tract (TST) and end with an upper Highstand Systems Tract (HST). There is evidence of Incised Valley Fills (IVFS) at the bases of the TSTS. The Yates is a composite sequence, that was deposited during a sea level fall of 3 rd order scale. Internal cyclicity in the Yates Formation is the result of superimposition of 4 Ih and 5 th eustatic cycles on the 3 rd eustatic cycle. A constant, low subsidence rate was assumed for the entire shelf, during the deposition of Yates Formation.

Dronamraju, Sharma

1997-01-01T23:59:59.000Z

38

RESERVOIR CHARACTERIZATION OF UPPER DEVONIAN GORDON SANDSTONE, JACKSONBURG STRINGTOWN OIL FIELD, NORTHWESTERN WEST VIRGINIA  

SciTech Connect

The Jacksonburg-Stringtown oil field contained an estimated 88,500,000 barrels of oil in place, of which approximately 20,000,000 barrels were produced during primary recovery operations. A gas injection project, initiated in 1934, and a pilot waterflood, begun in 1981, yielded additional production from limited portions of the field. The pilot was successful enough to warrant development of a full-scale waterflood in 1990, involving approximately 8,900 acres in three units, with a target of 1,500 barrels of oil per acre recovery. Historical patterns of drilling and development within the field suggests that the Gordon reservoir is heterogeneous, and that detailed reservoir characterization is necessary for understanding well performance and addressing problems observed by the operators. The purpose of this work is to establish relationships among permeability, geophysical and other data by integrating geologic, geophysical and engineering data into an interdisciplinary quantification of reservoir heterogeneity as it relates to production. Conventional stratigraphic correlation and core description shows that the Gordon sandstone is composed of three parasequences, formed along the Late Devonian shoreline of the Appalachian Basin. The parasequences comprise five lithofacies, of which one includes reservoir sandstones. Pay sandstones were found to have permeabilities in core ranging from 10 to 200 mD, whereas non-pay sandstones have permeabilities ranging from below the level of instrumental detection to 5 mD; Conglomeratic zones could take on the permeability characteristics of enclosing materials, or could exhibit extremely low values in pay sandstone and high values in non-pay or low permeability pay sandstone. Four electrofacies based on a linear combination of density and scaled gamma ray best matched correlations made independently based on visual comparison of geophysical logs. Electrofacies 4 with relatively high permeability (mean value > 45 mD) was determined to be equivalent to the pay sandstone within the Gordon reservoir. Three-dimensional models of the electrofacies in the pilot waterflood showed that electrofacies 4 is present throughout this area, and the other electrofacies are more disconnected. A three-layer, back-propagation artificial neural network with three slabs in the middle layer can be used to predict permeability and porosity from gamma ray and bulk density logs, the first and the second derivatives of the log data with respect to depth, well location, and log baselines. Two flow units were defined based on the stratigraphic model and geophysical logs. A three-dimensional reservoir model including the flow units, values of permeability calculated through the artificial neural network and injection pressure-rate information were then used as inputs for a reservoir simulator to predict oil production performance for the center producers in the pilot area. This description of the reservoir provided significantly better simulation results than earlier results obtained using simple reservoir models. Bulk density and gamma ray logs were used to identify flow units throughout the field. As predicted by the stratigraphic analysis, one of the flow units crosses stratigraphic units in the reservoir. A neural network was used to predict permeability values for each flow unit in producer and injection wells. The reservoir simulator was utilized to predict the performance of two flood patterns located to the north of the pilot area. Considering the simple model utilized for simulation, the results are in very good agreement with the field history.

S. Ameri; K. Aminian; K.L. Avary; H.I. Bilgesu; M.E. Hohn; R.R. McDowell; D.L. Matchen

2001-07-01T23:59:59.000Z

39

Identification and characterization of Hydraulic Flow Units in the San Juan Formation, Orocual Field, Venezuela  

E-Print Network (OSTI)

This thesis focuses on the integration of core and well log data in order to provide a petrophysical characterization of the Hydraulic Flow Units (HFU) in the San Juan Formation, Orocual Field, Venezuela. We used three separate approaches to correlate/ integrate these data from Orocual Field. The first method uses the concept of Hydraulic Flow Units (HFU). The second method uses non-parametric transformation and regression, and the third method estimates permeability using polynomial and power law-type functions. We provide a comparison of these methods - and we believe that the HFU and non-parametric regression techniques give the most representative results. In this study we have core data for four wells and well log data for sixteen wells. The core permeability data were adjusted (in this work) to compensate for the Klinkenberg effect (a low pressure gas flow phenomena) and to relate porosity and permeability from laboratory to in-situ (net overburden stress) conditions. To model the stress correction we use the original reservoir pressure of 7470 psia and a two-point stress model. For well logs, we use a quality control method based on depth shift, depth match, environmental corrections, and core-log correlation. Finally, core permeability data were correlated to multiple well log suites (density, neutron, gamma ray, and resistivity). The HFU concept provides a deterministic approach for combining the geological attributes with available petrophysical data to delineate the reservoir into "units" of similar fluid flow characteristics. The HFU method does not presume a relationship between variables. The non-parametric regression/transform technique is based on using variable transformations to generate relationship between dependent and independent variables. This iterative, non-parametric procedure is called the Alternating Conditional Expectation (or ACE) method. Additional deterministic models based on polynomial, power law, and modified power law relations are also used to estimate permeability. The methodologies demonstrated in this work can be applied to any reservoir system having a significant population of permeability measurements and well log data.

Deghirmandjian, Odilia

2001-01-01T23:59:59.000Z

40

Increasing Waterflooding Reservoirs in the Wilmington Oil Field through Improved Reservoir Characterization and Reservoir Management, Class III  

SciTech Connect

This project was intended to increase recoverable waterflood reserves in slope and basin reservoirs through improved reservoir characterization and reservoir management. The particular application of this project is in portions of Fault Blocks IV and V of the Wilmington Oil Field, in Long Beach, California, but the approach is widely applicable in slope and basin reservoirs, transferring technology so that it can be applied in other sections of the Wilmington field and by operators in other slope and basin reservoirs is a primary component of the project.

Koerner, Roy; Clarke, Don; Walker, Scott; Phillips, Chris; Nguyen, John; Moos, Dan; Tagbor, Kwasi

2001-08-07T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ALKALINE-SURFACTANT-POLYMER FLOODING AND RESERVOIR CHARACTERIZATION OF THE BRIDGEPORT AND CYPRESS RESERVOIRS OF THE LAWRENCE FIELD  

Science Conference Proceedings (OSTI)

Feasibility of alkaline-surfactant-polymer flood for the Lawrence Field in Lawrence County, Illinois is being studied. Two injected formulations are being designed; one for the Bridgeport A and Bridgeport B reservoirs and one for Cypress and Paint Creek reservoirs. Fluid-fluid and coreflood evaluations have developed a chemical solution that produces incremental oil in the laboratory from the Cypress and Paint Creek reservoirs. A chemical formulation for the Bridgeport A and Bridgeport B reservoirs is being developed. A reservoir characterization study is being done on the Bridgeport A, B, & D sandstones, and on the Cypress sandstone. The study covers the pilot flood area and the Lawrence Field.

Malcolm Pitts; Ron Damm; Bev Seyler

2003-03-01T23:59:59.000Z

42

ALKALINE-SURFACTANT-POLYMER FLOODING AND RESERVOIR CHARACTERIZATION OF THE BRIDGEPORT AND CYPRESS RESERVOIRS OF THE LAWRENCE FIELD  

Science Conference Proceedings (OSTI)

Feasibility of alkaline-surfactant-polymer flood for the Lawrence Field in Lawrence County, Illinois is being studied. Two injected formulations are being designed; one for the Bridgeport A and Bridgeport B reservoirs and one for Cypress and Paint Creek reservoirs. Fluid-fluid and coreflood evaluations have developed a chemical solution that produces incremental oil in the laboratory from the Cypress and Paint Creek reservoirs. A chemical formulation for the Bridgeport A and Bridgeport B reservoirs is being developed. A reservoir characterization study is being done on the Bridgeport A, B, & D sandstones, and on the Cypress sandstone. The study covers the pilot flood area and the Lawrence Field.

Malcolm Pitts; Ron Damm; Bev Seyler

2003-04-01T23:59:59.000Z

43

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 25, 2012 June 25, 2012 CX-008559: Categorical Exclusion Determination New Hampshire Formula Grant for State Energy Program CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): New Hampshire Offices(s): Golden Field Office June 25, 2012 CX-008543: Categorical Exclusion Determination Colorado State Energy Plan 2012 CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): Colorado Offices(s): Golden Field Office June 25, 2012 CX-008538: Categorical Exclusion Determination Program Year 2012 State Energy Program Formula Grant CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): Arizona Offices(s): Golden Field Office June 25, 2012 CX-008552: Categorical Exclusion Determination Massachusetts State Energy Programs CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): Massachusetts Offices(s): Golden Field Office

44

PISCES Water Characterization Field Study: Volume I: Site D Report; Volume II: Site D Appendix  

Science Conference Proceedings (OSTI)

In 1988, EPRI initiated the Power Plant Integrated System-Chemical Emissions Study (PISCES) project to characterize the distribution of trace substances in air, liquid, and solid waste streams from fossil-fuel-fired electric utility power plants. Studies have been completed at PISCES Sites A, B, and C. The results for PISCES Site D are presented in this report, which provides a comprehensive characterization of wastewater at a coal-fired power plant.

1998-11-18T23:59:59.000Z

45

PISCES Water Characterization Field Study: Volume I: Site D Report; Volume II: Site D Appendix  

Science Conference Proceedings (OSTI)

In 1988, EPRI initiated the Power Plant Integrated System-Chemical Emissions Study (PISCES) project to characterize the distribution of trace substances in air, liquid, and solid waste streams from fossil-fuel-fired electric utility power plants. Studies have been completed at PISCES Sites A, B, and C. The results for PISCES Site D are presented in this report, which provides a comprehensive characterization of wastewater at a coal-fired power plant.

1998-11-12T23:59:59.000Z

46

Reservoir characterization of the Upper and Lower Repetto reservoirs of the Santa Clara field-federal waters, offshore California  

E-Print Network (OSTI)

This thesis presents the characterization of the Upper and Lower Repetto reservoirs of the Santa Clara field, which lies seven miles offshore of Ventura County, California. The approaches that we adopted for this reservoir characterization are based on the analysis of field production data. These reservoir characterization approaches include: The application of the Fetkovich/McCray decline type curve to estimate original oil-in-place, drainage area, flow capacity, and a skin factor for each well. This approach requires converting the field production data for each well to dimensionless decline flowrate, dimensionless rate integral, and dimensionless rate integral-derivative functions. These functions are then simultaneously plotted against dimensionless decline time so that a unique match of these plots can be obtained using the Fetkovich/McCray decline type curve (in this research, data conversion and type curve matching are performed using a software package). The analysis of plots of reciprocal production rate versus material balance time to estimate "movable" or recoverable oil reserves. This new material balance approach is used in conjunction with a semi-analytical method of graphical analysis (pressure drop normalized rate versus cumulative oil production), which also provides estimates of recoverable oil reserves. Together, these plotting techniques provide good estimates of the estimated ultimate recovery for each well. Our approaches for the analysis of field production data allow us to provide recovery factors for each well (using our estimates of original oil-in-place and estimated ultimate recovery). Furthermore, we were able to generate maps of original oil-in-place, estimated ultimate recovery, flow capacity, and permeability for both the Upper and Lower Repetto reservoirs.

Roco, Craig Emmitt

2000-01-01T23:59:59.000Z

47

Waveguide-based ultrasonic and far-field electromagnetic sensors for downhole reservoir characterization.  

DOE Green Energy (OSTI)

This report summarizes the first year research and development effort leading to development of high-temperature sensors for enhanced geothermal systems. It covers evaluation of ultrasonic and electromagnetic (EM) techniques applied to temperature measurement and flow characterization. On temperature measurement, we have evaluated both microwave radiometry and ultrasonic techniques for temperature gradient and profile measurements. Different antenna designs are evaluated and array loop antenna design is selected for further development. We have also evaluated ultrasonic techniques for total flow characterization, which includes using speed of sound to determine flow temperature, measuring acoustic impedance to estimate fluid density, and using cross-correlation technique to determine the mass flow rate. Method to estimate the flow enthalpy is briefly discussed. At end, the need and proposed techniques to characterize the porosity and permeability of a hot dry rock resource are presented.

Sheen, S. H.; Chien, H. T.; Wang, K.; Liao, S.; Gopalsami, N.; Bakhtiari, S.; Raptis, A. C.; Nuclear Engineering Division

2010-11-12T23:59:59.000Z

48

Characterization of the flow field response to vaneless space reduction in centrifugal compressors  

E-Print Network (OSTI)

The unsteady three-dimensional flow field for two centrifugal compressors of nearly identical design (one with a marginally smaller impeller-diffuser gap) is interrogated to assess the difference in the time averaged ...

Villanueva V., Alfonso D. (Villanueva Villarreal)

2006-01-01T23:59:59.000Z

49

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies will result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs.

Scott Hara

2001-06-27T23:59:59.000Z

50

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

14, 2011 14, 2011 CX-007422: Categorical Exclusion Determination Module-Integrated Power Converters Based on Universal Dock CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Texas Offices(s): Golden Field Office December 14, 2011 CX-007413: Categorical Exclusion Determination Transforming Photovoltaic Installations Toward Discpatchable, Schedulable Energy Solutions CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Oregon Offices(s): Golden Field Office December 13, 2011 CX-007418: Categorical Exclusion Determination Sidewalks to School CX(s) Applied: B1.13 Date: 12/13/2011 Location(s): South Carolina Offices(s): Golden Field Office December 13, 2011 CX-007426: Categorical Exclusion Determination Sharyland Independent School District CX(s) Applied: B5.16 Date: 12/13/2011

51

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

27, 2012 27, 2012 CX-007862: Categorical Exclusion Determination Northeast Photovoltaic Regional Training Provider CX(s) Applied: A9, A11, B3.14 Date: 01/27/2012 Location(s): Connecticut Offices(s): Golden Field Office January 27, 2012 CX-007861: Categorical Exclusion Determination SunShot New England · Open for Business CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Connecticut Offices(s): Golden Field Office January 27, 2012 CX-007860: Categorical Exclusion Determination Team Vanguard (Northern California) - Streamlining and Standardizing Permitting, Interconnection CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): California Offices(s): Golden Field Office January 27, 2012 CX-007859: Categorical Exclusion Determination Developing Solar Friendly Communities CX(s) Applied: A9, A11

52

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 6, 2012 September 6, 2012 CX-009147: Categorical Exclusion Determination Delaware State Energy Program Formula Grant Application CX(s) Applied: A9, A11 Date: 09/06/2012 Location(s): Delaware Offices(s): Golden Field Office September 6, 2012 CX-009138: Categorical Exclusion Determination American Samoa Government State Energy Program· Annual Grant CX(s) Applied: A9, A11 Date: 09/06/2012 Location(s): American Samoa Offices(s): Golden Field Office September 6, 2012 CX-009163: Categorical Exclusion Determination Ohio State Energy Program Year 2012 Formula Grants CX(s) Applied: A9, A11 Date: 09/06/2012 Location(s): Ohio Offices(s): Golden Field Office September 6, 2012 CX-009159: Categorical Exclusion Determination Montana Formaul State Energy Program CX(s) Applied: A9, A11 Date: 09/06/2012

53

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

27, 2011 27, 2011 CX-007536: Categorical Exclusion Determination Tucson Public Building Solar Arrays CX(s) Applied: A9, B5.16 Date: 12/27/2011 Location(s): Arizona Offices(s): Golden Field Office December 27, 2011 CX-007570: Categorical Exclusion Determination EL-11-002 East Marshall High School Geothermal Project CX(s) Applied: B5.19, B2.1 Date: 12/27/2011 Location(s): Iowa Offices(s): Golden Field Office December 21, 2011 CX-007417: Categorical Exclusion Determination Shift CX(s) Applied: B5.1 Date: 12/21/2011 Location(s): Pennsylvania Offices(s): Golden Field Office December 21, 2011 CX-007409: Categorical Exclusion Determination Silica Polymer Initiator Conformance Gel Applications in Geothermal Zonal Isolation CX(s) Applied: A9, B3.6 Date: 12/21/2011 Location(s): Oklahoma

54

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

27, 2012 27, 2012 CX-008982: Categorical Exclusion Determination "Sacrificial Protective Coating Materials Regenerated In-Situ to Enable High Performance Membranes CX(s) Applied: A9, B3.6 Date: 08/27/2012 Location(s): California Offices(s): Golden Field Office" August 23, 2012 CX-009018: Categorical Exclusion Determination State Energy Program - Tennessee CX(s) Applied: A9, A11 Date: 08/23/2012 Location(s): Tennessee Offices(s): Golden Field Office August 22, 2012 CX-009013: Categorical Exclusion Determination Fiscal Year 2012-13 State Energy Program Formula Grant CX(s) Applied: A9, A11 Date: 08/22/2012 Location(s): Pennsylvania Offices(s): Golden Field Office August 22, 2012 CX-008979: Categorical Exclusion Determination Flexible Assembly Solar Technology CX(s) Applied: A9, B3.6, B5.17

55

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 28, 2012 September 28, 2012 CX-009152: Categorical Exclusion Determination Kansas State Energy Program CX(s) Applied: A9, A11 Date: 09/28/2012 Location(s): Kansas Offices(s): Golden Field Office September 26, 2012 CX-009434: Categorical Exclusion Determination Deployable Commercial Rooftop Solar Electric System CX(s) Applied: B5.15 Date: 09/26/2012 Location(s): New York Offices(s): Golden Field Office September 26, 2012 CX-009169: Categorical Exclusion Determination Virgin Islands State Energy Program CX(s) Applied: A9, A11 Date: 09/26/2012 Location(s): Virgin Islands Offices(s): Golden Field Office September 26, 2012 CX-009433: Categorical Exclusion Determination Center for Biomass Utilization Renewal of Grant CX(s) Applied: B3.6 Date: 09/26/2012 Location(s): North Dakota, Minnesota

56

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 14, 2013 February 14, 2013 CX-010234: Categorical Exclusion Determination Alternate Spacing Heating Systems Residential Cold Climate Heat Pump CX(s) Applied: A9, B1.31, B3.6, B5.1 Date: 02/14/2013 Location(s): Missouri Offices(s): Golden Field Office February 14, 2013 CX-010230: Categorical Exclusion Determination Miniaturized Air to Refrigerant Heat Exchangers CX(s) Applied: A9, B3.6 Date: 02/14/2013 Location(s): Maryland Offices(s): Golden Field Office February 14, 2013 CX-010218: Categorical Exclusion Determination Sustainable Energy for Business Districts in China CX(s) Applied: A9, A11 Date: 02/14/2013 Location(s): California Offices(s): Golden Field Office February 13, 2013 CX-010236: Categorical Exclusion Determination U.S. Offshore Wind: Removing Market Barriers CX(s) Applied: A9

57

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 12, 2012 July 12, 2012 CX-008585: Categorical Exclusion Determination Solar TAC - Thermal Energy Storage Test Facility CX(s) Applied: A9, A11, B1.15, B3.6 Date: 07/12/2012 Location(s): Colorado Offices(s): Golden Field Office July 12, 2012 CX-008583: Categorical Exclusion Determination California State Energy Program Annual Formula CX(s) Applied: A9, A11 Date: 07/12/2012 Location(s): California Offices(s): Golden Field Office July 12, 2012 CX-008592: Categorical Exclusion Determination Hawaii State Energy Program Annual Formula CX(s) Applied: A9, A11 Date: 07/12/2012 Location(s): Hawaii Offices(s): Golden Field Office July 11, 2012 CX-008586: Categorical Exclusion Determination SkyFuel Baseload Parabolic Trough CX(s) Applied: B3.6, B5.15 Date: 07/11/2012 Location(s): Colorado

58

Characterization of gas condensate reservoirs using pressure transient and production data - Santa Barbara Field, Monagas, Venezuela  

E-Print Network (OSTI)

This thesis presents a field case history of the integrated analysis and interpretation developed using all of the available petrophysical, production, and well test data from the condensate zone of Block A, Santa Barbara Field (Monagas, Venezuela). The reservoir units in Santa Barbara Field present substantial structural and fluid complexity, which, in turn, presents broad challenges for assessment and optimization of well performance behavior. Approximately 60 well tests have been performed in the gas condensate sections within Santa Barbara Field, and the analysis and interpretation of this data suggests the existence of condensate banking and layered reservoir behavior, as well as "well interference" effects. We demonstrate and discuss analysis and interpretation techniques that can be utilized for wells that exhibit condensate banking, layered reservoir behavior, and well interference effects (where all of these phenomena are observed in the well performance data taken from Block A in Santa Barbara Field). We have established that the layered reservoir model (no crossflow), coupled with the model for a two-zone radial composite reservoir, is an appropriate reservoir model for the analysis and interpretation of well performance data (i.e., well test and production data) taken from wells in Santa Barbara Field. It is of particular importance to note our success in using the "well interference" approach to analyze and interpret well test data taken from several wells in Santa Barbara Field. While it is premature to make broad conclusions, it can be noted that well interference effects (interference between production wells) could be (and probably is) a major influence on the production performance of Santa Barbara Field. In addition, our well test analysis approach corroborates the use of the Correa and Ramey (variable rate) plotting function for the analysis of drillstem test (DST) data. In summary, we are able to use our integrated analysis developed for Block A (Santa Barbara Field) estimate areal distributions of "flow" properties (porosity, effective permeability, and skin factor), as well as "volumetric" properties (original gas-in-place, gas reserves, and reservoir drainage area (all on a "per-well" basis)).

Medina Tarrazzi, Trina Mercedes

2003-01-01T23:59:59.000Z

59

Optimal utilization of field generated analytical data for site characterization and remedial decision making. Master's thesis  

Science Conference Proceedings (OSTI)

This study developed data quality standards for assessing environmental analytical data quality and its use in remedial decision making, specifically in risk assessment calculations. The primary purpose was to increase the use of field generated data in environmental site investigations versus the continued reliance on costly and time consuming EPA Contract Lab Program data. Increased reliance on field lab data could significantly reduce remedial investigation costs. The standards developed are based on regulatory criteria for data useability, achievable quality in a CLP lab setting, and basic statistical methods. The standards were applied to sets of Volatile Organic Compound data in water and soil matrices from CLP generated data from one Installation Restoration Program site and field lab generated data from another site. The CLP data failed the test for data useability based on the standards as established where the field generated data performed much better but also had its specific failures. The results of the test of the standards on actual data sets indicate that the standards may be more stringent than necessary. Also seen in the results is a strong performance of field labs in generating data of acceptable quality.

Lester, R.J.

1994-09-01T23:59:59.000Z

60

Ultra-low field NMR for detection and characterization of 235 UF6  

SciTech Connect

We have demonstrated the first ultra-low field (ULF) nuclear magnetic resonance measurements of uranium hexafluoride (UF{sub 6}), both depleted and 70% enriched, which is used in the uranium enrichment process. A sensitive non-invasive detection system would have an important role in non-proliferation surveillance. A two-frequency technique was employed to remove the transients induced by rapidly switching off the 50 mT pre-polarization field. A mean transverse relaxation time T{sub 2} of 24 ms was estimated for the un-enriched UF{sub 6} sample measured at a mean temperature of 80 C. Nuclear magnetic resonance at ULF has several advantages including the ability to measure through metal, such as pipes, and simple magnetic field generation hardware. We present here recent data and discuss the potential for non-proliferation monitoring of enrichment and flow velocity.

Espy, Michelle A [Los Alamos National Laboratory; Magnelind, Per E [Los Alamos National Laboratory; Matlashov, Andrei N [Los Alamos National Laboratory; Urbaitis, Algis V [Los Alamos National Laboratory; Volegov, Petr L [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Increasing Waterflood Reserves in the Wilmington Oil Field through Improved Reservoir Characterization and Reservoir Management  

Science Conference Proceedings (OSTI)

This project used advanced reservoir characterization tools, including the pulsed acoustic cased-hole logging tool, geologic three-dimensional (3-D) modeling software, and commercially available reservoir management software to identify sands with remaining high oil saturation following waterflood. Production from the identified high oil saturated sands was stimulated by recompleting existing production and injection wells in these sands using conventional means as well as a short radius redrill candidate.

Clarke, D.; Koerner, R.; Moos D.; Nguyen, J.; Phillips, C.; Tagbor, K.; Walker, S.

1999-04-05T23:59:59.000Z

62

Spectral decomposition aids AVO analysis in reservoir characterization: A case study of Blackfoot field, Alberta, Canada  

Science Conference Proceedings (OSTI)

Blackfoot field, Alberta, Canada, has produced oil and gas from a Glauconitic compound incised valley-system. In this area channels can be filled with sands and/or shales. Differentiation of prospective channel sands and non-productive shales was always ... Keywords: Amplitude anomaly, Fluid, Lithology, Sand, Spectral decomposition

Wang Jung Yoon; Mohammed Farfour

2012-09-01T23:59:59.000Z

63

Characterization of high-power RF structures using time-domain field codes  

Science Conference Proceedings (OSTI)

We have modeled gyrotron windows and gyrotron amplifier sever structures for TE modes in the 100--150 GHz range and have computed the reflection and transmission characteristics from the field data. Good agreement with frequency domain codes and analytic analysis have been obtained for some simple geometries. We present results for realistic structures with lossy coatings and describe implementation of microwave diagnostics.

Shang, C.C.; DeFord, J.F.; Swatloski, T.L.

1992-08-21T23:59:59.000Z

64

A petrophysics and reservoir performance-based reservoir characterization of Womack Hill (Upper Smackover) Field (Alabama)  

E-Print Network (OSTI)

Womack Hill is one of the 57 Smackover fields throughout the Gulf Coast region. Since its discovery in 1970, Womack Hill Field has produced 30 million STB from the Upper Smackover sequence of carbonate reservoirs. Since production reached its peak in 1977, oil and gas rates have declined substantially. During the last ten years, the production decline has accelerated despite an increase in the water injection rate. This production decline along with the increase in the operating costs has caused a considerable drop in profitability of the field. The field currently produces 640 STB/D of oil and 330 MSCF/D of gas, along with 6,700 STB/D of water, which implies a water cut of over 90 percent. In order to optimize the reservoir management strategies for Womack Hill Field, we need to develop an integrated reservoir study. This thesis addresses the creation of an integrated reservoir study and specifically provides a detailed reservoir description that represents the high level of heterogeneity that exists within this field. Such levels of heterogeneity are characteristic of carbonate reservoirs. This research should serve as a guide for future work in reservoir simulation and can be used to evaluate various scenarios for additional development as well as to optimize the operating practices in the field. We used a non-parametric regression algorithm (ACE) to develop correlations between the core and well log data. These correlations allow us to estimate reservoir permeability at the "flow unit" scale. We note that our efforts to reach an overall correlation were unsuccessful. We generated distributions of porosity and permeability throughout the reservoir area using statistically derived estimates of porosity and permeability. The resulting reservoir description indicates a clear contrast in reservoir permeability between the western and eastern areas - and in particular, significant variability in the reservoir. We do note that we observed an essentially homogenous porosity distribution. We provided analysis of the production and injection data using various techniques (history plots, EUR plots, and decline type curve analysis) and we note this effort yielded a remaining recoverable oil of 1.9 MMSTB (under the current operating conditions). This analysis suggests a moderate flow separation between the western and eastern areas and raised some questions regarding the suitability of the hydraulic "jet pumps" (the water rate increased coincidentally with the installation of the jet pumps).

Avila Urbaneja, Juan Carlos

2002-01-01T23:59:59.000Z

65

Characterization of the reactive flow field dynamics in a gas turbine injector using high frequency PIV  

E-Print Network (OSTI)

The present work details the analysis of the aerodynamics of an experimental swirl stabilized burner representative of gas turbine combustors. This analysis is carried out using High Frequency PIV (HFPIV) measurements in a reactive situation. While this information is usually available at a rather low rate, temporally resolved PIV measurements are necessary to better understand highly turbulent swirled flows, which are unsteady by nature. Thanks to recent technical improvements, a PIV system working at 12 kHz has been developed to study this experimental combustor flow field. Statistical quantities of the burner are first obtained and analyzed, and the measurement quality is checked, then a temporal analysis of the velocity field is carried out, indicating that large coherent structures periodically appear in the combustion chamber. The frequency of these structures is very close to the quarter wave mode of the chamber, giving a possible explanation for combustion instability coupling.

Barbosa, Sverine; Ducruix, Sbastien

2008-01-01T23:59:59.000Z

66

Field Operations Program, Toyota PRIUS Hybrid Electric Vehicle Performance Characterization Report  

DOE Green Energy (OSTI)

The U.S. Department of Energys Field Operations Program evaluates advanced technology vehicles in real-world applications and environments. Advanced technology vehicles include pure electric, hybrid electric, hydrogen, and other vehicles that use emerging technologies such as fuel cells. Information generated by the Program is targeted to fleet managers and others considering the deployment of advanced technology vehicles. As part of the above activities, the Field Operations Program has initiated the testing of the Toyota Prius hybrid electric vehicle (HEV), a technology increasingly being considered for use in fleet applications. This report describes the Pomona Loop testing of the Prius, providing not only initial operational and performance information, but also a better understanding of HEV testing issues. The Pomona Loop testing includes both Urban and Freeway drive cycles, each conducted at four operating scenarios that mix minimum and maximum payloads with different auxiliary (e.g., lights, air conditioning) load levels.

Francfort, James Edward; Nguyen, N.; Phung, J.; Smith, J.; Wehrey, M.

2001-12-01T23:59:59.000Z

67

Increasing Heavy Oil Reserves in the Wilmington Oil Field through Advanced Reservoir Characterization and Thermal Production Technologies  

SciTech Connect

The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California. This is realized through the testing and application of advanced reservoir characterization and thermal production technologies. It is hoped that the successful application of these technologies will result in their implementation throughout the Wilmington Field and through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block (FB) II-A has been relatively insufficient because of several producability problems which are common in SBC reservoir; inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves.

City of Long Beach; David K.Davies and Associates; Tidelands Oil Production Company; University of Southern California

1999-06-25T23:59:59.000Z

68

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10, 2012 10, 2012 CX-008350: Categorical Exclusion Determination Re-work Bryan Mound 30" Crude Oil Pipeline Mainline Valves CX(s) Applied: B1.3 Date: 04/10/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office April 10, 2012 CX-008349: Categorical Exclusion Determination Replacement Anode Bed on West Hackberry 42-inch Crude Oil Pipeline at Gum Cove Road CX(s) Applied: B1.3 Date: 04/10/2012 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office March 28, 2012 CX-008351: Categorical Exclusion Determination Transport and Perform TD&I on Big Hill TX-29 Transformer CX(s) Applied: B1.3 Date: 03/28/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office February 23, 2012 CX-007816: Categorical Exclusion Determination

69

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 20, 2011 June 20, 2011 CX-006251: Categorical Exclusion Determination Big Hill Heat Exchanger Isolation Valves - Install CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Jefferson County, Texas Office(s): Strategic Petroleum Reserve Field Office June 20, 2011 CX-006250: Categorical Exclusion Determination Blast and Paint Bayou Choctaw Brine Pump Pad and Associate Piping CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Iberville Parish, Louisiana Office(s): Strategic Petroleum Reserve Field Office June 20, 2011 CX-006249: Categorical Exclusion Determination Blast and Paint West Hackberry Heat Exchanger Headers and Overhead Rack Piping CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Cameron Parish, Louisiana Office(s): Strategic Petroleum Reserve Field Office June 20, 2011

70

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

20, 2010 20, 2010 CX-001669: Categorical Exclusion Determination Install Fence Around Bryan Mound K-9 Training Area CX(s) Applied: B1.11 Date: 04/20/2010 Location(s): Freeport, Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office April 7, 2010 CX-001518: Categorical Exclusion Determination Re-seal Polyurethane Overcoat on BH Substation Relay Building 814 CX(s) Applied: B1.3 Date: 04/07/2010 Location(s): Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office March 16, 2010 CX-001227: Categorical Exclusion Determination Replacement of Big Hill Deep Anode Ground Bed Site for Cavern 114 CX(s) Applied: B1.3 Date: 03/16/2010 Location(s): Big Hill, Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office March 3, 2010 CX-001004: Categorical Exclusion Determination

71

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 31, 2012 October 31, 2012 CX-009509: Categorical Exclusion Determination Power Monitoring, Communication and Control Upgrade at Bryan Mound Degas Plant (Install) CX(s) Applied: B1.7 Date: 10/31/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office October 30, 2012 CX-009510: Categorical Exclusion Determination Strategic Petroleum Reserve Emergency Pipeline and Piping Repair, 2013-2017 CX(s) Applied: B5.4 Date: 10/30/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office October 2, 2012 CX-009216: Categorical Exclusion Determination ADAS System Life Cycle Support, 2012-2015 CX(s) Applied: B1.7 Date: 10/02/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office September 24, 2012 CX-009217: Categorical Exclusion Determination

72

Reservoir characterization helping to sustain oil production in Thailand's Sirikit Field  

SciTech Connect

Sirikit field is located in the Phitsanulok basin of Thailand's north-central plains. The main reservoir sequence is some 400 m thick and comprises thin interbedded fluvio-lacustrine clay and sandstones. Initial oil volumes after exploration and appraisal drilling in 1981-1984 were estimated at some 180 million bbl. However, further development/appraisal drilling and the following up of new opportunities allowed a better delineation of the reservoirs, resulting in an increased STOIIP and recovery. Total in-place oil volumes were increased to 791 million bbl and the expectation of ultimate recovery to 133 million bbl. To date, 131 wells have been drilled, 65 MMstb have been produced, and production stands at 23,000 bbl/day. Extensive reservoir studies were among the techniques and methods used to assess whether water injection would be a viable further development option. A reservoir geological model was set up through (1) core studies, (2) a detailed sand correlation, and (3) reservoir quality mapping. This model showed that despite considerable heterogeneity most sands are continuous. Reservoir simulation indicated that water injection is viable in the north-central part of the field and that it will increase the Sirikit field reserves by 12 million; this is now part of Thai Shell's reserves portfolio. Injection will start in 1994. New up-to-date seismic and mapping techniques (still) using the old 3-D seismic data acquired in 1983 are being used for further reservoir delineation. This work is expected to result in a further reserve increase.

Shaafsma, C.E.; Phuthithammakul, S. (Thai Shell Exploration and Production Co. Ltd., Bangkok (Thailand))

1994-07-01T23:59:59.000Z

73

A low-voltage retarding-field Mott polarimeter for photocathode characterization  

E-Print Network (OSTI)

Nuclear physics experiments at Thomas Jefferson National Accelerator Facility's CEBAF rely on high polarization electron beams. We describe a recently commissioned system for prequalifying and studying photocathodes for CEBAF with a load-locked, low-voltage polarized electron source coupled to a compact retarding-field Mott polarimeter. The polarimeter uses simplified electrode structures and operates from 5 to 30 kV. The effective Sherman function for this device has been calibrated by comparison with the CEBAF 5 MeV Mott polarimeter. For elastic scattering from a thick gold target at 20 keV, the effective Sherman function is 0.201(5). Its maximum efficiency at 20 keV, defined as the detected count rate divided by the incident particle current, is 5.4(2) x 10-4, yielding a figure-of-merit, or analyzing power squared times efficiency, of 1.0(1) x 10-5. The operating parameters of this new polarimeter design are compared to previously published data for other compact Mott polarimeters of the retarding-field type.

James L. McCarter; Marcy L. Stutzman; Kenneth W. Trantham; Tyler G. Anderson; April M. Cook; Timothy J. Gay

2010-03-29T23:59:59.000Z

74

Near-field characterization of hydrogen and helium operation on the TFTR diagnostic neutral beam  

DOE Green Energy (OSTI)

An optical multichannel analyzer has been used to measure beam divergence and composition. This measurement is usually performed near the center of the neutralizer or beyond the magnet. In the past, these locations suffered difficult beam composition analysis and low light intensity, respectively. It has been determined that the light emission is relatively independent of neutralizer line density in the near field, allowing near-field measurements to overcome both difficulties. At optimum perveance, but under conditions of high gas throughput, the helium 1/{ital e} divergence angle was measured to be 1.5{degree}. Further investigation found that the divergence decreased with gas throughput down to 1.25{degree}. Minimum divergences for the full-, half-, and third-energy hydrogen components were 1.1{degree}, 1.2{degree}, and 1.4{degree}, respectively. Relative neutral hydrogen particle fluxes available for injection into TFTR are a function of perveance. At maximum perveance, the full-, half-, and third-energy atom fractions were 0.25{plus minus}0.04, 0.5{plus minus}0.04, and 0.25{plus minus}0.05, respectively.

Kamperschroer, J.H.; Schilling, G.; Roquemore, A.L. (Princeton Plasma Physics Laboratory, Princeton University, Princeton, NJ (USA))

1990-10-01T23:59:59.000Z

75

Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Characterization of the Rust Fungus, Puccinia emaculata, and Evaluation of Genetic Variability for Rust Resistance in Switchgrass Populations Srinivasa Rao Uppalapati & Desalegn D. Serba & Yasuhiro Ishiga & Les J. Szabo & Shipra Mittal & Hem S. Bhandari & Joseph H. Bouton & Kirankumar S. Mysore & Malay C. Saha # The Author(s) 2012. This article is published with open access at Springerlink.com Abstract Several fungal pathogens have been identified on ornamental and native stands of switchgrass (Panicum virga- tum L.). Diseases of switchgrass, particularly rust, have been largely neglected and are likely to become the major limiting factor to biomass yield and quality, especially when monocul- tured over a large acreage. Based on teliospore morphology and internal transcribed spacer-based diagnostic primers, the rust pathogen collected

76

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Golden Field Office Golden Field Office Categorical Exclusion Determinations: Golden Field Office Categorical Exclusion Determinations issued by Golden Field Office. DOCUMENTS AVAILABLE FOR DOWNLOAD August 16, 2013 CX-010747: Categorical Exclusion Determination Advanced Commercial Buildings Initiative CX(s) Applied: A9, A11, B5.1 Date: 08/16/2013 Location(s): Georgia Offices(s): Golden Field Office August 15, 2013 CX-010756: Categorical Exclusion Determination Solar Utility Network Deployment Acceleration CX(s) Applied: A9, A11 Date: 08/15/2013 Location(s): Virginia Offices(s): Golden Field Office August 15, 2013 CX-010754: Categorical Exclusion Determination Industrial Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains CX(s) Applied: A9, B2.2, B2.5

77

Field experience with a new performance characterization procedure for photovoltaic arrays  

DOE Green Energy (OSTI)

As photovoltaic systems become larger and more numerous, improved methods are needed for testing and modeling their performance. Test methods that successfully separate the interacting, time-of-day dependent influences of solar irradiance, operating temperature, solar spectrum, and solar angle-of-incidence have now been developed. These test methods have resulted in a new array performance model that is reasonably simple, yet accurately predicts performance for all operating conditions. This paper describes the new model, outdoor tests required to implement it, results of field tests for five arrays of different technologies, and the evolution of the model into a numerical tool for designing and sizing photovoltaic arrays based on annual energy production.

King, D.L.; Kratochvil, J.A.; Boyson, W.E.

1997-12-31T23:59:59.000Z

78

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California, through the testing and application of advanced reservoir characterization and thermal production technologies. The hope is that successful application of these technologies will result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs, including: (1) Development of three-dimensional (3-D) deterministic and stochastic reservoir simulation models--thermal or otherwise--to aid in reservoir management of the steamflood and post-steamflood phases and subsequent development work. (2) Development of computerized 3-D visualizations of the geologic and reservoir simulation models to aid reservoir surveillance and operations. (3) Perform detailed studies of the geochemical interactions between the steam and the formation rock and fluids. (4) Testing and proposed application of a novel alkaline-steam well completion technique for the containment of the unconsolidated formation sands and control of fluid entry and injection profiles. (5) Installation of a 2100 ft, 14 inch insulated, steam line beneath a harbor channel to supply steam to an island location. (6) Testing and proposed application of thermal recovery technologies to increase oil production and reserves: (a) Performing pilot tests of cyclic steam injection and production on new horizontal wells. (b) Performing pilot tests of hot water-alternating-steam (WAS) drive in the existing steam drive area to improve thermal efficiency. (7) Perform a pilot steamflood with the four horizontal injectors and producers using a pseudo steam-assisted gravity-drainage (SAGD) process. (8) Advanced reservoir management, through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring and evaluation.

Unknown

2001-08-08T23:59:59.000Z

79

Prototype Near-Field/GIS Model for Sequestered-CO2 Risk Characterization and Management  

DOE Green Energy (OSTI)

Detecting unmapped abandoned wells thus remains a major carbon sequestration (CS) technology gap. Many (>10{sup 5}) abandoned wells are thought to lie in potential sequestration sites. For such wells, risk analysis to date has focused on aggregate long-term future impacts of seepage at rates < or << {approx}1 g m{sup 2} d{sup -1} on storage goals as sequestered plumes encroach upon wells with assumed distributions of seal ineffectiveness (Oldenburg and Unger, 2003; Saripali et al. 2003; Celia, 2005). However, unmapped abandoned wells include an unknown number without any effective seal at all, venting through which may dominate CO{sub 2}-loss scenarios. A model of such a well is Crystal Geyser (CG), a prospective oil well abandoned in the 1930s with no barrier installed after it encountered a natural CO{sub 2} reservoir rather than oil (Baer and Rigby, 1978; Rinehart, 1980). CG demonstrates how an unimpeded conduit to the surface now regularly vents from 10{sup 3} to >10{sup 4} kg of CO{sub 2} gas to the terrestrial surface (Figure 1). Unique field data recently gathered from Crystal Geyser (CG) in Utah (Gouveia et al. 2005) confirm that, although resulting surface CO{sub 2} concentrations resulting from CG-like eruptions would likely be safe in general, they could accumulate to pose lethal hazards under relatively rare meteorological and topographic (MT) conditions. This source of foreseeable risk needs to be managed if carbon sequestration is to be publicly accepted. To address this concern, we used CG field data to estimate the source term for a prototype model that identifies zones at relatively highly elevated risk for sequestered-CO{sub 2} casualties. Such a model could be applied both to design and comply with future regulatory requirements to survey high-risk zones in each proposed sequestration site for improperly sealed wells.

Bogen, K T; Homann, S G; Gouveia, F J; Neher, L A

2006-02-10T23:59:59.000Z

80

Structural characterization of the Emperor and Halley fields, Winkler County, West Texas  

E-Print Network (OSTI)

The Halley and Emperor fields, Winkler County, West Texas, are located along the western margin of the Central Basin Platform (CBP), a late Paleozoic fault-bounded structural high in the Permian Basin. Well data, regional 2D seismic lines, and a 3D seismic data set were used to develop a detailed structural and stratigraphic interpretation for the area. Variance volume attributes were derived from the 3D seismic data, which improved imaging of subsurface features. The Halley and Emperor fields are situated over asymmetric anticlines with short steeper limbs that are faulted by steeply dipping reverse faults with a component of right-lateral strike-slip displacement. The orientation of the fold axes and faults is NNW-SSE, which is parallel to the overall trend of the CBP's western margin. Deformation occurred during late Mississippian to early Leonardian (Early Permian) time. The CBP can be subdivided into two major blocks or tectonic domains: the Andector Block to the north and the Fort Stockton Block to the south. These blocks were located between an inferred right-lateral mega-shear, which forced the Andector and Fort Stockton blocks to undergo clockwise rotation. A left-lateral shear zone must have existed along the E-W fault boundary between the Fort Stockton and Andector blocks, in order to accommodate clockwise rotation of the blocks. The Halley structure is situated at the southwestern corner of the Andector Block and shows evidence of younger middle Pennsylvanian to middle Leonardian left-lateral strike-slip deformation. In contrast, deformation along the Emperor structure to the north had ceased by late Pennsylvanian time, as indicated by the age of strata that onlap the structure and fault penetration patterns.

Leone, John Vincent

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Fabrication and characterization of GaN junction field effect transistors  

SciTech Connect

Junction field effect transistors (JFET) were fabricated on a GaN epitaxial structure grown by metal organic chemical vapor deposition. The DC and microwave characteristics, as well as the high temperature performance of the devices were studied. These devices exhibited excellent pinch-off and a breakdown voltage that agreed with theoretical predictions. An extrinsic transconductance (g{sub m}) of 48 mS/mm was obtained with a maximum drain current (I{sub D}) of 270 mA/mm. The microwave measurement showed an f{sub T} of 6 GHz and an f{sub max} of 12 GHz. Both the I{sub D} and the g{sub m} were found to decrease with increasing temperature, possibly due to lower electron mobility at elevated temperatures. These JFETs exhibited a significant current reduction after a high drain bias was applied, which was attributed to a partially depleted channel caused by trapped electrons in the semi-insulating GaN buffer layer.

Zhang, L.; Lester, L.F.; Baca, A.G.; Shul, R.J.; Chang, P.C.; Willison, C.L.; Mishra, U.K.; Denbaars, S.P.; Zolper, J.C.

2000-01-11T23:59:59.000Z

82

Integrated reservoir characterization of a Tulare steamflood finds bypassed oil - South Belridge Field, Kern County, California  

SciTech Connect

Reservoir quality and producibility are directly related to the characteristics of the depositional lithofacies. Electric log gamma ray/resistivity profiles were used to define facies trends within the Tulare steamflood at South Belridge. Channel and non-channel facies profiles are distinctive across the lease with the channel sands having the better quality reservoir and greater net pay values. Sidewall core permeabilities were averaged over the main producing Tulare intervals with the channels averaging 2000-3000 millidarcies and non-channels 200-500 millidarcies. This supports the lithofacies trend and net pay maps. Although the approach is qualitative, it illustrates the dramatic permeability contrast between the channel and non-channel lithofacies. Temperature maps using downhole temperature surveys and flowline temperatures indicate channel facies temperatures up to 300[degrees] with the non-channel facies having 90[degrees] to 100[degrees] temperatures (near ambient). Higher temperatures also relate to higher average daily production rates for channel associated wells. Channel wells averaged greater than 30 BOPD while non-channel wells averaged 10 BOPD or less. New and replacement well nations have been high graded resulting in favorable production responses. Integration of the lithofacies, permeability and temperature data plus ongoing preventive production optimization work has led to a more efficient Tulare steamflood and identification of bypassed oil on the King-Ellis lease in the South Belridge Field.

Walter, D.R.; Wylie, A.S. Jr.; Broussard, K.A. (Santa Fe Energy Resources, Bakersfield, CA (United States))

1996-01-01T23:59:59.000Z

83

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) II-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

1998-03-03T23:59:59.000Z

84

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) II-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation. Summary of Technical Progress

Scott Hara

1997-08-08T23:59:59.000Z

85

Increasing Heavy Oil Reservers in the Wilmington Oil field Through Advanced Reservoir Characterization and Thermal Production Technologies  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) 11-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Hara, Scott [Tidelands Oil Production Co., Long Beach, CA (United States)

1997-05-05T23:59:59.000Z

86

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

2003-09-04T23:59:59.000Z

87

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

2003-06-04T23:59:59.000Z

88

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

2004-03-05T23:59:59.000Z

89

Reservoir characterization and diagenesis of the oligocene 64-zone sandstone, North Belridge Field, Kern County, California  

Science Conference Proceedings (OSTI)

The Oligocene (Zemorrian) 64-Zone sandstone is an important oil and gas reservoir in North Belridge field, Kern County, California. The 64-Zone is a submarine-fan deposit that ranges from 83 to 137 m in thickness. The overall variations in reservoir quality reflect an upward increase in grain size associated with depositional processes. Three diagenetic events have had a significant impact on reservoir quality: (1) compaction, which reduced intergranular volume to an average of 20%, (2) quartz cement, which reduced porosity by an average of 6.2%, and (3) feldspar dissolution. Although an average of 2.7% porosity is directly associated with leached feldspar grains, mass balance calculations indicate secondary porosity is roughly balanced by formation of authigenic kaolinite, resulting in little or no net gain in porosity. Three episodes of calcite cementation reflect various stages of burial history. Petrographic and isotopic data demonstrate that calcite I formed at shallow depths in the zone of bacterial sulfate reduction. Fluid inclusion data indicate that calcite II precipitated at temperatures of 92 to 167[degrees]C from fluids less saline than seawater. Fracture-filing calcite III post-dates calcite II, but formed at lower temperatures (85 to 125[degrees]C). The results of isotopic modeling indicate that calcite II precipitated in equilibrium with waters expelled by shales during I/S diagenesis ([delta][sup 18]O[sub SMOW] = + 2 to +8%) and that calcite III precipitated during tectonic uplift from a mixture of shale-derived and meteoric waters ([delta][sup 18]O[sub SMOW] = 0 to +4%). Most fluid inclusions in calcite II yield temperatures greater than present bottom-hole values ([approximately]110[degrees]C). Assuming that fluid inclusions in calcite II record maximum burial and geothermal gradient of 33[degrees]C/km, tectonic uplift of 0.6 to 1.7 km ([approximately]2000-5700 ft) would be required to explain the fluid inclusion data. 48 refs., 18 figs., 1 tab.

Taylor, T.R. (Shell Development Company, Houston, TX (United States)); Soule, C.H. (Applied Geotechnology, Inc., Bellevue, WA (United States))

1993-09-01T23:59:59.000Z

90

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 CX-000639: Categorical Exclusion Determination Wide Area Wind Field Monitoring CX(s) Applied: A9, B3.6 Date: 02/01/2010 Location(s): Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 1, 2010 CX-000640: Categorical Exclusion Determination Tuscon Solar Initiative Phase II CX(s) Applied: A9, A11 Date: 02/01/2010 Location(s): Tuscon, Arizona Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 1, 2010 CX-000641: Categorical Exclusion Determination Hydro Fellowship Program CX(s) Applied: A9, A11 Date: 02/01/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 1, 2010 CX-000664: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant

91

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

Science Conference Proceedings (OSTI)

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. Through September 2001, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post-steamflood projects. The project team spent the Fourth Quarter 2001 performing routine well work and reservoir surveillance on the Tar II-A post-steamflood and Tar V pilot steamflood projects. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. The project team ramped up well work activity from October 2000 through November 2001 to increase production and injection. In December, water injection well FW-88 was plug and abandoned and replaced by new well FW-295 into the ''D'' sands to accommodate the Port of Long Beach at their expense. Well workovers are planned for 2002 as described in the Operational Management section. Expanding thermal recovery operations to other sections of the Wilmington Oil Field, including the Tar V horizontal well pilot steamflood project, is a critical part of the City of Long Beach and Tidelands Oil Production Company's development strategy for the field. The steamflood operation in the Tar V pilot project is mature and profitable. Recent production performance is below projections because of wellbore mechanical limitations that were being addressed in 2001. As the fluid production is hot, the pilot steamflood was converted to a hot waterflood project in June 2001.

Scott Hara

2002-01-31T23:59:59.000Z

92

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

Science Conference Proceedings (OSTI)

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. Through June 2001, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post-steamflood projects. The project team spent the Third Quarter 2001 performing well work and reservoir surveillance on the Tar II-A post-steamflood project. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. The project team ramped up well work activity from October 2000 to September 2001 to increase production and injection. This work will continue through 2001 as described in the Operational Management section. Expanding thermal recovery operations to other sections of the Wilmington Oil Field, including the Tar V horizontal well pilot steamflood project, is a critical part of the City of Long Beach and Tidelands Oil Production Company's development strategy for the field. The current steamflood operations in the Tar V pilot are economical, but recent performance is below projections because of wellbore mechanical limitations that are being addressed in 2001.

Scott Hara

2001-11-01T23:59:59.000Z

93

Characterization of injection wells in a fractured reservoir using PTS logs, Steamboat Hills Geothermal Field, Nevada, USA  

DOE Green Energy (OSTI)

The Steamboat Hills Geothermal Field in northwestern Nevada, about 15 km south of Reno, is a shallow (150m to 825m) moderate temperature (155 C to 168 C) liquid-dominated geothermal reservoir situated in highly-fractured granodiorite. Three injection wells were drilled and completed in granodiorite to dispose of spent geothermal fluids from the Steamboat II and III power plants (a 30 MW air-cooled binary-type facility). Injection wells were targeted to depths below 300m to inject spent fluids below producing fractures. First, quasi-static downhole pressure-temperature-spinner (PTS) logs were obtained. Then, the three wells were injection-tested using fluids between 80 C and 106 C at rates from 70 kg/s to 200 kg/s. PTS logs were run both up and down the wells during these injection tests. These PTS surveys have delineated the subsurface fracture zones which will accept fluid. The relative injectivity of the wells was also established. Shut-in interzonal flow within the wells was identified and characterized.

Goranson, Colin; Combs, Jim

1995-01-26T23:59:59.000Z

94

Producing Light Oil from a Frozen Reservoir: Reservoir and Fluid Characterization of Umiat Field, National Petroleum Reserve, Alaska  

Science Conference Proceedings (OSTI)

Umiat oil field is a light oil in a shallow, frozen reservoir in the Brooks Range foothills of northern Alaska with estimated oil-in-place of over 1 billion barrels. Umiat field was discovered in the 1940s but was never considered viable because it is shallow, in the permafrost, and far from any transportation infrastructure. The advent of modern drilling and production techniques has made Umiat and similar fields in northern Alaska attractive exploration and production targets. Since 2008 UAF has been working with Renaissance Alaska Inc. and, more recently, Linc Energy, to develop a more robust reservoir model that can be combined with rock and fluid property data to simulate potential production techniques. This work will be used to by Linc Energy as they prepare to drill up to 5 horizontal wells during the 2012-2013 drilling season. This new work identified three potential reservoir horizons within the Cretaceous Nanushuk Formation: the Upper and Lower Grandstand sands, and the overlying Ninuluk sand, with the Lower Grandstand considered the primary target. Seals are provided by thick interlayered shales. Reserve estimates for the Lower Grandstand alone range from 739 million barrels to 2437 million barrels, with an average of 1527 million bbls. Reservoir simulations predict that cold gas injection from a wagon-wheel pattern of multilateral injectors and producers located on 5 drill sites on the crest of the structure will yield 12-15% recovery, with actual recovery depending upon the injection pressure used, the actual Kv/Kh encountered, and other geologic factors. Key to understanding the flow behavior of the Umiat reservoir is determining the permeability structure of the sands. Sandstones of the Cretaceous Nanushuk Formation consist of mixed shoreface and deltaic sandstones and mudstones. A core-based study of the sedimentary facies of these sands combined with outcrop observations identified six distinct facies associations with distinctive permeability trends. The Lower Grandstand sand consists of two coarsening-upward shoreface sands sequences while the Upper Grandstand consists of a single coarsening-upward shoreface sand. Each of the shoreface sands shows a distinctive permeability profile with high horizontal permeability at the top getting progressively poorer towards the base of the sand. In contrast, deltaic sandstones in the overlying Ninuluk are more permeable at the base of the sands, with decreasing permeability towards the sand top. These trends impart a strong permeability anisotropy to the reservoir and are being incorporated into the reservoir model. These observations also suggest that horizontal wells should target the upper part of the major sands. Natural fractures may superimpose another permeability pattern on the Umiat reservoir that need to be accounted for in both the simulation and in drilling. Examination of legacy core from Umiat field indicate that fractures are present in the subsurface, but don't provide information on their orientation and density. Nearby surface exposures of folds in similar stratigraphy indicate there are at least three possible fracture sets: an early, N/S striking set that may predate folding and two sets possibly related to folding: an EW striking set of extension fractures that are parallel to the fold axes and a set of conjugate shear fractures oriented NE and NW. Analysis of fracture spacing suggests that these natural fractures are fairly widely spaced (25-59 cm depending upon the fracture set), but could provide improved reservoir permeability in horizontal legs drilled perpendicular to the open fracture set. The phase behavior of the Umiat fluid needed to be well understood in order for the reservoir simulation to be accurate. However, only a small amount of Umiat oil was available; this oil was collected in the 1940s and was severely weathered. The composition of this dead Umiat fluid was characterized by gas chromatography. This analysis was then compared to theoretical Umiat composition derived using the Pedersen method with original Umiat

Hanks, Catherine

2012-12-31T23:59:59.000Z

95

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Strategic Petroleum Reserve Strategic Petroleum Reserve Field Office Categorical Exclusion Determinations: Strategic Petroleum Reserve Field Office Categorical Exclusion Determinations issued by Strategic Petroleum Reserve Field Office. DOCUMENTS AVAILABLE FOR DOWNLOAD August 22, 2013 CX-010876: Categorical Exclusion Determination Smart and Calibrated Pig Surveys of Strategic Petroleum Reserve Raw Water/Crude Oil Pipelines CX(s) Applied: B1.3 Date: 08/22/2013 Location(s): Texas, Louisiana Offices(s): Strategic Petroleum Reserve Field Office August 19, 2013 CX-010877: Categorical Exclusion Determination Clean and Inspect West Hackberry T-15 Brine Tank CX(s) Applied: B1.3 Date: 08/19/2013 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office August 8, 2013 CX-010878: Categorical Exclusion Determination

96

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 25, 2013 March 25, 2013 CX-010250: Categorical Exclusion Determination The South Bend Public Transportation corporation Bus Operations Center and Maintenance Center, South Bend CX(s) Applied: A9, B5.22 Date: 03/25/2013 Location(s): Indiana Offices(s): Golden Field Office March 25, 2013 CX-010248: Categorical Exclusion Determination Hawaii Renewable Energy Development Venture CX(s) Applied: B5.18 Date: 03/25/2013 Location(s): Hawaii Offices(s): Golden Field Office March 21, 2013 CX-010246: Categorical Exclusion Determination South Table Mountain Denver West Parkway Improvements CX(s) Applied: A9, B1.33 Date: 03/21/2013 Location(s): Colorado Offices(s): Golden Field Office March 21, 2013 CX-010244: Categorical Exclusion Determination Community-Wide Public Facilities Energy Efficiency Retrofit and Biomass

97

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4, 2011 4, 2011 CX-005750: Categorical Exclusion Determination State Energy Program- The Power Alternative- BioEnergy CX(s) Applied: B3.8, B5.1 Date: 05/04/2011 Location(s): Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 4, 2011 CX-005749: Categorical Exclusion Determination State Energy Program - Michigan State University - BioEnergy CX(s) Applied: B3.8, B5.1 Date: 05/04/2011 Location(s): Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 4, 2011 CX-005747: Categorical Exclusion Determination Biobased Materials Automotive Value Chain Market Development Analysis CX(s) Applied: A9 Date: 05/04/2011 Location(s): Boone County, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

98

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 30, 2011 November 30, 2011 CX-007579: Categorical Exclusion Determination Geothermal Technology Advancement for Rapid Development of Resources in the U.S. CX(s) Applied: A9, B3.2, B3.11 Date: 11/30/2011 Location(s): Texas Offices(s): Golden Field Office November 30, 2011 CX-007578: Categorical Exclusion Determination Deep Geothermal Drilling Using Millimeter Wave Technology CX(s) Applied: A9, B3.6 Date: 11/30/2011 Location(s): Oklahoma Offices(s): Golden Field Office November 30, 2011 CX-007577: Categorical Exclusion Determination Scalable High-Efficiency Thin-Crystalline Silicon Cells Enabled by Light-Trapping Nanostructures CX(s) Applied: A9, B3.6 Date: 11/30/2011 Location(s): Massachusetts Offices(s): Golden Field Office November 29, 2011 CX-007576: Categorical Exclusion Determination

99

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 8, 2013 January 8, 2013 CX-010211: Categorical Exclusion Determination Detachment Faulting and Geothermal Resources - An Innovative Integrated Geological and Geophysical Investigation of Pearl Hot Spring, Nevada CX(s) Applied: A9, B3.1, B3.6 Date: 01/08/2013 Location(s): Nevada Offices(s): Golden Field Office January 8, 2013 CX-010210: Categorical Exclusion Determination Pt-based Bi-metallic Monolith Catalysts for Partial Upgrading of Microalgae Oil CX(s) Applied: A9, B3.6 Date: 01/08/2013 Location(s): New Jersey Offices(s): Golden Field Office January 7, 2013 CX-009923: Categorical Exclusion Determination Project Icebreaker CX(s) Applied: A9, B3.1 Date: 01/07/2013 Location(s): Ohio Offices(s): Golden Field Office January 7, 2013 CX-009921: Categorical Exclusion Determination

100

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0, 2009 0, 2009 CX-000251: Categorical Exclusion Determination California City Riverside CX(s) Applied: A9, A11, B5.1 Date: 12/20/2009 Location(s): Riverside, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 18, 2009 CX-000250: Categorical Exclusion Determination WA County Kitsap CX(s) Applied: A9, A11, B5.1 Date: 12/18/2009 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2009 CX-000565: Categorical Exclusion Determination Recovery Act: Wind Blade Manufacturing Innovation CX(s) Applied: A9, B3.6 Date: 12/17/2009 Location(s): North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2009 CX-002152: Categorical Exclusion Determination

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2010 1, 2010 CX-001503: Categorical Exclusion Determination Geothermal Technology Program CX(s) Applied: A9, B5.1 Date: 04/01/2010 Location(s): Nashville, Tennessee Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 1, 2010 CX-001497: Categorical Exclusion Determination Harsh Environment Silicon Carbide Sensor Technology for Geothermal Instrumentation CX(s) Applied: B3.6, A9 Date: 04/01/2010 Location(s): Berkeley, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 1, 2010 CX-001500: Categorical Exclusion Determination Forrest County Geothermal Energy Project CX(s) Applied: B3.1, A9 Date: 04/01/2010 Location(s): Forrest County, Mississippi Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

102

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2010 3, 2010 CX-000920: Categorical Exclusion Determination South Central Solar Consortium CX(s) Applied: A9, B5.1 Date: 02/23/2010 Location(s): Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 22, 2010 CX-000945: Categorical Exclusion Determination Solar Thermal Demonstration Project CX(s) Applied: B5.1, B2.5 Date: 02/22/2010 Location(s): Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 22, 2010 CX-000934: Categorical Exclusion Determination Development of Biofuels CX(s) Applied: B3.6 Date: 02/22/2010 Location(s): Las Vegas, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 22, 2010 CX-000931: Categorical Exclusion Determination Center for Biomass Utilization

103

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 13, 2011 July 13, 2011 CX-006216: Categorical Exclusion Determination Oklahoma State Energy Program American Recovery and Reinvestment Act - Oklahoma Municipal Power Authority Large System Request R CX(s) Applied: B5.1 Date: 07/13/2011 Location(s): Edmond, Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office July 5, 2011 CX-006235: Categorical Exclusion Determination Enhanced Geothermal Systems - Concept Testing and Development at the Raft River Geothermal Field, Idaho CX(s) Applied: A9, B3.1, B5.12 Date: 07/05/2011 Location(s): Cassia County, Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office July 5, 2011 CX-006214: Categorical Exclusion Determination Lime Lakes Energy CX(s) Applied: B5.1 Date: 07/05/2011 Location(s): Barberton, Ohio

104

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 6, 2011 October 6, 2011 CX-006871: Categorical Exclusion Determination Hawaii Renewable Energy Development Venture CX(s) Applied: A9, B3.6, B5.1 Date: 10/06/2011 Location(s): Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2011 CX-006836: Categorical Exclusion Determination Alternative and Unconventional Energy Research and Development CX(s) Applied: B3.6, B3.8 Date: 09/29/2011 Location(s): Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2011 CX-006869: Categorical Exclusion Determination National Agriculture Based Lubricants Center CX(s) Applied: A9, B3.6 Date: 09/29/2011 Location(s): Waterloo, Iowa Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2011

105

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 15, 2011 September 15, 2011 CX-006800: Categorical Exclusion Determination Solar Grade Silicon from Agricultural Byproducts CX(s) Applied: B3.6 Date: 09/15/2011 Location(s): Ann Arbor, Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 13, 2011 CX-006798: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Program: Activity 4 - Government Building Demonstration Projects CX(s) Applied: B5.1 Date: 09/13/2011 Location(s): Louisville, Kentucky Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2011 CX-006807: Categorical Exclusion Determination Energy Production with Innovative Methods of Geothermal Heat Recovery CX(s) Applied: A9 Date: 09/09/2011 Location(s): Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

106

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31, 2012 31, 2012 CX-008560: Categorical Exclusion Determination Small Scale Electrical Power Generation from Heat Co-produced in Geothermal Fluids CX(s) Applied: A9, B3.6, B5.2, B5.15 Date: 05/31/2012 Location(s): Nevada Offices(s): Golden Field Office May 31, 2012 CX-008539: Categorical Exclusion Determination Scale Resistant Heat Exchangers for Low Temperature Geothermal Binary Cycle Power Plant CX(s) Applied: A9, B5.2, B5.15 Date: 05/31/2012 Location(s): California Offices(s): Golden Field Office May 23, 2012 CX-008532: Categorical Exclusion Determination Energize Missouri Homeowners Upgrades and Geothermal Malik CX(s) Applied: B5.19 Date: 05/23/2012 Location(s): Missouri Offices(s): Golden Field Office May 23, 2012 CX-008531: Categorical Exclusion Determination Energize Missouri Homeowners Upgrades and Geothermal Jura

107

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2010 1, 2010 CX-001535: Categorical Exclusion Determination County of Miami-Dade, Florida Energy Efficiency and Conservation Block Grant CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Miami-Dade County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001534: Categorical Exclusion Determination Lake County, Florida Energy Efficiency and Conservation Block Grant Statement of Work (S) CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Lake County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001532: Categorical Exclusion Determination City of Orlando - Statement of Work (S) CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Orlando, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

108

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4, 2010 4, 2010 CX-003228: Categorical Exclusion Determination Vermont Biofuels Initiative: Bournes CX(s) Applied: B3.6 Date: 08/04/2010 Location(s): Vermont Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 4, 2010 CX-003226: Categorical Exclusion Determination Parris Island Wind Resource Assessment; National Renewable Energy Laboratory Tracking Number 10-032 CX(s) Applied: A9, B3.1 Date: 08/04/2010 Location(s): Parris Island, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 4, 2010 CX-003225: Categorical Exclusion Determination Engenuity South Carolina Commercialization and Entrepreneurial Training Project CX(s) Applied: A9 Date: 08/04/2010 Location(s): Columbia, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

109

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 25, 2011 August 25, 2011 CX-006539: Categorical Exclusion Determination Boulder Wind Power Advanced Gearless Drivetrain CX(s) Applied: A9, B3.6 Date: 08/25/2011 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 25, 2011 CX-006509: Categorical Exclusion Determination Fairbanks Geothermal Energy Project CX(s) Applied: A9, B3.1, B5.12 Date: 08/25/2011 Location(s): Fairbanks, Alaska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 24, 2011 CX-006587: Categorical Exclusion Determination Novel Geothermal Development of Deep Sedimentary Systems in the United States CX(s) Applied: A9, B3.6 Date: 08/24/2011 Location(s): Salt Lake City, Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

110

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 27, 2012 March 27, 2012 CX-008208: Categorical Exclusion Determination Renewable Energy and Energy Efficiency Revolving Loan Program - Andreola Farms, Incorporated CX(s) Applied: B5.18 Date: 03/27/2012 Location(s): Nevada Offices(s): Golden Field Office March 26, 2012 CX-008207: Categorical Exclusion Determination Field Evaluation and Validation of Remote Wind Sensing Technologies - Shore-Based and Buoy Mounted Light LIDAR Systems CX(s) Applied: A9, A11, B3.1, B3.16 Date: 03/26/2012 Location(s): New Jersey Offices(s): Golden Field Office March 26, 2012 CX-008206: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Charlotte-Mecklenburg Police Department Parking Deck Electric Vehicle Charging Station CX(s) Applied: B5.23 Date: 03/26/2012 Location(s): North Carolina

111

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 27, 2009 October 27, 2009 CX-000165: Categorical Exclusion Determination California County Contra Costa CX(s) Applied: A9, A11, B5.1 Date: 10/27/2009 Location(s): Contra Costa County, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 27, 2009 CX-000167: Categorical Exclusion Determination Texas County Montgomery CX(s) Applied: A9, A11, B5.1 Date: 10/27/2009 Location(s): Montgomery County, Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 27, 2009 CX-000169: Categorical Exclusion Determination Washington County Clark CX(s) Applied: A9, A11, B5.1 Date: 10/27/2009 Location(s): Clark County, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 27, 2009 CX-000168: Categorical Exclusion Determination

112

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2009 , 2009 CX-000173: Categorical Exclusion Determination New Mexico City Albuquerque CX(s) Applied: A9, B5.1 Date: 11/02/2009 Location(s): Albuquerque, New Mexico Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 2, 2009 CX-000172: Categorical Exclusion Determination Minnesota City St. Paul CX(s) Applied: A9, A11, B5.1 Date: 11/02/2009 Location(s): St. Paul, Minnesota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 2, 2009 CX-000171: Categorical Exclusion Determination California City Sacramento CX(s) Applied: A9, A11, B5.1 Date: 11/02/2009 Location(s): Sacramento, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 2, 2009 CX-000170: Categorical Exclusion Determination

113

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16, 2010 16, 2010 CX-003707: Categorical Exclusion Determination Hawaii Renewable Energy Development Venture CX(s) Applied: A9, B3.6, B5.1 Date: 09/16/2010 Location(s): Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 16, 2010 CX-003701: Categorical Exclusion Determination Bio-Diesel Cellulosic Ethanol Research Project CX(s) Applied: A9 Date: 09/16/2010 Location(s): Hendry County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 16, 2010 CX-003699: Categorical Exclusion Determination Multi-Level Energy Storage and Controls for Large-Scale Wind Energy Integration CX(s) Applied: A9, B3.6 Date: 09/16/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

114

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2010 6, 2010 CX-002574: Categorical Exclusion Determination Expansion of Manufacturing Capabilities to Create Photovoltaic Frames for Panels CX(s) Applied: B5.1 Date: 05/26/2010 Location(s): Germantown, Wisconsin Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2010 CX-002557: Categorical Exclusion Determination G.R. Silicate CX(s) Applied: B5.1 Date: 05/26/2010 Location(s): Hoquiam, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2010 CX-002480: Categorical Exclusion Determination State Energy Program: 21st Century Energy Grants- AAA Cab Service CX(s) Applied: B5.1 Date: 05/26/2010 Location(s): Phoenix, Arizona Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 25, 2010 CX-002417: Categorical Exclusion Determination

115

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 14, 2013 March 14, 2013 CX-010255: Categorical Exclusion Determination Home Energy Score Partner Implementation Model CX(s) Applied: A9 Date: 03/14/2013 Location(s): Washington Offices(s): Golden Field Office March 14, 2013 CX-010247: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant- Fort Lauderdale, Florida CX(s) Applied: B5.1, B5.16, B5.18, B5.23 Date: 03/14/2013 Location(s): Florida Offices(s): Golden Field Office March 14, 2013 CX-010245: Categorical Exclusion Determination Development of a 300 Degree, 200 Level, 3C Fiber Optic Downhole Seismic Receiver Array for Surveying and Monitoring of Geothermal Reservoirs CX(s) Applied: A9, B3.6 Date: 03/14/2013 Location(s): California Offices(s): Golden Field Office March 9, 2013 CX-010270: Categorical Exclusion Determination

116

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10, 2010 10, 2010 CX-003718: Categorical Exclusion Determination Research for Developing Renewable Biofuels from Algae CX(s) Applied: B3.6 Date: 09/10/2010 Location(s): Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 10, 2010 CX-003696: Categorical Exclusion Determination Research and Development of a Low Cost Solar Thermal Collector CX(s) Applied: A9, B3.6 Date: 09/10/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 10, 2010 CX-003695: Categorical Exclusion Determination Baseload Electricity Solar Tower CX(s) Applied: A9, B3.6 Date: 09/10/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2010 CX-003725: Categorical Exclusion Determination

117

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 CX-002844: Categorical Exclusion Determination Military Veteran Wind Training Program CX(s) Applied: A9 Date: 07/01/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 24, 2010 CX-002857: Categorical Exclusion Determination Weather Incorporated Needs Development (W.I.N.D.) CX(s) Applied: A9 Date: 06/24/2010 Location(s): North Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 24, 2010 CX-002823: Categorical Exclusion Determination Nebraska College of Technical Agriculture Biomass Facility CX(s) Applied: B5.1 Date: 06/24/2010 Location(s): Curtis, Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 24, 2010 CX-002822: Categorical Exclusion Determination

118

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2012 1, 2012 CX-008237: Categorical Exclusion Determination 2013 Solar Decathlon and Energy Efficiency and Renewable Energy Showcase Event CX(s) Applied: A9 Date: 05/01/2012 Location(s): California Offices(s): Golden Field Office April 30, 2012 CX-008230: Categorical Exclusion Determination Northeast Photovoltaic Instructor Training Provider CX(s) Applied: A9, A11 Date: 04/30/2012 Location(s): New York Offices(s): Golden Field Office April 30, 2012 CX-008222: Categorical Exclusion Determination Development of Water Based, Critical Flow, Non-Vapor-Compression Cooling Cycle CX(s) Applied: B3.6 Date: 04/30/2012 Location(s): Kansas Offices(s): Golden Field Office April 30, 2012 CX-008221: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Program - State of Kansas

119

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 3, 2013 June 3, 2013 CX-010507: Categorical Exclusion Determination Development and Demonstration of Smart Grid Inverters for High-Penetration Photovoltaic Applications CX(s) Applied: A9, B3.6, B5.16 Date: 06/03/2013 Location(s): Hawaii Offices(s): Golden Field Office June 3, 2013 CX-010504: Categorical Exclusion Determination Installation of Additional Wind Turbine and Tower at NWTC Site 3.2 CX(s) Applied: B5.18 Date: 06/03/2013 Location(s): Colorado Offices(s): Golden Field Office June 3, 2013 CX-010503: Categorical Exclusion Determination Baseload Nitrate Salt Central Receiver Power Plant Design CX(s) Applied: A9, B3.6, B5.17 Date: 06/03/2013 Location(s): Colorado, Colorado Offices(s): Golden Field Office June 3, 2013 CX-010502: Categorical Exclusion Determination Sacramento Municipal Utility District: Community Renewable Energy

120

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 8, 2013 July 8, 2013 CX-010762: Categorical Exclusion Determination Recovery Act: State Geological Survey Contributions to the National Geothermal Data System, Nevada CX(s) Applied: B3.1, B3.6 Date: 07/08/2013 Location(s): Nevada Offices(s): Golden Field Office July 7, 2013 CX-010764: Categorical Exclusion Determination Notice of Proposed Rulemaking for New Energy Conservation Standards for Automatic Commercial Ice Makers CX(s) Applied: B5.1 Date: 07/09/2013 Location(s): Nationwide Offices(s): Golden Field Office July 3, 2013 CX-010694: Categorical Exclusion Determination Waste Heat-to-Power in Small-Scale Industry Using Scroll Expander for Organic Rankine Bottoming Cycle CX(s) Applied: A9, B3.6 Date: 07/03/2013 Location(s): Massachusetts Offices(s): Golden Field Office July 3, 2013

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 18, 2009 November 18, 2009 CX-000195: Categorical Exclusion Determination Washington County Pierce CX(s) Applied: A9, A11, B5.1 Date: 11/18/2009 Location(s): Pierce County, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000194: Categorical Exclusion Determination Ohio City Cincinnati CX(s) Applied: A9, A11, B5.1 Date: 11/18/2009 Location(s): Cincinnati, Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000193: Categorical Exclusion Determination New York City Buffalo CX(s) Applied: A9, B5.1 Date: 11/18/2009 Location(s): Buffalo, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000192: Categorical Exclusion Determination

122

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2010 3, 2010 CX-002381: Categorical Exclusion Determination Green Neighborhood Pilot Program - S CX(s) Applied: A9, A11, B5.1 Date: 05/13/2010 Location(s): Newark, New Jersey Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 13, 2010 CX-002378: Categorical Exclusion Determination Electric Vehicles and Charging Stations CX(s) Applied: B5.1 Date: 05/13/2010 Location(s): Saint Paul, Minnesota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 13, 2010 CX-002377: Categorical Exclusion Determination Offshore Wind Technology Data Collection Project CX(s) Applied: A9 Date: 05/13/2010 Location(s): Lake Michigan, Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 13, 2010 CX-002324: Categorical Exclusion Determination

123

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

14, 2012 14, 2012 CX-008997: Categorical Exclusion Determination Next Generation Solar Collectors for CSP CX(s) Applied: B3.6, B5.17 Date: 08/14/2012 Location(s): Minnesota Offices(s): Golden Field Office August 14, 2012 CX-009026: Categorical Exclusion Determination "A New Method for Low-cost Production of Titanium Alloys for Reducing Energy Consumption of Mechanical Systems CX(s) Applied: A9, B3.6 Date: 08/14/2012 Location(s): Utah Offices(s): Golden Field Office" August 14, 2012 CX-008987: Categorical Exclusion Determination Achieving Regional Energy Efficiency Potential in the Midwest CX(s) Applied: A9, A11 Date: 08/14/2012 Location(s): Illinois Offices(s): Golden Field Office August 13, 2012 CX-009008: Categorical Exclusion Determination Recovery Act State Energy Program Award for the State of Ohio - Revolving

124

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 13, 2012 December 13, 2012 CX-009571: Categorical Exclusion Determination Innovation Realization: Building and Supporting an Advanced Contract Manufacturing Cluster in Southeast Michigan CX(s) Applied: A9, B3.6 Date: 12/13/2012 Location(s): Michigan Offices(s): Golden Field Office December 13, 2012 CX-009559: Categorical Exclusion Determination Light-Duty Fuel Cell Electric Vehicle Validation Data CX(s) Applied: A9 Date: 12/13/2012 Location(s): California Offices(s): Golden Field Office December 12, 2012 CX-009587: Categorical Exclusion Determination City of Houston, Texas CX(s) Applied: B5.1 Date: 12/12/2012 Location(s): Texas Offices(s): Golden Field Office December 12, 2012 CX-009585: Categorical Exclusion Determination Feasibility Study and Design of "Brightfield" Solar Farm

125

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 18, 2010 October 18, 2010 CX-004290: Categorical Exclusion Determination Greenfield Community College - Geothermal Project CX(s) Applied: B5.1 Date: 10/18/2010 Location(s): Massachusetts Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 18, 2010 CX-004288: Categorical Exclusion Determination Carbon Motors Corporation CX(s) Applied: B5.1 Date: 10/18/2010 Location(s): Connersville, Indiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 18, 2010 CX-004284: Categorical Exclusion Determination Recovery Act: Conducting a 3-Dimensional Converted Shear Wave Project CX(s) Applied: A9, B3.1, B3.7 Date: 10/18/2010 Location(s): Imperial County, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

126

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

24, 2011 24, 2011 CX-006023: Categorical Exclusion Determination Oregon Solar Highway CX(s) Applied: A9, B3.1 Date: 05/24/2011 Location(s): West Linn,Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 23, 2011 CX-005992: Categorical Exclusion Determination American Recovery and Reinvestment Act/State Energy Program - State of Louisiana Community Church Unitarian CX(s) Applied: B5.1 Date: 05/23/2011 Location(s): New Orleans, Louisiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2011 CX-005873: Categorical Exclusion Determination Placer County Biomass Utilization Pilot Project CX(s) Applied: A9 Date: 05/20/2011 Location(s): Placer County, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

127

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2010 7, 2010 CX-003856: Categorical Exclusion Determination Road Prison Geothermal Earth Coupled Heating, Ventilation and Air Conditioning (HVAC) Upgrade CX(s) Applied: B5.1 Date: 09/07/2010 Location(s): Escambia County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 7, 2010 CX-003857: Categorical Exclusion Determination Program Coordinator III - University of Georgia CX(s) Applied: B3.6 Date: 09/07/2010 Location(s): Georgia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 7, 2010 CX-003690: Categorical Exclusion Determination Solar Upgrade CX(s) Applied: A9, B5.1 Date: 09/07/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 2, 2010 CX-003854: Categorical Exclusion Determination

128

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2010 7, 2010 CX-002536: Categorical Exclusion Determination American Recovery and Reinvestment Act Green Industry Business Development Program CX(s) Applied: B5.1 Date: 05/27/2010 Location(s): Chicago, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 27, 2010 CX-002538: Categorical Exclusion Determination Tangent Grant Application for American Recovery and Reinvestment Act Business Development Program CX(s) Applied: B5.1 Date: 05/27/2010 Location(s): Aurora, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 27, 2010 CX-002561: Categorical Exclusion Determination CAMPS (Center for Advanced Manufacturing Puget Sound) CX(s) Applied: A9, A11 Date: 05/27/2010 Location(s): Puget Sound, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

129

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 9, 2011 February 9, 2011 CX-005385: Categorical Exclusion Determination Low Cost High Concentration Photovoltaic Power Systems for Utility Power Generation -Sandia Site CX(s) Applied: B5.1 Date: 02/09/2011 Location(s): Albuquerque, New Mexico Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 8, 2011 CX-005165: Categorical Exclusion Determination 215 West Cabarrus Street Electric Vehicle Charging Station CX(s) Applied: B5.1 Date: 02/08/2011 Location(s): Raleigh, North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 8, 2011 CX-005164: Categorical Exclusion Determination Center City Recycling Project CX(s) Applied: B5.1 Date: 02/08/2011 Location(s): Charlotte, North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

130

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2010 9, 2010 CX-001083: Categorical Exclusion Determination Optimal Ground-Source Heat Pump System Design CX(s) Applied: A9 Date: 03/09/2010 Location(s): New Jersey Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 8, 2010 CX-001091: Categorical Exclusion Determination High Temperature High Volume Lifting for Enhanced Geothermal Systems CX(s) Applied: A9, B3.6 Date: 03/08/2010 Location(s): Niskayuna, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 5, 2010 CX-001054: Categorical Exclusion Determination Aquantis 2.5 Megawatt Ocean Current Generation Device CX(s) Applied: A9, B3.6 Date: 03/05/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 5, 2010 CX-001099: Categorical Exclusion Determination

131

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

18, 2011 18, 2011 CX-005878: Categorical Exclusion Determination Heritage Aquatic Complex - Solar Photovoltaic Project CX(s) Applied: B5.1 Date: 05/18/2011 Location(s): Henderson, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 18, 2011 CX-005875: Categorical Exclusion Determination Hawaii Hydrogen Power Park - Technology Validation of a Hydrogen Fueling System CX(s) Applied: B5.1 Date: 05/18/2011 Location(s): Honolulu, Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 17, 2011 CX-005930: Categorical Exclusion Determination Biofuel Micro-Refineries for Local Sustainability CX(s) Applied: A9, B3.1, B3.6 Date: 05/17/2011 Location(s): Memphis, Tennessee Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

132

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 4, 2011 January 4, 2011 CX-004858: Categorical Exclusion Determination Facility Conservation Improvement Program Loan CX(s) Applied: A9, A11, B5.1 Date: 01/04/2011 Location(s): Kansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 4, 2011 CX-004857: Categorical Exclusion Determination Building Operations Certification License CX(s) Applied: A9, A11, B5.1 Date: 01/04/2011 Location(s): Kansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 30, 2010 CX-004860: Categorical Exclusion Determination Watershed Scale Optimization to Meet Sustainable Cellulosic Energy Crop Demand CX(s) Applied: A9, B3.1 Date: 12/30/2010 Location(s): Purdue University, Indiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

133

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2009 3, 2009 CX-000211: Categorical Exclusion Determination Wyoming Residential Renewable Energy Grants CX(s) Applied: B5.1 Date: 11/23/2009 Location(s): Wyoming Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 19, 2009 CX-000196: Categorical Exclusion Determination Alternative Crops and Biofuels Production CX(s) Applied: A9 Date: 11/19/2009 Location(s): Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 19, 2009 CX-000197: Categorical Exclusion Determination University Of South Dakota Catalysis Group for Alternative Energy CX(s) Applied: B3.6 Date: 11/19/2009 Location(s): Vermillion, South Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000191: Categorical Exclusion Determination

134

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 21, 2010 January 21, 2010 CX-000625: Categorical Exclusion Determination New Membrane Electrode Assemblies Materials for Improved Direct Methanol Fuel Cell Performance, Durability and Cost CX(s) Applied: B3.6 Date: 01/21/2010 Location(s): Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 21, 2010 CX-000626: Categorical Exclusion Determination Advanced Direct Methanol Fuel Cell for Mobile Computing CX(s) Applied: B3.6 Date: 01/21/2010 Location(s): Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 21, 2010 CX-000630: Categorical Exclusion Determination A Partnership Model to Build Solar Training Capacity in the Midwest CX(s) Applied: A9, A11 Date: 01/21/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

135

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2010 2, 2010 CX-003345: Categorical Exclusion Determination Integrated Renewable Energy and Campus Sustainability Initiative CX(s) Applied: A9 Date: 08/12/2010 Location(s): Decorah, Iowa Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 12, 2010 CX-003417: Categorical Exclusion Determination Energy Efficiency Projects CX(s) Applied: B5.1 Date: 08/12/2010 Location(s): Plover, Wisconsin Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 12, 2010 CX-003405: Categorical Exclusion Determination Blue Ridge Community Unit School District #18 CX(s) Applied: B5.1 Date: 08/12/2010 Location(s): Mansfield, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 11, 2010 CX-003358: Categorical Exclusion Determination

136

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

14, 2010 14, 2010 CX-004743: Categorical Exclusion Determination New River Solar Thermal Hot Water Project CX(s) Applied: B5.1 Date: 12/14/2010 Location(s): Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 14, 2010 CX-004741: Categorical Exclusion Determination Ocean Thermal Energy Conversion Cold Water Pipe-Platform Subsystem Dynamic Interaction Validation CX(s) Applied: A9, B3.6 Date: 12/14/2010 Location(s): Manassas, Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 14, 2010 CX-004739: Categorical Exclusion Determination Evaluation of Wilcox Geothermal Reservoir and Demonstration of Geothermal Energy Production -Phase 1 CX(s) Applied: A9, B3.1 Date: 12/14/2010 Location(s): Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

137

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 31, 2012 July 31, 2012 CX-009442: Categorical Exclusion Determination Cutters Grove, Anoka CX(s) Applied: A9, B5.19 Date: 07/31/2012 Location(s): Minnesota Offices(s): Golden Field Office July 26, 2012 CX-008606: Categorical Exclusion Determination Photovoltaic Solar Demonstration Project Energy Efficiency and Conservation Block Grant Program-City of EI Paso, Texas CX(s) Applied: A9, B3.14, B5.16 Date: 07/26/2012 Location(s): Texas Offices(s): Golden Field Office July 26, 2012 CX-008602: Categorical Exclusion Determination Oklahoma State Energy Program- Oklahoma Municipal Power Authority Large Systems Request AO CX(s) Applied: B5.19 Date: 07/26/2012 Location(s): Oklahoma, Oklahoma Offices(s): Golden Field Office July 26, 2012 CX-008580: Categorical Exclusion Determination Recovery Act Arizona Geological Survey Contributions to the National

138

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0, 2010 0, 2010 CX-002559: Categorical Exclusion Determination Washington Credit Enhancement CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002492: Categorical Exclusion Determination Southern Illinois University Carbondale: Stone Center Geothermal CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Carbondale, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002491: Categorical Exclusion Determination Champaign Unit 4 School District: Westview Elementary School - Ground Source Heat Pump Project CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Champaign, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

139

Reservoir Characterization of Bridgeport and Cypress Sandstones in Lawrence Field Illinois to Improve Petroleum Recovery by Alkaline-Surfactant-Polymer Flood  

SciTech Connect

Within the Illinois Basin, most of the oilfields are mature and have been extensively waterflooded with water cuts that range up to 99% in many of the larger fields. In order to maximize production of significant remaining mobile oil from these fields, new recovery techniques need to be researched and applied. The purpose of this project was to conduct reservoir characterization studies supporting Alkaline-Surfactant-Polymer Floods in two distinct sandstone reservoirs in Lawrence Field, Lawrence County, Illinois. A project using alkaline-surfactantpolymer (ASP) has been established in the century old Lawrence Field in southeastern Illinois where original oil in place (OOIP) is estimated at over a billion barrels and 400 million barrels have been recovered leaving more than 600 million barrels as an EOR target. Radial core flood analysis using core from the field demonstrated recoveries greater than 20% of OOIP. While the lab results are likely optimistic to actual field performance, the ASP tests indicate that substantial reserves could be recovered even if the field results are 5 to 10% of OOIP. Reservoir characterization is a key factor in the success of any EOR application. Reservoirs within the Illinois Basin are frequently characterized as being highly compartmentalized resulting in multiple flow unit configurations. The research conducted on Lawrence Field focused on characteristics that define reservoir compartmentalization in order to delineate preferred target areas so that the chemical flood can be designed and implemented for the greatest recovery potential. Along with traditional facies mapping, core analyses and petrographic analyses, conceptual geological models were constructed and used to develop 3D geocellular models, a valuable tool for visualizing reservoir architecture and also a prerequisite for reservoir simulation modeling. Cores were described and potential permeability barriers were correlated using geophysical logs. Petrographic analyses were used to better understand porosity and permeability trends in the region and to characterize barriers and define flow units. Diagenetic alterations that impact porosity and permeability include development of quartz overgrowths, sutured quartz grains, dissolution of feldspar grains, formation of clay mineral coatings on grains, and calcite cementation. Many of these alterations are controlled by facies. Mapping efforts identified distinct flow units in the northern part of the field showing that the Pennsylvanian Bridgeport consists of a series of thick incised channel fill sequences. The sandstones are about 75-150 feet thick and typically consist of medium grained and poorly sorted fluvial to distributary channel fill deposits at the base. The sandstones become indistinctly bedded distributary channel deposits in the main part of the reservoir before fining upwards and becoming more tidally influenced near their top. These channel deposits have core permeabilities ranging from 20 md to well over 1000 md. The tidally influenced deposits are more compartmentalized compared to the thicker and more continuous basal fluvial deposits. Fine grained sandstones that are laterally equivalent to the thicker channel type deposits have permeabilities rarely reaching above 250 md. Most of the unrecovered oil in Lawrence Field is contained in Pennsylvanian Age Bridgeport sandstones and Mississippian Age Cypress sandstones. These reservoirs are highly complex and compartmentalized. Detailed reservoir characterization including the development of 3-D geologic and geocellular models of target areas in the field were completed to identify areas with the best potential to recover remaining reserves including unswept and by-passed oil. This project consisted of tasks designed to compile, interpret, and analyze the data required to conduct reservoir characterization for the Bridgeport and Cypress sandstones in pilot areas in anticipation of expanded implementation of ASP flooding in Lawrence Field. Geologic and geocellular modeling needed for reservoir characterization and res

Seyler, Beverly; Grube, John; Huff, Bryan; Webb, Nathan; Damico, James; Blakley, Curt; Madhavan, Vineeth; Johanek, Philip; Frailey, Scott

2012-12-21T23:59:59.000Z

140

Silurian "Clinton" Sandstone Reservoir Characterization for Evaluation of CO2-EOR Potential in the East Canton Oil Field, Ohio  

SciTech Connect

The purpose of this study was to evaluate the efficacy of using CO2-enhanced oil recovery (EOR) in the East Canton oil field (ECOF). Discovered in 1947, the ECOF in northeastern Ohio has produced approximately 95 million barrels (MMbbl) of oil from the Silurian Clinton sandstone. The original oil-in-place (OOIP) for this field was approximately 1.5 billion bbl and this study estimates by modeling known reservoir parameters, that between 76 and 279 MMbbl of additional oil could be produced through secondary recovery in this field, depending on the fluid and formation response to CO2 injection. A CO2 cyclic test (Huff-n-Puff) was conducted on a well in Stark County to test the injectivity in a Clinton-producing oil well in the ECOF and estimate the dispersion or potential breakthrough of the CO2 to surrounding wells. Eighty-one tons of CO2 (1.39 MMCF) were injected over a 20-hour period, after which the well was shut in for a 32-day soak period before production was resumed. Results demonstrated injection rates of 1.67 MMCF of gas per day, which was much higher than anticipated and no CO2 was detected in gas samples taken from eight immediately offsetting observation wells. All data collected during this test was analyzed, interpreted, and incorporated into the reservoir characterization study and used to develop the geologic model. The geologic model was used as input into a reservoir simulation performed by Fekete Associates, Inc., to estimate the behavior of reservoir fluids when large quantities of CO2 are injected into the Clinton sandstone. Results strongly suggest that the majority of the injected CO2 entered the matrix porosity of the reservoir pay zones, where it diffused into the oil. Evidence includes: (A) the volume of injected CO2 greatly exceeded the estimated capacity of the hydraulic fracture and natural fractures; (B) there was a gradual injection and pressure rate build-up during the test; (C) there was a subsequent, gradual flashout of the CO2 within the reservoir during the ensuing monitored production period; and (D) a large amount of CO2 continually off-gassed from wellhead oil samples collected as late as 3 months after injection. After the test well was returned to production, it produced 174 bbl of oil during a 60-day period (September 22 to November 21, 2008), which represents an estimated 58 percent increase in incremental oil production over preinjection estimates of production under normal, conditions. The geologic model was used in a reservoir simulation model for a 700-acre model area and to design a pilot to test the model. The model was designed to achieve a 1-year response time and a five-year simulation period. The reservoir simulation modeling indicated that the injection wells could enhance oil production and lead to an additional 20 percent recovery in the pilot area over a five-year period. The base case estimated that by injecting 500 MCF per day of CO2 into each of the four corner wells, 26,000 STBO would be produced by the central producer over the five-year period. This would compare to 3,000 STBO if a new well were drilled without the benefit of CO2 injection. This study has added significant knowledge to the reservoir characterization of the Clinton in the ECOF and succeeded in identifying a range on CO2-EOR potential. However, additional data on fluid properties (PVT and swelling test), fractures (oriented core and microseis), and reservoir characteristics (relative permeability, capillary pressure, and wet ability) are needed to further narrow the uncertainties and refine the reservoir model and simulation. After collection of this data and refinement of the model and simulation, it is recommended that a larger scale cyclic- CO2 injection test be conducted to better determine the efficacy of CO2-EOR in the Clinton reservoir in the ECOF.

Riley, Ronald; Wicks, John; Perry, Christopher

2009-12-30T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Silurian "Clinton" Sandstone Reservoir Characterization for Evaluation of CO2-EOR Potential in the East Canton Oil Field, Ohio  

Science Conference Proceedings (OSTI)

The purpose of this study was to evaluate the efficacy of using CO2-enhanced oil recovery (EOR) in the East Canton oil field (ECOF). Discovered in 1947, the ECOF in northeastern Ohio has produced approximately 95 million barrels (MMbbl) of oil from the Silurian 'Clinton' sandstone. The original oil-in-place (OOIP) for this field was approximately 1.5 billion bbl and this study estimates by modeling known reservoir parameters, that between 76 and 279 MMbbl of additional oil could be produced through secondary recovery in this field, depending on the fluid and formation response to CO2 injection. A CO2 cyclic test ('Huff-n-Puff') was conducted on a well in Stark County to test the injectivity in a 'Clinton'-producing oil well in the ECOF and estimate the dispersion or potential breakthrough of the CO2 to surrounding wells. Eighty-one tons of CO2 (1.39 MMCF) were injected over a 20-hour period, after which the well was shut in for a 32-day 'soak' period before production was resumed. Results demonstrated injection rates of 1.67 MMCF of gas per day, which was much higher than anticipated and no CO2 was detected in gas samples taken from eight immediately offsetting observation wells. All data collected during this test was analyzed, interpreted, and incorporated into the reservoir characterization study and used to develop the geologic model. The geologic model was used as input into a reservoir simulation performed by Fekete Associates, Inc., to estimate the behavior of reservoir fluids when large quantities of CO2 are injected into the 'Clinton' sandstone. Results strongly suggest that the majority of the injected CO2 entered the matrix porosity of the reservoir pay zones, where it diffused into the oil. Evidence includes: (A) the volume of injected CO2 greatly exceeded the estimated capacity of the hydraulic fracture and natural fractures; (B) there was a gradual injection and pressure rate build-up during the test; (C) there was a subsequent, gradual flashout of the CO2 within the reservoir during the ensuing monitored production period; and (D) a large amount of CO2 continually off-gassed from wellhead oil samples collected as late as 3 1/2 months after injection. After the test well was returned to production, it produced 174 bbl of oil during a 60-day period (September 22 to November 21, 2008), which represents an estimated 58 percent increase in incremental oil production over preinjection estimates of production under normal, conditions. The geologic model was used in a reservoir simulation model for a 700-acre model area and to design a pilot to test the model. The model was designed to achieve a 1-year response time and a five-year simulation period. The reservoir simulation modeling indicated that the injection wells could enhance oil production and lead to an additional 20 percent recovery in the pilot area over a five-year period. The base case estimated that by injecting 500 MCF per day of CO2 into each of the four corner wells, 26,000 STBO would be produced by the central producer over the five-year period. This would compare to 3,000 STBO if a new well were drilled without the benefit of CO2 injection. This study has added significant knowledge to the reservoir characterization of the 'Clinton' in the ECOF and succeeded in identifying a range on CO2-EOR potential. However, additional data on fluid properties (PVT and swelling test), fractures (oriented core and microseis), and reservoir characteristics (relative permeability, capillary pressure, and wet ability) are needed to further narrow the uncertainties and refine the reservoir model and simulation. After collection of this data and refinement of the model and simulation, it is recommended that a larger scale cyclic-CO2 injection test be conducted to better determine the efficacy of CO2-EOR in the 'Clinton' reservoir in the ECOF.

Ronald Riley; John Wicks; Christopher Perry

2009-12-30T23:59:59.000Z

142

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

Science Conference Proceedings (OSTI)

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. Through December 2001, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post-steamflood projects. During the First Quarter 2002, the project team developed an accelerated oil recovery and reservoir cooling plan for the Tar II-A post-steamflood project and began implementing the associated well work in March. The Tar V pilot steamflood project will be converted to post-steamflood cold water injection in April 2002. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. Most of the 2001 well work resulted in maintaining oil and gross fluid production and water injection rates. Reservoir pressures in the ''T'' and ''D'' sands are at 88% and 91% hydrostatic levels, respectively. Well work during the first quarter and plans for 2002 are described in the Reservoir Management section. The steamflood operation in the Tar V pilot project is mature and profitable. Recent production performance has been below projections because of wellbore mechanical limitations that have been addressed during this quarter. As the fluid production temperatures were beginning to exceed 350 F, our self-imposed temperature limit, the pilot steamflood was converted to a hot waterflood project in June 2001 and will be converted to cold water injection next quarter.

Scott Hara

2002-04-30T23:59:59.000Z

143

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2011 6, 2011 CX-005429: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act -Solid Waste Authority of Central Ohio CX(s) Applied: B5.1 Date: 03/16/2011 Location(s): Grove City, Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 16, 2011 CX-005425: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Brookhaven New York: Henrietta Acampora Recreation Center CX(s) Applied: B5.1 Date: 03/16/2011 Location(s): Brookhaven, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 16, 2011 CX-005412: Categorical Exclusion Determination State Energy Program Passive Solar Hoophouse Implementation CX(s) Applied: B5.1 Date: 03/16/2011 Location(s): Michigan

144

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2011 9, 2011 CX-006797: Categorical Exclusion Determination Chicago Climate Action Plan Advanced Transportation Technologies Initiative CX(s) Applied: A9, B5.1 Date: 09/09/2011 Location(s): Chicago, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2011 CX-006782: Categorical Exclusion Determination Advanced Horizontal Well Recirculation Systems for Geothermal Energy Recovery in Sedimentary and Crystalline Formations CX(s) Applied: A9, B3.6 Date: 09/09/2011 Location(s): Irvine, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2011 CX-006781: Categorical Exclusion Determination Community-Wide Public Facilities Energy Efficiency and Biomass Heating Conversion Project CX(s) Applied: B5.1

145

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 CX-004368: Categorical Exclusion Determination Pascal Senior Center Energy Efficiency Project CX(s) Applied: B5.1 Date: 11/01/2010 Location(s): Anne Arundel County, Maryland Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 1, 2010 CX-004367: Categorical Exclusion Determination Small Cities and Counties Initiative: Pendleton County Geothermal CX(s) Applied: B5.1 Date: 11/01/2010 Location(s): Pendleton County, Kentucky Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 1, 2010 CX-004365: Categorical Exclusion Determination Small Business, Non-Profit and Higher Education Grant Program: Greater Elkhart Chamber of Commerce Ground Source Heat Pump CX(s) Applied: B5.1 Date: 11/01/2010 Location(s): Elkhart, Indiana

146

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15, 2010 15, 2010 CX-001820: Categorical Exclusion Determination City of Houston, Texas (TX) Energy Efficiency and Conservation Block Grant (EECBG) CX(s) Applied: A9, A11, B5.1 Date: 04/15/2010 Location(s): Houston, Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001536: Categorical Exclusion Determination City of Bonners Ferry Methane Reduction CX(s) Applied: A9, A11, B5.1 Date: 04/15/2010 Location(s): Bonners Ferry, Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001553: Categorical Exclusion Determination Charlotte Activities 1, 4, 5, 6, 7, 10, 11, 17, and 19 American Recovery and Reinvestment Act (ARRA)-Energy Efficiency and Conservation Block Grant (EECBG) Strategy-Only CX(s) Applied: B2.5, A9, A11, B5.1

147

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 28, 2009 December 28, 2009 CX-000269: Categorical Exclusion Determination High Penetration Solar Deployment CX(s) Applied: A9, B3.1 Date: 12/28/2009 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 28, 2009 CX-000268: Categorical Exclusion Determination High Efficiency, Low-Cost, Multijunction Solar Cells Based on Epitaxial Liftoff and Wafer Bonding; National Renewable Energy Laboratory Tracking Number 09-041 CX(s) Applied: B3.6 Date: 12/28/2009 Location(s): Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 28, 2009 CX-000267: Categorical Exclusion Determination A New Analytic-Adaptive Model for Enhanced Geothermal System Assessment, Development and Management Support CX(s) Applied: A9

148

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

24, 2011 24, 2011 CX-005322: Categorical Exclusion Determination Subtask 2.1 Maui Site: National Marine Renewable Energy Center in Hawaii CX(s) Applied: A9, B3.1 Date: 02/24/2011 Location(s): Maui, Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 16, 2011 CX-005219: Categorical Exclusion Determination Van Dyk Dairy Anaerobic Digester CX(s) Applied: A9, B3.8, B5.1 Date: 02/16/2011 Location(s): Lynden, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 16, 2011 CX-005217: Categorical Exclusion Determination State Energy Program American Reinvestment and Recovery Act Sirti -Demand Energy -Energy Storage System Tied to Solar on Commercial Facility CX(s) Applied: A9, B1.7, B5.1 Date: 02/16/2011 Location(s): Liberty Lake, Washington

149

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15, 2010 15, 2010 CX-001924: Categorical Exclusion Determination Market Title E: Renewable Energy and Energy Efficiency Revolving Loan Program and Market Title B: Energy Efficiency and Renewable Energy for Schools CX(s) Applied: A9, A11, B5.1 Date: 03/15/2010 Location(s): Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 15, 2010 CX-001238: Categorical Exclusion Determination Multiparameter Fiber Optic Sensing System for Monitoring Enhanced Geothermal Systems CX(s) Applied: A9, B3.6 Date: 03/15/2010 Location(s): Niskayuna, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 15, 2010 CX-001237: Categorical Exclusion Determination Silver Peak Innovative Exploration Project CX(s) Applied: A9, B3.1, B5.1 Date: 03/15/2010

150

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 17, 2010 December 17, 2010 CX-004835: Categorical Exclusion Determination Electric Vehicle Charging Stations City of Mill Creek CX(s) Applied: B5.1 Date: 12/17/2010 Location(s): Mill Creek, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2010 CX-004795: Categorical Exclusion Determination Wave-Actuated Power Take Off Device for Electricity Generation CX(s) Applied: A9, B3.6 Date: 12/17/2010 Location(s): Boston, Massachusetts Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2010 CX-004791: Categorical Exclusion Determination Hydroelectric Facility Improvement Project? Automated Intake Cleaning Equipment and Materials Management CX(s) Applied: B5.1 Date: 12/17/2010 Location(s): North Little Rock, Arkansas

151

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2010 8, 2010 CX-001936: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Small Cities and Counties Initiative (Subgrant): Livingston County Geothermal Project CX(s) Applied: B5.1 Date: 04/28/2010 Location(s): Livingston County, Kentucky Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 28, 2010 CX-001824: Categorical Exclusion Determination Recovery Act: District Energy Southwest 40th Street Thermal Plant CX(s) Applied: A9, B5.1 Date: 04/28/2010 Location(s): Lancaster County, Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 28, 2010 CX-002124: Categorical Exclusion Determination Herd Company Feedlot Renewable Biomass Waste to Energy Production Facility CX(s) Applied: B2.5, B5.1

152

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2010 6, 2010 CX-004466: Categorical Exclusion Determination Washington State Biofuels Industry Development CX(s) Applied: B3.6 Date: 11/16/2010 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 16, 2010 CX-004459: Categorical Exclusion Determination Wind and Water -Delos-Reyes Morrow Pressure: Simple, Scalable, and Submerged CX(s) Applied: A9 Date: 11/16/2010 Location(s): Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 16, 2010 CX-004458: Categorical Exclusion Determination Cincinnati City American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant Act 3 (Mill Creek Restoration Project - Phase 3) CX(s) Applied: A9, A11, B5.1 Date: 11/16/2010 Location(s): Cincinnati, Ohio

153

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2010 8, 2010 CX-003402: Categorical Exclusion Determination Corrugated Membrane and Fuel Cell Structures CX(s) Applied: B3.6 Date: 08/16/2010 Location(s): New Castle, Delaware Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 17, 2010 CX-003497: Categorical Exclusion Determination Research on Fuel Cell Powered by Hydrogen from Biomass to Provide Clean Energy for Remote Farms away from Electric Grid CX(s) Applied: A9 Date: 08/17/2010 Location(s): Farmingdale, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 17, 2010 CX-003493: Categorical Exclusion Determination Recovery Act: Innovative Exploration Techniques for Geothermal Assessment at Jemez Pueblo, New Mexico CX(s) Applied: B3.1 Date: 08/17/2010 Location(s): New Mexico

154

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16, 2010 16, 2010 CX-001710: Categorical Exclusion Determination Young Women's Christian Association (YWCA) Family Village at Issaquah CX(s) Applied: B2.1, B2.5, B5.1 Date: 04/16/2010 Location(s): Issaquah, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 16, 2010 CX-001709: Categorical Exclusion Determination Application Titled: Integration of Noise and Coda Correlation Data CX(s) Applied: A9 Date: 04/16/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 16, 2010 CX-001708: Categorical Exclusion Determination Irma Charing Cross Sidewalk Project American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant CX(s) Applied: B5.1 Date: 04/16/2010 Location(s): Irmo, South Carolina

155

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2010 2, 2010 CX-003902: Categorical Exclusion Determination Small Wind Turbine Regional Test Center Windward Engineering, LLC in Utah - NREL Tracking Number 10-027 CX(s) Applied: A9, A11, B1.15, B3.1, B5.1 Date: 09/02/2010 Location(s): Spanish Fork, Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 2, 2010 CX-003890: Categorical Exclusion Determination BioEthanol Collaborative - Clemson University CX(s) Applied: B3.6 Date: 09/02/2010 Location(s): South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 1, 2010 CX-003859: Categorical Exclusion Determination Edwardsville Community Unit School District (CUSD) 7 Solar Photovoltaic Project CX(s) Applied: A9, B5.1 Date: 09/01/2010 Location(s): Edwardsville, Illinois

156

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2010 1, 2010 CX-002563: Categorical Exclusion Determination Clark Public Utilities CX(s) Applied: B5.1 Date: 05/21/2010 Location(s): Camas, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002414: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Award Adair County, Oklahoma Materials Recycling Project CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Watts, Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002385: Categorical Exclusion Determination Ohio State American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant - Act 1 (County Building Retrofits) Lucas County I - Boiler Interconnection CX(s) Applied: A9, A11, B5.1

157

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

17, 2010 17, 2010 CX-002661: Categorical Exclusion Determination Monarch Warren County Turbine Project CX(s) Applied: B3.1, A9 Date: 03/17/2010 Location(s): Warren County, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 17, 2010 CX-001241: Categorical Exclusion Determination Wellford Landfill Methane and Greenhouse Gas to Energy Project CX(s) Applied: A9 Date: 03/17/2010 Location(s): Spartanburg County, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 16, 2010 CX-001918: Categorical Exclusion Determination Market 5: Promote the Use of Green and Renewable Energy Generation Facilities, Products, and its Supply Chain for the Purpose of Reducing Greenhouse Gases CX(s) Applied: B1.31, B5.1 Date: 03/16/2010

158

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 28, 2010 January 28, 2010 CX-000642: Categorical Exclusion Determination Recovery Act: North Little Rock Hydroelectric Department Hydroelectric Facility Improvement Project: Automated Intake Clearing Equipment and Material; Management CX(s) Applied: A9 Date: 01/28/2010 Location(s): North Little Rock, Arkansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 28, 2010 CX-000647: Categorical Exclusion Determination K-12 Energy Efficiency Project CX(s) Applied: B5.1 Date: 01/28/2010 Location(s): Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 28, 2010 CX-000651: Categorical Exclusion Determination Deployment of Innovative Energy Efficiency and Renewable Energy - Buildings CX(s) Applied: B5.1 Date: 01/28/2010

159

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

22, 2010 22, 2010 CX-004834: Categorical Exclusion Determination Scott Jenkins Parking Lot Light Emitting Diode Lighting with Solar Arrays and On?site Electric Vehicle Charging Stations CX(s) Applied: B5.1 Date: 12/22/2010 Location(s): Loudoun County, Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 22, 2010 CX-004832: Categorical Exclusion Determination Large Scale Solar - Roof Mounted - Red Rock Canyon School CX(s) Applied: B5.1 Date: 12/22/2010 Location(s): Saint George, Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 22, 2010 CX-004831: Categorical Exclusion Determination Midsize Wind Turbine Designed and Manufactured in the United States of America (BUDGET PERIOD 1) CX(s) Applied: A9 Date: 12/22/2010

160

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31, 2011 31, 2011 CX-005998: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Buckman United States of America - Tier II: Insulation Project and Boiler Control System CX(s) Applied: B5.1 Date: 05/31/2011 Location(s): Cadet, Missouri Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 31, 2011 CX-005989: Categorical Exclusion Determination Ground Source Heat Pump Retrofit CX(s) Applied: B5.1 Date: 05/31/2011 Location(s): Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 31, 2011 CX-005951: Categorical Exclusion Determination Silicon Valley Technology Center Solar: A Photovoltaic Manufacturing Development Facility CX(s) Applied: B3.6, B5.1 Date: 05/31/2011 Location(s): San Jose, California

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

Science Conference Proceedings (OSTI)

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., CA. Through June 2002, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V post-steamflood pilot and Tar II-A post-steamflood projects. During the Third Quarter 2002, the project team essentially completed implementing the accelerated oil recovery and reservoir cooling plan for the Tar II-A post-steamflood project developed in March 2002 and is proceeding with additional related work. The project team has completed developing laboratory research procedures to analyze the sand consolidation well completion technique and will initiate work in the fourth quarter. The Tar V pilot steamflood project terminated hot water injection and converted to post-steamflood cold water injection on April 19, 2002. Proposals have been approved to repair two sand consolidated horizontal wells that sanded up, Tar II-A well UP-955 and Tar V well J-205, with gravel-packed inner liner jobs to be performed next quarter. Other well work to be performed next quarter is to convert well L-337 to a Tar V water injector and to recomplete vertical well A-194 as a Tar V interior steamflood pattern producer. Plans have been approved to drill and complete well A-605 in Tar V in the first quarter 2003. Plans have been approved to update the Tar II-A 3-D deterministic reservoir simulation model and run sensitivity cases to evaluate the accelerated oil recovery and reservoir cooling plan. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. Well work related to the Tar II-A accelerated oil recovery and reservoir cooling plan began in March 2002 with oil production increasing from 1009 BOPD in the first quarter to 1145 BOPD in the third quarter. Reservoir pressures have been increased during the quarter from 88% to 91% hydrostatic levels in the ''T'' sands and from 91% to 94% hydrostatic levels in the ''D'' sands. Well work during the quarter is described in the Reservoir Management section. The post-steamflood production performance in the Tar V pilot project has been below projections because of wellbore mechanical limitations and the loss of a horizontal producer a second time to sand inflow that are being addressed in the fourth quarter. As the fluid production temperatures exceeded 350 F, our self-imposed temperature limit, the pilot steamflood was converted to a hot waterflood project in June 2001 and converted to cold water injection on April 19, 2002.

Scott Hara

2002-11-08T23:59:59.000Z

162

Categorical Exclusion Determinations: Carlsbad Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carlsbad Field Office Carlsbad Field Office Categorical Exclusion Determinations: Carlsbad Field Office Categorical Exclusion Determinations issued by Carlsbad Field Office. DOCUMENTS AVAILABLE FOR DOWNLOAD March 25, 2013 CX-010102: Categorical Exclusion Determination Lease of Office Space to support Waste Isolation Plant activities CX(s) Applied: B1.24 Date: 03/25/2013 Location(s): New Mexico, New Mexico Offices(s): Carlsbad Field Office February 5, 2013 CX-010101: Categorical Exclusion Determination Department of Energy Grant for the City of Carlsbad Improvement of the Double Eagle Well Field CX(s) Applied: A9, B1.7, B1.18 Date: 02/05/2013 Location(s): New Mexico Offices(s): Carlsbad Field Office August 10, 2011 CX-006626: Categorical Exclusion Determination Removal of Standard Waste Box - WIPP

163

Increasing heavy oil reserves in the Wilmington Oil Field through advanced reservoir characterization and thermal production technologies. Annual report, March 30, 1995--March 31, 1996  

SciTech Connect

The objective of this project is to increase heavy oil reserves in a portion of the Wilmington Oil Field, near Long Beach, California, by implementing advanced reservoir characterization and thermal production technologies. Based on the knowledge and experience gained with this project, these technologies are intended to be extended to other sections of the Wilmington Oil Field, and, through technology transfer, will be available to increase heavy oil reserves in other slope and basin clastic (SBC) reservoirs. The project involves implementing thermal recovery in the southern half of the Fault Block II-A Tar zone. The existing steamflood in Fault Block II-A has been relatively inefficient due to several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery efficiency and reduce operating costs.

NONE

1997-09-01T23:59:59.000Z

164

Sequence stratigraphic interpretation methods for low-accommodation, alluvial depositional sequences: applications to reservoir characterization of Cut Bank field, Montana  

E-Print Network (OSTI)

In South Central Cut Bank Sand Unit (SCCBSU) of Cut Bank field, primary production and waterflood projects have resulted in recovery of only 29 % of the original oil in place from heterogeneous, fluvial sandstone deposits. Using highresolution sequence stratigraphy and geostatistical analysis, I developed a geologic model that may improve the ultimate recovery of oil from this field. In this study, I assessed sequence stratigraphic concepts for continental settings and extended the techniques to analyze low-accommodation alluvial systems of the Cut Bank and Sunburst members of the lower Kootenai formation (Cretaceous) in Cut Bank field. Identification and delineation of five sequences and their bounding surfaces led to a better understanding of the reservoir distribution and variability. Recognition of stacking patterns allowed for the prediction of reservoir rock quality. Within each systems tract, the best quality reservoir rocks are strongly concentrated in the lowstand systems tract. Erosional events associated with falling baselevel resulted in stacked, communicated (multistory) reservoirs. The lowermost Cut Bank sandstone has the highest reservoir quality and is a braided stream parasequence. Average net-to-gross ratio value (0.6) is greater than in other reservoir intervals. Little additional stratigraphically untapped oil is expected in the lowermost Cut Bank sandstone. Over most of the SCCBSU, the Sunburst and the upper Cut Bank strata are valley-fill complexes with interfluves that may laterally compartmentalize reservoir sands. Basal Sunburst sand (Sunburst 1, average net-to-gross ratio ~0.3) has better reservoir quality than other Sunburst or upper Cut Bank sands, but its reservoir quality is significantly less than that of lower Cut Bank sand. Geostatistical analysis provided equiprobable representations of the heterogeneity of reservoirs. Simulated reservoir geometries resulted in an improved description of reservoir distribution and connectivity, as well as occurrences of flow barriers. The models resulting from this study can be used to improve reservoir management and well placement and to predict reservoir performance in Cut Bank field. The technical approaches and tools from this study can be used to improve descriptions of other oil and gas reservoirs in similar depositional systems.

Ramazanova, Rahila

2006-12-01T23:59:59.000Z

165

High-resolution digital dosimetric system for spatial characterization of radiation fields using a thermoluminescent CaF2:Dy crystal  

SciTech Connect

A high-resolution digital dosimetric system has been developed for the spatial characterization of radiation fields. The system comprises the following: 0.5-mm-thick, 25-mm-diam CaF2:Dy thermoluminescent crystal; intensified charge coupled device video camera; video cassette recorder; and a computerized image processing subsystem. The optically flat single crystal is used as a radiation imaging device and the subsequent thermally stimulated phosphorescence is viewed by the intensified camera for further processing and analysis. Parameters governing the performance characteristics of the system were measured. A spatial resolution limit of 31 +/- 2 microns (1 sigma) corresponding to 16 +/- 1 line pairs/mm measured at the 4% level of the modulation transfer function has been achieved. The full width at half maximum of the line spread function measured independently by the slit method or derived from the edge response function was found to be 69 +/- 4 microns (1 sigma). The high resolving power, speed of readout, good precision, wide dynamic range, and the large image storage capacity make the system suitable for the digital mapping of the relative distribution of absorbed doses for various small radiation fields and the edges of larger fields.

Atari, N.A.; Svensson, G.K.

1986-05-01T23:59:59.000Z

166

Near-field characterization of hydrogen and helium operation on the TFTR (Tokamak Fusion Test Reactor) diagnostic neutral beam  

DOE Green Energy (OSTI)

An Optical Multichannel Analyzer has been used to measure beam divergence and composition. This measurement is usually performed near the center of the neutralizer or beyond the magnet. In the past, these locations suffered difficult beam composition analysis and low light intensity, respectively. It has been determined that the light emission is relatively independent of neutralizer line density in the near field, allowing near-field measurements to overcome both difficulties. At optimum perveance, but under conditions of high gas throughput, the helium 1/e-divergence angle was measured to be 1.5{degree}. Further investigation found that the divergence decreased with gas throughput down to 1.25{degree}. Mimimum divergences for the full-, half-, and third-energy hydrogen components were 1.1{degree}, 1.2{degree}, and 1.4{degree}, respectively. Relative neutral hydrogen particle fluxes available for injection into TFTR are a function of perveance. At maximum perveance, the full-, half-, and third-energy atom fractions were 0.25 {plus minus} 0.04, 0.5 {plus minus} 0.04, and 0.25 {plus minus} 0.05, respectively. 10 refs., 5 figs.

Kamperschroer, J.H.; Schilling, G.; Roquemore, A.L.

1990-07-01T23:59:59.000Z

167

Reservoir characterization of the upper Merecure and lower Oficina Formations sands in the Leona Este Field, Eastern Venezuela Basin  

E-Print Network (OSTI)

The "S5", "T" and "U1" sands, traditionally described as part of the lower section of the "Oficina" Formation, and the "U2" sand, as part of the upper interval of the "Merecure" Formation, contain the largest oil remaining reserves of the Leona Este Field, which is located in the southern portion of the Eastern Venezuela Basin. Two or more of these reservoir sands, which are interbedded with shales, have been simultaneously produced pursuing an increase in the oil production rate, but an unexpected production performance was obtained: the accelerated and early increase of the water volume associated to the produced oil has caused the shut down of some wells in the Leona Este Field. In order to understand this productive performance and to re-evaluate the hydrocarbon potential of the study interval, it is important to describe these reservoirs in terms of their depositional origin and trap formation. An integrated reservoir model was constructed using all the available geological, geophysical and production data. The hydrocarbon trapping mechanism of each studied stratigraphic interval, traditionally known as the "S5", "TU", "TL", "U1U", "U1L", "U2U", "U2MA", "U2MB" and "U2L" sands, includes two components: ? Stratigraphic component: each stratigraphic interval presents one or more reservoir zones composed by sandy deposits that fill belts of stacked tidal-fluvial channels in a SSE-NNW trending tide-dominated estuarine system. In most intervals, these contemporaneous-in-deposition reservoir zones are not connected due to the lateral variation of facies present in the tide-dominated estuary. ? Structural component: northward dipping strata have been offset by a W-E trending major normal fault and secondary normal faults striking parallel to the major one. The major fault is the southern seal of the hydrocarbon traps. The most important prospects of the study interval are the reservoir zones 1 and 2 of the "U1L" sand, the reservoir zone 3 of the "U2MB" sand, and the "U1U" sand, which show more than 15 feet of average net sand thickness, and contain the largest volume of recoverable oil per reservoir zone in the Leona Este Field.

Flores Millan, Maria Carolina

2001-01-01T23:59:59.000Z

168

Characterization of solution processed, p-doped films using hole-only devices and organic field-effect transistors  

Science Conference Proceedings (OSTI)

We report a solution-processed approach for a p-type doped hole transport layer in organic light emitting devices (OLEDs). UV-vis-NIR absorption spectra identified the charge transfer between the donor and acceptor in the solution processed doped films. Single carrier device and field-effect transistor were utilized as test vehicles to study the charge transport property and extract important parameters such as bulk mobile carrier concentration and mobility. OLEDs with p-type doped hole transport layer showed significant improvement in power efficiency up to 30% at the optimal doping ratio. This approach has the great potential to reduce the power consumption for OLED solid state lighting while lowering the cost and boosting the throughput of its manufacturing.

Swensen, James S.; Wang, Liang (Frank); Rainbolt, James E.; Koech, Phillip K.; Polikarpov, Evgueni; Gaspar, Daniel J.; Padmaperuma, Asanga B.

2012-12-01T23:59:59.000Z

169

Design and characterization of a spatially distributed multibeam field emission x-ray source for stationary digital breast tomosynthesis  

Science Conference Proceedings (OSTI)

Digital breast tomosynthesis (DBT) is a limited angle computed tomography technique that can distinguish tumors from its overlying breast tissues and has potentials for detection of cancers at a smaller size and earlier stage. Current prototype DBT scanners are based on the regular full-field digital mammography systems and require partial isocentric motion of an x-ray tube over certain angular range to record the projection views. This prolongs the scanning time and, in turn, degrades the imaging quality due to motion blur. To mitigate the above limitations, the concept of a stationary DBT (s-DBT) scanner has been recently proposed based on the newly developed spatially distributed multibeam field emission x-ray (MBFEX) source technique using the carbon nanotube. The purpose of this article is to evaluate the performance of the 25-beam MBFEX source array that has been designed and fabricated for the s-DBT system. The s-DBT system records all the projection images by electronically activating the multiple x-ray beams from different viewing angles without any mechanical motion. The configuration of the MBFEX source is close to the published values from the Siemens Mammomat system. The key issues including the x-ray flux, focal spot size, spatial resolution, scanning time, beam-to-beam consistency, and reliability are evaluated using the standard procedures. In this article, the authors describe the design and performance of a distributed x-ray source array specifically designed for the s-DBT system. They evaluate the emission current, current variation, lifetime, and focal spot sizes of the source array. An emission current of up to 18 mA was obtained at 0.5x0.3 mm effective focal spot size. The experimentally measured focal spot sizes are comparable to that of a typical commercial mammography tube without motion blurring. Trade-off between the system spatial resolution, x-ray flux, and scanning time are also discussed. Projection images of a breast phantom were collected using the x-ray source array from 25 different viewing angles without motion. These preliminary results demonstrate the feasibility of the proposed s-DBT scanner. The technology has the potential to increase the resolution and reduce the imaging time for DBT. With the present design of 25 views, they demonstrated experimentally the feasibility of achieving 11 s scanning time at full detector resolution with 0.5x0.3 mm source resolution without motion blur. The flexibility in configuration of the x-ray source array will also allow system designers to consider imaging geometries that are difficult to achieve with the conventional single-source rotating approach.

Qian Xin; Rajaram, Ramya; Calderon-Colon, Xiomara; Yang Guang; Phan, Tuyen; Lalush, David S.; Lu Jianping; Zhou, Otto [Department of Physics and Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States); Curriculum in Applied Sciences and Engineering, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States); Department of Physics and Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States); Department of Biomedical Engineering, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States); Department of Biomedical Engineering, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States) and Department of Biomedical Engineering, North Carolina State University, Raleigh, North Carolina 27659 (United States); Department of Physics and Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States) and Curriculum in Applied Sciences and Engineering, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States); Department of Physics and Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States); Curriculum in Applied Sciences and Engineering, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States) and Lineberger Comprehensive Cancer Center, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599 (United States)

2009-10-15T23:59:59.000Z

170

Design and characterization of 2.45 GHz electron cyclotron resonance plasma source with magnetron magnetic field configuration for high flux of hyperthermal neutral beam  

Science Conference Proceedings (OSTI)

A 2.45 GHz electron cyclotron resonance (ECR) source with a magnetron magnetic field configuration was developed to meet the demand of a hyperthermal neutral beam (HNB) flux on a substrate of more than 1x10{sup 15} cm{sup -2} s{sup -1} for industrial applications. The parameters of the operating pressure, ion density, electron temperature, and distance between the neutralization plate and the substrate for the HNB source are specified in a theoretical analysis. The electron temperature and the ion density are measured to characterize the ECR HNB source using a Langmuir probe and optical emission spectroscopy. The parameters of the ECR HNB source are in good agreement with the theoretically specified parameters.

Kim, Seong Bong [Department of Physics, Pohang University of Science and Technology, San 31, Hyoja-dong, Nam-gu, Pohang 790-784 (Korea, Republic of); Convergence Plasma Research Center, National Fusion Research Institute, Gwahangno 113, Yuseong-gu, Daejeon 305-333 (Korea, Republic of); Kim, Dae Chul; Yoo, Suk Jae [Convergence Plasma Research Center, National Fusion Research Institute, Gwahangno 113, Yuseong-gu, Daejeon 305-333 (Korea, Republic of); Namkung, Won; Cho, Moohyun [Department of Physics, Pohang University of Science and Technology, San 31, Hyoja-dong, Nam-gu, Pohang 790-784 (Korea, Republic of)

2010-08-15T23:59:59.000Z

171

Initial field testing definition of subsurface sealing and backfilling tests in unsaturated tuff; Yucca Mountain Site Characterization Project  

SciTech Connect

This report contains an initial definition of the field tests proposed for the Yucca Mountain Project repository sealing program. The tests are intended to resolve various performance and emplacement concerns. Examples of concerns to be addressed include achieving selected hydrologic and structural requirements for seals, removing portions of the shaft liner, excavating keyways, emplacing cementitious and earthen seals, reducing the impact of fines on the hydraulic conductivity of fractures, efficient grouting of fracture zones, sealing of exploratory boreholes, and controlling the flow of water by using engineered designs. Ten discrete tests are proposed to address these and other concerns. These tests are divided into two groups: Seal component tests and performance confirmation tests. The seal component tests are thorough small-scale in situ tests, the intermediate-scale borehole seal tests, the fracture grouting tests, the surface backfill tests, and the grouted rock mass tests. The seal system tests are the seepage control tests, the backfill tests, the bulkhead test in the Calico Hills unit, the large-scale shaft seal and shaft fill tests, and the remote borehole sealing tests. The tests are proposed to be performed in six discrete areas, including welded and non-welded environments, primarily located outside the potential repository area. The final selection of sealing tests will depend on the nature of the geologic and hydrologic conditions encountered during the development of the Exploratory Studies Facility and detailed numerical analyses. Tests are likely to be performed both before and after License Application.

Fernandez, J.A. [Sandia National Labs., Albuquerque, NM (United States); Case, J.B.; Tyburski, J.R. [I. T. Corp., Albuquerque, NM (United States)

1993-05-01T23:59:59.000Z

172

Increasing heavy oil reserves in the Wilmington Oil field through advanced reservoir characterization and thermal production technologies. Quarterly report, April 1, 1996--June 30, 1996  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., California using advanced reservoir characterization and thermal production technologies. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The technologies include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Hara, S.

1996-08-05T23:59:59.000Z

173

Increasing heavy oil reservers in the Wilmington oil Field through advanced reservoir characterization and thermal production technologies, technical progress report, October 1, 1996--December 31, 1996  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) 11-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Hara, S. [Tidelands Oil Production Co., Long Beach, CA (United States)], Casteel, J. [USDOE Bartlesville Project Office, OK (United States)

1997-05-11T23:59:59.000Z

174

Formation, characterization and dynamics of onion like carbon structures from nanodiamonds using reactive force-fields for electrical energy storage  

SciTech Connect

We simulate the experimentally observed graphitization of nanodiamonds into multi-shell onion-like carbon nanostructures, also called carbon onions, at different temperatures, using reactive force fields. The simulations include long-range Coulomb and van der Waals interactions. Our results suggest that long-range interactions play a crucial role in the phase-stability and the graphitization process. Graphitization is both enthalpically and entropically driven and can hence be controlled with temperature. The outer layers of the nanodiamond have a lower kinetic barrier toward graphitization irrespective of the size of the nanodiamond and graphitize within a few-hundred picoseconds, with a large volume increase. The inner core of the nanodiamonds displays a large size-dependent kinetic barrier, and graphitizes much more slowly with abrupt jumps in the internal energy. It eventually graphitizes by releasing pressure and expands once the outer shells have graphitized. The degree of transformation at a particular temperature is thereby determined by a delicate balance between the thermal energy, long-range interactions, and the entropic/enthalpic free energy gained by graphitization. Upon full graphitization, a multi-shell carbon nanostructure appears, with a shell-shell spacing of about {approx}3.4 {angstrom} for all sizes. The shells are highly defective with predominantly five- and seven-membered rings to curve space. Larger nanodiamonds with a diameter of 4 nm can graphitize into spiral structures with a large ({approx}29-atom carbon ring) pore opening on the outermost shell. Such a large one-way channel is most attractive for a controlled insertion of molecules/ions such as Li ions, water, or ionic liquids, for increased electrochemical capacitor or battery electrode applications.

Kent, Paul R [ORNL

2011-01-01T23:59:59.000Z

175

Class III Mid-Term Project, "Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies"  

Science Conference Proceedings (OSTI)

The overall objective of this project was to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involved improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective has been to transfer technology that can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The first budget period addressed several producibility problems in the Tar II-A and Tar V thermal recovery operations that are common in SBC reservoirs. A few of the advanced technologies developed include a three-dimensional (3-D) deterministic geologic model, a 3-D deterministic thermal reservoir simulation model to aid in reservoir management and subsequent post-steamflood development work, and a detailed study on the geochemical interactions between the steam and the formation rocks and fluids. State of the art operational work included drilling and performing a pilot steam injection and production project via four new horizontal wells (2 producers and 2 injectors), implementing a hot water alternating steam (WAS) drive pilot in the existing steamflood area to improve thermal efficiency, installing a 2400-foot insulated, subsurface harbor channel crossing to supply steam to an island location, testing a novel alkaline steam completion technique to control well sanding problems, and starting on an advanced reservoir management system through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation. The second budget period phase (BP2) continued to implement state-of-the-art operational work to optimize thermal recovery processes, improve well drilling and completion practices, and evaluate the geomechanical characteristics of the producing formations. The objectives were to further improve reservoir characterization of the heterogeneous turbidite sands, test the proficiency of the three-dimensional geologic and thermal reservoir simulation models, identify the high permeability thief zones to reduce water breakthrough and cycling, and analyze the nonuniform distribution of the remaining oil in place. This work resulted in the redevelopment of the Tar II-A and Tar V post-steamflood projects by drilling several new wells and converting idle wells to improve injection sweep efficiency and more effectively drain the remaining oil reserves. Reservoir management work included reducing water cuts, maintaining or increasing oil production, and evaluating and minimizing further thermal-related formation compaction. The BP2 project utilized all the tools and knowledge gained throughout the DOE project to maximize recovery of the oil in place.

Scott Hara

2007-03-31T23:59:59.000Z

176

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 2010 5, 2010 CX-000917: Categorical Exclusion Determination Ocean Thermal Energy Converter Life Cycle Cost Analysis Date: 02/25/2010 Location(s): Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 25, 2010 CX-000916: Categorical Exclusion Determination Ocean Thermal Extractable Energy Visualization CX(s) Applied: A9 Date: 02/25/2010 Location(s): Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 25, 2010 CX-000911: Categorical Exclusion Determination Austin Solar City Partnership - Lyndon B. Johnson High School CX(s) Applied: B5.1 Date: 02/25/2010 Location(s): Austin, Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 24, 2010 CX-000907: Categorical Exclusion Determination

177

Ground-water characterization field activities for 1995--1996 Laboratory for Energy-Related Health Research, University of California, Davis  

SciTech Connect

This report documents ground-water characterization field activities completed from August to December 1995 and in January 1996 at the Laboratory for Energy-Related Health Research (LEHR) in Davis, California. The ground water at LEHR is one of several operable units under investigation by Pacific Northwest National Laboratory for the US Department of Energy. The purpose of this work was to further characterize the hydrogeology beneath the LEHR site, with the primary focus on ground water. The objectives were to estimate hydraulic properties for the two uppermost saturated hydrogeologic units (i.e., HSU-1 and HSU-2), and to determine distributions of contaminants of concern in these units. Activities undertaken to accomplish these objectives include well installation, geophysical logging, well development, ground-water sampling, slug testing, Westbay ground-water monitoring system installation, continuous water-level monitoring, Hydropunch installation, and surveying. Ground-water samples were collected from 61 Hydropunch locations. Analytical results from these locations and the wells indicate high chloroform concentrations trending from west/southwest to east/northeast in the lower portion of HSU-1 and in the upper and middle portions of HSU-2. The chloroform appears to originate near Landfill 2. Tritium was not found above the MCL in any of the well or Hydropunch samples. Hexavalent chromium was found at four locations with concentrations above the MCL in HSU-1 and at one location in HSU-2. One well in HSU-1 had a total chromium concentration above the MCL. Nitrate-nitrogen above the MCL was found at several Hydropunch locations in both HSU-1 and HSU-2.

Liikala, T.L.; Lanigan, D.C.; Last, G.V. [and others

1996-05-01T23:59:59.000Z

178

APPLICATION OF A DAMPED LOCALLY OPTIMIZED COMBINATION OF IMAGES METHOD TO THE SPECTRAL CHARACTERIZATION OF FAINT COMPANIONS USING AN INTEGRAL FIELD SPECTROGRAPH  

Science Conference Proceedings (OSTI)

High-contrast imaging instruments are now being equipped with integral field spectrographs (IFSs) to facilitate the detection and characterization of faint substellar companions. Algorithms currently envisioned to handle IFS data, such as the Locally Optimized Combination of Images (LOCI) algorithm, rely on aggressive point-spread function (PSF) subtraction, which is ideal for initially identifying companions but results in significantly biased photometry and spectroscopy owing to unwanted mixing with residual starlight. This spectrophotometric issue is further complicated by the fact that algorithmic color response is a function of the companion's spectrum, making it difficult to calibrate the effects of the reduction without using iterations involving a series of injected synthetic companions. In this paper, we introduce a new PSF calibration method, which we call 'damped LOCI', that seeks to alleviate these concerns. By modifying the cost function that determines the weighting coefficients used to construct PSF reference images, and also forcing those coefficients to be positive, it is possible to extract companion spectra with a precision that is set by calibration of the instrument response and transmission of the atmosphere, and not by post-processing. We demonstrate the utility of this approach using on-sky data obtained with the Project 1640 IFS at Palomar. Damped LOCI does not require any iterations on the underlying spectral type of the companion, nor does it rely on priors involving the chromatic and statistical properties of speckles. It is a general technique that can readily be applied to other current and planned instruments that employ IFSs.

Pueyo, Laurent [Department of Physics and Astronomy, Johns Hopkins University, 366 Bloomberg Center, 3400 N. Charles Street, Baltimore, MD 21218 (United States); Crepp, Justin R.; Hinkley, Sasha; Hillenbrand, Lynne; Dekany, Richard; Bouchez, Antonin; Roberts, Jenny [California Institute of Technology, 1200 E. California Blvd., Pasadena, CA 91125 (United States); Vasisht, Gautam; Roberts, Lewis C.; Shao, Mike; Burruss, Rick [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States); Brenner, Douglas; Oppenheimer, Ben R.; Zimmerman, Neil [American Museum of Natural History, Central Park West at 79th Street, New York, NY 10024 (United States); Parry, Ian [Institute of Astronomy, University of Cambridge, Madingley Rd., Cambridge, CB3 0HA (United Kingdom); Beichman, Charles [NASA Exoplanet Science Institute, 770 S. Wilson Avenue, Pasadena, CA 91225 (United States); Soummer, Remi, E-mail: lap@pha.jhu.edu [Space Telescope Science Institute, 3700 San Marin Drive, Baltimore, MD 21218 (United States)

2012-03-01T23:59:59.000Z

179

THE BNL ASTD FIELD LAB - NEAR - REAL - TIME CHARACTERIZATION OF BNL STOCKPILED SOILS TO ACCELERATE COMPLETION OF THE EM CHEMICAL HOLES PROJECT.  

SciTech Connect

As of October 2001, approximately 7,000 yd{sup 3} of stockpiled soil remained at Brookhaven National Laboratory (BNL) after the remediation of the BNL Chemical/Animal/Glass Pits disposal area. The soils were originally contaminated with radioactive materials and heavy metals, depending on what materials had been interred in the pits, and how the pits were excavated. During the 1997 removal action, the more hazardous/radioactive materials were segregated, along with, chemical liquids and solids, animal carcasses, intact gas cylinders, and a large quantity of metal and glass debris. Nearly all of these materials have been disposed of. In order to ensure that all debris was removed and to characterize the large quantity of heterogeneous soil, BNL initiated an extended sorting, segregation, and characterization project directed at the remaining soil stockpiles. The project was co-funded by the Department of Energy Environmental Management Office (DOE EM) through the BNL Environmental Restoration program and through the DOE EM Office of Science and Technology Accelerated Site Technology Deployment (ASTD) program. The focus was to remove any non-conforming items, and to assure that mercury and radioactive contaminant levels were within acceptable limits for disposal as low-level radioactive waste. Soils with mercury concentrations above allowable levels would be separated for disposal as mixed waste. Sorting and segregation were conducted simultaneously. Large stockpiles (ranging from 150 to 1,200 yd{sup 3}) were subdivided into manageable 20 yd{sup 3} units after powered vibratory screening. The 1/2-inch screen removed almost all non-conforming items (plus some gravel). Non-conforming items were separated for further characterization. Soil that passed through the screen was also visually inspected before being moved to a 20 yd{sup 3} ''subpile.'' Eight samples from each subpile were collected after establishing a grid of four quadrants: north, east, south and west, and two layers: top and bottom. Field personnel collected eight 100-gram samples, plus quality assurance (QA) duplicates for chemical analysis, and a 1-liter jar of material for gamma spectroscopy. After analyses were completed and reviewed, the stockpiles were reconstructed for later disposal as discrete entities within a disposal site profile. A field lab was set up in a trailer close to the stockpile site, equipped with instrumentation to test for mercury, RCRA metals, and gamma spectroscopy, and a tumbler for carrying out a modified Toxicity Characteristic Leaching Procedure (TCLP) protocol. Chemical analysis included X-ray fluorescence (XRF) to screen for high (>260 ppm) total mercury concentrations, and modified TCLP tests to verify that the soils were not RCRA hazardous. The modified TCLP tests were 1/10th scale, to minimize secondary (leachate) waste and maximize tumbler capacity and sampler throughput. TCLP leachate analysis was accomplished using a Milestone Direct Mercury Analyzer (DMA80). Gamma spectroscopy provided added assurance of previously measured Am-241, Cs-137, and Co-60 contamination levels.

BOWERMAN,B.S.; ADAMS,J.W.; HEISER,J.; KALB,P.D.; LOCKWOOD,A.

2003-04-01T23:59:59.000Z

180

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2011 , 2011 CX-005377: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act -SIRTI -NuElement Bio Aviation Fuel Battery-Extender Auxiliary Power Unit Demonstration at Boeing Commercial Airplanes' System Concept Center CX(s) Applied: A9, B5.1 Date: 03/01/2011 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 28, 2011 CX-005376: Categorical Exclusion Determination Design and Implementation of Geothermal Energy Systems at West Chester University - 2 CX(s) Applied: A9, B5.1, B5.2 Date: 02/28/2011 Location(s): Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 28, 2011 CX-005375: Categorical Exclusion Determination Design and Implementation of Geothermal Energy Systems at West Chester

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 17, 2011 June 17, 2011 CX-006093: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Onesteel Grinding Systems - Steel Reheat Furnace Recuperator Energy Efficiency Retrofit CX(s) Applied: B3.6, B5.1 Date: 06/17/2011 Location(s): Kansas City, Missouri Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 17, 2011 CX-006090: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Mississippi Lime - Variable Frequency Drive and Fan Upgrade at Peerless Plant CX(s) Applied: B3.6, B5.1 Date: 06/17/2011 Location(s): St. Genevieve, Missouri Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 17, 2011 CX-006086: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Elantas PDG Inc. -

182

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15, 2010 15, 2010 CX-001596: Categorical Exclusion Determination Recovery Act: County of Greenville, South Carolina (SC) Energy Efficiency and Conservation Block Grant (EECBG) American Recovery and Reinvestment Act (AARA)-EECBG CX(s) Applied: B5.1 Date: 04/15/2010 Location(s): County of Greenville, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001590: Categorical Exclusion Determination Pennsylvania State, Ground Mount Solar System - American Recovery and Reinvestment Act (ARRA) - Energy Efficiency and Conservation Block Grant (EECBG) CX(s) Applied: A9, A11, B5.1 Date: 04/15/2010 Location(s): Bucks County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001588: Categorical Exclusion Determination

183

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

26, 2011 26, 2011 CX-006025: Categorical Exclusion Determination Regional Biomass Feedstock Partnership CX(s) Applied: B3.8, B5.1 Date: 05/26/2011 Location(s): Champaign County, South Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2011 CX-006022: Categorical Exclusion Determination Oregon State University Cascades Campus Ground Source Heat Pump Project CX(s) Applied: B5.1 Date: 05/26/2011 Location(s): Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2011 CX-006004: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant/American Recovery and Reinvestment Act: Akron City Activity 1 Community Business and Non-Profit Energy Efficiency Grant Program and Activity 12 Energy Efficient Solar

184

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2010 1, 2010 CX-001562: Categorical Exclusion Determination City of Omaha Statement of Work National Environmental Policy Act Template CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Omaha, Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001561: Categorical Exclusion Determination Solar Light-Emitting Diode Street Lights for Phase 1A Downtown Greenway- American Recovery and Reinvestment Act Energy Efficiency and Conservation Block Grant Strategy Only CX(s) Applied: B5.1 Date: 03/31/2010 Location(s): Greensboro, North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001560: Categorical Exclusion Determination Hydroelectric turbine at Water Treatment Plant American Recovery and

185

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2010 9, 2010 CX-001958: Categorical Exclusion Determination Utah State Energy Program (SEP) American Recovery and Reinvestment Act (ARRA) - Competitive Grants for Renewable Energy CX(s) Applied: A1, B5.1 Date: 02/19/2010 Location(s): Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 19, 2010 CX-001076: Categorical Exclusion Determination Indiana State American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant (T) CX(s) Applied: A9, A11, B5.1 Date: 02/19/2010 Location(s): Indiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 19, 2010 CX-001113: Categorical Exclusion Determination State of Wisconsin American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant (T)

186

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 7, 2010 June 7, 2010 CX-002683: Categorical Exclusion Determination Cincinnati City American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant Act 4 (Ohio River Trail - Corbin to Collins) CX(s) Applied: A9, A11, B5.1 Date: 06/07/2010 Location(s): Cincinnati, Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 7, 2010 CX-002678: Categorical Exclusion Determination South District County Waster and Sewer Department - lnstallation of Co-Generation Units 4 & 5 and Landfill Gas Pipeline Construction CX(s) Applied: B5.1 Date: 06/07/2010 Location(s): Miami-Dade County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 3, 2010 CX-002453: Categorical Exclusion Determination Commercialization of New Lattice Matched Multi-Junction; National Renewable

187

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

20, 2010 20, 2010 CX-002046: Categorical Exclusion Determination Chester County (Pennsylvania): Chester Valley Trail Extension - American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant CX(s) Applied: B5.1 Date: 04/20/2010 Location(s): Chester County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 20, 2010 CX-002045: Categorical Exclusion Determination Oregon Energy Efficiency and Conservation Block Grant: Video Conferencing CX(s) Applied: B1.7, B5.1 Date: 04/20/2010 Location(s): Lakeview County, Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 20, 2010 CX-002043: Categorical Exclusion Determination Ohio State American Recovery and Reinvestment Act - Energy Efficiency and

188

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30, 2010 30, 2010 CX-003506: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act: Quantum Solar Photovoltaic Module Manufacturing Plant CX(s) Applied: B5.1 Date: 08/30/2010 Location(s): Irvine, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 30, 2010 CX-003505: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act: Calisolar's Solar Manufacturing Capacity Expansion CX(s) Applied: B1.31, B5.1 Date: 08/30/2010 Location(s): Sunnyvale, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 30, 2010 CX-003860: Categorical Exclusion Determination State Energy Program (SEP) American Recovery and Reinvestment Act (ARRA)

189

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 30, 2010 September 30, 2010 CX-004033: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Carver Ground-Mounted Solar Photovoltaic CX(s) Applied: B5.1 Date: 09/30/2010 Location(s): Carver, Massachusetts Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 30, 2010 CX-004011: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Energy Efficient Programs for Small Cities and Counties: 50 Kilowatt Wind Turbine to Power City of Burdette Facilities CX(s) Applied: B5.1 Date: 09/30/2010 Location(s): Burdette, Arkansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2010 CX-004094: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Washington Stewart

190

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0, 2010 0, 2010 CX-001741: Categorical Exclusion Determination Pennsylvania Conservation Works - Geothermal Systems - American Recovery and Reinvestment Act-Energy Efficiency and Conservation Block Grant CX(s) Applied: B5.1 Date: 03/30/2010 Location(s): Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 30, 2010 CX-001740: Categorical Exclusion Determination Berks County, Pennsylvania, Boiler Plant Improvements - American Recovery and Reinvestment Act-Energy Efficiency and Conservation Block Grant CX(s) Applied: B2.5, B5.1 Date: 03/30/2010 Location(s): Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 30, 2010 CX-001583: Categorical Exclusion Determination Dynamic Energy Consumption Management of Routing Telecom and Data Centers

191

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2010 1, 2010 CX-002359: Categorical Exclusion Determination Validation of Innovative Exploration Technologies at the Colado, Nevada, Geothermal Prospect CX(s) Applied: B3.1, A9 Date: 05/11/2010 Location(s): Colado, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 10, 2010 CX-002368: Categorical Exclusion Determination Puget Sound Tidal Energy Demonstration Project: Environmental and Permitting Activities CX(s) Applied: B3.1, B3.3, A9 Date: 05/10/2010 Location(s): Puget Sound, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 10, 2010 CX-002284: Categorical Exclusion Determination Environmental Effects of Sediment Transport Alteration and Impacts on Protected Species: Edgartown Tidal Energy Project

192

An Advanced Fracture Characterization and Well Path Navigation System for Effective Re-Development and Enhancement of Ultimate Recovery from the Complex Monterey Reservoir of South Ellwood Field, Offshore California  

Science Conference Proceedings (OSTI)

Venoco Inc, intends to re-develop the Monterey Formation, a Class III basin reservoir, at South Ellwood Field, Offshore Santa Barbara, California. Well productivity in this field varies significantly. Cumulative Monterey production for individual wells has ranged from 260 STB to 8,700,000 STB. Productivity is primarily affected by how well the well path connects with the local fracture system and the degree of aquifer support. Cumulative oil recovery to date is a small percentage of the original oil in place. To embark upon successful re-development and to optimize reservoir management, Venoco intends to investigate, map and characterize field fracture patterns and the reservoir conduit system. State of the art borehole imaging technologies including FMI, dipole sonic and cross-well seismic, interference tests and production logs will be employed to characterize fractures and micro faults. These data along with the existing database will be used for construction of a novel geologic model of the fracture network. Development of an innovative fracture network reservoir simulator is proposed to monitor and manage the aquifer's role in pressure maintenance and water production. The new fracture simulation model will be used for both planning optimal paths for new wells and improving ultimate recovery. In the second phase of this project, the model will be used for the design of a pilot program for downhole water re-injection into the aquifer simultaneously with oil production. Downhole water separation units attached to electric submersible pumps will be used to minimize surface fluid handling thereby improving recoveries per well and field economics while maintaining aquifer support. In cooperation with the DOE, results of the field studies as well as the new models developed and the fracture database will be shared with other operators. Numerous fields producing from the Monterey and analogous fractured reservoirs both onshore and offshore will benefit from the methodologies developed in this project. This report presents a summary of all technical work conducted during the ninth quarter of Budget Period II.

Steve Horner

2006-01-31T23:59:59.000Z

193

Evaluation of Electric Field Exposure Assessment Methods  

Science Conference Proceedings (OSTI)

This evaluation of electric field exposure assessment methods highlights a renewed interest in characterizing electric field exposures and their attendant perceptible nuisance shocks.

2008-09-26T23:59:59.000Z

194

Site Characterization Awards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Centers Field Sites Power Marketing Administration Other Agencies You are here Home Site Characterization Awards Site Characterization Awards A description of...

195

Field Test Report: Preliminary Aquifer Test Characterization Results for Well 299-W15-225: Supporting Phase I of the 200-ZP-1 Groundwater Operable Unit Remedial Design  

SciTech Connect

This report examines the hydrologic test results for both local vertical profile characterization and large-scale hydrologic tests associated with a new extraction well (well 299-W15-225) that was constructed during FY2009 for inclusion within the future 200-West Area Groundwater Treatment System that is scheduled to go on-line at the end of FY2011. To facilitate the analysis of the large-scale hydrologic test performed at newly constructed extraction well 299-W15-225 (C7017; also referred to as EW-1 in some planning documents), the existing 200-ZP-1 interim pump-and-treat system was completely shut-down ~1 month before the performance of the large-scale hydrologic test. Specifically, this report 1) applies recently developed methods for removing barometric pressure fluctuations from well water-level measurements to enhance the detection of hydrologic test and pump-and-treat system effects at selected monitor wells, 2) analyzes the barometric-corrected well water-level responses for a preliminary determination of large-scale hydraulic properties, and 3) provides an assessment of the vertical distribution of hydraulic conductivity in the vicinity of newly constructed extraction well 299-W15-225. The hydrologic characterization approach presented in this report is expected to have universal application for meeting the characterization needs at other remedial action sites located within unconfined and confined aquifer systems.

Spane, Frank A.; Newcomer, Darrell R.

2009-09-23T23:59:59.000Z

196

Fabrication and characterization of sub-500nm channel organic field effect transistor using UV nanoimprint lithography with cheap Si-mold  

Science Conference Proceedings (OSTI)

P-type poly (3-hexylthiophene) (P3HT) organic field effect transistors (OFETs) with channel length down to 500nm were fabricated. The gold source and drain electrodes were patterned using UV-based nanoimprint lithography and a lift-off process. To reduce ... Keywords: Lift-off process, Opaque Si-mold, Organic transistor, Short channel effect, UV-nanoimprint lithography

Lichao Teng; Robert Kirchner; Matthias PlTner; Alexander TRke; Andreas Jahn; Jian He; Falk Hagemann; Wolf-Joachim Fischer

2012-09-01T23:59:59.000Z

197

AN ADVANCED FRACTURE CHARACTERIZATION AND WELL PATH NAVIGATION SYSTEM FOR EFFECTIVE RE-DEVELOPMENT AND ENHANCEMENT OF ULTIMATE RECOVERY FROM THE COMPLEX MONTEREY RESERVOIR OF SOUTH ELLWOOD FIELD, OFFSHORE CALIFORNIA  

SciTech Connect

Venoco Inc, intends to re-develop the Monterey Formation, a Class III basin reservoir, at South Ellwood Field, Offshore Santa Barbara, California. Well productivity in this field varies significantly. Cumulative Monterey production for individual wells has ranged from 260 STB to 8,700,000 STB. Productivity is primarily affected by how well the well path connects with the local fracture system and the degree of aquifer support. Cumulative oil recovery to date is a small percentage of the original oil in place. To embark upon successful re-development and to optimize reservoir management, Venoco intends to investigate, map and characterize field fracture patterns and the reservoir conduit system. State of the art borehole imaging technologies including FMI, dipole sonic and cross-well seismic, interference tests and production logs will be employed to characterize fractures and micro faults. These data along with the existing database will be used for construction of a novel geologic model of the fracture network. Development of an innovative fracture network reservoir simulator is proposed to monitor and manage the aquifer's role in pressure maintenance and water production. The new fracture simulation model will be used for both planning optimal paths for new wells and improving ultimate recovery. In the second phase of this project, the model will be used for the design of a pilot program for downhole water re-injection into the aquifer simultaneously with oil production. Downhole water separation units attached to electric submersible pumps will be used to minimize surface fluid handling thereby improving recoveries per well and field economics while maintaining aquifer support. In cooperation with the DOE, results of the field studies as well as the new models developed and the fracture database will be shared with other operators. Numerous fields producing from the Monterey and analogous fractured reservoirs both onshore and offshore will benefit from the methodologies developed in this project. This report presents a summary of all technical work conducted during the fifth quarter of Budget Period II.

Steve Horner

2005-01-31T23:59:59.000Z

198

Final report on the Background Soil Characterization Project at the Oak Ridge Reservation, Oak Ridge, Tennessee. Volume 1: Results of Field Sampling Program  

Science Conference Proceedings (OSTI)

This report presents, evaluates, and documents data and results obtained in the Background Soil Characterization Project (BSCP). It is intended to be a stand-alone document for application and use in structuring and conducting remedial investigation and remedial action projects in the Environmental Restoration (ER) Program. The objectives of the BSCP consist of the following: determine background concentrations of organics, metals, and radionuclides in natural soils that are key to environmental restoration projects; provide remediation projects with 100% validated data on background concentrations, which are technically and legally defensible; and quantify baseline risks from background constituents for comparison of risks associated with contaminated sites.

Watkins, D.R.; Ammons, J.T.; Branson, J.L. [and others

1993-10-01T23:59:59.000Z

199

High resolution sequence stratigraphic and reservoir characterization studies of D-07, D-08 and E-01 sands, Block 2 Meren field, offshore Niger Delta  

E-Print Network (OSTI)

Meren field, located offshore Niger Delta, is one of the most prolific oil-producing fields in the Niger Delta. The upper Miocene D-07, D-08 and E-01 oil sands comprise a series of stacked hydrocarbon reservoirs in Block 2 of Meren field. These reservoir sandstones were deposited in offshore to upper shoreface environments. Seven depositional facies were identified in the studied interval, each with distinct lithology, sedimentary structures, trace fossils, and wire-line log character. The dominant lithofacies are (1) locally calcite-cemented highly-bioturbated, fine-grained sandstones, (middle to lower shoreface facies); (2) cross-bedded, fine- to medium-grained well-sorted sandstones (upper shoreface facies); (3) horizontal to sub-horizontal laminated, very-fine- to fine-grained sandstone (delta front facies); (4) massive very-fine- to fine-grained poorly-sorted sandstone (delta front facies); (5) muddy silt- to fine-grained wavy-bedded sandstone (lower shoreface facies); (6) very-fine- to fine-grained sandy mudstone (lower shoreface facies); and (7) massive, silty shales (offshore marine facies). Lithofacies have distinct mean petrophysical properties, although there is overlap in the range of values. The highest quality reservoir deposits are cross-bedded sands that were deposited in high-energy upper shoreface environments. Calcite cements in lower shoreface facies significantly reduce porosity and permeability. Integration of core and wire-line log data allowed porosity and permeability to be empirically determined from bulk density. The derived equation indicated that bulk density values could predict 80% of the variance in core porosity and permeability values. Three parasequence sets were interpreted, including one lower progradational and two upper retrogradational parasequence sets. The progradational parasequence set consists of upward-coarsening delta front to upper shoreface facies, whereas the upward-fining retrogradational parasequence sets are composed of middle to lower shoreface deposits overlain by offshore marine shales. The limited amount of core data and the relatively small area of investigation place serious constraints on stratigraphic interpretations. Two possible sequence stratigraphic interpretations are presented. The first interpretation suggests the deposits comprise a highstand systems tract overlain by a transgressive systems tract. A lowstand systems tract is restricted to an incised valley fill at the southeastern end of the study area. The alternate interpretation suggests the deposits comprise a falling stage systems tract overlain by transgressive systems tract.

Esan, Adegbenga Oluwafemi

2002-12-01T23:59:59.000Z

200

Coal liquefaction process streams characterization and evaluation. Characterization of coal-derived materials by field desorption mass spectrometry, two-dimensional nuclear magnetic resonance, supercritical fluid extraction, and supercritical fluid chromatography/mass spectrometry  

SciTech Connect

Under contract from the DOE , and in association with CONSOL Inc., Battelle, Pacific Northwest Laboratory (PNL) evaluated four principal and several complementary techniques for the analysis of non-distillable direct coal liquefaction materials in support of process development. Field desorption mass spectrometry (FDMS) and nuclear magnetic resonance (NMR) spectroscopic methods were examined for potential usefulness as techniques to elucidate the chemical structure of residual (nondistillable) direct coal liquefaction derived materials. Supercritical fluid extraction (SFE) and supercritical fluid chromatography/mass spectrometry (SFC/MS) were evaluated for effectiveness in compound-class separation and identification of residual materials. Liquid chromatography (including microcolumn) separation techniques, gas chromatography/mass spectrometry (GC/MS), mass spectrometry/mass spectrometry (MS/MS), and GC/Fourier transform infrared (FTIR) spectroscopy methods were applied to supercritical fluid extracts. The full report authored by the PNL researchers is presented here. The following assessment briefly highlights the major findings of the project, and evaluates the potential of the methods for application to coal liquefaction materials. These results will be incorporated by CONSOL into a general overview of the application of novel analytical techniques to coal-derived materials at the conclusion of CONSOL`s contract.

Campbell, J.A.; Linehan, J.C.; Robins, W.H. [Battelle Pacific Northwest Lab., Richland, WA (United States)

1992-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Residential Transient Magnetic Field Research  

Science Conference Proceedings (OSTI)

Residential populations are exposed, in some measure, to transient magnetic fields. Such fields result from virtually all electric and electronic switching operations that may occur within the residence or external to the residence. This report presents the first phase of a study to better characterize these fields and, ultimately, describe their relationship to utility wiring configurations.

1994-03-01T23:59:59.000Z

202

The University of Minnesota aquifer thermal energy storage (ATES) field test facility -- system description, aquifer characterization, and results of short-term test cycles  

DOE Green Energy (OSTI)

Phase 1 of the Aquifer Thermal Energy Storage (ATES) Project at the University of Minnesota was to test the feasibility, and model, the ATES concept at temperatures above 100{degrees}C using a confined aquifer for the storage and recovery of hot water. Phase 1 included design, construction, and operation of a 5-MW thermal input/output field test facility (FTF) for four short-term ATES cycles (8 days each of heat injection, storage, and heat recover). Phase 1 was conducted from May 1980 to December 1983. This report describes the FTF, the Franconia-Ironton-Galesville (FIG) aquifer used for the test, and the four short-term ATES cycles. Heat recovery; operational experience; and thermal, chemical, hydrologic, and geologic effects are all included. The FTF consists of monitoring wells and the source and storage well doublet completed in the FIG aquifer with heat exchangers and a fixed-bed precipitator between the wells of the doublet. The FIG aquifer is highly layered and a really anisotropic. The upper Franconia and Ironton-Galesville parts of the aquifer, those parts screened, have hydraulic conductivities of {approximately}0.6 and {approximately}1.0 m/d, respectively. Primary ions in the ambient ground water are calcium and magnesium bicarbonate. Ambient temperature FIG ground water is saturated with respect to calcium/magnesium bicarbonate. Heating the ground water caused most of the dissolved calcium to precipitate out as calcium carbonate in the heat exchanger and precipitator. Silica, calcium, and magnesium were significantly higher in recovered water than in injected water, suggesting dissolution of some constituents of the aquifer during the cycles. Further work on the ground water chemistry is required to understand water-rock interactions.

Walton, M.; Hoyer, M.C.; Eisenreich, S.J.; Holm, N.L.; Holm, T.R.; Kanivetsky, R.; Jirsa, M.A.; Lee, H.C.; Lauer, J.L.; Miller, R.T.; Norton, J.L.; Runke, H. (Minnesota Geological Survey, St. Paul, MN (United States))

1991-06-01T23:59:59.000Z

203

Categorical Exclusion Determinations: Golden Field Office | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-003201: Categorical Exclusion Determination Baseload Nitrate Salt Central Receiver Power Plant Design CX(s) Applied: A9 Date: 08042010 Location(s): Colorado Office(s):...

204

Categorical Exclusion Determinations: Golden Field Office | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

16, 2010 CX-003701: Categorical Exclusion Determination Bio-Diesel Cellulosic Ethanol Research Project CX(s) Applied: A9 Date: 09162010 Location(s): Hendry County, Florida...

205

Categorical Exclusion Determinations: Golden Field Office | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Control System for Buoyancy Stabilized Offshore Wind Turbine CX(s) Applied: A9, A11 Date: 12202011 Location(s): Delaware Offices(s):...

206

Field Asymmetric Ion Mobility Spectrometry (FAIMS ...  

Summary. Field asymmetric Ion mobility spectrometry (FAIMS), wherein ions are separated and/or characterized by differences in their mobility in high ...

207

Mechanical and Biological Characterization of Dense ...  

Science Conference Proceedings (OSTI)

... Characterization of Dense Nanocrystalline HA Consolidated by Field-Assisted Sintering. Author(s), Tien Bich Tran, James F. Shackelford, Joanna R. Groza.

208

Categorical Exclusion Determinations: Golden Field Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0, 2010 0, 2010 CX-001090: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - State of New York American Recovery and Reinvestment Act (T) CX(s) Applied: A9, A11, B5.1 Date: 02/10/2010 Location(s): New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 10, 2010 CX-001101: Categorical Exclusion Determination Luzerne County (Pennsylvania), EECS, All Activities - American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant (S) Date: 02/10/2010 Location(s): Luzerne County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 10, 2010 CX-001938: Categorical Exclusion Determination Renewable Energy Enterprise Zones (REEZ) Boise County Woody Biomass

209

Gas Explosion Characterization, Wave Propagation  

E-Print Network (OSTI)

of nuclear power plants. However, an evi- dent lack of knowledge in the field had demanded for a detaileds & Dt^boooo^j Risø-R-525 Gas Explosion Characterization, Wave Propagation (Small-Scale Experiments EXPLOSION CHARACTERIZATION, WAVE PROPAGATION (Small-Scale Experiments) G.C. Larsen Abstract. A number

210

A quantitative analysis of the flame produced by a gas-fueled propellant simulating burner including: soot field characterization, temperature diagnostic techniques, spectral analysis, heat flux, and aluminum particle combustion.  

E-Print Network (OSTI)

??This study details the characterization and implementation of a burner devised to simulate solid propellant fires. The burner is designed with the ability to introduce (more)

Jackson, Matt

2007-01-01T23:59:59.000Z

211

CX-010257: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Characterizing Fracture Properties Using Resistivity measured at Different Frequencies CX(s) Applied: A9, B3.6 Date: 04/03/2013 Location(s): California Offices(s): Golden Field Office

212

CX-009330: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization CX(s) Applied: A9, B3.16 Date: 09/27/2012 Location(s): Alaska Offices(s): National Energy Technology Laboratory

213

CX-009329: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization CX(s) Applied: A9, B3.16 Date: 09/27/2012 Location(s): Alaska Offices(s): National Energy Technology Laboratory

214

CX-009327: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization CX(s) Applied: A9 Date: 09/27/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

215

Categorical Exclusion Determinations: Golden Field Office | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2010 CX-001719: Categorical Exclusion Determination Solar for Schools CX(s) Applied: A9, B5.1 Date: 04192010 Location(s): Austin, Texas Office(s): Energy Efficiency and...

216

Categorical Exclusion Determinations: Golden Field Office | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program American Recovery and Reinvestment Act REEZ Nampa Wastewater Treatment Plant Biogas Boiler Project CX(s) Applied: B5.1 Date: 07082010 Location(s): Nampa, Idaho...

217

Structural Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Characterization and Comparison of Switchgrass Ball-milled Lignin Before and After Dilute Acid Pretreatment Reichel Samuel & Yunqiao Pu & Babu Raman & Arthur J. Ragauskas Received: 25 April 2009 / Accepted: 10 August 2009 # Humana Press 2009 Abstract To reduce the recalcitrance and enhance enzymatic activity, dilute H 2 SO 4 pretreatment was carried out on Alamo switchgrass (Panicum virgatum). Ball-milled lignin was isolated from switchgrass before and after pretreatment. Its structure was characterized by 13 C, HSQC, and 31 P NMR spectroscopy. It was confirmed that ball-milled switchgrass lignin is of HGS type with a considerable amount of p-coumarate and felurate esters of lignin. The major ball-milled lignin interunit was the β-O-4 linkage, and a minor amount of phenylcoumarin, resinol, and spirodienone units were also present. As a result of the acid pretreatment,

218

Threat Characterization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Michalski Michalski SNL Department 5621 Threat Characterization Summary Slide: Threat Characterization Outcomes: Develop a network analysis toolset to allow an analyst to efficiently "crawl" large data sets to discover relevant threat information. Road Map Challenges:"The ability to discover & understand emerging threats and vulnerabilities is a prerequisite to developing effective countermeasures" Major Successes: * Implemented prototype front end crawler and semantic analysis engine (Sandia National Labs). * Transition Development work to the Institute for Complex Additive System Analysis (ICASA) Center (NMTech) * Quarterly threat reports being produced  Schedule: Improvements to both the analyst process and GUI Interface, 4Q 2009; Transition maintenance and development to

219

Use Of Electrical Surveys For Geothermal Reservoir Characterization...  

Open Energy Info (EERE)

Use Of Electrical Surveys For Geothermal Reservoir Characterization- Beowawe Geothermal Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Use Of...

220

Conformal vector fields on Finsler manifolds  

E-Print Network (OSTI)

Applying concepts and tools from classical tangent bundle geometry and using the apparatus of the calculus along the tangent bundle projection ('pull-back formalism'), first we enrich the known lists of the characterizations of affine vector fields on a spray manifold and conformal vector fields on a Finsler manifold. Second, we deduce consequences on vector fields on the underlying manifold of a Finsler structure having one or two of the mentioned geometric properties.

Szilasi, Jzsef

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Electromagnetic fields in cased borehole  

DOE Green Energy (OSTI)

Borehole electromagnetic (EM) measurements, using fiberglass-cased boreholes, have proven useful in oil field reservoir characterization and process monitoring (Wilt et al., 1995). It has been presumed that these measurements would be impossible in steel-cased wells due to the very large EM attenuation and phase shifts. Recent laboratory and field studies have indicated that detection of EM signals through steel casing should be possible at low frequencies, and that these data provide a reasonable conductivity image at a useful scale. Thus, we see an increased application of this technique to mature oilfields, and an immediate extension to geothermal industry as well. Along with the field experiments numerical model studies have been carried out for analyzing the effect of steel casing to the EM fields. The model used to be an infinitely long uniform casing embedded in a homogeneous whole space. Nevertheless, the results indicated that the formation signal could be accurately recovered if the casing characteristics were independently known (Becker et al., 1998; Lee el al., 1998). Real steel-cased wells are much more complex than the simple laboratory models used in work to date. The purpose of this study is to develop efficient numerical methods for analyzing EM fields in realistic settings, and to evaluate the potential application of EM technologies to cross-borehole and single-hole environment for reservoir characterization and monitoring.

Lee, Ki Ha; Kim, Hee Joon; Uchida, Toshihiro

2001-07-20T23:59:59.000Z

222

Microbial field pilot study  

Science Conference Proceedings (OSTI)

The objective of this project is to perform a microbial enhanced oil recovery field pilot in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate reducing bacteria will be stimulated to selectively plug flow paths which have been referentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. This report covers progress made during the second year, January 1, 1990 to December 31, 1990, of the Microbial Field Pilot Study project. Information on reservoir ecology, surface facilities design, operation of the unit, core experiments, modeling of microbial processes, and reservoir characterization and simulation are presented in the report. To better understand the ecology of the target reservoir, additional analyses of the fluids which support bacteriological growth and the microbiology of the reservoir were performed. The results of the produced and injected water analysis show increasing sulfide concentrations with respect to time. In March of 1990 Mesa Limited Partnership sold their interest in the SEVVSU to Sullivan and Company. In April, Sullivan and Company assumed operation of the field. The facilities for the field operation of the pilot were refined and implementation was begun. Core flood experiments conducted during the last year were used to help define possible mechanisms involved in microbial enhanced oil recovery. The experiments were performed at SEVVSU temperature using fluids and inoculum from the unit. The model described in last year`s report was further validated using results from a core flood experiment. The model was able to simulate the results of one of the core flood experiments with good quality.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Chisholm, J.L.

1992-03-01T23:59:59.000Z

223

Microbial field pilot study  

Science Conference Proceedings (OSTI)

The objective of this project is to perform a microbial enhanced oil recovery field pilot in the Southeast Vassar Vertz Sand Unit (SEVVSU) in Payne County, Oklahoma. Indigenous, anaerobic, nitrate reducing bacteria will be stimulated to selectively plug flow paths which have been referentially swept by a prior waterflood. This will force future flood water to invade bypassed regions of the reservoir and increase sweep efficiency. This report covers progress made during the second year, January 1, 1990 to December 31, 1990, of the Microbial Field Pilot Study project. Information on reservoir ecology, surface facilities design, operation of the unit, core experiments, modeling of microbial processes, and reservoir characterization and simulation are presented in the report. To better understand the ecology of the target reservoir, additional analyses of the fluids which support bacteriological growth and the microbiology of the reservoir were performed. The results of the produced and injected water analysis show increasing sulfide concentrations with respect to time. In March of 1990 Mesa Limited Partnership sold their interest in the SEVVSU to Sullivan and Company. In April, Sullivan and Company assumed operation of the field. The facilities for the field operation of the pilot were refined and implementation was begun. Core flood experiments conducted during the last year were used to help define possible mechanisms involved in microbial enhanced oil recovery. The experiments were performed at SEVVSU temperature using fluids and inoculum from the unit. The model described in last year's report was further validated using results from a core flood experiment. The model was able to simulate the results of one of the core flood experiments with good quality.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Chisholm, J.L.

1992-03-01T23:59:59.000Z

224

High Field Magnetic Resonance Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

HFMRF Overview HFMRF Overview Section 2-3-1 High Field Magnetic Resonance Facility The High Field Magnetic Resonance Facility (HFMRF) focuses a significant portion of its research on developing a fundamental, molecular-level understanding of biochemical and biological systems and their response to environmental effects. A secondary focus is materials science, including catalysis and chemical mechanisms and processes. Staff and science consultants within this facility offer expertise in the areas of structural biology, solid-state materials characterization, and magnetic resonance imaging (MRI) techniques. Research activities in the HFMRF include: * structure determination of large molecular assemblies such as protein-DNA (normal and damaged DNA) and protein-RNA complexes

225

ARM - Field Campaign - Precision Gas Sampling (PGS) Validation Field  

NLE Websites -- All DOE Office Websites (Extended Search)

govCampaignsPrecision Gas Sampling (PGS) Validation Field Campaign govCampaignsPrecision Gas Sampling (PGS) Validation Field Campaign Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : Precision Gas Sampling (PGS) Validation Field Campaign 2004.04.15 - 2004.12.15 Lead Scientist : Marc Fischer For data sets, see below. Description Accurate prediction of the regional responses of CO2 flux to changing climate, land use, and management requires models that are parameterized and tested against measurements made in multiple land cover types and over seasonal to inter-annual time scales. Models predicting fluxes for un-irrigated agriculture were posed with the challenge of characterizing the onset and severity of plant water stress. We conducted a study that quantified the spatial heterogeneity and temporal variations in land

226

NMR Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

NMR NMR Characterization of C3H and HCT Down-Regulated Alfalfa Lignin Yunqiao Pu & Fang Chen & Angela Ziebell & Brian H. Davison & Arthur J. Ragauskas Published online: 20 October 2009 # Springer Science + Business Media, LLC. 2009 Abstract Independent down-regulation of genes encoding p-coumarate 3-hydroxylase (C3H) and hydroxycinnamoyl CoA:shikimate/quinate hydroxycinnamoyl transferase (HCT) has been previously shown to reduce the recalcitrance of alfalfa and thereby improve the release of fermentable sugars during enzymatic hydrolysis. In this study, ball-milled lignins were isolated from wild-type control, C3H, and HCT gene down-regulated alfalfa plants. One- and two-dimensional nuclear magnetic resonance (NMR) techniques were utilized to determine structural changes in the ball-milled alfalfa lignins resulting from this genetic engineering.

227

NREL: Water Power Research - Resource Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Characterization Resource Characterization Building on its success in wind resource characterization and assessment, the National Renewable Energy Laboratory (NREL) has extended its capabilities to the field of water power. NREL's team of scientists, engineers and computer experts has broad experience in physical oceanography, meteorology, modeling, data analysis, and Geographic Information Systems. Many years of experience in wind assessment have enabled NREL to develop the skills and methodologies to evaluate the development potential of many different water-based energy technologies. Read about NREL's current water power resource characterization projects. Printable Version Water Power Research Home Capabilities Design Review & Analysis Device & Component Testing

228

Suppressant: Electric Fields  

Science Conference Proceedings (OSTI)

*. Bookmark and Share. Suppressant:Electric Fields. Fire Extinguishment of Pool Flames by Means of a DC electric Field.. ...

2011-11-04T23:59:59.000Z

229

Internal split field generator  

DOE Patents (OSTI)

A generator includes a coil of conductive material. A stationary magnetic field source applies a stationary magnetic field to the coil. An internal magnetic field source is disposed within a cavity of the coil to apply a moving magnetic field to the coil. The stationary magnetic field interacts with the moving magnetic field to generate an electrical energy in the coil.

Thundat; ,Thomas George (Knoxville, TN); Van Neste, Charles W. (Kingston, TN); Vass, Arpad Alexander (Oak Ridge, TN)

2012-01-03T23:59:59.000Z

230

Definition: Field Sampling | Open Energy Information  

Open Energy Info (EERE)

Field Sampling Field Sampling Jump to: navigation, search Dictionary.png Field Sampling Systematic field sampling is critical for reliable characterize a geothermal resource. Some of the physical and chemical properties of rock samples can be estimated by visual inspection, but accurate determination of these properties requires detailed laboratory analysis. Surface or subsurface fluid sampling is also routinely performed to characterize the chemical, thermal, or hydrological properties of a hydrothermal system. Combinations of these sampling techniques have traditionally been used to obtain important information used to determine whether or not a viable power generation or heat utilization facility can be developed at a prospect. Soil sampling is a less commonly used method for exploration of

231

ENTO 489 Field Entomology Field Project Plan  

E-Print Network (OSTI)

ENTO 489 ­ Field Entomology Field Project Plan GENERAL Title: A Taxonomic Survey of Late Summer will be using aerial sweep nets as our only technique to collect the butterflies because this is the best way: · Materials needed to implement the project in the field include: o 2 aerial sweep nets o 2-4 killing jars set

Behmer, Spencer T.

232

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization surveys Characterization surveys An ORISE technicians performs a characterization survey The Oak Ridge Institute for Science and Education (ORISE) performs independent, objective characterization surveys to define the extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide guidance to determine the best remediation procedures and are a cost-effective method of ensuring a site meets preliminary regulatory standards. ORISE designs characterization surveys using the data quality objectives process. This approach focuses on the particular objective of characterization, and ensures that only the data needed to address the characterization decisions are collected. Data collection efforts are

233

External split field generator  

DOE Patents (OSTI)

A generator includes a coil disposed about a core. A first stationary magnetic field source may be disposed on a first end portion of the core and a second stationary magnetic field source may be disposed on a second end portion of core. The first and second stationary magnetic field sources apply a stationary magnetic field to the coil. An external magnetic field source may be disposed outside the coil to apply a moving magnetic field to the coil. Electrical energy is generated in response to an interaction between the coil, the moving magnetic field, and the stationary magnetic field.

Thundat, Thomas George (Knoxville, TN); Van Neste, Charles W. (Kingston, TN); Vass, Arpad Alexander (Oak Ridge, TN)

2012-02-21T23:59:59.000Z

234

Wide Area Wind Field Monitoring Status & Results  

DOE Green Energy (OSTI)

Volume-scanning elastic has been investigated as a means to derive 3D dynamic wind fields for characterization and monitoring of wind energy sites. An eye-safe volume-scanning lidar system was adapted for volume imaging of aerosol concentrations out to a range of 300m. Reformatting of the lidar data as dynamic volume images was successfully demonstrated. A practical method for deriving 3D wind fields from dynamic volume imagery was identified and demonstrated. However, the natural phenomenology was found to provide insufficient aerosol features for reliable wind sensing. The results of this study may be applicable to wind field measurement using injected aerosol tracers.

Alan Marchant; Jed Simmons

2011-09-30T23:59:59.000Z

235

Field Emission Measurements from Niobium Electrodes  

SciTech Connect

Increasing the operating voltage of a DC high voltage photogun serves to minimize space charge induced emittance growth and thereby preserve electron beam brightness, however, field emission from the photogun cathode electrode can pose significant problems: constant low level field emission degrades vacuum via electron stimulated desorption which in turn reduces photocathode yield through chemical poisoning and/or ion bombardment and high levels of field emission can damage the ceramic insulator. Niobium electrodes (single crystal, large grain and fine grain) were characterized using a DC high voltage field emission test stand at maximum voltage -225kV and electric field gradient > 10MV/m. Niobium electrodes appear to be superior to diamond-paste polished stainless steel electrodes.

M. BastaniNejad, P.A. Adderley, J. Clark, S. Covert, J. Hansknecht, C. Hernandez-Garcia, R. Mammei, M. Poelker

2011-03-01T23:59:59.000Z

236

The Characterization of Various ZnO Nanostructures Using Field ...  

Science Conference Proceedings (OSTI)

Various morphologies and sizes of ZnO materials have led to a wide range of promising applications. Although research related to the applications of ZnO is...

237

PISCES Water Characterization Field Study: Site F Report  

Science Conference Proceedings (OSTI)

This report, part of EPRI's Power Plant Integrated Systems-Chemical Emissions Study (PISCES), evaluates the impacts of ammonia slip from selective catalytic reduction (SCR) operation on pond-based passive wastewater treatment systems at a coal-fired power station. The research evaluated fly ash pond treatment performance as well as the impacts of the upstream scrubber pond and bottom ash pond.

2000-06-22T23:59:59.000Z

238

Characterization of Rare Earth Minerals with Field Emission ...  

Science Conference Proceedings (OSTI)

Current Korean R&D and Investment Strategies in Response to REE Demand & Supply Concerns Development of a High Recovery Process Flowsheet for...

239

Characterizing Fractures in Geysers Geothermal Field by Micro...  

Open Energy Info (EERE)

water through existing fractures into hot wet and hot dry rocks by thermo-elastic cooling shrinkage. The stimulated, existing fractures thus enhance the permeability of the...

240

PISCES Water Characterization Field Study: Site G Report  

Science Conference Proceedings (OSTI)

This report, part of EPRI's Power Plant Integrated Systems-Chemical Emissions Study (PISCES), evaluates impacts of ammonia slip from selective catalytic reduction (SCR) operation on pond-based passive wastewater treatment systems at a coal-fired power station. The research evaluated fly ash pond treatment performance as well as impacts of the upstream scrubber pond and bottom ash pond.

2001-06-29T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Wind Field Characterization from the Trajectories of Small Balloons  

Science Conference Proceedings (OSTI)

This paper reports the development and application of a new wind sensing system, ValidWind. ValidWind consists of small, helium-filled tracer balloons and an instrument that tracks them with high spatial resolution by means of an eye-safe lidar ...

Thomas D. Wilkerson; Alan B. Marchant; Thomas J. Apedaile

2012-09-01T23:59:59.000Z

242

PROPOSAL Characterization of Field and Lab Aged Cables  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DoE Peer Review Nov 2010 2 * Underground cable system infrastructure is complex and aging. * Failures are increasing * If not addressed then old infrastructure will not support...

243

AA8, Synthesis and Field Emission Characterizations of Well ...  

Science Conference Proceedings (OSTI)

The precursor solution containing zinc nitrate hexahydrate (Zn (NO3)2?6H2O, 2.5 mmol), hexamethylenetetramine (HMTA, 2.5 mmol) and distilled water.

244

3D Magnetotelluric characterization of the COSO Geothermal Field  

E-Print Network (OSTI)

of the subsurface electrical resistivity/conductivity canfluid flow. Electrical resistivity/conductivity is a primary

Newman, Gregory A.; Hoversten, Michael; Gasperikova, Erika; Wannamaker, Philip E.

2005-01-01T23:59:59.000Z

245

Characterization of Field-Exposed Iron Aluminide Hot Gas Filters  

SciTech Connect

The use of a power turbine fired with coal-derived synthesis gas will require some form of gas cleaning in order to protect turbine and downstream components from degradation by erosion, corrosion, or deposition. Hot-gas filtration is one form of cleaning that offers the ability to remove particles from the gases produced by gasification processes without having to substantially cool and, possibly, reheat them before their introduction into the turbine. This technology depends critically on materials durability and reliability, which have been the subject of study for a number of years (see, for example, Alvin 1997, Nieminen et al. 1996, Oakey et al. 1997, Quick and Weber 1995, Tortorelli, et al. 1999).

McKamey, C.G.; McCleary, D.; Tortorelli, P.F.; Sawyer, J.; Lara-Curzio, E.; Judkins, R.R.

2002-09-19T23:59:59.000Z

246

Analyses of Magnetic-Field Peak-Exposure Summary Measures  

Science Conference Proceedings (OSTI)

Past emphasis on exposure characterization and analyses for magnetic fields has been on measures of central tendency, such as long-term time-weighted average (TWA) exposure. Past emphasis on exposure characterization and analyses for magnetic fields has been on measures of central tendency such as long-term time-weighted average (TWA) exposure. This report examines peak exposure measures such as the maximum and 99th percentile of measurements during a day. EPRI sponsored this study to enhance industry kn...

2003-11-19T23:59:59.000Z

247

Three-Dimensional Imaging of the High Sea-State Wave Field Encompassing Ship Slamming Events  

Science Conference Proceedings (OSTI)

Understanding and modeling ship wave slamming necessitates characterizing the surface wave field that results in slamming events. Shipboard measurements of the incoming wave field were made during sea trials of the twin-hull Sea Fighter (FSF-1), ...

A. Brandt; J. L. Mann; S. E. Rennie; A. P. Herzog; T. B. Criss

2010-04-01T23:59:59.000Z

248

One-point statistics and intermittency of induced electric field in the solar wind  

E-Print Network (OSTI)

The interplanetary induced electric field e=vxb is studied, using solar wind time series. The probability distribution functions (PDFs) of the electric field components are measured from the data and their non-gaussianity is discussed. Moreover, for the first time we show that the electric field turbulence is characterized by intermittency. This point is addressed by studying, as usual, the scaling of the PDFs of field increments, which allows a quantitative characterization of intermittency.

Luca Sorriso-Valvo; Vincenzo Carbone; Roberto Bruno

2004-05-26T23:59:59.000Z

249

Evolution of primordial magnetic fields in mean-field approximation  

E-Print Network (OSTI)

We study the evolution of phase-transition-generated cosmic magnetic fields coupled to the primeval cosmic plasma in turbulent and viscous free-streaming regimes. The evolution laws for the magnetic energy density and correlation length, both in helical and non-helical cases, are found by solving the autoinduction and Navier-Stokes equations in mean-field approximation. Analytical results are derived in Minkowski spacetime and then extended to the case of a Friedmann universe with zero spatial curvature, both in radiation and matter dominated eras. The three possible viscous free-streaming phases are characterized by a drag term in the Navier-Stokes equation which depends on the free-steaming properties of neutrinos, photons, or hydrogen atoms, respectively. In the case of non-helical magnetic fields, the magnetic intensity $B$ and the magnetic correlation length $\\xi_B$ evolve asymptotically with the temperature $T$ as $B(T) \\simeq \\kappa_B (N_i v_i)^{\\varrho_1} (T/T_i)^{\\varrho_2}$ and $\\xi_B(T) \\simeq \\kap...

Campanelli, Leonardo

2013-01-01T23:59:59.000Z

250

Measurement of Power System Magnetic Fields by Waveform Capture  

Science Conference Proceedings (OSTI)

An instrumentation and software package has been developed to characterize an extensive range of temporal, spatial, and frequency parameters associated with magnetic fields.The MultiWave (TM) System can capture the actual magnetic field waveform and coexisting power system environmental conditions in residential, nonresidential, and transient capture applications.

1992-03-01T23:59:59.000Z

251

High magnetic field processing of liquid crystalline polymers  

DOE Patents (OSTI)

A process of forming bulk articles of oriented liquid crystalline thermoset material, the material characterized as having an enhanced tensile modulus parallel to orientation of an applied magnetic field of at least 25 percent greater than said material processed in the absence of a magnetic field, by curing a liquid crystalline thermoset precursor within a high strength magnetic field of greater than about 2 Tesla, is provided, together with a resultant bulk article of a liquid crystalline thermoset material, said material processed in a high strength magnetic field whereby said material is characterized as having a tensile modulus parallel to orientation of said field of at least 25 percent greater than said material processed in the absence of a magnetic field.

Smith, M.E.; Benicewicz, B.C.; Douglas, E.P.

1998-11-24T23:59:59.000Z

252

High magnetic field processing of liquid crystalline polymers  

DOE Patents (OSTI)

A process of forming bulk articles of oriented liquid crystalline thermoset material, the material characterized as having an enhanced tensile modulus parallel to orientation of an applied magnetic field of at least 25 percent greater than said material processed in the absence of a magnetic field, by curing a liquid crystalline thermoset precursor within a high strength magnetic field of greater than about 2 Tesla, is provided, together with a resultant bulk article of a liquid crystalline thermoset material, said material processed in a high strength magnetic field whereby said material is characterized as having a tensile modulus parallel to orientation of said field of at least 25 percent greater than said material processed in the absence of a magnetic field.

Smith, Mark E. (Los Alamos, NM); Benicewicz, Brian C. (Los Alamos, NM); Douglas, Elliot P. (Los Alamos, NM)

1998-01-01T23:59:59.000Z

253

1 String field theory  

E-Print Network (OSTI)

This elementary introduction to string field theory highlights the features and the limitations of this approach to quantum gravity as it is currently understood. String field theory is a formulation of string theory as a field theory in space-time with an infinite number of massive fields. Although existing constructions of string field theory require expanding around a fixed choice of space-time background, the theory is in principle background-independent, in the sense that different backgrounds can be realized as different field configurations in the theory. String field theory is the only string formalism developed so far which, in principle, has the potential to systematically address questions involving multiple asymptotically distinct string backgrounds. Thus, although it is not yet well defined as a quantum theory, string field theory may eventually be helpful for understanding questions related to cosmology in string theory. 1.1

W. Taylor

2006-01-01T23:59:59.000Z

254

BUFFERED WELL FIELD OUTLINES  

U.S. Energy Information Administration (EIA) Indexed Site

OIL & GAS FIELD OUTLINES FROM BUFFERED WELLS The VBA Code below builds oil & gas field boundary outlines (polygons) from buffered wells (points). Input well points layer must be a...

255

Far field acceleration  

SciTech Connect

Far fields are propagating electromagnetic waves far from their source, boundary surfaces, and free charges. The general principles governing the acceleration of charged particles by far fields are reviewed. A survey of proposed field configurations is given. The two most important schemes, Inverse Cerenkov acceleration and Inverse free electron laser acceleration, are discussed in detail.

Fernow, R.C.

1995-07-01T23:59:59.000Z

256

Refining and Characterization  

Science Conference Proceedings (OSTI)

Mar 13, 2012 ... Solar Cell Silicon: Refining and Characterization .... Silicon PV Wafers: Correlation of Mechanical Properties and Crack Propagation with...

257

Mixed Waste Characterization Guidelines  

Science Conference Proceedings (OSTI)

This report presents an overview of the process of characterizing potential mixed waste streams from nuclear power plants. Utility experts developed these guidelines to help guide utility personnel through the characterization process and provide a mechanism for properly documenting the characterization of individual waste streams.

1995-12-31T23:59:59.000Z

258

Magnetic field generator  

DOE Patents (OSTI)

A magnetic field generating device provides a useful magnetic field within a specific retgion, while keeping nearby surrounding regions virtually field free. By placing an appropriate current density along a flux line of the source, the stray field effects of the generator may be contained. One current carrying structure may support a truncated cosine distribution, and it may be surrounded by a current structure which follows a flux line that would occur in a full coaxial double cosine distribution. Strong magnetic fields may be generated and contained using superconducting cables to approximate required current surfaces.

Krienin, Frank (Shoreham, NY)

1990-01-01T23:59:59.000Z

259

BUFFERED WELL FIELD OUTLINES  

U.S. Energy Information Administration (EIA) Indexed Site

OIL & GAS FIELD OUTLINES FROM BUFFERED WELLS OIL & GAS FIELD OUTLINES FROM BUFFERED WELLS The VBA Code below builds oil & gas field boundary outlines (polygons) from buffered wells (points). Input well points layer must be a feature class (FC) with the following attributes: Field_name Buffer distance (can be unique for each well to represent reservoirs with different drainage radii) ...see figure below. Copy the code into a new module. Inputs: In ArcMap, data frame named "Task 1" Well FC as first layer (layer 0). Output: Polygon feature class in same GDB as the well points FC, with one polygon field record (may be multiple polygon rings) per field_name. Overlapping buffers for the same field name are dissolved and unioned (see figure below). Adds an attribute PCTFEDLAND which can be populated using the VBA

260

NETL: Emissions Characterization - CMU Emissions Characterization Study  

NLE Websites -- All DOE Office Websites (Extended Search)

Source Emissions Characterization Study Source Emissions Characterization Study The emissions characterization study is being performed in conjunction with the Pittsburgh Air Quality Study [PDF-744KB], a larger effort that includes ambient measurements and atmospheric modeling of the Pittsburgh region. The main objectives of this portion of the study are: To achieve advanced characterization of the PM in the Pittsburgh region. Measurements include the PM size, surface, volume, and mass distribution; chemical composition as a function of size and on a single particle basis; temporal and spatial variability. To obtain accurate current fingerprints of the major primary PM sources in the Pittsburgh region using traditional filter-based sampling and state-of-the-art techniques such as dilution sampling and single particle analysis using mass spectroscopy and LIBS.

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

A characterization of the electromagnetic stress-energy tensor  

E-Print Network (OSTI)

In a previous paper, we pointed out how a dimensional analysis of the stress-energy tensor of the gravitational field allows to derive the field equation of General Relativity. In this note, we comment an analogous reasoning in presence of a 2-form, that allows to characterize the so called electromagnetic stress-energy tensor.

J. Navarro; J. B. Sancho

2011-01-13T23:59:59.000Z

262

CHARACTERIZATION OF CURRENT SHEET EVOLUTION IN A PULSED  

E-Print Network (OSTI)

CHARACTERIZATION OF CURRENT SHEET EVOLUTION IN A PULSED ELECTROMAGNETIC ACCELERATOR J.W. Berkery evolution in a pulsed electromagnetic accelerator is presented based on temporally and spatially resolved field in a pulsed electromagnetic accelerator has been presented. The magnetic field measurements have

Choueiri, Edgar

263

Field emission electron source  

DOE Patents (OSTI)

A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

Zettl, Alexander Karlwalter (Kensington, CA); Cohen, Marvin Lou (Berkeley, CA)

2000-01-01T23:59:59.000Z

264

Characterization of oil and gas reservoir heterogeneity  

SciTech Connect

The objective of the cooperative research program is to characterize Alaskan reservoirs in terms of their reserves, physical and chemical properties, geologic configuration and structure, and the development potential. The tasks completed during this period include: (1) geologic reservoir description of Endicott Field; (2) petrographic characterization of core samples taken from selected stratigraphic horizons of the West Sak and Ugnu (Brookian) wells; (3) development of a polydispersed thermodynamic model for predicting asphaltene equilibria and asphaltene precipitation from crude oil-solvent mixtures, and (4) preliminary geologic description of the Milne Point Unit.

Not Available

1991-01-01T23:59:59.000Z

265

Abandoned Texas oil fields  

SciTech Connect

Data for Texas abandoned oil fields were primarily derived from two sources: (1) Texas Railroad Commission (TRRC), and (2) Dwight's ENERGYDATA. For purposes of this report, abandoned oil fields are defined as those fields that had no production during 1977. The TRRC OILMASTER computer tapes were used to identify these abandoned oil fields. The tapes also provided data on formation depth, gravity of oil production, location (both district and county), discovery date, and the cumulative production of the field since its discovery. In all, the computer tapes identified 9211 abandoned fields, most of which had less than 250,000 barrel cumulative production. This report focuses on the 676 abandoned onshore Texas oil fields that had cumulative production of over 250,000 barrels. The Dwight's ENERGYDATA computer tapes provided production histories for approximately two-thirds of the larger fields abandoned in 1966 and thereafter. Fields which ceased production prior to 1966 will show no production history nor abandonment date in this report. The Department of Energy hopes the general availability of these data will catalyze the private sector recovery of this unproduced resource.

1980-12-01T23:59:59.000Z

266

TYPES OF FIELD TESTING  

NLE Websites -- All DOE Office Websites (Extended Search)

TYPES OF FIELD TESTING Convincing proof of energy savings and performance in a specific building and occupant context If direct proof of savings is desired, the only feasible...

267

Outdoor science field trips.  

E-Print Network (OSTI)

??The purpose of this study was to assess the cognitive and affective values of an outdoor science field trip. Participants were 28 fifth grade students, (more)

Loyd, Kerrie Anne Therese

2004-01-01T23:59:59.000Z

268

Electromagnetic Lorenz Fields  

E-Print Network (OSTI)

Gauge transformations are potential transformations that leave only specific Maxwell fields invariant. To reveal more, I develop Lorenz field equations with full Maxwell form for nongauge, sans gauge function, transformations yielding mixed, superposed retarded and outgoing, potentials. The form invariant Lorenz condition is then a charge conservation equivalent. This allows me to define three transformation classes that screen for Lorenz relevance. The nongauge Lorentz conditions add polarization fields which support emergent, light-like rays that convey energy on charge conserving phase points. These localized rays escape discovery in modern Maxwell fields where the polarizations are suppressed by gauge transformations.

H. C. Potter

2008-10-07T23:59:59.000Z

269

GLOVEBOX GLOVE CHARACTERIZATION SUMMARY  

SciTech Connect

A task was undertaken to determine primarily the permeation behavior of various glove compounds from four manufacturers. As part of the basic characterization task, the opportunity to obtain additional mechanical and thermal properties presented itself. Consequently, a total of fifteen gloves were characterized for permeation, Thermogravimetric Analysis, Puncture Resistance, Tensile Properties and Dynamic Mechanical Analysis. Detailed reports were written for each characterization technique used. This report contains the summary of the results.

Korinko, P.

2012-05-14T23:59:59.000Z

270

Characterization of Light Metals  

Science Conference Proceedings (OSTI)

Mar 15, 2012 ... Characterization of Grit Blasted Metallic Biomaterials by ... The grit blasting, a surface improvement treatment is used to enhance mechanical...

271

Characterization of Advanced Materials  

Science Conference Proceedings (OSTI)

Mar 6, 2013 ... In this study, the binary and ternary thermal energy storage materials have been performed the phase equilibrium and characterization studies...

272

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide...

273

Characterization - Programmaster.org  

Science Conference Proceedings (OSTI)

Feb 17, 2010 ... Our continuing studies involve characterization of neutron-irradiated specimens, including 12YWT and MA957 irradiated in HFIR to 9 dpa at...

274

Diamond fiber field emitters  

DOE Patents (OSTI)

A field emission electron emitter comprising an electrode formed of at least one diamond, diamond-like carbon or glassy carbon composite fiber, said composite fiber having a non-diamond core and a diamond, diamond-like carbon or glassy carbon coating on said non-diamond core, and electronic devices employing such a field emission electron emitter.

Blanchet-Fincher, Graciela B. (Wilmington, DE); Coates, Don M. (Santa Fe, NM); Devlin, David J. (Los Alamos, NM); Eaton, David F. (Wilmington, DE); Silzars, Aris K. (Landenburg, PA); Valone, Steven M. (Santa Fe, NM)

1996-01-01T23:59:59.000Z

275

Analysis of magnetic fields produced far from electric power lines  

Science Conference Proceedings (OSTI)

In this paper, the authors develop a simple and general method for analyzing the magnetic fields produced by power lines at far distances, that is, at distances large in comparison to the spacing between the line's phase conductors. Magnetic fields produced far from conventional power lines have remarkably simple properties. The authors present formulae for the fields produced by various conventional and unconventional power line configurations; included are line designs characterized by reduced magnetic-field levels. Errors in the formulae are less than [plus minus]10% at the edge of a typical transmission right-of-way.

Kaune, W.T. (Enertech Consultants Campbell, CA (United States)); Zaffanella, L.E. (High Voltage Transmission Research Center, Lenox, MA (United States))

1992-10-01T23:59:59.000Z

276

Computer Simulations of Charged Colloids in Alternating Electric Fields  

E-Print Network (OSTI)

We briefly review recent theoretical and simulation studies of charged colloidal dispersions in alternating electric fields (AC fields). The response of single colloid to an external field can be characterized by a complex polarizability, which describes the dielectric properties of the colloid and its surrounding electrical double layer. We present computer simulation studies of single spherical colloid, using a coarse-grained mesoscale approach that accounts in full for hydrodynamic and electrostatic interactions as well as for thermal fluctuations. We investigate systematically a number of controlling parameters, such as the amplitude and frequency of the AC-fields. The results are in good agreement with recent theoretical predictions.

Jiajia Zhou; Friederike Schmid

2014-01-05T23:59:59.000Z

277

Abandoned oil fields in Oklahoma  

SciTech Connect

Data are presented for approximately 165 abandoned oil fields in Oklahoma that have produced 10,000 or more barrels of oil prior to abandonment. The following information is provided for each field: county; DOE field code; field name; AAPG geologic province code; discovery date of field; year of last production, if known; discovery well operator; proven acreage; formation thickness; depth of field; gravity of oil production; calendar year; yearly field oil production; yearly field gas production; cumulative oil production; cumulative gas production; number abandoned fields in county; cumulative production of oil from fields; and cumulative production of gas from fields. (ATT)

Chism, J.

1983-08-01T23:59:59.000Z

278

THE GALACTIC MAGNETIC FIELD  

Science Conference Proceedings (OSTI)

With this Letter, we complete our model of the Galactic magnetic field (GMF), by using the WMAP7 22 GHz total synchrotron intensity map and our earlier results to obtain a 13-parameter model of the Galactic random field, and to determine the strength of the striated random field. In combination with our 22-parameter description of the regular GMF, we obtain a very good fit to more than 40,000 extragalactic Faraday rotation measures and the WMAP7 22 GHz polarized and total intensity synchrotron emission maps. The data call for a striated component to the random field whose orientation is aligned with the regular field, having zero mean and rms strength Almost-Equal-To 20% larger than the regular field. A noteworthy feature of the new model is that the regular field has a significant out-of-plane component, which had not been considered earlier. The new GMF model gives a much better description of the totality of data than previous models in the literature.

Jansson, Ronnie; Farrar, Glennys R. [Center for Cosmology and Particle Physics, Department of Physics, New York University, New York, NY 10003 (United States)

2012-12-10T23:59:59.000Z

279

Remnant field detector  

DOE Patents (OSTI)

An apparatus for qualitatively detecting remnant magnetic fields in matched pairs of magnet cores is described. Equal magnitude and oppositely oriented magnetic flux is induced in the magnet cores by oppositely wound primary windings and current source. Identically wound secondary windings generate output voltages in response to the induced flux. The output voltages generated should be of equal magnitude and opposite polarity if there is no remnant field in the cores. The output voltage will be unequal which is detected if either core has a remnant field. 1 fig.

Visser, A.T.

1986-11-24T23:59:59.000Z

280

Remnant field detector  

DOE Patents (OSTI)

A method apparatus for qualitatively detecting remnant magnetic fields in matched pairs of magnet cores. Equal magnitude and oppositely oriented magnetic flux is induced in the magnet cores by oppositely wound primary windings and current source. Identically wound secondary windings generate output voltages in response to the induced flux. The output voltages generated should be of equal magnitude and opposite polarity if there is no remnant field in the cores. The output voltages will be unequal which is detected if either core has a remnant field.

Visser, Age T. (Geneva, IL)

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Analysis Driven Field Testing  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ANALYSIS DRIVEN FIELD TESTING ANALYSIS DRIVEN FIELD TESTING Greg Barker, MEP Paul Norton, NERD C.E. Hancock, MEP Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 MODELING DRIVEN FIELD TESTING Greg Barker, MEP Paul Norton, NERD C.E. Hancock, MEP Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 MODELING DRIVEN MEASUREMENTS Greg Barker, MEP Paul Norton, NERD C.E. Hancock, MEP Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 "Modeling without measuring lacks credibility. Measuring without modeling lacks generality." Ed Hancock

282

NETL: Carbon Storage - Geologic Characterization Efforts  

NLE Websites -- All DOE Office Websites (Extended Search)

RCSP Geologic Characterization Efforts RCSP Geologic Characterization Efforts The U.S. Department of Energy created a nationwide network of seven Regional Carbon Sequestration Partnerships (RCSP) in 2003 to help determine and implement the technology, infrastructure, and regulations most appropriate to promote carbon storage in different regions of the United States and Canada. The RCSP Initiative is being implemented in three phases: (1) Characterization Phase (2003-2005) to collect data on CO2 stationary sources and geologic formations and develop the human capital to support and enable future carbon storage field tests, (2) Validation Phase (2005-2011) to evaluate promising CO2 storage opportunities through a series of small-scale (<1 million metric tons of CO2) field tests, and (3) Development Phase (2008-2018+) that involves the injection of 1 million metric tons or more of CO2 by each RCSP into regionally significant geologic formations. In addition to working toward developing human capital, encouraging stakeholder networking, and enhancing public outreach and education on carbon capture and storage (CCS), the RCSPs are conducting extensive geologic characterization across all three project phases, as well as CO2 stationary source identification and re-evaluation over time.

283

Field Operations Program  

NLE Websites -- All DOE Office Websites (Extended Search)

SUMMARY This report summarizes the Accelerated Reliability testing of five lead-acid battery- equipped Chevrolet S-10 electric vehicles by the U.S. Department of Energy's Field...

284

Fields in Circle  

Science Conference Proceedings (OSTI)

... Field circled in red shown to the right. ... roughly to the blue circle in the tool on the left. ... Spreadsheet Tool, open a spreadsheet as a tab-delimited text ...

285

Dangerous electromagnetic fields?  

NLE Websites -- All DOE Office Websites (Extended Search)

Dangerous electromagnetic fields? Dangerous electromagnetic fields? Name: Tommy T Joseph Location: N/A Country: N/A Date: N/A Question: Why are electromagnetic fields supposedly dangerous? Replies: I assume you are asking about power line frequency (60 Hz) fields, since they have been in the news lately. No one knows for sure that they are dangerous. There have been a few studies which seem to show an association between how close homes are to power lines, and the incidence of childhood cancer (mostly leukemia) in children living (or who have lived) in those homes. Other similar studies have not found such an association. In all the studies which have found an association, none has actually measured the fields. Studies which actually have measured the fields find no association. There is no known mechanism for 60 Hz fields to cause cancer. Furthermore, the classic "dose-response relationship," that is, the greater the dose, the greater the response, does not seem to work here. Many laboratory studies have found that 60 Hz fields have an effect on organisms under certain conditions, but none of the observed effects can be convincingly related to a hazard. The bottom line is, no one knows for sure. It is important to realize that it is impossible to prove that anything is completely safe. My personal opinion is that, if there is a risk, it must be very small, or it wouldn't be so hard to prove. I can supply some good unbiased references if you are interested.

286

Radiation Field Control Manual  

Science Conference Proceedings (OSTI)

The EPRI Radiation Management Program is dedicated to reducing nuclear power plant worker personnel exposure by developing practices and technologies to increase the radiation protection of the worker, and to implement methods to reduce radiation fields. The nuclear power industry has recently implemented the RP2020 Initiative to promote positive radiation protection trends. Control of radiation fields is crucial to one of the initiative goals of reducing exposure. This manual provides the current state ...

2004-12-16T23:59:59.000Z

287

Field Research Challenge Site  

DOE Green Energy (OSTI)

Previous experiments at the Rifle, Colorado Integrated Field Research Challenge (IFRC) site demonstrated that field-scale addition of acetate to groundwater reduced the ambient soluble uranium concentration. In this report, sediment samples collected before and after acetate field addition were used to assess the active microbes via {sup 13}C acetate stable isotope probing on 3 phases [coarse sand, fines (8-approximately 150 {micro}m), groundwater (0.2-8 {micro}m)] over a 24-day time frame. TRFLP results generally indicated a stronger signal in {sup 13}C-DNA in the 'fines' fraction compared to the sand and groundwater. Before the field-scale acetate addition, a Geobacter-like group primarily synthesized {sup 13}C-DNA in the groundwater phase, an alpha Proteobacterium primarily grew on the fines/sands, and an Acinetobacter sp. and Decholoromonas-like OTU utilized much of the {sup 13}C acetate in both groundwater and particle-associated phases. At the termination of the field-scale acetate addition, the Geobacter-like species was active on the solid phases rather than the groundwater, while the other bacterial groups had very reduced newly synthesized DNA signal. These findings will help to delineate the acetate utilization patterns of bacteria in the field and can lead to improved methods for stimulating distinct microbial populations in situ.

Kerkhof, L.; Williams, K.H.; Long, P.E.; McGuinness, L.

2011-02-21T23:59:59.000Z

288

Small-Scale Carbon Sequestration Field Test Yields Significant Lessons  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small-Scale Carbon Sequestration Field Test Yields Significant Small-Scale Carbon Sequestration Field Test Yields Significant Lessons Learned Small-Scale Carbon Sequestration Field Test Yields Significant Lessons Learned May 20, 2009 - 1:00pm Addthis Washington, DC - The Midwest Regional Carbon Sequestration Partnership, one of seven regional partnerships created by the U.S. Department of Energy (DOE) to advance carbon capture and storage technologies, has completed a preliminary geologic characterization and sequestration field test at FirstEnergy's R. E. Burger Plant near Shadyside, Ohio. The project provided significant geologic understanding and "lessons learned" from a region of the Appalachian Basin with few existing deep well penetrations for geologic characterization. The initial targets for the geologic storage of carbon dioxide (CO2) at the

289

Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3  

SciTech Connect

The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

Enertech Consultants

1996-04-01T23:59:59.000Z

290

Shear-wave splitting and reservoir crack characterization: the Coso  

Open Energy Info (EERE)

Shear-wave splitting and reservoir crack characterization: the Coso Shear-wave splitting and reservoir crack characterization: the Coso geothermal field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Shear-wave splitting and reservoir crack characterization: the Coso geothermal field Details Activities (1) Areas (1) Regions (0) Abstract: This paper aims to improve current understanding of the subsurface fracture system in the Coso geothermal field, located in east-central California. The Coso reservoir is in active economic development, so that knowledge of the subsurface fracture system is of vital importance for an accurate evaluation of its geothermal potential and day-to-day production. To detect the geometry and density of fracture systems we applied the shear-wave splitting technique to a large number of

291

Use Of Electrical Surveys For Geothermal Reservoir Characterization-  

Open Energy Info (EERE)

Use Of Electrical Surveys For Geothermal Reservoir Characterization- Use Of Electrical Surveys For Geothermal Reservoir Characterization- Beowawe Geothermal Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Use Of Electrical Surveys For Geothermal Reservoir Characterization- Beowawe Geothermal Field Details Activities (4) Areas (1) Regions (0) Abstract: The STAR geothermal reservoir simulator was used to model the natural state of the Beowawe geothermal field, and to compute the subsurface distributions of temperature and salinity which were in turn employed to calculate pore-fluid resistivity. Archie's law, which relates formation resistivity to porosity and pore-fluid resistivity, was adopted to infer formation resistivity distribution. Subsequently, DC, MT and SP postprocessors were used to compute the expected response corresponding to

292

Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nonaqueous-Phase Liquid Characterization and Post-Remediation Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification Sampling Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification Sampling Proceedings of the Fourth International Conference on Remediation of Chlorinated and Recalcitrant Compounds. May 2004, Monterey, California. Charles Tabor, Randall Juhlin, Paul Darr, Julian Caballero, Joseph Daniel, David Ingle Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification Sampling More Documents & Publications Steam and ET-DSP Combined for DNAPL Remediation: Full-Scale Site Restoration at Young - Rainey STAR Center Project Overview: Successful Field-Scale In Situ Thermal NAPL Remediation Successful Field-Scale In Situ Thermal NAPL Remediation at the Young - Rainey STAR Center

293

Characterization of Fractures in Geothermal Reservoirs Using Resistivity |  

Open Energy Info (EERE)

Characterization of Fractures in Geothermal Reservoirs Using Resistivity Characterization of Fractures in Geothermal Reservoirs Using Resistivity Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Characterization of Fractures in Geothermal Reservoirs Using Resistivity Abstract The optimal design of production in fractured geothermal reservoirs requires knowledge of the resource's connectivity, therefore making fracture characterization highly important. This study aims to develop methodologies to use resistivity measurements to infer fracture properties in geothermal fields. The resistivity distribution in the field can be estimated by measuring potential differences between various points and the data can then be used to infer fracture properties due to the contrast in resistivity between water and rock.

294

Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nonaqueous-Phase Liquid Characterization and Post-Remediation Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification Sampling Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification Sampling Proceedings of the Fourth International Conference on Remediation of Chlorinated and Recalcitrant Compounds. May 2004, Monterey, California. Charles Tabor, Randall Juhlin, Paul Darr, Julian Caballero, Joseph Daniel, David Ingle Nonaqueous-Phase Liquid Characterization and Post-Remediation Verification Sampling More Documents & Publications Project Overview: Successful Field-Scale In Situ Thermal NAPL Remediation Successful Field-Scale In Situ Thermal NAPL Remediation at the Young - Rainey STAR Center Steam and ET-DSP Combined for DNAPL Remediation: Full-Scale Site Restoration at Young - Rainey STAR Center

295

Combined experiment Phase 2 data characterization  

DOE Green Energy (OSTI)

The National Renewable Energy Laboratory`s ``Combined Experiment`` has yielded a large quantity of experimental data on the operation of a downwind horizontal axis wind turbine under field conditions. To fully utilize this valuable resource and identify particular episodes of interest, a number of databases were created that characterize individual data events and rotational cycles over a wide range of parameters. Each of the 59 five-minute data episodes collected during Phase 11 of the Combined Experiment have been characterized by the mean, minimum, maximum, and standard deviation of all data channels, except the blade surface pressures. Inflow condition, aerodynamic force coefficient, and minimum leading edge pressure coefficient databases have also been established, characterizing each of nearly 21,000 blade rotational cycles. In addition, a number of tools have been developed for searching these databases for particular episodes of interest. Due to their extensive size, only a portion of the episode characterization databases are included in an appendix, and examples of the cycle characterization databases are given. The search tools are discussed and the FORTRAN or C code for each is included in appendices.

Miller, M.S.; Shipley, D.E.; Young, T.S.; Robinson, M.C.; Luttges, M.W. [Colorado Univ., Boulder, CO (United States); Simms, D.A. [National Renewable Energy Lab., Golden, CO (United States)

1995-11-01T23:59:59.000Z

296

Field reversed ion rings  

DOE Green Energy (OSTI)

In typical field-reversed ion ring experiments, an intense annular ion beam is injected across a plasma-filled magnetic cusp region into a neutral gas immersed in a ramped solenoidal magnetic field. Assuming the characteristic ionization time is much shorter than the long ({ital t}{approx_gt}2{pi}/{Omega}{sub {ital i}}) beam evolution time scale, we investigate the formation of an ion ring in the background plasma followed by field reversal, using a 21/2-D hybrid, PIC code FIRE, in which the beam and background ions are treated as particles and the electrons as a massless fluid. We show that beam bunching and trapping occurs downstream in a ramped magnetic field for an appropriate set of experimental parameters. We find that a compact ion ring is formed and a large field reversal {zeta}={delta}{ital B}/{ital B}{approx_gt}1 on axis develops. We also observe significant deceleration of the ring on reflection due to the transfer of its axial momentum to the background ions, which creates favorable trapping conditions. {copyright} {ital 1995 American Institute of Physics.}

Sudan, R.N.; Omelchenko, Y.A. [Laboratory of Plasma Studies, Cornell University, Ithaca, New York 14853 (United States)

1995-09-01T23:59:59.000Z

297

Site characterization handbook  

SciTech Connect

This Handbook discusses both management and technical elements that should be considered in developing a comprehensive site characterization program. Management elements typical of any project of a comparable magnitude and complexity are combined with a discussion of strategies specific to site characterization. Information specific to the technical elements involved in site characterization is based on guidance published by the Nuclear Regulatory Commission (NRC) with respect to licensing requirements for LLW disposal facilities. The objective of this Handbook is to provide a reference for both NRC Agreement States and non-Agreement States for use in developing a comprehensive site characterization program that meets the specific objectives of the State and/or site developer/licensee. Each site characterization program will vary depending on the objectives, licensing requirements, schedules/budgets, physical characteristics of the site, proposed facility design, and the specific concerns raised by government agencies and the public. Therefore, the Handbook is not a prescriptive guide to site characterization. 18 refs., 6 figs.

Not Available

1988-06-01T23:59:59.000Z

298

Electric and Magnetic Field Exposure Levels (0 to 3000 Hz) near Residential Photovoltaic Energy Generation Facilities  

Science Conference Proceedings (OSTI)

Electric and magnetic field levels associated with two residential photovoltaic energy generation facilities were characterized in this study. This measurement evaluation included static (direct current [DC]) magnetic fields and power-frequency alternating current (AC) electric and magnetic fields (up to 3,000 Hz).The major source of DC and AC magnetic fields associated with a residential solar facility is the power inverter that converts DC to AC electricity. In close proximity to one ...

2012-11-01T23:59:59.000Z

299

Field Mapping At Dixie Valley Geothermal Field Area (Wesnousky...  

Open Energy Info (EERE)

search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Field Mapping At Dixie Valley Geothermal Field Area (Wesnousky, Et Al., 2003) Exploration Activity Details...

300

Pulsed hybrid field emitter  

DOE Patents (OSTI)

A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays. 11 figs.

Sampayan, S.E.

1998-03-03T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Field Operations Program  

NLE Websites -- All DOE Office Websites (Extended Search)

688 688 May 1999 Field Operations Program Activities Status Report Fiscal Years 1997 through mid-1999 J. E. Francfort D. V. O'Hara L. A. Slezak DOE/ID-10688 Field Operations Program Activities Status Report Fiscal Years 1997 through mid-1999 J. E. Francfort 1 D. V. O'Hara 2 L. A. Slezak 2 Published May 1999 Idaho National Engineering and Environmental Laboratory Automotive Systems and Technology Department Lockheed Martin Idaho Technologies Company Idaho Falls, Idaho 83415 Prepared for the U.S. Department of Energy Idaho Operations Office 1 INEEL/Lockheed Martin Idaho Technologies Co. 2 U.S. Department of Energy iii EXECUTIVE SUMMARY The Field Operations Program is an electric vehicle testing and evaluation program sponsored by U.S. Department of Energy and managed by the Idaho National Engineering and Environmental

302

Pulsed hybrid field emitter  

SciTech Connect

A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays.

Sampayan, Stephen E. (Manteca, CA)

1998-01-01T23:59:59.000Z

303

Microbial field pilot study  

SciTech Connect

A multi-well microbially enhanced oil recovery field pilot has been performed in the Southeast Vassar Vertz Sand Unit in Payne County, Oklahoma. The primary emphasis of the experiment was preferential plugging of high permeability zones for the purpose of improving waterflood sweep efficiency. Studies were performed to determine reservoir chemistry, ecology, and indigenous bacteria populations. Growth experiments were used to select a nutrient system compatible with the reservoir that encouraged growth of a group of indigenous nitrate-using bacteria and inhibit growth of sulfate-reducing bacteria. A specific field pilot area behind an active line drive waterflood was selected. Surface facilities were designed and installed. Injection protocols of bulk nutrient materials were prepared to facilitate uniform distribution of nutrients within the pilot area. By the end of December, 1991, 82.5 tons (75.0 tonnes) of nutrients had been injected in the field. A tracer test identified significant heterogeneity in the SEVVSU and made it necessary to monitor additional production wells in the field. The tracer tests and changes in production behavior indicate the additional production wells monitored during the field trial were also affected. Eighty two and one half barrels (13.1 m[sup 3]) of tertiary oil have been recovered. Microbial activity has increased CO[sub 2] content as indicated by increased alkalinity. A temporary rise in sulfide concentration was experienced. These indicate an active microbial community was generated in the field by the nutrient injection. Pilot area interwell pressure interference test results showed that significant permeability reduction occurred. The interwell permeabilities in the pilot area between the injector and the three pilot production wells were made more uniform which indicates a successful preferential plugging enhanced oil recovery project.

Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Coates, J.D.; Chisholm, J.L.

1993-05-01T23:59:59.000Z

304

Characterizing electrocatalytic surfaces: Electrochemical and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterizing electrocatalytic surfaces: Electrochemical and NMR studies of methanol and carbon monoxide on PtC Title Characterizing electrocatalytic surfaces: Electrochemical...

305

The solar magnetic field  

E-Print Network (OSTI)

The magnetic field of the Sun is the underlying cause of the many diverse phenomena combined under the heading of solar activity. Here we describe the magnetic field as it threads its way from the bottom of the convection zone, where it is built up by the solar dynamo, to the solar surface, where it manifests itself in the form of sunspots and faculae, and beyond into the outer solar atmosphere and, finally, into the heliosphere. On the way it, transports energy from the surface and the subsurface layers into the solar corona, where it heats the gas and accelerates the solar wind.

Solanki, Sami K; Schssler, Manfred; 10.1088/0034-4885/69/3/R02

2010-01-01T23:59:59.000Z

306

Hunton Group core workshop and field trip  

SciTech Connect

The Late Ordovician-Silurian-Devonian Hunton Group is a moderately thick sequence of shallow-marine carbonates deposited on the south edge of the North American craton. This rock unit is a major target for petroleum exploration and reservoir development in the southern Midcontinent. The workshop described here was held to display cores, outcrop samples, and other reservoir-characterization studies of the Hunton Group and equivalent strata throughout the region. A field trip was organized to complement the workshop by allowing examination of excellent outcrops of the Hunton Group of the Arbuckle Mountains.

Johnson, K.S. [ed.

1993-12-31T23:59:59.000Z

307

ARM - Field Campaign - 1996 NARSTO Northeast Field Study (NARSTO-NE)  

NLE Websites -- All DOE Office Websites (Extended Search)

6 NARSTO Northeast Field Study (NARSTO-NE) 6 NARSTO Northeast Field Study (NARSTO-NE) Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : 1996 NARSTO Northeast Field Study (NARSTO-NE) 1996.07.01 - 1996.07.28 Lead Scientist : Larry Kleinman For data sets, see below. Description The DOE G-1 aircraft was deployed in the New York City metropolitan area as part of the North American Research Strategy for Tropospheric Ozone-Northeast effort to determine the causes of elevated ozone levels in the northeastern United States. Measurements of ozone, ozone precursors, and other photochemically active trace gases were made upwind and downwind of New York City with the objective of characterizing the ozone formation process and its dependence on ambient levels of NOx and volatile organic

308

Corn Fields Shutting Down  

E-Print Network (OSTI)

Fields of corn around Indiana, especially early-planted ones, are in the process of shutting down for the season. While only 3 % of the states crop was estimated to be mature (i.e., kernel black layer) as of the week ending 31 Aug, 41 % of the crop was estimated to be at dent stage or beyond (Indiana Ag Stats Service, 2 Sep 2003). The onset of maturity is naturally accompanied by an eventual senescence of the entire solar harvesting machinery, but some fields appear to be shutting down prematurely and deserve to be monitored for potential stalk health issues prior to harvest (Nielsen, 2003). The short-term forecast for cool evening temperatures in the mid-50s or lower throughout much of the state the remainder of this week will further accelerate premature senescence of these stressed fields. Plant stresses contributing to the premature shutdown of some fields include: Root systems compromised by saturated soil conditions caused by early and midseason monsoon events. Drier than normal conditions throughout much of August, accompanied by stressful low to mid-90 F temperatures in the latter part of the month.

R. L. (bob Nielsen

2003-01-01T23:59:59.000Z

309

Light Field Appearance Manifolds  

E-Print Network (OSTI)

Abstract. Statistical shape and texture appearance models are powerful image representations, but previously had been restricted to 2D or 3D shapes with smooth surfaces and lambertian reflectance. In this paper we present a novel 3D appearance model using image-based rendering techniques, which can represent complex lighting conditions, structures, and surfaces. We construct a light field manifold capturing the multi-view appearance of an object class and extend the direct search algorithm of Cootes and Taylor to match new light fields or 2D images of an object to a point on this manifold. When matching to a 2D image the reconstructed light field can be used to render unseen views of the object. Our technique differs from previous view-based active appearance models in that model coefficients between views are explicitly linked, and that we do not model any pose variation within the shape model at a single view. It overcomes the limitations of polygonal based appearance models and uses light fields that are acquired in real-time. 1

Chris Mario Christoudias; Trevor Darrell

2004-01-01T23:59:59.000Z

310

Geophysical Characterization of a Geothermal System Neal Hot Springs,  

Open Energy Info (EERE)

Characterization of a Geothermal System Neal Hot Springs, Characterization of a Geothermal System Neal Hot Springs, Oregon, USA Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Geophysical Characterization of a Geothermal System Neal Hot Springs, Oregon, USA Abstract Neal Hot Springs is an active geothermal area that is also the proposed location of a binary power plant, which is being developed by US Geothermal Inc. To date, two production wells have been drilled and an injection well is in the process of being completed. The primary goal of this field camp was to provide a learning experience for students studying geophysics, but a secondary goal was to characterize the Neal Hot Springs area to provide valuable information on the flow of geothermal fluids through the subsurface. This characterization was completed using a variety of

311

Near-inertial internal wave field in the Canada Basin from Ice-Tethered Profilers  

Science Conference Proceedings (OSTI)

Salinity and temperature profiles from drifting Ice-Tethered Profilers in the Beaufort Gyre region of the Canada Basin are used to characterize and quantify the regional near-inertial internal wave field over one year. Vertical displacements of ...

Hayley V. Dosser; Luc Rainville; John M. Toole

312

Savannah River Site Experiences in In Situ Field Measurements of Radioactive Materials  

Science Conference Proceedings (OSTI)

This paper discusses some of the field gamma-ray measurements made at the Savannah River Site, the equipment used for the measurements, and lessons learned during in situ identification and characterization of radioactive materials.

Moore, F.S.

1999-10-07T23:59:59.000Z

313

Variable impedance energy dissipation on the micro-scale : field responsive fluids in novel geometries  

E-Print Network (OSTI)

The aim of this thesis was to further characterize the effectiveness of field responsive fluids (FRFs) in geometries pertinent to the soldier and to examine the effects of specific geometric and kinematic parameters, ...

Griffin, Ryan A

2006-01-01T23:59:59.000Z

314

Context Matters: The Illusive Simplicity of Macaque V1 Receptive Fields  

E-Print Network (OSTI)

Even in V1, where neurons have well characterized classical receptive fields (CRFs), it has been difficult to deduce which features of natural scenes stimuli they actually respond to. Forward models based upon CRF stimuli ...

Haslinger, Robert Heinz

315

Magnetic anisotropy in a permalloy microgrid fabricated by near-field optical lithography  

Science Conference Proceedings (OSTI)

We report the fabrication and magnetic properties of permalloy microgrids prepared by near-field optical lithography and characterized using high-sensitivity magneto-optical Kerr effect techniques. A fourfold magnetic anisotropy induced by the grid architecture is identified.

S. P. Li; A. Lebib; D. Peyrade; M. Natali; Y. Chen; W. S. Lew; J. A. C. Bland

2001-01-01T23:59:59.000Z

316

Dynamic Phase Transitions In The Spin-2 Ising System Under An Oscillating Magnetic Field Within The Effective-Field Theory  

SciTech Connect

The dynamic phase transitions are studied in the spin-2 Ising model under a time-dependent oscillating magnetic field by using the effective-field theory with correlations. The effective-field dynamic equation is derived by employing the Glauber transition rates and the phases in the system are obtained by solving this dynamic equation. The nature (first- or second-order) of the dynamic phase transition is characterized by investigating the thermal behavior of the dynamic order parameter and the dynamic phase transition temperatures are obtained. The dynamic phase diagrams are presented in (T/zJ, h/zJ) plane.

Ertas, Mehmet; Keskin, Mustafa [Department of Physics, Erciyes University, 38039 Kayseri (Turkey); Deviren, Bayram [Department of Physics, Nevsehir University, 50300 Nevsehir (Turkey)

2010-12-23T23:59:59.000Z

317

Electric and Magnetic Field Exposure Levels (0 to 3 GHz) in Occupational Environments near Photovoltaic Energy Generation Facilities  

Science Conference Proceedings (OSTI)

Electric and magnetic field levels associated with photovoltaic energy generation facilities were measured and characterized in this study. This evaluation included the measurement of static (direct current [DC]) magnetic fields, power-frequency alternating current (AC) electric and magnetic fields (up to 3,000 Hz), and radio-frequency (RF) electric and magnetic fields (up to 3,000 MHz) at two electric utility solar generation facilities.The major sources of DC magnetic fields within a ...

2012-11-07T23:59:59.000Z

318

Strain sensors for high field pulse magnets  

Science Conference Proceedings (OSTI)

In this paper we present an investigation into several strain sensing technologies that are being considered to monitor mechanical deformation within the steel reinforcement shells used in high field pulsed magnets. Such systems generally operate at cryogenic temperatures to mitigate heating issues that are inherent in the coils of nondestructive, high field pulsed magnets. The objective of this preliminary study is to characterize the performance of various strain sensing technologies at liquid nitrogen temperatures (-196 C). Four sensor types are considered in this investigation: fiber Bragg gratings (FBG), resistive foil strain gauges (RFSG), piezoelectric polymers (PVDF), and piezoceramics (PZT). Three operational conditions are considered for each sensor: bond integrity, sensitivity as a function of temperature, and thermal cycling effects. Several experiments were conducted as part of this study, investigating adhesion with various substrate materials (stainless steel, aluminum, and carbon fiber), sensitivity to static (FBG and RFSG) and dynamic (RFSG, PVDF and PZT) load conditions, and sensor diagnostics using PZT sensors. This work has been conducted in collaboration with the National High Magnetic Field Laboratory (NHMFL), and the results of this study will be used to identify the set of sensing technologies that would be best suited for integration within high field pulsed magnets at the NHMFL facility.

Martinez, Christian [Los Alamos National Laboratory; Zheng, Yan [Los Alamos National Laboratory; Easton, Daniel [Los Alamos National Laboratory; Farinholt, Kevin M [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

319

Tank characterization reference guide  

Science Conference Proceedings (OSTI)

Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research.

De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J. [Los Alamos Technical Associates, Kennewick, WA (United States); Simpson, B.C. [Westinghouse Hanford Co., Richland, WA (United States)

1994-09-01T23:59:59.000Z

320

Assess the Efficacy of an Aerial Distant Observer Tool Capable of Rapid Analysis of Large Sections of Collector Fields: FY 2008 CSP Milestone Report, September 2008  

DOE Green Energy (OSTI)

We assessed the feasibility of developing an aerial Distant Observer optical characterization tool for collector fields in concentrating solar power plants.

Jorgensen, G.; Burkholder, F.; Gray, A.; Wendelin, T.

2009-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Characterization of Planar Transmission Lines  

Science Conference Proceedings (OSTI)

... References on: On-Wafer Measurement and Calibration, Planar Transmission Line Characterization and Multiconductor Transmission Lines. ...

2011-12-15T23:59:59.000Z

322

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2012 7, 2012 CX-009327: Categorical Exclusion Determination Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization CX(s) Applied: A9 Date: 09/27/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory September 26, 2012 CX-009434: Categorical Exclusion Determination Deployable Commercial Rooftop Solar Electric System CX(s) Applied: B5.15 Date: 09/26/2012 Location(s): New York Offices(s): Golden Field Office September 26, 2012 CX-009169: Categorical Exclusion Determination Virgin Islands State Energy Program CX(s) Applied: A9, A11 Date: 09/26/2012 Location(s): Virgin Islands Offices(s): Golden Field Office September 26, 2012 CX-009331: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and

323

Aluto-Langano Geothermal Field, Ethiopian Rift Valley- Physical  

Open Energy Info (EERE)

Aluto-Langano Geothermal Field, Ethiopian Rift Valley- Physical Aluto-Langano Geothermal Field, Ethiopian Rift Valley- Physical Characteristics And The Effects Of Gas On Well Performance Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Aluto-Langano Geothermal Field, Ethiopian Rift Valley- Physical Characteristics And The Effects Of Gas On Well Performance Details Activities (0) Areas (0) Regions (0) Abstract: This study, which focuses on the Aluto-Langano geothermal field, is part of the ongoing investigations of the geothermal systems in the Ethiopian Rift Valley. Aluto-Langano is a water-dominated gas-rich geothermal field, with a maximum temperature close to 360°C, in the Lakes District region of the Ethiopian Rift Valley. The upflow zone for the system lies along a deep, young NNE trending fault and is characterized by

324

CX-009328: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization CX(s) Applied: B3.6, B3.16 Date: 09/27/2012 Location(s): Oregon Offices(s): National Energy Technology Laboratory

325

Jankovic Aerosol Characterization.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization, Characterization, Aerosol Characterization, Interpretation, and Interpretation, and Application of Data Application of Data NSRC Symposium NSRC Symposium July 8, 2008 John Jankovic, CIH CIH Center for Nanophase Materials Sciences Center for Nanophase Materials Sciences Aerosol Characterization, Interpretation, and Aerosol Characterization, Interpretation, and Application of Data Application of Data Department of Energy (DOE) Nanoscale Science Research Centers (NSRC) developing Approach to Nanomaterial ES&H - The CNMS Approach * Establish Exposure Control Guideline (ECG) - Characterize Aerosol * Collect and interpret data * Assign Process to a Control Band Aerosol Particle Characterization * Size distribution (geometric mean and geometric standard deviation related to either mass, surface, or number)

326

Surfactant-enhanced alkaline flooding field project. Annual report  

SciTech Connect

The Tucker sand from Hepler field, Crawford County, Kansas, was characterized using routine and advanced analytical methods. The characterization is part of a chemical flooding pilot test to be conducted in the field, which is classified as a DOE Class I (fluvial-dominated delta) reservoir. Routine and advanced methods of characterization were compared. Traditional wireline logs indicate that the reservoir is vertically compartmentalized on the foot scale. Routine core analysis, X-ray computed tomography (CT), minipermeameter measurement, and petrographic analysis indicate that compartmentalization and lamination extend to the microscale. An idealized model of how the reservoir is probably structured (complex layering with small compartments) is presented. There was good agreement among the several methods used for characterization, and advanced characterization methods adequately explained the coreflood and tracer tests conducted with short core plugs. Tracer and chemical flooding tests were conducted in short core plugs while monitoring with CT to establish flow patterns and to monitor oil saturations in different zones of the core plugs. Channeling of injected fluids occurred in laboratory experiments because, on core plug scale, permeability streaks extended the full length of the core plugs. A graphic example of how channeling in field core plugs can affect oil recovery during chemical injection is presented. The small scale of compartmentalization indicated by plugs of the Tucker sand may actually help improve sweep between wells. The success of field-scale waterflooding and the fluid flow patterns observed in highly heterogeneous outcrop samples are reasons to expect that reservoir flow patterns are different from those observed with short core plugs, and better sweep efficiency may be obtained in the field than has been observed in laboratory floods conducted with short core plugs.

French, T.R.; Josephson, C.B.

1993-12-01T23:59:59.000Z

327

Japanese refrigerators field testing  

SciTech Connect

Residential refrigerators consume the equivalent of 1700 megawatts (MW) of baseload power in the Bonneville Power Administration (BPA) service area. Japanese manufacturers have designed refrigerator units that appear more energy efficient than some currently available American models. This report summarizes preliminary findings from field testing of 12 refrigerators of Japanese manufacture to evaluate annual kilowatt hour (kWh) use during actual operation. The units have also undergone laboratory testing sponsored by BPA at ETL Testing Laboratories, Inc. in Cortland, New York. A final report of the project -- due at the end of 1989 -- will correlate in detail the results of field and laboratory tests in comparison to performance ratings determined by the manufacturer.

Lou, A.T.

1989-03-01T23:59:59.000Z

328

Japanese Refrigerators Field Testing.  

SciTech Connect

Residential refrigerators consume the equivalent of 1700 megawatts (MW) of baseload power in the Bonneville Power Administration (BPA) service area. Japanese manufacturers have designed refrigerator units that appear more energy efficient than some currently available American models. This report summarizes preliminary findings from field testing of 12 refrigerators of Japanese manufacture to evaluate annual kilowatt hour (kWh) use during actual operation. The units have also undergone laboratory testing sponsored by BPA at ETL Testing Laboratories, Inc. in Cortland, New York. A final report of the project -- due at the end of 1989 -- will correlate in detail the results of field and laboratory tests in comparison to performance ratings determined by the manufacturer.

Lou, Albert T.

1989-03-01T23:59:59.000Z

329

Field Force Data Visualization  

Science Conference Proceedings (OSTI)

This report describes the development of a prototype data visualization app for utility workers. By using commercially available tablet technology, open standards, and open source software, utilities may be able to improve data capabilities of deployed field crews with modest investment in technology.BackgroundUtilities have been investing heavily in communications and information technology (IT) infrastructure in the past several years. While strides are being ...

2012-11-21T23:59:59.000Z

330

Ca rlsbad Field Office  

NLE Websites -- All DOE Office Websites (Extended Search)

En ergy En ergy Ca rlsbad Field Office P. O . Box 3090 Carlsbad , New Mexico 88221 AUG 2 9 2013 Mr. John E. Kieling , Chief Hazardous Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive East, Building 1 Santa Fe, New Mexico 87505-6303 Subject: Notification of Class 1 Permit Modification to the Waste Isolation Pilot Plant Hazardous Waste Facility Permit Number: NM4890139088-TSDF

331

Field Guide: Coatings Assessment  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has numerous products to help plant personnel meet the challenges of working with aging systems, structures, and components, but none that comprehensively address protective coatings and linings. This field guide provides a compilation of protective coating and lining information in a form that allows the user to have a ready reference available during condition assessment of the various protective coatings and linings used in the plant.

2012-05-14T23:59:59.000Z

332

Warped Conformal Field Theory  

E-Print Network (OSTI)

We study field theories in two spacetime dimensions invariant under a chiral scaling symmetry that acts only on right-movers. The local symmetries include one copy of the Virasoro algebra and a U(1) current algebra. This differs from the 2d conformal group, but in some respects is equally powerful in constraining the theory. In particular, the symmetries on a torus lead to modular covariance of the partition function, which is used to derive a universal formula for the asymptotic density of states. For an application we turn to the holographic description of black holes in quantum gravity, motivated by the fact that the symmetries in the near horizon geometry of any extremal black hole are identical to those of a 2d field theory with chiral scaling. We consider two examples: black holes in warped AdS_3 in topologically massive gravity, and in string theory. In both cases, the density of states in the 2d field theory reproduces the Bekenstein-Hawking entropy of black holes in the gravity theory.

Detournay, Stephane; Hofman, Diego M

2012-01-01T23:59:59.000Z

333

Warped Conformal Field Theory  

E-Print Network (OSTI)

We study field theories in two spacetime dimensions invariant under a chiral scaling symmetry that acts only on right-movers. The local symmetries include one copy of the Virasoro algebra and a U(1) current algebra. This differs from the 2d conformal group, but in some respects is equally powerful in constraining the theory. In particular, the symmetries on a torus lead to modular covariance of the partition function, which is used to derive a universal formula for the asymptotic density of states. For an application we turn to the holographic description of black holes in quantum gravity, motivated by the fact that the symmetries in the near horizon geometry of any extremal black hole are identical to those of a 2d field theory with chiral scaling. We consider two examples: black holes in warped AdS_3 in topologically massive gravity, and in string theory. In both cases, the density of states in the 2d field theory reproduces the Bekenstein-Hawking entropy of black holes in the gravity theory.

Stephane Detournay; Thomas Hartman; Diego M. Hofman

2012-10-01T23:59:59.000Z

334

Characterization of oil and gas reservoir heterogeneity  

SciTech Connect

The ultimate oojective of this cooperative research project is to characterize Alaskan petroleum reservoirs in terms of their reserves, physical and chemical properties, geologic configuration in relation to lithofacies and structure, and development potential. The project has two tasks: Task 1 is a geological description of the reservoirs including petrophysical properties, i.e., porosity, permeability, permeability variation, formation depth, temperature, and net pay, facies changes and reservoir structures as drawn from cores, well logs, and other geological data. Task 2 is reservoir fluid characterization--determination of physical properties of reservoir fluids including density, viscosity, phase distributions and composition as well as petrogenesis--source rock identification; and the study of asphaltene precipitation for Alaskan crude oils. This report presents a summary of technical progress of the well log analysis of Kuparuk Field, Northslope, Alaska.

Sharma, G.D.

1992-01-01T23:59:59.000Z

335

Furnace Black Characterization  

E-Print Network (OSTI)

Furnace Black Characterization Sid Richardson Carbon Co Fort Worth, TX Dr. Michel Gerspacher #12 of Crystallographic Studies #12;005F7 Methodologies #12;005F8 Summary · For all furnace carbon black 12? Surface Unorganized Carbon Identified #12;005F11 SRCC's Model #12;005F12 Carbon Black Surface Activity

336

Tank Characterization Database (TCD) Data Dictionary: Version 4.0  

Science Conference Proceedings (OSTI)

This document is the data dictionary for the tank characterization database (TCD) system and contains information on the data model and SYBASE{reg_sign} database structure. The first two parts of this document are subject areas based on the two different areas of the (TCD) database: sample analysis and waste inventory. Within each subject area is an alphabetical list of all the database tables contained in the subject area. Within each table defintiion is a brief description of the table and alist of field names and attributes. The third part, Field Descriptions, lists all field names in the data base alphabetically.

NONE

1996-04-01T23:59:59.000Z

337

Seismic Determination of Reservoir Heterogeneity: Application to the Characterization of Heavy Oil Reservoirs  

Science Conference Proceedings (OSTI)

The objective of the project was to examine how seismic and geologic data could be used to improve characterization of small-scale heterogeneity and their parameterization in reservoir models. The study was performed at West Coalinga Field in California.

Imhof, Matthias G.; Castle, James W.

2003-03-12T23:59:59.000Z

338

Intelligent seismic inversion workflow for high-resolution reservoir characterization  

Science Conference Proceedings (OSTI)

Developing a geological model is the first and a very important step during the reservoir simulation and modeling process. The geological model usually represents our best interpretation of the reservoir characteristics that extends beyond the well where ... Keywords: Buffalo Valley Field, Neural networks, Reservoir characterization, Seismic inversion

E. Artun; S. Mohaghegh

2011-02-01T23:59:59.000Z

339

3X-100 blade field test.  

DOE Green Energy (OSTI)

In support of a Work-For-Other (WFO) agreement between the Wind Energy Technology Department at Sandia National Laboratories and 3TEX, one of the three Micon 65/13M wind turbines at the USDA Agriculture Research Service (ARS) center in Bushland, Texas, has been used to test a set of 9 meter wind turbine blades, manufactured by TPI composites using the 3TEX carbon material for the spar cap. Data collected from the test has been analyzed to evaluate both the aerodynamic performance and the structural response from the blades. The blades aerodynamic and structural performance, the meteorological inflow and the wind turbine structural response has been monitored with an array of 57 instruments: 15 to characterize the blades, 13 to characterize inflow, and 15 to characterize the time-varying state of the turbine. For the test, data was sampled at a rate of 40 Hz using the ATLAS II (Accurate GPS Time-Linked Data Acquisition System) data acquisition system. The system features a time-synchronized continuous data stream and telemetered data from the turbine rotor. This paper documents the instruments and infrastructure that have been developed to monitor these blades, turbines and inflow, as well as both modeling and field testing results.

Zayas, Jose R.; Johnson, Wesley D.

2008-03-01T23:59:59.000Z

340

Characterization methods for ultrasonic test systems  

SciTech Connect

Methods for the characterization of ultrasonic transducers (search units) and instruments are presented. The instrument system is considered as three separate components consisting of a transducer, a receiver-display, and a pulser. The operation of each component is assessed independently. The methods presented were chosen because they provide the greatest amount of information about component operation and were not chosen based upon such conditions as cost, ease of operation, field implementation, etc. The results of evaluating a number of commercially available ultrasonic test instruments are presented.

Busse, L.J.; Becker, F.L.; Bowey, R.E.; Doctor, S.R.; Gribble, R.P.; Posakony, G.J.

1982-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Three-dimensional magnetotelluric characterization of the Coso geothermal  

Open Energy Info (EERE)

magnetotelluric characterization of the Coso geothermal magnetotelluric characterization of the Coso geothermal field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Three-dimensional magnetotelluric characterization of the Coso geothermal field Details Activities (1) Areas (1) Regions (0) Abstract: A dense grid of 125 magnetotelluric (MT) stations plus a single line of contiguous bipole array profiling has been acquired over the east flank of the Coso geothermal system, CA, USA. Due to production related electromagnetic (EM) noise the permanent observatory at Parkfield, CA was used as a remote reference to suppress this cultural EM noise interference. These data have been inverted to a fully three-dimensional (3D) resistivity model. This model shows the controlling geological structures possibly

342

Golden Field Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Department of Energy Golden Field Office 1617 Cole Boulevard Golden, Colorado 80401-3393 FINDING OF NO SIGNIFICANT IMPACT UNIVERSITY OF MAINE'S DEEPWATER OFFSHORE FLOATING WIND TURBINE TESTING AND DEMONSTRATION PROJECT - CASTINE DOE/EA-1792-S1 AGENCY: U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy ACTION: Finding of No Significant Impact (FONSI) SUMMARY: The U.S. Department of Energy (DOE) has completed a Supplemental Environmental Assessment (Supplemental EA) DOE/EA-1792-S1 for the University of Maine's (UMaine) Deepwater Offshore Floating Wind Turbine Testing and Demonstration Project - Castine. DOE prepared the Supplemental EA to evaluate the potential environmental impacts of

343

Quasi light fields: Extending the light field to coherent radiation  

E-Print Network (OSTI)

Imaging technologies such as dynamic viewpoint generation are engineered for incoherent radiation using the traditional light field, and for coherent radiation using electromagnetic field theory. We present a model of ...

Accardi, Anthony J.

344

ABRUPT LONGITUDINAL MAGNETIC FIELD CHANGES IN FLARING ACTIVE REGIONS  

Science Conference Proceedings (OSTI)

We characterize the changes in the longitudinal photospheric magnetic field during 38 X-class and 39 M-class flares within 65{sup 0} of disk center using 1 minute GONG magnetograms. In all 77 cases, we identify at least one site in the flaring active region where clear, permanent, stepwise field changes occurred. The median duration of the field changes was about 15 minutes and was approximately equal for X-class and for M-class flares. The absolute values of the field changes ranged from the detection limit of {approx}10 G to as high as {approx}450 G in two exceptional cases. The median value was 69 G. Field changes were significantly stronger for X-class than for M-class flares and for limb flares than for disk-center flares. Longitudinal field changes less than 100 G tended to decrease longitudinal field strengths, both close to disk center and close to the limb, while field changes greater than 100 G showed no such pattern. Likewise, longitudinal flux strengths tended to decrease during flares. Flux changes, particularly net flux changes near disk center, correlated better than local field changes with GOES peak X-ray flux. The strongest longitudinal field and flux changes occurred in flares observed close to the limb. We estimate the change of Lorentz force associated with each flare and find that this is large enough in some cases to power seismic waves. We find that longitudinal field decreases would likely outnumber increases at all parts of the solar disk within 65{sup 0} of disk center, as in our observations, if photospheric field tilts increase during flares as predicted by Hudson et al.

Petrie, G. J. D. [National Solar Observatory, 950 N. Cherry Avenue, Tucson, AZ 85719 (United States); Sudol, J. J. [West Chester University, West Chester, PA 19383 (United States)

2010-12-01T23:59:59.000Z

345

Isotopic Effect on Ion Mobility and Separation of Isotopomers by High-Field Ion Mobility  

E-Print Network (OSTI)

Isotopic Effect on Ion Mobility and Separation of Isotopomers by High-Field Ion Mobility ions, including isotopomers and isobars, using ion mobility spectrometry (IMS), specifically, the field about the ion geometry, potentially enabling a new approach to molecular structure characterization

Clemmer, David E.

346

Electro-Optical Characterization  

DOE Green Energy (OSTI)

In the Electro-Optical Characterization group, within the National Center for Photovoltaic's Measurements and Characterization Division, we use various electrical and optical experimental techniques to relate photovoltaic device performance to the methods and materials used to produce them. The types of information obtained by these techniques range from small-scale atomic-bonding information to large-scale macroscopic quantities such as optical constants and electron-transport properties. Accurate and timely measurement of the electro-optical properties as a function of device processing provides researchers and manufacturers with the knowledge needed to troubleshoot problems and develop the knowledge base necessary for reducing cost, maximizing efficiency, improving reliability, and enhancing manufacturability. We work collaboratively with you to solve materials- and device-related R&D problems. This sheet summarizes our primary techniques and capabilities.

Not Available

2006-06-01T23:59:59.000Z

347

Efficient thermal field computation in phase-field models  

Science Conference Proceedings (OSTI)

We solve the phase-field equations in two dimensions to simulate crystal growth in the low undercooling regime. The novelty is the use of a fast solver for the free space heat equation to compute the thermal field. This solver is based on the efficient ... Keywords: Crystal growth, Dendritic solidification, Diffusion equation, Fast solvers, Integral representation, Phase-field, Unbounded domain

Jing-Rebecca Li; Donna Calhoun; Lucien Brush

2009-12-01T23:59:59.000Z

348

Electric Field Reversal in Sprite Electric Field Signature  

Science Conference Proceedings (OSTI)

In measurements of the electric field associated with the current of a sprite 450 km from ground-based field sensors, it was observed that the sign of the electric field was positive when positive charge was lowered from the ionosphere. A recent ...

Richard G. Sonnenfeld; William W. Hager

2013-05-01T23:59:59.000Z

349

Near field and altered zone environmental report Volume I: technical bases for EBS design  

SciTech Connect

This report presents an updated summary of results for the waste package (WP) and engineered barrier system (EBS) evaluations, including materials testing, waste-form characterization, EBS performance assessments, and near-field environment (NFE) characterization. Materials testing, design criteria and concept development, and waste-form characterization all require an understanding of the environmental conditions that will interact with the WP and EBS. The Near-Field Environment Report (NFER) was identified in the Waste Package Plan (WPP) (Harrison- Giesler, 1991) as the formal means for transmitting and documenting this information.

Wilder, D. G., LLNL

1997-08-01T23:59:59.000Z

350

Fracture characterization study  

DOE Green Energy (OSTI)

First, the origin, nature, and significance of fractures in general are discussed. Next, discussions are directed toward the designation and classification of fractures. Some typical fracture measurement techniques are discussed. Finally, geothermal fracture systems are investigated and correlations made to determine which fracture technologies from oil field work are applicable to geothermal systems. (MHR)

Kehrman, R.F.

1978-04-01T23:59:59.000Z

351

Field Raman Spectrograph for Environmental Analysis  

SciTech Connect

The widespread contamination found across the US Department of Energy (DOE) complex has received considerable attention from the government and public alike. A massive site characterization and cleanup effort has been underway for several years and is expected to continue for several decades more. The scope of the cleanup effort ranges from soil excavation and treatment to complete dismantling and decontamination of whole buildings. To its credit, DOE has supported research and development of new technologies to speed up and reduce the cost of this effort. One area in particular has been the development of portable instrumentation that can be used to perform analytical measurements in the field. This approach provides timely data to decision makers and eliminates the expense, delays, and uncertainties of sample preservation, transport, storage, and laboratory analysis. In this program, we have developed and demonstrated in the field a transportable, high performance Raman spectrograph that can be used to detect and identify contaminants in a variety of scenarios. With no moving parts, the spectrograph is rugged and can perform many Raman measurements in situ with flexible fiber optic sampling probes. The instrument operates under computer control and a software package has been developed to collect and process spectral data. A collection of Raman spectra for 200 contaminants of DOE importance has been compiled in a searchable format to assist in the identification of unknown contaminants in the field.

Sylvia, J.M.; Haas, J.W.; Spencer, K.M.; Carrabba, M.M.; Rauh, R.D.; Forney, R.W.; Johnston, T.M.

1998-07-01T23:59:59.000Z

352

New 'Tool Box' Approaches for Innovative Characterization of NAPL at MGP Sites  

Science Conference Proceedings (OSTI)

This report contains papers presented at a workshop held by EPRI's Contaminant Characterization and Source Attribution project on June 23, 2004. The project seeks to improve risk management and decision making by delivering better methods and new scientific information for characterizing soils, non-aqueous phase liquids (NAPLs), and groundwater at manufactured gas plant (MGP) sites. This research will deliver improved conventional methods as well as new methods for characterizing NAPLs, including field a...

2004-12-27T23:59:59.000Z

353

Measurements and Characterization (Fact Sheet)  

SciTech Connect

Capabilities fact sheet for the National Center for Photovoltaics: Measurements and Characterization that includes scope, core competencies and capabilities, and contact/web information for Analytical Microscopy, Electro-Optical Characterization, Surface Analysis, and Cell and Module Performance.

Not Available

2011-06-01T23:59:59.000Z

354

Electric Fields in a Tokamak  

E-Print Network (OSTI)

A self-consistent analysis of the electric fields in a tokamak yields the result that the poloidal and radial electrostatic fields must vanish for a toroidally symmetric equilibrium.

Johnson, Robert W

2008-01-01T23:59:59.000Z

355

Wavelets and Field Forecast Verification  

Science Conference Proceedings (OSTI)

Current field forecast verification measures are inadequate, primarily because they compress the comparison between two complex spatial field processes into one number. Discrete wavelet transforms (DWTs) applied to analysis and contemporaneous ...

William M. Briggs; Richard A. Levine

1997-06-01T23:59:59.000Z

356

Diamond-graphite field emitters  

DOE Patents (OSTI)

A field emission electron emitter comprising an electrode of diamond and a conductive carbon, e.g., graphite, is provided.

Valone, Steven M. (Santa Fe, NM)

1997-01-01T23:59:59.000Z

357

Direct drive field actuator motors  

DOE Patents (OSTI)

A positive-drive field actuator motor is described which includes a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 62 figs.

Grahn, A.R.

1998-03-10T23:59:59.000Z

358

Revitalizing an old oil field  

Science Conference Proceedings (OSTI)

Redevelopment of the Olney oil field in Illinois is described. First discovered in 1936, production peaked in 1941 when over 30,000 bopd were produced. In 1970, 600 wells in the Olney field pumped only 4000 bpd. Since the decontrol of crude oil prices, a redevelopment project has begun in the field. The project includes well stimulation techniques plus newly drilled or deepened wells. Present production in the Olney field has reached 5000 bopd.

Ortiz, S.

1981-12-01T23:59:59.000Z

359

NERSC Benchmarking and Workload Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

Petascale Initiative Science Gateway Development Storage and IO Technologies Testbeds Home R & D Benchmarking & Workload Characterization Benchmarking & Workload...

360

Materials Characterization | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Nuclear Forensics Scanning Probes Related Research Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science &...

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Advanced Characterization, Modeling, and Performance  

Science Conference Proceedings (OSTI)

Characterization of Nuclear Reactor Materials and Components with Neutron ... Hume-Rothery Award Symposium: Electronic structure theory of stability and...

362

Categorical Exclusion Determinations: A9 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

18, 2010 18, 2010 CX-004292: Categorical Exclusion Determination Small Scale Electrical Power Generation from Low-Temperature Geothermal Process Water Utilized in a Mining Operation CX(s) Applied: A9, B3.1, B3.6 Date: 10/18/2010 Location(s): Reno, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 18, 2010 CX-004284: Categorical Exclusion Determination Recovery Act: Conducting a 3-Dimensional Converted Shear Wave Project CX(s) Applied: A9, B3.1, B3.7 Date: 10/18/2010 Location(s): Imperial County, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 18, 2010 CX-004282: Categorical Exclusion Determination Characterizing Stimulation Domains for Improved Well Completions in Gas Shales CX(s) Applied: A9

363

Categorical Exclusion Determinations: B3.1 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 23, 2010 September 23, 2010 CX-003924: Categorical Exclusion Determination Delineation, Identification, Characterization, and Clean Up of Suspected Waste Area CX(s) Applied: B3.1, B6.1 Date: 09/23/2010 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory September 22, 2010 CX-003985: Categorical Exclusion Determination Regional Biomass Feedstock Partnership CX(s) Applied: B3.1, B5.1 Date: 09/22/2010 Location(s): Onaway, Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 22, 2010 CX-004001: Categorical Exclusion Determination Regional Biomass Feedstock Partnership CX(s) Applied: B3.1, B5.1 Date: 09/22/2010 Location(s): South Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

364

Categorical Exclusion Determinations: Texas | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 2, 2012 October 2, 2012 CX-009237: Categorical Exclusion Determination The Dow Chemical Company CX(s) Applied: B5.7 Date: 10/02/2012 Location(s): Texas Offices(s): Fossil Energy September 27, 2012 CX-009327: Categorical Exclusion Determination Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization CX(s) Applied: A9 Date: 09/27/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory September 20, 2012 CX-009218: Categorical Exclusion Determination Replace Sparge Piping at Bryan Mound Raw Water Intake Structure CX(s) Applied: B1.3 Date: 09/20/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office September 19, 2012 CX-009359: Categorical Exclusion Determination Houston Zero Emission Delivery Vehicle Deployment

365

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 CX-006473: Categorical Exclusion Determination Novel Mechanical Pretreatment for Lignocellulosic Feedstocks CX(s) Applied: A9, B3.6 Date: 08/11/2011 Location(s): Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 11, 2011 CX-006461: Categorical Exclusion Determination Production and Characterization of Novel Photovoltaic Materials? A Minority University Research Associates Program at North Carolina Central University CX(s) Applied: A9, B3.6 Date: 08/11/2011 Location(s): St. Durham, North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 11, 2011 CX-006450: Categorical Exclusion Determination Flash Foods Job Creation and Petroleum Independence for Higher Ethanol Blends CX(s) Applied: B5.1

366

Golden Field Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

80401 -3393 DOEIEA-1818 80401 -3393 DOEIEA-1818 FINDING OF NO SIGNIFICANT IMPACT PETTISVILLE WIND ENERGY PROJECT AGENCY: U.S . Department of Energy, Golden Field Office ACTION: Finding of No Significant Impact (FONSI) SUMMARY: The U.S. Department of Energy (DOE) provided Federal funding to the Ohio Department of Development (0000) under the State Energy Program (SEP). 0000 proposes to provide $1 ,225 ,000 of its SEP funds to the Pettisvil Ie Local Schools (Pettisville) for the Pettisville Local Schools Wind Energy Project (Wind Energy Project). DOE' s Proposed Action is to authorize the expenditure of Federal funding under State Energy Program to design, permit, and construct the Pettisville Wind Energy Project, a 750-kilowatt wind turbine at the Pettisville Pre-Kindergarten through Twelfth Grade School located at

367

Golden Field Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1617 Cole Boulevard Golden , Colorado 80401-3393 DOE/EA-1791 FINDING OF NO SIGNIFICANT IMPACT UNIVERSITY OF MINNESOTA WIND ENERGY RESEARCH CONSORTIllM PROJECT AGENCY: U.S. Department of Energy, Golden Field Office ACTION : Finding of No Significant Impact (FONSI) SUMMARY: The U. S. Department of Energy (DOE) is proposing to authorize the expenditure of Federal funding by the University of Minnesota to design, permit, and construct a wind turbine research facility I. This funding has been appropriated under the American Recovery and Reinvestment Act of2009. The University would use the funding to install a wind turbine research facility at its University of Minnesota Outreach Research and Education (UMore) Park in Rosemount, Minnesota. The proposed research facility would consist of a 2.5-megawatt-

368

Golden Field Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINDING OF NO SIGNIFICANT IMPACT FINDING OF NO SIGNIFICANT IMPACT MONARCH WARREN COUNTY WIND TURBINE PROJECT LENOX TOWNSIDP, WARREN COUNTY, IL AGENCY: U.S. Department of Energy (DOE), Golden Field Office ACTION: Finding orNo Significant Impact (FONS!) DOEIEA-JSOO SUMMARY: The U.S. Department of Energy (DOE) provided Federal funding appropriated under the American Reinvestment and Recovery Act 0(2009 to the Illinois Department ofComrnerce and Econom ic Opportunity (DeEO) under the State Energy Program (SEP). DeEO proposes to provide approximately $5 million of its SEP funds to Monarch Wind Power (MWP) for the Monarch Warren County Wind Turbine Project (MWTP). DOE's Proposed Action is to authorize the expenditure of Federal funding under State Energy Program to design, permit, and construct

369

ARM - Field Campaigns  

NLE Websites -- All DOE Office Websites (Extended Search)

alpacas clouds-anvil german-scene instrumentfield pye-night racoro-inst rhubc-layout snowy-site twpice-ship walter-annemarie alpacas clouds-anvil german-scene instrumentfield pye-night racoro-inst rhubc-layout snowy-site twpice-ship walter-annemarie How Do I Propose a Campaign? First, review the guidelines for submitting proposals. Next, submit a preproposal; a short summary of the proposed campaign. Wait for a response from the Infrastructure Management Board (IMB) and/or ARM Science Board. A full proposal or science plan, may be requested. Decision is made-now what is expected? ARM Climate Research Facility users regularly conduct field campaigns to augment routine data acquisitions and to test and validate new instruments. Announcements 13 Dec 2013 Now accepting proposals for use of an AMF, AAF, or augment observations at one of our fixed sites. Smaller campaigns in FY2014 and FY2015 can also be

370

Magnetic-field-dosimetry system  

DOE Patents (OSTI)

A device is provided for measuring the magnetic field dose and peak field exposure. The device includes three Hall-effect sensors all perpendicular to each other, sensing the three dimensional magnetic field and associated electronics for data storage, calculating, retrieving and display.

Lemon, D.K.; Skorpik, J.R.; Eick, J.L.

1981-01-21T23:59:59.000Z

371

Low field magnetic resonance imaging  

DOE Patents (OSTI)

A method and system of magnetic resonance imaging does not need a large homogenous field to truncate a gradient field. Spatial information is encoded into the spin magnetization by allowing the magnetization to evolve in a non-truncated gradient field and inducing a set of 180 degree rotations prior to signal acquisition.

Pines, Alexander (Berkeley, CA); Sakellariou, Dimitrios (Billancourt, FR); Meriles, Carlos A. (Fort Lee, NJ); Trabesinger, Andreas H. (London, GB)

2010-07-13T23:59:59.000Z

372

REGIONAL-SCALE WIND FIELD CLASSIFICATION EMPLOYING CLUSTER ANALYSIS  

DOE Green Energy (OSTI)

The classification of time-varying multivariate regional-scale wind fields at a specific location can assist event planning as well as consequence and risk analysis. Further, wind field classification involves data transformation and inference techniques that effectively characterize stochastic wind field variation. Such a classification scheme is potentially useful for addressing overall atmospheric transport uncertainty and meteorological parameter sensitivity issues. Different methods to classify wind fields over a location include the principal component analysis of wind data (e.g., Hardy and Walton, 1978) and the use of cluster analysis for wind data (e.g., Green et al., 1992; Kaufmann and Weber, 1996). The goal of this study is to use a clustering method to classify the winds of a gridded data set, i.e, from meteorological simulations generated by a forecast model.

Glascoe, L G; Glaser, R E; Chin, H S; Loosmore, G A

2004-06-17T23:59:59.000Z

373

Temporal Velocity Variations beneath the Coso Geothermal Field Observed  

Open Energy Info (EERE)

Velocity Variations beneath the Coso Geothermal Field Observed Velocity Variations beneath the Coso Geothermal Field Observed using Seismic Double Difference Tomography of Compressional and Shear Wave Arrival Times Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: Temporal Velocity Variations beneath the Coso Geothermal Field Observed using Seismic Double Difference Tomography of Compressional and Shear Wave Arrival Times Details Activities (1) Areas (1) Regions (0) Abstract: Microseismic imaging can be an important tool for characterizing geothermal reservoirs. Since microseismic sources occur more or less continuously both due to the operations of a geothermal field and the naturally occurring background seismicity, passive seismic monitoring is well suited to quantify the temporal variations in the vicinity of a

374

EMDEX (Electric and Magnetic Field Digital EXposure) system manuals  

Science Conference Proceedings (OSTI)

The EPRI Electric and Magnetic Field Digital EXposure (EMDEX) system consists of hardware and software for characterizing electric and magnetic field exposures. The EMDEX meter is a computer-based portable unit that samples, at a user-programmable rate, the three vector components of magnetic flux density, a measure of the average electric field acting on the torso of the wearer (if an optional sensor is worn) and a measure of rotational motion of the meter in the earth's magnetic field. Modules of the DATACALC software package are used to program the EMDEX, retrieve data at the end of a measurement session, analyze EMDEX data, and prepare tabular and graphical data summaries. The User Manual is designed to provide instruction on the use of the exposure system hardware and software. The Technical Reference Manual provides additional, detailed descriptions of the hardware, software and methodologies used in the EMDEX system.

Not Available

1989-10-01T23:59:59.000Z

375

Thermal techniques for characterizing magma body geometries | Open Energy  

Open Energy Info (EERE)

techniques for characterizing magma body geometries techniques for characterizing magma body geometries Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Thermal techniques for characterizing magma body geometries Details Activities (1) Areas (1) Regions (0) Abstract: The surface heat flux distribution resulting from emplaced magma bodies can be used to help characterize the magma source. Closed-form analytical solutions for the conduction heat transfer from various idealized magma geometries (dikes, sills, and spheres) are obtained using either the Schwarz-Christoffel transformation theorem (dikes and sills) or the 'method of images' with superposition (spheres). Comparison of these analytically determined heat flux distributions with field data from active geothermal areas at Yellowstone, Avachinsky volcano, Kilauea Iki,

376

Field practice internship final report  

SciTech Connect

This field practice internship final report gives an overview of the field practice, which was completed at the Oak Ridge Y-12 Plant, Martin Marietta Energy Systems, Inc., Environmental Management Department, Oak Ridge, Tennessee. The field practice focused on the completion of the Superfund Amendments and Reauthorization Act (SARA) Title III, Emergency Planning and Community Right-to-Know Act Section 312, Tier II Report. The field practice internship was conducted on a full-time basis between December 13, 1993 through February 18, 1994. Sheila Poligone, Emergency Planning and Community Right-to-Know Act (EPCRA) Coordinator served as the field practice preceptor.

Foster, T.

1994-05-01T23:59:59.000Z

377

Optical Characterization Laboratory (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Optical Characterization Laboratory at the Energy Systems Integration Facility. The Optical Characterization Laboratory at NREL's Energy Systems Integration Facility (ESIF) conducts optical characterization of large solar concentration devices. Concentration solar power (CSP) mirror panels and concentrating solar systems are tested with an emphasis is on measurement of parabolic trough mirror panels. The Optical Characterization Laboratory provides state-of-the-art characterization and testing capabilities for assessing the optical surface quality and optical performance for various CSP technologies including parabolic troughs, linear Fresnel, dishes, and heliostats.

Not Available

2011-10-01T23:59:59.000Z

378

Ferrocyanide waste simulant characterization  

Science Conference Proceedings (OSTI)

Ferrocyanide waste simulants were prepared and characterized to help assess safety concerns associated with the ferrocyanide sludges stored in underground single-shell waste tanks at the Hanford Site. Simulants were prepared to represent the variety of ferrocyanide sludges stored in the storage tanks. Physical properties, chemical compositions, and thermodynamic properties of the simulants were determined. The simulants, as produced, were shown to not sustain propagating reactions when subjected to a strong ignition source. Additional testing and evaluations are recommended to assess safety concerns associated with postulated ferrocyanide sludge dry-out and exposure to external ignition sources.

Jeppson, D.W.; Wong, J.J.

1993-01-01T23:59:59.000Z

379

Characterization of Photovoltaic Concentrators  

DOE Green Energy (OSTI)

This paper will describe the resources at the National Renewable Energy Laboratory (NREL) for performing characterization of photovoltaic (PV) materials designed for operation under concentrated light. NREL has the capability to measure devices ranging from very small, unencapsulated research cells to reasonably sized, environmentally protected modules. Data gathering and interpretation are also ongoing areas of revision and improvement. The main goal of the current research is to reduce the measurement uncertainty to the lowest practical value. At present, the state of the art is limited at a ?5% level in measuring efficiency accurately.

Kiehl, J.; Emery, E.

2005-01-01T23:59:59.000Z

380

Network Characterization Service (NCS)  

Science Conference Proceedings (OSTI)

Distributed applications require information to effectively utilize the network. Some of the information they require is the current and maximum bandwidth, current and minimum latency, bottlenecks, burst frequency, and congestion extent. This type of information allows applications to determine parameters like optimal TCP buffer size. In this paper, we present a cooperative information-gathering tool called the network characterization service (NCS). NCS runs in user space and is used to acquire network information. Its protocol is designed for scalable and distributed deployment, similar to DNS. Its algorithms provide efficient, speedy and accurate detection of bottlenecks, especially dynamic bottlenecks. On current and future networks, dynamic bottlenecks do and will affect network performance dramatically.

Jin, Guojun; Yang, George; Crowley, Brian; Agarwal, Deborah

2001-06-06T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

2-3 High Field Magnetic Resonance Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

HFMRF Overview HFMRF Overview High Field Magnetic Resonance Facility A significant portion of research conducted in the High Field Magnetic Resonance Facility (HFMRF) focuses on developing a fundamental, molecular-level understanding of biochemi- cal and biological systems and their response to environmental effects. A secondary focus is in materials science and catalysis and the chemical mechanisms and processes that operate in these areas. Resident and matrixed research staff within this facility offer expertise in the areas of structural biology, solid-state materials characterization, and magnetic resonance imaging (MRI) techniques. Instrumentation & Capabilities NMR * 900-MHz NMR (operational in 2004) * 800-MHz NMR * 750-MHz NMR * 600-MHz NMR (2 systems)

382

EUV Dark-Field Microscopy for Defect Inspection  

SciTech Connect

An actinic EUV microscope for defect detection on mask blanks for operation in dark field using a table-top discharge-produced plasma source has been developed. Several test structures (pits and bumps) on multilayer mirrors were investigated by our Schwarzschild objective-based EUV microscope at 13.5-nm wavelength and then characterized with an atomic force microscope. Possible defect-detection limits with large field of view and moderate magnification are discussed in terms of required irradiation dose and system performance.

Juschkin, L.; Maryasov, A.; Herbert, S. [Chair for Technology of Optical Systems (TOS), RWTH Aachen University and JARA - Fundamentals of Future Information Technology, Steinbachstr. 15, 52074 Aachen (Germany); Aretz, A. [Central Facility for Electron Microscopy (GFE), RWTH Aachen University and JARA - Fundamentals of Future Information Technology, Ahornstrasse 52074 Aachen (Germany); Bergmann, K. [Fraunhofer Institute for Laser Technology, Steinbachstr. 15, 52074 Aachen (Germany); Lebert, R. [Bruker Advanced Supercon GmbH, Friedrich-Ebert-Strasse 1, 51429 Bergisch Gladbach (Germany)

2011-09-09T23:59:59.000Z

383

Vadose Zone Characterization Techniques Developed by EMSP Research  

Science Conference Proceedings (OSTI)

This paper discusses research contributions made by Environmental Management Science Program (EMSP) research in the area of geophysical characterization of the subsurface. The goal of these EMSP research projects is to develop combined high-resolution measurement and interpretation packages that provide accurate, timely information needed to characterize the vadose zone. Various types of geophysical imaging techniques can be used to characterize the shallow subsurface. Since individual geophysical characterization tools all have specific limitations, many different techniques are being explored to provide more widespread applicability over a range of hydrogeologic settings. A combination of laboratory, field, theoretical, and computational studies are necessary to develop our understanding of how contaminants move through the vadose zone. This entails field tests with field-hardened systems, packaging and calibration of instrumentation, data processing and analysis algorithms, forward and inverse modeling, and so forth. DOE sites are seeking to team with EMSP researchers to leverage the basic science research investment and apply these advances to address subsurface contamination issues that plague many U.S. Department of Energy (DOE) sites.

Guillen, Donna P.

2003-02-24T23:59:59.000Z

384

Field Evaluation of Windows  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluation of Windows Evaluation of Windows Last Updated: 10/20/2009 Various tools can be used to evaluate windows in the field. Unless a new window still has the NFRC label attached to it, it is nearly impossible to determine by sight what the thermal and optical performance of a window is. These tools can provide information, such as low-e coating, gap width and gas fill, that can be used to approximate the performance of a window. Solar gain and Low-e detector This device can be used to determine if a low-e coating is present in the window, what type of coating it is, and where it is located. The type of low-e coating will indicate the amount of solar gain that is admitted through the coating. Readings can be "low", "medium" or "high". The device will also indicate on which glass surface the low-e coating is in relation to the position of the device. Limitations: Only works on glass of 1/8" (3 mm) or thinner. Cost: around $350 from EDTM.com

385

Electronic field permeameter  

DOE Patents (OSTI)

For making rapid, non-destructive permeability measurements in the field, a portable minipermeameter of the kind having a manually-operated gas injection tip is provided with a microcomputer system which operates a flow controller to precisely regulate gas flow rate to a test sample, and reads a pressure sensor which senses the pressure across the test sample. The microcomputer system automatically turns on the gas supply at the start of each measurement, senses when a steady-state is reached, collects and records pressure and flow rate data, and shuts off the gas supply immediately after the measurement is completed. Preferably temperature is also sensed to correct for changes in gas viscosity. The microcomputer system may also provide automatic zero-point adjustment, sensor calibration, over-range sensing, and may select controllers, sensors, and set-points for obtaining the most precise measurements. Electronic sensors may provide increased accuracy and precision. Preferably one microcomputer is used for sensing instrument control and data collection, and a second microcomputer is used which is dedicated to recording and processing the data, selecting the sensors and set-points for obtaining the most precise measurements, and instructing the user how to set-up and operate the minipermeameter. To provide mass data collection and user-friendly operation, the second microcomputer is preferably a lap-type portable microcomputer having a non-volatile or battery-backed CMOS memory.

Chandler, Mark A. (Madison, WI); Goggin, David J. (Austin, TX); Horne, Patrick J. (Austin, TX); Kocurek, Gary G. (Roundrock, TX); Lake, Larry W. (Austin, TX)

1989-01-01T23:59:59.000Z

386

Mound facility physical characterization  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide a baseline physical characterization of Mound`s facilities as of September 1993. The baseline characterizations are to be used in the development of long-term future use strategy development for the Mound site. This document describes the current missions and alternative future use scenarios for each building. Current mission descriptions cover facility capabilities, physical resources required to support operations, current safety envelope and current status of facilities. Future use scenarios identify potential alternative future uses, facility modifications required for likely use, facility modifications of other uses, changes to safety envelope for the likely use, cleanup criteria for each future use scenario, and disposition of surplus equipment. This Introductory Chapter includes an Executive Summary that contains narrative on the Functional Unit Material Condition, Current Facility Status, Listing of Buildings, Space Plans, Summary of Maintenance Program and Repair Backlog, Environmental Restoration, and Decontamination and Decommissioning Programs. Under Section B, Site Description, is a brief listing of the Site PS Development, as well as Current Utility Sources. Section C contains Site Assumptions. A Maintenance Program Overview, as well as Current Deficiencies, is contained within the Maintenance Program Chapter.

Tonne, W.R.; Alexander, B.M.; Cage, M.R.; Hase, E.H.; Schmidt, M.J.; Schneider, J.E.; Slusher, W.; Todd, J.E.

1993-12-01T23:59:59.000Z

387

FRACTURING FLUID CHARACTERIZATION FACILITY  

SciTech Connect

Hydraulic fracturing technology has been successfully applied for well stimulation of low and high permeability reservoirs for numerous years. Treatment optimization and improved economics have always been the key to the success and it is more so when the reservoirs under consideration are marginal. Fluids are widely used for the stimulation of wells. The Fracturing Fluid Characterization Facility (FFCF) has been established to provide the accurate prediction of the behavior of complex fracturing fluids under downhole conditions. The primary focus of the facility is to provide valuable insight into the various mechanisms that govern the flow of fracturing fluids and slurries through hydraulically created fractures. During the time between September 30, 1992, and March 31, 2000, the research efforts were devoted to the areas of fluid rheology, proppant transport, proppant flowback, dynamic fluid loss, perforation pressure losses, and frictional pressure losses. In this regard, a unique above-the-ground fracture simulator was designed and constructed at the FFCF, labeled ''The High Pressure Simulator'' (HPS). The FFCF is now available to industry for characterizing and understanding the behavior of complex fluid systems. To better reflect and encompass the broad spectrum of the petroleum industry, the FFCF now operates under a new name of ''The Well Construction Technology Center'' (WCTC). This report documents the summary of the activities performed during 1992-2000 at the FFCF.

Subhash Shah

2000-08-01T23:59:59.000Z

388

Recovery Boiler Superheater Ash Corrosion Field Study  

SciTech Connect

With the trend towards increasing the energy efficiency of black liquor recovery boilers operated in North America, there is a need to utilize superheater tubes with increased corrosion resistance that will permit operation at higher temperatures and pressures. In an effort to identify alloys with improved corrosion resistance under more harsh operating conditions, a field exposure was conducted that involved the insertion of an air-cooled probe, containing six candidate alloys, into the superheater section of an operating recovery boiler. A metallographic examination, complete with corrosion scale characterization using EMPA, was conducted after a 1,000 hour exposure period. Based on the results, a ranking of alloys based on corrosion performance was obtained.

Keiser, James R [ORNL; Kish, Joseph [McMaster University; Singbeil, Douglas [FPInnovations

2010-01-01T23:59:59.000Z

389

Mixed waste characterization reference document  

SciTech Connect

Waste characterization and monitoring are major activities in the management of waste from generation through storage and treatment to disposal. Adequate waste characterization is necessary to ensure safe storage, selection of appropriate and effective treatment, and adherence to disposal standards. For some wastes characterization objectives can be difficult and costly to achieve. The purpose of this document is to evaluate costs of characterizing one such waste type, mixed (hazardous and radioactive) waste. For the purpose of this document, waste characterization includes treatment system monitoring, where monitoring is a supplement or substitute for waste characterization. This document establishes a cost baseline for mixed waste characterization and treatment system monitoring requirements from which to evaluate alternatives. The cost baseline established as part of this work includes costs for a thermal treatment technology (i.e., a rotary kiln incinerator), a nonthermal treatment process (i.e., waste sorting, macronencapsulation, and catalytic wet oxidation), and no treatment (i.e., disposal of waste at the Waste Isolation Pilot Plant (WIPP)). The analysis of improvement over the baseline includes assessment of promising areas for technology development in front-end waste characterization, process equipment, off gas controls, and monitoring. Based on this assessment, an ideal characterization and monitoring configuration is described that minimizes costs and optimizes resources required for waste characterization.

1997-09-01T23:59:59.000Z

390

Steam Field | Open Energy Information  

Open Energy Info (EERE)

Field Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Sanyal Temperature Classification: Steam Field Dictionary.png Steam Field: No definition has been provided for this term. Add a Definition Sanyal Temp Classification This temperature scheme was developed by Sanyal in 2005 at the request of DOE and GEA, as reported in Classification of Geothermal Systems: A Possible Scheme. Extremely Low Temperature Very Low Temperature Low Temperature Moderate Temperature High Temperature Ultra High Temperature Steam Field Steam field reservoirs are special cases where the fluid is predominantly found in a gas phase between 230°C to 240°C. "This special class of resource needs to be recognized, its uniqueness being the remarkably consistent initial temperature and pressure

391

Field Sampling | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Field Sampling Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Field Sampling Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Field Techniques Exploration Sub Group: Field Sampling Parent Exploration Technique: Field Techniques Information Provided by Technique Lithology: Rock samples are used to define lithology. Field and lab analyses can be used to measure the chemical and isotopic constituents of rock samples. Stratigraphic/Structural: Can reveal relatively high permeability zones. Provides information about the time and environment which formed a particular geologic unit. Microscopic rock textures can be used to estimate the history of stress and strain, and/or faulting.

392

Materials Characterization Laboratory (Fact Sheet), NREL (National...  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Laboratory The Materials Characterization Laboratory at NREL's Energy Systems Integration Facility (ESIF) research focus is the physical and photoelectrochemical...

393

Characterization of Grain Size, Morphology, Transmittance, and ...  

Science Conference Proceedings (OSTI)

Feb 16, 2010 ... Characterization of Minerals, Metals and Materials: Characterization of Grain Size, Morphology, Transmittance, and Tomography Sponsored...

394

Chemical Characterization of Nanomaterial Formulations for ...  

Science Conference Proceedings (OSTI)

... The Nanotechnology Characterization Laboratory (NCL) is a ... National Institutes of Health (NIH). ... infrastructure and characterization services with the ...

2012-10-02T23:59:59.000Z

395

Mechanical Characterization of Cellular Ceramic Materials  

Science Conference Proceedings (OSTI)

In this work two different types of commercial ceramic filter materials are investigated. Characterization ... Characterization of Graphite from PAN Aerogels.

396

Materials Characterization Committee - Committee Home Page  

Science Conference Proceedings (OSTI)

The Materials Characterization Committee is part of the Extraction & Processing Division;. Our Mission: Focuses on the materials characterization aspect of...

397

Fracturing Fluid Characterization Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Documentation Page Documentation Page 1. Report No. DE - FC 21 - 92MC29077 2. 3. Recipient's Accession No. 5. Report Date August 31, 2000 4. Title and Subtitle Fracturing Fluid Characterization Facility 6. 7. Author(s) The University of Oklahoma 8. Performing Organization Rept. No. 10. Project/Task/Work Unit No. 9. Performing Organization Name and Address The University of Oklahoma Sarkeys Energy Center T301 100 E Boyd St Norman, OK 73019 11. Contract (C) or Grant (G) No. DOE:DE FC21 92 MC29077 13. Type of Report & Period Covered Final Report 09 30 92 - 03 31 00 12. Sponsoring Organization Name and Address US Dept of Energy - FETL 3610 Collins Ferry Road Morgantown, WV 26505 14. 15. Supplementary Notes Several technical papers were prepared and presented at various Society of Petroleum Engineers Conferences and US

398

Furnace Black Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

Furnace Black Furnace Black Characterization Sid Richardson Carbon Co Fort Worth, TX Dr. Michel Gerspacher 005F 2 Definitions Particle Aggregate = 20nm to 100nm "Diameter" = 200nm to 1,000nm "Length" = Set of Percolated Aggregates Particle (?) Aggregate Agglomerate Constituents Size = Tech/Scientific Challenge 005F 3 Furnace Process High Temperature Refractory Feedstock Oil Air Natural Gas Reaction Zone Quench 005F 4 Specific Surface Area 005F 5 Structure 3-D Morphology Key Characteristic Summary of Crystallographic Studies 005F 7 Methodologies 005F 8 Summary * For all furnace carbon black 12Å < L C < 17Å * Crystallite L a ≈ 25Å * Amorphous Carbon * No micropores * Very few surface groups (hetero atoms) { 005F 9 Effect of Heat Treatment on Amorphous Carbon

399

Photoelectronic characterization of heterointerfaces.  

DOE Green Energy (OSTI)

In many devices such as solar cells, light emitting diodes, transistors, etc., the performance relies on the electronic structure at interfaces between materials within the device. The objective of this work was to perform robust characterization of hybrid (organic/inorganic) interfaces by tailoring the interfacial region for photoelectron spectroscopy. Self-assembled monolayers (SAM) were utilized to induce dipoles of various magnitudes at the interface. Additionally, SAMs of molecules with varying dipolar characteristics were mixed into spatially organized structures to systematically vary the apparent work function. Polymer thin films were characterized by depositing films of varying thicknesses on numerous substrates with and without interfacial modifications. Hard X-ray photoelectron spectroscopy (HAXPES) was performed to evaluate a buried interface between indium tin oxide (ITO), treated under various conditions, and poly(3-hexylthiophene) (P3HT). Conducting polymer films were found to be sufficiently conducting such that no significant charge redistribution in the polymer films was observed. Consequently, a further departure from uniform substrates was taken whereby electrically disconnected regions of the substrate presented ideally insulating interfacial contacts. In order to accomplish this novel strategy, interdigitated electrodes were used as the substrate. Conducting fingers of one half of the electrodes were electrically grounded while the other set of electrodes were electronically floating. This allowed for the evaluation of substrate charging on photoelectron spectra (SCOPES) in the presence of overlying semiconducting thin films. Such an experiment has never before been reported. This concept was developed out of the previous experiments on interfacial modification and thin film depositions and presents new opportunities for understanding chemical and electronic changes in a multitude of materials and interfaces.

Brumbach, Michael Todd

2012-02-01T23:59:59.000Z

400

K Basins Field Verification Program  

SciTech Connect

The Field Verification Program establishes a uniform and systematic process to ensure that technical information depicted on selected engineering drawings accurately reflects the actual existing physical configuration. This document defines the Field Verification Program necessary to perform the field walkdown and inspection process that identifies the physical configuration of the systems required to support the mission objectives of K Basins. This program is intended to provide an accurate accounting of the actual field configuration by documenting the as-found information on a controlled drawing.

Booth, H.W.

1994-12-02T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Magnetic response to applied electrostatic field in external magnetic field  

E-Print Network (OSTI)

We show, within QED and other possible nonlinear theories, that a static charge localized in a finite domain of space becomes a magnetic dipole, if it is placed in an external (constant and homogeneous) magnetic field in the vacuum. The magnetic moment is quadratic in the charge, depends on its size and is parallel to the external field, provided the charge distribution is at least cylindrically symmetric. This magneto-electric effect is a nonlinear response of the magnetized vacuum to an applied electrostatic field. Referring to a simple example of a spherically-symmetric applied field, the nonlinearly induced current and its magnetic field are found explicitly throughout the space, the pattern of lines of force is depicted, both inside and outside the charge, which resembles that of a standard solenoid of classical magnetostatics.

T. C. Adorno; D. M. Gitman; A. E. Shabad

2013-11-16T23:59:59.000Z

402

Conservation laws. Generation of physical fields. Principles of field theories  

E-Print Network (OSTI)

In the paper the role of conservation laws in evolutionary processes, which proceed in material systems (in material media) and lead to generation of physical fields, is shown using skew-symmetric differential forms. In present paper the skew-symmetric differential forms on deforming (nondifferentiable) manifolds were used in addition to exterior forms, which have differentiable manifolds as a basis. Such skew-symmetric forms (which were named evolutionary ones since they possess evolutionary properties), as well as the closed exterior forms, describe the conservation laws. But in contrast to exterior forms, which describe conservation laws for physical fields, the evolutionary forms correspond to conservation laws for material systems. The evolutionary forms possess an unique peculiarity, namely, the closed exterior forms are obtained from these forms. It is just this that enables one to describe the process of generation of physical fields, to disclose connection between physical fields and material systems and to resolve many problems of existing field theories.

L. I. Petrova

2007-04-19T23:59:59.000Z

403

Xylooligosaccharides Production, Quantification, and Characterization...  

NLE Websites -- All DOE Office Websites (Extended Search)

Xylooligosaccharides Production, Quantification, and Characterization in Context of Lignocellulosic Biomass Pretreatment Qing Qing 1 , Hongjia Li 2,3,4, , Rajeev Kumar 2,4 and...

404

RMOTC - Field Information - Online Data  

NLE Websites -- All DOE Office Websites (Extended Search)

Online Data Rooms RMOTC's test site has become very well characterized over its 100-year history. Much of the information is non-proprietary and available to the public in the...

405

Fuel cell with metal screen flow-field  

DOE Patents (OSTI)

A polymer electrolyte membrane (PEM) fuel cell is provided with electrodes supplied with a reactant on each side of a catalyzed membrane assembly (CMA). The fuel cell includes a metal mesh defining a rectangular flow-field pattern having an inlet at a first corner and an outlet at a second corner located on a diagonal from the first corner, wherein all flow paths from the inlet to the outlet through the square flow field pattern are equivalent to uniformly distribute the reactant over the CMA. In a preferred form of metal mesh, a square weave screen forms the flow-field pattern. In a particular characterization of the present invention, a bipolar plate electrically connects adjacent fuel cells, where the bipolar plate includes a thin metal foil having an anode side and a cathode side; a first metal mesh on the anode side of the thin metal foil; and a second metal mesh on the cathode side of the thin metal foil. In another characterization of the present invention, a cooling plate assembly cools adjacent fuel cells, where the cooling plate assembly includes an anode electrode and a cathode electrode formed of thin conducting foils; and a metal mesh flow field there between for distributing cooling water flow over the electrodes to remove heat generated by the fuel cells. 11 figs.

Wilson, M.S.; Zawodzinski, C.

1998-08-25T23:59:59.000Z

406

DECORRELATION TIMES OF PHOTOSPHERIC FIELDS AND FLOWS  

SciTech Connect

We use autocorrelation to investigate evolution in flow fields inferred by applying Fourier local correlation tracking (FLCT) to a sequence of high-resolution (0.''3), high-cadence ({approx_equal} 2 minute) line-of-sight magnetograms of NOAA active region (AR) 10930 recorded by the narrowband filter imager of the Solar Optical Telescope aboard the Hinode satellite over 2006 December 12 and 13. To baseline the timescales of flow evolution, we also autocorrelated the magnetograms, at several spatial binnings, to characterize the lifetimes of active region magnetic structures versus spatial scale. Autocorrelation of flow maps can be used to optimize tracking parameters, to understand tracking algorithms' susceptibility to noise, and to estimate flow lifetimes. Tracking parameters varied include: time interval {Delta}t between magnetogram pairs tracked, spatial binning applied to the magnetograms, and windowing parameter {sigma} used in FLCT. Flow structures vary over a range of spatial and temporal scales (including unresolved scales), so tracked flows represent a local average of the flow over a particular range of space and time. We define flow lifetime to be the flow decorrelation time, {tau}. For {Delta}t > {tau}, tracking results represent the average velocity over one or more flow lifetimes. We analyze lifetimes of flow components, divergences, and curls as functions of magnetic field strength and spatial scale. We find a significant trend of increasing lifetimes of flow components, divergences, and curls with field strength, consistent with Lorentz forces partially governing flows in the active photosphere, as well as strong trends of increasing flow lifetime and decreasing magnitudes with increases in both spatial scale and {Delta}t.

Welsch, B. T. [Space Sciences Laboratory, University of California, Berkeley, CA 94720-7450 (United States); Kusano, K.; Yamamoto, T. T. [Solar Terrestrial Environment Laboratory, Nagoya University Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Muglach, K. [Code 674, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

2012-03-10T23:59:59.000Z

407

Innovative technologies for managing oil field waste.  

Science Conference Proceedings (OSTI)

Each year, the oil industry generates millions of barrels of wastes that need to be properly managed. For many years, most oil field wastes were disposed of at a significant cost. However, over the past decade, the industry has developed many processes and technologies to minimize the generation of wastes and to more safely and economically dispose of the waste that is generated. Many companies follow a three-tiered waste management approach. First, companies try to minimize waste generation when possible. Next, they try to find ways to reuse or recycle the wastes that are generated. Finally, the wastes that cannot be reused or recycled must be disposed of. Argonne National Laboratory (Argonne) has evaluated the feasibility of various oil field waste management technologies for the U.S. Department of Energy. This paper describes four of the technologies Argonne has reviewed. In the area of waste minimization, the industry has developed synthetic-based drilling muds (SBMs) that have the desired drilling properties of oil-based muds without the accompanying adverse environmental impacts. Use of SBMs avoids significant air pollution from work boats hauling offshore cuttings to shore for disposal and provides more efficient drilling than can be achieved with water-based muds. Downhole oil/water separators have been developed to separate produced water from oil at the bottom of wells. The produced water is directly injected to an underground formation without ever being lifted to the surface, thereby avoiding potential for groundwater or soil contamination. In the area of reuse/recycle, Argonne has worked with Southeastern Louisiana University and industry to develop a process to use treated drill cuttings to restore wetlands in coastal Louisiana. Finally, in an example of treatment and disposal, Argonne has conducted a series of four baseline studies to characterize the use of salt caverns for safe and economic disposal of oil field wastes.

Veil, J. A.; Environmental Assessment

2003-09-01T23:59:59.000Z

408

Fast superconducting magnetic field switch  

DOE Patents (OSTI)

The superconducting magnetic switch or fast kicker magnet is employed with electron stream or a bunch of electrons to rapidly change the direction of flow of the electron stream or bunch of electrons. The apparatus employs a beam tube which is coated with a film of superconducting material. The tube is cooled to a temperature below the superconducting transition temperature and is subjected to a constant magnetic field which is produced by an external dc magnet. The magnetic field produced by the dc magnet is less than the critical field for the superconducting material, thus, creating a Meissner Effect condition. A controllable fast electromagnet is used to provide a magnetic field which supplements that of the dc magnet so that when the fast magnet is energized the combined magnetic field is now greater that the critical field and the superconducting material returns to its normal state allowing the magnetic field to penetrate the tube. This produces an internal field which effects the direction of motion and of the electron stream or electron bunch. The switch can also operate as a switching mechanism for charged particles.

Goren, Yehuda (Mountain View, CA); Mahale, Narayan K. (The Woodlands, TX)

1996-01-01T23:59:59.000Z

409

Fast superconducting magnetic field switch  

DOE Patents (OSTI)

The superconducting magnetic switch or fast kicker magnet is employed with an electron stream or a bunch of electrons to rapidly change the direction of flow of the electron stream or bunch of electrons. The apparatus employs a beam tube which is coated with a film of superconducting material. The tube is cooled to a temperature below the superconducting transition temperature and is subjected to a constant magnetic field which is produced by an external dc magnet. The magnetic field produced by the dc magnet is less than the critical field for the superconducting material, thus, creating a Meissner Effect condition. A controllable fast electromagnet is used to provide a magnetic field which supplements that of the dc magnet so that when the fast magnet is energized the combined magnetic field is now greater than the critical field and the superconducting material returns to its normal state allowing the magnetic field to penetrate the tube. This produces an internal field which effects the direction of motion and of the electron stream or electron bunch. The switch can also operate as a switching mechanism for charged particles. Magnetic switches and particularly fast kicker magnets are used in the accelerator industry to quickly deflect particle beams into and out of various transport lines, storage rings, dumps, and specifically to differentially route individual bunches of particles from a train of bunches which are injected or ejected from a given ring.

Goren, Y.; Mahale, N.K.

1995-12-31T23:59:59.000Z

410

Field observations and lessons learned  

SciTech Connect

This presentation outlines observations and lessons learned from the Megaports program. It provides: (1) details of field and technical observations collected during LANL field activities at ports around the world and details of observations collected during radiation detections system testing at Los Alamos National Laboratory; (2) provides suggestions for improvement and efficiency; and (3) discusses possible program execution changes for more effective operations.

Nielsen, Joh B [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

411

Field Techniques | Open Energy Information  

Open Energy Info (EERE)

Field Techniques Field Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Field Techniques Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Field Techniques Exploration Sub Group: None Parent Exploration Technique: Exploration Techniques Information Provided by Technique Lithology: Map surface geology and hydrothermal alteration. Rock samples are used to define lithology. Field and lab analyses can be used to measure the chemical and isotopic constituents of rock samples. Bulk and trace element analysis of rocks, minerals, and sediments. Identify and document surface geology and mineralogy. Rapid and unambiguous identification of unknown minerals.[1] Stratigraphic/Structural: Locates active faults in the area of interest. Map fault and fracture patterns, kinematic information. Can reveal relatively high permeability zones. Provides information about the time and environment which formed a particular geologic unit. Microscopic rock textures can be used to estimate the history of stress and strain, and/or faulting.

412

PYROTRON WITH TRANSLATIONAL CLOSURE FIELDS  

DOE Patents (OSTI)

Circuit means is described for effecting inward transla- ' tory motion of the intensified terminal reflector field regions of a magnetic mirror plasma containment field with a simultaneous intensification of the over-all field configuration. The circuit includes a segmented magnetic field generating solenoid and sequentially actuated switch means to consecutively short-circuit the solenoid segments and place charged capacitor banks in shunt with the segments in an appropriate correlated sequence such that electrical energy is transferred inwardly between adjacent segments from the opposite ends of the solenoid. The resulting magnetic field is effective in both radially and axially adiabatically compressing a plasma in a reaction chamber disposed concentrically within the solenoid. In addition, one half of the circuit may be employed to unidirectionally accelerate plasma. (AEC)

Hartwig, E.C.; Cummings, D.B.; Post, R.F.

1962-01-01T23:59:59.000Z

413

Low-magnetic-field magnetars  

E-Print Network (OSTI)

It is now widely accepted that soft gamma repeaters and anomalous X-ray pulsars are the observational manifestations of magnetars, i.e. sources powered by their own magnetic energy. This view was supported by the fact that these `magnetar candidates' exhibited, without exception, a surface dipole magnetic field (as inferred from the spin-down rate) in excess of the electron critical field (~4.4E+13 G). The recent discovery of fully-qualified magnetars, SGR 0418+5729 and Swift J1822.3-1606, with dipole magnetic field well in the range of ordinary radio pulsars posed a challenge to the standard picture, showing that a very strong field is not necessary for the onset of magnetar activity (chiefly bursts and outbursts). Here we summarize the observational status of the low-magnetic-field magnetars and discuss their properties in the context of the mainstream magnetar model and its main alternatives.

Turolla, R

2013-01-01T23:59:59.000Z

414

Compact orthogonal NMR field sensor  

DOE Patents (OSTI)

A Compact Orthogonal Field Sensor for emitting two orthogonal electro-magnetic fields in a common space. More particularly, a replacement inductor for existing NMR (Nuclear Magnetic Resonance) sensors to allow for NMR imaging. The Compact Orthogonal Field Sensor has a conductive coil and a central conductor electrically connected in series. The central conductor is at least partially surrounded by the coil. The coil and central conductor are electrically or electro-magnetically connected to a device having a means for producing or inducing a current through the coil and central conductor. The Compact Orthogonal Field Sensor can be used in NMR imaging applications to determine the position and the associated NMR spectrum of a sample within the electro-magnetic field of the central conductor.

Gerald, II, Rex E. (Brookfield, IL); Rathke, Jerome W. (Homer Glen, IL)

2009-02-03T23:59:59.000Z

415

Tubulin assembly is disordered in a hypogeomagnetic field  

Science Conference Proceedings (OSTI)

Although the effect of a magnetic field on functions of many proteins has been reported, tubulin assembly in a hypogeomagnetic field (HGMF) has not yet been characterized. Here, we show disorder in tubulin self-assembly in an HGMF. Absorbance at 350 nm, commonly used to monitor tubulin self-assembly, was altered in the HGMF, providing evidence for the effects of HGMF on tubulin. Measurements of intrinsic fluorescence (335 nm) also revealed a disordered change in tubulin conformation during assembly in the HGMF. Under the same conditions, microtubule-like filaments were not observed by electron microscopy, with the exception of amorphous oligomers. Incubation of tubulin with tau in the natural geomagnetic field (GMF) yielded microtubule-like filaments, while only amorphous oligomers were observed following the incubation in the HGMF. This distinction suggests that tubulin assembly depends upon the GMF, and that elimination of the GMF induces disorder in tubulin organization.

Wang Dongliang [State Key Laboratory of Brain and Cognitive Sciences, Institute of Biophysics, Chinese Academy of Sciences, 15 Da Tun Road, Chaoyang District, Beijing 100101 (China); Graduate University of Chinese Academy of Sciences, 19A Yuquan Road, Shijingshan District, Beijing 100049 (China); Wang Xingsheng [State Key Laboratory of Brain and Cognitive Sciences, Institute of Biophysics, Chinese Academy of Sciences, 15 Da Tun Road, Chaoyang District, Beijing 100101 (China); Xiao Rong [State Key Laboratory of Brain and Cognitive Sciences, Institute of Biophysics, Chinese Academy of Sciences, 15 Da Tun Road, Chaoyang District, Beijing 100101 (China); Graduate University of Chinese Academy of Sciences, 19A Yuquan Road, Shijingshan District, Beijing 100049 (China); Liu Ying [State Key Laboratory of Brain and Cognitive Sciences, Institute of Biophysics, Chinese Academy of Sciences, 15 Da Tun Road, Chaoyang District, Beijing 100101 (China); He Rongqiao [State Key Laboratory of Brain and Cognitive Sciences, Institute of Biophysics, Chinese Academy of Sciences, 15 Da Tun Road, Chaoyang District, Beijing 100101 (China); Graduate University of Chinese Academy of Sciences, 19A Yuquan Road, Shijingshan District, Beijing 100049 (China)], E-mail: herq@sun5.ibp.ac.cn

2008-11-14T23:59:59.000Z

416

Abandoned oil fields in Kansas and Nebraska  

SciTech Connect

Data on approximately 400 abandoned oil fields in Kansas and 90 abandoned oil fields in Nebraska are presented. The following information is obtained on each field: county; DOE field code; field name; AAPG geologic province code; discovery date; year of last production; discovery well operator; proven acreage; formation thickness; depth of field; API gravity; calendar year; yearly field oil production; yearly field gas production; cumulative oil production; cumulative gas production; number abandoned fields in county; cumulative production of oil from fields; and cumulative production of gas from fields. (DMC)

Not Available

1982-12-01T23:59:59.000Z

417

Plant Phenotype Characterization System  

DOE Green Energy (OSTI)

This report is the final scientific report for the DOE Inventions and Innovations Project: Plant Phenotype Characterization System, DE-FG36-04GO14334. The period of performance was September 30, 2004 through July 15, 2005. The project objective is to demonstrate the viability of a new scientific instrument concept for the study of plant root systems. The root systems of plants are thought to be important in plant yield and thus important to DOE goals in renewable energy sources. The scientific study and understanding of plant root systems is hampered by the difficulty in observing root activity and the inadequacy of existing root study instrumentation options. We have demonstrated a high throughput, non-invasive, high resolution technique for visualizing plant root systems in-situ. Our approach is based upon low-energy x-ray radiography and the use of containers and substrates (artificial soil) which are virtually transparent to x-rays. The system allows us to germinate and grow plant specimens in our containers and substrates and to generate x-ray images of the developing root system over time. The same plant can be imaged at different times in its development. The system can be used for root studies in plant physiology, plant morphology, plant breeding, plant functional genomics and plant genotype screening.

Daniel W McDonald; Ronald B Michaels

2005-09-09T23:59:59.000Z

418

Remedial investigation sampling and analysis plan for J-Field, Aberdeen Proving Ground, Maryland. Volume 1: Field Sampling Plan  

SciTech Connect

The Environmental Management Division (EMD) of Aberdeen Proving Ground (APG), Maryland, is conducting a remedial investigation and feasibility study (RI/FS) of the J-Field area at APG pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended. J-Field is within the Edgewood Area of APG in Harford County, Maryland (Figure 1. 1). Since World War II activities in the Edgewood Area have included the development, manufacture, testing, and destruction of chemical agents and munitions. These materials were destroyed at J-Field by open burning and open detonation (OB/OD). Considerable archival information about J-Field exists as a result of efforts by APG staff to characterize the hazards associated with the site. Contamination of J-Field was first detected during an environmental survey of the Edgewood Area conducted in 1977 and 1978 by the US Army Toxic and Hazardous Materials Agency (USATHAMA) (predecessor to the US Army Environmental Center [AEC]). As part of a subsequent USATHAMA -environmental survey, 11 wells were installed and sampled at J-Field. Contamination at J-Field was also detected during a munitions disposal survey conducted by Princeton Aqua Science in 1983. The Princeton Aqua Science investigation involved the installation and sampling of nine wells and the collection and analysis of surficial and deep composite soil samples. In 1986, a Resource Conservation and Recovery Act (RCRA) permit (MD3-21-002-1355) requiring a basewide RCRA Facility Assessment (RFA) and a hydrogeologic assessment of J-Field was issued by the US Environmental Protection Agency (EPA). In 1987, the US Geological Survey (USGS) began a two-phased hydrogeologic assessment in data were collected to model, groundwater flow at J-Field. Soil gas investigations were conducted, several well clusters were installed, a groundwater flow model was developed, and groundwater and surface water monitoring programs were established that continue today.

Benioff, P.; Biang, R.; Dolak, D.; Dunn, C.; Martino, L.; Patton, T.; Wang, Y.; Yuen, C.

1995-03-01T23:59:59.000Z

419

Modeling Dwarfs for Workload Characterization  

Science Conference Proceedings (OSTI)

Workload characterization is an important concept in performance tuning and efficiency improvement of high performance computing systems. Not only does it allow a system to dynamically adjust resources, it also helps improve energy efficiency resulting ... Keywords: Berkeley's Dwarfs, MICA, Discrete-time Markov Chain, Workload Characterization

Kittituch Manakul, Peerapon Siripongwutikorn, Simon See, Tiranee Achalakul

2012-12-01T23:59:59.000Z

420

Characterization of national Web domains  

Science Conference Proceedings (OSTI)

During the last few years, several studies on the characterization of the public Web space of various national domains have been published. The pages of a country are an interesting set for studying the characteristics of the Web because at the same ... Keywords: Web characterization, Web measurement

Ricardo Baeza-Yates; Carlos Castillo; Efthimis N. Efthimiadis

2007-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "field characterization cxs" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2011 3, 2011 CX-006598: Categorical Exclusion Determination Site Characterization, Monitoring, and General Research Activities, Fiscal Year 2012-2013 CX(s) Applied: B3.1, B3.6, B3.8 Date: 08/23/2011 Location(s): Amarillo, Texas Office(s): NNSA-Headquarters, Pantex Site Office August 23, 2011 CX-006542: Categorical Exclusion Determination American Recovery and Reinvestment Act Energy Efficiency Conservation Block Grant - State of Louisiana Saint James Parish CX(s) Applied: B5.1 Date: 08/23/2011 Location(s): Saint James Parish, Louisiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 23, 2011 CX-006537: Categorical Exclusion Determination Electrically Supported Thermal Exchange (ELSTEX) Technology CX(s) Applied: A9, B3.6 Date: 08/23/2011

422

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2010 7, 2010 CX-004218: Categorical Exclusion Determination Recombinant Protein Expression, Purification, Characterization, and Immobilizations in Functionalized Materials CX(s) Applied: B3.12 Date: 06/07/2010 Location(s): New Mexico Office(s): Sandia Site Office June 7, 2010 CX-002685: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Program Music City Bikeway CX(s) Applied: B5.1 Date: 06/07/2010 Location(s): Nashville, Tennessee Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 7, 2010 CX-002683: Categorical Exclusion Determination Cincinnati City American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant Act 4 (Ohio River Trail - Corbin to Collins) CX(s) Applied: A9, A11, B5.1

423

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

20, 2010 20, 2010 CX-004268: Categorical Exclusion Determination Scale-Up of Hydrogen Transport Membranes CX(s) Applied: B3.6 Date: 10/20/2010 Location(s): Boulder, Colorado Office(s): Fossil Energy, National Energy Technology Laboratory October 19, 2010 CX-004274: Categorical Exclusion Determination Soil Amendment Product for Oilfield Brine Contaminated Soil ? Field Testing Part II CX(s) Applied: B3.7 Date: 10/19/2010 Location(s): Blackwell, Oklahoma Office(s): Fossil Energy, National Energy Technology Laboratory October 19, 2010 CX-004277: Categorical Exclusion Determination Characterization of the Triassic Newark Basin of New York and New Jersey for Geologic Storage of Carbon Dioxide CX(s) Applied: A9 Date: 10/19/2010 Location(s): Clarkstown, New York Office(s): Fossil Energy, National Energy Technology Laboratory

424

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2010 9, 2010 CX-004278: Categorical Exclusion Determination Characterization of the Triassic Newark Basin of New York and New Jersey for Geologic Storage of Carbon Dioxide CX(s) Applied: A9 Date: 10/19/2010 Location(s): Clarkstown, New York Office(s): Fossil Energy, National Energy Technology Laboratory October 19, 2010 CX-004275: Categorical Exclusion Determination Soil Amendment Product for Oilfield Brine Contaminated Soil ? Field Testing Part II CX(s) Applied: B3.7 Date: 10/19/2010 Location(s): Yale, Oklahoma Office(s): Fossil Energy, National Energy Technology Laboratory October 18, 2010 CX-004292: Categorical Exclusion Determination Small Scale Electrical Power Generation from Low-Temperature Geothermal Process Water Utilized in a Mining Operation CX(s) Applied: A9, B3.1, B3.6

425

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7842: Categorical Exclusion Determination 7842: Categorical Exclusion Determination Energy Efficient Windows and Doors for City Owned Buildings CX(s) Applied: B5.1 Date: 11/28/2011 Location(s): Pennsylvania Offices(s): Energy Efficiency and Renewable Energy November 28, 2011 CX-008005: Categorical Exclusion Determination Site Characterization and Environmental Monitoring CX(s) Applied: B3.1 Date: 11/28/2011 Location(s): Washington Offices(s): Science, Pacific Northwest Site Office November 28, 2011 CX-007509: Categorical Exclusion Determination Record of Categorical Exclusion for Use of RW Surge Line to Big Hill Anhydrite Pond for Raw Water Intake Structure Recycle CX(s) Applied: B1.3 Date: 11/28/2011 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office November 28, 2011 CX-008004: Categorical Exclusion Determination

426

Categorical Exclusion Determinations: California | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 4, 2013 April 4, 2013 CX-010350: Categorical Exclusion Determination Aerial Photography Activity Over the Proposed Richmond Bay Campus CX(s) Applied: B3.2 Date: 04/04/2013 Location(s): California Offices(s): Berkeley Site Office April 3, 2013 CX-010257: Categorical Exclusion Determination Characterizing Fracture Properties Using Resistivity measured at Different Frequencies CX(s) Applied: A9, B3.6 Date: 04/03/2013 Location(s): California Offices(s): Golden Field Office March 28, 2013 CX-010567: Categorical Exclusion Determination Lawrence Berkeley National Laboratory - Rapid Automated Modeling and Simulation of Existing Buildings for Energy Efficiency CX(s) Applied: B3.6 Date: 02/28/2013 Location(s): California, District of Columbia Offices(s): Advanced Research Projects Agency-Energy

427

Categorical Exclusion Determinations: Alaska | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 7, 2010 April 7, 2010 CX-001571: Categorical Exclusion Determination Validation of Innovative Techniques - Pilgrim Hot Springs, Alaska CX(s) Applied: B3.1, A9 Date: 04/07/2010 Location(s): Pilgrim Hot Springs, Alaska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 6, 2010 CX-001436: Categorical Exclusion Determination Source Characterization and Temporal Variation of Methane Seepage CX(s) Applied: B3.1, B3.8 Date: 04/06/2010 Location(s): Alaska Office(s): Fossil Energy, National Energy Technology Laboratory March 29, 2010 CX-006880: Categorical Exclusion Determination Alaska-Tribe-Native Village of Port Lions CX(s) Applied: A9, B3.6, B5.1 Date: 03/29/2010 Location(s): Native Village of Port Lions, Alaska Office(s): Energy Efficiency and Renewable Energy