National Library of Energy BETA

Sample records for femp designated products

  1. FEMP Designated Product: Lavatory Faucets

    Broader source: Energy.gov [DOE]

    FEMP suspended its product designation and purchasing specification for commercial faucets until further notice.

  2. Guide to FEMP-Designated Parking Lot Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TABLE OF CONTENTS 1 INTRODUCTION * FEMP-DESIGNATED PRODUCTS * ENERGY EFFICIENCY METRICS 3 DESIGN PROCESS * STEP-BY-STEP OVERVIEW 6 COMPONENTS OF THE DESIGN * DESIGN CONSIDERATIONS * LIGHTING DESIGN CONSIDERATIONS * LUMINAIRE DISTRIBUTION * COLOR QUALITIES * LIGHT SPECTRUM 13 PARKING LOT LIGHTING DESIGN * DESIGN SCENARIO OVERVIEW * DESIGN SCENARIO - GENERAL LUMINAIRE * DESIGN SCENARIO - FEMP-DESIGNATED LUMINAIRE 17 LIGHTING CONTROLS SAVE ENERGY * STATIC CONTROLS * MULTI-LEVEL CONTROLS 20

  3. Guide to FEMP-Designated Parking Structure Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Structure Lighting Guide to FEMP-Designated Parking Structure Lighting Document provides acquisition guidance and federal efficiency requirements across a variety of product cate-gories, including parking garage luminaires, which are a FEMP-designated product category. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Download the guide to FEMP-designated parking

  4. Guide to FEMP-Designated Parking Lot Lighting

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document provides acquisition guidance and federal efficiency requirements across a variety of product categories, including outdoor pole-arm-mounted area and roadway luminaires, which are a FEMP-designated product category. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  5. Guide to FEMP-Designated Parking Structure Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Renewable Energy Laboratory's parking structure utilizes many measures to achieve a parking structure that uses 90% less energy than the baseline energy code. TABLE OF CONTENTS 1 INTRODUCTION * FEMP-DESIGNATED PRODUCTS * ENERGY EFFICIENCY METRICS 3 DESIGN PROCESS * STEP-BY-STEP OVERVIEW 6 COMPONENTS OF THE DESIGN * BUILDING DESIGN CONSIDERATIONS * MATERIAL SELECTION * LIGHTING DESIGN CONSIDERATIONS * LUMINAIRE DISTRIBUTION * COLOR QUALITIES * LUMINAIRE LAYOUT 13 PARKING STRUCTURE

  6. FEMP Updates Product Energy-Efficiency Requirements

    Broader source: Energy.gov [DOE]

    FEMP updated energy-efficiency requirements for Federal procurement of commercial boilers, water-cooled ice machines, and industrial (high/low bay) luminaires, and established new efficiency requirements for suspended luminaires.

  7. FEMP Releases 10 Updated Covered Product Categories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 Updated Covered Product Categories FEMP Releases 10 Updated Covered Product Categories March 11, 2015 - 4:17pm Addthis Federal agencies are required by five legal authorities, the Energy Security and Independence Act of 2007, the Energy Policy Act of 2005, Federal Acquisition Regulations, Executive Order (E.O.) 13423, and E.O. 13221, to use energy-efficient products. By procuring and properly installing efficient products, agencies can meet their requirements, lower energy and water

  8. FEMP Releases Three Updated Covered Product Categories | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Three Updated Covered Product Categories FEMP Releases Three Updated Covered Product Categories September 28, 2015 - 4:51pm Addthis Federal agencies are required by five legal authorities, the Energy Security and Independence Act of 2007, the Energy Policy Act of 2005, Federal Acquisition Regulations, Executive Order (E.O.) 13693, and E.O. 13221, to use energy-efficient products. By procuring and properly installing efficient products, agencies can meet their requirements, lower

  9. Designating Efficiency Levels for Product Categories | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Products in these categories must meet efficiency levels set by FEMP or the U.S. ... To determine if a product category should be considered for a FEMP-designated efficiency ...

  10. Efficient Technologies and Products for Federal Facilities |...

    Broader source: Energy.gov (indexed) [DOE]

    Find products and technologies covered by a specific efficiency program. ENERGY STAR EPEAT FEMP Designated FEMP Low Standby Power FEMP Promising Technologies WaterSense Advanced ...

  11. Energy- and Water-Efficient Product Efficiency Programs | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Program (FEMP) and the U.S. Environmental Protection Agency (EPA) established four programs that specify products as energy- or water-efficient. ENERGY STAR FEMP Designated FEMP ...

  12. Covered Product Category: Data Center Storage | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    FEMP recommends that agencies incorporate efficiency requirements into both the technical ... finding that no ENERGY STAR-qualified or FEMP-designated product is available to meet ...

  13. FEMP Offers New Training on Energy Management Basics | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Federal Energy Management Program (FEMP) will present a live training course on June 24, ... FEMP training courses are designed for Federal energy and facility managers, but are open ...

  14. Covered Product Categories (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-02-01

    List of Federal Energy Management Program (FEMP)-designated product categories for energy-efficient procurement requirements.

  15. FEMP Exterior Solid-State Lighting Technology Pilot

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FUPWG Fall 2012 FEMP Exterior Solid-State Lighting Technology Pilot Jeff McCullough, LC October 17, 2012 Pacific Northwest National Laboratory Richland, Washington 2 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * State of SSL Technology - Introducing MOBLI * Federal Energy Management Program (FEMP) - Technology Deployment Matrix - Federal Exterior Market Size - FEMP Exterior SSL Initiative - FEMP-designated Efficiency Requirements - Plans for FY13 * Commercial Building Energy Alliance

  16. FEMP Focus - June 2001

    SciTech Connect (OSTI)

    2001-06-01

    FEMP Focus is FEMP's bimonthly newsletter that promotes energy awareness, recognizes successes, and communicates information about saving energy and dollars to the federal community.

  17. FEMP Offers Training on Federal On-Site Renewable Power Purchase...

    Broader source: Energy.gov (indexed) [DOE]

    the request for proposal process, key approvals, and FEMP support and assistance. ... FEMP eTraining core courses are designed for federal energy and facility managers but are ...

  18. Suggest a New Product Category | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    If you want to propose a new product category to be designated by the Federal Energy Management Program (FEMP), send the following information to FEMP. The product category you ...

  19. FEMP First Thursday Seminar Covers Executive Order 13693 Updates...

    Broader source: Energy.gov (indexed) [DOE]

    The U.S. Department of Energy Federal Energy Management Program (FEMP) will present a new ... FEMP First Thursday Seminars are designed for federal energy and facility managers but are ...

  20. FEMP Offers Training on Distributed-Scale Renewable Energy Projects...

    Broader source: Energy.gov (indexed) [DOE]

    (DOE) Federal Energy Management Program (FEMP) is a new e-Training core course: ... FEMP core courses are designed for Federal energy and facility managers, but are open to ...

  1. FEMP Focus - Winter 2009

    SciTech Connect (OSTI)

    2009-01-01

    FEMP newsletter covering energy efficiency and renewable energy strategies, tactics, and technologies to meet Federal energy management goals.

  2. ASHRAE Minimum Efficiency Requirements Tables for Heating and Cooling Product Categories

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) created tables that mirror American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1-2013 tables, which include minimum efficiency requirements for FEMP-designated and ENERGY STAR-qualified heating and cooling product categories. Download the tables below to incorporate FEMP and ENERGY STAR purchasing requirements into federal product acquisition documents.

  3. FEMP Receives Internationally Recognized Training Accreditation

    Office of Energy Efficiency and Renewable Energy (EERE)

    Following a rigorous application process, the International Association for Continuing Education and Training (IACET) has awarded the U.S. Department of Energy's Federal Energy Management Program (FEMP) the prestigious “Authorized Provider” designation for continuing education and training.

  4. FEMP Fiscal Year 1999 ESPC Business Strategy Development Summary Report

    SciTech Connect (OSTI)

    Mcmordie, Katherine; Hunt, W. D.

    2000-03-03

    This report summarizes the objectives, activities, products, and recommendations of the ESPC Business Strategy Development project. The objective of this project was to assist DOE FEMP in defining the potential Federal sector market for FEMP-offered alternative financing services with a focus on Super-Energy Savings Performance Contracts (Super-ESPCs).

  5. FEMP Focus: Spring 2009 Issue

    SciTech Connect (OSTI)

    2009-04-07

    FEMP newsletter covering energy efficiency and renewable energy strategies, tactics, and technologies to meet Federal energy management goals.

  6. FEMP Focus: Winter 2010 Issue

    SciTech Connect (OSTI)

    2010-01-13

    FEMP newsletter covering energy efficiency and renewable energy strategies, tactics, and technologies to meet Federal energy management goals.

  7. FEMP Focus: December 2010 Issue

    SciTech Connect (OSTI)

    2011-02-01

    FEMP newsletter covering energy efficiency and renewable energy strategies, tactics, and technologies to meet Federal energy management goals.

  8. FEMP Focus: Summer 2009 Issue

    SciTech Connect (OSTI)

    2009-07-31

    FEMP newsletter covering energy efficiency and renewable energy strategies, tactics, and technologies to meet Federal energy management goals.

  9. FEMP Focus: Spring 2010 Issue

    SciTech Connect (OSTI)

    2010-06-16

    FEMP newsletter covering energy efficiency and renewable energy strategies, tactics, and technologies to meet Federal energy management goals.

  10. FEMP Focus - Summer 2005

    SciTech Connect (OSTI)

    2005-09-15

    Features information about discrepancy between guaranteed Savings in ESPC Projects and Utility Bills, Super ESPC provides energy savings to FDA Office/Lab Complex, VA Medical Center Uses Super ESPC for Solar, Coast Guard Air Station Cape Cod Demonstrates Successful Fuel Cell, FEMP Conducts E-Learning Energy Training, and more for federal agencies.

  11. FEMP Offers New Advanced eTraining on UESCs

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) presents an eTraining Core Course: Executing Utility Energy Service Contracts: An Advanced Guide available on the Whole Building Design Guide (WBDG) website.

  12. Federal Energy Management Program (FEMP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SMALL BUSINESS PROGRAM The Federal Energy Management Program (FEMP) is a U.S. Department of Energy (DOE) program focused on reducing the federal government's energy consumption by providing federal agencies with information, tools, and assistance toward tracking and meeting energy- related requirements and goals. FEMP seeks contracts with small businesses to aid in this effort. This fact sheet outlines essential resources and tips to get you started in small business contracting with FEMP.

  13. FEMP Suggested ESPC Milestone Plan

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document provides the Federal Energy Management Program's (FEMP's) suggested energy savings performance contract (ESPC) milestones from task order development to award process.

  14. FEMP UESC Data Confidentiality Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reported data is never released to a third-party without consent and data is securely maintained through FEMP Central (password protected database operated by Project Performance ...

  15. Covered Product Category: Commercial Boilers

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for commercial boilers, which is a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  16. Covered Product Category: Exterior Lighting

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories.

  17. Energy Savings Performance Contracts: FEMP Assistance | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Management Program (FEMP) for energy savings performance contract (ESPC) projects. Download the Energy Savings Performance Contracts: FEMP Assistance fact sheet. (1.48 ...

  18. FEMP Releases AFFECT Funding Opportunity Announcement | Department...

    Broader source: Energy.gov (indexed) [DOE]

    November 5, 2013, the Federal Energy Management Program (FEMP) issued a Funding ... Addthis Related Articles FEMP 2015 Funding Opportunity Announcement Federal Energy ...

  19. Federal Energy Management Program (FEMP) Training Resources ...

    Open Energy Info (EERE)

    Management Program (FEMP) Training Resources Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Federal Energy Management Program (FEMP) Training Resources AgencyCompany...

  20. FEMP Launches New Training Search Tool

    Broader source: Energy.gov [DOE]

    FEMP recently launched the FEMP Training Search, a Web tool that lists free training opportunities to help agencies meet Federal energy, water, and sustainability laws and requirements.

  1. FEMP Year in Review 2009

    SciTech Connect (OSTI)

    2009-12-01

    In 2009, the Federal Energy Management Program (FEMP)undertook an ambitious reorganization of its program structure to be more responsive to the needs of its Federal agency customers. In this Year in Review 2009, you will learn more about FEMP achievements under its new program areas.

  2. Covered Product Category: Water-Cooled Electric Chillers

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including water-cooled electric chillers, which is a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  3. FEMP Renewable Energy Overview

    SciTech Connect (OSTI)

    Not Available

    2003-06-01

    This four-page overview describes how Federal agencies can contact the Department of Energy's Federal Energy Management Program (FEMP) to obtain assistance in acquiring renewable energy systems, renewable fuels, and renewable ("green") power for use in their facilities and vehicles. Renewable resources, technologies, and fuels are described, as well as Federal goals for using clean, sustainable renewable energy; the current goal is to supply 2.5% of the Federal Government's energy with renewable sources by 2005. Also included is a description of the resources and technologies themselves and associated benefits.

  4. FEMP Best Practices and Lessons Learned for Federal Agency ESPC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FEMP Best Practices and Lessons Learned for Federal Agency ESPC Projects Contents 1. ... Use FEMP Price Benchmarking data and consult FEMP's guidance on determining price ...

  5. Incorporate Minimum Efficiency Requirements for Heating and Cooling Products into Federal Acquisition Documents

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) organized information about FEMP-designated and ENERGY STAR-qualified heating, ventilating, and air conditioning (HVAC) and water heating products into tables that mirror American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1-2013 minimum efficiency requirement tables. Federal buyers can use these tables as a reference and to incorporate the proper purchasing requirements set by FEMP and ENERGY STAR into federal acquisition documents.

  6. FEMP Renewable Energy Program Overview

    SciTech Connect (OSTI)

    2010-07-14

    Fact sheet describing how the U.S. Department of Energy's (DOE) Federal Energy Management Program (FEMP) provides Federal agencies with information, guidance, and assistance in using renewable energy.

  7. Covered Product Category: Air-Cooled Electric Chillers

    Office of Energy Efficiency and Renewable Energy (EERE)

    FEMP provides acquisition guidance and Federal efficiency requirements for electric chillers, which are a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  8. Low Standby Power Products | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Low Standby Power Products The Federal Energy Management Program (FEMP) develops ... FEMP provides resources to help agencies find low standby power products and meet ...

  9. Product Codes for Tracking Energy-Efficient Product Purchases...

    Broader source: Energy.gov (indexed) [DOE]

    The Federal Energy Management Program (FEMP) has mapped United Nations Standard Products and Services Codes (UNSPSCs) and Environmental Attribute Codes (ENACs) to the FEMP ...

  10. Laboratories for the 21st Century: An Introduction to Low-Energy Design; Federal Energy Management Program (FEMP) Brochure

    SciTech Connect (OSTI)

    Prowler, D.

    2000-08-22

    With its extensive requirements for environmental systems, flexibility, and growth, energy-efficient laboratory design is a challenge. Unlike other building types, a laboratory has HVAC and energy considerations that cannot be deferred; they must play a key, formative role if the building is to succeed. This publication should help to sensitize building professionals and their clients to the complex array of issues associated with efficient laboratory design and performance. This is only an introduction and you will need to consult other resources for in-depth information about energy-efficient laboratory design.

  11. FEMP Peer Review | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Report summarizes the findings of the Federal Energy Management Program (FEMP) Peer Review Panel conducted over a three-day period in September 2005. Download the FEMP Peer Review ...

  12. FEMP Focus: 2011 Volume 20 Issue 2

    SciTech Connect (OSTI)

    2011-09-01

    FEMP newsletter covering energy efficiency and renewable energy strategies, tactics, and technologies to meet Federal energy management goals.

  13. FEMP Director's Blog | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FEMP Director's Blog FEMP Director's Blog RSS Federal Energy Management Program Director Timothy Unruh shares his thoughts on topics related to energy management. November 30, 2015 FEMP Director's Blog Making a Difference: Federal Energy Management Down on the Farm Support from the Federal Energy Management Program (FEMP) has helped the USDA develop shelters for agricultural equipment that are also generate solar power. The "Solar Shaded AgPort" is a model of interagency cooperation

  14. FEMP Announces New Utilities Offering UESCs

    Broader source: Energy.gov [DOE]

    FEMP is pleased to announce four new utilities now offering Utility Energy Service Contracts (UESCs) to their Federal customers.

  15. FEMP Federal Fleet Files - May 2009 Issue

    SciTech Connect (OSTI)

    2009-06-04

    May 2009 issue of the monthly FEMP newsletter highlighting the latest news and developments impacting Federal fleets.

  16. FEMP Video Success Story: GSA New Carrollton Federal Building

    Broader source: Energy.gov [DOE]

    This video success story covers deep energy retrofits achieved through an $45M Energy Savings Performance Contract, designed to reduce energy consumption by 60%. Technologies include a geothermal well field, optimized HVAC systems, lighting upgrades and controls, intelligent building automation systems, and photovoltaics. For more information, watch the FEMP First Thursday Seminar, Federal Thought Leaders Roundtable.

  17. FEMP Best Practices and Lessons Learned for Federal Agency ESPC Projects: Measurement and Verification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1. MEASUREMENT & VERIFICATION 11.1 Agencies should designate a primary contact who is responsible for (1) maintaining contact with FEMP through the Life of Contract program, and (2) maintaining continuity of documentation and awareness of the ESPC throughout the performance period. 11.2 Agencies should designate a government witness to accompany the ESCO during annual measurement and verification activities. Ensure that the government witness has reviewed current FEMP guidance on M&V

  18. Covered Product Category: Imaging Equipment | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    ... REDUCING ENERGY COSTS: SAVE MORE THAN 20 WHEN YOU BUY ENERGY STAR QUALIFIED PRODUCTS FEMP ... FEMP recommends that agencies incorporate efficiency requirements into both the technical ...

  19. FEMP ESPC Project Development Resource Guide

    Broader source: Energy.gov (indexed) [DOE]

    project timeline. FEMP Services Options* Project Facilitation Renewable Energy Assessment Energy Sales Agreement Support Detailed Pricing Analysis Interest Rate Analysis Other SME...

  20. FEMP Launches New Technical Assistance Request Portal

    Broader source: Energy.gov [DOE]

    FEMP recently launched a new technical assistance request portal, which allows Federal agencies to submit and track requests for assistance for renewable energy projects.

  1. FEMP Focus: 2011 Volume 20 Issue 1

    SciTech Connect (OSTI)

    2011-04-05

    Department of Energy (DOE); Federal Energy Management Program; FEMP Focus Newsletter; December 2010; Alternative Financing, Guidance Documents, Recovery Act Technical Assistance, Training, Energy Awareness

  2. The FEMP Awards Program: Fostering Institutional Change and Energy...

    Office of Environmental Management (EM)

    The FEMP Awards Program: Fostering Institutional Change and Energy Management Excellence The FEMP Awards ... More Documents & Publications Communities of Practice: A Tool for ...

  3. US DOE Federal Energy Management Program (FEMP) | Open Energy...

    Open Energy Info (EERE)

    US DOE Federal Energy Management Program (FEMP) (Redirected from Federal Energy Management Program) Jump to: navigation, search Logo: Federal Energy Management Program (FEMP) Name...

  4. US DOE Federal Energy Management Program (FEMP) | Open Energy...

    Open Energy Info (EERE)

    US DOE Federal Energy Management Program (FEMP) (Redirected from Federal Energy Management Program (FEMP)) Jump to: navigation, search Logo: Federal Energy Management Program...

  5. FEMP Completes 2000th Renewable Energy Optimization Screening...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FEMP Completes 2000th Renewable Energy Optimization Screening FEMP Completes 2000th Renewable Energy Optimization Screening July 23, 2015 - 12:03pm Addthis REopt models the complex ...

  6. FEMP Best Practices and Lessons Learned for Federal Agency ESPC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Use FEMP Price Benchmarking data and consult FEMP's guidance on determining price ... promotion of competition (low price or best value), and small business requirements. ...

  7. FEMP Offers Updated Training on the Guiding Principles for High...

    Broader source: Energy.gov (indexed) [DOE]

    Energy's Federal Energy Management Program (FEMP) presents an updated series of training ... and facility managers but are open to all individuals though the FEMP Training Search. ...

  8. FEMP Offers New Training Series on Renewable Energy Technologies...

    Broader source: Energy.gov (indexed) [DOE]

    analysis of renewable energy projects for FEMP and other non-governmental clients. ... and facility managers, but are open to all individuals though the FEMP Training Search. ...

  9. FEMP Offers Training on Energy Efficiency Expert Evaluations...

    Broader source: Energy.gov (indexed) [DOE]

    The U.S. Department of Energy Federal Energy Management Program (FEMP) is presenting ... energy and facility managers but are open to all individuals through the FEMP Training. ...

  10. FEMP 2015 Funding Opportunity Announcement | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    On March 6, 2015, the Federal Energy Management Program (FEMP) issued a funding ... Updated information will be posted on the FEMP website as it becomes available. To learn ...

  11. FEMP ESPC Project Development Resource Guide | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Guide charts the Federal Energy Management Program (FEMP) process for providing project ... indefinite-quantity ESPC. Download the FEMP ESPC Project Development Resource Guide. ...

  12. FEMP Services Interagency Agreement for DOE ESPC Support | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Management Program (FEMP) template agreement that authorizes a requesting agency to provide funds to the U.S. Department of Energy for obtaining FEMP services to support a ...

  13. Microsoft Word - FEMP-State MOU pdf version.doc

    Broader source: Energy.gov (indexed) [DOE]

    (DOE) Federal Energy Management Program (FEMP) agree to parameters intended to result in ... OBO has asked FEMP for assistance in developing and managing this crucial effort. III. ...

  14. FEMP First Thursday Update: FY2015 Government Performance Toward...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FEMP First Thursday Update: FY2015 Government Performance Toward Energy and Sustainability Goals FEMP First Thursday Update: FY2015 Government Performance Toward Energy and ...

  15. FEMP First Thursday Update Provides Details about the 2016 Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FEMP First Thursday Update Provides Details about the 2016 Energy Exchange Training and Trade Show FEMP First Thursday Update Provides Details about the 2016 Energy Exchange ...

  16. FEMP First Thursday Update Covers Fiscal Year 2015 Government...

    Broader source: Energy.gov (indexed) [DOE]

    The U.S. Department of Energy's (DOE) Federal Energy Management Program (FEMP) will ... providing analytical support to DOE FEMP. After completing a course evaluation, ...

  17. FEMP Releases ESPC Request for Information Results | Department...

    Broader source: Energy.gov (indexed) [DOE]

    technologies Potential improvements to the FEMP streamlined ENABLE program for smaller ... The responses will inform and influence FEMP ESPC program, policy, and contracts now and ...

  18. FEMP First Thursday Update Covers Strategies for Renewable Energy...

    Broader source: Energy.gov (indexed) [DOE]

    The U.S. Department of Energy's (DOE) Federal Energy Management Program (FEMP) will ... as an expert service available from FEMP. Webinar instructors will discuss how ...

  19. Minimum Efficiency Requirements Tables for Heating and Cooling Product

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categories | Department of Energy Minimum Efficiency Requirements Tables for Heating and Cooling Product Categories Minimum Efficiency Requirements Tables for Heating and Cooling Product Categories The Federal Energy Management Program (FEMP) created tables that mirror American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1-2013 tables, which include minimum efficiency requirements for FEMP-designated and ENERGY STAR-qualified heating and cooling product

  20. FEMP Focus - Summer 2004

    SciTech Connect (OSTI)

    2004-03-01

    Features information about renewable energy and sustainable design, State and Utility Partnership gets geothermal off the ground, federal agencies are designing new buildings to LEED, federal agencies partner with Native Americans to develop renewable energy, and more for federal agencies.

  1. FEMP Focus - Fall 2003

    SciTech Connect (OSTI)

    2003-10-01

    Features information about technical assistance, energy security, laboratory efficiency, wood waste, coping with drought, energy-efficient purchasing, federal green power purchasing, Labs21 Case Studies, sustainable design, and more for federal agencies.

  2. 2001 FEMP Customer Survey Appendices

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appendices A Report Prepared for the US Department of Energy February 2002 By TecMRKT Works and Sandia National Laboratories TecMRKT Works Nicholas P. Hall John H. Reed Ph.D Thomas P. Talerico Jeff Riggert Andrew Oh And Sandia National Laboratories Gretchen Jordan FEMP Customer Survey Appendices Table of Contents Table of Contents TABLE OF CONTENTS I LIST OF FIGURES II LIST OF TABLES III APPENDIX A: SURVEY INSTRUMENT 1 APPENDIX B: DETAILED REPONSES 42 1. Participant and Nonparticipant Profiles

  3. Covered Product Category: Exterior Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exterior Lighting Covered Product Category: Exterior Lighting The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories. Federal laws and requirements mandate that

  4. Covered Product Category: Water-Cooled Electric Chillers | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Category: Water-Cooled Electric Chillers Covered Product Category: Water-Cooled Electric Chillers The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for water-cooled electric chillers, which is a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Meeting Energy Efficiency

  5. FEMP Launches New Training Certificate Series | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certificate Series FEMP Launches New Training Certificate Series September 24, 2015 - 4:00pm Addthis FEMP Launches New Training Certificate Series The U.S. Department of Energy's Federal Energy Management Program (FEMP) recently launched nine new FEMP certificate training series. Developed in association with FEMP's technical leads, each training certificate series provides a pathway for energy management professionals to enhance their careers through relevant, skills-based online training. Each

  6. Radon measurements at the FEMP

    SciTech Connect (OSTI)

    Tomczak, L.M.; Daniels, R.D.; Dennis, C.; Glassey, H.G.; Lohner, W.G.; Ray, E.C.; Selasky, J.A.; Spitz, H.B.; Roush, K.

    1993-08-01

    Environmental radon monitoring activities at the DOE Fernald Environmental Management Project (FEMP) have been conducted extensively since the early 1980`s. Monitoring has been conducted at ambient concentration levels (< 1 pCi/L Rn-222), inside buildings, and at significantly elevated levels (hundreds of thousands pCi/L Rn-222) within the K-65 silo that store concentrated radium bearing wastes. The purpose of this paper/presentation is to present and discuss some of the difficulties encountered/solutions (e.g. reliability, detection limits, affects of environmental factors, data transfer, etc.) that have been discovered while taking measurements using both alpha track-etch passive integrating detectors and alpha scintillation real-time detectors. A short summary and conclusion section is provided following each topic presented.

  7. EERE Success Story-FEMP Helps Federal Facilities Develop Large...

    Broader source: Energy.gov (indexed) [DOE]

    The Federal Energy Management Program (FEMP) works with key individuals to accomplish ... Addthis Related Articles EERE Success Story-FEMP and U.S. Army Corps of Engineers Partner ...

  8. FEMP First Thursday Seminar Covers Data Center Efficiency Best...

    Broader source: Energy.gov (indexed) [DOE]

    The U.S. Department of Energy's Federal Energy Management Program (FEMP) will present Data ... and facility managers but are open to all individuals through the FEMP Training Search. ...

  9. FEMP Presents Latest Training Course on Advanced Energy Savings...

    Broader source: Energy.gov (indexed) [DOE]

    In this course, FEMP Technical Lead Kurmit Rockwell offers in-depth instruction on energy ... This 15-module course is free to take and is available on-demand through the FEMP Training ...

  10. FEMP Releases New Water Management Course and Series | Department...

    Office of Environmental Management (EM)

    Water Management Course and Series FEMP Releases New Water Management Course and Series October 12, 2015 - 2:27pm Addthis FEMP Releases New Water Management Course and Series The ...

  11. The FEMP Awards Program: Fostering Institutional Change and Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management Excellence | Department of Energy The FEMP Awards Program: Fostering Institutional Change and Energy Management Excellence The FEMP Awards Program: Fostering Institutional Change and Energy Management Excellence Report provides an assessment of the Federal Energy Management Program's (FEMP) Energy and Water Management Awards program to identify the institutional elements of award-winning projects and analyze the relative emphasis placed on them. Download the FEMP Awards Program:

  12. Video: FEMP eTraining New Certificate Series | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    describes the FEMP Certificate Series and lists the benefits of taking courses available from the various series topic areas

  13. 2001 FEMP Customer Survey Report (Appendices) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appendices) 2001 FEMP Customer Survey Report (Appendices) Appendix A: Survey Instrument Appendix B: Detailed Responses Appendix C: Adoption and Diffusion of Innovations Appendices (561.75 KB) More Documents & Publications 2001 FEMP Customer Survey Report (Summary Report) 2001 FEMP Customer Survey Report (Main Report

  14. 2001 FEMP Customer Survey Report (Main Report) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Main Report) 2001 FEMP Customer Survey Report (Main Report) This summary presents the key findings and recommendations from the 2001 FEMP customer survey. The key findings presented in this summary are a condensed presentation of the more detailed findings presented in each of the chapters. Study Report (2.32 MB) More Documents & Publications 2001 FEMP Customer Survey Report (Summary

  15. FEMP Video Success Story: Charles McC. Mathias Laboratory, SERC

    Broader source: Energy.gov [DOE]

    This video success story covers integrated design and operation of sustainable energy, water, and material systems. Technologies and systems include constructed wetlands, rainwater capture and reuse, natural wastewater treatment facilities, passive solar design strategies, daylighting, energy recovery systems, and more. For more information, watch the FEMP First Thursday Seminar, Federal Thought Leaders Roundtable.

  16. Product Categories Covered by Efficiency Programs

    Broader source: Energy.gov [DOE]

    Document shows a list of energy- and water-efficient product categories covered by various efficiency programs, including ENERGY STAR, Federal Energy Management Program (FEMP), Electronic Product Environmental Assessment Tool (EPEAT), FEMP Low Standby Power, and WaterSense.

  17. Production Target Design Report

    SciTech Connect (OSTI)

    Woloshun, Keith Albert; Dale, Gregory E.; Olivas, Eric Richard

    2015-07-28

    The Northstar 99Mo production target, a cylindrical length of 100Mo rod, has evolved considerably since its first conception.  The cylinder was very early sliced into disks to increase the heat transfer area, first to 1 mm thick disks then to the current 0.5 mm thick.  The coolant was changed early in the target development from water to helium to eliminate corrosion and dissolution.  The diameter has increased from initially 6 mm to 12 mm, the current diameter of the test target now at ANL, to nominally 28 mm (26-30.6 mm, depending upon optimal beam spot size and shape).  The length has also changed to improve the production to cost ratio, so now the target is nominally 41 mm long (excluding coolant gaps between disks), and irradiated on both ends.  This report summarizes the current status of the plant target design.

  18. Microsoft Word - FEMP-State MOU pdf version.doc | Department...

    Broader source: Energy.gov (indexed) [DOE]

    FEMP-State MOU pdf version.doc (15.06 KB) More Documents & Publications FEMP Peer Review 2001 FEMP Customer Survey Report (Appendices) Federal Utility Partnership Working Group ...

  19. 2008 Federal Energy Management Program (FEMP) Market Report

    SciTech Connect (OSTI)

    Tremper, C.

    2009-07-01

    This report assesses the market for Federal Energy Management Program (FEMP) services as it existed in FY 2008. It discusses Federal energy management goal progress in FY 2008, and examines the environment in which agencies implemented energy management projects over the last three years. The report also discusses some recent events that will increase the market for FEMP services, and outlines FEMP's major strategies to address these changes in FY 2009 and beyond.

  20. 2001 FEMP Customer Survey Report (Summary Report) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary Report) 2001 FEMP Customer Survey Report (Summary Report) The study was targeted to collect information from the average FEMP customer. As a result, the respondents in this survey represent 27 different federal agencies and a group of private contractors who have contracts with one or more federal agencies Summary Report (523.75 KB) More Documents & Publications 2001 FEMP Customer Survey Report (Main

  1. SUSTAINABILITY NEWS FEMP Announces 2015 Energy and Water Award Winners

    Energy Savers [EERE]

    FEMP Announces 2015 Energy and Water Award Winners The Federal Energy Management Program (FEMP) recently announced the winners of the 2015 Federal Energy and Water Management Awards. The annual awards program, co-sponsored by FEMP and the Federal Interagency Energy Policy Committee, recognizes individuals and organizations for contributions to energy and water efficiency within the federal government. The awardees displayed outstanding contributions in the areas of energy efficiency, water

  2. 2001 FEMP Customer Survey Study Report: April 2002

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study Report A Report Prepared for the US Department of Energy April 2002 By TecMRKT Works and Sandia National Laboratories TecMRKT Works Nicholas P. Hall Thomas P. Talerico John H. Reed Ph.D Jeff Riggert Andrew Oh And Sandia National Laboratories Gretchen Jordan 2001 FEMP Customer Survey Acknowledgements Acknowledgements This project was conducted for the United States Department of Energy (DOE) Federal Energy Management Program (FEMP). We would like to thank the following FEMP management and

  3. 2001 FEMP Customer Survey Summary Report: April 2002

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary Report A Report Prepared for the US Department of Energy April 2002 By TecMRKT Works and Sandia National Laboratories TecMRKT Works Nicholas P. Hall Thomas P. Talerico John H. Reed Ph.D Jeff Riggert Andrew Oh And Sandia National Laboratories Gretchen Jordan FEMP Customer Survey Summary Report Acknowledgements Acknowledgements This project was conducted for the United States Department of Energy (DOE), Federal Energy Management Program (FEMP). We would like to thank the following FEMP

  4. FEMP Outdoor Solid-State Lighting Intiative: Resources for Outdoor...

    Office of Environmental Management (EM)

    Outdoor Solid-State Lighting Intiative: Resources for Outdoor SSL Applications FEMP Outdoor Solid-State Lighting Intiative: Resources for Outdoor SSL Applications Fact sheet ...

  5. FEMP Offers New Training on Photovoltaic Operations and Maintenance...

    Energy Savers [EERE]

    Training on Photovoltaic Operations and Maintenance Best Practices FEMP Offers New Training on Photovoltaic Operations and Maintenance Best Practices November 4, 2014 - 2:40pm ...

  6. FEMP Technical Assistance to U.S. NORTHCOM (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-01-01

    Fact sheet overview of FEMP technical assistance services provided to the U.S. NORTHCOM as part of the American Recovery and Reinvestment Act.

  7. Federal Fleet Files, FEMP, Vol. 2, No. 8 - June 2010

    SciTech Connect (OSTI)

    2010-06-10

    June 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  8. Federal Fleet Files, FEMP, Vol. 2, No. 12 - November 2010

    SciTech Connect (OSTI)

    2010-11-12

    November 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  9. FEMP Seeking Public Comment on Draft M&V Guidelines

    Broader source: Energy.gov [DOE]

    FEMP is continuing its request for public comments on the Draft M&V Guidelines: Measurement and Verification for Performance-Based Contracts (Version 4.0).

  10. Technology Innovators are Invited: FEMP JUMP Call for innovation

    Broader source: Energy.gov [DOE]

    Learn about JUMP, an online community seeking your input for technology innovation. The FEMP JUMP Call for innovation is intended to identify near commercialization or newly commercialized...

  11. Federal Fleet Files, FEMP, Vol. 2, No. 23- December 2009

    SciTech Connect (OSTI)

    2009-12-08

    December 2009 update of monthly news from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  12. Federal Fleet Files, FEMP, Vol. 2, No. 5 - March 2010

    SciTech Connect (OSTI)

    2010-03-02

    March 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  13. FEMP First Thursday Update Covers Updates to 2016 Federal Energy...

    Energy Savers [EERE]

    Updates to 2016 Federal Energy and Water Management Awards Criteria FEMP First Thursday Update Covers Updates to 2016 Federal Energy and Water Management Awards Criteria January 7, 2016 ...

  14. Federal Fleet Files, FEMP, Vol. 1, No. 3 - July 2009

    SciTech Connect (OSTI)

    2009-07-24

    July 2009 issue of the monthly newsletter for the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  15. Federal Fleet Files, FEMP, Vol. 2, No. 9 - July 2010

    SciTech Connect (OSTI)

    2010-07-06

    July 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  16. FEMP Expands ESPC ENABLE Program to Include More Energy Conservation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Expands ESPC ENABLE Program to Include More Energy Conservation Measures FEMP Expands ESPC ENABLE Program to Include More Energy Conservation Measures November 13, 2013 - 12:00am...

  17. Federal Fleet Files, FEMP, Vol. 2, No. 4 - January 2010

    SciTech Connect (OSTI)

    2010-01-05

    January 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  18. Federal Fleet Files, FEMP, Vol. 2, No. 11 - October 2010

    SciTech Connect (OSTI)

    2010-10-19

    October 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  19. Federal Fleet Files, FEMP, Vol. 2, No. 10 - September 2010

    SciTech Connect (OSTI)

    2010-09-07

    September 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  20. FEMP Completes 2000th Renewable Energy Optimization Screening

    Broader source: Energy.gov [DOE]

    NREL's Renewable Energy Optimization (REopt) tool, developed through FEMP funding, is a screening tool that identifies and prioritizes cost-effective renewable energy opportunities at a single site...

  1. EERE Success Story-FEMP Completes 2000th Renewable Energy Optimization...

    Broader source: Energy.gov (indexed) [DOE]

    NREL's Renewable Energy Optimization (REopt) tool, developed through FEMP funding, is a ... The Federal Energy Management Program (FEMP) works with key individuals to accomplish ...

  2. FEMP Offers Training on the Five Phases to Success for ESPCs...

    Broader source: Energy.gov (indexed) [DOE]

    (DOE) Federal Energy Management Program (FEMP) presents its latest e-Training core course, ... and facility managers, but are open to all individuals though the FEMP Training website. ...

  3. EERE Success Story-FEMP and U.S. Army Corps of Engineers Partner...

    Broader source: Energy.gov (indexed) [DOE]

    Federal Energy Management Program (FEMP) developed a Memorandum of Understanding ... Related Articles U.S. Army Corps of Engineers and FEMP Partner to Drive Down Federal ...

  4. EERE Success Story-FEMP Assists White House in Setting GHG Reduction...

    Broader source: Energy.gov (indexed) [DOE]

    Earlier this year, EERE's Federal Energy Management Program (FEMP) provided key data and ... As the scorekeeper for federal agency energy performance data, FEMP is uniquely positioned ...

  5. U.S. Army Corps of Engineers and FEMP Partner to Drive Down Federal...

    Broader source: Energy.gov (indexed) [DOE]

    Federal Energy Management Program (FEMP) developed a partnership to help drive ... FEMP has had programmatic responsibility for execution of the larger federal program, and ...

  6. Malczewski Product Design LLC | Open Energy Information

    Open Energy Info (EERE)

    Malczewski Product Design LLC Jump to: navigation, search Name: Malczewski Product Design LLC Place: Neenah, Wisconsin Zip: 54956 Sector: Wind energy Product: Product development...

  7. MCFC product design improvement

    SciTech Connect (OSTI)

    Unknown

    1999-05-01

    This contract is supported by DOE and DOD/DARPA funds. The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOE's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (A) To provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed; and (B) To construct a full-size MW-class dual fuel power plant simulator. These objectives are planned to be achieved in the program coordinated with the Department of Energy, which has been funding a multiyear natural gas fueled direct fuel cell power plant program for civilian applications. Because many DARPA and DOE objectives are similar, the coordinated program activities are considered the most cost-effective for accomplishment of the program objectives. The DARPA/DOE joint program was launched in 1994. The DOE part of the program is expected to continue to the year 2000. The final output of this DOE program is to construct and operate a 2 MW power plant on an East Coast site. The site will be accessible to DOD energy/environmental systems base planners and logistics personnel as well as mission and policy planners to refine deployment configurations of this new power generation system for fixed base applications. A dual fuel fixed base design for military fuels operation, as well as support system logistics will be the key deliverables for the DARPA part of the program.

  8. MCFC PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    Unknown

    2000-04-30

    The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOD's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (1) To provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed. (2) To construct a full-size MW-class dual fuel power plant simulator. These objectives are planned to be achieved in the program coordinated with the Department of Energy, which has been funding a multiyear natural gas fueled direct fuel cell power plant program (DE-FC21-95MC31184) for civilian applications. Because many DARPA and DOE objectives are similar, the coordinated program activities are considered the most cost-effective for accomplishment of the program objectives. The DARPA/DOE joint program was launched in 1994. The DOE part of the program is expected to continue to Year 2000. The final output of this DOE program is to construct and operate a 2 MW power plant on an East Coast site. The site will be accessible to DOD energy/environmental systems base planners and logistics personnel as well as mission and policy planners to refine deployment configurations of this new power generation system for fixed base applications.

  9. Covered Product Category: Residential Dishwashers

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including residential dishwashers, which are an ENERGY STAR®-qualified product category.

  10. Production Facility SCADA Design Report

    SciTech Connect (OSTI)

    Dale, Gregory E.; Holloway, Michael Andrew; Baily, Scott A.; Woloshun, Keith Albert; Wheat, Robert Mitchell Jr.

    2015-03-23

    The following report covers FY 14 activities to develop supervisory control and data acquisition (SCADA) system for the Northstar Moly99 production facility. The goal of this effort is to provide Northstar with a baseline system design.

  11. FEMP First Thursday Seminar Covers Data Center Efficiency Best Practices |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Data Center Efficiency Best Practices FEMP First Thursday Seminar Covers Data Center Efficiency Best Practices March 2, 2016 - 12:26pm Addthis FEMP First Thursday Seminar Covers Data Center Efficiency Best Practices The U.S. Department of Energy's Federal Energy Management Program (FEMP) will present Data Center Energy Efficiency Best Practices, a new First Thursday Seminar, on April 7, 2016, from 1:30 p.m. to 3 p.m. Executive Order (E.O.) 13693 establishes aggressive

  12. FEMP First Thursday Seminar Covers Executive Order 13693 Updates |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Executive Order 13693 Updates FEMP First Thursday Seminar Covers Executive Order 13693 Updates November 6, 2015 - 5:14pm Addthis FEMP First Thursday Seminar Covers Executive Order 13693 Updates The U.S. Department of Energy Federal Energy Management Program (FEMP) will present a new First Thursday Seminar on December 3, 2015, from 1:30 p.m. to 3 p.m. Executive Order 13693: Recent Developments, Implementation Updates, and Opportunities. This seminar will provide learners

  13. FEMP: Labs, Data Centers, and High Tech Facilities

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses energy efficiency opportunities in data centers and laboratories as part of the Federal Energy Management Program's (FEMP's) High-Tech Facilities initiative.

  14. 2001 FEMP customer survey study report: April 2002

    SciTech Connect (OSTI)

    Hall, Nicholas P.; Talerico, Thomas P.; Reed, John H.; Riggert, Jeff; Oh, Andrew; Jordan, Gretchen

    2002-04-01

    This summary presents the key findings and recommendations from the 2001 FEMP customer survey. The key findings presented in this summary are a condensed presentation of the more detailed findings presented in each of the chapters.

  15. FEMP Focus - Special Issue 2006 - EPACT 2005 and Presidential Memo

    SciTech Connect (OSTI)

    2006-03-01

    Features information about Presidential Memorandum on Energy Conservation, Energy Policy Act 2005 Special Section, ESET FEMP Deploys Teams in Response to Natural Gas Concerns, Natural Gas Tips for Facility Managers, and more for federal agencies.

  16. FEMP and Department of Transportation Partnership Wins GreenGov...

    Office of Environmental Management (EM)

    Late last month, staff members from the Federal Energy Management Program (FEMP) were recognized with a GreenGov Presidential Green Team Award for work done in partnership with the ...

  17. FEMP First Thursday Seminar Offers Training on New Federal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy-Efficiency Standards | Department of Energy First Thursday Seminar Offers Training on New Federal Energy-Efficiency Standards FEMP First Thursday Seminar Offers Training on New Federal Energy-Efficiency Standards February 24, 2014 - 5:26pm Addthis On April 3, 2014, the U.S. Department of Energy's Federal Energy Management Program (FEMP) will present a First Thursday Seminar on New Developments in Federal Energy Efficiency Standards. This training session will be led by Mark Halverson,

  18. FEMP First Thursday Update Covers Fiscal Year 2015 Government Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Toward Energy and Sustainability Goals | Department of Energy Covers Fiscal Year 2015 Government Performance Toward Energy and Sustainability Goals FEMP First Thursday Update Covers Fiscal Year 2015 Government Performance Toward Energy and Sustainability Goals July 6, 2016 - 2:03pm Addthis The U.S. Department of Energy's (DOE) Federal Energy Management Program (FEMP) will present Fiscal Year 2015 Government Performance Toward Energy and Sustainability Goals, a new First Thursday Update on

  19. Contract Language for Energy-Consuming Product Purchases | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Products & Technologies » Energy-Efficient Products » Contract Language for Energy-Consuming Product Purchases Contract Language for Energy-Consuming Product Purchases Federal agencies are required to use specific contract language when purchasing energy-consuming products that are qualified by ENERGY STAR or designated by the Federal Energy Management Program (FEMP). See energy-efficient product purchasing requirements. Federal Acquisition Regulation Contract Language Federal

  20. Covered Product Category: Commercial Griddles

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial griddles, which is a product category covered by the ENERGY STAR program

  1. Covered Product Category: Commercial Fryers

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial fryers, which is a product category covered by the ENERGY STAR program.

  2. Covered Product Category: Residential Freezers

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for residential freezers, which are an ENERGY STAR-qualified product category.

  3. Covered Product Category: Residential Refrigerators

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for residential refrigerators, which are an ENERGY STAR-qualified product category.

  4. FEMP First Thursday Seminar Offers Training on New FederalEnergy...

    Broader source: Energy.gov (indexed) [DOE]

    On April 3, 2014, the U.S. Department of Energy's Federal Energy Management Program (FEMP) ... and facility managers but are open to all individuals through the FEMP Training database. ...

  5. FEMP Presents Its Newest On-Demand eTraining Course on Building...

    Broader source: Energy.gov (indexed) [DOE]

    Program (FEMP) has launched its latest eTraining Course, Building Automation Systems for Existing Federal Facilities for no-cost, on-demand access. In this course, FEMP Technical ...

  6. Federal Fleet Files, FEMP, Vol. 1, No. 2 - June 2009 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-06-01

    June 2009 issue of the FEMP Federal Fleet Files monthly newsletter for the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  7. FEMP Best Practices and Lessons Learned for Federal Agency ESPC Projects: Introduction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    . INTRODUCTION Energy Savings Performance Contracts (ESPCs), first authorized by EPACT 1992 1 , have become an effective tool for financing energy projects in federally owned facilities. FEMP has been providing project and training to agencies going back to 1996. As agencies have implemented projects, their acquisition teams and FEMP have taken note of lessons learned and best practices, which over time have been incorporated into the DOE ESPCs, FEMP ESPC training, and FEMP project assistance.

  8. Energy- and Water-Efficient Products | Department of Energy

    Office of Environmental Management (EM)

    and Water-Efficient Products Energy- and Water-Efficient Products The Federal Energy Management Program (FEMP) provides resources and tools to help agencies purchase energy- and ...

  9. FEMP First Thursday Update Covers Strategies for Renewable Energy Deployment

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s (DOE) Federal Energy Management Program (FEMP) will present Strategic Portfolio Planning for Renewable Energy Deployment: REopt, a new First Thursday Update webinar on January 7, 2015, from 1:30 p.m. to 2:30 p.m.

  10. FEMP's O & M Best Practices Guide: A Guide to Achieving Operational Efficiency

    SciTech Connect (OSTI)

    Sullivan, Gregory P. ); Melendez, Aldo P. ); Pugh, Ray )

    2002-10-01

    FEMP's O & M Best Practices Guide (O & M BPG) highlights O & M programs targeting energy efficiency that are estimated to save between 5% and 20% on energy bills without a significant capital investment. Depending on the Federal site, these savings can represent thousands to hundreds-of-thousands of dollars each year, and many can be achieved with minimal cash outlays. In addition to energy/resource savings, a well-run O & M program will (1)increase the safety of all staff because properly maintained equipment is safer equipment; (2)ensure the comfort, health and safety of building occupants through properly functioning equipment providing a healthy indoor environment; (3)confirm the design life expectancy of equipment is achieved; and (4)facilitate the compliance with Federal legislation such as the Clean Air Act and the Clean Water Act. The focus of this guide is to provide the Federal O & M/Energy manager and practitioner with information and actions aimed at achieving these savings and benefits. The O & M BPG was developed under the direction of the Department of Energy's Federal Energy Management Program (FEMP).

  11. FEMP Exterior Solid-State Lighting Technology Pilot | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exterior Solid-State Lighting Technology Pilot FEMP Exterior Solid-State Lighting Technology Pilot Presentation-given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting-covers the Federal Energy Management Program's (FEMP's) exterior solid-state lighting initiative and technology pilot. Download the FEMP Exterior Solid-State Lighting Technology Pilot presentation. (1.44 MB) More Documents & Publications Federal Technology Deployment Pilot: Exterior Solid State

  12. DOE FEMP Procedure for Notifying Congress Prior to Award of ESPCs |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy FEMP Procedure for Notifying Congress Prior to Award of ESPCs DOE FEMP Procedure for Notifying Congress Prior to Award of ESPCs Document displays the U.S. Department of Energy (DOE) Federal Energy Management Program's (FEMP) procedure for notifying Congress prior to awarding energy savings performance contracts (ESPCs). Download the congressional notification document. (82.36 KB) More Documents & Publications Project Facilitation and Quality Assurance for Federal

  13. DOE Order 430.2B Executable Plan for LM (DOE FEMP Final) 2009 | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Order 430.2B Executable Plan for LM (DOE FEMP Final) 2009 DOE Order 430.2B Executable Plan for LM (DOE FEMP Final) 2009 DOE Order 430.2B Executable Plan for LM (DOE FEMP Final) 2009 2009 (239.55 KB) More Documents & Publications DOE Order 430.2B Executable Plan for LM 2008 RPAM &amp; Energy Order Requirements 2015 Site Sustainability

  14. FEMP First Thursday Update Provides Details about the 2016 Energy Exchange

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training and Trade Show | Department of Energy Provides Details about the 2016 Energy Exchange Training and Trade Show FEMP First Thursday Update Provides Details about the 2016 Energy Exchange Training and Trade Show April 6, 2016 - 3:38pm Addthis FEMP First Thursday Update Provides Details about the 2016 Energy Exchange Training and Trade Show The U.S. Department of Energy Federal Energy Management Program (FEMP) will host 2016 Energy Exchange Update, a First Thursday Update webinar on May

  15. Covered Product Category: Residential Air-Source Heat Pumps

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for residential air-source heat pumps, which is an ENERGY STAR qualified product category.

  16. Covered Product Category: Residential Heat Pump Water Heaters...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat Pump Water Heaters Covered Product Category: Residential Heat Pump Water Heaters The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal ...

  17. Covered Product Category: Water-Cooled Electric Chillers | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Covered Product Category: Water-Cooled Electric Chillers The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for water-co...

  18. Covered Product Category: Residential Windows, Doors, and Skylights...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Windows, Doors, and Skylights Covered Product Category: Residential Windows, Doors, and Skylights The Federal Energy Management Program (FEMP) provides acquisition ...

  19. Covered Product Category: Residential Electric Resistance Water Heaters

    Broader source: Energy.gov [DOE]

    FEMP sets federal efficiency requirements and provides acquisition guidance across a variety of product categories, including residential electric resistance water heaters.

  20. Public water supply and distribution at the FEMP

    SciTech Connect (OSTI)

    Neary, C.

    1997-10-01

    On February 17th, 1996, the Fernald Environmental Management Project (FEMP), a former Department of Energy uranium processing facility near the rural town of Fernald, Ohio, became a ``user`` instead of a ``producer``, of potable water by tying into the Cincinnati Water Works new Public Water Supply System. This satisfied the future site needs of potable water and nullified the need to follow the sampling requirements set forth by the Environmental Protection Agency and the Safe Drinking Water Act for potable water producers. This transformation into a customer also reduced the long water transmission time from the Cincinnati Water Works station to the small community that would have occurred without a large user such as the FEMP being on line.

  1. FEMP's Assisting Federal Facilities with Energy Conservation Technologies (AFFECT)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFFECT 2016 Assisting Federal Facilities with Energy Conservation Technologies (AFFECT) June 8, 2016 David Boomsma AFFECT Program Manager Federal Energy Management Program (FEMP) Energy Efficiency and Renewable Energy Department of Energy Federal Energy Management Program 2 Event Date FOA Issue Date May 26, 2016 Letter of Intent (LOI) Deadline June 27, 2016 5:00pm ET Full Application Deadline July 27, 2016 5:00pm ET Notification of Award Selections October 28, 2016 Timeframe for Award

  2. Federal Fleet Files, FEMP, Vol. 2, No. 8 - June 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    June 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  3. EERE Success Story—FEMP Completes 2000th Renewable Energy Optimization Screening

    Broader source: Energy.gov [DOE]

    NREL's Renewable Energy Optimization (REopt) tool, developed through FEMP funding, is a screening tool that identifies and prioritizes cost-effective renewable energy opportunities at a single site...

  4. FEMP and Department of Transportation Partnership Wins GreenGov Award

    Broader source: Energy.gov [DOE]

    Members of FEMP's staff were recognized with a GreenGov Presidential Green Team Award for work done in partnership with the Department of Transportation.

  5. Federal Fleet Files, FEMP, Vol. 2, No. 3 - December 2009 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-12-01

    December 2009 update of monthly news from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  6. Federal Fleet Files, FEMP, Vol. 2, No. 7 - May 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-05-01

    May 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  7. Federal Fleet Files, FEMP, Vol. 1, No. 3 - July 2009 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01

    July 2009 issue of the monthly newsletter for the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  8. FEMP Offers New eTraining on Federal Energy-Efficient Procurement

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) presents Contracting for Efficiency, a new eTraining core course.

  9. FEMP'S O&M Best Practices Guide A Guide to Achieving Operational...

    Office of Scientific and Technical Information (OSTI)

    Efficiency The Federal Energy Management Program's (FEMP's) O&M Best Practices ... under the direction of the Department of Energy's Federal Energy Management Program. ...

  10. FEMPS O & M Best Practices Guide: A Guide to Achieving Operational...

    Office of Scientific and Technical Information (OSTI)

    Efficiency The Federal Energy Management Programs (FEMPs) Operations and ... under the direction of the Department of Energy's Federal Energy Management Program. ...

  11. Federal Fleet Files, FEMP, Vol. 2, No. 9 - July 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    July 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  12. Federal Fleet Files, FEMP, Vol. 2, No. 5 - March 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-03-01

    March 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  13. Federal Fleet Files, FEMP, Vol. 2, No. 1 - October 2009 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-10-01

    October 2009 issue of monthly news from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  14. Federal Fleet Files, FEMP, Vol. 2, No. 10 - September 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01

    September 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  15. Federal Fleet Files, FEMP, Vol. 2, No. 4 - January 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-01-01

    January 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  16. Federal Fleet Files, FEMP, Vol. 2, No. 11 - October 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-10-01

    October 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  17. Federal Fleet Files, FEMP, Vol. 2, No. 12 - November 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-11-01

    November 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  18. DOE TRANSCOM Technical Support Services DE-EM0002903 I-1 PART...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Star products. (4) Energy efficient products are at http:www.femp.energy.govprocurement for FEMP designated products. (5) Environmentally preferable and energy ...

  19. FEMP Focus - Winter/Spring 2005

    SciTech Connect (OSTI)

    2005-04-04

    Features information about technical assistance, distibuted energy, energy efficiennt products, alternative financing, solar air conditioning, solar heating and lighting, wastewater digester, T5 fluorescent technology, and more for federal agencies.

  20. Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

    SciTech Connect (OSTI)

    Not Available

    1991-11-01

    This report documents the results of the Environment, Safety, and Health (ES&H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES&H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES&H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES&H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES&H issues.

  1. Energy Savings Performance Contracts (ESPC): FEMP Assistance

    SciTech Connect (OSTI)

    2012-11-01

    An ESPC is a working relationship between a Federal agency and an energy service company (ESCO). The ESCO conducts a comprehensive energy audit for the Federal facility and identifies improvements to save energy. In consultation with the Federal agency, the ESCO designs and constructs a project that meets the agency’s needs and arranges the necessary funding. The ESCO guarantees the improvements will generate energy cost savings sufficient to pay for the project over the term of the contract. After the contract ends, all additional cost savings accrue to the agency.

  2. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance for Geothermal Resource Evaluation Projects

    SciTech Connect (OSTI)

    Robert P. Breckenridge; Thomas R. Wood; Joel Renner

    2010-09-01

    The purpose of this document is to report on the evaluation of geothermal resource potential on and around three different United States (U. S.) Air Force Bases (AFBs): Nellis AFB and Air Force Range (AFR) in the State of Nevada (see maps 1 and 5), Holloman AFB in the State of New Mexico (see map 2), and Mountain Home AFB in the State of Idaho (see map 3). All three sites are located in semi-arid parts of the western U. S. The U. S. Air Force, through its Air Combat Command (ACC) located at Langley AFB in the State of Virginia, asked the Federal Energy Management Program (FEMP) for technical assistance to conduct technical and feasibility evaluations for the potential to identify viable geothermal resources on or around three different AFBs. Idaho National Laboratory (INL) is supporting FEMP in providing technical assistance to a number of different Federal Agencies. For this report, the three different AFBs are considered one project because they all deal with potential geothermal resource evaluations. The three AFBs will be evaluated primarily for their opportunity to develop a geothermal resource of high enough quality grade (i.e., temperature, productivity, depth, etc.) to consider the possibility for generation of electricity through a power plant. Secondarily, if the resource for the three AFBs is found to be not sufficient enough for electricity generation, then they will be described in enough detail to allow the base energy managers to evaluate if the resource is suitable for direct heating or cooling. Site visits and meetings by INL personnel with the staff at each AFB were held in late FY-2009 and FY-2010. This report provides a technical evaluation of the opportunities and challenges for developing geothermal resources on and around the AFBs. An extensive amount of literature and geographic information was evaluated as a part of this assessment. Resource potential maps were developed for each of the AFBs.

  3. U.S. Army Corps of Engineers and FEMP Partner to Drive Down Federal Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Costs | Department of Energy Army Corps of Engineers and FEMP Partner to Drive Down Federal Energy Costs U.S. Army Corps of Engineers and FEMP Partner to Drive Down Federal Energy Costs March 4, 2015 - 4:47pm Addthis The U.S. Army Corps of Engineers (USACE) and the U.S. Department of Energy's Federal Energy Management Program (FEMP) developed a partnership to help drive down the federal government's energy costs through the government-wide adoption of performance contracting processes.

  4. FEMP Debuts New eTraining on Sustainable Acquisition for Federal Agencies |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Debuts New eTraining on Sustainable Acquisition for Federal Agencies FEMP Debuts New eTraining on Sustainable Acquisition for Federal Agencies July 20, 2016 - 3:29pm Addthis FEMP Debuts New eTraining on Sustainable Acquisition for Federal Agencies The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) presents Sustainable Acquisition for Federal Agencies, a new eTraining core course. This online course was developed in partnership with the U.S.

  5. FEMP First Thursday Update: FY2015 Government Performance Toward Energy and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sustainability Goals | Department of Energy FEMP First Thursday Update: FY2015 Government Performance Toward Energy and Sustainability Goals FEMP First Thursday Update: FY2015 Government Performance Toward Energy and Sustainability Goals August 4, 2016 1:30PM to 2:30PM EDT Webcast The U.S. Department of Energy Federal Energy Management Program (FEMP) will present a new First Thursday Update webinar on August 4, 2016 from 1:30 p.m. to 2:30 p.m., Fiscal Year 2015 Government Performance Toward

  6. PLUTONIUM-238 PRODUCTION TARGET DESIGN STUDIES

    SciTech Connect (OSTI)

    Hurt, Christopher J [ORNL; Wham, Robert M [ORNL; Hobbs, Randall W [ORNL; Owens, R Steven [ORNL; Chandler, David [ORNL; Freels, James D [ORNL; Maldonado, G Ivan [ORNL

    2014-01-01

    A new supply chain is planned for plutonium-238 using existing reactors at the Oak Ridge National Laboratory (ORNL) and Idaho National Laboratory (INL) and existing chemical recovery facilities at ORNL. Validation and testing activities for new irradiation target designs have been conducted in three phases over a 2 year period to provide data for scale-up to production. Target design, qualification, target fabrication, and irradiation of fully-loaded targets have been accomplished. Data from post-irradiation examination (PIE) supports safety analysis and irradiation of future target designs.

  7. FEMP Offers Updated Training on the Guiding Principles for High-Performance and Sustainable Buildings

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s Federal Energy Management Program (FEMP) presents an updated series of training courses focused on the Guiding Principles for Federal Leadership in High-Performance...

  8. FEMP Offers New Training on Photovoltaic Operations and Maintenance Best Practices

    Broader source: Energy.gov [DOE]

    FEMP will present O&M Best Practices for Small Scale PV Systems, a live First Thursday Seminar on December 4, 2014, from 1:30 p.m. to 3 p.m.

  9. FEMP Outdoor Solid-State Lighting Intiative: Resources for Outdoor SSL Applications

    Broader source: Energy.gov [DOE]

    Fact sheet describes the Federal Energy Management Program's (FEMP) solid-state lighting (SSL) initiatives that provide information and resources for the application of SSL lighting in exterior spaces.

  10. FEMP Helps Federal Facilities Develop Large-Scale Renewable Energy Projects

    Broader source: Energy.gov [DOE]

    FEMP developed a guide to help federal agencies, as well as the developers and financiers that work with them, to successfully install large-scale renewable energy projects at federal facilities.

  11. Federal Energy Management Program (FEMP) Technical Assistance Request Portal User Guide

    Broader source: Energy.gov [DOE]

    Document explains how to navigate the FEMP Technical Assistance request portal. It includes instruction on how to register for an account, submit a request for assistance, and review saved requests.

  12. Practical Guide to Savings and Payments in FEMP ESPC Task Orders

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document conveys to Federal agencies how to interpret and apply the statutes and rules governing cost savings and payments for energy savings performance contracts (ESPCs) under the Federal Energy Management Program (FEMP).

  13. FEMP Assists White House in Setting GHG Reduction Target for Federal Government

    Broader source: Energy.gov [DOE]

    Earlier this year, EEREs Federal Energy Management Program (FEMP) provided key data and analytical support to the White House Council on Environmental Quality to determine the government-wide...

  14. FEMP Presents Its Newest On-Demand eTraining Course on Building Automation Systems

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) has launched its latest eTraining Course, Building Automation Systems for Existing Federal Facilities for no-cost, on-demand access.

  15. SILC target design for accelerator production of tritium (APT...

    Office of Scientific and Technical Information (OSTI)

    SILC target design for accelerator production of tritium (APT) Citation Details In-Document Search Title: SILC target design for accelerator production of tritium (APT) An ...

  16. Design Case Summary: Production of Mixed Alcohols from Municipal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Case Summary: Production of Mixed Alcohols from Municipal Solid Waste via Gasification Design Case Summary: Production of Mixed Alcohols from Municipal Solid Waste via ...

  17. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    H.C. Maru; M. Farooque

    2003-03-01

    The program efforts are focused on technology and system optimization for cost reduction, commercial design development, and prototype system field trials. The program is designed to advance the carbonate fuel cell technology from full-size field test to the commercial design. FuelCell Energy, Inc. (FCE) is in the later stage of the multiyear program for development and verification of carbonate fuel cell based power plants supported by DOE/NETL with additional funding from DOD/DARPA and the FuelCell Energy team. FCE has scaled up the technology to full-size and developed DFC{reg_sign} stack and balance-of-plant (BOP) equipment technology to meet product requirements, and acquired high rate manufacturing capabilities to reduce cost. FCE has designed submegawatt (DFC300A) and megawatt (DFC1500 and DFC3000) class fuel cell products for commercialization of its DFC{reg_sign} technology. A significant progress was made during the reporting period. The reforming unit design was optimized using a three-dimensional stack simulation model. Thermal and flow uniformities of the oxidant-In flow in the stack module were improved using computational fluid dynamics based flow simulation model. The manufacturing capacity was increased. The submegawatt stack module overall cost was reduced by {approx}30% on a per kW basis. An integrated deoxidizer-prereformer design was tested successfully at submegawatt scale using fuels simulating digester gas, coal bed methane gas and peak shave (natural) gas.

  18. The FEMP Awards Program: Fostering Institutional Change and Energy Management Excellence

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PNNL-23318 The FEMP Awards Program: Fostering Institutional Change and Energy Management Excellence May 2014 C McDermott EL Malone PNNL-23318 The FEMP Awards Program: Fostering Institutional Change and Energy Management Excellence C McDermott EL Malone May 2014 Prepared for the U.S. Department of Energy under Contract DEAC0576RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 PNNL-23318 Summary This report assesses the use of institutional change principles and the

  19. EERE Success Story-FEMP Helps Federal Facilities Develop Large-Scale

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Energy Projects | Department of Energy FEMP Helps Federal Facilities Develop Large-Scale Renewable Energy Projects EERE Success Story-FEMP Helps Federal Facilities Develop Large-Scale Renewable Energy Projects August 21, 2013 - 12:00am Addthis EERE's Federal Energy Management Program issued a new resource that provides best practices and helpful guidance for federal agencies developing large-scale renewable energy projects. The resource, Large-Scale Renewable Energy Guide:

  20. Molten carbonate fuel cell product design improvement

    SciTech Connect (OSTI)

    P. Voyentzie; T. Leo; A. Kush; L. Christner; G. Carlson; C. Yuh

    1998-12-20

    Drawing on the manufacture, field test, and post-test experience of the sixteen Santa Clara Demonstration Project (SCDP) stacks, ERC is finalizing the next generation commercial entry product design. The second generation cells are 50% larger in area, 40% lighter on equal geometric area basis, and 30% thinner than the earlier design. These improvements have resulted in doubling of the full-height stack power. A low-cost and high-strength matrix has also been developed for improving product ruggedness. The low-cost advanced cell design incorporating these improvements has been refined through six short stack tests. Power production per cell of two times the SCDP maximum power operation, over ten thermal cycles, and overall operating flexibility with respect to load and thermal changes have been demonstrated in these short stack tests. An internally insulated stack enclosure has been designed and fabricated to eliminate the need for an inert gas environment during operation. ERC has acquired the capability for testing 400kW full-height direct fuel ceil (DFC) stack and balance-of-plant equipment. With the readiness of the power plant test facility, the cell package design, and the stack module, full-height stack testing has begun. The first full- height stack incorporating the post-SCDP second generation design was completed. The stack reached a power level of 253 kW, setting a world record for the highest power production from the advanced fuel cell system. Excellent performance uniformity at this power level affirmed manufacturing reproducibility of the components at the factory. This unoptimized small size test has achieved pipeline natural gas to DC electricity conversion efficiency of 47% (based on lower heating value - LHV) including the parasitic power consumed by the BOP equipment; that should translate to more than 50% efficiency in commercial operation, before employing cogeneration. The power plant system also operated smoothly. With the success of this

  1. Find Product Categories Covered by Efficiency Programs

    Broader source: Energy.gov [DOE]

    Federal agencies are required to purchase energy-efficient products. To help buyers meet these requirements, the Federal Energy Management Program (FEMP) maintains acquisition guidance for energy- and water-efficient covered product categories.

  2. Covered Product Category: Light Fixtures (Luminaires)

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including luminaires, or light fixtures. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR® and FEMP provide programmatic guidance for various types of luminaires. See table 2 for more information about which types of light fixtures are covered by which program (FEMP or ENERGY STAR). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  3. Production plant separator system conceptual design

    SciTech Connect (OSTI)

    Ng, E.; Kan, T.

    1994-12-31

    A full conceptual design has been completed for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant capable of producing {approximately}1700 metric tons of enriched uranium per year (MTU/y). This plant is the first step in the deployment of AVLIS enrichment technology, which will provide inexpensive, dependable, and environmentally safe uranium enrichment services to utility customers. Previous issues of the ISAM Semiannual Report describe other major systems in the plant, namely the laser, feed and product systems. This article describes the design of the separator system. The separator system is a a key component in the plant. After the feed conversion system converts uranium trioxide (UO{sub 3}) to a uranium-iron alloy, the alloy enters the separator system. In the separator, and intense electron beam vaporizes uranium metal in a vacuum chamber. In the laser system, fixed-frequency copper-vapor lasers pump tunable dye lasers. These precisely tuned dye lasers then selectively excite and ionize uranium-235 atoms in the vapor stream, leaving the uranium-238 atoms untouched. The photo-ions of uranium-235 are then drawn to an electrically biased collector, producing the enriched product stream. The remaining vapor flows through, producing the depleted tails stream. Both product and tails streams are continuously removed from the separator pod as flowing liquid uranium metal. Withdrawal containers are used to collect separately the enriched and depleted uranium. The enriched product will be converted by fuel fabricators to uranium dioxide (UO{sub 2}) and used to fabricate reactor fuel assemblies for utility customers.

  4. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    H.C. Maru; M. Farooque

    2004-08-01

    The ongoing program is designed to advance the carbonate fuel cell technology from full-size proof-of-concept field test to the commercial design. DOE has been funding Direct FuelCell{reg_sign} (DFC{reg_sign}) development at FuelCell Energy, Inc. (FCE) for stationary power plant applications. The program efforts are focused on technology and system optimization for cost reduction, leading to commercial design development and prototype system field trials. FCE, Danbury, CT, is a world-recognized leader for the development and commercialization of high efficiency fuel cells that can generate clean electricity at power stations, or at distributed locations near the customers such as hospitals, schools, universities, hotels and other commercial and industrial applications. FCE has designed three different fuel cell power plant models (DFC300A, DFC1500 and DFC3000). FCE's power plants are based on its patented DFC{reg_sign} technology, where the fuel is directly fed to the fuel cell and hydrogen is generated internally. These power plants offer significant advantages compared to the existing power generation technologies--higher fuel efficiency, significantly lower emissions, quieter operation, flexible siting and permitting requirements, scalability and potentially lower operating costs. Also, the exhaust heat by-product can be used for cogeneration applications such as high-pressure steam, district heating and air conditioning. Several FCE sub-megawatt power plants are currently operating in Europe, Japan and the US. Because hydrogen is generated directly within the fuel cell module from readily available fuels such as natural gas and waste water treatment gas, DFC power plants are ready today and do not require the creation of a hydrogen infrastructure. Product improvement progress made during the reporting period in the areas of technology, manufacturing processes, cost reduction and balance of plant equipment designs is discussed in this report.

  5. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    H.C. Maru; M. Farooque

    2005-03-01

    The program was designed to advance the carbonate fuel cell technology from full-size proof-of-concept field test to the commercial design. DOE has been funding Direct FuelCell{reg_sign} (DFC{reg_sign}) development at FuelCell Energy, Inc. (FCE, formerly Energy Research Corporation) from an early state of development for stationary power plant applications. The current program efforts were focused on technology and system development, and cost reduction, leading to commercial design development and prototype system field trials. FCE, in Danbury, CT, is a world-recognized leader for the development and commercialization of high efficiency fuel cells that can generate clean electricity at power stations, or at distributed locations near the customers such as hospitals, schools, universities, hotels and other commercial and industrial applications. FCE has designed three different fuel cell power plant models (DFC300A, DFC1500 and DFC3000). FCE's power plants are based on its patented DFC{reg_sign} technology, where a hydrocarbon fuel is directly fed to the fuel cell and hydrogen is generated internally. These power plants offer significant advantages compared to the existing power generation technologies--higher fuel efficiency, significantly lower emissions, quieter operation, flexible siting and permitting requirements, scalability and potentially lower operating costs. Also, the exhaust heat by-product can be used for cogeneration applications such as high-pressure steam, district heating and air conditioning. Several sub-MW power plants based on the DFC design are currently operating in Europe, Japan and the US. Several one-megawatt power plant design was verified by operation on natural gas at FCE. This plant is currently installed at a customer site in King County, WA under another US government program and is currently in operation. Because hydrogen is generated directly within the fuel cell module from readily available fuels such as natural gas and waste

  6. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    H. C. Maru; M. Farooque

    2003-12-19

    The ongoing program is designed to advance the carbonate fuel cell technology from full-size proof-of-concept field test to the commercial design. DOE has been funding Direct FuelCell{reg_sign} (DFC{reg_sign}) development at FuelCell Energy, Inc. (FCE) for stationary power plant applications. The program efforts are focused on technology and system optimization for cost reduction leading to commercial design development and prototype system field trials. FCE, Danbury, CT, is a world-recognized leader for the development and commercialization of high efficiency fuel cells that can generate clean electricity at power stations or in distributed locations near the customer, including hospitals, schools, universities, hotels and other commercial and industrial applications. FuelCell Energy has designed three different fuel cell power plant models (DFC300, DFC1500 and DFC3000). FCE's power plants are based on its patented Direct FuelCell technology, where the fuel is directly fed to fuel cell and hydrogen is generated internally. These power plants offer significant advantages compared to existing power generation technologies--higher fuel efficiency, significantly lower emissions, quieter operation, flexible siting and permitting requirements, scalability and potentially lower operating costs. Also, the exhaust heat by-product can be used for cogeneration applications such as high-pressure steam, district heating, and air conditioning. Several FCE sub-megawatt power plants are currently operating in Europe, Japan and the US. Because hydrogen is generated directly within the fuel cell module from readily available fuels such as natural gas and waste water treatment gas, DFC power plants are ready today and do not require the creation of a hydrogen infrastructure. Product improvement progress made during the reporting period in the areas of technology, manufacturing processes, cost reduction and balance of plant equipment designs is discussed in this report. FCE's DFC

  7. FEMP Best Practices and Lessons Learned for Federal Agency ESPC Projects: ESCO Selection

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4. ESCO SELECTION Best practices for ESCO selection are the following. 4.1 FEMP recommends that agencies use the Selection by Qualifications (SBQ) method (as described in the DOE IDIQ at section H.3.1) and standardize their SBQ process. FEMP ESPC experts and agencies with ESPC experience have observed that the SBQ method can elicit as much useful information for finding the best ESCO for a specific project as other more complex, costly, labor-intensive, and time-consuming methods. Agencies have

  8. DE-EM0003383

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ...products for Energy Star products and FEMP designated products are at http:energy.goveerefempenergy- efficient-product-procurement Environmentally ...

  9. Covered Product Category: Light Fixtures (Luminaires) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Covered Product Category: Light Fixtures (Luminaires) Covered Product Category: Light Fixtures (Luminaires) The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for light fixtures or luminaires. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR and FEMP provide programmatic guidance for various types of luminaires. See Table 2 for more information about which types of

  10. Covered Product Category: Cool Roof Products

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including cool roof products, which are an ENERGY STAR®-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  11. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    H.C. Maru; M. Farooque

    2002-02-01

    generation, industrial cogeneration, marine applications and uninterrupted power for military bases. FuelCell Energy operated a 1.8 MW plant at a utility site in 1996-97, the largest fuel cell power plant ever operated in North America. This proof-of-concept power plant demonstrated high efficiency, low emissions, reactive power control, and unattended operation capabilities. Drawing on the manufacture, field test, and post-test experience of the full-size power plant; FuelCell Energy launched the Product Design Improvement (PDI) program sponsored by government and the private-sector cost-share. The PDI efforts are focused on technology and system optimization for cost reduction, commercial design development, and prototype system field trials. The program was initiated in December 1994. Year 2000 program accomplishments are discussed in this report.

  12. Plant Design for the Production of DUAGG

    SciTech Connect (OSTI)

    Ferrada, J.J.

    2003-02-04

    The cost of producing DUAGG is an important consideration for any interested private firm in determining whether DUCRETE is economically viable as a material of construction in next-generation spent nuclear fuel casks. This study analyzed this project as if it was a stand-alone project. The capital cost includes engineering design, equipment costs and installation, start up, and management; the study is not intended to be a life-cycle cost analysis. The costs estimated by this study are shown in Table ES.1, and the conclusions of this study are listed in Table ES.2. The development of DUAGG and DUCRETE is a major thrust of the Depleted Uranium Uses Research and Development Project. An obvious use of depleted uranium is as a shielding material (e.g., DUCRETE). DUCRETE is made by replacing the conventional stone aggregate in concrete with DUAGG. One objective of this project is to bring the development of DUCRETE to a point at which a demonstrated basis exists for its commercial deployment. The estimation of the costs to manufacture DUAGG is an important part of this effort. Paul Lessing and William Quapp developed DUAGG and DUCRETE as part of an Idaho National Engineering and Environmental Laboratory (INEEL) program to find beneficial uses for depleted uranium (DU). Subsequently, this technology was licensed to Teton Technologies, Inc. The DUAGG process mixes DUO{sub 2} with sintering materials and additives to form pressed briquettes. These briquettes are sintered at 1300 C, and the very dense sintered briquettes are then crushed and classified into gap-graded size fractions. The graded DUAGG is then ready to be used to make high-strength heavy DUCRETE. The DUCRETE shielding will be placed into an annular steel cask-shell mold, which has internal steel reinforcing bars. The objectives of this study are to (1) use previous DUAGG process developments to design a plant that will produce DUAGG at a baseline rate, (2) determine the size of the equipment required to meet

  13. FEMP: Seven steps to saving: How to implement energy-saving projects

    SciTech Connect (OSTI)

    Pitchford, P.

    1999-05-26

    The Energy Policy Act of 1992 and supporting Executive Orders have directed Federal agencies to implement cost-effective energy and water efficient measures to help conserve natural resources and protect the environment. Federal energy and facility managers can make a big difference. DOE's Federal Energy Management Program (FEMP) has outlined seven steps on how to implement an energy-saving project.

  14. FEMP Presents Latest Training Course on Advanced Energy Savings Performance Contracting

    Broader source: Energy.gov [DOE]

    In this course, FEMP Technical Lead Kurmit Rockwell offers in-depth instruction on energy savings performance contracting (ESPC), including primary concepts, timelines, authorizing legislation, and stakeholder roles and responsibilities, and discusses key documents and processes related to the five phases of the ESPC development process.

  15. FEMP First Thursday Update Covers Updates to 2016 Federal Energy and Water Management Awards Criteria

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Federal Energy Management Program (FEMP) will present a new First Thursday Update webinar on February 4, 2016 from 1:30 p.m. to 2:30 p.m., 2016 Federal Energy and Water Management Awards Updates.

  16. FEMP fiscal year 1999 ESPC business strategy development summary report[Energy Saving Performance Contract

    SciTech Connect (OSTI)

    KL McMordie-Stoughton; WDM Hunt

    2000-05-04

    The mission of the US Department of Energy's Federal Energy Management Program (FEMP) is to reduce the cost of Government by advancing energy efficiency, water conservation, and the use of solar and other renewable technologies. This is accomplished by creating partnerships, leveraging resources, transferring technology, and providing training and technical guidance and assistance to agencies. Each of these activities is directly related to achieving requirements set forth in the Energy Policy Act of 1992 and the goals that have been established in Executive Order 13123 (June 1999), but also those that are inherent in sound management of Federal financial and personnel resources. The Pacific Northwest National Laboratory (PNNL) supports the FEMP mission in all activity areas. This responsibility includes working with various Federal energy managers to identify, monitor, and evaluate the performance of new energy efficiency technologies suitable for installation at Federal sites. This report provides the results of a Energy Saving Performance Contracting (ESPC) Business Strategy Development project that PNNL conducted for FEMP. The project provides information regarding the development of Federal market scenarios for FEMP Super-ESPC delivery orders. Two market scenarios were developed. The initial scenario resulted in an estimated delivery order target that was much lower than initially estimated in the spring of 1998. The second scenario yielded a lower estimated number of delivery orders. The main difference between these two scenarios was an estimated increase in utility financed projects in the Federal sector.

  17. Practical Guide to Savings and Payments in FEMP ESPC Task Orders

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading by example, saving energy and taxpayer dollars in federal facilities Practical Guide to Savings and Payments in FEMP ESPC Task Orders Rev. 3 January 2009 Contents Preface ........................................................................................................................................ 1. Purpose and Scope of the Practical Guide.............................................................. 1 2. Legislation and Rules

  18. Building and Home Design Products and Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Home Design Products and Services Building and Home Design Products and Services Production builder Centex Homes built ultra-efficient model homes in San Ramon, California.’s Aventura and Lunaria community developments. Credit: Davis Energy Group. Production builder Centex Homes built ultra-efficient model homes in San Ramon, California.'s Aventura and Lunaria community developments. Credit: Davis Energy Group. Here you'll find a list of products and services for buyers and builders of

  19. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    SciTech Connect (OSTI)

    Unknown

    2000-01-01

    The FCE PDI program is designed to advance the carbonate fuel cell technology from the current full-size field test to the commercial design. The specific objectives selected to attain the overall program goal are: Define power plant requirements and specifications; Establish the design for a multifuel, low-cost, modular, market-responsive power plant; Resolve power plant manufacturing issues and define the design for the commercial-scale manufacturing facility; Define the stack and balance-of-plant (BOP) equipment packaging arrangement, and module designs; Acquire capability to support developmental testing of stacks and critical BOP equipment to prepare for commercial design; and Resolve stack and BOP equipment technology issues, and design, build and field test a modular prototype power plant to demonstrate readiness for commercial entry.

  20. Subscribe to Energy-Efficient Product Procurement Updates

    Broader source: Energy.gov [DOE]

    FEMP offers e-mail updates covering energy-efficient product procurement requirements, guidance, and assistance. Enter your e-mail address below to begin the registration process. After you...

  1. Design, Construction, and Implementation of Novel Biofuel Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design, Construction, and Implementation of Novel Biofuel Production Capabilities in Filamentous Fungi March 26, 2015 Technology Area Review Kenneth S. Bruno Pacific Northwest ...

  2. Design Case Summary: Production of Mixed Alcohols from Municipal Solid

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste via Gasification | Department of Energy Design Case Summary: Production of Mixed Alcohols from Municipal Solid Waste via Gasification Design Case Summary: Production of Mixed Alcohols from Municipal Solid Waste via Gasification The Bioenergy Technologies Office develops design cases to understand the current state of conversion technologies and to determine where improvements need to take place in the future. This design case establishes cost targets for converting MSW to ethanol and

  3. Sell Energy-Efficient Products: A Guide for Selling to the U.S. Government

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program’s (FEMP's) Sell Energy-Efficient Products fact sheet shows manufacturers and vendors how to increase sales potential by helping federal purchasers meet their energy-efficient product purchasing requirements.

  4. FEMP Offers New eTraining Core Course on Fundamentals of Life Cycle Costing for Energy Conservation

    Broader source: Energy.gov [DOE]

    FEMP presents a new e-Training Core Course that providing skills to improve Federal economic-based decision making, determine the total cost of ownership of project alternatives, and inform decisions for energy and water efficiency investments.

  5. Designer proton-channel transgenic algae for photobiological hydrogen production

    SciTech Connect (OSTI)

    Lee, James Weifu

    2011-04-26

    A designer proton-channel transgenic alga for photobiological hydrogen production that is specifically designed for production of molecular hydrogen (H.sub.2) through photosynthetic water splitting. The designer transgenic alga includes proton-conductive channels that are expressed to produce such uncoupler proteins in an amount sufficient to increase the algal H.sub.2 productivity. In one embodiment the designer proton-channel transgene is a nucleic acid construct (300) including a PCR forward primer (302), an externally inducible promoter (304), a transit targeting sequence (306), a designer proton-channel encoding sequence (308), a transcription and translation terminator (310), and a PCR reverse primer (312). In various embodiments, the designer proton-channel transgenic algae are used with a gas-separation system (500) and a gas-products-separation and utilization system (600) for photobiological H.sub.2 production.

  6. Design of petroleum products terminal wastewater systems

    SciTech Connect (OSTI)

    Klock, B.

    1995-12-31

    Petroleum products terminals, used in conjunction with transportation operations to accomplish the flow of products from their source in refineries down to the consumers, are relatively simple facilities comprising product storage, the means for connecting storage to transportation operations, and other operations to support those functions. Although wastewater generation at terminals is relatively minor, increasingly strict regulation of wastewater from even minor sources is making it more critical that terminal wastewater handling, treatment, and disposal be understood and optimized to ensure that effective wastewater treatment is accomplished at reasonable cost. Anticipating the increased demands on terminal wastewater handling, the API Marketing Terminal Effluent Task Force has sponsored a number of studies to characterize wastewater at terminals and to develop practical means for treating the water. In addition, the Task Force sponsored Texaco`s writing of the report on which this paper is based, API 4602, Minimization, Handling, Treatment, and Disposal of Petroleum Products Terminal Wastewaters. This paper highlights some of the key recommendations in the report, which are: (1) begin characterizing the terminal`s tank bottoms water flow and quality as soon as possible; (2) determine the optimum wastewater disposal option; (3) for most situations, segregate stormwater from contaminated water; (4) if wastewater is treated, use a collection tank to equalize the flow and concentration of tank bottoms water; (5) if wastewater is hauled off to a disposal company, consider removing benzene first; and (6) minimize the use of detergents in the terminal.

  7. Technologies for Distributed Energy Resources. Federal Energy Management Program (FEMP) Technical Assistance Fact Sheet

    SciTech Connect (OSTI)

    Pitchford, P.; Brown, T.

    2001-07-16

    This four-page fact sheet describes distributed energy resources for Federal facilities, which are being supported by the U.S. Department of Energy's (DOE's) Federal Energy Management Program (FEMP). Distributed energy resources include both existing and emerging energy technologies: advanced industrial turbines and microturbines; combined heat and power (CHP) systems; fuel cells; geothermal systems; natural gas reciprocating engines; photovoltaics and other solar systems; wind turbines; small, modular biopower; energy storage systems; and hybrid systems. DOE FEMP is investigating ways to use these alternative energy systems in government facilities to meet greater demand, to increase the reliability of the power-generation system, and to reduce the greenhouse gases associated with burning fossil fuels.

  8. Distributed Energy Resources at Federal Facilities. Federal Energy Management Program (FEMP) Technical Assistance Fact Sheet

    SciTech Connect (OSTI)

    Pitchford, P.

    2001-07-16

    This two-page overview describes how the use of distributed energy resources at Federal facilities is being supported by the U.S. Department of Energy's (DOE's) Federal Energy Management Program (FEMP). Distributed energy resources include both existing and emerging energy technologies: advanced industrial turbines and microturbines; combined heat and power (CHP) systems; fuel cells; geothermal systems; natural gas reciprocating engines; photovoltaics and other solar systems; wind turbines; small, modular biopower; energy storage systems; and hybrid systems. DOE FEMP is investigating ways to use these alternative energy systems in government facilities to meet greater demand, to increase the reliability of the power-generation system, and to reduce the greenhouse gases associated with burning fossil fuels.

  9. FEMP Video Success Story: University of California, Irvine, Smart Labs Initiative

    Broader source: Energy.gov [DOE]

    This video success story covers a DOE Better Buildings Challenge partner that achieves 60% energy savings through dynamic, intelligent HVAC technologies. Seven essential components include lowering system pressure drop, demand based ventilation, dynamic digital controls, fume hood air flow optimization, exhaust fan discharge velocity optimization, demand based LED lighting with controls, and continuous commissioning with automated cross platform fault detection. For more information, watch the FEMP First Thursday Seminar, Federal Thought Leaders Roundtable.

  10. Huntington Veterans Affairs Medical Center - Faucet and Showerhead Replacement Project: Best Management Practice Case Study #7: Faucets and Showerheads, Federal Energy Management Program (FEMP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-12-01

    Case study overview of the Huntington Veterans Affairs Medical Center water efficiency program as part of FEMP's water efficiency best management practice series.

  11. FEMP Resources for Sustainable Buildings | Open Energy Information

    Open Energy Info (EERE)

    Rating System Green Globes Rating System High Performance Federal Buildings Database Business Case for Sustainable Design in Federal Facilities Sustainability and Security...

  12. Research identifies designs for lowering subsea production cost

    SciTech Connect (OSTI)

    Rothberg, R.H.; Hall, J.E. ); Douglas, L.D. ); Manuel, W.S. ); Kirkland, K.G.

    1993-03-08

    To reduce costs and simplify installation operations for subsea hardware, Amoco Production Co. in 1986 began the development of a diverless subsea production system (DSPS). At present, Amoco has completed the testing phase for selected prototype components and has completed a deepwater system design that incorporates many of these ideas. This program has yielded several configurations suitable for full-field development; however, the emphasis of the research and development program has been to identify, design, and test components of key subsystems. This first of a three-part series describes the design considerations, equipment configuration, and subsea trees.

  13. FEMP Best Practices and Lessons Learned for Federal Agency ESPC Projects: Preliminary Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5. PRELIMINARY ASSESSMENT (PA) 5.1 To get a useful PA from the ESCO, the agency should provide the ESCO with all relevant current information about the facilities, including energy consumption and previous audits. 5.2 The PA should be only as long as necessary to convey the viability of a project. An example/template of a PA can be found at: http://www1.eere.energy.gov/femp/docs/10_patemplate.docx . 5.3 Set deadlines for PA submission and for agency completion of PA review and response to the

  14. FEMP Best Practices and Lessons Learned for Federal Agency ESPC Projects: Task Order Request for Proposal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    . TASK ORDER REQUEST FOR PROPOSAL (TO-RFP) The TO incorporates the TO-RFP, the ESCO's IGA/proposal, and the IDIQ (the DOE indefinite- delivery, indefinite-quantity contract) - so the agency needs to know what all of them say. The purpose of the TO-RFP is to incorporate site-specific requirements into the TO by modifying, adding to, or deleting IDIQ contract terms, as long as these changes are within the overall scope of the IDIQ. 6.1 Use the FEMP TO-RFP Template, which lists all the DOE IDIQ

  15. EERE Success Story-FEMP Assists White House in Setting GHG Reduction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Target for Federal Government | Department of Energy Assists White House in Setting GHG Reduction Target for Federal Government EERE Success Story-FEMP Assists White House in Setting GHG Reduction Target for Federal Government July 21, 2015 - 12:02pm Addthis The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy) The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy)

  16. EERE Success Story-FEMP and U.S. Army Corps of Engineers Partner to Drive

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Down Federal Energy Costs | Department of Energy and U.S. Army Corps of Engineers Partner to Drive Down Federal Energy Costs EERE Success Story-FEMP and U.S. Army Corps of Engineers Partner to Drive Down Federal Energy Costs March 26, 2015 - 2:12pm Addthis With hundreds of thousands of facilities and vehicles spread across the globe, the United States government is one of the world's largest consumers of energy. The U.S. Army Corps of Engineers (USACE) and the U.S. Department of Energy's

  17. Pilot study risk assessment for selected problems at the Fernald Environmental Management Project (FEMP)

    SciTech Connect (OSTI)

    Hamilton, L.D.; Meinhold, A.F.; Baxter, S.L.; Holtzman, S.; Morris, S.C.; Pardi, R.; Rowe, M.D.; Sun, C.; Anspaugh, L.; Layton, D.

    1993-03-01

    Two important environmental problems at the USDOE Fernald Environmental Management Project (FEMP) facility in Fernald, Ohio were studied in this human health risk assessment. The problems studied were radon emissions from the K-65 waste silos, and offsite contamination of ground water with uranium. Waste from the processing of pitchblende ore is stored in the K-65 silos at the FEMP. Radium-226 in the waste decays to radon gas which escapes to the outside atmosphere. The concern is for an increase in lung cancer risk for nearby residents associated with radon exposure. Monitoring data and a gaussian plume transport model were used to develop a source term and predict exposure and risk to fenceline residents, residents within 1 and 5 miles of the silos, and residents of Hamilton and Cincinnati, Ohio. Two release scenarios were studied: the routine release of radon from the silos and an accidental loss of one silo dome integrity. Exposure parameters and risk factors were described as distributions. Risks associated with natural background radon concentrations were also estimated.

  18. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance

    SciTech Connect (OSTI)

    Robert P. Breckenridge; Thomas R. Wood

    2010-08-01

    The purpose of this document is to evaluate the opportunity for Letterkenny Army Depot (LEAD or the Depot) to utilize biogenic methane, which may be available in shale formations under the Depot, to provide a supplemental source of natural gas that could allow the Depot to increase energy independence. Both the Director and Deputy of Public Works at the Depot are supportive in general of a methane production project, but wanted to better understand the challenges prior to embarking on such a project. This report will cover many of these issues. A similar project has been successfully developed by the U. S. Army at Ft. Knox, KY, which will be explained and referred to throughout this report as a backdrop to discussing the challenges and opportunities at LEAD, because the geologic formations and possibilities at both sites are similar. Prior to discussing the opportunity at LEAD, it is important to briefly discuss the successful methane recovery operation at Ft. Knox, because it is applicable to the projected approach for the LEAD methane system. The Ft. Knox project is an excellent example of how the U. S. Army can use an onsite renewable resource to provide a secure energy source that is not dependent on regional energy networks and foreign oil. At Ft. Knox, the U. S. Army contracted (through a utility co-op) with an energy production company to drill wells, establish a distribution infrastructure, and provide the equipment needed to prepare and compress the produced methane gas for use by base operations. The energy production company agreed to conduct the exploratory investigation at Ft. Knox with no cost to the government, as long as they could be granted a long-term contract if a reliable energy resource was established. The Depot is located, in part, over an Ordovician Age shale formation that may have the potential for producing biogenic methane, similar to the Devonian Age shale found beneath Ft. Knox. However, the Ordovician Age Shale beneath the

  19. Mu2e production solenoid cryostat conceptual design

    SciTech Connect (OSTI)

    Nicol, T.H.; Kashikhin, V.V.; Page, T.M.; Peterson, T.J.; /Fermilab

    2011-06-01

    Mu2e is a muon-to-electron conversion experiment being designed by an international collaboration of more than 65 scientists and engineers from more than 20 research institutions for installation at Fermilab. The experiment is comprised of three large superconducting solenoid magnet systems, production solenoid (PS), transport solenoid (TS) and detector solenoid (DS). A 25 kW, 8 GeV proton beam strikes a target located in the PS creating muons from the decay of secondary particles. These muons are then focused in the PS and the resultant muon beam is transported through the TS towards the DS. The production solenoid presents a unique set of design challenges as the result of high radiation doses, stringent magnetic field requirements, and large structural forces. This paper describes the conceptual design of the PS cryostat and will include discussions of the vacuum vessel, thermal shield, multi-layer insulation, cooling system, cryogenic piping, and suspension system.

  20. Product Life-Cycle Management: The future of product and packaging design

    SciTech Connect (OSTI)

    Jung, L.B. )

    1993-01-01

    Product Life-Cycle Management (PLCM) is the control of environmental impacts associated with all the life phases of a product, from design through manufacture, packaging and disposal. PLCM dictates that products be manufactured using less harmful chemicals and fewer resources. Product packaging must be minimal and made of renewable and recyclable resources. Both the product and the package must contain recycled material. Packaging and products must also be collected for recycle at the end of their intended use, requiring infrastructure to collect, transport and process these materials. European legislation now requires the return and recycle of packaging materials by the end of 1993. Requirements are also being imposed on manufacturers of automobile related products; automotive batteries, tires and even automobiles themselves must now be accepted back and recycled. Increasing public concerns and awareness of environmental impacts plus the decreasing availability of natural resources will continue to push product life-cycle legislation forward.

  1. Switchable photosystem-II designer algae for photobiological hydrogen production

    DOE Patents [OSTI]

    Lee, James Weifu

    2010-01-05

    A switchable photosystem-II designer algae for photobiological hydrogen production. The designer transgenic algae includes at least two transgenes for enhanced photobiological H.sub.2 production wherein a first transgene serves as a genetic switch that can controls photosystem II (PSII) oxygen evolution and a second transgene encodes for creation of free proton channels in the algal photosynthetic membrane. In one embodiment, the algae includes a DNA construct having polymerase chain reaction forward primer (302), a inducible promoter (304), a PSII-iRNA sequence (306), a terminator (308), and a PCR reverse primer (310). In other embodiments, the PSII-iRNA sequence (306) is replaced with a CF.sub.1-iRNA sequence (312), a streptomycin-production gene (314), a targeting sequence (316) followed by a proton-channel producing gene (318), or a PSII-producing gene (320). In one embodiment, a photo-bioreactor and gas-product separation and utilization system produce photobiological H.sub.2 from the switchable PSII designer alga.

  2. Conceptual designs for commercial OTEC-ammonia product plantships

    SciTech Connect (OSTI)

    Richards, D.; Dugger, G.L.; Francis, E.J.

    1980-12-01

    The U.S. Department of Energy program plan for OTEC calls for design of pilot/demonstration plantships leading to commercial development for energy intensive product options as well as OTEC facilities for direct delivery of electric power to shore via undersea cables. The Applied Physics Laboratory (APL) has investigated alternative product options and their relative commercial viabilities since 1975, and has studied and developed proposed designs for OTEC plantships to produce significant amounts of energy products from the ocean in a reliable, environmentally acceptable, and cost effective manner, including resolution of some of the critical engineering design items through analysis and tests. This paper discusses some of this earlier work in its relation to the conceptual commercial plantship designs presented and describes the OTEC power systems and ammonia plant process requirements, including integration-operational aspects. Estimated OTEC power capacities and energy flow usage prospects are presented. Specific plantship layouts are discussed including construction and deployment, and projected costs versus market potentials are summarized.

  3. Covered Product Category: Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  4. Covered Product Category: Residential Geothermal Heat Pumps

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including geothermal heat pumps, which are an ENERGY STAR-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  5. Covered Product Category: Residential Central Air Conditioners

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including residential central air conditioners (CACs), which are an ENERGY STAR-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  6. Covered Product Category: Residential Gas Furnaces

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including residential gas furnaces, which are an ENERGY STAR-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  7. The FEMP Awards Program: Fostering Institutional Change and Energy Management Excellence

    SciTech Connect (OSTI)

    McDermott, Christa; Malone, Elizabeth L.

    2014-05-20

    This report assesses the use of institutional change principles and the institutional impact of award-winning projects through interviews with 22 Department of Energy Federal Energy Management Program (DOE FEMP) award winners. Award winners identified institutional facilitators and barriers in their projects and programs as well as factors in their implementation processes, thus providing information that can guide other efforts. We found that award winners do use strategies based on eight principles of institutional change, most frequently in terms of making changes to infrastructure, engaging leadership, and capitalizing on multiple motivations for making an energy efficiency improvement. The principles drawn on the least often were commitment and social empowerment. Award winners also faced five major types of obstacles that were institutional in nature: lack of resources, constraints of rules, psychological barriers, lack of information, and communication problems. We also used the seven categories of Energy Management Excellence (EME) as a lens to interpret the interview data and assess whether these categories relate to established institutional change principles. We found that the eight principles reflect strategies that have been found to be useful in improving energy efficiency in organizations, whereas the EME categories capture more of a blend of social contextual factors and strategies. The EME categories fill in some of the social context gaps that facilitate institutional change and energy management excellence, for example, personal persistence, a culture that supports creativity and innovation, regular engagement with tenants, contractors, and staff at all levels. Taking together the use of principles, EME criteria, and obstacles faced by interviewees, we make recommendations for how FEMP can better foster institutional change in federal agencies.

  8. Purchasing Energy-Efficient Commercial Boilers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Boilers Purchasing Energy-Efficient Commercial Boilers The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial boilers, a product category covered by FEMP-designated efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these programs and in any acquisition actions that are not specifically exempted by law. FEMP's acquisition guidance and

  9. Unbundling power products, modifying rate design, and fixed cost coverage

    SciTech Connect (OSTI)

    Procter, R.J.

    1996-03-01

    In this paper, the author provides an overview of efforts currently underway at the Bonneville Power Administration (BPA) to respond to these various challenges to how BPA has traditionally managed the marketing of power at the wholesale level in the Pacific Northwest and to areas outside this region along the West Cast in general. The paper begins with an overview of the role of the BPA in the region, and trends in costs and revenues. The paper provides a general outline of BPA`s efforts to separate its business into three separate product lines (power, energy services, and transmission) as well as providing an overview of how BPA is unbundling power products. In addition, the paper provides an overview of some of the major changes BPA has proposed in its rate design. This is followed by an overview of the approach to the issue of stranded cost. You will see that it is their desire to as much as possible avoid a legislative solution to this issue and rely on marketing and working with customers as a way of dealing with this very contentious issue. The paper wraps up with an assessment of the potential for power product unbundling to significantly reduce potential stranded costs. You will see that at the present time, unbundling power products offers BPA little in the way of substantial reductions in potential stranded costs. Whereas, margins on the delivery of energy and capacity offer the greatest potential for covering fixed costs.

  10. Advanced Turbine Systems (ATS) program conceptual design and product development

    SciTech Connect (OSTI)

    1996-08-31

    Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NO{sub x}, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coatings and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced Ge heavy-duty machine utilizing advanced cooling and enhancement in component efficiency. Both of these activities required the identification and resolution of technical issues critical to achieving ATS goals. The emphasis for the industrial ATS was placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS was placed on developing a technology base for advanced turbine cooling, while utilizing demonstrated and planned improvements in low emission combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE Power Systems is solely responsible for offering GE products for the industrial and utility markets.