Sample records for fees merchandise repairs

  1. Fees

    Broader source: Energy.gov [DOE]

    The DOE Loan Program is required to collect several fees from loan program Applicants. Please find an outline of these fees below. In addition, DOE is supported by outside consultants and legal...

  2. UMBC Code of Conduct for Logo Merchandise Licensees I. Introduction

    E-Print Network [OSTI]

    Adali, Tulay

    UMBC Code of Conduct for Logo Merchandise Licensees I. Introduction A. UMBC is committed licensed University logo merchandise are required to follow when they conduct business. D. Throughout

  3. General Merchandise 50% Energy Savings Technical Support Document

    SciTech Connect (OSTI)

    Hale, E.; Leach, M.; Hirsch, A.; Torcellini, P.

    2009-09-01T23:59:59.000Z

    This report documents technical analysis for medium-box general merchandise stores aimed at providing design guidance that achieves whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  4. Specification buying as it relates to private brand merchandising 

    E-Print Network [OSTI]

    Tarver, Cleo B

    1964-01-01T23:59:59.000Z

    , as it is used to develop private brand merchandise, has become a very powerful tool in the hands of the giant re- tail chains, How potent this tool can be, and the effeot it is presently having on the retailing structure of our eoonomy is an important... couldnst the retailer absorb tbo functions presently performed by the wholesalersV Some of the larger retailers' with adequate financial power, began to go directly to the manufacturers and specify the charao- teristics they desired in their particular...

  5. OC and LA-LB-SA Merchandise Exports December 2012 ii IEES, California State University Fullerton

    E-Print Network [OSTI]

    de Lijser, Peter

    #12;OC and LA-LB-SA Merchandise Exports December 2012 ii IEES, California State University Exports By Mira Farka, Ph.D. Adrian R. Fleissig, Ph.D. December 2012 California State University Fullerton © Institute for Economic and Environmental Studies (IEES) #12;OC and LA-LB-SA Merchandise Exports December

  6. OC and LA Metro Area Merchandise Exports August 2014 ii CEAF, California State University Fullerton

    E-Print Network [OSTI]

    de Lijser, Peter

    #12;OC and LA Metro Area Merchandise Exports August 2014 ii CEAF, California State University Exports By Mira Farka, Ph.D. Adrian R. Fleissig, Ph.D. August 2014 California State University Fullerton © Center for Economic Analysis and Forecasting (CEAF) #12;OC and LA Metro Area Merchandise Exports August

  7. Dissertation Submission Fee Chart (Fees effective 29 August 2011)

    E-Print Network [OSTI]

    Singh, Jaswinder Pal

    Dissertation Submission Fee Chart (Fees effective 29 August 2011) The fees that students dissertation maintenance fee to the Mudd Manuscript Library. Fees submitted online in the UMI ETDCard or American Express*. The $15 dissertation maintenance fee is paid at the Mudd Manuscript Library

  8. Student services fee The student services fee is distributed

    E-Print Network [OSTI]

    Amin, S. Massoud

    to services covered by the fee (health plan excluded). Regents Scholarship recipients and Senior CitizenStudent services fee The student services fee is distributed among various student programs/tuition_and_fees/student_ser- vice_fees.html). If you are enrolled for 6 or more credits, you must pay a student services fee of $368

  9. Miscellaneous Fees Associate Student

    E-Print Network [OSTI]

    Levi, Ran

    ). [Fees for the supervised MD and ChM will be at the standard part-time postgraduate rate] £900 Re

  10. MINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE

    E-Print Network [OSTI]

    Minnesota, University of

    Policy Center Oregon Road User Fee Pilot Program Other Interest: Nevada, Texas, Ohio, Idaho, etc. May Cellular Tower Data Warehouse May 24, 2012 6 #12;Determination of Mileage Fees · MBUF Rate StructureMINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE STRUCTURE CONCEPT 23rd Annual Transportation

  11. AWARD FEE PLAN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AWARD FEE PLAN FOR LAT A Environmental Services of Kentucky, LLC Paducah Remediation Contract DE-AC30-10CC40020 CONCUR: Rob Seifert, Paducah Re e iation Engineer and Deputy...

  12. Fee Title: Renewable Energy Fee Measure #: Measure 44

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Fee Title: Renewable Energy Fee Measure #: Measure 44 Ballot Information Shall the undergraduates and graduate students of UCSC amend Measure 28, the Renewable Energy fee passed in Spring 2006 as follows: The amendment would allow funds to be used for on-site renewables and energy efficiency projects

  13. Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    Fee Paid 1,514,656 Portage, Inc. DE-DT0002936 EM Contractor Fee Site: MOAB Uranium Mill Tailings - MOAB, UT Contract Name: MOAB Uranium Mill Tailings Remedial Action Contract...

  14. Undergraduate study Annual tuition fees

    E-Print Network [OSTI]

    Glasgow, University of

    's fees for undergraduate study. All fees are in £ sterling and may be subject to revision. For more programmes*** £13,000 Science, Engineering, Nursing and College of Medical, Veterinary and Life Sciences

  15. TRANSPORTATION SERVICES VEHICLE RENTAL FEES

    E-Print Network [OSTI]

    ENVIRONMENT FEES AIR CONDITIONER SERVICE $75.00 PARTS + 10% BATTERY CHARGE $25.00 BATTERY REPLACEMENT $25

  16. The University of North Carolina at Chapel Hill Student Fees

    E-Print Network [OSTI]

    Crews, Stephen

    Operating Expenses CHILD CARE SERVICES FEE h. Child Care Services RENEWABLE ENERGY FEE i. Renewable Energy

  17. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    LLC (UCOR) DE-SC-0004645 April 29, 2011 - July 13, 2016 Contract Number: Maximum Fee Cost Plus Award Fee 1,640,839,964 Fee Information Minimum Fee 0 EM Contractor Fee Site:...

  18. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    FY2011 FY2012 Fee Information Minimum Fee Maximum Fee September 2014 Contract Number: Cost Plus Incentive Fee Contractor: 3,260,603,765 Contract Period: EM Contractor Fee Site:...

  19. OCEAN SCIENCES CENTRE USER FEE DOCUMENT

    E-Print Network [OSTI]

    Oyet, Alwell

    ............................................................................................................ 4 2.2 Storage Fees.6 Cold Rooms support research programs of our Government and Industrial Partners The following user fee schedules

  20. Tuitioon & Fees Broc Bowling Gree

    E-Print Network [OSTI]

    Moore, Paul A.

    the outofstate surcharge. Tuition Rates by Campus Bowling Green State University offers programs from three 1001 Ea 132 Admin Bowling G 419 Bursa en State Unive ast Wooster S nistration Bui Green, OH. 4 bursar without advanced notice. Fees/Policies All tuition and fees are approved by Bowling Green State

  1. RIPPLE EFFECT MARKETING, is a Merchandising & Marketing company based in Oakville, Ontario with over 300 contract Merchandisers across the country servicing our clients year round. Not only does our

    E-Print Network [OSTI]

    RIPPLE EFFECT MARKETING, is a Merchandising & Marketing company based in Oakville, Ontario lbs) * Creative (displays with visual impact) DETAILERS (30-40 hours/week) * Planogram & retail ready clients products * Bring excitement & high energy to job. Some of the job responsibilities are.... · Build

  2. Mandatory Student Fees FY 2014 2015

    E-Print Network [OSTI]

    Maccabe, Barney

    Mandatory Student Fees FY 2014 ­ 2015 Mandatory Student Fees, as prescribed in UNM Policy 1310 to assess. The Board of Regents approves the final amount. Below is the annual budget detailing how these fees will be allocated. April 21, 2014 Budget (in dollars) STUDENT ACTIVITY FEES (assessed to all

  3. Sandia National Laboratories: User Fees for NSTTF Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FacilityUser Fees for NSTTF Capabilities User Fees for NSTTF Capabilities NSTTFpricing A site access fee is charged for all projects. The fee includes such things as office space,...

  4. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    Office - Oak Ridge, TN Contract Name: Transuranic Waste Processing Contract Sep-14 2,433,940 Cost Plus Award Fee 150,664,017 Fee Information Minimum Fee 2,039,246 Maximum Fee...

  5. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    Number: Contract Type: Contract Period: 0 Minimum Fee Maximum Fee Washington River Protection Solutions LLC DE-AC27-08RV14800 Cost Plus Award Fee 5,553,789,617 Fee Information...

  6. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Nancy Porter; Mike Sullivan; Chris Neary

    2003-05-01T23:59:59.000Z

    The two broad categories of deposited weld metal repair and fiber-reinforced composite repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repairs and for fiber-reinforced composite repair. To date, all of the experimental work pertaining to the evaluation of potential repair methods has focused on fiber-reinforced composite repairs. Hydrostatic testing was also conducted on four pipeline sections with simulated corrosion damage: two with composite liners and two without.

  7. CONCUR: AWARD FEE PLAN - FY15

    Office of Environmental Management (EM)

    (i) TABLE OF CONTENTS PAGE 1. INTRODUCTION 1 2. DEFINITION OF TERMS 1 3. ORGANIZATIONAL STRUCTURE 2 4. RESPONSIBILITIES 3 5. AWARD FEE AMOUNTS AND PERIODS 4 6. AWARD FEE...

  8. Strategies to Save 50% Site Energy in Grocery and General Merchandise Stores

    SciTech Connect (OSTI)

    Hirsch, A.; Hale, E.; Leach, M.

    2011-03-01T23:59:59.000Z

    This paper summarizes the methodology and main results of two recently published Technical Support Documents. These reports explore the feasibility of designing general merchandise and grocery stores that use half the energy of a minimally code-compliant building, as measured on a whole-building basis. We used an optimization algorithm to trace out a minimum cost curve and identify designs that satisfy the 50% energy savings goal. We started from baseline building energy use and progressed to more energy-efficient designs by sequentially adding energy design measures (EDMs). Certain EDMs figured prominently in reaching the 50% energy savings goal for both building types: (1) reduced lighting power density; (2) optimized area fraction and construction of view glass or skylights, or both, as part of a daylighting system tuned to 46.5 fc (500 lux); (3) reduced infiltration with a main entrance vestibule or an envelope air barrier, or both; and (4) energy recovery ventilators, especially in humid and cold climates. In grocery stores, the most effective EDM, which was chosen for all climates, was replacing baseline medium-temperature refrigerated cases with high-efficiency models that have doors.

  9. Rapid road repair vehicle

    DOE Patents [OSTI]

    Mara, Leo M. (Livermore, CA)

    1998-01-01T23:59:59.000Z

    Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find an the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was was heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past.

  10. Rapid road repair vehicle

    DOE Patents [OSTI]

    Mara, L.M.

    1998-05-05T23:59:59.000Z

    Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find at the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was not heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past. 2 figs.

  11. Tuitioon & Fees Broc Bowling Gree

    E-Print Network [OSTI]

    Moore, Paul A.

    are approved by Bowling Green State University's Board of Trustees and are subject to change, without notice the instructional fee plus the outofstate surcharge. Tuition Rates by Campus Bowling Green State University the Bowling Gree 1001 Ea 132 Admin Bowling 419 Bursa en State Unive ast Wooster S nistration Bui Green, OH 4

  12. Undergraduate study Annual tuition fees

    E-Print Network [OSTI]

    Glasgow, University of

    , Veterinary and Life Sciences programmes £17,250 MBChB, BDS and College of Medical, Veterinary and Life Sciences clinical programmes £31,250 Any exceptions to these fees appear on the following page. Students £910 110 credits £1,668 70 credits £1,062 119 credits** £1,805 *Minimum fundable credits by SAAS

  13. STUDENT SERVICES FEE ASSESSMENT REQUEST To elect to pay the Student Services Fee, fill out the form completely and return

    E-Print Network [OSTI]

    Amin, S. Massoud

    Health Benefit Plan. Contact Boynton Health Services at 612-625-8400 for further information. ProgramsSTUDENT SERVICES FEE ASSESSMENT REQUEST DIRECTIONS To elect to pay the Student Services Fee, fill the Student Services Fee, you may elect to pay the fee to use or support the services covered by the fee. You

  14. Total Estimated Contract Cost:) Performance Period Total Fee...

    Office of Environmental Management (EM)

    Washington Closure LLC DE-AC06-05RL14655 Contractor: Contract Number: Contract Type: Cost Plus Incentive Fee 2,366,753,325 Fee Information 0 Maximum Fee 319,511,699...

  15. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    0 Contractor: Bechtel National Inc. Contract Number: DE-AC27-01RV14136 Contract Type: Cost Plus Award Fee Maximum Fee* 595,123,540 Fee Available 102,622,325 10,714,819,974...

  16. UC Davis Student Services Fee (excludes Mental Health funds) Student Services and Fees Administrative Advisory Committee

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    UC Davis Student Services Fee (excludes Mental Health funds) Student Services and Fees Management Capital Projects 2 943,666.00$ (2,807.79)$ (946,473.79)$ -$ Child Care 45,325.16$ 144,957.08$ 99 and Institutional Analysis #12;UC Davis Student Services Fee (excludes Mental Health funds) Student Services

  17. Queens College Student Technology Fee Plan A Summary of the Plans for Student Technology Fee

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    ;Student Technology Fee Plan College: Queens College Recurring Cost: Instructional Resources MaintenanceQueens College Student Technology Fee Plan A Summary of the Plans for Student Technology Fee 2009-2010 Prepared by the Queens College Office of the Provost and Queens College Office of Converging Technologies

  18. AWARD FEE DETERMINATION SCORECARD Contractor: Restoration Services...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fee available or available amount of 52,456.20). o Adjective Rating: Very Good - Total of 44,762 earned. - Quality and Effectiveness of Performing Environment, Safety &...

  19. AWARD FEE DETERMINATION SCORECARD Contractor: Fluor B&W Portsmouth...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ranges Category of Performance Percentage Determination Award Fee Determination 1. Quality and Effectiveness in performing the DOE mission (17.5% of total subjective fee or...

  20. Policy Flash 2013-24 Fee Determinations: Requirement to Obtain...

    Office of Environmental Management (EM)

    Policy Flash 2013-24 Fee Determinations: Requirement to Obtain Acquisition Executive's Input Policy Flash 2013-24 Fee Determinations: Requirement to Obtain Acquisition Executive's...

  1. FISCAL YEAR 2014 AWARD FEE DETERMINATION SCORECARD Contractor...

    Office of Environmental Management (EM)

    project estimating. Performance Based Incentives Award Fee Performance Based Incentive Formula: 60% of total available fee (665,781 available). Base Performance Based Incentive...

  2. Water pollution Control Permit Fee Schedules (West Virginia)

    Broader source: Energy.gov [DOE]

    This rule establishes schedules of permit application fees and annual permit fees for state water pollution control permits and national pollutant discharge elimination system permits issued by the...

  3. Inland EmpIrE mErchandIsE Exports calIfornIa statE UnIvErsIty fUllErton

    E-Print Network [OSTI]

    de Lijser, Peter

    Inland EmpIrE mErchandIsE Exports calIfornIa statE UnIvErsIty fUllErton 20122012 CSUF Mihaylo University, Fullerton An Overview and Analysis of Inland Empire Exports #12;novEmbEr 2011 InstItUtE for EconomIc and EnvIronmEntal stUdIEs33 #12;Inland EmpIrE mErchandIsE Exports calIfornIa statE UnIvErsIty f

  4. Property Tax Fee-In-Lieu (Mississippi)

    Broader source: Energy.gov [DOE]

    The Property Tax Fee-In-Lieu allows for new or expansion projects in the state that have a private capital investment in excess of $100,000,000, a negotiated fee can be set that is paid in place of...

  5. FOIA FEES | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPowerHome |CookingFAQs FAQs Topics: ShuttleFEES FOIA

  6. TRANSPORTATION SERVICES VEHICLE RENTAL FEES

    E-Print Network [OSTI]

    ) $120.00 PARTS + 10% BRAKE SHOE REPLACEMENT (REAR) $180.00 PARTS + 10% ENGINE FLUSH $60.00 OIL CHANGE $60.00 QM HEAVY EQUIPMENT & OTHERS QM VEHICLES $250.00 SAFETY CHECK $20.00 TIRE SERVICE HEAVY EQUIPMENT TIRE SERVICE FLAT REPAIR $30.00 TIRE SERVICE REPLACEMENT

  7. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Bill Bruce; Nancy Porter; George Ritter; Matt Boring; Mark Lozev; Ian Harris; Bill Mohr; Dennis Harwig; Robin Gordon; Chris Neary; Mike Sullivan

    2005-07-20T23:59:59.000Z

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. In lieu of a field installation on an abandoned pipeline, a preliminary nondestructive testing protocol is being developed to determine the success or failure of the fiber-reinforced liner pipeline repairs. Optimization and validation activities for carbon-fiber repair methods are ongoing.

  8. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-12-31T23:59:59.000Z

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. The first round of optimization and validation activities for carbon-fiber repairs are complete. Development of a comprehensive test plan for this process is recommended for use in the field trial portion of this program.

  9. Nuclear Waste Fund fee adequacy: An assessment

    SciTech Connect (OSTI)

    NONE

    1990-11-01T23:59:59.000Z

    The purpose of this report is to present the Department of Energy`s (the Department) analysis of the adequacy of the 1.00 mill per kilowatt-hour (kWh) fee being paid by the utilities generating nuclear power for the permanent disposal of their spent nuclear fuel (SNF). In accordance with the Nuclear Waste Policy Act (NWPA), the SNF would be disposed of in a geologic repository to be developed by the Department. An annual analysis of the fee`s adequacy is required by the NWPA.

  10. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-08-17T23:59:59.000Z

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. Development of a comprehensive test plan for this process is recommended for use in the field trial portion of this program.

  11. fees

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian Nuclear Warheads|ofEventsWorkshopY-12a Multi-UsercrdfLASH 2011-66

  12. Rapid road repair vehicle

    DOE Patents [OSTI]

    Mara, Leo M. (Livermore, CA)

    1999-01-01T23:59:59.000Z

    Disclosed are improvments to a rapid road repair vehicle comprising an improved cleaning device arrangement, two dispensing arrays for filling defects more rapidly and efficiently, an array of pre-heaters to heat the road way surface in order to help the repair material better bond to the repaired surface, a means for detecting, measuring, and computing the number, location and volume of each of the detected surface imperfection, and a computer means schema for controlling the operation of the plurality of vehicle subsystems. The improved vehicle is, therefore, better able to perform its intended function of filling surface imperfections while moving over those surfaces at near normal traffic speeds.

  13. Arbitration Costs and Contingent Fee Contracts

    E-Print Network [OSTI]

    Drahozal, Christopher R.

    2005-08-03T23:59:59.000Z

    A common criticism of arbitration is that its upfront costs (arbitrators' fees and administrative costs) may preclude consumers and employees from asserting their claims. Some commentators have argued further that arbitration costs undercut...

  14. Underground Injection Control Fee Schedule (West Virginia)

    Broader source: Energy.gov [DOE]

    This rule establishes schedules of permit fees for state under?ground injection control permits issued by the Chief of the Office of Water Resources. This rule applies to any person who is...

  15. Solid Waste Assessment Fee Exemptions (West Virginia)

    Broader source: Energy.gov [DOE]

    A person who owns, operates, or leases an approved solid waste disposal facility is exempt from the payment of solid waste assessment fees, upon the receipt of a Certificate of Exemption from the...

  16. Sacramento Ordinance to Waive Solar PV Fees

    Broader source: Energy.gov [DOE]

    This is an ordinance by the city of Sacramento to suspend for the calendar years 2007-2009 all fees related to installation of photovoltaic systems on existing residences.

  17. Plant Diagnostic Clinic Services Offered & Fees

    E-Print Network [OSTI]

    Plant Diagnostic Clinic Services Offered & Fees Make the Most of a Beneficial Facility Visual without notice. Location Jefferson County Plant Diagnostic Clinic 15200 West 6th Avenue, Unit C Golden, CO

  18. City of Asheville- Building Permit Fee Waiver

    Broader source: Energy.gov [DOE]

    The City of Asheville waives fees for building permits and plan reviews for certain renewable energy technologies and green building certifications for homes and mixed-use commercial buildings....

  19. INTERNAL REPAIR OF PIPELINES

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; Nancy Porter; Mike Sullivan; Chris Neary

    2004-04-12T23:59:59.000Z

    The two broad categories of deposited weld metal repair and fiber-reinforced composite liner repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repair and for fiber-reinforced composite liner repair. Evaluation trials have been conducted using a modified fiber-reinforced composite liner provided by RolaTube and pipe sections without liners. All pipe section specimens failed in areas of simulated damage. Pipe sections containing fiber-reinforced composite liners failed at pressures marginally greater than the pipe sections without liners. The next step is to evaluate a liner material with a modulus of elasticity approximately 95% of the modulus of elasticity for steel. Preliminary welding parameters were developed for deposited weld metal repair in preparation of the receipt of Pacific Gas & Electric's internal pipeline welding repair system (that was designed specifically for 559 mm (22 in.) diameter pipe) and the receipt of 559 mm (22 in.) pipe sections from Panhandle Eastern. The next steps are to transfer welding parameters to the PG&E system and to pressure test repaired pipe sections to failure. A survey of pipeline operators was conducted to better understand the needs and performance requirements of the natural gas transmission industry regarding internal repair. Completed surveys contained the following principal conclusions: (1) Use of internal weld repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling (HDD) when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) Pipe diameter sizes range from 50.8 mm (2 in.) through 1,219.2 mm (48 in.). The most common size range for 80% to 90% of operators surveyed is 508 mm to 762 mm (20 in. to 30 in.), with 95% using 558.8 mm (22 in.) pipe. An evaluation of potential repair methods clearly indicates that the project should continue to focus on the development of a repair process involving the use of GMAW welding and on the development of a repair process involving the use of fiber-reinforced composite liners.

  20. OMB Control # 0648-0376 Expires 2/29/2012 Fee Collector's Name

    E-Print Network [OSTI]

    OMB Control # 0648-0376 Expires 2/29/2012 Fee Collector's Name Mailing Address City State Zip Phone BBGS-001WS 1.50 Total Fees ($) Fee Adjustment Instructions: 1. Complete the fee collector's name

  1. A computerized student fee system for Texas A&M University

    E-Print Network [OSTI]

    Wood, Lester Seth

    1972-01-01T23:59:59.000Z

    accounts for each student who has a scholarshi. p or contract. The fee summary card is used by the fee update program for recording the payment of fees or for revising a student's fee statement. ~0 eratin~ Procedures (l) Verify all fee rates contained... at A&ld which includes procedures for the collection and recording of student fee data, the calculation of student fees and t' he preparation of fee statements, the updating of student fees and the revision of fee statements, the distribution of fees...

  2. Does Abolishing Fees Reduce School Quality? Evidence from Kenya

    E-Print Network [OSTI]

    Oxford, University of

    Does Abolishing Fees Reduce School Quality? Evidence from Kenya Tessa Bold, Mwangi Kimenyi, Germano Mwabu and Justin Sandefur This Version: December 30, 2010 Abstract In 2003 Kenya abolished user fees

  3. DATA TRANSMISSION OPTIONS FOR VMT DATA AND FEE COLLECTION CENTERS

    E-Print Network [OSTI]

    Bertini, Robert L.

    , VMT fee, data processing, fuel tax alternatives, fee collection center, customer service center 18.59 kilometers squared km2 VOLUME VOLUME mL milliliters 0.034 fluid ounces fl oz fl oz fluid ounces 29

  4. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    Wastren-EnergX Mission Support LLC Contract Number: DE-CI0000004 Contract Type: Cost Plus Award Fee 128,879,762 Contract Period: December 2009 - July 2015 Fee Information...

  5. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    - September 2015 September 2014 Contractor: Contract Number: Contract Type: Idaho Treatment Group LLC DE-EM0001467 Cost Plus Award Fee Fee Information 444,161,295 Contract Period:...

  6. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    Cumulative Fee Paid 22,200,285 Wackenhut Services, Inc. DE-AC30-10CC60025 Contractor: Cost Plus Award Fee 989,000,000 Contract Period: Contract Type: January 2010 - December...

  7. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    & Wilcox Conversion Services, LLC Contract Number: DE-AC30-11CC40015 Contract Type: Cost Plus Award Fee Fee Available 4,324,912 408,822,369 Contract Period: December 2010 -...

  8. Permit Fees for Hazardous Waste Material Management (Connecticut)

    Broader source: Energy.gov [DOE]

    These regulations describe applicable fees for permit application, modification, and transfer for permits related to hazardous waste management.

  9. Subject: Fee Payment and Open Enrollment Hello from Queen's!

    E-Print Network [OSTI]

    Ellis, Randy

    of paying your fees by monthly deductions via a payment plan (PPL). The School of Graduate Studies, Graduate

  10. West Virginia University 1 Tuition, Fees and Residency

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    West Virginia University 1 Tuition, Fees and Residency Page Contents: · Residency Policy · Fee of adoption. Section 2: Classification for Admission and Fee Purposes 1. Students enrolling in a West Virginia status to another public institution in West Virginia. Section 3: Residence Determined by Domicile 1

  11. UCF TECHNOLOGY FEE GUIDELINES Academic Year 2013-2014

    E-Print Network [OSTI]

    Foroosh, Hassan

    UCF TECHNOLOGY FEE GUIDELINES Academic Year 2013-2014 The 2007 Florida Legislature amended Florida Statutes, Section 1009.24, to establish "a technology fee of up to 5 percent of the tuition per credit hour to enhance instructional technology resources for students and faculty." UCF TECHNOLOGY FEE COMMITTEE Revenue

  12. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    Fee Paid 127,390,991 Contract Number: Fee Available Contract Period: Contract Type: Cost Plus Award Fee 4,104,318,749 28,500,000 31,597,837 0 39,171,018 32,871,600 EM...

  13. Window Replacement, Rehabilitation, & Repair Guides - Building...

    Energy Savers [EERE]

    Window Replacement, Rehabilitation, & Repair Guides - Building America Top Innovation Window Replacement, Rehabilitation, & Repair Guides - Building America Top Innovation Effec...

  14. The MVR fee for all other states, US territories and provinces is as follows: State/Province Fee (USD) State/Province Fee (USD)

    E-Print Network [OSTI]

    Kirschner, Denise

    The MVR fee for all other states, US territories and provinces is as follows: State/Province Fee (USD) State/Province Fee (USD) Alabama $11.25 North Carolina $11.50 Alaska $8.50 North Dakota.50 Georgia $11.50 Tennessee $10.50 Hawaii $26.50 Texas $10.00 Idaho $12.50 Utah $12.50 Illinois

  15. West Virginia University 1 Tuition, Fees & Residency

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Year's Work The WVU Financial Aid Office provides an estimate of the total cost of attendance for an academic year at financialaid.wvu.edu/tuition-cost-information/ cost-of-attendance. This estimate includesWest Virginia University 1 Tuition, Fees & Residency In this section: Cost: · Cost of an Academic

  16. Avoided Gigawatts Through Utility Capital Recovery Fees

    E-Print Network [OSTI]

    Frosenfeld, A. N.; Verdict, M. E.

    1985-01-01T23:59:59.000Z

    structure is possible through the use of capital recovery fees for new electric meter hookups similar to those commonly used for new water and wastewater hookups where the developer/owner is required to capitalize the marginal cost of new demand. By giving...

  17. OMB Control # 0648-0376 Expires 2/29/2012 Fee Collector's Name

    E-Print Network [OSTI]

    OMB Control # 0648-0376 Expires 2/29/2012 Fee Collector's Name Mailing Address City State Zip Phone Number Fee Collector's Permit or Buyer Code Settlement Sheet Date Month and Year of Landings Contact the fee collector's name, address, telephone number, fee collector's permit number, date of this fee

  18. Collected LWA Engineering Memos from the Development of the Front End Electronics (FEE)

    E-Print Network [OSTI]

    Ellingson, Steven W.

    , LWA FEE Version 1.7, 2009 March 17 · FEE0023: Brian Hicks, Jacob Hartman, and Norman McGlothlin, Long and Bill of Materials, 2009 July 2 · FEE0024: Jacob Hartman and Brian Hicks, FEE0024: Linearity boards in the FEE subsystem never be required to bear any mechanical load. The unexpected failure

  19. Boise State University 2013-2014 Graduate Catalog 45 Tuition and Fees

    E-Print Network [OSTI]

    Barrash, Warren

    questions about Idaho residency requirements. Deadlines for Paying Tuition, Fees, and Other Charges YouBoise State University 2013-2014 Graduate Catalog 45 Tuition and Fees In general, the costs of attending Boise State University arise from tuition, institutional fees, and special fees (such as fees

  20. OLD DOMINION UNIVERSITY DENTAL HYGIENE CARE FACILITY 2011-2012 Fees

    E-Print Network [OSTI]

    OLD DOMINION UNIVERSITY DENTAL HYGIENE CARE FACILITY 2011-2012 Fees CLINIC FEES 1. Dental Hygiene of treatment, a new fee will be charged and the appointment will be treated as a re-care. Dental Hygiene

  1. Wealth Inequality in the “Land of the Fee”: A Conversation with Devin Fergus

    E-Print Network [OSTI]

    Reid, Carolina

    2013-01-01T23:59:59.000Z

    Research Center. Wealth Inequality in the “Land of the Fee”Wealth Inequality in the “Land of the Fee”: A Conversationand Osoro 2013). Wealth Inequality in the “Land of the Fee

  2. Green fees: Getting paid for getting it right -- Performance based fee contracts for new construction

    SciTech Connect (OSTI)

    Hubbard, G. [Rocky Mountain Inst., Snowmass, CO (United States). Green Development Services; Eley, C. [Eley Associates, San Francisco, CA (United States)

    1997-12-31T23:59:59.000Z

    Energy-efficient design in buildings today is too often the exception, rather than the rule. Building to code is not enough. That only means if the building was any worse, it would be illegal. The designers of exceptional buildings are showing that integrated design--architects, engineers, clients, and, ideally, contractors working closely together from the start--creates high performance buildings without additional capital cost, just increased design time. Agreement throughout the design profession shows that high performance buildings would be more prevalent if there were incentives to put the extra time into design integration. Rocky Mountain Institute (RMI) and Eley Associates are working to create Performance Based Fee contracts to demonstrate design incentive fees that can help architects, engineers, and building owners create extremely energy-efficient buildings. These fees will reward design professionals for what they save, not just for what they spend--thus aligning designers` interests with owners.

  3. FY 12 Award Fee Determination Scorecard Contractor: LATA Environmenta...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Effective of ESH&QA: Excellent Quality and Effective of Project Support: Very Good Quality and Effectiveness of Project Management: Good Base Fee Available: 40% of total...

  4. FY 13 Award Fee Determination Scorecard Contractor: LATA Environmenta...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Effective of ESH&QA: Excellent Quality and Effective of Project Support: Excellent Quality and Effectiveness of Project Management: Very Good Base Fee Available: 40% of...

  5. Sacramento Ordinance to Waive Fees for Solar Hot Water

    Broader source: Energy.gov [DOE]

    An ordinance suspending for the calendar years 2007-2009 all fees related to installations of solar water heaters on existing residences.

  6. Fees For Disposal Of Hazardous Waste Or Substances (Alabama)

    Broader source: Energy.gov [DOE]

    The article lists annual payments to be made to counties, restrictions on disposal of hazardous waste, additional fees collected by counties and penalties.

  7. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    Services & Testing Contract September 2014 Contractor: Contract Number: Contract Type: Advanced Technologies & Labs International Inc. DE-AC27-10RV15051 Cost Plus Award Fee...

  8. Gordon Fee, part 1 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Gordon Fee, part 1 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake Case...

  9. Gordon Fee, part 2 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Gordon Fee, part 2 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake Case...

  10. Industrial motor repair in the United States

    SciTech Connect (OSTI)

    Schueler, V.; Leistner, P.; Douglass, J.

    1994-09-01T23:59:59.000Z

    This report characterizes the motor repair industry in the United States; summarizes current motor repair and testing practice; and identifies barriers to energy motor repair practice and recommends strategies for overcoming those barriers.

  11. Facilities OperationsFacilities Operations Service Fee/Charge GuidelinesService Fee/Charge Guidelines

    E-Print Network [OSTI]

    Holsinger, Kent

    and all regional campuses ·· Repairs and preventive maintenance for buildingsRepairs and preventive charge) minor, corrective, preventive and statutory maintenance and related services for "academic. · Preventive Maintenance (PM) is maintenance which is carried out to prevent an item failing or wearing out

  12. Alumni & Development Office, Trinity Hall, Trinity Lane, Cambridge, CB2 1TJ | Tel: +44 (0)1223 765265 Fax: +44 (0) 1223 765157 | www.trinhall.cam.ac.uk | merchandise@trinhall.cam.ac.uk | Registered Charity number: 1137458

    E-Print Network [OSTI]

    Lasenby, Joan

    Alumni & Development Office, Trinity Hall, Trinity Lane, Cambridge, CB2 1TJ | Tel: +44 (0 Charity number: 1137458 TRINITY HALL MERCHANDISE ORDER FORM FOR PRINTS OF DRAWINGS BY COLIN HAYES (TH prints of the entire collection of Colin Hayes' series of sepia pen and wash drawings, Trinity Hall

  13. THE GRADUATE SCHOOL Graduate School Dissertation Processing Fees

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    THE GRADUATE SCHOOL Graduate School Dissertation Processing Fees Name: B#: Department: Date: Principal Advisor: Determine the processing fees associated with your dissertation below: Dissemination total dollar amt. of all items) NOTE: If your dissertation is over 3" thick, it may be broken into two

  14. Indifference fee rate for variable annuities Etienne CHEVALIER

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Introduced in the 1970s in the United States (see [22]), variable annuities are equity-linked contractsIndifference fee rate for variable annuities Etienne CHEVALIER Thomas LIM Ricardo ROMO ROMERO method for indifference fees. We focus on the guaranteed minimum death benefits and the guaranteed

  15. West Virginia University 1 Tuition, Fees, and Residency

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Financial Aid Office provides an estimate of the total cost of attendance for an academic year at financialaid.wvu.edu/tuition-cost-information/ cost-of-attendance . This estimate includes tuition and feesWest Virginia University 1 Tuition, Fees, and Residency Cost of an Academic Year's Work The WVU

  16. audit fees evidence: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    audit fees evidence First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Audit fees and book-tax differences...

  17. Performance Period Total Fee Paid FY2001

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked QuestionsDepartmentGas and| Department of Energy WindowProgram |ImproperFee

  18. Performance Period Total Fee Paid FY2008

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked QuestionsDepartmentGas and| Department of Energy WindowProgram |ImproperFee

  19. Animal Health Diagnostic Center Test and Fee Schedule Test Name Test Fee Discipline Test Days Lag** Samples Container Coolant Comments

    E-Print Network [OSTI]

    Keinan, Alon

    Animal Health Diagnostic Center Test and Fee Schedule Test Name Test Fee Discipline Test Days Lag** Samples Container Coolant Comments Equine Tests Equine Tests Acid Fast Stain (for bacteria) M-F 1-2 days 1 4 hours for equine. For more information, see Equine Cushing's Tests or AppendixC. For Equine only

  20. Mammalian DNA Repair. Final Report

    SciTech Connect (OSTI)

    None

    2003-01-24T23:59:59.000Z

    The Gordon Research Conference (GRC) on Mammalian DNA Repair was held at Harbortown Resort, Ventura Beach, CA. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  1. Inspect and Repair Steam Traps

    SciTech Connect (OSTI)

    Not Available

    2006-01-01T23:59:59.000Z

    This revised ITP tip sheet on inspecting and repairing steam traps provide how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  2. Fiscal year 1999 Battelle performance evaluation and fee agreement

    SciTech Connect (OSTI)

    DAVIS, T.L.

    1998-10-22T23:59:59.000Z

    Fiscal Year 1999 represents the third fill year utilizing a results-oriented, performance-based evaluation for the Contractor's operations and management of the DOE Pacific Northwest National Laboratory (here after referred to as the Laboratory). However, this is the first year that the Contractor's fee is totally performance-based utilizing the same Critical Outcomes. This document describes the critical outcomes, objectives, performance indicators, expected levels of performance, and the basis for the evaluation of the Contractor's performance for the period October 1, 1998 through September 30, 1999, as required by Clauses entitled ''Use of Objective Standards of Performance, Self Assessment and Performance Evaluation'' and ''Performance Measures Review'' of the Contract DE-ACO6-76RL01830. Furthermore, it documents the distribution of the total available performance-based fee and the methodology set for determining the amount of fee earned by the Contractor as stipulated within the causes entitled ''Estimated Cost and Annual Fee,'' ''Total Available Fee'' and ''Allowable Costs and Fee.'' In partnership with the Contractor and other key customers, the Department of Energy (DOE) Headquarters (HQ) and Richland Operations Office (RL) has defined four critical outcomes that serve as the core for the Contractor's performance-based evaluation and fee determination. The Contractor also utilizes these outcomes as a basis for overall management of the Laboratory.

  3. Requirements for Using and Administering Cost-plus-award-fee...

    Office of Environmental Management (EM)

    Federal Acquisition Regulation (FAR) required the following in using and administering a cost-plus-award-fee contract: 1. neither a firm-fixed-price nor a fixed-priced incentive...

  4. The Economics of Interchange Fees and Their Regulation: An Overview

    E-Print Network [OSTI]

    Evans, David

    2005-07-08T23:59:59.000Z

    This essay surveys the economic literature on interchange fees and the debate over whether interchange should be regulated and, if so, how. We consider, first, the operation of unitary payment systems, like American Express, ...

  5. Spent fuel management fee methodology and computer code user's manual.

    SciTech Connect (OSTI)

    Engel, R.L.; White, M.K.

    1982-01-01T23:59:59.000Z

    The methodology and computer model described here were developed to analyze the cash flows for the federal government taking title to and managing spent nuclear fuel. The methodology has been used by the US Department of Energy (DOE) to estimate the spent fuel disposal fee that will provide full cost recovery. Although the methodology was designed to analyze interim storage followed by spent fuel disposal, it could be used to calculate a fee for reprocessing spent fuel and disposing of the waste. The methodology consists of two phases. The first phase estimates government expenditures for spent fuel management. The second phase determines the fees that will result in revenues such that the government attains full cost recovery assuming various revenue collection philosophies. These two phases are discussed in detail in subsequent sections of this report. Each of the two phases constitute a computer module, called SPADE (SPent fuel Analysis and Disposal Economics) and FEAN (FEe ANalysis), respectively.

  6. SUMMARY OF FEE EARNED IN FY14.xlsx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    incentivized. * Metric 3 MAXIMUM FEE FOR METRIC 3 - 2,500,000 3.a Completion of the 220 preventive maintenance procedures by April 30, 2014 will earn the contractor 450,000....

  7. City of Philadelphia- Streamlined Solar Permitting and Fee Reduction

    Broader source: Energy.gov [DOE]

    Photovoltaic systems of 10 kW or less installed on 1- or 2-family residential units are eligible for streamlined permitting and a fee reduction. PV projects can use a [http://www.phila.gov/green...

  8. Small Business Administration (SBA) Guarantee Fee Tax Credit (Oklahoma)

    Broader source: Energy.gov [DOE]

    The Small Business Administration (SBA) Guarantee Fee Tax Credit allows for small businesses operating in Oklahoma to claim a credit against income tax liability. This credit may be claimed for tax...

  9. Verification of Motor Repair Quality

    E-Print Network [OSTI]

    Butler, K.

    Motor testing at Advanced Energy has shown that a motor that has not suffered irreparable damage as a result of failure can be repaired to perform as well as before the failure. But the only way to achieve the performance level of an energy...

  10. OMB Control # 0648-0376 Expires 2/29/2012 Fee Collector's Name

    E-Print Network [OSTI]

    OMB Control # 0648-0376 Expires 2/29/2012 Fee Collector's Name Mailing Address City State Zip Phone Verification: Instructions: 1. Complete the fee collector's name, address, phone number, crab receiver permit

  11. Fiscal Year 2007 Civilian Radioactive Waste Management Fee Adequacy Assessment Report

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy Office of Civilian Radioactive Waste Management Fee Adequacy Assessment Report is to present an analysis of the adequacy of the fee being paid by nuclear power utilities...

  12. The Gordon conference on mammalian DNA repair

    SciTech Connect (OSTI)

    Cleaver, J.E.; Smerdon, M.J.

    1993-12-31T23:59:59.000Z

    A brief overview of the Gordon Conference on Mammalian Repair held February 1-5, 1993 in Ventura, California is presented.

  13. West Virginia University 1 Tuition, Fees and Residency

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    West Virginia University 1 Tuition, Fees and Residency Page Contents: · Academic Common Market Academic Common Market West Virginia provides its residents the opportunity, through the Academic Common. The programs are restricted to West Virginia residents who have been accepted for admission to one

  14. Fees and Exemptions for students enrolled in Laurea Magistrale

    E-Print Network [OSTI]

    ' and PhD students' Services Area ­ Registrar's Office Service Last updated: 15 October 2013 #12;2 All1 Fees and Exemptions for students enrolled in Laurea Magistrale (equivalent to a Master of Science" The information contained in the Guides and provided through the online tools listed above is considered official

  15. Fees and Exemptions for students enrolled in Laurea Magistrale

    E-Print Network [OSTI]

    ' and PhD students' Services Area ­ Registrar's Office Service Last updated: 29 October 2013 #12;2 All1 Fees and Exemptions for students enrolled in Laurea Magistrale (equivalent to a Master of Science" The information contained in the Guides and provided through the online tools listed above is considered official

  16. West Virginia University 1 Tuition, Fees and Residency

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Year's Work The WVU Financial Aid Office provides an estimate of the total cost of attendance for an academic year at financialaid.wvu.edu/tuition-cost-information/ cost-of-attendance. This estimate includesWest Virginia University 1 Tuition, Fees and Residency In this section: Cost: · Cost of an Academic

  17. West Virginia University 1 Tuition, Fees and Residency

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    of an Academic Year's Work The WVU Financial Aid Office provides an estimate of the total cost of attendance for an academic year at financialaid.wvu.edu/tuition-cost-information/ cost-of-attendance. This estimate includesWest Virginia University 1 Tuition, Fees and Residency In this section: COST: · Cost of an Academic

  18. Equity Evaluation of Vehicle Miles Traveled Fees in Texas 

    E-Print Network [OSTI]

    Larsen, Lisa Kay

    2012-10-19T23:59:59.000Z

    to the infrastructure but the money needed to maintain and improve roadways is not being adequately generated. One proposed alternative to the gas tax is the creation of a vehicle miles traveled (VMT) fee; with equity being a crucial issue to consider. This research...

  19. Equity Evaluation of Vehicle Miles Traveled Fees in Texas

    E-Print Network [OSTI]

    Larsen, Lisa Kay

    2012-10-19T23:59:59.000Z

    to the infrastructure but the money needed to maintain and improve roadways is not being adequately generated. One proposed alternative to the gas tax is the creation of a vehicle miles traveled (VMT) fee; with equity being a crucial issue to consider. This research...

  20. Affordability Annual Tuition and Fees while attending the

    E-Print Network [OSTI]

    Almor, Amit

    increases **Students should expect additional costs including but not limited to: airfare to and from Hong Kong, local transportation, local cell phone plan, mainland China visa, and required group travel. premium apartment) Tuition and Fees while attending the first summer language training at the Yale-China

  1. DEVELOPMENT IMPACT FEE ADOPTION AND ITS EFFECTS IN TEXAS

    E-Print Network [OSTI]

    Ambs, Jonathan G.

    2010-01-20T23:59:59.000Z

    as the dependent variable and the second model looked at the total impact fee assed on new residential units as the dependent variable. Both models used the gross tax rate, debt per capita, change in city population as a percentage, city population, average price...

  2. Role of DNA repair protein ERCC1 in skin cancer 

    E-Print Network [OSTI]

    Song, Liang

    2009-01-01T23:59:59.000Z

    Nucleotide excision repair (NER) is one of the major repair systems for removal of DNA lesions. The NER pathway has evolved mainly to repair UV-induced DNA damage and is also active against a broad range of endogenously ...

  3. The feasibility of electrophoretic repair of impoundment leaks

    E-Print Network [OSTI]

    Han, Ji-Seok

    2002-01-01T23:59:59.000Z

    finding, repairing and testing the leaks, are tedious, expensive, and dangerous to workers. Electrophoretic repair technique is an innovative, economic, and safe method to repair the leakage of impoundments. A suspension of clay particles is induced...

  4. Automotive Repair by Number Theory Bart Snapp and Chris Snapp

    E-Print Network [OSTI]

    Snapp, Bart

    Automotive Repair by Number Theory Bart Snapp and Chris Snapp While repairing the ignition switch on a 1981 Fiat Spider, we discovered the following connection between number theory and automotive repair

  5. What are tuition fees for? Studying at a UK University means that you need to pay an annual fee for your

    E-Print Network [OSTI]

    Diggle, Peter J.

    ,500 £19,500 Business Administration MBA £26,000 £26,000 N/A N/A Business Management with Energy and Fuels for your tuition, which covers the costs associated with teaching, examinations, assessment and graduation fee is for the cost of the programme, not the fee per annum. How does Lancaster set overseas tuition

  6. INTERNAL REPAIR OF PIPELINES REVIEW & EVALUATION OF INTERNAL PIPELINE REPAIR TRIALS REPORT

    SciTech Connect (OSTI)

    Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

    2004-09-01T23:59:59.000Z

    The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is generally ineffective at restoring the pressure containing capabilities of pipelines. Failure pressure for pipe repaired with carbon fiber-reinforced composite liner was greater than that of the un-repaired pipe section with damage, indicating that this type of liner is effective at restoring the pressure containing capability of pipe. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. Development of a comprehensive test plan for this process is recommended for use in the next phase of this project.

  7. Developments advance subsea pipelaying, inspection, repair

    SciTech Connect (OSTI)

    NONE

    1997-09-15T23:59:59.000Z

    Recent advances in laying, inspecting, and repairing pipelines are helping to cut both costs and time. A new dredging system that employs jets to clear a subsea trench for pipelay received trials off Belgium last spring. Also, within the last year, projects in the Middle East and North Sea employed technologies that promise to make inspecting the surface of a subsea pipeline in difficult terrain easier, less time consuming, and therefore less costly. Plus, subsea repair of damaged pipelines may take less time with a new ``stabbable`` pipe connector. The paper describes jet dredging, inspection advance, support software, the North Sea site, and pipeline repair.

  8. Rules and Regulations Governing the Establishment of Various Fees (Rhode Island)

    Broader source: Energy.gov [DOE]

    These regulations describe the fees associated with several Department of Environmental Management regulatory programs, including programs pertaining to pollutant and wastewater discharge,...

  9. CATASTROPHIC REPAIR REQUEST CHECKLIST Office of Research

    E-Print Network [OSTI]

    Schladow, S. Geoffrey

    Not Meet Policy Not Sure Equipment may not be covered by a service contract that provides for repair Contacted: ______________ Amount of Annual Service Contract: $ ___________ Meets Policy Info Pending Does

  10. Reducing Your Leak Rate Without Repairing Leaks 

    E-Print Network [OSTI]

    Beals, C.

    2005-01-01T23:59:59.000Z

    As plant personnel know, repairing compressed air leaks can be an expensive, labor intensive and never-ending process. This article discusses ways plant personnel can reduce and maintain their leak rate at a lower level ...

  11. Vehicle Repair Policy Outline the policy regarding vehicle repair on University of Michigan (U-M) vehicles.

    E-Print Network [OSTI]

    Kirschner, Denise

    Vehicle Repair Policy Objective Outline the policy regarding vehicle repair on University of Michigan (U-M) vehicles. Policy 1. All vehicle repairs performed on U-M vehicles must be coordinated facility to repair their fleet vehicles. 2. U-M vehicles leased through Fleet Services include routine

  12. Energy and Technology Review: Unlocking the mysteries of DNA repair

    SciTech Connect (OSTI)

    Quirk, W.A.

    1993-04-01T23:59:59.000Z

    DNA, the genetic blueprint, has the remarkable property of encoding its own repair following diverse types of structural damage induced by external agents or normal metabolism. We are studying the interplay of DNA damaging agents, repair genes, and their protein products to decipher the complex biochemical pathways that mediate such repair. Our research focuses on repair processes that correct DNA damage produced by chemical mutagens and radiation, both ionizing and ultraviolet. The most important type of DNA repair in human cells is called excision repair. This multistep process removes damaged or inappropriate pieces of DNA -- often as a string of 29 nucleotides containing the damage -- and replaces them with intact ones. We have isolated, cloned, and mapped several human repair genes associated with the nucleotide excision repair pathway and involved in the repair of DNA damage after exposure to ultraviolet light or mutagens in cooked food. We have shown that a defect in one of these repair genes, ERCC2, is responsible for the repair deficiency in one of the groups of patients with the recessive genetic disorder xeroderma pigmentosum (XP group D). We are exploring ways to purify sufficient quantities (milligrams) of the protein products of these and other repair genes so that we can understand their functions. Our long-term goals are to link defective repair proteins to human DNA repair disorders that predispose to cancer, and to produce DNA-repair-deficient mice that can serve as models for the human disorders.

  13. For information on current fee levels, see: www.strath.ac.uk/registry/students/finance

    E-Print Network [OSTI]

    Mottram, Nigel

    Fees For information on current fee levels, see: www.strath.ac.uk/registry/students/finance How Enquiries can be made to either of the following in the Department of Accounting & Finance: Professor Dick Davies Course Director, Investment & Finance t: +44 (0)141 548 3710 e: jr.davies@strath.ac.uk Barbara

  14. Fees are subject to change. See studyguide.au.dk *PLACE OF STUDY

    E-Print Network [OSTI]

    on two areas: Renewable Energy, where stu- dents develop and apply technologies within renewable energyFees are subject to change. See studyguide.au.dk *PLACE OF STUDY Herning ANNUAL TUITION FEE EU/EEA/Swiss equips students to design the software and electronics of the future ­ to design energy-friendly systems

  15. UNIVERSITY OF NEVADA, LAS VEGAS DIFFERENTIAL FEE PROPOSAL FOR UNLV PHYSICAL THERAPY

    E-Print Network [OSTI]

    Hemmers, Oliver

    Course Fee PT - Doctoral. $450 450 $0 PT - Materials Fee $250 250 $0 DPT 730 $50 $0 $50 DPT 741 $50 $0 $50 DPT 744 $450 $0 $450 DPT 745 $450 $0 $450 DPT 750 $75 $0 $75 DPT 752 $50 $0 $50 DPT 753 Course

  16. Fees are subject to change. See studyguide.au.dk *PLACE OF STUDY

    E-Print Network [OSTI]

    .au.dk/agrobiology Climate change and population growth pose a huge, multifaceted, worldwide challenge to agriculturalFees are subject to change. See studyguide.au.dk *PLACE OF STUDY Aarhus ANNUAL TUITION FEE EU, and organic agriculture ­ and tailor their degree with elective courses on top of the mandatory courses

  17. Tuition & Fee Installment Payment Plans -$25 non-refundable Enrollment Fee per plan applies and is due at the time of enrollment.

    E-Print Network [OSTI]

    a checking/savings account or from a credit card (a convenience fee applies for all credit card transactions that they save this under their favorites. The link is also located on the CSM Accounts

  18. Contractor Fee Payments - Savannah River Site Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave theJuly 30, 2013 Sanyo: NoticeContinuingFinancingContractor Fee

  19. Oregon Fees for Underground Injection Control Program Fact Sheet | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:Energy Information Fees for Underground Injection Control Program

  20. Oregon Stormwater Permit Application Forms and Permit Fees Website | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:Energy Information FeesInformation Section 401StateEnergy

  1. Oregon Underground Injection Control Registration Application Fees (DEQ

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:Energy Information FeesInformation SectionInformationForm

  2. Alternative Fuels Data Center: State Fees as Transportation Funding

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWP RelatedCellulaseFuelsConversions toSchoolAlternatives Fees as

  3. HYDROGEN EFFECTS ON LASER ENGINEERED NET SHAPE (LENS) REPAIRED WELDMENTS

    SciTech Connect (OSTI)

    Korinko, P; Thad Adams, T

    2006-10-06T23:59:59.000Z

    New methods of repairing mis-machined components are always of interest. In this study, an innovative method using Laser Engineered Net Shape{trademark} (LENS{reg_sign}) forming was used to repair intentionally mis-machined test articles. The components were repaired and subsequently hydrogen charged and burst tested. The LENS repair did not have an adverse effect on the solid state weld process that was used to repair the components. Hydrogen charged samples failed in a similar manner to the uncharged samples. Overall, the prospects for LENS repairing similar products are favorable and further work is encouraged.

  4. Advance disposal fees and recycling: Partners or foes?

    SciTech Connect (OSTI)

    Woods, R.

    1995-05-01T23:59:59.000Z

    A political trend of shifting government responsibilities from the federal to the state and local level is beginning to take hold in many municipalities this year. Evidence of this shift recently was codified by the passage of Congress`s unfunded mandates bills, which require a panel review of any federal government mandates that create a cost burden of at least $50 million on state and local government. Expecting to be freed from the yoke of the most costly unfunded federal laws, many states are taking a second look at their expensive recycling laws and considering reassessment of how funding mechanisms are structured. This search for ways to raise revenue has renewed the continuing debate over advance disposal fees (ADFs), which are included in the cost of a product to pay for its ultimate disposal or reuse. These ADFs have been used for several years in a majority of US states to help handle scrap tire disposal. Due to concern over fire hazards posed by the nation`s growing scrap tire piles, several states have implemented a $1--$2 fee on each tire to help pay for disposal, most of which have been reasonably successful.

  5. Repairable chip bonding/interconnect process

    DOE Patents [OSTI]

    Bernhardt, Anthony F. (Berkeley, CA); Contolini, Robert J. (Livermore, CA); Malba, Vincent (Livermore, CA); Riddle, Robert A. (Tracy, CA)

    1997-01-01T23:59:59.000Z

    A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder.

  6. Repairable chip bonding/interconnect process

    DOE Patents [OSTI]

    Bernhardt, A.F.; Contolini, R.J.; Malba, V.; Riddle, R.A.

    1997-08-05T23:59:59.000Z

    A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules is disclosed. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder. 10 figs.

  7. SNL Researchers Assess Wind Turbine Blade Inspection and Repair...

    Office of Environmental Management (EM)

    Researchers Assess Wind Turbine Blade Inspection and Repair Methods SNL Researchers Assess Wind Turbine Blade Inspection and Repair Methods May 18, 2015 - 5:32pm Addthis A picture...

  8. Phonemic Categorization and Phonotactic Repair as Parallel Sublexical Processes 

    E-Print Network [OSTI]

    Ishikawa, Kiyoshi

    2014-07-01T23:59:59.000Z

    categorization and phonotactic repair are sublexical and simultaneous; phonotactic repairs themselves depend on coarticulation cues. Such models can be implemented in two different versions: suprasegmental matching, according to which a speech signal is matched...

  9. Development of a composite repair system for reinforcing offshore risers

    E-Print Network [OSTI]

    Alexander, Christopher Richard

    2009-05-15T23:59:59.000Z

    A research program was conducted to investigate the application of composite materials in repairing corroded offshore risers, leading to the development of an optimized repair using a hybrid carbon/E-glass system. The objective of this research...

  10. Repairing Type Errors in Functional Programs 

    E-Print Network [OSTI]

    McAdam, Bruce J

    Type systems for programming languages can be used by compilers to reject programs which are found to be unsound and which may, therefore, fail to execute successfully. When a program is rejected the programmer must repair it so that it can be type...

  11. An emergency response team for membrane repair

    E-Print Network [OSTI]

    Kirchhausen, Tomas

    events, which we focus on here. As discussed later, Ca2+ influx at the site of plasma membrane-fusion events are required to repair a torn plasma membrane, and we propose that this emergency products and the plasma membrane. Reseal or die. Plasma-membrane disruption is a normal event in the life

  12. EPA Lead Safety for Renovation, Repair and

    E-Print Network [OSTI]

    Tennessee, University of

    EPA Lead Safety for Renovation, Repair and Painting (RRP) Course Certified Renovators Class, CSP, CHMM, Certified Lead Paint Inspector.; Certified Renovator; EPA Ac- credited Lead RRP trainer or fax registratio Registration Form Cash Method of Payment Check Name Mailing Address Phone Lead Safety

  13. Visualization of Mismatch Repair in Bacterial Cells

    E-Print Network [OSTI]

    Smith, Bradley T.

    We determined the localizations of mismatch repair proteins in living Bacillus subtilis cells. MutS-GFP colocalized with the chromosome in all cells and formed foci in a subset of cells. MutL-GFP formed foci in a subset ...

  14. Regulation of DNA repair by parkin

    SciTech Connect (OSTI)

    Kao, Shyan-Yuan, E-mail: shyan-yuan_kao@meei.harvard.edu [Eaton Peabody Laboratory, Massachusetts Eye and Ear Infirmary, 243 Charles Street, Boston, MA 02114 (United States)] [Eaton Peabody Laboratory, Massachusetts Eye and Ear Infirmary, 243 Charles Street, Boston, MA 02114 (United States)

    2009-05-01T23:59:59.000Z

    Mutation of parkin is one of the most prevalent causes of autosomal recessive Parkinson's disease (PD). Parkin is an E3 ubiquitin ligase that acts on a variety of substrates, resulting in polyubiquitination and degradation by the proteasome or monoubiquitination and regulation of biological activity. However, the cellular functions of parkin that relate to its pathological involvement in PD are not well understood. Here we show that parkin is essential for optimal repair of DNA damage. Parkin-deficient cells exhibit reduced DNA excision repair that can be restored by transfection of wild-type parkin, but not by transfection of a pathological parkin mutant. Parkin also protects against DNA damage-induced cell death, an activity that is largely lost in the pathological mutant. Moreover, parkin interacts with the proliferating cell nuclear antigen (PCNA), a protein that coordinates DNA excision repair. These results suggest that parkin promotes DNA repair and protects against genotoxicity, and implicate DNA damage as a potential pathogenic mechanism in PD.

  15. Antibody specific for a DNA repair protein

    DOE Patents [OSTI]

    Petrini, John H.; Morgan, William Francis; Maser, Richard Scott; Carney, James Patrick

    2006-07-11T23:59:59.000Z

    An isolated and purified DNA molecule encoding a DNA repair protein, p95, is provided, as is isolated and purified p95. Also provided are methods of detecting p95 and DNA encoding p95. The invention further provides p95 knock-out mice.

  16. DNA encoding a DNA repair protein

    DOE Patents [OSTI]

    Petrini, John H.; Morgan, William Francis; Maser, Richard Scott; Carney, James Patrick

    2006-08-15T23:59:59.000Z

    An isolated and purified DNA molecule encoding a DNA repair protein, p95, is provided, as is isolated and purified p95. Also provided are methods of detecting p95 and DNA encoding p95. The invention further provides p95 knock-out mice.

  17. Method for mask repair using defect compensation

    DOE Patents [OSTI]

    Sweeney, Donald W. (San Ramon, CA); Ray-Chaudhuri, Avijit K. (Livermore, CA)

    2001-01-01T23:59:59.000Z

    A method for repair of amplitude and/or phase defects in lithographic masks. The method involves modifying or altering a portion of the absorber pattern on the surface of the mask blank proximate to the mask defect to compensate for the local disturbance (amplitude or phase) of the optical field due to the defect.

  18. Laboratory testing of closure cap repair techniques

    SciTech Connect (OSTI)

    Persoff, P.; Moridis, G. [Lawrence Berkeley National Lab., CA (United States); Tuck, D.M. [Westinghouse Savannah River Company, Aiken, SC (United States)] [and others

    1996-10-01T23:59:59.000Z

    Landfill design requires a low permeability closure cap as well as a low permeability liner. The Savannah River Site, in South Carolina, has approximately 85 acres of mixed waste landfills covered with compacted kaolin clay. Maintaining low permeability of the clay cap requires both that the permeability of the compacted clay itself remain low and that the integrity of the barrier be maintained. Barrier breaches typically result from penetration by roots or animals, and especially cracks caused by uneven settling or desiccation. In this study, clay layers, 0.81 m in diameter and 7.6 cm thick, were compacted in 7 lysimeters to simulate closure caps. The hydraulic conductivity of each layer was measured, and the compacted clay layers (CCL`s) were cracked by drying. Then various repair techniques were applied and the effectiveness of each repair was assessed by remeasuring the hydraulic conductivity. Finally the repaired CCL was again dried and measured to determine how the repair responded to the conditions that caused the original failure. For a full report of this investigation see Persoff et al. Six repair techniques have been tested, four of which involve the use of injectable barrier liquids colloidal silica (CS) and polysiloxane (PSX) described below: (I) covering the crack with a bentonite geosynthetic clay liner (GCL), (ii) recompaction of new kaolinite at STD+3 moisture content joined to existing kaolinite that had dried and shrunk, (iii) direct injection of colloidal silica to a crack, (iv) injection of colloidal silica (CS) to wells in an overlying sand layer, (v) direct injection of polysiloxane to a crack, and (vi), injection of polysiloxane (PSX) to wells in an overlying soil layer.

  19. GC Commits to Transparency on Nuclear Waste Fund Fee Adequacy Decisions

    Broader source: Energy.gov [DOE]

    Consistent with the Administration's commitment to transparency, DOE General Counsel Scott Blake Harris has decided that all future determinations as to the adequacy of the Nuclear Waste Fund fee...

  20. Local Option- Building Permit Fee Waivers for Renewable Energy Projects (Connecticut)

    Broader source: Energy.gov [DOE]

    As of July 2011, Connecticut authorizes municipalities to pass a local ordinance to exempt "Class I" renewable energy projects from paying building permit fees. Class I renewable energy projects...

  1. Coordinated Fee Structure for Developed Recreation Sites on the Ashley, Uinta, and Wasatch-Cache

    E-Print Network [OSTI]

    Standiford, Richard B.

    Federal and State agencies and private campgrounds in geographical areas of concern to determine fee, such as water, sewer, electricity and recreational equipment/infrastructure. 1 An abbreviated version

  2. 16 TAC, part 1, chapter 3, rule 3.78 Fees and Financial Security...

    Open Energy Info (EERE)

    Fees and Financial Security Requirements Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 16 TAC, part 1, chapter 3, rule...

  3. Tuition and Fees Your education is an investment that can lead to new professional opportunities, personal

    E-Print Network [OSTI]

    Vertes, Akos

    Tuition and Fees Your education is an investment that can lead to new professional opportunities,485 per credit hour*** Cost of books is not included in the course tuition. Specific details

  4. City of Santa Monica- Building Permit Fee Waiver for Solar Projects

    Broader source: Energy.gov [DOE]

    In early 2002, the City of Santa Monica began waiving building permit fees for solar energy systems. In December 2008, after months of working with industry trainers, solar contractors and staff...

  5. FY 12 Award Fee Determination Scorecard Contractor: B&W Conversion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Award Fee The first PBI was based on the state of readiness of the Paducah and Piketon Depleted Uranium Hexafluoride (DUF 6 ) conversion plants as of September 30, 2011. BWCS...

  6. Comprehensive Equity Analysis of Mileage Based User Fees: Tazation and Expenditures for Roadways and Transit

    E-Print Network [OSTI]

    Carlton, Justin David

    2014-01-07T23:59:59.000Z

    Lack of sustainable revenue generation for transportation infrastructure has created a need for alternative funding sources. The most prominent of which is the Mileage Based User Fee (MBUF), where drivers would be charged based on the number...

  7. Helium bubble distributions in reactor tank repair specimens

    SciTech Connect (OSTI)

    Tosten, M.H.; Kestin, P.A.

    1992-03-01T23:59:59.000Z

    This report discusses the Reactor Tank Repair (RTR) program was initiated to develop an in-tank repair process capable of repairing stress corrosion cracks within the SRS reactor tank walls, in the event that such a repair is needed. Previous attempts to repair C-reactor tank with a gas tungsten arc (GTA) welding process were unsuccessful due to significant cracking that occurred in the heat-affected-zones adjacent to the repair welds. It was determined that this additional cracking was a result of helium embrittlement caused by the combined effects of helium (existing within the tank walls), the high heat input associated with the GTA process, and weld shrinkage stresses. Based on the results of earlier studies it was suggested that the effects of helium embrittlement could be minimized by using a low heat input GMA process. Metallographic analysis played an important role throughout the investigation of alternative welding methods for the repair of helium-containing materials.

  8. [Type text] 2012 Higher Education Units and Fees (version 1) October 2011 Page 1

    E-Print Network [OSTI]

    EDUCATION UNITS AND FEES UNIT CODE UNIT TITLE CreditPts EFTSL UnitFeefor 2012/11/10CSP UnitFeeforpre- 2010CSP UnitFeeforpre- 2009CSP UnitFeeforpre- 2008CSP FullTuitionFees fornon-CSP ACH400 RESEARCHFeefor 2012/11/10CSP UnitFeeforpre- 2010CSP UnitFeeforpre- 2009CSP UnitFeeforpre- 2008CSP Full

  9. NOTES FOR TUITION AND FEES 2012-2013 Rates include mandatory fees. Students taking all of their courses at off-campus locations (including distance

    E-Print Network [OSTI]

    MacAdam, Keith

    approved by the College of Medicine Student Progress and Promotion Committee to take a reduced curriculum hours) will be assessed on a per-credit hour basis. AnnualFull-TimeFee The annual rates for Medicine-13 totaling $1,241. College of Medicine (Annual Charges) Beginning with Fall 2007, the College of Medicine

  10. Rules and Regulations Pertaining to a User Fee System for Point Source Dischargers that Discharge Pollutants into the Waters of the State (Rhode Island)

    Broader source: Energy.gov [DOE]

    These regulations establish a user fee system for point source dischargers that discharge pollutants into the surface waters of the State. The funds from such fees are used by the Department of...

  11. DNA repair is the target of novel antibiotics

    E-Print Network [OSTI]

    Gunderson, Carl Wayne

    2007-01-01T23:59:59.000Z

    W. & A. M. Segall, (2006) DNA repair, a novel antibacterialjunction-trapping peptides induce DNA damage and chromosomePeptide inhibitors of DNA cleavage by tyrosine recombinases

  12. U.S. Department of Energy Office of Inspector General report on inspection of Westinghouse Savannah River Company fees for managing and operating the Savannah River Site

    SciTech Connect (OSTI)

    NONE

    1995-08-03T23:59:59.000Z

    During the first five years of its contract with the Department of Energy, Westinghouse Savannah River Company was paid over $130 million in fees to manage and operate the Savannah River Site. Fees paid to Westinghouse steadily increased over the five year period. For example, fees paid for the last six months of this five year period were over three times as large as fees paid for the first six months. The purpose of this inspection was to review the Department`s annual negotiation of total available fees with Westinghouse, and to examine the reasons for the growth in fees over this five year period. The review disclosed that, after Fiscal Year 1989, the Department used an increasing number of fee bases in calculating Westinghouse Savannah River Company`s fixed-fee-equivalents from the maximum fee schedules within the Department of Energy Acquisition Regulation. The authors found that the Department had significantly increased the percentage of the dollar value of subcontracts being placed in Westinghouse`s fee bases for fee calculation purposes. They found that the Department had effectively increased Westinghouse`s fixed-fee-equivalents by approximately $3 million in both Fiscal Year 1993 and 1994 to, in large part, fund an unallowable employee incentive compensation program. They found that Westinghouse`s total paid fees for the five year period increased significantly over what they would have been had the terms resulting from the original competitive negotiations been maintained. The authors recommended that the Deputy Assist Secretary for Procurement and Assistance Management require that changes in either the number or composition of fee bases used in calculating fees from the maximum fee schedules be submitted to the Department`s Procurement Executive for approval.

  13. Motor Repair Tech Brief | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil &315_ArnibanPriorityof EnergyDepartmentRepair Tech Brief Motor

  14. EIR Charging Policy The University can charge a fee for the provision of information requested under the Environmental

    E-Print Network [OSTI]

    Glasgow, University of

    under the Environmental Information (Scotland) Regulations 2004. This policy is the UniversityEIR Charging Policy The University can charge a fee for the provision of information requested policy, the University will process the first £100 free of charge. Above the £100 threshold, fees

  15. Statistics Fees Scholarship R E G U L A T I O N S F O R 2 0 1 4

    E-Print Network [OSTI]

    Waikato, University of

    Statistics Fees Scholarship R E G U L A T I O N S F O R 2 0 1 4 BACKGROUND These Scholarships were will be known as the Statistics Fees Scholarships. 2. The Scholarship will have a value of up to $2. 4. The Statistics Fees Scholarship is open to applicants who are enrolling in the second or third

  16. Coherent testing and simulation of composite blade repair

    E-Print Network [OSTI]

    McNichols, Brian Glenn

    1997-01-01T23:59:59.000Z

    The objective of this research program is to experimentally and computationally determine the static and fatigue response for two methods of repair to an E/Glass-Epoxy sandwich laminate. The proposed methods of repair are a scarf and overlap patch...

  17. Computational model of aortic valve surgical repair using grafted pericardium

    E-Print Network [OSTI]

    1 Computational model of aortic valve surgical repair using grafted pericardium Peter E. Hammer1, aortic valve repair, membrane, surgical planning, leaflet graft, pericardium ABSTRACT Aortic valve leaflets. Difficulty is largely due to the complex geometry and function of the valve and the lower

  18. Quality electric motor repair: A guidebook for electric utilities

    SciTech Connect (OSTI)

    Schueler, V.; Douglass, J.

    1995-08-01T23:59:59.000Z

    This guidebook provides utilities with a resource for better understanding and developing their roles in relation to electric motor repair shops and the industrial and commercial utility customers that use them. The guidebook includes information and tools that utilities can use to raise the quality of electric motor repair practices in their service territories.

  19. Effect of Proposed Port User Fees on Export Grain Flow Patterns.

    E-Print Network [OSTI]

    Viscencio-Brambila, Hector; Fuller, Stephen W.

    1987-01-01T23:59:59.000Z

    and the resulting user fee is proj ected to redirect nearly 160 million bushels of corn and soybeans from this port area. This grain is redirected to Mississippi River ports which are projected to increase export volume by 248 million bushels. A portion..., and North Atlantic port areas. The Mississippi River port area is the most impor tant grain outlet in the nation, accounting for up to 40 percent of U.S. agriculture's grain exports. Depend ing on the user fee scenario analyzed, increases in export...

  20. !Y-Y-2000062! J:\\Registration,Readmits,Spec. programs\\Data (Forms, Reports, Etc.)\\Registrar Forms and Petitions\\Word Docs\\Partial Fee Reduction_Barcoded.doc

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    and Petitions\\Word Docs\\Partial Fee Reduction_Barcoded.doc Revised 5/26/2011 SS REQUEST FOR PARTIAL FEE Educational Fee and must be submitted to the Office of the Registrar. A petition for a deficit load should to a complete withdraw from the University. 2. Approval for partial fee reduction is not automatic. To qualify

  1. Using instrument scraper surveys for corrosion repair

    SciTech Connect (OSTI)

    Akhnoukh, S.R.; Baghabrah, M.A. (Aramco (SA))

    1990-07-01T23:59:59.000Z

    This paper reports on a program for overall pipe line repair. This program was implemented to maintain pipe line integrity and for identifying problem areas which require reconditioning or replacing by: reviewing pipe line leak history; checking periodically lifetime expectancy and integrity of pipe coatings; using cathodic protection annual survey results to locate low potential areas (close-interval survey is needed to identify the exact location of corrosion); and hydrotesting the pipe line (using leaks or ruptures from the hydrotest to identify problem areas). The pipe line revalidation plan is insufficient for identifying pipe line leaks. Instrumented pig testing provides more accurate and reliable ways of testing the pipe line for internal or external corrosion or defects.

  2. Office of Inspector General report on audit of Department of Energy management and operating contractor available fees

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    The Office of Procurement and Assistance Management has proposed changes to the method used to annually calculate and negotiate ``for profit`` management and operating contractor available fees. This proposal will increase contractor fees in exchange for the contractor`s purported assumption of additional risk. In 1991, the Department, through the Accountability Rule, increased contractor fees as an incentive to improve contractor performance and accountability. Despite the lack of measurable benefits of this effort, the Department is crafting a new fee policy which will, depending upon how it is executed, increase fees above the amount provided through the Accountability Rule as an incentive to the Department`s management and operating contractors. The objective of the audit was to determine whether the Department`s proposed change to the fee structure for determining management and operating contractor fees will be cost effective. This report describes the study`s approach, its findings and recommendations, management and auditor comments, and includes appendices with further data.

  3. INTRAMURALSSpring Team Sports* Registration accepted for teams or "free agent" individuals. $25 registration fee required

    E-Print Network [OSTI]

    Lawrence, Rick L.

    INTRAMURALSSpring Team Sports* Registration accepted for teams or "free agent" individuals. $25 registration fee required for all teams: due upon team registration online. (Refundable if no games the team manager via email or text message (through the website). Call the Equipment Room at 994

  4. INTRAMURALSFall Team Sports* Registration accepted for teams or "free agent" individuals. $25 registration fee required

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    INTRAMURALSFall Team Sports* Registration accepted for teams or "free agent" individuals. $25 registration fee required for all teams: due upon team registration online. (Refundable if no games the team manager via email or text message (through the website). Call the Equipment Room at 994

  5. INTRAMURALSSummer Team Sports* Registration accepted for teams or "free agent" individuals. $25 registration fee required

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    INTRAMURALSSummer Team Sports* Registration accepted for teams or "free agent" individuals. $25 registration fee required for all teams: due upon team registration online. (Refundable if no games the team manager via email or text message. Recreational Sports & Fitness 120 Marga Hosaeus Fitness Center

  6. Boston University User Fee Structure for ICP-ES, ICP-MS and Laser Labs

    E-Print Network [OSTI]

    Hutyra, Lucy R.

    Cost per sample by laser ablation includes three spots on a sample plus an additional three spotsBoston University User Fee Structure for ICP-ES, ICP-MS and Laser Labs The Department of Earth come to BU and digest their samples in our labs with sufficient training. Laser-ICP-MS cost per sample

  7. STATEMENT OF UNDERSTANDING UCLA ACADEMIC APPRENTICE PERSONNEL FEE REMISSION BENEFITS FOR 2014-2015

    E-Print Network [OSTI]

    Williams, Gary A.

    STATEMENT OF UNDERSTANDING UCLA ACADEMIC APPRENTICE PERSONNEL FEE REMISSION BENEFITS FOR 2014-2015 Congratulations on receiving an academic apprentice appointment at UCLA! Academic apprentice titles are intended in teaching and research. Apprentice personnel in the research series (i.e., Graduate Student Researchers

  8. Page 1 of 2 2014-15 Postgraduate Tuition Fees for Institute of Petroleum

    E-Print Network [OSTI]

    Greenaway, Alan

    Page 1 of 2 2014-15 Postgraduate Tuition Fees for Institute of Petroleum Engineering programmes Programme title Award FT PT FT PT FT PT Petroleum Geoscience MSc / PGDip £9,720 - £11,470 - £25,920 - Petroleum Engineering MSc / PGDip £9,720 - £11,470 - £25,920 - Reservoir Evaluation & Management MSc / PGDip

  9. Page 1 of 3 2013-14 Postgraduate Tuition Fees for Institute of Petroleum

    E-Print Network [OSTI]

    Painter, Kevin

    Page 1 of 3 2013-14 Postgraduate Tuition Fees for Institute of Petroleum Engineering programmes Overseas Home/EU Overseas Programme title Award FT PT FT PT FT PT FT PT FT PT Petroleum Geoscience MSc campus) MSc / PGDip / PGCert £4,600 - £5,430 - £12,000 - £4,520 - £23,400 - Petroleum Engineering MSc

  10. The US Department of Energy`s prime contractor fees on subcontractor costs

    SciTech Connect (OSTI)

    NONE

    1998-09-11T23:59:59.000Z

    In Fiscal Year 1996, the Department`s prime contractors awarded $5.3 billion in subcontracts. The purpose of this audit was to determine if the Department adjusted the fee bases of prime contractors to reflect the actual effort necessary to manage the technical and administrative activities of their subcontractors.

  11. Rental rate includes liability insurance (LDW), vehicle licensing fees, unlimited roundtrip mileage; $0.25/mile for one-way rentals and no drop fees for vehicles that are picked up and returned in the

    E-Print Network [OSTI]

    Arnold, Jonathan

    ; $0.25/mile for one-way rentals and no drop fees for vehicles that are picked up and returned in setting up direct billing for your department, please click link below: http://www

  12. A tissue engineering strategy for integrative cartilage repair

    E-Print Network [OSTI]

    Mroszczyk, Keri A

    2014-01-01T23:59:59.000Z

    Tissue engineering for cartilage repair is a promising approach for improving the healing of articular defects, as biomaterials and growth factors can be supplied directly to a focal lesion. However, integrating neo-tissue ...

  13. Optimizing chondrogenic factors and protein delivery methods for cartilage repair

    E-Print Network [OSTI]

    Florine, Emily Marie

    2012-01-01T23:59:59.000Z

    Joint injuries are common and often result in damage to cartilage, which has a limited ability to repair itself. Tissue engineering is a promising approach for improving cartilage healing in which biomaterials and chemical ...

  14. Incremental temporal reasoning in job shop scheduling repair

    E-Print Network [OSTI]

    Huang, Y.

    A working predictive schedule can be useless because of the various external or internal disruptions in a job shop. Total rescheduling may cause problems such as shop floor nervousness. Thus, the job shop scheduling repair ...

  15. Availability Analysis of Repairable Computer Systems and Stationarity Detection

    E-Print Network [OSTI]

    Sericola, Bruno

    Availability Analysis of Repairable Computer Systems and Stationarity Detection Bruno Sericola AbstractÐPoint availability and expected interval availability are dependability measures respectively in this paper a new algorithm to compute these two availability measures. This algorithm is based

  16. Intermediate hearth repair technique at Thyssen Stahl AG

    SciTech Connect (OSTI)

    Kowalski, W.; Bachhofen, H.J.; Ruether, P.; Ballewski, T. [Thyssen Stahl AG, Duisburg (Germany)

    1996-12-31T23:59:59.000Z

    Nowadays various techniques for the fastest possible intermediate repair and/or emplacement of refractory materials above the tuyere level allow a significant extension of furnace campaign life. The latter are hence now exclusively determined by the service life of the hearth. The improvement of hearth monitoring and the estimation of residual brick strength of the refractory lining on the basis of temperature measurements in the hearth enable the location of individual zones of premature wear. These measurement methods, which were developed by Thyssen Stahl AG, aid the decision to undertake selective repair of the hearth. Three areas of repair are differentiated: taphole zone; hearth wall, localized; and hearth wall, extensive. This hearth repair method is described in this report using the example of hearth refurbishing blast furnace 8, Hamborn.

  17. Repair Sequences in American Learners of German Interlanguage

    E-Print Network [OSTI]

    Wisbey, Evelyn

    2010-04-25T23:59:59.000Z

    This study in Conversation Analysis investigates the organization of other-initiated repair sequences in American learners of German, i.e., it examines how learners deal with troubles in hearing or understanding that they ...

  18. To: Mansueti, Lawrence Subject: RE: Pepco Scheduled Line Repair...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sent: Monday, January 29, 2007 6:28 PM To: Mansueti, Lawrence Subject: RE: Pepco Scheduled Line Repair Dec. 1-20, 2006 Larry, Regarding the planned line outage,...

  19. Providing protection: Agencies receive funding to repair, upgrade dams

    E-Print Network [OSTI]

    Wythe, Kathy

    2009-01-01T23:59:59.000Z

    Story by Kathy Wythe tx H2O | pg. 26 Providing protection Agencies receive funding to repair, upgrade dams along with local partners, can apply for grant funds, he said. Construction of the dams began through four federal authorizations..., called floodwater retarding structures and built mostly in rural areas during the 1950s to 1970s, are aging and need repairing. Others now protect urban areas that have developed downstream and need upgrading to meet more stringent safety standards...

  20. SUMMARY OF PROPOSED AMENDMENT TO REGULATION FSU-2.024, TUITION AND FEES; MS-NURSE ANESTHESIA PROGRAM; MD TUITION

    E-Print Network [OSTI]

    Weston, Ken

    SUMMARY OF PROPOSED AMENDMENT TO REGULATION FSU-2.024, TUITION AND FEES; MS-NURSE ANESTHESIA for a new Master of Science in Nurse Anesthesia program at the Panama City Florida Campus. The new program

  1. Proposals for Technology Innovation Projects Student technology fees are intended to enhance student learning and the student

    E-Print Network [OSTI]

    Farritor, Shane

    Proposals for Technology Innovation Projects Student technology fees scale if effective. Timeline Applications for Technology Innovation Projects innovative ideas about using technology? 2) Is the project designed to be led

  2. The North Carolina Solar Center offers free and fee-based technical services for manufacturers and other

    E-Print Network [OSTI]

    The North Carolina Solar Center offers free and fee- based technical services for manufacturers Training. Renewable Energy Assessments The Solar Center's renewable energy assessments focus on practical ways companies can incorporate renewable energy into their facilities and existing energy systems

  3. SEVIS FEE (I-901) for J and F visa applicants Please see US Government Website at www.fmjfee.com

    E-Print Network [OSTI]

    their entry to, stay in, and exit from the United States, will be used to record and track the I-901 fee.1a) wishing to apply for F-1, F-3, M-1, M-3, or J-1 status at a Port of Entry into the United States must pay and process the SEVIS fee before appearing at the Port of Entry. Nonimmigrants currently

  4. POSTGRADUATE TUITION FEES 2013/14 FULL TIME PROGRAMMES -UK/EU STUDENTS

    E-Print Network [OSTI]

    Anderson, Jim

    & IS Management £8,000 Msc Strategy and Innovation (new from Oct 2013) £8,000 Msc Finance (new from Oct 2013) £8,500 Msc Risk and Finance (new from Oct 2013) £8,500 MSC Project Management(new from Oct 2013) £8,000 Law in Public Health Practice (non professional) lower fee £5,700 MSc Leadership & Management in Health & Social

  5. Polymer nanocomposites for high-temperature composite repair

    SciTech Connect (OSTI)

    Sheng, Xia

    2008-12-01T23:59:59.000Z

    A novel repair agent for resin-injection repair of advanced high temperature composites was developed and characterized. The repair agent was based on bisphenol E cyanate ester (BECy) and reinforced with alumina nanoparticles. To ensure good dispersion and compatibility with the BECy matrix in nanocomposites, the alumina nanoparticles were functionalized with silanes. The BECy nanocomposites, containing bare and functionalized alumina nanoparticles, were prepared and evaluated for their thermal, mechanical, rheological, and viscoelastic properties. The monomer of BECy has an extremely low viscosity at ambient temperature, which is good for processability. The cured BECy polymer is a highly cross-linked network with excellent thermal mechanical properties, with a high glass transition temperature (T{sub g}) of 270 C and decomposition temperature above 350 C. The incorporation of alumina nanoparticles enhances the mechanical and rheological properties of the BECy nanocomposites. Additionally, the alumina nanoparticles are shown to catalyze the cure of BECy. Characterization of the nanocomposites included dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron microscopy. The experimental results show that the BECy nanocomposite is a good candidate as repair agent for resin-injection repair applications.

  6. Repairs for damaged bolt holes in continuous fiber reinforced plastics 

    E-Print Network [OSTI]

    Copps, Kevin Daniel

    1992-01-01T23:59:59.000Z

    repair method for damaged bolt holes in such composites. Bolt holes in three types of graphite-epoxy were purposely damaged and then repaired. Each was tested to characterize its static and fatigue behavior. The tests used a special fixture to simulate... composite joints . Bearing-bypass ratio can change the failure mode of bolted composite joints 7 Drilling defects in graphite-epoxy coupons 12 26 The exit side of a IM7/8551-7A 18 ply tape coupon showing the damage due to drilling 27 9 Resin filled...

  7. Development of criteria for fatigue repairs in bridge girders damaged by out-of-plane distortion

    E-Print Network [OSTI]

    Wilson, Scott David

    1994-01-01T23:59:59.000Z

    repaired and unrepaired cracks along the longitudinal web-to-flange connection of a plate girder subjected to a linear bending stress to determine if repair by drilling holes is really necessary. The results of the finite element analyses...

  8. DNA Repair Decline During Mouse Spermiogenesis Results in the Accumulation of Heritable DNA Damage

    E-Print Network [OSTI]

    Marchetti, Francesco

    2008-01-01T23:59:59.000Z

    van Buul, D.G. de Rooij, DNA double-strand breaks and gamma-for the transition proteins in DNA strand break repair, FEBSBoissonneault, Stimulation of DNA repair by the spermatidal

  9. Characterization of Mg Binding to the DNA Repair ProteinApurinic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mg Binding to the DNA Repair Protein ApurinicApyrimidic Endonuclease 1 via Solid-State Mg NMR Spectroscopy. Characterization of Mg Binding to the DNA Repair Protein Apurinic...

  10. DNA repair decline during mouse spermiogenesis results in the accumulation of heritable DNA damage

    E-Print Network [OSTI]

    Marchetti, Francesco

    2008-01-01T23:59:59.000Z

    van Buul, D.G. de Rooij, DNA double-strand breaks and gamma-for the transition proteins in DNA strand break repair, FEBSBoissonneault, Stimulation of DNA repair by the spermatidal

  11. An engineering analysis of natural and biomimetic self-repair processes for solar energy harvesting

    E-Print Network [OSTI]

    Boghossian, Ardemis A. (Ardemis Anoush)

    2012-01-01T23:59:59.000Z

    Plants have evolved highly sophisticated mechanisms of self-repair to regenerate proteins that become photo-damaged over time. Key to this self-repair process is the reversible self-assembly of protein complexes, which is ...

  12. What is greener than a VMT tax? The case for an indexed energy user fee to finance us surface transportation

    SciTech Connect (OSTI)

    Greene, David L [ORNL

    2011-01-01T23:59:59.000Z

    Highway finance in the United States is perceived by many to be in a state of crisis, primarily due to the erosion of motor fuel tax revenues due to inflation, fuel economy improvement, increased use of alternative sources of energy and diversion of revenues to other purposes. Monitoring vehicle miles of travel (VMT) and charging highway users per mile has been proposed as a replacement for the motor fuel tax. A VMT user fee, however, does not encourage energy efficiency in vehicle design, purchase and operation, as would a user fee levied on all forms of commercial energy used for transportation and indexed to the average efficiency of vehicles on the road and to inflation. An indexed roadway user toll on energy (IRoUTE) would induce two to four times as much reduction in greenhouse gas (GHG) emissions and petroleum use as a pure VMT user fee. However, it is not a substitute for pricing GHG emissions and would make only a small but useful contribution to reducing petroleum dependence. An indexed energy user fee cannot adequately address the problems of traffic congestion and heavy vehicle cost responsibility. It could, however, be a key component of a comprehensive system of financing surface transportation that would eventually also include time and place specific monitoring of VMT for congestion pricing, externality charges and heavy vehicle user fees.

  13. The Need for Language Repair The Reformation Algorithm Discussion Reformation: A Domain-Independent Algorithm

    E-Print Network [OSTI]

    St Andrews, University of

    The Need for Language Repair The Reformation Algorithm Discussion Reformation: A Domain of Edinburgh University of St Andrews, 27th November 2013 #12;The Need for Language Repair The Reformation Algorithm Discussion Outline 1 The Need for Language Repair 2 The Reformation Algorithm 3 Discussion #12;The

  14. Development of quick repairing technique for ceramic burner in hot stove of blast furnace

    SciTech Connect (OSTI)

    Kondo, Atsushi; Doura, Kouji; Nakamura, Hirofumi [Sumitomo Metal Industries, Ltd., Wakayama (Japan). Wakayama Steel Works

    1997-12-31T23:59:59.000Z

    Refractories of ceramic burner in hot stoves at Wakayama No. 4 blast furnace were damaged. There are only three hot stoves, so repairing must be done in a short. Therefore, a quick repairing technique for ceramic burners has been developed, and two ceramic burners were repaired in just 48 hours.

  15. Computer Graphic Design Fees Scholarship R E G U L A T I O N S F O R 2 0 1 5

    E-Print Network [OSTI]

    Waikato, University of

    Computer Graphic Design Fees Scholarship R E G U L A T I O N S F O R 2 0 1 5 BACKGROUND This Scholarship was established in 2009 by the Faculty of Computing and Mathematical Sciences. REGULATIONS 1. The Scholarship will be known as the Computer Graphic Design Fees Scholarship. 2. The Scholarship will have

  16. 32192UniprintNT11.09NJ HE105 Updated November 2013 Controlled by Coordinator Higher Education Enrolments & Fees PAGE 1 of 1

    E-Print Network [OSTI]

    32192UniprintNT11.09NJ HE105 Updated November 2013 · Controlled by Coordinator Higher Education Enrolments & Fees PAGE 1 of 1 Higher Education Employer Authorisation Form Higher Education to withdraw this contract, for any reason, during 2014. Higher Education Fees are subject to the Higher

  17. HOW TO REPAIR A SECOND-ORDER SURFACE FOR COMPUTER

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 HOW TO REPAIR A SECOND-ORDER SURFACE FOR COMPUTER EXPERIMENTS BY KRIGING Astrid JOURDAN and analysis of computer experiments have been widely investigated in the past decade. Two approaches seem describes and compares them briefly in order to present a methodology for computer experiments based

  18. Thermosetting Polymer-Matrix Composites for Strucutral Repair Applications

    SciTech Connect (OSTI)

    William Kirby Goertzen

    2007-12-01T23:59:59.000Z

    Several classes of thermosetting polymer matrix composites were evaluated for use in structural repair applications. Initial work involved the characterization and evaluation of woven carbon fiber/epoxy matrix composites for structural pipeline repair. Cyanate ester resins were evaluated as a replacement for epoxy in composites for high-temperature pipe repair applications, and as the basis for adhesives for resin infusion repair of high-temperature composite materials. Carbon fiber/cyanate ester matrix composites and fumed silica/cyanate ester nanocomposites were evaluated for their thermal, mechanical, viscoelastic, and rheological properties as they relate to their structure, chemistry, and processing characteristics. The bisphenol E cyanate ester under investigation possesses a high glass transition temperature, excellent mechanical properties, and unique ambient temperature processability. The incorporate of fumed silica served to enhance the mechanical and rheological properties of the polymer and reduce thermal expansion without sacrificing glass transition or drastically altering curing kinetics. Characterization of the composites included dynamic mechanical analysis, thermomechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron microscopy.

  19. Development/Plasticity/Repair Identification of Nicotinic Acetylcholine Receptor Recycling

    E-Print Network [OSTI]

    Alford, Simon

    Development/Plasticity/Repair Identification of Nicotinic Acetylcholine Receptor Recycling and Its, University of Michigan, Ann Arbor, Michigan 48109 In the CNS, receptor recycling is critical for synaptic plasticity; however, the recycling of receptors has never been observed at peripheral synapses. Using a novel

  20. Corrosion Repair and Corrosion Protection of Reinforced Concrete Structures in

    E-Print Network [OSTI]

    Das, Suman

    11/14/2014 1 Corrosion Repair and Corrosion Protection of Reinforced Concrete Structures in Pulp and Paper Mills Vector Construction / Vector Corrosion Technologies www.vectorgroup.com www.vector-corrosion.com Presentation Outline · Introduction · Corrosion of Reinforced Concrete Structures · Protection of Chests

  1. Methods to alter levels of a DNA repair protein

    DOE Patents [OSTI]

    Petrini, John H.; Morgan, William Francis; Maser, Richard Scott; Carney, James Patrick

    2006-10-17T23:59:59.000Z

    An isolated and purified DNA molecule encoding a DNA repair protein, p95, is provided, as is isolated and purified p95. Also provided are methods of detecting p95 and DNA encoding p95. The invention further provides p95 knock-out mice.

  2. Breakthrough Technologies In Vivo Observation of Cavitation and Embolism Repair

    E-Print Network [OSTI]

    Holbrook, N. Michele

    Breakthrough Technologies In Vivo Observation of Cavitation and Embolism Repair Using Magnetic that approximately 10 vessels had cavitated during this time. Leaf water potentials decreased from 1.25 to 2.1 MPa cavitation. Refilling of xylem vessels occurred as soon as the lights were switched off, with the majority

  3. Development/Plasticity/Repair Group I Metabotropic Glutamate Receptors Control

    E-Print Network [OSTI]

    Grau, James

    Development/Plasticity/Repair Group I Metabotropic Glutamate Receptors Control Metaplasticity the spinal cord can support several forms of plasticity, including response­outcome (instrumental) learning. This inhibi- tion of plasticity in spinal learning is itself a form of plasticity that requires i

  4. Complications of Endovascular Repair of Abdominal Aortic Aneurysms: A Review

    SciTech Connect (OSTI)

    Katzen, Barry T. [Baptist Cardiac and Vascular Institute, Baptist Health Systems, Department of Interventional Radiology, Florida (United States)], E-mail: barryk@baptisthealth.net; MacLean, Alexandra A. [New York Hospital-Queens, Department of Surgery (United States)

    2006-12-15T23:59:59.000Z

    The endovascular procedure for repair of abdominal aortic aneurysms has had an enormous impact on the treatment of this challenging disease. Complications, however, do occur and it is important to have a thorough understanding of the array of complications and appropriate management strategies. In this review of endovascular complications, we describe early and late complications paying particular attention to preventive, treatment and surveillance strategies.

  5. FY14 AWARD FEE DETERMINATION SCORECARD Contractor: Wastren-EnergX Mission Support, LLC.

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of YearFLASH2011-17-OPAMDepartmentofofForewordinFY 2016AWARD FEE

  6. Fee Waiver and Reduction Criteria | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron4 Self-Scrubbing:,,of ScienceCurrentEmergencyU.S.U.S. DOE Office ofFee

  7. File:Geothermal fee schedule 08-08-10.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to: navigation,SizeEthiopiametst 226.pdf:08, 15Geothermal fee schedule

  8. Combined Haploinsufficiency for ATM and RAD9 as a Factor in Cell Transformation, Apoptosis, and DNA Lesion Repair Dynamics

    E-Print Network [OSTI]

    Lesion Repair Dynamics Lubomir B. Smilenov, Howard B. Lieberman, Stephen A. Mitchell, Ronald A. Baker

  9. Biomolecular Simulation of Base Excision Repair and Protein Signaling

    SciTech Connect (OSTI)

    Straatsma, TP; McCammon, J. A.; Miller, John H.; Smith, Paul E.; Vorpagel, Erich R.; Wong, Chung F.; Zacharias, Martin W.

    2006-03-03T23:59:59.000Z

    The goal of the Biomolecular Simulation of Base Excision Repair and Protein Signaling project is to enhance our understanding of the mechanism of human polymerase-?, one of the key enzymes in base excision repair (BER) and the cell-signaling enzymes cyclic-AMP-dependent protein kinase. This work used molecular modeling and simulation studies to specifically focus on the • dynamics of DNA and damaged DNA • dynamics and energetics of base flipping in DNA • mechanism and fidelity of nucleotide insertion by BER enzyme human polymerase-? • mechanism and inhibitor design for cyclic-AMP-dependent protein kinase. Molecular dynamics simulations and electronic structure calculations have been performed using the computer resources at the Molecular Science Computing Facility at the Environmental Molecular Sciences Laboratory.

  10. 7.15.09, Page 1 of 1 What You Should Know about Tuition and Fees in 2009-10

    E-Print Network [OSTI]

    Karsai, Istvan

    at ETSU in 2009-10? Starting this fall, ETSU and all other Tennessee Board of Regents institutions other fees will students pay in 2009-10? In addition to tuition, students will pay ETSU's program will owe this fall? You can use ETSU's tuition calculator to determine your costs this fall based

  11. Program 2015 Date Regular Fee Registration Dates EMC in Residence May 3-8 $780 Feb. 3 Apr. 10, 2015

    E-Print Network [OSTI]

    Ellis, Randy

    Program 2015 Date Regular Fee Registration Dates EMC in Residence May 3-8 $780 Feb. 3­ Apr. 10, 2015 2015 EMC Residence Program The Enrichment Mini-Course (EMC) Residential Program is an opportunity, and participate in extra- curricular activities. Why EMC at Queen's? Take top quality academic courses taught

  12. Program 2014 Date Regular Fee Registration Dates EMC in Residence May 4-9 $650 Feb 3-28, 2014

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Program 2014 Date Regular Fee Registration Dates EMC in Residence May 4-9 $650 Feb 3-28, 2014 2014 EMC Residence Program The Enrichment Mini-Course (EMC) Residential Program is an opportunity and dinner each day in the cafeteria, and participate in extra-curricular activities. Why EMC at Queen

  13. Econometrics of Models with Strategic Interaction Presenter: Elie Tamer (Northwestern) Fee: HE delegates: 90; other delegates: 720

    E-Print Network [OSTI]

    Saunders, Mark

    Econometrics of Models with Strategic Interaction Presenter: Elie Tamer (Northwestern) Fee: HE of the econometrics questions that arise when analyzing models with multiple decision makers interacting a set of econometric theorists, applied economists and economic theorists that will share their views

  14. Testing and evaluation of grout repaired tubular members 

    E-Print Network [OSTI]

    Nunn, John Mansfield

    1992-01-01T23:59:59.000Z

    of Failed Weld Seam page 64 65 66 69 73 74 80 82 31 Ideahzed Tubular Dented Member for the Taby, Zhou, and the Parsanejad Methods. . . . . . . . . . . . . . , . 92 32 Dent Geometry for the Elhnas Method 96 33 Experimental Ultimate Capamty vs P... commonly used to repiur damaged tubular members. These include 1 ) welding a sleeve around the outside of the member in the location of the damage, 2 ) applying an externally grouted clamp, and 3 ) applying internal grout Ideally, the repair method...

  15. Waste-audit study: Automotive repairs. Final report

    SciTech Connect (OSTI)

    Toy, W.M.

    1987-05-01T23:59:59.000Z

    This document reports on a waste audit study which investigated and analyzed the automotive-repair industry in California. It assessed current waste-management practices and developed specific on-site and off-site waste-treatment recycling alternatives. The conclusions identify and address illegal disposal practices. Recommendations include the segregation of specific wastes for proper disposal and economic analysis of on-site waste-recycling equipment.

  16. FOIA FEES

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian NuclearandJunetrackEllen|JulyR--FOIA Support Services for the

  17. FY 1996 performance evaluation and incentive fee agreement for the Pacific Northwest National Laboratory

    SciTech Connect (OSTI)

    NONE

    1996-01-08T23:59:59.000Z

    The document describes the critical outcomes, objectives, performance indicators, expected levels of performance, specific detail on incentive fee, and agreements concerning the evaluation of the Pacific Northwest National Laboratory`s FY 1996 Self-Assessment. This information will be the basis for the evaluation of the Laboratory`s performance as required by Articles H-24 and H-25 of the Contract. For the period October 1, 1995 through September 30, 1996, the Parties have agreed to measure and evaluate the individual areas of Laboratory activities identified herein. This reflects the fact that the Contractor will be evaluated on two dimensions, namely (1) accomplishment of critical outcomes and (2) the effectiveness of the Contractor`s self-assessment program. Each area will receive its own evaluation rating and they will be combined to determined an overall rating with the first area weighted at 75% and the second area weighted at 25%.

  18. Changing Patterns of Rangeland Use: Functional Characteristics of the Economics and Operations of Fee Hunting Enterprises in Central and South Texas

    E-Print Network [OSTI]

    Sultenfuss, Sherry D.

    2010-07-14T23:59:59.000Z

    Ranching communities in Texas have long recognized fee hunting as a natural resource with the potential of directly affecting agricultural incomes. Hunting as an industry today, appears to be developing into an economic substitute for Texas ranchers...

  19. Using 3D Painting to Build and Repair Parts | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a part or add material to repair an existing part. Cold spray is part of GE's expanded additive manufacturing toolkit. An error occurred. Unable to execute Javascript. nteneh...

  20. Brain necrosis after fractionated radiation therapy: Is the halftime for repair longer than we thought?

    SciTech Connect (OSTI)

    Bender, Edward T. [Department of Human Oncology, University of Wisconsin-Madison, School of Medicine and Public Health, 600 Highland Avenue, Madison, Wisconsin 53792 (United States)

    2012-11-15T23:59:59.000Z

    Purpose: To derive a radiobiological model that enables the estimation of brain necrosis and spinal cord myelopathy rates for a variety of fractionation schemes, and to compare repair effects between brain and spinal cord. Methods: Sigmoidal dose response relationships for brain radiation necrosis and spinal cord myelopathy are derived from clinical data using nonlinear regression. Three different repair models are considered and the repair halftimes are included as regression parameters. Results: For radiation necrosis, a repair halftime of 38.1 (range 6.9-76) h is found with monoexponential repair, while for spinal cord myelopathy, a repair halftime of 4.1 (range 0-8) h is found. The best-fit alpha beta ratio is 0.96 (range 0.24-1.73)Conclusions: A radiobiological model that includes repair corrections can describe the clinical data for a variety of fraction sizes, fractionation schedules, and total doses. Modeling suggests a relatively long repair halftime for brain necrosis. This study suggests that the repair halftime for late radiation effects in the brain may be longer than is currently thought. If confirmed in future studies, this may lead to a re-evaluation of radiation fractionation schedules for some CNS diseases, particularly for those diseases where fractionated stereotactic radiation therapy is used.

  1. A sociotechnical framework for understanding infrastructure breakdown and repair

    SciTech Connect (OSTI)

    Sims, Benjamin H [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    This paper looks at how and why infrastructure is repaired. With a new era of infrastructure spending underway, policymakers need to understand and anticipate the particular technical and political challenges posed by infrastructure repair. In particular, as infrastructure problems are increasingly in the public eye with current economic stimulus efforts, the question has increasingly been asked: why has it been so difficult for the United Statesto devote sustained resources to maintaining and upgrading its national infrastructure? This paper provides a sociotechnical framework for understanding the challenges of infrastructure repair, and demonstrates this framework using a case study of seismic retrofit of freeway bridges in California. The design of infrastructure is quite different from other types of design work even when new infrastructure is being designed. Infrastructure projects are almost always situated within, and must work with, existing infrastructure networks. As a result, compared to design of more discrete technological artifacts, the design of infrastructure systems requires a great deal of attention to interfaces as well as adaptation of design to the constraints imposed by existing systems. Also, because of their scale, infrastructural technologies engage with social life at a level where explicit political agendas may playa central role in the design process. The design and building of infrastructure is therefore often an enormously complex feat of sociotechnical engineering, in which technical and political agendas are negotiated together until an outcome is reached that allows the project to move forward. These sociotechnical settlements often result in a complex balancing of powerful interests around infrastructural artifacts; at the same time, less powerful interests have historically often been excluded or marginalized from such settlements.

  2. Repair welding of fusion reactor components. Final technical report

    SciTech Connect (OSTI)

    Chin, B.A.; Wang, C.A.

    1997-09-30T23:59:59.000Z

    The exposure of metallic materials, such as structural components of the first wall and blanket of a fusion reactor, to neutron irradiation will induce changes in both the material composition and microstructure. Along with these changes can come a corresponding deterioration in mechanical properties resulting in premature failure. It is, therefore, essential to expect that the repair and replacement of the degraded components will be necessary. Such repairs may require the joining of irradiated materials through the use of fusion welding processes. The present ITER (International Thermonuclear Experimental Reactor) conceptual design is anticipated to have about 5 km of longitudinal welds and ten thousand pipe butt welds in the blanket structure. A recent study by Buende et al. predict that a failure is most likely to occur in a weld. The study is based on data from other large structures, particularly nuclear reactors. The data used also appear to be consistent with the operating experience of the Fast Flux Test Facility (FFTF). This reactor has a fuel pin area comparable with the area of the ITER first wall and has experienced one unanticipated fuel pin failure after two years of operation. The repair of irradiated structures using fusion welding will be difficult due to the entrapped helium. Due to its extremely low solubility in metals, helium will diffuse and agglomerate to form helium bubbles after being trapped at point defects, dislocations, and grain boundaries. Welding of neutron-irradiated type 304 stainless steels has been reported with varying degree of heat-affected zone cracking (HAZ). The objectives of this study were to determine the threshold helium concentrations required to cause HAZ cracking and to investigate techniques that might be used to eliminate the HAZ cracking in welding of helium-containing materials.

  3. Blade reliability collaborative : collection of defect, damage and repair data.

    SciTech Connect (OSTI)

    Ashwill, Thomas D.; Ogilvie, Alistair B.; Paquette, Joshua A.

    2013-04-01T23:59:59.000Z

    The Blade Reliability Collaborative (BRC) was started by the Wind Energy Technologies Department of Sandia National Laboratories and DOE in 2010 with the goal of gaining insight into planned and unplanned O&M issues associated with wind turbine blades. A significant part of BRC is the Blade Defect, Damage and Repair Survey task, which will gather data from blade manufacturers, service companies, operators and prior studies to determine details about the largest sources of blade unreliability. This report summarizes the initial findings from this work.

  4. Rebels, Activists, and Repairers: Youth and Social Change in Africa

    E-Print Network [OSTI]

    Pollock, Colleen

    2011-12-31T23:59:59.000Z

    #3;answer#3;questions#3; (Irvine#3;1978)#3;(i.e.#3;?“what#3;does#3;the#3;ducky#3;say??”)#3;because#3;such#3;questioning#3;indicates#3;a#3;riddle#3;with#3; a#3;trick#3;answer#3;or#3;a#3;direct#3;challenge,#3;and#3;it#3;is#3;considered#3;an#3;insult#3... Date Defended: May 17, 2011 #3; #3; #3; #3; #3; #3; ii #3; The Thesis Committee for Colleen Pollock certifies that this is the approved version of the following thesis: REBELS, ACTIVISTS, AND REPAIRERS: THE ROLE OF YOUTH IN SOCIAL CHANGE...

  5. Repairs for damaged bolt holes in continuous fiber reinforced plastics

    E-Print Network [OSTI]

    Copps, Kevin Daniel

    1992-01-01T23:59:59.000Z

    ANALYSIS Model Definition Analysis Results Comparing Lay-ups Pin-conditions vs. clamping pressure Stress interactions Repair material CONCLUSIONS REFERENCES APPENDIX VITA 21 22 23 24 25 25 25 26 27 27 28 29 30 30 31 33 33 34 34... under pin conditions . 35 16 A modification was made to the test fixture to relieve the high cyclic stresses on the bolt 37 vu 17 When clamping pressure is applied, a normally drilled, unrepaired, fastener hole is stronger and tends to fail in net...

  6. Repairs to silence Tower bells | The Daily Texan http://dailytexanonline.com/news/2012/09/27/repairs-to-silence-tower-bells 2 of 4 10/2/2012 8:55 AM

    E-Print Network [OSTI]

    John, Lizy Kurian

    Repairs to silence Tower bells | The Daily Texan http://dailytexanonline.com/news/2012/09/27/repairs-to-silence-tower-bells 2 of 4 10/2/2012 8:55 AM #12;Repairs to silence Tower bells | The Daily Texan http://dailytexanonline.com/news/2012/09/27/repairs-to-silence-tower-bells 3 of 4 10/2/2012 8

  7. Cooperative Repair with Minimum-Storage Regenerating Codes for Distributed Storage

    E-Print Network [OSTI]

    Li, Baochun

    Cooperative Repair with Minimum-Storage Regenerating Codes for Distributed Storage Jun Li, Baochun--Distributed storage systems store redundant data to tolerate failures of storage nodes and lost data should be repaired when storage nodes fail. A class of MDS codes, called minimum- storage regenerating (MSR) codes

  8. 4 CONCRETE REPAIR BULLETIN MAY/JUNE2001 Laser Profilometry for

    E-Print Network [OSTI]

    Maerz, Norbert H.

    4 CONCRETE REPAIR BULLETIN MAY/JUNE2001 Laser Profilometry for Concrete Substrate Characterization and resins are non- corrosive, they are ideally suited for the repair and retrofitting of concrete bridges highly upon the quality of the bond between the concrete and the laminate. Experience has shown that when

  9. On the Design of an Interactive, Patient-Specific Surgical Simulator for Mitral Valve Repair

    E-Print Network [OSTI]

    On the Design of an Interactive, Patient-Specific Surgical Simulator for Mitral Valve Repair Neil A repair of the mitral valve is a difficult procedure that is often avoided in favor of less effective valve replacement because of the associated technical challenges facing non-expert surgeons

  10. Bridge Damage and Repair Costs from Hurricane Katrina Jamie Padgett1

    E-Print Network [OSTI]

    Padgett, Jamie Ellen

    Bridge Damage and Repair Costs from Hurricane Katrina Jamie Padgett1 ; Reginald DesRoches2 ; Bryant caused significant damage to the transportation system in the Gulf Coast region. The overall cost to repair or replace the bridges damaged during the hurricane is estimated at over $1 billion. This paper

  11. Automatic Repair of Buggy If Conditions and Missing Preconditions with SMT

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Automatic Repair of Buggy If Conditions and Missing Preconditions with SMT Favio De into a Satisfiability Modulo Theory (SMT) problem, and translating the SMT result ­ if there exists one ­ into a source, Verification Keywords Automatic repair, test suite, buggy if condition, missing pre- condition, SMT, angelic

  12. Bone Marrow Stimulation of the Medial Femoral Condyle Produces Inferior Cartilage and Bone Repair Compared to the Trochlea in a

    E-Print Network [OSTI]

    Buschmann, Michael

    Bone Marrow Stimulation of the Medial Femoral Condyle Produces Inferior Cartilage and Bone Repair femoral condylar (MFC) versus femoral trochlear (TR) defects 3 months after bone marrow stimulation: cartilage repair; medial femoral condyle; trochlea; bone marrow stimulation; meniscus degeneration Articular

  13. ITERATIVE REPAIR PLANNING FOR SPACECRAFT OPERATIONS USING THE ASPEN SYSTEM Gregg Rabideau, Russell Knight, Steve Chien, Alex Fukunaga, Anita Govindjee

    E-Print Network [OSTI]

    Schaffer, Steven

    ITERATIVE REPAIR PLANNING FOR SPACECRAFT OPERATIONS USING THE ASPEN SYSTEM Gregg Rabideau, Russell and Planning Environment (ASPEN). ASPEN encodes complex spacecraft knowledge of operability constraints, flight generation of low level spacecraft sequences. Using a technique called iterative repair, ASPEN classifies

  14. Injection repair of carbon fiber/bismaleimide composite panels with bisphenol E cyanate ester resin

    SciTech Connect (OSTI)

    Thunga, Mahendra [Ames Laboratory; Bauer, Amy [Iowa State University; Obusek, Kristine [Fleet Readiness Center East; Meilunas, Ray [Naval Air Warfare Center Aircraft Division; Akinc, Mufit [Ames Laboratory; Kessler, Michael R [Ames Laboratory

    2014-08-01T23:59:59.000Z

    Resin injection of bisphenol E cyanate ester, a low viscosity resin that cures into a high temperature thermoset polymer, is investigated as a reliable repair method to restore strength and stiffness in delaminated carbon fiber/bismaleimide composites used in aircraft panels. The influence of temperature on the viscosity of the uncured resin was measured to optimize the injection conditions for high resin infiltration into the delaminations. The repair efficiency of the resin was evaluated by varying the panel thickness and the method by which the delamination damage was created in the composite specimens. Ultrasonic scanning (C-scan), flash thermography images, and cross-section analysis of repaired panels revealed excellent resin infiltration into the damaged region. Evaluation of mechanical repair efficiency using both bending stiffness and in-plain compressive strength of the composite panels as the repair metrics showed values exceeding 100%.

  15. Repair of gamma-ray-induced DNA base damage in xeroderma pigmentosum cells

    SciTech Connect (OSTI)

    Fornace, A.J. Jr.; Dobson, P.P.; Kinsella, T.J.

    1986-04-01T23:59:59.000Z

    The repair of DNA damage produced by /sup 137/Cs gamma irradiation was measured with a preparation from Micrococcus luteus containing DNA damage-specific endonucleases in combination with alkaline elution. The frequency of these endonuclease sensitive sites (ESS) was determined after 54 or 110 Gy of oxic irradiation in normal and xeroderma pigmentosum (XP) fibroblasts from complementation groups A, C, D, and G. Repair was rapid in all cell strains with greater than 50% repair after 1.5 h of repair incubation. At later repair times, 12-17 h, more ESS remained in XP than in normal cells. The frequency of excess ESS in XP cells was approximately 0.04 per 10(9) Da of DNA per Gy which was equivalent to 10% of the initial ESS produced. The removal of ESS was comparable in XP cells with normal radiosensitivity and XP3BR cells which have been reported to be moderately radiosensitive.

  16. New Technologies for Repairing Aging Cables in Nuclear Power Plants

    SciTech Connect (OSTI)

    Simmons, Kevin L.; Fifield, Leonard S.; Westman, Matthew P.

    2013-09-11T23:59:59.000Z

    The goal of this project is to demonstrate a proof-of-concept for a technique to repair aging cables that have been subjected to degradation associated with long-term thermal and radiation exposure in nuclear power plants. The physical degradation of the aging cables manifests itself primarily as cracking and increased brittleness of the polymeric electrical insulation. Therefore, the proposed cable-repair concept comprises development of techniques to impart a softening agent within the deteriorated polymer insulation jacket so as to regain the ability of the insulation to stretch without failing and possibly to heal existing cracks in the insulation. Our approach is to use commercially available ethylene-propylene rubber (EPR) as the relevant test material, demonstrate the adsorption of chemical treatments in the EPR and quantify changes in resulting physical and mechanical properties. EPR cable samples have been thermally treated in air to produce specimens corresponding to the full range of cable age-performance points from new (>350% elongation at break) to end-of-life (<50% elongation at break). The current focus is on two chemical treatments selected as candidates for restoring age-related cable elasticity loss: a rubber plasticizer and a reactive silane molecule. EPR specimens of 200, 150, 100, and 50% elongation at break have been soaked in the candidate chemical treatments and the kinetics of chemical uptake, measured by change in mass of the samples, has been determined. Mechanical properties as a function of aging and chemical treatment have been measured including ultimate tensile strength, tensile modulus at 50% strain, elongation at break, and storage modulus. Dimensional changes with treatment and changes in glass transition temperature were also investigated. These ongoing experiments are expected to provide insight into the physical-chemical nature of the effect of thermal degradation on EPR rejuvenation limits and to advance novel methods for restoring the ability of degraded EPR to be compliant and resist fracture. The results of this research reveal that absorption of chemical treatments can lower the glass transition temperature and modulus of EPR. Chemical treatments pursued thus far have proven ineffective at restoring EPR strength and elongation at break. Future work will combine the plasticizer modalities found to successfully increase the volume of the EPR, reduce EPR glass transition temperature and reduce EPR modulus with promising chemistries that will repair the damage of the polymer, potentially using the plasticizer as a host for the new chemistry.

  17. Method of tissue repair using a composite material

    DOE Patents [OSTI]

    Hutchens, Stacy A; Woodward, Jonathan; Evans, Barbara R; O'Neill, Hugh M

    2014-03-18T23:59:59.000Z

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  18. Neurological Complications Following Endoluminal Repair of Thoracic Aortic Disease

    SciTech Connect (OSTI)

    Morales, J. P.; Taylor, P. R.; Bell, R. E.; Chan, Y. C. [Guy's and St. Thomas' Foundation Hospital NHS Trust, Department of Vascular Surgery (United Kingdom); Sabharwal, T. [Guy's and St. Thomas' Foundation Hospital NHS Trust, Department of Interventional Radiology (United Kingdom); Carrell, T. W. G. [Guy's and St. Thomas' Foundation Hospital NHS Trust, Department of Vascular Surgery (United Kingdom); Reidy, J. F. [Guy's and St. Thomas' Foundation Hospital NHS Trust, Department of Interventional Radiology (United Kingdom)], E-mail: John.Reidy@gstt.nhs.uk

    2007-09-15T23:59:59.000Z

    Open surgery for thoracic aortic disease is associated with significant morbidity and the reported rates for paraplegia and stroke are 3%-19% and 6%-11%, respectively. Spinal cord ischemia and stroke have also been reported following endoluminal repair. This study reviews the incidence of paraplegia and stroke in a series of 186 patients treated with thoracic stent grafts. From July 1997 to September 2006, 186 patients (125 men) underwent endoluminal repair of thoracic aortic pathology. Mean age was 71 years (range, 17-90 years). One hundred twenty-eight patients were treated electively and 58 patients had urgent procedures. Anesthesia was epidural in 131, general in 50, and local in 5 patients. Seven patients developed paraplegia (3.8%; two urgent and five elective). All occurred in-hospital apart from one associated with severe hypotension after a myocardial infarction at 3 weeks. Four of these recovered with cerebrospinal fluid (CSF) drainage. One patient with paraplegia died and two had permanent neurological deficit. The rate of permanent paraplegia and death was 1.6%. There were seven strokes (3.8%; four urgent and three elective). Three patients made a complete recovery, one had permanent expressive dysphasia, and three died. The rate of permanent stroke and death was 2.1%. Endoluminal treatment of thoracic aortic disease is an attractive alternative to open surgery; however, there is still a risk of paraplegia and stroke. Permanent neurological deficits and death occurred in 3.7% of the patients in this series. We conclude that prompt recognition of paraplegia and immediate insertion of a CSF drain can be an effective way of recovering spinal cord function and improving the prognosis.

  19. Development and validation of bonded composite doubler repairs for commercial aircraft.

    SciTech Connect (OSTI)

    Roach, Dennis Patrick; Rackow, Kirk A.

    2007-07-01T23:59:59.000Z

    A typical aircraft can experience over 2,000 fatigue cycles (cabin pressurizations) and even greater flight hours in a single year. An unavoidable by-product of aircraft use is that crack, impact, and corrosion flaws develop throughout the aircraft's skin and substructure elements. Economic barriers to the purchase of new aircraft have placed even greater demands on efficient and safe repair methods. The use of bonded composite doublers offers the airframe manufacturers and aircraft maintenance facilities a cost effective method to safely extend the lives of their aircraft. Instead of riveting multiple steel or aluminum plates to facilitate an aircraft repair, it is now possible to bond a single Boron-Epoxy composite doubler to the damaged structure. The FAA's Airworthiness Assurance Center at Sandia National Labs (AANC), Boeing, and Federal Express completed a pilot program to validate and introduce composite doubler repair technology to the U.S. commercial aircraft industry. This project focused on repair of DC-10 fuselage structure and its primary goal was to demonstrate routine use of this repair technology using niche applications that streamline the design-to-installation process. As composite doubler repairs gradually appear in the commercial aircraft arena, successful flight operation data is being accumulated. These commercial aircraft repairs are not only demonstrating the engineering and economic advantages of composite doubler technology but they are also establishing the ability of commercial maintenance depots to safely adopt this repair technique. This report presents the array of engineering activities that were completed in order to make this technology available for widespread commercial aircraft use. Focused laboratory testing was conducted to compliment the field data and to address specific issues regarding damage tolerance and flaw growth in composite doubler repairs. Fatigue and strength tests were performed on a simulated wing repair using a substandard design and a flawed installation. In addition, the new Sol-Gel surface preparation technique was evaluated. Fatigue coupon tests produced Sol-Gel results that could be compared with a large performance database from conventional, riveted repairs. It was demonstrated that not only can composite doublers perform well in severe off-design conditions (low doubler stiffness and presence of defects in doubler installation) but that the Sol-Gel surface preparation technique is easier and quicker to carry out while still producing optimum bonding properties. Nondestructive inspection (NDI) methods were developed so that the potential for disbond and delamination growth could be monitored and crack growth mitigation could be quantified. The NDI methods were validated using full-scale test articles and the FedEx aircraft installations. It was demonstrated that specialized NDI techniques can detect flaws in composite doubler installations before they reach critical size. Probability of Detection studies were integrated into the FedEx training in order to quantify the ability of aircraft maintenance depots to properly monitor these repairs. In addition, Boeing Structural Repair and Nondestructive Testing Manuals were modified to include composite doubler repair and inspection procedures. This report presents the results from the FedEx Pilot Program that involved installation and surveillance of numerous repairs on operating aircraft. Results from critical NDI evaluations are reported in light of damage tolerance assessments for bonded composite doublers. This work has produced significant interest from airlines and aircraft manufacturers. The successful Pilot Program produced flight performance history to establish the durability of bonded composite patches as a permanent repair on commercial aircraft structures. This report discusses both the laboratory data and Pilot Program results from repair installations on operating aircraft to introduce composite doubler repairs into mainstream commercial aircraft use.

  20. Effect of multiple repairs in girth welds of pipelines on the mechanical properties

    SciTech Connect (OSTI)

    Vega, O.E.; Hallen, J.M. [Departamento de Ingenieria Metalurgica, ESIQIE-IPN, Laboratorios Pesados de Metalurgia, UPALM, Zacatenco, C.P. 07738, Mexico D.F. (Mexico); Villagomez, A. [Construcciones Maritimas Mexicanas, CMM-PROTEXA, Av. Periferica s/n, Fracc. Lomas de Holche, C.P. 24120, Cd. del Carmen, Campeche (Mexico); Contreras, A. [Instituto Mexicano del Petroleo, Investigacion en Ductos, Corrosion y Materiales, Eje Central Lazaro Cardenas Norte 152 Col. San Bartolo Atepehuacan, C.P. 07730, Mexico D.F. (Mexico)], E-mail: acontrer@imp.mx

    2008-10-15T23:59:59.000Z

    This work presents the results of multiple weld repairs in the same area in seamless API X-52 microalloyed steel pipe. Four conditions of shielded metal arc welding repairs and one as-welded specimen of the girth weld were characterized to determine changes in the microstructure, grain size in the heat affected zone, and to evaluate their effect on the mechanical properties of the weld joints. The mechanical properties by means of tension tests, Charpy-V impact resistance and Vickers hardness of the welds were analyzed. The results indicate that significant changes are not generated in the microstructural constituents of the heat affected zone. Grain growth in the heat affected zone at the specimen mid-thickness with the number of repairs was observed. Tensile strength of the weld joints meets the requirement of the API 1104 standard even after the fourth weld repair. Significant reduction in Charpy-V impact resistance with the number of weld repairs was found when the notch location was in the intersection of the fusion line with the specimen mid-thickness. A significant increase in the Vickers hardness of the heat affected zone occurred after the first repair and a gradual decrease in the Vickers hardness occurred as the number of repairs increases.

  1. Fabrication Flaw Density and Distribution In Repairs to Reactor Pressure Vessel and Piping Welds

    SciTech Connect (OSTI)

    GJ Schuster, FA Simonen, SR Doctor

    2008-04-01T23:59:59.000Z

    The Pacific Northwest National Laboratory is developing a generalized fabrication flaw distribution for the population of nuclear reactor pressure vessels and for piping welds in U.S. operating reactors. The purpose of the generalized flaw distribution is to predict component-specific flaw densities. The estimates of fabrication flaws are intended for use in fracture mechanics structural integrity assessments. Structural integrity assessments, such as estimating the frequency of loss-of-coolant accidents, are performed by computer codes that require, as input, accurate estimates of flaw densities. Welds from four different reactor pressure vessels and a collection of archived pipes have been studied to develop empirical estimates of fabrication flaw densities. This report describes the fabrication flaw distribution and characterization in the repair weld metal of vessels and piping. This work indicates that large flaws occur in these repairs. These results show that repair flaws are complex in composition and sometimes include cracks on the ends of the repair cavities. Parametric analysis using an exponential fit is performed on the data. The relevance of construction records is established for describing fabrication processes and product forms. An analysis of these records shows there was a significant change in repair frequency over the years when these components were fabricated. A description of repair flaw morphology is provided with a discussion of fracture mechanics significance. Fabrication flaws in repairs are characterized using optimized-access, high-sensitivity nondestructive ultrasonic testing. Flaw characterizations are then validated by other nondestructive evaluation techniques and complemented by destructive testing.

  2. Please return this form to: Student Information Centre Room 112, The

    E-Print Network [OSTI]

    Auckland, University of

    /trainfares Vet Cell Phone Petrol/Parking Hair Cuts Internet/Email Photocopying Home Repairs Bank Fees Childcare

  3. DNA Repair Alterations in Children With Pediatric Malignancies: Novel Opportunities to Identify Patients at Risk for High-Grade Toxicities

    SciTech Connect (OSTI)

    Ruebe, Claudia E., E-mail: claudia.ruebe@uks.e [Department of Radiation Oncology, Saarland University, Homburg/Saar (Germany); Fricke, Andreas; Schneider, Ruth; Simon, Karin; Kuehne, Martin; Fleckenstein, Jochen [Department of Radiation Oncology, Saarland University, Homburg/Saar (Germany); Graeber, Stefan [Institute of Medical Biometrics, Epidemiology and Medical Informatics, Saarland University, Homburg/Saar (Germany); Graf, Norbert [Department of Pediatric Hematology and Oncology, Saarland University, Homburg/Saar (Germany); Ruebe, Christian [Department of Radiation Oncology, Saarland University, Homburg/Saar (Germany)

    2010-10-01T23:59:59.000Z

    Purpose: To evaluate, in a pilot study, the phosphorylated H2AX ({gamma}H2AX) foci approach for identifying patients with double-strand break (DSB) repair deficiencies, who may overreact to DNA-damaging cancer therapy. Methods and Materials: The DSB repair capacity of children with solid cancers was analyzed compared with that of age-matched control children and correlated with treatment-related normal-tissue responses (n = 47). Double-strand break repair was investigated by counting {gamma}H2AX foci in blood lymphocytes at defined time points after irradiation of blood samples. Results: Whereas all healthy control children exhibited proficient DSB repair, 3 children with tumors revealed clearly impaired DSB repair capacities, and 2 of these repair-deficient children developed life-threatening or even lethal normal-tissue toxicities. The underlying mutations affecting regulatory factors involved in DNA repair pathways were identified. Moreover, significant differences in mean DSB repair capacity were observed between children with tumors and control children, suggesting that childhood cancer is based on genetic alterations affecting DSB repair function. Conclusions: Double-strand break repair alteration in children may predispose to cancer formation and may affect children's susceptibility to normal-tissue toxicities. Phosphorylated H2AX analysis of blood samples allows one to detect DSB repair deficiencies and thus enables identification of children at risk for high-grade toxicities.

  4. CtIP tetramer assembly is required for DNA-end resection and repair

    E-Print Network [OSTI]

    Davies, Owen R.; Forment, Josep V.; Sun, Meidai; Belotserkovskaya, Rimma; Coates, Julia; Galanty, Yaron; Demir, Mukerrem; Morton, Christopher; Rzechorzek, Neil; Jackson, Stephen P.; Pellegrini, Luca

    2015-01-05T23:59:59.000Z

    1     CtIP tetramer assembly is required for DNA-end resection and repair Owen R. Davies1,4*, Josep V. Forment1,2,3*, Meidai Sun1, Rimma Belotserkovskaya1,2, Julia Coates1,2, Yaron Galanty1,2, Mukerrem Demir1,2, Christopher Morton1... that a CtIP tetramer architecture is essential for effective DSB repair by homologous recombination. Keywords CtIP/RBBP8, double-strand DNA break repair, DNA-end resection, gene conversion, homologous recombination. 3...

  5. Functional Characterization of Kansl2 and Its Role in Mitochondrial DNA Repair and Maintenance

    E-Print Network [OSTI]

    Liau, Wei-Siang

    2012-01-01T23:59:59.000Z

    understanding of the maintenance and repair of the mtDNA,A is necessary for mtDNA maintenance and embryogenesis in1997). Mitochondrial DNA maintenance in vertebrates. Annu

  6. GENETIC AND MOLECULAR ANALYSIS OF DNA DAMAGE REPAIR AND TOLERANCE PATHWAYS.

    SciTech Connect (OSTI)

    SUTHERLAND, B.M.

    2001-07-26T23:59:59.000Z

    Radiation can damage cellular components, including DNA. Organisms have developed a panoply of means of dealing with DNA damage. Some repair paths have rather narrow substrate specificity (e.g. photolyases), which act on specific pyrimidine photoproducts in a specific type (e.g., DNA) and conformation (double-stranded B conformation) of nucleic acid. Others, for example, nucleotide excision repair, deal with larger classes of damages, in this case bulky adducts in DNA. A detailed discussion of DNA repair mechanisms is beyond the scope of this article, but one can be found in the excellent book of Friedberg et al. [1] for further detail. However, some DNA damages and paths for repair of those damages important for photobiology will be outlined below as a basis for the specific examples of genetic and molecular analysis that will be presented below.

  7. Plug repairs of marine glass fiber / vinyl ester laminates subjected to uniaxial tension

    E-Print Network [OSTI]

    Michelis, Alexandros

    2009-01-01T23:59:59.000Z

    Glass fiber/vinyl ester composite laminates are currently being used and proposed for the hulls, bulkheads, and superstructures of large ships. This thesis examines the effectiveness of the repair of such laminates using ...

  8. Review of Maintenance and Repair Times for Components in Technological Facilities

    SciTech Connect (OSTI)

    L. C. Cadwallader

    2012-11-01T23:59:59.000Z

    This report is a compilation of some unique component repair time data and it also presents citations of more extensive reports where lists of repair times can be found. This collection of information should support analysts who seek to quantify maintainability and availability of high technology and nuclear energy production systems. While there are newer sources of repair time information, most, if not all, of the newer sources are proprietary and cannot be shared. This report offers data that, while older, is openly accessible and can serve as reasonable estimates of repair times, at least for initial studies. Some times were found for maintenance times in radiation environments, and some guidance for multiplicative factors to use to account for work in contamination areas.

  9. Modeling and centralization of strategic inventory for repairable and long lead-time spare parts

    E-Print Network [OSTI]

    Duncan, Tyeliah Elaine

    2011-01-01T23:59:59.000Z

    This thesis develops an optimal inventory model for repairable and long leadtime spare parts for an Engine overhaul business. In addition, it presents a business case for centralization of inventory. Pratt & Whitney purchased ...

  10. Emerging Trends in Heart Valve Engineering: Part III. Novel Technologies for Mitral Valve Repair and Replacement

    E-Print Network [OSTI]

    2015-01-01T23:59:59.000Z

    and J. D. Puskas. Mitral-valve repair versus replacement forbioprosthetic heart valves. Ann. Thorac. Surg. 71:S417–mechanics of arti?cial heart valves. Clin. Exp. Pharmacol.

  11. Tiny Terminators: New Micro-Robots Assemble, Repair Themselves and Are Surprisingly Strong

    Broader source: Energy.gov [DOE]

    Tiny robots that can assemble and repair themselves? Watch a video of Argonne National Laboratory's micro-robots that easily perform tasks that can challenge other robots, including moving objects that are larger than themselves.

  12. Consistency Management with Repair Actions Christian Nentwich, Wolfgang Emmerich and Anthony Finkelstein

    E-Print Network [OSTI]

    van der Hoek, André

    Consistency Management with Repair Actions Christian Nentwich, Wolfgang Emmerich and Anthony Finkelstein Department of Computer Science University College London Gower Street, London WC1E 6BT, UK {c.nentwich,w.emmerich

  13. Use of CFRP Overlays to Repair Fatigue Damage in Steel Bridge Girders and Components

    E-Print Network [OSTI]

    Gangel, Regan Elisabeth

    2012-05-31T23:59:59.000Z

    Fatigue damage in steel girder bridges built prior to the mid-1980s is common due to distortion-induced fatigue. Different repair techniques have been developed and implemented to retrofit bridges of this era with existing fatigue damage...

  14. Community-Minded Interns at Savannah River Site Help Area Residents in Need with Home Repairs

    Broader source: Energy.gov [DOE]

    AIKEN, S.C. – More than two dozen college interns who worked at the Savannah River Site (SRS) this summer joined other volunteers and headed into area neighborhoods to help people in need with home repairs.

  15. RESTORING A DAMAGED 16-YEAR -OLD INSULATING POLYMER CONCRETE DIKE OVERLAY: REPAIR MATERIALS AND TECHNOLOGIES.

    SciTech Connect (OSTI)

    SUGAMA,T.

    2007-01-01T23:59:59.000Z

    The objective of this program was to design and formulate organic polymer-based material systems suitable for repairing and restoring the overlay panels of insulating lightweight polymer concrete (ILPC) from the concrete floor and slope wall of a dike at KeySpan liquefied natural gas (LNG) facility in Greenpoint, Brooklyn, NY, just over sixteen years ago. It also included undertaking a small-scale field demonstration to ensure that the commercial repairing technologies were applicable to the designed and formulated materials.

  16. Endovascular Abdominal Aortic Aneurysm Repair in the Presence of a Kidney Transplant: Therapeutic Considerations

    SciTech Connect (OSTI)

    Karkos, Christos D., E-mail: ckarkos@hotmail.com; McMahon, Greg [Leicester Royal Infirmary, Department of Vascular and Endovascular Surgery (United Kingdom); Fishwick, Guy [Leicester Royal Infirmary, Department of Radiology (United Kingdom); Lambert, Kelly; Bagga, Ajay; McCarthy, Mark J. [Leicester Royal Infirmary, Department of Vascular and Endovascular Surgery (United Kingdom)

    2006-04-15T23:59:59.000Z

    Abdominal aortic aneurysm (AAA) repair in the presence of a kidney transplant can be extremely challenging, as it carries significant risks of renal ischemia. Endovascular repair is an attractive option, as it can be performed with little or no impairment of renal arterial flow. We describe the endovascular management of a recurrent AAA in a patient with a functioning renal transplant using a custom-made aorto-uni-iliac device. We discuss the planning and the potential problems of the technique.

  17. In situ repair of a failed compression fitting

    DOE Patents [OSTI]

    Wolbert, R.R.; Jandrasits, W.G.

    1985-08-05T23:59:59.000Z

    A method and apparatus for the in situ repair of a failed compression fitting is provided. Initially, a portion of a guide tube is inserted coaxially in the bore of the compression fitting and locked therein. A close fit dethreading device is then coaxially mounted on the guide tube to cut the threads from the fitting. Thereafter, the dethreading device and guide tube are removed and a new fitting is inserted onto the dethreaded fitting with the body of the new fitting overlaying the dethreaded portion. Finally, the main body of the new fitting is welded to the main body of the old fitting whereby a new threaded portion of the replacement fitting is precisely coaxial with the old threaded portion. If needed, a bushing is located on the dethreaded portion which is sized to fit snugly between the dethreaded portion and the new fitting. Preferably, the dethreading device includes a cutting tool which is moved incrementally in a radial direction whereby the threads are cut from the threaded portion of the failed fitting in increments.

  18. In situ repair of a failed compression fitting

    DOE Patents [OSTI]

    Wolbert, Ronald R. (McKees Rocks, PA); Jandrasits, Walter G. (Pittsburgh, PA)

    1986-01-01T23:59:59.000Z

    A method and apparatus for the in situ repair of a failed compression fitg is provided. Initially, a portion of a guide tube is inserted coaxially in the bore of the compression fitting and locked therein. A close fit dethreading device is then coaxially mounted on the guide tube to cut the threads from the fitting. Thereafter, the dethreading device and guide tube are removed and a new fitting is inserted onto the dethreaded fitting with the body of the new fitting overlaying the dethreaded portion. Finally, the main body of the new fitting is welded to the main body of the old fitting whereby a new threaded portion of the replacement fitting is precisely coaxial with the old threaded portion. If needed, a bushing is located on the dethreaded portion which is sized to fit snugly between the dethreaded portion and the new fitting. Preferably, the dethreading device includes a cutting tool which is moved incrementally in a radial direction whereby the threads are cut from the threaded portion of the failed fitting in increments.

  19. Remote Welding, NDE and Repair of DOE Standardized Canisters

    SciTech Connect (OSTI)

    Eric Larsen; Art Watkins; Timothy R. McJunkin; Dave Pace; Rodney Bitsoi

    2006-05-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) created the National Spent Nuclear Fuel Program (NSNFP) to manage DOE’s spent nuclear fuel (SNF). One of the NSNFP’s tasks is to prepare spent nuclear fuel for storage, transportation, and disposal at the national repository. As part of this effort, the NSNFP developed a standardized canister for interim storage and transportation of SNF. These canisters will be built and sealed to American Society of Mechanical Engineers (ASME) Section III, Division 3 requirements. Packaging SNF usually is a three-step process: canister loading, closure welding, and closure weld verification. After loading SNF into the canisters, the canisters must be seal welded and the welds verified using a combination of visual, surface eddy current, and ultrasonic inspection or examination techniques. If unacceptable defects in the weld are detected, the defective sections of weld must be removed, re-welded, and re-inspected. Due to the high contamination and/or radiation fields involved with this process, all of these functions must be performed remotely in a hot cell. The prototype apparatus to perform these functions is a floor-mounted carousel that encircles the loaded canister; three stations perform the functions of welding, inspecting, and repairing the seal welds. A welding operator monitors and controls these functions remotely via a workstation located outside the hot cell. The discussion describes the hardware and software that have been developed and the results of testing that has been done to date.

  20. Employment of volume-based user fees in rural drop-off collection systems for solid waste: Six case studies

    SciTech Connect (OSTI)

    Park, W.M.

    1995-09-01T23:59:59.000Z

    While volume-based user fees (VBUFs) may not be the most appropriate financing strategy for all rural areas, the experience of these rural counties and towns warrants the following inclusions. Implementation of VBUFs in a rural drop-off context appears feasible across a wide range of geographic and demographic conditions, as well as a wide range of system characteristics, without prohibitive administrative problems or costs. Most residents appear willing to support (or at least accept) VBUFs if they are well-informed of the need and logic in advance, and given reasonable options for gaining some measure of control over their total bill. Hybrid financing strategies allow per bag fees to be kept at modest levels. Support comes more easily if VBUFs are initiated at the time of a significant enhancement of the collection system. VBUFs within rural drop-off collection systems appear capable of motivating relatively high levels of participation in the separation of recyclables, and thus contributing to relatively high per capita generation rates for typical recyclables and county-wide diversion or recovery rates. At least minor problems with increased illegal dumping and burning can be expected, but a show of willingness to enforce ordinances against such practices can lead to fairly quick subsidence.

  1. INTERNAL REPAIR OF GAS PIPLINES SURVEY OF OPERATOR EXPERIENCE AND INDUSTRY NEEDS REPORT

    SciTech Connect (OSTI)

    Ian D. Harris

    2003-09-01T23:59:59.000Z

    A repair method that can be applied from the inside of a gas transmission pipeline (i.e., a trenchless repair) is an attractive alternative to conventional repair methods since the need to excavate the pipeline is precluded. This is particularly true for pipelines in environmentally sensitive and highly populated areas. The objectives of the project are to evaluate, develop, demonstrate, and validate internal repair methods for pipelines; develop a functional specification for an internal pipeline repair system; and prepare a recommended practice for internal repair of pipelines. The purpose of this survey is to better understand the needs and performance requirements of the natural gas transmission industry regarding internal repair. A total of fifty-six surveys were sent to pipeline operators. A total of twenty completed surveys were returned, representing a 36% response rate, which is considered very good given the fact that tailored surveys are known in the marketing industry to seldom attract more than a 10% response rate. The twenty survey responses produced the following principal conclusions: (1) Use of internal weld repair is most attractive for river crossings, under other bodies of water (e.g., lakes and swamps) in difficult soil conditions, under highways, under congested intersections, and under railway crossings. All these areas tend to be very difficult and very costly if, and where, conventional excavated repairs may be currently used. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling (HDD) when a new bore must be created to solve a leak or other problem in a water/river crossing. (3) The typical travel distances required can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). In concept, these groups require pig-based systems; despooled umbilical systems could be considered for the first two groups. For the last group a self-propelled system with an onboard self-contained power and welding system is required. (4) Pipe size range requirements range from 50.8 mm (2 in.) through 1,219.2 mm (48 in.) in diameter. The most common size range for 80% to 90% of operators surveyed is 508 mm to 762 mm (20 in. to 30 in.) diameter, with 95% using 558.8 mm (22 in.) diameter pipe.

  2. Development of bonded composite doublers for the repair of oil recovery equipment.

    SciTech Connect (OSTI)

    Roach, David W.; Rackow, Kirk A.

    2005-06-01T23:59:59.000Z

    An unavoidable by-product of a metallic structure's use is the appearance of crack and corrosion flaws. Economic barriers to the replacement of these structures have created an aging infrastructure and placed even greater demands on efficient and safe repair methods. In the past decade, an advanced composite repair technology has made great strides in commercial aviation use. Extensive testing and analysis, through joint programs between the Sandia Labs FAA Airworthiness Assurance Center and the aviation industry, have proven that composite materials can be used to repair damaged aluminum structure. Successful pilot programs have produced flight performance history to establish the durability of bonded composite patches as a permanent repair on commercial aircraft structures. With this foundation in place, this effort is adapting bonded composite repair technology to civil structures. The use of bonded composite doublers has the potential to correct the difficulties associated with current repair techniques and the ability to be applied where there are no rehabilitation options. It promises to be cost-effective with minimal disruption to the users of the structure. This report concludes a study into the application of composite patches on thick steel structures typically used in mining operations. Extreme fatigue, temperature, erosive, and corrosive environments induce an array of equipment damage. The current weld repair techniques for these structures provide a fatigue life that is inferior to that of the original plate. Subsequent cracking must be revisited on a regular basis. The use of composite doublers, which do not have brittle fracture problems such as those inherent in welds, can help extend the structure's fatigue life and reduce the equipment downtime. Two of the main issues for adapting aircraft composite repairs to civil applications are developing an installation technique for carbon steel and accommodating large repairs on extremely thick structures. This study developed and proved an optimum field installation process using specific mechanical and chemical surface preparation techniques coupled with unique, in-situ heating methods. In addition, a comprehensive performance assessment of composite doubler repairs was completed to establish the viability of this technology for large, steel structures. The factors influencing the durability of composite patches in severe field environments were evaluated along with related laminate design issues.

  3. Apparel, Merchandising, and Design Major College of Human Sciences

    E-Print Network [OSTI]

    Lin, Zhiqun

    Elective 3 Elective 3 Total 15 Total 17 Fall Spring TC 415, Technical Design Processes 3 TC 305, Quality Science 4 Total 12.5 Total 16 Fall Spring TC 245, Aesthetics and Brand Image 3 TC Humanities Elective (TC and Internship Prep 1 Total 17 Total 17 Fall Spring TC 372, Sourcing & Global Issues 3 TC 321, Apparel Technology

  4. Specification buying as it relates to private brand merchandising

    E-Print Network [OSTI]

    Tarver, Cleo B

    1964-01-01T23:59:59.000Z

    of Census uses the number four as a minimum, 2 ~ A retail ostablishment may be defined as a single or separate place of business, princ1- pa' ly engaged i. n the performance of marketing functions& wherein or out of whioh sales are made primarily...- tegic position ocoupied by the wholesaler, For many years pri. or to the Civil Var and especially during the Recon- struction period following the Var, the control of sales usually rested with the wholesaler who dominated the scene as financier...

  5. General Merchandise 50% Energy Savings Technical Support Document 2009 |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpenEnergy InformationOpen

  6. The University of Stirling Vietnam Award This award offers a fee waiver of 1,000 for the first year and 500 for years two,

    E-Print Network [OSTI]

    Little, Tony

    The University of Stirling Vietnam Award This award offers a fee waiver of £1,000 for the first-time undergraduate or postgraduate (taught or research) degree. The University of Stirling wishes to offer this award at Stirling and add to our already diverse international community on campus. Students do not have to apply

  7. Two PhD studentships Payment of Home/EU Fees and a stipend of 20,000 per annum for 3 years

    E-Print Network [OSTI]

    Two PhD studentships Payment of Home/EU Fees and a stipend of £20,000 per annum for 3 years We are offering two PhD studentships in improvement science. The first PhD focuses upon healthcare improvement methodology and the second PhD will address quality and safety of prescribing practice. These exciting three

  8. Endowment and Gift Fee Statement A long-term goal of The Georgia Southern University Foundation 501(c)(3) is to build the institution's

    E-Print Network [OSTI]

    Hutcheon, James M.

    their operations, according to the results of a CASE survey on foundation funding sources and budget restructuring found to be underfunded in terms of operations. A major goal is to build the infrastructure needed structure to cover operations essential to the Foundation's overall operation. These fees were introduced

  9. Relocation and repair of the National Geotechnical Centrifuge. Final report

    SciTech Connect (OSTI)

    Cheney, J.A. [California Univ., Davis, CA (United States). Center for Geotechnical Modeling

    1994-10-01T23:59:59.000Z

    In January of 1984, the large geotechnical centrifuge located at NASA Ames Research Center, was in the first stages of operational checkout when the main thrust bearing of the large D.C. drive motor failed. After many months of investigation and proposals for repair of the facility, it became evident that it would be far more advantageous to the engineering community to remove those components of the centrifuge that were undamaged to the Davis campus and replace the drive system completely. The large centrifuge had cost over 2 million dollars to build, and it would have been irresponsible to simply scrap it. Recognizing this fact, funds were solicited and received from various sources, and Beam Engineering Inc. was contracted to design and construct the centrifuge at its new location. The University of California contributed a quarter of a million dollars and Tyndall Air Force Base, through Los Alamos National Laboratory, contributed $140,000. There were funds also contributed by LANL, LLNL, US Navy and NSF. The first stage in the phased development of the newly located centrifuge is nearing completion, which prompts the writing of this report. By the time that this report reaches the reader the first runs of the centrifuge will have been completed. The present report describes the present capability of the centrifuge and the plans for upgrading as time goes on. Several pilot studies were carried out. The experiments involved (1) the effects of nearby explosions on buried thin walled containers and (2) the advection and dispersion of toxic waste water through soils.

  10. WHERE MULTIFUNCTIONAL DNA REPAIR PROTEINS MEET: MAPPING THE INTERACTION DOMAINS BETWEEN XPG AND WRN

    SciTech Connect (OSTI)

    Rangaraj, K.; Cooper, P.K.; Trego, K.S.

    2009-01-01T23:59:59.000Z

    The rapid recognition and repair of DNA damage is essential for the maintenance of genomic integrity and cellular survival. Multiple complex and interconnected DNA damage responses exist within cells to preserve the human genome, and these repair pathways are carried out by a specifi c interplay of protein-protein interactions. Thus a failure in the coordination of these processes, perhaps brought about by a breakdown in any one multifunctional repair protein, can lead to genomic instability, developmental and immunological abnormalities, cancer and premature aging. This study demonstrates a novel interaction between two such repair proteins, Xeroderma pigmentosum group G protein (XPG) and Werner syndrome helicase (WRN), that are both highly pleiotropic and associated with inherited genetic disorders when mutated. XPG is a structure-specifi c endonuclease required for the repair of UV-damaged DNA by nucleotide excision repair (NER), and mutations in XPG result in the diseases Xeroderma pigmentosum (XP) and Cockayne syndrome (CS). A loss of XPG incision activity results in XP, whereas a loss of non-enzymatic function(s) of XPG causes CS. WRN is a multifunctional protein involved in double-strand break repair (DSBR), and consists of 3’–5’ DNA-dependent helicase, 3’–5’ exonuclease, and single-strand DNA annealing activities. Nonfunctional WRN protein leads to Werner syndrome, a premature aging disorder with increased cancer incidence. Far Western analysis was used to map the interacting domains between XPG and WRN by denaturing gel electrophoresis, which separated purifi ed full length and recombinant XPG and WRN deletion constructs, based primarily upon the length of each polypeptide. Specifi c interacting domains were visualized when probed with the secondary protein of interest which was then detected by traditional Western analysis using the antibody of the secondary protein. The interaction between XPG and WRN was mapped to the C-terminal region of XPG as well as the C-terminal region of WRN. The physical interaction between XPG and WRN links NER, (made evident by the disease XP) with DSBR, which imparts additional knowledge of the overlapping nature of these two proteins and the previously distinct DNA repair pathways they are associated with. Since genomic integrity is constantly threatened by both endogenous and exogenous (internal and external) damage, understanding the roles of these proteins in coordinating DNA repair processes with replication will signifi cantly further understanding how defects instigate physiological consequences in response to various DNA damaging sources. This ultimately contributes to our understanding of cancer and premature aging.

  11. HANFORD SITE LOW EXPOSURE PIPELINE REPAIR USING A NON-METALLIC COMPOSITE SYSTEM

    SciTech Connect (OSTI)

    HUTH RJ

    2009-11-12T23:59:59.000Z

    At the Department of Energy, Richland Operations (DOE-RL) Hanford site in eastern Washington, a 350 mm (14 inch) diameter high density polyethylene (HDPE) pump recirculation pipeline failed at a bonded joint adjacent to a radiologically and chemically contaminated groundwater storage basin. The responsible DOE-RL contractor, CH2MHill Plateau Remediation Company, applied a fiberglass reinforced plastic (composite) field repair system to the failed joint. The system was devised specifically for the HDPE pipe repair at the Hanford site, and had not been used on this type of plastic piping previously. This paper introduces the pipe failure scenario, describes the options considered for repair and discusses the ultimate resolution of the problem. The failed pipeline was successfully returned to service with minimal impact on waste water treatment plant operating capacity. Additionally, radiological and chemical exposures to facility personnel were maintained as low as reasonably achievable (ALARA). The repair is considered a success for the near term, and future monitoring will prove whether the repair can be considered for long term service and as a viable alternative for similar piping failures at the Hanford site.

  12. A survey of repair practices for nuclear power plant containment metallic pressure boundaries

    SciTech Connect (OSTI)

    Oland, C.B.; Naus, D.J. [Oak Ridge National Lab., TN (United States)

    1998-05-01T23:59:59.000Z

    The Nuclear Regulatory Commission has initiated a program at the Oak Ridge National Laboratory to provide assistance in their assessment of the effects of potential degradation on the structural integrity and leaktightness of metal containment vessels and steel liners of concrete containments in nuclear power plants. One of the program objectives is to identify repair practices for restoring metallic containment pressure boundary components that have been damaged or degraded in service. This report presents issues associated with inservice condition assessments and continued service evaluations and identifies the rules and requirements for the repair and replacement of nonconforming containment pressure boundary components by welding or metal removal. Discussion topics include base and welding materials, welding procedure and performance qualifications, inspection techniques, testing methods, acceptance criteria, and documentation requirements necessary for making acceptable repairs and replacements so that the plant can be returned to a safe operating condition.

  13. Evaluation of bisphenol E cyanate ester for the resin-injection repair of advanced composites

    SciTech Connect (OSTI)

    Wilber Yaote Lio

    2009-12-19T23:59:59.000Z

    This thesis is a compilation of a general introduction and literature review that ties together the subsequent chapters which consist of two journal articles that have yet to be submitted for publication. The overall topic relates to the evaluation and application of a new class of cyanate ester resin with unique properties that lend it applicable to use as a resin for injection repair of high glass transition temperature polymer matrix composites. The first article (Chapter 2) details the evaluation and optimization of adhesive properties of this cyanate ester and alumina nanocomposites under different conditions. The second article (Chapter 3) describes the development and evaluation of an injection repair system for repairing delaminations in polymer matrix composites.

  14. Automatic coke oven heating control system at Burns Harbor for normal and repair operation

    SciTech Connect (OSTI)

    Battle, E.T.; Chen, K.L. [Bethlehem Steel Corp., Burns Harbor, IN (United States); [Bethlehem Steel Corp., PA (United States)

    1997-12-31T23:59:59.000Z

    An automatic heating control system for coke oven batteries was developed in 1985 for the Burns Harbor No. 1 battery and reported in the 1989 Ironmaking Conference Proceedings. The original system was designed to maintain a target coke temperature at a given production level under normal operating conditions. Since 1989, enhancements have been made to this control system so that it can also control the battery heating when the battery is under repair. The new control system has improved heating control capability because it adjusts the heat input to the battery in response to anticipated changes in the production schedule. During a recent repair of this 82 oven battery, the pushing schedule changed from 102 ovens/day to 88 ovens/day, then back to 102 ovens/day, then to 107 ovens/day. During this repair, the control system was able to maintain the coke temperature average standard deviation at 44 F, with a maximum 75 F.

  15. Hurricane-damaged Gulf of Mexico pipeline repaired with cold forging

    SciTech Connect (OSTI)

    Lewis, G. (Texaco Pipeline Inc., Houma, LA (United States)); DeGruy, P. (Texaco Inc., New Orleans, LA (United States)); Avery, L. (Big Inch Marine Systems Inc., Lafayette, LA (United States))

    1993-05-03T23:59:59.000Z

    Damage to Texaco Pipeline Inc.'s Eugene Island Pipeline System (EIPS) in last year's Hurricane Andrew prompted a complex repair project unique for the Gulf of Mexico. Damage, suffered when the anchor of a runaway semisubmersible drilling rig crashed into the 20-in. EPIS during the height of the storm, caused the pipeline to fail under pressure within 48 hr. after start-up following the storm. The paper describes the importance of the EIPS; system safety; Andrew's damage; locating the leak; repair options; the chosen system; mechanical bonding; end connectors and ball flanges; and diving operations.

  16. Bosh repairs No. 3 blast furnace, Edgar Thomson Plant Mon Valley Works

    SciTech Connect (OSTI)

    Stoupis, M.G.

    1993-01-01T23:59:59.000Z

    The paper describes in detail the steps taken from quenching to dry out of the furnace to repair the bosh area of the No.3 blast furnace. Inspection of the area revealed that there was no brick anywhere in the bosh. Brick in the tuyere breast area had been peeled back to reveal the steel plate, and descaling revealed 14 pipes fully exposed. None were leaking, but one seemed badly deteriorated. Conventional repairs could not take place before the scheduled blow-in. Installation of coolers were instead tried.

  17. Remote reactor repair: GTA (gas tungsten Arc) weld cracking caused by entrapped helium

    SciTech Connect (OSTI)

    Kanne, W.R. Jr.

    1988-01-01T23:59:59.000Z

    A repair patch was welded to the wall of a nuclear reactor tank using remotely controlled thirty-foot long robot arms. Further repair was halted when gas tungsten arc (GTA) welds joining type 304L stainless steel patches to the 304 stainless steel wall developed toe cracks in the heat-affected zone (HAZ). The role of helium in cracking was investigated using material with entrapped helium from tritium decay. As a result of this investigation, and of an extensive array of diagnostic tests performed on reactor tank wall material, helium embrittlement was shown to be the cause of the toe cracks.

  18. Mitral Web -A New Concept for Mitral Valve Repair: Improved Engineering Design and In-Vitro Studies

    E-Print Network [OSTI]

    Pekkan, Kerem

    Mitral Web - A New Concept for Mitral Valve Repair: Improved Engineering Design and In of Biomedical Engineering, Georgia Institute of Technology, GA, USA Myxomatous mitral valve disease is currently reported that mitral valve repair is preferable to valve replace- ment, as it offers certain advantages

  19. Restoration and repair of 30-year old cooling towers at the Paducah Gaseous Diffusion Plant, Phase I. Draft 1

    SciTech Connect (OSTI)

    Shelton, M.F.

    1985-01-01T23:59:59.000Z

    Early in 1980, a comprehensive reliability study was made to ascertain the ability of the present 30-year old recirculating water system to meet the anticipated load demand through the year 2000. The findings and recommendations of this study were used as a guide to schedule uprating and repairs. This paper deals with the underground distribution system and cooling tower repairs.

  20. The Role of Nucleotide Excision Repair in Restoring Replication Following UV-Induced Damage in Escherichia coli

    E-Print Network [OSTI]

    Courcelle, Justin

    The Role of Nucleotide Excision Repair in Restoring Replication Following UV-Induced Damage DNA synthesis in the absence of nucleotide excision repair does not promote cell survivalA mutants....................... 26 Following low doses of UV irradiation cells lacking nucleotide excision

  1. Hot repair of ceramic burner on hot blast stoves at USS/Kobe`s {number_sign}3 blast furnace

    SciTech Connect (OSTI)

    Bernarding, T.F.; Chemorov, M.; Shimono, S.; Phillips, G.R.

    1997-12-31T23:59:59.000Z

    During the 1992 reline of the No. 3 blast furnace, three new stoves were constructed. The design of the stoves, equipped with internal ceramic burners, was for providing a hot blast temperature of 2,000 F at a wind rate of 140,000 SCFM. After 3 years the performance had deteriorated so the burners were cleaned. When a second cleaning did not improve the performance of No. 3 blast furnace, it was decided to repair the refractory while still hot. The paper describes the hot repair procedures, taking a stove off for repairs, maintenance heat up during repairs, two stove operation, stove commissioning, repair of a ceramic burner, and wet gas prevention.

  2. Toward a State of Good Repair for Railroad Bridges through Structural Health Monitoring

    E-Print Network [OSTI]

    Bustamante, Fabián E.

    Toward a State of Good Repair for Railroad Bridges through Structural Health Monitoring NUTC of this research is to add a new tool to the asset management toolbox: structural health monitoring, particularly is Structural Health Monitoring (SHM)? SHM is process of intelligently collecting data from sensors on critical

  3. Multilayer sulfur-resistant composite metal membranes and methods of making and repairing the same

    DOE Patents [OSTI]

    Way, J. Douglas; Hatlevik, Oyvind

    2014-07-15T23:59:59.000Z

    The invention relates to thin, hydrogen-permeable, sulfur-resistant membranes formed from multi-layers of palladium or palladium-alloy coatings on porous, ceramic or metal supports, methods of making these membranes, methods of repairing layers of these membranes and devices that incorporate these membranes.

  4. Development/Plasticity/Repair Deletion of ERK2 Mitogen-Activated Protein Kinase

    E-Print Network [OSTI]

    Development/Plasticity/Repair Deletion of ERK2 Mitogen-Activated Protein Kinase Identifies Its Key University, Piscataway, New Jersey 08855-8082 The mitogen-activated protein (MAP) kinases ERK1 and ERK2-specific functions in vivo. We have examined the role of ERK2 in neural development by conditional inactivation

  5. Development/Plasticity/Repair The ERK2 Mitogen-Activated Protein Kinase Regulates the

    E-Print Network [OSTI]

    Development/Plasticity/Repair The ERK2 Mitogen-Activated Protein Kinase Regulates the Timing Oligodendrocytedevelopmentistightlycontrolledbyavarietyofextracellulargrowthanddifferentiationfactors.Themitogen-activated protein kinases (MAPKs), ERK1 and ERK2, are critical intracellular signaling (ERKs) are ubiquitously expressed, coordinately regulated, and highly similar, but Erk2 deletion in mice

  6. Development/Plasticity/Repair Phosphatidylinositol 3-Kinase Activates ERK in Primary

    E-Print Network [OSTI]

    Clapham, David E.

    Development/Plasticity/Repair Phosphatidylinositol 3-Kinase Activates ERK in Primary Sensory activation to inflammatory pain. We further investigated the correlationbetweenthePI3KandtheERK294002 and wortmannin, indicative of the activation of PI3K by both agents. ERK activation by capsaicin

  7. Development/Plasticity/Repair Disrupted ERK Signaling during Cortical Development Leads

    E-Print Network [OSTI]

    Development/Plasticity/Repair Disrupted ERK Signaling during Cortical Development Leads to Abnormal disorders arising from copy number variations in the ERK (extracellular signal-regulated kinase) MAP that these changes are due to ERK-dependent dysregulation of cyclin D1 and p27Kip1 , resulting in cell cycle

  8. Lazy Means Smart: Reducing Repair Bandwidth Costs in Erasure-coded Distributed Storage

    E-Print Network [OSTI]

    Alvisi, Lorenzo

    ,10)-encoded storage in this system results in hundreds of terabytes of daily recovery traffic through Top- Of an energy-conserving, storage-efficient, hybrid hadoop compute cluster. In Proceedings of the 2010Lazy Means Smart: Reducing Repair Bandwidth Costs in Erasure-coded Distributed Storage Mark

  9. FFaacciilliittiieess MMaannaaggeemmeenntt//EEnnvviirroonnmmeennttaall HHeeaalltthh && SSaaffeettyy Hazardous Work Area/Equipment Repair Form

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    Hazardous Work Area/Equipment Repair Form Form Instructions: Client is responsible for completing this form to assure that equipment and/or immediate work areas are not contaminated with any hazardous materials, tissue, etc.) Do Safety Hazards exist in the work area? N ___ Y ___ (Electrical, burn, or trip hazards

  10. Fast Interactive Simulations of Mitral Valve Repair Neil A. Tenenholtz, Peter E. Hammer, Robert D. Howe

    E-Print Network [OSTI]

    Fast Interactive Simulations of Mitral Valve Repair Neil A. Tenenholtz, Peter E. Hammer, Robert D. Howe Keywords: Surgical simulation, human-computer interaction, haptics, mitral valve, cardiac surgery. I. Problem Solved A healthy mitral valve ensures the one-way flow of oxygenated blood from the left

  11. Repair and Replacement projects help FM to honor its commitment to

    E-Print Network [OSTI]

    Gulliver, Robert

    of the University. Services provided fall into three major categories: preventive maintenance, routine repairs friendly power. Energy Management is continually recognized for the superior maintenance. · Maintenance (www.facm.umn. edu/services/maintenance.html) Maintenance Operations preserves the physical assets

  12. Home Maintenance and Repair Owning a home is a major responsibility.

    E-Print Network [OSTI]

    maintenance is conducted. Regular, preventive maintenance can pay off in peace of mind, utility cost savings, routine maintenance helps to prolong the life of the home and may prevent the need for major repairs of Benjamin Franklin, "An ounce of prevention is worth a pound of cure." Regular, routine maintenance enhances

  13. Investigation of Corrosion Damage and Repair System in a Concrete Jetty Structure

    E-Print Network [OSTI]

    Mobasher, Barzin

    Investigation of Corrosion Damage and Repair System in a Concrete Jetty Structure Farid Moradi of the deterioration was reinforcement corrosion, which initiated within few years after the completion of the jetty structure. The structure underwent major corrosion rehabilitation after 7 years of service. Despite the use

  14. Development/Plasticity/Repair The Bone Morphogenetic Protein Roof Plate Chemorepellent

    E-Print Network [OSTI]

    Butler, Samantha

    Development/Plasticity/Repair The Bone Morphogenetic Protein Roof Plate Chemorepellent Regulates, Toronto, Ontario, Canada M5G 1X8 Commissural spinal axons extend away from the roof plate (RP) in response to the dorsal midline and are generated by the bone morphogenetic proteins (BMPs) in the roof plate (RP) (Liem

  15. Development/Plasticity/Repair A Structural MRI Study of Human Brain Development from

    E-Print Network [OSTI]

    Utah, University of

    Development/Plasticity/Repair A Structural MRI Study of Human Brain Development from Birth to 2 Carolina, Chapel Hill, North Carolina 27599-7510 Brain development in the first 2 years after birth and schizophrenia. Knowledge regarding this period is currently quite limited. We studied structural brain

  16. Efficacy of Low Level Laser Therapy After Hand Flexor Tendon Repair

    SciTech Connect (OSTI)

    Ayad, K. E.; Abd El Mejeed, S. F. [Faculty of Physical Therapy, Cairo University (Egypt); El Gohary, H. M.; Abd Elrahman, M.; Bekheet, A. B. [Al Sahel Teaching Hospital, Cairo (Egypt)

    2009-09-27T23:59:59.000Z

    Flexor tendon injury is a common problem requiring suturing repair followed by early postoperative mobilization. Muscle atrophy, joint stiffness, osteoarthritis, infection, skin necrosis, ulceration of joint cartilage and tendocutaneous adhesion are familiar complications produced by prolonged immobilization of surgically repaired tendon ruptures. The purpose of this study was to clarify the importance of low level laser therapy after hand flexor tendon repair in zone II. Thirty patients aging between 20 and 40 years were divided into two groups. Patients in group A (n = 15) received a conventional therapeutic exercise program while patients in group B (n = 15) received low level laser therapy combined with the same therapeutic exercise program. The results showed a statistically significant increase in total active motion of the proximal and distal interphalangeal joints as well as maximum hand grip strength at three weeks and three months postoperative, but improvement was more significant in group B. It was concluded that the combination of low level laser therapy and early therapeutic exercises was more effective than therapeutic exercises alone in improving total active motion of proximal and distal interphalangeal joints and hand grip strength after hand flexor tendon repair.

  17. Provably Repairing the ISO/IEC 9798 Standard for Entity Authentication

    E-Print Network [OSTI]

    Basin, David

    , or authentication of transmitted data [27,33]. The ISO (International Organization for Standardization) and IECProvably Repairing the ISO/IEC 9798 Standard for Entity Authentication David Basin, Cas Cremers the family of entity authentication protocols defined by the ISO/IEC 9798 standard and find numerous

  18. Provably Repairing the ISO/IEC 9798 Standard for Entity Authentication

    E-Print Network [OSTI]

    Basin, David

    (International Organization for Standardization) and IEC (Interna- tional Electrotechnical Commission) jointlyProvably Repairing the ISO/IEC 9798 Standard for Entity Authentication David Basin, Cas Cremers the family of entity authentication proto- cols defined by the ISO/IEC 9798 standard and find numerous

  19. Mitochondrial and nuclear DNA base excision repair are affected differently by caloric restriction1

    E-Print Network [OSTI]

    Stuart, Jeffrey A.

    Mitochondrial and nuclear DNA base excision repair are affected differently by caloric restriction1 of Biology, Brock University, St. Catharines, Ontario, Canada; and Gazi University, Faculty of Pharmacy in kidney mitochondria. 4. CR increases nuclear BER activity BER activity and the activities of proteins

  20. Development/Plasticity/Repair Dendritic Spine Dynamics Regulate the Long-Term Stability

    E-Print Network [OSTI]

    van Rossum, Mark

    Development/Plasticity/Repair Dendritic Spine Dynamics Regulate the Long-Term Stability of Synaptic Plasticity Cian O'Donnell,1,2 Matthew F. Nolan,3 and Mark C. W. van Rossum1 1Institute for Adaptive of Edinburgh, Edinburgh EH8 9XD, United Kingdom Long-term synaptic plasticity requires postsynaptic influx

  1. Development/Plasticity/Repair A Refractory Period for Rejuvenating GABAergic Synaptic

    E-Print Network [OSTI]

    Gruner, Daniel S.

    Development/Plasticity/Repair A Refractory Period for Rejuvenating GABAergic Synaptic Transmission and Ocular Dominance Plasticity with Dark Exposure Shiyong Huang,1* Yu Gu,2* Elizabeth M. Quinlan,2 Dark exposure initiated in adulthood reactivates robust ocular dominance plasticity in the visual

  2. Development/Plasticity/Repair Simultaneous NMDA-Dependent Long-Term Potentiation of

    E-Print Network [OSTI]

    Segal, Menahem

    Development/Plasticity/Repair Simultaneous NMDA-Dependent Long-Term Potentiation of EPSCs and Long activity-dependent long-term plasticity of neuronal networks is the interplay between excitatory, whereas a nitric oxide synthase inhibitor was ineffec- tive. Finally, network-induced plasticity

  3. The Stumbling Block in Lung Repair of Emphysema: Elastic Fiber Assembly

    E-Print Network [OSTI]

    Mecham, Robert

    The Stumbling Block in Lung Repair of Emphysema: Elastic Fiber Assembly Adrian Shifren and Robert P properties of the lung are largely determined by the connective tissue networks laid down during development. The macromolecules most important for lung mechanics and structural integrity are collagen, elastin

  4. Development/Plasticity/Repair Identification of Modulators of Hair Cell Regeneration in the

    E-Print Network [OSTI]

    Rubel, Edwin

    Development/Plasticity/Repair Identification of Modulators of Hair Cell Regeneration compounds that modulate hair cell regeneration in zebrafish. Of the 1680 compounds evaluated, we identified,aresyntheticglucocorticoidsthatpotentiatedhaircellnumbersduringregenerationandalsoinducedhair cell addition in the absence of damage. BrdU analysis confirmed that the extra hair cells arose from

  5. Development/Plasticity/Repair Hair Cell Replacement in Adult Mouse Utricles after

    E-Print Network [OSTI]

    Rubel, Edwin

    Development/Plasticity/Repair Hair Cell Replacement in Adult Mouse Utricles after Targeted Ablation of Hair Cells with Diphtheria Toxin Justin S. Golub,1 Ling Tong,1 Tot B. Ngyuen,1 Cliff R. Hume,1 Richard developed a transgenic mouse to permit conditional and selective ablation of hair cells in the adult mouse

  6. Using Differential Adhesion to Control Self-Assembly and Self-Repair of Collections of Modular Mobile Robots 

    E-Print Network [OSTI]

    Ottery, Peter

    This thesis presents a novel distributed control method which allows a collection of independently mobile robotic units, with two or three dimensional movement, to self-assemble into self-repairing hierarchical structures. ...

  7. The role of vascular endothelial growth factor (VEGF) in repair and recovery from acute respiratory distress syndrome (ARDS) 

    E-Print Network [OSTI]

    Medford, Andrew R.L

    2007-01-01T23:59:59.000Z

    Acute Respiratory Distress Syndrome (ARDS) is the most extreme form of acute lung injury and continues to have a significant morbidity and mortality. Unfortunately, the mechanisms involved in the recovery and repair of ...

  8. Repair of localized defects in multilayer-coated reticle blanks for extreme ultraviolet lithography

    DOE Patents [OSTI]

    Stearns, Daniel G. (Los Altos, CA); Sweeney, Donald W. (San Ramon, CA); Mirkarimi, Paul B. (Sunol, CA)

    2004-11-23T23:59:59.000Z

    A method is provided for repairing defects in a multilayer coating layered onto a reticle blank used in an extreme ultraviolet lithography (EUVL) system. Using high lateral spatial resolution, energy is deposited in the multilayer coating in the vicinity of the defect. This can be accomplished using a focused electron beam, focused ion beam or a focused electromagnetic radiation. The absorbed energy will cause a structural modification of the film, producing a localized change in the film thickness. The change in film thickness can be controlled with sub-nanometer accuracy by adjusting the energy dose. The lateral spatial resolution of the thickness modification is controlled by the localization of the energy deposition. The film thickness is adjusted locally to correct the perturbation of the reflected field. For example, when the structural modification is a localized film contraction, the repair of a defect consists of flattening a mound or spreading out the sides of a depression.

  9. Nondestructive evaluation and characterization of damage and repair to continuous-fiber ceramic composite panels.

    SciTech Connect (OSTI)

    Sun, J. G.; Petrak, D. R.; Pillai, T. A. K.; Deemer, C.; Ellingson, W. A.

    1998-04-01T23:59:59.000Z

    Continuous fiber ceramic matrix composites are currently being developed for a variety of high-temperature applications. Because of the high costs of making these components, minor damage incurred during manufacturing or operation must be rewired in order to extend the life of the components. In this study, five ceramic-grade Nicalon{trademark} fiber/SiNC-matrix composite panels were intentionally damaged with a pendulum-type impactor during an impact test. The damaged panels were then repaired at Dow Corning Corporation. Three nondestructive evaluation (NDE) methods were used to study the characteristics of the panels after the damage and again after the panels were repaired. The NDE methods were X-ray radiography, infrared thermal imaging, and air-coupled ultrasound. The results showed that the impact test induced various types of damage in the panels. The NDE data that were obtained by the three NDE methods were correlated with each other.

  10. Weld Repair of a Stamped Pressure Vessel in a Radiologically Controlled Zone

    SciTech Connect (OSTI)

    Cannell, Gary L. [Fluor Enterprises, Inc.; Huth, Ralph J. [CH2MHill Plateau Remediation Company; Hallum, Randall T. [Fluor Government Group

    2013-08-26T23:59:59.000Z

    In September 2012 an ASME B&PVC Section VIII stamped pressure vessel located at the DOE Hanford Site Effluent Treatment Facility (ETF) developed a through-wall leak. The vessel, a steam/brine heat exchanger, operated in a radiologically controlled zone (by the CH2MHill PRC or CHPRC), had been in service for approximately 17 years. The heat exchanger is part of a single train evaporator process and its failure caused the entire system to be shut down, significantly impacting facility operations. This paper describes the activities associated with failure characterization, technical decision making/planning for repair by welding, logistical challenges associated with performing work in a radiologically controlled zone, performing the repair, and administrative considerations related to ASME code requirements.

  11. Subterranean barriers, methods, and apparatuses for forming, inspecting, selectively heating, and repairing same

    DOE Patents [OSTI]

    Nickelson, Reva A. (Shelley, ID); Sloan, Paul A. (Rigby, ID); Richardson, John G. (Idaho Falls, ID); Walsh, Stephanie (Idaho Falls, ID); Kostelnik, Kevin M. (Idaho, ID)

    2009-04-07T23:59:59.000Z

    A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

  12. Template strand scrunching during DNA gap repair synthesis by human polymerase [lamda

    SciTech Connect (OSTI)

    Garcia-Diaz, Miguel; Bebenek, Katarzyna; Larrea, Andres A.; Havener, Jody M.; Perera, Lalith; Krahn, Joseph M.; Pedersen, Lars C.; Ramsden, Dale A.; Kunkel, Thomas A.; (NIH); (UNC)

    2009-09-25T23:59:59.000Z

    Family X polymerases such as DNA polymerase {lambda}(Pol {lambda}) are well suited for filling short gaps during DNA repair because they simultaneously bind both the 5{prime} and 3{prime} ends of short gaps. DNA binding and gap filling are well characterized for 1-nucleotide (nt) gaps, but the location of yet-to-be-copied template nucleotides in longer gaps is unknown. Here we present crystal structures revealing that, when bound to a 2-nt gap, Pol {lambda} scrunches the template strand and binds the additional uncopied template base in an extrahelical position within a binding pocket that comprises three conserved amino acids. Replacing these amino acids with alanine results in less processive gap filling and less efficient NHEJ when 2-nt gaps are involved. Thus, akin to scrunching by RNA polymerase during transcription initiation, scrunching occurs during gap filling DNA synthesis associated with DNA repair.

  13. "You Can Do It" Basic Home Repair Using Hand and Power Tools

    E-Print Network [OSTI]

    1 "You Can Do It" Basic Home Repair Using Hand and Power Tools by Janie L. Harris Extension Housing guard housing. Place the tool rest 1/8 inch from the wheel on bench-mounted units. Before starting://www.cdc.gov/nasd/docs/ University of Denver, Risk Management http://www.du.edu/risk/Tool_Safety.html #12;2 "You Can Do It" Basic

  14. The strengthening and repair of underground structures: A new approach to the management of nuclear waste

    SciTech Connect (OSTI)

    Colgate, S.A.

    1991-01-01T23:59:59.000Z

    This paper presents three closely related ideas and technologies: (1) The secure, repairable, long time confinement of nuclear radioactive waste underground by a large surrounding region of compressive overstress; (2) The inherent tectonic weakness and vulnerability of the normal underground environment and its modification by overstress; (3) The process of creating overstress by the sequential periodic high pressure injection of a finite gel strength rapid setting grout. 12 refs., 6 figs.

  15. Note: A Graph-Theoretical Approach to Level of Repair Analysis

    E-Print Network [OSTI]

    2004-08-29T23:59:59.000Z

    Aug 29, 2004 ... cilities to minimize overall life-cycle costs. ... decisions, LORA seeks to determine an optimal provision of repair and maintenance ... Their heuristic is based on a relaxation of LORA into a pair of ... R2 is a consequence of R1 and a policy of .... from the fact that one can find a minimum cut in N(B) in time O(n2.

  16. Development program to certify composite doubler repair technique for commercial aircraft

    SciTech Connect (OSTI)

    Roach, D.P.

    1997-07-01T23:59:59.000Z

    Commercial airframes exceeding 20 service years often develop crack and corrosion flaws. Bonded composite doublers offer a cost effective method to safely extend aircraft lives. The Federal Aircraft Authority (FAA) has completed a project to introduce composite doubler repair technology to the commercial aircraft industry. Instead of riveting steel or aluminum plates for repair, a single composite doubler may be bonded to the damaged structure. Adhesive bonding eliminates stress concentrations caused by fastener holes. Composites are readily formed into complex shapes for repairing irregular components. Also, composite doublers can be tailored to meet specific anisotropy needs, eliminating structural stiffening in directions other than those required. Other advantages include corrosion resistance, a high strength-to-weight ratio, and potential time savings in installation. One phase of this study developed general methodologies and test programs to ensure proper performance of the technique. A second phase focused on reinforcement of an L-1011 door frame, and encompassed all lifetime tasks such as design, analysis, installation, and nondestructive inspection. This paper overviews the project and details the activities conducted to gain FAA approval for composite doubler use. Structural tests evaluated the damage tolerance and fatigue performance of composite doublers while finite element models were generated to study doubler design issues. Nondestructive inspection procedures were developed and validated using full-scale test articles. Installation dry-runs demonstrated the viability of applying composite doublers in hangar environments. The project`s documentation package was used to support installation of a Boron-Epoxy composite repair on a Delta Air Lines L-1011 aircraft. A second product of the results is a Lockheed Service Bulletin which allows the door corner composite doubler to be installed on all L-1011 aircraft. 9 refs., 10 figs., 2 tabs.

  17. Lethal Hemorrhage Caused by Aortoesophageal Fistula Secondary to Stent-Graft Repair of the Thoracic Aorta

    SciTech Connect (OSTI)

    Sager, Hendrik B., E-mail: hendrik.sager@uk-sh.de [Universitaet zu Luebeck, Medizinische Klinik II (Germany); Wellhoener, Peter [Universitaet zu Luebeck, Medizinische Klinik I (Germany); Wermelt, Johanna A. [Klinikum Neustadt, Klinik fuer Innere Medizin (Germany); Schunkert, Heribert; Kurowski, Volkhard [Universitaet zu Luebeck, Medizinische Klinik II (Germany)

    2011-02-15T23:59:59.000Z

    Aortoesophageal fistula (AEF) is a rare but life-threatening complication after endovascular or surgical aortic repair. Here we report a patient with AEF secondary to aortic stent-placement 2 years earlier who presented with hematemesis and died from hemorrhagic shock. By means of this case and the literature, we highlight potential bleeding sources in such a scenario because this is of crucial importance for the management strategy.

  18. REPAIR OF A DAMAGED PART ON HYDRAULIC TRACT KAPLAN TURBINE WITH "LIQUID METAL"

    E-Print Network [OSTI]

    Fuad ?atovi?; Prof Emeritus; Edin Džiho Msc; Mostar Bih; Mustafa Šehi?; Hydroelectric Power Plant Neretva; Jablanica Bih

    During 2011 on unit no.2 reparation work was carried out aimed at fault removal on Kaplan turbine impeller, while extending the lifespan of the entire installed equipment. The overhaul included all vital parts, replacement of all gasket compresses, machine processing to achieve the required tolerances, NDT equipment control according to "Quality Control Plan", repairing equipment, etc. This paper describes the recovery of defects on the blades of the guide vanes using epoxy masses.

  19. Endovascular Repair of a Pseudoaneurysm of the Abdominal Aorta Secondary to Translumbar Aortography

    SciTech Connect (OSTI)

    Mir, Naheed; Nunzio, Mario De; Pollock, John G [Derbyshire Royal Infirmary, Department of Clinical Radiology (United Kingdom)], E-mail: JG.Pollock@derbyhospitals.nhs.uk

    2006-12-15T23:59:59.000Z

    This report describes an incidental finding of a pseudoaneurysm of the abdominal aorta on a computed tomography (CT) renal angiogram during investigation of chronic renal failure in a 73-year-old man. The patient had undergone a translumbar aortogram 20 years previously. An increase in the size of the aneurysm by 7 mm over 6 months prompted treatment and the aneurysm underwent successful endovascular repair with a custom-made stent-graft.

  20. The DNA Single-Strand Break Repair Machinery Facilitates CAF-1-Mediated Histone Deposition at Oxidative DNA Strand Breaks

    E-Print Network [OSTI]

    Arman Nabatiyan; Zhihong Zeng; Keith W. Caldecott

    2012-02-01T23:59:59.000Z

    Oxidative DNA single strand breaks arise continuously in cells and defects in their repair have been implicated in neurological disease. While much progress has been made in understanding how chromosomal single strand breaks are repaired little is known about the changes chromatin structure that accompany this process. Here, we show that nascent recombinant histone H3.1 protein accumulates and is deposited into chromatin at sites of DNA strand breakage in quiescent human cells following oxidative stress, and that core components of the single-strand break repair machinery are required for this process. We show that the SSBR sensor and scaffold proteins poly (ADP-ribose) polymerase and XRCC1 facilitate accumulation of chromatin assembly factor-1 (CAF-1) at sites of oxidative DNA strand breakage, which in turn mediates the deposition of Histone H3.1. We also demonstrate that depletion of CAF-1 slows global rates of DNA strand break repair in quiescent cells following oxidative stress, demonstrating that single-strand break repair and histone deposition are tightly coordinated processes. These data describe a novel role for the DNA singlestrand break repair machinery and implicate histone turnover as a core component of the cellular response of quiescent cells to oxidative damage.

  1. Plasma transferred arc repair welding of the nickel-base superalloy IN-738LC

    SciTech Connect (OSTI)

    Su, C.Y.; Chou, C.P. [National Chiao Tung Univ., Hsinchu (Taiwan, Province of China). Dept. of Mechanical Engineering; Wu, B.C.; Lih, W.C. [Industrial Technology Research Inst., Hsinchu (Taiwan, Province of China). Materials Research Labs.

    1997-10-01T23:59:59.000Z

    Plasma transferred arc welding (PTA) has been considered a promising process to restore worn areas of land-based gas turbine blades and vanes. The objective of this investigation was to study the effect of PTA welding on the repairing of IN-738LC superalloy components. Tensile tests were conducted on specimens welded with various combinations of parameters. Room temperature, 760 C, and 980 C were selected as tensile test temperatures. High-temperature phase transformed, during solidification, were identified by differential thermal analysis (DTA). The weld-pool shapes and microstructures of welded specimens prepared by various welding parameters were evaluated by optical metallography (OM), a scanning electron microscope (SEM) equipped with energy dispersive x-ray spectrometer (EDS), and microhardness testing. Results of this study showed that PTA welded specimens exhibited 96% nominal tensile strength of IN-738LC base materials. Specimen failure was observed predominantly in the base materials instead of in the heat-affected zone (HAZ) for gas tungsten arc weld (GTAW) repair weldments. IN-738LC is considered susceptible to weld cracking during fusion welding; however, using a low-input repair welding process (PTA), cracking susceptibility could be minimized by the optimized welding parameters.

  2. General Car Use Policies Ground Transportation Policy

    E-Print Network [OSTI]

    Goodman, Robert M.

    and tolls Drive and Park Roundtrip mileage, tolls, parking fees, shuttle to terminal fees Taxi Fare is intended to cover all operating costs including depreciation, repairs, gasoline, insurance, towage

  3. LENS repair and modification of metal NW components:materials and applications guide.

    SciTech Connect (OSTI)

    Smugeresky, John E. (Sandia National Laboratories, Livermore, CA); Gill, David Dennis; Oberhaus, Jason (BWXT Y-12); Adams, Thad (Savannah River National Laboratory); VanCamp, Chad (Kansas City Plant)

    2006-11-01T23:59:59.000Z

    Laser Engineered Net Shaping{trademark} (LENS{reg_sign}) is a unique, layer additive, metal manufacturing technique that offers the ability to create fully dense metal features and components directly from a computer solid model. LENS offers opportunities to repair and modify components by adding features to existing geometry, refilling holes, repairing weld lips, and many other potential applications. The material deposited has good mechanical properties with strengths typically slightly higher that wrought material due to grain refinement from a quickly cooling weld pool. The result is a material with properties similar to cold worked material, but without the loss in ductility traditionally seen with such treatments. Furthermore, 304L LENS material exhibits good corrosion resistance and hydrogen compatibility. This report gives a background of the LENS process including materials analysis addressing the requirements of a number of different applications. Suggestions are given to aid both the product engineer and the process engineer in the successful utilization of LENS for their applications. The results of testing on interface strength, machinability, weldability, corrosion resistance, geometric effects, heat treatment, and repair strategy testing are all included. Finally, the qualification of the LENS process is briefly discussed to give the user confidence in selecting LENS as the process of choice for high rigor applications. The testing showed LENS components to have capability in repair/modification applications requiring complex castings (W80-3 D-Bottle bracket), thin wall parts requiring metal to be rebuilt onto the part (W87 Firing Set Housing and Y-12 Test Rings), the filling of counterbores for use in reservoir reclamation welding (SRNL hydrogen compatibility study) and the repair of surface defects on pressure vessels (SRNL gas bottle repair). The material is machinable, as testing has shown that LENS deposited material machines similar to that of welded metal. Tool wear is slightly higher in LENS material than in wrought material, but not so much that one would be concerned with increased tooling cost. The LENS process achieved process qualification for the AY1E0125 D-Bottle Bracket from the W80-3 LEP program, and in the effort, also underwent testing in weapons environments. These tests included structural dynamic response testing and drop testing. The LENS deposited parts were compared in these tests with conventionally machined parts and showed equivalency to such an extent that the parts were accepted for use in parallel path subsystem-level weapon environment testing. The evaluation of LENS has shown that the process can be a viable option when either complete metal parts are needed or existing metal parts require modification or repair. The LENS Qualification Technology Investment team successfully investigated new applications for the LENS process and showed that it has great applicability across the Nuclear Weapons Complex as well as in other high rigor applications.

  4. Proposal to negotiate two contracts, without competitive tendering, for the supply and the repair of compressors for the LHC 18 kW helium refrigeration plants

    E-Print Network [OSTI]

    2011-01-01T23:59:59.000Z

    Proposal to negotiate two contracts, without competitive tendering, for the supply and the repair of compressors for the LHC 18 kW helium refrigeration plants

  5. DNA Repair Biomarkers Predict Response to Neoadjuvant Chemoradiotherapy in Esophageal Cancer

    SciTech Connect (OSTI)

    Alexander, Brian M., E-mail: bmalexander@lroc.harvard.edu [Department of Radiation Oncology, Dana-Farber/Brigham and Women's Cancer Center, Boston, Massachusetts (United States); Wang Xiaozhe [On-Q-ity, Inc., Waltham, Massachusetts (United States); Niemierko, Andrzej [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States); Weaver, David T. [On-Q-ity, Inc., Waltham, Massachusetts (United States); Mak, Raymond H. [Department of Radiation Oncology, Dana-Farber/Brigham and Women's Cancer Center, Boston, Massachusetts (United States); Roof, Kevin S. [Southeast Radiation Oncology, Charlotte, North Carolina (United States); Fidias, Panagiotis [Department of Medicine, Massachusetts General Hospital, Boston, Massachusetts (United States); Wain, John [Department of Surgery, Massachusetts General Hospital, Boston, Massachusetts (United States); Choi, Noah C. [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States)

    2012-05-01T23:59:59.000Z

    Purpose: The addition of neoadjuvant chemoradiotherapy prior to surgical resection for esophageal cancer has improved clinical outcomes in some trials. Pathologic complete response (pCR) following neoadjuvant therapy is associated with better clinical outcome in these patients, but only 22% to 40% of patients achieve pCR. Because both chemotherapy and radiotherapy act by inducing DNA damage, we analyzed proteins selected from multiple DNA repair pathways, using quantitative immunohistochemistry coupled with a digital pathology platform, as possible biomarkers of treatment response and clinical outcome. Methods and Materials: We identified 79 patients diagnosed with esophageal cancer between October 1994 and September 2002, with biopsy tissue available, who underwent neoadjuvant chemoradiotherapy prior to surgery at the Massachusetts General Hospital and used their archived, formalin-fixed, paraffin-embedded biopsy samples to create tissue microarrays (TMA). TMA sections were stained using antibodies against proteins in various DNA repair pathways including XPF, FANCD2, PAR, MLH1, PARP1, and phosphorylated MAPKAP kinase 2 (pMK2). Stained TMA slides were evaluated using machine-based image analysis, and scoring incorporated both the intensity and the quantity of positive tumor nuclei. Biomarker scores and clinical data were assessed for correlations with clinical outcome. Results: Higher scores for MLH1 (p = 0.018) and lower scores for FANCD2 (p = 0.037) were associated with pathologic response to neoadjuvant chemoradiation on multivariable analysis. Staining of MLH1, PARP1, XPF, and PAR was associated with recurrence-free survival, and staining of PARP1 and FANCD2 was associated with overall survival on multivariable analysis. Conclusions: DNA repair proteins analyzed by immunohistochemistry may be useful as predictive markers for response to neoadjuvant chemoradiotherapy in patients with esophageal cancer. These results are hypothesis generating and need confirmation in an independent data set.

  6. JAG Tearing Technique with Radiofrequency Guide Wire for Aortic Fenestration in Thoracic Endovascular Aneurysm Repair

    SciTech Connect (OSTI)

    Ricci, Carmelo [Azienda Ospedaliera Universitaria Senese, Policlinico Santa Maria alle Scotte, Radiologia Interventistica (Italy); Ceccherini, Claudio, E-mail: claudiocec@hotmail.it; Leonini, Sara [Radiologia Universitaria, Azienda Ospedaliera Universitaria Senese, Policlinico Santa Maria alle Scotte (Italy); Cini, Marco; Vigni, Francesco [Azienda Ospedaliera Universitaria Senese, Policlinico Santa Maria alle Scotte, Radiologia Interventistica (Italy); Neri, Eugenio; Tucci, Enrico; Benvenuti, Antonio; Tommasino, Giulio; Sassi, Carlo [Azienda Ospedaliera Universitaria Senese, Policlinico Santa Maria alle Scotte, Chirurgia dell'Aorta Toracica (Italy)

    2012-02-15T23:59:59.000Z

    An innovative approach, the JAG tearing technique, was performed during thoracic endovascular aneurysm repair in a patient with previous surgical replacement of the ascending aorta with a residual uncomplicated type B aortic dissection who developed an aneurysm of the descending thoracic aorta with its lumen divided in two parts by an intimal flap. The proximal landing zone was suitable to place a thoracic stent graft. The distal landing zone was created by cutting the intimal flap in the distal third of the descending thoracic aorta with a radiofrequency guide wire and intravascular ultrasound catheter.

  7. Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops

    SciTech Connect (OSTI)

    Sweeney, Lynn C.

    2013-04-10T23:59:59.000Z

    An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Work performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M™ 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit. Noise dosimetry sampling was performed on a random basis and was representative of the different work activities within the four shops. Twenty three percent of the noise samples exceeded the occupational exposure limit of 85 decibels for an 8-hour time-weightedaverage. Work activities where noise levels were higher included use of impact wrenches and grinding wheels.

  8. Endovascular Stent-Graft Repair as a Late Secondary Procedure After Previous Aortic Grafts

    SciTech Connect (OSTI)

    Matsagas, Miltiadis I. [School of Medicine, University of Ioannina, Department of Surgery - Vascular Surgery Unit (Greece)], E-mail: mimats@cc.uoi.gr; Anagnostopoulos, Constantine E. [School of Medicine, University of Ioannina, Department of Cardiothoracic Surgery (Greece); Papakostas, John C. [School of Medicine, University of Ioannina, Department of Surgery - Vascular Surgery Unit (Greece); DeRose, Joseph J. [St. Luke's-Roosevelt Hospital, Columbia University, Department of Cardiothoracic Surgery (United States); Siminelakis, Stavros [School of Medicine, University of Ioannina, Department of Cardiothoracic Surgery (Greece); Katsouras, Christos S. [School of Medicine, University of Ioannina, Department of Cardiology (Greece); Toumpoulis, Ioannis K.; Drossos, George E. [School of Medicine, University of Ioannina, Department of Cardiothoracic Surgery (Greece); Michalis, Lampros K. [School of Medicine, University of Ioannina, Department of Cardiology (Greece)

    2006-08-15T23:59:59.000Z

    Thoracic and abdominal aortic endovascular procedures as alternatives to aortic reoperations were studied in three different cases. An anastomotic aneurysm after previous thoracic aortic graft for coarctation, a second-stage elephant trunk repair (descending thoracic aortic aneurysm), and a secondary aneurysm proximal to a previous abdominal aortic graft were successfully treated with endovascular stent-grafts. During the follow-up period no lethal events or major aortic or graft-related complications were observed, except a type II endoleak in the anastomotic aortic aneurysm case. An endovascular stent-graft can be safely deployed into a previously implanted vascular graft, avoiding repeat surgery.

  9. UC's Blue and Gold Opportunity Plan will cover your educational and student services fees with a combination of grants and scholarships, if you are a California resident whose family earns less than

    E-Print Network [OSTI]

    Grether, Gregory

    UC's Blue and Gold Opportunity Plan will cover your educational and student services fees,000 and if you qualify for financial aid. Blue and Gold Opportunity Plan will cover $12,192 for 2011-12 and $12 in an academic year term. Blue and Gold Plan does not extend to summer months. Meet basic, non

  10. INTRAMURAL SPORTS TEAM REGISTRATION FORM To register your team, fill in the top portion of this form completely and bring it to the IM Office (WFC Room 201D) with entry fee.

    E-Print Network [OSTI]

    Almor, Amit

    INTRAMURAL SPORTS TEAM REGISTRATION FORM To register your team, fill in the top portion of this form completely and bring it to the IM Office (WFC Room 201D) with entry fee. TEAM NAME:______________________________________________ NOTE: The University of South Carolina Intramural Sports Program reserves the right to change any team

  11. Dofasco`s No. 4 blast furnace hearth breakout, repair and rescue

    SciTech Connect (OSTI)

    Donaldson, R.J.; Fischer, A.J.; Sharp, R.M.; Stothart, D.W. [Dofasco Inc., Hamilton, Ontario (Canada)

    1995-12-01T23:59:59.000Z

    On May 5, 1994, after producing 9.5 million metric tons of iron, Dofasco`s No. 4 Blast Furnace experienced a hearth breakout 250 millimeters below the west taphole. The hot metal spill caused a fire resulting in severe damage and 33 days of lost production. During a 26-day period, electrical wiring, water drainage systems and both tapholes were repaired. Recovery from an unprepared furnace stop of this length, with the deadman depleted is difficult. To aid with the rescue Hoogovens-designed oxygen/fuel lances were commissioned. The furnace recovery began with a lance in each taphole and all tuyeres plugged. Six days after startup the furnace was casting into torpedo cars, and after nine days operation had returned to normal. This incident prompted Dofasco to expand the hearth monitoring system to detect and prevent similar occurrences. During the repair, 203 new thermocouples were installed in the hearth, concentrating on the tapholes and elephant foot areas. These thermocouples were installed at various depths and locations to allow heat flux calculations. This hearth monitoring system has already identified other problem areas and provided valuable information about hearth drainage patterns. This information has allowed them to develop control strategies to manage localized problem areas.

  12. Percutaneous Stent-Graft Repair of a Mycotic Pulmonary Artery Pseudoaneurysm

    SciTech Connect (OSTI)

    Chou Meichun; Liang Hueilung, E-mail: hlliang@isca.vghks.gov.tw; Pan Huayban; Yang Chienfang [Kaohsiung Veterans General Hospital, Department of Radiology (China)

    2006-10-15T23:59:59.000Z

    Ruptured mycotic pulmonary pseudoaneurysm is a lethal complication. Emergent surgical repair is usually recommended, but still associated with a high mortality rate. We present a patient in whom mycotic pulmonary pseudoaneurysm was a complication after surgical lobectomy 2 weeks earlier. This patient had suffered from repeated massive hemoptysis. After emergent surgical repair of the ruptured pulmonary artery stump, another episode of massive hemorrhage occurred. The pulmonary arteriogram revealed a segmental stenosis and a large, wide-necked, lobulated pseudoaneurysm at the left proximal pulmonary artery. We deployed a balloon-expandable stent-graft (48 mm in length mounted on a 12 mm x 40 mm angioplasty balloon) across the stenotic segment and the neck of the pulmonary pseudoaneurysm. Hemostasis was achieved immediately and, under a 4-week antibiotic treatment, patient was transferred to a local hospital for medical care. This case report demonstrates the benefit of minimally invasive endovascular therapy in a critically ill patient. A literature review of the etiology and management of mycotic pulmonary pseudoaneurysm is included.

  13. Operational results of shaft repair by installing stave type cooler at Kimitsu Nos. 3 and 4 blast furnaces

    SciTech Connect (OSTI)

    Oda, Hiroshi; Amano, Shigeru; Sakamoto, Aiichiro; Anzai, Osamu [Nippon Steel Corp., Kimitsu, Chiba (Japan). Kimitsu Works; Nakagome, Michiru; Kuze, Toshisuke [Nippon Steel Corp., Futtsu, Chiba (Japan); Imuta, Akira [Nippon Steel Corp., Tokyo (Japan). Plant and Machinery Div.

    1997-12-31T23:59:59.000Z

    Nos. 3 and 4 blast furnaces in Nippon Steel Corporation Kimitsu Works were both initially fitted with cooling plate systems. With the aging of each furnace, the damage to their respective inner-shaft profiles had become serious. Thus, in order to prevent operational change and prolong the furnace life, the inner-shaft profile of each furnace was repaired by replacing the former cooling plate system with the stave type cooler during the two-week-shutdowns. With this repair, stability of burden descent and gas flow near the wall part of the furnace have been achieved. Thus the prolongation of the furnace life is naturally expected.

  14. Inhibition of X-ray-induced potentially lethal damage (PLD) repair in aerobic plateau-phase Chinese hamster cells by misonidazole

    SciTech Connect (OSTI)

    Brown, D.M.

    1984-01-01T23:59:59.000Z

    The effect of the 2-nitroimidazole radiosensitizer misonidazole (MISO) and the hydrophilic analog SR-2508 on the repair of X-ray-induced potentially lethal damage (PLD) was studied in plateau-phase Chinese Hamster ovary (HA-1) cells. It was found that although MISO does not radiosensitize aerobic cells, it inhibits the repair of PLD. However, under hypoxic conditions, MISO has no effect on PLD repair. The major portion of the inhibition of PLD repair in aerobic cells requires the presence of MISO only during irradiation; little or no additional inhibition occurs when MISO is present during the postirradiation repair period. Also, treatment of aerobic cells with 5 mM MISO for either 5 or 30 min prior to irradiation is equally inhibitory. This suggests that the presence of MISO in some way modifies the initial lesion under aerobic conditions since it does not increase cell killing as determined by immediate plating but inhibits subsequent repair. The inhibition is concentration dependent; 0.5 mM MISO inhibits PLD repair by one-half while 5-10 mM totally inhibits the repair measured 6 hr postirradiation. This phenomenon suggests that radiosensitization of tissue in vivo by MISO and other 2-nitroimidazoles may not be unequivocal proof of the presence of hypoxic cells.

  15. Subj: Educational and General (E&G) Facility Support Provide an overview of Facility Operations, Maintenance, Repair and Renovation and Space

    E-Print Network [OSTI]

    support, and, preventive and unscheduled maintenance of all building systems, with the exception of BAS Operations, Maintenance, Repair and Renovation and Space Management Procedures and Practices. KEY DEFINITIONS chambers, fume hoods, fixed seating, etc. are normally considered part of the building. Maintenance, repair

  16. Performance and Impact from Duct Repair and Ventilation Modifications of Two Newly Constructed Manufactured Houses Located in a Hot and Humid Climate

    E-Print Network [OSTI]

    Withers, C.; Moyer, N.; Chasar, D.; Chandra, S.

    2002-01-01T23:59:59.000Z

    airtightness was adjusted until it was the same in each house, and duct leaks were sealed so that the ducts were tight and there was equal tightness in both houses. A ventilation system was also added at the same time of duct repair. Duct repair...

  17. Water Pollution Fee (Michigan)

    Broader source: Energy.gov [DOE]

    The Groundwater Program regulates discharge to groundwater under Part 31, Water Resources Protection, of the Natural Resources and Environmental Protection Act, 1994 PA 451 and Part 22 Rules....

  18. Annual Emission Fees (Michigan)

    Broader source: Energy.gov [DOE]

    The Renewable Operating Permit (ROP) is required by Title V of the Clean Air Act Amendments of 1990. The ROP program clarifies the requirements that apply to a facility that emits air contaminants....

  19. NWP Fee Payments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency VisitSilver Toyota PriusNSR KeyNUG NUCLEAR WORKFORCE

  20. Fees | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazelPennsylvania:57427°, -89.4742177° ShowRural

  1. AWARD FEE PLAN TBD

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved:AdministrationAnalysisDarby/%2AO 474.2 Chg 1KANSAS CITY FIELD 10 6

  2. AWARD FEE PLAN TBD

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved:AdministrationAnalysisDarby/%2AO 474.2 Chg 1KANSAS CITY FIELD 10 6in

  3. Original Full Length Article Inkjet-based biopatterning of SDF-1 augments BMP-2-induced repair of

    E-Print Network [OSTI]

    Weiss, Lee E.

    Original Full Length Article Inkjet-based biopatterning of SDF-1 augments BMP-2-induced repair Biopatterning BMP-2 SDF-1 TGF-1 Background: A major problem in craniofacial surgery is non-healing bone defects-derived factor-1 (SDF-1), transforming growth factor-1 (TGF-1), or co-therapies thereof. We tested the hypothesis

  4. The Effect of Debris on Collector Optics, its Mitigation and Repair: Next-Step a Gaseous Sn EUV DPP Source

    E-Print Network [OSTI]

    Spila, Timothy P.

    The Effect of Debris on Collector Optics, its Mitigation and Repair: Next-Step a Gaseous Sn EUV DPP to advanced fuel plasma EUV sources is collector lifetime. The Illinois Debris-mitigation EUV Applications based on this work. Keywords: EUV source, debris, optics, collector lifetime, mitigation, plasma

  5. Image-Guided Techniques Improve the Short-term Outcome of Autologous Osteochondral Cartilage Repair Surgeries -An

    E-Print Network [OSTI]

    Stewart, James

    Image-Guided Techniques Improve the Short-term Outcome of Autologous Osteochondral Cartilage Repair and deliver osteochondral grafts remains problematic. We investigated whether image-guided methods (optically-guided and template-guided) can improve the outcome of mo- saic arthroplasty procedures. Methods: Fifteen sheep were

  6. Surgical technique, using skin, for repair of simultaneously ruptured anterior cruciate and medial collateral ligaments of the canine femorotibial articulation

    E-Print Network [OSTI]

    Chastain, Jamie Neal

    1959-01-01T23:59:59.000Z

    Agricultural and Mechanical College of Texan In Partial Fulfillnent of the !Iequireaents for the Degree Meeter of Science in Veterinary Medicine and Surgery by Janie Neal Chaetain January 1&359 SURGICAL TECHNI((UE ~ USIN'G SKIN ~ FOR REPAIR...

  7. Diet-dependent survival of protein repair-deficient miceB Christine E. Farrar, Steven ClarkeT

    E-Print Network [OSTI]

    Clarke, Steven

    Diet-dependent survival of protein repair-deficient miceB Christine E. Farrar, Steven Clarke, and mice lacking this enzyme accumulate damaged proteins in multiple tissues, die at an early age from and in vivo [1­7]. Mice lacking the enzyme (Pcmt1À/À mice) accu- mulate damaged proteins in multiple tissues

  8. Homologous recombination contributes to the repair of DNA double-strand breaks induced by high-energy iron ions

    SciTech Connect (OSTI)

    Zafar, Faria; Seidler, Sara B.; Kronenberg, Amy; Schild, David; Wiese, Claudia

    2010-06-29T23:59:59.000Z

    To test the contribution of homologous recombinational repair (HRR) in repairing DNA damaged sites induced by high-energy iron ions, we used: (1) HRR-deficient rodent cells carrying a deletion in the RAD51D gene and (2) syngeneic human cells impaired for HRR by RAD51D or RAD51 knockdown using RNA interference. We show that in response to iron ions, HRR contributes to cell survival in rodent cells, and that HRR-deficiency abrogates RAD51 foci formation. Complementation of the HRR defect by human RAD51D rescues both enhanced cytotoxicity and RAD51 foci formation. For human cells irradiated with iron ions, cell survival is decreased, and, in p53 mutant cells, the levels of mutagenesis are increased when HRR is impaired. Human cells synchronized in S phase exhibit more pronounced resistance to iron ions as compared with cells in G1 phase, and this increase in radioresistance is diminished by RAD51 knockdown. These results implicate a role for RAD51-mediated DNA repair (i.e. HRR) in removing a fraction of clustered lesions induced by charged particle irradiation. Our results are the first to directly show the requirement for an intact HRR pathway in human cells in ensuring DNA repair and cell survival in response to high-energy high LET radiation.

  9. A review of "To Repair the Ruins: Reading Milton" edited by Mary C. Fenton and Louis Schwartz

    E-Print Network [OSTI]

    Welch, Anthony

    2013-01-01T23:59:59.000Z

    that deserve the attention he gives them. Mary C. Fenton and Louis Schwartz, eds. To Repair the Ruins: Reading Milton. Pittsburgh: Duquesne University Press, #18;#17;#16;#18;. xii + #1;#30; pp. + #18;#18; illus. $#14;#15;.#17;#17;. Review by #8...

  10. Design structure for in-system redundant array repair in integrated circuits

    DOE Patents [OSTI]

    Bright, Arthur A.; Crumley, Paul G.; Dombrowa, Marc; Douskey, Steven M.; Haring, Rudolf A.; Oakland, Steven F.; Quellette, Michael R.; Strissel, Scott A.

    2008-11-25T23:59:59.000Z

    A design structure for repairing an integrated circuit during operation of the integrated circuit. The integrated circuit comprising of a multitude of memory arrays and a fuse box holding control data for controlling redundancy logic of the arrays. The design structure provides the integrated circuit with a control data selector for passing the control data from the fuse box to the memory arrays; providing a source of alternate control data, external of the integrated circuit; and connecting the source of alternate control data to the control data selector. The design structure further passes the alternate control data from the source thereof, through the control data selector and to the memory arrays to control the redundancy logic of the memory arrays.

  11. Designer's guidebook for first wall/blanket/shield assembly, maintenance, and repair

    SciTech Connect (OSTI)

    Not Available

    1983-12-30T23:59:59.000Z

    This is the initial issue of the guidebook. Since a guidebook of this type must incorporate information concerning a wide range of subjects, much additional data will eventually be included. The guidebook will document, in summary and easily referenceable form, data, designs, design concepts, design guidelines and background information useful to the FWBS and to the Maintenance System designer. In providing guidelines for the AMR of the FWBS, the guidebook must, of necessity, include guidelines for all aspects of maintenance associated with the FWBS. These include most maintenance operations within the reactor room necessary to gain access, identify faults, and handle equipment related to FWBS maintenance. In addition, the guidelines include those required to define facility requirements for handling and repair of FWBS and related reactor components external to the reactor room. Particular emphasis is given to remote maintenance design and operations.

  12. Engineering Endostatin-Producing Cartilaginous Constructs for Cartilage Repair Using Nonviral Transfection of Chondrocyte-Seeded and Mesenchymal-Stem-Cell-Seeded Collagen Scaffolds

    E-Print Network [OSTI]

    Jeng, Lily

    Although there is widespread recognition of the importance of angiogenesis in tissue repair, there is little work on the inhibition of angiogenesis in the context of tissue engineering of naturally avascular tissues, like ...

  13. Disrupted G{sub 1} to S phase clearance via cyclin signaling impairs liver tissue repair in thioacetamide-treated type 1 diabetic rats

    SciTech Connect (OSTI)

    Devi, Sachin S. [Department of Toxicology, School of Pharmacy, College of Health Sciences, University of Louisiana at Monroe, 700 University Avenue, Sugar Hall no. 306, Monroe, LA 71209-0470 (United States); Mehendale, Harihara M. [Department of Toxicology, School of Pharmacy, College of Health Sciences, University of Louisiana at Monroe, 700 University Avenue, Sugar Hall no. 306, Monroe, LA 71209-0470 (United States)]. E-mail: mehendale@ulm.edu

    2005-09-01T23:59:59.000Z

    Previously we reported that a nonlethal dose of thioacetamide (TA, 300 mg/kg) causes 90% mortality in type 1 diabetic (DB) rats because of irreversible acute liver injury owing to inhibited hepatic tissue repair, primarily due to blockage of G{sub 0} to S phase progression of cell division cycle. On the other hand, DB rats receiving 30 mg TA/kg exhibited equal initial liver injury and delayed tissue repair compared to nondiabetic (NDB) rats receiving 300 mg TA/kg, resulting in a delay in recovery from liver injury and survival. The objective of the present study was to test the hypothesis that impaired cyclin-regulated progression of G{sub 1} to S phase of the cell cycle may explain inhibited liver tissue repair, hepatic failure, and death, contrasted with delayed liver tissue repair but survival observed in the DB rats receiving 300 in contrast to 30 mg TA/kg. In the TA-treated NDB rats sustained MAPKs and cyclin expression resulted in higher phosphorylation of retinoblastoma (pRb), explaining prompt tissue repair and survival. In contrast, DB rats receiving the same dose of TA (300 mg/kg) exhibited suppressed MAPKs and cyclin expression that led to inhibition of pRb, inhibited tissue repair, and death. On the other hand, DB rats receiving 30 mg TA/kg exhibited delayed up regulation of MAPK signaling that delayed the expression of CD1 and pRb, explaining delayed stimulation of tissue repair observed in this group. In conclusion, the hepatotoxicant TA has a dose-dependent adverse effect on cyclin-regulated pRb signaling: the lower dose causes a recoverable delay, whereas the higher dose inhibits it with corresponding effect on the ultimate outcomes on hepatic tissue repair; this dose-dependent adverse effect is substantially shifted to the left of the dose response curve in diabetes.

  14. The Preclose Technique in Percutaneous Endovascular Aortic Repair: A Systematic Literature Review and Meta-analysis

    SciTech Connect (OSTI)

    Jaffan, Abdel Aziz A., E-mail: aajaffan@gmail.com [Emory University School of Medicine, Division of Interventional Radiology and Image-Guided Medicine, Department of Radiology (United States); Prince, Ethan A., E-mail: eprince@lifespan.org [Warren Alpert Medical School of Brown University, Rhode Island Hospital, Section of Vascular and Interventional Radiology, Department of Diagnostic Imaging (United States); Hampson, Christopher O., E-mail: christopherohampson@gmail.com [Mercy Hospital (United States); Murphy, Timothy P., E-mail: tmurphy@lifespan.org [Warren Alpert Medical School of Brown University, Rhode Island Hospital, Section of Vascular and Interventional Radiology, Department of Diagnostic Imaging (United States)

    2013-06-15T23:59:59.000Z

    Purpose. To establish the efficacy and safety of the preclose technique in total percutaneous endovascular aortic repair (PEVAR).MethodsA systematic literature search of Medline database was conducted for series on PEVAR published between January 1999 and January 2012.ResultsThirty-six articles comprising 2,257 patients and 3,606 arterial accesses were included. Anatomical criteria used to exclude patients from undergoing PEVAR were not uniform across all series. The technical success rate was 94 % per arterial access. Failure was unilateral in the majority (93 %) of the 133 failed PEVAR cases. The groin complication rate in PEVAR was 3.6 %; a minority (1.6 %) of these groin complications required open surgery. The groin complication rate in failed PEVAR cases converted to groin cutdown was 6.1 %. A significantly higher technical success rate was achieved when arterial access was performed via ultrasound guidance. Technical failure rate was significantly higher with larger sheath size ({>=}20F). Conclusion. The preclose technique in PEVAR has a high technical success rate and a low groin complication rate. Technical success tends to increase with ultrasound-guided arterial access and decrease with larger access. When failure occurs, it is unilateral in the majority of cases, and conversion to surgical cutdown does not appear to increase the operative risk.

  15. Evaluating indoor exposure modeling alternatives for LCA: A case study in the vehicle repair industry

    SciTech Connect (OSTI)

    Demou, Evangelia; Hellweg, Stefanie; Wilson, Michael P.; Hammond, S. Katharine; McKone, Thomas E.

    2009-05-01T23:59:59.000Z

    We evaluated three exposure models with data obtained from measurements among workers who use"aerosol" solvent products in the vehicle repair industry and with field experiments using these products to simulate the same exposure conditions. The three exposure models were the: 1) homogeneously-mixed-one-box model, 2) multi-zone model, and 3) eddy-diffusion model. Temporally differentiated real-time breathing zone volatile organic compound (VOC) concentration measurements, integrated far-field area samples, and simulated experiments were used in estimating parameters, such as emission rates, diffusivity, and near-field dimensions. We assessed differences in model input requirements and their efficacy for predictive modeling. The One-box model was not able to resemble the temporal profile of exposure concentrations, but it performed well concerning time-weighted exposure over extended time periods. However, this model required an adjustment for spatial concentration gradients. Multi-zone models and diffusion-models may solve this problem. However, we found that the reliable use of both these models requires extensive field data to appropriately define pivotal parameters such as diffusivity or near-field dimensions. We conclude that it is difficult to apply these models for predicting VOC exposures in the workplace. However, for comparative exposure scenarios in life-cycle assessment they may be useful.

  16. The Impact of Individual In Vivo Repair of DNA Double-Strand Breaks on Oral Mucositis in Adjuvant Radiotherapy of Head-and-Neck Cancer

    SciTech Connect (OSTI)

    Fleckenstein, Jochen, E-mail: rajfle@uks.eu [Department of Radiotherapy and Radiation Oncology, Saarland University Medical School, Homburg (Germany); Kuehne, Martin; Seegmueller, Katharina; Derschang, Sarah; Melchior, Patrick [Department of Radiotherapy and Radiation Oncology, Saarland University Medical School, Homburg (Germany); Graeber, Stefan [Institute for Medical Biometry, Epidemiology und Medical Informatics (IMBEI), Saarland University Medical School, Homburg (Germany); Fricke, Andreas; Ruebe, Claudia E.; Ruebe, Christian [Department of Radiotherapy and Radiation Oncology, Saarland University Medical School, Homburg (Germany)

    2011-12-01T23:59:59.000Z

    Purpose: To evaluate the impact of individual in vivo DNA double-strand break (DSB) repair capacity on the incidence of severe oral mucositis in patients with head-and-neck cancer undergoing adjuvant radiotherapy (RT) or radiochemotherapy (RCT). Patients and Methods: Thirty-one patients with resected head-and-neck cancer undergoing adjuvant RT or RCT were examined. Patients underwent RT of the primary tumor site and locoregional lymph nodes with a total dose of 60-66 Gy (single dose 2 Gy, five fractions per week). Chemotherapy consisted of two cycles of cisplatin and 5-fluorouracil. To assess DSB repair, {gamma}-H2AX foci in blood lymphocytes were quantified before and 0.5 h, 2.5 h, 5 h, and 24 h after in vivo radiation exposure (the first fraction of RT). World Health Organization scores for oral mucositis were documented weekly and correlated with DSB repair. Results: Sixteen patients received RT alone; 15 patients received RCT. In patients who developed Grade {>=} 3 mucositis (n = 18) the amount of unrepaired DSBs 24 h after radiation exposure and DSB repair half-times did not differ significantly from patients with Grade {<=}2 mucositis (n = 13). Patients with a proportion of unrepaired DSBs after 24 h higher than the mean value + one standard deviation had an increased incidence of severe oral mucositis. Conclusions: Evaluation of in vivo DSB repair by determination of {gamma}-H2AX foci loss is feasible in clinical practice and allows identification of patients with impaired DSB repair. The incidence of oral mucositis is not closely correlated with DSB repair under the evaluated conditions.

  17. Identification of Intrinsic Order and Disorder in the DNA Repair Protein XPA

    SciTech Connect (OSTI)

    Iakoucheva, Lilia M.; Kimzey, Amy L.; Masselon, Christophe D.; Bruce, James E.; Garner, Ethan C.; Brown, Celeste J.; Dunker, A. K.; Smith, Richard D.; Ackerman, Eric J.

    2001-03-01T23:59:59.000Z

    The damage recognition protein XPA is required to recognize a wide variety of bulky lesions during nucleotide excision repair (NER). Independent NMR solution structures of a human XPA protein (hXPA) fragment comprising approximately one-third of the full-length protein, the minimal DNA-binding domain (MBD), revealed that ~30% of the molecule was structurally disordered. To better characterize structural features of XPA, we performed time-resolved trypsin proteolysis on active, full-length recombinant Xenopus XPA protein (xXPA). The resulting proteolytic fragments were analyzed by electrospray ionization interface coupled to a Fourier transform ion cyclotron resonance (ESI-FTICR) mass spectrometry, SDS-polyacrylamide gel electrophoresis (PAGE), and selected N-terminal sequence determinations. The mass spectrum of the full-length xXPA was consistent with the predicted sequence, 30922.02 vs. 30922.45 Da; respectively. Moreover, the mass spectrometric data allowed the assignment of multiple xXPA fragments not resolvable by SDS PAGE. Full-length xXPA exhibited aberrant mobility on SDS-PAGE with an apparent MW of ~40 kDa. To test predictions that a Glu-rich region (E70-E76) or other local regions of high charge were responsible for this ~40% aberrant SDS-PAGE mobility, the MW's of partial proteolytic fragments from ~5 to 25 kDa precisely determined by ESI-FTICR MS were correlated with their gel positions. Surprisingly, all tested partial tryptic fragments within this size-range exhibited 10-42% divergence between calculated MW and that estimated by SDS-PAGE, thus indicating the origin of anomalous migration of XPA is not localized. The computer program Predictor of Natural Disordered Regions (PONDR) correctly identified several regions of xXPA either sensitive or resistant to partial proteolysis, thereby indicating that disorder in XPA shares sequence features with other well-characterized intrinsically unstructured proteins.

  18. Environmental Assessment and Finding of No Significant Impact: Pond B Dam Repair Project at the Savannah River Site

    SciTech Connect (OSTI)

    N /A

    1999-09-27T23:59:59.000Z

    The Department of Energy (DOE) has prepared an environmental assessment (EA) (DOE/EA-1285) for the proposed repair of the Pond B dam at the Savannah River Site (SRS), located near Aiken, South Carolina. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an environmental impact statement (EIS) is not required, and DOE is issuing this Finding of No Significant Impact (FONSI) and Floodplain Statement of Findings.

  19. RADIATION SENSITIVITY & PROCESSING OF DNA DAMAGE FOLLOWING LOW DOSES OF GAMMA-RAY ALPHA PARTICLES & HZE IRRADIATION OF NORMAL DSB REPAIR DEFICIENT CELLS

    SciTech Connect (OSTI)

    O'Neil, Peter

    2009-05-15T23:59:59.000Z

    Non-homologous end joining (NHEJ) predominates in the repair of DNA double strand breaks (DSB) over homologous recombination (HR). NHEJ occurs throughout the cell cycle whereas HR occurs in late S/G2 due to the requirement of a sister chromatid (Rothkamm et al, Mol Cell Biol 23 5706-15 [2003]). To date evidence obtained with DSB repair deficient cells using pulsed-field gel electrophoresis has revealed the major pathway throughout all phases of the cell cycle for processing high dose induced DSBs is NHEJ (Wang et al, Oncogene 20 2212-24 (2001); Pluth et al, Cancer Res. 61 2649-55 [2001]). These findings however were obtained at high doses when on average >> 20-30 DSBs are formed per cell. The contribution of the repair pathways (NHEJ and HR) induced in response to DNA damage during the various phases of the cell cycle may depend upon the dose (the level of initial DSBs) especially since low levels of DSBs are induced at low dose. To date, low dose studies using NHEJ and HR deficient mutants have not been carried out to address this important question with radiations of different quality. The work presented here leads us to suggest that HR plays a relatively minor role in the repair of radiation-induced prompt DSBs. SSBs lead to the induction of DSBs which are associated specifically with S-phase cells consistent with the idea that they are formed at stalled replication forks in which HR plays a major role in repair. That DNA-PKcs is in some way involved in the repair of the precursors to replication-induced DSB remains an open question. Persistent non-DSB oxidative damage also leads to an increase in RAD51 positive DSBs. Both simple and complex non-DSB DNA damage may therefore contribute to indirect DSBs induced by ionising radiation at replication forks.

  20. Foodservice yield and fabrication times for beef as influenced by purchasing options and merchandising styles

    E-Print Network [OSTI]

    Weatherly, Benjamin Harrison

    1999-01-01T23:59:59.000Z

    . In addition, the technician assured that each test was thoroughly completed and balanced before proceeding to the next cutting test. All subprimals were weighed before fabrication to ensure that combined ending weights (after cutting test) were within 99/o... to the findings of McNeill et aL (1998). II Ol V3 C4 ~O r/I a b0 '8 O ~O O V O O O O on O O nn P 8 'g rn V ISO Ir ~? 'O o 4 rn g rn O nrI ~O cl O I O n w (4 C rrr O O OI Q ~ ~ ~ rh 0 rO 4 8 O O F4 rO CO rA OXHOI O rrl O 4...

  1. Cutability, bacterial control and packaging effects on the merchandising of lamb

    E-Print Network [OSTI]

    Varnadore, William Lee

    1972-01-01T23:59:59.000Z

    -life, quality and palata- bility of lamb cuts. Lamb carcasses were fabricated into 384 primal cuts which were used in packaging studies designed to compare chamber, rotating nozzle and stationary nozzle vacuum machines; barrier bags, saran bags, soft film... wraps, cheesecloth and paraffin coat1ngs, and saran pouches; and high vacuum, low vacuum and carbon dioxide atmospheres. Lamb cuts that were stored in barr1er bags under high levels of vacuum created in a chamber machine, satis- factorily maintained...

  2. General Merchandise 2009 TSD Chicago High Plug Load 50% Energy Savings |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpen Energy InformationOpen

  3. General Merchandise 2009 TSD Chicago High Plug Load Baseline | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpen Energy

  4. General Merchandise 2009 TSD Chicago Low Plug Load 50% Energy Savings |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpen EnergyOpen Energy

  5. General Merchandise 2009 TSD Chicago Low Plug Load Baseline | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpen EnergyOpen

  6. General Merchandise 2009 TSD Miami High Plug Load 50% Energy Savings | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpen EnergyOpenEnergy

  7. General Merchandise 2009 TSD Miami High Plug Load Baseline | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpen

  8. General Merchandise 2009 TSD Miami Low Plug Load 50% Energy Savings | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpenEnergy Information General

  9. General Merchandise 2009 TSD Miami Low Plug Load Baseline | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpenEnergy Information

  10. Genome-Wide Identification and 3D Modeling of Proteins involved in DNA Damage Recognition and Repair (Final Report)

    SciTech Connect (OSTI)

    Ruben A. Abagyan, PhD

    2004-04-15T23:59:59.000Z

    OAK-B135 DNA Damage Recognition and Repair (DDR and R) proteins play a critical role in cellular responses to low-dose radiation and are associated with cancer. the authors have performed a systematic, genome-wide computational analysis of genomic data for human genes involved in the DDR and R process. The significant achievements of this project include: (1) Construction of the computational pipeline for searching DDR and R genes, building and validation of 3D models of proteins involved in DDR and R; (2) Functional and structural annotation of the 3D models and generation of comprehensive lists of suggested knock-out mutations; (3) Important improvement of macromolecular docking technology and its application to predict the DNA-Protein complex conformation; (4) Development of a new algorithm for improved analysis of high-density oligonucleotide arrays for gene expression profiling; (5) Construction and maintenance of the DNA Damage Recognition and Repair Database; and (6) Producing 14 research papers (10 published and 4 in preparation).

  11. Exemption from Application of the Service Contract Act -Certification UT-B Contracts Div Maintenance, Calibration, or Repair of Certain Equipment

    E-Print Network [OSTI]

    Pennycook, Steve

    Exemption from Application of the Service Contract Act - Certification UT-B Contracts Div-sca-equip-certification-ext-venx-mar09.doc EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT ACT ­ MAINTENANCE, CALIBRATION, OR REPAIR to the conditions in paragraph (a) of this provision, and the Company determines that the Service Contract Act ­ (1

  12. Exemption from Application of the Service Contract Act -Requirements UT-B Contracts Div Maintenance, Calibration, or Repair of Certain Equipment

    E-Print Network [OSTI]

    Pennycook, Steve

    Exemption from Application of the Service Contract Act - Requirements UT-B Contracts Div-sca-equip-requirement-ext-jan08.doc EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT ACT ­ MAINTENANCE, CALIBRATION, OR REPAIR inapplicable, and the Agreement shall become subject to the Service Contract Act. In such case, the procedures

  13. SMITH, GLEN. Bond Characteristics and Qualifications of Adhesives for Marine Applications and Steel Pipe Repair. (Under the direction of Dr. Sami Rizkalla.)

    E-Print Network [OSTI]

    designs using new materials. Adhesives that bond metals, plastics, FRP and other materials have been used for marine application and repair of steel pipeline. #12;BOND CHARACTERISTICS AND QUALIFICATIONS OF ADHESIVES of Science Department of Civil, Construction, and Environmental Engineering Raleigh 2005 APPROVED BY

  14. By unravelling some of the mechanisms of lung injury, repair and fibrosis, Professor Bruce D Uhal's collaborative research is opening up the potential development of novel pharmaceutics

    E-Print Network [OSTI]

    Liu, Taosheng

    By unravelling some of the mechanisms of lung injury, repair and fibrosis, Professor Bruce D Uhal the biological molecules important to the function of the lungs. I was attracted to physiology because the many in your laboratory? Research in my laboratory has shown that during lung injury, Type II cells begin

  15. Repair of O sup 6 -ethylguanine in DNA protects rat 208F cells from tumorigenic conversion by N-ethyl-N-nitrosourea

    SciTech Connect (OSTI)

    Thomale, J.; Huh, Namho; Nehls, P.; Eberle, G.; Rajewsky, M.F. (Univ. of Essen Medical School (West Germany))

    1990-12-01T23:59:59.000Z

    O{sup 6}-Ethylguanine (O{sup 6}-EtGua) is one of about a dozen different alkylation products formed in the DNA of cells exposed to the alkylating N-nitroso carcinogen N-ethyl-N-nitrosourea (EtNU). The authors have evaluated selectively the relative capacity of cells for the specific enzymatic repair of O{sup 6}-EtGua as a determinant for the probability of malignant conversion. Eleven O{sup 6}-EtGua-repair-proficient (R{sup +}) variant subclones were isolated from the O{sup 6}-EtGua-repair-deficient (R{sup {minus}}) clonal rat fibroblast line 208F by selection for resistance to 1,3-bis-(2-chloroethyl)-1-nitrosourea. Contrary to the 208F wild-type cells, all variants expressed O{sup 6}-methylguanine-DNA methyltransferase activity, while both kinds of cells were deficient for repair of the DNA ethylation products O{sup 2}- and O{sup 4}-ethylthymine. After exposure to EtNU cells were analyzed for the formation of piled-up foci in monolayer culture and of anchorage-independent colonies in semisolid agar medium. No significant differences in the frequencies of piled-up foci were found between wild-type and variant cells after exposure to the major reactive metabolite of benzo(a)pyrene, (+)-7{beta},8{alpha}-dihydroxy-9,10{alpha}-epoxy7,8,9,10{alpha}-tetrahydrobenzo(a)pyrene, for which stable binding to guanine O{sup 6} in cellular DNA has not been observed. The relative capacity of cells for repair of O{sup 6}-alkylguanine is, therefore, a critical determinant for their risk of malignant conversion by N-nitroso carcinogens.

  16. Air Pollution Control Fees (Ohio)

    Broader source: Energy.gov [DOE]

    Facilities with a potential to emit any one regulated air pollutant of a quantity greater than or equal to 100 tons per year, or any one hazardous air pollutant (HAP) greater than or equal to 10...

  17. SCHEDULE OF FEES Wet Milling

    E-Print Network [OSTI]

    Illinois at Urbana-Champaign, University of

    of Agricultural and Biological Engineering Agricultural Engineering Sciences Bldg. 1304 West Pennsylvania Avenue and other factors. Tests follow strict standard operating procedures and follow methods similar to Good Laboratory Practices (GLP). Studies using fully documented GLP methods or large studies can be conducted

  18. QER- Comment of Christopher Fee

    Broader source: Energy.gov [DOE]

    Until you stop subsidizing and worshipping at the altar of Big Energy, all this "We the people" crapola is just that. We no longer have. Democracy, Mr. Reed, because our government is owned by heartless men with big pockets. Sent from my iPhone. La dee freakin' da.

  19. The soil conservation programs of the Guadalupe-Blanco River Authority and the Lower Colorado River Authority

    E-Print Network [OSTI]

    Morrison, Stanton Ross

    1951-01-01T23:59:59.000Z

    recommends a community machinery custodian who handles the service and distribution of this type of equipment avs. ilable to the community. For this service the custodian is paid a portion of the rental fee. Part of the rental charge goes into a repair... Name of machine Bermuda spri gger Hepair fee per clay of use %1 ~ 80 Custodian fee per day of use g ~ 90 Council fee per day of use Total fee per day of use @+00 Commercial fertilizer distrj'o" Greham Eoeme pic 7 Grain drill OI ~ 25...

  20. Role of Tissue Repair in Survival from S-(1,2-Dichlorovinyl)-L-Cysteine– Induced Acute Renal Tubular Necrosis in the Mouse

    E-Print Network [OSTI]

    unknown authors

    2003-01-01T23:59:59.000Z

    S-(1,2-Dichlorovinyl)-L-cysteine (DCVC), a model nephrotoxi-cant in mice, causes acute tubular necrosis and death at high doses. Our earlier studies revealed that renal tissue repair was critical for survival in mice with DCVC nephrotoxicity. The ob-jective of this study was to investigate if increasing renal tissue repair could protect mice from the lethal outcome of DCVC. Male Swiss Webster (SW) mice were administered a low dose of DCVC (15 mg/kg, ip) 72 h before injection of a normally lethal dose of DCVC (75 mg/kg, ip); this resulted in 100 % protection against the lethal effect of DCVC. Because DCVC caused twofold decrease in cytosolic and mitochondrial -lyase activity, the possibility that DCVC protection may be caused by decreased bioactivation was examined. Mercuric chloride (HgCl2, 6 mg/kg), a nephrotoxicant with no effect on -lyase activity, was administered 96 h before a lethal dose of DCVC. This also resulted in 100 % protection from the lethal effect of DCVC. In both studies total glutathione was unchanged at any time after the lethal dose of DCVC was admin-istered, obviating the role of glutathione in protection. In both cases the augmented and sustained tissue repair induced by prim-ing dose and documented by 3H-thymidine pulse labeling and immunocytochemistry for proliferating cell nuclear antigen re-sulted in 100 % survival in spite of the extensive renal injury. These findings suggest that stimulation of renal tubular repair by the priming dose, through augmented cell division, and the resistance of new cells to mechanisms of progression of injury, underlies auto- and heteroprotection against DCVC. The molecular mech-anisms may have potential application in pharmacotherapeutic intervention for treatment of acute renal failure.

  1. Repair of 254 nm ultraviolet-induced (6-4) photoproducts: monoclonal antibody recognition and differential defects in xeroderma pigmentosum complementation groups A, D, and variant

    SciTech Connect (OSTI)

    Hiramoto, T.; Matsunaga, T.; Ichihashi, M.; Nikaido, O.; Fujiwara, Y.; Mishima, Y. (Kobe Univ. (Japan))

    1989-11-01T23:59:59.000Z

    Repair kinetics of ultraviolet (UV) light-induced (6-4) photoproducts in xeroderma pigmentosum complementation group A, D, and variant cells were studied by the enzyme-linked immunosorbent assay (ELISA) using a specific monoclonal antibody raised against (6-4) photoproducts, together with unscheduled DNA synthesis (UDS) and loss of T4 endonuclease V-susceptible sites (ESS). Group AXP35KO cells completely failed to repair both ESS (cyclobutane pyrimidine dimers) and antibody-recognizing (6-4) photoproducts until tested 24 h after irradiation, and had 2% early-time UDS. Group DXP43KO cells showed about 10% removal of both (6-4) photoproducts and ESS in 24 h, despite showing a residually higher level of 40% early-time and cumulative UDS. Thus, the results substantiated the extreme UV hypersensitivity of XP group A and D cells. However, XP52KO variant cells exhibited the normal level of UDS and ESS loss, but a slightly reduced repair of antibody-recognizing (6-4) photoproducts at 6 and 12 h after irradiation, which may account for a small UV hypersensitivity of the XP variant cells.

  2. Mutagenic processing and strand-specific repair of solar light-induced dipyrimidine photoproducts in rodent cells

    SciTech Connect (OSTI)

    Drobetsky, E.A. [Hopital Maisonneuve-Rosemont, Montreal (Canada); Sage, E. [Institut Curie, Paris (France)

    1994-12-31T23:59:59.000Z

    Although mutations induced by {open_quotes}UVC-like{close_quotes} dipyrimidine photoproducts during sunlight exposure have been directly implicated in multistage photocarcinogenesis, the utility of 254nm UV as a paradigm for broad spectrum solar mutagenesis is questionable. To address this issue, the spectrum of mutations induced by simulated sunlight (SSL) at the adrenine phosphoribosyltransferase locus of Chinese hamster ovary cells has been characterized, and aligned with that previously established for 254nm UV in the same gene. Virtually all SSL-induced events were recovered at potential dinucleotide target sites, most of which could also be implicated in UVC mutagenesis, confirming a preeminent role for cyclobutane dimers and/or (6-4) photoproducts in sunlight-exposed rodent cells. However, striking differences were also noted in the frequency and distribution of mutational classes generated by SSL vs. UVc. Whereas C->T transitions were clearly the most frequent UVC-induced event (58%), three types of base substitution contributed substantially to the SSL spectrum; C->T transitions (35%), T->G transversions (25%), and tandem double CC->TT events (25%). In addition, a significantly greater fraction of SSL-induced mutations (94%) could be attributed to dipyrimidine photoproducts on the non-transcribed strand of the aprt gene than was observed following treatment with 254nm UV (63%). Taken together, the data indicate remarkable differences between UVC- and sunlight-exposed rodent cells in the distribution, strand-specific repair, and/or metabolic processing of similar premutagenic (dipyrimidine) photoproducts.

  3. Purification, crystallization and preliminary X-ray diffraction analysis of the human mismatch repair protein MutS[beta

    SciTech Connect (OSTI)

    Tseng, Quincy; Orans, Jillian; Hast, Michael A.; Iyer, Ravi R.; Changela, Anita; Modrich, Paul L.; Beese, Lorena S. (Duke)

    2012-03-16T23:59:59.000Z

    MutS{beta} is a eukaryotic mismatch repair protein that preferentially targets extrahelical unpaired nucleotides and shares partial functional redundancy with MutS{alpha} (MSH2-MSH6). Although mismatch recognition by MutS{alpha} has been shown to involve a conserved Phe-X-Glu motif, little is known about the lesion-binding mechanism of MutS{beta}. Combined MSH3/MSH6 deficiency triggers a strong predisposition to cancer in mice and defects in msh2 and msh6 account for roughly half of hereditary nonpolyposis colorectal cancer mutations. These three MutS homologs are also believed to play a role in trinucleotide repeat instability, which is a hallmark of many neurodegenerative disorders. The baculovirus overexpression and purification of recombinant human MutS{beta} and three truncation mutants are presented here. Binding assays with heteroduplex DNA were carried out for biochemical characterization. Crystallization and preliminary X-ray diffraction analysis of the protein bound to a heteroduplex DNA substrate are also reported.

  4. A novel role for Gadd45? in base excision repair: Modulation of APE1 activity by the direct interaction of Gadd45? with PCNA

    SciTech Connect (OSTI)

    Kim, Hye Lim [Department of Life Science, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 100-715 (Korea, Republic of) [Department of Life Science, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 100-715 (Korea, Republic of); Institute of Environmental Medicine for Green Chemistry, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 100-715 (Korea, Republic of); Department of Pharmacology, Institute for Biomedical Science (IBMS), School of Medicine, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Kim, Sang Uk [School of Interdisciplinary Bioscience and Bioengineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of) [School of Interdisciplinary Bioscience and Bioengineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); Division of Molecular and Life Science, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); Seo, Young Rok, E-mail: seoyr1@naver.com [Department of Life Science, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 100-715 (Korea, Republic of); Institute of Environmental Medicine for Green Chemistry, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 100-715 (Korea, Republic of); Department of Pharmacology, Institute for Biomedical Science (IBMS), School of Medicine, Kyung Hee University, Seoul 130-701 (Korea, Republic of)

    2013-05-03T23:59:59.000Z

    Highlights: ? Emerging critical role for Gadd45? in modulating BER activity. ? Identifying specific PCNA binding site on Gadd45? protein. ? Regulating APE1 activity through interaction between Gadd45? and PCNA. ? Suggesting potential role of Gadd45?–PCNA binding in pancreatic carcinogenesis. -- Abstract: The growth arrest and DNA damage inducible, alpha (Gadd45?) protein regulates DNA repair by interacting with proliferating cell nuclear antigen (PCNA). Our previous study suggested a potential role for Gadd45? in the base excision repair (BER) pathway by affecting apurinic/apyrimidinic endonuclease 1 (APE1) protein in addition to its accepted role in nucleotide excision repair (NER). Here, we investigated whether the interaction of Gadd45? with PCNA affects APE1 activity. To address this issue, we used a siRNA directed to Gadd45? and a form of Gadd45? with a mutation to the predicted site of PCNA binding. There was a reduction of APE1 activity in cells transfected with the Gadd45? siRNA. Furthermore, the interaction of Gadd45? with PCNA and APE1 was lower in cells transfected with mutant Gadd45? compared with cells transfected with wild-type Gadd45?. Indeed, we observed that the APE1 activity in the Gadd45?-interacting complex was significantly lower in cells that overexpress mutant Gadd45? compared with cells that overexpress wild-type Gadd45?. We conclude that the PCNA binding site on Gadd45? plays a critical role in modulating the interaction with PCNA and APE1, affecting BER activity. These results provide novel insights into the mechanisms by which BER activity is modulated, although the interaction of Gadd45? with APE1 needs to be clarified.

  5. Conserved structural chemistry for incision activity in structurally non-homologous apurinic/apyrimidinic endonuclease APE1 and endonuclease IV DNA repair enzymes.

    SciTech Connect (OSTI)

    Tsutakawa, Susan E.; Shin, David S.; Mol, Clifford D.; Izum, Tadahide; Arvai, Andrew S.; Mantha, Anil K.; Szczesny, Bartosz; Ivanov, Ivaylo N.; Hosfield, David J.; Maiti, Buddhadev; Pique, Mike E.; Frankel, Kenneth A.; Hitomi, Kenichi; Cunningham, Richard P.; Mitra, Sankar; Tainer, John A.

    2013-03-22T23:59:59.000Z

    Non-coding apurinic/apyrimidinic (AP) sites in DNA form spontaneously and as DNA base excision repair intermediates are the most common toxic and mutagenic in vivo DNA lesion. For repair, AP sites must be processed by 5' AP endonucleases in initial stages of base repair. Human APE1 and bacterial Nfo represent the two conserved 5' AP endonuclease families in the biosphere; they both recognize AP sites and incise the phosphodiester backbone 5' to the lesion, yet they lack similar structures and metal ion requirements. Here, we determined and analyzed crystal structures of a 2.4 ? resolution APE1-DNA product complex with Mg(2+) and a 0.92 Nfo with three metal ions. Structural and biochemical comparisons of these two evolutionarily distinct enzymes characterize key APE1 catalytic residues that are potentially functionally similar to Nfo active site components, as further tested and supported by computational analyses. We observe a magnesium-water cluster in the APE1 active site, with only Glu-96 forming the direct protein coordination to the Mg(2+). Despite differences in structure and metal requirements of APE1 and Nfo, comparison of their active site structures surprisingly reveals strong geometric conservation of the catalytic reaction, with APE1 catalytic side chains positioned analogously to Nfo metal positions, suggesting surprising functional equivalence between Nfo metal ions and APE1 residues. The finding that APE1 residues are positioned to substitute for Nfo metal ions is supported by the impact of mutations on activity. Collectively, the results illuminate the activities of residues, metal ions, and active site features for abasic site endonucleases.

  6. Remote repair appliance

    DOE Patents [OSTI]

    Heumann, F.K.; Wilkinson, J.C.; Wooding, D.R.

    1997-12-16T23:59:59.000Z

    A remote appliance for supporting a tool for performing work at a work site on a substantially circular bore of a work piece and for providing video signals of the work site to a remote monitor comprises: a base plate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the base plate and positioned to roll against the bore of the work piece when the base plate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the base plate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the base plate such that the working end of the tool is positioned on the inner face side of the base plate; a camera for providing video signals of the work site to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the base plate, the camera holding means being adjustably attached to the outer face of the base plate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris. 5 figs.

  7. Remote repair appliance

    DOE Patents [OSTI]

    Heumann, Frederick K. (Ballston Spa, NY); Wilkinson, Jay C. (Ballston Spa, NY); Wooding, David R. (Saratoga Springs, NY)

    1997-01-01T23:59:59.000Z

    A remote appliance for supporting a tool for performing work at a worksite on a substantially circular bore of a workpiece and for providing video signals of the worksite to a remote monitor comprising: a baseplate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the baseplate and positioned to roll against the bore of the workpiece when the baseplate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the baseplate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the baseplate such that the working end of the tool is positioned on the inner face side of the baseplate; a camera for providing video signals of the worksite to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the baseplate, the camera holding means being adjustably attached to the outer face of the baseplate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris.

  8. Overview: Recycling and Repair

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    supports the deployment of advanced lightweighting materials Increased use of recycledrenewable materials is one of the three technology specific Materials goals for 2010...

  9. Service and Repair Work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariate Metal-Organic Frameworks |

  10. Motor Repair Tech Brief

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment3311,OfficialProductsUptake and Release:Characteristics | Department

  11. 'Escherichia Coli' MutS Tetramerization Domain Structure Reveals That Stable Dimers But Not Tetramers are Essential for DNA Mismatch Repair in Vivo

    SciTech Connect (OSTI)

    Mendillo, M.L.; Putnam, C.D.; Kolodner, R.D.; /UC, San Diego

    2007-07-10T23:59:59.000Z

    The E. coli mispair binding protein MutS forms dimers and tetramers in vitro, although the functional form in vivo is under debate. Here we demonstrate that the MutS tetramer is extended in solution using small angle x-ray scattering (SAXS) and the crystal structure of the C-terminal 34 amino acids of MutS containing the tetramer-forming domain fused to maltose binding protein (MBP). Wild-type C-terminal MBP fusions formed tetramers and could bind MutS and MutS-MutL-DNA complexes. In contrast, Asp835Arg and Arg840Glu mutations predicted to disrupt tetrameric interactions only allowed dimerization of MBP. A chromosomal MutS truncation mutation eliminating the dimerization/tetramerization domain eliminated mismatch repair, whereas the tetramer-disrupting MutS Asp835Arg and Arg840Glu mutations only modestly affected MutS function. These results demonstrate that dimerization but not tetramerization of the MutS C- terminus is essential for mismatch repair.

  12. S. 2375: a bill to disapprove of certain deferrals of Strategic Petroleum Reserve budget authority, to authorize additional appropriations with respect to the Strategic Petroleum Reserve, and to increase oil import fees. Introduced in the Senate of the United States, Ninety-Ninth Congress, Second Session, April 28, 1986

    SciTech Connect (OSTI)

    Not Available

    1986-01-01T23:59:59.000Z

    The purpose of this bill is to disapprove of certain deferrals of the Strategic Petroleum Reserve (SPR) budget authority, to authorize additional appropriations to the SPR, and to increase oil import fees. The bill authorizes $1 billion for fiscal years 1987, 88, and 89 for crude oil acquisitions for the SPR and $163 million for storage and related facility construction during 1987. It also instructs the Energy Secretary to cease production from the Naval Petroleum Reserve at Elk Hills for six months to allow the reservoir depletion to stabilize.

  13. Damage-prone regions in structural composite materials are difficult to detect and even harder to repair. Damage is preceded by complex spatial and temporal changes in stress state, and it is

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Materials Seminar Damage-prone regions in structural composite materials are difficult to detect and even harder to repair. Damage is preceded by complex spatial and temporal changes in stress state about in response to damage or high-stress conditions include: (1) signal generation to warn of ensuing

  14. CT Imaging Findings and Their Relevance to the Clinical Outcomes After Stent Graft Repair of Penetrating Aortic Ulcers: Six-year, Single-center Experience

    SciTech Connect (OSTI)

    Shin, Ji Hoon [University of Ulsan College of Medicine, Asan Medical Center, Department of Radiology and Research Institute of Radiology (Korea, Republic of); Angle, John F.; Park, Auh Whan; Anderson, Curtis; Sabri, Saher S.; Turba, Ulku C. [University of Virginia Health System, Division of Angiography, Interventional Radiology and Special Procedures, Department of Radiology (United States); Kern, John A.; Cherry, Kenneth J. [University of Virginia Health System, Department of Surgery (United States); Matsumoto, Alan H., E-mail: ahm4d@virginia.edu [University of Virginia Health System, Division of Angiography, Interventional Radiology and Special Procedures, Department of Radiology (United States)

    2012-12-15T23:59:59.000Z

    Purpose: To present the computed tomographic (CT) imaging findings and their relevance to clinical outcomes related to stent graft placement in patients with penetrating aortic ulcers (PAUs). Methods: Medical and imaging records and imaging studies were reviewed for consecutive patients who underwent stent graft repair of a PAU. The distribution and characteristics of the PAU, technical success of stent graft repair, procedure-related complications, associated aortic wall abnormalities, and outcomes of the PAUs at follow-up CT scans were evaluated. Results: Fifteen patients underwent endovascular treatment for PAU. A total of 87% of the PAUs were in the proximal (n = 8) or distal (n = 5) descending thoracic aorta. There was a broad spectrum of PAU depth (mean, 7.9 {+-} 5.6 mm; range 1.5-25.0 mm) and diameter (mean, 13.5 {+-} 9.7 mm; range 2.2-41.0 mm). Atherosclerosis of the thoracic aorta and intramural hematoma were associated in 53 and 93% of the patients, respectively. Technical success was achieved in 100%. Two or more stent grafts were used in five patients. Endoleaks were observed in two patients within 2 weeks of the procedure, both of which resolved spontaneously. At follow-up CT scanning, regression and thrombosis of the PAUs were observed in all patients. The average patient survival was 61.8 months, with an overall mortality of 13% (2 of 15) at follow-up. Neither death was related to the endograft device or the PAU. Conclusion: Endovascular stent graft placement was safe and effective in causing regression and thrombosis of PAUs in this small series of patients. Two or more stent grafts were used in five patients (33%) with associated long-segmental atherosclerotic changes of the thoracic aorta or intramural hematoma.

  15. Distinct kinetics of human DNA ligases I, IIIalpha, IIIbeta, and IV reveal direct DNA sensing ability and differential physiological functions in DNA repair

    SciTech Connect (OSTI)

    Chen, Xi; Ballin, Jeff D.; Della-Maria, Julie; Tsai, Miaw-Sheue; White, Elizabeth J.; Tomkinson, Alan E.; Wilson, Gerald M.

    2009-05-11T23:59:59.000Z

    The three human LIG genes encode polypeptides that catalyze phosphodiester bond formation during DNA replication, recombination and repair. While numerous studies have identified protein partners of the human DNA ligases (hLigs), there has been little characterization of the catalytic properties of these enzymes. In this study, we developed and optimized a fluorescence-based DNA ligation assay to characterize the activities of purified hLigs. Although hLigI joins DNA nicks, it has no detectable activity on linear duplex DNA substrates with short, cohesive single-strand ends. By contrast, hLigIII{beta} and the hLigIII{alpha}/XRCC1 and hLigIV/XRCC4 complexes are active on both nicked and linear duplex DNA substrates. Surprisingly, hLigIV/XRCC4, which is a key component of the major non-homologous end joining (NHEJ) pathway, is significantly less active than hLigIII on a linear duplex DNA substrate. Notably, hLigIV/XRCC4 molecules only catalyze a single ligation event in the absence or presence of ATP. The failure to catalyze subsequent ligation events reflects a defect in the enzyme-adenylation step of the next ligation reaction and suggests that, unless there is an in vivo mechanism to reactivate DNA ligase IV/XRCC4 following phosphodiester bond formation, the cellular NHEJ capacity will be determined by the number of adenylated DNA ligaseIV/XRCC4 molecules.

  16. Operating Permits and Emission Fees (New Mexico)

    Broader source: Energy.gov [DOE]

    The New Mexico Environment Department's Air Quality Bureau processes permit applications for industries that emit pollutants to the air. The Permitting Section consists of three units, the Minor...

  17. ANALYTICAL SERVICE FEES AGRICULTURAL DIAGNOSTIC SERVICE CENTER

    E-Print Network [OSTI]

    Dong, Yingfei

    .......................................................................................................... $ 7.00 F3 Crude Protein (CP) ........................................................................................ $ 7.00 F4 Crude Fat (EE

  18. Construction Permits and Fees (New Mexico)

    Broader source: Energy.gov [DOE]

    Industries that wish to build or modify facilities that emit air pollutants (emissions) into the air must obtain an air quality permit prior to constructing. Thus, these permits are called...

  19. Exploratory Study: Vehicle Mileage Fees in Texas

    E-Print Network [OSTI]

    Powered Vehicles in Texas Estimated Fleetwide Fuel Efficiency of Gasoline Powered Vehicles in Texas 20 25 gy, gy f , gy 90% 100% Other (EV, Plugin 70% 80% Hybrid, CNG, LPG, Fuel Cell) Electric Gasoline 10% 20% Conventional Passenger Vehicles 0% 2010 2015 2020 2025 2030 2035 #12;Projected Fuel Tax

  20. Department of Radiology Standard Fees for Research

    E-Print Network [OSTI]

    , MR, PET, PET/CT 55 55 Ultrasound 75 75 *Contact Multi D lab (684-7469) IMAGING STUDIES CENTER.duke.edu/ Micro PET/CT - small animals *contact Bennett Chin (684-7698) Industry NIH Animal Scan Use/Hour 250 125 OTHER SCANS (CT, ULTRASOUND, PET ETC)*contact Susan Hall 684-7686 This equipment is owned by Duke

  1. *PLACE OF STUDY ANNUAL TUITION FEE

    E-Print Network [OSTI]

    .au.dk/digitalliving MA IN DIGITAL LIVING* WORK AND SOCIAL LIFE IN AN ERA OF SMART MACHINES & SOCIAL MEDIA Digital Living work to incorporate digital media as part of organizational change management. They could con- duct studies, communication studies, internet studies, and other disciplines whereby digital media

  2. EM Contractor Fee Payments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised FindingDepartmentDepartmentStatementEnergy EMEM

  3. WEIGHTED GUIDELINES PROFIT/FEE OBJECTIVE

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradley Nickell Director of Transmission Planning -

  4. Paid to Binghamton University Program Fee

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Business in China: An Emerging Market Summer 2011 Estimate of Costs All cost estimates are subject or renew one) 138.00$ 138.00$ Visa 130.00$ 130.00$ Personal Expenses 200.00$ 200.00$ Total Estimated Costs to change without notice. Due to inflation and fluctuations in exchange rates, actual costs may differ

  5. FY 14 Award Fee Determination Scorecard

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of YearFLASH2011-17-OPAMDepartmentofof EnergyOverview

  6. Microsoft Word - FY14 NWP Fee Scorecards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighandSWPA / SPRA / USACE SWPAURTeC:8CO 2Dances7,7,PropertyBSCFed.docFY14

  7. Revenue From Contractor Fees | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy at Waste-to-Energy usingofRetrofitting Doors on OpenRevenue From Contractor

  8. Revenue From Contractor Fees | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMay 2015 <Department of ii iii ACKNOWLEDGEMENTS This study

  9. CONCUR: AWARD FEE PLAN - FY15

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergy Bush HydrogenEmissions and the EffectsEnergyB-1DidCONCUR:

  10. RL's Fiscal Year 2013 Fee Evaluation Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70COMMUNITYResponses:December 11,Release date: Todd A.Take

  11. RL's Fiscal Year 2013 Fee Evaluation Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70COMMUNITYResponses:December 11,Release date: Todd

  12. Automotive Repair Shops Case Study ME 4171 Automotive Repair Shops

    E-Print Network [OSTI]

    include toxic and ignitable thinners, toxic paint wastes, paint sludges and oil- and solventcontaminated, these shops produce hazardous waste streams which include waste oils, oil filters, engine/hydraulic fluids can straighten bent frames, align hoods and fenders, and adjust panels. Oil is essential to the proper

  13. DNA demethylation by DNA repair

    E-Print Network [OSTI]

    Gehring, Mary

    Active DNA demethylation underlies key facets of reproduction in flowering plants and mammals and serves a general genome housekeeping function in plants. A family of 5-methylcytosine DNA glycosylases catalyzes plant ...

  14. Title 43 CFR 3000.12 What is the Fee Schedule for Fixed Fees? | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolarTharaldson EthanolTillson,OpenOpen|Amendment Jump

  15. MERCHOP (Merchandising Optimizer): A dynamic programming model for estimating the harvest value of unthinned loblolly and slash pine plantations. Forest Service research paper

    SciTech Connect (OSTI)

    Busby, R.L.; Ward, K.B.

    1989-01-01T23:59:59.000Z

    A model was devised to estimate the harvest value of unthinned loblolly and slash pine (pinus taeda L. and P. elliottii var. elliottii Englm.) plantations in the west gulf region. The model, MERCHOP, can be used to forecast product volumes and values; the output provided is partitioned into 1-inch tree d.b.h. classes. Using a dynamic programming algorithm, MERCHOP can be used to convert stand tables predicted by USLYCOWG's three-parameter Weibull function into a listing of seven products that maximizes the selling value of the stand, assuming the assumptions used in the analysis are correct.

  16. UMD Parking Rates & Fees 2012/13 2014/15

    E-Print Network [OSTI]

    Amin, S. Massoud

    2012-13 Actual 2013-14 Proposed 2014-15 Green Permit $226.00 / yr $15.00 / wk $232.00 / yr $15.00 / wk $232.00 / yr $15.00 / wk Gold Permit $379.00 / yr $390.00 / yr $390.00 / yr White Permit Not Applicable $120

  17. Workshop Registration The workshop registration fee includes workshop

    E-Print Network [OSTI]

    the environmental impact of land management practices on different soilpatternsandlandusepatterns.SWATiswidelyusedinassessing soil erosion prevention and control, non-point source pollution control and regional management applications · Sensitivity, calibration and uncertainty · Biofuel and plant growth · Environmental applications

  18. STUDENT HEALTH SERVICES Common Extra Fees for Students -Supplies

    E-Print Network [OSTI]

    Tullos, Desiree

    cushions $9.00-$21.00 Heel lift $3.00 Heel pads, felt (4) $2.00 Ice pack ­ large $3.00 Ice pack ­ small $2

  19. Short Wavelength Seeding through Compression for Fee Electron Lasers

    E-Print Network [OSTI]

    Qiang, Ji

    2010-01-01T23:59:59.000Z

    tunable short wavelength free electron lasers (FELs) providereduces the laser power needed for the generation of shortbetween the laser ?eld and the electron beam inside a short

  20. Table of Contents 1065 DAYLIGHT OVERDRAFT FEES AND THE

    E-Print Network [OSTI]

    Joseph R. Coyne; Chairman S. David; Frost Griffith; L. Garwood; Donald L. Kohn; J. Virgil Mattingly, Jr.; Michael; J. Prell; Richard Spillenkothen; Edwin M. Truman; Risk Policy

    1995-01-01T23:59:59.000Z

    The Federal Reserve Bulletin is issued monthly under the direction of the staff publications committee. This committee is responsible for opinions expressed except in official statements and signed articles. It is assisted by the Economic Editing Section headed by S. Ellen Dykes, the Graphics Center under the direction of Peter G. Thomas, and Publications Services supervised by Linda C. Kyles. Digitized for FRASER Federal Reserve Bank of St. Louis

  1. Can the Trucking Industry Benefit From Distance-Based Fees?

    E-Print Network [OSTI]

    Minnesota, University of

    capital cost: $129 billion (over 30 years); today's reconstruction cost estimate: $1.3 to $2.5 trillion trucks pay more · Neither trucks nor cars pay for most cost externalities · Estimated THF revenues: $32B and other highways Comments: · Initial capital and ongoing maintenance costs were paid for · The system

  2. The FY 1998 Battelle performance evaluation and incentive fee agreement

    SciTech Connect (OSTI)

    Davis, T.L.

    1998-01-07T23:59:59.000Z

    Fiscal Year 1998 represents the second full year utilizing a results-oriented, performance-based contract. This document describes the critical outcomes, objectives, performance indicators, expected levels of performance, and the basis for the evaluation of the Contractors performance for the period October 1, 1997 through September 30, 1998, as required by Articles entitled Use of Objective Standards of Performance, Self Assessment and Performance Evaluation and Critical Outcomes Review of the Contract DE-AC06-76RL01830. In partnership with the Contractor and other key customers, the Department of Energy (DOE) Richland Operations Office has defined six critical outcomes that serve as the core for the Contractors performance evaluation. The Contractor also utilizes these outcomes as a basis for overall management of the Laboratory. The Critical Outcome system focuses all of the customer desires into specific objectives and performance indicators, with supporting measures to track and foster continued improvement in meeting the needs (outcomes) of the Laboratory`s customers. Section 1 provides information on how the overall performance rating for the Contractor will be determined. Section 2 provides the detailed information concerning critical outcomes, objectives, performance indicators and expectations of performance. Section 3 describes the commitments for documenting and reporting the Laboratory`s self-evaluation.

  3. Quarterly Tuition and Fees2013-14 Bothell Campus

    E-Print Network [OSTI]

    Van Volkenburgh, Elizabeth

    ,383.00 $2,383.00$18.00 $0.00 $2,506.28 $132.31 $2,638.59 $29.40 $91.017 $0.00 $0.00$0.00 $2,780.00 $2

  4. Quarterly Tuition and Fees2012-13 Bothell Campus

    E-Print Network [OSTI]

    Van Volkenburgh, Elizabeth

    ,383.00 $2,383.00$18.00 $0.00 $2,506.28 $132.31 $2,638.59 $29.40 $91.017 $0.00 $0.00$0.00 $2,780.00 $2

  5. Request for Withdrawal Office of the Registrar, Tuition and Fees

    E-Print Network [OSTI]

    Mailing Address Street City, State or Country, Zip Code Iowa State University requests withdrawal. Preferred Phone Number Entry Date Ethnic CodeType Resid. Code P code off Advisers: make sure by law to have the approval of one of the international student advisers (Designated School Officials

  6. COMPUTER FEE ALLOCATION COMMITTEE PROPOSAL MONTANA STATE UNIVERSITY

    E-Print Network [OSTI]

    Lawrence, Rick L.

    as an end-of-project assessment. 7. Provide a prioritized list of HARDWARE/EQUIPMENT and the estimated cost

  7. COMPUTER FEE ALLOCATION COMMITTEE PROPOSAL MONTANA STATE UNIVERSITY

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    an annual progress report as well as an end-of-project assessment. 7. Provide a prioritized list of HARDWARE

  8. Manor Farm Permit Fees from 1 March 2014 Staff permits

    E-Print Network [OSTI]

    Doran, Simon J.

    -Site: low * £18.42 per month Car Share Permit * £82.00 per annum 2 or more University motorists sharing: Permit Type £ Notes Essential Use £201.00 per annum Car Share £80.00 per annum 2 or more University motorists sharing SOUPS Permits £8.75 for an allocation of 5 Maximum of 120 in an academic year University

  9. AWARD FEE DETERMINATION SCORECARD Contractor: Fluor-B&W Portsmouth...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Quality and Effectiveness in performing Environmental Safety, Health, and Quality (ESH&Q) and Regulatory. Ability to demonstrate a strong culture including strict compliance...

  10. AWARD FEE PLAN FOR Facility Support Services Contract (Wastren...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    contractor on day one of the contract. 7. Environmental Safety, Health, and Quality (ESH&Q) (All Performance Categories) Ll A. OSHA Total Recordable Case (TRC) B. Days Away...

  11. AWARD FEE PLAN FOR Babcock and Wilcox Conversion Services, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services, LLC Second Period -October 1, 2012 through September 30, 2013 Operations of Depleted Uranium Hexafluoride (DUF 6 ) Conversion Facilities at Paducah, Kentucky and...

  12. City of Tucson- Permit Fee Credit for Solar Energy Systems

    Broader source: Energy.gov [DOE]

    The City of Tucson passed Resolution No. 20193 on September 27, 2005, to encourage the installation of solar energy systems throughout the city. The resolution established a policy whereby the...

  13. FY 2007 Fee Adequacy, Pub 2008 | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of YearFLASH2011-17-OPAMDepartmentofof EnergyOverview46 Report toFY

  14. Contractor Fee Payments - Carlsbad Field Office | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergy AwardedFirstThirdCarlsbad

  15. Contractor Fee Payments - Idaho Operations Office | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergy

  16. Contractor Fee Payments - Oak Ridge Operations | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak Ridge Operations

  17. Contractor Fee Payments - Office of River Protection | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak Ridge OperationsOffice

  18. Contractor Fee Payments - Portsmouth Paducah Project Office | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak Ridge

  19. Contractor Fee Payments - Richland Operations Office | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak RidgeRichland

  20. Contractor Fee Payments - Savannah River Site Office | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak RidgeRichlandSavannah

  1. Contractor Fee Payments - Small Sites | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout » Contact Us Contact UsEnergyOak

  2. Privacy Act Fees and Time Limits | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved: 5-13-14 FEDERALAmerica TreatyWastewants youNationalNuclearExemptions

  3. Logistics & Fees - Combustion Energy Frontier Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |Is Your HomeLatestCenterLogging in Logging inLogistics User

  4. Alaska Division of Water Permit Fees | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1AMEEAisin Seiki G60Alameda County,90DECInformationDivision

  5. Award Fee Determination Scorecard Contractor: Mission Support Alliance, LLC (MSA)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugust AugustInstruments on the Site Contractor:

  6. Award Fee Determination Scorecard Contractor: Bechtel National, Inc. (BNI)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugust AugustInstruments on the Site Contractor:

  7. Award Fee Determination Scorecard Contractor: Bechtel National, Inc. (BNI)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugust AugustInstruments on the Site

  8. Award Fee Determination Scorecard Contractor: Washington River Protection Solutions, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugust AugustInstruments on the Site Contract: Tank

  9. Federal Court Dismisses Waste Fee Challenges | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport in RepresentativeDepartmentEnergy FactorsID-11263CircularAgencyFederal Court

  10. AWARD FEE DETERMINATION SCORECARD Contractor: Restoration Services, Inc.

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'s Reply Comments AT&T, Inc.'sGuidance forSecurity atAVTA

  11. PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) AWARD FEE PLAN (AFP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and4/26/11: eliza18 emergency3 , 2 015

  12. Idaho Water Right Applications, Forms, and Fees Webpage | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtel JumpCounty, Texas:ITCSolid Waste WebpageInformation

  13. UCOR Contract & Fee Determination | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015 -Helicopter Accident atConferenceU.S.-ChinaUCNI ReviewUCOR Contract

  14. Unique Fee-for-Service Revenues | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015 -Helicopter AccidentSeptemberDepartmentUmatillaDOEIncidentUnique

  15. WAI Contract & Fee Determination | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment of Energy MicrosoftVOLUME INovember 15-16,with|W. DavidThe

  16. Total Estimated Contract Cost: Contract Option Period: Maximum Fee

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy SolarRadioactiveI DisposalFive ThingsWesternDefinition

  17. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy SolarRadioactiveI DisposalFive FY2002 $15,829 FY2003

  18. Total Estimated Contract Cost: Performance Period Total Fee Paid

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy SolarRadioactiveI DisposalFive FY2002 $15,829 FY2003 FY2008

  19. UCOR Contract & Fee Determination | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian Nuclear Warheads into Fuel for U.S. Electricity | Department of1 I.3

  20. Department of Environmental Conservation Stormwater Program Fee Summary |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility DatabaseMichigan: Energy ResourcesDenair,DennisDenverOpen Energy

  1. Microsoft Word - FY12 Fee Des.doc

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved:AdministrationAnalysis andB - H, Page i PART I -DecemberNR0000031

  2. Title 11 Alaska Administrative Code Chapter 5 Fees | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolarTharaldson EthanolTillson, New5661°,Open Energy| Open

  3. Title 18 CFR 381 Fees | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolarTharaldson EthanolTillson,Open Energy InformationProcedure18 CFR

  4. Incentive Fee Determination Summary Contractor: Washington Closure Hanford LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News Community Connections:

  5. Microsoft Word - Award Fee Determination Scorecard for FY 2013 (4)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighandSWPA / SPRA / USACE SWPAURTeC:8 3. March 3, 20155-12, 2010 Contract:

  6. Utah Water Rights Fee Schedule | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga,planning methodologies and tools |UCInformation

  7. Animal Health Diagnostic Center Test and Fee Schedule Test Name Test Fee Discipline Test Days Lag** Samples Container Coolant Comments

    E-Print Network [OSTI]

    Keinan, Alon

    container; 2) slide mailer 1) Refrigerate. Ship in insulated container with ice pack. 2) Not required *May-3) Refrigerate. Ship in insulated container with ice pack. 4) Not required *May qualify for New York State container 1-3) Refrigerate. Ship in insulated container with ice pack For more information, see Appendix

  8. Animal Health Diagnostic Center Test and Fee Schedule Test Name Test Fee Discipline Test Days Lag** Samples Container Coolant Comments

    E-Print Network [OSTI]

    Keinan, Alon

    container; 2) slide mailer 1) Refrigerate. Ship in insulated container with ice pack. 2) Not required *May container 1-3) Refrigerate. Ship in insulated container with ice pack For more information, see Appendix in insulated container with ice pack. For more information, see Canine Adrenal & Pituitary Function Tests

  9. Animal Health Diagnostic Center Test and Fee Schedule Test Name Test Fee Discipline Test Days Lag** Samples Container Coolant Comments

    E-Print Network [OSTI]

    Keinan, Alon

    sterile container; 2) slide mailer 1) Refrigerate. Ship in insulated container with ice pack. 2) Slide mailer 1-3) Refrigerate. Ship in insulated container with ice pack. 4) Not required *May qualify; 3) sterile container 1-3) Refrigerate. Ship in insulated container with ice pack For more

  10. Animal Health Diagnostic Center Test and Fee Schedule Test Name Test Fee Discipline Test Days Lag** Samples Container Coolant Comments

    E-Print Network [OSTI]

    Keinan, Alon

    container; 2) slide mailer 1) Refrigerate. Ship in insulated container with ice pack. 2) Not required *May container 1-3) Refrigerate. Ship in insulated container with ice pack For more information, see Appendix Refrigerate. Ship in insulated container with ice pack. For more information, see Canine Adrenal Function

  11. Intelligent Self-Repairable Web Wrappers

    E-Print Network [OSTI]

    Ferrara, Emilio

    2011-01-01T23:59:59.000Z

    The amount of information available on the Web grows at an incredible high rate. Systems and procedures devised to extract these data from Web sources already exist, and different approaches and techniques have been investigated during the last years. On the one hand, reliable solutions should provide robust algorithms of Web data mining which could automatically face possible malfunctioning or failures. On the other, in literature there is a lack of solutions about the maintenance of these systems. Procedures that extract Web data may be strictly interconnected with the structure of the data source itself; thus, malfunctioning or acquisition of corrupted data could be caused, for example, by structural modifications of data sources brought by their owners. Nowadays, verification of data integrity and maintenance are mostly manually managed, in order to ensure that these systems work correctly and reliably. In this paper we propose a novel approach to create procedures able to extract data from Web sources --...

  12. Awarded Products Maintenance, Repair & Operations TOOLS & HARDWARE

    E-Print Network [OSTI]

    Tsien, Roger Y.

    Products HVAC, pumps & compressors, plumbing suppliers, paint, oil and lubricants, lumber & carpentry, rigging supplies HVAC, pumps & compressors, plumbing suppliers, paint, oil and lubricants, lumber & carpentry, rigging supplies *Also awarded for safety supplies HVAC, pumps & compressors, plumbing suppliers

  13. Reducing Your Leak Rate Without Repairing Leaks

    E-Print Network [OSTI]

    Beals, C.

    2005-01-01T23:59:59.000Z

    . It discusses how pressure/flow controllers, variable speed and variable displacement compressors, automation, and addressing critical plant pressures allow plant personnel to lower the header pressure, which eliminates artificial demand and controls the leak...

  14. Measure Guideline: Window Repair, Rehabilitation, and Replacement

    SciTech Connect (OSTI)

    Baker, P.

    2012-12-01T23:59:59.000Z

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  15. Assessment of airplane design, fabrication, and repair

    E-Print Network [OSTI]

    Stolar, Lauren (Lauren Elise)

    2009-01-01T23:59:59.000Z

    Engineering programs are most often classes dedicated to how to design things, while the topic of reverse engineering or problem solving is rarely discussed. This unequal presentation of two sides of the same discipline ...

  16. Repair welding of fusion reactor components

    SciTech Connect (OSTI)

    Chin, B.A.

    1993-05-15T23:59:59.000Z

    Experiments have shown that irradiated Type 316 stainless steel is susceptible to heat-affected-zone (HAZ) cracking upon cooling when welded using the gas tungsten arc (GTA) process under lateral constraint. The cracking has been hypothesized to be caused by stress-assisted helium bubble growth and rupture at grain boundaries. This study utilized an experimental welding setup which enabled different compressive stresses to be applied to the plates during welding. Autogenous GTA welds were produced in Type 316 stainless steel doped with 256 appm helium. The application of a compressive stress, 55 MPa, during welding suppressed the previously observed catastrophic cracking. Detailed examinations conducted after welding showed a dramatic change in helium bubble morphology. Grain boundary bubble growth along directions parallel to the weld was suppressed. Results suggest that stress-modified welding techniques may be used to suppress or eliminate helium-induced cracking during joining of irradiated materials.

  17. Haier Repair Confusion Resolved | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopmentHEADQUARTERSOutreach

  18. Overview: Recycling and Repair | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in ManyDepartmentOutreachDepartment ofProgram |Department of

  19. Selected Bibliography on Electric Motor Repair

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary of Energy Advisory BoardSecuringSee theEnergy3

  20. Motor Repair Tech Brief | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment3311,OfficialProductsUptake and Release:Characteristics |