Powered by Deep Web Technologies
Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

EA-1790: Construction and Operation of a Heterogeneous Feed Biorefinery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EA-1790: Construction and Operation of a Heterogeneous Feed EA-1790: Construction and Operation of a Heterogeneous Feed Biorefinery Enerkem Corporation Pontotoc, MS EA-1790: Construction and Operation of a Heterogeneous Feed Biorefinery Enerkem Corporation Pontotoc, MS SUMMARY The U.S. Department of Energy (DOE or the Department) is proposing to provide cost share funding to Enerkem, Inc (Enerkem) for the final design, construction, and operation of a proposed Heterogeneous Feed Biorefinery Project to be located in Pontotoc, Mississippi (hereafter referred to as the biorefinery or the proposed project). The biorefinery would use the dried and post-sorted biomass fraction of municipal solid waste (MSW) and wood biomass as feedstock. Enerkem's biorefinery would produce approximately 10 million gallons (38 million liters) of ethanol per year

2

Microsoft Word - Enerkem-Final_EA_prelim_Final legal comments.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

_______________________________________________________________________________________________ _______________________________________________________________________________________________ DOE/EA-1790 September 2010 Construction and Operation of a Heterogeneous Feed Biorefinery Enerkem Corporation Pontotoc, Mississippi Environmental Assessment DOE/EA-1790 Prepared for: U.S. Department of Energy Energy Efficiency and Renewable Energy September 2010 Contents ___________________________________________________________________________________________ DOE-EA 1790 i September 2010 CONTENTS Section Page 1.0 Introduction and purpose and need .............................................................................................. 1-1

3

Enerkem Inc | Open Energy Information  

Open Energy Info (EERE)

Enerkem Inc Enerkem Inc Jump to: navigation, search Logo: Enerkem Inc Name Enerkem Inc Address 1010, Sherbrooke West, suite 1610 Place Montreal, Quebec Zip H3A 2R7 Sector Bioenergy, Biofuels, Biomass, Carbon Product Ethanol, Methanol, Green Chemicals Year founded 2000 Number of employees 51-200 Phone number 514-875-0284 Website http://www.enerkem.com Coordinates 45.502196°, -73.57574° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.502196,"lon":-73.57574,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

4

EA-1790: Construction and Operation of a Heterogeneous Feed Biorefiner...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

use the dried and post-sorted biomass fraction of municipal solid waste (MSW) and wood biomass as feedstock. Enerkem's biorefinery would produce approximately 10 million gallons...

5

EA-1790: Finding of No Significant Impact  

Energy.gov (U.S. Department of Energy (DOE))

Construction and Operation of a Heterogeneous Feed Biorefinery, Enerkem Corporation, Pontotoc, Mississippi

6

IMPROVED BIOREFINERY FOR THE PRODUCTION OF ETHANOL, CHEMICALS, ANIMAL FEED AND BIOMATERIALS FROM SUGAR CANE  

DOE Green Energy (OSTI)

The Audubon Sugar Institute (ASI) of Louisiana State Universitys Agricultural Center (LSU AgCenter) and MBI International (MBI) sought to develop technologies that will lead to the development of a sugar-cane biorefinery, capable of supplying fuel ethanol from bagasse. Technology development focused on the conversion of bagasse, cane-leaf matter (CLM) and molasses into high value-added products that included ethanol, specialty chemicals, biomaterials and animal feed; i.e. a sugar cane-based biorefinery. The key to lignocellulosic biomass utilization is an economically feasible method (pretreatment) for separating the cellulose and the hemicellulose from the physical protection provided by lignin. An effective pretreatment disrupts physical barriers, cellulose crystallinity, and the association of lignin and hemicellulose with cellulose so that hydrolytic enzymes can access the biomass macrostructure (Teymouri et al. 2004, Laureano-Perez, 2005). We chose to focus on alkaline pretreatment methods for, and in particular, the Ammonia Fiber Expansion (AFEX) process owned by MBI. During the first two years of this program a laboratory process was established for the pretreatment of bagasse and CLM using the AFEX process. There was significant improvement of both rate and yield of glucose and xylose upon enzymatic hydrolysis of AFEX-treated bagasse and CLM compared with untreated material. Because of reactor size limitation, several other alkaline pretreatment methods were also co-investigated. They included, dilute ammonia, lime and hydroxy-hypochlorite treatments. Scale-up focused on using a dilute ammonia process as a substitute for AFEX, allowing development at a larger scale. The pretreatment of bagasse by an ammonia process, followed by saccharification and fermentation produced ethanol from bagasse. Simultaneous saccharification and fermentation (SSF) allowed two operations in the same vessel. The addition of sugarcane molasses to the hydrolysate/fermentation process yielded improvements beyond what was expected solely from the addition of sugar. In order to expand the economic potential for building a biorefinery, the conversion of enzyme hydrolysates of AFEX-treated bagasse to succinic acid was also investigated. This program established a solid basis for pre-treatment of bagasse in a manner that is feasible for producing ethanol at raw sugar mills.

Dr. Donal F. Day

2009-01-29T23:59:59.000Z

7

Definition: Biorefinery | Open Energy Information  

Open Energy Info (EERE)

Biorefinery Biorefinery Jump to: navigation, search Dictionary.png Biorefinery A facility that processes and converts biomass into value-added products, ranging from biomaterials to biofuels such as ethanol or important feedstocks for the production of chemicals.[1] View on Wikipedia Wikipedia Definition A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, heat, and value-added chemicals from biomass. The biorefinery concept is analogous to today's petroleum refinery, which produce multiple fuels and products from petroleum. The International Energy Agency Bioenergy Task 42 on Biorefineries has defined biorefining as the sustainable processing of biomass into a spectrum of bio-based products (food, feed, chemicals,

8

United Biorefineries Corp UBC | Open Energy Information  

Open Energy Info (EERE)

Biorefineries Corp UBC Biorefineries Corp UBC Jump to: navigation, search Name United Biorefineries Corp (UBC) Place Valencia, California Zip 91354-1532 Sector Biofuels Product California-based technology management company doing commercial physical & biological research. Involved in the project development of an Integrated Biorefinery Complex utilizing algae and cellulosic-based second generation biofuels technology. References United Biorefineries Corp (UBC)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. United Biorefineries Corp (UBC) is a company located in Valencia, California . References ↑ "United Biorefineries Corp (UBC)" Retrieved from "http://en.openei.org/w/index.php?title=United_Biorefineries_Corp_UBC&oldid=352515

9

NREL: Biomass Research - What Is a Biorefinery?  

NLE Websites -- All DOE Office Websites (Extended Search)

What Is a Biorefinery? What Is a Biorefinery? A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and chemicals from biomass. The biorefinery concept is analogous to today's petroleum refineries, which produce multiple fuels and products from petroleum. Industrial biorefineries have been identified as the most promising route to the creation of a new domestic biobased industry. By producing multiple products, a biorefinery can take advantage of the differences in biomass components and intermediates and maximize the value derived from the biomass feedstock. A biorefinery might, for example, produce one or several low-volume, but high-value, chemical products and a low-value, but high-volume liquid transportation fuel, while generating

10

DOE Announces $160 Million for Biorefinery Construction and Highlights...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Biorefinery Construction and Highlights New Agricultural Program to Promote Biofuels DOE Announces 160 Million for Biorefinery Construction and Highlights New...

11

Albemarle Biorefinery Inc | Open Energy Information  

Open Energy Info (EERE)

North Carolina Zip 27612 Product A subsidiary of DFI Group that focusses on the ethanol business in North Carolina, US. References Albemarle Biorefinery Inc1 LinkedIn...

12

Iogen Biorefinery Partners, LLC | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

with the flexibility to process a wide range of agricultural residues into cellulose ethanol. Iogen Biorefinery Partners, LLC More Documents & Publications RSE Pulp & Chemical,...

13

Drought-tolerant Biofuel Crops could be a Critical Hedge for Biorefineries  

E-Print Network (OSTI)

for lignocellulosic biorefineries. Biomass & Bioenergy,be a Critical Hedge for Biorefineries William R. Morrow,is to highlight the risks biorefineries may face in drought

Morrow, III, William R.

2013-01-01T23:59:59.000Z

14

NREL: Sustainable NREL - Integrated Biorefinery Research Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Biorefinery Research Facility Integrated Biorefinery Research Facility A photo of a grey, three-story research facility on a large campus. The Integrated Biorefinery Research Facility The Integrated Biorefinery Research Facility (IBRF) incorporates a large number of energy efficiency and sustainability practices into its cutting-edge design. This facility received a Leadership in Energy and Environmental Design (LEED®) Gold-level certification from the U.S. Green Building Council and supports a variety of advanced biofuels projects and enables researchers and industry partners to develop, test, evaluate, and demonstrate processes for the production of bio-based products and fuels. Fast Facts Cost: $33.5M Square feet: 27,000 Occupants: 32 Labs/Equipment: high-bay biochemical conversion pilot plant that

15

Feeding  

NLE Websites -- All DOE Office Websites (Extended Search)

Feeding Feeding the Pipeline: The SNfactory Supernova Search Richard Scalzo NERSC User Group Meeting October 4, 2005 Outline Background ● Interest in supernova science ● Observational challenges in finding supernovae The SNfactory search pipeline ● Description of hardware ● Past searches and challenges in development ● Present and future Why supernovae are interesting Two types of SNe: "type Ia" and "core-collapse". SNe Ia ● Model: Thermonuclear explosion of degenerate star(s) (carbon-oxygen white dwarf + binary companion star) ● Characteristic Si II absorption line in spectrum ● Brightness very uniform → good distance indicators Other SNe (types Ib, Ic, II) ● Gravitational collapse of core of young, massive star ● Spectra are diverse; evidence of stellar envelope (H, He) ● Rate tracks star formation rate; may be GRB progenitors SNe

16

Integrated Biorefinery Research Facility (IBRF I-II) (Post CD...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Biorefinery Research Facility (IBRF I-II) (Post CD-4), EERE, Aug 2011 Integrated Biorefinery Research Facility (IBRF I-II) (Post CD-4), EERE, Aug 2011 000521 & 000519...

17

Range Fuels Biorefinery Groundbreaking | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Range Fuels Biorefinery Groundbreaking Range Fuels Biorefinery Groundbreaking Range Fuels Biorefinery Groundbreaking November 6, 2007 - 5:00pm Addthis Remarks as Prepared for Secretary Bodman Thank you. And let me say how much it means to have my old friend Vinodh here to introduce me. You are a true pioneer in this industry. I also want to thank Mitch for asking me to be here. It's good to see Tom Dorr from the U.S. Department of Agriculture, our partner in so much of the federal government's biomass research and development and deployment efforts. Gov. Perdue, as always, it's great to be in Georgia and to see the progress occurring here under your leadership. I want to reaffirm our support for governors and state legislators who exhibit the kind of leadership you've shown in developing America's new energy future.

18

USDA - Biorefinery Assistance Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

USDA - Biorefinery Assistance Program USDA - Biorefinery Assistance Program USDA - Biorefinery Assistance Program < Back Eligibility Agricultural Commercial Construction Fed. Government Industrial Institutional Investor-Owned Utility Local Government Municipal Utility Rural Electric Cooperative State Government Tribal Government Utility Savings Category Biofuels Alternative Fuel Vehicles Bioenergy Maximum Rebate Maximum loan amount: 80% of project costs or $250 million Program Info Program Type Federal Loan Program Rebate Amount 90% maximum loan guarantee on loans of up to $125 million 80% maximum loan guarantee on loans of up $150 million 70% maximum loan guarantee on loans of $150-$200 million 60% maximum loan guarantee on loans of up to $250 million Provider U.S. Department of Agriculture USDA Rural Development is offering loan guarantees for the development,

19

Biorefinery Grant Announcement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biorefinery Grant Announcement Biorefinery Grant Announcement Biorefinery Grant Announcement February 28, 2007 - 10:28am Addthis Prepared Remarks for Energy Secretary Bodman Thank you all for coming. In his State of the Union address last month, President Bush set forth an aggressive plan to reduce America's consumption of gasoline over the next ten years. The President's "20 in 10" initiative would increase the amount of renewable and alternative fuels used in the transportation sector to 35 billion gallons a year by 2017. The announcement I am about to make will be an important step in helping us to reach that goal. Corn-based ethanol is already playing a key part in reducing our dependence on fossil fuels, and mitigating the growth of greenhouse gasses but we cannot increase our use of corn grain indefinitely. So we are very

20

Biorefinery Grant Announcement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biorefinery Grant Announcement Biorefinery Grant Announcement Biorefinery Grant Announcement February 28, 2007 - 10:28am Addthis Prepared Remarks for Energy Secretary Bodman Thank you all for coming. In his State of the Union address last month, President Bush set forth an aggressive plan to reduce America's consumption of gasoline over the next ten years. The President's "20 in 10" initiative would increase the amount of renewable and alternative fuels used in the transportation sector to 35 billion gallons a year by 2017. The announcement I am about to make will be an important step in helping us to reach that goal. Corn-based ethanol is already playing a key part in reducing our dependence on fossil fuels, and mitigating the growth of greenhouse gasses but we cannot increase our use of corn grain indefinitely. So we are very

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

USDA - Repowering Assistance Biorefinery Program (Federal) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

USDA - Repowering Assistance Biorefinery Program (Federal) USDA - Repowering Assistance Biorefinery Program (Federal) USDA - Repowering Assistance Biorefinery Program (Federal) < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Investor-Owned Utility Local Government Municipal Utility Nonprofit Rural Electric Cooperative State Government Tribal Government Utility Savings Category Biofuels Alternative Fuel Vehicles Bioenergy Maximum Rebate 50% of the total project costs Program Info Program Type Federal Grant Program Rebate Amount Varies Provider Rural Business - Cooperative Service The Repowering Assistance Program provides payments to eligible biorefineries to replace fossil fuels used to produce heat or power to operate the biorefineries with renewable biomass. Reimbursement payments are provided to offset a portion of the costs associated with the

22

New Biorefinery Will Bring Jobs to Northeastern Oregon | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Biorefinery Will Bring Jobs to Northeastern Oregon New Biorefinery Will Bring Jobs to Northeastern Oregon New Biorefinery Will Bring Jobs to Northeastern Oregon August 9, 2010 - 10:00am Addthis A computer-generate image shows the biorefinery in Boardman, Oregon. | Photo Courtesy of Matt Kegler, diagram supplied by Burns & McDonnell A computer-generate image shows the biorefinery in Boardman, Oregon. | Photo Courtesy of Matt Kegler, diagram supplied by Burns & McDonnell Lindsay Gsell Recovery Act supports construction of new biorefinery in Boardman, Ore. Facility could create 20 permanent jobs when fully operational in 2011 ZeaChem plans to work with local farmers to supply biofuel material In northeastern Oregon, ZeaChem, a Colorado-based biofuel company, recently broke ground on a 250,000 gallon integrated cellulosic biorefinery. The

23

EIS-0407: Abengoa Biorefinery Project Near Hugoton, Kansas | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

07: Abengoa Biorefinery Project Near Hugoton, Kansas 07: Abengoa Biorefinery Project Near Hugoton, Kansas EIS-0407: Abengoa Biorefinery Project Near Hugoton, Kansas Abengoa Biorefinery Project Near Hugoton, Kansas Abengoa Biorefinery Project Near Hugoton, Kansas Summary The U.S. Department of Energy (DOE or the Department) prepared an environmental impact statement (EIS) (DOE/EIS-0407) to assess the potential environmental impacts associated with the proposed action of providing Federal financial assistance to Abengoa Bioenergy Biomass of Kansas, LLC (Abengoa Bioenergy) to support the design, construction, and startup of a commercial-scale integrated biorefinery to be located near the city of Hugoton in Stevens County, southwestern Kansas. The integrated biorefinery would use a combination of biomass feedstocks,

24

New Biorefinery Will Bring Jobs to Northeastern Oregon | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Biorefinery Will Bring Jobs to Northeastern Oregon New Biorefinery Will Bring Jobs to Northeastern Oregon New Biorefinery Will Bring Jobs to Northeastern Oregon August 9, 2010 - 10:00am Addthis A computer-generate image shows the biorefinery in Boardman, Oregon. | Photo Courtesy of Matt Kegler, diagram supplied by Burns & McDonnell A computer-generate image shows the biorefinery in Boardman, Oregon. | Photo Courtesy of Matt Kegler, diagram supplied by Burns & McDonnell Lindsay Gsell Recovery Act supports construction of new biorefinery in Boardman, Ore. Facility could create 20 permanent jobs when fully operational in 2011 ZeaChem plans to work with local farmers to supply biofuel material In northeastern Oregon, ZeaChem, a Colorado-based biofuel company, recently broke ground on a 250,000 gallon integrated cellulosic biorefinery. The

25

Retrofitting analysis of integrated bio-refineries  

E-Print Network (OSTI)

A bio-refinery is a processing facility that produces liquid transportation fuels and/or value-added chemicals and other products. Because of the dwindling resources and escalating prices of fossil fuels, there are emerging situations in which the economic performance of fossil-based facilities can be enhanced by retrofitting and incorporation of bio-mass feedstocks. These systems can be regarded as bio-refineries or integrated fossilbio- refineries. This work presents a retrofitting analysis to integrated bio-refineries. Focus is given to the problem of process modification to an existing plant by considering capacity expansion and material substitution with biomass feedstocks. Process integration studies were conducted to determine cost-effective strategies for enhancing production and for incorporating biomass into the process. Energy and mass integration approaches were used to induce synergism and to reduce cost by exchanging heat, material utilities, and by sharing equipment. Cost-benefit analysis was used to guide the decision-making process and to compare various production routes. Ethanol production from two routes was used as a case study to illustrate the applicability of the proposed approach and the results were bio-refinery has become more attractive then fossil-refinery.

Cormier, Benjamin R.

2005-12-01T23:59:59.000Z

26

Biorefinery and Carbon Cycling Research Project  

Science Conference Proceedings (OSTI)

In this project we focused on several aspects of technology development that advances the formation of an integrated biorefinery. These focus areas include: [ 1] pretreatment of biomass to enhance quality of products from thermochemical conversion; [2] characterization of and development of coproduct uses; [3] advancement in fermentation of lignocellulosics and particularly C5 and C6 sugars simultaneously, and [ 4] development of algal biomass as a potential substrate for the biorefinery. These advancements are intended to provide a diverse set of product choices within the biorefinery, thus improving the cost effectiveness of the system. Technical effectiveness was demonstrated in the thermochemical product quality in the form of lower tar production, simultaneous of use of multiple sugars in fermentation, use ofbiochar in environmental (ammonia adsorption) and agricultural applications, and production of algal biomass in wastewaters. Economic feasibility of algal biomass production systems seems attractive, relative to the other options. However, further optimization in all paths, and testing/demonstration at larger scales are required to fully understand the economic viabilities. The coproducts provide a clear picture that multiple streams of value can be generated within an integrated biorefinery, and these include fuels and products.

Das, K. C., Adams; Thomas, T; Eiteman, Mark A; Kastner, James R; Mani, Sudhagar; Adolphson, Ryan

2012-06-08T23:59:59.000Z

27

Biorefinery and Hydrogen Fuel Cell Research  

Science Conference Proceedings (OSTI)

In this project we focused on several aspects of technology development that advances the formation of an integrated biorefinery. These focus areas include: [1] establishment of pyrolysis processing systems and characterization of the product oils for fuel applications, including engine testing of a preferred product and its pro forma economic analysis; [2] extraction of sugars through a novel hotwater extaction process, and the development of levoglucosan (a pyrolysis BioOil intermediate); [3] identification and testing of the use of biochar, the coproduct from pyrolysis, for soil applications; [4] developments in methods of atomic layer epitaxy (for efficient development of coatings as in fuel cells); [5] advancement in fermentation of lignocellulosics, [6] development of algal biomass as a potential substrate for the biorefinery, and [7] development of catalysts from coproducts. These advancements are intended to provide a diverse set of product choices within the biorefinery, thus improving the cost effectiveness of the system. Technical effectiveness was demonstrated in the pyrolysis biooil based diesel fuel supplement, sugar extraction from lignocelluose, use of biochar, production of algal biomass in wastewaters, and the development of catalysts. Economic feasibility of algal biomass production systems seems attractive, relative to the other options. However, further optimization in all paths, and testing/demonstration at larger scales are required to fully understand the economic viabilities. The various coproducts provide a clear picture that multiple streams of value can be generated within an integrated biorefinery, and these include fuels and products.

K.C. Das; Thomas T. Adams; Mark A. Eiteman; John Stickney; Joy Doran Peterson; James R. Kastner; Sudhagar Mani; Ryan Adolphson

2012-06-12T23:59:59.000Z

28

NOTICE OF AVAILABILITY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The U.S. Department of Energy (DOE) has prepared a draft Environmental Assessment (EA) to analyze and describe the potential environmental impacts associated with the: Heterogeneous Feed Biorefinery Pontotoc, MS DOE/EA 1790 DOE's Golden Field Office has prepared a draft EA in accordance with the National Environmental Policy Act (NEPA). Enerkem Corporation is proposing to use Federal funding from DOE under the American Recovery and Reinvestment

29

A Biorefinery Goes 'Mod' and Small | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Biorefinery Goes 'Mod' and Small A Biorefinery Goes 'Mod' and Small A Biorefinery Goes 'Mod' and Small September 14, 2010 - 10:00am Addthis Minnesota-based Easy Energy Systems sells small-scale, easy-to use biorefineries. The company expects to create 100 jobs because of new orders. | Photo Courtesy of Easy Energy Systems | Minnesota-based Easy Energy Systems sells small-scale, easy-to use biorefineries. The company expects to create 100 jobs because of new orders. | Photo Courtesy of Easy Energy Systems | Lindsay Gsell What are the key facts? Minnesota-based company, Easy Energy Systems, sells small-scale, easy-to use biorefineries. Modular systems use feedstock scraps and wastepaper to fuel plant. Easy Energy Systems estimates creating an additional 100 jobs in the next year to fulfill orders.

30

Process Synthesis and Optimization of Biorefinery Configurations  

E-Print Network (OSTI)

The objective of this research was to develop novel and applicable methodologies to solve systematically problems along a roadmap of constructing a globally optimum biorefinery design. The roadmap consists of the following problems: (1) synthesis of conceptual biorefinery pathways from given feedstocks and products, (2) screening of the synthesized pathways to identify the most economic pathways, (3) development of a flexible biorefinery configuration, and (4) techno-economic analysis of a detailed biorefinery design. In the synthesis problem, a systems-based "forward-backward" approach was developed. It involves forward synthesis of biomass to possible intermediates and reverse synthesis starting with desired products and identifying necessary species and pathways leading to them. Then, two activities are performed to generate complete biorefinery pathways: matching (if one of the species synthesized in the forward step is also generated by the reverse step) or interception (a task is determined to take a forward-generated species with a reverse-generated species by identifying a known process or by using reaction pathway synthesis to link to two species.) In the screening problem, the Bellman's Principle of Optimality was applied to decompose the optimization problem into sub-problems in which an optimal policy of available technologies was determined for every conversion step. Subsequently, either a linear programming formulation or dynamic programming algorithm was used to determine the optimal pathways. In the configuration design problem, a new class of design problems with flexibility was proposed to build the most profitable plants that operate only when economic efficiency is favored. A new formulation approach with proposed constraints called disjunctive operation mode was also developed to solve the design problems. In the techno-economic analysis for a detailed design of biorefinery, the process producing hydrocarbon fuels from lignocellulose via the carboxylate platform was studied. This analysis employed many state-of-the-art chemical engineering fundamentals and used extensive sources of published data and advanced computing resources to yield reliable conclusions to the analysis. Case studies of alcohol-producing pathways from lignocellulosic biomass were discussed to demonstrate the merits of the proposed approaches in the former three problems. The process was extended to produce hydrocarbon fuels in the last problem.

Pham, Viet

2011-08-01T23:59:59.000Z

31

Integrated Biorefinery Research Facility: Advancing Biofuels Technology (Fact Sheet)  

DOE Green Energy (OSTI)

The Integrated Biorefinery Research Facility (IBRF) at the National Renewable Energy Laboratory (NREL) expands NREL's cellulosic ethanol research and development and collaboration capabilities.

Not Available

2009-03-01T23:59:59.000Z

32

Enerkem Tech | Open Energy Information  

Open Energy Info (EERE)

Partnership with NREL Yes Partnership Type MOU Partnering Center within NREL National Bioenergy Center Partnership Year 2004 LinkedIn Connections CrunchBase Profile No CrunchBase...

33

Preprocessing Moist Lignocellulosic Biomass for Biorefinery Feedstocks  

SciTech Connect

Biomass preprocessing is one of the primary operations in the feedstock assembly system of a lignocellulosic biorefinery. Preprocessing is generally accomplished using industrial grinders to format biomass materials into a suitable biorefinery feedstock for conversion to ethanol and other bioproducts. Many factors affect machine efficiency and the physical characteristics of preprocessed biomass. For example, moisture content of the biomass as received from the point of production has a significant impact on overall system efficiency and can significantly affect the characteristics (particle size distribution, flowability, storability, etc.) of the size-reduced biomass. Many different grinder configurations are available on the market, each with advantages under specific conditions. Ultimately, the capacity and/or efficiency of the grinding process can be enhanced by selecting the grinder configuration that optimizes grinder performance based on moisture content and screen size. This paper discusses the relationships of biomass moisture with respect to preprocessing system performance and product physical characteristics and compares data obtained on corn stover, switchgrass, and wheat straw as model feedstocks during Vermeer HG 200 grinder testing. During the tests, grinder screen configuration and biomass moisture content were varied and tested to provide a better understanding of their relative impact on machine performance and the resulting feedstock physical characteristics and uniformity relative to each crop tested.

Neal Yancey; Christopher T. Wright; Craig Conner; J. Richard Hess

2009-06-01T23:59:59.000Z

34

EA-1704: Construction and Operation of a Proposed Cellulosic Biorefinery,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

704: Construction and Operation of a Proposed Cellulosic 704: Construction and Operation of a Proposed Cellulosic Biorefinery, BlueFire Fulton Renewable Energy, LLC, Fulton, Mississippi EA-1704: Construction and Operation of a Proposed Cellulosic Biorefinery, BlueFire Fulton Renewable Energy, LLC, Fulton, Mississippi SUMMARY ThIs EA evaluates the potential environmental impacts of a propsal, (Fulton Project) that consists of the design, construction and operation of a biorefinery facility producing ethanol and other co-products from cellulosic materials utilizing a patented concentrated acid hydrolysis process. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD June 4, 2010 EA-1704: Finding of No Significant Impact Construction and Operation of a Proposed Cellulosic Biorefinery, BlueFire

35

DOE Announces $160 Million for Biorefinery Construction and Highlights New  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

$160 Million for Biorefinery Construction and $160 Million for Biorefinery Construction and Highlights New Agricultural Program to Promote Biofuels DOE Announces $160 Million for Biorefinery Construction and Highlights New Agricultural Program to Promote Biofuels February 22, 2006 - 12:11pm Addthis Funding Paves the Way for Diversifying America's Energy Mix DECATUR, IL - Energy Secretary Samuel W. Bodman, today announced $160 million in cost-shared funding over three years to construct up to three biorefineries in the United States. The Secretary made the announcement while visiting the Archer Daniels Midland Ethanol Plant, his second of four stops to promote the Advanced Energy Initiative announced by President Bush in his State of the Union address. Secretary Bodman also highlighted the United States Department of Agriculture's announcement today of almost $188

36

Preliminary Economics for the Production of Pyrolysis Oil from Lignin in a Cellulosic Ethanol Biorefinery  

Science Conference Proceedings (OSTI)

Cellulosic ethanol biorefinery economics can be potentially improved by converting by-product lignin into high valued products. Cellulosic biomass is composed mainly of cellulose, hemicellulose and lignin. In a cellulosic ethanol biorefinery, cellulose and hemicellullose are converted to ethanol via fermentation. The raw lignin portion is the partially dewatered stream that is separated from the product ethanol and contains lignin, unconverted feed and other by-products. It can be burned as fuel for the plant or can be diverted into higher-value products. One such higher-valued product is pyrolysis oil, a fuel that can be further upgraded into motor gasoline fuels. While pyrolysis of pure lignin is not a good source of pyrolysis liquids, raw lignin containing unconverted feed and by-products may have potential as a feedstock. This report considers only the production of the pyrolysis oil and does not estimate the cost of upgrading that oil into synthetic crude oil or finished gasoline and diesel. A techno-economic analysis for the production of pyrolysis oil from raw lignin was conducted. comparing two cellulosic ethanol fermentation based biorefineries. The base case is the NREL 2002 cellulosic ethanol design report case where 2000 MTPD of corn stover is fermented to ethanol (NREL 2002). In the base case, lignin is separated from the ethanol product, dewatered, and burned to produce steam and power. The alternate case considered in this report dries the lignin, and then uses fast pyrolysis to generate a bio-oil product. Steam and power are generated in this alternate case by burning some of the corn stover feed, rather than fermenting it. This reduces the annual ethanol production rate from 69 to 54 million gallons/year. Assuming a pyrolysis oil value similar to Btu-adjusted residual oil, the estimated ethanol selling price ranges from $1.40 to $1.48 (2007 $) depending upon the yield of pyrolysis oil. This is considerably above the target minimum ethanol selling price of $1.33 for the 2012 goal case process as reported in the 2007 State of Technology Model (NREL 2008). Hence, pyrolysis oil does not appear to be an economically attractive product in this scenario. Further research regarding fast pyrolysis of raw lignin from a cellulosic plant as an end product is not recommended. Other processes, such as high-pressure liquefaction or wet gasification, and higher value products, such as gasoline and diesel from fast pyrolysis oil should be considered in future studies.

Jones, Susanne B.; Zhu, Yunhua

2009-04-01T23:59:59.000Z

37

National Biorefineries Database | OpenEI  

Open Energy Info (EERE)

98 98 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142288198 Varnish cache server National Biorefineries Database Dataset Summary Description This phase of the project began with the development of a geodatabase with the focus predominantly on Ethanol. The task involved collection of data on ethanol production locations, transportation networks, production and storage capacities, transloading and blending locations and geographic marketing areas. The data were obtained by contacting the authorized person(s) in the ethanol plants. The plant contact information was gathered from the related websites, the exact physical location of the plant was verified, the production and storage capacity at the location, the mode of transportation used to ship ethanol to the marketer and the loading capacity were also obtained from the source. The contact information of the person had also been recorded for future reference. The information obtained had been updated to the geodatabase. Few organizations have been reluctant to share information due to proprietary issues.

38

NREL: Biomass Research - Projects in Integrated Biorefinery Processes  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects in Integrated Biorefinery Processes Projects in Integrated Biorefinery Processes A photo of a control room with four large computer screens. A man and a woman are looking at the screens. The Thermochemical Process Development Unit is equipped with sophisticated process monitoring and operation control systems. NREL is focused on integrating all the biomass conversion unit operations. With extensive knowledge of the individual unit operations, NREL is well-positioned to link these operations together at the mini-pilot and pilot scales. Among the integrated biorefinery projects are: Sorghum to Ethanol Research Initiative Sorghum shows promising characteristics as a feedstock for biofuel production. However, little basic research data exists. NREL is performing integrated research on sorghum by studying it at every step along the

39

Partnering with Industry to Advance Biofuels, NREL's Integrated Biorefinery Research Facility (Fact Sheet)  

Science Conference Proceedings (OSTI)

Fact sheet describing NREL's Integrated Biorefinery Research Facility and its availability to biofuels' industry partners who want to operate, test, and develop biorefining technology and equipment.

Not Available

2010-10-01T23:59:59.000Z

40

DOE Announces up to $200 Million in Funding for Biorefineries | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

up to $200 Million in Funding for Biorefineries up to $200 Million in Funding for Biorefineries DOE Announces up to $200 Million in Funding for Biorefineries May 1, 2007 - 12:45pm Addthis Small- and full-scale projects total up to $585 million to advance President Bush's Twenty in Ten Initiative WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced that DOE will provide up to $200 million, over five years (FY'07-'11) to support the development of small-scale cellulosic biorefineries in the United States. This Funding Opportunity Announcement (FOA) seeks projects to develop biorefineries at ten percent of commercial scale that produce liquid transportation fuels such as ethanol, as well as bio-based chemicals and bioproducts used in industrial applications. This

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing the Clean  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing the Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing the Clean Energy Game Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing the Clean Energy Game February 9, 2011 - 1:40pm Addthis Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing the Clean Energy Game Paul Bryan Biomass Program Manager, Office of Energy Efficiency & Renewable Energy How does it work? Vegetative and agricultural waste reacts with oxygen to produce synthesis gas, which consists of hydrogen and carbon monoxide. The gas is cooled, cleaned, and fed to naturally occurring bacteria. The bacteria convert the gas into cellulosic ethanol, which is then purified to be used as a transportation fuel. Blueprints of the INEOS Biorefinery | Courtesy of INEOS Today marks the groundbreaking of INEOS Bio's Indian River Bioenergy

42

Conceptual design assessment for the co-firing of bio-refinery supplied lignin project. Quarterly report, June 23--July 1, 2000  

DOE Green Energy (OSTI)

The Conceptual Design Assessment for the Co-Firing of Bio-Refinery Supplied Lignin Project was successfully kicked off on July 23, 2000 during a meeting at the TVA-PPI facility in Muscle Shoals, AL. An initial timeline for the study was distributed, issues of concern were identified and a priority actions list was developed. Next steps include meeting with NETL to discuss de-watering and lignin fuel testing, the development of the mass balance model and ethanol facility design criteria, providing TVA-Colbert with preliminary lignin fuel analysis and the procurement of representative feed materials for the pilot and bench scale testing of the hydrolysis process.

Berglund, T.; Ranney, J.T.; Babb, C.L.

2000-07-27T23:59:59.000Z

43

Synergistic Hydrogen Production in a Biorefinery via Bioelectrochemical Systems  

Science Conference Proceedings (OSTI)

Microbial electrolysis cells are devices that use biocatalysis and electrolysis for production of hydrogen from organic matter. Biorefinery process streams contain fermentation by products and inhibitors which accumulate in the process stream if the water is recycled. These molecules also affect biomass to biofuel yields if not removed from the recycle water. The presence of sugar- and lignin- degradation products such as furfural, vanillic acid and 4-hydroxybenzaldehyde has been shown to reduce fermentation yields. In this work, we calculate the potential for hydrogen production using microbial electrolysis cells from these molecules as substrates. Conversion of these substrates to electricity is demonstrated in microbial fuel cells and will also be presented.

Borole, A. P.; Hamilton, C. Y.; Schell, D. J.

2012-01-01T23:59:59.000Z

44

3.1.1.2 Feed Processing and Handling DL2 Final Report  

DOE Green Energy (OSTI)

This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.

Elliott, Douglas C.; Magnuson, Jon K.; Wend, Christopher F.

2006-09-30T23:59:59.000Z

45

Follow-up Audit of the Department of Energy's Financial Assistance for Integrated Biorefinery Projects  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department Department of Energy's Financial Assistance for Integrated Biorefinery Projects DOE/IG-0893 September 2013 U.S. Department of Energy Office of Inspector General Office of Audits and Inspections Department of Energy Washington, DC 20585 September 9, 2013 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: Audit Report on "Follow-up Audit of the Department of Energy's Financial Assistance for Integrated Biorefinery Projects" BACKGROUND The Department of Energy's Bioenergy Technologies Office (Program) supports the development of biomass resources into commercially viable biofuels, bioproducts and biopower. The Program provides financial assistance for integrated biorefinery projects to assist in building

46

DOE Selects 3 Small-Scale Biorefinery Projects for up to $86 Million of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Small-Scale Biorefinery Projects for up to $86 3 Small-Scale Biorefinery Projects for up to $86 Million of Federal Funding in Maine, Tennessee and Kentucky DOE Selects 3 Small-Scale Biorefinery Projects for up to $86 Million of Federal Funding in Maine, Tennessee and Kentucky April 18, 2008 - 10:49am Addthis Projects Demonstrate Continued Commitment to Advancing Development of Sustainable, Cost-Competitive Cellulosic Ethanol ALEXANDRIA, VA. - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced the competitive selection of three projects in which DOE plans to invest up to $86 million over four years (FY '08 - '11) to support the development of small-scale cellulosic biorefineries in Old Town, ME; Vonore, TN; and Washington County, KY. This funding will further President Bush's goal of making cellulosic ethanol cost-competitive by

47

U.S. Department of Energy Selects First Round of Small-Scale Biorefinery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Selects First Round of Small-Scale U.S. Department of Energy Selects First Round of Small-Scale Biorefinery Projects for Up to $114 Million in Federal Funding U.S. Department of Energy Selects First Round of Small-Scale Biorefinery Projects for Up to $114 Million in Federal Funding January 29, 2008 - 10:53am Addthis Ten percent commercial-scale biorefineries will help the nation meet new Renewable Fuels Standard WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced that DOE will invest up to $114 million, over four years, (Fiscal Years 2007-2010) for four small-scale biorefinery projects to be located in Commerce City, Colorado; St. Joseph, Missouri; Boardman, Oregon; and Wisconsin Rapids, Wisconsin. Building on President Bush's goal of making cellulosic ethanol cost-competitive by 2012, these ten-percent of

48

U.S. Department of Energy Selects First Round of Small-Scale Biorefinery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

First Round of Small-Scale First Round of Small-Scale Biorefinery Projects for Up to $114 Million in Federal Funding U.S. Department of Energy Selects First Round of Small-Scale Biorefinery Projects for Up to $114 Million in Federal Funding January 29, 2008 - 10:53am Addthis Ten percent commercial-scale biorefineries will help the nation meet new Renewable Fuels Standard WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced that DOE will invest up to $114 million, over four years, (Fiscal Years 2007-2010) for four small-scale biorefinery projects to be located in Commerce City, Colorado; St. Joseph, Missouri; Boardman, Oregon; and Wisconsin Rapids, Wisconsin. Building on President Bush's goal of making cellulosic ethanol cost-competitive by 2012, these ten-percent of

49

Improving Energy Efficiency and Enabling Water Recycle in Biorefineries Using Bioelectrochemical Cells.  

SciTech Connect

Improving biofuel yield and water reuse are two important issues in further development of biorefineries. The total energy content of liquid fuels (including ethanol and hydrocarbon) produced from cellulosic biomass via biochemical or hybrid bio-thermochemical routes can vary from 49% to 70% of the biomass entering the biorefinery, on an energy basis. Use of boiler for combustion of residual organics and lignin results in significant energy and water losses. An alternate process to improve energy recovery from the residual organic streams is via use of bioelectrochemical systems such as microbial fuel cells (MFCs) microbial electrolysis cells (MECs). The potential advantages of this alternative scheme in a biorefinery include minimization of heat loss and generation of a higher value product, hydrogen. The need for 5-15 gallons of water per gallon of ethanol can be reduced significantly via recycle of water after MEC treatment. Removal of inhibitory byproducts such as furans, phenolics and acetate in MFC/MECs to generate energy, thus, has dual advantages including improvements in energy efficiency and ability to recycle water. Conversion of the sugar- and lignin- degradation products to hydrogen is synergistic with biorefinery hydrogen requirements for upgrading F-T liquids and other byproducts to high-octane fuels and/or high value products. Some of these products include sorbitol, succinic acid, furan and levulinate derivatives, glycols, polyols, 1,4-butenadiol, phenolics polymers, etc. Potential process alternatives utilizing MECs in biorefineries capable of improving energy efficiency by up to 30% are discussed.

Borole, Abhijeet P [ORNL

2010-01-01T23:59:59.000Z

50

Estimating Hydrogen Production Potential in Biorefineries Using Microbial Electrolysis Cell Technology  

Science Conference Proceedings (OSTI)

Microbial electrolysis cells (MECs) are devices that use a hybrid biocatalysis-electrolysis process for production of hydrogen from organic matter. Future biofuel and bioproducts industries are expected to generate significant volumes of waste streams containing easily degradable organic matter. The emerging MEC technology has potential to derive added- value from these waste streams via production of hydrogen. Biorefinery process streams, particularly the stillage or distillation bottoms contain underutilized sugars as well as fermentation and pretreatment byproducts. In a lignocellulosic biorefinery designed for producing 70 million gallons of ethanol per year, up to 7200 m3/hr of hydrogen can be generated. The hydrogen can either be used as an energy source or a chemical reagent for upgrading and other reactions. The energy content of the hydrogen generated is sufficient to meet 57% of the distillation energy needs. We also report on the potential for hydrogen production in existing corn mills and sugar-based biorefineries. Removal of the organics from stillage has potential to facilitate water recycle. Pretreatment and fermentation byproducts generated in lignocellulosic biorefinery processes can accumulate to highly inhibitory levels in the process streams, if water is recycled. The byproducts of concern including sugar- and lignin- degradation products such as furans and phenolics can also be converted to hydrogen in MECs. We evaluate hydrogen production from various inhibitory byproducts generated during pretreatment of various types of biomass. Finally, the research needs for development of the MEC technology and aspects particularly relevant to the biorefineries are discussed.

Borole, Abhijeet P [ORNL; Mielenz, Jonathan R [ORNL

2011-01-01T23:59:59.000Z

51

MBI Biorefinery: Corn to Biomass, Ethanol to Biochemicals and Biomaterials  

DOE Green Energy (OSTI)

The project is a continuation of DOE-funded work (FY02 and FY03) that has focused on the development of the ammonia fiber explosion (AFEX) pretreatment technology, fermentation production of succinic acid and new processes and products to enhance dry mill profitability. The primary objective for work beginning in April 2004 and ending in November 2005 is focus on the key issues related to the: (1) design, costing and construction plan for a pilot AFEX pretreatment system, formation of a stakeholder development team to assist in the planning and design of a biorefinery pilot plant, continued evaluation of corn fractionation technologies, corn oil extraction, AFEX treatment of corn fiber/DDGs; (2) development of a process to fractionate AFEX-treated corn fiber and corn stover--cellulose and hemicellulose fractionation and sugar recovery; and (3) development of a scalable batch succinic acid production process at 500 L at or below $.42/lb, a laboratory scale fed-batch process for succinic acid production at or below $.40/lb, a recovery process for succinic acid that reduces the cost of succinic acid by $.02/lb and the development of an acid tolerant succinic acid production strain at lab scale (last objective not to be completed during this project time period).

None

2006-02-17T23:59:59.000Z

52

DOE to Provide up to $40 Million in Funding for Small-Scale Biorefinery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

up to $40 Million in Funding for Small-Scale up to $40 Million in Funding for Small-Scale Biorefinery Projects in Wisconsin and Louisiana DOE to Provide up to $40 Million in Funding for Small-Scale Biorefinery Projects in Wisconsin and Louisiana July 14, 2008 - 2:15pm Addthis Projects Show Continued Investment in Non-Food Based, Sustainable, and Cost Competitive Second-Generation Cellulosic Biofuels WASHINGTON - The U.S. Department of Energy (DOE) today announced the selection of two small-scale cellulosic biorefinery projects in Park Falls, Wis. and Jennings, La. for federal funding of up to $40 million over five years. These projects will further President Bush's goal of making cellulosic ethanol cost-competitive with corn-based ethanol by 2012, and help reduce America's gasoline use by expanding the availability of

53

Biomass Biorefinery for the production of Polymers and Fuels  

DOE Green Energy (OSTI)

The conversion of biomass crops to fuel is receiving considerable attention as a means to reduce our dependence on foreign oil imports and to meet future energy needs. Besides their use for fuel, biomass crops are an attractive vehicle for producing value added products such as biopolymers. Metabolix, Inc. of Cambridge proposes to develop methods for producing biodegradable polymers polyhydroxyalkanoates (PHAs) in green tissue plants as well as utilizating residual plant biomass after polymer extraction for fuel generation to offset the energy required for polymer extraction. The primary plant target is switchgrass, and backup targets are alfalfa and tobacco. The combined polymer and fuel production from the transgenic biomass crops establishes a biorefinery that has the potential to reduce the nations dependence on foreign oil imports for both the feedstocks and energy needed for plastic production. Concerns about the widespread use of transgenic crops and the growers ability to prevent the contamination of the surrounding environment with foreign genes will be addressed by incorporating and expanding on some of the latest plant biotechnology developed by the project partners of this proposal. This proposal also addresses extraction of PHAs from biomass, modification of PHAs so that they have suitable properties for large volume polymer applications, processing of the PHAs using conversion processes now practiced at large scale (e.g., to film, fiber, and molded parts), conversion of PHA polymers to chemical building blocks, and demonstration of the usefulness of PHAs in large volume applications. The biodegradability of PHAs can also help to reduce solid waste in our landfills. If successful, this program will reduce U.S. dependence on imported oil, as well as contribute jobs and revenue to the agricultural economy and reduce the overall emissions of carbon to the atmosphere.

Dr. Oliver P. Peoples

2008-05-05T23:59:59.000Z

54

Development of efficient, integrated cellulosic biorefineries : LDRD final report.  

DOE Green Energy (OSTI)

Cellulosic ethanol, generated from lignocellulosic biomass sources such as grasses and trees, is a promising alternative to conventional starch- and sugar-based ethanol production in terms of potential production quantities, CO{sub 2} impact, and economic competitiveness. In addition, cellulosic ethanol can be generated (at least in principle) without competing with food production. However, approximately 1/3 of the lignocellulosic biomass material (including all of the lignin) cannot be converted to ethanol through biochemical means and must be extracted at some point in the biochemical process. In this project we gathered basic information on the prospects for utilizing this lignin residue material in thermochemical conversion processes to improve the overall energy efficiency or liquid fuel production capacity of cellulosic biorefineries. Two existing pretreatment approaches, soaking in aqueous ammonia (SAA) and the Arkenol (strong sulfuric acid) process, were implemented at Sandia and used to generated suitable quantities of residue material from corn stover and eucalyptus feedstocks for subsequent thermochemical research. A third, novel technique, using ionic liquids (IL) was investigated by Sandia researchers at the Joint Bioenergy Institute (JBEI), but was not successful in isolating sufficient lignin residue. Additional residue material for thermochemical research was supplied from the dilute-acid simultaneous saccharification/fermentation (SSF) pilot-scale process at the National Renewable Energy Laboratory (NREL). The high-temperature volatiles yields of the different residues were measured, as were the char combustion reactivities. The residue chars showed slightly lower reactivity than raw biomass char, except for the SSF residue, which had substantially lower reactivity. Exergy analysis was applied to the NREL standard process design model for thermochemical ethanol production and from a prototypical dedicated biochemical process, with process data supplied by a recent report from the National Research Council (NRC). The thermochemical system analysis revealed that most of the system inefficiency is associated with the gasification process and subsequent tar reforming step. For the biochemical process, the steam generation from residue combustion, providing the requisite heating for the conventional pretreatment and alcohol distillation processes, was shown to dominate the exergy loss. An overall energy balance with different potential distillation energy requirements shows that as much as 30% of the biomass energy content may be available in the future as a feedstock for thermochemical production of liquid fuels.

Teh, Kwee-Yan; Hecht, Ethan S.; Shaddix, Christopher R.; Buffleben, George M.; Dibble, Dean C.; Lutz, Andrew E.

2010-09-01T23:59:59.000Z

55

EA-1865: Department of Energy Loan Guarantee to Kior, Inc., for Biorefinery Facilities in Georgia, Mississippi, and Texas  

Energy.gov (U.S. Department of Energy (DOE))

This EA will evaluate the environmental impacts of a proposal to issue a Federal loan guarantee to Kior, Inc., for biorefinery facilities in Georgia, Mississippi, and Texas. This EA is on hold.

56

Optimization of Supply Chain Management and Facility Location Selection for a Biorefinery  

E-Print Network (OSTI)

If renewable energy and biofuels are to attain success in the market place, each step of their production and the system as a whole must be optimized to increase material and energy efficiency, reduce production cost and create a competitive alternative to fossil fuels. Systems optimization techniques may be applied to product selection, process design and integration, feedstock procurement and supply chain management to improve performance. This work addresses two problems facing a biorefinery: technology selection and feedstock scheduling in the face of varying feedstock supply and cost. Also addressed is the optimization of a biorefinery supply chain with respect to distributed processing of biomass to bio-products via preprocessing hubs versus centralized processing and facility location selection. Two formulations are proposed that present a systematic approach to address each problem. Case studies are included to demonstrate model capabilities for both formulations. The scheduling model results display model sensitivity to feedstock price and transport distance penalized through carbon dioxide emissions. The distributed model shows that hubs may be used to extend the operating radius of a biorefinery and thereby increase profits.

Bowling, Ian Michael

2010-12-01T23:59:59.000Z

57

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

91 - 2800 of 31,917 results. 91 - 2800 of 31,917 results. Download EA-1790: Final Environmental Assessment Construction and Operation of a Heterogeneous Feed Biorefinery Enerkem Corporation Pontotoc, Mississippi http://energy.gov/nepa/downloads/ea-1790-final-environmental-assessment Download Draft 2014 Annual Plan Section 999: Draft 2014 Annual Plan http://energy.gov/fe/downloads/draft-2014-annual-plan Download 2010 Smart Grid Peer Review Day Two Morning Presentations The U.S. Department of Energy's Smart Grid Program conducted the 2010 Peer Review November 2 - 4, 2010 in Golden, CO. The forum provides an opportunity to learn about the latest innovations and... http://energy.gov/oe/downloads/2010-smart-grid-peer-review-day-two-morning-presentations Download DOE-TSL-2-2002 Directory of Points of Contact for the DOE Technical Standards Program

58

Findings of No Significant Impact (FONSI) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 5, 2010 October 5, 2010 EA-1827: Finding of No Significant Impact Suniva Inc's Artisun Project in Thomas Township, Saginaw, Michigan October 1, 2010 EA-1784: Finding of No Significant Impact Fotowatio Nevada Solar, LLC's APEX Solar Power Project in Clark County, Nevada September 30, 2010 EA-1790: Finding of No Significant Impact Construction and Operation of a Heterogeneous Feed Biorefinery, Enerkem Corporation, Pontotoc, Mississippi September 30, 2010 EA-1832: Finding of No Significant Impact Rainer Biogas LLC Community Anaerobic Manure Digester, Enumclaw, King County, Washington September 30, 2010 EA-1762: Finding of No Significant Impact Wellford Landfill Methane and Greenhouse Gas to Energy Project, Spartanburg County, South Carolina September 23, 2010 EA-1761: Finding of No Significant Impact and Floodplain Statement of

59

Downloads Feed  

NLE Websites -- All DOE Office Websites (Extended Search)

5:57:00 -0600 Wed, 08 Jan 2014 5:57:00 -0600 Wed, 08 Jan 2014 15:59:46 -0600 HIPAA Authorization for Release of Information (ANL-1008) http://www.anl.gov/downloads/hipaa-authorization-release-information-anl-1008 Request for release of health-related information to Argonne for resolution of a healthcare plan claim January 8, 2014 Downloads Feed Key Facts about Argonne National Laboratory http://www.anl.gov/downloads/key-facts-about-argonne-national-laboratory December 16, 2013 Downloads Feed FY14 Argonne Site Sustainability Plan http://www.anl.gov/downloads/fy14-argonne-site-sustainability-plan December 6, 2013 Downloads Feed Blue Cross Blue Shield of Illinois PPO Claim Form http://www.anl.gov/downloads/blue-cross-blue-shield-illinois-ppo-claim-form November 25, 2013 Downloads Feed Key Facts about the Computing, Environment

60

The Impact of Biomass Feedstock Supply Variability on the Delivered Price to a Biorefinery in the Peace River Region of Alberta, Canada  

SciTech Connect

Agricultural residue feedstock availability in a given region can vary significantly over the 20 25 year lifetime of a biorefinery. Since delivered price of biomass feedstock to a biorefinery is related to the distance travelled and equipment optimization, and transportation distance increases as productivity decreases, productivity is a primary determinant of feedstock price. Using the Integrated Biomass Supply Analysis and Logistics (IBSAL) modeling environment and a standard round bale harvest and delivery scenario, harvest and delivery price were modelled for minimum, average, and maximum yields at four potential biorefinery sites in the Peace River region of Alberta, Canada. Biorefinery capacities ranged from 50,000 to 500,000 tonnes per year. Delivery cost is a linear function of transportation distance and can be combined with a polynomial harvest function to create a generalized delivered cost function for agricultural residues. The range in delivered cost is substantial and is an important consideration for the operating costs of a biorefinery.

Stephen, Jamie [University of British Columbia, Vancouver; Sokhansanj, Shahabaddine [ORNL; Bi, X.T. [University of British Columbia, Vancouver; Sowlati, T. [University of British Columbia, Vancouver; Kloeck, T. [Alberta Agriculture; Townley-Smith, Lawrence [AAFC; Stumborg, Mark [AAFC

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Biorefinery Concept Development Based On Wheat Flour Milling  

DOE Green Energy (OSTI)

A new process is being developed to extract starch from millfeed, the low-value byproduct of wheat flour milling, and convert it to glucose through enzymatic processing. The millfeed-derived glucose will then be converted to value-added products, such as polyol, through a catalytic process, or lactic acid, through a fermentation process. The starch (glucose) recovery process has been tested through the pilot scale. Catalytic and fermentation processes have been tested in the laboratory. The process developed for glucose recovery from wheat millfeed includes hot water extraction of starch and filtration of a fibrous animal feed coproduct, followed by enzymatic liquefaction and saccharification of the extracted starch, with filtration of a high-protein coproduct. The bench-scale tests showed that a glucose yield of approximately 30% on a dry millfeed basis could be achieved, which corresponds to the recovery of essentially all the glucose value in the millfeed. Glucose yields with the pilot-scale system were comparable, although filtration was more difficult.

Elliott, Douglas C.; Orth, Rick J.; Gao, Johnway; Werpy, Todd A.; Eakin, David E.; Schmidt, Andrew J.; Neuenschwander, Gary G.

2002-04-07T23:59:59.000Z

62

Controlling Accumulation of Fermentation Inhibitors in Biorefinery Recycle Water Using Microbial Fuel Cells  

SciTech Connect

Background Microbial fuel cells (MFC) and microbial electrolysis cells are electrical devices that treat water using microorganisms and convert soluble organic matter into electricity and hydrogen, respectively. Emerging cellulosic biorefineries are expected to use large amounts of water during production of ethanol. Pretreatment of cellulosic biomass results in production of fermentation inhibitors which accumulate in process water and make the water recycle process difficult. Use of MFCs to remove the inhibitory sugar and lignin degradation products from recycle water is investigated in this study. Results Use of an MFC to reduce the levels of furfural, 5-hydroxymethylfurfural, vanillic acid, 4- hydroxybenzaldehyde and 4-hydroxyacetophenone while simultaneously producing electricity is demonstrated here. An integrated MFC design approach was used which resulted in high power densities for the MFC, reaching up to 3700mW/m2 (356W/m3 net anode volume) and a coulombic efficiency of 69%. The exoelectrogenic microbial consortium enriched in the anode was characterized using a 16S rRNA clone library method. A unique exoelectrogenic microbial consortium dominated by -Proteobacteria (50%), along with -Proteobacteria (28%), -Proteobacteria (14%), -Proteobacteria (6%) and others was identified. The consortium demonstrated broad substrate specificity, ability to handle high inhibitor concentrations (5 to 20mM) with near complete removal, while maintaining long-term stability with respect to power production. Conclusions Use of MFCs for removing fermentation inhibitors has implications for: 1) enabling higher ethanol yields at high biomass loading in cellulosic ethanol biorefineries, 2) improved water recycle and 3) electricity production up to 25% of total biorefinery power needs.

Borole, Abhijeet P [ORNL; Mielenz, Jonathan R [ORNL; Leak, David [Imperial College, London; Vishnivetskaya, Tatiana A [ORNL; Hamilton, Choo Yieng [ORNL; Andras, Calin [Imperial College, London

2009-01-01T23:59:59.000Z

63

Catalytic Hydrothermal Gasification of Lignin-Rich Biorefinery Residues and Algae Final Report  

DOE Green Energy (OSTI)

This report describes the results of the work performed by PNNL using feedstock materials provided by the National Renewable Energy Laboratory, KL Energy and Lignol lignocellulosic ethanol pilot plants. Test results with algae feedstocks provided by Genifuel, which provided in-kind cost share to the project, are also included. The work conducted during this project involved developing and demonstrating on the bench-scale process technology at PNNL for catalytic hydrothermal gasification of lignin-rich biorefinery residues and algae. A technoeconomic assessment evaluated the use of the technology for energy recovery in a lignocellulosic ethanol plant.

Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.; Rotness, Leslie J.; Zacher, Alan H.; Santosa, Daniel M.; Valkenburg, Corinne; Jones, Susanne B.; Tjokro Rahardjo, Sandra A.

2009-11-03T23:59:59.000Z

64

IEA Bioenergy Task 42 on Biorefineries: Co-production of fuels, chemicals, power and materials from biomass  

E-Print Network (OSTI)

from biomass IEA Bioenergy Task 42 ­ Countries Report Final Francesco Cherubini, Gerfried Jungmeier and Materials from Biomass (www.biorefinery.nl/ieabioenergy-task42). IEA Bioenergy is a collaborative network a new and very broad biomass-related field, with a very large application potential, and deals

65

Integration of Biorefineries and Nuclear Cogeneration Power Plants - A Preliminary Analysis  

SciTech Connect

Biomass-based ethanol and nuclear power are two viable elements in the path to U.S. energy independence. Numerous studies suggest nuclear power could provide a practical carbon-free heat source alternative for the production of biomass-based ethanol. In order for this coupling to occur, it is necessary to examine the interfacial requirements of both nuclear power plants and bioethanol refineries. This report describes the proposed characteristics of a small cogeneration nuclear power plant, a biochemical process-based cellulosic bioethanol refinery, and a thermochemical process-based cellulosic biorefinery. Systemic and interfacial issues relating to the co-location of either type of bioethanol facility with a nuclear power plant are presented and discussed. Results indicate future co-location efforts will require a new optimized energy strategy focused on overcoming the interfacial challenges identified in the report.

Greene, Sherrell R [ORNL; Flanagan, George F [ORNL; Borole, Abhijeet P [ORNL

2009-03-01T23:59:59.000Z

66

Partnering with Industry to Advance Biofuels and Bioproducts (Fact Sheet), Integrated Biorefinery Research Facility (IBRF)  

NLE Websites -- All DOE Office Websites (Extended Search)

operated by the Alliance for Sustainable Energy, LLC. Partnering with Industry to Advance Biofuels and Bioproducts Integrated Biorefinery Research Facility The IBRF can handle high concentrations of solids in the pretreatment and enzymatic hydrolysis steps, a key factor in reducing costs. Bioreactors from 10 L to 9000 L and separation and concentration equipment are housed in the IBRF allowing for biomass conversion processes to be fully integrated. Access to Experts While using the IBRF, industry partners have access to NREL's world-renowned experts, process equipment, and systems that can be used to develop and evaluate commercial processes for the production of biobased products and fuels. In addition, partners have access to NREL's state-of-the-art molecular

67

Integrated Biorefinery Project: Cooperative Research and Development Final Report, CRADA Number CRD-10-390  

Science Conference Proceedings (OSTI)

The Amyris-NREL CRADA is a sub-project of Amyris?s DOE-funded pilot-scale Integrated Biorefinery (IBR). The primary product of the Amyris IBR is Amyris Renewable Diesel. Secondary products will include lubricants, polymers and other petro-chemical substitutes. Amyris and its project partners will execute on a rapid project to integrate and leverage their collective expertise to enable the conversion of high-impact biomass feedstocks to these advanced, infrastructure-compatible products. The scope of the Amyris-NREL CRADA includes the laboratory development and pilot scale-up of bagasse pretreatment and enzymatic saccharification conditions by NREL for subsequent conversion of lignocellulosic sugar streams to Amyris Diesel and chemical products by Amyris. The CRADA scope also includes a techno-economic analysis of the overall production process of Amyris products from high-impact biomass feedstocks.

Chapeaux, A.; Schell, D.

2013-06-01T23:59:59.000Z

68

Conversion of residual organics in corn stover-derived biorefinery stream to bioenergy via microbial fuel cell  

SciTech Connect

A biorefinery process typically uses about 4-10 times as much water as the amount of biofuel generated. The wastewater produced in a biorefinery process contains residual sugars, 5-furfural, phenolics, and other pretreatment and fermentation byproducts. Treatment of the wastewater can reduce the need for fresh water and potentially add to the environmental benefits of the process. Use of microbial fuel cells (MFCs) for conversion of the various organics present in a post-fermentation biorefinery stream is reported here. The organic loading was varied over a wide range to assess removal efficiency, coulombic efficiency and power production. A coulombic efficiency of 40% was observed for a low loading of 1% (0.66 g/L) and decreased to 1.8% for the undiluted process stream (66.4 g/L organic loading). A maximum power density of 1180 mW/m2 was observed at a loading of 8%. Excessive loading was found to result in poor electrogenic performance. The results indicate that operation of an MFC at an intermediate loading using dilution and recirculation of the process stream can enable effective treatment with bioenergy recovery.

Borole, Abhijeet P [ORNL; Hamilton, Choo Yieng [ORNL; Schell, Daniel J [National Renewable Energy Laboratory (NREL)

2012-01-01T23:59:59.000Z

69

Evaluation of Basic Parameters for Packaging, Storage and Transportation of Biomass Material from Field to Biorefinery  

E-Print Network (OSTI)

The universal adoption of biomass materials as an alternate fuel source to fossil fuels for transportation and electricity has been hindered by the high transportation costs involved in fuel production. Optimization of these initial costs will make the eco-friendly fuels more economically viable. Biomass is a promising feedstock for biofuels primarily because it is a renewable and sustainable resource. Among the most studied grassland crops, switchgrass is a perennial warm-season grass and has been identified as a potential energy crop. This research focuses on evaluating various physical parameters which affect the economic feasibility of packaging and transporting switchgrass from the field to the biorefinery. The switchgrass was harvested using a mower conditioner followed by field chopping after varying drying periods. The first harvesting period spanned from early November to mid December 2007 and the second was August to October 2008. Densification properties of chopped switchgrass were studied under compression. The effects of compressive stresses (41 to 101 kPa), number of strokes (1 to 10), moisture content (9 to 62 percent) and chopping length (63 and 95 mm) on the densification of chopped switchgrass were studied. The final dry matter density (DMD) increased with the compressive stresses and the number of strokes, small chop length and low moisture content. The maximum free-standing DMD obtained was 245 kg/m^3.

Paliwal, Richa

2010-12-01T23:59:59.000Z

70

Conceptual Design of Biorefineries Through the Synthesis of Optimal Chemical-reaction Pathways  

E-Print Network (OSTI)

Decreasing fossil fuel reserves and environmental concerns necessitate a shift toward biofuels. However, the chemistry of many biomass to fuel conversion pathways remains to be thoroughly studied. The future of biorefineries thus depends on developing new pathways while optimizing existing ones. Here, potential chemicals are added to create a superstructure, then an algorithm is run to enumerate every feasible reaction stoichiometry through a mixed integer linear program (MILP). An optimal chemical reaction pathway, taking into account thermodynamic, safety, and economic constraints is then found through reaction network flux analysis (RNFA). The RNFA is first formulated as a linear programming problem (LP) and later recast as an MILP in order to solve multiple alternate optima through integer cuts. A graphical method is also developed in order to show a shortcut method based on thermodynamics as opposed to the reaction stoichiometry enumeration and RNFA methods. A hypothetical case study, based on the conversion of woody biomass to liquid fuels, is presented at the end of the work along with a more detailed look at the glucose and xylose to 2-mthyltetrahydrofuran (MTHF) biofuel production pathway.

Pennaz, Eric James

2011-08-01T23:59:59.000Z

71

Final Technical Report: Improvement of Zymomonas mobilis for Commercial Use in Corn-based Biorefineries  

DOE Green Energy (OSTI)

Between 2007 and 2010 DuPont conducted a program under DOE award DE-FC36-07GO17056 to develop and improve Zymomonas mobilis as an ethanologen for commercial use in biorefineries to produce cellulosic ethanol. This program followed upon an earlier DOE funded program in which DuPont, in collaboration with the National Renewable Energy Laboratory (NREL) had developed a Zymomonas strain in conjunction with the development of an integrated cellulosic ethanol process. In the current project, we sought to maximize the utility of Zymomonas by adding the pathway to allow fermentation of the minor sugar arabinose, improve the utilization of xylose, improve tolerance to process hydrolysate and reduce the cost of producing the ethanologen. We undertook four major work streams to address these tasks, employing a range of approaches including genetic engineering, adaptation, metabolite and pathway analysis and fermentation process development. Through this project, we have developed a series of strains with improved characteristics versus the starting strain, and demonstrated robust scalability to at least the 200L scale. By a combination of improved ethanol fermentation yield and titer as well as reduced seed train costs, we have been able to reduce the capital investment and minimum ethanol selling price (MESP) by approximately 8.5% and 11% respectively vs. our starting point. Furthermore, the new strains we have developed, coupled with the learnings of this program, provide a platform for further strain improvements and advancement of cellulosic ethanol technology.

Hitz, William D.

2010-12-07T23:59:59.000Z

72

Succinic Acid as a Byproduct in a Corn-based Ethanol Biorefinery  

Science Conference Proceedings (OSTI)

MBI endeavored to develop a process for succinic acid production suitable for integration into a corn-based ethanol biorefinery. The project investigated the fermentative production of succinic acid using byproducts of corn mill operations. The fermentation process was attuned to include raw starch, endosperm, as the sugar source. A clean-not-sterile process was established to treat the endosperm and release the monomeric sugars. We developed the fermentation process to utilize a byproduct of corn ethanol fermentations, thin stillage, as the source of complex nitrogen and vitamin components needed to support succinic acid production in A. succinogenes. Further supplementations were eliminated without lowering titers and yields and a productivity above 0.6 g l-1 hr-1was achieved. Strain development was accomplished through generation of a recombinant strain that increased yields of succinic acid production. Isolation of additional strains with improved features was also pursued and frozen stocks were prepared from enriched, characterized cultures. Two recovery processes were evaluated at pilot scale and data obtained was incorporated into our economic analyses.

MBI International

2007-12-31T23:59:59.000Z

73

Top Value-Added Chemicals from Biomass - Volume IIResults of Screening for Potential Candidates from Biorefinery Lignin  

SciTech Connect

This report evaluates lignins role as a renewable raw material resource. Opportunities that arise from utilizing lignin fit into one of three categories: 1)power, fuel and syngas (generally near-term opportunities) 2) macromolecules (generally medium-term opportunities) 3) aromatics and miscellaneous monomers (long-term opportunities). Biorefineries will receive and process massive amounts of lignin. For this reason, how lignin can be best used to support the economic health of the biorefinery must be defined. An approach that only considers process heat would be shortsighted. Higher value products present economic opportunities and the potential to significantly increase the amount of liquid transportation fuel available from biomass. In this analysis a list of potential uses of lignin was compiled and sorted into product types which are broad classifications (listed above as powerfuelsyngas; macromolecules; and aromatics). In the first product type (powerfuelgasification) lignin is used purely as a carbon source and aggressive means are employed to break down its polymeric structure. In the second product type (macromolecules) the opposite extreme is considered and advantage of the macromolecular structure imparted by nature is retained in high-molecular weight applications. The third product type (aromatics) lies somewhere between the two extremes and employs technologies that would break up lignins macromolecular structure but maintain the aromatic nature of the building block molecules. The individual opportunities were evaluated based on their technical difficulty, market, market risk, building block utility, and whether a pure material or a mixture would be produced. Unlike the Sugars Top 10 report it was difficult to identify the ten best opportunities, however, the potential opportunities fell nicely into near-, medium- and long-term opportunities. Furthermore, the near-, medium- and long-term opportunities roughly align with the three product types. From this analysis a list of technical barriers was developed which can be used to identify research needs. Lignin presents many challenges for use in the biorefinery. Chemically it differs from sugars having a complex aromatic substructure. Unlike cellulose, which has a relatively simple substructure of glucose subunits, lignin has a high degree of variability in its structure which differs both from biomass source and from the recovery process used. In addition to its variability lignin is also reactive and to some degree less stable thermally and oxidatively to other biomass streams. What this means is that integrating a lignin process stream within the biorefinery will require identifying the best method to separate lignin from biomass cost-effectively.

Holladay, John E.; White, James F.; Bozell, Joseph J.; Johnson, David

2007-10-01T23:59:59.000Z

74

Sugar-Based Ethanol Biorefinery: Ethanol, Succinic Acid and By-Product Production  

SciTech Connect

The work conducted in this project is an extension of the developments itemized in DE-FG-36-04GO14236. This program is designed to help the development of a biorefinery based around a raw sugar mill, which in Louisiana is an underutilized asset. Some technical questions were answered regarding the addition of a biomass to ethanol facility to existing sugar mills. The focus of this work is on developing technology to produce ethanol and valuable by-products from bagasse. Three major areas are addressed, feedstock storage, potential by-products and the technology for producing ethanol from dilute ammonia pre-treated bagasse. Sugar mills normally store bagasse in a simple pile. During the off season there is a natural degradation of the bagasse, due to the composting action of microorganisms in the pile. This has serious implications if bagasse must be stored to operate a bagasse/biorefinery for a 300+ day operating cycle. Deterioration of the fermentables in bagasse was found to be 6.5% per month, on pile storage. This indicates that long term storage of adequate amounts of bagasse for year-round operation is probably not feasible. Lignin from pretreatment seemed to offer a potential source of valuable by-products. Although a wide range of phenolic compounds were present in the effluent from dilute ammonia pretreatment, the concentrations of each (except for benzoic acid) were too low to consider for extraction. The cellulosic hydrolysis system was modified to produce commercially recoverable quantities of cellobiose, which has a small but growing market in the food process industries. A spin-off of this led to the production of a specific oligosaccharide which appears to have both medical and commercial implications as a fungal growth inhibitor. An alternate use of sugars produced from biomass hydrolysis would be to produce succinic acid as a chemical feedstock for other conversions. An organism was developed which can do this bioconversion, but the economics of succinic acid production were such that it could not compete with current commercial practice. To allow recovery of commercial amounts of ethanol from bagasse fermentation, research was conducted on high solids loading fermentations (using S. cerevisiae) with commercial cellulase on pretreated material. A combination of SHF/SSF treatment with fed-batch operation allowed fermentation at 30% solids loading. Supplementation of the fermentation with a small amount of black-strap molasses had results beyond expectation. There was an enhancement of conversion as well as production of ethanol levels above 6.0% w/w, which is required both for efficient distillation as well as contaminant repression. The focus of fermentation development was only on converting the cellulose to ethanol, as this yeast is not capable of fermenting both glucose and xylose (from hemicellulose). In anticipation of the future development of such an organism, we screened the commercially available xylanases to find the optimum mix for conversion of both cellulose and hemicellulose. A different mixture than the spezyme/novozyme mix used in our fermentation research was found to be more efficient at converting both cellulose and hemicellulose. Efforts were made to select a mutant of Pichia stipitis for ability to co-ferment glucose and xylose to ethanol. New mutation technology was developed, but an appropriate mutant has not yet been isolated. The ability to convert to stillage from biomass fermentations were determined to be suitable for anaerobic degradation and methane production. An economic model of a current sugar factory was developed in order to provide a baseline for the cost/benefit analysis of adding cellulosic ethanol production.

Donal F. Day

2009-03-31T23:59:59.000Z

75

ARM - About RSS Feeds  

NLE Websites -- All DOE Office Websites (Extended Search)

Guidance About RSS Feeds RSS, which stands for Really Simple Syndication, is an easy way to keep up with your favorite news and information. An RSS feed contains headlines,...

76

DOEGO85004_1: Final Non-proprietary Technical Report, Generating Process and Economic Data for Preliminary Design of PureVision Biorefineries DOEGO85004_2: One Original Final Proprietary Technical Report to be mailed to DOE Golden.  

SciTech Connect

The overall objective of the project was to define a two-stage reactive fractionation process for converting corn stover into a solid cellulose stream and two liquid streams containing mostly hemicellulosic sugars and lignin, respectively. Toward this goal, biomass fractionation was conducted using a small continuous pilot unit with a nominal capacity of 100 pounds per day of dry biomass to generate performance data using primarily corn stover as feedstock. In the course of the program, the PureVision process was optimized for efficient hemicellulose hydrolysis in the first stage employing autohydrolysis and delignification in the second stage using sodium hydroxide as a catalyst. The remaining cellulose was deemed to be an excellent substrate for producing fermentation sugars, requiring 40% less enzymes for hydrolysis than conventional pretreatment systems using dilute acid. The fractionated cellulose was also determined to have potential higher-value applications as a pulp product. The lignin coproduct was determined to be substantially lower in molecular weight (MW) compared to lignins produced in the kraft or sulfite pulping processes. This low-MW lignin can be used as a feed and concrete binder and as an intermediate for producing a range of high-value products including phenolic resins. This research adds to the understanding of the biomass conversion area in that a new process was developed in the true spirit of biorefineries. The work completed successfully demonstrated the technical effectiveness of the process at the pilot level indicating the technology is ready to advance to a 23 ton per day scale. No technical showstoppers are anticipated in scaling up the PureVision fractionation process to commercial scale. Also, economic feasibility of using the PureVision process in a commercial-scale biorefinery was investigated and the minimum ethanol selling price for the PureVision process was calculated to be $0.94/gal ethanol vs. $1.07/gal ethanol for the NREL process. Thus, the PureVision process is economically attractive. Given its technical and economic feasibility, the project is of benefit to the public in the following ways: 1) it demonstrated a novel biomass fractionation process that can provide domestic supply of renewable transportation fuel from all three biomass components (cellulose, hemicellulose and lignin), 2) the lignin stream from the process has many higher-value applications beyond simply burning the lignin for energy as proposed by competing technologies, 3) it can be deployed in rural areas and create jobs in these areas, and 3) it can add to the nations economy and security.

Kadam, Kiran L., Ph.D; Lehrburger, Ed

2008-01-17T23:59:59.000Z

77

NETL: Gasification Systems - Feed Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed Systems Gasification Systems Feed Systems Research on commercial gasifier feed systems is occurring in two primary areas of fuel (i.e. coal, biomass, etc.) feed and advanced...

78

A Process Integration Approach to the Strategic Design and Scheduling of Biorefineries  

E-Print Network (OSTI)

This work focused upon design and operation of biodiesel production facilities in support of the broader goal of developing a strategic approach to the development of biorefineries. Biodiesel production provided an appropriate starting point for these efforts. The work was segregated into two stages. Various feedstocks may be utilized to produce biodiesel, to include virgin vegetable oils and waste cooking oil. With changing prices, supply, and demand of feedstocks, a need exists to consider various feedstock options. The objective of the first stage was to develop a systematic procedure for scheduling and operation of flexible biodiesel plants accommodating a variety of feedstocks. This work employed a holistic approach and combination of process simulation, synthesis, and integration techniques to provide: process simulation of a biodiesel plant for various feedstocks, integration of energy and mass resources, optimization of process design and scheduling, and techno-economic assessment and sensitivity analysis of proposed schemes. An optimization formulation was developed to determine scheduling and operation for various feedstocks and a case study solved to illustrate the merits of the devised procedure. With increasing attention to the environmental impact of discharging greenhouse gases (GHGs), there has been growing public pressure to reduce the carbon footprint associated with fossil fuel use. In this context, one key strategy is substitution of fossil fuels with biofuels such as biodiesel. Design of biodiesel plants has traditionally been conducted based on technical and economic criteria. GHG policies have the potential to significantly alter design of these facilities, selection of feedstocks, and scheduling of multiple feedstocks. The objective of the second stage was to develop a systematic approach to design and scheduling of biodiesel production processes while accounting for the effect of GHG policies. An optimization formulation was developed to maximize profit of the process subject to flowsheet synthesis and performance modeling equations. The carbon footprint is accounted for through a life cycle analysis (LCA). The objective function includes a term reflecting the impact of the LCA of a feedstock and its processing to biodiesel. A multiperiod approach was used and a case study solved with several scenarios of feedstocks and GHG policies.

Elms, Rene ?Davina

2009-12-01T23:59:59.000Z

79

In The News Feed  

NLE Websites -- All DOE Office Websites (Extended Search)

omputing-past-present-and-future August 15, 2013 In The News Feed Solar power to trump shale, helped by US military http:www.telegraph.co.ukfinancecomment...

80

Infectious waste feed system  

DOE Patents (OSTI)

An infectious waste feed system for comminuting infectious waste and feeding the comminuted waste to a combustor automatically without the need for human intervention. The system includes a receptacle for accepting waste materials. Preferably, the receptacle includes a first and second compartment and a means for sealing the first and second compartments from the atmosphere. A shredder is disposed to comminute waste materials accepted in the receptacle to a predetermined size. A trough is disposed to receive the comminuted waste materials from the shredder. A feeding means is disposed within the trough and is movable in a first and second direction for feeding the comminuted waste materials to a combustor.

Coulthard, E. James (York, PA)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT  

DOE Green Energy (OSTI)

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates have been completed and issued for review. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter. Initial pilot facility shakedown was completed during the fourth quarter. During pilot plant shakedown operations, several production batch test runs were performed. These pilot tests were coupled with laboratory testing to confirm pilot results. In initial batches of operations, cellulose to glucose conversions of 62.5% and 64.8% were observed in laboratory hydrolysis. As part of this testing, lignin dewatering was tested using laboratory and vendor-supplied filtration equipment. Dewatering tests reported moisture contents in the lignin of between 50% and 60%. Dewatering parameters and options will continue to be investigated during lignin production. After some unavoidable delays, a suitable representative supply of MSW feed material was procured. Shredding of the feed material was completed and final drying of the feed is expected to be completed by late January. Once feed drying is completed, pilot facility production will begin to produce lignin for co-fire testing. Facility modifications are expected to continue to improve facility operations and performance during the first quarter of 2001. The TVA-Colbert facility continues to make progress in evaluating the co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system continues.

Ted Berglund; Jeffrey T. Ranney; Carol L. Babb; Jacqueline G. Broder

2001-01-01T23:59:59.000Z

82

CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT  

DOE Green Energy (OSTI)

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates have been completed and issued for review. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter of 2000. Initial pilot facility shakedown was completed during the fourth quarter. After some unavoidable delays, a suitable representative supply of municipal solid waste (MSW) feed material was procured. During this quarter (first quarter of 2001), shredding of the feed material was completed and final feed conditioning was completed. Pilot facility hydrolysis production was completed to produce lignin for co-fire testing. Pilot facility modifications continued to improve facility operations and performance during the first quarter of 2001. Samples of the co-fire fuel material were sent to the co-fire facility for evaluation. The TVA-Colbert facility has neared completion of the task to evaluate the co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system have been completed and a cost estimate for steam supply system is being developed.

Ted Berglund; Jeffrey T. Ranney; Carol L. Babb; Jacqueline G. Broder

2001-04-01T23:59:59.000Z

83

Coal feed lock  

DOE Patents (OSTI)

A coal feed lock is provided for dispensing coal to a high pressure gas producer with nominal loss of high pressure gas. The coal feed lock comprises a rotor member with a diametral bore therethrough. A hydraulically activated piston is slidably mounted in the bore. With the feed lock in a charging position, coal is delivered to the bore and then the rotor member is rotated to a discharging position so as to communicate with the gas producer. The piston pushes the coal into the gas producer. The rotor member is then rotated to the charging position to receive the next load of coal.

Pinkel, I. Irving (Fairview Park, OH)

1978-01-01T23:59:59.000Z

84

DOE/EA-1628: Environmental Assessment for Construction and Operation of a Proposed Lignocellulosic Biorefinery, POET Project LIBERTY, LLC. (September 2008)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Notice of Wetlands and Notice of Wetlands Involvement Construction and Operation of a Proposed Lignocellulosic Biorefinery, POET Project LIBERTY, LLC. Emmetsburg, Iowa Prepared for U.S. Department of Energy by September 2008 September 2008 i POET Project LIBERTY - Final EA 9-26-08.doc Contents Executive Summary ............................................................................................................................................i Acronyms, Abbreviations, and Terms............................................................................................................iv 1.0 Introduction ............................................................................................................................................ 1-1 1.1 Background......................................................................................................................................

85

CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT  

DOE Green Energy (OSTI)

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates were completed and issued. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter of 2000. Initial pilot facility shakedown was completed. After some unavoidable delays, a suitable representative supply of MSW feed material was procured. During this first quarter of 2001, shredding of the feed material and final feed conditioning were completed. Pilot facility hydrolysis production was completed to produce lignin for co-fire testing and the lignin fuel was washed and dewatered. Both the lignin and bio-solids fuel materials for co-fire testing were sent to the co-fire facility (EERC) for evaluation and co-firing. EERC has received coal typical of the fuel to the TVA-Colbert boilers. This material will be used at EERC as baseline material and for mixing with the bio-fuel for combustion testing. EERC combustion testing of the bio-based fuels is scheduled to begin in October of 2001. The TVA-Colbert facility has neared completion of the task to evaluate co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system have been completed and a cost estimate for steam supply system was completed. The cost estimate and the output and heat rate impacts will be used to determine a preliminary price for the exported steam.

Ted Berglund; Jeffrey T. Ranney; Carol L. Babb; Jacqueline G. Broder

2001-10-01T23:59:59.000Z

86

THE CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT  

DOE Green Energy (OSTI)

The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates were completed and issued. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter of 2000. Initial pilot facility shakedown was completed during the fourth quarter. After some unavoidable delays, a suitable representative supply of MSW feed material was procured. During this first quarter of 2001, shredding of the feed material and final feed conditioning were completed. Pilot facility hydrolysis production was completed to produce lignin for co-fire testing. During this quarter, TVA completed the washing and dewatering of the lignin material produced from the MSW hydrolysis. Seven drums of lignin material were washed to recover the acid and sugar from the lignin and provide an improved fuel for steam generation. Samples of both the lignin and bio-solids fuel materials for co-fire testing were sent to the co-fire facility (EERC) for evaluation. After sample evaluation, EERC approved sending the material and all of the necessary fuel for testing was shipped to EERC. EERC has requested and will receive coal typical of the fuel to the TVA-Colbert boilers. This material will be used at EERC as baseline material and for mixing with the bio-fuel for combustion testing. EERC combustion testing of the bio based fuels is scheduled to begin in August of 2001. The TVA-Colbert facility has neared completion of the task to evaluate the co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system have been completed and a cost estimate for steam supply system was completed. The cost estimate and the output and heat rate impacts will be used to determine a preliminary price for the exported steam. The preliminary steam price will be determined in the next quarter.

Ted Berglund; Jeffrey T. Ranney; Carol L. Babb; Jacqueline G. Broder

2001-07-01T23:59:59.000Z

87

NREL: News - RSS Feeds  

NLE Websites -- All DOE Office Websites (Extended Search)

RSS Feeds RSS Feeds RSS, or Really Simple Syndication, is an easy way to track NREL news automatically. NREL news is available in the following RSS feeds. Research Programs Biomass Buildings Concentrating Solar Power Defense Geothermal Technologies Hydrogen and Fuel Cells Photovoltaics Vehicles and Fuels Wind News Awards and Honors Continuum Magazine Feature Stories News Releases Community Involvement Education Education Center Executive Energy Program Technology Applications Sustainable NREL Technology Deployment Technology Transfer Learn more about RSS. Printable Version NREL Newsroom Home Feature News News Releases Events Awards Research Support Facility Energy Systems Integration Facility Related Links NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC

88

Dust feed mechanism  

DOE Patents (OSTI)

The invention is a dust feed device for delivery of a uniform supply of dust for long periods of time to an aerosolizing means for production of a dust suspension. The device utilizes at least two tandem containers having spiral brushes within the containers which transport the dust from a supply to the aerosolizer means.

Milliman, Edward M. (Benton City, WA)

1984-01-01T23:59:59.000Z

89

Dust-feed mechanism  

DOE Patents (OSTI)

The invention is a dust feed device for delivery of a uniform supply of dust for long periods of time to an aerosolizing means for production of a dust suspension. The device utilizes at least two tandem containers having spiral brushes within the containers which transport the dust from a supply to the aerosolizer means.

Milliman, E.M.

1981-04-06T23:59:59.000Z

90

Strategic Biorefinery Analysis: Analysis of Biorefineries  

DOE Green Energy (OSTI)

Subcontract report prepared by Dartmouth College that identifies and discusses the advantages of producing ethanol in a biomass refinery as compared to a single-product facility.

Lynd, L. R.; Wyman, C.; Laser, M.; Johnson, D.; Landucci, R.

2005-10-01T23:59:59.000Z

91

Blog Feed: Vehicles  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

feed-vehicles 1000 Independence Ave. SW Washington feed-vehicles 1000 Independence Ave. SW Washington DC 20585 202-586-5000 en Our Best Energy Videos of 2013 http://energy.gov/articles/our-best-energy-videos-2013 Our Best Energy Videos of 2013

92

RSS Feed - Energy Innovation Portal  

The Energy Innovation Portal offers RSS feeds covering updates to technology marketing summaries. RSS stands for "Really Simple Syndication."

93

Feed-in tariffs Kosovo  

Science Conference Proceedings (OSTI)

In this paper is presented the possibility of using the renewable energy resources and promoting the renewable energy resources (RER) by feed-in tariff schema. 'Feed-in' tariff is a description of a policy, a "tariff" used to purchase RER generated energy ... Keywords: CO2, biomass, clean environmental, energy, european directive, feed-in tariffs, water, wind

Blerim Rexha; Bedri Dragusha; Ilir Limani

2010-02-01T23:59:59.000Z

94

Clean Cities: Subscribe to RSS Feeds  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

posted on the website. RSS Feed icon Subscribe to the Clean Cities News feed. Additional Energy Efficiency and Renewable Energy RSS Feeds DOE's Office of Energy Efficiency and...

95

RSS Feeds | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feeds Feeds RSS Feeds The Office of Energy Efficiency and Renewable Energy (EERE) offers RSS feeds covering news and other updates from EERE and its programs. Learn about RSS. Subscribe to Corporate EERE News EERE News Releases Subscribe to receive news releases covering all topics. Subscribe to receive EERE news releases feed. Energy Efficiency and Renewable Energy Network News Subscribe to receive ENN stories covering all topics. Subscribe to receive EERE Network News feed. EERE Blog The EERE Blog includes updates on current EERE projects, interviews with energy experts, and other stories about EERE's technology offices, crosscutting initiatives, and national laboratories. Learn more. Subscribe to RSS feed. Energy Saver Blog A place for consumers to learn about and discuss ways to be energy

96

In The News Feed  

NLE Websites -- All DOE Office Websites (Extended Search)

0:56:00 -0600 Wed, 08 Jan 2014 0:56:00 -0600 Wed, 08 Jan 2014 11:33:34 -0600 Report offers Congress alternatives to corral Asian carp and other aquatic nuisance species http://www.anl.gov/articles/report-offers-congress-alternatives-corral-asian-carp-and-other-aquatic-nuisance-species Argonne's Environmental Science Division has been working with the Chicago District of the U.S. Army Corps of Engineers on the Great Lakes and Mississippi River Interbasin Study to determine the risks that aquatic nuisance species, such as Asian carp, will move between the two basins through aquatic pathways. January 8, 2014 In The News Feed A wrong molecular turn leads down the path to type 2 diabetes http://www.anl.gov/articles/wrong-molecular-turn-leads-down-path-type-2-diabetes Computing resources at Argonne have helped researchers better grasp how

97

Multiple feed powder splitter  

DOE Patents (OSTI)

A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

98

Multiple feed powder splitter  

DOE Patents (OSTI)

A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

99

Ecofys Feed | Open Energy Information  

Open Energy Info (EERE)

Ecofys Feed Ecofys Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

100

Feed Microscopy Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Feed Microscopy using microscopic examination of animal feed samples and AAFCO terminology. Feed Microscopy Laboratory Proficiency Testing Program Agricultural Microscopy agri-food sector agricultural Agricultural Micr

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

TMS RSS feeds and terms of use  

Science Conference Proceedings (OSTI)

How to Access TMS RSS Feeds. Subscribe to TMS' RSS (Really Simple Syndication) news feeds to get the latest society and materials technology news...

102

Rotary powder feed through apparatus  

DOE Patents (OSTI)

A device for increasing the uniformity of solids within a solids fabrication system, such as a direct light fabrication (DLF) system in which gas entrained powders are passed through the focal point of a moving high-power light which fuses the particles in the powder to a surface being built up in layers. The invention provides a feed through interface wherein gas entrained powders input from stationary input lines are coupled to a rotating head of the fabrication system. The invention eliminates the need to provide additional slack in the feed lines to accommodate head rotation, and therefore reduces feed line bending movements which induce non-uniform feeding of gas entrained powder to a rotating head.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

103

ENDA Feed | Open Energy Information  

Open Energy Info (EERE)

ENDA Feed ENDA Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

104

About RSS Feeds | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feeds » About RSS Feeds Feeds » About RSS Feeds About RSS Feeds RSS, or Really Simple Syndication, is a format that Web site owners use to publish regularly-updated content. RSS is a great way for you to get updates from your favorite Web sites without having to go to the sites first. Many people use RSS feeds to stay informed on a variety of topics. How do I use RSS feeds? The first step is to choose an RSS reader, which collects and displays feeds in an easy-to-read format. Most Web browsers and e-mail applications have this capability built in. You can also sign up for free online readers or download and install a reader for your desktop. The reader automatically checks for new items and will display each one with a title and short description. How can I subscribe to an RSS feed?

105

Clean Cities: Subscribe to RSS Feeds  

NLE Websites -- All DOE Office Websites (Extended Search)

News News Printable Version Share this resource Send a link to Clean Cities: Subscribe to RSS Feeds to someone by E-mail Share Clean Cities: Subscribe to RSS Feeds on Facebook Tweet about Clean Cities: Subscribe to RSS Feeds on Twitter Bookmark Clean Cities: Subscribe to RSS Feeds on Google Bookmark Clean Cities: Subscribe to RSS Feeds on Delicious Rank Clean Cities: Subscribe to RSS Feeds on Digg Find More places to share Clean Cities: Subscribe to RSS Feeds on AddThis.com... News Blog Newsletter Information for Media Subscribe to RSS Feeds The Clean Cities RSS (real simple syndication) feeds track news from the U.S. Department of Energy (DOE) and other sources, making it convenient and easy to stay up to date with the Clean Cities program and alternative transportation technologies. Learn more about RSS.

106

Feed mechanism and method for feeding minute items  

DOE Patents (OSTI)

A feeding mechanism and method for feeding minute items, such as capacitors, resistors, or solder preforms. The mechanism is adapted to receive a plurality of the randomly-positioned and randomly-oriented extremely small or minute items, and to isolate, orient, and position the items in a specific repeatable pickup location wherefrom they may be removed for use by, for example, a computer-controlled automated assembly machine. The mechanism comprises a sliding shelf adapted to receive and support the items; a wiper arm adapted to achieve a single even layer of the items; and a pushing arm adapted to push the items into the pickup location. The mechanism can be adapted for providing the items with a more exact orientation, and can also be adapted for use in a liquid environment.

Stringer, Timothy Kent; Yerganian, Simon Scott

2012-11-06T23:59:59.000Z

107

About RSS Feeds | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Us » News & Blog » RSS Feeds » About RSS Feeds Us » News & Blog » RSS Feeds » About RSS Feeds About RSS Feeds RSS, or Really Simple Syndication, is a format that Web site owners use to publish regularly-updated content. RSS is a great way for you to get updates from your favorite Web sites without having to go to the sites first. Many people use RSS feeds to stay informed on a variety of topics. How do I use RSS feeds? The first step is to choose an RSS reader, which collects and displays feeds in an easy-to-read format. Most Web browsers and e-mail applications have this capability built in. You can also sign up for free online readers or download and install a reader for your desktop. The reader automatically checks for new items and will display each one with a title and short description.

108

Building Technologies Office: Subscribe to RSS Feeds  

NLE Websites -- All DOE Office Websites (Extended Search)

Club Award April 23, 2013 Home Performance with ENERGY STAR Sponsors Honored at 2013 ENERGY STAR Awards March 27, 2013 More News Subscribe to RSS News Feed RSS Feed icon Webinars...

109

Switching Feeding Among Sound and Infected Prey  

Science Conference Proceedings (OSTI)

Here we investigate the switching feeding behavior of predators in the context of one single prey population

Ines S. Hotopp; Horst Malchow; Ezio Venturino

2009-01-01T23:59:59.000Z

110

Fluidized bed boiler feed system  

SciTech Connect

A fluidized bed boiler feed system for the combustion of pulverized coal. Coal is first screened to separate large from small particles. Large particles of coal are fed directly to the top of the fluidized bed while fine particles are first mixed with recycled char, preheated, and then fed into the interior of the fluidized bed to promote char burnout and to avoid elutriation and carryover.

Jones, Brian C. (Windsor, CT)

1981-01-01T23:59:59.000Z

111

National Geo-Database for Biofuel Simulations and Regional Analysis of Biorefinery Siting Based on Cellulosic Feedstock Grown on Marginal Lands  

DOE Green Energy (OSTI)

The goal of this project undertaken by GLBRC (Great Lakes Bioenergy Research Center) Area 4 (Sustainability) modelers is to develop a national capability to model feedstock supply, ethanol production, and biogeochemical impacts of cellulosic biofuels. The results of this project contribute to sustainability goals of the GLBRC; i.e. to contribute to developing a sustainable bioenergy economy: one that is profitable to farmers and refiners, acceptable to society, and environmentally sound. A sustainable bioenergy economy will also contribute, in a fundamental way, to meeting national objectives on energy security and climate mitigation. The specific objectives of this study are to: (1) develop a spatially explicit national geodatabase for conducting biofuel simulation studies and (4) locate possible sites for the establishment of cellulosic ethanol biorefineries. To address the first objective, we developed SENGBEM (Spatially Explicit National Geodatabase for Biofuel and Environmental Modeling), a 60-m resolution geodatabase of the conterminous USA containing data on: (1) climate, (2) soils, (3) topography, (4) hydrography, (5) land cover/ land use (LCLU), and (6) ancillary data (e.g., road networks, federal and state lands, national and state parks, etc.). A unique feature of SENGBEM is its 2008-2010 crop rotation data, a crucially important component for simulating productivity and biogeochemical cycles as well as land-use changes associated with biofuel cropping. ARRA support for this project and to the PNNL Joint Global Change Research Institute enabled us to create an advanced computing infrastructure to execute millions of simulations, conduct post-processing calculations, store input and output data, and visualize results. These computing resources included two components installed at the Research Data Center of the University of Maryland. The first resource was 'deltac': an 8-core Linux server, dedicated to county-level and state-level simulations and PostgreSQL database hosting. The second resource was the DOE-JGCRI 'Evergreen' cluster, capable of executing millions of simulations in relatively short periods. ARRA funding also supported a PhD student from UMD who worked on creating the geodatabases and executing some of the simulations in this study. Using a physically based classification of marginal lands, we simulated production of cellulosic feedstocks from perennial mixtures grown on these lands in the US Midwest. Marginal lands in the western states of the US Midwest appear to have significant potential to supply feedstocks to a cellulosic biofuel industry. Similar results were obtained with simulations of N-fertilized perennial mixtures. A detailed spatial analysis allowed for the identification of possible locations for the establishment of 34 cellulosic ethanol biorefineries with an annual production capacity of 5.6 billion gallons. In summary, we have reported on the development of a spatially explicit national geodatabase to conduct biofuel simulation studies and provided simulation results on the potential of perennial cropping systems to serve as feedstocks for the production of cellulosic ethanol. To accomplish this, we have employed sophisticated spatial analysis methods in combination with the process-based biogeochemical model EPIC. The results of this study will be submitted to the USDOE Bioenergy Knowledge Discovery Framework as a way to contribute to the development of a sustainable bioenergy industry. This work provided the opportunity to test the hypothesis that marginal lands can serve as sources of cellulosic feedstocks and thus contribute to avoid potential conflicts between bioenergy and food production systems. This work, we believe, opens the door for further analysis on the characteristics of cellulosic feedstocks as major contributors to the development of a sustainable bioenergy economy.

Izaurralde, Roberto C.; Zhang, Xuesong; Sahajpal, Ritvik; Manowitz, David H.

2012-04-01T23:59:59.000Z

112

National Geo-Database for Biofuel Simulations and Regional Analysis of Biorefinery Siting Based on Cellulosic Feedstock Grown on Marginal Lands  

SciTech Connect

The goal of this project undertaken by GLBRC (Great Lakes Bioenergy Research Center) Area 4 (Sustainability) modelers is to develop a national capability to model feedstock supply, ethanol production, and biogeochemical impacts of cellulosic biofuels. The results of this project contribute to sustainability goals of the GLBRC; i.e. to contribute to developing a sustainable bioenergy economy: one that is profitable to farmers and refiners, acceptable to society, and environmentally sound. A sustainable bioenergy economy will also contribute, in a fundamental way, to meeting national objectives on energy security and climate mitigation. The specific objectives of this study are to: (1) develop a spatially explicit national geodatabase for conducting biofuel simulation studies and (4) locate possible sites for the establishment of cellulosic ethanol biorefineries. To address the first objective, we developed SENGBEM (Spatially Explicit National Geodatabase for Biofuel and Environmental Modeling), a 60-m resolution geodatabase of the conterminous USA containing data on: (1) climate, (2) soils, (3) topography, (4) hydrography, (5) land cover/ land use (LCLU), and (6) ancillary data (e.g., road networks, federal and state lands, national and state parks, etc.). A unique feature of SENGBEM is its 2008-2010 crop rotation data, a crucially important component for simulating productivity and biogeochemical cycles as well as land-use changes associated with biofuel cropping. ARRA support for this project and to the PNNL Joint Global Change Research Institute enabled us to create an advanced computing infrastructure to execute millions of simulations, conduct post-processing calculations, store input and output data, and visualize results. These computing resources included two components installed at the Research Data Center of the University of Maryland. The first resource was 'deltac': an 8-core Linux server, dedicated to county-level and state-level simulations and PostgreSQL database hosting. The second resource was the DOE-JGCRI 'Evergreen' cluster, capable of executing millions of simulations in relatively short periods. ARRA funding also supported a PhD student from UMD who worked on creating the geodatabases and executing some of the simulations in this study. Using a physically based classification of marginal lands, we simulated production of cellulosic feedstocks from perennial mixtures grown on these lands in the US Midwest. Marginal lands in the western states of the US Midwest appear to have significant potential to supply feedstocks to a cellulosic biofuel industry. Similar results were obtained with simulations of N-fertilized perennial mixtures. A detailed spatial analysis allowed for the identification of possible locations for the establishment of 34 cellulosic ethanol biorefineries with an annual production capacity of 5.6 billion gallons. In summary, we have reported on the development of a spatially explicit national geodatabase to conduct biofuel simulation studies and provided simulation results on the potential of perennial cropping systems to serve as feedstocks for the production of cellulosic ethanol. To accomplish this, we have employed sophisticated spatial analysis methods in combination with the process-based biogeochemical model EPIC. The results of this study will be submitted to the USDOE Bioenergy Knowledge Discovery Framework as a way to contribute to the development of a sustainable bioenergy industry. This work provided the opportunity to test the hypothesis that marginal lands can serve as sources of cellulosic feedstocks and thus contribute to avoid potential conflicts between bioenergy and food production systems. This work, we believe, opens the door for further analysis on the characteristics of cellulosic feedstocks as major contributors to the development of a sustainable bioenergy economy.

Izaurralde, Roberto C.; Zhang, Xuesong; Sahajpal, Ritvik; Manowitz, David H.

2012-04-01T23:59:59.000Z

113

Fossil Energy RSS Feeds | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fossil Energy RSS Feeds Fossil Energy RSS Feeds Fossil Energy RSS Feeds RSS, sometimes known as Really Simple Syndication, is a popular means of sharing content (such as news headlines) without requiring readers to constantly visit a Web site to see what's new. RSS feeds contain headlines and hyperlinks to longer articles or Web pages. RSS feeds from the Office of Fossil Energy provide updates of specific interest to the fossil fuel community. Fossil Energy RSS feeds are free of charge. RSS content can be read using software called an RSS reader, feed reader, or an aggregator, which can be web-based or desktop-based. Click on RSS button below to subscribe to Fossil Energy latest news. All Fossil Energy News Clean Coal Technology News Carbon Capture and Storage News Oil & Natural Gas News

114

Feed-in Tariff | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feed-in Tariff Feed-in Tariff Feed-in Tariff < Back Eligibility Commercial Industrial Residential Savings Category Bioenergy Buying & Making Electricity Water Solar Home Weatherization Wind Program Info State Hawaii Program Type Performance-Based Incentive Rebate Amount Rates for Tier 1 and Tier 2 vary by system size and technology Rates for Tier 3 vary by technology Provider Hawaii Public Utilities Commission In September 2009, the Hawaii Public Utilities Commission (PUC) issued a decision that established a feed-in tariff in Hawaii. The feed-in tariff is offered by the three investor-owned utilities: HECO, MECO and HELCO. The rates for the feed-in tariff, schedule, and standard interconnection agreements were approved on October 13, 2010. This program will be reviewed by the PUC two years after the start of the program and every three years

115

Burco Farm and Feed | Open Energy Information  

Open Energy Info (EERE)

Burco Farm and Feed Burco Farm and Feed Jump to: navigation, search Name Burco Farm and Feed Facility Burco Farm and Feed Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner Burco Farm and Feed Energy Purchaser Burco Farm and Feed Location Independence IA Coordinates 42.5638438°, -91.88753486° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.5638438,"lon":-91.88753486,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

116

NETL: Coal/Biomass Feed and Gasification  

NLE Websites -- All DOE Office Websites (Extended Search)

Coal/Biomass Feed & Gasification Coal/Biomass Feed & Gasification Coal and Coal/Biomass to Liquids Coal/Biomass Feed and Gasification The Coal/Biomass Feed and Gasification Key Technology is advancing scientific knowledge of the production of liquid hydrocarbon fuels from coal and/or coal-biomass mixtures. Activities support research for handling and processing of coal/biomass mixtures, ensuring those mixtures are compatible with feed delivery systems, identifying potential impacts on downstream components, catalyst and reactor optimization, and characterizing the range of products and product quality. Active projects within the program portfolio include the following: Coal-biomass fuel preparation Development of Biomass-Infused Coal Briquettes for Co-Gasification Coal-biomass gasification modeling

117

Waste feed delivery planning at Hanford  

Science Conference Proceedings (OSTI)

The Integrated Waste Feed Delivery Plan (IWFDP) describes how waste feed will be delivered to the Waste Treatment and Immobilization Plant (WTP) to safely and efficiently accomplish the River Protection Project (RPP) mission. The IWFDP, which is integrated with the Baseline Case operating scenario, is comprised of three volumes. Volume 1 - Process Strategy provides an overview of waste feed delivery (WFD) and describes how the WFD system will be used to prepare and deliver feed to the WTP based on the equipment configuration and functional capabilities of the WFD system. Volume 2 - Campaign Plan describes the plans for the first eight campaigns for delivery to the WTP, evaluates projected feed for systematic issues, projects 242-A Evaporator campaigns, and evaluates double-shell tank (DST) space and availability of contingency feed. Volume 3 - Project Plan identifies the scope and timing of the DST and infrastructure upgrade projects necessary to feed the WTP, and coordinates over 30 projectized projects and operational activities that comprise the needed WFD upgrades.

Certa, Paul J.; West, Elizha B.; Rodriguez, Juissepp S.; Hohl, Ted M.; Larsen, Douglas C.; Ritari, Jaakob S.; Kelly, James W.

2013-01-10T23:59:59.000Z

118

Netherlands Development Organisation Feed | Open Energy Information  

Open Energy Info (EERE)

Organisation Feed Organisation Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

119

Joint Implementation Network Feed | Open Energy Information  

Open Energy Info (EERE)

Network Feed Network Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

120

Climate Technology Initiative Feed | Open Energy Information  

Open Energy Info (EERE)

Initiative Feed Initiative Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Analysis of Integrated Tropical Biorefineries  

E-Print Network (OSTI)

such as fast- pyrolysis and catalytic fast-pyrolysis for producing liquid fuels from biomass feedstocks biomass to a fast-pyrolysis reactor (Table 3.4), the greatest mass yield of bio-oil can be attributed............................................................................................- 70 - TABLE 2.18. BIOMASS PYROLYSIS TECHNOLOGIES, REACTION CONDITIONS AND PRODUCTS................- 70

122

Bioenergy Technologies Office: Integrated Biorefineries  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

transportation fuels, chemicals, and heat and power. Biofuels Infrastructure moves the fuel from a biorefining plant to the pump. Bioenergy is used to power today's vehicles. A...

123

Commercializing Biorefineries The Path Forward  

E-Print Network (OSTI)

PIX 16702 For more information contact: EERE Information Center 1-877-EERE-INF (1-877-337-3463) www.eere

124

RSS and Podcast News Feeds | OSTI, US Dept of Energy, Office...  

Office of Scientific and Technical Information (OSTI)

appropriate URL in your feed reader OSTI News Feed OSTI News Feed http:www.osti.govhomesiteswww.osti.gov.homefilesimportednewsfeedsrss-osti.xml OSTI News Feed OSTI Blog...

125

NNSA Production Office tops Feds Feed Families campaign goal...  

National Nuclear Security Administration (NNSA)

Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > NNSA Production Office tops Feds Feed Families ... NNSA Production Office tops Feds Feed Families...

126

Transient Melt Pool Response in Wire Feed Electron Beam Direct ...  

Science Conference Proceedings (OSTI)

Presentation Title, Transient Melt Pool Response in Wire Feed Electron Beam Direct ... Abstract Scope, Wire feed electron beam direct digital manufacturing...

127

Plasma arc torch with coaxial wire feed  

SciTech Connect

A plasma arc welding apparatus having a coaxial wire feed. The apparatus includes a plasma arc welding torch, a wire guide disposed coaxially inside of the plasma arc welding torch, and a hollow non-consumable electrode. The coaxial wire guide feeds non-electrified filler wire through the tip of the hollow non-consumable electrode during plasma arc welding. Non-electrified filler wires as small as 0.010 inches can be used. This invention allows precision control of the positioning and feeding of the filler wire during plasma arc welding. Since the non-electrified filler wire is fed coaxially through the center of the plasma arc torch's electrode and nozzle, the wire is automatically aimed at the optimum point in the weld zone. Therefore, there is no need for additional equipment to position and feed the filler wire from the side before or during welding.

Hooper, Frederick M (Albuquerque, NM)

2002-01-01T23:59:59.000Z

128

Nutritional and Feeding Management of Broodmares  

E-Print Network (OSTI)

Nutritional well-being is an important part of an effective broodmare operation. The importance of roughage and concentrate feeds in the diets of broodmares at various stages of gestation and during lactation is discussed.

Gibbs, Pete G.; Potter, Gary D.; Vogelsang, M. M.

2005-04-13T23:59:59.000Z

129

Feeding Young Horses For Sound Development  

E-Print Network (OSTI)

Horse owners must decide whether their young horses will be fed for moderate or rapid growth. One concern is the occurrence of bone and joint disorders in young horses that develop rapidly. Research has shown that this and other problems can be decreased by ensuring that young horses receive proper nutrition. Specific recommendations are included for creep feeding foals and for feeding weanlings and yearlings. Nutritional levels are discussed in relation to the amount of exercise young horses receive.

Gibbs, Pete G.; Potter, Gary D.

2005-05-25T23:59:59.000Z

130

RSS Feeds | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Events » RSS Feeds Events » RSS Feeds Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications Contact BES Home News & Events RSS Feeds Print Text Size: A A A RSS Feeds FeedbackShare Page DOE EFRC Announcements Feed DOE EFRC Announcements Feed - Official DOE news and events about the EFRCs. EFRC News Feed EFRC News Feed - External news coverage of the EFRCs EFRC Events Feed EFRC Events Feed - High profile events organized by the EFRCs RSS, which stands for Really Simple Syndication, is an easy way to keep up with your favorite news and information. An RSS feed contains headlines, summaries and links to full news stories on www.energy.gov. If you click an RSS link, you will see XML (or eXtensible M arkup Language) code in your

131

Commercial Feeding Stuffs, September 1, 1921, to August 31, 1922.  

E-Print Network (OSTI)

Introduction; Summary of the Texas Feed Law; How to Comply with the Texas Feed Law; Standards and Definitions Adopted; Rulings Under the Law; Tentative Guarantees for Feed; Average Composition of Feeding Stuffs on Basis of Inspection; Shipments Withdrawn from Sale; Co-operation with the U. S. Department of Agriculture; Wheat By-Products; Results of Analyses; Table of Inspection Results;

Youngblood, B. (Bonney)

1922-01-01T23:59:59.000Z

132

A neural network approach to the selection of feed mix in the feed industry  

Science Conference Proceedings (OSTI)

Due to frequent changes of feed mix, the anticipation of pellet quality becomes a cumbersome task for a mill. This paper suggests that the artificial neural network can be used to predict the production rate and percentage of dust for a particular mill. ... Keywords: Artificial neural network, Feed cost, Least cost formulation, Pelleting cost, Pelleting rate

Supachai Pathumnakul; Kullapapruk Piewthongngam; Arthit Apichottanakul

2009-08-01T23:59:59.000Z

133

World Watch Institute Feed | Open Energy Information  

Open Energy Info (EERE)

World Watch Institute Feed World Watch Institute Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

134

United Nations Foundation Feed | Open Energy Information  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

135

International Energy Agency Feed | Open Energy Information  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

136

Feed Resource Recovery | Open Energy Information  

Open Energy Info (EERE)

Feed Resource Recovery Feed Resource Recovery Jump to: navigation, search Name Feed Resource Recovery Place Wellesley, Massachusetts Product Start-up planning to convert waste to fertilizer and biomethane gas. Coordinates 42.29776°, -71.289744° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.29776,"lon":-71.289744,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

137

ClimateWorks Feed | Open Energy Information  

Open Energy Info (EERE)

ClimateWorks Feed ClimateWorks Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

138

Blog Feed: Vehicles | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Blog Feed: Vehicles Blog Feed: Vehicles Blog Feed: Vehicles RSS January 16, 2014 Live Discussion on Energy 101: Fuel Cells Watch our Google+ Hangout on Energy 101: Fuel Cells to learn everything you need to know about fuel cells. January 15, 2014 Wide Bandgap Semiconductors: Essential to Our Technology Future Learn how wide bandgap semiconductor-based power electronics could impact clean energy technology and our daily lives. January 6, 2014 The Clean Energy Economy in Three Charts Over the last five years, American inventors and investors have made significant progress in developing and deploying key clean energy technologies -- supported by Energy Department policies. January 3, 2014 Our Best Energy Videos of 2013 Check out our best videos from 2013 -- from Secretary Moniz's first day on

139

Feed-In Tariff | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Feed-In Tariff Feed-In Tariff < Back Eligibility Agricultural Commercial Industrial Local Government Residential State Government Savings Category Bioenergy Biofuels Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Solar Home Weatherization Wind Program Info Start Date 2/14/2008 State California Program Type Performance-Based Incentive Rebate Amount Tariff is based on the "Renewable Market Adjusting Tariff" Provider California Public Utilities Commission '''''Note: The California general feed-in tariff was amended by [http://leginfo.ca.gov/pub/09-10/bill/sen/sb_0001-0050/sb_32_bill_2009091... SB 32] of 2009 and [http://www.leginfo.ca.gov/pub/11-12/bill/sen/sb_0001-0050/sbx1_2_bill_20... SBX1-2] of 2011. The California Public Utilities Commission (CPUC)

140

Blog Feed: Vehicles | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Blog Feed: Vehicles Blog Feed: Vehicles Blog Feed: Vehicles RSS September 11, 2013 Dr. Michael Knotek, Deputy Undersecretary for Science and Energy at the Energy Department, delivers remarks at the NASCAR Green Summit in Chicago, where the DOE-NASCAR MOU was announced. | Photo courtesy of NASCAR. New DOE-NASCAR Partnership Revs Deployment of Pollution Reducing Technologies From the electricity that powers race-day broadcasts to the fuel in the cars themselves, a new DOE-NASCAR Memorandum of Understanding pinpoints transformative energy technologies that will benefit NASCAR and its fans. September 4, 2013 Dr. Ping Liu of ARPA-E discusses the RANGE program and its innovative approach to energy storage for electric vehicles. | Photo courtesy of ARPA-E. ARPA-E Program Takes an Innovative Approach to Electric Vehicle Batteries

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Blog Feed: Vehicles | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy.gov » Blog Feed: Vehicles Energy.gov » Blog Feed: Vehicles Blog Feed: Vehicles RSS January 9, 2014 Join us on Thursday, January 16, at 2 p.m. ET for a Google+ Hangout on Energy 101: Fuel Cells. | Graphic by Sarah Gerrity, Energy Department. Live Discussion on Energy 101: Fuel Cells Join us for a Google+ Hangout on Energy 101: Fuel Cells to learn everything you need to know about fuel cells. January 6, 2014 The Clean Energy Economy in Three Charts Over the last five years, American inventors and investors have made significant progress in developing and deploying key clean energy technologies -- supported by Energy Department policies. January 3, 2014 Our Best Energy Videos of 2013 Check out our best videos from 2013 -- from Secretary Moniz's first day on the job, to the rivalry between Edison and Tesla, to a visit to a

142

World Resources Institute Feed | Open Energy Information  

Open Energy Info (EERE)

World Resources Institute Feed World Resources Institute Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

143

The relationship between residual feed intake and feeding behavior in growing heifers  

E-Print Network (OSTI)

The objective of this study was to determine if feeding behavior traits are correlated with performance and feed efficiency traits in growing heifers. Individual dry matter intake (DMI) was measured in Brangus heifers (n = 115) fed a roughage-based diet (ME = 2.1 Mcal/kg) for 70 d using Calan gate feeders (6 heifers/pen). Residual feed intake (RFI) was computed as the residuals from linear regression of DMI on mid-test BW0.75 and average daily gain (ADG). Heifers with the highest (n = 18) and lowest (n = 18) RFI were identified for feeding behavior measurements. During days 28 through 56 of the 70-d feeding trial, continuous video recordings were obtained for all heifers. Video images of two sets of four 24-h periods, two weeks apart, were analyzed for the focal animals. All occurrences of feeding were timed and counted per day, and the eight 24-h periods averaged to derive the overall feeding event (FE) and meal duration and frequency for each focal heifer. Total feeding event duration was defined as the total min per day the animals head was down in the feed bunk. A meal included all visits an animal made to the feed bunk that were separated by less than 5 min. The mean RFI values for the low and high RFI heifers were (mean SE) - 1.03 and 1.00 0.03 kg/d, respectively. Low RFI heifers consumed 21.9% less (P < 0.0001) DMI, but had similar BW and ADG compared to high RFI heifers. Heifers with low RFI spent more time (P < 0.0001) eating (152 vs 124 4.26 min/d) at a lower eating rate (62.8 vs 99.6 3.28 g/min), but had similar FE frequencies compared to high RFI heifers. Feeding event duration was negatively correlated with RFI while FE frequency and FE eating rate were positively correlated with RFI. However, meal duration and frequency were not correlated with RFI. Therefore, measuring FE characteristics could prove more useful than analyzing meals when trying to predict RFI. Additionally, eating rate appeared to be more closely related to RFI than any of the other feeding behavior traits measured.

Bingham, Glenda Marie

2007-08-01T23:59:59.000Z

144

NON-BLOCKING STABILIZED FEED BACK AMPLIFIER  

DOE Patents (OSTI)

A plural stuge nonblocking degenerative feed-back amplifier was designed particularly suitable for counting circuits because of the stability and linearity in operation, characterized by the fact that the inltial stage employs a cathode coupled input circuit fed from a cathode follower and the final stage has a tline constant greater than those of the other stages.

Fairstein, E.

1960-03-01T23:59:59.000Z

145

Staying aware of relevant feeds in context  

Science Conference Proceedings (OSTI)

To stay aware of relevant information and avoid productivity loss, a developer has to continuously read through new incoming information. Our approach supports the integration of dynamic and static information in a development environment that allows ... Keywords: feeds, human-centric software engineering

Thomas Fritz

2010-05-01T23:59:59.000Z

146

Injectivity Testing for Vapour Dominated Feed Zones  

DOE Green Energy (OSTI)

Wells with vapor dominated feed zones yield abnormal pressure data. This is caused by the condensation of vapor during water injection. A revised injectivity test procedure currently applied by PNOC at the Leyte Geothermal Power Project has improved the injectivity test results.

Clotworthy, A.W.; Hingoyon, C.S.

1995-01-01T23:59:59.000Z

147

Feed-Pump Hydraulic Performance and Design Improvement, Phase I:  

Office of Scientific and Technical Information (OSTI)

Feed-Pump Hydraulic Performance Feed-Pump Hydraulic Performance and Design Improvement, Phase I: J2esearch Program Design Volume 2 EPRI EPRI CS-2323 Volume 2 Project 1884-6 Final Report March 1982 Keywords: Feed Pumps Feed Pump Reliability Feed Pump Hydraulics Feed Pump Design Feed Pump Research Feed Pump Specifications Prepared by Borg-Warner Corporation (Byron Jackson Pump Division and Borg-Warner Research Center) Carson, California and Massa^ f Technology Cambri__ . s ,-T. a a *a_^"nt.- ji^, w « ' jm.m ^j.^M\MMMim^mjii'mmmjmiiiimm\i- " I E CT R I C P 0 W E R R E S E A R C H I N ST ITO T E DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees,

148

High pressure electrical insulated feed thru connector  

DOE Patents (OSTI)

A feed-thru type hermetic electrical connector including at least one connector pin feeding through an insulator block within the metallic body of the connector shell. A compression stop arrangement coaxially disposed about the insulator body is brazed to the shell, and the shoulder on the insulator block bears against this top in a compression mode, the high pressure or internal connector being at the opposite end of the shell. Seals between the pin and an internal bore at the high pressure end of the insulator block and between the insulator block and the metallic shell at the high pressure end are hermetically brazed in place, the first of these also functioning to transfer the axial compressive load without permitting appreciable shear action between the pin and insulator block.

Oeschger, Joseph E. (Palo Alto, CA); Berkeland, James E. (San Jose, CA)

1979-11-13T23:59:59.000Z

149

Pumped oil feed systems for rotary vacuum pumps  

Science Conference Proceedings (OSTI)

Pumped oil feed systems developed by the authors and their colleagues provide positive lubrication under all inlet pressure conditions

H. Wycliffe; B. D. Power

1981-01-01T23:59:59.000Z

150

Microscopic Analysis of Agriculture Products, 4th EditionChapter 5 Detecting Animal Products in Feeds and Feed Ingredients  

Science Conference Proceedings (OSTI)

Microscopic Analysis of Agriculture Products, 4th Edition Chapter 5 Detecting Animal Products in Feeds and Feed Ingredients Methods and Analyses eChapters Methods - Analyses Books Press Downloadable pdf of Chapter

151

EA-1790: DOE Notice of Availability of the Draft Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Notice of Availability of the Draft Environmental Assessment EA-1790: DOE Notice of Availability of the Draft Environmental Assessment Heterogeneous Feed Biorefinery Pontotoc,...

152

2013 Feds Feed Families: Your Generosity Counts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

013 Feds Feed Families: Your Generosity Counts 013 Feds Feed Families: Your Generosity Counts 2013 Feds Feed Families: Your Generosity Counts July 2, 2013 - 5:58pm Addthis (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. Fletcher Honemond Fletcher Honemond

153

2013 Feds Feed Families: Your Generosity Counts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2013 Feds Feed Families: Your Generosity Counts 2013 Feds Feed Families: Your Generosity Counts 2013 Feds Feed Families: Your Generosity Counts July 2, 2013 - 5:58pm Addthis (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. (L to R) Kevin Knobloch, DOE Chief of Staff; Fletcher Honemond, Chief Learning Officer; Doug Keeler, Feds Feeds Families National Program Manager; Ella Daniels of the Capital Area Food Bank; Jennifer Hirschorn; Rauland Sharp, 2013 Feds Feeds Families Deputy Champion. | Photo courtesy of Ella Daniels. Fletcher Honemond Fletcher Honemond

154

Global Feed-in Tariffs Project | Open Energy Information  

Open Energy Info (EERE)

Global Feed-in Tariffs Project Global Feed-in Tariffs Project Jump to: navigation, search Tool Summary Name: Global Feed-in Tariffs Project Agency/Company /Organization: World Future Council Sector: Energy Focus Area: Energy Efficiency, Renewable Energy Topics: Finance, Market analysis, Policies/deployment programs Resource Type: Workshop, Publications, Guide/manual, Training materials, Lessons learned/best practices Website: www.worldfuturecouncil.org/arguing_fits.html References: WFC's Global Feed-in Tariffs Project [1] The WFC's Global Feed-in Tariffs Project website includes links to publications, a guide for policy makers, a FIT design website and upcoming workshops and events. References ↑ "WFC's Global Feed-in Tariffs Project" Retrieved from "http://en.openei.org/w/index.php?title=Global_Feed-in_Tariffs_Project&oldid=383252

155

RSS and Podcast News Feeds | OSTI, US Dept of Energy, Office of Scientific  

Office of Scientific and Technical Information (OSTI)

RSS and Podcast News Feeds RSS and Podcast News Feeds Use OSTI's RSS/Podcast feeds to Get OSTI news, announcements, and product or service updates delivered directly to your desktop or MP3 player. Subscribe to OSTI RSS News and Podcast Feeds: Copy and paste the appropriate URL in your feed reader OSTI News Feed OSTI News Feed http://www.osti.gov/home/sites/www.osti.gov.home/files/imported/newsfeeds/rss-osti.xml OSTI News Feed OSTI Blog News Feed http://www.osti.gov/ostiblog/home/feed/entries/rss DOePatents News Feed DOepatents News Feeds http://www.osti.gov/includes/doepatents/patents.xml DOE R&D Accomplishments News Feed DOE R&D Accomplishments News Feeds http://www.osti.gov/accomplishments/newsfeeds/rss.xml OSTI's Podcast News Feed OSTI's Podcast News Feeds http://www.osti.govhome/sites/www.osti.gov.home/files/imported/newsfeeds/podcasts/ostipodcast.xml

156

Waste heat boiler with feed mixing nozzle  

SciTech Connect

A waste heat boiler of the type which is particularly suited for use in marine applications and which incorporates a feed mixing nozzle that is operative for purposes of effecting, by utilizing steam taken from the steam generating bank, a preheating of the feedwater that is fed to the steam drum. In addition to the aforesaid feed mixing nozzle, the subject waste heat boiler includes a feedwater control valve, a steam drum, a circulation pump, a steam generating bank and a centrifugal water separator. The feedwater control valve is employed to modulate the flow rate of the incoming feedwater in order to maintain the desired level of water in the steam drum. In turn the latter steam drum is intended to function in the manner of a reservoir for the circulating water that through the operation of the circulating pump is supplied to the steam generating bank. The circulating water which is supplied to the steam generating bank is heated therein to saturation temperature, and steam is generated thus. A water-steam mixture is returned from the steam generating bank to the steam drum and is directed into the centrifugal water separator that is suitably located within the steam drum. It is in the centrifugal water separator that the separation of the water-steam mixture is effected such that water is returned to the lower portion of the steam drum and the steam is supplied to the upper portion of the steam drum. The preheating of the feedwater is accomplished by directing the incoming feedwater through an internal feed pipe to the mixing nozzle, the latter being positioned in the line through which the water-steam mixture is returned to the steam drum.

Mastronarde, Th.P.

1984-05-01T23:59:59.000Z

157

Fuel cell with electrolyte feed system  

DOE Patents (OSTI)

A fuel cell having a pair of electrodes at the sites of electrochemical reactions of hydrogen and oxygen and a phosphoric acid electrolyte provided with an electrolyte supporting structure in the form of a laminated matrix assembly disposed between the electrodes. The matrix assembly is formed of a central layer disposed between two outer layers, each being permeable to the flow of the electrolyte. The central layer is provided with relatively large pores while the outer layers are provided with relatively small pores. An external reservoir supplies electrolyte via a feed means to the central layer to compensate for changes in electrolyte volume in the matrix assembly during the operation of fuel cell.

Feigenbaum, Haim (Highland Park, NJ)

1984-01-01T23:59:59.000Z

158

Continuous multi-phase feeding of broiler chickens  

E-Print Network (OSTI)

Continuous multi-phase feeding of broiler chickens was evaluated to optimize broiler nutrition and minimize environmental impact related to excess nitrogen in poultry manure. Four experiments were conducted. Experiments 1 and 2 studied effects of continuous multi-phase feeding during a 3-week starting period using battery brooders while experiments 3 and 4 evaluated multi-phase feeding during a traditional 7-week growing period using both battery brooders and floor pens. In the first and second experiments, the nutrient content of the multi-phase diets was changed every 24 hours in comparison to single-phase feeding. Results indicated that during the starter period, continuous multi-phase feeding had no significant influence on feed consumption, daily gain, feed to gain ratio or fecal nitrogen. In the third and fourth experiments, a four phase industry type broiler feeding program was compared to intensive multi-phase feeding programs created by linearly blending three different diets based on typical industry nutrient values and a commercial nutrient modeling computer program (EFG Natal). In both intensive multi-phase feeding programs, the diets were changed every three days over a 7-week growth period. Broilers in experiment 3 were raised in Petersime battery brooders to primarily access nitrogen balance while birds in experiment 4 were raised in a floor pen on pine shaving litter to resemble commercial broiler production. The results indicated that intensive multi-phase feeding improved body weight gain and feed to gain ratio only in weeks 5 and 6 but not during the overall 7-week period. Nitrogen excretion and nitrogen retention were unaffected by the intensive multi-phase feeding systems. Economic analysis indicated that intensive multi-phase feeding programs could potentially lower feed costs per kilogram of gain. However, the high cost of implementing a continuous multi-phase feeding system may not justify the relatively small gain in lower feed cost per kilogram of gain. In conclusion, continuous multi-phase feeding of broiler chickens using corn-soy diets does not appear to be justified by either increased performance or reduced nitrogen excretion.

Nasril

2003-12-01T23:59:59.000Z

159

B Plant ion exchange feed line leak  

SciTech Connect

>One of the objectives of the Waste Management Program is to separate the long-lived heat emitter /aup 137/Cs from the bulk of the high-level Iiquid wastes. This separation is accomplished by the ion exchange process in the 221-B Building. Interim storage of the cesium is in solution as a nitrate. The feed for the B Plant cesinm ion exchange process is pumped from the lag storage tank, 105-C, through a pipeline and several diversion boxes to the 221-B Building. On December 19, 1969, a leak was discovered near the 241-C-152 diversion box in the section of this line, V-122, from the 105-C tank. Although the leak represented a loss of feed for the processing of /sup 137/Cs, more important was the consequence of environmental contmination to the soil from the line leak. For this reason, an investigation was made to estblish the extent of the radioactivity spread. The results of a well drilling operation undertaken to define the boundary and to estimate the extent of the leak are summarized. (CR)

Tanaka, K.H.

1971-01-25T23:59:59.000Z

160

RSS Feeds | U.S. DOE Office of Science (SC)  

NLE Websites -- All DOE Office Websites (Extended Search)

RSS Feeds RSS Feeds RSS Feeds Open Funding Opportunity Announcements (FOAs) Open DOE National Laboratory Announcements Discovery & Innovation News EFRC News & Events Jobs Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 Print Text Size: A A A RSS Feeds FeedbackShare Page Open Funding Opportunity Announcements (FOAs) ASCR Open Funding Opportunities BES Open Funding Opportunities BER Open Funding Opportunities FES Open Funding Opportunities HEP Open Funding Opportunities NP Open Funding Opportunities Open DOE National Laboratory Announcements Discovery & Innovation Stories of Discovery & Innovation Brief Science Highlights Laboratory Science Highlights User Facility Science Highlights

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Influence of Feeding Flow and Shrinkage Pipe Formation on ...  

Science Conference Proceedings (OSTI)

Presentation Title, Influence of Feeding Flow and Shrinkage Pipe Formation on ... CFDBased Modelling on Interfacial Heat Transfer for Water Quenching.

162

NNSA Production Office tops Feds Feed Families campaign goal...  

NLE Websites -- All DOE Office Websites (Extended Search)

NNSA Production Office tops ... NNSA Production Office tops Feds Feed Families campaign goal Posted: September 16, 2013 - 9:45am Oak Ridge, Tenn. - Employees of the National...

163

Feeding and growth of polar cod in fjords of Svalbard.  

E-Print Network (OSTI)

??Polar cod (Boreogadus saida) were collected in two different fjords around Svalbard in 2006 to address their feeding ecology and growth. Kongsfjorden was sampled in (more)

Johannessen, Leif Sindre

2007-01-01T23:59:59.000Z

164

static.nvd.nist.gov - /feeds/xml/cpe/dictionary/  

Science Conference Proceedings (OSTI)

static.nvd.nist.gov - /feeds/xml/cpe/dictionary/. [To Parent Directory] 3/1/2013 1:27 AM 17303838 official-cpe-dictionary_v2 ...

165

Impact of ethanol expansion on the cattle feeding industry.  

E-Print Network (OSTI)

??The U.S. has a history of producing surplus corn, but the current and projected growth in ethanol production combined with strong feed and export demand (more)

Daley, Erin

2007-01-01T23:59:59.000Z

166

RSS Feeds for Specific Tropical Cyclones of the North Atlantic...  

NLE Websites -- All DOE Office Websites (Extended Search)

RSS Feeds for Specific Tropical Cyclones of the North Atlantic, Caribbean Sea, and Gulf of Mexico (English) Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS...

167

Hazard Evaluation for Waste Feed Delivery Operations and Activities  

Science Conference Proceedings (OSTI)

This document contains the results of the hazard analysis that has been performed to address Waste Feed Delivery operations and activities.

RYAN, G.W.

2000-03-10T23:59:59.000Z

168

EFFECT OF FEEDING A BLEND OF NATURALLY-CONTAMINATED CORN ON NUTRIENT DIGESTIBILITY AND FEED PREFERENCE IN WEANLING PIGS.  

E-Print Network (OSTI)

??Two experiments were conducted to determine the effect of feeding diets with a 2009 and 2010 naturally-contaminated corn to weaning pigs. For both experiments three (more)

Escobar, Carlos Santiago

2012-01-01T23:59:59.000Z

169

Apparatus and method for feeding coal into a coal gasifier  

DOE Patents (OSTI)

This invention is directed to a system for feeding coal into a gasifier operating at high pressures. A coal-water slurry is pumped to the desired pressure and then the coal is "dried" prior to feeding the coal into the gasifier by contacting the slurry with superheated steam in an entrained bed dryer for vaporizing the water in the slurry.

Bissett, Larry A. (Morgantown, WV); Friggens, Gary R. (Morgantown, WV); McGee, James P. (Morgantown, WV)

1979-01-01T23:59:59.000Z

170

A FEED SCREW POWDER SEAL FOR THE REACTOR TOWER  

SciTech Connect

The two-way sealing of a feed screw for a fine powder corveyer is accomplished with a split gland. One end is externally threaded to receive the gland nut and the other end is flanged for bolting to a feed-screw housing. The correct installation of the gland is discussed. (C.J.G.)

Collier, M.

1959-11-26T23:59:59.000Z

171

Feds Feed Families campaign underway | National Nuclear Security  

National Nuclear Security Administration (NNSA)

Feds Feed Families campaign underway | National Nuclear Security Feds Feed Families campaign underway | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > Feds Feed Families campaign underway Feds Feed Families campaign underway Posted By Office of Public Affairs An event featuring live music, a dunk tank and a barbeque was held yesterday as part of the 2012 Feds Feed Families campaign. The DOE-wide

172

Bangladesh-Feed the Future | Open Energy Information  

Open Energy Info (EERE)

Bangladesh-Feed the Future Bangladesh-Feed the Future Jump to: navigation, search Name Bangladesh-Feed the Future Agency/Company /Organization United States Agency for International Development Sector Land Focus Area Agriculture Topics Implementation, Policies/deployment programs, Pathways analysis, Background analysis Resource Type Publications Website http://www.usaid.gov/our_work/ Country Bangladesh Southern Asia References Bangladesh-Feed the Future (FY10)[1] Overview "The Feed the Future (FTF) FY 2010 implementation plans are working documents outlining U.S. government planning for the first year of the Global Hunger and Food Security Initiative. These plans represent a transition towards the development of multiyear strategies and are targeted at investments that lay the foundation for a new country-level and

173

Feed Materials Production Center Waste Management Plan  

SciTech Connect

In the process of producing uranium metal products used in Department of Energy (DOE) defense programs at other DOE facilities, various types of wastes are generated at the Feed Materials Production Center (FMPC). Process wastes, both generated and stored, are discussed in the Waste Management Plan and include low-level radioactive waste (LLW), mixed hazardous/radioactive waste, and sanitary/industrial waste. Scrap metal waste and wastes requiring special remediation are also addressed in the Plan. The Waste Management Plan identifies the comprehensive programs developed to address safe storage and disposition of all wastes from past, present, and future operations at the FMPC. Waste streams discussed in this Plan are representative of the waste generated and waste types that concern worker and public health and safety. Budgets and schedules for implementation of waste disposition are also addressed. The waste streams receiving the largest amount of funding include LLW approved for shipment by DOE/ORO to the Nevada Test Site (NTS) (MgF/sub 2/, slag leach filter cake, and neutralized raffinate); remedial action wastes (waste pits, K-65 silo waste); thorium; scrap metal (contaminated and noncontaminated ferrous and copper scrap); construction rubble and soil generated from decontamination and decommissioning of outdated facilities; and low-level wastes that will be handled through the Low-Level Waste Processing and Shipping System (LLWPSS). Waste Management milestones are also provided. The Waste Management Plan is divided into eight major sections: Introduction; Site Waste and Waste Generating Process; Strategy; Projects and Operations; Waste Stream Budgets; Milestones; Quality Assurance for Waste Management; and Environmental Monitoring Program.

Watts, R.E.; Allen, T.; Castle, S.A.; Hopper, J.P.; Oelrich, R.L.

1986-12-31T23:59:59.000Z

174

German Agency for International Cooperation (GIZ) Feed | Open Energy  

Open Energy Info (EERE)

Cooperation (GIZ) Feed Cooperation (GIZ) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

175

UNEP-Risoe Centre Feed | Open Energy Information  

Open Energy Info (EERE)

Centre Feed Centre Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

176

Corn fiber hulls as a food additive or animal feed  

DOE Patents (OSTI)

The present invention provides a novel animal feed or food additive that may be made from thermochemically hydrolyzed, solvent-extracted corn fiber hulls. The animal feed or food additive may be made, for instance, by thermochemically treating corn fiber hulls to hydrolyze and solubilize the hemicellulose and starch present in the corn fiber hulls to oligosaccharides. The residue may be extracted with a solvent to separate the oil from the corn fiber, leaving a solid residue that may be prepared, for instance by aggolmerating, and sold as a food additive or an animal feed.

Abbas, Charles (Champaign, IL); Beery, Kyle E. (Decatur, IN); Cecava, Michael J. (Decatur, IN); Doane, Perry H. (Decatur, IN)

2010-12-21T23:59:59.000Z

177

Mitigation Action Implementation Network (MAIN) Feed | Open Energy  

Open Energy Info (EERE)

Mitigation Action Implementation Network (MAIN) Feed Mitigation Action Implementation Network (MAIN) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ)

178

Coal-CO2 Slurry Feeding System for Pressurized Gasifiers  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed Systems Feed Systems Coal-CO2 Slurry Feeding System for Pressurized Gasifiers Massachusetts Institute of Technology Project Number: FE0012500 Project Description This project will develop and assess a slurry feeding system based on a suspension of coal in liquid CO2 that can be pumped into a high-pressure gasifier. The advantages of this solution are that CO2 has a low heat capacity, a low heat of vaporization and low viscosity. Thus, the liquid CO2 imposes a much smaller thermal load on the gasifier relative to a water slurry, and has the potential to improve the efficiency and economics of integrated gasification combined cycle (IGCC) power plants with carbon capture and dramatically reduce greenhouse gas emissions from coal fired power plants. Project Details

179

The DOE Feeds Families Festival | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The DOE Feeds Families Festival The DOE Feeds Families Festival The DOE Feeds Families Festival July 27, 2010 - 5:50pm Addthis Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs Today, Department of Energy employees took a moment to give back to the Washington, D.C. community by holding our first "DOE Feeds Families Festival" outside of the Forrestal Building. Highlights from the event included a dunk tank for some of DOE's top officials (featuring NNSA Administrator Thomas D'Agostino, DOE Chief Human Capital Officer Michael Kane, and Senior Advisor Matt Rogers), and OPM Director, John Berry, to name a few. Additionally, Deputy Secretary Daniel Poneman and his band "Yellowcake" graced the stage for a rock concert, featuring covers of popular classic rock songs.

180

NNSA Production Office tops Feds Feed Families campaign goal | National  

NLE Websites -- All DOE Office Websites (Extended Search)

Production Office tops Feds Feed Families campaign goal | National Production Office tops Feds Feed Families campaign goal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > NNSA Production Office tops Feds Feed Families ... NNSA Production Office tops Feds Feed Families campaign goal Posted By Office of Public Affairs Employees of the NNSA Production Office (NPO) have donated 17,348 pounds of

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Feed-in Tariff Program (Ontario, Canada) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feed-in Tariff Program (Ontario, Canada) Feed-in Tariff Program (Ontario, Canada) Feed-in Tariff Program (Ontario, Canada) < Back Eligibility Commercial Agricultural Industrial Residential Installer/Contractor Tribal Government Low-Income Residential Schools Institutional Multi-Family Residential Nonprofit Savings Category Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Ontario Program Type Performance-Based Incentive The Feed-in Tariff (FIT) Program is a guaranteed funding structure that combines stable, competitive prices and long-term contracts for energy generated using renewable resources. Homeowners, business owners and private developers may apply to the FIT Program if they use one or more forms of renewable energy, including wind, waterpower, biomass and biogas,

182

Time phased alternate blending of feed coals for liquefaction  

DOE Patents (OSTI)

The present invention is directed to a method for reducing process performance excursions during feed coal or process solvent changeover in a coal hydroliquefaction process by blending of feedstocks or solvents over time. ,

Schweigharett, Frank (Allentown, PA); Hoover, David S. (New Tripoli, PA); Garg, Diwaker (Macungie, PA)

1985-01-01T23:59:59.000Z

183

Production and Handling Slide 27: Feed Cylinder with Normal Assay...  

NLE Websites -- All DOE Office Websites (Extended Search)

Normal Assay (0.711%U) Arriving at Plant Refer to caption below for image description The enrichment process begins with "feed material," natural uranium that contains 0.711%...

184

Community Feed-in Tariff (Nova Scotia, Canada)  

Energy.gov (U.S. Department of Energy (DOE))

The Community Feed-In Tariff Program (COMFIT) is designed to increase local ownership of small-scale energy projects in Nova Scotia. The program provides an opportunity for community-based power...

185

NNSA Administrator Kicks Off DOE's 'Feds Feed Families' Campaign |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kicks Off DOE's 'Feds Feed Families' Campaign Kicks Off DOE's 'Feds Feed Families' Campaign NNSA Administrator Kicks Off DOE's 'Feds Feed Families' Campaign June 16, 2011 - 12:00am Addthis WASHINGTON, D.C. - National Nuclear Security Administration (NNSA) Administrator Thomas P. D'Agostino today helped the Department of Energy (DOE) kick off its third annual "Feds Feed Families" campaign to assist local food banks in replenishing supplies during the summer months. DOE and NNSA, in partnership with the Office of Personnel Management (OPM) and other Federal agencies are participating in the nationwide effort to raise 2 million pounds of non-perishable food items for food banks across the country. Administrator D'Agostino and DOE's Chief Human Capital Officer Mike Kane once again serve as DOE campaign co-chairs.

186

USDA - Biorefinery Assistance Program | Open Energy Information  

Open Energy Info (EERE)

of the production must be an advanced biofuels Eligible advanced biofuels include: Biofuel derived from cellulose, hemicellulose, or lignin, or other fuels derived from...

187

Sandia National Laboratories Trojan Horse Project: Biorefinery ...  

bio-processing system Laura Santos | 925.294.1214 | lesanto@sandia.gov BENEFITS Significant reduction in the cost and complexity of the processes to ...

188

Technoeconomic analysis of a lignocellulosic ethanol biorefinery ...  

poplar wood. Biotechnol Progr 25(2):323332 (2009). 6. Zhao X, Cheng K and Liu D, Organosolv pre-treatment of lignocellulosic biomass for enzymatic hydrolysis.

189

Production of levulinic acid in urban biorefineries  

E-Print Network (OSTI)

The energy security of the United States depends, most experts agree, on the development of substitute sources of energy for the transportation sector, which accounts for over 93% of the nation's petroleum consumption. ...

Sheldon-Coulson, Garth Alexander

2011-01-01T23:59:59.000Z

190

Platform Chemicals from an Oilseed Biorefinery  

Science Conference Proceedings (OSTI)

The US chemical industry is $460 billion in size where a $150 billion segment of which is non-oxygenated chemicals that is sourced today via petroleum but is addressable by a renewable feedstock if one considers a more chemically reduced feedstock such as vegetable oils. Vegetable oil, due to its chemical functionality, provides a largely untapped opportunity as a renewable chemical source to replace petroleum-derived chemicals and produce platform chemicals unavailable today. This project examined the fertile intersection between the rich building blocks provided by vegetable oils and the enhanced chemical modification capability provided by metathesis chemistry. The technology advanced in this study is the process of ethylene cross-metathesis (referred to as ethenolysis) with vegetable oil and vegetable oil derivatives to manufacture the platform-chemical 9-decenoic acid (or 9DA) and olefin co-products. The project team meet its goals of demonstrating improved catalyst efficiencies of several multiples, deepening the mechanistic understanding of metathesis, synthesis and screening of dozens of new catalysts, designing and modeling commercial processes, and estimating production costs. One demonstrable result of the study was a step change improvement in catalyst turnover number in the ethenolysis of methyl oleate as reported here. We met our key measurable of producing 100 lbs of 9DA at the pilot-scale, which demonstrated ability to scale-up ethenolysis. DOE Project funding had significant positive impact on development of metathetically modified vegetable oils more broadly as the Cargill/Materia partnership, that was able to initiate primarily due to DOE funding, has succeeded in commercializing products, validating metathesis as a platform technology, and expanding a diverse products portfolio in high value and in large volume markets. Opportunities have expanded and business development has gained considerable momentum and enabled further expansion of the Materia/Cargill relationship. This project exceeded expectations and is having immediate impact on DOE success by replacing petroleum products with renewables in a large volume application today.

Tupy, Mike; Schrodi Yann

2006-11-06T23:59:59.000Z

191

NREL: Biomass Research - Capabilities in Integrated Biorefinery...  

NLE Websites -- All DOE Office Websites (Extended Search)

pilot plant, researchers study biochemical processes for converting lignocellulosic biomass to ethanol. At NREL, teams of researchers focus on developing an integrated...

192

NREL: Biomass Research - Integrated Biorefinery Research Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

pilot plant accommodates bench-to-pilot-scale processes for converting cellulosic biomass into a variety of fuels and chemicals at process throughputs of up to one ton of dry...

193

Range Fuels Biorefinery Groundbreaking | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

about 30 million gallons of biofuels and chemicals. As someone who trained to be a chemical engineer, and who later found himself running a chemical company, I can tell you...

194

Multitasking mesoporous nanomaterials for biorefinery applications  

DOE Green Energy (OSTI)

The incorporation of a different organic functional group into MSN provides a selective adsorbent for separation and purification of ?-tocopherol from microalgae oil. The functional group with electron deficient aromatic rings demonstrated high sequestration capacity and selectivity of {alpha}-tocopherol.

Kandel, Kapil [Ames Laboratory

2013-05-02T23:59:59.000Z

195

On the systematic synthesis of sustainable biorefineries  

E-Print Network (OSTI)

raw materials or third generation, biofuels based on algae.l-3 However, there are also concerns. #12;6 Figure 1.-Raw materials and technologies for production of biofuels Nowadays, the increasing the use of raw material, energy and water in order for the process not only to be economically feasible

Grossmann, Ignacio E.

196

Systematic synthesis of sustainable biorefineries: A review  

E-Print Network (OSTI)

of pollutants, oxygen generation, and intermediate-temperature solid oxide fuel cells, as well as catalytic reforming. Sekine et al.56 investigated four catalytic reactions assisted with an electric field to promote

Grossmann, Ignacio E.

197

Pig feed prices in the E.E.C. H. MAROUBY, J.VANDERHAEGEN D. DARIDAN  

E-Print Network (OSTI)

Pig feed prices in the E.E.C. H. MAROUBY, J.VANDERHAEGEN D. DARIDAN LT.P., 34, boulevard de la Gare, 31500 Toulouse France The behaviour of pig feed prices determines to a great extent the profitability of the branch and in the overall trends of pig feed prices. Since 1975, the penetration rate of pig feed tends

Recanati, Catherine

198

Texas Bentonites as Amendments of Aflatoxin-Contaminated Poultry Feed  

E-Print Network (OSTI)

Aflatoxins are toxic organic compounds produced by fungi in grains. Moderately contaminated grains that cannot be used as food are often directed to animal feed. Economically-feasible detoxification measures for contaminated feeds are needed. The objectives of this research were to identify effective bentonites as aflatoxin adsorbents and to evaluate the performance of the clays as aflatoxin amendments in feed for broiler chickens. Five bentonite samples from Gonzales, Texas, USA were collected and analyzed against the published selection criteria for aflatoxin adsorbents: aflatoxin adsorption capacity, pH, cation exchange capacity (CEC), organic carbon, particle size distribution, and mineralogical and structural compositions. Two bentonites were identified as potentially good aflatoxin adsorbents based on the analyses. These two bentonites were selected for an in vivo poultry experiment where chickens were fed with aflatoxin-contaminated corn (1400 ppb) to test the detoxification efficacy of the clays. Detailed mineralogy analyses were conducted on these two samples (4TX and 1TX) after size fractionation. Clay 4TX and 1TX contained 87 percent and 65 percent clay, respectively. Smectite was the dominant mineral phase in both clay fractions. Quartz and feldspars were also present in both samples. These minerals are unlikely to cause harmful effects on the chickens. The presence of pyrite and heavy metals in 1TX raised concerns about its use in animal feed. The clays were introduced into feed by mixing the dry bentonite powder with the feed for twelve minutes in a mechanical mixer. The body weight was increased by 21 percent with clay 4TX and 14 percent with clay 1TX in the aflatoxin diet. The concentration of total aflatoxins in liver was reduced by 36 percent with the addition of clays. Liver visual appearance was also improved from pale red to a more reddish color resembling the healthy red liver. All chickens fed clean feed had significantly higher body weights than those fed with highly contaminated feed, suggesting that the clays did not completely eliminate aflatoxin toxicity. The published aflatoxin binder selection criteria were useful for screening bentonites as aflatoxin amendments. The selected bentonites based on the criteria could effectively sequester aflatoxins in vivo. Yet direct mixing of bentonite as dry powder to highly contaminated poultry feed could not eliminate the toxicity of aflatoxins.

Barrientos Velazquez, Ana Luisa

2011-05-01T23:59:59.000Z

199

High Level Waste Feed Certification in Hanford Double Shell Tanks  

SciTech Connect

The ability to effectively mix, sample, certify, and deliver consistent batches of High Level Waste (HLW) feed from the Hanford Double Shell Tanks (DST) to the Waste Treatment and Immobilization Plant (WTP) presents a significant mission risk with potential to impact mission length and the quantity of HLW glass produced. DOEs River Protection Project (RPP) mission modeling and WTP facility modeling assume that individual 3785 cubic meter (1 million gallon) HLW feed tanks are homogenously mixed, representatively sampled, and consistently delivered to the WTP. It has been demonstrated that homogenous mixing of HLW sludge in Hanford DSTs is not likely achievable with the baseline design thereby causing representative sampling and consistent feed delivery to be more difficult. Inconsistent feed to the WTP could cause additional batch to batch operational adjustments that reduces operating efficiency and has the potential to increase the overall mission length. The Hanford mixing and sampling demonstration program will identify DST mixing performance capability, will evaluate representative sampling techniques, and will estimate feed batch consistency. An evaluation of demonstration program results will identify potential mission improvement considerations that will help ensure successful mission completion. This paper will discuss the history, progress, and future activities that will define and mitigate the mission risk.

Thien, Micheal G.; Wells, Beric E.; Adamson, Duane J.

2010-03-01T23:59:59.000Z

200

RSS Feeds - U.S. Energy Information Administration (EIA)  

U.S. Energy Information Administration (EIA) Indexed Site

RSS Feeds RSS Feeds Subscribe to EIA's RSS Feeds Subscribe RSS Today in Energy Short, timely articles with graphics on energy facts, issues, and trends. RSS What's New Notification of new EIA products as they are released. RSS EIA Radio Provides free short broadcast stories on EIA energy data reports and analysis to radio stations nationwide. RSS Press Releases Receive EIA press releases RSS Energy in Brief Articles that explain important energy topics in plain language. Each Brief answers a question relevant to the public and recommends resources for further reading. RSS Gasoline & Diesel Fuel Update Retail gasoline and on-highway diesel fuel prices are usually updated each Monday by 5:00 pm EST. RSS This Week in Petroleum Weekly prices and an analytical summary of the petroleum industry.

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Organization of American States (OAS) Feed | Open Energy Information  

Open Energy Info (EERE)

Organization of American States (OAS) Feed Organization of American States (OAS) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

202

An Update on Feds Feeds Families | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

An Update on Feds Feeds Families An Update on Feds Feeds Families An Update on Feds Feeds Families November 19, 2012 - 5:32pm Addthis As a result of DOE employee efforts, the Energy Department received an award from OPM for donating the highest amount of non-perishable food items within the “small agency” category of Federal agencies participating in this year’s Campaign. | Photo courtesy of OPM. As a result of DOE employee efforts, the Energy Department received an award from OPM for donating the highest amount of non-perishable food items within the "small agency" category of Federal agencies participating in this year's Campaign. | Photo courtesy of OPM. April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs What does this mean for me?

203

Energy Research Centre of the Netherlands Feed | Open Energy Information  

Open Energy Info (EERE)

Energy Research Centre of the Netherlands Feed Energy Research Centre of the Netherlands Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

204

United Nations Industrial Development Organization Feed | Open Energy  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

205

Latin America Energy Organization Feed | Open Energy Information  

Open Energy Info (EERE)

Latin America Energy Organization Feed Latin America Energy Organization Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

206

Coalition for Rainforest Nations Feed | Open Energy Information  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

207

The Energy and Resources Institute (TERI) Feed | Open Energy Information  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

208

Climate and Development Knowledge Network (CDKN) Feed | Open Energy  

Open Energy Info (EERE)

Climate and Development Knowledge Network (CDKN) Feed Climate and Development Knowledge Network (CDKN) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ)

209

Savannah River National Laboratory Feed | Open Energy Information  

Open Energy Info (EERE)

Savannah River National Laboratory Feed Savannah River National Laboratory Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

210

National Renewable Energy Laboratory Feed | Open Energy Information  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

211

United Nations Environment Programme Feed | Open Energy Information  

Open Energy Info (EERE)

United Nations Environment Programme Feed United Nations Environment Programme Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

212

Institute of Development Studies Feed | Open Energy Information  

Open Energy Info (EERE)

Institute of Development Studies Feed Institute of Development Studies Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

213

Green Power Network - Green Power News RSS Feed  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Power News RSS Feed Green Power News RSS Feed Search Search Help More Search Options Search Site Map News TVA Seeks 126 MW of Renewables in 2014 December 2013 More News More News Subscribe to E-Mail Update Subscribe to e-mail update Events EPA Webinar - The Power of Aggregated Purchasing: How to Green Your Electricity Supply & Save Money January 15, 2014 1:00-2:00 p.m. ET Previous Webinars More News Features Green Power Market Status Report (2011 Data) Featured Green Power Reports Green Power News RSS Feed RSS, or Really Simple Syndication, is an easy way for Web site owners to post green power news onto their site, using such scripting languages as JavaScript, Perl, and PHP. Newshounds can also use an RSS reader to track green power news automatically. How do I use RSS?

214

International Institute for Sustainable Development Feed | Open Energy  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

215

Global Village Energy Partnership (GVEP) Feed | Open Energy Information  

Open Energy Info (EERE)

Global Village Energy Partnership (GVEP) Feed Global Village Energy Partnership (GVEP) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

216

Information for Development Program (infoDev) Feed | Open Energy  

Open Energy Info (EERE)

for Development Program (infoDev) Feed for Development Program (infoDev) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

217

Marin Clean Energy - Feed-In Tariff | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marin Clean Energy - Feed-In Tariff Marin Clean Energy - Feed-In Tariff Marin Clean Energy - Feed-In Tariff < Back Eligibility Commercial Fed. Government Industrial Local Government Multi-Family Residential Nonprofit Residential State Government Savings Category Bioenergy Biofuels Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Solar Home Weatherization Wind Program Info State California Program Type Performance-Based Incentive Rebate Amount Varies by technology and position in program capacity queue [http://www.leginfo.ca.gov/pub/01-02/bill/asm/ab_0101-0150/ab_117_bill_20... Assembly Bill 117], passed in 2002, allows communities in California to aggregate their load and to procure electricity from their own preferred sources. Under the authority of this law, California's first community

218

Third Generation Environmentalism (E3G) Feed | Open Energy Information  

Open Energy Info (EERE)

Generation Environmentalism (E3G) Feed Generation Environmentalism (E3G) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

219

Kumasi Institute of Technology and Environment Feed | Open Energy  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

220

German Aerospace Center (DLR)Feed | Open Energy Information  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev)

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Gainesville Regional Utilities - Solar Feed-In Tariff | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Gainesville Regional Utilities - Solar Feed-In Tariff Gainesville Regional Utilities - Solar Feed-In Tariff Gainesville Regional Utilities - Solar Feed-In Tariff < Back Eligibility Commercial Fed. Government Industrial Institutional Local Government Nonprofit Residential Schools State Government Tribal Government Savings Category Solar Buying & Making Electricity Program Info Start Date 03/01/2009 State Florida Program Type Performance-Based Incentive Rebate Amount 2013 Contracts: Rooftop- or pavement-mounted systems Ground-mounted systems Rooftop- or pavement-mounted systems >10kW to 300kW: $0.18/kWh Ground-mounted systems >10kW to 25kW: $0.18/kWh Ground-mounted systems >25kW to 1,000kW: $0.15/kWh Provider Gainesville Regional Utilities NOTE: This program will re-open to new applicants from January 4, 2013

222

Earth melter and method of disposing of feed materials  

DOE Patents (OSTI)

An apparatus, and method of operating the apparatus is described, wherein a feed material is converted into a glassified condition for subsequent use or disposal. The apparatus is particularly useful for disposal of hazardous or noxious waste materials which are otherwise either difficult or expensive to dispose of. The apparatus is preferably constructed by excavating a melt zone in a quantity of soil or rock, and lining the melt zone with a back fill material if refractory properties are needed. The feed material is fed into the melt zone and, preferably, combusted to an ash, whereupon the heat of combustion is used to melt the ash to a molten condition. Electrodes may be used to maintain the molten feed material in a molten condition, and to maintain homogeneity of the molten materials. 3 figs.

Chapman, C.C.

1994-10-11T23:59:59.000Z

223

Statistical Methods and Tools for Hanford Staged Feed Tank Sampling  

SciTech Connect

This report summarizes work conducted by Pacific Northwest National Laboratory to technically evaluate the current approach to staged feed sampling of high-level waste (HLW) sludge to meet waste acceptance criteria (WAC) for transfer from tank farms to the Hanford Waste Treatment and Immobilization Plant (WTP). The current sampling and analysis approach is detailed in the document titled Initial Data Quality Objectives for WTP Feed Acceptance Criteria, 24590-WTP-RPT-MGT-11-014, Revision 0 (Arakali et al. 2011). The goal of this current work is to evaluate and provide recommendations to support a defensible, technical and statistical basis for the staged feed sampling approach that meets WAC data quality objectives (DQOs).

Fountain, Matthew S.; Brigantic, Robert T.; Peterson, Reid A.

2013-10-01T23:59:59.000Z

224

Earth melter and method of disposing of feed materials  

DOE Patents (OSTI)

An apparatus, and method of operating the apparatus, wherein a feed material is converted into a glassified condition for subsequent use or disposal. The apparatus is particularly useful for disposal of hazardous or noxious waste materials which are otherwise either difficult or expensive to dispose of. The apparatus is preferably constructed by excavating a melt zone in a quantity of soil or rock, and lining the melt zone with a back fill material if refractory properties are needed. The feed material is fed into the melt zone and, preferably, combusted to an ash, whereupon the heat of combustion is used to melt the ash to a molten condition. Electrodes may be used to maintain the molten feed material in a molten condition, and to maintain homogeneity of the molten materials.

Chapman, Christopher C. (Richland, WA)

1994-01-01T23:59:59.000Z

225

The Children's Investment Fund Foundation Feed | Open Energy Information  

Open Energy Info (EERE)

The Children's Investment Fund Foundation Feed The Children's Investment Fund Foundation Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

226

Regional Centre for Renewable Energy and Energy Efficiency Feed | Open  

Open Energy Info (EERE)

Centre for Renewable Energy and Energy Efficiency Feed Centre for Renewable Energy and Energy Efficiency Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ)

227

Portsmouth Site Feeds Bacteria to Render Hazardous Groundwater Waste  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Portsmouth Site Feeds Bacteria to Render Hazardous Groundwater Portsmouth Site Feeds Bacteria to Render Hazardous Groundwater Waste Harmless Portsmouth Site Feeds Bacteria to Render Hazardous Groundwater Waste Harmless April 2, 2012 - 12:00pm Addthis Neil Smith puts a trained eye on the pressure and flow of a food-grade com¬pound being injected into an under¬ground plume of hazardous waste near the X-720 Maintenance Facility at the DOE Piketon Site. The sodium lactate compound promotes bacterial growth in the groundwater that turns hazardous waste into harmless end-products. Neil Smith puts a trained eye on the pressure and flow of a food-grade com¬pound being injected into an under¬ground plume of hazardous waste near the X-720 Maintenance Facility at the DOE Piketon Site. The sodium lactate compound promotes bacterial growth in the groundwater that turns

228

Renewable Energy and Energy Efficiency Partnership Feed | Open Energy  

Open Energy Info (EERE)

Renewable Energy and Energy Efficiency Partnership Feed Renewable Energy and Energy Efficiency Partnership Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ)

229

Feed Variability and Bulk Vitrification Glass Performance Assessment  

Science Conference Proceedings (OSTI)

The supplemental treatment (ST) bulk vitrification process will obtain its feed, consisting of low-activity waste (LAW), from more than one source. One purpose of this letter report is to describe the compositional variability of the feed to ST. The other is to support the M-62-08 decision by providing a preliminary assessment of the effectiveness of bulk vitrification (BV), the process that has been selected to perform supplemental treatment, in handling the ST feed envelope. Roughly nine-tenths of the ST LAW feed will come from the Waste Treatment Plant (WTP) pretreatment. This processed waste is expected to combine (1) a portion of the same LAW feed sent to the WTP melters and (2) a dilute stream that is the product of the condensate from the submerged-bed scrubber (SBS) and the drainage from the electrostatic precipitator (WESP), both of which are part of the LAW off-gas system. The manner in which the off-gas-product stream is concentrated to reduce its volume, and the way in which the excess LAW and off-gas product streams are combined, are part of the interface between WTP and ST and have not been determined. This letter report considers only one possible arrangement, in which half of the total LAW is added to the off-gas product stream, giving an estimated ST feed stream from WTP. (Total LAW equals that portion of LAW sent to the WTP LAW vitrification plant (WTP LAW) plus the LAW not currently treatable in the LAW vitrification plant due to capacity limitations (excess)).

Mahoney, Lenna A.; Vienna, John D.

2005-01-10T23:59:59.000Z

230

Fuzzy logic control of batch-feeding refuse incineration  

Science Conference Proceedings (OSTI)

The municipal solid waste (MSW) or refuse incineration plant is designated to reduce the volume of the refuse and recover energy from it. The steam generated from a boiler heated by burning refuse is sent to a turbine to generate the electricity. Batch-feeding ... Keywords: Singapore, Ulu Pandan refuse incineration plant, batch-feeding refuse incineration, boiler, boilers, combustion, complete combustion, electricity generation, energy recovery, flow control, fuzzy control, fuzzy logic control, grate rotating rates, incomplete combustion, municipal solid waste plant, rule-base fuzzy logic control algorithms, steam flow rate, steam power stations, uncertain fluctuation, waste disposal, waste-to-energy power plants

Desong Chen

1995-03-01T23:59:59.000Z

231

Tank Waste Feed Delivery System Readiness at the Hanford Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit Report Audit Report Tank Waste Feed Delivery System Readiness at the Hanford Site OAS-L-12-09 August 2012 Department of Energy Washington, DC 20585 August 23, 2012 MEMORANDUM FOR THE MANAGER, OFFICE OF RIVER PROTECTION FROM: David Sedillo, Director Western Audits Division Office of Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Audit Report on "Tank Waste Feed Delivery System Readiness at the Hanford Site" BACKGROUND The Department of Energy's largest cleanup task involves the treatment, immobilization and disposal of 56 million gallons of hazardous and highly radioactive waste at the Hanford Site, located in Southeastern Washington State. As part of this effort, the Department is constructing

232

Liquid over-feeding air conditioning system and method  

DOE Patents (OSTI)

A refrigeration air conditioning system utilizing a liquid over-feeding operation is described. A liquid refrigerant accumulator-heat exchanger is placed in the system to provide a heat exchange relationship between hot liquid refrigerant discharged from condenser and a relatively cool mixture of liquid and vaporous refrigerant discharged from the evaporator. This heat exchange relationship substantially sub-cools the hot liquid refrigerant which undergoes little or no evaporation across the expansion device and provides a liquid over-feeding operation through the evaporator for effectively using 100 percent of evaporator for cooling purposes and for providing the aforementioned mixture of liquid and vaporous refrigerant. 1 figure.

Mei, V.C.; Chen, F.C.

1993-09-21T23:59:59.000Z

233

Coal-feeding mechanism for a fluidized bed combustion chamber  

SciTech Connect

The present invention is directed to a fuel-feeding mechanism for a fluidized bed combustor. In accordance with the present invention a perforated conveyor belt is utilized in place of the fixed grid normally disposed at the lower end of the fluidized bed combustion zone. The conveyor belt is fed with fuel, e.g. coal, at one end thereof so that the air passing through the perforations dislodges the coal from the belt and feeds the coal into the fluidized zone in a substantially uniform manner.

Gall, Robert L. (Morgantown, WV)

1981-01-01T23:59:59.000Z

234

Feed Composition for Sodium-Bearing Waste Treatment Process  

SciTech Connect

Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated by a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is to complete treatment of SBW by December 31, 2012. To support both design and development studies for the SBW treatment process, detailed feed compositions are needed. This report contains the expected compositions of these feed streams and the sources and methods used in obtaining these compositions.

Barnes, C.M.

2000-10-30T23:59:59.000Z

235

Liquid over-feeding air conditioning system and method  

DOE Patents (OSTI)

A refrigeration air conditioning system utilizing a liquid over-feeding operation is described. A liquid refrigerant accumulator-heat exchanger is placed in the system to provide a heat exchange relationship between hot liquid refrigerant discharged from condenser and a relatively cool mixture of liquid and vaporous refrigerant discharged from the evaporator. This heat exchange relationship substantially sub-cools the hot liquid refrigerant which undergoes little or no evaporation across the expansion device and provides a liquid over-feeding operation through the evaporator for effectively using 100 percent of evaporator for cooling purposes and for providing the aforementioned mixture of liquid and vaporous refrigerant.

Mei, Viung C. (Oak Ridge, TN); Chen, Fang C. (Knoxville, TN)

1993-01-01T23:59:59.000Z

236

Extruders & Expanders in Pet Food, Aquatic & Livestock Feeds  

Science Conference Proceedings (OSTI)

This book serves as a source of information to anyone involved with the feed industry as a guide for understanding extrusion, the proper selection of the raw ingredients, the operation of extrusion equipment, and the processes involved in running an extend

237

Nuclear Maintenance Applications Center: Feed Pump Turbine Maintenance Guide  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) Steam Turbines and Auxiliaries Program 65 and the Nuclear Maintenance Application Center have developed a series of maintenance guides to assist plant personnel with the performance of various maintenance tasks associated with a wide variety of plant components. The objective of this project was to publish a maintenance guide for the feed pump turbines that included an ...

2012-09-25T23:59:59.000Z

238

Waste Feed Delivery Environmental Permits and Approvals Plan  

Science Conference Proceedings (OSTI)

This plan describes the environmental permits approvals, and other requirements that may affect establishment of a waste feed delivery system for the Hanford Site's River Protection Project. This plan identifies and screens environmental standards for potential applicability, outlines alternatives for satisfying applicable standards, and describes preferred permitting and approval approaches.

TOLLEFSON, K.S.

2000-01-18T23:59:59.000Z

239

Results from NationalResults from National Biorefinery Siting ModelBiorefinery Siting Model  

E-Print Network (OSTI)

of a local Jatropha-based biofuel supply chain and produce the technical and organizational knowledgeBRIEFING NOTES November 2010 Sustainable biofuels in Africa: cultivation of Jatropha curcas in Mali Background Case study 1 - Mali Case study 2 - Malawi Policy recommendations Biofuel cultivation worldwide

California at Davis, University of

240

Microscopic Analysis of Agriculture Products, 4th EditionChapter 3 Feed Ingredients of Animal Origin  

Science Conference Proceedings (OSTI)

Microscopic Analysis of Agriculture Products, 4th Edition Chapter 3 Feed Ingredients of Animal Origin Methods and Analyses eChapters Methods - Analyses Books Downloadable pdf of Chapter 3 Feed Ingredients of Animal Or

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Renewable Energy Feed-in Tariffs: Lessons Learned from the U...  

Open Energy Info (EERE)

Feed-in Tariffs: Lessons Learned from the U.S. and Abroad Presentation Jump to: navigation, search Logo: Renewable Energy Feed-in Tariffs: Lessons Learned from the U.S. and Abroad...

242

FEED SYSTEMS WWW.NETL.DOE.GOV Gasification Systems Program Research...  

NLE Websites -- All DOE Office Websites (Extended Search)

FEED SYSTEMS WWW.NETL.DOE.GOV Gasification Systems Program Research and Development Areas are in Color. Feed Systems R&D Areas are Brighter. Grey sections are part of other closely...

243

Microscopic Analysis of Agriculture Products, 4th EditionChapter 4 Feed Ingredients of Marine Origin  

Science Conference Proceedings (OSTI)

Microscopic Analysis of Agriculture Products, 4th Edition Chapter 4 Feed Ingredients of Marine Origin Methods and Analyses eChapters Methods - Analyses Books Press Downloadable pdf of Chapter 4 Feed Ingredients of

244

Microscopic Analysis of Agriculture Products, 4th EditionChapter 2 Feed Ingredients of Plant Origin  

Science Conference Proceedings (OSTI)

Microscopic Analysis of Agriculture Products, 4th Edition Chapter 2 Feed Ingredients of Plant Origin Methods and Analyses eChapters Methods - Analyses Books Press Downloadable pdf of Chapter 2 Feed Ingredients of

245

International Renewable Energy Agency (IRENA) Feed | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » International Renewable Energy Agency (IRENA) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP)

246

International Atomic Energy Agency Feed | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » International Atomic Energy Agency Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP)

247

Argonne cleans contaminated Kansas site by feeding bacteria | Argonne  

NLE Websites -- All DOE Office Websites (Extended Search)

Argonne cleans contaminated Kansas site by feeding bacteria Argonne cleans contaminated Kansas site by feeding bacteria By Jared Sagoff * October 8, 2010 Tweet EmailPrint When cleaning the bathroom, we usually consider bacteria the enemy. However, a new study conducted by environmental scientists at the U.S. Department of Energy's Argonne National Laboratory has demonstrated a way to enlist bacteria in the fight to cleanse some of the country's most intractably polluted locations. Last year, a team of Argonne scientists led by Lorraine LaFreniere injected iron microparticles underneath fields long-polluted with carbon tetrachloride near Centralia, Kansas. The researchers coated the microparticles with organic material, which served as bait for bacteria that created the conditions necessary to safely convert the toxic chemical

248

Lawrence Berkeley National Laboratory (LBNL) Feed | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Lawrence Berkeley National Laboratory (LBNL) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP)

249

A Policymaker's Guide to Feed-in Tariff Policy Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Toby D. Couture Toby D. Couture E3 Analytics Karlynn Cory Claire Kreycik National Renewable Energy Laboratory Emily Williams U.S. Department of State Technical Report NREL/TP-6A2-44849 July 2010 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. A Policymaker's Guide to Feed-in Tariff Policy Design On the Cover Feed-in tari ff (FIT) policies can apply to several renewable energy technologies and their applications including (top to bottom) solar photovoltaics (PV) on commercial buildings (Art Institute of Chicago - Chicago, Illinois); on-site wind energy (Great Lakes Science Center - Cleveland, Ohio); rooftop PV on residences (Glastonbury, Connecticut); solar power tower

250

Process for coal liquefaction employing selective coal feed  

DOE Patents (OSTI)

An improved coal liquefaction process is provided whereby coal conversion is improved and yields of pentane soluble liquefaction products are increased. In this process, selected feed coal is pulverized and slurried with a process derived solvent, passed through a preheater and one or more dissolvers in the presence of hydrogen-rich gases at elevated temperatures and pressures, following which solids, including mineral ash and unconverted coal macerals, are separated from the condensed reactor effluent. The selected feed coals comprise washed coals having a substantial amount of mineral matter, preferably from about 25-75%, by weight, based upon run-of-mine coal, removed with at least 1.0% by weight of pyritic sulfur remaining and exhibiting vitrinite reflectance of less than about 0.70%.

Hoover, David S. (New Tripoli, PA); Givens, Edwin N. (Bethlehem, PA)

1983-01-01T23:59:59.000Z

251

RETHINKING FEED-IN TARIFFS AND PRIORITY DISPATCH FOR RENEWABLES  

E-Print Network (OSTI)

Within the German System of feed-in tariffs for renewable electricity supply (RES) producers of renewable electricity also have the privilege of priority dispatch. Depending on the design of the tariff this is either a physical priority dispatch (guaranteed grid access) or a financial priority (bonus payments). In either case suppliers of renewable energy sources are inclined to deliver energy even when the cost of production exceeds the market price, i.e. the electricitys value. We suggest to remove the priority dispatch and to modify the design of feed-in tariffs in such a way that RES suppliers receive a payment for their potential supply in cases where the price of electricity drops below their marginal costs. Thereby, renewable electricity producers will suffer no drawbacks but social welfare increases.

Mark Andor; Kai Flinkerbusch; Matthias Janssen; Bjrn Liebau; Magnus Wobben

2010-01-01T23:59:59.000Z

252

Development of High-Pressure Dry Feed Pump for Gasification Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Pressure Dry Feed Pressure Dry Feed Pump for Gasification Systems Background Even though coal-based power generation via Integrated Gasification Combined Cycle (IGCC) is more efficient, cleaner, and uses less water than conventional pulverized coal burning systems, widespread IGCC deployment has not occurred because of its relatively high cost. The Pratt & Whitney Rocketdyne (PWR) high-pressure dry feed pump addresses IGCC cost disparity by enabling lower cost and more reliable coal feed

253

FAT QUALITY AND FEEDING VALUE OF FAT FOR FEEDLOT CATTLE Imperial Valley Agricultural Center  

E-Print Network (OSTI)

contaminated tallow (Metcalf, 1972). It would be expensive to analyze every shipment of feed fat for pesticide

Delany, Mary E.

254

A liquid over-feeding military air conditioner  

SciTech Connect

A 3-ton military air conditioning unit has been experimentally studied for baseline and liquid over-feeding operation (LOF). The test results indicate that LOF outperforms the baseline case over a wide ambient temperature range in terms of cooling capacity, power consumption, and system coefficient of performance (COP). At 95 F test point, the COP improvement for LOF is 19.8% over that of the baseline case. However, optimal refrigerant charge is essential for LOF to work properly.

Mei, V.C.; Chen, F.C. [Oak Ridge National Lab., TN (United States); Bolton, C. [Army CECOM Research, Development, and Engineering Center, Fort Belvoir, VA (United States)

1995-09-01T23:59:59.000Z

255

Statistical modeling of root geometrical dimensions of gas turbine blade in creep feed grinding process  

Science Conference Proceedings (OSTI)

Creep feed grinding is widely used in manufacturing suppe-ralloy materials. The main objectives of this research deal with the influences of major process parameters and their interactions of creep feed grinding process such as wheel speed, workpiece ... Keywords: analysis of variance, creep feed grinding, interactive effect, regression, root geometrical dimensions

A. R. Fazeli Nahrekhalaji

2010-04-01T23:59:59.000Z

256

Preliminary Report on the Feeding Habits of Tunas in the Gulf of Guinea  

E-Print Network (OSTI)

551 Preliminary Report on the Feeding Habits of Tunas in the Gulf of Guinea by Paul N. Sund on the Feeding Habits of Tunas in the Gulf of Guinea By PAUL N. SUND and WILLIAM J. RICHARDS United States Fish;#12;Preliminary Report on the Feeding Habits of Tunas in the Gulf of Guinea^ By PAUL N. SUND, Oceanographer

257

Best Practices and Design Options for Feed-in Tariffs | Open Energy  

Open Energy Info (EERE)

Best Practices and Design Options for Feed-in Tariffs Best Practices and Design Options for Feed-in Tariffs Jump to: navigation, search Tool Summary Name: Best Practices and Design Options for Feed-in Tariffs Agency/Company /Organization: International Feed-in Cooperation Sector: Energy Focus Area: Renewable Energy Topics: Policies/deployment programs Resource Type: Publications, Lessons learned/best practices References: Evaluation of different feed-in tariff design options - Best practice paper for the International Feed-In Cooperation[1] Introduction.....1 2 Overview.....2 2.1 Definition of renewable energy sources.....2 2.2 Present status and historic development of RES-E in the EU.....2 2.3 Motivation to support RES-E and Member State targets.....5 2.4 Instruments to support RES-E....7 2.5 The International Feed-In Cooperation....8

258

Design and performance of feed delivery systems for simulated radioactive waste slurries  

Science Conference Proceedings (OSTI)

Processes for vitrifying simulated high-level radioactive waste have been developed at the Pacific Northwest Laboratory (PNL) over the last several years. Paralleling this effort, several feed systems used to deliver the simulated waste slurry to the melter have been tested. Because there had been little industrial experience in delivering abrasive slurries at feed rates of less than 10 L/min, early experience helped direct the design of more-dependable systems. Also, as feed delivery requirements changed, the feed system was modified to meet these new requirements. The various feed systems discussed in this document are part of this evolutionary process, so they have not been ranked against each other. The four slurry feed systems discussed are: (1) vertical-cantilevered centrifugal pump system; (2) airlift feed systems; (3) pressurized-loop systems; and (4) positive-displacement pump system. 20 figures, 11 tables.

Perez, J.M. Jr.

1983-02-01T23:59:59.000Z

259

Using CODEQ to Train Feed-forward Neural Networks  

E-Print Network (OSTI)

CODEQ is a new, population-based meta-heuristic algorithm that is a hybrid of concepts from chaotic search, opposition-based learning, differential evolution and quantum mechanics. CODEQ has successfully been used to solve different types of problems (e.g. constrained, integer-programming, engineering) with excellent results. In this paper, CODEQ is used to train feed-forward neural networks. The proposed method is compared with particle swarm optimization and differential evolution algorithms on three data sets with encouraging results.

Omran, Mahamed G H

2010-01-01T23:59:59.000Z

260

Solid fuel feed system for a fluidized bed  

SciTech Connect

A fluidized bed for the combustion of coal, with limestone, is replenished with crushed coal from a system discharging the coal laterally from a station below the surface level of the bed. A compartment, or feed box, is mounted at one side of the bed and its interior separated from the bed by a weir plate beneath which the coal flows laterally into the bed while bed material is received into the compartment above the plate to maintain a predetermined minimum level of material in the compartment.

Jones, Brian C. (Windsor, CT)

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Pressurized feed-injection spray-forming apparatus  

SciTech Connect

A spray apparatus and method for injecting a heated, pressurized liquid in a first predetermined direction into a pressurized gas flow that is flowing in a second predetermined direction, to provide for atomizing and admixing the liquid with the gas to form a two-phase mixture. A valve is also disposed within the injected liquid conduit to provide for a pulsed injection of the liquid and timed deposit of the atomized gas phase. Preferred embodiments include multiple liquid feed ports and reservoirs to provide for multiphase mixtures of metals, ceramics, and polymers.

Berry, Ray A. (Idaho Falls, ID); Fincke, James R. (Idaho Falls, ID); McHugh, Kevin M. (Idaho Falls, ID)

1995-01-01T23:59:59.000Z

262

THE HANFORD WASTE FEED DELIVERY OPERATIONS RESEARCH MODEL  

SciTech Connect

Washington River Protection Solutions (WRPS), the Hanford tank farm contractor, is tasked with the long term planning of the cleanup mission. Cleanup plans do not explicitly reflect the mission effects associated with tank farm operating equipment failures. EnergySolutions, a subcontractor to WRPS has developed, in conjunction with WRPS tank farms staff, an Operations Research (OR) model to assess and identify areas to improve the performance of the Waste Feed Delivery Systems. This paper provides an example of how OR modeling can be used to help identify and mitigate operational risks at the Hanford tank farms.

BERRY J; GALLAHER BN

2011-01-13T23:59:59.000Z

263

NIPSCO - Feed-In Tariff | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » NIPSCO - Feed-In Tariff NIPSCO - Feed-In Tariff < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Multi-Family Residential Nonprofit Residential Schools State Government Tribal Government Savings Category Bioenergy Water Buying & Making Electricity Solar Wind Maximum Rebate Rates may not exceed the published tariff rate Program Info Start Date 07/13/2011 State Indiana Program Type Performance-Based Incentive Rebate Amount Wind 100kW or less: $0.17/kWh Wind 100kW-2MW: $0.10/kWh Solar 10kW or less: $0.30/kWh Solar 10kW-2MW: $0.26/kWh Biomass 5MW or less: $0.106/kWh Hydroelectric 1MW or less: $0.12/kWh Non-biomass facilities greater than 2 MW are subject to a formula rate Provider Northern Indiana Public Service Corporation

264

Vertical feed stick wood fuel burning furnace system  

DOE Patents (OSTI)

A new and improved stove or furnace for efficient combustion of wood fuel including a vertical feed combustion chamber for receiving and supporting wood fuel in a vertical attitude or stack, a major upper portion of the combustion chamber column comprising a water jacket for coupling to a source of water or heat transfer fluid and for convection circulation of the fluid for confining the locus of wood fuel combustion to the bottom of the vertical gravity feed combustion chamber. A flue gas propagation delay channel extending from the laterally directed draft outlet affords delayed travel time in a high temperature environment to assure substantially complete combustion of the gaseous products of wood burning with forced air as an actively induced draft draws the fuel gas and air mixture laterally through the combustion and high temperature zone. Active sources of forced air and induced draft are included, multiple use and circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

Hill, Richard C. (Orono, ME)

1984-01-01T23:59:59.000Z

265

Renewable Energy Feed-in Tariffs: Lessons Learned from the U.S. and Abroad  

Open Energy Info (EERE)

Renewable Energy Feed-in Tariffs: Lessons Learned from the U.S. and Abroad Renewable Energy Feed-in Tariffs: Lessons Learned from the U.S. and Abroad Presentation Jump to: navigation, search Tool Summary Name: Renewable Energy Feed-in Tariffs: Lessons Learned from the U.S. and Abroad Presentation Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Renewable Energy Topics: Policies/deployment programs Resource Type: Presentation, Lessons learned/best practices References: Renewable Energy Feed-in Tariffs: Lessons Learned from the U.S. and Abroad Presentation[1] Logo: Renewable Energy Feed-in Tariffs: Lessons Learned from the U.S. and Abroad Presentation This presentation reviews Feed-in Tariff (FIT) Policy Overview, FIT Policy Implementation in the U.S., Policy Design Comparison with Europe, FIT

266

Global Energy Transfer - Feed-in Tariffs for Developing Countries | Open  

Open Energy Info (EERE)

Energy Transfer - Feed-in Tariffs for Developing Countries Energy Transfer - Feed-in Tariffs for Developing Countries Jump to: navigation, search Tool Summary Name: Global Energy Transfer - Feed-in Tariffs for Developing Countries Agency/Company /Organization: Deutsche Bank Group Sector: Energy Focus Area: Renewable Energy Topics: Finance Resource Type: Publications Website: www.dbcca.com/dbcca/EN/investment-research/investment_research_2347.js References: Get FiT Program[1] This report provides information on best practices for adapting the design of feed-in tariffs in developing countries. Chapters The challenge of renewable energy in the developing world: A project level perspective.............................................................. 11 The GET FiT Solution...................................................................

267

Effects of corn processing and dietary wet corn gluten feed on newly received and growing cattle.  

E-Print Network (OSTI)

??Effects of corn processing with or without the inclusion of wet corn gluten feed (WCGF) on growth and performance were analyzed in two experiments. Treatments (more)

Siverson, Anna

2012-01-01T23:59:59.000Z

268

Alternatives Generation and Analysis for Phase 1 High Level Waste Feed Tanks Selection  

Science Conference Proceedings (OSTI)

A recent revision of the US. Department of Energy privatization contract for the immobilization of high-level waste (HLW) at Hanford necessitates the investigation of alternative waste feed sources to meet contractual feed requirements. This analysis identifies wastes to be considered as HLW feeds and develops and conducts alternative analyses to comply with established criteria. A total of 12,426 cases involving 72 waste streams are evaluated and ranked in three cost-based alternative models. Additional programmatic criteria are assessed against leading alternative options to yield an optimum blended waste feed stream.

CRAWFORD, T.W.

1999-08-16T23:59:59.000Z

269

Air feed tube support system for a solid oxide fuel cell generator  

DOE Patents (OSTI)

A solid oxide fuel cell generator (12), containing tubular fuel cells (36) with interior air electrodes (18), where a supporting member (82) containing a plurality of holes (26) supports oxidant feed tubes (51), which pass from an oxidant plenum (52") into the center of the fuel cells, through the holes (26) in the supporting member (82), where a compliant gasket (86) around the top of the oxidant feed tubes and on top (28) of the supporting member (82) helps support the oxidant feed tubes and center them within the fuel cells, and loosen the tolerance for centering the air feed tubes.

Doshi, Vinod B. (Monroeville, PA); Ruka, Roswell J. (Pittsburgh, PA); Hager, Charles A. (Zelienople, PA)

2002-01-01T23:59:59.000Z

270

Renewable Energy Prices in State-Level Feed-in Tariffs: Federal...  

NLE Websites -- All DOE Office Websites (Extended Search)

408 January 2010 Renewable Energy Prices in State-Level Feed-in Tariffs: Federal Law Constraints and Possible Solutions Scott Hempling National Regulatory Research Institute Silver...

271

ACTIVE PROCESS DEVELOPMENT ACTIVITIES FOR PROCESSING OF FEED MATERIALS  

SciTech Connect

The carbonate and organic leaching processes for the recovery of U from its ores are outlined. The Excer prccess (ion-exchange conversion and electrolytic reduction) and the Fluorox process (starch-- HF reaction) for the production of UF/sub 4/ from ore concentrate and depleted reactor fuels are described. The fluidized-bed process for UF/sub 4/ production from UO/sub 2/(NO/ sub 3/)/sub 2/ is also described. Methods for improving the reactivity of UO/sub 3/ and mechanical and thermal processes for increasing the density of UF/sub 4/ were investigated. Applications of fluoride volatility prccesses to feed materials are discussed. (C.W.H.)

1956-01-01T23:59:59.000Z

272

GABA in the nucleus accumbens shell participates in the central regulation of feeding behavior  

E-Print Network (OSTI)

We have demonstrated previously that injections of 6,7dinitroquinoxaline-2,3-dione into the nucleus accumbens shell (AcbSh) elicits pronounced feeding in satiated rats. This glutamate antagonist blocks AMPA and kainate receptors and most likely increases food intake by disrupting a tonic excitatory input to the AcbSh, thus decreasing the firing rate of a population of local neurons. Because the application of GABA agonists also decreases neuronal activity, we hypothesized that administration of GABA agonists into the AcbSh would stimulate feeding in satiated rats. We found that acute inhibition of cells in the AcbSh via administration of the GABAA receptor agonist muscimol or the GABAB receptor agonist baclofen elicited intense, dose-related feeding without altering water intake. Muscimol-induced feeding was blocked by coadministration of the selective GABAA receptor blocker bicuculline, but not by the GABAB receptor blocker saclofen. Conversely, baclofen-induced feeding was blocked by coadministration of saclofen, but was not affected by bicuculline. Furthermore, we found that increasing local levels of GABA by administration of a selective GABA-transaminase inhibitor, ?-vinyl-GABA, elicited robust feeding in satiated rats, suggesting a physiological role for endogenous AcbSh GABA in the control of feeding. A mapping study showed that although some feeding can be elicited by muscimol injections near the lateral ventricles, the ventromedial AcbSh is the most sensitive site for eliciting feeding. These findings demonstrate that manipulation of GABAsensitive cells in the AcbSh can have a pronounced, but specific, effect on feeding behavior in rats. They also constitute the initial description of a novel and potentially important component of the central mechanisms controlling food intake. Key words: GABA; food intake; nucleus accumbens shell; muscimol; baclofen; feeding behavior; ?-vinyl-GABA The nucleus accumbens is a basal forebrain structure that is perhaps best known for being an important constituent of the neural systems mediating reward and reinforcement (Koob and

Thomas R. Stratford; Ann E. Kelley

1997-01-01T23:59:59.000Z

273

Is there a route to a UK Feed in Tariff for renewable energy?  

E-Print Network (OSTI)

1 Is there a route to a UK Feed in Tariff for renewable energy? ICEPT Discussion Paper October 2010 University #12;2 Is there a route to a UK Feed in Tariff for renewable energy? Introduction This discussion paper is concerned with the potential to change the way the UK provides support for renewable energy

274

Active NOX Control of Cogen Gas Turbine Exhaust using a Nonlinear Feed Forward with Cascade Architecture  

E-Print Network (OSTI)

Active NOX Control of Cogen Gas Turbine Exhaust using a Nonlinear Feed Forward with Cascade control, cogeneration, gas turbine, model based control, feed forward, cascade ABSTRACT Presented is a model based strategy for controlling the NOX concentration of natural gas turbine emissions

Cooper, Doug

275

The effect of food hardness on feeding behaviour in frugivorous bats (Phyllostomidae): an experimental study  

E-Print Network (OSTI)

The effect of food hardness on feeding behaviour in frugivorous bats (Phyllostomidae hardness. Data summarizing ingestive and fruit processing behaviours were collected during feeding experiments that consisted of eating hard and soft fruits of similar size, shape, and mass. Variables analysed

Dumont, Elizabeth R.

276

Reducing stress in sheep by feeding the seaweed Ascophyllum nodosum  

E-Print Network (OSTI)

Feeding the extract of the seaweed Ascophyllum nodosum (ANOD) has been shown to mediate the response of livestock to certain environmental stressors. To determine if feeding ANOD is useful in alleviating handling and transport stress, two trials were conducted. The dose response trial was conducted to determine at which rate ANOD should be fed to obtain beneficial results. Forty-four lambs received ANOD at either 0 (control), 0.5, 1, or 2% of dry matter intake per day (approximately 0, 0.25, 0.5, and 1 g/kg of body wt per day). Sheep were administered ANOD twice daily for 14d. After 14d of supplementation, IgG and IgM antibody response to ovalbumin was reduced by ANOD. The sheep fed at the 2% rate had a narrower range of body temperature during transport than controls. The 2% rate also had lower body temperatures than the controls during times when the thermal heat index was above 80. The sheep fed the 2% rate had lower cortisol and aldosterone concentrations during walking and transport compared to the controls. Post transport, sheep supplemented at the 1 or 2% rates were less dehydrated as indicated by plasma chemistry profiles andelectrolyte concentrations. In a subsequent trial, the major components of the ANOD (fucoidan, salt, and betaine) were fed to determine which, if any, were responsible for the treatment effects in the dose response trial. After 14d supplementation, the salt and ANOD sheep had a depressed IgG and IgM antibody response to ovalbumin and an increase in white blood cell counts and lymphocyte numbers compared to controls. The ANOD sheep were generally lower in body temperature than the other treatments during transport. The ANOD and salt sheep had lower cortisol concentrations compared to controls. At the end of transport, sheep supplemented with ANOD or salt had lower electrolyte concentrations than control sheep. Supplementation with ANOD was associated with lowered body temperature; however, it also suppressed antibody titer which could leave animals susceptible to bacterial infection. The lowered antibody production is of concern and needs further study before ANOD can be recommended as a useful stress management tool.

Archer, Gregory Scott

2005-08-01T23:59:59.000Z

277

FIT for Use Everywhere? Assessing Experiences With Renewable Energy Feed-In  

Open Energy Info (EERE)

FIT for Use Everywhere? Assessing Experiences With Renewable Energy Feed-In FIT for Use Everywhere? Assessing Experiences With Renewable Energy Feed-In Tariffs Jump to: navigation, search Tool Summary Name: FIT for Use Everywhere? Assessing Experiences With Renewable Energy Feed-In Tariffs Agency/Company /Organization: UNEP-Risoe Centre Sector: Energy Focus Area: Renewable Energy Topics: Market analysis, Pathways analysis Resource Type: Publications, Case studies/examples Website: tech-action.org/Perspectives/FITuseEverywhere.pdf Cost: Free FIT for Use Everywhere? Assessing Experiences With Renewable Energy Feed-In Tariffs Screenshot References: FIT for Use Everywhere? Assessing Experiences With Renewable Energy Feed-In Tariffs[1] This article aims to provide a summary to governments and stakeholders in developing countries on the function, strengths and potential drawbacks of

278

A Policymaker's Guide to Feed-In Tariff Policy Design | Open Energy  

Open Energy Info (EERE)

A Policymaker's Guide to Feed-In Tariff Policy Design A Policymaker's Guide to Feed-In Tariff Policy Design Jump to: navigation, search Tool Summary LAUNCH TOOL Name: A Policymaker's Guide to Feed-In Tariff Policy Design Agency/Company /Organization: National Renewable Energy Laboratory Partner: United States Department of State Sector: Energy Topics: Implementation, Policies/deployment programs Resource Type: Publications, Guide/manual Website: www.nrel.gov/docs/fy10osti/44849.pdf A Policymaker's Guide to Feed-In Tariff Policy Design Screenshot References: FIT Policy Design Guide[1] Logo: A Policymaker's Guide to Feed-In Tariff Policy Design This report provides U.S. policymakers who have decided to enact FIT policies with a roadmap to the design options: It explains the policy and how it works, explores the variety of design options available, and

279

"Feds Feed Families" Events to Be Held at Department of Energy Facilities |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

"Feds Feed Families" Events to Be Held at Department of Energy "Feds Feed Families" Events to Be Held at Department of Energy Facilities "Feds Feed Families" Events to Be Held at Department of Energy Facilities August 4, 2011 - 9:23am Addthis Deputy Secretary Daniel Poneman and his band "Yellow Cake" at last year's Feds Feed Families event. | Energy Department photo Deputy Secretary Daniel Poneman and his band "Yellow Cake" at last year's Feds Feed Families event. | Energy Department photo What are the key facts? Events to be held at Forrestal Building on August 4 from 11:00 a.m. - 2:00 p.m., and at the Germantown Building on August 11 from 11:00 a.m. - 2:00 p.m. Last year, the DOE exceeded its donation goal by 300 percent with 120,014 lbs. of donations. Deputy Secretary Daniel Poneman is in a band called "Yellow Cake".

280

Innovative Feed-In Tariff Designs that Limit Policy Costs | Open Energy  

Open Energy Info (EERE)

Innovative Feed-In Tariff Designs that Limit Policy Costs Innovative Feed-In Tariff Designs that Limit Policy Costs Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Innovative Feed-In Tariff Designs that Limit Policy Costs Agency/Company /Organization: National Renewable Energy Laboratory Partner: E3 Analytics Sector: Energy Focus Area: Renewable Energy Phase: Evaluate Options Topics: Policies/deployment programs Resource Type: Case studies/examples, Lessons learned/best practices, Technical report Website: www.nrel.gov/docs/fy11osti/50225.pdf Cost: Free OpenEI Keyword(s): feed-in tariffs, feed tariffs, FITs, renewable energy, policy design, solar, wind, geothermal Language: English This report describes four of the most prevalent financial structures used by the renewable sector and evaluates the impact of financial structure on

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Accepting Mixed Waste as Alternate Feed Material for Processing and Disposal at a Licensed Uranium Mill  

SciTech Connect

Certain categories of mixed wastes that contain recoverable amounts of natural uranium can be processed for the recovery of valuable uranium, alone or together with other metals, at licensed uranium mills, and the resulting tailings permanently disposed of as 11e.(2) byproduct material in the mill's tailings impoundment, as an alternative to treatment and/or direct disposal at a mixed waste disposal facility. This paper discusses the regulatory background applicable to hazardous wastes, mixed wastes and uranium mills and, in particular, NRC's Alternate Feed Guidance under which alternate feed materials that contain certain types of mixed wastes may be processed and disposed of at uranium mills. The paper discusses the way in which the Alternate Feed Guidance has been interpreted in the past with respect to processing mixed wastes and the significance of recent changes in NRC's interpretation of the Alternate Feed Guidance that sets the stage for a broader range of mixed waste materials to be processed as alternate feed materials. The paper also reviews the le gal rationale and policy reasons why materials that would otherwise have to be treated and/or disposed of as mixed waste, at a mixed waste disposal facility, are exempt from RCRA when reprocessed as alternate feed material at a uranium mill and become subject to the sole jurisdiction of NRC, and some of the reasons why processing mixed wastes as alternate feed materials at uranium mills is preferable to direct disposal. Finally, the paper concludes with a discussion of the specific acceptance, characterization and certification requirements applicable to alternate feed materials and mixed wastes at International Uranium (USA) Corporation's White Mesa Mill, which has been the most active uranium mill in the processing of alternate feed materials under the Alternate Feed Guidance.

Frydenland, D. C.; Hochstein, R. F.; Thompson, A. J.

2002-02-26T23:59:59.000Z

282

Molten metal feed system controlled with a traveling magnetic field  

DOE Patents (OSTI)

A continuous metal casting system in which the feed of molten metal is controlled by means of a linear induction motor capable of producing a magnetic traveling wave in a duct that connects a reservoir of molten metal to a caster. The linear induction motor produces a traveling magnetic wave in the duct in opposition to the pressure exerted by the head of molten metal in the reservoir so that p.sub.c =p.sub.g -p.sub.m where p.sub.c is the desired pressure in the caster, p.sub.g is the gravitational pressure in the duct exerted by the force of the head of molten metal in the reservoir, and p.sub.m is the electromagnetic pressure exerted by the force of the magnetic field traveling wave produced by the linear induction motor. The invention also includes feedback loops to the linear induction motor to control the casting pressure in response to measured characteristics of the metal being cast.

Praeg, Walter F. (Palos Park, IL)

1991-01-01T23:59:59.000Z

283

Molten metal feed system controlled with a traveling magnetic field  

DOE Patents (OSTI)

An apparatus for controlling the feed of molten metal in a continuous metal casting system comprising a linear induction motor capable of producing a magnetic traveling wave in a duct that connects a reservoir of molten metal to a caster. The linear induction motor produces a traveling magnetic wave in the duct in opposition to the pressure exerted by the head of molten metal in the reservoir so that p{sub c} = p{sub g} {minus} p{sub m} where p{sub c} is the desired pressure in the caster, p{sub g} is the gravitational pressure in the duct exerted by the force of the head of molten metal in the reservoir, and p{sub m} is the electromagnetic pressure exerted by the force of the magnetic field traveling wave produced by the linear induction motor. The invention also includes feedback loops to the linear induction motor to control the casting pressure in response to measured characteristic of the metal being cast. 8 figs.

Praeg, W.F.

1989-03-06T23:59:59.000Z

284

Innovative Feed-In Tariff Designs that Limit Policy Costs  

Science Conference Proceedings (OSTI)

Feed-in tariffs (FITs) are the most prevalent renewable energy policy used globally to date, and there are many benefits to the certainty offered in the marketplace to reduce development risks and associated financing costs and to grow the renewable energy industry. However, concerns over escalating costs in jurisdictions with FIT policies have led to increased attention on cost control in renewable energy policy design. In recent years, policy mechanisms for containing FIT costs have become more refined, allowing policymakers to exert greater control on policy outcomes and on the resulting costs to ratepayers. As policymakers and regulators in the United States begin to explore the use of FITs, careful consideration must be given to the ways in which policy design can be used to balance the policies' advantages while bounding its costs. This report explores mechanisms that policymakers have implemented to limit FIT policy costs. If designed clearly and transparently, such mechanisms can align policymaker and market expectations for project deployment. Three different policy tools are evaluated: (1) caps, (2) payment level adjustment mechanisms, and (3) auction-based designs. The report employs case studies to explore the strengths and weaknesses of these three cost containment tools. These tools are then evaluated with a set of criteria including predictability for policymakers and the marketplace and the potential for unintended consequences.

Kreycik, C.; Couture, T. D.; Cory, K. S.

2011-06-01T23:59:59.000Z

285

Environmental Survey preliminary report, Feed Materials Production Center, Fernald, Ohio  

Science Conference Proceedings (OSTI)

This report presents the preliminary findings from the first phase of the environmental survey of the United States Department of Energy (DOE) Feed Materials Production Center (FMPC), conducted June 16 through 27, 1986. The survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with the FMPC. The survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the survey involves the review of existing site environmental data, observations of the operations carried on at FMPC, and interviews with site personnel. The survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its onsite activities. The Sampling and Analysis Plan will be executed by a DOE national laboratory or a support contractor. When completed, the results will be incorporated into the FMPC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the FMPC survey. 41 refs., 20 figs., 25 tabs.

Not Available

1987-03-01T23:59:59.000Z

286

Vertical feed stick wood fuel burning furnace system  

DOE Patents (OSTI)

A stove or furnace for efficient combustion of wood fuel includes a vertical feed combustion chamber (15) for receiving and supporting wood fuel in a vertical attitude or stack. A major upper portion of the combustion chamber column comprises a water jacket (14) for coupling to a source of water or heat transfer fluid for convection circulation of the fluid. The locus (31) of wood fuel combustion is thereby confined to the refractory base of the combustion chamber. A flue gas propagation delay channel (34) extending laterally from the base of the chamber affords delayed travel time in a high temperature refractory environment sufficient to assure substantially complete combustion of the gaseous products of wood burning with forced air prior to extraction of heat in heat exchanger (16). Induced draft draws the fuel gas and air mixture laterally through the combustion chamber and refractory high temperature zone to the heat exchanger and flue. Also included are active sources of forced air and induced draft, multiple circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

Hill, Richard C. (Orono, ME)

1982-01-01T23:59:59.000Z

287

A liquid over-feeding military air conditioner  

SciTech Connect

A 3.3-ton military air conditioning unit has been studied experimentally in both baseline (as received) and as modified for liquid over-feeding (LOF) operation. Tne baseline test, using a proper refrigerant charge, showed the measured cooling capacity to be less than 1% off the rated capacity at 95{degrees}F ambient temperature. The test results indicate that LOF operation outperforms the baseline case over a wide ambient temperature range in terms of cooling capacity, power consumption, and system coefficient of performance (COP). At a 95{degrees}F test point, LOF operation has a cooling capacity of 51,100 BTU per hour, which is a 28.9% improvement over the baseline operation capacity of 39,600 BTU per hour. The COP for LOF at 95{degrees}F is 2.62, which is 29% better than the baseline COP of 2.03. However, an optimal refrigerant charge is essential for LOF to work properly.

Mei, V.C.; Chen, F.C.

1995-07-01T23:59:59.000Z

288

Policymaker's Guide to Feed-in Tariff Policy Design  

SciTech Connect

Feed-in tariffs (FITs) are the most widely used renewable energy policy in the world for driving accelerating renewable energy (RE) deployment, accounting for a greater share of RE development than either tax incentives or renewable portfolio standard (RPS) policies. FITs have generated significant RE deployment, helping bring the countries that have implemented them successfully to the forefront of the global RE industry. In the European Union (EU), FIT policies have led to the deployment of more than 15,000 MW of solar photovoltaic (PV) power and more than 55,000 MW of wind power between 2000 and the end of 2009. In total, FITs are responsible for approximately 75% of global PV and 45% of global wind deployment. Countries such as Germany, in particular, have demonstrated that FITs can be used as a powerful policy tool to drive RE deployment and help meet combined energy security and emissions reductions objectives. This policymaker's guide provides a detailed analysis of FIT policy design and implementation and identifies a set of best practices that have been effective at quickly stimulating the deployment of large amounts of RE generation. Although the discussion is aimed primarily at decision makers who have decided that a FIT policy best suits their needs, exploration of FIT policies can also help inform a choice among alternative renewable energy policies.

Couture, T. D.; Cory, K.; Kreycik, C.; Williams, E.

2010-07-01T23:59:59.000Z

289

Effect of gas feeding methods on optical properties of GaN grown by rapid thermal chemical vapor deposition reactor  

Science Conference Proceedings (OSTI)

Keywords: Ga vacancies, GaN growth, gas feeding method, optical property, rapid thermal chemical vapor deposition (RTCVD), yellow luminescence

Sun Jung Kim; Young Hun Seo; Kee Suk Nahm; Yun Bong Hahn; Hyun Wook Shim; Eun-Kyung Suh; Kee Young Lim; Hyung Jae Lee

1999-08-01T23:59:59.000Z

290

Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2  

SciTech Connect

This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

DYKES, A.A.

2000-10-11T23:59:59.000Z

291

Algae culture for cattle feed and water purification. Final report  

SciTech Connect

The feasibility of algae growth on centrate from anaerobic digester effluent and the refeed of both effluent solids and the algae to feedlot cattle were investigated. The digester was operated with dirt feedlot manure. The study serves as a supplement for the work to design a utility sized digester for the City of Lamar to convert local feedlot manure into a fuel gas. The biogas produced would power the electrical generation plant already in service. Previous studies have established techniques of digester operation and the nutritional value for effluent solids as fed to cattle. The inclusion of a single-strain of algae, Chlorella pyrenidosa in the process was evaluated here for its capability (1) to be grown in both open and closed ponds of the discharge water from the solids separation part of the process, (2) to purify the discharge water, and (3) to act as a growth stimulant for cattle feed consumption and conversion when fed at a rate of 6 grams per head per day. Although it was found that the algae could be cultured and grown on the discharge water in the laboratory, the study was unable to show that algae could accomplish the other objectives successfully. However, the study yielded supplementary information useful to the overall process design of the utility plant. This was (1) measurement of undried digester solids fed to cattle in a silage finishing ration (without algae) at an economic value of $74.99 per dry ton based on nutritional qualities, (2) development of a centrate treatment system to decolorize and disinfect centrate to allow optimum algae growth, and (3) information on ionic and mass balances for the digestion system. It is the recommendation of this study that algae not be used in the process in the Lamar bioconversion plant.

Varani, F.T.; Schellenbach, S.; Veatch, M.; Grover, P.; Benemann, J.

1980-05-16T23:59:59.000Z

292

,"Catalytic Reforming Downstream Processing of Fresh Feed Input"  

U.S. Energy Information Administration (EIA) Indexed Site

Catalytic Reforming Downstream Processing of Fresh Feed Input" Catalytic Reforming Downstream Processing of Fresh Feed Input" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Catalytic Reforming Downstream Processing of Fresh Feed Input",16,"Monthly","9/2013","1/15/2010" ,"Release Date:","11/27/2013" ,"Next Release Date:","Last Week of December 2013" ,"Excel File Name:","pet_pnp_dwns_a_(na)_ydr_mbblpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_pnp_dwns_a_(na)_ydr_mbblpd_m.htm" ,"Source:","Energy Information Administration"

293

Centro de Energías Renovables (CER) Feed | Open Energy Information  

Open Energy Info (EERE)

Feed Feed Jump to: navigation, search CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP) Information for Development Program (infoDev) International Atomic Energy Agency (IAEA) International Energy Agency (IEA)

294

Energy Sector Management Assistance Program of the World Bank Feed | Open  

Open Energy Info (EERE)

World Bank Feed World Bank Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

295

Organisation for Economic Co-Operation and Development Feed | Open Energy  

Open Energy Info (EERE)

Development Feed Development Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

296

Feds Feed Families Wraps Up Successful Campaign to Stock Area Food Banks |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feds Feed Families Wraps Up Successful Campaign to Stock Area Food Feds Feed Families Wraps Up Successful Campaign to Stock Area Food Banks Feds Feed Families Wraps Up Successful Campaign to Stock Area Food Banks August 1, 2012 - 12:00pm Addthis EM’s Nevada Site Office took first place in the site-submitted category of DOE’s CANstruction Sculpture Contest for its entry, shown here, inspired by London’s Tower Bridge during the 2012 Summer Olympics. EM's Nevada Site Office took first place in the site-submitted category of DOE's CANstruction Sculpture Contest for its entry, shown here, inspired by London's Tower Bridge during the 2012 Summer Olympics. EM Office of Strategic Planning and Analysis Director Barry Gaffney throws the ball that sends Senior Advisor for Environmental Management David Huizenga into the dunk tank during an event to collect nonperishable food items for the DOE Feeds Families campaign.

297

RSS Feeds for Specific Tropical Cyclones of the North Atlantic, Caribbean  

NLE Websites -- All DOE Office Websites (Extended Search)

RSS Feeds for Specific Tropical Cyclones of the North Atlantic, Caribbean RSS Feeds for Specific Tropical Cyclones of the North Atlantic, Caribbean Sea, and Gulf of Mexico (English) Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS COLLABORATE ABOUT Agriculture You are here Data.gov » Communities » Agriculture » Data RSS Feeds for Specific Tropical Cyclones of the North Atlantic, Caribbean Sea, and Gulf of Mexico (English) Dataset Summary Description The National Weather Service (NWS) National Hurricane Center uses regularly updated RSS feeds to disseminate North Atlantic, Caribbean Sea, and Gulf of Mexcio tropical cyclone and marine forecasts. Tags {hurricanes,"tropical cyclones",warning,watch," forecast",discussion,outlooks,"",marine,temperature," Atlantic","Caribbean Sea","Gulf of Mexico. "}

298

Mathematical model of steam generator feed system at power unit of nuclear plant  

Science Conference Proceedings (OSTI)

A mathematical model of a steam generator feed system at a power unit of a nuclear plant with variable values of transfer function coefficients is presented. The model is realized in the MATLAB/Simulink/Stateflow event-driven simulation.

E. M. Raskin; L. A. Denisova; V. P. Sinitsyn; Yu. V. Nesterov

2011-05-01T23:59:59.000Z

299

Long Island Power Authority - Solar Initiative Feed-in Tariff (New York) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Initiative Feed-in Tariff (New Solar Initiative Feed-in Tariff (New York) Long Island Power Authority - Solar Initiative Feed-in Tariff (New York) < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Multi-Family Residential Nonprofit Schools State Government Savings Category Solar Buying & Making Electricity Program Info Start Date 07/16/2012 Expiration Date 01/31/2014 State New York Program Type Performance-Based Incentive Rebate Amount Determined through the Clearing Price Auction Provider Long Island Power Authority The Long Island Power Authority's (LIPA) Feed-in Tariff II (FIT II) program provides fixed payments for electricity produced by approved photovoltaic systems over a fixed period of time. The program operates under a sell-all arrangement, where the full amount of energy production from the facility

300

NETL: Gasification Systems - Liquid Carbon Dioxide/Coal Slurry for Feeding  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed Systems Feed Systems Liquid Carbon Dioxide/Coal Slurry for Feeding Low-Rank Coal to Gasifiers Project Number: DE-FE0007977 There is increased interest in carbon capture and storage (CCS) for future coal-based power plants, and in a CCS integrated gasification plant, relatively pure, high pressure CO2 stream(s) will be available within the power plant. Electric Power Research Institute (EPRI) aims to help reduce the cost and improve the efficiency of integrated gasification combined cycle (IGCC) with CCS by using a portion of the high purity CO2 product stream as the carrier fluid to feed low rank coal (LRC) into the gasifier. EPRI proposes to confirm the potential advantages of LRC/liquid carbon dioxide (LCO2) slurries by: Conducting plant-wide technical and economic simulations.

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Hydrogen Technology Validation as a "Learning Demonstration" that Feeds the R&D Process (Presentation)  

DOE Green Energy (OSTI)

This presentation, which provides information about how hydrogen technology validation is used as a learning demonstration that feeds the research and development process, was given at a National Hydrogen Association meeting in April 2004.

Wipke, K.; Gronich, S.; Hooker, D.

2004-04-01T23:59:59.000Z

302

Flaxseed in Human Nutrition, 2nd EditionChapter 24 Effects of Feeding Flaxseed to Pigs  

Science Conference Proceedings (OSTI)

Flaxseed in Human Nutrition, 2nd Edition Chapter 24 Effects of Feeding Flaxseed to Pigs Food Science Health Nutrition Biochemistry eChapters Food Science & Technology Health - Nutrition - Biochemistry Press Downloadabl

303

Tank waste remediation system retrieval and disposal mission waste feed delivery plan  

Science Conference Proceedings (OSTI)

This document is a plan presenting the objectives, organization, and management and technical approaches for the Waste Feed Delivery (WFD) Program. This WFD Plan focuses on the Tank Waste Remediation System (TWRS) Project`s Waste Retrieval and Disposal Mission.

Potter, R.D.

1998-01-08T23:59:59.000Z

304

Metagenomic and functional analysis of hindgut microbiota of a wood-feeding higher termite  

E-Print Network (OSTI)

and western branches of the Wood/Ljungdahl pathway: how the1993). 55. Wood, T. Preparation of crystalline,of hindgut microbiota of a wood-feeding higher termite Falk

Warnecke, Falk

2008-01-01T23:59:59.000Z

305

ANALYSIS OF THE SALT FEED TANK CORE SAMPLE  

Science Conference Proceedings (OSTI)

The Saltstone Production Facility (SPF) immobilizes and disposes of low-level radioactive and hazardous liquid waste (salt solution) remaining from the processing of radioactive material at the Savannah River Site (SRS). Low-level waste (LLW) streams from processes at SRS are stored in Tank 50 until the LLW can be transferred to the SPF for treatment and disposal. The Salt Feed Tank (SFT) at the Saltstone Production Facility (SPF) holds approximately 6500 gallons of low level waste from Tank 50 as well as drain water returned from the Saltstone Disposal Facility (SDF) vaults. Over the past several years, Saltstone Engineering has noted the accumulation of solids in the SFT. The solids are causing issues with pump performance, agitator performance, density/level monitoring, as well as taking up volume in the tank. The tank has been sounded at the same location multiple times to determine the level of the solids. The readings have been 12, 25 and 15 inches. The SFT is 8.5 feet high and 12 feet in diameter, therefore the solids account for approximately 10 % of the tank volume. Saltstone Engineering has unsuccessfully attempted to obtain scrape samples of the solids for analysis. As a result, Savannah River National Laboratory (SRNL) was tasked with developing a soft core sampler to obtain a sample of the solids and to analyze the core sample to aid in determining a path forward for removing the solids from the SFT. The source of the material in the SFT is the drain water return system where excess liquid from the Saltstone disposal vaults is pumped back to the SFT for reprocessing. It has been shown that fresh grout from the vault enter the drain water system piping. Once these grout solids return to the SFT, they settle in the tank, set up, and can't be reprocessed, causing buildup in the tank over time. The composition of the material indicates that it is potentially toxic for chromium and mercury and the primary radionuclide is cesium-137. Qualitative measurements show that the material is not cohesive and will break apart with some force.

Reigel, M.; Cheng, W.

2012-01-26T23:59:59.000Z

306

Animal feed compositions containing phytase derived from transgenic alfalfa and methods of use thereof  

DOE Patents (OSTI)

A value-added composition of matter containing plant matter from transgenic alfalfa which expresses exogenous phytase activity is disclosed. The phytase activity is a gene product of an exogenous gene encoding for phytase which has been stably incorporated into the genome of alfalfa plants. The transgenic alfalfa expresses phytase activity in nutritionally-significant amounts, thereby enabling its use in animal feeds to eliminate the need for phosphorous supplementation of livestock, poultry, and fish feed rations.

Austin-Phillips, Sandra (Madison, WI); Koegel, Richard G. (Madison, WI); Straub, Richard J. (Brooklyn, WI); Cook, Mark (Madison, WI)

1999-01-01T23:59:59.000Z

307

Animal feed compositions containing phytase derived from transgenic alfalfa and methods of use thereof  

DOE Patents (OSTI)

A value-added composition of matter containing plant matter from transgenic alfalfa which expresses exogenous phytase activity is disclosed. The phytase activity is a gene product of an exogenous gene encoding for phytase which has been stably incorporated into the genome of alfalfa plants. The transgenic alfalfa expresses phytase activity in nutritionally-significant amounts, thereby enabling its use in animal feeds to eliminate the need for phosphorous supplementation of livestock, poultry, and fish feed rations.

Austin-Phillips, Sandra (Madison, WI); Koegel, Richard G. (Madison, WI); Straub, Richard J. (Brooklyn, WI); Cook, Mark (Madison, WI)

2001-01-01T23:59:59.000Z

308

Laboratory-Scale Melter for Determination of Melting Rate of Waste Glass Feeds  

Science Conference Proceedings (OSTI)

The purpose of this study was to develop the laboratory-scale melter (LSM) as a quick and inexpensive method to determine the processing rate of various waste glass slurry feeds. The LSM uses a 3 or 4 in. diameter-fused quartz crucible with feed and off-gas ports on top. This LSM setup allows cold-cap formation above the molten glass to be directly monitored to obtain a steady-state melting rate of the waste glass feeds. The melting rate data from extensive scaled-melter tests with Hanford Site high-level wastes performed for the Hanford Tank Waste Treatment and Immobilization Plant have been compiled. Preliminary empirical model that expresses the melting rate as a function of bubbling rate and glass yield were developed from the compiled database. The two waste glass feeds with most melter run data were selected for detailed evaluation and model development and for the LSM tests so the melting rates obtained from LSM tests can be compared with those from scaled-melter tests. The present LSM results suggest the LSM setup can be used to determine the glass production rates for the development of new glass compositions or feed makeups that are designed to increase the processing rate of the slurry feeds.

Kim, Dong-Sang; Schweiger, Michael J.; Buchmiller, William C.; Matyas, Josef

2012-01-09T23:59:59.000Z

309

Feed the Future Bangladesh: Baseline Integrated Household Survey | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed the Future Bangladesh: Baseline Integrated Household Survey Feed the Future Bangladesh: Baseline Integrated Household Survey Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS COLLABORATE ABOUT Agriculture You are here Data.gov » Communities » Agriculture » Data Feed the Future Bangladesh: Baseline Integrated Household Survey Dataset Summary Description The Bangladesh Integrated Household Survey dataset is a thorough assessment of current standard of food security in Bangladesh taken from 2011-2012. The dataset includes all baseline household surveys made under the USAID-led Feed the Future initiative, a collaborative effort that supports country-owned processes and plans for improving food security and promoting transparency, and within the Zones of Influence as outlined by the Feed the Future Bangladesh plan .The BIHS sample is statistically representative at the following levels: (a) nationally representative of rural Bangladesh; (b) representative of rural areas of each of the seven administrative divisions of the country; and, (c) representative of the Feed the Future (FTF) zone of influence.

310

National Bioenergy Center: Laying the Foundation for Biorefineries  

DOE Green Energy (OSTI)

A fact sheet explaining the National Bioenergy Center and its programs to stakeholders and visitors: An inclusive center without walls applying resources of the U.S. Department of Energy Laboratory System to advance technology for producing fuels, chemicals, materials, and power from biomass. National Bioenergy Center expertise, capabilities, facilities, and technologies can be made available to you through cooperative research and development agreements, work-for-others agreements, licenses, and other collaborative business arrangements. Please contact us about the research and development work you want to do.

Not Available

2005-08-01T23:59:59.000Z

311

Sustainable bioethanol production combining biorefinery principles and intercropping  

E-Print Network (OSTI)

of intercropping is that the intercrop components composition can be designed to produce a medium (for microbial. Nitrogen fertilization is responsible for more than 85 % of the greenhouse gas emissions from wheat grain unheated clover-grass juice can be co-converted into ethanol by natural enzymes and yeast increasing

312

National Biorefineries Database

Open Energy Info (EERE)

positions to the plant locations and transloading terminals in order to generate the shape files.

313

Biorefinery Concept Development Based on Wheat Flour Milling  

SciTech Connect

We are developing an innovative process for the recovery of a starch-rich product from millfeed (the low-value byproduct of wheat flour milling); enzymatic processing of the starch to glucose; and the subsequent processes for conversion of that glucose into a value-added product by either a catalytic or a fermentation process. We have completed the development of the starch recovery step with enzymatic processing and the assessment of its economic viability. The processes to use the glucose product as feedstock for catalytic processing and fermentation processing have been tested in the laboratory. Catalytic processing of the glucose from the extracted starch for polyol production is based on catalytic hydrogenation to sorbitol. Alternatively, fermentation of the extracted starch-derived glucose also provides a pathway to value-added chemical products via a platform chemical, lactic acid. The paper includes results from all the processing areas addressed. Starch extraction and glucose generation from wheat milling byproducts are presented with laboratory and scaled-up processing results. Results of fermentation of the glucose product to lactic acid in shaker flask tests are presented, documenting the minimal requirements for nutrient addition. Stirred batch reactor tests of catalytic hydrogenation of the glucose product to sorbitol are presented with a discussion of contaminant effects on the catalyst.

Elliott, Douglas C.; Orth, Rick J.; Werpy, Todd A.; Gao, Johnway; Eakin, David E.; Schmidt, Andrew J.; Neuenschwander, Gary G.; Murry, J; Flagg, Anthony; Lahman, L; Mennel, D; Lin, C J.; Landucci, Ron; Crockett, John; Peterson, Charles L.

2002-09-22T23:59:59.000Z

314

Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

fuel. Once fully operational, the center will produce up to eight million gallons of bioethanol per year. It will also generate six megawatts of electricity -- enough to run the...

315

The Wood-Based Biorefinery in a Petroleum Depleted World  

E-Print Network (OSTI)

;7 7 The Petroleum Product Portfolio Propane Natural gas Diesel Fuel Heating Oil Hydrogen Solvents Foundation of SUNY Biomass and Other Power Systems 9890.257US Grid Ave 1030.3Wind 604.3BIPV 529.9Willow

Chatterjee, Avik P.

316

The new Integrated Biorefinery Research Facility (IBRF) offers an unprecedented  

E-Print Network (OSTI)

., "SNG From Refuse and Sewage Sludge by the BIOGAS® Process, " Symposium on Clean Fuels From Biomas

317

Supply Chain Challenges Associated with Forest Biorefinery Implementation  

E-Print Network (OSTI)

Biochar Printed on recycled paper U.S. Department of the Interior U.S. Geological Survey Fact Sheet 2010­3117 January 2011 Biochar for Soil Fertility and Natural Carbon Sequestration Biochar is charcoal fertility while providing natural carbon sequestration. The incorporation of biochar into soils can preserve

Grossmann, Ignacio E.

318

Turning Waste Into Fuel: How the INEOS Biorefinery Is Changing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Center is expected to support 380 direct and indirect jobs -- including 175 construction jobs -- and 50 full-time positions once fully operational. Planning for other facilities...

319

Modeling Tomorrow's Biorefinery--the NREL Biochemical Pilot Plant  

DOE Green Energy (OSTI)

Brochure describing the capabilities of NREL's Biochemical Pilot Plant. In this facility, researchers test ideas for creating high-value products from cellulosic biomass.

Not Available

2008-03-01T23:59:59.000Z

320

Measuring and moderating the water resource impact of biofuel production and trade  

E-Print Network (OSTI)

and fermentation. Biorefineries consume water of biomass removal. Biorefineries can also improve and design of biorefineries will minimize conflicts

Fingerman, Kevin Robert

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

The feeding biomechanics of juvenile red snapper (Lutjanus campechanus) from the northwestern Gulf of Mexico  

E-Print Network (OSTI)

Juvenile red snapper are attracted to structure and settle onto low profile reefs, which serve as nursery grounds. Little is known about their life history during this time. However, recent studies from a shell bank in the NW Gulf of Mexico have shown higher growth rates for juveniles located on mud habitats adjacent to low profile reefs, perhaps due to varied prey availability and abundance. To further investigate the habitat needs of juvenile red snapper, individuals were collected from a low profile shell ridge (on-ridge) and adjacent mud areas (off-ridge) on Freeport Rocks, TX, and divided into three size classes (?3.9 cm SL, 4.0-5.9 cm SL, ?6 cm SL). Feeding morphology and kinematics were characterized and compared among size classes and between the two habitats. A dynamic jaw lever model was used to make predictions about feeding mechanics, and kinematic profiles obtained from high-speed videos of prey capture events validated the models predictive ability. Model output suggested an ontogenetic shift in feeding morphology from a juvenile feeding mode (more suction) to an adult feeding mode (more biting). Stomach contents revealed a concomitant shift in prey composition that coincided with the ontogenetic shift in feeding mode. The model also predicted that on-ridge juveniles would have faster jaw closing velocities compared to off-ridge juveniles, which had slower, stronger jaws. Analysis of prey capture events indicated that on-ridge juveniles demonstrated greater velocities and larger displacements of the jaws than off-ridge juveniles. Shape analysis was used to further investigate habitat effects on morphology. Off-ridge juveniles differed from on-ridge in possessing a deeper head and body. Results from model simulations, kinematic profiles, personal observations, and shape analysis all complement the conclusion that on-ridge juveniles exhibited more suction feeding behavior, whereas off-ridge juveniles used more biting behavior. Stomach contents demonstrated an early switch to piscivory in off-ridge juveniles compared to on-ridge juveniles, which may account for higher off-ridge growth rates. Habitat disparity, perhaps available prey composition, generated variations in juvenile feeding mechanics and consequently feeding behavior. This disparity may ultimately affect the growth rates and recruitment success of juvenile red snapper from different habitats.

Case, Janelle Elaine

2007-05-01T23:59:59.000Z

322

Interaction of temperature, dissolved oxygen and feed energy on ecophysiological performance of juvenile red drum  

E-Print Network (OSTI)

The red drum (Sciaenops ocellatus) is important for recreational fishing and aquacultural production in Texas' coastal waters and elsewhere in the nearshore Gulf of Mexico and in subtemperate to subtropical areas of the western North Atlantic Ocean. I performed indoor-tank and outdoor-pond experiments, in conjunction with automa ted respirometry and ecophysiological modeling, to assess interacting effects of temperature, dissolved-oxygen concentration (DO) and feed energy density on survival, growth, metabolism, and other measures of juvenile red drum performance. The main objective was to test an energy/metabolism tradeoff hypothesis, which states that growth of fish exposed to high temperatures can be limited by available feed energy; whereas, growth of fish exposed to lower temperatures can be limited by their metabolic capacity to exploit available feed energy. Also, I examined the influence of DO on this relationship and evaluated the effects of cyclical regimes of temperature and DO on fish performance. Insights from laboratory-based feeding trials were incorporated in experiments conducted in hatchery ponds to assess effects of oxygen supplementation and dietary additives - nucleotides and prebiotics - on performance in a more natural setting. In examining these issues, various technologies were developed. These included a computer-based apparatus for autonomously inducing cyclical regimes of temperature and DO in experimental tanks over an extended period of time. Additionally, I developed a soft feed with low energy-density to simulate natural forage. Experimental results supported the principal research hypothesis: At high temperature and DO, ecophysiological performance of juvenile red drum was enhanced by feeding to satiation with a high-energy feed (15.9 kJ/g) versus with a foragesimulating feed having lower energy density (4.1 kJ/g). Cyclical regimes of temperature and DO - as imposed in my particular laboratory experiments -did not impart growth benefits; however, the potential for enhanced growth via an appropriate cyclical environmental regime remains intact. Results from outdoor-pond experiments were consistent with laboratory results; however, the strong positive effect of feed energy density overwhelmed potential effects of dietary additives or oxygen supplementation on growth.

Fontaine, Lance Pierre

2008-05-01T23:59:59.000Z

323

,"U.S. Downstream Processing of Fresh Feed Input"  

U.S. Energy Information Administration (EIA) Indexed Site

Annual",2012,"6/30/1987" Annual",2012,"6/30/1987" ,"Release Date:","9/27/2013" ,"Next Release Date:","9/26/2014" ,"Excel File Name:","pet_pnp_dwns_dc_nus_mbblpd_a.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_pnp_dwns_dc_nus_mbblpd_a.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"11/25/2013 11:17:28 AM" "Back to Contents","Data 1: U.S. Downstream Processing of Fresh Feed Input" "Sourcekey","M_NA_YDR_NUS_MBBLD","MCRCCUS2","MCRCHUS2","MCRDFUS2" "Date","U.S. Downstream Processing of Fresh Feed Input by Catalytic Reforming Units (Thousand Barrels per Day)","U.S. Downstream Processing of Fresh Feed Input by Catalytic Cracking Units (Thousand Barrels per Day)","U.S. Downstream Processing of Fresh Feed Input by Catalytic Hydrocracking Units (Thousand Barrels per Day)","U.S. Downstream Processing of Fresh Feed Input by Delayed and Fluid Coking Units (Thousand Barrels per Day)"

324

HIGH-LEVEL WASTE FEED CERTIFICATION IN HANFORD DOUBLE-SHELL TANKS  

SciTech Connect

The ability to effectively mix, sample, certify, and deliver consistent batches of High Level Waste (HLW) feed from the Hanford Double Shell Tanks (DST) to the Waste Treatment and Immobilization Plant (WTP) presents a significant mission risk with potential to impact mission length and the quantity of HLW glass produced. DOE's River Protection Project (RPP) mission modeling and WTP facility modeling assume that individual 3785 cubic meter (l million gallon) HLW feed tanks are homogenously mixed, representatively sampled, and consistently delivered to the WTP. It has been demonstrated that homogenous mixing ofHLW sludge in Hanford DSTs is not likely achievable with the baseline design thereby causing representative sampling and consistent feed delivery to be more difficult. Inconsistent feed to the WTP could cause additional batch-to-batch operational adjustments that reduce operating efficiency and have the potential to increase the overall mission length. The Hanford mixing and sampling demonstration program will identify DST mixing performance capability, will evaluate representative sampling techniques, and will estimate feed batch consistency. An evaluation of demonstration program results will identify potential mission improvement considerations that will help ensure successful mission completion. This paper will discuss the history, progress, and future activities that will define and mitigate the mission risk.

THIEN MG; WELLS BE; ADAMSON DJ

2010-01-14T23:59:59.000Z

325

Center for Environment and National Security at Scripps Feed | Open Energy  

Open Energy Info (EERE)

Environment and National Security at Scripps Feed Environment and National Security at Scripps Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

326

LADWP - Feed-in Tariff (FiT) Program (California) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LADWP - Feed-in Tariff (FiT) Program (California) LADWP - Feed-in Tariff (FiT) Program (California) LADWP - Feed-in Tariff (FiT) Program (California) < Back Eligibility Commercial Fed. Government Nonprofit Residential State Government Savings Category Bioenergy Biofuels Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Solar Home Weatherization Wind Maximum Rebate $0.3825/kWh Program Info Start Date 02/01/2013 State California Program Type Performance-Based Incentive Rebate Amount $0.17/kWh adjusted by a time of delivery multiplier Base price will step down over time as certain MW goals are met Provider LADWP Note: LADWP accepted applications for the second 20 MW allocation of the 100 MW FiT Set Pricing Program between July 8 and July 12, 2013. This program is the first component of a 150 megawatt (MW) FiT Program, and is

327

Not long ago breast-feeding was considered a private affair, solely carried out  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Not long ago breast-feeding was considered a private affair, solely carried out in the Not long ago breast-feeding was considered a private affair, solely carried out in the home. But today, many mothers are choosing to continue breast-feeding after they return to work. In order for mothers to keep producing ample supplies of milk, so they can avoid using formula supplements, nursing mothers need to pump their milk during the workday. At Department of Energy Headquarters, the Wellness Program works to support employees who are devoted to their families. This includes nursing mothers who want to continue lactation after they return to the office. The Occupational Health Clinics at the Forrestal and Germantown facilities house a dedicated lactation room, well appointed with a comfortable recliner, table and access to a restroom. Mothers have access to the

328

Methods of removing a constituent from a feed stream using adsorption media  

SciTech Connect

A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving and/or suspending at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

Tranter, Troy J. (Idaho Falls, ID); Mann, Nicholas R. (Rigby, ID); Todd, Terry A. (Aberdeen, ID); Herbst, Ronald S. (Idaho Falls, ID)

2011-05-24T23:59:59.000Z

329

Recycle Waste Collection Tank (RWCT) simulant testing in the PVTD feed preparation system  

Science Conference Proceedings (OSTI)

(This is part of the radwaste vitrification program at Hanford.) RWCT was to routinely receive final canister decontamination sand blast frit and rinse water, Decontamination Waste Treatment Tank bottoms, and melter off-gas Submerged Bed Scrubber filter cake. In order to address the design needs of the RWCT system to meet performance levels, the PNL Vitrification Technology (PVTD) program used the Feed Preparation Test System (FPTS) to evaluate its equipment and performance for a simulant of RWCT slurry. (FPTS is an adaptation of the Defense Waste Processing Facility feed preparation system and represents the initially proposed Hanford Waste Vitrification Plant feed preparation system designed by Fluor-Daniel, Inc.) The following were determined: mixing performance, pump priming, pump performance, simulant flow characterization, evaporator and condenser performance, and ammonia dispersion. The RWCT test had two runs, one with and one without tank baffles.

Abrigo, G.P.; Daume, J.T.; Halstead, S.D.; Myers, R.L.; Beckette, M.R.; Freeman, C.J.; Hatchell, B.K.

1996-03-01T23:59:59.000Z

330

Ensiling wet distillers grains with other feeds. SDSU Extension Extra 4029  

E-Print Network (OSTI)

During the last century, livestock producers have relied heavily on highly valued crops to feed their cattle. Corn grain and silage, alfalfa hay and silage as well as other highly productive crops have been used extensively. Changes in oil prices have sparked interest into renewable energy alternatives. Ethanol production from corn has gained popularity in the Midwest resulting in increased availability of corn distillers grains. Corn distillers grains are an excellent feed for ruminants. They can usually be purchased as wet (40-70 % moisture) or dry. They supply approximately 10 % more energy than corn grain, and approximately 30 % protein, 10 % fat and 1 % phosphorus. These are highly priced nutrients and thus desirable in a feed, although they might pose a challenge when formulating diets. When distillers grains

A. D. Garcia; K. F. Kalscheur

2004-01-01T23:59:59.000Z

331

Tools for Management of Withering Syndrome in Abalone, Haliotis spp: PCR Detection and Feed-Based Therapeutic Treatment  

E-Print Network (OSTI)

in Abalone, Haliotis spp: PCR Detection and Feed-Basedprocessing (negative control). PCR amplification of WS-RLPDNA stool kit, perform PCR. An outline of the filtration

Friedman, Carolyn; Hedrick, R P; Moore, James D.

2003-01-01T23:59:59.000Z

332

Feed Composition for Sodium-Bearing Waste Treatment Process, Rev. 3  

SciTech Connect

Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated by a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is to complete treatment of SBW by December 31, 2012. To support both design and development studies for the SBW treatment process, detailed feed compositions are needed. This report contains the expected compositions of these feed streams and the sources and methods used in obtaining these compositions.

Barnes, Charles Marshall

2003-09-01T23:59:59.000Z

333

Detection of Tool Flute Breakage in End Milling Using Feed-Motor Current Signatures  

E-Print Network (OSTI)

In this paper, an effective algorithm based on improved time-domain averaging is proposed to detect tool flute breakage during end milling using feed-motor current signatures. The algorithm proposed is demonstrated to be effective in detecting tool flute breakage in real time through a series of milling experiments, and is also demonstrated to be insensitive to the effects for transients, such as cutter runout, entry/exit cuts, and noise in the feed-motor current signals. Results indicated that the approach showed excellent potential for practical, on-line application for tool flute breakage detection during end milling.

Xiao Li

2001-01-01T23:59:59.000Z

334

Analysis of gas centrifuge cascade for separation of multicomponent isotopes and optimal feed position  

SciTech Connect

Analysis of the concentration distribution in a gas centrifuge cascade for separation of multicomponent isotope mixtures is different from that in a cascade for separation of two-component mixtures. This paper presents the governing equations for a multicomponent isotope separation cascade. Numerically predicted separation factors for the gas centrifuge cascade agree well with the experimental data. A theoretical optimal feed position is derived for a short square cascade for a two-component mixture in a close-separation case. The optimal feed position for a gas centrifuge cascade for separation of multicomponent mixture is discussed.

Chuntong Ying; Hongjiang Wu; Mingsheng Zhou; Yuguang Nie; Guangjun Liu [Tsinghua Univ., Beijing (China)

1997-10-01T23:59:59.000Z

335

Feed and Farm Supply Store Managers' Perceptions of Employee Training as a Contributor to Competitive Advantage  

E-Print Network (OSTI)

The purpose of this study was to assess the perception held by managers of feed and farm supply stores in Texas regarding the contribution of employee training to the competitiveness of the firm, determine if managers of feed and farm supply stores perceive that employee training can improve their competitive strength, and to determine if they will invest in employee training in order to gain a competitive advantage. The objectives of this study include: describe the operating environment of feed and farm supply stores in Texas; describe feed and farm supply store managers? perception of employee training?s contribution to their firm?s competitive advantage; identify barriers to employee training in feed and farm supply stores; determine Internet availability and potential use for employee training in feed and farm supply stores; and describe the willingness of feed and farm supply store managers to engage in employee training delivered via the Internet. This study employed a descriptive and correlational research design. A selfadministered questionnaire was used to collect data from a sample frame of 305 feed and farm supply stores randomly selected from 1,487 stores in Texas. These stores operate in a demanding, competitive environment that is changing at a rapid pace. They perceive that employee training improves customer satisfaction, contributes to business growth, improves productivity, and increases profits. The skills needed by their employees are increasing and they need training in sales, communication skills, technical knowledge, time management, retail merchandising, marketing, and business management to help the business stay competitive. Barriers to training include not being able to see immediate results, cost, difficulties created when key employees are not on the job, travel distances to attend training, and a lack of training programs relevant to their needs. Over 80 percent of these stores have both computers and Internet access. Managers will allow employees to use these resources for training purposes, encourage participation in online training, and allow their employees to participate in training during business hours. It is recommended that Internet based training programs be developed in sales, communication skills, technical knowledge, time management, retail merchandising, and business management for these small agribusinesses.

Springfield, Henry C., III

2008-12-01T23:59:59.000Z

336

Dry Coal Feed System and Multi-Element Injector Test Plan  

DOE Green Energy (OSTI)

Pratt & Whitney Rocketdyne (PWR) has developed an innovative gasifier concept that uses rocket engine technology to significantly improve gasifier performance, life, and cost compared to current state-of-the-art systems. One key feature of the PWR concept is the use of an ultra-dense phase feed system to provide dry coal to the multi-element injector. This report describes the layout, test procedures, instrumentation and data acquisition requirements for an ultradense phase multi-element injector and feed system to be operated at the University of North Dakota Energy and Environmental Research Center (UNDEERC).

Ken Sprouse; Fred Widman; Alan Darby

2006-08-30T23:59:59.000Z

337

Fungal spore-feeding thrips (Thysanoptera: Phlaeothripidae: Idolothripinae) from Iran with record of a fourth genus  

E-Print Network (OSTI)

The genus Allothrips Hood, with one species A. bournieri Mound, is reported for the first time in Iran and the generic classification of Phlaeothripidae is discussed briefly. A key is provided to distinguish the four genera recorded in Iran of the spore-feeding thrips in the Idolothripinae.

Kambiz Minaei

2010-01-01T23:59:59.000Z

338

Hard prey, soft jaws and the ontogeny of feeding mechanics in the spotted ratfish  

E-Print Network (OSTI)

Hard prey, soft jaws and the ontogeny of feeding mechanics in the spotted ratfish Hydrolagus colliei is a holocephalan fish that consumes hard prey (durophagy) but lacks many morphological characters (Chondrichthyes: Holocephali) have branded them as hard prey specialists (Didier 1995; Grogan & Lund 2004

Summers, Adam P.

339

Design of RF Feed System for Standing-Wave Accelerator Structures  

Science Conference Proceedings (OSTI)

We are investigating a standing wave accelerator structure that uses a rf feed to each individual cell. This approach minimizes rf power flow and electromagnetic energy absorbed by an rf breakdown. The objective of this work is a robust high-gradient (above 100 MV/m) X-band accelerator structure.

Neilson, J.; Tantawi, S.; Dolgashev, V.; /SLAC

2012-05-25T23:59:59.000Z

340

2001-01-1334 Integrated, Feed-Forward Hybrid Electric Vehicle  

E-Print Network (OSTI)

1 2001-01-1334 Integrated, Feed-Forward Hybrid Electric Vehicle Simulation in SIMULINK and its Use of Automotive Engineers, Inc. ABSTRACT A hybrid electric vehicle simulation tool (HE-VESIM) has been developed global crude oil supplies stimulate research aimed at new, fuel-efficient vehicle technologies. Hybrid-electric

Peng, Huei

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Feed-forward and recurrent neural networks for source code informal information analysis  

Science Conference Proceedings (OSTI)

Design recovery, which is a part of the reverse engineering process of source code, must supply programmers with all the information they need to fully understand a program or a system. In this paper, a connectionist method that can be used for design ... Keywords: design recovery, feed-forward networks, informal information analysis, program understanding, recurrent neural networks

Ettore Merlo; Ian McAdam; Renato De Mori

2003-07-01T23:59:59.000Z

342

Prediction of the index fund by Takagi-Sugeno fuzzy inference systems and feed-forward neural network  

Science Conference Proceedings (OSTI)

The paper presents (on the basis of passive investment strategies analysis) the design of the Takagi-Sugeno fuzzy inference system and the feed-forward neural network (with pre-processing of inputs time series) for prediction of the index fund. By means ... Keywords: Takagi-Sugeno fuzzy inference systems, feed-forward neural network, index fund, indicators of technical analysis, prediction

Vladr Olej

2006-02-01T23:59:59.000Z

343

Load requirements for maintaining structural integrity of Hanford single-shell tanks during waste feed delivery and retrieval activities  

Science Conference Proceedings (OSTI)

This document provides structural load requirements and their basis for maintaining the structural integrity of the Hanford Single-Shell Tanks during waste feed delivery and retrieval activities. The requirements are based on a review of previous requirements and their basis documents as well as load histories with particular emphasis on the proposed lead transfer feed tanks for the privatized vitrification plant.

JULYK, L.J.

1999-09-22T23:59:59.000Z

344

Demonstration of a Piston Plug feed System for Feeding Coal/Biomass Mixtures across a Pressure Gradient for Application to a Commercial CBTL System  

DOE Green Energy (OSTI)

Producing liquid transportation fuels and power via coal and biomass to liquids (CBTL) and integrated gasification combined cycle (IGCC) processes can significantly improve the nation's energy security. The Energy Independence and Security Act of 2007 mandates increasing renewable fuels nearly 10-fold to >2.3 million barrels per day by 2022. Coal is abundantly available and coal to liquids (CTL) plants can be deployed today, but they will not become sustainable without large scale CO{sub 2} capture and storage. Co-processing of coal and biomass in CBTL processes in a 60 to 40 ratio is an attractive option that has the potential to produce 4 million barrels of transportation fuels per day by 2020 at the same level of CO{sub 2} emission as petroleum. In this work, Southern Research Institute (Southern) has made an attempt to address one of the major barriers to the development of large scale CBTL processes - cost effective/reliable dry-feeding of coal-biomass mixtures into a high pressure vessel representative of commercial entrained-flow gasifiers. Present method for dry coal feeding involves the use of pressurized lock-hopper arrangements that are not only very expensive with large space requirements but also have not been proven for reliably feeding coal-biomass mixtures without the potential problems of segregation and bridging. The project involved the development of a pilot-scale 250 lb/h high pressure dry coal-biomass mixture feeder provided by TKEnergi and proven for feeding biomass at a scale up to 6 ton/day. The aim of this project is to demonstrate cost effective feeding of coal-biomass mixtures (50:50 to 70:30) made from a variety of coals (bituminous, lignite) and biomass (wood, corn stover, switch grass). The feeder uses a hydraulic piston-based approach to produce a series of plugs of the mixture that act as a seal against high back-pressure of the gasification vessel in to which the mixture is being fed. The plugs are then fed one by one via a plug breaker into the high pressure gasification vessel. A number of runs involving the feeding of coal and biomass mixtures containing 50 to 70 weight % coal into a high pressure gasification vessel simulator have shown that plugs of sufficient density can be formed to provide a seal against pressures up to 450 psig if homogeneity of the mixture can be maintained. However, the in-homogeneity of coal-biomass mixtures can occur during the mixing process because of density, particle size and moisture differences. Also, the much lower compressibility of coal as opposed to biomass can contribute to non-uniform plug formation which can result in weak plugs. Based on present information, the piston plug feeder offered marginal economic advantages over lock-hoppers. The results suggest a modification to the piston feeder that can potentially seal against pressure without the need for forming plugs. This modified design could result in lower power requirements and potentially better economics.

Santosh Gangwal

2011-06-30T23:59:59.000Z

345

A summary report on feed preparation offgas and glass redox data for Hanford waste vitrification plant: Letter report  

DOE Green Energy (OSTI)

Tests to evaluate feed processing options for the Hanford Waste Vitrification Plant (HWVP) were conducted by a number of investigators, and considerable data were acquired for tests of different scale, including recent full-scale tests. In this report, a comparison was made of the characteristics of feed preparation observed in tests of scale ranging from 57 ml to full-scale of 28,000 liters. These tests included Pacific Northwest Laboratory (PNL) laboratory-scale tests, Kernforschungszentrums Karlsruhe (KfK) melter feed preparation, Research Scale Melter (RSM) feed preparation, Integrated DWPF Melter System (IDMS) feed preparation, Slurry Integrated Performance Testing (SIPT) feed preparation, and formic acid addition to Hanford Neutralized Current Acid Waste (NCAW) care samples.` The data presented herein were drawn mainly from draft reports and include system characteristics such as slurry volume and depth, sweep gas flow rate, headspace, and heating and stirring characteristics. Operating conditions such as acid feed rate, temperature, starting pH, final pH, quantities and type of frit, nitrite, nitrate, and carbonate concentrations, noble metal content, and waste oxide loading were tabulated. Offgas data for CO{sub 2}, NO{sub x}, N{sub 2}O, NO{sub 2}, H{sub 2} and NH{sub 3} were tabulated on a common basis. Observation and non-observation of other species were also noted.

Merz, M.D.

1996-03-01T23:59:59.000Z

346

MILKY WAY SUPERMASSIVE BLACK HOLE: DYNAMICAL FEEDING FROM THE CIRCUMNUCLEAR ENVIRONMENT  

SciTech Connect

The supermassive black hole (SMBH), Sgr A*, at the Galactic center is surrounded by a molecular circumnuclear disk (CND) lying between 1.5 and 4 pc radii. The irregular and clumpy structures of the CND suggest dynamical evolution and episodic feeding of gas toward the central SMBH. New sensitive data from the Submillimeter Array and Green Bank Telescope reveal several >5-10 pc scale molecular arms, which either directly connect to the CND or may penetrate inside the CND. The CND appears to be the convergence of the innermost parts of large-scale gas streamers, which are responding to the central gravitational potential well. Rather than being a quasi-stationary structure, the CND may be dynamically evolving, incorporating inflow via streamers, and feeding gas toward the center.

Liu, Hauyu Baobab; Hsieh, Pei-Ying; Ho, Paul T. P.; Su, Yu-Nung [Academia Sinica Institute of Astronomy and Astrophysics, P.O. Box 23-141, Taipei, 106 Taiwan (China); Wright, Melvyn [Radio Astronomy Laboratory, University of California, Berkeley 601 Campbell Hall, Berkeley, CA 94720 (United States); Sun, Ai-Lei [Department of Astrophysical Sciences, Peyton Hall, Princeton University, Princeton, NJ 08544 (United States); Minh, Young Chol, E-mail: hlu@cfa.havard.edu [Korea Astronomy and Space Science Institute (KASI), 776 Daeduk-daero, Yuseong, Daejeon 305-348 (Korea, Republic of)

2012-09-10T23:59:59.000Z

347

Feed-in Tariff Policy: Design, Implementation, and RPS Policy Interactions  

NLE Websites -- All DOE Office Websites (Extended Search)

549 549 March 2009 Feed-in Tariff Policy: Design, Implementation, and RPS Policy Interactions Karlynn Cory, Toby Couture, and Claire Kreycik National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Technical Report NREL/TP-6A2-45549 March 2009 Feed-in Tariff Policy: Design, Implementation, and RPS Policy Interactions Karlynn Cory, Toby Couture, and Claire Kreycik Prepared under Task No. PVB9.4210 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

348

A Catalyst Wire-feed Arc Discharge for Synthesis of Carbon Nanotubes and  

NLE Websites -- All DOE Office Websites (Extended Search)

A Catalyst Wire-feed Arc Discharge for Synthesis of Carbon Nanotubes and A Catalyst Wire-feed Arc Discharge for Synthesis of Carbon Nanotubes and Graphene Particles This invention pertains to a highly effective arc-based synthesis of single wall carbon nanotubes and graphene particles using catalysts in the form of wires made from ion group alloys instead of commonly used catalyst powders. The catalyst wire can be introduced into the discharge either from the anode or cathode regions or into the inter-electrode gap. The catalyst introduction can be done automatically and controlled using feedback based on the ablation of the graphite electrode. To maintain simplicity and attractiveness for industrial applications, it is desirable that the catalyst composition be contained in a single wire alloy. No.: M-808 Inventor(s): Yevgeny Raitses

349

The Relevance of Generation Interconnection Procedures to Feed-in Tariffs in the United States  

NLE Websites -- All DOE Office Websites (Extended Search)

The Relevance of Generation The Relevance of Generation Interconnection Procedures to Feed-in Tariffs in the United States Sari Fink, Kevin Porter, and Jennifer Rogers Exeter Associates, Inc. Columbia, Maryland Subcontract Report NREL/SR-6A20-48987 October 2010 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 The Relevance of Generation Interconnection Procedures to Feed-in Tariffs in the United States Sari Fink, Kevin Porter, and Jennifer Rogers Exeter Associates, Inc. Columbia, Maryland

350

Redox Control For Hanford HLW Feeds VSL-12R2530-1, REV 0  

SciTech Connect

The principal objectives of this work were to investigate the effects of processing simulated Hanford HLW at the estimated maximum concentrations of nitrates and oxalates and to identify strategies to mitigate any processing issues resulting from high concentrations of nitrates and oxalates. This report provides results for a series of tests that were performed on the DM10 melter system with simulated C-106/AY-102 HLW. The tests employed simulated HLW feeds containing variable amounts of nitrates and waste organic compounds corresponding to maximum concentrations proj ected for Hanford HLW streams in order to determine their effects on glass production rate, processing characteristics, glass redox conditions, melt pool foaming, and the tendency to form secondary phases. Such melter tests provide information on key process factors such as feed processing behavior, dynamic effects during processing, processing rates, off-gas amounts and compositions, foaming control, etc., that cannot be reliably obtained from crucible melts.

Kruger, A. A. [Department of Energy, Office of River Protection, Richland, Washington (United States); Matlack, Keith S. [The Catholic University of America, Washington, DC (United States); Pegg, Ian L. [The Catholic University of America, Washington, DC (United States); Kot, Wing K. [The Catholic University of America, Washington, DC (United States); Joseph, Innocent [The Catholic University of America, Washington, DC (United States)

2012-12-13T23:59:59.000Z

351

Feed-in Tariff Policy: Design, Implementation, and RPS Policy Interactions  

Science Conference Proceedings (OSTI)

Feed-in tariff (FIT) policies are implemented in more than 40 countries around the world and are cited as the primary reason for the success of the German and Spanish renewable energy markets. As a result of that success, FIT policy proposals are starting to gain traction in several U.S. states and municipalities. Experience from Europe is also beginning to demonstrate that properly designed FITs may be more cost-effective than renewable portfolio standards (RPS), which make use of competitive solicitations. This article explores the design and operation of feed-in tariff policies, including a FIT policy definition, payment-structure options, and payment differentiation. The article also touches on the potential interactions between FIT policies and RPS policies at the state level.

Cory, K.; Couture, T.; Kreycik, C.

2009-03-01T23:59:59.000Z

352

Electronically controllable transmission line design for traveling wave array antenna feed network  

E-Print Network (OSTI)

In this thesis, an electronically controllable transmission line (ECTL) is presented. By modulating the conductivity of a doped Si modulator in the ECTL, the wave propagation constant in the ECTL is controlled. Measured results show a phase change in the ECTL at a single frequency when non-zero bias voltage is applied. This ECTL is implemented in order to feed a traveling wave array antenna, which is composed of 8 aperture-coupled microstrip antenna elements. It is demonstrated that phase change in an ECTL feed line has applications as a traveling wave array antenna with beam steering. S-parameter measurements are presented which demonstrate phase change in an ECTL and main beam steering of an 8-element traveling wave array antenna. The design procedure for an aperture-coupled microstrip antenna with a specific input impedance at the resonant frequency and a matching circuit design for a traveling wave array antenna are discussed in detail.

Shin, Chang-Seok

2002-01-01T23:59:59.000Z

353

Calcination of Fluorinel-sodium waste blends using sugar as a feed additive (formerly WINCO-11879)  

SciTech Connect

Methods were studied for using sugar as a feed additive for converting the sodium-bearing wastes stored at the Idaho Chemical Processing Plant into granular, free flowing solids by fluidized-bed calcination at 500{degrees}C. All methods studied blended sodium-bearing wastes with Fluorinel wastes but differed in the types of sugar (sucrose or dextrose) that were added to the blend. The most promising sugar additive was determined to be sucrose, since it is converted more completely to inorganic carbon than is dextrose. The effect of the feed aluminum-to-alkali metal mole ratio on calcination of these blends with sugar was also investigated. Increasing the aluminum-to-alkali metal ratio from 0.6 to 1.0 decreased the calcine product-to-fines ratio from 3.0 to 1.0 and the attrition index from 80 to 15%. Further increasing the ratio to 1.25 had no effect.

Newby, B.J.; Thomson, T.D.; O`Brien, B.H.

1992-06-01T23:59:59.000Z

354

Liquid over-feeding refrigeration system and method with integrated accumulator-expander-heat exchanger  

DOE Patents (OSTI)

A refrigeration system is described having a vapor compression cycle utilizing a liquid over-feeding operation with an integrated accumulator-expander-heat exchanger. Hot, high-pressure liquid refrigerant from the condenser passes through one or more lengths of capillary tubing substantially immersed in a pool liquid refrigerant in the accumulator-expander-heat exchanger for simultaneously sub-cooling and expanding the liquid refrigerant while vaporizing liquid refrigerant from the pool for the return thereof to the compressor as saturated vapor. The sub-cooling of the expanded liquid provides for the flow of liquid refrigerant into the evaporator for liquid over-feeding the evaporator and thereby increasing the efficiency of the evaporation cycle. 4 figs.

Mei, V.C.; Chen, F.C.

1997-04-22T23:59:59.000Z

355

FEED SYSTEM INNOVATION FOR GASIFICATION OF LOCALLY ECONOMICAL ALTERNATIVE FUELS (FIGLEAF)  

DOE Green Energy (OSTI)

The Feed System Innovation for Gasification of Locally Economical Alternative Fuels (FIGLEAF) project was conducted by the Energy & Environmental Research Center and Gasification Engineering Corporation of Houston, Texas (a subsidiary of Global Energy Inc., Cincinnati, Ohio), with 80% cofunding from the U.S. Department of Energy (DOE). The goal of the project was to identify and evaluate low-value fuels that could serve as alternative feedstocks and to develop a feed system to facilitate their use in integrated gasification combined-cycle and gasification coproduction facilities. The long-term goal, to be accomplished in a subsequent project, is to install a feed system for the selected fuel(s) at Global Energy's commercial-scale 262-MW Wabash River Coal Gasification Facility in West Terre Haute, Indiana. The feasibility study undertaken for the project consisted of identifying and evaluating the economic feasibility of potential fuel sources, developing a feed system design capable of providing a fuel at 400 psig to the second stage of the E-Gas (Destec) gasifier to be cogasified with coal, performing bench- and pilot-scale testing to verify concepts and clarify decision-based options, reviewing information on high-pressure feed system designs, and determining the economics of cofeeding alternative feedstocks with the conceptual feed system design. A preliminary assessment of feedstock availability within Indiana and Illinois was conducted. Feedstocks evaluated included those with potential tipping fees to offset processing cost: sewage sludge, municipal solid waste, used railroad ties, urban wood waste (UWW), and used tires/tire-derived fuel. Agricultural residues and dedicated energy crop fuels were not considered since they would have a net positive cost to the plant. Based on the feedstock assessment, sewage sludge was selected as the primary feedstock for consideration at the Wabash River Plant. Because of the limited waste heat available for drying and the ability of the gasifier to operate with alternative feedstocks at up to 80% moisture, a decision was made to investigate a pumping system for delivering the as-received fuel across the pressure boundary into the second stage of the gasifier. A high-pressure feed pump and fuel dispersion nozzles were tested for their ability to cross the pressure boundary and adequately disperse the sludge into the second stage of the gasifier. These results suggest that it is technically feasible to get the sludge dispersed to an appropriate size into the second stage of the gasifier although the recycle syngas pressure needed to disperse the sludge would be higher than originally desired. A preliminary design was prepared for a sludge-receiving, storage, and high-pressure feeding system at the Wabash River Plant. The installed capital costs were estimated at approximately $9.7 million, within an accuracy of {+-}10%. An economic analysis using DOE's IGCC Model, Version 3 spreadsheet indicates that in order to justify the additional capital cost of the system, Global Energy would have to receive a tipping fee of $12.40 per wet ton of municipal sludge delivered. This is based on operation with petroleum coke as the primary fuel. Similarly, with coal as the primary fuel, a minimum tipping of $16.70 would be required. The availability of delivered sludge from Indianapolis, Indiana, in this tipping-fee range is unlikely; however, given the higher treatment costs associated with sludge treatment in Chicago, Illinois, delivery of sludge from Chicago, given adequate rail access, might be economically viable.

Michael L. Swanson; Mark A. Musich; Darren D. Schmidt; Joseph K. Schultz

2003-02-01T23:59:59.000Z

356

Method of monitoring CO concentrations in hydrogen feed to a PEM fuel cell  

DOE Green Energy (OSTI)

The CO concentration in the H.sub.2 feed stream to a PEM fuel cell stack is monitored by measuring current and/or voltage behavior patterns from a PEM-probe communicating with the reformate feed stream. Pattern recognition software may be used to compare the current and voltage patterns from the PEM-probe to current and voltage telltale outputs determined from a reference cell similar to the PEM-probe and operated under controlled conditions over a wide range of CO concentrations in the H.sub.2 fuel stream. The PEM-probe is intermittently purged of any CO build-up on the anode catalyst (e.g., by (1) flushing the anode with air, (2) short circuiting the PEM-probe, or (3) reverse biasing the PEM-probe) to keep the PEM-probe at peak performance levels.

Grot, Stephen Andreas (Rochester, NY); Meltser, Mark Alexander (Pittsford, NY); Gutowski, Stanley (Pittsford, NY); Neutzler, Jay Kevin (Rochester, NY); Borup, Rodney Lynn (East Rochester, NY); Weisbrod, Kirk (Los Alamos, NM)

2000-01-01T23:59:59.000Z

357

Liquid over-feeding refrigeration system and method with integrated accumulator-expander-heat exchanger  

DOE Patents (OSTI)

A refrigeration system having a vapor compression cycle utilizing a liquid over-feeding operation with an integrated accumulator-expander-heat exchanger. Hot, high-pressure liquid refrigerant from the condenser passes through one or more lengths of capillary tubing substantially immersed in a pool liquid refrigerant in the accumulator-expander-heat exchanger for simultaneously sub-cooling and expanding the liquid refrigerant while vaporizing liquid refrigerant from the pool for the return thereof to the compressor as saturated vapor. The sub-cooling of the expanded liquid provides for the flow of liquid refrigerant into the evaporator for liquid over-feeding the evaporator and thereby increasing the efficiency of the evaporation cycle.

Mei, Viung C. (Oak Ridge, TN); Chen, Fang C. (Knoxville, TN)

1997-01-01T23:59:59.000Z

358

Renewable wood fuel: Fuel feed system for a pulverized coal boiler. Final report  

DOE Green Energy (OSTI)

This report evaluates a pilot test program conducted by New York State Gas & Electric Corporation to evaluate the feasibility of co-firing a pulverized coal plant with renewable wood fuels. The goal was to establish that such a co-firing system can reduce air emissions while maintaining good operational procedures and cost controls. The test fuel feed system employed at Greenidge Station`s Boiler 6 was shown to be effective in feeding wood products. Emission results were promising and an economic analysis indicates that it will be beneficial to pursue further refinements to the equipment and systems. The report recommends further evaluation of the generation and emission impacts using woods of varied moisture contents and at varied Btu input rates to determine if a drying system would be a cost-effective option.

NONE

1996-01-01T23:59:59.000Z

359

Field Testing LIDAR Based Feed-Forward Controls on the NREL Controls Advanced Research Turbine: Preprint  

DOE Green Energy (OSTI)

Wind turbines are complex, nonlinear, dynamic systems driven by aerodynamic, gravitational, centrifugal, and gyroscopic forces. The aerodynamics of wind turbines are nonlinear, unsteady, and complex. Turbine rotors are subjected to a chaotic three-dimensional (3-D) turbulent wind inflow field with imbedded coherent vortices that drive fatigue loads and reduce lifetime. In order to reduce cost of energy, future large multimegawatt turbines must be designed with lighter weight structures, using active controls to mitigate fatigue loads, maximize energy capture, and add active damping to maintain stability for these dynamically active structures operating in a complex environment. Researchers at the National Renewable Energy Laboratory (NREL) and University of Stuttgart are designing, implementing, and testing advanced feed-back and feed-forward controls in order to reduce the cost of energy for wind turbines.

Scholbrock, A. K.; Fleming, P. A.; Fingersh, L. J.; Wright, A. D.; Schlipf, D.; Haizmann, F.; Belen, F.

2013-01-01T23:59:59.000Z

360

Alternatives generation and analysis for the Phase I intermediate waste feed staging system design requirements  

SciTech Connect

This alternatives generation and analysis (AGA) addresses the question: What is the design basis for the facilities required to stage low-level waste (LLW) feed to the Phase I private contractors? Alternative designs for the intermediate waste feed staging system were developed, analyzed, and compared. Based on these analyses, this document recommends installing mixer pumps in the central pump pit of double-shell tanks 241-AP-102 and 241-AP-104. Also recommended is installing decant/transfer pumps at these tanks. These recommendations have clear advantages in that they provide a low shedule impact/risk and the highest operability of all the alternatives investigated. This revision incorporates comments from the decision board.

Claghorn, R.D., Fluor Daniel Hanford

1997-02-06T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Model for trace metal exposure in filter-feeding flamingos at alkaline Rift Valley Lake, Kenya  

SciTech Connect

Toxic trace metals have been implicated as a potential cause of recent flamingo kills at Lake Nakuru, Kenya. Chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) have accumulated in the lake sediments as a result of unregulated discharges and because this alkaline lake has no natural outlet. Lesser flamingos (Phoeniconaias minor) at Lake Nakuru feed predominantly on the cyanobacterium Spirulina platensis, and because of their filter-feeding mechanism, they are susceptible to exposure to particle-bound metals. Trace metal adsorption isotherms to lake sediments and S. platensis were obtained under simulated lake conditions, and a mathematical model was developed to predict metal exposure via filter feeding based on predicted trace metal phase distribution. Metal adsorption to suspended solids followed the trend Pb {much_gt} Zn > Cr > Cu, and isotherms were linear up to 60 {micro}g/L. Adsorption to S. platensis cells followed the trend Pb {much_gt} Zn > Cu > Cr and fit Langmuir isotherms for Cr, Cu and Zn and a linear isotherm for Pb. Predicted phase distributions indicated that Cr and Pb in Lake Nakuru are predominantly associated with suspended solids, whereas Cu and Zn are distributed more evenly between the dissolved phase and particulate phases of both S. platensis and suspended solids. Based on established flamingo feeding rates and particle size selection, predicted Cr and Pb exposure occurs predominantly through ingestion of suspended solids, whereas Cu and Zn exposure occurs through ingestion of both suspended solids and S. platensis. For the lake conditions at the time of sampling, predicted ingestion rates based on measured metal concentrations in lake suspended solids were 0.71, 6.2, 0.81, and 13 mg/kg-d for Cr, Cu, Pb, and Zn, respectively.

Nelson, Y.M.; DiSante, C.J.; Lion, L.W. [Cornell Univ., Ithaca, NY (United States). School of Civil and Environmental Engineering; Thampy, R.J.; Raini, J.A. [Worldwide Fund for Nature, Nakuru (Kenya). Lake Nakuru Conservation and Development Project; Motelin, G.K. [Egerton Univ., Njoro (Kenya). Dept. of Animal Health

1998-11-01T23:59:59.000Z

362

Evaluation of alternative chemical additives for high-level waste vitrification feed preparation processing  

SciTech Connect

During the development of the feed processing flowsheet for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS), research had shown that use of formic acid (HCOOH) could accomplish several processing objectives with one chemical addition. These objectives included the decomposition of tetraphenylborate, chemical reduction of mercury, production of acceptable rheological properties in the feed slurry, and controlling the oxidation state of the glass melt pool. However, the DEPF research had not shown that some vitrification slurry feeds had a tendency to evolve hydrogen (H{sub 2}) and ammonia (NH{sub 3}) as the result of catalytic decomposition of CHOOH with noble metals (rhodium, ruthenium, palladium) in the feed. Testing conducted at Pacific Northwest Laboratory and later at the Savannah River Technical Center showed that the H{sub 2} and NH{sub 3} could evolve at appreciable rates and quantities. The explosive nature of H{sub 2} and NH{sub 3} (as ammonium nitrate) warranted significant mitigation control and redesign of both facilities. At the time the explosive gas evolution was discovered, the DWPF was already under construction and an immediate hardware fix in tandem with flowsheet changes was necessary. However, the Hanford Waste Vitrification Plant (HWVP) was in the design phase and could afford to take time to investigate flowsheet manipulations that could solve the problem, rather than a hardware fix. Thus, the HWVP began to investigate alternatives to using HCOOH in the vitrification process. This document describes the selection, evaluation criteria, and strategy used to evaluate the performance of the alternative chemical additives to CHOOH. The status of the evaluation is also discussed.

Seymour, R.G.

1995-06-07T23:59:59.000Z

363

GLASS FABRICATION AND ANALYSIS LITERATURE REVIEW AND METHOD SELECTION FOR WTP WASTE FEED QUALIFICATION  

SciTech Connect

Scope of the Report The objective of this literature review is to identify and review documents to address scaling, design, operations, and experimental setup, including configuration, data collection, and remote handling that would be used during waste feed qualification in support of the glass fabrication unit operation. Items addressed include: ? LAW and HLW glass formulation algorithms; ? Mixing and sampling; ? Rheological measurements; ? Heat of hydration; ? Glass fabrication techniques; ? Glass inspection; ? Composition analysis; ? Use of cooling curves; ? Hydrogen generation rate measurement.

Peeler, D.

2013-06-27T23:59:59.000Z

364

Conceptual Design of an Ultra-Dense Phase Injector and Feed System  

DOE Green Energy (OSTI)

Pratt & Whitney Rocketdyne (PWR) has developed an innovative gasifier concept that uses rocket engine technology to significantly improve gasifier performance, life, and cost compared to current state-of-the-art systems. One key feature of the PWR concept is the use of an ultra-dense phase feed system to provide dry coal to the multi-element injector. This report describes the design of an ultra-dense phase multi-element injector and feed system for use on PWR gasifiers operating at pressures to 1,000 psia. For the design of this injector and feed system, the pulverized coal's Bingham fluid yield stress is approximately 11 Pascals (Pa) with a coefficient of rigidity of 10 centipoise (cp). These values are typical of earlier experimental testing conducted with dried pulverized coal below 18 wt% moisture -- see, e.g., Sprouse and Schuman (1983, 1986). Each individual injector element is designed for a coal flow rate between 3 and 4 tons/hr (0.76 to 1.0 kg/sec) at full flow conditions. Hence, a small 400 to 500 tons/day (4.2 to 5.25 kg/sec) gasifier will require a 6-element injector, a 1,500 tons/day (15.7 kg/sec) gasifier will require an 18-element injector and a 3,000 tons/day (31.5 kg/sec) gasifier will require a 36-element injector. These injectors and feed systems are capable of 'turn-down' below 50% of full-flow operation.

Ken Sprouse; Fred Widman; Alan Darby

2006-03-30T23:59:59.000Z

365

Experts Feed  

NLE Websites -- All DOE Office Websites (Extended Search)

Il Chang joined Argonne National Laboratory in 1974 and led the laboratory's advanced reactor design and fuel cycle technology development activities

July 1, 2013 Experts...

366

Evaluating Feed Delivery Performance in Scaled Double-Shell Tanks - 14070  

Science Conference Proceedings (OSTI)

The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capability using simulated Hanford High-Level Waste (HLW) formulations. This work represents one of the remaining technical issues with the high-level waste treatment mission at Hanford. The TOCs? ability to adequately mix and sample high-level waste feed to meet the WTP WAC Data Quality Objectives must be demonstrated. The tank mixing and feed delivery must support both TOC and WTP operations. The tank mixing method must be able to remove settled solids from the tank and provide consistent feed to the WTP to facilitate waste treatment operations. Two geometrically scaled tanks were used with a broad spectrum of tank waste simulants to demonstrate that mixing using two rotating mixer jet pumps yields consistent slurry compositions as the tank is emptied in a series of sequential batch transfers. Testing showed that the concentration of slow settling solids in each transfer batch was consistent over a wide range of tank operating conditions. Although testing demonstrated that the concentration of fast settling solids decreased by up to 25% as the tank was emptied, batch-to-batch consistency improved as mixer jet nozzle velocity in the scaled tanks increased.

Lee, Kearn P.; Thien, Michael G.

2013-11-07T23:59:59.000Z

367

Impact of finite-rate kinetics on carbon conversion in a single-stage entrained flow gasifier with coal-CO2 slurry feed  

E-Print Network (OSTI)

with coal-CO2 slurry feed Cristina Botero , Randall P. Field, Howard J. Herzog, Ahmed F. Ghoniem Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 Abstract Coal-CO2 slurry feed has been suggested as an attractive alternative to coal-water slurry feed for single

368

Coupling GIS and LCA for biodiversity assessments of land use: Part 1: Inventory modeling  

E-Print Network (OSTI)

extraction and siting of biorefineries. There is nothing inidentify locations for biorefineries within a harvest shed

Geyer, Roland; Stoms, David M.; Lindner, Jan P.; Davis, Frank W.; Wittstock, Bastian

2010-01-01T23:59:59.000Z

369

EA-1789: Finding of No Significant Impact  

Energy.gov (U.S. Department of Energy (DOE))

Construction and Operation of a Proposed Cellulosic Biorefinery, Alpena Prototype Biorefinery, Alpena, Michigan

370

Tank Farm Contractor Phase 1 Feed Delivery and Storage and Disposal Mission Summary for 2006 Hot Start Extended Order  

SciTech Connect

This is the level one logic diagram for the River Protection Project (RPP), Tank Farm Contractor, Phase 1, Feed Delivery Storage and Disposal Mission Summary for 2006 Hot Start.

DAVIS, T.J.

2000-04-24T23:59:59.000Z

371

Soybeans: Chemistry, Production, Processing, and UtilizationChapter 18 Nutritional Properties and Feeding Values of Soybeans and Their Coproducts  

Science Conference Proceedings (OSTI)

Soybeans: Chemistry, Production, Processing, and Utilization Chapter 18 Nutritional Properties and Feeding Values of Soybeans and Their Coproducts Food Science Health Nutrition Biochemistry Processing Soybeans eChapters Food Science

372

Microsoft PowerPoint - S08-03_Peeler_Feed Qualification for New Streams.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed Qualification for New Streams Feed Qualification for New Streams to DWPF Connie C. Herman (Presented by David Peeler) Manager, Process Technology Programs Savannah River National Laboratory November 17, 2010 Print Close 2 Feed Qualification for New Streams to DWPF Presentation Outline Overview of High Level Waste System Considerations for Qualification Qualification Process Flowsheet Testing Glass Formulation and Processing Impacts Radioactive Sample Characterization & Verification Print Close 3 Feed Qualification for New Streams to DWPF Waste Removal Grout Vault H Area Tanks F Area Tanks 2F 2H 3H Evaporators Extended Sludge Processing Canisters of Vitrified Glass Saltstone S a l t Salt Processing Tank Closure Tank Farm Storage & Evaporation Waste Removal & Pretreatment Final Processing Washed Sludge Low Level

373

Renewable Energy Prices in State-Level Feed-in Tariffs: Federal Law Constraints and Possible Solutions  

Science Conference Proceedings (OSTI)

State legislatures and state utility commissions trying to attract renewable energy projects are considering feed-in tariffs, which obligate retail utilities to purchase electricity from renewable producers under standard arrangements specifying prices, terms, and conditions. The use of feed-in tariffs simplifies the purchase process, provides revenue certainty to generators, and reduces the cost of financing generating projects. However, some argue that federal law--including the Public Utility Regulatory Policies Act of 1978 (PURPA) and the Federal Power Act of 1935 (FPA)--constrain state-level feed-in tariffs. This report seeks to reduce the legal uncertainties for states contemplating feed-in tariffs by explaining the constraints imposed by federal statutes. It describes the federal constraints, identifies transaction categories that are free of those constraints, and offers ways for state and federal policymakers to interpret or modify existing law to remove or reduce these constraints. This report proposes ways to revise these federal statutes. It creates a broad working definition of a state-level feed-in tariff. Given this definition, this report concludes there are paths to non-preempted, state-level feed-in tariffs under current federal law.

Hempling, S.; Elefant, C.; Cory, K.; Porter, K.

2010-01-01T23:59:59.000Z

374

FEED SYSTEM INNOVATION FOR GASIFICATION OF LOCALLY ECONOMICAL ALTERNATIVE FUELS (FIGLEAF)  

DOE Green Energy (OSTI)

The Feed System Innovation for Gasification of Locally Economical Alternative Fuels (FIGLEAF) project is being conducted by the Energy and Environmental Research Center and Gasification Engineering Corporation of Houston, Texas (a subsidiary of Global Energy Inc., Cincinnati, Ohio), with 80% cofunding from the U.S. Department of Energy. The goal of the project is to identify and evaluate low-value fuels that could serve as alternative feedstocks and to develop a feed system to facilitate their use in integrated gasification combined cycle and gasification coproduction facilities. The long-term goal, to be accomplished in a subsequent project, is to install a feed system for the selected fuels at Global Energy's commercial-scale 262-MW Wabash River Coal Gasification Facility in West Terre Haute, Indiana. The feasibility study undertaken for the project consists of identifying and evaluating the economic feasibility of potential fuel sources, developing a feed system design capable of providing a fuel at 400 psig to the second stage of the E-Gas (Destec) gasifier to be cogasified with coal at up to 30% on a Btu basis, performing bench- and pilot-scale testing to verify concepts and clarify decision-based options, reviewing prior art with respect to high-pressure feed system designs, and determining the economics of cofeeding alternative feedstocks with the conceptual feed system design. Activities and results thus far include the following. Several potential alternative fuels have been obtained for evaluation and testing as potential feedstocks, including sewage sludge, used railroad ties, urban wood waste, municipal solid waste, and used waste tires/tire-derived fuel. Only fuels with potential tipping fees were considered; potential energy crop fuels were not considered since they would have a net positive cost to the plant. Based on the feedstock assessment, sewage sludge has been selected as one of the primary feedstocks for consideration at the Wabash plant. Because of the limited waste heat available for drying and the ability of the gasifier to operate with alternative feedstocks at up to 80% moisture, a decision was made to investigate a pumping system for delivering the as-received fuel across the pressure boundary. High-temperature drop-tube furnace tests were conducted to determine if explosive fragmentation of high-moisture sludge droplets could be expected, but showed that these droplets underwent a shrinking and densification process that implies that the sludge will have to be well dispersed when injected into the gasifier. Fuel dispersion nozzles have been obtained for measuring how well the sludge can be dispersed in the second stage of the gasifier. Future work will include leasing a Schwing America pump to test pumping sewage sludge against 400 psig. In addition, sludge dispersion testing will be completed using two different dispersion nozzles to determine their ability to generate sludge particles small enough to be entrained out of the E-Gas entrained-flow gasifier.

Michael L. Swanson; Mark A. Musich; Darren D. Schmidt

2001-11-01T23:59:59.000Z

375

Comparison of Waste Feed Delivery Small Scale Mixing Demonstration Simulant to Hanford Waste  

SciTech Connect

The Hanford double-shell tank (DST) system provides the staging location for waste that will be transferred to the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Specific WTP acceptance criteria for waste feed delivery describe the physical and chemical characteristics of the waste that must be met before the waste is transferred from the DSTs to the WTP. One of the more challenging requirements relates to the sampling and characterization of the undissolved solids (UDS) in a waste feed DST because the waste contains solid particles that settle and their concentration and relative proportion can change during the transfer of the waste in individual batches. A key uncertainty in the waste feed delivery system is the potential variation in UDS transferred in individual batches in comparison to an initial sample used for evaluating the acceptance criteria. To address this uncertainty, a number of small-scale mixing tests have been conducted as part of Washington River Protection Solutions' Small Scale Mixing Demonstration (SSMD) project to determine the performance of the DST mixing and sampling systems. A series of these tests have used a five-part simulant composed of particles of different size and density and designed to be equal or more challenging than AY-102 waste. This five-part simulant, however, has not been compared with the broad range of Hanford waste, and thus there is an additional uncertainty that this simulant may not be as challenging as the most difficult Hanford waste. The purpose of this study is to quantify how the current five-part simulant compares to all of the Hanford sludge waste, and to suggest alternate simulants that could be tested to reduce the uncertainty in applying the current testing results to potentially more challenging wastes.

Wells, Beric E.; Gauglitz, Phillip A.; Rector, David R.

2012-07-10T23:59:59.000Z

376

Comparison of Waste Feed Delivery Small Scale Mixing Demonstration Simulant to Hanford Waste  

SciTech Connect

The Hanford double-shell tank (DST) system provides the staging location for waste that will be transferred to the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Specific WTP acceptance criteria for waste feed delivery describe the physical and chemical characteristics of the waste that must be met before the waste is transferred from the DSTs to the WTP. One of the more challenging requirements relates to the sampling and characterization of the undissolved solids (UDS) in a waste feed DST because the waste contains solid particles that settle and their concentration and relative proportion can change during the transfer of the waste in individual batches. A key uncertainty in the waste feed delivery system is the potential variation in UDS transferred in individual batches in comparison to an initial sample used for evaluating the acceptance criteria. To address this uncertainty, a number of small-scale mixing tests have been conducted as part of Washington River Protection Solutions' Small Scale Mixing Demonstration (SSMD) project to determine the performance of the DST mixing and sampling systems. A series of these tests have used a five-part simulant composed of particles of different size and density and designed to be equal or more challenging than AY-102 waste. This five-part simulant, however, has not been compared with the broad range of Hanford waste, and thus there is an additional uncertainty that this simulant may not be as challenging as the most difficult Hanford waste. The purpose of this study is to quantify how the current five-part simulant compares to all of the Hanford sludge waste, and to suggest alternate simulants that could be tested to reduce the uncertainty in applying the current testing results to potentially more challenging wastes.

Wells, Beric E.; Gauglitz, Phillip A.; Rector, David R.

2011-09-01T23:59:59.000Z

377

Comparison of Waste Feed Delivery Small Scale Mixing Demonstration Simulant to Hanford Waste  

Science Conference Proceedings (OSTI)

'The Hanford double-shell tank (DST) system provides the staging location for waste feed delivery to the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Hall (2008) includes WTP acceptance criteria that describe physical and chemical characteristics of the waste that must be certified as acceptable before the waste is transferred from the DSTs to the WTP. One of the more challenging requirements relates to the sampling and characterization of the undissolved solids (UDS) in a waste feed DST. The objectives of Washington River Protection Solutions' (WRPS) Small Scale Mixing Demonstration (SSMD) project are to understand and demonstrate the DST sampling and batch transfer performance at multiple scales using slurry simulants comprised of UDS particles and liquid (Townson 2009). The SSMD project utilizes geometrically scaled DST feed tanks to generate mixing, sampling, and transfer test data. In Phase 2 of the testing, RPP-49740, the 5-part simulant defined in RPP-48358 was used as the waste slurry simulant. The Phase 2 test data are being used to estimate the expected performance of the prototypic systems in the full-scale DSTs. As such, understanding of the how the small-scale systems as well as the simulant relate to the full-scale DSTs and actual waste is required. The focus of this report is comparison of the size and density of the 5-part SSMD simulant to that of the Hanford waste. This is accomplished by computing metrics for particle mobilization, suspension, settling, transfer line intake, and pipeline transfer from the characterization of the 5-part SSMD simulant and characterizations of the Hanford waste. In addition, the effects of the suspending fluid characteristics on the test results are considered, and a computational fluid dynamics tool useful to quantify uncertainties from simulant selections is discussed.'

Wells, Beric E.; Gauglitz, Phillip A.; Rector, David R.

2011-08-15T23:59:59.000Z

378

TANK 21 AND TANK 24 BLEND AND FEED STUDY: BLENDING TIMES, SETTLING TIMES, AND TRANSFERS  

Science Conference Proceedings (OSTI)

The Salt Disposition Integration (SDI) portfolio of projects provides the infrastructure within existing Liquid Waste facilities to support the startup and long term operation of the Salt Waste Processing Facility (SWPF). Within SDI, the Blend and Feed Project will equip existing waste tanks in the Tank Farms to serve as Blend Tanks where salt solutions of up to 1.2 million gallons will be blended in 1.3 million gallon tanks and qualified for use as feedstock for SWPF. In particular, Tanks 21 and 24 are planned to be used for blending and transferring to the SDI feed tank. These tanks were evaluated here to determine blending times, to determine a range of settling times for disturbed sludge, and to determine that the SWPF Waste Acceptance Criteria that less than 1200 mg/liter of solids will be entrained in salt solutions during transfers from the Tank 21 and Tank 24 will be met. Overall conclusions for Tank 21 and Tank 24 operations include: (1) Experimental correction factors were applied to CFD (computational fluid dynamics) models to establish blending times between approximately two and five hours. As shown in Phase 2 research, blending times may be as much as ten times greater, or more, if lighter fluids are added to heavier fluids (i.e., water added to salt solution). As the densities of two salt solutions converge this effect may be minimized, but additional confirmatory research was not performed. (2) At the current sludge levels and the presently planned operating heights of the transfer pumps, solids entrainment will be less than 1200 mg/liter, assuming a conservative, slow settling sludge simulant. (3) Based on theoretical calculations, particles in the density range of 2.5 to 5.0 g/mL must be greater than 2-4 {micro}m in diameter to ensure they settle adequately in 30-60 days to meet the SWPF feed criterion ( 60 days) settling times in Tank 21.

Lee, S.; Leishear, R.; Poirier, M.

2012-05-31T23:59:59.000Z

379

Evaluation of 241-AZ tank farm supporting phase 1 privatization waste feed delivery  

Science Conference Proceedings (OSTI)

This evaluation is one in a series of evaluations determining the process needs and assessing the adequacy of existing and planned equipment in meeting those needs at various double-shell tank farms in support of Phase 1 privatization. A number of tank-to-tank transfers and waste preparation activities are needed to process and feed waste to the private contractor in support of Phase 1 privatization. The scope of this evaluation is limited to process needs associated with 241-AZ tank farm during the Phase 1 privatization.

CARLSON, A.B.

1998-11-19T23:59:59.000Z

380

Effect of methanol crossover in a liquid-feed polymer-electrolyte direct methanol fuel cell  

Science Conference Proceedings (OSTI)

The performance of a liquid-feed direct methanol fuel cell employing a proton-exchange membrane electrolyte with Pt-Ru/C as anode and Pt/C as cathode is reported. The fuel cell can deliver a power density of ca. 0.2 W/cm{sup 2} at 95 C, sufficient to suggest that the stack construction is well worthwhile. Methanol crossover across the polymer electrolyte at concentrations beyond 2 M methanol affects the performance of the cell which appreciates with increasing operating temperature.

Ravikumar, M.K.; Shukla, A.K. [Indiana Inst. of Science, Bangalore (India). Solid State and Structural Chemistry Unit

1996-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Program on Technology Innovation: Liquid CO2 Coal Slurry for Feeding Coal to Gasifiers  

Science Conference Proceedings (OSTI)

Liquid CO2 (CO2(l)) has several property differences from water that make it attractive for the coal slurries used in coal-gasification-based power plants. Liquid CO2 has a heat of vaporization that is less than one-quarter of that of water, and it has lower viscosity. Since future coal-based power plants may have to control CO2 emissions by use of a CO2 capture and storage system, it may make economic sense to recycle some of the captured CO2 back to the coal feeding system where it could be used as the...

2010-06-30T23:59:59.000Z

382

Integrating UF6 Cylinder RF Tracking With Continuous Load Cell Monitoring for Verifying Declared UF6 Feed and Withdrawal Operations Verifying Declared UF6 Feed and Withdrawal Operations  

SciTech Connect

Oak Ridge National Laboratory is demonstrating the integration of UF6 cylinder tracking, using RF technology, with continuous load cell monitoring (CLCM) at mock UF6 feed and withdrawal (F&W) stations. CLCM and cylinder tracking are two of several continuous-monitoring technologies that show promise in providing integrated safeguards of F&W operations at enrichment plants. Integrating different monitoring technologies allows advanced, automated event processing to screen innocuous events thereby minimizing false alerts to independent inspectors. Traditionally, international inspectors rely on batch verification of material inputs and outputs derived from operator declarations and periodic on-site inspections at uranium enrichment plants or other nuclear processing facilities. Continuously monitoring F&W activities between inspections while providing filtered alerts of significant operational events will substantially increase the amount of valuable information available to inspectors thereby promising to enhance the effectiveness of safeguards and to improve efficiency in conducting on-site inspections especially at large plants for ensuring that all operations are declared.

Krichinsky, Alan M [ORNL; Miller, Paul [ORNL; Pickett, Chris A [ORNL; Richardson, Dave [ORNL; Rowe, Nathan C [ORNL; Whitaker, J Michael [ORNL; Younkin, James R [ORNL

2009-01-01T23:59:59.000Z

383

Impacts of Feed Composition and Recycle on Hanford Low-Activity Waste Glass Mass  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feed Composition Feed Composition and Recycle on Hanford Low- Activity Waste Glass Mass J.D. Vienna & D.S. Kim - Pacific Northwest National Laboratory I.L. Pegg - Catholic University of America 1 LAW Glass Loading Limits WTP baseline (LAW Glass Formulation Algorithm) low uncertainty  thoroughly tested accounts for Na, S, Cl, F, Cr, K, and P impacts conservative loading Advanced silicate formulation higher uncertainty than baseline currently accounts for Na and S impacts impacts of other components not specifically tested, but, one can evaluate maxima from testing as a lower bound 2 0 5 10 15 20 25 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 SO 3 (target) wt% in Glass Na 2 O (target) wt% in Glass SO 3 ≤ 0.77 wt% Na 2 O ≤ 35.875 - 42.5*SO 3 (in wt%) Na 2 O ≤ 21 wt% Na 2 O + 0.66*K

384

Analysis of the Tank 5F Feed and Bleed Residual Solids  

SciTech Connect

Savannah River Remediation (SRR) is preparing Tank 5F for closure. As part of Tank 5F Closure Mechanical Cleaning, SRR conducted a 'Feed and Bleed' process in Tank 5F. Following this 'Feed and Bleed' Mechanical Cleaning in Tank 5F, SRR collected two tank heel samples (referred to as sample 1 and sample 2) under Riser 5 to determine the composition of the material remaining in the tanks. This document describes sample analysis results. The conclusions from this analysis follow. (1) The anions measured all had a concentration less than 250 mg/kg, except for oxalate, which had a concentration of 2100-2400 mg/kg. (2) The measured cations with the highest concentration were iron (432,000-519,000 mg/kg), nickel (54,600-69,300 mg/kg), and manganese (35,200-42,100 mg/kg). All other cations measured less than 13,000 mg/kg. (3) The radionuclides present in the highest concentration are {sup 90}Sr (3.0 x 10{sup 10} dpm/g), {sup 137}Cs (6.8 x 10{sup 8} dpm/g), and {sup 241}Am (1.4 x 10{sup 8} - 1.8 x 10{sup 8} dpm/g). (4) The particle size analysis shows a large fraction of particles greater than 100 {micro}.

Poirier, M.; Diprete, D.: Coleman, C.; Washington, A.

2011-07-07T23:59:59.000Z

385

Visual language recognition with a feed-forward network of spiking neurons  

Science Conference Proceedings (OSTI)

An analogy is made and exploited between the recognition of visual objects and language parsing. A subset of regular languages is used to define a one-dimensional 'visual' language, in which the words are translational and scale invariant. This allows an exploration of the viewpoint invariant languages that can be solved by a network of concurrent, hierarchically connected processors. A language family is defined that is hierarchically tiling system recognizable (HREC). As inspired by nature, an algorithm is presented that constructs a cellular automaton that recognizes strings from a language in the HREC family. It is demonstrated how a language recognizer can be implemented from the cellular automaton using a feed-forward network of spiking neurons. This parser recognizes fixed-length strings from the language in parallel and as the computation is pipelined, a new string can be parsed in each new interval of time. The analogy with formal language theory allows inferences to be drawn regarding what class of objects can be recognized by visual cortex operating in purely feed-forward fashion and what class of objects requires a more complicated network architecture.

Rasmussen, Craig E [Los Alamos National Laboratory; Garrett, Kenyan [Los Alamos National Laboratory; Sottile, Matthew [GALOIS; Shreyas, Ns [INDIANA UNIV.

2010-01-01T23:59:59.000Z

386

A Compact Parallel-plane Perpendicular-current Feed for a Modified Equiangular Spiral Antenna and Related Circuits  

E-Print Network (OSTI)

This work describes the design and measurement of a compact bidirectional ultrawideband (UWB) modified equiangular spiral antenna with an integrated feed internally matched to a 50-Ohm microstrip transmission line. A UWB transition from microstrip to double-sided parallel-strip line (DSPSL) soldered to a short (1.14 mm) twin-line transmission line feeds the spiral. The currents on the feed travel in a direction approximately perpendicular to the direction of the currents on the spiral at the points where the feed passes the spiral in close proximity (0.57 mm). Holes were etched from the metal arms of the spiral to reduce the impedance mismatch caused by coupling between the transmission line feed and the spiral. This work also describes a low-loss back-to-back transition from coaxial line to DSPSL, an in-phase connectorized 3 dB DSPSL power divider made using three of those transitions, a 2:1 in-phase DSPSL power divider, a 3:1 in-phase DSPSL power divider, a radial dipole fed by DSPSL, an array of those dipoles utilizing the various power dividers, and a UWB circular monopole antenna fed by DSPSL. Measured and simulated results show good agreement for the designed antennas and circuits.

Eubanks, Travis Wayne

2010-05-01T23:59:59.000Z

387

The diversity, distribution and feeding behavior of solifuges (arachnida; solifugae) in Kenya.  

E-Print Network (OSTI)

Little is known of the diversity of solifuges in East Africa or their habitat preferences and feeding biologies. A survey was undertaken to improve our understanding of the diversity and distribution of solifuges in Kenya and these data were supplemented by the solifuge holdings of the National Museums of Kenya (NMK), which were identified as part of this study. Historical records of each species found during this survey were verified through assessment of the primary literature and distributions were mapped for all Kenyan spp. A feeding study was conducted to determine preference between hard and toxic prey, and owl pellets from Tucson, Arizona were dissected to determine the importance of solifuges as prey. Finally, various outreach activities that were led and organized during this study were discussed, detailing the importance of science outreach as the bridge between research and the general public. All solifuges used in the feeding study ate the termites that were used as a behavioral control, but only three individuals of one species of solifuge, Z. fordi, were able to eat both hard and toxic prey items repeatedly. Solifuges were more willing or able to eat toxic prey than hard. Burrowing owl pellets from Tucson, Arizona were examined for invertebrate parts and preference was assessed for the five most commonly eaten arthropods. Solifuges were the third most frequently encountered arthropod in the pellets, after caterpillars and beetles, and were also the third most abundant. Solifuges were sampled over a period of six months and collected from 28.V.2006-8.VI.2006 and 11.II.2007- 13.V.2007 from eight different localities in Kenya. During this survey two genera were newly recorded for Kenya, Tarabulida and Solpugyla. In addition, the Tarabulida specimen is the first male ever recorded for the genus. Three new species records for Kenya were added: Z. sericea, Z. lobatula and Z. meruensis, and six undescribed species were recorded from Kenya as a result of this survey, including five unidentified rhagodids and species of Tarabulida. The southernmost locality record for the Galeodidae and Galeodes arabs arabs was uncovered in the NMK holdings.

Reddick, Kristie Lynn

2008-05-01T23:59:59.000Z

388

TANK 21 AND TANK 24 BLEND AND FEED STUDY: BLENDING TIMES, SETTLING TIMES, AND TRANSFERS  

SciTech Connect

The Salt Disposition Integration (SDI) portfolio of projects provides the infrastructure within existing Liquid Waste facilities to support the startup and long term operation of the Salt Waste Processing Facility (SWPF). Within SDI, the Blend and Feed Project will equip existing waste tanks in the Tank Farms to serve as Blend Tanks where salt solutions of up to 1.2 million gallons will be blended in 1.3 million gallon tanks and qualified for use as feedstock for SWPF. In particular, Tanks 21 and 24 are planned to be used for blending and transferring to the SDI feed tank. These tanks were evaluated here to determine blending times, to determine a range of settling times for disturbed sludge, and to determine that the SWPF Waste Acceptance Criteria that less than 1200 mg/liter of solids will be entrained in salt solutions during transfers from the Tank 21 and Tank 24 will be met. Overall conclusions for Tank 21 and Tank 24 operations include: (1) Experimental correction factors were applied to CFD (computational fluid dynamics) models to establish blending times between approximately two and five hours. As shown in Phase 2 research, blending times may be as much as ten times greater, or more, if lighter fluids are added to heavier fluids (i.e., water added to salt solution). As the densities of two salt solutions converge this effect may be minimized, but additional confirmatory research was not performed. (2) At the current sludge levels and the presently planned operating heights of the transfer pumps, solids entrainment will be less than 1200 mg/liter, assuming a conservative, slow settling sludge simulant. (3) Based on theoretical calculations, particles in the density range of 2.5 to 5.0 g/mL must be greater than 2-4 {micro}m in diameter to ensure they settle adequately in 30-60 days to meet the SWPF feed criterion (<1200 mg/l). (4) Experimental tests with sludge batch 6 simulant and field turbidity data from a recent Tank 21 mixing evolution suggest the solid particles have higher density and/or larger size than indicated by previous analysis of SRS sludge and sludge simulants. (5) Tank 21 waste characterization, laboratory settling tests, and additional field turbidity measurements during mixing evolutions are recommended to better understand potential risk for extended (> 60 days) settling times in Tank 21.

Lee, S.; Leishear, R.; Poirier, M.

2012-05-31T23:59:59.000Z

389

Interim report VII, production test IP-549-A half-plant low alum feed water treatment at F Reactor  

SciTech Connect

A half-plant low alum water treatment test began at F Reactor on January 16, 1963. The test, which had been prompted by the analysis of ledge corrosion attack on fuel elements, will demonstrate whether or not high alum feed is responsible for increasing the frequency of ledge and groove corrosion attack on fuel element surfaces. The effect will be evaluated by comparing visual examination results obtained from the normal production fuel irradiated in process water treated with two different alum feed rates. Six 20-column fuel discharges, ten columns from each side of the reactor, have been taken during the test as follows: (1) One discharge prior to the start of the test. (2) One discharge such that the test side was exposed to coolant treated with both high and low alum feed. (3) Four discharges under test conditions. This report discusses the results obtained from the fifth discharge under test conditions.

Geier, R.G.

1964-03-18T23:59:59.000Z

390

EFFECTS OF QUARTZ PARTICLE SIZE AND SUCROSE ADDITION ON MELTING BEHAVIOR OF A MELTER FEED FOR HIGH-LEVEL GLASS  

SciTech Connect

The behavior of melter feed (a mixture of nuclear waste and glass-forming additives) during waste-glass processing has a significant impact on the rate of the vitrification process. We studied the effects of silica particle size and sucrose addition on the volumetric expansion (foaming) of a high-alumina feed and the rate of dissolution of silica particles in feed samples heated at 5 C/min up to 1200 C. The initial size of quartz particles in feed ranged from 5 to 195 {micro}m. The fraction of the sucrose added ranged from 0 to 0.20 g per g glass. Extensive foaming occurred only in feeds with 5-{micro}m quartz particles; particles {ge}150 {micro}m formed clusters. Particles of 5 {micro}m completely dissolved by 900 C whereas particles {ge}150 {micro}m did not fully dissolve even when the temperature reached 1200 C. Sucrose addition had virtually zero impact on both foaming and the dissolution of silica particles. Over 100 sites in the United States are currently tasked with the storage of nuclear waste. The largest is the Hanford Site located in southeastern Washington State with 177 subterranean tanks containing over fifty-million gallons of nuclear waste from plutonium production from 1944 through 1987. This waste will be vitrified at the Hanford Tank Waste Treatment and Immobilization Plant. In the vitrification process, feed is charged into a melter and converted into glass to be ultimately stored in a permanent repository. The duration of waste-site cleanups by the vitrification process depends on the rate of melting, i.e., on the rate of the feed-to-glass conversion. Foaming associated with the melting process and the rate of dissolution of quartz particles (silica being the major glass-forming additive) are assumed to be important factors that influence the rate of melting. Previous studies on foaming of high-alumina feed demonstrated that varying the makeup of a melter feed has a significant impact on foaming. The volume of feeds that contained 5-{micro}m quartz particles substantially increased because of foaming. The extent of foaming decreased as the particle size of quartz increased. Moreover, samples containing quartz particles 195 {micro}m formed agglomerates at temperatures above 900 C that only slowly dissolved in the melt. This study continues previous work on the feed-melting process, specifically on the effects of the size of silica particles on the formation of nuclear-waste glasses to determine a suitable range of silica particle sizes that causes neither excessive foaming nor undesirable agglomeration. Apart from varying the silica-particle size, carbon was added in the form of sucrose. Sucrose has been used to accelerate the rate of melting. In this study, we have observed its impact on feed foaming and quartz dissolution.

MARCIAL J; KRUGER AA; HRMA PR; SCHWEIGER MJ; SWEARINGEN KJ; TEGROTENHUIS WE; HENAGER SH

2010-07-28T23:59:59.000Z

391

RENEWABLE ENERGY AT WHAT COST? ASSESSING THE EFFECT OF FEED-IN TARIFF POLICIES ON CONSUMER ELECTRICITY PRICES IN THE EUROPEAN UNION.  

E-Print Network (OSTI)

??In the last two decades, feed-in tariffs (FIT) have emerged as the dominant policy instrument for supporting electricity from renewable sources in the European Union. (more)

Klein, Christopher A.

2012-01-01T23:59:59.000Z

392

,"U.S. Downstream Processing of Fresh Feed Input"  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly","9/2013","1/15/1987" Monthly","9/2013","1/15/1987" ,"Release Date:","11/27/2013" ,"Next Release Date:","Last Week of December 2013" ,"Excel File Name:","pet_pnp_dwns_dc_nus_mbblpd_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_pnp_dwns_dc_nus_mbblpd_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"11/25/2013 11:17:28 AM" "Back to Contents","Data 1: U.S. Downstream Processing of Fresh Feed Input" "Sourcekey","M_NA_YDR_NUS_MBBLD","MCRCCUS2","MCRCHUS2","MCRDFUS2"

393

SRAT CHEMISTRY AND ACID CONSUMPTION DURING SIMULATED DWPF MELTER FEED PREPARATION  

DOE Green Energy (OSTI)

Due to higher than expected hydrogen generation during the Tank 51-Sludge Batch 4 (SB4) qualification run, DWPF engineering requested the Savannah River National Laboratory (SRNL) to expand the ongoing catalytic hydrogen generation program. The work presented in this Technical Report was identified as part of SRNL/Liquid Waste Organization (LWO) meetings to define potential causes of catalytic hydrogen generation as well as from an external technical review panel commissioned to evaluate SRNL hydrogen related data and programs. New scope included improving the understanding of SRAT/SME process chemistry, particularly as it related to acid consumption and hydrogen generation. The expanded hydrogen program scope was covered under the technical task request (TTR): HLW-DWPF-TTR-2007-0016. A task technical and quality assurance plan (TT&QAP) was issued to cover focus areas raised in meetings with LWO plus a portion of the recommendations made by the review panel. A supporting analytical study plan was issued. It was also noted in the review of catalytic hydrogen generation that control of the DWPF acid stoichiometry was an important element in controlling hydrogen generation. A separate TTR was issued to investigate ways of improving the determination of the acid requirement during processing: HLWDWPF-TTR-0015. A separate TT&QAP was prepared for this task request. This report discusses some progress on this task related to developing alternative acid equations and to performing experimental work to supplement the existing database. Simulant preparation and preliminary flowsheet studies were already documented. The prior work produced a sufficient quantity of simulant for the hydrogen program and melter feed rheology testing. It also defined a suitable acid addition stoichiometry. The results presented in this report come from samples and process data obtained during sixteen 22-L SRAT/SME simulations that were performed in the second half of 2007 to produce eight SME products with frit 418 and a matching set of eight SME products with spherically beaded frit 418. The requirement to produce two 25 gallon batches of melter feed for the melter feed rheology modifier program fell under a separate task plan. One supporting 4-L SRAT simulation was performed with mercury, since the 22-L melter feed preparation runs had no mercury due to melter off-gas constraints. As a result of this work, a timeline of reactions has been developed showing the sequence of major reactions occurring during and shortly after acid addition. The traditional-style simulant used in this testing had fairly well defined speciation which enabled the reactions being observed to be related to acid consumption. The new coprecipitated simulants have somewhat different speciation, and it will be necessary to validate some of the conclusions from this testing using sample data from SRAT simulations with coprecipitated simulant. Noble metal dissolution data on timing and concentration were presented in a separate report discussing hydrogen generation. A few of those results will be brought into this report as part of the description of the SRAT chemistry timeline. The noble metal and mercury concentrations used in the preliminary flowsheet studies are summarized in Table 1 along with the ranges covered in this study.

Koopman, D; David Best, D; Bradley Pickenheim, B

2008-12-03T23:59:59.000Z

394

Relevance of Generation Interconnection Procedures to Feed-in Tariffs in the United States  

Science Conference Proceedings (OSTI)

Feed-in tariffs (FITs) have been used to promote renewable electricity development in over 40 countries throughout the past two decades. These policies generally provide guaranteed prices for the full system output from eligible generators for a fixed time period (typically 15-20 years). Due in part to the success of FIT policies in Europe, some jurisdictions in the United States are considering implementing similar policies, and a few have already put such policies in place. This report is intended to offer some guidance to policymakers and regulators on how generator interconnection procedures may affect the implementation of FITs and how state generator interconnection procedures can be formulated to support state renewable energy objectives. This report is based on a literature review of model interconnection procedures formulated by several organizations, as well as other documents that have reviewed, commented on, and in some cases, ranked state interconnection procedures.

Fink, S.; Porter, K.; Rogers, J.

2010-10-01T23:59:59.000Z

395

LONG-TERM CALIBRATION STABILITY OF A RADIO ASTRONOMICAL PHASED ARRAY FEED  

SciTech Connect

There are many challenges associated with the implementation of a phased array feed for radio astronomy applications. Among these is the need to have an adequate set of calibration measurements so that reliable beamformers can be computed. Changes in the operating environment and temporal gain drift in the electronics contribute to calibration drift, which affects the beamformer performance. We will show that calibration measurements are relatively stable over a 5 day period and may remain so for up to 70 days or longer. We have incorporated the use of a calibration update system that has the potential to refresh a set of old calibrators, specifically correcting for electronic gain drift. However, the long-term variations that are present with fresh, current calibrators are greater than the degradation due to using an old calibration set, suggesting that, at this time, there is not a need for sophisticated calibration update systems or algorithms.

Elmer, Michael; Jeffs, Brian D.; Warnick, Karl F. [Department of Electrical and Computer Engineering, Brigham Young University, Provo, UT 84602 (United States)

2013-01-01T23:59:59.000Z

396

Evaluation of feeds for melt and dilute process using an analytical hierarchy process  

Science Conference Proceedings (OSTI)

Westinghouse Savannah River Company was requested to evaluate whether nuclear materials other than aluminum-clad spent nuclear fuel should be considered for treatment to prepare them for disposal in the melt and dilute facility as part of the Treatment and Storage Facility currently projected for construction in the L-Reactor process area. The decision analysis process used to develop this analysis considered many variables and uncertainties, including repository requirements that are not yet finalized. The Analytical Hierarchy Process using a ratings methodology was used to rank potential feed candidates for disposition through the Melt and Dilute facility proposed for disposition of Savannah River Site aluminum-clad spent nuclear fuel. Because of the scoping nature of this analysis, the expert team convened for this purpose concentrated on technical feasibility and potential cost impacts associated with using melt and dilute versus the current disposition option. This report documents results of the decision analysis.

Krupa, J.F.

2000-03-22T23:59:59.000Z

397

Process for hydrocracking carbonaceous material to provide fuels or chemical feed stock  

DOE Patents (OSTI)

A process is disclosed for hydrocracking coal or other carbonaceous material to produce various aromatic hydrocarbons including benzene, toluene, xylene, ethylbenzene, phenol and cresols in variable relative concentrations while maintaining a near constant maximum temperature. Variations in relative aromatic concentrations are achieved by changing the kinetic severity of the hydrocracking reaction by altering the temperature profile up to and quenching from the final hydrocracking temperature. The relative concentration of benzene to the alkyl and hydroxyl aromatics is increased by imposing increased kinetic severity above that corresponding to constant heating rate followed by immediate quenching at about the same rate to below the temperature at which dehydroxylation and dealkylation reactions appreciably occur. Similarly phenols, cresols and xylenes are produced in enhanced concentrations by adjusting the temperature profile to provide a reduced kinetic severity relative to that employed when high benzene concentrations are desired. These variations in concentrations can be used to produce desired materials for chemical feed stocks or for fuels.

Duncan, Dennis A. (Downers Grove, IL)

1980-01-01T23:59:59.000Z

398

Impact of Feed Injection Strategies on Fluidization Dynamics for Biomass Thermochemical Conversion  

SciTech Connect

To better understand some of the key parameters that control biomass conversion processes in dense granular beds, an efficient computational framework for large-scale simulations of dense, reactive particulate flows using a Lagrange-Euler approach has been developed. This framework is applied here to the investigation of feed injection in a hot fluidized bed reactor, and how it may impact the biomass conversion dynamics. A simple, pseudo-two dimensional configuration is adopted to facilitate the parametric study. Chemical processes are modeled using global kinetics that accurately reproduce particle mass loss and gas release. A posteriori analysis of particle heating rate, mixing and segregation, along with products distribution and residence time inside the reactor is performed for different injection strategies, and compared to non-reactive cases. Results highlight some non-trivial coupling between chemistry and flow dynamics.

Malhotra, K. N.; Pepiot, P.; Capecelatro, J. S.; Desjardins, O.; Grout, R.; Nimlos, M. R.

2012-01-01T23:59:59.000Z

399

Capacity dynamics of feed-forward, flow-matching networks exposed to random disruptions  

E-Print Network (OSTI)

While lean manufacturing has greatly improved the efficiency of production operations, it has left US enterprises in an increasingly risky environment. Causes of manufacturing disruptions continue to multiply, and today, seemingly minor disruptions can cause cascading sequences of capacity losses. Historically, enterprises have lacked viable tools for addressing operational volatility. As a result, each year US companies forfeit billions of dollars to unpredictable capacity disruptions and insurance premiums. In this dissertation we develop a number of stochastic models that capture the dynamics of capacity disruptions in complex multi-tier flow-matching feed-forward networks (FFN). In particular, we relax basic structural assumptions of FFN, introduce random propagation times, study the impact of inventory buffers on propagation times, and make initial efforts to model random network topology. These stochastic models are central to future methodologies supporting strategic risk management and enterprise network design.

Savachkin, Aliaksei

2005-08-01T23:59:59.000Z

400

Optimization of a rapid microbiological method for the assessment of lysine bioavailability of animal feed proteins  

E-Print Network (OSTI)

Achieving nutritional requirements can be a difficult hics. task with the wide variety of protein sources utilized in the feed industry. Assessing the biological availability of amino acids in protein sources rapidly is essential to satisfy dietary requirements and for least cost feed formulation. Of the amino acids, lysine is of key importance due to it being first or second limiting in poultry diets. Therefore, a deficiency or absence of lysine can halt protein synthesis in the animal hindering proper growth and maintenance. The standard method to quantitate the biological availability of lysine is to perform animal growth or digestibility assays, but such assays do not provide a cost effective, timely and reliable determination of lysine availability. Microbiological assays are a rapid and cost effective alternative to animal bioassays. Auxotrophic mutants of Escherichia coli have been shown to be an accurate indicator of amino acid availability in various protein sources when compared to animal and chemical data. The objective of this research is to develop a more rapid in vitro amino acid bioassay for lysine utilizing an E. coli lysine auxotroph that is comparable to conventional in vitro assays for lysine bioavailability. This involves (1) developing a standard medium for lysine assessment of protein sources that will eliminate background microform from protein sources (2) developing a standardized enzyme digest step that can be used on a wide variety of protein sources and (3) developing a luminescent lysine auxotroph strain of E. coli for more rapid lysine assessment. Completion of these objectives will allow the rapid determination of lysine availability and potentially replace animal bioassays resulting in improvements in nutritional quality and cost effectiveness of diets for animal consumption.

Erickson, Anne Marie

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Simulant Development for Hanford Double-Shell Tank Mixing and Waste Feed Delivery Testing  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy Office of River Projection manages the River Protection Project, which has the mission to retrieve and treat the Hanford tank waste for disposal and close the tank farms (Certa et al. 2011). Washington River Protection Solutions, LLC (WRPS) is responsible for a primary objective of this mission which is to retrieve and transfer tank waste to the Hanford Waste Treatment and Immobilization Plant (WTP). A mixing and sampling program with four separate demonstrations is currently being conducted to support this objective and also to support activities in a plan for addressing safety concerns identified by the Defense Nuclear Facilities Safety Board related to the ability of the WTP to mix, sample, and transfer fast settling particles. Previous studies have documented the objectives, criteria, and selection of non-radioactive simulants for these four demonstrations. The identified simulants include Newtonian suspending liquids with densities and viscosities that span the range expected in waste feed tanks. The identified simulants also include non-Newtonian slurries with Bingham yield stress values that span a range that is expected to bound the Bingham yield stress in the feed delivery tanks. The previous studies identified candidate materials for the Newtonian and non-Newtonian suspending fluids, but did not provide specific recipes for obtaining the target properties and information was not available to evaluate the compatibility of the fluids and particles or the potential for salt precipitation at lower temperatures. The purpose of this study is to prepare small batches of simulants in advance of the demonstrations to determine specific simulant recipes, to evaluate the compatibility of the liquids and particles, and to determine if the simulants are stable for the potential range of test temperatures. The objective of the testing, which is focused primarily on the Newtonian and non-Newtonian fluids, is to determine the composition of simulant materials that give the desired density and viscosity or rheological parameters.

Gauglitz, Phillip A.; Tran, Diana N.; Buchmiller, William C.

2012-09-24T23:59:59.000Z

402

Waste Feed Delivery System Phase 1 Preliminary Reliability and Availability and Maintainability Analysis [SEC 1 and 2  

SciTech Connect

The document presents updated results of the preliminary reliability, availability, maintainability analysis performed for delivery of waste feed from tanks 241-AZ-101 and 241-AN-105 to British Nuclear Fuels Limited, inc. under the Tank Waste Remediation System Privatization Contract. The operational schedule delay risk is estimated and contributing factors are discussed.

CARLSON, A.B.

1999-11-11T23:59:59.000Z

403

Advances in Conjugated Linoleic Acid Research, Vol 2Chapter 9 Animal Feeding Strategies for Conjugated Linoleic Acid Enrichment of Milk  

Science Conference Proceedings (OSTI)

Advances in Conjugated Linoleic Acid Research, Vol 2 Chapter 9 Animal Feeding Strategies for Conjugated Linoleic Acid Enrichment of Milk Health Nutrition Biochemistry eChapters Health - Nutrition - Biochemistry 735D98CA0ABF7C8A10664FCCD

404

A system dynamics approach for managing the LNG procurement for an offshore platform feeding a power plant  

Science Conference Proceedings (OSTI)

The purpose of this study was the development of a simulation model to verify the logistic feasibility of the construction of a new regazification offshore terminal feeding a power plant located in Africa, subjected to a possible future doubling. In ... Keywords: logistics, simulation, system dynamics, what if analysis

Enrico Briano; Claudia Caballini; Davide Modula; Roberto Revetria; Alessandro Testa

2010-10-01T23:59:59.000Z

405

Introduction Aphids, or plant lice, feed on most vegetable crops, many houseplants and many ornamentals grown in  

E-Print Network (OSTI)

and vegetable crops. Horticultural oil sprays can help to control some aphids on fruit trees and ornamentalsAphids Introduction Aphids, or plant lice, feed on most vegetable crops, many houseplants and many tissue and remove the sap. Aphids can easily be distinguished by the two tube like appendages (cornicles

New Hampshire, University of

406

The Feed-Back from a Biodevices and Cellular Nano-Electronics Course Learned in an Electrical Engineering Faculty  

Science Conference Proceedings (OSTI)

This paper reports the feed-back from a pilot new course, proposed in 2005 and accepted in 2006 for next years at the Polytechnic University of Bucharest, Romania, Faculty of Electronics, Microsystems Specialization at master studies. The BioNEC course ... Keywords: Bio-Learning, Electronics, Evaluation

Cristian Ravariu

2008-07-01T23:59:59.000Z

407

TamingtheCellulosic BiofuelsSupplyChain  

E-Print Network (OSTI)

TamingtheCellulosic BiofuelsSupplyChain: DistributedBiomassProcessingfor SustainableBiofuelsandAnimalFeeds Supplying adequate cellulosic biomass to biorefineries is emerging as a crucial issue in biofuel systems. We addresss this problem by pretreating cellulosic biomass using the ammonia fiber expansion (AFEX) process

Grissino-Mayer, Henri D.

408

Development of an Accurate Feed-Forward Temperature Control Tankless Water Heater  

SciTech Connect

The following document is the final report for DE-FC26-05NT42327: Development of an Accurate Feed-Forward Temperature Control Tankless Water Heater. This work was carried out under a cooperative agreement from the Department of Energy's National Energy Technology Laboratory, with additional funding from Keltech, Inc. The objective of the project was to improve the temperature control performance of an electric tankless water heater (TWH). The reason for doing this is to minimize or eliminate one of the barriers to wider adoption of the TWH. TWH use less energy than typical (storage) water heaters because of the elimination of standby losses, so wider adoption will lead to reduced energy consumption. The project was carried out by Building Solutions, Inc. (BSI), a small business based in Omaha, Nebraska. BSI partnered with Keltech, Inc., a manufacturer of electric tankless water heaters based in Delton, Michigan. Additional work was carried out by the University of Nebraska and Mike Coward. A background study revealed several advantages and disadvantages to TWH. Besides using less energy than storage heaters, TWH provide an endless supply of hot water, have a longer life, use less floor space, can be used at point-of-use, and are suitable as boosters to enable alternative water heating technologies, such as solar or heat-pump water heaters. Their disadvantages are their higher cost, large instantaneous power requirement, and poor temperature control. A test method was developed to quantify performance under a representative range of disturbances to flow rate and inlet temperature. A device capable of conducting this test was designed and built. Some heaters currently on the market were tested, and were found to perform quite poorly. A new controller was designed using model predictive control (MPC). This control method required an accurate dynamic model to be created and required significant tuning to the controller before good control was achieved. The MPC design was then implemented on a prototype heater that was being developed simultaneously with the controller development. (The prototype's geometry and components are based on a currently marketed heater, but several improvements have been made.) The MPC's temperature control performance was a vast improvement over the existing controller. With a benchmark for superior control performance established, five additional control methods were tested. One problem with MPC control is that it was found to be extremely difficult to implement in a TWH, so that it is unlikely to be widely adopted by manufacturers. Therefore the five additional control methods were selected based on their simplicity; each could be implemented by a typical manufacturer. It was found that one of these methods performed as well as MPC, or even better under many circumstances. This method uses a Feedback-Compensated Feed-Forward algorithm that was developed for this project. Due to its simplicity and excellent performance this method was selected as the controller of choice. A final higher-capacity prototype heater that uses Feedback-Compensated Feed-Forward control was constructed. This prototype has many improvements over the currently marketed heaters: (1) excellent control; (2) a modular design that allows for different capacity heaters to be built easily; (3) built-in fault detection and diagnosis; (4) a secondary remote user-interface; and (5) a TRIAC switching algorithm that will minimize 'flicker factor'. The design and engineering of this prototype unit will allow it to be built without an increase in cost, compared with the currently marketed heater. A design rendering of the new product is shown below. It will be launched with a new marketing campaign by Keltech in early 2009.

David Yuill

2008-06-30T23:59:59.000Z

409

MBM fuel feeding system design and evaluation for FBG pilot plant  

Science Conference Proceedings (OSTI)

Highlights: Black-Right-Pointing-Pointer A 1-5 g/s fuel feeding system for pilot scale FBG was designed, built and tested. Black-Right-Pointing-Pointer Multiple conveying stages improve pressure balancing, flow control and stability. Black-Right-Pointing-Pointer Secondary conveyor stage reduced output irregularity from 47% to 15%. Black-Right-Pointing-Pointer Pneumatic air sparging effective in dealing with poor flow ability of MBM powder. Black-Right-Pointing-Pointer Pneumatic injection port plugs with char at gasification temperature of 850 Degree-Sign C. - Abstract: A biomass fuel feeding system has been designed, constructed and evaluated for a fluidized bed gasifier (FBG) pilot plant at the University of Saskatchewan (Saskatoon, SK, Canada). The system was designed for meat and bone meal (MBM) to be injected into the gasifier at a mass flow-rate range of 1-5 g/s. The designed system consists of two stages of screw conveyors, including a metering stage which controlled the flow-rate of fuel, a rotary airlock and an injection conveyor stage, which delivered that fuel at a consistent rate to the FBG. The rotary airlock which was placed between these conveyors, proved unable to maintain a pressure seal, thus the entire conveying system was sealed and pressurized. A pneumatic injection nozzle was also fabricated, tested and fitted to the end of the injection conveyor for direct injection and dispersal into the fluidized bed. The 150 mm metering screw conveyor was shown to effectively control the mass output rate of the system, across a fuel output range of 1-25 g/s, while the addition of the 50 mm injection screw conveyor reduced the irregularity (error) of the system output rate from 47% to 15%. Although material plugging was found to be an issue in the inlet hopper to the injection conveyor, the addition of air sparging ports and a system to pulse air into those ports was found to successfully eliminate this issue. The addition of the pneumatic injection nozzle reduced the output irregularity further to 13%, with an air supply of 50 slpm as the minimum air supply to drive this injector. After commissioning of this final system to the FBG reactor, the injection nozzle was found to plug with char however, and was subsequently removed from the system. Final operation of the reactor continues satisfactorily with the two screw conveyors operating at matching pressure with the fluidized bed, with the output rate of the system estimated based on system characteristic equations, and confirmed by static weight measurements made before and after testing. The error rate by this method is reported to be approximately 10%, which is slightly better than the estimated error rate of 15% for the conveyor system. The reliability of this measurement prediction method relies upon the relative consistency of the physical properties of MBM with respect to its bulk density and feeding characteristics.

Campbell, William A., E-mail: bill.campbell@usask.ca [Fluidization Laboratory of Saskatchewan (FLASK) (Canada) and Department of Chemical and Biological Engineering, University of Saskatchewan (Canada); Fonstad, Terry [Department of Chemical and Biological Engineering, University of Saskatchewan (Canada); Pugsley, Todd [Suncor Energy Inc., Calgary, Alberta (Canada); Gerspacher, Regan [Fluidization Laboratory of Saskatchewan (FLASK) (Canada); Department of Chemical and Biological Engineering, University of Saskatchewan (Canada)

2012-06-15T23:59:59.000Z

410

Expulsion of Symbiotic Algae during Feeding by the Green Hydra a Mechanism for Regulating Symbiont Density?  

E-Print Network (OSTI)

Background: Algal-cnidarian symbiosis is one of the main factors contributing to the success of cnidarians, and is crucial for the maintenance of coral reefs. While loss of the symbionts (such as in coral bleaching) may cause the death of the cnidarian host, over-proliferation of the algae may also harm the host. Thus, there is a need for the host to regulate the population density of its symbionts. In the green hydra, Chlorohydra viridissima, the density of symbiotic algae may be controlled through host modulation of the algal cell cycle. Alternatively, Chlorohydra may actively expel their endosymbionts, although this phenomenon has only been observed under experimentally contrived stress conditions. Principal Findings: We show, using light and electron microscopy, that Chlorohydra actively expel endosymbiotic algal cells during predatory feeding on Artemia. This expulsion occurs as part of the apocrine mode of secretion from the endodermal digestive cells, but may also occur via an independent exocytotic mechanism. Significance: Our results demonstrate, for the first time, active expulsion of endosymbiotic algae from cnidarians under natural conditions. We suggest this phenomenon may represent a mechanism whereby cnidarians can expel excess symbiotic algae when an alternative form of nutrition is available in the form of prey.

Yelena Fishman; Eliahu Zlotkin; Daniel Sher

2007-01-01T23:59:59.000Z

411

Catalytic multi-stage process for hydroconversion and refining hydrocarbon feeds  

DOE Green Energy (OSTI)

A multi-stage catalytic hydrogenation and hydroconversion process for heavy hydrocarbon feed materials such as coal, heavy petroleum fractions, and plastic waste materials. In the process, the feedstock is reacted in a first-stage, back-mixed catalytic reactor with a highly dispersed iron-based catalyst having a powder, gel or liquid form. The reactor effluent is pressure-reduced, vapors and light distillate fractions are removed overhead, and the heavier liquid fraction is fed to a second stage back-mixed catalytic reactor. The first and second stage catalytic reactors are operated at 700-850.degree. F. temperature, 1000-3500 psig hydrogen partial pressure and 20-80 lb./hr per ft.sup.3 reactor space velocity. The vapor and light distillates liquid fractions removed from both the first and second stage reactor effluent streams are combined and passed to an in-line, fixed-bed catalytic hydrotreater for heteroatom removal and for producing high quality naphtha and mid-distillate or a full-range distillate product. The remaining separator bottoms liquid fractions are distilled at successive atmospheric and vacuum pressures, low and intermediate-boiling hydrocarbon liquid products are withdrawn, and heavier distillate fractions are recycled and further upgraded to provide additional low-boiling hydrocarbon liquid products. This catalytic multistage hydrogenation process provides improved flexibility for hydroprocessing the various carbonaceous feedstocks and adjusting to desired product structures and for improved economy of operations.

Comolli, Alfred G. (Yardley, PA); Lee, Lap-Keung (Cranbury, NJ)

2001-01-01T23:59:59.000Z

412

Options for converting excess plutonium to feed for the MOX fuel fabrication facility  

SciTech Connect

The storage and safekeeping of excess plutonium in the United States represents a multibillion-dollar lifecycle cost to the taxpayers and poses challenges to National Security and Nuclear Non-Proliferation. Los Alamos National Laboratory is considering options for converting some portion of the 13 metric tons of excess plutonium that was previously destined for long-term waste disposition into feed for the MOX Fuel Fabrication Facility (MFFF). This approach could reduce storage costs and security ri sks, and produce fuel for nuclear energy at the same time. Over the course of 30 years of weapons related plutonium production, Los Alamos has developed a number of flow sheets aimed at separation and purification of plutonium. Flow sheets for converting metal to oxide and for removing chloride and fluoride from plutonium residues have been developed and withstood the test oftime. This presentation will address some potential options for utilizing processes and infrastructure developed by Defense Programs to transform a large variety of highly impure plutonium into feedstock for the MFFF.

Watts, Joe A [Los Alamos National Laboratory; Smith, Paul H [Los Alamos National Laboratory; Psaras, John D [Los Alamos National Laboratory; Jarvinen, Gordon D [Los Alamos National Laboratory; Costa, David A [Los Alamos National Laboratory; Joyce, Jr., Edward L [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

413

Distributions of 15 elements on 58 absorbers from simulated Hanford Double-Shell Slurry Feed (DSSF)  

SciTech Connect

As part of the Hanford Tank Waste Remediation System program at Los Alamos, we evaluated 58 commercially available or experimental absorber materials for their ability to remove hazardous components from high-level waste. These absorbers included cation and anion exchange resins, inorganic exchangers, composite absorbers, pillared layered materials, and a series of liquid extractants sorbed on porous support-beads. We tested these absorbers with a solution that simulates Hanford double-shell slurry feed (DSSF) (pH 14.0). To this simulant solution we added the appropriate radionuclides and used gamma spectrometry to measure fission products (Ce, Cs, Sr, Tc, and Y), actinides (U and Am), and matrix elements (Cr, Co, Fe, Mn, Ni, V, Zn, and Zr). For each of 870 element/absorber combinations, we measured distribution coefficients for dynamic contact periods of 30 min, 2 h, and 6 h to obtain information about sorption kinetics. On the basis of these 2610 measured distribution coefficients, we determined that many of the tested absorbers may be suitable for processing DSSF solutions.

Marsh, S.F. [Sandia National Labs., Albuquerque, NM (United States); Svitra, Z.V.; Bowen, S.M. [Los Alamos National Lab., NM (United States)

1994-11-01T23:59:59.000Z

414

Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report  

Science Conference Proceedings (OSTI)

As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform the needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume contains appendixes on pump design, cavitation damage, performance testing, hydraulics, two-phase flow in pumps, flow stability, and rotor dynamics.

Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G.

1982-03-01T23:59:59.000Z

415

A Low-Carbon Fuel Standard for California Part 1: Technical Analysis  

E-Print Network (OSTI)

farmer practices through biorefineries may be prohibitivelygasification, and pyrolysis biorefineries all derive their700 tons per day feedstock) biorefineries using a variety of

2007-01-01T23:59:59.000Z

416

Creating Markets for Green Biofuels: Measuring and improving environmental performance  

E-Print Network (OSTI)

deserve to be called biorefineries. Rather than producingprofiles of several biorefineries are detailed in Section 6.emissions from biorefineries is relatively straightforward:

Turner, Brian T.; Plevin, Richard J.; O'Hare, Michael; Farrell, Alexander E.

2007-01-01T23:59:59.000Z

417

Life-Cycle Water Impacts of U.S. Transportation Fuels  

E-Print Network (OSTI)

displaced by cellulosic biorefineries exports to the grid,U.S. Corn Grain-to-Ethanol Biorefineries (Data Source: (assumes that future biorefineries will be hybrids, capable

Scown, Corinne Donahue

2010-01-01T23:59:59.000Z

418

Interactions of Lignin and Hemicellulose and Effects on Biomass Deconstruction  

E-Print Network (OSTI)

hydrolyzates in cellulosic biorefineries into high valuegreat promise for use in biorefineries on dry-lands and thethat the future biorefineries can bypass the lignocellulosic

Li, Hongjia

2012-01-01T23:59:59.000Z

419

A Low-Carbon Fuel Standard for California, Part 1: Technical Analysis  

E-Print Network (OSTI)

farmer practices through biorefineries may be prohibitivelygasification, and pyrolysis biorefineries all derive their700 tons per day feedstock) biorefineries using a variety of

Farrell, Alexander E.; Sperling, Dan

2007-01-01T23:59:59.000Z

420

Life Cycle Regulation of Transportation Fuels: Uncertainty and its Policy Implications  

E-Print Network (OSTI)

62 Default ethanol biorefineries modeled in GREET. Energyethanol facility. Corn biorefineries are generally built5.1: Default ethanol biorefineries modeled in GREET. Energy

Plevin, Richard Jay

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Understanding Substrate Features Influenced by Pretreatments that Limit Biomass Deconstruction by Enzymes  

E-Print Network (OSTI)

B, Kamm M: Principles of biorefineries. Applied MicrobiologyGirio FM: Hemicellulose biorefineries: a review on biomassB, Kamm M: Principles of biorefineries. Applied Microbiology

Gao, Xiadi

2013-01-01T23:59:59.000Z

422

State Clean Energy Policies Analysis (SCEPA) Project: An Analysis of Renewable Energy Feed-in Tariffs in the United States  

NLE Websites -- All DOE Office Websites (Extended Search)

51 51 Revised June 2009 State Clean Energy Policies Analysis (SCEPA) Project: An Analysis of Renewable Energy Feed-in Tariffs in the United States Toby Couture E3 Analytics Karlynn Cory National Renewable Energy Laboratory National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Technical Report NREL/TP-6A2-45551 Revised June 2009 State Clean Energy Policies Analysis (SCEPA) Project: An Analysis of Renewable Energy Feed-in Tariffs in the United States Toby Couture E3 Analytics Karlynn Cory

423

[Recycle of contaminated scrap metal]: Task 1.3.2, Bulk solids feed system. Topical report, October 1993-- January 1996  

Science Conference Proceedings (OSTI)

A critical requirement in DOE`s efforts to recycle, reuse, and dispose of materials from its decontamination and decommissioning activities is the design of a robust system to process a wide variety of bulk solid feeds. The capability to process bulk solids will increase the range of materials and broaden the application of Catalytic Extraction Processing (CEP). The term bulk solids refers to materials that are more economically fed into the top of a molten metal bath than by submerged injection through a tuyere. Molten Metal Technology, Inc. (MMT) has characterized CEP`s ability to process bulk solid feed materials and has achieved significant growth in the size of bulk solid particles compatible with Catalytic Extraction Processing. Parametric experimental studies using various feed materials representative of the components of various DOE waste streams have validated design models which establish the reactor operating range as a function of feed material, mass flow rate, and particle size. MMT is investigating the use of a slurry system for bulk solid addition as it is the most efficient means for injecting soils, sludges, and similar physical forms into a catalytic processing unit. MMT is continuing to evaluate condensed phase product removal systems and alternative energy addition sources to enhance the operating efficiency of bulk solids CEP units. A condensed phase product removal system capable of on-demand product removal has been successfully demonstrated. MMT is also investigating the use of a plasma arc torch to provide supplemental heating during bulk solids processing. This comprehensive approach to bulk solids processing is expected to further improve overall process efficiency prior to the deployment of CEP for the recycle, reuse, and disposal of materials from DOE decontamination and decommissioning Activities.

NONE

1996-07-01T23:59:59.000Z

424

R&D to Prepare and Characterize Robust Coal/Biomass Mixtures for Direct Co-Feeding into Gasification  

NLE Websites -- All DOE Office Websites (Extended Search)

to Prepare and Characterize Robust to Prepare and Characterize Robust Coal/Biomass Mixtures for Direct Co-Feeding into Gasification Background Domestically abundant coal is a significant primary energy source and, when mixed with optimum levels of biomass, has lower carbon footprint compared to conventional petroleum fuels. Coal and biomass mixtures are converted via gasification into synthesis gas (syngas), a mixture of predominantly carbon monoxide and hydrogen, which can be subsequently converted to produce liquid fuels and

425

Are state renewable feed-in tariff initiatives truly throttled by Federal statutes after the FERC California decision?  

Science Conference Proceedings (OSTI)

For the last few years, several local and state governments have adopted ''feed-in tariffs'' to promote development of dispersed, small-scale renewable generation through incentive pricing. Most FITs are intended to stimulate development of small solar or renewable energy facilities. In July, FERC issued a decision restating that the Federal Power Act and PURPA 210, not state (or local) legislation, govern the price that local utilities may pay under FITs. (author)

Yaffe, David P.

2010-10-15T23:59:59.000Z

426

Review and Assessment of Commercial Vendors/Options for Feeding and Pumping Biomass Slurries for Hydrothermal Liquefaction  

Science Conference Proceedings (OSTI)

The National Advanced Biofuels Consortium is working to develop improved methods for producing high-value hydrocarbon fuels. The development of one such method, the hydrothermal liquefaction (HTL) process, is being led by the Pacific Northwest National Laboratory (PNNL). The HTL process uses a wet biomass slurry at elevated temperatures (i.e., 300 to 360C [570 to 680F]) and pressures above the vapor pressure of water (i.e., 15 to 20 MPa [2200 to 3000 psi] at these temperatures) to facilitate a condensed-phase reaction medium. The process has been successfully tested at bench-scale and development and testing at a larger scale is required to prove the viability of the process at production levels. Near-term development plans include a pilot-scale system on the order of 0.5 to 40 gpm, followed by a larger production-scale system on the order of 2000 dry metric tons per day (DMTPD). A significant challenge to the scale-up of the HTL process is feeding a highly viscous fibrous biomass wood/corn stover feedstock into a pump system that provides the required 3000 psi of pressure for downstream processing. In October 2011, PNNL began investigating commercial feed and pumping options that would meet these HTL process requirements. Initial efforts focused on generating a HTL feed and pump specification and then providing the specification to prospective vendors to determine the suitability of their pumps for the pilot-scale and production-scale plants. Six vendors were identified that could provide viable equipment to meet HTL feed and/or pump needs. Those six vendors provided options consisting three types of positive displacement pumps (i.e., diaphragm, piston, and lobe pumps). Vendors provided capabilities and equipment related to HTL application. This information was collected, assessed, and summarized and is provided as appendices to this report.

Berglin, Eric J.; Enderlin, Carl W.; Schmidt, Andrew J.

2012-11-01T23:59:59.000Z

427

Results of Aging Tests of Vendor-Produced Blended Feed Simulant  

SciTech Connect

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is procuring through Pacific Northwest National Laboratory (PNNL) a minimum of five 3,500 gallon batches of waste simulant for Phase 1 testing in the Pretreatment Engineering Platform (PEP). To make sure that the quality of the simulant is acceptable, the production method was scaled up starting from laboratory-prepared simulant through 15-gallon vendor prepared simulant and 250-gallon vendor prepared simulant before embarking on the production of the 3500-gallon simulant batch by the vendor. The 3500-gallon PEP simulant batches were packaged in 250-gallon high molecular weight polyethylene totes at NOAH Technologies. The simulant was stored in an environmentally controlled environment at NOAH Technologies within their warehouse before blending or shipping. For the 15-gallon, 250-gallon, and 3500-gallon batch 0, the simulant was shipped in ambient temperature trucks with shipment requiring nominally 3 days. The 3500-gallon batch 1 traveled in a 70-75F temperature controlled truck. Typically the simulant was uploaded in a PEP receiving tank within 24-hours of receipt. The first uploading required longer with it stored outside. Physical and chemical characterization of the 250-gallon batch was necessary to determine the effect of aging on the simulant in transit from the vendor and in storage before its use in the PEP. Therefore, aging tests were conducted on the 250-gallon batch of the vendor-produced PEP blended feed simulant to identify and determine any changes to the physical characteristics of the simulant when in storage. The supernate was also chemically characterized. Four aging scenarios for the vendor-produced blended simulant were studied: 1) stored outside in a 250-gallon tote, 2) stored inside in a gallon plastic bottle, 3) stored inside in a well mixed 5-L tank, and 4) subject to extended temperature cycling under summer temperature conditions in a gallon plastic bottle. The following series of aging tests were conducted to accomplish these objectives.

Russell, Renee L.; Buchmiller, William C.; Cantrell, Kirk J.; Peterson, Reid A.; Rinehart, Donald E.

2009-04-21T23:59:59.000Z

428

Initial Investigation of Waste Feed Delivery Tank Mixing and Sampling Issues  

SciTech Connect

The Hanford tank farms contractor will deliver waste to the Waste Treatment Plant (WTP) from a staging double-shell tank. The WTP broadly classifies waste it receives in terms of Envelopes, each with different limiting properties and composition ranges. Envelope A, B, and C wastes are liquids that can include up to 4% entrained solids that can be pumped directly from the staging DST without mixing. Envelope D waste contains insoluble solids and must be mixed before transfer. The mixing and sampling issues lie within Envelope D solid-liquid slurries. The question is how effectively these slurries are mixed and how representative the grab samples are that are taken immediately after mixing. This report summarizes the current state of knowledge concerning jet mixing of wastes in underground storage tanks. Waste feed sampling requirements are listed, and their apparent assumption of uniformity by lack of a requirement for sample representativeness is cited as a significant issue. The case is made that there is not an adequate technical basis to provide such a sampling regimen because not enough is known about what can be achieved in mixing and distribution of solids by use of the baseline submersible mixing pump system. A combined mixing-sampling test program is recommended to fill this gap. Historical Pacific Northwest National Laboratory project and tank farms contractor documents are used to make this case. A substantial investment and progress are being made to understand mixing issues at the WTP. A summary of the key WTP activities relevant to this project is presented in this report. The relevant aspects of the WTP mixing work, together with a previously developed scaled test strategy for determining solids suspension with submerged mixer pumps (discussed in Section 3) provide a solid foundation for developing a path forward.

Fort, James A.; Bamberger, Judith A.; Meyer, Perry A.; Stewart, Charles W.

2007-10-01T23:59:59.000Z

429

NOBLE METAL CHEMISTRY AND HYDROGEN GENERATION DURING SIMULATED DWPF MELTER FEED PREPARATION  

DOE Green Energy (OSTI)

Simulations of the Defense Waste Processing Facility (DWPF) Chemical Processing Cell vessels were performed with the primary purpose of producing melter feeds for the beaded frit program plus obtaining samples of simulated slurries containing high concentrations of noble metals for off-site analytical studies for the hydrogen program. Eight pairs of 22-L simulations were performed of the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) cycles. These sixteen simulations did not contain mercury. Six pairs were trimmed with a single noble metal (Ag, Pd, Rh, or Ru). One pair had all four noble metals, and one pair had no noble metals. One supporting 4-L simulation was completed with Ru and Hg. Several other 4-L supporting tests with mercury have not yet been performed. This report covers the calculations performed on SRNL analytical and process data related to the noble metals and hydrogen generation. It was originally envisioned as a supporting document for the off-site analytical studies. Significant new findings were made, and many previous hypotheses and findings were given additional support as summarized below. The timing of hydrogen generation events was reproduced very well within each of the eight pairs of runs, e.g. the onset of hydrogen, peak in hydrogen, etc. occurred at nearly identical times. Peak generation rates and total SRAT masses of CO{sub 2} and oxides of nitrogen were reproduced well. Comparable measures for hydrogen were reproduced with more variability, but still reasonably well. The extent of the reproducibility of the results validates the conclusions that were drawn from the data.

Koopman, D

2008-06-25T23:59:59.000Z

430

Feed Materials Production Center waste management plan (Revision to NLCO-1100, R. 6)  

Science Conference Proceedings (OSTI)

In the process of producing uranium metal products used in Department of Energy (DOE) defense programs at other DOE facilities, various types of wastes are generated at the Feed Materials Production Center (FMPC). Process wastes, both generated and stored, are discussed in the Waste Management Plan and include low-level radioactive waste (LLW), mixed hazardous/radioactive waste, and sanitary/industrial waste. Scrap metal waste and wastes requiring special remediation are also addressed in the Plan. The Waste Management Plan identifies the comprehensive programs developed to address safe storage and disposition of all wastes from past, present, and future operations at the FMPC. Waste streams discussed in this Plan are representative of the wastes generated and waste types that concern worker and public health and safety. Budgets and schedules for implementation of waste disposition are also addressed. The waste streams receiving the largest amount of funding include LLW approved for shipment by DOE/ORO to the Nevada Test Site (NTS) (MgF/sub 2/, slag leach filter cake, and neutralized raffinate); remedial action wastes (waste pits, K-65 silo waste); thorium; scrap metal (contaminated and noncontaminated ferrous and copper scrap); construction rubble and soil generated from decontamination and decommissioning of outdated facilities; and low-level wastes that will be handled through the Low-Level Waste Processing and Shipping System (LLWPSS). Waste Management milestones are also provided. The Waste Management Plan is divided into eight major sections: Introduction; Site Waste and Waste Generating Process; Strategy; Projects and Operations; Waste Stream Budgets; Milestones; Quality Assurance for Waste Management; and Environmental Monitoring Program.

Watts, R.E.; Allen, T.; Castle, S.A.; Hopper, J.P.; Oelrich, R.L.

1986-10-15T23:59:59.000Z

431

Combined cycle electric power plant and a heat recovery steam generator having improved boiler feed pump flow control  

SciTech Connect

A combined cycle electric power plant is described that includes gas and steam turbines and a steam generator for recovering the heat in the exhaust gases exited from the gas turbine and for using the recovered heat to produce and supply steam to the steam turbine. The steam generator includes an economizer tube and a high pressure evaporator tube and a boiler feed pump for directing the heat exchange fluid serially through the aforementioned tubes. A condenser is associated with the steam turbine for converting the spent steam into condensate water to be supplied to a deaerator for removing undesired air and for preliminarily heating the water condensate before being pumped to the economizer tube. Condensate flow through the economizer tube is maintained substantially constant by maintaining the boiler feed pump at a predetermined, substantially constant rate. A bypass conduit is provided to feed back a portion of the flow heated in the economizer tube to the deaerator; the portion being equal to the difference between the constant flow through the economizer tube and the flow to be directed through the high pressure evaporator tube as required by the steam turbine for its present load.

Martz, L.F.; Plotnick, R.J.

1976-06-29T23:59:59.000Z

432

Columbia River White Sturgeon Genetics and Early Life History: Population Segregation and Juvenile Feeding Behavior, 1987 Final Report.  

DOE Green Energy (OSTI)

The geographic area of the genetics study broadly covered the distribution range of sturgeon in the Columbia from below Bonneville Dam at Ilwaco at Lake Roosevelt, the Upper Snake River, and the Kootenai River. The two remote river sections provided data important for enhancement considerations. There was little electrophoretic variation seen among individuals from the Kootenai River. Upper Snake river sturgeon showed a higher percentage of polymorphic loci than the Kootenai fish, but lower than the other areas in the Columbia River we sampled. Sample size was increased in both Lake Roosevelt and at Electrophoretic variation was specific to an individual sampling area in several cases and this shaped our conclusions. The 1987 early life history studies concentrated on the feeding behavior of juvenile sturgeon. The chemostimulant components in prey attractive to sturgeon were examined, and the sensory systems utilized by foraging sturgeon were determined under different environmental conditions. These results were discussed with regard to the environmental changes that have occurred in the Columbia River. Under present river conditions, the feeding mechanism of sturgeon is more restricted to certain prey types, and their feeding range may be limited. In these situations, enhancement measures cannot be undertaken without consideration given to the introduction of food resources that will be readily available under present conditions. 89 refs., 7 figs., 11 tabs.

Brannon, Ernest L.

1988-06-01T23:59:59.000Z

433

Bite performance and feeding kinematics in loggerhead turtles (Caretta caretta) within the context of longline fishery interactions  

E-Print Network (OSTI)

Feeding biomechanics and foraging behavior are likely contributors to loggerhead sea turtle (Caretta caretta) bycatch in the pelagic longline fishery. To investigate these contributions, loggerhead bite performance was measured in several size classes of captive-reared juveniles, captive sub-adults and adults, as well as wild loggerheads. A kinematic study was conducted to investigate loggerhead interactions with modified longline hooks. Kinematic and behavioral variables were assessed in relation to five longline hooks to determine if loggerhead feeding behavior is modulated relative to hook type, size, and offset. The bite force study demonstrated that mean maximum post-hatchling bite force was 2.5N and mass was the best predictor of post-hatchling bite force. Mean maximum bite force of juveniles with mean straight carapace length (SCL) of 12, 31, 44, and 65 cm were 27, 152, 343, and 374 N, respectively. Sub-adult and adult mean maximum bite force was 575 N. Maximum bite force had a positive linear relationship with all head and body morphometrics (P<0.001). Carapace width was the best predictor of bite force throughout ontogeny. The kinematic study demonstrated no differences between hook treatments in all kinematic variables analyzed. The results of this study suggest loggerhead feeding behavior may be stereotypical. Only 33% of all interactions resulted in hooking events. Hooking was lowest in 16 gage circle hooks with no offset and the 18 gage circle hooks with 10offset which may be indicative of a lower possibility of the turtle drowning. Hooking was highest in the 16 gage circle hooks with 10offset. The proportion of turtles hooked in the mouth was significantly greater than those hooked in the throat (P=0.001). Sixteen gage circle hooks with 10 offset had the highest percentage of throat hooking, and the 18 gage circle hooks without offset resulted in the lowest percentage of throat hooking. When interacting with J hooks with a 25 offset (9 gage), turtles mostly oriented their head away from the hook offset; however, when interacting with the 16 and 18 gage circle hooks with 10 offset, turtles mostly oriented their heads toward the hook offset. These data suggest that turtles may distinguish between small and large offsets, and may modulate their feeding behavior accordingly. Alternatively, turtles may be detecting hook size or hook shape. A more thorough characterization of loggerhead bite performance and feeding kinematics will be useful when developing or modifying longline fishery gear aimed at reducing loggerhead bycatch.

Guzman, Alejandra

2008-05-01T23:59:59.000Z

434

Stable isotope assessment of temporal and geographic differences in feeding ecology of northern fur seals (Callorhinus ursinus)  

E-Print Network (OSTI)

The feeding ecology of northern fur seals (Callorhinus ursinus) and their primary prey was examined by analyzing their skin tissues for stable-carbon and nitrogen isotope content. The Pribilof Island northern fur seal population was designated as depleted in 1988 because their numbers were, and continue to be, below their optimum sustainable population. The primary cause for this decline is thought to be a decrease in their prey base in the eastern Bering Sea. Determination of fur seal feeding ecology is important so that disturbances in prey availability can be further studied. This study was able to augment current northern fur seal dietary knowledge using stable-carbon and nitrogen isotope analysis. Parturient and lactating female and juvenile male skin tissue and prey items were analyzed. Female and male tissues were collected in July, August and November, and July and August, 1997, respectively, from both St. Paul and St. George Islands. July/August samples represented spring migratory diet, while November samples illustrated breeding season diet. Females were found to be more enriched isotopically in ?N and C over juvenile males during their migration. November females on St. Paul island were enriched in ?N over July/August females, while St. George females were not significantly enriched. July/August females on St. George Island were more enriched in C over November females, while St. Paul females were not significantly enriched. There were no differences in ?N or C enrichment for migratory animals of the some sex traveling to either island, and there was no difference in ?N between islands for November females. There was a significant difference in C values between islands for November females with St. Paul being more enriched. Prey analysis showed step-wise enrichments for two species and prey stable isotope values were compared to fur seal values for an estimation of dietary content. Females appear to be feeding at a higher trophic level and feeding more coastally than males during migration. Migratory females appear to be feeding more coastally than breeding season females.

Kurle, Carolyn Mary

1998-01-01T23:59:59.000Z

435

Designing Soybeans for the 21st Century MarketsChapter 13 Development of Tools to Study Immune-Mediated Allergenic Responses to Food and Feed  

Science Conference Proceedings (OSTI)

Designing Soybeans for the 21st Century Markets Chapter 13 Development of Tools to Study Immune-Mediated Allergenic Responses to Food and Feed Biofuels and Bioproducts and Biodiesel Food Science Health Nutrition Biochemistry Processing

436

Carotenoids & Retinoids; Molecular Aspects and Health IssuesChapter 13 Effect of Feeding and Then Depleteing a High Fruit and Vegetable Diet on Oxidizability in Human Serum  

Science Conference Proceedings (OSTI)

Carotenoids & Retinoids; Molecular Aspects and Health Issues Chapter 13 Effect of Feeding and Then Depleteing a High Fruit and Vegetable Diet on Oxidizability in Human Serum Health Nutrition Biochemistry eChapters Health - Nutrition - B

437

Feeding versus Feedback in NGC 4151 probed with Gemini NIFS. I. Excitation  

E-Print Network (OSTI)

We have used the Gemini Near-infrared Integral Field Spectrograph (NIFS) to map the emission-line intensity distributions and ratios in the Narrow-Line Region (NLR) of the Seyfert galaxy NGC 4151 in the Z, J, H and K bands at a resolving power ~ 5000, covering the inner 200 pc x 300 pc of the galaxy at a spatial resolution of 8 pc. We present intensity distributions I(r) in 14 emission lines. (1) For the ionized gas, I(r) is extended to ~ 100 pc from the nucleus along pos. angle PA=60/240 deg-- NE--SW), consistent with an origin in the known biconical outflow; while for the recombination lines I(r) ~ r^-1, for the forbidden lines I(r) is flat (r^0). (2) The H_2 emission lines intensity distributions avoid the region of the bicone, extending to r ~ 60 pc, perpendicular to the bicone axis, supporting an origin for the H_2-emitting gas in the galaxy plane. (3) The coronal lines show a steep intensity profile, described by r^-2. Using the line-ratio maps [Fe II]1.644/1.257 and Pa_b/Br_g we obtain a reddening of E(B-V)~0.5 along the NLR and E(B-V)>1 at the nucleus. Our line-ratio map [Fe II] 1.257/[P II] 1.189 is the first such map of an extragalactic source. Together with the [Fe II]/Pa_b map, these line ratios correlate with the radio intensity distribution, mapping the effects of shocks produced by the radio jet, which probably release the Fe locked in grains and produce the enhancement of the [Fe II] emission observed at ~ 1 arcsec from the nucleus. At these regions, we obtain densities N_e ~4000 cm^-3 and temperatures T_e ~ 15000K for the [Fe II]-emitting gas. For the H_2-emitting gas we obtain T ~ 2100K. The distinct intensity distributions, physical properties and locations of the ionized and molecular gas suggest that the H_2-emitting gas traces the AGN feeding, while the ionized gas traces its feedback.

T. Storchi-Bergmann; P. J. McGregor; Rogemar A. Riffel; R. Simoes-Lopes; T. Beck; M. Dopita

2008-12-12T23:59:59.000Z

438

Flow Control of Real Time Multimedia Applications Using Model Predictive Control with a Feed Forward Term  

E-Print Network (OSTI)

Multimedia applications over the Internet are getting more and more popular. While non-real-time streaming services, such as YouTube and Megavideo, are attracting millions of visiting per day, real-time conferencing applications, of which some instances are Skype and Yahoo Voice Chat, provide an interesting experience of communication. Together, they make the fancy Internet world become more and more amusing. Undoubtedly, multimedia flows will eventually dominate the computer network in the future. As the population of multimedia flows increases gradually on the Internet, quality of their service (QoS) is more of a concern. At the moment, the Internet does not have any guarantee on the quality of multimedia services. To completely surpass this limitation, modifications to the network structure is a must. However, it will take years and billions of dollars in investment to achieve this goal. Meanwhile, it is essential to find alternative ways to improve the quality of multimedia services over the Internet. In the past few years, many endeavors have been carried on to solve the problem. One interesting approach focuses on the development of end-to-end congestion control strategies for UDP multimedia flows. Traditionally, packet losses and delays have been commonly used to develop many known control schemes. Each of them only characterizes some different aspects of network congestion; hence, they are not ideal as feedback signals alone. In this research, the flow accumulation is the signal used in feedback for flow control. It has the advantage of reflecting both packet losses and delays; therefore, it is a better choice. Using network simulations, the accumulations of real-time audio applications are collected to construct adaptive flow controllers. The reason for choosing these applications is that they introduce more control challenges than non-real-time services. One promising flow control strategy was proposed by Bhattacharya and it was based on Model Predictive Control (MPC). The controller was constructed from an ARX predictor. It was demonstrated that this control scheme delivers a good QoS while reducing bandwidth use in the controlled flows by 31 percent to 44 percent. However, the controller sometime shows erratic response and bandwidth usage jumps frequently between lowest and highest values. This is not desirable. For an ideal controller, the controlled bandwidth should vary near its mean. To eliminate the deficiency in the strategy proposed by Bhattacharya, it is proposed to introduce a feed forward term into the MPC formulation, in addition to the feedback terms. Simulations show that the modified MPC strategy maintains the benefits of the Bhattacharya strategy. Furthermore, it increases the probability of bandwidth savings from 58 percent for the case of Bhattacharya model to about 99 percent for this work.

Duong, Thien Chi

2010-12-01T23:59:59.000Z

439

Results Summary Investigating the Use of Liquid CO2 Coal Slurry for Feeding Low Rank Coal to the E-Gas Gasifier  

Science Conference Proceedings (OSTI)

This report summarizes the results of US Department of Energy (DOE) Award No. DE-FE0007977, Liquid CO2/Coal Slurry for Feeding Low Rank Coal to Gasifiers, which investigates the practicality of using a liquid CO2/coal slurry preparation and feed system for the E-Gas gasifier in an integrated-gasificationcombined-cycle (IGCC) electric power generation plant configuration.Liquid CO2 (LCO2) has several property differences from water that ...

2013-12-11T23:59:59.000Z

440

HLW Feed Delivery AZ101 Batch Transfer to the Private Contractor Transfer and Mixing Process Improvements [Initial Release at Rev 2  

SciTech Connect

The primary purpose of this business case is to provide Operations and Maintenance with a detailed transfer process review for the first High Level Waste (HLW) feed delivery to the Privatization Contractor (PC), AZ-101 batch transfer to PC. The Team was chartered to identify improvements that could be implemented in the field. A significant penalty can be invoked for not providing the quality, quantity, or timely delivery of HLW feed to the PC.

DUNCAN, G.P.

2000-02-28T23:59:59.000Z

Note: This page contains sample records for the topic "feed biorefinery enerkem" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Memory characteristics of MOSFET with silicon nanoclusters formed using a pulse-type gas-feeding technique in the LPCVD system  

Science Conference Proceedings (OSTI)

The digital gas-feeding method was used in this study, with Si"2H"6 as the source gas, in a low-pressure chemical-vapor deposition system, to grow Si nanoclusters with high densities and uniform sizes. The densities of the Si nanoclusters rose to 7x10^1^1cm^-^2, ... Keywords: Digital gas-feeding, Flash memory, Nanocrystal floating-gate memory, Nonvolatile memory, Si nanocluster

Eunkyeom Kim; Kyoungmin Kim; Daeho Son; Jeongho Kim; Sunghwan Won; Wan-Shick Hong; Junghyun Sok; Kyoungwan Park

2008-12-01T23:59:59.000Z

442

Feasibility analysis of ternary feed mixtures of methane with oxygen, steam, and carbon dioxide for the production of methanol synthesis gas  

SciTech Connect

The feasibility of ternary feed mixtures of CH{sub 4} with O{sub 2}, H{sub 2}O, and CO{sub 2} is analyzed in relation to the production of methanol syngas. Stoichiometric constraints are formulated in terms of three parameters characterizing the steam, partial oxidation, and carbon dioxide reforming reactions of methane. The equilibrium analysis is conducted using the methanol balance ratio {mu} and methane slip fraction {chi} as explicit design parameters. General results are derived for the feasibility of each ternary feed combination as a function of pressure and temperature in the range 1 < {mu} < 3 under carbon-free conditions. Numerical calculations indicate that CH{sub 4}/O{sub 2}/CO{sub 2} feeds can be used in single-stage adiabatic reformers at low values of {mu}, but the produced syngas requires further treatment. Reforming based on CH{sub 4}/O{sub 2}/H{sub 2}O feeds is endothermic at {mu} {ge} 2 under typical reaction conditions, thus requiring the application of a two-stage process involving primary and secondary reformers. Utilization of CH{sub 4}/O{sub 2}/H{sub 2}O feeds in single-stage adiabatic reactors is feasible for {mu} = 1.7--1.9, yielding syngas which can be upgraded by partial CO{sub 2} removal. The endothermic CH{sub 4}/CO{sub 2}/H{sub 2}O feed combination is always feasible for 1 < {mu} < 3.

Tjatjopoulos, G.J. [Chemical Process Engineering Research Inst., Thessaloniki (Greece). Foundation for Research and Technology; Vasalos, I.A. [Aristotle Univ. of Thessaloniki (Greece). Chemical Engineering Dept.

1998-04-01T23:59:59.000Z

443

Corrosion/Erosion Resistance of Ultimet\\256 R31233 in a Simulated Feed for a Radioactive Vitrification Facility  

SciTech Connect

Corrosion, erosion and corrosion/erosion tests were performed to evaluate the performance of nickel and cobalt based alloys in a simulated sludge/borosilicate frit slurry representative of the feed preparation system for a radioactive waste vitrification facility. Alloys tested included Type 304L stainless steel, Hastelloy\\256 C-276, Stellite\\256 6B, and Ultimet\\256. Testing indicated that Ultimet\\256 had improved wear resistance and similar corrosion resistance compared to Hastelloy\\256 C-276 in the simulated sludge/frit environment.

Imrich, K.J.

1999-05-21T23:59:59.000Z

444

Indiana - U.S. Energy Information Administration (EIA) - U.S ...  

U.S. Energy Information Administration (EIA)

Renewable Fuels Association, Ethanol Biorefinery Locations, U.S. Fuel Ethanol Industry Biorefineries and Production Capacity: Florida: Renewable Energy:

445

Agricultural and Resource Economics Update  

E-Print Network (OSTI)

were able to establish biorefineries during the high-marginwhile investors in biorefineries that were launched during

2011-01-01T23:59:59.000Z

446

Sustainable use of California biomass resources can help meet state and national bioenergy targets  

E-Print Network (OSTI)

if financing and commercial biorefineries producing biofuelsVOLUME 63 , NUMBER 4 in biorefineries may have difficulty

Jenkins, Bryan M; Williams, Robert B; Gildart, Martha C; Kaffka, Stephen R.; Hartsough, Bruce; Dempster, Peter G

2009-01-01T23:59:59.000Z

447

Optimizing U.S. Mitigation Strategies for the Light-Duty Transportation Sector: What We Learn from a Bottom-Up Model  

E-Print Network (OSTI)

R. C. , Comparative economics of biorefineries based on theBioprocessing, and Biorefineries 2007, 7. Shapouri, H. ;

Yeh, Sonia; Farrell, Alexander E.; Plevin, Richard J; Sanstad, Alan; Weyant, John

2008-01-01T23:59:59.000Z

448

Can feedstock production for biofuels be sustainable in California?  

E-Print Network (OSTI)

duction levels in biorefineries using it as a feedstock. Init would be smaller and biorefineries could be centrally

Kaffka, Stephen R.

2009-01-01T23:59:59.000Z

449

A Low-Carbon Fuel Standard for California, Part 2: Policy Analysis  

E-Print Network (OSTI)

transport companies), and biorefineries. Each category ofthe sale of CO 2 from biorefineries at this time, given that

Sperling, Daniel; Farrell, Alexander

2007-01-01T23:59:59.000Z

450