Powered by Deep Web Technologies
Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Rui Fan  

NLE Websites -- All DOE Office Websites (Extended Search)

Rui Fan Rui Fan 1 Cyclotron Road MS 90-4000 Berkeley CA 94720 Office Location: 90-2087 (510) 486-6305 RFan@lbl.gov Vision & Mission Organization Awards Fellowship Staff Services...

2

Fan Dai  

NLE Websites -- All DOE Office Websites (Extended Search)

Fan Dai Fan Dai China Energy Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2002 Berkeley CA 94720 Office Location: 90-2117S (510) 486-4000 FDai@lbl.gov Fan Dai is a Ph.D. Candidate in Environmental Policy at the College of Environmental Science and Forestry, State University of New York, and a LL.M. Candidate at Berkeley School of Law, University of California. Fan's research during her stay in LBNL's China Energy Group focuses on Energy Efficiency Governance, U.S.-China Clean Energy Partnership, the Carbon Cap-and-Trade Program in California and what China can learn from California's program. Prior to LBNL, she interned at the China National Center for Climate Change Strategy and International Cooperation (NCSC), China Youth Action Climate Network (CYCAN), and China State Forestry

3

FANS - Control  

Science Conference Proceedings (OSTI)

... If set to H+ and a magnet controller is connected, you are ... Typically motors 3, 4, 5, and 6 are fixed for FANS operation A fixed motor will not be ...

4

ZHAOSHENG FAN  

NLE Websites -- All DOE Office Websites (Extended Search)

ZHAOSHENG FAN Biosciences Division, Argonne National Laboratory, Argonne, IL 60439 Phone: (630) 252-1566; email: zfan@anl.gov EDUCATION Ph.D., Soil Physics, 2007, North Dakota...

5

Museum Fan Downloads  

NLE Websites -- All DOE Office Websites (Extended Search)

Museum Fan Downloads Participate with us Participate Share your Stories Museum Fan Downloads invisible utility element Museum Fan Downloads Help the Bradbury Science Museum by...

6

EVALUATION OF TRANSITIONS FOR TESTING AGRICULTURAL VENTILATION FANS WITH THE FAN ASSESSMENT NUMERATION SYSTEM (FANS).  

E-Print Network (OSTI)

??The Fan Assessment Numeration System (FANS) is an improved air velocity traverse method for measuring in situ fan performance. The FANS has been widely used,… (more)

Lopes, Igor Moreira

2012-01-01T23:59:59.000Z

7

Fan Mei | BNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Fan Mei Postdoctoral Research Associate Fan is currently working as a postdoctoral research associate with Jian Wang, investigating aerosol microphysical properties in three recent...

8

The Lillehammer Submarine Fan Complex.  

E-Print Network (OSTI)

??Abstract The Lillehammer Submarine Fan Complex is a mixed mud/sand rich turbidite fan system. The fan complex was deposited in the Neoproterozoic Hedmark rift basin… (more)

Skaten, Maren Kristin Møllerup

2006-01-01T23:59:59.000Z

9

Ceiling Fan | Open Energy Information  

Open Energy Info (EERE)

Ceiling Fan Jump to: navigation, search TODO: Add description List of Ceiling Fan Incentives Retrieved from "http:en.openei.orgwindex.php?titleCeilingFan&oldid267151"...

10

Nien-fan Zhang  

Science Conference Proceedings (OSTI)

Nien-fan Zhang. Technical Areas of Research and Consulting: Statistical process control Time series analysis and forecasting. Awards: ...

2012-07-16T23:59:59.000Z

11

Fan Energy Savings Decisions  

E-Print Network (OSTI)

Axial fans are used for thousands of industrial applications consuming millions of kilowatts daily. The decision that saves dollars is to either automatically change fan speed or change blade pitch to save up to 50 percent of consumed power over a fixed pitch, constant speed fan. A discussion of the merits of each type is presented with actual test results.

Monroe, R. C.

1985-05-01T23:59:59.000Z

12

Record of Communication Concerning Ceiling Fan and Ceiling Fan...  

NLE Websites -- All DOE Office Websites (Extended Search)

Record of Communication Concerning Ceiling Fan and Ceiling Fan Light Kit Framework Document-Docket No. EERE-2012-BT-STD-0045 Record of Communication Concerning Ceiling Fan and...

13

INFLUENCE OF FAN OPERATION ON FAN ASSESSMENT NUMERATION SYSTEM (FANS) TEST RESULTS.  

E-Print Network (OSTI)

??The use of velocity traverses to measure in-situ air flow rate of ventilation fans can be subject to significant errors. The Fan Assessment Numeration System… (more)

Morello, Gabriela Munhoz

2011-01-01T23:59:59.000Z

14

Fan Repair Guideline  

Science Conference Proceedings (OSTI)

The successful repair of a fan component is affected by a number of different factors. These include correctly assessing the root cause of failure, determining the best repair option, implementation of proper repair procedures, and compliance with applicable codes and standards. However, in many situations the proper solution is not clearly evident. The purpose of this document is to provide guidance in the area of induced draft / forced draft fan repair. Specifically, this document deals with the repair...

2002-08-15T23:59:59.000Z

15

Smart Fan Modules And System  

DOE Patents (OSTI)

A fan module including: two or more individual fans, each fan having an air movement means and a motor engaged with the air movement means for accelerating air entering each of the two or more individual fans; a temperature sensor for sensing a temperature associated with the two or more fans and for outputting a first signal corresponding to the temperature; rotational speed sensor for outputting a second signal corresponding to a rotational speed of each of the two or more fans; and a processor for receiving the first and second signals and controlling the two or more individual fans based on the first and second signals. A fan module including: two or more individual fans, each fan having an air movement means and a motor engaged with the air movement means for accelerating air entering each of the two or more individual fans; a temperature sensor for sensing a temperature associated with the two or more fans and for outputting a first signal corresponding to the temperature; rotational speed sensor for outputting a second signal corresponding to a rotational speed of each of the two or more fans; and a processor for receiving the first and second signals and controlling the two or more individual fans based on the first and second signals.

Cipolla, Thomas M. (Katonah, NY); Kaufman, Richard I. (Somers, NY); Mok, Lawrence S. (Brewster, NY)

2003-07-15T23:59:59.000Z

16

Evaluation of the cooling fan efficiency index.  

E-Print Network (OSTI)

Evaluation of the Cooling Fan Efficiency indexfor a desk fan anda computer fan Stefano Schiavon 1,2,* , M. Sc. PhD

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

17

Fans for Cooling | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fans for Cooling Fans for Cooling Fans for Cooling May 30, 2012 - 7:46pm Addthis Ceiling fans circulate air in a room to help keep occupants cool. | Photo courtesy of ©iStockphoto/jimkruger Ceiling fans circulate air in a room to help keep occupants cool. | Photo courtesy of ©iStockphoto/jimkruger What does this mean for me? You may be able to keep your home cool with energy-efficient and well-placed fans. Fans are less expensive to operate than air conditioners. Circulating fans include ceiling fans, table fans, floor fans, and fans mounted to poles or walls. These fans create a wind chill effect that will make you more comfortable in your home, even if it's also cooled by natural ventilation or air conditioning. Ceiling Fans Ceiling fans are considered the most effective of these types of fans,

18

Introduction of a Cooling Fan Efficiency Index  

E-Print Network (OSTI)

with four cooling fans of different designs available on thedesign, installation, and use, the performance of cooling fans

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

19

The urban coffee shop  

E-Print Network (OSTI)

This thesis is an investigation of the role of the coffee shop in the urban environment throughout history. Coffee shops spread from the Arab world to Europe and then to the U.S. at the end of the seventeenth century. ...

Chadios, Konstantinos

2005-01-01T23:59:59.000Z

20

Save Energy with Axial Fans  

E-Print Network (OSTI)

There are several ways to save energy in wet cooling towers and air cooled heat exchangers using axial fans. This paper will discuss ways to improve fan system efficiency in wet and dry towers both during the design phase and after installation by specifying energy efficient equipment. Variable pitch fan versus fixed pitch fan operation is discussed in terms of energy savings and means of control. The areas of interest to wet cooling tower users would be the influence on fan diameter and operating point on horsepower, how and when are velocity recovery stacks effective, the effect of varying fan speed to improve efficiency, and tip clearance effects. The areas of interest to dry tower (air cooled heat exchanger) users would be the effect of inlet losses, approach velocity losses, and losses due to air recirculation.

Monroe, R. C.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Introduction of a Cooling Fan Efficiency Index  

E-Print Network (OSTI)

°C °F Cooling Effect (?t eq ) °C °F Fan Power, W (P f ) Cooling-Fan Efficiency (CFE) °C/W °F/Wand B. Jones. 1983. Ceiling fans as extenders of the summer

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

22

THE WORLD'S Biggest Fan Collection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WORLD'S Biggest Fan Collection WORLD'S Biggest Fan Collection If you only know the Big Ass Fan Company as the preeminent designer and manufacturer of high volume, low speed fans for factories and cows, it's time you get to know us better. While we continue to lead the way in industrial and agricultural air movement, we've also refined these designs to bring the same innovation and benefits of our famous fans to circulate an ocean of air in sound-sensitive commercial spaces and homes. And when our customers said they wanted something for smaller spaces, we listened - and we think you'll like the results. We've got you covered - ceiling to floor, wall to door! Features ï‚ž New patented airfoil system uses 10 Powerfoil airfoils, winglets and patent-pending AirFence(tm) technology to increase

23

The Internet World of Fan Fiction.  

E-Print Network (OSTI)

??Fan fiction, the most popular creative outlet for fans, allows the amateur writer an opportunity to be published and receive immediate feedback from peers. As… (more)

Herzing, Melissa Jean

2008-01-01T23:59:59.000Z

24

title Potential Global Benefits of Improved Ceiling Fan Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Fan Energy Efficiency year month keywords bottom up Ceiling fan Celing Fans efficiency energy efficiency Financial incentives Market Transformation residential Standards and...

25

A decision maker for transport protocol configuration  

Science Conference Proceedings (OSTI)

This paper proposes an approach, called Protocol Configuration Decision Maker, for TCP to dynamically adapt to a network environment. The proposed mechanism monitors the network condition with parameters like loss rate. Then it consults a knowledge ...

Jae-Hyun Hwang; Jin-Hee Choi; Chuck Yoo

2006-05-01T23:59:59.000Z

26

Livermorium team honored as dream-makers  

NLE Websites -- All DOE Office Websites (Extended Search)

3113dreammakers 05312013 Livermorium team honored as dream-makers Lynda L Seaver, LLNL, (925) 423-3103, seaver1@llnl.gov Printer-friendly Mark Stoyer addresses the crowd during...

27

Interoperability Checklist for Decision-Makers  

Science Conference Proceedings (OSTI)

In April 2007 the GridWise® Architecture Council published the Introduction to Interoperability and Decision-Maker’s Interoperability Checklist Version 1.0 as a tool to be used by policy makers and executives making smart grid policy or investment decisions. Subsequently there has been a significant amount of additional work on smart grid interoperability by the council and others. This paper summarizes the current efforts of the council to update the checklist to incorporate this subsequent work.

Melton, Ronald B.; Ambrosio, Ron

2010-12-09T23:59:59.000Z

28

Ceiling Fan and Ceiling Fan Light Kit use in the U.S. Results of a Survey on Amazon Mechanical Turk  

E-Print Network (OSTI)

Ceiling Fan and Ceiling Fan Light Kit use in the U.S. —Ceiling Fan and Ceiling Fan Light Kit use in the U.S. —fans and ceiling fan light kits in the United States (

Kantner, Colleen L.S.

2013-01-01T23:59:59.000Z

29

Sound maintenance practices protect fan investments  

Science Conference Proceedings (OSTI)

Since underground coal miners depend on axial fans, lack of maintenance could prove costly. A number of pre-emptive actions that can help keep fans running at optimal performance can also be taken. 2 photos.

Bauer, M.

2009-11-15T23:59:59.000Z

30

MECHANICAL DRAFT FANS FOR THE MODERN INCINERATOR  

E-Print Network (OSTI)

design and modiftcation. Spe cial blading and fan construction for use under corrosive conditions this will be kept fairly constant by air or water cooling during noral op eration. Since the fan will be designed. Volume control on a single inlet fan can be accomplished with a variable inlet #12;vane, designed

Columbia University

31

Building Energy Software Tools Directory: BinMaker Pro  

NLE Websites -- All DOE Office Websites (Extended Search)

States Related Links BinMaker Pro BinMaker Pro logo. Creates summaries of U.S. hourly weather data for 239 cities. BinMaker PRO exports the resulting electronic files for use...

32

Building Energy Software Tools Directory: BinMaker Pro  

NLE Websites -- All DOE Office Websites (Extended Search)

by Country Related Links BinMaker Pro BinMaker Pro logo. Creates summaries of U.S. hourly weather data for 239 cities. BinMaker PRO exports the resulting electronic files for use...

33

Development of a High Efficiency Ceiling Fan  

E-Print Network (OSTI)

The potential of ceiling fans to improve comfort during the cooling season is well documented (Rohles et al.. 1983; Fairey et al.. 1986). There are at least two cases: In the first where air conditioning is unavailable, adding ceiling fans may significantly improve building comfort and health although actually increasing energy use. However, the more common circumstance is where ceiling fans are used with the objective of providing a higher cooling system thermostat set point with acceptable comfort. Fans can also potentially avoid the use of air conditioning during "swing" seasons. Although studies commonly suggest a 2-6OF increase in the thermostat set point, data from 386 surveyed Central Florida households suggests that although fans are used an average of 13.4 hours per day, no statistically valid difference can be observed in thermostat settings between households using fans and those without them (James et al., 1996). Part of this may be due to the lack of sufficiently wide air distribution coverage within rooms (Rohles et al, 1983; Sonne and Parker, 1998). Studies touting potential cooling savings of up to 40% have usually been sponsored by fan manufacturers (eg. A.D. Little, 1981). These often make unrealistic assumptions such as presuming that occupants are within four feet of a fan with only one fan in use and a 6°F elevation of the thermostat setting. An environmental chamber study by Consumer Reports showed that the long-reported de-stratification benefits when heating are largely unsubstantiated (Consumer Reports. 1993). Thus. benefits from ceiling fans are only to reduce cooling needs and this is completely contingent on sufficient changes in interior comfort to warrant raising of the cooling thermostat. Two other factors must be taken into account in assessing the benefits of fans: their actual energy use and the added internal heat gains produced by the fans during operation. The measured electrical demand of ceiling fans varies between 5 and 115 Watts depending on model and speed selection. A power demand of 40 W at medium speed is probably typical (Chandra, 1985). Thus, a fan used for six months of the year would use 175 kwh. With 4.3 ceiling fans in an average Florida home, this amounts to about 800 kwh of fan energy consumption --about 5% of total electricity use. Also, all of the energy use of fans is eventually converted to heat within the home which must eventually be removed by ventilation air or the cooling system.

Parker, D. S.; Callahan, M. P.; Sonne, J. K.; Su, G. H.; Hibbs, B. D.

2000-01-01T23:59:59.000Z

34

Knowing fans, knowing music : an exploration of fan interaction on Twitter  

E-Print Network (OSTI)

know many local Ritter fans yet” 26 She responded about aI see you're a Buffy fanare you also a Browncoat? : )”The term Browncoats refers to fans of the short-lived sci-fi

McCollum, Nick

2011-01-01T23:59:59.000Z

35

Submitting Organization Hongyou Fan Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

&24; 2007 R&D 100 Award Entry Form &24; Submitting Organization Hongyou Fan Sandia National Laboratories Advanced Materials Laboratory 1001 University Boulevard SE Albuquerque, NM...

36

Active Noise Control of a Radial Fan.  

E-Print Network (OSTI)

??This thesis work aims at investigating the use of an active noise control (ANC) system on a radial fan. This was done by studying the… (more)

Murthy, Muddala

2009-01-01T23:59:59.000Z

37

Tea and Coffee House Laura Broome  

E-Print Network (OSTI)

of coffee in American society and the side effects that the coffee industry is creating. The documentary, and the growing trend of k-cup machines. Historically any type of brewing would have been done in a clay, ceramic

Hayden, Nancy J.

38

Advanced Energy-Efficient Filtration: Fan Filter Unit  

E-Print Network (OSTI)

Efficient Fan- Filter Units, Proceedings of SEMI TechnicalFor Evaluating Fan-Filter Unit Performance – Applications inPerformance of Fan-Filter Units, Version 1.2 (2004, public

Xu, Tengfang

2005-01-01T23:59:59.000Z

39

Advanced Energy-Efficient Filtration: Fan Filter Unit  

E-Print Network (OSTI)

Cleanrooms: Energy Efficient Fan- Filter Units, ProceedingsStandard Method For Evaluating Fan-Filter Unit Performance –Energy Performance of Fan-Filter Units, Version 1.2 (2004,

Xu, Tengfang

2005-01-01T23:59:59.000Z

40

Best Practice for Energy Efficient Cleanrooms: Fan-Filter Units  

E-Print Network (OSTI)

control F iltra ti on ? Fan Efficiency ? Right Sizing ?Energy Performance of Fan-Filte r Units, Version 1.3 (2005),RP36.1 (Draft). Testing Fan-Filter Units. Draft Recommended

Xu, Tengfang

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Operation and Maintenance Guidelines for Draft Fans  

Science Conference Proceedings (OSTI)

The reliability, efficiency, and safety of draft fans in fossil fuel power plants depend on effective operating and maintenance practices. These guidelines systematically present state-of-the-art techniques that utility personnel can use in operation, maintenance, troubleshooting, inspection, and weld repair of major fan components and auxiliary systems.

1999-05-13T23:59:59.000Z

42

The Effect of Inlet Flow Profile Distortion on Fan Performance  

Science Conference Proceedings (OSTI)

Performance tests on fans for utility and industrial applications are based on codes that expect a relatively uniform velocity profile at the fan inlet. Unfortunately, when fans scaled up from the ideal model fans are installed in actual utility and industrial applications, non-uniform or distorted flow patterns often occur at the inlet of the fan. This project sought to determine and, if possible, quantify the effect on fan performance of distorted inlet flow profiles. A second goal was to determine whe...

2010-02-22T23:59:59.000Z

43

Fan-fold shielded electrical leads  

DOE Patents (OSTI)

Disclosed are fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figs.

Rohatgi, R.R.; Cowan, T.E.

1996-06-11T23:59:59.000Z

44

Fan-fold shielded electrical leads  

DOE Patents (OSTI)

Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate.

Rohatgi, Rajeev R. (Mountain View, CA); Cowan, Thomas E. (Livermore, CA)

1996-01-01T23:59:59.000Z

45

Redesign of ceiling fan - adapted to the Scandinavian market.  

E-Print Network (OSTI)

?? The master degree thesis project, at Halmstad University, was made in cooperation with Hunter Fan, one of the leading fan companies on the American… (more)

Eliasson, Anna

2007-01-01T23:59:59.000Z

46

Potential Global Benefits of Improved Ceiling Fan Energy Efficiency  

NLE Websites -- All DOE Office Websites (Extended Search)

Global Benefits of Improved Ceiling Fan Energy Efficiency Title Potential Global Benefits of Improved Ceiling Fan Energy Efficiency Publication Type Report LBNL Report Number...

47

Characterization of air recirculation in multiple fan ventilation systems.  

E-Print Network (OSTI)

??Booster fans, large underground fans, can increase the volumetric efficiency of ventilation systems by helping to balance the pressure and quantity distribution throughout a mine,… (more)

Wempen, Jessica Michelle

2012-01-01T23:59:59.000Z

48

Procuring Solar Energy: A Guide for Federal Facility Decision Makers  

E-Print Network (OSTI)

Procuring Solar Energy: A Guide for Federal Facility Decision Makers SEPTEMBER 2010 Solar Energy: www.ntis.gov/help/ordermethods.aspx PROCURING SOLAR ENERGY: A GUIDE FOR FEDERAL FACILITY DECISION MAKERS #12;September 2010 3 Procuring Solar Energy: A Guide for Federal Facility Decision Makers Blaise

49

A utility framework for bounded-loss market makers  

E-Print Network (OSTI)

We introduce a class of utility-based market makers that always accept orders at their risk-neutral prices. We derive necessary and sufficient conditions for such market makers to have bounded loss. We prove that hyperbolic absolute risk aversion utility market makers are equivalent to weighted pseudospherical scoring rule market makers. In particular, Hanson’s logarithmic scoring rule market maker corresponds to a negative exponential utility market maker in our framework. We describe a third equivalent formulation based on maintaining a cost function that seems most natural for implementation purposes, and we illustrate how to translate among the three equivalent formulations. We examine the tradeoff between the market’s liquidity and the market maker’s worst-case loss. For a fixed bound on worst-case loss, some market makers exhibit greater liquidity near uniform prices and some exhibit greater liquidity near extreme prices, but no market maker can exhibit uniformly greater liquidity in all regimes. For a fixed minimum liquidity level, we give the lower bound of market maker’s worst-case loss under some regularity conditions. 1

Yiling Chen

2007-01-01T23:59:59.000Z

50

Ceiling Fan and Ceiling Fan Light Kit use in the U.S. Results of a Survey on Amazon Mechanical Turk  

E-Print Network (OSTI)

Intellect, LLC (2011). Ceiling fan consumer survey data fromconsumption from ceiling fans. 5 References Amazon.com. (January/February 2001). Ceiling fans: Fulfilling the energy

Kantner, Colleen L.S.

2013-01-01T23:59:59.000Z

51

Maker Can Construct a Sparse Graph on a Small Board  

E-Print Network (OSTI)

We study Maker/Breaker games on the edges of sparse graphs. Maker and Breaker take turns in claiming previously unclaimed edges of a given graph H. Maker aims to occupy a given target graph G and Breaker tries to prevent Maker from achieving his goal. We define a function f and show that for every d-regular graph G on n vertices there is a graph H with at most f(d)n edges such that Maker can occupy a copy of G in the game on H.

Gebauer, Heidi

2010-01-01T23:59:59.000Z

52

Building Energy Codes Resource Guide for Policy Makers | Building Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Guide for Policy Makers Guide for Policy Makers This guide provides key information to policy makers on energy codes and standards and offers guidance on how policy makers can support the creation of statewide energy efficiency goals and standards. In addition, this guide instructs policy makers on how they can: Encourage the adoption of statewide codes. Establish energy code awareness programs. Support enforcement of and compliance with energy codes. Participate in the development of model codes and standards. Determine the viability of the new code. Publication Date: Friday, June 24, 2011 BECP_Policy_Maker_Resource Guide_June2011_v00_lores.pdf BECP_Policy_Maker_Resource Guide_June2011_v00_hires.pdf Document Details Last Name: Britt Initials: M Affiliation: PNNL Document Number: PNNL-81023

53

Evaluation of the cooling fan efficiency index.  

E-Print Network (OSTI)

between the cooling effect (measured with a thermal manikin)output is the body cooling effect [5]. Thermal manikins withThermal manikins can be used to measure the fan cooling

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

54

Advanced Manufacturing Office: Training: Fan Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

the tool and presents the basics-and the benefits-of using it to target opportunities for energy savings in your plant. Fan System Assessment - self-paced workshop Availability:...

55

Laugh out loud in real life : women's humor and fan identity; Women's humor and fan identity.  

E-Print Network (OSTI)

??The emerging field of fan studies has, until recently, been defined only by the research that has taken place within it. Almost universally, this research… (more)

Klink, Madeline LeNore

2010-01-01T23:59:59.000Z

56

Fanning the Flames of Romance: An Exploration of Fan Fiction and the Romance Novel.  

E-Print Network (OSTI)

??Fan fiction and romance novels constitute two bodies of romantic literature being produced for and by women within dramatically different environments. The purpose of this… (more)

Morrissey, Katherine

57

Fan System Assessment - End User Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fan System Assessment - End User Training Fan System Assessment - End User Training Fan System Assessment - End User Training December 18, 2013 7:30AM to 4:30PM EST Boise, Idaho Optimizing industrial fan systems can take on many forms, but any fan optimization project must meet the needs of the process. This self-paced workshop highlights the benefits of fan system optimization and examines fan system performance characteristics and practical issues concerning measurement data. The session introduces the FSAT software. This powerful analysis software helps you quantify the potential benefits of configuring fan systems for optimal performance, calculate the amount of energy use by your fan system, and estimate fan system efficiency. Learn how the software works, what data is required for FSAT, and how to interpret assessment

58

Cooling with a Whole House Fan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cooling with a Whole House Fan Cooling with a Whole House Fan Cooling with a Whole House Fan May 30, 2012 - 6:54pm Addthis Whole house fan installed as part of a home retrofit project in California. | Photo courtesy of Lieko Earle, NREL. Whole house fan installed as part of a home retrofit project in California. | Photo courtesy of Lieko Earle, NREL. What does this mean for me? A whole-house fan may be sufficient to cool your house, at least for part of the year. In many climates, a whole-house fan can save you money and maintain comfort during the cooling season. How does it work? A whole-house fan works by pulling air in through windows and exhausting it through the attic and roof. Whole house cooling using a whole house fan can substitute for an air conditioner most of the year in most climates. Whole house fans combined

59

Hitting time results for Maker-Breaker games  

E-Print Network (OSTI)

We study Maker-Breaker games played on the edge set of a random graph. Specifically, we analyze the moment a typical random graph process first becomes a Maker’s win in a game in which Maker’s goal is to build a graph which admits some monotone increasing property P. We focus on three natural target properties for Maker’s graph, namely being k-vertex-connected, admitting a perfect matching, and being Hamiltonian. We prove the following optimal hitting time results: with high probability Maker wins the k-vertex connectivity game exactly at the time the random graph process first reaches minimum degree 2k; with high probability Maker wins the perfect matching game exactly at the time the random graph process first reaches minimum degree 2; with high probability Maker wins the Hamiltonicity game exactly at the time the random graph process first reaches minimum degree 4. The latter two statements settle conjectures of Stojakovi? and Szabó. We also prove generalizations of the latter two results; these generalizations partially strengthen some known results in the theory of random graphs. An extended abstract of this paper was previously published in [4]. 1

Sonny Ben-shimon; Asaf Ferber; Dan Hefetz; Michael Krivelevich

2011-01-01T23:59:59.000Z

60

Building Energy Software Tools Directory: BinMaker Pro  

NLE Websites -- All DOE Office Websites (Extended Search)

BinMaker Pro BinMaker Pro BinMaker Pro logo. Creates summaries of U.S. hourly weather data for 239 cities. BinMaker PRO exports the resulting electronic files for use in spreadsheets, or other computer analysis programs. BinMaker PRO provides the following five functions: BIN summaries by dry bulb temperature or by wet bulb temperature, humidity ration or wind speed. It creates accurate summaries by the choice of four primary variables. Mean coincident values for any of the other three variables (plus enthalpy) are also calculated when requested by user. User may also define a specific operating schedule rather than summarizing all 8760 hours of the year. Ventilation Load BIN Summaries. When a user defines a space-neutral temperature and humidity, BinMaker PRO automatically calculates the

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

An Innovative Method for Dynamic Characterization of Fan Filter Unit Operation.  

E-Print Network (OSTI)

Filtration: Fan filter units. Final Report, LawrencePerformance of Fan Filter Units, Version 1.3. ” BerkeleyEfficient Fan filter units,” Proceedings of Semiconductor

Xu, Tengfang

2006-01-01T23:59:59.000Z

62

Uranium-series comminution ages of continental sediments: Case study of a Pleistocene alluvial fan  

E-Print Network (OSTI)

of a stream-dominated alluvial fan, San Joaquin valley,on Quaternary fluvial fans, San Joaquin Basin, California,M. , (Eds), Alluvial Fans: Geomorphology, Sedimentology,

Lee, Victoria E.

2010-01-01T23:59:59.000Z

63

Parametric System Curves: Correlations Between Fan Pressure Rise and Flow for Large Commercial Buildings  

E-Print Network (OSTI)

Filter Pressure Loss Model for Fan Energy Calculation in Air2010. “Selecting Efficient Fans”. ASHRAE Journal, Vol. 52,Equipment: Chapter 20 – Fans”. Atlanta, GA: American Society

Sherman, Max

2010-01-01T23:59:59.000Z

64

An Innovative Method for Dynamic Characterization of Fan Filter Unit Operation.  

E-Print Network (OSTI)

Laboratory Methods of Testing Fans for Rating. ASHRAE. 1987.Efficient Filtration: Fan filter units. Final Report,Energy Performance of Fan Filter Units, Version 1.3. ”

Xu, Tengfang

2006-01-01T23:59:59.000Z

65

Coarse-clastic turbidite sedimentation : the neoproterozoic Imsdalen submarine fan complex, Hedmark Basin, South Norway.  

E-Print Network (OSTI)

??The Imsdalen Submarine Fan Complex is a gravel and coarse sand dominated turbidite fan system. The fan complex was deposited in the Neoproterozoic Hedmark rift… (more)

Stalsberg, Martin

2004-01-01T23:59:59.000Z

66

Fan-less long range alpha detector  

DOE Patents (OSTI)

A fan-less long range alpha detector which operates by using an electrical field between a signal plane and the surface or substance to be monitored for air ions created by collisions with alpha radiation. Without a fan, the detector can operate without the possibility of spreading dust and potential contamination into the atmosphere. A guard plane between the signal plane and the electrically conductive enclosure and maintained at the same voltage as the signal plane, reduces leakage currents. The detector can easily monitor soil, or other solid or liquid surfaces.

MacArthur, Duncan W. (Los Alamos, NM); Bounds, John A. (Los Alamos, NM)

1994-01-01T23:59:59.000Z

67

Fan-less long range alpha detector  

DOE Patents (OSTI)

A fan-less long range alpha detector is disclosed which operates by using an electrical field between a signal plane and the surface or substance to be monitored for air ions created by collisions with alpha radiation. Without a fan, the detector can operate without the possibility of spreading dust and potential contamination into the atmosphere. A guard plane between the signal plane and the electrically conductive enclosure and maintained at the same voltage as the signal plane, reduces leakage currents. The detector can easily monitor soil, or other solid or liquid surfaces. 2 figures.

MacArthur, D.W.; Bounds, J.A.

1994-05-10T23:59:59.000Z

68

Fan blade development. Final report Sep 81-Sep 82  

SciTech Connect

The objective of this program was to develop an improved fan blade that could be utilized in place of the current steel fan blade on the Pedal Ventilator Kit (PVK). The goals of the program were to reduce both the unit cost and weight of the fan while maintaining its effectiveness and reliability. A value analysis study was conducted on the fan blade to determine material/design revisions that offered potential manufacturing economies. Based on the conclusions of the study, two designs were chosen for fabrication. The two fan designs were constructed and tested. As a result of the performance testing, one fan blade emerged as the optimum design. Fifteen fan blades of the optimum design were constructed for FEMA inspection and distribution. Preliminary specifications were generated for the fan blade assembly. in addition, production cost estimates based on a procurement of 100,000 units were formulated for FEMA budgetary purposes.

Buday, J.M.

1982-09-01T23:59:59.000Z

69

Fan Blade Fracture in a Welded Assembly - Programmaster.org  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2013. Symposium, Failure Analysis and Prevention. Presentation Title, Fan Blade Fracture in a ...

70

Laboratory evaluation of fan/filter units' aerodynamic and energy performance  

E-Print Network (OSTI)

such as motor types, fan wheels, design, and orientations ofventilation system design, testing of fans and ventilation

Xu, Tengfang; Jeng, Ming-Shan

2004-01-01T23:59:59.000Z

71

Data Linking with Ontology Alignment Zhengjie Fan  

E-Print Network (OSTI)

Data Linking with Ontology Alignment Zhengjie Fan INRIA & LIG 655, avenue de l'Europe, Montbonnot data on the web, so that users can share information semantically. Then, linking isolated data sets to to be compared, so that it enhances the accuracy of the linking process. I propose a data linking method

72

Lattice congruences, fans and Hopf algebras  

Science Conference Proceedings (OSTI)

We give a unified explanation of the geometric and algebraic properties of two well-known maps, one from permutations to triangulations, and another from permutations to subsets. Furthermore we give a broad generalization of the maps. Specifically for ... Keywords: Malvenuto-Reutenauer Hopf algebra, coexter group, fan poset, hyperplane arrangement, pattern avoidance, permutohedron, poset of regions, weak order

Nathan Reading

2005-05-01T23:59:59.000Z

73

TR-034 Geomorphology March 2006 Coastal fan destabilization  

E-Print Network (OSTI)

the watershed boundary). 3.0 STUDY DESIGN AND METHODS To evaluate fans from a broad range of coastal conditionsTR-034 Geomorphology March 2006 Coastal fan destabilization and forest management by T.H. Millard Columbia V9L 1V2 Citation: Millard, T.H., D.J. Wilford and M.E. Oden. 2006. Coastal fan destabilization

74

Recent Sediments of the Monterey Deep-Sea Fan  

E-Print Network (OSTI)

T Or THE MONTEREV DEEP SEA FAN PLAlE Conpl1.d and ren1our.dO F THE MONTEREY DEEP- SEA FAN by P a t Wilde Berkeley,of segmented alluvial fans in w e s t e r n F r e s n o

Wilde, Pat

1965-01-01T23:59:59.000Z

75

High Efficiency Fans and High Efficiency Electrical Motors  

E-Print Network (OSTI)

Replacing nominal efficient electrical motors with premium efficiency can save on electrical power costs in cotton gins. Connected horsepower load on industrial air fans is approximately 60% of the total horsepower in a typical cotton gin. By replacing old inefficient centrifugal fans with new higher efficiency fans, additional power savings can be achieved.

Breedlove, C. W.

1989-09-01T23:59:59.000Z

76

Characterization of mutagenic activity in grain-based coffee-substitute blends and instant coffees  

SciTech Connect

Several grain-based coffee-substitute blends and instant coffees showed a mutagenic response in the Ames/Salmonella test using TA98, YG1024 and YG1O29 with metabolic activation. The beverage powders contained 150 to 500 TA98 and 1150 to 4050 YG1024 revertant colonies/gram, respectively. The mutagenic activity in the beverage powders was shown to be stable to heat and the products varied in resistance to acid nitrite treatment. Characterization of the mutagenic activity, using HPLC-and the Ames test of the collected fractions, showed the coffee-substitutes and instant coffees contain several mutagenic compounds, which are most likely aromatic amines.

Johansson, M.A.E.; Knize, M.G.; Felton, J.S.; Jagerstad, M.

1994-06-01T23:59:59.000Z

77

List of Ceiling Fan Incentives | Open Energy Information  

Open Energy Info (EERE)

Fan Incentives Fan Incentives Jump to: navigation, search The following contains the list of 99 Ceiling Fan Incentives. CSV (rows 1 - 99) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active AEP Ohio (Electric) - Residential Energy Efficiency Rebate Program (Ohio) Utility Rebate Program Ohio Residential Building Insulation Ceiling Fan Central Air conditioners Custom/Others pending approval Duct/Air sealing Heat pumps Lighting Motors Programmable Thermostats Windows Yes AEP Ohio (Gas) - Residential Energy Efficiency Rebate Program (Ohio) Utility Rebate Program Ohio Residential Building Insulation Ceiling Fan Central Air conditioners Custom/Others pending approval Dehumidifiers Duct/Air sealing Heat pumps Lighting Motors Programmable Thermostats

78

List of Whole House Fans Incentives | Open Energy Information  

Open Energy Info (EERE)

Whole House Fans Incentives Whole House Fans Incentives Jump to: navigation, search The following contains the list of 26 Whole House Fans Incentives. CSV (rows 1 - 26) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active Alliant Energy Interstate Power and Light (Gas and Electric) - Farm Equipment Energy Efficiency Incentives (Iowa) Utility Rebate Program Iowa Agricultural Agricultural Equipment Ceiling Fan Clothes Washers Custom/Others pending approval Dishwasher Doors Heat recovery Lighting Motor VFDs Motors Refrigerators Water Heaters Windows Whole House Fans Room Air Conditioners Ground Source Heat Pumps Yes Alliant Energy Interstate Power and Light - Farm Equipment Energy Efficiency Incentives (Minnesota) Utility Rebate Program Minnesota Agricultural Agricultural Equipment

79

Sustainable Bioenergy: A Framework for Decision Makers | Open Energy  

Open Energy Info (EERE)

Sustainable Bioenergy: A Framework for Decision Makers Sustainable Bioenergy: A Framework for Decision Makers Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Sustainable Bioenergy: A Framework for Decision Makers Agency/Company /Organization: Food and Agriculture Organization of the United Nations Sector: Energy, Land Focus Area: Renewable Energy, Biomass Topics: Implementation, Policies/deployment programs Resource Type: Guide/manual, Lessons learned/best practices Website: esa.un.org/un-energy/pdf/susdev.Biofuels.FAO.pdf References: Sustainable Bioenergy: A Framework for Decision Makers[1] "In this publication, UN-Energy seeks to structure an approach to the current discussion on bioenergy, it is the contribution of the UN system to the issues that need further attention, analysis and valuation, so that

80

'Balancing market maker' proposal for France poses several Key questions  

SciTech Connect

Officials responsible for cross-border trade and balancing market issues raise questions about a 'balancing market maker' proposal. Data are presented on imbalance prices for 24 European countries.

Gence-Creux, Christophe; Bonnesoeur, Nicolas; Mocco, Marielle; Papillon, Benjamin [Grid Access Directorate, Cross-Border Power Trade Department, CRE (France)

2007-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Microsoft Word - 11_4_09 ice maker.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

docket. In summary, the issues discussed during the call were an update on including ice maker energy into the refrigerator-freezer test procedure and questions on the status...

82

Demonstration of Intelligent Control and Fan Improvements in Computer Room  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Intelligent Control and Fan Improvements in Computer Room Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Title Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Publication Type Report Refereed Designation Unknown LBNL Report Number LBNL-6007E Year of Publication 2012 Authors Coles, Henry C., Steve E. Greenberg, and Corrine Vita Document Number LBNL-6007E Date Published 12/2012 Publisher Lawrence Berkeley National Laboratory City Berkeley, CA Keywords air distribution, building technology and urban systems department, computer room air handler, crah control, data center, data center crah, ec fan, ecm, ecm fan, fan speed control, high tech and industrial systems group, plug fan, variable frequency drive, vfd, wireless control Abstract

83

Analysing International Sports Fan Motivations and Constraints: The Case of Japanese International Sports Fan Tourists and Rugby World Cup Fan Tourists.  

E-Print Network (OSTI)

??The scale of professional sports leagues and mega sports events has expanded recently. Many sports fans travel to foreign countries to watch international events featuring… (more)

Nishio, Tatsuru

2013-01-01T23:59:59.000Z

84

Performance Assessment of Photovoltaic Attic Ventilator Fans  

E-Print Network (OSTI)

Controlling summer attic heat gain is important to reducing air conditioning energy use in homes in hot-humid climates. Both heat transfer through ceilings and t attic duct systems can make up a large part of peak cooling demand, Attic ventilation has long been identified as a method to abate such heat gains. We present test results from using the photovoltaic (PV) attic ventilator fans in a test home to assess impact on attic and cooling energy performance.

Parker, D. S.; Sherwin, J. R.

2000-01-01T23:59:59.000Z

85

HVAC Fans and Dampers Maintenance Guide  

Science Conference Proceedings (OSTI)

Heating, ventilation, and air conditioning (HVAC) systems serve an important function in nuclear power plants because these systems are responsible for maintaining many environmental conditions throughout the facility. Failure of these components can induce undesirable radiological conditions and stressful working conditions, and can compromise the life of qualified equipment. Some HVAC fan and damper failures are preventable by monitoring operating parameters and performing recommended maintenance activ...

1999-08-26T23:59:59.000Z

86

Nonlinear fan instability of electromagnetic waves  

Science Conference Proceedings (OSTI)

This paper studies the linear and nonlinear stages of the fan instability, considering electromagnetic waves of the whistler frequency range interacting resonantly with energetic electron fluxes in magnetized plasmas. The main attention is paid to determine the wave-particle interaction processes that can lead to the excitation of intense electromagnetic waves by nonequilibrium particle distributions involving suprathermal tails, and to explain under what conditions and through what mechanisms they can occur, develop, and saturate. This paper presents and discusses two main processes: (i) the linear fan instability and (ii) the nonlinear process of dynamical resonance merging, which can significantly amplify the energy carried by linearly destabilized waves after they saturate due to particle trapping. This study consists of (i) determining analytically and numerically, for parameters typical of space and laboratory plasmas, the linear growth rates of whistlers excited by suprathermal particle fluxes through the fan instability, as well as the corresponding thresholds and the physical conditions at which the instability can appear, (ii) building a theoretical self-consistent 3D model and a related numerical code for describing the nonlinear evolution of the wave-particle system, and (iii) performing numerical simulations to reveal and characterize the nonlinear amplification process at work, its conditions of development, and its consequences, notably in terms of electromagnetic wave radiation. The simulations show that when the waves have reached sufficient energy levels owing to the linear fan instability, they saturate by trapping particles and due to the complex dynamics of these particles in the electromagnetic fields, the resonant velocities' domains of the waves overlap and merge, meanwhile a strong increase of the wave energy occurs.

Krafft, C. [Laboratoire de Physique des Plasmas, Ecole Polytechnique, 91128 Palaiseau Cedex (France) and University Paris Sud, 91405 Orsay Cedex (France); Volokitin, A. [Space Research Institute (IKI), 117997, 84/32 Profsoyuznaya Str., Moscow (Russian Federation)

2010-10-15T23:59:59.000Z

87

Mass and fans in attached sunspaces  

DOE Green Energy (OSTI)

The effect of thermal storage mass on the performance of an attached sunspace is investigated for a particular design in Boston. Mass in the sunspace and in the adjoining building are compared. Performance is evaluated in terms of temperature conditions in the sunspace and delivery of useful solar heat to the adjoining building. The dependence of the results on the manner of heat delivery is studied. Both natural convection and fan-forced air flow are included.

Jones, R.W.; McFarland, R.D.; Lazarus, G.S.

1982-01-01T23:59:59.000Z

88

Coffee  

NLE Websites -- All DOE Office Websites (Extended Search)

pounds or approximately 500 cups per person per year -- about half of the world's total crop. The Boston Tea Party which touched off the Revolutionary War caused our rebellious...

89

Use of fan rig data for the understanding and prediction of fan broadband noise and noise changes due to a variable area nozzle.  

E-Print Network (OSTI)

??This thesis presents the results of the research component of this EngD, entitled Use of fan rig data for the understanding and prediction of fan… (more)

Deane, Eugene Pio

2009-01-01T23:59:59.000Z

90

Global Solar Opportunity Tool: A Tool for Policy Makers and Energy...  

Open Energy Info (EERE)

Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Jump to: navigation, search Name Global Solar Opportunity Tool: A Tool for Policy Makers and Energy...

91

Fair Trade in the fields : outcomes for Peruvian coffee products  

E-Print Network (OSTI)

Accessing specialty coffee markets is recognized as a way for some small-scale coffee farmers to earn higher prices, counteract unequal distributions of market power, and achieve a better quality of life. Members of CEPICAFE, ...

Walsh, Jean Marie, 1969-

2004-01-01T23:59:59.000Z

92

An Aerodynamic Design Technique For Optimizing Fan Blade Spacing  

E-Print Network (OSTI)

INTRODUCTION Aerodynamic shape optimization involves designing the most efficient shapes of bodies that move through fluids. An optimization algorithm perturbs the shape of an airfoil until it finds the shape which best exhibits a given design objective. For an inverse design technique, this objective is a prescribed aerodynamic distribution, usually the surface pressure distribution. Liebeck pressure distributions [1], for example, have been demonstrated to generate airfoils with high lift to drag ratios. When designing fans, consideration must be given not only to the shape of the fan blades, but also to the distance separating the fan blades. This spacing is defined by the pitch/chord ratio t/l, where the pitch, t, is the distance between fan blades, and the chord, l, is the length of each fan blade. In this work, an inverse algorithm is developed, then used to design fan blade shapes and to find the optimal blade spacing.

T. Rogalsky; R.W. Derksen; Rt N; Rt N; S. Kocabiyik

1999-01-01T23:59:59.000Z

93

NREL: Energy Analysis - Energy Data for Decision Makers  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Data for Decision Makers Energy Data for Decision Makers The National Renewable Energy Laboratory (NREL) is home to a wealth of data and tools that can be linked together to derive knowledge and expand decision-making capabilities. Our platform links energy communities and decision makers such as policymakers, researchers, technology investors, venture capitalists, and market professionals - with valuable energy data, information, analyses, tools, images, maps, and other resources. Cover of the Renewable Energy Data Book. Cover of the Renewable Energy Data Book. Cover of the Power Technologies Energy Data Book. Cover of the Renewable Energy Data Book. A map visually representing state and congressional funding in the U.S by state. A screenshot of the 20% Wind Energy 2030 website.

94

Marble Maker Slashes Energy Use | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marble Maker Slashes Energy Use Marble Maker Slashes Energy Use Marble Maker Slashes Energy Use April 9, 2010 - 3:04pm Addthis King is saving 11.8 percent a year on energy costs due to upgrades at its Paden City, W.Va., plant. | Photo Courtesy of Marble King King is saving 11.8 percent a year on energy costs due to upgrades at its Paden City, W.Va., plant. | Photo Courtesy of Marble King Paul Lester Communications Specialist, Office of Energy Efficiency and Renewable Energy It takes a lot of power to produce 1 million marbles a day. But with the help of employees who unplugged mobile phone chargers, switched off computers and trimmed the time it took to heat up lunches in the microwave, Marble King slashed its energy use, winning the Energy Department's Save Energy Now award. The employees were "tickled to death" by the win, says Marble King's

95

DOE Subpoenas Maker of Super Power Showerhead | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subpoenas Maker of Super Power Showerhead Subpoenas Maker of Super Power Showerhead DOE Subpoenas Maker of Super Power Showerhead January 13, 2011 - 5:56pm Addthis Yesterday, the Department of Energy's Office of Enforcement issued a subpoena to Richard Graham of Long Beach, California seeking water efficiency information and sales records for the "Super Power Shower" in response to a complaint that it violates federal water conservation standards. The Super Power Shower is sold by Mr. Graham on www.gambling-systems.com and other websites, which declare that the showerhead uses 10 gallons of water per minute - four times the 2.5 gallon per minute maximum set by Congress in 1992. This action reflects the Department's commitment to enforce DOE's efficiency standards to ensure that all manufacturers play by the same rules and that consumers realize

96

DOE Subpoenas Maker of Super Power Showerhead | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subpoenas Maker of Super Power Showerhead Subpoenas Maker of Super Power Showerhead DOE Subpoenas Maker of Super Power Showerhead January 13, 2011 - 5:56pm Addthis Yesterday, the Department of Energy's Office of Enforcement issued a subpoena to Richard Graham of Long Beach, California seeking water efficiency information and sales records for the "Super Power Shower" in response to a complaint that it violates federal water conservation standards. The Super Power Shower is sold by Mr. Graham on www.gambling-systems.com and other websites, which declare that the showerhead uses 10 gallons of water per minute - four times the 2.5 gallon per minute maximum set by Congress in 1992. This action reflects the Department's commitment to enforce DOE's efficiency standards to ensure that all manufacturers play by the same rules and that consumers realize

97

Development of In-Situ Fan Curve Measurement with One Airflow Measurement  

E-Print Network (OSTI)

Fan airflow is the key parameter for air volume tracking control in variable air volume systems. One of the airflow measurement methods is to determine airflow using the fan speed, fan head, and fan curve. Both fan speed and fan head can be measured accurately. Therefore, the accuracy of the fan airflow depends on the accuracy of the fan curve. An experimental method has been developed to determine the in-situ fan curve with only one airflow measurement. This paper presents the theoretical background, experimental procedures, and verification results.

Liu, G.; Joo, I. S.; Song, L.; Liu, M.

2003-01-01T23:59:59.000Z

98

Active control of fan noise and vortex shedding.  

E-Print Network (OSTI)

??[Truncated abstract] The subject of fan noise generating mechanisms and its control has been studied intensively over the past few decades as a result of… (more)

Wong, Yee-Jun

2004-01-01T23:59:59.000Z

99

Optimization of Active Noise Control for Small Axial Cooling Fans.  

E-Print Network (OSTI)

??Previous work has shown that active noise control is a feasible solution to attenuate tonal noise radiated by small axial cooling fans, such as those… (more)

Monson, Brian B 1979-

2006-01-01T23:59:59.000Z

100

Characteristics of Residential Housing Units by Ceiling Fans, 2001  

U.S. Energy Information Administration (EIA)

A reporting of the number of housing units using ceiling fans in U.S. households as reported in the 2001 Residential Energy Consumption Survey

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Supply Fan Control for Constant Air Volume Air Handling Units  

E-Print Network (OSTI)

Since terminal boxes do not have a modulation damper in constant volume (CV) air handling unit (AHU) systems, zone reheat coils have to be modulated to maintain the space temperature with constant supply airflow. This conventional control sequence causes a significant amount of reheat and constant fan power under partial load conditions. Variable Frequency Drives (VFDs) can be installed on these constant air volume systems. The fan speed can be modulated based on the maximum zone load. This paper present the procedure to control the supply fan speed and analyzes the thermal performance and major fan energy and thermal energy savings without expensive VAV retrofit through the actual system operation.

Cho, Y.; Wang, G.; Liu, M.

2007-01-01T23:59:59.000Z

102

Water-side Economizer for Non-Fan Cooling Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

changes to the commercial provisions of the 2012 IECC: Water-side Economizer for Non-Fan Cooling Systems R Hart Pacific Northwest National Laboratory January 2013 Proposal...

103

Table 1. Household Characteristics by Ceiling Fans, 2001  

U.S. Energy Information Administration (EIA)

A reporting of the number of housing units using ceiling fans in U.S. households as reported in the 2001 Residential Energy Consumption Survey

104

Effect of baselevel change on floodplain and fan sediment storage and ephemeral tributary channel morphology, Navarro River, California  

E-Print Network (OSTI)

CHANGE ON FLOODPLAIN AND FAN SEDIMENT STORAGE AND EPHEMERALaffects floodplain and fan sediment storage and smalllowered baselevel on floodplain and fan sediment storage and

Florsheim, Joan L; Mount, Jeffrey F.; Rutten, Luke T.

2000-01-01T23:59:59.000Z

105

Field Study of Exhaust Fans for Mitigating Indoor Air Quality Problems: Final Report to Bonneville Power Administration  

E-Print Network (OSTI)

Using Mechanical Ventilation Exhaust Fans Air-to-Air Heatexpected from exhaust fan A-I Infiltration contribution toIndoor Air Quality -- Exhaust Fan Mitigation" Final Report

Grimsrud, David T.

2009-01-01T23:59:59.000Z

106

Stratigraphic evolution and characteristics of lobes : a high-resolution study of Fan 3, Tanqua Karoo, South Africa.  

E-Print Network (OSTI)

??Fan 3 is one of four basin-floor fans that form part of the Tanqua Karoo Fan Complex in South Africa. It can be subdivided into… (more)

Neethling, J. M.

2009-01-01T23:59:59.000Z

107

Cooling Tower Fan Motor Power Optimization Study  

Science Conference Proceedings (OSTI)

Cooling towers are in use at more than 200 major electric generating plants in the United States, representing approximately 800 units and a total of more than 210,000 MW. The auxiliary power consumed by cooling tower fan motors can significantly reduce the net power output of steam-cycle power plants. Cooling tower specifications are established by the economic and operational requirements of maximum unit load and the most demanding environmental conditions expected in the tower’s locale. Since power pl...

2011-11-16T23:59:59.000Z

108

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers Edited by Joan Ogden and Lorraine Anderson #12;Institute of Transportation Studies University of California, Davis One TRANSPORTATION ENERGY PATHWAYS CHAPTER 8: SCENARIOS FOR DEEP REDUCTIONS IN GREENHOUSE GAS EMISSIONS PART 3

California at Davis, University of

109

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers Edited by Joan Ogden and Lorraine Anderson #12;Institute of Transportation Studies University of California, Davis One TRANSPORTATION ENERGY PATHWAYS PART 3: SCENARIOS FOR A LOW-CARBON TRANSPORTATION FUTURE PART 3 Part 3: Scenarios

California at Davis, University of

110

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers Edited by Joan Ogden and Lorraine Anderson #12;Institute of Transportation Studies University of California, Davis One TRANSPORTATION ENERGY PATHWAYS PART 3 CHAPTER 10: OPTIMIZING THE TRANSPORTATION CLIMATE MITIGATION WEDGE Chapter

California at Davis, University of

111

Standard Methods of Characterizing Performance of Fan Filter Units, Version 3.0  

E-Print Network (OSTI)

power input to operate the FFU at certain airflow conditions, including fan motor, controller, and transformerpower supply to the fan motor, speed control and display device, transformer,power demand shall include fan motor, speed control and display device, transformer,

Xu, Tengfang

2007-01-01T23:59:59.000Z

112

An Innovative Method for Dynamic Characterization of Fan Filter Unit Operation.  

E-Print Network (OSTI)

power for fan motor, controller, and accessories such as transformerpower demand shall include fan motor, speed control and display device, transformer,power demand shall include the fan, frequency drive motor, speed control device, transformer

Xu, Tengfang

2006-01-01T23:59:59.000Z

113

An Innovative Method for Dynamic Characterization of Fan Filter Unit Operation.  

E-Print Network (OSTI)

that is affected by fan-wheel design, air-path and size,by- 4-ft) fan filter units with various design, operation,differential – the design and control schemes of fan filter

Xu, Tengfang

2006-01-01T23:59:59.000Z

114

Development of a Fan-Filter Unit Test Standard, Laboratory Validations, and its Applications across Industries  

E-Print Network (OSTI)

Energy Performance of Fan-Filter Units, Version 1.3 (2005).Energy Performance of Fan-Filter Units, Version 2.0 (2006).Evaluation of Fan-filter Units’ Aerodynamic and Energy

Xu, Tengfang

2008-01-01T23:59:59.000Z

115

Toward green systems for cleanrooms: Energy efficient fan-filter units  

E-Print Network (OSTI)

M. and F. Tsau. 2002. Fan-Filter Unit (FFU) Test Procedures.Laboratory Methods of Testing Fans for Rating, Air MovementTest Procedure For Fan-Filter Units (not published). [6] Xu,

Jeng, Ming-Shan; Xu, Tengfang; Lan, Chao-Ho

2004-01-01T23:59:59.000Z

116

Development of a Fan-Filter Unit Test Standard, Laboratory Validations, and its Applications across Industries  

E-Print Network (OSTI)

Energy Performance of Fan-Filter Units, Version 1.3 (2005).Energy Performance of Fan-Filter Units, Version 2.0 (2006).Laboratory Evaluation of Fan-filter Units’ Aerodynamic and

Xu, Tengfang

2008-01-01T23:59:59.000Z

117

Laboratory evaluation of fan/filter units' aerodynamic and energy performance  

E-Print Network (OSTI)

Jeng, M.S. , F. Tsau. 2002. Fan-Filter Unit (FFU) TestLaboratory Methods of Testing Fans for Rating, Air MovementTest Procedure For Fan-Filter Units (not published). Xu,

Xu, Tengfang; Jeng, Ming-Shan

2004-01-01T23:59:59.000Z

118

Standard Methods of Characterizing Performance of Fan Filter Units, Version 3.0  

E-Print Network (OSTI)

Efficient Filtration: Fan-filter Units. Final Report,Xu. 2007. “The Development of Fan Filter Unit with Flow Rate2007. “Performance of Large Fan Filter Units for Cleanroom

Xu, Tengfang

2007-01-01T23:59:59.000Z

119

“Starring” Madhuri as Durga: The Madhuri Dixit Temple and Performative Fan-Bhakti of Pappu Sardar  

E-Print Network (OSTI)

Devotion and Defiance in Fan Activity. ” In Ravi Vasudevan,Temple and Performative Fan-Bhakti of Pappu Sardar / 415Temple and Performative Fan-Bhakti of Pappu Sardar Shalini

Kakar, Shalini

2009-01-01T23:59:59.000Z

120

Fan System Effects: How Fan Ductwork Design Impacts Overall System Efficiency and What the Approach Should be for Optimization  

E-Print Network (OSTI)

"In order to establish the aerodynamic performance characteristics of a custom fan or even a line of fans, the accepted practice of the industry is to carry out testing on a scale model in a laboratory to develop its fan performance curve. Then by applying affinity laws in conjunction with very specific rules that address scaling issues, the performance characteristics of geometrically similar fans can be predicted. These affinity laws (frequently referred to as fan laws) also allow the performance of fans operating at different speeds or handling gases at different density values to be accurately predicted. However, it is often found that even fans with well defined and pedigreed performance curves are unable to meet their performance expectations once they are installed on the systems for which they have been sold. This is primarily due to the adverse aerodynamic impact of the inlet or outlet connections on the performance capacity of the fan and thus on the overall system efficiency. The general term for design conditions at inlets or outlets of fans that cause deficient aerodynamic performance is ‘system effects’. The characteristics of fan system effects are that they reduce fan capacity and are both velocity and geometry dependent. On the inlet side of a fan, this generally characterizes itself by a flow pattern that is highly non?uniform. On the discharge side, the high and low velocity flow streams leaving the fan may simply be prevented from redeveloping a uniform flow profile and normal static pressure conversion before encountering a disturbance. The term can also apply to system elements such as silencers, elbows and transitions. For these components, the actual pressure drop across them may be significantly higher than their calculated or rated values if the velocity profile of the entering flow is skewed or non?uniform. For either case (fan connection or system component), the result is that additional power will be required to address the flow rate required by the system. In many instances, system designers are simply unfamiliar with the importance of understanding system effects as it pertains to new fan selections and the attendant power requirements. At a minimum, a reasonable approach for new fan projects should be to establish the theoretical system effect of connection designs by using a recognized document such as Air Movement and Control Association Publication 201. The objective should be to first minimize their impact through appropriate connection design modifications in conjunction with potential fan inlet and outlet re?orientation. Once the system effects are minimized, the residual value should be applied to the fan performance specification in order to ensure that the fan is selected for the required aerodynamic capacity. For system components, an approach that has proved to be of significant value is to predict the flow pattern using computation fluid dynamics (CFD) modelling tools and in this process, the design can be tweaked until the designer finds the overall pressure drops of a system are minimized to the greatest practical extent. Similarly, CFD can be used to predict the flow profile at a fan inlet to ensure that it is as uniform as practically possible. This paper reviews the concept of system effects from the perspective of fan power requirements and provides a methodology for approaching system design from the perspective of optimizing fan energy use while achieving the required system capacity."

Martin, V.

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Fan-speed-aware scheduling of data intensive jobs  

Science Conference Proceedings (OSTI)

As server processor power densities increase, the cost of air cooling also grows resulting from higher fan speeds. Our measurements show that vibrations induced by fans in high-end servers and its rack neighbors cause a dramatic drop in hard disk bandwidth, ... Keywords: cooling, disk i/o, energy, thermal, vibration

Christine S. Chan; Yanqin Jin; Yen-Kuan Wu; Kenny Gross; Kalyan Vaidyanathan; Tajana `imuni Rosing

2012-07-01T23:59:59.000Z

122

Choosing the right boiler air fans at Weston 4  

SciTech Connect

When it came to choosing the three 'big' boiler air fans - forced draft, induced draft and primary air, the decision revolved around efficiency. The decision making process for fan selection for the Western 4 supercritical coal-fired plant is described in this article. 3 photos.

Spring, N.

2009-04-15T23:59:59.000Z

123

Control system for heat exchangers fans in a refrigeration system  

Science Conference Proceedings (OSTI)

The paper presents a method for controlling evaporator and condenser fans in a refrigeration system. The refrigeration system includes a refrigerant circuit defined by a compressor, a condenser, a throttling device, and an evaporator. The system includes ... Keywords: controlling, fan, refrigeration system, variable frequency drive unit

Cristian Iosifescu; Valeriu Damian; C?lin Ciufudean

2010-05-01T23:59:59.000Z

124

Design and Specification Guidelines for Large Draft Fans and Systems  

Science Conference Proceedings (OSTI)

Design shortcomings in draft fans and related air-gas systems can cause fan failure and costly outages of large fossil fuel power plants. These guidelines will help engineers and manufacturers achieve a better understanding of the design features needed to minimize such failures.

1983-12-01T23:59:59.000Z

125

Condition Monitoring of Fans With Rolling Element Bearings  

Science Conference Proceedings (OSTI)

Data on high-frequency vibration caused by the impacts of bearing pits and spalls can help utilities schedule equipment maintenance. One data collection technique, developed through long-term monitoring of combustion air axial fans at the Pennsylvania Electric Company Homer City station, helps plant personnel anticipate failures of draft fan antifriction bearings by several months.

1988-03-22T23:59:59.000Z

126

Fan Foundation Systems--Analysis and Design Guidelines  

Science Conference Proceedings (OSTI)

Dynamic analysis is the most effective tool for determining the root causes of excessive fan vibration. This study demonstrated the importance of using such analysis in conjunction with a "total systems" approach that considers how the properties of all major fan system components, including foundation, piles, and soil conditions, contribute to vibration.

1986-08-19T23:59:59.000Z

127

Costs and benefits of energy efficiency improvements in ceiling fans  

SciTech Connect

Ceiling fans contribute significantly to residential electricity consumption, especially in developing countries with warm climates. The paper provides analysis of costs and benefits of several options to improve the efficiency of ceiling fans to assess the global potential for electricity savings and green house gas (GHG) emission reductions. Ceiling fan efficiency can be cost-effectively improved by at least 50% using commercially available technology. If these efficiency improvements are implemented in all ceiling fans sold by 2020, 70 terawatt hours per year could be saved and 25 million metric tons of carbon dioxide equivalent (CO2-e) emissions per year could be avoided, globally. We assess how policies and programs such as standards, labels, and financial incentives can be used to accelerate the adoption of efficient ceiling fans in order to realize potential savings.

Shah, Nihar; Sathaye, Nakul; Phadke, Amol; Letschert, Virginie [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technology Division] [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technology Division

2013-10-15T23:59:59.000Z

128

Method for fabricating fan-fold shielded electrical leads  

DOE Patents (OSTI)

Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate.

Rohatgi, Rajeev R. (Mountain View, CA); Cowan, Thomas E. (Livermore, CA)

1994-01-01T23:59:59.000Z

129

Method for fabricating fan-fold shielded electrical leads  

DOE Patents (OSTI)

Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figures.

Rohatgi, R.R.; Cowan, T.E.

1994-12-27T23:59:59.000Z

130

Feedback Applications in Active Noise Control for Small Axial Cooling Fans.  

E-Print Network (OSTI)

??Feedback active noise control (ANC) has been applied as a means of attenuating broadband noise from a small axial cooling fan. Such fans are used… (more)

Green, Matthew J 1978-

2006-01-01T23:59:59.000Z

131

The effect of fan and heat sink design on heat removal from microprocessor chips.  

E-Print Network (OSTI)

??Air flow and heat removal characteristics for fan/heat sink designs used to cool Pentium class processors were analyzed. Five designs were tested for fan speed,… (more)

Baltrip, Kedra G

2012-01-01T23:59:59.000Z

132

Aerodynamic Experiments on a Ducted Fan in Hover and Edgewise Flight.  

E-Print Network (OSTI)

??Ducted fans and ducted rotors have been integrated into a wide range of aerospace vehicles, including manned and unmanned systems. Ducted fans offer many potential… (more)

Myers, Leighton

2009-01-01T23:59:59.000Z

133

Exact solutions to combinatorial optimizations and the traveling baseball fan problem.  

E-Print Network (OSTI)

?? The traveling baseball fan problem is an extension of the classic traveling salesman problem, in which a sports fan wishes to travel to the… (more)

Terrell, Neal D.

2013-01-01T23:59:59.000Z

134

Il fenomeno dei fan nel mercato della musica. Analisi netnografica dei seguaci italiani di Bruce Springsteen.  

E-Print Network (OSTI)

??Lo studio ha ad oggetto la comunità dei fan italiani di Bruce Springsteen. Dopo aver analizzato la letteratura e descritto il fenomeno dei fan e… (more)

Gallo, Sara

2007-01-01T23:59:59.000Z

135

Review: The Dragon & The Elephant: Agricultural and Rural Reforms in China and India edited by Ashok Gulati and Shenggen Fan  

E-Print Network (OSTI)

Ashok Gulati and Shenggen Fan (Eds. ) Reviewed by VarinderIndia Gulati, Ashok and Fan, Shenggen (Eds. ). The Dragon &

Jain, Varinder

2008-01-01T23:59:59.000Z

136

Submitting Organization Hongyou Fan Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

 2007 R&D 100 Award Entry Form  Submitting Organization Hongyou Fan Sandia National Laboratories Advanced Materials Laboratory 1001 University Boulevard SE Albuquerque, NM 87106, USA 505-272-7128 (phone) 505-272-7336 (fax) hfan@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate represen- tation of this product. Submitter's signature_______________________________ Earl Stromberg Lockheed Martin Aeronautics Mail Zone 2893 PO Box 748 Fort Worth, TX 76101, USA 817-763-7376 (phone) 817-762-6911 (fax) Earl.W.Stromberg@lmco.com Self-Assembling Process for Fabricating Tailored Thin Films This simple, economical nanotechnology coating process enables the development of nanoparticle thin films

137

The Fan Observatory Bench Optical Spectrograph (FOBOS)  

E-Print Network (OSTI)

The Fan Observatory Bench Optical Spectrograph (FOBOS) is intended for single-object optical spectroscopy at moderate resolution (R~1500-3000) using a fiber-fed, bench-mounted design to maintain stability. Whenever possible, the instrument uses off-the-shelf components to maintain a modest cost. FOBOS supports Galactic astronomy projects that require consistently well-measured (~5 km/sec) radial velocities for large numbers of broadly distributed and relatively bright (Vdesign was optimized for use in the range 470-670 nm. Test data indicate that the instrument is stable and capable of measuring radial velocities with precision better than 3 km/sec at a resolution of R~1500 with minimal calibration overhead.

Jeffrey D. Crane; Steven R. Majewski; Richard J. Patterson; Michael F. Skrutskie; Elena Y. Adams; Peter M. Frinchaboy

2005-02-23T23:59:59.000Z

138

Policy Makers' Guidebook for Geothermal Heating and Cooling | Open Energy  

Open Energy Info (EERE)

Policy Makers' Guidebook for Geothermal Heating and Cooling Policy Makers' Guidebook for Geothermal Heating and Cooling Jump to: navigation, search Tool Summary Name: Policy Makers' Guidebook for Geothermal Heating and Cooling Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy, Land Focus Area: Renewable Energy, Geothermal, People and Policy Phase: Create a Vision, Evaluate Options, Develop Goals, Develop Finance and Implement Projects Resource Type: Guide/manual, Case studies/examples, Templates, Technical report User Interface: Website Website: www.nrel.gov/geothermal/publications.html Country: United States Cost: Free Northern America Coordinates: 37.09024°, -95.712891° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.09024,"lon":-95.712891,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

139

Policy Makers' Guidebook for Geothermal Electricity Generation | Open  

Open Energy Info (EERE)

Policy Makers' Guidebook for Geothermal Electricity Generation Policy Makers' Guidebook for Geothermal Electricity Generation Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Policy Makers' Guidebook for Geothermal Electricity Generation Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy, Land Focus Area: Renewable Energy, Geothermal, People and Policy Phase: Create a Vision, Evaluate Options, Develop Goals, Develop Finance and Implement Projects Resource Type: Guide/manual, Case studies/examples, Templates, Technical report User Interface: Website Website: www.nrel.gov/geothermal/publications.html Country: United States Cost: Free Northern America Coordinates: 37.09024°, -95.712891° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.09024,"lon":-95.712891,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

140

Global Maker-Breaker games on sparse graphs  

E-Print Network (OSTI)

In this paper we consider Maker-Breaker games, played on the edges of sparse graphs. For a given graph property P we seek a graph (board of the game) with the smallest number of edges on which Maker can build a subgraph that satisfies P. In this paper we focus on global properties. We prove the following results: 1) for the positive minimum degree game, there is a winning board with n vertices and about 10n/7 edges, on the other hand, at least 11n/8 edges are required; 2) for the spanning k-connectivity game, there is a winning board with n vertices and (1+ok(1))kn edges; 3) for the Hamiltonicity game, there is a winning board of constant average degree; 4) for a tree T on n vertices of bounded maximum degree ?, there is a graph G on n vertices and at most f(?) · n edges, on which Maker can construct a copy of T. We also discuss biased versions on these games and argue that the picture changes quite drastically there. 1

Dan Hefetz; Michael Krivelevich; Tibor Szabó

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Particle trajectories and acceleration during 3D fan reconnection  

E-Print Network (OSTI)

Context. The primary energy release in solar flares is almost certainly due to magnetic reconnection, making this a strong candidate as a mechanism for particle acceleration. While particle acceleration in 2D geometries has been widely studied, investigations in 3D are a recent development. Two main classes of reconnection regimes at a 3D magnetic null point have been identified: fan and spine reconnection Aims. Here we investigate particle trajectories and acceleration during reconnection at a 3D null point, using a test particle numerical code, and compare the efficiency of the fan and spine regimes in generating an energetic particle population. Methods. We calculated the time evolution of the energy spectra. We discuss the geometry of particle escape from the two configurations and characterise the trapped and escaped populations. Results. We find that fan reconnection is less efficent than spine reconnection in providing seed particles to the region of strong electric field where acceleration is possible. The establishment of a steady-state spectrum requires approximately double the time in fan reconnection. The steady-state energy spectrum at intermediate energies (protons 1 keV to 0.1 MeV) is comparable in the fan and spine regimes. While in spine reconnection particle escape takes place in two symmetric jets along the spine, in fan reconnection no jets are produced and particles escape in the fan plane, in a ribbon-like structure.

S. Dalla; P. K. Browning

2008-11-07T23:59:59.000Z

142

Environmental and social responsibility in the coffee industry : a case for Oaxaca, Mexico  

E-Print Network (OSTI)

Responsibility in the Coffee Industry: A Case for Oaxaca,Responsibility in the Coffee Industry: A Case for Oaxaca,global cooperation in the coffee industry and encouraged the

Rimburg, Natalya

2012-01-01T23:59:59.000Z

143

Property:Building/SPElectrtyUsePercCirculationFans | Open Energy  

Open Energy Info (EERE)

SPElectrtyUsePercCirculationFans SPElectrtyUsePercCirculationFans Jump to: navigation, search This is a property of type String. Circulation fans Pages using the property "Building/SPElectrtyUsePercCirculationFans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 18.6715328229 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 3.84924044288 + Sweden Building 05K0004 + 13.5679722118 + Sweden Building 05K0005 + 10.115947775 + Sweden Building 05K0006 + 10.4348038368 + Sweden Building 05K0007 + 3.09034005771 + Sweden Building 05K0008 + 1.5024342653 + Sweden Building 05K0009 + 13.4365662073 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 2.75323793817 + Sweden Building 05K0012 + 15.8993705073 + Sweden Building 05K0013 + 1.11354848212 +

144

Property:Building/SPElectrtyUsePercFans | Open Energy Information  

Open Energy Info (EERE)

SPElectrtyUsePercFans SPElectrtyUsePercFans Jump to: navigation, search This is a property of type String. Fans Pages using the property "Building/SPElectrtyUsePercFans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 7.29539104961 + Sweden Building 05K0002 + 16.7673965927 + Sweden Building 05K0003 + 27.9131959869 + Sweden Building 05K0004 + 12.2479817873 + Sweden Building 05K0005 + 29.1925346224 + Sweden Building 05K0006 + 15.8653423601 + Sweden Building 05K0007 + 12.809449974 + Sweden Building 05K0008 + 22.2979541594 + Sweden Building 05K0009 + 22.7088540206 + Sweden Building 05K0010 + 13.3738132017 + Sweden Building 05K0011 + 25.1040933765 + Sweden Building 05K0012 + 22.6542018423 + Sweden Building 05K0013 + 24.3166483485 +

145

Acceptance test procedure MICON software exhaust fan control modifications  

Science Conference Proceedings (OSTI)

This acceptance test verifies the MICON program changes for the new automatic transfer switch ATS-2 alarms, the Closed Loop Cooling isolator status, the CB-3 position alarm, and the alarms for the new emergency fan damper backup air compressor.

SILVAN, G.R.

1999-05-21T23:59:59.000Z

146

Searching optimal shapes for blades of a fan  

E-Print Network (OSTI)

A nonlinear differential equation about optimal shapes for blades of a fan. A boundary value differential problem from engineering, geometrical or physical bonds. A relation between linear profiles and constant speed along the side under flow.

Gianluca Argentini

2008-03-26T23:59:59.000Z

147

Sinewave parameter estimation using the fast fan-chirp transform  

E-Print Network (OSTI)

Sinewave analysis/synthesis has long been an important tool for audio analysis, modification and synthesis. The recently introduced fan-chirp Transform (FChT) [2,3] has been shown to improve the fidelity of sinewave parameter ...

Dunn, Robert B.

148

Developing a Standard Test Method for Characterizing Fan-filter...  

NLE Websites -- All DOE Office Websites (Extended Search)

Developing a Standard Test Method for Characterizing Fan-filter Units Used in Industries Speaker(s): Tim Xu Date: July 21, 2008 - 12:00pm Location: 90-3122 Seminar HostPoint of...

149

Variable Speed Fan Retrofits for Computer Room Air Conditioners  

NLE Websites -- All DOE Office Websites (Extended Search)

Variable-Speed Fan Retrofits for Computer-Room Air Conditioners Prepared for the U.S. Department of Energy Federal Energy Management Program Technology Case Study Bulletin By...

150

Use of VFDs on Asphalt Plant Induced Draft Fans  

E-Print Network (OSTI)

Studies of 10 asphalt plants in the Intermountain Region have identified average ID fan energy savings of 68% by controlling airflow using Variable Frequency Drives (VFDs) on the fan motors in place of damper control (inlet or outlet). Average paybacks were 3-5 years before utility incentives. In the 10 plants evaluated, the ID fans accounted for as much as 30% of the total plant electrical consumption. In the majority of these plants the outlet dampers were typically 50%-60% closed. Fan motors ranged from 200 Hp to 500 Hp. With approximately 3,600 existing asphalt plants in operation across the United States, a large opportunity for retrofits exists. Working with manufacturers and owners, a new standard can be established for installing VFDs on all plants.

Anderson, G. R.; Case, P. L.; Lowery, J.

2005-01-01T23:59:59.000Z

151

Crossover distributions at the edge of the rarefaction fan  

E-Print Network (OSTI)

We consider the weakly asymmetric limit of simple exclusion process with drift to the left, starting from step Bernoulli initial data with $\\rho_-fan. We study the fluctuations of the process observed along slopes in the fan, which are given by the Hopf--Cole solution of the Kardar-Parisi-Zhang (KPZ) equation, with appropriate initial data. For slopes strictly inside the fan, the initial data is a Dirac delta function and the one point distribution functions have been computed in [Comm. Pure Appl. Math. 64 (2011) 466-537] and [Nuclear Phys. B 834 (2010) 523-542]. At the edge of the rarefaction fan, the initial data is one-sided Brownian. We obtain a new family of crossover distributions giving the exact one-point distributions of this process, which converge, as $T\

Ivan Corwin; Jeremy Quastel

2010-06-07T23:59:59.000Z

152

A Tip Driven Fan Based on SERAPHIM Technology  

SciTech Connect

SERAPHIM technology appears capable of efficiently driving a tip driven fan. If the motor is powered using an inverter and resonant circuit, the size and weight could be considerably below that of a comparable rotary electric motor.

MARDER, BARRY M.

2002-01-01T23:59:59.000Z

153

Designing Axial Flow Fan for Flow and Noise  

E-Print Network (OSTI)

A comprehensive finite element methodology is developed to predict the compressible flow performance of a non-symmetric 7-blade axial flow fan, and to quantify the source strength and sound pressure levels at any location in the system. The acoustic and flow performances of the fan are predicted simultaneously using a computational aero-acoustic technique combining transient flow analysis and noise propagation. The calculated sound power levels compare favorably with the measured sound power data per AMCA 300-96 code.

Subrata Roy; Phillip Cho; Fred Périé; International Off-highway

1999-01-01T23:59:59.000Z

154

Best Practice for Energy Efficient Cleanrooms: Fan-FilterUnits  

Science Conference Proceedings (OSTI)

The HVAC systems in cleanrooms may use 50 percent or more of the total cleanroom energy use. Fan energy use accounts for a significant portion (e.g., over 50%) of the HVAC energy use in cleanrooms such as ISO Classes 3, 4, or 5. Three types of air-handling systems for recirculating airflows are commonly used in cleanrooms: (1) fan-tower systems with pressurized plenum, (2) ducted HEPA systems with distributed-fans, and (3) systems with fan-filter units. Because energy efficiency of the recirculation systems could vary significantly from system type to system type, optimizing aerodynamic performance in air recirculation systems appears to be a useful approach to improve energy efficiency in cleanrooms. Providing optimal airflows through careful planning, design and operation, including air change rate, airflow uniformity, and airflow speed, is important for controlling particle contamination in cleanrooms. In practice, the use of fan-filter units (FFUs) in the air-handling system is becoming more and more popular because of this type of system may offer a number of advantages. Often modular and portable than traditional recirculation airflow systems, FFUs are easier to install, and can be easily controlled and monitored to maintain filtration performance. Energy efficiency of air handling systems using fan-filter units can, however, be lower than their counterparts and may vary significantly from system to system because of the difference in energy performance, airflow paths, and the operating conditions of FFUs.

Xu, Tengfang

2005-06-15T23:59:59.000Z

155

COOLING FAN AND SYSTEM PERFORMANCE AND EFFICIENCY IMPROVEMENTS  

Science Conference Proceedings (OSTI)

Upcoming emissions regulations (Tiers 3, 4a and 4b) are imposing significantly higher heat loads on the cooling system than lesser regulated machines. This work was a suite of tasks aimed at reducing the parasitic losses of the cooling system, or improving the design process through six distinct tasks: 1. Develop an axial fan that will provide more airflow, with less input power and less noise. The initial plan was to use Genetic Algorithms to do an automated fan design, incorporating forward sweep for low noise. First and second generation concepts could not meet either performance or sound goals. An experienced turbomachinery designer, using a specialized CFD analysis program has taken over the design and has been able to demonstrate a 5% flow improvement (vs 10% goal) and 10% efficiency improvement (vs 10% goal) using blade twist only. 2. Fan shroud developments, using an 'aeroshroud' concept developed at Michigan State University. Performance testing at Michigan State University showed the design is capable of meeting the goal of a 10% increase in flow, but over a very narrow operating range of fan performance. The goal of 10% increase in fan efficiency was not met. Fan noise was reduced from 0 to 2dB, vs. a goal of 5dB at constant airflow. The narrow range of fan operating conditions affected by the aeroshroud makes this concept unattractive for further development at this time 3. Improved axial fan system modeling is needed to accommodate the numbers of cooling systems to be redesigned to meet lower emissions requirements. A CFD fan system modeling guide has been completed and transferred to design engineers. Current, uncontrolled modeling practices produce flow estimates in some cases within 5% of measured values, and in some cases within 25% of measured values. The techniques in the modeling guide reduced variability to the goal of + 5% for the case under study. 4. Demonstrate the performance and design versatility of a high performance fan. A 'swept blade mixed flow' fan was rapid prototyped from cast aluminum for a performance demonstration on a small construction machine. The fan was mounted directly in place of the conventional fan (relatively close to the engine). The goal was to provide equal airflow at constant fan speed, with 75% of the input power and 5 dB quieter than the conventional fan. The result was a significant loss in flow with the prototype due to its sensitivity to downstream blockage. This sensitivity to downstream blockage affects flow, efficiency, and noise all negatively, and further development was terminated. 5. Develop a high efficiency variable speed fan drive to replace existing slipping clutch style fan drives. The goal for this task was to provide a continuously variable speed fan drive with an efficiency of 95%+ at max speed, and losses no greater than at max speed as the fan speed would vary throughout its entire speed range. The process developed to quantify the fuel savings potential of a variable speed fan drive has produced a simple tool to predict the fuel savings of a variable speed drive, and has sparked significant interest in the use of variable speed fan drive for Tier 3 emissions compliant machines. The proposed dual ratio slipping clutch variable speed fan drive can provide a more efficient system than a conventional single ratio slipping clutch fan drive, but could not meet the established performance goals of this task, so this task was halted in a gate review prior to the start of detailed design. 6. Develop a cooling system air filtration device to allow the use of automotive style high performance heat exchangers currently in off road machines. The goal of this task was to provide a radiator air filtration system that could allow high fin density, louvered radiators to operate in a find dust application with the same resistance to fouling as a current production off-road radiator design. Initial sensitivity testing demonstrated that fan speed has a significant impact on the fouling of radiator cores due to fine dusts, so machines equipped with continuously variabl

Ronald Dupree

2005-07-31T23:59:59.000Z

156

Induced draft fan innovation for heat recovery steam generators  

SciTech Connect

A first of its kind, induced draft (ID) heat recovery steam generators (HRSG) have been in service at a cogeneration facility since 1991. A preliminary engineering study considered a forced draft (FD) fan to supply combustion air to the HRSG duct burners (when the combustion turbine (CT) is out of service) as a traditional design; however, the study indicated that the FD fan may require the HRSG duct burner to be shut off following a CT trip and re-ignited after the FD fan was in service. Although the induced draft HRSG design cost more than the FD fan design, the induced draft design has improved the cogeneration facility's steam generation reliability by enabling the HRSG to remain in service following a CT trip. This paper briefly summarizes the preliminary engineering study that supported the decision to select the ID fan design. The paper also discusses the control system that operates the fresh-air louvers, duct burners, HRSG, and ID fan during a CT trip. Startup and operating experiences are presented that demonstrate the effectiveness of the design. Lessons learned are also summarized for input into future induced draft HRSG designs.

Beasley, O.W.; Hutchins, E.C. (Oklahoma Gas and Electric Co., Oklahoma City, OK (United States)); Predick, P.R.; Vavrek, J.M. (Sargent and Lundy, Chicago, IL (United States))

1994-04-01T23:59:59.000Z

157

Record of Communication Concerning Ceiling Fan and Ceiling Fan Light Kit Framework Document—Docket No. EERE-2012-BT-STD-0045  

Energy.gov (U.S. Department of Energy (DOE))

This memo provides an overview of communications made to DOE staff on the subject of possible changes to standards and test procedures for ceiling fans and ceiling fan light kits.

158

Ceiling Fan and Ceiling Fan Light Kit use in the U.S. Results of a Survey on Amazon Mechanical Turk  

E-Print Network (OSTI)

air conditioning .31   3.7   Impact of ceiling fans on air conditioningowners increased the air conditioning thermostat temperature

Kantner, Colleen L.S.

2013-01-01T23:59:59.000Z

159

Measured Natural Cooling Enhancement of a While House Fan  

E-Print Network (OSTI)

An experimental study was carried out in the summer of 1991 to investigate the natural cooling potential of use of a whole house fan in Central Florida's hot and humid climate. The residential building, in Cocoa Beach, FL, is typical of much of the existing housing stock in Florida: a concrete block structure with R-11 ceiling insulation. The building was ventilated with all windows open during the three month summer test period (June- August). Air temperatures and relative humidity inside the home interior along with exterior meteorological conditions (insolation, wind speed, air temperature, relative humidity) were scanned every five seconds with integrated averages recorded on a multi-channel data logger every 15- minutes. The house was naturally ventilated during the first half of summer. After a significant period of pre-retrofit summer data had been collected characterizing the building's thermal response, a 24" whole house fan was installed. The house was then force ventilated during evening hours for the remainder of the summer to establish potential of whole-house fans to improve interior comfort conditions. The electrical consumption of the fan was measured at both available fan speeds. Measurements revealed that the building interior was 3 - 6°F cooler during the evening hours after the whole house fan was operated. However, data also showed that nighttime humidity levels rose: relative humidity increased from 74% to 83% during the nighttime period where fan-powered ventilation was used. Using the data results, an analysis was performed using Orlando, Florida TMY data to see how limits to whole house ventilation based on humidity and temperature conditions would affect the potential of such a cooling strategy.

Parker, D. S.

1994-01-01T23:59:59.000Z

160

Modelling the architecture of distal sand-rich lobe deposits : an example from Fan 2, Skoorsteenberg Formation, Tanqua Karoo, South Africa.  

E-Print Network (OSTI)

??Fan 2, one of five submarine fan systems of the Tanqua fan complex in the south-western Karoo Basin, South Africa, is subdivided into Lower, Middle… (more)

Steyn, Rochelle

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Photo of the Week: Fan-tastic | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fan-tastic Fan-tastic Photo of the Week: Fan-tastic August 17, 2012 - 10:30am Addthis In Jonesboro, Arkansas, a Nordex USA employee stands between utility-scale components that will eventually make up a completed wind turbine. Under the Recovery Act, Nordex USA received a tax credit to assist in the creation of the Jonesboro manufacturing facility, which opened in October 2010. | Photo courtesy of Nordex USA. In Jonesboro, Arkansas, a Nordex USA employee stands between utility-scale components that will eventually make up a completed wind turbine. Under the Recovery Act, Nordex USA received a tax credit to assist in the creation of the Jonesboro manufacturing facility, which opened in October 2010. | Photo courtesy of Nordex USA. Sarah Gerrity Sarah Gerrity Multimedia Editor, Office of Public Affairs

162

Cooling Tower Energy Conservation Through Hydraulic Fan Drives  

E-Print Network (OSTI)

Many companies offer gearboxes, shafts, and couplings for cooling tower fan drives, with little or no innovation. These companies have traditionally been purchased with an emphasis on cost and not "Return on Investment!" In the past, when energy conservation or "Return on Investment" was emphasized, the only alternative was to add an expensive frequency inverter for variable speed control. This meant expensive rewiring, placing additional controls in an already crowded control room, or constructing a special building for them. However, with H.E.M.'s patented Hydraulic Fan Drive, one receives variable speed control and more efficiency for approximately the price of a mechanical drive. The new, more efficient Hydraulic Drive allows for a variable speed control and the ability to sense water temperature to control fan speed.

Dickerson, J.

1991-06-01T23:59:59.000Z

163

Field Study of Exhaust Fans for Mitigating Indoor Air Quality Problems: Final Report to Bonneville Power Administration  

E-Print Network (OSTI)

operation at low fan speeds (LBL design) and operation --continuously design in the heat exchangers exhaust fans onDesign The basic objective of this project, to study the effects of exhaust fan

Grimsrud, David T.

2009-01-01T23:59:59.000Z

164

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

E-Print Network (OSTI)

precluded testing the fan based on design data. Since thisStatic Pressure (inWg) fan CFM SF-SP SF-SP-Design-Sim time (supply fan pressure rise) SF- DP SF-DP-Design-simulated D.

Xu, Peng; Haves, Philip

2002-01-01T23:59:59.000Z

165

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

E-Print Network (OSTI)

measurement of airflow rate. Supply fan speed (0-1) SA S.A.Supply Fan test S.B.Fan pressure rise calibration SF-DP-Simulated Pressure

Xu, Peng; Haves, Philip

2002-01-01T23:59:59.000Z

166

Blue fan palm distribution and seed removal patterns in three desert oases of northern Baja California, Mexico  

E-Print Network (OSTI)

DOI 10.1007/s11258-009-9682-4 Blue fan palm distribution anddistribution patterns of the blue fan palm, Brahea armata,i) the levels of blue fan palm seed removal by vertebrates

Wehncke, Elisabet V.; López-Medellín, Xavier; Ezcurra, Exequiel

2010-01-01T23:59:59.000Z

167

Experimental Evaluation of Installed Cooking Exhaust Fan Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Experimental Evaluation of Installed Cooking Exhaust Fan Performance Experimental Evaluation of Installed Cooking Exhaust Fan Performance Title Experimental Evaluation of Installed Cooking Exhaust Fan Performance Publication Type Report LBNL Report Number LBNL-4183E Year of Publication 2010 Authors Singer, Brett C., William W. Delp, and Michael G. Apte Publisher Lawrence Berkeley National Laboratory City Berkeley Keywords airflow & pollutant transport group, cooktop, energy analysis and environmental impacts department, gas burners, indoor air quality, indoor environment department, kitchen, nitrogen dioxide, oven, pollutant emissions, range hood, residential, source control, task ventilation, technology, sustainability and impact assessment group Abstract The installed performance of cooking exhaust fans was evaluated through residential field experiments conducted on a sample of 15 devices varying in design and other characteristics. The sample included two rear downdraft systems, two under-cabinet microwave over range (MOR) units, three different installations of an under-cabinet model with grease screens across the bottom and no capture hood, two devices with grease screens covering the bottom of a large capture hood (one under-cabinet, one wall-mount chimney), four under-cabinet open hoods, and two open hoods with chimney mounts over islands. Performance assessment included measurement of airflow and sound levels across fan settings and experiments to quantify the contemporaneous capture efficiency for the exhaust generated by natural gas cooking burners. Capture efficiency is defined as the fraction of generated pollutants that are removed through the exhaust and thus not available for inhalation of household occupants. Capture efficiency (CE) was assessed for various configurations of burner use (e.g. single front, single back, combination of one front and one back, oven) and fan speed setting. Measured airflow rates were substantially lower than the levels noted in product literature for many of the units. This shortfall was observed for several units costing in excess of $1000. Capture efficiency varied widely (from <5% to roughly 100%) across devices and across conditions for some devices. As expected, higher capture efficiencies were achieved with higher fan settings and the associated higher air flow rates. In most cases, capture efficiencies were substantially higher for rear burners than for front burners. The best and most consistent performance was observed for open hoods that covered all cooktop burners and operated at higher airflow rates. The lowest capture efficiencies were measured when a front burner was used with a rear backdraft system or with lowest fan setting for above the range systems that do not cover the front burners.

168

Income Tax Deduction for Solar-Powered Roof Vents or Fans (Indiana...  

Open Energy Info (EERE)

1232012 References DSIRE1 Summary Indiana allows taxpayers to take a deduction on solar-powered roof fans (or vent, also sometimes called an attic fan) installed in a home...

169

Income Tax Deduction for Solar-Powered Roof Vents or Fans  

Energy.gov (U.S. Department of Energy (DOE))

Indiana allows taxpayers to take a deduction on solar-powered roof fans (or vent, also sometimes called an attic fan) installed in a home that the taxpayer owns or leases. The deduction is for 50%...

170

Laugh out loud in real life : women's humor and fan identity  

E-Print Network (OSTI)

The emerging field of fan studies has, until recently, been defined only by the research that has taken place within it. Almost universally, this research focuses on self-identified fans. However, scholars are beginning ...

Klink, Madeline LeNore

2010-01-01T23:59:59.000Z

171

Experimental investigation of a six inch diameter, four inch span cross-flow fan .  

E-Print Network (OSTI)

??Investigations into the use of a cross-flow fan as a potential source of propulsion and lift have arisen due to the cross-flow fan's geometry, light… (more)

Ulvin, Jessica M.

2008-01-01T23:59:59.000Z

172

Improve the Energy Efficiency of Fan Systems, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes how the Industrial Technologies Program Fan System Assessment Tool (FSAT) can help quantify energy consumption and savings opportunities in industrial fan systems.

Not Available

2008-12-01T23:59:59.000Z

173

An Initial Study on Applying Active Noise Control to an Insulated Box Fan Used in Ventilation System Applications.  

E-Print Network (OSTI)

??In many different applications and buildings fans are used to remove unwanted and used air. These fans often generate broadband and tonal noise. Commonly, passive… (more)

Larsson, Martin; Johansson, Sven; Muddala, S.M.; Gafar, A.E.; Håkansson, Lars; Tarkka, Juhani

2009-01-01T23:59:59.000Z

174

Safety Evaluation of the FuelMaker Home Refueling Concept: Final Report  

DOE Green Energy (OSTI)

Report summarizes results of a National Renewable Energy Laboratory safety evaluation of the FuelMaker natural gas vehicle home refueling appliance (HRA, aka Phill).

Waterland, L. R.; Powars, C.; Stickles, P.

2005-02-01T23:59:59.000Z

175

Acceptance test report MICON software exhaust fan control modifications  

Science Conference Proceedings (OSTI)

This report documents the results the acceptance test HNF-4108 which verifies the MICON program changes for the new automatic transfer switch ATS-2 alarms, the Closed Loop Cooling isolator status, the CB-3 position alarm, the alarms for the new emergency fan damper backup air compressor, and the generator sequencer logic.

SILVAN, G.R.

1999-05-20T23:59:59.000Z

176

Performance of ECM controlled VAV fan powered terminal units  

E-Print Network (OSTI)

Empirical performance models of fan airflow, primary airflow and power consumption were developed for series and parallel variable air volume fan powered terminal units. An experimental setup and test procedure were created to test the terminal units at typical design pressures and airflows. Each terminal unit observed in this study used an 8 in (20.3 cm) primary air inlet. Two fan motor control methods were considered. The primary control of interest was the electronically commutated motor (ECM) controller. Data collected were compared with previous research regarding silicon rectified control (SCR) units. Generalized models were developed for both series and parallel terminal units. Coefficients for performance models were then compared with comparable SCR controlled units. Non-linear statistical modeling was performed using SPSS software (2008). In addition to airflow and power consumption modeling, power quality was also quantified. Relationships between real power (watts) and apparent power (VA) were presented as well as harmonic frequencies and total harmonic distortion. Power quality was recorded for each ECM controlled terminal unit tested. Additional tests were also made to SCR controlled terminal units used in previous research (Furr 2006). The airflow and power consumption performance models had an R2 equal to 0.990 or greater for every terminal unit tested. An air leakage model was employed to account for leakage in the parallel designed VAV terminal units when the internal fan was turned off. For the leakage model, both ECM and SCR controlled units achieved an R2 greater than or equal to 0.918.

Cramlet, Andrew Charles

2008-08-01T23:59:59.000Z

177

The Forming of AISI 409 sheets for fan blade manufacturing  

SciTech Connect

The necessity of adapting the standardized fan models to conditions of higher temperature has emerged due to the growth of concern referring to the consequences of the gas expelling after the Mont Blanc tunnel accident in Italy and France, where even though, with 100 fans in operation, 41 people died. The objective of this work is to present an alternative to the market standard fans considering a new technology in constructing blades. This new technology introduces the use of the stainless steel AISI 409 due to its good to temperatures of gas exhaust from tunnels in fire situation. The innovation is centered in the process of a deep drawing of metallic sheets in order to keep the ideal aerodynamic superficies for the fan ideal performance. Through the impression of circles on the sheet plane it is shown, experimentally, that, during the pressing process, the more deformed regions on the sheet plane of the blade can not reach the deformation limits of the utilized sheet material.

Foroni, F. D.; Menezes, M. A.; Moreira Filho, L. A. [ITA - Aeronautic Technological Institute, IEM, Praca Mal. Eduardo Gomes, 50 - Vila das Acacias - S. J. Campos, Brasil - CEP 1228-900 (Brazil)

2007-04-07T23:59:59.000Z

178

A satisfiability algorithm for constant depth boolean circuits with unbounded fan-in gates  

E-Print Network (OSTI)

Boolean Circuits with Unbounded Fan-In Gates A dissertationAC 0 by allowing unbounded fan-in M OD m 1 , . . . , M OD mSince each gate in ? has fan-in at most k and ? has depth D

Matthews, William Grant

2011-01-01T23:59:59.000Z

179

Fan Aerodynamic Performance Guarantees: Do Your Policies, Procedures and Penalties Provide Adequate Certainty?  

E-Print Network (OSTI)

With few exceptions, fan vendors do not provide a written guarantee regarding aerodynamic performance. Some fan vendors even go so far as to state in their terms and conditions of sale that fan performance is not guaranteed unless it is specifically reque

Kaufman, S. G.; Martin, V.; Falk, M. A.

2004-01-01T23:59:59.000Z

180

Experimental Evaluation of Installed Cooking Exhaust Fan Performance  

SciTech Connect

The installed performance of cooking exhaust fans was evaluated through residential field experiments conducted on a sample of 15 devices varying in design and other characteristics. The sample included two rear downdraft systems, two under-cabinet microwave over range (MOR) units, three different installations of an under-cabinet model with grease screens across the bottom and no capture hood, two devices with grease screens covering the bottom of a large capture hood (one under-cabinet, one wall-mount chimney), four under-cabinet open hoods, and two open hoods with chimney mounts over islands. Performance assessment included measurement of airflow and sound levels across fan settings and experiments to quantify the contemporaneous capture efficiency for the exhaust generated by natural gas cooking burners.Capture efficiency is defined as the fraction of generated pollutants that are removed through the exhaust and thus not available for inhalation of household occupants. Capture efficiency (CE) was assessed for various configurations of burner use (e.g., single front, single back, combination of one front and one back, oven) and fan speed setting. Measured airflow rates were substantially lower than the levels noted in product literature for many of the units. This shortfall was observed for several units costing in excess of $1000. Capture efficiency varied widely (from<5percent to roughly 100percent) across devices and across conditions for some devices. As expected, higher capture efficiencies were achieved with higher fan settings and the associated higher air flow rates. In most cases, capture efficiencies were substantially higher for rear burners than for front burners. The best and most consistent performance was observed for open hoods that covered all cooktop burners and operated at higher airflow rates. The lowest capture efficiencies were measured when a front burner was used with a rear backdraft system or with lowest fan setting for above the range systems that do not cover the front burners.

Singer, Brett C.; Delp, William W.; Apte, Michael G.

2010-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Investor and entrepreneur visits Los Alamos for open coffee  

NLE Websites -- All DOE Office Websites (Extended Search)

Investor and entrepreneur visits for open coffee Investor and entrepreneur visits for open coffee Investor and entrepreneur visits Los Alamos for open coffee Brad Feld, a renowned early-stage investor and entrepreneur, will attend a meeting of the Open Coffee Club networking event. March 29, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

182

Energy Efficient Single Stack Exhaust Fan Systems (E3S3F)  

E-Print Network (OSTI)

This paper first investigates the fan energy performance of a constant air volume exhaust system. Two single stack energy efficient exhaust fan systems (E3S3F) are presented. The E3S3F-I has the static pressure sensor located at the inlet of the exhaust fan. It has been found to consume up to 15% less fan power than conventional constant air volume exhaust systems. The E3S3F-II uses a variable speed device to maintain the static pressure at the entrance of the stack. It consumes up to 60% less fan power than conventional constant volume exhaust systems.

Wang, G.; Liu, M.

2001-01-01T23:59:59.000Z

183

Covered Product Category: Air-Cooled Ice Makers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ice Makers Ice Makers Covered Product Category: Air-Cooled Ice Makers October 7, 2013 - 11:09am Addthis ENERGY STAR Qualified Products FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including air-cooled ice makers, which are covered by the ENERGY STAR® program. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Manufacturers display the ENERGY STAR label on complying models. Check the qualified products list maintained on the ENERGY STAR website to see if a model is ENERGY STAR-qualified. Meeting Energy Efficiency Requirements for Air-Cooled Ice Makers For the most up-to-date efficiency levels required for this product

184

Variable Speed Fan Retrofits for Computer Room Air Conditioners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Variable-Speed Fan Variable-Speed Fan Retrofits for Computer-Room Air Conditioners Prepared for the U.S. Department of Energy Federal Energy Management Program Technology Case Study Bulletin By Lawrence Berkeley National Laboratory Steve Greenberg September 2013 2 Contacts Steve Greenberg Lawrence Berkeley National Laboratory One Cyclotron Road, 90R3111 Berkeley, California 94720 (510) 486-6971 segreenberg@lbl.gov For more information on FEMP, please contact: Will Lintner, P.E., CEM Federal Energy Management Program U.S. Department of Energy 1000 Independence Ave. S.W. Washington, D. C. 20585-0121 (202) 586-3120 william.lintner@ee.doe.gov 3 Acknowledgements EPRI: Dennis Symanski, Brian Fortenbery Synapsense: Garret Smith, Patricia Nealon Vigilent: Corinne Vita

185

The Potential of Anaerobic Digestion Technology to Treat Coffee Waste in Huatusco, Mexico.  

E-Print Network (OSTI)

??This research proposes a system that uses the waste generated by coffee processing to generate biogas and fertilizer, called AD-Coffee Waste System (AD-CWS). The biogas… (more)

Bombardiere, Ysabel Estrada

2006-01-01T23:59:59.000Z

186

Experimental Evaluation of Installed Cooking Exhaust Fan Performance  

Science Conference Proceedings (OSTI)

The installed performance of cooking exhaust fans was evaluated through residential field experiments conducted on a sample of 15 devices varying in design and other characteristics. The sample included two rear downdraft systems, two under-cabinet microwave over range (MOR) units, three different installations of an under-cabinet model with grease screens across the bottom and no capture hood, two devices with grease screens covering the bottom of a large capture hood (one under-cabinet, one wall-mount chimney), four under-cabinet open hoods, and two open hoods with chimney mounts over islands. Performance assessment included measurement of airflow and sound levels across fan settings and experiments to quantify the contemporaneous capture efficiency for the exhaust generated by natural gas cooking burners.Capture efficiency is defined as the fraction of generated pollutants that are removed through the exhaust and thus not available for inhalation of household occupants. Capture efficiency (CE) was assessed for various configurations of burner use (e.g., single front, single back, combination of one front and one back, oven) and fan speed setting. Measured airflow rates were substantially lower than the levels noted in product literature for many of the units. This shortfall was observed for several units costing in excess of $1000. Capture efficiency varied widely (fromfan settings and the associated higher air flow rates. In most cases, capture efficiencies were substantially higher for rear burners than for front burners. The best and most consistent performance was observed for open hoods that covered all cooktop burners and operated at higher airflow rates. The lowest capture efficiencies were measured when a front burner was used with a rear backdraft system or with lowest fan setting for above the range systems that do not cover the front burners.

Singer, Brett C.; Delp, William W.; Apte, Michael G.

2010-11-01T23:59:59.000Z

187

Generator Fan/Blower Design, Inspection, and Maintenance  

Science Conference Proceedings (OSTI)

Turbo-generator rotor cooling fans and blowers are highly stressed components of a generator rotor. As such, their failures can result in expensive damages and extended outages. This best practices document provides guidelines that help plant managers understand potential failure mechanisms and their root causes, anticipate issues before failures occur, and prepare inspection and contingency plans.The guidelines are applicable to both nuclear and fossil turbo-generator rotors. Both axial ...

2012-12-13T23:59:59.000Z

188

Turning on the Fan and Turning off the A/C | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C September 20, 2010 - 3:00pm Addthis As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Part of my research led me to understand how ceiling fans are considered the most effective fans compared among table fans, floor fans, and fans mounted to poles or walls because they effectively circulate the air in a room to create a draft throughout the room.

189

Turning on the Fan and Turning off the A/C | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C Turning on the Fan and Turning off the A/C September 20, 2010 - 3:00pm Addthis As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory As part of some recent money- and energy-savings improvements I've been making to my home, a couple of weeks ago I installed a ceiling fan in my main living room. Part of my research led me to understand how ceiling fans are considered the most effective fans compared among table fans, floor fans, and fans mounted to poles or walls because they effectively circulate the air in a room to create a draft throughout the room.

190

Profit-charging market makers with bounded loss, vanishing bid/ask spreads, and unlimited market depth  

Science Conference Proceedings (OSTI)

Four desiderata for automated market makers have appeared in the literature: (1) bounded loss, (2) the ability to make a profit, (3) a vanishing bid/ask spread, and (4) unlimited market depth. Intriguingly, market makers that satisfy any three ... Keywords: algorithmic finance, automated market makers, financial markets, liquidity, market making, market microstructure, markets, prediction markets, wagering

Abraham Othman; Tuomas Sandholm

2012-06-01T23:59:59.000Z

191

Savings in electric cooling energy by the use of a whole-house fan. Final report  

Science Conference Proceedings (OSTI)

Hour-by-hour cooling performances of a typical ranch house, with and without the use of a whole-house fan, were compared for the climate conditions throughout the contiguous United States. The comparative analyses were made by the use of NBSWHF, a modified version of NBSLD, to simulate the complex thermal coupling of whole-house-fan ventilated attic space. The calculations were performed for two operational modes: a cyclic fan mode and a stepwise continuous mode.

Kusuda, T.; Bean, J.W.

1981-05-01T23:59:59.000Z

192

How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? September 23, 2010 - 7:30am Addthis On Monday, Chris told you about his new ceiling fan and how it's changed the way he cools his home. In warm weather, ceiling fans cool people (not rooms) by producing a wind-chill effect-which is why you should turn off fans when you leave the room. A ceiling fan allows you to raise the thermostat setting about 4°F with no reduction in comfort. Ceiling fans don't just cool in the summer; you can also reverse the direction in the winter to provide an updraft and force warm air down into the room. How has a ceiling fan affected the way you heat and cool your home? Each Thursday, you have the chance to share your thoughts on a question

193

How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? How Has a Ceiling Fan Affected the Way You Heat and Cool Your Home? September 23, 2010 - 7:30am Addthis On Monday, Chris told you about his new ceiling fan and how it's changed the way he cools his home. In warm weather, ceiling fans cool people (not rooms) by producing a wind-chill effect-which is why you should turn off fans when you leave the room. A ceiling fan allows you to raise the thermostat setting about 4°F with no reduction in comfort. Ceiling fans don't just cool in the summer; you can also reverse the direction in the winter to provide an updraft and force warm air down into the room. How has a ceiling fan affected the way you heat and cool your home? Each Thursday, you have the chance to share your thoughts on a question

194

Parametric System Curves: Correlations Between Fan Pressure Rise and Flow for Large Commercial Buildings  

E-Print Network (OSTI)

distribution, duct design, system curve, fans, leakage iiifan pressure rise and flow measurements over a range of operating conditions. During design,

Sherman, Max

2010-01-01T23:59:59.000Z

195

Toward green systems for cleanrooms: Energy efficient fan-filter units  

E-Print Network (OSTI)

filter unit (FFU), energy efficiency, green system, electricToward Green Systems for Cleanrooms: Energy Efficient Fan-energy efficient models; Market transformation toward “green”

Jeng, Ming-Shan; Xu, Tengfang; Lan, Chao-Ho

2004-01-01T23:59:59.000Z

196

NIST Test Fans the Flames for High-Rise Fire Safety  

Science Conference Proceedings (OSTI)

... Once the fires were under way, a variety of ventilation tests were conducted. For example, in one test, a large fan was placed at the front door to ...

2012-12-17T23:59:59.000Z

197

Toward green systems for cleanrooms: Energy efficient fan-filter units  

E-Print Network (OSTI)

Toward Green Systems for Cleanrooms: Energy Efficient Fan-FFU), energy efficiency, green system, electric power use,are challenges and benefits in green designs that integrate

Jeng, Ming-Shan; Xu, Tengfang; Lan, Chao-Ho

2004-01-01T23:59:59.000Z

198

Fallout fans: Negotiations over text integrity in the age of the active audience.  

E-Print Network (OSTI)

??This study investigated how fans and producers of media texts negotiate text integrity, which is defined as an ideal about the validity, wholeness, and truth… (more)

Milner, Ryan M.

2008-01-01T23:59:59.000Z

199

DISCRETE-FREQUENCY AND BROADBAND NOISE RADIATION FROM DIESEL ENGINE COOLING FANS.  

E-Print Network (OSTI)

??This effort focuses on measuring and predicting the discrete-frequency and broadband noise radiated by diesel engine cooling fans. Unsteady forces developed by the interaction of… (more)

Kim, Geon-Seok

2007-01-01T23:59:59.000Z

200

A Real Reflection of How I Write: Young Adult Female Authors Seizing Agency Through Fan Fiction.  

E-Print Network (OSTI)

??This research project examines ""fan fiction"" (stories based upon existing texts such as movies, books, and video games) written by a young adult female and… (more)

Coleman, Susanna

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Failure of a Fan Hub Blade Made of an A713 Al-Zn Alloy  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2012. Symposium, Failure Analysis and Prevention. Presentation Title, Failure of a Fan Hub Blade ...

202

Topography based fan control for heavy trucks; Topografibaserad kylfläktstyrning för tunga fordon.  

E-Print Network (OSTI)

?? This thesis is a study of how cooling fan control can be improved by using road topography information. Two such controllers are presented, one… (more)

Lerede, Niclas

2009-01-01T23:59:59.000Z

203

Error Sensor Placement for Active Control of an Axial Cooling Fan.  

E-Print Network (OSTI)

??Recent experimental achievements in active noise control (ANC) for cooling fans have used near-field error sensors whose locations are determined according to a theoretical condition… (more)

Shafer, Benjamin M 1979-

2007-01-01T23:59:59.000Z

204

DUCTED FAN INLET/EXIT AND ROTOR TIP FLOWIMPROVEMENTS FOR VERTICAL LIFT SYSTEMS.  

E-Print Network (OSTI)

??Ducted fan based vertical lift systems are excellent candidates to be in the group of the next generation vertical lift vehicles, with many potential applications… (more)

Akturk, Ali

2010-01-01T23:59:59.000Z

205

FLIGHT CONTROL DESIGN OF TANDEM DUCTED FAN AIRCRAFT USING REDUNDANT CONTROL EFFECTORS.  

E-Print Network (OSTI)

??Controllability and stability of ducted fan air vehicles is a challenging problem due to their complex nonlinear aerodynamics and dynamic behavior. At the same time,… (more)

Ozdemir, Gurbuz

2010-01-01T23:59:59.000Z

206

Investigation of performance improvements including application of inlet guide vanes to a cross-flow fan .  

E-Print Network (OSTI)

??The inherent characteristics of a cross-flow fan allowing for easy thrust vectoring as well as potential airfoil boundary layer control make it an attractive propulsive… (more)

Cordero, Samuel F.

2009-01-01T23:59:59.000Z

207

Perimeter fan performance in forced draught air-cooled steam condensers.  

E-Print Network (OSTI)

??ENGLISH ABSTRACT: Axial flow fan arrays form part of air-cooled steam condensers in direct drycooled power plants. This dissertation investigates the performance of axial flow… (more)

Van der Spuy, Sybrand Johannes

2011-01-01T23:59:59.000Z

208

Effect of building airtightness and fan size on the performance of mechanical ventilation systems in new U.S. houses: a critique of ASHRAE standard 62.2-2003  

E-Print Network (OSTI)

Determining Air Leakage Rate by Fan Pressurization. Americanof Building Envelopes by the Fan Pressurization Method.Dominated by Strong Exhaust Fan. ASHRAE Transactions. Vol

Roberson, J.

2004-01-01T23:59:59.000Z

209

Arbitrary surface flank milling of fan, compressor, and impeller blades  

SciTech Connect

It is generally conceived that a blade surface is flank millable if it can be closely approximated by a ruled surface; otherwise the slow machining process of point milling has to be employed. However, the authors have now demonstrated that the ruled surface criterion for flank milling is neither necessary nor sufficient. Furthermore, many complex arbitrary surfaces typical of the blades in fans, axial compressors, and centrifugal impellers in aviation gas turbines are actually closely flank millable and can be rendered exactly flank millable with one or more passes per surface often without sacrificing, indeed usually with gain, in performance.

Wu, C.Y. [Pratt and Whitney Canada Incorporated, Longueuil, Quebec, (Canada). Design Engineering

1995-07-01T23:59:59.000Z

210

CHANGES IN SANDSTONE DISTRIBUTIONS BETWEEN THE UPPER, MIDDLE, AND LOWER FAN IN THE ARKANSAS JACKFORK GROUP  

E-Print Network (OSTI)

This study is a statistical analysis of the sandstone distribution within the Arkansas Jackfork Group which is a passive margin fan complex. Passive margin fan systems are typically associated with long fluvial transport, fed by deltas, wide shelf, efficient basin transport, that result in a bypassing system. Passive margin fans are generally fine-grained, mud rich, and well sorted. These fans can be separated into three units (upper, middle, and lower fan) based on their location within the fan and how the sediments are deposited. Five outcrops from the Arkansas Jackfork Group have been chosen for this study and each were divided into different facies dependent on sandstone percentages in certain bed sets. The amount of sandstone for each facies was calculated and a statistical approximation for each outcrop was determined. Sandstone distribution curves were made for each outcrop to show a graphic representation of how the sandstone is dispersed. After analyzing different upper, middle, and lower fan outcrops, it is clear there is an obvious change in the sandstone percentage and distribution. The upper fan deposit has an overall sandstone percentage of approximately 77.5% and is deposited in beds that are mainly amalgamated; 10-30m thick. Sandstone is deposited moderately even and is quite concentrated throughout the exposure. The middle fan outcrops contain approximately 72.6% sandstone and show similar patterns, except that the amalgamated sandstone beds are not as thick, 5-15m and contain more shale in between layers. As expected the lower fan outcrop is completely different in both sandstone percentage and distribution. The lower fan has approximately 65.4% sandstone. The distribution of sandstone is more concentrated in each of the individual units, or systems, but the overall complex has two systems separated by a massive marine shale bed, 33.5 m, that contains virtually no sand.

Mack, Clayton P.

2009-05-01T23:59:59.000Z

211

Inlet swirl distortion effects on the generation and propagation of fan rotor shock noise  

E-Print Network (OSTI)

A body-force-based fan model for the prediction of multiple-pure-tone noise generation is developed in this thesis. The model eliminates the need for a full-wheel, three-dimensional unsteady RANS simulation of the fan blade ...

Defoe, Jeff (Jeffrey James)

2011-01-01T23:59:59.000Z

212

Innovative Solar Panel Maker Scales Up, Lowering Costs while Creating Jobs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovative Solar Panel Maker Scales Up, Lowering Costs while Innovative Solar Panel Maker Scales Up, Lowering Costs while Creating Jobs Innovative Solar Panel Maker Scales Up, Lowering Costs while Creating Jobs May 16, 2011 - 12:41pm Addthis The end of Abound Solar’s PV manufacturing line | Photo Courtesy of Abound Solar The end of Abound Solar's PV manufacturing line | Photo Courtesy of Abound Solar Minh Le Minh Le Program Manager, Solar Program It's one thing to call solar energy a "growth industry," it's quite another to witness firsthand how quickly a company on the cutting edge of that industry can grow -- all the while growing jobs right here in America. The Department's Photovoltaic (PV) Technology Incubator program has brought me in contact with a number of dynamic solar startups that fit that mold. I

213

The Decision-Makers Forum on a new Paradigm for Nuclear Energy, Final Report  

SciTech Connect

The Decision-Makers' Forum on a New Paradigm for Nuclear Energy was created in response to the challenge by Sen. Pete V. Domenici to begin, "a new dialogue with serious discussion about the full range of nuclear technologies." Sponsored by the Senate Nuclear Issues Caucus, the Forum was organized and facilitated by the Idaho National Engineering and Environmental Laboratory. The participants were decision-makers and key staff from industry, government, the national laboratories, academia and professional societies. Overall, the Forum was designed to capture the ideas of a large number of decision-makers about the high priority actions recommended to help set a new national agenda for nuclear energy. The Forum recommended 10 priority actions toward this end.

Motloch, Chester George

1998-09-01T23:59:59.000Z

214

The Decision-Makers' Forum on a new paradigm for nuclear energy -- Final Report  

SciTech Connect

The Decision-Makers' Forum on a New Paradigm for Nuclear Energy was created in response to the challenge by Sen. Pete V. Domenici to begin, ``a new dialogue with serious discussion about the full range of nuclear technologies.'' Sponsored by the Senate Nuclear Issues Caucus, the Forum was organized and facilitated by the Idaho National Engineering and Environmental Laboratory. The participants were decision-makers and key staff from industry, government, the national laboratories, academia and professional societies. Overall, the Forum was designed to capture the ideas of a large number of decision-makers about the high priority actions recommended to help set a new national agenda for nuclear energy. The Forum recommended 10 priority actions toward this end.

Motloch, C.G.

1998-09-14T23:59:59.000Z

215

Performance Analysis of Dual-Fan, Dual-Duct Constant Volume Air-Handling Units  

E-Print Network (OSTI)

Dual-fan, dual-duct air-handling units introduce outside air directly into the cooling duct and use two variable speed devices to independently maintain the static pressure of the hot and the cold air ducts. Analytical models have been developed to compare fan power and thermal energy consumption of dualfan, dual-duct constant volume air-handling units with single-fan, dual-duct constant volume airhandling units. This study shows that the dual-fan, dual-duct system uses less fan power and less thermal energy during winter, and uses more thermal energy during summer. Thermal energy performance can be significantly improved if the thermal energy penalty can be decreased or eliminated.

Joo, I. S.; Liu, M.

2001-01-01T23:59:59.000Z

216

Impact-resistant boron/aluminum composites for large fan blades  

SciTech Connect

Blade-like specimens were subjected to static ballistic impact testing to determine their relative FOD impact resistance levels. It was determined that a plus or minus 15 deg layup exhibited good impact resistance. The design of a large solid boron/aluminum fan blade was conducted based on the FOD test results. The CF6 fan blade was used as a baseline for these design studies. The solid boron/aluminum fan blade design was used to fabricate two blades. This effort enabled the assessment of the scale up of existing blade manufacturing details for the fabrication of a large B/Al fan blade. Existing CF6 fan blade tooling was modified for use in fabricating these blades.

Oller, T.L.; Salemme, C.T.; Bowden, J.H.; Doble, G.S.; Melnyk, P.

1977-12-01T23:59:59.000Z

217

When the Underwriter is the Market Maker: An Examination of Trading in the IPO Aftermarket  

E-Print Network (OSTI)

This paper examines aftermarket trading of underwriters and unaffiliated market makers in the three month period after an IPO. We find that the lead underwriter is always the dominant market maker, he takes substantial inventory positions in the aftermarket trading, and co-managers play a negligible role in aftermarket trading. The lead underwriter engages in stabilization activity for less successful IPOs, and uses the overallotment option to reduce his inventory risk. Compensation to the underwriter arises primarily from fees, but aftermarket trading does generate positive profits, which are positively related to the degree of underpricing.

Katrina Ellis; Roni Michaely; Maureen O' Hara

2000-01-01T23:59:59.000Z

218

Fast strategies in Maker-Breaker games played on random boards  

E-Print Network (OSTI)

In this paper we analyze classical Maker-Breaker games played on the edge set of a sparse random board $G\\sim \\gnp$. We consider the Hamiltonicity game, the perfect matching game and the $k$-connectivity game. We prove that for $p(n)\\geq \\text{polylog}(n)/n$, the board $G\\sim \\gnp$ is typically such that Maker can win these games asymptotically as fast as possible, i.e. within $n+o(n)$, $n/2+o(n)$ and $kn/2+o(n)$ moves respectively.

Clemens, Dennis; Krivelevich, Michael; Liebenau, Anita

2012-01-01T23:59:59.000Z

219

Fast Strategies In Maker-Breaker Games Played on Random Boards  

E-Print Network (OSTI)

In this paper we analyze classical Maker-Breaker games played on the edge set of a sparse random board G ? Gn,p. We consider the Hamiltonicity game, the perfect matching game and the k-connectivity game. We prove that for p(n) ? polylog(n)/n, the board G ? Gn,p is typically such that Maker can win these games asymptotically as fast as possible, i.e. within n + o(n), n/2 + o(n) and kn/2 + o(n) moves respectively.

Dennis Clemens; Asaf Ferber; Michael Krivelevich; Anita Liebenau

2012-01-01T23:59:59.000Z

220

A passive margin-type submarine fan complex, Permian Ecca Group, South Africa  

Science Conference Proceedings (OSTI)

A submarine fan complex, comprising five arenaceous fan systems separated by basinal shale units, occurs in the southwestern part of the intracratonic Karoo basin in South Africa. Although basin development is related to a subduction zone bordering the palaeo-Pacific ocean to the south of Gondwanaland and the evolution of the Cape Fold Belt, the entire Lower Permian Ecca Group basin-fill succession reflects depositional characteristics of a passive-margin setting. The submarine fan complex, 250 m thick, originated from sediments supplied by Mississippi-type deltas dominating the Ecca coastline. The fine grain-size and low sand/shale ratio of the submarine fan and deltaic deposits reflect the maturity of the ancient river systems. Outcrops of the fan complex are well exposed and cover an area of 650 km{sup 2}. The strata are not affected by folding, and deep erosion allows three-dimensional viewing of mid-fan to outer-fan deposits. Features of interest include stacked lobe deposits displayed along 2.5 km of a 60 m high cliff section, and a transverse cliff section through channel-fill deposits 500 m wide. Paleocurrent directions reveal that each sequence had its own main source area located to the northwest and south of its present geographic location. The cyclic nature of the fan complex is attributed to relative sea-level changes; deposition took place on the basin floor in water depths that do not exceed 500 m. Shoaling of the basin to wave base depths is reflected in the pro-delta and delta front deposits overlying the uppermost fan sequence. Major factors in controlling direction of fan progradation were delta switching and basin floor topography.

Wickens, H.D. (SOEKOR-Pty. Ltd., Parow (South Africa)); Bouma, A.H. (Louisiana State Univ., Baton Rouge (United States))

1991-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Microsoft Word - Control_and_Fan_Improvements_in_CRAHs.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

07E 07E Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Henry Coles and Steve Greenberg, Lawrence Berkeley National Laboratory Corinne Vita, Vigilent Environmental Energy Technologies Division November 2012 DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe

222

Fan-shaped and toric textures of mesomorphic oxadiazoles  

E-Print Network (OSTI)

When a family of non symmetrical heterocycled compounds is investigated, a variety of mesophases can be observed with rather different features. Here we report the behaviour of seven different members among a family of such materials, that consists of mesomorphic oxadiazole compounds. In two of these compounds, the optical microscope investigation shows very interesting behaviours. In their smectic phases, fan-shaped and toric textures, sometimes with periodic instability, are observed. Moreover, the nematic phase displays a texture transition. Texture transitions have been previously observed only inside the nematic phase of some compounds belonging to the families of the oxybenzoic and cyclohexane acids. In these two oxadiazole compounds we can observe what we define as a "toric nematic phase", heating the samples from the smectic phase. The toric nematic texture disappears as the sample is further heated, changing into a smooth texture.

A. Sparavigna; A. Mello; B. Montrucchio

2007-04-11T23:59:59.000Z

223

Democratizing technology: pleasure, utility and expressiveness in DIY and maker practice  

Science Conference Proceedings (OSTI)

DIY, hacking, and craft have recently drawn attention in HCI and CSCW, largely as a collaborative and creative hobbyist practice. We shift the focus from the recreational elements of this practice to the ways in which it democratizes design and manufacturing. ... Keywords: appropriation, craft, design theory, diy, hacking, maker culture, steampunk

Joshua G. Tanenbaum; Amanda M. Williams; Audrey Desjardins; Karen Tanenbaum

2013-04-01T23:59:59.000Z

224

Working with Policy Makers on Their Choices: A Decision Analyst Reminisces  

Science Conference Proceedings (OSTI)

As a decision consultant and researcher, I discuss 40 years of working with policy makers on energy, environmental and foreign policy, defense, and other national issues, making heavy use of applied decision theory. I focus attention on decisions with ... Keywords: applications, decision analysis, government, infrastructure decisions, public policy

Rex V. Brown

2009-03-01T23:59:59.000Z

225

EFFECTS OF OIL ON MARINE ECOSYSTEMS: A REVIEW FOR ADMINISTRATORS AND POLICY MAKERS  

E-Print Network (OSTI)

) the long history of natural oil seepage in the Santa Bar- bara Channel and 2) the unusually heavy winterEFFECTS OF OIL ON MARINE ECOSYSTEMS: A REVIEW FOR ADMINISTRATORS AND POLICY MAKERS DALE R. EVANS1 is reviewed. The focus is on studies on crude oil. and the results are discussed with the purpose of providing

226

Social values and solar energy policy: the policy maker and the advocate  

DOE Green Energy (OSTI)

Solar energy policy makers and advocates have significantly different hierarchies (clusters) of values upon which they evaluate the adoption of solar technologies. Content analysis, which examines the frequency with which policy makers identify different types of values, indicates that they hold economic values to be of primary importance. Environmental, social, and national security values are also substantial elements of the policy makers' value clusters associated with solar energy. This finding is confirmed by a qualitative analysis of policy makers' values. Advocates, on the other hand, assign almost equal weights (33%) to economic values and social values, slightly less weight to environmental values, and significant attention to ethical and security values as well. These results of frequency analysis are made somewhat more complicated by a qualitative interpretation of the advocates' positions. As part of their more holistic approach, several of the advocates indicated that all values discussed by them are instrumental toward achieving higher-order, ethical and environmental values. In addition, our preliminary investigation indicates that neither group is entirely homogeneous. Testing this and other propositions, as well as obtaining a similar picture of the values which the public associates with solar energy, are topics of future research.

Shama, A.; Jacobs, K.

1980-07-01T23:59:59.000Z

227

Property:Building/SPBreakdownOfElctrcityUseKwhM2Fans | Open Energy  

Open Energy Info (EERE)

Fans Fans Jump to: navigation, search This is a property of type String. Fans Pages using the property "Building/SPBreakdownOfElctrcityUseKwhM2Fans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 5.21311928139 + Sweden Building 05K0002 + 18.5995610535 + Sweden Building 05K0003 + 20.3514016294 + Sweden Building 05K0004 + 8.08671679198 + Sweden Building 05K0005 + 16.0166245259 + Sweden Building 05K0006 + 10.358795651 + Sweden Building 05K0007 + 8.3953561818 + Sweden Building 05K0008 + 9.28527472527 + Sweden Building 05K0009 + 12.8398873749 + Sweden Building 05K0010 + 20.0966982674 + Sweden Building 05K0011 + 6.90408963585 + Sweden Building 05K0012 + 8.60719192175 + Sweden Building 05K0013 + 16.7539365907 +

228

Property:Building/SPBreakdownOfElctrcityUseKwhM2CirculationFans | Open  

Open Energy Info (EERE)

CirculationFans CirculationFans Jump to: navigation, search This is a property of type String. Circulation fans Pages using the property "Building/SPBreakdownOfElctrcityUseKwhM2CirculationFans" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 13.3422495258 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 2.80646609789 + Sweden Building 05K0004 + 8.95823904901 + Sweden Building 05K0005 + 5.55016340076 + Sweden Building 05K0006 + 6.81308969891 + Sweden Building 05K0007 + 2.02541916787 + Sweden Building 05K0008 + 0.625641025641 + Sweden Building 05K0009 + 7.59721281624 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.757191316527 + Sweden Building 05K0012 + 6.04077487892 + Sweden Building 05K0013 + 0.767224182906 +

229

Quiet Computing with BSD: Fan control with sysctl hw.sensors.  

E-Print Network (OSTI)

We will discuss the topic of fan control and introduce sysctl-based interfacing with the fancontrolling capabilities of microprocessor system hardware monitors on OpenBSD. The discussed prototype implementation reduces the noise and power-consumption characteristics in fans of personal computers, especially of those PCs that are designed from off-the-shelf components. We further argue that our prototype is easier, robuster and more intuitive to use compared to solutions available elsewhere. 1.

Constantine A. Murenin; Raouf Boutaba

2010-01-01T23:59:59.000Z

230

Root-Cause Failure Analysis: Fossil-Fired Power Plant Draft Fans  

Science Conference Proceedings (OSTI)

This report describes the collection and analysis of fan-related outage data for 61 large fossil fuel steam power plants. The outage causes are ranked in terms of their impact on production, and a systematic search for generic root causes is described. Recommendations are made for short-term corrective measures and for longer-term research efforts to significantly improve fan system reliability.

1983-07-01T23:59:59.000Z

231

Application of Adjustable Speed Drives to Induced Draft Fans at NSP-SHERCO Power Plant  

Science Conference Proceedings (OSTI)

Induced draft (ID) fans on power boilers control the flow of flue gasses from the boiler to the atmosphere-and their smooth operation is essential to the efficient operation of any generating station. Adjustable speed drive (ASD) control of an electric motor ID fan can provide significant energy savings while increasing the accuracy and precision of boiler draft and fuel gas flow regulation. This study quantified the energy savings and identified other benefits of applying ASDs to four existing electric-...

1999-10-19T23:59:59.000Z

232

Generation of fan-states of radiation field in a cavity  

E-Print Network (OSTI)

A scheme of generating recently introduced fan-states | \\alpha, 2k>_F (\\alpha is complex, k=1,2,3,...) is proposed basing on a \\Lambda-type atom-cavity field interaction. We show that with suitable atomic preparations and measurements a passage of a sequence of N atoms through a cavity may transform an initial field coherent state | \\alpha> to a fan-state | \\alpha, 2k>_F with k=2^{N-2}.

Nguyen Ba An; Truong Minh Duc

2001-11-30T23:59:59.000Z

233

Engine having hydraulic and fan drive systems using a single high pressure pump  

DOE Patents (OSTI)

An engine comprises a hydraulic system attached to an engine housing that includes a high pressure pump and a hydraulic fluid flowing through at least one passageway. A fan drive system is also attached to the engine housing and includes a hydraulic motor and a fan which can move air over the engine. The hydraulic motor includes an inlet fluidly connected to the at least one passageway.

Bartley, Bradley E. (Manito, IL); Blass, James R. (Bloomington, IL); Gibson, Dennis H. (Chillicothe, IL)

2000-01-01T23:59:59.000Z

234

Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Focus Area: Solar Topics: Potentials & Scenarios Website: cleanenergysolutions.org/tools/solar Equivalent URI: cleanenergysolutions.org/content/global-solar-opportunity-tool-tool-po Language: English The Global Solar Opportunity Tool enables analysis and visualization of the technical and economic potential for solar electric technologies ranging

235

Limit processes for TASEP with shocks and rarefaction fans  

E-Print Network (OSTI)

We consider the totally asymmetric simple exclusion process (TASEP) with two-sided Bernoulli initial condition, i.e., with left density rho_- and right density rho_+. We consider the associated height function, whose discrete gradient is given by the particle occurrences. Macroscopically one has a deterministic limit shape with a shock or a rarefaction fan depending on the values of rho_{+/-}. We characterize the large time scaling limit of the fluctuations as a function of the densities rho_{+/-} and of the different macroscopic regions. Moreover, using a slow decorrelation phenomena, the results are extended from fixed time to the whole space-time, except along the some directions (the characteristic solutions of the related Burgers equation) where the problem is still open. On the way to proving the results for TASEP, we obtain the limit processes for the fluctuations in a class of corner growth processes with external sources, of equivalently for the last passage time in a directed percolation model with two-sided boundary conditions. Additionally, we provide analogous results for eigenvalues of perturbed complex Wishart (sample covariance) matrices.

Ivan Corwin; Patrik L. Ferrari; Sandrine Péché

2010-02-18T23:59:59.000Z

236

Parametric System Curves: Correlations Between Fan Pressure Rise and Flow for Large Commercial Buildings  

SciTech Connect

A substantial fraction of HVAC energy use in large commercial buildings is due to fan operation. Fan energy use depends in part on the relationship between system pressure drop and flow through the fan, which is commonly called a "system curve." As a step toward enabling better selections of air-handling system components and analyses of common energy efficiency measures such as duct static pressure reset and duct leakage sealing, this paper shows that a simple four-parameter physical model can be used to define system curves. Our model depends on the square of the fan flow, as is commonly considered. It also includes terms that account for linear-like flow resistances such as filters and coils, and for supply duct leakage when damper positions are fixed or are changed independently of static pressure or fan flow. Only two parameters are needed for systems with variable-position supply dampers (e.g., VAV box dampers modulating to control flow). For these systems, reducing or eliminating supply duct leakage does not change the system curve. The parametric system curve may be most useful when applied to field data. Non-linear techniques could be used to fit the curve to fan pressure rise and flow measurements over a range of operating conditions. During design, when measurements are unavailable, one could use duct design calculation tools instead to determine the coefficients.

Sherman, Max; Wray, Craig

2010-05-19T23:59:59.000Z

237

Applicability of fan spray nozzles to stripping insoluble gases from viscous liquids  

SciTech Connect

Fan spray nozzle stripping appears to be a practical technique for separating dilute volatile solutes from nonvolatile solvents. In particular this technique can be used to strip molecular tritium and tritium fluoride at extremely small concentration (in the parts per million range) from molten salts used as blanket materials in a fusion reactor. Under adjusted operating conditions of the fan spray as it leaves the nozzle, a high percentage of the theoretically maximum achievable stripping would take place from the expanding sheet of the fan spray as it leaves the nozzle and before it breaks up. Although the only available experimental data are for aqueous solutions, a new theoretical analysis of the fan spray sheet demonstrates the applicability of this technique to nonaqueous liquids. The equation derived from this analysis relates the theoretically achievable mass transfer efficiency to the properties of the liquid flowing through the fan spray nozzle and to the operating conditions of the nozzle. Any fluid with viscosity higher than or equal to that of water would be expected to follow this equation as long as a fan-shaped sheet is formed under the operating conditions of the nozzle.

Tseng, H.H.; Johnson, E.F.

1983-08-01T23:59:59.000Z

238

The noise power spectrum in CT with direct fan beam reconstruction  

Science Conference Proceedings (OSTI)

The noise power spectrum (NPS) is a useful metric for understanding the noise content in images. To examine some unique properties of the NPS of fan beam CT, the authors derived an analytical expression for the NPS of fan beam CT and validated it with computer simulations. The nonstationary noise behavior of fan beam CT was examined by analyzing local regions and the entire field-of-view (FOV). This was performed for cases with uniform as well as nonuniform noise across the detector cells and across views. The simulated NPS from the entire FOV and local regions showed good agreement with the analytically derived NPS. The analysis shows that whereas the NPS of a large FOV in parallel beam CT (using a ramp filter) is proportional to frequency, the NPS with direct fan beam FBP reconstruction shows a high frequency roll off. Even in small regions, the fan beam NPS can show a sharp transition (discontinuity) at high frequencies. These effects are due to the variable magnification and therefore are more pronounced as the fan angle increases. For cases with nonuniform noise, the NPS can show the directional dependence and additional effects.

Baek, Jongduk; Pelc, Norbert J. [Department of Radiology, Stanford University, Stanford, California 94305 (United States); Department of Radiology, Stanford University, Stanford, California 94305 (United States); Department of Electrical Engineering, Stanford University, Stanford, California 94305 (United States) and Department of Bioengineering, Stanford University, Stanford, California 94305 (United States)

2010-05-15T23:59:59.000Z

239

Channel complex architecture of fine-grained submarine fans at the base-of-slope  

Science Conference Proceedings (OSTI)

The fan-valley or upper fan channel connects the submarine canyon on the outer shelf-upper slope to the basin proper. It is an erosionally-formed channel that is a conduit for sediment transported to the basin. The valley may widen where it enters the base-of-slope area. Most of the density flows are much smaller than the initial flow and therefore will not occupy the entire width of the upper fan channel. Smaller individual channels will be constructed resulting in a massive fill comprised of amalgamated sandstones. Sand-rich levees and overbank deposits flank each channel. Channel switching may take place toward locations with a slightly steeper gradient. These switches most likely result from irregular flow successions and different flow sizes. Erosion between successive channels is common, removing part of the channel fill and levee-overbank deposits. This results in a disorderly distribution of low-permeability barriers creating local obstruction to connectivity. A study of the sedimentological architecture of the updip mid-fan channel complex was conducted on cliff sections of the Permian Tanqua Karoo subbasin in South Africa, and in Big Rock Quarry in North Little Rock, Arkansas. Seismic records of the base-of-slope of the Mississippi Fan show a widening pattern, and of the Bryant Canyon Fan Complex south of the Sigsbee Escarpment the channel complexity. Integration of seismic data in outcrop observations improves our understanding of the complexity of many good reservoir sands, typically overlain by slope shales.

Bouma, A.H. [Louisiana State Univ., Baton Rouge, LA (United States); Gwang, H. [Kunsan National Univ. (Korea, Democratic People`s Republic of); Van Antwerepen, O. [Univ. of Port Elizabeth (South Africa)] [and others

1995-10-01T23:59:59.000Z

240

Performance of a stand-alone wind-electric ice maker for remote villages  

DOE Green Energy (OSTI)

Two ice makers in the 1.1 metric tons per 24 hours (1.2 tons per day) size range were tested to determine their performance when directly coupled to a variable-frequency wind turbine generator. Initial tests were conducted using a dynamometer to simulate to wind to evaluate whether previously determined potential problems were significant and to define basic performance parameters. Field testing in Norman, Oklahoma, was completed to determine the performance of one of the ice makers under real wind conditions. As expected, the ice makers produced more ice at a higher speed than rated, and less ice at a lower speed. Due to the large start-up torque requirement of reciprocating compressors, the ice making system experienced a large start-up current and corresponding voltage drop which required a larger wind turbine that expected to provide the necessary current and voltage. Performance curves for ice production and power consumption are presented. A spreadsheet model was constructed to predict ice production at a user-defined site given the wind conditions for that location. Future work should include long-term performance tests and research on reducing the large start-up currents the system experiences when first coming on line.

Davis, H.C. [National Renewable Energy Lab., Golden, CO (United States); Brandemuehl, M.J. [University of Colorado, Boulder, CO (United States). Joint Center for Energy Management; Bergey, M.L.S. [Bergey Windpower Co., Norman, OK (United States)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Modeling of ECM Controlled Series Fan-powered VAV Terminal Units  

E-Print Network (OSTI)

Semi-empirical models for series fan-powered variable air volume terminal units (FPTUs) were developed based on models of the primary, plenum, fan airflow and the fan power consumption. The experimental setups and test procedures were developed respectively for primary, plenum and fan airflow to test each component of the FPTUs at typical design pressures and airflows. Two sizes of the terminal units from three manufacturers were used in this study. All of the FPTUs were equipped with electronically commutated motors (ECM). Data provided by the models were compared against the data from previous experiments to prove the models’ validity. Regression modeling was performed by using SigmaStat. The model of primary airflow had an R2 above 0.948 for all the terminal units evaluated while the plenum airflow model had an R2 above 0.99. For all the terminal units, the R2 of the fan airflow model was ranged from 0.973 to 0.998. Except for one fan, the fan power consumption model was able to characterize the power performance and had an R2 above 0.986. By combining the airflow and power models, the model for series FPTU was developed. Verification was made to prove the FPTU model’s validity by comparing the measured and predicted data of airflow and power consumption. Correction factors were used in the primary airflow model to compensate for the difference caused by large measurement errors and the system effects. The predicted values were consistent with measurements and no offset was needed in the primary airflow model. Generally, the newly established model was able to describe the airflow performance as well as power consumption of series FPTUs without adding complexity.

Yin, Peng

2010-08-01T23:59:59.000Z

242

Characteristics of some submarine fan channels, Permian Ecca Group, South Africa  

Science Conference Proceedings (OSTI)

The vary well exposed submarine fan complex in the southwestern part of the Karoo basin permits close examination of channel-fills and in places their associated overbank deposits. The complex comprises five arenaceous fan systems some of which attain 60 m in thickness. The fans are vertically stacked and separated by basinal shale deposits; each system with its own direction of growth. The association of channelized sandstone bodies and thin-bedded sandstone and shale packages in an updip position from predominantly stacked lobe deposits suggest preservation of middle fan settings. A 500 m wide, 20 m thick channel-fill consisting massive amalgamated sandstone beds occupying the channel thalweg occurs in a setting dominated by thin-bedded, ripple-laminated sandstone and shale. Gradual thinning of the channel-fill beds toward the channel edges, lack of internal lateral accretion, and a high width to depth ratio suggests a low sinuous to straight channel. The channel-fill is capped by an abandonment facies characterized by ripple-laminated sandstone and shale. Stacked, laterally offset channel-fill deposits with highly erosional contacts and typical well-bedded overbank deposits form channel-overbank complexes and characterize the mid-fan region of the uppermost fan system. Palaeocurrent directions and gradual diminishing of bed-thickness away from the generally massively bedded, amalgamated channel-fill sandstones confirm a simultaneous channel/overbank origin for these deposits. Levee morphology has not been recognized. Both examples of channel-fills cited reveal part of the complexity of the channelized portions of submarine fans and hence the implications thereof in exploring for hydrocarbon reservoirs.

Bouma, A.H. (Louisiana State Univ., Baton Rouge (United States)); Dev Wickens, H. (Soekor, Parow (South Africa))

1991-03-01T23:59:59.000Z

243

Field Study of Exhaust Fans for Mitigating Indoor Air Quality Problems: Final Report to Bonneville Power Administration  

E-Print Network (OSTI)

Fans Air-to-Air Heat Exchangers. . . . . . . . . . . . . . .expected from heat exchangers Ventilation expected fromventilation supplied by heat exchanger and exhaust flow. .

Grimsrud, David T.

2009-01-01T23:59:59.000Z

244

LETTER REPORT INDEPENDENT VERIFICATION OF THE HIGH FLUX BEAM REACTOR DECOMMISSIONING PROJECT FAN HOUSE, BUILDING 704 BNL  

Science Conference Proceedings (OSTI)

5098-LR-01-0 -LETTER REPORT INDEPENDENT VERIFICATION OF THE HIGH FLUX BEAM REACTOR DECOMMISSIONING PROJECT FAN HOUSE, BUILDING 704 BROOKHAVEN NATIONAL LABORATORY

P.C. Weaver

2010-10-22T23:59:59.000Z

245

Caratterizzazione del rumore generato dal fan di motori aeronautici e Metodo inverso per la ricostruzione della sorgente.  

E-Print Network (OSTI)

??Il seguente lavoro tratta una procedura per la ricostruzione della sorgente acustica del fan di un motore turbofan per uso aeronautico mediante metodo inverso. Tale… (more)

BIANCHI, FRANCESCO

2009-01-01T23:59:59.000Z

246

Modeling of Electronically Commutated Motor Controlled Fan-powered Terminal Units  

E-Print Network (OSTI)

Empirical models of airflow and power consumption were developed for series and parallel variable air volume fan powered terminal units (FPTUs). An experimental setup and test procedure were developed to test the terminal units over typical operating ranges. The terminal units in this study used either an 8 in. (20.32 cm) or a 12 in. (30.48 cm) primary air inlet. All terminal units utilized electronically commutated motor (ECM) controllers. Data collected were compared against previous data collected for silicon controlled rectifier (SCR) units. Generalized models were developed for both series and parallel units, and compared against models developed for SCR units. In addition to the performance modeling, power factor and power quality data were also collected for each terminal unit. The power quality analysis included recording and analyzing harmonic distortion for current, voltage, and power up to the 25th harmonic. The total harmonic distortion (THD) was also recorded and presented. For the series terminal units, models were developed for fan airflow, fan power, and primary airflow. The models for fan airflow all had R2 values above 0.987. The models for fan power all had R2 values above 0.968. The models for primary airflow all had R2 values above 0.895. For the parallel terminal units, models were developed for leakage, fan airflow, fan power, and primary airflow. All of the leakage models had R2 values above 0.826. All of the fan airflow models had R2 values above 0.955. All of the fan power models had R2 values above 0.922. All of the primary airflow models had R2 values above 0.872. The real power THD was below 1.5 percent for both series and parallel FPTUs. The current THD ranged from 84 percent to 172 percent for series FPTUs and from 83 percent to 183 percent for parallel FPTUs. The voltage THD was below 1.4 percent for both series and parallel FPTUs. The performance models developed will help improve the accuracy of building energy simulation programs for heating, ventilation, and air conditioning (HVAC) systems utilizing ECM controlled FPTUs. Increasing the accuracy of these simulations will allow HVAC system designers to better optimize their designs for specific building types in a wide variety of climates.

Edmondson, Jacob Lee

2009-12-01T23:59:59.000Z

247

Stay Cool for Less Money with a Ceiling Fan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Stay Cool for Less Money with a Ceiling Fan Stay Cool for Less Money with a Ceiling Fan Stay Cool for Less Money with a Ceiling Fan May 12, 2009 - 5:00am Addthis Allison Casey Senior Communicator, NREL After a few late snowstorms here in Colorado, I am more than ready to turn off the heat and enjoy some warm spring weather. We haven't had any heat waves here yet, but many of you have already been trying to stay cool; our friends in Washington, D.C. were sweltering (by comparison) in 90+°F weather just a couple short weeks ago! Whether you're still anticipating snow or have broken out the sandals and tank tops, you may be starting to think about keeping your summer cooling costs down. One easy way to keep cool while saving money is using a ceiling fan. Did you know that a ceiling fan could allow you to raise the thermostat

248

PCS Nitrogen: Combustion Fan System Optimization Improves Performance and Saves Energy at a Chemical Plant  

Science Conference Proceedings (OSTI)

This U.S. Department of Energy Industrial Technologies Program case study describes how, in 2003, PCS Nitrogen, Inc., improved the efficiency of the combustion fan on a boiler at the company's chemical fertilizer plant in Augusta, Georgia. The project saved $420,000 and 76,400 million British thermal units (MBtu) per year. In addition, maintenance needs declined, because there is now less stress on the fan motor and bearings and less boiler feed water usage. This project was so successful that the company has implemented more efficiency improvements that should result in energy cost savings of nearly $1 million per year.

Not Available

2005-01-01T23:59:59.000Z

249

Property:Building/SPBreakdownOfElctrcityUseKwhM2SmallKitchensCoffeeRms |  

Open Energy Info (EERE)

SmallKitchensCoffeeRms SmallKitchensCoffeeRms Jump to: navigation, search This is a property of type String. Small kitchens / coffee rooms Pages using the property "Building/SPBreakdownOfElctrcityUseKwhM2SmallKitchensCoffeeRms" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 1.20677966102 + Sweden Building 05K0003 + 1.46100917431 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 2.53105456775 + Sweden Building 05K0007 + 1.08639747349 + Sweden Building 05K0008 + 0.910666666667 + Sweden Building 05K0009 + 2.06390811368 + Sweden Building 05K0010 + 3.29519450801 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 1.54234902764 +

250

Property:Building/SPElectrtyUsePercSmallKitchensCoffeeRms | Open Energy  

Open Energy Info (EERE)

SPElectrtyUsePercSmallKitchensCoffeeRms SPElectrtyUsePercSmallKitchensCoffeeRms Jump to: navigation, search This is a property of type String. Small kitchens / coffee rooms Pages using the property "Building/SPElectrtyUsePercSmallKitchensCoffeeRms" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 1.08790487679 + Sweden Building 05K0003 + 2.00386372221 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 3.87651698157 + Sweden Building 05K0007 + 1.65760139145 + Sweden Building 05K0008 + 2.18690390846 + Sweden Building 05K0009 + 3.6502647334 + Sweden Building 05K0010 + 2.19286348568 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 2.23856397763 +

251

Predicting of fan speed for energy saving in HVAC system based on adaptive network based fuzzy inference system  

Science Conference Proceedings (OSTI)

In this paper, a HVAC (heating, ventilating and air-conditioning) system has two different zones was designed and fan motor speed to minimize energy consumption of the HVAC system was controlled by a conventional (proportional-integral-derivative) PID ... Keywords: ANFIS, Air flow control, Energy saving, Fan motor speed predicting, HVAC system, PID control, Temperature control

Servet Soyguder; Hasan Alli

2009-05-01T23:59:59.000Z

252

Procuring Fuel Cells for Stationary Power: A Guide for Federal Facility Decision Makers  

NLE Websites -- All DOE Office Websites (Extended Search)

Procuring Fuel Cells for Stationary Power: Procuring Fuel Cells for Stationary Power: A Guide for Federal Facility Decision Makers OCTOBER 2011 Fuel Cell Technologies Program Oak Ridge National Laboratory 2 October 2011 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily

253

A Strategy for Maker in the Clique Game which Helps to Tackle some Open Problems by Beck  

E-Print Network (OSTI)

We study Maker/Breaker games on the edges of the complete graph, as introduced by Chvatal and Erdos. We show that in the (m:b) clique game played on K_{N}, the complete graph on N vertices, Maker can achieve a K_{q} for q = (m/(log_{2}(b + 1)) - o(1)) * log N, which partially solves an open problem by Beck. Moreover, we show that in the (1:1) clique game played on K_{N} for a sufficiently large N, Maker can achieve a K_{q} in only 2^(2q/3) moves, which improves the previous best bound and answers a question of Beck. Finally we consider the so called tournament game. A tournament is a directed graph where every pair of vertices is connected by a single directed edge. The tournament game is played on K_{N}. At the beginning Breaker fixes an arbitrary tournament T_{q} on q vertices. Maker and Breaker then alternately take turns at claiming one unclaimed edge e and selecting one of the two possible orientations. Maker wins if his graph contains a copy of the goal tournament T_{q}; otherwise Breaker wins. We show ...

Gebauer, Heidi

2009-01-01T23:59:59.000Z

254

Software Verification and Validation Test Report for the HEPA filter Differential Pressure Fan Interlock System  

Science Conference Proceedings (OSTI)

The HEPA Filter Differential Pressure Fan Interlock System PLC ladder logic software was tested using a Software Verification and Validation (V&V) Test Plan as required by the ''Computer Software Quality Assurance Requirements''. The purpose of his document is to report on the results of the software qualification.

ERMI, A.M.

2000-09-05T23:59:59.000Z

255

Automated Aspect Recommendation through Clustering-Based Fan-in Analysis  

Science Conference Proceedings (OSTI)

Identifying code implementing a crosscutting concern (CCC) automatically can benefit the maintainability and evolvability of the application. Although many approaches have been proposed to identify potential aspects, a lot of manual work is typically ... Keywords: ranking metric, automated aspect recommendation, clustering-based fan-in analysis, crosscutting concern, refactorable aspects, aspect mining, method clusters, lexical based clustering

Danfeng Zhang; Yao Guo; Xiangqun Chen

2008-09-01T23:59:59.000Z

256

Power Reduction Scheme of Fans in a Blade System by Considering the Imbalance of CPU Temperatures  

Science Conference Proceedings (OSTI)

In order to develop a data center power efficiency index, we built a test bed of a data center and measured power components and environmental variables in some detail, including the power consumption and temperature of each node, rack and air conditioning ... Keywords: Data center, Power consumption, Power efficiency, CPU temperature, Fan speed

Yuetsu Kodama; Satoshi Itoh; Toshiyuki Shimizu; Satoshi Sekiguchi; Hiroshi Nakamura; Naohiko Mori

2010-12-01T23:59:59.000Z

257

Imbalance of CPU temperatures in a blade system and its impact for power consumption of fans  

Science Conference Proceedings (OSTI)

We are now developing a new metric of data center power efficiency to fairly evaluate the contribution of each improvement for power efficiency. In order to develop it, we built a testbed of a data center and measured power consumption of each components ... Keywords: CPU temperature, Data center, Fan speed, Power consumption, Power efficiency

Yuetsu Kodama; Satoshi Itoh; Toshiyuki Shimizu; Satoshi Sekiguchi; Hiroshi Nakamura; Naohiko Mori

2013-03-01T23:59:59.000Z

258

Experimental Modal Analysis on a Rotating Fan Using Tracking-CSLDV  

Science Conference Proceedings (OSTI)

Continuous Scan Laser Doppler Vibrometry (CSLDV) modifies the traditional mode of operation of a vibrometer by sweeping the laser measurement point continuously over the structure while measuring, enabling one to measure spatially detailed mode shapes quickly and minimizing the inconsistencies that can arise if the structure or test conditions change with time. When a periodic scan path is employed, one can decompose the measurement into the response that would have been measured at each point traversed by the laser and obtain the structure's mode shapes and natural frequencies using conventional modal analysis software. In this paper, continuous-scan vibrometry is performed on a rotating fan, using computer controlled mirrors to track the rotating fan blades while simultaneously sweeping the measurement point over the blades. This has the potential to circumvent the difficulty of attaching contact sensors such as strain gauges, which might modify the structure and invalidate the results. In this work, impact excitation was used to excite a 3-blade fan rotating at various speeds, and the blades were scanned with a cloverleaf pattern that captured the bending of all three blades simultaneously. Some specialized signal processing is helpful in minimizing the effect of rotation frequency harmonics in the measurements, and specific scan strategies are needed to avoid those frequencies, both of these issues are discussed in the paper. While noise in the laser vibrometer does pose some difficulty, the results show that several modes could be extracted and that the tracking-CSLDV results agree with measurements obtained from the parked fan.

Gasparoni, Andrea; Castellini, Paolo; Tomasini, Enrico P. [Dipartimento di Meccanica, Universita Politecnica delle Marche, Via Brecce Bianche, 60131 Ancona (Italy); Allen, Matthew S.; Yang Shifei; Sracic, Michael W. [Department of Engineering Physics, University of Wisconsin-Madison, 535 Engineering Research Building, 1500 Engineering Drive, Madison, WI 53706 (United States)

2010-05-28T23:59:59.000Z

259

Evaluation of ASD Systems for Electric Arc Furnace and Argon Oxygen Decarburization Refiner Baghouse Fans  

Science Conference Proceedings (OSTI)

An adjustable speed drive (ASD) offers opportunities to operate dust collection fans in a more energy efficient manner. This report focuses on the system requirements and provides a method for successfully applying ASDs to dust extraction baghouse systems in a steel melting and refining application in order to realize full energy savings and operational improvements.

1998-01-23T23:59:59.000Z

260

Engineering Task Plan for Hepa Filter Differential Pressure (DP) Fan Interlock Upgrades  

SciTech Connect

This document provides a plan for installation of Differential Pressure (DP) fan interlocks on the primary ventilation systems in selected Tank Farm facilities. This plan contains the engineering tasks required for installation and is summarized by the Acceptance for Beneficial Use list. Individuals responsible for each task are identified and scheduled accordingly.

SIMONS, S.R.

2000-05-19T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Fan to parallel beam conversion in CAT by rubber sheet transformation  

SciTech Connect

A technique for converting fan-beam projections to parallel-beam projections for use in computed tomography is presented. The problem is approached by use of a rubber sheet transformation. Since the data is discretized, an interpolation step is necessary. For densely sampled data this approach appears satisfactory and a significant reduction in photon noise is observable in computer simulations.

Wecksung, G.W.; Kruger, R.P.; Morris, R.A.

1979-01-01T23:59:59.000Z

262

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

clothes drying, ceiling fans, coffee makers, spas, home security clothes drying, ceiling fans, coffee makers, spas, home security systems, microwave ovens, set-top boxes, home audio equipment, rechargeable electronics, and VCR/DVDs. In addition to the major equipment-driven end-uses, the average energy consumption per household is projected for other electric and nonelectric appliances. The module's output includes number Energy Information Administration/Assumptions to the Annual Energy Outlook 2007 19 Pacific East South Central South Atlantic Middle Atlantic New England West South Central West North Central East North Central Mountain AK WA MT WY ID NV UT CO AZ NM TX OK IA KS MO IL IN KY TN MS AL FL GA SC NC WV PA NJ MD DE NY CT VT ME RI MA NH VA WI MI OH NE SD MN ND AR LA OR CA HI Middle Atlantic New England East North Central West North Central Pacific West South Central East South Central

263

Thai decision makers in the United States: attitudes toward technology transfer in a newly industrializing country  

SciTech Connect

The problem of the study was to determine the attitudes of Thai policy makers toward technology transfer into newly industrializing countries such as Thailand. These opinions were considered crucial in determining the direction of industrialization of the country. The study was conducted with a sample of Thai government administrators and business leaders employed in the State of California. Analysis consisted of an item by item comparison of responses and of a ranking of suitable types of technology for Thailand. The study attempted to ascertain attitudes and to determine any similarities and differences between the responses of the two groups. The study concerned itself with three broad questions: (1) do Thai government administrators agree with one another about technology transfer; (2) do Thai business leaders agree with one another; and (3) how do the attitudes of government administrators and business leaders compare. The findings indicated that no appreciable differences could be measured among the government administrators in technology transfer issues. Similarly, business respondents also strongly agreed with one another regarding aspects of technology transfer. Lastly, there was no real difference between the attitudes of business leaders and government administrators.

Suriyakumpol, C.

1985-01-01T23:59:59.000Z

264

INEEL/EXT-04-02506 2 Decision-Makers' Forum on a Unified Strategy for Nuclear Energy  

E-Print Network (OSTI)

.S. leadership in nuclear energy affords considerable benefits to our national security, economic competitivenessINEEL/EXT-04-02506 #12;2 Decision-Makers' Forum on a Unified Strategy for Nuclear Energy The Need for a Unified Strategy vitality of the nuclear science and engineering institutions, took steps to stabilize

265

Science on Saturday attracts science fans of all ages | Princeton Plasma  

NLE Websites -- All DOE Office Websites (Extended Search)

Science on Saturday attracts science fans of all ages Science on Saturday attracts science fans of all ages By Jeanne Jackson DeVoe January 28, 2013 Tweet Widget Facebook Like Google Plus One Joshua E. G. Peek, a Hubble Fellow at Columbia University's Department of Astronomy and son of PPPL physicist and former director Robert Goldston, discusses "Outer Space!" (Photo by Elle Starkman/PPPL Office of Communications) Joshua E. G. Peek, a Hubble Fellow at Columbia University's Department of Astronomy and son of PPPL physicist and former director Robert Goldston, discusses "Outer Space!" Gallery: High school senior Varuni Bewtra comes to the lectures to learn about possible careers in science. (Photo by Photo by Jeanne Jackson DeVoe/PPPL Office of Communications) High school senior Varuni Bewtra comes to the lectures to learn about

266

HEPA Filter Differential Pressure Fan Interlock System Functional Requirements and Technical Design Criteria  

SciTech Connect

Double-shell tanks (DSTs) and Double Contained Receiver Tanks (DCRTs) are actively ventilated, along with certain single-shell tanks (SSTs) and other RPP facilities. The exhaust air stream on a typical primary ventilation system is drawn through two stages of high-efficiency particulate air (HEPA) filtration to ensure confinement of airborne radioactive materials. Active ventilation exhaust stacks require a stack CAM interlock to detect releases from postulated accidents, and to shut down the exhaust fan when high radiation levels are detected in the stack airstream. The stack CAM interlock is credited as a mitigating control to stop continued unfiltered radiological and toxicological discharges from the stack, which may result from an accident involving failure of a HEPA filter. This document defines the initial technical design baseline for a HEPA filter AP fan interlock system.

TUCK, J.A.

2000-05-11T23:59:59.000Z

267

Improving Control of a Dual-Duct Single-Fan Variable Air Volume Systems  

E-Print Network (OSTI)

This paper discusses improved control strategies for dual-duct single-fan variable air volume (VAV) systems. Common control strategy for supply air volume modulation is evaluated, and an improved air volume control strategy that maintains separate cold and hot air duct static pressure set points is presented. The paper also explores the interactions between the cold and hot deck temperatures and duct static pressures, and discusses the impact of non-ideal deck temperature settings on duct static pressures and overall system energy consumption. To compensate the negative impact of non-ideal cold and hot deck temperature set points, the authors propose using real-time duct static pressure readings as feedback signals to fine-tune the deck temperature set points. These new control schemes can reduce simultaneous cooling and heating while reducing fan power consumption.

Wei, G.; Martinez, J.; Minihan, T.; Brundidge, T.; Claridge, D. E.; Turner, W. D.

2003-01-01T23:59:59.000Z

268

Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods.  

Energy.gov (U.S. Department of Energy (DOE))

The meeting was requested by AMCA International to introduce the association’s leadership, standards, and experience in developing fan standards to DOE; to learn more about the DOE process for...

269

Guidelines for Induced Flue Gas Recirculation: Volume 1: Reducing Air/Gas System Resistance and Enhancing Fan Capacity  

Science Conference Proceedings (OSTI)

This document guides users through a logical sequence, or "road map," of activities and decisions for optimizing solutions for fans, ducts, and related equipment in fossil plant combustion air and gas systems.

1999-12-13T23:59:59.000Z

270

Architectural characteristics of fine-grained submarine fans: A model applicable to the Gulf of Mexico  

Science Conference Proceedings (OSTI)

Submarine fan deposits in the Gulf of Mexico, modern and ancient, fall in the category of fine-grained, low overall sand/shale ratio basin-floor fans. Models published over the years that have been applied to both exploration and production are based on sand-rich fans, most of which were deposited in active margin settings. These models should not be used for the Gulf of Mexico or any other deep water system with similar basinal settings. Observations from the excellent outcrops of the Permian Tanqua Karoo in southwestern South Africa, together with information from the modern Mississippi Fan, and the Jackfork turbidites in Arkansas, enable the construction of a model that addresses the architecture of both the macro and meso-scale depositional features of fine-grained turbidite systems. At the entrance to the basin floor the conduit, carved out across the slope, may start to widen. Most of the density flows moving through do not necessarily occupy the conduit`s entire width. The result is a complex of laterally and vertically stacked channel fills and associated levee-overbank deposits with a good degree of connectivity. The channel fills are mostly massive, whereas the levee deposits are low-contrast, low-resistivity thin-bedded sandstones and shales with high permeability. Such sandstones can be potentially very productive. The channels gradually become smaller and as their influence on directing the heads of turbidity currents decreases, oblong sheet sands are deposited, each having a very large width to thickness ratio and a high sand/shale ratio. The vertical stacking patterns within these sheet sands commonly display lateral offset of individual beds or groups of beds, and therefore form a distinct reservoir type with varying internal fluid-flow characteristics.

Bouma, A.H.; Coleman, J.H. [Louisiana State Univ., Baton Rouge, LA (United States); DeV Wickens, H. [and others

1995-10-01T23:59:59.000Z

271

Coffee Can Time Capsule Found at Hanford Site | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coffee Can Time Capsule Found at Hanford Site Coffee Can Time Capsule Found at Hanford Site Coffee Can Time Capsule Found at Hanford Site April 29, 2013 - 12:00pm Addthis The time capsule and its contents will be brought before a DOE Hanford artifact committee that determines what to do with historic Hanford items. The time capsule and its contents will be brought before a DOE Hanford artifact committee that determines what to do with historic Hanford items. Columbia Basin News ran a photo of President Dwight Eisenhower waving at the dedication of nearby McNary Dam in 1954. Columbia Basin News ran a photo of President Dwight Eisenhower waving at the dedication of nearby McNary Dam in 1954. The time capsule and its contents will be brought before a DOE Hanford artifact committee that determines what to do with historic Hanford items.

272

Coffee Can Time Capsule Found at Hanford Site | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coffee Can Time Capsule Found at Hanford Site Coffee Can Time Capsule Found at Hanford Site Coffee Can Time Capsule Found at Hanford Site April 29, 2013 - 12:00pm Addthis The time capsule and its contents will be brought before a DOE Hanford artifact committee that determines what to do with historic Hanford items. The time capsule and its contents will be brought before a DOE Hanford artifact committee that determines what to do with historic Hanford items. Columbia Basin News ran a photo of President Dwight Eisenhower waving at the dedication of nearby McNary Dam in 1954. Columbia Basin News ran a photo of President Dwight Eisenhower waving at the dedication of nearby McNary Dam in 1954. The time capsule and its contents will be brought before a DOE Hanford artifact committee that determines what to do with historic Hanford items.

273

Standard practice for examination of fiberglass reinforced plastic fan blades using acoustic emission  

E-Print Network (OSTI)

1.1 This practice provides guidelines for acoustic emission (AE) examinations of fiberglass reinforced plastic (FRP) fan blades of the type used in industrial cooling towers and heat exchangers. 1.2 This practice uses simulated service loading to determine structural integrity. 1.3 This practice will detect sources of acoustic emission in areas of sensor coverage that are stressed during the course of the examination. 1.4 This practice applies to examinations of new and in-service fan blades. 1.5 This practice is limited to fan blades of FRP construction, with length (hub centerline to tip) of less than 3 m [10 ft], and with fiberglass content greater than 15 % by weight. 1.6 AE measurements are used to detect emission sources. Other nondestructive examination (NDE) methods may be used to evaluate the significance of AE sources. Procedures for other NDE methods are beyond the scope of this practice. 1.7 Units—The values stated in either SI units or inch-pound units are to be regarded separately as sta...

American Society for Testing and Materials. Philadelphia

2010-01-01T23:59:59.000Z

274

Design, testing and two-dimensional flow modeling of a multiple-disk fan  

Science Conference Proceedings (OSTI)

A multiple-disk Tesla type fan has been designed, tested and analyzed two-dimensionally using the conservation of angular momentum principle. Experimental results showed that such multiple-disk fans exhibited exceptionally low performance characteristics, which could be attributed to the low viscosity, tangential nature of the flow, and large mechanical energy losses at both suction and discharge sections that are comparable to the total input power. By means of theoretical analysis, local and overall shearing stresses on the disk surfaces have been determined based on tangential and radial velocity distributions of the air flow of different volume flow rates at prescribed disk spaces and rotational speeds. Then the total power transmitted by rotating disks to air flow, and the power acquired by the air flow in the gap due to transfer of angular momentum have been obtained by numerically integrating shearing stresses over the disk surfaces. Using the measured shaft and hydraulic powers, these quantities were utilized to evaluate mechanical energy losses associated with the suction and discharge sections of the fan. (author)

Engin, Tahsin; Oezdemir, Mustafa; Cesmeci, Sevki [Department of Mechanical Engineering, The University of Sakarya, Esentepe Campus, 54187 Sakarya (Turkey)

2009-11-15T23:59:59.000Z

275

Random fan-out state induced by site-random interlayer couplings  

Science Conference Proceedings (OSTI)

We study the low-temperature properties of a classical Heisenberg model with site-random interlayer couplings on the cubic lattice. This model is introduced as a simplified effective model of Sr(Fe{sub 1-x}Mn{sub x})O{sub 2}, which was recently synthesized. In this material, when x=0.3, ({pi}{pi}{pi}) and ({pi}{pi}0) mixed ordering is observed by neutron diffraction measurements. Using Monte Carlo simulations, we find an exotic bulk spin structure that explains the experimentally obtained results. We name this spin structure the ''random fan-out state.'' The mean-field calculations provide an intuitive understanding of this phase being induced by the site-random interlayer couplings. Since Rietveld analysis assuming the random fan-out state agrees well with the neutron diffraction pattern of Sr(Fe{sub 0.7}Mn{sub 0.3})O{sub 2}, we conclude that the random fan-out state is reasonable for the spin-ordering pattern of Sr(Fe{sub 0.7}Mn{sub 0.3})O{sub 2} at the low-temperature phase.

Tamura, Ryo; Kawashima, Naoki; Yamamoto, Takafumi; Tassel, Cedric; Kageyama, Hiroshi [Institute for Solid State Physics, University of Tokyo, 5-1-5 Kashiwa-no-ha, Kashiwa, Chiba 277-8581 (Japan); Department of Energy and Hydrocarbon Chemistry, Graduate School of Engineering, Kyoto University, Nishikyouku, Kyoto 615-8510 (Japan)

2011-12-01T23:59:59.000Z

276

Procuring Stationary Fuel Cells For CHP: A Guide for Federal Facility Decision Makers  

DOE Green Energy (OSTI)

Federal agency leaders are expressing growing interest in using innovative fuel cell combined heat and power (CHP) technology at their sites, motivated by both executive branch sustainability targets and a desire to lead by example in the transition to a clean energy economy. Fuel cell CHP can deliver reliable electricity and heat with 70% to 85% efficiency. Implementing this technology can be a high efficiency, clean energy solution for agencies striving to meet ambitious sustainability requirements with limited budgets. Fuel cell CHP systems can use natural gas or renewable fuels, such as biogas. Procuring Stationary Fuel Cells for CHP: A Guide for Federal Facility Decision Makers presents an overview of the process for planning and implementing a fuel cell CHP project in a concise, step-by-step format. This guide is designed to help agency leaders turn their interest in fuel cell technology into successful installations. This guide concentrates on larger (100 kW and greater) fuel cell CHP systems and does not consider other fuel cell applications such as cars, forklifts, backup power supplies or small generators (<100 kW). Because fuel cell technologies are rapidly evolving and have high up front costs, their deployment poses unique challenges. The electrical and thermal output of the CHP system must be integrated with the building s energy systems. Innovative financing mechanisms allow agencies to make a make versus buy decision to maximize savings. This guide outlines methods that federal agencies may use to procure fuel cell CHP systems with little or no capital investment. Each agency and division, however, has its own set of procurement procedures. This guide was written as a starting point, and it defers to the reader s set of rules if differences exist. The fuel cell industry is maturing, and project developers are gaining experience in working with federal agencies. Technology improvements, cost reductions, and experienced project developers are making fuel cell projects easier to put into service. In this environment, federal decision makers can focus on being smart buyers of fuel cell energy instead of attempting to become experts in fuel cell technology. For agencies that want to pursue a fuel cell CHP this guide presents a four step process for a successful project. 1. Perform a preliminary screening of the energy needs energy costs and incentives. 2. Compare a detailed project plan. 3. Make a financing and contracting decision. 4. Execute the project plan including financing, installation, and operation. The simplest procurement method is designated funding for the outright purchase of the fuel cell CHP system, although this is usually not the most cost-effective option. This guide describes the following financing options: Power purchase agreement Energy savings performance contract Utility energy services contract Enhanced use lease Fuel cell CHP technology can help federal facility managers comply with agency objectives for reducing energy consumption and air pollution emissions. Fuel cells do not generate particulate pollutants, unburned hydrocarbons or the gases that produce acid rain. Fuel cells emit less carbon dioxide (CO2) than other, less efficient technologies and use of renewable fuels can make them carbon neutral. Fuel cell CHP technology can deliver reliable electricity and heat with high efficiency (70% to 85%) in a small physical footprint with little noise, making it a cost-effective option for federal facilities.

Stinton, David P [ORNL; McGervey, Joseph [SRA International, Inc.; Curran, Scott [ORNL

2011-11-01T23:59:59.000Z

277

Economic Recovery of Oil Trapped at Fan Margins Using Hig Angle Wells Multiple Hydraulic Fractures  

Science Conference Proceedings (OSTI)

The Yowlumne field is a giant field in the southern San Joaquin basin, Kern County, California. It is a deep (13,000 ft) waterflood operation that produces from the Miocene- aged Stevens Sand. The reservoir is interpreted as a layered, fan-shaped, prograding turbidite complex containing several lobe-shaped sand bodies that represent distinct flow units. A high ultimate recovery factor is expected, yet significant quantities of undrained oil remain at the fan margins. The fan margins are not economic to develop using vertical wells because of thinning pay, deteriorating rock quality, and depth. This project attempts to demonstrate the effectiveness of exploiting the northeast distal fan margin through the use of a high- angle well completed with multiple hydraulic- fracture treatments. A high-angle well offers greater pay exposure than can be achieved with a vertical well. Hydraulic-fracture treatments will establish vertical communication between thin interbedded layers and the wellbore. The equivalent production rate and reserves of three vertical wells are anticipated at a cost of approximately two vertical wells. The near-horizontal well penetrated the Yowlumne sand; a Stevens sand equivalent, in the distal fan margin in the northeast area of the field. The well was drilled in a predominately westerly direction towards the interior of the field, in the direction of improving rock quality. Drilling and completion operations proved to be very challenging, leading to a number of adjustments to original plans. Hole conditions resulted in obtaining less core material than desired and setting intermediate casing 1200 ft too high. The 7 in. production liner stuck 1000 ft off bottom, requiring a 5 in. liner to be run the rest of the way. The cement job on the 5 in. liner resulted in a very poor bond, which precluded one of three hydraulic fracture treatments originally planned for the well. Openhole logs confirmed most expectations going into the project about basic rock properties: the formation was shaly with low porosities, and water saturations were in line with expectations, including the presence of some intervals swept out by the waterflood. High water saturations at the bottom of the well eliminated one of the originally planned hydraulic fracture treatments. Although porosities proved to be low, they were more uniform across the formation than expected. Permeabilities of the various intervals continue to be evaluated, but appear to be better than expected from the porosity log model derived in Budget Period One. The well was perforated in all pay sections behind the 5 in. liner. Production rates and phases agree nicely with log calculations, fractional flow calculations, and an analytical technique used to predict the rate performance of the well.

Laue, M.L.

1997-11-21T23:59:59.000Z

278

High-amplitude reflection packets (HARPs) of the Mississippi Fan, Gulf of Mexico  

E-Print Network (OSTI)

Examination of seismic data from the deep-water Gulf of Mexico reveals the presence of High-Amplitude Reflection Packets (HARPs). An analog study conducted by the Ocean Drilling Program Leg 155 identified and described Amazon Fan HARPs as a stacked, relatively unconfined series of graded turbidites overlain by a channel-levee. HARP seismic facies thin laterally and onlap antecedent bathymetry (preexisting submarine topography). HARP areal extent is controlled by antecedent bathymetry and turbidity flow sediment volumes. Mississippi Fan HARP deposition can be described by three depositional models: the "avulsion" model, the "fill and spill" model, and the "transition" model. The "avulsion" depositional model, developed by Flood et al. (1991), describes avulsion of submarine channel-levees by turbidity flows. Subsequent turbidity flows exit the channel-levee at the avulsion point and are deposited as unchannelized HARPs. The "fill and spill" model, developed by Satterfield and Behrens (1990), describes turbidite deposition in the Gulf of Mexico salt province. Initial stages of the "fill and spill" model accurately describe the seismic geometries of HARPs confined by adjacent salt structures. The "transition" model was developed in this study to describe the Gulf of Mexico HARP seismic geometries seen in the transition zone from the salt province to the abyssal plain. The HARPs described by the "transition" model contain an upslope segment confined by salt structures and a downslope segment confined by antecedent bathymetry. Utilizing seismic data from the Gulf of Mexico and core and well-log data from the Amazon Fan, this study has determined that HARPs and related channel-levees have hydrocarbon play potential. HARP sheet sands, internal HARP channel fill, overlying channel-levee fill, and overbank levee sands are potential reservoir units. Detrital carbonate and hemipelagic shale source rocks are in place in the deep-water Gulf of Mexico. In addition, structurally derived migration pathways combine with percolation as potential migration processes. This study integrates identification and description of HARP seismic facies relationships, current and newly developed depositional models, interpretation of stratigraphic controls, HARP internal reservoir architecture, and determination of HARP hydrocarbon potential in order to predict HARP deposition in the Mississippi Fan and other mud-rich fans worldwide.

Francis, Jason Michael

2000-01-01T23:59:59.000Z

279

Information and its management for differentiation of agricultural products: The example of specialty coffee  

Science Conference Proceedings (OSTI)

Prices of most of agricultural commodities show a long-term declining trend. Increasingly markets are signaling demand for differentiated products and in order to increase their incomes farmers and traders are looking to higher value options, including ... Keywords: Agricultural product differentiation, Agricultural supply chains, Information management, Internet-based, Specialty coffee

Norbert Niederhauser; Thomas Oberthür; Sibylle Kattnig; James Cock

2008-05-01T23:59:59.000Z

280

Active Noise Control of a Two-Fan Exhaust-Mounted Array Using Near-Field Control Sources and Error Sensors.  

E-Print Network (OSTI)

??Multiple fans are sometimes used in an array configuration to cool various types of electronic equipment. In addition to adding another noise source, using two… (more)

Rust, Ryan Leonard 1982-

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Reason and reaction: The dual route of decision making process on social media usage: The case of hospitality brand fan pages.  

E-Print Network (OSTI)

??A new phenomenon on Facebook, resulting from social media revolution, is the emergence of numerous Facebook fan pages. This form of online brand community is… (more)

Manthiou, Aikaterini

2012-01-01T23:59:59.000Z

282

Strategy for the Operation of Cooling Towers with variable Speed Fans  

E-Print Network (OSTI)

Within the SPS Cooling Water Project at CERN aimed at the reduction of water consumption, this primary open cooling loop will be closed and all the primary cooling circuit components will be upgraded to the new required duty and brought to the necessary safety and operability standards. In particular the tower fans will be fitted with variable frequency drives to replace the existing two speed motors. This paper presents a study to optimize the operation of SPS cooling towers taking into account outdoor conditions (wet and dry bulb temperatures) and the entirety of the primary circuit in which they will operate.

Iñigo-Golfín, J

2001-01-01T23:59:59.000Z

283

Busemann functions and the speed of a second class particle in the rarefaction fan  

E-Print Network (OSTI)

In this paper we will show how the results found in Cator and Pimentel 2009, about the Busemann functions in last-passage percolation, can be used to calculate the asymptotic distribution of the speed of a single second class particle starting from an arbitrary deterministic configuration which has a rarefaction fan, in either the totally asymetric exclusion process, or the Hammersley interacting particle process. The method will be to use the well known last-passage percolation description of the exclusion process and of the Hammersley process, and then the well known connection between second class particles and competition interfaces.

Eric Cator; Leandro P. R. Pimentel

2010-08-10T23:59:59.000Z

284

FANS - Principle  

Science Conference Proceedings (OSTI)

... detecting all scattered neutrons with energy Ef energies, with moderate ... which changes to optimize intensity during the ...

285

FANS - Overview  

Science Conference Proceedings (OSTI)

... Pyrolytic Graphite [PG(002)], Without small shield: 2.5 meV ? E ? 25.0 meV With small shield: 3.7 meV ? E ? 45.0 meV. ...

286

Influence of provenance on detrital and diagenetic mineralogy of small tertiary fans in southwestern Montana  

SciTech Connect

In the North Boulder River basin in southwestern Montana, alluvial fans of the Renova (Oligocene-Miocene) and the Sixmile Creek (Miocene) Formations were deposited on the flanks of north-south-trending uplifts that also supplied the detritus. The Elkhorn Mountain volcanics (78 m.y.) overlying the Boulder batholith make up the western highlands, a small patch of Precambrian Belt Group rocks occur in the southwest and Paleozoic siliciclastic and carbonate rocks forming the eastern margin. The fan sediments thus allow adequate control for studying the influence of source rocks on detrital and diagenetic mineralogy. Modal analysis of 6228 grains in 31 thin sections shows a decrease of VRF away from the igneous sources (37% to 1% in a north-south transect; 37% to 7% in a west-east transect) along with an increase in quartz (8% to 24% and 3% to 13%) and plagioclase (2% to 16% and 2% to 10%); orthoclase abundance is low except in the southwest. Volcanic ash and glass shards are found in the younger sediments in the northern part of the basin. Their data show a positive correlation between the abundance of orthoclase and kaolinite (north-south transect); between SRF and carbonate cement (west-east transect) and between glass shards and smectite (both north-south and west-east transects). They infer that the diagenetic mineralogy of these sands was controlled essentially by the detrital particles, which were strongly controlled by source rocks in this area.

Olson, J.; Basu, A.

1987-05-01T23:59:59.000Z

287

Correlation efficiency as a tool to establish depositional subenvironments in submarine fans  

Science Conference Proceedings (OSTI)

Depositional units in submarine fan systems commonly are too large to be entirely or sufficiently exposed in an outcrop to properly identify. Channel fills can be massive, bedded, or any combination thereof. The layering can be horizontal or inclined. Typical bedded series can be thick or thin bedded, or a combination with or without a certain cyclicity. Occurrence of sedimentary structures is not yet a decisive interpretation characteristic. At the present, the Lower Permian Skoorsteenberg Formation of the Southwest Karoo in South Africa may be the best example of long, nontilted, outcrops where entire subenvironments can be observed. Using that knowledge, outcrop information from several areas, and ideas from the literature, we attempted correlations in two spillways in the Jackfork Group in Arkansas. A layer-by-layer correlation failed, even after small layer package could be established using an occasional thick shale break, a major slump, or a very thick massive sandstone layer for dividing both sides of the spillway. A [open quotes]semi-logarithmic[close quotes] display of measured thickness provides patterns of variations in layer thickness that normally are sufficiently typical to use as a correlation tool between both sides. This is not a foolproof system and one should consider additional parameters, such as location within the entire fan system. However, the degree of correlatibility helps identify or suggest depositional environments.

Bouma, A.H.; Cook, T.W. (Louisiana State Univ., Baton Rouge, LA (United States)); Devries, M.B. (Exxon Exploration Company, Houston, TX (United States))

1993-09-01T23:59:59.000Z

288

U.S. DOE's Response to the Fukushima Daiichi Reactor Accident: Answers and Data Products for Decision Makers  

Science Conference Proceedings (OSTI)

The Fukushima Daiichi response posed a plethora of scientific questions to the U.S. Department of Energy’s (DOE) radiological emergency response community. As concerns arose for decision makers, the DOE leveraged a community of scientists well-versed in the tenants of emergency situations to provide answers to time-sensitive questions from different parts of the world. A chronology of the scientific Q and A that occurred is presented along with descriptions of the challenges that were faced and how new methods were employed throughout the course of the response.

Reed, A. L.

2012-05-01T23:59:59.000Z

289

Effect of building airtightness and fan size on the performance of mechanical ventilation systems in new U.S. houses: a critique of ASHRAE standard 62.2-2003  

E-Print Network (OSTI)

as sizing a fan to deliver the design ventilation rate (fans and natural infiltration, in order to properly designfans should be as small as necessary to deliver the effective design

Roberson, J.

2004-01-01T23:59:59.000Z

290

Communication with U.S. federal decision makers : a primer with notes on the use of computer models as a means of communication.  

Science Conference Proceedings (OSTI)

This document outlines ways to more effectively communicate with U.S. Federal decision makers by outlining the structure, authority, and motivations of various Federal groups, how to find the trusted advisors, and how to structure communication. All three branches of Federal governments have decision makers engaged in resolving major policy issues. The Legislative Branch (Congress) negotiates the authority and the resources that can be used by the Executive Branch. The Executive Branch has some latitude in implementation and prioritizing resources. The Judicial Branch resolves disputes. The goal of all decision makers is to choose and implement the option that best fits the needs and wants of the community. However, understanding the risk of technical, political and/or financial infeasibility and possible unintended consequences is extremely difficult. Primarily, decision makers are supported in their deliberations by trusted advisors who engage in the analysis of options as well as the day-to-day tasks associated with multi-party negotiations. In the best case, the trusted advisors use many sources of information to inform the process including the opinion of experts and if possible predictive analysis from which they can evaluate the projected consequences of their decisions. The paper covers the following: (1) Understanding Executive and Legislative decision makers - What can these decision makers do? (2) Finding the target audience - Who are the internal and external trusted advisors? (3) Packaging the message - How do we parse and integrate information, and how do we use computer simulation or models in policy communication?

Webb, Erik Karl; Tidwell, Vincent Carroll

2009-10-01T23:59:59.000Z

291

VELOCITY MEASUREMENTS FOR A SOLAR ACTIVE REGION FAN LOOP FROM HINODE/EIS OBSERVATIONS  

Science Conference Proceedings (OSTI)

The velocity pattern of a fan loop structure within a solar active region over the temperature range 0.15-1.5 MK is derived using data from the EUV Imaging Spectrometer (EIS) on board the Hinode satellite. The loop is aligned toward the observer's line of sight and shows downflows (redshifts) of around 15 km s{sup -1} up to a temperature of 0.8 MK, but for temperatures of 1.0 MK and above the measured velocity shifts are consistent with no net flow. This velocity result applies over a projected spatial distance of 9 Mm and demonstrates that the cooler, redshifted plasma is physically disconnected from the hotter, stationary plasma. A scenario in which the fan loops consist of at least two groups of 'strands'-one cooler and downflowing, the other hotter and stationary-is suggested. The cooler strands may represent a later evolutionary stage of the hotter strands. A density diagnostic of Mg VII was used to show that the electron density at around 0.8 MK falls from 3.2 Multiplication-Sign 10{sup 9} cm{sup -3} at the loop base, to 5.0 Multiplication-Sign 10{sup 8} cm{sup -3} at a projected height of 15 Mm. A filling factor of 0.2 is found at temperatures close to the formation temperature of Mg VII (0.8 MK), confirming that the cooler, downflowing plasma occupies only a fraction of the apparent loop volume. The fan loop is rooted within a so-called outflow region that displays low intensity and blueshifts of up to 25 km s{sup -1} in Fe XII {lambda}195.12 (formed at 1.5 MK), in contrast to the loop's redshifts of 15 km s{sup -1} at 0.8 MK. A new technique for obtaining an absolute wavelength calibration for the EIS instrument is presented and an instrumental effect, possibly related to a distorted point-spread function, that affects velocity measurements is identified.

Young, P. R. [College of Science, George Mason University, 4400 University Drive, Fairfax, VA 22030 (United States); O'Dwyer, B.; Mason, H. E. [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, Wilberforce Road, Cambridge, CB3 0WA (United Kingdom)

2012-01-01T23:59:59.000Z

292

A high-resolution 2-DH numerical scheme for process-based modeling of 3-D turbidite fan stratigraphy  

Science Conference Proceedings (OSTI)

A generic three-dimensional process-based model is presented, aimed at simulation of the construction of turbidite fan stratigraphy by low-density turbidity current events. It combines theoretical formulations on density flow and sediment transport of ... Keywords: MacCormack scheme, Operator splitting, Shock-capturing technique, Stratigraphic modeling, Turbidite reservoirs, Turbidity currents

Remco M. Groenenberg; Kees Sloff; Gert Jan Weltje

2009-08-01T23:59:59.000Z

293

Study of the Effects of Ambient Conditions Upon the Performance of Fan Powered, Infrared Natural Gas Burners  

SciTech Connect

The objective of this investigation was to characterize the operation of a fan-powered, infrared burner (IR burner) at various gas compositions and ambient conditions, develop numerical model to simulate the burner performances, and provide design guidelines for appliances containing PIR burners for satisfactory performance.

Clark Atlanta University

2002-12-02T23:59:59.000Z

294

Towards a syntactic signature for domain models: proposed descriptive metrics for visualizing the entity fan-out frequency distribution  

Science Conference Proceedings (OSTI)

The main objective of this paper is to find a minimal set of measures that allow the immediate, intuitive characterisation and visualization of the syntactic structure of models covering a particular application domain. The measures are validated ... Keywords: case measures, enterprise models, entity fan-out distribution, metrics, model analysis, model complexity, modelling

Jean-Paul van Belle

2002-09-01T23:59:59.000Z

295

Optimized Fan Control In Variable Air Volume HVAC Systems Using Static Pressure Resets: Strategy Selection and Savings Analysis  

E-Print Network (OSTI)

The potential of static pressure reset (SPR) control to save fan energy in variable air volume HVAC systems has been well documented. Current research has focused on the creation of reset strategies depending on specific system features. As the commissioning process has begun to require the prediction of savings, knowledge of the extent to which various SPR control strategies impact fan energy has become increasingly important. This research aims to document existing SPR control strategies and utilize building data and simulation to estimate fan energy use. A comprehensive review of the literature pertaining to SPR control was performed and the results were organized into a top-down flow chart tool. Based on the type of feedback available from a particular system, or lack thereof, this tool will facilitate the selection of a SPR control strategy. A field experiment was conducted on a single duct variable air volume system with fixed discharge air temperature and static pressure setpoints. Finally, an air-side model of the experimental system was created using detailed building design information and calibrated using field measurements. This model was used to estimate the fan energy required to supply the trended airflow data using fixed static pressure (FSP) and SPR control based on zone demand, system demand, and outside air temperature. While utilizing trend data from November 1, 2008 to February 12, 2009, the FSP control of the experimental system was used as the baseline for ranking the energy savings potential of nine different forms of duct static pressure control. The highest savings (73-74%) were achieved using zonal demand based SPR control. System demand based SPR control yielded savings ranging from 59 to 76%, which increased when the duct sensor was positioned near the fan discharge and under similar zone load conditions. The outside air temperature based SPR control yielded savings of 65% since the experimental system supplied primarily perimeter zones. Finally, increasing the FSP setpoint from 2 to 3 inWG increased fan energy by 45%, while decreasing the setpoint from 2 to 1 inWG decreased fan energy by 41%.

Kimla, John

2009-12-01T23:59:59.000Z

296

Laboratory evaluation of fan/filter units' aerodynamic and energy performance  

SciTech Connect

The paper discusses the benefits of having a consistent testing method to characterize aerodynamic and energy performance of FFUs. It presents evaluation methods of laboratory-measured performance of ten relatively new, 1220 mm x 610 mm (or 4 ft x 2 ft) fan-filter units (FFUs), and includes results of a set of relevant metrics such as energy performance indices (EPI) based upon the sample FFUs tested. This paper concludes that there are variations in FFUs' performance, and that using a consistent testing and evaluation method can generate compatible and comparable FFU performance information. The paper also suggests that benefits and opportunities exist for our method of testing FFU energy performance to be integrated in future recommended practices.

Xu, Tengfang; Jeng, Ming-Shan

2004-07-27T23:59:59.000Z

297

Sand-rich submarine fans, Mio-Pliocene of Santa Monica Basin, offshore California: Untapped exploration targets  

Science Conference Proceedings (OSTI)

Santa Monica Basin lies directly west of Los Angeles Basin, one of the world's most prolific oil provinces. Published literature suggests that Santa Monica Basin was starved of coarse clastics during the late Miocene through Pliocene. However, seismic sequence stratigraphy indicates that deposition of sand-rich fans alternated with mixed-load systems throughout the Delmontian and Repettian stages. Seismic sequences and facies are calibrated to seismic and well data from Beta Oil Field, in San Pedro Basin to the south. Eustasy evidently played a dominant role in controlling sedimentation. Variations in tan lithology, thickness, and basinward extent correspond to worldwide changes in sea level. Regional erosion surfaces apparently signify drops in sea level. Overlying thick seismic packages display hummocky to chaotic seismic facies separated by high- to low-amplitude continuous reflections. These configurations are interpreted as inner- to mid-fan channels separated by overbank deposits in sand-rich lowstand fans. High-amplitude basinwide reflections bound the tops of the sand-rich intervals, and likely represent condensed sections formed during sea-level rises. Thin seismic intervals above the condensed sections display downlap, and are interpreted as interbedded sandstones and shales of prograding highstand fans. Sediment input to Santa Monica Basin, based on seismic-facies and isochron patterns, was predominantly from the (present-day) north, with subordinate input from the east. High-amplitude eustatic variations dominated deposition and sequence development even in this tectonically active basin Previously unidentified sand-rich fans are present, and have not been drilled.

May, J.A.; McMillen, K.J.

1996-01-01T23:59:59.000Z

298

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

SciTech Connect

An automated fault detection and diagnosis tool for HVAC systems is being developed, based on an integrated, life-cycle, approach to commissioning and performance monitoring. The tool uses component-level HVAC equipment models implemented in the SPARK equation-based simulation environment. The models are configured using design information and component manufacturers' data and then fine-tuned to match the actual performance of the equipment by using data measured during functional tests of the sort using in commissioning. This paper presents the results of field tests of mixing box and VAV fan system models in an experimental facility and a commercial office building. The models were found to be capable of representing the performance of correctly operating mixing box and VAV fan systems and detecting several types of incorrect operation.

Xu, Peng; Haves, Philip

2002-05-16T23:59:59.000Z

299

Performance Optimization of a Fan System- Overcoming Impacts of Modified Design Criteria Due to Regulatory Requirements and Changed Operating Conditions  

E-Print Network (OSTI)

The Louisiana Pacific mill in Tomahawk Wisconsin manufactures oriented-strand board. Several large induced-draft fans and combustion-air blowers were operating inefficiently at this mill. This case study highlights a systems approach that was applied to address fan inefficiency. Energy savings from optimizing the system are estimated to be 338 kW, nearly half of the original measured input power of 678 kW. The project is currently being implemented and will have a payback period of less than 8 months. The opportunities here are typical of opportunities thought to exist in most industrial plants. In this case, process needs changed due to environmental regulations and change of location, but the system did not, leading to low overall system efficiency.

Wroblewski, R. G.; Preis, F.; Smith, R.

1997-04-01T23:59:59.000Z

300

J.L. Liscum-Powell, S.D. Pautz, C.R. Drumm, W.C. Fan, W.J. Bohnhoff...  

National Nuclear Security Administration (NNSA)

of the Ceptre Code to Cable SGEMP Problems J.L. Liscum-Powell, * S.D. Pautz, * C.R. Drumm, * W.C. Fan, * W.J. Bohnhoff, * L.J. Lorence * * Sandia National Laboratories,...

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

GOTHIC Analysis of Containment Fan Cooler Unit (CFCU) Cooling Water Response Following a LOCA with Loss of Offsite Power  

Science Conference Proceedings (OSTI)

This report presents a simplified method to predict the thermal hydraulic status of a containment fan cooling system under a loss of coolant accident (LOCA) with loss of off-site power (LOOP). GOTHIC 5.0c, a general purpose thermal hydraulics computer program for analysis of nuclear power plants and confinements buildings, has been used for the calculation, and the results have been compared with those from RETRAN.

1997-12-23T23:59:59.000Z

302

Final Report Independent Verification Survey of the High Flux Beam Reactor, Building 802 Fan House Brookhaven National Laboratory Upton, New York  

Science Conference Proceedings (OSTI)

On May 9, 2011, ORISE conducted verification survey activities including scans, sampling, and the collection of smears of the remaining soils and off-gas pipe associated with the 802 Fan House within the HFBR (High Flux Beam Reactor) Complex at BNL. ORISE is of the opinion, based on independent scan and sample results obtained during verification activities at the HFBR 802 Fan House, that the FSS (final status survey) unit meets the applicable site cleanup objectives established for as left radiological conditions.

Evan Harpeneau

2011-06-24T23:59:59.000Z

303

Economic Recovery of Oil Trapped at Fan Margins Using High Angle Wells Multiple Hydraulic Fractures  

SciTech Connect

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a prograding turbidite complex through the use of hydraulically fractured horizontal or high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. A high-angle well will be drilled in the fan-margin portion of a slope-basin clastic reservoir and will be completed with multiple hydraulic-fracture treatments. Geologic modeling, reservoir characterization, and fine-grid reservoir simulation will be used to select the well location and orientation. Design parameters for the hydraulic-fracture treatments will be determined, in part, by fracturing an existing test well. Fracture azimuth will be predicted by passive seismic monitoring of a fracture-stimulation treatment in the test well using logging tools in an offset well.

Mike L. Laue

1997-10-30T23:59:59.000Z

304

ECONOMIC RECOVERY OF OIL TRAPPED AT FAN MARGINS USING HIGH ANGLE WELLS AND MULTIPLE HYDRAULIC FRACTURES  

Science Conference Proceedings (OSTI)

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a prograding turbidite complex through the use of hydraulically fractured horizontal or high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. A high-angle well will be drilled in the fan-margin portion of a slope-basin clastic reservoir and will be completed with multiple hydraulic-fracture treatments. Geologic modeling, reservoir characterization, and fine-grid reservoir simulation will be used to select the well location and orientation. Design parameters for the hydraulic-fracture treatments will be determined, in part, by fracturing an existing test well. Fracture azimuth will be predicted by passive seismic monitoring of a fracture-stimulation treatment in the test well using logging tools in an offset well.

Mike L. Laue

1998-11-06T23:59:59.000Z

305

Ultrabroadband optical parametric chirped-pulse amplifier using a fan-out periodically poled crystal with spectral spatial dispersion  

Science Conference Proceedings (OSTI)

Based on the full two-dimensional characteristics of the quasi-phase-matched fan-out periodically poled crystal, a scalable and engineerable scheme for ultrabroadband optical parametric chirped-pulse amplification is proposed, which can significantly broaden the gain bandwidth by the spatial separation of different frequency components of the signal pulse and manipulation of the distribution of the pump beam along the fan-out direction of the crystal. The theoretical analysis shows that the signal pulse can be amplified with minimal spectrum narrowing, and the initial spectrum can be broadened considerably if needed. Based on this scheme, using a fan-out periodically poled 5% mol MgO-doped congruent lithium niobate with a configuration of 5x0.5x5 mm{sup 3} and two pump beams, the 3.3-{mu}m middle-infrared ultrabroadband optical parametric chirped-pulse amplifier is designed. The numerical computation results confirm that the -3 dB gain bandwidth of this amplifier exceeds 320 nm and can be further broadened.

Chen Liezun; Wang Youwen [Key Laboratory for Micro/Nano Optoelectronic Devices of Ministry of Education, School of Information Science and Engineering, Hunan University, Changsha 410082 (China); Department of Physics and Electronic Information Science, Hengyang Normal University, Hengyang 421008 (China); Wen Shuangchun; Fan Dianyuan [Key Laboratory for Micro/Nano Optoelectronic Devices of Ministry of Education, School of Information Science and Engineering, Hunan University, Changsha 410082 (China); You Kaiming [Department of Physics and Electronic Information Science, Hengyang Normal University, Hengyang 421008 (China); Qian Liejia [Department of Optical Science and Engineering, Fudan University, Shanghai 200433 (China)

2010-10-15T23:59:59.000Z

306

Ice maker safety control  

Science Conference Proceedings (OSTI)

In a refrigeration apparatus including an evaporator, a defrost heater for defrosting the evaporator, a defrost thermostat having a switch for de-energizing the defrost heater at a preselected high temperature of the evaporator, and an ice making apparatus having a mold, a mold heater, and a control circuit controllably energized the mold heater, a safety control for the ice making apparatus is described comprising: means for thermally coupling the defrost thermostat with the mold; and means electrically connecting the defrost thermostat switch with the control circuit for de-energizing the mold heater at a preselected high temperature of the mold to prevent overheating thereof.

Linstromberg, W.J.

1988-05-03T23:59:59.000Z

307

Impacts of Static Pressure Reset on VAV System Air Leakage, Fan Power and Thermal Energy - Part I: Theoretical Model and Simulation  

E-Print Network (OSTI)

As for a variable air volume (VAV) system, the air duct static pressure is a typical control variable maintained by modulating supply fan speed. The static pressure equals to the summation of the duct pressure loss downstream of the sensor to the terminal box and box inlet static pressure. Typically, the air duct static pressure is set as a constant set point based on the system design information and sensor location. However, under partial load conditions, the terminal box dampers have to be closed more since either required airflow is less than the design airflow which directly leads to much less pressure loss. Thus the static pressure set point should be reset lower in order to reduce fan power, avoid noise at terminal box dampers and box damper malfunction due to excessive pressure. Different static pressure reset schedules are reviewed and compared, considering the influence of outside air temperature on the building load, availability of the VAV box damper positions, the airflow ratio based static pressure reset has also applicable advantages over the existing constant static pressure set point and two typical reset methods. This paper present the theoretical models to express the impacts of static pressure reset on fan airflow, fan head, air leakage, fan power and thermal energy for both pressure independent and pressure dependent boxes. The impacts are also demonstrated using the parametric analysis and numerical results to show the benefits of the static pressure reset including reducing fan power, cooling energy and heating energy.

Liu, M.; Feng, J.; Wang, Z.; Wu, L.; Zheng, K.; Pang, W.

2007-01-01T23:59:59.000Z

308

Adaptive planning using megavoltage fan-beam CT for radiation therapy with testicular shielding  

Science Conference Proceedings (OSTI)

This study highlights the use of adaptive planning to accommodate testicular shielding in helical tomotherapy for malignancies of the proximal thigh. Two cases of young men with large soft tissue sarcomas of the proximal thigh are presented. After multidisciplinary evaluation, preoperative radiation therapy was recommended. Both patients were referred for sperm banking and lead shields were used to minimize testicular dose during radiation therapy. To minimize imaging artifacts, kilovoltage CT (kVCT) treatment planning was conducted without shielding. Generous hypothetical contours were generated on each 'planning scan' to estimate the location of the lead shield and generate a directionally blocked helical tomotherapy plan. To ensure the accuracy of each plan, megavoltage fan-beam CT (MVCT) scans were obtained at the first treatment and adaptive planning was performed to account for lead shield placement. Two important regions of interest in these cases were femurs and femoral heads. During adaptive planning for the first patient, it was observed that the virtual lead shield contour on kVCT planning images was significantly larger than the actual lead shield used for treatment. However, for the second patient, it was noted that the size of the virtual lead shield contoured on the kVCT image was significantly smaller than the actual shield size. Thus, new adaptive plans based on MVCT images were generated and used for treatment. The planning target volume was underdosed up to 2% and had higher maximum doses without adaptive planning. In conclusion, the treatment of the upper thigh, particularly in young men, presents several clinical challenges, including preservation of gonadal function. In such circumstances, adaptive planning using MVCT can ensure accurate dose delivery even in the presence of high-density testicular shields.

Yadav, Poonam [Department of Human Oncology, University of Wisconsin, Madison, Madison, WI (United States); Department of Medical Physics, University of Wisconsin, Madison, Madison, WI (United States); School of Advance Sciences, Vellore Institue of Technology University, Vellore, Tamil Nadu (India); Kozak, Kevin [Department of Human Oncology, University of Wisconsin, Madison, Madison, WI (United States); Tolakanahalli, Ranjini [Department of Human Oncology, University of Wisconsin, Madison, Madison, WI (United States); Department of Medical Physics, University of Wisconsin, Madison, Madison, WI (United States); Ramasubramanian, V. [School of Advance Sciences, Vellore Institue of Technology University, Vellore, Tamil Nadu (India); Paliwal, Bhudatt R. [Department of Human Oncology, University of Wisconsin, Madison, Madison, WI (United States); Department of Medical Physics, University of Wisconsin, Madison, Madison, WI (United States); University of Wisconsin, Riverview Cancer Centre, Wisconsin Rapids, WI (United States); Welsh, James S. [Department of Human Oncology, University of Wisconsin, Madison, Madison, WI (United States); Department of Medical Physics, University of Wisconsin, Madison, Madison, WI (United States); Rong, Yi, E-mail: rong@humonc.wisc.edu [Department of Human Oncology, University of Wisconsin, Madison, Madison, WI (United States); University of Wisconsin, Riverview Cancer Centre, Wisconsin Rapids, WI (United States)

2012-07-01T23:59:59.000Z

309

ECONOMIC RECOVERY OF OIL TRAPPED AT FAN MARGINS USING HIGH ANGLE WELLS AND MULTIPLE HYDRAULIC FRACTURES  

Science Conference Proceedings (OSTI)

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a prograding turbidite complex through the use of hydraulically fractured horizontal or high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. A high-angle well will be drilled in the fan-margin portion of a slope-basin clastic reservoir and will be completed with multiple hydraulic-fracture treatments. Geologic modeling, reservoir characterization, and fine-grid reservoir simulation will be used to select the well location and orientation. Design parameters for the hydraulic-fracture treatments will be determined, in part, by fracturing an existing test well. Fracture azimuth will be predicted by passive seismic monitoring of a fracture-stimulation treatment in the test well using logging tools in an offset well. The long radius, near horizontal well was drilled during the first quarter of 1996. Well conditions resulted in the 7 in. production liner sticking approximately 900 ft off bottom. Therefore, a 5 in. production liner was necessary to case this portion of the target formation. Swept-out sand intervals and a poor cement bond behind the 5 in. liner precluded two of the three originally planned hydraulic fracture treatments. As a result, all pay intervals behind the 5 in. liner were perforated and stimulated with a non-acid reactive fluid. Following a short production period, the remaining pay intervals in the well (behind the 7 in. liner) were perforated. The well was returned to production to observe production trends and pressure behavior and assess the need to stimulate the new perforations.

Mike L. Laue

2001-09-28T23:59:59.000Z

310

After-hours power status of office equipment and energy use of miscellaneous plug-load equipment  

E-Print Network (OSTI)

industrial refrigerator, S freezer incandescent tracklight, 50 lamps each phone/PBX centrex system coffee maker, residential model microwave oven

Roberson, Judy A.; Webber, Carrie A.; McWhinney, Marla C.; Brown, Richard E.; Pinckard, Margaret; Busch, John F.

2004-01-01T23:59:59.000Z

311

Comparing Two Types of Magnetically- Coupled Adjustable Speed Drives with Variable Frequency Drives in Pump and Fan Applications  

E-Print Network (OSTI)

This paper presents the results from laboratory tests on MagnaDrive Corporations fixed-magnet magnetically-coupled adjustable speed drive (MC-ASD) and Coyote Electronics electromagnetic MC-ASD as compared to a typical variable frequency drive (VFD) for typical fan and pump loads. It also discusses advantages and disadvantages of using mechanical MC-ASD versus VFDs and it provides field experience with VFDs in refrigerated warehouses as well as the fixed magnet MC-ASD in wastewater and other field applications. Laboratory tests for a 50 hp fan retrofit showed electronic VFD savings at 62%, the MagnaDrive Coupling at 39% and PAYBACK Drive at 46%. At $0.06/kWh and list prices, the simple payback for the VFD is 2.4 years, the MagnaDrive is 4.6 years and the PAYBACK is 1.9 years. MagnaDrive has models from 25 to 500 hp while PAYBACK has models from 3 to 200 hp. Contractors to the Northwest Energy Efficiency Alliance have helped to install VFDs for about 300 evaporator fans in over two dozen refrigerated warehouses and to install fixed-magnet MC-ASDs in about 50 applications with about half of these controlling wastewater pumps. The Alliance has no particular field experience with the electcromagnetic coupling. The primary advantages of magnetically coupled adjustable speed drives (MC-ASD) over VFDs come from reduced maintenance, resistance to dirty environments, separation of load vibration from the motor, and less stringent requirements for precise shaft alignment. Field experience indicates reductions in noise and repairs from vibration loads, tolerance of poor electrical power quality, and ease of installation are often more important than energy savings. The MC-ASDs are being used where VFDs have not survived or are considered too complicated.

Anderson, K. J.; Chvala, W. D.

2003-05-01T23:59:59.000Z

312

Market assessment for active solar heating and cooling products. Category B: a survey of decision-makers in the HVAC marketplace. Final report  

DOE Green Energy (OSTI)

A comprehensive evaluation of the market for solar heating and cooling products for new and retrofit markets is reported. The emphasis is on the analysis of solar knowledge among HVAC decision makers and a comprehensive evaluation of their solar attitudes and behavior. The data from each of the following sectors are described and analyzed: residential consumers, organizational and manufacturing buildings, HVAC engineers and architects, builders/developers, and commercial/institutional segments. (MHR)

None

1980-09-01T23:59:59.000Z

313

Impacts of Static Pressure Reset on VAV System Air Leakage, Fan Power and Thermal Energy - Part 2: Case Demonstration for a Typical Climate System  

E-Print Network (OSTI)

In Part 1 of this paper, the theoretical models, integrating the fan airflow, fan head, air leakage factors, are developed to analyze the impacts of the static pressure reset on both pressure dependent and pressure independent terminal boxes. In this part, a simulated air handling unit (AHU) system in Omaha NE is used to demonstrate the energy savings performance in one typical climate year. This AHU system has a static pressure reset system and two constant static pressure systems, one having pressure dependent terminal boxes and one having pressure independent terminal boxes. These simulated systems were compared mainly on the basis of fan power energy consumption and thermal energy consumption in totally a year. The example presents a good agreement with the theoretical model and simulation results. It was also shown that static pressure reset provides a promising and challenging way for the energy performance in VAV system.

Liu, M.; Zheng, K.; Wu, L.; Wang, Z.; Johnson, C.

2007-01-01T23:59:59.000Z

314

Reserve growth through geological characterization of heterogeneous reservoirs - an example from mud-rich submarine fan reservoirs of Permian Spraberry Trend, west Texas  

SciTech Connect

Tight, naturally fractured Permian submarine fan reservoirs in the Midland basin contained more than 10.5 billion bbl of oil at discovery. Ultimate recovery is estimated to average 7% of the original oil in place. At abandonment 4 billion bbl of nonresidual mobile oil will remain in untapped or poorly drained reservoir compartments. This unproduced mobile oil is the target for Spraberry reserve growth through strategic infill drilling. Mid-fan facies of three separate submarine fans are productive in the Shackelford and Preston waterflood units (SPWU) in the central Spraberry Trend. Braided to meandering paleodip-oriented channels are flanked by levees which grade into upward-coarsening, unconfined distal fan sediment. Facies boundaries compartmentalize the reservoir, providing for interwell, stratigraphic entrapment of oil. Field-wide heterogeneity is pronounced. Stacking of channels in the upper Spraberry in the eastern half of the SPWU results in a dip-oriented belt of better reservoir quality. Wells completed in this axis have produced two to six times the amount of oil produced from wells located off of the depo-axis. Although fractures are important in early production, the contribution of matrix porosity is critical throughout the life of the reservoir. Current economics dictate that reserve growth might best be attained by siting new strategic infill wells in depositional axes and by selective recompletions of existing wells in areas of poorer reservoir quality for bypassed oil in undrained reservoir compartments.

Tyler, N.; Gholston, J.C.

1987-05-01T23:59:59.000Z

315

Structure function of the nucleus in the perturbative QCD with $N_c\\to\\infty$ (BFKL pomeron fan diagrams)  

E-Print Network (OSTI)

Equation for the sum of BFKL pomeron fan diagrams is rederived by direct summation and solved numerically for rapidities $y\\leq 50$. At high rapidities y>20 the resulting cross-sections for the scattering of a longitudinally polarized $q\\bar q$ pair on the nucleus cease to depend on its transverse dimension and tend to a constant limit 0.1768 $R_A^2$, which corresponds to scattering of a colour dipole on a black disk. Thus the unitarity is restored and the singularity in the j plane is reduced to a simple pole at j=1.The nuclear structure function at small x behaves as $Q^2\\ln(1/x)$. The found gluon density has a soliton-like form in the $\\log k$ space: its form is close to Gaussian, independent of rapidity, the centermoving towards higher $\\log k$ with a nearly constant velocity as rapidity increases.

M. A. Braun

2000-01-26T23:59:59.000Z

316

Efficiency of a liquid desiccant dehumidification system regenerated by using solar collectors/regenerators with photovoltaic fans  

Science Conference Proceedings (OSTI)

A hybrid solar dehumidification air-conditioning system was used to study the absorption of water vapor from moist air by contacting the air with aqueous solutions that contained from 90 to 94% triethylene glycol (TEG). For the packings of 2-inch polypropylene Jaeger Tri-Packs, which have a surface-to-volume ratio of 157 m{sup 2}/m{sup 3} (48 ft{sup 2}/ft{sup 3}), the efficiency of dehumidification can reach 93.3%. The environmental air was introduced into the dehumidifier cocurrently flowing with the liquid desiccant, and the liquid desiccant was sprayed on the top of the packing material. The air-to-liquid mass flow ratio was controlled in a range of 0.46 to 1.36. As the moisture was absorbed from air by the TEG solution, the solution was diluted. The regeneration of the solution was carried out in 20-piece (38.8 m{sup 2}) basin-type solar collectors/regenerators whose regeneration coefficients of performance are above 0.2. Air generated by photovoltaic fans was blown into the solar collectors/regenerators and carried away the water vapor from the evaporation of the aqueous desiccant solution. On the basis of the experimental results, the system performance is acceptable for most applications.

Tsair-Wang Chung; Wei-Yih Wu; Wen-Jih Yan; Ching-Lin Huang [Industrial Technology Research Institute, Taiwan (China)

1995-04-01T23:59:59.000Z

317

TF30 third-stage composite fan blade service program. Final technical report 1 Jul 1970--31 Dec 1977. [BORSIC/aluminum  

SciTech Connect

The successful application of advanced composites as the structural material for aircraft jet engine rotating parts will significantly reduce engine weight and improve engine performance characteristics. To solve the component design, manufacturing, and quality assurance problems associated with such an application, a program was conducted to design and develop BORSIC/Aluminum third-stage fan blades, which would operate satisfactorily in the TF30-P-7 or P-9 engine models. Program objectives successfully were to improve the existing design of a composite material fan blade, manufacture the blade, and demonstrate its quality by bench and engine environment testing. The scope of the program required to meet these objectives included establishing design and fabrication procedures, developing special tooling, evaluating current nondestructive inspection techniques and adapting these techniques to composite materials, establishing quality assurance criteria, and developing comprehensive bench and engine environment test programs to adequately demonstrate fan-blade quality. During the program, several sets of BORSIC/Aluminum blades weighing 40 percent less than comparable TF30 bill of material titanium blades were successfully produced and tested. On the basis of extensive test program, and with the establishment of quality control criteria and repair procedures, the blades were deemed acceptable for evaluation in a flight program. During the total program, 246 engine-configuration blades were manufactured and non-destructively inspected; with an overall acceptance rate of 92.3%.

Randall, D.G.

1978-05-15T23:59:59.000Z

318

Improved recovery from Gulf of Mexico reservoirs. Volume I (of 4): Task 1, conduct research on mud-rich submarine fans. Final report, February 14, 1995--October 13, 1996  

Science Conference Proceedings (OSTI)

The objective for this portion of the research involved conducting field studies and laboratory investigations to develop and refine models for mud-rich submarine fan architectures used by seismic analysis and reservoir engineers. These research aspects have been presented in two papers as follows: (1) Bouma, A.H., {open_quotes}Review of Fine-Grained Submarine Fans and Turbidite Systems{close_quotes}; (2) Kirkova, J.T. and Lorenzo, J.M., {open_quotes}Synthetic Seismic Modeling of Measured Submarine Fans Sections, Case Study of the Tanqua Complex, Karoo, South Africa{close_quotes} The {open_quotes}Review of Fine-Grained Submarine Fans and Turbidite Systems{close_quotes} by Arnold Bouma discusses research targeted toward stimulating an increase in oil and gas recovery by developing new and improved geological understanding. The {open_quotes}Synthetic Seismic Modeling of Measured Submarine Fan Sections, Case Study of the Tanqua Complex, Karoo, South Africa{close_quotes} by J.T. Kirkova and J.M. Lorenso discusses the limitations of verticle resolution and how this affects the interpretation and characterization of submarine fan complexes.

Kimbrell, W.C.; Bassiouni, Z.A.; Bourgoyne, A.T.

1997-01-13T23:59:59.000Z

319

The Maker not the Tool The Maker not the Tool  

E-Print Network (OSTI)

make any chim- panzee tool, without training and in a few seconds, but stone knapping is an esoteric

320

Effective Prototyping for Software Makers  

Science Conference Proceedings (OSTI)

Much as we hate to admit it, most prototyping practice lacks a sophisticated understanding of the broad concepts of prototyping--and its strategic position within the development process. Often we overwhelm with a high fidelity prototype that designs ... Keywords: Programming, Software Development, User Interfaces

Jonathan Arnowitz; Michael Arent; Nevin Berger

2006-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

TTW - PageMaker 2  

NLE Websites -- All DOE Office Websites (Extended Search)

2, 2004 2, 2004 By the Numbers Second quarterly meeting held in Carlsbad Shipments scheduled to arrive at WIPP week of 4/25/04 - 5/1/04: 27 Total shipments received at WIPP as of 4/21/04: 2,509 Total volume disposed at WIPP as of 4/21/04: 19,550 m 3 FY04 Performance Metrics D E P A R T M E N T O F E N E R G Y U N I T E D S T A T ES O F A M E R I C A TeamWorks TeamWorks TRU A weekly e-newsletter for the Waste Isolation Pilot Plant team The second WIPP quarterly meeting for 2004 took place in Carlsbad this week. It was the 86 th meeting between the state of New Mexico and DOE on WIPP, as stipulated in the DOE and New Mexico Consultation and Coop- eration agreement. Representatives from NMED, EEG, Commercial Vehicle Safety Alliance (CVSA) and interested stakeholders joined CBFO personnel on Tuesday for this important WIPP

322

TTW - PageMaker 2  

NLE Websites -- All DOE Office Websites (Extended Search)

9, 2004 9, 2004 By the Numbers WIPP employee reports from Iraq Shipments scheduled to arrive at WIPP week of 5/2/04 - 5/8/04: 34 Total shipments received at WIPP: 2,529 Total volume disposed at WIPP: 19,711 m 3 FY04 Performance Metrics D E P A R T M E N T O F E N E R G Y U N I T E D S T A T ES O F A M E R I C A TeamWorks TeamWorks TRU A weekly e-newsletter for the Waste Isolation Pilot Plant team Former WTS employee Ricardo Sanchez left WIPP in February to join the Washington Group International organization in Iraq. Sanchez says he exchanged life in the New Mexico desert for a life in the Iraqi desert. But that's where the similarities end. To begin with, the Army base Ricardo and fellow contractors call home experiences mortar shell- ing on a regular basis. A second difference: at WIPP safety is priority one,

323

TTW - PageMaker 2  

NLE Websites -- All DOE Office Websites (Extended Search)

include the first aid, gas and bench contests. Events conclude Friday evening with a banquet and presentation of trophies at the conference center's Carousel House. The public is...

324

Development of a Laboratory Verified Single-Duct VAV System Model with Fan Powered Terminal Units Optimized Using Computational Fluid Dynamics  

E-Print Network (OSTI)

Single Duct Variable Air Volume (SDVAV) systems use series and parallel Fan Powered Terminal Units to control the air flow in conditioned spaces. This research developed a laboratory verified model of SDVAV systems that used series and parallel fan terminal units where the fan speeds were controlled by either Silicon Controlled Rectifiers (SCR) or Electronically Commutated Motors (ECM) motors. As part of the research, the model was used to compare the performance of the systems and to predict the harmonics generated by ECM systems. All research objectives were achieved. The CFD model, which was verified with laboratory measurements, showed the potential to identify opportunities for improvement in the design of the FPTU and accurately predicted the static pressure drop as air passed through the unit over the full operating range of the FPTU. Computational fluid dynamics (CFD) models of typical a FPTU were developed and used to investigate opportunities for optimizing the design of FPTUs. The CFD model identified key parameters required to conduct numerical simulations of FPTU and some of the internal components used to manufacture the units. One key internal component was a porous baffle used to enhance mixing when primary air and induced air entered the mixing chamber. The CFD analysis showed that a pressure-drop based on face velocity model could be used to accurately predict the performance of the FPTU. The SDVAV simulation results showed that parallel FPTUs used less energy overall than series systems that used SCR motors as long as primary air leakage was not considered. Simulation results also showed that series ECM FPTUs used about the same amount of energy, within 3 percent, of parallel FPTU even when leakage was not considered. A leakage rate of 10 percent was enough to reduce the performance of the parallel FPTU to the level of the series SCR system and the series ECM FPTUs outperformed the parallel FPTUs at all weather locations used in the study.

Davis, Michael A.

2010-08-01T23:59:59.000Z

325

FANS - Sample Change  

Science Conference Proceedings (OSTI)

... result of neutrons with incident energies higher than ... between the sample position and the detector bank. ... 60 to 300 seconds per energy point and ...

326

FANS - Changing Monochromators  

Science Conference Proceedings (OSTI)

... designed to maintain high neutron intensity for all incident energies: Copper [Cu ... Thus if one observes strong peaks at high energy transfer, these ...

327

Nien-fan Zhang  

Science Conference Proceedings (OSTI)

... for Autocorrelated Data Advances in Statistics ... Section of Bayesian Statistical Science of American ... Journal of Statistical Computation and Simulation ...

2010-10-04T23:59:59.000Z

328

FANS - Sample Change  

Science Conference Proceedings (OSTI)

... This is achieved by placing a cadmium shield between the sample position and the detector bank. In order to place the ...

329

Study of the effects of ambient conditions upon the performance of fan powdered, infrared, natural gas burners. Quarterly technical progress report, January 1, 1996--March 31, 1996  

DOE Green Energy (OSTI)

The objective of this investigation is to characterize the operation of fan powered infrared burner (PER) at various gas compositions and ambient conditions and develop design guidelines for appliances containing PER burners for satisfactory performance. During this past quarter, a porous radiant burner testing facility consisting of a commercial deep-fat fryer, an FTIR based spectral radiance measurement system, a set of flue gas analysis components, and a fuel gas mixing station was constructed. The measurement capabilities of the system were tested using methane and the test results were found to be consistent with the literature. Various gas mixtures were tested. Results indicated that the stability limits of the burner and emissions vary with fuel gas composition and air/fuel ratio. However, the maximum radiant efficiency of the burner remained constant. Results obtained from this study can be useful to develop optimum design guidelines for PER burner manufacturers.

Bai, T.; Yeboah, Y.D.; Sampath, R.

1996-04-01T23:59:59.000Z

330

COMP-1h.EPS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Did y Did y ou know most of this stuff come s from oil & na t ural gas? NAAW... Are you sure? Yes, it does...even these eyeglasses! C O M M O N P R O D U C T S M A D E F R O M O I L A N D N A T U R A L G A S * Air mattresses Ammonia Antifreeze Antihistamines Antiseptics Artificial turf Artificial limbs Aspirin Awnings Balloons Ballpoint pens Bandages Beach umbrellas Boats Cameras Candles Candies and gum Car battery cases Car enamel Cassettes Caulking CDs/computer disks Cellular phones Clothesline Coffee makers Cold cream Combs Computer keyboards Computer monitors Cortisone Crayons Credit cards Curtains Dashboards Denture adhesives Dentures Deodorant Detergent Dice Dishwashing liquid Drinking cups Dyes Electric blankets Electrical tape Enamel Epoxy paint Eyeglasses Fan belts Faucet washers Fertilizers Fishing boots Fishing lures Fishing rods

331

Economic recovery of oil trapped at fan margins using high angle wells and multiple hydraulic fractures. Quarterly report, July 1--September 30, 1997  

SciTech Connect

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a prograding turbidite complex through the use of hydraulically fractured horizontal or high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore. A high-angle well will be drilled in the fan-margin portion of a slope-basin clastic reservoir and will be completed with multiple hydraulic-fracture treatments. Geologic modeling, reservoir characterization, and fine-grid reservoir simulation will be used to select the well location and orientation. Design parameters for the hydraulic-fracture treatments will be determined, in part, by fracturing an existing test well. Fracture azimuth will be predicted by passive seismic monitoring of a fracture-stimulation treatment in the test well using logging tools in an offset well. The long radius, near horizontal well has been drilled. After pumping a remedial cement squeeze, all pay behind the 5 in. liner was perforated and stimulated. Once wellwork is complete for the existing perforations, a hydraulic fracture treatment will be pumped through a short interval of clustered perforations in the 7 in. liner. Following this frac, all pay behind the 7 in. liner will be perforated and completion operations will be final.

Laue, M.L.

1997-10-30T23:59:59.000Z

332

Fermilab Today  

NLE Websites -- All DOE Office Websites (Extended Search)

Dark Matter Detector 2:30 p.m. Theoretical Physics Seminar - Curia II Speaker: Jiji Fan, Princeton University Title: Heavy Squark at the LHC 3:30 p.m. DIRECTOR'S COFFEE BREAK...

333

VARIATION IN EROSION/DEPOSITION RATES OVER THE LAST FIFTTY YEARS ON ALLUVIAL FAN SURFACES OF L. PLEISTOCENE-MID HOLOCENE AGE, ESTIMATIONS USING 137CS SOIL PROFILE DATA, AMARGOSA VALLEY, NEVADA  

DOE Green Energy (OSTI)

Variations in erosion and deposition for the last fifty years (based on estimates from 137Cs profiles) on surfaces (Late Pleistocene to Late Holocene in age) making up the Fortymile Wash alluvial fan south of Yucca Mountain, is a function of surface age and of desert pavement development or absence. For purposes of comparing erosion and deposition, the surfaces can be examined as three groups: (1) Late Pleistocene surfaces possess areas of desert pavement development with thin Av or sandy A horizons, formed by the trapping capabilities of the pavements. These zones of deposition are complemented by coppice dune formation on similar parts of the surface. Areas on the surface where no pavement development has occurred are erosional in nature with 0.0 +/- 0.0 cm to 1.5 +/- 0.5 cm of erosion occurring primarily by winds blowing across the surface. Overall these surfaces may show either a small net depositional gain or small erosional loss. (2) Early Holocene surfaces have no well-developed desert pavements, but may have residual gravel deposits in small areas on the surfaces. These surfaces show the most consistent erosional surface areas on which it ranges from 1.0 +/-.01 cm to 2.0+/- .01 cm. Fewer depositional forms are found on this age of surface so there is probably a net loss of 1.5 cm across these surfaces. (3) The Late Holocene surfaces show the greatest variability in erosion and deposition. Overbank deposition during floods cover many edges of these surfaces and coppice dune formation also creates depositional features. Erosion rates are highly variable and range from 0.0 +/- 0.0 to a maximum of 2.0+/-.01. Erosion occurs because of the lack of protection of the surface. However, the common areas of deposition probably result in the surface having a small net depositional gain across these surfaces. Thus, the interchannel surfaces of the Fortymile Wash fan show a variety of erosional styles as well as areas of deposition. The fan, therefore, is a dynamic system that primarily responds to the incising of the channels into the upper fan surface, and the development of protecting desert pavements with time.

C. Harrington; R. Kelly; K.T. Ebert

2005-08-26T23:59:59.000Z

334

Fan-beam Reconstruction Methods  

E-Print Network (OSTI)

In a previous paper a technique was developed for finding reconstruction algorithms for arbitrary ray-sampling schemes. The resulting algorithms use a general linear operator, the kernel of which depends on the details ...

Horn, Berthold K.P.

1977-11-01T23:59:59.000Z

335

Warding Off Energy Vampires and Phantom Loads | Department of...  

NLE Websites -- All DOE Office Websites (Extended Search)

coffee makers or cable boxes. These vampires are wicked and wasteful, costing U.S. households an average of 100 per year. Tennessee's Office of Energy Programs (OEP) is working...

336

Final Report: Fan Filter Unit Project  

NLE Websites -- All DOE Office Websites (Extended Search)

61684 61684 Demonstration of Advanced Filtration Technologies: Developing Energy-rebate Criteria through Performing Standard Laboratory Tests and Statistical Analyses Final Report (LBNL- 61684) To California Energy Commission 2007 Tengfang Xu and Duo Wang 2 Disclaimer This document was prepared as an account of work sponsored by the United States Government and California Energy Commission. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor California Energy Commission, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or

337

Introduction of a Cooling Fan Efficiency Index  

E-Print Network (OSTI)

of the cooling effect measured with the thermal manikin andThe mea- sured cooling effect with the thermal manikin isby a thermal manikin to quantify the cooling effects of air

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

338

Introduction of a Cooling Fan Efficiency Index  

E-Print Network (OSTI)

Refrigerating and Air-Conditioning Engineers, Inc. (Refrigerating and Air-Conditioning Engineers, Inc. (Refrigerating and Air-Conditioning Engineers, Inc. (

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

339

Introduction of a Cooling Fan Efficiency Index  

E-Print Network (OSTI)

Thermal Biology 31:53–9. ASHRAE. 2004. ANSI/ASHRAE Standardand field measurements. ASHRAE Transactions 99(2):733–49.system in office building. ASHRAE Transactions 104(1):1153–

Schiavon, Stefano; Melikov, Arsen

2009-01-01T23:59:59.000Z

340

Experimental investigation of an aspirated fan stage  

E-Print Network (OSTI)

This thesis focuses on the use of aspiration on compressor blade design. The pressure ratio can be significantly increased by controlling the development of the blade and endwall boundary layers. This concept is validated ...

Schuler, Brian Joseph, 1974-

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Re-design of a portable fan.  

E-Print Network (OSTI)

?? Abstract This master’s thesis is a project of 20p made in accordance with the requirements set by Halmstad University for a Master’s degree in… (more)

Ivegren, Erica

2007-01-01T23:59:59.000Z

342

Filter-Analyzer Neutron Spectrometer (FANS)  

Science Conference Proceedings (OSTI)

... Soc., Div. Fuel Chem ... H. Kabbour, and CC Ahn, "Hydrogen Adsorption in MOF-74 Studied by Inelastic Neutron Scattering", in Life Cycle Analysis for ...

343

My Faculty Advisor is... Dr. Kent Fanning  

E-Print Network (OSTI)

and absorption of color dissolved organic matter (CDOM) and nutrients in Kings Bay, Crystal River up in our rivers and oceans. Marine life suffer from continuous exposure to these harmful chemical

Meyers, Steven D.

344

Filter-Analyzer Neutron Spectrometer (FANS)  

Science Conference Proceedings (OSTI)

... J. Hwang, "Probing the Unusual Proton and Anion Mobility of LiBH ... Analysis of the Inelastic Neutron Scattering Spectra of Electron Donor-Acceptor ...

345

Contents of Climate Predictions Desired by Agricultural Decision Makers  

Science Conference Proceedings (OSTI)

In-depth interviews with 27 executives in various agribusiness defined usage and needs for climate predictions. Predictions are acquired from various public and private sources but are seldom used in making major decision. Users exhibited little ...

Stanley A. Changnon

1992-12-01T23:59:59.000Z

346

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

, not specifically aimed at biofuels, target the sweeping economy-wide changes needed to reduce the unwanted "leakage SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS CHAPTER 12: KEY MEASUREMENT UNCERTAINTIES FOR BIOFUEL POLICY Chapter 12: Key Measurement Uncertainties for Biofuel Policy Sonia Yeh, Mark A. Delucchi, Alissa Kendall

California at Davis, University of

347

Rational and Intuitive Decision-makers from Two Continents  

Science Conference Proceedings (OSTI)

Strategic decision making is usually conducted by a firm's top management, led by the CEO or the President of the company. In keeping with this, 40 top level managers from two continents (North America and Europe) were targeted in a comparative research ...

Zita Zoltay Paprika

2010-08-01T23:59:59.000Z

348

Commerce, Big 3 US Auto Makers Form New Partnership to ...  

Science Conference Proceedings (OSTI)

... Operations; Mark Chernoby, Vice President, Advanced Vehicle Engineering, DaimlerChrysler ... leadership of US automobile manufacturers and their ...

2012-12-20T23:59:59.000Z

349

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

The Sponsored Research Lifecycle Part I: Finding a Sponsor Institute Workshop Series October 2 of Teaching, 1990 #12;Grant Lifecycle A successful proposal is the outcome of a process of engagement Laboratory: High-energy physics. Idaho National Engineering and Environmental Laboratory: Science

California at Davis, University of

350

Jack Case ? Tool and die maker to plant manager  

NLE Websites -- All DOE Office Websites (Extended Search)

Mr. Case was a native of East Alton, Illinois. He served a four- year Toolmaker apprentice program at Olin Cartridge Company in his home town. Early in his career he worked in...

351

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

TRANSPORTATION ENERGY PATHWAYS CHAPTER 4: COMPARING FUEL ECONOMIES AND COSTS OF ADVANCED VS. CONVENTIONAL VEHICLES PART 2 Chapter 4: Comparing Fuel Economies and Costs of Advanced vs. Conventional Vehicles Andrew-electric vehicles, and electric-drive battery and fuel cell-powered vehicles. We present the results of our

California at Davis, University of

352

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

for conventional crude oil are rising, and direct substitutes for petroleum (such as unconventional oil from oil shale and tar sands) face economic, technical, and environmental challenges. Direct combustion of fossil

California at Davis, University of

353

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

guarantees for coal and oil shale "synfuels" in the early 1980s when oil prices were high, passed a law

California at Davis, University of

354

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

: A Better and Coordinated Understanding of Water Resources Could Help Mitigate the Impacts of Potential Oil Shale Development (October 29, 2010), GAO-11-35, p. 70. 13. G. Mishra, W. Glassley, and S. Yeh

California at Davis, University of

355

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

Optimal Design of Sustainable Cellulosic Biofuel Supply Chains: Multiobjective Optimization Coupled of the sustainable biofuel supply chains. The proposed approach is illustrated through two case studies for the state of Illinois. Key words: planning, biofuel supply chain, sustainability, life cycle analysis, input- output

California at Davis, University of

356

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

of international crude oil price movement and limited domestic supplies of bio-fuel. The National Bio-fuel Policy-diesel plants and supply chains in their respective states. Although the nascent bio-diesel industry has beenRequired Report - public distribution Date: 6/15/2009 GAIN Report Number:IN9080 India BIOFUELS

California at Davis, University of

357

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

-duty markets for advanced electric-drive technologies such as plug-in hybrids and hydrogen fuel cell vehicles improvements in gasoline internal combustion engine vehicle (ICEV) and hybrid electric vehicle (HEV) technology electric vehicles (PHEVs) play a major role beyond 2025. · FCV success--Hydrogen fuel cell vehicles (FCVs

California at Davis, University of

358

SUSTAINABLE TRANSPORTATION ENERGY PATHWAYS A Research Summary for Decision Makers  

E-Print Network (OSTI)

, and plug-in hybrid electric vehicles versus conventional internal combustion engine vehicles. We first give of our alternative fuel / advanced vehicle pathways. Reducing greenhouse gas (GHG) emissions from. We then discuss how GHG emissions from electric vehicle (EV) fuel cycles are estimated, before

California at Davis, University of

359

Sources and Uses of Weather Information for Agricultural Decision Makers  

Science Conference Proceedings (OSTI)

Numerous studies have examined the importance of weather information to farmers and ranchers across the U.S. This study is focused on the kinds of weather information received by farmers and ranchers, the sources of that information, and its use ...

Kevin P. McNew; Harry P. Mapp; Claude E. Duchon; Earl S. Merritt

1991-04-01T23:59:59.000Z

360

Knowing fans, knowing music : an exploration of fan interaction on Twitter.  

E-Print Network (OSTI)

??In this thesis, I examine what "knowing music" means to participants in online social musicking activities, along with the role Twitter plays in this process.… (more)

McCollum, Nick

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

WEDNESDAY JANUARY 26 REGISTRATION & COFFEE [VOLVOFOAJN, RUNAN  

E-Print Network (OSTI)

emissions and then to harvest the algae as feedstock to our renewable energy gasification plant, so it can a Solena Group gasification process based on a feedstock of biomass, green wastes, and agricultural wastes plants) in our patented algae production process. This enables us to grow the algae based on the GHG

Almgren, Magnus

362

Measurement of airflow in residential furnaces  

E-Print Network (OSTI)

Barometric Pressure Fan Motor Volts Fan Motor Amps Fan MotorBarometric Pressure Fan Motor Volts Fan Motor Amps Fan MotorBarometric Pressure Fan Motor Volts Fan Motor Amps Fan Motor

Biermayer, Peter J.; Lutz, James; Lekov, Alex

2004-01-01T23:59:59.000Z

363

Variable Speed Fan Retrofits for Computer Room Air Conditioners  

Energy.gov (U.S. Department of Energy (DOE))

Case study describes various concepts for more cost-effective cooling solutions in data centers, while keeping in mind that the reliability of computing systems and their respective cooling systems is always a key criterion.

364

Advanced Energy-Efficient Filtration: Fan Filter Unit  

E-Print Network (OSTI)

8 5.3.1 FFU Electric Power and Airflowacross the unit. Total electric power demand. 5.2.1 Test5.3 Results 5.3.1 FFU Electric Power and Airflow Speed

Xu, Tengfang

2005-01-01T23:59:59.000Z

365

Active heat transfer enhancement in integrated fan heat sinks  

E-Print Network (OSTI)

Modern computer processors require significant cooling to achieve their full performance. The "efficiency" of heat sinks is also becoming more important: cooling of electronics consumes 1% of worldwide electricity use by ...

Staats, Wayne Lawrence

2012-01-01T23:59:59.000Z

366

Pomeron fan diagrams with an infrared cutoff and running coupling  

E-Print Network (OSTI)

By direct numerical calculations the influence of a physically relevant infrared cutoff and running coupling on the gluon density and structure function of a large nucleus is studied in the perturbative QCD approach. It is found that the infrared cutoff changes the solutions very little. Running of the coupling produces a bigger change, considerably lowering both the saturation momentum and values of the structure functions.

M. A. Braun

2003-08-29T23:59:59.000Z

367

A sequencing and fan-out mechanism for dataflow computing  

DOE Patents (OSTI)

A sequencing and data fanout mechanism is provided for a dataflow processor is activated by an input token which causes a sequence of operations to occur by initiating a first instruction to act on data contained within the token and then executing a sequential thread of instructions identified by either a repeat count and an offset within the token, or by an offset within each preceding instruction.

Grafe, V.G.; Hoch, J.E.

1991-12-31T23:59:59.000Z

368

Modelling and Validation of Three Dimensional Fan Blade 'Twist ...  

Science Conference Proceedings (OSTI)

Abstract Scope, The numerical results obtained from the finite element analysis of the twist and camber forming of a blade are presented. The manufacturing ...

369

Microsoft Word - defense_in_depth_fanning.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Engineering and Systems Analysis What is Defense in Depth? Defense in Depth is a safety philosophy that guides the design, construction, inspection, operation, and...

370

Feasibility Study: Ductless Hydronic Distribution Systems with Fan Coil Delivery  

SciTech Connect

The primary objectives of this study are to estimate potential energy savings relative to conventional ducted air distribution, and to identify equipment requirements, costs, and barriers with a focus on ductless hydronic delivery systems that utilize water-to-air terminal units in each zone. Results indicate that annual heating and cooling energy use can be reduced by up to 27% assuming replacement of the conventional 13 SEER heat pump and coil with a similarly rated air-to-water heat pump.

Springer, D.; Dakin, B.; Backman, C.

2012-07-01T23:59:59.000Z

371

"Housing Unit and Household","Households","With Fans","Households...  

U.S. Energy Information Administration (EIA) Indexed Site

LPG",5,3.8,75.6,10,2.7,2 "Wood",2,1.5,73.5,3.7,2.5,1.8 "Kerosene",0.7,0.3,47,0.8,2.3,1.1 "Solar","Q","Q","Q","Q","Q","Q" "OtherNone",0.6,0.1,21.6,0.3,2.1,0.5 "Natural Gas...

372

Fan-family conflict : an examination of inter-role conflict between sport fan and family roles.  

E-Print Network (OSTI)

??Ph. D. An individual's role set consists of a variety of different roles (Biddle, 1979; Madsen & Hammond, 2005). Parent, spouse, student, and even sports… (more)

Simmons, Jason M.

2011-01-01T23:59:59.000Z

373

Building Technologies Program  

NLE Websites -- All DOE Office Websites (Extended Search)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Supply Fan Motor Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

374

Towards an Assessment of Public Library Value: Statistics on the Policy Makers' Agenda  

Science Conference Proceedings (OSTI)

This paper presents methodology, early findings, possible applications of results and lessons learnt from the research study "Public libraries: value, trust and satisfaction". The study was conducted in Latvia as the part of the impact assessment plan ... Keywords: Information Ecology, Information Needs, Public Libraries, Satisfaction, Trust, Value

Kristine Paberza

2010-04-01T23:59:59.000Z

375

Making Future Change-Makers: Citizenship and Education in Bosnia-Herzegovina.  

E-Print Network (OSTI)

??With this thesis I not only seek to break the culture of silence that is characteristic among the peoples and citizens of Bosnia-Herzegovina, but they… (more)

Ajanovic, Fahreta

2012-01-01T23:59:59.000Z

376

Making Science Useful to Decision Makers: Climate Forecasts, Water Management, and Knowledge Networks  

Science Conference Proceedings (OSTI)

Moving from climate science to adaptive action is an immense challenge, especially in highly institutionalized sectors such as water resources. Knowledge networks are valuable strategies to put climate information to use. They overcome barriers ...

David L. Feldman; Helen M. Ingram

2009-10-01T23:59:59.000Z

377

L:\\PUBLICATIONS\\Projects - Active\\2005\\2005 Argonne ES&H\\PageMaker...  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Analysis EH DOE Office of Environment, Safety, and Health EMS Environmental Management System ES&H Environment, Safety, and Health ISM Integrated Safety Management OA DOE...

378

L:\\PUBLICATIONS\\Projects - Active\\2005\\2005 INL-ATR\\PageMaker...  

NLE Websites -- All DOE Office Websites (Extended Search)

and the Idaho Cleanup Project, under the DOE Headquarters Office of Environmental Management; a new prime contractor and contract for management of the INL; the transfer of the...

379

Women as Policy Makers: Evidence from a Randomized Policy Experiment in India  

E-Print Network (OSTI)

This data set uses political reservations for women in India to study the impact of women's leadership on policy decisions. Using a dataset we collected on 265 village councils in West Bengal and Rajasthan, we compare the ...

Raghabednra Chattopadhyay

2007-10-05T23:59:59.000Z

380

L:\\PUBLICATIONS\\Projects - Active\\2005\\2005 Sandia ES&H\\PageMaker...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

work performed primarily by subcontractors. OA focused primarily on implementation of ISM at the facility and activitytask levels. * NNSA, SSO, and SNL feedback and continuous...

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Effects of Restaurant Tax and Price Increases: Implications for Managers, Policy Makers, and Lobbyists.  

E-Print Network (OSTI)

??Legislation has been proposed in Kentucky that would authorize city legislative bodies to levy a tax on restaurant meals of no more than 3%, regardless… (more)

Han, Junghee

2013-01-01T23:59:59.000Z

382

L:\\PUBLICATIONS\\Projects - Active\\2005\\2005 Argonne ES&H\\PageMaker...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

... 17 Abbreviations Used in This Report AGHCF Alpha-Gamma Hot Cell Facility ANL Argonne National Laboratory APS Advanced Photon Source ASO Argonne...

383

Transportation Energy Futures: Key Opportunities and Tools for Decision Makers (Brochure)  

Science Conference Proceedings (OSTI)

The Transportation Energy Futures (TEF) project examines underexplored greenhouse gas-abatement and oil-savings opportunities by consolidating transportation energy knowledge, conducting advanced analysis, and exploring additional opportunities for sound strategic action. Led by NREL, in collaboration with Argonne National Laboratory, the project's primary goal is to provide analysis to accompany DOE-EERE's long-term transportation energy planning by addressing high-priority questions, informing domestic decisions about transportation energy strategies, priorities, and investments. Research and analysis were conducted with an eye toward short-term actions that support long-term energy goals The project looks beyond technology to examine each key question in the context of the marketplace, consumer behavior, industry capabilities, and infrastructure. This updated fact sheet includes a new section on initial project findings.

Not Available

2012-12-01T23:59:59.000Z

384

Summary for Policy Makers: Intergovernmental Panel on Climate Change Special Report Renewable Energy Sources (SRREN)  

SciTech Connect

The Working Group III Special Report on Renewable Energy Sources and Climate Change Mitigation (SRREN) presents an assessment of the literature on the scientific, technological, environmental, economic and social aspects of the contribution of six renewable energy (RE) sources to the mitigation of climate change. It is intended to provide policy relevant information to governments, intergovernmental processes and other interested parties. This Summary for Policymakers provides an overview of the SRREN, summarizing the essential findings. The SRREN consists of 11 chapters. Chapter 1 sets the context for RE and climate change; Chapters 2 through 7 provide information on six RE technologies, and Chapters 8 through 11 address integrative issues.

Arvizu, Dan; Bruckner, Thomas; Christensen, John; Devernay, Jean-Michel; Faaij , Andre; Fischedick, Manfred; Goldstein, Barry; Hansen, Gerrit; Huckerby , John; Jager-Waldau, Arnulf; Kadner, Susanne; Kammen, Daniel; Krey, Volker; Kumar, Arun; Lewis , Anthony; Lucon, Oswaldo; Matschoss, Patrick; Maurice, Lourdes; Mitchell , Catherine; Moomaw, William; Moreira, Jose; Nadai, Alain; Nilsson, Lars J.; Nyboer, John; Rahman, Atiq; Sathaye, Jayant; Sawin, Janet; Schaeffer, Roberto; Schei, Tormod; Schlomer, Steffen; Sims, Ralph; von Stechow, Christoph; Verbruggen, Aviel; Urama, Kevin; Wiser, Ryan; Yamba, Francis; Zwickel, Timm

2011-05-08T23:59:59.000Z

385

L:\\PUBLICATIONS\\Projects - Active\\2005\\2005 INL-ATR\\PageMaker...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2003 OA findings and recommended closure of an associated Noncompliance Tracking System (NTS) report. ID's review of the contractor's corrective action plans and completed actions...

386

Developing heritage : activist decision-makers and reproduced narratives in the Old City of Aleppo, Syria  

E-Print Network (OSTI)

Aleppo's rehabilitation project has received plaudits for its comprehensive pro-resident approach and an active stance to limit gentrification and touristification. As this objective goes against many of the structural and ...

Baird-Zars, Bernadette (Bernadette Virginia)

2010-01-01T23:59:59.000Z

387

MADmap: A Massively Parallel Maximum-Likelihood Cosmic Microwave Background Map-Maker  

SciTech Connect

MADmap is a software application used to produce maximum-likelihood images of the sky from time-ordered data which include correlated noise, such as those gathered by Cosmic Microwave Background (CMB) experiments. It works efficiently on platforms ranging from small workstations to the most massively parallel supercomputers. Map-making is a critical step in the analysis of all CMB data sets, and the maximum-likelihood approach is the most accurate and widely applicable algorithm; however, it is a computationally challenging task. This challenge will only increase with the next generation of ground-based, balloon-borne and satellite CMB polarization experiments. The faintness of the B-mode signal that these experiments seek to measure requires them to gather enormous data sets. MADmap is already being run on up to O(1011) time samples, O(108) pixels and O(104) cores, with ongoing work to scale to the next generation of data sets and supercomputers. We describe MADmap's algorithm based around a preconditioned conjugate gradient solver, fast Fourier transforms and sparse matrix operations. We highlight MADmap's ability to address problems typically encountered in the analysis of realistic CMB data sets and describe its application to simulations of the Planck and EBEX experiments. The massively parallel and distributed implementation is detailed and scaling complexities are given for the resources required. MADmap is capable of analysing the largest data sets now being collected on computing resources currently available, and we argue that, given Moore's Law, MADmap will be capable of reducing the most massive projected data sets.

Cantalupo, Christopher; Borrill, Julian; Jaffe, Andrew; Kisner, Theodore; Stompor, Radoslaw

2009-06-09T23:59:59.000Z

388

Laboratory Information Management Systems for Forensic Laboratories: A White Paper for Directors and Decision Makers  

Science Conference Proceedings (OSTI)

Modern, forensics laboratories need Laboratory Information Management Systems (LIMS) implementations that allow the lab to track evidentiary items through their examination lifecycle and also serve all pertinent laboratory personnel. The research presented here presents LIMS core requirements as viewed by respondents serving in different forensic laboratory capacities as well as different forensic laboratory environments. A product-development methodology was employed to evaluate the relative value of the key features that constitute a LIMS, in order to develop a set of relative values for these features and the specifics of their implementation. In addition to the results of the product development analysis, this paper also provides an extensive review of LIMS and provides an overview of the preparation and planning process for the successful upgrade or implementation of a LIMS. Analysis of the data indicate that the relative value of LIMS components are viewed differently depending upon respondents' job roles (i.e., evidence technicians, scientists, and lab management), as well as by laboratory size. Specifically, the data show that: (1) Evidence technicians place the most value on chain of evidence capabilities and on chain of custody tracking; (2) Scientists generally place greatest value on report writing and generation, and on tracking daughter evidence that develops during their analyses; (3) Lab. Managers place the greatest value on chain of custody, daughter evidence, and not surprisingly, management reporting capabilities; and (4) Lab size affects LIMS preference in that, while all labs place daughter evidence tracking, chain of custody, and management and analyst report generation as their top three priorities, the order of this prioritization is size dependent.

Anthony Hendrickson; Brian Mennecke; Kevin Scheibe; Anthony Townsend

2005-10-01T23:59:59.000Z

389

SIM Senior Policy Makers Dialogue Forum 5 6 No ember 2009 ...  

Science Conference Proceedings (OSTI)

... South Africa 5 Chainarong Director for Chemical Metrology and Thailand Panelists 2 5 Chainarong ... and Biometry NIMT Thailand Panelists 14 ...

2012-08-16T23:59:59.000Z

390

Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary  

DOE Green Energy (OSTI)

The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

Levi, M. P.; O'Grady, M. J.

1980-02-01T23:59:59.000Z

391

Procuring Solar Energy: A Guide for Federal Facility Decision Makers, September 2010  

DOE Green Energy (OSTI)

This guide presents an overview of the process for successfully planning for and installing solar technology on a federal site. It is specifically targeted to managers of federal buildings and sites, contracting officers, energy and sustainability officers, and regional procurement managers. The solar project process is outlined in a concise, easy-to-understand, step-by-step format. Information includes a brief overview of legislation and executive orders related to renewable energy and the compelling reasons for implementing a solar project on a federal site. It also includes how to assess a facility to identify the best solar installation site, project recommendations and considerations to help avoid unforeseen issues, and guidance on financing and contracting options. Case studies with descriptions of successful solar deployments across multiple agencies are presented. In addition, detailed information and sample documents for specific tasks are referenced with Web links or included in the appendixes. The guide concentrates on distributed solar generation and not large, centralized solar energy generation.

Stoltenberg, B.; Partyka, E.

2010-09-01T23:59:59.000Z

392

Empirical studies on software notices to inform policy makers and usability designers  

Science Conference Proceedings (OSTI)

We evaluate the usability of End User License Agreements (EULAs) of popular consumer programs. Results from an empirical evaluation of 50 popular programs show the lack of accessibility and readability of notices. Our data from a recent study with 64 ... Keywords: HCI, end user license agreement, legal issues, notice, privacy, security

Jens Grossklags; Nathan Good

2007-02-01T23:59:59.000Z

393

Views from the River Front: Rio Grande Decision Makers Rank Water Conservation Strategies  

E-Print Network (OSTI)

This publication details the results of a survey of elected city officials and water managers in the Rio Grande River Basin of Texas and New Mexico. The participants ranked water conservation strategies for their communities.

Silvy, Valeen; Lesikar, Bruce J.

2005-10-18T23:59:59.000Z

394

L:\\PUBLICATIONS\\Projects - Active\\2005\\2005 Sandia ES&H\\PageMaker...  

NLE Websites -- All DOE Office Websites (Extended Search)

NE DOE Office of Nuclear Energy, Science and Technology NNSA National Nuclear Security Administration OA DOE Office of Independent Oversight and Performance Assurance PEP...

395

2006 Draft Rulemaking Activities Data Sheets  

NLE Websites -- All DOE Office Websites (Extended Search)

2006 DRAFT RULEMAKING 2006 DRAFT RULEMAKING ACTIVITIES DATA SHEETS APPLIANCE STANDARDS BUILDING TECHNOLOGIES PROGRAM U. S. DEPARTMENT OF ENERGY October 2005 1 Table of Contents (alphabetical order) Product Rulemaking Page Air Conditioners and Heat Pumps less than 65 kBtu/hr, 3-Phase (Commercial) Standards 1 Automatic Ice Makers (Commercial) Standards 2 Battery Chargers and External Power Supplies Determination 3 Battery Chargers and External Power Supplies Test Procedure 4 Ceiling Fans and Ceiling Fan Light Kits Standards 5 Central Air Conditioners and Heat Pumps (Residential) Standards 9 Central Air Conditioners and Heat Pumps (Residential) Test Procedure 10 Certain Incandescent Reflector Lamps (ER/BR) Coverage 11 Clothes Dryers (Residential) Standards 12

396

2006 Draft Rulemaking Activities Data Sheets  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2006 DRAFT RULEMAKING 2006 DRAFT RULEMAKING ACTIVITIES DATA SHEETS APPLIANCE STANDARDS BUILDING TECHNOLOGIES PROGRAM U. S. DEPARTMENT OF ENERGY October 2005 1 Table of Contents (alphabetical order) Product Rulemaking Page Air Conditioners and Heat Pumps less than 65 kBtu/hr, 3-Phase (Commercial) Standards 1 Automatic Ice Makers (Commercial) Standards 2 Battery Chargers and External Power Supplies Determination 3 Battery Chargers and External Power Supplies Test Procedure 4 Ceiling Fans and Ceiling Fan Light Kits Standards 5 Central Air Conditioners and Heat Pumps (Residential) Standards 9 Central Air Conditioners and Heat Pumps (Residential) Test Procedure 10 Certain Incandescent Reflector Lamps (ER/BR) Coverage 11 Clothes Dryers (Residential) Standards 12

397

Model Predictive Control of HVAC Systems: Implementation and Testing at the University of California, Merced  

E-Print Network (OSTI)

fan speed (rpm)      N fan ,0 :    design fan speed (P fan :    fan power (kW)    m cw ,0 :    design water mass 

Haves, Phillip

2010-01-01T23:59:59.000Z

398

Coffee County, Georgia: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

°, -82.820974° °, -82.820974° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.5182285,"lon":-82.820974,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

399

REVIEW PLAN John Redmond Dam Reservoir, Coffee County, Kansas  

E-Print Network (OSTI)

............................................................................................................1 2. REVIEW MANAGEMENT ORGANIZATION (RMO) COORDINATION Report with Responses to HQ Comments and support for John Redmond Dam and Reservoir, Kansas. (6) CEWSL Statement (HQ Policy Compliance Review). (8) SWT-PE-P Memorandum 29 June 2009; Response to HQ Policy

US Army Corps of Engineers

400

Coffee County, Tennessee: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

°, -86.0529604° °, -86.0529604° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.4576849,"lon":-86.0529604,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Coffee County, Alabama: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

4751172°, -86.0121573° 4751172°, -86.0121573° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.4751172,"lon":-86.0121573,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

402

Tropical Forest Fragments Enhance Pollinator Activity in Nearby Coffee Crops  

E-Print Network (OSTI)

accounted for >90% of all floral visits in distant sites. The gradient from the riparian strip showed visitation rates by over 50% in distant sites (where Apis was almost the only pollinator). In near sites dependence on a single introduced pollinator. Exploring the economic links between forest preservation

Vermont, University of

403

Advanced Integrated Systems Technology Development  

E-Print Network (OSTI)

fan designs .of each of the four major fan designs Fans for local airof various fan, motor, inlet and outlet designs, and by

2013-01-01T23:59:59.000Z

404

Advanced Design and Commissioning Tools for Energy-Efficient Building Technologies  

E-Print Network (OSTI)

cooling spray pump (MWh) Fans (including cooling tower fancooling spray pump (MWh) Fans (including cooling tower fancooling spray pump (MWh) Fans (including cooling tower fan

Bauman, Fred; Webster, Tom; Zhang, Hui; Arens, Ed

2012-01-01T23:59:59.000Z

405

Development and evaluation of fully automated demand response in large facilities  

E-Print Network (OSTI)

flow, static pressure) Cooling tower, Pump (status,VFD) ZoneFans Chillers Pumps Cooling towers Fans Fans Chillers Figureand secondary pumps, cooling towers, and fans. One issue

Piette, Mary Ann; Sezgen, Osman; Watson, David S.; Motegi, Naoya; Shockman, Christine; ten Hope, Laurie

2004-01-01T23:59:59.000Z

406

Measurement and evaluation techniques for automated demand response demonstration  

E-Print Network (OSTI)

static pressure min. Cooling tower, Pump status/VFD, Zonesystem Fans Chillers Pumps Cooling towers Fans Fans Chillerssecondary pumps, cooling towers, and fans were considered as

Motegi, Naoya; Piette, Mary Ann; Watson, David S.; Sezgen, Osman; ten Hope, Laurie

2004-01-01T23:59:59.000Z

407

Energy Conservation Standards for Automatic Commercial Ice Makers: Public Meeting and Availability of the Preliminary Technical Support Document  

NLE Websites -- All DOE Office Websites (Extended Search)

VerDate Mar2010 16:35 Jan 23, 2012 VerDate Mar<15>2010 16:35 Jan 23, 2012 Jkt 226001 PO 00000 Frm 00005 Fmt 4702 Sfmt 4702 E:\FR\FM\24JAP1.SGM 24JAP1 srobinson on DSK4SPTVN1PROD with PROPOSALS 3404 Federal Register / Vol. 77, No. 15 / Tuesday, January 24, 2012 / Proposed Rules (5) Totaling the results in section 12(b)(4); (6) Subtracting the total in section 12(b)(5) from the total in section 12(b)(3); and (7) Multiplying the result in section 12(b)(6) by your share. Example: You have a 100 percent share in one basic unit with 10 acres of fresh peaches and 5 acres of processing peaches designated on your acreage report, with a 300 bushel per acre production guarantee for both fresh and processing peaches, and you select 100 percent of the price election of $15.50 per bushel for fresh peaches and $6.50 per bushel

408

The energy market is diversifying. In addition to traditional power sources, decision makers can choose among solar, wind, and  

E-Print Network (OSTI)

a collaborative, five-year effort led by NREL in partnership with the U.S. Depart- ment of Energy; Sandia National is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy

409

Claris FileMaker Pro 3.0 for Windows 95 and MacIntosh: With Disk, 1st edition  

Science Conference Proceedings (OSTI)

From the Publisher:Designed for business people who need to be up to speed on everyday applications for both Windows and Macintosh, the QuickTorials provide the ideal self-study solution. Unique design lies flat for easy use and includes step-by-step ...

Betsy Newberry

1996-09-01T23:59:59.000Z

410

THE AIR-QUALITY MODELING SYSTEM: A Critical Component Of The Scientific Toolbox For Policy-Maker  

E-Print Network (OSTI)

in the area of highest O3 concentrations, the other that VOCs were limiting, with NOx reductions having% VOC reduction 138 51 192 46 184 40 25% NOx reduction 180 54 194 45 180 39 O3 (25% VOC)b -17 9.3 -6.6 5) b Case with 25% VOC reduction minus base case c Case with 25% NOx reduction minus base case input

411

Communicating complexity and informing decision-makers : challenges in the data and computation of environmental benefits of renewable energy  

E-Print Network (OSTI)

This thesis contrasts the quantification of avoided emission benefits of renewable generation as determined by a marginal emissions analysis and the methodology specified by the Massachusetts Greenhouse Gas Policy and ...

Rached, Tarek

2008-01-01T23:59:59.000Z

412

Quantitative Comparison of Lidar Data and User-generated Three-dimensional Building Models From Google Building Maker.  

E-Print Network (OSTI)

??Volunteered geographic information (VGI) has received increased attention as a new paradigm for geographic information production, while light detection and ranging (LiDAR) data is widely… (more)

Liu, Yang

2012-01-01T23:59:59.000Z

413

Heterogeneous deep-sea fan reservoirs, Shackelford and Preston waterflood units, Spraberry Trend, West Texas  

Science Conference Proceedings (OSTI)

This book discusses the geological characterization of reservoir and production attributes of the Shackelford and Preston waterflood units, southeastern Midland County, West Texas. These two units, which are operated by Mobil Producing Texas and New Mexico, are part of the Permian Spraberry Trend. Conventional reserves in the Spraberry are estimated to be almost 60 million barrels of oil, and more than 4 billion barrels of unproduced mobile oil remain, making the Spraberry a prime target for extended conventional recovery from untapped or poorly drained reservoir compartments. The authors determine the stratigraphy of the formation, map sand distribution trends, and determine from cores and logs the extent and composition of facies that compose the principal reservoir units.

Tyler, N.; Gholston, J.C.

1989-01-01T23:59:59.000Z

414

Toward green systems for cleanrooms: Energy efficient fan-filter units  

E-Print Network (OSTI)

information to users and designers to make informed decisions such as selecting more energy efficient models; Market

Jeng, Ming-Shan; Xu, Tengfang; Lan, Chao-Ho

2004-01-01T23:59:59.000Z

415

Development of a Fan-Filter Unit Test Standard, Laboratory Validations, and its Applications across Industries  

E-Print Network (OSTI)

and Renewable Energy, Office of Building Technology, State, andand Renewable Energy, Office of Building Technology, State, and

Xu, Tengfang

2008-01-01T23:59:59.000Z

416

Parametric System Curves: Correlations Between Fan Pressure Rise and Flow for Large Commercial Buildings  

E-Print Network (OSTI)

to meet a varying space conditioning load. Thus, withoutexample, at a given space conditioning load, reducing supply

Sherman, Max

2010-01-01T23:59:59.000Z

417

2008-607-00 ISRP FAN1 Nutrient Enhancement Project 1 Narrative Preamble  

E-Print Network (OSTI)

to Idaho steelhead populations. A paired treatment/control approach will be utilized to evaluate streams, length at age, and survival from study streams to Lower Granite Dam. The focus of this project. Accordingly, collection of fish data will be simplified and require no infrastructure. #12;2008-607-00 ISRP

418

Active Noise Control of an Insulated Box Fan using Feedforward and Feedback Control.  

E-Print Network (OSTI)

??In recent years, the active noise control methods are more attractive in reducing unwanted noise. Salient features of active control methods over passive control methods… (more)

Murthy, Muddala

2010-01-01T23:59:59.000Z

419

Standard Methods of Characterizing Performance of Fan Filter Units, Version 3.0  

E-Print Network (OSTI)

differential, total electric power demand, and totalper minute (RPM). W t (Total Electric Power Demand):Total electric power input to operate the FFU at certain

Xu, Tengfang

2007-01-01T23:59:59.000Z

420

Peters and Fanning appear on NBC-5 report on Illinois nuclear...  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Safety Materials Disposition Decontamination & Decommissioning Nuclear Criticality Safety Nuclear Data Program Nuclear Waste Form Modeling Departments Engineering...

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

New Attacks on Randomized ECC Algorithms Zhijie Jerry Shi and Fan Zhang  

E-Print Network (OSTI)

decreases exponentially. With N power traces, the overall error rate in State 1 can be calculated as: 322 2 number of power traces and has a very high success rate. I. INTRODUCTION The arithmetic of large integer the automaton enters State 1 or 11, a random variable e is drawn. If the next bit is 1, only the transition

Shi, Zhijie Jerry

422

Memory Controller Policies for DRAM Power Management Xiaobo Fan Carla S. Ellis Alvin R. Lebeck  

E-Print Network (OSTI)

to transition back to active. Energy e ciency can be improved by placing the chips in a lower power state when spent in the current power state before a transition to a lower state is made. We refer management policies. #12;Power State Power Time Transition mW nS Active Pa = 300 tacc=60 Standby Ps = 180

Lebeck, Alvin R.

423

Memory Controller Policies for DRAM Power Management Xiaobo Fan Carla S. Ellis Alvin R. Lebeck  

E-Print Network (OSTI)

to transition back to active. Energy efficiency can be improved by placing the chips in a lower power state when spent in the current power state before a transition to a lower state is made. We refer management policies. #12; Power State Power Time Transition (mW) (nS) Active Pa = 300 tacc=60 Standby Ps

Lebeck, Alvin R.

424

Uranium-series comminution ages of continental sediments: Case study of a Pleistocene alluvial fan  

E-Print Network (OSTI)

and river transport. Uranium-Series Geochemistry 52, 533-using high- precision uranium isotopic measurements.B. , Turner, S.P. , 2008. Uranium-series isotopes in river

Lee, Victoria E.

2010-01-01T23:59:59.000Z

425

Performance model of a very high bypass ratio counter rotating turbo fan engine.  

E-Print Network (OSTI)

?? Nowadays Snecma focuses on new engine architectures in order to meet the future demands in civil aviation. One of these considered concepts is aircrafts… (more)

Perrin, Martin

2012-01-01T23:59:59.000Z

426

Active Noise Control of a Centrifugal Fan Mounted in a Mock Laptop Enclosure.  

E-Print Network (OSTI)

??Noise from information technology (IT) equipment is a significant problem in today's modern society. Active Noise Control (ANC) has shown promise in reducing the effect… (more)

Esplin, John J.

2012-01-01T23:59:59.000Z

427

Investigation of Micro Porosity Sintered wick in Vapor Chamber for Fan Less Design  

E-Print Network (OSTI)

Micro Porosity Sintered wick is made from metal injection molding processes, which provides a wick density with micro scale. It can keep more than 53 % working fluid inside the wick structure, and presents good pumping ability on working fluid transmission by fine infiltrated effect. Capillary pumping ability is the important factor in heat pipe design, and those general applications on wick structure are manufactured with groove type or screen type. Gravity affects capillary of these two types more than a sintered wick structure does, and mass heat transfer through vaporized working fluid determines the thermal performance of a vapor chamber. First of all, high density of porous wick supports high transmission ability of working fluid. The wick porosity is sintered in micro scale, which limits the bubble size while working fluid vaporizing on vapor section. Maximum heat transfer capacity increases dramatically as thermal resistance of wick decreases. This study on permeability design of wick structure is 0.5 - 0.7, especially permeability (R) = 0.5 can have the best performance, and its heat conductivity is 20 times to a heat pipe with diameter (Phi) = 10mm. Test data of this vapor chamber shows thermal performance increases over 33 %.

C. S. Yu; W. C. Wei; S. W. Kang

2008-01-07T23:59:59.000Z

428

The ETK model| Emotional, technology, and knowledge competency effects on global soccer fan satisfaction.  

E-Print Network (OSTI)

?? This study was designed to investigate emotional (E), technology (T), and knowledge (K) competencies of the Fédération Internationale de Football Association (FIFA); specifically how… (more)

Cardenas Cano, Miguel Angel

2012-01-01T23:59:59.000Z

429

"Please help the cause against loneliness" : the importance of being a Morrissey fan.  

E-Print Network (OSTI)

??In May 1983 The Smiths released their first 7’’ single “Hand in Glove”, which peaked in the UK charts at 124th place. Little did the… (more)

Flinterud, Guro

2007-01-01T23:59:59.000Z

430

Selling the sweatdrop : the translation of 'Japaneseness' in manga and anime fan fiction.  

E-Print Network (OSTI)

??The worldwide popularity of Japanese comics (manga) and cartoons (anime) is significantly dependent on the translation of these texts for local contexts, and a number… (more)

Leong, Jane Ying Yieng

2010-01-01T23:59:59.000Z

431

An Innovative Method for Dynamic Characterization of Fan Filter Unit Operation.  

E-Print Network (OSTI)

transformer, and additional accessories attached to the unit. 6.5 Ambient conditionstransformer when applicable. Total electric power demand can be measured and characterized for any operable condition -

Xu, Tengfang

2006-01-01T23:59:59.000Z

432

Analysis of Thermostat Design for Vertical Fan Coil Units Within Modern Window-Wall Condominium Suites.  

E-Print Network (OSTI)

??The aim for this research is to identify the issues with poor thermostat designs in a window-wall condominium suite during cooling season, and to investigate… (more)

Ruff, Shawn

2013-01-01T23:59:59.000Z

433

Economic Recovery of Oil Trapped at Fan Margins Using High Angle Wells and Multiple Hydraulic Fractures  

Science Conference Proceedings (OSTI)

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a propagating turbidite complex through the use of hydraulically-fractured horizontal or high-angle wells. The combination of a horizontal or high-angled well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thininterbedded layers and the well bore.

Mike L. Laue

1997-05-08T23:59:59.000Z

434

Economic Recovery of Oil Trapped at Fan Margins Using High Angle Wells and Multiple Hydraulic Fractures  

Science Conference Proceedings (OSTI)

This project attempts to demonstrate the effectivensss of exploiting thin-layered, low energy deposits at the distal margin of a propagating turbinite complex through u se of hydraulically fractgured horizontal of high-angle wells. TGhe combinaton of a horizontal or high-angle weoo and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore.

Mike L. Laue

1998-02-05T23:59:59.000Z

435

Economic Recovery of Oil Trapped at Fan Margins Using High Angle Wells and Multiple Hydraulic Fractures  

Science Conference Proceedings (OSTI)

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low energy deposits at the distal end of a protruding turbidite complex through use of hydraulically fractured horizontal of high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than conventional vertical wells while maintaining vertical communication between thin interbedded layers and the well bore.

Mike L. Laue

1998-05-29T23:59:59.000Z

436

Economic Recovery of Oil Trapped at Fan Margins Using High Angle Wells and Multiple Hydraulic Fractures  

Science Conference Proceedings (OSTI)

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a prograding turbidite complex through the use of hydraulically fractured horizontal or high-angle wells. The combination of a horizontal or high-angle well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thin interbedded layers and the wellbore.

Laue, M.L.

1999-11-01T23:59:59.000Z

437

82 Scientific AmericAn January 2010 The NexT 20 Years of  

E-Print Network (OSTI)

me- chanical fan yet is much smaller. Other innovators are crafting Stirling engine fans, still some

Robins, Gabriel

438

The impact of humidity standards on energy efficient cooling in california  

E-Print Network (OSTI)

Fan and Cooling Energy Climate Zone 9 E Fan Energy B CoolingFan and Cooling Energy Climate Zone 9 Fan Energy B Cooling43. Fan and Cooling Energy Climate Zone 12 B F a n Energy B

1996-01-01T23:59:59.000Z

439

Appliance Standards Program Schedule - CCE Overview and Update, presented at AHRI 2011 Annual Meeting, dated November 14, 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 14, 2011 November 14, 2011 AHRI Annual Meeting 2011 2 | Building Technologies Program & General Counsel's Office of Enforcement eere.energy.gov Agenda Enforcement Happenings 1 Certification Follow-Up 4 5 Rulemaking Schedules How to Submit Questions 6 2 Rulemaking Updates 3 Enforcement Overview 3 | Building Technologies Program & General Counsel's Office of Enforcement eere.energy.gov Product Stage Scheduled Issuance Fans, Blowers, and Fume Hoods Request for Information Issued Commercial/Industrial Pumps Coverage Determination Issued Walk-in Coolers and Freezers NOPR Fall/Winter 2011 Commercial Ice Makers Preliminary Analysis Winter 2011

440

Appliance Standards Program Schedule - CCE Overview and Update, presented at AHRI 2011 Annual Meeting, dated November 14, 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

November 14, 2011 November 14, 2011 AHRI Annual Meeting 2011 2 | Building Technologies Program & General Counsel's Office of Enforcement eere.energy.gov Agenda Enforcement Happenings 1 Certification Follow-Up 4 5 Rulemaking Schedules How to Submit Questions 6 2 Rulemaking Updates 3 Enforcement Overview 3 | Building Technologies Program & General Counsel's Office of Enforcement eere.energy.gov Product Stage Scheduled Issuance Fans, Blowers, and Fume Hoods Request for Information Issued Commercial/Industrial Pumps Coverage Determination Issued Walk-in Coolers and Freezers NOPR Fall/Winter 2011 Commercial Ice Makers Preliminary Analysis Winter 2011

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Environmental and social responsibility in the coffee industry : a case for Oaxaca, Mexico  

E-Print Network (OSTI)

>. Fair Trade USA Financial Statements December 31, 2010 andFair Trade USA Financial Statements December 31, 2010 and

Rimburg, Natalya

2012-01-01T23:59:59.000Z

442

Space and Place in Business Intelligence: A Case Study of Starbucks Coffee Company in Central Ohio.  

E-Print Network (OSTI)

??The role of space in the planning and development of retail networks has been evident throughout much of the 20th century during which a range… (more)

Rainey, John William

2012-01-01T23:59:59.000Z

443

Microsoft Word - Dorm Furnishings list 2009.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 BROOKHAVEN NATIONAL LABORATORY STAFF SERVICES DIVISION - HOUSING OFFICE On-Site Furnishings List Residences/Dormitory This is to give visitors to BNL a general idea of what is and is not to be found in the on site residences. Small electrical appliances such as irons and coffee pots are not supplied. No provision can be made for appliances, additional furniture or electrical equipment. All rooms are air conditioned and fully heated. Electric table fans are available on request. Telephones are available in all rooms. All rooms are for working visitors to the Laboratory. Please respect the rights of others by keeping noise levels down. Some non-smoking rooms are available upon request. There is no food or drug store on-site. The

444

Simulation of energy performance of underfloor air distribution (UFAD) systems  

E-Print Network (OSTI)

3. Impact of supply fan design static pressure for UFADdifferences in supply fan design static pressure. Pressuresterminal units. Supply fan design power increases by 32.8

2009-01-01T23:59:59.000Z

445

Reduced Worker Exposure and Improved Energy Efficiency in Industrial Fume-Hoods  

E-Print Network (OSTI)

on the two successful designs: a fan powered airvest with anhose. The fan powered airvest design with an electricalwith an improved design and appropriate fan selection. An

Gadgil, A.J.

2008-01-01T23:59:59.000Z

446

State-of-the-Art in Residential and Small Commercial Air Handler Performance  

E-Print Network (OSTI)

with PSC motors. New fan designs The prototype testingshowing different blade design and fan to housing clearancesequipment design (not putting large fans in small cabinets).

Walker, Iain S.

2005-01-01T23:59:59.000Z

447

Energy Efficiency Building Code for Commercial Buildings in Sri Lanka  

E-Print Network (OSTI)

Fan System Designfor specified areas. 3.3 Fan System Design Criteria 3.3.1for the combined fan system at design conditions. 3.3.4

2000-01-01T23:59:59.000Z

448

2001: An Airspace Odyssey SUMMARY PROCEEDINGS OF THE 2001 AIRPORT NOISE SYMPOSIUM AND AIRPORT AIR QUALITY SYMPOSIUM  

E-Print Network (OSTI)

the use of advanced fan blade design and low noise fan exitreduce compressor fan noise, and the design of the nacelle

Gosling, Geoffrey D.

2001-01-01T23:59:59.000Z

449

High-tech buildings - Market transformation project  

E-Print Network (OSTI)

systems’ design use different concepts for the fans and thesystem design utilizes multiple small fans to push airin older fan-filter units, and inefficient design and layout

Applications Team

2001-01-01T23:59:59.000Z

450

2.1E Supplement  

E-Print Network (OSTI)

load EFRAC Fraction of design fan energy at current airflowby the central system supply fan at design flow. It will beand exhaust fan electrical consumption at design conditions.

Winkelmann, F.C.

2010-01-01T23:59:59.000Z

451

Improving air handler efficiency in residential HVAC applications  

E-Print Network (OSTI)

of different blade design and fan to housing clearances forimprovements, such as fan blade and cabinet design are hardaerodynamic fan blade and housing design? ” To investigate

Walker, Iain S.; Mingee, Michael D.; Brenner, Douglas E.

2003-01-01T23:59:59.000Z

452

Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design  

E-Print Network (OSTI)

lighting, improved fan blade design with proper balance, andDesign Options .. 21 Ceiling Fans and10W [2]. A design option for ceiling fans in large, open

Desroches, Louis-Benoit

2012-01-01T23:59:59.000Z

453

Comparative guide to emerging diagnostic tools for large commercial HVAC systems  

E-Print Network (OSTI)

speed-corrected fan metrics for measured and design data tospeed- corrected fan metrics for measured and design data tocfm), and fan efficiency ratio (measured efficiency/design

Friedman, Hannah; Piette, Mary Ann

2001-01-01T23:59:59.000Z

454

Airflow design for cleanrooms and its economic implications  

E-Print Network (OSTI)

common designs as the following: Type I: Fan-tower withand Type III: Fan-filter unit. Airflow Design A successfulfrom fan operation. The airflow design specifications for

Xu, Tengfang

2002-01-01T23:59:59.000Z

455

Application of Target Value Design to Energy Efficiency Investments  

E-Print Network (OSTI)

the original basis of design, fan wall system, withoutreflect the single fan vane axial design for the aira unique AHU design using a ‘vane axial fan. ’ Following a

Lee, Hyun Woo

2012-01-01T23:59:59.000Z

456

Improving air handler efficiency in houses  

E-Print Network (OSTI)

of different blade design and fan to housing clearances forimprovements, such as fan blade and cabinet design are hardequipment design (not putting large fans in small cabinets).

Walker, Iain S.

2004-01-01T23:59:59.000Z

457

Enabling Energy-Efficient Approaches to Thermal Comfort Using Room Air Motion  

E-Print Network (OSTI)

that almost all the configuration with fan (except the twovelocity level 3 oscillating-fan configurations) performedto the configuration without fan. Air Quality Acceptance

Pasut, Wilmer; Arens, Edward; Zhang, Hui; Kaam, Soazig; Zhai, Yongchao

2013-01-01T23:59:59.000Z

458

John Widdicombe¿s contribution to respiratory physiology and cough: reminiscences  

E-Print Network (OSTI)

cough: reminiscences Kian Fan Chung 1* , Jay A Nadel 2 andthree separate pieces from Fan Chung, Jay Nadel and Giovanniof John. Appreciation from Fan Chung Early encounters with

Chung, Kian Fan; Nadel, Jay A; Fontana, Giovanni

2013-01-01T23:59:59.000Z

459

L:\PUBLICATIONS\Projects - Active\2005\2005 INL-ATR\PageMaker Files\2005 INL-ATR ES&H.pmd  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 5.0 CONCLUSIONS ........................................................................ 10 6.0 RATINGS ................................................................................... 11 APPENDIX A - SUPPLEMENTAL INFORMATION ......................... 12 APPENDIX B - SITE-SPECIFIC FINDINGS ..................................... 13 APPENDIX C - CORE FUNCTION IMPLEMENTATION (CORE FUNCTIONS #1-4) ........................................................ 14 APPENDIX D - FEEDBACK AND CONTINUOUS IMPROVEMENT (CORE FUNCTION #5) ................................. 27 APPENDIX E - ESSENTIAL SYSTEM FUNCTIONALITY .............. 42 APPENDIX F - MANAGEMENT OF SELECTED FOCUS AREAS.......................................................................... 52 Abbreviations Used in This Report

460

L:\PUBLICATIONS\Projects - Active\2005\2005 Sandia ES&H\PageMaker Files\2005 Sandia ES&H.pmd  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 4.0 SUMMARY ASSESSMENT .........................................................9 5.0 CONCLUSIONS ........................................................................ 13 6.0 RATINGS ................................................................................... 15 APPENDIX A - SUPPLEMENTAL INFORMATION ......................... 17 APPENDIX B - SITE-SPECIFIC FINDINGS ..................................... 19 Abbreviations Used in This Report ACRR Annular Core Research Reactor CBDPP Chronic Beryllium Disease Prevention Program CFR Code of Federal Regulations DOE U.S. Department of Energy DSA Documented Safety Analysis EMS Environmental Management System ES&H Environment, Safety, and Health FMOC Facilities Management and Operations Center GIF Gamma Irradiation Facility

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

L:\PUBLICATIONS\Projects - Active\2005\2005 Argonne ES&H\PageMaker files\2005 Argonne ES&H Vol I.pmd  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 5.0 CONCLUSIONS ........................................................................ 12 6.0 RATINGS ................................................................................... 14 APPENDIX A - SUPPLEMENTAL INFORMATION ......................... 15 APPENDIX B - SITE-SPECIFIC FINDINGS ..................................... 17 Abbreviations Used in This Report AGHCF Alpha-Gamma Hot Cell Facility ANL Argonne National Laboratory APS Advanced Photon Source ASO Argonne Site Office CFR Code of Federal Regulations DOE U.S. Department of Energy DSA Documented Safety Analysis EH DOE Office of Environment, Safety, and Health EMS Environmental Management System ES&H Environment, Safety, and Health ISM Integrated Safety Management OA DOE Office of Independent Oversight and Performance Assurance

462

Market assessment for active solar heating and cooling products. Category B: A survey of decision makers in the HVAC market place. Survey instruments  

DOE Green Energy (OSTI)

Telephone screener questionnaires and mail-out questionnaires for marketing surveys for solar heating and cooling equipment are presented. Questionnaires are included for the residential segment, industrial segment, HVAC professionals segment, builder/developer segment, and the commercial segment. No results are reported. (WHK)

Lilien, G. L.; Johnston, P. E.

1980-09-01T23:59:59.000Z

463

Managing for Biodiversity: Emerging Ideas for the Electric Utility Industry: Environmental Management: An International Journal for Decision Makers, Scientists, and Environmental Auditors - Volume 20, Number 6  

Science Conference Proceedings (OSTI)

It has been concluded that protecting global biodiversity requires the cooperation of all entities. The papers in this special issue illustrate how the government and private sector needs to work together to address varied biodiversity issues. These 24 peer-reviewed accepted papers, representing the majority of the presentations, were given at a conference held in Williamsburg, Virginia during March 19-20, 1996. The conference focused on: identifying and understanding biodiversity issues for electric uti...

1999-07-03T23:59:59.000Z

464

Interactions with a Weather-Sensitive Decision Maker: A Case Study Incorporating ENSO Information into a Strategy for Purchasing Natural Gas  

Science Conference Proceedings (OSTI)

During the 1997/98 El Niño event, a Northern Illinois University (NIU) faculty member and a group of undergraduate meteorology students interacted with the university's heating plant manager to determine whether climate information and forecast ...

David Changnon; Tamara Creech; Nathan Marsili; William Murrell; Michael Saxinger

1999-06-01T23:59:59.000Z

465

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

E-Print Network (OSTI)

based methods of fault detection and diagnosis (FDD).Component-level FDD, which is the subject of the work

Xu, Peng; Haves, Philip

2002-01-01T23:59:59.000Z

466

Field Study of Exhaust Fans for Mitigating Indoor Air Quality Problems: Final Report to Bonneville Power Administration  

E-Print Network (OSTI)

terrain class (1-5)[dflt=3J";TCL 'Input terrain class atsite. IF TCL=0 THEN TCL=3 INPUT "Are you going to use wind data froM the

Grimsrud, David T.

2009-01-01T23:59:59.000Z

467

Final Project Report: Self-Correcting Controls for VAV System Faults Filter/Fan/Coil and VAV Box Sections  

SciTech Connect

This report addresses original research by the Pacific Northwest National Laboratory for the California Institute for Energy and Environment on self-correcting controls for variable-air-volume (VAV) heating, ventilating and air-conditioning systems and focuses specifically on air handling and VAV box components of the air side of the system. A complete set of faults for these components was compiled and a fault mode analysis performed to understand the detectable symptoms of the faults and the chain of causation. A set of 26 algorithms was developed to facilitate the automatic correction of these faults in typical commercial VAV systems. These algorithms include training tests that are used during commissioning to develop models of normal system operation, passive diagnostics used to detect the symptoms of faults, proactive diagnostics used to diagnose the cause of a fault, and finally fault correction algorithms. Ten of the twenty six algorithms were implemented in a prototype software package that interfaces with a test bed facility at PNNL's Richland, WA, laboratory. Measurement bias faults were instigated in the supply-air temperature sensor and the supply-air flow meter to test the algorithms developed. The algorithms as implemented in the laboratory software correctly detected, diagnosed and corrected these faults. Finally, an economic and impact assessment was performed for the State of California for deployment of self-correcting controls. Assuming 15% HVAC energy savings and a modeled deployment profile, 3.1-5.8 TBu of energy savings are possible by year 15.

Brambley, Michael R.; Fernandez, Nicholas; Wang, Weimin; Cort, Katherine A.; Cho, Heejin; Ngo, Hung; Goddard, James K.

2011-05-01T23:59:59.000Z

468

Supporting Concurrent Task Deployment Wireless Sensor Networks* S. Guo, C. Fan, and T.D.C. Little  

E-Print Network (OSTI)

-specialist and for it to subsequently discover and associate with its corresponding HVAC control loop. We claim that this involves are required or when the mission of the system changes. We consider a technique that is intended to support multiple concurrent missions by the system by exploiting available resources of the sensor network

Little, Thomas

469

The sedimentological and geotechnical characteristics of the lower continental slope and rise of the Mississippi Fan fold belt  

E-Print Network (OSTI)

The study is based on geological and geotechnical laboratory testing data of 70 three inch diameter piston cores. Concentration is along the Sigsbee Escarpment in a grid area between 90? and 91?W and 26.7? and 27.3?N. Water depth ranges from 1,200 meters below sea level to 2,500 meters below sea level. All data were used to characterize the seafloor processes that deposited these sediments. The Sigsbee Escarpment represents a complex topographic and geologic feature involving faults, slumps and steep slopes. Most of the study area is covered by hemipelagic Holocene sediments in 0.05 to 2.9 m thickness, greatest thickness being in bathymetric lows indicating that Holocene sediments are eroded at the bathymetric highs and transported down the slope. The underlying Pleistocene sediments are mostly laminated clays in the southwestern part of the study area, indicating no mass wasting. Hemipelagic sedimentation in quiet sea bottom environment was dominant throughout the accumulation of the unit. Several generations of slumps have occurred in the northeastern part of the Sigsbee Escarpment during the Pleistocene showing that this part of the study area is an area where active mass wasting and down slope processes dominate.

Ramazanova, Rahila

2001-01-01T23:59:59.000Z

470

Field Study of Exhaust Fans for Mitigating Indoor Air Quality Problems: Final Report to Bonneville Power Administration  

E-Print Network (OSTI)

unvented combustion was Wood combustion present in housescombustion engines are a major source of the outdoor concentrations observed while wood,

Grimsrud, David T.

2009-01-01T23:59:59.000Z

471

Comparison of heat sink and fan combinations and thermal electric coolers for use in the Mars Gravity Biosatellite  

E-Print Network (OSTI)

An experiment was conducted to help compare possible cooling methods for the payload module of the Mars Gravity Biosatellite. The Satellite will be launched into space with 15 mice on board and rotated to create a 0.38g ...

Parness, Aaron J. (Aaron Joseph), 1981-

2004-01-01T23:59:59.000Z

472

Optimal Design of Transonic Fan Blade Leading Edge Shape Using CFD and Simultaneous Perturbation Stochastic Approximation Method  

E-Print Network (OSTI)

Simultaneous Perturbation Stochastic Approximation method has attracted considerable application in many different areas such as statistical parameter estimation, feedback control, simulation-based optimization, signal & ...

Xing, X.Q.

473

Petrology, geochronology and provenance of the Laingsburg and Tanqua Karoo submarine fan systems, Ecca Group, South Africa.  

E-Print Network (OSTI)

??The integration of whole-rock chemistry, heavy mineral chemistry, detrital zircon morphology and age dating has enabled high-resolution characterization of the Permian Laingsburg and Tanqua submarine… (more)

Nguema Mve, Oliver Patrice

2005-01-01T23:59:59.000Z

474

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

E-Print Network (OSTI)

and diagnosis for cooling towers. ASHRAE Trans. , vol.107,of faults in the cooling tower circuit of a central chilled

Xu, Peng; Haves, Philip

2002-01-01T23:59:59.000Z

475

Field Study of Exhaust Fans for Mitigating Indoor Air Quality Problems: Final Report to Bonneville Power Administration  

E-Print Network (OSTI)

to mount the passive samplers in a house. designed describedhouses screened for study List of Figures A.l A.2 A.3 A.4 PassivePassive Sampler Sampler Girman/Allen Girman/Allen Wednesday 16 November Test house (

Grimsrud, David T.

2009-01-01T23:59:59.000Z

476

CBE EnergyPlus Modeling Methods for UFAD Systems  

E-Print Network (OSTI)

For these studies the fan design volume (and fan size) willall use the same AHU Fan design static pressure (FSP). ThisMethods for UFAD Systems Fan design efficiencies EnergyPlus

Webster, Tom; Bauman, Fred; Lee, Kwang Ho; Schiavon, Stefano; Daly, Alan; Hoyt, Tyler

2012-01-01T23:59:59.000Z

477

VAV Reheat Versus Active Chilled Beams and DOAS  

E-Print Network (OSTI)

and fan power. Table 1. Design Fan Power CFM CFM/ft2 Ext.has about 40% higher fan power at design conditions than the10 shows, the VAVR Design uses less fan power than the ACB+

Stein, Jeff; Taylor, Steven

2013-01-01T23:59:59.000Z

478

INTERACTION OF A SOLAR SPACE HEATING SYSTEM WITH THE THERMAL BEHAVIOR OF A BUILDING  

E-Print Network (OSTI)

Pant Rfict Fan coil heat exchanger effectiveness. c min Fanis modeled as a fan-coil heat exchanger. The fan coil outputsystem with a fan-coil heat exchanger sized for a solar

Vilmer, Christian

2013-01-01T23:59:59.000Z

479

--No Title--  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

revision is for OGE fans 2 and 3. Perform the same excavation for the Air Monitor (AM) Fan 1 and 2. Cut, Remove and Replace OGE Fan 2 & 3 foundation and Replace AM Fan 1 & 2...

480

U.S. Building-Sector Energy Efficiency Potential  

E-Print Network (OSTI)

More operation improved fan and pump design; Reduced standbymotors; improved fan and pump design; Reduced standby power

Brown, Rich

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fans coffee makers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Comparison of emerging diagnostic tools for large commercial HVAC systems  

E-Print Network (OSTI)

contracting, design decision information, fan benchmarking,Fan Systems (UCB Tools), University of California at Berkeley, Center for Environmental Design

Friedman, Hannah; Piette, Mary Ann

2001-01-01T23:59:59.000Z

482

Thermal decay in underfloor air distribution (UFAD) systems: Fundamentals and influence on system performance  

E-Print Network (OSTI)

supply temperature AHU fan design static pressure AHU fanshown in Table 1, AHU fan design static pressure for series

Lee, Kwang Ho; Schiavon, Stefano; Bauman, Fred; Webster, Tom

2012-01-01T23:59:59.000Z

483

Engineering of Olfactory Receptor OlfCc1 for Directed Ligand Sensitivity  

E-Print Network (OSTI)

to the more popular “fan” designs that permit many morewells per chip because fan designs create an artificial size

Berke, Allison Paige

2013-01-01T23:59:59.000Z

484

Calendar Year 2008 Program Benefits for ENERGY STAR Labeled Products  

E-Print Network (OSTI)

fans CFL Commercial dishwasher Commercial fryers Commercialwashers Residential dishwashers Residential light fixturesCeiling Fans • Commercial Dishwashers • Commercial Hot Food

Homan, GregoryK

2010-01-01T23:59:59.000Z

485

Secure Smart Environments: Security Requirements, Challenges and Experiences in Pervasive Computing  

E-Print Network (OSTI)

INTRODUCTION In an ideal pervasive computing environment, a large number of connected smart devices are deployed to collaboratively provision seamless services to users. Pervasive computing is enabled by various advanced technologies, particularly wireless technologies and the Internet. It has become a trend for our future lives. A pervasive computing environment can be extremely heterogeneous. We can imagine how many different devices are involved in a smart home: TVs, phones, cameras, coffee makers, or even books and bookshelves. Since these devices are smart and communicate with each other mainly via wireless links, security must be ensured. Otherwise, the smart devices deployed around us would come back to hunt us and the result would be catastrophic. In this abstract we briefly discuss some important security issues in pervasive computing. II. SECURITY CHALLENGES AND REQUIREMENTS IN PERVASIVE COMPUTING:THE BIG PICTURE Due to the very high heterogeneity and complexity of pervasi

Jun Wang; Yaling Yang; William Yurcik

2005-01-01T23:59:59.000Z

486

Frontal lobe volume, function, and beta-amyloid pathology in a canine model of aging  

E-Print Network (OSTI)

with a single red coffee jar lid in one of three spatiala second identical coffee jar lid was presented on phase twothird identical coffee jar lid was presented simultaneously

2004-01-01T23:59:59.000Z

487

Safety Day at Brookhaven National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

simultaneous excellence in science, operations, and safety, we make Brookhaven the provider of choice for world-class scientific discovery. photo of coffee Coffee &...

488

CECM: Annual Summer Meeting 2009 Program  

E-Print Network (OSTI)

Jul 24, 2009 ... Research · CECM Research Posters · Symbolic Computation ... Dynamic Medical Imaging. 10:30am. Poster setup. Coffee break (coffee, tea, ...

489

8:00-8:30 Registration. Coffee 8:30-9:50 Opening Session. Chair E. Elias, Technion. Greetings by  

E-Print Network (OSTI)

Research) - Hiroshima & Nagasaki bombings: the radio-epidemiological aspect 10:50- 11:10 Y. Socol (AFNA. Greetings by representatives of Technion, Mechanical Engineering Faculty, Israel Atomic Energy Commission 9 nuclear threat 11:50-12:15 I. Levanon (Israel Atomic Energy Commission - IAEC)­ Threat from malicious acts

Rimon, Elon

490

Final Report Independent Verification Survey of the High Flux Beam Reactor, Building 802 Fan House Brookhaven National Laboratory Upton, New York  

SciTech Connect

The Separations Process Research Unit (SPRU) complex located on the Knolls Atomic Power Laboratory (KAPL) site in Niskayuna, New York, was constructed in the late 1940s to research the chemical separation of plutonium and uranium (Figure A-1). SPRU operated as a laboratory scale research facility between February 1950 and October 1953. The research activities ceased following the successful development of the reduction oxidation and plutonium/uranium extraction processes. The oxidation and extraction processes were subsequently developed for large scale use by the Hanford and Savannah River sites (aRc 2008a). Decommissioning of the SPRU facilities began in October 1953 and continued through the 1990s.

Evan Harpeneau

2011-06-24T23:59:59.000Z

491

Optically Stimulated Luminescence Dating of Gravelly Alluvial Fan Deposits: Links Between Climate and Geomorphic Response in the Lost River Range, Idaho.  

E-Print Network (OSTI)

??Deciphering the role and importance of climate vs. tectonism in controlling rates and processes of erosion in mountainous regions remains an area of active research… (more)

Kearney Kenworthy, Megan

2011-01-01T23:59:59.000Z

492

Study of the effects of ambient conditions upon the performance of fan powered, infrared, natural gas burners. Quarterly report, April 1, 1996 - June 30, 1996  

DOE Green Energy (OSTI)

A porous radiant burner testing facility consisting of a commercial deep-fat fryer, an FTIR based spectral radiance measurement system, a set of flue gas analysis components, and a fuel gas mixing station was constructed. The measurement capabilities of the system were tested using methane and the test results were found to be consistent with the literature. Following the validation of the measurement system, various gas mixtures were tested to study the effect of gas compositions have on burner performance. Results indicated that the emissions vary with fuel gas composition and air/fuel ratio. The maximum radiant efficiency of the burner was obtained close to air/fuel ratio of 1.

Bai, T.; Yeboah, Y.D.; Sampath, R.

1996-07-01T23:59:59.000Z

493

Sequencing and fan-out mechanism for causing a set of at least two sequential instructions to be performed in a dataflow processing computer  

DOE Patents (OSTI)

A sequencing and data fanout mechanism is provided for a dataflow processor is activated by an input token which causes a sequence of operations to occur by initiating a first instruction to act on data contained within the token and then executing a sequential thread of instructions identified by either a repeat count and an offset within the token, or by an offset within each preceding instruction.

Grafe, Victor G. (Corrales, NM); Hoch, James E. (Albuquerque, NM)

1993-01-01T23:59:59.000Z

494

Emissions of PCDD/Fs from municipal solid waste incinerators in China Yuwen Ni, Haijun Zhang, Su Fan, Xueping Zhang, Qing Zhang, Jiping Chen *  

E-Print Network (OSTI)

s t r a c t Gas emission of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD.5% of the total production of the world (Zhang and Zhu, 2006). The lack of landfill sites for the wastes has operated in China (Yan et al., 2006). However, until now there was a lack of detailed information

Columbia University

495

Correlation of turbulent burning velocities of ethanol-air, measured in a fan-stirred bomb up to 1.2 MPa  

SciTech Connect

The turbulent burning velocity is defined by the mass rate of burning and this also requires that the associated flame surface area should be defined. Previous measurements of the radial distribution of the mean reaction progress variable in turbulent explosion flames provide a basis for definitions of such surface areas for turbulent burning velocities. These inter-relationships. in general, are different from those for burner flames. Burning velocities are presented for a spherical flame surface, at which the mass of unburned gas inside it is equal to the mass of burned gas outside it. These can readily be transformed to burning velocities based on other surfaces. The measurements of the turbulent burning velocities presented are the mean from five different explosions, all under the same conditions. These cover a wide range of equivalence ratios, pressures and rms turbulent velocities for ethanol-air mixtures. Two techniques are employed, one based on measurements of high speed schlieren images, the other on pressure transducer measurements. There is good agreement between turbulent burning velocities measured by the two techniques. All the measurement are generalised in plots of burning velocity normalised by the effective unburned gas rms velocity as a function of the Karlovitz stretch factor for different strain rate Markstein numbers. For a given value of this stretch factor a decrease in Markstein number increases the normalised burning velocity. Comparisons are made with the findings of other workers. (author)

Bradley, D.; Lawes, M.; Mansour, M.S. [School of Mechanical Engineering, University of Leeds (United Kingdom)

2011-01-15T23:59:59.000Z

496

PROGRAMME AT A GLANCE 4th AMMA international Conference 2 6 July 2012, ICC, Toulouse, France  

E-Print Network (OSTI)

Monsoon Predictability African Monsoon System 9A Climate and Health 9B Monsoon system: Land surface models 9C Monsoon system: Ocean 10:40 Coffee break Coffee break Coffee break 10:30 Coffee (11) 2A Vulnerability and adaptation I : A multi sector perspective 2B Monsoon system: Climate I

497

registration form - TMS  

Science Conference Proceedings (OSTI)

$620 .............................................$695. (Includes technical sessions, workshops, coffee breaks, receptions, banquet and proceedings CD-ROM). ? Attendee ...

498

Impact of Large Scale Energy Efficiency Programs On Consumer Tariffs and Utility Finances in India  

E-Print Network (OSTI)

Cooling AC Fans Water Heating Solar Water Heater It shouldSpace Cooling Fans Water Heating Solar Water Heater The dataFans Space Cooling Water Heating Solar Water Heater Consumer

Abhyankar, Nikit

2011-01-01T23:59:59.000Z

499

Labs21 sustainable design programming checklist version 1.0  

E-Print Network (OSTI)

for all ventilation fans at design conditions divided byof fan and pump energy required to achieve the design towerdivided by the total design flow of all the fans. Objective:

Mathew, Paul; Greenberg, Steve

2005-01-01T23:59:59.000Z

500

Labs21 Laboratory Modeling Guidelines using ASHRAE 90.1-1999  

E-Print Network (OSTI)

with fixed design airflow the operating fan horsepower islaboratory fan systems and promote more efficient designs.fan systems. Adjustments for components that are only in the proposed design,

2008-01-01T23:59:59.000Z