Sample records for failed color rendering

  1. An Investigation into the Perception of Color under LED White Composite Spectra with Modulated Color Rendering

    E-Print Network [OSTI]

    O'Reilly, Una-May

    emitting diodes, LEDs. We examined seven LED white composite spectra with different color rendering of a pilot study that evaluates the perceptual impact of modulation of color rendering using multi-chip light

  2. Color-converting combinations of nanocrystal emitters for warm-white light generation with high color rendering index

    E-Print Network [OSTI]

    Demir, Hilmi Volkan

    color rendering index Sedat Nizamoglu, Gulis Zengin, and Hilmi Volkan Demira Department of Electrical 2008 Warm-white light emitting diodes with high color rendering indices are required for the widespreadSe/ZnS core-shell nanocrystals hybridized on InGaN/GaN LEDs for high color rendering index. Three sets

  3. Rendering

    E-Print Network [OSTI]

    Hansen, Charles

    2014-01-01T23:59:59.000Z

    1/1 Memory GB per node render nodes Figure 7: Total memory1C 3C 4C 5C 6C 7C 6C+LB FPS render cores Figure 8: Displayusing varying numbers of render cores to render a trivial

  4. Psychophysical evaluations of modulated color rendering for energy performance of LED-based architectural lighting

    E-Print Network [OSTI]

    Thompson, Maria do Rosário

    2007-01-01T23:59:59.000Z

    This thesis is focused on the visual perception evaluation of colors within an environment of a highly automated lighting control strategy. Digitally controlled lighting systems equipped with light emitting diodes, LEDs, ...

  5. A Computer Graphic System for Rendering Gonio-Apparent Colors Gary W. Meyer, Harold B. Westlund, Peter A. Walker, and Joseph P. Wingard*

    E-Print Network [OSTI]

    Meyer, Gary

    to define a BRDF from existing computer graphic reflection models and standard appearance measurements for a standard glossmeter, the virtual glossmeter subdivides this aperture and evaluates the computer graphicsA Computer Graphic System for Rendering Gonio-Apparent Colors Gary W. Meyer, Harold B. Westlund

  6. Bicolor Mn-doped CuInS{sub 2}/ZnS core/shell nanocrystals for white light-emitting diode with high color rendering index

    SciTech Connect (OSTI)

    Huang, Bo; Dai, Qian; Zhang, Huichao; Liao, Chen; Cui, Yiping; Zhang, Jiayu, E-mail: jyzhang@seu.edu.cn [Advanced Photonic Center, Southeast University, Nanjing 210096 (China); Zhuo, Ningze; Jiang, Qingsong; Shi, Fenghua; Wang, Haibo [Research Institute of Electric Light Source Materials, Nanjing University of Technology, Nanjing 210015 (China)

    2014-09-07T23:59:59.000Z

    We synthesized bicolor Mn-doped CuInS{sub 2} (CIS)/ZnS core/shell nanocrystals (NCs), in which Mn{sup 2+} ions and the CIS core were separated with a ZnS layer, and both Mn{sup 2+} ions and CIS cores could emit simultaneously. Transmission electron microscopy and powder X-ray diffraction measurements indicated the epitaxial growth of ZnS shell on the CuInS{sub 2} core, and electron paramagnetic resonance spectrum indicated that Mn{sup 2+} ions were on the lattice points of ZnS shell. By integrating these bicolor NCs with commercial InGaN-based blue-emitting diodes, tricolor white light-emitting diodes with color rendering index of 83 were obtained.

  7. Interactive crayon rendering for animation

    E-Print Network [OSTI]

    Halstead, Howard John IV

    2006-04-12T23:59:59.000Z

    This thesis describes the design and implementation of an interactive, nonphotorealistic rendering system for three-dimensional computer animation. The system provides a two-dimensional interface for coloring successive frames of animation using a...

  8. RenderAnts: Interactive REYES Rendering on GPUs Minmin Gong

    E-Print Network [OSTI]

    Zhou, Kun

    RenderAnts: Interactive REYES Rendering on GPUs Kun Zhou Qiming Hou Zhong Ren Minmin Gong Xin Sun Baining Guo Zhejiang University Tsinghua University Microsoft Research Asia Abstract We present RenderAnts, the first system that enables interac- tive REYES rendering on GPUs. Taking RenderMan scenes and shaders

  9. RenderAnts: Interactive Reyes Rendering on GPUs Minmin Gong

    E-Print Network [OSTI]

    Zhou, Kun

    RenderAnts: Interactive Reyes Rendering on GPUs Kun Zhou Qiming Hou Zhong Ren Minmin Gong Xin Sun Baining Guo Zhejiang University Tsinghua University Microsoft Research Asia Abstract We present RenderAnts, the first system that enables interactive Reyes rendering on GPUs. Taking RenderMan scenes and shaders

  10. Per-pixel Opacity Modulation for Feature Enhancement in Volume Rendering

    E-Print Network [OSTI]

    Strasbourg, Université de

    1 Per-pixel Opacity Modulation for Feature Enhancement in Volume Rendering Stéphane Marchesin Abstract-- Classical direct volume rendering techniques accu- mulate color and opacity contributions using the standard volume rendering equation approximated by alpha blending. However, such standard rendering

  11. Rendering Optical Effects Based on Spectra Representation in Complex Scenes

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Rendering Optical Effects Based on Spectra Representation in Complex Scenes Weiming Dong Project ALICE, INRIA Lorraine/Loria, France Weiming.Dong@loria.fr Abstract. Rendering the structural color sensitive phenomena. Achieving the rendering of complex scenes with both the full spectra and RGB light

  12. Bright three-band white light generated from CdSe/ZnSe quantum dot-assisted Sr{sub 3}SiO{sub 5}:Ce{sup 3+},Li{sup +}-based white light-emitting diode with high color rendering index

    SciTech Connect (OSTI)

    Jang, Ho Seong; Kwon, Byoung-Hwa; Jeon, Duk Young [Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 373-1, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Yang, Heesun [Department of Materials Science and Engineering, Hongik University, 72-1, Sangsu-dong, Mapo-gu, Seoul 121-791 (Korea, Republic of)

    2009-10-19T23:59:59.000Z

    In this study, bright three-band white light was generated from the CdSe/ZnSe quantum dot (QD)-assisted Sr{sub 3}SiO{sub 5}:Ce{sup 3+},Li{sup +}-based white light-emitting diode (WLED). The CdSe/ZnSe core/shell structure was confirmed by energy dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy. The CdSe/ZnSe QDs showed high quantum efficiency (79%) and contributed to the high luminous efficiency ({eta}{sub L}) of the fabricated WLED. The WLED showed bright natural white with excellent color rendering property ({eta}{sub L}=26.8 lm/W, color temperature=6140 K, and color rendering index=85) and high stability against the increase in forward bias currents from 20 to 70 mA.

  13. Topology-controlled volume rendering

    E-Print Network [OSTI]

    Weber, Gunther H; Dillard, Scott E; Carr, Hamish; Pascucci, Valerio; Hamann, Bernd

    2007-01-01T23:59:59.000Z

    type. Even when volume render- ing is applied to nonmedicalin graphics hardware. We render tubes between saddles and

  14. Sandia National Laboratories: color rendering index

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unfortunately, red emitters that satisfy all criteria for use in solid-state lighting (SSL) applications are ... Last Updated: May 23, 2013 Go To Top Exceptional service in...

  15. Importance Driven Rendering Using Importance Information in the Rendering Process

    E-Print Network [OSTI]

    Schumann, Heidrun

    Importance Driven Rendering ­ Using Importance Information in the Rendering Process R. Schultz describes the concept of using importance in- formation in the rendering process. Doing so, we can adapt the rendering time and image quality to the requirements of a user. For that, we discuss two problems

  16. CUDACUDA based Rendering of 3Dbased Rendering of 3DCUDACUDA based Rendering of 3Dbased Rendering of 3DCUDACUDA--based Rendering of 3Dbased Rendering of 3D Minkowski SumsMinkowski Sums

    E-Print Network [OSTI]

    California at Berkeley, University of

    CUDACUDA based Rendering of 3Dbased Rendering of 3DCUDACUDA based Rendering of 3Dbased Rendering of 3DCUDACUDA--based Rendering of 3Dbased Rendering of 3D Minkowski SumsMinkowski Sums CUDACUDA--based Rendering of 3Dbased Rendering of 3D Minkowski SumsMinkowski Sums CS267 Projectj Wei Li #12;Background

  17. Interactive crayon rendering for animation 

    E-Print Network [OSTI]

    Halstead, Howard John IV

    2006-04-12T23:59:59.000Z

    graphics community: non-photorealistic ren- dering. But what exactly is non-photorealistic rendering (NPR)? Confusion arises due to the fact that NPR is defined in terms of what it is not: photorealistic rendering. The goal of non-photorealistic rendering...-photorealistic rendering in terms of the images it pro- duces. Research in non-photorealism has produced images that emulate watercolor, oil paints, pen-and-ink illustrations, pencil renderings, technical illustration, and cel animation among others. Many NPR systems...

  18. Loose and sketchy rendering

    E-Print Network [OSTI]

    Abna, Tonya

    1999-01-01T23:59:59.000Z

    -photorealistic rendering, traditional pen-and-ink drawing, and graphical user interface design. Past and present researchers in these fields have much to offer in the way of guidelines and methods. Each of these areas is surveyed below. 2. 1 Non-Photorealistic Rendering..., will form a group in the user's perception. 28 fulfil! Figure 2. 11 The Law of Continuity. The indented options are considered by the user to be associated with each other, while the remaining two options are likewise considered to be asso- ciated...

  19. Perceiving and rendering users in a 3D interaction Patrick Horain, Jos Marques Soares, Dianle Zhou, Zhenbo Li,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Perceiving and rendering users in a 3D interaction Patrick Horain, José Marques Soares, Dianle Zhou videos of individual users unfortunately fail to render their joint actions on the objects they share are rendered by avatar mimicry. Communication gesture (not actions) are captured by real-time computer vision

  20. Byzantine Clients Rendered Harmless

    E-Print Network [OSTI]

    Liskov, Barbara

    2005-07-21T23:59:59.000Z

    Byzantine quorum systems have been proposed that work properly even when up to f replicas fail arbitrarily.However, these systems are not so successful when confronted with Byzantine faulty clients. This paper presents ...

  1. Fixing Failed States

    E-Print Network [OSTI]

    Yoo, John

    2010-01-01T23:59:59.000Z

    Islands 15. Timor-Leste 16. Haiti 17. Sao Tome and PrincipePakistan 11. Ivory Coast 12. Haiti 13. Burma 14. Kenya 15.In Somalia, Rwanda, Haiti, and the former Yugoslavia, failed

  2. An Approach To Painterly Rendering 

    E-Print Network [OSTI]

    Broussard, Garrett

    2014-10-28T23:59:59.000Z

    representational aesthetic style of those animations is referred to as photorealistic rendering. Most artists working in the field are unaware that non-photorealistic rendering, or NPR, is a highly achievable method of displaying animation that can allow... the artist a very high degree of control and freedom. With this project I present software that allows artists this very high level of control through a subset of NPR called painterly rendering. The term “painterly” means that the software renderer...

  3. Compressive Rendering of Multidimensional Scenes

    E-Print Network [OSTI]

    Sen, Pradeep

    Compressive Rendering of Multidimensional Scenes Pradeep Sen, Soheil Darabi, and Lei Xiao Advanced of using compressed sensing to reconstruct the 2D images produced by a rendering system, a process we called compressive rendering. In this work, we present the natural extension of this idea

  4. IMAGE BASED RENDERING WITH DEPTH CAMERAS: HOW MANY ARE NEEDED? Christopher Gilliam, James Pearson, Mike Brookes and Pier Luigi Dragotti

    E-Print Network [OSTI]

    Dragotti, Pier Luigi

    IMAGE BASED RENDERING WITH DEPTH CAMERAS: HOW MANY ARE NEEDED? Christopher Gilliam, James Pearson London Exhibition Road, SW7 2AZ, London, United Kingdom. ABSTRACT Image based rendering is a technique of traditional color images with depth images. This combination promises to improve the rendering quality

  5. Single-strips for fast interactive rendering

    E-Print Network [OSTI]

    Diaz-Gutierrez, Pablo; Bhushan, Anusheel; Gopi, M; Pajarola, Renato

    2006-01-01T23:59:59.000Z

    rendering. Most interactive render- ing packages supportIn order to correctly render such strips, non alter- natingRight: Evolution of the render front. As the interac- tive

  6. Non-photorealistic Rendering of Images as Evolutionary Stained Glass

    E-Print Network [OSTI]

    Ashlock, Dan

    Non-photorealistic Rendering of Images as Evolutionary Stained Glass Daniel Ashlock Mathematics glass. A collection of points that are the centers of weighted Voronoi tilings are evolved to minimize. A fractal model of stained glass is then run to create a stained glass texture with a similar average color

  7. Light and Color in Nature -Scattering Effects -

    E-Print Network [OSTI]

    Assarsson, Ulf

    1 Seminar WS 2003/04 Light and Color in Nature - Scattering Effects - Marcus Magnor WS03/04: Light and Color in Nature ­ Scattering Overview · Last Lecture ­ Interference · Today ­ Light scattering: water rendering #12;2 WS03/04: Light and Color in Nature ­ Scattering List of Topics · Rainbow ­ Stephan

  8. Parallel hierarchical radiosity rendering

    SciTech Connect (OSTI)

    Carter, M.

    1993-07-01T23:59:59.000Z

    In this dissertation, the step-by-step development of a scalable parallel hierarchical radiosity renderer is documented. First, a new look is taken at the traditional radiosity equation, and a new form is presented in which the matrix of linear system coefficients is transformed into a symmetric matrix, thereby simplifying the problem and enabling a new solution technique to be applied. Next, the state-of-the-art hierarchical radiosity methods are examined for their suitability to parallel implementation, and scalability. Significant enhancements are also discovered which both improve their theoretical foundations and improve the images they generate. The resultant hierarchical radiosity algorithm is then examined for sources of parallelism, and for an architectural mapping. Several architectural mappings are discussed. A few key algorithmic changes are suggested during the process of making the algorithm parallel. Next, the performance, efficiency, and scalability of the algorithm are analyzed. The dissertation closes with a discussion of several ideas which have the potential to further enhance the hierarchical radiosity method, or provide an entirely new forum for the application of hierarchical methods.

  9. Computer rendering and visual detection of orange peel Jonathan Konieczny, Gary Meyer

    E-Print Network [OSTI]

    Meyer, Gary

    applications. The orange peel measurements from a standard industrial instrument are used to construct a height field, and this surface is rendered using traditional normal mapping techniques. Comparisons are made that orange peel is more visible on dark paint colors than on light paint colors. The latter outcome suggests

  10. Tracking Graphics State forTracking Graphics State for Network RenderingNetwork Rendering

    E-Print Network [OSTI]

    Pratt, Vaughan

    Tracking Graphics State forTracking Graphics State for Network RenderingNetwork Rendering Ian Buck 2000 Distributed GraphicsDistributed Graphics Application Application Application Renderer Renderer Renderer Network How to manage distributed graphics applications, renderers, and displays? #12;HWWS 2000

  11. Interactive Rendering using the Render Cache Bruce Waltery, George Drettakisy, Steven Parkerz

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Interactive Rendering using the Render Cache Bruce Waltery, George Drettakisy, Steven Parkerz yi. Interactive rendering requires rapid visual feedback. The render cache is a new method for achieving this when using high-quality pixel-oriented renderers such as ray tracing that are usually considered too slow

  12. Brighter, more colorful colors and darker, deeper colors based on a theme of brilliance

    E-Print Network [OSTI]

    Fairchild, Mark D.

    ­ a highly colorful arrangement of flowers, a clear blue sky, and the glossy red lipstick of a beautiful lady, flesh tones - should be rendered as original while other features such as a blue sky on a crisp winter on the appearance of gray that diminishes to zero (G0) as the luminance of a chromatic stimulus approaches

  13. Physically Based Rendering Intersection Acceleration

    E-Print Network [OSTI]

    Kazhdan, Michael

    Physically Based Rendering (600.657) Intersection Acceleration #12;Intersection Testing Accelerated partitions: Group objects into clusters Cluster volumes may overlap #12;Uniform (Voxel) Grid Acceleration Acceleration · Trace rays through grid cells ­ Fast ­ Incremental A B C D E F Only check primitives

  14. Object individuation in infancy: the value of color and luminance

    E-Print Network [OSTI]

    Woods, Rebecca Jindalee

    2009-06-02T23:59:59.000Z

    The ability to individuate objects is one of our most fundamental cognitive capacities. Recent research has revealed that, when objects vary in color or luminance alone, infants fail to individuate until 11.5 months. However, color and luminance...

  15. GPUBased multiview rendering Franois de Sorbier

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    GPUBased multiview rendering François de Sorbier Graduate School of Science and Technology Keio two rendering passes reducing by half the frame rate. In this situation, the conversion from standard to stereoscopic images may involve some difficulties to maintain real time rendering if the geometry is made

  16. RENDERING FILTERS FOR CONTROLLING DETAIL AND

    E-Print Network [OSTI]

    RENDERING FILTERS FOR CONTROLLING DETAIL AND CREATING EFFECTS CHRISTOPHER ROBERT DECORO may be unified under the general theme of the rendering filter. Generally stated, such a filter is a passive, stateless operator that acts upon a decomposition of terms in the rendering equation

  17. Differential Point Rendering Aravind Kalaiah Amitabh Varshney

    E-Print Network [OSTI]

    Varshney, Amitabh

    Differential Point Rendering Aravind Kalaiah Amitabh Varshney University of Maryland1 Abstract. We present a novel point rendering primitive, called Differential Point (DP), that captures the local-based models. This information is used to efficiently render the surface as a collection of local neighborhoods

  18. Verifying Volume Rendering Using Discretization Error Analysis

    E-Print Network [OSTI]

    Kirby, Mike

    Verifying Volume Rendering Using Discretization Error Analysis Tiago Etiene, Daniel Jo¨nsson, Timo--We propose an approach for verification of volume rendering correctness based on an analysis of the volume rendering integral, the basis of most DVR algorithms. With respect to the most common discretization

  19. HDR CFA IMAGE RENDERING David Alleysson,1

    E-Print Network [OSTI]

    Alleysson, David

    HDR CFA IMAGE RENDERING David Alleysson,1 Laurence Meylan,2 and Sabine S¨usstrunk2 1Laboratory of the already demosaiced image. This render- ing is closer to retinal processing where an image is acquired framework, demosaicing is the final step of the rendering. Our method, inspired by retinal sampling

  20. The Eurographics Association 2002. Efficient Rendering of

    E-Print Network [OSTI]

    Heidrich, Wolfgang

    © The Eurographics Association 2002. Efficient Rendering of Spatial Bi-directional Reflectance general surface appearance representation. We describe a method for rendering such surfaces rapidly-painted surfaces. We also propose a method of rendering such spatial bi-directional reflectance distribution

  1. Automating Pen and InkAutomating Pen and Ink Landscape RenderingsLandscape Renderings

    E-Print Network [OSTI]

    Mower, James E.

    Automating Pen and InkAutomating Pen and Ink Landscape RenderingsLandscape Renderings Jim Mower geology They employThey employ ­­ Large scale viewsLarge scale views ­­ Pen and ink renderingsPen and ink renderings #12;ArminArmin LobeckLobeck LobeckLobeck wrote a wonderful book onwrote a wonderful book on block

  2. Using Photorealistic RenderManTM High-Quality Direct Volume Rendering

    E-Print Network [OSTI]

    Bailey, Mike

    1 Using Photorealistic RenderManTM for High-Quality Direct Volume Rendering Cyrus Jam Mike Bailey With the success of Pixar's recent feature films, everyone knows RenderMan to be the leading photorealistic renderer for animation and entertainment. What most people don't know is that it can also be used quite

  3. A nNon-photorealistic Model for Procedural Painterly Rendered Trees in the Style of Corot 

    E-Print Network [OSTI]

    Losure, Michael Robert

    2009-05-15T23:59:59.000Z

    5 Phong shading versus Gooch et al.?s NPR lighting model......................... 17 6 Comparison of colors produced by mixing yellow and blue paint versus colors produced with RGB linear blending............................ 18 7 An example ?L.... Non-photorealistic rendering (NPR) is the subgenre of computer graphics that focuses on creating expressive, artistically motivated images, often driven by concepts found in traditional art and 2D animation [9; 27]. Though NPR research is defined...

  4. Non-realistic digital rendering

    E-Print Network [OSTI]

    Ronai, Amanda Sharon

    1994-01-01T23:59:59.000Z

    . The intent of the digital model is to render a more expressive, visually interesting image. ACKNOWLEDGEMENTS I would like to thank my advisory committee, Susan L. Van Baerle, Dr. Donald H. House, and Dr. Norman C. Griswold for its support... and encouragement. I would especially like to thank Susan L. Van Baerle for reading numerous editions and giving speedy and helpful feedback. I would also like to thank Dr. Donald H. House for his support and helpful technical knowledge and finally, I would like...

  5. Render Safe | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Render Safe | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy...

  6. Render me Real? Investigating the Effect of Render Style on the Perception of Animated Virtual Humans

    E-Print Network [OSTI]

    Render me Real? Investigating the Effect of Render Style on the Perception of Animated Virtual of lifelike virtual humans has been the goal of many movie makers in the last decade. Recently, films of psychophysical experiments to determine whether render style affects how virtual humans are perceived. Motion

  7. INCREASING RENDERING PERFORMANCE OF GRAPHICS HARDWARE

    E-Print Network [OSTI]

    Whitton, Mary C.

    a compute-on-demand paradigm for the design of high-speed and energy-efficient graphics components. The goalINCREASING RENDERING PERFORMANCE OF GRAPHICS HARDWARE Justin Hensley A dissertation submitted RIGHTS RESERVED ii #12;ABSTRACT JUSTIN HENSLEY: Increasing Rendering Performance of Graphics Hardware

  8. Sphere Light Field Rendering Zigang Wang1

    E-Print Network [OSTI]

    Sphere Light Field Rendering Zigang Wang1 and Zhengrong Liang1,2 Departments of Radiology1 and Computer Science2 , State University of New York, Stony Brook, NY 11794, USA ABSTRACT Light field algorithm is one of the most famous image-based rendering techniques. In this paper, an improved light field

  9. NonPhotorealistic Rendering from Stereo Bartesaghi Sapiro

    E-Print Network [OSTI]

    Non­Photorealistic Rendering from Stereo Bartesaghi Sapiro Electrical and Computer Engineering­photorealistic render­ introduced this paper. Non­photorealistic render­ (NPR) provides alternative to render complex scenes by emphasizing high level salient perceptual tures. Particularly, pen­and­ink rendering duces

  10. Perceptually-Driven Decision Theory for Interactive Realistic Rendering

    E-Print Network [OSTI]

    Ferwerda, James A.

    Perceptually-Driven Decision Theory for Interactive Realistic Rendering REYNALD DUMONT, FABIO rendering at interactive rates on commodity graphics hardware. The approach uses efficient perceptual metrics within a decision theoretic framework to optimally order rendering operations, pro- ducing images

  11. Interactive Volume Rendering of Diffusion Tensor Data

    E-Print Network [OSTI]

    Hlawitschka, Mario

    2010-01-01T23:59:59.000Z

    ller. Volumeshop: o Interactive direct volume illustration.Kin04] [KKW05] [KTW06] Interactive Volume Rendering of Di?magic volume lens: An interactive focus+context technique

  12. auxiliary protein renders: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fixture based Haptic Rendering of Handwriting Engineering Websites Summary: Virtual Fixture based Haptic Rendering of Handwriting Jun Wu, Dangxiao Wang, Yuru Zhang State Key...

  13. IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, PREPRINT 1 Compressive Rendering: A Rendering

    E-Print Network [OSTI]

    Sen, Pradeep

    IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, PREPRINT 1 Compressive Rendering in a transform domain. Although CS has been applied to many problems in other fields, in computer graphics it has transform of the image during rendering. Since the energy of the image is concentrated more compactly

  14. Rendering Implicit Flow Volumes Daqing Xue, Caixia Zhang, Roger Crawfis*

    E-Print Network [OSTI]

    Crawfis, Roger

    Rendering Implicit Flow Volumes Daqing Xue, Caixia Zhang, Roger Crawfis* Department of Computer and then rendered using an unstructured volume rendering technique. Unless a detailed refinement of the flow volume-dimensional texture mapping and an interval volume segmentation coupled with a tetrahedron projection-based renderer

  15. Compression of Computer Graphics Images with Image-Based Rendering

    E-Print Network [OSTI]

    Shahabi, Cyrus

    Compression of Computer Graphics Images with Image-Based Rendering Ilmi Yoon and Ulrich Neumann information from previously rendered images. Images predicted from prior images are combined with a residual-based rendering tech- nique provides accurate motion prediction and accelerates rendering at the same time

  16. Schema-based Selective Rendering Framework Alexandros Zotos

    E-Print Network [OSTI]

    Mania, Katerina

    Schema-based Selective Rendering Framework Alexandros Zotos Technical University of Crete, Greece incorporated into rendering algorithms in order to optimize rendering computation and produce photorealistic images from a human rather than a machine point of view. In order to economize on rendering computation

  17. An Improved Vertex Caching Scheme for 3D Mesh Rendering

    E-Print Network [OSTI]

    Lin, Gang

    An Improved Vertex Caching Scheme for 3D Mesh Rendering Gang Lin and Thomas P.-Y. Yu Abstract to the graphics pipeline during rendering. To make effective use of the cache and facilitate rendering, it is key effective algorithm for generating a sequence for efficient rendering of 3D polygonal meshes based on greedy

  18. Volume Rendering Data with Uncertainty Information Suzana Djurcilov

    E-Print Network [OSTI]

    Robinson, Allan R.

    Volume Rendering Data with Uncertainty Information Suzana Djurcilov , Kwansik Kim , Pierre F. J uncertainty information in direct volume rendering. The goal is to produce vol- ume rendered images the uncertainty information directly into the volume rendering equation. The second method involves post

  19. Volume Rendering by Adaptive Refinement (revised January, 1989)

    E-Print Network [OSTI]

    Stanford University

    . 1988; Sabella 1988; Upson and Keeler 1988). The principal advantages of volume rendering over other

  20. A surface renderer for biological environments

    E-Print Network [OSTI]

    Pandu, Jai Prakash

    1993-01-01T23:59:59.000Z

    -detector ring is rotated around the patient. The raw output from the detector array is back projected to form an image of the slice of the body being scanned. The couch is moved and then another slice is obtained. The output from a CT scanner is a series... that (medically) relevant information is retained. This problem is well handled by the surface renderers. Surface renderers use a special preprocessing step; determining the surfaces of objects which are considered medically relevant [6]. Then they display...

  1. 3-DOF HAPTIC RENDERING C. Basdogan*

    E-Print Network [OSTI]

    Basdogan, Cagatay

    , character animation, digital sculpting, virtual museums), computer-aided product design (free-form modeling to a virtual environment. On the left portion of the figure, mechanical interaction takes place between a human. Introduction Haptic rendering enables a user to touch, feel, and manipulate virtual objects through a haptic

  2. Modeling, Animation, and Rendering of Human Figures

    E-Print Network [OSTI]

    Güdükbay, Ugur

    7 Modeling, Animation, and Rendering of Human Figures Ugur G¨ud¨ukbay, B¨ulent ¨Ozg¨u¸c, Aydemir, Ankara, Turkey Human body modeling and animation has long been an important and challenging area virtual humans in action: video games, films, television, virtual reality, ergonomics, medicine

  3. A critical comparison of human face rendering techniques

    E-Print Network [OSTI]

    Arizpe, Arturo Andrew

    2006-01-01T23:59:59.000Z

    Human skin exhibits complex light reflectance properties that make it difficult to render realistically. In recent years, many techniques have been introduced to render skin, with varying degrees of complexity and realism. ...

  4. arabidopsis renders transgenic: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the results of the gene-fusion constructs in tobacco and Arabidopsis suggest either... Bennett, Joy Lynn 2012-06-07 3 Polygon Rendering Flat Rendering Computer Technologies and...

  5. 9 Multi-Dimensional Transfer Functions for Volume Rendering

    E-Print Network [OSTI]

    Frey, Pascal

    9 Multi-Dimensional Transfer Functions for Volume Rendering JOE KNISS, GORDON KINDLMANN.1 Introduction Direct volume-rendering has proven to be an effective and flexible visualization method for 3D scalar fields. Transfer functions are funda- mental to direct volume-rendering because their role

  6. GPU rendering for autostereoscopic displays Francois de Sorbier

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    GPU rendering for autostereoscopic displays Franc¸ois de Sorbier LABINFO-IGM UMR CNRS 8049. In the case of real-time computer graphics images, the standard approach consists in rendering every view displays in a single render- ing pass. Our algorithm is based on the fact that vertices properties remain

  7. Automating Landscape Illustration with Pen and Ink Style Rendering

    E-Print Network [OSTI]

    Mower, James E.

    Automating Landscape Illustration with Pen and Ink Style Rendering James E. Mower ABSTRACT from digital elevation models (DEMs) to direct the rendering of landform features in the style of pen-dimensional (2D) rendered image processing techniques, object space procedures operate directly on 3

  8. Stylized Rendering Using Samples of a Painted Image

    E-Print Network [OSTI]

    Chen, Sheng-Wei

    Stylized Rendering Using Samples of a Painted Image Chung-Ren Yan, Ming-Te Chi, Tong-Yee Lee painterly art maps (PAMs) for 3D nonphotorealistic rendering. Our technique can automatically transfer complicated ones with significant variations in stroke characteristics. During the rendering or animation

  9. Eurographics Symposium on Rendering 2008 Steve Marschner and Michael Wimmer

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Eurographics Symposium on Rendering 2008 Steve Marschner and Michael Wimmer (Guest Editors) Volume / Grenoble Universités ­ INRIA Abstract We present a new and accurate method to render the atmosphere in real an important cue to evaluate dis- tances. Rendering these effects in real time, continuously from ground

  10. Eurographics Symposium on Rendering 2008 Steve Marschner and Michael Wimmer

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Eurographics Symposium on Rendering 2008 Steve Marschner and Michael Wimmer (Guest Editors) Volume 3University of Illinois Urbana-Champaign 4University of Washington Abstract We describe a rendering regions. The result renders 10K-face meshes into custom clip-art in seconds. 1. Introduction Compared

  11. Haptic Rendering in Virtual Environments Cagatay Basdogan1,

    E-Print Network [OSTI]

    Basdogan, Cagatay

    Haptic Rendering in Virtual Environments Cagatay Basdogan1, , Mandayam A. Srinivasan2 1 Jet, srini @mit.edu 1. Introduction The goal of haptic rendering is to enable a user to touch, feel and rendering techniques1 indicates growing interest in this exciting new area of research, which we call

  12. Eurographics Symposium on Rendering 2008 Steve Marschner and Michael Wimmer

    E-Print Network [OSTI]

    Keinan, Alon

    Eurographics Symposium on Rendering 2008 Steve Marschner and Michael Wimmer (Guest Editors) Volume 27 (2008), Number 4 Tensor Clustering for Rendering Many-Light Animations Milos Hasan1 , Edgar animations rendered with our algorithm, with environment illumination and multiple-bounce indirect lighting

  13. Unsupervised extraction of coherent regions for image based rendering

    E-Print Network [OSTI]

    Dragotti, Pier Luigi

    Unsupervised extraction of coherent regions for image based rendering Jesse Berent and Pier Luigi, UK {jesse.berent, p.dragotti}@imperial.ac.uk Abstract Image based rendering using undersampled light information. In pop-up light field rendering [18], the scene is segmented into coherent layers, usually

  14. An Object-Based Audio Rendering System using Spatial Parameters

    E-Print Network [OSTI]

    Chang, Pao-Chi

    An Object-Based Audio Rendering System using Spatial Parameters Kuo-Lun Huang, Tai-Ming Chang rendering system, in which the audio signal of each object is distributed to multi-channel systems by spatial parameters. The operation of the rendering system is based on the sound localization theories

  15. Anatomic measurement accuracy: CT parameters and 3D rendering effects

    E-Print Network [OSTI]

    Vorperian, Houri K.

    Anatomic measurement accuracy: CT parameters and 3D rendering effects Brian J Whyms a, E Michael of Neuroscience #12;INTRODUCTION · Measurements from 3D-CT rendering are used in research and clinical management-CT rendering techniques on measurements #12;METHODS Scanned: · 3 human mandibles · a phantom object Phantom

  16. Perception-Based Transparency Optimization for Direct Volume Rendering

    E-Print Network [OSTI]

    Chen, Wei

    Perception-Based Transparency Optimization for Direct Volume Rendering Ming-Yuen Chan, Student. Perceptual enhancement on transparent layers in direct volume rendered images: a CT head dataset with layered structures (left); layers are enhanced using our proposed rendering optimization method (right). Abstract

  17. Aliveness: Perceived Instability from a Passive Haptic Texture Rendering System

    E-Print Network [OSTI]

    Tan, Hong Z.

    Aliveness: Perceived Instability from a Passive Haptic Texture Rendering System Seungmoon Choi interacting with virtual textures rendered with a force-feedback haptic interface. Our work is aimed during our previous psychophysical experiments performed using a popular texture rendering method (spring

  18. Using Hierarchical Simplicial Meshes to Render Atmospheric Effects

    E-Print Network [OSTI]

    Atalay, F. Betül

    Using Hierarchical Simplicial Meshes to Render Atmospheric Effects F. Betul Atalay David M. Mount natural phenomena. An important problem in this area is that of rendering scenes containing atmospheric and smoke. Generating photorealistic renderings through ray-tracing is computationally very demanding

  19. Interactive Rendering of Trees with Shading and Shadows

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Interactive Rendering of Trees with Shading and Shadows Alexandre Meyer Fabrice Neyret Pierre Abstract. The goal of this paper is the interactive rendering of 3D trees covering a landscape of view and light directions. We associate a BT for each level of the hierarchy. When rendering

  20. Customizing Painterly Rendering Styles Using Stroke Processes Mingtian Zhao

    E-Print Network [OSTI]

    Zhu, Song Chun

    Customizing Painterly Rendering Styles Using Stroke Processes Mingtian Zhao Song-Chun Zhu styles rendered using our method. (a) has lower lightness contrast than (b) thus appears a little more. Abstract In this paper, we study the stroke placement problem in painterly rendering, and present

  1. REAL-TIME NON-PHOTOREALISTIC RENDERING TECHNIQUES

    E-Print Network [OSTI]

    Weske, Mathias

    REAL-TIME NON-PHOTOREALISTIC RENDERING TECHNIQUES FOR ILLUSTRATING 3D SCENES AND THEIR DYNAMICS This thesis addresses real-time non-photorealistic rendering techniques and their applications in interactive visualization. Real-time rendering has emerged as an important discipline within computer graphics developing

  2. A new formulation of differential radiosity and a rendering application

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A new formulation of differential radiosity and a rendering application D. Arquès V. Biri O. The gradient of this solution have been studied but not often used in a context of pure rendering. We present in this article a method to render a surface using the radiosity contour levels. First, we define a differential

  3. Direct Rendering of Deformable Volume Data Shiaofen Fang

    E-Print Network [OSTI]

    Fang, Shiaofen

    Direct Rendering of Deformable Volume Data Shiaofen Fang Department of Computer and Information In this paper, we present a new deformable volume rendering algorithm. The volume deformation is modeled to directly render the deformed volume without going through the expensive volume construction process

  4. RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING

    E-Print Network [OSTI]

    RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING Guotong Feng , Hui at a fixed bit rate. This method, which we call resolution enhanced rendering (RER), works by adaptively enhanced rendering (RER) for jointly optimizing the THIS WORK IS SUPPORTED BY THE XEROX FOUNDATION. MRC

  5. Accelerated Stereoscopic Rendering using GPU Franois de Sorbier

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Accelerated Stereoscopic Rendering using GPU François de Sorbier Université ParisEst LABINFOIGM for the second view in the traditional rendering pipeline. Even for very complex scenes, our method provides in numerous articles [Eng06a, Fer04a]. This paper, dealing with stereoscopic rendering acceleration, belongs

  6. Adaptive Streaming and Rendering of Large Terrains using Strip Masks

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Adaptive Streaming and Rendering of Large Terrains using Strip Masks Joachim Pouderoux Jean-Eudes Marvie IPARLA Project (LaBRI - INRIA Futurs) University of Bordeaux, France Abstract Terrain rendering is an important factor in the rendering of virtual scenes. If they are large and detailed, digital terrains can

  7. Eurographics Symposium on Rendering 2011 Ravi Ramamoorthi and Erik Reinhard

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Eurographics Symposium on Rendering 2011 Ravi Ramamoorthi and Erik Reinhard (Guest Editors) Volume 30 (2011), Number 4 Silhouette-Aware Warping for Image-Based Rendering Gaurav Chaurasia1 , Olga-based rendering (IBR) techniques allow capture and display of 3D environments using photographs. Mod- ern IBR

  8. A Survey on Hair Modeling: Styling, Simulation, and Rendering

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 A Survey on Hair Modeling: Styling, Simulation, and Rendering Kelly Ward Florence Bertails Tae in the major topics of hair modeling: hairstyling, hair simulation, and hair rendering. Because-based simulation, hardware rendering, light scattering, user-interaction, collision handling I. INTRODUCTION

  9. Modeling, Characterizing, and Enhancing User Experience in Cloud Mobile Rendering

    E-Print Network [OSTI]

    California at San Diego, University of

    Modeling, Characterizing, and Enhancing User Experience in Cloud Mobile Rendering Yao Liu, Shaoxuan of California, San Diego {yal019, shaoxuan, dey}@ece.ucsd.edu Abstract--Cloud Mobile Rendering (CMR), where compute intensive rendering is performed on cloud servers instead of on mobile devices, can be a promising

  10. Navigating in Virtual Environments with 360 Omnidirectional Rendering Jrme Ardouin

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Navigating in Virtual Environments with 360 Omnidirectional Rendering Jérôme Ardouin ESIEA - INSA to a rendering method of reference, i.e. a perspective projection, in a basic navigation task. Our results con- firm that using any omnidirectional rendering method could lead to more efficient navigation in terms

  11. Eurographics Symposium on Rendering 2010 Jason Lawrence and Marc Stamminger

    E-Print Network [OSTI]

    Sen, Pradeep

    Eurographics Symposium on Rendering 2010 Jason Lawrence and Marc Stamminger (Guest Editors) Volume 29 (2010), Number 4 Compressive estimation for signal integration in rendering Pradeep Sen and Soheil Darabi Advanced Graphics Lab, University of New Mexico Abstract In rendering applications, we are often

  12. Realistic Rendering of an Organ Surface in Real-Time

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Realistic Rendering of an Organ Surface in Real-Time for Laparoscopic Surgery Simulation Raphaël : 10.1007/s003710100118 #12;Abstract This paper deals with the rendering issues of the problem. To meet the real-time constraint we use advanced graphics features such as multi- pass rendering, Open

  13. To Render Justice: Models of ‘Justice’ in the International Criminal Tribunal for the Former Yugoslavia

    E-Print Network [OSTI]

    Campbell, Kirsten

    2005-01-01T23:59:59.000Z

    Chamber Judgement’). To Render Justice Thus, sexual violence460. Kvocka, par. 182. To Render Justice The ‘Subject ofoffence than war crimes. To Render Justice Tribunal held

  14. Resolution-independent surface rendering using programmable graphics hardware

    DOE Patents [OSTI]

    Loop, Charles T. (Bellevue, WA); Blinn, James Frederick (Bellevue, WA)

    2008-12-16T23:59:59.000Z

    Surfaces defined by a Bezier tetrahedron, and in particular quadric surfaces, are rendered on programmable graphics hardware. Pixels are rendered through triangular sides of the tetrahedra and locations on the shapes, as well as surface normals for lighting evaluations, are computed using pixel shader computations. Additionally, vertex shaders are used to aid interpolation over a small number of values as input to the pixel shaders. Through this, rendering of the surfaces is performed independently of viewing resolution, allowing for advanced level-of-detail management. By individually rendering tetrahedrally-defined surfaces which together form complex shapes, the complex shapes can be rendered in their entirety.

  15. A Multiresolution Image Cache for Volume Rendering

    SciTech Connect (OSTI)

    LaMar, E; Pascucci, V

    2003-02-27T23:59:59.000Z

    The authors discuss the techniques and implementation details of the shared-memory image caching system for volume visualization and iso-surface rendering. One of the goals of the system is to decouple image generation from image display. This is done by maintaining a set of impostors for interactive display while the production of the impostor imagery is performed by a set of parallel, background processes. The system introduces a caching basis that is free of the gap/overlap artifacts of earlier caching techniques. instead of placing impostors at fixed, pre-defined positions in world space, the technique is to adaptively place impostors relative to the camera viewpoint. The positions translate with the camera but stay aligned to the data; i.e., the positions translate, but do not rotate, with the camera. The viewing transformation is factored into a translation transformation and a rotation transformation. The impostor imagery is generated using just the translation transformation and visible impostors are displayed using just the rotation transformation. Displayed image quality is improved by increasing the number of impostors and the frequency that impostors are re-rendering is improved by decreasing the number of impostors.

  16. Color superconductivity and dense quark matter

    E-Print Network [OSTI]

    Massimo Mannarelli

    2008-12-26T23:59:59.000Z

    The properties of cold and dense quark matter have been the subject of extensive investigation, especially in the last decade. Unfortunately, we still lack of a complete understanding of the properties of matter in these conditions. One possibility is that quark matter is in a color superconducting phase which is characterized by the formation of a diquark condensate. We review some of the basic concepts of color superconductivity and some of the aspects of this phase of matter which are relevant for compact stars. Since quarks have color, flavor as well as spin degrees of freedom many different color superconducting phases can be realized. At asymptotic densities QCD predicts that the color flavor locked phase is favored. At lower densities where the QCD coupling constant is large, perturbative methods cannot be applied and one has to rely on some effective model, eventually trying to constrain such a model with experimental observations. The picture is complicated by the requirement that matter in the interior of compact stars is in weak equilibrium and neutral. These conditions and the (possible) large value of the strange quark mass conspire to separate the Fermi momenta of quarks with different flavors, rendering homogenous superconducting phases unstable. One of the aims of this presentation is to introduce non-experts in the field to some of the basic ideas of color superconductivity and to some of its open problems.

  17. Rule Proposed to Prohibit Importation of Products that Fail to...

    Energy Savers [EERE]

    Rule Proposed to Prohibit Importation of Products that Fail to Comply with DOE Energy Conservation Standards Rule Proposed to Prohibit Importation of Products that Fail to Comply...

  18. A shader based approach to painterly rendering

    E-Print Network [OSTI]

    Pal, Kaushik

    2004-11-15T23:59:59.000Z

    for Animation [10] . . . . . . . . . 12 10 Cassidy J. Curtis, Sean E. Anderson, Joshua E Sims, Kurt W. Fleis- cher and David H. Salesins' Computer Generated Water Color [ 17]. . . . 13 11 Digital paintings with Fractal Painter... of it, thus involving the viewer in the interpretive process. By using various shapes, sizes and density of brush- strokes, a painter can establish the interaction of light with a surface and the texture of a surface. Figure 1 shows how the different...

  19. T-532: Vulnerability in Graphics Rendering Engine Could Allow...

    Broader source: Energy.gov (indexed) [DOE]

    to the location in Windows Explorer. When the user navigates to the share, the affected control path is triggered via the Graphics Rendering Engine. The specially crafted...

  20. An Evaluation on Woven Cloth Rendering Wallace Yuen

    E-Print Network [OSTI]

    Sun, Jing

    technologies for cloth rendering. However, it is not clear what technology is suitable for what types far no research exists comparing digital representations of fabric rendering techniques. This paper, and weaving patterns. Several existing methods are discussed and we analyze their advantages and disadvan

  1. Constrained Inverse Volume Rendering for Planetary Nebulae Marcus Magnor

    E-Print Network [OSTI]

    Utah, University of

    Inverse Volume Rendering I.4.m [Image Processing and Computer Vision]: Miscellaneous--Volumetric Modeling that we are observing 2D projections of 3D volumes of glowing gas, the actual spatial struc- ture of PNeConstrained Inverse Volume Rendering for Planetary Nebulae Marcus Magnor MPI Informatik, Germany

  2. Method of producing hydrogen, and rendering a contaminated biomass inert

    DOE Patents [OSTI]

    Bingham, Dennis N. (Idaho Falls, ID) [Idaho Falls, ID; Klingler, Kerry M. (Idaho Falls, ID) [Idaho Falls, ID; Wilding, Bruce M. (Idaho Falls, ID) [Idaho Falls, ID

    2010-02-23T23:59:59.000Z

    A method for rendering a contaminated biomass inert includes providing a first composition, providing a second composition, reacting the first and second compositions together to form an alkaline hydroxide, providing a contaminated biomass feedstock and reacting the alkaline hydroxide with the contaminated biomass feedstock to render the contaminated biomass feedstock inert and further producing hydrogen gas, and a byproduct that includes the first composition.

  3. Laterotactile Rendering of Vector Graphics with the Stroke Pattern

    E-Print Network [OSTI]

    Hayward, Vincent

    Laterotactile Rendering of Vector Graphics with the Stroke Pattern Vincent Lévesque1 and Vincent are used extensively in the design of tactile graphics for persons with visual impairments. A tactile is demonstrated with the rendering of lines, circles and polygons, and is extensible to other vector graphics

  4. INTERACTION WITH 3D IMAGE DATA THROUGH VOLUME RENDERED VIEWS.

    E-Print Network [OSTI]

    Pelizzari, Charles A.

    , since the 3D image dataset is operated on directly and not transformed into a simple 3 #12; binary weighted compositing with gradient and depth shading. The algorithm is highly optimized for rapid rendering large aggregate computimg power present in many hospitals and laboratories. Mapping from the rendered

  5. Volume painting: incorporating volumetric rendering with line integral convolution (LIC) 

    E-Print Network [OSTI]

    Lee, Jaewook

    2005-11-01T23:59:59.000Z

    (NPR) . . . . . . . . . . . . . 5 II.2. Volume Rendering . . . . . . . . . . . . . . . . . . . . . . . 5 II.3. Line Integral Convolution (LIC) . . . . . . . . . . . . . . . . 6 III METHODOLOGY . . . . . . . . . . . . . . . . . . . . . . . . . 8 III.1... INTRODUCTION In this thesis, we introduce a new Non-Photorealistic Rendering (NPR) technique, called Volume Painting. An example of Volume Painting is shown in Figure 1. Fig. 1. Volume Painting of the Implicit Geometry. During the last decade, NPR has become...

  6. A photometric investigation of ultra-efficient LEDs with high color rendering index and high

    E-Print Network [OSTI]

    Demir, Hilmi Volkan

    and distribution temperature," J. Opt. Soc. Am. 58(11), 1528­1535 (1968). #119158 - $15.00 USD Received 27 Oct 2009 Sun2 and Hilmi Volkan Demir1,2* 1 Department of Electrical and Electronics Engineering, Department temperature of 3000 K are shown to be achieved using nanocrystal luminophores. ©2009 Optical Society

  7. IBRAC: Image-Based Rendering Acceleration and Compression Ilmi Yoon and Ulrich Neumann

    E-Print Network [OSTI]

    Shahabi, Cyrus

    IBRAC: Image-Based Rendering Acceleration and Compression Ilmi Yoon and Ulrich Neumann Computer ABSTRACT This paper presents an image-based rendering technique that has several benefits to remote or web-based rendering sys- tems. It adapts an image-based rendering acceleration method to the direct rendering

  8. Solar Oven, Take One: FAIL | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Solar Oven, Take One: FAIL Solar Oven, Take One: FAIL June 15, 2011 - 11:56am Addthis Our homemade solar oven. | Courtesy of Moon Choe Our homemade solar oven. | Courtesy of Moon...

  9. Haptic Rendering of Topological Constraints to Users Manipulating Serial Virtual Linkages

    E-Print Network [OSTI]

    Constantinescu, Daniela

    Haptic Rendering of Topological Constraints to Users Manipulating Serial Virtual Linkages Daniela-- This paper presents an approach for haptic rendering of topological constraints to users operating serial rendering. I. INTRODUCTION Haptic interaction with physically-motivated virtual en- vironments provides

  10. Rendering the Electromechanical Valve Actuator Globally Asymptotically Stable Katherine S. Peterson*

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    Rendering the Electromechanical Valve Actuator Globally Asymptotically Stable Katherine S. Peterson to render the electromechanical valve actuator (EVA) globally asymptotically stable (GAS). Elec model. Here, we demonstrate and prove that our controller renders the system GAS without any assumption

  11. Spatial Sound Rendering Using Measured Room Impulse Responses Yan Li, Peter F. Driessen

    E-Print Network [OSTI]

    Driessen, Peter F.

    Spatial Sound Rendering Using Measured Room Impulse Responses Yan Li, Peter F. Driessen Dept, Banff Centre Banff, Alberta, Canada Abstract-- Spatial sound rendering has many applications different quality and complexity requirements. This paper presents a new spatial sound rendering framework

  12. Parallel Volume-Rendering Algorithm Performance on Mesh-Connected Multicomputers

    E-Print Network [OSTI]

    Shahabi, Cyrus

    Parallel Volume-Rendering Algorithm Performance on Mesh-Connected Multicomputers Ulrich Neumann rendering algorithms. This issue has not been addressed in papers describing particular parallel implementations, but is pertinent to anyone dc- signing or implementing parallel rendering algorithms. Parallel

  13. Interactive Translucent Volume Rendering and Procedural Modeling Joe Kniss Simon Premoze Charles Hansen David Ebert

    E-Print Network [OSTI]

    Kniss, Joe Michael

    Interactive Translucent Volume Rendering and Procedural Modeling Joe Kniss Simon Premoze¶ Charles School of Electrical and Computer Engineering Purdue University Figure 1: A translucent fish rendered. Abstract Direct volume rendering is a commonly used technique in visual- ization applications. Many

  14. EUROGRAPHICS 2008 STAR State of The Art Report Multiperspective Modeling, Rendering, and Imaging

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    EUROGRAPHICS 2008 STAR ­ State of The Art Report Multiperspective Modeling, Rendering, and Imaging, we provide a practical guide on topics in multiperspective modeling and rendering methods for creating specific multiperspective rendering effects. Furthermore, we show that many of these cameras

  15. Real-time shader rendering of holographic stereograms

    E-Print Network [OSTI]

    Smalley, Daniel E.

    Horizontal-parallax-only holographic stereograms of nearly SDTV resolution (336 pixels by 440 lines by 96 views) of textured and normal-mapped models (500 polygons) are rendered at interactive rates (10 frames/second) on ...

  16. Frequency analysis and sheared reconstruction for rendering motion blur

    E-Print Network [OSTI]

    Egan, Kevin

    Motion blur is crucial for high-quality rendering, but is also very expensive. Our first contribution is a frequency analysis of motion-blurred scenes, including moving objects, specular reflections, and shadows. We show ...

  17. THE MATHEMATICS OF QUADRIC SURFACE RENDERING AND SOI

    E-Print Network [OSTI]

    Treuille, Adrien

    of SOID, and those who have modified it over the years: Thad Beier, Mike e m Chou, and Paul HeckbertTHE MATHEMATICS OF D QUADRIC SURFACE RENDERING AND SOI Paul S. Heckbert p Three Dimensional

  18. Volume painting: incorporating volumetric rendering with line integral convolution (LIC)

    E-Print Network [OSTI]

    Lee, Jaewook

    2005-11-01T23:59:59.000Z

    3137 TAMU College Station, TX 77843-3137 jaewooklee2001@yahoo.com Education M.S. in Visualization Sciences Texas A&M University, August 2005 B.F.A. in Graphic Design Pusan National University, February 1997 ... approach created by com- bining volumetric rendering techniques with the Line Integral Convolution (LIC) in 3D space. Although some techniques that combine volume rendering with the LIC have been introduced in computer graphics, they are mainly used...

  19. Introduction to Color Superconductivity

    E-Print Network [OSTI]

    G. Nardulli

    2006-10-23T23:59:59.000Z

    At high nuclear density and small temperature, due to the asymptotic freedom property of Quantum ChromoDynamics and to the existence of an attractive channel in the color interaction, diquark condensates might be formed. Since these condensates break the color gauge symmetry, this phenomenon has the name of color superconductivity. In the last few years this has become a very active field of research. While a direct experimental test is still missing, color superconductivity might have implications in astrophysics because for some compact stars, e.g. pulsars, the baryon densities necessary for color superconductivity can probably be reached.

  20. Measurements from 3D-CT renderings are used in research and clinical management

    E-Print Network [OSTI]

    Vorperian, Houri K.

    Measurements from 3D-CT renderings are used in research and clinical management: · Characterization for the prism]) RENDERING TECHNIQUES USED in ANALYZE 10.0: - Volume Render - (2) Volumes of Interest 1) VOI-Auto & 2) VOI-Manual TOTAL 3D-CT MODELS: 3 mandibles X 18 CT series X 3 rendering techniques = 162 mandible

  1. Haptic Rendering of Parametric Surfaces Using a Feedback Stabilized Extremal Distance Tracking Algorithm

    E-Print Network [OSTI]

    Gillespie, Brent

    Haptic Rendering of Parametric Surfaces Using a Feedback Stabilized Extremal Distance Tracking rendering. 1. Introduction Haptic rendering is the process by which virtual objects are made apparent to be felt and at the same time made available to be manipulated by a human user. Haptic render- ing requires

  2. Artistic Rendering of Portraits Mingtian Zhao and Song-Chun Zhu

    E-Print Network [OSTI]

    Zhu, Song Chun

    Artistic Rendering of Portraits Mingtian Zhao and Song-Chun Zhu Abstract This chapter presents an overview of the latest artistic portrait rendering techniques. Artistic rendering or portraits can, namely, a rendered portrait image should preserve a certain amount of the original face's information

  3. Generating and Rendering Four-Dimensional Polytopes John M. Sullivan, Geometry Supercomputer Project

    E-Print Network [OSTI]

    Sullivan, John M.

    Generating and Rendering Four-Dimensional Polytopes John M. Sullivan, Geometry Supercomputer, and can be rendered in three dimensions in stereographic projection. In this article we construct one with Mathematica graphics, or with a more sophisticated renderer such as RenderMan. Regular Polytopes and Soap

  4. Physically Accurate Haptic Rendering of Elastic Object for a Haptic Glove

    E-Print Network [OSTI]

    Lee, Chan-Su

    Physically Accurate Haptic Rendering of Elastic Object for a Haptic Glove Chan-Su Lee Abstract for Rutgers Master II and how to take advantage of its features in the modeled haptic rendering. Finally, we the force fast. 1.2 Modeling for Haptic Rendering Haptic rendering is the process of computing

  5. LOD-Sprite Technique for Accelerated Terrain Rendering Baoquan Chen1

    E-Print Network [OSTI]

    Chen, Baoquan

    LOD-Sprite Technique for Accelerated Terrain Rendering Baoquan Chen1 SUNY at Stony Brook J. Edward present a new rendering technique, termed LOD-sprite render- ing, which uses a combination of a level-of-detail (LOD) represen- tation of the scene together with reusing image sprites (previously rendered images

  6. Haptic Rendering of Parametric Surfaces Using a Feedback Stabilized Extremal Distance Tracking Algorithm

    E-Print Network [OSTI]

    Gillespie, Brent

    1 Haptic Rendering of Parametric Surfaces Using a Feedback Stabilized Extremal Distance Tracking representation of haptic rendering. Haptic rendering is the process by which virtual objects are made apparent to be felt and at the same time made available to be manipulated by a human user. Haptic rendering requires

  7. Perceptual Illumination Components: A New Approach to Efficient, High Quality Global Illumination Rendering

    E-Print Network [OSTI]

    Ferwerda, James A.

    Rendering William A. Stokes James A. Ferwerda Bruce Walter Donald P. Greenberg Program of Computer Graphics, global illumination rendering. The metric is based on a rendering-by-components framework in which overhead to the rendering process. This perceptual met- ric should enable the development of an important

  8. 15.13 A Hierarchical Volume Renderer Tool for the Atmospheric Sciences G. Romine*,1

    E-Print Network [OSTI]

    Wilhelmson, Robert

    15.13 A Hierarchical Volume Renderer Tool for the Atmospheric Sciences G. Romine*,1 , D. Porter2 rendering tool in meteorology. While an excellent tool, the interactive surface rendering performance visualization tools for interactive analysis. The Hierarchical Volume Renderer (HVR) is an alternative

  9. Modeling and Rendering of Points with Local Aravind Kalaiah Amitabh Varshney

    E-Print Network [OSTI]

    Varshney, Amitabh

    100 Modeling and Rendering of Points with Local Geometry Aravind Kalaiah Amitabh Varshney Graphics AND VARSHNEY: MODELING AND RENDERING OF POINTS WITH LOCAL GEOMETRY 101 Abstract We present a novel rendering per point than the traditional point-based models. This information is used to efficiently render

  10. Pencil-Like Sketch Rendering of 3D Scenes Using Trajectory Planning and Dynamic Tracking

    E-Print Network [OSTI]

    Kara, Levent Burak

    Pencil-Like Sketch Rendering of 3D Scenes Using Trajectory Planning and Dynamic Tracking Günay non-photorealistic rendering method to render 3D scenes in the form of pencil-like sketches. This work then produces the rendered sketch, whose characteristics can be adjusted with a set of trajectory and tracking

  11. Isotropization from Color Field Condensate in heavy ion collisions

    E-Print Network [OSTI]

    Stefan Floerchinger; Christof Wetterich

    2014-08-27T23:59:59.000Z

    The expanding fireball shortly after a heavy ion collision may be qualitatively described by a condensate of color fields or gluons which is analogous to Bose-Einstein-condensation for massive bosonic particles. This condensate is a transient non-equilibrium phenomenon and breaks Lorentz-boost symmetry. The dynamics of color field condensates involves collective excitations and is rather different from the perturbative scattering of gluons. In particular, it provides for an efficient mechanism to render the local pressure approximately isotropic after a short time of 0.2 fm/c. We suggest that an isotropic color field condensate may play a central role for a simple description of prethermalization and isotropization in the early stages of the collision.

  12. Digital color representation

    DOE Patents [OSTI]

    White, James M. (Los Alamos, NM); Faber, Vance (Los Alamos, NM); Saltzman, Jeffrey S. (Los Alamos, NM)

    1992-01-01T23:59:59.000Z

    An image population having a large number of attributes is processed to form a display population with a predetermined smaller number of attributes which represent the larger number of attributes. In a particular application, the color values in an image are compressed for storage in a discrete lookup table (LUT) where an 8-bit data signal is enabled to form a display of 24-bit color values. The LUT is formed in a sampling and averaging process from the image color values with no requirement to define discrete Voronoi regions for color compression. Image color values are assigned 8-bit pointers to their closest LUT value whereby data processing requires only the 8-bit pointer value to provide 24-bit color values from the LUT.

  13. Extended quantum color coding

    SciTech Connect (OSTI)

    Hayashi, A.; Hashimoto, T.; Horibe, M. [Department of Applied Physics, Fukui University, Fukui 910-8507 (Japan)

    2005-01-01T23:59:59.000Z

    The quantum color coding scheme proposed by Korff and Kempe [e-print quant-ph/0405086] is easily extended so that the color coding quantum system is allowed to be entangled with an extra auxiliary quantum system. It is shown that in the extended scheme we need only {approx}2{radical}(N) quantum colors to order N objects in large N limit, whereas {approx}N/e quantum colors are required in the original nonextended version. The maximum success probability has asymptotics expressed by the Tracy-Widom distribution of the largest eigenvalue of a random Gaussian unitary ensemble (GUE) matrix.

  14. Color Superconducting Neutral Matter

    E-Print Network [OSTI]

    R. Casalbuoni

    2006-01-20T23:59:59.000Z

    We describe the effects of the strange quark mass and of the color and electric neutrality on the superconducing phases of QCD.

  15. When Lyapunov exponents fail to exist William Ott

    E-Print Network [OSTI]

    Yorke, James

    When Lyapunov exponents fail to exist William Ott Courant Institute of Mathematical Sciences New such that Lyapunov exponents fail to exist at nearly every point in the phase space R2 despite the fact that the flow admits a unique natural measure. This example illustrates that the existence of Lyapunov exponents

  16. The Borneo Project : Indonesia Fails to Stop Illegal Logging, Report Says Indonesia Fails to Stop Illegal Logging, Report Says

    E-Print Network [OSTI]

    The Borneo Project : Indonesia Fails to Stop Illegal Logging, Report Says Indonesia Fails to Stop Illegal Logging, Report Says by Irwan Firdaus, The Associated Press January 15th, 2003 JAKARTA, Indonesia -- Corruption in Indonesia's police and military has contributed to a surge in illegal logging that has

  17. Surface Light Field Rendering for Virtual Product Design

    E-Print Network [OSTI]

    Behnke, Sven

    Surface Light Field Rendering for Virtual Product Design Jan MESETH, Gero MÃ?LLER, Reinhard KLEIN illumination solution including accurate materials, which is stored as an outgoing Surface Light Field (SLF-facto standard in manufacturing industries like the automotive industry. They are used, e.g., for performing

  18. Bibliography 1. Color Vision

    E-Print Network [OSTI]

    Rheingans, Penny

    . Visual Perception: Physiology, Psychology, and Ecology, 2nd edition. Lawrence Erlbaum Associates, Hove UK . Elsvier/North-Holland, New York/Amsterdam, 1981. S. L. Guth. Unified model for human color perception, color, movement, and depth: Anatomy, physiology, and perception. Science, 240:740-749, May 6 1988

  19. Unfolding the color code

    E-Print Network [OSTI]

    Aleksander Kubica; Beni Yoshida; Fernando Pastawski

    2015-03-06T23:59:59.000Z

    The topological color code and the toric code are two leading candidates for realizing fault-tolerant quantum computation. Here we show that the color code on a $d$-dimensional closed manifold is equivalent to multiple decoupled copies of the $d$-dimensional toric code up to local unitary transformations and adding or removing ancilla qubits. Our result not only generalizes the proven equivalence for $d=2$, but also provides an explicit recipe of how to decouple independent components of the color code, highlighting the importance of colorability in the construction of the code. Moreover, for the $d$-dimensional color code with $d+1$ boundaries of $d+1$ distinct colors, we find that the code is equivalent to multiple copies of the $d$-dimensional toric code which are attached along a $(d-1)$-dimensional boundary. In particular, for $d=2$, we show that the (triangular) color code with boundaries is equivalent to the (folded) toric code with boundaries. We also find that the $d$-dimensional toric code admits logical non-Pauli gates from the $d$-th level of the Clifford hierarchy, and thus saturates the bound by Bravyi and K\\"{o}nig. In particular, we show that the $d$-qubit control-$Z$ logical gate can be fault-tolerantly implemented on the stack of $d$ copies of the toric code by a local unitary transformation.

  20. Why the Top Two Primary Fails California Voters

    E-Print Network [OSTI]

    Maviglio, Steven

    2015-01-01T23:59:59.000Z

    Why the Top Two Primary Fails California Voters Steven14, the proponents of the Top Two primary made some boldto voters. They said the Top Two would “reduce gridlock,” “

  1. Fail Safe Design for Large Capacity Lithium-ion Batteries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fail Safe Design for Large Capacity Lithium-ion Batteries NREL Commercialization & Tech Transfer Webinar March 27, 2011 Gi-Heon Kim gi-heon.kim@nrel.gov John Ireland, Kyu-Jin Lee,...

  2. Unconventional Color Superconductor

    E-Print Network [OSTI]

    Mei Huang

    2007-01-31T23:59:59.000Z

    Superfluidity or superconductivity with mismatched Fermi momenta appears in many systems such as charge neutral dense quark matter, asymmetric nuclear matter, and in imbalanced cold atomic gases. The mismatch plays the role of breaking the Cooper pairing, and the pair-breaking state cannot be properly described in the framework of standard BCS theory. I give a brief review on recent theoretical development in understanding unconventional color superconductivity, including gapless color superconductor, the chromomagnetic instabilities and the Higgs instability in the gapless phase. I also introduce a possible new framework for describing unconventional color superconductor.

  3. Realistic Haptic Rendering of Interacting Deformable Objects in Virtual Environments

    E-Print Network [OSTI]

    Duriez, Christian; Kheddar, Abderrahmane; Andriot, Claude

    2008-01-01T23:59:59.000Z

    A new computer haptics algorithm to be used in general interactive manipulations of deformable virtual objects is presented. In multimodal interactive simulations, haptic feedback computation often comes from contact forces. Subsequently, the fidelity of haptic rendering depends significantly on contact space modeling. Contact and friction laws between deformable models are often simplified in up to date methods. They do not allow a "realistic" rendering of the subtleties of contact space physical phenomena (such as slip and stick effects due to friction or mechanical coupling between contacts). In this paper, we use Signorini's contact law and Coulomb's friction law as a computer haptics basis. Real-time performance is made possible thanks to a linearization of the behavior in the contact space, formulated as the so-called Delassus operator, and iteratively solved by a Gauss-Seidel type algorithm. Dynamic deformation uses corotational global formulation to obtain the Delassus operator in which the mass and s...

  4. Multi-camera: interactive rendering of abstract digital images

    E-Print Network [OSTI]

    Smith, Jeffrey Statler

    2004-09-30T23:59:59.000Z

    Control................... 33 IV.3.DrawingOptions ...................... 36 IV.4.RenderingOptions ..................... 39 VRESULTS.............................. 40 V.1.DigitalPaintings ...................... 40 V.2.TraditionalMedia...................... 44 V.3.Animation... and methods related to a wide range of media to converge and be redefined through the adaptability and robustness of computer software. Hence, computer art has become an increasingly popular means of creative expression and experimentation. As computer...

  5. To appear in Graphics Interface 2009. Rendering Lunar Eclipses

    E-Print Network [OSTI]

    Cutler, Barb

    that the entire Moon pass into the umbra. Somewhat counter-intuitively, the umbral shadow is not entirely dark-colored eclipse. Very dark central shadow, while outer edge of umbra is relatively bright. L = 3 Brick-red eclipse

  6. Leu and Chen Page 1 December, 1997 Modelling and Rendering Graphics Scenes

    E-Print Network [OSTI]

    Grant, P. W.

    in a volume. The ray casting algorithms for volume rendering by Levoy [9] and Sabella [10] have generated much

  7. Feature Based Rendering for 2D/3D Partial Volume Segmentation Zigang Wang1

    E-Print Network [OSTI]

    Feature Based Rendering for 2D/3D Partial Volume Segmentation Datasets Zigang Wang1 and Zhengrong 11794, USA ABSTRACT In this paper, a new feature based rendering algorithm for partial volume is presented. This algorithm utilizes both surface and volume information for the rendering of the partial

  8. Vibrotactile colour rendering for the visually impaired within the VIDET project

    E-Print Network [OSTI]

    Ferri, Massimo

    Vibrotactile colour rendering for the visually impaired within the VIDET project Luca Cappelletti for the visually impaired. An important enhancement would be colour rendering. Here we face the possibility Association), who suggested to add colour rendering to VIDET. At first, we thought that a colour transducer

  9. Rendering of Environmental Force Feedback in Mobile Robot Teleoperation based on Fuzzy Logic

    E-Print Network [OSTI]

    Ryu, Jee-Hwan

    Rendering of Environmental Force Feedback in Mobile Robot Teleoperation based on Fuzzy Logic Ildar Farkhatdinov, Jee-Hwan Ryu and Jury Poduraev Abstract-- In this paper a study on rendering of environmen- tal to the distance between the obstacles and the mobile robot. In previous approaches force feedback was rendered

  10. Rendering Adaptation to Address Communication and Computation Constraints in Cloud Mobile Gaming

    E-Print Network [OSTI]

    California at San Diego, University of

    Rendering Adaptation to Address Communication and Computation Constraints in Cloud Mobile Gaming the responsibility of executing the gaming engines, including the most compute intensive tasks of graphic rendering imposed by the cost and availability of cloud servers. In this paper, we propose a rendering adaptation

  11. Ajax-based Report Pages as Incrementally Rendered UC San Diego

    E-Print Network [OSTI]

    Kowalczykowski, Stephen C.

    Ajax-based Report Pages as Incrementally Rendered Views Yupeng Fu UC San Diego yupeng/SQL for the database. The FORWARD framework simplifies the devel- opment of Ajax pages by treating them as rendered to the view and render the data in the browser. Such a declarative approach leads to significantly less code

  12. A Comparison of Spatial Subdivision Algorithms for SortFirst Rendering ?

    E-Print Network [OSTI]

    Aykanat, Cevdet

    A Comparison of Spatial Subdivision Algorithms for Sort­First Rendering ? Tahsin M. Kur¸c, H spatial subdivision heuristics for sort­first parallel graphics rendering on distributed­memory multicomputers. In sort­first rendering, image­ space, or screen, is divided into regions. Each processor

  13. Hardware Accelerated Point Rendering of Isosurfaces J. Andreas Brentzen Niels Jrgen Christensen

    E-Print Network [OSTI]

    Hardware Accelerated Point Rendering of Isosurfaces J. Andreas Bærentzen Niels Jørgen Christensen techniques, and in- teractive applications require fast generation and rendering of surface primitives technique for point scaling using distance attenuation which makes it possible to render points stored

  14. Interactive Translucent Volume Rendering and Procedural Modeling Simon Premoze Charles Hansen

    E-Print Network [OSTI]

    Kniss, Joe Michael

    Interactive Translucent Volume Rendering and Procedural Modeling Joe Kniss Simon Premoze¡ Charles rendered from a CT scan of a carp. Left: Blinn-Phong shading. Center and right: translucent volume shading. Abstract Direct volume rendering is a commonly used technique in visual- ization applications. Many

  15. Image-Based Rendering for Non-Diffuse Synthetic Scenes Dani Lischinski Ari Rappoport

    E-Print Network [OSTI]

    Rappoport, Ari

    Image-Based Rendering for Non-Diffuse Synthetic Scenes Dani Lischinski Ari Rappoport The Hebrew University Abstract. Most current image-based rendering methods operate under the assumption that all with image-based rendering of non-diffuse synthetic scenes. We introduce a new family of image-based scene

  16. Eurographics Symposium on Rendering (2006) Tomas Akenine-Mller and Wolfgang Heidrich (Editors)

    E-Print Network [OSTI]

    Jaffe, Jules

    2006-01-01T23:59:59.000Z

    Eurographics Symposium on Rendering (2006) Tomas Akenine-Möller and Wolfgang Heidrich (Editors) Reconstruction of Volumetric Surface Textures for Real-Time Rendering Sebastian Magda1 and David Kriegman2 1Univ technique for rendering rich 3-D detail when a polygonal surface representation would be ineffective

  17. Modeling and rendering heterogeneous fog in real-time using B-Spline wavelets

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Modeling and rendering heterogeneous fog in real-time using B-Spline wavelets Anthony Giroud method to render heterogeneous fog in real-time. The extinction function of our fog, related to its to obtain a decomposition in both space and frequency domains. A grid traversal is used to render the fog

  18. EngineRoom: A Comparative Development Environment For Volume Rendering Engines

    E-Print Network [OSTI]

    Mueller, Klaus

    - 1 - EngineRoom: A Comparative Development Environment For Volume Rendering Engines Michael A for comparative volume rendering, fast prototyping of system components, and teaching. Engine Room's manager-driven architecture is able to: (i) dynamically dock or link multiple third- party volume rendering engines

  19. TILTED LAYER-BASED MODELING FOR ENHANCED LIGHT-FIELD PROCESSING AND IMAGE BASED RENDERING

    E-Print Network [OSTI]

    Dragotti, Pier Luigi

    TILTED LAYER-BASED MODELING FOR ENHANCED LIGHT-FIELD PROCESSING AND IMAGE BASED RENDERING James, UK {j.pearson09, marcovs, mike.brookes, p.dragotti}@imperial.ac.uk ABSTRACT Image based rendering- torealistic results. However for successful rendering, geometric pri- ors about the structure of the scene

  20. Flexible Point-Based Rendering on Mobile Devices Florent Duguet and George Drettakis

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Flexible Point-Based Rendering on Mobile Devices Florent Duguet and George Drettakis REVES/INRIA Sophia-Antipolis, France, http://www-sop.inria.fr/reves Abstract Point-based rendering is a compact and efficient means of displaying complex geometry. Our goal is to enable flexible point-based rendering

  1. Large Scale Volume Rendering in Immersive Environments with Direct Manipulation Widgets

    E-Print Network [OSTI]

    Kniss, Joe Michael

    Large Scale Volume Rendering in Immersive Environments with Direct Manipulation Widgets Master's Thesis Proposal Joe Michael Kniss May 15, 2001 1 Introduction 1.1 Thesis Statement Parallel rendering exploration. 1.2 Motivation Direct volume rendering has proven to be an important visualization tool

  2. Dallas, August 18-22 Volume 20, Number 4, 1986 THE RENDERING EQUATION

    E-Print Network [OSTI]

    Frey, Pascal

    Dallas, August 18-22 Volume 20, Number 4, 1986 THE RENDERING EQUATION James T. Kajiya California variety of known rendering algorithms. In the course of discussing a monte carlo solutionwe alsopresent reduction. CR CATEGORIES: 1.3.3,1.3.5,1.3.7 1. The rendering equation The technique we present subsumes

  3. On Filtering the Noise from the Random Parameters in Monte Carlo Rendering

    E-Print Network [OSTI]

    Sen, Pradeep

    On Filtering the Noise from the Random Parameters in Monte Carlo Rendering PRADEEP SEN and SOHEIL DARABI UNM Advanced Graphics Lab Monte Carlo (MC) rendering systems can produce spectacular images from a small number of input samples. To do this, we treat the rendering system as a black box

  4. Rendering the Electromechanical Valve Actuator Globally Asymptotically Stable Katherine S. Peterson and Anna G. Stefanopoulou*

    E-Print Network [OSTI]

    Sontag, Eduardo

    Rendering the Electromechanical Valve Actuator Globally Asymptotically Stable Katherine S. Peterson on Sontag's feedback to render the electromechanical valve actuator (EVA) globally asymptotically stable on a linearized plant model. Here, we demonstrate and prove that our controller renders the system GAS without any

  5. Journal of Computer Graphics Techniques Higher Quality 2D Text Rendering

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Journal of Computer Graphics Techniques Higher Quality 2D Text Rendering Vol. 2, No. 1, 2013 http://jcgt.org Higher Quality 2D Text Rendering Nicolas P. Rougier INRIA Figure 1. When displaying text on low technology / Microsoft / native hinting) for crisp rendering or, to privilege glyph shapes (Quartz technology

  6. Hardware-Oriented Point-Based Rendering of Complex Scenes Liviu Coconu Hans-Christian Hege

    E-Print Network [OSTI]

    Andrzejak, Artur

    Hardware-Oriented Point-Based Rendering of Complex Scenes Liviu Coconu Hans-Christian Hege Abstract High quality point rendering methods have been developed in the last years. A common drawback of these approaches is the lack of hardware support. We propose a novel point rendering technique that yields good

  7. CLASSIFICATION OF BIOMEDICAL HIGH-RESOLUTION MICRO-CT IMAGES FOR DIRECT VOLUME RENDERING

    E-Print Network [OSTI]

    López-Sánchez, Maite

    CLASSIFICATION OF BIOMEDICAL HIGH-RESOLUTION MICRO-CT IMAGES FOR DIRECT VOLUME RENDERING Maite L,cerquide,davidm,anna}@maia.ub.es ABSTRACT This paper introduces a machine learning approach into the process of direct volume rendering that generates the classification func- tion within the optical property function used for rendering. Briefly

  8. To appear in the ACM SIGGRAPH conference proceedings Accurate Light Source Acquisition and Rendering

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    and Rendering Michael Goesele , Xavier Granier , Wolfgang Heidrich , Hans-Peter Seidel 1) MPI Informatik 2) The University of British Columbia Figure 1: Stages of light source measurement and rendering (from left to right and efficient rendering algorithms to deal with them. In this paper, we describe a processing pipeline

  9. Haptic rendering of rigid body collisions Daniela Constantinescu, Septimiu E. Salcudean, and Elizabeth A. Croft

    E-Print Network [OSTI]

    Constantinescu, Daniela

    Haptic rendering of rigid body collisions Daniela Constantinescu, Septimiu E. Salcudean@ece.ubc.ca, ecroft@mech.ubc.ca Abstract This paper addresses the haptic rendering of rigid body collisions. A new method is proposed in which collision rendering is achieved in two steps. First, the haptic simula- tion

  10. Perceptual Audio Rendering of Complex Virtual Environments Nicolas Tsingos, Emmanuel Gallo and George Drettakis

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Perceptual Audio Rendering of Complex Virtual Environments Nicolas Tsingos, Emmanuel Gallo and spatial clustering allows us to render such complex audio-visual scenes in real-time. Abstract We propose a real-time 3D audio rendering pipeline for complex virtual scenes containing hundreds of moving sound

  11. Layers for Effective Volume Rendering Sundaresan Raman, Oleg Mishchenko, and Roger Crawfis, Member, IEEE Computer Society

    E-Print Network [OSTI]

    Crawfis, Roger

    Layers for Effective Volume Rendering Sundaresan Raman, Oleg Mishchenko, and Roger Crawfis, Member, IEEE Computer Society Abstract--A multi-layer volume rendering framework is presented. The final image is obtained by compositing a number of renderings, each being represented as a separate layer. This layer

  12. Image-Based Modeling and Rendering Techniques: A Survey Manuel M. Oliveira1

    E-Print Network [OSTI]

    Oliveira, Manuel M.

    Image-Based Modeling and Rendering Techniques: A Survey Manuel M. Oliveira1 Resumo: A recente denominadas modelagem e rendering baseados em imagens (MRBI). Modelagem baseada em imagens se refere ao processo de utilização de imagens para reconstrução de modelos geométricos 3D. Rendering baseado em imagens

  13. TetSplat: Real-Time Rendering and Volume Clipping of Large Unstructured Tetrahedral Meshes

    E-Print Network [OSTI]

    TetSplat: Real-Time Rendering and Volume Clipping of Large Unstructured Tetrahedral Meshes Ken-resolution data representations. These compact hierarchical data structures are then adaptively rendered and probed in real-time on a commodity PC. Our point-based rendering algorithm, which is inspired by QSplat

  14. A NEW MULTIDIRECTIONAL EXTRAPOLATION HOLE-FILLING METHOD FOR DEPTH-IMAGE-BASED RENDERING

    E-Print Network [OSTI]

    Po, Lai-Man

    A NEW MULTIDIRECTIONAL EXTRAPOLATION HOLE-FILLING METHOD FOR DEPTH-IMAGE-BASED RENDERING Lai-Man Po School of Peking University, Shenzhen, China ABSTRACT Depth-Image-Based Rendering (DIBR) is widely used synthesis with high-quality depth map. Index Terms - Depth-Image-Based-Rendering, DIBR, Hole

  15. Image-Based Volume Rendering with Opacity Light Fields Miriah Meyer1

    E-Print Network [OSTI]

    Meyer, Miriah

    Image-Based Volume Rendering with Opacity Light Fields Miriah Meyer1 Hanspeter Pfister2 Charles hardware has proven valuable for volume rendering, large datasets continue to overwhelm the capabilities of the graphics cards, reducing the inter- activity of volume rendering utilizing such hardware. We present

  16. Energy-Based 6-DOF Penetration Depth Computation for Penalty-Based Haptic Rendering Algorithms

    E-Print Network [OSTI]

    Zefran, Milo?

    Energy-Based 6-DOF Penetration Depth Computation for Penalty-Based Haptic Rendering Algorithms Maxim Kolesnikov and Milos Zefran Abstract-- Existing penalty-based haptic rendering ap- proaches of rigid-body motions SE(3). We propose a penalty-based six-degrees-of-freedom (6-DOF) haptic rendering

  17. EUROGRAPHICS 2005 STAR State of The Art Report Verification of Physically Based Rendering Algorithms

    E-Print Network [OSTI]

    EUROGRAPHICS 2005 STAR ­ State of The Art Report Verification of Physically Based Rendering of predictive rendering is concerned with those methods of image synthesis which yield results that do not only the correctness of the results obtained by such techniques, three stages of such a rendering system have

  18. Use of Hybrid Rendering Styles for Presentation Roland Jesse Tobias Isenberg

    E-Print Network [OSTI]

    Use of Hybrid Rendering Styles for Presentation Roland Jesse Tobias Isenberg Department,isenberg}@isg.cs.uni-magdeburg.de ABSTRACT This paper presents hybrid rendering that combines the use of photorealistic and non-photorealistic rendering styles in the same image. This allows to extend the set of expression dimensions available

  19. A Review of Image-based Rendering Techniques Heung-Yeung Shum and Sing Bing Kang

    E-Print Network [OSTI]

    Pang, Alex

    A Review of Image-based Rendering Techniques Heung-Yeung Shum and Sing Bing Kang Microsoft Research hshum, sbkang¡ @microsoft.com Abstract In this paper, we survey the techniques for image-based rendering. Unlike traditional 3D computer graphics in which 3D geometry of the scene is known, image-based rendering

  20. Eurographics Symposium on Rendering (2007) Jan Kautz and Sumanta Pattanaik (Editors)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2007-01-01T23:59:59.000Z

    Eurographics Symposium on Rendering (2007) Jan Kautz and Sumanta Pattanaik (Editors) An Interactive Perceptual Rendering Pipeline using Contrast and Spatial Masking George Drettakis1 , Nicolas Bonneel1-Antipolis, 2University of Erlangen, 3CNRS-UPMC UMR 7593 Abstract We present a new perceptual rendering pipeline

  1. OIKOS 100: 311316, 2003 Hungry predators render predator-avoidance behavior in tadpoles

    E-Print Network [OSTI]

    Altwegg, Res

    OIKOS 100: 311­316, 2003 Hungry predators render predator-avoidance behavior in tadpoles ineffective Res Altwegg Altwegg, R. 2003. Hungry predators render predator-avoidance behavior in tadpoles render the behavioral responses in their prey ineffective. Nevertheless, most studies investigating

  2. To appear in the ACM SIGGRAPH conference proceedings Accurate Light Source Acquisition and Rendering

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    and Rendering Michael Goesele1) , Xavier Granier2) , Wolfgang Heidrich2) , Hans-Peter Seidel1) 1) MPI Informatik 2) The University of British Columbia Figure 1: Stages of light source measurement and rendering and efficient rendering algorithms to deal with them. In this paper, we describe a processing pipeline

  3. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS FOR VIDEO TECHNOLOGY 1 Video Stylization: Painterly Rendering and

    E-Print Network [OSTI]

    Zhu, Song Chun

    Rendering and Optimization with Content Extraction Liang Lin, Kun Zeng, Yizhou Wang, Ying-Qing Xu, Song rendering phase to select, place and propagate brush strokes for stylized animations based on the semantic method has the following three advantages: Firstly, we propose a two-pass rendering strategy and brush

  4. Adaptive Visuo-Haptic Rendering for Hybrid Modeling of Macromolecular Assemblies

    E-Print Network [OSTI]

    Wriggers, Willy

    Adaptive Visuo-Haptic Rendering for Hybrid Modeling of Macromolecular Assemblies Stefan Birmanns1-time load balancing of virtual reality and haptic render- ing. In structural biology a variety of image rendering. During critical load conditions the error metric of a dynamic mesh simplification technique

  5. Multi-view Rendering using GPU for 3-D Displays Francois de Sorbier

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Multi-view Rendering using GPU for 3-D Displays Franc¸ois de Sorbier Graduate School of Science content for stereoscopic and auto-stereoscopic displays requires to render a scene several times from slightly different viewpoints. In that case, maintaining real-time rendering can be a difficult goal

  6. PMR: Point to Mesh Rendering, A Feature-Based Approach Tamal K. Dey James Hudson

    E-Print Network [OSTI]

    Dey, Tamal Krishna

    PMR: Point to Mesh Rendering, A Feature-Based Approach Tamal K. Dey James Hudson The Ohio State. Point based rendering methods have been shown effective for this task. Building on this paradigm we introduce the PMR system which uses a hierarchy both in points and triangles for rendering. This hierarchy

  7. Image-Based Volume Rendering with Opacity Light Miriah Meyer, Hanspeter Pfister, Charles Hansen, Chris Johnson

    E-Print Network [OSTI]

    Utah, University of

    1 Image-Based Volume Rendering with Opacity Light Fields Miriah Meyer, Hanspeter Pfister, Charles valuable for volume rendering, large datasets continue to overwhelm the capabilities of the graphics cards, reducing the interactivity of volume rendering utilizing such hardware. We present a novel, image

  8. Thermal analysis of the failed equipment storage vault system

    SciTech Connect (OSTI)

    Jerrell, J.; Lee, S.Y.; Shadday, A.

    1995-07-01T23:59:59.000Z

    A storage facility for failed glass melters is required for radioactive operation of the Defense Waste Processing Facility (DWPF). It is currently proposed that the failed melters be stored in the Failed Equipment Storage Vaults (FESV`s) in S area. The FESV`s are underground reinforced concrete structures constructed in pairs, with adjacent vaults sharing a common wall. A failed melter is to be placed in a steel Melter Storage Box (MSB), sealed, and lowered into the vault. A concrete lid is then placed over the top of the FESV. Two melters will be placed within the FESV/MSB system, separated by the common wall. There is no forced ventilation within the vault so that the melter is passively cooled. Temperature profiles in the Failed Equipment Storage Vault Structures have been generated using the FLOW3D software to model heat conduction and convection within the FESV/MSB system. Due to complexities in modeling radiation with FLOW3D, P/THERMAL software has been used to model radiation using the conduction/convection temperature results from FLOW3D. The final conjugate model includes heat transfer by conduction, convection, and radiation to predict steady-state temperatures. Also, the FLOW3D software has been validated as required by the technical task request.

  9. Failed supernovae explain the compact remnant mass function

    SciTech Connect (OSTI)

    Kochanek, C. S. [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210, USAAND (United States); Center for Cosmology and AstroParticle Physics, The Ohio State University, 191 W. Woodruff Avenue, Columbus, OH 43210 (United States)

    2014-04-10T23:59:59.000Z

    One explanation for the absence of higher mass red supergiants (16.5 M {sub ?} ? M ? 25 M {sub ?}) as the progenitors of Type IIP supernovae (SNe) is that they die in failed SNe creating black holes. Simulations show that such failed SNe still eject their hydrogen envelopes in a weak transient, leaving a black hole with the mass of the star's helium core (5-8 M {sub ?}). Here we show that this naturally explains the typical masses of observed black holes and the gap between neutron star and black hole masses without any fine-tuning of stellar mass loss, binary mass transfer, or the SN mechanism, beyond having it fail in a mass range where many progenitor models have density structures that make the explosions more likely to fail. There is no difficulty including this ?20% population of failed SNe in any accounting of SN types over the progenitor mass function. And, other than patience, there is no observational barrier to either detecting these black hole formation events or limiting their rates to be well below this prediction.

  10. Compression and accelerated rendering of volume data using discrete wavelet transform

    E-Print Network [OSTI]

    Kamath, Preyas

    1998-01-01T23:59:59.000Z

    to faster iso-surface rendering. 28 FIGURE Page 18 19 20 Direction of transmission of a 2-D array of DWT cocfficients. Iso-surface rendered by using voxel size of 1. 6x1, 6x1, 5 mms. Iso-surface rendered by using voxel size of 4. 8x4. 4x4. 5 mms. 29... 32 21 Lso-surfsce rendered image with ROI around ear. 34 22 Iso-surface rendered image with ROI around nose. 34 CHAPTER I INTRODUCTION A. Background Medical volume visualization is increasingly becoming popular for planning of treat- ment...

  11. Optical surface resonance may render photonic crystals ineffective Florencio Garca-Santamara,* Erik C. Nelson, and Paul V. Braun

    E-Print Network [OSTI]

    Braun, Paul

    Optical surface resonance may render photonic crystals ineffective Florencio García crystals and render them ineffective. This surface resonance is dem- onstrated for two different 3D

  12. Book Reviews Why Evolution Works (and Creationism Fails)

    E-Print Network [OSTI]

    Book Reviews Why Evolution Works (and Creationism Fails) Reprinted with permission fromThe American and into the courtroom and still maintain the topic's integrity. Equally important is their method of presenting South Lewis High School Turin, NY 13473 mcomet@southlewis.org #12;

  13. The Voltan Application Programming Environment for Fail-silent Processes

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    1 The Voltan Application Programming Environment for Fail-silent Processes D. Black, C. Low and S Hewlett-Packard Research laboratories Bristol, BS12 6QZ, UK Abstract The Voltan software library for building distributed applications provides the support for (i) a process- pair to act as single Voltan self

  14. Computational Color ConstancyComputational Color Constancy R. Schettini

    E-Print Network [OSTI]

    Schettini, Raimondo

    vision system or as part of a digital camera's processing pipeline. #12;Adaptation Light Adaptation Adaptation: · Independent sensitivity regulation of the mechanisms of color vision. (Automatic Color Balance

  15. The Color Glass Condensate

    E-Print Network [OSTI]

    F. Gelis; E. Iancu; J. Jalilian-Marian; R. Venugopalan

    2010-02-01T23:59:59.000Z

    We provide a broad overview of the theoretical status and phenomenological applications of the Color Glass Condensate effective field theory describing universal properties of saturated gluons in hadron wavefunctions that are extracted from deeply inelastic scattering and hadron-hadron collision experiments at high energies.

  16. color palette sectionfive

    E-Print Network [OSTI]

    Derisi, Joseph

    ..........................................................................................53 #12;University of California, San Francisco | Public Affairs | Visual Identity Standards The UCSF color palettes.) When beginning any new design project, consult a professional graphic designer. On are hiring an outside professional graphic designer, ensure that the vendor has access to the UCSF Visual

  17. The Traveling Salesman Problem with Flexible Coloring

    E-Print Network [OSTI]

    Roemer, T. A.; Ahmadi, R.; Dasu, S.

    2011-01-01T23:59:59.000Z

    Salesman Problem with Flexible Coloring Thomas A. Roemer TheSalesman Problem with Flexible Colors (? ?? ?? ). We note,Salesman Problem with Flexible Colors (? ?? ?? ) can

  18. Efficient Resampling, Compression and Rendering of Metallic and Pearlescent Paint

    E-Print Network [OSTI]

    Behnke, Sven

    a complex, pure stochastic spatial structure and an- gular dependent color shifts. Hybrid approaches by measuring real paint sam- ples and split the data into a homogeneous (spatially invariant) part and slow decoding speed. The stochastic nature of the spatial and angular varia- tions of metallic paints

  19. Color in Nature Barb Cutler

    E-Print Network [OSTI]

    Durand, Frédo

    of organic dye) #12;Dyes and Stains · Mosses stained by iron and iodine · Elephants stained by mud · Bodily with water differently · Color permanence · Color availability changes · Synthetic pigments ­ First: Prussian

  20. To appear in the ACM APGV 2007 symposium proceedings Hybrid Image-/Model-Based Gaze-Contingent Rendering

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    -Contingent Rendering Hunter Murphy Andrew T. Duchowski School of Computing, Clemson University Figure 1: The original is displayed. Abstract A nonisotropic hybrid image-/model-based gaze-contingent render- ing technique utilizing: gpu, perceptual rendering, gaze-contingent rendering 1 Introduction The contributions of this paper

  1. Image indexing using color correlograms

    DOE Patents [OSTI]

    Huang, Jing (Ossining, NY); Kumar, Shanmugasundaram Ravi (San Jose, CA); Mitra, Mandar (Calcutta, IN); Zhu, Wei-Jing (Ossining, NY)

    2001-01-01T23:59:59.000Z

    A color correlogram is a three-dimensional table indexed by color and distance between pixels which expresses how the spatial correlation of color changes with distance in a stored image. The color correlogram may be used to distinguish an image from other images in a database. To create a color correlogram, the colors in the image are quantized into m color values, c.sub.i . . . c.sub.m. Also, the distance values k.epsilon.[d] to be used in the correlogram are determined where [d] is the set of distances between pixels in the image, and where dmax is the maximum distance measurement between pixels in the image. Each entry (i, j, k) in the table is the probability of finding a pixel of color c.sub.i at a selected distance k from a pixel of color c.sub.i. A color autocorrelogram, which is a restricted version of the color correlogram that considers color pairs of the form (i,i) only, may also be used to identify an image.

  2. School Conditions Will Continue to Earn Failing Grades

    E-Print Network [OSTI]

    Sonne, J. K.; Vieira, R. K.; Cummings, J. B.

    2006-01-01T23:59:59.000Z

    School Conditions Will Continue to Earn Failing Grades Jeffrey K. Sonne Senior Research Engineer Robin K. Vieira Director, Buildings Research Division Florida Solar Energy Center Cocoa, Florida James B. Cummings Program Manager ABSTRACT... This study addresses indoor air quality and general conditions problems in schools throughout the United States. Tools employed to investigate conditions include a nationwide, web-based survey, characterization of actual operating conditions in schools...

  3. Leveraging Inefficient and Failing Infrastructure to Accomplish Capital Improvements

    E-Print Network [OSTI]

    Mumper, M.; Taylor, C.

    2005-01-01T23:59:59.000Z

    , 3-wire. The generator operates in parallel with the utility. Generated power will be used on site and will not be sold back to the utility. Electrical switchgear and controls interface the generator with the existing power distribution system...Leveraging Inefficient and Failing Infrastructure to Accomplish Capital Improvements Mike Mumper, CPMM Carol Taylor Sales Representative Institutional Business Manager TAC-Abacus Hiram G. Andrews Center Harrisburg, PA Johnstown, PA...

  4. A nNon-photorealistic Model for Procedural Painterly Rendered Trees in the Style of Corot

    E-Print Network [OSTI]

    Losure, Michael Robert

    2009-05-15T23:59:59.000Z

    )............................................................................ 9 3 A screenshot from the painted world of ?The Elder Scrolls IV: Oblivion?............................................................... 12 4 Meier?s rendering pipeline ......................................................................... 13... look that avoids the 'gift-wrapped' look as well as the 'shower door' problem. Fig. 4 illustrates Meier's rendering pipeline. Particles are generated in world space on the surface of 3D geometry, and then rendered as brush strokes in image space...

  5. On-the-Fly Decompression and Rendering of Multiresolution Terrain

    SciTech Connect (OSTI)

    Lindstrom, P; Cohen, J D

    2009-04-02T23:59:59.000Z

    We present a streaming geometry compression codec for multiresolution, uniformly-gridded, triangular terrain patches that supports very fast decompression. Our method is based on linear prediction and residual coding for lossless compression of the full-resolution data. As simplified patches on coarser levels in the hierarchy already incur some data loss, we optionally allow further quantization for more lossy compression. The quantization levels are adaptive on a per-patch basis, while still permitting seamless, adaptive tessellations of the terrain. Our geometry compression on such a hierarchy achieves compression ratios of 3:1 to 12:1. Our scheme is not only suitable for fast decompression on the CPU, but also for parallel decoding on the GPU with peak throughput over 2 billion triangles per second. Each terrain patch is independently decompressed on the fly from a variable-rate bitstream by a GPU geometry program with no branches or conditionals. Thus we can store the geometry compressed on the GPU, reducing storage and bandwidth requirements throughout the system. In our rendering approach, only compressed bitstreams and the decoded height values in the view-dependent 'cut' are explicitly stored on the GPU. Normal vectors are computed in a streaming fashion, and remaining geometry and texture coordinates, as well as mesh connectivity, are shared and re-used for all patches. We demonstrate and evaluate our algorithms on a small prototype system in which all compressed geometry fits in the GPU memory and decompression occurs on the fly every rendering frame without any cache maintenance.

  6. Using wesBench to Study the Rendering Performance of Graphics Processing Units

    E-Print Network [OSTI]

    Bethel, Edward W.

    2010-01-01T23:59:59.000Z

    an NVIDIA Quadro FX 4500 graphics accelerator. The card is athe Rendering Performance of Graphics Processing Units E.January 8, 2010 Introduction Graphics operations consist of

  7. Using color photometry to separate transiting exoplanets from false positives

    E-Print Network [OSTI]

    B. Tingley

    2004-07-14T23:59:59.000Z

    The radial velocity technique is currently used to classify transiting objects. While capable of identifying grazing binary eclipses, this technique cannot reliably identify blends, a chance overlap of a faint background eclipsing binary with an ordinary foreground star. Blends generally have no observable radial velocity shifts, as the foreground star is brighter by several magnitudes and therefore dominates the spectrum, but their combined light can produce events that closely resemble those produced by transiting exoplanets. The radial velocity technique takes advantage of the mass difference between planets and stars to classify exoplanet candidates. However, the existence of blends renders this difference an unreliable discriminator. Another difference must therefore be utilized for this classification -- the physical size of the transiting body. Due to the dependence of limb darkening on color, planets and stars produce subtly different transit shapes. These differences can be relatively weak, little more than 1/10th the transit depth. However, the presence of even small color differences between the individual components of the blend increases this difference. This paper will show that this color difference is capable of discriminating between exoplanets and blends reliably, theoretically capable of classifying even terrestrial-class transits, unlike the radial velocity technique.

  8. Fail-safe storage rack for irradiated fuel rod assemblies

    DOE Patents [OSTI]

    Lewis, D.R.

    1993-03-23T23:59:59.000Z

    A fail-safe storage rack is provided for interim storage of spent but radioactive nuclear fuel rod assemblies. The rack consists of a checkerboard array of substantially square, elongate receiving tubes fully enclosed by a double walled container, the outer wall of which is imperforate for liquid containment and the inner wall of which is provided with perforations for admitting moderator liquid flow to the elongate receiving tubes, the liquid serving to take up waste heat from the stored nuclear assemblies and dissipate same to the ambient liquid reservoir. A perforated cover sealing the rack facilitates cooling liquid entry and dissipation.

  9. Analysis of failed ramps during the RHIC FY09 run

    SciTech Connect (OSTI)

    Minty, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2014-08-15T23:59:59.000Z

    The Relativistic Heavy Ion Collider (RHIC) is a versatile accelerator that supports operation with polarized protons of up to 250 GeV and ions with up to 100 GeV/nucleon. During any running period, various operating scenarios with different particle species, beam energies or accelerator optics are commissioned. In this report the beam commissioning periods for establishing full energy beams (ramp development periods) from the FY09 run are summarized and, for the purpose of motivating further developments, we analyze the reasons for all failed ramps.

  10. Fail-safe storage rack for irradiated fuel rod assemblies

    DOE Patents [OSTI]

    Lewis, Donald R. (Pocatello, ID)

    1993-01-01T23:59:59.000Z

    A fail-safe storage rack is provided for interim storage of spent but radioactive nuclear fuel rod assemblies. The rack consists of a checkerboard array of substantially square, elongate receiving tubes fully enclosed by a double walled container, the outer wall of which is imperforate for liquid containment and the inner wall of which is provided with perforations for admitting moderator liquid flow to the elongate receiving tubes, the liquid serving to take up waste heat from the stored nuclear assemblies and dissipate same to the ambient liquid reservoir. A perforated cover sealing the rack facilitates cooling liquid entry and dissipation.

  11. Fail Safe Design for Large Capacity Lithium-ion Batteries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget » FY 2014FacilitiesSheet 300OfficeFail Safe

  12. Color in architecture

    E-Print Network [OSTI]

    Vrooman, Richard

    1952-01-01T23:59:59.000Z

    declared that red light stimulated the movement of blood& blue light soothed it, Amulets and gems have been recorded as having protective and healing power accordin, to color, Amulets were preferred in this orders red? blue, yellow, green, white... much is tiring, Slushy Slue is serene, passive, cool. Spaniards and Venetians of the elite classes recognized the aloof di;city of blue and black in clothingi In the church, blue ca-e to s-~bolize sincerity and hope, Still used are the expressions...

  13. Approaching the exa-scale: a real-world evaluation of rendering extremely large data sets

    SciTech Connect (OSTI)

    Patchett, John M [Los Alamos National Laboratory; Ahrens, James P [Los Alamos National Laboratory; Lo, Li - Ta [Los Alamos National Laboratory; Browniee, Carson S [Los Alamos National Laboratory; Mitchell, Christopher J [Los Alamos National Laboratory; Hansen, Chuck [UNIV OF UTAH

    2010-10-15T23:59:59.000Z

    Extremely large scale analysis is becoming increasingly important as supercomputers and their simulations move from petascale to exascale. The lack of dedicated hardware acceleration for rendering on today's supercomputing platforms motivates our detailed evaluation of the possibility of interactive rendering on the supercomputer. In order to facilitate our understanding of rendering on the supercomputing platform, we focus on scalability of rendering algorithms and architecture envisioned for exascale datasets. To understand tradeoffs for dealing with extremely large datasets, we compare three different rendering algorithms for large polygonal data: software based ray tracing, software based rasterization and hardware accelerated rasterization. We present a case study of strong and weak scaling of rendering extremely large data on both GPU and CPU based parallel supercomputers using Para View, a parallel visualization tool. Wc use three different data sets: two synthetic and one from a scientific application. At an extreme scale, algorithmic rendering choices make a difference and should be considered while approaching exascale computing, visualization, and analysis. We find software based ray-tracing offers a viable approach for scalable rendering of the projected future massive data sizes.

  14. Noise-Based Volume Rendering for the Visualization of Multivariate Volumetric Data

    E-Print Network [OSTI]

    Tierny, Julien

    to meteorology and ge- ology require the analysis of such multivariate data and are in need of a comprehensiveNoise-Based Volume Rendering for the Visualization of Multivariate Volumetric Data Rostislav-velocity upstream (cyan). This is impossible with normal direct volume rendering (d). Abstract--Analysis

  15. Real-time, Photo-realistic, Physically Based Rendering of Fine Scale Human Skin Structure

    E-Print Network [OSTI]

    Haro, Antonio

    structure samples, build models of fine scale structure production, and then render this detail usingReal-time, Photo-realistic, Physically Based Rendering of Fine Scale Human Skin Structure Antonio, which is clearly visible in close-up shots in a film or game. Methods that rely on simple texture

  16. Multiple Image Warping for Remote Display of Rendered Images Thomas C. Hudson and William R. Mark

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    to provide immersion. Our render server constructs images and depth maps (``depth images'') and sends them be swamped by the cost of routing, especially along congested paths. Added to this is the rendering time can attack the latency problem. Historically, aggregate network bandwidth has increased rapidly

  17. Precomputed Radiance Transfer for Real-Time Rendering in Dynamic, Low-Frequency Lighting Environments

    E-Print Network [OSTI]

    O'Brien, James F.

    Precomputed Radiance Transfer for Real-Time Rendering in Dynamic, Low-Frequency Lighting a new, real-time method for rendering diffuse and glossy objects in low-frequency lighting environments-frequency incident lighting into transferred radiance which includes global effects like shadows and interreflections

  18. Method and system for rendering and interacting with an adaptable computing environment

    DOE Patents [OSTI]

    Osbourn, Gordon Cecil (Albuquerque, NM); Bouchard, Ann Marie (Albuquerque, NM)

    2012-06-12T23:59:59.000Z

    An adaptable computing environment is implemented with software entities termed "s-machines", which self-assemble into hierarchical data structures capable of rendering and interacting with the computing environment. A hierarchical data structure includes a first hierarchical s-machine bound to a second hierarchical s-machine. The first hierarchical s-machine is associated with a first layer of a rendering region on a display screen and the second hierarchical s-machine is associated with a second layer of the rendering region overlaying at least a portion of the first layer. A screen element s-machine is linked to the first hierarchical s-machine. The screen element s-machine manages data associated with a screen element rendered to the display screen within the rendering region at the first layer.

  19. In situ repair of a failed compression fitting

    DOE Patents [OSTI]

    Wolbert, R.R.; Jandrasits, W.G.

    1985-08-05T23:59:59.000Z

    A method and apparatus for the in situ repair of a failed compression fitting is provided. Initially, a portion of a guide tube is inserted coaxially in the bore of the compression fitting and locked therein. A close fit dethreading device is then coaxially mounted on the guide tube to cut the threads from the fitting. Thereafter, the dethreading device and guide tube are removed and a new fitting is inserted onto the dethreaded fitting with the body of the new fitting overlaying the dethreaded portion. Finally, the main body of the new fitting is welded to the main body of the old fitting whereby a new threaded portion of the replacement fitting is precisely coaxial with the old threaded portion. If needed, a bushing is located on the dethreaded portion which is sized to fit snugly between the dethreaded portion and the new fitting. Preferably, the dethreading device includes a cutting tool which is moved incrementally in a radial direction whereby the threads are cut from the threaded portion of the failed fitting in increments.

  20. In situ repair of a failed compression fitting

    DOE Patents [OSTI]

    Wolbert, Ronald R. (McKees Rocks, PA); Jandrasits, Walter G. (Pittsburgh, PA)

    1986-01-01T23:59:59.000Z

    A method and apparatus for the in situ repair of a failed compression fitg is provided. Initially, a portion of a guide tube is inserted coaxially in the bore of the compression fitting and locked therein. A close fit dethreading device is then coaxially mounted on the guide tube to cut the threads from the fitting. Thereafter, the dethreading device and guide tube are removed and a new fitting is inserted onto the dethreaded fitting with the body of the new fitting overlaying the dethreaded portion. Finally, the main body of the new fitting is welded to the main body of the old fitting whereby a new threaded portion of the replacement fitting is precisely coaxial with the old threaded portion. If needed, a bushing is located on the dethreaded portion which is sized to fit snugly between the dethreaded portion and the new fitting. Preferably, the dethreading device includes a cutting tool which is moved incrementally in a radial direction whereby the threads are cut from the threaded portion of the failed fitting in increments.

  1. Color Glass Condensate and Glasma

    E-Print Network [OSTI]

    Francois Gelis

    2010-09-06T23:59:59.000Z

    In this talk, I review the Color Glass Condensate theory of gluon saturation, and its application to the early stages of heavy ion collisions.

  2. How does color neutrality affect collective modes in color superconductors?

    E-Print Network [OSTI]

    Hiroaki Abuki; Tomáš Brauner

    2012-03-08T23:59:59.000Z

    We revisit the issue of color neutrality in effective model descriptions of dense quark matter based on global color symmetry. While the equilibrium thermodynamics of such models is now well understood, we examine the collective modes, focusing on the fluctuations of the order parameter. We point out that the constraint of color neutrality must be carefully generalized in order to obtain physically consistent and well-defined results. Particularly important is that the collective modes associated with order parameter fluctuations couple to charge density fluctuations in the neutral medium. We start by proving explicitly that, in contrast to claims made previously in literature, Nambu-Goldstone bosons of spontaneously broken global color symmetry remain exactly massless even after imposing the color neutrality constraint. As the next step, we make the argument general by using effective field theory. We then employ the high-density approximation to calculate the couplings in the effective Lagrangian and thus the Nambu-Goldstone boson dispersion relations.

  3. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1991-05-08T23:59:59.000Z

    This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  4. False color viewing device

    DOE Patents [OSTI]

    Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

    1992-01-01T23:59:59.000Z

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  5. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1992-10-20T23:59:59.000Z

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

  6. Where have all the colors gone: a metaphysical analysis of color

    E-Print Network [OSTI]

    Grimes, Sami Jae

    2002-01-01T23:59:59.000Z

    . Another color theory is dispositionalism, which states that color is the power an object is disposed to look like to certain perceivers in standard conditions. Both of these color theories are compatible with the intuition that our color experiences...

  7. Lugano, 12th November 2012 A supercomputer to understand the failing heart

    E-Print Network [OSTI]

    the failing heart Biventricular pacemakers fail to improve the faulty contraction of the diseased heart in thirty per cent of patients with heart failure. Together conduction system in the heart, which keeps the blood circulation going

  8. Detonating Failed Deflagration Model of Thermonuclear Supernovae I. Explosion Dynamics

    E-Print Network [OSTI]

    Tomasz Plewa

    2006-11-24T23:59:59.000Z

    We present a detonating failed deflagration model of Type Ia supernovae. In this model, the thermonuclear explosion of a massive white dwarf follows an off-center deflagration. We conduct a survey of asymmetric ignition configurations initiated at various distances from the stellar center. In all cases studied, we find that only a small amount of stellar fuel is consumed during deflagration phase, no explosion is obtained, and the released energy is mostly wasted on expanding the progenitor. Products of the failed deflagration quickly reach the stellar surface, polluting and strongly disturbing it. These disturbances eventually evolve into small and isolated shock-dominated regions which are rich in fuel. We consider these regions as seeds capable of forming self-sustained detonations that, ultimately, result in the thermonuclear supernova explosion. Preliminary nucleosynthesis results indicate the model supernova ejecta are typically composed of about 0.1-0.25 Msun of silicon group elements, 0.9-1.2 Msun of iron group elements, and are essentially carbon-free. The ejecta have a composite morphology, are chemically stratified, and display a modest amount of intrinsic asymmetry. The innermost layers are slightly egg-shaped with the axis ratio ~1.2-1.3 and dominated by the products of silicon burning. This central region is surrounded by a shell of silicon-group elements. The outermost layers of ejecta are highly inhomogeneous and contain products of incomplete oxygen burning with only small admixture of unburned stellar material. The explosion energies are ~1.3-1.5 10^51 erg.

  9. 1 Some researchers (see, for example, Saylor 1995) have suggested that illumination may only temporarily render some of the dye

    E-Print Network [OSTI]

    Crimaldi, John P.

    temporarily render some of the dye incapable of re-fluorescing. The aspect of reversibility in photo photobleaching, where some dye molecules are rendered incapable of fluorescing after being subjected to laser

  10. Brighter, More Colorful Colors and Darker, Deeper Colors Based on a

    E-Print Network [OSTI]

    Fairchild, Mark D.

    arrangement of flowers, a clear blue sky, and the glossy red lipstick of a beautiful lady-- are made brighter-- should be rendered as original while other features such as a blue sky on a crisp winter's day, a sunset) as the luminance of a chromatic stimulus approaches that of its surround. Beyond G0, the stimulus appears fluorent

  11. LED Color Stability: 10 Important Questions

    Broader source: Energy.gov [DOE]

    This April 15, 2014 webinar examined the causes of color shift, and took a look at existing metrics used to describe color shift/color stability in LED lighting. The lumen maintenance lifetime of...

  12. Environmental color for pediatric patient room design

    E-Print Network [OSTI]

    Park, Jin Gyu

    2009-05-15T23:59:59.000Z

    Color has a large impact on our psychological and physiological responses. This study examines the value of color as a component in a healing environment for pediatric patient rooms by measuring color preferences among healthy children, pediatric...

  13. On The Use of Eddy Current Brakes as Tunable, Fast Turn-On Viscous Dampers For Haptic Rendering

    E-Print Network [OSTI]

    Hayward, Vincent

    On The Use of Eddy Current Brakes as Tunable, Fast Turn-On Viscous Dampers For Haptic Rendering, linear dampers for haptic rendering using a prototype haptic device outfitted with eddy current brakes discuss the results from haptic experiments for rendering viscosity, virtual walls and virtual friction

  14. Preprint: Clip Art Rendering of Smooth Isosurfaces Accepted pending revision for IEEE Transactions on Visualization and Computer Graphics

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Preprint: Clip Art Rendering of Smooth Isosurfaces Accepted pending revision for IEEE with numerous renderings used to illustrate the paper itself. Index Terms-- particle systems, non-photorealistic rendering, line art drawing I. INTRODUCTION COMPUTER GRAPHICS is largely the study of com- putational tools

  15. Volume Rendering in a Virtual Environment Jrgen Schulze-Dbold, Uwe Wssner, Steffen P. Walz, Ulrich Lang

    E-Print Network [OSTI]

    Schulze, Jürgen P.

    Volume Rendering in a Virtual Environment Jürgen Schulze-Döbold, Uwe Wössner, Steffen P. Walz,woessner,walz,lang}@hlrs.de Abstract. This paper describes a flexible rendering system for scalar volume data which has been integrated into the visualization system COVISE. It allows direct volume rendering based on texture mapping hardware on both

  16. Rendering high dynamic range images Jeffrey M. DjC1o* d Brian A. Wande11'

    E-Print Network [OSTI]

    Wandell, Brian A.

    Rendering high dynamic range images Jeffrey M. DjC1o* d Brian A. Wande11' aDepment of Electrical that need to be rendered on devices with a relatively narrow intensity range. Figure 1 shows the location. In imaging applications, the image rendered on a display is rarely a precise physical match to the original

  17. IMMERSIVE SOUND RENDERING USING LASER-BASED TRACKING Panayiotis G. Georgiou, Athanasios Mouchtaris, Stergios I. Roumeliotis, Chris Kyriakakis

    E-Print Network [OSTI]

    Roumeliotis, Stergios I.

    IMMERSIVE SOUND RENDERING USING LASER-BASED TRACKING Panayiotis G. Georgiou, Athanasios Mouchtaris behind the spatial sound renderer built at the University of Southern California's Immersive Audio Laboratory. In creating this sound rendering system, we were faced with three main challenges. First

  18. Volume rendering at interactive frame rates remains a chal-lenge, especially with today's increasingly large datasets. We pro-

    E-Print Network [OSTI]

    Crawfis, Roger

    Abstract Volume rendering at interactive frame rates remains a chal- lenge, especially with today's increasingly large datasets. We pro- pose a framework, using concepts from Image-Based Rendering (IBR), that decreases the required framerate for the volume ren- derer significantly. All the volume renderer needs

  19. Improving Rendering Performance by Texture-Map-Based Triangle Strips Yu Yang, Tulika Mitra and Huang Zhiyong

    E-Print Network [OSTI]

    Huang, Zhiyong

    Improving Rendering Performance by Texture-Map-Based Triangle Strips Yu Yang, Tulika Mitra, Singapore 117543) Abstract Improving the rendering performance is a basic problem for computer graphics system. In this paper, we are aiming to investigate the impact on the rendering performance of some

  20. Volume rendering at interactive frame rates remains a chal-lenge, especially with today's increasingly large datasets. We pro-

    E-Print Network [OSTI]

    Mueller, Klaus

    1 Abstract Volume rendering at interactive frame rates remains a chal- lenge, especially with today's increasingly large datasets. We pro- pose a framework, using concepts from Image-Based Rendering (IBR), that decreases the required framerate for the volume ren- derer significantly. All the volume renderer needs

  1. People of Color and Disenfranchised Communities Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    People of Color and Disenfranchised Communities Environmental Health Network (the Coalition) People of Color and Disenfranchised Communities Environmental Health Network (the...

  2. Multiresolution Techniques for Interactive Texture-Based Rendering of Arbitrarily Oriented Cutting Planes

    SciTech Connect (OSTI)

    LaMar, E; Duchaineau, M A; Hamann, B; Joy, K I

    2001-10-03T23:59:59.000Z

    We present a multiresolution technique for interactive texture based rendering of arbitrarily oriented cutting planes for very large data sets. This method uses an adaptive scheme that renders the data along a cutting plane at different resolutions: higher resolution near the point-of-interest and lower resolution away from the point-of-interest. The algorithm is based on the segmentation of texture space into an octree, where the leaves of the tree define the original data and the internal nodes define lower-resolution versions. Rendering is done adaptively by selecting high-resolution cells close to a center of attention and low-resolution cells away from it. We limit the artifacts introduced by this method by blending between different levels of resolution to produce a smooth image. This technique can be used to produce viewpoint-dependent renderings.

  3. T-532: Vulnerability in Graphics Rendering Engine Could Allow Remote Code Execution

    Broader source: Energy.gov [DOE]

    Microsoft is investigating new public reports of a vulnerability in the Windows Graphics Rendering Engine. An attacker who successfully exploited this vulnerability could run arbitrary code in the security context of the logged-on user.

  4. Lexicalisation Patterns of Rendering Path Descriptions in Polish Translation from English

    E-Print Network [OSTI]

    Ch?opek, Dorota

    2012-02-01T23:59:59.000Z

    with constructions lexicalising precise path through satellites, Polish translation renders the path, neutralises it, changes it, or omits the path conveyed by the original version, which is illustrated by this paper....

  5. Real-time rendering of physically-based cloud simulations for university undergraduate research fellows

    E-Print Network [OSTI]

    Walkington, Kevin Michael

    2013-02-22T23:59:59.000Z

    of cloud formation and existence on current commercially-available computers. One of the challenges associated with this simulation is its display onto a computer screen, often referred to as rendering. We will present a brief overview of existing cloud...

  6. Eurographics Symposium on Rendering 2003 Per Christensen and Daniel Cohen-Or (Editors)

    E-Print Network [OSTI]

    Utah, University of

    for quickly rendering soft shadows are needed. Shadows consist of two parts, an umbra and a penumbra. Umbral- proach breaks down when the umbra region significantly de- creases or disappears. This happens for very

  7. Too Big to Fail in the Local Group

    E-Print Network [OSTI]

    Garrison-Kimmel, Shea; Bullock, James S; Kirby, Evan N

    2014-01-01T23:59:59.000Z

    We compare the dynamical masses of dwarf galaxies in the Local Group (LG) to the predicted masses of halos in the ELVIS suite of $\\Lambda$CDM simulations, a sample of 48 Galaxy-size hosts, 24 of which are in paired configuration similar to the LG. We enumerate unaccounted-for dense halos ($V_\\mathrm{max} \\gtrsim 25$ km s$^{-1}$) in these volumes that at some point in their histories were massive enough to have formed stars in the presence of an ionizing background ($V_\\mathrm{peak} > 30$ km s$^{-1}$). Within 300 kpc of the Milky Way, the number of unaccounted-for massive halos ranges from 2 - 25 over our full sample. Moreover, this "too big to fail" count grows as we extend our comparison to the outer regions of the Local Group: within 1.2 Mpc of either giant we find that there are 12-40 unaccounted-for massive halos. This count excludes volumes within 300 kpc of both the MW and M31, and thus should be largely unaffected by any baryonically-induced environmental processes. According to abundance matching -- s...

  8. Proceedings IEEE Visualization '99, pages 291298, cIEEE Computer Society Press, 1999. LOD-Sprite Technique for Accelerated Terrain Rendering

    E-Print Network [OSTI]

    Swan II, J. Edward

    -Sprite Technique for Accelerated Terrain Rendering Baoquan Chen½ SUNY at Stony Brook J. Edward Swan II¾ Naval rendering technique, termed LOD-sprite render- ing, which uses a combination of a level-of-detail (LOD) represen- tation of the scene together with reusing image sprites (previously rendered images). Our primary

  9. Local intelligent electronic device (IED) rendering templates over limited bandwidth communication link to manage remote IED

    DOE Patents [OSTI]

    Bradetich, Ryan; Dearien, Jason A; Grussling, Barry Jakob; Remaley, Gavin

    2013-11-05T23:59:59.000Z

    The present disclosure provides systems and methods for remote device management. According to various embodiments, a local intelligent electronic device (IED) may be in communication with a remote IED via a limited bandwidth communication link, such as a serial link. The limited bandwidth communication link may not support traditional remote management interfaces. According to one embodiment, a local IED may present an operator with a management interface for a remote IED by rendering locally stored templates. The local IED may render the locally stored templates using sparse data obtained from the remote IED. According to various embodiments, the management interface may be a web client interface and/or an HTML interface. The bandwidth required to present a remote management interface may be significantly reduced by rendering locally stored templates rather than requesting an entire management interface from the remote IED. According to various embodiments, an IED may comprise an encryption transceiver.

  10. From a Failed-Growth Economy to a Steady-State Economy

    E-Print Network [OSTI]

    Zaferatos, Nicholas C.

    From a Failed-Growth Economy to a Steady-State Economy By Herman Daly A steady-state economy of negative growth, a depression such as we are entering now, is a failed-growth economy, not a steady-state economy. Halting an accelerating downward spiral is necessary but is not the same thing as resuming

  11. Polynomials associated with graph coloring and orientations

    E-Print Network [OSTI]

    Humpert, Brandon Eugene

    2011-04-26T23:59:59.000Z

    We study colorings and orientations of graphs in two related contexts. Firstly, we generalize Stanley's chromatic symmetric function using the k-balanced colorings of Pretzel to create a new graph invariant. We show that ...

  12. Real-time Rendering of Complex Vector Data on 3d Terrain Models

    E-Print Network [OSTI]

    Behnke, Sven

    Real-time Rendering of Complex Vector Data on 3d Terrain Models M. Schneider, M. Guthe, and R of buildings, streets and runway (from left to right). Abstract. In this paper we present a hybrid technique model. The first part of this hybrid technique is a texture-based approach that is especially suited

  13. Nonphotorealistic Rendering in Scientific Visualization Christopher G. Healey, Victoria Interrante, davidkremers, David Laidlaw, Penny Rheingans

    E-Print Network [OSTI]

    Laidlaw, David

    Nonphotorealistic Rendering in Scientific Visualization Christopher G. Healey, Victoria Interrante, davidkremers, David Laidlaw, Penny Rheingans Course #32 SIGGRAPH 2001 Los Angeles, California August 12, and has lectured in course at SIGGRAPH 98 and 99. Dr. Victoria Interrante is an Assistant Professor

  14. A Practical Framework for Sharing and Rendering Real-World Bidirectional

    E-Print Network [OSTI]

    -world materials has been hindered by a lack of standards for sharing and interpreting measured data. This paper.We also present an advanced interpolation method to reduce measured data into these standard scattering off surfaces is critical to realism for computer graphics and physically-based rendering. While

  15. Web-based Stereo Rendering for Visualization and Annotation of Scientific Volumetric Data

    E-Print Network [OSTI]

    Eng, Daniel C.

    2010-01-16T23:59:59.000Z

    that facilitate the viewing of large collections of images. Google Maps and Google Maps-like interfaces such as Brainmaps.org allow users to pan and zoom 2D images efficiently. However, they do not yet support the rendering of volumetric data in their standard web...

  16. A Perceptual Study on Haptic Rendering of Surface Topography when Both Surface Height and Stiffness Vary

    E-Print Network [OSTI]

    Tan, Hong Z.

    A Perceptual Study on Haptic Rendering of Surface Topography when Both Surface Height and Stiffness of surface topography when both surface height and surface stiffness vary. Three psychophysical experiments of haptic virtual environments. 1 Introduction How do people perceive the surface topography1 of a virtual

  17. The svgl toolkit: enabling fast rendering of rich 2D graphics Stephane Conversy1,2

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The svgl toolkit: enabling fast rendering of rich 2D graphics St´ephane Conversy1,2 Jean powerful graphical processors be- come available on mainstream computers, it becomes possible , a graphical toolkit that enables programmers and design- ers of interactive applications to benefit from

  18. Implementing the Render Cache and the Edge-and-Point Image On Graphics Hardware

    E-Print Network [OSTI]

    Keinan, Alon

    Implementing the Render Cache and the Edge-and-Point Image On Graphics Hardware Edgar Vel University Bruce Walter Program of Computer Graphics Cornell University Kavita Bala Department of Computer these techniques by utilizing programmable graphics process- ing units (GPUs) to achieve better framerates while

  19. Volume Rendering with Animation of Gulf Stream Currents David Ehrens Ramprasad Balasubramanian

    E-Print Network [OSTI]

    Schulze, Jürgen P.

    for the visualization of MICOM oceanographic data and the tracking of mesoscale eddies. We present methods for gen mesoscale eddies from any angle, including an undersea aspect, over any duration, and by combinations rendering tool, to visualize Gulf Stream MICOM oceanographic data, mesoscale coherent structures like jets

  20. Eurographics Symposium on Rendering (2007) Jan Kautz and Sumanta Pattanaik (Editors)

    E-Print Network [OSTI]

    Columbia University

    2007-01-01T23:59:59.000Z

    .g., wood and brick), smooth (e.g., marble and glass), flexible (e.g., silk and paper), and miscellaneous (e as water drops falling from large heights such as windowsills, trees, and rooftops. 1. Introduction. This is particu- larly crucial when rendering rain, where lack of interaction of falling drops with scene elements

  1. High Quality Interactive Rendering of Massive Point Models using Multi-way Prashant Goswami

    E-Print Network [OSTI]

    Pajarola, Renato B.

    construction and high quality visu- alization of large point datasets. The method introduces a novel process can easily lead to starvation of the graphics pipeline. Hence the CPU-GPU bottleneck becomes and rendering the models, to the design of the display algorithm. In recent years, this consideration has lead

  2. Ratio model serves suprathreshold color luminance discrimination

    E-Print Network [OSTI]

    Mullen, Kathy T.

    Ratio model serves suprathreshold color­ luminance discrimination Marcel J. Sankeralli and Kathy T quadrants of the red­ green/luminance and blue­yellow/luminance planes of cardinal color space. We showed model of suprathreshold color­luminance dis- crimination, in which discrimination depends on a ratio

  3. Spatial Vision Sensitivity to Color Variations

    E-Print Network [OSTI]

    Majumder, Aditi

    ;Sensitivity to Color Variations · Why is sunlit sky blue? · Why is sunrise/sunset red? 2 #12;Color vision with luminance contrast 6 #12;Pure Color Gratings · Differences in the cone responses to the same patterns a pattern which varies in chromaticity but which is constant in luminance across its extent · Inphase

  4. Color Printer Characterization Adjustment for Different

    E-Print Network [OSTI]

    Sharma, Gaurav

    is often implemented as a 3D look-up table that maps from a device independent color space (e.g. CIELAB by printing a number of color patches with known device control values, measuring the colors obtained-uniformity). Typically, the impact of these factors is minimized through careful design of the printing system. However

  5. Menghua Wang NOAA STAR Ocean Color Team

    E-Print Network [OSTI]

    .g., BOUSSOLE, Chesapeake Bay, etc., will be added) Regional ocean color EDR monitoring Hawaii South PacificLw551, and nLw671. #12;VIIRS ocean color EDR regional time- series monitoring at South Pacific Gyre (SPG) #12;Online interactive plot of SPG time-series #12;Global deep-water (>1000 m) ocean color EDR

  6. Preserving the Colors of Early Cinema

    E-Print Network [OSTI]

    Zanibbi, Richard

    Preserving the Colors of Early Cinema through the Davide Turconi Film Frame Collection Joshua of Chicago 4pm Wed, Sept. 27 Auditorium of the Center for Imaging Science While most surviving silent films as well as Kinetoscope films were colored. Color has thus existed in the cinema since its inception, yet

  7. Color Matching for PlasticsColor Matching for Plastics Bill CheethamBill Cheetham

    E-Print Network [OSTI]

    Watson, Ian

    1 Color Matching for PlasticsColor Matching for Plastics Bill CheethamBill Cheetham GeneralIndustrial Systems Information ServicesInformation Services Medical SystemsMedical Systems PlasticsPlastics Power Electric Global Research Applications ­ GE Plastics · FormTool - lab color matching tool · Color

  8. Using wesBench to Study the Rendering Performance of Graphics Processing Units

    SciTech Connect (OSTI)

    Bethel, Edward W

    2010-01-08T23:59:59.000Z

    Graphics operations consist of two broad operations. The first, which we refer to here as vertex operations, consists of transformation, lighting, primitive assembly, and so forth. The second, which we refer to as pixel or fragment operations, consist of rasterization, texturing, scissoring, blending, and fill. Overall GPU rendering performance is a function of throughput of both these interdependent stages: if one stage is slower than the other, the faster stage will be forced to run more slowly and overall rendering performance will be adversely affected. This relationship is commutative: if the later stage has a greater workload than the earlier stage, the earlier stage will be forced to 'slow down.' For example, a large triangle that covers many screen pixels will incur a very small amount of work in the vertex stage while at the same time incurring a relatively large amount of work in the fragment stage. Rendering performance of a scene consisting of many large-area triangles will be limited by throughput of the fragment stage, which will have relatively more work than the vertex stage. There are two main objectives for this document. First, we introduce a new graphics benchmark, wesBench, which is useful for measuring performance of both stages of the rendering pipeline under varying conditions. Second, we present its methodology for measuring performance and show results of several performance measurement studies aimed at producing better understanding of GPU rendering performance characteristics and limits under varying configurations. First, in Section 2, we explore the 'crossover' point between geometry and rasterization. Second, in Section 3, we explore additional performance characteristics, some of which are ill- or un-documented. Lastly, several appendices provide additional material concerning problems with the gfxbench benchmark, and details about the new wesBench graphics benchmark.

  9. Department of Computer Science University of North Carolina at Chapel Hill February 2004 MMR: Massive Model Rendering System

    E-Print Network [OSTI]

    Whitton, Mary C.

    or action. · Scalability. The system should require a human set-up that is at most sublinear in the number-time rendering system. Figure 1. A view of our 15-million polygon model of a coal-fired power plant. The MMR: Massive Model Rendering System The Challenge Overview. Computer-aided design (CAD) applications

  10. Applications of color powder paint in the automotive industry

    E-Print Network [OSTI]

    Barberich, Bevin, 1975-

    2004-01-01T23:59:59.000Z

    Both color keyed and color specific liquid primers have been used successfully in automotive paint application, reducing the use of costly topcoat materials. Generally, color keyed primer is close in color to the topcoat ...

  11. Color Glass Condensate and Glasma

    E-Print Network [OSTI]

    F. Gelis

    2012-11-26T23:59:59.000Z

    We review the Color Glass Condensate effective theory, that describes the gluon content of a high energy hadron or nucleus, in the saturation regime. The emphasis is put on applications to high energy heavy ion collisions. After describing initial state factorization, we discuss the Glasma phase, that precedes the formation of an equilibrated quark-gluon plasma. We end this review with a presentation of recent developments in the study of the isotropization and thermalization of the quark-gluon plasma.

  12. Overview of Crystalline Color Superconductors

    E-Print Network [OSTI]

    Mannarelli, Massimo

    2015-01-01T23:59:59.000Z

    Inhomogeneous phases may appear when a stress is applied to a system and the system can minimize the free energy breaking the rotational invariance. Various examples are known in Nature of this sort, as the paramagnetic to ferromagnetic phase transition, or the fluid/solid phase transition. If the rotational symmetry is broken down to a discrete symmetry, the system is typically named a crystal. We breifly review crystalline color superconductors, which arise in cold quark matter with mismatched Fermi spheres.

  13. render safe

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved:AdministrationAnalysisDarby Dietrich57/%2A0/%2A en4/%2A en9/%2A en

  14. Morpes: A Model for Personalized Rendering of Web Content on Mobile Devices

    E-Print Network [OSTI]

    Kuppusamy, K S; 10.5121/ijfcst.2012.2204

    2012-01-01T23:59:59.000Z

    With the tremendous growth in the information communication sector, the mobile phones have become the prime information communication devices. The convergence of traditional telephony with the modern web enabled communication in the mobile devices has made the communication much effective and simpler. As mobile phones are becoming the crucial source of accessing the contents of the World Wide Web which was originally designed for personal computers, has opened up a new challenge of accommodating the web contents in to the smaller mobile devices. This paper proposes an approach towards building a model for rendering the web pages in mobile devices. The proposed model is based on a multi-dimensional web page segment evaluation model. The incorporation of personalization in the proposed model makes the rendering user-centric. The proposed model is validated with a prototype implementation.

  15. NLO evolution of color dipoles

    SciTech Connect (OSTI)

    Ian Balitsky; Giovanni Chirilli

    2008-01-01T23:59:59.000Z

    The small-x deep inelastic scattering in the saturation region is governed by the non-linear evolution of Wilson-lines operators. In the leading logarithmic approximation it is given by the BK equation for the evolution of color dipoles. In the next-to-leaing order the BK equation gets contributions from quark and gluon loops as well as from the tree gluon diagrams with quadratic and cubic nonlinearities. We calculate the gluon contribution to small-x evolution of Wilson lines (the quark part was obtained earlier).

  16. NLO evolution of color dipoles

    E-Print Network [OSTI]

    Ian Balitsky; Giovanni A. Chirilli

    2007-10-23T23:59:59.000Z

    The small-$x$ deep inelastic scattering in the saturation region is governed by the non-linear evolution of Wilson-line operators. In the leading logarithmic approximation it is given by the BK equation for the evolution of color dipoles. In the next-to-leading order the BK equation gets contributions from quark and gluon loops as well as from the tree gluon diagrams with quadratic and cubic nonlinearities. We calculate the gluon contribution to small-x evolution of Wilson lines (the quark part was obtained earlier).

  17. DOE CALiPER Program, Report 20.1 Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps

    SciTech Connect (OSTI)

    Royer, Michael P.; Poplawski, Michael E.; Miller, Naomi J.

    2013-10-01T23:59:59.000Z

    This report focuses on human-evaluated characteristics, including beam quality, shadow quality, and color quality. Using a questionnaire that included rank ordering, opinions on 27 of the Report 20 PAR38 lamps were gathered during a demonstration event for members of the local Illuminating Engineering Society (IES) chapter. This was not a rigorous scientific experiment, and the data should not be extrapolated beyond the scope of the demonstration. The results suggest that many of the LED products compared favorably to halogen PAR38 benchmarks in all attributes considered. LED lamps using a single-emitter design were generally preferred for their beam quality and shadow quality, and the IES members ranking of color quality did not always match the rank according to the color rendering index (CRI).

  18. Neutral sphingomyelinase inhibition participates to the benefits of N-acetylcysteine treatment in post-myocardial infarction failing heart rats

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    treatment in post- myocardial infarction failing heart rats Christophe ADAMY1,2,9 , Paul MULDER3,4,9 , Lara-MI failing heart rat Key words: chronic heart failure; glutathione; N-acetylcysteine; neutral, we showed that the left ventricle (LV) of human failing heart was depleted in total glutathione by 54

  19. Information on Taxation of University of Minnesota Non-compensatory Fellowship Stipends A scholarship/fellowship payment that is made without any regard for services rendered is non-

    E-Print Network [OSTI]

    Amin, S. Massoud

    A scholarship/fellowship payment that is made without any regard for services rendered is non- compensatory

  20. 3D-Audio Matting, Post-editing and Re-rendering from Field Recordings Emmanuel Gallo1,2, Nicolas Tsingos1 and Guillaume Lemaitre1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    3D-Audio Matting, Post-editing and Re-rendering from Field Recordings Emmanuel Gallo1,2, Nicolas components through time. Right: This high-level representation allows for post-editing and re-rendering the acquired soundscape within generic 3D-audio rendering architectures. Abstract We present a novel approach

  1. Appears in Proceedings of IEEE Visualization '00 (October 2000, Salt Lake City, UT), IEEE Computer Society Press, pp. Volume Illustration: Non-Photorealistic Rendering of Volume Models

    E-Print Network [OSTI]

    Adali, Tulay

    Society Press, pp. 195-202. Volume Illustration: Non-Photorealistic Rendering of Volume Models David Ebert the structure of a volume model is a problem not fully solved by existing volume rendering approaches. Physics-based volume rendering approaches create images which may match the appearance of translucent materials

  2. Progressive Perceptual Audio Rendering of Complex Scenes Thomas Moeck1,2 Nicolas Bonneel1 Nicolas Tsingos1 George Drettakis1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Progressive Perceptual Audio Rendering of Complex Scenes Thomas Moeck1,2 Nicolas Bonneel1 Nicolas sound sources. Audio is rendered in realtime with our progressive lossy processing technique using 15 and per- ceptual auditory masking, high quality rendering of complex virtual scenes with thousands

  3. 1092 IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS FOR VIDEO TECHNOLOGY, VOL. 13, NO. 11, NOVEMBER 2003 Multi-View Coding for Image-Based Rendering

    E-Print Network [OSTI]

    Girod, Bernd

    Multi-View Coding for Image-Based Rendering Using 3-D Scene Geometry Marcus Magnor, Member, IEEE the large amount of image data necessary for Image-based Rendering (IBR), efficient coding schemes. Index Terms--Geometry coding, image-based rendering (IBR), light field compression, model-based coding

  4. Efficient Decoding of Topological Color Codes

    E-Print Network [OSTI]

    Pradeep Sarvepalli; Robert Raussendorf

    2011-11-03T23:59:59.000Z

    Color codes are a class of topological quantum codes with a high error threshold and large set of transversal encoded gates, and are thus suitable for fault tolerant quantum computation in two-dimensional architectures. Recently, computationally efficient decoders for the color codes were proposed. We describe an alternate efficient iterative decoder for topological color codes, and apply it to the color code on hexagonal lattice embedded on a torus. In numerical simulations, we find an error threshold of 7.8% for independent dephasing and spin flip errors.

  5. Modular architecture of isospin, color, and generation

    E-Print Network [OSTI]

    David Ritz Finkelstein

    2014-12-22T23:59:59.000Z

    Starting from the vacuum, iterated Grassmann-algebra formation consecutively introduces vector spaces and groups with the structure first of charge, then of isospin, then of color.

  6. ColorFull -- a C++ library for calculations in SU(Nc) color space

    E-Print Network [OSTI]

    Malin Sjodahl

    2014-12-12T23:59:59.000Z

    ColorFull, a C++ package for treating QCD color structure, is presented. ColorFull, which utilizes the trace basis approach, is intended for interfacing with event generators, but can also be used as a stand-alone package for squaring QCD amplitudes, calculating interferences, and describing the effect of gluon emission and gluon exchange.

  7. ColorFull -- a C++ library for calculations in SU(Nc) color space

    E-Print Network [OSTI]

    Malin Sjodahl

    2015-06-29T23:59:59.000Z

    ColorFull, a C++ package for treating QCD color structure, is presented. ColorFull, which utilizes the trace basis approach, is intended for interfacing with event generators, but can also be used as a stand-alone package for squaring QCD amplitudes, calculating interferences, and describing the effect of gluon emission and gluon exchange.

  8. Sum rule description of color transparency

    SciTech Connect (OSTI)

    Frankfurt, L. (National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, Michigan 48824 (United States)); Greenberg, W.R.; Miller, G.A. (Physics Department, FM-15, University of Washington, Seattle, Washington 98195 (United States)); Strikman, M. (Department of Physics, Pennsylvania State University, University Park, Pennsylvania 16802 (United States))

    1992-12-01T23:59:59.000Z

    The assumption that a small pointlike configuration does not interact with nucleons leads to a new set of sum rules that are interpreted as models of the baryon-nucleon interaction. These models are rendered semirealistic by requiring consistency with data for cross section fluctuations in proton-proton diffractive collisions.

  9. Fail Save Shut Off Valve for Filtering Systems Employing Candle Filters

    DOE Patents [OSTI]

    VanOsdol, John

    2006-01-03T23:59:59.000Z

    The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

  10. Fail save shut off valve for filtering systems employing candle filters

    DOE Patents [OSTI]

    VanOsdol, John (Fairmont, WV)

    2006-01-03T23:59:59.000Z

    The invention relates to an apparatus that acts as a fail save shut off valve. More specifically, the invention relates to a fail save shut off valve that allows fluid flow during normal operational conditions, but prevents the flow of fluids in the event of system failure upstream that causes over-pressurization. The present invention is particularly well suited for use in conjunction with hot gas filtering systems, which utilize ceramic candle filters. Used in such a hot gas system the present invention stops the flow of hot gas and prevents any particulate laden gas from entering the clean side of the system.

  11. Two-color infrared detector

    DOE Patents [OSTI]

    Klem, John F; Kim, Jin K

    2014-05-13T23:59:59.000Z

    A two-color detector includes a first absorber layer. The first absorber layer exhibits a first valence band energy characterized by a first valence band energy function. A barrier layer adjoins the first absorber layer at a first interface. The barrier layer exhibits a second valence band energy characterized by a second valence band energy function. The barrier layer also adjoins a second absorber layer at a second interface. The second absorber layer exhibits a third valence band energy characterized by a third valence band energy function. The first and second valence band energy functions are substantially functionally or physically continuous at the first interface and the second and third valence band energy functions are substantially functionally or physically continuous at the second interface.

  12. Energy dependence of color transparency

    SciTech Connect (OSTI)

    Jennings, B.K. (TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia, Canada V6T 2A3 (CA) Institute for Nuclear Theory, HN-12, University of Washington, Seattle, WA (USA)); Miller, G.A. (Department of Physics, FM-15, University of Washington, Seattle, WA (USA) Institute for Nuclear Theory, HN-12, University of Washington, Seattle, WA (USA))

    1991-08-01T23:59:59.000Z

    A quantum-mechanical approach is used to study high-momentum-transfer reactions in which a nucleon is knocked out of a target nucleus. It is found that the nuclear interactions of the wave packet produced in such a hard interaction may cancel, so that the nuclear medium is transparent. Expressions for the effective wave-packet--nucleon interaction and the corresponding distorted waves are presented. An analysis of existing ({ital p},{ital pp}) data at beam momenta from about 5 to 12 GeV/{ital c} suggests that only the nucleon and Roper resonance components of the wave packet contribute to the scattering amplitude. The ({ital p},{ital pp}) data and our theory imply that color-transparency effects in the ({ital e},{ital e}{prime}{ital p}) reaction may be significant at relatively low-momentum transfers of {ital Q}{sup 2}{approx}3--6 GeV{sup 2}.

  13. Approximate Graph Coloring by Semidefinite Programming David Karger \\Lambda Rajeev Motwani y Madhu Sudan z

    E-Print Network [OSTI]

    Sudan z Abstract We consider the problem of coloring k­colorable graphs with the fewest possible colors

  14. Entanglement properties of topological color codes

    E-Print Network [OSTI]

    Mehdi Kargarian

    2008-12-07T23:59:59.000Z

    The entanglement properties of a class of topological stabilizer states, the so called \\emph{topological color codes} defined on a two-dimensional lattice or \\emph{2-colex}, are calculated. The topological entropy is used to measure the entanglement of different bipartitions of the 2-colex. The dependency of the ground state degeneracy on the genus of the surface shows that the color code can support a topological order, and the contribution of the color in its structure makes it interesting to compare with the Kitaev's toric code. While a qubit is maximally entangled with rest of the system, two qubits are no longer entangled showing that the color code is genuinely multipartite entangled. For a convex region, it is found that entanglement entropy depends only on the degrees of freedom living on the boundary of two subsystems. The boundary scaling of entropy is supplemented with a topological subleading term which for a color code defined on a compact surface is twice than the toric code. From the entanglement entropy we construct a set of bipartitions in which the diverging term arising from the boundary term is washed out, and the remaining non-vanishing term will have a topological nature. Besides the color code on the compact surface, we also analyze the entanglement properties of a version of color code with border, i.e \\emph{triangular color code}.

  15. I Color recognition models of daylight illumi-

    E-Print Network [OSTI]

    Draper, Bruce A.

    I Color recognition models of daylight illumi- nation and hybrid reflectance, and predicts of the color of ob- jects with respect to existing models of daylight [12] and surface reflectance [17, 14, 211 a surface reflectance model for hybrid surfaces and a context-based model of daylight illumination

  16. Franz Leberl & Michael Gruber PHOTOGRAMMETRIC COLOR SCANNING

    E-Print Network [OSTI]

    Binford, Michael W.

    Franz Leberl & Michael Gruber 231 PHOTOGRAMMETRIC COLOR SCANNING Franz Leberl 1 , Michael Gruber 2 II, WG II/6 KEY WORDS: Photogrammetric scanning systems, color scanning, masked negative film, calibration, density standards, scanner testing ABSTRACT: Scanning of analog image material remains a key

  17. Stochastic mechanism of color confinement V. Kuvshinov

    E-Print Network [OSTI]

    Heller, Barbara

    Stochastic mechanism of color confinement V. Kuvshinov Joint Institute for Power and Nuclear, for example inside a hadron or deconfined QGP. QCD vacuum is the environment for color quantum particles whose into the pieces transformed under trivial and adjoint representations [4]. As is known due to Casimir scaling

  18. Y AND RELIABILITY: LOGO MANUAL COLOR SCHEME

    E-Print Network [OSTI]

    Bordenstein, Seth

    AND RELIABILITY: LOGO MANUAL COLOR SCHEME TYPOGRAPHY RECOMMENDED DISPLAY SPACE PMS 131C PMS COOL GRAY 11C VERSION HORIZONTAL 1J COLOR SCHEME R=203 G=163 B=57 C=21 M=34 Y=93 K=2 20,0 @Me Nas $10M in equipment Machine shop equipped conference facility All-purpose machine shop Skilled engineering staff

  19. Molecular cytogenetic analysis of human blastocysts andcytotrophoblasts by multi-color FISH and Spectra Imaging analyses

    SciTech Connect (OSTI)

    Weier, Jingly F.; Ferlatte, Christy; Baumgartner, Adolf; Jung,Christine J.; Nguyen, Ha-Nam; Chu, Lisa W.; Pedersen, Roger A.; Fisher,Susan J.; Weier, Heinz-Ulrich G.

    2006-02-08T23:59:59.000Z

    Numerical chromosome aberrations in gametes typically lead to failed fertilization, spontaneous abortion or a chromosomally abnormal fetus. By means of preimplantation genetic diagnosis (PGD), we now can screen human embryos in vitro for aneuploidy before transferring the embryos to the uterus. PGD allows us to select unaffected embryos for transfer and increases the implantation rate in in vitro fertilization programs. Molecular cytogenetic analyses using multi-color fluorescence in situ hybridization (FISH) of blastomeres have become the major tool for preimplantation genetic screening of aneuploidy. However, current FISH technology can test for only a small number of chromosome abnormalities and hitherto failed to increase the pregnancy rates as expected. We are in the process of developing technologies to score all 24 chromosomes in single cells within a 3 day time limit, which we believe is vital to the clinical setting. Also, human placental cytotrophoblasts (CTBs) at the fetal-maternal interface acquire aneuploidies as they differentiate to an invasive phenotype. About 20-50% of invasive CTB cells from uncomplicated pregnancies were found aneuploidy, suggesting that the acquisition of aneuploidy is an important component of normal placentation, perhaps limiting the proliferative and invasive potential of CTBs. Since most invasive CTBs are interphase cells and possess extreme heterogeneity, we applied multi-color FISH and repeated hybridizations to investigate individual CTBs. In summary, this study demonstrates the strength of Spectral Imaging analysis and repeated hybridizations, which provides a basis for full karyotype analysis of single interphase cells.

  20. Reducing Financial Fragility by Ending Too Big to Fail Eighth Annual Finance Conference

    E-Print Network [OSTI]

    Huang, Jianyu

    financial firm must be rescued to prevent risks to overall financial stability is at the heart of the most controversial aspects of the recent financial crisis. Having the government intervene to rescue a private firm of the number of financial firms that failed or were rescued during the crisis that were thought to be "well

  1. Fault Injection Based Assessment of Fail-Silence Provided by Process Duplication versus Internal Error Detection

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    -basedarchitectures for providingfail-silent processes, Voltan and Chameleon ARMORs, are analyzed using fault injection. The goal with an ideal case of full duplication provided by Voltan. Rather than providing fault tolerance through redundant customized hardware, Voltan and Chameleon take the alternate approach of providing fail

  2. Comparing Fail-Silence Provided by Process Duplication versus Internal Error Detection for DHCP Server

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    architectures to protect an application from faults. These two architectures are Voltan, which uses process architectures for providing fail silence: Voltan [2] and Chameleon ARMORs (Adaptive Reconfigurable Mo- bile Objects for Reliability) [13]. Voltan uses replicated processes and a voting algorithm between processes

  3. IRAN UNDER MONGOL DOMINATION The effectiveness and failings of a dual administrative system

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    IRAN UNDER MONGOL DOMINATION The effectiveness and failings of a dual administrative system Denise, as countries with a long sedentary tradition, such as China and Iran, were made subject to a single people of the steppes for over a century.4 THE CONQUEST OF THE IRANIAN LANDS Iran had suffered other major invasions

  4. Factors influencing the neglect of color photography : 1860 to 1970

    E-Print Network [OSTI]

    Milanowski, Stephen R

    1982-01-01T23:59:59.000Z

    While the history of photographic color technology has been adequately discussed by E.J. Hall, Joseph Friedman, and Brian Coe, the relationship between complex tri-color systems and generalized use of color photography has ...

  5. Plastics' Color Problem: How a New Device Will Prevent Waste...

    Broader source: Energy.gov (indexed) [DOE]

    key facts? Commercial plastics made at 752 degrees Fahrenheit and 2,000 psi Conventional plastic color detectors break at high temps and pressures Plastics with incorrect colors,...

  6. acquired color vision: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Websites Summary: 2008 Author manuscript, published in "Dans Workshop on Computer Vision Applications for the VisuallyEnhancing Color Representation for the Color...

  7. Extending the Photon Mapping Method for Realistic Rendering of Hot Gaseous Fluids

    E-Print Network [OSTI]

    Texas at Austin, University of

    sophistication and use of heated gas, fire, and explosion simulations in computer graphics applications gaseous fluids, ranging from simple smoke and gas to fire flames and explosions, abound in the real world, simulated flames and explosion were visualized using color maps, obtained from reference im- ages [1, 2, 3

  8. Colored condensates deep inside neutron stars

    E-Print Network [OSTI]

    David Blaschke

    2014-07-28T23:59:59.000Z

    It is demonstrated how in the absence of solutions for QCD under conditions deep inside compact stars an equation of state can be obtained within a model that is built on the basic symmetries of the QCD Lagrangian, in particular chiral symmetry and color symmetry. While in the vacuum the chiral symmetry is spontaneously broken, it gets restored at high densities. Color symmetry, however, gets broken simultaneously by the formation of colorful diquark condensates. It is shown that a strong diquark condensate in cold dense quark matter is essential for supporting the possibility that such states could exist in the recently observed pulsars with masses of 2 $M_\\odot$.

  9. Induced Magnetism in Color-Superconducting Media

    E-Print Network [OSTI]

    Efrain J. Ferrer

    2010-01-22T23:59:59.000Z

    The dense core of compact stars is the natural medium for the realization of color superconductivity. A common characteristic of such astrophysical objects is their strong magnetic fields, especially those of the so called magnetars. In this talk, I discuss how a color superconducting core can generate or/and enhance the stellar magnetic field independently of a magnetohydrodynamic dynamo mechanism. The magnetic field generator is in this case a gluonic current which circulates to stabilize the color superconductor in the presence of a strong magnetic field or under the pairing stress produced in the medium by the neutrality and $\\beta$-equilibrium constraints.

  10. When Barriers to Markets Fail: Pipeline Deregulation, Spot Markets, and the Topology of the Natural Gas Market

    E-Print Network [OSTI]

    De Vany, Arthur; Walls, W. David

    1992-01-01T23:59:59.000Z

    Experimental Research on Deregulation, natural Gas Pipelineto MarketsFail: Pipeline Deregulation,Spot Markets,and theto Markets Fall: Deregulation, Spot Markets, And the

  11. Color coherence in W + jet events

    SciTech Connect (OSTI)

    Abbott, B.; D0 Collaboration

    1997-11-01T23:59:59.000Z

    We report on preliminary studies of color coherence effects in p{anti p} collisions, based on data collected by the D0 detector during the 1994-1995 run of the Fermilab Tevatron collider, at a center of mass energy {radical}s = 1.8 TeV. Color interference effects are studied by examining particle distribution patterns in W + Jet events. The data are compared to Monte Carlo simulations with different color coherence implementations and to a recent analytic Modified-Leading-Log perturbative calculation based on the Local Parton-Hadron Duality hypothesis. Soft particle radiation is enhanced in the event plane relative to the transverse plane, in agreement with calculations in which the effects of color coherence are fully included.

  12. Color-preserving daytime radiative cooling

    SciTech Connect (OSTI)

    Zhu, Linxiao [Department of Applied Physics, Stanford University, Stanford, California 94305 (United States)] [Department of Applied Physics, Stanford University, Stanford, California 94305 (United States); Raman, Aaswath; Fan, Shanhui, E-mail: shanhui@stanford.edu [Department of Electrical Engineering, Ginzton Laboratory, Stanford University, Stanford, California 94305 (United States)] [Department of Electrical Engineering, Ginzton Laboratory, Stanford University, Stanford, California 94305 (United States)

    2013-11-25T23:59:59.000Z

    We introduce a general approach to radiatively lower the temperature of a structure, while preserving its color under sunlight. The cooling effect persists in the presence of considerable convective and conductive heat exchange and for different solar absorptances.

  13. Statistical Mechanical Models and Topological Color Codes

    E-Print Network [OSTI]

    H. Bombin; M. A. Martin-Delgado

    2007-11-03T23:59:59.000Z

    We find that the overlapping of a topological quantum color code state, representing a quantum memory, with a factorized state of qubits can be written as the partition function of a 3-body classical Ising model on triangular or Union Jack lattices. This mapping allows us to test that different computational capabilities of color codes correspond to qualitatively different universality classes of their associated classical spin models. By generalizing these statistical mechanical models for arbitrary inhomogeneous and complex couplings, it is possible to study a measurement-based quantum computation with a color code state and we find that their classical simulatability remains an open problem. We complement the meaurement-based computation with the construction of a cluster state that yields the topological color code and this also gives the possibility to represent statistical models with external magnetic fields.

  14. Categorization of failed and damaged spent LWR (light-water reactor) fuel currently in storage

    SciTech Connect (OSTI)

    Bailey, W.J.

    1987-11-01T23:59:59.000Z

    The results of a study that was jointly sponsored by the US Department of Energy and the Electric Power Research Institute are described in this report. The purpose of the study was to (1) estimate the number of failed fuel assemblies and damaged fuel assemblies (i.e., ones that have sustained mechanical or chemical damage but with fuel rod cladding that is not breached) in storage, (2) categorize those fuel assemblies, and (3) prepare this report as an authoritative, illustrated source of information on such fuel. Among the more than 45,975 spent light-water reactor fuel assemblies currently in storage in the United States, it appears that there are nearly 5000 failed or damaged fuel assemblies. 78 refs., 23 figs., 19 tabs.

  15. 2-D color code quantum computation

    E-Print Network [OSTI]

    Austin G. Fowler

    2011-01-10T23:59:59.000Z

    We describe in detail how to perform universal fault-tolerant quantum computation on a 2-D color code, making use of only nearest neighbor interactions. Three defects (holes) in the code are used to represent logical qubits. Triple defect logical qubits are deformed into isolated triangular sections of color code to enable transversal implementation of all single logical qubit Clifford group gates. CNOT is implemented between pairs of triple defect logical qubits via braiding.

  16. Antibacterial Colorants: Characterization of Prodiginines and Their Applications on Textile Materials

    E-Print Network [OSTI]

    Hammock, Bruce D.

    with a broad spectrum of colors (4). Besides, some natural colorants, especially anthraquinone type compounds

  17. Rendering graphene supports hydrophilic with non-covalent aromatic functionalization for transmission electron microscopy

    SciTech Connect (OSTI)

    Pantelic, Radosav S., E-mail: pantelic@imbb.forth.gr [National Cancer Institute, 50 South Drive, Building 50, Room 4306, Bethesda, Maryland 20892 (United States); Fu, Wangyang; Schoenenberger, Christian [Department of Physics, University of Basel, Klingelbergstrasse 82, Basel CH-4056 (Switzerland); Stahlberg, Henning [Center for Cellular Imaging and NanoAnalytics, Biozentrum, University of Basel, Mattenstrasse 26, WRO-1058, Basel CH-4058 (Switzerland)

    2014-03-31T23:59:59.000Z

    Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated samples for transmission electron microscopy (TEM), either in retaining protein concentration, providing mechanical stability or dissipating sample charge. However, strong background signal from the amorphous carbon support obstructs that of the sample, and the insulating properties of thin amorphous carbon films preclude any efficiency in dispersing charge. Graphene addresses the limitations of amorphous carbon. Graphene is a crystalline material with virtually no phase or amplitude contrast and unparalleled, high electrical carrier mobility. However, the hydrophobic properties of graphene have prevented its routine application in Cryo-TEM. This Letter reports a method for rendering graphene TEM supports hydrophilic—a convenient approach maintaining graphene's structural and electrical properties based on non-covalent, aromatic functionalization.

  18. Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

    SciTech Connect (OSTI)

    Howison, Mark; Bethel, E. Wes; Childs, Hank

    2010-07-12T23:59:59.000Z

    This work studies the performance and scalability characteristics of"hybrid'"parallel programming and execution as applied to raycasting volume rendering -- a staple visualization algorithm -- on a large, multi-core platform. Historically, the Message Passing Interface (MPI) has become the de-facto standard for parallel programming and execution on modern parallel systems. As the computing industry trends towards multi-core processors, with four- and six-core chips common today and 128-core chips coming soon, we wish to better understand how algorithmic and parallel programming choices impact performance and scalability on large, distributed-memory multi-core systems. Our findings indicate that the hybrid-parallel implementation, at levels of concurrency ranging from 1,728 to 216,000, performs better, uses a smaller absolute memory footprint, and consumes less communication bandwidth than the traditional, MPI-only implementation.

  19. MPI-hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

    SciTech Connect (OSTI)

    Howison, Mark; Bethel, E. Wes; Childs, Hank

    2010-03-20T23:59:59.000Z

    This work studies the performance and scalability characteristics of"hybrid'" parallel programming and execution as applied to raycasting volume rendering -- a staple visualization algorithm -- on a large, multi-core platform. Historically, the Message Passing Interface (MPI) has become the de-facto standard for parallel programming and execution on modern parallel systems. As the computing industry trends towards multi-core processors, with four- and six-core chips common today and 128-core chips coming soon, we wish to better understand how algorithmic and parallel programming choices impact performance and scalability on large, distributed-memory multi-core systems. Our findings indicate that the hybrid-parallel implementation, at levels of concurrency ranging from 1,728 to 216,000, performs better, uses a smaller absolute memory footprint, and consumes less communication bandwidth than the traditional, MPI-only implementation.

  20. Hybrid Parallelism for Volume Rendering on Large, Multi- and Many-core Systems

    SciTech Connect (OSTI)

    Howison, Mark; Bethel, E. Wes; Childs, Hank

    2011-01-01T23:59:59.000Z

    With the computing industry trending towards multi- and many-core processors, we study how a standard visualization algorithm, ray-casting volume rendering, can benefit from a hybrid parallelism approach. Hybrid parallelism provides the best of both worlds: using distributed-memory parallelism across a large numbers of nodes increases available FLOPs and memory, while exploiting shared-memory parallelism among the cores within each node ensures that each node performs its portion of the larger calculation as efficiently as possible. We demonstrate results from weak and strong scaling studies, at levels of concurrency ranging up to 216,000, and with datasets as large as 12.2 trillion cells. The greatest benefit from hybrid parallelism lies in the communication portion of the algorithm, the dominant cost at higher levels of concurrency. We show that reducing the number of participants with a hybrid approach significantly improves performance.

  1. Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

    SciTech Connect (OSTI)

    Howison, Mark; Bethel, E. Wes; Childs, Hank

    2010-06-14T23:59:59.000Z

    This work studies the performance and scalability characteristics of"hybrid" parallel programming and execution as applied to raycasting volume rendering -- a staple visualization algorithm -- on a large, multi-core platform. Historically, the Message Passing Interface (MPI) has become the de-facto standard for parallel programming and execution on modern parallel systems. As the computing industry trends towards multi-core processors, with four- and six-core chips common today and 128-core chips coming soon, we wish to better understand how algorithmic and parallel programming choices impact performance and scalability on large, distributed-memory multi-core systems. Our findings indicate that the hybrid-parallel implementation, at levels of concurrency ranging from 1,728 to 216,000, performs better, uses a smaller absolute memory footprint, and consumes less communication bandwidth than the traditional, MPI-only implementation.

  2. Wavelet Based Color Image Compression and MathematicalWavelet Based Color Image Compression and MathematicalWavelet Based Color Image Compression and MathematicalWavelet Based Color Image Compression and Mathematical Analysis of Sign Entropy CodingAnalysi

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Wavelet Based Color Image Compression and MathematicalWavelet Based Color Image Compression and MathematicalWavelet Based Color Image Compression and MathematicalWavelet Based Color Image Compression.olivier@univ-poitiers.fr Abstract One of the advantages of the Discrete Wavelet Transform (DWT) compared to Fourier Transform (e

  3. Randomly Coloring Graphs of Girth at Least Five [Extended Abstract

    E-Print Network [OSTI]

    Hayes, Thomas

    , a vertex is selected behaved with high probability. This tail inequalityamaytberandom, and its color

  4. CoastWatch/OceanWatch Proving Ground: VIIRS Ocean Color

    E-Print Network [OSTI]

    ;VIIRS Operational Ocean Color User: NWS/EMC · Phytoplankton alter the penetration of solar radiationCoastWatch/OceanWatch Proving Ground: VIIRS Ocean Color User Engagement, Quality Assessment Science Seminar #12;Outline Overview of VIIRS Ocean Color Proving Ground (Hughes) VIIRS Ocean Color

  5. ATTACK BY COLORIZATION OF A GREY-LEVEL IMAGE HIDING ITS COLOR PALETTE Chaumont M. and Puech W.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ATTACK BY COLORIZATION OF A GREY-LEVEL IMAGE HIDING ITS COLOR PALETTE Chaumont M. and Puech W, FRANCE ABSTRACT In this paper, we present a novel attack named colorization attack. This attack of such an attack and thus to take it into account for the future color-hiding watermarking schemes. Index Terms

  6. TO APPEAR IN NEUROPSYCHOLOGIA Chromaticity of color perception and object color knowledge

    E-Print Network [OSTI]

    Thompson-Schill, Sharon

    and perceptual representations. One source of evidence for such overlap comes from neuroimaging reports of co-activation that respond more to colored than grayscale stimuli) are activated by retrieval of object color. One unanswered similarly modulated by the chromaticity of remembered objects (e.g., lemons more than coal)? Subjects

  7. Immersive Volume Rendering of Blood Vessels Gregory Long, Han Suk Kim, Alison Marsden, Yuri Bazilevs, Jurgen P. Schulze

    E-Print Network [OSTI]

    Schulze, Jürgen P.

    Immersive Volume Rendering of Blood Vessels Gregory Long, Han Suk Kim, Alison Marsden, Yuri ABSTRACT In this paper, we present a novel method of visualizing flow in blood vessels. Our approach reads to the sparse structure of blood vessels, we utilize an octree to efficiently store the resampled data

  8. Fail-Safe Design for Large Capacity Li-Ion Battery Systems - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget » FY 2014FacilitiesSheet 300OfficeFail

  9. Reading color barcodes using visual snakes.

    SciTech Connect (OSTI)

    Schaub, Hanspeter (ORION International Technologies, Albuquerque, NM)

    2004-05-01T23:59:59.000Z

    Statistical pressure snakes are used to track a mono-color target in an unstructured environment using a video camera. The report discusses an algorithm to extract a bar code signal that is embedded within the target. The target is assumed to be rectangular in shape, with the bar code printed in a slightly different saturation and value in HSV color space. Thus, the visual snake, which primarily weighs hue tracking errors, will not be deterred by the presence of the color bar codes in the target. The bar code is generate with the standard 3 of 9 method. Using this method, the numeric bar codes reveal if the target is right-side-up or up-side-down.

  10. FAILED GAMMA-RAY BURSTS: THERMAL ULTRAVIOLET/SOFT X-RAY EMISSION ACCOMPANIED BY PECULIAR AFTERGLOWS

    SciTech Connect (OSTI)

    Xu, M.; Huang, Y. F. [Department of Astronomy, Nanjing University, Nanjing 210093 (China); Nagataki, S.; Lee, S.-H., E-mail: hyf@nju.edu.cn [Yukawa Institute for Theoretical Physics, Oiwake-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8502 (Japan)

    2012-02-10T23:59:59.000Z

    We show that the photospheres of 'failed' gamma-ray bursts (GRBs), whose bulk Lorentz factors are much lower than 100, can be outside of internal shocks. The resulting radiation from the photospheres is thermal and bright in the UV/soft X-ray band. The photospheric emission lasts for about 1000 s with a luminosity about several times 10{sup 46} erg s{sup -1}. These events can be observed by current and future satellites. It is also shown that the afterglows of failed GRBs are peculiar at the early stage, which makes it possible to distinguish failed GRBs from ordinary GRBs and beaming-induced orphan afterglows.

  11. Mathematical Proofs of Two Conjectures: The Four Color Problem and The Uniquely 4-colorable Planar Graph

    E-Print Network [OSTI]

    Jin Xu

    2012-01-18T23:59:59.000Z

    The famous four color theorem states that for all planar graphs, every vertex can be assigned one of 4 colors such that no two adjacent vertices receive the same color. Since Francis Guthrie first conjectured it in 1852, it is until 1976 with electronic computer that Appel and Haken first gave a proof by finding and verifying 1936 reducible unavoidable sets, and a simplified proof of Robertson, Sanders, Seymour and Thomas in 1997 only involved 633 reducible unavoidable sets, both proofs could not be realized effectively by hand. Until now, finding the reducible unavoidable sets remains the only successful method to use, which came from Kempe's first "proof" of the four color problem in 1879. An alternative method only involving 4 reducible unavoidable sets for proving the four color theorem is used in this paper, which takes form of mathematical proof rather than a computer-assisted proof and proves both the four color conjecture and the uniquely 4-colorable planar graph conjecture by mathematical method.

  12. A Unified Approach for Physically-Based Simulations and Haptic Rendering

    E-Print Network [OSTI]

    Rene Weller; Gabriel Zachmann

    Figure 1: Our new data structure, the Inner Sphere Tree, is based on sphere packings in arbitrary polygonal objects (left). They are suitable for different kinds of geometric queries, namely proximity queries (middle) and the penetration volume (right). Based on our new geometric data structure, the inner sphere trees, we present fast and stable algorithms for different kinds of collision detection queries between rigid objects at haptic rates. Namely, proximity queries and the penetration volume, which is related to the water displacement of the overlapping region and thus corresponds to a physically motivated force. The latter allows us to define a novel penalty-based collision response scheme that provides continuous forces and torques which are applicable to physically-based simulations as well as to haptic rendering scenarios. Moreover, we present a time-critical version of the penetration volume computation that is able to achieve very tight bounds within a fixed budget of query time. The main idea of our new data structure is to bound the object from the inside with a set of non-overlapping bounding volumes. The results show performance at haptic rates both for proximity and penetration volume queries, independent from the polygon count of the objects.

  13. Color Imaging Arithmetic: Physics Math > Physics + Math

    E-Print Network [OSTI]

    Sharma, Gaurav

    Color Imaging Arithmetic: Physics Math > Physics + Math Gaurav Sharma University of Rochester inter- action commonly form the physical interface by which we connect to the digital cyber-world. Because these devices bridge the physical and the electronic worlds, elegant and effective solutions

  14. Cooling of Color Superconducting Compact Stars

    E-Print Network [OSTI]

    David Blaschke

    2006-03-26T23:59:59.000Z

    We review the status of research on the cooling of compact stars, with emphasis on the influence of color superconducting quark matter phases. Although a consistent microscopic approach is not yet available, severe constraints on the phase structure of matter at high densities come from recent mass and cooling observations of compact stars.

  15. Digital Color in Cellulose Nanocrystal Films

    E-Print Network [OSTI]

    Dumanli, Ahu Gu?mrah; van der Kooij, Hanne M.; Kamita, Gen; Reisner, Erwin; Baumberg, Jeremy J.; Steiner, Ullrich; Vignolini, Silvia

    2014-07-09T23:59:59.000Z

    - photonics 2012, 6, 063516. (18) Vignolini, S.; Rudall, P. J.; Rowland, A. V.; Reed, A.; Moyroud, E.; Faden, R. B.; Baumberg, J. J.; Glover, B. J.; Steiner, U. Pointillist Structural Color in Pollia fruit. Proc. Natl. Acad. Sci. U.S.A. 2012, 109, 15712...

  16. Color selective photodetector and methods of making

    DOE Patents [OSTI]

    Walker, Brian J.; Dorn, August; Bulovic, Vladimir; Bawendi, Moungi G.

    2013-03-19T23:59:59.000Z

    A photoelectric device, such as a photodetector, can include a semiconductor nanowire electrostatically associated with a J-aggregate. The J-aggregate can facilitate absorption of a desired wavelength of light, and the semiconductor nanowire can facilitate charge transport. The color of light detected by the device can be chosen by selecting a J-aggregate with a corresponding peak absorption wavelength.

  17. A COLUMN GENERATION APPROACH FOR GRAPH COLORING

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    set in the graph). We use a column generation method for implicit optimization of the linear program based on an integer programming formulation of the graph coloring problem. This formulation, called is an assignment of labels to each vertex such that the endpoints of any edge have different labels. A minimum

  18. Oceanography June 200450 Colored Dissolved Organic

    E-Print Network [OSTI]

    Oregon, University of

    . Sunlight striking the ocean surface penetrates into the water column and interacts with the dissolvedOceanography June 200450 Colored Dissolved Organic in the Coastal Ocean A N O P T I C A L TO O L F usage that all three words are individu- ally synonymous for "ocean." Poems, song titles, and movies

  19. The rules of perception : American color science, 1831-1931

    E-Print Network [OSTI]

    Rossi, Michael Paul, Ph. D. Massachusetts Institute of Technology

    2011-01-01T23:59:59.000Z

    Although vision was seldom studied in Antebellum America, color and color perception became a critical field of scientific inquiry in the United States during the Gilded Age and progressive era. Through a historical ...

  20. Effects of Storage Container Color and Shading on Water Temperature

    E-Print Network [OSTI]

    Clayton, James Brent

    2012-07-16T23:59:59.000Z

    RWH systems has become a concern. Water temperature is a parameter of water quality and storage container color and shading affect this temperature. Four different colors and three different shadings were applied to twelve rainwater storage barrels...

  1. For the Birds: The Magic of Color in Feathers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that are understood to provide the pigmentation that confers color to animal skin, hair, and feathers. So, how is nature able to achieve such a wide variety of colors with so...

  2. Corrosion of Nuclear Fuel Inside a Failed Copper Nuclear Waste Container

    SciTech Connect (OSTI)

    Broczkowski, Michael E.; Goldik, Jonathan S.; Santos, Billy G.; Noel, James J. [University of Western Ontario, London, ON, N6A 5B7 (Canada); Shoesmith, David [Chemistry, University of Western Ontario, Chemistry Building, London, ON, N6A 5B7 (Canada)

    2007-07-01T23:59:59.000Z

    Canada's Nuclear Waste Management Organization has recommended to the Canadian federal government an adaptive phased management approach to the long-term management of used nuclear fuel. This approach includes isolation in a deep geologic repository. In such a repository, the fuel would be sealed inside a carbon steel-lined copper container. To assist the development of performance assessment models studies of fuel behaviour inside a failed waste container are underway. Using an iterative modeling and experimental approach, the important features and processes that determine fuel behaviour have been identified and studied. These features and processes are discussed and the results of studies to elucidate specific mechanisms and determine important parameter values summarized. (authors)

  3. Scalable and fail-safe deployment of the ATLAS Distributed Data Management system Rucio

    E-Print Network [OSTI]

    Lassnig, Mario; The ATLAS collaboration; Barisits, Martin-Stefan; Beermann, Thomas Alfons; Serfon, Cedric; Garonne, Vincent

    2015-01-01T23:59:59.000Z

    This contribution details the deployment of Rucio, the ATLAS Distributed Data Management system. The main complication is that Rucio interacts with a wide variety of external services, and connects globally distributed data centres under different technological and administrative control, at an unprecedented data volume. It is therefore not possibly to create a duplicate instance of Rucio for testing or integration. Every software upgrade or configuration change is thus potentially disruptive and requires fail-safe software and automatic error recovery. Rucio uses a three-layer scaling and mitigation strategy based on quasi-realtime monitoring. This strategy mainly employs independent stateless services, automatic failover, and service migration. The technologies used for deployment and mitigation include OpenStack, Puppet, Graphite, HAProxy, Apache, and nginx. In this contribution, the reasons and design decisions for the deployment, the actual implementation, and an evaluation of all involved services and c...

  4. Scalable and fail-safe deployment of the ATLAS Distributed Data Management system Rucio

    E-Print Network [OSTI]

    Lassnig, Mario; The ATLAS collaboration; Beermann, Thomas Alfons; Barisits, Martin-Stefan; Garonne, Vincent; Serfon, Cedric

    2015-01-01T23:59:59.000Z

    This contribution details the deployment of Rucio, the ATLAS Distributed Data Management system. The main complication is that Rucio interacts with a wide variety of external services, and connects globally distributed data centres under different technological and administrative control, at an unprecedented data volume. It is therefore not possibly to create a duplicate instance of Rucio for testing or integration. Every software upgrade or configuration change is thus potentially disruptive and requires fail-safe software and automatic error recovery. Rucio uses a three-layer scaling and mitigation strategy based on quasi-realtime monitoring. This strategy mainly employs independent stateless services, automatic failover, and service migration. The technologies used for deployment and mitigation include OpenStack, Puppet, Graphite, HAProxy and Apache. In this contribution, the interplay between these component, their deployment, software mitigation, and the monitoring strategy are discussed.

  5. Neutral Color Superconductivity and Pseudo-Goldstone Modes

    E-Print Network [OSTI]

    Lianyi He; Meng Jin; Pengfei Zhuang

    2005-05-09T23:59:59.000Z

    Four of the five expected Goldstone modes, which will be eaten up by gauge fields, in neutral two-flavor color superconductor are actually pseudo-Goldstone modes, and their degenerated mass is exactly the magnitude of the color chemical potential, which is introduced to guarantee the color neutrality at moderate baryon density.

  6. Green is Our Favorite Color: Students Fill in the Lines with...

    Office of Environmental Management (EM)

    is Our Favorite Color: Students Fill in the Lines with Energy-themed Coloring Book Green is Our Favorite Color: Students Fill in the Lines with Energy-themed Coloring Book...

  7. The Symmetry, Color, and Morphology of Galaxies

    E-Print Network [OSTI]

    Christopher J. Conselice

    1997-10-22T23:59:59.000Z

    The structural symmetry of forty-three face-on galaxy images in the R(65 0 nm) and J(450 nm) bands are measured to determine the usefulness of symmetry a s a morphological parameter. Each galaxy image is rotated by $180$\\deg and subtr acted from the original to obtain a quantitative value for its structural symmet ry. The symmetry numbers computed for the sample are then compared with RC3 mor phological types, color \\& absolute blue magnitudes. A strong correlation betw een color and symmetry is found, and the RC3 Hubble sequence is found to be one of increasing asymmetry. The use of symmetry as a morphological parameter, and the possible causes of the asymmetries are discussed.

  8. Landau gauge condensates from global color model

    E-Print Network [OSTI]

    Zhao Zhang; Wei-qin Zhao

    2006-03-23T23:59:59.000Z

    We compute the dimension-2 gluon pair condensate $g^2$ and the dimension-4 mixed quark-gluon condensate $$ in Landau gauge within the framework of global color model. The result for the dynamical gluon mass is within the range given by other independent determinations. The obtained mixed Landau gauge condensate $$ is clearly dependent on the definitions of the condensates. We show that the consistent result may be obtained when the same definitions are used.

  9. Create The Look You Like-With Color.

    E-Print Network [OSTI]

    Rhoades, Beverly

    1984-01-01T23:59:59.000Z

    and 8-1326 Create The Look You Like- With Texture. DIMENSIONS OF COLOR To become more familiar with the dimensions of color, let's consider a few principles. Hue refers to the name of a color. Primary hues are red, yellow and blue. These cannot... and are arranged between the primary colors on the color Wheel : purple or violet-a combination of red and blue green - a combination of blue and yellow orange-a combination of red and yellow , Extension consumer information specailist, The Texas A&M University...

  10. Abrikosov Gluon Vortices in Color Superconductors

    E-Print Network [OSTI]

    Efrain J. Ferrer

    2010-04-05T23:59:59.000Z

    In this talk I will discuss how the in-medium magnetic field can influence the gluon dynamics in a three-flavor color superconductor. It will be shown how at field strengths comparable to the charged gluon Meissner mass a new phase can be realized, giving rise to Abrikosov's vortices of charged gluons. In that phase, the inhomogeneous gluon condensate anti-screens the magnetic field due to the anomalous magnetic moment of these spin-1 particles. This paramagnetic effect can be of interest for astrophysics, since due to the gluon vortex antiscreening mechanism, compact stars with color superconducting cores could have larger magnetic fields than neutron stars made up entirely of nuclear matter. I will also discuss a second gluon condensation phenomenon connected to the Meissner instability attained at moderate densities by two-flavor color superconductors. In this situation, an inhomogeneous condensate of charged gluons emerges to remove the chromomagnetic instability created by the pairing mismatch, and as a consequence, the charged gluonic currents induce a magnetic field. Finally, I will point out a possible relation between glitches in neutron stars and the existence of the gluon vortices.

  11. Color superconducting quark matter in compact stars

    E-Print Network [OSTI]

    D. B. Blaschke; T. Klahn; F. Sandin

    2007-12-02T23:59:59.000Z

    Recent indications for high neutron star masses (M \\sim 2 M_sun) and large radii (R > 12 km) could rule out soft equations of state and have provoked a debate whether the occurence of quark matter in compact stars can be excluded as well. We show that modern quantum field theoretical approaches to quark matter including color superconductivity and a vector meanfield allow a microscopic description of hybrid stars which fulfill the new, strong constraints. For these objects color superconductivity turns out to be an essential ingredient for a successful description of the cooling phenomenology in accordance with recently developed tests. We discuss the energy release in the neutrino untrapping transition as a new aspect of the problem that hybrid stars masquerade themselves as neutron stars. Quark matter searches in future generations of low-temperature/high-density nucleus-nucleus collision experiments such as low-energy RHIC and CBM @ FAIR might face the same problem of an almost crossover behavior of the deconfinement transition. Therefore, diagnostic tools shall be derived from effects of color superconductivity.

  12. Dynamically reassigning a connected node to a block of compute nodes for re-launching a failed job

    DOE Patents [OSTI]

    Budnik, Thomas A. (Rochester, MN); Knudson, Brant L. (Rochester, MN); Megerian, Mark G. (Rochester, MN); Miller, Samuel J. (Rochester, MN); Stockdell, William M. (Byron, MN)

    2012-03-20T23:59:59.000Z

    Methods, systems, and products for dynamically reassigning a connected node to a block of compute nodes for re-launching a failed job that include: identifying that a job failed to execute on the block of compute nodes because connectivity failed between a compute node assigned as at least one of the connected nodes for the block of compute nodes and its supporting I/O node; and re-launching the job, including selecting an alternative connected node that is actively coupled for data communications with an active I/O node; and assigning the alternative connected node as the connected node for the block of compute nodes running the re-launched job.

  13. UNC Technical Report #TR04-023 http://www.cs.unc.edu/Research/tech-report.html Directly Rendering Non-Polygonal Objects on Graphics Hardware using

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    ], it renders non-planar objects in real time, mixed with standard primitives, without read-back to the CPU. 2. CR Descriptors: I.3.3 (Display algorithms). I.3.5 (Curve, sur- face, solid, and object

  14. Fail-Safe Design for Large Capacity Lithium-Ion Battery Systems

    SciTech Connect (OSTI)

    Kim, G. H.; Smith, K.; Ireland, J.; Pesaran, A.

    2012-07-15T23:59:59.000Z

    A fault leading to a thermal runaway in a lithium-ion battery is believed to grow over time from a latent defect. Significant efforts have been made to detect lithium-ion battery safety faults to proactively facilitate actions minimizing subsequent losses. Scaling up a battery greatly changes the thermal and electrical signals of a system developing a defect and its consequent behaviors during fault evolution. In a large-capacity system such as a battery for an electric vehicle, detecting a fault signal and confining the fault locally in the system are extremely challenging. This paper introduces a fail-safe design methodology for large-capacity lithium-ion battery systems. Analysis using an internal short circuit response model for multi-cell packs is presented that demonstrates the viability of the proposed concept for various design parameters and operating conditions. Locating a faulty cell in a multiple-cell module and determining the status of the fault's evolution can be achieved using signals easily measured from the electric terminals of the module. A methodology is introduced for electrical isolation of a faulty cell from the healthy cells in a system to prevent further electrical energy feed into the fault. Experimental demonstration is presented supporting the model results.

  15. Fission-product-release signatures for LWR fuel rods failed during PCM and RIA transients

    SciTech Connect (OSTI)

    Osetek, D.J.; King, J.J.; Croucher, D.W.

    1981-01-01T23:59:59.000Z

    This paper discusses fission product release from light-water-reactor-type fuel rods to the coolant loop during design basis accident tests. One of the tests was a power-cooling-mismatch test in which a single fuel rod was operated in film boiling beyond failure. Other tests discussed include reactivity initiated accident (RIA) tests, in which the fuel rods failed as a result of power bursts that produced radial-average peak fuel enthalpies ranging from 250 to 350 cal/g. One of the RIA tests used two previously irradiated fuel rods. On-line gamma spectroscopic measurements of short-lived fission products, and important aspects of fission product behavior observed during the tests, are discussed. Time-dependent release fractions for short-lived fission products are compared with release fractions suggested by: the Reactor Safety Study; NRC Regulatory Guides; and measurements from the Three Mile Island accident. Iodine behavior observed during the tests is discussed, and fuel powdering is identified as a source of particulate fission product activity, the latter of which is neglected for most accident analyses.

  16. Anaphylatoxin C5a fails to promote prostacyclin release from cultured human endothelial cells

    SciTech Connect (OSTI)

    Lunberg, C.; Marceau, F.; Huey, R.; Hugli, T.E.

    1986-03-01T23:59:59.000Z

    A predominantly relaxing effect of C5a on isolated blood vessels has been reported, which is associated with prostacyclin release from the vessel wall. Further, the well known hypothensive effect of C5a, also associated with increased prostacyclin output and preventable by indomethacin, indicates an involvement of endothelial cells in this reaction. In this study the authors characterized the response to C5a of cultured human endothelial cells from umbilical vein as measured by prostacyclin release. Prostacyclin was quantitated by radioimmunoassay as 6-keto-PGF/sub 1..cap alpha../. Subcultured cells respond to histamine and mellitin with increased prostacyclin production, but do not respond to leukotriene C4 (LTC/sub 4/). Primary cultures, on the other hand, respond to LTC/sub 4/ and the histamine response is 7-fold greater for these cells than for subcultured cells. However, neither primary nor subcultured cells release prostacyclin following application of either human C5a (100 nM) or C3a (1 ..mu..M). Also, these cells fail to show specific binding sites for /sup 125/I-C5a. In contrast, endothelial cells in the presence of human PMNs challenged with C5a release prostacyclin. These data suggest that C5a has no direct effect on the endothelial cell, but rather activates this cell indirectly via mediators from other cells known to respond to C5a.

  17. Real Compton Scattering via Color Dipoles

    E-Print Network [OSTI]

    B. Z. Kopeliovich; Ivan Schmidt; M. Siddikov

    2009-08-24T23:59:59.000Z

    We study photoabsorption reaction and real Compton scattering (RCS) within the color dipole model. We rely on a photon wave function derived in the instanton vacuum model, and on the energy dependent phenomenological elastic dipole amplitude. Data for the photoabsorption cross section at high energies agree with our parameter free calculations. We also provide predictions for the differential RCS cross section. Although no data for small angle Compton scattering are available so far, this process can be measured in ultra-peripheral hadronic and nuclear collisions at the LHC.

  18. Causal Baryon Diffusion and Colored Noise

    E-Print Network [OSTI]

    J. I. Kapusta; C. Young

    2014-04-18T23:59:59.000Z

    We construct a model of baryon diffusion which has the desired properties of causality and analyticity. The model also has the desired property of colored noise, meaning that the noise correlation function is not a Dirac delta function in space and time; rather, it depends on multiple time and length constants. The model can readily be incorporated in 3+1 dimensional second order viscous hydro-dynamical models of heavy ion collisions, which is particularly important at beam energies where the baryon density is large.

  19. Coloring and Activity Book | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1. FeedstockCLEANSprings Gets anColoring and Activity Book

  20. Fermilab | Graphic Standards at Fermilab | Color palette

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.New Mexico Feb. 13, 2013Focus Group Report RobertColor palette PDF

  1. Additional Studies of the Criticality Safety of Failed Used Nuclear Fuel

    SciTech Connect (OSTI)

    Marshall, William BJ J [ORNL] [ORNL; Wagner, John C [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    Commercial used nuclear fuel (UNF) in the United States is expected to remain in storage for periods potentially greater than 40 years. Extended storage (ES) time and irradiation to high-burnup values (>45 GWd/t) may increase the potential for fuel failure during normal and accident conditions involving storage and transportation. Fuel failure, depending on the severity, could result in changes to the geometric configuration of the fuel, which has safety and regulatory implications. The likelihood and extent of fuel reconfiguration and its impact on the safety of the UNF is not well understood. The objective of this work is to assess and quantify the impact of fuel reconfiguration due to fuel failure on criticality safety of UNF in storage and transportation casks. Criticality analyses are conducted considering representative UNF designs covering a range of enrichments and burnups in multiple cask systems. Prior work developed a set of failed fuel configuration categories and specific configurations were evaluated to understand trends and quantify the consequences of worst-case potential reconfiguration progressions. These results will be summarized here and indicate that the potential impacts on subcriticality can be rather significant for certain configurations (e.g., >20% keff). It can be concluded that the consequences of credible fuel failure configurations from ES or transportation following ES are manageable (e.g., <5% keff). The current work expands on these efforts and examines some modified scenarios and modified approaches to investigate the effectiveness of some techniques for reducing the calculated increase in keff. The areas included here are more realistic modeling of some assembly types and the effect of reconfiguration of some assemblies in the storage and transportation canister.

  2. DESIGN OF A FAILED LANDFILL SLOPE By: Timothy D. Stark, W. Douglas Evans-, and Paul E. Sherry'

    E-Print Network [OSTI]

    DESIGN OF A FAILED LANDFILL SLOPE 1 ~) ~ ~ By: Timothy D. Stark, W. Douglas Evans-, and Paul E solid waste landfill in which lateral displacements of up to 900 ft (275 m) and vertical settlements municipal solid waste landfill occupies 135 acres (546 km 2 ) approximately 9 miles (15.3 km) n

  3. Alternatives for Using Failed Corn in the Texas High Plains Ted McCollum III and Brent Bean

    E-Print Network [OSTI]

    Mukhtar, Saqib

    for Using Failed Corn in the Texas High Plains Ted McCollum III and Brent Bean Extension Beef Cattle The Texas A&M University System SCS-1998-18 Some corn producers are deciding to quit watering a portion of their corn fields in order to reallocate the water. What can be done to salvage some value from the corn

  4. Probing color-singlet exchange at D0

    SciTech Connect (OSTI)

    Abbott, B. [New York Univ., NY (United States); Abolins, M. [Michigan State Univ., East Lansing, MI (United States); Acharya, B.S. [Delhi Univ. (India)] [and others; D0 Collaboration

    1997-07-01T23:59:59.000Z

    We present latest preliminary results on hard color-singlet exchange in proton-antiproton collisions. The fraction of dijet events produced via color-singlet exchange is measured as a function of jet transverse energy, dijet pseudorapidity separation, and proton-antiproton center-of-mass energy. These results are qualitatively consistent with a color-singlet fraction that increases with increasing quark-initiated processes.

  5. Color stable manganese-doped phosphors

    DOE Patents [OSTI]

    Lyons, Robert Joseph (Burnt Hills, NY); Setlur, Anant Achyut (Niskayuna, NY); Deshpande, Anirudha Rajendra (Twinsburg, OH); Grigorov, Ljudmil Slavchev (Sofia, BG)

    2012-08-28T23:59:59.000Z

    A process for preparing color stable Mn.sup.+4 doped phosphors includes providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof. A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor composition radiationally coupled to the light source, and which includes a color stable Mn.sup.+4 doped phosphor.

  6. The strength of crystalline color superconductors

    E-Print Network [OSTI]

    Massimo Mannarelli; Krishna Rajagopal; Rishi Sharma

    2007-10-01T23:59:59.000Z

    We present a study of the shear modulus of the crystalline color superconducting phase of quark matter, showing that this phase of dense, but not asymptotically dense, quark matter responds to shear stress as a very rigid solid. This phase is characterized by a gap parameter $\\Delta$ that is periodically modulated in space and therefore spontaneously breaks translational invariance. We derive the effective action for the phonon fields that describe space- and time-dependent fluctuations of the crystal structure formed by $\\Delta$, and obtain the shear modulus from the coefficients of the spatial derivative terms. Within a Ginzburg-Landau approximation, we find shear moduli which are 20 to 1000 times larger than those of neutron star crusts. This phase of matter is thus more rigid than any known material in the universe, but at the same time the crystalline color superconducting phase is also superfluid. These properties raise the possibility that the presence of this phase within neutron stars may have distinct implications for their phenomenology. For example, (some) pulsar glitches may originate in crystalline superconducting neutron star cores.

  7. Electron beam irradiation of gemstone for color enhancement

    SciTech Connect (OSTI)

    Idris, Sarada; Ghazali, Zulkafli; Hashim, Siti A'iasah; Ahmad, Shamshad; Jusoh, Mohd Suhaimi [Malaysian Nuclear Agency, Bangi, Selangor (Malaysia); School of Chemicals and Material Engineering, NUST Islamabad (Pakistan); Malaysian Nuclear Agency, Bangi, Selangor (Malaysia)

    2012-09-26T23:59:59.000Z

    Numerous treatment of gemstones has been going on for hundreds of years for enhancing color and clarity of gems devoid of these attributes. Whereas previous practices included fraudulent or otherwise processes to achieve the color enhancement, the ionizing radiation has proven to be a reliable and reproducible technique. Three types of irradiation processes include exposure to gamma radiation, electron beam irradiation and the nuclear power plants. Electron Beam Irradiation of Gemstone is a technique in which a gemstone is exposed to highly ionizing radiation electron beam to knock off electrons to generate color centers culminating in introduction of deeper colors. The color centers may be stable or unstable. Below 9MeV, normally no radioactivity is introduced in the exposed gems. A study was conducted at Electron Beam Irradiation Centre (Alurtron) for gemstone color enhancement by using different kind of precious gemstones obtained from Pakistan. The study shows that EB irradiation not only enhances the color but can also improves the clarity of some type of gemstones. The treated stones included kunzite, tourmaline, topaz, quartz, aquamarine and cultured pearls. Doses ranging from 25 kGy to 200 KGy were employed to assess the influence of doses on color and clarity and to select the optimum doses. The samples used included both the natural and the faceted gemstones. It is concluded that significant revenue generation is associated with the enhancement of the color in clarity of gemstones which are available at very cheap price in the world market.

  8. Goldstone bosons in the color-flavor locked phase

    E-Print Network [OSTI]

    Verena Werth; Michael Buballa; Micaela Oertel

    2006-11-30T23:59:59.000Z

    We study pseudoscalar meson excitations in the color-flavor locked phase within a Nambu-Jona-Lasinio-type model by calculating diquark loops.

  9. Goldstone bosons in the color-flavor locked phase

    E-Print Network [OSTI]

    Werth, V; örtel, M; Werth, Verena; Buballa, Michael; Oertel, Micaela

    2006-01-01T23:59:59.000Z

    We study pseudoscalar meson excitations in the color-flavor locked phase within a Nambu-Jona-Lasinio-type model by calculating diquark loops.

  10. Color Glass Condensate in QCD at High Energy

    E-Print Network [OSTI]

    Kazunori Itakura

    2004-10-28T23:59:59.000Z

    I give a brief review about the color glass condensate, which is the universal form of hadrons and nuclei at high energies.

  11. aerial color infrared: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: Solar infrared colors provide powerful constraints on the stellar effective temperature scale, but to this purpose they must be measured with both accuracy and precision....

  12. Acceptance test report for the mobile color camera system

    SciTech Connect (OSTI)

    Castleberry, J.L., Fluor Daniel Hanford

    1997-02-27T23:59:59.000Z

    The purpose of this report is to present test data recorded during acceptance testing of the Mobile Color Camera System (MCCS).

  13. The Color-Flavor Transformation and Lattice QCD

    E-Print Network [OSTI]

    B. Schlittgen; T. Wettig

    2002-09-09T23:59:59.000Z

    We present the color-flavor transformation for gauge group SU(N_c) and discuss its application to lattice QCD.

  14. Optofluidic-Tunable Color Filters And Spectroscopy Based On Liquid...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Based On Liquid-Crystal Microflows. Abstract: The integration of color filters with microfluidics has attracted substantial attention in recent years, for on-chip absorption,...

  15. LED lamp color control system and method

    DOE Patents [OSTI]

    Gaines, James; Clauberg, Bernd; Van Erp, Josephus A.M.

    2013-02-05T23:59:59.000Z

    An LED lamp color control system and method including an LED lamp having an LED controller 58; and a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 determines whether the LED source 80 is in a feedback controllable range, stores measured optical flux for the LED source 80 when the LED source 80 is in the feedback controllable range, and bypasses storing the measured optical flux when the LED source 80 is not in the feedback controllable range.

  16. Rates for Color Shifted Microlensing Events

    E-Print Network [OSTI]

    Ari Buchalter; Marc Kamionkowski; R. Michael Rich

    1995-11-08T23:59:59.000Z

    If the objects responsible for gravitational microlensing (ML) of Galactic-bulge stars are faint dwarfs, then blended light from the lens will distort the shape of the ML light curve and shift the color of the observed star during the event. The resolution in current surveys is not accurate enough to observe this effect, but it should be detected with frequent and precise followup observations. We calculate the expected rates for ML events where the shape distortions will be observable by such followup observations, assuming that the lenses are ordinary main-sequence stars in a bar and in the disk. We study the dependence of the rates for color-shifted (CS) events on the frequency of followup observations and on the precision of the photometry for a variety of waveband pairings. We find that for hourly observations in $B$ and $K$ with typical photometric errors of 0.01 mag, 28\\% of the events where a main-sequence bulge star is lensed, and 7\\% of the events where the source is a bulge giant, will give rise to a measurable CS at the 95\\% confidence level. For observations in $V$ and $I$, the fractions become 18\\% and 5\\%, respectively, but may be increased to 40\\% and 13\\% by improved photometric accuracy and increased sampling frequency. We outline how the mass, distance, and transverse speed of the lens can be obtained, giving examples of typical errors. We discuss how CS events can be distinguished from events where the source is blended with a binary companion.

  17. Factors affecting the color of corn tortillas and tortilla chips

    E-Print Network [OSTI]

    Mireles, Raquel C

    1995-01-01T23:59:59.000Z

    to increase or decrease pH. Hydrogen, benzoyl and calcium peroxide were added as bleaching agents to improve tortilla chip color. Masa was sheeted, baked, cut, equilibrated and fried to produce tortillas and chips using pilot plant equipment. The color (L, a...

  18. The CIEDE2000 Color-Difference Formula: Implementation Notes,

    E-Print Network [OSTI]

    Sharma, Gaurav

    The CIEDE2000 Color-Difference Formula: Implementation Notes, Supplementary Test Data and scientists in correctly implementing the recently developed CIEDE2000 color-difference formula. We indicate mathematical discontinuities in the formula. © 2004 Wiley Periodicals, Inc. Col Res Appl, 30, 21­30, 2005

  19. Atmospheric ozone and colors of the Antarctic twilight sky

    E-Print Network [OSTI]

    Lee Jr., Raymond L.

    Atmospheric ozone and colors of the Antarctic twilight sky Raymond L. Lee, Jr.,1, * Wolfgang Meyer absorption at longer wavelengths by ozone's Chappuis bands. Because stratospheric ozone is greatly depleted correlations between ozone concentration and twilight colors. We also used a spectroradiometer at a midlatitude

  20. Enhancement of Color Images By Efficient Demosaicing Liron D. Grossmann

    E-Print Network [OSTI]

    Eldar, Yonina

    Enhancement of Color Images By Efficient Demosaicing Liron D. Grossmann and Yonina C. Eldar November 4, 2004 Abstract We propose an efficient method for reconstructing a full-color image from its partially sam- pled version. The suggested algorithm is non-iterative and is based on the properties

  1. EXTENDED SIMPLE COLORED PETRI NETS: A TOOL FOR PLANT SIMULATION

    E-Print Network [OSTI]

    Coglio, Alessandro

    EXTENDED SIMPLE COLORED PETRI NETS: A TOOL FOR PLANT SIMULATION Antonio Camurri and Alessandro, I­16145 Genova, Italy {music, tokamak}@dist.unige.it ABSTRACT Extended Simple Colored Petri Nets (ESCP­nets) are a new class of High­level Petri Nets conceived as a good trade­off between Petri Nets (P­nets

  2. Supplemental feeding of lactating does increased body condition and circulating leptin but fails to improve reproductive efficiency 

    E-Print Network [OSTI]

    Candler, Kimberly Carol

    2013-02-22T23:59:59.000Z

    SUPPLEMENTAL FEEDING OF LACTATING DOES INCREASED BODY CONDITION ANIl CIRCULATING LEPTIN BUT FAILS TO IMPROVE REPRODUCTIVE EFFICIENCY A Senior Honors Thesis by KIMBERLY CAROL CANDLER Submitted to the OIIIce of Honors Programs 4 Academic... Scholarships Texas AdtM University in partial fulSlment of the requirements of the UNIVERSITY UNDERGRADUATE RESEARCH FELLOWS April 2001 Group: Biomedical Sciences SUPPLEMENTAL FEEDING OF LACTAT&lG DOES INCREASED BODY CONDITION AND CIRCULATING LEPTIN...

  3. Use of a Hydrogel-Coated Self-Expandable Coil to Salvage a Failed Transcatheter Embolization of a Mesenteric Hemorrhage

    SciTech Connect (OSTI)

    Bui, James T.; West, Derek L.; Pai, Rajiv; Owens, Charles A. [University of Illinois Medical Center, Department of Radiology (M/C 931) (United States)], E-mail: cowens@uic.edu

    2006-12-15T23:59:59.000Z

    HydroCoil (MicroVention, Aliso Viejo, CA, USA) is a self-expanding detachable coil developed to improve the endovascular occlusion of intracranial aneurysms. The hydrogel polymer covering the microcoil expands to several times its original diameter to enhance thrombosis of the intended vessel. We made use of this new technology to occlude a mesenteric artery pseudoaneurysm that failed superselective embolization with standard microcoils.

  4. Finite temperature topological order in 2D topological color codes

    E-Print Network [OSTI]

    Mehdi Kargarian

    2009-07-19T23:59:59.000Z

    In this work the topological order at finite temperature in two-dimensional color code is studied. The topological entropy is used to measure the behavior of the topological order. Topological order in color code arises from the colored string-net structures. By imposing the hard constrained limit the exact solution of the entanglement entropy becomes possible. For finite size systems, by raising the temperature, one type of string-net structure is thermalized and the associative topological entropy vanishes. In the thermodynamic limit the underlying topological order is fragile even at very low temperatures. Taking first the thermodynamic limit and then the zero-temperature limit and vice versa does not commute, and their difference is related only to the topology of regions. The contribution of the colors and symmetry of the model in the topological entropy is also discussed. It is shown how the gauge symmetry of the color code underlies the topological entropy.

  5. Bose-Einstein correlations and color reconnection in hadronic W

    E-Print Network [OSTI]

    Raimund Ströhmer

    2006-01-09T23:59:59.000Z

    We report on studies of Bose-Einstein correlations and color reconnection in hadronic W pair production at LEP. Bose-Einstein correlations between identical particles from the decay of different W's are studied by comparing the particle correlation in hadronic W pair decays to those in events which are constructed from the combination of the hadronic parts of two events where one of the Ws decays leptonicaly. The LEP combined result of the strength of the effect is consistent with zero and can be used to limit the systematic uncertainty due to Bose-Einstein correlations on the W mass measurements. Color reconnection is expected to affect the production of particles in hadronic decays of W pairs. Measurements of inclusive charged particle multiplicities, and of their angular distribution with respect to the four jet axes of the events, are used to test models of color reconnection. The results are both consistent with models without color reconnection and models with moderate color reconnection. They can be used to exclude more extreme models of color reconnection and thereby limit the uncertainty due to color reconnection on the W mass measurement.

  6. A satellite ocean color observation operator system for eutrophication assessment in coastal waters

    E-Print Network [OSTI]

    Fontana, Clément

    A satellite ocean color observation operator system for eutrophication assessment in coastal waters: Satellite ocean color Observation operator Eutrophication Remote sensing Radiative transfer modeling

  7. Scattering off the Color Glass Condensate

    E-Print Network [OSTI]

    Mäntysaari, Heikki

    2015-01-01T23:59:59.000Z

    In this thesis the Color Glass Condensate (CGC) framework, which describes quantum chromodynamics (QCD) at high energy, is applied to various scattering processes. Higher order corrections to the CGC evolution equations, known as the BK and JIMWLK equations, are also considered. It is shown that the leading order CGC calculations describe the experimental data from electron-proton deep inelastic scattering (DIS), proton-proton and proton-nucleus collisions. The initial condition for the BK evolution equation is obtained by performing a fit to deep inelastic scattering data. The fit result is used as an input to calculations of single particle spectra and nuclear suppression in proton-proton and proton-nucleus collisions, which are shown to be in agreement with RHIC and LHC measurements. In particular, the importance of a proper description of the nuclear geometry consistently with the DIS data fits is emphasized, as it results in a nuclear suppression factor $R_{pA}$ which is consistent with the available exp...

  8. Single-fiber multi-color pyrometry

    DOE Patents [OSTI]

    Small, IV, Ward; Celliers, Peter

    2004-01-27T23:59:59.000Z

    This invention is a fiber-based multi-color pyrometry set-up for real-time non-contact temperature and emissivity measurement. The system includes a single optical fiber to collect radiation emitted by a target, a reflective rotating chopper to split the collected radiation into two or more paths while modulating the radiation for lock-in amplification (i.e., phase-sensitive detection), at least two detectors possibly of different spectral bandwidths with or without filters to limit the wavelength regions detected and optics to direct and focus the radiation onto the sensitive areas of the detectors. A computer algorithm is used to calculate the true temperature and emissivity of a target based on blackbody calibrations. The system components are enclosed in a light-tight housing, with provision for the fiber to extend outside to collect the radiation. Radiation emitted by the target is transmitted through the fiber to the reflective chopper, which either allows the radiation to pass straight through or reflects the radiation into one or more separate paths. Each path includes a detector with or without filters and corresponding optics to direct and focus the radiation onto the active area of the detector. The signals are recovered using lock-in amplification. Calibration formulas for the signals obtained using a blackbody of known temperature are used to compute the true temperature and emissivity of the target. The temperature range of the pyrometer system is determined by the spectral characteristics of the optical components.

  9. Color stable manganese-doped phosphors

    DOE Patents [OSTI]

    Lyons, Robert Joseph; Setlur, Anant Achyut; Deshpande, Anirundha Rajendra; Grigorov, Ljudmil Slavchev

    2014-04-29T23:59:59.000Z

    A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor material radiationally coupled to the light source. The phosphor material includes a color-stable Mn.sup.+4 doped phosphor prepared by a process including providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof.

  10. Single-fiber multi-color pyrometry

    DOE Patents [OSTI]

    Small, IV, Ward (Livermore, CA); Celliers, Peter (Berkeley, CA)

    2000-01-01T23:59:59.000Z

    This invention is a fiber-based multi-color pyrometry set-up for real-time non-contact temperature and emissivity measurement. The system includes a single optical fiber to collect radiation emitted by a target, a reflective rotating chopper to split the collected radiation into two or more paths while modulating the radiation for lock-in amplification (i.e., phase-sensitive detection), at least two detectors possibly of different spectral bandwidths with or without filters to limit the wavelength regions detected and optics to direct and focus the radiation onto the sensitive areas of the detectors. A computer algorithm is used to calculate the true temperature and emissivity of a target based on blackbody calibrations. The system components are enclosed in a light-tight housing, with provision for the fiber to extend outside to collect the radiation. Radiation emitted by the target is transmitted through the fiber to the reflective chopper, which either allows the radiation to pass straight through or reflects the radiation into one or more separate paths. Each path includes a detector with or without filters and corresponding optics to direct and focus the radiation onto the active area of the detector. The signals are recovered using lock-in amplification. Calibration formulas for the signals obtained using a blackbody of known temperature are used to compute the true temperature and emissivity of the target. The temperature range of the pyrometer system is determined by the spectral characteristics of the optical components.

  11. The Glueball sector of two-flavor Color Superconductivity

    E-Print Network [OSTI]

    R. Ouyed; F. Sannino

    2001-03-15T23:59:59.000Z

    We construct the effective Lagrangian describing the light glueballs associated with the unbroken and confining SU(2) color subgroup for the 2 flavor superconductive phase of QCD. This Lagrangian constitutes a key ingredient for understanding the non perturbative physics of 2 flavor color superconductivity. We estimate the two photon decay process of the light glueballs using the saturation of the electromagnetic trace anomaly at the effective Lagrangian level. The present results are particularly relevant to our model of Gamma Ray Bursts based on color superconductivity in Quark Stars (R. Ouyed and F. Sannino astro-ph/0103022).

  12. Spin-one color superconductors: collective modes and effective Lagrangian

    E-Print Network [OSTI]

    Jin-yi Pang; Tomas Brauner; Qun Wang

    2010-10-11T23:59:59.000Z

    We investigate the collective excitations in spin-one color superconductors. We classify the Nambu--Goldstone modes by the pattern of spontaneous symmetry breaking, and then use the Ginzburg--Landau theory to derive their dispersion relations. These soft modes play an important role for the low-energy dynamics of the system such as the transport phenomena and hence are relevant for late-stage evolution of neutron stars. In the case of the color-spin-locking phase, we use a functional technique to obtain the low-energy effective action for the physical Nambu--Goldstone bosons that survive after gauging the color symmetry.

  13. Our goal is to develop physically based lighting models and percep-tually based rendering procedures for computer graphics that will

    E-Print Network [OSTI]

    Ferwerda, James A.

    be a major paradigm shift for the computer graphics industry, but would have much broader applicability thanAbstract Our goal is to develop physically based lighting models and percep- tually based rendering framework is subdivided into three sub-sections: the local light reflection model, the energy transport

  14. VolPack: A Volume Rendering Library This chapter describes the design of an experimental software library called VolPack. The

    E-Print Network [OSTI]

    Stanford University

    library based on user­defined callback functions for shading and classification. Alterna­ tivelyChapter 8 VolPack: A Volume Rendering Library This chapter describes the design of an experimental software library called VolPack. The library provides a high­performance implementation of the algorithms

  15. Love.Leech.Tomato. A non-photorealistically rendered short film by David Maas, Tatjana Maas [brainpets GbR -Germany] and Thomas Luft [University of Konstanz -Germany

    E-Print Network [OSTI]

    Reiterer, Harald

    ­ as ex- perienced through deformation, transformation and interpretation, the accessiblity of which without any additional editing. ...two different shadow layers, The Renderer The core of aqua on layers forms the core of aquaTree. aquaTree offers both a non-photorealistic mode and a standard shaded

  16. Computer rotoscoping with the aid of color recognition

    E-Print Network [OSTI]

    Allen, Rebecca A

    1980-01-01T23:59:59.000Z

    Rotoscoping is explored as a computer animation technique. The optical videodisc serves as the image storage and input source. Image processing and tablet painting routines are applied to digitized frames. "Color recognition", ...

  17. Text-Alternative Version: LED Color Stability Webinar

    Broader source: Energy.gov [DOE]

    Michael Royer: All right, welcome ladies and gentleman. I'm Michael Royer of Pacific Northwest National Laboratory, and I'd like to welcome you to today's webinar on LED Color Stability, Ten...

  18. How ocean color can steer Pacific tropical cyclones

    E-Print Network [OSTI]

    Gnanadesikan, Anand

    Because ocean color alters the absorption of sunlight, it can produce changes in sea surface temperatures with further impacts on atmospheric circulation. These changes can project onto fields previously recognized to alter ...

  19. System design description 241-SY-101 color video camera

    SciTech Connect (OSTI)

    Kohlman, E.H.; Smet, D.B.

    1994-12-01T23:59:59.000Z

    This System Design Description describes the major components of the 101-SY color camera system. The system is comprised of the camera assembly, the purge system, and the multiport riser unit.

  20. Quantum computing by color-code lattice surgery

    E-Print Network [OSTI]

    Andrew J. Landahl; Ciaran Ryan-Anderson

    2014-07-18T23:59:59.000Z

    We demonstrate how to use lattice surgery to enact a universal set of fault-tolerant quantum operations with color codes. Along the way, we also improve existing surface-code lattice-surgery methods. Lattice-surgery methods use fewer qubits and the same time or less than associated defect-braiding methods. Furthermore, per code distance, color-code lattice surgery uses approximately half the qubits and the same time or less than surface-code lattice surgery. Color-code lattice surgery can also implement the Hadamard and phase gates in a single transversal step---much faster than surface-code lattice surgery can. Against uncorrelated circuit-level depolarizing noise, color-code lattice surgery uses fewer qubits to achieve the same degree of fault-tolerant error suppression as surface-code lattice surgery when the noise rate is low enough and the error suppression demand is high enough.

  1. Topological color codes and two-body quantum lattice Hamiltonians

    E-Print Network [OSTI]

    Kargarian, M.

    Topological color codes are among the stabilizer codes with remarkable properties from the quantum information perspective. In this paper, we construct a lattice, the so-called ruby lattice, with coordination number 4 ...

  2. Interactive musical visualization based on emotional and color theory

    E-Print Network [OSTI]

    Bowens, Karessa Natee

    2009-05-15T23:59:59.000Z

    Influenced by synesthesia, the creators of such ‘visual musics’ as abstract art, color organs, abstract film, and most recently visualizers, have attempted to illustrate correspondences between the senses. This thesis attempts to develop a framework...

  3. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Lamartine, Bruce Carvell; Orler, E. Bruce; Sutton, Richard Matthew Charles; Song, Shuangqi

    2014-11-11T23:59:59.000Z

    Hair was coated with polymer-containing fluid and then hot pressed to form a composite of hair and a polymer film imprinted with a nanopattern. Polychromatic light incident on the nanopattern is diffracted into dispersed colored light.

  4. JPSS Proving Ground: NOAA User Based Assessment of Ocean Color

    E-Print Network [OSTI]

    and developed primarily from a series of interviews, indicates: 1. Use of IDPS-sourced ocean color EDR for global coverage. 2. Self consistency requirements between SDR and EDR processing including

  5. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Lamartine, Bruce Carvell; Orler, E. Bruce; Sutton, Richard Matthew Charles; Song, Shuangqi

    2013-12-17T23:59:59.000Z

    Hair was coated with polymer-containing fluid and then hot pressed to form a composite of hair and a polymer film imprinted with a nanopattern. Polychromatic light incident on the nanopattern is diffracted into dispersed colored light.

  6. Scattering off the Color Glass Condensate

    E-Print Network [OSTI]

    Heikki Mäntysaari

    2015-06-24T23:59:59.000Z

    In this thesis the Color Glass Condensate (CGC) framework, which describes quantum chromodynamics (QCD) at high energy, is applied to various scattering processes. Higher order corrections to the CGC evolution equations, known as the BK and JIMWLK equations, are also considered. It is shown that the leading order CGC calculations describe the experimental data from electron-proton deep inelastic scattering (DIS), proton-proton and proton-nucleus collisions. The initial condition for the BK evolution equation is obtained by performing a fit to deep inelastic scattering data. The fit result is used as an input to calculations of single particle spectra and nuclear suppression in proton-proton and proton-nucleus collisions, which are shown to be in agreement with RHIC and LHC measurements. In particular, the importance of a proper description of the nuclear geometry consistently with the DIS data fits is emphasized, as it results in a nuclear suppression factor $R_{pA}$ which is consistent with the available experimental data. In addition to single particle production, the correlations between two hadrons at forward rapidity are computed. The RHIC measurements are shown to be naturally explainable in the CGC framework, and the previous CGC calculations are improved by including the so called inelastic and double parton scattering contributions. This improvement is shown to be required in order to get results compatible with the experimentally measured correlations. Exclusive vector meson production, which can be a powerful tool to study the gluonic structure of nuclei at small Bjorken-$x$, is also considered. The cross sections are calculated within the CGC framework in the context of a future electron-ion collider. In particular, the cross section for incoherent diffractive vector meson production is derived and a centrality estimator for this process is proposed.

  7. Color breaking in the quantum leaped stop decay

    E-Print Network [OSTI]

    Imre Czovek

    2015-04-12T23:59:59.000Z

    The superfield propagator contains a measurable quantum leap, which comes from the definition of SUSY. In the sfermion -> Goldstino + fermion vertex change: 1. the spin of sparticle with discrete 1/2, 2. the Grassman superspace with the Goldstino shift operator. 3. the spacetime as the result of extra dimensional leap. The leap nature of SUSY transformations appears in the squark decay, it is the analog definition of SUSY. The quantum leaped outgoing propagators are determined and break locally the energy and the charge. Like to the teleportation the entangled pairs are here the b quark and the Goldstino. The dominant stop production is from gluons. The stop-antistop pair decay to quantum leaped b (c or t) quark, and the decay break the color. I get for the (color breaking) quantum leap: 10^-18 m !!! And 10^-11 m color breaking would be needed for a color breaking chain reaction. The open question is: Are the colliders going to produce supersymmetry charge? Because some charges in QGP can make long color breaking and a chain reaction. A long color broken QGP state in the re-Big Bang theory could explain the near infinite energy and the near infinite mass of the universe: - at first was random color QGP in the flat space-time, - at twice the color restoration in the curved space-time, which eats the Goldstinos, - and finally the baryon genesis. The re Big Bang make a supernova like collapse and a flat explosion of Universe. This explanation of SUSY hides the Goldstone fermion in the extra dimensions, the Goldstino propagate only in superspace and it is a not observable dark matter. PACS: 12.60.Jv

  8. Low voltage solid-state lateral coloration electrochromic device

    DOE Patents [OSTI]

    Tracy, C.E.; Benson, D.K.; Ruth, M.R.

    1984-12-21T23:59:59.000Z

    A solid-state transition metal oxide device comprising a plurality of layers having a predisposed orientation including an electrochromic oxide layer. Conductive material including anode and cathode contacts is secured to the device. Coloration is actuated within the electrochromic oxide layer after the application of a predetermined potential between the contacts. The coloration action is adapted to sweep or dynamically extend across the length of the electrochromic oxide layer.

  9. Low voltage solid-state lateral coloration electrochromic device

    DOE Patents [OSTI]

    Tracy, C. Edwin (Golden, CO); Benson, David K. (Golden, CO); Ruth, Marta R. (Boulder, CO)

    1987-01-01T23:59:59.000Z

    A solid-state transition metal oxide device comprising a plurality of lay having a predisposed orientation including an electrochromic oxide layer. Conductive material including anode and cathode contacts is secured to the device. Coloration is actuated within the electrochromic oxide layer after the application of a predetermined potential between the contacts. The coloration action is adapted to sweep or dynamically extend across the length of the electrochromic oxide layer.

  10. Quantum control and manipulations with stationary three-color lights

    E-Print Network [OSTI]

    S. A. Moiseev; B. S. Ham

    2006-01-04T23:59:59.000Z

    A dynamic quantum control of three-color lights in an optically dense medium is presented. We discuss how effectively to stop traveling three-color light pulses in the medium by using three control laser fields at near resonant transitions satisfying electromagnetically induced transparency. This opens a door to the quantum coherent control of multiple traveling light pulses for quantum memory and quantum switching, which are essential components in multi-party quantum optical communications.

  11. NLO Evolution of Color Dipoles in N = 4 SYM

    E-Print Network [OSTI]

    Giovanni A. Chirilli

    2008-11-21T23:59:59.000Z

    The small-$x_B$ deep inelastic scattering in the saturation region is governed by the non-linear evolution of Wilson-line operators. In the leading logarithmic approximation it is given by the BK equation for the evolution of color dipoles. I discuss recent calculation of the next-to-leading order evolution of color dipoles in QCD and ${\\cal N}=4$ SYM.

  12. Inheritance of mature green fruit color in cucumber

    E-Print Network [OSTI]

    Peterson, Gregory Calvin

    1986-01-01T23:59:59.000Z

    INHERITANCE OF MATURE GREEN FRUIT COLOR IN CUCUMBER A Thesis by GREGORY CALVIN PETERSON Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE August 1986... Major Subject: plant Breeding INHERITANCE OF MATURE GREEN FRUIT COLOR IN CUCUMBER A Thesis by GREGORY CALVIN PETERSON Approved as to style and content by: Leonard M. Pike (Chairman of Committee) J. Creighton Miller, J (Member) James D. Smith...

  13. Realistic hadronic matrix element approach to color transparency

    SciTech Connect (OSTI)

    Jennings, B.K. (TRIUMF, Vancouver, British Columbia, V6T 2A3 (Canada)); Miller, G.A. (Physics Department, FM-15, University of Washington, Seattle, Washington 98195 (United States))

    1992-12-21T23:59:59.000Z

    Color transparency occurs if a small-sized wave packet, formed in a high momentum transfer process, escapes the nucleus before expanding. The time required for the expansion depends on the masses of the baryonic components of the wave packet. Measured proton diffractive dissociation and electron deep inelastic scattering cross sections are used to examine and severely constrain the relevant masses. These constraints allow significant color transparency effects to occur at experimentally accessible momentum transfers.

  14. Two-Color Ultrafast Photoexcited Scanning Tunneling Microscopy

    SciTech Connect (OSTI)

    Camillone, N.; Dolocan, A.; Acharya, D.P.; Zahl, P.; Sutter, P.

    2011-05-26T23:59:59.000Z

    We report on two-color two-photon photoexcitation of a metal surface driven by ultrafast laser pulses and detected with a scanning tunneling microscope (STM) tip as a proximate anode. Results are presented for two cases: (i) where the tip is retracted from the surface far enough to prohibit tunneling, and (ii) where the tip is within tunneling range of the surface. A delay-modulation technique is implemented to isolate the two-color photoemission from concurrent one-color two-photon photoemission and provide subpicosecond time-resolved detection. When applied with the tip in tunneling range, this approach effectively isolates the two-photon photoexcited current signal from the conventional tunneling current and enables subpicosecond time-resolved detection of the photoexcited surface electrons. The advantage of the two-color approach is highlighted by comparison with the one-color case where optical interference causes thermal modulation of the STM tip length, resulting in tunneling current modulations that are orders of magnitude larger than the current due to photoexcitation of surface electrons. By completely eliminating this interference, and thereby avoiding thermal modulation of the STM tip length, the two-color approach represents an important step toward the ultimate goal of simultaneous subnanometer and subpicosecond measurements of surface electron dynamics by ultrafast-laser-excited STM.

  15. Initial laboratory evaluation of color video cameras: Phase 2

    SciTech Connect (OSTI)

    Terry, P.L.

    1993-07-01T23:59:59.000Z

    Sandia National Laboratories has considerable experience with monochrome video cameras used in alarm assessment video systems. Most of these systems, used for perimeter protection, were designed to classify rather than to identify intruders. The monochrome cameras were selected over color cameras because they have greater sensitivity and resolution. There is a growing interest in the identification function of security video systems for both access control and insider protection. Because color camera technology is rapidly changing and because color information is useful for identification purposes, Sandia National Laboratories has established an on-going program to evaluate the newest color solid-state cameras. Phase One of the Sandia program resulted in the SAND91-2579/1 report titled: Initial Laboratory Evaluation of Color Video Cameras. The report briefly discusses imager chips, color cameras, and monitors, describes the camera selection, details traditional test parameters and procedures, and gives the results reached by evaluating 12 cameras. Here, in Phase Two of the report, we tested 6 additional cameras using traditional methods. In addition, all 18 cameras were tested by newly developed methods. This Phase 2 report details those newly developed test parameters and procedures, and evaluates the results.

  16. Artificial selection for structural color on butterfly wings and comparison with natural evolution

    E-Print Network [OSTI]

    Cao, Hui

    of applications in color display, paint, cosmetics, and textile industries (2). Structural color surveys acrossArtificial selection for structural color on butterfly wings and comparison with natural evolution (received for review February 13, 2014) Brilliant animal colors often are produced from light interacting

  17. A Maximum Likelihood Investigation Into Color Indexing Nicu Sebe Michael S. Lew

    E-Print Network [OSTI]

    Sebe, Nicu

    the color components from the luminance compo- nent. The hue and saturation of a color are represented by H and S, and the luminance is represented by V. When we create a color histogram, we must quantize each is based on the observation that often color is used to encode functionality: grass is green, sky is blue

  18. Hardness of Approximate Hypergraph Coloring Venkatesan Guruswami Johan Hastad y Madhu Sudan z

    E-Print Network [OSTI]

    Guruswami, Venkatesan

    Hardness of Approximate Hypergraph Coloring Venkatesan Guruswami #3; Johan HÅ¡astad y Madhu Sudan #3

  19. The department maintains for each student a portfolio of assignments that received a failing grade in the courses identified for each outcome. In addition, the department

    E-Print Network [OSTI]

    Fernandez, Eduardo

    mechanics; transportation; and environmental engineering). Student portfolios will include failing grades: Environmental Science and Engineering CEG 3011C: Soil Mechanics CES 3102: Analysis of Structures TTE 4004 OF CIVIL, ENVIRONMENTAL & GEOMATICS ENGINEERING #12;COMMUNICATION (Written Communication; Oral

  20. Twin-tailed fail-over for fileservers maintaining full performance in the presence of a failure

    DOE Patents [OSTI]

    Coteus, Paul W. (Yorktown Heights, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Steinmacher-Burow, Burkhard D. (Mount Kisco, NY)

    2008-02-12T23:59:59.000Z

    A method for maintaining full performance of a file system in the presence of a failure is provided. The file system having N storage devices, where N is an integer greater than zero and N primary file servers where each file server is operatively connected to a corresponding storage device for accessing files therein. The file system further having a secondary file server operatively connected to at least one of the N storage devices. The method including: switching the connection of one of the N storage devices to the secondary file server upon a failure of one of the N primary file servers; and switching the connections of one or more of the remaining storage devices to a primary file server other than the failed file server as necessary so as to prevent a loss in performance and to provide each storage device with an operating file server.

  1. Magnetic Phases in Three-Flavor Color Superconductivity

    E-Print Network [OSTI]

    Ferrer, E J; Ferrer, Efrain J.; Incera, Vivian de la

    2007-01-01T23:59:59.000Z

    The best natural candidates for the realization of color superconductivity are quark stars -not yet confirmed by observation- and the extremely dense cores of compact stars, many of which have very large magnetic fields. To reliably predict astrophysical signatures of color superconductivity, a better understanding of the role of the star's magnetic field in the color superconducting phase that realizes in the core is required. This paper is an initial step in that direction. The field scales at which the different magnetic phases of a color superconductor with three quark flavors can be realized are investigated. Coming from weak to strong fields, the system undergoes first a symmetry transmutation from a Color-Flavor-Locked (CFL) phase to a Magnetic-CFL (MCFL) phase, and then a phase transition from the MCFL phase to the Paramagnetic-CFL (PCFL) phase. The low-energy effective theory for the excitations of the diquark condensate in the presence of a magnetic field is derived using a covariant representation ...

  2. OPTICAL COLORS OF INTRACLUSTER LIGHT IN THE VIRGO CLUSTER CORE

    SciTech Connect (OSTI)

    Rudick, Craig S.; Mihos, J. Christopher; Harding, Paul; Morrison, Heather L. [Department of Astronomy, Case Western Reserve University, 10900 Euclid Avenue, Cleveland, OH 44106 (United States); Feldmeier, John J. [Department of Physics and Astronomy, Youngstown State University, Youngstown, OH 44555 (United States); Janowiecki, Steven, E-mail: csr10@case.ed [Department of Astronomy, Indiana University, 727 East 3rd Street, Bloomington, IN 47405 (United States)

    2010-09-01T23:59:59.000Z

    We continue our deep optical imaging survey of the Virgo cluster using the CWRU Burrell Schmidt telescope by presenting B-band surface photometry of the core of the Virgo cluster in order to study the cluster's intracluster light (ICL). We find ICL features down to {mu}{sub B} {approx}29 mag arcsec{sup -2}, confirming the results of Mihos et al., who saw a vast web of low surface brightness streams, arcs, plumes, and diffuse light in the Virgo cluster core using V-band imaging. By combining these two data sets, we are able to measure the optical colors of many of the cluster's low surface brightness features. While much of our imaging area is contaminated by galactic cirrus, the cluster core near the cD galaxy, M87, is unobscured. We trace the color profile of M87 out to over 2000'', and find a blueing trend with radius, continuing out to the largest radii. Moreover, we have measured the colors of several ICL features which extend beyond M87's outermost reaches and find that they have similar colors to the M87's halo itself, B - V {approx}0.8. The common colors of these features suggest that the extended outer envelopes of cD galaxies, such as M87, may be formed from similar streams, created by tidal interactions within the cluster, that have since dissolved into a smooth background in the cluster potential.

  3. Rendering Concepts Reflectance

    E-Print Network [OSTI]

    Lischinski, Dani

    unit solid angle [W/sr] Radiance (angular flux density): radiant power per unit projected area per unit solid angle [W/(m2 sr)] 9 Photometric quantities Luminous energy [talbot] Luminous power [lumen = talbot to , per unit solid angle: ddx d xL cos ),( 2 = 6 Solid Angles (1) When defining various radiometric

  4. Multi-core and Many-core Shared-memory Parallel Raycasting Volume Rendering Optimization and Tuning

    SciTech Connect (OSTI)

    Howison, Mark

    2012-01-31T23:59:59.000Z

    Given the computing industry trend of increasing processing capacity by adding more cores to a chip, the focus of this work is tuning the performance of a staple visualization algorithm, raycasting volume rendering, for shared-memory parallelism on multi-core CPUs and many-core GPUs. Our approach is to vary tunable algorithmic settings, along with known algorithmic optimizations and two different memory layouts, and measure performance in terms of absolute runtime and L2 memory cache misses. Our results indicate there is a wide variation in runtime performance on all platforms, as much as 254% for the tunable parameters we test on multi-core CPUs and 265% on many-core GPUs, and the optimal configurations vary across platforms, often in a non-obvious way. For example, our results indicate the optimal configurations on the GPU occur at a crossover point between those that maintain good cache utilization and those that saturate computational throughput. This result is likely to be extremely difficult to predict with an empirical performance model for this particular algorithm because it has an unstructured memory access pattern that varies locally for individual rays and globally for the selected viewpoint. Our results also show that optimal parameters on modern architectures are markedly different from those in previous studies run on older architectures. And, given the dramatic performance variation across platforms for both optimal algorithm settings and performance results, there is a clear benefit for production visualization and analysis codes to adopt a strategy for performance optimization through auto-tuning. These benefits will likely become more pronounced in the future as the number of cores per chip and the cost of moving data through the memory hierarchy both increase.

  5. Color synchrotron off heavy flavor jet deluges the "dead cone"

    E-Print Network [OSTI]

    Bhattacharyya, Trambak; Abir, Raktim

    2013-01-01T23:59:59.000Z

    It is known that gluon bremsstrahlung emission off heavy flavor jet is suppressed in the forward direction compared to that of light quark due to the mass effect ($`$dead cone effect'). Most of the models that address jet quenching generally assume that a jet always travels in straight eikonal path. However, once the eikonal approximation of propagation is called off and jet is allowed to bend, additional gluons pop-up within the so called `depopulated' region deluging the dead cone. This color synchrotron by color charge, once wound in an ambiance of color field, seems to be very apt for better understanding of jet quenching in hot and dense deconfined quark-gluon medium.

  6. Cooling of Neutron Stars with Color Superconducting Quark Cores

    E-Print Network [OSTI]

    David Blaschke; Dmitri N. Voskresensky; Hovik Grigorian

    2005-11-03T23:59:59.000Z

    We show that within a recently developed nonlocal chiral quark model the critical density for a phase transition to color superconducting quark matter under neutron star conditions can be low enough for these phases to occur in compact star configurations with masses below 1.3 M_sun. We study the cooling of these objects in isolation for different values of the gravitational mass and argue that, if the quark matter phase would allow unpaired quarks, the corresponding hybrid stars would cool too fast. The comparison with observational data puts tight constraints on possible color superconducting quark matter phases. Possible candidates with diquark gaps of the order of 10 keV - 1 MeV such as the "2SC+X" and the color spin locking (CSL) phase are presented.

  7. Nuclear DVCS within the high energy QCD color dipole formalism

    E-Print Network [OSTI]

    M. V. T. Machado

    2009-05-27T23:59:59.000Z

    In this contribution, we present a study of the coherent and incoherent nuclear DVCS process in the small-$x$ regime within the color dipole formalism. Predictions for the nuclear DVCS cross section at photon level in the collider kinematics are presented.

  8. Multivariate Mathematical Morphology applied to Color Image Analysis

    E-Print Network [OSTI]

    Lefèvre, Sébastien

    Chapter 10 Multivariate Mathematical Morphology applied to Color Image Analysis 10.1. Introduction analysis framework, currently fully developed for both binary and gray-level images. Its popularity in the image processing community is mainly due to its rigorous mathematical foundation as well as its inherent

  9. Earthstone granite pavers provide a mix of colors and patterns.

    E-Print Network [OSTI]

    Earthstone granite pavers provide a mix of colors and patterns. Earthstone pavers and interior Review from Environmental Building News August 1, 2010 Earthstone's Affordable, Recycled Granite Pavers that's manufactured entirely from pre-consumer recycled granite. These pavers, as well as finished

  10. Remote multi-color excitation using femtosecond propagating surface

    E-Print Network [OSTI]

    Potma, Eric Olaf

    Remote multi-color excitation using femtosecond propagating surface plasmon polaritons in gold away from a micrometer sized focused laser spot. We attribute the observed remote nonlinear signal of unwanted heating effects at the target site and represents an attractive approach for surface

  11. Microporous Patterned Electrodes for Color-Matched Electrochromic Polymer Displays

    E-Print Network [OSTI]

    Tanner, David B.

    Microporous Patterned Electrodes for Color-Matched Electrochromic Polymer Displays Pierre of electroactive and conducting polymers offers new opportunities for the design of materials for electrochromic the most promising electrochromic (EC) properties. Here, we report the use of highly porous metallized

  12. Progress and Poverty: An Inquiry into Color Appearance Modeling

    E-Print Network [OSTI]

    Fairchild, Mark D.

    Progress and Poverty: An Inquiry into Color Appearance Modeling and Increase of Want with Increase and Poverty ... #12;Progress and Poverty: An Inquiry into the Cause of Industrial Depressions and of Increase of Want with Increase of Wealth: The Remedy Henry George, 1879 #12;Progress and Poverty by Henry George

  13. The Color of Blood: Between Sensory Experience and Epistemic Significance

    E-Print Network [OSTI]

    Bertoloni Meli, Domenico

    4 The Color of Blood: Between Sensory Experience and Epistemic Significance domenico bertoloni meli Si¯na¯-- known in the West as Avicenna--discussed the nature and composition of blood with regard to its role in nutrition. In an important passage, he argued that blood is a humor consisting of four

  14. Estimating the information available from colored surfaces in natural scenes

    E-Print Network [OSTI]

    Foster, David H.

    ´in-Franch and David H. Foster; Sensing, Imaging, and Signal Processing Group, School of Electrical and Electronic of their color will lead to errors when the illuminant on scene changes. Such errors represent a loss intervals over 400­720 nm. Further technical details are available elsewhere [14, 8, 9]. Representation

  15. Color Evolution from z=0 to z=1

    E-Print Network [OSTI]

    Karl Rakos; James Schombert

    1996-03-13T23:59:59.000Z

    Rest frame Stromgren photometry (3500A, 4100A, 4750A and 5500A) is presented for 509 galaxies in 17 rich clusters between z=0 and z=1 as a test of color evolution. Our observations confirm a strong, rest frame, Butcher-Oemler effect where the fraction of blue galaxies increases from 20% at z=0.4 to 80% at z=0.9. We also find that a majority of these blue cluster galaxies are composed of normal disk or post-starbursts systems based on color criteria. When comparing our colors to the morphological results from HST imaging, we propose that the blue cluster galaxies are a population of late-type, LSB objects who fade and are then destroyed by the cluster tidal field. After isolating the red objects from Butcher-Oemler objects, we have compared the mean color of these old, non-star forming objects with SED models in the literature as a test for passive galaxy evolution in ellipticals. We find good agreement with single burst models which predict a mean epoch of galaxy formation at z=5. Tracing the red envelope for ellipticals places the earliest epoch of galaxy formation at z=10.

  16. ON A POSSIBLE SIZE/COLOR RELATIONSHIP IN THE KUIPER BELT

    SciTech Connect (OSTI)

    Pike, R. E.; Kavelaars, J. J., E-mail: repike@uvic.ca [Department of Physics and Astronomy, University of Victoria, Victoria, BC V8W 3P6 (Canada)

    2013-10-01T23:59:59.000Z

    Color measurements and albedo distributions introduce non-intuitive observational biases in size-color relationships among Kuiper Belt Objects (KBOs) that cannot be disentangled without a well characterized sample population with systematic photometry. Peixinho et al. report that the form of the KBO color distribution varies with absolute magnitude, H. However, Tegler et al. find that KBO color distributions are a property of object classification. We construct synthetic models of observed KBO colors based on two B-R color distribution scenarios: color distribution dependent on H magnitude (H-Model) and color distribution based on object classification (Class-Model). These synthetic B-R color distributions were modified to account for observational flux biases. We compare our synthetic B-R distributions to the observed ''Hot'' and ''Cold'' detected objects from the Canada-France Ecliptic Plane Survey and the Meudon Multicolor Survey. For both surveys, the Hot population color distribution rejects the H-Model, but is well described by the Class-Model. The Cold objects reject the H-Model, but the Class-Model (while not statistically rejected) also does not provide a compelling match for data. Although we formally reject models where the structure of the color distribution is a strong function of H magnitude, we also do not find that a simple dependence of color distribution on orbit classification is sufficient to describe the color distribution of classical KBOs.

  17. Analysis of failed and nickel-coated 3093 beam clamp components at the East Tennessee Technology Park (ETTP).

    SciTech Connect (OSTI)

    Singh, D.; Pappacena, K.; Gaviria, J.; Burtsteva, T.; Nuclear Engineering Division

    2010-10-11T23:59:59.000Z

    The U.S. Department of Energy and its contractor, Bechtel Jacobs Company (BJC), are undertaking a major effort to clean up the former gaseous diffusion facility (K-25) located in Oak Ridge, TN. The decontamination and decommissioning activities require systematic removal of contaminated equipment and machinery followed by demolition of the buildings. As part of the cleanup activities, a beam clamp, used for horizontal life lines (HLLs) for fall protection, was discovered to be fractured during routine inspection. The beam clamp (yoke and D-ring) was a component in the HLL system purchased from Reliance Industries LLC. Specifically, the U-shaped stainless steel yoke of the beam clamp failed in a brittle mode at under less than 10% of the rated design capacity of 14,500 lb. The beam clamp had been in service for approximately 16 months. Bechtel Jacobs approached Argonne National Laboratory to assist in identifying the root cause of the failure of the beam clamp. The objectives of this study were to (1) review the prior reports and documents on the subject, (2) understand the possible failure mechanism(s) that resulted in the failed beam clamp components, (3) recommend approaches to mitigate the failure mechanism(s), and (4) evaluate the modified beam clamp assemblies. Energy dispersive x-ray analysis and chemical analysis of the corrosion products on the failed yoke and white residue on an in-service yoke indicated the presence of zinc, sulfur, and calcium. Analysis of rainwater in the complex, as conducted by BJC, indicated the presence of sulfur and calcium. It was concluded that, as a result of galvanic corrosion, zinc from the galvanized components of the beam clamp assembly (D-ring) migrated to the corroded region in the presence of the rainwater. Under mechanical stress, the corrosion process would have accelerated, resulting in the catastrophic failure of the yoke. As suggested by Bechtel Jacobs personnel, hydrogen embrittlement as a consequence of corrosion was also explored as a failure mechanism. Corroded and failed yoke samples had hydrogen concentrations of 20-60 ppm. However, the hydrogen content reduced to 4-11 ppm (similar to baseline as-received yoke samples) when the corrosion products were polished off. The hydrogen content in the scraped off corrosion product powders was >7000 ppm. These results indicate that hydrogen is primarily present in the corrosion products and not in the underlying steel. Rockwell hardness values on the corroded yoke and D-rings were R{sub c} {approx} 41-46. It was recommended to the beam clamp manufacturer that the beam clamp components be annealed to reduce the hardness values so that they are less susceptible to brittle failure. Upon annealing, hardness values of the beam clamp components reduced to R{sub c} {approx} 25. Several strategies were recommended and put in place to mitigate failure of the beam clamp components: (a) maintain hardness levels of both yokes and D-rings at R{sub c} < 35, (b) coat the yoke and D-rings with a dual coating of nickel (with 10% phosphorus) to delay corrosion and aluminum to prevent galvanic corrosion since it is more anodic to zinc, and (c) optimize coating thicknesses for nickel and aluminum while maintaining the physical integrity of the coatings. Evaluation of the Al- and Ni-coated yoke and D-ring specimens indicated they appear to have met the recommendations. Average hardness values of the dual-coated yokes were R{sub c} {approx} 25-35. Hardness values of dual-coated D-ring were R{sub c} {approx} 32. Measured average coating thicknesses for the aluminum and nickel coatings for yoke samples were 22 {micro}m (0.9 mils) and 80 {micro}m (3 mils), respectively. The D-rings also showed similar coating thicknesses. Microscopic examination showed that the aluminum coating was well bonded to the underlying nickel coating. Some observed damage was believed to be an artifact of the cutting-and-polishing steps during sample preparation for microscopy.

  18. The Carnegie Supernova Project: Intrinsic colors of type Ia supernovae

    SciTech Connect (OSTI)

    Burns, Christopher R.; Persson, S. E.; Freedman, Wendy L.; Madore, Barry F. [Observatories of the Carnegie Institution for Science, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Stritzinger, Maximilian; Contreras, Carlos [Department of Physics and Astronomy, Aarhus University, Ny Munkegade 120, DK-8000 Aarhus C (Denmark); Phillips, M. M.; Hsiao, E. Y.; Boldt, Luis; Campillay, Abdo; Castellón, Sergio; Morrell, Nidia; Salgado, Francisco [Carnegie Institution of Washington, Las Campanas Observatory, Colina El Pino, Casilla 601 (Chile); Folatelli, Gaston [Kavli Institute for the Physics and Mathematics of the Universe, Todai Institutes for Advanced Study, the University of Tokyo, 277-8583 Kashiwa (Japan); Suntzeff, Nicholas B. [George P. and Cynthia Woods Mitchell Institute for Fundamental Physics and Astronomy, Texas A and M University, Department of Physics and Astronomy, College Station, TX 77843 (United States)

    2014-07-01T23:59:59.000Z

    We present an updated analysis of the intrinsic colors of Type Ia supernova (SNe Ia) using the latest data release of the Carnegie Supernova Project. We introduce a new light-curve parameter very similar to stretch that is better suited for fast-declining events, and find that these peculiar types can be seen as extensions to the population of 'normal' SNe Ia. With a larger number of objects, an updated fit to the Lira relation is presented along with evidence for a dependence on the late-time slope of the B – V light-curves with stretch and color. Using the full wavelength range from u to H band, we place constraints on the reddening law for the sample as a whole and also for individual events/hosts based solely on the observed colors. The photometric data continue to favor low values of R{sub V} , though with large variations from event to event, indicating an intrinsic distribution. We confirm the findings of other groups that there appears to be a correlation between the derived reddening law, R{sub V} , and the color excess, E(B – V), such that larger E(B – V) tends to favor lower R{sub V} . The intrinsic u-band colors show a relatively large scatter that cannot be explained by variations in R{sub V} or by the Goobar power-law for circumstellar dust, but rather is correlated with spectroscopic features of the supernova and is therefore likely due to metallicity effects.

  19. An eye for vulgarity : how MoMA saw color through Wild Bill's lens

    E-Print Network [OSTI]

    Kivlan, Anna Karrer

    2007-01-01T23:59:59.000Z

    This thesis is an examination of the 1976 Museum of Modern Art exhibition of color photographs by William Eggleston-the second one-man show of color photography in the museum's history- with particular attention to the ...

  20. Ocean color observations and modeling for an optically complex site: Santa Barbara

    E-Print Network [OSTI]

    Maritorena, Stéphane

    goods and services including biogeo- chemical cycling, waste recycling, fisheries, and recreation. Our by colored dissolved organic matter and suspended sediments which only weakly covary with chlorophyll phytoplankton and colored dissolved organic matter contribute approximately equally to the total nonwater

  1. Two-color Laser Desorption of Nanostructured MgO Thin Films....

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Two-color Laser Desorption of Nanostructured MgO Thin Films. Two-color Laser Desorption of Nanostructured MgO Thin Films. Abstract: Neutral magnesium atom emission from...

  2. Use of spectroscopy for assessment of color discrimination in animal vision

    E-Print Network [OSTI]

    Akkaynak Yellin, Derya

    Animals use color vision for a number of tasks including food localization, object recognition, communication, and mate selection. For these and other specific behaviors involving the use of color cues, models that quantify ...

  3. Two-color-laser-driven direct electron acceleration in infinite vacuum

    E-Print Network [OSTI]

    Wong, Liang Jie

    We propose a direct electron acceleration scheme that uses a two-color pulsed radially polarized laser beam. The two-color scheme achieves electron acceleration exceeding 90% of the theoretical energy gain limit, over twice ...

  4. A Comparison of Interactive Color Specification Systems for Human-Computer Interfaces

    E-Print Network [OSTI]

    Wells, Evelyn Frances

    Color specification is a time-consuming and challenging task in computer graphics applications. The purpose of this research is to examine the color specification process in the context of current human-computer interface technology...

  5. Teaching color theory to children with three-dimensional computer animation

    E-Print Network [OSTI]

    Ju, Yoomi Choi

    1999-01-01T23:59:59.000Z

    generated images is an effective teaching device for helping children to understand color theory, and enhancing the traditional methods. In this study, a 3-D computer generated presentation was created and it demonstrated the mixing of primary colors...

  6. Fossilized Biophotonic Nanostructures Reveal the Original Colors of 47-Million-Year-Old Moths

    E-Print Network [OSTI]

    Cao, Hui

    lepidopterans; specimens are from the 47-million-year-old Messel oil shale (Germany). The preserved colors

  7. Revista "Computacion y Sistemas", Vol. 8, No. 4, June 2005 Segmentacion de imagenes en color utilizando

    E-Print Network [OSTI]

    Angulo,Jesús

    Revista "Computaci´on y Sistemas", Vol. 8, No. 4, June 2005 Segmentaci´on de im´agenes en color´on adecuado para el color sigue constituyendo un reto en procesado y an´alisis de las im´agenes en color segmentados sobre el espacio de la imagen color inicial. Una combinaci´on de las dos particiones, basada en la

  8. MODERN DISPLAYS: WHY WE SEE DIFFERENT COLORS, AND WHAT IT MEANS? Abhijit Sarkar1,2

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MODERN DISPLAYS: WHY WE SEE DIFFERENT COLORS, AND WHAT IT MEANS? Abhijit Sarkar1,2 , Laurent Blondé

  9. Alaska Park Science, Volume 8, Issue 1 The Colors of the Aurora

    E-Print Network [OSTI]

    Lummerzheim, Dirk

    36 #12;37 Alaska Park Science, Volume 8, Issue 1 The Colors of the Aurora By Dirk Lummerzheim Abstract The aurora has fascinated observers at high latitudes for centuries, but only recently have we that are responsible for the colors of the aurora. Observations of color balance in aurora can provide us

  10. Coat Color and Solar Heat Gain in Animals Author(s): Glenn E. Walsberg

    E-Print Network [OSTI]

    Cavitt, John F.

    when exposed to solar radiation than do light surfaces. For ani- mals such as birds or mammalsCoat Color and Solar Heat Gain in Animals Author(s): Glenn E. Walsberg Source: BioScience, Vol. 33://www.jstor.org #12;Coat Color and Solar Heat Gain in Animals Glenn E. Walsberg The relationbetween coat color

  11. Rapid Communication Orientation selectivity in luminance and color vision assessed using

    E-Print Network [OSTI]

    Mullen, Kathy T.

    Rapid Communication Orientation selectivity in luminance and color vision assessed using 2-d band in color and luminance vision using an external noise paradigm. Stimuli were spatiotem- poral patches of 2D with the stimuli orientation bandwidths that is similar for both color and luminance contrasts. This dependence

  12. Competition between color and luminance for target selection in smooth pursuit and saccadic

    E-Print Network [OSTI]

    Carrasco, Marisa

    Competition between color and luminance for target selection in smooth pursuit and saccadic eye of color and luminance for smooth pursuit and saccadic eye movements was investigated using a target selection paradigm. In two experiments, stimuli were varied along the dimensions color and luminance

  13. Light and Color in the Open Air: introduction to the feature issue

    E-Print Network [OSTI]

    Shaw, Joseph A.

    Light and Color in the Open Air: introduction to the feature issue Joseph A. Shaw,1, * Raymond L, coronas, glories, iridescence, halos, mirages, noctilucent clouds, and sky colors. The "Light & Color's wings, Conquer all mysteries by rule and line, Empty the haunted air, and gnomed mine - Unweave

  14. Color shift reduction of a multi-domain IPS-LCD using RGB-LED backlight

    E-Print Network [OSTI]

    Wu, Shin-Tson

    -emitting diodes (LEDs) and cold-cathode fluorescent lamp (CCFL) backlights. Simulation results indicateColor shift reduction of a multi-domain IPS- LCD using RGB-LED backlight Ruibo Lu, Qi Hong, Zhibing that the LED backlight exhibits a wider color gamut, better angular color uniformity, and 2-4X smaller static

  15. NEW GEOMETRIC FOURIER DESCRIPTORS FOR COLOR IMAGE RECOGNITION Jose Mennesson, Christophe Saint-Jean, Laurent Mascarilla

    E-Print Network [OSTI]

    NEW GEOMETRIC FOURIER DESCRIPTORS FOR COLOR IMAGE RECOGNITION Jos´e Mennesson, Christophe Saint are a color Fourier transform us- ing geometric algebra [1] and Generalized Fourier descrip- tors defined from the group M2 of the motion of the plane [2]. In this paper, new generalized color Fourier descrip- tors

  16. Failing in place for low-serviceability storage infrastructure using high-parity GPU-based RAID.

    SciTech Connect (OSTI)

    Curry, Matthew L.; Ward, H. Lee; Skjellum, Anthony (University of Alabama at Birmingham)

    2010-05-01T23:59:59.000Z

    In order to provide large quantities of high-reliability disk-based storage, it has become necessary to aggregate disks into fault-tolerant groups based on the RAID methodology. Most RAID levels do provide some fault tolerance, but there are certain classes of applications that require increased levels of fault tolerance within an array. Some of these applications include embedded systems in harsh environments that have a low level of serviceability, or uninhabited data centers servicing cloud computing. When describing RAID reliability, the Mean Time To Data Loss (MTTDL) calculations will often assume that the time to replace a failed disk is relatively low, or even negligible compared to rebuild time. For platforms that are in remote areas collecting and processing data, it may be impossible to access the system to perform system maintenance for long periods. A disk may fail early in a platform's life, but not be replaceable for much longer than typical for RAID arrays. Service periods may be scheduled at intervals on the order of months, or the platform may not be serviced until the end of a mission in progress. Further, this platform may be subject to extreme conditions that can accelerate wear and tear on a disk, requiring even more protection from failures. We have created a high parity RAID implementation that uses a Graphics Processing Unit (GPU) to compute more than two blocks of parity information per stripe, allowing extra parity to eliminate or reduce the requirement for rebuilding data between service periods. While this type of controller is highly effective for RAID 6 systems, an important benefit is the ability to incorporate more parity into a RAID storage system. Such RAID levels, as yet unnamed, can tolerate the failure of three or more disks (depending on configuration) without data loss. While this RAID system certainly has applications in embedded systems running applications in the field, similar benefits can be obtained for servers that are engineered for storage density, with less regard for serviceability or maintainability. A storage brick can be designed to have a MTTDL that extends well beyond the useful lifetime of the hardware used, allowing the disk subsystem to require less service throughout the lifetime of a compute resource. This approach is similar to the Xiotech ISE. Such a design can be deliberately placed remotely (without frequent support) in order to provide colocation, or meet cost goals. For workloads where reliability is key, but conditions are sub-optimal for routine serviceability, a high-parity RAID can provide extra reliability in extraordinary situations. For example, for installations requiring very high Mean Time To Repair, the extra parity can eliminate certain problems with maintaining hot spares, increasing overall reliability. Furthermore, in situations where disk reliability is reduced because of harsh conditions, extra parity can guard against early data loss due to lowered Mean Time To Failure. If used through an iSCSI interface with a streaming workload, it is possible to gain all of these benefits without impacting performance.

  17. Optimizing Spectral Color Reproduction in Multiprimary Digital David Long, Mark D. Fairchild; Munsell Color Science Laboratory, Rochester Institute of Technology; Rochester, NY

    E-Print Network [OSTI]

    Fairchild, Mark D.

    . Fairchild; Munsell Color Science Laboratory, Rochester Institute of Technology; Rochester, NY Abstract of constructing an abridged spectral reproduction display environment from P3 digital cinema-based displays

  18. Monolithic multi-color light emission/detection device

    SciTech Connect (OSTI)

    Wanlass, Mark W. (Golden, CO)

    1995-01-01T23:59:59.000Z

    A single-crystal, monolithic, tandem, multi-color optical transceiver device is described, including (a) an InP substrate having upper and lower surfaces, (b) a first junction on the upper surface of the InP substrate, (c) a second junction on the first junction. The first junction is preferably GaInAsP of defined composition, and the second junction is preferably InP. The two junctions are lattice matched. The second junction has a larger energy band gap than the first junction. Additional junctions having successively larger energy band gaps may be included. The device is capable of simultaneous and distinct multi-color emission and detection over a single optical fiber.

  19. Monolithic multi-color light emission/detection device

    SciTech Connect (OSTI)

    Wanlass, M.W.

    1995-02-21T23:59:59.000Z

    A single-crystal, monolithic, tandem, multi-color optical transceiver device is described, including (a) an InP substrate having upper and lower surfaces, (b) a first junction on the upper surface of the InP substrate, (c) a second junction on the first junction. The first junction is preferably GaInAsP of defined composition, and the second junction is preferably InP. The two junctions are lattice matched. The second junction has a larger energy band gap than the first junction. Additional junctions having successively larger energy band gaps may be included. The device is capable of simultaneous and distinct multi-color emission and detection over a single optical fiber. 5 figs.

  20. Color Superconductivity in Compact Stars and Gamma Ray Bursts

    E-Print Network [OSTI]

    A. Drago; A. Lavagno; G. Pagliara

    2003-04-08T23:59:59.000Z

    We study the effects of color superconductivity on the structure and formation of compact stars. We show that it is possible to satisfy most of recent observational boundaries on masses and radii if a diquark condensate forms in a hybrid or a quark star. Moreover, we find that a huge amount of energy, of the order of $10^{53}$ erg, can be released in the conversion from a (metastable) hadronic star into a (stable) hybrid or quark star, if the presence of a color superconducting phase is taken into account. Accordingly to the scenario proposed in Astrophys.J.586(2003)1250, the energy released in this conversion can power a Gamma Ray Burst. This mechanism can explain the recent observations indicating a delay, of the order of days or years, between a few Supernova explosions and the subsequent Gamma Ray Burst.

  1. Induced color in ostracode shells: an experimental study

    E-Print Network [OSTI]

    Kontrovitz, M.; Ainsworth, N. R.; Burnett, R. D.; Slack, J. M.

    1992-08-01T23:59:59.000Z

    ). Temp. (°C) Color Remarks 100 10YR 3/1 (very dark gray) 200 7.5YR 3.5/0 (very dark gray) 300 - 325 7.5YR 3.5/2 (dark brown) 400 - 425 7.5YR 4.5/2 (dark brown) 490 - 510 5YR 4.5/1 (dark gray) 600 - 625 5Y 4.5/2 (dark reddish gray) 700 7.5YR 6...). Temp. (°C) Color Remarks 100 10YR 3/1 (very dark gray) 200 7.5YR 3.5/0 (very dark gray) 300 - 325 7.5YR 3.5/2 (dark brown) 400 - 425 7.5YR 4.5/2 (dark brown) 490 - 510 5YR 4.5/1 (dark gray) 600 - 625 5Y 4.5/2 (dark reddish gray) 700 7.5YR 6...

  2. Color Glass Condensate in Schwinger–Keldysh QCD

    SciTech Connect (OSTI)

    Jeon, Sangyong, E-mail: jeon@physics.mcgill.ca

    2014-01-15T23:59:59.000Z

    Within the Schwinger–Keldysh representation of many-body QCD, it is shown that the leading quantum corrections to the strong classical color field are “classical” in the sense that the fluctuation field still obeys the classical Jacobi-field equation, while the quantum effects solely reside in the fluctuations of the initial field configurations. Within this context, a systematic derivation of the JIMWLK renormalization group equation is presented. A clear identification of the correct form of gauge transformation rules and the correct form of the matter-field Lagrangian in the Schwinger–Keldysh QCD is also presented. -- Highlights: •Application of the Schwinger–Keldysh formalism to many-body QCD. •Clean separation of classical and quantum degrees of freedom. •Identification of the correct coupling between the gluon field and the color source. •Identification of the correct gauge transformation rules. •Sources of the classicality and quantum corrections to JIMWLK clarified.

  3. The effects of colored quark entropy on the bag pressure

    E-Print Network [OSTI]

    Miller, David E

    2004-01-01T23:59:59.000Z

    We study the effects of the ground state entropy of colored quarks upon the bag pressure at low temperatures. The vacuum expectation values of the quark and gluon fields are used to express the interactions in QCD ground state in the limit of low temperatures and chemical potentials. Apparently, the inclusion of this entropy in the equation of state provides the hadron constituents with an additional heat which causes a decrease in the effective latent heat inside the hadronic bag and consequently decreases the non-perturbative bag pressure. We have considered two types of baryonic bags, $\\Delta$ and $\\Omega^-$. In both cases we have found that the bag pressure decreases with the temperature. On the other hand, when the colored quark ground state entropy is not considered, the bag pressure as conventionally believed remains constant for finite temperature.

  4. Fault-tolerant quantum computing with color codes

    E-Print Network [OSTI]

    Andrew J. Landahl; Jonas T. Anderson; Patrick R. Rice

    2011-08-29T23:59:59.000Z

    We present and analyze protocols for fault-tolerant quantum computing using color codes. We present circuit-level schemes for extracting the error syndrome of these codes fault-tolerantly. We further present an integer-program-based decoding algorithm for identifying the most likely error given the syndrome. We simulated our syndrome extraction and decoding algorithms against three physically-motivated noise models using Monte Carlo methods, and used the simulations to estimate the corresponding accuracy thresholds for fault-tolerant quantum error correction. We also used a self-avoiding walk analysis to lower-bound the accuracy threshold for two of these noise models. We present and analyze two architectures for fault-tolerantly computing with these codes: one with 2D arrays of qubits are stacked atop each other and one in a single 2D substrate. Our analysis demonstrates that color codes perform slightly better than Kitaev's surface codes when circuit details are ignored. When these details are considered, we estimate that color codes achieve a threshold of 0.082(3)%, which is higher than the threshold of $1.3 \\times 10^{-5}$ achieved by concatenated coding schemes restricted to nearest-neighbor gates in two dimensions but lower than the threshold of 0.75% to 1.1% reported for the Kitaev codes subject to the same restrictions. Finally, because the behavior of our decoder's performance for two of the noise models we consider maps onto an order-disorder phase transition in the three-body random-bond Ising model in 2D and the corresponding random-plaquette gauge model in 3D, our results also answer the Nishimori conjecture for these models in the negative: the statistical-mechanical classical spin systems associated to the 4.8.8 color codes are counterintuitively more ordered at positive temperature than at zero temperature.

  5. Color superconductivity in a strong external magnetic field

    E-Print Network [OSTI]

    Cristina Manuel

    2006-07-26T23:59:59.000Z

    We explore the effects of an applied strong external magnetic field in a three flavor massless color superconductor. The long-range component of the B field that penetrates the superconductor enhances some quark condensates, leading to a different condensation pattern. The external field also reduces the flavor symmetries in the system, and thus it changes drastically the corresponding low energy physics. Our considerations are relevant for the study of highly magnetized compact stars.

  6. Total neutron-nucleus cross sections and color transparency

    SciTech Connect (OSTI)

    Jennings, B.K. (TRIUMF, Vancouver, V6T2A3 (Canada)); Miller, G.A. (Nuclear Theory Group, Department of Physics, FM-15, University of Washington, Seattle, Washington 98195 (United States))

    1994-05-01T23:59:59.000Z

    The neutron-nucleus cross section at Fermi lab energies is computed using Glauber-Gribov multiple scattering theory. The effects of higher moments in the cross section fluctuations are included and their physical origin discussed. The validity of the frozen approximation is critically examined. These studies of the nucleon-nucleus total cross sections provide a test of the [ital pp][r arrow][ital Xp] diffractive amplitudes used in calculations of color transparency effects.

  7. Thermalization and Isotropization of Color-Electric Flux Tubes

    E-Print Network [OSTI]

    Ruggieri, M; Oliva, L; Plumari, S; Scardina, F; Greco, V

    2015-01-01T23:59:59.000Z

    In this study we model early times dynamics of the system produced in relativistic heavy ion collisions by an initial color electric field which then decays to a plasma by the Schwinger mechanism, coupling the dynamical evolution of the initial color field to the dynamics of the many particles system produced by the decay. The latter is described by relativistic kinetic theory in which we fix the ratio $\\eta/s$ rather than insisting on specific microscopic processes. We study isotropization and thermalization of the system produced by the field decay for a static box and for a $1+1$D expanding geometry. We find that regardless of the viscosity of the produced plasma, the initial color electric field decays within $1$ fm/c; however in the case $\\eta/s$ is large, oscillations of the field are effective along all the entire time evolution of the system, which affect the late times evolution of the ratio between longitudinal and transverse pressure. In case of small $\\eta/s$ ($\\eta/s\\lesssim0.3$) we find $\\tau_{i...

  8. Thermalization and Isotropization of Color-Electric Flux Tubes

    E-Print Network [OSTI]

    M. Ruggieri; A. Puglisi; L. Oliva; S. Plumari; F. Scardina; V. Greco

    2015-05-29T23:59:59.000Z

    In this study we model early times dynamics of the system produced in relativistic heavy ion collisions by an initial color electric field which then decays to a plasma by the Schwinger mechanism, coupling the dynamical evolution of the initial color field to the dynamics of the many particles system produced by the decay. The latter is described by relativistic kinetic theory in which we fix the ratio $\\eta/s$ rather than insisting on specific microscopic processes. We study isotropization and thermalization of the system produced by the field decay for a static box and for a $1+1$D expanding geometry. We find that regardless of the viscosity of the produced plasma, the initial color electric field decays within $1$ fm/c; however in the case $\\eta/s$ is large, oscillations of the field are effective along all the entire time evolution of the system, which affect the late times evolution of the ratio between longitudinal and transverse pressure. In case of small $\\eta/s$ ($\\eta/s\\lesssim0.3$) we find $\\tau_{isotropization}\\approx 0.8$ fm/c and $\\tau_{thermalization}\\approx 1$ fm/c in agreement with the common lore of hydrodynamics. Moreover we have investigated the effect of turning from the relaxation time approximation to the Chapman-Enskog one: we find that this improvement affects mainly the early times evolution of the physical quantities, the effect being milder in the late times evolution.

  9. Phase Structure and Instability Problem in Color Superconductivity

    E-Print Network [OSTI]

    Kenji Fukushima

    2005-10-22T23:59:59.000Z

    We address the phase structure of color superconducting quark matter at high quark density. Under the electric and color neutrality conditions there appear various phases as a result of the Fermi surface mismatch among different quark flavors induced by finite strange quark mass; the color-flavor locked (CFL) phase where quarks are all energy gapped, the u-quark superconducting (uSC) phase where u-quarks are paired with either d- or s-quarks, the d-quark superconducting (dSC) phase that is the d-quark analogue of the uSC phase, the two-flavor superconducting (2SC) phase where u- and d-quarks are paired, and the unpaired quark matter (UQM) that is normal quark matter without pairing. Besides these possibilities, when the Fermi surface mismatch is large enough to surpass the gap energy, the gapless superconducting phases are expected. We focus our discussion on the chromomagnetic instability problem related to the gapless CFL (gCFL) onset and explore the instability regions on the phase diagram as a function of the temperature and the quark chemical potential. We sketch how to reach stable physical states inside the instability regions.

  10. FAILED-DETONATION SUPERNOVAE: SUBLUMINOUS LOW-VELOCITY Ia SUPERNOVAE AND THEIR KICKED REMNANT WHITE DWARFS WITH IRON-RICH CORES

    SciTech Connect (OSTI)

    Jordan, George C. IV; Van Rossum, Daniel R. [Center for Astrophysical Thermonuclear Flashes, University of Chicago, Chicago, IL 60637 (United States); Perets, Hagai B. [Physics Department, Technion, Israel Institute of Technology, Haifa 32000 (Israel); Fisher, Robert T. [Department of Physics, University of Massachusetts Dartmouth, 285 Old Westport Road, North Dartmouth, MA 02740 (United States)

    2012-12-20T23:59:59.000Z

    Type Ia supernovae (SNe Ia) originate from the thermonuclear explosions of carbon-oxygen (C-O) white dwarfs (WDs). The single-degenerate scenario is a well-explored model of SNe Ia where unstable thermonuclear burning initiates in an accreting, Chandrasekhar-mass WD and forms an advancing flame. By several proposed physical processes, the rising, burning material triggers a detonation, which subsequently consumes and unbinds the WD. However, if a detonation is not triggered and the deflagration is too weak to unbind the star, a completely different scenario unfolds. We explore the failure of the gravitationally confined detonation mechanism of SNe Ia, and demonstrate through two-dimensional and three-dimensional simulations the properties of failed-detonation SNe. We show that failed-detonation SNe expel a few 0.1 M{sub Sun} of burned and partially burned material and that a fraction of the material falls back onto the WD, polluting the remnant WD with intermediate-mass and iron-group elements that likely segregate to the core forming a WD whose core is iron rich. The remaining material is asymmetrically ejected at velocities comparable to the escape velocity from the WD, and in response, the WD is kicked to velocities of a few hundred km s{sup -1}. These kicks may unbind the binary and eject a runaway/hypervelocity WD. Although the energy and ejected mass of the failed-detonation SN are a fraction of typical thermonuclear SNe, they are likely to appear as subluminous low-velocity SNe Ia. Such failed detonations might therefore explain or are related to the observed branch of peculiar SNe Ia, such as the family of low-velocity subluminous SNe (SN 2002cx/SN 2008ha-like SNe).

  11. The Role of Bag Surface Tension in Color Confinement

    E-Print Network [OSTI]

    K. A. Bugaev; A. I. Ivanytskyi

    2011-07-07T23:59:59.000Z

    We discuss here the novel view at the color confinement which, on the one hand, allows us to find out the surface tension coefficient of quark gluon bags and, under a plausible assumption, to determine the endpoint temperature of the QCD phase diagram, on the other hand. The present model considers the confining color tube as the cylindrical quark gluon bag with non-zero surface tension. A close inspection of the free energies of elongated cylindrical bag and the confining color tube that connects the static quark-antiquark pair allows us to find out the string tension in terms of the surface tension, thermal pressure and the bag radius. Using the derived relation it is possible to estimate the bag surface tension at zero temperature directly from the lattice QCD data and to estimate the (tri)critical endpoint temperature. In the present analysis the topological free energy of the cylindrical bag is accounted for the first time. The requirement of positive entropy density of such bags leads to negative values of the surface tension coefficient of quark gluon bags at the cross-over region, i.e. at the continuous transition to deconfined quarks and gluons. We argue that the cross-over existence at supercritical temperatures in ordinary liquids is also provided by the negative surface tension coefficient values. It is shown that the confining tube model naturally accounts for an existence of a very pronounced surprising maximum of the tube entropy observed in the lattice QCD simulations, which, as we argue, signals about the fractional surface formation of the confining tube. In addition, using the developed formalism we suggest the gas of free tubes model and demonstrate that it contains two phases.

  12. Color Glass Condensate and its relation to HERA physics

    E-Print Network [OSTI]

    Edmond Iancu

    2009-01-08T23:59:59.000Z

    I give a brief overview of the effective theory for the Color Glass Condensate, which is the high-density gluonic matter which controls high-energy scattering in QCD in the vicinity of the unitarity limit. I concentrate on fundamental phenomena, like gluon saturation, unitarization, and geometric scaling, and the way how these are encoded in the formalism. I emphasize the importance of the next-to-leading order corrections, especially the running of the coupling, for both conceptual and phenomenological issues. I survey the implications of the CGC theory for the HERA physics and its phenomenological applications based on saturation models.

  13. Color singlet and adjoint free energy at finite temperature

    E-Print Network [OSTI]

    Alexei Bazavov; Peter Petreczky; Alexander Velytsky

    2008-10-22T23:59:59.000Z

    We study correlation functions of static quark-antiquark pairs in SU(2) gauge theory at finite temperature. By measuring Polyakov loop correlators and temporal Wilson loops with APE smearing of spatial links we are able to give consistent definitions of the singlet and adjoint free energies at short distances, where the notion of these free energies is meaningful. APE smearing procedure allows to achieve a high degree of overlap in the singlet channel and to reconstruct the adjoint part from the color averaged and singlet free energy.

  14. Energy States of Colored Particle in a Chromomagnetic Field

    E-Print Network [OSTI]

    Sh. Mamedov

    2006-11-24T23:59:59.000Z

    The unitary transformation, which diagonalizes squared Dirac equation in a constant chromomagnetic field is found. Applying this transformation, we find the eigenfunctions of diagonalized Hamiltonian, that describe the states with definite value of energy and call them energy states. It is pointed out that, the energy states are determined by the color interaction term of the particle with the background chromofield and this term is responsible for the splitting of the energy spectrum. We construct supercharge operators for the diagonal Hamiltonian, that ensure the superpartner property of the energy states.

  15. Angular Momentum Mixing in a Non-spherical Color Superconductor

    E-Print Network [OSTI]

    Bo Feng; Defu Hou; Hai-cang Ren

    2007-11-28T23:59:59.000Z

    We study the angular momentum mixing effects in the color superconductor with non-spherical pairing. We first clarify the concept of the angular momentum mixing with a toy model for non-relativistic and spinless fermions. Then we derive the gap equation for the polar phase of dense QCD by minimizing the CJT free energy. The solution of the gap equation consists of all angular momentum partial waves of odd parity. The corresponding free energy is found to be lower than that reported in the literature with p-wave only.

  16. Colored knot polynomials for arbitrary pretzel knots and links

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Galakhov, D.; Melnikov, D.; Mironov, A.; Morozov, A.; Sleptsov, A.

    2015-04-01T23:59:59.000Z

    A very simple expression is conjectured for arbitrary colored Jones and HOMFLY polynomials of a rich (g+1)-parametric family of pretzel knots and links. The answer for the Jones and HOMFLY is fully and explicitly expressed through the Racah matrix of Uq(SUN), and looks related to a modular transformation of toric conformal block.Knot polynomials are among the hottest topics in modern theory. They are supposed to summarize nicely representation theory of quantum algebras and modular properties of conformal blocks. The result reported in the present letter, provides a spectacular illustration and support to this general expectation.

  17. The Rhetorics of Color-Blind Racism in Racefail 09

    E-Print Network [OSTI]

    Reid, Robin Anne

    2010-09-01T23:59:59.000Z

    The Rhetorics of Color-Blind Racism in Racefail 09 Presented at: Amazing, Fantastic, Weird: Science Fiction Studies in Texas Symposium April 15, 2010 Eduardo Bonilla-Silva Schema Anything But Race: It?s class, not race ? I am not a racist, but...) BEAR LAKE Length Words in text 28809 7331 Sentences in text 1991 463 Text Complexity Av. Word Length 4.6 4.69 Av. Sentence Length 14.4 15.8 Lexical Density Lexemes per sentence 7.58 8.36 Lexemes % of text 52.43 52...

  18. Effects of color coding on keying time and errors

    E-Print Network [OSTI]

    Wooldridge, Brenda Gail

    1983-01-01T23:59:59.000Z

    were to determine the effects if any oi' color coding upon the error rate and location time of special func- tion keys on a computer keyboard. An ACT-YA CRT keyboard interfaced with a Kromemco microcomputer was used. There were 84 high schoool... to comnunicate with more and more computer-like devices. The most common computer/human interface is the terminal, consisting of a display screen, and keyboard. The format and layout on the display screen of computer-generated information is generally...

  19. Evidence for color fluctuations in hadrons from coherent nuclear diffraction

    SciTech Connect (OSTI)

    Frankfurt, L. (Tel Aviv University, Ramat Aviv (Israel)); Miller, G.A. (Department of Physcis, FM-15, University of Washington, Seattle, Washington 98195 (United States)); Strikman, M. (Department of Physcis, Pennsylvania State University, University Park, Pennsylvania 16801 (United States))

    1993-11-01T23:59:59.000Z

    A QCD-based treatment of projectile size fluctuations is used to compute inelastic diffractive cross sections [sigma][sub diff] for coherent hadron-nuclear processes. We find that fluctuations near the average size give the major contribution to the cross section with [lt] few % contribution from small size configurations. The computed values of [sigma][sub diff] are consistent with the limited available data. The importance of coherent diffraction studies for a wide range of projectiles for high energy Fermilab fixed target experiments is emphasized. The implications of these significant color fluctuations for relativistic heavy ion collisions are discussed.

  20. Factors affecting color stability of vinegar pickled meat products

    E-Print Network [OSTI]

    Ploch, Carol Ann

    1978-01-01T23:59:59.000Z

    (1978) has defined "pickle solutions" as those solutions containing--in addi- tion to salt--other ingredients such as nitrite, erythor-. bate, color, and/or spices, whereas "brines" are solutions of salt and water only. Kramlich et al. (1973.... Cooked feet are then packed in jars and covered with 40 to 70 grain vinegar (Kramlich et al. , 1973) . Kramlich et al. (1973) also indicated that the short curing method is sometimes referred to as "hot curing" because the feet are cured and cooked...

  1. Jefferson Lab Laser Twinkles in Rare Color | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12 InvestigationLab GroupHumanLaser Twinkles in Rare Color

  2. The Planet Janitor© Coloring Book | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic|Industrial Sector, January 2000 |The Planet Janitor© Coloring Book

  3. Property:Number of Color Cameras | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:PrecourtOid JumpEligSysSizeNbrGeneratingUnitsBuild Out Unitsof Color

  4. Use of tristimulus colorimetry to measure ornamental color in little bluestem grass (Schizachyrium scoparium [Michx.] Nash) 

    E-Print Network [OSTI]

    Snowden, John Seward

    1990-01-01T23:59:59.000Z

    color within the light range perceived by the human eye (Francis and Clydesdale, 1975). The basic machinery uses a light source, three filters to imitate the responses of the human eye, and photocells. Several systems of quantification of color... using tristimulus colorimetry have been developed 11 (Francis and Clydesdale, 1975). The Hunterlab Labscan Spectro Colorimeter LS 5100 with videoscreen monitor has the capability of measuring color in four systems. Concentration here...

  5. Higgs Boson Mass predicted by the Four Color Theorem

    E-Print Network [OSTI]

    Ashay Dharwadker; Vladimir Khachatryan

    2009-12-28T23:59:59.000Z

    We show that the mathematical proof of the four color theorem yields a perfect interpretation of the Standard Model of particle physics. The steps of the proof enable us to construct the t-Riemann surface and particle frame which forms the gauge. We specify well-defined rules to match the Standard Model in a one-to-one correspondence with the topological and algebraic structure of the particle frame. This correspondence is exact - it only allows the particles and force fields to have the observable properties of the Standard Model, giving us a Grand Unified Theory. In this paper, we concentrate on explicitly specifying the quarks, gauge vector bosons, the Standard Model scalar Higgs $H^{0}$ boson and the weak force field. Using all the specifications of our mathematical model, we show how to calculate the values of the Weinberg and Cabibbo angles on the particle frame. Finally, we present our prediction of the Higgs $H^{0}$ boson mass $M_{H^{0}} = 125.992 \\simeq 126 GeV$, as a direct consequence of the proof of the four color theorem.

  6. Low energy properties of color-flavor locked superconductors

    E-Print Network [OSTI]

    Cristina Manuel

    2005-12-05T23:59:59.000Z

    We discuss some low energy properties of color-flavor locked (CFL) superconductors. First, we study how an external magnetic field affects their Goldstone physics in the chiral limit, stressing that there is a long-range component of the field that penetrates the superconductor. We note that the most remarkable effect of the applied field is giving a mass to the charged pions and kaons. By estimating this effect, we see that for values $e B \\sim 2 f_\\pi \\Delta$, where $\\Delta$ is the quark gap, and $f_\\pi$ the pion decay constant, the charged Goldstone bosons become so heavy, that they turn out to be unstable. The symmetry breaking pattern is then changed, agreeing with that of the magnetic color-flavor locked (MCFL) phase, recently proposed in hep-ph/0503162. Finally, we discuss the physics of the superfluid phonon of the CFL phase, compare it with that of the phonon of a Bose-Einstein condensate, and discuss transport phenomena at low temperature. Astrophysical implications of all the above low energy properties are also commented.

  7. Interrelation of surface tension, optical turbidity, and color of operational transformer oils

    SciTech Connect (OSTI)

    L'vov, S. Yu.; Lyut'ko, E. O.; Lankau, Ya. V.; Komarov, V. B.; Seliverstov, A. F.; Bondareva, V. N.; L'vov, Yu. N.; L'vov, M. Yu.; Ershov, B. G.

    2011-09-15T23:59:59.000Z

    Measurements of the acidity, optical turbidity, surface tension, and color of transformer oil from 54 power transformers, autotransformers, and shunt reactors are reported. Changes in surface tension, optical turbidity, and color are found to obey adequate linear correlations, while the acidity has no correlation with any of these properties. Numerical criteria for the maximum permissible state (quality) of the oil with respect to optical turbidity and color are obtained. Recommendations to operating staff are provided for cases in which the criteria for optical turbidity and color are exceeded.

  8. A novel technique for the production of cool colored concrete tile and asphalt shingle roofing products

    E-Print Network [OSTI]

    Levinson, Ronnen

    2010-01-01T23:59:59.000Z

    for providing concrete tiles, and Lou Hahn of GAF-Elk forof cool colored concrete tile and asphalt shingle roofingsolar-reflective nonwhite concrete tile and asphalt shingle

  9. A Correlation Between Inclination and Color in the Classical Kuiper Belt

    E-Print Network [OSTI]

    Chadwick A. Trujillo; Michael E. Brown

    2002-01-04T23:59:59.000Z

    We have measured broadband optical BVR photometry of 24 Classical and Scattered Kuiper belt objects (KBOs), approximately doubling the published sample of colors for these classes of objects. We find a statistically significant correlation between object color and inclination in the Classical Kuiper belt using our data. The color and inclination correlation increases in significance after the inclusion of additional data points culled from all published works. Apparently, this color and inclination correlation has not been more widely reported because the Plutinos show no such correlation, and thus have been a major contaminant in previous samples. The color and inclination correlation excludes simple origins of color diversity, such as the presence of a coloring agent without regard to dynamical effects. Unfortunately, our current knowledge of the Kuiper belt precludes us from understanding whether the color and inclination trend is due to environmental factors, such as collisional resurfacing, or primordial population effects. A perihelion and color correlation is also evident, although this appears to be a spurious correlation induced by sampling bias, as perihelion and inclination are correlated in the observed sample of KBOs.

  10. Patterned three-color ZnCdSeZnCdMgSe quantum-well structures for integrated full-color and white light emitters

    E-Print Network [OSTI]

    . This result demonstrates the feasibility of fabricating integrated full-color light emitting diode and laser American Institute of Physics. S0003-6951 00 04149-8 Light emitting diodes LEDs and laser diodes LDs having

  11. Multi-color light curves of type Ia supernovae on the color-magnitude diagram: A novel step toward more precise distance and extinction estimates

    E-Print Network [OSTI]

    Wang, Lifan; Goldhaber, Gerson; Aldering, Greg; Perlmutter, Saul

    2003-01-01T23:59:59.000Z

    Date is earlier than for supernovae with smaller ?m 15 . SeeLight Curves of Type Ia Supernovae on the Color-Magnituderelation of Type Ia supernovae after optical maximum can

  12. 904 IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS FOR VIDEO TECHNOLOGY, VOL. 12, NO. 10, OCTOBER 2002 A New Compression Scheme for Color-Quantized Images

    E-Print Network [OSTI]

    Chen, Xin

    A New Compression Scheme for Color-Quantized Images Xin Chen, Sam Kwong, and Ju-fu Feng Abstract--An efficient compression scheme for color-quantized images based on progressive coding of color information has an image from two colors to all of the colors contained in the original image, i.e., a lossless recovery

  13. Transfer matrix for spanning trees, webs and colored forests

    E-Print Network [OSTI]

    J. G. Brankov; V. S. Poghosyan; V. B. Priezzhev; P. Ruelle

    2014-05-02T23:59:59.000Z

    We use the transfer matrix formalism for dimers proposed by Lieb, and generalize it to address the corresponding problem for arrow configurations (or trees) associated to dimer configurations through Temperley's correspondence. On a cylinder, the arrow configurations can be partitioned into sectors according to the number of non-contractible loops they contain. We show how Lieb's transfer matrix can be adapted in order to disentangle the various sectors and to compute the corresponding partition functions. In order to address the issue of Jordan cells, we introduce a new, extended transfer matrix, which not only keeps track of the positions of the dimers, but also propagates colors along the branches of the associated trees. We argue that this new matrix contains Jordan cells.

  14. Color superconductivity with determinant interaction in strange quark matter

    E-Print Network [OSTI]

    Amruta Mishra; Hiranmaya Mishra

    2006-08-28T23:59:59.000Z

    We investigate the effect of six fermion determinant interaction on color superconductivity as well as on chiral symmetry breaking. Coupled mass gap equations and the superconducting gap equation are derived through the minimisation of the thermodynamic potential. The effect of nonzero quark -- antiquark condensates on the superconducting gap is derived. This becomes particularly relevant for the case of 2-flavor superconducting matter with unpaired strange quarks in the diquark channel. While the effect of six fermion interaction leads to an enhancement of u-d superconductivity, due to nonvanishing strange quark--antiquark condensates, such an enhancement will be absent at higher densities for u-s or d-s superconductivity due to early (almost) vanishing of light quark-- antiquark condensates.

  15. Automatic Microaneurysm Detection and Characterization Through Digital Color Fundus Images

    SciTech Connect (OSTI)

    Martins, Charles; Veras, Rodrigo; Ramalho, Geraldo; Medeiros, Fatima; Ushizima, Daniela

    2008-08-29T23:59:59.000Z

    Ocular fundus images can provide information about retinal, ophthalmic, and even systemic diseases such as diabetes. Microaneurysms (MAs) are the earliest sign of Diabetic Retinopathy, a frequently observed complication in both type 1 and type 2 diabetes. Robust detection of MAs in digital color fundus images is critical in the development of automated screening systems for this kind of disease. Automatic grading of these images is being considered by health boards so that the human grading task is reduced. In this paper we describe segmentation and the feature extraction methods for candidate MAs detection.We show that the candidate MAs detected with the methodology have been successfully classified by a MLP neural network (correct classification of 84percent).

  16. Color and spectral analysis of daylight in southern Europe

    E-Print Network [OSTI]

    Javier Hernández-andrés; Javier Romero; Juan L. Nieves; Raymond L. Lee

    2001-01-01T23:59:59.000Z

    We have analyzed the colorimetric and spectral characteristics of 2600 daylight spectra (global spectral irradiances on a horizontal surface) measured for all sky states during a 2-year period at Granada, Spain. We describe in detail the chromaticity coordinates, correlated color temperatures (CCT), luminous efficacies, and relative UV and IR contents of Granada daylight. The chromaticity coordinates of Granada daylight lie far above the CIE locus at high CCTs (?9000 K), and a CCT of 5700 K best typifies this daylight. Our principalcomponents analysis shows that Granada daylight spectra can be adequately represented by using sixdimensional linear models in the visible, whereas seven-dimensional models are required if we include the UV or near-IR. Yet on average only three-dimensional models are needed to reconstruct spectra that are colorimetrically indistinguishable from the original spectra. © 2001 Optical Society of America OCIS codes: 010.1290, 330.1710, 330.1730. 1.

  17. 3D Jet Tomography of the Twisted Color Glass Condensate

    E-Print Network [OSTI]

    A. Adil; M. Gyulassy; T. Hirano

    2005-09-23T23:59:59.000Z

    Jet Tomography is proposed as a new test of Color Glass Condensate (CGC) initial conditions in non-central $A+A$ collisions. The $k_{T}$ factorized CGC formalism is used to calculate the rapidity twist in the reaction plane of both the bulk low $p_T 6$ GeV partons. Unlike conventional perturbative QCD, the initial high $p_{T}$ CGC gluons are shown to be twisted even further away from the beam axis than the the low $p_T$ bulk at high rapidities $|\\eta|>2$. Differential directed flow $v_{1}(p_{T}>6,|\\eta|>2)$ is proposed to test this novel high $p_T$ rapidity twist predicted by the CGC model.

  18. The asymmetric relations among galaxy color, structure, and environment

    E-Print Network [OSTI]

    Alejandro D. Quintero; Andreas A. Berlind; MichaelR. Blanton; David W. Hogg

    2006-11-15T23:59:59.000Z

    We investigate the dependences of galaxy star-formation history and galaxy morphology on environment, using color and H-alpha equivalent width as star-formation history indicators, using concentration and central surface brightness as morphological indicators, and using clustocentric distance as an environment indicator. Clustocentric distance has the virtue that it can be measured with very high precision over a large dynamic range. We find the following asymmetry between morphological and star-formation history parameters: star-formation history parameters relate directly to the clustocentric distance while morphological parameters relate to the clustocentric distance only indirectly through their relationships with star-formation history. This asymmetry has important implications for the role that environment plays in shaping galaxy properties and it places strong constraints on theoretical models of galaxy formation. Current semi-analytic models do not reproduce this effect.

  19. Color-based tracking of plasma dust particles

    SciTech Connect (OSTI)

    Villamayor, Michelle Marie S., E-mail: mvillamayor@nip.upd.edu.ph; Soriano, Maricor N.; Ramos, Henry J. [National Institute of Physics, University of the Philippines, Diliman, Quezon City 1101 (Philippines)] [National Institute of Physics, University of the Philippines, Diliman, Quezon City 1101 (Philippines); Kato, Shuichi; Wada, Motoi [Graduate School of Engineering, Doshisha University, Kyotanabe, Kyoto 610-0321 (Japan)] [Graduate School of Engineering, Doshisha University, Kyotanabe, Kyoto 610-0321 (Japan)

    2014-02-15T23:59:59.000Z

    Color-based tracking to observe agglomeration of deposited particles inside a compact planar magnetron during plasma discharge was done by creating high dynamic range (HDR) images of photos captured by a Pentax K10D digital camera. Carbon erosion and redeposition was also monitored using the technique. The HDR images were subjected to a chromaticity-based constraint discoloration inside the plasma chamber indicating film formation or carbon redeposition. Results show that dust deposition occurs first near the evacuation pumps due to the pressure gradient and then accumulates at the positively charged walls of the chamber. This method can be applied to monitor dust formation during dusty plasma experiments without major modification of plasma devices, useful especially for large fusion reactors.

  20. Qubits from Adinkra Graph Theory via Colored Toric Geometry

    E-Print Network [OSTI]

    Aadel, Y; Benslimane, Z; Sedra, M B; Segui, A

    2015-01-01T23:59:59.000Z

    We develop a new approach to deal with qubit information systems using toric geometry and its relation to Adinkra graph theory. More precisely, we link three different subjects namely toric geometry, Adinkras and quantum information theory. This one to one correspondence may be explored to attack qubit system problems using geometry considered as a powerful tool to understand modern physics including string theory. Concretely, we examine in some details the cases of one, two, and three qubits, and we find that they are associated with \\bf CP^1, \\bf CP^1\\times CP^1 and \\bf CP^1\\times CP^1\\times CP^1 toric varieties respectively. Using a geometric procedure referred to as colored toric geometry, we show that the qubit physics can be converted into a scenario handling toric data of such manifolds by help of Adinkra graph theory. Operations on toric information can produce universal quantum gates.