Powered by Deep Web Technologies
Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Open hole packer for high pressure service in a five hundred degree fahrenheit precambrian wellbore  

DOE Green Energy (OSTI)

Massive hydraulic fracturing (MHF) from a lower wellbore (EE-2) created a large man-made reservoir which did not intersect the upper well (EE-3). To create a heat extraction flow loop, the upper well was sidetracked and redrilled (EE-3A) down into a microseismic cloud around EE-2 mapped during the MHF. The potential to intersect numerous fracture zones in the redrilled bore was apparent from seismicity. To economically and effectively isolate and test these microseismic zones required that a functional open hole packer be developed. The packer would be exposed to soak temperatures as high as 500/sup 0/F (260/sup 0/C) with cool down to 100/sup 0/F (40/sup 0/C) at differential pressures exceeding 5000 psi (35 Mpa). A functional packer has been designed, manufactured, and successfully used for the creation of a hot dry rock (HDR) reservoir. 5 figs., 1 tab.

Dreesen, D.S.; Miller, J.R.; Halbardier, F.A.; Nicholson, R.W.

1985-01-01T23:59:59.000Z

2

Advanced high efficiency concentrator cells  

DOE Green Energy (OSTI)

This report describes research to develop the technology needed to demonstrate a monolithic, multijunction, two-terminal, concentrator solar cell with a terrestrial power conversion efficiency greater than 35%. Under three previous subcontracts, Varian developed many of the aspects of a technology needed to fabricate very high efficiency concentrator cells. The current project was aimed at exploiting the new understanding of high efficiency solar cells. Key results covered in this report are as follows. (1) A 1.93-eV AlGaAs/1.42-eV GaAs metal-interconnected cascade cell was manufactured with a one-sun efficiency at 27.6% at air mass 1.5 (AM1.5) global. (2) A 1.0eV InGaAs cell was fabricated on the reverse'' side of a low-doped GaAs substrate with a one-sun efficiency of 2.5% AM1.5 diffuse and a short-circuit current of 14.4 mA/cm{sup 2}. (3) Small-scale manufacturing of GaAs p/n concentrator cells was attempted and obtained an excellent yield of high-efficiency cells. (4) Grown-in tunnel junction cell interconnects that are transparent and thermally stable using C and Si dopants were developed. 10 refs.

Gale, R. (Varian Associates, Inc., Palo Alto, CA (United States). Varian Research Center)

1992-06-01T23:59:59.000Z

3

Non-tracking solar concentrator with a high concentration ratio  

DOE Patents (OSTI)

A nontracking solar concentrator with a high concentration ratio is provided. The concentrator includes a plurality of energy absorbers which communicate with a main header by which absorbed heat is removed. Undesired heat flow of those absorbers not being heated by radiant energy at a particular instant is impeded, improving the efficiency of the concentrator.

Hinterberger, Henry (Batavia, IL)

1977-01-01T23:59:59.000Z

4

DOE High Performance Concentrator PV Project  

DOE Green Energy (OSTI)

Much in demand are next-generation photovoltaic (PV) technologies that can be used economically to make a large-scale impact on world electricity production. The U.S. Department of Energy (DOE) initiated the High-Performance Photovoltaic (HiPerf PV) Project to substantially increase the viability of PV for cost-competitive applications so that PV can contribute significantly to both our energy supply and environment. To accomplish such results, the National Center for Photovoltaics (NCPV) directs in-house and subcontracted research in high-performance polycrystalline thin-film and multijunction concentrator devices with the goal of enabling progress of high-efficiency technologies toward commercial-prototype products. We will describe the details of the subcontractor and in-house progress in exploring and accelerating pathways of III-V multijunction concentrator solar cells and systems toward their long-term goals. By 2020, we anticipate that this project will have demonstrated 33% system efficiency and a system price of $1.00/Wp for concentrator PV systems using III-V multijunction solar cells with efficiencies over 41%.

McConnell, R.; Symko-Davies, M.

2005-08-01T23:59:59.000Z

5

High-efficiency silicon concentrator cell commercialization  

SciTech Connect

This report summarizes the first phase of a forty-one month program to develop a commercial, high-efficiency concentrator solar cell and facility for manufacturing it. The period covered is November 1, 1990 to December 31, 1991. This is a joint program between the Electric Power Research Institute (EPRI) and Sandia National Laboratories. (This report is also published by EPRI as EPRI report number TR-102035.) During the first year of the program, SunPower accomplished the following major objectives: (1) a new solar cell fabrication facility, which is called the Cell Pilot Line (CPL), (2) a baseline concentrator cell process has been developed, and (3) a cell testing facility has been completed. Initial cell efficiencies are about 23% for the baseline process. The long-range goal is to improve this efficiency to 27%.

Sinton, R.A.; Swanson, R.M. [SunPower Corp., Sunnyvale, CA (US)

1993-05-01T23:59:59.000Z

6

Low Cost High Concentration PV Systems for Utility Power Generation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home Low Cost High Concentration PV Systems for Utility Power Generation Low Cost High Concentration PV Systems for Utility Power Generation An...

7

Low Cost High Concentration PV Systems for Utility Power Generation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home Low Cost High Concentration PV Systems for Utility Power Generation Amonix, Inc. Low Cost High Concentration PV Systems for Utility Power...

8

High-efficiency concentrator silicon solar cells  

DOE Green Energy (OSTI)

This report presents results from extensive process development in high-efficiency Si solar cells. An advanced design for a 1.56-cm{sup 2} cell with front grids achieved 26% efficiency at 90 suns. This is especially significant since this cell does not require a prismatic cover glass. New designs for simplified backside-contact solar cells were advanced from a status of near-nonfunctionality to demonstrated 21--22% for one-sun cells in sizes up to 37.5 cm{sup 2}. An efficiency of 26% was achieved for similar 0.64-cm{sup 2} concentrator cells at 150 suns. More fundamental work on dopant-diffused regions is also presented here. The recombination vs. various process and physical parameters was studied in detail for boron and phosphorous diffusions. Emitter-design studies based solidly upon these new data indicate the performance vs design parameters for a variety of the cases of most interest to solar cell designers. Extractions of p-type bandgap narrowing and the surface recombination for p- and n-type regions from these studies have a generality that extends beyond solar cells into basic device modeling. 68 refs., 50 figs.

Sinton, R.A.; Cuevas, A.; King, R.R.; Swanson, R.M. (Stanford Univ., CA (USA). Solid-State Electronics Lab.)

1990-11-01T23:59:59.000Z

9

Biological denitrification of high concentration nitrate waste  

DOE Patents (OSTI)

Biological denitrification of nitrate solutions at concentrations of greater than one kilogram nitrate per cubic meter is accomplished anaerobically in an upflow column having as a packing material a support for denitrifying bacteria.

Francis, Chester W. (Oak Ridge, TN); Brinkley, Frank S. (Knoxville, TN)

1977-01-01T23:59:59.000Z

10

Multijunction Photovoltaic Technologies for High-Performance Concentrators: Preprint  

DOE Green Energy (OSTI)

Multijunction solar cells provide high-performance technology pathways leading to potentially low-cost electricity generated from concentrated sunlight. The National Center for Photovoltaics at the National Renewable Energy Laboratory has funded different III-V multijunction solar cell technologies and various solar concentration approaches. Within this group of projects, III-V solar cell efficiencies of 41% are close at hand and will likely be reported in these conference proceedings. Companies with well-developed solar concentrator structures foresee installed system costs of $3/watt--half of today's costs--within the next 2 to 5 years as these high-efficiency photovoltaic technologies are incorporated into their concentrator photovoltaic systems. These technology improvements are timely as new large-scale multi-megawatt markets, appropriate for high performance PV concentrators, open around the world.

McConnell, R.; Symko-Davies, M.

2006-05-01T23:59:59.000Z

11

Improving efficiency of high-concentrator photovoltaics by cooling with  

NLE Websites -- All DOE Office Websites (Extended Search)

Improving efficiency of high-concentrator photovoltaics by cooling with Improving efficiency of high-concentrator photovoltaics by cooling with two-phase forced convection Title Improving efficiency of high-concentrator photovoltaics by cooling with two-phase forced convection Publication Type Journal Article Year of Publication 2010 Authors Ho, Tony, Samuel S. Mao, and Ralph Greif Journal International Journal of Energy Research Volume 34 Start Page 1257 Issue 14 Pagination 1257-1271 Date Published 11/2010 Keywords high-concentrator photovoltaic efficiency, two-phase flow cooling applications Abstract The potential of increasing high-concentrator photovoltaic cell efficiency by cooling with two-phase flow is analyzed. The governing energy equations were used to predict cell temperature distributions and cell efficiencies for a photovoltaic cell under 100 suns' concentration. Several design conditions were taken into consideration in the analysis, including cooling channel height, working fluid type (between water and R134a), working fluid inlet temperature, pressure, and mass flow rate. It was observed that the dominant parameter for increasing cell efficiency was the working fluid saturation temperature, which itself is affected by a number of the aforementioned design parameters. The results show R134a at low inlet pressures to be highly effective in this two-phase cooling design.

12

Hydrogen concentration and distribution in high-purity germanium crystals  

DOE Green Energy (OSTI)

High-purity germanium crystals used for making nuclear radiation detectors are usually grown in a hydrogen ambient from a melt contained in a high-purity silica crucible. The benefits and problems encountered in using a hydrogen ambient are reviewed. A hydrogen concentration of about 2 x 10/sup 15/cm/sup -3/ has been determined by growing crystals in hydrogen spiked with tritium and counting the tritium ..beta..-decays in detectors made from these crystals. Annealing studies show that the hydrogen is strongly bound, either to defects or as H/sub 2/ with a dissociation energy > 3 eV. This is lowered to 1.8 eV when copper is present. Etching defects in dislocation-free crystals grown in hydrogen have been found by etch stripping to have a density of about 1 x 10/sup 7/ cm/sup -3/ and are estimated to contain 10/sup 8/ H atoms each.

Hansen, W.L.; Haller, E.E.; Luke, P.N.

1981-10-01T23:59:59.000Z

13

Immersion Cooling of Photovoltaic Cells in Highly Concentrated Solar Beams.  

E-Print Network (OSTI)

??Concentrated solar radiation can be utilized to generate electrical power from photovoltaic cells, but concentrated solar radiation increases the photovoltaic cell’s temperature. This increase in… (more)

Darwish, Ahmed

2011-01-01T23:59:59.000Z

14

Design and development of a high-concentration and high-efficiency photovoltaic concentrator using a curved Fresnel lens  

DOE Green Energy (OSTI)

Thermo Electron has designed a high concentration photovoltaic module that uses a domed, point-focus Fresnel lens. Their design, design optimization process, and results from lens and receiver tests are described in this report. A complete module has not been fabricated and probably will not be fabricated in the future; however, Thermo Electron's optical design, analysis, and testing of both secondary optical units and domed Fresnel lenses have made a significant contribution to our project. Tooling errors prevented the lens from reaching its potential efficiency by the end of the contract, and resolution of these tooling problems is currently being attempted with a follow-on contract, No. 68-9463.

Scharlack, R.S.; Moffat, A.

1983-08-01T23:59:59.000Z

15

NREL GIS Data: Continental United States High Resolution Concentrating  

Open Energy Info (EERE)

High Resolution Concentrating High Resolution Concentrating Solar Power Dataset Summary Description Abstract: Monthly and annual average solar resource potential for the lower 48 states of the United States of America. Purpose: Provide information on the solar resource potential for the for the lower 48 states of the United States of America. Supplemental_Information: This data provides monthly average and annual average daily total solar resource averaged over surface cells of approximatley 40 km by 40 km in size. This data was developed from the Climatological Solar Radiation (CSR) Model. The CSR model was developed by the National Renewable Energy Laboratory for the U.S. Department of Energy. Specific information about this model can be found in Maxwell, George and Wilcox (1998) and George and Maxwell (1999). This model uses information on cloud cover, atmostpheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and sky) falling on a horizontal surface. The cloud cover data used as input to the CSR model are an 7-year histogram (1985-1991) of monthly average cloud fraction provided for grid cells of approximately 40km x 40km in size. Thus, the spatial resolution of the CSR model output is defined by this database. The data are obtained from the National Climatic Data Center in Ashville, North Carolina, and were developed from the U.S. Air Force Real Time Nephanalysis (RTNEPH) program. Atmospheric water vapor, trace gases, and aerosols are derived from a variety of sources. The procedures for converting the collector at latitude tilt are described in Marion and Wilcox (1994). Where possible, existing ground measurement stations are used to validate the data. Nevertheless, there is uncertainty associated with the meterological input to the model, since some of the input parameters are not avalible at a 40km resolution. As a result, it is believed that the modeled values are accurate to approximately 10% of a true measured value within the grid cell. Due to terrain effects and other micoclimate influences, the local cloud cover can vary significantly even within a single grid cell. Furthermore, the uncertainty of the modeled estimates increase with distance from reliable measurement sources and with the complexity of the terrain.

16

HYDROGEN CONCENTRATION AND DISTRIBUTION IN HIGH-PURITY GERMANIUM CRYSTALS  

E-Print Network (OSTI)

melting point. By analogy, hydrogen permeation measurementsin silicon suggest that the hydrogen solubility also is notNo. 1, February 1982 HYDROGEN CONCENTRATION AND DISTRIBUTION

Hansen, W.L.

2010-01-01T23:59:59.000Z

17

Bandgap Engineering in High-Efficiency Multijunction Concentrator Cells  

DOE Green Energy (OSTI)

This paper discusses semiconductor device research paths under investigation with the aim of reaching the milestone efficiency of 40%. A cost analysis shows that achieving very high cell efficiencies is crucial for the realization of cost-effective photovoltaics, because of the strongly leveraging effect of efficiency on module packaging and balance-of systems costs. Lattice-matched (LM) GaInP/ GaInAs/ Ge 3-junction cells have achieved the highest independently confirmed efficiency at 175 suns, 25?C, of 37.3% under the standard AM1.5D, low-AOD terrestrial spectrum. Lattice-mismatched, or metamorphic (MM), materials offer still higher potential efficiencies, if the crystal quality can be maintained. Theoretical efficiencies well over 50% are possible for a MM GaInP/ 1.17-eV GaInAs/ Ge 3-junction cell limited by radiative recombination at 500 suns. The bandgap - open circuit voltage offset, (Eg/q) - Voc, is used as a valuable theoretical and experimental tool to characterize multijunction cells with subcell bandgaps ranging from 0.7 to 2.1 eV. Experimental results are presented for prototype 6-junction cells employing an active {approx}1.1-eV dilute nitride GaInNAs subcell, with active-area efficiency greater than 23% and over 5.3 V open-circuit voltage under the 1-sun AM0 space spectrum. Such cell designs have theoretical efficiencies under the terrestrial spectrum at 500 suns concentration exceeding 55% efficiency, even for lattice-matched designs.

King, R. R.; Sherif, R. A.; Kinsey, G. S.; Kurtz, S.; Fetzer, C. M.; Edmondson, K. M.; Law, D. C.; Cotal, H. L.; Krut, D. D.; Ermer, J. H.; Karam, N. H.

2005-08-01T23:59:59.000Z

18

Development of manufacturing capability for high-concentration, high-efficiency silicon solar cells  

DOE Green Energy (OSTI)

This report presents a summary of the major results from a program to develop a manufacturable, high-efficiency silicon concentrator solar cell and a cost-effective manufacturing facility. The program was jointly funded by the Electric Power Research Institute, Sandia National Laboratories through the Concentrator Initiative, and SunPower Corporation. The key achievements of the program include the demonstration of 26%-efficient silicon concentrator solar cells with design-point (20 W/cm{sup 2}) efficiencies over 25%. High-performance front-surface passivations; that were developed to achieve this result were verified to be absolutely stable against degradation by 475 days of field exposure at twice the design concentration. SunPower demonstrated pilot production of more than 1500 of these cells. This cell technology was also applied to pilot production to supply 7000 17.7-cm{sup 2} one-sun cells (3500 yielded wafers) that demonstrated exceptional quality control. The average efficiency of 21.3% for these cells approaches the peak efficiency ever demonstrated for a single small laboratory cell within 2% (absolute). Extensive cost models were developed through this program and calibrated by the pilot-production project. The production levels achieved indicate that SunPower could produce 7-10 MW of concentrator cells per year in the current facility based upon the cell performance demonstrated during the program.

Sinton, R.A.; Verlinden, P.J.; Crane, R.A.; Swanson, R.N. [SunPower Corp., Sunnyvale, CA (United States)

1996-10-01T23:59:59.000Z

19

SunShot Initiative: High-Concentration, Low-Cost Parabolic Trough...  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Concentration, Low-Cost Parabolic Trough System for Baseload CSP to someone by E-mail Share SunShot Initiative: High-Concentration, Low-Cost Parabolic Trough System for...

20

Integration of High Efficiency Solar Cells on Carriers for Concentrating System Applications .  

E-Print Network (OSTI)

??High efficiency multi-junction (MJ) solar cells were packaged onto receiver systems. The efficiency change of concentrator cells under continuous high intensity illumination was done. Also,… (more)

Chow, Simon Ka Ming

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

The Production of High-Quality Magnesite Ore Concentrate With ...  

Science Conference Proceedings (OSTI)

Thus, high-quality magnesite ore with permroll type magnetic separators, were produced. ... Environmental Assessment of Li-CNT Battery Production.

22

Emulsion explosives containing high concentrations of calcium nitrate  

SciTech Connect

A water-in-oil emulsion blasting agent is described having a discontinuous aqueous oxidizer salt solution phase which contains a calcium nitrate (CN) to ammonium nitrate (AN) weight ratio of 1.5 or greater, a continuous oil or water-immiscible liquid organic phase, an emulsifier, and, optionally, a density reducing agent. It is found that emulsion slurry blasting agents containing this relatively high amount of CN to AN have properties that conventional emulsion slurry explosives, those containing more AN than CN or solely AN, do not. Specifically, one property is that the high-CN emulsion blasting agents of the present composition can have much smaller critical diameters but yet pass the US DOT Blasting Agent tests. This result will be shown in the examples that follow. Thus, if AN is present as the principal oxidizer salt, emulsion explosives that have small critical diameters, and even those with relatively large critical diameters, generally are too sensitive to pass the Blasting Agent tests. If CN is the principal oxidizer, the emulsion blasting agents are less sensitive and more likely to pass the tests. This effect of CN has commercial significance. 10 claims.

Jessop, H.A.; Funk, A.G.

1982-10-26T23:59:59.000Z

23

High active carrier concentration in n-type, thin film Ge using delta-doping  

E-Print Network (OSTI)

We demonstrate CVD in situ doping of Ge by utilizing phosphorus delta-doping for the creation of a high dopant diffusion source. Multiple monolayer delta doping creates source phosphorous concentrations above 1 × 10[superscript ...

Cai, Yan

24

Compact high-flux two-stage solar collectors based on tailored edge-ray concentrators  

SciTech Connect

The recently-invented tailored edge-ray concentrator (TERC) approach permits the design of compact two-stage high-flux solar collectors, with a focusing primary reflector and a non-imaging TERC secondary reflector. We present a new primary reflector shape based on the TERC approach and a secondary TERC tailored to its particular flux map, such that more compact concentrators emerge at flux concentration levels in excess of 90% of the thermodynamic limit. Calculations and raytrace simulation results are also offered which demonstrate that V-cone approximations to a wide variety of TERCs attain the concentration of the TERC to within a few percent. These V-cones represent practical secondary concentrators that may be superior to corresponding compound parabolic concentrator or trumpet secondaries. 13 refs., 5 figs., 2 tabs.

Friedman, R.P. [Ben-Gurion Univ. of the Negev, Sede Boqer Campus (Israel); Gordon, J.M. [Ben-Gurion Univ. of the Negev, Sede Boqer Campus (Israel)]|[Ben-Gurion Univ. of the Negev, Beersheva (Israel); Ries, H. [Paul Scherrer Inst., Villigen (Switzerland)

1996-06-01T23:59:59.000Z

25

New high-flux two-stage optical designs for parabolic solar concentrators  

SciTech Connect

We present a new two-stage optical design for parabolic dish concentrators that can realistically attain close to 90% of the thermodynamic limit to concentration with practical, compact designs (e.g., at parabola rim half-angles of around 45[degrees]). For comparison, the parabolic dish-plus-compound parabolic concentrator secondary design, at this rim angle, achieves no more than 50% of the thermodynamic limit. Our new secondary concentrator is tailored to accept edge rays from the parabolic primary, and incurs less than one reflection on average. It necessitates displacing the absorber from the parabola's focal plane, along the concentrator's optic axis, toward the primary reflector, and constructing the secondary between the absorber and the primary. The secondary tailored edge-ray concentrators described here create new possibilities for building compact, extremely high flux solar furnaces and/or commercial parabolic dish systems.

Friedman, R.P.; Gordon, J.M. (Ben-Gurion Univ. of the Negev, Sede Boqer (Israel) Ben-Gurion Univ. of the Negev, Beersheva (Israel)); Ries, H. (Weizmann Institute of Science, Rehovot (Israel))

1993-11-01T23:59:59.000Z

26

Stable, concentrated solutions of high molecular weight polyaniline and articles therefrom  

DOE Patents (OSTI)

Stable, concentrated solutions of high molecular weight polyaniline. In order to process high quality fibers and other articles possessing good mechanical properties, it is known that solution concentrations of the chosen polymer should be in the range from 15-30% (w/w). Moreover, it is desirable to use the highest molecular weight consistent with the solubility properties of the polymer. However, such solutions are inherently unstable, forming gels before processing can be achieved. The present invention describes the addition gel inhibitors (GIs) to the polymer solution, thereby permitting high concentrations (between 15% and 30% (w/w)) of high molecular weight ((M.sub.w)>120,000, and (M.sub.n)>30,000) emeraldine base (EB) polyaniline to be dissolved. Secondary amines have been used for this purpose in concentrations which are small compared to those which might otherwise be used in a cosolvent role therefor. The resulting solutions are useful for generating excellent fibers, films, coatings and other objects, since the solutions are stable for significant time periods, and the GIs are present in too small concentrations to cause polymer deterioration. It is demonstrated that the GIs found to be useful do not act as cosolvents, and that gelation times of the solutions are directly proportional to the concentration of GI. In particular, there is a preferred concentration of GI, which if exceeded causes structural and electrical conductivity degradation of resulting articles. Heating of the solutions significantly improves solubility.

Mattes, Benjamin R. (Santa Fe, NM); Wang, Hsing-Lin (Los Alamos, NM)

1999-11-09T23:59:59.000Z

27

Stable, concentrated solutions of high molecular weight polyaniline and articles therefrom  

DOE Patents (OSTI)

Stable, concentrated solutions of high molecular weight polyaniline. In order to process high quality fibers and other articles possessing good mechanical properties, it is known that solution concentrations of the chosen polymer should be in the range from 15-30% (w/w). Moreover, it is desirable to use the highest molecular weight consistent with the solubility properties of the polymer. However, such solutions are inherently unstable, forming gels before processing can be achieved. The present invention describes the addition gel inhibitors (GIs) to the polymer solution, thereby permitting high concentrations (>15% (w/w)) of high molecular weight ((M.sub.w)>120,000, and (M.sub.n)>30,000) emeraldine base (EB) polyaniline to be dissolved. Secondary amines have been used for this purpose in concentrations which are small compared to those which might otherwise be used in a cosolvent role therefor. The resulting solutions are useful for generating excellent fibers, films, coatings and other objects, since the solutions are stable for significant time periods, and the GIs are present in too small concentrations to cause polymer deterioration. It is demonstrated that the GIs found to be useful do not act as cosolvents, and that gelation times of the solutions are directly proportional to the concentration of GI. In particular, there is a preferred concentration of GI, which if exceeded causes structural and electrical conductivity degradation of resulting articles. Heating of the solutions significantly improves solubility.

Mattes, Benjamin R. (Sante Fe, NM); Wang, Hsing-Lin (Los Alamos, NM)

2000-01-01T23:59:59.000Z

28

Low Cost High Concentration PV Systems for Utility Power Generation Amonix,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Amonix, Inc. Amonix, Inc. Low Cost High Concentration PV Systems for Utility Power Generation Amonix, Inc. A series of brief fact sheet on various topics including:Low Cost High Concentration PV Systems for Utility Power Generation,High Efficiency Concentrating Photovoltaic Power System,Reaching Grid Parity Using BP Solar Crystalline Silicon Technology, Fully Integrated Building Science Solutions for Residential and Commercial Photovoltaic Energy Generation,A Value Chain Partnership to Accelerate U.S. Photovoltaic Industry Growth,AC Module PV System,Flexible Organic Polymer-Based PV For Building Integrated Commercial Applications,Flexable Integrated PV System,Delivering Grid-Parity Solar Electricity On Flat Commercial Rooftops,Fully Automated Systems Technology, Concentrating Solar Panels: Bringing the Highest Power and Lowest Cost to

29

Analytical Study of High Concentration PCB Paint at the Heavy Water Components Test Reactor  

SciTech Connect

This report provides results of an analytical study of high concentration PCB paint in a shutdown nuclear test reactor located at the US Department of Energy's Savannah River Site (SRS). The study was designed to obtain data relevant for an evaluation of potential hazards associated with the use of and exposure to such paints.

Lowry, N.J.

1998-10-21T23:59:59.000Z

30

Attaining and using extremely high intensities of solar energy with non-imaging concentrators  

SciTech Connect

Using the principles and techniques of non-imaging optics, solar concentrations that approach the theoretical maximum can be achieved. In this paper, the authors review recent progress in attaining, measuring, and using such ultrahigh solar fluxes. In particular, they review the design principles for optimized two-stage concentrators and solar furnaces and discuss the characteristics and properties of a variety of non-imaging secondaries which have been employed. These include Compound Parabolic Concentrators (CPC) type secondaries, Dielectric Totally Internally Reflecting Concentrators (DTIRC), and flow-line or {open_quotes}trumpet{close_quotes} concentrators. The usual design is a configuration where {phi}, the rim angle of the primary, is small, that is, corresponding to a system with a relatively large focal length to diameter (F/D) ratio. All three types of secondary are characterized by a design acceptance angle {phi}{sub a} which must be greater than or equal to {phi}. The design parameters and trade-offs for each of these systems including strategies for choice of particular secondary and degree of truncation, are presented. The authors review the calorimetric techniques used to measure these high intensities and describe a newly developed technique for {open_quotes}extracting{close_quotes} light from inside a high index medium. Finally they review a number of potential applications for highly concentrated solar energy and the current status of the associated technology. By making possible new and unique applications for intense solar flux, these techniques have opened a whole new frontier for research and development of potential economic uses of solar energy. 63 refs., 34 figs., 3 tabs.

Jenkins, D.; O`Gallagher, J.; Winston, R.

1997-12-31T23:59:59.000Z

31

RADIOACTIVE HIGH LEVEL WASTE TANK PITTING PREDICTIONS: AN INVESTIGATION INTO CRITICAL SOLUTION CONCENTRATIONS  

Science Conference Proceedings (OSTI)

A series of cyclic potentiodynamic polarization tests was performed on samples of ASTM A537 carbon steel in support of a probability-based approach to evaluate the effect of chloride and sulfate on corrosion the steel?s susceptibility to pitting corrosion. Testing solutions were chosen to systemically evaluate the influence of the secondary aggressive species, chloride, and sulfate, in the nitrate based, high-level wastes. The results suggest that evaluating the combined effect of all aggressive species, nitrate, chloride, and sulfate, provides a consistent response for determining corrosion susceptibility. The results of this work emphasize the importance for not only nitrate concentration limits, but also chloride and sulfate concentration limits.

Hoffman, E.

2012-11-08T23:59:59.000Z

32

Advanced high efficiency concentrator cells. Final subcontractor report, 1 October 1988--31 March 1990  

DOE Green Energy (OSTI)

This report describes research to develop the technology needed to demonstrate a monolithic, multijunction, two-terminal, concentrator solar cell with a terrestrial power conversion efficiency greater than 35%. Under three previous subcontracts, Varian developed many of the aspects of a technology needed to fabricate very high efficiency concentrator cells. The current project was aimed at exploiting the new understanding of high efficiency solar cells. Key results covered in this report are as follows. (1) A 1.93-eV AlGaAs/1.42-eV GaAs metal-interconnected cascade cell was manufactured with a one-sun efficiency at 27.6% at air mass 1.5 (AM1.5) global. (2) A 1.0eV InGaAs cell was fabricated on the ``reverse`` side of a low-doped GaAs substrate with a one-sun efficiency of 2.5% AM1.5 diffuse and a short-circuit current of 14.4 mA/cm{sup 2}. (3) Small-scale manufacturing of GaAs p/n concentrator cells was attempted and obtained an excellent yield of high-efficiency cells. (4) Grown-in tunnel junction cell interconnects that are transparent and thermally stable using C and Si dopants were developed. 10 refs.

Gale, R. [Varian Associates, Inc., Palo Alto, CA (United States). Varian Research Center

1992-06-01T23:59:59.000Z

33

High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrator Application  

DOE Green Energy (OSTI)

The High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrators project seeks to provide new photovoltaic cells for Concentrator Photovoltaics (CPV) Systems with higher cell efficiency, more favorable temperature coefficients and less sensitivity to changes in spectral distribution. The main objective of this project is to provide high efficiency III-V solar cells that will reduce the overall cost per Watt for power generation using CPV systems.This work is focused both on a potential near term application, namely the use of indium arsenide (InAs) QDs to spectrally "tune" the middle (GaAs) cell of a SOA triple junction device to a more favorable effective bandgap, as well as the long term goal of demonstrating intermediate band solar cell effects. The QDs are confined within a high electric field i-region of a standard GaAs solar cell. The extended absorption spectrum (and thus enhanced short circuit current) of the QD solar cell results from the increase in the sub GaAs bandgap spectral response that is achievable as quantum dot layers are introduced into the i-region. We have grown InAs quantum dots by OMVPE technique and optimized the QD growth conditions. Arrays of up to 40 layers of strain balanced quantum dots have been experimentally demonstrated with good material quality, low residual stain and high PL intensity. Quantum dot enhanced solar cells were grown and tested under simulated one sun AM1.5 conditions. Concentrator solar cells have been grown and fabricated with 5-40 layers of QDs. Testing of these devices show the QD cells have improved efficiency compared to baseline devices without QDs. Device modeling and measurement of thermal properties were performed using Crosslight APSYS. Improvements in a triple junction solar cell with the insertion of QDs into the middle current limiting junction was shown to be as high as 29% under one sun illumination for a 10 layer stack QD enhanced triple junction solar cell. QD devices have strong potential for net gains in efficiency at high concentration.

Hubbard, Seth

2012-09-12T23:59:59.000Z

34

Highly Efficient 32.3% Monolithic GaInP/GaAs/Ge Triple Junction Concentrator Solar Cells  

DOE Green Energy (OSTI)

Based on recent cell improvements for space applications, multijunction cells apear to be ideal candidates for high efficiency, cost effective, PV concentrator systems.

Cotal, H. L.; Lillington, D. R.; Ermer, J. H.; King, R. R.; Karam, N. H.; Kurtz, S. R.; Friedman, D. J.; Olson, J. M.; Ward, S.; Duda, A.; Emery, K. A.; Moriarty, T.

2000-01-01T23:59:59.000Z

35

Numerical Modeling of the Stability of Face-Centered Cubic Metals with High Vacancy Concentration  

DOE Green Energy (OSTI)

The objective of this research is to assess the possibility of forming an atomically porous structure in a low-density metal, e.g., Al with vacancies up to 0.20/lattice site; and to examine the effects of hydrogen and vacancy concentration on the stability of an atomically porous structure that has been experimentally produced in nickel. The approach involves numerical modeling using the Embedded-Atom Method (EAM). High vacancy concentrations cause the Al lattice to disorder at 300K. In contrast, Ni retains the face-centered-cubic structure at 300K for vacancy concentrations up to 0.15 Vac/lattice site. Unexpectedly, the lattice with 0.15 Vac/lattice site is more stable than the lattice with 0.10 or 0.20 Vac/lattice site. The Ni systems with 0.10 and 0.15 Vac/lattice site exhibit domains consisting of uniform lattice rotations. The Ni lattice with 0.15 Vac/lattice site is more stable with an initial distribution of random vacancies compared to ordered vacancies. The equilibrium lattice structures of Ni a d Al containing vacancies and H are less ordered to structures with vacancies only at 300K.

Brian P. Somerday; M. I. Baskes

1998-12-01T23:59:59.000Z

36

A Universal Intrinsic Scale of Hole Concentration for High-Tc Cuprates  

E-Print Network (OSTI)

We have measured thermoelectric power (TEP) as a function of hole concentration per CuO2 layer, Ppl, in Y1-xCaxBa2Cu3O6 (Ppl = x/2) with no oxygen in the Cu-O chain layer. The room-temperature TEP as a function of Ppl, S290(Ppl), of Y1-xCaxBa2Cu3O6 behaves identically to that of La2-zSrzCuO4 (Ppl = z). We argue that S290(Ppl) represents a measure of the intrinsic equilibrium electronic states of doped holes and, therefore, can be used as a common scale for the carrier concentrations of layered cuprates. We shows that the Ppl determined by this new universal scale is consistent with both hole concentration microscopically determined by NQR and the hole concentration macroscopically determined by the Cu valency. We find two characteristic scaling temperatures, TS* and TS2*, in the TEP vs. temperature curves that change systematically with doping. Based on the universal scale, we uncover a universal phase diagram in which almost all the experimentally determined pseudogap temperatures as a function of Ppl fall on two common curves; upper pseudogap temperature defined by the TS* versus Ppl curve and lower pseudogap temperature defined by the TS2* versus Ppl curve. We find that while pseudogaps are intrinsic properties of doped holes of a single CuO2 layer for all high-Tc cuprates, Tc depends on the number of layers, therefore the inter-layer coupling, in each individual system.

T. Honma; P. H. Hor; H. H. Hsieh; M. Tanimoto

2003-09-25T23:59:59.000Z

37

An Instrument for Measuring the TRU Concentration in High-Level Liquid Waste  

Science Conference Proceedings (OSTI)

An online monitor has been designed, built, and tested that is capable of measuring the residual transuranic concentrations in processed high-level wastes with a detection limit of 370 Bq/ml (10 nCi/ml) in less than six hours. The monitor measures the ({alpha},n) neutrons in the presence of gamma-ray fields up to 1 Sv/h (100 R/h). The optimum design was determined by Monte Carlo modeling and then tempered with practical engineering and cost considerations. A multiplicity counter is used in data acquisition to reject the large fraction of coincident and highly variable cosmic-ray-engendered background events and results in a S/N ratio {approx}1.

Brodzinski, Ronald L.; Craig, R A.; Fink, Samuel D.; Hensley, Walter K.; Holt, Noah OA; Knopf, Michael A.; Lepel, Elwood A.; Mullen, O Dennis; Salaymeh, Saleem R.; Samuel, Todd J.; Smart, John E.; Tinker, Mike R.; Walker, D

2005-02-01T23:59:59.000Z

38

An Istrument for Measuring the TRU Concentration in High-Level Liquid Waste  

Science Conference Proceedings (OSTI)

An online monitor has been designed, built, and tested, which is capable of measuring the residual transuranic concentrations in processed high-level wastes with a detection limit of 370 Bq/ml (10 nCi/ml) in less than six hours. The monitor measures the neutrons produced by the transuranics, primarily via (?,n) reactions, in the presence of gamma-ray fields up to 1 Sv/h (100 R/h). The optimum design was determined by Monte Carlo modeling and then tempered with practical engineering and cost considerations. Correct operation of the monitor was demonstrated in a hot cell utilizing an actual sample of high-level waste. Results of that demonstration are given, and suggestions for improvements in the next generation system are discussed.

Brodzinski, Ronald L.; Craig, R. A.; Fink, Samuel D.; Hensley, Walter K.; Holt, Noah O.; Knopf, Michael A.; Lepel, Elwood A.; Mullen, O Dennis; Salaymeh, Saleem R.; Samuel, Todd J.; Smart, John E.; Tinker, Michael R.; Walker, Darrell D.

2005-02-01T23:59:59.000Z

39

High-temperature photochemical destruction of toxic organic wastes using concentrated solar radiation  

DOE Green Energy (OSTI)

Application of concentrated solar energy has been proposed to be a viable waste disposal option. Specifically, this concept of solar induced high-temperature photochemistry is based on the synergistic contribution of concentrated infrared (IR) radiation, which acts as an intense heating source, and near ultraviolet and visible (UV-VIS) radiation, which can induce destructive photochemical processes. Some significant advances have been made in the theoretical framework of high-temperature photochemical processes (Section 2) and development of experimental techniques for their study (Section 3). Basic thermal/photolytic studies have addressed the effect of temperature on the photochemical destruction of pure compounds (Section 4). Detailed studies of the destruction of reaction by-products have been conducted on selected waste molecules (Section 5). Some very limited results are available on the destruction of mixtures (Section 6). Fundamental spectroscopic studies have been recently initiated (Section 7). The results to date have been used to conduct some relatively simple scale-up studies of the solar detoxification process. More recent work has focused on destruction of compounds that do not directly absorb solar radiation. Research efforts have focused on homogeneous as well as heterogeneous methods of initiating destructive reaction pathways (Section 9). Although many conclusions at this point must be considered tentative due to lack of basic research, a clearer picture of the overall process is emerging (Section 10). However, much research remains to be performed and most follow several veins, including photochemical, spectroscopic, combustion kinetic, and engineering scale-up (Section 11).

Dellinger, B.; Graham, J.L.; Berman, J.M.; Taylor, P.H. [Dayton Univ., OH (United States)

1994-05-01T23:59:59.000Z

40

Improved high temperature solar absorbers for use in Concentrating Solar Power central receiver applications.  

DOE Green Energy (OSTI)

Concentrating solar power (CSP) systems use solar absorbers to convert the heat from sunlight to electric power. Increased operating temperatures are necessary to lower the cost of solar-generated electricity by improving efficiencies and reducing thermal energy storage costs. Durable new materials are needed to cope with operating temperatures >600 C. The current coating technology (Pyromark High Temperature paint) has a solar absorptance in excess of 0.95 but a thermal emittance greater than 0.8, which results in large thermal losses at high temperatures. In addition, because solar receivers operate in air, these coatings have long term stability issues that add to the operating costs of CSP facilities. Ideal absorbers must have high solar absorptance (>0.95) and low thermal emittance (<0.05) in the IR region, be stable in air, and be low-cost and readily manufacturable. We propose to utilize solution-based synthesis techniques to prepare intrinsic absorbers for use in central receiver applications.

Stechel, Ellen Beth; Ambrosini, Andrea; Hall, Aaron Christopher; Lambert, Timothy L.; Staiger, Chad Lynn; Bencomo, Marlene

2010-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Design of a 20-kWp photovoltaic concentrator experiment at Fauquier High School, Warrenton, VA  

DOE Green Energy (OSTI)

The design and systems analysis of the photovoltaic concentrator system for Fauquier High School in Warrenton, Virginia, are presented. The system provides both electrical energy from the photovoltaic modules and thermal energy from the cooling of those modules. The dc electrical energy from the photovoltaic modules will be first converted to ac and then used to provide power for lighting in the vocational/technical building and the system control building. The thermal energy collected is stored in a 6500-gallon tank for use in the wintertime to provide heat for a greenhouse located adjacent to the array. The photovoltaic system supplies 20 kWp of electrical power by means of 40 6' wide by 10' long parabolic-cylinder collectors mounted in a polar mode. (WHK)

None

1979-10-18T23:59:59.000Z

42

Method and source for producing a high concentration of positively charged molecular hydrogen or deuterium ions  

DOE Patents (OSTI)

A high concentration of positive molecular ions of hydrogen or deuterium gas is extracted from a positive ion source having a short path length of extracted ions, relative to the mean free path of the gas molecules, to minimize the production of other ion species by collision between the positive ions and gas molecules. The ion source has arrays of permanent magnets to produce a multi-cusp magnetic field in regions remote from the plasma grid and the electron emitters, for largely confining the plasma to the space therebetween. The ion source has a chamber which is short in length, relative to its transverse dimensions, and the electron emitters are at an even shorter distance from the plasma grid, which contains one or more extraction apertures.

Ehlers, Kenneth W. (Alamo, CA); Leung, Ka-Ngo (Hercules, CA)

1988-01-01T23:59:59.000Z

43

Method and source for producing a high concentration of positively charged molecular hydrogen or deuterium ions  

DOE Patents (OSTI)

One principal object of the present invention is to provide a novel method and apparatus for generating a high concentration of H/sub 2//sup +/ or D/sub 2//sup +/ ions by using a new and improved multicusp ion source. The basic principle in achieving a high percentage of H/sub 2//sup +/ or D/sub 2//sup +/ ions is to extract them from the source as soon as they are produced. Otherwise they will react with background gas molecules to form tri-atomic ions H/sub 3//sup +/ or D/sub 3//sup +/ or be dissociated by electrons. The former reaction H/sub 2//sup +/ + H/sub 2/ ..-->.. H/sub 3//sup +/ + H can have a very short mean free path length lambda. Assuming a background neutral gas density of approximately 3.3 x 10/sup 13/ cm/sup -3/ and a cross-section sigma of approximately 6 x 10/sup -15/ cm/sup 2/, lambda = (n/sub 0/ sigma)/sup -1/ is estimated to be about 5 cm. Thus the distance traversed by the H/sub 2//sup +/ ion before it arrives at the extractor electrode cannot exceed this value. This in turn sets a limit on the length of the source chamber.

Ehlers, K.W.; Leung, K.N.

1983-07-26T23:59:59.000Z

44

Participation in multilateral effort to develop high performance integrated CPC evacuated collectors. [Compound Parabolic Concentrator (CPC)  

SciTech Connect

The University of Chicago Solar Energy Group has had a continuing program and commitment to develop an advanced evacuated solar collector integrating nonimaging concentration into its design. During the period from 1985--1987, some of our efforts were directed toward designing and prototyping a manufacturable version of an Integrated Compound Parabolic Concentrator (ICPC) evacuated collector tube as part of an international cooperative effort involving six organizations in four different countries. This multilateral'' project made considerable progress towards a commercially practical collector. One of two basic designs considered employed a heat pipe and an internal metal reflector CPC. We fabricated and tested two large diameter (125mm) borosilicate glass collector tubes to explore this concept. The other design also used a large diameter (125mm) glass tube but with a specially configured internal shaped mirror CPC coupled to a U-tube absorber. Performance projections in a variety of systems applications using the computer design tools developed by the International Energy Agency (IEA) task on evacuated collectors were used to optimize the optical and thermal design. The long-term goal of this work continues to be the development of a high efficiency, low cost solar collector to supply solar thermal energy at temperatures up to 250{degree}C. Some experience and perspectives based on our work are presented and reviewed. Despite substantial progress, the stability of research support and the market for commercial solar thermal collectors were such that the project could not be continued. A cooperative path involving university, government and industrial collaboration remains the most attractive near term option for developing a commercial ICPC.

Winston, R.; O'Gallagher, J.J.

1992-05-31T23:59:59.000Z

45

The Characterization of Bimodal Droplet Size Distributions in the Ultrafiltration of Highly Concentrated Emulsions Applied to the Production of Biodiesel .  

E-Print Network (OSTI)

??A non-reactive model system comprising a highly concentrated and unstable oil-in-water emulsion was used to investigate the retention of oil by the membrane in producing… (more)

Falahati, Hamid

2010-01-01T23:59:59.000Z

46

Low-Cost High-Concentration Photovoltaic Systems for Utility Power Generation  

DOE Green Energy (OSTI)

Under DOE's Technology Pathway Partnership (TPP) program, Amonix, Inc. developed a new generation of high-concentration photovoltaic systems using multijunction technology and established the manufacturing capacity needed to supply multi-megawatt power plants buing using the new Amonix 7700-series solar energy systems. For this effort, Amonix Collaborated with a variety of suppliers and partners to complete project tasks. Subcontractors included: Evonik/Cyro; Hitek; the National Renewable Energy Laboratory (NREL); Raytech; Spectrolab; UL; University of Nevada, Las Vegas; and TUV Rheinland PTL. The Amonix TPP tasks included: Task 1: Multijunction Cell Optimization for Field Operation, Task 2: Fresnel Lens R&D, Task 3: Cell Package Design & Production, Task 4: Standards Compliance and Reliability Testing, Task 5: Receiver Plate Production, Task 6: MegaModule Performance, Task 7: MegaModule Cost Reduction, Task 8: Factory Setup and MegaModule Production, Task 9: Tracker and Tracking Controller, Task 10: Installation and Balance of System (BOS), Task 11: Field Testing, and Task 12: Solar Advisor Modeling and Market Analysis. Amonix's TPP addressed nearly the complete PV value chain from epitaxial layer design and wafer processing through system design, manufacturing, deployment and O&M. Amonix has made progress toward achieving these reduced costs through the development of its 28%+ efficient MegaModule, reduced manufacturing and installation cost through design for manufacturing and assembly, automated manufacturing processes, and reduced O&M costs. Program highlights include: (1) Optimized multijunction cell and cell package design to improve performance by > 10%; (2) Updated lens design provided 7% increased performance and higher concentration; (3) 28.7% DC STC MegaModule efficiency achieved in Phase II exceeded Phase III performance goal; (4) New 16' focal length MegaModule achieved target materials and manufacturing cost reduction; (5) Designed and placed into production 25 MW/yr manufacturing capacity for complete MegaModules, including cell packages, receiver plates, and structures with lenses; (6) Designed and deployed Amonix 7700 series systems rated at 63 kW PTC ac and higher. Based on an LCOE assessment using NREL's Solar Advisor Model, Amonix met DOE's LCOE targets: Amonix 2011 LCOE 12.8 cents/kWh (2010 DOE goal 10-15); 2015 LCOE 6.4 cents/kWh (2015 goal 5-7) Amonix and TPP participants would like to thank the U.S. Department of Energy Solar Energy Technology Program for funding received under this program through Agreement No. DE-FC36-07GO17042.

McConnell, R.; Garboushian, V.; Gordon, R.; Dutra, D.; Kinsey, G.; Geer, S.; Gomez, H.; Cameron, C.

2012-03-31T23:59:59.000Z

47

INTERNATIONAL STUDIES OF ENHANCED WASTE LOADING AND IMPROVED MELT RATE FOR HIGH ALUMINA CONCENTRATION NUCLEAR WASTE GLASSES  

SciTech Connect

The goal of this study was to determine the impacts of glass compositions with high aluminum concentrations on melter performance, crystallization and chemical durability for Savannah River Site (SRS) and Hanford waste streams. Glass compositions for Hanford targeted both high aluminum concentrations in waste sludge and a high waste loading in the glass. Compositions for SRS targeted Sludge Batch 5, the next sludge batch to be processed in the Defense Waste Processing Facility (DWPF), which also has a relatively high aluminum concentration. Three frits were selected for combination with the SRS waste to evaluate their impact on melt rate. The glasses were melted in two small-scale test melters at the V. G. Khlopin Radium Institute. The results showed varying degrees of spinel formation in each of the glasses. Some improvements in melt rate were made by tailoring the frit composition for the SRS feeds. All of the Hanford and SRS compositions had acceptable chemical durability.

Fox, K; David Peeler, D; James Marra, J

2008-09-11T23:59:59.000Z

48

Potential Role of Concentrating Solar Power in Enabling High Renewables Scenarios in the United States  

Science Conference Proceedings (OSTI)

This work describes the analysis of concentrating solar power (CSP) in two studies -- The SunShot Vision Study and the Renewable Electricity Futures Study -- and the potential role of CSP in a future energy mix.

Denholm, P.; Hand, M.; Mai, T.; Margolis, R.; Brinkman, G.; Drury, E.; Mowers, M.; Turchi, C.

2012-10-01T23:59:59.000Z

49

Nox control for high nitric oxide concentration flows through combustion-driven reduction  

DOE Patents (OSTI)

An improved method for removing nitrogen oxides from concentrated waste gas streams, in which nitrogen oxides are ignited with a carbonaceous material in the presence of substoichiometric quantities of a primary oxidant, such as air. Additionally, reductants may be ignited along with the nitrogen oxides, carbonaceous material and primary oxidant to achieve greater reduction of nitrogen oxides. A scrubber and regeneration system may also be included to generate a concentrated stream of nitrogen oxides from flue gases for reduction using this method.

Yeh, James T. (Bethel Park, PA); Ekmann, James M. (Bethel Park, PA); Pennline, Henry W. (Bethel Park, PA); Drummond, Charles J. (Churchill, PA)

1989-01-01T23:59:59.000Z

50

The effects of concentrated ultraviolet light on high-efficiency silicon solar cells  

DOE Green Energy (OSTI)

The importance of stability in the performance of solar cells is clearly recognized as fundamental. Some of the highest efficiency silicon solar cells demonstrated to date, such as the Point Contact solar cell and the Passivated Emitter solar cell, rely upon the passivation of cell surfaces in order to minimize recombination, which reduces cell power output. Recently, it has been shown that exposure to ultraviolet (UV) light of wavelengths present in the terrestrial solar spectrum can damage a passivating silicon-oxide interface and increase recombination. In this study, we compared the performance of Point Contact and Passivated Emitter solar cells after exposure to UV light. We also examined the effect of UV exposure on oxide-passivated silicon wafers. We found that current Passivated Emitter designs are stable at both one-sun and under concentrated sunlight. The evolution of Point Contact concentrator cell performance shows a clear trend towards more stable cells. 15 refs., 18 figs.

Ruby, D.S.; Schubert, W.K.

1991-01-01T23:59:59.000Z

51

Manufacturing of ultra-high efficiency thin-film concentrator cells  

DOE Green Energy (OSTI)

This report describes a research project to study developments required to expedite commercializing the GaAs solar cell concentrator technology. We baseline the GaAs concentrator cell and 1000X module design into pilot operation at Kopin Corporation. To attain these improvements, we will use Kopin's existing pilot line to produce cleavage of lateral epitaxial film for transfer (CLEFT) GaAs solar cells; these cells already exhibit efficiencies of about 24% at air mass 1.5. We will modify the CLEFT cell to form concentrators that perform well at 500--1000 suns. We will derive the know-how for this modification from an integration of Kopin and VS Corporation technologies. The pilot line will be broadened to include cell receiver and module assembly, using VS Corporation technology obtained from Varian as a baseline. A second-generation design will be formulated to address improvements in the module, and these will be incorporated into the pilot line along with the CLEFT concentrator cell. In parallel, we integrate Kopin's CLEFT GaAs cell technology with the advanced AlGaAs and InGaAs material technology obtained by VS Corporation from Varian to develop a near-term, two-junction mechanical stack with an efficiency of 35%. The receiver thus developed will be compatible with a three-junction approach that has been proposed elsewhere by Kopin. Using a three-junction stack can yield an efficiency of over 40%, and when such cells become available, the pilot line process will have been designed to use them. 11 refs.

Gale, R. (Kopin Corp., Taunton, MA (United States))

1992-02-01T23:59:59.000Z

52

Design Of A Hybrid Jet Impingement / Microchannel Cooling Device For Densely Packed PV Cells Under High Concentration  

Science Conference Proceedings (OSTI)

A hybrid jet impingement / microchannel cooling scheme was designed and applied to densely packed PV cells under high concentration. An experimental study allows validating the principles of the design and confirming its applicability to the cited system. In order to study the characteristics of the device in a wide range of conditions

Jérôme Barrau; Joan Rosell; Manel Ibańez

2010-01-01T23:59:59.000Z

53

High-Flux Stress Testing of Encapsulants for Medium-Concentration CPV Applications  

DOE Green Energy (OSTI)

This study involved developing methods to expose transparent encapsulant materials to high (40 to 45 UV suns) optical fluxes of UV radiation to enable rapid evaluation of materials.

Kempe, M. D.; Kilkenny, M.; Moricone, T. J.; Zhang, J. Z.

2009-09-01T23:59:59.000Z

54

NREL GIS Data: Hawaii High Resolution Concentrating Solar Power | OpenEI  

Open Energy Info (EERE)

Concentrating Solar Power Concentrating Solar Power Dataset Summary Description Abstract - Monthly and annual average solar resource potential for the state of Hawaii. Purpose - Provide information on the solar resource potential for the state of Hawaii. The insolation values represent the average solar energy available to a concentrating collector on a 2-axis tracker, such as a dish or a power tower. Supplemental Info - This data provides monthly average and annual average daily total solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. This data was developed using the State University of New York/Albany satellite radiation model. This model was developed by Dr. Richard Perez and collaborators at the National Renewable Energy Laboratory and other universities for the U.S. Department of Energy. Specific information about this model can be found in Perez, et al. (2002). This model uses hourly radiance images from geostationary weather satellites, daily snow cover data, and monthly averages of atmospheric water vapor, trace gases, and the amount of aerosols in the atmosphere to calculate the hourly total insolation (sun and sky) falling on a horizontal surface. Atmospheric water vapor, trace gases, and aerosols are derived from a variety of sources. A modified Bird model is used to calculate clear sky direct normal (DNI). This is then adjusted as a function of the ratio of clear sky global horizontal (GHI) and the model predicted GHI. Where possible, existing ground measurement stations are used to validate the data. Nevertheless, there is uncertainty associated with the meterological input to the model, since some of the input parameters are not avalable at a 10km resolution. As a result, it is believed that the modeled values are accurate to approximately 15% of a true measured value within the grid cell. Due to terrain effects and other microclimate influences, the local cloud cover can vary significantly even within a single grid cell. Furthermore, the uncertainty of the modeled estimates increase with distance from reliable measurement sources and with the complexity of the terrain.

55

Applicability of the sludge processing technical standard to type IV waste tanks with high fluoride concentration  

SciTech Connect

Type IV waste tanks at the Savannah River Plant which contain ballast water (tanks 17, 18, 19, 20, and 24) have solution compositions that are generally within the database developed for corrosion protection of the sludge processing tanks. Therefore the technical standard covering tank chemistry limits during sludge processing is applicable to the Type TV tanks. However, Tank 20 contains levels of fluoride higher than those treated in the sludge processing database. To confirm the applicability of the sludge processing technical standard, cyclic potentiodynamic polarization scans for pitting susceptibility were run in a simulant of the Tank 20 contents. The nitrite inhibitor level specified by the standards did inhibit pitting corrosion in the simulant. Pitting was inhibited also at the same nitrite level but with 30 percent higher concentrations of chloride, fluoride, and sulfate. Thus the sludge processing technical standard has been shown to provide corrosion protection to type IV tanks containing ballast water.

Zapp, P.E.

1992-03-31T23:59:59.000Z

56

Micro-optics for high-efficiency optical performance and simplified tracking for concentrated photovoltaics (CPV).  

SciTech Connect

Micro-optical 5mm lenses in 50mm sub-arrays illuminate arrays of photovoltaic cells with 49X concentration. Fine tracking over {+-}10{sup o} FOV in sub-array allows coarse tracking by meter-sized solar panels. Plastic prototype demonstrated for 400nm < {lambda} < 1600 nm. We have designed a solar collector that will be composed of 50-mm-diameter sub-arrays, each containing {approx}100 5-mm plastic micro-lenses. Each micro-lens illuminates a stack of about four 0.7mm PV cells that collect sunlight from 400nm to 1600 nm with a theoretical efficiency approaching 50%. Each sub-array has internal solar tracking and alignment over a {+-}10{sup o} field, so a large array of sub-arrays only needs to coarsely track the sun. The refractive lenses in the design are thin so the optical transmission can be >90% and the optics will weigh very little. There are other optical properties incorporated in this design that help the photovoltaic cells to operate very efficiently. We are building a pre-prototype system now, and will describe our progress at the conference.

Sinclair, Michael B.; Filatov, Anton; Lentine, Anthony L.; Sweatt, William C.; Nielson, Gregory N.; Okandan, Murat; Jared, Bradley Howell

2010-02-01T23:59:59.000Z

57

Phenylnaphthalene as a Heat Transfer Fluid for Concentrating Solar Power: High-Temperature Static Experiments  

SciTech Connect

Concentrating solar power (CSP) may be an alternative to generating electricity from fossil fuels; however, greater thermodynamic efficiency is needed to improve the economics of CSP operation. One way of achieving improved efficiency is to operate the CSP loop at higher temperatures than the current maximum of about 400 C. ORNL has been investigating a synthetic polyaromatic oil for use in a trough type CSP collector, to temperatures up to 500 C. The oil was chosen because of its thermal stability and calculated low vapor and critical pressures. The oil has been synthesized using a Suzuki coupling mechanism and has been tested in static heating experiments. Analysis has been conducted on the oil after heating and suggests that there may be some isomerization taking place at 450 C, but the fluid appears to remain stable above that temperature. Tests were conducted over one week and further tests are planned to investigate stabilities after heating for months and in flow configurations. Thermochemical data and thermophysical predictions indicate that substituted polyaromatic hydrocarbons may be useful for applications that run at higher temperatures than possible with commercial fluids such as Therminol-VP1.

Bell, Jason R [ORNL; Joseph III, Robert Anthony [ORNL; McFarlane, Joanna [ORNL; Qualls, A L [ORNL

2012-05-01T23:59:59.000Z

58

Method for producing high carrier concentration p-Type transparent conducting oxides  

DOE Patents (OSTI)

A method for producing transparent p-type conducting oxide films without co-doping plasma enhancement or high temperature comprising: a) introducing a dialkyl metal at ambient temperature and a saturated pressure in a carrier gas into a low pressure deposition chamber, and b) introducing NO alone or with an oxidizer into the chamber under an environment sufficient to produce a metal-rich condition to enable NO decomposition and atomic nitrogen incorporation into the formed transparent metal conducting oxide.

Li, Xiaonan (Evergreen, CO); Yan, Yanfa (Littleton, CO); Coutts, Timothy J. (Golden, CO); Gessert, Timothy A. (Conifer, CO); Dehart, Clay M. (Westminster, CO)

2009-04-14T23:59:59.000Z

59

A single diffractive optical element for implementing spectrum-splitting and beam-concentration functions simultaneously with high diffraction efficiency  

E-Print Network (OSTI)

In this paper, a novel method is proposed, and employed to design a single diffractive optical element (DOE) for implementing spectrum-splitting and beam-concentration (SSBC) functions simultaneously. We develop an optimization algorithm, through which the SSBC DOE can be optimized within an arbitrary thickness range, according to the limitations of modern photolithography technology. Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency. It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.

Ye, Jia-Sheng; Huang, Qing-Li; Dong, Bi-Zhen; Zhang, Yan; Yang, Guo-Zhen

2013-01-01T23:59:59.000Z

60

Processing high solids concentration of municipal solid waste by anaerobic digester for methane production  

SciTech Connect

Cellulosic solids are pretreated by calcium hydroxide to produce salts of volatile orangic acids and other water-soluble substances. Pure cellulose, sawdust, and waste paper are used as model substances for the study of alkaline degradation. It is found that sawdust is more difficult to degrade than the other two substances. The cooking conditions for high conversion of model substances and high yeild of orangic acids are found to be 275/degree/C to 300/degree/C with the corresponding reaction time from 30 minutes to 15 minutes. The cooking liquor can be readily fermented in an anaerobic fluidized-bed digester for methane production. The cooking liquor from different reaction conditions can all be digested by the methanogens. Higher than 90% of COD can be removed under the conditions of low organic loading rate (<2.0 g COD/1/day) and low hydraulic retention time (1.5 to 2.0 days). 14 refs., 10 figs., 2 tabs.

Tsao, G.T.

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

GaInP/GaAs/GaInAs Monolithic Tandem Cells for High-Performance Solar Concentrators  

DOE Green Energy (OSTI)

We present a new approach for ultra-high-performance tandem solar cells that involves inverted epitaxial growth and ultra-thin device processing. The additional degree of freedom afforded by the inverted design allows the monolithic integration of high-, and medium-bandgap, lattice-matched (LM) subcell materials with lower-bandgap, lattice-mismatched (LMM) materials in a tandem structure through the use of transparent compositionally graded layers. The current work concerns an inverted, series-connected, triple-bandgap, GaInP (LM, 1.87 eV)/GaAs (LM, 1.42 eV)/GaInAs (LMM, {approx}1 eV) device structure grown on a GaAs substrate. Ultra-thin tandem devices are fabricated by mounting the epiwafers to pre-metallized Si wafer handles and selectively removing the parent GaAs substrate. The resulting handle-mounted, ultra-thin tandem cells have a number of important advantages, including improved performance and potential reclamation/reuse of the parent substrate for epitaxial growth. Additionally, realistic performance modeling calculations suggest that terrestrial concentrator efficiencies in the range of 40-45% are possible with this new tandem cell approach. A laboratory-scale (0.24 cm2), prototype GaInP/GaAs/GaInAs tandem cell with a terrestrial concentrator efficiency of 37.9% at a low concentration ratio (10.1 suns) is described, which surpasses the previous world efficiency record of 37.3%.

Wanlass, M. W.; Ahrenkiel, S. P.; Albin, D. S.; Carapella, J. J.; Duda, A.; Emery, K.; Geisz, J. F.; Jones, K.; Kurtz, S.; Moriarty, T.; Romero, M. J.

2005-08-01T23:59:59.000Z

62

100-NR-2 Apatite Treatability Test FY09 Status: High Concentration Calcium-Citrate-Phosphate Solution Injection for In Situ Strontium-90 Immobilization  

SciTech Connect

100-NR-2 Apatite Treatability Test FY09 Status: High Concentration Calcium-Citrate-Phosphate Solution Injection for In Situ Strontium-90 Immobilization INTERIM LETTER REPORT

Vermeul, Vincent R.; Fritz, Brad G.; Fruchter, Jonathan S.; Szecsody, James E.; Williams, Mark D.

2009-12-16T23:59:59.000Z

63

FRIT DEVELOPMENT FOR HIGH LEVEL WASTE SLUDGE BATCH 5: COMPOSITIONAL TRENDS FOR VARYING ALUMINUM CONCENTRATIONS  

Science Conference Proceedings (OSTI)

The objective of this study was to experimentally measure the properties and performance of a series of glasses with compositions that could represent Sludge Batch 5 (SB5) as processed at the Defense Waste Processing Facility (DWPF). The data was used to provide recommendations to the Liquid Waste Organization (LWO) regarding blending and washing strategies in preparing SB5 based on acceptability of the glass compositions. These data were also used to guide frit optimization efforts as the SB5 composition was finalized. Glass compositions for this study were developed by combining a series of SB5 composition projections with a group of frits. Three composition projections for SB5 were developed using a model-based approach at Savannah River National Laboratory (SRNL). These compositions, referred to as SB5 Cases B, C and D, projected removal of 25, 50 and 75% (respectively) of the aluminum in Tank 51 through the low temperature aluminum dissolution process. The frits for this study (Frits 530 through 537) were selected based on their predicted operating windows (i.e., ranges of waste loadings over which the predicted properties of the glasses were acceptable) and their potential (based on historical trends) to provide acceptable melt rates for SB5. Six additional glasses were designed to evaluate alternatives for uranium in DWPF-type glasses used for variability studies and some scoping studies. Since special measures are necessary when working with uranium-containing glasses in the laboratory, it is desirable as a cost and time saving measure to find an alternative for uranium to support frit optimization efforts. Hafnium and neodymium were investigated as potential surrogates for uranium, and other glasses were made by simply excluding the radioactive components and renormalizing the glass composition. The study glasses were fabricated and characterized at SRNL. Chemical composition analyses suggested only minor difficulties in meeting the targeted compositions for some of the oxides for some of the glasses. Although minor differences were observed, they did not have a significant impact on the conclusions made in this study. Several of the study compositions showed retention of more than 0.5 wt% SO{sub 4}{sup 2-} in glass. Trevorite (a spinel) was the only crystalline phase that was positively identified in a few of the study glasses after the canister centerline cooled (CCC) heat treatment. Spinels are not of concern as they have been shown to have little impact on the durability of high level waste glasses. The crystallization behavior of the surrogate glasses was generally the same as that of their U{sub 3}O{sub 8}-containing counterparts. There are two pairs that were exceptions: SB5-04 (amorphous) and SB5-24 (possible trevorite), along with SB5-07 (amorphous) and SB5-25 (trevorite). In these cases, the surrogate glasses (SB5-24 and SB5-25) appear to be more conservative (more prone to crystallization) than their U{sub 3}O{sub 8}-containing counterparts. Chemical durability was quantified using the Product Consistency Test (PCT). The normalized leachate (NL) values for B, Li, Na and Si for all of the study glasses were well below those of the Environmental Assessment (EA) benchmark glass, regardless of heat treatment or compositional view. This indicates that all of the glasses had very acceptable durability performance. The highest NL [B] for the study glasses was 0.914 g/L (the quenched version of glass SB5-13), normalized using the measured, bias-correct composition. There was little practical impact of the CCC heat treatment on the PCT responses of the study glasses. The measured PCT responses were predictable by the current {Delta}G{sub p} models. In general, the PCT responses for the surrogate glasses or the glasses without U{sub 3}O{sub 8} were quite similar to their U{sub 3}O{sub 8}-containing counterparts. The average percent error in NL [B] normalized by the measured, bias-corrected compositions for the surrogate glasses compared with their radioactive counterparts was 8.8%. The largest difference in NL

Fox, K; Tommy Edwards; David Best; Irene Reamer; Phyllis Workman

2008-08-28T23:59:59.000Z

64

Concentrating Solar Power Forum Concentrating Photovoltaics (Presentation)  

DOE Green Energy (OSTI)

This presentation's summaries: a convenient truth, comparison of three concentrator technologies, value of high efficiency, and status of industry.

Kurtz, S.

2008-05-06T23:59:59.000Z

65

Concentrating Photovoltaics (Presentation)  

SciTech Connect

Solar is growing rapidly, and the concentrating photovoltaics industry-both high- and low-concentration cell approaches-may be ready to ramp production in 2009.

Kurtz, S.

2009-01-20T23:59:59.000Z

66

Lessons learned from a review of post-accident sampling systems, high range effluent monitors and high concentration particulate iodine samplers  

Science Conference Proceedings (OSTI)

Post-accident sampling systems (PASS), high range gaseous effluent monitors and sampling systems for particulates and iodine in high concentrations have been reviewed at twenty-one licensee sites in Region I of the US Nuclear Regulatory Commission which includes fifteen BWR's and fourteen PWR's. Although most of the installed PASS met the criteria, the highest operational readiness was found in on-line systems that were also used for routine sampling and analysis. The detectors used in the gaseous effluent monitors included external ion chambers, GM tubes, organic scintillators and Cd-Te solid state crystals. Although all were found acceptable, each had its own inherent limitations in the conversion of detector output to the time varying concentration of a post-accident mixture of noble gases. None of the installed particulate and iodine samplers fully met all of the criteria. Their principal limitations included a lack of documentation showing that they could obtain a representative sample and that many of them would collect of an excessive amount of activity at the design criteria. 10 refs., 4 figs., 5 tabs.

Hull, A.P.; Knox, W.H.; White, J.R.

1987-01-01T23:59:59.000Z

67

Determining the Susceptibility of Cloud Albedo to Changes in Droplet Concentration with the Advanced Very High Resolution Radiometer  

Science Conference Proceedings (OSTI)

Combustion Processes that Produce greenhouse gases also increase cloud condensation nuclei (CCN) concentrations, which in turn increase cloud droplet concentrations and thereby cloud albedo. A calculation of cloud susceptibility, defined in this ...

S. Platnick; S. Twomey

1994-03-01T23:59:59.000Z

68

Concentrating Photovoltaics  

Science Conference Proceedings (OSTI)

Concentrating photovoltaics (CPV) are a promising alternative to flat-plate photovoltaics in high direct normal irradiance (DNI) environments. The technology’s basic operating characteristics offer significant upside compared with other solar technologies: higher system efficiencies of upwards of 30%+; higher capacity factors, generated through two-axis tracking, exceeding 30% in ideal locations; lower cellular degradation from heat compared to flat-plate PV; lower water requirements; and reduced footpri...

2010-11-19T23:59:59.000Z

69

Concentrating Solar Power Forum Concentrating Photovoltaics (Presentation)  

SciTech Connect

This presentation's summaries: a convenient truth, comparison of three concentrator technologies, value of high efficiency, and status of industry.

Kurtz, S.

2008-05-06T23:59:59.000Z

70

Ultra-low resistance ohmic contacts to GaN with high Si doping concentrations grown by molecular beam epitaxy  

Science Conference Proceedings (OSTI)

Ti/Al/Ni/Au ohmic contacts were formed on heavily doped n{sup +} metal-polar GaN samples with various Si doping concentrations grown by molecular beam epitaxy. The contact resistivity (R{sub C}) and sheet resistance (R{sub sh}) as a function of corresponding GaN free carrier concentration (n) were measured. Very low R{sub C} values (electron mobility transistors.

Afroz Faria, Faiza; Guo Jia; Zhao Pei; Li Guowang; Kumar Kandaswamy, Prem; Wistey, Mark; Xing Huili; Jena, Debdeep [Department of Electrical Engineering, University of Notre Dame, Indiana 46556 (United States)

2012-07-16T23:59:59.000Z

71

Effect of low and high storage temperatures on head space gas concentrations and physical properties of wood pellets  

SciTech Connect

Headspace gas concentrations and wood pellet properties were studied in sealed glass canisters at 5–40 degrees C storage temperatures. CO2 and CO concentrations at 5, 10, 20 and 40 degrees C at the end of 23–28 days of storage were 1600 and 200, 4700 and 1200, and 31 200 and 15 800 parts per million by volume (ppmv) respectively. Corresponding O2 concentration was about 19•49, 19•20, 18•0 and 2•07% respectively. Non-linear regression equations adequately described the gas concentrations in the storage container as a function of time. Safe level estimation functions developed were linear for O2 and logarithmic for CO and CO2 concentrations. Measured pellet properties moisture, length, diameter, unit, bulk and tapped density, durability, calorific value, ash content and per cent fines were in the range of 4•6–5•02%, 14–15 mm, 6•4–6•5 mm, 1125–1175 kg m-3, 750–770 kg m-3, 825–840 kg m-3, 73–74%, 18•32–18•78 MJ kg-1, 0•65–0•74% and 0•13–0•15%. Durability values of pellets decreased by 13% at 40 degrees C storage temperature and other properties changed marginally.

Jaya Shankar Tumuluru; Shahab Sokhansanj; C. Jim Lim; Tony Bi; Xingya Kuang; Staffan Melin

2013-11-01T23:59:59.000Z

72

High concentration two-stage optics for parabolic trough solar collectors with tubular absorber and large rim angle  

SciTech Connect

A new two-stage optical design is proposed for parabolic trough solar collectors with tubular absorbers. It can boost the concentration ratio by a factor of 2.5 relative to the conventional design, while maintaining the large rim angles (i.e., low nominal f-numbers) that are desirable for practical and economical reasons. The second state involves asymmetric nonimaging concentrators of the CPC type, facing segments of the parabolic first stage. The second stage can be accommodated inside an evacuated receiver, allowing the use of first-surface silvered reflectors. The low heat loss of this design opens the possibility of producing steam at temperatures and pressures of conventional power plants, using only one-axis tracking. The improvement in conversion efficiency would be substantial.

Collares-Pereira, M. (Centro para a Conservacao de Energia, Amadora (Portugal)); Gordon, J.M. (Ben Gurion Univ. of the Negev, Beersheva (Israel)); Rabl, A. (Centre d'Energetique, Paris (France)); Winston, R. (Univ. of Chicago, IL (United States))

1991-01-01T23:59:59.000Z

73

HIGH-TEMPERATURE REACTIONS OF TYPE 304 STAINLESS STEEL IN LOW CONCENTRATIONS OF CARBON DIOXIDE AND CARBON MONOXIDE  

SciTech Connect

Compatibility studies of type 304 stainless steel in helium containing low concentrations of CO and CO/sub 2/ were conducted. The oxidation rates were insensitive to impurity concentrations between 0.0006--0.3 vol% in the temperature range 400--1000 deg C when P/sub co2/P/sub co/ was less than 0.66. Ratios above this value resulted initially in a slow oxidation rate, but was followed by an accelerated attack. The incubation period for the break-away varied with the P/sub co2//P/sub co/ ratio and the pressure of the two gases. The oxidation reactions proceeded through a selective depletion of chromium from the alloy which increased the carbon solubility and depletion of nickel which led to the transformation of austenite to ferrite. Parabolic reaction rates were observed for the formation of the protective oxides. Arrhenius plots of rate constants versus 1/T indicated the presence of several oxides which was confirmed by other methods. Carburization or decarburization reactions occurred coincidentally with oxidation and depended upon temperature and (P/sub CO/)/sup 2/ /P/sub CO2/ and the P/sub co2//P /sub CO/. Neither was detected below 600 deg C. Between 600--900 deg C, only carburization occurred and appeared to be mainly dependent on the temperature. Above 900 deg C, both carburization and decarburization occurred depending upon the (P/sub co/)/sup 2//P/sub co2/ and the P/sub co2//P/sub co/. The interactions of the oxidizing and carburization reactions resulted in carbon maxima at a (P/sub co/)/sup 2//P/sub co2/ ratio of 0.227. The results indicate that it may be impractical or unnecessary to reduce impurity gases to levels which do not cause surface reactions. It is concluded that undesirable oxidation and carburization reactions can be eliminated by controlling the ratios of the impurity gases. (auth)

Inouye, H.

1962-08-29T23:59:59.000Z

74

Method of particle trajectory recognition in particle flows of high particle concentration using a candidate trajectory tree process with variable search areas  

DOE Patents (OSTI)

The application relates to particle trajectory recognition from a Centroid Population comprised of Centroids having an (x, y, t) or (x, y, f) coordinate. The method is applicable to visualization and measurement of particle flow fields of high particle. In one embodiment, the centroids are generated from particle images recorded on camera frames. The application encompasses digital computer systems and distribution mediums implementing the method disclosed and is particularly applicable to recognizing trajectories of particles in particle flows of high particle concentration. The method accomplishes trajectory recognition by forming Candidate Trajectory Trees and repeated searches at varying Search Velocities, such that initial search areas are set to a minimum size in order to recognize only the slowest, least accelerating particles which produce higher local concentrations. When a trajectory is recognized, the centroids in that trajectory are removed from consideration in future searches.

Shaffer, Franklin D.

2013-03-12T23:59:59.000Z

75

Manufacturing of High-Efficiency Bi-Facial Tandem Concentrator Solar Cells: February 20, 2009--August 20, 2010  

DOE Green Energy (OSTI)

Spire Semiconductor made concentrator photovoltaic (CPV) cells using a new bi-facial growth process and met both main program goals: a) 42.5% efficiency 500X (AM1.5D, 25C, 100mW/cm2); and b) Ready to supply at least 3MW/year of such cells at end of program. We explored a unique simple fabrication process to make a N/P 3-junction InGaP/GaAs/InGaAs tandem cells . First, the InGaAs bottom cell is grown on the back of a GaAs wafer. The wafers are then loaded into a cassette, spin-rinsed to remove particles, dipped in dilute NH4OH and spin-dried. The wafers are then removed from the cassette loaded the reactor for GaAs middle and InGaP top cell growth on the opposite wafer face (bi-facial growth). By making the epitaxial growth process a bit more complex, we are able to avoid more complex processing (such as large area wafer bonding or epitaxial liftoff) used in the inverted metamorphic (IMM) approach to make similar tandem stacks. We believe the yield is improved compared to an IMM process. After bi-facial epigrowth, standard III-V cell steps (back metal, photolithography for front grid, cap etch, AR coat, dice) are used in the remainder of the process.

Wojtczuk , S.

2011-06-01T23:59:59.000Z

76

Photooxidation of Alpha-Pinene at High Relative Humidity in the Presence of Increasing Concentrations of NOx  

DOE Green Energy (OSTI)

The photooxidation of ~1 ppm alpha-pinene in the presence of increasing concentrations of NO2 was studied in a Teflon chamber at relative humidities from 70 - 88% and temperatures from 296 - 304 K. The loss of alpha-pinene and formation of gas phase products were followed using proton transfer reaction mass spectrometry (PTR-MS). Gas phase reaction products measured by PTR-MS and their yields include formaldehyde (5 + 1%), formic acid (2.5 + 1.4%), methanol (0.6 + 0.3%), acetaldehyde (3.9 + 1.7%), acetic acid (10 + 2%), acetone (11.5 + 3.1%), pinonaldehyde (22 + 6%), and pinene oxide (0.9 + 0.1%). There was evidence of organic nitrates in the gas phase and small peaks were tentatively assigned to norpinonaldehyde, 4-oxopinonaldehyde, propanedial, 2,3-dioxobutanal and 3,5,6-trioxoheptanal or 3-hydroxymethyl-2,2-dimethylcyclobutylethanone. The formation and growth of new particles were followed using a scanning mobility particle sizer (SMPS), and their chemical composition was probed using single particle mass spectrometry (SPLAT II). SPLAT II analysis also provided measurements of the vacuum aerodynamic diameters of the newly formed secondary organic aerosol (SOA) particles and, in combination with the electrical mobility diameter, a particle density of 1.21 + 0.02 g cm-3 was calculated, 20% larger than often assumed in calculating SOA yields. SPLAT II showed that the suspended SOA consisted of a complex mixture of organic nitrates and organics, possibly including pinonic acid, pinic acid and trans-sobrerol. Three-wavelength light scattering measurements made using an integrating nephelometer were consistent with particles having a refractive index characteristic of organic compounds, but the data could not be well matched at all three wavelengths with a single refractive index. The effect of addition of cyclohexane or NO on particle formation showed that ozonolysis was the major mechanism of SOA formation in this system. However, unlike simple ozonolysis, organic nitrates are formed in both the gas and particle phases. Identifying and measuring specific organic nitrates in both the gas and particle phases in air may help to elucidate why SOA formation has been reported in field studies to be associated with polluted urban areas, yet the carbon in these particles is largely contemporary, i.e., non-fossil fuel carbon.

Yu, Yong; Ezell, Michael J.; Zelenyuk, Alla; Imre, Dan G.; Alexander, M. Lizabeth; Ortega, John V.; D'Anna, Barbara; Harmon, Chris W.; Johnson, Stan; Finlayson-Pitts, Barbara J.

2008-06-01T23:59:59.000Z

77

OPERATIONAL LIMITATIONS FOR DEMOLITION OF A HIGHLY ALPHA CONTAMINATED BUILDING MODLES VERSUS MEASURED AIR & SURFACE ACTIVITY CONCENTRATIONS  

SciTech Connect

The demolition of a facility historically used for processing and handling transuranic materials is considered. Residual alpha emitting radionuclide contamination poses an exposure hazard if released to the local environment during the demolition. The process of planning for the demolition of this highly alpha contaminated building, 232-Z, included a predemolition modeling analysis of potential exposures. Estimated emission rates were used as input to an air dispersion model to estimate frequencies of occurrence of peak air and surface exposures. Postdemolition modeling was also conducted, based on the actual demolition schedule and conditions. The modeling results indicated that downwind deposition is the main operational limitation for demolition of a highly alpha-contaminated building. During the demolition of 232-Z, airborne radiation and surface contamination were monitored. The resultant non-detect monitoring results indicate a significant level of conservatism in the modeled results. This comparison supports the use of more realistic assumption in the estimating emission rates. The resultant reduction in modeled levels of potential exposures has significant implications in terms of the projected costs of demolition of such structures.

LLOYD, E.R.

2006-11-02T23:59:59.000Z

78

Growth of high Bi concentration GaAs{sub 1-x}Bi{sub x} by molecular beam epitaxy  

Science Conference Proceedings (OSTI)

The incorporation of Bi is investigated in the molecular beam epitaxy growth of GaAs{sub 1-x}Bi{sub x}. Bi content increases rapidly as the As{sub 2}:Ga flux ratio is lowered to 0.5 and then saturates for lower flux ratios. Growth under Ga and Bi rich conditions shows that Bi content increases strongly with decreasing temperature. A model is proposed where Bi from a wetting layer incorporates through attachment to Ga-terminated surface sites. The weak Ga-Bi bond can be broken thermally, ejecting Bi back into the wetting layer. Highly crystalline films with up to 22% Bi were grown at temperatures as low as 200 Degree-Sign C.

Lewis, R. B. [Department of Physics and Astronomy, University of British Columbia, V6T 1Z1 Vancouver (Canada); Department of Electrical and Computer Engineering, University of Victoria, V8W 3P6 Victoria (Canada); Masnadi-Shirazi, M. [Department of Electrical and Computer Engineering, University of Victoria, V8W 3P6 Victoria (Canada); Department of Electrical and Computer Engineering, University of British Columbia, V6T 1Z4 Vancouver (Canada); Tiedje, T. [Department of Electrical and Computer Engineering, University of Victoria, V8W 3P6 Victoria (Canada)

2012-08-20T23:59:59.000Z

79

High Hydrogen Concentrations Detected In The Underground Vaults For RH-TRU Waste At INEEL Compared With Calculated Values Using The INEEL-Developed Computer Code  

DOE Green Energy (OSTI)

About 700 remote-handled transuranic (RH-TRU) waste drums are stored in about 144 underground vaults at the Intermediate-Level Transuranic Storage Facility at the Idaho National Environmental and Engineering Laboratory’s (INEEL’s) Radioactive Waste Management Complex (RWMC). These drums were shipped to the INEEL from 1976 through 1996. During recent monitoring, concentrations of hydrogen were found to be in excess of lower explosive limits. The hydrogen concentration in one vault was detected to be as high as 18% (by volume). This condition required evaluation of the safety basis for the facility. The INEEL has developed a computer program to estimate the hydrogen gas generation as a function of time and diffusion through a series of layers (volumes), with a maximum five layers plus a sink/environment. The program solves the first-order diffusion equations as a function of time. The current version of the code is more flexible in terms of user input. The program allows the user to estimate hydrogen concentrations in the different layers of a configuration and then change the configuration after a given time; e.g.; installation of a filter on an unvented drum or placed in a vault or in a shipping cask. The code has been used to predict vault concentrations and to identify potential problems during retrieval and aboveground storage. The code has generally predicted higher hydrogen concentrations than the measured values, particularly for the drums older than 20 year, which could be due to uncertainty and conservative assumptions in drum age, heat generation rate, hydrogen generation rate, Geff, and diffusion rates through the layers.

Rajiv Bhatt; Soli Khericha

2005-02-01T23:59:59.000Z

80

Vapor pressure measurements on non-aqueous electrolyte solutions. Part 2. Tetraalkylammonium salts in methanol. Activity coefficients of various 1-1 electrolytes at high concentrations  

SciTech Connect

Precise vapor pressure data for solutions of Et/sub 4/NBr, Bu/sub 4/NBr, Bu/sub 4/Nl, Bu/sub 4/NClO/sub 4/, and Am/sub 4/NBr in methanol at 25/sup 0/C in the concentration range 0.04 < m(mol-(kg of solvent)/sup -1/) < 1.6 are communicated and discussed. Polynomials in molalities are given which may be used for calculating precise vapor pressure depressions of these solutions. Osmotic coefficients are calculated by taking into account the second virial coefficient of methanol vapor. Discussion of the data at low concentrations is based on the chemical model of electrolyte solutions taking into account non-coulombic interactions; ion-pair association constants are compared to those of conductance measurements. Pitzer equations are used to reproduce osmotic and activity coefficient at high concentrations; the set of Pitzer parameters b = 3.2, ..cap alpha../sub 1/ = 2.0 and ..cap alpha../sub 2/ = 20.0 is proposed for methanol solutions.

Barthel, J.; Lauermann, G.; Neueder, R.

1986-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Shock initiation and detonation study on high concentration H2O2/H2O solutions using in-situ magnetic gauges  

SciTech Connect

Concentrated hydrogen peroxide (H{sub 2}O{sub 2}) has been known to detonate for many years. However, because of its reactivity and the difficulty in handling and confining it, along with the large critical diameter, few studies providing basic information about the initiation and detonation properties have been published. We are conducting a study to understand and quantify the initiation and detonation properties of highly concentrated H{sub 2}O{sub 2} using a gas-driven two-stage gun to produce well defined shock inputs. Multiple magnetic gauges are used to make in-situ measurements of the growth of reaction and subsequent detonation in the liquid. These experiments are designed to be one-dimensional to eliminate any difficulties that might be encountered with large critical diameters. Because of the concern of the reactivity of the H{sub 2}O{sub 2} with the confining materials, a remote loading system has been developed. The gun is pressurized, then the cell is filled and the experiment shot within less than three minutes. Several experiments have been completed on {approx}98 wt % H{sub 2}O{sub 2}/H{sub 2}O mixtures; homogeneous shock initiation behavior has been observed in the experiments where reaction is observed. The initial shock pressurizes and heats the mixture. After an induction time, a thermal explosion type reaction produces an evolving reactive wave that strengthens and eventually overdrives the first wave producing a detonation. From these experiments, we have determined unreacted Hugoniot points, times-to-detonation points that indicate low sensitivity (an input of 13.5 GPa produces detonation in 1 {micro}s compared to 9.5 GPa for neat nitromethane), and detonation velocities of high concentration H{sub 2}O{sub 2}/H{sub 2}O solutions of over 6.6 km/s.

Sheffield, Stephen A [Los Alamos National Laboratory; Dattelbaum, Dana M [Los Alamos National Laboratory; Stahl, David B [Los Alamos National Laboratory; Gibson, L Lee [Los Alamos National Laboratory; Bartram, Brian D [Los Alamos National Laboratory; Engelke, Ray [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

82

Soret Effect Study on High-Pressure CO2-Water Solutions Using UV-Raman Spectroscopy and a Concentric-Tube Optical Cell  

Science Conference Proceedings (OSTI)

Spatially resolved deep-UV Raman spectroscopy was applied to solutions of CO2 and H2O (or D2O), which were subject to a temperature gradient in a thermally regulated high-pressure concentric-tube Raman cell in an attempt to measure a Soret effect in the vicinity of the critical point of CO2. Although Raman spectra of solutions of CO2 dissolved in D2O at 10 MPa and temperatures near the critical point of CO2 had adequate signal-to-noise and spatial resolution to observe a Soret effect with a Soret coefficient with magnitude of |ST| > 0.03, no evidence for an effect of this size was obtained for applied temperature gradients up to 19oC. The presence of 1 M NaCl did not make a difference. In contrast, the concentration of CO2 dissolved in H2O was shown to vary significantly across the temperature gradient when excess CO2 was present, but the results could be explained simply by the variation in CO2 solubility over the temperature range and not to kinetic factors. For mixtures of D2O dissolved in scCO2 at 10 MPa and temperatures close to the critical point of CO2, the Raman peaks for H2O were too weak to measure with confidence even at the limit of D2O solubility.

Windisch, Charles F.; McGrail, B. Peter; Maupin, Gary D.

2012-01-01T23:59:59.000Z

83

Divacancy-hydrogen complexes in dislocation-free high-purity germanium. [Annealing, Hall effect, steady-state concentration energy dependence  

DOE Green Energy (OSTI)

A defect center with a single acceptor level at E/sub v/ + 0.08 eV appears in H/sub 2/-grown dislocation-free high-purity germanium. Its concentration changes reversibly upon annealing up to 650 K. By means of Hall-effect and conductivity measurements over a large temperature range the temperature dependence of the steady-state concentration between 450 and 720 K as well as the transients following changes in temperature were determined. The observed acceptor level is attributed to the divacancy-hydrogen complex V/sub 2/H. The complex reacts with hydrogen, dissolved in the Ge lattice or stored in traps, according to V/sub 2/H + H reversible V/sub 2/H/sub 2/. An energy level associated with the divacancy-dihydrogen complex was not observed. These results are in good agreement with the idea that hydrogen in germanium forms a ''very deep donor'' (i.e., the energy level lies inside the valence band).

Haller, E.E.; Hubbard, G.S.; Hansen, W.L.; Seeger, A.

1976-09-01T23:59:59.000Z

84

Use of a cryogenic sampler to measure radioactive gas concentrations in the main off-gas system at a high-flux isotope reactor  

Science Conference Proceedings (OSTI)

A method for measuring gamma-emitting radioactive gases in air has been developed at Oak Ridge National Laboratory (ORNL). This method combines a cryogenic air-sample collector with a high-purity germanium (HPGe) gamma spectroscopy system. This methodology was developed to overcome the inherently difficult collection and detection of radioactive noble gases. The cryogenic air-sampling system and associated HPGe detector has been used to measure the concentration of radioactive gases in the primary coolant main off-gas system at ONRL's High-Flux Isotope Reactor (HFIR). This paper provides: (1) a description of the cryogenic sampler, the radionuclide detection technique, and a discussion of the effectiveness of sampling and detection of gamma-emitting noble gases; (2) a brief description of HFIR and its associated closed high off-gas system; and (3) quantification of gamma-emitting gases present in the off-gas of the HFIR primary core coolant (e.g. radioisotopes of argon, xenon, and krypton).

Berven, B.A.; Perdue, P.T.; Kark, J.B.; Gibson, M.O.

1982-01-01T23:59:59.000Z

85

100-NR-2 Apatite Treatability Test: High-Concentration Calcium-Citrate-Phosphate Solution Injection for In Situ Strontium-90 Immobilization  

SciTech Connect

Following an evaluation of potential strontium-90 (90Sr) treatment technologies and their applicability under 100-NR-2 hydrogeologic conditions, the U.S. Department of Energy (DOE), Fluor Hanford, Inc. (now CH2M Hill Plateau Remediation Company [CHPRC]), Pacific Northwest National Laboratory, and the Washington State Department of Ecology agreed that the long-term strategy for groundwater remediation at the 100-N Area should include apatite as the primary treatment technology. This agreement was based on results from an evaluation of remedial alternatives that identified the apatite permeable reactive barrier (PRB) technology as the approach showing the greatest promise for reducing 90Sr flux to the Columbia River at a reasonable cost. This letter report documents work completed to date on development of a high-concentration amendment formulation and initial field-scale testing of this amendment solution.

Vermeul, Vincent R.; Fritz, Brad G.; Fruchter, Jonathan S.; Szecsody, James E.; Williams, Mark D.

2010-09-01T23:59:59.000Z

86

Photovoltaic concentrator initiative: Concentrator cell development  

DOE Green Energy (OSTI)

This project involves the development of a large-area, low-cost, high-efficiency concentrator solar cell for use in the Entech 22-sun linear-focus Fresnel lens concentrator system. The buried contact solar cell developed at the University of New South Wales was selected for this project. Both Entech and the University of New South Wales are subcontractors. This annual report presents the program efforts from November 1990 through December 1991, including the design of the cell, development of a baseline cell process, and presentation of the results of preliminary cell processing. Important results include a cell designed for operation in a real concentrator system and substitution of mechanical grooving for the previously utilized laser scribing.

Wohlgemuth, J.H.; Narayanan, S. [Solarex Corp., Frederick, MD (US)

1993-05-01T23:59:59.000Z

87

Process for concentrated biomass saccharification  

DOE Patents (OSTI)

Processes for saccharification of pretreated biomass to obtain high concentrations of fermentable sugars are provided. Specifically, a process was developed that uses a fed batch approach with particle size reduction to provide a high dry weight of biomass content enzymatic saccharification reaction, which produces a high sugars concentration hydrolysate, using a low cost reactor system.

Hennessey, Susan M. (Avondale, PA); Seapan, Mayis (Landenberg, PA); Elander, Richard T. (Evergreen, CO); Tucker, Melvin P. (Lakewood, CO)

2010-10-05T23:59:59.000Z

88

Concentrator silicon cell research  

Science Conference Proceedings (OSTI)

This project continued the developments of high-efficiency silicon concentrator solar cells with the goal of achieving a cell efficiency in the 26 to 27 percent range at a concentration level of 150 suns of greater. The target efficiency was achieved with the new PERL (passivated emitter, rear locally diffused) cell structure, but only at low concentration levels around 20 suns. The PERL structure combines oxide passivation of both top and rear surfaces of the cells with small area contact to heavily doped regions on the top and rear surfaces. Efficiency in the 22 to 23 percent range was also demonstrated for large-area concentrator cells fabricated with the buried contact solar cell processing sequence, either when combined with prismatic covers or with other innovative approaches to reduce top contact shadowing. 19 refs.

Green, M.A.; Wenham, S.R.; Zhang, F.; Zhao, J.; Wang, A. [New South Wales Univ., Kensington (Australia). Solar Photovoltaic Lab.

1992-04-01T23:59:59.000Z

89

An evaluation of membrane materials for the treatment of highly concentrated suspended salt solutions in reverse osmosis and nanofiltration processes for desalination  

E-Print Network (OSTI)

This thesis presents a study to enhance and improve a zero liquid discharge (ZLD) reverse osmosis process that uses seed crystals to promote crystallization of the dissolved salts in the residual brine while it is being treated by identifying those membrane materials that are most suitable for the process. In the study, a one plate SEPA Cell module by GE Osmonics was used to determine which membranes were most susceptible to fouling and/or membrane hydrolysis. A cellulose acetate (CA), polyamide (PA) low MWCO, and PA high MWCO membrane were tested under reverse osmosis conditions. The CA and thin film (TF) membranes were also tested for nanofiltration. The cell was operated under conditions that were determined to be optimum for each membrane by the manufacturer, GE Osmonics. A high pressure, low flow, positive displacement diaphragm pump circulated the saturated calcium sulfate solution with 2 % suspended solids through the cell while the reject and permeate were recycled back to the feed, thereby preserving a saturated solution to promote crystal growth and simulate the seeded reverse osmosis process. The temperature was maintained constant by adding an ice pack to the feed vessel when necessary. The transmembrane pressure differential was maintained constant by adjusting a back pressure valve on the concentrate outlet. The results illustrate that if potable drinking water is the intended use, then the nanofiltration cellulose acetate membrane should be used. If irrigation is the desired use, then the nanofiltration thin film membrane should be used. Overall, the reverse osmosis cellulose acetate membrane was observed to outperform all membranes when all performance parameters were normalized. However, this membrane was observed to be prone to degradation in a seeded slurry and therefore its lifetime should be analyzed further. The polyamide membrane initially had a high water transport coefficient, but fouling led to its rapid decline which was attributed to the membrane’s rough and protrusive surface. A lifetime test on the thin film and cellulose acetate revealed that when operated at their maximum pressure specified by GE Osmonics for a duration of 8 hours that no decrease in rejection occurred.

Hughes, Trenton Whiting

2006-12-01T23:59:59.000Z

90

Vapor concentration monitor  

DOE Patents (OSTI)

An apparatus for monitoring the concentration of a vapor, such as heavy water, having at least one narrow bandwidth in its absorption spectrum, in a sample gas such as air. The air is drawn into a chamber in which the vapor content is measured by means of its radiation absorption spectrum. High sensitivity is obtained by modulating the wavelength at a relatively high frequency without changing its optical path, while high stability against zero drift is obtained by the low frequency interchange of the sample gas to be monitored and of a reference sample. The variable HDO background due to natural humidity is automatically corrected.

Bayly, John G. (Deep River, CA); Booth, Ronald J. (Deep River, CA)

1977-01-01T23:59:59.000Z

91

Energy Basics: Linear Concentrator Systems for Concentrating...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Concentrating Solar Power Linear...

92

Final project report - CRADA with United Solar Technologies and Pacific Northwest Laboratory (PNL-021): Thin film materials for low-cost high performance solar concentrators  

DOE Green Energy (OSTI)

The objectives of this project were as follows: To develop and evaluate promising low-cost dielectric and polymer-protected thin-film reflective metal coatings to be applied to preformed continuously-curved solar reflector panels to enhance their solar reflectance, and to demonstrate protected solar reflective coatings on preformed solar concentrator panels. The opportunity for this project arose from a search by United Solar Technologies (UST) for organizations and facilities capable of applying reflective coatings to large preformed panels. PNL was identified as being uniquely qualified to participate in this collaborative project.

Martin, P.M.; Affinito, J.D.; Gross, M.E.; Bennett, W.D.

1995-03-01T23:59:59.000Z

93

New GaInP/GaAs/GaInAs, Triple-Bandgap, Tandem Solar Cell for High-Efficiency Terrestrial Concentrator Systems  

DOE Green Energy (OSTI)

GaInP/GaAs/GaInAs three-junction cells are grown in an inverted configuration on GaAs, allowing high quality growth of the lattice matched GaInP and GaAs layers before a grade is used for the 1-eV GaInAs layer. Using this approach an efficiency of 37.9% was demonstrated.

Kurtz, S.; Wanlass, M.; Kramer, C.; Young, M.; Geisz, J.; Ward, S.; Duda, A.; Moriarty, T.; Carapella, J.; Ahrenkiel, P.; Emery. K.; Jones, K.; Romero, M.; Kibbler, A.; Olson, J.; Friedman, D.; McMahon, W.; Ptak, A.

2005-11-01T23:59:59.000Z

94

Linear Concentrator Systems for Concentrating Solar Power  

Energy.gov (U.S. Department of Energy (DOE))

Linear concentrating solar power (CSP) collectors capture the sun's energy with large mirrors that reflect and focus the sunlight onto a linear receiver tube. The receiver contains a fluid that is...

95

Lifshits quantum phase transitions and rearrangement of the Fermi surface upon a change in the hole concentration in high-temperature superconductors  

SciTech Connect

Changes in the electronic structure in the normal phase of high-T{sub c} superconductors (HTSCs), viz., layered cuprates, are considered. The results of LDA + GTB calculations of the electron structure and the Fermi surface of La{sub 2-x}Sr{sub x}CuO{sub 4} one-layer cuprates with allowance for strong correlations are compared with ARPES and quantum oscillations data. Two critical points x{sub c1} and x{sub c2} are discovered at which the rear-rangement of the Fermi surface takes place. In the vicinity of these points, changes in the thermodynamic properties at low temperatures are determined using the Lifshits ideology concerning 2.5-order quantum phase transitions. A singularity {delta}(C/T) {proportional_to} (x - x{sub e}){sup 1/2} in the electron heat capacity agrees well with the available experimental data in the vicinity of x{sub c1} {approx} 0.15. Sign reversal of the Hall constant upon doping is also considered qualitatively.

Ovchinnikov, S. G., E-mail: sgo@iph.krasn.ru; Korshunov, M. M.; Shneyder, E. I. [Russian Academy of Sciences, Kirenskii Institute of Physics, Siberian Branch (Russian Federation)

2009-11-15T23:59:59.000Z

96

Production of fullerenes using concentrated solar flux  

SciTech Connect

A method of producing soot containing high amounts of fullerenes comprising: providing a primary concentrator capable of impingement of a concentrated beam of sunlight onto a carbon source to cause vaporization of carbon and subsequent formation of fullerenes, or providing a solar furnace having a primary concentrator with a focal point that concentrates a solar beam of sunlight; providing a reflective secondary concentrator having an entrance aperture and an exit aperture at the focal point of the solar furnace; providing a carbon source at the exit aperture of the secondary concentrator; supplying an inert gas over the carbon source to keep the secondary concentrator free from vaporized carbon; and impinging a concentrated beam of sunlight from the secondary concentrator on the carbon source to vaporize the carbon source into a soot containing high amounts of fullerenes.

Fields, Clark L. (Greeley, CO); Pitts, John Roland (Lakewood, CO); King, David E. (Lakewood, CO); Hale, Mary Jane (Golden, CO); Bingham, Carl E. (Denver, CO); Lewandowski, Allan A. (Evergreen, CO)

2000-01-01T23:59:59.000Z

97

Concentrating Solar Power  

Energy.gov (U.S. Department of Energy (DOE))

Concentrating solar power (CSP) technologies use mirrors to reflect and concentrate sunlight onto receivers that collect solar energy and convert it to heat. This thermal energy can then be used to...

98

Concentrator Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

Concentrator photovoltaic (PV) systems use less solar cell material than other PV systems. PV cells are the most expensive components of a PV system, on a per-area basis. A concentrator makes use...

99

Concentrating Solar Power  

DOE Green Energy (OSTI)

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its concentrating solar power subprogram.

Not Available

2008-09-01T23:59:59.000Z

100

A combined microfluidic/dielectrophoretic microorganism concentrator  

E-Print Network (OSTI)

This thesis presents the development of a high-throughput microfluidic microorganism concentrator for pathogen detection applications. Interdigitated electrodes lining the bottom of the channel use positive dielectrophoretic ...

Gadish, Nitzan

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

NREL's Concentrated Solar Radiation User Facility  

DOE Green Energy (OSTI)

Declared a national user facility in 1993, NREL's Concentrated Solar Radiation User Facility (CSR) allows industry, government, and university researchers to examine the effects and applications of as much as 50,000 suns of concentrated solar radiation using a High-Flux Solar Furnace and long-term exposure using an ultraviolet (UV) concentrator.

Lewandowski, A.

1999-09-01T23:59:59.000Z

102

Concentration with uniform flux  

SciTech Connect

A modification of a parabolic cylinder concentrator is developed to procedure uniform flux. The controlling surface equation is given. A three-dimensional ray-trace technique is used to obtain the shape of the image at the focal plane of a thin slice of the mirror. Also, the concentration distribution for uniform flux is given. 1 references, 7 figures.

Not Available

1986-01-01T23:59:59.000Z

103

Development of concentrator solar cells  

DOE Green Energy (OSTI)

A limited pilot production run on PESC silicon solar cells for use at high concentrations (200 to 400 suns) is summarized. The front contact design of the cells was modified for operation without prismatic covers. The original objective of the contract was to systematically complete a process consolidation phase, in which all the, process improvements developed during the contract would be combined in a pilot production run. This pilot run was going to provide, a basis for estimating cell costs when produced at high throughput. Because of DOE funding limitations, the Photovoltaic Concentrator Initiative is on hold, and Applied Solar`s contract was operated at a low level of effort for most of 1993. The results obtained from the reduced scope pilot run showed the effects of discontinuous process optimization and characterization. However, the run provided valuable insight into the technical areas that can be optimized to achieve the original goals of the contract.

Not Available

1994-08-01T23:59:59.000Z

104

Organic photovoltaics and concentrators  

E-Print Network (OSTI)

The separation of light harvesting and charge generation offers several advantages in the design of organic photovoltaics and organic solar concentrators for the ultimate end goal of achieving a lower cost solar electric ...

Mapel, Jonathan King

2008-01-01T23:59:59.000Z

105

Concentrator-quality evaluation  

DOE Green Energy (OSTI)

The performance of a reflecting solar concentrator depends, of course, on its surface reflectance, but there are other important factors. Among these are sun-tracking errors, surface-slope errors, and surface irregularities. It is appropriate to use statistics to describe and analyze these non-deterministic factors. A scheme for specifying the quality of a solar concentrator that includes all these effects is described and illustrated. It is believed that this procedure is optimum in the sense that it requires a minimum of measurements to obtain a complete enough description of a concentrator to determine its optical performance under any operating geometry. The specification scheme is, therefore, suitable for use in general systems analysis studies involving solar concentrators.

Biggs, F.; Vittitoe, C.N.

1978-01-01T23:59:59.000Z

106

Joined concentric tubes  

SciTech Connect

Tubular objects having two or more concentric layers that have different properties are joined to one another during their manufacture primarily by compressive and friction forces generated by shrinkage during sintering and possibly mechanical interlocking. It is not necessary for the concentric tubes to display adhesive-, chemical- or sinter-bonding to each other in order to achieve a strong bond. This facilitates joining of dissimilar materials, such as ceramics and metals.

DeJonghe, Lutgard; Jacobson, Craig; Tucker, Michael; Visco, Steven

2013-01-01T23:59:59.000Z

107

Concentrating solar power | Open Energy Information  

Open Energy Info (EERE)

Concentrating solar power Concentrating solar power (Redirected from Concentrating Solar Power) Jump to: navigation, search Concentrating Solar Power Basics (The following text is derived from NREL's concentrating solar power information page.)[1] Concentrating solar power (CSP) offers a utility-scale, firm, dispatchable renewable energy option that can help meet our nation's demand for electricity. CSP plants produce power by first using mirrors to focus sunlight to heat a working fluid. Ultimately, this high-temperature fluid is used to spin a turbine or power an engine that drives a generator. And the final product is electricity. Smaller CSP systems can be located directly where the power is needed. Larger, utility-scale CSP applications provide hundreds of megawatts of electricity for the power grid. Both linear concentrator and power tower

108

Concentrating solar power | Open Energy Information  

Open Energy Info (EERE)

Concentrating solar power Concentrating solar power (Redirected from - Concentrating Solar Power) Jump to: navigation, search Concentrating Solar Power Basics (The following text is derived from NREL's concentrating solar power information page.)[1] Concentrating solar power (CSP) offers a utility-scale, firm, dispatchable renewable energy option that can help meet our nation's demand for electricity. CSP plants produce power by first using mirrors to focus sunlight to heat a working fluid. Ultimately, this high-temperature fluid is used to spin a turbine or power an engine that drives a generator. And the final product is electricity. Smaller CSP systems can be located directly where the power is needed. Larger, utility-scale CSP applications provide hundreds of megawatts of electricity for the power grid. Both linear concentrator and power tower

109

Photovoltaic solar concentrator  

SciTech Connect

A photovoltaic solar concentrator is disclosed with one or more transverse-junction solar cells (also termed point contact solar cells) and a lens located above each solar cell to concentrate sunlight onto the solar cell to generate electricity. Piezoelectric actuators tilt or translate each lens to track the sun using a feedback-control circuit which senses the electricity generated by one or more of the solar cells. The piezoelectric actuators can be coupled through a displacement-multiplier linkage to provide an increased range of movement of each lens. Each lens in the solar concentrator can be supported on a frame (also termed a tilt plate) having three legs, with the movement of the legs being controlled by the piezoelectric actuators.

Nielson, Gregory N.; Okandan, Murat; Resnick, Paul J.; Cruz-Campa, Jose Luis

2012-12-11T23:59:59.000Z

110

ARM - Measurement - Aerosol concentration  

NLE Websites -- All DOE Office Websites (Extended Search)

concentration concentration ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Aerosol concentration A measure of the amount of aerosol particles (e.g. number, mass, volume) per unit volume of air. Categories Aerosols Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments AOS : Aerosol Observing System CSPHOT : Cimel Sunphotometer CPC : Condensation Particle Counter IAP : In-situ Aerosol Profiles (Cessna Aerosol Flights) TDMA : Tandem Differential Mobility Analyzer

111

Heat Pipe Performance Enhancement with Binary Mixture Fluids that Exhibit Strong Concentration Marangoni Effects  

E-Print Network (OSTI)

100 suns) and high (>100 suns) solar concentration levels [system. For the same 30 suns solar concentration, the heatat a predicted solar concentration of 162 suns. Solar cell

Armijo, Kenneth Miguel

2011-01-01T23:59:59.000Z

112

high  

Gasoline and Diesel Fuel Update (EIA)

0 0 Summary Our short-term outlook for a wide array of energy prices has been adjusted upward as international and domestic energy supply conditions have tightened. We think that crude oil prices are as likely as not to end the year $2 to $3 per barrel higher than our previous projections. Thus, we think that the probability of West Texas Intermediate costing an average of $30 per barrel or more at midwinter is about 50 percent. On their current track, heating oil prices are likely to be about 30 percent above year-ago levels in the fourth quarter. Prices for Q1 2001 seem more likely now to match or exceed the high level seen in Q1 2000. Tight oil markets this year and an inherent propensity for high gas utilization in incremental power supply have resulted in rising North American natural gas

113

A compound parabolic concentrator  

SciTech Connect

A compound parabolic concentrator (CPC) for solar energy applications is presented in this work. A prototype was built and its thermal performance was determined. Operating temperatures of the order of 150 /sup 0/C with a reasonable efficiency can be attained by means of a fixed CPC.

Manrique, J.A.

1984-05-01T23:59:59.000Z

114

Silicon concentrator solar cell research  

DOE Green Energy (OSTI)

This report describes work conducted between December 1990 and May 1992 continuing research on silicon concentrator solar cells. The objectives of the work were to improve the performance of high-efficiency cells upon p-type substrates, to investigate the ultraviolet stability of such cells, to develop concentrator cells based on n-type substrates, and to transfer technology to appropriate commercial environments. Key results include the identification of contact resistance between boron-defused areas and rear aluminum as the source of anomalously large series resistance in both p- and n-type cells. A major achievement of the present project was the successful transfer of cell technology to both Applied Solar Energy Corporation and Solarex Corporation.

Green, M.A.; Zhao, J.; Wang, A.; Dai, X.; Milne, A.; Cai, S.; Aberle, A.; Wenham, S.R. [Univ. of New South Wales, Kensington, NSW (AU). Centre for Photovoltaic Devices and Systems

1993-06-01T23:59:59.000Z

115

Cylindrical acoustic levitator/concentrator  

DOE Patents (OSTI)

A low-power, inexpensive acoustic apparatus for levitation and/or concentration of aerosols and small liquid/solid samples having particulates up to several millimeters in diameter in air or other fluids is described. It is constructed from a commercially available, hollow cylindrical piezoelectric crystal which has been modified to tune the resonance frequency of the breathing mode resonance of the crystal to that of the interior cavity of the cylinder. When the resonance frequency of the interior cylindrical cavity is matched to the breathing mode resonance of the cylindrical piezoelectric transducer, the acoustic efficiency for establishing a standing wave pattern in the cavity is high. The cylinder does not require accurate alignment of a resonant cavity. Water droplets having diameters greater than 1 mm have been levitated against the force of gravity using; less than 1 W of input electrical power. Concentration of aerosol particles in air is also demonstrated.

Kaduchak, Gregory (Los Alamos, NM); Sinha, Dipen N. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

116

high  

Gasoline and Diesel Fuel Update (EIA)

0 0 Highlights International Oil Markets Prices. We have raised our world oil price projection by about $2 per barrel for this month because of assumed greater compliance by OPEC to targeted cuts, especially for the second quarter of 2000 (Figure 1). The expected decline in world petroleum inventories continues (Figure 2), and, given the generally stiff resolve of OPEC members to maintain production cuts, any sign of a turnaround in stocks may be postponed until later this year than previously assumed (Q3 instead of Q2). Our current estimate for the average import cost this past January is now $25 per barrel, a nearly $15-per-barrel increase from January 1999. Crude oil prices are expected to remain at relatively high levels for the first half of 2000, but

117

Derived Concentration Technical Standard  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

196-2011 196-2011 April 2011 DOE STANDARD DERIVED CONCENTRATION TECHNICAL STANDARD U.S. Department of Energy AREA ENVR Washington, D.C. 20585 Not Measurement Sensitive This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.doe.gov/nuclearsafety/ns/techstds/standard/standard.html DOE-STD-1196-2011 ACKNOWLEDGEMENTS This Derived Concentration Technical Standard was a collaborative effort sponsored by the DOE Office of Environmental Policy and Assistance, with support from Department subject matter experts (SMEs) in the field of radiation protection. This standard, which complements DOE Order (O) 458.1, Radiation Protection of the Public and the Environment, was developed taking

118

Concentrating Solar Thermal Technology  

Science Conference Proceedings (OSTI)

After nearly 20 years of commercial dormancy, concentrating solar thermal (CST) power development and investment activity is heating up globally. Encouraged by volatile energy prices, carbon markets, and renewable-friendly policies, an increasing number of established companies, newcomers, utilities, and government agencies are planning to deploy CST systems to tap the technologies' improving conversion efficiencies and low-cost electricity production potential. This renewable energy technology perspecti...

2009-03-27T23:59:59.000Z

119

Photovoltaic concentrator module improvements study  

DOE Green Energy (OSTI)

This report presents results of a project to design and fabricate an improved photovoltaic concentrator module. Using previous work as a baseline, this study conducted analyses and testing to select major module components and design features. The lens parquet and concentrator solar cell were selected from the highest performing, available components. A single 185X point-focus module was fabricated by the project team and tested at Sandia. Major module characteristics include a 6 by 4 compression-molded acrylic lens parquet (0.737 m{sup 2} area), twenty-four 0.2 ohms-cm, FZ, p-Si solar cells (1.56 cm{sup 2} area) soldered to ceramic substrates and copper heat spreaders, and an aluminized steel housing with corrugated bottom. This project marked the first attempt to use prismatic covers on solar cells in a high-concentration, point-focus application. Cells with 15 percent metallization were obtained, but problems with the fabrication and placement of prismatic covers on these cells lead to the decision not to use covers in the prototype module. Cell assembly fabrication, module fabrication, and module optical design activities are presented here. Test results are also presented for bare cells, cell assemblies, and module. At operating conditions of 981 watts/m{sup 2} DNI and an estimated cell temperature of 65{degrees}C, the module demonstrated an efficiency of 13.9 percent prior to stressed environmental exposure. 12 refs., 56 figs., 7 tabs.

Levy, S.L.; Kerschen, K.A. (Black and Veatch, Kansas City, MO (United States)); Hutchison, G. (Solar Kinetics, Inc., Dallas, TX (United States)); Nowlan, M.J. (Spire Corp., Bedford, MA (United States))

1991-08-01T23:59:59.000Z

120

Experimental Measurements of Concentration Fluctuations and Scales in a Dispersing Plume in the Atmospheric Surface Layer Obtained Using a Very Fast Response Concentration Detector  

Science Conference Proceedings (OSTI)

High-frequency fluctuations of concentration in a plume dispersing in the atmospheric surface layer have been measured with high-resolution concentration detectors (approximately 270 Hz at the ?6-dB point) to extract various concentration ...

Eugene Yee; R. Chan; P. R. Kosteniuk; G. M. Chandler; C. A. Biltoft; J. F. Bowers

1994-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

METHOD OF ISOTOPE CONCENTRATION  

DOE Patents (OSTI)

A method of concentrating N/sup 15/ in a liquid is described. Gaseous nitric oxide and at least one liquid selected from the group consisting of the aqueous oxyacids and oxides of nitrogen, wherein the atomic ratio of oxygen to nitrogen is greater than unity, are brought into intimate contact to cause an enrichment of the liquid and a depletion of the gas in N/sup 15/. The liquid is, thereafter, reacted with sulfur dioxide to produce a gas contuining nitric oxide. The gas contuining nitric oxide is then continuously passed in countercurrent contact with the liquid to cause further enrichment of the liquid.

Taylor, T.I.; Spindel, W.

1960-02-01T23:59:59.000Z

122

Characterization of Photovoltaic Concentrators  

DOE Green Energy (OSTI)

This paper will describe the resources at the National Renewable Energy Laboratory (NREL) for performing characterization of photovoltaic (PV) materials designed for operation under concentrated light. NREL has the capability to measure devices ranging from very small, unencapsulated research cells to reasonably sized, environmentally protected modules. Data gathering and interpretation are also ongoing areas of revision and improvement. The main goal of the current research is to reduce the measurement uncertainty to the lowest practical value. At present, the state of the art is limited at a ?5% level in measuring efficiency accurately.

Kiehl, J.; Emery, E.

2005-01-01T23:59:59.000Z

123

Concentric Black Rings  

E-Print Network (OSTI)

We present new supersymmetric solutions of five-dimensional minimal supergravity that describe concentric black rings with an optional black hole at the common centre. Configurations of two black rings are found which have the same conserved charges as a single rotating black hole; these black rings can have a total horizon area less than, equal to, or greater than the black hole with the same charges. A numerical investigation of these particular black ring solutions suggests that they do not have closed timelike curves.

Jerome P. Gauntlett; Jan B. Gutowski

2004-08-02T23:59:59.000Z

124

Optical oxygen concentration monitor  

DOE Patents (OSTI)

A system for measuring and monitoring the concentration of oxygen uses as a light source an argon discharge lamp, which inherently emits light with a spectral line that is close to one of oxygen's A-band absorption lines. In a preferred embodiment, the argon line is split into sets of components of shorter and longer wavelengths by a magnetic field of approximately 2000 Gauss that is parallel to the light propagation from the lamp. The longer wavelength components are centered on an absorption line of oxygen and thus readily absorbed, and the shorter wavelength components are moved away from that line and minimally absorbed. A polarization modulator alternately selects the set of the longer wavelength, or upshifted, components or the set of the shorter wavelength, or downshifted, components and passes the selected set to an environment of interest. After transmission over a path through that environment, the transmitted optical flux of the argon line varies as a result of the differential absorption. The system then determines the concentration of oxygen in the environment based on the changes in the transmitted optical flux between the two sets of components. In alternative embodiments modulation is achieved by selectively reversing the polarity of the magnetic field or by selectively supplying the magnetic field to either the emitting plasma of the lamp or the environment of interest.

Kebabian, Paul (Acton, MA)

1997-01-01T23:59:59.000Z

125

Optical oxygen concentration monitor  

DOE Patents (OSTI)

A system for measuring and monitoring the concentration of oxygen uses as a light source an argon discharge lamp, which inherently emits light with a spectral line that is close to one of oxygen`s A-band absorption lines. In a preferred embodiment, the argon line is split into sets of components of shorter and longer wavelengths by a magnetic field of approximately 2,000 Gauss that is parallel to the light propagation from the lamp. The longer wavelength components are centered on an absorption line of oxygen and thus readily absorbed, and the shorter wavelength components are moved away from that line and minimally absorbed. A polarization modulator alternately selects the set of the longer wavelength, or upshifted, components or the set of the shorter wavelength, or downshifted, components and passes the selected set to an environment of interest. After transmission over a path through that environment, the transmitted optical flux of the argon line varies as a result of the differential absorption. The system then determines the concentration of oxygen in the environment based on the changes in the transmitted optical flux between the two sets of components. In alternative embodiments modulation is achieved by selectively reversing the polarity of the magnetic field or by selectively supplying the magnetic field to either the emitting plasma of the lamp or the environment of interest. 4 figs.

Kebabian, P.

1997-07-22T23:59:59.000Z

126

Universal solar concentrator panel  

SciTech Connect

This patent describes a solar concentrator device. It comprises: a solar energy receiver; and a flat solar energy reflector arranged to reflect solar energy to the receiver, the reflector including a substantially square-shaped frame limiting an inner space, individual flat reflective panels arranged in the space in a first group or rows extending in a first direction and a second group of rows extending in a second direction substantially transverse to the first direction and so that each of the panels is turnable about three mutually perpendicular axes, and means for mounting the panels so that they are turnable about the axes. The mounting means including first means which connect the panels in the rows extending in one of the directions so that the panels in each of the rows extending in the one direction are jointly turnable about a first one of the axes, second means for mounting each of the panels so that in each of the rows extending in the one direction each of the panels is turnable about a second one of the axes, and third means for mounting each panel in each of the rows extending in the one direction so that each of the panels is turnable about a third one of the axes. This patent also describes a solar concentrator device, wherein the receiver includes a box forming an inner chamber, a plurality of photovoltaic cells sealed with a clear plastic and accommodated in the chamber, and water filling the chamber and surrounding the photovoltaic cells.

Bagno, R.G.

1991-03-12T23:59:59.000Z

127

Mercury concentrations in Maine sport fishes  

Science Conference Proceedings (OSTI)

To assess mercury contamination of fish in Maine, fish were collected from 120 randomly selected lakes. The collection goal for each lake was five fish of the single most common sport fish species within the size range commonly harvested by anglers. Skinless, boneless fillets of fish from each lake were composited, homogenized, and analyzed for total mercury. The two most abundant species, brook trout Salvelinus fontinalis and smallmouth bass Micropterus dolomieu, were also analyzed individually. The composite fish analyses indicate high concentrations of mercury, particularly in large and long-lived nonsalmonid species. Chain pickerel Esox niger, smallmouth bass, largemouth bass Micropterus salmoides, and white perch Morone americana had the highest average mercury concentrations, and brook trout and yellow perch Perca flavescens had the lowest. The mean species composite mercury concentration was positively correlated with a factor incorporating the average size and age of the fish. Lakes containing fish with high mercury concentrations were not clustered near known industrial or population centers but were commonest in the area within 150 km of the seacoast, reflecting the geographical distribution of species that contained higher mercury concentrations. Stocked and wild brook trout were not different in length or weight, but wild fish were older and had higher mercury concentrations. Fish populations maintained by frequent introductions of hatchery-produced fish and subject to high angler exploitation rates may consist of younger fish with lower exposure to environmental mercury and thus contain lower concentrations than wild populations.

Stafford, C.P. [Univ. of Maine, Orono, ME (United States); Haines, T.A. [Geological Survey, Orono, ME (United States)

1997-01-01T23:59:59.000Z

128

Advanced evacuated tubular concentrator research  

SciTech Connect

Previous research projects led to the conceptual development and proof-of-concept of an advanced evacuated concentrating solar collector tube. The basic idea involves the integration of a nonimaging Compound Parabolic Concentrator (CPC) inside an evacuated tube and coupled to a spectrally selective absorber. An experimental panel of these tubes achieved the highest operating efficiency at high temperatures ever measured with a non-tracking stationary solar collector. Subsequent studies have indicated that a mass-producible collector, incorporating the same concepts, can be developed which will deliver excellent performance across a broad range of temperatures, extending from about 50{degrees}C (suitable for domestic hot water and space heating) to well above 200{degrees}C (suitable for space cooling, process steam and many other end uses). Some form of advanced Integrated CPC (ICPC) remains the only simple and effective method for delivering solar thermal energy efficiently throughout the temperature range from 50{degrees}C to about 300{degrees}C without tracking. It has the potential to make practical and economical several cooling technologies which are otherwise not viable. In addition to its potential for driving cooling systems, this technology also provides a highly versatile solar source for virtually all thermal end uses including general purpose space and domestic hot water heating as well as industrial process heat. Research efforts have been directed towards designing and prototyping a manufacturable version of such a collector tube. We have been pursuing several paths. These include: (1) a small tube version, 52mm in diameter, based on the use of the T-17 commercially produced fluorescent glass tubing, which is the largest size lamp tubing produced in high volume in the United States, and (2) a large tube version, 125mm in diameter, compatible with the commercial design manufactured until recently by Corning France (the CORTEC collector).

Winston, R.; O'Gallagher, J.J.

1992-06-01T23:59:59.000Z

129

Georgia Tech spiral concentrator: an innovative design  

Science Conference Proceedings (OSTI)

A new, low cost, high performance solar energy concentrator has been developed at Georgia Tech. It is based on Fresnel reflector principles, and is formed by slightly winding a flat spiral of reflective material and securing it to a planar frame. Special focal distributions are easily designed into the concentrator. A wide variety of applications exist for this new device, ranging from generation of industrial process heat to solar cooking.

Steenblik, R.A.; Bomar, S.H. Jr.

1981-01-01T23:59:59.000Z

130

Si concentrator solar cell development. [Final report  

DOE Green Energy (OSTI)

This is the final report of a program to develop a commercial, high-efficiency, low-cost concentrator solar cell compatible with Spectrolab`s existing manufacturing infrastructure for space solar cells. The period covered is between 1991 and 1993. The program was funded through Sandia National Laboratories through the DOE concentrator initiative and, was also cost shared by Spectrolab. As a result of this program, Spectrolab implemented solar cells achieving an efficiency of over 19% at 200 to 300X concentration. The cells are compatible with DOE guidelines for a cell price necessary to achieve a cost of electricity of 12 cents a kilowatthour.

Krut, D.D. [Spectrolab, Inc., Sylmar, CA (United States)

1994-10-01T23:59:59.000Z

131

Photovoltaic solar concentrator module  

DOE Patents (OSTI)

This invention consists of a planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation which includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

Chiang, C.J.

1991-05-16T23:59:59.000Z

132

NREL: Concentrating Solar Power Research - Laboratory Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Capabilities Laboratory Capabilities To research, develop, and test a variety of concentrating solar power technologies, NREL features the following laboratory capabilities: High-Flux Solar Furnace (HFSF) Large Payload Solar Tracker Advanced Optical Materials Laboratory Advanced Thermal Storage Materials Laboratory Optical Testing Laboratory and Beam Characterization System Receiver Test Laboratory Heat Collection Element (HCE) Temperature Survey Photo of NREL's High-Flux Solar Furnace. NREL's High-Flux Solar Furnace. High-Flux Solar Furnace (HFSF) The power generated at NREL's High-Flux Solar Furnace (HFSF) can be used to expose, test, and evaluate many components-such as receivers, collectors, and reflector materials-used in concentrating solar power systems. The 10-kilowatt HFSF consists of a tracking heliostat and 25 hexagonal

133

Concentrating Photovoltaic Module Testing at NREL's Concentrating Solar Radiation Users Facility  

DOE Green Energy (OSTI)

There has been much recent interest in photovoltaic modules designed to operate with concentrated sunlight (>100 suns). Concentrating photovoltaic (CPV) technology offers an exciting new opportunity as a viable alternative to dish Stirling engines. Advantages of CPV include potential for>40% cell efficiency in the long term (25% now), no moving parts, no intervening heat transfer surface, near-ambient temperature operation, no thermal mass, fast response, concentration reduces cost of cells relative to optics, and scalable to a range of sizes. Over the last few years, we have conducted testing of several CPV modules for DOEs Concentrating Solar Power (CSP) program. The testing facilities are located at the Concentrating Solar Radiation Users Facility (CRULF) and consist the 10 kW High-Flux Solar Furnace (HFSF) and a 14m2 Concentrating Technologies, LLC (CTEK) dish. This paper will primarily describe the test capabilities; module test results will be detailed in the presentation.

Bingham, C.; Lewandowski, A.; Stone, K.; Sherif, R.; Ortabasi, U.; Kusek, S.

2003-05-01T23:59:59.000Z

134

Markets for concentrating solar power  

DOE Green Energy (OSTI)

The report describes the markets for concentrating solar power. As concentrating solar power technologies advance into the early stages of commercialization, their economic potential becomes more sharply defined and increasingly tangible.

Not Available

1998-04-01T23:59:59.000Z

135

Linear Concentrator System Basics for Concentrating Solar Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Linear Concentrator System Basics for Concentrating Solar Power Linear Concentrator System Basics for Concentrating Solar Power Linear Concentrator System Basics for Concentrating Solar Power August 20, 2013 - 4:45pm Addthis Photo of numerous parallel rows of parabolic trough collectors tracking the sun. Cooling towers and other generator equipment are in the midst of the troughs, and two water tanks are in the background. The Solar Electric Generating Station IV power plant in California consists of many parallel rows of parabolic trough collectors that track the sun. The cooling towers can be seen with the water plume rising into the air, and white water tanks are in the background. Credit: Sandia National Laboratory / PIX 14955 Linear concentrating solar power (CSP) collectors capture the sun's energy with large mirrors that reflect and focus the sunlight onto a linear

136

NREL: Concentrating Solar Power Research - Southwest Concentrating Solar  

NLE Websites -- All DOE Office Websites (Extended Search)

Southwest Concentrating Solar Power 1000-MW Initiative Southwest Concentrating Solar Power 1000-MW Initiative Photos of various concentrating solar power systems. NREL, working through SunLab, supports the U.S. Department of Energy's goal to install 1,000 megawatts (MW) of new concentrating solar power systems in the southwestern United States by 2010. This level of deployment, combined with research and development to reduce technology component costs, could help reduce concentrating solar power electricity costs to $0.07/kilowatt-hour. At this cost, concentrating solar power can compete effectively in the Southwest's energy markets. To achieve the Initiative's goal, the U.S. Department of Energy is partnering with the Western Governors' Association to encourage concentrating solar power installations in Arizona, California, Colorado,

137

Energy Basics: Concentrator Photovoltaic Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

138

Energy Basics: Concentrating Solar Power  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Concentrating Solar Power Linear...

139

Concentrating solar power | Open Energy Information  

Open Energy Info (EERE)

Concentrating Solar Power Basics (The following text is derived from NREL's concentrating solar power information page.)[1] Concentrating solar power (CSP) offers a utility-scale, firm, dispatchable renewable energy option that can help meet our nation's demand for electricity. CSP plants produce power by first using mirrors to focus sunlight to heat a working fluid. Ultimately, this high-temperature fluid is used to spin a turbine or power an engine that drives a generator. And the final product is electricity. Smaller CSP systems can be located directly where the power is needed. Larger, utility-scale CSP applications provide hundreds of megawatts of electricity for the power grid. Both linear concentrator and power tower systems can be easily integrated with thermal storage, helping to generate

140

Low-Cost Installation of Concentrating Photovoltaic  

E-Print Network (OSTI)

Low-Cost Installation of Concentrating Photovoltaic Renewable Energy Research Renewable Energy Research http://www.energy.ca.gov/research/renewabl e/index.html August 2011 The Issue Several factors inhibit the potential growth of the California photovoltaic market: high installation costs, expenses

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Planar micro-optic solar concentration  

E-Print Network (OSTI)

such as compound parabolic concentrators and nonimagingas kaleidoscopes or compound parabolic concentrators whicha variation of the compound parabolic concentrator, however,

Karp, Jason Harris

2010-01-01T23:59:59.000Z

142

Cylindrical Acoustic Levitator/Concentrator  

NLE Websites -- All DOE Office Websites (Extended Search)

Cylindrical Acoustic Levitator/Concentrator Cylindrical Acoustic Levitator/Concentrator Cylindrical Acoustic Levitator/Concentrator A low-power, inexpensive acoustic apparatus for levitation and/or concentration of aerosols and small liquid/solid samples having particulates up to several millimeters in diameter in air or other fluids is described. Available for thumbnail of Feynman Center (505) 665-9090 Email Cylindrical Acoustic Levitator/Concentrator A low-power, inexpensive acoustic apparatus for levitation and/or concentration of aerosols and small liquid/solid samples having particulates up to several millimeters in diameter in air or other fluids is described. It is constructed from a commercially available, hollow cylindrical piezoelectric crystal which has been modified to tune the resonance frequency of the breathing mode resonance of the crystal to that

143

High-Pressure Micellar Solutions of Symmetric and Asymmetric Styrene?Diene Diblocks in Compressible Near Critical Solvents: Micellization Pressures and Cloud Pressures Respond but Micellar Cloud Pressures Insensitive to Copolymer Molecular Weight, Concentration, and Block Ratio Changes  

Science Conference Proceedings (OSTI)

Micellar solutions of polystyrene-block-polybutadiene and polystyrene-block-polyisoprene in propane are found to exhibit significantly lower cloud pressures than the corresponding hypothetical nonmicellar solutions. Such a cloud-pressure reduction indicates the extent to which micelle formation enhances the apparent diblock solubility in near-critical and hence compressible propane. Concentration-dependent pressure-temperature points beyond which no micelles can be formed, referred to as the micellization end points, are found to depend on the block type, size, and ratio. The cloud-pressure reduction and the micellization end point measured for styrene-diene diblocks in propane should be characteristic of all amphiphilic diblock copolymer solutions that form micelles in compressible solvents.

Winoto, Winoto [University of Wyoming, Laramie; Tan, Sugata [University of Wyoming, Laramie; Shen, Youqin [University of Wyoming, Laramie; Radosz, Maciej [University of Wyoming, Laramie; Hong, Kunlun [ORNL; Mays, Jimmy [ORNL

2009-01-01T23:59:59.000Z

144

ARM - Measurement - CO2 concentration  

NLE Websites -- All DOE Office Websites (Extended Search)

: CO2 concentration The amount of carbon dioxide, a heavy, colorless greenhouse gas, per unit of volume. Categories Atmospheric Carbon Instruments The above measurement is...

145

Energy Basics: Concentrating Solar Power  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

use mirrors to reflect and concentrate sunlight onto receivers that collect solar energy and convert it to heat. This thermal energy can then be used to produce electricity...

146

Cylindrical Acoustic Levitator/Concentrator  

NLE Websites -- All DOE Office Websites (Extended Search)

A low-power, inexpensive acoustic apparatus for levitation andor concentration of aerosols and small liquidsolid samples having particulates up to several millimeters in...

147

SunShot Initiative: Concentrating Solar Power  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Power SunShot CSP Team Learn more about the SunShot concentrating solar power program staff by visiting the team's profile pages. Argonne National Laboratory Argonne National Laboratory High-Efficiency Thermal Energy Storage System for CSP University of California Los Angeles University of California Los Angeles High Operating Temperature Liquid Metal Heat Transfer Fluids Jet Propulsion Laborator Jet Propulsion Laboratory Low-Cost, Lightweight Solar Concentrators Abengoa Solar Abengoa Solar Advanced Nitrate Salt Central Receiver Power Plant HiTek Services HiTek Services Low-Cost Heliostat Development The Department of Energy (DOE) supports research and development of concentrating solar power (CSP) technologies as a unique path to achieve SunShot Initiative cost targets with systems that can supply solar power on demand through the use of thermal storage. CSP technologies use mirrors to reflect and concentrate sunlight onto receivers that collect solar energy and convert it to heat. Thermal energy can then be used to produce electricity via a turbine or heat engine driving a generator.

148

Low-Cost, Lightweight Solar Concentrators  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrators Concentrators California Institute of Technology/Jet Propulsion Laboratory Award Number:0595-1612 | January 15, 2013 | Ganapathi Thin Film mirror is ~40-50% cheaper and 60% lighter than SOA * Project leverages extensive space experience by JPL and L'Garde to develop a low-cost parabolic dish capable of providing 4 kW thermal. Key features: * Metallized reflective thin film material with high reflectivity (>93%) with polyurethane foam backing * Single mold polyurethane backing fabrication enables low cost high production manufacturing * Ease of panel installation and removal enables repairs and results in a low total life cycle cost * Deployment of multiple dishes enhances system level optimizations by simulating larger fields which addresses issues like shared resources

149

ARM - Measurement - Organic Carbon Concentration  

NLE Websites -- All DOE Office Websites (Extended Search)

govMeasurementsOrganic Carbon Concentration govMeasurementsOrganic Carbon Concentration ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Organic Carbon Concentration The concentration of carbon bound in organic compounds. Categories Aerosols Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments ACSM : Aerosol Chemical Speciation Monitor Field Campaign Instruments AEROSCARBON : Aerosol Carbon Analyzer AEROSMASSSPEC : Aerosol Mass Spectrometer Datastreams AOS : Aerosol Observing System Datastreams

150

Carbothermic Reduction of Niobium Concentrate  

Science Conference Proceedings (OSTI)

Abstract Scope, Ferro Niobium is produced by aluminothermic reduction of the ... However, the niobium concentrate has impurities, such as phosphorus, lead and tin, ... Phase Transformation of Andalusite-Mullite and Its Fiber Reinforcement to ...

151

Concentrated solar power on demand  

E-Print Network (OSTI)

This thesis describes a new concentrating solar power central receiver system with integral thermal storage. Hillside mounted heliostats direct sunlight into a volumetric absorption molten salt pool, which also functions ...

Codd, Daniel Shawn

2011-01-01T23:59:59.000Z

152

CONCENTRATION OF CESIUM-137 BY ALGAE  

SciTech Connect

The adsorption-absorption of Cs/sup 137/ by algae is of interest because Cs/sup 137/ of the critical fission products in power reactor wastes and atomic weapon fall-out. It is well known that plankton takes up radioactivity in fairly high concentrations. The purpose of this investigation was to study the accumulation of Cs/sup 137/ by fresh water-algae. (A.C.)

Williams, L.G.; Swanson, H.D.

1958-01-24T23:59:59.000Z

153

Material for a luminescent solar concentrator  

DOE Patents (OSTI)

A material for use in a luminescent solar concentrator, formed by ceramitizing the luminescent ion Cr/sup 3 +/ with a transparent ceramic glass containing mullite. The resultant material has tiny Cr/sup 3 +/-bearing crystallites dispersed uniformly through an amorphous glass. The invention combines the high luminescent efficiency of Cr/sup 3 +/ in the crystalline phase with the practical and economical advantages of glass technology.

Andrews, L.J.

1984-01-01T23:59:59.000Z

154

NREL: Concentrating Solar Power Research - Concentrating Solar Power  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power Resource Maps Concentrating Solar Power Resource Maps These direct-normal solar radiation maps-filtered by solar resource and land availability-identify the most economically suitable lands available for deploying of large-scale concentrating solar power plants in the southwestern United States. Each of the following seven states, as well as the southwestern U.S. region, has two maps: the left and right maps represent analyses excluding land with slopes >1% and >3%, respectively. Lower-resolution jpg versions are available below; much higher-resolution pdf files, suitable for plotting large-scale posters, can be requested. You can also access an unfiltered direct-normal solar radiation map of the southwestern United States. Download Adobe Reader. Southwestern U.S.

155

Concentrator Photovoltaic Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrator Photovoltaic Systems Concentrator Photovoltaic Systems August 20, 2013 - 4:12pm Addthis Concentrator photovoltaic (PV) systems use less solar cell material than other...

156

Concentrating Solar Power Resources and Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrating Solar Power Resources and Technologies Concentrating Solar Power Resources and Technologies Concentrating Solar Power Resources and Technologies October 7, 2013 - 11:47am Addthis Photo of a CSP dish glistening in the sun. Multiple solar mirrors reflect sunlight onto a collector. CSP systems concentrate solar heat onto a collector, which powers a turbine to generate electricity. This page provides a brief overview of concentrating solar power (CSP) technologies supplemented by specific information to apply CSP within the Federal sector. Overview Concentrating solar power technologies produce electricity by concentrating the sun's energy using reflective devices, such as troughs or mirror panels, to reflect sunlight onto a receiver. The resulting high-temperature heat is used to power a conventional turbine to produce electricity.

157

ARM - Measurement - Trace gas concentration  

NLE Websites -- All DOE Office Websites (Extended Search)

govMeasurementsTrace gas concentration govMeasurementsTrace gas concentration ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Trace gas concentration The amount per unit volume of trace gases other than carbon dioxide, ozone and water vapor, typically measured in conjunction with in situ aerosol measurements, e.g. carbon monoxide, nitrogen oxides, sulfur dioxide. Categories Atmospheric Carbon, Atmospheric State Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments CO : Carbon Monoxide Mixing Ratio System

158

CAST STONE FORMULATION AT HIGHER SODIUM CONCENTRATIONS  

SciTech Connect

A low temperature waste form known as Cast Stone is being considered to provide supplemental Low Activity Waste (LAW) immobilization capacity for the Hanford site. Formulation of Cast Stone at high sodium concentrations is of interest since a significant reduction in the necessary volume of Cast Stone and subsequent disposal costs could be achieved if an acceptable waste form can be produced with a high sodium molarity salt solution combined with a high water to premix (or dry blend) ratio. The objectives of this study were to evaluate the factors involved with increasing the sodium concentration in Cast Stone, including production and performance properties and the retention and release of specific components of interest. Three factors were identified for the experimental matrix: the concentration of sodium in the simulated salt solution, the water to premix ratio, and the blast furnace slag portion of the premix. The salt solution simulants used in this study were formulated to represent the overall average waste composition. The cement, blast furnace slag, and fly ash were sourced from a supplier in the Hanford area in order to be representative. The test mixes were prepared in the laboratory and fresh properties were measured. Fresh density increased with increasing sodium molarity and with decreasing water to premix ratio, as expected given the individual densities of these components. Rheology measurements showed that all of the test mixes produced very fluid slurries. The fresh density and rheology data are of potential value in designing a future Cast Stone production facility. Standing water and density gradient testing showed that settling is not of particular concern for the high sodium compositions studied. Heat of hydration measurements may provide some insight into the reactions that occur within the test mixes, which may in turn be related to the properties and performance of the waste form. These measurements showed that increased sodium concentration in the salt solution reduced the time to peak heat flow, and reducing the amount of slag in the premix increased the time to peak heat flow. These observations may help to describe some of the cured properties of the samples, in particular the differences in compressive strength observed after 28 and 90 days of curing. Samples were cured for at least 28 days at ambient temperature in the laboratory prior to cured properties analyses. The low activity waste form for disposal at the Hanford Site is required to have a compressive strength of at least 500 psi. After 28 days of curing, several of the test mixes had mean compressive strengths that were below the 500 psi requirement. Higher sodium concentrations and higher water to premix ratios led to reduced compressive strength. Higher fly ash concentrations decreased the compressive strength after 28 days of curing. This may be explained in that the cementitious phases matured more quickly in the mixes with higher concentrations of slag, as evidenced by the data for the time to peak heat generation. All of the test mixes exhibited higher mean compressive strengths after 90 days of curing, with only one composition having a mean compressive strength of less than 500 psi. Leach indices were determined for the test mixes for contaminants of interest. The leaching performance of the mixes evaluated in this study was not particularly sensitive to the factors used in the experimental design. This may be beneficial in demonstrating that the performance of the waste form is robust with respect to changes in the mix composition. The results of this study demonstrate the potential to achieve significantly higher waste loadings in Cast Stone and other low temperature, cementitious waste forms. Additional work is needed to elucidate the hydration mechanisms occurring in Cast Stone formulated with highly concentrated salt solutions since these reactions are responsible for determining the performance of the cured waste form. The thermal analyses completed in this study provide some preliminary insight, although the limited

Fox, K.; Edwards, T.; Roberts, K.

2013-10-02T23:59:59.000Z

159

CAST STONE FORMULATION AT HIGHER SODIUM CONCENTRATIONS  

SciTech Connect

A low temperature waste form known as Cast Stone is being considered to provide supplemental Low Activity Waste (LAW) immobilization capacity for the Hanford site. Formulation of Cast Stone at high sodium concentrations is of interest since a significant reduction in the necessary volume of Cast Stone and subsequent disposal costs could be achieved if an acceptable waste form can be produced with a high sodium molarity salt solution combined with a high water to premix (or dry blend) ratio. The objectives of this study were to evaluate the factors involved with increasing the sodium concentration in Cast Stone, including production and performance properties and the retention and release of specific components of interest. Three factors were identified for the experimental matrix: the concentration of sodium in the simulated salt solution, the water to premix ratio, and the blast furnace slag portion of the premix. The salt solution simulants used in this study were formulated to represent the overall average waste composition. The cement, blast furnace slag, and fly ash were sourced from a supplier in the Hanford area in order to be representative. The test mixes were prepared in the laboratory and fresh properties were measured. Fresh density increased with increasing sodium molarity and with decreasing water to premix ratio, as expected given the individual densities of these components. Rheology measurements showed that all of the test mixes produced very fluid slurries. The fresh density and rheology data are of potential value in designing a future Cast Stone production facility. Standing water and density gradient testing showed that settling is not of particular concern for the high sodium compositions studied. Heat of hydration measurements may provide some insight into the reactions that occur within the test mixes, which may in turn be related to the properties and performance of the waste form. These measurements showed that increased sodium concentration in the salt solution reduced the time to peak heat flow, and reducing the amount of slag in the premix increased the time to peak heat flow. These observations may help to describe some of the cured properties of the samples, in particular the differences in compressive strength observed after 28 and 90 days of curing. Samples were cured for at least 28 days at ambient temperature in the laboratory prior to cured properties analyses. The low activity waste form for disposal at the Hanford Site is required to have a compressive strength of at least 500 psi. After 28 days of curing, several of the test mixes had mean compressive strengths that were below the 500 psi requirement. Higher sodium concentrations and higher water to premix ratios led to reduced compressive strength. Higher fly ash concentrations decreased the compressive strength after 28 days of curing. This may be explained in that the cementitious phases matured more quickly in the mixes with higher concentrations of slag, as evidenced by the data for the time to peak heat generation. All of the test mixes exhibited higher mean compressive strengths after 90 days of curing, with only one composition having a mean compressive strength of less than 500 psi. Leach indices were determined for the test mixes for contaminants of interest. The leaching performance of the mixes evaluated in this study was not particularly sensitive to the factors used in the experimental design. This may be beneficial in demonstrating that the performance of the waste form is robust with respect to changes in the mix composition. The results of this study demonstrate the potential to achieve significantly higher waste loadings in Cast Stone and other low temperature, cementitious waste forms. Additional work is needed to elucidate the hydration mechanisms occurring in Cast Stone formulated with highly concentrated salt solutions since these reactions are responsible for determining the performance of the cured waste form. The thermal analyses completed in this study provide some preliminary insight, although the limited

Fox, K.; Roberts, K.; Edwards, T.

2013-09-17T23:59:59.000Z

160

Concentrating Solar Power | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrating Solar Power Concentrating Solar Power August 20, 2013 - 4:38pm Addthis Text Version This solar concentrator has a fixed-focus faceted dish with a concentration of...

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Solar Tracing Sensors for Maximum Solar Concentrator ...  

Concentrating Solar Power (CSP) relies on thermodynamic processes to convert concentrated light into useful forms of energy. Accurate sun tracking ...

162

Survey of Iron and Nickel Concentrations in PWR Primary Coolant  

Science Conference Proceedings (OSTI)

The concentrations of iron and nickel corrosion products in primary coolant water were measured at eleven different pressurized water reactors. Two reactors experienced anomalies in the axial power distribution during the cycles that were sampled. The axial power distribution anomalies appeared to be associated with high-coolant nickel concentrations early in the fuel cycle.

2001-07-27T23:59:59.000Z

163

Sustainable Energy Science and Engineering Center Concentrating Collectors  

E-Print Network (OSTI)

reflector; c) Plane receiver with plane reflector; d) parabolic concentrator; e) Fresnel reflector f) Array that are faced at different angles so that light falling on any ring is focused to the same point. Parabolic trough collector: A high-temperature (above 360K) solar thermal concentrator with the capacity

Krothapalli, Anjaneyulu

164

Secondary concentrators for parabolic dish solar thermal power systems  

SciTech Connect

One approach to production of electricity or high-temperature process heat from solar energy is to use point-focusing, two-axis pointing concentrators in a distributed-receiver solar thermal system. This paper discusses some of the possibilities and problems in using compound concentrators in parabolic dish systems. 18 refs.

Jaffe, L.D.; Poon, P.T.

1981-01-01T23:59:59.000Z

165

Concentrating solar collector: technical note  

DOE Green Energy (OSTI)

The Acurex Model 3002 concentrator is a reflecting parabolic trough collector designed to heat liquids or gases to temperatures between 140/sup 0/F and 350/sup 0/F. The cost effectiveness, performance, reliability, and technical description of the collector are presented.

Not Available

1984-01-01T23:59:59.000Z

166

Novel materials and devices for sunlight concentrating systems  

Science Conference Proceedings (OSTI)

Photovoltaic conversion under concentrated sunlight is a highly promising technique that could make solar-electric power generation economically competitive with fossil fuel power generation by the mid-1980s. An economic analysis has been performed which ...

H. J. Hovel

1978-03-01T23:59:59.000Z

167

Market concentration and marketing power among electricity generators in Texas  

SciTech Connect

Policy initiatives designed to foster competition among electricity generators in Texas face a special challenge due to the relative isolation of that system. This isolation contributes to high levels of market concentration and market power that could hinder the development of a truly competitive market. This paper examines market concentration and market power in the ERCOT market for electricity generation by calculating the Herfindahl-Hirschman index (HHI) under various assumptions to gauge the degree of market concentration among generators in ERCOT. In addition, some ongoing studies of market power in ERCOT are discussed. The distinction between market concentration and market power is highlighted.

Zarnikau, J.; Lam, A. [Planergy Inc., Austin, TX (United States)

1998-11-01T23:59:59.000Z

168

High-Efficiency, Self-Concentrating Nanoscale Solar Cell  

While solar cells have the potential to provide clean energy for a large portion of the earth's population, no one technology has provided the right ...

169

Ultrafine particle concentrations and exposures in four high...  

NLE Websites -- All DOE Office Websites (Extended Search)

the four sites, averaged over the few-day duration of monitoring at each site, spanned an order of magnitude, from 2800 to 29,100 cm-3. This wide range resulted from differences...

170

High-Efficiency, Self-Concentrating Nanoscale Solar Cell - Energy ...  

While solar cells have the potential to provide clean energy for a large portion of the earth’s population, no one technology has provided the right combination of ...

171

NREL GIS Data: Hawaii High Resolution Concentrating Solar Power  

Open Energy Info (EERE)

data, and monthly averages of atmospheric water vapor, trace gases, and the amount of aerosols in the atmosphere to calculate the hourly total insolation (sun and sky) falling on a...

172

NREL GIS Data: Continental United States High Resolution Concentrating  

Open Energy Info (EERE)

on cloud cover, atmostpheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and...

173

Potential Role of Concentrating Solar Power in Enabling High...  

NLE Websites -- All DOE Office Websites (Extended Search)

associated evolution of the U.S. grid to 2050. The SunShot Vision Study evaluated the impact of low-cost solar technologies, while the Renewable Electricity Futures Study analyzed...

174

Concentrating Solar Power Program overview  

DOE Green Energy (OSTI)

Over the last decade, the US solar thermal industry has established a track record in the power industry by building and operating utility-scale power plants with a combined rated capacity of 354 megawatts (MW). The technology used in these power plants is based on years of research and development (R and D), much of it sponsored by the US Department of Energy (DOE). DOE`s Concentrating Solar Power (CSP) Program is collaborating with its partners in the private sector to develop two new solar technologies -- power towers and dish/engines -- to meet the huge commercial potential for solar power.

NONE

1998-04-01T23:59:59.000Z

175

Mathematical modeling of solar concentrators  

DOE Green Energy (OSTI)

A computational capability that models the operation of any solar energy collector that uses flux concentrators is a valuable aid in the planning, design, construction, calibration, safety analysis, and operation of the system. In addition to the usual optical considerations, the model should treat such imperfections as reflecting-surface slope errors, suntracking and alignment errors, and mirror-focusing errors. It should properly account for the angular distribution of incoming sun rays and the effects of atmospheric transmission on this distribution. A model with these capabilities is described, and two computer programs for implementing it are illustrated.

Biggs, F.; Vittitoe, C.N.

1976-01-01T23:59:59.000Z

176

Development of a commercial photovoltaic concentrator module  

DOE Green Energy (OSTI)

The ojective of this work was to develop the design and prototype of a commercial high-concentration photovoltaic (PV) module. The design is for a 282-sun point-focus concentrating module. Most of the components, subassemblies, and design features incorporate simplifications and ease of manufacturing. The Solar Kinetics, Inc. (SKI) module is designed to incorporate high-efficiency, single-crystal silicon PV cells. The housing is made with aluminum laminated for voltage stand-off and simultaneously providing high thermal conductivity. The Fresnel lens injection molded by American Optical (AO) as singles. The cell assembly consists of a copper heat spreader, a photovoltaic cell soldered, a top and bottom contact, and a reflective secondary optical element (SOE). The cell assemblies passed all of the initial electrical characterization and high-potential tests. Under environmental cycling, the only bond that failed was the PV cell-to-heat spreader interface. The other components (top contact, bottom contact, SOE) passed all the environmental cycling tests. The cell assemblies were designed to be mounted onto the receiver section with a thermally conductive RTV. This geometry was subjected to environmental testing. There was no delamination of this bond nor was there electrical breakdown when the assemblies were subjected to the hi-pot test. A mock module was fabricated for environmental evaluation. This module was subjected to the humidity/freeze cycling to assess the performance of the lens mounting design. This module was also subjected to the rain test after the humidity/freeze cycling and checked for water leaks. The lens showed small displacement from its original position after the environmental cycling. One tablespoon of water did collect inside the module.

Saifee, S.T.; Hutchison, G. [Solar Kinetics, Inc., Dallas, TX (United States)

1992-09-01T23:59:59.000Z

177

Optimizing luminescent solar concentrator design.  

DOE Green Energy (OSTI)

Luminescent Solar Concentrators (LSCs) use fluorescent materials and light guides to convert direct and diffuse sunlight into concentrated wavelength-shifted light that produces electrical power in small photovoltaic (PV) cells with the goal of significantly reducing the cost of solar energy utilization. In this paper we present an optimization analysis based on the implementation of a genetic algorithm (GA) subroutine to a numerical ray-tracing Monte Carlo model of an LSC, SIMSOLAR-P. The initial use of the GA implementation in SIMSOLAR-P is to find the optimal parameters of a hypothetical 'perfect luminescent material' that obeys the Kennard Stepanov (K-S) thermodynamic relationship between emission and absorption. The optimization balances the efficiency losses in the wavelength shift and PV conversion with the efficiency losses due to re-scattering of light out of the collector. The theoretical limits of efficiency are provided for one, two and three layer configurations; the results show that a single layer configuration is far from optimal and adding a second layer in the LSC with wavelength shifted material in the near infrared region significantly increases the power output, while the gain in power by adding a third layer is relatively small. The results of this study provide a theoretical upper limit to the performance of an LSC and give guidance for the properties required for luminescent materials, such as quantum nanocrystals, to operate efficiently in planar LSC configurations.

Hernandez-Noyola, H.; Potterveld, D. H.; Holt, R. J.; Darling, S. B. (Center for Nanoscale Materials); ( PHY)

2012-01-01T23:59:59.000Z

178

Gas and Particulate Concentration Measurements and ...  

Science Conference Proceedings (OSTI)

... to the species of interest as gas concentration standards ... for low concentrations and toxic and reactive gases. ... data set correlating liquid-phase fuels ...

2012-10-01T23:59:59.000Z

179

Concentrating Solar Power Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrating Solar Power Facilities Concentrating Solar Power Facilities Florida Hawaii Southwest U.S. Addthis Browse By Topic TOPICS Energy Efficiency ---Home Energy Audits...

180

Federal Energy Management Program: Concentrating Solar Power...  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power Resources and Technologies to someone by E-mail Share Federal Energy Management Program: Concentrating Solar Power Resources and Technologies on Facebook...

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Optical pH Sensors for High Temperature Environments  

Science Conference Proceedings (OSTI)

A novel pH measurement system based on remote absorption spectroscopy via two uni-directional optical fibers has been developed for use in cooling water sampling lines in power plants. The system was designed to operate at 200 degrees Celsius (392 degrees Fahrenheit) and 1379 kPa (200 psi) and, so far, has been shown to measure reproducibly the pH of a flowing stream at room temperature and 1379 kPa (200 psi).

2000-11-28T23:59:59.000Z

182

Sintering Process of Chromite Concentrate  

Science Conference Proceedings (OSTI)

Chemical Enrichment of Precious Metals in Iron Sulfides Using Microwave Energy · Chloridizing ... Co-Gasification Behavior of Metallurgical Coke with High and Low Reactivity .... Thermal Plasma Torches for Metallurgical Applications.

183

SunShot Initiative: Concentrating Solar Power  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power to Concentrating Solar Power to someone by E-mail Share SunShot Initiative: Concentrating Solar Power on Facebook Tweet about SunShot Initiative: Concentrating Solar Power on Twitter Bookmark SunShot Initiative: Concentrating Solar Power on Google Bookmark SunShot Initiative: Concentrating Solar Power on Delicious Rank SunShot Initiative: Concentrating Solar Power on Digg Find More places to share SunShot Initiative: Concentrating Solar Power on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards Staff Photovoltaics Systems Integration Balance of Systems Concentrating Solar Power SunShot CSP Team Learn more about the SunShot concentrating solar power program staff by visiting the team's profile pages. Argonne National Laboratory Argonne National Laboratory

184

Sustainable Energy Science and Engineering Center Concentrating Collectors  

E-Print Network (OSTI)

. Parabolic trough collector: A high-temperature (above 360K) solar thermal concentrator with the capacity) Tubular absorbers with specular cusp reflector; c) Plane receiver with plane reflector; d) parabolic for tracking the sun using one axis of rotation. It uses a trough covered with a highly reflective surface

Krothapalli, Anjaneyulu

185

Concentrating Solar Power: Technology Overview  

Science Conference Proceedings (OSTI)

Concentrating Solar Power (CSP) has the potential to contribute significantly to the generation of electricity by renewable energy resources in the U.S.. Thermal storage can extend the duty cycle of CSP beyond daytime hours to early evening where the value of electricity is often the highest. The potential solar resource for the southwest U.S. is identified, along with the need to add power lines to bring the power to consumers. CSP plants in the U.S. and abroad are described. The CSP cost of electricity at the busbar is discussed. With current incentives, CSP is approaching competiveness with conventional gas-fired systems during peak-demand hours when the price of electricity is the highest. It is projected that a mature CSP industry of over 4 GWe will be able to reduce the energy cost by about 50%, and that U.S. capacity could be 120 GW by 2050.

Mehos, M.

2008-01-01T23:59:59.000Z

186

Parabolic concentrating collector: a tutorial  

DOE Green Energy (OSTI)

A tutorial overview of point-focusing parabolic collectors is presented. Optical and thermal characteristics of such collectors are discussed. Data representing typical achievable collector efficiencies are presented and the importance of balancing collector cost with concentrator quality is argued through the development of a figure of merit for the collector. The impact of receiver temperature on performance is assessed and the general observation made that temperatures much in excess of 1500 to 2000/sup 0/F can actually result in decreased performance. Various types of two-axis tracking collectors are described, including the standard parabolic deep dish, Cassegrainian and Fresnel, as well as two forms of fixed mirrors with articulating receivers. The present DOE program to develop these devices is briefly discussed, as are present and projected costs for these collectors. Pricing information is presented for the only known commercial design available on the open market.

Truscello, V.C.

1979-02-15T23:59:59.000Z

187

A new trough solar concentrator and its performance analysis  

SciTech Connect

The operation principle and design method of a new trough solar concentrator is presented in this paper. Some important design parameters about the concentrator are analyzed and optimized. Their magnitude ranges are given. Some characteristic parameters about the concentrator are compared with that of the conventional parabolic trough solar concentrator. The factors having influence on the performance of the unit are discussed. It is indicated through the analysis that the new trough solar concentrator can actualize reflection focusing for the sun light using multiple curved surface compound method. It also has the advantages of improving the work performance and environment of high-temperature solar absorber and enhancing the configuration intensity of the reflection surface. (author)

Tao, Tao; Hongfei, Zheng [School of Mechanical and Vehicular, Beijing Institute of Technology, Beijing 100081 (China); Kaiyan, He [School of Physical Science and Technology, Guangxi University, Nanning 530004 (China); Mayere, Abdulkarim [Institute of Sustainable Energy Technology, University of Nottingham, Nottingham NG7 2RD (United Kingdom)

2011-01-15T23:59:59.000Z

188

Energy Conversion – Photovoltaic, Concentrating Solar Power, and ...  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2012. Symposium, Energy Conversion – Photovoltaic, Concentrating Solar Power, and  ...

189

Word Pro - Untitled1  

U.S. Energy Information Administration (EIA) Indexed Site

6 Solar Thermal Collector Shipments by Type, Price, and Trade 6 Solar Thermal Collector Shipments by Type, Price, and Trade Total Shipments, 1974-2009 Trade, 1978-2009 Price of Total Shipments, 1986-2009 Number of U.S. Manufacturers by Type of Collector, 1974-2009 Average Annual Shipments per Manufacturer, 1974-2009 292 U.S. Energy Information Administration / Annual Energy Review 2011 1 Prices are not adjusted for inflation. See "Nominal Dollars" in Glossary. 2 Collectors that generally operate in the temperature range of 140 degrees Fahrenheit to 180 degrees Fahrenheit but can also operate at temperatures as low as 110 degrees Fahrenheit. Special collectors-evacuated tube collectors or concentrating (focusing) collectors-are included in the medium-temperature category. 3 Collectors that generally operate at temperatures below 110 degrees Fahrenheit.

190

Limit of concentration under extended nonhomogeneous light sources  

SciTech Connect

Static photovoltaic concentrators, which see the sky as an extended distribution of radiance, are analyzed in a general way. The rules for achieving the highest energy on the cell are derived and the appropriate figures of merit are defined. It is concluded that casting increasingly high values of energy on the cell, which would be bifacial, require collecting a lower portion of the total sky energy. The corresponding figures of merit for the concentrators of the CPC family are analyzed, concluding that a better type of concentrator should be developed for photovoltaic applications.

Minano, J.C.; Luque, A.

1983-09-01T23:59:59.000Z

191

Concentrating Solar Power (Fact Sheet)  

DOE Green Energy (OSTI)

Concentrating Solar Power (CSP) offers a utility-scale, firm, dispatchable renewable energy option that can help meet the nation's goal of making solar energy cost competitive with other energy sources by the end of the decade. The DOE SunShot Initiative is a collaborative national initiative to make solar energy technologies cost-competitive with other forms of energy by reducing the cost of solar energy systems by about 75% by the end of the decade. Reducing the total installed cost for utility-scale solar electricity to roughly 6 cents per kilowatt hour without subsidies will result in rapid, large-scale adoption of solar electricity across the United States. Reaching this goal will re-establish American technological leadership, improve the nation's energy security, and strengthen U.S. economic competitiveness in the global clean energy race. SunShot will work to bring down the full cost of solar - including the costs of solar cells and installation by focusing on four main pillars: (1) Technologies for solar cells and arrays that convert sunlight to energy; (2) Electronics that optimize the performance of the installation; (3) Improvements in the efficiency of solar manufacturing processes; and (4) Installation, design, and permitting for solar energy systems.

Not Available

2011-10-01T23:59:59.000Z

192

Planar photovoltaic solar concentrator module  

DOE Patents (OSTI)

A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor. 5 figs.

Chiang, C.J.

1992-12-01T23:59:59.000Z

193

Planar photovoltaic solar concentrator module  

DOE Patents (OSTI)

A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

Chiang, Clement J. (New Brunswick, NJ)

1992-01-01T23:59:59.000Z

194

Optical analysis of semi and compound hyperbolic spiral solar concentrator  

SciTech Connect

In the last few years, considerable efforts have gone into the developments of non-imaging solar concentrators. They are characterized by their moderate concentration ratios (up to 10) and large angle of acceptance which allows the collection of more diffuse radiation as well as direct beam. They have the advantage of high temperature output of focusing concentrators but without diurnal tracking. The most successful one of such concentrator type is the compound parabolic (CPC) which has been extensively studied by numerous investigators. However, it is idealized for the use with flat absorber which suffers from parasitic rear loss and inefficient evacuation for the suppression of convective loss. It has also an over heating problem due to the concentration of solar radiation upon the surface of the absorber in the focal line. In the way of continuous development of the non-imaging concentrators, the authors present here the design and optical analysis of a compound hyperbolic spiral concentrator (CHSC). Its surface of reflection consists of two identical segments of a hyperbolic spiral curve, arranged symmetrical about an axis of symmetry as given. Its optical characterestics are studied and compared with those of the previously discussed HSC which will be designated as semi hyperbolic spiral concentrator (SHSC).

Rabie, L.H.

1983-12-01T23:59:59.000Z

195

Exploratory study of complexant concentrate waste processing  

SciTech Connect

The purpose of this exploratory study, conducted by Pacific Northwest Laboratory for Westinghouse Hanford Company, was to determine the effect of applying advanced chemical separations technologies to the processing and disposal of high-level wastes (HLW) stored in underground tanks. The major goals of this study were to determine (1) if the wastes can be partitioned into a small volume of HLW plus a large volume of low-level waste (LLW), and (2) if the activity in the LLW can be lowered enough to meet NRC Class LLW criteria. This report presents the results obtained in a brief scouting study of various processes for separating radionuclides from Hanford complexant concentrate (CC) waste.

Lumetta, G.J.; Bray, L.A.; Kurath, D.E.; Morrey, J.R.; Swanson, J.L.; Wester, D.W.

1993-02-01T23:59:59.000Z

196

Concentrator Photovoltaic System Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrator Photovoltaic System Basics Concentrator Photovoltaic System Basics Concentrator Photovoltaic System Basics August 20, 2013 - 4:12pm Addthis Concentrator photovoltaic (PV) systems use less solar cell material than other PV systems. PV cells are the most expensive components of a PV system, on a per-area basis. A concentrator makes use of relatively inexpensive materials such as plastic lenses and metal housings to capture the solar energy shining on a fairly large area and focus that energy onto a smaller area-the solar cell. One measure of the effectiveness of this approach is the concentration ratio-in other words, how much concentration the cell is receiving. Concentrator PV systems have several advantages over flat-plate systems. First, concentrator systems reduce the size or number of cells needed and

197

Upper bounds for the yearly energy delivery of stationary solar concentrators and the implications for concentrator optical design  

SciTech Connect

Compound parabolic concentrator (CPC) type collectors have been viewed as the optimal design for totally stationary concentrators. However the CPC is ideal only for uniform incident solar flux averaged over the energy collection period. The actual yearly-averaged incident flux map turns out to be highly non-uniform, as a function of projected incidence angle, which implies that concentration can be increased markedly if optical collection efficiency is compromised. The question then becomes: what concentrator angular acceptance function is best matched to nature`s radiation flux input, and how much energy can such a concentrator deliver? The recently-invented tailored edge-ray concentrator (TERC) approach could be used to determine optimal reflector contours, given the optimal acceptance angle function. We demonstrate that totally stationary TERCs can have around three times the geometric concentration of corresponding optimized stationary CPCs, with greater energy delivery per absorber area, in particular for applications that are currently being considered for stationary evacuated concentrators with the latest low-emissivity selective coating, e.g., solar-driven double-stage absorption chillers (at around 170{degree}C) and solar thermal power generation (at around 250{degree}C). 20 refs., 3 figs., 2 tabs.

Gordon, J.M. [Ben-Gurion Univ. of the Negev, Sede Boqer Campus (Israel)]|[Ben-Gurion Univ. of the Negev, Beersheva (Israel); Lasken, M. [Ben-Gurion Univ. of the Negev, Sede Boqer Campus (Israel); Ries, H. [Paul Scherrer Inst., Villigen (Switzerland)

1996-10-01T23:59:59.000Z

198

Effects of CCN Concentrations on Stratus Clouds  

Science Conference Proceedings (OSTI)

Comparisons between cloud-base CCN concentrations and cloud droplet concentrations in stratus clouds over San Diego and 100 km out to sea showed a positive correlation. The supersaturation in these clouds, as derived from the matching of the CCN ...

James G. Hudson

1983-02-01T23:59:59.000Z

199

Estimating Contaminant Release Concentrations from Hanford ...  

& Transport Model Long-Term Performance Assessment ... sludge provide upper limit on future releases. 9 Metals Concentrations in Hanford Tank ...

200

Mercury concentrations in tissues of Florida bald eagles  

Science Conference Proceedings (OSTI)

We collected 48 blood and 61 feather samples from nestling bald eagles at 42 nests and adult feather samples from 20 nests in north and central Florida during 1991-93. We obtained 32 liver, 10 feather, and 5 blood samples from 33 eagle carcasses recovered in Florida during 1987-93. For nestlings, mercury concentrations in blood (GM = 0.16 ppm wet wt) and feather (GM = 3.23 ppm) samples were correlated (r = 0.69, P = 0.0001). Although nestlings had lower mercury concentrations in feathers than did adults (GM = 6.03 ppm), the feather mercury levels in nestlings and adults from the same nest were correlated (r = 0.63, P eagles (GM = 0.23 ppm) was similar to Florida nestlings but some Florida nestlings had blood mercury concentrations up to 0.61 ppm, more than twice as high as captive adults. Feather mercury concentrations in both nestlings and adults exceeded those in captive eagles, but concentrations in all tissues were similar to, or lower than, those in bald eagles from other wild populations. Although mercury concentrations in Florida eagles are below those that cause mortality, they are in the range of concentrations that can cause behavioral changes or reduce reproduction. We recommend periodic monitoring of mercury in Florida bald eagles for early detection of mercury increases before negative effects on reproduction occur. 26 refs., 5 figs., 2 tabs.

Wood, P.B.; Wood, J.M. [Wes Virginia Univ., Morgantown, WV (United States); White, J.H. [Florida Game and Fresh Water Fish Commission, Eustis, FL (United States)] [and others

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Stable, concentrated solutions of polyaniline using amines as gel inhibitors  

DOE Patents (OSTI)

Stable, concentrated solutions of high-molecular weight polyaniline using amines as gel inhibitors. Certain amine compounds (gel inhibitors) are used to form highly concentrated, stable solutions of the emeraldine base form of polyaniline in numerous organic solvents from which coatings, films and fibers are readily prepared without problems associated with rapid gelation which occurs when concentrated solutions are attempted without the use of the gel inhibitors of the present invention. Tertiary amines are used to solubilize low-molecular weight fractions (M.sub.w <120,000, M.sub.n <30,000) of the pernigraniline, emeraldine, and leucoemeraldine oxidation states of polyaniline as concentrated (>20 wt. %) polyaniline solutions, while primary and secondary amines are used to produce solutions having 15-40 wt % of high-molecular weight polyaniline [M.sub.w.gtoreq.120,000, M.sub.n.gtoreq.30,000]. Concentrated solutions of polyaniline co-polymers or ring and/or nitrogen-substituted polyanilines may also be prepared.

Wang, Hsing-Lin (Los Alamos, NM); Mattes, Benjamin R. (Tesuque, NM)

2002-01-01T23:59:59.000Z

202

Nonimaging concentrators for solar thermal energy. Final report  

DOE Green Energy (OSTI)

A small experimental solar collector test facility has been established on the campus of the University of Chicago. This capability has been used to explore applications of nonimaging optics for solar thermal concentration in three substantially different configurations: (1) a single stage system with moderate concentration on an evacuated absorber (a 5.25X evacuated tube Compound Parabolic Concentrator or CPC), (2) a two stage system with high concentration and a non-evacuated absorber (a 16X Fresnel lens/CPC type mirror) and (3) moderate concentration single stage systems with non-evacuated absorbers for lower temperature (a 3X and a 6.5X CPC). Prototypes of each of these systems have been designed, built and tested. The performance characteristics are presented. In addition a 73 m/sup 2/ experimental array of 3X non-evacuated CPC's has been installed in a school heating system on the Navajo Indian Reservation in New Mexico. The full array has a peak noon time efficiency of approx. 50% at ..delta..T = 50/sup 0/C above ambient and has supplied about half the school's heat load for the past two heating seasons. Several theoretical features of nonimaging concentration have been investigated including their long term energy collecting behavior. The measured performance of the different systems shows clearly that non-tracking concentrators can provide solar thermal energy from moderately high low temperature regimes (> 50/sup 0/C above ambient) up into the mid-temperature region (well above 200/sup 0/C above ambient). The measured efficiency at 220/sup 0/C for the 5.25X CPC was as high or higher than that for any of the commercial tracking systems tested.

Winston, R.

1980-03-21T23:59:59.000Z

203

Proppant concentrator boosts foam frac effectiveness  

Science Conference Proceedings (OSTI)

A recently introduced propant concentrator appears to be reducing downtime and enhancing the overall effectiveness and practicality of foam fracturing. The basic purpose behind the proppant concentrator is to provide a method to allow higher proppant concentrations to be run in foam stimulation treatments. A concentrator removes liquid while pumping to allow a higher proppant load to be delivered to the well. This is accomplished by injecting the fluid/proppant slurry, which has been preblended, and passing it through a standard screen or centrifugal device. This allows removal of up to 50% of the liquid portion of the slurry and achieves a doubling of the proppant concentration prior to being foamed.

Not Available

1981-11-01T23:59:59.000Z

204

Nanofluidic Concentration Device for Biomolecules Utilizing Ion Concentration Polarization: Theory, Fabrication, and Applications  

E-Print Network (OSTI)

Recently, a new type of electrokinetic concentration devices has been developed in a microfluidic chip format, which allows efficient trapping and concentration of biomolecules by utilizing ion concentration polarization ...

Kim, Sung Jae

205

IMPACT OF OXYGEN CONCENTRATION ON ZEBRA MUSSEL MORTALITY  

SciTech Connect

These tests have indicated that the bacterium Pseudomonas fluorescens strain CL0145A is effective at killing zebra mussels in environments having dissolved oxygen (DO) concentrations ranging from very low to very high. The results suggest that the highest mussel kill can be achieved in moderately to highly aerated environments, while kill may be 0-20% lower under conditions of very low oxygen. For example, under highly oxygenated conditions 97% kill was achieved while conditions having low DO produced 79% mussel kill. Service water measured in a local power plant indicated that DO concentrations were in the range of 8-9 ppm (e.g., highly aerated) within their pipes. Therefore, we will not expect to see decreases in the efficacy of CL0145A treatments due to oxygen levels within such power plant pipes.

Daniel P. Molloy

2003-01-27T23:59:59.000Z

206

Manufacturing injection-moleded Fresnel lens parquets for point-focus concentrating photovoltaic systems  

DOE Green Energy (OSTI)

This project involved the manufacturing of curved-faceted, injection-molded, four-element Fresnel lens parquets for concentrating photovoltaic arrays. Previous efforts showed that high-efficiency (greater than 82%) Fresnel concentrators could be injection molded. This report encompasses the mold design, molding, and physical testing of a four-lens parquet for a solar photovoltaic concentrator system.

Peters, E.M.; Masso, J.D. [AOtec, Southbridge, MA (United States)

1995-10-01T23:59:59.000Z

207

Concentric core optical fiber with multiple-mode signal transmission  

DOE Patents (OSTI)

A concentric core optical fiber provides for the simultaneous but independent transmission of signals over a single optical fiber. The concentric optical fiber is constructed of a single-mode or multimode inner optical fiber defined by a core and a cladding of a lower index of refraction than the core and an outer optical fiber defined by additional cladding concentrically disposed around the cladding and of an index of refraction lower than the first mentioned cladding whereby the latter functions as the core of the outer optical fiber. By employing such an optical fiber construction with a single-mode inner core or optical fiber, highly sensitive interferometric and stable less sensitive amplitude based sensors can be placed along the same length of a concentric core optical fiber. Also, by employing the concentric core optical fiber secure telecommunications can be achieved via the inner optical fiber since an intrusion of the concentric optical fiber will first cause a variation in the light being transmitted through the outer optical fiber and this variation of light being used to trigger a suitable alarm indicative of the intrusion. 3 figs.

Muhs, J.D.

1997-05-06T23:59:59.000Z

208

Concentric core optical fiber with multiple-mode signal transmission  

DOE Patents (OSTI)

A concentric core optical fiber provides for the simultaneous but independent transmission of signals over a single optical fiber. The concentric optical fiber is constructed of a single-mode or multimode inner optical fiber defined by a core and a cladding of a lower index of refraction than the core and an outer optical fiber defined by additional cladding concentrically disposed around the cladding and of an index of refraction lower than the first mentioned cladding whereby the latter functions as the core of the outer optical fiber. By employing such an optical fiber construction with a single-mode inner core or optical fiber, highly sensitive interferometric and stable less sensitive amplitude based sensors can be placed along the same length of a concentric core optical fiber. Also, by employing the concentric core optical fiber secure telecommunications can be achieved via the inner optical fiber since an intrusion of the concentric optical fiber will first cause a variation in the light being transmitted through the outer optical fiber and this variation of light being used to trigger a suitable alarm indicative of the intrusion.

Muhs, Jeffrey D. (Lenoir City, TN)

1997-01-01T23:59:59.000Z

209

Concentrating Solar Power Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Basics Basics Concentrating Solar Power Basics August 20, 2013 - 4:38pm Addthis Text Version This solar concentrator has a fixed-focus faceted dish with a concentration of about 250 suns. This system can be used for large fields connected to the utility grid, hydrogen generation, or water pumping. Credit: Science Applications International Corporation / PIX 13464 Concentrating solar power (CSP) technologies use mirrors to reflect and concentrate sunlight onto receivers that collect solar energy and convert it to heat. This thermal energy can then be used to produce electricity via a steam turbine or heat engine that drives a generator. Concentrating solar power offers a utility-scale, firm, dispatchable renewable energy option that can help meet our nation's demand for

210

Electrodiffusive model for astrocytic and neuronal ion concentration dynamics  

E-Print Network (OSTI)

Electrical neural signalling typically takes place at the time-scale of milliseconds, and is typically modeled using the cable equation. This is a good approximation for processes when ionic concentrations vary little during the time course of a simulation. During periods of intense neural signalling, however, the local extracellular K+ concentration may increase by several millimolars. Clearance of excess K+ likely depends partly on diffusion in the extracellular space, partly on local uptake by- and intracellular transport within astrocytes. This process takes place at the time scale of seconds, and can not be modeled accurately without accounting for the spatiotemporal variations in ion concentrations. The work presented here consists of two main parts: First, we developed a general electrodiffusive formalism for modeling ion concentration dynamics in a one-dimensional geometry, including both an intra- and extracellular domain. The formalism was based on the Nernst-Planck equations. It ensures (i) consistency between the membrane potential and ion concentrations, (ii) global particle/charge conservation, and (iii) accounts for diffusion and concentration dependent variations in resistivities. Second, we applied the formalism to model how astrocytes exchange ions with the ECS, and identified the key astrocytic mechanisms involved in K+ removal from high concentration regions. We found that a local increase in extracellular K\\textsuperscript{+} evoked a local depolarization of the astrocyte membrane, which at the same time (i) increased the local astrocytic uptake of K\\textsuperscript{+}, (ii) suppressed extracellular transport of K+, (iii) increased transport of K+ within astrocytes, and (iv) facilitated astrocytic relase of K+ in extracellular low concentration regions. In summary, these mechanisms seem optimal for shielding the extracellular space from excess K+.

Geir Halnes; Ivar Řstby; Klas H. Pettersen; Stig W. Omholt; Gaute T. Einevoll

2013-04-29T23:59:59.000Z

211

Reductions in ozone concentrations due to controls on variability in industrial flare emissions in Houston, Texas  

E-Print Network (OSTI)

High concentrations of ozone in the Houston/Galveston area are associated with industrial plumes of highly reactive hydrocarbons, mixed with NOx. The emissions leading to these plumes can have significant temporal variability, ...

Nam, Junsang

2007-01-01T23:59:59.000Z

212

Automated Micro-Tracking Planar Solar Concentrators.  

E-Print Network (OSTI)

?? One aim of solar concentrators is to reduce the cost of a solar power systems by reducing the amount of expensive semiconductor used in… (more)

Hallas, Justin Matthew

2011-01-01T23:59:59.000Z

213

Modeling Carbon Concentration Profiles in Austenitic Stainless ...  

Science Conference Proceedings (OSTI)

Presentation Title, Modeling Carbon Concentration Profiles in Austenitic Stainless Steels Carburized at Low Temperatures. Author(s), Gary M. Michal, Xiaoting ...

214

Production mechanisms, number concentration, size distribution...  

NLE Websites -- All DOE Office Websites (Extended Search)

Wiley Online Library (wileyonlinelibrary.com) DOI: 10.1002asl2.441 Meeting Report Production mechanisms, number concentration, size distribution, chemical composition, and...

215

Status of photovoltaic concentrator modules and systems  

DOE Green Energy (OSTI)

Several leading line- and point-focus photovoltaic concentrator system development programs are reviewed, including those by ENTECH, SEA Corporation, AMONIX, and Alpha Solarco. Concentrating collectors and trackers are gaining maturity and reaching product status as designs are made more manufacturable and reliable. Utilities are starting to take notice of this emerging technology, and several privately-funded utility installations are underway. Several advantages are offered by concentrators, including low system and capital cost and rapid production ramp-up. These are discussed along with issues generally raised concerning concentrator technology.

Maish, A.B.

1994-04-01T23:59:59.000Z

216

Gravity Gold Concentration at Newmont Mining  

Science Conference Proceedings (OSTI)

Abstract Scope, The process of gold recovery by gravity concentration is incorporated ... Energy Management Planning, Following the ISO 50001 Draft Standard.

217

PV FAQs: What's New in Concentrating PV?  

DOE Green Energy (OSTI)

This publication, one in a series of PV FAQs, addresses concentrating PV: what it is, how it works, the challenges it faces, recent breakthroughs, and its future direction.

Not Available

2005-02-01T23:59:59.000Z

218

NREL: Concentrating Solar Power Projects Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

of concentrating solar power plants. Activities include testing large-scale systems and developing advanced technologies, components, instrumentation, and analysis techniques....

219

NREL: Concentrating Solar Power Research - Technology Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Basics Concentrating solar power (CSP) technologies can be a major contributor to our nation's future need for new, clean sources of energy, particularly in the Western...

220

Concentrating Solar Power: Energy from Mirrors  

DOE Green Energy (OSTI)

This fact sheet explains how concentrating solar power technology works and the three types of systems in development today: trough, dish, and central receiver.

Poole, L.

2001-02-27T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Alignment method for parabolic trough solar concentrators  

DOE Patents (OSTI)

A Theoretical Overlay Photographic (TOP) alignment method uses the overlay of a theoretical projected image of a perfectly aligned concentrator on a photographic image of the concentrator to align the mirror facets of a parabolic trough solar concentrator. The alignment method is practical and straightforward, and inherently aligns the mirror facets to the receiver. When integrated with clinometer measurements for which gravity and mechanical drag effects have been accounted for and which are made in a manner and location consistent with the alignment method, all of the mirrors on a common drive can be aligned and optimized for any concentrator orientation.

Diver, Richard B. (Albuquerque, NM)

2010-02-23T23:59:59.000Z

222

NREL: Concentrating Solar Power Research - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Your name: Your email address: Your message: Send Message Printable Version Concentrating Solar Power Research Home Projects Research Staff Working with Us Data & Resources...

223

A solar concentrating photovoltaic/thermal collector.  

E-Print Network (OSTI)

??This thesis discusses aspects of a novel solar concentrating photovoltaic / thermal (PV/T) collector that has been designed to produce both electricity and hot water.… (more)

Coventry, Joseph S

2008-01-01T23:59:59.000Z

224

TOPCAT Solar Cell Alignment & Energy Concentration Technology ...  

Patent 7,667,833: Alignment method for parabolic trough solar concentrators A Theoretical Overlay Photographic (TOP) alignment method uses the overlay of a ...

225

Concentrating Solar Power (Revised) (Fact Sheet)  

SciTech Connect

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its concentrating solar power subprogram.

Not Available

2010-11-01T23:59:59.000Z

226

Advanced solar concentrator development in the United States  

DOE Green Energy (OSTI)

Sandia National Laboratories is the lead laboratory for the United States Department of Energy's program to develop, build, and test advanced solar concentrators that are low in cost, have high performance, and demonstrate a long lifetime. The principal focus of DOE's concentrator program is on the development of heliostats for central receiver power plants and point focus parabolic dishes for use with a 25-kWe Stirling engine. The status and future plans of DOE's program in each area are reviewed. 29 refs., 7 figs.

Alpert, D.J.

1990-01-01T23:59:59.000Z

227

Generating Hydrogen through Water Electrolysis using Concentrator Photovoltaics  

Science Conference Proceedings (OSTI)

Hydrogen can be an important element in reducing global climate change if the feedstock and process to produce the hydrogen are carbon free. Using nuclear energy to power a high temperature water electrolysis process meets these constraints while another uses heat and electricity from solar electric concentrators. Nuclear researchers have estimated the cost of hydrogen generated in this fashion and we will compare their estimates with those we have made for generating hydrogen using electricity and waste heat from a dish concentrator photovoltaic system. The conclusion is that the costs are comparable and low enough to compete with gasoline costs in the not too distant future.

McConnell, R.; Thompson, J.

2005-01-01T23:59:59.000Z

228

Definition: Concentrating solar power | Open Energy Information  

Open Energy Info (EERE)

Dictionary.png Dictionary.png Concentrating solar power Technologies that use mirrors to reflect and concentrate sunlight onto receivers that collect solar energy and convert it to heat. This thermal energy can then be used to produce electricity via a steam turbine or heat engine that drives a generator.[1][2] View on Wikipedia Wikipedia Definition . ]] File:El-v-01 ubt. jpeg Sustainable energy Renewable energy Anaerobic digestion Hydroelectricity · Geothermal Microgeneration · Solar Tidal · Wave · Wind Energy conservation Cogeneration · Energy efficiency Geothermal heat pump Green building · Passive Solar Sustainable transport Plug-in hybrids · Electric vehicles File:Terra- edge blur. png Environment Portal v · d · e Concentrated solar power (also called concentrating solar power, concentrated solar thermal, and CSP) systems use

229

SunShot Initiative: Baseload Concentrating Solar Power Generation  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power Generation Concentrating Solar Power Generation In 2010, DOE issued the Baseload Concentrating Solar Power (CSP) Generation funding opportunity announcement (FOA). The following projects were selected under this competitive solicitation: Abengoa: Advanced Nitrate Salt Central Receiver Power Plant eSolar: Modular and Scalable Baseload Molten Salt Plant Conceptual Design and Feasibility General Atomics: Baseload CSP Generation Integrated with Sulfur-Based Thermochemical Heat Storage HiTek: Low-Cost Heliostat Development Infinia: Innovative Phase Change Thermal Energy Storage Solution for Baseload Power PPG: Next-Generation Low-Cost Reflector Rocketdyne: Solar Power Tower Improvements with the Potential to Reduce Costs SENER: High-Efficiency Thermal Storage System for Solar Plants

230

Maximally concentrating optics for photovoltaic solar energy conversion  

DOE Green Energy (OSTI)

The use of a two-stage concentrator with a fresnel lens primary and a non-imaging dielectric totally internally reflecting secondary, has unique advantages for photovoltaic concentration. This new design has a much larger acceptance angle than the conventional lens-cell concentrating system. In the continuation of this research, an optimally designed prototype which employs a 13.6-cm diameter flat fresnel tons as the primary focusing device, a dielectric compound hyperbolic concentrator (DCHC) as secondary and a 1-cm diameter high-concentration cell for electricity conversion has been built, tested and analyzed. Measurements under sunlight show that it has an angular acceptance of [plus minus]3.6 degrees, which is dramatically better than the [plus minus]0.5 degree achievable without a secondary concentrator. This performance agrees well with theoretical ray-tracing predictions. The secondary shows an optical efficiency of (91[plus minus]2)% at normal incidence. Combining with the primary fresnel tens which has an optical efficiency of (82[plus minus]2)%, tho two-stage system yields a total optical efficiency of (7l[plus minus]2)%. The measurement of the system electrical performance yielded a net electrical efficiency of 11.9%. No problems associated with non-uniform cell illumination were found, as evidenced by the excellent fill factor of (79[plus minus]2)% measured under concentration. The secondary geometrical properties and the optimal two-stage design procedures for various primary- cell combinations were systematical studied. A general design principle has been developed.

Winston, R.; O'Gallagher, J.; Ning, X.

1986-02-27T23:59:59.000Z

231

Airborne concentrations of asbestos in 71 school buildings  

Science Conference Proceedings (OSTI)

A total of 473 air samples from 71 schools scheduled for abatement (328 indoor static samples, 51 personal samples, and 94 outdoor samples) were analyzed by transmission electron microscopy techniques. Six measures of asbestos-in-air concentration were considered: (1) total asbestos structures per cubic centimeter: (2) chrysotile structures per cubic centimeter; (3) amphibole structures per cubic centimeter; (4) structures per cubic centimeter at least 0.5 micron long and at least five times wide; (5) structures per cubic centimeter at least 5 microns long; and (6) structures per cubic centimeter at least 5 microns long and at least 0.2 micron wide. The average concentration of chrysotile structures in indoor air samples was 0.017 structures/cm{sup 3}; the average concentration of amphibole structures was 0.0015 structure/cm{sup 3}. Ninety-five percent of structures found were chrysotile. The average concentrations of all structures were significantly higher indoors than outdoors (P less than 0.001). The average concentration of structures more than 5 microns long indoors was 0.00023 structure/cm{sup 3}. None of the following factors were significantly correlated with asbestos concentrations in air: type of asbestos-containing materials (ACM) present, condition of ACM, accessibility of ACM to students, whether ACM were covered, air flow, or whether sweeping was noted during sample collection. In addition, asbestos-in-air concentrations were not significantly different in different types of schools (high, intermediate or elementary) or in schools constructed in different time periods. Lastly, there was no correlation between the mineral type of asbestos found in the air and the type found in samples of bulk material.

Corn, M.; Crump, K.; Farrar, D.B.; Lee, R.J.; McFee, D.R. (Johns Hopkins Univ., Baltimore, MD (USA))

1991-02-01T23:59:59.000Z

232

Performance, problems, and expectations of concentrator photovoltaic systems  

DOE Green Energy (OSTI)

The photovoltaic cell or solar cell can be used to convert sunlight directly into electrical energy and its relatively simple construction and absence of moving parts make these devices attractive for terrestrial power generation applications. The primary problem preventing large-scale application is the very high cost of solar cell arrays. For example, the most advanced solar cell is the silicon cell and, currently in the United States, silicon solar arrays cost about $15,000 per peak kilowatt in moderately large quantities. One approach to reducing the cost of solar cell arrays is to concentrate sunlight on the cells and increase the specific output power density of the cells. In this approach, expensive solar cell area is replaced by, hopefully, less expensive reflective or refractive concentrator materials. The United States Energy Research and Development Administration (ERDA) is supporting a program to develop concentrator photovoltaic systems with the primary objective to develop low-cost reliable systems for widespread terrestrial applications. The specific long-term cost goal for these systems is $500 per peak kilowatt by 1982. The most promising solar cell systems for concentrator applications are silicon and galium arsenide and these materials have received the most attention to date in the ERDA program. Design, preliminary performance testing results, and cost estimates for concentrator photovoltaic systems are discussed.

Burgess, E.L.

1977-01-01T23:59:59.000Z

233

Fundamental Limits to Position Determination by Concentration Gradients  

E-Print Network (OSTI)

Position determination in biological systems is often achieved through protein concentration gradients. Measuring the local concentration of such a protein with a spatially-varying distribution allows the measurement of position within the system. In order for these systems to work effectively, position determination must be robust to noise. Here, we calculate fundamental limits to the precision of position determination by concentration gradients due to unavoidable biochemical noise perturbing the gradients. We focus on gradient proteins with first order reaction kinetics. Systems of this type have been experimentally characterised in both developmental and cell biology settings. For a single gradient we show that, through time-averaging, great precision can potentially be achieved even with very low protein copy numbers. As a second example, we investigate the ability of a system with oppositely directed gradients to find its centre. With this mechanism, positional precision close to the centre improves more slowly with increasing averaging time, and so longer averaging times or higher copy numbers are required for high precision. For both single and double gradients, we demonstrate the existence of optimal length scales for the gradients, where precision is maximized, as well as analyzing how precision depends on the size of the concentration measuring apparatus. Our results provide fundamental constraints on the positional precision supplied by concentration gradients in various contexts, including both in developmental biology and also within a single cell.

Filipe Tostevin; Pieter Rein ten Wolde; Martin Howard

2007-04-26T23:59:59.000Z

234

Effect of lactose concentration on batch production of ethanol from cheese whey using Candida pseudotropicalis  

SciTech Connect

The effect of lactose concentration on growth of Candida pseudotropicalis and ethanol production from cheese whey under batch conditions was investigated. Four initial lactose concentrations ranging from 50 to 200 g/L (5 to 20% wt/vol) were used. High concentration of lactose had an inhibitory effect on the specific growth rate, lactose utilization rate, and ethanol production rate. The maximum cell concentration was influenced by the initial substrate concentration as well as ethanol concentration. Inhibition of ethanol production was more pronounced at higher initial lactose concentrations. The maximum ethanol yield (96.6% of the theoretical yield) was achieved with the 100 g/L initial substrate concentration. The results indicated that pH control during alcohol fermentation of cheese whey is not necessary. 41 refs., 12 figs., 1 tab.

Ghaly, A.E.; El-Taweel, A.A. [Technical Univ. of Nova Scotia, Halifax (Canada)

1995-07-01T23:59:59.000Z

235

Entanglement concentration of three-partite states  

Science Conference Proceedings (OSTI)

We investigate the concentration of multiparty entanglement by focusing on a simple family of three-partite pure states, superpositions of Greenberger-Horne-Zeilinger states and singlets. Despite the simplicity of the states, we show that they cannot be reversibly concentrated by the standard entanglement concentration procedure, to which they seem ideally suited. Our results cast doubt on the idea that for each N there might be a finite set of N-party states into which any pure state can be reversibly transformed. We further relate our results to the concept of locking of entanglement of formation.

Groisman, Berry [HH Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Linden, Noah [Department of Mathematics, University of Bristol, University Walk, Bristol BS8 1TH (United Kingdom); Popescu, Sandu [HH Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Hewlett-Packard Laboratories, Stoke Gifford, Bristol BS12 6QZ (United Kingdom)

2005-12-15T23:59:59.000Z

236

NREL: Concentrating Solar Power Research - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications NREL develops publications, including technical reports and papers, about its R&D activities in concentrating solar power, as well as related information. Below you'll find a list of selected NREL publications concerning these activities. Also see TroughNet's publications on parabolic trough technology, and market and economic assessment. For other NREL concentrating solar power publications, you can search NREL's Publications Database. Selected Publications These publications are available as Adobe Acrobat PDFs. Utility-Scale Power Tower Solar Systems: Performance Acceptance Test Guidelines NREL Subcontract Report Author: David Kearney - Kearney & Associates Publication Date: March 2013 Simulating the Value of Concentrating Solar Power with Thermal Energy

237

Concentric ring flywheel without expansion separators  

DOE Patents (OSTI)

A concentric ring flywheel wherein the adjacent rings are configured to eliminate the need for differential expansion separators between the adjacent rings. This is accomplished by forming a circumferential step on an outer surface of an inner concentric ring and forming a matching circumferential step on the inner surface of an adjacent outer concentric ring. During operation the circumferential steps allow the rings to differentially expand due to the difference in the radius of the rings without the formation of gaps therebetween, thereby eliminating the need for expansion separators to take up the gaps formed by differential expansion.

Kuklo, Thomas C. (Oakdale, CA)

1999-01-01T23:59:59.000Z

238

Concentric ring flywheel without expansion separators  

DOE Patents (OSTI)

A concentric ring flywheel wherein the adjacent rings are configured to eliminate the need for differential expansion separators between the adjacent rings. This is accomplished by forming a circumferential step on an outer surface of an inner concentric ring and forming a matching circumferential step on the inner surface of an adjacent outer concentric ring. During operation the circumferential steps allow the rings to differentially expand due to the difference in the radius of the rings without the formation of gaps therebetween, thereby eliminating the need for expansion separators to take up the gaps formed by differential expansion. 3 figs.

Kuklo, T.C.

1999-08-24T23:59:59.000Z

239

VSHOT Measurements of Distal II Dish Concentrators  

DOE Green Energy (OSTI)

The Video Scanning Hartmann Optical Tester (VSHOT) is a laser ray-trace tool for measuring the slope error of solar concentrator mirrors. The VSHOT measurements made on two, 8.5-m diameter, Distal II dishes represent its first use on a concentrator installed and operating in the field. A number of valuable lessons were learned regarding the use of the VSHOT for outdoor testing. The two dishes were found to have overall figure-of-merit RMS slope errors from an ideal parabola of 2.99 and 3.18 milliradians. The VSHOT measurements compare well qualitatively with distant observer photographs made using a colored concentric ring target.

Jones, S.A.

1998-12-14T23:59:59.000Z

240

Chromium (III), Titanium (III), and Vanadium (IV) sensitization of rare earth complexes for luminescent solar concentrator applications  

E-Print Network (OSTI)

High optical concentrations without excess heating in a stationary system can be achieved with a luminescent solar concentrator (LSC). Neodymium (Nd) and ytterbium (Yb) are excellent infrared LSC materials: inexpensive, ...

Thompson, Nicholas John

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

NREL: Concentrating Solar Power Research - Particle Receiver...  

NLE Websites -- All DOE Office Websites (Extended Search)

Bed-Novel Components to Overcome Existing Barriers Advancing concentrating solar power (CSP) systems to the target cost of 0.06 per kilowatt-hour, set by the U.S. Department of...

242

Analytical Solutions for Cloud-Drop Concentration  

Science Conference Proceedings (OSTI)

This note compares and evaluates the analytical solutions of Squires and Twomey for cloud droplet concentration. Either solution is likely to be fairly accurate (±30%) when the slope parameter (?) of the cloud condensation nuclei distribution is ...

David B. Johnson

1981-01-01T23:59:59.000Z

243

Linear Concentrator Systems | Open Energy Information  

Open Energy Info (EERE)

Linear Concentrator Systems Linear Concentrator Systems Jump to: navigation, search Introduction Linear concentrating collector fields consist of a large number of collectors in parallel rows that are typically aligned in a north-south orientation to maximize both annual and summertime energy collection. With a single-axis sun-tracking system, this configuration enables the mirrors to track the sun from east to west during the day, ensuring that the sun reflects continuously onto the receiver tubes. Parabolic Trough Systems The predominant CSP systems currently in operation in the United States are linear concentrators using parabolic trough collectors. In such a system, the receiver tube is positioned along the focal line of each parabola-shaped reflector. The tube is fixed to the mirror structure and

244

Gas concentration cells for utilizing energy  

DOE Patents (OSTI)

An apparatus and method for utilizing energy, in which the apparatus may be used for generating electricity or as a heat pump. When used as an electrical generator, two gas concentration cells are connected in a closed gas circuit. The first gas concentration cell is heated and generates electricity. The second gas concentration cell repressurizes the gas which travels between the cells. The electrical energy which is generated by the first cell drives the second cell as well as an electrical load. When used as a heat pump, two gas concentration cells are connected in a closed gas circuit. The first cell is supplied with electrical energy from a direct current source and releases heat. The second cell absorbs heat. The apparatus has no moving parts and thus approximates a heat engine.

Salomon, Robert E. (Philadelphia, PA)

1987-01-01T23:59:59.000Z

245

Gas concentration cells for utilizing energy  

DOE Patents (OSTI)

An apparatus and method are disclosed for utilizing energy, in which the apparatus may be used for generating electricity or as a heat pump. When used as an electrical generator, two gas concentration cells are connected in a closed gas circuit. The first gas concentration cell is heated and generates electricity. The second gas concentration cell repressurizes the gas which travels between the cells. The electrical energy which is generated by the first cell drives the second cell as well as an electrical load. When used as a heat pump, two gas concentration cells are connected in a closed gas circuit. The first cell is supplied with electrical energy from a direct current source and releases heat. The second cell absorbs heat. The apparatus has no moving parts and thus approximates a heat engine. 4 figs.

Salomon, R.E.

1987-06-30T23:59:59.000Z

246

Power Tower Systems for Concentrating Solar Power  

Energy.gov (U.S. Department of Energy (DOE))

In power tower concentrating solar power systems, numerous large, flat, sun-tracking mirrors, known as heliostats, focus sunlight onto a receiver at the top of a tall tower. A heat-transfer fluid...

247

What does stabilizing greenhouse gas concentrations mean?  

E-Print Network (OSTI)

The MIT Emissions Prediction and Policy Analysis (EPPA) model is applied to an exploration of the national emissions obligations that would be required to stabilize atmospheric CO2 concentrations at levels now under active ...

Jacoby, Henry D.; Schmalensee, Richard.; Reiner, David M.

248

Concentrating Solar Power Commercial Application Study  

E-Print Network (OSTI)

Concentrating Solar Power Technologies............................................... 7 Parabolic Troughs power technologies are described in this report: parabolic troughs, linear Fresnel, power towers, and dish/engine. Parabolic troughs are the most commercially available technology. Linear Fresnel and power

Laughlin, Robert B.

249

NREL: Learning - Concentrating Solar Power Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power Basics Many power plants today use fossil fuels as a heat source to boil water. The steam from the boiling water spins a large turbine, which drives a...

250

NREL: Concentrating Solar Power Research - Research Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Staff Here you'll find contact information for NREL's concentrating solar power research team and staff. To learn more about us and our expertise, read the staff's...

251

Test results of early photovoltaic concentrating collectors  

SciTech Connect

Several passively and actively cooled photovoltaic concentrating collectors built during the period 1976 to 1979 have been tested. The tests provide information on the performance characteristics of these collectors. The results of the tests are summarized.

Gerwin, H.J.; Pritchard, D.A.

1981-11-01T23:59:59.000Z

252

Spectral converters and luminescent solar concentrators  

E-Print Network (OSTI)

In this paper we present a comprehensive theoretical description of molecular spectral converters in the specific context of Luminescent Solar Concentrators (LSCs). The theoretical model is an extension to a three-level system interacting with a solar radiation bath of the standard quantum theory of atomic radiative processes. We derive the equilibrium equations of the conversion process and provide specific examples of application of this principle to the development of solar concentration devices.

Petra F. Scudo; Luigi Abbondanza; Roberto Fusco

2009-07-21T23:59:59.000Z

253

Spectral converters and luminescent solar concentrators  

E-Print Network (OSTI)

In this paper we present a comprehensive theoretical description of molecular spectral converters in the specific context of Luminescent Solar Concentrators (LSCs). The theoretical model is an extension to a three-level system interacting with a solar radiation bath of the standard quantum theory of atomic radiative processes. We derive the equilibrium equations of the conversion process and provide specific examples of application of this principle to the development of solar concentration devices.

Scudo, Petra F; Fusco, Roberto

2009-01-01T23:59:59.000Z

254

NREL: Concentrating Solar Power Research Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

A collage of Concentrating Solar Power photographs. The first photo shows a dish-engine solar system. The second is of a SAIC Stirling dish collector. And the third photo shows a SkyTrough solar concentrator located on a mesa top. A collage of Concentrating Solar Power photographs. The first photo shows a dish-engine solar system. The second is of a SAIC Stirling dish collector. And the third photo shows a SkyTrough solar concentrator located on a mesa top. NREL collaborates with industry to further the research and development (R&D) of concentrating solar power (CSP) plant and solar thermal technologies. NREL's projects in concentrating solar power focus on components R&D and systems analysis related to power tower and parabolic trough technologies: Collectors Receivers Power block Thermal energy storage Analysis. In addition, NREL has received funding through the following competitively awarded projects: 10-megawatt supercritical carbon dioxide (s-CO2) turbine test Near-blackbody, enclosed-particle receiver integrated with a

255

A correlation between soil descriptions and {sup 226}Ra concentrations in Florida soils  

Science Conference Proceedings (OSTI)

The soil radium content in Florida is highly variable. The range in radium concentrations, where the samples involved in this study are concerned, is from 0.1 pCi/g to 18.5 pCi/g. Low {sup 226}Ra concentrations (0.1 to 5 pCi/g) are evidenced in sands, moderate concentrations (5 to 11 pCi/g) are found in silt and gravel, and high {sup 226}Ra concentrations (>11 pCi/g) are found in soil horizons with shell, clay, and strata with phosphate. Strata containing phosphate yields a high concentration of {sup 226}Ra. The information obtained in this study, soil descriptions with their corresponding {sup 226}Ra concentrations, comes from geological cores drilled by geotechnical consultants with gamma spectrometry analysis performed by high resolution gamma spectroscopy. Concentration; of {sup 226}Ra generally increase with depth. These cores are usually terminated at 20 feet deep, with some cores being shallower than this due to hitting bedrock or encountering the water table. These frequency distributions give the core-logging geologist an approximate concentration of {sup 226}Ra based on the description of the soil. Since the correlation of {sup 226}Ra and soil descriptions can be used as a tool in assigning indoor radon potential, this study is of importance to land managers, contractors, developers, and regulating agencies who are attempting to place standards on tracts of land with {sup 226}Ra concentration used as a criterion.

Harrison, D.P.

1992-12-31T23:59:59.000Z

256

Energy Basics: Dish/Engine Systems for Concentrating Solar Power  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

power plant. Solar Concentrator The solar concentrator, or dish, gathers the solar energy coming directly from the sun. The resulting beam of concentrated sunlight is reflected...

257

Concentration of perrhenate and pertechnetate solutions  

DOE Green Energy (OSTI)

A method of preparing a concentrated solution of a carrier-free radioisotope which includes the steps of: a. providing a generator column loaded with a composition containing a parent radioisotope; b. eluting the generator column with an eluent solution which includes a salt of a weak acid to elute a target daughter radioisotope from the generator column in a first eluate. c. eluting a cation-exchange column with the first eluate to exchange cations of the salt for hydrogen ions and to elute the target daughter radioisotope and a weak acid in a second eluate; d. eluting an anion-exchange column with the second eluate to trap and concentrate the target daughter radioisotope and to elute the weak acid solution therefrom; and e. eluting the concentrated target daughter radioisotope from the anion-exchange column with a saline solution.

Knapp, Furn F. (Oak Ridge, TN); Beets, Arnold L. (Clinton, TN); Mirzadeh, Saed (Knoxville, TN); Guhlke, Stefan (Bonn, DE)

1998-01-01T23:59:59.000Z

258

Low-Cost, Lightweight Solar Concentrators  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrators Concentrators California Institute of Technology/Jet Propulsion Laboratory Award Number:0595-1612 | April 18, 2013 | Ganapathi * Mirror module development has been approached with the goal of being applicable to all types of CSP systems * Several heliostat design options being considered to address driving requirements: * Facets that are compliant to winds > 35 mph * Deep structures for optimizing structural efficiency * Pointing accuracy achieved with mechanism design * Simple precision components * Easy on-site assembly with pre-fab components * Structural foam properties and strengthening trades being conducted to reduce overall costs with FEM models Goal: Typical costs for a concentrator (heliostat or parabolic dish) can range between 40-50% of the total costs. To meet SunShot

259

concentrating solar power | OpenEI  

Open Energy Info (EERE)

concentrating solar power concentrating solar power Dataset Summary Description This dataset is part of a larger internal dataset at the National Renewable Energy Laboratory (NREL) that explores various characteristics of large solar electric (both PV and CSP) facilities around the United States. This dataset focuses on the land use characteristics for solar facilities that are either under construction or currently in operation. Source Land-Use Requirements for Solar Power Plants in the United States Date Released June 25th, 2013 (7 months ago) Date Updated Unknown Keywords acres area average concentrating solar power csp Density electric hectares km2 land land requirements land use land-use mean photovoltaic photovoltaics PV solar statistics Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon Master Solar Land Use Spreadsheet (xlsx, 1.5 MiB)

260

Spectroscopic detection of nitrogen concentrations in sagebrush  

SciTech Connect

The ability to estimate foliar nitrogen (N) in semi-arid landscapes can yield information on nutritional status and improve our limited understanding of controls on canopy photosynthesis. We examined two spectroscopic methods for estimating sagebrush dried leaf and live shrub N content: first derivative reflectance (FDR) and continuum removal. Both methods used partial least squares (PLS) regression to select wavebands most significantly correlated with N concentrations in the samples. Sagebrush dried leaf spectra produced PLS models (R2 = 0.76–0.86) that could predict N concentrations within the dataset more accurately than PLS models generated from live shrub spectra (R2 = 0.41–0.63). Inclusion of wavelengths associated with leaf water in the FDR transformations appeared to improve regression results. Findings are encouraging and warrant further exploration into sagebrush reflectance spectra to characterize N concentrations.

J. J. MITCHELL; N. F. GLENN; T.T. SANKEY; D. R. DERRYBERRY; R. C. HRUSKA; M. O. Anderson

2012-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Concentration and purification of plutonium or thorium  

DOE Patents (OSTI)

In this invention a first solution obtained from such as a plutonium/thorium purification process or the like, containing plutonium (Pu) and/or thorium (Th) in such as a low nitric acid (HNO.sub.3) concentration may have the Pu and/or Th separated and concentrated by passing an electrical current from a first solution having disposed therein an anode to a second solution having disposed therein a cathode and separated from the first solution by a cation permeable membrane, the Pu or Th cation permeating the cation membrane and forming an anionic complex within the second solution, and electrical current passage affecting the complex formed to permeate an anion membrane separating the second solution from an adjoining third solution containing disposed therein an anode, thereby effecting separation and concentration of the Pu and/or Th in the third solution.

Hayden, John A. (Arvada, CO); Plock, Carl E. (Golden, CO)

1976-01-01T23:59:59.000Z

262

Design package for concentrating solar collector panels  

DOE Green Energy (OSTI)

Information used to evaluate the design of the Northrup concentrating collector is presented. Included are the system performance specifications, the applications manual, and the detailed design drawings of the collector. The Northrup concentrating solar collector is a water/glycol/working fluid type, dipped galvanized steel housing, transparent acrylic Fresnel lens cover, copper absorber tube, fiber glass insulation and weighs 98 pounds. The gross collector area is about 29.4/sup 2/ per collector. A collector assembly includes four collector units within a tracking mount array.

Not Available

1978-08-01T23:59:59.000Z

263

Installation package for concentrating solar collector panels  

DOE Green Energy (OSTI)

Northrup, Inc., has developed and delivered 300 square feet of Concentrating Solar Collector (ML Series) and Attitude Control System, under the direction of the National Aeronautics and Space Administration. The ''ML Series'' Solar Collector Panels comprise a complete package array consisting of collector panels using modified Fresnel Prismatic Lenses for a 10 to 1 concentrating ration, supporting framework, fluid manifolding and tracking drive system, in unassembled components for field erection. The Installation, Operation and Maintenance Manual, Warranty, List of Materials, Sub-Assembly drawings and Final Field Assembly Drawings are included in the package.

Not Available

1978-08-01T23:59:59.000Z

264

Assessment of methods for hydrogen production using concentrated solar energy  

DOE Green Energy (OSTI)

The purpose of this work was to assess methods for hydrogen production using concentrated solar energy. The results of this work can be used to guide future work in the application of concentrated solar energy to hydrogen production. Specifically, the objectives were to: (1) determine the cost of hydrogen produced from methods that use concentrated solar thermal energy, (2) compare these costs to those of hydrogen produced by electrolysis using photovoltaics and wind energy as the electricity source. This project had the following scope of work: (1) perform cost analysis on ambient temperature electrolysis using the 10 MWe dish-Stirling and 200 MWe power tower technologies; for each technology, sue two cases for projected costs, years 2010 and 2020 the dish-Stirling system, years 2010 and 2020 for the power tower, (2) perform cost analysis on high temperature electrolysis using the 200 MWe power tower technology and projected costs for the year 2020, and (3) identify and describe the key technical issues for high temperature thermal dissociation and the thermochemical cycles.

Glatzmaier, G. [Peak Design, Evergreen, CO (United States); Blake, D. [National Renewable Energy Lab., Golden, CO (United States); Showalter, S. [Sandia National Lab., Albuquerque, NM (United States)

1998-01-01T23:59:59.000Z

265

High Speed Particle Image Velocimetry  

This patent application discloses a novel method to simultaneously track the motion of high numbers of object images under extreme, high concen-tration conditions. Although the software is designed to simultaneously track large numbers of particle ...

266

Low chemical concentrating steam generating cycle  

DOE Patents (OSTI)

A steam cycle for a nuclear power plant having two optional modes of operation. A once-through mode of operation uses direct feed of coolant water to an evaporator avoiding excessive chemical concentration buildup. A recirculation mode of operation uses a recirculation loop to direct a portion of flow from the evaporator back through the evaporator to effectively increase evaporator flow.

Mangus, James D. (Greensburg, PA)

1983-01-01T23:59:59.000Z

267

Western North Pacific Typhoons with Concentric Eyewalls  

Science Conference Proceedings (OSTI)

This study examines the intensity change and moat dynamics of typhoons with concentric eyewalls using passive microwave data and best-track data in the western North Pacific between 1997 and 2006. Of the 225 typhoons examined, 55 typhoons and 62 ...

Hung-Chi Kuo; Chih-Pei Chang; Yi-Ting Yang; Hau-Jang Jiang

2009-11-01T23:59:59.000Z

268

Optical modelling of square solar concentrator  

Science Conference Proceedings (OSTI)

This paper deals with the optical design of a photovoltaic solar concentrator composed by two squared reflection mirrors. The optical configuration of the device, is based on the Cassegrain telescope and designed in order to maximize the fill factor ... Keywords: photovoltaic, ray tracing, solar cell

Maurizio Carlini; Carlo Cattani; Andrea O. M. Tucci

2007-06-01T23:59:59.000Z

269

HELIOS: a computational model for solar concentrators  

DOE Green Energy (OSTI)

HELIOS is a computer code for mathematically simulating the behavior of the flux pattern from the concentrator field for a solar central receiver power station. Statistical methods are used to incorporate nondeterministic factors. The code is described, and some examples of its output are given.

Biggs, F.; Vittitoe, C.N.

1977-01-01T23:59:59.000Z

270

Nonimaging light concentrator with uniform irradiance  

DOE Patents (OSTI)

A nonimaging light concentrator system including a primary collector of light, an optical mixer disposed near the focal zone for collecting light from the primary collector, the optical mixer having a transparent entrance aperture, an internally reflective housing for substantially total internal reflection of light, a transparent exit aperture and an array of photovoltaic cells disposed near the transparent exit aperture.

Winston, Roland (Chicago, IL); Gee, Randy C. (Arvada, CO)

2003-04-01T23:59:59.000Z

271

Development of low cost concentrating solar collectors. Final report  

DOE Green Energy (OSTI)

A low cost concentrating collector has been developed that has the following features: (1) Material cost per 4 foot by 8 foot panel of $175 or $225 at retail prices depending on which of the two versions are used. (2) Low weight of 159 pounds per panel when liquid-filled or approximately 5 pounds per square foot to result in minor additional roof stress. (3) A concentration factor of 1.72 to reduce the necessary storage volume for winter heating and obtain adequate temperature for future air conditioning.(4) High efficiency when mounted parallel to the roof to reduce wind damage, roof stresses, and blend better with architectural features of a house.

Batzer, D.

1982-01-31T23:59:59.000Z

272

Correlations in Characteristic Data of Concentrator Photovoltaics (Poster)  

SciTech Connect

This study is motivated by a reported 1-2% infant mortality rate in concentrator photovoltaic cell assemblies. Approximately 650 bare III-V multi-junction PV cells were initially characterized via electroluminescence imaging and both light and dark current-voltage responses were recorded. The cells were then packaged into receivers and their IV response again evaluated both before and after an outdoor high concentration exposure of at least four hours above 750 DNI. Correlations exist between the initial dark IV characteristic and artifacts found in the EL image. Initial results also suggest that artifacts observed in the bare cell may serve as an indicator for early on-sun degradation, though may not be able to predict the infant mortality population.

Sweet, C.; Bosco, N.; Kurtz, S.

2011-02-01T23:59:59.000Z

273

Alpha Solarco`s Photovoltaic Concentrator Development program  

DOE Green Energy (OSTI)

This report details the work done under Sandia`s Photovoltaic Concentrator Development contract, funded jointly by Alpha Solarco and the US Department of Energy. It discusses improvements made to the cell assembly and module design of Alpha Solarco`s point-focus, high-concentration photovoltaic module. The goals of this effort were to increase the module efficiency, reduce the manufacturing cost of the cell assembly, and increase product reliability. Redesign of the secondary optical element achieved a 4 percent increase in efficiency due to better cell fill factors and offtrack performance. New, lower cost materials were identified for the secondary optical element, the optical couple between the secondary optical element and the cell, and the cell assembly electrical insulator. Manufacturing process improvements and test equipment are also discussed.

Anderson, A.; Bailor, B.; Carroll, D. [Alpha Solarco, Inc., Phoenix, AZ (United States)] [and others

1995-10-01T23:59:59.000Z

274

International Conference on Solar Concentrators for the Generation of Electricity or Hydrogen: Book of Abstracts  

DOE Green Energy (OSTI)

The International Conference on Solar Concentrators for the Generation of Electricity or Hydrogen provides an opportunity to learn about current significant research on solar concentrators for generating electricity or hydrogen. The conference will emphasize in-depth technical discussions of recent achievements in technologies that convert concentrated solar radiation to electricity or hydrogen, with primary emphasis on photovoltaic (PV) technologies. Very high-efficiency solar cells--above 37%--were recently developed, and are now widely used for powering satellites. This development demands that we take a fresh look at the potential of solar concentrators for generating low-cost electricity or hydrogen. Solar electric concentrators could dramatically overtake other PV technologies in the electric utility marketplace because of the low capital cost of concentrator manufacturing facilities and the larger module size of concentrators. Concentrating solar energy also has advantages for th e solar generation of hydrogen. Around the world, researchers and engineers are developing solar concentrator technologies for entry into the electricity generation market and several have explored the use of concentrators for hydrogen production. The last conference on the subject of solar electric concentrators was held in November of 2003 and proved to be an important opportunity for researchers and developers to share new and crucial information that is helping to stimulate projects in their countries.

McConnell, R.; Symko-Davies, M.; Hayden, H.

2005-05-01T23:59:59.000Z

275

Reduction of intensity variations on the absorbers of ideal flux concentrators  

SciTech Connect

Although ideal concentrators such as the compound parabolic concentrator have the property that concentrated flux is uniformly distributed on the absorber when the angular acceptance is filled by the incident flux, the instantaneous flux distribution may be very nonuniform when illuminated by a point source. These nonuniformities may be reduced by texturing the surface with small distortions. The necessary reduction of concentrator throughput is small enough to allow such texture concentrators to accommodate a wide range of tolerances in concentrator efficiency and uniformity of the flux distribution. In particular, the suitability of such concentrators for some space applications is discussed. Results of measurements on a test model are presented that demonstrate the effective reduction of flux nonuniformities by reflectors that have been textured by a simple process. Two-stage concentrators for attaining high concentration ratios are shown to distribute the concentrated flux fairly uniformly across the absorber when illuminated by point sources within the field of view. Again the remaining nonuniformities may be removed by texturing the reflecting surfaces (entailing some reduction in concentrator efficiency).

Greenman, P.

1980-08-15T23:59:59.000Z

276

An Examination of Ice Nucleus Concentrations in Eastern New York State  

Science Conference Proceedings (OSTI)

This work reports the results from a five-station (remote to highly urbanized) sampling network operated in 1976 in eastern New York State in which daily measurements were made of ice nucleus and condensation nucleus concentrations among the ...

John Zamurs; James E. Jiusto

1982-03-01T23:59:59.000Z

277

NREL: Concentrating Solar Power Research - Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnerships Partnerships NREL maintains partnerships to advance concentrating solar power research, development, and deployment efforts. Currently, NREL works with Sandia National Laboratories in Albuquerque, New Mexico, through SunLab-a partnership developed by the U.S. Department of Energy to administer its concentrating solar power R&D and analysis activities. SolarPACES Solar Power and Chemical Energy Systems (SolarPACES), an international program of the International Energy Agency, furthers collaborative development, testing, and marketing of CSP plants. NREL represents the U.S. activities and serves on various committees in SolarPACES, which now has 13 members: Algeria, Australia, Egypt, the European Commission, France, Germany, Israel, Mexico, South Africa, South Korea, Spain, Switzerland, and

278

NREL: Concentrating Solar Power Research - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects Projects NREL's concentrating solar power (CSP) projects focus on components R&D and systems analysis related to power tower and parabolic trough technologies. We support the U.S. Department of Energy (DOE) in its CSP deployment efforts in the following areas: Collectors Receivers Power block Thermal energy storage Analysis. NREL received funding from DOE for concentrating solar power research projects. Through a competitive process, NREL was selected to lead the following projects: Novel Components to Overcome Existing Barriers-Particle Receiver Integrated with a Fluidized Bed Thermodynamic Cycle to Revolutionize CSP Systems-10-Megawatt Supercritical Carbon Dioxide (s-CO2) Turbine Test Nanomaterials for thermal energy storage in CSP plants In addition to these efforts, NREL is also a key partner on two other

279

ORIGINAL ARTICLE Radionuclide Concentrations in Benthic Invertebrates  

Office of Legacy Management (LM)

Environ Monit Assess (2007) 128:329-341 Environ Monit Assess (2007) 128:329-341 DO1 10.1007/~10661-006-93 I 6 4 ORIGINAL ARTICLE - Radionuclide Concentrations in Benthic Invertebrates from Amchitka and Kiska Islands in the Aleutian Chain, Alaska Joanna Burger Michael Gochfeld Stephen C. Jewett Received: 8 March 2006 /Accepted: 8 May 2006 1 Published online: 21 October 2006 0 Springer Science + Business Media B.V. 2006 Abstract Concentrations of 13 radionuclides 1291, 60co, 1 5 2 ~ ~ , 9 0 s r , 9 9 ~ ~ , 2 4 1 ~ ~ , 238pu, 239249pu, 2 3 4 ~ , 2 3 5 ~ , 236U, 2 3 8 ~ were examined in seven species of invertebrates from Amchitka and Kiska Islands, in the Aleutian Chain of Alaska, using gamma spectroscopy, inductively coupled plasma mass spectroscopy, and alpha spectroscopy. Amchitka Island was the site of three underground nuclear test

280

Thermal regeneration of an electrochemical concentration cell  

DOE Patents (OSTI)

A system and method are described for thermally regenerating an electrochemical concentration cell having first and second aluminum electrodes respectively positioned in contact with first and second electrolytes separated by an ion exchange member, the first and second electrolytes being composed of different concentrations of an ionic solvent and a salt, preferably an aluminum halide. The ionic solvent may be either organic or inorganic with a relatively low melting point, the ionic solvent and the salt form a complex wherein the free energy of formation of said complex is less than about -5 kcal/mole. A distillation column using solar heat or low grade industrial waste heat receives the first and second electrolytes and thermally decomposes the salt-solvent complex to provide feed material for the two half cells.

Krumpelt, M.; Bates, J.K.

1980-05-09T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Concentrating Solar Power: Energy from Mirrors  

NLE Websites -- All DOE Office Websites (Extended Search)

Mirror mirror on the wall, what's the Mirror mirror on the wall, what's the greatest energy source of all? The sun. Enough energy from the sun falls on the Earth everyday to power our homes and businesses for almost 30 years. Yet we've only just begun to tap its potential. You may have heard about solar electric power to light homes or solar thermal power used to heat water, but did you know there is such a thing as solar thermal-electric power? Electric utility companies are using mirrors to concentrate heat from the sun to produce environmentally friendly electricity for cities, especially in the southwestern United States. The southwestern United States is focus- ing on concentrating solar energy because it's one of the world's best areas for sun- light. The Southwest receives up to twice the sunlight as other regions in the coun-

282

Solar concentrator with restricted exit angles  

DOE Patents (OSTI)

A device is provided for the collection and concentration of radiant energy and includes at least one reflective side wall. The wall directs incident radiant energy to the exit aperture thereof or onto the surface of energy absorber positioned at the exit aperture so that the angle of incidence of radiant energy at the exit aperture or on the surface of the energy absorber is restricted to desired values.

Rabl, Arnulf (Downers Grove, IL); Winston, Roland (Chicago, IL)

1978-12-19T23:59:59.000Z

283

Efficiency of luminescence in luminescent solar concentrators  

Science Conference Proceedings (OSTI)

The power effiency of luminescence excited by solar radiation in luminescent solar collectors is calculated for a glass sheet doped with CR/sup 3 +/. The achievable chemical potential for an optically thick absorber irradiated by diluted blackbody radiation as a function of Cr/sup 3 +/ concentration, sheet thickness, sunlight dilution, and luminescence quantum yield leads directly to overall conversion efficiency of solar power to luminescence power.

Lempicki, A.

1983-04-15T23:59:59.000Z

284

Paper: Safeguards design for a plutonium concentrator  

Science Conference Proceedings (OSTI)

In this paper we consider the design of a nonlinear estimator to be used in conjunction with on-line detectors for a plutonium nitrate concentrator. Using a complex state-of-the-art process model to simulate 'realistic' data, we show that the estimator ... Keywords: (diversion detection), (nuclear safeguards), Kalman filter, decision theory, nonlinear filtering, nuclear plants, on-line operation, optimal filtering, state estimation

J. V. Candy; R. B. Rozsa

1980-11-01T23:59:59.000Z

285

Development of a prototype lignin concentration sensor  

DOE Green Energy (OSTI)

The US Department of Energy, Office of Industrial Technologies, is sponsoring a research and development program for the development of a real-time, in-situ sensor to measure the concentration of lignin in wood pulp. The program is composed of phase I showing feasibility which is now complete, phase II for development and testing of a Field Prototype, in progress, Phase III commercialization. Phase I work (funded entirely by B&W) demonstrated a correlation between the fluorescence intensity and lignin concentration (as measured by TAPPI procedure, T 236 hm-85 Kappa Number of Pulp) for undiluted wood pulp samples. In Phase II, a laboratory test program directed at characterizing the fluorescence of wood pulp has been conducted as a prelude to the design of a prototype sensor. The current report summarizes the testing completed in Phase I and documents the Phase II laboratory testing completed through December 1991. Future Phase II efforts include additional laboratory testing, design and fabrication of a prototype sensor, and field testing of the prototype sensor. Phase III of the program will concentrate on the incorporation of the sensor into a control system and commercialization of the sensor.

Malito, M.L.; Jeffers, L.A.

1993-01-01T23:59:59.000Z

286

Development of a prototype lignin concentration sensor  

DOE Green Energy (OSTI)

The US Department of Energy, Office of Industrial Technologies, is sponsoring a research and development program for the development of a real-time, in-situ sensor to measure the concentration of lignin in wood pulp. The program is composed of phase I showing feasibility which is now complete, phase II for development and testing of a Field Prototype, in progress, Phase III commercialization. Phase I work (funded entirely by B W) demonstrated a correlation between the fluorescence intensity and lignin concentration (as measured by TAPPI procedure, T 236 hm-85 Kappa Number of Pulp) for undiluted wood pulp samples. In Phase II, a laboratory test program directed at characterizing the fluorescence of wood pulp has been conducted as a prelude to the design of a prototype sensor. The current report summarizes the testing completed in Phase I and documents the Phase II laboratory testing completed through December 1991. Future Phase II efforts include additional laboratory testing, design and fabrication of a prototype sensor, and field testing of the prototype sensor. Phase III of the program will concentrate on the incorporation of the sensor into a control system and commercialization of the sensor.

Malito, M.L.; Jeffers, L.A.

1993-01-01T23:59:59.000Z

287

Industrial solar breeder project using concentrator photovoltaics  

DOE Green Energy (OSTI)

The purpose of this program is to demonstrate the use of a concentrating photovoltaic system to provide the energy for operating a silicon solar cell production facility, i.e., to demonstrate a solar breeder. Solarex has proposed to conduct the first real test of the solar breeder concept by building and operating a 200 kW(e) (peak) concentrating photovoltaic system based on the prototype and system design developed during Phase I. This system will provide all of the electrical and thermal energy required to operate a solar cell production line. This demonstration would be conducted at the Solarex Rockville facility, with the photovoltaic array located over the company parking lot and on an otherwise unusable flood plain. Phase I of this program included a comprehensive analysis of the application, prototype fabrication and evaluation, system design and specification, and a detailed plan for Phases II and III. A number of prototype tracking concentrator solar collectors were constructed and operated. Extensive system analysis was performed to design the Phase II system as a stand-alone power supply for a solar cell production line. Finally, a detailed system fabrication proposal for Phase II and an operation and evaluation plan for Phase III were completed. These proposals included technical, management, and cost plans for the fabrication and exercise of the proposed system.

Hamilton, R.; Wohlgemuth, J.; Burkholder, J.; Levine, A.; Storti, G.; Wrigley, C.; McKegg, A.

1979-08-01T23:59:59.000Z

288

Total Dissolved Methylmercury Concentrations in Two Headwater Streams  

Science Conference Proceedings (OSTI)

Methylmercury (MeHg) is the only form of mercury whose concentrations increase with trophic level in aquatic food webs. As a consequence, a direct causal link exists between the levels of MeHg dissolved in water, where it typically accounts for only 10% of the total mercury, and in fish tissues, where it typically accounts for more than 90% of the total mercury. This link makes dissolved MeHg a critical indicator of an ecosystempotential to attain high fish mercury levels and makes its accurate measureme...

2009-11-20T23:59:59.000Z

289

Durability of Polymeric Encapsulation Materials for Concentrating Photovoltaic Systems (Poster)  

DOE Green Energy (OSTI)

Polymeric encapsulation materials are typically used in concentrating photovoltaic (CPV) modules to protect the cell from the field environment. Because it is physically located adjacent to the cell, the encapsulation is exposed to a high optical flux, often including light in the ultraviolet (UV) and infrared (IR) wavelengths. The durability of encapsulants used in CPV modules is critical to the technology, but is presently not well understood. This work seeks to identify the appropriate material types, field-induced failure mechanisms, and factors of influence (if possible) of polymeric encapsulation. These results will ultimately be weighed against those of future qualification and accelerated life test procedures.

Miller, D. C.; Kempe, M. D.; Araki, K.; Kennedy, C. E.; Kurtz, S. R.

2011-02-01T23:59:59.000Z

290

Orientational order in concentrated suspensions of spherical microswimmers  

E-Print Network (OSTI)

We use numerical simulations to probe the dynamics of concentrated suspensions of spherical microswimmers interacting hydrodynamically. Previous work in the dilute limit predicted orientational instabilities of aligned suspensions for both pusher and puller swimmers, which we confirm computationally. Unlike previous work, we show that isotropic suspensions of spherical swimmers are also always unstable. Both types of initial conditions develop long-time polar order, of a nature which depends on the hydrodynamic signature of the swimmer but very weakly on the volume fraction up to very high volume fractions.

Arthur A. Evans; Takuji Ishikawa; Takami Yamaguchi; Eric Lauga

2013-02-10T23:59:59.000Z

291

A modified concentrating type solar oven for outdoor cooking  

Science Conference Proceedings (OSTI)

Solar cookers offer a partial solution to many problems for the poor developing areas of the world. In these regions energy used for cooking sometimes comprises four fifths of the total energy demand. Solar cookers are generally four catagories: direct focusing, oven, ovenfocusing and indirect types. The direct focusing types failed to boil water under windy conditions due to excessive convection losses from the bare cooking pot placed at the concentrator focus. The oven type cookers, such as Telkes oven, observe the rules of energy conservation and thus are more efficient and less affected by windy weather. However, this oven suffers from two major problems. First, tilting the oven could cause food spillage unless a hinged support is used for the pot. This adds complication to the design of Telkes oven. Second, the solar radiation is added to the pot from the top for high solar altitude angles. This leads to poor heat transfer to the food inside the pot. The advantages of concentrating and oven cookers can be obtained by widding of a point focus concentrator to a new oven type receiver. In this paper the concept and design details of such an oven are introduced. Theoretical and experimental analyses of the developed cooker are given.

Khalifa, A.M.A.

1983-12-01T23:59:59.000Z

292

SunShot Initiative: National Laboratory Concentrating Solar Power Research  

NLE Websites -- All DOE Office Websites (Extended Search)

National Laboratory Concentrating National Laboratory Concentrating Solar Power Research to someone by E-mail Share SunShot Initiative: National Laboratory Concentrating Solar Power Research on Facebook Tweet about SunShot Initiative: National Laboratory Concentrating Solar Power Research on Twitter Bookmark SunShot Initiative: National Laboratory Concentrating Solar Power Research on Google Bookmark SunShot Initiative: National Laboratory Concentrating Solar Power Research on Delicious Rank SunShot Initiative: National Laboratory Concentrating Solar Power Research on Digg Find More places to share SunShot Initiative: National Laboratory Concentrating Solar Power Research on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage

293

High flux solar energy transformation  

DOE Patents (OSTI)

Disclosed are multi-stage systems for high flux transformation of solar energy allowing for uniform solar intensification by a factor of 60,000 suns or more. Preferred systems employ a focusing mirror as a primary concentrative device and a non-imaging concentrator as a secondary concentrative device with concentrative capacities of primary and secondary stages selected to provide for net solar flux intensification of greater than 2000 over 95 percent of the concentration area. Systems of the invention are readily applied as energy sources for laser pumping and in other photothermal energy utilization processes. 7 figures.

Winston, R.; Gleckman, P.L.; O' Gallagher, J.J.

1991-04-09T23:59:59.000Z

294

High flux solar energy transformation  

DOE Patents (OSTI)

Disclosed are multi-stage systems for high flux transformation of solar energy allowing for uniform solar intensification by a factor of 60,000 suns or more. Preferred systems employ a focusing mirror as a primary concentrative device and a non-imaging concentrator as a secondary concentrative device with concentrative capacities of primary and secondary stages selected to provide for net solar flux intensification of greater than 2000 over 95 percent of the concentration area. Systems of the invention are readily applied as energy sources for laser pumping and in other photothermal energy utilization processes.

Winston, Roland (Chicago, IL); Gleckman, Philip L. (Chicago, IL); O' Gallagher, Joseph J. (Flossmoor, IL)

1991-04-09T23:59:59.000Z

295

THERMOCHEMICAL HEAT STORAGE FOR CONCENTRATED SOLAR POWER  

SciTech Connect

Thermal energy storage (TES) is an integral part of a concentrated solar power (CSP) system. It enables plant operators to generate electricity beyond on sun hours and supply power to the grid to meet peak demand. Current CSP sensible heat storage systems employ molten salts as both the heat transfer fluid and the heat storage media. These systems have an upper operating temperature limit of around 400 C. Future TES systems are expected to operate at temperatures between 600 C to 1000 C for higher thermal efficiencies which should result in lower electricity cost. To meet future operating temperature and electricity cost requirements, a TES concept utilizing thermochemical cycles (TCs) based on multivalent solid oxides was proposed. The system employs a pair of reduction and oxidation (REDOX) reactions to store and release heat. In the storage step, hot air from the solar receiver is used to reduce the oxidation state of an oxide cation, e.g. Fe3+ to Fe2+. Heat energy is thus stored as chemical bonds and the oxide is charged. To discharge the stored energy, the reduced oxide is re-oxidized in air and heat is released. Air is used as both the heat transfer fluid and reactant and no storage of fluid is needed. This project investigated the engineering and economic feasibility of this proposed TES concept. The DOE storage cost and LCOE targets are $15/kWh and $0.09/kWh respectively. Sixteen pure oxide cycles were identified through thermodynamic calculations and literature information. Data showed the kinetics of re-oxidation of the various oxides to be a key barrier to implementing the proposed concept. A down selection was carried out based on operating temperature, materials costs and preliminary laboratory measurements. Cobalt oxide, manganese oxide and barium oxide were selected for developmental studies to improve their REDOX reaction kinetics. A novel approach utilizing mixed oxides to improve the REDOX kinetics of the selected oxides was proposed. It partially replaces some of the primary oxide cations with selected secondary cations. This causes a lattice charge imbalance and increases the anion vacancy density. Such vacancies enhance the ionic mass transport and lead to faster re-oxidation. Reoxidation fractions of Mn3O4 to Mn2O3 and CoO to Co3O4 were improved by up to 16 fold through the addition of a secondary oxide. However, no improvement was obtained in barium based mixed oxides. In addition to enhancing the short term re-oxidation kinetics, it was found that the use of mixed oxides also help to stabilize or even improve the TES properties after long term thermal cycling. Part of this improvement could be attributed to a reduced grain size in the mixed oxides. Based on the measurement results, manganese-iron, cobalt-aluminum and cobalt iron mixed oxides have been proposed for future engineering scale demonstration. Using the cobalt and manganese mixed oxides, we were able to demonstrate charge and discharge of the TES media in both a bench top fixed bed and a rotary kiln-moving bed reactor. Operations of the fixed bed configuration are straight forward but require a large mass flow rate and higher fluid temperature for charging. The rotary kiln makes direct solar irradiation possible and provides significantly better heat transfer, but designs to transport the TES oxide in and out of the reactor will need to be defined. The final reactor and system design will have to be based on the economics of the CSP plant. A materials compatibility study was also conducted and it identified Inconel 625 as a suitable high temperature engineering material to construct a reactor holding either cobalt or manganese mixed oxides. To assess the economics of such a CSP plant, a packed bed reactor model was established as a baseline. Measured cobalt-aluminum oxide reaction kinetics were applied to the model and the influences of bed properties and process parameters on the overall system design were investigated. The optimal TES system design was found to be a network of eight fixed bed reactors at 18.75 MWth each with charge and

PROJECT STAFF

2011-10-31T23:59:59.000Z

296

NREL: Concentrating Solar Power Research - News  

NLE Websites -- All DOE Office Websites (Extended Search)

News News Below are news stories related to NREL Concentrating Solar Power research. Subscribe to the RSS feed RSS . Learn about RSS. November 5, 2013 Solar Working Group Releases Standard Contracts A working group representing solar industry stakeholders has developed standard contracts that should help lower transaction costs and make it easier to access low-cost financing for residential and commercial solar power projects. October 24, 2013 NREL Researcher Honored with Hispanic STEM Award A national organization devoted to getting more Hispanics into the fields of science, technology, engineering, and math (STEM), has honored a scientist at the Energy Department's National Renewable Energy Laboratory (NREL) with its annual Outstanding Technical Achievement Award.

297

2009 Concentrating Photovoltaic Solar Technology Assessment  

Science Conference Proceedings (OSTI)

This report investigates manufacturers of concentrating photovoltaic (CPV) systems with a special emphasis on companies that may be ready to deploy one or more 50-MW systems by 2012. The report has three main sections: Detailed profiles of 10 companies that appear likely to be able to field utility-scale deployments by 2012 A market study and forecast for CPV over the period 2012–2020 An appendix, listing contacts and other information about the dozens of CPV vendors that were not included in the detail...

2010-04-13T23:59:59.000Z

298

Acoustic concentration of particles in fluid flow  

DOE Patents (OSTI)

An apparatus for acoustic concentration of particles in a fluid flow includes a substantially acoustically transparent membrane and a vibration generator that define a fluid flow path therebetween. The fluid flow path is in fluid communication with a fluid source and a fluid outlet and the vibration generator is disposed adjacent the fluid flow path and is capable of producing an acoustic field in the fluid flow path. The acoustic field produces at least one pressure minima in the fluid flow path at a predetermined location within the fluid flow path and forces predetermined particles in the fluid flow path to the at least one pressure minima.

Ward, Michael D. (Los Alamos, NM); Kaduchak, Gregory (Los Alamos, NM)

2010-11-23T23:59:59.000Z

299

Suspension Hydrogen Reduction of Iron Oxide Concentrates  

DOE Green Energy (OSTI)

The objective of the project is to develop a new ironmaking technology based on hydrogen and fine iron oxide concentrates in a suspension reduction process. The ultimate objective of the new technology is to replace the blast furnace and to drastically reduce CO2 emissions in the steel industry. The goals of this phase of development are; the performance of detailed material and energy balances, thermochemical and equilibrium calculations for sulfur and phosphorus impurities, the determination of the complete kinetics of hydrogen reduction and bench-scale testing of the suspension reduction process using a large laboratory flash reactor.

H.Y. Sohn

2008-03-31T23:59:59.000Z

300

Free-formed insulated concentrating solar collector. Final report  

DOE Green Energy (OSTI)

A free-formed, insulated solar concentrating-collector was designed, built, and tested. The design utilizes new concepts to achieve simplicity, low cost, high efficiency, and long service life. Three concepts were utilized to meet these goals: First, the concentrating reflector is free-formed by hand from a thin steel sheet. Second, a transparent cover is placed over the concentrator and insulation is placed on the back and ends reduce heat losses and protect the reflecting surface from attack by rain and dust. Third, a highly-reflective aluminum film, protected by bonding between two thin sheets of uv stabilized polyester, is fastened to the steel substrate by peelable adhesive. The material cost of the unit without sun seeking electronics and drive motor is about $6.75 per square foot of sun capturing area. Sun following equipment adds to the cost, however, in units of about 100 square feet sun following equipment contributes about $2.00 per square foot. Labor costs are estimated to be approximately $3.00 per square foot for a $5.00 per hour labor rate for a trained crew. On a do-it-yourself basis a 100 square foot unit would cost about $875. Tests of the prototype collector performed by a certified solar test laboratory were made and the results compared with similar tests of a commercial unit. These tests indicate that the efficiency of the prototype is higher than the commercial unit at outlet temperatures below 160/sup 0/F and comparable with the commercial unit at the boiling point of water.

Goodwin, G.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Dish/Engine Systems for Concentrating Solar Power | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DishEngine Systems for Concentrating Solar Power DishEngine Systems for Concentrating Solar Power August 20, 2013 - 5:02pm Addthis The dishengine system is a concentrating solar...

302

DISSOLVED CONCENTRATION LIMITS OF RADIOACTIVE ELEMENTS  

Science Conference Proceedings (OSTI)

The purpose of this study is to evaluate dissolved concentration limits (also referred to as solubility limits) of elements with radioactive isotopes under probable repository conditions, based on geochemical modeling calculations using geochemical modeling tools, thermodynamic databases, field measurements, and laboratory experiments. The scope of this modeling activity is to predict dissolved concentrations or solubility limits for 14 elements with radioactive isotopes (actinium, americium, carbon, cesium, iodine, lead, neptunium, plutonium, protactinium, radium, strontium, technetium, thorium, and uranium) important to calculated dose. Model outputs for uranium, plutonium, neptunium, thorium, americium, and protactinium are in the form of tabulated functions with pH and log (line integral) CO{sub 2} as independent variables, plus one or more uncertainty terms. The solubility limits for the remaining elements are either in the form of distributions or single values. The output data from this report are fundamental inputs for Total System Performance Assessment for the License Application (TSPA-LA) to determine the estimated release of these elements from waste packages and the engineered barrier system. Consistent modeling approaches and environmental conditions were used to develop solubility models for all of the actinides. These models cover broad ranges of environmental conditions so that they are applicable to both waste packages and the invert. Uncertainties from thermodynamic data, water chemistry, temperature variation, and activity coefficients have been quantified or otherwise addressed.

NA

2004-11-22T23:59:59.000Z

303

Black Carbon Concentrations and Diesel Vehicle Emission Factors...  

NLE Websites -- All DOE Office Websites (Extended Search)

Black Carbon Concentrations and Diesel Vehicle Emission Factors Derived from Coefficient of Haze Measurements in California: 1967-2003 Title Black Carbon Concentrations and Diesel...

304

Concentrating Solar Power: Best Practices Handbook for the Collection...  

Open Energy Info (EERE)

Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data Jump to: navigation, search Tool Summary Name: Concentrating Solar Power: Best...

305

The Measurement of the Moisture Concentration of Selected Test...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Measurement of the Moisture Concentration of Selected Test Model Ore Zones (April 1977) The Measurement of the Moisture Concentration of Selected Test Model Ore Zones (April...

306

Category:Concentrating Solar Power | Open Energy Information  

Open Energy Info (EERE)

Sign Up Search Category Edit History Facebook icon Twitter icon Category:Concentrating Solar Power Jump to: navigation, search This is the Concentrating Solar Power category....

307

Concentrations of fine, ultrafine, and black carbon particles...  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrations of fine, ultrafine, and black carbon particles in auto-rickshaws in New Delhi, India Title Concentrations of fine, ultrafine, and black carbon particles in...

308

Factors affecting the indoor concentrations of carbonaceous aerosols...  

NLE Websites -- All DOE Office Websites (Extended Search)

Factors affecting the indoor concentrations of carbonaceous aerosols of outdoor origin Title Factors affecting the indoor concentrations of carbonaceous aerosols of outdoor origin...

309

Formation of titanate nanostructures under different NaOH concentration and their application in wastewater treatment  

SciTech Connect

The effects of the concentration of NaOH on the formation and transformation of various titanate nanostructures were studied. With increasing NaOH concentration, three different formation mechanisms were proposed. Nanotubes can only be obtained under moderate NaOH conditions, and should transform into nanowires with prolonged hydrothermal treatment, and their formation rate is accelerated by increasing NaOH concentration. Low concentration of NaOH results in the direct formation of nanowires, while extra high concentration of NaOH leads to the formation of amorphous nanoparticles. Adsorption and photocatalysis studies show that titanate nanowires and nanotubes might be potential adsorbents for the removal of both heavy metal ions and dyes and photocatalysts for the removal of dyes from wastewater. -- Graphical abstract: The morphologies of the titanates depend deeply on the concentration of NaOH. With increasing NaOH concentration, three different formation mechanisms were proposed. The application of these titanate nanostructures in the wastewater treatment was studied. Display Omitted Research highlights: {yields} Effect of NaOH concentration on the structures of various titanates was reported. {yields} Three different formation mechanisms were presented with increasing NaOH concentration. {yields} Various titanates were used as adsorbents/photocatalysts in wastewater treatment.

Huang Jiquan [Key Lab of Optoelectronic Materials Chemistry and Physics, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002 (China); Graduate school of Chinese Academy of Sciences, Chinese Academy of Sciences, Beijing, 100049 (China); Cao Yongge, E-mail: caoyongge@fjirsm.ac.c [Key Lab of Optoelectronic Materials Chemistry and Physics, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002 (China); Deng Zhonghua; Tong Hao [Key Lab of Optoelectronic Materials Chemistry and Physics, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002 (China)

2011-03-15T23:59:59.000Z

310

Enclosed, off-axis solar concentrator  

SciTech Connect

A solar concentrator including a housing having receiving wall, a reflecting wall and at least two end walls, the receiving, reflecting and end walls defining a three-dimensional volume having an inlet, wherein a vertical axis of the housing is generally perpendicular to the inlet, a receiver mounted on the receiving wall of the housing, the receiver including at least one photovoltaic cell, wherein a vertical axis of the receiver is disposed at a non-zero angle relative to the vertical axis of the housing, at least one clip disposed on the reflecting wall an optical element received within the three-dimensional volume, the optical element including at least one tab, the tab being engaged by the clip to align the optical element with the receiver, and a window received over the inlet to enclose the housing.

Benitez, Pablo; Grip, Robert E; Minano, Juan C; Narayanan, Authi A; Plesniak, Adam; Schwartz, Joel A

2013-11-26T23:59:59.000Z

311

Concentrating Solar Power strategic plan summary  

SciTech Connect

A strategic plan for Concentrating Solar Power (CSP) -- A Bright Path to the Future -- was completed and released by the US Department of Energy`s Office of Solar Thermal, Biomass Power, and Hydrogen Technologies in December 1996. This strategic plan document will help bring CSP (formerly solar thermal electric) technologies to the marketplace over the course of the next 20 years (1996--2015) -- taking us from the current pre-competitive status closer to full commercialization. The plan, developed in concert with stakeholders, is a living document and will undergo periodic reevaluation as well as revision to reflect changes in the market environment, the progress of the technologies, and the development of new concepts and ideas.

1998-05-01T23:59:59.000Z

312

Development of Concentrating Solar Thermal Power  

E-Print Network (OSTI)

(Draft under Consideration by the World Bank) In May 2004, the World Bank submitted a status report on the GEF co-financed solar thermal portfolio to the GEF Council. In response to Council comments, the Bank subsequently commissioned an external assessment of the World Bank/GEF’s strategy for the market development of concentrating solar thermal power. The consultant was selected through a competitive procurement process, following World Bank procedures. The selected consortium, the Global Research Alliance, is led by CSIR-South Africa, and includes the Fraunhofer Institute for Systems and Innovation Research, Fraunhofer Institute for Solar Energy Systems, and CSIRO-Australia. The report’s findings and recommendations are now under consideration by the World Bank. Council Members are invited to comment on the report, by July 15, 2005.

Gef Council; Concentrating Solar; Thermal Power; Copied To Mr. Rohit Khanna; Senior Operations Officer; Steve Szewczuk; Csir South Africa; Thomas Engelmann; Michael Geyer; Juan Granados; Andreas Haeberle; Haeussermann Tewfik Hasni; David Kearney; Ludger Lorych; Thomas Mancini; Abdellah Mdarhri; Paul Nava; Joachim Nick-leptin; Hani El Nokrashy; Robert Pitz; Klaus-peter Pischke; Hank Price; Jürgen Ratzinger; Thomas Rueckert; David Saul; Franz Trieb; Christine Woerlen

2005-01-01T23:59:59.000Z

313

NREL: Concentrating Solar Power Research - Systems Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Analysis Systems Analysis Featured Resource Learn more about NREL's capabilities in modeling and analysis of CSP Systems. NREL and other national laboratories support U.S. Department of Energy (DOE) systems analysis activities to evaluate and validate the cost, performance, durability, and grid penetration impacts for concentrating solar power (CSP) technologies. DOE's systems analysis program focuses on the greatest opportunities for impact, based on estimates of the current and future costs of CSP plants, subsystems, and components. Opportunities and Potential Impact The DOE SunShot Initiative to reduce the installed cost of solar energy systems by 75% by the end of the decade will require low-cost configurations that are easy to integrate into the electric grid. Systems

314

Steam generation in compound parabolic concentrator collectors  

SciTech Connect

This report describes the advantages of generating steam directly in a nonimaging compound parabolic concentrator (CPC) collector rather than using a heat-transfer fluid and a secondary heat exchanger. The predicted performance advantages from generating steam directly in CPC collectors are significant, and that performance has ben verified using a collector built and tested at Argonne National Laboratory. The collector and the method used to test its operation in a steam-generating mode are described. Test results are included for a 6.4-m/sup 2/ array of evacuated tube collectors with an advanced absorber coating, silver reflectors, and tubes oriented in a north-south configuration. Also described are the test methods and results for indoor testing for heat loss by the collectors and outdoor testing of their instantaneous optical efficiency.

Allen, J.W.; Schertz, W.W.; Wantroba, A.S.

1985-08-01T23:59:59.000Z

315

Toxicity Data to Determine Refrigerant Concentration Limits  

SciTech Connect

This report reviews toxicity data, identifies sources for them, and presents resulting exposure limits for refrigerants for consideration by qualified parties in developing safety guides, standards, codes, and regulations. It outlines a method to calculate an acute toxicity exposure limit (ATEL) and from it a recommended refrigerant concentration limit (RCL) for emergency exposures. The report focuses on acute toxicity with particular attention to lethality, cardiac sensitization, anesthetic and central nervous system effects, and other escape-impairing effects. It addresses R-11, R-12, R-22, R-23, R-113, R-114, R-116, R-123, R-124, R-125, R-134, R-134a, R-E134, R-141b, R-142b, R-143a, R-152a, R-218, R-227ea, R-236fa, R-245ca, R-245fa, R-290, R-500, R-502, R-600a, R-717, and R-744. It summarizes additional data for R-14, R-115, R-170 (ethane), R-C318, R-600 (n-butane), and R-1270 (propylene) to enable calculation of limits for blends incorporating them. The report summarizes the data a nd related safety information, including classifications and flammability data. It also presents a series of tables with proposed ATEL and RCL concentrations-in dimensionless form and the latter also in both metric (SI) and inch-pound (IP) units of measure-for both the cited refrigerants and 66 zerotropic and azeotropic blends. They include common refrigerants, such as R-404A, R-407C, R-410A, and R-507A, as well as others in commercial or developmental status. Appendices provide profiles for the cited single-compound refrigerants and for R-500 and R-502 as well as narrative toxicity summaries for common refrigerants. The report includes an extensive set of references.

Calm, James M.

2000-09-30T23:59:59.000Z

316

DISSOLVED CONCENTRATION LIMITS OF RADIOACTIVE ELEMENTS  

Science Conference Proceedings (OSTI)

The purpose of this study is to evaluate dissolved concentration limits (also referred to as solubility limits) of elements with radioactive isotopes under probable repository conditions, based on geochemical modeling calculations using geochemical modeling tools, thermodynamic databases, field measurements, and laboratory experiments. The scope of this activity is to predict dissolved concentrations or solubility limits for elements with radioactive isotopes (actinium, americium, carbon, cesium, iodine, lead, neptunium, plutonium, protactinium, radium, strontium, technetium, thorium, and uranium) relevant to calculated dose. Model outputs for uranium, plutonium, neptunium, thorium, americium, and protactinium are provided in the form of tabulated functions with pH and log fCO{sub 2} as independent variables, plus one or more uncertainty terms. The solubility limits for the remaining elements are either in the form of distributions or single values. Even though selection of an appropriate set of radionuclides documented in Radionuclide Screening (BSC 2002 [DIRS 160059]) includes actinium, transport of Ac is not modeled in the total system performance assessment for the license application (TSPA-LA) model because of its extremely short half-life. Actinium dose is calculated in the TSPA-LA by assuming secular equilibrium with {sup 231}Pa (Section 6.10); therefore, Ac is not analyzed in this report. The output data from this report are fundamental inputs for TSPA-LA used to determine the estimated release of these elements from waste packages and the engineered barrier system. Consistent modeling approaches and environmental conditions were used to develop solubility models for the actinides discussed in this report. These models cover broad ranges of environmental conditions so they are applicable to both waste packages and the invert. Uncertainties from thermodynamic data, water chemistry, temperature variation, and activity coefficients have been quantified or otherwise addressed.

P. Bernot

2005-07-13T23:59:59.000Z

317

Performance and testing of a stationary concentrating collector. [Compound parabolic concentrators coupled to tubular evacuated receivers  

DOE Green Energy (OSTI)

The development of nonimaging solar collectors for heating and cooling applications is reported. A totally stationary concentrating collector has been designed, built, and tested. The collectors employ compound parabolic concentrators coupled to tubular evacuated receivers. Performance of the collector is substantially better than flat plate collectors, and the collectors are suitable for powering mechanically driven air conditioning systems as well as conventional absorption cycle machines. This collector concept was awarded an IR-100 award by Industrial Research Magazine as one of the 100 most significant new developments in 1977.

Cole, R L; Allen, J W; Levitz, N M; McIntire, W R; Schertz, W W

1977-01-01T23:59:59.000Z

318

Optimized III-V Multijunction Concentrator Solar Cells on Patterned Si and Ge Substrates: Final Technical Report, 15 September 2004--30 September 2006  

DOE Green Energy (OSTI)

Goal is to demo realistic path to III-V multijunction concentrator efficiencies > 40% by substrate-engineering combining compositional grading with patterned epitaxy for small-area cells for high concentration.

Ringel, S. A.

2008-11-01T23:59:59.000Z

319

SunShot Initiative: Concentrating Solar Power Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power Staff Concentrating Solar Power Staff to someone by E-mail Share SunShot Initiative: Concentrating Solar Power Staff on Facebook Tweet about SunShot Initiative: Concentrating Solar Power Staff on Twitter Bookmark SunShot Initiative: Concentrating Solar Power Staff on Google Bookmark SunShot Initiative: Concentrating Solar Power Staff on Delicious Rank SunShot Initiative: Concentrating Solar Power Staff on Digg Find More places to share SunShot Initiative: Concentrating Solar Power Staff on AddThis.com... Accomplishments Visiting the SunShot Office Fellowships Postdoctoral Research Contacts Staff Concentrating Solar Power Staff The SunShot Initiative concentrating solar power (CSP) program competitively funds and actively manages the efforts of industry, national laboratories, and universities working to make large-scale dispatchable

320

GaInNAs Junctions for Next-Generation Concentrators: Progress and Prospects  

DOE Green Energy (OSTI)

We discuss progress in the development of GaInNAs junctions for application in next-generation multijunction concentrator cells. A significant development is the demonstration of near-100% internal quantum efficiencies in junctions grown by molecular-beam epitaxy. Testing at high currents validates the compatibility of these devices with concentrator operation. The efficiencies of several next-generation multijunction structures incorporating these state-of-the-art GaInNAs junctions are projected.

Friedman, D. J.; Ptak, A. J.; Kurtz, S. R.; Geisz, J. F.; Kiehl, J.

2005-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Single-junction solar cells with the optimum band gap for terrestrial concentrator applications  

DOE Patents (OSTI)

A single-junction solar cell having the ideal band gap for terrestrial concentrator applications. Computer modeling studies of single-junction solar cells have shown that the presence of absorption bands in the direct spectrum has the effect of "pinning" the optimum band gap for a wide range of operating conditions at a value of 1.14.+-.0.02 eV. Efficiencies exceeding 30% may be possible at high concentration ratios for devices with the ideal band gap.

Wanlass, Mark W. (Golden, CO)

1994-01-01T23:59:59.000Z

322

Capacity Value of Concentrating Solar Power Plants  

DOE Green Energy (OSTI)

This study estimates the capacity value of a concentrating solar power (CSP) plant at a variety of locations within the western United States. This is done by optimizing the operation of the CSP plant and by using the effective load carrying capability (ELCC) metric, which is a standard reliability-based capacity value estimation technique. Although the ELCC metric is the most accurate estimation technique, we show that a simpler capacity-factor-based approximation method can closely estimate the ELCC value. Without storage, the capacity value of CSP plants varies widely depending on the year and solar multiple. The average capacity value of plants evaluated ranged from 45%?90% with a solar multiple range of 1.0-1.5. When introducing thermal energy storage (TES), the capacity value of the CSP plant is more difficult to estimate since one must account for energy in storage. We apply a capacity-factor-based technique under two different market settings: an energy-only market and an energy and capacity market. Our results show that adding TES to a CSP plant can increase its capacity value significantly at all of the locations. Adding a single hour of TES significantly increases the capacity value above the no-TES case, and with four hours of storage or more, the average capacity value at all locations exceeds 90%.

Madaeni, S. H.; Sioshansi, R.; Denholm, P.

2011-06-01T23:59:59.000Z

323

Design of nonimaging concentrators as second stages in tandem with image-forming first-stage concentrators  

SciTech Connect

The flux concentration of paraboloidal mirrors of short focal ratio may be enhanced to near the thermodynamic limit by the addition of low concentration (2-4X) nonimaging concentrators such as compound elliptical concentrators or hyperbolic trumpets. An outline of the design procedure and the results of ray trace analysis are presented.

Greenman, P. (Univ. of Chicago, IL); O'Gallagher, J.; Winston, R.; Welford, W.T.

1980-01-01T23:59:59.000Z

324

A survey on polycyclic aromatic hydrocarbon concentrations in soil in Chiang-Mai, Thailand  

Science Conference Proceedings (OSTI)

Soil samples were collected at 30 sampling sites along roadsides in the city of Chiang-Mai, Thailand, in February 1996, and concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined. The distribution of PAH concentration in the soil samples was almost log-normal for all PAHs. Concentrations of pyrene (Py) and fluoranthene (Fluor) were the highest, followed by those of benzo[ghi]perylene and coronene (Cor). Since PAH concentrations were highest on the roadside where the traffic density was high, vehicles were the main determinants of PAH concentration in soil in Chiang-Mai. Significant correlations among PAH concentrations were found for almost all PAHs. PAH profiles in the air were different from those in the soil. For example, relative benzo[a]pyrene (BaP) concentration in the soil was significantly lower than that in the air. Relative concentrations of Fluor, Py, chrysene, and Cor in the soil were considerably higher than those in the air, due presumably to their difference in photochemical reactivities and in sources. The sampling of soil has advantages relative to that of air: (1) collection of soil is easy; (2) it needs no special equipment and electricity; (3) it takes little time; and (4) it can be collected anywhere. Therefore PAH analysis in soil was useful as a proxy-screening tool for air pollution levels with consideration of compositional differences between soil and air samples.

Amagai, Takashi; Takahashi, Yukari; Matsushita, Hidetsuru [Univ. of Shizuoka (Japan); Morknoy, D.; Sukasem, P.; Taucanon, M. [Technopolis, Pathumthani (Thailand). Environmental Research and Training Center

1999-07-01T23:59:59.000Z

325

The High-Radon Project  

NLE Websites -- All DOE Office Websites (Extended Search)

indoor radon concentrations across the United States. The purpose of this work is to help state and other agencies identify high-radon counties and areas more precisely so that...

326

NREL: Concentrating Solar Power Research - Become Part of SOLRMAP  

NLE Websites -- All DOE Office Websites (Extended Search)

Become Part of SOLRMAP Become Part of SOLRMAP The National Renewable Energy Laboratory (NREL) is inviting additional participation in SOLRMAP-the Solar Resource and Meteorological Assessment Project. In late 2008, we established this effort through a pilot project with a limited number of participants. The 2009 deadline for participation has passed, but we may expand the program in the future. SOLRMAP establishes high-quality solar measurements at targeted locations to enable deployment of concentrating solar thermal projects in the United States. The measurements also provide NREL with critical data for model development and other research that advances techniques in solar resource assessment. At the present time, NREL does not have funding to support SOLRMAP for photovoltaic projects.

327

concentration during interglacials: a comparison between Eemian and Holocene  

E-Print Network (OSTI)

Abstract. A complex earth system model (atmosphere and ocean general circulation models, ocean biogeochemistry and terrestrial biosphere) was used to perform transient simulations of two interglacial sections (Eemian, 128–113 ky B.P., and Holocene, 9 ky B.P.–present). The changes in terrestrial carbon storage during these interglacials were studied with respect to changes in the earth’s orbit. The effects of different climate factors on changes in carbon storage were studied in offline experiments in which the vegetation model was forced only with temperature, hydrological parameters, radiation, or CO2 concentration from the transient runs. The largest anomalies in terrestrial carbon storage were caused by temperature changes. However, the increase in storage due to forest expansion and increased photosynthesis in the high latitudes was nearly balanced by the decrease

G. Schurgers; U. Mikolajewicz; M. Gröger; E. Maier-reimer; M. Vizcaíno; A. Winguth

2006-01-01T23:59:59.000Z

328

Use of electrodialysis for concentrating simulated (Model) drainage collector waters  

SciTech Connect

The volume of mineralized drainage collector waters (DCW) increased as the result of development of soil reclamation. For example, this volume is 0.3 km/sup 3//yr in the Ashkhabad province alone, and the total for the Turkmen SSR is 5 km/sup 3//hr. The degree of mineralization of DCW varies from 2 to 33 g/liter. About 50% of the mineralization of DCW is made up of hardness salts. Desalination of mineralized DCW and their return the water-supply system would decrease consumption of fresh water and diminish salination of existing water sources. The purpose of this work was to examine the possibility of obtaining highly concentrated brines during desalination of simulated DCW without preliminary softening with the use of MK-100M cation-exchange membrane obtained by chemical modification of homogeneous MK-100 cation-exchange membrane with the ethylenediamine.

Grebenyuk, V.D.; Veisov, B.K.; Chebotareva, R.D.; Braude, K.P.; Nefedova, G.Z.

1986-10-10T23:59:59.000Z

329

SunShot Initiative: Baseload Concentrating Solar Power Generation  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Concentrating Solar Power Generation to someone by E-mail Share SunShot Initiative: Baseload Concentrating Solar Power Generation on Facebook Tweet about SunShot Initiative: Baseload Concentrating Solar Power Generation on Twitter Bookmark SunShot Initiative: Baseload Concentrating Solar Power Generation on Google Bookmark SunShot Initiative: Baseload Concentrating Solar Power Generation on Delicious Rank SunShot Initiative: Baseload Concentrating Solar Power Generation on Digg Find More places to share SunShot Initiative: Baseload Concentrating Solar Power Generation on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage CSP Recovery Act Baseload CSP SunShot Multidisciplinary University Research Initiative

330

SunShot Initiative: Concentrating Solar Power Competitive Awards  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power Concentrating Solar Power Competitive Awards to someone by E-mail Share SunShot Initiative: Concentrating Solar Power Competitive Awards on Facebook Tweet about SunShot Initiative: Concentrating Solar Power Competitive Awards on Twitter Bookmark SunShot Initiative: Concentrating Solar Power Competitive Awards on Google Bookmark SunShot Initiative: Concentrating Solar Power Competitive Awards on Delicious Rank SunShot Initiative: Concentrating Solar Power Competitive Awards on Digg Find More places to share SunShot Initiative: Concentrating Solar Power Competitive Awards on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage CSP Recovery Act Baseload CSP SunShot Multidisciplinary University Research Initiative

331

SunShot Initiative: Concentrated Solar Thermoelectric Power  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrated Solar Thermoelectric Concentrated Solar Thermoelectric Power to someone by E-mail Share SunShot Initiative: Concentrated Solar Thermoelectric Power on Facebook Tweet about SunShot Initiative: Concentrated Solar Thermoelectric Power on Twitter Bookmark SunShot Initiative: Concentrated Solar Thermoelectric Power on Google Bookmark SunShot Initiative: Concentrated Solar Thermoelectric Power on Delicious Rank SunShot Initiative: Concentrated Solar Thermoelectric Power on Digg Find More places to share SunShot Initiative: Concentrated Solar Thermoelectric Power on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage CSP Recovery Act Baseload CSP SunShot Multidisciplinary University Research Initiative CSP Heat Integration for Baseload Renewable Energy Deployment

332

AMMONIA CONCENTRATION IN SALTSTONE HEADSPACE SUMMARY REPORT  

SciTech Connect

The Saltstone Facility Documented Safety Analysis (DSA) is under revision to accommodate changes in the Composite Lower Flammability Limit (CLFL) from the introduction of Isopar into Tank 50. Saltstone samples were prepared with an 'MCU' type salt solution spiked with ammonia. The ammonia released from the saltstone was captured and analyzed. The ammonia concentration found in the headspace of samples maintained at 95 C and 1 atm was, to 95% confidence, less than or equal to 3.9 mg/L. Tank 50 is fed by several influent streams. The salt solution from Tank 50 is pumped to the salt feed tank (SFT) in the Saltstone Production Facility (SPF). The premix materials cement, slag and fly ash are blended together prior to transfer to the grout mixer. The premix is fed to the grout mixer in the SPF and the salt solution is incorporated into the premix in the grout mixer, yielding saltstone slurry. The saltstone slurry drops into a hopper and then is pumped to the vault. The Saltstone Facility Documented Safety Analysis (DSA) is under revision to accommodate changes in the Composite Lower Flammability Limit (CLFL) from the introduction of Isopar{reg_sign} L into Tank 50. Waste Solidification-Engineering requested that the Savannah River National Laboratory (SRNL) perform testing to characterize the release of ammonia in curing saltstone at 95 C. The test temperature represents the maximum allowable temperature in the Saltstone Disposal Facility (SDF). Ammonia may be present in the salt solution and premix materials, or may be produced by chemical reactions when the premix and salt solution are combined. A final report (SRNS-STI-2008-00120, Rev. 0) will be issued that will cover in more depth the information presented in this report.

Zamecnik, J; Alex Cozzi, A

2008-09-26T23:59:59.000Z

333

SunShot Initiative: Scattering Solar Thermal Concentrators  

NLE Websites -- All DOE Office Websites (Extended Search)

Scattering Solar Thermal Scattering Solar Thermal Concentrators to someone by E-mail Share SunShot Initiative: Scattering Solar Thermal Concentrators on Facebook Tweet about SunShot Initiative: Scattering Solar Thermal Concentrators on Twitter Bookmark SunShot Initiative: Scattering Solar Thermal Concentrators on Google Bookmark SunShot Initiative: Scattering Solar Thermal Concentrators on Delicious Rank SunShot Initiative: Scattering Solar Thermal Concentrators on Digg Find More places to share SunShot Initiative: Scattering Solar Thermal Concentrators on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage CSP Recovery Act Baseload CSP SunShot Multidisciplinary University Research Initiative CSP Heat Integration for Baseload Renewable Energy Deployment

334

SunShot Initiative: Concentrating Solar Power Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Resources Information Resources Printable Version Share this resource Send a link to SunShot Initiative: Concentrating Solar Power Newsletter to someone by E-mail Share SunShot Initiative: Concentrating Solar Power Newsletter on Facebook Tweet about SunShot Initiative: Concentrating Solar Power Newsletter on Twitter Bookmark SunShot Initiative: Concentrating Solar Power Newsletter on Google Bookmark SunShot Initiative: Concentrating Solar Power Newsletter on Delicious Rank SunShot Initiative: Concentrating Solar Power Newsletter on Digg Find More places to share SunShot Initiative: Concentrating Solar Power Newsletter on AddThis.com... Publications Newsletter Resource Center Multimedia Meetings & Workshops Solar Innovation Timeline Solar Career Map Glossary Concentrating Solar Power Newsletter

335

Lithium Diisopropylamide: Oligomer Structures at Low Ligand Concentrations  

E-Print Network (OSTI)

Lithium Diisopropylamide: Oligomer Structures at Low Ligand Concentrations Jennifer L. Rutherford-dimensional 6Li and 15N NMR spectroscopic studies of lithium diisopropylamide (LDA) solvated ligand concentrations are discussed. Introduction Spectroscopic studies of lithium amides at low ligand

Collum, David B.

336

SunShot Initiative: Low-Cost, Lightweight Solar Concentrators  

NLE Websites -- All DOE Office Websites (Extended Search)

Low-Cost, Lightweight Solar Concentrators to someone by E-mail Share SunShot Initiative: Low-Cost, Lightweight Solar Concentrators on Facebook Tweet about SunShot Initiative:...

337

The Formation of Concentric Vorticity Structures in Typhoons  

Science Conference Proceedings (OSTI)

An important issue in the formation of concentric eyewalls in a tropical cyclone is the development of a symmetric structure from asymmetric convection. It is proposed herein, with the aid of a nondivergent barotropic model, that concentric ...

H-C. Kuo; L-Y. Lin; C-P. Chang; R. T. Williams

2004-11-01T23:59:59.000Z

338

Optimizing mixer geometries for dielectrophoretic micro-concentrators  

E-Print Network (OSTI)

Dielectrophoretic (DEP) force, generated by interdigitated electrodes (IDEs), has been utilized to capture bio-particles for microfluidic concentration. However, due to the localized DEP force, DEP-based ,/ -concentrators ...

Lee, Hsu-Yi

2006-01-01T23:59:59.000Z

339

Improving Concentration Measures Used for Evaluating Air Quality Models  

Science Conference Proceedings (OSTI)

An unfortunate difficulty in model evaluation is that the concentration measure that most models predict, namely the ensemble mean concentration under the plume centerline (or at some location relative to the plume centerline), cannot be measured ...

Russell F. Lee; John S. Irwin

1997-08-01T23:59:59.000Z

340

Process of concentrating ethanol from dilute aqueous solutions thereof  

DOE Patents (OSTI)

Relatively dilute aqueous solutions of ethanol are concentrated by passage through a bed of a crystalline silica polymorph, such as silicalite, to adsorb the ethanol with residual dilute feed in contact with the bed, which is displaced by passing concentrated aqueous ethanol through the bed without displacing the adsorbed ethanol. A product concentrate is then obtained by removing the adsorbed ethanol from the bed together with at least a portion of the concentrated aqueous ethanol used as the displacer liquid. This process permits ethanol to be concentrated from dilute fermentation beers, which may contain from 6 to 10% ethanol, to obtain a concentrate product at very low energy cost having an ethanol concentration in excess of 95%, such as a concentration of from 98 to 99.5%. 5 figs.

Oulman, C.S.; Chriswell, C.D.

1981-07-07T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Process of concentrating ethanol from dilute aqueous solutions thereof  

DOE Patents (OSTI)

Relatively dilute aqueous solutions of ethanol are concentrated by passage through a bed of a crystalline silica polymorph, such as silicalite, to adsorb the ethanol with residual dilute feed in contact with the bed, which is displaced by passing concentrated aqueous ethanol through the bed without displacing the adsorbed ethanol. A product concentrate is then obtained by removing the adsorbed ethanol from the bed together with at least a portion of the concentrated aqueous ethanol used as the displacer liquid. This process permits ethanol to be concentrated from dilute fermentation beers, which may contain from 6 to 10% ethanol, to obtain a concentrate product at very low energy cost having an ethanol concentration in excess of 95%, such as a concentration of from 98 to 99.5%.

Oulman, Charles S. (Ames, IA); Chriswell, Colin D. (Slater, IA)

1981-07-07T23:59:59.000Z

342

SunShot Initiative: Concentrating Solar Power Staff Profiles  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Share this resource Send a link to SunShot Initiative: Concentrating Solar Power Staff Profiles to someone by E-mail Share SunShot Initiative: Concentrating...

343

Concentrating Solar Power Program Review 2013 (Book) (Revised)  

SciTech Connect

This U.S. Department of Energy (DOE) Concentrating Solar Power Program Review Meeting booklet will be provided to attendees at the Concentrating Solar Power Review Meeting in Phoenix, Arizona on April 23-25, 2013.

Not Available

2013-06-01T23:59:59.000Z

344

Geometrical vector flux sinks and ideal flux concentrators  

SciTech Connect

The description of ideal flux concentrators as shapes that do not disturb the geometrical vector flux field is extended to all the known types of ideal flux concentrators. This is accomplished, in part, by the introduction of vector flux sinks.

Greenman, P.

1981-06-01T23:59:59.000Z

345

Syngas into Fuel: Optofluidic Solar Concentrators  

Science Conference Proceedings (OSTI)

Broad Funding Opportunity Announcement Project: Ohio State has developed an iron-based material and process for converting syngas—a synthetic gas mixture—into electricity, H2, and/or liquid fuel with zero CO2 emissions. Traditional carbon capture methods use chemical solvents or special membranes to separate CO2 from the gas exhaust from coal-fired power plants. Ohio State’s technology uses an iron-based oxygen carrier to generate CO2 and H2 from syngas in separate, pure product streams by means of a circulating bed reactor configuration. The end products of the system are H2, electricity, and/or liquid fuel, all of which are useful sources of power that can come from coal or syngas derived from biomass. Ohio State is developing a high-pressure pilot-scale unit to demonstrate this process at the National Carbon Capture Center.

None

2010-10-01T23:59:59.000Z

346

Energy Basics: Power Tower Systems for Concentrating Solar Power  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Concentrating Solar Power Linear...

347

Energy Basics: Thermal Storage Systems for Concentrating Solar...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Concentrating Solar Power Linear...

348

Energy Basics: Dish/Engine Systems for Concentrating Solar Power  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Concentrating Solar Power Linear...

349

Processing of Lead, Zinc, Copper and Nickel Concentrates  

Science Conference Proceedings (OSTI)

Abstract Scope, Processing of copper, zinc, lead and nickel concentrates is becoming more challenging due increasingly complex mineralogy. Smelters are  ...

350

Applications of Concentrating Solar Power in Materials Production  

Science Conference Proceedings (OSTI)

Symposium, Alternative Energy Resources for Metals and Materials Production Symposium. Presentation Title, Applications of Concentrating Solar Power in ...

351

Performance and Reliability of Multijunction III-V Modules for Concentrator Dish and Central Receiver Applications  

Science Conference Proceedings (OSTI)

Over the last 15 years, Solar Systems have developed a dense array receiver PV technology for 500X concentrator reflective dish applications. This concentrator PV technology has been successfully deployed at six different locations in Australia, counting for more than 1 MWp of installed peak power. A new Multijunction III-V receiver to replace the current silicon Point-Contact solar cells has recently been developed. The new receiver technology is based on high-efficiency (>32%) Concentrator Ultra Triple Junction (CUTJ) solar cells from Spectrolab, resulting in system power and energy performance improvement of more than 50% compared to the silicon cells. The 0.235 m{sup 2} concentrator PV receiver, designed for continuous 500X operation, is composed of 64 dense array modules, and made of series and parallel-connected solar cells, totaling approximately 1,500 cells. The individual dense array modules have been tested under high intensity pulsed light, as well as with concentrated sunlight at the Solar Systems research facility and at the National Renewable Energy Laboratory's High Flux Solar Furnace. The efficiency of the dense array modules ranges from 30% to 36% at 500X (50 W/cm{sup 2}, AM1.5D low AOD, 21C). The temperature coefficients for power, voltage and current, as well as the influence of Air Mass on the cell responsivity, were measured. The reliability of the dense array multijunction III-V modules has been studied with accelerated aging tests, such as thermal cycling, damp heat and high-temperature soak, and with real-life high-intensity exposure. The first 33 kWp multijunction III-V receiver was recently installed in a Solar Systems dish and tested in real-life 500X concentrated sunlight conditions. Receiver efficiencies of 30.3% and 29.0% were measured at Standard Operating Conditions and Normal Operating Conditions respectively.

Verlinden, P. J.; Lewandowski, A.; Bingham, C.; Kinsey, G. S.; Sherif, R. A.; Laisch, J. B.

2006-01-01T23:59:59.000Z

352

Electrical and physical characteristics of HfLaON-gated metal-oxide-semiconductor capacitors with various nitrogen concentration profiles  

Science Conference Proceedings (OSTI)

The comparative studies of electrical and physical characteristics of HfLaON-gated metal-oxide-semiconductor (MOS) capacitors with various nitrogen concentration profiles (NCPs) were investigated. Various NCPs in HfLaON gate dielectrics were adjusted ... Keywords: Charge trapping, Current-conduction, High-k dielectric, Metal-oxide-semiconductor (MOS), Nitrogen concentration profiles (NCPs)

Chin-Lung Cheng; Jeng-Haur Horng; Hung-Yang Tsai

2011-02-01T23:59:59.000Z

353

Compound parabolic concentrators for narrowband wireless infrared receivers  

E-Print Network (OSTI)

Compound parabolic concentrators for narrowband wireless infrared receivers Keang-Po Ho Joseph M and hollow compound parabolic concentrators (CPCs), for use in free-space infrared communication receivers terms: compound parabolic concentrators (CPCs); optical bandpass fil- ters; Monte Carlo ray tracing

Kahn, Joseph M.

354

Minimum-mirror-area single-stage solar concentrators  

SciTech Connect

A means of generating a comcentrating mirror of minimum size for a given average flux-concentration output is outlined. The method is useful for acceptance angles typical of those required for tilting and tracking solar concentrators and can result in substantial cost savings when expensive mirrors (i.e.,glass) are used. Comparisons are made with compound parabolic concentrators.

Mills, D.; Harting, E.; Giutronich, J.E.; Cellich, W.; Morton, A.; Walker, I.

1980-12-01T23:59:59.000Z

355

Methylmercury concentrations in broiler's meat and hen's meat and eggs  

SciTech Connect

The concentration of mercury in food has been considered to present the greatest toxicological danger to the average citizen. The presence of mercury in foods has been reported in several studies. Much of the research has been carried out on total mercury concentration in foods and not on methylmercury concentration and as it is known methylmercury is the most dangerous form of mercury. Methylmercury, which is highly resistant to biodegradation, can be synthesized from any other form of mercury in the aquatic biosphere, can be bioconcentrated in the aquatic food chain and through fish-meals can be transported and concentrated in animals and their products. Such food chains, together with the various terrestrial food chains would represent a serious risk for man. This study was undertaken to determine the methylmercury levels in broiler's meat, hen's meat and eggs.

Kambamanoli-Dimou, A. (Technological Education Institute, Larissa (Greece)); Kilikidis, S.; Kamarianos, A. (Aristotelian Univ., Thessaloniki (Greece))

1989-05-01T23:59:59.000Z

356

Summary Status of Conceptual High-Performance, High-Specific-Output Silicon Photovoltaic Systems  

Science Conference Proceedings (OSTI)

The report reviews development efforts and the current status of high-performance, high-specific-output silicon photovoltaic (PV) solar systems. Three system concepts are covered: (1) high-intensity irradiance from individual concentrators directly onto individual PV cells, (2) the redirection of sunlight by a large dish concentrator into a cavity receiver lined with cells, and (3) the redirection of sunlight by a large dish concentrator into a thermophotovoltaic receiver. Key issues, technical risk, and...

1982-05-01T23:59:59.000Z

357

Method for detection of extremely low concentration  

DOE Patents (OSTI)

An ultratrace detector system for hand-held gas chromatography having high sensitivity, for example, to emissions generated during production of weapons, biological compounds, drugs, etc. The detector system is insensitive to water, air, helium, argon, oxygen, and CO.sub.2. The detector system is basically composed of a hand-held capillary gas chromatography (GC), an insulated heated redox-chamber, a detection chamber, and a vapor trap. For example, the detector system may use gas phase redox reactions and spectral absorption of mercury vapor. The gas chromatograph initially separates compounds that percolate through a bed of heated mercuric oxide (HgO) in a silica--or other metal--aerogel material which acts as an insulator. Compounds easily oxidized by HgO liberate atomic mercury that subsequently pass through a detection chamber which includes a detector cell, such as quartz, that is illuminated with a 254 nm ultra-violet (UV) mercury discharge lamp which generates the exact mercury absorption bands that are used to detect the liberated mercury atoms. Atomic mercury strongly absorbs 254 nm energy is therefore a specific signal for reducing compounds eluting from the capillary GC, whereafter the atomic mercury is trapped for example, in a silicon-aerogel trap.

Andresen, Brian D. (Livermore, CA); Miller, Fred S. (Bethal Island, CA)

2002-01-01T23:59:59.000Z

358

Design of nonimaging concentrators as second stages in tandem with image-forming first-stage concentrators  

SciTech Connect

We show how paraboloidal mirrors of short focal ratio and similar systems can have their flux concentration enhanced to near the thermodynamic limit by the addition of nonimaging compound elliptical concentrators.

Winston, R.; Welford, W.T.

1980-02-01T23:59:59.000Z

359

High School  

NLE Websites -- All DOE Office Websites (Extended Search)

High School Please click on the title for more information about each program. Nano*High Nano High Saturday presentations for Bay Area high school students Science Bowl Science...

360

NREL: Energy Analysis - Concentrating Solar Power Results - Life Cycle  

NLE Websites -- All DOE Office Websites (Extended Search)

Concentrating Solar Power Results - Life Cycle Assessment Harmonization Concentrating Solar Power Results - Life Cycle Assessment Harmonization Life Cycle Greenhouse Gas Emissions from Concentrating Solar Power (Factsheet) Cover of the Life Cycle Greenhouse Gas Emissions from Concentrating Solar Power Download the Factsheet Flowchart that shows the life cycle stages for concentrating solar power systems. For help reading this chart, please contact the webmaster. Figure 1. Process flow diagram illustrating the life cycle stages for concentrating solar power (CSP) systems. The yellow box defined by the grey line shows the systems boundaries assumed in harmonization. Enlarge image NREL developed and applied a systematic approach to review literature on life cycle assessments of concentrating solar power (CSP) systems, identify

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Energy 101: Concentrating Solar Power | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrating Solar Power Concentrating Solar Power Energy 101: Concentrating Solar Power Addthis Below is the text version for the Energy 101: Concentrating Solar Power video. The video opens with the words "Energy 101: Concentrating Solar Power." OK. Take the natural heat from the sun, reflect it against a mirror, focus all of that heat on one area, send it through a power system, and you've got a renewable way of making electricity. It's called concentrating solar power, or CSP. Caption: Concentrating Solar Power (CSP): Focuses the sun's heat to make steam and electricity. Now, there are many types of CSP technologies. Towers, dishes, linear mirrors, and troughs. The video goes through a quick panorama of several different types, and several different views, of all of the different types of CSP. Finally, it

362

Concentrating Solar Power Services CSP Services | Open Energy Information  

Open Energy Info (EERE)

Concentrating Solar Power Services CSP Services Concentrating Solar Power Services CSP Services Jump to: navigation, search Name Concentrating Solar Power Services (CSP Services) Place Cologne, Germany Zip D-51143 Sector Solar Product A spin-out of the DLR Institute of Technical Thermodynamics, providing consulting, due diligence and component testing for Solar Thermal Electricity Generation (STEG). References Concentrating Solar Power Services (CSP Services)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Concentrating Solar Power Services (CSP Services) is a company located in Cologne, Germany . References ↑ "Concentrating Solar Power Services (CSP Services)" Retrieved from "http://en.openei.org/w/index.php?title=Concentrating_Solar_Power_Services_CSP_Services&oldid=343830

363

Durability of Poly(Methyl Methacrylate) Lenses Used in Concentrating Photovoltaic Technology (Revised) (Presentation)  

DOE Green Energy (OSTI)

Concentrating photovoltaic (CPV) technology recently gained interest based on its expected low levelized cost of electricity, high efficiency, and scalability. Many CPV systems employ Fresnel lenses composed of poly(methyl methacrylate) (PMMA) to obtain a high optical flux density on the cell. The optical and mechanical durability of these lenses, however, is not well established relative to the desired surface life of 30 years. Our research aims to quantify the expected lifetime of PMMA in key market locations (FL, AZ, and CO).

Miller, D. C.; Carloni, J. D.; Pankow, J. W.; Gjersing, E. L.; To, B.; Packard, C. E.; Kennedy, C. E.; Kurtz, S. R.

2012-01-01T23:59:59.000Z

364

Can a Convective Cloud Feedback Help to Eliminate Winter Sea Ice at High CO2 Concentrations?  

Science Conference Proceedings (OSTI)

Winter sea ice dramatically cools the Arctic climate during the coldest months of the year and may have remote effects on global climate as well. Accurate forecasting of winter sea ice has significant social and economic benefits. Such ...

Dorian S. Abbot; Chris C. Walker; Eli Tziperman

2009-11-01T23:59:59.000Z

365

Cultivation of algae on highly concentrated municipal wastewater as an energy crop for biodiesel production.  

E-Print Network (OSTI)

??University of Minnesota Ph.D. dissertation. June 2012. Major: Bioproducts/Biosystems Science Engineering and Management. Advisor:Dr. Roger Ruan. 1 computer file (PDF); x, 181 pages. There has… (more)

Li, Yecong

2012-01-01T23:59:59.000Z

366

IMPACT OF URANIUM AND THORIUM ON HIGH TIO2 CONCENTRATION NUCLEAR WASTE GLASSES  

Science Conference Proceedings (OSTI)

This study focused on the potential impacts of the addition of Crystalline Silicotitanate (CST) and Monosodium Titanate (MST) from the Small Column Ion Exchange (SCIX) process on the Defense Waste Processing Facility (DWPF) glass waste form and the applicability of the DWPF process control models. MST from the Salt Waste Processing Facility (SWPF) is also considered in the study. The KT08-series of glasses was designed to evaluate any impacts of the inclusion of uranium and thorium in glasses containing the SCIX components. All but one of the study glasses were found to be amorphous by X-ray diffraction (XRD). One of the slowly cooled glasses contained a small amount of trevorite, which is typically found in DWPF-type glasses and had no practical impact on the durability of the glass. The measured Product Consistency Test (PCT) responses for the study glasses and the viscosities of the glasses were well predicted by the current DWPF models. No unexpected issues were encountered when uranium and thorium were added to the glasses with SCIX components.

Fox, K.; Edwards, T.

2012-01-11T23:59:59.000Z

367

High-Efficiency Receivers for Supercritical Carbon Dioxide Cycles, Concentrating Solar Power (Fact Sheet)  

Science Conference Proceedings (OSTI)

Brayton Energy is one of the 2012 SunShot CSP R&D awardees for their advanced receivers. This fact sheet explains the motivation, description, and impact of the project.

Not Available

2012-09-01T23:59:59.000Z

368

Enhanced Carbon Concentration in Camelina: Development of a Dedicated, High-value Biofuels Crop  

Science Conference Proceedings (OSTI)

PETRO Project: UMass is developing an enhanced, biofuels-producing variant of Camelina, a drought-resistant, cold-tolerant oilseed crop that can be grown in many places other plants cannot. The team is working to incorporate several genetic traits into Camelina that increases its natural ability to produce oils and add the production of energy-dense terpene molecules that can be easily converted into liquid fuels. UMass is also experimenting with translating a component common in algae to Camelina that should allow the plants to absorb higher levels of carbon dioxide (CO2), which aids in enhancing photosynthesis and fuel conversion. The process will first be demonstrated in tobacco before being applied in Camelina.

None

2012-01-01T23:59:59.000Z

369

Catalyst for Recombination of Hydrogen and Oxygen in Confined Spaces Under High Concentrations of Hydrogen  

Science Conference Proceedings (OSTI)

Technical Paper / Safety and Technology of Nuclear Hydrogen Production, Control, and Management / Hydrogen Safety and Recombiners

V. Shepelin; D. Koshmanov; E. Chepelin

370

Terrestrial photovoltaic power systems with sunlight concentration. Annual progress report, January 1, 1975--December 31, 1975  

DOE Green Energy (OSTI)

This annual report is for the second year of a program to investigate the characteristics of the components and the total system using sunlight concentrated onto solar cells. The second year was primarily to experimentally investigate the conclusions of the first year of analytical studies. Cells have been fabricated that are designed for different intensities. Typically the efficiency of a cell will increase from its 11 percent at AM1 peak to efficiency at the designed concentration level and return to its initial efficiency at about 3 times its designed concentration level. The developed cells have been tested under high intensity simulators and in concentrated sunlight and have shown to have the predicted response. The experimental testing of passive cooling limitations for cooling cells with just finned arrangements in the back of the cell has been completed in the controlled environment of a wind tunnel. These experiments have confirmed the heat transfer coefficients that had been used in the analytical studies. Testing was done to collect heat transfer coefficients for actual wind conditions and these data show good agreement with the controlled wind tunnel data. Four photovoltaic/concentrator system experiments have been started with CR of about 3, 10, 25, and 100. System analysis has indicated that photovoltaic concentration systems may be attractive in low solar irradiation areas such as Cleveland.

Backus, C.E.

1976-01-31T23:59:59.000Z

371

UESC and High Tech Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Energy Management Program UESC and High Tech Facilities Charles Williams, Lawrence Berkeley National Lab 2 | FUPWG April 2012 High Tech Building UESC Partnership Leveraging Technical Potential, Market Opportunity, Program Resources * Energy-intensive facilities with high savings potential * PG&E service territory - high concentration of high-technology buildings * PG&E UESC program, new and growing * DOE FEMP programs for UESC and High-Tech Buildings * LBNL expertise in labs, data centers, clean rooms * LBNL support for UESC program * UESC potential for innovation * Presidential "We Can't Wait $2 Billion challenge to Federal agencies 3 | FUPWG April 2012 UESC project support at LBNLL Training /Education

372

$60 Million to Fund Projects Advancing Concentrating Solar Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

$60 Million to Fund Projects Advancing Concentrating Solar Power $60 Million to Fund Projects Advancing Concentrating Solar Power $60 Million to Fund Projects Advancing Concentrating Solar Power November 8, 2011 - 10:34am Addthis A 101 video on concentrating solar panel systems. | Courtesy of the Energy Department Jesse Gary Solar Energy Technologies Program On Tuesday, October 25, the Energy Department's SunShot initiative announced a $60 million funding opportunity (FOA) to advance concentrating solar power in the United States. The SunShot program seeks to support research into technologies with potential to dramatically increase efficiency, lower costs, and deliver more reliable performance than existing commercial and near-commercial concentrating solar power (CSP) systems. The Department expects to fund 20 to 22 projects, and we encourage

373

Definition: Phasor Data Concentrator (PDC) | Open Energy Information  

Open Energy Info (EERE)

Phasor Data Concentrator (PDC) Phasor Data Concentrator (PDC) Jump to: navigation, search Dictionary.png Phasor Data Concentrator (PDC) Receives and time-synchronizes phasor data from multiple phasor measurement units (PMUs) to produce a real-time, time-aligned output data stream. A PDC can exchange phasor data with PDCs at other locations. Through use of multiple PDCs, multiple layers of concentration can be implemented within an individual synchrophasor data system.[1] Related Terms smart grid References ↑ https://www.smartgrid.gov/category/technology/phasor_data_concentrator_pdc [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitions|Template:BASEPAGENAME]] Retrieved from "http://en.openei.org/w/index.php?title=Definition:Phasor_Data_Concentrator_(PDC)&oldid=493108"

374

$60 Million to Fund Projects Advancing Concentrating Solar Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

$60 Million to Fund Projects Advancing Concentrating Solar Power $60 Million to Fund Projects Advancing Concentrating Solar Power $60 Million to Fund Projects Advancing Concentrating Solar Power November 8, 2011 - 10:34am Addthis A 101 video on concentrating solar panel systems. | Courtesy of the Energy Department Jesse Gary Solar Energy Technologies Program On Tuesday, October 25, the Energy Department's SunShot initiative announced a $60 million funding opportunity (FOA) to advance concentrating solar power in the United States. The SunShot program seeks to support research into technologies with potential to dramatically increase efficiency, lower costs, and deliver more reliable performance than existing commercial and near-commercial concentrating solar power (CSP) systems. The Department expects to fund 20 to 22 projects, and we encourage

375

Method and apparatus for concentrating vapors for analysis  

DOE Patents (OSTI)

A pre-concentration device and a method are disclosed for concentrating gaseous vapors for analysis. Vapors sorbed and concentrated within the bed of the pre-concentration device are thermally desorbed, achieving at least partial separation of the vapor mixtures. The pre-concentration device is suitable, e.g., for pre-concentration and sample injection, and provides greater resolution of peaks for vapors within vapor mixtures, yielding detection levels that are 10-10,000 times better than direct sampling and analysis systems. Features are particularly useful for continuous unattended monitoring applications. The invention finds application in conjunction with, e.g., analytical instruments where low detection limits for gaseous vapors are desirable.

Grate, Jay W. (West Richland, WA); Baldwin, David L. (Kennewick, WA); Anheier, Jr., Norman C. (Richland, WA)

2012-06-05T23:59:59.000Z

376

ARM - Evaluation Product - Droplet Number Concentration Value-Added Product  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsDroplet Number Concentration Value-Added ProductsDroplet Number Concentration Value-Added Product Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Droplet Number Concentration Value-Added Product 2005.01.01 - 2010.12.30 Site(s) SGP General Description Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al.

377

Two dimensional compound parabolic concentrating collectors. Final report  

SciTech Connect

Seven different compound parabolic concentrating (CPC) collector designs were tested by the ray trace method. The comparison of the collector was performed by simulating sunlight striking the designs at various angles of the sun during the course of the day. All of the CPC solar collector designs used the same type of reflective material, Kinglux reflective aluminum, which is a highly reflective surface used in solar applications. The CPC solar collector designs were subjected to a light source consisting of one helium-neon laser. The laser, to represent the effect of sunlight on the stationary CPC solar collector, was slowly moved across the aperture opening. This is explained in detail. Mathematic equations were used to develop the different CPC solar collector designs. The different shapes for each collector design, were acquired by varying the size of the absorber tube, and also by varying the acceptance angle of the collector. The seven CPC solar collector designs were tested, and the optimal design was selected for experimental testing.

Henry, J.P.; Gamble, N.T.; Cassidy, S.A.

1983-12-31T23:59:59.000Z

378

Measured concentrations of radioactive particles in air in the vicinity of the Anaconda Uranium Mill  

Science Conference Proceedings (OSTI)

Concentrations of radioactive particles (U-238, Th-230, Ra-226, and Pb-210) in air were measured in the vicinity of the Anaconda Uranium Mill, Bluewater, New Mexico. Airborne particles were collected at three stations for about two-thirds of a year using a continuous collection method at a sampling rate of 10 L/min, and also were measured in monthly composites collected periodically at four stations using high volume air samplers at a sampling rate of 1400 L/min. The ratios of concentrations of each radionuclide to the concentrations of U-238 indicate that the concentrations of the radionuclides are influenced principally by the proximity of the major sources of emission and the direction of the wind. In all cases, the concentration of Pb-210 exceeded that of U-238. The ratio of Pb-210/U-238 was 12.3 and 13.3 for stations dominated by the emissions from the tailings and ore pads, but was only 1.6 for the station dominated by the yellowcake stack emission. The ratio of the radionuclide concentrations measured by the two methods of sample collection was between 0.8 and 1.2 for uranium, radium, and lead at station 104, but was 0.28 to 1.7 for thorium, radium, and lead at stations 101 and 102. The average concentrations calculated from the measurements made in this study suggest that releases from the Anaconda mill were made well within the existing limits of the maximum permissible concentrations for inhalation exposure of the general public.

Momeni, M H; Kisieleski, W E

1980-02-01T23:59:59.000Z

379

NREL: Concentrating Solar Power Research - 10-Megawatt Supercritical...  

NLE Websites -- All DOE Office Websites (Extended Search)

Supercritical Carbon Dioxide Turbine Test-Thermodynamic Cycle to Revolutionize CSP Systems Advancing concentrating solar power (CSP) systems to the target cost of 0.06...

380

NREL: Concentrating Solar Power Research - Power Block R&D  

NLE Websites -- All DOE Office Websites (Extended Search)

the potential of advanced power cycles to integrate with concentrating solar power (CSP) systems. This research increases the efficiency and reduces the levelized cost of...

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

SunShot Concentrating Solar Power Program Review 2013 - Instructions...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SunShot Concentrating Solar Power Program Review 2013 April 23-25, 2013 Phoenix, Arizona Skip navigation to main content Menu Home About Agenda Register Venue Presentations...

382

Coal-based Direct Reduction of Iron Concentrate Pellets by ...  

Science Conference Proceedings (OSTI)

Presentation Title, Coal-based Direct Reduction of Iron Concentrate Pellets by Microwave Heating. Author(s), Wang Xia, Huang Zhucheng. On-Site Speaker ...

383

SOLAR THERMAL CONCENTRATOR APPARATUS, SYSTEM, AND METHOD - Energy ...  

SOLAR THERMAL CONCENTRATOR APPARATUS ... The invention was made with the State of California's support under the California Energy Commission contract No. 5005 ...

384

Impact of Heat Transfer Media on Materials for Concentrated Solar ...  

Science Conference Proceedings (OSTI)

Presentation Title, Impact of Heat Transfer Media on Materials for Concentrated Solar Power. Author(s), Dane Wilson. On-Site Speaker (Planned), Dane Wilson.

385

SunShot Concentrating Solar Power Program Review 2013 - Speakers  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Power (CSP), Concentrating PV (CPV), as well as run-of-river hydro, geothermal, and biomass power projects. Highlight Presentation Speakers Daniel Chen, Business...

386

Method of trivalent chromium concentration determination by atomic spectrometry  

DOE Patents (OSTI)

A method is disclosed for determining the concentration of trivalent chromium Cr(III) in a sample. The addition of perchloric acid has been found to increase the atomic chromium spectrometric signal due to Cr(III), while leaving the signal due to hexavalent chromium Cr(VI) unchanged. This enables determination of the Cr(III) concentration without pre-concentration or pre-separation from chromium of other valences. The Cr(III) concentration may be measured using atomic absorption spectrometry, atomic emission spectrometry or atomic fluorescence spectrometry.

Reheulishvili, Aleksandre N. (Tbilisi, 0183, GE); Tsibakhashvili, Neli Ya. (Tbilisi, 0101, GE)

2006-12-12T23:59:59.000Z

387

Growth History Of Kilauea Inferred From Volatile Concentrations...  

Open Energy Info (EERE)

Growth History Of Kilauea Inferred From Volatile Concentrations In Submarine-Collected Basalts Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Growth...

388

Modelling Concentrating Solar Power with Thermal Energy Storage...  

NLE Websites -- All DOE Office Websites (Extended Search)

Modelling Concentrating Solar Power with Thermal Energy Storage for Integration Studies Marissa Hummon 3 rd International Solar Power Integration Workshop October 20-22, 2013...

389

Modular Off-Axis Fiber Optic Solar Concentrator  

interior lighting: Sunlight Direct, ... a Modular Off-Axis Fiber Optic Solar Concentrator, uses novel embodiments of an off-axis aspheric focusing system to achieve ...

390

Concentrating Solar Power: Solar Energy Technologies Program (SETP) (Fact Sheet)  

DOE Green Energy (OSTI)

Fact sheet summarizing the goals and activities of the DOE Solar Energy Technologies Program efforts within its concentrating solar power subprogram.

Not Available

2009-10-01T23:59:59.000Z

391

Human Exposure to Ultrafine Particles-Sources, Concentrations...  

NLE Websites -- All DOE Office Websites (Extended Search)

Human Exposure to Ultrafine Particles-Sources, Concentrations, Indoor-Outdoor Relationships, and Mitigation Techniques Speaker(s): Lance Wallace Date: July 22, 2013 - 12:00pm -...

392

Concentrating solar power technologies offer utility-scale power ...  

U.S. Energy Information Administration (EIA)

Concentrating solar power (CSP) is a utility-scale renewable energy option for generating electricity that is receiving considerable attention in the southwestern ...

393

Study on the Pelletizing of Pyrite Cinder with Magnetite Concentrate ...  

Science Conference Proceedings (OSTI)

... on the feasibility of pelletizing with magnetite concentrate and the wasted pyrite ... Correlating Long Term Production Life-Cycles in the Materials and Energy ...

394

DOE to Invest $35 Million in Concentrating Solar Power Projects  

DOE to Invest $35 Million in Concentrating Solar Power Projects September 19, 2008. The U.S. Department of Energy (DOE) selected 15 new projects--for ...

395

Carbothermic Reduction of Ilmenite Concentrate with Coke Assisted ...  

Science Conference Proceedings (OSTI)

In this study, the carbothermic reduction behavior of the ilmenite concentrate milled was investigated. It was found that the ball milling method can results a ...

396

Thermoelectrics Combined with Solar Concentration for Electrical and Thermal Cogeneration.  

E-Print Network (OSTI)

??A solar tracker and concentrator was designed and assembled for the purpose of cogeneration of thermal power and electrical power using thermoelectric technology. A BiTe… (more)

Jackson, Philip Robert

2012-01-01T23:59:59.000Z

397

NREL: Learning - Student Resources on Concentrating Solar Power  

NLE Websites -- All DOE Office Websites (Extended Search)

and College Level NREL Concentrating Solar Power Research Features information about parabolic troughs, systems-driven modeling and analysis, and other advanced components and...

398

Fluidised Bed Technology for Gold Ore and Gold Concentrate  

Science Conference Proceedings (OSTI)

Presentation Title, Fluidised Bed Technology for Gold Ore and Gold Concentrate. Author(s) ... such as the circulating fluidised bed and the bubbling fluidized bed.

399

SunShot Initiative: Concentrating Solar Power Staff Profiles  

NLE Websites -- All DOE Office Websites (Extended Search)

Staff Profiles The SunShot Initiative concentrating solar power (CSP) program competitively funds and actively manages the efforts of industry, national laboratories, and...

400

NREL: Concentrating Solar Power Research - Updated Solar Resource...  

NLE Websites -- All DOE Office Websites (Extended Search)

international activities and work with federal agencies. Printable Version Concentrating Solar Power Research Home Projects Research Staff Working with Us Data & Resources...

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Reductive Sulfur-fixation Smelting of Stibnite Concentrate in Sodium ...  

Science Conference Proceedings (OSTI)

Abstract Scope, A new process to extracted antimony directly from stibnite concentrate by reductive sulfur-fixation smelting in sodium molten salt has been ...

402

Drivers and Barriers in the Current Concentrated Solar Power...  

Open Energy Info (EERE)

Current Concentrated Solar Power (CSP) Market (Webinar) Focus Area: Solar Topics: Market Analysis Website: www.leonardo-energy.orgwebinar-drivers-and-barriers-current-csp-marke...

403

Techno-economic Appraisal of Concentrating Solar Power Systems (CSP).  

E-Print Network (OSTI)

?? The diffusion of Concentrating Solar Power Systems (CSP) systems is currently taking place at a much slower pace than photovoltaic (PV) power systems. This… (more)

Gasti, Maria

2013-01-01T23:59:59.000Z

404

Photovoltaic concentrator technology development project. Sixth project integration meeting  

DOE Green Energy (OSTI)

Thirty-three abstracts and short papers are presented which describe the current status of research, development, and demonstration of concentrator solar cell technology. Solar concentrators discussed include the parabolic trough, linear focus Fresnel lens, point focus Fresnel lens, and the parabolic dish. Solar cells studied include silicon, GaAs, and AlGaAs. Research on multiple junction cells, combined photovoltaic/thermal collectors, back contact solar cells, and beam splitter modules is described. Concentrator solar cell demonstration programs are reported. Contractor status summaries are given for 33 US DOE concentrator solar cell contracts; a description of the project, project status, and key results to date is included. (WHK)

None

1980-10-01T23:59:59.000Z

405

Impact of Concentrate Feed Temporal Fluctuations on a Copper ...  

Science Conference Proceedings (OSTI)

In all simulated cases, the time-mean concentrate throughput remained constant to .... Reduction Product Separation by Vacuum Distillation in the Process of ...

406

Atmospheric CH4 Concentrations from the CSIRO GASLAB Flask Sampling...  

NLE Websites -- All DOE Office Websites (Extended Search)

CH4 Concentrations from the CSIRO GASLAB Flask Sampling Network image Alert, NWT, Canada Cape Ferguson, Australia Cape Grim, Australia Estevan Point, BC, Canada Macquarie...

407

Single-junction solar cells with the optimum band gap for terrestrial concentrator applications  

DOE Patents (OSTI)

A single-junction solar cell is described having the ideal band gap for terrestrial concentrator applications. Computer modeling studies of single-junction solar cells have shown that the presence of absorption bands in the direct spectrum has the effect of ''pinning'' the optimum band gap for a wide range of operating conditions at a value of 1.14[+-]0.02 eV. Efficiencies exceeding 30% may be possible at high concentration ratios for devices with the ideal band gap. 7 figures.

Wanlass, M.W.

1994-12-27T23:59:59.000Z

408

Concentrated ion beam emitted from an enlarged cylindrical-anode-layer Hall plasma accelerator and mechanism  

SciTech Connect

An enlarged cylindrical-anode-layer Hall plasma accelerator with an outlet diameter of 150 mm is experimentally demonstrated to produce a concentrated ion beam, especially at a high discharge voltage, with a high current utilization efficiency of up to {approx}0.9. Numerical investigation based on the three-dimensional particle-in-cell method is performed to study the ion dynamics and elucidate the origin of the ion beam characteristics. The simulation results reveal that the equipotential lines play an important role in the surface near the anode emitting the ions. The ion emitting surface is determined by the magnetic field lines near the anode and the magnetic mirror contributes to the concentrated beam significantly. The high current utilization efficiency results from the appropriate obliquity of the magnetic mirror.

Geng, S. F.; Wang, C. X. [Southwestern Institute of Physics, Chengdu 610041 (China); Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong); Tang, D. L.; Qiu, X. M. [Southwestern Institute of Physics, Chengdu 610041 (China); Chu, Paul K. [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong)

2013-01-28T23:59:59.000Z

409

Equilibrium Conformations of Concentric-tube Continuum Robots  

Science Conference Proceedings (OSTI)

Robots consisting of several concentric, preshaped, elastic tubes can work dexterously in narrow, constrained, and/or winding spaces, as are commonly found in minimally invasive surgery. Previous models of these â??active cannulasâ?ť assume ... Keywords: active cannula, concentric tube robot, continuum robot, elastica, flexible arms, kinematics, mechanics, medical robots, snake-like robot, variational calculus

D. Caleb Rucker; Robert J. Webster, III; Gregory S. Chirikjian; Noah J. Cowan

2010-09-01T23:59:59.000Z

410

SunLab: Concentrating Solar Power Program Overview  

DOE Green Energy (OSTI)

DOE's Concentrating Solar Power (CSP) program is collaborating with its partners in the private sector to develop two new solar technologies -- power towers and dish/engines -- to meet the huge commercial potential for solar power. Concentrating solar power plants produce electric power by first converting the sun's energy into heat, and then to electricity in a conventional generator.

NONE

1998-11-24T23:59:59.000Z

411

Limited Temporal Variability of Arsenic Concentrations in 20 Wells  

E-Print Network (OSTI)

Limited Temporal Variability of Arsenic Concentrations in 20 Wells Monitored for 3 Years switched their water consumption to wells that meet the local standard for As in drinking water of 50 µg if As concentrations in those wells could change over time. To address this issue, we report here precise groundwater

van Geen, Alexander

412

PROCESS FOR THE CONCENTRATION OF ORES CONTAINING GOLD AND URANIUM  

DOE Patents (OSTI)

ABS>A process is described for concentrating certain low grade uranium and gold bearing ores, in which the gangue is mainly quartz. The production of the concentrate is accomplished by subjecting the crushed ore to a froth floatation process using a fatty acid as a collector in conjunction with a potassium amyl xanthate collector. Pine oil is used as the frothing agent.

Gaudin, A.M.; Dasher, J.

1958-06-10T23:59:59.000Z

413

Mirror alignment and focus of point-focus solar concentrators  

DOE Green Energy (OSTI)

Distributed point-focusing solar concentrators are being developed for dish-Stirling systems and other applications. Many of these concentrators make use of faceted mirrors that have to be accurately aligned. Some of the solar concentrator designs use stretched-membrane facets that also require focusing. Accurate mirror alignment and focus of faceted solar concentrators have two benefits. First, the concentration ratio of the concentrator/receiver (collector) system is improved with accurate alignment and focus. The receiver aperture diameter can therefore be smaller, thereby reducing thermal losses from the receiver and improving the overall efficiency of the collector. Second, and perhaps more importantly, flux intensities on the receiver can be sensitive to facet alignment and focus. In this paper, the theory and practical application of an alignment and focusing technique are presented. In the technique, light from an artificial source is reflected from the concentrator`s facets to a target. From basic geometric principles, the shape and location of the reflected light on the target can be predicted. Alignment is accomplished by adjusting the facets aim so that the reflected image falls on the predetermined location. To focus a stretched-membrane facet, the reflected image size is adjusted to match that of the target. The governing equations used to draw the alignment targets are developed and the practical application of the technique to the alignment and focus of the Cummins Power Generation, Inc. CPG-460 are presented. Alignment uncertainty associated with this technique on the CPG-460 is also discussed.

Diver, R.B.

1994-11-01T23:59:59.000Z

414

Estimating Gas Concentration of Coal Mines Based on ISGNN  

Science Conference Proceedings (OSTI)

Online detecting failure of gas sensors in mine wells is an important problem. A key step for solution of the problem is estimating sample values of detected gas sensor, according to sample values of other gas sensors. We propose a scheme based on ISGNN ... Keywords: Estimating gas concentration, Gas concentration modeling, Generating Neural Networks, ISGNN

Aiguo Li; Lina Song

2009-11-01T23:59:59.000Z

415

Effect of Substrate Concentration on Methane Fermentation of Cattle Dung  

Science Conference Proceedings (OSTI)

Methane fermentation of cattle manure (CM) with different total solid contents were conducted in the laboratory-scale batch reactors (2.5 L volume) in order to determine the substrate concentration performance and potential energy recovery at the optimal ... Keywords: Cattle manure, Substrate concentration, Dry fermentation, Wet fermentation, Biogas

Jha Ajay Kumar; He Junguo; Li Jianzheng; Zheng Guocheng

2010-03-01T23:59:59.000Z

416

Freeze Concentration of Dairy Products, Phase Three and Phase Four  

Science Conference Proceedings (OSTI)

Freeze concentration offers substantially increased electricity demand while providing dairy processors with new and improved products. Pilot testing demonstrates the smoother and creamier taste of freeze concentrated milk products. Economic analyses indicate that this technology can produce superior products competitive with state-of-the-art evaporation technology.

2001-03-22T23:59:59.000Z

417

Free Processes via Matrix Theory Concentration week on free Probability  

E-Print Network (OSTI)

Free Processes via Matrix Theory Concentration week on free Probability Texas A&M, July 9-13. Nizar Demni Paris VI University July 10, 2007 Nizar Demni Paris VI University Free Processes via Matrix Theory Concentration week on free Pr #12;Definitions Non commutative probability space : Unital Algebra A + linear

Anshelevich, Michael

418

IEA-Technology Roadmap: Concentrating Solar Power | Open Energy Information  

Open Energy Info (EERE)

IEA-Technology Roadmap: Concentrating Solar Power IEA-Technology Roadmap: Concentrating Solar Power Jump to: navigation, search Tool Summary Name: IEA-Technology Roadmap: Concentrating Solar Power Agency/Company /Organization: International Energy Agency Sector: Energy Focus Area: Solar, - Concentrating Solar Power Topics: Implementation, Pathways analysis Resource Type: Guide/manual Website: www.iea.org/papers/2010/csp_roadmap.pdf Cost: Free IEA-Technology Roadmap: Concentrating Solar Power Screenshot References: IEA-CSP Roadmap[1] "This roadmap identifies technology, economy and policy goals and milestones needed to support the development and deployment of CSP, as well as ongoing advanced research in CSF. It also sets out the need for governments to implement strong, balanced policies that favour rapid

419

Energy 101: Concentrating Solar Power | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy 101: Concentrating Solar Power Energy 101: Concentrating Solar Power Energy 101: Concentrating Solar Power August 6, 2010 - 12:58pm Addthis Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs How does it work? Concentrating solar power technologies use mirrors to reflect sunshine, turning it into an intense beam that's collected as heat. Some of the heat is used to produce electricity immediately. The rest is stored so that the generators can provide power for homes and businesses long after the sun has set Whether capturing the sun's heat from towers, dishes, or troughs, concentrating solar power (CSP) technology is making exciting advances. So exciting, in fact, that the federal government is looking at more than 25 square miles in Nevada to demonstrate new CSP technology research.

420

Concentrating Solar Power: Best Practices Handbook for the Collection and  

Open Energy Info (EERE)

Concentrating Solar Power: Best Practices Handbook for the Collection and Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Solar Topics: Resource assessment, Technology characterizations Resource Type: Dataset, Guide/manual, Lessons learned/best practices Website: www.nrel.gov/docs/fy10osti/47465.pdf Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data Screenshot References: CSP Guide[1] Logo: Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

DOE Statement on Savannah River Site Vitrified Waste Concentrations |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Statement on Savannah River Site Vitrified Waste Concentrations Statement on Savannah River Site Vitrified Waste Concentrations DOE Statement on Savannah River Site Vitrified Waste Concentrations April 30, 2010 - 12:30pm Addthis "The Office of Environmental Management has decided not to move forward at this time with its February decision to direct contractors to start planning for higher concentrations of plutonium in waste canisters at the Savannah River Site. While this may ultimately be a better way to manage and minimize the volume of waste, the Department wants to further review the issues involved before proceeding. No canisters have been filled at the higher concentration level." Addthis Related Articles Energy Secretary Chu Announces $6 Billion in Recovery Act Funding for Environmental Cleanup Department of Energy Projects Win 36 R&D 100 Awards for 2011

422

Concentration-Temperature Superposition of Helix Folding Rates in Gelatin  

E-Print Network (OSTI)

We study the kinetics of helix-coil transition in water solutions of gelatin (collagen protein) by optical rotation techniques combined with thermal characterization. By examining the rates of secondary helix folding, and covering a very wide range of solution concentrations, we are able to identify a universal exponential dependence of folding rate on concentration and quench temperature. We demonstrate a new concentration-temperature superposition of data at all temperatures and concentrations, and build the corresponding master curve. The results support the concept of a diffuse helix-coil transition. We find no concentration dependance of the normalized rate constant, suggesting first order (single) kinetics of secondary helix folding dominate in the early stages of renaturation.

J. L. Gornall; E. M. Terentjev

2006-02-07T23:59:59.000Z

423

High temperature superconductor current leads  

DOE Patents (OSTI)

An electrical lead having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths.

Hull, John R. (Hinsdale, IL); Poeppel, Roger B. (Glen Ellyn, IL)

1995-01-01T23:59:59.000Z

424

Breaker concentrations required to improve the permeability of proppant packs damaged by concentrated linear and borate-crosslinked fracturing fluids  

Science Conference Proceedings (OSTI)

This paper reports on the concentrations of an oxidative breaker required to reduce significantly the proppant-pack permeability damage caused by aqueous hydraulic fracturing fluids. Long-term, proppant-pack permeability testing was used to evaluate linear and borate-crosslinked gels. Results indicate that increasing the breaker concentration can reduce proppant-pack permeability damage very effectively.

Brannon, H. (BJ Services (United States)); Pulsinelli, R.J. (Dowell Schlumberger, Tulsa, OK (United States))

1992-11-01T23:59:59.000Z

425

Thermal stress analysis of eccentric tube receiver using concentrated solar radiation  

SciTech Connect

In the parabolic trough concentrator with tube receiver system, the heat transfer fluid flowing through the tube receiver can induce high thermal stress and deflection. In this study, the eccentric tube receiver is introduced with the aim to reduce the thermal stresses of tube receiver. The ray-thermal-structural sequential coupled numerical analyses are adopted to obtain the concentrated heat flux distributions, temperature distributions and thermal stress fields of both the eccentric and concentric tube receivers. During the sequential coupled numerical analyses, the concentrated heat flux distribution on the bottom half periphery of tube receiver is obtained by Monte-Carlo ray tracing method, and the fitting function method is introduced for the calculated heat flux distribution transformation from the Monte-Carlo ray tracing model to the CFD analysis model. The temperature distributions and thermal stress fields are obtained by the CFD and FEA analyses, respectively. The effects of eccentricity and oriented angle variation on the thermal stresses of eccentric tube receiver are also investigated. It is recommended to adopt the eccentric tube receiver with optimum eccentricity and 90 oriented angle as tube receiver for the parabolic trough concentrator system to reduce the thermal stresses. (author)

Wang, Fuqiang; Shuai, Yong; Yuan, Yuan; Yang, Guo; Tan, Heping [School of Energy Science and Engineering, Harbin Institute of Technology, 92, West Dazhi Street, Harbin 150001 (China)

2010-10-15T23:59:59.000Z

426

Secondary and compound concentrators for parabolic-dish solar-thermal power systems  

SciTech Connect

A secondary optical element may be added to a parabolic dish solar concentrator to increase the geometric concentration ratio attainable at a given intercept factor. This secondary may be a Fresnel lens or a mirror, such as a compound elliptic concentrator or a hyperbolic trumpet. At a fixed intercept factor, higher overall geometric concentration may be obtainable with a long focal length primary and a suitable secondary matched to it. Use of a secondary to increase the geometric concentration ratio is more likely to be worthwhile if the receiver temperature is high and if errors in the primary are large. Folding the optical path with a secondary may reduce cost by locating the receiver and power conversion equipment closer to the ground and by eliminating the heavy structure needed to support this equipment at the primary focus. Promising folded-path configurations include the Ritchey-Chretien and perhaps some three-element geometries. Folding the optical path may be most useful in systems that provide process heat.

Jaffe, L.D.; Poon, P.T.

1981-04-15T23:59:59.000Z

427

Thermodynamic modeling of neptunium(V)-acetate complexation in concentrated NaCl media  

Science Conference Proceedings (OSTI)

The complexation of neptunium(V), Np(V), with the acetate anion, Ac{sup -}, was measured in sodium chloride media to high concentration using an extraction technique. The data were interpreted using the thermodynamic formalism of Pitzer, which is valid to high electrolyte concentrations. A consistent model for the deprotonation constants of acetic acid in NaCl and NaClO{sub 4} media was developed. For the concentrations of acetate expected in a waste repository, only the neutral complex NpO{sub 2}Ac(aq) was important in describing the interactions between the neptunyl ion and acetate. The thermodynamic stability constant log {beta}{sup 0}{sub 101} for the reaction NpO{sub 2}{sup +} + Ac{sup -} {leftrightarrow} NpO{sub 2}Ac was calculated to be 1.46{plus_minus}0.11. This weak complexing behavior between the neptunyl ion and acetate indicates that acetate will not significantly enhance dissolved Np(V) concentrations in ground waters associated with nuclear waste repositories that may contain acetate.

Novak, C.F.; Borkowski, M.; Choppin, G.R.

1995-09-01T23:59:59.000Z

428

RECALIBRATION OF H CANYON ONLINE SPECTROPHOTOMETER AT EXTENDED URANIUM CONCENTRATION  

SciTech Connect

The H Canyon online spectrophotometers are calibrated for measurement of the uranium and nitric acid concentrations of several tanks in the 2nd Uranium Cycle.[1] The spectrometers, flow cells, and prediction models are currently optimized for a process in which uranium concentrations are expected to range from 0-15 g/L and nitric acid concentrations from 0.05-6 M. However, an upcoming processing campaign will involve 'Super Kukla' material, which has a lower than usual enrichment of fissionable uranium. Total uranium concentrations will be higher, spanning approximately 0-30 g/L U, with no change in the nitric acid concentrations. The new processing conditions require the installation of new flow cells with shorter path lengths. As the process solutions have a higher uranium concentration, the shorter path length is required to decrease the absorptivity to values closer to the optimal range for the instrument. Also, new uranium and nitric acid prediction models are required to span the extended uranium concentration range. The models will be developed for the 17.5 and 15.4 tanks, for which nitric acid concentrations will not exceed 1 M. The restricted acid range compared to the original models is anticipated to reduce the measurement uncertainty for both uranium and nitric acid. The online spectrophotometers in H Canyon Second Uranium Cycle were modified to allow measurement of uranium and nitric acid for the Super Kukla processing campaign. The expected uranium concentrations, which are higher than those that have been recently processed, required new flow cells with one-third the optical path length of the existing cells. Also, new uranium and nitric acid calibrations were made. The estimated reading uncertainties (2{sigma}) for Tanks 15.4 and 17.5 are {approx}5% for uranium and {approx}25% for nitric acid.

Lascola, R

2008-10-29T23:59:59.000Z

429

On the entanglement concentration of three-partite states  

E-Print Network (OSTI)

We investigate the concentration of multi-party entanglement by focusing on simple family of three-partite pure states, superpositions of Greenberger-Horne-Zeilinger states and singlets. Despite the simplicity of the states, we show that they cannot be reversibly concentrated by the standard entanglement concentration procedure, to which they seem ideally suited. Our results cast doubt on the idea that for each N there might be a finite set of N-party states into which any pure state can be reversibly transformed. We further relate our results to the concept of locking of entanglement of formation.

Berry Groisman; Noah Linden; Sandu Popescu

2005-07-30T23:59:59.000Z

430

Durability of Polymeric Encapsulation Materials for Concentrating Photovoltaic Systems (Presentation)  

DOE Green Energy (OSTI)

Presented at the 7th International Conference on Concentrating Photovoltaic Systems (CPV-7), 4-6 April 2011, Las Vegas, Nevada. Many concentrating photovoltaic (CPV) systems use a polymeric encapsulant to couple an optical component and/or coverglass to the cell. In that location, the encapsulation improves the transmission of concentrated optical flux through interfaces(s) while protecting the cell from the environment. The durability of encapsulation materials, however, is not well established relative to the desired service life of 30 years. Therefore, we have initiated a screen test to identify the field-induced failure modes for a variety of popular PV encapsulation materials.

Miller, D. C.; Muller, M.; Kempe, M. D.; Araki, K.; Kennedy, C. E.; Kurtz, S. R.

2011-04-01T23:59:59.000Z

431

Photovoltaic concentrator with plastic-film reflector. Final report  

DOE Green Energy (OSTI)

A 4m diameter reflective film, parabolic dish concentrator proposed for use with a photovoltaic array has been designed, fabricated, and tested. The concentrator is made from aluminized film gores (wedge shaped pieces) that are taped together along their edges to form a dish. The shape of the dish is maintained by a pressure difference between the front and back. The deep dish was designed to illuminate a cylindrical receiver populated by solar cells with a geometric concentration ratio of 145. Three full scale dishes were made in sequence, each using improvements suggested by the previous design. They were tested with a laser to determine surface errors and flux uniformity on the target.

Not Available

1982-06-01T23:59:59.000Z

432

Design of photovoltaic central power station concentrator array  

Science Conference Proceedings (OSTI)

A design for a photovoltaic central power station using tracking concentrators has been developed. The 100 MW plant is assumed to be located adjacent to the Saguaro Power Station of Arizona Public Service. The design assumes an advanced Martin Marietta two-axis tracking fresnel lens concentrator. The concentrators are arrayed in 5 MW subfields, each with its own power conditioning unit. The photovoltaic plant output is connected to the existing 115 kV switchyard. The site specific design allows detailed cost estimates for engineering, site preparation, and installation. Collector and power conditioning costs have been treated parametrically.

Not Available

1984-02-01T23:59:59.000Z

433

Natural convective studies within a compound parabolic concentrator enclosure  

SciTech Connect

The contribution due to natural convection within a compound parabolic concentrator enclosure has been experimentally determined. These studies have been conducted within a truncated compound parabolic concentrator having a concentration ratio of 4, a receiver width of 3.175 cm, and a length of 244.0 cm. The receiver was heated electrically while the aperture was provided with a duct that was cooled by water. The limbs of the collector were fabricated from aluminum. Temperatures were directly obtained with copper constantan thermocouples located throughout the entire enclosure and provided the basis needed to calculate the different modes of heat transfer. The constant heat flux

Tatara, R.A.

1983-01-01T23:59:59.000Z

434

Evidence of small-scale magnetic concentrations dragged by vortex motion of solar photospheric plasma  

E-Print Network (OSTI)

Vortex-type motions have been measured by tracking bright points in high-resolution observations of the solar photosphere. These small-scale motions are thought to be determinant in the evolution of magnetic footpoints and their interaction with plasma and therefore likely to play a role in heating the upper solar atmosphere by twisting magnetic flux tubes. We report the observation of magnetic concentrations being dragged towards the center of a convective vortex motion in the solar photosphere from high-resolution ground-based and space-borne data. We describe this event by analyzing a series of images at different solar atmospheric layers. By computing horizontal proper motions, we detect a vortex whose center appears to be the draining point for the magnetic concentrations detected in magnetograms and well-correlated with the locations of bright points seen in G-band and CN images.

Balmaceda, L; Palacios, J; Cabello, I; Domingo, V

2010-01-01T23:59:59.000Z

435

A concentration rebound method for measuring particle penetration and  

NLE Websites -- All DOE Office Websites (Extended Search)

A concentration rebound method for measuring particle penetration and A concentration rebound method for measuring particle penetration and deposition in the indoor environment Title A concentration rebound method for measuring particle penetration and deposition in the indoor environment Publication Type Journal Article LBNL Report Number LBNL-51631 Year of Publication 2003 Authors Thatcher, Tracy L., Melissa M. Lunden, Kenneth L. Revzan, Richard G. Sextro, and Nancy J. Brown Journal Aerosol Science & Technology Volume 37 Start Page Chapter Pagination 847-864 Abstract Continuous, size resolved particle measurements were performed in two houses in order to determine size- dependent particle penetration into and deposition in the indoor environment. The experiments consisted of three parts: measurement of the particle loss rate following artificial elevation of indoor particle concentrations,

436

An Investigation of Instantaneous Diffusion and Concentration Fluctuations  

Science Conference Proceedings (OSTI)

Instantaneous plume behavior is investigated via experimental and modeling results from a recent field campaign. The data consist of wind velocity and concentration measurements collected 700 m from a point source of sulfur hexafluoride during ...

Holly Peterson; Brian Lamb

1995-12-01T23:59:59.000Z

437

Energy Department Announces New Concentrating Solar Power Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

total projects to further advance cutting-edge concentrating solar power technologies (CSP). The awards span 13 states for a total of 56 million over three years, subject to...

438

SunLab: Advancing Concentrating Solar Power Technology  

DOE Green Energy (OSTI)

Concentrating solar power (CSP) technologies, including parabolic troughs, power towers, and dish/engines, have the potential to provide the world with tens of thousands of megawatts of clean, renewable, cost-competitive power.

NONE

1998-11-24T23:59:59.000Z

439

Atmospheric Concentrations of Submicron Contact-freezing Nuclei  

Science Conference Proceedings (OSTI)

Atmospheric concentrations of contact-freezing nuclei were measured using a technique primarily sensitive to submicron aerosol particles. Diffusion and phoretic forces were relied on for the capture of nuclei by supercooled drops of distilled ...

Terry Deshler; Gabor Vali

1992-05-01T23:59:59.000Z

440

SunShot Initiative: Low-Cost, Lightweight Solar Concentrators  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost, Lightweight Solar Concentrators Cost, Lightweight Solar Concentrators JPL logo Graphic of two dishes, mounted to the ground, that are side-by-side. This graphic shows the JPL/L'Garde lightweight concentrator facets, which are deployed for different configurations. The Jet Propulsion Laboratory (JPL), with funding from the 2012 SunShot Concentrating Solar Power (CSP) R&D FOA, is designing an optimized solar thermal collector structure using a lightweight collector structure capable of lowering structural costs, simplifying installation, and leading to mass-manufacturability. Approach The JPL project seeks to achieve the SunShot Initiative installed cost target of $75/m2 for a solar thermal collector system, as well as SunShot performance targets for optical errors, operations during windy conditions, and lifetime.

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Mirror Film Company Has 'Concentrated' Plans for Expansion | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mirror Film Company Has 'Concentrated' Plans for Expansion Mirror Film Company Has 'Concentrated' Plans for Expansion Mirror Film Company Has 'Concentrated' Plans for Expansion September 10, 2010 - 1:19pm Addthis Lorelei Laird Writer, Energy Empowers In concentrating solar power, glass is king-but it's fighting to hold on to its crown. The reflectivity of glass mirrors makes them a great choice for focusing sunlight onto a heat generator. However, the glass mirrors can be expensive and heavy -- reducing their ability to compete with conventional energy sources. ReflecTech Inc. has an option: a silvered polymer-based film that does the same job, but with half the weight and cost. Using that film, the company can make 100,000 square feet of mirror panels per year at its factory in Arvada, Colo. Through an Advanced Manufacturing 48C tax credit through the Recovery Act,

442

SunShot Concentrating Solar Power Program Review 2013 - About...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SunShot Concentrating Solar Power Program Review 2013 April 23-25, 2013 Phoenix, Arizona Skip navigation to main content Menu Home About Agenda Register Venue Presentations About...

443

SunShot Concentrating Solar Power Program Review 2013 - Travel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SunShot Concentrating Solar Power Program Review 2013 April 23-25, 2013 Phoenix, Arizona Skip navigation to main content Menu Home About Agenda Register Venue Presentations Travel...

444

SunShot Concentrating Solar Power Program Review 2013 - Hotel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SunShot Concentrating Solar Power Program Review 2013 April 23-25, 2013 Phoenix, Arizona Skip navigation to main content Menu Home About Agenda Register Venue Presentations Hotel...

445

SunShot Concentrating Solar Power Program Review 2013 - Agenda  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SunShot Concentrating Solar Power Program Review 2013 April 23-25, 2013 Phoenix, Arizona Skip navigation to main content Menu Home About Agenda Register Venue Presentations Agenda...

446

Total production of uranium concentrate in the United States  

Gasoline and Diesel Fuel Update (EIA)

1. Total production of uranium concentrate in the United States, 1996 - 2nd Quarter 2013 pounds U3O8 Calendar-Year Quarter 1st Quarter 2nd Quarter 3rd Quarter 4th Quarter...

447

Energetics Responses to Increases in Greenhouse Gas Concentration  

Science Conference Proceedings (OSTI)

Increasing greenhouse gas concentrations warm the troposphere. However, it is not clear whether this implies changes in the energetics. To study the energetics responses to CO2 increases, changes in the Lorenz energy cycle (LEC) are evaluated ...

Daniel Hernández-Deckers; Jin-Song von Storch

2010-07-01T23:59:59.000Z

448

Dish/Engine Systems for Concentrating Solar Power  

Energy.gov (U.S. Department of Energy (DOE))

The dish/engine system is a concentrating solar power (CSP) technology that produces relatively small amounts of electricity compared to other CSP technologies—typically in the range of 3 to 25...

449

Characteristics of Maximum Concentrations from Multiple Point Sources  

Science Conference Proceedings (OSTI)

A simple quasi-Newton numerical scheme is applied to determine the hypothetical worst-case meteorology that will result in the maximum combined concentrations at any receptor location in air quality modeling over short distances for multiple ...

N. M. Zoumakis

1998-07-01T23:59:59.000Z

450

On the Relationship between Sulfate and Cloud Droplet Number Concentrations  

Science Conference Proceedings (OSTI)

Comparisons are drawn between the aerosol cloud microphysical theory implicit in the modeling of Kaufman et al. and the cloud droplet and cloud water sulfate concentrations of Leaitch et al. for the purpose of helping to understand the effect of ...

W. R. Leaitch; G. A. Isaac

1994-01-01T23:59:59.000Z

451

Analysis of Concentration Fluctuations from Lidar Observations of Atmospheric Plumes  

Science Conference Proceedings (OSTI)

A series of nearly instantaneous vertical cross sections of power-plant plume concentrations obtained by both airborne and ground-based lidar systems for the Electric Power Research Institute (EPRI) Plume Model Validation and Development Project ...

W. S. Lewellen; R. I. Sykes

1986-08-01T23:59:59.000Z

452

Value of Concentrating Solar Power and Thermal Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL-TP-6A2-45833 February 2010 The Value of Concentrating Solar Power and Thermal Energy Storage Ramteen Sioshansi The Ohio State University Columbus, Ohio Paul Denholm National...

453

Thermoelectrics Combined with Solar Concentration for Electrical and Thermal Cogeneration  

E-Print Network (OSTI)

a heat engine, such as a steam turbine or sterling enginethese concentrations, a steam turbine achieves roughly 25%ratio can run a steam turbine at 35-50% efficiency, with

Jackson, Philip Robert

2012-01-01T23:59:59.000Z

454

Use of compound parabolic concentrator for solar energy collection  

DOE Green Energy (OSTI)

The joint team of Argonne National Laboratory (ANL) and the University of Chicago is reporting their midyear results of a proof-of-concept investigation of the Compound Parabolic Concentrator (CPC) for solar-energy collection. The CPC is a non-imaging, optical-design concept for maximally concentrating radiant energy onto a receiver. This maximum concentration corresponds to a relative aperture (f/number) of 0.5, which is well beyond the limit for imaging collectors. We have constructed an X3 concentrating flat-plate collector 16 ft/sup 2/ in area. This collector has been tested in a trailer laboratory facility built at ANL. The optical and thermal performance of this collector was in good agreement with theory. We have constructed an X10 collector (8 ft/sup 2/) and started testing. A detailed theoretical study of the optical and thermal characteristics of the CPC design has been performed.

Rabi, A.; Sevcik, V.J.; Giugler, R.M.; Winston, R.

1974-01-01T23:59:59.000Z

455

Energy Basics: Thermal Storage Systems for Concentrating Solar...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Systems for Concentrating Solar Power One challenge facing the widespread use of solar energy is reduced or curtailed energy production when the sun sets or is blocked by clouds....

456

Concentrating Solar Power Dish/Engine System Basics | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

technologies-typically in the range of 3 to 25 kilowatts. Dishengine systems use a parabolic dish of mirrors to direct and concentrate sunlight onto a central engine that...

457

The Boulder, Colorado, Concentric Halo Display of 21 July 1986  

Science Conference Proceedings (OSTI)

An exceptional concentric halo display was observed in Boulder, Colorado, on 21 July 1986. As many as six halos were observed and photographed simultaneously between 1530 and 1945 UTC. Extensive photographic documentation (>100 photographs) ...

Paul J. Neiman

1989-03-01T23:59:59.000Z

458

Concentrating On California Solar Power | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrating On California Solar Power Concentrating On California Solar Power Concentrating On California Solar Power June 14, 2011 - 4:22pm Addthis Ginny Simmons Ginny Simmons Former Managing Editor for Energy.gov, Office of Public Affairs What will the project do? Combined, the projects are estimated to create nearly 1,800 jobs and enough energy to power more than 100,000 homes. Today, Secretary Chu announced conditional commitments for approximately $2 billion in loan guarantees to two California concentrating solar power plants. The projects are estimated to create nearly 1,800 jobs and will utilize advanced technologies which can help drive down the cost of solar power. The two plants, the Mojave Solar Project in San Bernardino County, California and the Genesis Solar Project in Riverside County, California,

459

Energy Department Announces New Concentrating Solar Power Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Concentrating Solar Power New Concentrating Solar Power Technology Investments to American Industry, Universities Energy Department Announces New Concentrating Solar Power Technology Investments to American Industry, Universities June 13, 2012 - 2:28pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - Building off investments in innovative solar photovoltaic technologies announced at the SunShot Grand Challenge Summit in Denver, Colorado earlier today, the Energy Department announced new investments for 21 total projects to further advance cutting-edge concentrating solar power technologies (CSP). The awards span 13 states for a total of $56 million over three years, subject to congressional appropriations. The research projects, conducted in partnership with private industry, national

460

Systematical Investigations of Cs - 137 Concentration in Soils in Bansko - Razlog Region  

SciTech Connect

Systematical investigations of Cs-137 concentration in soil in Bansko - Razlog region have been performed for the first time on a total area of about 40 km2. By means of high-resolution gamma-ray spectroscopy the radio-nuclide content of soil samples has been determined. The Cs-137 deposition density following the Chernobyl accident has been estimated and compared with results obtained in other countries. The additional dose rate caused by this fallout has been estimated, too.

Kostov, L. K.; Mladenov, Ml. I.; Protochristov, Ch. N.; Stoyanov, Ch. P. [Institute for Nuclear Research and Nuclear Energy, Sofia 1000 (Bulgaria); Kobilarov, R. G. [Department of Applied Physics, Technical University - Sofia, Sofia 1000 (Bulgaria); Kostova, L. G. [HPC - Bulgaria, Sofia 1000 (Bulgaria)

2007-04-23T23:59:59.000Z

Note: This page contains sample records for the topic "fahrenheit high concentration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Predicting the Potential Polychlorinated Biphenyl (PCB) Concentration in Electrical Equipment  

Science Conference Proceedings (OSTI)

Mineral oil-filled transformers and other electrical equipment manufactured before Polychlorinated Biphenyls (PCBs) were banned by the United States Environmental Protection Agency (EPA) in 1978 sometimes contain low concentrations of PCBs. Owners of mineral oil-filled transformers whose PCB concentration is not established are permitted by the EPA to assume these units are PCB-contaminated (50-499 ppm) as long as they remain in use or are stored for reuse. Many owners would benefit from knowing the ...

2012-12-31T23:59:59.000Z

462

Infiltration Effects on Residential Pollutant Concentrations for Continuous  

NLE Websites -- All DOE Office Websites (Extended Search)

Infiltration Effects on Residential Pollutant Concentrations for Continuous Infiltration Effects on Residential Pollutant Concentrations for Continuous and Intermittent Mechanical Ventilation Approaches Title Infiltration Effects on Residential Pollutant Concentrations for Continuous and Intermittent Mechanical Ventilation Approaches Publication Type Journal Article LBNL Report Number LBNL-3978E Year of Publication 2011 Authors Sherman, Max H., Jennifer M. Logue, and Brett C. Singer Journal HVAC&R Research Volume 17 Issue 2 Pagination 159 Publisher Lawrence Berkeley National Laboratory Keywords resave Abstract The prevailing residential ventilation standard in North America, American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 62.2, specifies volumetric airflow requirements as a function of the overall size of the home and the number of bedrooms, assumes a fixed, minimal amount of infiltration, and requires mechanical ventilation to achieve the remainder. The standard allows for infiltration credits and intermittent ventilation patterns that can be shown to provide comparable performance. Whole-house ventilation methods have a substantial effect on time-varying indoor pollutant concentrations. If alternatives specified by Standard 62.2, such as intermittent ventilation, are used, short-term pollutant concentrations could exceed acute health standards even if chronic health standards are met.The authors present a methodology for comparing ASHRAE- and non-ASHRAE-specified ventilation scenarios on relative indoor pollutant concentrations. We use numerical modeling to compare the maximum time-averaged concentrations for acute exposure relevant (1-hour, 8-hour, 24-hour ) and chronic exposure relevant (1-year) time periods for four different ventilation scenarios in six climates with a range of normalized leakage values. The results suggest that long-term concentrations are the most important metric for assessing the effectiveness of whole-house ventilation systems in meeting exposure standards and that, if chronic health exposure standards are met, acute standards will also be met.

463

Concentrating Solar Power Program Technology Overview (Fact Sheet)  

SciTech Connect

Concentrating solar power systems use the heat from the sun's rays to generate electricity. Reflective surfaces concentrate the sun's rays up to 10,000 times to heat a receiver filled with a heat-exchange fluid, such as oil. The heated fluid is then used to generate electricity in a steam turbine or heat engine. Mechanical drives slowly turn the reflective surfaces during the day to keep the solar radiation focused on the receiver.

Not Available

2001-04-01T23:59:59.000Z

464

Proceedings of the solar thermal concentrating collector technology symposium  

DOE Green Energy (OSTI)

The purpose of the symposium was to review the current status of the concentrating collector technology, to disseminate the information gained from experience in operating solar systems, and to highlight the significant areas of technology development that must be vigorously pursued to foster early commercialization of concentrating solar collectors. Separate abstracts were prepared for thirteen invited papers and working group summaries. Two papers were previously abstracted for EDB.

Gupta, B.P.; Kreith, F. (eds.) [eds.

1978-08-01T23:59:59.000Z

465

Evaluation tests for photovoltaic concentrator receiver sections and modules  

DOE Green Energy (OSTI)

Sandia has developed a third-generation set of specifications for performance and reliability testing of photovoltaic concentrator modules. Several new requirements have been defined. The primary purpose of the tests is to screen new concentrator designs and new production runs for susceptibility to known failure mechanisms. Ultraviolet radiation testing of materials precedes receiver section and module performance and environmental tests. The specifications include the purpose, procedure, and requirements for each test. Recommendations for future improvements are presented.

Woodworth, J.R.; Whipple, M.L.

1992-06-01T23:59:59.000Z

466

Optimal Heat Collection Element Shapes for Parabolic Trough Concentrators  

DOE Green Energy (OSTI)

For nearly 150 years, the cross section of the heat collection tubes used at the focus of parabolic trough solar concentrators has been circular. This type of tube is obviously simple and easily fabricated, but it is not optimal. It is shown in this article that the optimal shape, assuming a perfect parabolic figure for the concentrating mirror, is instead oblong, and is approximately given by a pair of facing parabolic segments.

Bennett, C

2007-11-15T23:59:59.000Z

467

Maximally concentrating optics for photovoltaic solar energy conversion  

DOE Green Energy (OSTI)

Use of a two-stage concentrator with a fresnel lens primary and a nonimaging dielectric totally internally reflecting secondary, has unique advantages for photovoltaic concentration. Some preliminary ray trace studies have shown that with planar lenses, an increase in angular acceptance for a given geometric concentration to about 2/3 of the maximum theoretical limit can be achieved. To demonstrate this, two preprototype concentrators, each having a geometric concentration of 248:1 for a 0.635cm (0.25 inch) diameter cell, have been designed, built, and tested. Measurements of the angular response show an acceptance of 8[degrees] (full angle) which is drastically better than the 1[degrees]--2[degrees] achievable without a secondary, and is in excellent agreement with the ray trace predictions. For these preprototypes, passive cooling was sufficient to prevent any thermal problems for both the cell and secondary. No problems associated with nouuniform cell illumination were found, as evidenced by the fill factor of 71%--73% measured under concentration. Initial measurements of the system electrical efficiency lie in the range 7.5%--9.9% for a variety of individual cells.

O'Gallagher, J.J.

1985-03-07T23:59:59.000Z

468

High PRF high current switch  

DOE Green Energy (OSTI)

A triggerable, high voltage, high current, spark gap switch for use in pu power systems. The device comprises a pair of electrodes in a high pressure hydrogen environment that is triggered by introducing an arc between one electrode and a trigger pin. Unusually high repetition rates may be obtained by undervolting the switch, i.e., operating the trigger at voltages much below the self-breakdown voltage of the device.

Moran, Stuart L. (Fredericksburg, VA); Hutcherson, R. Kenneth (College Park, MD)

1990-03-27T23:59:59.000Z

469

High Performance Material & Assemblies for a Sustainable Built ...  

Science Conference Proceedings (OSTI)

Environmental Assessment of Li-CNT Battery Production ... The Production of High-Quality Magnesite Ore Concentrate With Permroll Type Magnetic Separator.

470

Liquid Metal, a Heat Transport Fluid for High Temperature Solar ...  

Science Conference Proceedings (OSTI)

The need for high efficiency and direct heat conversion into hydrogen, process heat and energy storage pushes the temperature for solar concentrator systems.

471

Design of the support structure, drive pedestal, and controls for a solar concentrator  

SciTech Connect

The glass/metal McDonnell-Douglas dish is the state-of-the-art of parabolic dish concentrators. Because of the perceived high production cost of this concentrator, the Department of Energy's Solar Thermal Program is developing stretch-membrane technology for large (75 kWt) solar concentrators for integration with receivers and engines in 25 kWe dish-Stirling systems. The objective of this development effort is to reduce the cost of the concentrator while maintaining the high levels of performance characteristic of glass-metal dishes. Under contract to Sandia National Laboratories, Science Applications International Corporation, Solar Kinetics Inc. and WG Associates are developing a faceted stretched-membrane heliostat technology. This design will result in a low-risk, near-term concentrator for dish-Stirling systems. WG Associates has designed the support structure, drives and tracking controls for this dish. The structure is configured to support 12 stretched-membrane, 3.5-meter diameter facets in a shaped dish configuration. The dish design is sized to power a dish-Stirling system capable of producing 25 kW (electric). In the design of the structure, trade-off studies were conducted to determine the best'' facet arrangement, dish contour, dish focal length, tracking control and walk-off protection. As part of the design, in-depth analyses were performed to evaluate pointing accuracy, compliance with AISC steel design codes, and the economics of fabrication and installation. Detailed fabrication and installation drawings were produced, and initial production cost estimates for the dish were developed. These issues, and the final dish design, are presented in this report. 7 refs., 33 figs., 18 tabs.

Goldberg, V.R.; Ford, J.L.; Anderson, A.E. (WG Associates, Dallas, TX (United States))

1991-08-01T23:59:59.000Z

472

Concentrating aqueous volatile fatty acid salt solutions using a tertiary amine mixture  

E-Print Network (OSTI)

Lee (1993) has shown that tertiary amines are able to hics. extract water from low-concentration calcium acetate and sodium acetate solutions. This thesis extends the previous work to include calcium propionate and butyrate. Amine extraction may be used to selectively remove water from a fermentation broth thus concentrating calcium acetate, propionate, and butyrate. Compared to competing technologies that extract undissociated acids from a volatile fatty acid fermentation broth, extracting water with tertiary amines allows for higher pH levels in the broth resulting in greater productivity. Specifically, triethylamine and N,N-diethyl-methylamine in a 1:2 volumetric mixture are superior to any other examined mixture or single amine for extracting water at 40[]C, the proposed fermentation temperature (Lee, 1993; Davison et al., 1966, 1967). Once the acid salts have been concentrated, a variety of techniques are available to convert the concentrated salts into other products such as ketones, alcohols, and acids. At low temperatures, the low-molecular-weight amine mixture has a high affinity for water. By raising the temperature 20 to 25[]C, the water separates from the amine allowing for convenient solvent regeneration of the amine. The distribution coefficients, [] , measure the selectivity of concentrating calcium salts in the aqueous phase. The distribution coefficients generally vary as follows: [] thus, there is less selectivity as the aliphatic group increases in size. The amine mixture was used to extract water from actual fermentation broth to determine whether possible surfactants in the broth interfere with the extraction. Prior to extraction, the fermentation broth was adjusted to pH 11.5 by adding a small amount of lime. The high pH precipitate protein which can be recycled to the fermentor or collected for animal feed. Through 15 extraction runs, no degradation of the amine was observed.

Gaskin, David J

1997-01-01T23:59:59.000Z

473

Design of the support structure, drive pedestal, and controls for a solar concentrator  

DOE Green Energy (OSTI)

The glass/metal McDonnell-Douglas dish is the state-of-the-art of parabolic dish concentrators. Because of the perceived high production cost of this concentrator, the Department of Energy's Solar Thermal Program is developing stretch-membrane technology for large (75 kWt) solar concentrators for integration with receivers and engines in 25 kWe dish-Stirling systems. The objective of this development effort is to reduce the cost of the concentrator while maintaining the high levels of performance characteristic of glass-metal dishes. Under contract to Sandia National Laboratories, Science Applications International Corporation, Solar Kinetics Inc. and WG Associates are developing a faceted stretched-membrane heliostat technology. This design will result in a low-risk, near-term concentrator for dish-Stirling systems. WG Associates has designed the support structure, drives and tracking controls for this dish. The structure is configured to support 12 stretched-membrane, 3.5-meter diameter facets in a shaped dish configuration. The dish design is sized to power a dish-Stirling system capable of producing 25 kW (electric). In the design of the structure, trade-off studies were conducted to determine the best'' facet arrangement, dish contour, dish focal length, tracking control and walk-off protection. As part of the design, in-depth analyses were performed to evaluate pointing accuracy, compliance with AISC steel design codes, and the economics of fabrication and installation. Detailed fabrication and installation drawings were produced, and initial production cost estimates for the dish were developed. These issues, and the final dish design, are presented in this report. 7 refs., 33 figs., 18 tabs.

Goldberg, V.R.; Ford, J.L.; Anderson, A.E. (WG Associates, Dallas, TX (United States))

1991-08-01T23:59:59.000Z

474

Potentiometric Sensor for Real-Time Monitoring of Multivalent Ion Concentrations in Molten Salt  

SciTech Connect

Electrorefining of spent metallic nuclear fuel in high temperature molten salt systems is a core technology in pyroprocessing, which in turn plays a critical role in the development of advanced fuel cycle technologies. In electrorefining, spent nuclear fuel is treated electrochemically in order to effect separations between uranium, noble metals, and active metals, which include the transuranics. The accumulation of active metals in a lithium chloride-potassium chloride (LiCl-KCl) eutectic molten salt electrolyte occurs at the expense of the UCl3-oxidant concentration in the electrolyte, which must be periodically replenished. Our interests lie with the accumulation of active metals in the molten salt electrolyte. The real-time monitoring of actinide concentrations in the molten salt electrolyte is highly desirable for controlling electrochemical operations and assuring materials control and accountancy. However, real-time monitoring is not possible with current methods for sampling and chemical analysis. A new solid-state electrochemical sensor is being developed for real-time monitoring of actinide ion concentrations in a molten salt electrorefiner. The ultimate function of the sensor is to monitor plutonium concentrations during electrorefining operations, but in this work gadolinium was employed as a surrogate material for plutonium. In a parametric study, polycrystalline sodium beta double-prime alumina (Na-ß?-alumina) discs and tubes were subject to vapor-phase exchange with gadolinium ions (Gd3+) using a gadolinium chloride salt (GdCl3) as a precursor to produce gadolinium beta double-prime alumina (Gd-ß?-alumina) samples. Electrochemical impedance spectroscopy and microstructural analysis were performed on the ion-exchanged discs to determine the relationship between ion exchange and Gd3+ ion conductivity. The ion-exchanged tubes were configured as potentiometric sensors in order to monitor real-time Gd3+ ion concentrations in mixtures of gadolinium chloride (GdCl3) in LiCl-KCl eutectic molten salts through measurement of the potential difference between a reference and working electrode.

Peter A. Zink; Jan-Fong Jue; Brenda E. Serrano; Guy L. Fredrickson; Ben F. Cowan; Steven D. Herrmann; Shelly X. Li

2010-07-01T23:59:59.000Z

475

Phase Change Materials for Thermal Energy Storage in Concentrated Solar Thermal Power Plants  

E-Print Network (OSTI)

PHASE CHANGE THERMAL ENERGY STORAGE FOR CONCENTRATING SOLARChange Materials for Thermal Energy Storage in ConcentratedChange Materials for Thermal Energy Storage in Concentrated

Hardin, Corey Lee

2011-01-01T23:59:59.000Z

476

Phase Change Materials for Thermal Energy Storage in Concentrated Solar Thermal Power Plants  

E-Print Network (OSTI)

PHASE CHANGE THERMAL ENERGY STORAGE FOR CONCENTRATING SOLARMaterials for Thermal Energy Storage in Concentrated SolarMaterials for Thermal Energy Storage in Concentrated Solar

Hardin, Corey Lee

2011-01-01T23:59:59.000Z

477

High speed flywheel  

DOE Patents (OSTI)

A flywheel for operation at high speeds utilizes two or more ringlike coments arranged in a spaced concentric relationship for rotation about an axis and an expansion device interposed between the components for accommodating radial growth of the components resulting from flywheel operation. The expansion device engages both of the ringlike components, and the structure of the expansion device ensures that it maintains its engagement with the components. In addition to its expansion-accommodating capacity, the expansion device also maintains flywheel stiffness during flywheel operation.

McGrath, Stephen V. (Knoxville, TN)

1991-01-01T23:59:59.000Z

478

High-flux solar photon processes  

DOE Green Energy (OSTI)

This study was commissioned by the National Renewable Energy Laboratory (NREL) for the purpose of identifying high-flux photoprocesses that would lead to beneficial national and commercial applications. The specific focus on high-flux photoprocesses is based on the recent development by NREL of solar concentrator technology capable of delivering record flux levels. We examined photolytic and photocatalytic chemical processes as well as photothermal processes in the search for processes where concentrated solar flux would offer a unique advantage. 37 refs.

Lorents, D C; Narang, S; Huestis, D C; Mooney, J L; Mill, T; Song, H K; Ventura, S [SRI International, Menlo Park, CA (United States)

1992-06-01T23:59:59.000Z

479

Development and testing of Parabolic Dish Concentrator No. 1  

DOE Green Energy (OSTI)

Parabolic Dish Concentrator No. 1 (PDC-1) is a 12-m-diameter prototype concentrator that evolved from a six-year effort to produce a unit with low life-cycle costs for use with thermal-to-electric energy conversion devices. The concentrator assembly features panels made of a resin transfer molded balsa core/fiberglass sandwich with plastic reflective film as the reflective surface and a ribbed framework to hold the panels in place. The concentrator assembly tracks in azimuth and elevation on a base frame riding on a circular track. In 1982, PDC-1 was installed at the Jet Propulsion Laboratory's Parabolic Dish Test Site at Edwards Air Force Base, California. Initial optical testing showed that the panels did not exhibit the proper parabolic contour. After reassembly to correct this problem, further optical testing discovered thermal gradients in the panels with daily temperature changes. In spite of this, PDC-1 has sufficient optical quality to operate satisfactorily in a dish-electric system. With suggested improvements, its performance could be increased. The PDC-1 development effort provided the impetus for creating innovative optical testing methods and also provided valuable information for use in designing and fabricating concentrators of future dish-electric systems.

Dennison, E.W.; Thostesen, T.O.

1984-12-15T23:59:59.000Z

480

NREL: Concentrating Solar Power Research - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us NREL's interaction with industrial, university, and government partners is the key to moving advanced concentrating solar power technologies into the marketplace and the U.S. economy. We provide opportunities to develop technology partnerships, license our technology, and use our facilities. Developing Technology Partnerships NREL offers a variety of technology partnership agreements to help you gain access to our research expertise in concentrating solar power, including our laboratory and modeling and analysis capabilities. You can: Work collaboratively with us on a concentrating solar power research project through a Cooperative Research and Development Agreement Pay NREL to conduct research without your collaboration through a Work-for-Others agreement.