National Library of Energy BETA

Sample records for factors exposure factors

  1. Patient-based radiographic exposure factor selection: a systematic review

    SciTech Connect (OSTI)

    Ching, William; Robinson, John; McEntee, Mark

    2014-09-15

    Digital technology has wider exposure latitude and post-processing algorithms which can mask the evidence of underexposure and overexposure. Underexposure produces noisy, grainy images which can impede diagnosis and overexposure results in a greater radiation dose to the patient. These exposure errors can result from inaccurate adjustment of exposure factors in response to changes in patient thickness. This study aims to identify all published radiographic exposure adaptation systems which have been, or are being, used in general radiography and discuss their applicability to digital systems. Studies in EMBASE, MEDLINE, CINAHL and SCOPUS were systematically reviewed. Some of the search terms used were exposure adaptation, exposure selection, exposure technique, 25% rule, 15% rule, DuPont™ Bit System and radiography. A manual journal-specific search was also conducted in The Radiographer and Radiologic Technology. Studies were included if they demonstrated a system of altering exposure factors to compensate for variations in patients for general radiography. Studies were excluded if they focused on finding optimal exposures for an ‘average’ patient or focused on the relationship between exposure factors and dose. The database search uncovered 11 articles and the journal-specific search uncovered 13 articles discussing systems of exposure adaptation. They can be categorised as simple one-step guidelines, comprehensive charts and computer programs. Only two papers assessed the efficacy of exposure adjustment systems. No literature compares the efficacy of exposure adaptations system for film/screen radiography with digital radiography technology nor is there literature on a digital specific exposure adaptation system.

  2. Douglas Factors

    Broader source: Energy.gov [DOE]

    The Merit Systems Protection Board in its landmark decision, Douglas vs. Veterans Administration, 5 MSPR 280, established criteria that supervisors must consider in determining an appropriate penalty to impose for an act of employee misconduct. These twelve factors are commonly referred to as “Douglas Factors” and have been incorporated into the Federal Aviation Administration (FAA) Personnel Management System and various FAA Labor Agreements.

  3. Reducing Power Factor Cost

    Broader source: Energy.gov [DOE]

    Low power factor is expensive and inefficient. Many utility companies charge an additional fee if your power factor is less than 0.95. Low power factor also reduces your electrical system’s distribution capacity by increasing current flow and causing voltage drops. This fact sheet describes power factor and explains how you can improve your power factor to reduce electric bills and enhance your electrical system’s capacity.

  4. Land and Water Use, CO2 Emissions, and Worker Radiological Exposure Factors for the Nuclear Fuel Cycle

    SciTech Connect (OSTI)

    Brett W Carlsen; Brent W Dixon; Urairisa Pathanapirom; Eric Schneider; Bethany L. Smith; Timothy M. AUlt; Allen G. Croff; Steven L. Krahn

    2013-08-01

    The Department of Energy Office of Nuclear Energy’s Fuel Cycle Technologies program is preparing to evaluate several proposed nuclear fuel cycle options to help guide and prioritize Fuel Cycle Technology research and development. Metrics are being developed to assess performance against nine evaluation criteria that will be used to assess relevant impacts resulting from all phases of the fuel cycle. This report focuses on four specific environmental metrics. • land use • water use • CO2 emissions • radiological Dose to workers Impacts associated with the processes in the front-end of the nuclear fuel cycle, mining through enrichment and deconversion of DUF6 are summarized from FCRD-FCO-2012-000124, Revision 1. Impact estimates are developed within this report for the remaining phases of the nuclear fuel cycle. These phases include fuel fabrication, reactor construction and operations, fuel reprocessing, and storage, transport, and disposal of associated used fuel and radioactive wastes. Impact estimates for each of the phases of the nuclear fuel cycle are given as impact factors normalized per unit process throughput or output. These impact factors can then be re-scaled against the appropriate mass flows to provide estimates for a wide range of potential fuel cycles. A companion report, FCRD-FCO-2013-000213, applies the impact factors to estimate and provide a comparative evaluation of 40 fuel cycles under consideration relative to these four environmental metrics.

  5. Reducing Power Factor Cost

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The presence of both in the same circuit results in the continuous alternating transfer of ... In the diagram below, the power triangle shows an initial 0.70 power factor for a 100-kW ...

  6. FGF growth factor analogs

    DOE Patents [OSTI]

    Zamora, Paul O.; Pena, Louis A.; Lin, Xinhua; Takahashi, Kazuyuki

    2012-07-24

    The present invention provides a fibroblast growth factor heparin-binding analog of the formula: ##STR00001## where R.sub.1, R.sub.2, R.sub.3, R.sub.4, R.sub.5, X, Y and Z are as defined, pharmaceutical compositions, coating compositions and medical devices including the fibroblast growth factor heparin-binding analog of the foregoing formula, and methods and uses thereof.

  7. Multi-factor authentication

    DOE Patents [OSTI]

    Hamlet, Jason R; Pierson, Lyndon G

    2014-10-21

    Detection and deterrence of spoofing of user authentication may be achieved by including a cryptographic fingerprint unit within a hardware device for authenticating a user of the hardware device. The cryptographic fingerprint unit includes an internal physically unclonable function ("PUF") circuit disposed in or on the hardware device, which generates a PUF value. Combining logic is coupled to receive the PUF value, combines the PUF value with one or more other authentication factors to generate a multi-factor authentication value. A key generator is coupled to generate a private key and a public key based on the multi-factor authentication value while a decryptor is coupled to receive an authentication challenge posed to the hardware device and encrypted with the public key and coupled to output a response to the authentication challenge decrypted with the private key.

  8. Geothermal Plant Capacity Factors

    SciTech Connect (OSTI)

    Greg Mines; Jay Nathwani; Christopher Richard; Hillary Hanson; Rachel Wood

    2015-01-01

    The capacity factors recently provided by the Energy Information Administration (EIA) indicated this plant performance metric had declined for geothermal power plants since 2008. Though capacity factor is a term commonly used by geothermal stakeholders to express the ability of a plant to produce power, it is a term frequently misunderstood and in some instances incorrectly used. In this paper we discuss how this capacity factor is defined and utilized by the EIA, including discussion on the information that the EIA requests from operations in their 923 and 860 forms that are submitted both monthly and annually by geothermal operators. A discussion is also provided regarding the entities utilizing the information in the EIA reports, and how those entities can misinterpret the data being supplied by the operators. The intent of the paper is to inform the facility operators as the importance of the accuracy of the data that they provide, and the implications of not providing the correct information.

  9. Radiation View Factor With Shadowing

    Energy Science and Technology Software Center (OSTI)

    1992-02-24

    FACET calculates the radiation geometric view factor (alternatively called shape factor, angle factor, or configuration factor) between surfaces for axisymmetric, two-dimensional planar and three-dimensional geometries with interposed third surface obstructions. FACET was developed to calculate view factors as input data to finite element heat transfer analysis codes.

  10. Inelastic Scattering Form Factors

    Energy Science and Technology Software Center (OSTI)

    1992-01-01

    ATHENA-IV computes form factors for inelastic scattering calculations, using single-particle wave functions that are eigenstates of motion in either a Woods-Saxon potential well or a harmonic oscillator well. Two-body forces of Gauss, Coulomb, Yukawa, and a sum of cut-off Yukawa radial dependences are available.

  11. ERYTHROPOIETIC FACTOR PURIFICATION

    DOE Patents [OSTI]

    White, W.F.; Schlueter, R.J.

    1962-05-01

    A method is given for purifying and concentrating the blood plasma erythropoietic factor. Anemic sheep plasma is contacted three times successively with ion exchange resins: an anion exchange resin, a cation exchange resin at a pH of about 5, and a cation exchange resin at a pH of about 6. (AEC)

  12. Two-Factor Authentication

    Broader source: Energy.gov [DOE]

    Two-Factor Authentication (2FA) (also known as 2-Step Verification) is a system that employs two methods to identify an individual. More secure than reusable passwords, when a token's random number...

  13. Anthrax Lethal Factor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thiang Yian Wong, Robert Schwarzenbacher and Robert C. Liddington The Burnham Institute, 10901 North Torrey Pines Road, La Jolla, CA 92037. Anthrax Toxin is a major virulence factor in the infectious disease, Anthrax1. This toxin is produced by Bacillus anthracis, which is an encapsulated, spore-forming, rod-shaped bacterium. Inhalation anthrax, the most deadly form, is contracted through breathing spores. Once spores germinate within cells of the immune system called macrophages2, bacterial

  14. The MX Factor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MX Factor Test films played a strategic-planning role in the debates of the late 1970s and early 1980s about where and how to deploy the MX intercontinental ballistic missile (LGM-118 Peacekeeper). The deployment would have to ensure that the missiles could survive a first strike by an adversary. Military planners were considering placing the missiles in clusters of hardened concrete shelters in the hot, dry Great Basin Desert of Nevada and Utah. Films of atmospheric tests at the Nevada Test

  15. Nucleon Electromagnetic Form Factors

    SciTech Connect (OSTI)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  16. Characteristics RSE Column Factor: Total

    U.S. Energy Information Administration (EIA) Indexed Site

    and 1994 Vehicle Characteristics RSE Column Factor: Total 1993 Family Income Below Poverty Line Eli- gible for Fed- eral Assist- ance 1 RSE Row Factor: Less than 5,000 5,000...

  17. Factors Affecting PMU Installation Costs

    Broader source: Energy.gov (indexed) [DOE]

    ... information to improve the modeling, forecasting and controls of the grid Standards ... Department of Energy |September 2014 Factors Affecting PMU Installation Costs | Page 3 ...

  18. Factor CO2 | Open Energy Information

    Open Energy Info (EERE)

    Factor CO2 Jump to: navigation, search Name: Factor CO2 Place: Bilbao, Spain Zip: 48008 Product: Spain-based consultancy specializing in climate change projects. References: Factor...

  19. Human Factors Engineering Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2002-03-04

    HFE-AT is a human factors engineering (HFE) software analysis tool (AT) for human-system interface design of process control systems, and is based primarily on NUREG-0700 guidance.

  20. Factorization, power corrections, and the pion form factor

    SciTech Connect (OSTI)

    Rothstein, Ira Z.

    2004-09-01

    This paper is an investigation of the pion form factor utilizing recently developed effective field theory techniques. The primary results reported are both the transition and electromagnetic form factors are corrected at order {lambda}/Q due to time ordered products which account for deviations of the pion from being a state composed purely of highly energetic collinear quarks in the lab frame. The usual higher twist wave function corrections contribute only at order {lambda}{sup 2}/Q{sup 2}, when the quark mass vanishes. In the case of the electromagnetic form factor the {lambda}/Q power correction is enhanced by a power of 1/{alpha}{sub s}(Q) relative to the leading order result of Brodsky and Lepage, if the scale {radical}({lambda}Q) is nonperturbative. This enhanced correction could explain the discrepancy with the data.

  1. Neurobehavioral impairments, generation of oxidative stress and release of pro-apoptotic factors after chronic exposure to sulphur mustard in mouse brain

    SciTech Connect (OSTI)

    Sharma, Deep Raj; Sunkaria, Aditya; Bal, Amanjit; Bhutia, Yangchen D.; Vijayaraghavan, R.; Flora, S.J.S.; Gill, Kiran Dip

    2009-10-15

    Recent global events have focused attention on the potential threat of international and domestic chemical terrorism, as well as the possibility of chemical warfare proliferation. Sulphur mustard (SM) is one of the potent chemical warfare agents (CWA), which initiates a cascade of events that converge on the redox mechanisms common to brain injury. The present study was designed to examine the effects of chronic SM exposure on neurobehavioral impairments, mitochondrial oxidative stress in male Swiss Albino mice and its role in inducing apoptotic neuronal cell death. The animals were divided into four groups (control, low, medium and high dose) of 5 animals each. Exposure to SM was given percutaneously daily for 12 weeks. The results demonstrated impairment in neurobehavioral indices viz. rota rod, passive avoidance and water maze tests in a dose dependent manner. There was a significant increase in lipid peroxidation and protein carbonyl content whereas, decrease in the activity of manganese superoxide dismutase (MnSOD), glutathione reductase and glutathione peroxidase suggesting impaired antioxidant defense system. Immunoblotting of cytochrome c, Bcl-2, Bax and activation of caspase-3 suggest induction of apoptosis in a dose dependent manner. Finally, increased p53 expression suggests that it may target the mitochondrial pathway for inducing apoptosis in response to DNA damage signals. In conclusion, chronic SM exposure may have the potential to generate oxidative stress which may trigger the release of cytochrome c as well as caspase-3 activation in neurons leading to cell death by apoptosis in a dose dependent manner which may in the end be responsible for the disruption of cognitive functions in mice.

  2. Transcription factor-based biosensor

    DOE Patents [OSTI]

    2013-10-08

    The present invention provides for a system comprising a BmoR transcription factor, a .sigma..sup.54-RNA polymerase, and a pBMO promoter operatively linked to a reporter gene, wherein the pBMO promoter is capable of expression of the reporter gene with an activated form of the BmoR and the .sigma..sup.54-RNA polymerase.

  3. Human factors in software development

    SciTech Connect (OSTI)

    Curtis, B.

    1986-01-01

    This book presents an overview of ergonomics/human factors in software development, recent research, and classic papers. Articles are drawn from the following areas of psychological research on programming: cognitive ergonomics, cognitive psychology, and psycholinguistics. Topics examined include: theoretical models of how programmers solve technical problems, the characteristics of programming languages, specification formats in behavioral research and psychological aspects of fault diagnosis.

  4. Derivation of dose conversion factors for tritium

    SciTech Connect (OSTI)

    Killough, G. G.

    1982-03-01

    For a given intake mode (ingestion, inhalation, absorption through the skin), a dose conversion factor (DCF) is the committed dose equivalent to a specified organ of an individual per unit intake of a radionuclide. One also may consider the effective dose commitment per unit intake, which is a weighted average of organ-specific DCFs, with weights proportional to risks associated with stochastic radiation-induced fatal health effects, as defined by Publication 26 of the International Commission on Radiological Protection (ICRP). This report derives and tabulates organ-specific dose conversion factors and the effective dose commitment per unit intake of tritium. These factors are based on a steady-state model of hydrogen in the tissues of ICRP's Reference Man (ICRP Publication 23) and equilibrium of specific activities between body water and other tissues. The results differ by 27 to 33% from the estimate on which ICRP Publication 30 recommendations are based. The report also examines a dynamic model of tritium retention in body water, mineral bone, and two compartments representing organically-bound hydrogen. This model is compared with data from human subjects who were observed for extended periods. The manner of combining the dose conversion factors with measured or model-predicted levels of contamination in man's exposure media (air, drinking water, soil moisture) to estimate dose rate to an individual is briefly discussed.

  5. Tetrahydroquinoline Derivatives as Potent and Selective Factor...

    Office of Scientific and Technical Information (OSTI)

    as Potent and Selective Factor XIa Inhibitors Citation Details In-Document Search Title: Tetrahydroquinoline Derivatives as Potent and Selective Factor XIa Inhibitors Authors: ...

  6. Structural basis for Tetrahymena telomerase processivity factor...

    Office of Scientific and Technical Information (OSTI)

    factor Teb1 binding to single-stranded telomeric-repeat DNA Citation Details In-Document Search Title: Structural basis for Tetrahymena telomerase processivity factor Teb1 ...

  7. IPCC Emission Factor Database | Open Energy Information

    Open Energy Info (EERE)

    Emission Factor Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: IPCC Emission Factor Database AgencyCompany Organization: World Meteorological Organization,...

  8. Factors Impacting Decommissioning Costs - 13576

    SciTech Connect (OSTI)

    Kim, Karen; McGrath, Richard

    2013-07-01

    The Electric Power Research Institute (EPRI) studied United States experience with decommissioning cost estimates and the factors that impact the actual cost of decommissioning projects. This study gathered available estimated and actual decommissioning costs from eight nuclear power plants in the United States to understand the major components of decommissioning costs. Major costs categories for decommissioning a nuclear power plant are removal costs, radioactive waste costs, staffing costs, and other costs. The technical factors that impact the costs were analyzed based on the plants' decommissioning experiences. Detailed cost breakdowns by major projects and other cost categories from actual power plant decommissioning experiences will be presented. Such information will be useful in planning future decommissioning and designing new plants. (authors)

  9. Human factors in waste management

    SciTech Connect (OSTI)

    Moray, N.

    1994-10-01

    This article examines the role of human factors in radioactive waste management. Although few problems and ergonomics are special to radioactive waste management, some problems are unique especially with long term storage. The entire sociotechnical system must be looked at in order to see where improvement can take place because operator errors, as seen in Chernobyl and Bhopal, are ultimately the result of management errors.

  10. Cone Penetrometer N Factor Determination Testing Results

    SciTech Connect (OSTI)

    Follett, Jordan R.

    2014-03-05

    This document contains the results of testing activities to determine the empirical 'N Factor' for the cone penetrometer in kaolin clay simulant. The N Factor is used to releate resistance measurements taken with the cone penetrometer to shear strength.

  11. Clothes Washer Test Cloth Correction Factor Information

    Broader source: Energy.gov [DOE]

    This page contains the information used to determine the test cloth correction factors for each test cloth lot.

  12. Human factors: a necessary tool for industry

    SciTech Connect (OSTI)

    Starcher, K.O.

    1984-03-09

    The need for human factors (ergonomics) input in the layout of a ferroelectric ceramics laboratory is presented as an example of the overall need for human factors professionals in industry. However, even in the absence of one trained in human factors, knowledge of a few principles in ergonomics will provide many possibilities for improving performance in the industrial environment.

  13. Antenna factorization in strongly ordered limits

    SciTech Connect (OSTI)

    Kosower, David A.

    2005-02-15

    When energies or angles of gluons emitted in a gauge-theory process are small and strongly ordered, the emission factorizes in a simple way to all orders in perturbation theory. I show how to unify the various strongly ordered soft, mixed soft-collinear, and collinear limits using antenna factorization amplitudes, which are generalizations of the Catani-Seymour dipole factorization function.

  14. Factors fragmenting the Russian Federation

    SciTech Connect (OSTI)

    Brown, E.

    1993-10-06

    This paper examines the factors that threaten the future of the Russian Federation (RF). The observations are based on a study that focused on eight republics: Mordova, Udmurtia, Tatarstan, Mari El, Bashkortostan, Kabardino-Balkaria, Buryatia, and Altay Republic. These republics were selected for their geographic and economic significance to the RF. Tatarstan, Bashkortostan, Udmurtia, and Mari El are located on important supply routes, such as the Volga River and the trans-Siberian railroad. Some of these republics are relatively wealthy, with natural resources such as oil (e.g., Tatarstan and Bashkortostan), and all eight republics play significant roles in the military-industrial complex. The importance of these republics to the RF contrasts to the relative insignificance of the independence-minded Northern Caucasus area. The author chose not to examine the Northern Caucasus region (except Kabardino-Balkaria) because these republics may have only a minor impact on the rest of the RF if they secede. Their impact would be minimized because they lie on the frontiers of the RF. Many Russians believe that {open_quotes}it might be best to let such a troublesome area secede.{close_quotes}

  15. Factorization using the quadratic sieve algorithm

    SciTech Connect (OSTI)

    Davis, J.A.; Holdridge, D.B.

    1983-01-01

    Since the cryptosecurity of the RSA two key cryptoalgorithm is no greater than the difficulty of factoring the modulus (product of two secret primes), a code that implements the Quadratic Sieve factorization algorithm on the CRAY I computer has been developed at the Sandia National Laboratories to determine as sharply as possible the current state-of-the-art in factoring. Because all viable attacks on RSA thus far proposed are equivalent to factorization of the modulus, sharper bounds on the computational difficulty of factoring permit improved estimates for the size of RSA parameters needed for given levels of cryptosecurity. Analysis of the Quadratic Sieve indicates that it may be faster than any previously published general purpose algorithm for factoring large integers. The high speed of the CRAY I coupled with the capability of the CRAY to pipeline certain vectorized operations make this algorithm (and code) the front runner in current factoring techniques.

  16. Factorization using the quadratic sieve algorithm

    SciTech Connect (OSTI)

    Davis, J.A.; Holdridge, D.B.

    1983-12-01

    Since the cryptosecurity of the RSA two key cryptoalgorithm is no greater than the difficulty of factoring the modulus (product of two secret primes), a code that implements the Quadratic Sieve factorization algorithm on the CRAY I computer has been developed at the Sandia National Laboratories to determine as sharply as possible the current state-of-the-art in factoring. Because all viable attacks on RSA thus far proposed are equivalent to factorization of the modulus, sharper bounds on the computational difficulty of factoring permit improved estimates for the size of RSA parameters needed for given levels of cryptosecurity. Analysis of the Quadratic Sieve indicates that it may be faster than any previously published general purpose algorithm for factoring large integers. The high speed of the CRAY I coupled with the capability of the CRAY to pipeline certain vectorized operations make this algorithm (and code) the front runner in current factoring techniques.

  17. Synthetic heparin-binding growth factor analogs

    DOE Patents [OSTI]

    Pena, Louis A.; Zamora, Paul; Lin, Xinhua; Glass, John D.

    2007-01-23

    The invention provides synthetic heparin-binding growth factor analogs having at least one peptide chain that binds a heparin-binding growth factor receptor, covalently bound to a hydrophobic linker, which is in turn covalently bound to a non-signaling peptide that includes a heparin-binding domain. The synthetic heparin-binding growth factor analogs are useful as soluble biologics or as surface coatings for medical devices.

  18. Nonrelativistic QCD factorization and the velocity dependence...

    Office of Scientific and Technical Information (OSTI)

    CONFIGURATION; FACTORIZATION; MATRIX ELEMENTS; QUANTUM CHROMODYNAMICS; QUARKONIUM; SINGULARITY; T QUARKS; VELOCITY Word Cloud More Like This Full Text Journal Articles DOI: ...

  19. Summary - Major Risk Factors Integrated Facility Disposition...

    Office of Environmental Management (EM)

    Office of Environmental Management (DOE-EM) External Technical Review of the Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN Why DOE-EM Did...

  20. CONTROL OF MECHANICALLY ACTIVATED POLYMERSOME FUSION: FACTORS...

    Office of Scientific and Technical Information (OSTI)

    MECHANICALLY ACTIVATED POLYMERSOME FUSION: FACTORS AFFECTING FUSION. Henderson, Ian M.; Paxton, Walter F Abstract not provided. Sandia National Laboratories (SNL-NM), Albuquerque,...

  1. EcoFactor Inc | Open Energy Information

    Open Energy Info (EERE)

    Name: EcoFactor Inc Place: Millbrae, California Zip: 94030 Product: California-based home energy management service provider. Coordinates: 37.60276, -122.395444 Show Map...

  2. CONTROL OF MECHANICALLY ACTIVATED POLYMERSOME FUSION: FACTORS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Journal Article: CONTROL OF MECHANICALLY ACTIVATED POLYMERSOME FUSION: FACTORS AFFECTING FUSION. Citation Details In-Document Search Title: CONTROL OF MECHANICALLY ACTIVATED...

  3. Soliton form factors from lattice simulations

    SciTech Connect (OSTI)

    Rajantie, Arttu; Weir, David J.

    2010-12-01

    The form factor provides a convenient way to describe properties of topological solitons in the full quantum theory, when semiclassical concepts are not applicable. It is demonstrated that the form factor can be calculated numerically using lattice Monte Carlo simulations. The approach is very general and can be applied to essentially any type of soliton. The technique is illustrated by calculating the kink form factor near the critical point in 1+1-dimensional scalar field theory. As expected from universality arguments, the result agrees with the exactly calculable scaling form factor of the two-dimensional Ising model.

  4. Major Risk Factors Integrated Facility Disposition Project -...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Facility Disposition Project - Oak Ridge Major Risk Factors Integrated Facility Disposition Project - Oak Ridge Full Document and Summary Versions are available for ...

  5. Emission Factors (EMFAC) | Open Energy Information

    Open Energy Info (EERE)

    The EMission FACtors (EMFAC) model is used to calculate emission rates from all motor vehicles, such as passenger cars to heavy-duty trucks, operating on highways, freeways...

  6. Industrial Power Factor Analysis Guidebook. Electrotek Concepts...

    Office of Scientific and Technical Information (OSTI)

    low power factors, increased conductor and transformer losses, and lower voltages. Utilities must supply both active and reactive power and compensate for these losses. Power...

  7. Gauss Sum Factorization with Cold Atoms

    SciTech Connect (OSTI)

    Gilowski, M.; Wendrich, T.; Mueller, T.; Ertmer, W.; Rasel, E. M. [Institut fuer Quantenoptik, Leibniz Universitaet Hannover, Welfengarten 1, D-30167 Hannover (Germany); Jentsch, Ch. [Astrium GmbH-Satellites, 88039 Friedrichshafen (Germany); Schleich, W. P. [Institut fuer Quantenphysik, Universitaet Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany)

    2008-01-25

    We report the first implementation of a Gauss sum factorization algorithm by an internal state Ramsey interferometer using cold atoms. A sequence of appropriately designed light pulses interacts with an ensemble of cold rubidium atoms. The final population in the involved atomic levels determines a Gauss sum. With this technique we factor the number N=263193.

  8. Synthetic heparin-binding factor analogs

    DOE Patents [OSTI]

    Pena, Louis A.; Zamora, Paul O.; Lin, Xinhua; Glass, John D.

    2010-04-20

    The invention provides synthetic heparin-binding growth factor analogs having at least one peptide chain, and preferably two peptide chains branched from a dipeptide branch moiety composed of two trifunctional amino acid residues, which peptide chain or chains bind a heparin-binding growth factor receptor and are covalently bound to a non-signaling peptide that includes a heparin-binding domain, preferably by a linker, which may be a hydrophobic linker. The synthetic heparin-binding growth factor analogs are useful as pharmaceutical agents, soluble biologics or as surface coatings for medical devices.

  9. Carbon Dioxide Emission Factors for Coal

    Reports and Publications (EIA)

    1994-01-01

    The Energy Information Administration (EIA) has developed factors for estimating the amount of carbon dioxide emitted, accounting for differences among coals, to reflect the changing "mix" of coal in U.S. coal consumption.

  10. Relativistic Thomson Scatter from Factor Calculation

    Energy Science and Technology Software Center (OSTI)

    2009-11-01

    The purpose of this program is calculate the fully relativistic Thomson scatter from factor in unmagnetized plasmas. Such calculations are compared to experimental diagnoses of plasmas at such facilities as the Jupiter laser facility here a LLNL.

  11. Industrial Power Factor Analysis Guidebook. (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Power factor is a way of measuring the percentage of reactive power in an electrical system. Reactive power represents wasted energy--electricity that does no useful work because ...

  12. Nominal Performance Biosphere Dose Conversion Factor Analysis

    SciTech Connect (OSTI)

    Wasiolek, Maryla A.

    2000-12-21

    The purpose of this report was to document the process leading to development of the Biosphere Dose Conversion Factors (BDCFs) for the postclosure nominal performance of the potential repository at Yucca Mountain. BDCF calculations concerned twenty-four radionuclides. This selection included sixteen radionuclides that may be significant nominal performance dose contributors during the compliance period of up to 10,000 years, five additional radionuclides of importance for up to 1 million years postclosure, and three relatively short-lived radionuclides important for the human intrusion scenario. Consideration of radionuclide buildup in soil caused by previous irrigation with contaminated groundwater was taken into account in the BDCF development. The effect of climate evolution, from the current arid conditions to a wetter and cooler climate, on the BDCF values was evaluated. The analysis included consideration of different exposure pathway's contribution to the BDCFs. Calculations of nominal performance BDCFs used the GENII-S computer code in a series of probabilistic realizations to propagate the uncertainties of input parameters into the output. BDCFs for the nominal performance, when combined with the concentrations of radionuclides in groundwater allow calculation of potential radiation doses to the receptor of interest. Calculated estimates of radionuclide concentration in groundwater result from the saturated zone modeling. The integration of the biosphere modeling results (BDCFs) with the outcomes of the other component models is accomplished in the Total System Performance Assessment (TSPA) to calculate doses to the receptor of interest from radionuclides postulated to be released to the environment from the potential repository at Yucca Mountain.

  13. Proton form factor effects in hydrogenic atoms

    SciTech Connect (OSTI)

    Daza, F. Garcia; Kelkar, N. G.; Nowakowski, M.

    2011-10-21

    The proton structure corrections to the hyperfine splittings in electronic and muonic hydrogen are evaluated using the Breit potential with electromagnetic form factors. In contrast to other methods, the Breit equation with q{sup 2} dependent form factors is just an extension of the standard Breit equation which gives the hyperfine splitting Hamiltonian. Precise QED corrections are comparable to the structure corrections which therefore need to be evaluated ab initio.

  14. Factors affecting robust retail energy markets

    SciTech Connect (OSTI)

    Michelman, T.S.

    1999-04-01

    This paper briefly defines an active retail market, details the factors that influence market activity and their relative importance, compares activity in various retail energy markets to date, and predicts future retail energy market activity. Three primary factors translate into high market activity: supplier margins, translated into potential savings for actively shopping customers; market size; and market barriers. The author surveys activity nationwide and predicts hot spots for the coming year.

  15. Human factors evaluation of teletherapy: Literature review. Volume 5

    SciTech Connect (OSTI)

    Henriksen, K.; Kaye, R.D.; Jones, R.; Morisseau, D.S.; Serig, D.L.

    1995-07-01

    A series of human factors evaluations were undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. A team of human factors specialists, assisted by a panel of radiation oncologists, medical physicists, and radiation therapists, conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. A function and task analysis was performed initially to guide subsequent evaluations in the areas of workplace environment, system-user interfaces, procedures, training, and organizational practices. To further acquire an in-depth and up-to-date understanding of the practice of teletherapy in support of these evaluations, a systematic literature review was conducted. Factors that have a potential impact on the accuracy of treatment delivery were of primary concern. The present volume is the literature review. The volume starts with an overview of the multiphased nature of teletherapy, and then examines the requirement for precision, the increasing role of quality assurance, current conceptualizations of human error, and the role of system factors such as the workplace environment, user-system interfaces, procedures, training, and organizational practices.

  16. Communication-avoiding symmetric-indefinite factorization

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ballard, Grey Malone; Becker, Dulcenia; Demmel, James; Dongarra, Jack; Druinsky, Alex; Peled, Inon; Schwartz, Oded; Toledo, Sivan; Yamazaki, Ichitaro

    2014-11-13

    We describe and analyze a novel symmetric triangular factorization algorithm. The algorithm is essentially a block version of Aasen's triangular tridiagonalization. It factors a dense symmetric matrix A as the product A=PLTLTPT where P is a permutation matrix, L is lower triangular, and T is block tridiagonal and banded. The algorithm is the first symmetric-indefinite communication-avoiding factorization: it performs an asymptotically optimal amount of communication in a two-level memory hierarchy for almost any cache-line size. Adaptations of the algorithm to parallel computers are likely to be communication efficient as well; one such adaptation has been recently published. As a result,more » the current paper describes the algorithm, proves that it is numerically stable, and proves that it is communication optimal.« less

  17. Communication-avoiding symmetric-indefinite factorization

    SciTech Connect (OSTI)

    Ballard, Grey Malone; Becker, Dulcenia; Demmel, James; Dongarra, Jack; Druinsky, Alex; Peled, Inon; Schwartz, Oded; Toledo, Sivan; Yamazaki, Ichitaro

    2014-11-13

    We describe and analyze a novel symmetric triangular factorization algorithm. The algorithm is essentially a block version of Aasen's triangular tridiagonalization. It factors a dense symmetric matrix A as the product A=PLTLTPT where P is a permutation matrix, L is lower triangular, and T is block tridiagonal and banded. The algorithm is the first symmetric-indefinite communication-avoiding factorization: it performs an asymptotically optimal amount of communication in a two-level memory hierarchy for almost any cache-line size. Adaptations of the algorithm to parallel computers are likely to be communication efficient as well; one such adaptation has been recently published. As a result, the current paper describes the algorithm, proves that it is numerically stable, and proves that it is communication optimal.

  18. Measurement of the Helium Factors at Jlab

    SciTech Connect (OSTI)

    Elena Khrosinkova

    2007-06-11

    An experiment to measure elastic electron scattering off 3He and 4He at large momentum transfers is presented. The experiment was carried out in the Hall A Facility of Jefferson Lab. Elastic electron scattering off 3He was measured at forward and backward electron scattering angles to extract the isotope's charge and magnetic form factors. The charge form factor of 4He will be extracted from forward-angle electron scattering angle measurements. The data are expected to significantly extend and improve the existing measurements of the three-and four-body form factors. The results will be crucial for the establishment of a canonical standard model for the few- body nuclear systems and for testing predictions of quark dimensional scaling and hybrid nucleon- quark models.

  19. Human factors in nuclear technology - a history

    SciTech Connect (OSTI)

    Jones, D.B. )

    1992-01-01

    Human factors, human factors engineering (HFE), or ergonomics did not receive much formal attention in nuclear technology prior to the Three Mile Island Unit 2 (TMI-2) incident. Three principal reasons exist for this lack of concern. First, emerging technologies show little concern with how people will use a new system. Making the new technology work is considered more important than the people who will use it. Second, the culture of the users of nuclear power did not recognize a need for human factors. Traditional utilities had well established and effective engineering designs for control of electric power generation, while medicine considered the use of nuclear isotopes another useful tool, not requiring special ergonomics. Finally, the nuclear industry owed much to Admiral Rickover. He was definitely opposed.

  20. Chiral extrapolation of nucleon magnetic form factors

    SciTech Connect (OSTI)

    P. Wang; D. Leinweber; A. W. Thomas; R.Young

    2007-04-01

    The extrapolation of nucleon magnetic form factors calculated within lattice QCD is investigated within a framework based upon heavy baryon chiral effective-field theory. All one-loop graphs are considered at arbitrary momentum transfer and all octet and decuplet baryons are included in the intermediate states. Finite range regularization is applied to improve the convergence in the quark-mass expansion. At each value of the momentum transfer (Q{sup 2}), a separate extrapolation to the physical pion mass is carried out as a function of m{sub {pi}} alone. Because of the large values of Q{sup 2} involved, the role of the pion form factor in the standard pion-loop integrals is also investigated. The resulting values of the form factors at the physical pion mass are compared with experimental data as a function of Q{sup 2} and demonstrate the utility and accuracy of the chiral extrapolation methods presented herein.

  1. Hadronic form factors in kaon photoproduction

    SciTech Connect (OSTI)

    Syukurilla, L. Mart, T.

    2014-09-25

    We have revisited the effect of hadronic form factors in kaon photoproduction process by utilizing an isobaric model developed for kaon photoproduction off the proton. The model is able to reproduce the available experimental data nicely as well as to reveal the origin of the second peak in the total cross section, which was the main source of confusion for decades. Different from our previous study, in the present work we explore the possibility of using different hadronic form factors in each of the K?N vertices. The use of different hadronic form factors, e.g. dipole, Gaussian, and generalized dipole, has been found to produce a more flexible isobar model, which can provide a significant improvement in the model.

  2. Power-factor metering gains new interest

    SciTech Connect (OSTI)

    Womack, D.L.

    1980-01-01

    The combined effect of increased energy costs, advances in digital metering techniques, and regulatory pressures is stimulating utility interest in charging smaller customers the full cost of their burden on the electric system, by metering reactive power and billing for poor power factor. Oklahoma Gas and Electric Co. adopted the Q-meter method, made practical with the advent of magnetic-tape metering. Digital metering and new techniques now being developed will add more options for utilities interested in metering power factor. There are three commonly used methods of determining power factor, all of which require the use of the standard induction watthour meter, plus at least one other meter, to obtain a second value in the power triangle. In all cases, the third value, if required, is obtained by calculation.

  3. Human factors challenges for advanced process control

    SciTech Connect (OSTI)

    Stubler, W.F.; O`Hara, J..M.

    1996-08-01

    New human-system interface technologies provide opportunities for improving operator and plant performance. However, if these technologies are not properly implemented, they may introduce new challenges to performance and safety. This paper reports the results from a survey of human factors considerations that arise in the implementation of advanced human-system interface technologies in process control and other complex systems. General trends were identified for several areas based on a review of technical literature and a combination of interviews and site visits with process control organizations. Human factors considerations are discussed for two of these areas, automation and controls.

  4. Annotated bibliography of human factors applications literature

    SciTech Connect (OSTI)

    McCafferty, D.B.

    1984-09-30

    This bibliography was prepared as part of the Human Factors Technology Project, FY 1984, sponsored by the Office of Nuclear Safety, US Department of Energy. The project was conducted by Lawrence Livermore National Laboratory, with Essex Corporation as a subcontractor. The material presented here is a revision and expansion of the bibliographic material developed in FY 1982 as part of a previous Human Factors Technology Project. The previous bibliography was published September 30, 1982, as Attachment 1 to the FY 1982 Project Status Report.

  5. Meson-photon transition form factors

    SciTech Connect (OSTI)

    Balakireva, Irina; Lucha, Wolfgang; Melikhov, Dmitri

    2012-10-23

    We present the results of our recent analysis of the meson-photon transition form factors F{sub P{gamma}}(Q{sup 2}) for the pseudoscalar mesons P {pi}{sup 0},{eta},{eta} Prime ,{eta}{sub c}, using the local-duality version of QCD sum rules.

  6. Factors Affecting PMU Installation Costs (October 2014)

    Broader source: Energy.gov [DOE]

    The Department of Energy investigated the major cost factors that affected PMU installation costs for the synchrophasor projects funded through the Recovery Act Smart Grid Programs. The data was compiled through interviews with the nine projects that deployed production grade synchrophasor systems.

  7. Neutrino mass, dark energy, and the linear growth factor (Journal...

    Office of Scientific and Technical Information (OSTI)

    dark energy, and the linear growth factor Citation Details In-Document Search Title: Neutrino mass, dark energy, and the linear growth factor We study the degeneracies between ...

  8. Is the proton electromagnetic form factor modified in nuclei...

    Office of Scientific and Technical Information (OSTI)

    Is the proton electromagnetic form factor modified in nuclei? Citation Details In-Document Search Title: Is the proton electromagnetic form factor modified in nuclei? You are ...

  9. Method for determining formation quality factor from well log...

    Office of Scientific and Technical Information (OSTI)

    factor from well log data and its application to seismic reservoir characterization Citation Details In-Document Search Title: Method for determining formation quality factor ...

  10. Initiation factor 2 crystal structure reveals a different domain...

    Office of Scientific and Technical Information (OSTI)

    Initiation factor 2 crystal structure reveals a different domain organization from eukaryotic initiation factor 5B and mechanism among translational GTPases Citation Details ...

  11. Theory of factors limiting high gradient operation of warm acceleratin...

    Office of Scientific and Technical Information (OSTI)

    Theory of factors limiting high gradient operation of warm accelerating structures Citation Details In-Document Search Title: Theory of factors limiting high gradient operation of ...

  12. Module: Emission Factors for Deforestation | Open Energy Information

    Open Energy Info (EERE)

    www.leafasia.orgtoolstechnical-guidance-series-emission-factors-defo Cost: Free Language: English Module: Emission Factors for Deforestation Screenshot Logo: Module: Emission...

  13. Engineering an allosteric transcription factor to respond to...

    Office of Scientific and Technical Information (OSTI)

    Engineering an allosteric transcription factor to respond to new ligands Citation Details In-Document Search Title: Engineering an allosteric transcription factor to respond to new ...

  14. Test of factorization in diffractive deep inelastic scattering...

    Office of Scientific and Technical Information (OSTI)

    Test of factorization in diffractive deep inelastic scattering and photoproduction at HERA Citation Details In-Document Search Title: Test of factorization in diffractive deep ...

  15. Dense LU Factorization on Multicore Supercomputer Nodes (Conference...

    Office of Scientific and Technical Information (OSTI)

    factorization's memory hierarchy contention on now-ubiquitous multi-core architectures. ... During active panel factorization, rank-1 updates stream through memory with minimal ...

  16. Study of Factors Affecting Shrub Establishment on the Monticello...

    Office of Environmental Management (EM)

    Study of Factors Affecting Shrub Establishment on the Monticello, Utah, Disposal Cell Cover Study of Factors Affecting Shrub Establishment on the Monticello, Utah, Disposal Cell...

  17. Research on Factors Relating to Density and Climate Change |...

    Open Energy Info (EERE)

    on Factors Relating to Density and Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Research on Factors Relating to Density and Climate Change Agency...

  18. Crystal structure of elongation factor 4 bound to a clockwise...

    Office of Scientific and Technical Information (OSTI)

    Crystal structure of elongation factor 4 bound to a clockwise ratcheted ribosome Citation Details In-Document Search Title: Crystal structure of elongation factor 4 bound to a ...

  19. First Climate formerly Factor Consulting | Open Energy Information

    Open Energy Info (EERE)

    First Climate formerly Factor Consulting Jump to: navigation, search Name: First Climate (formerly Factor Consulting) Place: Germany Sector: Carbon Product: Former Swiss-based...

  20. Human Factors Engineering Analysis Tool - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Human Factors Engineering Analysis Tool Software tool that enables easy and quick selection of applicable regulatory guidelines as starting point for human factors engineering ...

  1. HUMAN FACTORS GUIDANCE FOR CONTROL ROOM EVALUATION

    SciTech Connect (OSTI)

    OHARA,J.; BROWN,W.; STUBLER,W.; HIGGINS,J.; WACHTEL,J.; PERSENSKY,J.J.

    2000-07-30

    The Human-System Interface Design Review Guideline (NUREG-0700, Revision 1) was developed by the US Nuclear Regulatory Commission (NRC) to provide human factors guidance as a basis for the review of advanced human-system interface technologies. The guidance consists of three components: design review procedures, human factors engineering guidelines, and a software application to provide design review support called the ``Design Review Guideline.'' Since it was published in June 1996, Rev. 1 to NUREG-0700 has been used successfully by NRC staff, contractors and nuclear industry organizations, as well as by interested organizations outside the nuclear industry. The NRC has committed to the periodic update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool in the face of emerging and rapidly changing technology. This paper addresses the current research to update of NUREG-0700 based on the substantial work that has taken place since the publication of Revision 1.

  2. Understanding Hazardous Combustion Byproducts Reduces Factors Impacting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Change Hazardous Combustion Byproducts Reduces Factors Impacting Climate Change - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery

  3. Transcription factor-based biosensors for detecting dicarboxylic acids

    DOE Patents [OSTI]

    Dietrich, Jeffrey; Keasling, Jay

    2014-02-18

    The invention provides methods and compositions for detecting dicarboxylic acids using a transcription factor biosensor.

  4. Various factors affect coiled tubing limits

    SciTech Connect (OSTI)

    Yang, Y.S.

    1996-01-15

    Safety and reliability remain the primary concerns in coiled tubing operations. Factors affecting safety and reliability include corrosion, flexural bending, internal (or external) pressure and tension (or compression), and mechanical damage due to improper use. Such limits as coiled tubing fatigue, collapse, and buckling need to be understood to avoid disaster. With increased use of coiled tubing, operators will gain more experience. But at the same time, with further research and development of coiled tubing, the manufacturing quality will be improved and fatigue, collapse, and buckling models will become more mature, and eventually standard specifications will be available. This paper reviews the uses of coiled tubing and current research on mechanical behavior of said tubing. It also discusses several models used to help predict fatigue and failure levels.

  5. Chiral corrections to hyperon axial form factors

    SciTech Connect (OSTI)

    Jiang Fujiun; Tiburzi, B. C.

    2008-05-01

    We study the complete set of flavor-changing hyperon axial-current matrix elements at small momentum transfer. Using partially quenched heavy baryon chiral perturbation theory, we derive the chiral and momentum behavior of the axial and induced pseudoscalar form factors. The meson pole contributions to the latter posses a striking signal for chiral physics. We argue that the study of hyperon axial matrix elements enables a systematic lattice investigation of the efficacy of three-flavor chiral expansions in the baryon sector. This can be achieved by considering chiral corrections to SU(3) symmetry predictions, and their partially quenched generalizations. In particular, despite the presence of eight unknown low-energy constants, we are able to make next-to-leading order symmetry breaking predictions for two linear combinations of axial charges.

  6. Identification and Control of Factors that Affect EGR Cooler Fouling

    Broader source: Energy.gov [DOE]

    Key factors that cause exhaust gas recirculation cooler fouling were identified through extensive literature search and controlled experiment was devised to study the impact of a few key factors on deposition.

  7. Preparation and characterization of cobalt-substituted anthrax lethal factor

    SciTech Connect (OSTI)

    Saebel, Crystal E.; Carbone, Ryan; Dabous, John R.; Lo, Suet Y. [Department of Chemistry and Biochemistry, Laurentian University, 935 Ramsey Lake Rd., Sudbury, Ontario, Canada P3E 2C6 (Canada)] [Department of Chemistry and Biochemistry, Laurentian University, 935 Ramsey Lake Rd., Sudbury, Ontario, Canada P3E 2C6 (Canada); Siemann, Stefan, E-mail: ssiemann@laurentian.ca [Department of Chemistry and Biochemistry, Laurentian University, 935 Ramsey Lake Rd., Sudbury, Ontario, Canada P3E 2C6 (Canada)] [Department of Chemistry and Biochemistry, Laurentian University, 935 Ramsey Lake Rd., Sudbury, Ontario, Canada P3E 2C6 (Canada)

    2011-12-09

    Highlights: Black-Right-Pointing-Pointer Cobalt-substituted anthrax lethal factor (CoLF) is highly active. Black-Right-Pointing-Pointer CoLF can be prepared by bio-assimilation and direct exchange. Black-Right-Pointing-Pointer Lethal factor binds cobalt tightly. Black-Right-Pointing-Pointer The electronic spectrum of CoLF reveals penta-coordination. Black-Right-Pointing-Pointer Interaction of CoLF with thioglycolic acid follows a 2-step mechanism. -- Abstract: Anthrax lethal factor (LF) is a zinc-dependent endopeptidase involved in the cleavage of mitogen-activated protein kinase kinases near their N-termini. The current report concerns the preparation of cobalt-substituted LF (CoLF) and its characterization by electronic spectroscopy. Two strategies to produce CoLF were explored, including (i) a bio-assimilation approach involving the cultivation of LF-expressing Bacillus megaterium cells in the presence of CoCl{sub 2}, and (ii) direct exchange by treatment of zinc-LF with CoCl{sub 2}. Independent of the method employed, the protein was found to contain one Co{sup 2+} per LF molecule, and was shown to be twice as active as its native zinc counterpart. The electronic spectrum of CoLF suggests the Co{sup 2+} ion to be five-coordinate, an observation similar to that reported for other Co{sup 2+}-substituted gluzincins, but distinct from that documented for the crystal structure of native LF. Furthermore, spectroscopic studies following the exposure of CoLF to thioglycolic acid (TGA) revealed a sequential mechanism of metal removal from LF, which likely involves the formation of an enzyme: Co{sup 2+}:TGA ternary complex prior to demetallation of the active site. CoLF reported herein constitutes the first spectroscopic probe of LF's active site, which may be utilized in future studies to gain further insight into the enzyme's mechanism and inhibitor interactions.

  8. Human Factors Aspects of Operating Small Reactors

    SciTech Connect (OSTI)

    OHara, J.M.; Higgins, J.; Deem, R.; Xing, J.; DAgostino, A.

    2010-11-07

    The nuclear-power community has reached the stage of proposing advanced reactor designs to support power generation for decades to come. They are considering small modular reactors (SMRs) as one approach to meet these energy needs. While the power output of individual reactor modules is relatively small, they can be grouped to produce reactor sites with different outputs. Also, they can be designed to generate hydrogen, or to process heat. Many characteristics of SMRs are quite different from those of current plants, and so may require a concept of operations (ConOps) that also is different. The U.S. Nuclear Regulatory Commission (NRC) has begun examining the human factors engineering- (HFE) and ConOps- aspects of SMRs; if needed, they will formulate guidance to support SMR licensing reviews. We developed a ConOps model, consisting of the following dimensions: Plant mission; roles and responsibilities of all agents; staffing, qualifications, and training; management of normal operations; management of off-normal conditions and emergencies; and, management of maintenance and modifications. We are reviewing information on SMR design to obtain data about each of these dimensions, and have identified several preliminary issues. In addition, we are obtaining operations-related information from other types of multi-module systems, such as refineries, to identify lessons learned from their experience. Here, we describe the project's methodology and our preliminary findings.

  9. Confinement and the safety factor profile

    SciTech Connect (OSTI)

    Batha, S.H.; Levinton, F.M.; Scott, S.D.

    1995-12-01

    The conjecture that the safety factor profile, q(r), controls the improvement in tokamak plasmas from poor confinement in the Low (L-) mode regime to improved confinement in the supershot regime has been tested in two experiments on the Tokamak Fusion Test Reactor (TFTR). First, helium was puffed into the beam-heated phase of a supershot discharge which induced a degradation from supershot to L-mode confinement in about 100 msec, far less than the current relaxation time. The q and shear profiles measured by a motional Stark effect polarimeter showed little change during the confinement degradation. Second, rapid current ramps in supershot plasmas altered the q profile, but were observed not to change significantly the energy confinement. Thus, enhanced confinement in supershot plasmas is not due to a particular q profile which has enhanced stability or transport properties. The discharges making a continuous transition between supershot and L-mode confinement were also used to test the critical-electron-temperature-gradient transport model. It was found that this model could not reproduce the large changes in electron and ion temperature caused by the change in confinement.

  10. LPS-inducible factor(s) from activated macrophages mediates cytolysis of Naegleria fowleri amoebae

    SciTech Connect (OSTI)

    Cleary, S.F.; Marciano-Cabral, F.

    1986-03-01

    Soluble cytolytic factors of macrophage origin have previously been described with respect to their tumoricidal activity. The purpose of this study was to investigate the mechanism and possible factor(s) responsible for cytolysis of the amoeba Naegleria fowleri by activated peritoneal macrophages from B6C3F1 mice. Macrophages or conditioned medium (CM) from macrophage cultures were incubated with /sup 3/H-Uridine labeled amoebae. Percent specific release of label served as an index of cytolysis. Bacille Calmette-Guerin (BCG) and Corynebacterium parvum macrophages demonstrated significant cytolysis of amoebae at 24 h with an effector to target ratio of 10:1. Treatment of macrophages with inhibitors of RNA or protein synthesis blocked amoebicidal activity. Interposition of a 1 ..mu..m pore membrane between macrophages and amoebae inhibited killing. Inhibition in the presence of the membrane was overcome by stimulating the macrophages with LPS. CM from SPS-stimulated, but not unstimulated, cultures of activated macrophages was cytotoxic for amoebae. The activity was heat sensitive and was recovered from ammonium sulfate precipitation of the CM. Results indicate that amoebicidal activity is mediated by a protein(s) of macrophage origin induced by target cell contact or stimulation with LPS.

  11. Dose factor entry and display tool for BNCT radiotherapy

    DOE Patents [OSTI]

    Wessol, Daniel E.; Wheeler, Floyd J.; Cook, Jeremy L.

    1999-01-01

    A system for use in Boron Neutron Capture Therapy (BNCT) radiotherapy planning where a biological distribution is calculated using a combination of conversion factors and a previously calculated physical distribution. Conversion factors are presented in a graphical spreadsheet so that a planner can easily view and modify the conversion factors. For radiotherapy in multi-component modalities, such as Fast-Neutron and BNCT, it is necessary to combine each conversion factor component to form an effective dose which is used in radiotherapy planning and evaluation. The Dose Factor Entry and Display System is designed to facilitate planner entry of appropriate conversion factors in a straightforward manner for each component. The effective isodose is then immediately computed and displayed over the appropriate background (e.g. digitized image).

  12. Major Risk Factors to the Integrated Facility Disposition Project |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy to the Integrated Facility Disposition Project Major Risk Factors to the Integrated Facility Disposition Project The scope of the Integrated Facility Disposition Project (IFDP) needs to comprehensively address a wide range of environmental management risks at the Oak Ridge Reservation (ORO). Major Risk Factors to the Integrated Facility Disposition Project (227.35 KB) More Documents & Publications Major Risk Factors Integrated Facility Disposition Project - Oak Ridge

  13. Indoor risk factors for cough and their relation to wheeze and sensitization in Chilean young adults

    SciTech Connect (OSTI)

    Potts, J.F.; Rona, R.J.; Oyarzun, M.J.; Amigo, H.; Bustos, P.

    2008-04-15

    We assessed the effects of indoor risk factors, including smoking, on different types of cough and on cough and wheeze in combination. Our sample was composed of 1232 men and women residing in a semi-rural area of Chile. We used a standardized questionnaire, sensitization to 8 allergens, and bronchial hyperresponsiveness to methacholine to assess cough and wheeze characteristics. Information was gathered on dampness, mold, ventilation, heating, housing quality, smoking, and environmental tobacco smoke exposure. Most exposures were associated with cough alone or cough in combination with wheeze. Smoking, past smoking, and environmental tobacco smoke exposure were strongly associated with dry cough and wheeze. The use of coal for heating was associated with dry cough. Leaks, mold, and lack of kitchen ventilation were associated with cough and wheeze. Nocturnal cough and productive cough were associated with specific types of sensitization, but dry cough was not. Productive cough was associated with hyperresponsiveness to methacholine. Several different types of indoor exposures, including environmental tobacco smoke exposure, are important contributors to morbidity associated with cough and wheeze. A vigorous preventive strategy designed to lower exposures to indoor risk factors would lower rates of respiratory morbidity.

  14. Factors Impacting EGR Cooler Fouling - Main Effects and Interactions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Impacting EGR Cooler Fouling - Main Effects and Interactions Factors Impacting EGR Cooler Fouling - Main Effects and Interactions Presentation given at the 16th Directions in ...

  15. Analytical evaluation of atomic form factors: Application to Rayleigh scattering

    SciTech Connect (OSTI)

    Safari, L.; Santos, J. P.; Amaro, P.; Jnkl, K.; Fratini, F.

    2015-05-15

    Atomic form factors are widely used for the characterization of targets and specimens, from crystallography to biology. By using recent mathematical results, here we derive an analytical expression for the atomic form factor within the independent particle model constructed from nonrelativistic screened hydrogenic wave functions. The range of validity of this analytical expression is checked by comparing the analytically obtained form factors with the ones obtained within the Hartee-Fock method. As an example, we apply our analytical expression for the atomic form factor to evaluate the differential cross section for Rayleigh scattering off neutral atoms.

  16. Factors Affecting Power Output by Photovoltaic Cells Lesson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Factors Affecting Power Output by Photovoltaic Cells Grade Level(s): IB 2 (Senior - 3 ... C.8 Photovoltaic cells and dye-sensitized solar cells (DSSC) Understandings: * Solar ...

  17. Development of the Electricity Carbon Emission Factors for Russia...

    Open Energy Info (EERE)

    Russia Jump to: navigation, search Name Development of the Electricity Carbon Emission Factors for Russia AgencyCompany Organization European Bank for Reconstruction and...

  18. EPA Rainfall Erosivity Factor Calculator Website | Open Energy...

    Open Energy Info (EERE)

    Calculator Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: EPA Rainfall Erosivity Factor Calculator Website Abstract This website allows...

  19. Fragmentation, NRQCD and Factorization in Heavy Quarkonium Production...

    Office of Scientific and Technical Information (OSTI)

    However, we show that gauge invariance and factorization require that conventional NRQCD production matrix elements be modified to include Wilson lines or non-abelian gauge links. ...

  20. Electromagnetic form factors and the hypercentral constituent quark model

    SciTech Connect (OSTI)

    Sanctis, M. De; Giannini, M. M.; Santopinto, E.; Vassallo, A.

    2007-12-15

    We present new results concerning the electromagnetic form factors of the nucleon using a relativistic version of the hypercentral constituent quark model and a relativistic current.

  1. A Compendium of Transfer Factors for Agricultural and Animal...

    Office of Scientific and Technical Information (OSTI)

    Tables of transfer factors are listed by element and information source for beef, eggs, fish, fruit, grain, leafy vegetation, milk, poultry, and root vegetables. Authors: Staven, ...

  2. Identification and Control of Factors that Affect EGR Cooler...

    Broader source: Energy.gov (indexed) [DOE]

    Key factors that cause exhaust gas recirculation cooler fouling were identified through extensive literature search and controlled experiment was devised to study the impact of a ...

  3. Critical Factors Driving the High Volumetric Uptake of Methane...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Critical Factors Driving the High Volumetric Uptake of Methane in Cu-3(btc)(2) Previous Next List Hulvey, Zeric; Vlaisavljevich, Bess; Mason, Jarad A.; Tsivion, Ehud; Dougherty,...

  4. EPA - Rainfall Erosivity Factor Calculator webpage | Open Energy...

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for EPA - Rainfall Erosivity Factor Calculator webpage Citation Environmental...

  5. View Factor Calculation for Three-Dimensional Geometries.

    SciTech Connect (OSTI)

    1989-06-20

    Version 00 MCVIEW calculates the radiation geometric view factor between surfaces for three dimensional geometries with and without interposed third surface obstructions. It was developed to calculate view factors for input data to heat transfer analysis programs such as SCA-03/TRUMP, SCA-01/HEATING-5 and PSR-199/HEATING-6.

  6. Multi-factor Authentication Update | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Multi-factor Authentication Update There is a delay in the purchase of the multi-factor authentication software solution that will cause a lag in the planned implementation. The Laboratory is currently in negotiations to complete the purchase. Once complete, the implementation can begin.

  7. Consideration of Factors Affecting Strip Effluent PH and Sodium Content

    SciTech Connect (OSTI)

    Peters, T.

    2015-07-29

    A number of factors were investigated to determine possible reasons for why the Strip Effluent (SE) can sometimes have higher than expected pH values and/or sodium content, both of which have prescribed limits. All of the factors likely have some impact on the pH values and Na content.

  8. Scaling factor inconsistencies in neutrinoless double beta decay

    SciTech Connect (OSTI)

    Cowell, S. [Theoretical Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

    2006-02-15

    The modern theory of neutrinoless double beta decay includes a scaling factor that has often been treated inconsistently in the literature. The nuclear contribution to the decay half-life can be suppressed by 15%-20% when scaling factors are mismatched. Correspondingly, is overestimated.

  9. Using partial safety factors in wind turbine design and testing

    SciTech Connect (OSTI)

    Musial, W.D.; Butterfield, C.

    1997-09-01

    This paper describes the relationship between wind turbine design and testing in terms of the certification process. An overview of the current status of international certification is given along with a description of limit-state design basics. Wind turbine rotor blades are used to illustrate the principles discussed. These concepts are related to both International Electrotechnical Commission and Germanischer Lloyd design standards, and are covered using schematic representations of statistical load and material strength distributions. Wherever possible, interpretations of the partial safety factors are given with descriptions of their intended meaning. Under some circumstances, the authors` interpretations may be subjective. Next, the test-load factors are described in concept and then related to the design factors. Using technical arguments, it is shown that some of the design factors for both load and materials must be used in the test loading, but some should not be used. In addition, some test factors not used in the design may be necessary for an accurate test of the design. The results show that if the design assumptions do not clearly state the effects and uncertainties that are covered by the design`s partial safety factors, outside parties such as test labs or certification agencies could impose their own meaning on these factors.

  10. Lifestyle Factors in U.S. Residential Electricity Consumption

    SciTech Connect (OSTI)

    Sanquist, Thomas F.; Orr, Heather M.; Shui, Bin; Bittner, Alvah C.

    2012-03-30

    A multivariate statistical approach to lifestyle analysis of residential electricity consumption is described and illustrated. Factor analysis of selected variables from the 2005 U.S. Residential Energy Consumption Survey (RECS) identified five lifestyle factors reflecting social and behavioral choices associated with air conditioning, laundry usage, personal computer usage, climate zone of residence, and TV use. These factors were also estimated for 2001 RECS data. Multiple regression analysis using the lifestyle factors yields solutions accounting for approximately 40% of the variance in electricity consumption for both years. By adding the associated household and market characteristics of income, local electricity price and access to natural gas, variance accounted for is increased to approximately 54%. Income contributed only {approx}1% unique variance to the 2005 and 2001 models, indicating that lifestyle factors reflecting social and behavioral choices better account for consumption differences than income. This was not surprising given the 4-fold range of energy use at differing income levels. Geographic segmentation of factor scores is illustrated, and shows distinct clusters of consumption and lifestyle factors, particularly in suburban locations. The implications for tailored policy and planning interventions are discussed in relation to lifestyle issues.

  11. Dual chain synthetic heparin-binding growth factor analogs

    DOE Patents [OSTI]

    Zamora, Paul O.; Pena, Louis A.; Lin, Xinhua

    2009-10-06

    The invention provides synthetic heparin-binding growth factor analogs having two peptide chains each branched from a branch moiety, such as trifunctional amino acid residues, the branch moieties separated by a first linker of from 3 to about 20 backbone atoms, which peptide chains bind a heparin-binding growth factor receptor and are covalently bound to a non-signaling peptide that includes a heparin-binding domain, preferably by a second linker, which may be a hydrophobic second linker. The synthetic heparin-binding growth factor analogs are useful as pharmaceutical agents, soluble biologics or as surface coatings for medical devices.

  12. Dual chain synthetic heparin-binding growth factor analogs

    DOE Patents [OSTI]

    Zamora, Paul O.; Pena, Louis A.; Lin, Xinhua

    2012-04-24

    The invention provides synthetic heparin-binding growth factor analogs having two peptide chains each branched from a branch moiety, such as trifunctional amino acid residues, the branch moieties separated by a first linker of from 3 to about 20 backbone atoms, which peptide chains bind a heparin-binding growth factor receptor and are covalently bound to a non-signaling peptide that includes a heparin-binding domain, preferably by a second linker, which may be a hydrophobic second linker. The synthetic heparin-binding growth factor analogs are useful as pharmaceutical agents, soluble biologics or as surface coatings for medical devices.

  13. The structure of the nucleon: Elastic electromagnetic form factors

    SciTech Connect (OSTI)

    Punjabi, V.; Perdrisat, C. F.; Jones, M. K.; Brash, E. J.; Carlson, C. E.

    2015-07-10

    Precise proton and neutron form factor measurements at Jefferson Lab, using spin observables, have recently made a significant contribution to the unraveling of the internal structure of the nucleon. Accurate experimental measurements of the nucleon form factors are a test-bed for understanding how the nucleon's static properties and dynamical behavior emerge from QCD, the theory of the strong interactions between quarks. There has been enormous theoretical progress, since the publication of the Jefferson Lab proton form factor ratio data, aiming at reevaluating the picture of the nucleon. We will review the experimental and theoretical developments in this field and discuss the outlook for the future.

  14. Proton Form Factors Measurements in the Time-Like Region

    SciTech Connect (OSTI)

    Anulli, F.; /Frascati

    2007-10-22

    I present an overview of the measurement of the proton form factors in the time-like region. BABAR has recently measured with great accuracy the e{sup +}e{sup -} {yields} p{bar p} reaction from production threshold up to an energy of {approx} 4.5 GeV, finding evidence for a ratio of the electric to magnetic form factor greater than unity, contrary to expectation. In agreement with previous measurements, BABAR confirmed the steep rise of the magnetic form factor close to the p{bar p} mass threshold, suggesting the possible presence of an under-threshold N{bar N} vector state. These and other open questions related to the nucleon form factors both in the time-like and space-like region, wait for more data with different experimental techniques to be possibly solved.

  15. Factors Controlling The Geochemical Evolution Of Fumarolic Encrustatio...

    Open Energy Info (EERE)

    Smokes (VTTS). The six-factor solution model explains a large proportion (low of 74% for Ni to high of 99% for Si) of the individual element data variance. Although the primary...

  16. Property:Geothermal/LoadFactor | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search This is a property of type Number. Pages using the property "GeothermalLoadFactor" Showing 25 pages using this property. (previous 25) (next 25) 4 4 UR...

  17. Indoor Thermal Factors and Symptoms in Office Workers: Findings...

    Office of Scientific and Technical Information (OSTI)

    from the U.S. EPA BASE Study Citation Details In-Document Search Title: Indoor Thermal Factors and Symptoms in Office Workers: Findings from the U.S. EPA BASE Study You ...

  18. CDPHE Construction Storm Water Forms R-Factor Waiver Application...

    Open Energy Info (EERE)

    CDPHE Construction Storm Water Forms R-Factor Waiver Application Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit...

  19. Recommended U-factors for swinging, overhead, and revolving doors

    SciTech Connect (OSTI)

    Carpenter, S.C.; Hogan, J.

    1996-11-01

    Doors are often an overlooked component in the thermal integrity of the building envelope. Although swinging doors represent a small portion of the shell in residential buildings, their U-factor is usually many times higher than those of walls or ceilings. In some commercial buildings, loading (overhead) doors represent a significant area of high heat loss. Contrary to common perception, there is a wide range in the design, type, and therefore thermal performance of doors. The 1997 ASHRAE Handbook of Fundamentals will contain expanded tables of door U-factors to account for these product variations. This paper presents the results of detailed computer simulations of door U-factors. Recommended U-factors for glazed and unglazed residential and commercial swinging doors and commercial/industrial overhead and revolving doors are presented.

  20. Hadronic Form Factors in Asymptotically Free Field Theories

    DOE R&D Accomplishments [OSTI]

    Gross, D. J.; Treiman, S. B.

    1974-01-01

    The breakdown of Bjorken scaling in asymptotically free gauge theories of the strong interactions is explored for its implications on the large q{sup 2} behavior of nucleon form factors. Duality arguments of Bloom and Gilman suggest a connection between the form factors and the threshold properties of the deep inelastic structure functions. The latter are addressed directly in an analysis of asymptotically free theories; and through the duality connection we are then led to statements about the form factors. For very large q{sup 2} the form factors are predicted to fall faster than any inverse power of q{sup 2}. For the more modest range of q{sup 2} reached in existing experiments the agreement with data is fairly good, though this may well be fortuitous. Extrapolations beyond this range are presented.

  1. Phenomenology of semileptonic B -meson decays with form factors...

    Office of Scientific and Technical Information (OSTI)

    of semileptonic B -meson decays with form factors from lattice QCD Authors: Du, Daping ; El-Khadra, A. X. ; Gottlieb, Steven ; Kronfeld, A. S. ; Laiho, J. ; Lunghi, E. ; Van de...

  2. Measurement and interpretation of threshold stress intensity factors for steels in high-pressure hydrogen gas.

    SciTech Connect (OSTI)

    Dadfarnia, Mohsen; Nibur, Kevin A.; San Marchi, Christopher W.; Sofronis, Petros; Somerday, Brian P.; Foulk, James W., III; Hayden, Gary A.

    2010-07-01

    Threshold stress intensity factors were measured in high-pressure hydrogen gas for a variety of low alloy ferritic steels using both constant crack opening displacement and rising crack opening displacement procedures. The sustained load cracking procedures are generally consistent with those in ASME Article KD-10 of Section VIII Division 3 of the Boiler and Pressure Vessel Code, which was recently published to guide design of high-pressure hydrogen vessels. Three definitions of threshold were established for the two test methods: K{sub THi}* is the maximum applied stress intensity factor for which no crack extension was observed under constant displacement; K{sub THa} is the stress intensity factor at the arrest position for a crack that extended under constant displacement; and K{sub JH} is the stress intensity factor at the onset of crack extension under rising displacement. The apparent crack initiation threshold under constant displacement, K{sub THi}*, and the crack arrest threshold, K{sub THa}, were both found to be non-conservative due to the hydrogen exposure and crack-tip deformation histories associated with typical procedures for sustained-load cracking tests under constant displacement. In contrast, K{sub JH}, which is measured under concurrent rising displacement and hydrogen gas exposure, provides a more conservative hydrogen-assisted fracture threshold that is relevant to structural components in which sub-critical crack extension is driven by internal hydrogen gas pressure.

  3. Measurement and interpretation of threshold stress intensity factors for steels in high-pressure hydrogen gas.

    SciTech Connect (OSTI)

    Nibur, Kevin A.

    2010-11-01

    Threshold stress intensity factors were measured in high-pressure hydrogen gas for a variety of low alloy ferritic steels using both constant crack opening displacement and rising crack opening displacement procedures. The sustained load cracking procedures are generally consistent with those in ASME Article KD-10 of Section VIII Division 3 of the Boiler and Pressure Vessel Code, which was recently published to guide design of high-pressure hydrogen vessels. Three definitions of threshold were established for the two test methods: K{sub THi}* is the maximum applied stress intensity factor for which no crack extension was observed under constant displacement; K{sub THa} is the stress intensity factor at the arrest position for a crack that extended under constant displacement; and K{sub JH} is the stress intensity factor at the onset of crack extension under rising displacement. The apparent crack initiation threshold under constant displacement, K{sub THi}*, and the crack arrest threshold, K{sub THa}, were both found to be non-conservative due to the hydrogen exposure and crack-tip deformation histories associated with typical procedures for sustained-load cracking tests under constant displacement. In contrast, K{sub JH}, which is measured under concurrent rising displacement and hydrogen gas exposure, provides a more conservative hydrogen-assisted fracture threshold that is relevant to structural components in which sub-critical crack extension is driven by internal hydrogen gas pressure.

  4. Charm and bottom hadronic form factors with QCD sum rules

    SciTech Connect (OSTI)

    Bracco, M. E.; Rodrigues, B. O.; Cerqueira, A. Jr.

    2013-03-25

    We present a brief review of some calculations of form factors and coupling constants in vertices with charm and bottom mesons in the framework of QCD sum rules. We first discuss the motivation for this work, describing possible applications of these form factors to charm and bottom decays processes. We first make a summarize of the QCD sum rules method. We give special attention to the uncertainties of the method introducing by the intrinsic variation of the parameters. Finally we conclude.

  5. Dissipation factor as a predictor of anodic coating performance

    DOE Patents [OSTI]

    Panitz, Janda K. G.

    1995-01-01

    A dissipation factor measurement is used to predict as-anodized fixture performance prior to actual use of the fixture in an etching environment. A dissipation factor measurement of the anodic coating determines its dielectric characteristics and correlates to the performance of the anodic coating in actual use. The ability to predict the performance of the fixture and its anodized coating permits the fixture to be repaired or replaced prior to complete failure.

  6. Article Published on LED Lumen Maintenance and Light Loss Factors

    Broader source: Energy.gov [DOE]

    An article has been published in LEUKOS: The Journal of the Illuminating Engineering Society of North America (IES) that may be of interest to the solid-state lighting community. Entitled "Lumen Maintenance and Light Loss Factors: Consequences of Current Design Practices for LEDs," the article was written by Michael Royer of Pacific Northwest National Laboratory and discusses complications related to the lamp lumen depreciation (LLD) light loss factor and LEDs.

  7. Classical strongly coupled quark-gluon plasma. V. Structure factors

    SciTech Connect (OSTI)

    Cho, Sungtae; Zahed, Ismail

    2010-10-15

    We show that the classical and strongly coupled quark-gluon plasma is characterized by a multiple of structure factors that obey generalized Orstein-Zernicke equations. We use the canonical partition function and its associated density functional to derive analytical equations for the density and charge monopole structure factors for arbitrary values of {Gamma}=V/K, the ratio of the mean potential to the Coulomb energy. The results are compared with SU(2) molecular dynamics simulations.

  8. Comparison of AB2588 multipathway risk factors for California fossil-fuel power stations

    SciTech Connect (OSTI)

    Gratt, L.B.; Levin, L.

    1997-12-31

    Substances released from power plants may travel through various exposure pathways resulting in human health and environmental risks. The stack air emission`s primary pathway is inhalation from the ambient air. Multipathway factors (adjustment factors to the inhalation risk) are used to evaluate the importance of non-inhalation pathways (such as ingestion and dermal contact). The multipathway factor for a specific substance is the health risk by all pathways divided by the inhalation health risk for that substance. These factors are compared for fossil fuel power stations that submitted regulatory risk assessments in compliance with California Toxic Hot Spots Act (AB2588). Substances representing the largest contributions to the cancer risk are of primary concern: arsenic, beryllium, cadmium, chromium (+6), formaldehyde, nickel, lead, selenium, and PAHs. Comparisons of the chemical-specific multipathway factors show the impacts of regulatory policy decisions on the estimated health risk for trace substances. As an example, point estimates of the soil mixing depth, varying from 1 cm to 15 cm, relate to the relative importance of the pathway. For the deeper mixing depths, the root-zone uptake by homegrown tomato plants (for assumed consumption rate of 15% for San Diego) may result in high multipathway factors for several trace metals. For shallower mixing depths, soil ingestion may become the dominant non-inhalation pathway. These differences may lead to significantly different risk estimates for similar facilities located at different California locations such as to be under local regulatory authorities. The overall multipathway factor for the total cancer risk is about 2, much smaller than some of the chemical-specific factors. Science-based multipathway analysis should reduce much of the concern that may be due to policy-based decisions on pathway selection and high-value point-estimates of the parameters.

  9. Constructing the S-matrix With Complex Factorization

    SciTech Connect (OSTI)

    Schuster, Philip C.; Toro, Natalia; /Stanford U., ITP

    2009-06-19

    A remarkable connection between BCFW recursion relations and constraints on the S-matrix was made by Benincasa and Cachazo in 0705.4305, who noted that mutual consistency of different BCFW constructions of four-particle amplitudes generates nontrivial (but familiar) constraints on three-particle coupling constants - these include gauge invariance, the equivalence principle, and the lack of non-trivial couplings for spins > 2. These constraints can also be derived with weaker assumptions, by demanding the existence of four-point amplitudes that factorize properly in all unitarity limits with complex momenta. From this starting point, we show that the BCFW prescription can be interpreted as an algorithm for fully constructing a tree-level S-matrix, and that complex factorization of general BCFW amplitudes follows from the factorization of four-particle amplitudes. The allowed set of BCFW deformations is identified, formulated entirely as a statement on the three-particle sector, and using only complex factorization as a guide. Consequently, our analysis based on the physical consistency of the S-matrix is entirely independent of field theory. We analyze the case of pure Yang-Mills, and outline a proof for gravity. For Yang-Mills, we also show that the well-known scaling behavior of BCFW-deformed amplitudes at large z is a simple consequence of factorization. For gravity, factorization in certain channels requires asymptotic behavior {approx} 1/z{sup 2}.

  10. Sex-specific tissue weighting factors for effective dose equivalent calculations

    SciTech Connect (OSTI)

    Xu, X.G. [Rensselaer Polytechnic Inst., Troy, NY (United States); Reece, W.D. [Texas A& M Univ., College Station, TX (United States)

    1996-01-01

    The effective dose equivalent was defined in the International Commission on Radiological Protection Publication 26 in 1977 and later adopted by the U.S. Nuclear REgulatory Commission. To calculate organ doses and effective dose equivalent for external exposures using Monte Carlo simulations, sex-specific anthropomorphic phantoms and sex-specific weighting factors are always employed. This paper presents detailed mathematical derivation of a set of sex-specific tissue weighting factors and the conditions which the weighting factors must satisfy. Results of effective dose equivalent calculations using female and male phantoms exposed to monoenergetic photon beams of 0.08, 0.3, and 1.0 MeV are provided and compared with results published by other authors using different sex-specific weighting factors and phantoms. The results indicate that females always receive higher effective dose equivalent than males for the photon energies and geometries considered and that some published data may be wrong due to mistakes in deriving the sex-specific weighting factors. 17 refs., 2 figs., 2 tabs.

  11. Measurements of the Helium Form Factors at JLab

    SciTech Connect (OSTI)

    Khrosinkova, Elena

    2007-10-26

    An experiment to measure elastic electron scattering off {sup 3}He and {sup 4}He at large momentum transfers is presented. The experiment was carried out in the Hall A Facility of Jefferson Lab. Elastic electron scattering off {sup 3}He was measured at forward and backward electron scattering angles to extract the isotope's charge and magnetic form factors. The charge form factor of {sup 4}He will be extracted from forward-angle electron scattering angle measurements. The data are expected to significantly extend and improve the existing measurements of the three- and four-body form factors. The results will be crucial for the establishment of a canonical standard model for the few-body nuclear systems and for testing predictions of quark dimensional scaling and hybrid nucleon-quark models.

  12. Selection of powder factor in large diameter blastholes

    SciTech Connect (OSTI)

    Eloranta, J.

    1995-12-31

    This paper documents the relationship between material handling and processing costs compared to blasting cost. The old adage, The cheapest crushing is done in the pit, appears accurate in this case study. Comparison of the accumulated cost of: powder, selected wear materials and electricity; indicate a strong, inverse correlation with powder factor (lbs powder/long ton of rock). In this case, the increased powder cost is more than offset by electrical savings alone. Measurable, overall costs decline while shovel and crusher productivity rise by about 5% when powder factor rises by 15%. These trends were previously masked by the effects of: weather, ore grade fluctuations and accounting practices. Attempts to correlate increased powder factor to: wear materials in the crushing plant and to shovel hoist rope life have not shown the same benefit.

  13. The structure of the nucleon: Elastic electromagnetic form factors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Punjabi, V.; Perdrisat, C. F.; Jones, M. K.; Brash, E. J.; Carlson, C. E.

    2015-07-10

    Precise proton and neutron form factor measurements at Jefferson Lab, using spin observables, have recently made a significant contribution to the unraveling of the internal structure of the nucleon. Accurate experimental measurements of the nucleon form factors are a test-bed for understanding how the nucleon's static properties and dynamical behavior emerge from QCD, the theory of the strong interactions between quarks. There has been enormous theoretical progress, since the publication of the Jefferson Lab proton form factor ratio data, aiming at reevaluating the picture of the nucleon. We will review the experimental and theoretical developments in this field and discussmore » the outlook for the future.« less

  14. Cosmic Reionization On Computers III. The Clumping Factor

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kaurov, Alexander A.; Gnedin, Nickolay Y.

    2015-09-09

    We use fully self-consistent numerical simulations of cosmic reionization, completed under the Cosmic Reionization On Computers project, to explore how well the recombinations in the ionized intergalactic medium (IGM) can be quantified by the effective "clumping factor." The density distribution in the simulations (and, presumably, in a real universe) is highly inhomogeneous and more-or-less smoothly varying in space. However, even in highly complex and dynamic environments, the concept of the IGM remains reasonably well-defined; the largest ambiguity comes from the unvirialized regions around galaxies that are over-ionized by the local enhancement in the radiation field ("proximity zones"). This ambiguity precludesmore » computing the IGM clumping factor to better than about 20%. Furthermore, we discuss a "local clumping factor," defined over a particular spatial scale, and quantify its scatter on a given scale and its variation as a function of scale.« less

  15. Ion-ion dynamic structure factor of warm dense mixtures

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gill, N. M.; Heinonen, R. A.; Starrett, C. E.; Saumon, D.

    2015-06-25

    In this study, the ion-ion dynamic structure factor of warm dense matter is determined using the recently developed pseudoatom molecular dynamics method [Starrett et al., Phys. Rev. E 91, 013104 (2015)]. The method uses density functional theory to determine ion-ion pair interaction potentials that have no free parameters. These potentials are used in classical molecular dynamics simulations. This constitutes a computationally efficient and realistic model of dense plasmas. Comparison with recently published simulations of the ion-ion dynamic structure factor and sound speed of warm dense aluminum finds good to reasonable agreement. Using this method, we make predictions of the ion-ionmore » dynamical structure factor and sound speed of a warm dense mixture—equimolar carbon-hydrogen. This material is commonly used as an ablator in inertial confinement fusion capsules, and our results are amenable to direct experimental measurement.« less

  16. Ion-ion dynamic structure factor of warm dense mixtures

    SciTech Connect (OSTI)

    Gill, N. M.; Heinonen, R. A.; Starrett, C. E.; Saumon, D.

    2015-06-25

    In this study, the ion-ion dynamic structure factor of warm dense matter is determined using the recently developed pseudoatom molecular dynamics method [Starrett et al., Phys. Rev. E 91, 013104 (2015)]. The method uses density functional theory to determine ion-ion pair interaction potentials that have no free parameters. These potentials are used in classical molecular dynamics simulations. This constitutes a computationally efficient and realistic model of dense plasmas. Comparison with recently published simulations of the ion-ion dynamic structure factor and sound speed of warm dense aluminum finds good to reasonable agreement. Using this method, we make predictions of the ion-ion dynamical structure factor and sound speed of a warm dense mixture—equimolar carbon-hydrogen. This material is commonly used as an ablator in inertial confinement fusion capsules, and our results are amenable to direct experimental measurement.

  17. Key Response Planning Factors for the Aftermath of Nuclear Terrorism

    SciTech Connect (OSTI)

    Buddemeier, B R; Dillon, M B

    2009-01-21

    Despite hundreds of above-ground nuclear tests and data gathered from Hiroshima and Nagasaki, the effects of a ground-level, low-yield nuclear detonation in a modern urban environment are still the subject of considerable scientific debate. Extensive review of nuclear weapon effects studies and discussions with nuclear weapon effects experts from various federal agencies, national laboratories, and technical organizations have identified key issues and bounded some of the unknowns required to support response planning for a low-yield, ground-level nuclear detonation in a modern U.S. city. This study, which is focused primarily upon the hazards posed by radioactive fallout, used detailed fallout predictions from the advanced suite of three-dimensional (3-D) meteorology and plume/fallout models developed at Lawrence Livermore National Laboratory (LLNL), including extensive global Key Response Planning Factors for the Aftermath of Nuclear Terrorism geographical and real-time meteorological databases to support model calculations. This 3-D modeling system provides detailed simulations that account for complex meteorology and terrain effects. The results of initial modeling and analysis were presented to federal, state, and local working groups to obtain critical, broad-based review and feedback on strategy and messaging. This effort involved a diverse set of communities, including New York City, National Capitol Regions, Charlotte, Houston, Portland, and Los Angeles. The largest potential for reducing casualties during the post-detonation response phase comes from reducing exposure to fallout radiation. This can be accomplished through early, adequate sheltering followed by informed, delayed evacuation.B The response challenges to a nuclear detonation must be solved through multiple approaches of public education, planning, and rapid response actions. Because the successful response will require extensive coordination of a large number of organizations, supplemented by

  18. Performance analysis of parallel supernodal sparse LU factorization

    SciTech Connect (OSTI)

    Grigori, Laura; Li, Xiaoye S.

    2004-02-05

    We investigate performance characteristics for the LU factorization of large matrices with various sparsity patterns. We consider supernodal right-looking parallel factorization on a bi-dimensional grid of processors, making use of static pivoting. We develop a performance model and we validate it using the implementation in SuperLU-DIST, the real matrices and the IBM Power3 machine at NERSC. We use this model to obtain performance bounds on parallel computers, to perform scalability analysis and to identify performance bottlenecks. We also discuss the role of load balance and data distribution in this approach.

  19. Structure factors for tunneling ionization rates of diatomic molecules

    SciTech Connect (OSTI)

    Saito, Ryoichi; Tolstikhin, Oleg I.; Madsen, Lars Bojer; Morishita, Toru

    2015-05-15

    Within the leading-order, single-active-electron, and frozen-nuclei approximation of the weak-field asymptotic theory, the rate of tunneling ionization of a molecule in an external static uniform electric field is determined by the structure factor for the highest occupied molecular orbital. We present the results of systematic calculations of structure factors for 40 homonuclear and heteronuclear diatomic molecules by the Hartree–Fock method using a numerical grid-based approach implemented in the program X2DHF.

  20. Greybody factors for Myers–Perry black holes

    SciTech Connect (OSTI)

    Boonserm, Petarpa; Chatrabhuti, Auttakit Ngampitipan, Tritos; Visser, Matt

    2014-11-15

    The Myers–Perry black holes are higher-dimensional generalizations of the usual (3+1)-dimensional rotating Kerr black hole. They are of considerable interest in Kaluza–Klein models, specifically within the context of brane-world versions thereof. In the present article, we shall consider the greybody factors associated with scalar field excitations of the Myers–Perry spacetimes, and develop some rigorous bounds on these greybody factors. These bounds are of relevance for characterizing both the higher-dimensional Hawking radiation, and the super-radiance, that is expected for these spacetimes.

  1. Dominant factors of the laser gettering of silicon wafers

    SciTech Connect (OSTI)

    Bokhan, Yu. I. E-mail: yuibokhan@gmail.com; Kamenkov, V. S.; Tolochko, N. K.

    2015-02-15

    The laser gettering of silicon wafers is experimentally investigated. The typical gettering parameters are considered. The surfaces of laser-treated silicon wafers are investigated by microscopy. When studying the effect of laser radiation on silicon wafers during gettering, a group of factors determining the conditions of interaction between the laser beam and silicon-wafer surface and affecting the final result of treatment are selected. The main factors determining the gettering efficiency are revealed. Limitations on the desired value of the getter-layer capacity on surfaces with insufficiently high cleanness (for example, ground or matte) are established.

  2. UPDATING THE NRC GUIDANCE FOR HUMAN FACTORS ENGINEERING REVIEWS.

    SciTech Connect (OSTI)

    O HARA,J.M.; BROWN,W.S.; HIGGINS,J.C.; PERSENSKY,J.J.; LEWIS,P.M.; BONGARRA,J.

    2002-09-15

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) aspects of nuclear plants. NUREG-0800 (Standard Review Plan), Chapter 18, ''Human Factors Engineering,'' is the principal NRC staff guidance document. Two main documents provide the review criteria to support the evaluations. The HFE Program Review Model (NUREG-0711) addresses the design process from planning to verification and validation to design implementation. The Human-System Interface Design Review Guidelines (NUREG-0700) provides the guidelines for the review of the HFE aspects of human-system interface technology, such as alarms, information systems, controls, and control room design. Since these documents were published in 1994 and 1996 respectively, they have been used by NRC staff, contractors, nuclear industry organizations, as well as by numerous organizations outside the nuclear industry. Using feedback from users and NRC research conducted in recent years, both documents have been revised and updated. This was done to ensure that they remain state-of-the-art evaluation tools for changing nuclear industry issues and emerging technologies. This paper describes the methodology used to revise and update the documents and summarizes the changes made to each and their current contents. Index Terms for this report are: Control system human factors, Ergonomics, Human factors, Nuclear power generation safety.

  3. The Modern description of semileptonic meson form factors

    SciTech Connect (OSTI)

    Hill, Richard J.

    2006-06-01

    I describe recent advances in our understanding of the hadronic form factors governing semileptonic meson transitions. The resulting framework provides a systematic approach to the experimental data, as a means of extracting precision observables, testing nonperturbative field theory methods, and probing a poorly understood limit of QCD.

  4. Human Factors Evaluation of Advanced Electric Power Grid Visualization Tools

    SciTech Connect (OSTI)

    Greitzer, Frank L.; Dauenhauer, Peter M.; Wierks, Tamara G.; Podmore, Robin

    2009-04-01

    This report describes initial human factors evaluation of four visualization tools (Graphical Contingency Analysis, Force Directed Graphs, Phasor State Estimator and Mode Meter/ Mode Shapes) developed by PNNL, and proposed test plans that may be implemented to evaluate their utility in scenario-based experiments.

  5. Nucleon form factors program with SBS at JLAB

    SciTech Connect (OSTI)

    Wojtsekhowski, Bogdan B.

    2014-12-01

    The physics of the nucleon form factors is the basic part of the Jefferson Laboratory program. We review the achievements of the 6-GeV era and the program with the 12- GeV beam with the SBS spectrometer in Hall A, with a focus on the nucleon ground state properties.

  6. Effect of Environmental Factors on Sulfur Gas Emissions from Drywall

    SciTech Connect (OSTI)

    Maddalena, Randy

    2011-08-20

    Problem drywall installed in U.S. homes is suspected of being a source of odorous and potentially corrosive indoor pollutants. The U.S. Consumer Product Safety Commission's (CPSC) investigation of problem drywall incorporates three parallel tracks: (1) evaluating the relationship between the drywall and reported health symptoms; (2) evaluating the relationship between the drywall and electrical and fire safety issues in affected homes; and (3) tracing the origin and the distribution of the drywall. To assess the potential impact on human health and to support testing for electrical and fire safety, the CPSC has initiated a series of laboratory tests that provide elemental characterization of drywall, characterization of chemical emissions, and in-home air sampling. The chemical emission testing was conducted at Lawrence Berkeley National Laboratory (LBNL). The LBNL study consisted of two phases. In Phase 1 of this study, LBNL tested thirty drywall samples provided by CPSC and reported standard emission factors for volatile organic compounds (VOCs), aldehydes, reactive sulfur gases (RSGs) and volatile sulfur compounds (VSCs). The standard emission factors were determined using small (10.75 liter) dynamic test chambers housed in a constant temperature environmental chamber. The tests were all run at 25 C, 50% relative humidity (RH) and with an area-specific ventilation rate of {approx}1.5 cubic meters per square meter of emitting surface per hour [m{sup 3}/m{sup 2}/h]. The thirty samples that were tested in Phase 1 included seventeen that were manufactured in China in 2005, 2006 and 2009, and thirteen that were manufactured in North America in 2009. The measured emission factors for VOCs and aldehydes were generally low and did not differ significantly between the Chinese and North American drywall. Eight of the samples tested had elevated emissions of volatile sulfur-containing compounds with total RSG emission factors between 32 and 258 micrograms per square meter

  7. AREA FACTOR DETERMINATIONS FOR AN INDUSTRIAL WORKER EXPOSED TO A CONCRETE SLAB END-STATE

    SciTech Connect (OSTI)

    Jannik, T; Patricia Lee, P; Eduardo Farfan, E; Jesse Roach, J

    2007-02-08

    The U.S. Department of Energy's (DOE) Savannah River Site (SRS) is decommissioning many of its excess facilities through removal of the facility structures leaving only the concrete-slab foundations in place. Site-specific, risk-based derived concentration guideline levels (DCGLs) for radionuclides have been determined for a future industrial worker potentially exposed to residual contamination on these concrete slabs as described in Jannik [1]. These risk-based DCGLs were estimated for an exposure area of 100 m{sup 2}. During deactivation and decommissioning (D&D) operations at SRS, the need for area factors for larger and smaller contaminated areas arose. This paper compares the area factors determined for an industrial worker exposed to a concrete slab end-state for several radionuclides of concern at SRS with (1) the illustrative area factors provided in MARSSIM [2], (2) the area correction factors provided in the U.S. Environmental Protection Agency's (EPA) Soil Screening Guidance [3], and (3) the hot spot criterion for field application provided in the RESRAD User's Manual [4].

  8. Discovery of Novel P1 Groups for Coagulation Factor VIIa Inhibition...

    Office of Scientific and Technical Information (OSTI)

    for Coagulation Factor VIIa Inhibition Using Fragment-Based Screening Citation Details In-Document Search Title: Discovery of Novel P1 Groups for Coagulation Factor VIIa Inhibition ...

  9. Tuning g factors of core-shell nanoparticles by controlled positioning...

    Office of Scientific and Technical Information (OSTI)

    Tuning g factors of core-shell nanoparticles by controlled positioning of magnetic ... 22, 2017 Prev Next Title: Tuning g factors of core-shell nanoparticles by ...

  10. DOE Order 458.1 Property Clearance Requirements and Factors Considered...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    58.1 Property Clearance Requirements and Factors Considered to Update Its Clearance Limits DOE Order 458.1 Property Clearance Requirements and Factors Considered to Update Its ...

  11. Factors that affect electric-utility stranded commitments

    SciTech Connect (OSTI)

    Hirst, E.; Hadley, S.; Baxter, L.

    1996-07-01

    Estimates of stranded commitments for U.S. investor-owned utilities range widely, with many falling in the range of $100 to $200 billion. These potential losses exist because some utility-owned power plants, long-term power-purchase contracts and fuel-supply contracts, regulatory assets, and expenses for public-policy programs have book values that exceed their expected market values under full competition. This report quantifies the sensitivity of stranded- commitment estimates to the various factors that lead to these above- market-value estimates. The purpose of these sensitivity analyses is to improve understanding on the part of state and federal regulators, utilities, customers, and other electric-industry participants about the relative importance of the factors that affect stranded- commitment amounts.

  12. Performance of non-conventional factorization approaches for neutron kinetics

    SciTech Connect (OSTI)

    Bulla, S.; Nervo, M.

    2013-07-01

    The use of factorization techniques provides a interesting option for the simulation of the time-dependent behavior of nuclear systems with a reduced computational effort. While point kinetics neglects all spatial and spectral effects, quasi-statics and multipoint kinetics allow to produce results with a higher accuracy for transients involving relevant modifications of the neutron distribution. However, in some conditions these methods can not work efficiently. In this paper, we discuss some possible alternative formulations for the factorization process for neutron kinetics, leading to mathematical models of reduced complications that can allow an accurate simulation of transients involving spatial and spectral effects. The performance of these innovative approaches are compared to standard techniques for some test cases, showing the benefits and shortcomings of the method proposed. (authors)

  13. Surface engineering of the quality factor of metal coated microcantilevers

    SciTech Connect (OSTI)

    Ergincan, O.; Kooi, B. J.; Palasantzas, G.

    2014-12-14

    We performed noise measurements to obtain the quality factor (Q) and frequency shift of gold coated microcantilevers before and after surface modification using focused ion beam. As a result of our studies, it is demonstrated that surface engineering offers a promising method to control and increase the Q factor up to 50% for operation in vacuum. Surface modification could also lead to deviations from the known Q ∼ P{sup −1} behavior at low vacuum pressures P within the molecular regime. Finally, at higher pressures within the continuum regime, where Q is less sensitive to surface changes, a power scaling Q ∼ P{sup c} with c ≈ 0.3 was found instead of c = 0.5. The latter is explained via a semi-empirical formulation to account for continuum dissipation mechanisms at significant Reynolds numbers Re ∼ 1.

  14. Factorization of large integers on a massively parallel computer

    SciTech Connect (OSTI)

    Davis, J.A.; Holdridge, D.B.

    1988-01-01

    Our interest in integer factorization at Sandia National Laboratories is motivated by cryptographic applications and in particular the security of the RSA encryption-decryption algorithm. We have implemented our version of the quadratic sieve procedure on the NCUBE computer with 1024 processors (nodes). The new code is significantly different in all important aspects from the program used to factor number of order 10/sup 70/ on a single processor CRAY computer. Capabilities of parallel processing and limitation of small local memory necessitated this entirely new implementation. This effort involved several restarts as realizations of program structures that seemed appealing bogged down due to inter-processor communications. We are presently working with integers of magnitude about 10/sup 70/ in tuning this code to the novel hardware. 6 refs., 3 figs.

  15. Factors driving wind power development in the United States

    SciTech Connect (OSTI)

    Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

    2003-05-15

    In the United States, there has been substantial recent growth in wind energy generating capacity, with growth averaging 24 percent annually during the past five years. About 1,700 MW of wind energy capacity was installed in 2001, while another 410 MW became operational in 2002. This year (2003) shows promise of significant growth with more than 1,500 MW planned. With this growth, an increasing number of states are experiencing investment in wind energy projects. Wind installations currently exist in about half of all U.S. states. This paper explores the key factors at play in the states that have achieved a substantial amount of wind energy investment. Some of the factors that are examined include policy drivers, such as renewable portfolio standards (RPS), federal and state financial incentives, and integrated resource planning; as well as market drivers, such as consumer demand for green power, natural gas price volatility, and wholesale market rules.

  16. Precision Measurements of the Proton Elastic Form Factor Ratio

    SciTech Connect (OSTI)

    Douglas Higinbotham

    2010-08-01

    New high precision polarization measurements of the proton elastic form factor ratio in the Q^2 from 0.3 to 0.7 [GeV/c]^2 have been made. These elastic H(e,e'p) measurementswere done in Jefferson Lab's Hall A using 80% longitudinally polarized electrons and recoil polarimetry. For Q^2 greater than 1 [GeV/c]^2, previous polarization data indicated a strong deviation of the form factor ratio from unity which sparked renewed theoretical and experimental interest in how two-photon diagrams have been taken into account. The new high precision data indicate that the deviation from unity, while small, persists even at Q^2 less than 1 [GeV/c]^2.

  17. Measurement of the gamma gamma* -> pi0 transition form factor

    SciTech Connect (OSTI)

    Aubert, B.

    2009-06-02

    We study the reaction e{sup +}e{sup -} {yields} e{sup +}e{sup -}{pi}{sup 0} in the single tag mode and measure the differential cross section d{sigma}/dQ{sup 2} and the {gamma}{gamma}* {yields} {pi}{sup 0} transition form factor in the mometum transfer range from 4 to 40 GeV{sup 2}. At Q{sup 2} > 10 GeV{sup 2} the measured form factor exceeds the asymptotic limit predicted by perturbative QCD. The analysis is based on 442 fb{sup -1} of integrated luminosity collected at PEP-II with the BABAR detector at e{sup +}e{sup -} center-of-mass energies near 10.6 GeV.

  18. Factors Affecting HCCI Combustion Phasing for Fuels with Single- and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dual-Stage Chemistry | Department of Energy Affecting HCCI Combustion Phasing for Fuels with Single- and Dual-Stage Chemistry Factors Affecting HCCI Combustion Phasing for Fuels with Single- and Dual-Stage Chemistry 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: Sandia National Laboratories 2004_deer_dec.pdf (185.71 KB) More Documents & Publications Microsoft PowerPoint - DEER03-P.ppt HCCI and Stratified-Charge CI Engine Combustion Research Improving Efficiency

  19. Tuning the thermoelectric power factor in carbon nanotube films

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . Tuning the thermoelectric power factor in carbon nanotube films Ben Zhou 1 , Azure Avery 2 , Andrew Ferguson 2 , Jeff Blackburn 2 Schematic of a thermoelectric device. (wikipedia) Heat Thermoelectric Device Electricity Thermoelectrics Carbon Nanotubes Introduction * Single walled carbon nanotubes (SWCNTs) are promising thermoelectrics because of their good conductivity and one dimensional density of states. Materials and Methods * Ink Preparation: (7,5) nanotubes were dispersed by

  20. Factors influencing photocurrent generation in organic bulk heterojunction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    solar cells: interfacial energetics and blend microstructure | MIT-Harvard Center for Excitonics Factors influencing photocurrent generation in organic bulk heterojunction solar cells: interfacial energetics and blend microstructure April 29, 2009 at 3pm/36-428 Jenny Nelson Department of Physics Imperial College London jenny-nelson_000 abstract: The efficiency of photocurrent generation in conjugated polymer:small molecule blend solar is strongly influenced both by the energy level alignment

  1. Transcription factors for modification of lignin content in plants

    DOE Patents [OSTI]

    Wang, Huanzhong; Chen, Fang; Dixon, Richard A.

    2015-06-02

    The invention provides methods for modifying lignin, cellulose, xylan, and hemicellulose content in plants, and for achieving ectopic lignification and, for instance, secondary cell wall synthesis in pith cells, by altered regulation of a WRKY transcription factor. Nucleic acid constructs for altered WRKY-TF expression are described. Transgenic plants are provided that comprise modified pith cell walls, and lignin, cellulose, and hemicellulose content. Plants described herein may be used, for example, as improved biofuel feedstock and as highly digestible forage crops.

  2. Method for determining formation quality factor from seismic data

    DOE Patents [OSTI]

    Taner, M. Turhan; Treitel, Sven

    2005-08-16

    A method is disclosed for calculating the quality factor Q from a seismic data trace. The method includes calculating a first and a second minimum phase inverse wavelet at a first and a second time interval along the seismic data trace, synthetically dividing the first wavelet by the second wavelet, Fourier transforming the result of the synthetic division, calculating the logarithm of this quotient of Fourier transforms and determining the slope of a best fit line to the logarithm of the quotient.

  3. Structure of Plasmodium falciparum ADP-ribosylation factor 1

    SciTech Connect (OSTI)

    Cook, William J.; Smith, Craig D.; Senkovich, Olga; Holder, Anthony A.; Chattopadhyay, Debasish

    2011-09-26

    Vesicular trafficking may play a crucial role in the pathogenesis and survival of the malaria parasite. ADP-ribosylation factors (ARFs) are among the major components of vesicular trafficking pathways in eukaryotes. The crystal structure of ARF1 GTPase from Plasmodium falciparum has been determined in the GDP-bound conformation at 2.5 {angstrom} resolution and is compared with the structures of mammalian ARF1s.

  4. Limiting Factors for Convective Cloud Top Height in the Tropics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Limiting Factors for Convective Cloud Top Height in the Tropics M. P. Jensen and A. D. Del Genio National Aeronautics and Space Administration Goddard Institute for Space Studies Columbia University New York, New York Introduction Populations of tropical convective clouds are mainly comprised of three types: shallow trade cumulus, mid-level cumulus congestus and deep convective clouds (Johnson et al. 1999). Each of these cloud types has different impacts on the local radiation and water budgets.

  5. Method for factor analysis of GC/MS data

    DOE Patents [OSTI]

    Van Benthem, Mark H; Kotula, Paul G; Keenan, Michael R

    2012-09-11

    The method of the present invention provides a fast, robust, and automated multivariate statistical analysis of gas chromatography/mass spectroscopy (GC/MS) data sets. The method can involve systematic elimination of undesired, saturated peak masses to yield data that follow a linear, additive model. The cleaned data can then be subjected to a combination of PCA and orthogonal factor rotation followed by refinement with MCR-ALS to yield highly interpretable results.

  6. Simulation: Moving from Technology Challenge to Human Factors Success

    SciTech Connect (OSTI)

    Gould, Derek A.; Chalmers, Nicholas; Johnson, Sheena J.; Kilkenny, Caroline; White, Mark D.; Bech, Bo; Lonn, Lars; Bello, Fernando

    2012-06-15

    Recognition of the many limitations of traditional apprenticeship training is driving new approaches to learning medical procedural skills. Among simulation technologies and methods available today, computer-based systems are topical and bring the benefits of automated, repeatable, and reliable performance assessments. Human factors research is central to simulator model development that is relevant to real-world imaging-guided interventional tasks and to the credentialing programs in which it would be used.

  7. Human factors engineering report for the cold vacuum drying facility

    SciTech Connect (OSTI)

    IMKER, F.W.

    1999-06-30

    The purpose of this report is to present the results and findings of the final Human Factors Engineering (HFE) technical analysis and evaluation of the Cold Vacuum Drying Facility (CVDF). Ergonomics issues are also addressed in this report, as appropriate. This report follows up and completes the preliminary work accomplished and reported by the Preliminary HFE Analysis report (SNF-2825, Spent Nuclear Fuel Project Cold Vacuum Drying Facility Human Factors Engineering Analysis: Results and Findings). This analysis avoids redundancy of effort except for ensuring that previously recommended HFE design changes have not affected other parts of the system. Changes in one part of the system may affect other parts of the system where those changes were not applied. The final HFE analysis and evaluation of the CVDF human-machine interactions (HMI) was expanded to include: the physical work environment, human-computer interface (HCI) including workstation and software, operator tasks, tools, maintainability, communications, staffing, training, and the overall ability of humans to accomplish their responsibilities, as appropriate. Key focal areas for this report are the process bay operations, process water conditioning (PWC) skid, tank room, and Central Control Room operations. These key areas contain the system safety-class components and are the foundation for the human factors design basis of the CVDF.

  8. Critical success factors in implementing process safety management

    SciTech Connect (OSTI)

    Wilson, D.J. [Chevron USA, Inc., New Orleans, LA (United States)

    1996-08-01

    This paper focuses on several {open_quotes}Critical Success Factors {close_quotes} which will determine how well employees will embrace and utilize the changes being asked of them to implement Process Safety Management (PSM). These success factors are applicable to any change which involves asking employees to perform activities differently than they are currently performing them. This includes changes in work processes (the way we arrange and conduct a set of tasks) or changes in work activities (how we perform individual tasks). Simply developing new work processes and explaining them to employees is not enough to ensure that employees will actually utilize them -- no matter how good these processes are. To ensure successful, complete implementation of Process Safety Management, we must manage the transition from how we perform our work now to how we will perform it after PSM is implemented. Environmental and safety performance improvements, facility reliability and operability increases, and employee effectiveness and productivity gains CAN NOT be achieved until Process Safety Management processes are fully implemented. To successfully implement management of change, mechanical integrity, or any of the other processes in PSM, each of the following critical success factors must be carefully considered and utilized as appropriate. They are: (1) Vision of a Future State, Current State Assessment, and a Detailed Plan to Achieve the Future State, (2) Management Commitment, (3) Ownership by Key Individuals, (4) Justification for Actions, (5) Autonomy to Customize the Process, (6) Feedback Mechanism to Adjust Activities, and (7) Process to Refocus & Redirect Efforts.

  9. Energy Factor Analysis for Gas Heat Pump Water Heaters

    SciTech Connect (OSTI)

    Gluesenkamp, Kyle R

    2016-01-01

    Gas heat pump water heaters (HPWHs) can improve water heating efficiency with zero GWP and zero ODP working fluids. The energy factor (EF) of a gas HPWH is sensitive to several factors. In this work, expressions are derived for EF of gas HPWHs, as a function of heat pump cycle COP, tank heat losses, burner efficiency, electrical draw, and effectiveness of supplemental heat exchangers. The expressions are used to investigate the sensitivity of EF to each parameter. EF is evaluated on a site energy basis (as used by the US DOE for rating water heater EF), and a primary energy-basis energy factor (PEF) is also defined and included. Typical ranges of values for the six parameters are given. For gas HPWHs, using typical ranges for component performance, EF will be 59 80% of the heat pump cycle thermal COP (for example, a COP of 1.60 may result in an EF of 0.94 1.28). Most of the reduction in COP is due to burner efficiency and tank heat losses. Gas-fired HPWHs are theoretically be capable of an EF of up to 1.7 (PEF of 1.6); while an EF of 1.1 1.3 (PEF of 1.0 1.1) is expected from an early market entry.

  10. Dirac equation in low dimensions: The factorization method

    SciTech Connect (OSTI)

    Snchez-Monroy, J.A.; Quimbay, C.J.

    2014-11-15

    We present a general approach to solve the (1+1) and (2+1)-dimensional Dirac equations in the presence of static scalar, pseudoscalar and gauge potentials, for the case in which the potentials have the same functional form and thus the factorization method can be applied. We show that the presence of electric potentials in the Dirac equation leads to two KleinGordon equations including an energy-dependent potential. We then generalize the factorization method for the case of energy-dependent Hamiltonians. Additionally, the shape invariance is generalized for a specific class of energy-dependent Hamiltonians. We also present a condition for the absence of the Klein paradox (stability of the Dirac sea), showing how Dirac particles in low dimensions can be confined for a wide family of potentials. - Highlights: The low-dimensional Dirac equation in the presence of static potentials is solved. The factorization method is generalized for energy-dependent Hamiltonians. The shape invariance is generalized for energy-dependent Hamiltonians. The stability of the Dirac sea is related to the existence of supersymmetric partner Hamiltonians.

  11. Automatic Blocking Of QR and LU Factorizations for Locality

    SciTech Connect (OSTI)

    Yi, Q; Kennedy, K; You, H; Seymour, K; Dongarra, J

    2004-03-26

    QR and LU factorizations for dense matrices are important linear algebra computations that are widely used in scientific applications. To efficiently perform these computations on modern computers, the factorization algorithms need to be blocked when operating on large matrices to effectively exploit the deep cache hierarchy prevalent in today's computer memory systems. Because both QR (based on Householder transformations) and LU factorization algorithms contain complex loop structures, few compilers can fully automate the blocking of these algorithms. Though linear algebra libraries such as LAPACK provides manually blocked implementations of these algorithms, by automatically generating blocked versions of the computations, more benefit can be gained such as automatic adaptation of different blocking strategies. This paper demonstrates how to apply an aggressive loop transformation technique, dependence hoisting, to produce efficient blockings for both QR and LU with partial pivoting. We present different blocking strategies that can be generated by our optimizer and compare the performance of auto-blocked versions with manually tuned versions in LAPACK, both using reference BLAS, ATLAS BLAS and native BLAS specially tuned for the underlying machine architectures.

  12. Transfer Factors for Contaminant Uptake by Fruit and Nut Trees

    SciTech Connect (OSTI)

    Napier, Bruce A.; Fellows, Robert J.; Minc, Leah D.

    2013-11-20

    Transfer of radionuclides from soils into plants is one of the key mechanisms for long-term contamination of the human food chain. Nearly all computer models that address soil-to-plant uptake of radionuclides use empirically-derived transfer factors to address this process. Essentially all available soil-to-plant transfer factors are based on measurements in annual crops. Because very few measurements are available for tree fruits, samples were taken of alfalfa and oats and the stems, leaves, and fruits and nuts of almond, apple, apricot, carob, fig, grape, nectarine, pecan, pistachio (natural and grafted), and pomegranate, along with local surface soil. The samples were dried, ground, weighed, and analyzed for trace constituents through a combination of induction-coupled plasma mass spectrometry and instrumental neutron activation analysis for a wide range of naturally-occurring elements. Analysis results are presented and converted to soil-to-plant transfer factors. These are compared to commonly used and internationally recommended values. Those determined for annual crops are very similar to commonly-used values; those determined for tree fruits show interesting differences. Most macro- and micronutrients are slightly reduced in fruits; non-essential elements are reduced further. These findings may be used in existing computer models and may allow development of tree-fruit-specific transfer models.

  13. PHASER 2.10 methodology for dependence, importance, and sensitivity: The role of scale factors, confidence factors, and extremes

    SciTech Connect (OSTI)

    Cooper, J.A.

    1996-09-01

    PHASER (Probabilistic Hybrid Analytical System Evaluation Routine) is a software tool that has the capability of incorporating subjective expert judgment into probabilistic safety analysis (PSA) along with conventional data inputs. An earlier report described the PHASER methodology, but only gave a cursory explanation about how dependence was incorporated in Version 1.10 and about how ``Importance`` and ``Sensitivity`` measures were to be incorporated in Version 2.00. A more detailed description is given in this report. The basic concepts involve scale factors and confidence factors that are associated with the stochastic variability and subjective uncertainty (which are common adjuncts used in PSA), and the safety risk extremes that are crucial to safety assessment. These are all utilized to illustrate methodology for incorporating dependence among analysis variables in generating PSA results, and for Importance and Sensitivity measures associated with the results that help point out where any major sources of safety concern arise and where any major sources of uncertainty reside, respectively.

  14. Elevated epidermal growth factor receptor binding in plutonium-induced lung tumors from dogs

    SciTech Connect (OSTI)

    Leung, F.C.; Bohn, L.R.; Dagle, G.E. )

    1991-04-01

    The objective of this study is to examine and characterize epidermal growth factor receptor (EGF-R) binding in inhaled plutonium-induced canine lung-tumor tissue and to compare it with that in normal canine lung tissue. Crude membrane preparations from normal and lung-tumor tissue from beagle dogs were examined in a radioreceptor assay, using {sup 125}I-labeled epidermal growth factor (EGF) as a ligand. Specific EGF receptor binding was determined in the presence of excess unlabeled EGF. We have examined EGF receptor binding in eight lung-tumor samples obtained from six dogs. Epidermal growth factor receptor binding was significantly greater in lung-tumor samples (31.38%) compared with that in normal lung tissue (3.76%). Scatchard plot analysis from the displacement assay revealed that there was no statistical difference in the binding affinity but significantly higher concentration of EGF-R sites in the lung-tumor tissue (619 fmol/mg) than in normal lung tissue (53 fmol/mg). The increase in EGF-R number in plutonium-induced dog lung tumors does not seem to correlate with increase in the initial lung burden exposure to plutonium. Our results demonstrate that there is a significant increase in EGF-R binding in inhaled plutonium-induced dog lung tumors.

  15. Small-Chamber Measurements of Chemical-Specific Emission Factors for Drywall

    SciTech Connect (OSTI)

    Maddalena, Randy; Russell, Marion; Apte, Michael G.

    2010-06-01

    Imported drywall installed in U.S. homes is suspected of being a source of odorous and potentially corrosive indoor pollutants. To support an investigation of those building materials by the Consumer Products Safety Commission (CPSC), Lawrence Berkeley National Laboratory (LBNL) measured chemical-specific emission factors for 30 samples of drywall materials. Emission factors are reported for 75 chemicals and 30 different drywall samples encompassing both domestic and imported stock and incorporating natural, synthetic, or mixed gypsum core material. CPSC supplied all drywall materials. First the drywall samples were isolated and conditioned in dedicated chambers, then they were transferred to small chambers where emission testing was performed. Four sampling and analysis methods were utilized to assess (1) volatile organic compounds, (2) low molecular weight carbonyls, (3) volatile sulfur compounds, and (4) reactive sulfur gases. LBNL developed a new method that combines the use of solid phase microextraction (SPME) with small emission chambers to measure the reactive sulfur gases, then extended that technique to measure the full suite of volatile sulfur compounds. The testing procedure and analysis methods are described in detail herein. Emission factors were measured under a single set of controlled environmental conditions. The results are compared graphically for each method and in detailed tables for use in estimating indoor exposure concentrations.

  16. Factors affecting the concentration of outdoor particles indoors (COPI): Identification of data needs and existing data

    SciTech Connect (OSTI)

    Thatcher, Tracy L.; McKone, Thomas E.; Fisk, William J.; Sohn, Michael D.; Delp, Woody W.; Riley, William J.; Sextro, Richard G.

    2001-12-01

    The process of characterizing human exposure to particulate matter requires information on both particle concentrations in microenvironments and the time-specific activity budgets of individuals among these microenvironments. Because the average amount of time spent indoors by individuals in the US is estimated to be greater than 75%, accurate characterization of particle concentrations indoors is critical to exposure assessments for the US population. In addition, it is estimated that indoor particle concentrations depend strongly on outdoor concentrations. The spatial and temporal variations of indoor particle concentrations as well as the factors that affect these variations are important to health scientists. For them, knowledge of the factors that control the relationship of indoor particle concentrations to outdoor levels is particularly important. In this report, we identify and evaluate sources of data for those factors that affect the transport to and concentration of outdoor particles in the indoor environment. Concentrations of particles indoors depend upon the fraction of outdoor particles that penetrate through the building shell or are transported via the air handling (HVAC) system, the generation of particles by indoor sources, and the loss mechanisms that occur indoors, such as deposition. To address these issues, we (i) identify and assemble relevant information including the behavior of particles during air leakage, HVAC operations, and particle filtration; (ii) review and evaluate the assembled information to distinguish data that are directly relevant to specific estimates of particle transport from those that are only indirectly useful and (iii) provide a synthesis of the currently available information on building air-leakage parameters and their effect on indoor particle matter concentrations.

  17. Factors affecting expanded electricity trade in North America

    SciTech Connect (OSTI)

    Hill, L.J.

    1994-01-01

    The authors explore factors that affect electricity trade between enterprises in the US and Canada and the US and Mexico. They look to those underlying policy and institutional factors that affect the relative costs of producing electricity in the three countries. In particular, they consider six factors that appear to have a significant impact on electricity trade in North America: differences in the types of economic regulation of power leading to differences in cost recovery for wholesale and retail power and wheeling charges; changing regulatory attitudes, placing more emphasis on demand-side management and environmental concerns; differences in energy and economic policies; differences in national and subnational environmental policies; changing organization of electric power industries which may foster uncertainty, change historical relationships, and provide other potentially important sources of power for distribution utilities; and differences in the ability of enterprises to gain access to electric power markets because of restrictions placed on transmission access. In Section 2, the authors discuss the regulation of electricity trade in North America and provide an overview of the recent trading experience for electricity between Canada and the US and between Mexico and the US, including the volume of that trade over the past decade and existing transmission capacity between regions of the three countries. In Section 3, they look at the benefits that accrue to trading counties and what those benefits are likely to be for the three countries. The discussion in Section 4 centers on the relevant provisions of the Canada Free Trade Agreement and the proposed North American Free Trade Agreement. In Section 5, they set the stage for the discussion of policy and institutional differences presented in Section 6 by outlining differences in the organization of the electric power sectors of Canada, the US, and Mexico. The study is synthesized in Section 7.

  18. On the relationship between formation resistivity factor and porosity

    SciTech Connect (OSTI)

    Perez-Rosales, C.

    1982-08-01

    A theory on the relationship between formation resistivity factor and porosity is presented. This theory considers that, from the standpoint of the flow of electric current within a porous medium saturated with a conducting fluid, the pore space can be divided into flowing and stagnant regions. This assumption leads to a general expression, and formulas currently used in practice are special cases of this expression. The validity of the new expression is established by the use of data corresponding to sandstones and packings and suspensions of particles. For the case of natural rocks, the theory confirms Darcy's equation and gives an interpretation of the physical significance of the so-called cementation exponent.

  19. Pion Form Factor in Improved Holographic QCD Backgrounds

    SciTech Connect (OSTI)

    Kwee, Herry J.

    2010-08-05

    We extend our recent numerical calculation of the pion electromagnetic form factor F{sub {pi}}(Q{sup 2}) in holographic QCD with a background field that interpolates between 'hard-wall' and 'soft-wall' models to obtain an improved model that reproduces the desirable phenomenological features of both. In all cases, F{sub {pi}}for large Q{sup 2} is shallower than data, an effect that can be cured by relaxing the fit to one of the static observables, particularly the decay constant f{sub {pi}}.

  20. Greybody factors and charges in Kerr/CFT

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cvetič, Mirjam; Larsen, Finn

    2009-09-01

    We compute greybody factors for near extreme Kerr black holes in D = 4 and D = 5. In D = 4 we include four charges so that our solutions can be continuously deformed to the BPS limit. In D = 5 we include two independent angular momenta so Left-Right symmetry is incorporated. We discuss the CFT interpretation of our emission amplitudes, including the overall frequency dependence and the dependence on all black hole parameters. We find that all additional parameters can be incorporated Kerr/CFT, with central charge independent of U(1) charges.

  1. Gyromagnetic factors in {sup 144-150}Nd

    SciTech Connect (OSTI)

    Giannatiempo, A.

    2011-09-15

    The U(5) to SU(3) evolution of the nuclear structure in the even {sup 144-156}Nd isotopes has been investigated in the framework of the interacting boson approximation (IBA-2) model, taking into account the effect of the partial Z=64 subshell closure on the structure of the states of a collective nature. The analysis, which led to a satisfactory description of excitation energy patterns, quadrupole moments, and decay properties of the states (even when important M1 components were present in the transitions), is extended to the available data on g factors, in {sup 144-150}Nd. Their values are reasonably reproduced by the calculations.

  2. Kaon semileptonic vector form factor and determination of |Vus| using

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    staggered fermions | Argonne Leadership Computing Facility Kaon semileptonic vector form factor and determination of |Vus| using staggered fermions Authors: A. Bazavov, C. Bernard, C. M. Bouchard, C. DeTar, Daping Du, A. X. El-Khadra, J. Foley, E. D. Freeland6, E. Gámiz, Steven Gottlieb, U. M. Heller, Jongjeong Kim, A. S. Kronfeld, J. Laiho, L. Levkova, P. B. Mackenzie, E. T. Neil, M. B. Oktay, Si-Wei Qiu, J. N. Simone, R. Sugar, D. Toussaint, R. S. Van de Water, Ran Zhou Using staggered

  3. Effectiveness factors for hydroprocessing of coal and coal liquids

    SciTech Connect (OSTI)

    Massoth, F.E.; Seader, J.D.

    1990-03-29

    The aim of this project is to develop a methodology to predict, from a knowledge of feed and catalyst properties, effectiveness factors for catalytic hydroprocessing of coal and coal liquids. To achieve this aim, it is necessary to account for restrictive diffusion, which has not hitherto been done from a fundamental approach under reaction conditions. The research entails a study of hydrodenitrogenation of model compounds and coal-derived liquids using three NiMo/alumina catalysts of different pore size to develop, for restrictive diffusion, a relationship that can be used for estimating reliable effectiveness factors. The research program includes: Task A - measurement of pertinent properties of the catalysts and of several coal liquids; Task B - determination of effective diffusivities and turtuosities of the catalysts; Task C - development of restrictive diffusion correlations from data on model N-compound reactions; Task D - testing of correlations with coal-liquid cuts and whole coal-liquid feed. Results are presented and discussed from Tasks B and D. 9 refs., 6 figs., 4 tabs.

  4. Effectiveness factors for hydroprocessing of coal and coal liquids

    SciTech Connect (OSTI)

    Massoth, F.E.; Seader, J.D.

    1990-01-01

    The aim of this research project is to develop a methodology to predict, from a knowledge of feed and catalyst properties, effectiveness factors for catalytic hydroprocessing of coal and coal liquids. To achieve this aim, it is necessary to account for restrictive diffusion, which has not hitherto been done from a fundamental approach under reaction conditions. The research proposed here entails a study of hydrodenitrogenation of model compounds and coal-derived liquids using three NiMo/alumina catalysts of different pore size to develop, for restrictive diffusion, a relationship that can be used for estimating reliable effectiveness factors. The program is divided into four parts: measurements of pertinent properties of the catalysts and of a coal liquid and its derived boiling-point cuts; determination of effective diffusivities and tortuosities of the catalysts; development of restrictive diffusion correlations from data on model N-compounds at reaction conditions; and testing of correlations with coal-liquid cuts and whole coal-liquid feed, modifying correlations as necessary.

  5. Human factors issues in qualitative and quantitative safety analyses

    SciTech Connect (OSTI)

    Hahn, H.A.

    1993-10-01

    Humans are a critical and integral part of any operational system, be it a nuclear reactor, a facility for assembly or disassembling hazardous components, or a transportation network. In our concern over the safety of these systems, we often focus our attention on the hardware engineering components of such systems. However, experience has repeatedly demonstrated that it is often the human component that is the primary determinant of overall system safety. Both the nuclear reactor accidents at Chernobyl and Three Mile Island and shipping disasters such as the Exxon Valdez and the Herald of Free Enterprise accidents are attributable to human error. Concern over human contributions to system safety prompts us to include reviews of human factors issues in our safety analyses. In the conduct of Probabilistic Risk Assessments (PRAs), human factors issues are addressed using a quantitative method called Human Reliability Analysis (HRA). HRAs typically begin with the identification of potential sources of human error in accident sequences of interest. Human error analysis often employs plant and/or procedures walk-downs in which the analyst considers the ``goodness`` of procedures, training, and human-machine interfaces concerning their potential contribution to human error. Interviews with expert task performers may also be conducted. In the application of HRA, once candidate sources of human error have been identified, error probabilities are developed.

  6. Asymptotic, multigroup flux reconstruction and consistent discontinuity factors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Trahan, Travis J.; Larsen, Edward W.

    2015-05-12

    Recent theoretical work has led to an asymptotically derived expression for reconstructing the neutron flux from lattice functions and multigroup diffusion solutions. The leading-order asymptotic term is the standard expression for flux reconstruction, i.e., it is the product of a shape function, obtained through a lattice calculation, and the multigroup diffusion solution. The first-order asymptotic correction term is significant only where the gradient of the diffusion solution is not small. Inclusion of this first-order correction term can significantly improve the accuracy of the reconstructed flux. One may define discontinuity factors (DFs) to make certain angular moments of the reconstructed fluxmore » continuous across interfaces between assemblies in 1-D. Indeed, the standard assembly discontinuity factors make the zeroth moment (scalar flux) of the reconstructed flux continuous. The inclusion of the correction term in the flux reconstruction provides an additional degree of freedom that can be used to make two angular moments of the reconstructed flux continuous across interfaces by using current DFs in addition to flux DFs. Thus, numerical results demonstrate that using flux and current DFs together can be more accurate than using only flux DFs, and that making the second angular moment continuous can be more accurate than making the zeroth moment continuous.« less

  7. Making tensor factorizations robust to non-gaussian noise.

    SciTech Connect (OSTI)

    Chi, Eric C.; Kolda, Tamara Gibson

    2011-03-01

    Tensors are multi-way arrays, and the CANDECOMP/PARAFAC (CP) tensor factorization has found application in many different domains. The CP model is typically fit using a least squares objective function, which is a maximum likelihood estimate under the assumption of independent and identically distributed (i.i.d.) Gaussian noise. We demonstrate that this loss function can be highly sensitive to non-Gaussian noise. Therefore, we propose a loss function based on the 1-norm because it can accommodate both Gaussian and grossly non-Gaussian perturbations. We also present an alternating majorization-minimization (MM) algorithm for fitting a CP model using our proposed loss function (CPAL1) and compare its performance to the workhorse algorithm for fitting CP models, CP alternating least squares (CPALS).

  8. Control of mechanically activated polymersome fusion: Factors affecting fusion

    SciTech Connect (OSTI)

    Henderson, Ian M.; Paxton, Walter F.

    2014-12-15

    Previously we have studied the mechanically-activated fusion of extruded (200 nm) polymer vesicles into giant polymersomes using agitation in the presence of salt. In this study we have investigated several factors contributing to this phenomenon, including the effects of (i) polymer vesicle concentration, (ii) agitation speed and duration, and iii) variation of the salt and its concentration. It was found that increasing the concentration of the polymer dramatically increases the production of giant vesicles through the increased collisions of polymersomes. Our investigations also found that increasing the frequency of agitation increased the efficiency of fusion, though ultimately limited the size of vesicle which could be produced due to the high shear involved. Finally it was determined that salt-mediation of the fusion process was not limited to NaCl, but is instead a general effect facilitated by the presence of solvated ionic compounds, albeit with different salts initiating fusion at different concentration.

  9. Control of mechanically activated polymersome fusion: Factors affecting fusion

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Henderson, Ian M.; Paxton, Walter F.

    2014-12-15

    Previously we have studied the mechanically-activated fusion of extruded (200 nm) polymer vesicles into giant polymersomes using agitation in the presence of salt. In this study we have investigated several factors contributing to this phenomenon, including the effects of (i) polymer vesicle concentration, (ii) agitation speed and duration, and iii) variation of the salt and its concentration. It was found that increasing the concentration of the polymer dramatically increases the production of giant vesicles through the increased collisions of polymersomes. Our investigations also found that increasing the frequency of agitation increased the efficiency of fusion, though ultimately limited the sizemore » of vesicle which could be produced due to the high shear involved. Finally it was determined that salt-mediation of the fusion process was not limited to NaCl, but is instead a general effect facilitated by the presence of solvated ionic compounds, albeit with different salts initiating fusion at different concentration.« less

  10. Factors relevant to utility integration of intermittent renewable technologies

    SciTech Connect (OSTI)

    Wan, Yih-huei; Parsons, B.K.

    1993-08-01

    This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among findings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface; (2) cost penalties have not occurred at low to moderate penetration levels (and high levels are feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also identified.

  11. Factorization method and new potentials from the inverted oscillator

    SciTech Connect (OSTI)

    Bermudez, David Fernndez C, David J.

    2013-06-15

    In this article we will apply the first- and second-order supersymmetric quantum mechanics to obtain new exactly-solvable real potentials departing from the inverted oscillator potential. This system has some special properties; in particular, only very specific second-order transformations produce non-singular real potentials. It will be shown that these transformations turn out to be the so-called complex ones. Moreover, we will study the factorization method applied to the inverted oscillator and the algebraic structure of the new Hamiltonians. -- Highlights: We apply supersymmetric quantum mechanics to the inverted oscillator potential. The complex second-order transformations allow us to build new non-singular potentials. The algebraic structure of the initial and final potentials is analyzed. The initial potential is described by a complex-deformed HeisenbergWeyl algebra. The final potentials are described by polynomial Heisenberg algebras.

  12. Meson Transition Form Factors in Light-Front Holographic QCD

    SciTech Connect (OSTI)

    Brodsky, Stanley J.; Cao, Fu-Guang; de Teramond, Guy F.; /Costa Rica U.

    2011-06-22

    We study the photon-to-meson transition form factors (TFFs) F{sub M{gamma}}(Q{sup 2}) for {gamma}{gamma}* {yields} M using light-front holographic methods. The Chern-Simons action, which is a natural form in 5-dimensional anti-de Sitter (AdS) space, leads directly to an expression for the photon-to-pion TFF for a class of confining models. Remarkably, the predicted pion TFF is identical to the leading order QCD result where the distribution amplitude has asymptotic form. The Chern-Simons form is local in AdS space and is thus somewhat limited in its predictability. It only retains the q{bar q} component of the pion wavefunction, and further, it projects out only the asymptotic form of the meson distribution amplitude. It is found that in order to describe simultaneously the decay process {pi}{sup 0} {yields} {gamma}{gamma} and the pion TFF at the asymptotic limit, a probability for the q{bar q} component of the pion wavefunction P{sub q{bar q}} = 0.5 is required; thus giving indication that the contributions from higher Fock states in the pion light-front wavefunction need to be included in the analysis. The probability for the Fock state containing four quarks (anti-quarks) which follows from analyzing the hadron matrix elements, P{sub q{bar q}q{bar q}} {approx} 10%, agrees with the analysis of the pion elastic form factor using light-front holography including higher Fock components in the pion wavefunction. The results for the TFFs for the {eta} and {eta}{prime} mesons are also presented. The rapid growth of the pion TFF exhibited by the BABAR data at high Q{sup 2} is not compatible with the models discussed in this article, whereas the theoretical calculations are in agreement with the experimental data for the {eta} and {eta}{prime} TFFs.

  13. Rf2a and rf2b transcription factors

    DOE Patents [OSTI]

    Beachy, Roger N.; Petruccelli, Silvana; Dai, Shunhong

    2007-10-02

    A method of activating the rice tungro bacilliform virus (RTBV) promoter in vivo is disclosed. The RTBV promoter is activated by exposure to at least one protein selected from the group consisting of Rf2a and Rf2b.

  14. LATTICE WITH SMALLER MOMENTUM COMPACTION FACTOR FOR PEP-II HIGH...

    Office of Scientific and Technical Information (OSTI)

    LATTICE WITH SMALLER MOMENTUM COMPACTION FACTOR FOR PEP-II HIGH ENERGY RING Citation Details In-Document Search Title: LATTICE WITH SMALLER MOMENTUM COMPACTION FACTOR FOR PEP-II ...

  15. Neutron and Gamma-Ray Kerma Factors Based on LLNL Nuclear Data Files.

    Energy Science and Technology Software Center (OSTI)

    1991-07-08

    Version 00 Kerma factors are used extensively in biomedical applications. Specifically, neutron kerma factors are used in determining heating in materials of interest from neutron-induced reactions in fission or fusion power applications.

  16. Energy Price Indices and Discount Factors for Life-Cycle Cost...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015 Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2015 Handbook describes the annual ...

  17. Central safety factor and β N control on NSTX-U via beam power...

    Office of Scientific and Technical Information (OSTI)

    Central safety factor and N control on NSTX-U via beam power and plasma boundary shape ... Citation Details In-Document Search Title: Central safety factor and N control on ...

  18. Human Factors for Situation Assessment in Grid Operations

    SciTech Connect (OSTI)

    Guttromson, Ross T.; Schur, Anne; Greitzer, Frank L.; Paget, Mia L.

    2007-08-08

    Executive Summary Despite advances in technology, power system operators must assimilate overwhelming amounts of data to keep the grid operating. Analyses of recent blackouts have clearly demonstrated the need to enhance the operators situation awareness (SA). The long-term objective of this research is to integrate valuable technologies into the grid operator environment that support decision making under normal and abnormal operating conditions and remove non-technical barriers to enable the optimum use of these technologies by individuals working alone and as a team. More specifically, the research aims to identify methods and principles to increase SA of grid operators in the context of system conditions that are representative or common across many operating entities and develop operationally relevant experimental methods for studying technologies and operational practices which contribute to SA. With increasing complexity and interconnectivity of the grid, the scope and complexity of situation awareness have grown. New paradigms are needed to guide research and tool development aimed to enhance and improve operations. In reviewing related research, operating practices, systems, and tools, the present study established a taxonomy that provides a perspective on research and development surrounding power grid situation awareness and clarifies the field of human factors/SA for grid operations. Information sources that we used to identify critical factors underlying SA included interviews with experienced operational personnel, available historical summaries and transcripts of abnormal conditions and outages (e.g., the August 14, 2003 blackout), scientific literature, and operational policies/procedures and other documentation. Our analysis of August 2003 blackout transcripts and interviews adopted a different perspective than previous analyses of this material, and we complemented this analysis with additional interviews. Based on our analysis and a broad

  19. Global Agricultural Supply and Demand: Factors Contributing to the Recent Increase in Food Commodity Prices

    SciTech Connect (OSTI)

    none,

    2008-05-01

    This report discusses the factors that have led to global food commodity price inflaction and addresses the resulting implications.

  20. Meson transition form factors in light-front holographic QCD

    SciTech Connect (OSTI)

    Brodsky, Stanley J.; Cao Fuguang; de Teramond, Guy F.

    2011-10-01

    We study the photon-to-meson transition form factors (TFFs) F{sub M}{gamma}(Q{sup 2}) for {gamma}{gamma}{sup *}{yields}M using light-front holographic methods. The Chern-Simons action, which is a natural form in five-dimensional anti-de Sitter (AdS) space, is required to describe the anomalous coupling of mesons to photons using holographic methods and leads directly to an expression for the photon-to-pion TFF for a class of confining models. Remarkably, the predicted pion TFF is identical to the leading order QCD result where the distribution amplitude has asymptotic form. The Chern-Simons form is local in AdS space and is thus somewhat limited in its predictability. It only retains the qq component of the pion wave function, and further, it projects out only the asymptotic form of the meson distribution amplitude. It is found that in order to describe simultaneously the decay process {pi}{sup 0}{yields}{gamma}{gamma} and the pion TFF at the asymptotic limit, a probability for the qq component of the pion wave function P{sub qq}=0.5 is required, thus giving indication that the contributions from higher Fock states in the pion light-front wave function need to be included in the analysis. The probability for the Fock state containing four quarks P{sub qqqq}{approx}10%, which follows from analyzing the hadron matrix elements for a dressed current model, agrees with the analysis of the pion elastic form factor using light-front holography including higher Fock components in the pion wave function. The results for the TFFs for the {eta} and {eta}{sup '} mesons are also presented. The rapid growth of the pion TFF exhibited by the BABAR data at high Q{sup 2} is not compatible with the models discussed in this article, whereas the theoretical calculations are in agreement with the experimental data for the {eta} and {eta}{sup '} TFFs.

  1. Decommissioning Cost Estimating Factors And Earned Value Integration

    SciTech Connect (OSTI)

    Sanford, P.C.; Cimmarron, E.

    2008-07-01

    The Rocky Flats 771 Project progressed from the planning stage of decommissioning a plutonium facility, through the strip-out of highly-contaminated equipment, removal of utilities and structural decontamination, and building demolition. Actual cost data was collected from the strip-out activities and compared to original estimates, allowing the development of cost by equipment groupings and types and over time. Separate data was developed from the project control earned value reporting and compared with the equipment data. The paper discusses the analysis to develop the detailed factors for the different equipment types, and the items that need to be considered during characterization of a similar facility when preparing an estimate. The factors are presented based on direct labor requirements by equipment type. The paper also includes actual support costs, and examples of fixed or one-time start-up costs. The integration of the estimate and the earned value system used for the 771 Project is also discussed. The paper covers the development of the earned value system as well as its application to a facility to be decommissioned and an existing work breakdown structure. Lessons learned are provided, including integration with scheduling and craft supervision, measurement approaches, and verification of scope completion. In summary: The work of decommissioning the Rocky Flats 771 Project process equipment was completed in 2003. Early in the planning process, we had difficulty in identifying credible data and implementing processes for estimating and controlling this work. As the project progressed, we were able to collect actual data on the costs of removing plutonium contaminated equipment from various areas over the life of this work and associate those costs with individual pieces of equipment. We also were able to develop and test out a system for measuring the earned value of a decommissioning project based on an evolving estimate. These were elements that

  2. Extracellular nonmitogenic angiogenesis factor and method of isolation thereof from wound fluid

    DOE Patents [OSTI]

    Banda, M.J.; Werb, Z.; Knighton, D.R.; Hunt, T.K.

    1985-03-05

    A nonmitogenic angiogenesis factor is isolated from wound fluid by dialysis to include materials in the molecular size range of 2,000 to 14,000, lyophilization, and chromatography. The nonmitogenic angiogenesis factor is identified by activity by corneal implant assay and by cell migration assay. The angiogenesis factor is also characterized by inactivity by mitogenesis assay. 3 figs.

  3. Extracellular nonmitogenic angiogenesis factor and method of isolation thereof from wound fluid

    DOE Patents [OSTI]

    Banda, Michael J.; Werb, Zena; Knighton, David R.; Hunt, Thomas K.

    1985-01-01

    A nonmitogenic angiogenesis factor is isolated from wound fluid by dialysis to include materials in the molecular size range of 2,000 to 14,000, lyophilization, and chromatography. The nonmitogenic angiogenesis factor is identified by activity by corneal implant assay and by cell migration assay. The angiogenesis factor is also characterized by inactivity by mitogenesis assay.

  4. A Review of Operational Water Consumption and Withdrawal Factors for Electricity Generating Technologies

    SciTech Connect (OSTI)

    Macknick, Jordan; Newmark, Robin; Heath, Garvin; Hallett, K. C.

    2011-03-01

    This report provides estimates of operational water withdrawal and water consumption factors for electricity generating technologies in the United States. Estimates of water factors were collected from published primary literature and were not modified except for unit conversions. The presented water factors may be useful in modeling and policy analyses where reliable power plant level data are not available.

  5. Factors controlling pathogen destruction during anaerobic digestion of biowastes

    SciTech Connect (OSTI)

    Smith, S.R. . E-mail: s.r.smith@imperial.ac.uk; Lang, N.L.; Cheung, K.H.M.; Spanoudaki, K.

    2005-07-01

    Anaerobic digestion is the principal method of stabilising biosolids from urban wastewater treatment in the UK, and it also has application for the treatment of other types of biowaste. Increasing awareness of the potential risks to human and animal health from environmental sources of pathogens has focused attention on the efficacy of waste treatment processes at destroying pathogenic microorganisms in biowastes recycled to agricultural land. The degree of disinfection achieved by a particular anaerobic digester is influenced by a variety of interacting operational variables and conditions, which can often deviate from the ideal. Experimental investigations demonstrate that Escherichia coli and Salmonella spp. are not damaged by mesophilic temperatures, whereas rapid inactivation occurs by thermophilic digestion. A hydraulic, biokinetic and thermodynamic model of pathogen inactivation during anaerobic digestion showed that a 2 log{sub 10} reduction in E. coli (the minimum removal required for agricultural use of conventionally treated biosolids) is likely to challenge most conventional mesophilic digesters, unless strict maintenance and management practices are adopted to minimise dead zones and by-pass flow. Efficient mixing and organic matter stabilisation are the main factors controlling the rate of inactivation under mesophilic conditions and not a direct effect of temperature per se on pathogenic organisms.

  6. Highly Efficient Small Form Factor LED Retrofit Lamp

    SciTech Connect (OSTI)

    Steven Allen; Fred Palmer; Ming Li

    2011-09-11

    This report summarizes work to develop a high efficiency LED-based MR16 lamp downlight at OSRAM SYLVANIA under US Department of Energy contract DE-EE0000611. A new multichip LED package, electronic driver, and reflector optic were developed for these lamps. At steady-state, the lamp luminous flux was 409 lumens (lm), luminous efficacy of 87 lumens per watt (LPW), CRI (Ra) of 87, and R9 of 85 at a correlated color temperature (CCT) of 3285K. The LED alone achieved 120 lumens per watt efficacy and 600 lumen flux output at 25 C. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.90 at a power of only 5 watts. Compared to similar existing MR16 lamps using LED sources, these lamps had much higher efficacy and color quality. The objective of this work was to demonstrate a LED-based MR16 retrofit lamp for replacement of 35W halogen MR16 lamps having (1) luminous flux of 500 lumens, (2) luminous efficacy of 100 lumens per watt, (3) beam angle less than 40{sup o} and center beam candlepower of at least 1000 candelas, and (4) excellent color quality.

  7. Sugarcane transgenics expressing MYB transcription factors show improved glucose release

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Poovaiah, Charleson R.; Bewg, William P.; Lan, Wu; Ralph, John; Coleman, Heather D.

    2016-07-15

    In this study, sugarcane, a tropical C4 perennial crop, is capable of producing 30-100 tons or more of biomass per hectare annually. The lignocellulosic residue remaining after sugar extraction is currently underutilized and can provide a significant source of biomass for the production of second-generation bioethanol. As a result, MYB31 and MYB42 were cloned from maize and expressed in sugarcane with and without the UTR sequences. The cloned sequences were 98 and 99 % identical to the published nucleotide sequences. The inclusion of the UTR sequences did not affect any of the parameters tested. There was little difference in plantmore » height and the number of internodes of the MYB-overexpressing sugarcane plants when compared with controls. MYB transgene expression determined by qPCR exhibited continued expression in young and maturing internodes. MYB31 downregulated more genes within the lignin biosynthetic pathway than MYB42. MYB31 and MYB42 expression resulted in decreased lignin content in some lines. All MYB42 plants further analyzed showed significant increases in glucose release by enzymatic hydrolysis in 72 h, whereas only two MYB31 plants released more glucose than control plants. This correlated directly with a significant decrease in acid-insoluble lignin. Soluble sucrose content of the MYB42 transgenic plants did not vary compared to control plants. In conclusion, this study demonstrates the use of MYB transcription factors to improve the production of bioethanol from sugarcane bagasse remaining after sugar extraction.« less

  8. Hyperdynamics boost factor achievable with an ideal bias potential

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Huang, Chen; Perez, Danny; Voter, Arthur F.

    2015-08-20

    Hyperdynamics is a powerful method to significantly extend the time scales amenable to molecular dynamics simulation of infrequent events. One outstanding challenge, however, is the development of the so-called bias potential required by the method. In this work, we design a bias potential using information about all minimum energy pathways (MEPs) out of the current state. While this approach is not suitable for use in an actual hyperdynamics simulation, because the pathways are generally not known in advance, it allows us to show that it is possible to come very close to the theoretical boost limit of hyperdynamics while maintainingmore » high accuracy. We demonstrate this by applying this MEP-based hyperdynamics (MEP-HD) to metallic surface diffusion systems. In most cases, MEP-HD gives boost factors that are orders of magnitude larger than the best existing bias potential, indicating that further development of hyperdynamics bias potentials could have a significant payoff. Lastly, we discuss potential practical uses of MEP-HD, including the possibility of developing MEP-HD into a true hyperdynamics.« less

  9. Factors governing sustainable groundwater pumping near a river

    SciTech Connect (OSTI)

    Zhang, Y.; Hubbard, S.S.; Finsterle, S.

    2011-01-15

    The objective of this paper is to provide new insights into processes affecting riverbank filtration (RBF). We consider a system with an inflatable dam installed for enhancing water production from downstream collector wells. Using a numerical model, we investigate the impact of groundwater pumping and dam operation on the hydrodynamics in the aquifer and water production. We focus our study on two processes that potentially limit water production of an RBF system: the development of an unsaturated zone and riverbed clogging. We quantify river clogging by calibrating a time-dependent riverbed permeability function based on knowledge of pumping rate, river stage, and temperature. The dynamics of the estimated riverbed permeability reflects clogging and scouring mechanisms. Our results indicate that (1) riverbed permeability is the dominant factor affecting infiltration needed for sustainable RBF production; (2) dam operation can influence pumping efficiency and prevent the development of an unsaturated zone beneath the riverbed only under conditions of sufficient riverbed permeability; (3) slow river velocity, caused by dam raising during summer months, may lead to sedimentation and deposition of fine-grained material within the riverbed, which may clog the riverbed, limiting recharge to the collector wells and contributing to the development of an unsaturated zone beneath the riverbed; and (4) higher river flow velocities, caused by dam lowering during winter storms, scour the riverbed an thus increase its permeability. These insights can be used as the basis for developing sustainable water management of a RBF system.

  10. Safety culture management: The importance of organizational factors

    SciTech Connect (OSTI)

    Haber, S.B.; Shurberg, D.A.; Jacobs, R.; Hofmann, D.

    1995-05-01

    The concept of safety culture has been used extensively to explain the underlying causes of performance based events, both positive and negative, across the nuclear industry. The work described in this paper represents several years of effort to identify, define and assess the organizational factors important to safe performance in nuclear power plants (NPPs). The research discussed in this paper is primarily conducted in support of the US Nuclear Regulatory Commission`s (NRC) efforts in understanding the impact of organizational performance on safety. As a result of a series of research activities undertaken by numerous NRC contractors, a collection of organizational dimensions has been identified and defined. These dimensions represent what is believed to be a comprehensive taxonomy of organizational elements that relate to the safe operation of nuclear power plants. Techniques were also developed by which to measure these organizational dimensions, and include structured interview protocols, behavioral checklists, and behavioral anchored rating scales (BARS). Recent efforts have focused on devising a methodology for the extraction of information related to the identified organizational dimensions from existing NRC documentation. This type of effort would assess the applicability of the organizational dimensions to existing NRC inspection and evaluation reports, refine the organizational dimensions previously developed so they are more relevant to the task of retrospective analysis, and attempt to rate plants based on the review of existing NRC documentation using the techniques previously developed for the assessment of organizational dimensions.

  11. Factors influencing radiation therapy student clinical placement satisfaction

    SciTech Connect (OSTI)

    Bridge, Pete; Carmichael, Mary-Ann

    2014-02-15

    Introduction: Radiation therapy students at Queensland University of Technology (QUT) attend clinical placements at five different clinical departments with varying resources and support strategies. This study aimed to determine the relative availability and perceived importance of different factors affecting student support while on clinical placement. The purpose of the research was to inform development of future support mechanisms to enhance radiation therapy students experience on clinical placement. Methods: This study used anonymous Likert-style surveys to gather data from years 1 and 2 radiation therapy students from QUT and clinical educators from Queensland relating to availability and importance of support mechanisms during clinical placements in a semester. Results: The study findings demonstrated student satisfaction with clinical support and suggested that level of support on placement influenced student employment choices. Staff support was perceived as more important than physical resources; particularly access to a named mentor, a clinical educator and weekly formative feedback. Both students and educators highlighted the impact of time pressures. Conclusions: The support offered to radiation therapy students by clinical staff is more highly valued than physical resources or models of placement support. Protected time and acknowledgement of the importance of clinical education roles are both invaluable. Joint investment in mentor support by both universities and clinical departments is crucial for facilitation of effective clinical learning.

  12. Factors affecting coking pressures in tall coke ovens

    SciTech Connect (OSTI)

    Grimley, J.J.; Radley, C.E.

    1995-12-01

    The detrimental effects of excessive coking pressures, resulting in the permanent deformation of coke oven walls, have been recognized for many years. Considerable research has been undertaken worldwide in attempts to define the limits within which a plant may safely operate and to quantify the factors which influence these pressures. Few full scale techniques are available for assessing the potential of a coal blend for causing wall damage. Inference of dangerous swelling pressures may be made however by the measurement of the peak gas pressure which is generated as the plastic layers meet and coalesce at the center of the oven. This pressure is referred to in this report as the carbonizing pressure. At the Dawes Lane cokemaking plant of British Steel`s Scunthorpe Works, a large database has been compiled over several years from the regulator measurement of this pressure. This data has been statistically analyzed to provide a mathematical model for predicting the carbonizing pressure from the properties of the component coals, the results of this analysis are presented in this report.

  13. Field Derived Emission Factors For Formaldehyde and other Volatile Organic Compounds in FEMA Temporary Housing Units

    SciTech Connect (OSTI)

    Parthasarathy, Srinandini; Maddalena, Randy L.; Russell, Marion L.; Apte, Michael G.

    2010-10-01

    Sixteen previously occupied temporary housing units (THUs) were studied to assess emissions of volatile organic compounds. The whole trailer emission factors wereevaluated for 36 VOCs including formaldehyde. Indoor sampling was carried out in the THUs located in Purvis staging yard in Mississippi, USA. Indoor temperature andrelative humidity (RH) were also measured in all the trailers during sampling. Indoor temperatures were varied (increased or decreased) in a selection of THUs using theheating, ventilation and air conditioning (HVAC) systems. Indoor temperatures during sampling ranged from 14o C to 33o C, and relative humidity (RH) varied between 35percentand 74percent. Ventilation rates were increased in some trailers using bathroom fans and vents during some of the sampling events. Ventilation rates measured during some aselection of sampling events varied from 0.14 to 4.3 h-1. Steady state indoor formaldehyde concentrations ranged from 10 mu g-m-3 to 1000 mu g-m-3. The formaldehyde concentrations in the trailers were of toxicological significance. The effects of temperature, humidity and ventilation rates were also studied. A linearregression model was built using log of percentage relative humidity, inverse of temperature (in K-1), and inverse log ACH as continuous independent variables, trailermanufacturer as a categorical independent variable, and log of the chemical emission factors as the dependent variable. The coefficients of inverse temperature, log relativehumidity, log inverse ACH with log emission factor were found to be statistically significant for all the samples at the 95percent confidence level. The regression model wasfound to explain about 84percent of the variation in the dependent variable. Most VOC concentrations measured indoors in the Purvis THUs were mostly found to be belowvalues reported in earlier studies by Maddalena et al.,1,2 Hodgson et al.,3 and Hippelein4. Emissions of TMPB-DIB (a plasticizer found in vinyl products) were found

  14. Relating transverse-momentum-dependent and collinear factorization theorems in a generalized formalism

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Collins, J.; Gamberg, L.; Prokudin, A.; Rogers, T. C.; Sato, N.; Wang, B.

    2016-08-08

    We construct an improved implementation for combining TMD factorization transverse- momentum-dependent (TMD) factorization and collinear factorization. TMD factorization is suit- able for low transverse momentum physics, while collinear factorization is suitable for high transverse momenta and for a cross section integrated over transverse momentum. The result is a modified version of the standard W + Y prescription traditionally used in the Collins-Soper-Sterman (CSS) formalism and related approaches. As a result, we further argue that questions regarding the shape and Q- dependence of the cross sections at lower Q are largely governed by the matching to the Y -term.

  15. LTC 1073 vacuum blasting (concrete) human factors assessment -- Baseline (summary)

    SciTech Connect (OSTI)

    1997-07-31

    The LTC 1073 Vacuum Blasting Machine uses a high capacity, direct pressure blasting system incorporating a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast head. A vacuum system removes dust and debris from the surfaces as it is blasted. After cleaning the surface, the abrasive, together with the rust or coating that was removed from the surface, is vacuumed into the machine through the suction hose. The dust separator contains angled steel collision pads, working with the force of gravity, to allow any reusable abrasive to fall back into the pressure vessel. The filters are manually back flushed to prevent clogging. After back flushing, dust is dumped from the dust chamber into the dust collection bag or drum by operation of the bellows valve. The safety and health evaluation during the testing demonstration focused on dust and noise exposure. Dust exposure was found to be minimal, but noise exposure was potentially significant. Further testing for each of these exposures is recommended because the outdoor environment where the testing demonstration took place may cause the results to be inapplicable to indoor settings. It is feasible that the dust and noise levels will be higher in an enclosed operating environment. Other safety and health issues found were ergonomics, heat stress, tripping hazards, lockout/tagout, and arm-hand vibration.

  16. Impact of HFIR LEU Conversion on Beryllium Reflector Degradation Factors

    SciTech Connect (OSTI)

    Ilas, Dan

    2013-10-01

    An assessment of the impact of low enriched uranium (LEU) conversion on the factors that may cause the degradation of the beryllium reflector is performed for the High Flux Isotope Reactor (HFIR). The computational methods, models, and tools, comparisons with previous work, along with the results obtained are documented and discussed in this report. The report documents the results for the gas and neutronic poison production, and the heating in the beryllium reflector for both the highly enriched uranium (HEU) and LEU HFIR configurations, and discusses the impact that the conversion to LEU may have on these quantities. A time-averaging procedure was developed to calculate the isotopic (gas and poisons) production in reflector. The sensitivity of this approach to different approximations is gauged and documented. The results show that the gas is produced in the beryllium reflector at a total rate of 0.304 g/cycle for the HEU configuration; this rate increases by ~12% for the LEU case. The total tritium production rate in reflector is 0.098 g/cycle for the HEU core and approximately 11% higher for the LEU core. A significant increase (up to ~25%) in the neutronic poisons production in the reflector during the operation cycles is observed for the LEU core, compared to the HEU case, for regions close to the core s horizontal midplane. The poisoning level of the reflector may increase by more than two orders of magnitude during long periods of downtime. The heating rate in the reflector is estimated to be approximately 20% lower for the LEU core than for the HEU core. The decrease is due to a significantly lower contribution of the heating produced by the gamma radiation for the LEU core. Both the isotopic (gas and neutronic poisons) production and the heating rates are spatially non-uniform throughout the beryllium reflector volume. The maximum values typically occur in the removable reflector and close to the midplane.

  17. Multifocal Glioblastoma Multiforme: Prognostic Factors and Patterns of Progression

    SciTech Connect (OSTI)

    Showalter, Timothy N.; Andrel, Jocelyn; Andrews, David W.; Curran, Walter J.; Daskalakis, Constantine; Werner-Wasik, Maria

    2007-11-01

    Purpose: To assess the progression patterns in patients with multifocal glioblastoma multiforme who had undergone whole brain radiotherapy (WBRT), the historical standard, versus three-dimensional conformal radiotherapy, and to identify predictive treatment and pretreatment factors. Methods and Materials: The records of 50 patients with multifocal glioblastoma multiforme treated with RT were reviewed. Univariate analyses were performed using survival methods and the Cox proportional hazards regression method. Multivariate analyses were performed using the Cox proportional hazards regression method. Results: The mean age was 61 years, and 71% had a Karnofsky performance status (KPS) score of {>=}70. Of the 50 patients, 32% underwent WBRT and 68%, three-dimensional conformal RT. Progression was local in all evaluable patients, as determined by imaging in 38 patients and early neurologic progression in 12. The median time to progression (TTP) was 3.1 months, and the median survival time (MST) was 8.1 months. The significant independent predictors of TTP on multivariate analysis were a KPS score <70 (p = 0.001), the extent of surgery (p = 0.040), a radiation dose <60 Gy (p = 0.027), and the lack of chemotherapy (p = 0.001). The significant independent predictors of a reduced MST were a KPS score <70 (p = 0.022) and the absence of salvage surgery (p = 0.011) and salvage chemotherapy (p = 0.003). Conclusion: Local progression was observed in all patients. On multivariate analysis, no significant difference was found in the TTP or MST between three-dimensional conformal radiotherapy and WBRT. The KPS was a consistent independent predictor of both TTP and MST. On the basis of the progression pattern, we do not recommend WBRT as a mandatory component of the treatment of multifocal glioblastoma multi0011for.

  18. Human Factors Considerations in New Nuclear Power Plants: Detailed Analysis.

    SciTech Connect (OSTI)

    OHara,J.; Higgins, J.; Brown, W.; Fink, R.

    2008-02-14

    This Nuclear Regulatory Commission (NRC) sponsored study has identified human-performance issues in new and advanced nuclear power plants. To identify the issues, current industry developments and trends were evaluated in the areas of reactor technology, instrumentation and control technology, human-system integration technology, and human factors engineering (HFE) methods and tools. The issues were organized into seven high-level HFE topic areas: Role of Personnel and Automation, Staffing and Training, Normal Operations Management, Disturbance and Emergency Management, Maintenance and Change Management, Plant Design and Construction, and HFE Methods and Tools. The issues where then prioritized into four categories using a 'Phenomena Identification and Ranking Table' methodology based on evaluations provided by 14 independent subject matter experts. The subject matter experts were knowledgeable in a variety of disciplines. Vendors, utilities, research organizations and regulators all participated. Twenty issues were categorized into the top priority category. This Brookhaven National Laboratory (BNL) technical report provides the detailed methodology, issue analysis, and results. A summary of the results of this study can be found in NUREG/CR-6947. The research performed for this project has identified a large number of human-performance issues for new control stations and new nuclear power plant designs. The information gathered in this project can serve as input to the development of a long-term strategy and plan for addressing human performance in these areas through regulatory research. Addressing human-performance issues will provide the technical basis from which regulatory review guidance can be developed to meet these challenges. The availability of this review guidance will help set clear expectations for how the NRC staff will evaluate new designs, reduce regulatory uncertainty, and provide a well-defined path to new nuclear power plant licensing.

  19. Experimental analysis of elemental factors controlling the life of PAFCs

    SciTech Connect (OSTI)

    Watanabe, Masahiro; Miyoshi, Hideaki; Uchida, Hiroyuki

    1996-12-31

    Since 1991, 5MW-class and 1MW-class PAFC power plants have been demonstrated with the objective of accelerating development and commercialization by the Phosphoric Acid Fuel Cell Technology Research Association (PAFC-TRA) jointly with NEDO as one of MITI`s fuel cell programs. As a complimentary research project to the demonstration project, the mechanism and rate of deterioration of the cells and stacks have been studied from 1995 FY, with the objective of establishing an estimation method for the service life-time of the cell stacks. Our work has been performed in the Basic Research Project, as part of that project on PAFCs, with the cooperation of Yamanashi University supported by the Ministry of Education, Science and Culture, PAFC-TRA supported by NEDO and three PAFC makers. We have selected the following four subjects as the essential factors relating to the life-time, after a year-long study of the literature and the accumulation of a large number of data as to the practical operations of the cells, cell stacks and plants of PAFCs; i.e., (1) Mechanism of the degradation of electrocatalysts and the effect of the degradation on the electrode performances. (2) Effect of the electrolyte fill-level on the electrode performances. (3) Corrosion of cell constructing materials and the effect of the corrosion on the electrode performances. (4) The rate and mechanism of electrolyte loss under various operating conditions of a model cell. The paper briefly introduces the interim results which have been found on the above subjects at this time.

  20. Applying Human Factors during the SIS Life Cycle

    SciTech Connect (OSTI)

    Avery, K.

    2010-05-05

    Safety Instrumented Systems (SIS) are widely used in U.S. Department of Energy's (DOE) nonreactor nuclear facilities for safety-critical applications. Although use of the SIS technology and computer-based digital controls, can improve performance and safety, it potentially introduces additional complexities, such as failure modes that are not readily detectable. Either automated actions or manual (operator) actions may be required to complete the safety instrumented function to place the process in a safe state or mitigate a hazard in response to an alarm or indication. DOE will issue a new standard, Application of Safety Instrumented Systems Used at DOE Nonreactor Nuclear Facilities, to provide guidance for the design, procurement, installation, testing, maintenance, operation, and quality assurance of SIS used in safety significant functions at DOE nonreactor nuclear facilities. The DOE standard focuses on utilizing the process industry consensus standard, American National Standards Institute/ International Society of Automation (ANSI/ISA) 84.00.01, Functional Safety: Safety Instrumented Systems for the Process Industry Sector, to support reliable SIS design throughout the DOE complex. SIS design must take into account human-machine interfaces and their limitations and follow good human factors engineering (HFE) practices. HFE encompasses many diverse areas (e.g., information display, user-system interaction, alarm management, operator response, control room design, and system maintainability), which affect all aspects of system development and modification. This paper presents how the HFE processes and principles apply throughout the SIS life cycle to support the design and use of SIS at DOE nonreactor nuclear facilities.

  1. Economic Conditions and Factors Affecting New Nuclear Power Deployment

    SciTech Connect (OSTI)

    Harrison, Thomas J.

    2014-10-01

    This report documents work performed in support of the US Department of Energy Office of Nuclear Energy’s Advanced Small Modular Reactor (AdvSMR) program. The report presents information and results from economic analyses to describe current electricity market conditions and those key factors that may impact the deployment of AdvSMRs or any other new nuclear power plants. Thus, this report serves as a reference document for DOE as it moves forward with its plans to develop advanced reactors, including AdvSMRs. For the purpose of this analysis, information on electricity markets and nuclear power plant operating costs will be combined to examine the current state of the nuclear industry and the process required to successfully move forward with new nuclear power in general and AdvSMRs in particular. The current electricity market is generally unfavorable to new nuclear construction, especially in deregulated markets with heavy competition from natural gas and subsidized renewables. The successful and profitable operation of a nuclear power plant (or any power plant) requires the rate at which the electricity is sold to be sufficiently greater than the cost to operate. The wholesale rates in most US markets have settled into values that provide profits for most operating nuclear power plants but are too low to support the added cost of capital recovery for new nuclear construction. There is a strong geographic dependence on the wholesale rate, with some markets currently able to support new nuclear construction. However, there is also a strong geographic dependence on pronuclear public opinion; the areas where power prices are high tend to have unfavorable views on the construction of new nuclear power plants. The use of government-backed incentives, such as subsidies, can help provide a margin to help justify construction projects that otherwise may not seem viable. Similarly, low interest rates for the project will also add a positive margin to the economic

  2. Bone morphogenetic protein-4 strongly potentiates growth factor-induced proliferation of mammary epithelial cells

    SciTech Connect (OSTI)

    Montesano, Roberto Sarkoezi, Rita; Schramek, Herbert

    2008-09-12

    Bone morphogenetic proteins (BMPs) are multifunctional cytokines that elicit pleiotropic effects on biological processes such as cell proliferation, cell differentiation and tissue morphogenesis. With respect to cell proliferation, BMPs can exert either mitogenic or anti-mitogenic activities, depending on the target cells and their context. Here, we report that in low-density cultures of immortalized mammary epithelial cells, BMP-4 did not stimulate cell proliferation by itself. However, when added in combination with suboptimal concentrations of fibroblast growth factor (FGF)-2, FGF-7, FGF-10, epidermal growth factor (EGF) or hepatocyte growth factor (HGF), BMP-4 potently enhanced growth factor-induced cell proliferation. These results reveal a hitherto unsuspected interplay between BMP-4 and growth factors in the regulation of mammary epithelial cell proliferation. We suggest that the ability of BMP-4 to potentiate the mitogenic activity of multiple growth factors may contribute to mammary gland ductal morphogenesis as well as to breast cancer progression.

  3. Relative importance of multiple factors on terrestrial loading of DOC to Arctic river networks

    SciTech Connect (OSTI)

    Kicklighter, David W.; Hayes, Daniel J; Mcclelland, James W; Peterson, Bruce; Mcguire, David; Melillo, Jerry

    2014-01-01

    Terrestrial carbon dynamics influence the contribution of dissolved organic carbon (DOC) to river networks in addition to controlling carbon fluxes between the land surface and the atmosphere. In this study, we use a biogeochemical process model to simulate the lateral transfer of DOC from land to the Arctic Ocean via riverine transport. We estimate that the pan-arctic watershed has contributed, on average, 32 Tg C/yr of DOC to the Arctic Ocean over the 20th century with most coming from the extensive area of boreal deciduous needle-leaved forests and forested wetlands in Eurasian watersheds. We also estimate that the rate of terrestrial DOC loading has been increasing by 0.037 Tg C/yr2 over the 20th century primarily as a result of increases in air temperatures and precipitation. These increases have been partially compensated by decreases in terrestrial DOC loading caused by wildfires. Other environmental factors (CO2 fertilization, ozone pollution, atmospheric nitrogen deposition, timber harvest, agriculture) are estimated to have relatively small effects on terrestrial DOC loading to arctic rivers. The effects of the various environmental factors on terrestrial carbon dynamics have both compensated and enhanced concurrent effects on hydrology to influence terrestrial DOC loading. Future increases in riverine DOC concentrations and export may occur from warming-induced increases in terrestrial DOC production associated with enhanced microbial metabolism and the exposure of additional organic matter from permafrost degradation along with decreases in water yield associated with warming-induced increases in evapotranspiration. Improvements in simulating terrestrial DOC loading to pan-arctic rivers in the future will require better information on the spatial distribution of precipitation and its temporal trends, carbon dynamics of larch-dominated ecosystems in eastern Siberia, and the role of industrial organic effluents on carbon budgets of rivers in western

  4. Using Two-Factor RSA Token with WebVPN | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using Two-Factor RSA Token with WebVPN Using Two-Factor RSA Token with WebVPN Your RSA token is used to esbablish a connection to the Internet and connect to https://connect.doe.gov . Using-TwoFactorRSA-Token w VPN.pdf (469 KB) More Documents & Publications Instructions for WebVPN Connectivity Citrix_2FA_Authentication_09.09 Microsoft Word - Citrix_2FA_Authentication_12_3_2009.doc

  5. An Effective Method to Accurately Calculate the Phase Space Factors for β - β - Decay

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Neacsu, Andrei; Horoi, Mihai

    2016-01-01

    Accurate calculations of the electron phase space factors are necessary for reliable predictions of double-beta decay rates and for the analysis of the associated electron angular and energy distributions. We present an effective method to calculate these phase space factors that takes into account the distorted Coulomb field of the daughter nucleus, yet it allows one to easily calculate the phase space factors with good accuracy relative to the most exact methods available in the recent literature.

  6. Closer to HIV vaccine goal with new insight into viral factors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Closer to HIV vaccine goal with new insight into viral factors New insight into viral factors that facilitate HIV transmission Understanding viral factors that facilitate transmission of HIV infection is critical to developing vaccines. February 14, 2012 Scientists work at the National Stable Isotope Resource LANL scientists found that the infected donor's predominant virus subpopulation in the genital tract differed from that in the blood. Comparing the HIV sequence population in each newly

  7. Risk Factors Associated With Secondary Sarcomas in Childhood Cancer Survivors: A Report From the Childhood Cancer Survivor Study

    SciTech Connect (OSTI)

    Henderson, Tara O.; Rajaraman, Preetha; Stovall, Marilyn; Constine, Louis S.; Olive, Aliza; Smith, Susan A.; Mertens, Ann; Meadows, Anna; Neglia, Joseph P.; Hammond, Sue; Whitton, John; Inskip, Peter D.; Robison, Leslie L.; Diller, Lisa

    2012-09-01

    Purpose: Childhood cancer survivors have an increased risk of secondary sarcomas. To better identify those at risk, the relationship between therapeutic dose of chemotherapy and radiation and secondary sarcoma should be quantified. Methods and Materials: We conducted a nested case-control study of secondary sarcomas (105 cases, 422 matched controls) in a cohort of 14,372 childhood cancer survivors. Radiation dose at the second malignant neoplasm (SMN) site and use of chemotherapy were estimated from detailed review of medical records. Odds ratios (ORs) and 95% confidence intervals were estimated by conditional logistic regression. Excess odds ratio (EOR) was modeled as a function of radiation dose, chemotherapy, and host factors. Results: Sarcomas occurred a median of 11.8 years (range, 5.3-31.3 years) from original diagnosis. Any exposure to radiation was associated with increased risk of secondary sarcoma (OR = 4.1, 95% CI = 1.8-9.5). A dose-response relation was observed, with elevated risks at doses between 10 and 29.9 Gy (OR = 15.6, 95% CI = 4.5-53.9), 30-49.9 Gy (OR = 16.0, 95% CI 3.8-67.8) and >50 Gy (OR = 114.1, 95% CI 13.5-964.8). Anthracycline exposure was associated with sarcoma risk (OR = 3.5, 95% CI = 1.6-7.7) adjusting for radiation dose, other chemotherapy, and primary cancer. Adjusting for treatment, survivors with a first diagnosis of Hodgkin lymphoma (OR = 10.7, 95% CI = 3.1-37.4) or primary sarcoma (OR = 8.4, 95% CI = 3.2-22.3) were more likely to develop a sarcoma. Conclusions: Of the risk factors evaluated, radiation exposure was the most important for secondary sarcoma development in childhood cancer survivors; anthracycline chemotherapy exposure was also associated with increased risk.

  8. Landslide hazard mapping with selected dominant factors: A study case of Penang Island, Malaysia

    SciTech Connect (OSTI)

    Tay, Lea Tien; Alkhasawneh, Mutasem Sh.; Ngah, Umi Kalthum; Lateh, Habibah

    2015-05-15

    Landslide is one of the destructive natural geohazards in Malaysia. In addition to rainfall as triggering factos for landslide in Malaysia, topographical and geological factors play important role in the landslide susceptibility analysis. Conventional topographic factors such as elevation, slope angle, slope aspect, plan curvature and profile curvature have been considered as landslide causative factors in many research works. However, other topographic factors such as diagonal length, surface area, surface roughness and rugosity have not been considered, especially for the research work in landslide hazard analysis in Malaysia. This paper presents landslide hazard mapping using Frequency Ratio (FR) and the study area is Penang Island of Malaysia. Frequency ratio approach is a variant of probabilistic method that is based on the observed relationships between the distribution of landslides and each landslide-causative factor. Landslide hazard map of Penang Island is produced by considering twenty-two (22) landslide causative factors. Among these twenty-two (22) factors, fourteen (14) factors are topographic factors. They are elevation, slope gradient, slope aspect, plan curvature, profile curvature, general curvature, tangential curvature, longitudinal curvature, cross section curvature, total curvature, diagonal length, surface area, surface roughness and rugosity. These topographic factors are extracted from the digital elevation model of Penang Island. The other eight (8) non-topographic factors considered are land cover, vegetation cover, distance from road, distance from stream, distance from fault line, geology, soil texture and rainfall precipitation. After considering all twenty-two factors for landslide hazard mapping, the analysis is repeated with fourteen dominant factors which are selected from the twenty-two factors. Landslide hazard map was segregated into four categories of risks, i.e. Highly hazardous area, Hazardous area, Moderately hazardous area

  9. Influence of graphene on quality factor variation in a silicon ring resonator

    SciTech Connect (OSTI)

    Kou, Rai; Tanabe, Shinichi; Hibino, Hiroki; Tsuchizawa, Tai; Yamada, Koji; Yamamoto, Tsuyoshi; Nakajima, Hirochika

    2014-03-03

    Selectively patterned graphene is integrated onto a silicon ring resonator to investigate the quality factor (Q factor) variation. The Q factor sharply decreases from 7900 to 1200 as the patterned graphene length increases from 0 to 20??m. A numerical estimation, which takes into account optical absorption by graphene, shows an exponential damping of the Q factor with increasing graphene length and is consistent with the experimental result. We expect these fundamental characterizations to be helpful in developing graphene-integrated silicon photonics applications.

  10. SciFri AM: Mountain 01: Validation of a new formulism and the related correction factors on output factor determination for small photon fields

    SciTech Connect (OSTI)

    Wang, Yizhen; Younge, Kelly; Nielsen, Michelle; Mutanga, Theodore; Cui, Congwu; Das, Indra J.

    2014-08-15

    Small field dosimetry measurements including output factors are difficult due to lack of charged-particle equilibrium, occlusion of the radiation source, the finite size of detectors, and non-water equivalence of detector components. With available detectors significant variations could be measured that will lead to incorrect delivered dose to patients. IAEA/AAPM have provided a framework and formulation to correct the detector response in small photon fields. Monte Carlo derived correction factors for some commonly used small field detectors are now available, however validation has not been performed prior to this study. An Exradin A16 chamber, EDGE detector and SFD detector were used to perform the output factor measurement for a series of conical fields (530mm) on a Varian iX linear accelerator. Discrepancies up to 20%, 10% and 6% were observed for 5, 7.5 and 10 mm cones between the initial output factors measured by the EDGE detector and the A16 ion chamber, while the discrepancies for the conical fields larger than 10 mm were less than 4%. After the application of the correction, the output factors agree well with each other to within 1%. Caution is needed when determining the output factors for small photon fields, especially for fields 10 mm in diameter or smaller. More than one type of detector should be used, each with proper corrections applied to the measurement results. It is concluded that with the application of correction factors to appropriately chosen detectors, output can be measured accurately for small fields.

  11. Uniform surface growth of copper oxide nanowires in radiofrequency plasma discharge and limiting factors

    SciTech Connect (OSTI)

    Filipič, Gregor; Mozetič, Miran; Cvelbar, Uroš; Baranov, Oleg; Ostrikov, Kostya

    2014-11-15

    The uniform growth of copper oxide nanowires on the top of copper plate has been investigated during the exposure to radiofrequency plasma discharge in respect to plasma properties and its localization. The copper samples of 10 mm radius and 1 mm in thickness were exposed to argon-oxygen plasma created at discharge power of 150 W. After 10 min, almost uniform growth of nanowires was achieved over large surface. There were significant distortions in nanowire length and shape near the edges. Based on the experimental results, we developed a theoretical model, which took into account a balance in heat released at the flow of the current to the nanowire and rejected from the nanowire. This model established a dependence of the maximal length of the nanowire at dependence on the plasma parameters, where the limiting factor for nanowire growth and distortions in distribution are ballistic effects of ions and their local fluxes. In contrast, the plasma heating by potential interactions of species has very little influence on the length and smaller deviations in flux are allowed for uniformity of growth.

  12. Development of adjustment factors for the EPA city and highway MPG values

    SciTech Connect (OSTI)

    Hellman, K.H.; Murrell, J.D.

    1984-01-01

    This paper describes the development of adjustment factors applicable to the EPA City and Highway MPG values. The paper discusses the data bases used, and the analytical methods employed to arrive at adjustment factors of 0.90 for the EPA City MPG value and 0.78 for the EPA Highway MPG value.

  13. Consideration of factors affecting strip effluent pH and sodium content

    SciTech Connect (OSTI)

    Peters, T. B.

    2015-07-29

    A number of factors were investigated to determine possible reasons for why the Strip Effluent (SE) can sometimes have higher than expected pH values and/or sodium content, both of which have prescribed limits. All of the factors likely have some impact on the pH values and Na content.

  14. The effect of the windmill`s parameters on the capacity factor

    SciTech Connect (OSTI)

    Salameh, Z.M.; Safari, I.

    1995-12-01

    In this paper a methodology to study the effect of the windmill`s parameters on the capacity factor is presented. The study is based on finding the capacity factors (CF) of the identically rated available windmills. This is done by using long term wind speed data recorded at different hours of the day for many years. This data is then used to generate mean wind speeds for a typical day in a month. Probability density functions for the mean wind speeds for the different hours of the day are generated and used to calculate the capacity factors for the windmills taking into account the manufacturer`s parameters of the windmills. The study shows that although the windmills have the same rating they have different capacity factors. The windmill with the highest average capacity factor for the specific site is to be recommended.

  15. Source Apportionment of Stack Emissions from Research and Development Facilities Using Positive Matrix Factorization

    SciTech Connect (OSTI)

    Ballinger, Marcel Y.; Larson, Timothy V.

    2014-08-19

    Emissions from research and development (R&D) facilities are difficult to characterize due to the wide variety of processes used, changing nature of research, and large number of chemicals. Positive matrix factorization (PMF) was applied to volatile organic compounds (VOCs) concentrations measured in the main exhaust stacks of four different R&D buildings to identify the number and composition of major contributing sources. PMF identified from 9-11 source-related factors contributing to the stack emissions depending on the building. The factors that were similar between buildings were major contributors to trichloroethylene (TCE), acetone, and ethanol emissions. Several other factors had similar profiles for two or more buildings but not for all four. One factor for each building was a combination of p/m-xylene, o-xylene and ethylbenzene. At least one factor for each building was identified that contained a broad mix of many species and constraints were used in PMF to modify the factors to resemble more closely the off-shift concentration profiles. PMF accepted the constraints with little decrease in model fit. Although the PMF model predicted the profiles of the off-shift samples, the percent of total emissions was under-predicted by the model versus the measured data.

  16. g-factor anisotropy in nanowire-based InAs quantum dots

    SciTech Connect (OSTI)

    D'Hollosy, Samuel; Fábián, Gábor; Baumgartner, Andreas; Schönenberger, Christian; Nygård, Jesper

    2013-12-04

    The determination and control of the electron g-factor in semiconductor quantum dots (QDs) are fundamental prerequisites in modern concepts of spintronics and spin-based quantum computation. We study the dependence of the g-factor on the orientation of an external magnetic field in quantum dots (QDs) formed between two metallic contacts on stacking fault free InAs nanowires. We extract the g-factor from the splitting of Kondo resonances and find that it varies continuously in the range between |g*| = 5 and 15.

  17. Electromagnetic form factors of the Delta in a S-wave approach

    SciTech Connect (OSTI)

    Ramalho, Gilberto; Pena, M.T.

    2009-01-01

    Without any further adjusting of parameters, a relativistic constituent quark model, successful in the description of the data for the nucleon elastic form factors and the dominant contribution to the nucleon to Delta electromagnetic transition, is used here to predict the dominant electromagnetic form factors of the Delta baryon. The model considered is based on a simple Delta wave function corresponding to a quark-diquark system in an S-state. The results for E0 and M1 are consistent both with experimental results and lattice calculations. The remaining form factors M3 and E2 vanishes, given the symmetric structure considered for the Delta.

  18. The human factors of quality and QA in R D environments

    SciTech Connect (OSTI)

    Hill, S.G.

    1990-01-01

    Achieving quality is a human activity. It is therefore important to consider the human in the design, development and evaluation of work processes and environments in an effort to enhance human performance and minimize error. It is also important to allow for individual differences when considering human factors issues. Human Factors is the field of study which can provide information on integrating the human into the system. Human factors and quality are related for the customer of R D work, R D personnel who perform the work, and the quality professional who overviews the process of quality in the work. 18 refs., 1 fig.

  19. Delta and Omega electromagnetic form factors in a Dyson-Schwinger/Bethe-Salpeter approach

    SciTech Connect (OSTI)

    Diana Nicmorus, Gernot Eichmann, Reinhard Alkofer

    2010-12-01

    We investigate the electromagnetic form factors of the Delta and the Omega baryons within the Poincare-covariant framework of Dyson-Schwinger and Bethe-Salpeter equations. The three-quark core contributions of the form factors are evaluated by employing a quark-diquark approximation. We use a consistent setup for the quark-gluon dressing, the quark-quark bound-state kernel and the quark-photon interaction. Our predictions for the multipole form factors are compatible with available experimental data and quark-model estimates. The current-quark mass evolution of the static electromagnetic properties agrees with results provided by lattice calculations.

  20. Expansion of X-ray form factor for close shell using uncorrelated wave function

    SciTech Connect (OSTI)

    AL-Robayi, Enas M.

    2013-12-16

    The atomic scattering factor has been studied for Be+ve, and B+2ve ions using the uncorrelated wave function (Hartree-Fock (HF)) for inter particle electronic shells. The physical importance of this factor appears in its relation to several important atomic properties as, the coherent scattering intensity, the total scattering intensity, the incoherent scattering function, the coherent scattering cross section, the total incoherent cross section, the nuclear magnetic shielding constant, the geometrical structure factor. Also there is one atomic properties the one particle radial density distribution function D(r)has been studied using the partitioning technique.

  1. Spatial correction factors for YALINA Booster facility loaded with medium and low enriched fuels

    SciTech Connect (OSTI)

    Talamo, A.; Gohar, Y. [Argonne National Laboratory, 9700 S. Cass Ave, Argonne, IL 60439 (United States); Bournos, V.; Fokov, Y.; Kiyavitskaya, H.; Routkovskaya, C. [Joint Inst. for Power and Nuclear Research-Sosny, 99 Academician A.K.Krasin Str, Minsk 220109 (Belarus)

    2012-07-01

    The Bell and Glasstone spatial correction factor is used in analyses of subcritical assemblies to correct the experimental reactivity as function of the detector position. Besides the detector position, several other parameters affect the correction factor: the energy weighting function of the detector, the detector size, the energy-angle distribution of source neutrons, and the reactivity of the subcritical assembly. This work focuses on the dependency of the correction factor on the detector material and it investigates the YALINA Booster subcritical assembly loaded with medium (36%) and low (10%) enriched fuels. (authors)

  2. Black Carbon Concentrations and Diesel Vehicle Emission FactorsDerived from Coefficient of Haze Measurements in California:1967-2003

    SciTech Connect (OSTI)

    Kirchstetter, Thomas W.; Aguiar, Jeffery; Tonse, Shaheen; Novakov, T.

    2007-10-01

    We have derived ambient black carbon (BC) concentrations and estimated emission factors for on-road diesel vehicles from archived Coefficient of Haze (COH) data that was routinely collected beginning in 1967 at 11 locations in the San Francisco Bay Area. COH values are a measure of the attenuation of light by particles collected on a white filter, and available data indicate they are proportional to BC concentrations measured using the conventional aethalometer. Monthly averaged BC concentrations are up to five times greater in winter than summer, and, consequently, so is the population's exposure to BC. The seasonal cycle in BC concentrations is similar for all Bay Area sites, most likely due to area-wide decreased pollutant dispersion during wintertime. A strong weekly cycle is also evident, with weekend concentrations significantly lower than weekday concentrations, consistent with decreased diesel traffic volume on weekends. The weekly cycle suggests that, in the Bay Area, diesel vehicle emissions are the dominant source of BC aerosol. Despite the continuous increase in diesel fuel consumption in California, annual Bay Area average BC concentrations decreased by a factor of {approx}3 from the late 1960s to the early 2000s. Based on estimated annual BC concentrations, on-road diesel fuel consumption, and recent measurements of on-road diesel vehicle BC emissions, diesel BC emission factors decreased by an order of magnitude over the study period. Reductions in the BC emission factor reflect improved engine technology, emission controls and changes in diesel fuel composition. A new BC monitoring network is needed to continue tracking ambient BC trends because the network of COH monitors has recently been retired.

  3. Black Carbon Concentrations and Diesel Vehicle Emission Factors Derived from Coefficient of Haze Measurements in California: 1967-2003

    SciTech Connect (OSTI)

    Tast, CynthiaL; Kirchstetter, Thomas W.; Aguiar, Jeffery; Tonse, Shaheen; Novakov, T.; Fairley, David

    2007-11-09

    We have derived ambient black carbon (BC) concentrations and estimated emission factors for on-road diesel vehicles from archived Coefficient of Haze (COH) data that was routinely collected beginning in 1967 at 11 locations in the San Francisco Bay Area. COH values are a measure of the attenuation of light by particles collected on a white filter, and available data indicate they are proportional to BC concentrations measured using the conventional aethalometer. Monthly averaged BC concentrations are up to five times greater in winter than summer, and, consequently, so is the population?s exposure to BC. The seasonal cycle in BC concentrations is similar for all Bay Area sites, most likely due to area-wide decreased pollutant dispersion during wintertime. A strong weekly cycle is also evident, with weekend concentrations significantly lower than weekday concentrations, consistent with decreased diesel traffic volume on weekends. The weekly cycle suggests that, in the Bay Area, diesel vehicle emissions are the dominant source of BC aerosol. Despite the continuous increase in diesel fuel consumption in California, annual Bay Area average BC concentrations decreased by a factor of ~;;3 from the late 1960s to the early 2000s. Based on estimated annual BC concentrations, on-road diesel fuel consumption, and recent measurements of on-road diesel vehicle BC emissions, diesel BC emission factors decreased by an order of magnitude over the study period. Reductions in the BC emission factor reflect improved engine technology, emission controls and changes in diesel fuel composition. A new BC monitoring network is needed to continue tracking ambient BC trends because the network of COH monitors has recently been retired.

  4. Cavity loss factors of non-relativistic beams for Project X

    SciTech Connect (OSTI)

    Lunin, A.; Yakovlev, V.; Kazakov, S.; /Fermilab

    2011-03-01

    Cavity loss factor calculation is an important part of the total cryolosses estimation for the super conductive (SC) accelerating structures. There are two approaches how to calculate cavity loss factors, the integration of a wake potential over the bunch profile and the addition of loss factors for individual cavity modes. We applied both methods in order to get reliable results for non-relativistic beam. The time domain CST solver was used for a wake potential calculation and the frequency domain HFSS code was used for the cavity eigenmodes spectrum findings. Finally we present the results of cavity loss factors simulations for a non-relativistic part of the ProjectX and analyze it for various beam parameters.

  5. Electromagnetic form factors of the nucleon: New fit and analysis of uncertainties

    SciTech Connect (OSTI)

    Alberico, W. M.; Giunti, C.; Bilenky, S. M.; Graczyk, K. M.

    2009-06-15

    Electromagnetic form factors of proton and neutron, obtained from a new fit of data, are presented. The proton form factors are obtained from a simultaneous fit to the ratio {mu}{sub p}G{sub Ep}/G{sub Mp} determined from polarization transfer measurements and to ep elastic cross section data. Phenomenological two-photon exchange corrections are taken into account. The present fit for protons was performed in the kinematical region Q{sup 2} is an element of (0,6) GeV{sup 2}. For both protons and neutrons we use the latest available data. For all form factors, the uncertainties and correlations of form factor parameters are investigated with the {chi}{sup 2} method.

  6. Large theoretical thermoelectric power factor of suspended single-layer MoS{sub 2}

    SciTech Connect (OSTI)

    Babaei, Hasan E-mail: babaei@auburn.edu; Khodadadi, J. M.; Sinha, Sanjiv

    2014-11-10

    We have calculated the semi-classical thermoelectric power factor of suspended single-layer (SL)- MoS{sub 2} utilizing electron relaxation times derived from ab initio calculations. Measurements of the thermoelectric power factor of SL-MoS{sub 2} on substrates reveal poor power factors. In contrast, we find the thermoelectric power factor of suspended SL-MoS{sub 2} to peak at ∼2.8 × 10{sup 4} μW/m K{sup 2} at 300 K, at an electron concentration of 10{sup 12} cm{sup −2}. This figure is higher than that in bulk Bi{sub 2}Te{sub 3}, for example. Given its relatively high thermal conductivity, suspended SL-MoS{sub 2} may hold promise for in-plane thin-film Peltier coolers, provided reasonable mobilities can be realized.

  7. On-line method of determining utilization factor in Hg-196 photochemical separation process

    DOE Patents [OSTI]

    Grossman, Mark W.; Moskowitz, Philip E.

    1992-01-01

    The present invention is directed to a method for determining the utilization factor [U] in a photochemical mercury enrichment process (.sup.196 Hg) by measuring relative .sup.196 Hg densities using absorption spectroscopy.

  8. Dispersive representation and shape of the K{sub l3} form factors: Robustness

    SciTech Connect (OSTI)

    Bernard, Veronique; Stern, Jan; Passemar, Emilie

    2009-08-01

    An accurate low-energy dispersive parametrization of the scalar K{pi} form factor was constructed some time ago in terms of a single parameter guided by the Callan-Treiman low-energy theorem. A similar twice-subtracted dispersive parametrization for the vector K{pi} form factor will be investigated here. The robustness of the parametrization of these two form factors will be studied in great detail. In particular the cutoff dependence, the isospin breaking effects, and the possible, though not highly probable, presence of zeros in the form factors will be discussed. Interesting constraints in the latter case will be obtained from the soft-kaon analog of the Callan-Treiman theorem and a comparison with the recent {tau}{yields}K{pi}{nu}{sub {tau}} data.

  9. g factor of the 2{sub 1}{sup +} state of {sup 172}Hf

    SciTech Connect (OSTI)

    Berant, Z.; Wolf, A.; Oster, E.; Casperson, R. J.; Werner, V.; Heinz, A.; Casten, R. F.; Terry, J. R.; Winkler, R.; Williams, E.; Qian, J.; Schmidt, A.; Smith, M. K.; Ahn, T.; Gurdal, G.; McCutchan, E. A.; Brenner, D. S.; Beausang, C. W.; Regan, P. H.; Ross, T.

    2009-11-15

    The g factor of the 2{sub 1}{sup +} state of {sup 172}Hf was measured using the perturbed angular correlation technique in a static external magnetic field. The result, g(2{sub 1}{sup +})=0.25(5), is discussed in relation to the systematics of the previously reported g factors in the Hf isotopes and compared with the predictions of several models. An interesting outcome of the analysis presented in this paper is the agreement between the calculated g factors within the interacting boson approximation (IBA) and the results of a large-scale shell model calculation. This agreement supports the emphasis in the IBA on the valence space. The undershooting of the empirical g factors near midshell in both models suggests that they underestimate the role of the saturation of collectivity, which is explicitly incorporated into a phenomenological model that agrees better with the data.

  10. g-factor of the 2{sup+}{sub{1} state of {sup179}Hf.

    SciTech Connect (OSTI)

    Berant, Z.; Oster, E.; Wolf, A.; Casperson, R. J.; Werner, V.; McCutchan, E. A.

    2009-01-01

    The g factor of the 2{sub 1}{sup +} state of {sup 172}Hf was measured using the perturbed angular correlation technique in a static external magnetic field. The result, g(2{sub 1}{sup +}) = 0.25(5), is discussed in relation to the systematics of the previously reported g factors in the Hf isotopes and compared with the predictions of several models. An interesting outcome of the analysis presented in this paper is the agreement between the calculated g factors within the interacting boson approximation (IBA) and the results of a large-scale shell model calculation. This agreement supports the emphasis in the IBA on the valence space. The undershooting of the empirical g factors near midshell in both models suggests that they underestimate the role of the saturation of collectivity, which is explicitly incorporated into a phenomenological model that agrees better with the data.