National Library of Energy BETA

Sample records for factor incandescent standard

  1. High efficiency incandescent lighting

    DOE Patents [OSTI]

    Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

    2014-09-02

    Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

  2. 2014-04-11 Issuance: Energy Conservation Standards for General Service Fluorescent Lamps and Incandescent Reflector Lamps; Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of proposed rulemaking regarding energy conservation standards for general service fluorescent lamps and incandescent reflectors lamps, as issued by the Assistant Secretary for Energy Efficiency and Renewable Energy on April 11, 2014.

  3. Dual LED/incandescent security fixture

    DOE Patents [OSTI]

    Gauna, Kevin Wayne

    2005-06-21

    A dual LED and incandescent security lighting system uses a hybrid approach to LED illumination. It combines an ambient LED illuminator with a standard incandescent lamp on a motion control sensor. The LED illuminator will activate with the onset of darkness (daylight control) and typically remain on during the course of the night ("always on"). The LED illumination, typically amber, is sufficient to provide low to moderate level lighting coverage to the wall and ground area adjacent to and under the fixture. The incandescent lamp is integrated with a motion control circuit and sensor. When movement in the field of view is detected (after darkness), the incandescent lamp is switched on, providing an increased level of illumination to the area. Instead of an "always on" LED illuminator, the LEDs may also be switched off when the incandescent lamp is switched on.

  4. Incandescent Lighting | Department of Energy

    Office of Environmental Management (EM)

    courtesy of iStockphotoTokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings....

  5. How Energy-Efficient Light Bulbs Compare with Traditional Incandescent...

    Office of Environmental Management (EM)

    Energy-Efficient Light Bulbs Compare with Traditional Incandescents How Energy-Efficient Light Bulbs Compare with Traditional Incandescents November 5, 2014 - 11:39pm Addthis By...

  6. How Energy-Efficient Light Bulbs Compare with Traditional Incandescent...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    you can save 75 each year. Compared to traditional incandescents, energy-efficient lightbulbs such as halogen incandescents, compact fluorescent lamps (CFLs), and light emitting...

  7. ,,,"Incandescent","Standard Fluorescent","Compact Fluorescent","High-Intensity Discharge","Halogen"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: AlternativeMonthly","10/2015"Monthly","10/2015" ,"Release7 Relative Standard Errors for Table 5.7;" " Unit:8977.8.38.

  8. ,,,"Incandescent","Standard Fluorescent","Compact Fluorescent","High-Intensity Discharge","Halogen"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: AlternativeMonthly","10/2015"Monthly","10/2015" ,"Release7 Relative Standard Errors for Table 5.7;" "

  9. How Energy-Efficient Light Bulbs Compare with Traditional Incandescent...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    used light fixtures or bulbs with models that have earned the ENERGY STAR, you can save 75 each year. Compared to traditional incandescents, energy-efficient lightbulbs...

  10. ECE 466: LED Lighting Systems -Incandescent lightings rise and

    E-Print Network [OSTI]

    Connors, Daniel A.

    ECE 466: LED Lighting Systems - Incandescent lightings rise and demise via government policy - Alternative Fluorescent light sources and compact fluorescent lights (CFL) to incandescents - Alternative LED light sources - Color index as well as Watts to Lumens efficiency available from all three light sources

  11. New Lighting Standards Began in 2012 | Department of Energy

    Office of Environmental Management (EM)

    save you about 50 per year when you replace 15 traditional incandescent bulbs in your home. Measuring Light in Lumens The new efficiency standards require lightbulbs to consume...

  12. A Bright Idea: New Efficiency Standards for Incandescent and Fluorescent

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing ToolInternationalReportOffice | DepartmentVery1, in: Statement of Dr.26Former|A

  13. CALiPER Benchmark Report: Performance of Incandescent A Type and Decorative Lamps and LED Replacements

    SciTech Connect (OSTI)

    None

    2008-11-01

    This benchmark report addresses common omnidirectional incandescent lamps - A-type and small decorative, candelabra-type lamps - and their commercially available light-emitting diode (LED) replacements.

  14. Industrial Application of Human Factors Safety Standards ISBN 978-82-471-2251-8 (Electronic)

    E-Print Network [OSTI]

    Langseth, Helge

    Industrial Application of Human Factors Safety Standards #12;ISBN 978-82-471-2251-8 (Electronic The main objective of this thesis is to investigate how selected standards are applied within an industrial. A survey of selected HSE standards used in the Norwegian petroleum industry revealed that the standards

  15. Potential Environmental Impacts from the Metals in Incandescent, Compact Fluorescent Lamp (CFL), and Light-Emitting Diode (LED)

    E-Print Network [OSTI]

    Short, Daniel

    Potential Environmental Impacts from the Metals in Incandescent, Compact Fluorescent Lamp (CFL, previous studies have investigated various environmental impacts from incandescent, CFL, and LED bulbs. There is uncertainty about the potential environmental impacts of these components and whether special provisions must

  16. APPLIANCE STANDARDS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Equipment General Service Incandescent Lamps General Service Fluorescent Lamps Small Electric Motors Electric Motors Water Heaters Furnace Fans Distribution Transformers Water...

  17. >.........standard

    E-Print Network [OSTI]

    to the multimedia research and product development industry Planned Accomplishments MPEG Standards: ·Establishing 2D. ......... IETF standard protocols Collaborators / Customers Standards Groups: MPEG, SMPTE NIST Collaborators: ATP Other Collaborators: Academic

  18. Soot particle sizing during high-pressure Diesel spray combustion via time-resolved laser-induced incandescence

    SciTech Connect (OSTI)

    Ryser, R.; Gerber, T.; Dreier, T. [Reaction Analysis Group, Department of General Energy, Paul Scherrer Institute, CH-5232 Villigen (Switzerland)

    2009-01-15

    Single-pulse time-resolved laser-induced incandescence (TiRe-LII) signal transients from soot particulates were acquired during unsteady high pressure Diesel combustion in a constant volume cell for typical top dead center conditions during a Diesel engine cycle. Measurements were performed for initial gas pressures between 1 and 3 MPa, injection pressures between 50 and 130 MPa and laser probe timings between 5 and 16 ms after start of fuel injection. In separate experiments and for the same cell operating conditions gas temperatures were deduced from spectrally resolved soot pyrometry measurements. Implementing the LII model of Kock et al. [Combust. Flame 147 (20006) 79-92] ensemble mean soot particle diameters were evaluated from least-squares fitting of theoretical cooling curves to experimental TiRe-LII signal transients. Since in the experiments the environmental gas temperature and the width of an assumed particle size distribution were not known, the effects of the initial choice of these parameters on retrieved particle diameters were investigated. It is shown that evaluated mean particle diameters are only slightly biased by the choice of typical size distribution widths and gas temperatures. For a fixed combustion phase mean particle diameters are not much affected by gas pressure, however they become smaller at high fuel injection pressure. At a mean chamber pressure of 1.39 MPa evaluated mean particle diameters increased by a factor of two for probe delays between 5 and 16 ms after start of injection irrespective of the choices of first-guess fitting variables, indicating a certain robustness of data analysis procedure. (author)

  19. Soot particle sizing during high-pressure Diesel spray combustion via time-resolved laser-induced incandescence

    SciTech Connect (OSTI)

    Ryser, R.; Gerber, T.; Dreier, T. [Reaction Analysis Group, Department of General Energy, Paul Scherrer Institute, CH-5232 Villigen PSI (Switzerland)

    2008-11-15

    Single-pulse time-resolved laser-induced incandescence (TiRe-LII) signal transients from soot particulates were acquired during unsteady high pressure Diesel combustion in a constant volume cell for typical top dead center conditions during a Diesel engine cycle. Measurements were performed for initial gas pressures between 1 and 3 MPa, injection pressures between 50 and 130 MPa and laser probe timings between 5 and 16 ms after start of fuel injection. In separate experiments and for the same cell operating conditions gas temperatures were deduced from spectrally resolved soot pyrometry measurements. Implementing the LII model of Kock et al. [Combust. Flame 147 (2006) 79-92] ensemble mean soot particle diameters were evaluated from least-squares fitting of theoretical cooling curves to experimental TiRe-LII signal transients. Since in the experiments the environmental gas temperature and the width of an assumed particle size distribution were not known, the effects of the initial choice of these parameters on retrieved particle diameters were investigated. It is shown that evaluated mean particle diameters are only slightly biased by the choice of typical size distribution widths and gas temperatures. For a fixed combustion phase mean particle diameters are not much affected by gas pressure, however they become smaller at high fuel injection pressure. At a mean chamber pressure of 1.39 MPa evaluated mean particle diameters increased by a factor of two for probe delays between 5 and 16 ms after start of injection irrespective of the choices of first-guess fitting variables, indicating a certain robustness of data analysis procedure. (author)

  20. Energy Savings and NOx Emissions Reduction Potential from the 2012 Federal Legislation to Phase Out Incandescent Lamps in Texas 

    E-Print Network [OSTI]

    Liu, Zi; Baltazar, Juan Carlos; Haberl, Jeff; Soman, Rohit

    2010-01-01

    Lamps in Texas Description Value Reference Total Housing Units in Texas in 2013: 10,204,056 Real Estate Center, Texas A&M University3, U.S. Census Bureau4 5 Average Lighting Electricity Usage per House: 1,946 kWh/yr NREL Building America Program6... % of Lamps That can be Retrofitted with a CFL: 70% NREL Building America Program6 and ESL Assumption % of Savings From Replacing Incandescent to CFL Lamps: 75% ESL Assumption CFL Lighting Electricity Savings per House: 1,022 kWh/yr Total Annual CFL...

  1. ISO standardization of scaling factor method for low and intermediate level radioactive wastes generated at nuclear power plants

    SciTech Connect (OSTI)

    Kashiwagi, Makoto; Masui, Hideki; Denda, Yasutaka; James, David; Lantes, Bertrand; Mueller, Wolfgang; Garamszeghy, Mike; Leganes, Jose Luis; Maxeiner, Harald; Van Velzen, Leo

    2007-07-01

    Low- and intermediate-level radioactive wastes (L-ILW ) generated at nuclear power plants are disposed of in various countries. In the disposal of such wastes, it is required that the radioactivity concentrations of waste packages should be declared with respect to difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63 and a-emitting nuclides, which are often limited to maximum values in disposal licenses, safety cases and/or regulations for maximum radioactive concentrations. To fulfill this requirement, the Scaling Factor method (SF method) has been applied in various countries as a principal method for determining the concentrations of DTM nuclides. In the SF method, the concentrations of DTM nuclides are determined by multiplying the concentrations of certain key nuclides by SF values (the determined ratios of radioactive concentration between DTM nuclides and those key nuclides). The SF values used as conversion factors are determined from the correlation between DTM nuclides and key nuclides such as Co-60. The concentrations of key nuclides are determined by {gamma} ray measurements which can be made comparatively easily from outside the waste package. The SF values are calculated based on the data obtained from the radiochemical analysis of waste samples. The use of SFs, which are empirically based on analytical data, has become established as a widely recognized 'de facto standard'. A number of countries have independently collected nuclide data by analysis over many years and each has developed its own SF method, but all the SF methods that have been adopted are similar. The project team for standardization had been organized for establishing this SF method as a 'de jure standard' in the international standardization system of the International Organization for Standardization (ISO). The project team for standardization has advanced the standardization through technical studies, based upon each country's study results and analysis data. The conclusions reached by the project team was published as ISO International Standard 21238:2007 'The Scaling Factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants'. This paper gives an introduction to the international standardization process for the SF method and the contents of the recently published International Standard. (authors)

  2. Effects of aggregate morphology and size on laser-induced incandescence and scattering from black carbon (mature soot)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bambha, Ray P.; Michelsen, Hope A.

    2015-07-03

    We have used a Single-Particle Soot Photometer (SP2) to measure time-resolved laser-induced incandescence (LII) and laser scatter from combustion-generated mature soot with a fractal dimension of 1.88 extracted from a burner. We have also made measurements on restructured mature-soot particles with a fractal dimension of 2.3–2.4. We reproduced the LII and laser-scatter temporal profiles with an energy- and mass-balance model, which accounted for heating of particles passed through a CW-laser beam over laser–particle interaction times of ~10 ?s. Furthermore, the results demonstrate a strong influence of aggregate size and morphology on LII and scattering signals. Conductive cooling competes with absorptivemore »heating on these time scales; the effects are reduced with increasing aggregate size and fractal dimension. These effects can lead to a significant delay in the onset of the LII signal and may explain an apparent low bias in the SP2 measurements for small particle sizes, particularly for fresh, mature soot. The results also reveal significant perturbations to the measured scattering signal from LII interference and suggest rapid expansion of the aggregates during sublimation.« less

  3. PROCEEDINGS of the HUMAN FACTORS AND ERGONOMICS SOCIETY 45th ANNUAL MEETING-2001 THE EFFECT OF A STANDARDIZED DATA COLLECTION FORM ON THE

    E-Print Network [OSTI]

    Virginia, University of

    PROCEEDINGS of the HUMAN FACTORS AND ERGONOMICS SOCIETY 45th ANNUAL MEETING- 2001 THE EFFECT pain is frequently evaluated in an irregular and non-standard manner, even within individual aimed to relieve these problems Departments in the United States are evaluated is by developing

  4. Max Tech Appliance Design: Potential for Maximizing U.S. Energy Savings through Standards

    E-Print Network [OSTI]

    Garbesi, Karina

    2011-01-01

    fluorescent and lighting dominantly incandescent. LED)LED incandescent efficacies are expected to increase lightingLED Heat pump Heat pump Heat pump d Energy Use (TWh) a Lighting (

  5. EA-1664: Final Environmental Assessment

    Broader source: Energy.gov [DOE]

    10 CFR Part 430 Energy Conservation Standards: Energy Conservation Standards for Fluorescent and Incandescent Lamps

  6. Evaluation of the irising effect of a slow-gating intensified charge-coupled device on laser-induced incandescence measurements of soot

    SciTech Connect (OSTI)

    Shaddix, Christopher R.; Williams, Timothy C. [Combustion Research Facility, Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550 (United States)

    2009-03-15

    Intensified charge-coupled devices (ICCDs) are used extensively in many scientific and engineering environments to image weak or temporally short optical events. To optimize the quantum efficiency of light collection, many of these devices are chosen to have characteristic intensifier gate times that are relatively slow, on the order of tens of nanoseconds. For many measurements associated with nanosecond laser sources, such as scattering-based diagnostics and most laser-induced fluorescence applications, the signals rise and decay sufficiently fast during and after the laser pulse that the intensifier gate may be set to close after the cessation of the signal and still effectively reject interferences associated with longer time scales. However, the relatively long time scale and complex temporal response of laser-induced incandescence (LII) of nanometer-sized particles (such as soot) offer a difficult challenge to the use of slow-gating ICCDs for quantitative measurements. In this paper, ultraviolet Rayleigh scattering imaging is used to quantify the irising effect of a slow-gating scientific ICCD camera, and an analysis is conducted of LII image data collected with this camera as a function of intensifier gate width. The results demonstrate that relatively prompt LII detection, generally desirable to minimize the influences of particle size and local gas pressure and temperature on measurements of the soot volume fraction, is strongly influenced by the irising effect of slow-gating ICCDs.

  7. EPCglobal : a universal standard

    E-Print Network [OSTI]

    Aguirre, Juan Ignacio

    2007-01-01

    This thesis evaluates the likelihood of EPCglobal becoming the universal RFID standard by presenting a framework of ten factors used to analyze and determine if EPCglobal is moving in the right direction. The ten factors ...

  8. Luminous Efficacy Standards for General Purpose Lights

    Broader source: Energy.gov [DOE]

    *Efficacy refers to the overall energy efficiency of light and is measured in lumens (measure of light output) per watt (measure of power input). The efficacy of a typical incandescent light bulb...

  9. Incandescent Lighting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLforLDRD Report11,SecurityHomeRemarks As Prepared for

  10. Incandescent Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy ServicesContractingManagementSuccess,Energy

  11. Got Standards? "Got Standards?"

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    or organization chooses to manage their activities. Obtaining ISO 9000 Certification Implementing the ISO 9000, assuming the company complies with the standard of ISO 9000. The ISO 9000 certificate will usually expire 9000 While many companies try to obtain ISO 9000 certification, there are many other different ISO

  12. APPLIANCE STANDARDS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APPLIANCE STANDARDS How they interact with energy efficiency programs Alas, those mercurial baselines. Since 2005, 45 mandatory Department of Energy (DOE) efficiency standards have...

  13. Interconnection Standards

    Broader source: Energy.gov [DOE]

    West Virginia's interconnection standards include two levels of review. The qualifications and application fees for each level are as follows:...

  14. # ###### SQL # ``standard'' ###### ### ######### ###### #########.

    E-Print Network [OSTI]

    Pitoura, Evaggelia

    ' & $ % # ###### SQL # ``standard'' ###### ### ######### ###### #########. ###### Sequel #### IBM ## ##### ### System R, #### SQL (Stuctured Query Language) SQL--89, SQL--92 H SQL #### ####### #######: ffl ############# (authentication) ffl ########### ffl ###### ########## ###### ####### 1 #12; ' & $ % # ###### SQL 1. ###### #### 2

  15. EOS standards

    SciTech Connect (OSTI)

    Greeff, Carl W

    2011-01-12

    An approach to creating accurate EOS for pressure standards is described. Applications to Cu, Au, and Ta are shown. Extension of the method to high compressions using DFT is illustrated. Comparisons with modern functionals show promise.

  16. Energy Standard

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)DecadeYear Jan Feb Mar Apr May Jun2003 Detailed Tablesof1998 and195 0Standard

  17. Analysis of Minimum Efficiency Performance Standards for Residential General Service Lighting in Chile

    SciTech Connect (OSTI)

    Letschert, Virginie E.; McNeil, Michael A.; Leiva Ibanez, Francisco Humberto; Ruiz, Ana Maria; Pavon, Mariana; Hall, Stephen

    2011-06-01

    Minimum Efficiency Performance Standards (MEPS) have been chosen as part of Chile's national energy efficiency action plan. As a first MEPS, the Ministry of Energy has decided to focus on a regulation for lighting that would ban the sale of inefficient bulbs, effectively phasing out the use of incandescent lamps. Following major economies such as the US (EISA, 2007) , the EU (Ecodesign, 2009) and Australia (AS/NZS, 2008) who planned a phase out based on minimum efficacy requirements, the Ministry of Energy has undertaken the impact analysis of a MEPS on the residential lighting sector. Fundacion Chile (FC) and Lawrence Berkeley National Laboratory (LBNL) collaborated with the Ministry of Energy and the National Energy Efficiency Program (Programa Pais de Eficiencia Energetica, or PPEE) in order to produce a techno-economic analysis of this future policy measure. LBNL has developed for CLASP (CLASP, 2007) a spreadsheet tool called the Policy Analysis Modeling System (PAMS) that allows for evaluation of costs and benefits at the consumer level but also a wide range of impacts at the national level, such as energy savings, net present value of savings, greenhouse gas (CO2) emission reductions and avoided capacity generation due to a specific policy. Because historically Chile has followed European schemes in energy efficiency programs (test procedures, labelling program definitions), we take the Ecodesign commission regulation No 244/2009 as a starting point when defining our phase out program, which means a tiered phase out based on minimum efficacy per lumen category. The following data were collected in order to perform the techno-economic analysis: (1) Retail prices, efficiency and wattage category in the current market, (2) Usage data (hours of lamp use per day), and (3) Stock data, penetration of efficient lamps in the market. Using these data, PAMS calculates the costs and benefits of efficiency standards from two distinct but related perspectives: (1) The Life-Cycle Cost (LCC) calculation examines costs and benefits from the perspective of the individual household; and (2) The National Perspective projects the total national costs and benefits including both financial benefits, and energy savings and environmental benefits. The national perspective calculations are called the National Energy Savings (NES) and the Net Present Value (NPV) calculations. PAMS also calculate total emission mitigation and avoided generation capacity. This paper describes the data and methodology used in PAMS and presents the results of the proposed phase out of incandescent bulbs in Chile.

  18. Acting Globally: Potential Carbon Emissions Mitigation Impacts from an International Standards and Labelling Program

    SciTech Connect (OSTI)

    McNeil, Michael A; Letschert, Virginie E.; de la Rue du Can, Stephane; Egan, Christine

    2009-05-29

    This paper presents an analysis of the potential impacts of an international initiative designed to support and promote the development and implementation of appliances standards and labelling programs throughout the world. As part of previous research efforts, LBNL developed the Bottom Up Energy Analysis System (BUENAS), an analysis framework that estimates impact potentials of energy efficiency policies on a global scale. In this paper, we apply this framework to an initiative that would result in the successful implementation of programs focused on high priority regions and product types, thus evaluating the potential impacts of such an initiative in terms of electricity savings and carbon mitigation in 2030. In order to model the likely parameters of such a program, we limit impacts to a five year period starting in 2009, but assume that the first 5 years of a program will result in implementation of 'best practice' minimum efficiency performance standards by 2014. The 'high priority' regions considered are: Brazil, China, the European Union,India, Mexico and the United States. The products considered are: refrigerators, air conditioners, lighting (both fluorescent and incandescent), standby power (for consumer electronics) and televisions in the residential sector, and air conditioning and lighting in commercial buildings. In 2020, these regions and enduses account for about 37percent of global residential electricity and 29percent of electricity in commercial buildings. We find that 850Mt of CO2 could be saved in buildings by 2030 compared to the baseline forecast.

  19. Replacing Incandescent Lightbulbs and Ballasts | Department of...

    Energy Savers [EERE]

    (R)or parabolic reflector (PAR) CFLs for flood and spotlighting. Some CFL fixtures have built-in electronic ballasts and polished metal reflectors. When used in recessed...

  20. Energy-efficient incandescent lamp: Final report

    E-Print Network [OSTI]

    Verderber, R.

    2010-01-01

    more energy than the best " Energy Ef- ficient Incandescentbest available conventional glass envelopes the greatest energyenvelope of best optical accuracy. The energy saving could

  1. Energy-efficient incandescent lamp: Final report

    E-Print Network [OSTI]

    Verderber, R.

    2010-01-01

    have doubled luminous efficacy, corresponding to 50% energyluminous than the clear lamp. The value of visible wattage 1n the energyluminous efficacy without l i f e reduction. Such efficacy Increase corresponds to an energy

  2. Incandescent Lighting Basics | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLAN FOR THE SITE-218in a V2O5 Battery Electrode

  3. Energy-Saving Incandescents | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunities EnergyU.S. DOEEnergy StorageTricks Lead3Image icon

  4. Energy-Saving Incandescents | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunities EnergyU.S. DOEEnergy StorageTricks Lead3Image iconFile

  5. December 2006 Standards Forum and Standards Actions

    Energy Savers [EERE]

    -9 Cancellations in Progress - 0 Inside This Issue Visit the Technical Standards Program Web Site at http:tis.eh.doe.govtechstds December 2006 The Standards Forum and Standards...

  6. Questioning Copyright in Standards

    E-Print Network [OSTI]

    Samuelson, Pam

    2006-01-01

    of privately drafted industry standards). Antitrust problems40, at 308. Thus, industry standards such as the AMA and ADAprotection for industry standards is the claim SSOs make

  7. Communication Standards and Recommendations

    E-Print Network [OSTI]

    Communication Standards and Recommendations Introduction & Purpose 3 Standards & Recommendations Communication 4 Training 10 Evaluation 11 PMO Workgroup Participation 12 Staffing 12 Communications-related Tracking Grantee Portal Standards and Recommendations 13

  8. Environmental Standardization for Sustainability

    E-Print Network [OSTI]

    Bagby, John

    Environmental Standardization for Sustainability by Professor John W. Bagby College of Information that environmental controls are expressed as environmental standards, a traditional driver of investment in pollution control. Environmental standards spur investment in green technologies that promise to stimulate

  9. Energy Efficiency Product Standards

    Broader source: Energy.gov [DOE]

    New Jersey Energy Efficiency Product Standards, enacted in 2005, include minimum standards for eight products, which were preempted by the federal Energy Policy Act of 2005. Future standards, if...

  10. Energy Efficiency Resource Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Washington voters passed Initiative 937 in 2006, creating a renewable energy standard and an energy efficiency resource standard for the state's electric utilities. Initiative 937, enacted as th...

  11. Technical Standards,DOE Standards and Corresponding Directives...

    Broader source: Energy.gov (indexed) [DOE]

    Directives Crosswalk DOE Standards and Corresponding Directives Crosswalk table Technical Standards,DOE Standards and Corresponding Directives Crosswalk More Documents &...

  12. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  13. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  14. TECHNICAL STANDARDS PROGRAM RESPONSIBILITIES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes the responsibilities of persons who are charged with implementing the DOE Technical Standards Program. 

  15. TECHNICAL STANDARDS COMMENT RESOLUTION

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance for resolving comments on DOE Technical Standards that are received during the coordination process. 

  16. Surface Water Quality Standards 

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01

    Standards Team. This advisory group, with representation from water asso- ciations, the agricultural industry, engineering firms, environmental organizations, consumer groups and government entities, is working with TCEQ staff to review and possibly...SURFACE WATER QUALITY STANDARDS AAs part of the ongoing program to manage Texaswater quality, the Texas Commission onEnvironmental Quality (TCEQ) is currently review- ing the Texas Surface Water Quality Standards, including the standards...

  17. Parametrizing Compton form factors with neural networks

    E-Print Network [OSTI]

    Kresimir Kumericki; Dieter Mueller; Andreas Schafer

    2011-12-08

    We describe a method, based on neural networks, of revealing Compton form factors in the deeply virtual region. We compare this approach to standard least-squares model fitting both for a simplified toy case and for HERMES data.

  18. Energy Conservation Standards Activities

    Broader source: Energy.gov (indexed) [DOE]

    Congress August 2014 United States Department of Energy Washington, DC 20585 Energy Conservation Standards Activities Report to Congress | Page i Message from the Assistant...

  19. STANDARD REVIEW PLAN

    Office of Environmental Management (EM)

    Strengthening Line Management Oversight and Federal Monitoring of Nuclear Facilities Standard Review Plan Safety Design Strategy January 2015 OFFICE OF ENVIRONMENTAL MANAGEMENT...

  20. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    Note: H.B. 40, enacted in June 2015, created Vermont's Renewable Energy Standard and repeals the Sustainably Priced Energy Enterprise Development program's renewable energy goals. The Renewable...

  1. SSL Standards and Guidelines

    SciTech Connect (OSTI)

    None

    2012-04-01

    Solid-state lighting program technology fact sheet that reviews the key performance and safety standards applicable to SSL-based lighting products.

  2. The Standard Model

    ScienceCinema (OSTI)

    Lincoln, Don

    2014-08-12

    Fermilab scientist Don Lincoln describes the Standard Model of particle physics, covering both the particles that make up the subatomic realm and the forces that govern them.

  3. Standard Subject Classification System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1979-08-14

    The order establishes the DOE Standard Subject Classification System for classifying documents and records by subject, including correspondence, directives, and forms.Cancels DOE O 0000.1.

  4. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23

    The order establishes the DOE Technical Standards Program. Admin Chg 1, dated 3-12-13 supersedes DOE O 252.1A.

  5. Law as a Network Standard

    E-Print Network [OSTI]

    Burk, DL

    2006-01-01

    benefits of uniform technical standards, and the problemsparallel to those in the analysis of technical standards.Uniform standards, whether technical or legal, give rise to

  6. 90.6% efficient 11MHz 22W LED driver using GaN FETs and burst-mode controller with 0.96 power factor

    E-Print Network [OSTI]

    Chandrakasan, Anantha P.

    With the advent of reliable, high brightness and high efficacy LEDs, the lighting industry is expected to see a significant growth in the near future. However, for LEDs to completely replace the traditional incandescent ...

  7. Standard version Advanced version

    E-Print Network [OSTI]

    Hall, Julian

    Standard version Advanced version Xpress case study: Margaret Oil 26 June 2014 NATCOR Case study #12;Standard version Advanced version Margaret Oil - basic (1) Margaret Oil produces three products: gasoline, jet fuel, and heating oil. The average octane levels must be: Gasoline Jet fuel Heating oil

  8. DOE technical standards list. Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1995-08-01

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  9. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    1999-05-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  10. DOE Announces Selections for SSL Core Technology and Product...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    seeks to develop a small form factor retrofit lamp consisting of a light engine, optics, drive electronics, and thermal management. The lamp is suitable for incandescent or...

  11. Sonication standard laboratory module

    DOE Patents [OSTI]

    Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

    1999-01-01

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  12. Drinking Water Standards 

    E-Print Network [OSTI]

    Dozier, Monty; McFarland, Mark L.

    2006-04-26

    This publication explains the federal safety standards for drinking water provided by public water supply systems. It discusses the legal requirements for public water supplies, the maximum level allowed for contaminants in the water...

  13. FREIGHT CONTAINER LIFTING STANDARD

    SciTech Connect (OSTI)

    POWERS DJ; SCOTT MA; MACKEY TC

    2010-01-13

    This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

  14. Active DOE Technical Standards

    Energy Savers [EERE]

    with DOE Order 5480.23, Nuclear Safety Analysis Reports James O'Brien All Ac ve DOE Technical Standards Document Number Document Title Responsible SLM A-1 As of: 12-May-15...

  15. Standardization of Firearms

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-03-02

    Establishes Department of Energy (DOE) requirements for the standardization of firearms and limitations of firearms inventories maintained in support of safeguards and security activities. Does not cancel other directives.

  16. Building Energy Standards

    Broader source: Energy.gov [DOE]

    The 2015 Vermont Commercial Building Energy Standards (CBES) took effect on March 1, 2015. The code is based on the 2015 IECC, with amendments to incorporate ASHRAE 90.1-2013. The new guidelines ...

  17. Standard Offer Program

    Broader source: Energy.gov [DOE]

    Note: H.B. 40, enacted in June 2015, changes the name of the Sustainably Priced Energy Enterprise Development (SPEED) Program to the Standard Offer Program and replaces the associated state...

  18. Low Carbon Fuel Standards

    E-Print Network [OSTI]

    Sperling, Dan; Yeh, Sonia

    2009-01-01

    S O N I A YE H Low Carbon Fuel Standards The most direct andalternative transportation fuels is to spur innovation withstandard for upstream fuel producers. hen it comes to energy

  19. SAE Standards Support

    SciTech Connect (OSTI)

    Gowri, Krishnan

    2012-11-01

    This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: • Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication • Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

  20. Tracking Grantee Portal Standards and Recommendations Standards and Recommendations Table

    E-Print Network [OSTI]

    Tracking Grantee Portal Standards and Recommendations April 2009 Standards and Recommendations Table Tracking Network Standards Provide both public and secure grantee portals. Provide a link to the Tracking Network's National Portal from individual state portals. Maintain visual consistency among pages

  1. Tracking Grantee Portal Standards and Recommendations Standards and Recommendations Table

    E-Print Network [OSTI]

    Tracking Grantee Portal Standards and Recommendations April 2009 Standards and Recommendations Table Tracking Network Standards Provide both public and secure grantee portals. Provide a link on a grantee's portal. Organize contents of pages to facilitate the identification of detailed information

  2. Department of Energy Standards Index

    SciTech Connect (OSTI)

    1995-08-01

    This TSL, intended for use in selecting and using DOE technical standards and other Government and non-Government standards, provides listing of current and inactive DOE technical standards, non-Government standards adopted by DOE, other Government documents in which DOE has a recorded interest, and cancelled DOE technical standards.

  3. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1997-06-01

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  4. COORDINATION OF DOE TECHNICAL STANDARDS

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance on the formal coordination of DOE Technical Standards in the DOE Technical Standards Program (TSP). The purpose of coordination of draft technical standards...

  5. Physics Beyond the Standard Model

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Beyond the Standard Model 1663 Los Alamos science and technology magazine Latest Issue:October 2015 past issues All Issues submit Physics Beyond the Standard Model...

  6. ISO 50001 Energy Management Standard

    SciTech Connect (OSTI)

    2013-08-12

    This powerful standard from the International Organization for Standardization (ISO) provides an internationally recognized framework for organizations to voluntarily implement an energy management system.

  7. MODEL CONSERVATION STANDARD INTRODUCTION

    E-Print Network [OSTI]

    financial assistance from the Bonneville Power Administration and the region's utilities. In addition of the plan by the Administrator, are directly attributable to such measure or resource. [Northwest Power ActMODEL CONSERVATION STANDARD INTRODUCTION As directed by the Northwest Power Act, the Council has

  8. Model conservation standards bibliography

    SciTech Connect (OSTI)

    Not Available

    1986-06-01

    This bibliography is divided into sections dealing with building design (superinsulation, solar houses, earth sheltered houses, heat loss calculation, lighting, retrofitting); heating, ventilation, and air conditioning; windows; doors; walls; roofs; floors; air leakage/infiltration; insulation materials; indoor air quality; moisture; performance; codes, laws, standards; economics; and program description. (DLC)

  9. Clothing Quality Standards 

    E-Print Network [OSTI]

    2006-05-01

    stream_source_info pdf_2298.pdf.txt stream_content_type text/plain stream_size 20810 Content-Encoding ISO-8859-1 stream_name pdf_2298.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Clothing Quality Standards E-403...

  10. Derived Concentration Technical Standard

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-05

    This standard supports the implementation of Department of Energy (DOE) Order 458.1, Radiation Protection of the Public and the Environment. It also establishes the numerical values of DCSs in a manner reflecting the current state of knowledge and practice in radiation protection

  11. UCIT Data Network Standards Campus Wireless Network Standard

    E-Print Network [OSTI]

    Habib, Ayman

    UCIT Data Network Standards Campus Wireless Network Standard Classification IT Infrastructure Table.1. Standardization of the U of C's 802.11 wireless networks and frequency bands is required to insure availability of the wireless network to the campus community. Standards of use will improve the wireless service and help

  12. The Evolution of Vertical IS Standards: Electronic Interchange Standards

    E-Print Network [OSTI]

    Steinfield, Charles

    on the technical details of IT-related standards, surprisingly little empirical research addresses the development from horizontal standards, not only in their narrower applicability, but also in their technical conteThe Evolution of Vertical IS Standards: Electronic Interchange Standards in the US Home Mortgage

  13. DOE standard: Radiological control

    SciTech Connect (OSTI)

    Not Available

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  14. Human Factors @ UB Fall 2010 Human Factors

    E-Print Network [OSTI]

    Krovi, Venkat

    . Outsourcing aviation maintenance: Hu- man factors implications, specifically for communications. C. Drury, K. Guy, C. Wenner. International Journal of Aviation Psychology, 2010, 20, 124 ­ 143. #12;2 Human Factors

  15. Underwater Lighting by Submerged Lasers and Incandescent Sources

    E-Print Network [OSTI]

    Duntley, Seibert Q

    1971-01-01

    case contains a rotary solenoid with its axle protrudingcylinder containing a rotary solenoid is mount- ed above theshown in Fig. 7-9 is a rotary solenoid which is a part This

  16. DOE Requires Manufacturer and Labeler to Cease Sale of Incandescent

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department ofRefrigeratorsDepartmentEP9425

  17. How Energy-Efficient Light Bulbs Compare with Traditional Incandescents |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy ServicesContracting OversightEMSHome

  18. BOISE STATE UNIVERSITY CAMPUS STANDARDS

    E-Print Network [OSTI]

    Barrash, Warren

    experience. It addresses the look and feel of the physical environment by focusing on design elements1 BOISE STATE UNIVERSITY CAMPUS STANDARDS AND DESIGN GUIDELINES 1 CAMPUS STANDARDS AND DESIGN Standards and Design Guidelines are standard and enforceable design guidelines for all design

  19. PHYSICAL PARAMETERS OF STANDARD AND BLOWOUT JETS

    SciTech Connect (OSTI)

    Pucci, Stefano; Romoli, Marco; Poletto, Giannina; Sterling, Alphonse C.

    2013-10-10

    The X-ray Telescope on board the Hinode mission revealed the occurrence, in polar coronal holes, of much more numerous jets than previously indicated by the Yohkoh/Soft X-ray Telescope. These plasma ejections can be of two types, depending on whether they fit the standard reconnection scenario for coronal jets or if they include a blowout-like eruption. In this work, we analyze two jets, one standard and one blowout, that have been observed by the Hinode and STEREO experiments. We aim to infer differences in the physical parameters that correspond to the different morphologies of the events. To this end, we adopt spectroscopic techniques and determine the profiles of the plasma temperature, density, and outflow speed versus time and position along the jets. The blowout jet has a higher outflow speed, a marginally higher temperature, and is rooted in a stronger magnetic field region than the standard event. Our data provide evidence for recursively occurring reconnection episodes within both the standard and the blowout jet, pointing either to bursty reconnection or to reconnection occurring at different locations over the jet lifetimes. We make a crude estimate of the energy budget of the two jets and show how energy is partitioned among different forms. Also, we show that the magnetic energy that feeds the blowout jet is a factor of 10 higher than the magnetic energy that fuels the standard event.

  20. Standardized radiological dose evaluations

    SciTech Connect (OSTI)

    Peterson, V.L.; Stahlnecker, E.

    1996-05-01

    Following the end of the Cold War, the mission of Rocky Flats Environmental Technology Site changed from production of nuclear weapons to cleanup. Authorization baseis documents for the facilities, primarily the Final Safety Analysis Reports, are being replaced with new ones in which accident scenarios are sorted into coarse bins of consequence and frequency, similar to the approach of DOE-STD-3011-94. Because this binning does not require high precision, a standardized approach for radiological dose evaluations is taken for all the facilities at the site. This is done through a standard calculation ``template`` for use by all safety analysts preparing the new documents. This report describes this template and its use.

  1. Standard Scenarios Annual Report

    Broader source: Energy.gov [DOE]

    The National Renewable Energy Laboratory is conducting a study sponsored by the U.S. Department of Energy DOE, Office of Energy Efficiency and Renewable Energy (EERE), that aims to document and implement an annual process designed to identify a realistic and timely set of input assumptions (e.g., technology cost and performance, fuel costs), and a diverse set of potential futures (standard scenarios), initially for electric sector analysis.

  2. Standard interface file handbook

    SciTech Connect (OSTI)

    Shapiro, A.; Huria, H.C. )

    1992-10-01

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  3. Standard Review Plan Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4EnergySolidof2Standard Method of Test

  4. Seminar on Software Engineering Software Standards

    E-Print Network [OSTI]

    Feitelson, Dror

    APIs and protocols Process standards Quality standards Software engineering terminology Lifecycle- operability Certification, guidelines Assurances #12;Software Standards Quality standards are rare - HardSeminar on Software Engineering Software Standards #12;"the good thing about standards

  5. Proton form factor effects in hydrogenic atoms

    SciTech Connect (OSTI)

    Daza, F. Garcia; Kelkar, N. G.; Nowakowski, M.

    2011-10-21

    The proton structure corrections to the hyperfine splittings in electronic and muonic hydrogen are evaluated using the Breit potential with electromagnetic form factors. In contrast to other methods, the Breit equation with q{sup 2} dependent form factors is just an extension of the standard Breit equation which gives the hyperfine splitting Hamiltonian. Precise QED corrections are comparable to the structure corrections which therefore need to be evaluated ab initio.

  6. Standards Panel: 1. Stephen Diamond, General Manager, Industry Standards Office and Global Standards Officer, EMC

    E-Print Network [OSTI]

    Standards Panel: 1. Stephen Diamond, General Manager, Industry Standards Office and Global was President of the IEEE Computer Society. Steve is General Manager of the Industry Standards Office at EMC Standards Officer, EMC Corporation, Office of the CTO Steve Diamond has 30 years of management, marketing

  7. The Transcription Factor Encyclopedia

    E-Print Network [OSTI]

    2012-01-01

    Transcription Factor Encyclopedia. Genome Biology 2012 13:Factor Encyclopedia. Gen- ome Biology 2012, 13:000. where ‘Biology 2012, 13:R24 http://genomebiology.com/2012/13/3/R24 SOFTWARE Open Access The Transcription Factor Encyclopedia

  8. 168 / JOURNAL OF STRUCTURAL ENGINEERING / FEBRUARY 2001 GUST LOADING FACTOR: NEW MODEL

    E-Print Network [OSTI]

    Kareem, Ahsan

    )]. It should be pointed out that the Australian Standard (1989) and the ACI standard (1988) use the GLF and standards around the world. In this scheme, the equivalent static wind loading used for design is equal and standards. Currently, the ESWL in building codes is estimated based on the ``gust load- ing factor'' (GLF

  9. Standards of Conduct

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effect Photovoltaics -7541C.3 SpecialSponsorJurczynski and HansStanStandards

  10. Title Standards 2001

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyThe U.S.Laclede GasEfficiency| Department of Energy TheMeeksStandards 2001 A

  11. Standards | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVESDepartmentSpecialCode of Record Standard

  12. ORISE: Standards development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesseworkSURVEY UNIVERSEHow ORISE is MakingScience EducationStandards

  13. Standard-E hydrogen monitoring system field acceptance testprocedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-02-01

    The purpose of this document is to demonstrate that the Standard-E Hydrogen Monitoring Systems (SHMS-E) installed on the Waste Tank Farms in the Hanford 200 Areas are constructed as intended by the design.

  14. A discussion SuStainability StandardS

    E-Print Network [OSTI]

    A discussion SuStainability StandardS in China­latin ameriCa trade and inveStment Emma Blackmor@iied.org, www.iied.org/pubs Citation Blackmore, E. Li, D., and Casallas, S. (2013). Sustainability standards.regent-typesetting.co.uk Photo credit Simon Lim Edited by Nina Berhman Series Editor Emma Blackmore Shaping Sustainable Markets

  15. New standard exceeds expectations

    SciTech Connect (OSTI)

    Bennett, M.J. (Environmental Data Resources Inc., Southport, CT (United States))

    1993-08-01

    The new ASTM environmental due diligence standard is delivering far more than expected when it was conceived in 1990. Its use goes well beyond the relatively narrow legal liability protection that was the primary goal in its development. The real estate industry, spearheaded by the lending community, was preoccupied with environmental risk and liability. Lenders throughout the concept's evolution have been at the forefront in defining environmental due diligence. The lender liability rule is intended to protect property owners from CERCLA liability for property they own or companies they manage (for example, as a result of foreclosure). The new site assessment standard increasingly is considered a benchmark for prudent environmental due diligence in the interest of risk management, not legal liability. The focus on risk management, including collateral devaluation and corporate credit risk, are becoming dominant areas of policy focus in the lending industry. Lenders now are revising their policies to incorporate transactions beyond issues of real estate, in which a company's economic viability and ability to service debt could be impacted by an environmental problem unrelated to property transfers.

  16. Standard Templates Adaptive Parallel Library 

    E-Print Network [OSTI]

    Arzu, Francisco Jose

    2000-01-01

    STAPL (Standard Templates Adaptive Parallel Library) is a parallel C++ library designed as a superset of the C++ Standard Template Library (STL), sequentially consistent for functions with the same name, and executed on uni- or multi- processor...

  17. Energy Standards for State Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    The State is still required by statute to adopt planning and construction standards for state buildings that conserve energy and optimize the energy performance of new buildings. The standards mu...

  18. Energy Efficiency Standards for Appliances

    Broader source: Energy.gov [DOE]

    In 2007 the District of Columbia (D.C.) enacted legislation, entitled the Energy Efficiency Standards Act of 2007, which created efficiency standards for six products, four of which were...

  19. Energy Efficiency Standards for Appliances

    Broader source: Energy.gov [DOE]

    Connecticut enacted efficiency standards through legislative actions in 2004 and 2007 and 2011. This law covers the following products that have not been pre-empted by federal standards:...

  20. DeterminingEGRET's EfficiencyScalingFactors 1 Introduction

    E-Print Network [OSTI]

    Strong, Andrew W.

    DeterminingEGRET's EfficiencyScalingFactors 1 Introduction The efficiencyof EGRET changedthroughout procedurewas needed to be able to track the efficienciesof the standard energyinterval to very low levels

  1. On the Consistency of QCBED Structure Factor Measurements for...

    Office of Scientific and Technical Information (OSTI)

    for bond-charge mapping. The standard deviation in the resulting distribution of derived X-ray structure factors is found to be an order of magnitude smaller than that in...

  2. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  3. Environmental Public Health Performance Standards

    E-Print Network [OSTI]

    Environmental Public Health Performance Standards (Version 2.0) Updated May 2014 National Center for Environmental Health Division of Emergency and Environmental Health Services #12;#12;Environmental Public Health Performance Standards (Version 2.0) Updated May 2014 #12;Environmental Public Health Performance Standards

  4. AN UPDATE ON CRYPTOGRAPHIC STANDARDS,

    E-Print Network [OSTI]

    has worked actively with other government and industry organizations to develop standards government and industry organizations to develop standards and guidelines for the cost-effective usesMay 2006 AN UPDATE ON CRYPTOGRAPHIC STANDARDS, GUIDELINES, AND TESTING REQUIREMENTS AN UPDATE

  5. China Cools with Tighter RAC Standards

    E-Print Network [OSTI]

    Lin, Jiang; Rosenquist, Gregory

    2006-01-01

    standards on energy savings, electric generation capacity,standards on energy savings, electric generation capacity,

  6. Technical Standards Newsletter - September 2004 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    The Standards Forum and Standards Actions - September 2004 Inside this issue: TSP Manager's Note... 1 Pollution...

  7. Microfabricated ion frequency standard

    DOE Patents [OSTI]

    Schwindt, Peter (Albuquerque, NM); Biedermann, Grant (Albuquerque, NM); Blain, Matthew G. (Albuquerque, NM); Stick, Daniel L. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM); Olsson, III, Roy H. (Albuquerque, NM)

    2010-12-28

    A microfabricated ion frequency standard (i.e. an ion clock) is disclosed with a permanently-sealed vacuum package containing a source of ytterbium (Yb) ions and an octupole ion trap. The source of Yb ions is a micro-hotplate which generates Yb atoms which are then ionized by a ultraviolet light-emitting diode or a field-emission electron source. The octupole ion trap, which confines the Yb ions, is formed from suspended electrodes on a number of stacked-up substrates. A microwave source excites a ground-state transition frequency of the Yb ions, with a frequency-doubled vertical-external-cavity laser (VECSEL) then exciting the Yb ions up to an excited state to produce fluorescent light which is used to tune the microwave source to the ground-state transition frequency, with the microwave source providing a precise frequency output for the ion clock.

  8. Non standard neutrino interactions

    E-Print Network [OSTI]

    Miranda, O G

    2015-01-01

    Neutrino oscillations have become well-known phenomenon; the measurements of neutrino mixing angles and mass squared differences are continuously improving. Future oscillation experiments will eventually determine the remaining unknown neutrino parameters, namely, the mass ordering, normal or inverted, and the CP-violating phase. On the other hand, the absolute mass scale of neutrinos could be probed by cosmological observations, single beta decay as well as by neutrinoless double beta decay experiments. Furthermore, the last one may shed light on the nature of neutrinos, Dirac or Majorana, by measuring the effective Majorana mass of neutrinos. However, the neutrino mass generation mechanism remains unknown. A well-motivated phenomenological approach to search for new physics, in the neutrino sector, is that of non-standard interactions. In this short review, the current constraints in this picture, as well as the perspectives from future experiments, are discussed.

  9. Standard Clock in Primordial Density Perturbations and Cosmic Microwave Background

    E-Print Network [OSTI]

    Xingang Chen; Mohammad Hossein Namjoo

    2014-08-27

    Standard Clocks in the primordial epoch leave a special type of features in the primordial perturbations, which can be used to directly measure the scale factor of the primordial universe as a function of time a(t), thus discriminating between inflation and alternatives. We have started to search for such signals in the Planck 2013 data using the key predictions of the Standard Clock. In this Letter, we summarize the key predictions of the Standard Clock and present an interesting candidate example in Planck 2013 data. Motivated by this candidate, we construct and compute full Standard Clock models and use the more complete prediction to make more extensive comparison with data. Although this candidate is not yet statistically significant, we use it to illustrate how Standard Clocks appear in Cosmic Microwave Background and how they can be further tested by future data. We also use it to motivate more detailed theoretical model building.

  10. ARM Standards Policy Committee Report

    SciTech Connect (OSTI)

    Cialella, A; Jensen, M; Koontz, A; McFarlane, S; McCoy, R; Monroe, J; Palanisamy, G; Perez, R; Sivaraman, C

    2012-09-19

    Data and metadata standards promote the consistent recording of information and are necessary to ensure the stability and high quality of Atmospheric Radiation Measurement (ARM) Climate Research Facility data products for scientific users. Standards also enable automated routines to be developed to examine data, which leads to more efficient operations and assessment of data quality. Although ARM Infrastructure agrees on the utility of data and metadata standards, there is significant confusion over the existing standards and the process for allowing the release of new data products with exceptions to the standards. The ARM Standards Policy Committee was initiated in March 2012 to develop a set of policies and best practices for ARM data and metadata standards.

  11. Environmental standards provide competitive advantage

    SciTech Connect (OSTI)

    Chynoweth, E.; Kirshner, E.

    1993-04-28

    Quality organizations are breaking new ground with the development of international standards for environmental management. These promise to provide the platform for chemical companies wanting to establish their environmental credibility with a global audience. [open quotes]It will be similar to auditing our customers to ISO 9000[close quote], says the environmental manager for a European chemical firm. [open quote]We will only want to deal with people who have got their environmental act together. And we'll be in a better competitive positions[close quote]. The International Organization for Standardization (ISO;Geneva) has set up a taskforce to develop an environmental management standard, which is expected to be completed by the mid-1990s. Observers think the ISO standard will draw heavily on the British Standard Institute's (BSI;London) environmental management standard, BS7750, which will likely be the first system adopted in the world. Published last year, BS7750 has been extensively piloted in the UK (CW, Sept. 30, 1992, p. 62) and is now set to be revised before being offically adopted by BSI. The UK's Chemical Industries Association (CIA;London) is anxious to prevent a proliferation of standards, and its report on BS7750 pilot projects calls for an approach integrating quality, environment, and health and safety. But standard setters, including ISO, appear to be moving in the opposite direction. In the US, the American national Standards Institute (ANSI;Washington) has started work on an environmental management standard.

  12. Project Analysis Standard Operating Procedure

    Office of Environmental Management (EM)

    Standard Operating Procedure (EPASOP) Issued by Office of Acquisition and Project Management MA-63 March 12, 2014 DEPARTMENT OF ENERGY Office of Acquisition and Project...

  13. web identity standards introduction .............................................................................................................87

    E-Print Network [OSTI]

    Mullins, Dyche

    web identity standards sectionten 86 contents introduction............................................................................................................... 89-90 tagline and the web .................................................................................................91 tagline and the web: improper use

  14. Modeling Gaps and Overlaps of Sustainability Standards

    E-Print Network [OSTI]

    D'Alessio, Anna E.; Witherell, Paul; Rachuri, Sudarsan

    2012-01-01

    the standards and an understanding of the technical analysisSustainability Standards Modeling Results of Technicalfor the technical analysis of sustainability standards.

  15. Ergonomic accessibility standards D. W. Fourney, J. A. Carter

    E-Print Network [OSTI]

    Carter, Jim

    Ergonomic accessibility standards D. W. Fourney, J. A. Carter a a Department of Computer Science to be used in calls-for-proposal for personal computer systems [1]. The Human Factors and Ergonomics Society committee submitted their work to date to ISO committee TC159/SC4/WG5 Software Ergonomics and Human Computer

  16. LOW VOLTAGE ANALOG CIRCUITS USING STANDARD CMOS TECHNOLOGY

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    LOW VOLTAGE ANALOG CIRCUITS USING STANDARD CMOS TECHNOLOGY Phillip E. Allen, Benjamin J. Blalock implies battery operation which favors low voltage and low power circuits. These factors and others have of the magnitudes of the n-channel and p-channel thresholds [4]. This implies that low voltage analog circuits

  17. Time Series Photometry Data: Standard Access, Standard Formats

    E-Print Network [OSTI]

    Holl, András

    Time Series Photometry Data: Standard Access, Standard Formats Andr#19; as Holl Konkoly Observatory a discussion on data access and #12;le format aspects of photometry. Introduction Presently there is time series photometry data available in public databases, but the access to these varies from one collection

  18. Standard and non standard ideas for the Higgs boson sector

    E-Print Network [OSTI]

    Abbondandolo, Alberto

    Standard and non standard ideas for the Higgs boson sector Riccardo Barbieri Johns Hopkins Workshop as the Higgs boson is in their low-energy spectrum We only know of approximate symmetries that can explain synoptic table Supersymmetric The SM Higgs boson TC-like Minimally extended Higgsless "Composite" 5

  19. Standard-E hydrogen monitoring system shop acceptance test procedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  20. Sample size in factor analysis: The role of model error

    E-Print Network [OSTI]

    MacCallum, R. C.; Widaman, K. F.; Preacher, Kristopher J.; Hong, Sehee

    2001-01-01

    Equation 1: (2) H9018 yy = H9011H9021H9011H11032 + H9008 2 where H9018 yy is the p ? p population covariance matrix for the measured variables and H9021 is the r ? r population correlation matrix for the common factors (assuming factors are standardized... in the population). This is the standard version of the common factor model for a population covariance matrix. Following similar algebraic procedures, we could derive a structure for a sample covariance matrix, C yy . However, in such a derivation we can...

  1. Federal Information Processing Standards Publication 197

    E-Print Network [OSTI]

    controls. Exports of cryptographic modules implementing this standard and technical data regarding themFederal Information Processing Standards Publication 197 November 26, 2001 Announcing the ADVANCED ENCRYPTION STANDARD (AES) Federal Information Processing Standards Publications (FIPS PUBS) are issued

  2. Appliance Standards and Rulemaking Federal Advisory Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Issuance Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Standards Enforcement Working Group; Notice of Open...

  3. How to align field guides and standards to the Standard Work Specifications

    Broader source: Energy.gov [DOE]

    This presentation demonstrates how to align field guides and standards to the Standard Work Specifications.

  4. National Green Building Standard Analysis

    SciTech Connect (OSTI)

    none,

    2012-07-01

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  5. Functional design criteria for standard hydrogen monitoring system portable platform

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-01-17

    Functional design description for a Standard-E cabinet arrangement Standard Hydrogen Monitoring System Portable Platform.

  6. Commercial Building Codes and Standards

    Broader source: Energy.gov [DOE]

    Once an energy-efficient technology or practice is widely available in the market, it can become the baseline of performance through building energy codes and equipment standards. The Building...

  7. Chiral extrapolation of nucleon magnetic form factors

    SciTech Connect (OSTI)

    P. Wang; D. Leinweber; A. W. Thomas; R.Young

    2007-04-01

    The extrapolation of nucleon magnetic form factors calculated within lattice QCD is investigated within a framework based upon heavy baryon chiral effective-field theory. All one-loop graphs are considered at arbitrary momentum transfer and all octet and decuplet baryons are included in the intermediate states. Finite range regularization is applied to improve the convergence in the quark-mass expansion. At each value of the momentum transfer (Q{sup 2}), a separate extrapolation to the physical pion mass is carried out as a function of m{sub {pi}} alone. Because of the large values of Q{sup 2} involved, the role of the pion form factor in the standard pion-loop integrals is also investigated. The resulting values of the form factors at the physical pion mass are compared with experimental data as a function of Q{sup 2} and demonstrate the utility and accuracy of the chiral extrapolation methods presented herein.

  8. Defining a Standard Metric for Electricity Savings

    SciTech Connect (OSTI)

    Brown, Marilyn; Akbari, Hashem; Blumstein, Carl; Koomey, Jonathan; Brown, Richard; Calwell, Chris; Carter, Sheryl; Cavanagh, Ralph; Chang, Audrey; Claridge, David; Craig, Paul; Diamond, Rick; Eto, Joseph H.; Fulkerson, William; Gadgil, Ashok; Geller, Howard; Goldemberg, Jose; Goldman, Chuck; Goldstein, David B.; Greenberg, Steve; Hafemeister, David; Harris, Jeff; Harvey, Hal; Heitz, Eric; Hirst, Eric; Hummel, Holmes; Kammen, Dan; Kelly, Henry; Laitner, Skip; Levine, Mark; Lovins, Amory; Masters, Gil; McMahon, James E.; Meier, Alan; Messenger, Michael; Millhone, John; Mills, Evan; Nadel, Steve; Nordman, Bruce; Price, Lynn; Romm, Joe; Ross, Marc; Rufo, Michael; Sathaye, Jayant; Schipper, Lee; Schneider, Stephen H; Sweeney, James L; Verdict, Malcolm; Vorsatz, Diana; Wang, Devra; Weinberg, Carl; Wilk, Richard; Wilson, John; Worrell, Ernst

    2009-03-01

    The growing investment by governments and electric utilities in energy efficiency programs highlights the need for simple tools to help assess and explain the size of the potential resource. One technique that is commonly used in this effort is to characterize electricity savings in terms of avoided power plants, because it is easier for people to visualize a power plant than it is to understand an abstraction such as billions of kilowatt-hours. Unfortunately, there is no standardization around the characteristics of such power plants. In this letter we define parameters for a standard avoided power plant that have physical meaning and intuitive plausibility, for use in back-of-the-envelope calculations. For the prototypical plant this article settles on a 500 MW existing coal plant operating at a 70percent capacity factor with 7percent T&D losses. Displacing such a plant for one year would save 3 billion kW h per year at the meter and reduce emissions by 3 million metric tons of CO2 per year. The proposed name for this metric is the Rosenfeld, in keeping with the tradition among scientists of naming units in honor of the person most responsible for the discovery and widespread adoption of the underlying scientific principle in question--Dr. Arthur H. Rosenfeld.

  9. Technical Standards Newsletter - May 2001 | Department of Energy

    Energy Savers [EERE]

    Technical Standards Newsletter - May 2001 Technical Standards Newsletter - May 2001 The Standards Forum and Standards Actions - May 2001 INSIDE THIS ISSUE: DOE Technical Standards...

  10. Diagnostic Medical Sonography Clinical Technical Standards

    E-Print Network [OSTI]

    Barrash, Warren

    Diagnostic Medical Sonography Clinical Technical Standards Listed below are the technical standards identified for students in the Diagnostic Medical Sonography (DMS) clinical program. Review each standard and think about your ability to meet the standard 100% or if you are unable to meet the standard, what

  11. Nuclear Data Verification and Standardization

    SciTech Connect (OSTI)

    Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

    2011-10-01

    The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

  12. The MX Factor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MX Factor Test films played a strategic-planning role in the debates of the late 1970s and early 1980s about where and how to deploy the MX intercontinental ballistic missile...

  13. Power Factor Improvement 

    E-Print Network [OSTI]

    Viljoen, T. A.

    1979-01-01

    and disadvantages of various locations in the electrical network are described including the cost of installation and network capacity improvement. Sizing of capacitors is also covered. Finally, some case studies involving power factor improvement are presented...

  14. Reducing Power Factor Cost

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Before PF 100142 0.70 or 70% After PF 100105 0.95 or 95% PB References: B.C. Hydro. Power Factor. The GEM Series. October 1989. Commonwealth Sprague Capacitor, Inc....

  15. Electromagetic proton form factors

    E-Print Network [OSTI]

    M Y Hussein

    2006-10-31

    The electromagnetic form factors are crucial to our understanding of the proton internal structure, and thus provide a strong constraint of the distributions of the charge and magnetization current within the proton. We adopted the quark-parton model for calculating and understanding the charge structure of the proton interms of the electromagnetic form factors. A remarkable agreement with the available experimental evidence is found.

  16. Optimizing Power Factor Correction 

    E-Print Network [OSTI]

    Phillips, R. K.; Burmeister, L. C.

    1986-01-01

    FACTOR CORRECTION Robert K. Phillips and Louis C. Burmeister, Mechanical Engineering, University of Kansas, Lawrence, KS The optimal investment for power factor correcting capacitors for Kansas Power and Light Company large power contract customers... consumer of electricity were made for demands of 200, 400, 800, 1,600, 3,200, and 6,400 k\\~ and monthly energy consumption periods of 100, 150, 200, 300, 400, and 500 hours for several capacitor purchase and installation costs. The results...

  17. FGF growth factor analogs

    DOE Patents [OSTI]

    Zamora, Paul O. (Gaithersburg, MD); Pena, Louis A. (Poquott, NY); Lin, Xinhua (Plainview, NY); Takahashi, Kazuyuki (Germantown, MD)

    2012-07-24

    The present invention provides a fibroblast growth factor heparin-binding analog of the formula: ##STR00001## where R.sub.1, R.sub.2, R.sub.3, R.sub.4, R.sub.5, X, Y and Z are as defined, pharmaceutical compositions, coating compositions and medical devices including the fibroblast growth factor heparin-binding analog of the foregoing formula, and methods and uses thereof.

  18. George Mason University Architecture Standards Committee Charter

    E-Print Network [OSTI]

    and maintain technology architecture standards; · Establish, publish and maintain software development, testing bodies; · Assess periodically technology architecture standards; · Assess periodically the proceduresGeorge Mason University Architecture Standards Committee Charter Page 1 of 3 12/2/2013 Purpose

  19. An overview of software safety standards

    SciTech Connect (OSTI)

    Lawrence, J.D.

    1995-10-01

    The writing of standards for software safety is an increasingly important activity. This essay briefly describes the two primary standards-writing organizations, IEEE and IEC, and provides a discussion of some of the more interesting software safety standards.

  20. Information Technology: American National Standard for Information

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format-271 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange Sponsored by Information Access Division Information Technology Laboratory National Institute of Standards

  1. An Estoppel Doctrine for Patented Standards

    E-Print Network [OSTI]

    Merges, Robert P; Kuhn, Jeffrey

    2008-01-01

    to defend suit over industry standards, but the patenteesThrough the Capture of Industry Standards, 17 B ERKELEY Tin the face of an industry standard that infringes a patent

  2. The standard model and colliders

    SciTech Connect (OSTI)

    Hinchliffe, I.

    1987-03-01

    Some topics in the standard model of strong and electroweak interactions are discussed, as well as how these topics are relevant for the high energy colliders which will become operational in the next few years. The radiative corrections in the Glashow-Weinberg-Salam model are discussed, stressing how these corrections may be measured at LEP and the SLC. CP violation is discussed briefly, followed by a discussion of the Higgs boson and the searches which are relevant to hadron colliders are then discussed. Some of the problems which the standard model does not solve are discussed, and the energy ranges accessible to the new colliders are indicated. (LEW)

  3. Power-Factor Compensation

    E-Print Network [OSTI]

    Stankoviæ, Aleksandar

    and inductors as well as power elec- tronic converters, such as active filters and flexible ac transmission- tures the energy-transmission efficiency for a given load. The standard approach to improving the power of nonsinusoidal signals in energy networks at all power levels. An unfortunate consequence of the inclu- sion

  4. Technical Standards, Program Project Justification Statement...

    Broader source: Energy.gov (indexed) [DOE]

    August 29, 2012 DOE Technical Standards Program Project Justification Statement As part of the new justification process for developing or revising DOE Technical Standards,...

  5. Quality Assurance Functional Area Qualification Standard - DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear facilities. DOE-STD-1150-2013, Quality Assurance Functional Area Qualification Standard Type: Invoked Technical Standards Status: Current Approved Date: Dec 02, 2013...

  6. Developing Integrated National Design Standards for Offshore...

    Energy Savers [EERE]

    Developing Integrated National Design Standards for Offshore Wind Plants Developing Integrated National Design Standards for Offshore Wind Plants January 6, 2014 - 10:00am Addthis...

  7. Standardization of Transport Properties Measurements: Internal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standardization of Transport Properties Measurements: Internal Energy Agency (IEA-AMT) Annex on Thermoelectric Standardization of Transport Properties Measurements: Internal Energy...

  8. Enforcement Policy Statement: Regional Standards Enforcement...

    Office of Environmental Management (EM)

    set forth amended energy conservation standards for central air conditioners and heat pumps, including regional standards in certain States. 76 FR 37408. DOE has initiated a...

  9. Cooperation on Sustainability Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cooperation on Sustainability Standards Cooperation on Sustainability Standards Keith Kline, ORNL, presentation at the December 5, 2012, Biomass Program-hosted International...

  10. Standards Increase Market Confidence in SSL Performance

    SciTech Connect (OSTI)

    2013-09-30

    Fact sheet that reviews current and future SSL standards developed by DOE and other standards-setting organizations to effectively measure and characterize SSL lighting products.

  11. Furniture Standards Contract Price Guide

    E-Print Network [OSTI]

    Sussex, University of

    1 Furniture Standards Contract Price Guide Issue 1 - July 2007 www.broadstock.co.uk University of Sussex #12;2 Contents Office 5 1600 x 1600 Universal workstations 6 Double wave desks 7 Fixed tables 7 Circular tables 7 Bench 8 Screens 10 Electrics 12 Storage 13 Pedestals 14 Magnus wooden storage 15 Metrix

  12. Residential ventilation standards scoping study

    SciTech Connect (OSTI)

    McKone, Thomas E.; Sherman, Max H.

    2003-10-01

    The goals of this scoping study are to identify research needed to develop improved ventilation standards for California's Title 24 Building Energy Efficiency Standards. The 2008 Title 24 Standards are the primary target for the outcome of this research, but this scoping study is not limited to that timeframe. We prepared this scoping study to provide the California Energy Commission with broad and flexible options for developing a research plan to advance the standards. This document presents the findings of a scoping study commissioned by the Public Interest Energy Research (PIER) program of the California Energy Commission to determine what research is necessary to develop new residential ventilation requirements for California. This study is one of three companion efforts needed to complete the job of determining the ventilation needs of California residences, determining the bases for setting residential ventilation requirements, and determining appropriate ventilation technologies to meet these needs and requirements in an energy efficient manner. Rather than providing research results, this scoping study identifies important research questions along with the level of effort necessary to address these questions and the costs, risks, and benefits of pursuing alternative research questions. In approaching these questions and corresponding levels of effort, feasibility and timing were important considerations. The Commission has specified Summer 2005 as the latest date for completing this research in time to update the 2008 version of California's Energy Code (Title 24).

  13. Nanoscale Stress Measurements and Standards

    E-Print Network [OSTI]

    Magee, Joseph W.

    Nanoscale Stress Measurements and Standards SEMICONDUCTORS Our objective is to develop accurate and lifetime, and address a critical measurement need in the MEMS industry, i.e., 90 % of MEMS customers and Customers · The semiconductor microelectronics industry is a $250B worldwide market with 9% cumulative

  14. Multi-factor authentication

    DOE Patents [OSTI]

    Hamlet, Jason R; Pierson, Lyndon G

    2014-10-21

    Detection and deterrence of spoofing of user authentication may be achieved by including a cryptographic fingerprint unit within a hardware device for authenticating a user of the hardware device. The cryptographic fingerprint unit includes an internal physically unclonable function ("PUF") circuit disposed in or on the hardware device, which generates a PUF value. Combining logic is coupled to receive the PUF value, combines the PUF value with one or more other authentication factors to generate a multi-factor authentication value. A key generator is coupled to generate a private key and a public key based on the multi-factor authentication value while a decryptor is coupled to receive an authentication challenge posed to the hardware device and encrypted with the public key and coupled to output a response to the authentication challenge decrypted with the private key.

  15. Geothermal Plant Capacity Factors

    SciTech Connect (OSTI)

    Greg Mines; Jay Nathwani; Christopher Richard; Hillary Hanson; Rachel Wood

    2015-01-01

    The capacity factors recently provided by the Energy Information Administration (EIA) indicated this plant performance metric had declined for geothermal power plants since 2008. Though capacity factor is a term commonly used by geothermal stakeholders to express the ability of a plant to produce power, it is a term frequently misunderstood and in some instances incorrectly used. In this paper we discuss how this capacity factor is defined and utilized by the EIA, including discussion on the information that the EIA requests from operations in their 923 and 860 forms that are submitted both monthly and annually by geothermal operators. A discussion is also provided regarding the entities utilizing the information in the EIA reports, and how those entities can misinterpret the data being supplied by the operators. The intent of the paper is to inform the facility operators as the importance of the accuracy of the data that they provide, and the implications of not providing the correct information.

  16. Lumiram Electric: Proposed Penalty (2010-CE-1014)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Lumiram Electric Corporation failed to certify a variety of incandescent reflector lamps as compliant with the applicable energy conservation standards.

  17. Lumiram Electric: Order (2010-CE-1014)

    Broader source: Energy.gov [DOE]

    DOE issued an Order and entered into a Compromise Agreement with Lumiram Electric Corporation after finding Lumiram Electric had failed to certify that certain models of incandescent reflector lamps comply with the applicable energy conservation standards.

  18. Lighting Choices - White Background | Department of Energy

    Energy Savers [EERE]

    Choices - White Background Image icon All of these lightbulbs-CFLs, LEDs, and energy-saving incandescents-meet the new energy standards that take effect from 2012-2014. More...

  19. Lighting Choices to Save You Money Banner | Department of Energy

    Energy Savers [EERE]

    to Save You Money Banner Lighting Choices to Save You Money Banner All of these lightbulbs-CFLs, LEDs, and energy-saving incandescents-meet the new energy standards that take...

  20. New Lighting Facts Label: Takes the Guess Work Out of Shopping...

    Office of Environmental Management (EM)

    With new lighting standards taking effect this year, now's a great time switch to energy-saving incandescent, CFL, and LED light bulbs, which are available in most hardware and...

  1. Aero-Tech: Proposed Penalty (2010-CE-1012)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Aero-Tech Light Bulb Co. failed to certify a variety of incandescent reflector lamps as compliant with the applicable energy conservation standards.

  2. DuraLamp USA: Order (2010-CE-0912)

    Broader source: Energy.gov [DOE]

    DOE ordered DuraLamp USA, Inc. to pay a $2,500 civil penalty after finding DuraLamp USA had failed to certify that model PAR 30, an incandescent reflector lamp, complies with the applicable energy conservation standards.

  3. International Standards in Forensic DNA and

    E-Print Network [OSTI]

    documentary (technical) standards physical (measurement) standards Certified reference material to aidInternational Standards in Forensic DNA and Recent Forensic Science Activities in the United States John M. Butler, Ph.D. National Institute of Standards and Technology NIST Fellow & Special Assistant

  4. Title 24, Part 6 2013 Standards

    E-Print Network [OSTI]

    California at Davis, University of

    -rulemaking industry meetings · Workshops on proposed standards · Notice of Proposed Action and "45-day language 24 2013 Standards Convened more than 45 Industry stakeholder groups over the last year to inform themTitle 24, Part 6 2013 Standards 2013 Building Standards Update Mazi Shirakh, PE Martha Brook, PE

  5. Fast Factoring of Integers

    E-Print Network [OSTI]

    Gordon Chalmers

    2005-09-20

    An algorithm is given to factor an integer with $N$ digits in $\\ln^m N$ steps, with $m$ approximately 4 or 5. Textbook quadratic sieve methods are exponentially slower. An improvement with the aid of an a particular function would provide a further exponential speedup.

  6. Matrix Factorization and Matrix Concentration

    E-Print Network [OSTI]

    Mackey, Lester

    2012-01-01

    PCA 3 Mixed Membership Matrix Factorization 3.15.2 Matrix concentration3.3 Mixed Membership Matrix Factorization . . . 3.4

  7. Setting the Standard for Industrial Energy Efficiency

    SciTech Connect (OSTI)

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2007-06-01

    Industrial motor-driven systems use more than 2194 billionkWh annually on a global basis and offer one of the largest opportunitiesfor energy savings.1 The International Energy Agency estimates thatoptimization of motor driven systems could reduce global electricitydemand by 7 percent through the application of commercially availabletechnologies and using well-tested engineering practices. Yet manyindustrial firms remain either unaware of or unable to achieve theseenergy savings. The same factors that make it so challenging to achieveand sustain energy efficiency in motor-driven systems (complexity,frequent changes) apply to the production processes that they support.Yet production processes typically operate within a narrow band ofacceptable performance. These processes are frequently incorporated intoISO 9000/14000 quality and environmental management systems, whichrequire regular, independent audits to maintain ISO certification, anattractive value for international trade. It is our contention that acritical step in achieving and sustaining energy efficiency ofmotor-driven systems specifically, and industrial energy efficiencygenerally, is the adoption of a corporate energy management standard thatis consistent with current industrial quality and environmentalmanagement systems such as ISO. Several energy management standardscurrently exist (US, Denmark, Ireland, Sweden) and specifications(Germany, Netherlands) others are planned (China, Spain, Brazil, Korea).This paper presents the current status of energy management standardsdevelopment internationally, including an analysis of their sharedfeatures and differences, in terms of content, promulgation, andimplementation. The purpose of the analysis is to describe the currentstate of "best practices" for this emerging area of energy efficiencypolicymaking and tosuggest next steps toward the creation of a trulyinternational energy management standard that is consistent with the ISOprinciples of measurement, documentation, and continuousimprovement.

  8. Physics Beyond the Standard Model

    E-Print Network [OSTI]

    Howard Baer

    2009-08-19

    I present a brief overview of some exciting possibilities for physics Beyond the Standard Model. I include short discussions of neutrino physics, the strong CP problem and axions, GUTs, large and warped extra dimensions, Little Higgs models and supersymmetry. The chances appear excellent that in the next few years-- as the LHC era gets underway-- data from a bevy of experiments will point the way to a new paradigm for the laws of physics as we know them.

  9. DOE limited standard: Operations assessments

    SciTech Connect (OSTI)

    NONE

    1996-05-01

    Purpose of this standard is to provide DOE Field Element assessors with a guide for conducting operations assessments, and provide DOE Field Element managers with the criteria of the EM Operations Assessment Program. Sections 6.1 to 6.21 provide examples of how to assess specific areas; the general techniques of operations assessments (Section 5) may be applied to other areas of health and safety (e.g. fire protection, criticality safety, quality assurance, occupational safety, etc.).

  10. Furnace Standard Analysis Discussion Document

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015ExecutiveFluorescentDanKathyEnergydetailsof EnergyStandard *

  11. Speaker and Expression Factorization for Audiobook Data: Expressiveness and Transplantation

    E-Print Network [OSTI]

    Chen, Langzhou; Braunschweiler, Norbert; Gales, Mark J. F.

    2014-12-23

    the problem mentioned above, the factorization techniques were adopted to factorize a complex acoustic condition into several independent factors, i.e. ?(s,e) =?(s)S ? ?(e)E (2) where ?(s)S and ? (e) E are the independent transforms for speaker... was created representing the expressive infor- mation in an utterance. The feature vector includes various expression related features, e.g. mean of F0, voicing probabil- ity (pv), local jitter and shimmer, logarithmic HNR, standard deviation of F0 and mean...

  12. Twisted mass QCD for the pion electromagnetic form factor

    E-Print Network [OSTI]

    Abdou M. Abdel-Rehim; Randy Lewis

    2004-10-27

    The pion form factor is computed using quenched twisted mass QCD and the GMRES-DR matrix inverter. The momentum averaging procedure of Frezzotti and Rossi is used to remove leading lattice spacing artifacts, and numerical results for the form factor show the expected improvement with respect to the standard Wilson action. Although some matrix inverters are known to fail when applied to twisted mass QCD, GMRES-DR is found to be a viable and powerful option. Results obtained for the pion form factor are consistent with the published results from other O(a) improved actions and are also consistent with the available experimental data.

  13. Deuteron Form Factor

    SciTech Connect (OSTI)

    Farrar, G.R.; Huleihel, K.; Zhang, H. (Department of Physics and Astronomy, Rutgers University, Piscataway, New Jersey 08855 (United States))

    1995-01-30

    We obtain the perturbative QCD (PQCD) prediction for the leading twist deuteron form factor, treated as a pair of nucleons in nonrelativistic bound state. It is [lt]10[sup [minus]3] times experiment at [ital Q][sup 2]=4 GeV[sup 2], suggesting that PQCD is not relevant to the deuteron form factor at present values of [ital Q][sup 2], or that non-nucleon (e.g., hidden color'') degrees of freedom must be included for a correct description of the deuteron. The tree-level amplitude [similar to][ital eg][sup 10] and is the sum of several 10[sup 6] Feynman diagrams, making it an interesting case study in the behavior of perturbation theory.

  14. Journal Information Journal Impact Factor

    E-Print Network [OSTI]

    Krejcí, Pavel

    Journal Information Journal Impact Factor 5-Year Journal Impact Factor Journal Self Cites Journal Immediacy Index Journal Cited Half-Life 2014 JCR Science Edition Journal: CZECHOSLOVAK MATHEMATICAL JOURNAL Mark Journal Title ISSN Total Cites Impact Factor 5-Year Impact Factor Immediacy Index Citable Items

  15. Journal Information Journal Impact Factor

    E-Print Network [OSTI]

    Krejcí, Pavel

    Journal Information Journal Impact Factor 5-Year Journal Impact Factor Journal Self Cites Journal Immediacy Index Journal Cited Half-Life 2012 JCR Science Edition Journal: CZECHOSLOVAK MATHEMATICAL JOURNAL Mark Journal Title ISSN Total Cites Impact Factor 5-Year Impact Factor Immediacy Index Citable Items

  16. 1998 federal technical standards workshop: Proceedings

    SciTech Connect (OSTI)

    1998-10-01

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  17. Standards & Testing NIST has a long history of advancing standards and

    E-Print Network [OSTI]

    industry health IT standards and the development of standards needed for the future, such as those provides technical expertise and leverages industry-led, consensus-based standards developmentStandards & Testing NIST has a long history of advancing standards and the use of technology

  18. Cost Estimating, Analysis, and Standardization

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1984-11-02

    To establish policy and responsibilities for: (a) developing and reviewing project cost estimates; (b) preparing independent cost estimates and analysis; (c) standardizing cost estimating procedures; and (d) improving overall cost estimating and analytical techniques, cost data bases, cost and economic escalation models, and cost estimating systems. Cancels DOE O 5700.2B, dated 8-5-1983; DOE O 5700.8, dated 5-27-1981; and HQ 1130.1A, dated 12-30-1981. Canceled by DOE O 5700.2D, dated 6-12-1992

  19. Beyond the Standard Model Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O OLaura| National2.11DESERTWaterSharingBeyond the Standard

  20. Standard Terms and Conditions | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque|SensitiveApril 2, 2014ApplicationLanceStaff DeputyStandard Terms

  1. NREL: Photovoltaics Research - Standards Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial Toolkit TheCompetitiveMatt PageEnergyStandards Development

  2. Clear Standards | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar EnergyLawler,Coal Technologies Place:Standards Jump to: navigation, search

  3. State Clean Energy Practices: Renewable Portfolio Standards

    SciTech Connect (OSTI)

    Hurlbut, D.

    2008-07-01

    The State Clean Energy Policies Analysis (SCEPA) project is supported by the Weatherization and Intergovernmental Program within the Department of Energy's Office of Energy Efficiency and Renewable Energy. This project seeks to quantify the impacts of existing state policies, and to identify crucial policy attributes and their potential applicability to other states. The goal is to assist states in determining which clean energy policies or policy portfolios will best accomplish their environmental, economic, and security goals. For example, a renewable portfolio standard (RPS) mandates an increase in the use of wind, solar, biomass, and other alternatives to fossil and nuclear electric generation. This paper provides a summary of the policy objectives that commonly drive the establishment of an RPS, the key issues that states have encountered in implementing an RPS, and the strategies that some of the leading states have followed to address implementation challenges. The factors that help an RPS function best generally have been explored in other analyses. This study complements others by comparing empirical outcomes, and identifying the policies that appear to have the greatest impact on results.

  4. Combined factor analysis of the WISC-III and CMS: does the resulting factor structure discriminate among children with and without clinical disorders? 

    E-Print Network [OSTI]

    Siekierski, Becky Mayes

    2006-10-30

    -III/CMS standardization sample................................................................................................ 35 3 Demographic data of research sample from MAPS study................ 36 4 WISC-III index and IQ score composition... otherwise indicated, consisted of the following: the one-factor model is regarded as essentially the composition of the Full Scale IQ; the two-factor 11 model is based on the verbal and performance dichotomy; the three-factor model consists...

  5. Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 1, 0.01 Foundations and footings

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are given for footings - spread/strip/grade beams; foundation walls; foundation dampproofing/waterproofing; excavation/backfill/ and piles & caissons.

  6. Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 11, 0.11 Specialty systems

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are presented for canopies; loading dock systems; tanks; domes (bulk storage, metal framing); louvers & vents; access floors; integrated ceilings; and mezzanine structures.

  7. Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 6, 0.06 Interior construction

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are presented for conventional and specialty partitions, toilet partitions & accessories, interior doors, paint finishes/coatings/ wall covering systems; floor finishing systems; and ceiling systems.

  8. Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 12, 0.12 Sitework

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are given for utility distribution systems, central heating, central cooling, electrical, utility support structures, paving roadways/walkways, and tunnels.

  9. Social Responsibility Standards: A Quick Glimpse Although efforts to establish measurements, standards and certifications related to

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    to establish measurements, standards and certifications related to various areas of social: ISO Standard 24000--Social Responsibility: The International Organization't be a certification standard. FOOD LABELING Fairtrade Labelling Organizations

  10. Information Technology: American National Standard for

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format Publication 500-245 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange of Fingerprint, Facial, & Scar Mark & Tattoo (SMT) Information Sponsored by Information Technology

  11. JOHNS HOPKINS UNIVERSITY COST ACCOUNTING STANDARDS BOARD

    E-Print Network [OSTI]

    JOHNS HOPKINS UNIVERSITY COST ACCOUNTING STANDARDS BOARD DISCLOSURE STATEMENT FOR EDUCATIONAL INSTITUTIONS CASB DS-2 March 23, 2010 #12;COST ACCOUNTING STANDARDS BOARD DISCLOSURE STATEMENT REQUIRED BY PUBLIC LAW 100-679 EDUCATIONAL INSTITUTIONS INDEX JOHNS HOPKINS UNIVERISTY GENERAL INSTRUCTIONS

  12. A Pragmatic Standard of Legal Validity 

    E-Print Network [OSTI]

    Tyler, John

    2012-07-16

    American jurisprudence currently applies two incompatible validity standards to determine which laws are enforceable. The natural law tradition evaluates validity by an uncertain standard of divine law, and its methodology relies on contradictory...

  13. Energy Efficiency Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The Montana Department of Labor must also develop and adopt high performance building standards, along with the Montana university system and other state agencies. These standards must take into...

  14. Late standardization and technological catch-up

    E-Print Network [OSTI]

    Ratanawaraha, Apiwat, 1972-

    2006-01-01

    In this study, we examine the process of "late standardization," in which latecomers engage in standards activities in order to move towards and beyond the technological frontier. Based on case studies of latecomers in the ...

  15. Information Technology: American National Standard for Information

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format 500-275 Information Technology: American National Standard for Information Systems-- Data Format Coleman, and Patrice Yuh, Editors Sponsored by Information Access Division Information Technology

  16. New and revised standards for coke production

    SciTech Connect (OSTI)

    G.A. Kotsyuba; M.I. Alpatov; Y.G. Shapoval [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

    2009-07-15

    The need for new and revised standards for coke production in Ukraine and Russia is outlined. Such standards should address improvements in plant operation, working conditions, environmental protection, energy conservation, fire and explosion safety, and economic indices.

  17. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01

    National Standards Institute (ANSI), it has received littleversion of the Georgia Tech/ANSI energy management standard.developed by Georgia Tech/ANSI, was based on ISO management

  18. Measurements and Standards for Thermoelectric Materials

    E-Print Network [OSTI]

    Measurements and Standards for Thermoelectric Materials CERAMICS Our goal is to develop standard, electrical conductivity, thermal conductivity) for thin film and bulk thermoelectric materials to enable approach will facilitate comparison of thermoelectric data between leading laboratories, and accelerate

  19. The role of Health Impact Assessment in the setting of air quality standards: An Australian perspective

    SciTech Connect (OSTI)

    Spickett, Jeffery; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia ; Katscherian, Dianne; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia ; Harris, Patrick

    2013-11-15

    The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia. To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards. Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of a formalised HIA process for setting air quality standards in Australia. The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality. In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous. -- Highlights: • Health Impact Assessment framework has been applied to a policy development process. • HIA process was evaluated for application in air quality standard setting. • Advantages of HIA in the air quality standard setting process are demonstrated.

  20. The Building Standard (Scotland) Amendment Regulations 1964 

    E-Print Network [OSTI]

    Noble, Michael

    1964-01-01

    STATUTORY INSTRUMENTS 1964 No. 802 (S. 50) BUILDING AND BUILDINGS The Building Standards (Scotland) Amendment Regulations 1964

  1. EPA's Renewable Fuels Standard Web page

    SciTech Connect (OSTI)

    2011-12-30

    The Renewable Fuel Standard (RFS) program regulations were developed in collaboration with refiners, renewable fuel producers, and many other stakeholders.

  2. ANS Standards to Support DOE NPH Design

    Office of Energy Efficiency and Renewable Energy (EERE)

    ANS Standards to Support DOE NPH Design DOE NPH Workshop, Germantown, MD Carl Mazzola, CFS October 22, 2014

  3. Webtrends Archives by Fiscal Year — Communication Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    From the EERE Web Statistics Archive: Corporate sites, Webtrends archives for the Communication Standards site by fiscal year.

  4. 1996 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1996-07-01

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  5. Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems

    SciTech Connect (OSTI)

    Sherman, Max H.; Walker, Iain S.

    2011-04-01

    Existing ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide minimum ventilation, with time-based intermittent operation as an option. This requirement ignores several factors and concerns including: other equipment such as household exhaust fans that might incidentally provide ventilation, negative impacts of ventilation when outdoor pollutant levels are high, the importance of minimizing energy use particularly during times of peak electricity demand, and how the energy used to condition air as part of ventilation system operation changes with outdoor conditions. Dynamic control of ventilation systems can provide ventilation equivalent to or better than what is required by standards while minimizing energy costs and can also add value by shifting load during peak times and reducing intake of outdoor air contaminants. This article describes the logic that enables dynamic control of whole-house ventilation systems to meet the intent of ventilation standards and demonstrates the dynamic ventilation system control concept through simulations and field tests of the Residential Integrated Ventilation-Energy Controller (RIVEC).

  6. Nucleon and $?$ elastic and transition form factors

    E-Print Network [OSTI]

    Jorge Segovia; Ian C. Cloet; Craig D. Roberts; Sebastian M. Schmidt

    2014-09-03

    We compute nucleon and Delta elastic and transition form factors, and compare predictions made using a framework built upon a Faddeev equation kernel and interaction vertices that possess QCD-like momentum dependence with results obtained using a vector-vector contact-interaction. The comparison emphasises that experiment is sensitive to the momentum dependence of the running couplings and masses in the strong interaction sector of the Standard Model and highlights that the key to describing hadron properties is a veracious expression of dynamical chiral symmetry breaking in the bound-state problem. Amongst the results we describe, the following are of particular interest: $G_E^p(Q^2)/G_M^p(Q^2)$ possesses a zero at $Q^2=9.5GeV^2$; any change in the interaction which shifts a zero in the proton ratio to larger $Q^2$ relocates a zero in $G_E^n(Q^2)/G_M^n(Q^2)$ to smaller $Q^2$; and there is likely a value of momentum transfer above which $G_E^n>G_E^p$. Regarding the $\\Delta(1232)$-baryon, we find that, inter alia: the electric monopole form factor exhibits a zero; the electric quadrupole form factor is negative, large in magnitude, and sensitive to the nature and strength of correlations in the $\\Delta(1232)$ Faddeev amplitude; and the magnetic octupole form factor is negative so long as rest-frame P- and D-wave correlations are included. In connection with the N-to-Delta transition, the momentum-dependence of the magnetic transition form factor, $G_M^\\ast$, matches that of $G_M^n$ once the momentum transfer is high enough to pierce the meson-cloud; and the electric quadrupole ratio is a keen measure of diquark and orbital angular momentum correlations.

  7. Multi-objective fuel policies: Renewable fuel standards versus Fuel greenhouse gas intensity standards

    E-Print Network [OSTI]

    Rajagopal, Deepak

    2010-01-01

    Gas Reductions under Low Carbon Fuel Standards? Americanto Implement the Low Carbon Fuel Standard, Volume I Sta?Paper Series Multi-objective fuel policies: Renewable fuel

  8. Living up to standards Margaret King

    E-Print Network [OSTI]

    to record my thanks to Nigel Bevan, technical editor of the ISO standards discussed for much interestingLiving up to standards Margaret King TIM/ISSCO ETI University of Geneva Margaret reusable" by arguing that a set of ISO standards developed for the evaluation of software in general

  9. NISTIR 7977 NIST Cryptographic Standards and

    E-Print Network [OSTI]

    by providing technical leadership for the Nation's measurement and standards infrastructure. ITL develops tests of management, administrative, technical, and physical standards and guidelines for the cost-effective securityNISTIR 7977 NIST Cryptographic Standards and Guidelines Development Process (Second Draft

  10. Improving the Security of Cryptographic Protocol Standards

    E-Print Network [OSTI]

    Basin, David

    for their implementation. This generality is enabled by standards and technical documents such as Request for CommentsImproving the Security of Cryptographic Protocol Standards David Basin Cas Cremers Kunihiko Miyazaki Sasa Radomirovic Dai Watanabe May 1, 2014 Keywords: Standards, Network Protocols, Security

  11. NIST Cryptographic Standards and Guidelines Development Process

    E-Print Network [OSTI]

    Rivest, Ronald L.

    as technical experts in the review of National Institute of Standards and Technology (NIST) cryptographicNIST Cryptographic Standards and Guidelines Development Process Report and Recommendations of the Visiting Committee on Advanced Technology of the National Institute of Standards and Technology July 2014

  12. NIST Standards in Trade Workshops Increase

    E-Print Network [OSTI]

    NIST Standards in Trade Workshops Increase Trade Opportunities and Exports for U.S. Industry Since 1995, U.S. industry has looked to the NIST Standards in Trade (SIT) Workshop Program to provide opportunities for cooperation on topics related to standards, conformity assessment and trade that are important

  13. A new standard pulsar magnetosphere

    SciTech Connect (OSTI)

    Contopoulos, Ioannis [Research Center for Astronomy and Applied Mathematics, Academy of Athens, Athens 11527 (Greece); Kalapotharakos, Constantinos [University of Maryland, College Park (UMDCP/CRESST), College Park, MD 20742 (United States); Kazanas, Demosthenes, E-mail: icontop@academyofathens.gr [Astrophysics Science Division, NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2014-01-20

    In view of recent efforts to probe the physical conditions in the pulsar current sheet, we revisit the standard solution that describes the main elements of the ideal force-free pulsar magnetosphere. The simple physical requirement that the electric current contained in the current layer consists of the local electric charge moving outward at close to the speed of light yields a new solution for the pulsar magnetosphere everywhere that is ideal force-free except in the current layer. The main elements of the new solution are as follows: (1) the pulsar spindown rate of the aligned rotator is 23% larger than that of the orthogonal vacuum rotator; (2) only 60% of the magnetic flux that crosses the light cylinder opens up to infinity; (3) the electric current closes along the other 40%, which gradually converges to the equator; (4) this transfers 40% of the total pulsar spindown energy flux in the equatorial current sheet, which is then dissipated in the acceleration of particles and in high-energy electromagnetic radiation; and (5) there is no separatrix current layer. Our solution is a minimum free-parameter solution in that the equatorial current layer is electrostatically supported against collapse and thus does not require a thermal particle population. In this respect, it is one more step toward the development of a new standard solution. We discuss the implications for intermittent pulsars and long-duration gamma-ray bursts. We conclude that the physical conditions in the equatorial current layer determine the global structure of the pulsar magnetosphere.

  14. International Experience in Standards and Labeling Programs for Rice Cookers

    SciTech Connect (OSTI)

    Zhou, Nan; Zheng, Nina

    2008-05-01

    China has had an active program on energy efficiency standards for household appliances since the mid-1990s. Rice cooker is among the first to be subject to such mandatory regulation, since it is one of the most prevalent electric appliances in Chinese households. Since first introduced in 1989, the minimum energy efficiency standard for rice cookers has not been revised. Therefore, the potential for energy saving is considerable. Initial analysis from CNIS indicates that potential carbon savings is likely to reach 7.6 million tons of CO2 by the 10th year of the standard implementation. Since September 2007, CNIS has been working with various groups to develop the new standard for rice cookers. With The Energy Foundation's support, LBNL has assisted CNIS in the revision of the minimum energy efficiency standard for rice cookers that is expected to be effective in 2009. Specifically, work has been in the following areas: assistance in developing consumer survey on usage pattern of rice cookers, review of international standards, review of international test procedures, comparison of the international standards and test procedures, and assessment of technical options of reducing energy use. This report particularly summarizes the findings of reviewing international standards and technical options of reducing energy consumption. The report consists of an overview of rice cooker standards and labeling programs and testing procedures in Hong Kong, South Korea, Japan and Thailand, and Japan's case study in developing energy efficiency rice cooker technologies and rice cooker efficiency programs. The results from the analysis can be summarized as the follows: Hong Kong has a Voluntary Energy Efficiency Labeling scheme for electric rice cookers initiated in 2001, with revision implemented in 2007; South Korea has both MEPS and Mandatory Energy Efficiency Label targeting the same category of rice cookers as Hong Kong; Thailand's voluntary endorsement labeling program is similar to Hong Kong in program design but has 5 efficiency grades; Japan's program is distinct in its adoption of the 'Top Runner' approach, in which, the future efficiency standards is set based on the efficiency levels of the most efficient product in the current domestic market. Although the standards are voluntary, penalties can still be evoked if the average efficiency target is not met. Both Hong Kong and South Korea's tests involve pouring water into the inner pot equal to 80% of its rated volume; however, white rice is used as a load for its tests in Hong Kong whereas no rice is used for tests in South Korea. In Japan's case, water level specified by the manufactures is used and milled rice is used as a load only partially in the tests. Moreover, Japan does not conduct heat efficiency test but its energy consumption measurements tests are much more complex, with 4 different tests are conducted to determine the annual average energy consumption. Hong Kong and Thailand both set Minimum Allowable Heat Efficiency for different rated wattages. The energy efficiency requirements are identical except that the minimum heat efficiency in Thailand is 1 percentage point higher for all rated power categories. In South Korea, MEPS and label's energy efficiency grades are determined by the rice cooker's Rated Energy Efficiency for induction, non-induction, pressure, nonpressure rice cookers. Japan's target standard values are set for electromagnetic induction heating products and non-electromagnetic induction heating products by different size of rice cookers. Specific formulas are used by type and size depending on the mass of water evaporation of the rice cookers. Japan has been the leading country in technology development of various types of rice cookers, and developed concrete energy efficiency standards for rice cookers. However, as consumers in Japan emphasize the deliciousness of cooked rice over other factors, many types of models were developed to improve the taste of cooked rice. Nonetheless, the efficiency of electromagnetic induction heating (IH) rice cook

  15. Tiled QR factorization algorithms

    E-Print Network [OSTI]

    Bouwmeester, Henricus; Langou, Julien; Robert, Yves

    2011-01-01

    This work revisits existing algorithms for the QR factorization of rectangular matrices composed of p-by-q tiles, where p >= q. Within this framework, we study the critical paths and performance of algorithms such as Sameh and Kuck, Modi and Clarke, Greedy, and those found within PLASMA. Although neither Modi and Clarke nor Greedy is optimal, both are shown to be asymptotically optimal for all matrices of size p = q^2 f(q), where f is any function such that \\lim_{+\\infty} f= 0. This novel and important complexity result applies to all matrices where p and q are proportional, p = \\lambda q, with \\lambda >= 1, thereby encompassing many important situations in practice (least squares). We provide an extensive set of experiments that show the superiority of the new algorithms for tall matrices.

  16. National Agenda for Hydrogen Codes and Standards

    SciTech Connect (OSTI)

    Blake, C.

    2010-05-01

    This paper provides an overview of hydrogen codes and standards with an emphasis on the national effort supported and managed by the U.S. Department of Energy (DOE). With the help and cooperation of standards and model code development organizations, industry, and other interested parties, DOE has established a coordinated national agenda for hydrogen and fuel cell codes and standards. With the adoption of the Research, Development, and Demonstration Roadmap and with its implementation through the Codes and Standards Technical Team, DOE helps strengthen the scientific basis for requirements incorporated in codes and standards that, in turn, will facilitate international market receptivity for hydrogen and fuel cell technologies.

  17. Electrical and Production Load Factors 

    E-Print Network [OSTI]

    Sen, T.; Heffington, W. M.

    2009-01-01

    factors and operating hours of small and medium-sized industrial plants are analyzed to classify shift-work patterns and develop energy conservation diagnostic tools. This paper discusses two types of electric load factors for each shift... The purpose of this paper is to analyze operating hours of small and medium-sized manufacturing plants in the United States and develop ranges of load factors for use as diagnostic tools for effective energy management. Load factor is defined...

  18. 1993 DOE technical standards managers workshop: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1993-12-31

    This workshop is focused on the benefits of the DOE technical standards program, which is focused toward the preferred use of non-Government standards for DOE activities and the development of DOE technical standards when non-Government standards are not available or are inappropriate. One goal of the program is to replace redundant site-specific standards with more universally accepted documents that have been scrutinized by experts. This replacement is discussed at the workshop along with the problems encountered and solutions found. The workshop provided an opportunity for geographically dispersed people to meet and advance their standards knowledge and efforts to support the program. Safety issues have been the driving force behind the program to date. Several companies offer products and services that support the development, processing, and retrieval of standards. This document mostly comprise vugraphs.

  19. voluntary product standard ps 1-07 National Institute of Standards and Technology

    E-Print Network [OSTI]

    and review as is required to assure the technical soundness of the standard, and seek satisfactory adjustment initiate and participate in the development of the standards, provide technical or other counselStructural Plywood voluntary product standard ps 1-07 National Institute of Standards

  20. Standards for Serials Metadata and for Terms of Availability 1 Descriptive Standards for Serials Metadata and

    E-Print Network [OSTI]

    Carr, Leslie

    by UKOLN David Martin Mark Bide Book Industry Communication AUGUST 1997 #12;Standards for Serials MetadataStandards for Serials Metadata and for Terms of Availability 1 Descriptive Standards for Serials Metadata and Standards for Terms of Availability Metadata Two related eLib Supporting Studies commissioned

  1. Economical standard quantum process tomography

    E-Print Network [OSTI]

    Xiaohua Wu; Ke Xu

    2011-05-12

    Recently, Bendersky \\emph{et al.} developed a method to complete the task of characterizing an arbitrary $\\chi$ matrix element in a scalable way, Phys. Rev. Lett. Vol. \\textbf{100}, 190403(2008), where an auxiliary system was needed. In present work, we shall show that the same task can also be completed within the scheme of standard quantum process tomography (SQPT) where there is no requirement for ancilla. Our method depends on two observations: With the elaborately chosen operators basis, the SQPT may have an economical form where a single run of experiment, in which we measure the expectation value of a chosen operator in the outport of the quantum channel with a known input, is sufficient to characterize a selected $\\chi$ matrix element; With the progress recently achieved in quantum entanglement detection, we also find that the number of the experimental settings to realize the experiment for the selected $\\chi$ matrix element does not exceed 2N for the N-qubits system. For practice, our scheme can be applied for the cases where the controlled two-body interaction is neither available nor desirable.

  2. Vacuum Stability of Standard Model^{++}

    E-Print Network [OSTI]

    Anchordoqui, Luis A; Goldberg, Haim; Huang, Xing; Lust, Dieter; Taylor, Tomasz R; Vlcek, Brian

    2013-01-01

    The latest results of the ATLAS and CMS experiments point to a preferred narrow Higgs mass range (m_h \\simeq 124 - 126 GeV) in which the effective potential of the Standard Model (SM) develops a vacuum instability at a scale 10^{9} -10^{11} GeV, with the precise scale depending on the precise value of the top quark mass and the strong coupling constant. Motivated by this experimental situation, we present here a detailed investigation about the stability of the SM^{++} vacuum, which is characterized by a simple extension of the SM obtained by adding to the scalar sector a complex SU(2) singlet that has the quantum numbers of the right-handed neutrino, H", and to the gauge sector an U(1) that is broken by the vacuum expectation value of H". We derive the complete set of renormalization group equations at one loop. We then pursue a numerical study of the system to determine the triviality and vacuum stability bounds, using a scan of 10^4 random set of points to fix the initial conditions. We show that, if there...

  3. Stochastic volatility models with persistent latent factors: theory and its applications to asset prices 

    E-Print Network [OSTI]

    Lee, Hyoung Il

    2008-10-10

    filter. See, e.g., Tanizaki (1996) for a general introduction to the density-based Kalman fil- ter. The second approach applies the standard Bayesian procedure and estimates the unknown parameters and latent factor by their posterior means, which... transition and persistent la- tent factors. We argue that this model has advantages over theconventional stochastic model for the persistent volatility factor. Though the linear filtering is widely used in the state space model, the simulation result, as well...

  4. STANDARD OPERATING PROTOCOLS FOR DECOMMISSIONING

    SciTech Connect (OSTI)

    Foss, D. L.; Stevens, J. L.; Gerdeman, F. W.

    2002-02-25

    Decommissioning projects at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites are conducted under project-specific decision documents, which involve extensive preparation time, public comment periods, and regulatory approvals. Often, the decision documents must be initiated at least one year before commencing the decommissioning project, and they are expensive and time consuming to prepare. The Rocky Flats Environmental Technology Site (RFETS) is a former nuclear weapons production plant at which hazardous substances and wastes were released or disposed during operations. As a result of the releases, RFETS was placed on the National Priorities List in 1989, and is conducting cleanup activities under a federal facilities compliance agreement. Working closely with interested stakeholders and state and federal regulatory agencies, RFETS has developed and implemented an improved process for obtaining the approvals. The key to streamlining the approval process has been the development of sitewide decision documents called Rocky Flats Cleanup Agreement Standard Operating Protocols or ''RSOPs.'' RSOPs have broad applicability, and could be used instead of project-specific documents. Although no two decommissioning projects are exactly the same and they may vary widely in contamination and other hazards, the basic steps taken for cleanup are usually similar. Because of this, using RSOPs is more efficient than preparing a separate project-specific decision documents for each cleanup action. Over the Rocky Flats cleanup life cycle, using RSOPs has the potential to: (1) Save over 5 million dollars and 6 months on the site closure schedule; (2) Eliminate preparing one hundred and twenty project-specific decision documents; and (3) Eliminate writing seventy-five closure description documents for hazardous waste unit closure and corrective actions.

  5. Beyond the Cosmological Standard Model

    E-Print Network [OSTI]

    Austin Joyce; Bhuvnesh Jain; Justin Khoury; Mark Trodden

    2014-12-15

    After a decade and a half of research motivated by the accelerating universe, theory and experiment have a reached a certain level of maturity. The development of theoretical models beyond \\Lambda, or smooth dark energy, often called modified gravity, has led to broader insights into a path forward, and a host of observational and experimental tests have been developed. In this review we present the current state of the field and describe a framework for anticipating developments in the next decade. We identify the guiding principles for rigorous and consistent modifications of the standard model, and discuss the prospects for empirical tests. We begin by reviewing attempts to consistently modify Einstein gravity in the infrared, focusing on the notion that additional degrees of freedom introduced by the modification must screen themselves from local tests of gravity. We categorize screening mechanisms into three broad classes: mechanisms which become active in regions of high Newtonian potential, those in which first derivatives become important, and those for which second derivatives are important. Examples of the first class, such as f(R) gravity, employ the familiar chameleon or symmetron mechanisms, whereas examples of the last class are galileon and massive gravity theories, employing the Vainshtein mechanism. In each case, we describe the theories as effective theories. We describe experimental tests, summarizing laboratory and solar system tests and describing in some detail astrophysical and cosmological tests. We discuss future tests which will be sensitive to different signatures of new physics in the gravitational sector. Parts that are more relevant to theorists vs. observers/experimentalists are clearly indicated, in the hope that this will serve as a useful reference for both audiences, as well as helping those interested in bridging the gap between them.

  6. OSHA`s process safety management standard

    SciTech Connect (OSTI)

    Morelli, J.A.

    1994-12-31

    On February 24, 1992, OSHA published the final rule for its Process Safety Management Standard (PSM) mandated by the Clean Air Act Amendments of 1990. (see Federal Register 57 FR 6356-6417). This standard imposes several responsibilities upon employers whose processes can cause large accident releases that could result in processes can cause large accident releases that could result in catastrophes. In contrast to OSHA`s Hazard Communication standard which focuses on routine daily exposures to hazardous materials, the PSM Standard is concerned with processes whereby the use, storage, manufacturing, handling or on-site movement of highly hazardous chemicals which exceed threshold quantities, provides potential for a catastrophic release. The PSM Standard requires: a written program, plans, training, hazard analysis and compliance auditing. This paper outlines the provisions under this Standard pursuant to OSHA regulation 29 Code of Federal Regulation 1910.119.

  7. An alternative to the standard model

    E-Print Network [OSTI]

    Seungwon Baek; Pyungwon Ko; Wan-Il Park

    2013-10-23

    We present an extension of the standard model to dark sector with an unbroken local dark $U(1)_X$ symmetry. Including various singlet portal interactions provided by the standard model Higgs, right-handed neutrinos and kinetic mixing, we show that the model can address most of phenomenological issues (inflation, neutrino mass and mixing, baryon number asymmetry, dark matter, direct/indirect dark matter searches, some scale scale puzzles of the standard collisionless cold dark matter, vacuum stability of the standard model Higgs potential, dark radiation) and be regarded as an alternative to the standard model. The Higgs signal strength is equal to one as in the standard model for unbroken $U(1)_X$ case with a scalar dark matter, but it could be less than one independent of decay channels if the dark matter is a dark sector fermion or if $U(1)_X$ is spontaneously broken, because of a mixing with a new neutral scalar boson in the models.

  8. Various factors affect coiled tubing limits

    SciTech Connect (OSTI)

    Yang, Y.S.

    1996-01-15

    Safety and reliability remain the primary concerns in coiled tubing operations. Factors affecting safety and reliability include corrosion, flexural bending, internal (or external) pressure and tension (or compression), and mechanical damage due to improper use. Such limits as coiled tubing fatigue, collapse, and buckling need to be understood to avoid disaster. With increased use of coiled tubing, operators will gain more experience. But at the same time, with further research and development of coiled tubing, the manufacturing quality will be improved and fatigue, collapse, and buckling models will become more mature, and eventually standard specifications will be available. This paper reviews the uses of coiled tubing and current research on mechanical behavior of said tubing. It also discusses several models used to help predict fatigue and failure levels.

  9. Nuclear Physics and the New Standard Model

    SciTech Connect (OSTI)

    Ramsey-Musolf, Michael J. [Department of Physics, University of Wisconsin-Madison, Madison, WI 53706 (United States) and Kellogg Radiation Laboratory, California Institute of Technology, Pasadena, CA 91125 (United States)

    2010-08-04

    Nuclear physics studies of fundamental symmetries and neutrino properties have played a vital role in the development and confirmation of the Standard Model of fundamental interactions. With the advent of the CERN Large Hadron Collider, experiments at the high energy frontier promise exciting discoveries about the larger framework in which the Standard Model lies. In this talk, I discuss the complementary opportunities for probing the 'new Standard Model' with nuclear physics experiments at the low-energy high precision frontier.

  10. Codes and Standards Technical Team Roadmap

    SciTech Connect (OSTI)

    2013-06-01

    The Hydrogen Codes and Standards Tech Team (CSTT) mission is to enable and facilitate the appropriate research, development, & demonstration (RD&D) for the development of safe, performance-based defensible technical codes and standards that support the technology readiness and are appropriate for widespread consumer use of fuel cells and hydrogen-based technologies with commercialization by 2020. Therefore, it is important that the necessary codes and standards be in place no later than 2015.

  11. Sharyland Utilities- Commercial Standard Offer Program (Texas)

    Broader source: Energy.gov [DOE]

    Sharyland Utilities offers the Residential and "Hard-to-Reach" Standard Offer Programs, which encourage residential customers to pursue energy saving measures and equipment upgrades in their homes....

  12. Gene Calling Standards (GSC8 Meeting)

    ScienceCinema (OSTI)

    Kyrpides, Nikos [Genome Biology Program, DOE JGI

    2011-04-28

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Nikos Kyrpides of the DOE Joint Genome Institute discusses gene calling standards at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 10, 2009.

  13. Technical Standards, Safety Analysis Toolbox Codes - November...

    Broader source: Energy.gov (indexed) [DOE]

    report, Selection of Computer Codes for DOE Safety Analysis Applications, (August, 2002). Technical Standards, Safety Analysis Toolbox Codes More Documents & Publications DOE G...

  14. New Energy Efficiency Standards for Commercial Refrigeration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Commercial Refrigeration Equipment to Cut Businesses' Energy Bills and Carbon Pollution New Energy Efficiency Standards for Commercial Refrigeration Equipment to Cut...

  15. Earthjustice, Appliance Standards Awareness Project, Natural...

    Energy Savers [EERE]

    Council - Comments in response to DOE solicitation of views on the implementation of test procedure waivers for large capacity clothes washers Earthjustice, Appliance Standards...

  16. Standards for Protection Against Radiation (Michigan)

    Broader source: Energy.gov [DOE]

    This rule establishes standards for protection against radiation hazards. In addition to complying with requirements set forth, every reasonable effort should be made to maintain radiation levels...

  17. Energy Conservation Standards Rulemaking Peer Review Report ...

    Energy Savers [EERE]

    Review Report ISSUANCE 2015-06-30: Energy Conservation Program: Energy Conservation Standards for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps, Final Rule...

  18. Control Systems Security Standards: Accomplishments And Impacts...

    Broader source: Energy.gov (indexed) [DOE]

    that need to be made toward meeting the priority strategies defined in the DOEDHS Roadmap to Secure Control Systems in the Energy Sector. Control Systems Security Standards:...

  19. Fuel Cells and Renewable Portfolio Standards

    Broader source: Energy.gov [DOE]

    Presented at the Clean Energy States Alliance and U.S. Department of Energy Webinar: Fuel Cells and Renewable Portfolio Standards, June 9, 2011.

  20. HANFORD MISSION SUPPORT CONTRACT Hanford Integrated Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * Hanford Site Hoisting and Rigging Manual, DOE-LR-92-36, Revision 1 * Hanford Site LockoutTagout Procedure, DOE-0336 * Hanford Standardized HAZWOPER Training Program...

  1. New Energy Efficiency Standards for Commercial Refrigeration...

    Office of Environmental Management (EM)

    NREL. Historic Energy Efficiency Rules Would Save Consumers Money and Cut Carbon Emissions New Energy Efficiency Standards to Help Americans Save Money by Saving Energy, Cut...

  2. Implementation Guide of Medical Standards for Firefighters

    Broader source: Energy.gov [DOE]

    These guidelines were prepared to assist the DOE contractor site occupational medical programs in developing NFPA-based firefighter standards that comply with the ADA.

  3. DOE Approved Technical Standards | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    04232001 DOE-STD-3028-2000 Criteria for Packaging and Storing Uranium-233-Bearing Materials This Standard establishes the criteria for the packaging and safe storage of...

  4. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01

    Netherlands has an Energy Management System, not a standard,LTAs and must use the Energy Management System. The 150 mostinvolvement. The energy management system (introduced as a

  5. Webinar: Introduction to SAE Hydrogen Fueling Standardization

    Broader source: Energy.gov [DOE]

    Video recording and text version of the Fuel Cell Technologies Office webinar titled "Introduction to SAE Hydrogen Fueling Standardization," originally presented on September 11, 2014.

  6. Denton Municipal Electric- Standard Offer Rebate Program

    Broader source: Energy.gov [DOE]

    Within the GreenSense program, Denton Municipal Electric's Standard Offer Program provides rebates to large commercial and industrial customers for lighting retrofits, HVAC upgrades and motor...

  7. Defining a Standard Metric for Electricity Savings

    E-Print Network [OSTI]

    Koomey, Jonathan

    2009-01-01

    1991. The Potential for Electricity Efficiency Improvementswww.eia.doe.gov/cneaf/electricity/page/eia860.html>. FigureA STANDARD METRIC FOR ELECTRICITY SAVINGS Jonathan Koomey*,

  8. Energy Management Standards (EnMS)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thailand, Korea) * Energy management standards are under development in China, Spain, Brazil, and European Union * ISO has initiated work on an international energy management...

  9. IEC 61850 Industrial Communication Standards under Test

    E-Print Network [OSTI]

    Tilaro, F M; Gonzalez-Berges, M

    2014-01-01

    IEC-61850, as part of the International Electrotechnical Commission's (IEC) Technical Committee 57 (TC57), defines an international and standardized methodology to design electric power automation substations.

  10. New Lighting Standards Began in 2012 | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electricity & Fuel Lighting New Lighting Standards Began in 2012 New Lighting Standards Began in 2012 New Lighting Standards Began in 2012 Common lightbulbs now sold in the...

  11. Non-Government Standards Committee Activity and Participating...

    Energy Savers [EERE]

    Personnel Non-Government Standards Committee Activity and Participating Personnel DOE Technical Standards Ownership APPENDIX B: Non-Government Standards (NGS) Committee...

  12. Legal and technical standards in digital rights management technology

    E-Print Network [OSTI]

    Burk, DL

    2005-01-01

    18, 1124. LEGAL AND TECHNICAL STANDARDS reinterpretation99 (1995). LEGAL AND TECHNICAL STANDARDS attempting self-at 1171-73. LEGAL AND TECHNICAL STANDARDS Blizzard sued the

  13. TMD theory, factorization and evolution

    E-Print Network [OSTI]

    John Collins

    2013-07-10

    The concepts and methods of factorization using transverse-momentum-dependent (TMD) parton densities and/or fragmentation functions are summarized.

  14. Filling factors and Braid group

    E-Print Network [OSTI]

    Wellington Cruz

    1998-02-25

    We extract the Braid group structure of a recently derived hierarchy scheme for the filling factors proposed by us which related the Hausdorff dimension, $h$, to statistics, $\

  15. DOE-TSPP-10, Conversion of DOE Technical Standards to Non-Government Standards- August 1, 2000

    Broader source: Energy.gov [DOE]

    This procedure provides guidance on the conversion of DOE Technical Standards to Voluntary Consensus Standards (VCSs), also referred to as non-Government standards.

  16. DOE-TSPP-10, Conversion of DOE Technical Standards to Non-Government Standards- July 1, 2009

    Broader source: Energy.gov [DOE]

    This procedure provides guidance on the conversion of DOE Technical Standards to Voluntary Consensus Standards (VCSs), also referred to as non-Government standards.

  17. National Institute of Standards and Technology

    E-Print Network [OSTI]

    National Institute of Standards and Technology NIST Campus Gaithersburg, MD NET ZERO ENERGY Campus Gaithersburg, MD NET ZERO ENERGY RESIDENTIAL TEST FACILITY PROJECT: CONSULTANT: SHEET TITLE: SCALE Institute of Standards and Technology NIST Campus Gaithersburg, MD NET ZERO ENERGY RESIDENTIAL TEST FACILITY

  18. Impacts of a 10% Renewable Portfolio Standard

    Reports and Publications (EIA)

    2002-01-01

    This service report addresses the renewable portfolio standard provision of S. 1766. At Senator Murkowski's request it also includes an analysis of the impacts of a renewable portfolio standard (RPS) patterned after the one called for in S. 1766, but where the required share is based on a 20% RPS by 2020 rather than the 10% RPS called for in S. 1766.

  19. NBS HANDBOOK 137 NATIONAL BUREAU OF STANDARDS

    E-Print Network [OSTI]

    NBS HANDBOOK 137 #12;NATIONAL BUREAU OF STANDARDS The National Bureau of Standards1 was established) scientific and technological services for industry and government, (3) a technical basis for equity in trade, and (4) technical services to promote public safety. The Bureau's technical work is performed

  20. Radiation Therapy Program Technical Standards Procedure

    E-Print Network [OSTI]

    MacMillan, Andrew

    Radiation Therapy Program Technical Standards Procedure Original Approval Date: October 27, 2014 of the Radiation Therapy Program. 1 #12;Radiation Therapy Program Technical Standards Procedure accurately observe, as well as competently and independently complete complex technical procedures in a reasonable amount

  1. University of Edinburgh Feedback Standards & Guiding Principles

    E-Print Network [OSTI]

    Edinburgh, University of

    1 University of Edinburgh Feedback Standards & Guiding Principles Feedback plays a vital role out the standards required of feedback at Edinburgh, together with a framework of guiding principles within timetabled classes (tutorials, practicals, lectures) as well as more informally. And feedback

  2. UK Forestry Standard Guidelines Forests and

    E-Print Network [OSTI]

    Standard Guidelines #12;© Crown Copyright 2011 You may re-use this information (not including logos) free, visit: www.nationalarchives.gov.uk/doc/open-government-licence or write to the Information Policy Team; ecosystem services; environment; forestry; sustainable forest management; UK Forestry Standard. FCGL002/FC

  3. -Standard -PS 3.18-2008

    E-Print Network [OSTI]

    Rumolo, Giovanni

    , or inspect products, designs, or installations for safety or health purposes. Any certification or other.18-2008 Page 3 - Standard - FOREWORD This part of the DICOM standard was developed jointly with ISO TC 215 and is published by both organizations. The text is identical to that published by ISO as ISO DIS 17432, though

  4. Webinar: Introduction to SAE Hydrogen Fueling Standardization

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "Introduction to SAE Hydrogen Fueling Standardization" on Thursday, September 11. The webinar will provide an overview of the SAE Standards SAE J2601 and J2799 and how they are applied to hydrogen fueling for fuel cell electric vehicles (FCEVs).

  5. DOE Standard: Fire protection design criteria

    SciTech Connect (OSTI)

    Not Available

    1999-07-01

    The development of this Standard reflects the fact that national consensus standards and other design criteria do not comprehensively or, in some cases, adequately address fire protection issues at DOE facilities. This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, National Fire Protection Association (NFPA) Codes and Standards, and any other applicable DOE construction criteria. This Standard replaces certain mandatory fire protection requirements that were formerly in DOE 5480.7A, ``Fire Protection``, and DOE 6430.1A, ``General Design Criteria``. It also contains the fire protection guidelines from two (now canceled) draft standards: ``Glove Box Fire Protection`` and ``Filter Plenum Fire Protection``. (Note: This Standard does not supersede the requirements of DOE 5480.7A and DOE 6430.1A where these DOE Orders are currently applicable under existing contracts.) This Standard, along with the criteria delineated in Section 3, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  6. Glueballs, Hybrids and the Standard Model

    E-Print Network [OSTI]

    Bonn, Universität

    Glueballs, Hybrids and the Standard Model: Hadron '97 Summary (Experiment) Eberhard Klempt views. 1 Introduction The role of gluons in hadron spectroscopy is the continuing theme of the HADRON news on the possibilty that the frontiers of the Standard Model may have been reached or surpassed

  7. NHA HYDROGEN SAFETY CODES AND STANDARDS ACTIVITIES

    E-Print Network [OSTI]

    ;putting U.S. manufacturers of hydrogen energy systems and components at risk of competitive disadvantage activity to develop and write new standards for hydrogen technologies. This includes such items as storage needed to move hydrogen into the energy sector. The NHA supports the development of codes and standards

  8. Use of growth factors and adhesive ligands to promote connective tissue progenitor colony formation from fresh marrow

    E-Print Network [OSTI]

    Marcantonio, Nicholas A. (Nicholas Alexander)

    2008-01-01

    The current gold standard for bone graft material is autologous bone, which provides mechanical support, possesses factors that promote bone formation, and contains connective tissue progenitors (CTPs), a heterogeneous ...

  9. Vermont Air Pollution Control Regulations, Ambient Air Quality Standards (Vermont)

    Broader source: Energy.gov [DOE]

    The ambient air quality standards are based on the national ambient air quality standards. The Vermont standards are classified as primary and secondary standards and judged adequate to protect...

  10. Control Systems Cyber Security Standards Support Activities

    SciTech Connect (OSTI)

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  11. Appliance Efficiency Standards and Price Discrimination

    SciTech Connect (OSTI)

    Spurlock, Cecily Anna

    2013-05-08

    I explore the effects of two simultaneous changes in minimum energy efficiency and ENERGY STAR standards for clothes washers. Adapting the Mussa and Rosen (1978) and Ronnen (1991) second-degree price discrimination model, I demonstrate that clothes washer prices and menus adjusted to the new standards in patterns consistent with a market in which firms had been price discriminating. In particular, I show evidence of discontinuous price drops at the time the standards were imposed, driven largely by mid-low efficiency segments of the market. The price discrimination model predicts this result. On the other hand, in a perfectly competition market, prices should increase for these market segments. Additionally, new models proliferated in the highest efficiency market segment following the standard changes. Finally, I show that firms appeared to use different adaptation strategies at the two instances of the standards changing.

  12. Journal Information Journal Impact Factor

    E-Print Network [OSTI]

    Krejcí, Pavel

    Journal Information Journal Impact Factor 5-Year Journal Impact Factor Journal Self Cites Journal Immediacy Index 2014 JCR Science Edition Journal: Applications of Mathematics Mark Journal Title ISSN Total- life APPL MATH-CZECH 0862-7940 241 0.400 0.430 0.024 42 8.9 >10.0 Cited Journal Citing Journal Source

  13. Journal Information Journal Impact Factor

    E-Print Network [OSTI]

    Krejcí, Pavel

    Journal Information Journal Impact Factor 5-Year Journal Impact Factor Journal Self Cites Journal Immediacy Index 2012 JCR Science Edition Journal: Applications of Mathematics Mark Journal Title ISSN Total- life APPL MATH-CZECH 0862-7940 240 0.222 0.549 0.054 37 7.3 >10.0 Cited Journal Citing Journal Source

  14. Progress and Effect of Energy-Saving Standards in China

    Office of Energy Efficiency and Renewable Energy (EERE)

    Information about the development of energy-saving standards in China, results of standards, and work highlights.

  15. Quality Control, Standardization of Upgrades, and Workforce Expectatio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Control, Standardization of Upgrades, and Workforce Expectations Quality Control, Standardization of Upgrades, and Workforce Expectations Better Buildings Residential...

  16. Software Development Standard and Software Engineering Practice: A Case Study of Bangladesh

    E-Print Network [OSTI]

    Begum, Zerina; Hafiz, Mohd Zulfiquar; Islam, Md Saiful; Shoyaib, Md; 10.3329/jbas.v32i2.2432

    2010-01-01

    Improving software process to achieve high quality in a software development organization is the key factor to success. Bangladeshi software firms have not experienced much in this particular area in comparison to other countries. The ISO 9001 and CMM standard has become a basic part of software development. The main objectives of our study are: 1) To understand the software development process uses by the software developer firms in Bangladesh 2) To identify the development practices based on established quality standard and 3) To establish a standardized and coherent process for the development of software for a specific project. It is revealed from this research that software industries of Bangladesh are lacking in target set for software process and improvement, involvement of quality control activities, and standardize business expertise practice. This paper investigates the Bangladeshi software industry in the light of the above challenges.

  17. 16.6 Building Design Standards Page 1 of 8 Building Design Standards

    E-Print Network [OSTI]

    Hung, I-Kuai

    16.6 Building Design Standards Page 1 of 8 Building Design Standards Original Implementation: July 21, 2009 Last Revision: July 28, 2015 1. Statement of purpose This standard provides the building designer with general guidance regarding the university's intent to develop a campus of buildings having

  18. ASHRAE's Residential Ventilation Standard: Exegesis of Proposed Standard 62.2 

    E-Print Network [OSTI]

    Sherman, M.

    2000-01-01

    . The standard is an attempt by the Society to address concerns over indoor air quality in dwellings and to set minimum standards that would allow for energy efficiency measures to be evaluated. The standard has requirements for whole-house ventilation, local...

  19. Issues in the Next Generation of Dependability Standards Existing IEEE software reliability standards do not

    E-Print Network [OSTI]

    Lyu, Michael R.

    systems. The extant software reliability standards and practices, using IEEE 982 [1] and AIAA R013 [2Issues in the Next Generation of Dependability Standards Abstract Existing IEEE software, these standards do not consider both hardware and software reliability nor do they include availability

  20. Construction Standards and Costs UC Irvine new construction pursues performance goals and applies quality standards that

    E-Print Network [OSTI]

    Rose, Michael R.

    Construction Standards and Costs UC Irvine new construction pursues performance goals and applies quality standards that affect the costs of capital projects. Periodic re-examination of these goals and standards is warranted. Construction costs are not "high" or "low" in the abstract, but rather in relation

  1. Elastic enhancement factor as a quantum chaos probe

    E-Print Network [OSTI]

    Kharkov, Yaroslav A

    2012-01-01

    Recent development of the resonance scattering theory with a transient from the regular to chaotic internal dynamics inspires renewed interest to the problem of the elastic enhancement phenomenon. We reexamine the question what the experimentally observed value of the elastic enhancement factor can tell us about the character of dynamics of the intermediate system. Noting first a remarkable connection of this factor with the time delays variance in the case of the standard Gaussian ensembles we then prove the universal nature of such a relation. This reduces our problem to that of calculation of the Dyson's binary form factor in the whole transition region. By the example of systems with no time-reversal symmetry we then demonstrate that the enhancement can serve as a measure of the degree of internal chaos.

  2. Elastic enhancement factor as a quantum chaos probe

    E-Print Network [OSTI]

    Yaroslav A. Kharkov; Valentin V. Sokolov

    2012-12-30

    Recent development of the resonance scattering theory with a transient from the regular to chaotic internal dynamics inspires renewed interest to the problem of the elastic enhancement phenomenon. We reexamine the question what the experimentally observed value of the elastic enhancement factor can tell us about the character of dynamics of the intermediate system. Noting first a remarkable connection of this factor with the time delays variance in the case of the standard Gaussian ensembles we then prove the universal nature of such a relation. This reduces our problem to that of calculation of the Dyson's binary form factor in the whole transition region. By the example of systems with no time-reversal symmetry we then demonstrate that the enhancement can serve as a measure of the degree of internal chaos.

  3. Incorporating Experience Curves in Appliance Standards Analysis

    SciTech Connect (OSTI)

    Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

    2011-10-31

    The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

  4. 1997 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    1997-10-01

    The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. The workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.

  5. CAFE Standards (released in AEO2010)

    Reports and Publications (EIA)

    2010-01-01

    Pursuant to the Presidents announcement of a National Fuel Efficiency Policy, the National Highway Traffic Safety Administration (NHTSA) and the EPA have promulgated nationally coordinated standards for tailpipe Carbon Dioxide (CO2)-equivalent emissions and fuel economy for light-duty vehicles (LDVs), which includes both passenger cars and light-duty trucks. In the joint rulemaking, the Environmental Protection Agency is enacting CO2-equivalent emissions standards under the Clean Air Act (CAA), and NHTSA is enacting companion Corporate Average Fuel Economy standards under the Energy Policy and Conservation Act, as amended by the Energy Independence and Security Act of 2007.

  6. Standards and Codes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4EnergySolidof2Standard Method of TestStandardStandards

  7. Standard Test Method for Sandwich Corrosion Test

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method defines the procedure for evaluating the corrosivity of aircraft maintenance chemicals, when present between faying surfaces (sandwich) of aluminum alloys commonly used for aircraft structures. This test method is intended to be used in the qualification and approval of compounds employed in aircraft maintenance operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements appear in Section 9.

  8. Assorted QCI Tips and Standards Review

    Broader source: Energy.gov [DOE]

    This document contains a list of tips for taking the Quality Control Inspector (QCI) Home Energy Professional Certification Exam and a review of standards, provided by the University of Illinois, Urbana-Champaign's Indoor Climate Research & Training.

  9. Florida State University Telecommunications Infrastructure Standard

    E-Print Network [OSTI]

    Document developed by: Information Technology Services Network Infrastructure Division #12;Florida State University ­ ITS Telecommunications Infrastructure Standards 2 INTRODUCTION ........3 REVISION HISTORY Information Technology Services Network & Communications Technology Division 644 W. Call Street Tallahassee

  10. China Cools with Tighter RAC Standards

    E-Print Network [OSTI]

    Lin, Jiang; Rosenquist, Gregory

    2006-01-01

    Central Air Conditioners and Heat Pumps Energy ConservationRoom Air-Conditioning Heat Pumps: An Engineering and Life-W EER W/W B A Split Heat pump Heat pump Where the standards

  11. The standard model and the lattice

    E-Print Network [OSTI]

    Michael Creutz

    1998-04-15

    I discuss some of the difficulties with formulating chiral symmetry on the lattice and review a recently proposed scheme for a fully finite and exactly gauge invariant lattice regularization of the standard model.

  12. Raising the Standard of AI Products 

    E-Print Network [OSTI]

    Bundy, Alan; Clutterbuck, R.

    1985-01-01

    We propose a mechanism for the promotion of high-standards in commercial Artificial Intelligence products, namely an association of companies which would regulate their own membership using a code of practice and the ...

  13. Phonetic transcription standards for european names (onomastica). 

    E-Print Network [OSTI]

    Schmidt, Mark; Fitt, Susan; Scott, Christina; Jack, Mervyn A

    1993-01-01

    This paper details the standards identified for phonetic transcription of names as part of the ONOMASTICA project, a European-wide research initiative for the construction of a multi-language pronunciation lexicon ...

  14. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01

    Voluntary Agreements for Energy Efficiency or GHG EmissionsACEEE Summer Study on Energy Efficiency in Industry, WestStandard for Industrial Energy Efficiency A. McKane 1 , R.

  15. Hazardous Waste Management Standards and Regulations (Kansas)

    Broader source: Energy.gov [DOE]

    This act states the standards and regulations for the management of hazardous waste. No person shall construct, modify or operate a hazardous waste facility or otherwise dispose of hazardous waste...

  16. Geothermal Power Plants — Meeting Clean Air Standards

    Broader source: Energy.gov [DOE]

    Geothermal power plants can meet the most stringent clean air standards. They emit little carbon dioxide, very low amounts of sulfur dioxide, and no nitrogen oxides. See Charts 1, 2, and 3 below.

  17. Tissue sampling and standards for vertebrate genomics

    E-Print Network [OSTI]

    2012-01-01

    and standards for vertebrate genomics. GigaScience 2012 1:8.transition to conservation genomics. TIG 2010, 26:177–187.Siemens DH: Ecological genomics––changing perspectives on

  18. Status of Revisions to ASHRAE Standard 62 

    E-Print Network [OSTI]

    Gallo, F. M.

    1998-01-01

    The American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Standard 62- 1989 "Ventilation for Acceptable Indoor air Quality", adopted in 1989, is widely used by HVAC engineers to determine ventilation rates for various...

  19. Future Colliders Beyond the Standard Model

    E-Print Network [OSTI]

    Murayama, Hitoshi

    17 Future Colliders Beyond the Standard Model By the early 1980s there were persuasive arguments the default future of international high energy physics. The LHC project calls for two multipurpose detectors

  20. The UK Woodland Assurance Standard Second Edition

    E-Print Network [OSTI]

    processes. Seven years on, it is clear that the working group which prepared the standard produced a first Kingdom. This second edition has again been developed by a multi-stakeholder steering group whose work

  1. Lectures on Physics Beyond the Standard Model

    E-Print Network [OSTI]

    Ben Gripaios

    2015-03-09

    These four lectures, given at the British Universities Summer School in Theoretical Elementary Particle Physics (BUSSTEPP), held in 2014 in Southampton, are a brief introduction to a selection of current topics in physics Beyond the Standard Model.

  2. Moving Forward With Fuel Economy Standards

    E-Print Network [OSTI]

    Schipper, Lee

    2009-01-01

    Council. Automotive Fuel Economy: How Far Can We Go? (Lee Schipper. Automobile Fuel. Economy and CO 2 Emissions inGraham. The Effect of Fuel Economy Standards on Automobile

  3. Moving Beyond Prevailing Street Design Standards

    E-Print Network [OSTI]

    Kammen, Daniel M.

    12 The California Fire Code and other state laws 12 Local policies and design standards 14 Case law like to thank the Fresno and Sacramento city officials who took the time to share valuable information

  4. Impacts of a 15% Renewable Portfolio Standard

    Reports and Publications (EIA)

    2007-01-01

    This analysis responds to a request from Senator Jeff Bingaman that the Energy Information Administration (EIA) analyze a renewable portfolio standard (RPS) requiring that 15% of U.S. electricity sales be derived from qualifying renewable energy resources.

  5. Standard guide for sampling radioactive tank waste

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This guide addresses techniques used to obtain grab samples from tanks containing high-level radioactive waste created during the reprocessing of spent nuclear fuels. Guidance on selecting appropriate sampling devices for waste covered by the Resource Conservation and Recovery Act (RCRA) is also provided by the United States Environmental Protection Agency (EPA) (1). Vapor sampling of the head-space is not included in this guide because it does not significantly affect slurry retrieval, pipeline transport, plugging, or mixing. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  6. DOE Hosts LED Industry Standards Workshop

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy hosted an LED Industry Standards Workshop on March 1, 2006 in Washington, D.C. The Workshop provided a forum to encourage greater cooperation and coordination among...

  7. Electrical and Production Load Factors 

    E-Print Network [OSTI]

    Sen, Tapajyoti

    2010-07-14

    Load factors are an important simplification of electrical energy use data and depend on the ratio of average demand to peak demand. Based on operating hours of a facility they serve as an important benchmarking tool for the industrial sector...

  8. Efficient Networks for Quantum Factoring

    E-Print Network [OSTI]

    David Beckman; Amalavoyal N. Chari; Srikrishna Devabhaktuni; John Preskill

    1996-02-21

    We consider how to optimize memory use and computation time in operating a quantum computer. In particular, we estimate the number of memory qubits and the number of operations required to perform factorization, using the algorithm suggested by Shor. A $K$-bit number can be factored in time of order $K^3$ using a machine capable of storing $5K+1$ qubits. Evaluation of the modular exponential function (the bottleneck of Shor's algorithm) could be achieved with about $72 K^3$ elementary quantum gates; implementation using a linear ion trap would require about $396 K^3$ laser pulses. A proof-of-principle demonstration of quantum factoring (factorization of 15) could be performed with only 6 trapped ions and 38 laser pulses. Though the ion trap may never be a useful computer, it will be a powerful device for exploring experimentally the properties of entangled quantum states.

  9. Human Factors of Reporting Systems

    E-Print Network [OSTI]

    Johnson, C.W.

    Johnson,C.W. P. Carayon (ed.), A Handbook of Human Factors and Ergonomics in Healthcare and Patient Safety, Lawrence Erlbaum, London, UK. pp 715-750 Lawrence Erlbaum Associates

  10. CAVIAR Hardware Interface Standards, Version P. Hafliger

    E-Print Network [OSTI]

    Häfliger, Philipp

    to the extent that ensures the compat- ibility of all participants' devices, e.g. AER-PCBs, AER-chips, and AER A For issue 2.0: · Pin out of the 100 pin AER chip standard for a PGA100 packaging in section 2.1 has replaced this 100 pin AER chips can be found in section 3. 1 #12;AER signal name description ATA standard pin number

  11. State Appliance Standards (released in AEO2009)

    Reports and Publications (EIA)

    2009-01-01

    State appliance standards have existed for decades, starting with Californias enforcement of minimum efficiency requirements for refrigerators and several other products in 1979. In 1987, recognizing that different efficiency standards for the same products in different states could create problems for manufacturers, Congress enacted the National Appliance Energy Conservation Act (NAECA), which initially covered 12 products. The Energy Policy Act of 1992 (EPACT92), EPACT2005, and EISA2007 added additional residential and commercial products to the 12 products originally specified under NAECA.

  12. Effect of noise on the standard mapping

    SciTech Connect (OSTI)

    Karney, C.F.F.; Rechester, A.B.; White, R.B.

    1981-03-01

    The effect of a small amount of noise on the standard mapping is considered. Whenever the standard mapping possesses accelerator models (where the action increases approximately linearly with time), the diffusion coefficient contains a term proportional to the reciprocal of the variance of the noise term. At large values of the stochasticity parameter, the accelerator modes exhibit a universal behavior. As a result the dependence of the diffusion coefficient on stochasticity parameter also shows some universal behavior.

  13. An alternative to the standard model

    SciTech Connect (OSTI)

    Baek, Seungwon; Ko, Pyungwon; Park, Wan-Il

    2014-06-24

    We present an extension of the standard model to dark sector with an unbroken local dark U(1){sub X} symmetry. Including various singlet portal interactions provided by the standard model Higgs, right-handed neutrinos and kinetic mixing, we show that the model can address most of phenomenological issues (inflation, neutrino mass and mixing, baryon number asymmetry, dark matter, direct/indirect dark matter searches, some scale scale puzzles of the standard collisionless cold dark matter, vacuum stability of the standard model Higgs potential, dark radiation) and be regarded as an alternative to the standard model. The Higgs signal strength is equal to one as in the standard model for unbroken U(1){sub X} case with a scalar dark matter, but it could be less than one independent of decay channels if the dark matter is a dark sector fermion or if U(1){sub X} is spontaneously broken, because of a mixing with a new neutral scalar boson in the models.

  14. Analysis of the economic effects of U. S. energy-efficiency standards. Master's thesis

    SciTech Connect (OSTI)

    Snellings, P.W.

    1991-06-01

    The purpose of this study is to analyze the economic effects of federally mandated energy efficiency standards on the market for appliances. The analytical focal point of this thesis centers on representative studies and Congressional testimony supplemented by current articles and data. The benefits and costs of energy efficiency standard implementation are examined. Economic assumptions and key determinant factors that drive results such as discount rate selection, provide the basis for objective comparison. The findings of this study support the need for Federal intervention in the home appliance market to alleviate economic market failures.

  15. Comprehensive Pyrometry of Incandescent Multiwalled Carbon Nanotubes and Graphene in the Visible and Near Infrared

    E-Print Network [OSTI]

    Singer, Scott

    2012-01-01

    chip’s membrane backlit by lightbulb using 500 nm ?lter. Inconnection. A small lightbulb is placed in the backside ofchip’s membrane backlit by lightbulb using 500 nm ?lter. In

  16. Comprehensive Pyrometry of Incandescent Multiwalled Carbon Nanotubes and Graphene in the Visible and Near Infrared

    E-Print Network [OSTI]

    Singer, Scott

    2012-01-01

    Systems Nanofabrication Cleanroom (ISNC) in the Californiawafer. Place the wafer on cleanroom paper and, using a Q-lifto?, place the wafer on a cleanroom paper towel and use a

  17. High Spatial Resolution Laser Cavity Extinction and Laser Induced Incandescence in Low Soot Producing Flames

    E-Print Network [OSTI]

    Tian, B.; Gao, Y.; Balusamy, S.; Hochgreb, S.

    2015-06-26

    1 Introduction Soot particles generated from combustion are both a significant atmo- spheric pollutant, as well as a contributor to climate change [1–4]. Many techniques have therefore been developed to measure soot particles from a variety... ,34] is that the present technique does not rely on pulsed, shot-to-shot measurements, but rather a low power, low cost CW laser. This allows for a much simpler, less expensive system, which does not require a fast response detector and signal receiver capable of nanosec...

  18. Aerosol Mass Spectrometry via Laser-Induced Incandescence Particle Vaporization Final Report

    SciTech Connect (OSTI)

    Timothy B. Onasch

    2011-10-20

    We have successfully developed and commercialized a soot particle aerosol mass spectrometer (SP-AMS) instrument to measure mass, size, and chemical information of soot particles in ambient environments. The SP-AMS instrument has been calibrated and extensively tested in the laboratory and during initial field studies. The first instrument paper describing the SP-AMS has been submitted for publication in a peer reviewed journal and there are several related papers covering initial field studies and laboratory studies that are in preparation. We have currently sold 5 SP-AMS instruments (either as complete systems or as SP modules to existing AMS instrument operators).

  19. CALiPER Benchmark Report: Performance of Halogen Incandescent MR16 Lamps and LED Replacement

    SciTech Connect (OSTI)

    None

    2008-11-01

    This benchmark report addresses the halogen MR16 lamp and its commercially available light-emitting diode (LED) replacements.

  20. Comprehensive Pyrometry of Incandescent Multiwalled Carbon Nanotubes and Graphene in the Visible and Near Infrared

    E-Print Network [OSTI]

    Singer, Scott

    2012-01-01

    Graphene As graphene is a zero-gap semiconductor, transportsemiconductor technology. The performance of grapheneGraphene, an atomically thin sheet of sp 2 bonded carbon, is a zero-bandgap semiconductor

  1. Standard Model Higgs Boson Combination at the Tevatron

    E-Print Network [OSTI]

    Wei-Ming Yao for the CDF; D0 Collaborations

    2012-01-24

    We present the recent results from combinations of searches for a standard model (SM) Higgs boson ($H$) by the CDF and D0 experiments at the Tevatron $p\\bar p$ collider at $\\sqrt{s}=1.96$ TeV. The data correspond to an integrated total luminosity of 8.2 (CDF) and 8.6 (D0) fb$^{-1}$. Compared to the previous Tevatron Higgs boson search combination more data have been added, additional channels have been added, and some previously used channels have been reanalyzed to gain sensitivity. No excess is observed above background expectation, and set 95% C.L. upper limits (median expected) on Higgs boson production at factors of 1.17 (1.16), 1.71 (1.16), and 0.48(0.57) times the SM predictions for Higgs bosons of mass $m_H$=115, 140, and 165 GeV/c$^2$, respectively. We exclude a standard-model Higgs boson in the mass range 156--177 GeV/c$^2$ at the 95% C.L, with an expected exclusion region 148--180 GeV/c$^2$. The absence of a Higgs boson signal also constrains some new physics such as $4^{th}$ generation models and other exotic models.

  2. Standard practices for verification of speed for material testing machines

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 These practices cover procedures and requirements for the calibration and verification of testing machine speed by means of standard calibration devices. This practice is not intended to be complete purchase specifications for testing machines. 1.2 These practices apply to the verification of the speed application and measuring systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, setting, etc. In all cases the buyer/owner/user must designate the speed-measuring system(s) to be verified. 1.3 These practices give guidance, recommendations, and examples, specific to electro-mechanical testing machines. The practice may also be used to verify actuator speed for hydraulic testing machines. 1.4 This standard cannot be used to verify cycle counting or frequency related to cyclic fatigue testing applications. 1.5 Since conversion factors are not required in this practice, either SI units (mm/min), or English [in/min], can be used as the standa...

  3. DOE-TSPP-8-2013, Converting DOE Technical Standards to Voluntary...

    Office of Environmental Management (EM)

    8-2013, Converting DOE Technical Standards to Voluntary Consensus Standards DOE-TSPP-8-2013, Converting DOE Technical Standards to Voluntary Consensus Standards Technical Standards...

  4. Safety, codes and standards for hydrogen installations :

    SciTech Connect (OSTI)

    Harris, Aaron P.; Dedrick, Daniel E.; LaFleur, Angela Christine; San Marchi, Christopher W.

    2014-04-01

    Automakers and fuel providers have made public commitments to commercialize light duty fuel cell electric vehicles and fueling infrastructure in select US regions beginning in 2014. The development, implementation, and advancement of meaningful codes and standards is critical to enable the effective deployment of clean and efficient fuel cell and hydrogen solutions in the energy technology marketplace. Metrics pertaining to the development and implementation of safety knowledge, codes, and standards are important to communicate progress and inform future R&D investments. This document describes the development and benchmarking of metrics specific to the development of hydrogen specific codes relevant for hydrogen refueling stations. These metrics will be most useful as the hydrogen fuel market transitions from pre-commercial to early-commercial phases. The target regions in California will serve as benchmarking case studies to quantify the success of past investments in research and development supporting safety codes and standards R&D.

  5. Neutron Sources for Standard-Based Testing

    SciTech Connect (OSTI)

    Radev, Radoslav; McLean, Thomas

    2014-11-10

    The DHS TC Standards and the consensus ANSI Standards use 252Cf as the neutron source for performance testing because its energy spectrum is similar to the 235U and 239Pu fission sources used in nuclear weapons. An emission rate of 20,000 ± 20% neutrons per second is used for testing of the radiological requirements both in the ANSI standards and the TCS. Determination of the accurate neutron emission rate of the test source is important for maintaining consistency and agreement between testing results obtained at different testing facilities. Several characteristics in the manufacture and the decay of the source need to be understood and accounted for in order to make an accurate measurement of the performance of the neutron detection instrument. Additionally, neutron response characteristics of the particular instrument need to be known and taken into account as well as neutron scattering in the testing environment.

  6. Overview of ATLAS Standard Model Measurements

    E-Print Network [OSTI]

    Buttinger, William; The ATLAS collaboration

    2015-01-01

    The precise measurement of known Standard Model processes is an important part of the ATLAS physics programme. A wide spectrum of final states is covered ranging from the measurement of the total proton-proton cross section down to very rare processes like the production of same-sign W pairs. These measurements serve to constrain phenomenological models of the strong interaction, provide precision tests of perturbative QCD calculations up to the next-to-next-to-leading order, improve our knowledge on the proton structure, measure fundamental Standard Model parameters to high precision or test the Electroweak gauge structure, providing model-independent constraints on new physics. Recent highlights of Run-1 measurements are reported, including new results on multi-differential jet and photon production, precision measurements with single W and Z bosons and multiboson production. The ATLAS Standard model group is also committed to perform several measurements with the data collected in the early Run 2 of the LH...

  7. A derivative standard for polarimeter calibration

    SciTech Connect (OSTI)

    Mulhollan, G.; Clendenin, J.; Saez, P. [and others

    1996-10-01

    A long-standing problem in polarized electron physics is the lack of a traceable standard for calibrating electron spin polarimeters. While several polarimeters are absolutely calibrated to better than 2%, the typical instrument has an inherent accuracy no better than 10%. This variability among polarimeters makes it difficult to compare advances in polarized electron sources between laboratories. The authors have undertaken an effort to establish 100 nm thick molecular beam epitaxy grown GaAs(110) as a material which may be used as a derivative standard for calibrating systems possessing a solid state polarized electron source. The near-bandgap spin polarization of photoelectrons emitted from this material has been characterized for a variety of conditions and several laboratories which possess well calibrated polarimeters have measured the photoelectron polarization of cathodes cut from a common wafer. Despite instrumentation differences, the spread in the measurements is sufficiently small that this material may be used as a derivative calibration standard.

  8. NBS SPEC. PUBL. 260 -16 Standard Reference Materials

    E-Print Network [OSTI]

    NBS SPEC. PUBL. 260 - 16 Standard Reference Materials: HOMOGENEITY CHARACTERIZATION OF NBS Materials: Homogeneity Characterization of NBS Spectrometric Standards IV: Preparation and Microprobe. L. Vieth Institute for Materials Research National Bureau of Standards Washington, D.C. 20234

  9. Worldwide Status of Energy Standards for Buildings - Appendices

    E-Print Network [OSTI]

    Janda, K.B.

    2008-01-01

    for the Israeli Standard- Technical Instibltion for BuildingJ 1982 Thermo-Technical Standards (In Czech ''TepelneRehanek J 1982 Thermo-Technical Standards (In Czech "Tepelne

  10. Electronic Vehicle Identification: Industry Standards, Performance, and Privacy Issues

    E-Print Network [OSTI]

    Texas at Austin, University of

    0-5217-P2 Electronic Vehicle Identification: Industry Standards, Performance, and Privacy Issues Administration and the Texas Department of Transportation. Abstract: In this research product, industry standards functions. Keywords: Tolling, electronic vehicle identification, DSRC, standards, performance, electronic

  11. Department of Energy Labor Relations and Standards

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-02-06

    The change would be to remove Chapter I, Labor Relations, and Chapter II Labor Standards from DOE O 350.1 and develop DOE O DOE O 350.3, which will cancel and supersede Chapters I and II in DOE O 350.1. Content of the two chapters will be updated to reflect the Secretarial determination transferring functions for contractor labor relations and labor standards from the Office of Legacy Management to the Office of General Counsel. CRDs for those chapters will also be removed.

  12. Standard Review Plan - Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4EnergySolidof2Standard Method of Test forStandard

  13. Standardization of Transport Properties Measurements: Internal Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo.Hydrogen4EnergySolidof2Standard Method of TestStandard

  14. Attendees: John Cymbalsky, Equipment and Appliance Standards...

    Broader source: Energy.gov (indexed) [DOE]

    the input power quality of the LED Driver satisfied strict power factor and total harmonic distortion requirements. The second stage provides power to the LED light engine in a...

  15. Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments

    E-Print Network [OSTI]

    International Electrotechnical Commission. Geneva

    1997-01-01

    This standard for emission requirements applies to electrical and electronic apparatus intended for use in the industrial locations (both indoor and outdoor, or in proximity to industrial power installations) for which no designed product or product-family emission standard exists. Disturbances in the frequency range 0 Hz to 400 GHz are covered.

  16. Library Web Standards Recommendations of the SCIS Web Standards Working Group

    E-Print Network [OSTI]

    Burg, Theresa

    Library Web Standards Recommendations of the SCIS Web Standards Working Group Prepared by L. Jacobs, J. Head, L. Steinke (1997 February 8) Revised by Web Page Working Group, a sub of the Library. Goals of Library Web Pages: To facilitate access to Library resources To supplement access

  17. Human factors in software development

    SciTech Connect (OSTI)

    Curtis, B.

    1986-01-01

    This book presents an overview of ergonomics/human factors in software development, recent research, and classic papers. Articles are drawn from the following areas of psychological research on programming: cognitive ergonomics, cognitive psychology, and psycholinguistics. Topics examined include: theoretical models of how programmers solve technical problems, the characteristics of programming languages, specification formats in behavioral research and psychological aspects of fault diagnosis.

  18. Nonnegative matrix factorization with -divergence

    E-Print Network [OSTI]

    Cichocki, Andrzej

    Nonnegative matrix factorization with -divergence Andrzej Cichocki a , Hyekyoung Lee b , Yong of Science and Technology San 31 Hyoja-dong, Nam-gu, Pohang 790-784, Korea Abstract Nonnegative matrix reduction, the goal of which is to decompose nonnegative data matrix X into a product of basis matrix

  19. Transfer Factors for Contaminant Uptake

    E-Print Network [OSTI]

    of supply, upon written request as follows: Address: U.S. Nuclear Regulatory Commission OfficeTransfer Factors for Contaminant Uptake by Fruit and Nut Trees Office of Nuclear Regulatory; licensee event reports; and Commission papers and their attachments. NRC publications in the NUREG series

  20. Barriers to CHP with Renewable Portfolio Standards, Draft White...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Barriers to CHP with Renewable Portfolio Standards, Draft White Paper, September 2007 Barriers to CHP with Renewable Portfolio Standards, Draft White Paper, September 2007 The...

  1. Fuel Cells & Renewable Portfolio Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cells & Renewable Portfolio Standards Fuel Cells & Renewable Portfolio Standards Presented at the Clean Energy States Alliance and U.S. Department of Energy Webinar: Fuel...

  2. The New Gold Standard: Environmental Management Introduces the...

    Energy Savers [EERE]

    The New Gold Standard: Environmental Management Introduces the First LEED Gold Industrial Facility The New Gold Standard: Environmental Management Introduces the First LEED Gold...

  3. Technical Standards, Guidance on MELCOR computer code - May 3...

    Office of Environmental Management (EM)

    Standards, Guidance on MELCOR computer code - May 3, 2004 Technical Standards, Guidance on MELCOR computer code - May 3, 2004 May 3, 2004 MELCOR Computer Code Application Guidance...

  4. Technical Standards, DOE Orders and Applicable CFRs/DEAR Crosswalk...

    Energy Savers [EERE]

    Technical Standards, DOE Orders and Applicable CFRsDEAR Crosswalk - February 2, 2002 Technical Standards, DOE Orders and Applicable CFRsDEAR Crosswalk - February 2, 2002 February...

  5. ISSUANCE 2015-11-05: Energy Conservation Standards for Commercial...

    Energy Savers [EERE]

    Standards for Commercial Prerinse Spray Valves: Availability of Provisional Analysis Tools, Notice of Data Availability ISSUANCE 2015-11-05: Energy Conservation Standards for...

  6. Standard Energy Efficiency Data (SEED) Platform - 2014 BTO Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Data (SEED) Platform - 2014 BTO Peer Review Standard Energy Efficiency Data (SEED) Platform - 2014 BTO Peer Review Project Objective The Standard Energy Efficiency Data (SEED)...

  7. Mexico-Standard Assessment of Mitigation Potential and Livelihoods...

    Open Energy Info (EERE)

    Mexico-Standard Assessment of Mitigation Potential and Livelihoods in Smallholder Systems (SAMPLES) Jump to: navigation, search Name Mexico-Standard Assessment of Mitigation...

  8. Results...National Institute of Standards and Technology (NIST...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Standards and Technology (NIST) Workshop on Materials Test Procedures for Hydrogen Pipelines Results...National Institute of Standards and Technology (NIST) Workshop on...

  9. California Energy Standards Recognize the Importance of Filter...

    Energy Savers [EERE]

    Energy Standards Recognize the Importance of Filter Selection - Building America Top Innovation California Energy Standards Recognize the Importance of Filter Selection - Building...

  10. Fact Sheet: Codes and Standards for Energy Storage System Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sheet: Codes and Standards for Energy Storage System Performance and Safety (June 2014) Fact Sheet: Codes and Standards for Energy Storage System Performance and Safety (June 2014)...

  11. Energy Portfolio Standards and the Promotion of Combined Heat...

    Energy Savers [EERE]

    Energy Portfolio Standards and the Promotion of Combined Heat and Power (CHP) White Paper, April 2009 Energy Portfolio Standards and the Promotion of Combined Heat and Power (CHP)...

  12. Wind Turbine Towers Establish New Height Standards and Reduce...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Turbine Towers Establish New Height Standards and Reduce Cost of Wind Energy Wind Turbine Towers Establish New Height Standards and Reduce Cost of Wind Energy Case study that...

  13. Sandia Energy - Standards and Industry Outreach/Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Security for Electric Infrastructure National Supervisory Control and Data Acquisition (SCADA) Standards and Industry OutreachPartnerships Standards and Industry Outreach...

  14. A Summary of Control System Security Standards Activities in...

    Office of Environmental Management (EM)

    security topic. This work focuses on control systems standards applicable to the energy (oil, gas, and electric, but not nuclear) sector. Summary of CS Standards Activities in the...

  15. Public Meeting Attendee List: Sustainable Design Standards for...

    Office of Environmental Management (EM)

    Public Meeting Attendee List: Sustainable Design Standards for Federal Buildings Public Meeting Attendee List: Sustainable Design Standards for Federal Buildings This document is...

  16. Public Meeting Transcript: Sustainable Design Standards for Federal...

    Energy Savers [EERE]

    Public Meeting Transcript: Sustainable Design Standards for Federal Buildings Public Meeting Transcript: Sustainable Design Standards for Federal Buildings This transcript is from...

  17. DOE Standard 1020 - Natural Phenomena Hazard analysis and Design...

    Energy Savers [EERE]

    Standard 1020 - Natural Phenomena Hazard analysis and Design Criteria for DOE Facilities DOE Standard 1020 - Natural Phenomena Hazard analysis and Design Criteria for DOE...

  18. 2015-01-28 Issuance: Energy Conservation Standard for Hearth...

    Energy Savers [EERE]

    2015-01-28 Issuance: Energy Conservation Standard for Hearth Products; NOPR 2015-01-28 Issuance: Energy Conservation Standard for Hearth Products; NOPR This document is a...

  19. Testing and Validation of Vehicle to Grid Communication Standards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Validation of Vehicle to Grid Communication Standards Testing and Validation of Vehicle to Grid Communication Standards 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle...

  20. Technical Meeting: Data/Communication Standards and Interoperability...

    Office of Environmental Management (EM)

    DataCommunication Standards and Interoperability of Building Appliances, Equipment, and Systems Technical Meeting: DataCommunication Standards and Interoperability of Building...

  1. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01

    2000 Summer Study on Energy Efficiency in Buildings 1:1-11 (to energy efficiency standards for buildings. Online ataddress cool roofs in building energy-efficiency standards

  2. Energy Efficiency Standards for Microwave Ovens Saves Consumers...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Efficiency Standards for Microwave Ovens Saves Consumers Energy and Updates the Social Cost of Carbon Energy Efficiency Standards for Microwave Ovens Saves Consumers Energy...

  3. Standard Energy Efficiency Data Platform | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial Buildings Analysis Tools Standard Energy Efficiency Data Platform Standard Energy Efficiency Data Platform An error occurred. Try watching this video on...

  4. Lagrangian Mechanics on the standard Cliffordian Kaehler Manifolds

    E-Print Network [OSTI]

    Mehmet Tekkoyun

    2009-02-21

    This study presents standard Cliffordian Kaehler analogue of Lagrangian mechanics. Also, the some geometric and physical results related to the standard Cliffordian Kaehler dynamical systems are given.

  5. ICR-ICE Standard Operating Procedures (Update Sept 2013) | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ICR-ICE Standard Operating Procedures (Update Sept 2013) ICR-ICE Standard Operating Procedures (Update Sept 2013) ICRICE SOPSep 2013Final.pdf More Documents & Publications...

  6. Neutron Electric Dipole Moments from Beyond the Standard Model...

    Office of Scientific and Technical Information (OSTI)

    Neutron Electric Dipole Moments from Beyond the Standard Model Physics Citation Details In-Document Search Title: Neutron Electric Dipole Moments from Beyond the Standard Model...

  7. Energy Efficiency Standards for Refrigerators in Brazil: A Methodology...

    Open Energy Info (EERE)

    Energy Efficiency Standards for Refrigerators in Brazil: A Methodology for Impact Evaluation Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Efficiency Standards...

  8. Develop Standard Method of Test for Integrated Heat Pump - 2013...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Develop Standard Method of Test for Integrated Heat Pump - 2013 Peer Review Develop Standard Method of Test for Integrated Heat Pump - 2013 Peer Review Emerging Technologies...

  9. DOE Standard on Development and Use of Probabilistic Risk Assessment...

    Energy Savers [EERE]

    DOE Standard on Development and Use of Probabilistic Risk Assessment in DOE Nuclear Safety Applications (draft), December 2010 DOE Standard on Development and Use of Probabilistic...

  10. A Standard Soot Generator for Diesel Particulate Filter Testing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Standard Soot Generator for Diesel Particulate Filter Testing A Standard Soot Generator for Diesel Particulate Filter Testing Poster presentation at the 2007 Diesel...

  11. U.S. Installation, Operation, and Performance Standards for Microturbi...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Installation, Operation, and Performance Standards for Microturbine Generator Sets, August 2000 U.S. Installation, Operation, and Performance Standards for Microturbine Generator...

  12. SBA Increases Size Standards for Waste Remediation Services ...

    Office of Environmental Management (EM)

    review of all size standards for the next several years. An SBA-issued White Paper entitled, "Size Standards Methodology," which explains how SBA establishes, reviews...

  13. POLICY GUIDANCE MEMORANDUM #08 DOE Fair Labor Standards Act ...

    Office of Environmental Management (EM)

    8 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status Determination POLICY GUIDANCE MEMORANDUM 08 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status...

  14. Fact Sheet: Codes and Standards for Energy Storage System Performance...

    Office of Environmental Management (EM)

    Codes and Standards for Energy Storage System Performance and Safety (June 2014) Fact Sheet: Codes and Standards for Energy Storage System Performance and Safety (June 2014) The...

  15. Fact #704: December 5, 2011 Fuel Consumption Standards for New...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    thereafter. Fuel Consumption Target Standards for Gasoline Heavy Pickups and Vans, 2014-2018 Graph showing fuel consumption target standards for gasoline heavy pickups and...

  16. Open Issues in the Development of Safety Standards for Compressed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Issues in the Development of Safety Standards for Compressed Hydrogen Storage at SAE-International Open Issues in the Development of Safety Standards for Compressed Hydrogen...

  17. The renewables portfolio standard in Texas: An early assessment

    E-Print Network [OSTI]

    Wiser, Ryan H.; Langniss, Ole

    2001-01-01

    J. , 2000. Designing a Renewables Portfolio Standard:Resources. Espey, S. , 2001. Renewables Portfolio Standard:Consensus on National Renewables Policy: The Renewables

  18. Effect of Energy Efficiency Standards on Natural Gas Prices

    E-Print Network [OSTI]

    Carnall, Michael

    2012-01-01

    of Conservation on the Natural Gas Price,? memo to RichardEfficiency Standards on Natural Gas Prices Michael Carnall,Efficiency Standards on Natural Gas Prices Michael Carnall,

  19. Saving Energy and Money with Appliance and Equipment Standards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Equipment Standards in the United States Overview Appliance and equipment efficien- cy standards have served as one of the nation's most effective policies for...

  20. Resolving Code and Standard Barriers to Building America Innovations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    resources for a Codes and Standards Innovation (CSI) team to assist research partners and industry in overcoming codes and standards barriers to high-performance innovations. The...

  1. DOE Standard Integration Of Environment,Safety, and Health Into...

    Energy Savers [EERE]

    Standard Integration Of Environment,Safety, and Health Into Facility Disposition Activities DOE Standard Integration Of Environment,Safety, and Health Into Facility Disposition...

  2. High Heat Flux Thermoelectric Module Using Standard Bulk Material...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat Flux Thermoelectric Module Using Standard Bulk Material High Heat Flux Thermoelectric Module Using Standard Bulk Material Presents high heat flux thermoelectric module design...

  3. DOE technical standards list: Directory of points of contact for the DOE Technical Standards Program

    SciTech Connect (OSTI)

    NONE

    1998-01-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31). This TSL is approved for use by all DOE Components (i.e., all DOE Headquarters and field organizations, management and operating contractors, and laboratories). This TSL supplements DOE manuals, directives, orders, and standards. It provides basic and fundamental information for DOE Component personnel involved in identifying standardization documents. It also provides listings of points of contact within DOE and identifies links to points of contact within the Department of Defense (DoD) for coordination of standardization activities. This TSL will be updated to reflect changes in organizations, addresses, and responsibilities as necessary.

  4. The proton gyromagnetic g-factor: an electromagnetic model

    E-Print Network [OSTI]

    G. Sardin

    2009-12-25

    So far, the Standard Model of Elementary Particles has not succeeded getting a trustworthy account of the proton spin, which remains an enigma. This hindrance is known as the proton spin crisis, owing to the experimental evidence already from 1988 suggesting that little or none of the proton spin would come from the spin of the quarks. This prompted theorists to a flood of guessworks about the proton spin. Since it remains unsolved, in the framework of new physics an exploratory approach based on a novel paradigm is proposed, which brings a renewed access to this challenge, through its reciprocal relationship with the g-factor.

  5. Optimization Online - Integer Factorization is in P

    E-Print Network [OSTI]

    Yuly Shipilevsky

    2012-08-31

    Aug 31, 2012 ... Integer Factorization is in P. Yuly Shipilevsky (yulysh2000 ***at*** yahoo.ca). Abstract: A polynomial-time algorithm for integer factorization, ...

  6. University of Toronto Lockout/Tagout Standard

    E-Print Network [OSTI]

    Chan, Hue Sun

    associated energy sources (i.e. electrical, mechanical, hydraulic, pneumatic, chemical, thermal, or other Lockout/Tagout Standard: In University workplaces, the various forms of energy associated with machinery activities, specific lockout/tagout procedures to control potentially harmful energy sources must

  7. Supply Chain Management Standards in Ubiquitous Commerce

    E-Print Network [OSTI]

    Roussos, George

    is the use of open, worldwide data standards for globally unique product identifiers and product in the world. Lyons made its name as the provider of cupcakes served at its tea shops and Corner House cafes being hit by recession and an oil crisis and in 1978 was acquired by Allied Breweries Ltd. Lyons

  8. Standard Operating Procedure (SOP) Drill Press

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    Standard Operating Procedure (SOP) ­ Drill Press · Know the location of start and stop switches or buttons and keep the drill press table free of tools and other materials. · Use only properly sharpened while the drill press is in motion. · Do not insert a drill chuck key into the chuck until the power

  9. Superconnections an Interpretation of the Standard Model

    E-Print Network [OSTI]

    Roepstorff, G

    1999-01-01

    The mathematical framework of superbundles suggests that one considers the Higgs field as a natural constituent of a superconnection. I propose to take as superbundle the exterior algebra obtained from a Hermitian vector bundle of rank 5 for the Standard Model.

  10. Superconnections: an Interpretation of the Standard Model

    E-Print Network [OSTI]

    G. Roepstorff

    1999-07-30

    The mathematical framework of superbundles suggests that one considers the Higgs field as a natural constituent of a superconnection. I propose to take as superbundle the exterior algebra obtained from a Hermitian vector bundle of rank 5 for the Standard Model.

  11. SUMMARY GUIDANCE FOR BENCHMARK PERFORMANCE STANDARDS Performance

    E-Print Network [OSTI]

    SUMMARY GUIDANCE FOR BENCHMARK PERFORMANCE STANDARDS Performance Attributes 0-39% 40-59% 60-79% 80 technical knowledge/skill General technical understanding Superior technical knowledge in all tasks Exceptional technical knowledge; beyond expectations for position Quality Work did not meet minimum

  12. Renewable Fuel Standard Potential Economic and Environmental

    E-Print Network [OSTI]

    Renewable Fuel Standard Potential Economic and Environmental Effects of U.S. Biofuel Policy Wallace. Burke (Cochair)2--Ecology Wallace E. Tyner (Cochair)2--Energy Economics Virginia H. Dale. Miranowski--Agricultural Economics Aristides Patrinos--Renewable Fuel Production Jerald L. Schnoor3--Water

  13. Chemical Hygiene Plan (The OSHA Laboratory Standard)

    E-Print Network [OSTI]

    Walker, Lawrence R.

    Chemical Hygiene Plan (The OSHA Laboratory Standard) Contact: Chemical Hygiene Safety Officer Risk Management & Safety University of Nevada Las Vegas (702) 895-4226 #12;Updated 4/27/2015 ii Chemical Hygiene of the Chemical Hygiene Plan .................................3 D. Permissible Exposure Limits and Threshold

  14. Animal Care and Biosafety STANDARD OPERATING PROCEDURES

    E-Print Network [OSTI]

    Animal Care and Biosafety Committee 1 STANDARD OPERATING PROCEDURES BUACBC-SOP-01 Fish technique for fish species. 1. Materials 1. Water, MS222TM A. Considerations 1. Tricane methanesulphonate (MS222TM) is one of the few anaesthetic registered for veterinary use on fish in Canada and has

  15. RADIATION PROTECTION STANDARDS FOR SCRAP METAL

    E-Print Network [OSTI]

    would replace existing release limits (e.g., the Nuclear Regulatory Commission's Regulatory Guide 1. EPAanticipatesthatestablishingnewstandardswillalterthemanagementofscrapmetalfrom Department of Energy (DOE) facilities and facilities licensed by the Nuclear Regulatory Commission standards. They do not reflect specific regulatory options under consideration by EPA. ES-1 EXECUTIVE

  16. Testing the Standard Model with Kaon Decays

    E-Print Network [OSTI]

    Matthew Moulson

    2012-09-15

    During the last few years, new experimental and theoretical results have allowed ever more stringent tests of the Standard Model to be performed using kaon decays. This overview of recent progress includes an updated evaluation of the CKM matrix element Vus. Tests of CKM unitarity and gauge universality and lepton universality tests with Kl2 and Kl3 decays are discussed.

  17. Code of Record Standard Review Plan (SRP)

    Broader source: Energy.gov [DOE]

    The objective of this Standard Review Plan (SRP) on Code of Record (COR) is to provide guidance for a uniform review of the COR for DOE nuclear projects. DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets.

  18. Factors driving wind power development in the United States

    SciTech Connect (OSTI)

    Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

    2003-05-15

    In the United States, there has been substantial recent growth in wind energy generating capacity, with growth averaging 24 percent annually during the past five years. About 1,700 MW of wind energy capacity was installed in 2001, while another 410 MW became operational in 2002. This year (2003) shows promise of significant growth with more than 1,500 MW planned. With this growth, an increasing number of states are experiencing investment in wind energy projects. Wind installations currently exist in about half of all U.S. states. This paper explores the key factors at play in the states that have achieved a substantial amount of wind energy investment. Some of the factors that are examined include policy drivers, such as renewable portfolio standards (RPS), federal and state financial incentives, and integrated resource planning; as well as market drivers, such as consumer demand for green power, natural gas price volatility, and wholesale market rules.

  19. UPDATING THE NRC GUIDANCE FOR HUMAN FACTORS ENGINEERING REVIEWS.

    SciTech Connect (OSTI)

    O HARA,J.M.; BROWN,W.S.; HIGGINS,J.C.; PERSENSKY,J.J.; LEWIS,P.M.; BONGARRA,J.

    2002-09-15

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) aspects of nuclear plants. NUREG-0800 (Standard Review Plan), Chapter 18, ''Human Factors Engineering,'' is the principal NRC staff guidance document. Two main documents provide the review criteria to support the evaluations. The HFE Program Review Model (NUREG-0711) addresses the design process from planning to verification and validation to design implementation. The Human-System Interface Design Review Guidelines (NUREG-0700) provides the guidelines for the review of the HFE aspects of human-system interface technology, such as alarms, information systems, controls, and control room design. Since these documents were published in 1994 and 1996 respectively, they have been used by NRC staff, contractors, nuclear industry organizations, as well as by numerous organizations outside the nuclear industry. Using feedback from users and NRC research conducted in recent years, both documents have been revised and updated. This was done to ensure that they remain state-of-the-art evaluation tools for changing nuclear industry issues and emerging technologies. This paper describes the methodology used to revise and update the documents and summarizes the changes made to each and their current contents. Index Terms for this report are: Control system human factors, Ergonomics, Human factors, Nuclear power generation safety.

  20. $B\\to\\pi\\ell\\ell$ form factors for new-physics searches from lattice QCD

    E-Print Network [OSTI]

    Bailey, Jon A; Bernard, C; Bouchard, C M; DeTar, C; Du, Daping; El-Khadra, A X; Freeland, E D; Gamiz, E; Gottlieb, Steven; Heller, U M; Kronfeld, A S; Laiho, J; Levkova, L; Liu, Yuzhi; Lunghi, E; Mackenzie, P B; Meurice, Y; Neil, E; Qiu, Si-Wei; Simone, J N; Sugar, R; Toussaint, D; Van de Water, R S; Zhou, Ran

    2015-01-01

    The rare decay $B\\to\\pi\\ell^+\\ell^-$ is sensitive to $b\\to d$ flavor-changing neutral currents, which could arise from physics beyond the Standard Model. Here, we present the first $ab$-$initio$ QCD calculation of the $B\\to\\pi$ tensor form factor $f_T$. Together with the vector and scalar form factors $f_+$ and $f_0$ from our companion work [J. A. Bailey $et~al.$, arXiv:1503.07839], these parameterize the hadronic contribution to $B\\to\\pi$ semileptonic decays in any extension of the Standard Model. We obtain the total branching ratio $\\text{BR}(B^+\\to\\pi^+\\mu^+\\mu^-)=19.5(2.2)\\times10^{-9}$ in the Standard Model, which is the most precise theoretical determination to date, and agrees with the recent measurement from LHCb [R. Aaij, $et~al.$, JHEP $\\mathbf{1212}$, 125 (2012)].

  1. On Factorization of Molecular Wavefunctions

    E-Print Network [OSTI]

    Thierry Jecko; Brian T. Sutcliffe; R. Guy Woolley

    2015-07-18

    Recently there has been a renewed interest in the chemical physics literature of factorization of the position representation eigenfunctions \\{$\\Phi$\\} of the molecular Schr\\"odinger equation as originally proposed by Hunter in the 1970s. The idea is to represent $\\Phi$ in the form $\\varphi\\chi$ where $\\chi$ is \\textit{purely} a function of the nuclear coordinates, while $\\varphi$ must depend on both electron and nuclear position variables in the problem. This is a generalization of the approximate factorization originally proposed by Born and Oppenheimer, the hope being that an `exact' representation of $\\Phi$ can be achieved in this form with $\\varphi$ and $\\chi$ interpretable as `electronic' and `nuclear' wavefunctions respectively. We offer a mathematical analysis of these proposals that identifies ambiguities stemming mainly from the singularities in the Coulomb potential energy.

  2. On Factorization of Molecular Wavefunctions

    E-Print Network [OSTI]

    Thierry Jecko; Brian T. Sutcliffe; R. Guy Woolley

    2015-09-05

    Recently there has been a renewed interest in the chemical physics literature of factorization of the position representation eigenfunctions \\{$\\Phi$\\} of the molecular Schr\\"odinger equation as originally proposed by Hunter in the 1970s. The idea is to represent $\\Phi$ in the form $\\varphi\\chi$ where $\\chi$ is \\textit{purely} a function of the nuclear coordinates, while $\\varphi$ must depend on both electron and nuclear position variables in the problem. This is a generalization of the approximate factorization originally proposed by Born and Oppenheimer, the hope being that an `exact' representation of $\\Phi$ can be achieved in this form with $\\varphi$ and $\\chi$ interpretable as `electronic' and `nuclear' wavefunctions respectively. We offer a mathematical analysis of these proposals that identifies ambiguities stemming mainly from the singularities in the Coulomb potential energy.

  3. On Factorization of Molecular Wavefunctions

    E-Print Network [OSTI]

    Thierry Jecko; Brian T. Sutcliffe; R. Guy Woolley

    2015-10-13

    Recently there has been a renewed interest in the chemical physics literature of factorization of the position representation eigenfunctions \\{$\\Phi$\\} of the molecular Schr\\"odinger equation as originally proposed by Hunter in the 1970s. The idea is to represent $\\Phi$ in the form $\\varphi\\chi$ where $\\chi$ is \\textit{purely} a function of the nuclear coordinates, while $\\varphi$ must depend on both electron and nuclear position variables in the problem. This is a generalization of the approximate factorization originally proposed by Born and Oppenheimer, the hope being that an `exact' representation of $\\Phi$ can be achieved in this form with $\\varphi$ and $\\chi$ interpretable as `electronic' and `nuclear' wavefunctions respectively. We offer a mathematical analysis of these proposals that identifies ambiguities stemming mainly from the singularities in the Coulomb potential energy.

  4. Factors Impacting Decommissioning Costs - 13576

    SciTech Connect (OSTI)

    Kim, Karen; McGrath, Richard [Electric Power Research Institute, 3420 Hillview Ave., Palo Alto, California (United States)] [Electric Power Research Institute, 3420 Hillview Ave., Palo Alto, California (United States)

    2013-07-01

    The Electric Power Research Institute (EPRI) studied United States experience with decommissioning cost estimates and the factors that impact the actual cost of decommissioning projects. This study gathered available estimated and actual decommissioning costs from eight nuclear power plants in the United States to understand the major components of decommissioning costs. Major costs categories for decommissioning a nuclear power plant are removal costs, radioactive waste costs, staffing costs, and other costs. The technical factors that impact the costs were analyzed based on the plants' decommissioning experiences. Detailed cost breakdowns by major projects and other cost categories from actual power plant decommissioning experiences will be presented. Such information will be useful in planning future decommissioning and designing new plants. (authors)

  5. Human factors in waste management

    SciTech Connect (OSTI)

    Moray, N.

    1994-10-01

    This article examines the role of human factors in radioactive waste management. Although few problems and ergonomics are special to radioactive waste management, some problems are unique especially with long term storage. The entire sociotechnical system must be looked at in order to see where improvement can take place because operator errors, as seen in Chernobyl and Bhopal, are ultimately the result of management errors.

  6. Hausdorff dimension and filling factor

    E-Print Network [OSTI]

    Wellington Cruz

    1998-02-25

    We propose a new hierarchy scheme for the filling factor, a parameter which characterizes the occurrence of the Fractional Quantum Hall Effect (FQHE). We consider the Hausdorff dimension, $h$, as a parameter for classifying fractional spin particles, such that, it is written in terms of the statistics of the collective excitations. The number $h$ classifies these excitations with different statistics in terms of its homotopy class.

  7. Review of Draft Regulations Respecting Renewable Energy Standards

    E-Print Network [OSTI]

    Hughes, Larry

    ERG2006/12 Review of Draft Regulations Respecting Renewable Energy Standards made under Section 5 Regulations Respecting Renewable Energy Standards 1 1. Preliminary observations There is no mention of RPS to Renewable Portfolio Standard, not a Renewable Energy Standard. Given that the term Renewable Portfolio

  8. Voting Systems Performance and Test Standards: An Overview

    E-Print Network [OSTI]

    and the National Bureau of Standards cited a significant number of technical and managerial problems affectingVoting Systems Performance and Test Standards: An Overview This document provides an overview of the Voting System Standards (the "Standards"), developed by the Federal Election Commission (FEC

  9. Technical Standards, 2004 Annual Report- July 29, 2004

    Broader source: Energy.gov [DOE]

    Fiscal Year 2004, Annual Report to the Office of Management and Budget, Standards use and Participation

  10. Federal Information Processing Standards Publication 180-2

    E-Print Network [OSTI]

    Babinkostova, Liljana

    implementing this standard and technical data regarding them must comply with these Federal rFederal Information Processing Standards Publication 180-2 (+ Change Notice to include SHA-224) 2002 August 1 Announcing the SECURE HASH STANDARD Federal Information Processing Standards Publications

  11. Federal Information Processing Standards Publication 180-2

    E-Print Network [OSTI]

    implementing this standard and technical data regarding them must comply with these Federal regulationsFederal Information Processing Standards Publication 180-2 2002 August 1 Announcing the SECURE HASH STANDARD Federal Information Processing Standards Publications (FIPS PUBS) are issued by the National

  12. Grantee Checklist for the Guidelines and Standards Requirement

    Broader source: Energy.gov [DOE]

    This document walks Grantees through the Guidelines and Standards requirement of the Quality Work Plan.

  13. Activities of HPS standards committee in environmental remediation

    SciTech Connect (OSTI)

    Stencel, J.R.; Chen, S.Y.

    1994-12-31

    The Health Physics Society (HPS) develops American National Standards in the area of radiation protection using methods approved by the American National Standards Institute (ANSI). Two of its sections, Environmental Health Physics and Contamination Limits, have ongoing standards development which are important to some environmental remediation efforts. This paper describes the role of the HPS standards process and indicates particular standards under development which will be of interest to the reader. In addition, the authors solicit readers to participate in the voluntary standards process by either joining active working groups (WG) or suggesting appropriate and relevant topics which should be placed into the standards process.

  14. Search for the fourth standard model family

    SciTech Connect (OSTI)

    Sahin, M.; Sultansoy, S.; Turkoz, S. [TOBB University of Economics and Technology, Physics Division, Ankara (Turkey); TOBB University of Economics and Technology, Physics Division, Ankara (Turkey) and Institute of Physics, National Academy of Sciences, Baku (Azerbaijan); Ankara University, Department of Physics, Ankara (Turkey)

    2011-03-01

    Existence of the fourth family follows from the basics of the standard model (SM) and the actual mass spectrum of the third family fermions. We discuss possible manifestations of the fourth SM family at existing and future colliders. The LHC and Tevatron potentials to discover the fourth SM family have been compared. The scenario with dominance of the anomalous decay modes of the fourth-family quarks has been considered in detail.

  15. Standard Neutrino Spectrum from B-8 Decay

    E-Print Network [OSTI]

    John N. Bahcall; E. Lisi; D. E. Alburger; L. De Braeckeleer; S. J. Freedman; J. Napolitano

    1996-04-19

    We present a systematic evaluation of the shape of the neutrino energy spectrum produced by beta-decay of $^8$B. We place special emphasis on determining the range of uncertainties permitted by existing laboratory data and theoretical ingredients (such as forbidden and radiative corrections). We review and compare the available experimental data on the $^8$B$(\\beta^+){}^8$Be$(2\\alpha)$ decay chain. We analyze the theoretical and experimental uncertainties quantitatively. We give a numerical representation of the best-fit (standard-model) neutrino spectrum, as well as two extreme deviations from the standard spectrum that represent the total (experimental and theoretical) effective $\\pm3\\sigma$ deviations. Solar neutrino experiments that are currently being developed will be able to measure the shape of the $^8$B neutrino spectrum above about 5 MeV. An observed distortion of the $^8$B solar neutrino spectrum outside the range given in the present work could be considered as evidence, at an effective significance level greater than three standard deviations, for physics beyond the standard electroweak model. We use the most recent available experimental data on the Gamow--Teller strengths in the $A=37$ system to calculate the $^8$B neutrino absorption cross section on chlorine: $\\sigma_{\\rm Cl}=(1.14\\pm0.11)\\times10^{-42}$~cm$^2$ ($\\pm3\\sigma$ errors). The chlorine cross section is also given as a function of the neutrino energy. The $^8$B neutrino absorption cross section in gallium is $\\sigma_{\\rm Ga}=(2.46^{+2.1}_{-1.1})\\times10^{-42}$ cm$^2$ ($\\pm3\\sigma$ errors).

  16. Debugging Standard Document Formats Nabil Layada

    E-Print Network [OSTI]

    Joseph Fourier Grenoble-I, Université

    a variety of examples: XHTML 1.0 has both DTDs and XML Schemas, while XHTML 2.0 has a Relax-NG definitionML 2.0 has both a DTD and an XML Schema, and MathML 3.0 is developed with a Relax- NG and is expected for standardization bodies that define specifi- cations using various XML type definition languages (such as W3C

  17. Type Ia Supernovae: Toward the Standard Model?

    E-Print Network [OSTI]

    David Branch

    2000-12-13

    In this short review I suggest that recent developments support the conjecture that Type Ia supernovae (SNe Ia) are the complete disruptions of Chandrasekhar-mass carbon-oxygen white dwarfs in single-degenerate binary systems. The causes of the observational diversity of SNe Ia within the context of this standard model, and the implications of the model for young remnants of SNe Ia, are briefly discussed.

  18. Renewable Energy Portfolio Standard | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 - Oct. 7,DOERTIRegulatory andProjectSales TaxPortfolio Standard

  19. SAE Standards Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 -Rob Roberts About Us Rob RobertsSelectSAE Standards

  20. SEED: Standard Energy Efficiency Data Platform

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 -Rob Roberts About UsWYOMING ROCKYSECRETARYSEED: Standard

  1. Functional Area Qualification Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015ExecutiveFluorescentDanKathyEnergy QualificationStandards Functional

  2. Asymptotic, multigroup flux reconstruction and consistent discontinuity factors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Trahan, Travis J.; Larsen, Edward W.

    2015-05-12

    Recent theoretical work has led to an asymptotically derived expression for reconstructing the neutron flux from lattice functions and multigroup diffusion solutions. The leading-order asymptotic term is the standard expression for flux reconstruction, i.e., it is the product of a shape function, obtained through a lattice calculation, and the multigroup diffusion solution. The first-order asymptotic correction term is significant only where the gradient of the diffusion solution is not small. Inclusion of this first-order correction term can significantly improve the accuracy of the reconstructed flux. One may define discontinuity factors (DFs) to make certain angular moments of the reconstructed fluxmore »continuous across interfaces between assemblies in 1-D. Indeed, the standard assembly discontinuity factors make the zeroth moment (scalar flux) of the reconstructed flux continuous. The inclusion of the correction term in the flux reconstruction provides an additional degree of freedom that can be used to make two angular moments of the reconstructed flux continuous across interfaces by using current DFs in addition to flux DFs. Thus, numerical results demonstrate that using flux and current DFs together can be more accurate than using only flux DFs, and that making the second angular moment continuous can be more accurate than making the zeroth moment continuous.« less

  3. Web Security Standards and Practices Page 1 of 13 Web Security Standard Operating Environment (SOE) V1.doc

    E-Print Network [OSTI]

    Qian, Ning

    Web Security Standards and Practices Page 1 of 13 Web Security Standard Operating Environment (SOE) V1.doc Columbia University Web Security Standards and Practices Objective and Scope Effective Date: January 2011 This Web Security Standards and Practices document establishes a baseline of security related

  4. Effect of Environmental Factors on Sulfur Gas Emissions from Drywall

    SciTech Connect (OSTI)

    Maddalena, Randy

    2011-08-20

    Problem drywall installed in U.S. homes is suspected of being a source of odorous and potentially corrosive indoor pollutants. The U.S. Consumer Product Safety Commission's (CPSC) investigation of problem drywall incorporates three parallel tracks: (1) evaluating the relationship between the drywall and reported health symptoms; (2) evaluating the relationship between the drywall and electrical and fire safety issues in affected homes; and (3) tracing the origin and the distribution of the drywall. To assess the potential impact on human health and to support testing for electrical and fire safety, the CPSC has initiated a series of laboratory tests that provide elemental characterization of drywall, characterization of chemical emissions, and in-home air sampling. The chemical emission testing was conducted at Lawrence Berkeley National Laboratory (LBNL). The LBNL study consisted of two phases. In Phase 1 of this study, LBNL tested thirty drywall samples provided by CPSC and reported standard emission factors for volatile organic compounds (VOCs), aldehydes, reactive sulfur gases (RSGs) and volatile sulfur compounds (VSCs). The standard emission factors were determined using small (10.75 liter) dynamic test chambers housed in a constant temperature environmental chamber. The tests were all run at 25 C, 50% relative humidity (RH) and with an area-specific ventilation rate of {approx}1.5 cubic meters per square meter of emitting surface per hour [m{sup 3}/m{sup 2}/h]. The thirty samples that were tested in Phase 1 included seventeen that were manufactured in China in 2005, 2006 and 2009, and thirteen that were manufactured in North America in 2009. The measured emission factors for VOCs and aldehydes were generally low and did not differ significantly between the Chinese and North American drywall. Eight of the samples tested had elevated emissions of volatile sulfur-containing compounds with total RSG emission factors between 32 and 258 micrograms per square meter per hour [{micro}g/m{sup 2}/h]. The dominant sulfur containing compounds in the RSG emission stream were hydrogen sulfide with emission factors between 17-201 {micro}g/m{sup 2}/h, and sulfur dioxide with emission factors between 8-64 {micro}g/m{sup 2}/h. The four highest emitting samples also had a unique signature of VSC emissions including > 40 higher molecular weight sulfur-containing compounds although the emission rate for the VSCs was several orders of magnitude lower than that of the RSGs. All of the high emitting drywall samples were manufactured in China in 2005-2006. Results from Phase 1 provided baseline emission factors for drywall samples manufactured in China and in North America but the results exclude variations in environmental conditions that may exist in homes or other built structures, including various combinations of temperature, RH, ventilation rate and the influence of coatings such as texture and paints. The objective of Phase 2 was to quantify the effect of temperature and RH on the RSG emission factors for uncoated drywall, and to measure the effect of plaster and paint coatings on RSG emission factors from drywall. Additional experiments were also performed to assess the influence of ventilation rate on measured emission factors for drywall.

  5. Dissecting Soft Radiation with Factorization

    E-Print Network [OSTI]

    Iain W. Stewart; Frank J. Tackmann; Wouter J. Waalewijn

    2015-02-10

    An essential part of high-energy hadronic collisions is the soft hadronic activity that underlies the primary hard interaction. It includes soft radiation from the primary hard partons, secondary multiple parton interactions (MPI), and factorization-violating effects. The invariant mass spectrum of the leading jet in $Z$+jet and $H$+jet events is directly sensitive to these effects, and we use a QCD factorization theorem to predict its dependence on the jet radius $R$, jet $p_T$, jet rapidity, and partonic process for both the perturbative and nonperturbative components of primary soft radiation. We prove that the nonperturbative contributions involve only odd powers of $R$, and the linear $R$ term is universal for quark and gluon jets. The hadronization model in PYTHIA8 agrees well with these properties. The perturbative soft initial state radiation (ISR) has a contribution that depends on the jet area in the same way as the underlying event, but this degeneracy is broken by dependence on the jet $p_T$. The size of this soft ISR contribution is proportional to the color state of the initial partons, yielding the same positive contribution for $gg\\to Hg$ and $gq\\to Zq$, but a negative interference contribution for $q\\bar q\\to Z g$. Hence, measuring these dependencies allows one to separate hadronization, soft ISR, and MPI contributions in the data.

  6. ANSI/ASHRAE/IES Standard 90.1-2010 Final Determination Quantitative Analysis

    SciTech Connect (OSTI)

    Halverson, Mark A.; Rosenberg, Michael I.; Liu, Bing

    2011-10-31

    The U.S. Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010 (ASHRAE Standard 90.1-2010, Standard 90.1-2010, or 2010 edition) would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2007(ASHRAE Standard 90.1-2007, Standard 90.1-2007, or 2007 edition). The final analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE's final determination. However, out of the 109 addenda, 34 were preliminarily determined to have a measureable and quantifiable impact. A suite of 240 computer energy simulations for building prototypes complying with ASHRAE 90.1-2007 was developed. These prototypes were then modified in accordance with these 34 addenda to create a second suite of corresponding building simulations reflecting the same buildings compliant with Standard 90.1-2010. The building simulations were conducted using the DOE EnergyPlus building simulation software. The resulting energy use from the complete suite of 480 simulation runs was then converted to energy use intensity (EUI, or energy use per unit floor area) metrics (Site EUI, Primary EUI, and energy cost intensity [ECI]) results for each simulation. For each edition of the standard, these EUIs were then aggregated to a national basis for each prototype using weighting factors based on construction floor area developed for each of the 15 U.S. climate zones using commercial construction data. When compared, the resulting weighted EUIs indicated that each of the 16 building prototypes used less energy under Standard 90.1-2010 than under Standard 90.1-2007 on a national basis when considering site energy, primary energy, or energy cost. The EUIs were also aggregated across building types to a national commercial building basis using the same weighting data. On a national basis, the final quantitative analysis estimated a floor-space-weighted national average reduction in new building energy consumption of 18.2 percent for source energy and 18.5 percent when considering site energy. An 18.2 percent savings in energy cost, based on national average commercial energy costs for electricity and natural gas, was also estimated.

  7. Vermont Water Quality Standards | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al.,Turin, NewArkansas:Standards Jump to: navigation, search OpenEI

  8. Beyond Standard Model calculations with Sherpa

    E-Print Network [OSTI]

    Stefan Höche; Silvan Kuttimalai; Steffen Schumann; Frank Siegert

    2015-06-18

    We present a fully automated framework as part of the Sherpa event generator for the computation of tree-level cross sections in beyond Standard Model scenarios, making use of model information given in the Universal FeynRules Output format. Elementary vertices are implemented into C++ code automatically and provided to the matrix-element generator Comix at runtime. Widths and branching ratios for unstable particles are computed from the same building blocks. The corresponding decays are simulated with spin correlations. Parton showers, QED radiation and hadronization are added by Sherpa, providing a full simulation of arbitrary BSM processes at the hadron level.

  9. Analysis of a 10% Renewable Portfolio Standard

    Reports and Publications (EIA)

    2003-01-01

    On May 8, 2003, Senator Jeff Bingaman, the Ranking Minority Member of the Senate Committee on Energy and Natural Resources, requested an analysis of a nationwide Renewable Portfolio Standard (RPS) program proposed to be amended to energy legislation currently pending before the U.S. Senate. With his request Sen. Bingaman provided specific information on the program to be analyzed. This analysis was prepared in response to his request and projects the impact of the proposed program on energy supply, demand, prices, and emissions. The analysis is based on the Annual Energy Outlook 2003 (AEO2003) projections of energy supply, demand, and prices through 2025, as updated in May 2003.

  10. Beyond standard model calculations with Sherpa

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Höche, Stefan; Kuttimalai, Silvan; Schumann, Steffen; Siegert, Frank

    2015-03-24

    We present a fully automated framework as part of the Sherpa event generator for the computation of tree-level cross sections in beyond Standard Model scenarios, making use of model information given in the Universal FeynRules Output format. Elementary vertices are implemented into C++ code automatically and provided to the matrix-element generator Comix at runtime. Widths and branching ratios for unstable particles are computed from the same building blocks. The corresponding decays are simulated with spin correlations. Parton showers, QED radiation and hadronization are added by Sherpa, providing a full simulation of arbitrary BSM processes at the hadron level.

  11. Appendix B-8 Standard Terms and Conditions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal Facility Agreement and Consent0 STANDARD5678

  12. Appendix E: Standard Terms and Conditions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D SFederal Facility Agreement and Consent04A:E STANDARD

  13. Standards for a new genomic era

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque|SensitiveApril 2, 2014ApplicationLanceStaff DeputyStandard

  14. Standard Ethanol LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeter BatterySolarfinMarket Studies Jump to: navigation, searchStandard

  15. Standard Contracts Team | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool FitsProjectDataSecretaryDepartment7 Annual2 SpecialOctober 14,intoof NaturalStandard

  16. Standards Development and Revision | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool FitsProjectDataSecretaryDepartment7 Annual2 SpecialOctoberSafety, CodesStandards

  17. Renewable Fuel Standard Schedule | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report UrlNM-bRenewable Energy RFPsLtd RES GroupStandard Schedule

  18. Standard Review Plan - Overview | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVESDepartmentSpecialCode of Record Standard Review Plan

  19. Standard Review Plan | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVESDepartmentSpecialCode of Record Standard Review

  20. Standards Development Support | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVESDepartmentSpecialCode of Record Standard ReviewFact

  1. Standards for the wireless IoT

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVESDepartmentSpecialCode of Record Standard ReviewFactZigBee

  2. Applying Human Factors during the SIS Life Cycle

    SciTech Connect (OSTI)

    Avery, K.

    2010-05-05

    Safety Instrumented Systems (SIS) are widely used in U.S. Department of Energy's (DOE) nonreactor nuclear facilities for safety-critical applications. Although use of the SIS technology and computer-based digital controls, can improve performance and safety, it potentially introduces additional complexities, such as failure modes that are not readily detectable. Either automated actions or manual (operator) actions may be required to complete the safety instrumented function to place the process in a safe state or mitigate a hazard in response to an alarm or indication. DOE will issue a new standard, Application of Safety Instrumented Systems Used at DOE Nonreactor Nuclear Facilities, to provide guidance for the design, procurement, installation, testing, maintenance, operation, and quality assurance of SIS used in safety significant functions at DOE nonreactor nuclear facilities. The DOE standard focuses on utilizing the process industry consensus standard, American National Standards Institute/ International Society of Automation (ANSI/ISA) 84.00.01, Functional Safety: Safety Instrumented Systems for the Process Industry Sector, to support reliable SIS design throughout the DOE complex. SIS design must take into account human-machine interfaces and their limitations and follow good human factors engineering (HFE) practices. HFE encompasses many diverse areas (e.g., information display, user-system interaction, alarm management, operator response, control room design, and system maintainability), which affect all aspects of system development and modification. This paper presents how the HFE processes and principles apply throughout the SIS life cycle to support the design and use of SIS at DOE nonreactor nuclear facilities.

  3. Non-Higgsable QCD and the Standard Model Spectrum in F-theory

    E-Print Network [OSTI]

    Antonella Grassi; James Halverson; Julius Shaneson; Washington Taylor

    2014-09-29

    Many four-dimensional supersymmetric compactifications of F-theory contain gauge groups that cannot be spontaneously broken through geometric deformations. These "non-Higgsable clusters" include realizations of $SU(3)$, $SU(2)$, and $SU(3) \\times SU(2)$, but no $SU(n)$ gauge groups or factors with $n> 3$. We study possible realizations of the standard model in F-theory that utilize non-Higgsable clusters containing $SU(3)$ factors and show that there are three distinct possibilities. In one, fields with the non-abelian gauge charges of the standard model matter fields are localized at a single locus where non-perturbative $SU(3)$ and $SU(2)$ seven-branes intersect; cancellation of gauge anomalies implies that the simplest four-dimensional chiral $SU(3)\\times SU(2)\\times U(1)$ model that may arise in this context exhibits standard model families. We identify specific geometries that realize non-Higgsable $SU(3)$ and $SU(3) \\times SU(2)$ sectors. This kind of scenario provides a natural mechanism that could explain the existence of an unbroken QCD sector, or more generally the appearance of light particles and symmetries at low energy scales.

  4. International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs

    SciTech Connect (OSTI)

    Zhou, Nan; Zheng, Nina; Fridley, David

    2012-02-28

    Appliance energy efficiency standards and labeling (S&L) programs have been important policy tools for regulating the efficiency of energy-using products for over 40 years and continue to expand in terms of geographic and product coverage. The most common S&L programs include mandatory minimum energy performance standards (MEPS) that seek to push the market for efficient products, and energy information and endorsement labels that seek to pull the market. This study seeks to review and compare some of the earliest and most well-developed S&L programs in three countries and one region: the U.S. MEPS and ENERGY STAR, Australia MEPS and Energy Label, European Union MEPS and Ecodesign requirements and Energy Label and Japanese Top Runner programs. For each program, key elements of S&L programs are evaluated and comparative analyses across the programs undertaken to identify best practice examples of individual elements as well as cross-cutting factors for success and lessons learned in international S&L program development and implementation. The international review and comparative analysis identified several overarching themes and highlighted some common factors behind successful program elements. First, standard-setting and programmatic implementation can benefit significantly from a legal framework that stipulates a specific timeline or schedule for standard-setting and revision, product coverage and legal sanctions for non-compliance. Second, the different MEPS programs revealed similarities in targeting efficiency gains that are technically feasible and economically justified as the principle for choosing a standard level, in many cases at a level that no product on the current market could reach. Third, detailed survey data such as the U.S. Residential Energy Consumption Survey (RECS) and rigorous analyses provide a strong foundation for standard-setting while incorporating the participation of different groups of stakeholders further strengthen the process. Fourth, sufficient program resources for program implementation and evaluation are critical to the effectiveness of standards and labeling programs and cost-sharing between national and local governments can help ensure adequate resources and uniform implementation. Lastly, check-testing and punitive measures are important forms of enforcement while the cancellation of registration or product sales-based fines have also proven effective in reducing non-compliance. The international comparative analysis also revealed the differing degree to which the level of government decentralization has influenced S&L programs and while no single country has best practices in all elements of standards and labeling development and implementation, national examples of best practices for specific elements do exist. For example, the U.S. has exemplified the use of rigorous analyses for standard-setting and robust data source with the RECS database while Japan?s Top Runner standard-setting principle has motivated manufacturers to exceed targets. In terms of standards implementation and enforcement, Australia has demonstrated success with enforcement given its long history of check-testing and enforcement initiatives while mandatory information-sharing between EU jurisdictions on compliance results is another important enforcement mechanism. These examples show that it is important to evaluate not only the drivers of different paths of standards and labeling development, but also the country-specific context for best practice examples in order to understand how and why certain elements of specific S&L programs have been effective.

  5. Capacity Factor Risk At Nuclear Power Plants

    E-Print Network [OSTI]

    Du, Yangbo

    We develop a model of the dynamic structure of capacity factor risk. It incorporates the risk that the capacity factor may vary widely from year-to-year, and also the risk that the reactor may be permanently shutdown prior ...

  6. Cone Penetrometer N Factor Determination Testing Results

    SciTech Connect (OSTI)

    Follett, Jordan R.

    2014-03-05

    This document contains the results of testing activities to determine the empirical 'N Factor' for the cone penetrometer in kaolin clay simulant. The N Factor is used to releate resistance measurements taken with the cone penetrometer to shear strength.

  7. Common risk factors in bank stocks 

    E-Print Network [OSTI]

    Viale, Ariel Marcelo

    2007-09-17

    This dissertation provides evidence on the risk factors that are priced in bank equities. Alternative empirical models with precedent in the nonfinancial asset pricing literature are tested, including the single-factor Capital Asset Pricing Model...

  8. Industrial Equipment Demand and Duty Factors 

    E-Print Network [OSTI]

    Dooley, E. S.; Heffington, W. M.

    1998-01-01

    Demand and duty factors have been measured for selected equipment (air compressors, electric furnaces, injection molding machines, centrifugal loads, and others) in industrial plants. Demand factors for heavily loaded air ...

  9. Guidelines for Power Factor Improvement Projects 

    E-Print Network [OSTI]

    Massey, G. W.

    1999-01-01

    Power factor is an indication of electrical system efficiency. Low power factor, or low system efficiency, may be due to one or more causes, including lightly loaded transformers, oversized electric motors, and harmonic-generating non-linear loads...

  10. State Clean Energy Practices: Renewable Fuel Standards

    SciTech Connect (OSTI)

    Mosey, G.; Kreycik, C.

    2008-07-01

    The State Clean Energy Policies Analysis (SCEPA) project is supported by the Weatherization and Intergovernmental Program within the Department of Energy's Office of Energy Efficiency and Renewable Energy. This project seeks to quantify the impacts of existing state policies, and to identify crucial policy attributes and their potential applicability to other states. The goal is to assist states in determining which clean energy policies or policy portfolios will best accomplish their environmental, economic, and security goals. For example, renewable fuel standards (RFS) policies are a mechanism for developing a market for renewable fuels in the transportation sector. This flexible market-based policy, when properly executed, can correct for market failures and promote growth of the renewable fuels industry better than a more command-oriented approach. The policy attempts to correct market failures such as embedded fossil fuel infrastructure and culture, risk associated with developing renewable fuels, consumer information gaps, and lack of quantification of the non-economic costs and benefits of both renewable and fossil-based fuels. This report focuses on renewable fuel standards policies, which are being analyzed as part of this project.

  11. Globalization of ASME Nuclear Codes and Standards

    SciTech Connect (OSTI)

    Swayne, Rick [Reedy Engineering, 3425 South Bascom Ave. Suite E, Campbell, CA 95008 (United States); Erler, Bryan A. [Erler Engineering, Ltd., North Vernon, Indiana (United States)

    2006-07-01

    With the globalization of the nuclear industry, it is clear that the reactor suppliers are based in many countries around the world (such as United States, France, Japan, Canada, South Korea, South Africa) and they will be marketing their reactors to many countries around the world (such as US, China, South Korea, France, Canada, Finland, Taiwan). They will also be fabricating their components in many different countries around the world. With this situation, it is clear that the requirements of ASME Nuclear Codes and Standards need to be adjusted to accommodate the regulations, fabricating processes, and technology of various countries around the world. It is also very important for the American Society of Mechanical Engineers (ASME) to be able to assure that products meeting the applicable ASME Code requirements will provide the same level of safety and quality assurance as those products currently fabricated under the ASME accreditation process. To do this, many countries are in the process of establishing or changing their regulations, and it is important for ASME to interface with the appropriate organizations in those countries, in order to ensure there is effective use of ASME Codes and standards around the world. (authors)

  12. Closing a Loophole in Factorization Proofs

    SciTech Connect (OSTI)

    Bodwin, Geoffrey T. [HEP Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois, 60439 (United States); Garcia i Tormo, Xavier [HEP Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois, 60439 (United States); Department of Physics, University of Alberta, Edmonton, Alberta, T6G 2G7 (Canada); Lee, Jungil [Department of Physics, Korea University, Seoul 136-701 (Korea, Republic of)

    2011-05-23

    We address the possibility in factorization proofs that low-energy collinear gluons can couple to soft gluons.

  13. http://erg.sagepub.com/ Factors Applications

    E-Print Network [OSTI]

    Kaber, David B.

    http://erg.sagepub.com/ Factors Applications Ergonomics in Design: The Quarterly of Human httpErgonomics in Design: The Quarterly of Human Factors Applications Peter A. Hancock, Richard J. Jagacinski: Human Factors and Ergonomics Society can be found at:Ergonomics in Design: The Quarterly of Human

  14. Human factors: a necessary tool for industry

    SciTech Connect (OSTI)

    Starcher, K.O.

    1984-03-09

    The need for human factors (ergonomics) input in the layout of a ferroelectric ceramics laboratory is presented as an example of the overall need for human factors professionals in industry. However, even in the absence of one trained in human factors, knowledge of a few principles in ergonomics will provide many possibilities for improving performance in the industrial environment.

  15. Note on Integer Factoring Algorithms II

    E-Print Network [OSTI]

    N. A. Carella

    2007-02-08

    This note introduces a new class of integer factoring algorithms. Two versions of this method will be described, deterministic and probabilistic. These algorithms are practical, and can factor large classes of balanced integers N = pq, p < q < 2p in superpolynomial time. Further, an extension of the Fermat factoring method is proposed.

  16. Journal influence factors6 Massimo Franceschet

    E-Print Network [OSTI]

    Franceschet, Massimo

    Journal influence factors6 Massimo Franceschet Department of Mathematics and Computer Science of journal influence, namely 2- year impact factor, 5-year impact factor, eigenfactor and article influence. These indicators have been recently added by Thomson Reuters to the Journal Citation Reports, in both science

  17. Antenna factorization in strongly ordered limits

    SciTech Connect (OSTI)

    Kosower, David A.

    2005-02-15

    When energies or angles of gluons emitted in a gauge-theory process are small and strongly ordered, the emission factorizes in a simple way to all orders in perturbation theory. I show how to unify the various strongly ordered soft, mixed soft-collinear, and collinear limits using antenna factorization amplitudes, which are generalizations of the Catani-Seymour dipole factorization function.

  18. Standard Guide for Testing Polymer Matrix Composite Materials

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This guide summarizes the application of ASTM standard test methods (and other supporting standards) to continuous-fiber reinforced polymer matrix composite materials. The most commonly used or most applicable ASTM standards are included, emphasizing use of standards of Committee D30 on Composite Materials. 1.2 This guide does not cover all possible standards that could apply to polymer matrix composites and restricts discussion to the documented scope. Commonly used but non-standard industry extensions of test method scopes, such as application of static test methods to fatigue testing, are not discussed. A more complete summary of general composite testing standards, including non-ASTM test methods, is included in the Composite Materials Handbook (MIL-HDBK-17). Additional specific recommendations for testing textile (fabric, braided) composites are contained in Guide D6856. 1.3 This guide does not specify a system of measurement; the systems specified within each of the referenced standards shall appl...

  19. Distributional and Efficiency Impacts of Clean and Renewable Energy Standards

    E-Print Network [OSTI]

    Distributional and Efficiency Impacts of Clean and Renewable Energy Standards for Electricity on recycled paper #12;Distributional and Efficiency Impacts of Clean and Renewable Energy Standards supply and demand, including renewable energy resources and generating technologies, while representing

  20. Department of Commerce National Institute of Standards and Technology

    E-Print Network [OSTI]

    manufacturers; and promotion of quality management methods in key sectors, including manufacturing, educationDepartment of Commerce National Institute of Standards and Technology Three Year Programmatic's National Institute of Standards and Technology (NIST) in promoting national competitiveness and innovation

  1. Search for a standard model Higgs boson produced in association...

    Office of Scientific and Technical Information (OSTI)

    Search for a standard model Higgs boson produced in association with a top-quark pair and decaying to bottom quarks using a matrix element method Title: Search for a standard model...

  2. Wind Turbine Towers Establish New Height Standards and Reduce...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wind Turbine Towers Establish New Height Standards and Reduce Cost of Wind Energy Wind Turbine Towers Establish New Height Standards and Reduce Cost of Wind Energy Case study that...

  3. International Review of Frameworks for Standard Setting & Labeling Development

    E-Print Network [OSTI]

    Zhou, Nan

    2014-01-01

    Standards Activities Report to Congress. Washington, DC:standards/pdfs/report_to_congress_february_2012. pdf U.S.in a semi-annual report to Congress (February, 2012) 1 ,

  4. COST ACCOUNTING STANDARDS BOARD DISCLOSURE STATEMENT FOR EDUCATIONAL INSTITUTIONS

    E-Print Network [OSTI]

    COST ACCOUNTING STANDARDS BOARD DISCLOSURE STATEMENT FOR EDUCATIONAL INSTITUTIONS CASB DS-2 #12;COST ACCOUNTING STANDARDS BOARD DISCLOSURE STATEMENT REQUIRED BY PUBLIC LAW 100-679 EDUCATIONAL INSTITUTIONS INDEX GENERAL INSTRUCTIONS -- Continuation Sheet

  5. BBF RFC 106: A Standard Type IIS Syntax for Plants

    E-Print Network [OSTI]

    Rutten, Virginia

    2015-03-17

    Here we define a standard syntax for assembling standard parts for expression in plant cells, extensible to all other eukaryotes. Variations of the Type IIS mediated cloning method known as Golden Gate Cloning, most notably ...

  6. 2015 Semi Annual Report to Congress on Conservation Standards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Congress on Conservation Standards Activities of the U.S. Department of Energy 2015 Semi Annual Report to Congress on Conservation Standards Activities of the U.S....

  7. Ozone Standard Exceedance Days in the South San Joaquin Valley

    E-Print Network [OSTI]

    Jan de Leeuw; Shuojun Wang

    2011-01-01

    about the health e?ects of ozone. CES is looking at many8h national std. days OZONE STANDARDS F????? 2. Bakers?eld8h national std. days OZONE STANDARDS Time F????? 4. Shafter

  8. Ozone Standard Exceedance Days in the South San Joaquin Valley

    E-Print Network [OSTI]

    de Leeuw, Jan; Wang, Shuojun

    2007-01-01

    about the health e?ects of ozone. CES is looking at many8h national std. days OZONE STANDARDS F????? 2. Bakers?eld8h national std. days OZONE STANDARDS Time F????? 4. Shafter

  9. Standards as interdependent artifacts : the case of the Internet

    E-Print Network [OSTI]

    Hsieh, Mo-Han

    2008-01-01

    This thesis has explored a new idea: viewing standards as interdependent artifacts and studying them with network analysis tools. Using the set of Internet standards as an example, the research of this thesis includes the ...

  10. City Knowledge Patterns: A Standard for Smart City Knowledge Management

    E-Print Network [OSTI]

    Fox, Mark S.

    City Knowledge Patterns: A Standard for Smart City Knowledge Management by Nooshin Allahyari Allahyar #12;! ! ! ! ii! ! City Knowledge Patterns: A Standard for Smart City Knowledge Management Nooshin......................................................................................................... 21 ! 3 City Knowledge Pattern

  11. World Energy Use: ISO Standards that Can Help | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    World Energy Use: ISO Standards that Can Help World Energy Use: ISO Standards that Can Help This one-page flyer shows total world energy consumption of marketed energy by economic...

  12. Policy and IT Standards Development Process Development ApprovalInitiation

    E-Print Network [OSTI]

    New Mexico, University of

    Policy and IT Standards Development Process Development ApprovalInitiation Main Campus Health Sciences Audit Academic, Technology, Project, Legal or Administrative Need IT Standard or UNM Policy? Policy Office convenes committee, vetting process with stakeholders and groups Campus Executives, Regents

  13. Software Maintainability Improvement: Integrating Standards and Models William C. Chu,

    E-Print Network [OSTI]

    Chung, Yeh-Ching

    Software Maintainability Improvement: Integrating Standards and Models William C. Chu, Dpt Science and Engineering, Southeast University, China National Key Laboratory of Software Engineering, Wuhan University, China Abstract Software standards are highly recommended because they promise faster

  14. Hydrogen Codes and Standards National Renewable Energy Laboratory

    E-Print Network [OSTI]

    Officials Code Administration (BOCA), the International Conference of Building Officials (ICBOHydrogen Codes and Standards James Ohi National Renewable Energy Laboratory 1617 Cole Blvd. Golden, CO 80401 Background The development and promulgation of codes and standards are essential if hydrogen

  15. German GIS/LIS Standards (91-24)

    E-Print Network [OSTI]

    Kuhn, Werner; Petersohn, Fritz K.

    1991-01-01

    Dipl. Ing. Paeslack, Head of GIS Marketing University ofInformation and Analysis German GIS/LIS Standards by: WernerTECHNICAL PAPER 91-24 GERMAN GIS/LIS STANDARDS By Werner

  16. Comments on the Joint Proposed Rulemaking to Establish Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards

    E-Print Network [OSTI]

    Wenzel, Thomas P

    2010-01-01

    on occupant safety than fuel economy standards that arethe automobile fuel economy standards program, NHTSA docketCorporate Average Fuel Economy Standards Docket No. NHTSA–

  17. International standards for stream ciphers: A progress report

    E-Print Network [OSTI]

    Mitchell, Chris

    reasons. As a result, the only standards covering stream ciphers (apart from the CTR, OFB and CFB block

  18. Hydrogen Vehicle and Infrastructure Codes and Standards Citations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    This document lists codes and standards typically used for U.S. hydrogen vehicle and infrastructure projects.

  19. Biodiesel Vehicle and Infrastructure Codes and Standards Citations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    This document lists codes and standards typically used for U.S. biodiesel vehicle and infrastructure projects.

  20. Natural Gas Vehicle and Infrastructure Codes and Standards Citations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    This document lists codes and standards typically used for U.S. natural gas vehicle and infrastructure projects.