National Library of Energy BETA

Sample records for dupont acquired conoco

  1. Dupont Fuel Cells | Open Energy Information

    Open Energy Info (EERE)

    Dupont Fuel Cells Jump to: navigation, search Name: Dupont Fuel Cells Place: Wilmington, Delaware Zip: DE 19880-0 Product: A subsidiary of Dupont which specializes in fuel cell...

  2. DuPont Biofuels | Open Energy Information

    Open Energy Info (EERE)

    Biofuels Jump to: navigation, search Name: DuPont Biofuels Place: Wilmington, Delaware Zip: 19898 Product: Biofuel technology development subsidiary of DuPont. Co-developing...

  3. EA-336-A ConocoPhillips Company | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-336-A ConocoPhillips Company Order authorizing ConocoPhillips to export electric energy to Mexico. EA-336-A ConocoPhillips (MX).pdf (999.54 KB) More Documents & Publications ...

  4. EA-336 ConocoPhillips Company | Department of Energy

    Energy Savers [EERE]

    & Publications EA-336-A ConocoPhillips Company Application to Export Electric Energy OE Docket No. EA-336-A ConocoPhillips Company ConocoPhillips Company - FE Dkt. - 15-130-LNG

  5. Applications attract DuPont

    SciTech Connect (OSTI)

    Rotman, D.

    1996-08-07

    Scientists at DuPont say they have demonstrated the first chemical processing application for high-temperature superconducting (HTS) magnets. DuPont says the work, which uses a HTS magnet to separate mineral contaminants from kaolin, points to the feasibility of a range of HTS applications in industrial processing, including those involving polymerization. DuPont`s success comes after 10 years of work to commercialize high-temperature superconductors. And while superconductors have lost much of their luster since the late 1980s, the company says it is still bullish on their prospects. {open_quotes}At the moment, there`s no real market for superconductors,{close_quotes} says Alan Lauder, general manager/superconductivity. But, he says, several potentially lucrative applications could be commercialized within the next several years.

  6. DuPont hikes butanediol

    SciTech Connect (OSTI)

    Morris, G.D.L.

    1997-05-14

    Butanediol (BDO) and its derivatives continue to be strong, a positive sign for the many companies planning expansions. DuPont - one of only two global producers not planning capacity additions - has announced that it will discontinue all off-schedule pricing for BDO and two important derivatives, tetrahydrofuran (THF) and polytetramethylene ether glycol (PTMEG). DuPont`s list prices are $1.00/lb fob for BDO, about $1.40/lb for THF, and $2.00/lb for PTMEG. The price adjustment is effective this month or as contracts allow.

  7. ConocoPhillips Gas Hydrate Production Test

    SciTech Connect (OSTI)

    Schoderbek, David; Farrell, Helen; Howard, James; Raterman, Kevin; Silpngarmlert, Suntichai; Martin, Kenneth; Smith, Bruce; Klein, Perry

    2013-06-30

    Work began on the ConocoPhillips Gas Hydrates Production Test (DOE award number DE-NT0006553) on October 1, 2008. This final report summarizes the entire project from January 1, 2011 to June 30, 2013.

  8. ConocoPhillips Alaska Natural Gas Corp. (ConocoPhillips)- EXPORT TO CANADA- FE DKT. 15-149-LNG

    Broader source: Energy.gov [DOE]

    The Office of Fossil Energy gives notice of receipt of an Application filed September 28, 2015, by ConocoPhillips Alaska Natural Gas Corp. (ConocoPhillips), seeking a long-term multi-contract...

  9. DuPont | Open Energy Information

    Open Energy Info (EERE)

    Zip: 19898 Product: US holding company; manufacturer of tedlar films used as a material for TPT backsheet in PV module production. Website: www2.dupont.com Coordinates:...

  10. DuPont Cellulosic Ethanol Biorefinery Opening

    Broader source: Energy.gov [DOE]

    The DuPont cellulosic ethanol facility, opening in Nevada, Iowa, on October 30, will be the largest cellulosic ethanol plant in the world. The U.S. Department of Energy Bioenergy Technologies Office Director, Jonathan Male, alongside senior government officials, DuPont leaders and staff, and local farmers will attend the grand opening ceremony and plant tour.

  11. DuPont Danisco Cellulosic Ethanol | Open Energy Information

    Open Energy Info (EERE)

    Danisco Cellulosic Ethanol Jump to: navigation, search Name: DuPont Danisco Cellulosic Ethanol Place: Itasca, Illinois Zip: 60143 Product: DuPont Danisco Cellulosic Ethanol is a...

  12. DuPont Apollo | Open Energy Information

    Open Energy Info (EERE)

    Kong-based thin-film PV module manufacturer that provides solar energy solutions by doing research and development on PV technology and system. References: DuPont Apollo1 This...

  13. ConocoPhillips Company (Illinois) | Open Energy Information

    Open Energy Info (EERE)

    search Name: ConocoPhillips Company Place: Illinois Phone Number: (800) 927-9801 Outage Hotline: (800) 927-9801 References: EIA Form EIA-861 Final Data File for 2010 -...

  14. DOE - Office of Legacy Management -- Conoco Conquista Site - 031

    Office of Legacy Management (LM)

    Conoco Conquista Site - 031 FUSRAP Considered Sites Site: Conoco Conquista Site (031) Active UMTRCA Title II site; when complete, site will be managed by LM Designated Name: Not Designated under FUSRAP Alternate Name: Conquista, TX, Disposal Site Location: Conquista, Texas Evaluation Year: Not considered for FUSRAP - in another program Site Operations: Disposal site Site Disposition: Remediation under UMTRCA Title II - site not ready to transition Radioactive Materials Handled: Yes Primary

  15. DuPont Chemical Vapor Technical Report

    SciTech Connect (OSTI)

    MOORE, T.L.

    2003-10-03

    DuPont Safety Resources was tasked with reviewing the current chemical vapor control practices and providing preventive recommendations on best commercial techniques to control worker exposures. The increased focus of the tank closure project to meet the 2024 Tri-Party Agreement (TPA) milestones has surfaced concerns among some CH2MHill employees and other interested parties. CH2MHill is committed to providing a safe working environment for employees and desires to safely manage the tank farm operations using appropriate control measures. To address worker concerns, CH2MHill has chartered a ''Chemical Vapors Project'' to integrate the activities of multiple CH2MHill project teams, and solicit the expertise of external resources, including an independent Industrial Hygiene expert panel, a communications consultant, and DuPont Safety Resources. Over a three-month time period, DuPont worked with CH2MHill ESH&Q, Industrial Hygiene, Engineering, and the independent expert panel to perform the assessment. The process included overview presentations, formal interviews, informal discussions, documentation review, and literature review. DuPont Safety Resources concluded that it is highly unlikely that workers in the tank farms are exposed to chemicals above established standards. Additionally, the conventional and radiological chemistry is understood, the inherent chemical hazards are known, and the risk associated with chemical vapor exposure is properly managed. The assessment highlighted management's commitment to addressing chemical vapor hazards and controlling the associated risks. Additionally, we found the Industrial Hygiene staff to be technically competent and well motivated. The tank characterization data resides in a comprehensive database containing the tank chemical compositions and relevant airborne concentrations.

  16. Application to Export Electric Energy OE Docket No. EA-336-A ConocoPhillips

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Company | Department of Energy 6-A ConocoPhillips Company Application to Export Electric Energy OE Docket No. EA-336-A ConocoPhillips Company Application from ConocoPhillips Company to export electric energy to Mexico. EA-336-A ConocoPhillips (MX).pdf (509.51 KB) More Documents & Publications EA-336-A ConocoPhillips Company EA-336 ConocoPhillips Company Application to Export Electric Energy OE Docket No. EA-387 Energia Renovable S.C, LLC

  17. E I DuPont De Nemours & Co | Open Energy Information

    Open Energy Info (EERE)

    E I DuPont De Nemours & Co Jump to: navigation, search Name: E I DuPont De Nemours & Co Place: Tennessee Website: www.dupont.com Twitter: @dupontnews Facebook: https:...

  18. ConocoPhillips Sweeny IGCC/CCS Project

    SciTech Connect (OSTI)

    Paul Talarico; Charles Sugg; Thomas Hren; Lauri Branch; Joseph Garcia; Alan Rezigh; Michelle Pittenger; Kathleen Bower; Jonathan Philley; Michael Culligan; Jeremy Maslen; Michele Woods; Kevin Elm

    2010-06-16

    Under its Industrial Carbon Capture and Sequestration (ICCS) Program, the United States (U.S.) Department of Energy (DOE) selected ConocoPhillips Company (ConocoPhillips) to receive funding through the American Recovery and Reinvestment Act (ARRA) of 2009 for the proposed Sweeny Integrated Gasification Combined Cycle (IGCC)/Carbon Capture and Storage (CCS) Project (Project) to be located in Brazoria County, Texas. Under the program, the DOE is partnering with industry to demonstrate the commercial viability and operational readiness of technologies that would capture carbon dioxide (CO{sub 2}) emissions from industrial sources and either sequester those emissions, or beneficially reuse them. The primary objective of the proposed Project was to demonstrate the efficacy of advanced technologies that capture CO{sub 2} from a large industrial source and store the CO{sub 2} in underground formations, while achieving a successful business venture for the entity (entities) involved. The Project would capture 85% of the CO{sub 2} produced from a petroleum coke (petcoke) fed, 703 MWnet (1,000 MWgross) IGCC power plant, using the ConocoPhillips (COP) proprietary and commercially proven E-Gas{trademark} gasification technology, at the existing 247,000 barrel per day COP Sweeny Refinery. In addition, a number of other commercially available technologies would be integrated into a conventional IGCC Plant in a unique, efficient, and reliable design that would capture CO{sub 2}. The primary destination for the CO{sub 2} would be a depleted natural gas field suitable for CO{sub 2} storage ('Storage Facility'). COP would also develop commercial options to sell a portion of the IGCC Plant's CO{sub 2} output to the growing Gulf Coast enhanced oil recovery (EOR) market. The IGCC Plant would produce electric power for sale in the Electric Reliability Council of Texas Houston Zone. The existing refinery effluent water would be treated and reused to fulfill all process water needs. The

  19. DuPont Technology Breaks Away From Glass

    Broader source: Energy.gov [DOE]

    Delaware-based DuPont is working to develop ultra-thin moisture protective films for photovoltaic panels — so thin they’re about 1,000 times thinner than a human hair.

  20. ConocoPhillips Company - FE Dkt. - 15-130-LNG | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ConocoPhillips Company - FE Dkt. - 15-130-LNG ConocoPhillips Company - FE Dkt. - 15-130-LNG The Office of Fossil Energy gives notice of receipt of an Application filed August 27, 2015, by ConocoPhillips Company (ConocoPhillips), requesting blanket authorization to export liquefied natural gas (LNG) that previously had been imported into the United States from foreign sources in an amount up to the equivalent of 500 billion cubic feet (Bcf) of natural gas for a period of twenty-five months

  1. Jump start: DuPont exports its energy management program

    SciTech Connect (OSTI)

    1994-11-23

    In August 1993, DuPont launched its innovative Jump Start program, which called for managers in its 25 largest plants to carry out a 120-day crash effort to find ways to reduce energy use at their facilities. The effort produced ideas that will result in $21.5 million in energy savings over six years, exceeding DuPont`s target. It also kicked off a longer-term program the company hopes will cut as much as $300 million, or 15% from energy bills through 2000.

  2. E I DuPont De Nemours & Co (Texas) | Open Energy Information

    Open Energy Info (EERE)

    E I DuPont De Nemours & Co (Texas) Jump to: navigation, search Name: E I DuPont De Nemours & Co Place: Texas References: EIA Form EIA-861 Final Data File for 2010 - File220101...

  3. DuPont's Journey to Build a Global Cellulosic BioFuel Business...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DuPont's Journey to Build a Global Cellulosic BioFuel Business Enterprise DuPont's Journey to Build a Global Cellulosic BioFuel Business Enterprise Plenary I: Progress in Advanced ...

  4. NREL, ConocoPhillips, Iowa State to Cooperate on Biofuels Research - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL NREL, ConocoPhillips, Iowa State to Cooperate on Biofuels Research March 31, 2008 The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has reached a Memorandum of Understanding with ConocoPhillips and Iowa State University to identify promising cellulosic biomass conversion technologies over the near, mid- and long-term. The collaboration will bring three independently established programs together to help identify the most efficient and cost-effective

  5. Group NPDES stormwater permit application: The Conoco experience

    SciTech Connect (OSTI)

    Holler, J.D. )

    1993-01-01

    The US Environmental Protection Agency (USEPA) has reported that stormwater runoff is a major cause of pollution and use impairment to waters of the nation. Diffuse pollution sources (stormwater runoff) are increasingly important as controls for industrial process dischargers. On November 16, 1990 the Federal Clean Water Act National Pollutant Discharge Elimination System (NPDES) rules governing the discharge of stormwater were published (56 FR 40948). These rules potentially affect every type of business enterprise conducting work associated with industrial activity.'' Dischargers of stormwater associated with industrial activity ar required to either seek coverage under a federal or state general permit using notice of intent, apply for an individual permit, or apply for a permit through a two-part group application process. Conoco, Inc. Supply and Transportation (S and T) elected the latter alternative to attempt to comply with these new evolving complex, broad-ranging permitting requirements. This paper discusses specific details of S and T's strategy, BMP designs, data acquisition activities, monitoring results, as well as economic impacts on the corporation as a result of storm water permit requirements. S and T operates approximately 170 unique wholly and jointly owned petroleum product storage and transport facilities across the nation. Approximately one-third of these facilities were subject to stormwater permit application requirements.

  6. Margins for Profit, Not Error: Corporate Energy Management at DuPont

    SciTech Connect (OSTI)

    2010-06-25

    Alliance to Save Energy case study on corporate energy management at DuPont sponsored by the U.S. Department of Energy Industrial Technologies Program.

  7. DuPont's Journey to Build a Global Cellulosic BioFuel Business...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... All rights reserved 5 AG & NUTRITION INDUSTRIAL BIOSCIENCES ADVANCED ... All rights reserved DuPont Feedstock Collection Program: Contracting with more than 500 local farmers to ...

  8. Application to Export Electric Energy OE Docket No. EA-336-A ConocoPhillips Company: Federal Register Notice, Volume 78, No. 33- Feb. 19, 2013

    Broader source: Energy.gov [DOE]

    Application from ConocoPhillips Company to export electric energy to Mexico.  Federal Register Notice.

  9. DuPont extends CFC production after EPA warns of scarcity

    SciTech Connect (OSTI)

    Kirschner, E.

    1994-01-05

    DuPont reversed its voluntary commitment to phase out CFC production at the end of 1994 to prevent a possible shortage for automotive air conditioning repairs. In a December letter, the US EPA asked Dupont to continue producing its full 1995 allowance of 76 million tons of CFC-12 under the Montreal Protocol.

  10. Closing the gap: DuPont`s response to the 1991 industrial power benchmarking study

    SciTech Connect (OSTI)

    Bailey, W.F.

    1996-12-31

    In 1991, DuPont benchmarked its industrial power facilities against other industrial and independent power producers, identified key areas of weakness and developed a blueprint for change to improve its energy competitiveness. Since then, efforts have been undertaken to address the weaknesses identified in the benchmarking study and to capitalize on strengths in DuPont`s various industrial power operations. This paper provides an update to the DuPont Industrial Power Benchmarking Study and describes major focus areas such as competitive electricity sourcing, control technology, performance assessment tools and internal networking efforts.

  11. Energy Secretary Chu to Tour DuPont Clean Energy Innovation Facilities

    Broader source: Energy.gov [DOE]

    WASHINGTON – Tomorrow, Wednesday, May 23, 2012, U.S. Energy Secretary Steven Chu will visit DuPont in Wilmington, Delaware, where he will tour the company’s clean energy research and development...

  12. Outgassing rate of Reemay Spunbonded Polyester and DuPont Double Aluminized Mylar

    SciTech Connect (OSTI)

    Todd, R.J.; Pate, D.; Welch, K.M.

    1993-08-01

    This paper presents the outgassing rates of two commercially available multi-layer insulation (MLI) materials commonly used in cryogenic applications. Both Reemay Spunbonded Polyester and DuPont Double Aluminized Mylar (DAM) were studied for outgassing species and respective rates, and the total amount of outgassed material. Measurements were made using a Fixed Aperture Technique. A sample was pumped on through an aperture of known size with a turbomolecular pump. Pressure vs. time was plotted for both Reemay and DAM, as well as the baseline system, and data conveniently extrapolated to {approx}1,000 hrs. A quadrupole residual gas analyzer was used to measure the outgassing species.

  13. DuPont Displays Develops Low-Cost Method of Printing OLED Panels

    Office of Energy Efficiency and Renewable Energy (EERE)

    DuPont Displays Inc. (DDI) has developed a novel way of printing color-tunable OLED lighting panels that keeps manufacturing costs low. The method involves processing the organic layers from solution, with most of the process steps taking place under atmospheric conditions rather than in a high vacuum. Industry-standard slot-coating methods are used in conjunction with nozzle printing—in which the solutions of organic materials are continuously jetted through an array of nozzles moving at high speed—allowing the light-emitting materials to be spatially patterned.

  14. Conoco's new approach to drill site construction in difficult, remote, swamp and jungle terrain Irian Jaya, Indonesia

    SciTech Connect (OSTI)

    Roodriguez, F.H.

    1984-02-01

    In October 1982, Conoco Irian Jaya as operator: and partners: Pertamina, Inpex Bintuni Limited, and Moeco Irian Jaya Company, mobilized construction equipment from Singapore to the KBS ''A'' contract area in Irian Jaya, Indonesia for the purpose of constructing a base camp and drill three exploratory sites. What made this construction effort different from others previously used in Irian Jaya; was that it incorporated several new and unique features, namely: a turnkey approach to construction; that is Conoco providing complete set of specifications and conditions with contractor assuming risks for a lump sum payment; special equipment designed by contractor for Irian Jaya operations; an incentive to co pensate or penalize contractor for helicopter hours flown below or above a predetermined number; structural steel pile platform designs for two swamp locations (Ayot and Aum), as opposed to the more conventional corduroy timber log-plank arrangement; and drilling rig pads designed for specific heli-rig with limited extra space. All work was successfully completed within the time frame stipulated in the contract, that is five months from the time the contractor was notified to begin mobilization of equipment, materials and personnel.

  15. Quantifying Contaminant Mass for the Feasibility Study of the DuPont Chambers Works FUSRAP Site - 13510

    SciTech Connect (OSTI)

    Young, Carl; Rahman, Mahmudur; Johnson, Ann; Owe, Stephan

    2013-07-01

    The U.S. Army Corps of Engineers (USACE) - Philadelphia District is conducting an environmental restoration at the DuPont Chambers Works in Deepwater, New Jersey under the Formerly Utilized Sites Remedial Action Program (FUSRAP). Discrete locations are contaminated with natural uranium, thorium-230 and radium-226. The USACE is proposing a preferred remedial alternative consisting of excavation and offsite disposal to address soil contamination followed by monitored natural attenuation to address residual groundwater contamination. Methods were developed to quantify the error associated with contaminant volume estimates and use mass balance calculations of the uranium plume to estimate the removal efficiency of the proposed alternative. During the remedial investigation, the USACE collected approximately 500 soil samples at various depths. As the first step of contaminant mass estimation, soil analytical data was segmented into several depth intervals. Second, using contouring software, analytical data for each depth interval was contoured to determine lateral extent of contamination. Six different contouring algorithms were used to generate alternative interpretations of the lateral extent of the soil contamination. Finally, geographical information system software was used to produce a three dimensional model in order to present both lateral and vertical extent of the soil contamination and to estimate the volume of impacted soil for each depth interval. The average soil volume from all six contouring methods was used to determine the estimated volume of impacted soil. This method also allowed an estimate of a standard deviation of the waste volume estimate. It was determined that the margin of error for the method was plus or minus 17% of the waste volume, which is within the acceptable construction contingency for cost estimation. USACE collected approximately 190 groundwater samples from 40 monitor wells. It is expected that excavation and disposal of

  16. Acquiring Property - SRSCRO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How To Acquire Available DOE Property The excess property listed on this SRSCRO web page is available during a 30-day period to local businesses, municipalities, or non-profits creating/retaining jobs in the five-county SRSCRO region or for non-profit organizations providing services to residents affected by SRS downsizing. The client will be responsible for all transportation, storage, or other related costs for the requested items. Fill out the appropriate form (Non-profit or Local business).

  17. Consolidated Online Data Management Strategy in Support of Environmental Remediation Activities at the Dupont Chambers Works Formerly Utilized Sites Remedial Action Program (Fusrap) Site

    SciTech Connect (OSTI)

    Nelson, K.A.; Desai, N.B.; Samus, J.E.; Bock, G.O.

    2007-07-01

    The U.S. Army Corps of Engineers (USACE) has developed and implemented an innovative online data management application in support of site characterization and remediation activities at the DuPont Chambers Works Formerly Utilized Sites Remedial Action Program (FUSRAP) Site. The password-protected, web-based application was implemented to centralize project data, facilitate project communications, and provide a large and diverse group of project team members with access to the data and analytical tools they need to efficiently and effectively manage the ongoing characterization and remediation efforts. Centralizing resources using the online application and web-based strategy streamlines data access and communications, allowing the team to effectively keep the project on track while reducing the costs associated with data requests, data duplication, document review and retrieval, software requirements, and lapses in communication or data transfer. (authors)

  18. Industrial hygiene walk-through survey report of E. I. Dupont de Nemours and Company, Inc. , Chocolate Bayou Plant, Alvin, Texas

    SciTech Connect (OSTI)

    Fajen, J.M.

    1985-05-01

    A walkthrough survey of EI duPont deNemours and Company, Incorporated, Alvin, Texas was conducted in November, 1984. The purpose of the survey was to obtain information on the 1,3-butadiene monomer manufacturing process and the potential for exposure. The facility manufactured a crude product stream containing 1,3-butadiene as a coproduct of its ethylene process. The crude was refined to a 99.5% 1,3-butadiene product. The refining process occurred in a closed system, tightly maintained for economic, fire, and health-hazard reasons. The product was transferred by way of a pipeline to storage spheres for later transport off site. The facility used an open-loop cylinder (bomb) technique for quality control sampling. All pumps were equipped with single mechanical seals, which were in the process of being replaced by tandem seals. Since 1962, the facility had experienced process changes and three changes of ownership. Because of these changes, records from previous owners of industrial hygiene monitoring were not available. Job titles identified as having potential exposure were processors, wage employee supervisors, production engineers, and laboratory technicians. The author concludes that a closed-loop manual quality-control sampling system should be installed to reduce exposure from this source.

  19. Field project to obtain pressure core, wireline log, and production test data for evaluation of CO/sub 2/ flooding potential. Conoco MCA unit well No. 358, Maljamar Field, Lea County, New Mexico. Final report

    SciTech Connect (OSTI)

    Swift, T.E.; Kumar, R.M.; Marlow, R.E.; Wilhelm, M.H.

    1982-08-01

    Field operations, which were conducted as a cooperative effort between Conoco and Gruy Federal, began on January 16, 1980 when the well was spudded. The well was drilled to 3692 feet, and 18 cores recovered in 18 core-barrel runs (144 feet). Upon completion of the coring phase, the hole was drilled to a total depth of 4150 feet and a complete suite of geophysical logs was run. Logging was then followed by completion and testing by Concoco. Core porosities agreed well with computed log porosities. Core water saturation and computed log porosities agree fairly well from 3692 to 3712 feet, poorly from 3712 to 3820 feet and in a general way from 4035 to 4107 feet. Computer log analysis techniques did not improve the agreement of log versus core derived water saturations. However, both core and log analysis indicated the ninth zone had the highest residual hydrocarbon saturations. Residual oil saturation were 259 STB/acre-ft for the 4035 - 4055 feet interval, and 150 STB/acre-ft for the 3692 - 3718 feet interval. Nine BOPD was produced from the 4035 - 4055 feet interval and no oil was produced from 3692 to 3718 feet interval, qualitatively confirming the relative oil saturations. The low oil production in the zone from 4022 to 4055 and the lack of production from 3692 to 3718 feet indicated the zone to be at or near residual waterflood conditions as determined by log analysis. 68 figures, 11 tables.

  20. ConocoPhillips Company | Open Energy Information

    Open Energy Info (EERE)

    R Activity Generation Yes Activity Buying Transmission Yes Activity Wholesale Marketing Yes Activity Retail Marketing Yes This article is a stub. You can help OpenEI by...

  1. EA-336_ConocoPhillips_MX.pdf

    Office of Environmental Management (EM)

  2. ConocoPhillips | Open Energy Information

    Open Energy Info (EERE)

    Place: Houston, TX Website: www.conocophillips.com References: NREL News Release: Biofuels Research1 Information About Partnership with NREL Partnership with NREL Yes...

  3. Energy Department Policy on Acquiring Tribal Renewable Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Policy on Acquiring Tribal Renewable Energy Products Energy Department Policy on Acquiring Tribal Renewable Energy Products As part of the Department of Energy's ...

  4. Acquire CoOmmodities Easily Card

    Energy Science and Technology Software Center (OSTI)

    1998-05-29

    Acquire Commodities Easily Card (AceCard) provides an automated end-user method to distribute company credit card charges to internal charge numbers. AceCard will allow cardholders to record card purchases in an on-line order log, enter multiple account distributions per order that can be posted to the General Ledger, track orders, and receipt information, and provide a variety of cardholder and administrative reports. Please note: Customers must contact Ed Soler (423)-576-6151, Lockheed Martin Energy Systems, for helpmore » with the installation of the package. The fee for this installation help will be coordinated by the customer and Lockheed Martin and is in addition to cost of the package from ESTSC. Customers should contact Sandy Presley (423)-576-4708 for user help.« less

  5. NREL Acquires Fuel Cell Hybrid Vehicles from Toyota to Support...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Acquires Fuel Cell Hybrid Vehicles from Toyota to Support Hydrogen Infrastructure, Production, and Vehicle Performance Studies January 28, 2013 The U.S. Department of Energy's ...

  6. CRISPR--a widespread system that provides acquired resistance...

    Office of Scientific and Technical Information (OSTI)

    phages in bacteria and archaea. Citation Details In-Document Search Title: CRISPR--a widespread system that provides acquired resistance against phages in bacteria and archaea. ...

  7. Mineral Leasing Act for Acquired Lands of 1947 | Open Energy...

    Open Energy Info (EERE)

    of the Mineral Leasing Act and the authority of the Secretary of the Interior over oil and gas operations to federal "acquired lands." References Mineral Leasing Act for...

  8. Wind Technology Testing Center Acquires New Blade Fatigue Test System |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Acquires New Blade Fatigue Test System Wind Technology Testing Center Acquires New Blade Fatigue Test System August 1, 2013 - 4:33pm Addthis This is an excerpt from the Second Quarter 2013 edition of the Wind Program R&D Newsletter. The Wind Technology Testing Center (WTTC) in Boston, Massachusetts, recently acquired a significant piece of testing equipment needed to offer its industry partners a full state-of-the-art suite of wind turbine blade certification tests.

  9. EA-336-A ConocoPhillips (MX).pdf

    Office of Environmental Management (EM)

  10. ConocoPhillips Company (Montana) | Open Energy Information

    Open Energy Info (EERE)

    Phone Number: 281-293-1000 Website: www.conocophillips.com Twitter: @conocophillips Facebook: https:www.facebook.comconocophillips Outage Hotline: 281-293-1000 References:...

  11. DOE - Office of Legacy Management -- Conoco Conquista Site -...

    Office of Legacy Management (LM)

    Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials ... After the owner completes U. S. Nuclear Regulatory Commission license termination the ...

  12. Small UAV-Acquired, High-resolution, Georeferenced Still Imagery

    SciTech Connect (OSTI)

    Ryan Hruska

    2005-09-01

    Currently, small Unmanned Aerial Vehicles (UAVs) are primarily used for capturing and down-linking real-time video. To date, their role as a low-cost airborne platform for capturing high-resolution, georeferenced still imagery has not been fully utilized. On-going work within the Unmanned Vehicle Systems Program at the Idaho National Laboratory (INL) is attempting to exploit this small UAV-acquired, still imagery potential. Initially, a UAV-based still imagery work flow model was developed that includes initial UAV mission planning, sensor selection, UAV/sensor integration, and imagery collection, processing, and analysis. Components to support each stage of the work flow are also being developed. Critical to use of acquired still imagery is the ability to detect changes between images of the same area over time. To enhance the analysts’ change detection ability, a UAV-specific, GIS-based change detection system called SADI or System for Analyzing Differences in Imagery is under development. This paper will discuss the associated challenges and approaches to collecting still imagery with small UAVs. Additionally, specific components of the developed work flow system will be described and graphically illustrated using varied examples of small UAV-acquired still imagery.

  13. Manhattan Project: DuPont and Hanford, Hanford Engineer Works...

    Office of Scientific and Technical Information (OSTI)

    ... Of the possible sites available, none had a better combination of isolation, long construction season, and abundant water for hydroelectric power than those found along the ...

  14. Results from tests of DuPont crossflow filter

    SciTech Connect (OSTI)

    Steimke, J.L.

    2000-05-05

    Crossflow filtration will be used to filter radioactive waste slurry as part of the Late Wash Process.

  15. EA-0513: Approaches for Acquiring Energy Savings in Commercial Sector Buildings, Bonneville Power Administration

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of a proposal for DOE's Bonneville Power Administration to use several diverse approaches to purchase or acquire energy savings from commercial sector...

  16. Hanford Tank Initiative (HTI) & Acquire Commercial Technology for Retrieval Report & Database

    SciTech Connect (OSTI)

    SEDERBURG, J. P

    2000-08-31

    The data base is an annotated bibliography of technology evaluations and demonstrations conducted in previous years by the Hanford Tank Initiative (HTI) and the Acquire Commercial Technology for Retrieval (ACTR) programs.

  17. Du you any one can comment on where to study and how to acquire...

    Open Energy Info (EERE)

    comment on where to study and how to acquire the LEED CERTIFICATION FOR INDIVIDUALS & BUILDINGS? Home > Groups > OpenEI Community Central LEED GA LEED AP - BD & C LEED AP - O & M...

  18. Method and system for calibrating acquired spectra for use in spectral analysis

    DOE Patents [OSTI]

    Reber, Edward L.; Rohde, Kenneth W.; Blackwood, Larry G.

    2010-09-14

    A method for calibrating acquired spectra for use in spectral analysis includes performing Gaussian peak fitting to spectra acquired by a plurality of NaI detectors to define peak regions. A Na and annihilation doublet may be located among the peak regions. A predetermined energy level may be applied to one of the peaks in the doublet and a location of a hydrogen peak may be predicted based on the location of at least one of the peaks of the doublet. Control systems for calibrating spectra are also disclosed.

  19. A review of acquired thermotolerance, heat shock proteins, and molecular chaperones in archaea

    SciTech Connect (OSTI)

    Trent, J.D.

    1996-05-01

    Acquired thermotolerance, the associated synthesis of heat-shock proteins (HSPs) under stress conditions, and the role of HSPs as molecular chaperones under normal growth conditions have been studied extensively in eukaryotes and bacteria, whereas research in these areas in archaea is only beginning. All organisms have evolved a variety of strategies for coping with high-temperature stress, and among these strategies is the increased synthesis of HSPs. The facts that both high temperatures and chemical stresses induce the HSPs and that some of the HSPs recognize and bind to unfolded proteins in vitro have led to the theory that the function of HSPs is to prevent protein aggregation in vivo. The facts that some HSPs are abundant under normal growth conditions and that they assist in protein folding in vitro have led to the theory that they assist protein folding in vivo; in this role, they are referred to as molecular chaperones. The limited research on acquired thermotolerance, HSPs, and molecular chaperones in archaea, particularly the hyperthermophilic archaea, suggests that these extremophiles provide a new perspective in these areas of research, both because they are members of a separate phylogenetic domain and because they have evolved to live under extreme conditions.

  20. DuPont's Cellulosic Ethanol Grand Opening Marks a Milestone for...

    Broader source: Energy.gov (indexed) [DOE]

    ... Advanced biofuels are an important part of meeting national goals to reduce imports of ... partnership approach to help enable private industry to commercialize advanced biofuels. ...

  1. SRL history, Volume 4, E.I. DuPont Nemours and Co. Inc.

    SciTech Connect (OSTI)

    1980-04-01

    This volume summarizes general information on personnel, safety, security, and service at the Savannah River Laboratory.

  2. A Review of Acquired Thermotolerance, Heat Shock Proteins, and Molecular Chaperones in Archaea: Heat Shock in Archaea

    DOE R&D Accomplishments [OSTI]

    Trent, J. D.

    1996-02-09

    Acquired thermotolerance, the associated synthesis of heat-shock proteins (HSPs) under stress conditions, and the role of HSPs as molecular chaperones under normal growth conditions have been studied extensively in eukaryotes and bacteria, whereas research in these areas in archaea is only beginning. All organisms have evolved a variety of strategies for coping with high-temperature stress, and among these strategies is the increased synthesis of HSPs. The facts that both high temperatures and chemical stresses induce the HSPs and that some of the HSPs recognize and bind to unfolded proteins in vitro have led to the theory that the function of HSPs is to prevent protein aggregation in vivo. The facts that some HSPs are abundant under normal growth conditions and that they assist in protein folding in vitro have led to the theory that they assist protein folding in vivo; in this role, they are referred to as molecular chaperones. The limited research on acquired thermotolerance, HSPs, and molecular chaperones in archaea, particularly the hyperthermophilic archaea, suggests that these extremophiles provide a new perspective in these areas of research, both because they are members of a separate phylogenetic domain and because they have evolved to live under extreme conditions.

  3. Data Overview for Sensor Fish Samples Acquired at Ice Harbor, John Day, and Bonneville II Dams in 2005, 2006, and 2007

    SciTech Connect (OSTI)

    Carlson, Thomas J.; Duncan, Joanne P.; Deng, Zhiqun

    2008-03-12

    The purpose of this work was to acquire Sensor Fish data on turbine passage at Bonneville II, John Day, and Ice Harbor dams for later analysis and use. The original data sets have been entered into a database and are being maintained by Pacific Northwest National Laboratory pending delivery to the U.S. Army Corps of Engineers when requested. This report provides documentation for the data sets acquired and details about the operations of the Sensor Fish and interpretation of Sensor Fish data that will be necessary for later use of the acquired data. A limited review of the acquired data was conducted to assess its quality and to extract information that might prove useful to its later use.

  4. Stigma models: Testing hypotheses of how images of Nevada are acquired and values are attached to them

    SciTech Connect (OSTI)

    Jenkins-Smith, H.C.

    1994-12-01

    This report analyzes data from surveys on the effects that images associated with nuclear power and waste (i.e., nuclear images) have on people`s preference to vacation in Nevada. The analysis was stimulated by a model of imagery and stigma which assumes that information about a potentially hazardous facility generates signals that elicit negative images about the place in which it is located. Individuals give these images negative values (valences) that lessen their desire to vacation, relocate, or retire in that place. The model has been used to argue that the proposed Yucca Mountain high-level nuclear waste repository could elicit images of nuclear waste that would stigmatize Nevada and thus impose substantial economic losses there. This report proposes a revised model that assumes that the acquisition and valuation of images depend on individuals` ideological and cultural predispositions and that the ways in which new images will affect their preferences and behavior partly depend on these predispositions. The report tests these hypotheses: (1) individuals with distinct cultural and ideological predispositions have different propensities for acquiring nuclear images, (2) these people attach different valences to these images, (3) the variations in these valences are important, and (4) the valences of the different categories of images within an individual`s image sets for a place correlate very well. The analysis largely confirms these hypotheses, indicating that the stigma model should be revised to (1) consider the relevant ideological and cultural predispositions of the people who will potentially acquire and attach value to the image, (2) specify the kinds of images that previously attracted people to the host state, and (3) consider interactions between the old and potential new images of the place. 37 refs., 18 figs., 17 tabs.

  5. Longitudinal, intermodality registration of quantitative breast PET and MRI data acquired before and during neoadjuvant chemotherapy: Preliminary results

    SciTech Connect (OSTI)

    Atuegwu, Nkiruka C.; Williams, Jason M.; Li, Xia; Arlinghaus, Lori R.; Abramson, Richard G.; Department of Radiology and Radiological Sciences, Vanderbilt University Medical Center, Nashville, Tennessee 37232-2675; Vanderbilt Ingram Cancer Center, Vanderbilt University Medical Center, Nashville, Tennessee 37232-6838 ; Chakravarthy, A. Bapsi; Abramson, Vandana G.; Yankeelov, Thomas E.

    2014-05-15

    Purpose: The authors propose a method whereby serially acquired DCE-MRI, DW-MRI, and FDG-PET breast data sets can be spatially and temporally coregistered to enable the comparison of changes in parameter maps at the voxel level. Methods: First, the authors aligned the PET and MR images at each time point rigidly and nonrigidly. To register the MR images longitudinally, the authors extended a nonrigid registration algorithm by including a tumor volume-preserving constraint in the cost function. After the PET images were aligned to the MR images at each time point, the authors then used the transformation obtained from the longitudinal registration of the MRI volumes to register the PET images longitudinally. The authors tested this approach on ten breast cancer patients by calculating a modified Dice similarity of tumor size between the PET and MR images as well as the bending energy and changes in the tumor volume after the application of the registration algorithm. Results: The median of the modified Dice in the registered PET and DCE-MRI data was 0.92. For the longitudinal registration, the median tumor volume change was −0.03% for the constrained algorithm, compared to −32.16% for the unconstrained registration algorithms (p = 8 × 10{sup −6}). The medians of the bending energy were 0.0092 and 0.0001 for the unconstrained and constrained algorithms, respectively (p = 2.84 × 10{sup −7}). Conclusions: The results indicate that the proposed method can accurately spatially align DCE-MRI, DW-MRI, and FDG-PET breast images acquired at different time points during therapy while preventing the tumor from being substantially distorted or compressed.

  6. THE SETTLERS PHOTOGRAPHIC COLLECTION 1894 - 1945 & THE DUPONT PHOTOGRAPHIC COLLECTION 1943 - 1945 BRINGING HISTORY TO LIFE IN SOUTH CENTRAL WASHINGTON

    SciTech Connect (OSTI)

    SHULTZ CR PH.D.

    2009-07-13

    Washington is called the 'Evergreen State' and it evokes images like this of lush forests, lakes and mountains. However, such images apply primarily to the half of the state west of the Cascade Mountains, where we are today. Eastern Washington state is quite a different matter and I want to draw your attention to a portion of Eastern Washington that is the focus ofmy presentation to you this morning. This image was taken on a part of the Department of Energy's Hanford Site, a 586-square mile government reservation, the second largest DOE facility in the nation . Here you can see where I am talking about, roughly 220 miles southeast of Seattle and about the same distance northeast of Portland.

  7. Real-time quadrupole mass spectrometer analysis of gas in boreholefluid samples acquired using the U-Tube sampling methodology

    SciTech Connect (OSTI)

    Freifeld, Barry M.; Trautz, Robert C.

    2006-01-11

    Sampling of fluids in deep boreholes is challenging becauseof the necessity to minimize external contamination and maintain sampleintegrity during recovery. The U-tube sampling methodology was developedto collect large volume, multiphase samples at in situ pressures. As apermanent or semi-permanent installation, the U-tube can be used forrapidly acquiring multiple samples or it may be installed for long-termmonitoring applications. The U-tube was first deployed in Liberty County,TX to monitor crosswell CO2 injection as part of the Frio CO2sequestration experiment. Analysis of gases (dissolved or separate phase)was performed in the field using a quadrupole mass spectrometer, whichserved as the basis for determining the arrival of the CO2 plume. Thepresence of oxygen and argon in elevated concentrations, along withreduced methane concentration, indicate sample alteration caused by theintroduction of surface fluids during borehole completion. Despiteproducing the well to eliminate non-native fluids, measurementsdemonstrate that contamination persists until the immiscible CO2injection swept formation fluid into the observationwellbore.

  8. Microsoft PowerPoint - 060414_INSIC_DS2_Roadmap_Riedel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... TORAY INDUSTRIES VEECO INSTRUMENTS VEECO INSTRUMENTS TEIJIN TEIJIN - - DUPONT FILMS DUPONT FILMS * * ADVANCED MICROSENSORS ADVANCED MICROSENSORS * * HITACHI GLOBAL STORAGE ...

  9. Targeting glucosylceramide synthase induction of cell surface globotriaosylceramide (Gb3) in acquired cisplatin-resistance of lung cancer and malignant pleural mesothelioma cells

    SciTech Connect (OSTI)

    Tyler, Andreas; Johansson, Anders; Karlsson, Terese; Gudey, Shyam Kumar; Brännström, Thomas; Grankvist, Kjell; Behnam-Motlagh, Parviz

    2015-08-01

    Background: Acquired resistance to cisplatin treatment is a caveat when treating patients with non-small cell lung cancer (NSCLC) and malignant pleural mesothelioma (MPM). Ceramide increases in response to chemotherapy, leading to proliferation arrest and apoptosis. However, a tumour stress activation of glucosylceramide synthase (GCS) follows to eliminate ceramide by formation of glycosphingolipids (GSLs) such as globotriaosylceramide (Gb3), the functional receptor of verotoxin-1. Ceramide elimination enhances cell proliferation and apoptosis blockade, thus stimulating tumor progression. GSLs transactivate multidrug resistance 1/P-glycoprotein (MDR1) and multidrug resistance-associated protein 1 (MRP1) expression which further prevents ceramide accumulation and stimulates drug efflux. We investigated the expression of Gb3, MDR1 and MRP1 in NSCLC and MPM cells with acquired cisplatin resistance, and if GCS activity or MDR1 pump inhibitors would reduce their expression and reverse cisplatin-resistance. Methods: Cell surface expression of Gb3, MDR1 and MRP1 and intracellular expression of MDR1 and MRP1 was analyzed by flow cytometry and confocal microscopy on P31 MPM and H1299 NSCLC cells and subline cells with acquired cisplatin resistance. The effect of GCS inhibitor PPMP and MDR1 pump inhibitor cyclosporin A for 72 h on expression and cisplatin cytotoxicity was tested. Results: The cisplatin-resistant cells expressed increased cell surface Gb3. Cell surface Gb3 expression of resistant cells was annihilated by PPMP whereas cyclosporin A decreased Gb3 and MDR1 expression in H1299 cells. No decrease of MDR1 by PPMP was noted in using flow cytometry, whereas a decrease of MDR1 in H1299 and H1299res was indicated with confocal microscopy. No certain co-localization of Gb3 and MDR1 was noted. PPMP, but not cyclosporin A, potentiated cisplatin cytotoxicity in all cells. Conclusions: Cell surface Gb3 expression is a likely tumour biomarker for acquired cisplatin

  10. Acquiring and Positioning Human Resources

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-09-06

    To establish requirements and responsibilities when sending employees on details outside the Department, determining probationary periods for managers and supervisors, providing part-time career employment, conducting reductions in force, promoting and placing candidates in the competitive service, and conducting some other personnel actions. Admin Chg 1, dated 11-21-2003, supersedes DOE O 320.1.

  11. Acquiring and Positioning Human Resources

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-09-06

    To establish requirements and responsibilities when sending employees on details outside the Department, determining probationary periods for managers and supervisors, providing part-time career employment, conducting reductions in force, promoting and placing candidates in the competitive service, and conducting some other personnel actions. Cancels DOE O 3300.3 and DOE O 3335.1C.

  12. Enhancing the quality of radiographic images acquired with point-like gamma-ray sources through correction of the beam divergence and attenuation

    SciTech Connect (OSTI)

    Silvani, M. I.; Almeida, G. L.; Lopes, R. T.

    2014-11-11

    Radiographic images acquired with point-like gamma-ray sources exhibit a desirable low penumbra effects specially when positioned far away from the set object-detector. Such an arrangement frequently is not affordable due to the limited flux provided by a distant source. A closer source, however, has two main drawbacks, namely the degradation of the spatial resolution - as actual sources are only approximately punctual - and the non-homogeneity of the beam hitting the detector, which creates a false attenuation map of the object being inspected. This non-homogeneity is caused by the beam divergence itself and by the different thicknesses traversed the beam even if the object were an homogeneous flat plate. In this work, radiographic images of objects with different geometries, such as flat plates and pipes have undergone a correction of beam divergence and attenuation addressing the experimental verification of the capability and soundness of an algorithm formerly developed to generate and process synthetic images. The impact of other parameters, including source-detector gap, attenuation coefficient, ratio defective-to-main hull thickness and counting statistics have been assessed for specifically tailored test-objects aiming at the evaluation of the ability of the proposed method to deal with different boundary conditions. All experiments have been carried out with an X-ray sensitive Imaging Plate and reactor-produced {sup 198}Au and {sup 165}Dy sources. The results have been compared with other technique showing a better capability to correct the attenuation map of inspected objects unveiling their inner structure otherwise concealed by the poor contrast caused by the beam divergence and attenuation, in particular for those regions far apart from the vertical of the source.

  13. TU-C-12A-07: Characterization of Longitudinal Reproducibility of Quantitative Diffusion Imaging Data Acquired with Four Different Protocols Using a Phantom

    SciTech Connect (OSTI)

    Li, X; Buzzelli, M; Randazzo, W; Yanasak, N

    2014-06-15

    Purpose: To characterize and compare the longitudinal reproducibility of diffusion imaging data acquired with four different protocols using a phantom. Methods: The Diffusive Quantitative Imaging Phantom (DQIP) was constructed using fifteen cylindrical compartments within a larger compartment, filled with deionized water doped with CuSO4 and NaCl. The smaller compartments contained arrays of hexagonal or cylindrical glass capillaries of varying inner diameters, for differing restraint of water diffusion. The sensitivity of diffusion imaging metrics to signal-to-noise ratio (SNR) was probed by doping compartments with differing ratios of deuterium oxide to H2O. A cork phantom enclosure was constructed to increase thermal stability during scanning and a cork holder was made to reproduce scanner positioning. Four different protocols of DWI (diffusion weighted imaging) and DTI (Diffusion tensor imaging) imaging were assembled on a GE Excite HDx 3.0T MRI scanner to collect imaging data over 9-10 days. Data was processed with in-house software created in Matlab to obtain fractional anisotropy (FA) and apparent diffusion coefficient (ADC) values. Results: All DTI and DWI sequences showed good longitudinal stability of mean FA and ADC values per compartment, exhibiting low standard deviation ∼9%. A t-test was performed to compare mean FA values from the DTI clinical protocol to those of the DTI special protocol, indicating significantly different values in the majority of compartments. ANOVA performed on ADC values for all DTI and DWI sequences also showed significantly different values in a majority of compartments. Conclusion: This work has the potential for quantifying systemic variations between diffusion imaging sequences from different platforms. Characterization of DWI and DTI performance were done over four sequences with predictable results. This data suggests that the DQIP phantom may be a reliable method of monitoring day-to-day and scan-to-scan variation in

  14. Delaware's At-large congressional district: Energy Resources...

    Open Energy Info (EERE)

    Advanced Biofuels LLC Citizenre Group Delmarva Power Light Company Delmarva Power DuPont DuPont Biofuels Dupont Fuel Cells Galt Power Inc GlobalWatt Inc Ion Power Inc Naveen...

  15. Building America Case Study: Measure Guideline: Guidance on Taped...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dupont, dupont.com CODE COMPLIANCE International Code Council Evaluation Service AC71-Acceptance Criteria for Foam Plastic Sheathing Panels Used as Water-Resistive Barriers The energy ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Resources, University of Washington Dupont, R. Ryan (R. Ryan Dupont) - Department of Civil and Environmental Engineering, Utah State University Go back to Individual Researchers ...

  17. Development of a Bulk-Format System to Harvest, Handle, Store...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laidig Systems, Inc., Marathon Equipment, Dupont-Danisco Cellulosic Ethanol, Deere & ... potential, and inhibitors will be determined by Dupont-Danisco Cellulosic Ethanol. ...

  18. Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Travel Consultants Databases Other Total DUPONT- HANFORD NON-CLASS ACTION Lawfirm: Corr, ... Travel Consultants Databases Other Total DUPONT- HANFORD NON-CLASS ACTION Lawfirrn: ...

  19. Laboratoire de Météorologie Dynamique, Ecole Polytechnique...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cedex, France * Corresponding author : jean-charles.dupont@lmd.polytechnique.fr 1. Introduction Jean-Charles Dupont *1 , Martial Haeffelin 2 2. Climatologies of AOT, IWV, SW ...

  20. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Submitter: Long, C. N., NOAA Global Monitoring DivisionCIRES Dupont, J., Laboratoire de ... Working Group(s): Radiative Processes Journal Reference: Dupont JC, M Haeffelin, and CN ...

  1. Field project to obtain pressure core, wireline log, and production test data for evaluation of CO/sub 2/ flooding potential, Conoco MCA unit well No. 358, Maljamar Field, Lea County, New Mexico

    SciTech Connect (OSTI)

    Swift, T.E.; Marlow, R.E.; Wilhelm, M.H.; Goodrich, J.H.; Kumar, R.M.

    1981-11-01

    This report describes part of the work done to fulfill a contract awarded to Gruy Federal, Inc., by the Department of Energy (DOE) on Feburary 12, 1979. The work includes pressure-coring and associated logging and testing programs to provide data on in-situ oil saturation, porosity and permeability distribution, and other data needed for resource characterization of fields and reservoirs in which CO/sub 2/ injection might have a high probability of success. This report details the second such project. Core porosities agreed well with computed log porosities. Core water saturation and computed log porosities agree fairly well from 3692 to 3712 feet, poorly from 3712 to 3820 feet and in a general way from 4035 to 4107 feet. Computer log analysis techniques incorporating the a, m, and n values obtained from Core Laboratories analysis did not improve the agreement of log versus core derived water saturations. However, both core and log analysis indicated the ninth zone had the highest residual hydrocarbon saturations and production data confirmed the validity of oil saturation determinations. Residual oil saturation, for the perforated and tested intervals were 259 STB/acre-ft for the interval from 4035 to 4055 feet, and 150 STB/acre-ft for the interval from 3692 to 3718 feet. Nine BOPD was produced from the interval 4035 to 4055 feet and no oil was produced from interval 3692 to 3718 feet, qualitatively confirming the relative oil saturations as calculated. The low oil production in the zone from 4022 to 4055 and the lack of production from 3692 to 3718 feet indicated the zone to be at or near residual waterflood conditions as determined by log analysis. This project demonstrates the usefulness of integrating pressure core, log, and production data to realistically evaluate a reservoir for carbon dioxide flood.

  2. EERE Success Story-Silicon Ink Technology Offers Path to Higher

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency Solar Cells at Lower Cost | Department of Energy Silicon Ink Technology Offers Path to Higher Efficiency Solar Cells at Lower Cost EERE Success Story-Silicon Ink Technology Offers Path to Higher Efficiency Solar Cells at Lower Cost April 18, 2013 - 12:00am Addthis EERE Success Story—Silicon Ink Technology Offers Path to Higher Efficiency Solar Cells at Lower Cost Partnering with Sunnyvale-based Innovalight, which was acquired by DuPont in July 2011, EERE supported the

  3. Morphological characterization of O-rings from the GCEP long-term test program. [Dupont 1141, 3M 4762 and 4768, and Parker V884-75 O-rings

    SciTech Connect (OSTI)

    Hughes, M.R.; Nolan, T.A.

    1984-07-30

    Based on the results of the morphological and structural characterizations reported herein the following conclusions have been reached. (1) O-rings of any of the four materials studied should last at least 10 years when employed in a standard static seal configuration utilizing a groove that holds the O-ring. (2) Such a static seal provides considerable protection from reaction. (3) The reaction of UF/sub 6/ with the O-ring material is the dominant degradation reaction; however there are effects on a least one compound that appear to be related to HF penetration into the O-ring matrix. The slow nature of the reaction of UF/sub 6/ with the flanged O-rings makes life projections quite difficult using any means. It would appear that one of the best methods for determining the life of these materials would be actual use combined with routine long-term inspection/sampling of a selected typical subset of O-rings. At GCEP conditions it would not be surprising to find the actual life of the O-rings is longer than any anticipated operation time of the plant facility. 16 figures, 1 table.

  4. CX-200001: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: Categorical Exclusion Determination CX-200001: Categorical Exclusion Determination Conoco Phillips Company CX(s) Applied: B5.7 Date: 11/16/2015 Location(s): Texas Offices(s): Fossil Energy, Natural Gas Regulation ConocoPhillips Company (ConocoPhillips), a Delaware corporation with its primary place of business in Houston, Texas, filed an application with the Office of Fossil Ene.rgy (FE) on August 27, 2015, seeking authorization to export previously imported liquefied natural gas (LNG) from

  5. Rio Blanco, Colorado, Site Fact Sheet

    Office of Legacy Management (LM)

    test in partnership with CER Geonuclear Corporation and Continental Oil Company (Conoco). ... The principal land uses in the area are livestock grazing and recreation; oil and gas ...

  6. Advance Patent Waiver W(A)2009-005

    Broader source: Energy.gov [DOE]

    This is a request by CONOCO PHILIPS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT0006553

  7. Application to Export Electric Energy OE Docket No. EA-336-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice, Volume 78, No. 33 - Feb. 19, 2013 Application from ConocoPhillips Company to export electric energy to Mexico. Federal Register Notice. PDF icon EA-336-A...

  8. Arctic Shield Field Campaign Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    District Seventeen, Coast Guard Air Station Kodiak, and Conoco Phillips. ... ARM staff at the NSA site applied repeatedly for the larger space, which extends over international ...

  9. U.S. Department of Energy Announces Expanded Partnership with...

    Energy Savers [EERE]

    ConocoPhillips, ExxonMobil Corporation, and Shell Oil Products US Electric utility industry - DTE Energy, Southern California Edison, and the Electric Power Research Institute ...

  10. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    DuPont, John" Name Name ORCID Search Authors Type: All BookMonograph ConferenceEvent ... Search for: All records CreatorsAuthors contains: "DuPont, John" Sort by Relevance ...

  11. NREL Industry Partners Move Cellulosic Ethanol Technology Forward...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory (NREL) and DuPont will be put to use to develop and commercialize technology to produce cellulosic ethanol from non-food sources. DuPont and its partner Genencor, ...

  12. Radiative Processes Working Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-C. Dupont, M. Haeffelin Institut Pierre et Simon Laplace, Ecole Polytechnique, France ... clouds from the dataset hazy cases Dupont et al., 2008 ShortWave Clear-Sky Model ...

  13. Header Sheet Doc ID Z OAK RIDGE NATIONAL LABORATORY M. E. Murray

    Office of Legacy Management (LM)

    INTERNET: r'0 March 31, 1997 Mr. Andrew Meloy DuPont Environmental Remediation Services DuPont Chambers Works Route 130, Anti-Knocks Building G Deepwater, New Jersey 08023 Dear Mr. ...

  14. Présentation PowerPoint

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    M. Haeffelin 1 , J-C. Dupont 1 , C. Long 2 1 Institut Pierre et Simon Laplace, Ecole ... Outline Outline 4 Aerosols Water Vapor Dupont and Haeffelin, JGR 2008 Ground Observatory ...

  15. OFFICE OF CIVIL RIGHTS NA-1.2 VIDEO LIBRARY Item Title

    National Nuclear Security Administration (NNSA)

    Dupont Company 2 Harassment Hurts: It's Personal 1 DVD 16 min 2009 ATS Media 3 Harassment Is .. (government version) 1 DVD 21 min 2005 Coastal Training Technologies Corp. A Dupont ...

  16. Research To Develop Both Fuels And Value-Added Chemicals From...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Laboratory (NREL) and DuPont today announced a joint research ... The 7.7 million Cooperative Research and Development Agreement calls for DuPont and NREL ...

  17. FORMERLY UTILIZED SITES REMEDIAL ACTION PROGRAM ELIMINATION REPORT

    Office of Legacy Management (LM)

    ... April 1944 DuPont placed an order with Pratt to finish rough-turned slugs by centerless grinding for the priority project to provide 48,000 unbonded Hanford slugs. DuPont also ...

  18. Fleming gift creates graduate fellowships in biomolecular engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a trip sponsored by Walter Carpenter, the DuPont executive for whom Carpenter Hall and ... father worked as an engineer at DuPont and whose family also had strong ties to Cornell. ...

  19. Waupaca County, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Dupont, Wisconsin Embarrass, Wisconsin Farmington, Wisconsin Fremont, Wisconsin Harrison, Wisconsin Helvetia, Wisconsin Iola, Wisconsin Larrabee, Wisconsin Lebanon, Wisconsin...

  20. SSRL BEAM PORT SCHEDULE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... BEAM LINE 8-2 Mar. 18, 2013 Mar. 19, 2013 Mar. 20, 2013 Mar. 21, 2013 Mar. 22, 2013 Mar. 23, 2013 Mar. 24, 2013 8053 D.NORDLUND 3769 S.Dupont 3769 S.Dupont 3769 S.Dupont 3731 ...

  1. Largest Cellulosic Ethanol Plant in the World Opens October 30 | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Largest Cellulosic Ethanol Plant in the World Opens October 30 Largest Cellulosic Ethanol Plant in the World Opens October 30 October 26, 2015 - 2:52pm Addthis The DuPont cellulosic ethanol facility in Nevada, Iowa, will produce about 30 million gallons of cellulosic ethanol per year. Photo courtesy of DuPont. The DuPont cellulosic ethanol facility in Nevada, Iowa, will produce about 30 million gallons of cellulosic ethanol per year. Photo courtesy of DuPont. The DuPont cellulosic

  2. Wind Technology Testing Center Acquires New Blade Fatigue Test...

    Broader source: Energy.gov (indexed) [DOE]

    Act, the WTTC is one of the largest blade test facilities in the world, testing some of ... tests on the larger blades at higher test frequencies-and thus shorter testing ...

  3. Summary Statistics for Homemade ?Play Dough? -- Data Acquired at LLNL

    SciTech Connect (OSTI)

    Kallman, J S; Morales, K E; Whipple, R E; Huber, R D; Martz, A; Brown, W D; Smith, J A; Schneberk, D J; Martz, Jr., H E; White, III, W T

    2010-03-11

    Using x-ray computerized tomography (CT), we have characterized the x-ray linear attenuation coefficients (LAC) of a homemade Play Dough{trademark}-like material, designated as PDA. Table 1 gives the first-order statistics for each of four CT measurements, estimated with a Gaussian kernel density estimator (KDE) analysis. The mean values of the LAC range from a high of about 2700 LMHU{sub D} 100kVp to a low of about 1200 LMHUD at 300kVp. The standard deviation of each measurement is around 10% to 15% of the mean. The entropy covers the range from 6.0 to 7.4. Ordinarily, we would model the LAC of the material and compare the modeled values to the measured values. In this case, however, we did not have the detailed chemical composition of the material and therefore did not model the LAC. Using a method recently proposed by Lawrence Livermore National Laboratory (LLNL), we estimate the value of the effective atomic number, Z{sub eff}, to be near 10. LLNL prepared about 50mL of the homemade 'Play Dough' in a polypropylene vial and firmly compressed it immediately prior to the x-ray measurements. We used the computer program IMGREC to reconstruct the CT images. The values of the key parameters used in the data capture and image reconstruction are given in this report. Additional details may be found in the experimental SOP and a separate document. To characterize the statistical distribution of LAC values in each CT image, we first isolated an 80% central-core segment of volume elements ('voxels') lying completely within the specimen, away from the walls of the polypropylene vial. All of the voxels within this central core, including those comprised of voids and inclusions, are included in the statistics. We then calculated the mean value, standard deviation and entropy for (a) the four image segments and for (b) their digital gradient images. (A digital gradient image of a given image was obtained by taking the absolute value of the difference between the initial image and that same image offset by one voxel horizontally, parallel to the rows of the x-ray detector array.) The statistics of the initial image of LAC values are called 'first order statistics;' those of the gradient image, 'second order statistics.'

  4. Summary Statistics for Fun Dough Data Acquired at LLNL

    SciTech Connect (OSTI)

    Kallman, J S; Morales, K E; Whipple, R E; Huber, R D; Brown, W D; Smith, J A; Schneberk, D J; Martz, Jr., H E; White, III, W T

    2010-03-11

    Using x-ray computerized tomography (CT), we have characterized the x-ray linear attenuation coefficients (LAC) of a Play Dough{trademark}-like product, Fun Dough{trademark}, designated as PD. Table 1 gives the first-order statistics for each of four CT measurements, estimated with a Gaussian kernel density estimator (KDE) analysis. The mean values of the LAC range from a high of about 2100 LMHU{sub D} at 100kVp to a low of about 1100 LMHU{sub D} at 300kVp. The standard deviation of each measurement is around 1% of the mean. The entropy covers the range from 3.9 to 4.6. Ordinarily, we would model the LAC of the material and compare the modeled values to the measured values. In this case, however, we did not have the composition of the material and therefore did not model the LAC. Using a method recently proposed by Lawrence Livermore National Laboratory (LLNL), we estimate the value of the effective atomic number, Z{sub eff}, to be near 8.5. LLNL prepared about 50mL of the Fun Dough{trademark} in a polypropylene vial and firmly compressed it immediately prior to the x-ray measurements. Still, layers can plainly be seen in the reconstructed images, indicating that the bulk density of the material in the container is affected by voids and bubbles. We used the computer program IMGREC to reconstruct the CT images. The values of the key parameters used in the data capture and image reconstruction are given in this report. Additional details may be found in the experimental SOP and a separate document. To characterize the statistical distribution of LAC values in each CT image, we first isolated an 80% central-core segment of volume elements ('voxels') lying completely within the specimen, away from the walls of the polypropylene vial. All of the voxels within this central core, including those comprised of voids and inclusions, are included in the statistics. We then calculated the mean value, standard deviation and entropy for (a) the four image segments and for (b) their digital gradient images. (A digital gradient image of a given image was obtained by taking the absolute value of the difference between the initial image and that same image offset by one voxel horizontally, parallel to the rows of the x-ray detector array.) The statistics of the initial image of LAC values are called 'first order statistics;' those of the gradient image, 'second order statistics.'

  5. SF 6110-AA Property Acquired_Fabricated for Sandia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    item andor separate component by affixing the Sandia furnished decal, steel stamping, etching, or other means. (5) Property Cost - Unit cost if item(s) are on a fixed price...

  6. Energy Department Policy on Acquiring Tribal Renewable Energy Products

    Office of Energy Efficiency and Renewable Energy (EERE)

    As part of the Department of Energy’s efforts to support tribal renewable energy production, Secretary Steven Chu has issued a policy statement and guidance to give preference to Indian Tribes when...

  7. BPA's Third-party Program for Acquiring and financing Transmission...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    payments are not an "all-in" cost of the related project. The exact extent of potential property tax liability is uncertain at this time. The costs of the master lease program...

  8. Audit of Proposal to Acquire Land at the Fernald Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... to the Department's real property acquisition process. ... all internal control deficiencies that may have existed. ... The Cincinnati Gas & Electric Company holds an easement ...

  9. Athens, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Ohio American Hydrogen Corporation Carbon Cycle Engineering Dovetail Solar and Wind DuPont Electronic Technologies, Inc. Global Cooling Inc. Panich + Noel Architects Panich,...

  10. A New Route to Nano Self-Assembly

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Japan). Research funding: Army Research Office; National Science Foundation; DuPont; 3M; Japan Ministry of Education, Science, Sports, and Culture; and the U.S....

  11. Building Media, Inc. (Du Pont) (Building America Retrofit Alliance...

    Open Energy Info (EERE)

    America Retrofit Alliance) Place: Wilmington, DE Website: www.prweb.comreleasesDuPont References: Building America Retrofit Alliance Press Release1 BMI Website2 DuPont...

  12. Itasca, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    6th congressional district.12 Registered Energy Companies in Itasca, Illinois DuPont Danisco Cellulosic Ethanol References US Census Bureau Incorporated place and...

  13. Athens County, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Ohio American Hydrogen Corporation Carbon Cycle Engineering Dovetail Solar and Wind DuPont Electronic Technologies, Inc. Global Cooling Inc. Panich + Noel Architects Panich,...

  14. Jefferson County, Indiana: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    4 Climate Zone Subtype A. Places in Jefferson County, Indiana Brooksburg, Indiana Dupont, Indiana Hanover, Indiana Madison, Indiana Retrieved from "http:en.openei.orgw...

  15. Race to Zero Competition Sponsorship | Department of Energy

    Energy Savers [EERE]

    The support of the 2016 sponsors helped make the Race to Zero event possible. American Chemistry Council - Spray Foam Coalition BASF DuPont Building Innovations NORESCO Owens ...

  16. Bioenergy Success Stories | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    EERE's bioenergy success stories below. November 30, 2015 The DuPont cellulosic ethanol facility in Nevada, Iowa, will produce about 30 million gallons of cellulosic ethanol...

  17. March 2016 Most Viewed Documents for Power Generation And Distribution...

    Office of Scientific and Technical Information (OSTI)

    Levy, Edward; Bilirgen, Harun; DuPont, John (2011) 162 Structural considerations for solar installers : an approach for small, simplified solar installations or retrofits. ...

  18. Advance Patent Waiver W(A)2008-012

    Broader source: Energy.gov [DOE]

    This is a request by DUPONT for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-07GOI7056

  19. EERE Success Story-Largest Cellulosic Ethanol Plant in the World...

    Office of Environmental Management (EM)

    In another area, NREL supported DuPont in developing a mild ammonia pretreatment process ... In total, DOE has contributed more than 51 million dollars to advance various ...

  20. Breakout Session: Bringing Solutions to the Solar Industry: Startups...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cheryl Martin Acting Director of ARPA-e Speakers: Dr. Thomas Earnest Global Market Development Manager, DuPont Photovoltaic Solutions Dr. Karina Edmonds Executive Director for ...

  1. Predicting sigma formation in mo-bearing stainless steels. (Conference...

    Office of Scientific and Technical Information (OSTI)

    Title: Predicting sigma formation in mo-bearing stainless steels. No abstract prepared. Authors: Perricone, Matthew ; Dupont, John Neuman ; Anderson, T. D. 1 ; Robino, Charles ...

  2. The Secretary of Energy

    Office of Legacy Management (LM)

    ... Louis Downtown Site' . . DuPont Maywood Wayne : . Middlesex Sampling Plant ' Ashland 1 ... Louis, Missouri Deepwater, New Jksey Haywood, New Jersey Wayne, New Jersey . Middlesex;.Ne...

  3. Energy At Work: Plant Expansion Creates Job Opportunities in...

    Broader source: Energy.gov (indexed) [DOE]

    What does this project do? DuPont's newly expanded solar manufacturing plant in Circleville, Ohio, produces thin film materials to strengthen the durability of solar panels. ...

  4. Biomass Deconstruction and Pretreatment | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Cargill Codexis DSM DuPont Ecopetrol Green Earth Institute Idaho National Laboratory JGC MBG Novozymes North Carolina State University Pacific Northwest National Laboratory Poet ...

  5. ARM Climate Research Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Special thanks to our VAP development team for providing timely and complete updates to the Engineering Change Orders and Engineering Work Orders, Dana Dupont and Rolanda Jundt, ...

  6. Molecular Foundry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Emeryville, CA. 1989 - 1991 Res. Scientist, New Technologies, Protos Corp. Emeryville, CA. 1984 (summer) DuPont Central Research, Wilmington, DE. 1983 (summer) Brookhaven National ...

  7. ARM Climate Research Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Special thanks to our VAP development team for providing timely and complete updates to the Engineering Change Orders and Engineering Work Orders, and to Dana Dupont and Rolanda ...

  8. Biochemical Process Development and Integration | Bioenergy ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Enzyme and Microbial Development Techno-Economic Analysis Sustainability Analysis Collaborators DuPont EcoPetrol Genomatica Japanese Gas Corporation Lygos Membrane Science, ...

  9. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In November 2012, ARM communications staff, Rolanda Jundt and Dana Dupont from Pacific Northwest National Laboratory, gathered ARM's education materials and participated in the ...

  10. Secretary Chu Announces 150 Students to Receive Graduate Fellowships...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBM Alexis Herman Former Secretary of Labor Chad Holliday, Jr. Former CEO of Dupont Michael McQuade Senior VP, United Technologies Corporation William Perry Former ...

  11. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blink, Harris Greenberg, Mark Sutton & Massimiliano Fratoni, LLNL Joe Carter & Mark Dupont, Savannah River Rob Howard, ORNL report-id SAND2011-6202 location SNL, Albuquerque, ...

  12. NREL Recognized by FLC for Technology Transfer Activities - News...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL has several industrial partnerships related to this technology, including a 7.7 million cooperative research and development agreement and license agreement with DuPont. The ...

  13. Annual Postdoctoral Research and Career Symposium | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cabot Microelectronics, Chicago Council on Science and Technology, Clean Energy Trust, DuPont, Dow, Euclid TechLabs, Exxon Mobil, GE Healthcare, GE Research, Illinois Science and ...

  14. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laura Riihimaki demonstrates an activity from one of ARM's lesson plans. On Tuesday, December 5, ARM Communications Team member Dana Dupont and ARM user Laura Riihimaki, a ...

  15. Long Range Interactions in Nanoscale Science (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    less + Show Author Affiliations DuPont Company National Institutes of Health Massachusetts Institute of Technology (MIT) Lehigh University, Bethlehem, PA Clemson University...

  16. VP 100: Growth in solar means growth in Ohio | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Growth in solar means growth in Ohio VP 100: Growth in solar means growth in Ohio October 6, 2010 - 10:57am Addthis DuPont is betting on major growth in the market for solar energy -- and therefore for its Tedlar film, a durable backing for silicon solar panels. | Photo Courtesy of DuPont DuPont is betting on major growth in the market for solar energy -- and therefore for its Tedlar film, a durable backing for silicon solar panels. | Photo Courtesy of DuPont Lorelei Laird Writer, Energy

  17. Application to Export Electric Energy OE Docket No. EA-336-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Application from ConocoPhillips Company to export electric energy to Mexico. PDF icon ... Application to Export Electric Energy OE Docket No. EA-387 Energia Renovable S.C, LLC

  18. ULTRA-DEEP WATER ADVISORY COMMITTEE FINDINGS AND

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Douglas J. Foster ConocoPhillips Mr. James D. Litton* Litton Consulting Group, Inc. Mr. D. Stephen Pye* Consultant Ms. Mary Jane Wilson* WZI Inc. Dr. Lesli Wood* Bureau of Economic ...

  19. Slide 1

    Broader source: Energy.gov (indexed) [DOE]

    ConocoPhillips test results and data analysis Brian J. Anderson Associate Professor, ... evaluate CO 2 CH 4 exchange * Short-term test to demonstrate concepts at larger-than-lab ...

  20. Technically Recoverable Shale Oil and Shale Gas Resources:

    U.S. Energy Information Administration (EIA) Indexed Site

    ... the La Luna-1 stratigraphic test in the MMVB later that year (results not disclosed). ... ConocoPhillips expects to drill its first exploration well to test the La Luna Shale in ...

  1. Office of Fossil Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Company ConocoPhillips Company Koch Supply & Trading, LP 13-97-LNG Brazil Excalibur Freeport, TX 2,727,940 12.19 S TOTAL Re-Exports of LNG 5,532,898 S - Represents ...

  2. U.S. Strategic Petroleum Reserve Historical O

    Broader source: Energy.gov (indexed) [DOE]

    ... Loaned 750,000 barrels of crude oil to ConocoPhilips and Citgo following the closure of the Calcasieu Ship Channel that cut off tanker deliveries to refiners near Lake ...

  3. DOE - Fossil Energy:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applications and LNG Applications (wcontracts) 2007 Docket No. Date Filed CTY Authorization Holder Application Link Ord. No. FE07-02-LNG 011007 JP ConocoPhillips Alaska Natural...

  4. CX-006821: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    ConocoPhillips CompanyCX(s) Applied: B5.7Date: 10/14/2011Location(s): Quintana Island, TexasOffice(s): Fossil Energy, NNSA-Headquarters

  5. Advanced composites enhance coiled tubing capabilities

    SciTech Connect (OSTI)

    Sas-Jaworsky, A.; Williams, J.G.

    1994-04-01

    From early coiled tubing (CT) use to recent operations, most concerns have been about tube damage from past service and remaining safe working life. Composite CT (CCT) is designed and constructed to exhibit unique anisotropic characteristics relative to steel or alternative isotropic materials that expand burst, collapse, tensile and compressive load performance capabilities. In 1988, Conoco Inc. began a development effort focused on using high-performance composite materials to meet numerous challenges associated with current and future oil and gas exploration and development. At that time, Conoco initiated a project to explore composite materials use for high-pressure, long-length, non-corroding tubulars with primary application as onshore water injection lines. In 1989, Conoco awarded a contract to AMAT a/s in Sandefjord, Norway to develop spoolable composite pipe for small diameter subsea lines. Concurrent with ongoing spoolable composite subsea lines, Conoco also began to explore high-performance CCT development in 1989.

  6. Statement from DOE's Chief Spokesperson Andrew Beck Regarding Delivery of Strategic Petroleum Reserve Oil

    Broader source: Energy.gov [DOE]

    WASHINGTON - The U.S. Department of Energy has agreed to deliver 200,000 barrels of emergency exchange oil from the Strategic Petroleum Reserve to ConocoPhillips Company's Wood River refinery along...

  7. Ramakrishnan_1984.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ram Shenoy About Us Ram Shenoy - Ram Shenoy Ram Shenoy was most recently the chief technology officer for ConocoPhillips. An electrical engineer by training, he has twenty years of oil and gas industry experience. Before taking on his current role at ConocoPhillips, Shenoy was vice president of research for Schlumberger Limited, responsible for all Schlumberger's corporate scientific research laboratories. In prior years, he held a series of marketing and technology management positions with

  8. CX-200006: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6: Categorical Exclusion Determination CX-200006: Categorical Exclusion Determination ConocoPhillips Alaska Natural Gas Corporation CX(s) Applied: B5.7 Date: 2/4/2016 Location(s): Other Offices(s): Fossil Energy, Natural Gas Regulation ConocoPhillips Alaska Natural Gas Corporation (CPANGC), a Delaware corporation with its primary place of business in Anchorage, Alaska, filed an application with the Office of Fossil Energy (FE) on September 28, 2015, seeking blanket authorization to export

  9. JM to Revise DOE O 320.1, Acquiring and Positioning Human Resources--Withdrawn

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-07-17

    Withdrawn 3-25-15. The revision will update the order to transfer the requirements of Chapter V, Merit Promotion and incorporate any other policies relating to staffing and internal placement that were absent in the previous DOE 320.1 Order into the proposed DOE Order 335.1 Merit Promotion Pl an and Internal Placement Order.

  10. System to acquire and monitor operating machinery positions for horizontal coke oven batteries

    SciTech Connect (OSTI)

    Bierbaum, D.; Teschner, W.

    1980-02-26

    In a horizontal coke oven battery with at least one coke receiving device movable along one longitudinal side of the battery and at least one coke driving device movable along an opposite longitudinal side of the battery, an apparatus is disclosed for determining the relative position of the coke receiving device with respect to the coke driving device and for activating the coke driving device when its position corresponds with that of the coke receiving device. A first wheel is mounted on the coke receiving device for rotation with the movement of the coke receiving device, a first angle encoder is connected to the first wheel for producing a first signal corresponding to the location of the first wheel and the position of the coke receiving device along the coke oven, and an input storage in the form of a magnetic disc is connected to the first angle encoder for recording and storing the signal. A second wheel is mounted on the coke driving device for rotation with the movement of the coke driving device and a second angle encoder is connected thereto for producing a second signal which corresponds to the rotation of the second wheel and the position of the coke driving device along the coke oven. A comparator is connected to the second signal encoder for receiving the second signal and a data link is provided between the comparator and the input storage of the coke receiving device so that the first signal from the coke receiving device can be impressed on the comparator. An activator is connected to the comparator for activating the coke driving device when the first signal corresponds to the second signal indicating a corresponding positional relationship between the coke receiving device and the coke driving device.

  11. Radiometric and geometric analysis of hyperspectral imagery acquired from an unmanned aerial vehicle

    SciTech Connect (OSTI)

    Hruska, Ryan; Mitchell, Jessica; Anderson, Matthew; Glenn, Nancy F.

    2012-09-17

    During the summer of 2010, an Unmanned Aerial Vehicle (UAV) hyperspectral in-flight calibration and characterization experiment of the Resonon PIKA II imaging spectrometer was conducted at the U.S. Department of Energy’s Idaho National Laboratory (INL) UAV Research Park. The purpose of the experiment was to validate the radiometric calibration of the spectrometer and determine the georegistration accuracy achievable from the on-board global positioning system (GPS) and inertial navigation sensors (INS) under operational conditions. In order for low-cost hyperspectral systems to compete with larger systems flown on manned aircraft, they must be able to collect data suitable for quantitative scientific analysis. The results of the in-flight calibration experiment indicate an absolute average agreement of 96.3%, 93.7% and 85.7% for calibration tarps of 56%, 24%, and 2.5% reflectivity, respectively. The achieved planimetric accuracy was 4.6 meters (based on RMSE).

  12. Radiometric and geometric analysis of hyperspectral imagery acquired from an unmanned aerial vehicle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hruska, Ryan; Mitchell, Jessica; Anderson, Matthew; Glenn, Nancy F.

    2012-09-17

    During the summer of 2010, an Unmanned Aerial Vehicle (UAV) hyperspectral in-flight calibration and characterization experiment of the Resonon PIKA II imaging spectrometer was conducted at the U.S. Department of Energy’s Idaho National Laboratory (INL) UAV Research Park. The purpose of the experiment was to validate the radiometric calibration of the spectrometer and determine the georegistration accuracy achievable from the on-board global positioning system (GPS) and inertial navigation sensors (INS) under operational conditions. In order for low-cost hyperspectral systems to compete with larger systems flown on manned aircraft, they must be able to collect data suitable for quantitative scientific analysis.more » The results of the in-flight calibration experiment indicate an absolute average agreement of 96.3%, 93.7% and 85.7% for calibration tarps of 56%, 24%, and 2.5% reflectivity, respectively. The achieved planimetric accuracy was 4.6 meters (based on RMSE).« less

  13. The digital optical module - How IceCube will acquire data

    SciTech Connect (OSTI)

    Stokstad, R.G.

    2003-01-09

    IceCube will be a km-scale neutrino detector consisting of 4800 optical modules (OMs) on 80 strings of 60 OMs each. The DAQ technology will have the following desirable features: (1) the robustness of copper cable between the OMs and the surface. (2) digitization and time-stamping of signals that are unattenuated and undispersed. (3) calibration methods (particularly for timing) appropriate for a large number of OMs. The PMT anode waveform is digitized and time-stamped in the OM. The time calibration procedure is both accurate and automatic. A system having these features has been tested in AMANDA. A prototype digital system consisting of 40 OMs was deployed in Jan., 2000. The principal components of the Digital Optical Module (DOM) signal processing circuitry are: the analog transient waveform digitizer (ATWD), a low-power custom integrated circuit that captures the waveform in 128 samples at a rate of {approx}500 Megasamples/s; an ADC operating at {approx}30 MS/s covering several microseconds; a FPGA that provides state control, time stamps events, handles communications, etc.; a low-power 32-bit ARM CPU with a real-time operating system. A 16.8 MHz oscillator, made by Toyocom, is free-running, very stable ({delta}f/f {approx} 5 {center_dot} 10{sup -11} over {approx} 5s) and provides clock signals to several components. Short (12 m) cables connecting adjacent modules enable a local time coincidence, which eliminates most of the {approx}1 kHz of dark noise pulses. A critical requirement is the ability to calibrate the DOM oscillator against a master clock at the surface. In essence, timing pulses sent in one direction at known time intervals can be used to determine relative frequency, and the round trip time of pulses sent in both directions can determine the offset. After receiving a timing pulse at the DOM and waiting for a short time, {delta}t, measured on the DOM clock, a pulse is sent from the DOM to the surface. The shapes of the pulses sent down and up are identical and are analyzed in the same way to determine the time mark. In this case, the times up and down are the same and are therefore equal to half the roundtrip time minus {delta}t=2. This calibration method is called Reciprocal Active Pulsing. Performing clock calibrations automatically every 5-10 seconds consumes negligible bandwidth. The rms resolution for timing pulses received at the DOM is 1.8 ns. The resolution for pulses sent upward is larger, viz., 2.8 ns, because of the larger ambient electrical noise in the DAQ electronics on the surface compared to that in a DOM. The systematic errors are estimated to be less than 5 ns. IceCube will have two DOMs per twisted pair cable. Eight DOMs will communicate with a HUB on surface. All communications after a HUB will be via Ethernet. Each string of 60 DOMs will have a CPU that time-orders hits and forms ''string triggers.'' Hits satisfying a global trigger will be built into events. A disk storage system will retain all events for several days (e.g., to search for Gamma-Ray Bursts) and an online cluster of CPU's will filter data for transmission via satellite to North America.

  14. Approaches for Acquiring Energy Savings in Commercial Sector Buildings : Environmental Assessment.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1991-09-01

    Bonneville has carefully considered the potential environmental impacts associated with installation of currently known Energy- efficient Conservation Measures (ECMs) in new and existing commercial buildings, and has implemented specific requirements to minimize those impacts. These Commercial Environmental Requirements would apply to the three proposed conservation approaches outlined in this environmental assessment. The cumulative energy savings from these proposed commercial programs will have a positive impact on the region. These savings will help reduce the region's dependence on other resource types needed to meet Bonneville's load requirements. However, the savings are not large enough to negate or replace other needed resources or other conservation programs. To summarize, the following environmental requirements have been incorporated in all BPA commercial conservation programs, including this proposal. Building owners are required to comply with all Federal, state, and local building and safety codes and environmental regulations. ASHRAE Standard 62-89 has been adopted by Bonneville as the required ventilation standard to improve indoor air quality in commercial buildings. Specific guidelines for installing HPS lighting indoors is provided to program participants. Guidance regarding disposal of fluorescent light ballasts which may contain PCBs is routinely provided to building owners. Bonneville will not fund removal and disposal of asbestos material. The use of urea formaldehyde foam insulation is not permitted in either new construction or in existing building retrofits. The use of toxic transfer fluids is not permitted in any ECM. All commercial buildings over 45 years old will be reviewed in accordance with Bonneville's PMOA with the Advisory Council on Historic Preservation and the State Historic Preservation Offices.

  15. Montana Tribes Realize Long-Held Vision of Acquiring Kerr Dam...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... people of the land in their language. "FERC's action is an honor to our people, who sacrificed so dearly in both the construction and acquisition of this facility," said ...

  16. WPN 13-4: Property Acquired Under the Weatherization Assistance Program |

    Broader source: Energy.gov (indexed) [DOE]

    Clarification of Average Cost Calculations | Department of Energy 1/31/12, Superseded by WPN 12-1 To issue grant guidance that further defines the allowable cost categories contained in calculating the "average cost per unit" allowable pursuant to 42 USC §6865(c)(1) and to emphasize consistency in applying the financial assistance rules set forth in 10 CFR Part 600 by Grantees and Subgrantees. WPN 11-01A: Program Year 2011 Weatherization Grant Guidance - Clarification of Average

  17. Acquired experience resulting from transforming a chemical installation into a nuclear one

    SciTech Connect (OSTI)

    Zamfirache, M.; Stefan, L.; Bornea, A.; Stefanescu, I.

    2015-03-15

    ICIT-Valcea has developed an experimental pilot-scale installation for tritium and deuterium separation. The main objective of this pilot was to demonstrate the water detritiation technology and to transfer this technology to the CANDU reactors of the Cernavoda nuclear power plant. The pilot-scale installation was initiated in 1992. The initial design and construction were performed similarly to chemical plants as the separation of isotopes was focused on only hydrogen and deuterium to assess feasibility. In a second phase we have begun to transform it into a nuclear facility with the aim of separating tritium. Moving to tritium separation has imposed a lot of changes. Changes consisted mainly of: -) re-design of the technological systems for nuclear material processing, applying specific codes and standards (ASME, Romanian nuclear specific pressure boundary prescriptions for code classification); -) design and implementation of new systems, classified as safety systems; -) re-design and implementation of command and control systems, complying with the requirements of reliability and maintenance required for the project promoted; -) revaluation of auxiliary systems (utilities, power supply); -) implementing radiation protection systems, including secondary barriers; -) implementing and maintaining environment operational program specific to the new nuclear plant; -) developing and conducting safety analyzes; and -) the production of specific documentation to obtain the necessary permits for construction, commissioning and operation of the plant.

  18. Analysis of Doppler Lidar Data Acquired During the Pentagon Shield Field Campaign

    SciTech Connect (OSTI)

    Newsom, Rob K.

    2011-04-14

    Observations from two coherent Doppler lidars deployed during the Pentagon Shield field campaign are analyzed in conjunction with other sensors to characterize the overall boundary-layer structure, and identify the dominant flow characteristics during the entire two-week field campaign. Convective boundary layer (CBL) heights and cloud base heights (CBH) are estimated from an analysis of the lidar signal-to-noise-ratio (SNR), and mean wind profiles are computed using a modified velocity-azimuth-display (VAD) algorithm. Three-dimensional wind field retrievals are computed from coordinated overlapping volume scans, and the results are analyzed by visualizing the flow in horizontal and vertical cross sections. The VAD winds show that southerly flows dominate during the two-week field campaign. Low-level jets (LLJ) were evident on all but two of the nights during the field campaign. The LLJs tended to form a couple hours after sunset and reach maximum strength between 03 and 07 UTC. The surface friction velocities show distinct local maxima during four nights when strong LLJs formed. Estimates of the convective boundary layer height and residual layer height are obtained through an analysis of the vertical gradient of the lidar signal-to-noise-ratio (SNR). Strong minimum in the SNR gradient often develops just above the surface after sunrise. This minimum is associated with the developing CBL, and increases rapidly during the early portion of the daytime period. On several days, this minimum continues to increase until about sunset. Secondary minima in the SNR gradient were also observed at higher altitudes, and are believed to be remnants of the CBL height from previous days, i.e. the residual layer height. The dual-Doppler analysis technique used in this study makes use of hourly averaged radial velocity data to produce three-dimensional grids of the horizontal velocity components, and the horizontal velocity variance. Visualization of horizontal and vertical cross sections of the dual-Doppler wind retrievals often indicated a jet-like flow feature over the Potomac River under southerly flow conditions. This linear flow feature is roughly aligned with the Potomac River corridor to the south of the confluence with the Anatostia River, and is most apparent at low levels (i.e. below ~150 m MSL). It is believed that this flow arises due to reduced drag over the water surface and when the large scale flow aligns with the Potomac River corridor. A so-called area-constrained VAD analysis generally confirmed the observations from the dual-Doppler analysis. When the large scale flow is southerly, wind speeds over the Potomac River are consistently larger than the at a site just to the west of the river for altitudes less than 100 m MSL. Above this level, the trend is somewhat less obvious. The data suggest that the depth of the wind speed maximum may be reduced by strong directional shear aloft.

  19. High Temperature Superconducting Reciprocating Magnetic Separator Final Report

    SciTech Connect (OSTI)

    James F. Maguire

    2008-06-05

    In 2001, under DOE's Superconductivity Partnership Initiative (SPI), E. I. du Pont de Nemours & Co. (Dupont) was awarded a cost-share contract to build a fully functional full-scale model high temperature superconducting reciprocating magnet unit specifically designed for the koalin clay industry. After competitive bidding, American Superconductor (AMSC) was selected to provide the coil for the magnet. Dupont performed the statement of work until September 2004, when it stopped work, with the concurrence of DOE, due to lack of federal funds. DOE had paid all invoices to that point, and Dupont had provided all cost share. At this same time, Dupont determined that this program did not fit with its corporate strategies and notified DOE that it was not interesting in resuming the program when funding became available. AMSC expressed interest in assuming performance of the Agreement to Dupont and DOE, and in March 2005, this project was transferred to AMSC by DOE amendment to the original contract and Novation Agreement between AMSC and Dupont. Design drawings and some hardware components and subassemblies were transferred to AMSC. However, no funding was obligated by DOE and AMSC never performed work on the project. This report contains a summary of the work performed by Dupont up to the September 04 timeframe.

  20. EERE Success Story-Largest Cellulosic Ethanol Plant in the World Opened

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in October | Department of Energy Largest Cellulosic Ethanol Plant in the World Opened in October EERE Success Story-Largest Cellulosic Ethanol Plant in the World Opened in October November 30, 2015 - 2:07pm Addthis The DuPont cellulosic ethanol facility in Nevada, Iowa, will produce about 30 million gallons of cellulosic ethanol per year. Photo courtesy of DuPont. The DuPont cellulosic ethanol facility in Nevada, Iowa, will produce about 30 million gallons of cellulosic ethanol per year.

  1. Proposals in for Czech firms; cooperation likely with eastern Germany

    SciTech Connect (OSTI)

    Alperowicz, N.

    1993-02-10

    Two Western groups - Shell and a consortium made up of Agip, Conoco, and Total - have offered to buy the refining operations of Chemopetrol Litvinov and Kaucuk Kralupy, both in the Czech republic. Meanwhile, Amoco, Neste, and PCD are looking at the possibility of acquiring some of the plastics plants at Litvinov. Amoco is interested in the polypropylene operations, Neste in polyethylene, and PCD in both. The two Czech firms are included in the second wave of privatization, which will begin in midyear. So far, there have been no offers for the 80,000-m.t./year polystyrene and 60,000-m.t./year styrene butadiene rubber operations belonging to Kralupy, although Atochem representatives recently visited the plants. Litvinov is carrying out revamping operations at its core unit, a 12-year-old, 450,000-m.t./year ethylene plant. The plant, currently running at 400,000 m.t./year, supplies downstream plants, Neratovice, and sells on the export markets. An existing ethylene pipeline between Litvinov and Bohlen in eastern Germany, which used to supply an average 100,000 m.t./year of ethylene to Bohen in exchange for naphtha, is virtually unused. One proposal involves reactivating this exchange to secure ethylene feedstock for plants in eastern Germany. According to some sources, a preliminary decision has been made to shut down the 100,000-m.t./year ethylene plant at Leuna and possibly to expand the Bohlen cracker by 100,000 m.t./year, to 400,000 m.t./year by the late 1990s.

  2. PROBING THE IGM/GALAXY CONNECTION. IV. THE LCO/WFCCD GALAXY SURVEY OF 20 FIELDS SURROUNDING UV-BRIGHT QUASARS

    SciTech Connect (OSTI)

    Prochaska, J. Xavier; Chen, H.-W.; Cooksey, K. L.; Mulchaey, J. S. E-mail: bjw@as.arizona.edu E-mail: kcooksey@space.mit.edu

    2011-04-01

    We publish the survey for galaxies in 20 fields containing ultraviolet bright quasars (with z{sub em} {approx} 0.1-0.5) that can be used to study the association between galaxies and absorption systems from the low-z intergalactic medium (IGM). The survey is magnitude limited (R {approx} 19.5 mag) and highly complete out to 10' from the quasar in each field. It was designed to detect dwarf galaxies (L {approx} 0.1L*) at an impact parameter {rho} {approx} 1 Mpc (z = 0.1) from a quasar. The complete sample (all 20 fields) includes R-band photometry for 84,718 sources and confirmed redshifts for 2800 sources. This includes 1198 galaxies with 0.005 < z < (z{sub em} - 0.01) at a median redshift of 0.18, which may associated with IGM absorption lines. All of the imaging was acquired with cameras on the Swope 40'' telescope and the spectra were obtained via slit mask observations using the WFCCD spectrograph on the Dupont 100'' telescope at Las Campanas Observatory. This paper describes the data reduction, imaging analysis, photometry, and spectral analysis of the survey. We tabulate the principal measurements for all sources in each field and provide the spectroscopic data set online.

  3. DOE and FreedomCAR and Fuel Partnership Analysis Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy - Washington, DC January 25, 2006 F FI IN NA AL L A AT TT TE EN ND DE EE ES S L LI IS ST T Name Company E-mail Rajesh Ahluwalia Argonne National Laboratory walia@anl.gov Arlene Anderson U.S. DOE-HFCIT Arlene.anderson@hq.doe.gov Jim Campbell Air Liquide Jim.Campbell@airliquide.com Ed Casey ConocoPhillips ed.casey@ConocoPhillips.com Tan-Ping Chen Nexant tpchen@nexant.com Keith Cole General Motors keith.cole@gm.com Peter Devlin U.S. DOE-HFCIT peter.devlin@ee.doe.gov Karl

  4. Manhattan Project: The Plutonium Path to the Bomb, 1942-1944

    Office of Scientific and Technical Information (OSTI)

    Production Reactor (Pile) Design, 1942 DuPont and Hanford, 1942 CP-1 Goes Critical, December 2, 1942 Seaborg and Plutonium Chemistry, 1942-1944 Final Reactor Design and X-10, ...

  5. D"E(:pa

    Office of Legacy Management (LM)

    JUN 4 1992 DATE: REPLY TO ATTN OF: EM-421 (W. A. Williams, 903-8149) SUBJECT: ... DuPont placed Purchase Order RPG-4018 l2 with this firm in May 1944 to machine unbonded ...

  6. 2014 EFRC NEES KICKOFF MEETING AGENDA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4:30pm LAB TOURS RUBLOFF ALD LAB, NISP LAB BY CUMINGS, GHODSSI MSAL BY KOSTAS (MSAL, MEMS SENSORS & ACTUATORS LAB) 5:30pm 7 O'CLOCK DINNER RESERVATION @ AGORA, DUPONT CIRCLE,...

  7. A pseudo binary y-Gd solidification diagram for Ni-Cr-Mo-Gd alloys...

    Office of Scientific and Technical Information (OSTI)

    Title: A pseudo binary y-Gd solidification diagram for Ni-Cr-Mo-Gd alloys. No abstract prepared. Authors: Dupont, John Neuman 1 ; Minicozzi, Michael J. 1 ; Robino, Charles ...

  8. The Influence of Gd and B on the Solidification and Weldability...

    Office of Scientific and Technical Information (OSTI)

    Title: The Influence of Gd and B on the Solidification and Weldability of a Ni-Cr-Mo Alloy. Abstract not provided. Authors: Robino, Charles V ; DuPont, John N ; Anderson, Timothy ...

  9. Building America Update - January 4, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    there: DateTimeLocation TitleSpeaker Summary Jan. 22-24; 3:15-4:00 PM each day DuPont Booth Home of the Future Sam Rashkin, U.S. Department of Energy The DOE Challenge ...

  10. Ohio's 6th congressional district: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    DuPont Electronic Technologies, Inc. Global Cooling Inc. McCarthy Systems Co. Michael Bradley Co. Michael Bradley Co.,Inc Morning Mist LLC Panich + Noel Architects Panich, Noel +...

  11. Industry Group Learns About Light Source Opportunities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Bay Area Photovoltaic Consortium-an industry-supported program that counts GE, DuPont, Bosch, and Corning among its members-is working with Berkeley Lab, SLAC, and other ...

  12. Molecular Engineering of Conjugated Polymers to Reach Higher...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    You joined the University of North Carolina at Chapel Hill as an Assistant Professor in Chemistry. He has been awarded the DuPont Young Professor Award (2008) and the NSF CAREER ...

  13. Yat-Chen Chou | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chou was one of the key researchers in the cooperative research and development agreement project with DuPont, working on the construction and improvement of a robust ethanologen ...

  14. A New Route to Nano Self-Assembly

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... National Science Foundation; DuPont; 3M; Japan Ministry of Education, Science, Sports, and Culture; and the U.S. Department of Energy, Office of Basic Energy Sciences (BES). ...

  15. SSRL Powder Diffraction Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Date: Wed., 21st Oct. 1998 Speakers: Apurva Mehta (SSRl) Dave Cox (NSLSBNL) Richard Harlow (E. I. DuPont de Nemours & Co.) Poul Norby (University of Aarhus) Larry Finger ...

  16. R&D 100 Awards Demonstrate Clean Energy Legacy - Continuum Magazine...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... In 2004, NREL's work to improve the enzymatic process with enzyme companies Novozymes Biotech, Inc. and Genencor International (now part of DuPont) won another R&D 100 Award. ...

  17. The Savannah River Site is owned by the U.S. Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Saldivar has 33 years of nuclearnon-nuclear experience at the Savannah River Site (SRS) and DuPont Petrochemicals working in the areas of Design Authority Engineering, Project ...

  18. Novel Biomass Conversion Process Results in Commercial Joint Venture; The Spectrum of Clean Energy Innovation (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    Fact sheet describing DuPont/NREL cooperative research and development agreement that resulted in biomass-to-ethanol conversion process used as a basis for DuPont Danisco Cellulosic Ethanol, LLC and cellulosic ethanol demonstration plant.

  19. Measurement of the production cross section for Z gamma to nu...

    Office of Scientific and Technical Information (OSTI)

    ... Di Marco41, M. Dobson, M. Dordevic, B. Dorney, T. du Pree, D. Duggan, M. Diinser, N. Dupont, A. Elliott-Peisert, G. Franzoni, J. Fulcher, W. Funk, D. Gigi, K. Gill, D. Giordano, ...

  20. E

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    She has industry experience with DuPont, TRW, Xerox, Coca-Cola Enterprises, and BAE Systems (formerly Lockheed Martin Sanders). Kim earned her MS in Mathematics and Computing from ...

  1. Dorothy Riehle Freedom

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in that year for the "DuPont- Hanford Non-Class Action," broken down by law firm, plus the cumulative legal costs (including the litigation database) since the case was filed. ...

  2. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Happy trails to Nancy - wherever they may lead Speaking of new staff, Dana Dupont recently joined the ARM Communications Team to help fill the gap left by Nancy and meet the ...

  3. Structuring Materials on Multiple Length Scales for Energy Application...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... He is the recipient of several awards, including a Merck Professorship in Chemistry, a 3M Faculty Grant, a Dupont Young Professor Grant, an NSF CAREER Award, a McKnight Land-Grant ...

  4. Five honored as LANL Fellows for 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Martin also is a consultant to DuPont. Bill Goddard (Caltech, NAS member) states that Martin "has proved to be a virtuoso in developing first principles quantum methods" and refers ...

  5. Search for supersymmetry in electroweak production with photons...

    Office of Scientific and Technical Information (OSTI)

    ... Di Marco43, M. Dobson, M. Dordevic, B. Dorney, T. du Pree, D. Duggan, M. Diinser, N. Dupont, A. Elliott-Peisert, G. Franzoni, J. Fulcher, W. Funk, D. Gigi, K. Gill, D. Giordano, ...

  6. Search for heavy resonances decaying to two Higgs bosons in final...

    Office of Scientific and Technical Information (OSTI)

    ... Di Marco42, M. Dobson, M. Dordevic, B. Dorney, T. du Pree, D. Duggan, M. Diinser, N. Dupont, A. Elliott-Peisert, G. Franzoni, J. Fulcher, W. Funk, D. Gigi, K. Gill, D. Giordano, ...

  7. Dust Defeats Germ-Killing Fabrics | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Michael Kelley, a joint Jefferson LabCollege of William & Mary researcher, was a member of a DuPont team that developed a germ-killing nylon by using ultraviolet light. In lab ...

  8. Staff > Center Alumni > The Energy Materials Center at Cornell

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Postdoc - Savannah River National Lab ttt45@cornell.edu List Image Giang Vo Research Investigator - Dupont gdv8@cornell.edu List Image Deli Wang Professor - Huazhong University of ...

  9. Microsoft Word - LM SMG Jan 2016 Update 18 Draft 12 no links...

    Energy Savers [EERE]

    ... LM Site Name Pre-LM Name Category Transferring Organization Regulatory Driver 1 Deepwater, NJ, Site DuPont Chambers Works 2 USACE FUSRAP 2 St. Louis, MO, Site St. Louis Downtown ...

  10. Governance & Advisory Boards - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mallouk is the Director of the Center for Solar Nanomaterials, the Evan Pugh Professor, and the DuPont Professor of Materials Chemistry and Physics and Professor of Biochemistry ...

  11. Most Viewed Documents for Power Generation and Distribution:...

    Office of Scientific and Technical Information (OSTI)

    Electrotek Concepts. (1995) 29 Recovery of Water from Boiler Flue Gas Using Condensing Heat Exchangers Levy, Edward; Bilirgen, Harun; DuPont, John (2011) 28 Micro-CHP Systems for ...

  12. A New Route to Nano Self-Assembly

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office; National Science Foundation; DuPont; 3M; Japan Ministry of Education, Science, Sports, and Culture; and the U.S. Department of Energy, Office of Basic Energy Sciences...

  13. 2010 New Fuel Cell Projects Meeting Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of PEM FC Membrane Electrode Randal Perry, DuPont Assemblies 4:20 Mixed Conducting Corrosion Resistant Materials Vijay Ramani, Illinois Institute of Technology 5:00 Concluding ...

  14. Most Viewed Documents for Power Generation and Distribution:...

    Office of Scientific and Technical Information (OSTI)

    DuPont, John (2011) 18 Wind power forecasting : state-of-the-art 2009. Monteiro, C.; ... Sciences; INESC Porto (2009) 17 Levelized Costs for Nuclear, Gas and Coal for Electricity, ...

  15. A Comparison of Key PV Backsheet and Module Properties from Fielded...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado DuPont's Journey to Build a Global Cellulosic BioFuel Business Enterprise Statistical and ...

  16. DuPont’s Journey to Build a Global Cellulosic BioFuel Business Enterprise

    Office of Energy Efficiency and Renewable Energy (EERE)

    Plenary I: Progress in Advanced Biofuels DuPont’s Journey to Build a Global Cellulosic BioFuel Business Enterprise William Provine, Director–Science and Technology External Affairs, DuPont

  17. Germ-Killing or Germ-Attracting? (Daily Press) | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fabric first researched by DuPont loses its effectiveness with just a simple coating of dust. The synthetic material was first considered for its germ-killing properties...

  18. STEAB January Meeting Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    JANUARY MEETING AGENDA January 13 - 14, 2015 Renaissance Washington DC Dupont Circle Hotel 1143 New Hampshire Ave, NW, Washington, DC 20037 DAY 1 January 13th 8:00 - 9:00 ...

  19. Making Biofuel From Corncobs and Switchgrass in Rural America | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Biofuel From Corncobs and Switchgrass in Rural America Making Biofuel From Corncobs and Switchgrass in Rural America June 11, 2010 - 4:48pm Addthis DuPont Danisco Cellulosic Ethanol (DDCE) opened a new biorefinery in Vonore, Tenn., last year. | Photo courtesy of DDCE DuPont Danisco Cellulosic Ethanol (DDCE) opened a new biorefinery in Vonore, Tenn., last year. | Photo courtesy of DDCE Lindsay Gsell Energy crops and agricultural residue, like corncobs and stover, are becoming part

  20. WABASH RIVER INTEGRATED METHANOL AND POWER PRODUCTION FROM CLEAN COAL TECHNOLOGIES (IMPPCCT)

    SciTech Connect (OSTI)

    Thomas Lynch

    2004-01-07

    The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is evaluating integrated electrical power generation and methanol production through clean coal technologies. The project is conducted by a multi-industry team lead previously by Gasification Engineering Corporation (GEC). The project is now under the leadership of ConocoPhillips Company (COP) after it acquired GEC and the E-Gas{trademark} gasification technology from Global Energy in July 2003. The Phase I of this project was supported by Air Products and Chemicals, Inc., Dow Chemical Company, Dow Corning Corporation, Methanex Corporation, and Siemens Westinghouse Power Corporation, while the Phase II is supported by Gas Technology Institute, TDA Research, Inc., and Nucon International, Inc. The two project phases planned for execution include: (1) Feasibility study and conceptual design for an integrated demonstration facility at Global Energy's existing Wabash River Energy Limited (WREL) plant in West Terre Haute, Indiana, and for a fence-line commercial embodiment plants (CEP) operated at Dow Chemical or Dow Corning chemical plant locations (2) Research, development, and testing (RD&T) to define any technology gaps or critical design and integration issues. The WREL facility was designed, constructed, and operated under a project selected and co-funded under the Round IV of the United States Department of Energy's (DOE's) Clean Coal Technology Program. In this project, coal and/or other solid fuel feedstocks are gasified in an oxygen-blown, entrained-flow gasifier with continuous slag removal and a dry particulate removal system. The resulting product synthesis gas is used to fuel a combustion turbine generator whose exhaust is integrated with a heat recovery steam generator to drive a refurbished steam turbine generator. The gasifier uses technology initially developed by The Dow Chemical Company (the Destec Gasification Process), and now acquired and

  1. Coal. [Great Plains Project

    SciTech Connect (OSTI)

    Not Available

    1981-03-01

    The status of various research projects related to coal is considered: gasification (approximately 30 processes) and in-situ gasification. Methanol production, retrofitting internal combustion engines to stratified charge engines, methanation (Conoco), direct reduction of iron ores, water resources, etc. Approximately 200 specific projects related to coal are considered with respect to present status. (LTN)

  2. OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

    SciTech Connect (OSTI)

    Arnis Judzis

    2002-10-01

    This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting July 2002 through September 2002. Even though we are awaiting the optimization portion of the testing program, accomplishments include the following: (1) Smith International agreed to participate in the DOE Mud Hammer program. (2) Smith International chromed collars for upcoming benchmark tests at TerraTek, now scheduled for 4Q 2002. (3) ConocoPhillips had a field trial of the Smith fluid hammer offshore Vietnam. The hammer functioned properly, though the well encountered hole conditions and reaming problems. ConocoPhillips plan another field trial as a result. (4) DOE/NETL extended the contract for the fluid hammer program to allow Novatek to ''optimize'' their much delayed tool to 2003 and to allow Smith International to add ''benchmarking'' tests in light of SDS Digger Tools' current financial inability to participate. (5) ConocoPhillips joined the Industry Advisors for the mud hammer program. (6) TerraTek acknowledges Smith International, BP America, PDVSA, and ConocoPhillips for cost-sharing the Smith benchmarking tests allowing extension of the contract to complete the optimizations.

  3. Prenatal cadmium exposure produces persistent changes to thymus and spleen cell phenotypic repertoire as well as the acquired immune response

    SciTech Connect (OSTI)

    Holskov, Ida; Elliott, Meenal; Hanson, Miranda L.; Schafer, Rosana [Department of Microbiology, Immunology and Cell Biology, West Virginia University School of Medicine, Morgantown, WV 26506 (United States)] [Department of Microbiology, Immunology and Cell Biology, West Virginia University School of Medicine, Morgantown, WV 26506 (United States); Barnett, John B., E-mail: jbarnett@hsc.wvu.edu [Department of Microbiology, Immunology and Cell Biology, West Virginia University School of Medicine, Morgantown, WV 26506 (United States); Mary Babb Randolph Cancer Center, West Virginia University School of Medicine, Morgantown, WV 26506 (United States)

    2012-12-01

    Cadmium (Cd) is a common environmental contaminant. Adult exposure to Cd alters the immune system, however, there are limited studies on the effects of prenatal exposure to Cd. Pregnant C57Bl/6 mice were exposed to an environmentally relevant dose of CdCl{sub 2} (10 ppm) and the effects on the immune system of the offspring were assessed at 20 weeks of age. Prenatal Cd exposure caused an increase in the percent of CD4{sup ?}CD8{sup ?}CD44{sup +}CD25{sup ?} (DN1) thymocytes in both sexes and a decrease in the percent of CD4{sup ?}CD8{sup ?}CD44{sup ?}CD25{sup +} (DN3) thymocytes in females. Females had an increase in the percent of splenic CD4{sup +} T cells, CD8{sup +} T cells, and CD45R/B220{sup +} B cells and a decrease in the percent of NK cells and granulocytes (Gr-1{sup +}). Males had an increase in the percent of splenic CD4{sup +} T cells and CD45R/B220{sup +} B cells and a decrease in the percent of CD8{sup +} T cells, NK cells, and granulocytes. The percentage of neutrophils and myeloid-derived suppressor cells were reduced in both sexes. The percent of splenic nTreg cells was decreased in all Cd-exposed offspring. Cd-exposed offspring were immunized with a streptococcal vaccine and the antibody response was determined. PC-specific serum antibody titers were decreased in Cd exposed female offspring but increased in the males. PspA-specific serum IgG titers were increased in both females and males compared to control animals. Females had a decrease in PspA-specific serum IgM antibody titers. Females and males had a decrease in the number of splenic anti-PspA antibody-secreting cells when standardized to the number of B cells. These findings demonstrate that very low levels of Cd exposure during gestation can result in long term sex-specific alterations on the immune system of the offspring. -- Highlights: ? Prenatal exposure to cadmium alters the immune system of 20 week old offspring. ? The percentage of DN1 and DN3 thymocytes was changed. ? Males and females had changed percentages of numerous splenic cell populations. ? The antibody response of a streptococcal vaccine showed numerous changes.

  4. Montana Tribes Realize Long-Held Vision of Acquiring Kerr Dam: Interview with Energy Keepers Inc. CEO Brian Lipscomb

    Office of Energy Efficiency and Renewable Energy (EERE)

    A short interview with Brian Lipscomb, president and CEO of Energy Keepers, Inc., a tribal corporation established in the fall of 2012 to manage the Confederated Salish and Kootenai Tribes’ (CSKT’s) planned acquisition of Kerr Dam.

  5. Acquired Tumor Cell Radiation Resistance at the Treatment Site Is Mediated Through Radiation-Orchestrated Intercellular Communication

    SciTech Connect (OSTI)

    Aravindan, Natarajan; Aravindan, Sheeja; Pandian, Vijayabaskar; Khan, Faizan H.; Ramraj, Satish Kumar; Natt, Praveen; Natarajan, Mohan

    2014-03-01

    Purpose: Radiation resistance induced in cancer cells that survive after radiation therapy (RT) could be associated with increased radiation protection, limiting the therapeutic benefit of radiation. Herein we investigated the sequential mechanistic molecular orchestration involved in radiation-induced radiation protection in tumor cells. Results: Radiation, both in the low-dose irradiation (LDIR) range (10, 50, or 100 cGy) or at a higher, challenge dose IR (CDIR), 4 Gy, induced dose-dependent and sustained NFκB-DNA binding activity. However, a robust and consistent increase was seen in CDIR-induced NFκB activity, decreased DNA fragmentation, apoptosis, and cytotoxicity and attenuation of CDIR-inhibited clonal expansion when the cells were primed with LDIR prior to challenge dose. Furthermore, NFκB manipulation studies with small interfering RNA (siRNA) silencing or p50/p65 overexpression unveiled the influence of LDIR-activated NFκB in regulating CDIR-induced DNA fragmentation and apoptosis. LDIR significantly increased the transactivation/translation of the radiation-responsive factors tumor necrosis factor-α (TNF-α), interleukin-1α (IL-1α), cMYC, and SOD2. Coculture experiments exhibit LDIR-influenced radiation protection and increases in cellular expression, secretion, and activation of radiation-responsive molecules in bystander cells. Individual gene-silencing approach with siRNAs coupled with coculture studies showed the influence of LDIR-modulated TNF-α, IL-1α, cMYC, and SOD2 in induced radiation protection in bystander cells. NFκB inhibition/overexpression studies coupled with coculture experiments demonstrated that TNF-α, IL-1α, cMYC, and SOD2 are selectively regulated by LDIR-induced NFκB. Conclusions: Together, these data strongly suggest that scattered LDIR-induced NFκB-dependent TNF-α, IL-1α, cMYC, and SOD2 mediate radiation protection to the subsequent challenge dose in tumor cells.

  6. Assessment of Cable Aging Equipment, Status of Acquired Materials, and Experimental Matrix at the Pacific Northwest National Laboratory

    SciTech Connect (OSTI)

    Fifield, Leonard S.; Westman, Matthew P.; Zwoster, Andy; Schwenzer, Birgit

    2015-03-30

    The need for increased understanding of the aging and degradation behavior for polymer components of nuclear power plant electrical cables is described in this report. The highest priority materials for study and the resources available at PNNL for these studies are also described. The anticipated outcomes of the PNNL work described are : improved understanding of appropriate accelerated aging conditions, improved knowledge of correlation between observable aging indicators and cable condition in support of advanced non-destructive evaluation methods, and practical knowledge of condition-based cable lifetime prediction.

  7. The integration of pollution prevention into business planning

    SciTech Connect (OSTI)

    Mongan, E.

    1996-12-31

    The cornerstone of DuPont`s environmental program is a commitment to employees, customers, shareholders and the public that the company will conduct its business with respect and care for the environment. The ultimate driver for environmental progress is the company`s goal of zero waste and emissions. The drive to zero is underscored by the belief that eliminating wastes and emissions will create positive results for the company`s businesses. DuPont has put in place a number of managing systems to support teams and individuals in their pursuit of environmental improvements. The goals and targets provide milestones to assess the company`s progress on the journey to the goal of zero. DuPont has policies and standards to address a wide range of environmental performance requirements for its operations. These policies and standards are held uniformly in DuPont`s worldwide operations, even if local, regional or national requirements are less strict than those of DuPont. The company performs environmental audits of all of its major facilities operations at least every two years to ensure compliance with corporate policies and standards as well as all regulations.

  8. DOE - Office of Legacy Management -- E I Du Pont - NJ 06

    Office of Legacy Management (LM)

    - NJ 06 FUSRAP Considered Sites E.I. Dupont, NJ Alternate Name(s): E.I. Du Pont De Nemours and Company E.I. Du Pont Company Dupont Chambers Works Plant NJ.06-1 NJ.06-5 Location: Pennsville and Carney Townships, Southeast bank of the Delaware River, Deepwater, New Jersey NJ.06-5 Historical Operations: Development of a process for converting uranium oxide to uranium tetraflouride, production of uranium tetraflouride, research into conversion of uranium oxide to uranium metal, and production of

  9. Ultra-Deepwater Advisory Committee Members | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ultra-Deepwater Advisory Committee » Ultra-Deepwater Advisory Committee Members Ultra-Deepwater Advisory Committee Members 2013-2014 Ultra-Deepwater Advisory Committee Members Dr. George A. Cooper* Professor University of California, Berkeley Dr. Quenton R. Dokken President/CEO Gulf of Mexico Foundation Dr. Hartley H. Downs Technology Fellow Baker Hughes Incorporated Dr. Douglas J. Foster Senior Scientist ConocoPhillips Mr. James D. Litton* President and CEO Litton Consulting Group, Inc. Mr. D.

  10. A Life-Cycle Assessment Comparing Select Gas-to-Liquid Fuels with Conventional Fuels in the Transportation Sector

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Life Cycle Assessment Comparing Select Gas-to-Liquid Fuels with Conventional Fuels in the Transportation Sector Robert E. Abbott, Ph.D. ConocoPhillips Paul Worhach, Ph.D. Nexant Corporation Diesel Engines Emission Reduction Conference Loews Coronado Bay Resort Coronado, CA August 29 - September 2, 2004 Study Purpose * Evaluate GTL energy use and emissions in comparison to alternative fuel production processes and end-uses * Education and communication with peers and stakeholders * Assess and

  11. Methane Hydrate Production Technologies to be Tested on Alaska's North

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Slope | Department of Energy Methane Hydrate Production Technologies to be Tested on Alaska's North Slope Methane Hydrate Production Technologies to be Tested on Alaska's North Slope October 24, 2011 - 1:00pm Addthis Washington, DC - The U.S. Department of Energy, the Japan Oil, Gas and Metals National Corporation, and ConocoPhillips will work together to test innovative technologies for producing methane gas from hydrate deposits on the Alaska North Slope. The collaborative testing will

  12. A Life-Cycle Assessment Comparing Select Gas-to-Liquid Fuels with

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conventional Fuels in the Transportation Sector | Department of Energy A Life-Cycle Assessment Comparing Select Gas-to-Liquid Fuels with Conventional Fuels in the Transportation Sector A Life-Cycle Assessment Comparing Select Gas-to-Liquid Fuels with Conventional Fuels in the Transportation Sector 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: ConocoPhillips and Nexant Corporatin 2004_deer_abbott.pdf (160.87 KB) More Documents & Publications Shell Gas to Liquids

  13. Exploration of Novel Materials for Development of Next Generation OPV Devices: Cooperative Research and Development Final Report, CRADA Number CRD-10-398

    SciTech Connect (OSTI)

    Olson, D.

    2012-09-01

    Organic-based solar cells offer the potential for low cost, scalable conversion of solar energy. This project will try to utilize the extensive organic synthetic capabilities of ConocoPhillips to produce novel acceptor and donor materials as well potentially as interface modifiers to produce improved OPV devices with greater efficiency and stability. The synthetic effort will be based on the knowledge base and modeling being done at NREL to identify new candidate materials.

  14. Management and Development of the Western Resources Project

    SciTech Connect (OSTI)

    Terry Brown

    2009-03-09

    The purpose of this project was to manage the Western Resources Project, which included a comprehensive, basin-wide set of experiments investigating the impacts of coal bed methane (CBM; a.k.a. coal bed natural gas, CBNG) production on surface and groundwater in the Powder River Basin in Wyoming. This project included a number of participants including Apache Corporation, Conoco Phillips, Marathon, the Ucross Foundation, Stanford University, the University of Wyoming, Montana Bureau of Mines and Geology, and Western Research Institute.

  15. UNITED STATES OF AMERICA FEDERAL ENERGY REGULATORY COMMISSION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Corporation Docket No. PF14-21-000 BP Alaska LNG, LLC Conoco Phillips Alaska LNG Company ExxonMobil Alaska LNG, LLC TransCanada Alaska Midstream, LP NOTICE OF INTENT TO PREPARE AN ENVIRONMENTAL IMPACT STATEMENT FOR THE PLANNED ALASKA LNG PROJECT AND REQUEST FOR COMMENTS ON ENVIRONMENTAL ISSUES (March 4, 2015) The staff of the Federal Energy Regulatory Commission (FERC or Commission) will prepare an environmental impact statement (EIS) that will discuss the environmental impacts of the Alaska LNG

  16. UNITED STATES OF AMERICA FEDERAL ENERGY REGULATORY COMMISSION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SUPPLEMENTAL NOTICE OF PUBLIC SCOPING MEETINGS FOR THE PLANNED ALASKA LNG PROJECT (October 20, 2015) The staff of the Federal Energy Regulatory Commission (FERC or Commission) will conduct additional public scoping meetings as part of their preparation of an environmental impact statement (EIS) for the Alaska LNG Project involving construction and operation of facilities by Alaska Gasline Development Corporation; BP Alaska LNG, LLC; Conoco Phillips Alaska LNG Company; ExxonMobil Alaska LNG, LLC;

  17. UNITED STATES OF AMERICA FEDERAL ENERGY REGULATORY COMMISSION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NOTICE OF PUBLIC SCOPING MEETINGS FOR THE PLANNED ALASKA LNG PROJECT (October 8, 2015) The staff of the Federal Energy Regulatory Commission (FERC or Commission) will conduct public scoping meetings as part of their preparation of an environmental impact statement (EIS) for the Alaska LNG Project involving construction and operation of facilities by Alaska Gasline Development Corporation; BP Alaska LNG, LLC; Conoco Phillips Alaska LNG Company; ExxonMobil Alaska LNG, LLC; and TransCanada Alaska

  18. Categorical Exclusion Determinations: Fossil Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fossil Energy Categorical Exclusion Determinations: Fossil Energy Categorical Exclusion Determinations issued by Fossil Energy. DOCUMENTS AVAILABLE FOR DOWNLOAD January 28, 2016 CX-200006: Categorical Exclusion Determination ConocoPhillips Alaska Natural Gas Corporation CX(s) Applied: B5.7 Date: 2/4/2016 Location(s): Other Offices(s): Fossil Energy, Natural Gas Regulation January 28, 2016 CX-200005: Categorical Exclusion Determination Bear Head LNG Corporation and Bear Head LNG (USA) CX(s)

  19. DOE - Office of Legacy Management -- Project Rio Blanco - CO 0-09

    Office of Legacy Management (LM)

    Rio Blanco - CO 0-09 FUSRAP Considered Sites Site: Project Rio Blanco (CO.0-09) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: ~ 52 miles north of Grand Junction, Co. , Rio Blanco County , Colorado CO.0-09-1 Evaluation Year: 1985 CO.0-09-1 Site Operations: The project was a cooperative research effort undertaken in 1973 between CER Geonuclear Corp, Continental Oil Co (Conoco), and the US Energy Research and Development Administration

  20. Bonded polyimide fuel cell package

    DOE Patents [OSTI]

    Morse, Jeffrey D.; Jankowski, Alan; Graff, Robert T.; Bettencourt, Kerry

    2010-06-08

    Described herein are processes for fabricating microfluidic fuel cell systems with embedded components in which micron-scale features are formed by bonding layers of DuPont Kapton.TM. polyimide laminate. A microfluidic fuel cell system fabricated using this process is also described.

  1. Bonded polyimide fuel cell package and method thereof

    DOE Patents [OSTI]

    Morse, Jeffrey D.; Jankowski, Alan; Graff, Robert T.; Bettencourt, Kerry

    2005-11-01

    Described herein are processes for fabricating microfluidic fuel cell systems with embedded components in which micron-scale features are formed by bonding layers of DuPont Kapton.TM. polyimide laminate. A microfluidic fuel cell system fabricated using this process is also described.

  2. Reducing Enzyme Costs Increases the Market Potential of Biofuels (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-08-01

    Cellulosic ethanol prices depend heavily on the cost of the cellulase enzymes used to break down the biomass into fermentable sugars. To reduce these costs, NREL partnered with two leading enzyme companies, Novozymes and Genencor, to engineer new cellulase enzymes that are exceptionally good at breaking down cellulose. Genencor is now part of DuPont Industrial Biosciences.

  3. Natural Phenomena Hazards Design Criteria and Other Characterization Information for the MFFF at SRS

    SciTech Connect (OSTI)

    Wyatt, D.E.

    2000-12-01

    This report is a comprehensive complication applicable to the general Savannah River Site area, developed by both the original contractor, the DuPont Company, and by the current plant operator, Westinghouse Savannah River Company, over the full plant lifetime period (1950 - 2000).

  4. CO.

    Office of Legacy Management (LM)

    hcloscd in a-;.F' . - .T- m The radiologic?. survey report for thz Z.J, Lui;ont i;o:,:c:;,ours and Co. facility, a:ld - The L.1. Dupont DCieLOurS and Co. fscility Site Su:::ary. ...

  5. Method of preparation of bonded polyimide fuel cell package

    DOE Patents [OSTI]

    Morse, Jeffrey D.; Jankowski, Alan; Graff, Robert T.; Bettencourt, Kerry

    2011-04-26

    Described herein are processes for fabricating microfluidic fuel cell systems with embedded components in which micron-scale features are formed by bonding layers of DuPont Kapton.TM. polyimide laminate. A microfluidic fuel cell system fabricated using this process is also described.

  6. Acquisition Letter/Financial Assistance Letter (ALIFAL) 201 0-06, Acquiring Information Technology, Requirement to Comply With Internet Protocol Version 6 (IPv6)

    Office of Energy Efficiency and Renewable Energy (EERE)

    AL/FAL 201 0-06 provides notice that the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council are issuing a final rule amending the Federal Acquisition Regulation (FAR) to require that Internet Protocol Version 6 (IPv6) compliant products be included in all new information technology (IT) acquisitions using Internet Protocol (IP). ALIFAL 2010-06, accordingly, updates the IPv6 guidance provided in AL-2006-04.

  7. SU-E-J-204: Can a Commercial System for MR-IGRT Be Used to Treat Patients Without Acquiring a CT Scan?

    SciTech Connect (OSTI)

    Wooten, H; Yaddanapudi, S; Santanam, L; Li, H; Mutic, S

    2015-06-15

    Patients treated using a magnetic-resonance image guided radiation therapy (MR-IGRT) system received both CT and MR simulations. During planning, the CT is used to determine relative electron density (RED) using a calibration table. This study aims to investigate the feasibility of MR-only treatments by comparing CT-computed dose distributions to those computed with combinations of water (1.0), lung (0.26), tissue (1.02), and bone (1.12) bulk RED overrides, and to identify the effects of the magnetic field on the RED-overridden doses. Methods: Four patients who received treatment using a commercial MR-IGRT system were analyzed (1 lung, 2 abdomen, and 1 pelvis). The clinical plans were computed using the first fraction MRI as primary, and the simulation CT as secondary for REDs. Plans were reoptimized using default bulk RED overrides (water/lung and tissue/lung for the lung patient, water/bone, tissue/bone, water only, and tissue only for the abdomen and pelvis patients). Additionally, each plan was re-optimized to include the static magnetic field. All plans were normalized to the same PTV coverage as the clinical plan. Dose-difference volumes and DVHs were computed for bulk density override plans, and 3D gamma analyses between each plan and its accompanying magnetic field plan were performed using 3%/3 mm dose difference and distance-to-agreement criteria using the PTV and Skin as masking structures. Results: The average differences in PTV and organs-at-risk mean dose for all RED combinations tested were −0.19 Gy (−0.62 – 0.06 Gy) and −0.34 Gy (−1.76 – 0.33 Gy), respectively. The average PTV and Skin gamma pass rates for all RED combinations tested were 99.88% (99.5% – 100%) and 98. 35% (96.3% – 99.6%). No systematic differences in DVHs or isodoses were observed. Conclusions: It is likely that that a commercial MR-IGRT system may produce high quality treatment plans without the need for CT scans. Authors of this abstract are members of the Washington University Radiation Oncology department, which has a research agreement with ViewRay, Inc.

  8. ADVANCED SECOND GENERATION CERAMIC CANDLE FILTERS

    SciTech Connect (OSTI)

    M.A. Alvin

    2002-01-31

    Through sponsorship from the Department of Energy's National Energy Technology Laboratory (DOE/NETL), development and manufacture of advanced second generation candle filters was undertaken in the early 1990's. Efforts were primarily focused on the manufacture of fracture toughened, 1.5 m, continuous fiber ceramic composite (CFCC) and filament wound candle filters by 3M, McDermott, DuPont Lanxide Composites, and Techniweave. In order to demonstrate long-term thermal, chemical, and mechanical stability of the advanced second generation candle filter materials, Siemens Westinghouse initiated high temperature, bench-scale, corrosion testing of 3M's CVI-SiC and DuPont's PRD-66 mini-candles, and DuPont's CFCC SiC-SiC and IF&P Fibrosic{sup TM} coupons under simulated, pressurized fluidized-bed combustion (PFBC) conditions. This effort was followed by an evaluation of the mechanical and filtration performance of the advanced second generation filter elements in Siemens Westinghouse's bench-scale PFBC test facility in Pittsburgh, Pennsylvania. Arrays of 1.4-1.5 m 3M CVI-SiC, DuPont PRD-66, DuPont SiC-SiC, and IF&P Fibrosic{sup TM} candles were subjected to steady state process operating conditions, increased severity thermal transients, and accelerated pulse cycling test campaigns which represented {approx}1760 hours of equivalent filter operating life. Siemens Westinghouse subsequently participated in early material surveillance programs which marked entry of the 3M CVI-SiC and DuPont PRD-66 candle filters in Siemens Westinghouse Advanced Particulate Filtration (APF) system at the American Electric Power (AEP) Tidd Demonstration Plant in Brilliant, Ohio. Siemens Westinghouse then conducted an extended, accelerated life, qualification program, evaluating the performance of the 3M, McDermott, and Techniweave oxide-based CFCC filter elements, modified DuPont PRD-66 elements, and the Blasch, Scapa Cerafil{sup TM}, and Specific Surface monolithic candles for use in the APF

  9. Potential Roles of Ammonia in a Hydrogen Economy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Potential Roles of Ammonia in a Hydrogen Economy A Study of Issues Related to the Use Ammonia for On-Board Vehicular Hydrogen Storage U.S. Department of Energy Primary Authors: George Thomas 1 and George Parks 2 1 U.S. Department of Energy (retired, Sandia National Laboratory, on assignment to DOE Hydrogen Program) and member of FreedomCAR & Fuel Partnership Hydrogen Storage Technical Team 2 ConocoPhillips; member of FreedomCAR & Fuel Partnership Hydrogen Storage Technical Team and

  10. Presentations from June 6-7 2013 Methane Hydrates Advisory Meeting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy June 6-7 2013 Methane Hydrates Advisory Meeting Presentations from June 6-7 2013 Methane Hydrates Advisory Meeting ConocoPhillips test results and data analysis (8.24 MB) Methane Hydrate Workshop as part of the FY 2013 Methane Hydrate Field Program (904.56 KB) Methane Hydrates Advisory Committee Meeting: Program Funding (292.15 KB) Update on BOEM Lower 48 Assessment: A presentation to the Methane Hydrate Advisory Committee (9.13 MB) Gas Hydrate Program Activities in

  11. Ultra-Deepwater Production Systems

    SciTech Connect (OSTI)

    K. L. Smith; M. E. Leveque

    2004-09-30

    This report includes technical progress made during the period October, 2003 through September, 2004. At the end of the last technical progress report, the subsea processing aspects of the work program had been dropped due to the lack of commercial opportunity within ConocoPhillips, and the program had been redirected towards two other promising deepwater technologies: the development and demonstration of a composite production riser, and the development and testing of a close-tolerance liner drilling system. This report focuses on these two technologies.

  12. DOE Hydrogen Delivery Analysis and High Pressure Tanks R&D Project Review Meeting Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AGENDA DOE Hydrogen Delivery Analysis and High Pressure Tanks R&D Project Review Meeting February 8-9, 2005 Argonne National Laboratory February 8, 2005 7:30 Arrival and breakfast 8:30 Overview Presentations DOE Hydrogen Program Mark Paster, DOE/OHFCIT Overview of FreedomCAR & Fuels Partnership/DOE Delivery Program George Parks, ConocoPhillips 10:00 BREAK 10:15 High-Pressure Tube Trailers and Tanks Salvadore Aceves, Lawrence Livermore National Laboratory 11:15 High-Pressure Hydrogen

  13. Venezuelan projects advance to develop world`s largest heavy oil reserves

    SciTech Connect (OSTI)

    Croft, G.; Stauffer, K.

    1996-07-08

    A number of joint venture projects at varying stages of progress promise to greatly increase Venezuela`s production of extra heavy oil. Units of Conoco, Chevron, Total, Arco, and Mobil have either signed agreements or are pursuing negotiations with affiliates of state-owned Petroleos de Venezuela SA on the development of huge reserves of 8--10{degree} gravity crude. Large heavy oil resources are present in the oil producing areas of eastern and western Venezuela, and the largest are in eastern Venezuela`s Orinoco heavy oil belt. The paper discusses the Orinoco heavy oil belt geology and several joint ventures being implemented.

  14. Miniature lowpass filters in low loss 9k7 LTCC

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dai, Steve; Hsieh, Lung -Hwa

    2015-04-01

    DuPont 9k7 low temperature cofired ceramic (LTCC) is a low loss, or high quality factor Q, tape system targeting at radio frequency (RF) applications. This paper reports the effect of a critical process parameter, heating rate, on the densification and dielectric properties of the 9k7 LTCC. The role of competing densification and crystallization during the sintering of 9k7 is discussed. The high Q of DuPont 9K7 can be used to improve RF system performance, for example a better receiver noise figure, by designing embedded passive RF components such as inductors, capacitors and filters. As a result, miniaturized multilayer low passmore » filters (LPF) with a wide stopband were fabricated to showcase the technology.« less

  15. Electrical properties of commercial sheet insulation materials for cryogenic applications

    SciTech Connect (OSTI)

    Tuncer, Enis; Sauers, Isidor; James, David Randy; Ellis, Alvin R; Pace, Marshall O

    2008-01-01

    Dielectric properties of electrical insulation materials are needed for low-temperature power applications. Performance of materials and their compatibility determine the size of the electrical insulation in power equipment. In this work we report the dielectric properties of some commercially available materials in sheet form. The selected materials are polypropylene laminated paper from Sumitomo Electric U.S.A., Inc., porous polyethylene (Tyvek\\texttrademark) from Dupont, and polyamide paper (Nomex\\texttrademark) from Dupont. The dielectric properties are characterized with an electrical impedance analyzer in the frequency domain. The impedances are recorded in a cryocooler in the temperature range from 50 to 300 K. The dielectric breakdown characteristics of the materials are measured in a liquid nitrogen bath at atmospheric pressure.

  16. Miniature lowpass filters in low loss 9k7 LTCC

    SciTech Connect (OSTI)

    Dai, Steve; Hsieh, Lung -Hwa

    2015-04-01

    DuPont 9k7 low temperature cofired ceramic (LTCC) is a low loss, or high quality factor Q, tape system targeting at radio frequency (RF) applications. This paper reports the effect of a critical process parameter, heating rate, on the densification and dielectric properties of the 9k7 LTCC. The role of competing densification and crystallization during the sintering of 9k7 is discussed. The high Q of DuPont 9K7 can be used to improve RF system performance, for example a better receiver noise figure, by designing embedded passive RF components such as inductors, capacitors and filters. As a result, miniaturized multilayer low pass filters (LPF) with a wide stopband were fabricated to showcase the technology.

  17. Utility-led cogen plant meets tight specs on steam supply

    SciTech Connect (OSTI)

    Eckersley, R.

    1995-08-01

    No Purpa machine here, this plant adds low-cost generating capacity while supplying steam with guaranteed reliability to petrochemicals producer. This article examines the design which ensures recovery of export steam load with minimum time and pressure loss. EI DuPont de Nemours and Co needed a new source of reliable, inexpensive steam to replace aging, inefficient boilers at its LaPorte (Tex) plant, where agricultural chemicals and other products are manufactured. At the same time, Houston Lighting and Power Co (HL and P) was exploring new ways to add capacity cost effectively. San Jacinto steam/electric station was the ideal solution that satisfied both needs. Fully operation since last April, the station`s performance has been excellent. Operating with complete reliability, the system has respond smoothly to meet changes in DuPont`s steam demand without upset.

  18. NREL Science Central to Success of New Biofuels Projects: - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Biomass and Biofuels Biomass and Biofuels Return to Search NREL Science Central to Success of New Biofuels Projects: DuPont-NREL Partnership Delivered Key Innovations for Large Scale Cellulosic Ethanol Facility in Iowa National Renewable Energy Laboratory Success Story Details Partner Location Agreement Type Publication Date DuPont Delaware Other February 23, 2015 Summary The Energy Department's National Renewable Energy Laboratory (NREL) played crucial roles in developing

  19. A Comparison of Key PV Backsheet and Module Properties from Fielded Module

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exposures and Accelerated Test Conditions | Department of Energy A Comparison of Key PV Backsheet and Module Properties from Fielded Module Exposures and Accelerated Test Conditions A Comparison of Key PV Backsheet and Module Properties from Fielded Module Exposures and Accelerated Test Conditions Presented at the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado pvmrw13_ps5_dupont_gambogi.pdf (781.38 KB) More Documents & Publications Agenda for the PV Module

  20. Analysis of the Durability of PEM FC Membrane Electrode Assemblies in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Automotive Applications | Department of Energy the Durability of PEM FC Membrane Electrode Assemblies in Automotive Applications Analysis of the Durability of PEM FC Membrane Electrode Assemblies in Automotive Applications These slides were presented at the 2010 New Fuel Cell Projects Meeting on September 28, 2010. 10_dupont_perry.pdf (204.87 KB) More Documents & Publications DOE Fuel Cell Pre-Solicitation Workshop - Breakout Group 2: MEAs, Components, and Integration Membranes and MEAs

  1. STEAB October Meeting Minutes

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEAB October 2015 Meeting October 6-7, 2015 Renaissance Washington, DC Dupont Circle Hotel Washington, DC OCTOBER MEETING ATTENDEES Designated Federal Officer (DFO):  Michael Li, DFO, EERE, DOE. STEAB MEETING ATTENDANCE BOARD MEMBERS Present Absent Jeff Ackermann, Director, Colorado Energy Office X Roger Berliner, Council President, Montgomery County Council X Susan Brown, Deputy Administrator, Wisconsin Division of Energy X Tom Carey, Director, Energy and Rehabilitation Programs, New York

  2. Lynden Archer > James A. Friend Family Distinguished Professor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemical and Biomolecular Engineering > Faculty Directory > The Energy Materials Center at Cornell Lynden Archer James A. Friend Family Distinguished Professor Chemical and Biomolecular Engineering Research Group Webpage laa25@cornell.edu Professor Archer received the Career Award from the National Science Foundation, 1996, Dupont Young Professor Award 1996-1999, 3M Company Non-Tenured Faculty Award 1995, and the George Armistead Faculty Fellowship 1999-2000. Lynden joined the Cornell

  3. Analysis of the Durability of PEM FC Membrane Electrode Assemblies in Automotive Applications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    g y Analysis of the Durability of PEM FC Membrane Electrode Assemblies in Automotive Applications Through the Fundamental Understanding of Membrane and MEA Degradation Pathways DE-EE0003772 2010 DOE Hydrogen Program Fuel Cell Project Kick-Off Randal L. Perry E.I. duPont de Nemours September 28 2010 September 28, 2010 This presentation does not contain any proprietary, confidential, or otherwise restricted information" 2 Overview Timeline (tentative) Start date: Oct 1 2010 Start date: Oct 1,

  4. Attic Retrofits Using Nail-Base Insulated Panels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attic Retrofits Using Nail-Base Insulated Panels Attic Retrofits Using Nail-Base Insulated Panels Photo courtesy of the Structural Insulated Panel Association. Photo courtesy of the Structural Insulated Panel Association. Lead Performer: Home Innovation Research Labs-Upper Marlboro, MD Partners: Structural Insulated Panel Association, American Chemistry Council, Forest Products Laboratory, DuPont, APA-The Engineered Wood Association, Insurance Institute for Business and Home Safety, Remodeling

  5. DOE/OR/20722-22 UC-70A DBaffu Formerly Utilized Sites Remedial Action Program (FUSRAP)

    Office of Legacy Management (LM)

    22 UC-70A DBaffu Formerly Utilized Sites Remedial Action Program (FUSRAP) Contract No. DE-ACO5-81OR20722 c P c P RADIOLOGICAL SURVEY REPORT FOR THE DUPONT CHAMBER WORKS PLANT Deepwater, New Jersey Bechtel National, Inc. Advanced Technology Division June 1984 Technical Information Center Office of Scientific and Technical Information U.S. Department of Energy -- .,,.... - ~S",.W -. - - -. _ -- --- --.- ----.-- ___ ..---. -.~ LEGAL NOTICE ' I91i.m report war prepared u M account of work

  6. Microstructure and Phase Development of Buried Resistors in Low Temperature Co-Fired Ceramic

    SciTech Connect (OSTI)

    DIMOS,DUANE B.; KOTULA,PAUL G.; RODRIGUEZ,MARK A.; YANG,PIN

    1999-11-30

    Embedded resistor circuits have been generated with the use of a Micropen system Ag conductor paste (DuPont 6142D), a new experimental resistor ink from DuPont (E84005-140), and Low Temperature Co-fired Ceramic (LTCC) green tape (DuPont A951). Sample circuits were processed under varying peak temperature ranges (835 C-875 C) and peak soak times (10 min-720 min). Resistors were characterized by SEM, TEM, EDS, and high-temperature XRD. Results indicate that devitrification of resistor glass phase to Celcian, Hexacelcian, and a Zinc-silicate phase occurred in the firing ranges used (835-875 C) but kinetics of divitrification vary substantially over this temperature range. The resistor material appears structurally and chemically compatible with the LTCC. RuO{sub 2} grains do not significantly react with the devitrifying matrix material during processing. RuO{sub 2} grains coarsen significantly with extended time and temperature and the electrical properties appear to be strongly affected by the change in RuO{sub 2} grain size.

  7. Offshore UK; Shell starts Galleon field pre-drilling

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    Shell U.K. Exploration and Production (Shell), acting as operator for a consortium of companies, has described plans for the two-phase development of Galleon gas field, located 50 miles from the Shell/Esso gas processing plant at Bacton, Norfolk, in 82 ft of water. The field has estimated reserves of 1.4 Tcf. Phase 1 development will cost [Brit pounds]300 million ($500 million); and first production is expected in late 1994. British Gas has agreed to purchase at least Phase 1 gas. Shell will be the operator for the development. A preliminary costsharing arrangement has been agreed to by the co-venturers to bridge the period until equities are determined. The consortium comprises Shell and Esso, with 40% each, and Conoco (U.K.) Ltd. and Oryx U.K. Energy Co., each with 10%. The field is located in Shell/Esso Blocks 48/14, 19a and 20a, and Conoco/Oryx Block 48/15a. Galleon will be the sixth gas field to be developed in the Southern North Sea by Shell, the operator for Shell and Esso. It will be the third field in the Sole Pit area, where total reserves found by Shell/Esso are about 3.0 Tcf.

  8. Transparent communications permit unmanned operations

    SciTech Connect (OSTI)

    1995-07-01

    Not-normally-manned platforms are not a new development. However, their use in harsher environments has until recently, been limited. Development of reliable communications networks capable of handling the large amounts of data required for process control in real time with distributed control systems (DCSs) has been a key factor in making the concept viable for harsher, more remote environments. The article below examines the transparent communications network and DCS installed on Pickerill field, offshore UK, by Fisher-Rosemount Systems and its operational parameters. Pickerill field, some 50 mi off the Lincolnshire coast, comprises two small unmanned platforms producing gas under remote control from Arco`s operations base at Great Yarmouth about 60 mi south. Reliable communication is required both with the two platforms offshore and with Conoco`s gas processing operators at Theddlethorpe. Fundamental to project success was the ability of the process control system to provide entirely secure and transparent communication with equipment offshore and thus enable operators at Great Yarmouth to interact with the process as if it were local to their control center.

  9. Remote Sensing and In-Situ Observations of Arctic Mixed-Phase and Cirrus Clouds Acquired During Mixed-Phase Arctic Cloud Experiment: Atmospheric Radiation Measurement Uninhabited Aerospace Vehicle Participation

    SciTech Connect (OSTI)

    McFarquhar, G.M.; Freer, M.; Um, J.; McCoy, R.; Bolton, W.

    2005-03-18

    The Atmospheric Radiation Monitor (ARM) uninhabited aerospace vehicle (UAV) program aims to develop measurement techniques and instruments suitable for a new class of high altitude, long endurance UAVs while supporting the climate community with valuable data sets. Using the Scaled Composites Proteus aircraft, ARM UAV participated in Mixed-Phase Arctic Cloud Experiment (M-PACE), obtaining unique data to help understand the interaction of clouds with solar and infrared radiation. Many measurements obtained using the Proteus were coincident with in-situ observations made by the UND Citation. Data from M-PACE are needed to understand interactions between clouds, the atmosphere and ocean in the Arctic, critical interactions given large-scale models suggest enhanced warming compared to lower latitudes is occurring.

  10. Effects of Introduced Materials in the Drift Scale Test

    SciTech Connect (OSTI)

    DeLoach, L; Jones, RL

    2002-01-11

    Water samples previously acquired from superheated (>140 C) zones within hydrological test boreholes of the Drift Scale Test (DST) show relatively high fluoride concentrations (5-66 ppm) and low pH (3.1-3.5) values. In these high temperature regions of the rock, water is present superheated vapor only--liquid water for sampling purposes is obtained during the sampling process by cooling. Based on data collected to date, it is evident that the source of the fluoride and low pH is from introduced man-made materials (Teflon{trademark} and/or Viton{trademark} fluoroelastomer) used in the test. The test materials may contribute fluoride either by degassing hydrogen fluoride (HF) directly to produce trace concentrations of HF gas ({approx}0.1 ppm) in the high temperature steam, or by leaching fluoride in the sampling tubes after condensation of the superheated steam. HF gas is known to be released from Viton{trademark} at high temperatures (Dupont Dow Elastomers L.L.C., Elkton, MD, personal communication) and the sample water compositions indicate near stoichiometric balance of hydrogen ion and fluoride ion, indicating dissolution of HF gas into the aqueous phase. These conclusions are based on a series of water samples collected to determine if the source of the fluoride is from the degradation of materials originally installed to facilitate measurements. Analyses of these water samples show that the source of the fluoride is the introduced materials, that is the Viton{trademark} packers used to isolate test zones and/or Teflon{trademark} tubing used to draw water and steam from the test zones. In particular, water samples collected from borehole (BH) 72 high temperatures ({approx} 170 C) prior to introduction of any Viton{trademark} or Teflon{trademark} show pH Values (4.8 to 5.5) and fluoride concentrations well below 1 ppm over a period of six months. These characteristics are typical of condensing DST steam that contains only some dissolved carbon dioxide generated

  11. Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT)

    SciTech Connect (OSTI)

    Conocophillips

    2007-09-30

    The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project was established to evaluate integrated electrical power generation and methanol production through clean coal technologies. The project was under the leadership of ConocoPhillips Company (COP), after it acquired Gasification Engineering Corporation (GEC) and the E-Gas gasification technology from Global Energy Inc. in July 2003. The project has completed both Phase 1 and Phase 2 of development. The two project phases include the following: (1) Feasibility study and conceptual design for an integrated demonstration facility at SG Solutions LLC (SGS), previously the Wabash River Energy Limited, Gasification Facility located in West Terre Haute, Indiana, and for a fence-line commercial embodiment plant (CEP) operated at the Dow Chemical Company or Dow Corning Corporation chemical plant locations. (2) Research, development, and testing (RD&T) to define any technology gaps or critical design and integration issues. Phase 1 of this project was supported by a multi-industry team consisting of Air Products and Chemicals, Inc., The Dow Chemical Company, Dow Corning Corporation, Methanex Corporation, and Siemens Westinghouse Power Corporation, while Phase 2 was supported by Gas Technology Institute, TDA Research Inc., and Nucon International, Inc. The SGS integrated gasification combined cycle (IGCC) facility was designed, constructed, and operated under a project selected and co-funded under the Round IV of the United States Department of Energy's (DOE's) Clean Coal Technology Program. In this project, coal and/or other carbonaceous fuel feedstocks are gasified in an oxygen-blown, entrained-flow gasifier with continuous slag removal and a dry particulate removal system. The resulting product synthesis gas (syngas) is used to fuel a combustion turbine generator whose exhaust is integrated with a heat recovery steam generator to drive a refurbished steam turbine generator

  12. WABASH RIVER INTEGRATED METHANOL AND POWER PRODUCTION FROM CLEAN COAL TECHNOLGIES (IMPPCCT)

    SciTech Connect (OSTI)

    Albert C. Tsang

    2004-03-26

    The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is evaluating integrated electrical power generation and methanol production through clean coal technologies. The project is under the leadership of ConocoPhillips Company (COP), after it acquired Gasification Engineering Corporation (GEC) and the E-Gas gasification technology from Global Energy in July 2003. The project has completed Phase I, and is currently in Phase II of development. The two project phases include: (1) Feasibility study and conceptual design for an integrated demonstration facility at Global Energy's existing Wabash River Energy Limited (WREL) plant in West Terre Haute, Indiana, and for a fence-line commercial embodiment plants (CEP) operated at Dow Chemical or Dow Corning chemical plant locations; and (2) Research, development, and testing (RD&T) to define any technology gaps or critical design and integration issues. The Phase I of this project was supported by a multi-industry team consisting of Air Products and Chemicals, Inc., Dow Chemical Company, Dow Corning Corporation, Methanex Corporation, and Siemens Westinghouse Power Corporation, while Phase II is supported by Gas Technology Institute, TDA Research Inc., and Nucon International, Inc. The WREL integrated gasification combined cycle (IGCC) facility was designed, constructed, and operated under a project selected and co-funded under the Round IV of the United States Department of Energy's (DOE's) Clean Coal Technology Program. In this project, coal and/or other solid fuel feedstocks are gasified in an oxygen-blown, entrained-flow gasifier with continuous slag removal and a dry particulate removal system. The resulting product synthesis gas is used to fuel a combustion turbine generator whose exhaust is integrated with a heat recovery steam generator to drive a refurbished steam turbine generator. The gasifier uses technology initially developed by The Dow Chemical Company (the

  13. MACHINE AND FOUNDRY COMPANY

    Office of Legacy Management (LM)

    MACHINE AND FOUNDRY COMPANY kt '- : :'~ ENGINEERING DIVISIOJ ---. Cl FIELD iRIP ,REP@?T ,' ~ i;~:z;~zy~ MEETING REPORT : .I.-.-' ~Y ::,:I :. &, .I7 ENGINEERING REPORT- : $T, ~ suBJ:m~i-c n-..*~~.~n~ 9r.1 _ P,Y.~.I~ ADDRESS: :'~.'"I .- .._ c. Plans for - ,:, ..-; .:.j s ,PERSON CONTACTED . . .' ., I : /LV cliq 22: PLPCZS w: - American Machine & Fouudq Co., i3ue Termlual. Office ;s& $' PRI?sI?,NT: S. P~:Chartland - DuPont D. B. Craxford - AW ..x.i "7.7, J. J* Crata - LHF 1, .

  14. STEAB August 2014 Meeting Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEAB AUGUST MEETING AGENDA August 20 - 21, 2014 Washington Marriott Georgetown, 1221 22 nd Street, NW, Washington, DC Dupont Salon F/G DAY 1 - August 20 th 8:00 - 9:00 Breakfast, hotel meeting room 9:00 - 9:30 Welcome and Meeting Overview Julie and Frank 9:30 - 10:45 Discussion with EERE's Deputy Assistant Secretary for Energy Efficiency Dr. Kathleen Hogan 10:45 - 11:00 Break 11:00 - 12:00 Discussion and Follow-up to STEAB's Recommendations on a National Lab Voucher Program Joyce Yang and

  15. Superconductivity Technology Program for electric power systems: Proceedings

    SciTech Connect (OSTI)

    Marriott, K.B.

    1993-09-01

    Twenty-seven presentations are included in viewgraph form for the wire development panel, applications development panel, and thallium workshop. Authors and affiliations are: (wire development panel) Kreoger/Christen (ORNL), Malozemoff (American Superconductor Corp.), Blaugher (National Renewable Energy Lab.), Haldar (Intermagnetics), Gray/Lanagan/Eror (ANL), Bickel/Voigt/Roth (Sandia), Tkaczyk (GE), Suenaga (BNL), Willis/Korzekwa/Maley (Los Alamos); (applications development panel) Peterson/Stewart (Los Alamos), Iwasa (BNL), Hull/Nieman (ANL), Murphy/DeGregoria (ORNL), Hazelton (Intermagnetics), Dykhuizen (Sandia); (thallium workshop) Goodrich (NIST), Blaugher (NREL), Roth (Sandia), Holstein (DuPont), Paranthaman (ORNL), and Willis (Los Alamos).

  16. Microsoft PowerPoint - 2 McFarlane_VAP Update.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RPWG Breakout Session RPWG Breakout Session RPWG Breakout Session 1:00-1:20 Sally McFarlane - VAP update + aircraft albedo experiment 1:20-1:35 RPWG Priority Discussion Research talks: 1:35 Jennifer Delamere - SW QME update 1:45 Lazaros Oreopoulos - CIRC 1:55 Ibrahim Reda - Recent Results of Pyrgeometer Calibrations Traceable to the World Infrared Standard Group. 2:05 Tom Stoffel - Results of AMF/GNDRAD Reconfiguration on Upwelling Irradiances. 2:10 Jean-Charles Dupont - Observed cirrus cloud

  17. EVALUATION OF GLOVEBOX GLOVES FOR EFFECTIVE PERMEATION CONTROL

    SciTech Connect (OSTI)

    Korinko, P.

    2012-02-29

    A research and development task was undertaken to determine the permeabilities of hydrogen and dry air through different polymeric glove materials that are used to maintain the integrity of glovebox secondary containment. Fifteen different glove samples were obtained from four different manufacturers and samples cut from these gloves were tested. The gloves included baseline butyl rubber, Viton{reg_sign}, Dupont{reg_sign} Hypalon{reg_sign}, polyurethane, as well as composite gloves. The testing indicated that all of the vendor's butyl rubber gloves and the Jung Viton{reg_sign} gloves performed comparably in both gases.

  18. DOE - Office of Legacy Management -- Colorado Fuel and Iron - NY 0-08

    Office of Legacy Management (LM)

    Fuel and Iron - NY 0-08 FUSRAP Considered Sites Site: Colorado Fuel and Iron (NY.0-08 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Watervliet , New York NY.0-08-1 Evaluation Year: 1987 NY.0-08-1 Site Operations: Site was a contractor to DuPont. Exact nature of operations is not clear. No records to indicate that radioactive materials were handled at the site. NY.0-08-1 Site Disposition: Eliminated NY.0-08-1 Radioactive Materials

  19. I I

    Office of Legacy Management (LM)

    I Header Sheet Doc ID # -leo 7 I/ o - Xi "BECHTEL RADIOLOGICAL SURVEY REPORTII 1 9 8 5 MANHATTAN PROJECT I DOE/QR/20722-22 RADIOLOGICAL SURVEY OF THE E. 1. DUPONT DE NEMOURS AND COMPANY CHAMBERS WORKS PLANT DEEPWATER, NEW JERSEY MARCH 1985 Prepared for UNITED STATES DEPAATMENT OF ENERGY OAK RIDGE OPERATIONS OFeICE Under Contract No. DE-AC05-81OR20722 By BeChtel Hationalt Inc. Advanced Technology DiVision Oak Ridgep Tennessee Bechtel Job NO. 14501 ABSTRACT During October and November 1983, a

  20. Circleville, Ohio Solar Plant Shows Value of Clean Energy Tax Credits |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Circleville, Ohio Solar Plant Shows Value of Clean Energy Tax Credits Circleville, Ohio Solar Plant Shows Value of Clean Energy Tax Credits May 22, 2012 - 5:03pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON -- As part of the Obama Administration's all-out, all-of-the-above approach to American energy, U.S. Energy Secretary Steven Chu today recognized the grand opening of DuPont's expanded manufacturing plant in Circleville, Ohio and called on Congress to extend

  1. C1 CHEMISTRY FOR THE PRODUCTION OF ULTRA-CLEAN LIQUID TRANSPORTATION FUELS AND HYDROGEN

    SciTech Connect (OSTI)

    Gerald P. Huffman

    2003-03-31

    Faculty and students from five universities--the University of Kentucky, University of Pittsburgh, University of Utah, West Virginia University, and Auburn University--are collaborating in a research program to develop C1 chemistry processes to produce ultra-clean liquid transportation fuels and hydrogen, the zero-emissions transportation fuel of the future. The feedstocks contain one carbon atom per molecular unit. They include synthesis gas (syngas), a mixture of carbon monoxide and hydrogen produced by coal gasification or reforming of natural gas, methane, methanol, carbon dioxide, and carbon monoxide. An important objective is to develop C1 technology for the production of transportation fuel from domestically plentiful resources such as coal, coalbed methane, and natural gas. An Industrial Advisory Board with representatives from Chevron-Texaco, Eastman Chemical, Conoco-Phillips, Energy International, the Department of Defense, and Tier Associates provides guidance on the practicality of the research.

  2. LBL/Industry fractured reservoir performance definition project

    SciTech Connect (OSTI)

    Benson, S.M.

    1995-04-01

    One of the problems facing the petroleum industry is the recovery of oil from heterogeneous, fractured reservoirs and from reservoirs that have been partially depleted. In response to this need, several companies, notably British Petroleum USA, (BP) and Continental Oil Company (CONOCO), have established integrated reservoir description programs. Concurrently, LBL is actively involved in developing characterization technology for heterogeneous, fractured rock, mainly for DOE`s Civilian Nuclear Waste Program as well as Geothermal Energy programs. The technology developed for these programs was noticed by the petroleum industry and resulted in cooperative research centered on the petroleum companies test facilities. The emphasis of this work is a tightly integrated interdisciplinary approach to the problem of characterizing complex, heterogeneous earth materials. In this approach we explicitly combine the geologic, geomechanical, geophysical and hydrologic information in a unified model for predicting fluid flow. The overall objective is to derive improved integrated approaches to characterizing naturally fractured gas reservoirs.

  3. Comparison of lower-frequency (<1000 Hz) downhole seismic sources for use at environmental sites

    SciTech Connect (OSTI)

    Elbring, G.J.

    1995-03-01

    In conjunction with crosswell seismic surveying being done at the Hanford Site in south-central Washington, four different downhole seismic sources have been tested between the same set of boreholes. The four sources evaluated were the Bolt airgun, the OYO-Conoco orbital vibrator, and two Sandia-developed vertical vibrators, one pneumatically-driven, and the other based on a magnetostrictive actuator. The sources generate seismic energy in the lower frequency range of less than 1000 Hz and have different frequency characteristics, radiation patterns, energy levels, and operational considerations. Collection of identical data sets with all four sources allows the direct comparison of these characteristics and an evaluation of the suitability of each source for a given site and target.

  4. CO{sub 2} HYDRATE PROCESS FOR GAS SEPARATION

    SciTech Connect (OSTI)

    G. Deppe; R. Currier; D. Spencer

    2004-01-01

    Modifications were implemented to the hydrogen flow test rig per safety review comments, and the apparatus was tested for leaks. Tests were then done using Helium/CO{sub 2} mixtures to re-verify performance prior to hydrogen testing. It was discovered that hydrate formation was more difficult to initiate, and new initiation methods were developed to improve the tests. Delivery of ETM hardware continued and buildup of the ETM system continued, the ETM is now mechanically complete. The STU (pilot plant) site selection process was resumed because Tennessee Eastman declined to participate in the program. Two potential sites were visited: The Global Energy/Conoco-Phillips Wabash River Plant, and the Tampa Electric Polk Power Plant.

  5. Ecuador: World Oil Report 1991

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    This paper reports that there has been considerable turbulence in Ecuador's E and P sector over the last year. For instance, Energy Minister Diego Tramariz was replaced by the country's Congress after he raised subsidized fuel prices. Ecuadoran and U.S. environmentalists, meanwhile, raised a firestorm of controversy over the on-again, off- again development of Conoco's Block 16 in Yasuni National Park. Finally, Unocal and PetroCanada this spring terminated their respective drilling operations after fruitless multiwell efforts. New Energy Minister Donald Castillo certainly has his work cut out in attempting to maintain stability in upstream activity. To that end, Castillo has stated that one of his top priorities will be to maintain a good working relationship with foreign operators. He also expected a seventh round of exploratory blocks to be offered before summer's end to shore up activity. Castillo reiterated in public statements that he stands by the administration's existing energy policies, including development of Block 16.

  6. Industry decries sharp decline in U. S. offshore activity

    SciTech Connect (OSTI)

    Not Available

    1992-05-11

    Roadblocks to offshore activity in the U.S. drew much of the spotlight at the 24th Offshore Technology Conference last week in Houston. Among OTC highlights included in this paper are: Two panels reviewed how federal leasing moratoriums and regulatory restrictions are reining U.S. offshore development. Conoco Inc.'s manager of exploration and development in Russia detailed the allure of giant and supergiant fields in the Commonwealth of Independent States and reviewed the status of the company's efforts to negotiate E and D deals with Russian partners. Minerals Management Service officials reviewed environmental challenges facing operators on the U.S. Outer Continental Shelf and new MMS inspection strategies in the Gulf of Mexico. The 1992 OTC Distinguished Achievement Award for companies went to Brazil's Petroleo Brasileiro SA for deepwater development records set with the 3 Marlim well in the Campos basin off Brazil.

  7. Oil companies turn cannibalistic as profits grow but reserves shrink

    SciTech Connect (OSTI)

    Corrigan, R.

    1982-01-02

    Oil company mergers, sales of storage capacity, and slow sales reveal a decline in reserves and a loss of revenues despite the large revenues and profits due to deregulation. Mobil's bid for Marathon Oil and Conoco illustrate the rush for upstream crude-oil supplies. The takeover activity includes small and large companies alike in both the domestic and international markets. Stock-market analysts rate oil companies that are buying secure proven reserves as a good investment. The administration sees no antitrust problem in the mergers, although horizontal mergers receive close scrutiny. Congressional response has been only mildly critical of the oil companies, but a moratorium bill on future mergers could pass in 1982. (DCK)

  8. U.S. DRIVE

    SciTech Connect (OSTI)

    2012-03-16

    U.S. DRIVE, which stands for United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability, is an expanded government-industry partnership among the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company and General Motors; Tesla Motors; five energy companies – BP America, Chevron Corporation, ConocoPhillips, ExxonMobil Corporation, and Shell Oil Products US; two utilities – Southern California Edison and Michigan-based DTE Energy; and the Electric Power Research Institute (EPRI). The U.S. DRIVE mission is to accelerate the development of pre-competitive and innovative technologies to enable a full range of affordable and clean advanced light-duty vehicles, as well as related energy infrastructure.

  9. Overview of FreedomCAR & Fuels Partnership/DOE Delivery Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Delivery Program Mark Paster U.S. Department of Energy Hydrogen, Fuel Cells and Infrastructure Program George Parks ConocoPhillips January, 2005 Important Numbers 1 kg H 2 = 1 gallon gasoline Eff FCV = 2-3 x Eff ICEV = 1.2-1.4 x Eff HEV Energy Density - 10,000 psi H 2 = 1.3 kWhr/l - LH2 = 2.3 kWhr/l - Gasoline = 9.7 kWh/l A Bold New Approach is Required 0 4 8 12 16 20 24 28 32 1970 1980 1990 2000 2010 2020 2030 2040 2050 Petroleum (MMB/Day Oil Equivalent) Actual Projection U.S. Oil Production

  10. Mesaba next-generation IGCC plant

    SciTech Connect (OSTI)

    2006-01-01

    Through a US Department of Energy (DOE) cooperative agreement awarded in June 2006, MEP-I LLC plans to demonstrate a next generation integrated gasification-combined cycle (IGCC) electric power generating plant, the Mesaba Energy Project. The 606-MWe plant (the first of two similarly sized plants envisioned by project sponsors) will feature next-generation ConocoPhillips E-Gas{trademark} technology first tested on the DOE-funded Wabash River Coal Gasification Repowering project. Mesaba will benefit from recommendations of an industry panel applying the Value Improving Practices process to Wabash cost and performance results. The project will be twice the size of Wabash, while demonstrating better efficient, reliability and pollutant control. The $2.16 billion project ($36 million federal cost share) will be located in the Iron Range region north of Duluth, Minnesota. Mesaba is one of four projects selected under Round II of the Clean Coal Power Initiative. 1 fig.

  11. Ultra-Deepwater Production Systems

    SciTech Connect (OSTI)

    K. L. Smith; M. E. Leveque

    2003-09-30

    This report includes technical progress made during the period October, 2002 through September, 2003. At the end of the second technical progress report, the ConocoPhillips opportunities to apply subsea processing in the Gulf of Mexico had been exhausted, and an alternative site was identified in Norway. This was a non-ConocoPhillips operated field, and the subsea processing was proposed as a phased development approach with 2-phase separation at the field, and then gas and liquids exported via pipeline to remote platform locations for processing. Although the unrisked economics were quite favorable, the risked economic evaluation compelled the operator to develop the field with the more conventional and proven Floating Production, Storage and Offloading (FPSO) option. Work on the subsea processing was suspended at this time. Discussions with DOE regarding two other step-change deepwater technologies ensued. One was an effort to develop a light-weight, high pressure composite production riser. A field demonstration of the design would then be performed by deploying a limited number of composite joints in a Gulf of Mexico deepwater development. The other was to begin the process of taking drilling with casing technology to the deepwater. This is called, ''close-tolerance liner drilling''. It was agreed that both technologies should be pursued, and the work began. During this reporting period, the initial production riser design had been completed and preliminary test sample components were being fabricated. Regarding the liner drilling, the sub-contractors were selected, the design basis was agreed and designs progressed towards meeting a projected first quarter, 2004 onshore test program.

  12. Intrinsic and accelerated anaerobic biodegradation of perchloroethylene in groundwater

    SciTech Connect (OSTI)

    Buchanan, R.J. Jr.; Ellis, D.E.; Odom, J.M.; Lee, M.D.; Mazierski, P.F.

    1995-12-31

    The DuPont Niagara Falls Plant is located in a heavily industrialized area of Niagara Falls, New York, adjacent to the Niagara River. The plant has been in continuous operation since 1898 and manufactured various organic and inorganic chemicals. Chlorinated solvents were produced from 1930 to 1975 at the plant. Numerous hydrogeologic investigations have described the subsurface hydrogeology and indicated that the groundwater underlying the plant was impacted by a variety of chlorinated aliphatic hydrocarbons in a wide range of concentrations. DuPont initiated in-field evaluations to determine whether biological reductive anaerobic dechlorination was occurring naturally and, if so, whether such dechlorination could be enhanced in situ. A field program was subsequently implemented could be enhanced in situ. A field program was subsequently implemented in a preselected area of the plant through use of an in situ borehole bioreactor to attempt to stimulate indigenous biological reductive dechlorination of chlorinated aliphatics by the addition of yeast extract (substrate) and sulfate (electron acceptor). At this location, a very active microbial population developed, which reduced the in situ concentrations of chlorinated aliphatic compounds by more than 94%, but did not increase the typical biological degradation products. This may have been due to an alternative biological degradation pathway or to very rapid biological kinetics. Efforts to elucidate this mechanism have been initiated under a separate laboratory program.

  13. Results of a ground-water and DNAPL recovery and containment strategy

    SciTech Connect (OSTI)

    Mazierski, P.F.; Connor, J.M. )

    1993-10-01

    Ground-water contamination and dense nonaqueous phase liquids (DNAPL) were discovered at the DuPont Necco Park Landfill in Niagara Falls, New York, shortly after the facility was closed in the late 1970s. The facility received a variety of solid and liquid process wastes, including chlorinated volatile and semivolatile organic compounds. A number of proactive response activities--including the operation of a ground-water recovery system, installation of a grout curtain, and DNAPL recovery--were implemented by DuPont concurrent with site characterization. These efforts minimized off-site contaminant migration and removed most of the recoverable free-phase DNAPL prior to completion of the full site characterization. Site investigations to characterize hydrogeologic controls over occurrence and migration of ground water and DNAPL revealed with distinct water-bearing zones beneath the site. A DNAPL recovery program, using gas-driven pump assemblies, was initiated in early 1989 at a small group of wells where DNAPL was frequently observed. The volume of recovered DNAPL declined over the next four years from a peak of 397 gallons per month in 1989 to little or no recovery in recent months.

  14. New mammography screen/film combinations: Imaging characteristics and radiation dose

    SciTech Connect (OSTI)

    Kimme-Smith, C.; Bassett, L.W.; Gold, R.H.; Zheutlin, J.; Gornbein, J.A. )

    1990-04-01

    Five types of film (Kodak OM, Kodak OM-SO177, Konica CM, Dupont Microvision, and Fuji MiMa) exposed in combination with seven different intensifying screens (Min R, Min R Medium, Siemens Orthox MA, Kyokka HR Mammo Fine, Agfa Gevaert Detail S (old and new), and Konica Monarch) were processed for either 90 sec (at 33.3{degrees}C) or 3 min (at 35.0 degrees C). The films imaged a Computerized Imaging Reference System phantom with additional detail test objects placed on its surface to produce four groups of objects with which to evaluate resolution and contrast. For objects that tested resolution, the Kyokka HR Mammo Fine (Fuji) screen was statistically significantly superior; for objects that tested contrast, the Konica Monarch screen was statistically significantly superior. Extended processing did not affect Dupont and Kodak OM film as much as it affected the other films. It did affect contrast for the other films tested. The mean glandular doses from gridless exposures ranged from 32 to 80 mrad (0.32-0.80 mGy) over all film/screen/processing combinations for a 4.5-cm-thick test object. Several new film/screen combinations can provide images superior to the Kodak Min R/OM combination at a reduced radiation dose. The Kyokka HR Mammo Fine (Fuji) screen was found statistically superior in radiographic resolution of mammographic test objects and the Konica Monarch screen was found to be superior in defining contrast.

  15. US adopts {open_quote}Wise{close_quote} program to combat global warming

    SciTech Connect (OSTI)

    Herman, P.; Kenchington, H.

    1996-12-31

    Relying on their Yankee ingenuity, some 60 American companies have pledged to reduce greenhouse-gas emissions by more than 5 million metric tons by 2000. Inspired by the Clinton administration`s Climate Change Action Plan, companies such as Dupont and General Motors have joined with the Department of Energy and the Environmental Protection Agency to implement voluntary reductions in pollution, say Pamela Herman and Hank Kenchington, co-directors of the Climate Wise Program. {open_quotes}Climate Wise provides a flexible program that encourages industries to put forth their best ideas. The government, in turn, offers companies access to technical information and help in learning from the experience of others,{close_quotes} the authors say. Conservation of resources translates into financial savings as well. In curbing its emissions of greenhouse gases, Dupont {open_quotes}anticipates savings $30 million this year,{close_quotes} say Herman and Kechington. As a result, such cooperative initiatives as Climate Wise boost both the nation`s productivity and competitiveness.

  16. Final Technical Report: Improvement of Zymomonas mobilis for Commercial Use in Corn-based Biorefineries

    SciTech Connect (OSTI)

    Hitz, William D.

    2010-12-07

    Between 2007 and 2010 DuPont conducted a program under DOE award DE-FC36-07GO17056 to develop and improve Zymomonas mobilis as an ethanologen for commercial use in biorefineries to produce cellulosic ethanol. This program followed upon an earlier DOE funded program in which DuPont, in collaboration with the National Renewable Energy Laboratory (NREL) had developed a Zymomonas strain in conjunction with the development of an integrated cellulosic ethanol process. In the current project, we sought to maximize the utility of Zymomonas by adding the pathway to allow fermentation of the minor sugar arabinose, improve the utilization of xylose, improve tolerance to process hydrolysate and reduce the cost of producing the ethanologen. We undertook four major work streams to address these tasks, employing a range of approaches including genetic engineering, adaptation, metabolite and pathway analysis and fermentation process development. Through this project, we have developed a series of strains with improved characteristics versus the starting strain, and demonstrated robust scalability to at least the 200L scale. By a combination of improved ethanol fermentation yield and titer as well as reduced seed train costs, we have been able to reduce the capital investment and minimum ethanol selling price (MESP) by approximately 8.5% and 11% respectively vs. our starting point. Furthermore, the new strains we have developed, coupled with the learnings of this program, provide a platform for further strain improvements and advancement of cellulosic ethanol technology.

  17. Optimizing the transverse thermal conductivity of 2D-SiCf/SiC composites, II. Experimental

    SciTech Connect (OSTI)

    Youngblood, Gerald E; Senor, David J; Jones, Russell H; Kowbel, W

    2002-12-31

    Model predictions of the transverse thermal conductivity (Keff) are compared to experimentally determined values as a function of temperature for a commercial 2D-SiCf/SiC made by DuPont from plain weave Hi-Nicalon fabric and with an ICVI-SiC matrix. Two versions of the DuPont composite were examined: one with a “thin” and one with a “thick” pyrolytic carbon coating of thickness 0.110 m and 1.044 m, respectively. Generally good agreement of the model predictions with measured values of Keff suggest that these models can be used to predict Keff for composites with various “non-ideal” fiber, interphase and matrix structures. Importantly, the models make it possible to separate the relative component contributions to Keff so that individual component degradation mechanisms can be examined in detail. Then, based on specific knowledge of the component degradation, the models can used to predict Keff-values for composites subjected to irradiation, oxidation, thermal cycling, or other thermal or mechanical stress treatments. Finally, model predictions were examined to suggest specific design and/or development efforts directed to optimize the overall thermal transport performance of 2D-SiCf/SiC.

  18. Response Predicting LTCC Firing Shrinkage: A Response Surface Analysis Study

    SciTech Connect (OSTI)

    Girardi, Michael; Barner, Gregg; Lopez, Cristie; Duncan, Brent; Zawicki, Larry

    2009-02-25

    The Low Temperature Cofired Ceramic (LTCC) technology is used in a variety of applications including military/space electronics, wireless communication, MEMS, medical and automotive electronics. The use of LTCC is growing due to the low cost of investment, short development time, good electrical and mechanical properties, high reliability, and flexibility in design integration (3 dimensional (3D) microstructures with cavities are possible)). The dimensional accuracy of the resulting x/y shrinkage of LTCC substrates is responsible for component assembly problems with the tolerance effect that increases in relation to the substrate size. Response Surface Analysis was used to predict product shrinkage based on specific process inputs (metal loading, layer count, lamination pressure, and tape thickness) with the ultimate goal to optimize manufacturing outputs (NC files, stencils, and screens) in achieving the final product design the first time. Three (3) regression models were developed for the DuPont 951 tape system with DuPont 5734 gold metallization based on green tape thickness.

  19. Commercialization of Turbulent Combustion Code CREBCOM for Chemical Industry Safety

    SciTech Connect (OSTI)

    Rohatgi, Upendra

    2007-06-30

    This program developed the Kurchatov Institute’s CREBCOM (CRiteria and Experimentally Based COMbustion) code to the point where it could be commercialized and marketed for the special applications described above, as well as for general purpose combustion calculations. The CREBCOM code uses a different approach to model the explosion phenomenon. The code models, with full 3D gas dynamics, the development of an explosion in three characteristics regimes: a) slow flames, b) fast flames, and c) detonation. The transition from one regime to another is governed by a set of empirical criteria and correlations. As part of the commercialization, the code was validated with the use of experimental data. The experimental data covered a range of thermodynamic initial conditions and apparatus scale. Proprietary experimental data were provided to the Kurchatov Institute by the DuPont for this purpose. The flame acceleration and detonation data was obtained from experiments in methane and oxygen enriched air mixtures carried out in two vessels with diameters of 20 and 27 cm. The experimental data covers a wide spectrum of initial temperature (20-525C) and pressure (1-3 atm). As part of this program, the Kurchatov Institute performed experiments in a 52 cm vessel in mixtures of methane-air at room temperature and pressure to be used in the validation of the code. The objective of these tests was to obtain frame acceleration data at a scale close to that found in actual industrial processes. BNL was responsible for managing the DOE/IPP portion of the program, and for satisfying DOE reporting requirements. BNL also participated in an independent assessment of the CREBOM code. DuPont provided proprietary experimental data to the Kurchatov Institute on flame acceleration and detonation in high temperature methane and oxygen enriched air mixtures in addition to the matching fund. In addition, DuPont also supplied to KI instrumentation for pressure and temperature measurement

  20. Real Time Flame Monitoring of Gasifier and Injectors

    SciTech Connect (OSTI)

    Zelepouga, Serguei; Saveliev, Alexei

    2011-12-31

    This project is a multistage effort with the final goal to develop a practical and reliable nonintrusive gasifier injector monitor to assess burner wear and need for replacement. The project team included the National Energy Technology Laboratory (NETL), Gas Technology Institute (GTI), North Carolina State University, and ConocoPhillips. This report presents the results of the sensor development and testing initially at GTI combustion laboratory with natural gas flames, then at the Canada Energy Technology Center (CANMET), Canada in the atmospheric coal combustor as well as in the pilot scale pressurized entrained flow gasifier, and finally the sensor capabilities were demonstrated at the Pratt and Whitney Rocketdyne (PWR) Gasifier and the Wabash River Repowering plant located in West Terre Haute, IN. The initial tests demonstrated that GTI gasifier sensor technology was capable of detecting shape and rich/lean properties of natural gas air/oxygen enriched air flames. The following testing at the Vertical Combustor Research Facility (VCRF) was a logical transition step from the atmospheric natural gas flames to pressurized coal gasification environment. The results of testing with atmospheric coal flames showed that light emitted by excited OH* and CH* radicals in coal/air flames can be detected and quantified. The maximum emission intensities of OH*, CH*, and black body (char combustion) occur at different axial positions along the flame length. Therefore, the excitation rates of CH* and OH* are distinct at different stages of coal combustion and can be utilized to identify and characterize processes which occur during coal combustion such as devolatilization, char heating and burning. To accomplish the goals set for Tasks 4 and 5, GTI utilized the CANMET Pressurized Entrained Flow Gasifier (PEFG). The testing parameters of the PEFG were selected to simulate optimum gasifier operation as well as gasifier conditions normally resulting from improper operation or

  1. Evaluation of Ultra Clean Fuels from Natural Gas

    SciTech Connect (OSTI)

    Robert Abbott; Edward Casey; Etop Esen; Douglas Smith; Bruce Burke; Binh Nguyen; Samuel Tam; Paul Worhach; Mahabubul Alam; Juhun Song; James Szybist; Ragini Acharya; Vince Zello; David Morris; Patrick Flynn; Stephen Kirby; Krishan Bhatia; Jeff Gonder; Yun Wang; Wenpeng Liu; Hua Meng; Subramani Velu; Jian-Ping Shen, Weidong Gu; Elise Bickford; Chunshan Song; Chao-Yang Wang; Andre' Boehman

    2006-02-28

    ConocoPhillips, in conjunction with Nexant Inc., Penn State University, and Cummins Engine Co., joined with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) in a cooperative agreement to perform a comprehensive study of new ultra clean fuels (UCFs) produced from remote sources of natural gas. The project study consists of three primary tasks: an environmental Life Cycle Assessment (LCA), a Market Study, and a series of Engine Tests to evaluate the potential markets for Ultra Clean Fuels. The overall objective of DOE's Ultra Clean Transportation Fuels Initiative is to develop and deploy technologies that will produce ultra-clean burning transportation fuels for the 21st century from both petroleum and non-petroleum resources. These fuels will: (1) Enable vehicles to comply with future emission requirements; (2) Be compatible with the existing liquid fuels infrastructure; (3) Enable vehicle efficiencies to be significantly increased, with concomitantly reduced CO{sub 2} emissions; (4) Be obtainable from a fossil resource, alone or in combination with other hydrocarbon materials such as refinery wastes, municipal wastes, biomass, and coal; and (5) Be competitive with current petroleum fuels. The objectives of the ConocoPhillips Ultra Clean Fuels Project are to perform a comprehensive life cycle analysis and to conduct a market study on ultra clean fuels of commercial interest produced from natural gas, and, in addition, perform engine tests for Fisher-Tropsch diesel and methanol in neat, blended or special formulations to obtain data on emissions. This resulting data will be used to optimize fuel compositions and engine operation in order to minimize the release of atmospheric pollutants resulting from the fuel combustion. Development and testing of both direct and indirect methanol fuel cells was to be conducted and the optimum properties of a suitable fuel-grade methanol was to be defined. The results of the study are also applicable

  2. Review of the findings of the Ignik Sikumi CO2-CH4 gas hydrate exchange field trial

    SciTech Connect (OSTI)

    Anderson, Brian J.; Boswell, Ray; Collett, Tim S.; Farrell, Helen; Ohtsuka, Satoshi; White, Mark D.

    2014-08-01

    The Ignik Sikumi Gas Hydrate Exchange Field Trial was conducted by ConocoPhillips in partnership with the U.S. Department of Energy, the Japan Oil, Gas, and Metals National Corporation, and the U.S. Geological Survey within the Prudhoe Bay Unit on the Alaska North Slope (ANS) during 2011 and 2012. The 2011 field program included drilling the vertical test well and performing extensive wireline logging through a thick section of gas-hydrate-bearing sand reservoirs that provided substantial new insight into the nature of ANS gas hydrate occurrences. The 2012 field program involved an extended, scientific field trial conducted within a single vertical well (“huff-and-puff” design) through three primary operational phases: 1) injection of a gaseous phase mixture of CO2, N2, and chemical tracers; 2) flowback conducted at down-hole pressures above the stability threshold for native CH4-hydrate, and 3) extended (30-days) flowback at pressures below the stability threshold of native CH4-hydrate. Ignik Sikumi represents the first field investigation of gas hydrate response to chemical injection, and the longest-duration field reservoir response experiment yet conducted. Full descriptions of the operations and data collected have been fully reported by ConocoPhillips and are available to the science community. The 2011 field program indicated the presence of free water within the gas hydrate reservoir, a finding with significant implications to the design of the exchange trial – most notably the use of a mixed gas injectant. While this decision resulted in a complex chemical environment within the reservoir that greatly tests current experimental and modeling capabilities – without such a mixture, it is apparent that injection could not have been achieved. While interpretation of the field data are continuing, the primary scientific findings and implications of the program are: 1) gas hydrate destabilizing is self-limiting, dispelling any notion of the potential for

  3. Chemical gel barriers as low-cost alternative to containment and in situ cleanup of hazardous wastes to protect groundwater

    SciTech Connect (OSTI)

    1997-01-01

    Chemical gel barriers are being considered as a low-cost alternative for containment and in situ cleanup of hazardous wastes to protect groundwater. Most of the available gels in petroleum application are non-reactive and relative impermeable, providing a physical barriers for all fluids and contaminants. However, other potential systems can be envisioned. These systems could include gels that are chemically reactive and impermeable such that most phase are captured by the barriers but the contaminants could diffuse through the barriers. Another system that is chemically reactive and permeable could have potential applications in selectivity capturing contaminants while allowing water to pass through the barriers. This study focused on chemically reactive and permeable gel barriers. The gels used in experiment are DuPont LUDOX SM colloidal silica gel and Pfizer FLOPAAM 1330S hydrolyzed polyacrylamide (HPAM) gel.

  4. The importance of water control to PEM fuel cell performance

    SciTech Connect (OSTI)

    Cisar, A.; Murphy, O.J.; Simpson, S.F.

    1996-12-31

    All membranes currently in use in polymer electrolyte membrane (PEM) fuel cells have sulfonate (-SO{sub 3}{sup -}) groups as the anionic functionalities attached to the backbone of the polymer electrolyte. As a consequence of this fact, all PEM membranes depend on the presence of water in the electrolyte to facilitate proton transport. This includes perfluorinated membranes, such as Nafion{reg_sign} (DuPont), and Gore Select{trademark} (W. L. Gore), partially fluorinated membranes, such as the Ballard membrane, which is a derivatized trifluorostyrene, non-fluorinated membranes, including both sulfonated polyparaphenylene (Maxdem`s Poly-X{trademark}) and sulfonated styrene-butadiene (DAIS), and the various grafted materials that have been described in the literature. In every case, without water, the proton conductivity of the membrane is insufficient to support fuel cell operation.

  5. Development of an integrated in-situ remediation technology. Draft topical report for Task {number_sign}7.2 entitled ``Field scale test`` (January 10, 1996--December 31, 1997)

    SciTech Connect (OSTI)

    Athmer, C.; Ho, S.V.; Hughes, B.M.

    1997-11-01

    Contamination in low-permeability soils poses a significant technical challenge to in-situ remediation efforts. Poor accessibility to the contaminants and difficulty in delivery of treatment reagents have rendered existing in-situ treatments such as bioremediation, vapor extraction, and pump and treat rather ineffective when applied to low permeability soils present at many contaminated sites. The technology is an integrated in-situ treatment in which established geotechnical methods are used to install degradation zones directly in the contaminated soil and electro-osmosis is utilized to move the contaminants back and forth through those zones until the treatment is completed. The present Topical Report for Task {number_sign}7.2 summarizes the Field Scale Test conducted by Monsanto Company, DuPont, and General Electric.

  6. Solution-Procesed Small-Molecule OLED Luminaire for Interior Illumination

    SciTech Connect (OSTI)

    Parker, Ian

    2012-02-29

    Prototype lighting panels and luminaires were fabricated using DuPont Displays solution-processed small-molecule OLED technology. These lighting panels were based on a spatially-patterned, 3-color design, similar in concept to an OLED display panel, with materials chosen to maximize device efficacy. The majority of the processing steps take place in air (rather than high vacuum). Optimization of device architecture, processing and construction was undertaken, with a final prototype design of 50 cm{sup 2} being fabricated and tested. Performance of these panels reached 35 lm/W at illuminant-A. A unique feature of this technology is the ability to color tune the emission, and color temperatures ranging from 2700 to > 6,500K were attained in the final build. Significant attention was paid to low-cost fabrication techniques.

  7. Casimir-Polder interaction between an atom and an infinite boundary in a thermal bath

    SciTech Connect (OSTI)

    She Wuying; Yu Hongwei; Zhu Zhiying

    2010-01-15

    We study the energy level shift of a static two-level atom interacting with a massless scalar field in a thermal bath with the presence of a plane boundary, which gives rise to the Casimir-Polder force. We separately calculate contributions of both thermal fluctuations and radiation reaction using the formalism suggested by J. Dalibard, J. Dupont-Roc, and C. Cohen-Tannoudji [J. Phys. (France) 43, 1617 (1982); 45, 673 (1984)] and analyze in detail the behaviors of the total energy level shifts in three distinct distance regimes in both the low- and high-temperature limits. A comparison of our results with those of a uniformly accelerated atom reveals that uniformly accelerated atoms, in general, do not behave the same as static ones in a thermal bath at the Unruh temperature in terms of the atomic energy level shifts.

  8. Stream flow and analysis study

    SciTech Connect (OSTI)

    Jackson, D.G.

    1983-11-04

    Lockwood Greene Engineers, Inc. (LGE) was retained by E.I. duPont de Nemours and Co., Inc., Savannah River Plant, Aiken, South Carolina, to conduct on-site flow measurements and sampling of tributaries and outfalls flowing into a portion of Tim`s Branch Creek. Water samples were analyzed for chemical characteristics. This report presents the results of the flow and analytical data collected during the 24 hour monitoring period, October 5 and 6, 1983. Tim`s Branch Creek is a tributary of the Upper Three Runs Creek which in turn is a tributary of the Savannah River. A map outlining the drainage area within the Savannah River Plant is included in this report.

  9. Weldability of High Alloys

    SciTech Connect (OSTI)

    Maroef, I

    2003-01-22

    The purpose of this study was to investigate the effect of silicon and iron on the weldability of HAYNES HR-160{reg_sign} alloy. HR-I60 alloy is a solid solution strengthened Ni-Co-Cr-Si alloy. The alloy is designed to resist corrosion in sulfidizing and other aggressive high temperature environments. Silicon is added ({approx}2.75%) to promote the formation of a protective oxide scale in environments with low oxygen activity. HR-160 alloy has found applications in waste incinerators, calciners, pulp and paper recovery boilers, coal gasification systems, and fluidized bed combustion systems. HR-160 alloy has been successfully used in a wide range of welded applications. However, the alloy can be susceptible to solidification cracking under conditions of severe restraint. A previous study by DuPont, et al. [1] showed that silicon promoted solidification cracking in the commercial alloy. In earlier work conducted at Haynes, and also from published work by DuPont et al., it was recognized that silicon segregates to the terminal liquid, creating low melting point liquid films on solidification grain boundaries. Solidification cracking has been encountered when using the alloy as a weld overlay on steel, and when joining HR-160 plate in a thickness greater than19 millimeters (0.75 inches) with matching filler metal. The effect of silicon on the weldability of HR-160 alloy has been well documented, but the effect of iron is not well understood. Prior experience at Haynes has indicated that iron may be detrimental to the solidification cracking resistance of the alloy. Iron does not segregate to the terminal solidification product in nickel-base alloys, as does silicon [2], but iron may have an indirect or interactive influence on weldability. A set of alloys covering a range of silicon and iron contents was prepared and characterized to better understand the welding metallurgy of HR-160 alloy.

  10. Modeling the Transverse Thermal Conductivity of 2-D SiCf/SiC Composites Made with Woven Fabric

    SciTech Connect (OSTI)

    Youngblood, Gerald E.; Senor, David J.; Jones, Russell H.

    2004-06-30

    The hierarchical two-layer (H2L) model was developed to describe the effective transverse thermal conductivity, Keff, of a 2D-SiCf/SiC composite made from stacked and infiltrated woven fabric layers in terms of constituent properties and microstructural and architectural variables. The H2L model includes the expected effects of fiber-matrix interfacial conductance as well as the effects of high fiber packing fractions within individual tows and the non-uniform nature of 2D-fabric layers that usually include a significant amount of interlayer porosity. Previously, H2L model predictions were compared to measured values of Keff for two versions of DuPont 2D-Hi NicalonÔ/PyC/ICVI-SiC composite, one with a “thin” (0.110 μm) and the other with a “thick” (1.040 μm) pyrocarbon (PyC) fiber coating, and for a 2D-TyrannoÔ SA/”thin” PyC/FCVI-SIC composite made by ORNL. In this study, H2L model predictions are compared to measured Keff-values for a 2D-SiCf/SiC composite made by GE Power Systems (formerly DuPont Lanxide) using the ICVI-process with Hi-NicalonÔ type S fabric. The values of Keff determined for the composite made with the Hi-NicalonÔ type S fabric were significantly greater than Keff-values determined for the composites made with either the Hi-NicalonÔor the TyrannoÔ SA fabrics. Differences in Keff-values were expected for using different fiber types, but major differences also were due to observed microstructural variations between the systems, and as predicted by the H2L model.

  11. STATEMENT OF

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    that they had little experience in acquiring charter aircraft suitable for international travel, and that because of pressing time constraints, they were unable to acquire the...

  12. Direct production of hydrogen and aromatics from methane or natural gas: Review of recent U.S. patents

    SciTech Connect (OSTI)

    Lucia M. Petkovic; Daniel M. Ginosar

    2012-03-01

    Since the year 2000, the United States Patent and Trademark Office (USPTO) has granted a dozen patents for inventions related to methane dehydroaromatization processes. One of them was granted to UOP LLC (Des Plaines). It relates to a catalyst composition and preparation method. Two patents were granted to Conoco Phillips Company (Houston, TX). One was aimed at securing a process and operating conditions for methane aromatization. The other was aimed at securing a process that may be integrated with separation of wellhead fluids and blending of the aromatics produced from the gas with the crude. Nine patents were granted to ExxonMobil Chemical Patents Inc. (Houston, TX). Most of these were aimed at securing a dehydroaromatization process where methane-containing feedstock moves counter currently to a particulate catalyst. The coked catalyst is heated or regenerated either in the reactor, by cyclic operation, or in annex equipment, and returned to the reactor. The reactor effluent stream may be separated in its main components and used or recycled as needed. A brief summary of those inventions is presented in this review.

  13. C1 CHEMISTRY FOR THE PRODUCTION OF ULTRA-CLEAN LIQUID TRANSPORTATION FUELS AND HYDROGEN

    SciTech Connect (OSTI)

    Gerald P. Huffman

    2004-03-31

    Faculty and students from five universities--the University of Kentucky, University of Pittsburgh, University of Utah, West Virginia University, and Auburn University--are collaborating in a research program to develop C1 chemistry processes to produce ultra-clean liquid transportation fuels and hydrogen, the zero-emissions transportation fuel of the future. The feedstocks contain one carbon atom per molecular unit. They include synthesis gas (syngas), a mixture of carbon monoxide and hydrogen produced by coal gasification or reforming of natural gas, methane, methanol, carbon dioxide, and carbon monoxide. An important objective is to develop C1 technology for the production of liquid transportation fuel and hydrogen from domestically plentiful resources such as coal, coalbed methane, and natural gas. An Industrial Advisory Board with representatives from Chevron-Texaco, Eastman Chemical, Conoco-Phillips, the Air Force Research Laboratory, the U.S. Army National Automotive Center (Tank & Automotive Command--TACOM), and Tier Associates provides guidance on the practicality of the research. The current report presents results obtained in this research program during the six months of the subject contract from October 1, 2002 through March 31, 2003. The results are presented in thirteen detailed reports on research projects headed by various faculty members at each of the five CFFS Universities. Additionally, an Executive Summary has been prepared that summarizes the principal results of all of these projects during the six-month reporting period.

  14. C1 Chemistry for the Production of Ultra-Clean Liquid Transportation Fuels and Hydrogen

    SciTech Connect (OSTI)

    Gerald P. Huffman

    2005-03-31

    Faculty and students from five universities--the University of Kentucky, University of Pittsburgh, University of Utah, West Virginia University, and Auburn University--are collaborating in a research program to develop C1 chemistry processes to produce ultra-clean liquid transportation fuels and hydrogen, the zero-emissions transportation fuel of the future. The feedstocks contain one carbon atom per molecular unit. They include synthesis gas (syngas), a mixture of carbon monoxide and hydrogen produced by coal gasification or reforming of natural gas, methane, methanol, carbon dioxide, and carbon monoxide. An important objective is to develop C1 technology for the production of liquid transportation fuel and hydrogen from domestically plentiful resources such as coal, coalbed methane, and natural gas. An Industrial Advisory Board with representatives from Chevron-Texaco, Eastman Chemical, Conoco-Phillips, the Air Force Research Laboratory, the U.S. Army National Automotive Center (Tank & Automotive Command--TACOM), and Tier Associates provides guidance on the practicality of the research. The current report presents results obtained in this research program during the six months of the subject contract from October 1, 2002 through March 31, 2003. The results are presented in thirteen detailed reports on research projects headed by various faculty members at each of the five CFFS Universities. Additionally, an Executive Summary has been prepared that summarizes the principal results of all of these projects during the six-month reporting period.

  15. C1 Chemistry for the Production of Ultra-Clean Liquid Transportation Fuels and Hydrogen

    SciTech Connect (OSTI)

    Gerald P. Huffman

    2003-03-31

    Faculty and students from five universities--the University of Kentucky, University of Pittsburgh, University of Utah, West Virginia University, and Auburn University--are collaborating in a research program to develop C1 chemistry processes to produce ultra-clean liquid transportation fuels and hydrogen, the zero-emissions transportation fuel of the future. The feedstocks contain one carbon atom per molecular unit. They include synthesis gas (syngas), a mixture of carbon monoxide and hydrogen produced by coal gasification or reforming of natural gas, methane, methanol, carbon dioxide, and carbon monoxide. An important objective is to develop C1 technology for the production of transportation fuel from domestically plentiful resources such as coal, coalbed methane, and natural gas. An Industrial Advisory Board with representatives from Chevron-Texaco, Eastman Chemical, Conoco-Phillips, Energy International, the Department of Defense, and Tier Associates provides guidance on the practicality of the research. The current report presents results obtained in this research program during the first six months of the subject contract (DE-FC26-02NT-4159), from October 1, 2002 through March 31, 2003.

  16. Cost and performance baseline for fossil energy plants

    SciTech Connect (OSTI)

    2007-05-15

    The objective of this report is to present performance and cost data for fossil energy power systems, specifically integrated gasification combined cycle (IGCC), pulverized coal (PC), and natural gas combined cycle (NGCC) plants, in a consistent technical and economic manner that accurately reflects current market conditions for plants starting operation in 2010. This is Volume 2 of the three-volume report. Twelve different power plant design configurations were analyzed. These include six IGCC cases utilizing the General Electric Energy (GEE), ConocoPhillips (CoP), and Shell gasifiers each with and without CO{sub 2} capture, and six cases representing conventional technologies: PC-subcritical, PC-supercritical, and NGCC plants both with and without CO{sub 2} capture. Cases 7 and 8 were originally included in this study and involve production of synthetic natural gas (SNG) and the repowering of an existing NGCC facility using SNG. The two SNG cases were subsequently moved to Volume 2 of this report resulting in the discontinuity of case numbers (1-6 and 9-14). Chapter 2 provides the basis for technical, environmental and cost evaluations. Chapter 3 describes the IGCC technologies modeled and presents the results for the six IGCC cases. Chapter 4 describes the PC technologies modeled and presents the results for the four PC cases. Chapter 5 described the NGCC technologies modeled and presents the results for the two NGCC cases. Chapter 6 contains the reference list. 64 refs., 253 exhibits.

  17. Technology Transfer Plan

    SciTech Connect (OSTI)

    1998-12-31

    BPF developed the concept of a mobile, on-site NORM remediation and disposal process in late 1993. Working with Conoco and receiving encouragement born the Department of Energy, Metarie Office, and the Texas Railroad Commission the corporation conducted extensive feasibility studies on an on-site disposal concept. In May 1994, the Department of Energy issued a solicitation for cooperative agreement proposal for, "Development and Testing of a Method for Treatment and Underground Disposal of Naturally Occurring Radioactive Materials (NORM)". BPF submitted a proposal to the solicitation in July 1994, and was awarded a cooperative agreement in September 1995. BPF proposed and believed that proven equipment and technology could be incorporated in to a mobile system. The system would allow BPF to demonstrate an environmentally sound and commercially affordable method for treatment and underground disposal of NORM. The key stop in the BPF process incorporates injection of the dissolved radioactive materials into a water injection or disposal well. Disposal costs in the BPF proposal of July 1995 were projected to range from $1000 to $5000 per cubic yard. The process included four separate steps. (1) De-oiling (2) Volume Reduction (3) Chemical Dissolution of the Radium (4) Injection

  18. TRU decontamination of high-level Purex waste by solvent extraction using a mixed octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide/TBP/NPH (TRUEX) solvent

    SciTech Connect (OSTI)

    Horwitz, E.P.; Kalina, D.G.; Diamond, H.; Kaplan, L.; Vandegrift, G.F.; Leonard, R.A.; Steindler, M.J.; Schulz, W.W.

    1984-01-01

    The TRUEX (transuranium extraction) process was tested on a simulated high-level dissolved sludge waste (DSW). A batch counter-current extraction mode was used for seven extraction and three scrub stages. One additional extraction stage and two scrub stages and all strip stages were performed by batch extraction. The TRUEX solvent consisted of 0.20 M octyl(phenyl)-N,N-diisobutylcarbamoyl-methylphosphine oxide-1.4 M TBP in Conoco (C/sub 12/-C/sub 14/). The feed solution was 1.0 M in HNO/sub 3/, 0.3 M in H/sub 2/C/sub 2/O/sub 4/ and contained mixed (stable) fission products, U, Np, Pu, and Am, and a number of inert constituents, e.g., Fe and Al. The test showed that the process is capable of reducing the TRU concentration in the DSW by a factor of 4 x 10/sup 4/ (to <100 nCi/g of disposed form) and reducing the quantity of TRU waste by two orders of magnitude.

  19. North Dakota`s Dickinson Lodgepole discovery: A Preliminary exploration model

    SciTech Connect (OSTI)

    LeFever, J.A.; Halabura, S.P.; Martiniuk, C.D.; Fischer, D.W.

    1995-08-14

    Interest in the Mississippian Lodgepole formation of North Dakota has intensified since the successful completion of the Duncan Oil Inc. 1-11 Knopik flowing 2,707 b/d of oil and 1.55 MMcfd of gas 430 cu m of oil and 43,891 cu m of gas. The play began when Conoco drilled an in-field wildcat in an attempt to establish deeper production in Dickinson oil field. The discovery well, 74 Dickinson State, was completed in a clean lower Lodgepole limestone section that is thought to represent a Waulsortian mound. The most important questions asked concerning the Lodgepole play are whether or not it will step out of the Dickinson area, what are the factors that control the development of these mounds, what controlled the development of the reservoir and trap, and how it was charged with oil. Other than the reservoir section, the most significant feature observed from wireline logs of the area is the anomalously thick Bakken formation (Mississippian-Devonian). This observation is important to understanding the Lodgepole play and can be used to help explore for similar features elsewhere in the basin. The paper describes the regional setting, the Lodgepole stratigraphy, deposition, regional equivalents, and a salt collapse model that can readily explain the features observed at the Dickinson field.

  20. Feasibility study of the seismic reflection method in Amargosa Desert, Nye County, Nevada

    SciTech Connect (OSTI)

    Brocher, T.M.; Hart, P.E.; Carle, S.F.

    1990-11-01

    The US Geological Survey (USGS) working under an Interagency agreement with the Department of Energy is engaged in a broad geoscience program to assess and identify a potential repository for high level nuclear waste at Yucca Mountain, Nye County, Nevada. The USGS program, referred to as the Yucca Mountain Project, or YMP, consists of integrated geologic, hydrologic and geophysical studies which range in nature from site specific to regional. This report is an evaluation of different acquisition methods for future regional seismic reflection studies to be conducted in the vicinity of Yucca Mountain, located in the southwestern corner of the Nevada Test Site (NTS). In January 1988, field studies were conducted to investigate the feasibility of using the common-depth point (CDP) seismic reflection method to map subsurface geological horizons within the Amargosa Desert, Nye County, Nevada. The goal of the field study was to investigate which seismic reflection method(s) should be used for mapping shallow to lower-crustal horizons. Therefore, a wide-variety of field acquisition parameters were tested, included point versus linear receiver group arrays; Vibroseis (service and trademark of Conoco, Inc.) versus explosive sources; Vibroseis array patterns; and Vibroseis sweep and frequency range. 31 refs., 33 figs., 8 tabs.

  1. Corrosion, sulfidation resistance: a prime target

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    Metals performance inside gasifier reactors or in off-gas locations seemed most dependent upon the process itself. Relatively benign conditions such as those found in the CONOCO COAL, HYGAS, and SYNTHANE gasifier reactors may preclude the need for exotic alloys, clads and/or coatings. More aggressive high-temperature evironments may require avoidance of internal piping/valving in scale-up designs. In most every plant studied, low chromium, nickel-base alloys such as those represented by INCONEL 600 and MONEL 400 performed erratically. Even though such materials may not be specified for components, they invariably appear as weldments, often causing problems in the initial material selection sought to avoid. In quench and purification sections of the pilot plants studied, austenitic stainless steels performed very well. Where high temperatures (800+ F) are not involved, the low carbon variants are advisable to minimize the possibility of stress corrosoion cracking due to the presence of liquid phases either incident to normal operation or resulting from condensate during off-line periods. Although stress corrosion cracking was not observed in prestressed specimens, it has been reported at several of the same pilot plant locations in which the MPC exposures were made.

  2. OPTIMIZATION OF INFILL DRILLING IN NATURALLY-FRACTURED TIGHT-GAS RESERVOIRS

    SciTech Connect (OSTI)

    Lawrence W. Teufel; Her-Yuan Chen; Thomas W. Engler; Bruce Hart

    2004-05-01

    A major goal of industry and the U.S. Department of Energy (DOE) fossil energy program is to increase gas reserves in tight-gas reservoirs. Infill drilling and hydraulic fracture stimulation in these reservoirs are important reservoir management strategies to increase production and reserves. Phase II of this DOE/cooperative industry project focused on optimization of infill drilling and evaluation of hydraulic fracturing in naturally-fractured tight-gas reservoirs. The cooperative project involved multidisciplinary reservoir characterization and simulation studies to determine infill well potential in the Mesaverde and Dakota sandstone formations at selected areas in the San Juan Basin of northwestern New Mexico. This work used the methodology and approach developed in Phase I. Integrated reservoir description and hydraulic fracture treatment analyses were also conducted in the Pecos Slope Abo tight-gas reservoir in southeastern New Mexico and the Lewis Shale in the San Juan Basin. This study has demonstrated a methodology to (1) describe reservoir heterogeneities and natural fracture systems, (2) determine reservoir permeability and permeability anisotropy, (3) define the elliptical drainage area and recoverable gas for existing wells, (4) determine the optimal location and number of new in-fill wells to maximize economic recovery, (5) forecast the increase in total cumulative gas production from infill drilling, and (6) evaluate hydraulic fracture simulation treatments and their impact on well drainage area and infill well potential. Industry partners during the course of this five-year project included BP, Burlington Resources, ConocoPhillips, and Williams.

  3. A concept for using solar energy in a coal gasification process

    SciTech Connect (OSTI)

    Gupta, V.K. )

    1991-01-01

    A fluidized bed system called CO{sub 2} acceptor process to convert lignite or sub-bituminous coal into synthetic gas or pipeline gas has been developed by Conoco Coal Development Company under contract with Department of Energy at a pilot plant stage of 40 tons per day. The background of the process and its advantages over the Lurgi coal gasification process have been discussed. In this paper the potential methods on how solar energy can be stored in lime and recovered at night time have been presented. The possible strategies on how solar energy can be utilized in the CO{sub 2} acceptor process to gasify the coal have also been suggested. The preliminary analysis indicates that the product gas contains 50% more energy per kilogram of coal as compared to the standard CO{sub 2} acceptor process, and the gasification can be carried out during night time using the solar energy stored in a solid material. Some of the advantages of CO{sub 2} acceptor process using solar energy as compared to solar coal gasification have also been pointed out.

  4. Phase I: the pipeline-gas demonstration plant. Demonstration plant engineering and design. Volume 17. Plant section 2500 - Plant and Instrument Air

    SciTech Connect (OSTI)

    1981-05-01

    Contract No. EF-77-C-01-2542 between Conoco Inc. and the US Department of Energy provides for the design, construction, and operation of a demonstration plant capable of processing bituminous caking coals into clean pipeline quality gas. The project is currently in the design phase (Phase I). This phase is scheduled to be completed in June 1981. One of the major efforts of Phase I is the process and project engineering design of the Demonstration Plant. The design has been completed and is being reported in 24 volumes. This is Volume 17 which reports the design of Plant Section 2500 - Plant and Instrument Air. The plant and instrument air system is designed to provide dry, compressed air for a multitude of uses in plant operations and maintenance. A single centrifugal air compressor provides the total plant and instrument air requirements. An air drying system reduces the dew point of the plant and instrument air. Plant Section 2500 is designed to provide air at 100/sup 0/F and 100 psig. Both plant and instrument air are dried to a -40/sup 0/F dew point. Normal plant and instrument air requirements total 1430 standard cubic feet per minute.

  5. Status of coal liquefaction in the United States and related research and development at the Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Salmon, R.; Cochran, H.D. Jr.; McNeese, L.E.

    1982-10-05

    We divide coal liquefaction processes into four categories: (1) indirect liquefaction, such as Fischer-Tropsch and methanol synthesis, in which coal is fist gasified to produce a synthesis gas which is then recombined to produce liquids; (2) direct liquefaction processes, typified by H-Coal, Exxon Donor Solvent (EDS), and SRC-I and II, in which a slurry of coal and solvent is subjected to high severity liquefaction conditions, either with or without added catalyst; (3) two-stage liquefaction, such as Conoco's CSF process, in which an initial dissolution at mild conditions is followed by a more severe catalytic hydrogenation-hydrocracking step; or the short contact time two-stage liquefaction processes being developed currently by groups which include Chevron, Electric Power Research Institute (EPRI), Department of Energy/Fossil Energy (DOE/FE); and (4) pyrolysis and hydropyrolysis processes, such as COED and Cities Service-Rockewell, in which coal is carbonized to produce liquids, gases, and char. Pilot plant experience with the various processes is reviewed (including equipment problems, corrosion and abrasion, refractory life, heat recovery, coke deposits, reactor kinetics, scale-up problems, health hazards, environmental impacts, upgrading products, economics, etc.). Commercialization possibilities are discussed somewhat pessimistically in the light of reduction of US Oil imports, weakening oil prices, conversion to coal, smaller automobiles, economics and finally, some uncertainty about SFC goals and policies. (LTN)

  6. Development of SRC-I product analysis. Volume 3. Documentation of procedures

    SciTech Connect (OSTI)

    Schweighardt, F.K.; Kingsley, I.S.; Cooper, F.E.; Kamzelski, A.Z.; Parees, D.M.

    1983-09-01

    This section documents the BASIC computer program written to simulate Wilsonville's GC-simulated distillation (GCSD) results at APCI-CRSD Trexlertown. The GC conditions used at APCI for the Wilsonville GCSD analysis of coal-derived liquid samples were described in the SRC-I Quarterly Technical Report, April-June 1981. The approach used to simulate the Wilsonville GCSD results is also from an SRC-I Quarterly Technical Report and is reproduced in Appendix VII-A. The BASIC computer program is described in the attached Appendix VII-B. Analysis of gases produced during coal liquefaction generates key information needed to determine product yields for material balance and process control. Gas samples from the coal process development unit (CPDU) and tubing bombs are the primary samples analyzed. A Carle gas chromatographic system was used to analyze coal liquefaction gas samples. A BASIC computer program was written to calculate the gas chromatographic peak area results into mole percent results. ICRC has employed several analytical workup procedures to determine the amount of distillate, oils, asphaltenes, preasphaltenes, and residue in SRC-I process streams. The ASE procedure was developed using Conoco's liquid column fractionation (LC/F) method as a model. In developing the ASE procedure, ICRC was able to eliminate distillation, and therefore quantify the oils fraction in one extraction step. ASE results were shown to be reproducible within +- 2 wt %, and to yield acceptable material balances. Finally, the ASE method proved to be the least affected by sample composition.

  7. Cranfield Thermosiphon test DTS data

    SciTech Connect (OSTI)

    Barry Freifeld

    2015-01-19

    Thermal profile data acquired using Silixa Ultima Distributed Temperature Sensor (DTS) at Cranfield, MS field test

  8. EA-0513: Final Environmental Assessment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Approaches for Acquiring Energy Savings in Commercial Sector Buildings, Bonneville Power Administration

  9. Pull strength evaluation of Sn-Pb solder joints made to Au-Pt-Pd and Au thick film structures on low-temperature co-fired ceramic -final report for the MC4652 crypto-coded switch (W80).

    SciTech Connect (OSTI)

    Uribe, Fernando; Vianco, Paul Thomas; Zender, Gary L.

    2006-06-01

    A study was performed that examined the microstructure and mechanical properties of 63Sn-37Pb (wt.%, Sn-Pb) solder joints made to thick film layers on low-temperature co-fired (LTCC) substrates. The thick film layers were combinations of the Dupont{trademark} 4596 (Au-Pt-Pd) conductor and Dupont{trademark} 5742 (Au) conductor, the latter having been deposited between the 4596 layer and LTCC substrate. Single (1x) and triple (3x) thicknesses of the 4596 layer were evaluated. Three footprint sizes were evaluated of the 5742 thick film. The solder joints exhibited excellent solderability of both the copper (Cu) lead and thick film surface. In all test sample configurations, the 5742 thick film prevented side wall cracking of the vias. The pull strengths were in the range of 3.4-4.0 lbs, which were only slightly lower than historical values for alumina (Al{sub 2}O{sub 3}) substrates. General (qualitative) observations: (a) The pull strength was maximized when the total number of thick film layers was between two and three. Fewer that two layers did not develop as strong of a bond at the thick film/LTCC interface; more than three layers and of increased footprint area, developed higher residual stresses at the thick film/LTCC interface and in the underlying LTCC material that weakened the joint. (b) Minimizing the area of the weaker 4596/LTCC interface (e.g., larger 5742 area) improved pull strength. Specific observations: (a) In the presence of vias and the need for the 3x 4596 thick film, the preferred 4596:5742 ratio was 1.0:0.5. (b) For those LTCC components that require the 3x 4596 layer, but do not have vias, it is preferred to refrain from using the 5742 layer. (c) In the absence of vias, the highest strength was realized with a 1x thick 5742 layer, a 1x thick 4596 layer, and a footprint ratio of 1.0:1.0.

  10. Development of a hydraulic borehole seismic source

    SciTech Connect (OSTI)

    Cutler, R.P.

    1998-04-01

    This report describes a 5 year, $10 million Sandia/Industry project to develop an advanced borehole seismic source for use in oil and gas exploration and production. The development Team included Sandia, Chevron, Amoco, Conoco, Exxon, Raytheon, Pelton, and GRI. The seismic source that was developed is a vertically oriented, axial point force, swept frequency, clamped, reaction-mass vibrator design. It was based on an early Chevron prototype, but the new tool incorporates a number of improvements which make it far superior to the original prototype. The system consists of surface control electronics, a special heavy duty fiber optic wireline and draw works, a cablehead, hydraulic motor/pump module, electronics module, clamp, and axial vibrator module. The tool has a peak output of 7,000 lbs force and a useful frequency range of 5 to 800 Hz. It can operate in fluid filled wells with 5.5-inch or larger casing to depths of 20,000 ft and operating temperatures of 170 C. The tool includes fiber optic telemetry, force and phase control, provisions to add seismic receiver arrays below the source for single well imaging, and provisions for adding other vibrator modules to the tool in the future. The project yielded four important deliverables: a complete advanced borehole seismic source system with all associated field equipment; field demonstration surveys funded by industry showing the utility of the system; industrial sources for all of the hardware; and a new service company set up by their industrial partner to provide commercial surveys.

  11. Petroleum refining industry of developed capitalist countries in the 1990s

    SciTech Connect (OSTI)

    Prokhorova, A.A.

    1994-07-01

    Crude oil is the principal source of energy today and in the immediate future. The increases in the consumption of crude oil (1.7% per year up to 2005) will be offset mainly by additional supplies from the countries of the Near East. Data on the imports of oil by the developed capitalists countries are presented in Table 2. In the United States, according to a projection made by Conoco, by the year 2000 the volume of imports will be twice the volume of domestic production; according to another prediction, the amount of Near East crude will increase from 34% in 1990 to 42% in 2000. Since the mid-1980s, the energy policy of the USA has been based on importing so-called cheap crude. Laws have been passed to mandate not only energy saving, but also cuts in the oil and gas production on U.S. territory. The volume of U.S. oil production will be 20% lower in 2000 than in 1990. Some 90% of the worldwide demand for oil is met by light and medium-density crudes, but such crudes account for only 25% of the oil resources. Projections indicate that the oil supplied to refiners in the future will be heavier and will have higher sulfur contents. The U.S. production of low-sulfur crude will drop off sharply in the next 10-15 years. The drop in oil production of the CIS [former USSR] and the consequent drop in exports from these countries will have a destabilizing effect on the world market. The average price of the {open_quotes}market basket{close_quotes} of OPEC crudes in 1991 was $149/ton (in 1990 $178/ton), in comparison with a 1992 price of $148/ton. This report presents data on refining process capacities and the ratio of secondary capacity to primary distillation capacity.

  12. STL, a new approach to field development

    SciTech Connect (OSTI)

    Smedal, A.; Syvertsen, K.

    1995-12-31

    Submerged Turret and Loading (STL) is an efficient and safe system for offshore loading and storage. The loading system can effectively be adapted to specific field requirements and operational conditions. The STL is designed to meet the requirements for versatile and flexible field development, allowing loading operations to take place all year round in the harshest environments. The STL concept has been selected for field development projects with different operational requirements i.e. (1) Direct Shuttle Loading (DSL) which permits loading of processed crude oil directly into shuttle tankers without the requirement for oil storage at the field. A Direct Shuttle Loading system is installed at the Heidrun Field (Conoco). (2) STL as a Floating Storage Unit (FSU) application has been selected for the Fulmar Field (Shell/Esso) and the Yme Field (Statoil). Both FSU`s are converted standard tankers (Aframax and Suezmax) and designed for operation in extreme North Sea environments. (3) An STL buoy can be arranged as an effective offshore loading terminal. BP have selected STL for the Harding Field. The STL loading terminal will be used for export from a subsea field storage. (4) Based on the STL technology Statoil have launched a new design, Multipurpose Shuttle Tanker (MST). This unit will be equipped with the STL ship systems allowing it to operate as an STL tanker for direct shuttle loading, as an STL loading terminal or as a storage unit. In addition the vessel is equipped for operation as a standard North Sea shuttle tanker capable of loading from floating storage units and standard North Sea loading terminals via a loading hose in the conventional manner. (5) The production concept, developed from STL technology can effectively be used for conversion of standard tankers to FPSO or for new-built FPSOs.

  13. New technology concept for two-stage liquefaction of coal. Final summary report, 1 July 1983-30 September 1985

    SciTech Connect (OSTI)

    Comolli, A.G.; Duddy, J.E.; Koziel, M.L.; MacArthur, J.B.; McLean, J.B.; Smith, T.O.

    1986-02-01

    Hydrocarbon Research, Inc. (HRI) has completed a series of studies for the evaluation of a ''New Technology Concept for Two-Stage Liquefaction of Coal''. The time period of studies covered May 26, 1983 to November 25, 1985, a total of thirty months, with the major effort devoted to Illinois No. 6 bituminous coal and the balance devoted to Wyodak sub-bituminous coal. A two-stage coal liquefaction process, based on two close-coupled catalytic ebullated-bed reactors with the first stage operating at low temperature for maximum hydrogenation, has been developed and demonstrated on Illinois No. 6 and Wyodak coals. This final report presents an executive summary of the program and completes the reporting requirements of Contract No. DE-AC22-83PC60017. A summary of the studies and process demonstrations is presented along with references to the Topical Reports on Illinois No. 6 coal, Wyodak coal, Conceptual Commercial Plant Design and Economics and reports by DOE sponsored support contractors. Experimental details are contained in the referenced reports. The accomplishments of this program and recommendations for a follow-on program are presented. By application of this new hydrogenation concept in this study, distillate yields of greater than 65 W % of M.A.F. Coal or 4.2 barrels per ton of M.A.F. coal were demonstrated on both Illinois No. 6 and Wyodak coals. This was accompanied by a ten-fold reduction in bottoms viscosity and the production of low sulfur environmentally clean fuels. As reported by Conoco, Inc. and Battelle Pacific Northwest Laboratories, a higher level of hydrogenation is evident and the liquids produced are more petroleum-like than coal liquids derived from other liquefaction processes. Upgrading studies on the Wyodak products are being performed by Chevron. 7 figs., 14 tabs.

  14. Technical analysis of advanced wastewater-treatment systems for coal-gasification plants

    SciTech Connect (OSTI)

    Not Available

    1981-03-31

    This analysis of advanced wastewater treatment systems for coal gasification plants highlights the three coal gasification demonstration plants proposed by the US Department of Energy: The Memphis Light, Gas and Water Division Industrial Fuel Gas Demonstration Plant, the Illinois Coal Gasification Group Pipeline Gas Demonstration Plant, and the CONOCO Pipeline Gas Demonstration Plant. Technical risks exist for coal gasification wastewater treatment systems, in general, and for the three DOE demonstration plants (as designed), in particular, because of key data gaps. The quantities and compositions of coal gasification wastewaters are not well known; the treatability of coal gasification wastewaters by various technologies has not been adequately studied; the dynamic interactions of sequential wastewater treatment processes and upstream wastewater sources has not been tested at demonstration scale. This report identifies key data gaps and recommends that demonstration-size and commercial-size plants be used for coal gasification wastewater treatment data base development. While certain advanced treatment technologies can benefit from additional bench-scale studies, bench-scale and pilot plant scale operations are not representative of commercial-size facility operation. It is recommended that coal gasification demonstration plants, and other commercial-size facilities that generate similar wastewaters, be used to test advanced wastewater treatment technologies during operation by using sidestreams or collected wastewater samples in addition to the plant's own primary treatment system. Advanced wastewater treatment processes are needed to degrade refractory organics and to concentrate and remove dissolved solids to allow for wastewater reuse. Further study of reverse osmosis, evaporation, electrodialysis, ozonation, activated carbon, and ultrafiltration should take place at bench-scale.

  15. Environmental compliance tracking for the oil and gas industry

    SciTech Connect (OSTI)

    Thompson, C.C.; Qasem, J.; Killian, T.L.

    1998-12-31

    To meet the demand to track regulatory compliance requirements for oil and gas facilities, C-K Associates, Inc. and Conoco Inc. Natural Gas and Gas Products Department developed a customized relational database. The Compliance Tracking System (CTS), a Microsoft Access database, is designed to insure compliance with all applicable federally-enforceable air quality standards. Currently, compliance is insured through work practices, operating procedures, maintenance, and testing; however, associated documentation may be less formalized, especially for work practice standards and unmanned operations. Title V Operating Permits required by the 1990 Clean Air Act Amendments created the specific need for documentation of such compliance. Title V programs require annual compliance certification and semi-annual reports of compliance monitoring with signature by a responsible official. The CTS compiles applicable standards as well as monitoring, recordkeeping, and reporting requirements. A responsible party (primary and secondary) for each compliance action is assigned. Multiple tickler functions within the system provide notice of upcoming or past-due compliance actions. Systems flexibility is demonstrated through various sort mechanisms. Compliance items can be managed and documented through work orders generated by the CTS. This paper will present how the CTS was developed as an environmental management system and populated for a natural gas plant operating under a Title V permit. The system was expanded to include water quality, waste, and emergency reporting requirements to become a multi-discipline environmental compliance tool for the facility. Regulatory requirements were re-formatted to action items pertinent to field operations. The compliance actions were assigned to fit within current procedures whenever possible. Examples are presented for each media with emphasis on federally-enforceable Title V requirements.

  16. GEO-ENGINEERING MODELING THROUGH INTERNET INFORMATICS (GEMINI)

    SciTech Connect (OSTI)

    W. Lynn Watney; John H. Doveton

    2004-05-13

    GEMINI (Geo-Engineering Modeling through Internet Informatics) is a public-domain web application focused on analysis and modeling of petroleum reservoirs and plays (http://www.kgs.ukans.edu/Gemini/index.html). GEMINI creates a virtual project by ''on-the-fly'' assembly and analysis of on-line data either from the Kansas Geological Survey or uploaded from the user. GEMINI's suite of geological and engineering web applications for reservoir analysis include: (1) petrofacies-based core and log modeling using an interactive relational rock catalog and log analysis modules; (2) a well profile module; (3) interactive cross sections to display ''marked'' wireline logs; (4) deterministic gridding and mapping of petrophysical data; (5) calculation and mapping of layer volumetrics; (6) material balance calculations; (7) PVT calculator; (8) DST analyst, (9) automated hydrocarbon association navigator (KHAN) for database mining, and (10) tutorial and help functions. The Kansas Hydrocarbon Association Navigator (KHAN) utilizes petrophysical databases to estimate hydrocarbon pay or other constituent at a play- or field-scale. Databases analyzed and displayed include digital logs, core analysis and photos, DST, and production data. GEMINI accommodates distant collaborations using secure password protection and authorized access. Assembled data, analyses, charts, and maps can readily be moved to other applications. GEMINI's target audience includes small independents and consultants seeking to find, quantitatively characterize, and develop subtle and bypassed pays by leveraging the growing base of digital data resources. Participating companies involved in the testing and evaluation of GEMINI included Anadarko, BP, Conoco-Phillips, Lario, Mull, Murfin, and Pioneer Resources.

  17. Comparison of Preanode and Postanode Carbon Dioxide Separation for IGFC Systems

    SciTech Connect (OSTI)

    Eric Liese

    2010-01-01

    This paper examines the arrangement of a solid oxide fuel cell (SOFC) within a coal gasification cycle, this combination generally being called an integrated gasification fuel cell cycle. This work relies on a previous study performed by the National Energy Technology Laboratory (NETL) that details thermodynamic simulations of integrated gasification combined cycle (IGCC) systems and considers various gasifier types and includes cases for 90% CO2 capture (2007, Cost and Performance Baseline for Fossil Energy Plants, Vol. 1: Bituminous Coal and Natural Gas to Electricity, National Energy Technology Laboratory Report No. DOE/NETL-2007/1281). All systems in this study assume a Conoco Philips gasifier and cold-gas clean up conditions for the coal gasification system (Cases 3 and 4 in the NETL IGCC report). Four system arrangements, cases, are examined. Cases 1 and 2 remove the CO2 after the SOFC anode. Case 3 assumes steam addition, a water-gas-shift (WGS) catalyst, and a Selexol process to remove the CO2 in the gas cleanup section, sending a hydrogen-rich gas to the fuel cell anode. Case 4 assumes Selexol in the cold-gas cleanup section as in Case 3; however, there is no steam addition, and the WGS takes places in the SOFC and after the anode. Results demonstrate significant efficiency advantages compared with IGCC with CO2 capture. The hydrogen-rich case (Case 3) has better net electric efficiency compared with typical postanode CO2 capture cases (Cases 1 and 2), with a simpler arrangement but at a lower SOFC power density, or a lower efficiency at the same power density. Case 4 gives an efficiency similar to Case 3 but also at a lower SOFC power density. Carbon deposition concerns are also discussed

  18. Mesozoic stratigraphy and paleoenvironments of the Exxon 975-1 well, Georges Bank Basin, U. S. North Atlantic outer continental shelf

    SciTech Connect (OSTI)

    Poppe, L.J.; Poag, C.W. . Quissett Labs.)

    1993-03-01

    The Exxon 975--1 well, located in the southeastern part of the Georges Bank Basin, was drilled to a total depth of 4,452 m relative to the Kelly Bushing. The oldest sediments penetrated by the well are Middle Jurassic (Bajocian-Early Bathonian), but unambiguous seismic correlations with the COST G--1 and G--2 wells show that about 6,860 m of Mesozoic and Cenozoic sedimentary rocks rest on the Paleozoic basement at the 975--1 wellsite. The Jurassic/Cretaceous boundary in the well is placed at 1,673 m; the Cretaceous/Tertiary boundary occurs at 384 m. Limestone is predominant below 3,966 m (Iroquois Formation), and at the intervals 3,810--3,246 m and 1,897--1,654 m (lower and upper tongues of the Abenaki Formation). Siliciclastics of the Mohican, undivided Mic Mac-Mohawk, Missisauga, Logan Canyon, and Dawson Canyon Formations dominate the remainder of the Mesozoic section. The Exxon 975--1 well penetrated updip, more terrestrial lithofacies than the COST G--2, Conoco 145--1, and Mobil 312--1 wells. Salt, anhydrite, dolomite, and the micritic textures of the carbonates in the Iroquois Formation of the Exxon 975--1 well suggest hypersaline restricted marine and supratidal depositional environments. The predominantly nonmarine deltaic siliciclastics of the Mohican, Misaine Shale, and Mic Mac-Mohawk units are thicker in the Exxon 975--1 well, whereas marine carbonates of the Scatarie and Bacarro Limestones are usually thinner than at the downdip (seaward) wellsites. Similarly, the Early Cretaceous Missisauga and Logan Canyon Formations represent lower delta plain (alluvial and swamp) and delta front (beach, bar, and lagoon) facies at the Exxon 975--1 wellsite, whereas correlative downdip facies represent shallow marine to delta front deposition.

  19. Regional geology of Georges Bank basin - OCS Sale 42 drilling results

    SciTech Connect (OSTI)

    High, L.R. Jr.

    1985-02-01

    Industry bid aggressively in OCS Sale 42, spending $816 million. Eight wildcats were drilled in 1981-82 to test 5 major plays. All wells were dry; no potential reservoir or source rocks were found. The tectonic-stratigraphic framework of the Georges Bank basin is that of an Atlantic-type plate margin. Two major unconformities divide the section into prerift, synrift, and postrift sequences. The prerift sequence consists of Paleozoic metasediments in basement fault blocks. Synrift sediments consist of Newark Group equivalents: the Argo Salt and the Iroquoi Formation. The postrift sequence consists of Mohican red beds overlain by progradational wedges, with the carbonate Abenaki Formation at the base. The objective in 4 of the 8 wildcats was the Iroquois Formation. Mobil 312-1 and Shell 357-1 were drilled into a seismic anomaly interpreted to be a reef. This structure was found to be a complex carbonate mound. Exxon 975-1 was drilled on a seismic amplitude anomaly variously interpreted to be the result of salt, coal, or porous carbonates. This anomaly proved to be caused by a salt bed. The objective in Shell 410-1R was carbonate banks over a basement horst block. No significant zones of porosity were found. The remaining 4 wildcats were drilled on Abenaki prospects. Mobil 273-1, Tenneco 187-1d, and Conoco 145-1 were drilled for possible carbonate banks over a salt structure. Only thin oolitic grainstone intervals were found. Exxon 133-1 was based on a seismic anomaly interpreted to be a patch reef. This feature was found to be a volcanic cone.

  20. Intrinsic in situ anaerobic biodegradation of chlorinated solvents at an industrial landfill

    SciTech Connect (OSTI)

    Lee, M.D.; Mazierski, P.F.; Buchanan, R.J. Jr.; Ellis, D.E.; Sehayek, L.S.

    1995-12-31

    The DuPont Necco Park Landfill in Niagara Falls, New York, is contaminated with numerous chlorinated solvents at concentrations of up to hundreds of mg/L in the groundwater. An extensive monitoring program was conducted to determine if intrinsic anaerobic biodegradation was occurring at the site, to determine what might limit this activity, and to characterize this activity with depth and distance away from the landfill. It was determined that anaerobic microbial activity was occurring in all zones, based upon the presence of intermediate products of the breakdown of the chlorinated solvents and the presence of final metabolic end products such as ethene and ethane. Aerobic, iron-reducing, manganese-reducing, sulfate-reducing, and methanogenic redox conditions were identified at the site. High levels of nitrogen and biodegradable organic compounds were present in most areas to support cometabolic anaerobic microbial activity against the chlorinated solvents. Intrinsic biodegradation is clearly evident and is effective in reducing the concentrations of chlorinated organic in the groundwater at the site. Groundwater modeling efforts during development of a site conceptual model indicated that microbial degradation was necessary to account for the downgradient reduction of chlorinated volatile organic compounds as compared to chloride, a conservative indicator parameter.

  1. Organic Light-Emitting Devices (OLEDS) and Their Optically Detected Magnetic Resonance (ODMR)

    SciTech Connect (OSTI)

    Gang Li

    2003-12-12

    Organic Light-Emitting Devices (OLEDs), both small molecular and polymeric have been studied extensively since the first efficient small molecule OLED was reported by Tang and VanSlyke in 1987. Burroughes' report on conjugated polymer-based OLEDs led to another track in OLED development. These developments have resulted in full color, highly efficient (up to {approx} 20% external efficiency 60 lm/W power efficiency for green emitters), and highly bright (> 140,000 Cd/m{sup 2} DC, {approx}2,000,000 Cd/m{sup 2} AC), stable (>40,000 hr at 5 mA/cm{sup 2}) devices. OLEDs are Lambertian emitters, which intrinsically eliminates the view angle problem of liquid crystal displays (LCDs). Thus OLEDs are beginning to compete with the current dominant LCDs in information display. Numerous companies are now active in this field, including large companies such as Pioneer, Toyota, Estman Kodak, Philipps, DuPont, Samsung, Sony, Toshiba, and Osram, and small companies like Cambridge Display Technology (CDT), Universal Display Corporation (UDC), and eMagin. The first small molecular display for vehicular stereos was introduced in 1998, and polymer OLED displays have begun to appear in commercial products. Although displays are the major application for OLEDs at present, they are also candidates for nest generation solid-state lighting. In this case the light source needs to be white in most cases. Organic transistors, organic solar cells, etc. are also being developed vigorously.

  2. National Spill Test Technology Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Sheesley, David [Western Research Institute

    Western Research Institute established, and ACRC continues to maintain, the National Spill Technology database to provide support to the Liquified Gaseous Fuels Spill Test Facility (now called the National HAZMAT Spill Center) as directed by Congress in Section 118(n) of the Superfund Amendments and Reauthorization Act of 1986 (SARA). The Albany County Research Corporation (ACRC) was established to make publicly funded data developed from research projects available to benefit public safety. The founders since 1987 have been investigating the behavior of toxic chemicals that are deliberately or accidentally spilled, educating emergency response organizations, and maintaining funding to conduct the research at the DOEÆs HAZMAT Spill Center (HSC) located on the Nevada Test Site. ACRC also supports DOE in collaborative research and development efforts mandated by Congress in the Clean Air Act Amendments. The data files are results of spill tests conducted at various times by the Silicones Environmental Health and Safety Council (SEHSC) and DOE, ANSUL, Dow Chemical, the Center for Chemical Process Safety (CCPS) and DOE, Lawrence Livermore National Laboratory (LLNL), OSHA, and DOT; DuPont, and the Western Research Institute (WRI), Desert Research Institute (DRI), and EPA. Each test data page contains one executable file for each test in the test series as well as a file named DOC.EXE that contains information documenting the test series. These executable files are actually self-extracting zip files that, when executed, create one or more comma separated value (CSV) text files containing the actual test data or other test information.

  3. Effect of Front-Side Silver Metallization on Underlying n+-p Junction in Multicrystalline Silicon Solar Cells: Preprint

    SciTech Connect (OSTI)

    Jiang, C. S.; Li, Z. G.; Moutinho, H. R.; Liang, L.; Ionkin, A.; Al-Jassim, M. M.

    2012-06-01

    We report on the effect of front-side Ag metallization on the underlying n+-p junction of multicrystalline Si solar cells. The junction quality beneath the contacts was investigated by characterizing the uniformities of the electrostatic potential and doping concentration across the junction, using scanning Kelvin probe force microscopy and scanning capacitance microscopy. We investigated cells with a commercial Ag paste (DuPont PV159) and fired at furnace setting temperatures of 800 degrees, 840 degrees, and 930 degrees C, which results in actual cell temperatures ~100 degrees C lower than the setting temperature and the three cells being under-, optimal-, and over-fired. We found that the uniformity of the junction beneath the Ag contact was significantly degraded by the over-firing, whereas the junction retained good uniformity with the optimal- and under-fire temperatures. Further, Ag crystallites with widely distributed sizes from <100 nm to several μm were found at the Ag/Si interface of the over-fired cell. Large crystallites were imaged as protrusions into Si deeper than the junction depth. However, the junction was not broken down; instead, it was reformed on the entire front of the crystallite/Si interface. We propose a mechanism of the junction-quality degradation, based on emitter Si melting at the temperature around the Ag-Si eutectic point during firing, and subsequent recrystallization with incorporation of impurities in the Ag paste and with formation of crystallographic defects during quenching.

  4. Macroalgae Butanol

    SciTech Connect (OSTI)

    2010-02-01

    Broad Funding Opportunity Announcement Project: E. I. du Pont de Nemours & Company (DuPont) and Bio Architecture Lab, Inc. (BAL) are exploring the commercial viability of producing fuel-grade isobutanol from macroalgae (seaweed). Making macroalgae an attractive substrate for biofuel applications however, will require continued technology development. Assuming these developments are successful, initial assessments suggest macroalgae aquafarming in our oceans has the potential to produce a feedstock with cost in the same range as terrestrial-based substrates (crop residuals, energy crops) and may be the feedstock of choice in some locations. The use of macroalgae also diversifies the sources of U.S. biomass in order to provide more options in meeting demand for biofuels. The process being developed will use a robust industrial biocatalyst (microorganism) capable of converting macroalgal-derived sugars directly into isobutanol. Biobutanol is an advanced biofuel with significant advantages over ethanol, including higher energy content, lower greenhouse gas emissions, and the ability to be blended in gasoline at higher levels than ethanol without changes to existing automobiles or the fuel industry infrastructure. Butamax™ is currently commercializing DuPont’s biobutanol fermentation technology that uses sugar and starch feedstocks.

  5. Response of a uniformly accelerated detector to massless Rarita–Schwinger fields in vacuum

    SciTech Connect (OSTI)

    Li, Qinglin; Yu, Hongwei; Zhou, Wenting

    2014-09-15

    We study the response of a uniformly accelerated detector modeled by a two-level atom nonlinearly coupled to vacuum massless Rarita–Schwinger fields. We first generalize the formalism developed by Dalibard, Dupont-Roc, and Cohen-Tannoudji in the linear coupling case, and we then calculate the mean rate of change of the atomic energy of the accelerated atom. Our result shows that a uniformly accelerated atom in its ground state interacting with vacuum Rarita–Schwinger field fluctuations would spontaneously transition to an excited state and the unique feature in contrast to the case of the atom coupled to the scalar, electromagnetic and Dirac fields is the appearance of terms in the excitation rate which are proportional to the sixth and eighth powers of acceleration. - Highlights: • We study the response of an accelerated detector to Rarita–Schwinger fields. • Detector spontaneously transitions to an excited state in vacuum. • Excitation rate contains terms of the sixth and eighth powers of acceleration.

  6. Investigating Commercial Cellulase Performances Toward Specific Biomass Recalcitrance Factors Using Reference Substrates

    SciTech Connect (OSTI)

    Ju, Xiaohui; Bowden, Mark E.; Engelhard, Mark H.; Zhang, Xiao

    2014-04-01

    Three commercial cellulase preparations, Novozymes Cellic® Ctec2, Dupont Accellerase® 1500, and DSM Cytolase CL, were evaluated for their hydrolytic activity using a set of reference biomass substrates with controlled substrate characteristics. It was found that lignin remains a significant recalcitrance factor to all the preparations, although different enzyme preparations respond to the inhibitory effect of lignin differently. Also, different types of biomass lignin can inhibit cellulose enzymes in different manners. Enhancing enzyme activity toward biomass fiber swelling is an area significantly contributing to potential improvement in cellulose performance. While the degree of polymerization of cellulose in the reference substrates did not present a major recalcitrance factor to Novozymes Cellic® Ctec2, cellulose crystallite has been shown to have a significant lower reactivity toward all enzyme mixtures. The presence of polysaccharide monooxygenases (PMOs) in Novozymes Ctec2 appears to enhance enzyme activity toward decrystallization of cellulose. This study demonstrated that reference substrates with controlled chemical and physical characteristics of structural features can be applied as an effective and practical strategy to identify cellulosic enzyme activities toward specific biomass recalcitrance factor(s) and provide specific targets for enzyme improvement.

  7. The Rio Tinto Mine: A volunteer clean-up success story

    SciTech Connect (OSTI)

    Schwaegler, D.P.; Corser, P.G.; Aho, G.D.

    1999-07-01

    Underground copper mining at the Rio Tinto mine in northern Nevada commenced in 1932 and continued intermittently for approximately forty years. Since 1975 the site has been essentially inactive. Mine operations included placement of tailings generated from ore processing in the Mill Creek drainage. In 1993, due to concerns about environmental damage to surrounding surface waters, four of the previous owners and operators of the site jointly formed the Rio Tinto Working Group (RTWG) to remediate the site in cooperation with the State of Nevada, Department of Conservation and Natural Resource and the Division of Environmental Protection (NDEP). The Rio Tinto Working Group consists of the Atlantic Richfield Company, Cleveland Cliffs Iron Company, E.I. DuPont de Nemours and Company, and Cominco American Inc., The regulatory and technical approach taken by the RTWG to achieve their objective of proactively implementing remedial measures at the site, rather than following the CERCLA process, are discussed. The steps included preparing an 18-element remedial program to be completed at the site and negotiating an Administrative Order on Consent (AOC) with the State of Nevada, which included a deferral from EPA for listing of the site on the NPL list. By entering into a cooperative relationship with the NDEP and avoiding the CERCLA process, the Rio Tinto Working Group was able to fast track site investigation and remedial designs, leading to a timely start up of remedial construction activities.

  8. Effects of preoxidation on the swelling and softening of bituminous coals

    SciTech Connect (OSTI)

    Maloney, D. J.; Jenkins, R. G.; Walker, Jr., P. L.

    1980-04-01

    A study was conducted to evaluate the applicability of a DuPont 942-TMA (Thermomechanical Analyzer) dilatometer system for the characterization of the swelling and softening properties of caking coals. The results of this investigation demonstrate the utility of this dilatometer system. Several parameters clearly defined with this unit are characteristic of the plastic transitions occurring upon carbonization. These include softening, dilation and resolidification temperature and volume contraction, expansion and total dilation values. The transition parameters measured with the 942-TMA unit are influenced significantly by coal particle size, dilatometer load, and heating rate. All transition temperatures exhibit marked increases with increasing heating rate. Softening temperatures decrease with increasing load and particle size. Dilation temperatures are essentially independent of dilatometer load effects and resolidification temperatures are independent of load and particle size over the range of conditions used in this study. Volume contraction and expansion values show an increase with decreasing coal particle size. Volume expansion values also exhibit strong heating rate and load dependencies. The results point up the great difficulty involved in obtaining truly fresh unoxidized coal samples. Storage of fine coal particles for extended periods of time in atmospheres with even slight oxygen concentrations show signs of weathering. Exposure of an HVA coal to dry air at ambient temperature has much less effect on subsequent swelling and softening properties than does exposure to moist air.

  9. National Spill Test Technology Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Sheesley, David [Western Research Institute

    Western Research Institute established, and ACRC continues to maintain, the National Spill Technology database to provide support to the Liquified Gaseous Fuels Spill Test Facility (now called the National HAZMAT Spill Center) as directed by Congress in Section 118(n) of the Superfund Amendments and Reauthorization Act of 1986 (SARA). The Albany County Research Corporation (ACRC) was established to make publicly funded data developed from research projects available to benefit public safety. The founders since 1987 have been investigating the behavior of toxic chemicals that are deliberately or accidentally spilled, educating emergency response organizations, and maintaining funding to conduct the research at the DOEs HAZMAT Spill Center (HSC) located on the Nevada Test Site. ACRC also supports DOE in collaborative research and development efforts mandated by Congress in the Clean Air Act Amendments. The data files are results of spill tests conducted at various times by the Silicones Environmental Health and Safety Council (SEHSC) and DOE, ANSUL, Dow Chemical, the Center for Chemical Process Safety (CCPS) and DOE, Lawrence Livermore National Laboratory (LLNL), OSHA, and DOT; DuPont, and the Western Research Institute (WRI), Desert Research Institute (DRI), and EPA. Each test data page contains one executable file for each test in the test series as well as a file named DOC.EXE that contains information documenting the test series. These executable files are actually self-extracting zip files that, when executed, create one or more comma separated value (CSV) text files containing the actual test data or other test information.

  10. Pressure data from Cranfield CO2 Thermosiphon test

    SciTech Connect (OSTI)

    Barry Freifeld

    2015-01-21

    Pressure data acquired in well F2 and F3 during the CO2 geothermal thermosiphoning test, Cranfield MS.

  11. ARRA Site Characterization Projects | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are developing comprehensive data sets of formation characteristics (porosity, permeability, reservoir architecture, cap rock integrity, etc.) while also acquiring information...

  12. A life cycle cost analysis framework for geologic storage of hydrogen : a user's tool.

    SciTech Connect (OSTI)

    Kobos, Peter Holmes; Lord, Anna Snider; Borns, David James; Klise, Geoffrey T.

    2011-09-01

    The U.S. Department of Energy (DOE) has an interest in large scale hydrogen geostorage, which could offer substantial buffer capacity to meet possible disruptions in supply or changing seasonal demands. The geostorage site options being considered are salt caverns, depleted oil/gas reservoirs, aquifers and hard rock caverns. The DOE has an interest in assessing the geological, geomechanical and economic viability for these types of geologic hydrogen storage options. This study has developed an economic analysis methodology and subsequent spreadsheet analysis to address costs entailed in developing and operating an underground geologic storage facility. This year the tool was updated specifically to (1) incorporate more site-specific model input assumptions for the wells and storage site modules, (2) develop a version that matches the general format of the HDSAM model developed and maintained by Argonne National Laboratory, and (3) incorporate specific demand scenarios illustrating the model's capability. Four general types of underground storage were analyzed: salt caverns, depleted oil/gas reservoirs, aquifers, and hard rock caverns/other custom sites. Due to the substantial lessons learned from the geological storage of natural gas already employed, these options present a potentially sizable storage option. Understanding and including these various geologic storage types in the analysis physical and economic framework will help identify what geologic option would be best suited for the storage of hydrogen. It is important to note, however, that existing natural gas options may not translate to a hydrogen system where substantial engineering obstacles may be encountered. There are only three locations worldwide that currently store hydrogen underground and they are all in salt caverns. Two locations are in the U.S. (Texas), and are managed by ConocoPhillips and Praxair (Leighty, 2007). The third is in Teeside, U.K., managed by Sabic Petrochemicals (Crotogino et

  13. C1 Chemistry for the Production of Ultra-Clean Liquid Transportation Fuels and Hydrogen

    SciTech Connect (OSTI)

    Gerald P. Huffman

    2006-03-30

    Professors and graduate students from five universities--the University of Kentucky, University of Pittsburgh, University of Utah, West Virginia University, and Auburn University--are collaborating in a research program to develop C1 chemistry processes to produce ultra-clean liquid transportation fuels and hydrogen, the zero-emissions transportation fuel of the future. The feedstocks contain one carbon atom per molecular unit. They include synthesis gas (syngas), a mixture of carbon monoxide and hydrogen produced by coal gasification or reforming of natural gas, methane, methanol, carbon dioxide, and carbon monoxide. An important objective is to develop C1 technology for the production of liquid transportation fuel and hydrogen from domestically plentiful resources such as coal, coalbed methane, and hydrocarbon gases and liquids produced from coal. An Advisory Board with representatives from Chevron-Texaco, Eastman Chemical, Conoco-Phillips, the Air Force Research Laboratory, the U.S. Army National Automotive Center, and Tier Associates provides guidance on the practicality of the research. The current report summarizes the results obtained in this program during the period October 1, 2002 through March 31, 2006. The results are presented in detailed reports on 16 research projects headed by professors at each of the five CFFS Universities and an Executive Summary. Some of the highlights from these results are: (1) Small ({approx}1%) additions of acetylene or other alkynes to the Fischer-Tropsch (F-T) reaction increases its yield, causes chain initiation, and promotes oxygenate formation. (2) The addition of Mo to Fe-Cu-K/AC F-T catalysts improves catalyst lifetime and activity. (3) The use of gas phase deposition to place highly dispersed metal catalysts on silica or ceria aerogels offers promise for both the F-T and the water-gas shift WGS reactions. (4) Improved activity and selectivity are exhibited by Co F-T catalysts in supercritical hexane. (5) Binary Fe

  14. Guest Molecule Exchange Kinetics for the 2012 Ignik Sikumi Gas Hydrate Field Trial

    SciTech Connect (OSTI)

    White, Mark D.; Lee, Won Suk

    2014-05-14

    A commercially viable technology for producing methane from natural gas hydrate reservoirs remains elusive. Short-term depressurization field tests have demonstrated the potential for producing natural gas via dissociation of the clathrate structure, but the long-term performance of the depressurization technology ultimately requires a heat source to sustain the dissociation. A decade of laboratory experiments and theoretical studies have demonstrated the exchange of pure CO2 and N2-CO2 mixtures with CH4 in sI gas hydrates, yielding critical information about molecular mechanisms, recoveries, and exchange kinetics. Findings indicated the potential for producing natural gas with little to no production of water and rapid exchange kinetics, generating sufficient interest in the guest-molecule exchange technology for a field test. In 2012 the U.S. DOE/NETL, ConocoPhillips Company, and Japan Oil, Gas and Metals National Corporation jointly sponsored the first field trial of injecting a mixture of N2-CO2 into a CH4-hydrate bearing formation beneath the permafrost on the Alaska North Slope. Known as the Ignik Sikumi #1 Gas Hydrate Field Trial, this experiment involved three stages: 1) the injection of a N2-CO2 mixture into a targeted hydrate-bearing layer, 2) a 4-day pressurized soaking period, and 3) a sustained depressurization and fluid production period. Data collected during the three stages of the field trial were made available after an extensive quality check. These data included continuous temperature and pressure logs, injected and recovered fluid compositions and volumes. The Ignik Sikumi #1 data set is extensive, but contains no direct evidence of the guest-molecule exchange process. This investigation is directed at using numerical simulation to provide an interpretation of the collected data. A numerical simulator, STOMP-HYDT-KE, was recently completed that solves conservation equations for energy, water, mobile fluid guest molecules, and hydrate guest

  15. The Mesaba Energy Project: Clean Coal Power Initiative, Round 2

    SciTech Connect (OSTI)

    Stone, Richard; Gray, Gordon; Evans, Robert

    2014-07-31

    The Mesaba Energy Project is a nominal 600 MW integrated gasification combine cycle power project located in Northeastern Minnesota. It was selected to receive financial assistance pursuant to code of federal regulations (?CFR?) 10 CFR 600 through a competitive solicitation under Round 2 of the Department of Energy?s Clean Coal Power Initiative, which had two stated goals: (1) to demonstrate advanced coal-based technologies that can be commercialized at electric utility scale, and (2) to accelerate the likelihood of deploying demonstrated technologies for widespread commercial use in the electric power sector. The Project was selected in 2004 to receive a total of $36 million. The DOE portion that was equally cost shared in Budget Period 1 amounted to about $22.5 million. Budget Period 1 activities focused on the Project Definition Phase and included: project development, preliminary engineering, environmental permitting, regulatory approvals and financing to reach financial close and start of construction. The Project is based on ConocoPhillips? E-Gas? Technology and is designed to be fuel flexible with the ability to process sub-bituminous coal, a blend of sub-bituminous coal and petroleum coke and Illinois # 6 bituminous coal. Major objectives include the establishment of a reference plant design for Integrated Gasification Combined Cycle (?IGCC?) technology featuring advanced full slurry quench, multiple train gasification, integration of the air separation unit, and the demonstration of 90% operational availability and improved thermal efficiency relative to previous demonstration projects. In addition, the Project would demonstrate substantial environmental benefits, as compared with conventional technology, through dramatically lower emissions of sulfur dioxide, nitrogen oxides, volatile organic compounds, carbon monoxide, particulate matter and mercury. Major milestones achieved in support of fulfilling the above goals include obtaining Site, High Voltage

  16. Exploratory Characterization of a Perfluoropolyether Oil as a Possible Viscosity Standard at Deepwater Production Conditions of 533 K and 241 MPa

    SciTech Connect (OSTI)

    Baled, Hseen O.; Tapriyal, Deepak; Morreale, Bryan D.; Soong, Yee; Gamwo, Isaac; Krukonis, Val; Bamgbade, Babatunde A.; Wu, Yue; McHugh, Mark A.; Burgess, Ward A.; M Enick, Robert M.

    2013-10-01

    DuPonts perfluoropolyether oil Krytox GPL 102 is a promising candidate for the high-temperature, high-pressure Deepwater viscosity standard (DVS). The preferred DVS is a thermally stable liquid that exhibits a viscosity of roughly 20 mPa?s at 533 K and 241 MPa; a viscosity value representative of light oils found in ultra-deep formations beneath the deep waters of the Gulf of Mexico. A windowed rolling-ball viscometer designed by our team is used to determine the Krytox GPL 102 viscosity at pressures to 245 MPa and temperatures of 311 K, 372 K, and 533 K. At 533 K and 243 MPa, the Krytox GPL 102 viscosity is (27.21.3)mPa?s . The rolling-ball viscometer viscosity results for Krytox GPL 102 are correlated with an empirical 10-parameter surface fitting function that yields an MAPD of 3.9 %. A Couette rheometer is also used to measure the Krytox GPL 102 viscosity, yielding a value of (26.21)mPa?s at 533 K and 241 MPa. The results of this exploratory study suggest that Krytox GPL 102 is a promising candidate for the DVS, primarily because this fluoroether oil is thermally stable and exhibits a viscosity closer to the targeted value of 20 mPa ? s at 533 K and 241 MPa than any other fluid reported to date. Nonetheless, further studies must be conducted by other researcher groups using various types of viscometers and rheometers on samples of Krytox GPL 102 from the same lot to further establish the properties of Krytox GPL 102.

  17. PRECISE BLACK HOLE MASSES FROM MEGAMASER DISKS: BLACK HOLE-BULGE RELATIONS AT LOW MASS

    SciTech Connect (OSTI)

    Greene, Jenny E.; Peng, Chien Y.; Kim, Minjin; Kuo, Cheng-Yu; Braatz, James A.; Impellizzeri, C. M. Violette; Condon, James J.; Lo, K. Y.; Henkel, Christian; Reid, Mark J.

    2010-09-20

    The black hole (BH)-bulge correlations have greatly influenced the last decade of efforts to understand galaxy evolution. Current knowledge of these correlations is limited predominantly to high BH masses (M{sub BH{approx}}>10{sup 8} M{sub sun}) that can be measured using direct stellar, gas, and maser kinematics. These objects, however, do not represent the demographics of more typical L < L* galaxies. This study transcends prior limitations to probe BHs that are an order of magnitude lower in mass, using BH mass measurements derived from the dynamics of H{sub 2}O megamasers in circumnuclear disks. The masers trace the Keplerian rotation of circumnuclear molecular disks starting at radii of a few tenths of a pc from the central BH. Modeling of the rotation curves, presented by Kuo et al., yields BH masses with exquisite precision. We present stellar velocity dispersion measurements for a sample of nine megamaser disk galaxies based on long-slit observations using the B and C spectrograph on the Dupont telescope and the Dual Imaging Spectrograph on the 3.5 m telescope at Apache Point. We also perform bulge-to-disk decomposition of a subset of five of these galaxies with Sloan Digital Sky Survey imaging. The maser galaxies as a group fall below the M{sub BH}-{sigma}{sub *} relation defined by elliptical galaxies. We show, now with very precise BH mass measurements, that the low-scatter power-law relation between M{sub BH} and {sigma}{sub *} seen in elliptical galaxies is not universal. The elliptical galaxy M{sub BH}-{sigma}{sub *} relation cannot be used to derive the BH mass function at low mass or the zero point for active BH masses. The processes (perhaps BH self-regulation or minor merging) that operate at higher mass have not effectively established an M{sub BH}-{sigma}{sub *} relation in this low-mass regime.

  18. Validation of New Process Models for Large Injection-Molded Long-Fiber Thermoplastic Composite Structures

    SciTech Connect (OSTI)

    Nguyen, Ba Nghiep; Jin, Xiaoshi; Wang, Jin; Kunc, Vlastimil; Tucker III, Charles L.

    2012-02-23

    This report describes the work conducted under the CRADA Nr. PNNL/304 between Battelle PNNL and Autodesk whose objective is to validate the new process models developed under the previous CRADA for large injection-molded LFT composite structures. To this end, the ARD-RSC and fiber length attrition models implemented in the 2013 research version of Moldflow was used to simulate the injection molding of 600-mm x 600-mm x 3-mm plaques from 40% glass/polypropylene (Dow Chemical DLGF9411.00) and 40% glass/polyamide 6,6 (DuPont Zytel 75LG40HSL BK031) materials. The injection molding was performed by Injection Technologies, Inc. at Windsor, Ontario (under a subcontract by Oak Ridge National Laboratory, ORNL) using the mold offered by the Automotive Composite Consortium (ACC). Two fill speeds under the same back pressure were used to produce plaques under slow-fill and fast-fill conditions. Also, two gating options were used to achieve the following desired flow patterns: flows in edge-gated plaques and in center-gated plaques. After molding, ORNL performed measurements of fiber orientation and length distributions for process model validations. The structure of this report is as follows. After the Introduction (Section 1), Section 2 provides a summary of the ARD-RSC and fiber length attrition models. A summary of model implementations in the latest research version of Moldflow is given in Section 3. Section 4 provides the key processing conditions and parameters for molding of the ACC plaques. The validations of the ARD-RSC and fiber length attrition models are presented and discussed in Section 5. The conclusions will be drawn in Section 6.

  19. Flexible Ultra Moisture Barrier Film for Thin-Film Photovoltaic Applications

    SciTech Connect (OSTI)

    David M. Dean

    2012-10-30

    Flexible Thin-film photovoltaic (TFPV) is a low cost alternative to incumbent c-Si PV products as it requires less volume of costly semiconductor materials and it can potentially reduce installation cost. Among the TFPV options, copper indium gallium diselenide (CIGS) has the highest efficiency and is believed to be one of the most attractive candidates to achieve PV cost reduction. However, CIGS cells are very moisture sensitive and require module water vapor transmission rate (WVTR) of less than 1x10-4 gram of water per square meter per day (g-H2O/m2/day). Successful development and commercialization of flexible transparent ultra moisture barrier film is the key to enable flexible CIGS TFPV products, and thus enable ultimate PV cost reduction. At DuPont, we have demonstrated at lab scale that we can successfully make polymer-based flexible transparent ultra moisture barrier film by depositing alumina on polymer films using atomic layer deposition (ALD) technology. The layer by layer ALD approach results in uniform and amorphous structure which effectively reduces pinhole density of the inorganic coating on the polymer, and thus allow the fabrication of flexible barrier film with WVTR of 10-5 g-H2O/m2/day. Currently ALD is a time-consuming process suitable only for high-value, relatively small substrates. To successfully commercialize the ALD-on-plastic technology for the PV industry, there is the need to scale up this technology and improve throughput. The goal of this contract work was to build a prototype demonstrating that the ALD technology could be scaled-up for commercial use. Unfortunately, the prototype failed to produce an ultra-barrier film by the close of the project.

  20. Spontaneous excitation of a circularly accelerated atom coupled to electromagnetic vacuum fluctuations

    SciTech Connect (OSTI)

    Jin, Yao; Hu, Jiawei; Yu, Hongwei

    2014-05-15

    We study, using the formalism proposed by Dalibard, Dupont-Roc and Cohen-Tannoudji, the contributions of the vacuum fluctuation and radiation reaction to the rate of change of the mean atomic energy for a circularly accelerated multilevel atom coupled to vacuum electromagnetic fields in the ultrarelativistic limit. We find that the balance between vacuum fluctuation and radiation reaction is broken, which causes spontaneous excitations of accelerated ground state atoms in vacuum. Unlike for a circularly accelerated atom coupled to vacuum scalar fields, the contribution of radiation reaction is also affected by acceleration, and this term takes the same form as that of a linearly accelerated atom coupled to vacuum electromagnetic fields. For the contribution of vacuum fluctuations, we find that in contrast to the linear acceleration case, terms proportional to the Planckian factor are replaced by those proportional to a non-Planck exponential term, and this indicates that the radiation perceived by a circularly orbiting observer is no longer thermal as is in the linear acceleration case. However, for an ensemble of two-level atoms, an effective temperature can be defined in terms of the atomic transition rates, which is found to be dependent on the transition frequency of the atom. Specifically, we calculate the effective temperature as a function of the transition frequency and find that in contrast to the case of circularly accelerated atoms coupled to the scalar field, the effective temperature in the current case is always larger than the Unruh temperature. -- Highlights: •We study the spontaneous excitation of a circularly accelerated atom. •Contribution of radiation reaction to the excitation is affected by acceleration. •The radiation perceived by a circularly orbiting observer is no longer thermal. •An effective temperature can be defined in terms of atomic transition rates. •Effective temperature is larger than Unruh temperature and frequency-dependent.

  1. Evaluation of EL836 explosive stimulation of Devonian gas shale

    SciTech Connect (OSTI)

    Barbour, T G

    1980-07-01

    This report presents an evaluation of EL836, an explosive developed at E.I. duPont de Nemours and Company Laboratories, in stimulating gas shale. EL836 is a water gel type explosive with a high aluminum content. The computational evaluation of EL836 involved four one-dimensional cyclindrical geometry calculations to assess the influence of two equation-of-state descriptios of EL836, the effect or rock yielding and the effect of internal crack pressurization. Results of a computational evaluation of the EL836 explosive in stimulating Devonian gas shale suggest the following: Extensive plastic yielding will occur in a region immediate to the borehole. Extensive tensile fracture will occur in a region that begins at the outer boundary of plastic deformation and terminates at more than 100 borehole radii. Without a mechanism of ;near-wellbore fracture, such as crushing or pre-cracking during drilling or intentional borehole grooving, the plastic flow that occurs adjacent to the wellbore causes stress redistributions which prohibit early-time (less than a millisecond) tensile fracture immediate to the wellbore and thus prohibits gas penetration from the wellbore into the crack system. The barrier that the near-wellbore plastic zone presents to gas flow from the wellbore is reduced in radial dimension as time increases. Natural fractures in the wellbore wall or cataclysmic deformation and fracture adjacent to the wellbore, as a result of the explosive detonation, will likely assist in breaking down the barrier to gas flow. Very significatn enhancement is achieved in the EL836 stimulation treatment when gases penetrate the stress-wave induced radial cracks. Only minor differences were observed in the EL836 stimulation effects when comparison is made between two different explosive equations-of-state. 33 figures, 2 tables.

  2. Report on DOE - industry workshop on Computer-Aided Catalyst Design (CACD)

    SciTech Connect (OSTI)

    Hay, P.J.

    1994-07-01

    Representatives from industry, national laboratories, and the DOE met to review the status of the DOE-sponsored Computer-Aided Catalyst Design (CACD) program and to assess current industrial needs in CACD. Of the 40 participants at the workshop, nearly half were from industry representing 12 companies--Arco Chemical, Amoco Chemical, Biosym, Dow, DuPont, Exxon, Ford, General Motors, Mobil, Monsanto, W.R. Grace and Union Carbide--that included nine of the largest chemical producers in the U.S. representing $61 billion in chemical sales in 1993. An overview of developments in catalyst modeling at the national laboratories was presented, and current CACD-related activities at each of the companies were described by the industrial participants. The CACD program is addressing important industry needs and is having a significant impact despite the current limited scope and budget. The industrial participants urged the program to continue to target specific areas and to encourage collaborative work among the national labs. Industrial participants expressed strong interest in increased interactions with CACD activities at the national labs, where competencies in theory, modeling, and simulation complement the traditional strengths of catalysis expertise in industry. The chemical, refining and automotive industries face continual economic and environmental pressures for now or improved catalytic processes that are more efficient and produce fewer undesirable byproducts. CACD is viewed as an effective means to enhance experimental catalysis research. The industrial participants attested to the importance of developing and applying catalysis modeling capabilities. The companies represented at the meeting had varying degrees of activity in this area, and many already had significant interactions with national labs. As potential users of this technology, they strongly endorsed the work in the CACD program in the development of modeling capabilities.

  3. EFFECTS OF ONE WEEK TRITIUM EXPOSURE ON EPDM ELASTOMER

    SciTech Connect (OSTI)

    Clark, E

    2007-06-07

    This report documents test results for the exposure of four formulations of EPDM (ethylene-propylene diene monomer) elastomer to tritium gas at one atmosphere for approximately one week and characterization of material property changes and changes to the exposure gas during exposure. All EPDM samples were provided by Los Alamos National Laboratory (LANL). Material properties that were characterized include mass, sample dimensions, appearance, flexibility, and dynamic mechanical properties. The glass transition temperature was determined by analysis of the dynamic mechanical property data per ASTM standards. No change of glass transition temperature due to the short tritium gas exposure was observed. Filled and unfilled formulations of Dupont{reg_sign} Nordel{trademark} 1440 had a slightly higher glass transition temperature than filled and unfilled formulations of Uniroyal{reg_sign} Royalene{reg_sign} 580H; filled formulations had the same glass transition as unfilled. The exposed samples appeared the same as before exposure--there was no evidence of discoloration, and no residue on stainless steel spacers contacting the samples during exposure was observed. The exposed samples remained flexible--all formulations passed a break test without failing. The unique properties of polymers make them ideal for certain components in gas handling systems. Specifically, the resiliency of elastomers is ideal for sealing surfaces, for example in valves. EPDM, initially developed in the 1960s, is a hydrocarbon polymer used extensively for sealing applications. EPDM is used for its excellent combination of properties including high/low-temperature resistance, radiation resistance, aging resistance, and good mechanical properties. This report summarizes initial work to characterize effects of tritium gas exposure on samples of four types of EPDM elastomer: graphite filled and unfilled formulations of Nordel{trademark} 1440 and Royalene{reg_sign} 580H.

  4. STUDY OF SOLVENT AND CATALYST INTERACTIONS IN DIRECT COAL LIQUEFACTION

    SciTech Connect (OSTI)

    Michael T. Klein

    1998-10-01

    Major objectives of the present project are to develop a better understanding of the roles of the catalyst and the liquefaction solvent in the coal liquefaction process. An open question concerning the role of the catalyst is whether intimate contact between the catalyst and the coal particles is important or required. To answer this question, it had been planned to coat an active catalyst with a porous silica coating which was found to retain catalyst activity while preventing actual contact between catalyst and coal. Consultation with people in DuPont who coat catalysts for increasing abrasion resistance have indicated that only portions of the catalyst are coated by their process (spray drying) and that sections of uncoated catalyst remain. For that reason, it was decided to suspend the catalyst in a basket separated from the coal in the reactor. The basket walls were to be permeable to the liquefaction solvent but not to the coal particles. Several such baskets were constructed of stainless steel with holes which would not permit passage of coal particles larger than 30 mesh. Liquefactions run with the coal of greater than 30 mesh size gave normal conversion of coal to liquid in the absence of catalyst in the basket, but substantially increased conversion when Ni/Mo on alumina catalyst was in the basket. While this result is interesting and suggestive of some kind of mass transfer of soluble material occurring between the catalyst and the coal, it does not eliminate the possibility of breakdown of the coal particle into particle sizes permeable to the basket. Indeed, a small amount of fine coal has been found inside the basket. To determine whether fine coal from breakdown of the coal particles is responsible for the conversion, a new basket is being prepared with 0.5{micro}m pore size.

  5. Direct-Current Resistivity Survey At Mokapu Penninsula Area ...

    Open Energy Info (EERE)

    analysis performed on the Koolau caldera area (Kauahikaua, 1981 a) synthesized existing self-potential, gravity, seismic and aeromagnetic data with recently acquired resistivity...

  6. Aeromagnetic Survey At Mokapu Penninsula Area (Thomas, 1986)...

    Open Energy Info (EERE)

    analysis performed on the Koolau caldera area (Kauahikaua, 1981 a) synthesized existing self-potential, gravity, seismic and aeromagnetic data with recently acquired resistivity...

  7. Zenergy International Inc | Open Energy Information

    Open Energy Info (EERE)

    Product: Chicago-based company that is engaged in the development and acquisition of biofuel sites, including construction, acquiring existing facilities, and operating biodiesel...

  8. Plexus Sol | Open Energy Information

    Open Energy Info (EERE)

    Plexus Sol Jump to: navigation, search Name: Plexus Sol Place: Reunion Island, France Product: PV project developer in Reunion Island, 95% acquired by French Sechilienne-Sidec in...

  9. Ames Laboratory scientist inducted into National Academy of Inventors...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... license Ames Laboratory's titanium atomization patents. In 2014, IPAT was acquired by Praxair, a Fortune 250 company and one of the world's largest producers of gases and ...

  10. FACTSHEET: Energy Department Launches Open-Source Online Training...

    Broader source: Energy.gov (indexed) [DOE]

    ... opportunities to earn manufacturing credentials that are accepted across state lines, ... workers acquire the skills and credentials they need for high-wage, high-skill employment. ...

  11. Executive Order 13592: Improving American Indian and Alaska Native...

    Office of Environmental Management (EM)

    ... or training programs and acquire degrees, certificates, or industry- recognized credentials and obtain quality jobs, and expanding access to high-quality education programs ...

  12. Nonproliferation | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    or rogue nations will acquire nuclear weapons or other weapons of mass destruction (WMD). NNSA, through its Office of Defense Nuclear Nonproliferation (DNN), works closely ...

  13. Fuel Cell Vehicles Enhance NREL Hydrogen Research Capabilities...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Expanded research, development, and testing activities will help advance fuel cell electric vehicle technology. The National Renewable Energy Laboratory (NREL) has acquired four ...

  14. Ecologica Assessoria Ltda CantorCO2e | Open Energy Information

    Open Energy Info (EERE)

    Carbon Product: Sao Paulo-based CDM project consultant focused on carbon credit marketing, strategic consultancy and project design relating to emission reductions, acquired...

  15. Philips Solar | Open Energy Information

    Open Energy Info (EERE)

    Netherlands Zip: 5600 JM Sector: Solar Product: Responsible for the development and marketing of grid-connected solar inverters; acquired and absorbed by Steca in 2005....

  16. Laser-to-hot-electron conversion limitations in relativistic...

    Office of Scientific and Technical Information (OSTI)

    and differing trends across multiple target types acquired from two separate laser ... edge of the main pulse measurably alters target evolution and relativistic electron ...

  17. Pilgrim Hot Springs, Alaska Geothermal Project | Open Energy...

    Open Energy Info (EERE)

    project the University of Alaska is proposing a new and innovative iterative method of digital processing of acquired thermal infrared data adapted from thermal data processing...

  18. Hazmat Team Planning Guide

    Broader source: Energy.gov [DOE]

    This manual will assist local fire departments in identifying, acquiring, and maintaining the hazardous materials response equipment and trained personnel appropriate for their locale.

  19. Uramin Inc | Open Energy Information

    Open Energy Info (EERE)

    UraMin Inc. is an international mining company established to acquire and develop uranium properties throughout the world. Coordinates: 51.506325, -0.127144 Show Map...

  20. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    second sample rate). Software to quality control the data acquired from this revised method is now under development. Communication difficulties with hardware required a...

  1. Property:Abstract | Open Energy Information

    Open Energy Info (EERE)

    from a basically ubiquitous resource, independent of site subsurface conditions ("EGS technology"); 2) acquiring experience about possible changes of an EGS heat exchanger with...

  2. W. E. Mott, Director,

    Office of Legacy Management (LM)

    The facility was subsequently acquired by the Mobil Oil Corporation. Telephone discussions ... plant scale work done at the Mobil Oil (now Conserv, Inc.) Nichols, Florida facility. ...

  3. ADMINISTRATIVE RECORDS SCHEDULE 21: AUDIOVISUAL RECORDS | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AUDIOVISUAL RECORDS ADMINISTRATIVE RECORDS SCHEDULE 21: AUDIOVISUAL RECORDS This schedule covers audiovisual and related records created by or for Department and those acquired in ...

  4. Geographic Information System At Cove Fort Area - Vapor (Nash...

    Open Energy Info (EERE)

    Unknown Notes An example, shown in Figure 1, shows results from the classification of big sagebrush (Artimesia tridentata) spectra, acquired over the Cove Fort-Sulphurdale,...

  5. Geographic Information System At Cove Fort Area (Nash, Et Al...

    Open Energy Info (EERE)

    Unknown Notes An example, shown in Figure 1, shows results from the classification of big sagebrush (Artimesia tridentata) spectra, acquired over the Cove Fort-Sulphurdale,...

  6. Palo Alto Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Jump to: navigation, search Name: Palo Alto Solar Place: California Sector: Solar Product: PV system installer acquired by SolarCity in Semptember 2006. References: Palo Alto...

  7. DOE ZERH Webinar: High-Performance Home Sales Training, Part...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The rest of the sales training will address five key sales concepts along with the skills, tools, and practice needed to implement them: Knowledge Matters - how to acquire ...

  8. Sunvalley | Open Energy Information

    Open Energy Info (EERE)

    Place: Haining, Zhejiang Province, China Sector: Solar Product: A Zhejiang-based PV cell manufacturer, acquired by Jinko Solar in July 2009. References: Sunvalley1 This...

  9. Ram Power | Open Energy Information

    Open Energy Info (EERE)

    ("Ram Power" or the "Company") (TSX:RPG) is a renewable energy company focused in the business of acquiring, exploring, developing and operating geothermal power projects to...

  10. Departmental Response:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... strengthen incentives for nations to enjoy the benefits of nuclear energy without acquiring enrichment and reprocessing capabilities. DOE concurs, and notes that DOENE ...

  11. Aspen Pipeline | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Aspen Pipeline Place: Houston, Texas Zip: 77057 Product: US firm which acquires, builds and owns pipelines, gathering systems and distribution systems....

  12. Declination Solar | Open Energy Information

    Open Energy Info (EERE)

    San Francisco, California Sector: Solar Product: San Francisco solar installation firm acquired by SolarCity in September 2006. References: Declination Solar1 This article...

  13. Hundred-Fold Improvement in Temperature Mapping Reveals the Stresses...

    Office of Science (SC) Website

    ... Data presented in this article were acquired at the Center for Electron Microscopy and Microanalysis at the University of Southern California. Work at the Molecular Foundry was ...

  14. Microsoft Word - ARRA Final Report Cover

    Broader source: Energy.gov (indexed) [DOE]

    According to project documentation, 3 million of the total cost will be dedicated to acquiring and installing a Performance Optimized Data Center (POD) at NETL's Morgantown, West ...

  15. Edisun Power AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Zurich, Switzerland Zip: 8006 Sector: Solar Product: Edisun Power Europe AG finances, acquires and operates solar power installations, and markets solar power....

  16. Delta Power Company LLC | Open Energy Information

    Open Energy Info (EERE)

    Company LLC Place: Morristown, New Jersey Zip: NJ 07960 Product: Develops, acquires, finances, and manages independent power projects throughout the US. Coordinates: 44.555834,...

  17. Reflection Survey At Lightning Dock Area (Cunniff & Bowers, 2005...

    Open Energy Info (EERE)

    time. (For a given velocity model, this two-way travel time is equivalent to several kilometers of depth penetration.) Subsequently, LDG used Bird's services to acquire new...

  18. Audit Report: IG-0725 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    6 Information Technology Support Services at the Department of Energy's Operating Contractors Several issues detracted from the Department of Energy's or Acquired Services...

  19. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interpretation of AFM data acquired during analysis. Scientific Achievement Using in-situ Atomic Force Microscopy to directly observe S-layer formation on mica chips, Foundry...

  20. ARM TR-008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The ARM program has acquired more than 100 pyranometers and pyrheliometers for measuring shortwave solar irradiance. The data quality of the measurements from these radiometers ...

  1. SunFuel Midstream | Open Energy Information

    Open Energy Info (EERE)

    acquires, builds, finances and operates biofuel infrastructure assets such as biofuel storage and blending terminals, rail, barge and truck receiving terminals and rail and truck...

  2. Microsoft PowerPoint - FY2016 Senior Professional Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Ability to acquire and administer human, financial, material, and information resources in a manner that instills public trust and accomplishes the program's mission Building ...

  3. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Assessment of Cable Aging Equipment, Status of Acquired Materials, and Experimental Matrix at the Pacific Northwest National Laboratory Fifield, Leonard S. ; Westman, Matthew P. ; ...

  4. fwp406-408-409-LANL-2 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Accomplishments LANL acquired a Wolfcamp core sample (from a depth of 10500 feet, ... The researchers conducted SANS and USANS measurements of a Wolfcamp shale sample (provided ...

  5. Full Coverage Shaped Hole Film Cooling in an Accelerating Boundary...

    Office of Scientific and Technical Information (OSTI)

    acquired in the accelerating flows over a large cylindrical leading edge test surface. ... cooling data taken at the same coolant flow rates over the same cylindrical test surface. ...

  6. Acquisition Letter/Financial Assistance Letter (ALIFAL) 201 0...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    With Internet Protocol Version 6 (IPv6) Acquisition LetterFinancial Assistance Letter (ALIFAL) 201 0-06, Acquiring Information Technology, Requirement to Comply With Internet ...

  7. Biofutures International Plc | Open Energy Information

    Open Energy Info (EERE)

    Sector: Renewable Energy Product: Shell company set up in May 2006 to establish, invest in or acquire assets, businesses or companies in the renewable fuels industry in Asia...

  8. ENERGY CONSUMPTION SURVEY

    U.S. Energy Information Administration (EIA) Indexed Site

    acquisition 1985 RTECS Data Manipulation Procedures ManualOctober 19865-46 PUT Source: Language: System context: Inputs: and disposition. If the vehicle was acquired before July...

  9. Recycled Energy Development | Open Energy Information

    Open Energy Info (EERE)

    search Name: Recycled Energy Development Place: Westmont, Illinois Zip: 60559 Product: RED acquires industrial utility plants and then builds and installs waste energy capture...

  10. SunShot-Supported Companies to Build One of the World's Largest...

    Broader source: Energy.gov (indexed) [DOE]

    the world's largest module factories in Buffalo, New York. Solar City acquired Silevo, a solar panel technology and manufacturing company whose modules have demonstrated a...

  11. The Discovery of Archaea, the 'Third Branch of Life', and Its...

    Office of Scientific and Technical Information (OSTI)

    available in documents and on the Web. Documents: A Review of Acquired Thermotolerance, Heat Shock Proteins, and Molecular Chaperones in Archaea: Heat Shock in Archaea, DOE...

  12. PoroTomo Subtask 3.4 Analysis of existing InSAR data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kurt Feigl

    Attributes of synthetic aperture radar (SAR) data acquired by TerraSAR-X and TandemX satellite missions and archived at WINSAR facility.

  13. Medical Discoveries Inc | Open Energy Information

    Open Energy Info (EERE)

    California Zip: 90045 Product: Los Angeles-based listed firm that terminated its prior drug development operations and acquired privately-held Global Clean Energy Holdings LLC in...

  14. Rotationally Augmented Flow Structures and Time Varying Loads on Turbine Blades: Preprint

    SciTech Connect (OSTI)

    Schreck, S. J.

    2007-01-01

    To better understand wind turbine flow physics, time dependent blade surface pressure data were acquired from the NREL Unsteady Aerodynamics Experiment.

  15. Final Conservation Billing Credit Policy Supplement Background...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Customers subject to I-937 must acquire conservation independent of BPA's conservation acquisition efforts. In 2007, as BPA was finalizing its Regional Dialogue Policy, several...

  16. Three-dimensional magnetotelluric characterization of the Coso...

    Open Energy Info (EERE)

    array profiling has been acquired over the east flank of the Coso geothermal system, CA, USA. Due to production related electromagnetic (EM) noise the permanent observatory at...

  17. Utah Code Title 73, Chapter 3, Appropriation | Open Energy Information

    Open Energy Info (EERE)

    (Manner of acquiring water rights) as established by the Utah Legislature in Salt Lake City, Utah. Published NA Year Signed or Took Effect 2012 Legal Citation Not...

  18. Taiwan Oasis Technology Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Name: Taiwan Oasis Technology Co Ltd Place: Taoyuan, Taiwan Sector: Solar Product: A LED maker, also acquired solar module production capacity. References: Taiwan Oasis...

  19. Advanced Lighting Systems | Open Energy Information

    Open Energy Info (EERE)

    Minnesota Zip: 56378 Product: Advanced Lighting Systems (ALS) provides a number of LED and fiber optic lighting solutions. It was acquired by Nexxus Lighting in September...

  20. ARM - Publications: Science Team Meeting Documents: Abstracts...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Freer, M. and McFarquhar, G. Algorithms for Processing Cloud Microphysical Data Acquired by Atmospheric Radiation Measurement Program Unmanned Aerospace Vehicle Applications to ...

  1. 5(b)/9(c) Final Revised Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of electric power that a customer acquires from an identified or unidentified electricity-producing unit or units by contract purchase, and for which the amount received by...

  2. 2008-07-31 Draft NR Block Template

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Customer Name acquires from an identified or unidentified electricity-producing unit by contract purchase, and for which the amount received by Customer Name does not...

  3. ARM - Instrument - wsi

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acquires images of the sky dome through three spectral filters (neutral, red, and blue). ... Output Datastreams 02wsipartradjpg : WSI: stationary calibrated red or clear quicklook ...

  4. ARM TR-008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acquires images of the sky dome through three spectral filters (neutral, red, and blue). ... Calculated data: Sample cloud decision image determined from the redblue ratio image and ...

  5. Localized Plasticity in the Streamlined Genomes of Vinyl Chloride...

    Office of Scientific and Technical Information (OSTI)

    in distinct genomic islands (GEIs) with different predicted integration sites, suggesting that these genes were acquired horizontally and independently by distinct mechanisms. ...

  6. Oversight of Performance-based Contracts

    Broader source: Energy.gov [DOE]

    DOE's use of performance-based approaches in acquiring everything from routine services to construction of complex research facilities to environmental clean-up has yielded impressive dividends...

  7. SU-E-T-476: Quality Assurance for Gamma Knife Perfexion Using...

    Office of Scientific and Technical Information (OSTI)

    film was inserted in the Lucy phantom and exposed to a single shot for each collimator. Relative output factors were measured using the three detectors while profiles acquired...

  8. Low Income Energy Efficiency Workgroup Meeting #1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for a session at the Efficiency Exchange conference in April and is looking for winning strategies for acquiring low income energy efficiency. The first session focused on...

  9. Efforts by the Department of Energy to Ensure Energy-Efficient...

    Office of Environmental Management (EM)

    ... for potential cost savings related to energy ... from experimental solar panels at Sandia National ... for acquiring and installing a Performance Optimized ...

  10. Cellnet | Open Energy Information

    Open Energy Info (EERE)

    Georgia-based provider of real-time automated metre reading and distribution automation solutions to the utility industry, acquired by Bayard Group in November 2006 and...

  11. 4 Tesla Magnet Facility | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Tesla Magnet Facility 4 Tesla Magnet Facility Argonne researchers recently acquired two decommissioned magnets from magnetic resonance imaging (MRI) scanners from hospitals in ...

  12. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Transuranic elements are accumulated in the electrorefining salt and extracted as a uraniumtransuranicrare earth product using a liquid cadmium cathode (LCC) in order to acquire ...

  13. Sandia National Laboratories: Electromagnetic Environments Simulator...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High bandwidth oscilloscopes and spectrum analyzers are used to acquire transient and CW ...m @ 4 m Related Links Pulsed Power Electromagnetic Environments Simulator (EMES) ...

  14. Pump Selection Considerations: Industrial Technologies Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and drive motor. Process requirements may be met by providing a constant flow rate (with onoff control and storage ... * Use life cycle costing techniques to justify acquiring ...

  15. MAT tec Engineering GmbH | Open Energy Information

    Open Energy Info (EERE)

    search Name: MAT-tec Engineering GmbH Place: Willich, Germany Zip: 47877 Sector: Bioenergy Product: Bioenergy systems integration company, acquired and integrated into...

  16. Stirling Cycles Inc | Open Energy Information

    Open Energy Info (EERE)

    search Name: Stirling Cycles Inc Place: California Product: A company developing Stirling engine technology at Idealab, acquired by Infinia in June 2007. References:...

  17. Renewable Energy Project Development and Finance: Advanced Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Most costly for Tribedeveloper to acquire long-term ownership of project (large cash infusion year 10) * Tribedeveloper operates the project * Requires largest equity ...

  18. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Data Center Gets a Big Boost Bookmark and Share In addition to providing database support to the ARM Program, the External Data Center (XDC) identifies and acquires ...

  19. EIS-0321: Draft Environmental Impact Statement | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Condon Wind Project This EIS evaluates the potential environmental impacts of executing one or more power purchase and transmission services agreements to acquire and transmit up...

  20. Api Nova Energia Srl | Open Energy Information

    Open Energy Info (EERE)

    search Name: Api Nova Energia Srl Place: Roma, Italy Zip: 198 Sector: Renewable Energy Product: Develops, builds, finances, acquires, owns and operates energy production...

  1. NETL: Available Property

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and provides opportunities for colleges and universities to acquire laboratoryequipment. ... Property Sales Laboratory Equipment Donation Grant Program (LEDP) (formerly known as ...

  2. NETL Business Opportunities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NETL offers surplus equipment for sale to the public and provides opportunities for colleges and universities to acquire laboratoryequipment. More Information Visiting NETL Access ...

  3. Newsletter Southern Great Plains

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... MFRSR Calibration Capabilities. The SGP recently acquired from Pacific Northwest National Laboratory equipment needed to calibrate Multi-Filter Rotating Shadowband Radiometers ...

  4. Sustainable NREL - Site Sustainability Plan FY 2015 (Marketing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    coalition to improve the fleet's ability to access and use alternative fuels. NREL's electric vehicle charging infrastructure is metered. If NREL acquires electric fleet...

  5. United States

    Broader source: Energy.gov (indexed) [DOE]

    ... real estate interests) to enter into and use ... acquired by DOE pursuant to the terms of this Agreement." ... through any available search methods." 275 Once it has ...

  6. US Removes Last Remaining HEU from Czech Republic, Sets Nonproliferati...

    National Nuclear Security Administration (NNSA)

    never acquire a nuclear weapon, and our work ... into low enriched uranium (LEU) for use in power reactors. ... NNSA maintains and enhances the safety, security, ...

  7. Microsoft Word - AG19 1

    Broader source: Energy.gov (indexed) [DOE]

    requiring agency and forwards it to the SBA where an SBA contracting officer executes the prime contractsubcontract and acquires the authorized execution by an official of the...

  8. Western States Geothermal Company | Open Energy Information

    Open Energy Info (EERE)

    Company Place: Sparks, Nevada Zip: 89432-2627 Sector: Geothermal energy Product: Geothermal power plant developer and operator. Acquired by Ormat in 2001. Coordinates:...

  9. Avestor | Open Energy Information

    Open Energy Info (EERE)

    Avestor Jump to: navigation, search Name: Avestor Place: Quebec, Canada Zip: J4B 727 Product: After filing bankruptcy in October 2006, Avestor's assets were acquired by the...

  10. Microsoft Word - Joe Rose - Providence remarks.propane.JUR -...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Propane Industries Goal: Ensure Propane Consumers are Served The winter of 2013-2014 proved a challenge for propane consumers in acquiring adequate supply at affordable prices. ...

  11. Microsoft Word - Summary of Presentations and Comments for NYC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Fuels Transmission, Storage and Distribution ... In other words, we are acquiring oil and gas properties and ... from the production fields to American consumers. 2. ...

  12. P2Solar Inc Lassen Energy | Open Energy Information

    Open Energy Info (EERE)

    search Name: P2Solar Inc (Lassen Energy) Place: Surrey, British Columbia, Canada Zip: V Product: Has acquired rights to a PV hybrid technology, and intends to manufacture...

  13. PMB Engineering Srl | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: PMB Engineering Srl Place: Monza, Italy Zip: 20052 Product: Italian construction and engineering contractor acquired by Greentech Energy in August 2007....

  14. James Watkins | Open Energy Information

    Open Energy Info (EERE)

    Watkins Jump to: navigation, search Name: James Watkins Place: United Kingdom Product: One of the Directors of Kwikpower International, who acquired the company in 2000 References:...

  15. Headquarters Facilities Master Security Plan- Chapter 3, Personnel Security

    Office of Energy Efficiency and Renewable Energy (EERE)

    2016 Headquarters Facilities Master Security Plan - Chapter 3, Personnel Security Describes DOE Headquarters Personnel Security procedures for acquiring, maintaining, and passing security clearances.

  16. Workshop on Artefacts in X-Ray Tomography | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    optical and mechanical distortions. Together with image perturbations related to the mathematical inverse problems that are solved after acquiring the data, all of these...

  17. Renewable NRG | Open Energy Information

    Open Energy Info (EERE)

    NRG Jump to: navigation, search Name: Renewable NRG Product: Commercial and residential PV integrator and installer, based in Oregon. Acquired by SunEdison in April 2008....

  18. University of Wisconsin, Madison | OSTI, US Dept of Energy Office...

    Office of Scientific and Technical Information (OSTI)

    Wisconsin Center for Space Automation and Robotics MODIS Antenna used to track two NASA sataellites and acquire Earth's images Sophomore Jefrey Vinokur, Biochemistry Major ...

  19. Legend Investment Corp | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Legend Investment Corp Place: Michigan Zip: 48105 Sector: Solar Product: Investment company, which acquired the PV business of GiraSolar in early 2006...

  20. CAB Investment Review Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Synchrophasors This project is a five-year effort to acquire, install, test and implement synchronized Wide Area Measurement (WAM) and control technology at BPA. Synchrophasors are...

  1. Gulf Powerbeat | Open Energy Information

    Open Energy Info (EERE)

    Powerbeat Place: Bahrain Product: Bahrain-based Gulf Powerbeat manufactures long life batteries and was acquired by Time Technoplast, through Time's subsidiary NED Energy....

  2. Audit Report - Follow-up Audit on Term Assignments of Contractor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    when compared to other means of acquiring the necessary knowledge and experience. Our 2005 report on Management of Facility Contractors Assigned to the Washington, DC Area ...

  3. Uranium at Y-12: Heat Treating and Machining | Y-12 National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heat ... Uranium at Y-12: Heat Treating and Machining Posted: July 22, 2013 - 3:39pm | ... Heat treating operations allow uranium to acquire the appropriate mechanical properties ...

  4. TTW8-11-05

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... stipulate that other federal facilities have first choice in acquiring the equipment. ... John 15 years Elizabeth Young Richard Hernandez Andrew Bickerstaff Stacey Britain Timothy ...

  5. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Therefore, broadband radiometers at the ARM North Slope of Alaska (NSA) site are equipped ... loss correction methodology for surface broadband measurements acquired at the NSA site. ...

  6. Opportunity Employer / Operated by Los Alamos National Security...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Intellectual Property Assignment And Confidential Information Agreement This Agreement ... LANS any trade secrets, proprietary or confidential information which I acquired as a ...

  7. SF 6110-AC Residual Inventory of Material or Equipment Furnished...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Classified Information) (See below) Acquired Quantity Total Value Weight Remarks * NOTE: Description shall include DrawingSpecification No. and whether item is Classified, ...

  8. PoroTomo Subtask 6.5 Metadata for InSAR holdings

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Tabrez Ali

    2016-07-29

    List of synthetic aperture radar (SAR) images acquired by TerraSAR-X and TandemX satellite missions and archived at UNAVCO's WINSAR facility.

  9. PoroTomo Subtask 3.4 Analysis of existing InSAR data

    SciTech Connect (OSTI)

    Feigl, Kurt

    2014-12-26

    Attributes of synthetic aperture radar (SAR) data acquired by TerraSAR-X and TandemX satellite missions and archived at WINSAR facility.

  10. Personal Property Management | U.S. DOE Office of Science (SC...

    Office of Science (SC) Website

    Management ensures the Department utilizes the most efficient and effective processes in acquiring, managing, and disposing of personal property assets as it conducts its missions. ...

  11. ARM - Publications: Science Team Meeting Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Profiles of the aerosol extinctionbackscattering ratio, Sa, were derived from the CARL data acquired during 1998 and 1999. Large (>15%) variations in the vertical profile of Sa ...

  12. RAPID/Roadmap/5 | Open Energy Information

    Open Energy Info (EERE)

    Transmission Geothermal Hydropower Solar Tools Contribute Contact Us Drilling Overview (5) On top of acquiring the correct drilling permits a developer needs to consider issues...

  13. Port Asset Acquisition LLC | Open Energy Information

    Open Energy Info (EERE)

    Acquisition LLC Jump to: navigation, search Name: Port Asset Acquisition LLC Place: Louisiana Product: PAA was formed to acquire a fuel terminal, tanks and land in Alexandria,...

  14. United Nations Institute for Training and Research (UNITAR) ...

    Open Energy Info (EERE)

    built sustainable partnerships acquiring unique expertise and accumulating experience and knowledge to fulfil its mandate. These accomplishments have enabled UNITAR to respond to...

  15. Nonproliferation | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    community face is the possibility that terrorists or rogue nations will acquire nuclear weapons or other weapons of mass destruction (WMD). NNSA, through its Office of...

  16. Background

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MODE technology was based on Sandia-licensed compound semiconductors used in manufacturing vertical cavity surface- emitting laser components. Upon acquiring MODE, EMCORE became ...

  17. RAPID/Roadmap/5-AK-a | Open Energy Information

    Open Energy Info (EERE)

    agency overseeing regulation of geothermal drilling and well development is the Alaska Oil and Gas Conservation Commission. The developer must have acquired a lease prior to this...

  18. Y-12, ORNL and the origin of "work for others"

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory efforts to acquire its first nuclear particle accelerators and digital computers. "Because the success of nuclear flight depended on expensive and complex...

  19. IG0416.PDF

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Office of Energy Research; and the Director, Office of Nuclear Energy, Science and Technology (1) direct program managers to discontinue the practice of acquiring support ...

  20. BTX Holdings Inc | Open Energy Information

    Open Energy Info (EERE)

    Product: BTX Holdings acquires, develops, and deploys technologies to process plant derived biomass waste, extract the usable fractions, and utilise or sell the extractions in...

  1. Air Quality/Emissions Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Air QualityEmissions Resources Air QualityEmissions Resources Federal agencies and certain state governments are required to acquire alternative fuel vehicles as part of the ...

  2. Microsoft Word - IG-0778 WATCHLIST REPORT 10-01-07.doc

    Energy Savers [EERE]

    or acquired by the Government pertaining to international terrorism and counterterrorism. ... law, provide to the Terrorist Threat Integration Center now NCTC on an ongoing basis ...

  3. Zero Waste Plc | Open Energy Information

    Open Energy Info (EERE)

    acquired right to waste processing technology, which processes waste into high energy density fuel products. Coordinates: 51.506325, -0.127144 Show Map Loading map......

  4. Mr. Frank Pucciarelll Conviber, Inc.

    Office of Legacy Management (LM)

    ... to borrow or acquire, at no cost to the Owner, those plans deemed necessary ... techniques andor removing samples of contaminated materials by digging or core drilling. ...

  5. Microsoft Word - FY 2015 SP Performance Appraisal System Guidance...

    Broader source: Energy.gov (indexed) [DOE]

    Office of Executive Resources Office of the Chief Human Capital Officer U.S. Department of ... (5% - 10 %) o Acquires and administers human, financial, material, and information ...

  6. H-35 DOE-H-__ Compliance With Internet Protocol Version 6 (Ipv6...

    Broader source: Energy.gov (indexed) [DOE]

    H-35 DOE-H- Compliance With Internet Protocol Version 6 (Ipv6) In Acquiring Information Technology (July 2011) Prescription: Use as appropriate. Consider using in solicitations...

  7. Policy Flash 2011-96 | Department of Energy

    Office of Environmental Management (EM)

    versions of the following sixteen RFP Section H clause templates: 1) COMPLIANCE WITH INTERNET PROTOCOL VERSION 6 (IPV6) IN ACQUIRING INFORMATION TECHNOLOGY, 2) CONTRACTOR...

  8. IoT Interoperability at Bosch

    Broader source: Energy.gov (indexed) [DOE]

    Acquire d S oftwa re Innova tions , 2008 Bus ine s s proce s s ma na ge me nt Cloud-ba s e d IoT s olutions Acquiring P ros ys t (a nnounce d Fe brua ry 2015) P...

  9. Vehicle Infrastructure Cash-Flow Estimation--VICE 2.0; Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    Mitchell, G.

    2015-04-02

    This presentation discusses the differences between the original Vehicle and Infrastructure Cash-Flow Evaluation (VICE) Model and the revamped version, VICE 2.0. The enhanced tool can now help assess projects to acquire vehicles and infrastructure, or to acquire vehicles only.

  10. Methods, systems and devices for detecting threatening objects and for classifying magnetic data

    DOE Patents [OSTI]

    Kotter, Dale K.; Roybal, Lyle G.; Rohrbaugh, David T.; Spencer, David F.

    2012-01-24

    A method for detecting threatening objects in a security screening system. The method includes a step of classifying unique features of magnetic data as representing a threatening object. Another step includes acquiring magnetic data. Another step includes determining if the acquired magnetic data comprises a unique feature.

  11. The performance of measurement-based simple models for the x-band complex permittivity of 370 ohms/sq. Kapton XC

    SciTech Connect (OSTI)

    Glover, Brian B; Whites, Kieth W; Amert, Tony

    2009-01-01

    The X-band complex permittivity of a commercially-available, carbon loaded, polyamide film is measured. Simple though approximate models are obtained which are shown to be necessary and suitable for analytic or computational modeling of thin absorbing structures realized with the thin lossy film. The utility of each model is tested against experimental results for thin high-impedance surface (HIS) enhanced Salisbury absorbers, enhanced in the sense that the HIS augmented absorber is much thinner than a conventional Salisbury absorber. Kapton XC(reg.) is a commercially-available, carbon-loaded polyamide film manufactured by Dupont(reg.). Though these films are exceptionally durable and available in a range of surface resistivities, their effective permittivity is complex valued and, therefore, their sheet impedance is frequency dependent as is typical of carbon-loaded dielectrics. We have measured the X-band complex permittivity of Kapton XC(reg.) with a manufacture's quoted direct current (DC) sheet resistivity of approximately 370 {Omega}/sq. and thicknesses of 40.0 {mu}m. This study showed the need for relatively precise knowledge of the real part of a carbon particulate loaded, lossy thin film's permittivity in order to accurately engineer the reflection coefficient of high-impedance surface enhanced electromagnetic absorbers. Specifically, simple, approximate models can be obtained for the X-band complex pennittivity of commercially available, carbon loaded, 370 {Omega}/sq., Kapton XC(reg.) thin film. These simple, approximate models can be used in the analytic modeling of high-impedance surface enhanced X-band absorbers or computational modeling of other possibly more complicated absorbing structures which are composed, in part, of 370 {Omega}/sq. Kapton XC(reg.) and designed to operate within the X-band. Finally, the results of this study illustrate the need for simgle models for calculating the complex permittivity spectra of 370 {Omega}/sq. Kapton XC

  12. Analysis of the Durability of PEM FC Membrane Electrode Assemblies in Automotive Applications through the Fundamental Understanding of Membrane and MEA Degradation Pathways

    SciTech Connect (OSTI)

    Perry, Randal L.

    2013-10-31

    The Project focused on mitigation of degradation processes on membrane electrode assemblies. The approach was to develop a model to improve understanding of the mechanisms, and to use it to focus mitigation strategies. The detailed effects of various accelerated stress tests (ASTs) were evaluated to determine the best subset to use in model development. A combination of ASTs developed by the Fuel Cell Commercialization Conference of Japan and the Fuel Cell Tech Team were selected for use. The ASTs were compared by measuring effects on performance, running in-situ diagnostics, and performing microscopic analyses of the membrane electrode assemblies after the stress tests were complete. Nissan ran FCCJ AST protocols and performed in situ and ex-situ electrochemical testing. DuPont ran FCTT and USFCC AST protocols, performed scanning and transmission electron microscopy and ran in-situ electrochemical tests. Other ex-situ testing was performed by IIT, along with much of the data analysis and model development. These tests were then modified to generate time-dependent data of the degradation mechanisms. Three different catalyst types and four membrane variants were then used to generate data for a theoretically-based degradation model. An important part of the approach was to use commercially available materials in the electrodes and membranes made in scalable semiworks processes rather than lab-based materials. This constraint ensured all materials would be practicable for full-scale testing. The initial model for the electrode layer was tested for internal consistency and agreement with the data. A Java-based computer application was developed to analyze the time-dependent AST data using polarization curves with four different cathode gas feeds and generate model parameters. Data showed very good reproducibility and good consistency as cathode catalyst loadings were varied. At the point of termination of the project, a basic electrode model was in hand with several

  13. Gasification Plant Cost and Performance Optimization

    SciTech Connect (OSTI)

    Samuel Tam; Alan Nizamoff; Sheldon Kramer; Scott Olson; Francis Lau; Mike Roberts; David Stopek; Robert Zabransky; Jeffrey Hoffmann; Erik Shuster; Nelson Zhan

    2005-05-01

    As part of an ongoing effort of the U.S. Department of Energy (DOE) to investigate the feasibility of gasification on a broader level, Nexant, Inc. was contracted to perform a comprehensive study to provide a set of gasification alternatives for consideration by the DOE. Nexant completed the first two tasks (Tasks 1 and 2) of the ''Gasification Plant Cost and Performance Optimization Study'' for the DOE's National Energy Technology Laboratory (NETL) in 2003. These tasks evaluated the use of the E-GAS{trademark} gasification technology (now owned by ConocoPhillips) for the production of power either alone or with polygeneration of industrial grade steam, fuel gas, hydrocarbon liquids, or hydrogen. NETL expanded this effort in Task 3 to evaluate Gas Technology Institute's (GTI) fluidized bed U-GAS{reg_sign} gasifier. The Task 3 study had three main objectives. The first was to examine the application of the gasifier at an industrial application in upstate New York using a Southeastern Ohio coal. The second was to investigate the GTI gasifier in a stand-alone lignite-fueled IGCC power plant application, sited in North Dakota. The final goal was to train NETL personnel in the methods of process design and systems analysis. These objectives were divided into five subtasks. Subtasks 3.2 through 3.4 covered the technical analyses for the different design cases. Subtask 3.1 covered management activities, and Subtask 3.5 covered reporting. Conceptual designs were developed for several coal gasification facilities based on the fluidized bed U-GAS{reg_sign} gasifier. Subtask 3.2 developed two base case designs for industrial combined heat and power facilities using Southeastern Ohio coal that will be located at an upstate New York location. One base case design used an air-blown gasifier, and the other used an oxygen-blown gasifier in order to evaluate their relative economics. Subtask 3.3 developed an advanced design for an air-blown gasification combined heat and power

  14. Gas energy meter for inferential determination of thermophysical properties of a gas mixture at multiple states of the gas

    DOE Patents [OSTI]

    Morrow, Thomas B.; Kelner, Eric; Owen, Thomas E.

    2008-07-08

    A gas energy meter that acquires the data and performs the processing for an inferential determination of one or more gas properties, such as heating value, molecular weight, or density. The meter has a sensor module that acquires temperature, pressure, CO2, and speed of sound data. Data is acquired at two different states of the gas, which eliminates the need to determine the concentration of nitrogen in the gas. A processing module receives this data and uses it to perform a "two-state" inferential algorithm.

  15. Determination of the elasticity of parachute materials under dynamic loading conditions

    SciTech Connect (OSTI)

    Behr, V.L.; Clements, P.J.; Silbert, M.N.

    1996-12-31

    In the design of parachute systems it is important to use material properties that have been acquired under representative strain rates expected in flight. Without such data the designer is potentially forced to incorporate unrealistic safety margins resulting in a heavier and costlier than required design. Laboratory test data has generally been limited to that which can be acquired at quasi-steady strain rates. This paper investigates a technique, which takes advantage of advances in solid state electronics in the past ten years, to achieve an economical means of acquiring material properties under dynamic strain conditions. Data obtained with this technique is compared to standard test data for representative parachute materials.

  16. Weatherization Assistance Program (WAP) Closeout Frequently Asked...

    Energy Savers [EERE]

    A: (a) Title to supplies acquired under a grant or subgrant will vest, upon acquisition, ... under the annual appropriated grant or on any other federally-funded project or program. ...

  17. This Week In Petroleum Summary Printer-Friendly Version

    Gasoline and Diesel Fuel Update (EIA)

    reports acquiring a rail loading and unloading facility, and four storage tanks with a shell capacity of approximately 1.5 million barrels located at its refinery in Anacortes,...

  18. DOE TRANSCOM Technical Support Services DE-EM0002903 B-1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B-1 PART 1 - THE SCHEDULE SECTION B SUPPLIES OR SERVICES PRICES / COST B.01 ITEMS BEING ACQUIRED ........................................................................................................ B-2 B.02 TYPE OF CONTRACT ................................................................................................................ B-2 B.03 LIMITATION OF FUNDS ........................................................................................................... B-2 B.04 PRICE

  19. SOLICITATION, OFFER, AND AWARD 1. THIS CONTRACT IS A RATED ORDER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Section B - Supplies or Services/Prices ...................................................................................................................... 8 B.1 SERVICES BEING ACQUIRED - Research and Development - Implementation and Support .......... 8 B.2 ESTIMATED TOTAL COST OF CONTRACT ....................................................................................... 11 B.3 52.217-8 OPTION TO EXTEND SERVICES (NOV

  20. Structural Analysis of Southern Dixie Valley using LiDAR and...

    Open Energy Info (EERE)

    and characterize young faults, high resolution LiDAR and 1:12,000-scale low-sun-angle (LSA) aerial photography was acquired for the NAS Fallon study area. The LSA photos were...

  1. 2-M Probe Survey | Open Energy Information

    Open Energy Info (EERE)

    or thermistor is inserted into to acquire the data. Some examples include using a hand soil auger or using a hammer drill. The best method is dependent on the soil type at the...

  2. EERE Success Story-From Silver to Copper: SunShot Awardee TetraSun...

    Broader source: Energy.gov (indexed) [DOE]

    Solar industry leader First Solar, which operates the world's largest PV power plant in California, acquired TetraSun in 2013 and recently started a production line with the ...

  3. Image Logs At Coso Geothermal Area (2004) | Open Energy Information

    Open Energy Info (EERE)

    Coso Geothermal Region Notes During the second year of this project, wellbore logs and stress data were acquired in a new production well drilled in the Coso Geothermal Field,...

  4. OSTI, US Dept of Energy Office of Scientific and Technical Information...

    Office of Scientific and Technical Information (OSTI)

    On the acquiring side, it's essential that DOE's policy and processes reflect the latest ... Department of Energy Launches DOE PAGES(Beta) 1 year ago Basic Research and Innovation 2

  5. Microsoft Word - Dissertation_CMH_submit.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    under most similar environmental condition to the current test. 11 1.5.3. Sparse Array Signal Processing In designing a sensor system to acquire UGW data from a structure,...

  6. Affirm Toptec | Open Energy Information

    Open Energy Info (EERE)

    Name: Affirm-Toptec Place: Spain Product: Spain-based consortium formed to acquire PV cell and module manufacturer, Isofoton. References: Affirm-Toptec1 This article is a stub....

  7. Audit Report: ER-B-97-03 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Audit Report: ER-B-97-03 June 5, 1997 Audit of Proposal to Acquire Land at the Fernald Environmental Management Project PDF icon Audit Report: ER-B-97-03 More Documents & ...

  8. PSInSAR (Laney, 2005) | Open Energy Information

    Open Energy Info (EERE)

    Permanent Scatterer (PS) InSAR data to infer strain at depth, (2) working with Lane Johnson to develop a dynamic faulting model, and (3) acquiring InSAR data for the region...

  9. Ground Gravity Survey At Long Valley Caldera Geothermal Area...

    Open Energy Info (EERE)

    Permanent Scatterer (PS) InSAR data to infer strain at depth, (2) working with Lane Johnson to develop a dynamic faulting model, and (3) acquiring InSAR data for the region...

  10. AL2006-04v2.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6-04v2.pdf AL2006-04v2.pdf (157.28 KB) More Documents & Publications Acquisition LetterFinancial Assistance Letter (ALIFAL) 201 0-06, Acquiring Information Technology, Requirement ...

  11. Strategic Sourcing

    Broader source: Energy.gov [DOE]

    DOE leadership has recognized that benefits could be achieved at the federal level through an organized, systematic and collaborative approach to acquiring commonly used goods and services. The DOE...

  12. Raft River Idaho Magnetotelluric Data

    SciTech Connect (OSTI)

    Gregory Nash

    2015-05-13

    Raw magnetotelluric (MT) data covering the geothermal system at Raft River, Idaho. The data was acquired by Quantec Geoscience. This is a zipped file containing .edi raw MT data files.

  13. DOE - Office of Legacy Management -- St Louis Airport Site Vicinity...

    Office of Legacy Management (LM)

    Louis. The properties are associated with the St. Louis Airport Site. The Manhattan Engineer District (MED), a predecessor agency of the U.S. Department of Energy (DOE), acquired ...

  14. WindTronics | Open Energy Information

    Open Energy Info (EERE)

    WindTronics Jump to: navigation, search Name: WindTronics Place: Muskegon, Michigan Zip: 49440 Sector: Wind energy Product: Michigan-based WindTronics has acquired the right to...

  15. File: 070629 Lessons Learned

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... especially those flying for the first time, should bring a plethora of spare parts for critical components that are most likely to fail and that cannot be acquired in the field. ...

  16. FibreGen plc formerly Libra Natural Resources plc | Open Energy...

    Open Energy Info (EERE)

    London, United Kingdom Zip: EC2V 5DE Sector: Biomass Product: Set up to establish, invest in or acquire assets, businesses or companies involved in the natural resources...

  17. Structure of P-Glycoprotein Reveals a Molecular Basis for Poly...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Poly-Specific Drug Binding figure 1 Figure 1. Structure of P-gp. Many forms of cancer fail to respond to chemotherapy by acquiring multidrug resistance (MDR), to which has...

  18. Re Gen | Open Energy Information

    Open Energy Info (EERE)

    Re Gen Jump to: navigation, search Name: Re-Gen Place: United Kingdom Product: A biogas power generation company acquired by Infinis in January 2007, with 43.5MW current...

  19. Update on Franklin retirement plans

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Update on Franklin retirement plans Update on Franklin retirement plans February 21, 2012 by Helen He NERSC is making progress on plans to acquire our next major system. Franklin's...

  20. Altra Inc | Open Energy Information

    Open Energy Info (EERE)

    Product: Los Angeles-based company that acquires, develops and operates a portfolio of biofuel production projects. References: Altra Inc1 This article is a stub. You can help...