Powered by Deep Web Technologies
Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Double sided circuit board and a method for its manufacture  

DOE Patents (OSTI)

Conductance between the sides of a large double sided printed circuit board is provided using a method which eliminates the need for chemical immersion or photographic exposure of the entire large board. A plurality of through-holes are drilled or punched in a substratum according to the desired pattern, conductive laminae are made to adhere to both sides of the substratum covering the holes and the laminae are pressed together and permanently joined within the holes, providing conductive paths. 4 figs.

Lindenmeyer, C.W.

1988-04-14T23:59:59.000Z

2

CHARGE-BASED MOS CORRELATED DOUBLE SAMPLING COMPARATOR AND FOLDING CIRCUIT  

E-Print Network (OSTI)

CHARGE-BASED MOS CORRELATED DOUBLE SAMPLING COMPARATOR AND FOLDING CIRCUIT Roman Genov and Gert 21218-2686 E-mail: roman,gert¡ @bach.ece.jhu.edu ABSTRACT A novel charge-based comparator and folding circuit are pre- sented. Correlated double sampling comparison is performed using a log-domain integrator

Cauwenberghs, Gert

3

Circuit QED in a double quantum dot system  

SciTech Connect

Strong coupling peculiar feature is demonstrated in a coupled qubit-resonator system consisting of a GaAs double quantum dot and a coplanar waveguide resonator. Qubit-resonator coupling strength (g and the decoherence rate ? are directly derived from the experiment, assuring a strong coupling condition (g/? ? 2)

Toida, Hiraku; Nakajima, Takashi; Komiyama, Susumu [Department of Basic Science, University of Tokyo, 3-8-1 Komaba, Meguro-ku, Tokyo 153-8902 (Japan)

2013-12-04T23:59:59.000Z

4

Influence of idling and short circuits on the self-excitation of a classical double-output induction generator  

Science Journals Connector (OSTI)

Experimental results for the capacitor self-excitation of an induction generator with a short-circuited phase rotor and a classical double-output induction generator are compared. The influence of the preceding ....

A. -Z. R. Dzhendubaev; R. Yu. Barakhoev

2013-07-01T23:59:59.000Z

5

Artificial Neural Network Models for the Double-Vias in Multilayer Stripline Circuits  

Science Journals Connector (OSTI)

Multi-vias is a kind of interconnection largely existing in the multi-chip module (MCM) packages for high-speed digital circuits. In this paper, a multilayer perceptron neural network (MLPNN) is used to model ...

Bing-Zhong Wang; Shaoyun Zou

1999-07-01T23:59:59.000Z

6

Short-Circuit Characteristics of Asynchronous Generators and Double-Fed Induction Generators Inter-connected Grid  

Science Journals Connector (OSTI)

In this paper, the electrical transient mode of induction generators is studied, establishing the short-circuit current sequence component of wind generators are when faulty occuring in collect feeder, ... type, ...

Su Chang-Sheng; Li Feng-Ting; Liu Wei

2011-01-01T23:59:59.000Z

7

EA-1551: Montana Alberta Tie Ltd. (MATL) 230-KV Transmission Line  

Energy.gov (U.S. Department of Energy (DOE))

DOE started to prepare, jointly with the Montana Department of Environmental Quality (MDEQ), an EA that would also serve as a state EIS. The document would evaluate the potential environmental impacts of a proposed international transmission line that would cross the U.S.-Canada border in northwest Montana. Based on comments received on the DOE Draft EA/MDEQ Draft EIS, DOE cancelled preparation of the EA and announced preparation of DOE/EIS-0399 (of the same title).

8

EIS-0399: Montana Alberta Tie Ltd. (MATL) 230-KV Transmission Line  

Energy.gov (U.S. Department of Energy (DOE))

DOE, jointly with the Montana Department of Environmental Quality (MDEQ), prepared an EIS that evaluated the potential environmental impacts of a proposed international transmission line that would cross the U.S.-Canada border in northwest Montana.

9

Record of Decision for the Interconnection of the Sutter Power Project With the Western Area Power Administration's Keswick-Elverta/Olinda-Elverta 230-Kilovolt Double-Circuit Transmission Line, June 15, 1999  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 41 Federal Register / Vol. 64, No. 114 / Tuesday, June 15, 1999 / Notices DEPARTMENT OF ENERGY Western Area Power Administration Record of Decision for the Interconnection of the Sutter Power Project With the Western Area Power Administration's Keswick-Elverta/ Olinda-Elverta 230-Kilovolt Double- Circuit Transmission Line AGENCY: Western Area Power Administration, DOE. ACTION: Record of decision. SUMMARY: The Western Area Power Administration (Western) prepared this Record of Decision in response to a request submitted to Western for a direct interconnection of Calpine Corporation's (Calpine) proposed Sutter Power Project (SPP) with Western's electric transmission system. In response to this request, Western completed an Interconnection Feasibility Study that determined that

10

Printed Circuits  

Science Journals Connector (OSTI)

... a leading contributor to the technology of printed circuits, and the inventor of the printed foil technique now in general use.

J. C. CLULEY

1959-05-30T23:59:59.000Z

11

EIS-0399: Final EIS for the Montana Alberta Tie Ltd. (MATL) 230-KV Transmission Line Comments/Response  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 Final Environmental Impact Statement for the Montana Alberta Tie Ltd. (MATL) 230-kV Transmission Line VOLUME 2 COMMENT RESPONSE DOCUMENT September 2008 United States Department of Energy State of Montana Department of Environmental Quality COVER SHEET Responsible Agencies: U.S. Department of Energy (DOE) and Montana Department of Environmental Quality (DEQ) are co-lead agencies; the Bureau of Land Management (BLM), U.S. Department of the Interior, is a cooperating agency. Title: Final Environmental Impact Statement for the Montana Alberta Tie Ltd. (MATL) 230-kV Transmission Line (DOE/EIS-0399) Location: Cascade, Teton, Chouteau, Pondera, Toole, and Glacier counties, Montana. Contacts: For further information about this Final EIS, contact: Ellen Russell, Project Manager,

12

Polarization independent microphotonic circuits  

E-Print Network (OSTI)

Microphotonic circuits have been proposed for applications ranging from optical switching and routing to optical logic circuits. However many applications require microphotonic circuits to be polarization independent, a ...

Watts, Michael Robert, 1974-

2005-01-01T23:59:59.000Z

13

Commutation circuit for an HVDC circuit breaker  

DOE Patents (OSTI)

A commutation circuit for a high voltage DC circuit breaker incorporates a resistor capacitor combination and a charging circuit connected to the main breaker, such that a commutating capacitor is discharged in opposition to the load current to force the current in an arc after breaker opening to zero to facilitate arc interruption. In a particular embodiment, a normally open commutating circuit is connected across the contacts of a main DC circuit breaker to absorb the inductive system energy trapped by breaker opening and to limit recovery voltages to a level tolerable by the commutating circuit components. 13 figs.

Premerlani, W.J.

1981-11-10T23:59:59.000Z

14

Commutation circuit for an HVDC circuit breaker  

DOE Patents (OSTI)

A commutation circuit for a high voltage DC circuit breaker incorporates a resistor capacitor combination and a charging circuit connected to the main breaker, such that a commutating capacitor is discharged in opposition to the load current to force the current in an arc after breaker opening to zero to facilitate arc interruption. In a particular embodiment, a normally open commutating circuit is connected across the contacts of a main DC circuit breaker to absorb the inductive system energy trapped by breaker opening and to limit recovery voltages to a level tolerable by the commutating circuit components.

Premerlani, William J. (Scotia, NY)

1981-01-01T23:59:59.000Z

15

digital circuit patch bay  

Science Journals Connector (OSTI)

A patch bay in which low-level digital data circuits may be patched, monitored, and tested. Note: The digital circuit patch bay may be either (a) a...See also circuit ...

2001-01-01T23:59:59.000Z

16

Universal Quantum Circuits  

E-Print Network (OSTI)

We define and construct efficient depth-universal and almost-size-universal quantum circuits. Such circuits can be viewed as general-purpose simulators for central classes of quantum circuits and can be used to capture the computational power of the circuit class being simulated. For depth we construct universal circuits whose depth is the same order as the circuits being simulated. For size, there is a log factor blow-up in the universal circuits constructed here. We prove that this construction is nearly optimal.

Debajyoti Bera; Stephen Fenner; Frederic Green; Steve Homer

2008-04-15T23:59:59.000Z

17

Piezoelectric drive circuit  

DOE Patents (OSTI)

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes. 7 figs.

Treu, C.A. Jr.

1999-08-31T23:59:59.000Z

18

Piezoelectric drive circuit  

DOE Patents (OSTI)

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes.

Treu, Jr., Charles A. (Raymore, MO)

1999-08-31T23:59:59.000Z

19

Environmental Assessment and Finding of No Significant Impact: Western's Hoover Dam Bypass Project Phase II (Double-Circuiting a Portion of the Hoover-Mead No.5 and No.7 230-kV Transmission Lines with the Henderson-Mead No.1 230-kV Transmission Line, Clark County, Nevada)  

SciTech Connect

The U.S. Highway 93 (U.S. 93) Hoover Dam Bypass Project calls for the U.S. Department of Energy (DOE) Western Area Power Administration (Western) to remove its Arizona and Nevada (A&N) Switchyard. As a result of this action, Western must reconfigure its existing electrical transmission system in the Hoover Dam area. Western proposes to double-circuit a portion of the Hoover-Mead No.5 and No.7 230-kV Transmission Lines with the Henderson-Mead No.1 Transmission Line (see Figure 1-1). Double-circuiting is the placement of two separate electrical circuits, typically in the form of three separate conductors or bundles of conductors, on the same set of transmission line structures. The old Henderson-Hoover 230-kV Transmission Line would become the new Henderson-Mead No.1 and would extend approximately eight miles to connect with the Mead Substation. Western owns, operates, and maintains the Hoover-Mead No.5 and No.7, and Henderson-Hoover electrical power transmission lines. Additionally, approximately 0.25 miles of new right-of-way (ROW) would be needed for the Henderson-Mead No.1 when it transfers from double-circuiting with the Hoover-Mead No.7 to the Hoover-Mead No.5 at the Boulder City Tap. The proposed project would also involve a new transmission line ROW and structures where the Henderson-Mead No.1 will split from the Hoover-Mead No.5 and enter the northeast corner of the Mead Substation. Lastly, Western has proposed adding fiber optic overhead ground wire from the Hoover Power Plant to the Mead Substation on to the Henderson-Mead No.1, Hoover-Mead No.5 and No.7 Transmission Lines. The proposed project includes replacing existing transmission line tower structures, installing new structures, and adding new electrical conductors and fiber optic cables. As a consequence of these activities, ground disturbance may result from grading areas for structure placement, constructing new roads, improving existing roads for vehicle and equipment access, and from installing structures, conductors, and fiber optic cables. Project construction activities would be conducted within the existing 200-foot transmission line ROW and 50-foot access road ROW, although new spur access roads could occur outside of existing ROWs. As lead Federal agency for this action under National Environmental Policy Act (NEPA), Western must ensure that adverse environmental effects on Federal and non-Federal lands and resources are avoided or minimized. This Environmental Assessment (EA) is intended to be a concise public document that assesses the probable and known impacts to the environment from Western's Proposed Action and alternatives, and reaches a conclusion about the significance of the impacts. This EA was prepared in compliance with NEPA regulations published by the Council on Environmental Quality (40 CFR 1500-1508) and implementing procedures of the Department of Energy (10 CFR 1021).

N /A

2003-10-27T23:59:59.000Z

20

Virtual Circuits (OSCARS)  

NLE Websites -- All DOE Office Websites (Extended Search)

Virtual Circuits (OSCARS) Virtual Circuits (OSCARS) Services Overview ECS Audio/Video Conferencing Fasterdata IPv6 Network Network Performance Tools (perfSONAR) ESnet OID Registry PGP Key Service Virtual Circuits (OSCARS) OSCARS Case Study Documentation Links Hardware Requirements DOE Grids Service Transition Contact Us Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Virtual Circuits (OSCARS) ESnet's On-Demand Secure Circuits and Advance Reservation System (OSCARS) provides multi-domain, high-bandwidth virtual circuits that guarantee end-to-end network data transfer performance. Originally a research concept, OSCARS has grown into a robust production service. Currently

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Regenerative feedback resonant circuit  

DOE Patents (OSTI)

A regenerative feedback resonant circuit for measuring a transient response in a loop is disclosed. The circuit includes an amplifier for generating a signal in the loop. The circuit further includes a resonator having a resonant cavity and a material located within the cavity. The signal sent into the resonator produces a resonant frequency. A variation of the resonant frequency due to perturbations in electromagnetic properties of the material is measured.

Jones, A. Mark; Kelly, James F.; McCloy, John S.; McMakin, Douglas L.

2014-09-02T23:59:59.000Z

22

Compensated gain control circuit for buck regulator command charge circuit  

DOE Patents (OSTI)

A buck regulator command charge circuit includes a compensated-gain control signal for compensating for changes in the component values in order to achieve optimal voltage regulation. The compensated-gain control circuit includes an automatic-gain control circuit for generating a variable-gain control signal. The automatic-gain control circuit is formed of a precision rectifier circuit, a filter network, an error amplifier, and an integrator circuit.

Barrett, David M. (Albuquerque, NM)

1996-01-01T23:59:59.000Z

23

Compensated gain control circuit for buck regulator command charge circuit  

DOE Patents (OSTI)

A buck regulator command charge circuit includes a compensated-gain control signal for compensating for changes in the component values in order to achieve optimal voltage regulation. The compensated-gain control circuit includes an automatic-gain control circuit for generating a variable-gain control signal. The automatic-gain control circuit is formed of a precision rectifier circuit, a filter network, an error amplifier, and an integrator circuit. 5 figs.

Barrett, D.M.

1996-11-05T23:59:59.000Z

24

Quantum Circuits Architecture  

E-Print Network (OSTI)

We present a method for optimizing quantum circuits architecture. The method is based on the notion of "quantum comb", which describes a circuit board in which one can insert variable subcircuits. The method allows one to efficiently address novel kinds of quantum information processing tasks, such as storing-retrieving, and cloning of channels.

Giulio Chiribella; Giacomo Mauro D'Ariano; Paolo Perinotti

2007-12-09T23:59:59.000Z

25

Online circuit breaker monitoring system  

E-Print Network (OSTI)

inspection and maintenance of the circuit breakers. An automated online circuit breaker monitoring system is proposed to monitor condition, operation and status of high and medium voltage circuit breakers. By tracking equipment condition, this system could...

Djekic, Zarko

2008-10-10T23:59:59.000Z

26

Online circuit breaker monitoring system  

E-Print Network (OSTI)

inspection and maintenance of the circuit breakers. An automated online circuit breaker monitoring system is proposed to monitor condition, operation and status of high and medium voltage circuit breakers. By tracking equipment condition, this system could...

Djekic, Zarko

2009-05-15T23:59:59.000Z

27

Pepco Update on Current Construction Work and Mirant Generation Needs for  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Update on Current Construction Work and Mirant Generation Update on Current Construction Work and Mirant Generation Needs for Pepco's Planned June Line Outage Pepco Update on Current Construction Work and Mirant Generation Needs for Pepco's Planned June Line Outage Docket No. EO-05-01. Pepco needs the following to occur to provide necessary reliability to the central D.C. area during this scheduled June outage in order to complete installation of new transmission circuits to serve the central D.C. area. The situations that we would expect generation support for this outage are as follows: Two 230 KV lines in service: 264 MW generation to protect against the loss of one 230KV line. One 230KV line in service (i.e., one of the two lines has experienced an outage): 264 MW generation is required, with an additional

28

DESIGN AND IMPLEMENTATION OF A BIOMOLECULAR CIRCUIT FOR TRACKING PROTEIN CONCENTRATION  

E-Print Network (OSTI)

the levels of two double stranded DNA species through sequestration and transcriptional regulation. Synthetic the expected task. I. INTRODUCTION As biomolecular circuits in synthetic biology increase in complexity feedback regulation is a critical hurdle for the design and engineering of complex synthetic circuits

Murray, Richard M.

29

Sensor readout detector circuit  

DOE Patents (OSTI)

A sensor readout detector circuit is disclosed that is capable of detecting sensor signals down to a few nanoamperes or less in a high (microampere) background noise level. The circuit operates at a very low standby power level and is triggerable by a sensor event signal that is above a predetermined threshold level. A plurality of sensor readout detector circuits can be formed on a substrate as an integrated circuit (IC). These circuits can operate to process data from an array of sensors in parallel, with only data from active sensors being processed for digitization and analysis. This allows the IC to operate at a low power level with a high data throughput for the active sensors. The circuit may be used with many different types of sensors, including photodetectors, capacitance sensors, chemically-sensitive sensors or combinations thereof to provide a capability for recording transient events or for recording data for a predetermined period of time following an event trigger. The sensor readout detector circuit has applications for portable or satellite-based sensor systems. 6 figs.

Chu, D.D.; Thelen, D.C. Jr.

1998-08-11T23:59:59.000Z

30

Sensor readout detector circuit  

DOE Patents (OSTI)

A sensor readout detector circuit is disclosed that is capable of detecting sensor signals down to a few nanoamperes or less in a high (microampere) background noise level. The circuit operates at a very low standby power level and is triggerable by a sensor event signal that is above a predetermined threshold level. A plurality of sensor readout detector circuits can be formed on a substrate as an integrated circuit (IC). These circuits can operate to process data from an array of sensors in parallel, with only data from active sensors being processed for digitization and analysis. This allows the IC to operate at a low power level with a high data throughput for the active sensors. The circuit may be used with many different types of sensors, including photodetectors, capacitance sensors, chemically-sensitive sensors or combinations thereof to provide a capability for recording transient events or for recording data for a predetermined period of time following an event trigger. The sensor readout detector circuit has applications for portable or satellite-based sensor systems.

Chu, Dahlon D. (Albuquerque, NM); Thelen, Jr., Donald C. (Bozeman, MT)

1998-01-01T23:59:59.000Z

31

Superconducting flux flow digital circuits  

DOE Patents (OSTI)

A NOR/inverter logic gate circuit and a flip flop circuit implemented with superconducting flux flow transistors (SFFTs) are disclosed. Both circuits comprise two SFFTs with feedback lines. They have extremely low power dissipation, very high switching speeds, and the ability to interface between Josephson junction superconductor circuits and conventional microelectronics. 8 figs.

Hietala, V.M.; Martens, J.S.; Zipperian, T.E.

1995-02-14T23:59:59.000Z

32

Superconducting flux flow digital circuits  

DOE Patents (OSTI)

A NOR/inverter logic gate circuit and a flip flop circuit implemented with superconducting flux flow transistors (SFFTs). Both circuits comprise two SFFTs with feedback lines. They have extremely low power dissipation, very high switching speeds, and the ability to interface between Josephson junction superconductor circuits and conventional microelectronics.

Hietala, Vincent M. (Placitas, NM); Martens, Jon S. (Sunnyvale, CA); Zipperian, Thomas E. (Albuquerque, NM)

1995-01-01T23:59:59.000Z

33

Electrical Circuit Tester  

DOE Patents (OSTI)

An electrical circuit testing device is provided, comprising a case, a digital voltage level testing circuit with a display means, a switch to initiate measurement using the device, a non-shorting switching means for selecting pre-determined electrical wiring configurations to be tested in an outlet, a terminal block, a five-pole electrical plug mounted on the case surface and a set of adapters that can be used for various multiple-pronged electrical outlet configurations for voltages from 100 600 VAC from 50 100 Hz.

Love, Frank (Amarillo, TX)

2006-04-18T23:59:59.000Z

34

Bioluminescent bioreporter integrated circuit  

DOE Patents (OSTI)

Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

Simpson, Michael L. (Knoxville, TN); Sayler, Gary S. (Blaine, TN); Paulus, Michael J. (Knoxville, TN)

2000-01-01T23:59:59.000Z

35

LABORATORY V ELECTRIC CIRCUITS  

E-Print Network (OSTI)

Lab V -1 LABORATORY V ELECTRIC CIRCUITS Electrical devices are the cornerstones of our modern world understanding of them. In the previous laboratory, you studied the behavior of electric fields and their effect on the motion of electrons using a cathode ray tube (CRT). This beam of electrons is one example of an electric

Minnesota, University of

36

Circuit breaker lockout device  

SciTech Connect

An improved lockout assembly for locking a circuit breaker in a selected off or on position is provided. The lockout assembly includes a lock block and a lock pin. The lock block has a hollow interior which fits over the free end of a switch handle of the circuit breaker. The lock block includes at least one hole that is placed in registration with a hole in the free end of the switch handle. A lock tab on the lock block serves to align and register the respective holes on the lock block and switch handle. A lock pin is inserted through the registered holes and serves to connect the lock block to the switch handle. Once the lock block and the switch handle are connected, the position of the switch handle is prevented from being changed by the lock tab bumping up against a stationary housing portion of the circuit breaker. When the lock pin installed, an apertured-end portion of the lock pin is in registration with another hole on the lock block. Then a special scissors conforming to O.S.H.A. regulations can be installed, with one or more padlocks, on the lockout assembly to prevent removal of the lock pin from the lockout assembly, thereby preventing removal of the lockout assembly from the circuit breaker.

Kozlowski, Lawrence J. (New Kensington, PA); Shirey, Lawrence A. (North Huntingdon, PA)

1992-01-01T23:59:59.000Z

37

Circuit breaker lockout device  

DOE Patents (OSTI)

An improved lockout assembly for locking a circuit breaker in a selected off or on position is provided. The lockout assembly includes a lock block and a lock pin. The lock block has a hollow interior which fits over the free end of a switch handle of the circuit breaker. The lock block includes at least one hole that is placed in registration with a hole in the free end of the switch handle. A lock tab on the lock block serves to align and register the respective holes on the lock block and switch handle. A lock pin is inserted through the registered holes and serves to connect the lock block to the switch handle. Once the lock block and the switch handle are connected, the position of the switch handle is prevented from being changed by the lock tab bumping up against a stationary housing portion of the circuit breaker. When the lock pin installed, an apertured-end portion of the lock pin is in registration with another hole on the lock block. Then a special scissors conforming to O.S.H.A. regulations can be installed, with one or more padlocks, on the lockout assembly to prevent removal of the lock pin from the lockout assembly, thereby preventing removal of the lockout assembly from the circuit breaker. 2 figs.

Kozlowski, L.J.; Shirey, L.A.

1992-11-24T23:59:59.000Z

38

Circuit breaker lockout device  

SciTech Connect

An improved lockout assembly for locking a circuit breaker in a selected off or on position is provided. The lockout assembly includes a lock block and a lock pin. The lock block has a hollow interior which fits over the free end of a switch handle of the circuit breaker. The lock block includes at least one hole that is placed in registration with a hole in the free end of the switch handle. A lock tab on the lock block serves to align and register the respective holes on the lock block and switch handle. A lock pin is inserted through the registered holes and serves to connect the lock block to the switch handle. Once the lock block and the switch handle are connected, the position of the switch handle is prevented from being changed by the lock tab bumping up against a stationary housing portion of the circuit breaker. When the lock pin is installed, an apertured-end portion of the lock pin is in registration with another hole on the lock block. Then a special scissors conforming to O.S.H.A. regulations can be installed, with one or more padlocks, on the lockout assembly to prevent removal of the lock pin from the lockout assembly, thereby preventing removal of the lockout assembly from the circuit breaker.

Kozlowski, L.J.; Shirey, L.A.

1991-12-31T23:59:59.000Z

39

Optimal tunneling enhances the quantum photovoltaic effect in double quantum dots  

E-Print Network (OSTI)

We investigate the quantum photovoltaic effect in double quantum dots by applying the nonequilibrium quantum master equation. A drastic suppression of the photovoltaic current is observed near the open circuit voltage, ...

Wang, Chen

40

Push-pull radio frequency circuit with integral transistion to waveguide output  

DOE Patents (OSTI)

A radio frequency circuit for ICRF heating includes a resonant push-pull circuit, a double ridged rectangular waveguide, and a coupling transition which joins the waveguide to the resonant circuit. The resonant circuit includes two cylindrical conductors mounted side by side and two power vacuum tubes attached to respective ends of a cylindrical conductor. A conductive yoke is located at the other end of the cylindrical conductors to short circuit the two cylindrical conductors. The coupling transition includes two relatively flat rectangular conductors extending perpendicular to the longitudinal axes of a respective cylindrical conductor to which the flat conductor is attached intermediate the ends thereof. Conductive side covers and end covers are also provided for forming pockets in the waveguide into which the flat conductors extend when the waveguide is attached to a shielding enclosure surrounding the resonant circuit.

Bennett, Wilfred P. (21 Catskill Ct., Belle Mead, NJ 08502)

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Power system with an integrated lubrication circuit  

DOE Patents (OSTI)

A power system includes an engine having a first lubrication circuit and at least one auxiliary power unit having a second lubrication circuit. The first lubrication circuit is in fluid communication with the second lubrication circuit.

Hoff, Brian D. (East Peoria, IL); Akasam, Sivaprasad (Peoria, IL); Algrain, Marcelo C. (Peoria, IL); Johnson, Kris W. (Washington, IL); Lane, William H. (Chillicothe, IL)

2009-11-10T23:59:59.000Z

42

Sustainability Double Degree Double Degree Info  

E-Print Network (OSTI)

Sustainability Double Degree Double Degree Info: · 36 credits in B for graduation. Sustainability Core: Take each course below for a total of 17 -20 credits. Term/Grade Course _____ ____ *NR 350 (4) Sustainable

Grünwald, Niklaus J.

43

LC-circuit calorimetry  

SciTech Connect

We present a new type of calorimeter in which we couple an unknown heat capacity with the aid of Peltier elements to an electrical circuit. The use of an electrical inductance and an amplifier in the circuit allows us to achieve autonomous oscillations, and the measurement of the corresponding resonance frequency makes it possible to accurately measure the heat capacity with an intrinsic statistical uncertainty that decreases as {approx}t{sub m}{sup -3/2} with measuring time t{sub m}, as opposed to a corresponding uncertainty {approx}t{sub m}{sup -1/2} in the conventional alternating current method to measure heat capacities. We have built a demonstration experiment to show the feasibility of the new technique, and we have tested it on a gadolinium sample at its transition to the ferromagnetic state.

Bossen, O.; Schilling, A. [Physik-Institut der Universitaet Zuerich, Winterthurerstrasse 190, 8057 Zuerich (Switzerland)

2011-09-15T23:59:59.000Z

44

The Violin as a Circuit  

Science Journals Connector (OSTI)

The paper applies elementary circuit ideas to bowed?string instruments and their component parts. Parameters are defined and calculations based on simple circuit diagrams for the main resonance and the air resonance; curves describe their combined performance. The relative importance of circuit resistanceswood loss radiation and wall?surface lossis discussed. Wall?surface loss is an important component of air decrement. No material improvement is to be expected from change in decrement or enclosure volume.

John C. Schelleng

1963-01-01T23:59:59.000Z

45

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 18190 of 28,905 results. 81 - 18190 of 28,905 results. Download FE-Docket No. 99-1: Petition to intervene of Calpine Power Services Company http://energy.gov/oe/downloads/fe-docket-no-99-1-petition-intervene-calpine-power-services-company Download Docket No. EO-05-01: Further Notice of 230kV Circuit Planned Outages http://energy.gov/oe/downloads/docket-no-eo-05-01-further-notice-230kv-circuit-planned-outages Download Cover Letter for Motion to Intervene and Comments of the District of Columbia Government http://energy.gov/oe/downloads/cover-letter-motion-intervene-and-comments-district-columbia-government Download Further Notice of 230kV Circuit Planned Outages http://energy.gov/oe/downloads/further-notice-230kv-circuit-planned-outages Download Notice of Unplanned Outage at the Mirant Potomac River Plant

46

Cell signaling systems that contain positive-feedback loops or double-negative feedback loops can, in principle, convert  

E-Print Network (OSTI)

. These circuits were originally envisioned as ways of achieving self-sustaining patterns of gene expression, but it is easy to see how double-negative feedback at a post-translational level could produce self-sustaining

47

Analog Circuit Design Spring 2008  

E-Print Network (OSTI)

Circuits, 3rd ed., McGraw Hill, 2002. Topics: 1. Op amp fundamentals (1 class period) 2. Op amp circuits honesty policy is fully described in the student handbook, and students are fully expected to adhere to it to an F for the course grade, and will be administered according to the student handbook. Class notes

Joiner, Laurie L.

48

Transmission Line Circuit Alexander Glasser  

E-Print Network (OSTI)

Chaos in a Transmission Line Circuit Alexander Glasser Marshal Miller With... Prof. Edward Ott Prof times become shorter, circuit connections behave more and more like transmission lines. Theoretical(t) - Transmission Line (Zo, T) #12;5 Cf/Cr 1000 Vf Capacitance Voltage Cf Cr Model for Nonlinear Capacitor

Anlage, Steven

49

NEURAL CIRCUITS ORIGINAL RESEARCH ARTICLE  

E-Print Network (OSTI)

NEURAL CIRCUITS ORIGINAL RESEARCH ARTICLE published: 14 May 2010 doi: 10.3389/fncir.2010.00013 Frontiers in Neural Circuits www.frontiersin.org May 2010 | Volume 4 | Article 13 | 1 Signal processing a more holistic standpoint (Roberts, 1979; Bialek et al., 1991). For a continuously firing cell

Trauner, Dirk

50

Modeling cortical circuits.  

SciTech Connect

The neocortex is perhaps the highest region of the human brain, where audio and visual perception takes place along with many important cognitive functions. An important research goal is to describe the mechanisms implemented by the neocortex. There is an apparent regularity in the structure of the neocortex [Brodmann 1909, Mountcastle 1957] which may help simplify this task. The work reported here addresses the problem of how to describe the putative repeated units ('cortical circuits') in a manner that is easily understood and manipulated, with the long-term goal of developing a mathematical and algorithmic description of their function. The approach is to reduce each algorithm to an enhanced perceptron-like structure and describe its computation using difference equations. We organize this algorithmic processing into larger structures based on physiological observations, and implement key modeling concepts in software which runs on parallel computing hardware.

Rohrer, Brandon Robinson; Rothganger, Fredrick H.; Verzi, Stephen J.; Xavier, Patrick Gordon

2010-09-01T23:59:59.000Z

51

Photoconductive circuit element reflectometer  

DOE Patents (OSTI)

A photoconductive reflectometer for characterizing semiconductor devices at millimeter wavelength frequencies where a first photoconductive circuit element (PCE) is biased by a direct current voltage source and produces short electrical pulses when excited into conductance by short first laser light pulses. The electrical pulses are electronically conditioned to improve the frequency related amplitude characteristics of the pulses which thereafter propagate along a transmission line to a device under test. Second PCEs are connected along the transmission line to sample the signals on the transmission line when excited into conductance by short second laser light pulses, spaced apart in time a determinable period from the first laser light pulses. Electronic filters connected to each of the second PCEs act as low-pass filters and remove parasitic interference from the sampled signals and output the sampled signals in the form of slowed-motion images of the signals on the transmission line. 4 figs.

Rauscher, C.

1987-12-07T23:59:59.000Z

52

Photoconductive circuit element reflectometer  

DOE Patents (OSTI)

A photoconductive reflectometer for characterizing semiconductor devices at millimeter wavelength frequencies where a first photoconductive circuit element (PCE) is biased by a direct current voltage source and produces short electrical pulses when excited into conductance by short first laser light pulses. The electrical pulses are electronically conditioned to improve the frequency related amplitude characteristics of the pulses which thereafter propagate along a transmission line to a device under test. Second PCEs are connected along the transmission line to sample the signals on the transmission line when excited into conductance by short second laser light pulses, spaced apart in time a variable period from the first laser light pulses. Electronic filters connected to each of the second PCEs act as low-pass filters and remove parasitic interference from the sampled signals and output the sampled signals in the form of slowed-motion images of the signals on the transmission line.

Rauscher, Christen (Alexandria, VA)

1990-01-01T23:59:59.000Z

53

Demultiplexer circuit for neural stimulation  

DOE Patents (OSTI)

A demultiplexer circuit is disclosed which can be used with a conventional neural stimulator to extend the number of electrodes which can be activated. The demultiplexer circuit, which is formed on a semiconductor substrate containing a power supply that provides all the dc electrical power for operation of the circuit, includes digital latches that receive and store addressing information from the neural stimulator one bit at a time. This addressing information is used to program one or more 1:2.sup.N demultiplexers in the demultiplexer circuit which then route neural stimulation signals from the neural stimulator to an electrode array which is connected to the outputs of the 1:2.sup.N demultiplexer. The demultiplexer circuit allows the number of individual electrodes in the electrode array to be increased by a factor of 2.sup.N with N generally being in a range of 2-4.

Wessendorf, Kurt O; Okandan, Murat; Pearson, Sean

2012-10-09T23:59:59.000Z

54

Parallel VLSI Circuit Analysis and Optimization  

E-Print Network (OSTI)

CAD application addressed in this dissertation is the Simulation Program with Integrated Circuit Emphasis (SPICE) like circuit simulation. SPICE simulation is often regarded as the bottleneck of the design flow. Recently, parallel circuit simulation...

Ye, Xiaoji

2012-02-14T23:59:59.000Z

55

Superconductive tunnel junction integrated circuit  

SciTech Connect

Josephson Junction integrated circuits of the current injection type and magnetically controlled type utilize a superconductive layer that forms both Josephson Junction electrode for the Josephson Junction devices on the integrated circuit as well as a ground plane for the integrated circuit. Large area Josephson Junctions are utilized for effecting contact to lower superconductive layers and islands are formed in superconductive layers to provide isolation between the groundplane function and the Josephson Junction electrode function as well as to effect crossovers. A superconductor-barrier-superconductor trilayer patterned by local anodization is also utilized with additional layers formed thereover. Methods of manufacturing the embodiments of the invention are disclosed.

Jillie, D.W. Jr.; Smith, L.N.

1984-02-07T23:59:59.000Z

56

Reverse engineering of integrated circuits  

DOE Patents (OSTI)

Software and a method therein to analyze circuits. The software comprises several tools, each of which perform particular functions in the Reverse Engineering process. The analyst, through a standard interface, directs each tool to the portion of the task to which it is most well suited, rendering previously intractable problems solvable. The tools are generally used iteratively to produce a successively more abstract picture of a circuit, about which incomplete a priori knowledge exists.

Chisholm, Gregory H. (Shorewood, IL); Eckmann, Steven T. (Colorado Springs, CO); Lain, Christopher M. (Pittsburgh, PA); Veroff, Robert L. (Albuquerque, NM)

2003-01-01T23:59:59.000Z

57

Vertically Integrated Circuits at Fermilab  

SciTech Connect

The exploration of the vertically integrated circuits, also commonly known as 3D-IC technology, for applications in radiation detection started at Fermilab in 2006. This paper examines the opportunities that vertical integration offers by looking at various 3D designs that have been completed by Fermilab. The emphasis is on opportunities that are presented by through silicon vias (TSV), wafer and circuit thinning and finally fusion bonding techniques to replace conventional bump bonding. Early work by Fermilab has led to an international consortium for the development of 3D-IC circuits for High Energy Physics. The consortium has submitted over 25 different designs for the Fermilab organized MPW run organized for the first time.

Deptuch, Grzegorz; Demarteau, Marcel; Hoff, James; Lipton, Ronald; Shenai, Alpana; Trimpl, Marcel; Yarema, Raymond; Zimmerman, Tom; /Fermilab

2009-01-01T23:59:59.000Z

58

Nuclear sensor signal processing circuit  

DOE Patents (OSTI)

An apparatus and method are disclosed for a compact and temperature-insensitive nuclear sensor that can be calibrated with a non-hazardous radioactive sample. The nuclear sensor includes a gamma ray sensor that generates tail pulses from radioactive samples. An analog conditioning circuit conditions the tail-pulse signals from the gamma ray sensor, and a tail-pulse simulator circuit generates a plurality of simulated tail-pulse signals. A computer system processes the tail pulses from the gamma ray sensor and the simulated tail pulses from the tail-pulse simulator circuit. The nuclear sensor is calibrated under the control of the computer. The offset is adjusted using the simulated tail pulses. Since the offset is set to zero or near zero, the sensor gain can be adjusted with a non-hazardous radioactive source such as, for example, naturally occurring radiation and potassium chloride.

Kallenbach, Gene A. (Bosque Farms, NM); Noda, Frank T. (Albuquerque, NM); Mitchell, Dean J. (Tijeras, NM); Etzkin, Joshua L. (Albuquerque, NM)

2007-02-20T23:59:59.000Z

59

Vertical Circuits Inc | Open Energy Information  

Open Energy Info (EERE)

Circuits Inc Circuits Inc Jump to: navigation, search Name Vertical Circuits, Inc. Place Scotts Valley, California Zip 95066 Sector Services Product Vertical Circuits Inc. is a global supplier of advanced die level vertical interconnect packaging technology, products, services and intellectual property for the manufacture of low cost ultra high-speed/high-density semiconductor components. References Vertical Circuits, Inc.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Vertical Circuits, Inc. is a company located in Scotts Valley, California . References ↑ "Vertical Circuits, Inc." Retrieved from "http://en.openei.org/w/index.php?title=Vertical_Circuits_Inc&oldid=352802"

60

Circuit Optimization Using Efficient Parallel Pattern Search  

E-Print Network (OSTI)

Circuit optimization is extremely important in order to design today's high performance integrated circuits. As systems become more and more complex, traditional optimization techniques are no longer viable due to the complex and simulation...

Narasimhan, Srinath S.

2011-08-08T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

An ammonia refrigerator with an absorption circuit as economizer  

Science Journals Connector (OSTI)

The experimental results of a compression refrigerator with an integrated solution circuit, a so-called compression-absorption cycle, are presented. The compression refrigerator operates with ammonia (NH3) as refrigerant. The cycle is improved by two-stage throttling of the condensate and an absorption circuit which replaces the economizer compressor. The absorption circuit operates on the working pair ammonia/water (NH3/H2O). It is driven by superheat of the compressor without additional heat input from an external source. By this means the benefit of two-stage throttling, namely a reduction in compression work or an increase in refrigeration capacity, can be doubled. In the experiments an improvement of up to 9% in the efficiency of the NH3-refrigeration cycle has been attained. Compared to a simple compression refrigerator, the presented compression-absorption cycle has a payback time of only several months. Compared to a conventional economizer refrigeration cycle, the payback can be expected within the range of several months to about four years.

F Ziegler; U Spindler

1993-01-01T23:59:59.000Z

62

DNA Hybridization Catalysts and Catalyst Circuits  

E-Print Network (OSTI)

blocks for a synthetic DNA-based circuit. While ri- bozymes are the best known example of nucleic acids

Winfree, Erik

63

SYSTEMATIC SYNTHESIS METHOD FOR ANALOGUE CIRCUITS PART III ALL-TRANSISTOR CIRCUIT SYNTHESIS  

E-Print Network (OSTI)

SYSTEMATIC SYNTHESIS METHOD FOR ANALOGUE CIRCUITS ­ PART III ALL-TRANSISTOR CIRCUIT SYNTHESIS David papers (subtitled Parts I and II) together present a systematic synthesis method for analogue circuits. This paper illustrates the synthesis method by deriving and analysing some known all- transistor circuits

Papavassiliou, Christos

64

Improved Simulation of Stabilizer Circuits Scott Aaronson #  

E-Print Network (OSTI)

Improved Simulation of Stabilizer Circuits Scott Aaronson # University of California, Berkeley---that is, a quantum circuit con­ sisting solely of CNOT, Hadamard, and phase gates---can be simulated e that stabilizer circuits are probably not even universal for classical computation. Third, we give e

Aaronson, Scott

65

Integrated Circuit / Microfluidic Chips for Dielectric Manipulation  

E-Print Network (OSTI)

Integrated Circuit / Microfluidic Chips for Dielectric Manipulation A THESIS PRESENTED BY THOMAS by Thomas Hunt All rights reserved. #12;iii Abstract Integrated Circuit / Microfluidic Chips for Dielectric of integrated circuit / microfluidic chips to move individual living cells and chemical droplets along

Heller, Eric

66

Voltage, energy and power in electric circuits  

E-Print Network (OSTI)

Voltage, energy and power in electric circuits Science teaching unit #12;Disclaimer The Department-2008DVD-EN Voltage, energy and power in electric circuits #12;#12;© Crown copyright 2008 1The National Strategies | Secondary Voltage, energy and power in electric circuits 00094-2008DVD-EN Contents Voltage

Berzins, M.

67

The Ideal Transformer Description and Circuit Symbol  

E-Print Network (OSTI)

The Ideal Transformer Description and Circuit Symbol As with all the other circuit elements, there is a physical transformer commonly used in circuits whose behavior can be discussed in great detail. However, in many cases the practical transformer can be adequately approximated by the "ideal transformer," which

King, Roger

68

Neutrinoless Double $?$-Decay  

E-Print Network (OSTI)

The neutrinoless double $\\beta$-decay is reviewed. Model independent evidence in favor of neutrino masses and mixing is briefly summarized. The data of the recent experiments on the search for $0\

S. M. Bilenky

2004-03-23T23:59:59.000Z

69

Design of bulk thermoelectric modules for integrated circuit thermal management  

E-Print Network (OSTI)

Index TermsContact resistance, equivalent circuit models,1-D equivalent circuit model. When the thermal resistance

Fukutani, K; Shakouri, A

2006-01-01T23:59:59.000Z

70

Double Beta Decay  

E-Print Network (OSTI)

The motivation, present status, and future plans of the search for the neutrinoless double beta decay are reviewed. It is argued that, motivated by the recent observations of neutrino oscillations, there is a reasonable hope that neutrinoless double beta decay corresponding to the neutrino mass scale suggested by oscillations, of about 50 meV, actually exists. The challenges to achieve the sensitivity corresponding to this mass scale, and plans to overcome them, are described.

Steven R. Elliott; Petr Vogel

2002-02-27T23:59:59.000Z

71

Ionization tube simmer current circuit  

DOE Patents (OSTI)

A highly efficient flash lamp simmer current circuit utilizes a fifty percent duty cycle square wave pulse generator to pass a current over a current limiting inductor to a full wave rectifier. The DC output of the rectifier is then passed over a voltage smoothing capacitor through a reverse current blocking diode to a flash lamp tube to sustain ionization in the tube between discharges via a small simmer current. An alternate embodiment of the circuit combines the pulse generator and inductor in the form of an FET off line square wave generator with an impedance limited step up output transformer which is then applied to the full wave rectifier as before to yield a similar simmer current.

Steinkraus, Jr., Robert F. (Livermore, CA)

1994-01-01T23:59:59.000Z

72

Ionization tube simmer current circuit  

DOE Patents (OSTI)

A highly efficient flash lamp simmer current circuit utilizes a fifty percent duty cycle square wave pulse generator to pass a current over a current limiting inductor to a full wave rectifier. The DC output of the rectifier is then passed over a voltage smoothing capacitor through a reverse current blocking diode to a flash lamp tube to sustain ionization in the tube between discharges via a small simmer current. An alternate embodiment of the circuit combines the pulse generator and inductor in the form of an FET off line square wave generator with an impedance limited step up output transformer which is then applied to the full wave rectifier as before to yield a similar simmer current. 6 figures.

Steinkraus, R.F. Jr.

1994-12-13T23:59:59.000Z

73

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

74

Photoconductive circuit element pulse generator  

DOE Patents (OSTI)

A pulse generator for characterizing semiconductor devices at millimeter wavelength frequencies where a photoconductive circuit element (PCE) is biased by a direct current voltage source and produces short electrical pulses when excited into conductance by short laser light pulses. The electrical pulses are electronically conditioned to improve the frequency related amplitude characteristics of the pulses which thereafter propagate along a transmission line to a device under test.

Rauscher, Christen (Alexandria, VA)

1989-01-01T23:59:59.000Z

75

Frequency-doubling in femtosecond laser inscribed periodically-poled potassium titanyl  

E-Print Network (OSTI)

, Sweden *Corresponding author: d.t.reid@hw.ac.uk Abstract: Frequency doubling has been achieved and M. Pierrou, " High power blue light generation in segmented KTiOPO4 waveguides," 8th European waveguides written with a femtosecond laser for flexible interconnection in a planar light-wave circuit," Opt

76

Circuit considerations for repetitive railguns  

SciTech Connect

Railgun electromagnetic launchers have significant military and scientific potential. They provide direct conversion of electrical energy to projectile kinetic energy, and they offer the hope of achieving projectile velocities greatly exceeding the limits of conventional guns. With over 10 km/sec already demonstrated, railguns are attracting attention for tactical and strategic weapons systems and for scientific equation-of-state research. The full utilization of railguns will require significant improvements in every aspect of system design - projectile, barrel, and power source - to achieve operation on a large scale. This paper will review fundamental aspects of railguns, with emphasis on circuit considerations and repetitive operation.

Honih, E.M.

1986-01-01T23:59:59.000Z

77

Polysilicon photoconductor for integrated circuits  

DOE Patents (OSTI)

A photoconductive element of polycrystalline silicon is provided with intrinsic response time which does not limit overall circuit response. An undoped polycrystalline silicon layer is deposited by LPCVD to a selected thickness on silicon dioxide. The deposited polycrystalline silicon is then annealed at a selected temperature and for a time effective to obtain crystal sizes effective to produce an enhanced current output. The annealed polycrystalline layer is subsequently exposed and damaged by ion implantation to a damage factor effective to obtain a fast photoconductive response. 6 figs.

Hammond, R.B.; Bowman, D.R.

1989-04-11T23:59:59.000Z

78

Printed circuit dispersive transmission line  

DOE Patents (OSTI)

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

1991-08-27T23:59:59.000Z

79

Printed circuit dispersive transmission line  

DOE Patents (OSTI)

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

Ikezi, Hiroyuki (Rancho Santa Fe, CA); Lin-Liu, Yuh-Ren (San Diego, CA); DeGrassie, John S. (Encinitas, CA)

1991-01-01T23:59:59.000Z

80

Double-Skin Faades  

Science Journals Connector (OSTI)

The double-skin faade is a system that consists of two building skins separated by a ventilated cavity (Fig. 9.1). The main aim of the cavity is to vary the physical properties of the faade throughout the ye...

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

DOUBLE MAJORS Imaging Science + ...  

E-Print Network (OSTI)

DOUBLE MAJORS Imaging Science + ... Applied Mathematics Biomedical Sciences Computer Science Undergraduate Research Internships and Cooperative Education (Co-op) (optional) Study Abroad WHY IMAGING SCIENCE Science: BS, MS, PhD Color Science: MS, PhD BS + MS/PhD Combos HUMAN VISION BIO- MEDICAL ASTRO- PHYSICS

Zanibbi, Richard

82

Circuit reconstruction tools today Stephen J Smith  

E-Print Network (OSTI)

Circuit reconstruction tools today Stephen J Smith To understand how a brain processes information, Stanford University School of Medicine, Stanford, CA 94305, United States Corresponding author: Smith

Born, Richard

83

WHY SEARCH FOR DOUBLE BETA DECAY?  

E-Print Network (OSTI)

the search for neutrinoless double beta decay may prove verySearching for neutrinoless double beta decay is the onlysensitivity of neutrinoless double beta decay. The potential

Kayser, B.

2010-01-01T23:59:59.000Z

84

Double Flash | Open Energy Information  

Open Energy Info (EERE)

Flash Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleDoubleFlash&oldid599606"...

85

Domain walls and double bubbles  

Science Journals Connector (OSTI)

...5, which are never double bubbles, that is, none is the global...transverse cylinder, torus bubble, inner tube and double hydrant...transverse cylinder and the stability of the cylinder cross. The...three-dimensional double bubbles and show that the method can...

2009-01-01T23:59:59.000Z

86

Circuit breaker monitoring application using wireless communication  

E-Print Network (OSTI)

Circuit breakers are used in the power system to break or make current flow through power apparatus. Reliable operation of circuit breakers is critical to the well- being of the power system and can be achieved by regular inspection and maintenance...

Ved, Nitin

2007-04-25T23:59:59.000Z

87

A Spatial Computing Architecture Implementing Computation Circuits  

E-Print Network (OSTI)

A Spatial Computing Architecture for Implementing Computation Circuits David Grant Supervisor: Dr Architecture Tools Preliminary Results Conclusions #12;3 Introduction Computational Circuits Software MB of memory ­ Add a few million gates ??? #12;5 Architecture and Tools to implement computational

Lemieux, Guy

88

www.plusplasticelectronics.com THE CIRCUIT  

E-Print Network (OSTI)

www.plusplasticelectronics.com THE CIRCUIT + SMART FABRICS 2011 + SMART TEXTILES SALON watch NANOMATERIALS IN PRINTED ELECTRONICS The circuit SMART FABRICS 2011 SMART TEXTILES SALON in Physics in 2010 for their discovery of graphene, an ultra-thin carbon material with extraordinary

Aksay, Ilhan A.

89

Deutsch Algorithm on Classical Circuits  

E-Print Network (OSTI)

The well-known Deutsch Algorithm (DA) and Deutsch-Jozsha Algorithm (DJA) both are used as an evidence to the power of quantum computers over classical computation mediums. In these theoretical experiments, it has been shown that a quantum computer can find the answer with certainty within a few steps although classical electronic systems must evaluate more iterations than quantum computer. In this paper, it is shown that a classical computation system formed by using ordinary electronic parts may perform the same task with equal performance than quantum computers. DA and DJA quantum circuits act like an analog computer, so it is unfair to compare the bit of classical digital computers with the qubit of quantum computers. An analog signal carrying wire will of course carry more information that a bit carrying wire without serial communication protocols.

Osman Kaan Erol

2008-03-21T23:59:59.000Z

90

Sequential power-up circuit  

DOE Patents (OSTI)

A sequential power-up circuit for starting several electrical load elements in series to avoid excessive current surge, comprising a voltage ramp generator and a set of voltage comparators, each comparator having a different reference voltage and interfacing with a switch that is capable of turning on one of the load elements. As the voltage rises, it passes the reference voltages one at a time and causes the switch corresponding to that voltage to turn on its load element. The ramp is turned on and off by a single switch or by a logic-level electrical signal. The ramp rate for turning on the load element is relatively slow and the rate for turning the elements off is relatively fast. Optionally, the duration of each interval of time between the turning on of the load elements is programmable. 2 figs.

Kronberg, J.W.

1992-06-02T23:59:59.000Z

91

Reusable vibration resistant integrated circuit mounting socket  

DOE Patents (OSTI)

This invention discloses a novel form of socket for integrated circuits to be mounted on printed circuit boards. The socket uses a novel contact which is fabricated out of a bimetallic strip with a shape which makes the end of the strip move laterally as temperature changes. The end of the strip forms a barb which digs into an integrated circuit lead at normal temperatures and holds it firmly in the contact, preventing loosening and open circuits from vibration. By cooling the contact containing the bimetallic strip the barb end can be made to release so that the integrated circuit lead can be removed from the socket without damage either to the lead or to the socket components.

Evans, Craig N. (Irwin, PA)

1995-01-01T23:59:59.000Z

92

Low voltage amplifier architecture for high speed switched capacitor circuits  

E-Print Network (OSTI)

This work concentrates on circuit realization of high speed and low voltage switched capacitor circuits, with emphasis on the operational transconductance amplifier (OTA). An overview of switched capacitor circuits is given. Speed and voltage...

Shankar, Asit

2012-06-07T23:59:59.000Z

93

Anatomy and physiology of neurons supporting the cerebellar circuit  

E-Print Network (OSTI)

firing patterns lead to some interesting questions about the circuitand circuit connections. Do membrane and firing propertiesfiring rate. Another important area of cerebellum circuit

Champion, Kristine Elizabeth

2011-01-01T23:59:59.000Z

94

High Temperature, High Voltage Fully Integrated Gate Driver Circuit  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

driver circuit, 5-V on- chip voltage regulator, short-circuit protection, undervoltage lockout, bootstrap capacitor, dead time controller and temperature sensor * 0.8-micron,...

95

Digital Circuits Spring 2008--Course 0156-244-001  

E-Print Network (OSTI)

: · Introduction to Logic and Binary Systems Number systems, corresponding math, & codes (BCD, grey codes, etc programmable architectures VHDL (code for converting circuit design into working programmable circuit

Bentley, Sean

96

Equivalent circuits and efficiencies of fuel cells  

Science Journals Connector (OSTI)

By introducing an equivalent thermal potential fixed in terms of the heat of reaction, a thermodynamic equivalent circuit is determined for a fuel cell which yields the correct current-potential curve of the cell for low current by formal application of Ohm's law. The thermodynamic power balance and the thermodynamic efficiency also are given correctly. A linear electrical equivalent circuit is constructed which represents closely the electrical performance of the cell over a wide range of current (not approaching zero). The effect of polarization processes on the electrical power and efficiency is taken into account through a single constant parameter. Introduction of the equivalent thermal potential into the circuit yields a thermodynamic equivalent circuit whose output computed by formal use of Ohm's law coincides exactly with that given by the electrical equivalent circuit. The correct electrical properties, thermodynamic power balance, and thermodynamic efficiency follow directly from the circuit. A general theorem is formulated, independently of the validity of an equivalent circuit, connecting the thermodynamic and electrical efficiencies of a fuel cell. Confirmatory experimental results based on hydrogenoxygen cells are presented, which underline the large reduction in available power brought about by polarization processes and entropy changes in a fuel cell.

J.J. Gilvarry; J.I. Slaughtert

1963-01-01T23:59:59.000Z

97

Method of manufacturing Josephson junction integrated circuits  

SciTech Connect

Josephson junction integrated circuits of the current injection type and magnetically controlled type utilize a superconductive layer that forms both Josephson junction electrode for the Josephson junction devices on the integrated circuit as well as a ground plane for the integrated circuit. Large area Josephson junctions are utilized for effecting contact to lower superconductive layers and islands are formed in superconductive layers to provide isolation between the groudplane function and the Josephson junction electrode function as well as to effect crossovers. A superconductor-barrier-superconductor trilayer patterned by local anodization is also utilized with additional layers formed thereover. Methods of manufacturing the embodiments of the invention are disclosed.

Jillie Jr., D. W.; Smith, L. N.

1985-02-12T23:59:59.000Z

98

Quantum computation beyond the circuit model  

E-Print Network (OSTI)

The quantum circuit model is the most widely used model of quantum computation. It provides both a framework for formulating quantum algorithms and an architecture for the physical construction of quantum computers. However, ...

Jordan, Stephen Paul

2008-01-01T23:59:59.000Z

99

B : Bayesian Circuit Analysis by Michel Wilson  

E-Print Network (OSTI)

://ftp.arl.army.mil/~mike/comphist. #12;B : Bayesian Circuit Analysis by Topology Author: Michel Wilson Student id: Email: michel obtained. esis Committee: Chair: Prof. Dr. Ir. A.J.C. van Gemund, Faculty EEMCS, TU Del University

Kuzmanov, Georgi

100

Yield learning model for integrated circuit package  

E-Print Network (OSTI)

, and has a major influence on product perfo rmance and reliability. Increasing the yield in package assembly influence on product perfo will reduce the effective manufacturing cost during assembly. Hence integrated circuit manufacturers try to improve...

Balasubramaniam, Gaurishankar

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Microelectronic Devices and Circuits - 2006 Electronic Edition  

E-Print Network (OSTI)

Combining semiconductor device physics and modeling with electronic circuit analysis and practice in a single sophomore/junior level microelectronics course, this textbook offers an integrated approach so students can truly ...

Fonstad, Clifton

2006-10-01T23:59:59.000Z

102

Parameterized modeling of multiport passive circuit blocks  

E-Print Network (OSTI)

System level design optimization has recently started drawing the attention of circuit designers. A system level optimizer would search over the entire design space, adjusting the parameters of interest, for optimal ...

Mahmood, Zohaib

2010-01-01T23:59:59.000Z

103

Carbon nanotube synthesis for integrated circuit interconnects  

E-Print Network (OSTI)

Based on their properties, carbon nanotubes (CNTs) have been identified as ideal replacements for copper interconnects in integrated circuits given their higher current density, inertness, and higher resistance to ...

Nessim, Gilbert Daniel

2009-01-01T23:59:59.000Z

104

Analysis of S-Circuit Uncertainty  

E-Print Network (OSTI)

The theory of sensori-computational circuits provides a capable framework for the description and optimization of robotic systems, including on-line optimizations. This theory, however, is inadequate in that it does not account for uncertainty in a...

Ahmed, Taahir

2011-08-08T23:59:59.000Z

105

Analysis and Design of Resilient VLSI Circuits  

E-Print Network (OSTI)

and design techniques with the goal of realizing VLSI circuits which are tolerant to radiation particle strikes and process variations. This dissertation consists of two parts. The first part proposes four analysis and two design approaches to address...

Garg, Rajesh

2010-07-14T23:59:59.000Z

106

Analog circuit for controlling acoustic transducer arrays  

DOE Patents (OSTI)

A simplified ananlog circuit is presented for controlling electromechanical transducer pairs in an acoustic telemetry system. The analog circuit of this invention comprises a single electrical resistor which replaces all of the digital components in a known digital circuit. In accordance with this invention, a first transducer in a transducer pair of array is driven in series with the resistor. The voltage drop across this resistor is then amplified and used to drive the second transducer. The voltage drop across the resistor is proportional and in phase with the current to the transducer. This current is approximately 90 degrees out of phase with the driving voltage to the transducer. This phase shift replaces the digital delay required by the digital control circuit of the prior art.

Drumheller, Douglas S. (Cedar Crest, NM)

1991-01-01T23:59:59.000Z

107

Equivalent Circuit Modeling of Hysteresis Motors  

SciTech Connect

We performed a literature review and found that many equivalent circuit models of hysteresis motors in use today are incorrect. The model by Miyairi and Kataoka (1965) is the correct one. We extended the model by transforming it to quadrature coordinates, amenable to circuit or digital simulation. 'Hunting' is an oscillatory phenomenon often observed in hysteresis motors. While several works have attempted to model the phenomenon with some partial success, we present a new complete model that predicts hunting from first principles.

Nitao, J J; Scharlemann, E T; Kirkendall, B A

2009-08-31T23:59:59.000Z

108

Investigation of dielectric overlay microstrip circuits  

E-Print Network (OSTI)

INVESTIGATION OF DIELECTRIC OVERLAY MICROSTRIP CIRCUITS A Thesis by JAMES LOUIS KLEIN Submitted to the Graduate College of Texas ARM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1988 Major... Subject: Electrical Engineering INVESTIGATION OF DIELECTRIC OVERLAY MICRO STRIP CIRCUITS A Thesis by JAMES LOUIS KLEIN Approved as to style and content by: Kai Chang Robert D. Nevels (Member) Krzysztof A. Michalski (Member) Mark H. Weichold...

Klein, James Louis

1988-01-01T23:59:59.000Z

109

Triple-effect absorption refrigeration system with double-condenser coupling  

DOE Patents (OSTI)

A triple effect absorption refrigeration system is provided with a double-condenser coupling and a parallel or series circuit for feeding the refrigerant-containing absorbent solution through the high, medium, and low temperature generators utilized in the triple-effect system. The high temperature condenser receiving vaporous refrigerant from the high temperature generator is double coupled to both the medium temperature generator and the low temperature generator to enhance the internal recovery of heat within the system and thereby increase the thermal efficiency thereof.

DeVault, R.C.; Biermann, W.J.

1993-04-27T23:59:59.000Z

110

IEEE Communications Magazine February 20022 Distributed Integrated Circuits  

E-Print Network (OSTI)

Approach to High-Frequency Design 0163-6804/02/$17.00 © 2002 IEEE ABSTRACT Distributed integrated circuits are presented as a methodology to design high-frequency commu- nication building blocks. Distributed circuits be implemented as integrated circuits. The integrated circuit design process is then divided further by defining

Hajimiri, Ali

111

Differential transimpedance amplifier circuit for correlated differential amplification  

DOE Patents (OSTI)

A differential transimpedance amplifier circuit for correlated differential amplification. The amplifier circuit increase electronic signal-to-noise ratios in charge detection circuits designed for the detection of very small quantities of electrical charge and/or very weak electromagnetic waves. A differential, integrating capacitive transimpedance amplifier integrated circuit comprising capacitor feedback loops performs time-correlated subtraction of noise.

Gresham, Christopher A. (Albuquerque, NM); Denton, M. Bonner (Tucson, AZ); Sperline, Roger P. (Tucson, AZ)

2008-07-22T23:59:59.000Z

112

Parallel algorithm strategies for circuit simulation.  

SciTech Connect

Circuit simulation tools (e.g., SPICE) have become invaluable in the development and design of electronic circuits. However, they have been pushed to their performance limits in addressing circuit design challenges that come from the technology drivers of smaller feature scales and higher integration. Improving the performance of circuit simulation tools through exploiting new opportunities in widely-available multi-processor architectures is a logical next step. Unfortunately, not all traditional simulation applications are inherently parallel, and quickly adapting mature application codes (even codes designed to parallel applications) to new parallel paradigms can be prohibitively difficult. In general, performance is influenced by many choices: hardware platform, runtime environment, languages and compilers used, algorithm choice and implementation, and more. In this complicated environment, the use of mini-applications small self-contained proxies for real applications is an excellent approach for rapidly exploring the parameter space of all these choices. In this report we present a multi-core performance study of Xyce, a transistor-level circuit simulation tool, and describe the future development of a mini-application for circuit simulation.

Thornquist, Heidi K.; Schiek, Richard Louis; Keiter, Eric Richard

2010-01-01T23:59:59.000Z

113

Neutrinoless Double Phys 135c Spring 2007  

E-Print Network (OSTI)

Neutrinoless Double Beta Decay Phys 135c Spring 2007 Michael Mendenhall #12;Theory Overview #12 beta decays #12;neutrinoless double beta decays n e- p beta decay e #12;neutrinoless double beta decays n e- p beta decay e n e- p n e- p double beta decay e e #12;neutrinoless double beta decays n e- p

Golwala, Sunil

114

Lazzaro and Mead --Circuit Models of Sensory Transduction in the Cochlea CIRCUIT MODELS OF SENSORY TRANSDUCTION  

E-Print Network (OSTI)

Lazzaro and Mead -- Circuit Models of Sensory Transduction in the Cochlea CIRCUIT MODELS OF SENSORY nerve. Humans can process sound input over a 120-dB dynamic range, yet the firing rate of an auditory of the order of ten microseconds, yet an auditory-nerve fiber can fire at most once per mil- lisecond. Using

Lazzaro, John

115

Silicon-on-insulator-based high-voltage, high-temperature integrated circuit gate driver for silicon carbide-based power field effect transistors  

SciTech Connect

Silicon carbide (SiC)-based field effect transistors (FETs) are gaining popularity as switching elements in power electronic circuits designed for high-temperature environments like hybrid electric vehicle, aircraft, well logging, geothermal power generation etc. Like any other power switches, SiC-based power devices also need gate driver circuits to interface them with the logic units. The placement of the gate driver circuit next to the power switch is optimal for minimising system complexity. Successful operation of the gate driver circuit in a harsh environment, especially with minimal or no heat sink and without liquid cooling, can increase the power-to-volume ratio as well as the power-to-weight ratio for power conversion modules such as a DC-DC converter, inverter etc. A silicon-on-insulator (SOI)-based high-voltage, high-temperature integrated circuit (IC) gate driver for SiC power FETs has been designed and fabricated using a commercially available 0.8--m, 2-poly and 3-metal bipolar-complementary metal oxide semiconductor (CMOS)-double diffused metal oxide semiconductor (DMOS) process. The prototype circuit-s maximum gate drive supply can be 40-V with peak 2.3-A sourcing/sinking current driving capability. Owing to the wide driving range, this gate driver IC can be used to drive a wide variety of SiC FET switches (both normally OFF metal oxide semiconductor field effect transistor (MOSFET) and normally ON junction field effect transistor (JFET)). The switching frequency is 20-kHz and the duty cycle can be varied from 0 to 100-. The circuit has been successfully tested with SiC power MOSFETs and JFETs without any heat sink and cooling mechanism. During these tests, SiC switches were kept at room temperature and ambient temperature of the driver circuit was increased to 200-C. The circuit underwent numerous temperature cycles with negligible performance degradation.

Tolbert, Leon M [ORNL; Huque, Mohammad A [ORNL; Blalock, Benjamin J [ORNL; Islam, Syed K [ORNL

2010-01-01T23:59:59.000Z

116

The Monoclinic Double Sulphates Containing Ammonium. Completion of the Double Sulphate Series  

Science Journals Connector (OSTI)

...Double Sulphates Containing Ammonium. Completion of the Double Sulphate Series A. E...properties physical properties refractive index sulfates GeoRef, Copyright 2007, American...double sulphates containing ammonium; completion of the double sulphate series Tutton...

1916-01-01T23:59:59.000Z

117

Lockout device for high voltage circuit breaker  

SciTech Connect

An improved lockout assembly is provided for a circuit breaker to lock the switch handle into a selected switch position. The lockout assembly includes two main elements, each having a respective foot for engaging a portion of the upper housing wall of the circuit breaker. The first foot is inserted into a groove in the upper housing wall, and the second foot is inserted into an adjacent aperture (e.g., a slot) in the upper housing wall. The first foot is slid under and into engagement with a first portion, and the second foot is slid under and into engagement with a second portion of the upper housing wall. At the same time the respective two feet are placed in engagement with the respective portions of the upper housing wall, two holes, one on each of the respective two main elements of the assembly, are placed in registration; and a locking device, such as a special scissors equipped with a padlock, is installed through the registered holes to secure the lockout assembly on the circuit breaker. When the lockout assembly of the invention is secured on the circuit breaker, the switch handle of the circuit breaker is locked into the selected switch position and prevented from being switched to another switch position.

Kozlowski, L.J.; Shirey, L.A.

1993-01-26T23:59:59.000Z

118

Lockout device for high voltage circuit breaker  

DOE Patents (OSTI)

An improved lockout assembly is provided for a circuit breaker to lock the switch handle into a selected switch position. The lockout assembly includes two main elements, each having a respective foot for engaging a portion of the upper housing wall of the circuit breaker. The first foot is inserted into a groove in the upper housing wall, and the second foot is inserted into an adjacent aperture (e.g., a slot) in the upper housing wall. The first foot is slid under and into engagement with a first portion, and the second foot is slid under and into engagement with a second portion of the upper housing wall. At the same time the repsective two feet are placed in engagement with the respective portions of the upper housing wall, two holes, one on each of the respective two main elements of the assembly, are placed in registration; and a locking device, such as a special scissors equipped with a padlock, is installed through the registered holes to secure the lockout assembly on the circuit breaker. When the lockout assembly of the invention is secured on the circuit breaker, the switch handle of the circuit breaker is locked into the selected switch position and prevented from being switched to another switch position.

Kozlowski, Lawrence J. (New Kensington, PA); Shirey, Lawrence A. (North Huntingdon, PA)

1993-01-01T23:59:59.000Z

119

Lookout device for high voltage circuit breaker  

SciTech Connect

An improved lockout assembly is provided for a circuit breaker to lock the switch handle into a selected switch position. The lockout assembly includes two main elements, each having a respective foot for engaging a portion of the upper housing wall of the circuit breaker. The first foot is inserted into a groove in the upper housing wall, and the second foot is inserted into an adjacent aperture (e.g., a slot) in the upper housing wall. The first foot is slid under and into engagement with a first portion, and the second foot is slid under and into engagement with a second portion of the upper housing wall. At the same time the respective two feet are placed in engagement with the respective portions of the upper housing wall, two holes, one on each of the respective two main elements of the assembly, are placed in registration; and a locking device, such as a special scissors equipped with a padlock, is installed through the registered holes to secure the lockout assembly on the circuit breaker. When the lockout assembly of the invention is secured on the circuit breaker, the switch handle of the circuit breaker is locked into the selected switch position and prevented from being switched to another switch position.

Kozlowski, L.J.; Shirey, L.A.

1991-12-31T23:59:59.000Z

120

Dual circuit embossed sheet heat transfer panel  

DOE Patents (OSTI)

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet. 6 figs.

Morgan, G.D.

1984-02-21T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Double acting bit holder  

DOE Patents (OSTI)

A double acting bit holder that permits bits held in it to be resharpened during cutting action to increase energy efficiency by reducing the amount of small chips produced. The holder consist of: a stationary base portion capable of being fixed to a cutter head of an excavation machine and having an integral extension therefrom with a bore hole therethrough to accommodate a pin shaft; a movable portion coextensive with the base having a pin shaft integrally extending therefrom that is insertable in the bore hole of the base member to permit the moveable portion to rotate about the axis of the pin shaft; a recess in the movable portion of the holder to accommodate a shank of a bit; and a biased spring disposed in adjoining openings in the base and moveable portions of the holder to permit the moveable portion to pivot around the pin shaft during cutting action of a bit fixed in a turret to allow front, mid and back positions of the bit during cutting to lessen creation of small chip amounts and resharpen the bit during excavation use.

Morrell, Roger J. (Blommington, MN); Larson, David A. (Minneapolis, MN); Ruzzi, Peter L. (Eagan, MN)

1994-01-01T23:59:59.000Z

122

Triple effect absorption chiller utilizing two refrigeration circuits  

SciTech Connect

This patent describes a heat absorption method for an absorption chiller. It comprises: providing a firs absorption system circuit for operation within a first temperature range, providing a second absorption system circuit for operation within a second temperature range; heat exchanging refrigerant and absorber solution; thermal communication with an external heat load. This patent describes a heat absorption apparatus for use as an absorption chiller. It includes: a first absorption system circuit for operation within a first temperature range; a second absorption system circuit for operation within a second temperature range which has a lower maximum temperature relative to the first temperature range; the first circuit having generator means, condenser means, evaporator means, and absorber means operatively connected together; the second circuit having generator means condenser means, evaporator means, and absorber means operative connected together; and the first circuit condenser means and the first circuit absorber means being in heat exchange communication with the second circuit generator means.

DeVault, R.C.

1988-03-22T23:59:59.000Z

123

Radiation-hardened transistor and integrated circuit  

DOE Patents (OSTI)

A composite transistor is disclosed for use in radiation hardening a CMOS IC formed on an SOI or bulk semiconductor substrate. The composite transistor has a circuit transistor and a blocking transistor connected in series with a common gate connection. A body terminal of the blocking transistor is connected only to a source terminal thereof, and to no other connection point. The blocking transistor acts to prevent a single-event transient (SET) occurring in the circuit transistor from being coupled outside the composite transistor. Similarly, when a SET occurs in the blocking transistor, the circuit transistor prevents the SET from being coupled outside the composite transistor. N-type and P-type composite transistors can be used for each and every transistor in the CMOS IC to radiation harden the IC, and can be used to form inverters and transmission gates which are the building blocks of CMOS ICs.

Ma, Kwok K. (Albuquerque, NM)

2007-11-20T23:59:59.000Z

124

Package for integrated optic circuit and method  

DOE Patents (OSTI)

A structure and method for packaging an integrated optic circuit. The package comprises a first wall having a plurality of microlenses formed therein to establish channels of optical communication with an integrated optic circuit within the package. A first registration pattern is provided on an inside surface of one of the walls of the package for alignment and attachment of the integrated optic circuit. The package in one embodiment may further comprise a fiber holder for aligning and attaching a plurality of optical fibers to the package and extending the channels of optical communication to the fibers outside the package. In another embodiment, a fiber holder may be used to hold the fibers and align the fibers to the package. The fiber holder may be detachably connected to the package.

Kravitz, Stanley H. (26 Aspen Rd., Placitas, NM 87043); Hadley, G. Ronald (6012 Annapolis NE., Albuquerque, NM 87111); Warren, Mial E. (3825 Mary Ellen NE., Albuquerque, NM 87111); Carson, Richard F. (1036 Jewel Pl. NE., Albuquerque, NM 87123); Armendariz, Marcelino G. (1023 Oro Real NE., Albuquerque, NM 87123)

1998-01-01T23:59:59.000Z

125

Circuits in the Sun: Solar Panel Physics  

Science Journals Connector (OSTI)

Typical commercial solar panels consist of approximately 60 individual photovoltaic cells connected in series. Since the usual Kirchhoff rules apply the current is uniform throughout the circuit while the electric potential of the individual devices is cumulative. Hence a solar panel is a good analog of a simple resistive series circuit except that the devices generate (rather than burn!) electrical power. For example in order to sustain the current flow each device must generate the requisite current. As a result the least efficient device limits the current throughout. Photovoltaic cells also have a more complicated current-voltage (IV) characteristic which determines the optimal load for power extraction. These considerations among others make the solar panel an excellent platform for exploring the physics of electric circuits.

Tim Gfroerer

2013-01-01T23:59:59.000Z

126

Package for integrated optic circuit and method  

DOE Patents (OSTI)

A structure and method are disclosed for packaging an integrated optic circuit. The package comprises a first wall having a plurality of microlenses formed therein to establish channels of optical communication with an integrated optic circuit within the package. A first registration pattern is provided on an inside surface of one of the walls of the package for alignment and attachment of the integrated optic circuit. The package in one embodiment may further comprise a fiber holder for aligning and attaching a plurality of optical fibers to the package and extending the channels of optical communication to the fibers outside the package. In another embodiment, a fiber holder may be used to hold the fibers and align the fibers to the package. The fiber holder may be detachably connected to the package. 6 figs.

Kravitz, S.H.; Hadley, G.R.; Warren, M.E.; Carson, R.F.; Armendariz, M.G.

1998-08-04T23:59:59.000Z

127

Triple effect absorption chiller utilizing two refrigeration circuits  

SciTech Connect

A heat absorption method for an absorption chiller is described comprising: (a) providing a first absorption system circuit for operation within a first temperature range; (b) providing a second absorption system circuit for operation within a second temperature range which has a lower maximum temperature than the first temperature range; (c) heat exchanging refrigerant and absorber solution from the first circuit condenser and absorber with absorption solution from the generator of the second circuit; and (d) the evaporator of the first circuit and the evaporator of the second circuit both being disposed in thermal communication with an external heat load to withdraw heat from the heat load.

De Vault, R.C.

1988-03-22T23:59:59.000Z

128

Hybrid high direct current circuit interrupter  

DOE Patents (OSTI)

A device and a method are disclosed for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens. 7 figs.

Rockot, J.H.; Mikesell, H.E.; Jha, K.N.

1998-08-11T23:59:59.000Z

129

Hybrid high direct current circuit interrupter  

DOE Patents (OSTI)

A device and a method for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens.

Rockot, Joseph H. (N. Huntingdon, PA); Mikesell, Harvey E. (McMurray, PA); Jha, Kamal N. (Bethel Park, PA)

1998-01-01T23:59:59.000Z

130

Quantum Electric Circuits Analogous to Ballistic Conductors  

E-Print Network (OSTI)

The conductance steps in a constricted two-dimensional electron gas and the minimum conductivity in graphene are related to a new uncertainty relation between electric charge and conductance in a quantized electric circuit that mimics the electric transport in mesoscopic systems. This uncertainty relation makes specific use of the discreteness of electric charge. Quantum electric circuits analogous to both constricted two-dimensional electron gas and graphene are introduced. In the latter case a new insight into the origin of minimum conductivity is obtained.

Daniela Dragoman

2007-11-28T23:59:59.000Z

131

Kirchhoff voltage law corrected for radiating circuits  

E-Print Network (OSTI)

When a circular loop composed by a RLC is put to oscillate, the oscillation will eventually vanish in an exponentially decaying current, even considering superconducting wires, due to the emission of electric and magnetic dipole radiation. In this work we propose a modification on the Kirchhoff voltage law by adding the radiative contributions to the energy loss as an effective resistance, whose value is relatively small when compared to typical resistance value, but fundamental to describe correctly real circuits. We have also analysed the change in the pattern of the radiation spectra emitted by the circuit as we vary both the effective and electrical resistance.

Lara, Vitor

2014-01-01T23:59:59.000Z

132

Neutrinoless Double Beta-Decay  

E-Print Network (OSTI)

The neutrinoless double $\\beta$-decay of nuclei is reviewed. We discuss neutrino mixing and 3x3 PMNS neutrino mixing matrix. Basic theory of neutrinoless double $\\beta$-decay is presented in some details. Results of different calculations of nuclear matrix element are discussed. Experimental situation is considered. The Appendix is dedicated to E. Majorana (brief biography and his paper in which the theory of Majorana particles is given)

S. M. Bilenky

2010-01-12T23:59:59.000Z

133

Quantum effects in nanoscale Josephson junction circuits  

E-Print Network (OSTI)

Quantum effects in nanoscale Josephson junction circuits SILVIA CORLEVI Doctoral Thesis Stockholm Josephson junction arrays with SQUID geometry. TRITA FYS 2006:31 ISSN 0280-316X ISRN KTH/FYS/­06:31­SE ISBN study on single-charge effects in nanoscale Josephson junctions and Cooper pair transistors (CPTs

Haviland, David

134

Simulating weak localization using superconducting quantum circuits  

E-Print Network (OSTI)

Understanding complex quantum matter presents a central challenge in condensed matter physics. The difficulty lies in the exponential scaling of the Hilbert space with the system size, making solutions intractable for both analytical and conventional numerical methods. As originally envisioned by Richard Feynman, this class of problems can be tackled using controllable quantum simulators. Despite many efforts, building an quantum emulator capable of solving generic quantum problems remains an outstanding challenge, as this involves controlling a large number of quantum elements. Here, employing a multi-element superconducting quantum circuit and manipulating a single microwave photon, we demonstrate that we can simulate the weak localization phenomenon observed in mesoscopic systems. By engineering the control sequence in our emulator circuit, we are also able to reproduce the well-known temperature dependence of weak localization. Furthermore, we can use our circuit to continuously tune the level of disorder, a parameter that is not readily accessible in mesoscopic systems. By demonstrating a high level of control and complexity, our experiment shows the potential for superconducting quantum circuits to realize scalable quantum simulators.

Yu Chen; P. Roushan; D. Sank; C. Neill; Erik Lucero; Matteo Mariantoni; R. Barends; B. Chiaro; J. Kelly; A. Megrant; J. Y. Mutus; P. J. J. O'Malley; A. Vainsencher; J. Wenner; T. C. White; Yi Yin; A. N. Cleland; John M. Martinis

2014-03-26T23:59:59.000Z

135

Automatic Stability Checking for Large Analog Circuits  

E-Print Network (OSTI)

breakpoints. However, this method suffers from extremely high time and memory complexity and thus cannot be scaled to very large analog circuits. In this research work, we first take an in-depth look at the loop finder algorithm so as to identify certain key...

Mukherjee, Parijat 1985-

2010-12-06T23:59:59.000Z

136

Computing with neural circuits: a model  

Science Journals Connector (OSTI)

...decision networks that used a system offeed-forward synap-tic connectivity and a simple...perceptron-like networks, which emphasized feed-forward connectivity. Graded-response neurons...A-B converter and TSP circuit, were-"forward-engineered." Given the optimization...

JJ Hopfield; DW Tank

1986-08-08T23:59:59.000Z

137

MODELING AND VISUALIZATION OF SYNTHETIC GENETIC CIRCUITS  

E-Print Network (OSTI)

. INTRODUCTION In 1977 a group of researchers managed to modify the DNA of the E. coli bacteria and were able to make it to produce the human hormone somatostatin [1]. Since that time genetic engineers have leveraged on Visualization of Genetic Circuits will give an overview on the use and effectiveness of the new visualization

Myers, Chris J.

138

Disentangling Mental Disorders : from Genes to Circuits  

E-Print Network (OSTI)

Summer Program 2014 Disentangling Mental Disorders : from Genes to Circuits RIKEN Brain Science Application : http://www.brain.riken.jp/en/summer/ Inquiries : info.summer@brain.riken.jp RIKEN Brain Science July 15-July 22, 2014 Summer Program 2014 Summer Program 2014 RIKEN Brain Science InstituteRIKEN Brain

Kazama, Hokto

139

CONCEPTS FOR TEACHING OPTOELECTRONIC CIRCUITS AND SYSTEMS  

E-Print Network (OSTI)

CONCEPTS FOR TEACHING OPTOELECTRONIC CIRCUITS AND SYSTEMS Smail TEDJINI, Benoit PANNETIER, Laurent.Lastname@esisar.inpg.fr Keywords : Optoelectronic devices, optical signals, communication systems, modeling, simulation, CAD and design of optical communication and optoelectronic systems is now necessary for the engineers

Boyer, Edmond

140

Three-dimensional Integrated Circuit Design  

Science Journals Connector (OSTI)

With vastly increased complexity and functionality in the "nanometer era" (i.e. hundreds of millions of transistors on one chip), increasing the performance of integrated circuits has become a challenging task. This is due primarily to the inevitable ... Keywords: Computer Architecture, Computer Engineering, Computer Science

Vasilis F. Pavlidis; Eby G. Friedman

2008-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Quantum computer of wire circuit architecture  

E-Print Network (OSTI)

First solid state quantum computer was built using transmons (cooper pair boxes). The operation of the computer is limited because of using a number of the rigit cooper boxes working with fixed frequency at temperatures of superconducting material. Here, we propose a novel architecture of quantum computer based on a flexible wire circuit of many coupled quantum nodes containing controlled atomic (molecular) ensembles. We demonstrate wide opportunities of the proposed computer. Firstly, we reveal a perfect storage of external photon qubits to multi-mode quantum memory node and demonstrate a reversible exchange of the qubits between any arbitrary nodes. We found optimal parameters of atoms in the circuit and self quantum modes for quantum processing. The predicted perfect storage has been observed experimentally for microwave radiation on the lithium phthalocyaninate molecule ensemble. Then also, for the first time we show a realization of the efficient basic two-qubit gate with direct coupling of two arbitrary nodes by using appropriate atomic frequency shifts in the circuit nodes. Proposed two-qubit gate runs with a speed drastically accelerated proportionally to the number of atoms in the node. The direct coupling and accelerated two-qubit gate can be realized for large number of the circuit nodes. Finally, we describe two and three-dimensional scalable architectures that pave the road to construction of universal multi-qubit quantum computer operating at room temperatures.

S. A. Moiseev; F. F. Gubaidullin; S. N. Andrianov

2010-01-07T23:59:59.000Z

142

Parallel and Distributed Multi-Algorithm Circuit Simulation  

E-Print Network (OSTI)

With the proliferation of parallel computing, parallel computer-aided design (CAD) has received significant research interests. Transient transistor-level circuit simulation plays an important role in digital/analog circuit design and verification...

Dai, Ruicheng

2012-10-19T23:59:59.000Z

143

Parallel Algorithms for Time and Frequency Domain Circuit Simulation  

E-Print Network (OSTI)

solution to circuit simulation besides the known application of distributed-memory clustered computing platforms, which provides abundant hardware computing resources. This research addresses the limitations of traditional serial circuit simulations...

Dong, Wei

2010-10-12T23:59:59.000Z

144

General equivalent circuit of batteries and fuel cells  

Science Journals Connector (OSTI)

A general electrical circuit is described whose properties are analogous to those of fuel cells and batteries. It is shown how this equivalent circuit ... in the electrolyte on the output voltage of fuel cells an...

R. A. Huggins

1999-01-01T23:59:59.000Z

145

Constraint satisfaction modules : a methodology for analog circuit design  

E-Print Network (OSTI)

This dissertation describes a methodology for solving convex constraint problems using analog circuits. It demonstrates how this methodology can be used to design circuits that solve function-fitting problems through ...

Mitros, Piotr, 1979-

2007-01-01T23:59:59.000Z

146

Micro Electret Energy Harvesting Device with Analogue Impedance Conversion Circuit  

E-Print Network (OSTI)

Micro Electret Energy Harvesting Device with Analogue Impedance Conversion Circuit Yuji Suzuki1 using a low-power-consumption impedance conversion circuit. Key words: Energy harvesting, Electret, CYTOP, Parylene spring, Impedance conversion 1. INTRODUCTION Energy harvesting from environmental

Kasagi, Nobuhide

147

Circuit and bond polytopes on series-parallel graphs$  

E-Print Network (OSTI)

Jul 10, 2014 ... In the literature, a circuit is sometimes called simple cycle. ... of the circuits of series-parallel graphs, combined with a theorem of Balas [2, 3].

2014-07-10T23:59:59.000Z

148

Trust in analog : analog circuit techniques for reducing the risk of malicious circuits and software  

E-Print Network (OSTI)

Malicious circuits and software present a significant security risk, especially in control applications. This work is concerned with increasing the trustworthiness of control circuitry by reducing its complexity. The ...

Kuznetsov, Eugene

2011-01-01T23:59:59.000Z

149

IMPORTANCE OF NEUTRINOLESS DOUBLE BETA DECAY Abstract  

E-Print Network (OSTI)

number violation in nature and what is its magnitude. The neutrinoless double beta decay experiment can

U. Sarkar; Utpal Sarkar

150

A Spatial Computing Architecture for Implementing Computational Circuits  

E-Print Network (OSTI)

A Spatial Computing Architecture for Implementing Computational Circuits David Grant and Guy G. F an architecture and tool flow for rapidly compiling and simulating/executing computational circuits. We use tool could quickly map a computational circuit onto the architecture. Field Programmable Gate Arrays

Lemieux, Guy

151

Logic Synthesis with High Speed CMOS Circuit Techniques  

Science Journals Connector (OSTI)

Systems for automated logic synthesis with the True Single Phase Clocking circuit technique (TSPC) and a modified form of the Clock and Data Precharged Dynamic (CDPD) circuit technique, are presented. The CDPD system synthesizes high speed one clock ... Keywords: CMOS integrated circuits, logic synthesis

Johnny Pihl; Einar J. Aas

1997-01-01T23:59:59.000Z

152

Optimized Waveform Relaxation Solution of RLCG Transmission Line Type Circuits  

E-Print Network (OSTI)

Optimized Waveform Relaxation Solution of RLCG Transmission Line Type Circuits Mohammad D. Al to transmission line circuit problems based on the longitudinal partitioning into segments. This greatly improves the convergence for strongly coupled RLCG transmission line (TL) type circuits. The method can be applied to other

Gander, Martin J.

153

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS, VOL. CAS-32,NO. 7, JULY 1985 Circuits, k-Ports, Hidden Modes, and  

E-Print Network (OSTI)

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS, VOL. CAS-32,NO. 7, JULY 1985 Circuits, k-Ports, Hidden Modes, and Stability of Interconnected k-Ports 635 CHARLES A. DESOER, FELLOW, IEEE, AND A. NAZLI GijNDES Alisrrocr -This paper exclusively considers lumped k-ports and circuits which contain linear time

Gundes, A. N.

154

TRIAC/SCR proportional control circuit  

DOE Patents (OSTI)

A power controller device is disclosed which uses a voltage-to-frequency converter in conjunction with a zero crossing detector to linearly and proportionally control AC power being supplied to a load. The output of the voltage-to frequency converter controls the ``reset`` input of a R-S flip flop, while an ``0`` crossing detector controls the ``set`` input. The output of the flip flop triggers a monostable multivibrator controlling the SCR or TRIAC firing circuit connected to the load. Logic gates prevent the direct triggering of the multivibrator in the rare instance where the ``reset`` and ``set`` inputs of the flip flop are in coincidence. The control circuit can be supplemented with a control loop, providing compensation for line voltage variations. 9 figs.

Hughes, W.J.

1999-04-06T23:59:59.000Z

155

TRIAC/SCR proportional control circuit  

DOE Patents (OSTI)

A power controller device which uses a voltage-to-frequency converter in conjunction with a zero crossing detector to linearly and proportionally control AC power being supplied to a load. The output of the voltage-to frequency converter controls the "reset" input of a R-S flip flop, while an "0" crossing detector controls the "set" input. The output of the flip flop triggers a monostable multivibrator controlling the SCR or TRIAC firing circuit connected to the load. Logic gates prevent the direct triggering of the multivibrator in the rare instance where the "reset" and "set" inputs of the flip flop are in coincidence. The control circuit can be supplemented with a control loop, providing compensation for line voltage variations.

Hughes, Wallace J. (Boston Lake, NY)

1999-01-01T23:59:59.000Z

156

Vacuum die attach for integrated circuits  

DOE Patents (OSTI)

A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

Schmitt, E.H.; Tuckerman, D.B.

1991-09-10T23:59:59.000Z

157

Custom VLSI circuits for high energy physics  

SciTech Connect

This article provides a brief guide to integrated circuits, including their design, fabrication, testing, radiation hardness, and packaging. It was requested by the Panel on Instrumentation, Innovation, and Development of the International Committee for Future Accelerators, as one of a series of articles on instrumentation for future experiments. Their original request emphasized a description of available custom circuits and a set of recommendations for future developments. That has been done, but while traps that stop charge in solid-state devices are well known, those that stop physicists trying to develop the devices are not. Several years spent dodging the former and developing the latter made clear the need for a beginner`s guide through the maze, and that is the main purpose of this text.

Parker, S. [Univ. of Hawaii, Honolulu, HI (United States)

1998-06-01T23:59:59.000Z

158

Base drive and overlap protection circuit  

DOE Patents (OSTI)

An inverter (34) which provides power to an A. C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A. C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A. C. machine is optimized. The control circuit includes a microcomputer and memory element which receive various parametric inputs and calculate optimized machine control data signals therefrom. The control data is asynchronously loaded into the inverter through an intermediate buffer (38). A base drive and overlap protection circuit is included to insure that both transistors of a complimentary pair are not conducting at the same time. In its preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack (32) and a three-phase induction motor (18).

Gritter, David J. (Southfield, MI)

1983-01-01T23:59:59.000Z

159

Advanced tools for integrated circuit design  

E-Print Network (OSTI)

line etc. ) Server Module Lexical Analyser P arser I N T E R F A C E S T 0 R A G E Code Generator Memory Manager S T A C K Interpret Module Output Interface Fig. 1. Architecture of MMHOC 13 Figure 1 shows the various.... This token value is used by the parser to parse the present sentence in the input stream. Since 17 typedef struct Symbol ( /+ symbol table entry +/ char +name; short type; union ( int char (edefn) (); *st r; double val; double (+ptr)(); /+ VAR...

Dubagunta, Sai Kumar

1992-01-01T23:59:59.000Z

160

Decimal System and Double Digits  

NLE Websites -- All DOE Office Websites (Extended Search)

Decimal System and Double Digits Decimal System and Double Digits Name: Ken Status: other Grade: other Country: Canada Date: April 2011 Question: If the origin of the decimal system reflects counting on ten fingers and if zero came into use after the decimal system had been established why did we not create a single symbol for our tenth digit rather than use the double digit 10? If T were to represent the tenth number this would have created a counting system where the number series 1,2...9,T is followed by the same series having a 1 to the left then followed by the same series having a 2 to the left, etc. The T would be the last number in a series of ten single digits rather than be the first number in a series of double digits. The symbol zero would be used only between negative one and positive one because it represents the existence of nothing and, therefore, would have no other function.

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Improved analysis techniques for cylindrical and spherical double probes  

SciTech Connect

A versatile double Langmuir probe technique has been developed by incorporating analytical fits to Laframboise's numerical results for ion current collection by biased electrodes of various sizes relative to the local electron Debye length. Application of these fits to the double probe circuit has produced a set of coupled equations that express the potential of each electrode relative to the plasma potential as well as the resulting probe current as a function of applied probe voltage. These equations can be readily solved via standard numerical techniques in order to determine electron temperature and plasma density from probe current and voltage measurements. Because this method self-consistently accounts for the effects of sheath expansion, it can be readily applied to plasmas with a wide range of densities and low ion temperature (T{sub i}/T{sub e} Much-Less-Than 1) without requiring probe dimensions to be asymptotically large or small with respect to the electron Debye length. The presented approach has been successfully applied to experimental measurements obtained in the plume of a low-power Hall thruster, which produced a quasineutral, flowing xenon plasma during operation at 200 W on xenon. The measured plasma densities and electron temperatures were in the range of 1 Multiplication-Sign 10{sup 12}-1 Multiplication-Sign 10{sup 17} m{sup -3} and 0.5-5.0 eV, respectively. The estimated measurement uncertainty is +6%/-34% in density and +/-30% in electron temperature.

Beal, Brian; Brown, Daniel; Bromaghim, Daron [Air Force Research Laboratory, 1 Ara Rd., Edwards Air Force Base, California 93524 (United States); Johnson, Lee [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Dr., Pasadena, California 91109 (United States); Blakely, Joseph [ERC Inc., 1 Ara Rd., Edwards Air Force Base, California 93524 (United States)

2012-07-15T23:59:59.000Z

162

NEUTRINOLESS DOUBLE BETA DECAY AND ITS INVERSE  

E-Print Network (OSTI)

subsequently published arguments, non-observation of neutrinoless double beta decay has, to date, no bearing on

Clemens A. Heusch; Peter Minkowski

1996-01-01T23:59:59.000Z

163

Neutrinoless Double Beta Decay and CP Violation  

E-Print Network (OSTI)

neutrinoless double beta decay in the case of two neutrino generations (or when the third generation leptons do

Patrick J. Odonnell; Utpal Sarkar

1993-01-01T23:59:59.000Z

164

Synthesis of the Optimal 4-bit Reversible Circuits  

E-Print Network (OSTI)

Optimal synthesis of reversible functions is a non-trivial problem. One of the major limiting factors in computing such circuits is the sheer number of reversible functions. Even restricting synthesis to 4-bit reversible functions results in a huge search space (16!~2^44 functions). The output of such a search alone, counting only the space required to list Toffoli gates for every function, would require over 100 terabytes of storage. In this paper, we present an algorithm that synthesizes an optimal circuit for any 4-bit reversible specification. We employ several techniques to make the problem tractable. We report results from several experiments, including synthesis of random 4-bit permutations, optimal synthesis of all 4-bit linear reversible circuits, synthesis of existing benchmark functions, and distribution of optimal circuits. Our results have important implications for the design and optimization of quantum circuits, testing circuit synthesis heuristics, and performing experiments in the area of quantum information processing.

Oleg Golubitsky; Sean M. Falconer; Dmitri Maslov

2010-03-09T23:59:59.000Z

165

3D packaging for integrated circuit systems  

SciTech Connect

A goal was set for high density, high performance microelectronics pursued through a dense 3D packing of integrated circuits. A {open_quotes}tool set{close_quotes} of assembly processes have been developed that enable 3D system designs: 3D thermal analysis, silicon electrical through vias, IC thinning, mounting wells in silicon, adhesives for silicon stacking, pretesting of IC chips before commitment to stacks, and bond pad bumping. Validation of these process developments occurred through both Sandia prototypes and subsequent commercial examples.

Chu, D.; Palmer, D.W. [eds.

1996-11-01T23:59:59.000Z

166

Doubling of atmospheric methane supported  

SciTech Connect

Atmospheric methane over the past 27,000 years was measured by analyzing air trapped in glacial ice in Greenland and Antarctica. Atmospheric concentrations were stable over that period until about 200 years b.p. In the last 200 years they have more than doubled. This change in concentration is correlated with the increase in human population; the implications for climate modification are discussed. 1 figure, 3 references.

Kerr, R.A.

1984-11-23T23:59:59.000Z

167

Laser Micromachining of Active and Passive Photonic Integrated Circuits  

E-Print Network (OSTI)

This thesis describes the development of advanced laser resonators and applications of laserinduced micromachining for photonic circuit fabrication. Two major advantages of laserinduced micromachining are direct patterning ...

Cho, Seong-Ho

2006-06-28T23:59:59.000Z

168

Circuit Topology Study of Grid-Connected Photovoltaic System.  

E-Print Network (OSTI)

??Many different circuit topologies have been suggested for large scale photovoltaic systems. The cost and the efficiency are still the major issues of large scale (more)

Mansouri, Seyed Akbar

2011-01-01T23:59:59.000Z

169

6.012 Microelectronic Devices and Circuits, Fall 2003  

E-Print Network (OSTI)

Modeling of microelectronic devices, and basic microelectronic circuit analysis and design. Physical electronics of semiconductor junction and MOS devices. Relation of electrical behavior to internal physical processes; ...

Fonstad, Clifton G.

170

Graphene-based plasmonic waveguides for photonic integrated circuits  

Science Journals Connector (OSTI)

We perform experimental investigations on the characteristics of graphene-based plasmonic waveguides for development of photonic integrated circuits. By embedding chemical vapor...

Kim, Jin Tae; Choi, Sung-Yool

2011-01-01T23:59:59.000Z

171

Derivative-free Robust Optimization for Circuit Design  

E-Print Network (OSTI)

Keywords Robust Optimization Derivative-free Methods Circuit Design ... uncertainty in real-world applications. ... no first order information is available (

2013-09-27T23:59:59.000Z

172

Reliable and economical circuit I V characterization solar cells  

Science Journals Connector (OSTI)

A transistorized circuit for solar cells which is easy to assemble and use for undergraduate teaching laboratories is described.(AIP)

Y. H. Muoy; J. P. Charles; M. Adbelkrim

1981-01-01T23:59:59.000Z

173

Development of nickel silicide for integrated circuit technology.  

E-Print Network (OSTI)

?? Continuous advancements in devices, materials and processes have resulted in integrated circuits with smaller device dimensions, higher functionality and higher speed. The complementary metal (more)

Do, Phu H.

2006-01-01T23:59:59.000Z

174

Design for manufacturability with regular fabrics in digital integrated circuits  

E-Print Network (OSTI)

Integrated circuit design is limited by manufacturability. As devices scale down, sensitivity to process variation increases dramatically, making design for manufacturability a critical concern. Designers must identify the ...

Gazor, Mehdi (Seyed Mehdi)

2005-01-01T23:59:59.000Z

175

Junction Temperature Measurement of IGBTs Using Short Circuit Current  

SciTech Connect

In this paper, a method is proposed to measure the junction temperatures of IGBT discrete devices and modules using short circuit current. Experimental results show that the short circuit current has good sensitivity, linearity and selectivity, which is suitable to be used as temperature sensitive electrical parameters (TSEP). Test circuit and hardware design are proposed for junction temperature measurement in single phase and three phase convertes. By connecting a temperature measurement unit to the converter and giving a short circuit pulse, the IGBT junction temperature can be measured.

Wang, Fei [ORNL; Xu, Zhuxian [ORNL; Ning, Puqi [ORNL

2012-01-01T23:59:59.000Z

176

Uncertainty Quantification for Nano-Scale Integrated Circuits...  

NLE Websites -- All DOE Office Websites (Extended Search)

Uncertainty Quantification for Nano-Scale Integrated Circuits and MEMS Design Event Sponsor: Mathematics and Computing Science Seminar Start Date: Jan 20 2015 - 10:30am Building...

177

Interrogator system for identifying electrical circuits  

DOE Patents (OSTI)

A system for interrogating electrical leads to correctly ascertain the identity of equipment attached to remote ends of the leads is disclosed. The system includes a source of a carrier signal generated in a controller/receiver to be sent over the leads and an identifier unit at the equipment. The identifier is activated by command of the carrier and uses a portion of the carrier to produce a supply voltage. Each identifier is uniquely programmed for a specific piece of equipment, and causes the impedance of the circuit to be modified whereby the carrier signal is modulated according to that program. The modulation can be amplitude, frequency or phase modulation. A demodulator in the controller/receiver analyzes the modulated carrier signal, and if a verified signal is recognized displays and/or records the information. This information can be utilized in a computer system to prepare a wiring diagram of the electrical equipment attached to specific leads. Specific circuit values are given for amplitude modulation, and the system is particularly described for use with thermocouples. 6 figs.

Jatko, W.B.; McNeilly, D.R.

1988-04-12T23:59:59.000Z

178

Hydraulic actuator for an electric circuit breaker  

DOE Patents (OSTI)

This actuator comprises a fluid motor having a piston, a breaker-opening space at one side of the piston, and a breaker-closing space at its opposite side. An accumulator freely communicates with the breaker-opening space for supplying pressurized fluid thereto during a circuit breaker opening operation. The breaker-opening space and the breaker-closing space are connected by an impeded flow passage. A pilot valve opens to allow the pressurized liquid in the breaker-closing space to flow to a back chamber of a normally closed main valve to cause the main valve to be opened during a circuit breaker opening operation to release the pressurized liquid from the breaker-closing space. An impeded passage affords communication between the back chamber and a sump located on the opposite side of the main valve from the back chamber. The pilot valve and impeded passage allow rapid opening of the main valve with pressurized liquid from the breaker closing side of the piston. 3 figs.

Imam, I.

1983-05-17T23:59:59.000Z

179

A mathematical analysis of optimized waveform relaxation for a small RC circuit  

Science Journals Connector (OSTI)

Waveform relaxation techniques are an important tool for the simulation of very large scale circuits. They are based on a partition of the circuit into sub-circuits, and then use an iteration between sub-circuits to converge to the solution of the entire ... Keywords: Circuit simulation, Optimized transmission conditions, Waveform relaxation

Mohammad Al-Khaleel; Martin J. Gander; Albert E. Ruehli

2014-01-01T23:59:59.000Z

180

Negative Feedback Facilitates Temperature Robustness in Biomolecular Circuit Dynamics  

E-Print Network (OSTI)

on circuit dynamics. Further, we find that eective negative feedback due to first-order degradation this goal of functional robustness have proceeded at multiple levels. At one level, there have been eorts, in the study of naturally occurring biomolecular circuits, robustness to the impor- tant environmental variable

Murray, Richard M.

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Synthesis and Optimization of Reversible Circuits for Homogeneous Boolean Functions  

E-Print Network (OSTI)

Homogenous Boolean function is an essential part of any cryptographic system. The ability to construct an optimized reversible circuits for homogeneous Boolean functions might arise the possibility of building cryptographic system on novel computing paradigms such as quantum computers. This paper shows a factorization algorithm to synthesize such circuits.

Ahmed Younes

2007-10-02T23:59:59.000Z

182

Early Power Grid Verification Under Circuit Current Uncertainties  

E-Print Network (OSTI)

Early Power Grid Verification Under Circuit Current Uncertainties Imad A. Ferzli Department of ECE Eindhoven, The Netherlands lars@magma-da.com ABSTRACT As power grid safety becomes increasingly important in modern integrated circuits, so does the need to start power grid verifica- tion early in the design cycle

Najm, Farid N.

183

AUTOMATIC SYNTHESIS OF OPERATIONAL AMPLIFIERS BASED ON ANALYTIC CIRCUIT  

E-Print Network (OSTI)

a practical intermediate approach to automating op amp synthesis. It is based on analytic circuit models simulation to verify that indeed all the design specifications are met. This whole process has been automatedAUTOMATIC SYNTHESIS OF OPERATIONAL AMPLIFIERS BASED ON ANALYTIC CIRCUIT MODELS Han Young Koh, Carlo

O'Brien, James F.

184

The I.T. circuit certificate: training for the future  

Science Journals Connector (OSTI)

St. Edward's University Instructional Technology department developed a free certification program called the I.T. Circuit. The I.T. Circuit was developed to help faculty, staff, and students build the technology skills needed at home, school, or in ... Keywords: computer certification, computer competency, computer education, computer training, computer training program, training

Joana Trimble

2005-11-01T23:59:59.000Z

185

IMPACT OF DYNAMIC VOLTAGE SCALING (DVS) ON CIRCUIT OPTIMIZATION  

E-Print Network (OSTI)

and dynamic power, respectively. Both gate sizing and Dual-VT are design-time techniques, which are applied to the circuit at a fixed voltage. On the other hand, DVS is a run-time technique and implies that the circuit will be operating at a different voltage...

Esquit Hernandez, Carlos A.

2010-01-16T23:59:59.000Z

186

Electromagnetic Interference (EMI) Resisting Analog Integrated Circuit Design Tutorial  

E-Print Network (OSTI)

ELECTROMAGNETIC INTERFERENCE (EMI) RESISTING ANALOG INTEGRATED CIRCUIT DESIGN TUTORIAL A Thesis by JINGJING YU Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 2012 Major Subject: Electrical Engineering ELECTROMAGNETIC INTERFERENCE (EMI) RESISTING ANALOG INTEGRATED CIRCUIT DESIGN TUTORIAL A Thesis by JINGJING YU Submitted to the Office...

Yu, Jingjing

2012-10-19T23:59:59.000Z

187

Short-Circuit Modeling of a Wind Power Plant: Preprint  

SciTech Connect

This paper investigates the short-circuit behavior of a WPP for different types of wind turbines. The short-circuit behavior will be presented. Both the simplified models and detailed models are used in the simulations and both symmetrical faults and unsymmetrical faults are discussed.

Muljadi, E.; Gevorgian, V.

2011-03-01T23:59:59.000Z

188

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY SUNDAY Boot Camp Circuit  

E-Print Network (OSTI)

MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY SUNDAY Boot Camp Circuit 12:00pm-12:50pm Adarell Body Pump 7:30am­8:30am Nina Boot Camp Circuit 8:00am­8:50am Adarell Body Pump 7:15am-8:15am Carla Body

Sharp, Kim

189

High density Integrated Optoelectronic Circuits for High Speed Photonic Microsystems  

E-Print Network (OSTI)

High density Integrated Optoelectronic Circuits for High Speed Photonic Microsystems K. Minoglou.minoglou@imel.demorkitos.gr Abstract. The study of high density integrated optoelectronic circuits involves the development of hybrid integration technologies and the generation of models for the optoelectronic devices. To meet these goals

Kouroupetroglou, Georgios

190

Module d'Electrotechnique ET2 Circuits magnetiques  

E-Print Network (OSTI)

A/Wb ou H-1 A.De Carvalho Circuits Magn´etiques #12;Force magn´eto motrice Posons : = N ? I D´efinition est appel´ee force magn´eto motrice. Son unit´e est l' Amp`ere tour (A ? t) A.De Carvalho Circuits

Histace, Aymeric

191

GPU-based parallelization for fast circuit optimization  

Science Journals Connector (OSTI)

The progress of GPU (Graphics Processing Unit) technology opens a new avenue for boosting computing power. This work is an attempt to exploit GPU for accelerating VLSI circuit optimization. We propose GPU-based parallel computing techniques and apply ... Keywords: GPU, VLSI circuit optimization, parallel computing

Yifang Liu; Jiang Hu

2009-07-01T23:59:59.000Z

192

A Low Noise Readout Circuit for Integrated Electrochemical Biosensor Arrays  

E-Print Network (OSTI)

A Low Noise Readout Circuit for Integrated Electrochemical Biosensor Arrays Jichun Zhang, Nicholas 48823, USA {zhangjic, tromblyn, mason}@egr.msu.edu Abstract This paper presents a low noise electrochemical interface circuit that is tuned to the needs of protein-based biosensor arrays and compatible

Mason, Andrew

193

High Resolution PV Power Modeling for Distribution Circuit Analysis  

SciTech Connect

NREL has contracted with Clean Power Research to provide 1-minute simulation datasets of PV systems located at three high penetration distribution feeders in the service territory of Southern California Edison (SCE): Porterville, Palmdale, and Fontana, California. The resulting PV simulations will be used to separately model the electrical circuits to determine the impacts of PV on circuit operations.

Norris, B. L.; Dise, J. H.

2013-09-01T23:59:59.000Z

194

COPLANAR DIGITAL MICROFLUIDICS USING STANDARD PRINTED CIRCUIT BOARD PROCESSES  

E-Print Network (OSTI)

COPLANAR DIGITAL MICROFLUIDICS USING STANDARD PRINTED CIRCUIT BOARD PROCESSES P.Y. Paik1 , V circuit board (PCB) and 3. Transport and mixing in an "open" microfluidic substrate. Similar to "soft-flow microfluidics, this work allows researchers to easily experiment with discrete-flow microfluidics (digital

Chakrabarty, Krishnendu

195

LOW VOLTAGE ANALOG CIRCUITS USING STANDARD CMOS TECHNOLOGY  

E-Print Network (OSTI)

LOW VOLTAGE ANALOG CIRCUITS USING STANDARD CMOS TECHNOLOGY Phillip E. Allen, Benjamin J. Blalock, and Gabriel A. Rincon School of Electrical and Computer Engineering Georgia Institute of Technology Atlanta supply voltages in CMOS integrated circuits. As the channel lengths of CMOS technology decrease

Rincon-Mora, Gabriel A.

196

Conditioning circuit for temperature and strain measurement  

E-Print Network (OSTI)

be written as [4]; V. C, C?+Cz 1? Vying Ci ( Czd (3. 4) where V, ?: (Vj Vj ) (Vz Vj ). 26 Table I. Transistor aspect ratios for the CMOS switch Transistor Label Transistor Dimension (W:L) (p) Ml-M2 3:2 The gain error is thus seen to be proportional... value and form a volLage divider to drive node A, the gates of transistors Mll and VI12. A change Table II. Transistor aspect ratios for the DCMFB circuit Transistor Label Transistor Dimension (W:L) (p) Ml-M2 20:6 M3-M4 20:2 M5-M6 10:2 M7-M8 M...

Patel, Aashit Mahendra

2012-06-07T23:59:59.000Z

197

Integral testing of relays and circuit breakers  

SciTech Connect

Among all equipment types considered for seismic qualification, relays have been most extensively studied through testing due to a wide variation of their designs and seismic capacities. A temporary electrical discontinuity or ``chatter`` is the common concern for relays. A chatter duration of 2 milliseconds is typically used as an acceptance criterion to determine the seismic capability of a relay. Many electrical devices, on the other hand, receiving input signals from relays can safely tolerate a chatter level much greater than 2 ms. In Phase I of a test program, Brookhaven National Laboratory performed testing of many relay models using the 2-ms chatter criterion. In Phase II of the program, the factors influencing the relay chatter criterion, and impacts of relay chatter on medium and low voltage circuit breakers and lockout relays were investigated. This paper briefly describes the Phase II tests and presents the important observations.

Bandyopadhyay, K.K.

1993-12-31T23:59:59.000Z

198

Theory of degenerate three-wave mixing using circuit QED in solid-state circuits  

SciTech Connect

We study the theory of degenerate three-wave mixing and the generation of squeezed microwaves using circuit quantum electrodynamics in solid state circuits. The Hamiltonian for degenerate three-wave mixing, which seemed to be given phenomenologically in quantum optics, is derived by quantum mechanical calculations. The nonlinear medium needed in three-wave mixing is composed of a series of superconducting charge qubits which are located inside two superconducting transmission-line resonators. Here, the multiqubit ensemble is present to enhance the effective coupling constant between the two modes in the transmission-line resonators. In the squeezing process, the qubits are kept in their ground states so that their decoherence does not corrupt the squeezing. The main obstacle preventing a large squeezing efficiency is the decay rate of the transmission-line resonator.

Cao, Ye [Key Laboratory of Atomic and Molecular Nanosciences and Department of Physics, Tsinghua University, Beijing 100084 (China); Huo, Wen Yi [Institute of Applied Physics and Computational Mathematics, Beijing 100088 (China); Ai, Qing [Institute of Theoretical Physics, Chinese Academy of Sciences, Beijing 100190 (China); Long, Gui Lu [Key Laboratory of Atomic and Molecular Nanosciences and Department of Physics, Tsinghua University, Beijing 100084 (China); Tsinghua National Laboratory For Information Science and Technology, Beijing 100084 (China)

2011-11-15T23:59:59.000Z

199

SAT-based Verification for Analog and Mixed-signal Circuits  

E-Print Network (OSTI)

The wide application of analog and mixed-signal (AMS) designs makes the verification of AMS circuits an important task. However, verification of AMS circuits remains as a significant challenge even though verification techniques for digital circuits...

Deng, Yue

2012-07-16T23:59:59.000Z

200

Ribozyme-based "insulator parts" buffer synthetic circuits from genetic context  

E-Print Network (OSTI)

Synthetic genetic programs are built from circuits that integrate sensors and implement temporal control of gene expression14. Transcriptional circuits are layered by using promoters to carry the signal between circuits. ...

Lou, Chunbo

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

2 IEEE TRANSACTIONS ON CIRCUIT THEORY, VOL. CT-16, NO. 1, BBBRUARY 1969 The Modified Circuit Matrix of an &Port  

E-Print Network (OSTI)

of an &Port Network and Its Applications KRISIINAIYAN THULASIRAMRN AND VEMPATI G. I Abstracf-Certain properties of the modified circuit matrix useful in the analysis and synthesis of n-port pseudoseries connection of n-port networks. The use- fulness of the concept of the modified circuit matrix

Thulsiraman, Krishnaiyan

202

468 IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS, VOL. 5, NO. 5, OCTOBER 2011 Photodiode Circuits for Retinal Prostheses  

E-Print Network (OSTI)

468 IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS, VOL. 5, NO. 5, OCTOBER 2011 Photodiode, and Daniel V. Palanker Abstract--Photodiode circuits show promise for the devel- opment of high, existing descriptions of the complex optoelectronic in- teraction between light, photodiode

Palanker, Daniel

203

Reversed Doppler effect in double negative metamaterials  

Science Journals Connector (OSTI)

Doppler shifts in double negative metamaterials have never been observed. This Rapid Communication presents experimental results on Doppler effect in a double negative acoustic metamaterial. We observed that frequency was downshifted when the source was approaching and upshifted when receding. Notably, while in ordinary media wavelengths corresponding to downshifted frequencies are longer, we demonstrate that in double negative metamaterials wavelengths increase as the frequencies increase. Consequently even though the frequencies were downshifted in front of the moving source, the wavelengths became shorter.

Sam Hyeon Lee; Choon Mahn Park; Yong Mun Seo; Chul Koo Kim

2010-06-14T23:59:59.000Z

204

Biophysical neuron and synapse circuits in recongurable and scaleable analog VLSI  

E-Print Network (OSTI)

firing patterns of a compact vlsi cortical neuron circuit.firing. Appendix A NeuroDyn A.1 Derivation of the circuit

Yu, Theodore Ernest

2012-01-01T23:59:59.000Z

205

1. Boolean Functions and Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  

E-Print Network (OSTI)

Contents 1. Boolean Functions and Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Boolean Functions and Formulas . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Circuit

Kranakis, Evangelos

206

The choice of substation electric connection circuits: a unified or an individual approach?1  

Science Journals Connector (OSTI)

Typical substation electric connection circuits, used at the present ... analyzed. Some versions of the use of substation distributor circuits for controlling electric network modes ... analyzed. Recommendations ...

V. P. Budovskii; V. V. Ushakov

2011-07-01T23:59:59.000Z

207

E-Print Network 3.0 - arsenide integrated circuit Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

-3:40pm Summary: 02139 A novel epitaxy-on-electronics process for fabricating optoelectronic integrated circuits (OE- ICs... integrated circuit technology base, this...

208

Home News News Archives Fab News "Flexible" Circuit Boards in Development  

E-Print Network (OSTI)

Home News News Archives Fab News "Flexible" Circuit Boards in Development Contact Us use silicon in integrated circuits that are fully foldable and stretchable." [ Back ] Home News

Rogers, John A.

209

Double perovskite catalysts for oxidative coupling  

DOE Patents (OSTI)

Alkali metal doped double perovskites containing manganese and at least one of cobalt, iron and nickel are useful in the oxidative coupling of alkane to higher hydrocarbons.

Campbell, K.D.

1991-01-01T23:59:59.000Z

210

Review of double beta decay experiments  

E-Print Network (OSTI)

The brief review of current experiments on search and studying of double beta decay processes is done. Best present limits on $\\langle m_{\

A. S. Barabash

2014-03-12T23:59:59.000Z

211

Review of double beta decay experiments  

E-Print Network (OSTI)

The brief review of current experiments on search and studying of double beta decay processes is done. Best present limits on $\\langle m_{\

Barabash, A S

2014-01-01T23:59:59.000Z

212

Thermally-induced voltage alteration for integrated circuit analysis  

DOE Patents (OSTI)

A thermally-induced voltage alteration (TIVA) apparatus and method are disclosed for analyzing an integrated circuit (IC) either from a device side of the IC or through the IC substrate to locate any open-circuit or short-circuit defects therein. The TIVA apparatus uses constant-current biasing of the IC while scanning a focused laser beam over electrical conductors (i.e. a patterned metallization) in the IC to produce localized heating of the conductors. This localized heating produces a thermoelectric potential due to the Seebeck effect in any conductors with open-circuit defects and a resistance change in any conductors with short-circuit defects, both of which alter the power demand by the IC and thereby change the voltage of a source or power supply providing the constant-current biasing. By measuring the change in the supply voltage and the position of the focused and scanned laser beam over time, any open-circuit or short-circuit defects in the IC can be located and imaged. The TIVA apparatus can be formed in part from a scanning optical microscope, and has applications for qualification testing or failure analysis of ICs.

Cole, Jr., Edward I. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

213

Comparing Double String Theory Actions  

E-Print Network (OSTI)

Aimed to a deeper comprehension of a manifestly T-dual invariant formulation of string theory, in this paper a detailed comparison between the non-covariant action proposed by Tseytlin and the covariant one proposed by Hull is done. These are obtained by making both the string coordinates and their duals explicitly appear, on the same foot, in the world-sheet action, so "doubling" the string coordinates along the compact dimensions. After a discussion of the nature of the constraints in both the models and the relative quantization, it results that the string coordinates and their duals behave like "non-commuting" phase space type coordinates but their expressions in terms of Fourier modes generate the oscillator algebra of the standard bosonic string formulation. A proof of the equivalence of the two formulations is given. Furthermore, open-string solutions are also discussed.

Luca De Angelis; S. J. Gabriele Gionti; Raffaele Marotta; Franco Pezzella

2013-12-27T23:59:59.000Z

214

High density electronic circuit and process for making  

DOE Patents (OSTI)

High density circuits with posts that protrude beyond one surface of a substrate to provide easy mounting of devices such as integrated circuits. The posts also provide stress relief to accommodate differential thermal expansion. The process allows high interconnect density with fewer alignment restrictions and less wasted circuit area than previous processes. The resulting substrates can be test platforms for die testing and for multi-chip module substrate testing. The test platform can contain active components and emulate realistic operational conditions, replacing shorts/opens net testing.

Morgan, William P. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

215

Screening technology reduces ash in spiral circuits  

SciTech Connect

In 2006, the James River Coal Co. selected the Stack Sizer to remove the minus 100 mesh high ash clay fraction from the clean coal spiral product circuits at the McCoy-Elkhorn Bevins Branch prep plant and at the Blue Diamond Leatherwood prep plant in Kentucky. The Stack Sizer is a multi-deck, high-frequency vibrating screen capable of separations as fine as 75 microns when fitted with Derrick Corp.'s patented high open area urethane screen panels. Full-scale lab tests and more than 10 months of continuous production have confirmed that the Stack Sizer fitted with Derrick 100 micron urethane screen panels consistently produces a clean coal fraction that ranges from 8 to 10% ash. Currently, each five-deck Stack Sizer operating at the Bevins Branch and Leatherwood prep plants is producing approximately 33 tons per hour of clean coal containing about 9% ash. This represents a clean coal yield of about 75% and an ash reduction of about 11% from the feed slurry. 3 figs. 2 tabs.

Brodzik, P. [Derrick Corp., Buffalo, NY (United States)

2007-05-15T23:59:59.000Z

216

Double superexchange in quantum dot mesomaterials  

E-Print Network (OSTI)

as the critical obstacles to dramatic enhancements in the energy conversion efficiency of photovoltaic cells based.7­10 A low binding energy allows excitons to thermally dissociate and charge carriers hop from dot exhibits a double superexchange. In addition to enhancing carrier hopping rates, double superexchange plays

Wu, Zhigang

217

Double beta decay: experiments and theory review  

E-Print Network (OSTI)

Neutrinoless double beta decay is one of the most powerful tools to set the neutrino mass absolute scale and establish whether the neutrino is a Majorana particle. After a summary of the neutrinoless double beta decay phenomenology, the present status of the experimental search for this rare decay is reported and the prospects for next generation experiments are reviewed.

A. Nucciotti

2007-07-15T23:59:59.000Z

218

DOE - Office of Legacy Management -- Electro Circuits Inc - CA 08  

Office of Legacy Management (LM)

Electro Circuits Inc - CA 08 Electro Circuits Inc - CA 08 FUSRAP Considered Sites Site: Electro Circuits, Inc. (CA.08 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 401 East Green Street , Pasadena , California CA.08-1 Evaluation Year: 1994 CA.08-2 Site Operations: Conducted ultrasonic tests on uranium ingots in the early 1950s. CA.08-3 CA.08-4 Site Disposition: Eliminated - Potential for contamination remote based on limited operations at the site CA.08-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium Metal CA.08-3 Radiological Survey(s): No Site Status: Eliminated from consideration under FUSRAP Also see Documents Related to Electro Circuits, Inc. CA.08-1 - AEC Memorandum; Parsegian to Musser; Subject: Transfer of

219

Scaling down DNA circuits with competitive neural networks  

Science Journals Connector (OSTI)

...only. It is straightforward to enforce competition in synthetic DNA circuits, because strands with common domains can easily...have presented two implementations of the WTA effect in synthetic DNA systems. While they both use autocatalysis and competition...

2013-01-01T23:59:59.000Z

220

DNA walker circuits: computational potential, design, and verification  

E-Print Network (OSTI)

stochastic model of DNA walker `circuits' based on experimental data, and demonstrate the merit of using the signal that opens up the path labelled by ¬X is added. (2) The nicking enzyme (E) attaches to the walker

Oxford, University of

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

DNA walker circuits: computational potential, design, and verification  

E-Print Network (OSTI)

stochastic model of DNA walker `circuits' based on experimental data, and demonstrate the merit of using strands, the selected track becomes unblocked. (2) The nicking enzyme (E) attaches to the walker

Oxford, University of

222

Specification of photonic circuits using quantum hardware description language  

Science Journals Connector (OSTI)

...environments/modelling languages, such as Modelica-[16] QHDL parser that computes the...computing a circuit expression from the Modelica specification, written in, for example...http://www.gpleda.org . 16 The Modelica Association. 1996 Modelica. See http...

2012-01-01T23:59:59.000Z

223

Retroactivity, modularity, and insulation in synthetic biology circuits  

E-Print Network (OSTI)

A central concept in synthetic biology is the reuse of well-characterized modules. Modularity simplifies circuit design by allowing for the decomposition of systems into separate modules for individual construction. Complex ...

Lin, Allen

2011-01-01T23:59:59.000Z

224

Graphene-based plasmonic photodetector for photonic integrated circuits  

Science Journals Connector (OSTI)

We developed a planar-type graphene-based plasmonic photodetector (PD) for the development of all-graphene photonic-integrated-circuits (PICs). By configuring the graphene plasmonic...

Kim, Jin Tae; Yu, Young-Jun; Choi, Hongkyw; Choi, Choon-Gi

2014-01-01T23:59:59.000Z

225

Advanced modeling of planarization processes for integrated circuit fabrication  

E-Print Network (OSTI)

Planarization processes are a key enabling technology for continued performance and density improvements in integrated circuits (ICs). Dielectric material planarization is widely used in front-end-of-line (FEOL) processing ...

Fan, Wei, Ph. D. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

226

Algorithms for VLSI Circuit Optimization and GPU-Based Parallelization  

E-Print Network (OSTI)

processing unit (GPGPU) technology provides massive parallel computing power. This research turns the complex computation task of circuit optimization into many subtasks processed by parallel threads. The proposed task partitioning and scheduling methods take...

Liu, Yifang

2010-07-14T23:59:59.000Z

227

Characterization of process variability and robust optimization of analog circuits  

E-Print Network (OSTI)

Continuous scaling of CMOS technology has enabled dramatic performance enhancement of CMOS devices and has provided speed, power, and density improvement in both digital and analog circuits. CMOS millimeter-wave applications ...

Lim, Daihyun, 1976-

2008-01-01T23:59:59.000Z

228

Case studies on lithography-friendly vlsi circuit layout  

E-Print Network (OSTI)

lithography-friendly. In this work, we intend to implement these modifications as a series of perturbations on the initial layout generated by the CAD tool for the circuit. To implement these changes we first calculate the feature variations offline...

Shah, Pratik Jitendra

2009-05-15T23:59:59.000Z

229

Genetic Circuit Performance under Conditions Relevant for Industrial Bioreactors  

E-Print Network (OSTI)

Synthetic genetic programs promise to enable novel applications in industrial processes. For such applications, the genetic circuits that compose programs will require fidelity in varying and complex environments. In this ...

Moser, Felix

230

Bounded Dataflow Networks and Latency-Insensitive Circuits  

E-Print Network (OSTI)

We present a theory for modular refinement of Synchronous Sequential Circuits (SSMs) using Bounded Dataflow Networks (BDNs). We provide a procedure for implementing any SSM into an LI-BDN, a special class of BDNs with some ...

Vijayaraghavan, Muralidaran

231

Design automation and analysis of three-dimensional integrated circuits  

E-Print Network (OSTI)

This dissertation concerns the design of circuits and systems for an emerging technology known as three-dimensional integration. By stacking individual components, dice, or whole wafers using a high-density electromechanical ...

Das, Shamik, 1977-

2004-01-01T23:59:59.000Z

232

Stochastic artificial retinas: algorithm, optoelectronic circuits, and implementation  

E-Print Network (OSTI)

Stochastic artificial retinas: algorithm, optoelectronic circuits, and implementation Philippe tasks in the presence of discontinuities, dedicated optoelectronic hardware to implement thermal motion by photodetection of speckles, and hybrid architectures that combine optoelectronic, asynchronous

Boyer, Edmond

233

Capturing collective conflict dynamics with sparse social circuits  

E-Print Network (OSTI)

We discuss a set of computational techniques, called Inductive Game Theory, for extracting strategic decision-making rules from time series data and constructing probabilistic social circuits. We construct these circuits by connecting component individuals and groups with strategies in a game and propose an inductive approach to reconstructing the edges. We demonstrate this approach with conflict behavior in a society of pigtailed macaques by identifying significant patterns in decision-making by individuals. With the constructed circuit, we then capture macroscopic features of the system that were not specified in the construction of the initial circuit, providing a mapping between individual level behaviors to collective behaviors over the scale of the group. We extend on previous work in Inductive Game Theory by more efficiently searching the space of possible strategies by grouping individuals into socially relevant sets to produce a more efficient, parsimonious specification of the underlying interaction...

Lee, Edward; Flack, Jessica; Krakauer, David

2014-01-01T23:59:59.000Z

234

Synthetic biology: Understanding biological design from synthetic circuits  

E-Print Network (OSTI)

An important aim of synthetic biology is to uncover the design principles of natural biological systems through the rational design of gene and protein circuits. Here, we highlight how the process of engineering biological ...

Mukherji, Shankar

235

Laser micromachining of active and passive photonic integrated circuits  

E-Print Network (OSTI)

This thesis describes the development of advanced laser resonators and applications of laser-induced micromachining for photonic circuit fabrication. Two major advantages of laser-induced micromachining are direct patterning ...

Cho, Seong-Ho, 1966-

2004-01-01T23:59:59.000Z

236

A method for gridless routing of printed circuit boards  

Science Journals Connector (OSTI)

The introduction of fine-line technologies to printed circuit board design and manufacture has stretched most previous automatic routing algorithms to the limit. A different approach designed specifically to meet the present needs is detailed.

A. C. Finch; K. J. Mackenzie; G. J. Balsdon; G. Symonds

1985-06-01T23:59:59.000Z

237

Design methodologies for variation-aware integrated circuits  

E-Print Network (OSTI)

by clock distribution network and proposes techniques to reduce power/ground noise considering the effects of process variations. The second part proposes an elastic pipeline scheme for random circuits with feedback loops. The proposed scheme provides a low...

Samanta, Rupak

2009-05-15T23:59:59.000Z

238

Fault simulation of combinational circuits based on critical path tracing  

E-Print Network (OSTI)

FAULT SIMULATION Ol' COMBINATIONAI, CIRCUITS BASED ON CRITICAL PATH TRACING A Thesis by CHARLES JAMES BURNETT Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1992 Major Subject: Electrical Engineering FAULT SIIUIULATION OF COMBINATlONAL CIRCUITS BASED ON CRITICAL PATH TRACINC A Thesis CHARLES JAMES BURNETT Approved as to style and content by: Don E. Ross (Chair of Committee...

Burnett, Charles James

1992-01-01T23:59:59.000Z

239

Low Power Photomultiplier Tube Circuit And Method Thereor  

DOE Patents (OSTI)

An electrical circuit for a photomultiplier tube (PMT) is disclosed that reduces power consumption to a point where the PMT may be powered for extended periods with a battery. More specifically, the invention concerns a PMT circuit comprising a low leakage switch and a high voltage capacitor positioned between a resistive divider and each of the PMT dynodes, and a low power control scheme for recharging the capacitors.

Bochenski, Edwin B. (Tracy, CA); Skinner, Jack L. (Brentwood, CA); Dentinger, Paul M. (Sunol, CA); Lindblom, Scott C. (Tracy, CA)

2006-04-18T23:59:59.000Z

240

CLOSED CIRCUIT TELEVISION MONITORING AND RECORDING OF PUBLIC AREAS FOR SAFETY AND SECURITY PURPOSES  

E-Print Network (OSTI)

security plan using stateoftheart technology is closed circuit television (CCTV). B. The purpose of CCTV

Fang-Yen, Christopher

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Superconducting switching circuit, memory cell and memory circuit, with resonance damping resistors  

SciTech Connect

This patent describes a superconducting switching circuit comprising: first and second Josephson junction elements connected in series; first and second excitation inductors connected in series to each other and connected in series to the first and second Josephson junction elements; an exciting line magnetically coupled to the first and second excitation inductors; a load inductor having a first end connected to a connecting point of the first and second Josephson junction elements and having a second end connected to a connecting point of the first and second excitation inductors; an input signal line coupled to the load inductor; and first and second resistors connected, respectively, to a first current path including at least the first Josephson junction element and a second current path including at least the second Josephson junction element thereby effecting suppression of unwanted resonance in the current paths, wherein the first and second current paths belonging to the circuit including the first and second Josephson elements, the first and second excitation inductors and the load inductor.

Harada, Y.; Kawabe, U.; Goto, E.; Miyamoto, N.

1988-11-15T23:59:59.000Z

242

Title Author(s) Year Published Category Analysis and Design of Analog Integrated Circuits, Third Edition Gray; Meyer 1993 Circuits  

E-Print Network (OSTI)

Optics Terahertz Optoelectronics Sakai 2005 Optics / Laser Optics Advanced Optoelectronic Devices Dragoman; Dragoman 1999 Optoelectronic Devices / Packaging Optical Integrated Circuits Nishihara; Haruna; Suhara 1989 Optoelectronic Devices / Packaging Optical Networks, Second Edition Ramaswami; Sivarajan 2002

Huang, Zhaoran "Rena"

243

What can we learn from neutrinoless double beta decay experiments?  

E-Print Network (OSTI)

312 P. Vogel, Limits From Neutrinoless Double-Beta Decay (Assumptions No detected neutrinoless double ?-decay lightestscale (1 0.05 eV), No neutrinoless double ?-decay lightest

Bahcall, John N.

2009-01-01T23:59:59.000Z

244

A Search for Neutrinoless Double Beta Decay of Te-130  

E-Print Network (OSTI)

Bolometric experiments for neutrinoless double beta 3.2.1A Search for Neutrinoless Double Beta Decay of Te by AdamSpring 2010 A Search for Neutrinoless Double Beta Decay of

Bryant, Adam Douglas

2010-01-01T23:59:59.000Z

245

Neutrinoless Double Beta Decay in Light of SNO Salt Data  

E-Print Network (OSTI)

14] P. Vogel, Limits From Neutrinoless Double-Beta Decay (Higgs, can also cause neutrinoless double-beta decay (seeLBNL-53996 Neutrinoless Double Beta Decay in Light of SNO

Murayama, Hitoshi

2009-01-01T23:59:59.000Z

246

Structural design of double hull tankers  

SciTech Connect

After a brief introduction of structural design procedure for double hull tankers, their design features are firstly highlighted comparing with conventional single hull tankers. Next discussed are recent topics of double hull VLCC (Very Large Crude oil Carrier) including higher tensile steel and strut arrangement in transverse ring frames. Finally ultimate longitudinal strength of hull girder is analyzed through a simplified method under both sagging and hogging conditions. Making use of this result, some considerations are made on structural reliability of double hull VLCC.

Niho, O.; Yanagibayashi, S.; Akashi, T. [Mitsui Engineering and Shipbuilding Co., Ltd., Tokyo (Japan)

1994-12-31T23:59:59.000Z

247

Smectic Order in Double-Twist Cylinders  

E-Print Network (OSTI)

I propose a double-twist texture with local smectic order, which may have been seen in recent experiments. As in the Renn-Lubensky TGB phase, the smectic order is broken only through a lattice of screw dislocations. A melted lattice of screw dislocations can produce a double-twist texture as can an unmelted lattice. In the latter case I show that geometry only allows for certain angles between smectic regions. I discuss the possibility of connecting these double-twist tubes together to form a smectic blue phase.

Randall D. Kamien

1996-11-04T23:59:59.000Z

248

Photo double ionization of ethylene and acetylene near threshold  

E-Print Network (OSTI)

Photo double ionization of ethylene and acetylene nearcomplete measurements of the photo double ionization ofkinetic energy of the photo electrons and the nuclear

Gaire, B.

2014-01-01T23:59:59.000Z

249

National CHP Roadmap: Doubling Combined Heat and Power Capacity...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States by 2010, March 2001 National CHP Roadmap: Doubling Combined Heat and Power Capacity in the...

250

Photo double ionization of ethylene and acetylene near threshold  

E-Print Network (OSTI)

double ionization of ethylene and acetylene near thresholdphoto double ionization of ethylene (dou- ble CC bond) andsimilar yields of metastable ethylene dications produced by

Gaire, B.

2014-01-01T23:59:59.000Z

251

Molecular Dynamics Study of the Electrical Double Layer at Silver...  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Double Layer at Silver Chloride Electrolyte Interfaces. Molecular Dynamics Study of the Electrical Double Layer at Silver Chloride Electrolyte Interfaces. Abstract:...

252

Search for: "neutrinoless double beta decay" | DOE PAGES  

Office of Scientific and Technical Information (OSTI)

neutrinoless double beta decay" Find + Advanced Search Advanced Search All Fields: "neutrinoless double beta decay" Title: Full Text: Bibliographic Data: Creator Author: Name...

253

Double-Disk Dark Matter  

Science Journals Connector (OSTI)

Abstract Based on observational tests of large scale structure and constraints on halo structure, dark matter is generally taken to be cold and essentially collisionless. On the other hand, given the large number of particles and forces in the visible world, a more complex dark sector could be a reasonable or even likely possibility. This hypothesis leads to testable consequences, perhaps portending the discovery of a rich hidden world neighboring our own. We consider a scenario that readily satisfies current bounds that we call Partially Interacting Dark Matter (PIDM). This scenario contains self-interacting dark matter, but it is not the dominant component. Even if PIDM contains only a fraction of the net dark matter density, comparable to the baryonic fraction, the subdominant components interactions can lead to interesting and potentially observable consequences. Our primary focus will be the special case of Double-Disk Dark Matter (DDDM), in which self-interactions allow the dark matter to lose enough energy to lead to dynamics similar to those in the baryonic sector. We explore a simple model in which DDDM can cool efficiently and form a disk within galaxies, and we evaluate some of the possible observational signatures. The most prominent signal of such a scenario could be an enhanced indirect detection signature with a distinctive spatial distribution. Even though subdominant, the enhanced density at the center of the galaxy and possibly throughout the plane of the galaxy (depending on precise alignment) can lead to large boost factors, and could even explain a signature as large as the 130 GeV Fermi line. Such scenarios also predict additional dark radiation degrees of freedom that could soon be detectable and would influence the interpretation of future data, such as that from Planck and from the Gaia satellite. We consider this to be the first step toward exploring a rich array of new possibilities for dark matter dynamics.

JiJi Fan; Andrey Katz; Lisa Randall; Matthew Reece

2013-01-01T23:59:59.000Z

254

11.5 MATLAB Laboratory Experiment on Circuits Consider the electrical circuit presented in Figure 11.18. Assume that all resistors in the  

E-Print Network (OSTI)

11.5 MATLAB Laboratory Experiment on Circuits Consider the electrical circuit presented in Figure analysis, form the matrices j and k and the vector of initial conditions. Use MATLAB to find the currents via MATLAB, using the electrical circuit given in Figure 11.19 and the corresponding formulas

Gajic, Zoran

255

Double Beta Decay Constraint on Composite Neutrinos  

Science Journals Connector (OSTI)

......Constraint on Composite Neutrinos Eiichi Takasugi Department of Physics, Osaka University, Toyonaka 560 Neutrinoless double beta decay (betabeta)0v occurs through the magnetic coupling of dimension five operator whose coupling constant is......

Eiichi Takasugi

1997-10-01T23:59:59.000Z

256

Phenomenology of single and double diffraction dissociation  

E-Print Network (OSTI)

Predictions of the gap-probability renormalization model for single and double diffraction dissociation cross sections in proton-proton collisions at the LHC are presented and compared with recent CMS measurements.

Konstantin Goulianos

2013-10-21T23:59:59.000Z

257

Phenomenology of neutrinoless double beta decay  

E-Print Network (OSTI)

This paper reviews the current status and future outlook of neutrinoless double beta decay searches, which try to provide an answer to the fundamental question of whether neutrinos are Dirac or Majorana particles.

Gmez-Cadenas, J J

2015-01-01T23:59:59.000Z

258

Phenomenology of neutrinoless double beta decay  

E-Print Network (OSTI)

This paper reviews the current status and future outlook of neutrinoless double beta decay searches, which try to provide an answer to the fundamental question of whether neutrinos are Dirac or Majorana particles.

J. J. Gmez-Cadenas; Justo Martn-Albo

2015-02-02T23:59:59.000Z

259

Double Pomeron Physics at the LHC  

E-Print Network (OSTI)

I discuss central exclusive production, otherwise known as Double Pomeron Exchange, DPE, from the ISR through the Tevatron to the LHC. There I emphasize the interest of exclusive Higgs and WW/ZZ production.

Michael G. Albrow

2005-07-25T23:59:59.000Z

260

Neutrinoless double beta decay with scalar bilinears  

E-Print Network (OSTI)

One possible probe to physics beyond the standard model is to look for scalar bilinears, which couple to two fermions of the standard model. We point out that the scalar bilinears allow new diagrams contributing to the neutrinoless double beta decay. The upper bound on the neutrinoless double beta decay lifetime would then give new constraints on the ratio of the masses of these scalars to their couplings to the fermions.

H. V. Klapdor-Kleingrothaus; U. Sarkar

2002-11-18T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Wavelength-doubling optical parametric oscillator  

DOE Patents (OSTI)

A wavelength-doubling optical parametric oscillator (OPO) comprising a type II nonlinear optical medium for generating a pair of degenerate waves at twice a pump wavelength and a plurality of mirrors for rotating the polarization of one wave by 90 degrees to produce a wavelength-doubled beam with an increased output energy by coupling both of the degenerate waves out of the OPO cavity through the same output coupler following polarization rotation of one of the degenerate waves.

Armstrong, Darrell J. (Albuquerque, NM); Smith, Arlee V. (Albuquerque, NM)

2007-07-24T23:59:59.000Z

262

Double shell tank waste analysis plan  

SciTech Connect

Waste analysis plan for the double shell tanks. SD-WM-EV-053 is Superseding SD-WM-EV-057.This document provides the plan for obtaining information needed for the safe waste handling and storage of waste in the Double Shell Tank Systems. In Particular it addresses analysis necessary to manage waste according to Washington Administrative Code 173-303 and Title 40, parts 264 and 265 of the Code of Federal Regulations.

Mulkey, C.H.; Jones, J.M.

1994-12-15T23:59:59.000Z

263

Attachment method for stacked integrated circuit (IC) chips  

DOE Patents (OSTI)

An attachment method for stacked integrated circuit (IC) chips. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM.

Bernhardt, Anthony F. (Berkeley, CA); Malba, Vincent (Livermore, CA)

1999-01-01T23:59:59.000Z

264

Attachment method for stacked integrated circuit (IC) chips  

DOE Patents (OSTI)

An attachment method for stacked integrated circuit (IC) chips is disclosed. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM. 12 figs.

Bernhardt, A.F.; Malba, V.

1999-08-03T23:59:59.000Z

265

Dual-circuit embossed-sheet heat-transfer panel  

DOE Patents (OSTI)

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed for form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet.

Morgan, G.D.

1982-08-23T23:59:59.000Z

266

DSOPilot project Automatic receipt of short circuiting indicators (Smart  

Open Energy Info (EERE)

DSOPilot project Automatic receipt of short circuiting indicators (Smart DSOPilot project Automatic receipt of short circuiting indicators (Smart Grid Project) Jump to: navigation, search Project Name DSOPilot project Automatic receipt of short circuiting indicators Country Denmark Coordinates 56.26392°, 9.501785° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.26392,"lon":9.501785,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

267

Cable Hot Shorts and Circuit Analysis in Fire Risk Assessment  

SciTech Connect

Under existing methods of probabilistic risk assessment (PRA), the analysis of fire-induced circuit faults has typically been conducted on a simplistic basis. In particular, those hot-short methodologies that have been applied remain controversial in regards to the scope of the assessments, the underlying methods, and the assumptions employed. To address weaknesses in fire PRA methodologies, the USNRC has initiated a fire risk analysis research program that includes a task for improving the tools for performing circuit analysis. The objective of this task is to obtain a better understanding of the mechanisms linking fire-induced cable damage to potentially risk-significant failure modes of power, control, and instrumentation cables. This paper discusses the current status of the circuit analysis task.

LaChance, Jeffrey; Nowlen, Steven P.; Wyant, Frank

1999-05-19T23:59:59.000Z

268

Reduced circuit implementation of encoder and syndrome generator  

DOE Patents (OSTI)

An error correction method and system includes an Encoder and Syndrome-generator that operate in parallel to reduce the amount of circuitry used to compute check symbols and syndromes for error correcting codes. The system and method computes the contributions to the syndromes and check symbols 1 bit at a time instead of 1 symbol at a time. As a result, the even syndromes can be computed as powers of the odd syndromes. Further, the system assigns symbol addresses so that there are, for an example GF(2.sup.8) which has 72 symbols, three (3) blocks of addresses which differ by a cube root of unity to allow the data symbols to be combined for reducing size and complexity of odd syndrome circuits. Further, the implementation circuit for generating check symbols is derived from syndrome circuit using the inverse of the part of the syndrome matrix for check locations.

Trager, Barry M; Winograd, Shmuel

2014-05-27T23:59:59.000Z

269

Computer code for double beta decay QRPA based calculations  

E-Print Network (OSTI)

. The Enriched Xenon Observatory for neutrinoless double beta decay (EXO) will search for the rare decays

Bertulani, Carlos A. - Department of Physics and Astronomy, Texas A&M University

270

Transient recovery voltage considerations in the application of medium voltage circuit breakers  

SciTech Connect

Medium Voltage Circuit Breakers can fail to interrupt 3-phase fault currents when power systems have Transient Recovery Voltage (TRV) characteristics which exceed the rating of the circuit breaker. This paper examines the application of 13.8kV generation and load switchgear for an oil refinery in which circuit parameters as originally designed would have exceeded the 13.8kV circuit breakers TRV ratings had corrective measures not been taken. This paper illustrates this case and discusses the basis of TRV, how TRV is assessed, and alternative actions taken to bring circuits to within the 13.8 kV circuit breaker ratings.

Swindler, D.L.; Schwartz, P.; Hamer, P.S.; Lambert, S.R.

1995-12-31T23:59:59.000Z

271

Synthesis of Ternary Quantum Logic Circuits by Decomposition  

E-Print Network (OSTI)

Recent research in multi-valued logic for quantum computing has shown practical advantages for scaling up a quantum computer. Multivalued quantum systems have also been used in the framework of quantum cryptography, and the concept of a qudit cluster state has been proposed by generalizing the qubit cluster state. An evolutionary algorithm based synthesizer for ternary quantum circuits has recently been presented, as well as a synthesis method based on matrix factorization.In this paper, a recursive synthesis method for ternary quantum circuits based on the Cosine-Sine unitary matrix decomposition is presented.

Faisal Shah Khan; Marek Perkowski

2005-11-04T23:59:59.000Z

272

Aluminum nitride nanophotonic circuits operating at ultraviolet wavelengths  

SciTech Connect

Aluminum nitride (AlN) has recently emerged as a promising material for integrated photonics due to a large bandgap and attractive optical properties. Exploiting the wideband transparency, we demonstrate waveguiding in AlN-on-Insulator circuits from near-infrared to ultraviolet wavelengths using nanophotonic components with dimensions down to 40?nm. By measuring the propagation loss over a wide spectral range, we conclude that both scattering and absorption of AlN-intrinsic defects contribute to strong attenuation at short wavelengths, thus providing guidelines for future improvements in thin-film deposition and circuit fabrication.

Stegmaier, M.; Ebert, J.; Pernice, W. H. P., E-mail: wolfram.pernice@kit.edu [Institute of Nanotechnology, Karlsruhe Institute of Technology, 76133 Karlsruhe (Germany); Meckbach, J. M.; Ilin, K.; Siegel, M. [Institute of Micro- und Nanoelectronic Systems, Karlsruhe Institute of Technology, 76187 Karlsruhe (Germany)

2014-03-03T23:59:59.000Z

273

Base drive circuit for a four-terminal power Darlington  

DOE Patents (OSTI)

A high power switching circuit which utilizes a four-terminal Darlington transistor block to improve switching speed, particularly in rapid turn-off. Two independent reverse drive currents are utilized during turn off in order to expel the minority carriers of the Darlington pair at their own charge sweep-out rate. The reverse drive current may be provided by a current transformer, the secondary of which is tapped to the base terminal of the power stage of the Darlington block. In one application, the switching circuit is used in each power switching element in a chopper-inverter drive of an electric vehicle propulsion system.

Lee, Fred C. (Blacksburg, VA); Carter, Roy A. (Salem, VA)

1983-01-01T23:59:59.000Z

274

Integration of III-V materials with silicon for optoelectronic integrated circuit applications  

E-Print Network (OSTI)

S. P. Ahrenkiel and M. W. Wanlass, InGaAs/InP doubleS. P. Ahrenkiel and M. W. Wanlass, InGaAs/InP doubleS. P. Ahrenkiel and M. W. Wanlass, InGaAs/InP double

Chen, Peng

2008-01-01T23:59:59.000Z

275

Well-Passivated a-Si:H Back Contacts for Double-Heterojunction Silicon Solar Cells: Preprint  

SciTech Connect

We have developed hydrogenated amorphous silicon (a Si:H) back contacts to both p- and n-type silicon wafers, and employed them in double-heterojunction solar cells. These contacts are deposited entirely at low temperature (<250 C) and replace the standard diffused or alloyed back-surface-field contacts used in single-heterojunction (front-emitter only) cells. High-quality back contacts require excellent surface passivation, indicated by a low surface recombination velocity of minority-carriers (S) or a high open-circuit voltage (Voc). The back contact must also provide good conduction for majority carriers to the external circuit, as indicated by a high light I-V fill factor. We use hot-wire chemical vapor deposition (HWCVD) to grow a-Si:H layers for both the front emitters and back contacts. Our improved a-Si:H back contacts contribute to our recent achievement of a confirmed 18.2% efficiency in double-heterojunction silicon solar cells on p type textured silicon wafers.

Page, M. R.; Iwaniczko, E.; Xu, Y.; Wang, Q.; Yan, Y.; Roybal, L.; Branz, H. M.; Wang, T. H.

2006-05-01T23:59:59.000Z

276

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 9950 of 31,917 results. 41 - 9950 of 31,917 results. Download Cover Letter for Motion to Intervene and Comments of the District of Columbia Government http://energy.gov/oe/downloads/cover-letter-motion-intervene-and-comments-district-columbia-government Download Further Notice of 230kV Circuit Planned Outages http://energy.gov/oe/downloads/further-notice-230kv-circuit-planned-outages Download Preliminary Comments on Compliance Plan and Request for Clarification or, in the Alternative, Rehearing of the District of Columbia Public Service Commission http://energy.gov/oe/downloads/preliminary-comments-compliance-plan-and-request-clarification-or-alternative-rehearing Download Trona Injection Tests: Mirant Potomac River Station, Unit 1, November 12 to December 23, 2005, Summary Report

277

Precision Muon Reconstruction in Double Chooz  

E-Print Network (OSTI)

We describe a muon track reconstruction algorithm for the reactor anti-neutrino experiment Double Chooz. The Double Chooz detector consists of two optically isolated volumes of liquid scintillator viewed by PMTs, and an Outer Veto above these made of crossed scintillator strips. Muons are reconstructed by their Outer Veto hit positions along with timing information from the other two detector volumes. All muons are fit under the hypothesis that they are through-going and ultrarelativistic. If the energy depositions suggest that the muon may have stopped, the reconstruction fits also for this hypothesis and chooses between the two via the relative goodness-of-fit. In the ideal case of a through-going muon intersecting the center of the detector, the resolution is ~40 mm in each transverse dimension. High quality muon reconstruction is an important tool for reducing the impact of the cosmogenic isotope background in Double Chooz.

Abe, Y; Barriere, J C; Baussan, E; Bekman, I; Bergevin, M; Bezerra, T J C; Bezrukov, L; Blucher, E; Buck, C; Busenitz, J; Cabrera, A; Caden, E; Camilleri, L; Carr, R; Cerrada, M; Chang, P -J; Chauveau, E; Chimenti, P; Collin, A P; Conover, E; Conrad, J M; Crespo-Anadn, J I; Crum, K; Cucoanes, A; Damon, E; Dawson, J V; Dietrich, D; Djurcic, Z; Dracos, M; Elnimr, M; Etenko, A; Fallot, M; von Feilitzsch, F; Felde, J; Fernandes, S M; Fischer, V; Franco, D; Franke, M; Furuta, H; Gil-Botella, I; Giot, L; Gger-Neff, M; Gonzalez, L F G; Goodenough, L; Goodman, M C; Grant, C; Haag, N; Hara, T; Haser, J; Hofmann, M; Horton-Smith, G A; Hourlier, A; Ishitsuka, M; Jochum, J; Jollet, C; Kaether, F; Kalousis, L N; Kamyshkov, Y; Kaplan, D M; Kawasaki, T; Kemp, E; de Kerret, H; Kryn, D; Kuze, M; Lachenmaier, T; Lane, C E; Lasserre, T; Letourneau, A; Lhuillier, D; Lima, H P; Lindner, M; no, J M Lpez-Casta; LoSecco, J M; Lubsandorzhiev, B; Lucht, S; Maeda, J; Mariani, C; Maricic, J; Martino, J; Matsubara, T; Mention, G; Meregaglia, A; Miletic, T; Milincic, R; Minotti, A; Nagasaka, Y; Nikitenko, Y; Novella, P; Obolensky, M; Oberauer, L; Onillon, A; Osborn, A; Palomares, C; Pepe, I M; Perasso, S; Pfahler, P; Porta, A; Pronost, G; Reichenbacher, J; Reinhold, B; Rhling, M; Roncin, R; Roth, S; Rybolt, B; Sakamoto, Y; Santorelli, R; Schilithz, A C; Schnert, S; Schoppmann, S; Shaevitz, M H; Sharankova, R; Shimojima, S; Sibille, V; Sinev, V; Skorokhvatov, M; Smith, E; Spitz, J; Stahl, A; Stancu, I; Stokes, L F F; Strait, M; Stken, A; Suekane, F; Sukhotin, S; Sumiyoshi, T; Sun, Y; Svoboda, R; Terao, K; Tonazzo, A; Thi, H H Trinh; Valdiviesso, G; Vassilopoulos, N; Veyssiere, C; Vivier, M; Wagner, S; Watanabe, H; Wiebusch, C; Winslow, L; Wurm, M; Yang, G; Yermia, F; Zimmer, V

2014-01-01T23:59:59.000Z

278

The double-arm barn door tracker  

NLE Websites -- All DOE Office Websites (Extended Search)

How to build a double-arm barn door tracker How to build a double-arm barn door tracker | Jefferson Lab Home Page | Science Education Home Page | Construction Notes/Photos Page | Sources: Sky & Telescope April 1989 (p436 - p441) [very good] Sky & Telescope February 1988 (p213 - p214) Original concept by Dave Trott A single-arm barn door tracker, driven by a straight screw, accumulates tangent error as time passes. Most of this error can be eliminated by adding a second hinged arm to the standard arrangement. There are four types of double-arm trackers, each with a different geometry. A comparison of accumulated error (in arc seconds) and construction parameters is given below: Error Chart [Apparently Type 1 is very bad and not worth constructing?? The two Type 4 drives vary in beta. This results in shifting the region of maximum error

279

DNA Assembly Method Standardization for Synthetic Biomolecular Circuits and Systems  

Science Journals Connector (OSTI)

Simply put, the DNA assembly challenge is to take a set of double-stranded DNA fragments, and physically (as well as ... to yield a single, potentially circular, assembled DNA sequence. These DNA sequence fragmen...

Nathan J. Hillson

2011-01-01T23:59:59.000Z

280

Bridge Fault Simulation Strategies for CMOS Integrated Circuits Brian Chess  

E-Print Network (OSTI)

Bridge Fault Simulation Strategies for CMOS Integrated Circuits Brian Chess Tracy Larrabee \\Lambda the Primitive Bridge Function, a char­ acteristic function describing the behavior of bridged com­ ponents, we present a theorem for detecting feedback bridge faults. We discuss two different methods of bridge fault

Larrabee, Tracy

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Pulse and Hold Switching Current Readout of Superconducting Quantum Circuits  

E-Print Network (OSTI)

;#12;Abstract Josephson junction qubits are promising candidates for a scalable quantum processor. Such qubits on the switching of a Josephson junction from the zero voltage state to a finite voltage state. The Josephson a switching current detector by analyzing the phase space of a Josephson junction circuit with frequency

Haviland, David

282

Devices and Circuits for Nanoelectronic Implementation of Artificial Neural Networks  

E-Print Network (OSTI)

Devices and Circuits for Nanoelectronic Implementation of Artificial Neural Networks A Dissertation Implementation of Artificial Neural Networks by ¨Ozg¨ur T¨urel Doctor of Philosophy in Physics and Astronomy. Unfortunately, most artificial neural networks, either software or hardware, do not provide either the speed

283

Snubber circuit designed for electric car drive system  

Science Journals Connector (OSTI)

This article presents a method to develop the speed-controller dc-motor chopper drive system by using mosfet as the switching drive for motor speed control. The switching current during ton state, and toff state of the mosfet can cause power ... Keywords: chopper, electric drive, mosfet, parallel connected, power dissipation, snubber circuit

Sakrawee Raweekul

2012-01-01T23:59:59.000Z

284

Identifying Proxy Nodes in a Tor Anonymization Circuit Sambuddho Chakravarty  

E-Print Network (OSTI)

agnostic Onion Routing scheme [11] to anonymize the traffic. The strength of the scheme is the use is vulnerable to traffic analysis at- tacks. These attacks can expose the identity of a Tor client or of the proxy nodes used in an anonymous Tor circuit when an adversary can manipulate the traffic entering

Yang, Junfeng

285

Paraffinic versus naphthenic oils for power circuit breaker applications  

SciTech Connect

Tests comparing paraffinic and naphthenic crude-based insulating oils revealed no significant differences in the mechanical operation of an oil circuit breaker using the two oils. However, the higher pour point, longer carbon-setting rate, and lower gas generation of the paraffinic oil could affect a breaker's insulating and interrupting performance.

Sloat, T.K.; Martello, N.E.; Benish, E.A.; Donohue, E.P.; Tragesser, C.W.; Zinchuk, T.C.

1986-01-01T23:59:59.000Z

286

Analogue Circuit Control through Gene Kester Clegg, Susan Stepney  

E-Print Network (OSTI)

offer an intriguing plat- form for automated design by evolutionary algorithms. Like previous evolvable) or adaptable control (homoeostasis). 1 Background and motivation We present a system for the automated example, ana- logue filters) are modelled as `genes'. Genes are `expressed' in response to circuit output

Stepney, Susan

287

A structural approach to delay optimization in combinational circuits  

E-Print Network (OSTI)

about the area penalty incurred due to delay optimization. The experiments were performed on a SPARC-20 workstation. 1. Comparison with Delay Optimization Script in SIS 1. 3 We applied LOD to the two-input gate versions of the benchmark circuits...

Munshi, Avinash

1999-01-01T23:59:59.000Z

288

Compensated count-rate circuit for radiation survey meter  

DOE Patents (OSTI)

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for counting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensated circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, Richard A. (Powell, TN)

1981-01-01T23:59:59.000Z

289

Compensated count-rate circuit for radiation survey meter  

DOE Patents (OSTI)

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for couting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensation circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, R.A.

1980-05-12T23:59:59.000Z

290

MORPHOLOGY DEPENDENT SHORT CIRCUIT CURRENT IN BULK HETEROJUNCTION SOLAR CELL  

E-Print Network (OSTI)

a relatively inexpensive option for the future solar cell technology, provided its efficiency increases beyondMORPHOLOGY DEPENDENT SHORT CIRCUIT CURRENT IN BULK HETEROJUNCTION SOLAR CELL Biswajit Ray, Pradeep, West Lafayette, Indiana, USA ABSTRACT Polymer based bulk heterostructure (BH) solar cell offers

Alam, Muhammad A.

291

Course Outline ENG 2MM3 Electrical Circuits & Power  

E-Print Network (OSTI)

-Phase Induction Motor; 5. DC Generators & DC Motors; 6. Efficiency/Heating of Electric Machines; 7. ActiveCourse Outline ENG 2MM3 Electrical Circuits & Power Winter 2010 Instructor: Prof. Matiar Howlader Web Page: www.ece.mcmaster.ca/~mrhowlader/ENG2MM3Notes Text Books: 1. Electrical Power and Controls

Haykin, Simon

292

Course Outline ENG 2MM3 Electrical Circuits & Power  

E-Print Network (OSTI)

-Phase Induction Motor; 5. DC Generators & DC Motors; 6. Efficiency/Heating of Electric Machines; 7. ActiveCourse Outline ENG 2MM3 Electrical Circuits & Power Fall 2010 Instructor: Prof. Matiar Howlader Web Page: www.ece.mcmaster.ca/~mrhowlader/ENG2MM3Notes Text Books: 1. Electrical Power and Controls

Haykin, Simon

293

Embedded-Circuit Magnetic Metamaterial Substrate Performance for Patch Antennas  

E-Print Network (OSTI)

Embedded-Circuit Magnetic Metamaterial Substrate Performance for Patch Antennas Kevin Buell and Computer Science University of Michigan Ann Arbor, MI 48109-2122, USA E-mail: kbuell@umich.edu, hosseinm@umich.edu, saraband@eecs.umicb.edu Abstract Magnetic permeabilitywas imparted to a naturally non-magnetic materialby

Sarabandi, Kamal

294

Generating Probability Distributions using Multivalued Stochastic Relay Circuits  

E-Print Network (OSTI)

Generating Probability Distributions using Multivalued Stochastic Relay Circuits David Lee Dept as well as for generating arbitrary distributions from unbiased bits. An equally interesting, but less networks that generate arbitrary probability distributions in an optimal way? In this paper, we study

Bruck, Jehoshua (Shuki)

295

AVOIDING ILLEGAL STATES IN PSEUDORANDOM TESTING OF DIGITAL CIRCUITS  

E-Print Network (OSTI)

94305-9020 Abstract: Many digital circuits have constraints on the logic values a set of signal lines test results. Our techniques require minimal change to the design and impose almost negligible delay overhead. Simulation results show that the area overhead of our techniques is less than 1% for applying

Stanford University

296

Design Approaches to Field-Programmable Analog Integrated Circuits  

Science Journals Connector (OSTI)

The drive towards shorter design cycles for analog integrated circuits has given impetus to several developments in the area of Field-Programmable Analog Arrays (FPAAs). Various approaches have been taken in implementing structural and parametric programmability ... Keywords: FPAA, FPGA, FPMA, IC, analog CAD, field-programmable, mixed-signal IC, programmable analog

Dean R. DMello; P. Glenn Gulak

1998-09-01T23:59:59.000Z

297

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS  

E-Print Network (OSTI)

AUTOMATED LOGIC SYNTHESIS OF RANDOM PATTERN TESTABLE CIRCUITS Nur A. Touba and Edward J. Mc during logic synthesis. An automated logic synthesis procedure is described which takes as an input a two. The approach taken in this paper is to consider random pattern testability during logic synthesis. An automated

Touba, Nur A.

298

Single-Molecule Circuits with Well-Defined Molecular Conductance  

E-Print Network (OSTI)

Single-Molecule Circuits with Well-Defined Molecular Conductance Latha Venkataraman,*,,| Jennifer E conductance measurements of single molecules. For an alkane diamine series with 2-8 carbon atoms leads to well-defined conductance measurements of a single molecule junction in a statistical study

Hone, James

299

Circuit Area Optimization in Energy Temporal Sparse Scenarios for  

E-Print Network (OSTI)

Circuit Area Optimization in Energy Temporal Sparse Scenarios for Multiple Harvester Powered.alarcon@upc.edu Abstract--Multi-source energy harvesters are gaining interest as a robust alternative to power wireless sensors, since the sensor node can maintain its operation regardless of the fact that one of its energy

Politècnica de Catalunya, Universitat

300

Movement Generation with Circuits of Spiking Prashant Joshi, Wolfgang Maass  

E-Print Network (OSTI)

no. 2953 Movement Generation with Circuits of Spiking Neurons Prashant Joshi, Wolfgang Maass be trained to generate basic arm movements. Such movement generation is independent of the arm-model used of a two-jointed arm, a standard model from robotics and a standard model from biology, that each generate

Koch, Christof

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

GRPlacer: improving routability and wire-length of global routing with circuit replacement  

Science Journals Connector (OSTI)

Placement profoundly impacts physical design owing to its role in determining the lower bound of a circuit wirelength, as well as the circuit routability. To close the gap between placement and routing, this study integrates global routing and placement ...

Ke-Ren Dai; Chien-Hung Lu; Yih-Lang Li

2009-11-01T23:59:59.000Z

302

Artificial Neural Network Models for the Gap Discontinuities in Stripline Circuits  

Science Journals Connector (OSTI)

Gap discontinuities appear in many stripline circuits, such as the multilayer microwave monolithic ICs and the interconnect systems in high-speed digital circuits. In this paper, a multilayer perceptron neural...

Bing-Zhong Wang; Jingsong Hong

2000-05-01T23:59:59.000Z

303

A retrot current sensor for non-intrusive power monitoring at the circuit breaker  

E-Print Network (OSTI)

This thesis presents a new sensor for power monitoring that measures current flow in a circuit breaker without permanent modification of the breaker panel or the circuit breaker itself. At the breaker panel, an inductive ...

Vickery, Daniel Robert

2011-01-01T23:59:59.000Z

304

Buffer insertion in large circuits using look-ahead and back-off techniques  

E-Print Network (OSTI)

Buffer insertion is an essential technique for reducing interconnect delay in submicron circuits. Though it is a well researched area, there is a need for robust and effective algorithms to perform buffer insertion at the circuit level. This thesis...

Waghmode, Mandar

2007-04-25T23:59:59.000Z

305

Voltage and Timing Adaptation for Variation and Aging Tolerance in Nanometer VLSI Circuits  

E-Print Network (OSTI)

Process variations and circuit aging continue to be main challenges to the power-efficiency of VLSI circuits, as considerable power budget must be allocated at design time to mitigate timing variations. Modern designs incorporate adaptive techniques...

Shim, Kyu-Nam 1978-

2012-09-10T23:59:59.000Z

306

Hierarchical Mixed-Domain Circuit Simulation, Synthesis and Extraction Methodology for MEMS  

Science Journals Connector (OSTI)

Emerging results for mixed-domain circuit simulation, a component-level synthesis strategy, and a layout extractor is presented for use in design of microelectromechanical systems (MEMS). The mixed-domain circuit representation is based on Kirchhoffian ...

Tamal Mukherjee; Gary K. Fedder

1999-07-01T23:59:59.000Z

307

Modeling quantum noise for efficient testing of fault-tolerant circuits  

E-Print Network (OSTI)

Understanding fault-tolerant properties of quantum circuits is important for designing large-scale quantum information processors. In particular, simulating properties of encoded circuits is a crucial tool for investigating ...

Magesan, Easwar

308

Commercialization of low temperature copper thermocompression bonding for 3D integrated circuits .  

E-Print Network (OSTI)

??Wafer bonding is a key process and enabling technology for realization of three-dimensional integrated circuits (3DIC) with reduced interconnect delay and correspondingly increased circuit speed (more)

Nagarajan, Raghavan

2008-01-01T23:59:59.000Z

309

Commercialization of low temperature copper thermocompression bonding for 3D integrated circuits  

E-Print Network (OSTI)

Wafer bonding is a key process and enabling technology for realization of three-dimensional integrated circuits (3DIC) with reduced interconnect delay and correspondingly increased circuit speed and decreased power ...

Nagarajan, Raghavan

2008-01-01T23:59:59.000Z

310

Gate-diffusion input (GDI): a power-efficient method for digital combinatorial circuits  

Science Journals Connector (OSTI)

Gate diffusion input (GDI) - a new technique of low-power digital combinatorial circuit design - is described. This technique allows reducing power consumption, propagation delay, and area of digital circuits while maintaining low complexity of logic ...

A. Morgenshtein; A. Fish; I. A. Wagner

2002-10-01T23:59:59.000Z

311

A basal ganglia-forebrain circuit in the songbird biases motor output to avoid vocal errors  

E-Print Network (OSTI)

In songbirds, as in mammals, basal ganglia-forebrain circuits are necessary for the learning and production of complex motor behaviors; however, the precise role of these circuits remains unknown. It has recently been shown ...

Andalman, Aaron S.

312

E-Print Network 3.0 - auto-regulatory circuit deactivator Sample...  

NLE Websites -- All DOE Office Websites (Extended Search)

voltage VTH is the open-circuit voltage. (d). T F Superposition... the 10 k resistor in the circuit given below. Draw a small sketch of each transformation you make. i1...

313

On the neutrinoless double ?{sup +}/EC decays  

SciTech Connect

The neutrinoless double positron-emission/electron-capture (0??{sup +}/EC) decays are studied for the magnitudes of the involved nuclear matrix elements (NMEs). Decays to the ground state, 0{sub gs}{sup +}, and excited 0{sup +} states are discussed. The participant many-body wave functions are evaluated in the framework of the quasiparticle random-phase approximation (QRPA). Effective, G-matrix-derived nuclear forces are used in realistic single-particle model spaces. The channels ?{sup +}?{sup +}, ?{sup +}EC, and the resonant neutrinoless double electron capture (R0?ECEC) are discussed.

Suhonen, Jouni [Department of Physics, P.O. Box 35 (YFL), FI-40014 University of Jyvskyl (Finland)

2013-12-30T23:59:59.000Z

314

Logic Synthesis Techniques for Reduced Area Implementation of Multilevel Circuits with Concurrent Error Detection  

E-Print Network (OSTI)

on using automated logic synthesis techniques (such as those used in MIS [1]) to design multilevel circuits

McCluskey, Edward J.

315

High-Temperature Circuit Boards for Use in Geothermal Well Monitoring Applications  

Energy.gov (U.S. Department of Energy (DOE))

Project objective: Develop and demonstrate high-temperature; multilayer electronic circuits capable of sustained operation at 300? C.

316

The analysis of circuit breakers kinematics characteristics using the artificial neural networks  

Science Journals Connector (OSTI)

The paper presents the required parameters in the evaluation of the technical state for the High Voltage (HV) circuit breakers. It details some aspects regarding the influence of the kinematics characteristics to the circuit breakers performances. Also, ... Keywords: artificial neural network, circuit breaker, diagnostic, kinematics characteristics, modelling and simulation, monitoring

Maricel Adam; Adrian Baraboi; Catalin Pancu; Sorin Pispiris

2009-02-01T23:59:59.000Z

317

Statistical Estimation of Circuit Timing Vulnerability Due to Leakage-Induced Power Grid Voltage Drop  

E-Print Network (OSTI)

Statistical Estimation of Circuit Timing Vulnerability Due to Leakage-Induced Power Grid Voltage voltage drops on the power grid that can affect circuit timing. We propose a statistical analysis supply voltage to circuit devices is referred to as the power grid. The consequences of power grid

Najm, Farid N.

318

PROTON EXCHANGE MEMBRANE FUEL CELL OPERATION AND DEGRADATION IN SHORT-CIRCUIT  

E-Print Network (OSTI)

PROTON EXCHANGE MEMBRANE FUEL CELL OPERATION AND DEGRADATION IN SHORT-CIRCUIT R.E. Silvaa, b, d , F exchange membrane fuel cells, short circuit, degradation mechanism, electrochemical impedance spectroscopy an electrical short circuit of a proton exchange membrane fuel cell stack. The physical quantities in the fuel

Boyer, Edmond

319

SO8 IEEE PHOTONICS TECHNOLOGY LETTERS. VOL. 7 , NO. S. MAY 1995 Monolithic Optoelectronic Circuit Design  

E-Print Network (OSTI)

SO8 IEEE PHOTONICS TECHNOLOGY LETTERS. VOL. 7 , NO. S. MAY 1995 Monolithic Optoelectronic Circuit optoelectronic integration technique was proposed based on this circuit stability and consequently the monolithic integration of LED's and GaAs circuits by molecular beam epitaxial (MBE) growth, to form an optoelectronic

Shenoy, Krishna V.

320

Optimal Part and Module Selection for Synthetic Gene Circuit Design Automation  

Science Journals Connector (OSTI)

Optimal Part and Module Selection for Synthetic Gene Circuit Design Automation ... A step toward automated synthetic circuit design is the selection of a part set so that the final circuit exhibits the desired behavior. ... Our workflow is the first to automate the prodn. of biol. ...

Linh Huynh; Ilias Tagkopoulos

2014-01-28T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Asynchronous Gate-Diffusion----Input (GDI) Circuits Arkadiy Morgenshtein, Michael Moreinis and Ran Ginosar  

E-Print Network (OSTI)

1 Asynchronous Gate-Diffusion----Input (GDI) Circuits Arkadiy Morgenshtein, Michael Moreinis, Israel [ran@ee.technion.ac.il] Abstract: Novel Gate-Diffusion Input (GDI) circuits are applied to asynchronous design. A variety of GDI implementations are compared with typical CMOS asynchronous circuits

Ginosar, Ran

322

Power Electronics' Circuit Topology the Basic Switching Cells Fang Z. Peng Leon M. Tolbert, Faisal Khan  

E-Print Network (OSTI)

be obtained for the construction and decomposition of existing power electronic circuits. New power conversion, inverter, N- cell, P-cell. I. INTRODUCTION Power electronic circuits that range from dc-dc, ac-dc, dc- acPower Electronics' Circuit Topology ­ the Basic Switching Cells Fang Z. Peng Leon M. Tolbert

Tolbert, Leon M.

323

Solution of Large Transmission Line Type Circuits Using a New Optimized Waveform Relaxation Partitioning  

E-Print Network (OSTI)

Solution of Large Transmission Line Type Circuits Using a New Optimized Waveform Relaxation. However, so far the partitioning of strongly coupled circuits like transmission lines has been di#cult. We. We analyze convergence for the case of a transmission line type circuit and illustrate the method

Gander, Martin J.

324

Students' understanding of direct current resistive electrical circuits Paula Vetter Engelhardta)  

E-Print Network (OSTI)

Students' understanding of direct current resistive electrical circuits Paula Vetter Engelhardta regarding direct current resistive electric circuits often differ from the accepted explanations. At present of direct cur- rent DC resistive electric circuits concepts. DIRECT has been designed for use with high

Zollman, Dean

325

A Microscopic Double-Slit Experiment  

NLE Websites -- All DOE Office Websites (Extended Search)

A Microscopic Double-Slit A Microscopic Double-Slit Experiment A Microscopic Double-Slit Experiment Print Wednesday, 29 February 2012 00:00 Two centuries ago, Thomas Young performed the classic demonstration of the wave nature of light. He placed a screen with two tiny slits in front of a single light source, effectively converting it into a two-centered source. On a second screen far away, he saw a pattern of light and dark diffraction fringes, a well-known hallmark of wave interference. Along with later studies using particles instead of light, the experiment played a crucial role in establishing the validity of wave-particle duality, a puzzling concept that has ultimately become central to the interpretation of complementarity in quantum mechnanics. In a new twist on this classic experiment, the double slit (with light waves) has been replaced by a diatomic molecule (with electron waves). At ALS Beamline 10.0.1, researchers have shown that diatomic molecules can serve as two-center emitters of electron waves and that traces of electron-wave interference can be directly observed in precise measurements of vibrationally resolved photoionization spectra.

326

Parameterized Algorithms for Double Hypergraph Dualization with  

E-Print Network (OSTI)

as Sperner families.) The support of a hypergraph is the set of all vertices covered by edges, the remaining sets in graphs are also known as vertex covers. We consider the following two operators on hypergraphsParameterized Algorithms for Double Hypergraph Dualization with Rank Limitation and Maximum Minimal

Damaschke, Peter

327

Double tracks test site characterization report  

SciTech Connect

This report presents the results of site characterization activities performed at the Double Tracks Test Site, located on Range 71 North, of the Nellis Air Force Range (NAFR) in southern Nevada. Site characterization activities included reviewing historical data from the Double Tracks experiment, previous site investigation efforts, and recent site characterization data. The most recent site characterization activities were conducted in support of an interim corrective action to remediate the Double Tracks Test Site to an acceptable risk to human health and the environment. Site characterization was performed using a phased approach. First, previously collected data and historical records sere compiled and reviewed. Generalized scopes of work were then prepared to fill known data gaps. Field activities were conducted and the collected data were then reviewed to determine whether data gaps were filled and whether other areas needed to be investigated. Additional field efforts were then conducted, as required, to adequately characterize the site. Characterization of the Double Tracks Test Site was conducted in accordance with the US Department of Energy`s (DOE) Streamlined Approach for Environmental Restoration (SAFER).

NONE

1996-05-01T23:59:59.000Z

328

Apparent Double SiO Maser Sources  

Science Journals Connector (OSTI)

......to 3 Jy with four 20-m antennas (Miyoshi 1998, a poster paper at JAS meeting). The double SiO sources found...Research (C) (No. 10640238) of the Ministry of Education, Science, Sports and Culture. One of authors (SD) received......

Shuji Deguchi; Takahiro Fujii; Hideyuki Izumiura; Shigeru Matsumoto; Yoshikazu Nakada; Peter R. Wood; Issei Yamamura

1999-06-01T23:59:59.000Z

329

Fatigue analysis for double hull VLCC  

SciTech Connect

This paper presents the procedure and the results of fatigue analysis forming a part of Dynamic Load Approach (DLA) applied for 280,000 DWT double hull VLCC, classed with DLA notation by American Bureau of Shipping. The spectral fatigue analysis is applied to the above vessel, and the fatigue strength is confirmed to be sufficient.

Kawachi, S.; Kushima, T.; Negayama, H.; Shigematsu, K. [Sumitomo Heavy Industries, Ltd., Yokosuka (Japan)

1994-12-31T23:59:59.000Z

330

Pion double charge exchange and hadron dynamics  

SciTech Connect

This paper will review theoretical results to show how pion double charge exchange is contributing to our understanding of hadron dynamics in nuclei. The exploitation of the nucleus as a filter is shown to be essential in facilitating the comparison between theory and experiment. 23 refs., 3 figs., 2 tabs.

Johnson, M.B.

1991-01-01T23:59:59.000Z

331

Neutrinoless Double $?$-Decay: Status and Future  

E-Print Network (OSTI)

A brief summary of the status of neutrino masses, mixing and oscillations is presented. Neutrinoless double $\\beta$-decay is considered. Predictions for the effective Majorana mass are reviewed. A possible test of the calculations of nuclear matrix elements of the $0\

S. M. Bilenky

2005-09-11T23:59:59.000Z

332

Double Tracks revegetation and monitoring plan  

SciTech Connect

This document is a reclamation plan for short-term and long-term stabilization of land disturbed by activities associated with interim clean-up of radionuclide-contaminated surface soil at the Double Tracks site. This document has been prepared to provide general reclamation practices and procedures that will be followed during restoration of the cleanup site. Reclamation demonstration plots were established near the site in the fall of 1994 to evaluate the performance of several native species and to evaluate different irrigation strategies. Results of the study at Double Tracks, as well as the results from numerous studies conducted at other sites (Area 11 and Area 19 of the Nevada Test Site), have been summarized and incorporated into this final reclamation plan for the interim cleanup of the Double Tracks site, located northwest of the Nevada Test Site on the Nellis Air Force Range. Surface soils at Double Tracks were contaminated as a result of the detonation of a device containing plutonium and depleted uranium using chemical explosives. The total amount of Pu deposited on the site was between 980 and 1,600 grams and was scattered downwind south of the detonation site. Short-term stabilization consists of the application of a chemical soil stabilizer that is applied immediately following excavation of the contaminated soils to minimize Pu resuspension. Long-term stabilization is accomplished by the establishment of a permanent vegetation.

NONE

1997-07-01T23:59:59.000Z

333

Neutrinoless Double Beta Decay and ??Mass Determination  

Science Journals Connector (OSTI)

The search for Neutrinoless Double Beta Decay could improve our knowledge on neutrino properties. After a brief discussion on the implications of the observation of this rare process I will introduce the experimental approaches and review the prospects of the search for this nuclear transition.

M. Pedretti

2005-01-01T23:59:59.000Z

334

Hanford Begins New Campaign to Remove Excess Water from Double...  

Energy Savers (EERE)

Hanford Begins New Campaign to Remove Excess Water from Double-Shell Tanks Hanford Begins New Campaign to Remove Excess Water from Double-Shell Tanks September 30, 2014 - 12:00pm...

335

Progress Towards Doubling the Beam Power at Fermilab's Accelerator Complex  

SciTech Connect

After a 14 month shutdown accelerator modifications and upgrades are in place to allow us doubling of the Main Injector beam power. We will discuss the past MI high power operation and the current progress towards doubling the power.

Kourbanis, ioanis

2014-06-01T23:59:59.000Z

336

Sensitivity of CUORE to Neutrinoless Double-Beta Decay  

E-Print Network (OSTI)

Sensitivity of CUORE to Neutrinoless Double-Beta Decay b c,:Results of the Search for Neutrinoless D o u b l e - B e t ah e i n a , Evidence for neutrinoless double beta decay, M o

Alessandria, F.

2013-01-01T23:59:59.000Z

337

Double photoionization of helium with synchrotron x-rays: Proceedings  

SciTech Connect

This report contains papers on the following topics: Overview and comparison of photoionization with charged particle impact; The ratio of double to single ionization of helium: the relationship of photon and bare charged particle impact ionization; Double photoionization of helium at high energies; Compton scattering of photons from electrons bound in light elements; Electron ionization and the Compton effect in double ionization of helium; Elimination of two atomic electrons by a single energy photon; Double photoionization of helium at intermediate energies; Double Photoionization: Gauge Dependence, Coulomb Explosion; Single and Double Ionization by high energy photon impact; The effect of Compton Scattering on the double to single ionization ratio in helium; and Double ionization of He by photoionization and Compton scattering. These papers have been cataloged separately for the database.

Not Available

1994-01-01T23:59:59.000Z

338

Docket No. EO-05-01: Further Notice of 230kV Circuit Planned Outages |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Further Notice of 230kV Circuit Planned Further Notice of 230kV Circuit Planned Outages Docket No. EO-05-01: Further Notice of 230kV Circuit Planned Outages Docket No. EO-05-01. Pursuant to the United States Department of Energy Order No. 202-05-03, issued December 20, 2005 directing Mirant Potomac River to generate electricity at Potomac River Generating Station, PEPCO hereby files this Further Notice of 230kV Circuit Planned Outages. Docket No. EO-05-01: Further Notice of 230kV Circuit Planned Outages More Documents & Publications Further Notice of 230kV Circuit Planned Outages Re: Potomac River Generating Station Department of Energy, Case No. EO-05-01: Potomac Electric Power Company (PEPCO) Concerning Planned Outages of the 230 kV circuits Re: Potomac River Generating Station Department of Energy Case No.

339

Further Notice of 230kV Circuit Planned Outages | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Further Notice of 230kV Circuit Planned Outages Further Notice of 230kV Circuit Planned Outages Further Notice of 230kV Circuit Planned Outages Docket No. EO-05-01. Order No. 202-05-03: Pursuant 10 the United States Department of Energy "DOE") Order No. 102-05-3, issued December 20, 2005 ("DOE Potomac River Order''), Pepco hereby files this Further Notice Of 230kV Circuit Planned Outages serving the Potomac River Substation, and through thaI station, the District of Columbia. Further Notice of 230kV Circuit Planned Outages More Documents & Publications Re: Potomac River Generating Station Department of Energy, Case No. EO-05-01: Potomac Electric Power Company (PEPCO) Concerning Planned Outages of the 230 kV circuits Docket No. EO-05-01: Further Notice of 230kV Circuit Planned Outages

340

Further Notice of 230kV Circuit Planned Outages | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Further Notice of 230kV Circuit Planned Outages Further Notice of 230kV Circuit Planned Outages Further Notice of 230kV Circuit Planned Outages Docket No. EO-05-01. Order No. 202-05-03: Pursuant 10 the United States Department of Energy "DOE") Order No. 102-05-3, issued December 20, 2005 ("DOE Potomac River Order''), Pepco hereby files this Further Notice Of 230kV Circuit Planned Outages serving the Potomac River Substation, and through thaI station, the District of Columbia. Further Notice of 230kV Circuit Planned Outages More Documents & Publications Docket No. EO-05-01: Further Notice of 230kV Circuit Planned Outages Re: Potomac River Generating Station Department of Energy, Case No. EO-05-01: Potomac Electric Power Company (PEPCO) Concerning Planned Outages of the 230 kV circuits

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Basic DC Meter Design ECE 2100 Circuit Analysis Laboratory  

E-Print Network (OSTI)

Basic DC Meter Design ECE 2100 Circuit Analysis Laboratory updated 8 January 2008 Pre-Laboratory Assignment 1. Design an ammeter with full scale current IFS equal to 5 mA using a meter movement rated at 0.5 mA and 100 mV. 2. Design a voltmeter with a full scale voltage VFS equal to 10 V using the meter

Miller, Damon A.

342

Fabrication and characterization of aluminum airbridges for superconducting microwave circuits  

SciTech Connect

Superconducting microwave circuits based on coplanar waveguides (CPW) are susceptible to parasitic slotline modes which can lead to loss and decoherence. We motivate the use of superconducting airbridges as a reliable method for preventing the propagation of these modes. We describe the fabrication of these airbridges on superconducting resonators, which we use to measure the loss due to placing airbridges over CPW lines. We find that the additional loss at single photon levels is small, and decreases at higher drive powers.

Chen, Zijun; Kelly, J.; Barends, R.; Bochmann, J.; Chen, Yu; Chiaro, B.; Dunsworth, A.; Jeffrey, E.; Mutus, J. Y.; O'Malley, P. J. J.; Neill, C.; Roushan, P.; Sank, D.; Vainsencher, A.; Wenner, J.; White, T. C. [Department of Physics, University of California, Santa Barbara, California 93106-9530 (United States); Megrant, A. [Department of Physics, University of California, Santa Barbara, California 93106-9530 (United States); Department of Materials, University of California, Santa Barbara, California 93106 (United States); Cleland, A. N.; Martinis, John M., E-mail: martinis@physics.ucsb.edu [Department of Physics, University of California, Santa Barbara, California 93106-9530 (United States); California NanoSystems Institute, University of California, Santa Barbara, California 93106-9530 (United States)

2014-02-03T23:59:59.000Z

343

ISO 9001 ISO 14001 AS 9100 CERTIFIED Mini-Circuits  

E-Print Network (OSTI)

ISO 9001 ISO 14001 AS 9100 CERTIFIED Mini-Circuits ® P.O. Box 350166, Brooklyn, New York 11235.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0 #12;ISO 9001 ISO 14001 AS 9100

Wedeward, Kevin

344

A general purpose I{sub DDQ} measurement circuit  

SciTech Connect

A relatively high-speed I{sub DDQ} measurement circuit called QuiC-Mon is described. Depending upon IC settling times, upper measurement rates range from 50 kHz to 250 kHz at 100 nA resolution. It provides an inexpensive solution for fast, sensitive I{sub DDQ} measurements in CMOS IC wafer probe or packaged part production testing.

Wallquist, K.M.; Hawkins, C.F. [Univ. of New Mexico, Albuquerque, NM (United States). Electrical & Computer Engineering Dept.; Righter, A.W. [Sandia National Labs., Albuquerque, NM (United States)

1993-11-01T23:59:59.000Z

345

Programmable Logic Circuits for Functional Integrated Smart Plastic Systems  

E-Print Network (OSTI)

, Cambridge, UK bProgrammable logic circuits for func plastic systems Antony Sou a,?, Sungjune Jung a,1, Enrico Gili a, Guillaume Fichet b, Henning Sirringhaus a,*nal integrated smart cenzo Pecunia a, Jerome Joimel b, ctronics sevier .com/locate /orgel 3112 A... - edge Centre (CIKC), and the Technology Strategy Board (TSB). We acknowledge Reckitt Benckiser for the design of the graphical pattern of the display on the FIPS2 foil. Appendix A. Supplementary material Supplementary data associated with this article...

Sou, Antony; Jung, Sungjune; Gili, Enrico; Pecuni, Vincenzo; Joimel, Jerome; Fichet, Guillaume; Sirringhaus, Henning

2014-09-12T23:59:59.000Z

346

/ Search for Neutrinoless Double Beta Decay with CUORE  

E-Print Network (OSTI)

neutrinoless double beta decay (??0?) in 130 Te and other rare processes. The observation of ??0? would

Elena Ferri

347

Geothermal: Sponsored by OSTI -- Structure of the Electric Double...  

Office of Scientific and Technical Information (OSTI)

Structure of the Electric Double Layer in Hydrothermal Systems. Molecular Simulation Approach and Interpretation of Experimental Results...

348

Ambient temperature cadmium zinc telluride radiation detector and amplifier circuit  

DOE Patents (OSTI)

A low noise, low power consumption, compact, ambient temperature signal amplifier for a Cadmium Zinc Telluride (CZT) radiation detector. The amplifier can be used within a larger system (e.g., including a multi-channel analyzer) to allow isotopic analysis of radionuclides in the field. In one embodiment, the circuit stages of the low power, low noise amplifier are constructed using integrated circuit (IC) amplifiers , rather than discrete components, and include a very low noise, high gain, high bandwidth dual part preamplification stage, an amplification stage, and an filter stage. The low noise, low power consumption, compact, ambient temperature amplifier enables the CZT detector to achieve both the efficiency required to determine the presence of radio nuclides and the resolution necessary to perform isotopic analysis to perform nuclear material identification. The present low noise, low power, compact, ambient temperature amplifier enables a CZT detector to achieve resolution of less than 3% full width at half maximum at 122 keV for a Cobalt-57 isotope source. By using IC circuits and using only a single 12 volt supply and ground, the novel amplifier provides significant power savings and is well suited for prolonged portable in-field use and does not require heavy, bulky power supply components.

McQuaid, James H. (Livermore, CA); Lavietes, Anthony D. (Hayward, CA)

1998-05-29T23:59:59.000Z

349

Ambient temperature cadmium zinc telluride radiation detector and amplifier circuit  

DOE Patents (OSTI)

A low noise, low power consumption, compact, ambient temperature signal amplifier for a Cadmium Zinc Telluride (CZT) radiation detector is disclosed. The amplifier can be used within a larger system (e.g., including a multi-channel analyzer) to allow isotopic analysis of radionuclides in the field. In one embodiment, the circuit stages of the low power, low noise amplifier are constructed using integrated circuit (IC) amplifiers , rather than discrete components, and include a very low noise, high gain, high bandwidth dual part preamplification stage, an amplification stage, and an filter stage. The low noise, low power consumption, compact, ambient temperature amplifier enables the CZT detector to achieve both the efficiency required to determine the presence of radionuclides and the resolution necessary to perform isotopic analysis to perform nuclear material identification. The present low noise, low power, compact, ambient temperature amplifier enables a CZT detector to achieve resolution of less than 3% full width at half maximum at 122 keV for a Cobalt-57 isotope source. By using IC circuits and using only a single 12 volt supply and ground, the novel amplifier provides significant power savings and is well suited for prolonged portable in-field use and does not require heavy, bulky power supply components. 9 figs.

McQuaid, J.H.; Lavietes, A.D.

1998-05-26T23:59:59.000Z

350

The Majorana Neutrinoless Double-Beta Decay Experiment  

E-Print Network (OSTI)

The Majorana Neutrinoless Double-Beta Decay Experiment Pre-conceptual Design Proposal November 22 Motivation for Neutrinoless Double-Beta Decay Experiments . . . . . . . . . 4 2.1.1 Community Guidance Neutrinoless Double-Beta Decay Results . . . . . . . . . . . . . . . . . . . . 12 2.5 Next

Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

351

Double K-Vacancy Production by X-Ray Photoionization  

E-Print Network (OSTI)

Double K-Vacancy Production by X-Ray Photoionization S. H. Southworth£ , R. W. Dunford£ , E. P Photon Source. Double K-vacancy production in Ne was observed by recording the KK-KLL Auger. For Mo, double K-vacancy production was observed by recording the K fluorescence hypersatellite

352

Sensitivity of CUORE to Neutrinoless Double-Beta Decay  

E-Print Network (OSTI)

of CUORE to Neutrinoless Double-Beta Decay b c,:L d e f F .s t results on neutrinoless double beta decay of T e w i t hthe study of neutrinoless double beta decay, J . C r y s t .

Alessandria, F.

2013-01-01T23:59:59.000Z

353

Search for Neutrinoless Double-Beta Decay  

E-Print Network (OSTI)

After the pioneering work of the Heidelberg-Moscow (HDM) and International Germanium Experiment (IGEX) groups, the second round of neutrinoless double-$\\beta$ decay searches currently underway has or will improve the life-time limits of double-$\\beta$ decay candidates by a factor of two to three, reaching in the near future the $T_{1/2} = 3 \\times 10^{25}$ yr level. This talk will focus on the large-scale experiments GERDA, EXO-200, and KamLAND-Zen, which have reported already lower half-life time limits in excess of $10^{25}$ yr. Special emphasis is given to KamLAND-Zen, which is expected to approach the inverted hierarchy regime before future 1-ton experiments probe completely this life-time or effective neutrino-mass regime, which starts at $\\approx 2 \\times 10^{26}$ yr or $\\approx 50$ meV.

Tornow, Werner

2014-01-01T23:59:59.000Z

354

Double-clad nuclear fuel safety rod  

DOE Patents (OSTI)

A device for shutting down a nuclear reactor during an undercooling or overpower event, whether or not the reactor's scram system operates properly. This is accomplished by double-clad fuel safety rods positioned at various locations throughout the reactor core, wherein melting of a secondary internal cladding of the rod allows the fuel column therein to shift from the reactor core to place the reactor in a subcritical condition.

McCarthy, William H. (Los Altos, CA); Atcheson, Donald B. (Cupertino, CA); Vaidyanathan, Swaminathan (San Jose, CA)

1984-01-01T23:59:59.000Z

355

A Microscopic Double-Slit Experiment  

NLE Websites -- All DOE Office Websites (Extended Search)

A Microscopic Double-Slit Experiment Print A Microscopic Double-Slit Experiment Print Two centuries ago, Thomas Young performed the classic demonstration of the wave nature of light. He placed a screen with two tiny slits in front of a single light source, effectively converting it into a two-centered source. On a second screen far away, he saw a pattern of light and dark diffraction fringes, a well-known hallmark of wave interference. Along with later studies using particles instead of light, the experiment played a crucial role in establishing the validity of wave-particle duality, a puzzling concept that has ultimately become central to the interpretation of complementarity in quantum mechnanics. In a new twist on this classic experiment, the double slit (with light waves) has been replaced by a diatomic molecule (with electron waves). At ALS Beamline 10.0.1, researchers have shown that diatomic molecules can serve as two-center emitters of electron waves and that traces of electron-wave interference can be directly observed in precise measurements of vibrationally resolved photoionization spectra.

356

A Microscopic Double-Slit Experiment  

NLE Websites -- All DOE Office Websites (Extended Search)

A Microscopic Double-Slit Experiment Print A Microscopic Double-Slit Experiment Print Two centuries ago, Thomas Young performed the classic demonstration of the wave nature of light. He placed a screen with two tiny slits in front of a single light source, effectively converting it into a two-centered source. On a second screen far away, he saw a pattern of light and dark diffraction fringes, a well-known hallmark of wave interference. Along with later studies using particles instead of light, the experiment played a crucial role in establishing the validity of wave-particle duality, a puzzling concept that has ultimately become central to the interpretation of complementarity in quantum mechnanics. In a new twist on this classic experiment, the double slit (with light waves) has been replaced by a diatomic molecule (with electron waves). At ALS Beamline 10.0.1, researchers have shown that diatomic molecules can serve as two-center emitters of electron waves and that traces of electron-wave interference can be directly observed in precise measurements of vibrationally resolved photoionization spectra.

357

Vibration of Generalized Double Well Oscillators  

E-Print Network (OSTI)

We have applied the Melnikov criterion to examine a global homoclinic bifurcation and transition to chaos in a case of a double well dynamical system with a nonlinear fractional damping term and external excitation. The usual double well Duffing potential having a negative square term and positive quartic term has been generalized to a double well potential with a negative square term and a positive one with an arbitrary real exponent $q > 2$. We have also used a fractional damping term with an arbitrary power $p$ applied to velocity which enables one to cover a wide range of realistic damping factors: from dry friction $p \\to 0$ to turbulent resistance phenomena $p=2$. Using perturbation methods we have found a critical forcing amplitude $\\mu_c$ above which the system may behave chaotically. Our results show that the vibrating system is less stable in transition to chaos for smaller $p$ satisfying an exponential scaling low. The critical amplitude $\\mu_c$ as an exponential function of $p$. The analytical results have been illustrated by numerical simulations using standard nonlinear tools such as Poincare maps and the maximal Lyapunov exponent. As usual for chosen system parameters we have identified a chaotic motion above the critical Melnikov amplitude $\\mu_c$.

Grzegorz Litak; Marek Borowiec; Arkadiusz Syta

2006-10-20T23:59:59.000Z

358

252 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 39, NO. 1, JANUARY 2004 A CMOS Subbandgap Reference Circuit With 1-V Power Supply Voltage  

E-Print Network (OSTI)

252 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 39, NO. 1, JANUARY 2004 A CMOS Subbandgap Reference management circuits [1]. As process technologies go into the deep-submicron eras and the demand for battery) as well as design margin. To keep pace with supply voltage requirements of a state-of-the-art CMOS process

Ayers, Joseph

359

System and method for filling a plurality of isolated vehicle fluid circuits through a common fluid fill port  

SciTech Connect

A vehicle having multiple isolated fluid circuits configured to be filled through a common fill port includes a first fluid circuit disposed within the vehicle, the first fluid circuit having a first fill port, a second fluid circuit disposed within the vehicle, and a conduit defining a fluid passageway between the first fluid circuit and second fluid circuit, the conduit including a valve. The valve is configured such that the first and second fluid circuits are fluidly coupled via the passageway when the valve is open, and are fluidly isolated when the valve is closed.

Sullivan, Scott C; Fansler, Douglas

2014-10-14T23:59:59.000Z

360

Nuclear matrix elements for neutrinoless double-beta decay and double-electron capture  

E-Print Network (OSTI)

A new generation of neutrinoless double beta decay experiments with improved sensitivity is currently under design and construction. They will probe inverted hierarchy region of the neutrino mass pattern. There is also a revived interest to the resonant neutrinoless double-electron capture, which has also a potential to probe lepton number conservation and to investigate the neutrino nature and mass scale. The primary concern are the nuclear matrix elements. Clearly, the accuracy of the determination of the effective Majorana neutrino mass from the measured 0\

Amand Faessler; Vadim Rodin; Fedor Simkovic

2012-06-03T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Printed circuit board impedance matching step for microwave (millimeter wave) devices  

DOE Patents (OSTI)

An impedance matching ground plane step, in conjunction with a quarter wave transformer section, in a printed circuit board provides a broadband microwave matching transition from board connectors or other elements that require thin substrates to thick substrate (>quarter wavelength) broadband microwave (millimeter wave) devices. A method of constructing microwave and other high frequency electrical circuits on a substrate of uniform thickness, where the circuit is formed of a plurality of interconnected elements of different impedances that individually require substrates of different thicknesses, by providing a substrate of uniform thickness that is a composite or multilayered substrate; and forming a pattern of intermediate ground planes or impedance matching steps interconnected by vias located under various parts of the circuit where components of different impedances are located so that each part of the circuit has a ground plane substrate thickness that is optimum while the entire circuit is formed on a substrate of uniform thickness.

Pao, Hsueh-Yuan; Aguirre, Jerardo; Sargis, Paul

2013-10-01T23:59:59.000Z

362

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71 - 9980 of 31,917 results. 71 - 9980 of 31,917 results. Download Letter from Commonwealth to Mirant Potomac River Concerning Serious Violations of the National Ambient Air Quality Standards for Sulfur Dioxide Docket No. EO-05-01: Letter from Commonwealth of Virginia to Mirant Potomac River concerning Serious Violations of the National Ambient Air Quality Standards for Sulfur Dioxide. http://energy.gov/oe/downloads/letter-commonwealth-mirant-potomac-river-concerning-serious-violations-national-ambient Download Notification of Planned 230kV Outage at Potomac River Generating Station Docket No. EO-05-01. The next planned outage on xxxxx high voltage circuit between xxxxx and xxxxx is tentatively scheduled for Saturday May 19, 2007 and will begin at 4:00 AM with a scheduled... http://energy.gov/oe/downloads/notification-planned-230kv-outage-potomac-river-generating-station-2

363

On the Role of Hadamard Gates in Quantum Circuits  

E-Print Network (OSTI)

We study a reduced quantum circuit computation paradigm in which the only allowable gates either permute the computational basis states or else apply a "global Hadamard operation", i.e. apply a Hadamard operation to every qubit simultaneously. In this model, we discuss complexity bounds (lower-bounding the number of global Hadamard operations) for common quantum algorithms : we illustrate upper bounds for Shor's Algorithm, and prove lower bounds for Grover's Algorithm. We also use our formalism to display a gate that is neither quantum-universal nor classically simulable, on the assumption that Integer Factoring is not in BPP.

Dan Shepherd

2005-08-22T23:59:59.000Z

364

Heat Pump Cycle with Solution Circuit and Internal Heat Exchange  

E-Print Network (OSTI)

-stage cycle, the heat transfer area required on the refrigerant side will increase by 10~ compared to the ammonia cycl e. CONCLUSIONS The hea t p1llllp cycl e employ ing one sol ut ion circuit and absorber/de sorber heat exchange has a more sophisticated... when a two-stage version fed into the same compressor. While ammonia of this cycl e is used. In this paper. another evaporate s out of an ammonia-water sol ution on C version of such cycles will be discussed which the composition. X. of this solution...

Radermacher, R.

365

A procedural language for automated analog circuit design  

E-Print Network (OSTI)

Abstractions Hierarchical Net List Summary 67 71 76 79 84 87 V LAYOUT ALGORITHMS AND RESULTS 88 5. 1 5. 2 5. 3 5. 4 5. 5 Overview F loorp1 arming Placement Routing 5. 4. 1 Global Routing 5. 4. 2 Channel Routing Summary 88 89 97 99 100... the connectivity of the system. SYS MMS/BEHAVIORAL Frequency In F\\rucnoruAL (Discrete-Time/Conrinuous-Time) Fr Fe ~&- -4 Figure 2-1 Levels of Design Abstraction for Analog Integrated Circuits Beharrr'or let/el is the highest level of design abstraction...

Macaluso, Edmond Roy

2012-06-07T23:59:59.000Z

366

New device reduces conductor burndown on distribution circuits  

SciTech Connect

Laboratory tests of an arcing clamp-type device indicate that it gives more protection against conductor burndown on covered distribution circuits. Experiments were designed to study the effects of direct lightning strokes and examine damage characteristics. This led to the conclusion that conventional overcurrent protection devices having high continuous current ratings were inadequate to prevent burndown and some kind of phase conductor protection was needed. Tests indicate that aluminum clamps installed on both sides of a stripped cover provide a lightning flashover path. (DCK)

Lee, R.E. (Pennsylvania Power and Light Co., Allentown); Fritz, D.E.; Stiller, P.H.; Kilar, L.A.; Shankle, D.F.

1980-08-01T23:59:59.000Z

367

Trap seal for open circuit liquid cooled turbines  

DOE Patents (OSTI)

An improved trap seal for open circuit liquid cooled turbines is disclosed. The trap seal of the present invention includes an annular recess formed in the supply conduit of cooling channels formed in the airfoil of the turbine buckets. A cylindrical insert is located in the annular recesses and has a plurality of axial grooves formed along the outer periphery thereof and a central recess formed in one end thereof. The axial grooves and central recess formed in the cylindrical insert cooperate with the annular recess to define a plurality of S-shaped trap seals which permit the passage of liquid coolant but prohibit passage of gaseous coolant.

Grondahl, Clayton M. (Clifton Park, NY); Germain, Malcolm R. (Ballston Lake, NY)

1980-01-01T23:59:59.000Z

368

Method for deposition of a conductor in integrated circuits  

DOE Patents (OSTI)

A method is described for fabricating integrated semiconductor circuits and, more particularly, for the selective deposition of a conductor onto a substrate employing a chemical vapor deposition process. By way of example, tungsten can be selectively deposited onto a silicon substrate. At the onset of loss of selectivity of deposition of tungsten onto the silicon substrate, the deposition process is interrupted and unwanted tungsten which has deposited on a mask layer with the silicon substrate can be removed employing a halogen etchant. Thereafter, a plurality of deposition/etch back cycles can be carried out to achieve a predetermined thickness of tungsten.

Creighton, J. Randall (Albuquerque, NM); Dominguez, Frank (Albuquerque, NM); Johnson, A. Wayne (Albuquerque, NM); Omstead, Thomas R. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

369

Dynamically Tunable Memory in Two-Component Gene Circuit  

SciTech Connect

Cell has the potential to remember the environmental conditions for many (10{sup 7}) generations but stochastic fluctuations set a fundamental limit on the stability of this memory. Here we explicitly take the binding-unbinding of macromolecules into account to propose a novel rationale for the protein-protein interaction in cell physiology. Based on the first-exit time and the corresponding deterministic characterization of various genetic circuits, we show that the reversible binding dynamics may stabilize non-genetically inherited cell states, providing a practical strategy for designing robust epigenetic memory.

Ghim, C; Almaas, E

2008-09-05T23:59:59.000Z

370

Optimal design of AC filter circuits in HVDC converter stations  

SciTech Connect

This paper investigates the reactive power as well as the harmonic conditions on both the valve and the AC-network sides of a HVDC converter station. The effect of the AC filter circuits is accurately modeled. The program is then augmented by adding an optimization routine. It can identify the optimal filter configuration, yielding the minimum current distortion factor at the AC network terminals for a prespecified fundamental reactive power to be provided by the filter. Several parameter studies were also conducted to illustrate the effect of accidental or intentional deletion of one of the filter branches.

Saied, M.M.; Khader, S.A. [Kuwait Univ. (Kuwait). Electrical and Computer Engineering Dept.

1995-12-31T23:59:59.000Z

371

Resonant circuit which provides dual-frequency excitation for rapid cycling of an electromagnet  

DOE Patents (OSTI)

Disclosed is a novel ring-magnet control circuit that permits synchrotron repetition rates much higher than the frequency of the sinusoidal guide field of the ring magnet during particle acceleration. The control circuit generates sinusoidal excitation currents of different frequencies in the half waves. During radio-frequency acceleration of the synchrotron, the control circuit operates with a lower frequency sine wave and, thereafter, the electromagnets are reset with a higher-frequency half sine wave.

Praeg, W.F.

1982-03-09T23:59:59.000Z

372

Neutrinoless Double Beta Decay with Composite Neutrinos.  

E-Print Network (OSTI)

We study in detail the contribution of heavy composite Majorana neutrinos to neutrino-less double beta decay (0???). Our analysis confirms the result of a previous estimate by two of the authors. Excited neutrinos couple to the electroweak gauge bosons through a magnetic type effective Lagrangian. The relevant nuclear matrix element is related to matrix elements available in the literature and current bounds on the half-life of 0??? are converted into bounds on the compositeness scale and/or the heavy neutrino mass. Our bounds are of the same order of magnitude as those available from accelerator experiments.

O. Panella (a; C. Carimalo (b; Y. N. Srivastava (a; A. Widom (c

1997-01-01T23:59:59.000Z

373

Double acting stirling engine phase control  

DOE Patents (OSTI)

A mechanical device for effecting a phase change between the expansion and compression volumes of a double-acting Stirling engine uses helical elements which produce opposite rotation of a pair of crankpins when a control rod is moved, so the phase between two pairs of pistons is changed by +.psi. and the phase between the other two pairs of pistons is changed by -.psi.. The phase can change beyond .psi.=90.degree. at which regenerative braking and then reversal of engine rotation occurs.

Berchowitz, David M. (Scotia, NY)

1983-01-01T23:59:59.000Z

374

Neutrino Oscillations, Neutrinoless Double Beta Decay  

Science Journals Connector (OSTI)

We review the experimental evidence for neutrino mixing and neutrino mass. Searches for possible branches into heavy neutrinos do not reveal evidence for static mixing with branching ratios larger than 10?4 to 10?6. Similarly neutrino oscillation experiments show no evidence for dynamic mixing in various oscillation channels. Stringent limits for ? e disappearance from a recent reactor experiment are presented. Results from neutrinoless double beta decay provide sensitive test for Majorana mass and right?hand couplings the present limits being 310 eV and 10?5 respectively.

F. Boehm

1982-01-01T23:59:59.000Z

375

Neutrinoless double beta decay and neutrino masses  

Science Journals Connector (OSTI)

Neutrinoless double beta decay (0???) is a promising test for lepton number violating physics beyond the standard model (SM) of particle physics. There is a deep connection between this decay and the phenomenon of neutrino masses. In particular we will discuss the relation between 0??? and Majorana neutrino masses provided by the so-called Schechter-Valle theorem in a quantitative way. Furthermore we will present an experimental cross check to discriminate 0??? from unknown nuclear background using only one isotope i.e. within one experiment.

Michael Duerr

2012-01-01T23:59:59.000Z

376

Neutrinoless double ? decay with composite neutrinos  

Science Journals Connector (OSTI)

We study in detail the contribution of heavy composite Majorana neutrinos to neutrinoless double beta decay (0???). Our analysis confirms the result of a previous estimate by two of the authors. Excited neutrinos couple to the electroweak gauge bosons through a magnetic-type effective Lagrangian. The relevant nuclear matrix element is related to matrix elements available in the literature and current bounds on the half-life of 0??? are converted into bounds on the compositeness scale and/or the heavy neutrino mass. Our bounds are of the same order of magnitude as those available from accelerator experiments.

O. Panella; C. Carimalo; Y. N. Srivastava; A. Widom

1997-11-01T23:59:59.000Z

377

E-Print Network 3.0 - active neural circuits Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

to Summary: with high dimensions and dense structure is to employ artificial neural networks based on circuit... a neural network for solving linear programming problems...

378

Electrostatic Discharge Protection and Circuits for Ultrasonic Imager-on-Chip  

E-Print Network (OSTI)

An improved bidirectional SCR structure for low-triggeringand high holding-voltage SCR for on-chip ESD protectionand equivalent circuit of SCR in CMOS technology.

LIU, JIAN

2012-01-01T23:59:59.000Z

379

E-Print Network 3.0 - afferent somatosensory circuits Sample...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Vestibular Summary: of each vestibular afferent was analyzed off-line. A windowing circuit (BAK Electronics Inc., Germantown... Semicircular Canal Afferents Similarly Encode...

380

Modeling CHP Descriptions in Labeled Transitions Systems for an Efficient Formal Validation of Asynchronous Circuit Specifications  

Science Journals Connector (OSTI)

This work addresses the analysis and validation of CHP specifications for asynchronous circuits, using property Verification tools. CHP semantics, initially given in terms of Petri...

Menouer Boubekeur; Dominique Borrione

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

E-Print Network 3.0 - analog circuits macromodel Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Latches using Trajectory Summary: at nanoscale technologies. I. INTRODUCTION Advanced CAD techniques for analog, mixed-signal and RF circuits... . These methods can extract...

382

Switched reluctance motor drive circuit evaluation criteria for vehicle efficiency responsiveness.  

E-Print Network (OSTI)

??This thesis intends to examine the principles of operation for switched reluctance machines (SRM) and examine the power electronic drive circuits that control them, in (more)

Cunningham, John David

2011-01-01T23:59:59.000Z

383

Microsoft Word - 911146_0_SSC-15 Primary Circuit and BOP Inst...  

NLE Websites -- All DOE Office Websites (Extended Search)

SERVICES FOR THE NEXT GENERATION NUCLEAR PLANT (NGNP) WITH HYDROGEN PRODUCTION Test Plan for Primary Circuit and Balance of Plant Instrumentation Prepared by General...

384

Apparatus And Method Of Using Flexible Printed Circuit Board In Optical Transceiver Device  

DOE Patents (OSTI)

This invention relates to a flexible printed circuit board that is used in connection with an optical transmitter, receiver or transceiver module. In one embodiment, the flexible printed circuit board has flexible metal layers in between flexible insulating layers, and the circuit board comprises: (1) a main body region orientated in a first direction having at least one electrical or optoelectronic device; (2) a plurality of electrical contact pads integrated into the main body region, where the electrical contact pads function to connect the flexible printed circuit board to an external environment; (3) a buckle region extending from one end of the main body region; and (4) a head region extending from one end of the buckle region, and where the head region is orientated so that it is at an angle relative to the direction of the main body region. The electrical contact pads may be ball grid arrays, solder balls or land-grid arrays, and they function to connect the circuit board to an external environment. A driver or amplifier chip may be adapted to the head region of the flexible printed circuit board. In another embodiment, a heat spreader passes along a surface of the head region of the flexible printed circuit board, and a window is formed in the head region of the flexible printed circuit board. Optoelectronic devices are adapted to the head spreader in such a manner that they are accessible through the window in the flexible printed circuit board.

Anderson, Gene R. (Albuquerque, NM); Armendariz, Marcelino G. (Albuquerque, NM); Bryan, Robert P. (Albuquerque, NM); Carson, Richard F. (Albuquerque, NM); Duckett, III, Edwin B. (Albuquerque, NM); McCormick, Frederick B. (Albuquerque, NM); Peterson, David W. (Sandia Park, NM); Peterson, Gary D. (Albuquerque, NM); Reysen, Bill H. (Lafayette, CO)

2005-03-15T23:59:59.000Z

385

Systems/Circuits Cortical Pitch Regions in Humans Respond Primarily to  

E-Print Network (OSTI)

Systems/Circuits Cortical Pitch Regions in Humans Respond Primarily to Resolved Harmonics and Cognitive Sciences, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 Pitch of pitch perception havedifferentiatedbetweentemporalandspectralcues

Kanwisher, Nancy

386

18. Consider the special case of the RLC circuit in which the ...  

E-Print Network (OSTI)

18. Consider the special case of the RLC circuit in which the resistance is negligible and the driving EMF is zero. The differential equation governing the charge.

387

E-Print Network 3.0 - advanced microwave circuits Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

stacked junctions, voltage standard. I. INTRODUCTION THE major... - termination resistor has the largest current range, indicating that this circuit produces the best...

388

Development and interrupting tests on 250KV 8KA HVDC circuit breaker  

SciTech Connect

This paper describes the circuit and component selections, development and equivalent circuit test results on an HVDC circuit breaker for an HVDC transmission line. A puffer type SF/sub 6/ gas interrupter for AC circuit breakers is utilized for interrupting DC current with injection of high-frequency inverse current from a commutating capacitor precharged to HVDC line voltage. Also, the effectiveness of application of the HVDC breaker to an HVDC system with two parallel transmission lines is demonstrated through the EMTP simulation.

Tokuyama, S.; Arimatsu, K.; Hirata, K.; Kato, Y.; Yoshioka, Y.

1985-09-01T23:59:59.000Z

389

Ion chromatography in the manufacture of multilayer circuit boards  

SciTech Connect

Ion chromatography (IC) has proven useful in analyzing chemical solutions used in the manufacture of multilayer circuit boards. Unlike other chemical quantification techniques, IC provides results on ions not expected in the production solutions. Thus, solution contamination and break-down products can be monitored in every phase of the circuit board manufacturing. During the first phase, epoxy laminates experience an etchback, first in chromic acid, which can be analyzed for trace chloride and sulfate, then in ammonium bifluoride/HCl, which can be analyzed for fluoride and chloride. Following a wet-blasting to roughen up the surface, 20 microinches of copper are deposited using an electroless bath. Again, IC is applicable for monitoring formate, tartarate, and sulfate levels. Next, an acid copper bath is used to electroplate the through holes with 0.001 inches of ductile copper. This bath is analyzed for trace chloride. Photoimaging is then performed, and the organic solvents used can be assayed for trace ionic chloride. Finally, a fluoroboric acid-based tin-lead bath is used to deposit a solderable alloy. This bath is analyzed for fluoroborate, tin, and lead. In addition, mobile phase ion chromatography (MPIC) is used to monitor the nonionic organic brighteners in the baths. 11 refs., 7 figs.

Smith, R.E.

1990-01-01T23:59:59.000Z

390

Ion chromatography in the manufacture of multilayer circuit boards  

SciTech Connect

Ion chromatography (IC) has proven useful in analyzing chemical solutions used in the manufacture of multilayer circuit boards. IC provides results on ions not expected in the production solutions. Thus solution contamination, and breakdown products can be monitored in every phase of the circuit board manufacturing. During the first phase, epoxy laminates experience an etchback, first in chromic acid, which can be analyzed for trace chloride and sulfate, then in ammonium bifluoride/HCl, which can be analyzed for fluoride and chloride. Following a wet blasting to roughen up the surface, 20 ..mu..in. of copper are deposited using an electroless bath. Again, IC is applicable for monitoring formate, tartarate, and sulfate levels. Next, an acid copper bath is used to electroplate the through holes with 0.001 in. of ductile copper. This bath is analyzed for trace chloride. Photoimaging is then performed, and the organic solvents used can be assayed for trace ionic chloride. Finally, a fluoroboric acid-based tin-lead bath is used to deposit a solderable alloy. This bath is analyzed for total fluoroborate, tin, and lead. In addition, mobile phase ion chromatography (MPIC) is used to monitor the nonionic organic brighteners in the baths. 11 refs., 3 figs.

Smith, R.E.

1987-10-01T23:59:59.000Z

391

Reliability centered maintenance of power transformers and circuit breakers  

SciTech Connect

At the Bonneville Power Administration (BPA), we have historically maintained high voltage equipment. Including transformers and power circuit breakers, on a time driven basis. While this has served our needs in the past, newer methods are needed to effectively maintain the power system in future years. Today aging equipment, maintenance backlogs, and budget constraints are a reality. BPA has initiated a research and development project to examine reliability centered maintenance (RCM) as an alternative to time based maintenance on high voltage equipment. Under RCM, the performance of each place of equipment is to be monitored by observing many operating parameters. For example, with circuit breakers we will observe (measure) the trip time, accumulated contact wear using I{sup 2}T, timing of the mechanism, plus several other parameters. Equipment performing below a predetermined level, or equipment having accumulated a large amount of ``usage`` will receive maintenance. The maintenance will restore full performance and preserve an acceptable service life for that piece of equipment. To develop and evaluate RCM concepts, BPA is installing a prototype system at our Alvey Substation on 4 transformers and 25 breakers.

Purucker, S.L.; Goeltz, R.T. [Oak Ridge National Lab., TN (United States); Hemmelman, K.; Price, R. [Bonneville Power Administration, Van Couver, WA (United States)

1992-08-01T23:59:59.000Z

392

Fault current limiter and alternating current circuit breaker  

DOE Patents (OSTI)

A solid-state circuit breaker and current limiter are disclosed for a load served by an alternating current source having a source impedance, the solid-state circuit breaker and current limiter comprising a thyristor bridge interposed between the alternating current source and the load, the thyristor bridge having four thyristor legs and four nodes, with a first node connected to the alternating current source, and a second node connected to the load. A coil is connected from a third node to a fourth node, the coil having an impedance of a value calculated to limit the current flowing therethrough to a predetermined value. Control means are connected to the thyristor legs for limiting the alternating current flow to the load under fault conditions to a predetermined level, and for gating the thyristor bridge under fault conditions to quickly reduce alternating current flowing therethrough to zero and thereafter to maintain the thyristor bridge in an electrically open condition preventing the alternating current from flowing therethrough for a predetermined period of time. 9 figs.

Boenig, H.J.

1998-03-10T23:59:59.000Z

393

Fault current limiter and alternating current circuit breaker  

SciTech Connect

A solid-state circuit breaker and current limiter for a load served by an alternating current source having a source impedance, the solid-state circuit breaker and current limiter comprising a thyristor bridge interposed between the alternating current source and the load, the thyristor bridge having four thyristor legs and four nodes, with a first node connected to the alternating current source, and a second node connected to the load. A coil is connected from a third node to a fourth node, the coil having an impedance of a value calculated to limit the current flowing therethrough to a predetermined value. Control means are connected to the thyristor legs for limiting the alternating current flow to the load under fault conditions to a predetermined level, and for gating the thyristor bridge under fault conditions to quickly reduce alternating current flowing therethrough to zero and thereafter to maintain the thyristor bridge in an electrically open condition preventing the alternating current from flowing therethrough for a predetermined period of time.

Boenig, Heinrich J. (Los Alamos, NM)

1998-01-01T23:59:59.000Z

394

Double pion photoproduction off 40Ca  

E-Print Network (OSTI)

The photoproduction of pi0pi0 and pi0pi+/- pairs off 40Ca has been investigated with the TAPS detector using the Glasgow photon tagging spectrometer at the Mainz MAMI accelerator. Data have been taken for incident photon energies in the energy range from 200 - 820 MeV. Total cross sections have been extracted from threshold up to the maximum photon energy and invariant mass distributions of the pion pairs have been obtained for incident photon energies between 400 - 500 MeV and 500 - 550 MeV. The double pi0 invariant mass distributions show some relative enhancement with respect to the mixed charge channel at small invariant masses. The effects are smaller than previously observed for lead nuclei and the distributions do not significantly deviate from carbon data. The data are in good agreement with the results of recent calculations in the framework of the BUU model, with careful treatment of final state interaction effects but without an explicit in-medium modification of scalar, iso-scalar pion pairs. This means that for Ca most of the experimentally observed effect can be explained by final state interactions. Only at low incident photon energies there is still a small low mass enhancement of the double pi0 data over the BUU results.

F. Bloch; J. Ahrens; J. R. M. Annand; R. Beck; L. S. Fog; D. Hornidge; S. Janssen; M. Kotulla; B. Krusche; J. C. McGeorge; I. J. D. MacGregor; J. G. Messchendorp; V. Metag; R. Novotny; R. O. Owens; M. Pfeiffer; M. Rost; R. Sanderson; S. Schadmand; A. Thomas; D. P. Watts

2007-03-24T23:59:59.000Z

395

Search For Neutrinoless Double Beta Decay  

E-Print Network (OSTI)

The HEIDELBERG-MOSCOW experiment, which is the most sensitive double beta decay experiment since ten years has been regularly continued until end of November 2003. An analysis of the data has been performed already until May 20, 2003. The experiment yields now, on a 4? level, evidence for lepton number violation and proves that the neutrino is a Majorana particle. It further shows that neutrino masses are degenerate. In addition it puts several stringent constraints on other physics beyond the Standard Model. Among others it opens the door to test various supersymmetric theory scenarios, for example it gives the sharpest in the R-parity violating part of the superpotential, and limit on the parameter ? ? 111 gives information on the splitting of the sneutrino-antisneutrino system. The result from the HEIDELBERG-MOSCOW experiment is consistent with recent results from CMB investigations, with high energy cosmic rays, with the result from the g-2 experiment and with recent theoretical work. It is indirectly supported by the analysis of other Ge double beta experiments. Recent criticism of various kind has been shown to be wrong, among others by measurements performed in 2003 with a 214Bi source ( 226Ra), by simulation of the background in the range of Q?? by GEANT4, and by deeper investigation of statistical features such as sensitivity of peak search, and relevance of width of window of analysis. 1

H. V. Klapdor-kleingrothaus *a; I. V. Krivosheina A; A. Dietz A

2004-01-01T23:59:59.000Z

396

Particle acceleration in double radio sources  

Science Journals Connector (OSTI)

Further study has been made of a model of extragalactic double radio sources in which the magnetized accretion disc of a massive black hole acts as an electric dynamo producing oppositely directed beams of relativistic particles. An empty region of small angular sizea vortice coreis shown to be a possible consequence of the hydrodynamics of accretion of gas with angular momentum. An ambient magnetic field in the gas tends to accumulate in the core region. The acceleration of electrons in the dynamo electric field gives rise to oppositely directed electron beams which in turn produce synchroton gamma rays collimated along the core. Collisions between the gamma rays and low energy photons caN initiate an electromagnetic cascade shower. The cascade acts to produce a collimated relativistic electron?positron beam. If the current flow in the dynamo occurs in surges then the outward propagation of the head of the electronpositron beams may produce expanding compact radio components. The electronpositron beam is ballistic in nature and it is electrically neutral and carries no current. Such a beam appears to have favorable stability properties. The beam is eventually stopped and spread out in pitch angle by the ram pressure of the external medium. Synchrotron radiated lobes of double radio sources.

R. V. E. Lovelace; J. MacAuslan; M. Burns

1979-01-01T23:59:59.000Z

397

Double Retort System for Materials Compatibility Testing  

SciTech Connect

With Naval Reactors (NR) approval of the Naval Reactors Prime Contractor Team (NRPCT) recommendation to develop a gas cooled reactor directly coupled to a Brayton power conversion system as the Space Nuclear Power Plant (SNPP) for Project Prometheus (References a and b) there was a need to investigate compatibility between the various materials to be used throughout the SNPP. Of particular interest was the transport of interstitial impurities from the nickel-base superalloys, which were leading candidates for most of the piping and turbine components to the refractory metal alloys planned for use in the reactor core. This kind of contamination has the potential to affect the lifetime of the core materials. This letter provides technical information regarding the assembly and operation of a double retort materials compatibility testing system and initial experimental results. The use of a double retort system to test materials compatibility through the transfer of impurities from a source to a sink material is described here. The system has independent temperature control for both materials and is far less complex than closed loops. The system is described in detail and the results of three experiments are presented.

V. Munne; EV Carelli

2006-02-23T23:59:59.000Z

398

Neutrinoless double beta decay search with the NEMO 3 experiment  

Science Journals Connector (OSTI)

The NEMO 3 experiment searches for neutrinoless double beta decay and makes precision measurements of two?neutrino double beta decay in seven isotopes. The latest two?neutrino half?life results are presented together with the limits on neutrinoless half?lives and the corresponding effective Majorana neutrino masses. Also given are the limits obtained on neutrinoless double beta decay mediated by R p ?violating SUSY right?hand currents and different Majoron emission modes.

Irina Nasteva; NEMO collaboration

2008-01-01T23:59:59.000Z

399

Thermal Performance of a Double-Tube Type Lng Vaporizer  

Science Journals Connector (OSTI)

This report concerns the confirmed test results and method of analysis of the thermal performance of a double-tube type LNG vaporizer (DTV). The DTV is a...

Y. Miyata; T. Miura; S. Kasahara; H. Shohtani

1994-01-01T23:59:59.000Z

400

Majorana Neutrino Masses from Neutrinoless Double Beta Decay and Cosmology  

E-Print Network (OSTI)

When three Majorana neutrinos describe the solar and atmospheric neutrino data via oscillations, a nonzero measurement of neutrinoless double beta ($0\

V. Barger; K. Whisnant

1999-04-08T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Electromagnetically Induced Transparency in a Double Well Atomic Josephson Junction  

E-Print Network (OSTI)

observation of these Josephson junction resonances. 2.dressed Bose condensed Josephson junction Let us consider ain a Double Well Atomic Josephson Junction J.O. Weatherall

Weatherall, J. O.; Search, C. P.

2009-01-01T23:59:59.000Z

402

Neutrinoless double beta decay can constrain neutrino dark matter  

E-Print Network (OSTI)

We examine how constraints can be placed on the neutrino component of dark matter by an accurate measurement of neutrinoless double beta ($0\

V. Barger; S. L. Glashow; D. Marfatia; K. Whisnant

2002-02-26T23:59:59.000Z

403

The complex Doppler effect in double negative media  

Science Journals Connector (OSTI)

The Doppler effect in doubly double negative acoustic media is ... s functions. It is shown that several Doppler modes can be generated by a monochromatic...

I. V. Lisenkov; S. A. Nikitov

2011-06-01T23:59:59.000Z

404

A Search for Neutrinoless Double Beta Decay of Te-130.  

E-Print Network (OSTI)

??This dissertation describes an experimental search for neutrinoless double beta (0???) decay of 130Te. An observation of 0??? decay would establish that neutrinos are Majorana (more)

Bryant, Adam Douglas

2010-01-01T23:59:59.000Z

405

2005 Double white lines on bills of Razorbill 103 DOUBLE WHITE LINES ON THE BILL OF THE  

E-Print Network (OSTI)

2005 Double white lines on bills of Razorbill 103 DOUBLE WHITE LINES ON THE BILL OF THE RAZORBILL.L., MUZAFFAR S.B. & JONES I.L. Lavers J.L., Muzaffar S.B. & Jones I.L. 2006. Double white lines on the bill Seabirds 7(3): 103-108. One of the diagnostic features of the Razorbill Alca torda is the distinct white

Jones, Ian L.

406

A Smart Algorithm for the Diagnosis of Short-Circuit Faults in a Photovoltaic Generator  

E-Print Network (OSTI)

A Smart Algorithm for the Diagnosis of Short-Circuit Faults in a Photovoltaic Generator Wail Rezgui observations distributed over classes is used for simulation purposes. Keywords--Photovoltaic generator, SVM, k-NN, short-circuit fault, smart classification, linear programming. NOMENCLATURE PV = Photovoltaic; SVM

Paris-Sud XI, Université de

407

A Worst-Case Circuit Delay Verification Technique Considering Power Grid Voltage Variations  

E-Print Network (OSTI)

A Worst-Case Circuit Delay Verification Technique Considering Power Grid Voltage Variations then these critical paths we tie the supplies of the gates to physical power grids and re-analyze for the worst- case and report on the implementation results using benchmark circuits tied to a number of test-case power grids

Najm, Farid N.

408

A computational analysis of the carbon-nanotube-based resonant-circuit sensors  

E-Print Network (OSTI)

A computational analysis of the carbon-nanotube-based resonant-circuit sensors M. Grujicica,* , G reduction in the resonant frequency of the resonant circuit-based chemical gas sensors. It is found of applications ranging from house gas and fire alarms to medical diagnostic applications and the control

Grujicic, Mica

409

A CycloDissipativity Condition for Power Factor Improvement in Electrical Circuits  

E-Print Network (OSTI)

A Cyclo­Dissipativity Condition for Power Factor Improvement in Electrical Circuits Romeo Ortega compensation problem for electrical circuits. Namely, we prove that a necessary condition for a (shunt of the source are functions of time and are denoted by the column vectors vs, is Rq . The load is described

Stankoviæ, Aleksandar

410

A Scalable Soft Spot Analysis Methodology for Compound Noise Effects in Nano-meter Circuits  

E-Print Network (OSTI)

A Scalable Soft Spot Analysis Methodology for Compound Noise Effects in Nano-meter Circuits Chong@ece.ucsd.edu ABSTRACT Circuits using nano-meter technologies are becoming increasingly vulnerable to signal interference methodology to study the vulnerability of digital ICs exposed to nano-meter noise and transient soft errors

California at San Diego, University of

411

Validation of simulated integrated circuit reliability in conjunction with field data  

Science Journals Connector (OSTI)

A thorough reliability analysis of integrated circuit field failure data, recorded from 2002 to 2009, is utilized in order to generate real failure rates for various device process technologies and feature sizes (or "technology nodes"). The results of ... Keywords: failure rate, integrated circuit, physics-of-failure, reliability

Avshalom Hava; Jin Qin; Joseph B. Bernstein

2011-06-01T23:59:59.000Z

412

AMOLED pixel driver circuits based on poly-Si TFTs: A comparison  

Science Journals Connector (OSTI)

In this paper, four different driver circuits for an active matrix organic light-emitting diode (AMOLED) pixel based on thin film transistor (TFT) technology are analyzed and compared. In particular, the comparison analyzed accuracy, driving speed, power ... Keywords: AMOLED, Digital circuit, Driver, Mixed design, TFT

Gaetano Palumbo; Melita Pennisi

2008-05-01T23:59:59.000Z

413

A nested branch and price approach to designing the circuit card assembly factory  

E-Print Network (OSTI)

Industrial competition has placed a premium on prescribing the optimal design of a circuit card assembly factory. This problem is to prescribe the number of lines of each type, the line type to which each circuit card type is to be assigned...

Warrier, Deepak

2012-06-07T23:59:59.000Z

414

August 31, 2000 1 EE371: Advanced VLSI Circuit Design David Harris  

E-Print Network (OSTI)

August 31, 2000 1 EE371: Advanced VLSI Circuit Design David Harris Interconnect Delay Modeling Harris Observing that a distributed RC line has the same delay as a lumped RC element with half CWRW ---------------- #12;August 31, 2000 3 EE371: Advanced VLSI Circuit Design David Harris The total

Harris, David Money

415

2=picosecond, GaAs photodiode optoelectronic circuit for optical correlation applications  

E-Print Network (OSTI)

2=picosecond, GaAs photodiode optoelectronic circuit for optical correlation applications K. D. Li GaAs Schottky photodiode is monolithically integrated with a microwave detector. By using this new optoelectronic circuit.in place of a nonlinear crystal in an optical correlation setup, the high-speed photodiode

Ozbay, Ekmel

416

Acceptance test procedure for removal of CS1K circuit switcher block and trip schemes  

SciTech Connect

This supporting document provides a detailed process to test the functions of the circuit switcher, protective relays, alarms, SCADA and 125VDC control logic of 115kV and 13.8kV systems at B3S4 substation following the removal of trip and blocking schemes to Transformer No.1 Circuit Switcher B594.

HACHE, J.M.

1999-08-25T23:59:59.000Z

417

Umass Lowell, ECE Spring 2014, Tingshu Hu 16.201 Introductory Circuit Theory I  

E-Print Network (OSTI)

-ampere characteristics, energy relations, First-order transients: initial conditions, natural response, and natural frequencies. Network response to unit step function and unit impulse. Second-order transients: RLC circuits circuit elements through terminal descriptions, volt-ampere relationships and energy consumption/storage

Hu, Tingshu

418

ELECTRICAL SAFETY HAZARDS HANDBOOK Littelfuse is the global leader in circuit protection  

E-Print Network (OSTI)

ELECTRICAL SAFETY HAZARDS HANDBOOK #12;Littelfuse is the global leader in circuit protection's Leading Provider of Circuit Protection Solutions #12;LITTELFuSE ELECTRICAL SAFETY HAZARDS HANDBOOK This Electrical Safety Hazards Handbook was developed for general education purposes only and is not intended

419

An Effective Power Mode Transition Technique in MTCMOS Circuits Afshin Abdollahi  

E-Print Network (OSTI)

of Southern California afshin@usc.edu Farzan Fallah Fujitsu Labs. of America farzan@us.fujitsu.com Massoud transitions in a circuit. This can result in wrong values being latched in the circuit registers. We propose by utilizing high speed, low Vt transistors for logic cells and low leakage, high Vt devices as sleep

Pedram, Massoud

420

RP-SYN: synthesis of random pattern testable circuits with test point insertion  

Science Journals Connector (OSTI)

An automated logic synthesis procedure, called RP-SYN, is described for synthesizing random pattern testable circuits. RP-SYN takes as an input a two-level description of a circuit and a constraint on the minimum fault detection probability (threshold ...

N. A. Touba; E. J. McCluskey

2006-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

An Inexpensive Ohmic Transformer Firing Circuit for the CDXU Spherical Torus  

E-Print Network (OSTI)

1 An Inexpensive Ohmic Transformer Firing Circuit for the CDX­U Spherical Torus T. Munsat, R designed and modeled a simple, efficient circuit for delivering power to the CDX­U ohmic transformer, spherical tori) have traditionally driven plasma current by using the transformer action of a centrally

422

An Inexpensive Ohmic Transformer Firing Circuit for the CDX-U Spherical Torus  

E-Print Network (OSTI)

1 An Inexpensive Ohmic Transformer Firing Circuit for the CDX-U Spherical Torus T. Munsat, R designed and modeled a simple, efficient circuit for delivering power to the CDX-U ohmic transformer, spherical tori) have traditionally driven plasma current by using the transformer action of a centrally

423

AN INFINITE DIMENSIONAL DESCRIPTOR SYSTEM MODEL FOR ELECTRICAL CIRCUITS WITH TRANSMISSION LINES  

E-Print Network (OSTI)

AN INFINITE DIMENSIONAL DESCRIPTOR SYSTEM MODEL FOR ELECTRICAL CIRCUITS WITH TRANSMISSION LINES TIMO REIS Abstract. In this paper a model of linear electrical circuits with transmission lines is de-coupled with the telegraph equations who describe the behavior of the transmission lines. The resulting system of equations

Reis, Timo

424

Nano-CMOS Mixed-Signal Circuit Metamodeling Techniques: A Comparative Study  

E-Print Network (OSTI)

Nano-CMOS Mixed-Signal Circuit Metamodeling Techniques: A Comparative Study Oleg Garitselov1 , Saraju P. Mohanty2 , Elias Kougianos3 , and Priyadarsan Patra4 NanoSystem Design Laboratory (NSDL, http Abstract--Fast design space exploration of complex nano- CMOS mixed-signal circuits is an important problem

Mohanty, Saraju P.

425

A Memory Aware Behavioral Synthesis Tool for Real-Time VLSI Circuits  

E-Print Network (OSTI)

A Memory Aware Behavioral Synthesis Tool for Real-Time VLSI Circuits Gwenol´e Corre, Eric Senn the mem- ory architecture and the memory mapping in the Behav- ioral Synthesis of Real-Time VLSI circuits. We formalize the memory mapping as a set of constraints for the syn- thesis, and defined a Memory

Paris-Sud XI, Université de

426

A hybrid double-dot in silicon  

SciTech Connect

We report electrical measurements of a single arsenic dopant atom in the tunnel barrier of a silicon single-electron transistor (SET). In addition to performing the electrical characterisation of the individual dopants, we study the series electrical transport through the dopant and SET. We measure the bias triangles of this hybrid double-dot and show that we can tune the electrostatic coupling between the two sub-systems. Additionally, we measured SET in which an additional plunger gate allows the reduction of the electron number in the SET down to the few-electron regime where the dot presents well-defined spin configurations. Finally, we discuss the challenges of operating a dopant-dot hybrid system in the few-electron regime.

Gonzalez-Zalba, M. F.; Heiss, D.; Ferguson, A. J. [Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge (United Kingdom)

2013-12-04T23:59:59.000Z

427

Efficient jitter compensation using double exponential smoothing  

Science Journals Connector (OSTI)

This paper proposes a new jitter reduction scheme based on double exponential smoothing (DES). We compare this DES-based method to jitter reduction methods based on the Kalman filter (KF) and extended Kalman filter (EKF), two well-known methods of jitter reduction. To evaluate the jitter reduction performance, we used a laser pointer interaction system with a known problem with jittery laser spot movements caused by natural hand tremors. We show that the DES-based scheme runs approximately 100 times faster than the EKF-based method and 19 times faster than the KF-based method. Furthermore, in terms of jitter reduction, the proposed DES-based method yields approximately 18% better results than the EKF-based method and 20% better results than the KF-based method.

Min Gyo Chung; Sang-Kyun Kim

2013-01-01T23:59:59.000Z

428

Range Separated Brueckner Coupled Cluster Doubles Theory  

E-Print Network (OSTI)

We introduce a range-separation approximation to coupled cluster doubles (CCD) theory that successfully overcomes limitations of regular CCD when applied to the uniform electron gas. We combine the short-range ladder channel with the long-range ring channel in the presence of a Bruckner renormalized one-body interaction and obtain ground-state energies with an accuracy of 0.001 a.u./electron across a wide range of density regimes. Our scheme is particularly useful in the low-density and strongly-correlated regimes, where regular CCD has serious drawbacks. Moreover, we cure the infamous overcorrelation of approaches based on ring diagrams (i.e. the particle-hole random phase approximation). Our energies are further shown to have appropriate basis set and thermodynamic limit convergence, and overall this scheme promises energetic properties for realistic periodic and extended systems which existing methods do not possess.

Shepherd, James J; Scuseria, Gustavo E

2013-01-01T23:59:59.000Z

429

Experimental searches of neutrinoless double beta decay  

E-Print Network (OSTI)

Neutrinoless double decay is a unique probe for lepton number conservation and neutrino properties. It allows to investigate the Dirac/Majorana nature of the neutrinos and their absolute mass scale (hierarchy problem) with unprecedented sensitivity. A number of experiments are presently under preparation to cover the quasi-degenerate region of the neutrino mass spectrum. Improved sensitivities are however required to sound the so-called inverted hierarchy region. This is a real challenge faced by a number of new proposed projects, based either on large expansions of the present experiments or on new ideas top improve the technical performance or reduce the background contributions. A review of the most relevant ongoing experiments is given. The most relevant parameters contributing to the experimental sensitivity are discussed and a critical comparison of the future projects is proposed.

Oliviero Cremonesi

2012-12-19T23:59:59.000Z

430

Double Shell Tank (DST) Utilities Specification  

SciTech Connect

This specification establishes the performance requirements and provides the references to the requisite codes and standards to he applied during the design of the Double-Shell Tank (DST) Utilities Subsystems that support the first phase of waste feed delivery (WFD). The DST Utilities Subsystems provide electrical power, raw/potable water, and service/instrument air to the equipment and structures used to transfer low-activity waste (LAW) and high-level waste (HLW) to designated DST staging tanks. The DST Utilities Subsystems also support the equipment and structures used to deliver blended LAW and HLW feed from these staging tanks to the River Protection Project (RPP) Privatization Contractor facility where the waste will be immobilized. This specification is intended to be the basis for new projects/installations. This specification is not intended to retroactively affect previously established project design criteria without specific direction by the program.

SUSIENE, W.T.

2000-04-27T23:59:59.000Z

431

Correlations and the neutrinoless double beta decay  

Science Journals Connector (OSTI)

We explore the influence of the deformation on the nuclear matrix elements of the neutrinoless double beta decay (NME) concluding that the difference in deformation ?or more generally on the amount of quadrupole correlations? between parent and grand daughter nuclei quenchs strongly the decay. We discuss how varies the nuclear matrix element of 76 Ge decay when the wave functions of the two nuclei involved in the transition are constrained to reproduce the experimental occupancies. In the Interacting Shell Model description the value of the NME is enhanced about 15% compared to previous calculations whereas in the QRPA the NMEs are reduced by 20%30% thus the discrepancies between both approaches diminish.

J. Menndez; A. Poves; E. Caurier; F. Nowacki

2009-01-01T23:59:59.000Z

432

Using Simple Circuits as Thermal Models for Your Home  

Science Journals Connector (OSTI)

In 2009 President Obama proposed an initiative to decrease our country's energy consumption and dependence on fossil fuels. One key to this plan was to decrease the amount of energy used to heat and cool our homes through government incentives. The EPA estimates that the average American household spends over $1000 annually for heating and cooling. 1 One of the most cost-effective ways of decreasing energy use in your home is to stop air penetration and increase the amount of insulation by installing insulated doors insulated windows and cavity wall insulation. But not all options are equally effective nor do they have equal costs. So how can consumers determine which option improves their homes' insulation the most? In this paper I present an analogy to simple resistor circuits that can be used by introductory students to answer this question.

Adele Poynor

2014-01-01T23:59:59.000Z

433

Multimode circuit QED with hybrid metamaterial transmission lines  

E-Print Network (OSTI)

Quantum transmission lines are a central to superconducting and hybrid quantum computing. Parallel to these developments are those of left-handed meta-materials. They have a wide variety of applications in photonics from the microwave to the visible range such as invisibility cloaks and perfect flat lenses. For classical guided microwaves, left-handed transmission lines have been proposed and studied on the macroscopic scale. We combine these ideas in presenting a left-handed/right-handed hybrid transmission line for applications in quantum optics on a chip. The resulting system allows circuit QED to reach a new regime: multi-mode ultra-strong coupling. Out of the many potential applications of this novel device, we discuss two; the preparation of multipartite entangled states and its use as a quantum simulator for the spin-boson model where a quantum phase transition is reached up to finite size-effects.

Daniel J. Egger; Frank K. Wilhelm

2013-02-22T23:59:59.000Z

434

Low Insertion HVDC Circuit Breaker: Magnetically Pulsed Hybrid Breaker for HVDC Power Distribution Protection  

SciTech Connect

GENI Project: General Atomics is developing a direct current (DC) circuit breaker that could protect the grid from faults 100 times faster than its alternating current (AC) counterparts. Circuit breakers are critical elements in any electrical system. At the grid level, their main function is to isolate parts of the grid where a fault has occurredsuch as a downed power line or a transformer explosionfrom the rest of the system. DC circuit breakers must interrupt the system during a fault much faster than AC circuit breakers to prevent possible damage to cables, converters and other grid-level components. General Atomics high-voltage DC circuit breaker would react in less than 1/1,000th of a second to interrupt current during a fault, preventing potential hazards to people and equipment.

None

2012-01-09T23:59:59.000Z

435

Focused ion beam damage to MOS integrated circuits  

SciTech Connect

Commercial focused ion beam (FIB) systems are commonly used to image integrated circuits (ICS) after device processing, especially in failure analysis applications. FIB systems are also often employed to repair faults in metal lines for otherwise functioning ICS, and are being evaluated for applications in film deposition and nanofabrication. A problem that is often seen in FIB imaging and repair is that ICS can be damaged during the exposure process. This can result in degraded response or out-right circuit failure. Because FIB processes typically require the surface of an IC to be exposed to an intense beam of 30--50 keV Ga{sup +} ions, both charging and secondary radiation damage are potential concerns. In previous studies, both types of effects have been suggested as possible causes of device degradation, depending on the type of device examined and/or the bias conditions. Understanding the causes of this damage is important for ICS that are imaged or repaired by a FIB between manufacture and operation, since the performance and reliability of a given IC is otherwise at risk in subsequent system application. In this summary, the authors discuss the relative roles of radiation damage and charging effects during FIB imaging. Data from exposures of packaged parts under controlled bias indicate the possibility for secondary radiation damage during FIB exposure. On the other hand, FIB exposure of unbiased wafers (a more common application) typically results in damage caused by high-voltage stress or electrostatic discharge. Implications for FIB exposure and subsequent IC use are discussed.

FLEETWOOD,D.M.; CAMPBELL,ANN N.; HEMBREE,CHARLES E.; TANGYUNYONG,PAIBOON; JESSING,JEFFREY R.; SODEN,JERRY M.

2000-05-10T23:59:59.000Z

436

Circuit bridging of digital equipment caused by smoke from a cable fire  

SciTech Connect

Advanced reactor systems are likely to use protection systems with digital electronics that ideally should be resistant to environmental hazards, including smoke from possible cable fires. Previous smoke tests have shown that digital safety systems can fail even at relatively low levels of smoke density and that short-term failures are likely to be caused by circuit bridging. Experiments were performed to examine these failures, with a focus on component packaging and protection schemes. Circuit bridging, which causes increased leakage currents and arcs, was gauged by measuring leakage currents among the leads of component packages. The resistance among circuit leads typically varies over a wide range, depending on the nature of the circuitry between the pins, bias conditions, circuit board material, etc. Resistance between leads can be as low as 20 k{Omega} and still be good, depending on the component. For these tests, the authors chose a printed circuit board and components that normally have an interlead resistance above 10{sup 12} {Omega}, but if the circuit is exposed to smoke, circuit bridging causes the resistance to fall below 10{sup 3} {Omega}. Plated-through-hole (PTH) and surface-mounted (SMT) packages were exposed to a series of different smoke environments using a mixture of environmentally qualified cables for fuel. Conformal coatings and enclosures were tested as circuit protection methods. High fuel levels, high humidity, and high flaming burns were the conditions most likely to cause circuit bridging. The inexpensive conformal coating that was tested - an acrylic spray - reduced leakage currents, but enclosure in a chassis with a fan did not. PTH packages were more resistant to smoke-induced circuit bridging than SMT packages. Active components failed most often in tests where the leakage currents were high, but failure did not always accompany high leakage currents.

Tanaka, T.J.; Anderson, D.J.

1997-03-01T23:59:59.000Z

437

Simulation of processes in natural-circulation circuits of heat-recovery boilers of combined cycle power plants  

Science Journals Connector (OSTI)

Mathematical fundamentals of development of models of natural-circulation circuits of heat-recovery boilers are considered. Processes in the high-pressure circuit of a P-96 boiler are described.

E. K. Arakelyan; A. S. Rubashkin; A. S. Obuvaev; V. A. Rubashkin

2009-02-01T23:59:59.000Z

438

Deep subwavelength plasmonic waveguide switch in double graphene layer structure  

E-Print Network (OSTI)

Deep subwavelength plasmonic waveguide switch in double graphene layer structure Hideo Iizuka in double graphene layer structure Hideo Iizuka1,a) and Shanhui Fan2,b) 1 Toyota Central Research December 2013) Graphene provides excellent prospects of the dynamic tunability, low propagation loss

Fan, Shanhui

439

Double quantum dot as a minimal thermoelectric generator  

Science Journals Connector (OSTI)

Based on numerical renormalization group calculations, we demonstrate that experimentally realized double quantum dots constitute a minimal thermoelectric generator. In the Kondo regime, one quantum dot acts as an n-type and the other one as a p-type thermoelectric device. Properly connected, a capacitively coupled double quantum dot provides a miniature power supply utilizing the thermal energy of the environment.

S. Donsa; S. Andergassen; K. Held

2014-03-05T23:59:59.000Z

440

Strategies for Next Generation Neutrinoless Double-Beta Decay Experiments  

E-Print Network (OSTI)

Strategies for Next Generation Neutrinoless Double-Beta Decay Experiments F. T. Avignone III A brief discussion of the connection between neutrino oscillation data and predictions of neutrinoless the necessary tools for comparative evaluation. 1. INTRODUCTION Neutrinoless double-beta (0)-decay has been

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Neutrinoless double-beta decay. A brief review  

E-Print Network (OSTI)

In this brief review we discuss the generation of Majorana neutrino masses through the see-saw mechanism, the theory of neutrinoless double-beta decay, the implications of neutrino oscillation data for the effective Majorana mass, taking into account the recent Daya Bay measurement of theta_13, and the interpretation of the results of neutrinoless double-beta decay experiments.

S. M. Bilenky; C. Giunti

2012-03-23T23:59:59.000Z

442

Radiopurity assessment of the tracking readout for the NEXT double beta decay experiment  

E-Print Network (OSTI)

The 'Neutrino Experiment with a Xenon Time-Projection Chamber' (NEXT) is intended to investigate the neutrinoless double beta decay of 136Xe, which requires a severe suppression of potential backgrounds; therefore, an extensive screening and selection process is underway to control the radiopurity levels of the materials to be used in the experimental set-up of NEXT. The detector design combines the measurement of the topological signature of the event for background discrimination with the energy resolution optimization. Separate energy and tracking readout planes are based on different sensors: photomultiplier tubes for calorimetry and silicon multi-pixel photon counters for tracking. The design of a radiopure tracking plane, in direct contact with the gas detector medium, was a challenge since the needed components have typically activities too large for experiments requiring ultra-low background conditions. Here, the radiopurity assessment of tracking readout components based on gamma-ray spectroscopy using ultra-low background germanium detectors at the Laboratorio Subterraneo de Canfranc (Spain) is described. According to the obtained results, radiopure enough printed circuit boards made of kapton and copper and silicon photomultipliers, fulfilling the requirements of an overall background level in that region of at most 8 x 10-4 counts keV-1 kg-1 y-1, have been identified.

V. lvarez; I. Bandac; A. I. Barrado; A. Bettini; F. I. G. M. Borges; M. Camargo; S. Crcel; S. Cebrin; A. Cervera; C. A. N. Conde; E. Conde; T. Dafni; J. Daz; R. Esteve; L. M. P. Fernandes; M. Fernndez; P. Ferrario; A. L. Ferreira; E. D. C. Freitas; V. M. Gehman; A. Goldschmidt; H. Gmez; J. J. Gmez-Cadenas; D. Gonzlez-Daz; R. M. Gutirrez; J. Hauptman; J. A. Hernando Morata; D. C. Herrera; F. J. Iguaz; I. G. Irastorza; L. Labarga; A. Laing; I. Liubarsky; D. Lorca; M. Losada; G. Luzn; A. Mar; J. Martn-Albo; A. Martnez; G. Martnez-Lema; T. Miller; F. Monrabal; M. Monserrate; C. M. B. Monteiro; F. J. Mora; L. M. Moutinho; J. Muoz Vidal; M. Nebot-Guinot; D. Nygren; C. A. B. Oliveira; A. Ortiz de Solrzano; J. Prez; J. L. Prez Aparicio; J. Renner; L. Ripoll; A. Rodrguez; J. Rodrguez; F. P. Santos; J. M. F. dos Santos; L. Segui; L. Serra; D. Shuman; A. Simn; C. Sofka; M. Sorel; J. F. Toledo; J. Torrent; Z. Tsamalaidze; J. F. C. A. Veloso; J. A. Villar; R. C. Webb; J. T. White; N. Yahlali

2014-11-05T23:59:59.000Z

443

The fraction of double degenerates among DA white dwarfs  

E-Print Network (OSTI)

We present the results of a radial velocity survey designed to measure the fraction of double degenerates among DA white dwarfs. The narrow core of the H-alpha line was observed twice or more for 46 white dwarfs yielding radial velocities accurate to a few km/s. This makes our survey the most sensitive to the detection of double degenerates undertaken to date. We found no new double degenerates in our sample, though H-alpha emission from distant companions is seen in two systems. Two stars known to be double degenerates prior to our observations are included in the analysis. We find a 95% probability that the fraction of double degenerates among DA white dwarfs lies in the range [0.017,0.19].

P. F. L. Maxted; T. R. Marsh

1999-01-20T23:59:59.000Z

444

Single- and double-charge exchange at low pion energies  

SciTech Connect

A review is given of pion single- and double-charge exchange reactions at incident energies of 25 to 65 MeV leading to isobaric analog states, and in the case of double-charge exchange leading to the ground state of the residual nucleus. The crucial role of the higher nuclear transparency at low pion energies for the analysis of the data in terms of single and double scattering is demonstrated. The large effects on double-charge exchange produced by the spatial correlations in nuclear wave functions are evident. The data on 1f{sub 7/2} nuclei at 35 MeV are used to establish the general validity of a shell-model-based two-amplitude model for these transitions. Recent measurements of the energy dependence between 25 and 65 MeV of double-charge exchange cross sections at forward angles are presented and discussed. 33 refs., 19 figs.

Baer, H.W.

1991-01-01T23:59:59.000Z

445

Numeric simulation of thyristor power converters taking into consideration the firing-circuits and the closed-loop control  

E-Print Network (OSTI)

Numeric simulation of thyristor power converters taking into consideration the firing-circuits and the closed-loop control

Bordry, Frederick; Proudlock, Paul

1988-01-01T23:59:59.000Z

446

Prediction of Multi-Physics Behaviors of Large Lithium-Ion Batteries During Internal and External Short Circuit (Presentation)  

SciTech Connect

This presentation describes the multi-physics behaviors of internal and external short circuits in large lithium-ion batteries.

Kim, G. H.; Lee, K. J.; Chaney, L.; Smith, K.; Darcy, E.; Pesaran, A.; Darcy, E.

2010-11-01T23:59:59.000Z

447

Fault (In)Dependent Cost Estimates and Conflict-Directed Backtracking to Guide Sequential Circuit Test Generation  

Science Journals Connector (OSTI)

The search for tests for sequential circuits (STPG) by deterministic test pattern generation is a process of alternately performing mandatory assignments and heuristic decisions on signal lines. We have observed problems in the decision-making process ... Keywords: ATPG, sequential circuit TPG, cost estimates, back-jumping, conflict-directed backtrack, three-state (tri-state) circuit TPG

Mario Konijnenburg; Hans Van der Linden; Ad van de Goor

1999-11-01T23:59:59.000Z

448

First results on neutrinoless double beta decay of Te-130 with the calorimetric cuoricino experiment  

E-Print Network (OSTI)

Evidence for Neutrinoless Double Beta Decay arXiv:hep-on Evidence for neutrinoless double beta decay- arXiv:hep-Results on Neutrinoless Double Beta Decay of 130 Te with the

2003-01-01T23:59:59.000Z

449

Half-lives of Double $\\beta ^+$-decay with Two Neutrinos  

E-Print Network (OSTI)

Nuclear double $\\beta ^-$-decays with two neutrinos were observed for many years and a systematic law describing the relation between their half-lives and decay energies was also proposed recently [Phys. Rev. C89, 064603 (2014)]. However, double $\\beta ^+$-decay ($\\beta ^+\\beta^+)$ with emission of both two positrons and two neutrinos has not been observed up to date. In this article, we perform a systematic analysis on the candidates of double $\\beta ^+$-decay, based on the 2012 nuclear mass table. Eight nuclei are found to be the good candidates for double $\\beta ^+$-decay and their half-lives are predicted according to the generalization of the systematic law to double $\\beta ^+$-decay. As far as we know, there is no theoretical result on double $\\beta ^+$-decay of nucleus $^{154}Dy$ and our result is the first prediction on this nucleus. This is also the first complete research on eight double $\\beta ^+$-decay candidates based on the available data of nuclear masses. It is expected that the calculated hal...

Ren, Yuejiao

2015-01-01T23:59:59.000Z

450

Automatic synthesis of quantum circuits for point addition on ordinary binary elliptic curves  

E-Print Network (OSTI)

Implementing the group arithmetic is a cost-critical task when designing quantum circuits for Shor's algorithm to solve the discrete logarithm problem. We introduce a tool for the automatic generation of addition circuits for ordinary binary elliptic curves, a prominent platform group for digital signatures. Our Python software generates circuit descriptions that, without increasing the number of qubits or T-depth, involve less than 39% of the number of T-gates in the best previous construction. The software also optimizes the (CNOT) depth for GF(2)-linear operations by means of suitable graph colorings.

Parshuram Budhathoki; Rainer Steinwandt

2014-01-10T23:59:59.000Z

451

A novel active quenching circuit for single photon detection with Geiger mode avalanche photodiodes  

E-Print Network (OSTI)

In this paper we present a novel construction of an active quenching circuit intended for single photon detection. For purpose of evaluation, we have combined this circuit with a standard avalanche photodiode C30902S to form a single photon detector. A series of measurements, presented here, show that this single photon detector has a dead time of less than 40ns, maximum random counting frequency of over 14MHz, low after pulsing, detection efficiency of over 20% and a good noise performance. This simple and robust active quenching circuit can be built from of-the-shelf electronic components and needs no complicated adjustments.

Mario Stipcevic

2008-05-18T23:59:59.000Z

452

Experimental research of double beta decay of atomic nuclei  

E-Print Network (OSTI)

Results of several double beta decay experiments, performed with the help of low background crystal scintillators, are presented. In particular, the half-life value of the two-neutrino double beta decay of 116-Cd has been measured as 2.9 10^{19} yr, and the new half-life limit on the neutrinoless double beta decay of 116-Cd has been established as >1.7 10^{23} yr at 90%, which corresponds to a restriction on the neutrino mass <1.7 eV. New half-life bounds on the level of 10^{17}-10^{21} yr were set for double beta processes in 64-Zn, 70-Zn, 106-Cd, 108-Cd, 114-Cd, 136-Ce, 138-Ce, 142-Ce, 160-Gd, 180-W, and 186-W by using low-background CdWO4, GSO, and ZnWO4 crystal scintillators. The claim of discovery of the neutrinoless double beta decay of 76-Ge [Mod. Phys. Lett. A 16 (2001) 2409] was analyzed. The demands of the future high sensitivity double beta decay experiments, aiming to observe the neutrinoless double beta decay or to advance restrictions on the neutrino mass to < 0.01 eV, were considered. Requirements for their sensitivity and discovery potential were formulated. Two projects of double beta experiments with a sensitivity on the level of 10^{26}-10^{27} yr (CAMEO and CARVEL projects) were discussed. Scintillation properties and radioactive contamination of CaWO4, ZnWO4, CdWO4, PbWO4, GSO(Ce), CeF3, yttrium-aluminum garnet doped with neodymium (YAG:Nd) crystal scintillators were studied. Applicability of these scintillators to search for double beta decay was discussed.

F. A. Danevich

2011-12-26T23:59:59.000Z

453

Superconvergence of period doubling cascade in trapezoid maps  

E-Print Network (OSTI)

In the symmetric and the asymmetric trapezoid maps, as a slope of the trapezoid is increased, the period doubling cascade occurs and the symbolic sequence of periodic points is the Metropolis-Stein-Stein sequence and the convergence of the onset point of the period 2^m solution to the accumulation point is exponentially fast. We reported these results previously. In this paper, we give the detailed description of the proof on the results. Further, we study the period doubling cascade starting from period p solution and show the superconvergence of the period doubling cascade.

T. Uezu

2000-01-12T23:59:59.000Z

454

Photo-double-ionization of the nitrogen molecule  

Science Journals Connector (OSTI)

The triple differential cross sections of the photo-double-ionization of the nitrogen molecule to the X 1?+g and a3?u N22+ states have been measured at about 20 eV above their respective ionization thresholds in the equal energy sharing kinematics and calculated using a model which makes use of correlated two-center double continuum wave functions. The comparison of the results with those obtained by the Gaussian parametrization method applied in the past with success to heliumlike targets shows the influence of the molecular nature of the N2 target in the photo-double-ionization.

P. Bolognesi; B. Joulakian; A. A. Bulychev; O. Chuluunbaatar; L. Avaldi

2014-05-07T23:59:59.000Z

455

E-Print Network 3.0 - aligned double-walled carbon Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary: , and H. M. Cheng. Polarized raman analysis of aligned double- walled carbon nanotubes. Physical Review B... Nonlinear Oscillations of a Double-Walled Carbon Nanotube...

456

Neutrinoless double beta decay in deformed nuclei: its implications in particle and nuclear physics .  

E-Print Network (OSTI)

??In my thesis, we calculated the Nuclear Matrix Elements (NME) for neutrinoless double beta decay (0??? decay). Neutrinoless double beta decay is a rare nuclear (more)

Fang, DongLiang

2011-01-01T23:59:59.000Z

457

SciTech Connect: What can we learn from neutrinoless double beta...  

Office of Scientific and Technical Information (OSTI)

What can we learn from neutrinoless double beta decay experiments? Citation Details In-Document Search Title: What can we learn from neutrinoless double beta decay experiments?...

458

A Search for Neutrinoless Double-Beta Decay with EXO-200 .  

E-Print Network (OSTI)

??This work presents a search for neutrinoless double beta decay of 136Xe using data from the EXO-200 detector collected between 2011 and 2012. Neutrinoless double (more)

Slutsky, Simon

2013-01-01T23:59:59.000Z

459

Digital quantum simulation of fermionic models with a superconducting circuit  

E-Print Network (OSTI)

Simulating quantum physics with a device which itself is quantum mechanical, a notion Richard Feynman originated, would be an unparallelled computational resource. However, the universal quantum simulation of fermionic systems is daunting due to their particle statistics, and Feynman left as an open question whether it could be done, because of the need for non-local control. Here, we implement fermionic interactions with digital techniques in a superconducting circuit. Focusing on the Hubbard model, we perform time evolution with constant interactions as well as a dynamic phase transition with up to four fermionic modes encoded in four qubits. The implemented digital approach is universal and allows for the efficient simulation of fermions in arbitrary spatial dimensions. We use in excess of 300 single-qubit and two-qubit gates, and reach global fidelities which are limited by gate errors. This demonstration highlights the feasibility of the digital approach and opens a viable route towards analog-digital quantum simulation of interacting fermions and bosons in large-scale solid state systems.

R. Barends; L. Lamata; J. Kelly; L. Garca-lvarez; A. G. Fowler; A. Megrant; E. Jeffrey; T. C. White; D. Sank; J. Y. Mutus; B. Campbell; Yu Chen; Z. Chen; B. Chiaro; A. Dunsworth; I. -C. Hoi; C. Neill; P. J. J. O'Malley; C. Quintana; P. Roushan; A. Vainsencher; J. Wenner; E. Solano; John M. Martinis

2015-01-30T23:59:59.000Z

460

Mass Transfer between Double White Dwarfs  

E-Print Network (OSTI)

Three periodically variable stars have recently been discovered (V407 Vul, P=9.5 min; ES Cet, P=10.3 min; RX J0806.3+1527, P=5.3 min) with properties that suggest that their photometric periods are also their orbital periods, making them the most compact binary stars known. If true, this might indicate that close, detached, double white dwarfs are able to survive the onset of mass transfer caused by gravitational wave radiation and emerge as the semi-detached, hydrogen-deficient stars known as the AM CVn stars. The accreting white dwarfs in such systems are large compared to the orbital separations. This has two effects: first it makes it likely that the mass transfer stream can hit the accretor directly, and second it causes a loss of angular momentum from the orbit which can destabilise the mass transfer unless the angular momentum lost to the accretor can be transferred back to the orbit. The effect of the destabilisation is to reduce the number of systems which survive mass transfer by as much as one hundred-fold. In this paper we analyse this destabilisation and the stabilising effect of a dissipative torque between the accretor and the binary orbit. We obtain analytic criteria for the stability of both disc-fed and direct impact accretion, and carry out numerical integrations to assess the importance of secondary effects, the chief one being that otherwise stable systems can exceed the Eddington accretion rate. We show that to have any effect upon survival rates, the synchronising torque must act on a timescale of order 1000 years or less. If synchronisation torques are this strong, then they will play a significant role in the spin rates of white dwarfs in cataclysmic variable stars as well.

T. R. Marsh; G. Nelemans; D. Steeghs

2003-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Edison Revisited: Should we use DC Circuits for Lighting in Commercial  

NLE Websites -- All DOE Office Websites (Extended Search)

Edison Revisited: Should we use DC Circuits for Lighting in Commercial Edison Revisited: Should we use DC Circuits for Lighting in Commercial Buildings? Speaker(s): Brinda Thomas Date: March 7, 2012 - 12:30pm Location: 90-3122 Seminar Host/Point of Contact: Chris Marnay This seminar summarizes work from a forthcoming Energy Policy paper and thoughts on future work to understand the economics of DC building circuits. We examined the economic feasibility of a general application of DC building circuits to operate commercial lighting systems. We compare light-emitting diodes (LEDs) and fluorescents that are powered by either a central DC power supply or traditional AC grid electricity, with and without solar photovoltaics (PV) and battery back-up. We find that there are limited life-cycle ownership cost and capital cost benefits of DC

462

Photo-induced trimming of chalcogenide-assisted silicon photonic circuits  

E-Print Network (OSTI)

We present an innovative and efficient technique for post-fabrication trimming of silicon photonic integrated circuits (PICs). Our approach exploits the high photosensitivity of chalcogenide glasses (ChGs) to induce local ...

Melloni, Andrea

463

Simulation and visualization of fields and energy flows in electric circuits with idealized geometries  

E-Print Network (OSTI)

This thesis develops a method to simulate and visualize the fields and energy flows in electric circuits, using a simplified physical model based on an idealized geometry. The physical models combine and extend previously ...

Ohannessian, Mesrob I., 1981-

2005-01-01T23:59:59.000Z

464

An engineering model of lower thalamo-cortico-basal ganglionic circuit function  

E-Print Network (OSTI)

An engineering model of lower thalamo-cortico-basal ganglionic circuit functionality was extended and tested. This model attempts to explain the circuitry of the basal ganglia, examine its functional properties, and integrate ...

Lim, Eugene J. (Eugene Jungsud), 1980-

2003-01-01T23:59:59.000Z

465

Optical Packet and Circuit Integrated Networks and Software Defined Networking Extension  

Science Journals Connector (OSTI)

An optical packet and circuit integrated network (OPCInet) provides both high-speed, inexpensive services and deterministic-delay, low-data-loss services according to the users usage...

Harai, Hiroaki; Furukawa, Hideaki; Fujikawa, Kenji; Miyazawa, Takaya; Wada, Naoya

2014-01-01T23:59:59.000Z

466

Challenges in Ultra Deep Submicrometer High Performance VLSI Circuits Professor Eby G. Friedman  

E-Print Network (OSTI)

Department of Electrical and Computer Engineering University of Rochester Abstract Fundamental trends. Attention is placed on distinguishing between local vs. global issues. Topics such as dual Vt CMOS circuits

Friedman, Eby G.

467

A UVLO Circuit in SiC Compatible with Power MOSFET Integration  

SciTech Connect

The design and test of the first undervoltage lock-out circuit implemented in a low voltage 4H silicon carbide process capable of single-chip integration with power MOSFETs is presented. The lock-out circuit, a block of the protection circuitry of a single-chip gate driver topology designed for use in a plug-in hybrid vehicle charger, was demonstrated to have rise/fall times compatible with a MOSFET switching speed of 250 kHz while operating over the targeted operating temperature range between 0 C and 200 C. Captured data shows the circuit to be functional over a temperature range from -55 C to 300 C. The design of the circuit and test results is presented.

Glover, Michael [APEI, Inc.; Shepherd, Paul [APEI, Inc.; Francis, Matt [APEI, Inc.; Mudholkar, Dr. Mihir [University of Arkansas; Mantooth, Alan [University of Arkansas; Ericson, Milton Nance [ORNL; Frank, Steven [ORNL; Britton Jr, Charles L [ORNL; Marlino, Laura D [ORNL; Mcnutt, Tyler [APEI, Inc.; Barkley, Dr. Adam [APEI, Inc.; Whitaker, Mr. Bret [APEI, Inc.; Lostetter, Dr. Alex [APEI, Inc.

2014-01-01T23:59:59.000Z

468

A UVLO Circuit in SiC Compatible with Power MOSFET Integration (pending entry)  

SciTech Connect

The design and test of the first undervoltage lock-out circuit implemented in a low-voltage 4H silicon carbide process capable of single-chip integration with power MOSFETs is presented. The lock-out circuit, a block of the protection circuitry of a single-chip gate driver topology designed for use in a plug-in hybrid vehicle charger, was demonstrated to have rise/fall times compatible with a MOSFET switching speed of 250 kHz while operating over the targeted operating temperature range between 0 C and 200 C. Captured data show the circuit to be functional over a temperature range from -55 C to 300 C. The design of the circuit and test results is presented.

Ericson, Milton Nance [ORNL; Frank, Steven Shane [ORNL; Glover, Dr. Michael [University of Arkansas; Britton, Charles [Oak Ridge National Laboratory (ORNL); Francis, Dr. Matt [University of Arkansas; Mantooth, Alan [University of Arkansas; Marlino, Laura D [ORNL; Mcnutt, Tyler [APEI, Inc.; Mudholkar, Dr. Mihir [University of Arkansas; Shepherd, Dr. Paul [University of Arkansas; Whitaker, Mr. Bret [APEI, Inc.; Barkley, Dr. Adam [APEI, Inc.; Lotstetter, Alex [APEI, Inc.

2014-01-01T23:59:59.000Z

469

Materials and devices for optical switching and modulation of photonic integrated circuits  

E-Print Network (OSTI)

The drive towards photonic integrated circuits (PIC) necessitates the development of new devices and materials capable of achieving miniaturization and integration on a CMOS compatible platform. Optical switching: fast ...

Seneviratne, Dilan Anuradha

2007-01-01T23:59:59.000Z

470

Regenerative Feedback Resonant Circuit to Detect Transient Changes in Electromagnetic Properties of Semi-Insulating Materials  

SciTech Connect

A prototype regenerative feedback resonant circuit has been developed for measuring the transient spectral response due to perturbations in properties of various electromagnetic materials. The circuit can accommodate a variety of cavity resonators, shown here in the 8 GHz range, with passive quality factors (Qstat) as high as 7,000 depending upon material loading. The positive feedback enhanced dynamic quality factors (Qdyn) of resonator/material combinations in the regenerative circuit are on the order of 107 - 108. The theory, design, and implementation of the circuit is discussed along with real-time monitored example measurements of effects due to photon-induced charge carriers in high-resistivity silicon wafers and magnetic-field induced perturbations of yttrium-iron garnet.

Jones, Anthony M.; Kelly, James F.; Severtsen, Ronald H.; McCloy, John S.

2013-08-08T23:59:59.000Z

471

The Study on Phase-Control of Vacuum Circuit Breaker for Electric Railway Substation  

Science Journals Connector (OSTI)

Through analyzing the points of the vacuum circuit breaker with permanent magnet mechanism, which is high accuracy in the switching time (that means the phase accuracy when switching on or switching off the ci...

Jie Bai; KeLiang Shu; XiaoDong Tan

2012-01-01T23:59:59.000Z

472

Detection and removal of functional redundancy in multi-level logic circuits  

E-Print Network (OSTI)

Whenever digital designs are created, they may contain many logic redundancies. Minimization tools are then used to remove these redundancies. The minimized circuit should be smaller, faster, and cheaper while still behaving like the original...

Dorsey, David Michael

2013-02-22T23:59:59.000Z

473

Ultrasonic Motors H-Bridge Control Circuit Using Phase-Shift PWM Method  

Science Journals Connector (OSTI)

Ultrasonic motor is a special kind of actuator for motion control system. Because of the peculiar mechanism of ultrasonic motor, control circuit is needed for the operation of ultrasonic motor. The performance of...

Shi Jingzhuo; Zhang Yanan

2014-06-01T23:59:59.000Z

474

Characterization and requirements for Cu-Cu bonds for three-dimensional integrated circuits  

E-Print Network (OSTI)

Three-dimensional integrated circuit (3D IC) technology enables heterogeneous integration of devices fabricated from different technologies, and reduces global RC delay by increasing the device density per unit chip area. ...

Tadepalli, Rajappa, 1979-

2007-01-01T23:59:59.000Z

475

Integrated circuit failure analysis by low-energy charge-induced voltage alteration  

DOE Patents (OSTI)

A scanning electron microscope apparatus and method are described for detecting and imaging open-circuit defects in an integrated circuit (IC). The invention uses a low-energy high-current focused electron beam that is scanned over a device surface of the IC to generate a charge-induced voltage alteration (CIVA) signal at the location of any open-circuit defects. The low-energy CIVA signal may be used to generate an image of the IC showing the location of any open-circuit defects. A low electron beam energy is used to prevent electrical breakdown in any passivation layers in the IC and to minimize radiation damage to the IC. The invention has uses for IC failure analysis, for production-line inspection of ICs, and for qualification of ICs. 5 figs.

Cole, E.I. Jr.

1996-06-04T23:59:59.000Z

476

March 17, 2011 18:51 ws-jcsc Journal of Circuits, Systems, and Computers  

E-Print Network (OSTI)

March 17, 2011 18:51 ws-jcsc Journal of Circuits, Systems, and Computers c World Scientific results in a latency of hundreds of cycles, and most of these cycles are often 1 #12;March 17, 2011 18

Koppelman, David M.

477

A Retrofit 60 Hz Current Sensor for Power Monitoring at the Circuit Breaker Panel  

E-Print Network (OSTI)

Improved signal conditioning electronics and new experimental results are presented for a sensor that measures current flow in a circuit breaker. A PIC microcontroller optimizes the phase reference for the synchronous ...

Cooley, John J.

478

Low-voltage, low-power circuits for data communication systems  

E-Print Network (OSTI)

There are growing industrial demands for low-voltage supply and low-power consumption circuits and systems. This is especially true for very high integration level and very large scale integrated (VLSI) mixed-signal chips and system...

Chen, Mingdeng

2005-02-17T23:59:59.000Z

479

Integrated circuit failure analysis by low-energy charge-induced voltage alteration  

DOE Patents (OSTI)

A scanning electron microscope apparatus and method are described for detecting and imaging open-circuit defects in an integrated circuit (IC). The invention uses a low-energy high-current focused electron beam that is scanned over a device surface of the IC to generate a charge-induced voltage alteration (CIVA) signal at the location of any open-circuit defects. The low-energy CIVA signal may be used to generate an image of the IC showing the location of any open-circuit defects. A low electron beam energy is used to prevent electrical breakdown in any passivation layers in the IC and to minimize radiation damage to the IC. The invention has uses for IC failure analysis, for production-line inspection of ICs, and for qualification of ICs.

Cole, Jr., Edward I. (2116 White Cloud St., NE., Albuquerque, NM 87112)

1996-01-01T23:59:59.000Z

480

Reliability-yield allocation for semiconductor integrated circuits: modeling and optimization  

E-Print Network (OSTI)

This research develops yield and reliability models for fault-tolerant semiconductor integrated circuits and develops optimization algorithms that can be directly applied to these models. Since defects cause failures in microelectronics systems...

Ha, Chunghun

2005-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "double circuit 230-kv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Revision 1, Submitted to IEEE Transactions on Computer-Aided Design Logic Synthesis of Multilevel Circuits  

E-Print Network (OSTI)

detection capability, it requires a large area overhead. Recently, research has been done on using automated logic synthesis techniques (such as those used in MIS [Brayton 87a]) to design multilevel circuits

Stanford University

482

Studies of the thermal circuit of an advanced integrated gasification combined-cycle power plant  

Science Journals Connector (OSTI)

The results obtained from a study of the thermal circuit of a combined-cycle plant with coal gasification are presented, and ... of producer gas and calculated values of the combined-cycle power plant efficiency ...

D. G. Grigoruk; A. V. Turkin

2010-02-01T23:59:59.000Z

483

Short circuit tests on a 150 kJ, 1 Hz repetitive Plasma Focus  

Science Journals Connector (OSTI)

This work presents the results of short circuit tests recently conducted on PFMA1 [1], a 150 kJ Mather-type Plasma Focus [2] designed to run at a...

M. Frignani; S. Mannucci; D. Mostacci; F. Rocchi

2006-10-01T23:59:59.000Z

484

Dissecting Single-Molecule Signal Transduction in Carbon Nanotube Circuits with Protein Engineering  

E-Print Network (OSTI)

Dissecting Single-Molecule Signal Transduction in Carbon Nanotube Circuits with Protein Engineering Supporting Information ABSTRACT: Single-molecule experimental methods have provided new insights measurements. A novel, non uorescent single-molecule technique involves attaching single molecules to single

Weiss, Gregory A.

485

Methodologies for statistical behavioral modeling and simulation of complex analog integrated circuits  

E-Print Network (OSTI)

The objective of this thesis is to develop efficient methodologies for statistical behavioral modeling of analog integrated circuits and apply them to practical problems. Through appropriate statistical modeling, the Design for Quality (DFQ...

Swidzinski, Jan

2012-06-07T23:59:59.000Z

486

Scalable Fluidic Injector Arrays for Viral Targeting of Intact 3-D Brain Circuits  

E-Print Network (OSTI)

Our understanding of neural circuits--how they mediate the computations that subserve sensation, thought, emotion, and action, and how they are corrupted in neurological and psychiatric disorders--would be greatly facilitated ...

Chan, Stephanie

487

DUF6 Project Doubles Production in 2013 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DUF6 Project Doubles Production in 2013 DUF6 Project Doubles Production in 2013 DUF6 Project Doubles Production in 2013 November 26, 2013 - 12:00pm Addthis LEXINGTON, Ky. - The conversion plants at EM's Paducah and Portsmouth sites surpassed a fiscal year 2013 goal by converting 13,679 metric tons of depleted uranium hexafluoride (DUF6), more than doubling production a year earlier. EM's Portsmouth Paducah Project Office (PPPO) and contractor Babcock & Wilcox Conversion Services LLC (BWCS) began operations in 2011 to convert the nation's 800,000-metric-ton inventory of DUF6 to more benign forms for sale, ultimate disposal or long-term storage. "Since 2011, we have been ramping up production to determine and achieve the safe, sustainable operating rate of the plants," said George E.

488

Non-Double-Couple Microearthquakes At Long Valley Caldera, California,  

Open Energy Info (EERE)

Non-Double-Couple Microearthquakes At Long Valley Caldera, California, Non-Double-Couple Microearthquakes At Long Valley Caldera, California, Provide Evidence For Hydraulic Fracturing Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Non-Double-Couple Microearthquakes At Long Valley Caldera, California, Provide Evidence For Hydraulic Fracturing Details Activities (1) Areas (1) Regions (0) Abstract: Most of 26 small (0.4<~M<~3.1) microearthquakes at Long Valley caldera in mid-1997, analyzed using data from a dense temporary network of 69 digital three-component seismometers, have significantly non-double-couple focal mechanisms, inconsistent with simple shear faulting. We determined their mechanisms by inverting P- and S-wave polarities and amplitude ratios using linear-programming methods, and

489

DUF6 Project Doubles Production in 2013 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DUF6 Project Doubles Production in 2013 DUF6 Project Doubles Production in 2013 DUF6 Project Doubles Production in 2013 November 26, 2013 - 12:00pm Addthis LEXINGTON, Ky. - The conversion plants at EM's Paducah and Portsmouth sites surpassed a fiscal year 2013 goal by converting 13,679 metric tons of depleted uranium hexafluoride (DUF6), more than doubling production a year earlier. EM's Portsmouth Paducah Project Office (PPPO) and contractor Babcock & Wilcox Conversion Services LLC (BWCS) began operations in 2011 to convert the nation's 800,000-metric-ton inventory of DUF6 to more benign forms for sale, ultimate disposal or long-term storage. "Since 2011, we have been ramping up production to determine and achieve the safe, sustainable operating rate of the plants," said George E.

490

Kinetic Alfven double layer formed by electron viscosity  

SciTech Connect

The effect of the electron viscosity on the kinetic Alfven solitary wave is investigated. It is found that small electron viscosity changes the electron motion along the magnetic field producing a boundary layer, and thus that in a low beta electron-ion plasma({beta} Much-Less-Than m{sub e}/m{sub i}), an obliquely propagating kinetic solitary Alfven wave can become a double layer. This double layer can exist in the sub-Alfvenic and super-Alfvenic regimes. The length scale of density drop for this double layer is on the order of that of the conventional kinetic solitary Alfven wave, and thus this double layer can accelerate electrons on a very short length scale.

Woo, M. H.; Ryu, C.-M. [Department of Physics, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); Choi, C. R. [Department of Physics, Korea Advanced Institute of Science and Technology, Taejon 305-701 (Korea, Republic of)

2012-07-15T23:59:59.000Z

491

Superconductivity in Bundles of Double-Wall Carbon Nanotubes  

E-Print Network (OSTI)

We present electrical and thermal specific heat measurements that show superconductivity in double-wall carbon nanotube (DWCNT) bundles. Clear evidence, comprising a resistance drop as a function of temperature, magnetoresistance ...

Shi, Wu

492

Characterization of double walled carbon nanotubes-polyvinylidene fluoride nanocomposites  

E-Print Network (OSTI)

One of the main objectives of this thesis is to disperse double-walled carbon nanotubes (DWNT) in a polyvinylidene fluoride (PVDF) matrix, and to characterize the resulting composite using electrical, thermal, and mechanical characterization...

Almasri, Atheer Mohammad

2007-04-25T23:59:59.000Z

493

Student's difficulties with the theory of double-slit interference  

E-Print Network (OSTI)

developed abstract thinking abilities [3, 4]. The remainder are unable to learn physics by listening arrangement for theoretical treatment of double-slit interference. Figure 2. The mechanical device

Planin?iè, Gorazd

494

Youngs double-slit interference experiment with electrons  

Science Journals Connector (OSTI)

In this short Note we report a method for producing samples containing two nano-sized slits suitable for demonstrating to undergraduate and graduate students the double-slit electron interference experiment in a conventional transmission electron microscope.

S. Frabboni; G. C. Gazzadi; G. Pozzi

2007-01-01T23:59:59.000Z

495

Comment on "Evidence for Neutrinoless Double Beta Decay"  

E-Print Network (OSTI)

We comment on the recent claim for the experimental observation of neutrinoless double-beta decay. We discuss several limitations in the analysis provided in that paper and conclude that there is no basis for the presented claim.

C. E. Aalseth; F. T. Avignone III; A. Barabash; F. Boehm; R. L. Brodzinski; J. I. Collar; P. J. Doe; H. Ejiri; S. R. Elliott; E. Fiorini; R. J. Gaitskell; G. Gratta; R. Hazama; K. Kazkaz; G. S. King III; R. T. Kouzes; H. S. Miley; M. K. Moe; A. Morales; J. Morales; A. Piepke; R. G. H. Robertson; W. Tornow; P. Vogel; R. A. Warner; J. F. Wilkerson

2002-05-22T23:59:59.000Z

496

Double Auction experiments and their relevance for emissions trading  

Science Journals Connector (OSTI)

In this article, we discuss selected methodological problems from previous Double Auction (DA) experiments and analyze the two following questions experimentally. Firstly, does the framing of the decision situati...

Bodo Sturm

2008-01-01T23:59:59.000Z

497

Glass Does a Double-Take | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

| 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed Glass Does a Double-Take APRIL 4, 2008 Bookmark and Share Predicted phase diagram as a...

498

Double beta decay experiments: beginning of a new era  

E-Print Network (OSTI)

The review of current experiments on search and studying of double beta decay processes is done. Results of the most sensitive experiments are discussed and values of modern limits on effective Majorana neutrino mass ($) are given. New results on two neutrino double beta decay are presented. The special attention is given to new current experiments with mass of studied isotopes more than 100 kg, EXO--200 and KamLAND--Zen. These experiments open a new era in research of double beta decay. In the second part of the review prospects of search for neutrinoless double beta decay in new experiments with sensitivity to $$ at the level of $\\sim 0.01-0.1$ eV are discussed. Parameters and characteristics of the most perspective projects (CUORE, GERDA, MAJORANA, SuperNEMO, EXO, KamLAND--Zen, SNO+) are given.

A. S. Barabash

2012-09-19T23:59:59.000Z

499

A measurement of the 2 neutrino double beta decay rate of Te-130 in the CUORICINO experiment  

E-Print Network (OSTI)

CUORICINO in the LNGS underground facility Circuit used forin the LNGS underground facility. Natural radioactivity in

Kogler, Laura

2012-01-01T23:59:59.000Z

500

A measurement of the 2 neutrino double beta decay rate of 130Te in the CUORICINO experiment  

E-Print Network (OSTI)

CUORICINO in the LNGS underground facility Circuit used forin the LNGS underground facility. Natural radioactivity in

Kogler, Laura Katherine

2011-01-01T23:59:59.000Z