Powered by Deep Web Technologies
Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

DOE Requires Manufacturer and Labeler to Cease Sale of Incandescent...  

Broader source: Energy.gov (indexed) [DOE]

Manufacturer and Labeler to Cease Sale of Incandescent Reflector Lamps DOE Requires Manufacturer and Labeler to Cease Sale of Incandescent Reflector Lamps June 24, 2010 - 2:40pm...

2

DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air...  

Broader source: Energy.gov (indexed) [DOE]

Minimum Appliance Standards DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards June 3, 2010 - 2:17pm Addthis...

3

DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners  

Broader source: Energy.gov (indexed) [DOE]

Requires Manufacturers to Halt Sales of Heat Pumps and Air Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards June 3, 2010 - 12:00am Addthis Washington, DC - Today, the Department of Energy announced that three manufacturers -- Aspen Manufacturing, Inc., Summit Manufacturing, and Advanced Distributor Products -- must stop distributing 61 heat pump models and 1 air conditioner model that DOE has determined do not comply with federal energy conservation standards. The manufacturers also must notify all of their customers that have been sold noncompliant units. The Department determined that these models were noncompliant based on certification information submitted to DOE for these manufacturers.

4

DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners  

Broader source: Energy.gov (indexed) [DOE]

Requires Manufacturers to Halt Sales of Heat Pumps and Air Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards June 3, 2010 - 2:17pm Addthis Today, the Department of Energy announced that three manufacturers -- Aspen Manufacturing, Inc., Summit Manufacturing, and Advanced Distributor Products -- must stop distributing 61 heat pump models and 1 air conditioner model that DOE has determined do not comply with federal energy conservation standards. The manufacturers also must notify all of their customers that have been sold noncompliant units. The Department determined that these models were noncompliant based on certification information submitted to DOE for these manufacturers.

5

DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners  

Broader source: Energy.gov (indexed) [DOE]

Manufacturers to Halt Sales of Heat Pumps and Air Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards June 3, 2010 - 2:17pm Addthis Today, the Department of Energy announced that three manufacturers -- Aspen Manufacturing, Inc., Summit Manufacturing, and Advanced Distributor Products -- must stop distributing 61 heat pump models and 1 air conditioner model that DOE has determined do not comply with federal energy conservation standards. The manufacturers also must notify all of their customers that have been sold noncompliant units. The Department determined that these models were noncompliant based on certification information submitted to DOE for these manufacturers.

6

Requirements & Status for Volume Fuel Cell Manufacturing  

E-Print Network [OSTI]

Requirements & Status for Volume Fuel Cell Manufacturing DOE Hydrogen Program, Washington, DC July ­Eliminate components, parts and process steps ­Standardize core components across products ­Standardize non-core

7

Requirements for status for volume fuel cell manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Status for Volume Status for Volume Fuel Cell Manufacturing DOE Hydrogen Program, Washington, DC July 13-14, 2005 Requirements for Manufactured Fuel Cells Customer Requirements: Commercial Plant Study - Volume: 250,000 fuel stacks per year - Cost: $30/kw net Requirements for Manufactured Fuel Cells Commercial Volume Manufacturing - Material Utilization: >85% - Controlled Environments (Humidity, temperature, dust) - Environmentally safe direct and indirect materials - Hydrogen safety - Make or Buy Decisions on non/proprietary unit cell components - Integrated strategic supply chain - Design for Manufacturing, Assembly, and Service Requirements for Manufactured Fuel Cells Quality Control & Assurance - Accelerated tests and process parameters correlated to key product requirements (QFD)

8

Industrial Activities at DOE: Efficiency, Manufacturing, Process...  

Energy Savers [EERE]

Process, and Materials R&D Overview of industrial activities at DOE by Joe Cresko, EERE Advanced Manufacturing Office, at the EERE QC Workshop held December 9-10, 2013, at the...

9

DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program...  

Office of Environmental Management (EM)

DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program Presented at the NREL Hydrogen and Fuel Cell...

10

DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers  

Broader source: Energy.gov (indexed) [DOE]

Initiates Enforcement Actions Against 4 Showerhead Initiates Enforcement Actions Against 4 Showerhead Manufacturers (Notice of Proposed Civil Penalty and Requests for Test Data Issued) DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers (Notice of Proposed Civil Penalty and Requests for Test Data Issued) March 7, 2010 - 3:41pm Addthis The Office of General Counsel has issued a Notice of Proposed Civil Penalty to Hudson-Reed Limited for failing to certify to DOE that showerheads manufactured or distributed within the United States meet the applicable water conservation standards as required by the Energy Policy and Conservation Act (EPCA) and DOE regulations. This Notice of Proposed Civil Penalty proposes payments to the government of $1,920,200. Under federal law, manufacturers of some products covered by EPCA are required to

11

DOE Institutes Enforcement Action against 4 Showerhead Manufacturers for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Institutes Enforcement Action against 4 Showerhead Institutes Enforcement Action against 4 Showerhead Manufacturers for Failure to Certify 116 Products DOE Institutes Enforcement Action against 4 Showerhead Manufacturers for Failure to Certify 116 Products January 28, 2010 - 1:49pm Addthis WASHINGTON DC - The Office of General Counsel has issued Notices of Proposed Civil Penalty to Zoe Industries, Altmans Products LLC, EZ-FLO International, and Watermark Designs, Ltd. for failing to certify to the Department of Energy that showerheads manufactured or distributed by these companies meet the applicable water conservation standard as required by the Energy Policy Conservation Act and DOE's regulations. These Notices of Proposed Civil Penalty collectively propose payments to the government of over $3 million. Unless the manufacturers settle these claims within

12

DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers...  

Office of Environmental Management (EM)

Against 4 Showerhead Manufacturers (Notice of Proposed Civil Penalty and Requests for Test Data Issued) DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers...

13

DOE Collects $80,000 Civil Penalty From Showerhead Manufacturer...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Collects 80,000 Civil Penalty From Showerhead Manufacturer DOE Collects 80,000 Civil Penalty From Showerhead Manufacturer August 10, 2011 - 4:54pm Addthis The DOE Office of...

14

DOE Challenge Home, Washington Program Requirements | Department...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications DOE Challenge Home, California Program Requirements Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) DOE...

15

Optical manufacturing requirements for an AVLIS plant  

SciTech Connect (OSTI)

A uranium enrichment plant utilizing Atomic Vapor Laser Isotope Separation (AVLIS) technology is currently being planned. Deployment of the Plant will require tens of thousands of commercial and custom optical components and subsystems. The Plant optical system will be expected to perform at a high level of optical efficiency and reliability in a high-average-power-laser production environment. During construction, demand for this large number of optics must be coordinated with the manufacturing capacity of the optical industry. The general requirements and approach to ensure supply of optical components is described. Dynamic planning and a closely coupled relationship with the optics industry will be required to control cost, schedule, and quality.

Primdahl, K.; Chow, R.; Taylor, J.R.

1997-07-14T23:59:59.000Z

16

DOE Challenge Home, California Program Requirements  

Broader source: Energy.gov [DOE]

DOE Challenge Home, California Program Requirements, as posted on the U.S. Department of Energy's DOE Challenge Home website.

17

DOE Hydrogen Analysis Repository: PEMFC Manufacturing Cost  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PEMFC Manufacturing Cost PEMFC Manufacturing Cost Project Summary Full Title: Manufacturing Cost of Stationary Polymer Electrolyte Membrane (PEM) Fuel Cell Systems Project ID: 85 Principal Investigator: Brian James Keywords: Costs; fuel cells; stationary Performer Principal Investigator: Brian James Organization: Directed Technologies, Inc. (DTI) Address: 3601 Wilson Blvd., Suite 650 Arlington, VA 22201 Telephone: 703-243-3383 Email: brian_james@directedtechnologies.com Period of Performance End: November 1999 Project Description Type of Project: Analysis Category: Cross-Cutting Objectives: Estimate the cost of the fuel cell system using the Directed Technologies, Inc. cost database built up over the several years under U.S. Department of Energy and Ford Motor Company contracts.

18

DOE Warns Manufacturers Who Submitted Incomplete Certification Reports |  

Broader source: Energy.gov (indexed) [DOE]

Warns Manufacturers Who Submitted Incomplete Certification Warns Manufacturers Who Submitted Incomplete Certification Reports DOE Warns Manufacturers Who Submitted Incomplete Certification Reports February 2, 2010 - 1:53pm Addthis Washington, DC - The Department of Energy's Office of General Counsel has sent warning letters to 9 manufacturers or trade associations that submitted incomplete energy-efficiency test data to comply with DOE's energy-efficiency standards. This data was submitted during the 30-day grace period that ran from December 9, 2009, to January 8, 2010. Data for about 600,000 products was submitted. In this case, however, the data was incomplete. In light of the apparent attempt to comply with Department's regulations, the warning letters simply identify various substantive deficiencies in the data submitted, demand their expeditious

19

DOE Offers Support for Innovative Manufacturing Plant That Will Produce  

Broader source: Energy.gov (indexed) [DOE]

Support for Innovative Manufacturing Plant That Will Support for Innovative Manufacturing Plant That Will Produce High Quality Solar Silicon at Low Cost DOE Offers Support for Innovative Manufacturing Plant That Will Produce High Quality Solar Silicon at Low Cost June 16, 2011 - 12:00am Addthis Washington D.C. - U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment for a $275 million loan guarantee to Calisolar Inc. to commercialize its innovative solar silicon manufacturing process. Calisolar's innovative process should produce silicon for use in solar cells at less than half the cost of traditional polysilicon purification processes, which will reduce the overall cost of solar modules and panels. At full production, the manufacturing plant is expected to produce 16,000 metric tons (MT) of solar silicon annually, equivalent to

20

DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

information, use the DOE Phonebook. Latest content created by this user Jan 05, 2015 Conduct of Operations Dec 04, 2014 Certification for DOE O 422.1 Admin Chg 1 Jun 29, 2010...

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

use of nuclear explosives. 2015-01-29T17:37:07Z News Item NEW - DOE O 422.1 Admin Chg 2, Conduct of Operations https:www.directives.doe.govnewsnew-doe-o-422.1-admin-chg-2 The...

22

DOE Research Grant Leads to Gas Turbine Manufacturing Improvements |  

Broader source: Energy.gov (indexed) [DOE]

Research Grant Leads to Gas Turbine Manufacturing Improvements Research Grant Leads to Gas Turbine Manufacturing Improvements DOE Research Grant Leads to Gas Turbine Manufacturing Improvements August 16, 2011 - 1:00pm Addthis Washington, DC - Research sponsored by the U.S. Department of Energy's Office of Fossil Energy (FE) has led to a new licensing agreement that will improve the performance of state-of-the-art gas turbines, resulting in cleaner, more reliable and affordable energy. The collaborative technology license agreement, penned by Mikro Systems Inc. and Siemens Energy Inc., reflects growth in U.S.-based manufacturing know-how and leadership in cutting-edge technology development and rapid implementation. Gas turbines, which are used to produce electricity for industrial or central power generation applications, consist sequentially of compressor,

23

DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen and Fuel Cells Hydrogen and Fuel Cells Technologies Manufacturing Sub-program Nancy L. Garland, Ph.D. U.S Department of Energy NREL H 2 /FC Manufacturing R&D Workshop Washington, D.C. August 11-12, 2011 * Goal: Research, develop and demonstrate technologies and processes that reduce the cost of components and systems for fuel cells, and hydrogen production, delivery, and storage; grow the domestic supplier base. * Challenge: Move hydrogen and fuel cells from laboratory-scale production into high-volume, low-cost manufacturing. 2 Goal of Manufacturing sub-program U.S. DOE 8/10/11 3 Budget EMPHASIS  Develop novel, robust, ultrasonic bonding processes for MEAs to reduce MEA-pressing cycle time  Develop real-time, online measurement tools to reduce/eliminate ex situ

24

DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Phonebook. Latest content created by this user Nov 21, 2014 Nuclear Explosive and Weapon Surety Program (Informational Purposes Only) Aug 05, 2014 Nuclear Explosive and Weapon...

25

DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

information, use the DOE Phonebook. Latest content created by this user Aug 26, 2005 Safeguards and Security Program Planning and Management Jul 26, 2011 Safeguards and Security...

26

DOE Hydrogen Program Manufacturing R&D Pre-Solicitation Meeting...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

DOE Hydrogen Program Manufacturing R&D Pre-Solicitation Meeting DOE Hydrogen Program Manufacturing R&D Pre-Solicitation Meeting This presentation by DOE's Pete Devlin was given at...

27

Solid-State Lighting: DOE Solid-State Lighting Manufacturing Workshop  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Solid-State Lighting DOE Solid-State Lighting Manufacturing Workshop to someone by E-mail Share Solid-State Lighting: DOE Solid-State Lighting Manufacturing Workshop on Facebook Tweet about Solid-State Lighting: DOE Solid-State Lighting Manufacturing Workshop on Twitter Bookmark Solid-State Lighting: DOE Solid-State Lighting Manufacturing Workshop on Google Bookmark Solid-State Lighting: DOE Solid-State Lighting Manufacturing Workshop on Delicious Rank Solid-State Lighting: DOE Solid-State Lighting Manufacturing Workshop on Digg Find More places to share Solid-State Lighting: DOE Solid-State Lighting Manufacturing Workshop on AddThis.com... Conferences & Meetings Past Conferences Presentations Publications Webcasts Videos Tools DOE Solid-State Lighting Manufacturing Workshop This page provides links to the presentations given at the 2009 DOE

28

DOE - Office of Legacy Management -- American Manufacturing Co of Texas -  

Office of Legacy Management (LM)

Manufacturing Co of Texas Manufacturing Co of Texas - TX 08 FUSRAP Considered Sites Site: American Manufacturing Co of Texas - TX 08 ( TX.08 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: North Sylvania Ave. , Fort Worth , Texas TX.08-1 Evaluation Year: Circa 1995 TX.08-1 TX.08-2 Site Operations: Specialized tube elongation and billet piercing tests on Uranium metal for the AEC. TX.08-1 Site Disposition: Eliminated - Based upon the results of a radiological survey of the property - No radionuclide concentrations or exposure levels above DOE Guidelines TX.08-1 TN.08-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium TN.08-1 Radiological Survey(s): Yes TX.08-1 TX.08-2

29

Personnel Security - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

472.2 Chg 1, Personnel Security by Mark Pekrul Functional areas: Personnel Security, Security, Human Capital The order establishes requirements that will enable DOE to operate a...

30

Conduct of Operations Requirements for DOE Facilities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

"To provide requirements and guidelines for Departmental Elements, including the National Nuclear Security Administration (NNSA), to use in developing directives, plans, and/or procedures relating to the conduct of operations at DOE facilities. The implementation of these requirements and guidelines should result in improved quality and uniformity of operations. Change 2, 10-23-2001. Canceled by DOE O 422.1.

1990-07-09T23:59:59.000Z

31

DOE Hydrogen Program Manufacturing R&D Pre-Solicitation Meeting  

Broader source: Energy.gov [DOE]

This presentation by DOE's Pete Devlin was given at the DOE Hydrogen Program Manufacturing R&D Pre-Solicitation Meeting in May 2007.

32

DOE Challenge Home, Washington Program Requirements  

Broader source: Energy.gov (indexed) [DOE]

DOE Challenge Home Washington Program Requirements 9-1-2013 To qualify as a DOE Challenge Home, a home shall meet the minimum requirements specified below, be verified and field-tested in accordance with HERS Standards by an approved verifier, and meet all applicable codes. Builders may meet the requirements of either the Performance Path or the Prescriptive path to qualify a home. 1 Single family detached and attached dwelling units, and dwelling units in multifamily buildings with 3 stories or fewer above-grade 2,3 are eligible for qualification. DOE Challenge Home Prescriptive Path The prescriptive path provides a single set of measures that can be used to construct a DOE Challenge Home labeled home. Modeling is not required, but no tradeoffs are allowed. Follow these steps to use the prescriptive path:

33

DOE Challenge Home, California Program Requirements  

Broader source: Energy.gov (indexed) [DOE]

DOE Challenge Home California Program Requirements These Program Requirements shall only be used in the State of California. To qualify as a DOE Challenge Home, a home shall meet the minimum requirements specified below, be verified and field-tested in accordance with HERS Standards by an approved verifier, and meet all applicable codes. Builders may meet the requirements of either the Performance Path or the Prescriptive path to qualify a home. 1 Single family detached and attached dwelling units, and dwelling units in multifamily buildings with 3 stories or fewer above-grade 2,3 are eligible for qualification. DOE Challenge Home Prescriptive Path The prescriptive path provides a single set of measures that can be used to construct a DOE Challenge Home labeled

34

News & Updates - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cancellation of Directives Document Actions NEW - DOE O 422.1 Admin Chg 2, Conduct of Operations by Diane Johnson The objective of this Order is to define the requirements for...

35

DOE CYBER SECURITY EBK: MINIMUM CORE COMPETENCY TRAINING REQUIREMENTS...  

Office of Environmental Management (EM)

DOE CYBER SECURITY EBK: MINIMUM CORE COMPETENCY TRAINING REQUIREMENTS DOE CYBER SECURITY EBK: MINIMUM CORE COMPETENCY TRAINING REQUIREMENTS DOE CYBER SECURITY EBK: CORE COMPETENCY...

36

Requirements in DOE O 5480.19, Conduct of Operations Requirements for DOE  

Broader source: Energy.gov (indexed) [DOE]

Requirements in DOE O 5480.19, Conduct of Operations Requirements Requirements in DOE O 5480.19, Conduct of Operations Requirements for DOE Facilities Cross-referenced to DOE O 422.1, Conduct of Operations. Requirements in DOE O 5480.19, Conduct of Operations Requirements for DOE Facilities Cross-referenced to DOE O 422.1, Conduct of Operations. This is an open-book evaluation. Complete the questions, and submit your answers (hand-written or electronically) to the Training Center. Someone will check and grade your answers. If you achieve a score of at least 80%, you will receive a completion certificate. Nuclear Facility Safety Basis Fundamentals Self-Study Guide Review Questions More Documents & Publications U.S. Department of Energy Oak Ridge Operations Nuclear Facility Safety Basis Fundamentals, Self-Study Guide

37

DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS...  

Broader source: Energy.gov (indexed) [DOE]

CORE COMPETENCY TRAINING REQUIREMENTS: CA DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS: CA DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS. Key Cyber...

38

Progress of DOE Materials, Manufacturing Process R&D, and ARRA...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Vehicle Technologies Program Annual Merit Review and Peer Evaluation es098johnson2011o.pdf More Documents & Publications Progress of DOE Materials, Manufacturing...

39

POLICY GUIDANCE MEMORANDUM #33 - Requirements for DOE Delegated...  

Broader source: Energy.gov (indexed) [DOE]

3 - Requirements for DOE Delegated Examining Procedures POLICY GUIDANCE MEMORANDUM 33 - Requirements for DOE Delegated Examining Procedures The purpose of this guidance is to...

40

DOE CYBER SECURITY EBK: MINIMUM CORE COMPETENCY TRAINING REQUIREMENTS...  

Broader source: Energy.gov (indexed) [DOE]

DOE CYBER SECURITY EBK: MINIMUM CORE COMPETENCY TRAINING REQUIREMENTS DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS: CA Cybersecurity Program Manager (CSPM...

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Requirements in DOE O 5480.19, Conduct of Operations Requirements...  

Broader source: Energy.gov (indexed) [DOE]

Requirements in DOE O 5480.19, Conduct of Operations Requirements for DOE Facilities Cross-referenced to DOE O 422.1, Conduct of Operations. Requirements in DOE O 5480.19, Conduct...

42

DOE/EIA-0515(85) Energy Information Administration Manufacturing...  

U.S. Energy Information Administration (EIA) Indexed Site

5(85) Energy Information Administration Manufacturing Energy Consumption Survey: Fuel Switching, 1985 This publication is available from the Superintendent of Documents, U.S,...

43

DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

44

DOE - Office of Legacy Management -- Titanium Alloys Manufacturing Co Div  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Titanium Alloys Manufacturing Co Titanium Alloys Manufacturing Co Div of National Lead of Ohio - NY 41 FUSRAP Considered Sites Site: TITANIUM ALLOYS MANUFACTURING CO., DIV. OF NATIONAL LEAD OF OHIO (NY.41) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Titanium Alloy Metals Titanium Alloy Manufacturing Division Titanium Alloy Manufacturing (TAM) Division of National Lead Company The Titanium Pigment Co. NL Industries ICD/Niagara NY.41-1 NY.41-2 NY.41-3 Location: Niagara Falls , New York NY.41-1 Evaluation Year: 1993 NY.41-4 Site Operations: Produced commercial grade zirconium tetrachloride; conducted research and development relating to solid metallic hydride moderators; and experimental work relative to the conversion of thorium scrap to anhydrous tetrachloride. NY.41-5

45

News & Updates - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Workplace NEW - DOE O 452.2E, Nuclear Explosive Safety NEW - DOE O 422.1 Admin Chg 2, Conduct of Operations NEW - DOE P 481.1, DOE's Policy Regarding Laboratories, Plants and...

46

Certification Memos - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chg 1 Certification for DOE P 456.1 Certification for DOE G 440.1-7A Certification for DOE G 441.1-1C Certification for DOE G 414.1-4 Certification for DOE M 441.1-1 and DOE O...

47

DOE and Federal Energy and Manufacturing Workforce Programs and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

OEandFedWF-Training-Location-V4.xlsx More Documents & Publications Energy & Manufacturing Workforce Training Topics List - Version 1.7 (02.11.14) Trade Adjustment Assistance...

48

Justification Memoranda - DOE Directives, Delegations, and Requirement...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to Revise DOE G 414.1-1B, Management and Independent Assessments Guide for Use with 10 CFR, Part 830, Subpart A, and DOE O 414.1C, Quality Assurance; DOE M 450.4-1, Integrated...

49

The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop  

Broader source: Energy.gov [DOE]

More than 250 industry leaders from all corners of the supply chain including chip makers, luminaire manufacturers, material and equipment suppliers, packagers, luminaire testers, and makers of testing equipment gathered in San Jose, CA, April 21-22, 2010, to share insights, ideas, and updates at the second annual Solid-State Lighting (SSL) Manufacturing R&D Workshop, hosted by DOE. This workshop is a key part of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes and to foster a significant manufacturing role in the U.S. This year in San Jose, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

50

The Fifth Annual DOE Solid-State Lighting Manufacturing R&D Workshop  

Broader source: Energy.gov [DOE]

More than 150 industry leaders from across the country, representing every link in the supply chainchip makers, luminaire manufacturers, material and equipment suppliers, packagers, luminaire testers, and makers of testing equipmentgathered in Boston June 56, 2013, to share insights, ideas, and updates at the fifth annual Solid-State Lighting Manufacturing R&D Workshop, hosted by DOE. The workshop is a key component of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes, and to foster a significant manufacturing role in the U.S. This year in Boston, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

51

The Third Annual DOE Solid-State Lighting Manufacturing R&D Workshop  

Broader source: Energy.gov [DOE]

More than 250 lighting industry leaders from across the country, representing every link in the supply chainfrom chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to luminaire testers, to the makers of testing equipmentgathered in Boston April 1213, 2011, to share insights, ideas, and updates at the third annual Solid-State Lighting (SSL) Manufacturing R&D Workshop, hosted by DOE. The workshop is a key component of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes and to foster a significant manufacturing role in the U.S. This year in Boston, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

52

The Fourth Annual DOE Solid-State Lighting Manufacturing R&D Workshop  

Broader source: Energy.gov [DOE]

Two hundred lighting industry leaders from across the country, representing every link in the supply chainfrom chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to luminaire testers, to the makers of testing equipmentgathered in San Jose, CA, June 1314, 2012, to share insights, ideas, and updates at the fourth annual Solid-State Lighting (SSL) Manufacturing R&D Workshop, hosted by DOE. The workshop is a key component of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes, and to foster a significant manufacturing role in the U.S. This year in San Jose, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

53

DOE - Office of Legacy Management -- Manufacturing Laboratories Inc - MA  

Office of Legacy Management (LM)

Manufacturing Laboratories Inc - MA Manufacturing Laboratories Inc - MA 0-04 FUSRAP Considered Sites Site: MANUFACTURING LABORATORIES, INC. (MA.0-04 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 272 Northampton Street , Boston , Massachusetts MA.0-04-1 Evaluation Year: 1987 MA.0-04-3 Site Operations: Developed a process for making projectiles from depleted uranium during the early 1950s. MA.0-04-3 Site Disposition: Eliminated - Potential for contamination considered remote based on limited scope of operations at the site MA.0-04-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium MA.0-04-1 Radiological Survey(s): None Indicated Site Status: Eliminated from further consideration under FUSRAP

54

DOE - Office of Legacy Management -- Penn Salt Manufacturing Co Whitemarsh  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Penn Salt Manufacturing Co Penn Salt Manufacturing Co Whitemarsh Research Laboratories - PA 20 FUSRAP Considered Sites Site: PENN SALT MANUFACTURING CO., WHITEMARSH RESEARCH LABORATORIES (PA.20) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: Penn Salt Company PA.20-1 Location: Philiadelphia , Pennsylvania PA.20-1 Evaluation Year: 1987 PA.20-1 Site Operations: Conducted process studies for recovery of uranium from fluoride scrap. PA.20-1 Site Disposition: Eliminated - AEC licensed operation. Potential for residual radioactive contamination considered remote due to limited quantities and scope of operations. PA.20-2 PA.20-1 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium PA.20-1 Radiological Survey(s): None Indicated

55

Industrial Activities at DOE: Efficiency, Manufacturing, Process, and Materials R&D  

Broader source: Energy.gov [DOE]

Overview of industrial activities at DOE by Joe Cresko, EERE Advanced Manufacturing Office, at the EERE QC Workshop held December 9-10, 2013, at the National Renewable Energy Laboratory in Golden, Colorado.

56

2010 DOE, Li-Ion Battery Cell Manufacturing  

Broader source: Energy.gov [DOE]

2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

57

DOE/EIA-0516(85) Energy Information Administration Manufacturing...  

U.S. Energy Information Administration (EIA) Indexed Site

6(85) Energy Information Administration Manufacturing Energy Consumption Survey: Changes in Energy Efficienc y 1980-198 5 0 6 6 T ' L I A n s n u e r b i r p u T J d J T O J u o i...

58

DOE NEPA Guidance and Requirements - Search Index - Table of Contents |  

Broader source: Energy.gov (indexed) [DOE]

DOE NEPA Guidance and Requirements - Search Index - Table of DOE NEPA Guidance and Requirements - Search Index - Table of Contents DOE NEPA Guidance and Requirements - Search Index - Table of Contents Return to Download Page The DOE NEPA Guidance and Requirements - Search Index includes: NEPA Guidance and Requirements Documents Issued by Published A Brief Guide - DOE-wide Contracts For NEPA Documentation DOE 2003 A Citizen's Guide to the NEPA - Having Your Voice Heard CEQ 2007 A Resource Handbook on DOE Transportation Risk Assessment DOE 2002 Actions During the NEPA Process - Interim Actions DOE 2003 Administrative Record Guidance DOJ 1991 Aligning the NEPA Process with EMS CEQ 2007 Alternative Actions For Analysis in Site-wide NEPA Reviews DOE 1992 Amended Environmental Impact Statement Filing System Guidance EPA 2012 Analysis of Impacts on Prime and Unique Agricultural Lands and NEPA

59

Progress of DOE Materials, Manufacturing Process R&D, and ARRA Battery Manufacturing Grants  

Broader source: Energy.gov [DOE]

2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

60

Progress of DOE Materials, Manufacturing Process R&D, and ARRA Battery Manufacturing Grants  

Broader source: Energy.gov [DOE]

2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

DOE Distributes Energy-Saving Tools to Help Manufacturers Save Energy |  

Broader source: Energy.gov (indexed) [DOE]

DOE Distributes Energy-Saving Tools to Help Manufacturers Save DOE Distributes Energy-Saving Tools to Help Manufacturers Save Energy DOE Distributes Energy-Saving Tools to Help Manufacturers Save Energy July 26, 2006 - 4:41pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) has distributed Save Energy Now CD-ROMs containing energy-saving information and software to 3,500 large industrial plant managers across the nation as part of a DOE initiative to help cut excessive energy use at industrial facilities across the nation. The CDs bring together - in a single product - a compendium of tip sheets, case studies, technical manuals and software tools to help plants assess energy-saving opportunities. "President Bush has called on all Americans to be more energy efficient, and private industry, along with the federal government, are taking

62

NERSC/DOE HEP Requirements Workshop Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Workshop GoalsOverview November 12, 2009 | Author(s): Yukiko Sekine | Workshop Logistics November 12, 2009 | Author(s): Harvey Wasserman | DOE HEP Overview November 12, 2009...

63

Enforcement of DOE Classified Information Security Requirements Under Title  

Broader source: Energy.gov (indexed) [DOE]

of DOE Classified Information Security Requirements of DOE Classified Information Security Requirements Under Title 10, Code of Federal Regulations, Part 824 Enforcement of DOE Classified Information Security Requirements Under Title 10, Code of Federal Regulations, Part 824 In publishing 10 CFR Part 824, DOE has determined that civil penalties under Part 824 will only be assessed for violations of requirements for the protection of classified information (Restricted Data, Formerly Restricted Data and National Security Information). The rule does not include civil penalties relating to failure to protect sensitive but unclassified information. IMPLEMENTATION GUIDANCE More Documents & Publications Safety and Security Enforcement Process Overview Preliminary Notice, Battelle Energy Alliance, LLC, SEA-2011-01

64

News - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nuclear Explosive and Weapon Surety Program - Read More... NEW - DOE O 422.1 Admin Chg 2, Conduct of Operations - by Diane Johnson - last modified Jan 05, 2015 03:39 PM The...

65

DOE NEPA Guidance and Requirements - Search Index | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE NEPA Guidance and Requirements - Search Index DOE NEPA Guidance and Requirements - Search Index DOE NEPA Guidance and Requirements - Search Index The DOE NEPA Guidance and Requirements - Search Index is a one-stop solution providing you with DOE's Guidance and Requirements documents combined into one file for easy download and use. The compressed (.zip) file contains all of these documents in their optimized and machine-readable format. The file also contains a "search index" that can be used to search for keywords and phrases in all the documents from one search form, without the need to install a separate program. Please direct any questions, comments, or feedback to: John.Jediny@hq.doe.gov Review the documents included in the Search Index as a List or Table NEPA Requirements and Guidance - Search Index.zip

66

DOE NEPA Guidance and Requirements - Search Index | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE NEPA Guidance and Requirements - Search Index DOE NEPA Guidance and Requirements - Search Index DOE NEPA Guidance and Requirements - Search Index The DOE NEPA Guidance and Requirements - Search Index is a one-stop solution providing you with DOE's Guidance and Requirements documents combined into one file for easy download and use. The compressed (.zip) file contains all of these documents in their optimized and machine-readable format. The file also contains a "search index" that can be used to search for keywords and phrases in all the documents from one search form, without the need to install a separate program. Please direct any questions, comments, or feedback to: John.Jediny@hq.doe.gov Review the documents included in the Search Index as a List or Table NEPA Requirements and Guidance - Search Index.zip

67

DOE Distributes Energy-Saving Tools to Help Manufacturers Save Energy |  

Broader source: Energy.gov (indexed) [DOE]

Distributes Energy-Saving Tools to Help Manufacturers Save Distributes Energy-Saving Tools to Help Manufacturers Save Energy DOE Distributes Energy-Saving Tools to Help Manufacturers Save Energy July 26, 2006 - 4:41pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) has distributed Save Energy Now CD-ROMs containing energy-saving information and software to 3,500 large industrial plant managers across the nation as part of a DOE initiative to help cut excessive energy use at industrial facilities across the nation. The CDs bring together - in a single product - a compendium of tip sheets, case studies, technical manuals and software tools to help plants assess energy-saving opportunities. "President Bush has called on all Americans to be more energy efficient, and private industry, along with the federal government, are taking

68

Delegation Procedures - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy's primary means of establishing policies, requirements, responsibilities, and procedures for Departmental elements and contractors. Directives Program Management Camille...

69

DOE NEPA Guidance and Requirements - Search Index - Table of Contents |  

Broader source: Energy.gov (indexed) [DOE]

Table of Table of Contents DOE NEPA Guidance and Requirements - Search Index - Table of Contents Return to Download Page The DOE NEPA Guidance and Requirements - Search Index includes: NEPA Guidance and Requirements Documents Issued by Published A Brief Guide - DOE-wide Contracts For NEPA Documentation DOE 2003 A Citizen's Guide to the NEPA - Having Your Voice Heard CEQ 2007 A Resource Handbook on DOE Transportation Risk Assessment DOE 2002 Actions During the NEPA Process - Interim Actions DOE 2003 Administrative Record Guidance DOJ 1991 Aligning the NEPA Process with EMS CEQ 2007 Alternative Actions For Analysis in Site-wide NEPA Reviews DOE 1992 Amended Environmental Impact Statement Filing System Guidance EPA 2012 Analysis of Impacts on Prime and Unique Agricultural Lands and NEPA

70

DOE RFI 2010-11129 NBP RFI: Communications Requirements Titled...  

Broader source: Energy.gov (indexed) [DOE]

the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy" DOE RFI 2010-11129 NBP RFI: Communications...

71

What are my DOE reporting requirements? | Scientific and Technical  

Office of Scientific and Technical Information (OSTI)

What are my DOE reporting requirements? What are my DOE reporting requirements? Print page Print page Email page Email page DOE reporting requirements for DOE financial assistance recipients are specified as scientific/technical reporting deliverables on the Federal Assistance Reporting Checklist (DOE F 4600.2). Other awardees such as Non-major Site/facility Management Contractors technical reporting requirements are identified in Section J, List of Attachments, of the contract as part of the Performance Work Statement/Statement of Work or as a separate attachment. Each required Scientific/Technical Report deliverable is to be submitted to DOE in electronic format as indicated in the award instrument/contractual agreement. Electronic documents should be submitted in one integrated file that contains all text, tables, diagrams, photographs, schematic, graphs,

72

Delegation Procedures - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Accessibility Text size: (Requires JavaScript) Large Normal Small This site uses the Open Source Content Management System Plone and has been designed to be completely accessible...

73

NERSC/DOE ASCR Requirements Workshop Logistics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Logistics Workshop Logistics Large Scale Computing and Storage Requirements for Advanced Scientific Computing Research January 5-6, 2011 Location The workshop will be held at...

74

NERSC/DOE NP Requirements Workshop Logistics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hotel Hotel Arrangements Large Scale Computing and Storage Requirements for Nuclear Physics May 26-27, 2011 Location The workshop will be held at Hyatt Regency Bethesda One...

75

Contact Form - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contact Form by Diane Johnson Directives are the Department of Energy's Primary means of establishing policies, requirements, responsibilities, and procedures for Departmental...

76

Personnel Security - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Admin Chg 1, Personnel Security by Mark Pekrul Functional areas: Administrative Change, Personnel Security, Safety and Security The order establishes requirements that will...

77

DOE NEPA Guidance and Requirements - Search Index - List of Contents |  

Broader source: Energy.gov (indexed) [DOE]

List of List of Contents DOE NEPA Guidance and Requirements - Search Index - List of Contents Return to Download Page The NEPA Guidance and Requirements - Search Index includes: A Brief Guide - DOE-wide Contracts For NEPA Documentation [DOE][2003] A Citizen's Guide to the NEPA - Having Your Voice Heard [CEQ][2007] A Resource Handbook on DOE Transportation Risk Assessment [DOE][2002] Actions During the NEPA Process - Interim Actions [DOE][2003] Administrative Record Guidance [DOJ][1991] Aligning the NEPA Process with EMS [CEQ][2007] Alternative Actions For Analysis in Site-wide NEPA Reviews [DOE][1992] Amended Environmental Impact Statement Filing System Guidance [EPA][2012] Analysis of Impacts on Prime and Unique Agricultural Lands and NEPA [CEQ][1980] Analysis of Impacts to Workers in NEPA Documentation [DOE][1988]

78

NERSC/DOE BER Requirements Workshop Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Christopher Kerr | Global Cloud Resolving Model May 7, 2009 | Author(s): David Randall | IO Requirements for a Global Cloud Resolving Model May 7, 2009 | Author(s): Bruce...

79

Manufacturing  

Office of Environmental Management (EM)

Flow of Materials through Industry Sustainable 1 Manufacturing 2 Technology Assessment 3 Contents 4 1. Introduction to the TechnologySystem ......

80

Low Energy Ion Implantationin Semiconductor Manufacturing | U.S. DOE Office  

Office of Science (SC) Website

Low Energy Ion Implantation in Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Spinoff Applications Spinoff Archives SBIR/STTR Applications of Nuclear Science and Technology Funding Opportunities Nuclear Science Advisory Committee (NSAC) News & Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: sc.np@science.doe.gov More Information » Spinoff Archives Low Energy Ion Implantation in Semiconductor Manufacturing Print Text Size: A A A RSS Feeds FeedbackShare Page Application/Instrumentation: Low Energy Ion Implantation in Semiconductor Manufacturing Developed at: BNL, New York; High Current Electronic Institute, Tomsk, Russia; Institute for Theoretical and Experimental Physics (ITEP), Moscow, Russia

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Carbon Nanotubes and Nano-Structure Manufacturing at TJNAF | U.S. DOE  

Office of Science (SC) Website

Carbon Nanotubes and Nano-Structure Carbon Nanotubes and Nano-Structure Manufacturing at TJNAF Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Spinoff Applications Spinoff Archives SBIR/STTR Applications of Nuclear Science and Technology Funding Opportunities Nuclear Science Advisory Committee (NSAC) News & Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: sc.np@science.doe.gov More Information » Spinoff Archives Carbon Nanotubes and Nano-Structure Manufacturing at TJNAF Print Text Size: A A A RSS Feeds FeedbackShare Page Application/instrumentation: Carbon Nanotube & Nano-structure Manufacturing Developed at: Thomas Jefferson National Accelerator Laboratory

82

DOE RFI 2010-11129 NBP RFI: Communications Requirements Titled  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

RFI 2010-11129 NBP RFI: Communications Requirements Titled RFI 2010-11129 NBP RFI: Communications Requirements Titled "Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy" DOE RFI 2010-11129 NBP RFI: Communications Requirements Titled "Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy" Grid Net, Inc. Comments on Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy DOE RFI 2010-11129 NBP RFI: Communications Requirements Titled "Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy"

83

DOE Responses to DOE Challenge Home (formerly Builders Challenge) National Program Requirements Public Comments  

Broader source: Energy.gov (indexed) [DOE]

- Responses to Draft Specification Comments 1 - Responses to Draft Specification Comments 1 Updated 4/9/2012 DOE Responses to DOE Challenge Home (formerly Builders Challenge) National Program Requirements Public Comments DOE received comments on the draft DOE Challenge Home specifications and requirements from December 15, 2011 through January 31, 2012. This document summarizes the comments received, DOE's responses, and the resulting policy change, if any. All comments were reviewed. Similar comments were grouped together in the responses. Editorial comments and general observations were considered, but are not listed in the responses below unless they involved a significant clarification to the DOE Challenge Home provisions. DOE is not responsible for any typographical errors or omissions.

84

Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Manufacturing DUF6 Health Risks line line Accidents Storage Conversion Manufacturing Disposal Transportation Manufacturing of Products Containing Depleted Uranium Discussion of risks and possible impacts associated with fabrication of representative products containing depleted uranium. Beneficial Uses Risk Evaluation The Department has initiated the Depleted Uranium Uses Research and Development Program to explore the potential beneficial uses of the depleted uranium (DU), fluorine, and empty carbon steel DUF6 storage cylinders for effective use of resources and to achieve cost savings to the government. A number of tasks have been initiated related to uses of DU as a shielding material, catalyst, and as a semi-conductor material in electronic devices. An evaluation of the risks associated with the release

85

Minimum Exergy Requirements for the Manufacturing of Carbon Nanotubes  

E-Print Network [OSTI]

The purpose of this paper is to address both the high values, and the large variation in reported values for the energy requirements for the production of carbon nanotubes. The paper includes an estimate of the standard ...

Gutowski, Timothy G.

86

Implementation of DOE NPH Requirements at the Thomas Jefferson National Accelerator Facility (TJNAF), a Non-Nuclear DOE Lab  

Broader source: Energy.gov [DOE]

Implementation of DOE NPH Requirements at the Thomas Jefferson National Accelerator Facility (TJNAF), a Non-Nuclear DOE Lab David Luke, DOE, Thomas Jefferson Site Office Stephen McDuffie, DOE, Office of the Chief of Nuclear Safety

87

DOE Challenge Home National Program Requirements (Rev. 03)  

Broader source: Energy.gov (indexed) [DOE]

National Program Requirements (Rev. 03) National Program Requirements (Rev. 03) April 17, 2013 Effective for Homes Revised April 17, 2013 Page 1 of 8 Permitted Starting 6/17/2013 To qualify as a DOE Challenge Home, a home shall meet the minimum requirements specified below, be verified and field-tested in accordance with HERS Standards by an approved verifier, and meet all applicable codes. Builders may meet the requirements of either the Performance Path or the Prescriptive path to qualify a home. 1 Single family detached and attached dwelling units, and dwelling units in multifamily buildings with 3 stories or fewer above-grade 2,3 are eligible for qualification. DOE Challenge Home Prescriptive Path The prescriptive path provides a single set of measures that can be used to construct a DOE Challenge Home labeled

88

DOE-STD-1077-94; DOE Standard Training Accreditation Program Standard: Requirements and Guidelines  

Broader source: Energy.gov (indexed) [DOE]

7-94 7-94 August 1994 Supercedes DOE-STD-0101T, TAP-1, and DOE-STD-0103T, TAP-3 DOE STANDARD TRAINING ACCREDITATION PROGRAM STANDARD: REQUIREMENTS AND GUIDELINES U.S. Department of Energy Washington, D.C. 20585 FSC 6910 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94018723 DOE-STD-1077-94 FOREWORD The Training Accreditation Program was established by the Department of Energy

89

DOE Order Self Study Modules - DOE O 426.2 Personnel Selection, Training, Qualification, and Certification Requirements for DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

6.2 6.2 PERSONNEL SELECTION, TRAINING, QUALIFICATION, AND CERTIFICATION REQUIREMENTS FOR DOE NUCLEAR FACILITIES DOE O 426.2 Familiar Level June 2011 1 DOE O 426.2 PERSONNEL SELECTION, TRAINING, QUALIFICATION, AND CERTIFICATION REQUIREMENTS FOR DOE NUCLEAR FACILITIES FAMILIAR LEVEL ___________________________________________________________________________ OBJECTIVES Given the familiar level of this module and the resources, you will be able answer the following questions: 1. What is the purpose of DOE O 426.2, Personnel Selection, Training, Qualification, and Certification Requirements for DOE Nuclear Facilities? 2. What are the DOE field elements requirements associated with DOE O 426.2? 3. What are the general contractor requirements specified in the contractor requirements

90

Personnel Selection, Qualification, and Training Requirements for DOE Nuclear Facilities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish selection, qualification, and training requirements for management and operating (M&O) contractor personnel involved in the operation, maintenance, and technical support of Department of Energy and National Nuclear Security Administration Category A and B reactors and non-reactor nuclear facilities. Canceled by DOE O 426.2

2001-07-12T23:59:59.000Z

91

Development of Advanced Manufacturing Technologies for Renewable Energy Applications, excerpt from 2007 DOE Hydrogen Program Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

65 65 FY 2007 Annual Progress Report DOE Hydrogen Program Objectives This project will address selected key manufacturability issues needing solution in two hydrogen technology areas: storage and the production of components. NCMS will evaluate, identify, and develop manufacturing technologies vital to affordable hydrogen-powered systems. NCMS will leverage manufacturing technologies from other industrial sectors and work with its extensive industrial membership to do feasibility projects on those technologies identified as key to reducing production cost by rendering a system component or subcomponent of the targeted hydrogen-powered systems producible in volume. Technical Barriers This project addresses the following technical barriers from the Manufacturing R&D section of the

92

NERSC/DOE BES Requirements Workshop Worksheet - Peter Cummings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Peter Cummings Peter Cummings Peter Cummings BES Requirements Worksheet 1.1. Project Information - Molecular-Based Simulation of Complex and Nanostructured Fluids Document Prepared By Peter Cummings Project Title Molecular-Based Simulation of Complex and Nanostructured Fluids Principal Investigator Peter Cummings Participating Organizations Vanderbilt University Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: DOE/EERE 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. We perform primarily molecular dynamics simulations of nanostructured

93

Minimum Analytical Chemistry Requirements for Pit Manufacturing at Los Alamos National Laboratory  

SciTech Connect (OSTI)

Analytical chemistry is one of several capabilities necessary for executing the Stockpile Stewardship and Management Program at Los Alamos National Laboratory (LANL). Analytical chemistry capabilities reside in the Chemistry Metallurgy Research (CMR) Facility and Plutonium Facility (TA-55). These analytical capabilities support plutonium recovery operations, plutonium metallurgy, and waste management. Analytical chemistry capabilities at both nuclear facilities are currently being configured to support pit manufacturing. This document summarizes the minimum analytical chemistry capabilities required to sustain pit manufacturing at LANL. By the year 2004, approximately $16 million will be required to procure analytical instrumentation to support pit manufacturing. In addition, $8.5 million will be required to procure glovebox enclosures. An estimated 50% increase in costs has been included for installation of analytical instruments and glovebox enclosures. However, no general and administrative (G and A) taxes have been included. If an additional 42.5/0 G and A tax were to be incurred, approximately $35 million would be required over the next five years to prepare analytical chemistry to support a 50-pit-per-year manufacturing capability by the year 2004.

Moy, Ming M.; Leasure, Craig S.

1998-08-01T23:59:59.000Z

94

DOE-STD-6002-96; DOE Standard Safety of Magnetic Fusion Facilities: Requirements  

Broader source: Energy.gov (indexed) [DOE]

6002-96 6002-96 May 1996 DOE STANDARD SAFETY OF MAGNETIC FUSION FACILITIES: REQUIREMENTS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009495 DOE-STD-6002-96 iii TABLE OF CONTENTS Page FOREWORD....................................................................................................................... v

95

NERSC/DOE FES Requirements Workshop Worksheet - Stephane Ethier  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stephane Ethier Stephane Ethier Stephane Ethier FES Requirements Worksheet 1.1. Project Information - Global Gyrokinetic PIC Simulations of Plasma Microturbulence Document Prepared By Stephane Ethier Project Title Global Gyrokinetic PIC Simulations of Plasma Microturbulence Principal Investigator Weixing Wang Participating Organizations PPPL Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. We use global, gyrokinetic particle-in-cell simulations to study all aspects of plasma micro-turbulence in the core of tokamak fusion devices.

96

NERSC/DOE FES Requirements Workshop Worksheet - Frank Tsung  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Frank Tsung Frank Tsung Frank Tsung FES Requirements Worksheet 1.1. Project Information - Large Scale Particle-in-Cell Simulations of Laser Plasma Interactions Relevant to Inertial Fusion En Document Prepared By Frank Tsung Project Title Large Scale Particle-in-Cell Simulations of Laser Plasma Interactions Relevant to Inertial Fusion En Principal Investigator Frank Tsung Participating Organizations UCLA Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. The goal of this project is to use state-of-art particle-in-cell tools

97

NERSC/DOE FES Requirements Workshop Worksheet - Xianzhu Tang  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Xianzhu Tang Xianzhu Tang Xianzhu Tang FES Requirements Worksheet 1.1. Project Information - Plasma materials interaction Document Prepared By Xianzhu Tang Project Title Plasma materials interaction Principal Investigator Xianzhu Tang Participating Organizations Los Alamos National Laboratory Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. This project combines kinetic modeling of boundary plasma and atomistic modeling of wall material response to plasma irradiation to understand the

98

NERSC/DOE BES Requirements Workshop Worksheet - Mark Jarrell  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mark Jarrell Mark Jarrell Mark Jarrell BES Requirements Worksheet 1.1. Project Information - SciDAC: Next Generation Multi-Scale Quantum Simulation Software for Strongly Correlated Materials Document Prepared By Mark Jarrell Project Title SciDAC: Next Generation Multi-Scale Quantum Simulation Software for Strongly Correlated Materials Principal Investigator Mark Jarrell Participating Organizations Louisiana State University Ohio SuperComputer Center UC Davis ORNL Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5

99

NERSC/DOE FES Requirements Workshop Worksheet - Alex Friedman  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Alex Friedman Alex Friedman Alex Friedman FES Requirements Worksheet 1.1. Project Information - Simulation of intense beams for heavy-ion-fusion science (HEDLP / Inertial Fusion Energy) Document Prepared By Alex Friedman Project Title Simulation of intense beams for heavy-ion-fusion science (HEDLP / Inertial Fusion Energy) Principal Investigator Alex Friedman Participating Organizations LBNL, LLNL, PPPL, Univ. of Maryland Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. The US Heavy Ion Fusion Science Virtual National Laboratory (HIFS-VNL), a

100

NERSC/DOE BES Requirements Workshop Worksheet - Jeffrey B. Neaton  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jeffrey B. Neaton Jeffrey B. Neaton Jeffrey B. Neaton BES Requirements Worksheet 1.1. Project Information - Charge Transport and Excited States at Interfaces in Nanostructured Materials Document Prepared By Jeffrey B. Neaton Project Title Charge Transport and Excited States at Interfaces in Nanostructured Materials Principal Investigator Jeffrey B. Neaton Participating Organizations Lawrence Berkeley National Laboratory Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. Over the next 3-5 years, we seek to develop and apply first-principles

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

NERSC/DOE FES Requirements Workshop Worksheet - Zhihong Lin  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Zhihong Lin Zhihong Lin Zhihong Lin FES Requirements Worksheet 1.1. Project Information - SciDAC GSEP Center and GPS-TTBP Center Document Prepared By Zhihong Lin Project Title SciDAC GSEP Center and GPS-TTBP Center Principal Investigator Zhihong Lin Participating Organizations University of California, Irvine Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. The SciDAC GSEP project will further extend the first-principles global gyrokinetic simulations to study new physics in the energetic particle

102

NERSC/DOE FES Requirements Workshop Worksheet - CS Chang  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CS Chang CS Chang CS Chang FES Requirements Worksheet 1.1. Project Information - Center for Plasma Edge Simulation Document Prepared By CS Chang Project Title Center for Plasma Edge Simulation Principal Investigator CS Chang Participating Organizations New York University, ORNL, PPPL, LBNL, MIT, Columbia U., Rutgers U. Lehigh U., Georgia Tech, Auburn U., U. Colorado, U. California at Irvine, Caltech, Hinton Associates Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. Develop the XGC large scale edge kinetic codes further for higher fidelity

103

Proposal for a Guide for Quality Management Systems for PV Manufacturing: Supplemental Requirements to ISO 9001-2008 (Revised)  

SciTech Connect (OSTI)

This technical specification provides a guideline for photovoltaic module manufacturers to produce modules that, once the design has proven to meet the quality and reliability requirements, replicate such design in an industrial scale without compromising its consistency with the requirements.

Norum, P.; Sinicco, I.; Eguchi, Y.; Lokanath, S.; Zhou, W.; Brueggemann, G.; Mikonowicz, A.; Yamamichi, M.; Kurtz, S.

2013-09-01T23:59:59.000Z

104

IDENTIFICATION OF DOE'S POST-CLOSURE MONITORING NEEDS AND REQUIREMENTS  

SciTech Connect (OSTI)

The 2006 plan sets an ambitious agenda for the U.S. Department of Energy (DOE), Office of Environmental Management (EM) and the remediation of sites contaminated by decades of nuclear weapons production activities. The plan's primary objective is to reduce overall clean up costs by first eliminating the environmental problems that are most expensive to control and safely maintain. In the context of the 2006 Plan, closure refers to the completion of area or facility specific cleanup projects. The cleanup levels are determined by the planned future use of the site or facility. Use restrictions are still undecided for most sites but are highly probable to exclude residential or agricultural activities. Most of the land will be remediated to ''industrial use'' levels with access restrictions and some areas will be closed-off through containment. Portions of the site will be reserved for waste disposal, either as a waste repository or the in-situ immobilization of contaminated soil and groundwater, and land use will be restricted to waste disposal only. The land used for waste disposal will require monitoring and maintenance activities after closure. Most of the land used for industrial use may also require such postclosure activities. The required postclosure monitoring and maintenance activities will be imposed by regulators and stakeholders. Regulators will not approve closure plans without clearly defined monitoring methods using approved technologies. Therefore, among all other more costly and labor-intensive closure-related activities, inadequate planning for monitoring and lack of appropriate monitoring technologies can prevent closure. The purpose of this project is to determine, document, and track the current and evolving postclosure monitoring requirements at DOE-EM sites. This information will aid CMST-CP in guiding its postclosure technology development and deployment efforts.

M.A. Ebadian, Ph.D.

1999-01-01T23:59:59.000Z

105

2011 NREL/DOE Hydrogen and Fuel Cell Manufacturing R&D Workshop...  

Energy Savers [EERE]

2011 NRELDOE Hydrogen and Fuel Cell Manufacturing R&D Workshop Report 2011 NRELDOE Hydrogen and Fuel Cell Manufacturing R&D Workshop Report Proceedings from the August 11-12,...

106

DOE's AMO Releases Workshop "Save the Date" and New RFI on Composite Manufacturing  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Advanced Manufacturing Office released a Request for Information on Fiber Reinforced Polymer Composite Manufacturing and plans to host a related workshop on January 13, 2014 in the Washington, D.C. area.

107

Comparison of selected DOE and non-DOE requirements, standards, and practices for Low-Level Radioactive Waste Disposal  

SciTech Connect (OSTI)

This document results from the Secretary of Energy`s response to Defense Nuclear Facilities Safety Board Recommendation 94--2. The Secretary stated that the US Department of Energy (DOE) would ``address such issues as...the need for additional requirements, standards, and guidance on low-level radioactive waste management. `` The authors gathered information and compared DOE requirements and standards for the safety aspects Of low-level disposal with similar requirements and standards of non-DOE entities.

Cole, L. [Cole and Associates (United States); Kudera, D.; Newberry, W. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

1995-12-01T23:59:59.000Z

108

Microsoft Word - DOE RFI - NBP RFI Communications Requirements.docx  

Broader source: Energy.gov (indexed) [DOE]

0 0 Donahue Ferry Road P.O. Box 5000 Pineville, LA 71361-5000 www.cleco.com Tel. 318-484-7400 July 12, 2010 U. S. Department of Energy Office of the General Counsel 1000 Independence Ave, SW, Room 6A245 Washington, DC 20585 Subject: NBP RFI: Communications Requirements Introduction Cleco Corporation greatly appreciates the opportunity to provide information to the Department of Energy (DOE) on the communications needs of utilities. Cleco is an energy services company based in central Louisiana, serving approximately 276,000 residential, commercial and industrial customers since 1934. Cleco manages over 3,000 megawatts of electric capacity through its regulated Cleco Power LLC and unregulated Cleco Midstream Resources LLC businesses, utilizing a diverse fuel mix of lignite, coal, petcoke and natural gas. With 1,300 employees, Cleco manages and operates 70 transmission

109

POLICY GUIDANCE MEMORANDUM #33- Requirements for DOE Delegated Examining Procedures  

Broader source: Energy.gov [DOE]

The purpose of this guidance is to establish the Department of Energys (DOEs) Delegated Examining policy and procedures in order to ensure an effective competitive examining program that supports...

110

New Justification Memos - DOE Directives, Delegations, and Requirement...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Justification Memos by Diane Johnson DOE N 200.1 - Notice of Intent to Develop an Information Sharing and Safeguarding Program Notice DOE G 580.1-1 - Notice of Intent to Revise...

111

DOE - Office of Legacy Management -- W E Pratt Manufacturing Co - IL 12  

Office of Legacy Management (LM)

E Pratt Manufacturing Co - IL 12 E Pratt Manufacturing Co - IL 12 FUSRAP Considered Sites Site: W.E. PRATT MANUFACTURING CO. (IL.12) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: William E. Pratt Manufacturing Co. Klassing Handbrake Company IL.12-1 IL.12-2 Location: 18 Henderson Street , Joliet , Illinois IL.12-3 Evaluation Year: 1990 IL.12-4 IL.12-5 Site Operations: Performed metal fabrication tasks (machining and grinding). IL.12-1 IL.12-4 Site Disposition: Eliminated - Radiation levels below criteria IL.12-3 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium Metal IL.12-1 IL.12-3 Radiological Survey(s): Yes IL.12-3 Site Status: Eliminated from consideration under FUSRAP Also see Documents Related to W.E. PRATT MANUFACTURING CO.

112

Notice of Intent to Develop DOE O 470.5, Integrating Existing Technical Security Program Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This memorandum provides justification for the development of one integrated and consolidated set of requirements for the Department of Energy (DOE) Technical Security Program (TSP). This Order will combine the existing necessary requirements from DOE Manual (M) 205.1-3, Telecommunications Security Manual, dated 4-17-2006 and DOE M 470.4-4A chg.1, Information Security Manual, dated 10-12-2010; Section D -Technical Surveillance Countermeasures, into a single DOE Order defining the DOE TSP.

2013-08-21T23:59:59.000Z

113

Ex Parte Communication Following Meeting Between DOE and the National Marine Manufacturers Association  

Broader source: Energy.gov [DOE]

At 2 p.m. ET on Wednesday, May 7 2014 the National Marine Manufacturers Association (NMMA) along with representatives from three of its member organizations met with Jeremy Dommu of the Department...

114

The Sixth Annual DOE Solid-State Lighting Manufacturing R&D Workshop  

Broader source: Energy.gov [DOE]

About 140 industry leaders from across the country, representing every link in the supply chainfrom chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to...

115

DOE Announces Selections for SSL Manufacturing R&D (Round 3) Funding Opportunity  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy has announced the competitive selection of three projects for solid-state lighting (SSL), in response to the SSL Manufacturing R&D funding opportunity announcement...

116

DOE Announces Selections for SSL Manufacturing R&D (Round 4) Funding Opportunity  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy has announced the competitive selection of five projects for solid-state lighting (SSL), in response to the SSL Manufacturing R&D funding opportunity announcement ...

117

2011 NREL/DOE Hydrogen and Fuel Cell Manufacturing R&D Workshop Report  

Broader source: Energy.gov [DOE]

Proceedings from the August 11-12, 2011, Hydrogen and Fuel Cell Manufacturing R&D Workshop, hosted by the National Renewable Energy Laboratory and the U.S. Department of Energy's Fuel Cell Technologies Program.

118

DOE Seeking Proposals to Advance Distributed Wind Turbine Technology and Manufacturing  

Broader source: Energy.gov [DOE]

On December 29, the U.S. Department of Energys National Renewable Energy Laboratory released a third round of Requests for Proposals under DOEs Distributed Wind Competitiveness Improvement Project.

119

Applying DOE O 414.1C and NQA-1 Requirements to ISM Software...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance...

120

DOE - Office of Legacy Management -- R Krasberg and Sons Manufacturing Co -  

Office of Legacy Management (LM)

Krasberg and Sons Manufacturing Krasberg and Sons Manufacturing Co - IL 27 FUSRAP Considered Sites Site: R. KRASBERG AND SONS MANUFACTURING CO. (IL.27) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Trade Finishing Services, Incorporated IL.27-1 Location: 2501 West Homer Street , Chicago , Illinois IL.27-2 Evaluation Year: 1990 IL.27-3 Site Operations: Provided personnel, facilities and equipment to produce machined parts for special equipment from materials furnished by the University. IL.27-4 Site Disposition: Eliminated - Radiation levels below criteria IL.27-2 Radioactive Materials Handled: None Indicated Primary Radioactive Materials Handled: None Indicated Radiological Survey(s): Yes IL.27-2 Site Status: Eliminated from consideration under FUSRAP

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

CIRP International Conference on Life Cycle Engineering, Leuven, May 31 Electrical Energy Requirements for Manufacturing Processes  

E-Print Network [OSTI]

into a single plot. The analysis is cast in an exergy framework. The results show: 1) the specific energy. Keywords Energy, Exergy, Manufacturing Processes 1 INTRODUCTION Manufacturing processes include a wide Inputs and Outputs for Manufacturing Processes. 2 EXERGY FRAMEWORK In attempting to account for the many

Gutowski, Timothy

122

DOE Zero Energy Ready Home National Program Requirements (Rev. 04)  

Broader source: Energy.gov [DOE]

U.S. Department of Energy Zero Energy Ready Home National Program Requirements (Rev. 04), April 21, 2014.

123

DOE Announces Effort to Advance U.S. Wind Power Manufacturing...  

Energy Savers [EERE]

Effort to Define and Develop Technologies and Siting Strategies Necessary to Achieve 20% Wind Energy by 2030 HOUSTON, TEXAS -The U.S. Department of Energy (DOE) Assistant...

124

Enforcement handbook: Enforcement of DOE nuclear safety requirements  

SciTech Connect (OSTI)

This Handbook provides detailed guidance and procedures to implement the General Statement of DOE Enforcement Policy (Enforcement Policy or Policy). A copy of this Enforcement Policy is included for ready reference in Appendix D. The guidance provided in this Handbook is qualified, however, by the admonishment to exercise discretion in determining the proper disposition of each potential enforcement action. As discussed in subsequent chapters, the Enforcement and Investigation Staff will apply a number of factors in assessing each potential enforcement situation. Enforcement sanctions are imposed in accordance with the Enforcement Policy for the purpose of promoting public and worker health and safety in the performance of activities at DOE facilities by DOE contractors (and their subcontractors and suppliers) who are indemnified under the Price-Anderson Amendments Act. These indemnified contractors, and their suppliers and subcontractors, will be referred to in this Handbook collectively as DOE contractors. It should be remembered that the purpose of the Department`s enforcement policy is to improve nuclear safety for the workers and the public, and this goal should be the prime consideration in exercising enforcement discretion.

NONE

1995-06-01T23:59:59.000Z

125

DOE's General Counsel Announces New Policy Requiring Online Posting of NEPA  

Broader source: Energy.gov (indexed) [DOE]

DOE's General Counsel Announces New Policy Requiring Online Posting DOE's General Counsel Announces New Policy Requiring Online Posting of NEPA Categorical Exclusion Determinations to Further Transparency DOE's General Counsel Announces New Policy Requiring Online Posting of NEPA Categorical Exclusion Determinations to Further Transparency October 15, 2009 - 10:09am Addthis Washington, DC - Consistent with the President's commitment to "disclose information rapidly in forms that the public can readily find and use," DOE announced today a new policy requiring all DOE program and field offices to document certain categorical exclusion determinations and post them online. Categorical exclusions are classes of actions that DOE has determined by regulation do not have a significant effect on the environment, and, therefore, normally do not require detailed environmental

126

Why did DOE issue a DEC  

Broader source: Energy.gov (indexed) [DOE]

did DOE issue a DEC? did DOE issue a DEC? DOE issued the DEC to more effectively promote U.S. manufacturing of new technologies developed under certain DOE funding agreements (e.g. cooperative agreements), a key objective of the Bayh-Dole Act. What does the DEC do? It allows DOE to require all applicants, regardless of type, to submit U.S. manufacturing plans, use U.S. manufacturing plans to evaluate and select applications, and ensure compliance of U.S. manufacturing plans. What is a U.S. manufacturing plan? A U.S. manufacturing plan is an applicant's measurable commitment to support U.S. manufacturing of the technologies related to their DOE funding agreement. The range of commitment may include, for example, manufacturing certain products in the U.S., investing in U.S. facilities or a licensing strategy

127

NERSC/DOE BES Requirements Workshop Worksheet - Normand Modine  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Modine BES Requirements Worksheet 1.1. Project Information - Center for Integrated Nanotechnology (CINT) - Theory and Simulation Thrust Document Prepared By Normand Modine Project...

128

NERSC/DOE FES Requirements Workshop Worksheet - Alex Friedman  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Friedman FES Requirements Worksheet 1.1. Project Information - Simulation of intense beams for heavy-ion-fusion science (HEDLP Inertial Fusion Energy) Document Prepared By...

129

NERSC/DOE FES Requirements Workshop Worksheet - Brian Wirth  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Brian Wirth Brian Wirth Brian Wirth 1.1. Project Information - Modeling plasma - surface interactions Document Prepared By Brian Wirth Project Title Modeling plasma - surface interactions Principal Investigator Brian Wirth Participating Organizations University of California, Berkeley; University of Tennessee; Oak Ridge National Laboratory Funding Agencies DOE SC DOE NSA NSF NOAA NIH Other: 2. Project Summary & Scientific Objectives for the Next 5 Years Please give a brief description of your project - highlighting its computational aspect - and outline its scientific objectives for the next 3-5 years. Please list one or two specific goals you hope to reach in 5 years. It is acknowledged that plasma-material interactions pose an immense scientific challenge and are one of the most critical issues in magnetic

130

Security Requirements for Remote Access to DOE and Applicable Contractor Information Technology Systems  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Notice establishes DOE policy requirements and responsibilities for remote connections to DOE and contractor information technology systems. The Notice will also ensure compliance with the requirements of DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03, to protect DOE information and information technology systems commensurate with the risk and magnitude of harm that could result from their unauthorized access, use, disclosure, modification or destruction. DOE N 205.15, dated 3/18/05, extends this directive until 3/18/06. No cancellations.

2004-02-19T23:59:59.000Z

131

DOE-STD-1082-94; DOE Standard Preparation, Review, and Approval of Implementaiton Plans For Nuclear Safety Requirements  

Broader source: Energy.gov (indexed) [DOE]

82-94 82-94 October 1994 DOE STANDARD PREPARATION, REVIEW, AND APPROVAL OF IMPLEMENTATION PLANS FOR NUCLEAR SAFETY REQUIREMENTS U.S. Department of Energy AREA SAFT Washington D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615)576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE95001461 DOE-STD-1082-94 iii FOREWORD 1. This Department of Energy (DOE) technical standard has been prepared by the Office of Environment, Safety and Health with the assistance of Steve

132

SSN comments to DOE NBP RFI communications requirements  

Broader source: Energy.gov (indexed) [DOE]

Comms Requirements Comms Requirements 12 July 2010 1/6 Michael Jung // Policy Director // Silver Spring Networks 888.406.1882 // mjung@silverspringnet.com (1) What are the current and future communications needs of utilities, including for the deployment of new Smart Grid applications, and how are these needs being met? Utilitiesʼ current communications needs are diverse, with considerable variation from utility to utility. Current communications needs that are related to, but generally pre-date, smart grid include: * System control and data acquisition (SCADA) * Drive-by meter reading * One-way direct load control * Mobile workforce management * Demand response, dynamic pricing for commercial/industrial customers In the smart grid-enabled future, utility smart grid applications will require

133

DOE/EIA-0515(85) Energy Information Administration Manufacturing Energy Consumption Survey:  

U.S. Energy Information Administration (EIA) Indexed Site

5(85) 5(85) Energy Information Administration Manufacturing Energy Consumption Survey: Fuel Switching, 1985 This publication is available from the Superintendent of Documents, U.S, Government Printing Office (GPO). Informa tion about purchasing this or other Energy Information Administration (ElA) publications may be obtained from the GPO or the ElA's National Energy Information Center (NEIC). Questions on energy statistics should be directed to the NEIC by man, telephone or telecommunications device for the deaf (TDD). Addresses, telephone numbers and hours appear below. National Energy Information Center. El-231 Energy Information Administration Forrestal Building, Room 1F-048 Washington. DC 20585 (202) 586-8800 TDD (202) 586-1181 Hours: 8:00-5:00, M-F, Eastern Time

134

DOE-HDBK-1163-2003; Integration of Multiple Hazard Analysis Requirements and Activities  

Broader source: Energy.gov (indexed) [DOE]

DOE-HDBK-1163-2003 October 2003 DOE HANDBOOK INTEGRATION OF MULTIPLE HAZARD ANALYSIS REQUIREMENTS AND ACTIVITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS DOE-HDBK-1163-2003 ii This document has been reproduced directly from the best available copy. It is available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-HDBK-1163-2003 iii FOREWORD 1. This Department of Energy (DOE) standard is approved for use by all DOE Components and

135

Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03)  

Broader source: Energy.gov (indexed) [DOE]

Tracking Document for Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) 4/17/2013 In the time since Revision 02 of the DOE Challenge Home National Program Requirements was released, DOE has modified, clarified, and refined various aspects of the program documents, primarily in response to partner questions and comments. This document is a summary of these edits, organized by the section of the National Program Requirements in which they appear. DOE has also posted the revised National Program Requirements, labeled Rev. 03, on its Web site at www.buildings.energy.gov/challenge. All revisions are categorized as a Change, Clarification, or Refinement. These are defined as follows: Change - The addition, deletion, or modification of a program requirement. A change will typically result from a partner

136

DOE Announces Webinars on Natural Gas for Biomass Technologies, Additive Manufacturing for Fuel Cells, and More  

Office of Energy Efficiency and Renewable Energy (EERE)

EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. Webinars are free; however, advanced registration is typically required.

137

Introduction to DOE Order 435.1 Low Level Radioactive Waste Disposal Requirements  

Broader source: Energy.gov [DOE]

Introduction to DOE Order 435.1 Low Level Radioactive Waste Disposal Requirements Christine Gelles*, U.S. Department of Energy ; Edward Regnier, U.S. Department of Energy; Andrew Wallo, U.S. Department of Energy Abstract: The Atomic Energy Act gives the U.S. Department of Energy (US DOE), the authority to regulate the management of radioactive waste generated by US DOE. This session will discuss DOE Order 435.1, which is protective of workers, public, and environment through specific requirements for the generation, treatment, storage, and disposal of US DOE radioactive waste. The Order is divided into four chapters: General Requirements, High-Level Waste, Transuranic Waste and Low-Level Waste. The requirements are consistent with existing promulgated Federal requirements but are specific to waste generated and disposed at US DOE facilities. A technical standard with requirements for documentation supporting the Disposal Authorization for a facility is also being prepared as well as a guide to accompany the Order. US DOE is in the process of updating the Order to maintain consistency with current practices and to increase efficiency in waste management. The draft Order will be available for public comment prior to being finalized.

138

DOE Order 458.1 Property Clearance Requirements and Factors Considered to Update Its Clearance Limits  

Broader source: Energy.gov [DOE]

DOE Order 458.1 Property Clearance Requirements and Factors Considered to Update Its Clearance Limits Carlos Corredor*, U.S. Department of Energy ;Gustavo Vasquez, U.S. Department of Energy; Derek Favret, U.S. Department of Energy This presentation will provide an explanation of the property clearance requirements contained in DOE O 458.1, including the methods to release or clear property: process knowledge and authorized limits. In addition, it will provide a special focus on the efforts to update the surface guidelines table in DOE directives. In planning to update its property clearance criteria DOE is considering many factors; such as their protectiveness, whether they are dose-based, consistency with voluntary consensus standards and national and international radiation protection recommendations, and consistency with DOE dose constraints. One option being considered is a hybrid approach using a national consensus standard for personal property and DOE derived values for real property.

139

DOE/EA-1449; Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash, King George County, Virginia (August 2002)  

Broader source: Energy.gov (indexed) [DOE]

9 9 ENVIRONMENTAL ASSESSMENT Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash, King George County, Virginia United States Department of Energy National Energy Technology Laboratory August 2002 Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray-dryer Ash, King George County, Virginia ENVIRONMENTAL ASSESSMENT 2 National Environmental Policy Act (NEPA) Compliance Cover Sheet Proposed Action: The proposed action is for the U.S. Department of Energy (DOE) to provide cost- shared financial support to Universal Aggregates, LLC, for the design, construction, and operation of a lightweight aggregate manufacturing plant at the Mirant-Birchwood Power Plant Facility (Mirant-Birchwood Facility) in King George County, Virginia.

140

Imperial Manufacturing: Proposed Penalty (2013-CE-5322) | Department of  

Broader source: Energy.gov (indexed) [DOE]

Proposed Penalty (2013-CE-5322) Proposed Penalty (2013-CE-5322) Imperial Manufacturing: Proposed Penalty (2013-CE-5322) January 31, 2013 DOE alleged in a Notice of Proposed Civil Penalty that Imperial Manufacturing, Inc. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Imperial Manufacturing: Proposed Penalty (2013-CE-5322) More Documents & Publications Imperial Manufacturing: Order (2013-CE-5322)

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Personnel Selection, Training, Qualification, and Certification Requirements for DOE Nuclear Facilities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order establishes selection, training, qualification, and certification requirements for contractor personnel who can impact the safety basis through their involvement in the operation, maintenance, and technical support of Hazard Category 1, 2, and 3 nuclear facilities. Cancels DOE O 5480.20A. Admin Chg 1, dated 7-29-13, cancels DOE O 426.2.

2010-04-21T23:59:59.000Z

142

DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models and  

Broader source: Energy.gov (indexed) [DOE]

Requires Westinghouse to Cease Sales of Two Light Bulb Models Requires Westinghouse to Cease Sales of Two Light Bulb Models and Allows Sale of Another DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models and Allows Sale of Another October 18, 2010 - 10:27am Addthis As a part of DOE's continuing enforcement action against Westinghouse Lighting Corporation, the company must cease sales of two light bulb models - medium based CFL basic model 15GLOBE/65/2 (Westinghouse product code 3800400) and general service fluorescent lamp model F40T12/CWE (Westinghouse product code 07521000) - because they do not meet DOE's energy efficiency standards. Based on test data provided by Westinghouse for basic model 15GLOBE/65/2, DOE has issued a Notice of Non-Compliance Determination to Westinghouse Lighting Corporation, requiring Westinghouse to halt sales and notify all

143

Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03)  

Broader source: Energy.gov [DOE]

Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03), 4/17/2013, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy website.

144

DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models and  

Broader source: Energy.gov (indexed) [DOE]

Requires Westinghouse to Cease Sales of Two Light Bulb Models Requires Westinghouse to Cease Sales of Two Light Bulb Models and Allows Sale of Another DOE Requires Westinghouse to Cease Sales of Two Light Bulb Models and Allows Sale of Another October 18, 2010 - 10:27am Addthis As a part of DOE's continuing enforcement action against Westinghouse Lighting Corporation, the company must cease sales of two light bulb models - medium based CFL basic model 15GLOBE/65/2 (Westinghouse product code 3800400) and general service fluorescent lamp model F40T12/CWE (Westinghouse product code 07521000) - because they do not meet DOE's energy efficiency standards. Based on test data provided by Westinghouse for basic model 15GLOBE/65/2, DOE has issued a Notice of Non-Compliance Determination to Westinghouse Lighting Corporation, requiring Westinghouse to halt sales and notify all

145

Application of Engineering and Technical Requirements for DOE Nuclear Facilities Standard Review Plan (SRP)  

Broader source: Energy.gov [DOE]

This Standard Review Plan (SRP), Application of Engineering and Technical Requirements for DOE Nuclear Facilities, was developed by the Chief of Nuclear Safety (CNS)1, Office of the Under Secretary for Nuclear Security, to help strengthen the technical rigor of line management oversight and federal monitoring of DOE nuclear facilities. This SRP (hereafter refers to as the Engineering SRP) provides consistent review guidance to assure that engineering and technical requirements are appropriately applied for the design, operations and disposition2 of DOE nuclear facilities. It is one of a series of three SRPs developed by the CNS. The other two SRPs address: 1) nuclear safety basis program review; and 2) application of requirements of DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets, and DOE-STD-1189, Integration of Safety into the Design Process, for DOE Critical Decision (CD) review and approval. These SRPs may be revised in the future to reflect changes in the DOE requirements, lessons learned, and experience/insights from nuclear facility design, operations, and disposition.

146

DOE/EIA-0516(85) Energy Information Administration Manufacturing Energy Consumption Survey:  

U.S. Energy Information Administration (EIA) Indexed Site

6(85) 6(85) Energy Information Administration Manufacturing Energy Consumption Survey: Changes in Energy Efficienc y 1980-198 5 0 6 6 T ' L I A n s n u e r b i r p u T J d J T O J u o i j E i a o s s v 1 I Q 3 H O O l O H d s > | i i e } a B B J O j s j o n p c u d j o s e u e s v : o } o n d s e s e - e s z ( 2 0 2 ) O Q ' u o i 6 u m s B M I U 8 L U U I 8 A O O ' S ' H s j u e i u n o o a j o l u e p u e i u u a d n g U J 9 1 S B 3 ' j - ^ ' ' U J ' d g - ' i u ' B g : s j n o H 1 8 1 . 1 - 9 8 9 ( 2 0 2 ) : A | U Q J B 9 Q 9 4 1 J 0 * 3 3 I A 8 Q S U O j l B O ! U n U J U J < X > 8 | 8 1 0 0 8 8 - 9 8 9 ( 2 0 2 ) 9 8 9 0 2 0 0 8 t O - d I L U O O U ' S u j p n n g U O | J B J t S ! U | L U p V U O U B L U J O J U I A B J 8 U 3 I . £ 2 - 1 3 ' J 8 i U 8 0 U O j l B U U J O J U l A 6 J 8 U 3 | B U O I i B N : M O | 8 q J B e d d B s j n o g p u s ' s j s q t u n u s u o i j d s i a j ' s s s s s j p p v ' ( Q Q l ) J Q J s o j A S p s u o ! J B O ! u n i u u u o o 8 | 8 i ' J O 8 u o q d a | 8 i ' H B I U A q Q | 3 N 9 M I 0 1 p s p s j j p s q p i n o i j s S O J I S J I B I S A B u o s u o u s s n o ' ( O I 3 N ) J Q 1 U 8 Q U O U B I U J O ^ U I A B j s u g I B U O J I B N s , v i 3 e g u o O d

147

DOE Steps Lead to Significant Increase in Compliance with Energy...  

Office of Environmental Management (EM)

Department of Energy Subpoenas Compliance Data from AeroSys, Inc. DOE Requires Manufacturers to Halt Sales of Heat Pumps and Air Conditioners Violating Minimum Appliance Standards...

148

TA-55 Final Safety Analysis Report Comparison Document and DOE Safety Evaluation Report Requirements  

SciTech Connect (OSTI)

This document provides an overview of changes to the currently approved TA-55 Final Safety Analysis Report (FSAR) that are included in the upgraded FSAR. The DOE Safety Evaluation Report (SER) requirements that are incorporated into the upgraded FSAR are briefly discussed to provide the starting point in the FSAR with respect to the SER requirements.

Alan Bond

2001-04-01T23:59:59.000Z

149

Technical support document: Survey data used in revising the energy conservation requirements in the manufactured home construction and safety standards  

SciTech Connect (OSTI)

This report documents data used in the development of revised energy conservation standards for manufactured housing. The approach used in developing the proposed standard revision is a cost-benefit analysis in which the costs of energy conservation measures (ECM) are balanced against the benefits of energy savings. The analysis used to develop the recommendations for revision of the US Department of Housing and Urban Development (HUD) energy conservation standards for manufactured housing requires information on specific ECMs. This technical support document contains the data from two of the three surveys that were used primarily to characterize the available ECMs and their associated costs. The analyses of these data are provided in separate reports. 5 refs.

Lee, A.D.; Conner, C.C.

1992-02-01T23:59:59.000Z

150

Does  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Does Does the cellulose-binding module move on the cellulose surface? Yu-San Liu Æ Yining Zeng Æ Yonghua Luo Æ Qi Xu Æ Michael E. Himmel Æ Steve J. Smith Æ Shi-You Ding Received: 26 November 2008 / Accepted: 11 May 2009 / Published online: 19 June 2009 Ó Springer Science+Business Media B.V. 2009 Abstract Exoglucanases are key enzymes required for the efficient hydrolysis of crystalline cellulose. It has been proposed that exoglucanases hydrolyze cellulose chains in a processive manner to produce primarily cellobiose. Usually, two functional modules are involved in the processive mechanism: a catalytic module and a carbohydrate-binding module (CBM). In this report, single molecule tracking techniques were used to analyze the molecular motion of CBMs labeled with quantum dots (QDs) and bound to cellulose crystals. By tracking the single QD, we observed that the family 2 CBM from

151

Attachment 6, Certification of Intent to Comply with DOE NEPA Requirements/Complete Environmental Questionnaire  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 6 CERTIFICATION OF INTENT TO COMPLY WITH DOE NEPA REQUIREMENTS/COMPLETE ENVIRONMENTAL QUESTIONNAIRE The Applicant, , if (name of institution) selected for award under Program Solicitation DE-PS26-02NT41430, "Support of Advanced Fossil Resource Utilization Research by Historically Black Colleges and Universities and Other Minority Institutions," agrees that, it will complete the Environmental Questionnaire within thirty (30) days of request, and provide any other environmental-related data as requested by DOE to satisfy NEPA requirements. (Signature of Authorized Official)

152

Personnel Selection, Training, Qualification, and Certification Requirements for DOE Nuclear Facilities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order establishes selection, training, qualification, and certification requirements for contractor personnel who can impact the safety basis through their involvement in the operation, maintenance, and technical support of Hazard Category 1, 2, and 3 nuclear facilities. Cancels DOE O 5480.20A. Admin Chg 1, dated 7-29-13.

2010-04-21T23:59:59.000Z

153

DOE's General Counsel Announces New Policy Requiring Online Posting of NEPA Categorical Exclusion Determinations to Further Transparency  

Broader source: Energy.gov [DOE]

Washington, DC - Consistent with the President's commitment to "disclose information rapidly in forms that the public can readily find and use," DOE announced today a new policy requiring all DOE...

154

Draft Supplemental Environmental Assessment For General Motors LLC Electric Drive Vehicle Battery and Component Manufacturing Initiative White Marsh, Maryland, DOE/EA-1723S (December 2010)  

Broader source: Energy.gov (indexed) [DOE]

DRAFT SUPPLEMENTAL ENVIRONMENTAL DRAFT SUPPLEMENTAL ENVIRONMENTAL ASSESSMENT For General Motors LLC Electric Drive Vehicle Battery and Component Manufacturing Initiative White Marsh, Maryland May 2011 U.S. DEPARTMENT OF ENERGY NATIONAL ENERGY TECHNOLOGY LABORATORY U.S. Department of Energy General Motors National Energy Technology Laboratory Supplemental Environmental Assessment i May 2011 ACKNOWLEDGEMENT This report was prepared with the support of the U.S. Department of Energy (DOE) under Award Number DE-EE0002629. U.S. Department of Energy General Motors National Energy Technology Laboratory Supplemental Environmental Assessment ii May 2011 COVER SHEET Responsible Agency: U.S. Department of Energy (DOE) Title: General Motors LLC Electric Drive Vehicle Battery and Component Manufacturing

155

Artisan Manufacturing: Proposed Penalty (2010-CW-0712) | Department of  

Broader source: Energy.gov (indexed) [DOE]

Artisan Manufacturing: Proposed Penalty (2010-CW-0712) Artisan Manufacturing: Proposed Penalty (2010-CW-0712) Artisan Manufacturing: Proposed Penalty (2010-CW-0712) September 8, 2010 DOE alleged in a Notice of Proposed Civil Penalty that Artisan Manufacturing Company, Inc. failed to certify a variety of faucets as compliant with the applicable water conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable water conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Artisan Manufacturing: Proposed Penalty (2010-CW-0712) More Documents & Publications Artisan Manufacturing: Order (2010-CW-0712)

156

Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 1 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Mark Leavitt Quantum Fuel Systems Technologies Worldwide, Inc. 25242 Arctic Ocean Drive Lake Forest, CA 92630 Phone: (949) 399-4584 Email: mleavitt@qtww.com DOE Managers HQ: Nancy Garland Phone: (202) 586-5673 Email: Nancy.Garland@ee.doe.gov GO: Jesse Adams Phone: (720) 356-1421 Email: Jesse.Adams@go.doe.gov Contract Number: DE-FG36-08GO18055 Subcontractors: * Boeing Research and Technology, Seattle, WA * Pacific Northwest National Laboratory (PNNL), Richland, WA Project Start Date: September 1, 2008 Project End Date: March 31, 2013 Fiscal Year (FY) 2012 Objectives Develop new methods for manufacturing Type IV

157

DOE Requires Air-Con International to Cease Sales of Inefficient Air  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Requires Air-Con International to Cease Sales of Inefficient Requires Air-Con International to Cease Sales of Inefficient Air Conditioners and Proposes Penalties DOE Requires Air-Con International to Cease Sales of Inefficient Air Conditioners and Proposes Penalties September 21, 2010 - 6:43pm Addthis The Department has issued a Notice of Noncompliance Determination and Proposed Civil Penalty to Air-Con, International, requiring Air-Con to cease the sale of certain air-conditioning systems in the United States and proposing a civil penalty of $231,090 for sales of these products in violation of the applicable energy efficiency standards. This action reflects the Department's continued commitment to act aggressively to remove unlawful products from the market. In March, 2010, the Department issued a subpoena requiring Air-Con to

158

SSL Manufacturing Roadmap  

Broader source: Energy.gov [DOE]

Report detailing DOE Solid-State Lighting Program activities to accelerate manufacturing improvements that reduce costs and enhance the quality of SSL products.

159

Enforcement Guidance Supplement 99-02: DOE Enforcement Activities of Internal Dosimetry Program Requirements  

Broader source: Energy.gov [DOE]

Section 1.3 of the Operational Procedure entitled Enforcement of DOE Nuclear Safety Requirements under Price-Anderson Amendments Act of 1988, published in June 1998, provides the opportunity for the Office of Enforcement and Investigation (EH Enforcement) to issue clarifying guidance in a timely manner with respect to the processes used in its enforcement activities. The focus of this enforcement guidance clarifies internal dosimetry program requirements identified by the Department of Energys nuclear safety requirements in 10 CFR 835 (Occupational Radiation Protection Programs) and 10 CFR 830.120 (Quality Assurance Requirements). To develop the enforcement guidance, EH Enforcement convened a DOE working group which included representatives from the Field Office elements and the Office of Worker Protection Programs and Hazards Management, which is the office responsible for the content and technical clarifications of 10 CFR 835. The guide discusses the following areas: (1) prospective determination of employees that are likely to receive 100 millirem (mrem) or greater per 10 CFR 835.402, (Individual Monitoring); (2) application of enforcement policy in taking credit for respiratory protection in prospective determinations; (3) use of contractors policies regarding personnel internal exposure to radioactive material; (4) As Low As Reasonably Achievable (ALARA) programs; (5) clarification of enforcement with regard to internal dosimetry programs; and Final Comments.

160

Modification of the U.S. Department of Energy`s (DOE) sytem of radiation protection requirements and guidance  

SciTech Connect (OSTI)

DOE has undertaken a major modification of its system of radiation protection guidance and requirements. The objectives of this modification are to (1) eliminate unnecessary and redundant requirements, (2) clearly delineate requirements from guidance, (3) codify all radiation protection requirements, and (4) move from a compliance based approach towards a performance based approach. To achieve these objectives DOE has (1) canceled DOE Order 5480.11, {open_quotes}Radiation Protection for DOE Workers,{close_quotes} DOE Order 5480.15, {open_quotes}Department of Energy Laboratory Accreditation Program (DOELAP) for Personnel Dosimetry,{close_quotes} and DOE Notice 5400.13, {open_quotes}Sealed Radioactive Source Accountability,{close_quotes} (2) converted the DOE Radiological Control (RadCon) Manual from mandatory to non mandatory status, and (3) issued DOE Notice 441.1 to maintain those requirements (not in 10 CFR 835) considered necessary for radiation protection of workers. DOE has initiated actions to (1) amend 10 CFR 835 (the Federal rule on occupational radiation protection in the DOE complex) to incorporate the requirements, or their equivalent, in DOE Notice 441.1, (2) issue a technical standard containing guidance on DOELAP, (3) reissue the DOE RadCon Manual as a non mandatory technical standard that reflects the amendments to 10 CFR 835, and (4) revise the implementation guides on radiation protection for consistency with 10 CFR 835 and the RadCon Manual. As a result of these modifications, the system of radiation protection in the DOE will become more comparable with the system of radiation protection used by commercial industry and with the system of protection applied to other areas of worker health and safety.

O`Connell, P.V.; Rabovsky, J.L.; Zobel, S.G. [Department of Energy, Germantown, MD (United States)

1996-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Duracold Refrigeration Manufacturing: Proposed Penalty (2013-CE-5342) |  

Broader source: Energy.gov (indexed) [DOE]

Duracold Refrigeration Manufacturing: Proposed Penalty Duracold Refrigeration Manufacturing: Proposed Penalty (2013-CE-5342) Duracold Refrigeration Manufacturing: Proposed Penalty (2013-CE-5342) February 21, 2013 DOE alleged in a Notice of Proposed Civil Penalty that Duracold Refrigeration Manufacturing Company, LLC failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Duracold Refrigeration Manufacturing: Proposed Penalty (2013-CE-5342)

162

Manufacturer Voluntarily Reports Noncompliance | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturer Voluntarily Reports Noncompliance Manufacturer Voluntarily Reports Noncompliance Manufacturer Voluntarily Reports Noncompliance June 28, 2012 - 9:05am Addthis Cooper Power Systems, LLC ("Cooper"), a wholly-owned subsidiary of Cooper Industries notified the U.S. Department of Energy's ("DOE") Office of Enforcement that it had distributed three noncompliant basic models (five total units) of liquid-immersed distribution transformers in U.S. commerce. Each of these models failed to meet the minimum level of efficiency required by DOE regulations. Cooper discovered that it had distributed the noncompliant basic models when preparing its first certification report under new DOE regulations. Cooper immediately notified DOE of the noncompliance and requested guidance on corrective

163

Microsoft Word - TIA Reply Comments DOE NBP RFI Smart Grid Communications Requirements.doc  

Broader source: Energy.gov (indexed) [DOE]

26, 2010 26, 2010 US Department of Energy Office of the General Counsel 1000 Independence Avenue, SW Room 6A245 Washington, DC 20585 Re: NBP RFI-Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy The Telecommunications Industry Association (TIA) is pleased to provide comments on the communications requirements of electric utilities relevant to smart grid policy. TIA appreciates the proactive role the Department of Energy (DOE) is taking in executing the recommendations from the FCC in the National Broadband Plan. Electric utilities and the ICT industry share a long tradition of partnering to build and maintain the communications networks contributing to the security and reliability of the grid.

164

Analysis of waste treatment requirements for DOE mixed wastes: Technical basis  

SciTech Connect (OSTI)

The risks and costs of managing DOE wastes are a direct function of the total quantities of 3wastes that are handled at each step of the management process. As part of the analysis of the management of DOE low-level mixed wastes (LLMW), a reference scheme has been developed for the treatment of these wastes to meet EPA criteria. The treatment analysis in a limited form was also applied to one option for treatment of transuranic wastes. The treatment requirements in all cases analyzed are based on a reference flowsheet which provides high level treatment trains for all LLMW. This report explains the background and basis for that treatment scheme. Reference waste stream chemical compositions and physical properties including densities were established for each stream in the data base. These compositions are used to define the expected behavior for wastes as they pass through the treatment train. Each EPA RCRA waste code was reviewed, the properties, chemical composition, or characteristics which are of importance to waste behavior in treatment were designated. Properties that dictate treatment requirements were then used to develop the treatment trains and identify the unit operations that would be included in these trains. A table was prepared showing a correlation of the waste physical matrix and the waste treatment requirements as a guide to the treatment analysis. The analysis of waste treatment loads is done by assigning wastes to treatment steps which would achieve RCRA compliant treatment. These correlation`s allow one to examine the treatment requirements in a condensed manner and to see that all wastes and contaminant sets are fully considered.

NONE

1995-02-01T23:59:59.000Z

165

Additive Manufacturing for Mass Customization  

Science Journals Connector (OSTI)

Additive manufacturing (AM) is a disruptive manufacturing technology that requires no tooling for production....additively build parts from numerous materials, including polymers, metals and ceramics. Within this...

Phil Reeves; Chris Tuck; Richard Hague

2011-01-01T23:59:59.000Z

166

FDA Exemption Letter, 78EL-01DOE by LSSG for GOCG Facilities  

Broader source: Energy.gov [DOE]

Food and Drug Administration response to Department of Energy's request for clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility may be considered a laser manufacturer and subject to FDA laser manufacturer requirements and other points of interpretation of the FDA Exemption Letter, 78EL-01DOE (DOE exemption or exemption) by the LSSG for GOCG facilities.

167

Implementation of the Clean Air Act, Title V operating permit program requirements for the U.S. DOE Oak Ridge Reservation facilities  

SciTech Connect (OSTI)

Title V of the Clean Air Act (CAA) establishes a new permit program requiring major sources and sources subject to Title III (Hazardous Air Pollutants) to obtain a state operating permit. Historically, most states have issued operating permits for individual emission units. Under the Title V permit program, a single permit will be issued for all of the emission units at the facility much like the current National Pollutant Discharge Elimination System (NPDES) permit program. The permit will specify all reporting, monitoring, and record-keeping requirements for the facility. Sources required to obtain permits include (a) major sources that emit 100 tons per year or more of any criteria air contaminant, (b) any source subject to the HAP provisions of Title III, (c) any source subject to the acid rain provisions of Title IV, (d) any source subject to New Source Performance Standards, and (e) any source subject to new source review under the nonattainment or Prevention of Significant Deterioration provisions. The State of Tennessee Title V Operating Permit Program was approved by EPA on August 28, 1996. This paper will provide details of initiatives underway at US Department of Energy (DOE) Oak Ridge Reservation (ORR) Facilities for implementation of requirements under the Title V Operating Permit Program. The ORR encompasses three DOE Facilities: the Y-12 Plant, Oak Ridge National Laboratory (ORNL), and the East Tennessee Technology Park (ETTP). The Y-12 Plant manufactures component parts for the national nuclear weapons program; the ORNL is responsible for research and development activities including nuclear engineering, engineering technologies, and the environmental sciences; and the ETTP conducts a variety of research and development activities and is the home of a mixed waste incinerator. Each of the three DOE Facilities is considered a major source under Title V of the CAA.

Humphreys, M.P. [Dept. of Energy Oak Ridge Operations Office, TN (United States). Environmental Protection Div.

1998-12-31T23:59:59.000Z

168

"Order Module--DOE O 426.2, PERSONNEL SELECTION, TRAINING, QUALIFICATION, AND CERTIFICATION REQUIREMENTS FOR DOE NUCLEAR FACILITIES  

Broader source: Energy.gov [DOE]

"To establish selection, training, qualification, and certification requirements for contractor personnel who can impact the safety basis through their involvement in the operation, maintenance,...

169

USA Manufacturing: Proposed Penalty (2013-CE-5336) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Proposed Penalty (2013-CE-5336) Proposed Penalty (2013-CE-5336) USA Manufacturing: Proposed Penalty (2013-CE-5336) January 31, 2013 DOE alleged in a Notice of Proposed Civil Penalty that USA Manufacturing failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. USA Manufacturing: Proposed Penalty (2013-CE-5336) More Documents & Publications USA Manufacturing: Order (2013-CE-5336) Amerikooler: Proposed Penalty (2013-CE-5307)

170

Manufacturing Perspective  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 BOEING is a trademark of Boeing Management Company. Copyright © 2009 Boeing. All rights reserved. Compressed Hydrogen Storage Workshop Manufacturing Perspective Karl M. Nelson (karl.m.nelson@boeing.com) Boeing Research & Technology Engineering, Operations & Technology | Boeing Research & Technology Materials & Fabrication Technology EOT_RT_Sub_Template.ppt | 1/12/2009 | Structural Tech 2 Copyright © 2009 Boeing. All rights reserved. DOE Hydrogen Program Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels Mark Leavitt, Alex Ly Quantum Fuel Systems Technologies Worldwide Inc. Karl Nelson, Brice Johnson The Boeing Company Ken Johnson, Kyle Alvine, Stan Pitman, Michael Dahl, Daryl Brown

171

DOE Testing Reveals Samsung Refrigerator Does Not Meet Energy Star  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Testing Reveals Samsung Refrigerator Does Not Meet Energy Star Testing Reveals Samsung Refrigerator Does Not Meet Energy Star Requirements DOE Testing Reveals Samsung Refrigerator Does Not Meet Energy Star Requirements March 16, 2010 - 4:28pm Addthis DOE-initiated testing has revealed that a Samsung refrigerator (model RF26VAB), which the company had claimed was Energy Star compliant, consumed more energy than permitted by the Energy Star program. Test results for the Samsung model at issue show that, when tested in accordance with DOE's test procedure, it consumed between 7 and 11.4 percent more energy than the Energy Star requirement. Samsung is no longer manufacturing this model, although it may still be available from some retail outlets. Based on this testing, DOE is referring Samsung Model RF26VAB to the U.S.

172

DOE-HDBK-1139/3-2003; Chemical Management (Volume 3 of 3) Consolidated Chemical User Safety and Health Requirements  

Broader source: Energy.gov (indexed) [DOE]

TS TS NOT MEASUREMENT SENSITIVE DOE-HDBK-1139/3-2003 DOE HANDBOOK CHEMICAL MANAGEMENT (Volume 3 of 3) Consolidated Chemical User Safety and Health Requirements U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. September 2003 DOE-HDBK-1139/3-2003 This document has been reproduced directly from the best available copy. It is available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. It is available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161;

173

Memorandum requesting a clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility  

Broader source: Energy.gov [DOE]

Memorandum requesting a clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility may be considered a laser manufacturer and subject to FDA laser manufacturer requirements and other points of interpretation of the FDA Exemption Letter, 78EL-01DOE (DOE exemption or exemption) by the LSSG for GOCG facilities.

174

DOE  

Gasoline and Diesel Fuel Update (EIA)

DOE DOE /E/A- 0202( 83//Q J Sh or t-T er m En er gy O ut lo ok a to m Quar terly Proje ction s Febru ary 1983 Ene rgy Info rma tion Adm inist ratio n Was hing ton, D.C. t rt jrt .or t lor t lor t .lor t- ior t- ior t <.o rt ort . m .er m -Te rm -Te rm -Te rm -Te rm -Te rm -Te rm -Te rm -Te rm -Te rm -Te rm -Te rm -Te rm -T erm -T erm -T erm Nrm ue rgy En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y En erg y ^n erg y Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Ou tlo ok Sh ort -T erm 1 Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm Sh ort -T erm

175

Manufacturing Initiative | Clean Energy | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Areas Research Areas Buildings Climate & Environment Manufacturing Fossil Energy Sensors & Measurement Sustainable Electricity Systems Biology Transportation Clean Energy Home | Science & Discovery | Clean Energy | Research Areas | Manufacturing SHARE Manufacturing Initiative Titanium robotic hand holding sphere fabricated using additive manufacturing Oak Ridge National Laboratory is supporting the DOE's Office of Energy Efficiency and Renewable Energy (EERE) Clean Energy Manufacturing Initiative focusing on American competitiveness in clean energy manufacturing. The DOE Initiative has two primary objectives-increase US competitiveness in the production of clean energy products (e.g., wind turbines, solar panels, energy efficient appliances, light bulbs, vehicles and automotive

176

DOE-STD-1033-92; Guide to Good Practices for Operations and Administration Updates Through Required Reading  

Broader source: Energy.gov (indexed) [DOE]

3-92 3-92 December 1992 CHANGE NOTICE NO.1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS AND ADMINISTRATION UPDATES THROUGH REQUIRED READING U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1033-92 December 1998 Guide to Good Practices for Operations and Administration Updates Through

177

Electrolyzer Manufacturing Progress and Challenges  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrolyzer Manufacturing Electrolyzer Manufacturing Progress and Challenges John Torrance, Director of Manufacturing DOE Manufacturing Workshop 8/12/11 Outline * Proton Commercialization Status: PEM Electrolysis * Current Manufacturing Limitations: Stack - Cost Breakdown - Approaches * Current Manufacturing Limitations: System - Cost Breakdown - Approaches * Potential Impact * Summary and Conclusions 2 3 * World leader in Proton Exchange Membrane (PEM) electrolyzer technology * Founded in 1996 - changed name from Proton Onsite in April 2011 to reflect product expansion. * ISO 9001:2008 registered * Over 1,500 systems operating in 62 different countries. Cell Stacks Complete Systems Turnkey Solutions Military Applications Proton Energy Proton Onsite Headquarters in Wallingford, CT Capabilities * Complete product development, manufacturing & testing

178

DOE Order 458.1 Property Clearance Requirements and Factors Considered...  

Office of Environmental Management (EM)

contained in DOE O 458.1, including the methods to release or clear property: process knowledge and authorized limits. In addition, it will provide a special focus on the efforts...

179

Suspect/Counterfeit Items Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1B, Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides guidance to assist DOE/NNSA and its contractors in mitigating the safety threat of suspect/counterfeit items (S/CIs). Cancels DOE G 440.1-6, Implementation Guide for use with Suspect/Counterfeit Items Requirements of DOE O 440.1, Worker Protection Management; 10 CFR 830.120; and DOE O 5700.6C, Quality Assurance, dated 6-30-97. Canceled by DOE G 414.1-2B.

2004-11-03T23:59:59.000Z

180

Manufacturing Innovation in the DOE  

Broader source: Energy.gov (indexed) [DOE]

and stationary applications - Emerging applications, e.g. civil infrastructure, oil & gas, etc. * "Identify key opportunities in the CF supply chain where U.S. can achieve or...

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

DOE Issues Request for Information for Scope Requirements Planning at Los Alamos National Laboratory  

Broader source: Energy.gov [DOE]

Cincinnati The U.S. Department of Energy (DOE) Environmental Management Consolidated Business Center (EMCBC) today issued a Sources Sought/Request for Information (RFI) seeking 8(a) small business concerns with the capabilities to provide architect-engineer-like services to support a potential upcoming Environmental Management (EM) procurement at Los Alamos National Laboratory (LANL).

182

Social brains, simple minds: does social complexity really require cognitive complexity?  

Science Journals Connector (OSTI)

...social engagement than does interpreting social...us how, at the most fundamental neuronal level, our...system. In The Oxford handbook of evolutionary psychology...Miller, L.CStories are fundamental to meaning and memory...mind. In The Oxford handbook of evolutionary psychology...

2007-01-01T23:59:59.000Z

183

MDF | Manufacturing Demonstration Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BTRIC CNMS CSMB CFTF HFIR MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

184

MDF | Manufacturing Demonstration Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Working with MDF Working with MDF Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

185

DOE/EA-1678: Final Environmental Assessment for Department of Energy Loan To Nissan North America, Inc., for Advanced Technology Electric Vehicle Manufacturing Project in Smyrna, Tennessee (November 2009)  

Broader source: Energy.gov (indexed) [DOE]

8 8 ENVIRONMENTAL ASSESSMENT FOR DEPARTMENT OF ENERGY LOAN TO NISSAN NORTH AMERICA, INC., FOR ADVANCED TECHNOLOGY ELECTRIC VEHICLE MANUFACTURING PROJECT IN SMYRNA, TENNESSEE U.S. Department of Energy Advanced Technology Vehicles Manufacturing Loan Program Washington, DC 20585 November 2009 FINAL ENVIRONMENTAL ASSESSMENT i SUMMARY Introduction The U.S. Department of Energy (DOE) is proposing to issue a loan to Nissan North America, Inc., (Nissan) for the production of advanced technology electric vehicles (EVs). Nissan's Electric Vehicle Production Project (EV Project) would include the expansion of the Smyrna, Tennessee Manufacturing Plant through the construction of an approximately 1.3 million square foot lithium-ion (Li-ion) battery plant (EV Battery

186

DOE Requires Air-Con International to Cease Sales of Inefficient...  

Broader source: Energy.gov (indexed) [DOE]

requiring Air-Con to submit detailed information about the energy consumption of its products and how Air-Con marketed and sold them in the United States. Based on Air-Con's...

187

Catalyst Manufacturing Science and  

E-Print Network [OSTI]

Catalyst Manufacturing Science and Engineering Consortium (CMSEC) Rutgers University New Jersey, U, automotive, and energy industries makes and/or uses catalysts, there has been no academic program focusing on the operations required to make catalytic materials. Thus, catalyst manufacturing processes are often designed

188

A Total Cost of Ownership Model for Design and Manufacturing Optimization of Fuel Cells in Stationary and Emerging Market Applications - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 3 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Max Wei (Primary Contact), Tom McKone, Tim Lipman 1 , David Dornfeld 2 , Josh Chien 2 , Chris Marnay, Adam Weber, Paul Beattie 3 , Patricia Chong 3 Lawrence Berkeley National Laboratory (LBNL) 1 Cyclotron Road MS 90R-4000 Berkeley, CA 94706 Phone: (510) 486-5220 Email: mwei@lbl.gov DOE Manager HQ: Jason Marcinkoski Phone: (202) 586-7466 Email: Jason.Marcinkoski@ee.doe.gov Subcontractors: 1 University of California, Berkeley, Transportation Sustainability Research Center and DOE Pacific Region Clean Energy Application Center, Berkeley, CA 2 University of California, Berkeley, Laboratory for Manufacturing and Sustainability, Department of Mechanical Engineering, Berkeley, CA

189

User requirements for wearable smart textiles: does the usage context matter (medical vs. sports)?  

Science Journals Connector (OSTI)

Wearable smart textiles are a promising approach to provide health related services (e.g., permanent monitoring of vital parameters), and can be used in different context (such as sports or health care). But so far, smart textiles [ST] have not significantly ... Keywords: medical technology, smart textiles, technology acceptance, user diversity, user requirements

Julia van Heek, Anne Kathrin Schaar, Bianka Trevisan, Patrycja Bosowski, Martina Ziefle

2014-05-01T23:59:59.000Z

190

Manufacturing Pre-Solicitation Transcript | Department of Energy  

Office of Environmental Management (EM)

Transcript Manufacturing Pre-Solicitation Transcript Transcript from the US DOE Hydrogen Program Manufacturing R&D Pre-Solicitation Meeting presolicitationtranscript.pdf...

191

Li-Ion Battery Cell Manufacturing | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Li-Ion Battery Cell Manufacturing Li-Ion Battery Cell Manufacturing 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer...

192

Manufacturing Science and Technology: R & D Projects  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

R&D Projects R&D Projects This page is included to give visitors to the web site a sample of the R&D work that this Center undertakes. The Manufacturing Science & Technology Center works mainly in the Development-to-Application part of the Research-to-Development-to-Application cycle.Staff in the Center, however, do perform work in the research-to-development area with the aim of providing our customers with more robust, quicker, and/or less expensive processes to meet Sandia's manufacturing needs. We also do R&D to develop processes required for the manufacture of specialized materials and components that can no longer be obtained either in the commercial market or at one of the DOE's production facilities. Within Sandia, most manufacturing R&D is carried out by the Manufacturing

193

1 | Fuel Cell Technologies Program Source: US DOE 9/27/2011 eere.energy.gov H2 and FC Technologies Manufacturing R&D Workshop  

E-Print Network [OSTI]

1 | Fuel Cell Technologies Program Source: US DOE 9/27/2011 eere.energy.gov H2 and FC Technologies. of Energy #12;2 | Fuel Cell Technologies Program Source: US DOE 9/27/2011 eere.energy.gov · Reduction in the DOE Portfolio? #12;3 | Fuel Cell Technologies Program Source: US DOE 3/3/2011 eere.energy.gov Fuel

194

Specification for HEPA Filters Used By DOE Contractors  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-3020-2005 DOE-STD-3020-2005 December 2005 Supersedes DOE-STD-3020-97 January 1997 DOE TECHNICAL STANDARD Specification for HEPA Filters Used by DOE Contractors U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited FOREWARD This U.S. Department of Energy (DOE) standard supersedes DOE-STD-3020-97 and is approved for use by DOE and its contractors. This standard was developed primarily for application in DOE programs. It provides guidance to DOE contractors for procurement and required testing of High Efficiency Particulate Air (HEPA) filters used in DOE nuclear facilities. Required testing is performed by the filter manufacturer and

195

Specification for HEPA Filters Used By DOE Contractors  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-3020-2005 DOE-STD-3020-2005 December 2005 Supersedes DOE-STD-3020-97 January 1997 DOE TECHNICAL STANDARD Specification for HEPA Filters Used by DOE Contractors U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited FOREWARD This U.S. Department of Energy (DOE) standard supersedes DOE-STD-3020-97 and is approved for use by DOE and its contractors. This standard was developed primarily for application in DOE programs. It provides guidance to DOE contractors for procurement and required testing of High Efficiency Particulate Air (HEPA) filters used in DOE nuclear facilities. Required testing is performed by the filter manufacturer and

196

Sales Tax Incentives for Energy-Efficient Manufactured Homes | Department  

Broader source: Energy.gov (indexed) [DOE]

Sales Tax Incentives for Energy-Efficient Manufactured Homes Sales Tax Incentives for Energy-Efficient Manufactured Homes Sales Tax Incentives for Energy-Efficient Manufactured Homes < Back Eligibility Residential Savings Category Home Weatherization Commercial Weatherization Other Sealing Your Home Design & Remodeling Windows, Doors, & Skylights Maximum Rebate 100% sales tax exemption if home meets or exceeds U.S. EPA and U.S. DOE energy requirements or has been designated as meeting or exceeding such requirements under the federal Energy Star program Program Info State South Carolina Program Type Sales Tax Incentive Rebate Amount Sales tax cap of $300 Provider South Carolina Energy Office In July 2008, [http://www.scstatehouse.gov/sess117_2007-2008/bills/1141.htm SB 1141] (known as the ''Energy-Efficient Manufactured Homes Incentive

197

Upcoming Funding Opportunity for Water Power Manufacturing |...  

Energy Savers [EERE]

Water Power Manufacturing Upcoming Funding Opportunity for Water Power Manufacturing March 24, 2014 - 12:00pm Addthis On March 24, 2014, the U.S. Department of Energy (DOE)...

198

Refrigerator Manufacturers: Order (2013-CE-5341)  

Broader source: Energy.gov [DOE]

DOE ordered Refrigerator Manufacturers, LLC to pay a $8,000 civil penalty after finding Refrigerator Manufacturers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

199

QTR Webinar: Chapter 8- Industry and Manufacturing  

Broader source: Energy.gov [DOE]

The DOE EERE Advanced Manufacturing Office hosted a QTR webinar to obtain input from Leaders in Academia, Industry, and Government on Chapter 8, Industry and Manufacturing, and the associated Technology Assessments.

200

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Information Integration & Infrastructure Manufacturing Information Integration & Infrastructure PDF format (47 kb) The Information Infrastructure Team in the Computer Applications for Manufacturing organization can provide programming and analysis support for information applications for manufacturing. The Team works closely with customers to help them define their requirements. The Team's experience and expertise can help your manufacturing information needs. Capabilities Provide computer hardware and software standards that directly support the seamless manufacturing initiative. Develop graphical user interfaces (GUI) for applications using the proprietary Windows environment or an open system design using Web servers and client browsers. Provide computer hardware support, including all personal computer

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

EERE Quality Control Workshop Final Report: Proceedings from the EERE Quality Control Workshop, in support of the DOE Clean Energy Manufacturing Initiative; Golden, Colorado, December 9-10, 2013  

SciTech Connect (OSTI)

The U.S. Department of Energy Office of Energy Efficiency & Renewable Energy (EERE) has recognized the cross-cutting, pre-competitive and enabling nature of quality control for a wide range of clean energy technologies. As such, the Fuel Cell Technologies Office, Solar Energy Technologies Office, Vehicle Technologies Office, Building Technologies Office, and Advanced Manufacturing Office decided to explore needs and potential cross-office synergies in this area by holding the EERE Quality Control Workshop, in support of the DOE Clean Energy Manufacturing Initiative. This report summarizes the purpose and scope of the workshop; reviews the current status and state-of-the-art for in-line quality control; summarizes the results from three breakout sessions; and presents conclusions and recommendations.

Not Available

2014-05-01T23:59:59.000Z

202

Quality Assurance Management System Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides information on principles and practices used to establish and implement an effective quality assurance program or quality management system in accordance with the requirements of 10 CFR 830. Cancels DOE G 414.1-2. Canceled by DOE G 414.1-2B.

2005-06-17T23:59:59.000Z

203

Supplemental Requirements for the Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Notice supplements review and approval requirements of DOE O 350.2A, Use of Management and Operating (M&O) or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area, dated 10-29-03.

2005-10-19T23:59:59.000Z

204

Formation of the K30 (group I) capsule in Escherichia coli O9:K30 does not require attachment to lipopolysaccharide lipid A-core.  

Science Journals Connector (OSTI)

...covalent linkage to the LPS core, nor does it require association with KLPS. KLps...proteinase K-treated whole-cell lysates does not preclude the presence of trace amounts...138-186. In E. T. Reitschel (ed.), Handbook of endotoxin. I. chemistry of endotoxin...

P R MacLachlan; W J Keenleyside; C Dodgson; C Whitfield

1993-12-01T23:59:59.000Z

205

A proliferation resistant hexagonal tight lattice BWR fueled core for increased burnup and reduced fuel storage requirements. Annual progress report: August, 1999 to July, 2000 [DOE NERI  

SciTech Connect (OSTI)

(OAK/B204) A proliferation resistant hexagonal tight lattice BWR fueled core for increased burnup and reduced fuel storage requirements. Annual progress report: August, 1999 to July, 2000 [DOE NERI

Hiroshi Takahashi; Upendra Rohatgi; T.J. Downar

2000-08-04T23:59:59.000Z

206

Safety Software Guide for Use with 10 CFR 830, Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides acceptable methods for implementing the safety software quality assurance requirements of draft DOE O 414.1C, Quality Assurance. Certified 11-3-10. No cancellation.

2005-06-17T23:59:59.000Z

207

Advanced Drivetrain Manufacturing  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) supports advanced manufacturing techniques that are leading to the "next-generation" of more reliable, affordable, and efficient wind turbine drivetrains. As turbines continue to increase in size, each and every component must also be scaled to meet the demands for renewable energy.

208

Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE)  

Office of Energy Efficiency and Renewable Energy (EERE)

This document highlights DOE's Office of Energy Efficiency and Renewable Energy's advancements in saving energy in homes, buildings, and industrial plants.

209

Manufacturing News  

Broader source: Energy.gov (indexed) [DOE]

news Office of Energy Efficiency & news Office of Energy Efficiency & Renewable Energy Forrestal Building 1000 Independence Avenue, SW Washington, DC 20585 en FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute http://energy.gov/articles/factsheet-next-generation-power-electronics-manufacturing-innovation-institute manufacturing-innovation-institute" class="title-link">FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute

210

DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance  

Broader source: Energy.gov [DOE]

"This Department of Energy (DOE or Department) Guide provides information plus acceptable methods for implementing the safety software quality assurance (SQA) requirements of DOE O 414.1C, Quality Assurance, dated 6-17-05. DOE O 414.1C requirements supplement the quality assurance program (QAP) requirements of Title 10 Code of Federal Regulations (CFR) 830, Subpart A, Quality Assurance, for DOE nuclear facilities and activities. The safety SQA requirements for DOE, including the National Nuclear Security Administration (NNSA), and its contractors are necessary to implement effective quality assurance (QA) processes and achieve safe nuclear facility operations. DOE promulgated the safety software requirements and this guidance to control or eliminate the hazards and associated postulated accidents posed by nuclear operations, including radiological operations. Safety software failures or unintended output can lead to unexpected system or equipment failures and undue risks to the DOE/NNSA mission, the environment, the public, and the workers. Thus DOE G 414.1-4 has been developed to provide guidance on establishing and implementing effective QA processes tied specifically to nuclear facility safety software applications. DOE also has guidance1 for the overarching QA program, which includes safety software within its scope. This Guide includes software application practices covered by appropriate national and international consensus standards and various processes currently in use at DOE facilities.2 This guidance is also considered to be of sufficient rigor and depth to ensure acceptable reliability of safety software at DOE nuclear facilities. This guidance should be used by organizations to help determine and support the steps necessary to address possible design or functional implementation deficiencies that might exist and to reduce operational hazards-related risks to an acceptable level. Attributes such as the facility life-cycle stage and the hazardous nature of each facilitys operations should be considered when using this Guide. Alternative methods to those described in this Guide may be used provided they result in compliance with the requirements of 10 CFR 830 Subpart A and DOE O 414.1C. Another objective of this guidance is to encourage robust software quality methods to enable the development of high quality safety applications."

211

Fuel Cell Membrane Electrode Assembly Manufacturing R&D - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

7 7 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Michael Ulsh (Primary Contact), Guido Bender, Niccolo Aieta, Huyen Dinh National Renewable Energy Laboratory 15013 Denver West Parkway Golden, CO 80401 Phone: (303) 275-3842 Email: michael.ulsh@nrel.gov DOE Manager HQ: Nancy Garland Phone: (202) 586-5673 Email: Nancy.Garland@ee.doe.gov Partners: * Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA * Colorado School of Mines, Golden, CO * University of Hawaii, Hawaii Natural Energy Institute, Honolulu, HI * Rensselaer Polytechnic Institute, Troy, NY

212

Two Manufacturers Agree to Civil Penalties to Resolve Enforcement...  

Energy Savers [EERE]

Civil Penalty to Resolve Light Bulb Efficiency Violations DOE Collects Civil Penalties for Failure to Certify DOE Collects 80,000 Civil Penalty From Showerhead Manufacturer...

213

Manufacturing of Low-Cost, Durable Membrane Electrode Assemblies Engineered for Rapid Conditioning - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 1 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program F. Colin Busby W.L. Gore & Associates, Inc (Gore) Gore Electrochemical Technologies Team 201 Airport Road Elkton, MD 21921 Phone: (410) 392-3200 Email: CBusby@WLGore.com DOE Managers HQ: Nancy Garland Phone: (202) 586-5673 Email: Nancy.Garland@ee.doe.gov GO: Jesse Adams Phone: (720) 356-1421 Email: Jesse.Adams@go.doe.gov Contract Number: DE-FСЗ6-08G018052 Subcontractors: * UTC Power, South Windsor, CT * University of Delaware, Newark, DE (UD) * University of Tennessee, Knoxville, TN (UTK) Project Start Date: October 1, 2008 Project End Date: June 30, 2014

214

DOE Announces Selections for SSL Core Technology Research (Round 7), Product Development (Round 7), and U.S. Manufacturing (Round 2) Funding Opportunities  

Broader source: Energy.gov [DOE]

The National Energy Technology Laboratory, on behalf of the U.S. Department of Energy (DOE), is pleased to announce the following selections for solid-state lighting (SSL) funding opportunities....

215

DOE Announces Selections for SSL Core Technology (Round 6), Product Development (Round 6), and U.S. Manufacturing (Round 1) Funding Opportunities  

Broader source: Energy.gov [DOE]

The National Energy Technology Laboratory, on behalf of the U.S. Department of Energy (DOE), is pleased to announce the following selections for solid-state lighting (SSL) funding opportunities...

216

Manufacturing Fuel Cell Manhattan Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to to DOE Fuel Cell Manufacturing Workshop 2011 John Christensen, PE NREL Consultant DOE Fuel Cell Market Transformation Support August 11, 2011 Manufacturing Fuel Cell Manhattan Project √ Identify manufacturing cost drivers to achieve affordability √ Identify best practices in fuel cell manufacturing technology √ Identify manufacturing technology gaps √ Identify FC projects to address these gaps MFCMP Objectives Completed Final Report due out Nov 2010 B2PCOE Montana Tech SME's Industry Academia Government FC Consortiums Power ranges * <0.5 kW (man portable / man wearable) * 0.5 kW< Power range < 10 kW (mobile power) Fuels: Hydrogen and reformed hydrocarbons *Packaged Fuels < 0.5 kW * Near term solution * Move through the supply chain like batteries

217

Manufacturing technology  

SciTech Connect (OSTI)

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

218

Uropathogenic Escherichia coli CFT073 Is Adapted to Acetatogenic Growth but Does Not Require Acetate during Murine Urinary Tract Infection  

Science Journals Connector (OSTI)

...d-serine (Fig. 1a), though CFT073 does reach stationary phase slightly sooner...sodium acetate as a sole carbon source than does MG1655 as shown in Fig. 1d. These data...metabolism, dissimilatory acetate metabolism does play a role in colonization of the murine...

Andrew T. Anfora; David K. Halladin; Brian J. Haugen; Rodney A. Welch

2008-10-06T23:59:59.000Z

219

DOE Testing Reveals Samsung Refrigerator Does Not Meet Energy...  

Broader source: Energy.gov (indexed) [DOE]

Testing Reveals Samsung Refrigerator Does Not Meet Energy Star Requirements DOE Testing Reveals Samsung Refrigerator Does Not Meet Energy Star Requirements March 16, 2010 - 4:28pm...

220

Duracold Refrigeration Manufacturing: Order (2013-CE-5342) | Department of  

Broader source: Energy.gov (indexed) [DOE]

Duracold Refrigeration Manufacturing: Order (2013-CE-5342) Duracold Refrigeration Manufacturing: Order (2013-CE-5342) Duracold Refrigeration Manufacturing: Order (2013-CE-5342) April 25, 2013 DOE ordered Duracold Refrigeration Manufacturing Company, LLC to pay a $8,000 civil penalty after finding Duracold Refrigeration Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Duracold Refrigeration Manufacturing. Duracold Refrigeration Manufacturing: Order (2013-CE-5342) More Documents & Publications Duracold Refrigeration Manufacturing: Proposed Penalty (2013-CE-5342) North Star Refrigerator: Order (2013-CE-5355) Schott Gemtron: Order (2013-CE-5358

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE)  

Broader source: Energy.gov (indexed) [DOE]

energy-saving solutions, which helps make our country energy-saving solutions, which helps make our country run better through increased efficiency-better plants, manufacturing processes, products, new homes, ways to improve older homes, and buildings in which to work, shop, and lead our everyday lives. Highlights of the EERE portfolio include: Better Buildings Challenge EERE is spearheading this new public-private leadership program to reduce commercial building energy use by 20% by 2020, to help save $40 billion on energy bills annually, and to grow American jobs. More than 100 diverse organizations have already committed to this goal, including companies such as Best Buy, Staples, 3M, and Alcoa, and state and local governments in Los Angeles, California; Will County, Illinois; and the state of North

222

DOE/EIS-0236/SA-6 Final Supplement Analysis for Pit Manufacturing Facilities at Los Alamos National Laboratory, Stockpile Stewardship and Management Programmatic Environmental Impact Statement  

Broader source: Energy.gov (indexed) [DOE]

DATE: REPLY TO ATTN OF: DP-45 (G. Palmer, 6-1785) SUBJECT: DETERMINATION OF THE NEED FOR ADDITIONAL NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) REVIEW TO: Dave Beck, DP-20 As requested in your action memorandum, same subject, I have reviewed the attached Final Supplement Analysis for Pit Manufacturing Facilities at Los Alamos National Laboratory, Stockpile Stewardship and Management Programmatic Environmental Impact Statement, dated August 1999. This analysis was prepared in accordance with 10 CFR 1021.314, contains the comments on the draft Supplement Analysis, dated June 1999, and responds to the comments in Appendix D. Based on my review of the six issues analyzed in the Supplement Analysis, I have determined that none of the information and analysis represent substantial changes to the actions

223

DOE Issues Noncompliance Notices | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE Issues Noncompliance Notices DOE Issues Noncompliance Notices DOE Issues Noncompliance Notices November 1, 2011 - 12:23pm Addthis The U.S. Department of Energy's Office of Enforcement issued a Notice of Noncompliance Determination to Haier America Trading, L.L.C., regarding Haier compact chest freezer model number HNCM070, which is manufactured in China. DOE tested four units of the freezer and determined that the units consumed energy at the rates of 363, 341, 352, and 387 kWh/yr, exceeding the federal limit by an average of 32 percent. The Office of Enforcement also issued a Notice of Noncompliance Determination to Goodman Manufacturing regarding commercial package central air conditioner model CPC180XXX3BXXXAA. The federal energy conservation standard requires that commercial package central air conditioners operate

224

Additive Manufacturing: Implications on Research and Manufacturing  

E-Print Network [OSTI]

Additive Manufacturing: Implications on Research and Manufacturing With recent developments, etc.), additive manufacturing (AM) has the potential to become a transformative technology in innovation-based manufacturing. Agencies such as the Department of Defense, the National Science Foundation

Crawford, T. Daniel

225

Additive Manufacturing : Changing the Rules of Manufacturing  

Science Journals Connector (OSTI)

Aspects of 3D printing and additive or layer manufacturing can be treated as modular manufacturing or modular components of manufacturing in the contemporary sense. Such modular manufacturing involves specialized...

2014-06-01T23:59:59.000Z

226

Policy Flash 2014-33 Revised Department of Energy (DOE) Acquisition Guide Chapter 7.2 Strategic Sourcing Requirements  

Broader source: Energy.gov [DOE]

Questions concerning this policy flash should be directed to Mike Larson at 202-287-1426 or email at Michael.Larson@hq.doe.gov

227

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) |  

Broader source: Energy.gov (indexed) [DOE]

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) May 28, 2010 DOE issued a Notice of Noncompliance Determination to Summit Manufacturing, Inc. finding that 4SHP13LE136P + 15001+CA042A964+TDR basic model, a split-system air conditioning heat pump with a heat pump coil, does not comport with the energy conservation standards. DOE determined the product was noncompliant based on the company's own testing. Summit must immediately notify each person (or company) to whom Summit distributed the noncompliant products that the product does not meet Federal standards. In addition, Summit must provide to DOE documents and records showing the number of units Summit distributed and to whom. The manufacturer and/or

228

Risk-Informed Safety Requirements for H2 Codes and Standards Development - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 5 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Aaron Harris (Primary Contact), Jeffrey LaChance, Katrina Groth Sandia National Laboratories P.O. Box 969 Livermore, CA 94551-0969 Phone: (925) 294-4530 Email: apharri@sandia.gov DOE Manager HQ: Antonio Ruiz Phone: (202) 586-0729 Email: Antonio.Ruiz@ee.doe.gov Project Start Date: October 1, 2003 Project End Date: Project continuation and direction determined annually by DOE Fiscal Year (FY) 2012 Objectives Present results of indoor refueling risk assessment to the * National Fire Protection Association (NFPA) 2 Fueling Working Group. Perform and document required risk assessment (with * input from NFPA 2 and others) for developing science- based risk-informed codes and standards for indoor

229

Computer Recommendations for incoming students in 2012-2013 The college of Engineering and Computer Science does not require students to have their own  

E-Print Network [OSTI]

Computer Recommendations for incoming students in 2012-2013 The college of Engineering and Computer Science does not require students to have their own personal computer. Students will have access to computers through their department, college, and university here on campus. However we do feel that having

Wu, Shin-Tson

230

Advanced Manufacture of Reflectors  

Broader source: Energy.gov [DOE]

The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

231

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machining Machining PDF format (236 kb) MS&T's machining group consists of two departments: Manufacturing Processing, and Manufacturing Processes and Services. The two departments team to build, procure, and assemble unique prototype and production hardware with diverse quality requirements. The in-house capability can manufacture hardware ranging from microscopic to proportions measured in feet and tons. The group's outside contacts and resources are almost boundless. This team's expertise includes: precision machining, welding, fabrication and assembly, aircraft quality sheet metal construction, and explosives machining and assembly. The department can manage a variety of activities: design modifications, in-house fabrication, outside shop selection and surveillance and manufacturing records management.

232

fem | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement,...

233

Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on...

234

Goodman Manufacturing: Order (2012-CE-1509)  

Broader source: Energy.gov (indexed) [DOE]

Company, Company, L.P., Respondent Issued: August 7, 2012 ) ) ) ) ) ) ORDER Case Number: 2012-CE-1509 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Goodman Manufacturing Company, L.P. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. § 429.12. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

235

Green Manufacturing  

SciTech Connect (OSTI)

Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

Patten, John

2013-12-31T23:59:59.000Z

236

DOE Announces Webinars on Natural Gas for Biomass Technologies...  

Broader source: Energy.gov (indexed) [DOE]

Natural Gas for Biomass Technologies, Additive Manufacturing for Fuel Cells, and More DOE Announces Webinars on Natural Gas for Biomass Technologies, Additive Manufacturing for...

237

Additive manufacturing of metallic tracks on  

E-Print Network [OSTI]

Additive manufacturing of metallic tracks on green ceramic/dielectrics Problem this technology (note: may require additional tooling/ set up time) · Rapid Prototyping & small scale manufacture microelectronics such as manufacture of LTCC ceramic/ Dielectric antenna and rapid PCB prototyping or repair

Painter, Kevin

238

Batteries - Materials Processing and Manufacturing Breakout session  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Processing and Manufacturing Materials Processing and Manufacturing Breakout Session #1 - Discussion of Performance Targets and Barriers Comments on the Achievability of the Targets * PHEV40 and AEV 100 possible with success in current R&D * Achievable with Li-ion manufacturing improvements and advanced chemistries in current Li-ion R&D * AEV300 more challenging * Requires manufacturing improvements and materials and chemistry improvements * Quantify benefits/ drawbacks of fast charging vs. increased electrode cost Barriers Interfering with Reaching the Targets * Materials cost * Need: Material synthesis in large quantities/ with increased impurities and broader size distributions or advanced manufacturing * Electrode thickness - manufacturing and performance * Separator cost/ performance/ safety

239

MST: Organizations: Manufacturing Processes & Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Processing Manufacturing Processing Manufacturing Process, Science, and Technology Mark Smith Mark Smith, Senior Manager Manufacturing Process Science and Technology conducts research and development on advanced manufacturing process and materials technologies. It provides manufacturing process development, technical consulting, and technology transfer to support Sandia product realization needs. This organization also provides prototype fabrication and specialized production services, as required, to support Sandia missions. Departments Dianna Blair Mike Kelly Alex Roesler Paul C. McKey Thin Film, Vacuum, and Packaging Organic Materials Ceramics and Glass Meso Mfg. and System Development Dianna Blair, Manager Mike Kelly, Manager Alex Roesler, Manager Paul C. McKey,

240

DOE Responses to DOE Challenge Home (formerly Builders Challenge...  

Broader source: Energy.gov (indexed) [DOE]

Energy. doeresponseschallengehomecomments.pdf More Documents & Publications Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) DOE...

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

DOE-FLEX: DOE's Telework Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order establishes the requirements and responsibilities for the Departments telework program. Cancels DOE N 314.1.

2013-02-11T23:59:59.000Z

242

Advanced Manufacture of Reflectors  

SciTech Connect (OSTI)

The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of each reflected beam from the paraboloid focus give a direct measure of surface slope error. Key findings A gravity sag method for large (2.5 m2) second surface glass solar reflectors has been developed and demonstrated to a uniquely high level of accuracy. Mirror surface slope accuracy of 0.65 mrad in one dimension, 0.85 mrad in 2 dimensions (point focus) has been demonstrated by commercial partner REhnu using this process. This accuracy exceeds by a factor of two current solar reflector accuracy. Our replicas meet the Sunshot accuracy objective of 2 mrad optical, which requires better than 1 mrad rms slope error. Point-focus as well as line-focus mirrors have been demonstrated at 1.65 m x 1.65 m square a unique capability. The new process using simple molds is economical. The molds for the 1.65 m square reflectors are bent and machined steel plates on a counter-weighted flotation support. To minimize thermal coupling by radiative heat transfer, the mold surface is grooved and gilded. The molds are simple to manufacture, and have minimal thermal stresses and distortion in use. Lapping and bending techniques have been developed to obtain better than 1 mrad rms surface mold accuracy. Float glass is sagged into the molds by rapid radiative heating, using a custom high power (350 kW) furnace. The method of manufacture is well suited for small as well as large volume production, and as it requires little capital investment and no high technology, it could be used anywhere in the world to make solar concentrating reflectors. A novel slope metrology method for full 1.65 aperture has been demonstrated, with 25 mm resolution across the face of the replicas. The method is null and therefore inherently accurate: it can easily be reproduced without high-tech equipment and does not need sophisticated calibration. We find by cross calibration with reference trough reflectors from RioGlass that our null-test laser system yields a measurement accuracy better than 0.4 mrad rms slope error. Our system is inexpensive and could have broad application for test

Angel, Roger [University of Arizona

2014-12-17T23:59:59.000Z

243

Manufacturing Glossary  

Gasoline and Diesel Fuel Update (EIA)

Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Home > Energy Users > Energy Efficiency Page > Glossary for the Manufacturing Sector Glossary For the Manufacturing Sector Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to metallic iron. It is commonly used as a fuel within the steel works. Boiler Fuel: An energy source to produce heat that is transferred to the boiler vessel in order to generate steam or hot water. Fossil fuels are the primary energy sources used to produce heat for boilers.

244

Manufactured Home Energy Audit (MHEA)Users Manual (Version 7)  

SciTech Connect (OSTI)

The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the U.S. Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA uses a relatively standard Windows graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment appliances, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. Weatherization retrofit measures are evaluated based on the predicted energy savings after installation of the measure, the measure cost, and the measure life. Finally, MHEA recommends retrofit measures that are energy and cost effective for the particular home being evaluated. MHEA evaluates each manufactured home individually and takes into account local weather conditions, retrofit measure costs, and fuel costs. The recommended package of weatherization retrofit measures is tailored to the home being evaluated. More traditional techniques apply the same package of retrofit measures to all manufactured homes, often the same set of measures that are installed into site-built homes. Effective manufactured home weatherization can be achieved only by installing measures developed specifically for manufactured homes. The unique manufactured home construction characteristics require that each of these measures is evaluated separately in order to devise a package of measures that will result in high energy and dollar savings. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes. The National Renewable Energy Laboratory originally developed MHEA for the U.S. Department of Energy Weatherization Assistance Program. Conversion to a Windows-based program with additional modifications has been performed by the Oak Ridge National Laboratory. Many energy consumption and economic calculations resemble those found in the Computerized Instrumented Residential Audit written by Lawrence Berkeley National Laboratory and the National Energy Audit written by Oak Ridge National Laboratory. The calculations are similar in structure but have been altered to more accurately represent a manufactured home's unique energy use characteristics. Most importantly, MHEA helps meet the DOE Weatherization Assistance Program goals to increase client comfort and use federal dollars wisely.

Gettings, M.B.

2003-01-27T23:59:59.000Z

245

Manufacturing Energy and Carbon Footprints  

E-Print Network [OSTI]

Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much...

Brueske, S.; Lorenz, T.

2012-01-01T23:59:59.000Z

246

Goodman Manufacturing: Noncompliance Determination (2011-SE-4301) |  

Broader source: Energy.gov (indexed) [DOE]

Noncompliance Determination (2011-SE-4301) Noncompliance Determination (2011-SE-4301) Goodman Manufacturing: Noncompliance Determination (2011-SE-4301) October 17, 2011 DOE issued a Notice of Noncompliance Determination to Goodman Manufacturing finding that model CPC180XXX3BXXXAA (CPC180*) of commercial package air conditioner does not comport with the energy conservation standards. DOE determined the product was noncompliant based on DOE testing . Goodman must immediately notify each person (or company) to whom Goodmany distributed the noncompliant products that the product does not meet Federal standards. In addition, Goodman must provide to DOE documents and records showing the number of units Goodman distributed and to whom. The manufacturer and/or private labeler of the product may be subject to civil

247

1999 Annual Report on Waste Generation and Pollution Prevention Progress as Required by DOE Order 5400.1  

SciTech Connect (OSTI)

Hanford's missions are to safely clean-up and manage the site's legacy wastes, and to develop and deploy science and technology. Through these missions Hanford will contribute to economic diversification of the region. Hanford's environmental management or clean-up mission is to protect the health and safety of the public, workers, and the environment; control hazardous materials; and utilize the assets (people, infrastructure, and site) for other missions. Hanford's science and technology mission is to develop and deploy science and technology in the service of the nation including stewardship of the Hanford Site. Pollution Prevention is a key to the success of these missions by reducing the amount of waste to be managed and identifying/implementing cost effective waste reduction projects. Hanford's original mission, the production of nuclear materials for the nation's defense programs, lasted more than 40 years, and like most manufacturing operations, Hanford's operations generated large quantities of waste and pollution. However, the by-products from Hanford operations pose unique problems like radiation hazards, vast volumes of contaminated water and soil, and many contaminated structures including reactors, chemical plants and evaporation ponds. The clean-up activity is an immense and challenging undertaking. Including characterization and decommissioning of 149 single shell storage tanks, treating 28 double shell tanks, safely disposing of over 2,100 metric tons of spent nuclear fuel stored on site, removing numerous structures, and dealing with significant solid waste, ground water, and land restoration issues.

SEGALL, P.

2000-03-01T23:59:59.000Z

248

Solid-State Lighting Manufacturing Workshop  

Broader source: Energy.gov [DOE]

Nearly 200 lighting industry leaders, chip makers, fixture and component manufacturers, and others gathered in Fairfax, Virginia, on April 21 and 22, 2009, for the first-ever DOE Solid-State...

249

Stronger Manufacturers' Energy Efficiency Standards for Residential...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2006 - 11:09am Addthis WASHINGTON, DC -- To increase the energy efficiency of residential air conditioners, the U.S. Department of Energy (DOE) has issued new manufacturing...

250

Association of Home Appliance Manufacturers Comment  

Broader source: Energy.gov [DOE]

The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Regulatory Burden RFI, 79 Fed. Reg. 37963 (July 3, 2014).

251

Refrigerator Manufacturers: Proposed Penalty (2013-CE-5341)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Refrigerator Manufacturers, LLC failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

252

Energy Department Trains Veterans in Advanced Manufacturing  

Office of Energy Efficiency and Renewable Energy (EERE)

Today, the first 24 participants marked the successful completion of the Advanced Manufacturing Internship program, a pilot effort sponsored by the U.S. Department of Energys (DOE) Office of Energy Efficiency and Renewable Energy (EERE).

253

LG Dismisses Lawsuit against DOE over Energy Star Enforcement | Department  

Broader source: Energy.gov (indexed) [DOE]

LG Dismisses Lawsuit against DOE over Energy Star Enforcement LG Dismisses Lawsuit against DOE over Energy Star Enforcement LG Dismisses Lawsuit against DOE over Energy Star Enforcement May 28, 2010 - 2:32pm Addthis DOE announced today that LG Electronics voluntarily dismissed its lawsuit against DOE over the Department's decision to require LG to use the same energy efficiency tests as other manufacturers and to withdraw the Energy Star label from certain LG refrigerators. The Department's decision also had the effect of requiring LG to cease distributing those refrigerators in commerce no later than March 17, 2010. LG had sought a preliminary injunction against DOE's action last December but lost. LG then proceeded to remove the Energy Star label from the affected products and ceased distributing them in commerce by the March deadline. Nevertheless, the

254

A Bold Goal: Boston Manufacturing R&D Workshop Video  

Broader source: Energy.gov [DOE]

View the video from Jim Brodrick's opening presentation at the April 2011 DOE SSL Manufacturing R&D Workshop in Boston, Massachusetts.

255

Modular Process Equipment for Low Cost Manufacturing of High...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Manufacturing of High Capacity Prismatic Li-Ion Cell Alloy Anodes 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

256

DOE Hydrogen Program Manufacturing R & D  

E-Print Network [OSTI]

or significantly reduce cell stack conditioning time, thereby driving down cost as well as fuel cell assembly time Cells Membrane Electrode Assemblies (MEAs) and Stacks Current Status · Approximate cost range from $3 of alternative, lower cost approaches to fuel cell construction To Be Addressed: · Analysis of current MEA

257

Industrial Activities at DOE: Efficiency, Manufacturing, Process...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

edges, engine pylon covers, and engine nacelle acoustic liners; replace aluminum Air Pollution Control Systems - Silica-titania composites used in air pollution control...

258

USA Manufacturing Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Broader source: Energy.gov (indexed) [DOE]

USA Manufacturing USA Manufacturing Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5336 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department ofEnet'gy ("DOE") and USA Manufacturing ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.P.R.§§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

259

Clean Energy Manufacturing Resources - Technology Maturation | Department  

Broader source: Energy.gov (indexed) [DOE]

Maturation Maturation Clean Energy Manufacturing Resources - Technology Maturation Clean Energy Manufacturing Resources - Technology Maturation Find resources to help you commercialize and market your clean energy technology or product. For technology maturation, areas to consider include regulations and standards; exporting; product testing or demonstration; energy-efficient product qualifications; and energy efficiency and performance improvements for plants. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Comply With Regulations and Standards DOE Building Technologies Office: Appliance and Equipment Standards - minimum energy conservation standards for more than 50 categories of appliances and equipment. Implementation, Certification and Enforcement - explains DOE

260

Clean Energy Manufacturing Resources - Technology Feasibility | Department  

Broader source: Energy.gov (indexed) [DOE]

Feasibility Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Learn About U.S. Department of Energy Priorities Advanced Manufacturing Office Plans - features information on analysis, plan implementations, and commercial outcomes. Bioenergy Technologies Office Plans - includes technology roadmaps, multiyear program plans, analysis, and more.

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Photographic lens manufacturing and production technologies  

E-Print Network [OSTI]

An investigation was conducted to determine the methods and processes required for the manufacture of photographic objective lenses. Production of photographic lenses requires incredible precision in the melting, mixing, ...

Kubaczyk, Daniel Mark

2011-01-01T23:59:59.000Z

262

DOE Issues Noncompliance Notices | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Issues Noncompliance Notices Issues Noncompliance Notices DOE Issues Noncompliance Notices November 1, 2011 - 12:23pm Addthis The U.S. Department of Energy's Office of Enforcement issued a Notice of Noncompliance Determination to Haier America Trading, L.L.C., regarding Haier compact chest freezer model number HNCM070, which is manufactured in China. DOE tested four units of the freezer and determined that the units consumed energy at the rates of 363, 341, 352, and 387 kWh/yr, exceeding the federal limit by an average of 32 percent. The Office of Enforcement also issued a Notice of Noncompliance Determination to Goodman Manufacturing regarding commercial package central air conditioner model CPC180XXX3BXXXAA. The federal energy conservation standard requires that commercial package central air conditioners operate

263

Manufacturing Innovation Multi-Topic Workshop  

Broader source: Energy.gov [DOE]

DOEs Advanced Manufacturing Office (AMO) and the Office of Secretary of Defense Manufacturing Technology Program (OSD ManTech) held a joint workshop October 8 and 9, 2014 in Fort Worth, TX. This workshop identified mid-Technology Readiness Level (TRL) research and development (R&D) needs, market and supply chain challenges, and shared facility needs for advanced manufacturing. The workshop complemented a recently released AMO Request for Information (RFI) and a recently amended OSD ManTech RFI. AMO and OSD ManTech sought to know more about the challenges associated with advanced manufacturing technology that potentially could be overcome by pre-competitive collaboration as part of a Manufacturing Innovation Institute.

264

Design of Experiment Methods in Manufacturing: Basics and Practical Applications  

Science Journals Connector (OSTI)

This chapter discuses fundamentals and important practical aspects of design of experiments (DOE) in manufacturing. Starting with the basic terminology involved in DOE, it walks a potential reader through major t...

Viktor P. Astakhov

2012-01-01T23:59:59.000Z

265

DOE Steps Lead to Significant Increase in Compliance with Energy Efficiency  

Broader source: Energy.gov (indexed) [DOE]

Steps Lead to Significant Increase in Compliance with Energy Steps Lead to Significant Increase in Compliance with Energy Efficiency Reporting Requirements DOE Steps Lead to Significant Increase in Compliance with Energy Efficiency Reporting Requirements January 12, 2010 - 12:00am Addthis WASHINGTON DC - The Department of Energy announced today that it has received certifications for over 600,000 residential appliances in 15 different product categories in response to the Department's enhanced energy efficiency enforcement efforts. DOE recently announced that manufacturers had until January 8, 2010 to submit correct energy use data to the Department of Energy before aggressive enforcement actions were taken. The certification data provided by 160 different manufacturers will allow DOE to review manufacturers' compliance with minimum energy

266

DOE Zero Energy Ready Home Case Study: Southern Homes, Russellville...  

Energy Savers [EERE]

Southern Homes, Russellville, AL DOE Zero Energy Ready Home Case Study: Southern Homes, Russellville, AL Case study of the first manufactured home built to the DOE Zero Energy...

267

DOE Announces Webinars on Real Time Energy Management, Solar...  

Energy Savers [EERE]

Addthis Related Articles DOE Announces Webinars on Natural Gas for Biomass Technologies, Additive Manufacturing for Fuel Cells, and More DOE Announces Webinars on the National...

268

DOE Zero Energy Ready Home Case Study: Southern Energy Homes...  

Office of Environmental Management (EM)

Southern Energy Homes, Russellville, AL DOE Zero Energy Ready Home Case Study: Southern Energy Homes, Russellville, AL Case study of the first manufactured home built to the DOE...

269

A new approach to the design and optimisation of support structures in additive manufacturing  

Science Journals Connector (OSTI)

Support structures are required in several additive manufacturing (AM) processes to sustain overhanging parts,...

G. Strano; L. Hao; R. M. Everson

2013-06-01T23:59:59.000Z

270

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Design, Survey Design, Implementation, and Estimates 411 Energy Information Administration/Manufacturing Consumption of Energy 1994 Overview of Changes from Previous Surveys Sample Design. The MECS has increased its sample size by roughly 40 percent since the 1991 survey, increasing the designed sample size from 16,054 establishments to 22,922. This increase in size and change in sampling criteria required a departure from using the Annual Survey of Manufactures (ASM) as the MECS sampling frame. For 1994, establishments were selected directly from the 1992 Census of Manufactures (CM) mail file, updated by 1993 ASM. Sample Frame Coverage. The coverage in the 1994 MECS is 98 percent of the manufacturing population as measured in total payroll. The sampling process itself provided that level of coverage, and no special adjustments were

271

The President's Manufacturing Initiative  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The President's The President's Manufacturing Initiative Manufacturing Initiative Roadmap Workshop on Roadmap Workshop on Manufacturing R&D for Manufacturing R&D for the Hydrogen Economy the Hydrogen Economy Washington, D.C. Washington, D.C. July 13, 2005 July 13, 2005 Dale Hall Dale Hall Acting Chair, Interagency Working Group on Acting Chair, Interagency Working Group on Manufacturing Research and Development Manufacturing Research and Development National Science and Technology Council National Science and Technology Council and and Director, Manufacturing Engineering Laboratory Director, Manufacturing Engineering Laboratory National Institute of Standards and Technology National Institute of Standards and Technology U.S. Department of Commerce U.S. Department of Commerce

272

Metrics for Sustainable Manufacturing  

E-Print Network [OSTI]

a system or process in maintaining a sustainable level of afor manufacturing processes to achieve truly sustainablesustainable phase of the automobile manufacturing process

Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

2008-01-01T23:59:59.000Z

273

Advanced Manufacturing Office Overview  

Broader source: Energy.gov [DOE]

Overview presentation by the Advanced Manufacturing Office for the Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing

274

Additive Manufacturing Technology Assessment  

Office of Environmental Management (EM)

subtractive manufacturing 41 methods 1. Additive manufacturing is also called as 3D printing, 42 additive fabrication, or freeform fabrication. These new 43 techniques, while...

275

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

276

Additive Manufacturing Technologies  

Science Journals Connector (OSTI)

Rapid Prototyping is the construction of complex three-dimensional parts using additive manufacturing technology.

Jrgen Stampfl; Markus Hatzenbichler

2014-01-01T23:59:59.000Z

277

Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Science & Innovation » Energy Efficiency » Manufacturing Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Manufacturing is the lifeblood of the American economy -- providing jobs for hard working American families and helping increase U.S. competitiveness in the global marketplace. The Energy Department is committed to growing America's manufacturing industry by helping companies become leaders in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The

278

DOE-FLEX: DOE's Telework Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The directive establishes the requirements and responsibilities for the Departments telework program. Canceled by DOE O 314.1.

2011-07-05T23:59:59.000Z

279

Roadmap: Applied Engineering Manufacturing Systems Bachelor of Science  

E-Print Network [OSTI]

Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT 15000 Introduction to Human Communication 3 Fulfills Kent Core Additional Kent Core Requirement 3 See #12;Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT

Sheridan, Scott

280

DOE Selects 26 Universities to Assess Industrial Energy Efficiency |  

Broader source: Energy.gov (indexed) [DOE]

26 Universities to Assess Industrial Energy Efficiency 26 Universities to Assess Industrial Energy Efficiency DOE Selects 26 Universities to Assess Industrial Energy Efficiency July 24, 2006 - 4:32pm Addthis Smart use of energy key to America's industrial and manufacturing competitiveness WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced the selection of 26 universities across the country for negotiation of award to set up and operate regional Industrial Assessment Centers (IAC). The centers will employ faculty and students to assist small-to-medium sized American manufacturing plants to use energy more efficiently. Based on DOE's Office of Energy Efficiency and Renewable Energy Industrial Technologies Program requirement, anticipated funding could be up to $6 million over the next two years (FY'07 and FY'08).

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

O 325.2, Position Management and Classification Sep 24, 2014 Nuclear Explosive and Weapon Surety Program Sep 24, 2014 Nuclear Explosive and Weapon Surety Program Sep 24, 2014...

282

DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search form enables you to find content on the site by specifying one or more search terms. Remember that you can use the quick search anytime, it's normally good enough, this...

283

Fuel Cell Technologies Office American Energy and Manufacturing Competitiveness Parternship: Fuel Cell Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

12/19/2013 eere.energy.gov 12/19/2013 eere.energy.gov Fuel Cell Technologies Office American Energy & Manufacturing Competitiveness Partnership http://www.aemcsummit.compete.org/ Fuel Cell Manufacturing Dr. Sunita Satyapal Director, Fuel Cell Technologies Office Dr. Nancy Garland Technology Development Manager, Manufacturing R&D, Fuel Cell Technologies Office 2 | Fuel Cell Technologies Program Source: US DOE 12/19/2013 eere.energy.gov The Future of Fuel Cell Manufacturing Panel Session * Federal program: DOE Fuel Cell Technologies Office * National trade association: Fuel Cell & Hydrogen Energy Association * State Coalition Example: Ohio Fuel Cell Coalition 3 | Fuel Cell Technologies Program Source: US DOE 12/19/2013 eere.energy.gov * Clean Energy Patent Growth Index

284

Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs |  

Broader source: Energy.gov (indexed) [DOE]

Energetx Composites: Retooling Manufacturing, Creating Michigan Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs July 23, 2012 - 4:58pm Addthis Using its fiberglass technology expertise and a grant from the Energy Department's State Energy Program (SEP), Energetx Composites was able to shift its operations to producing wind turbine blades. | Photo courtesy of Energetx Composites. Using its fiberglass technology expertise and a grant from the Energy Department's State Energy Program (SEP), Energetx Composites was able to shift its operations to producing wind turbine blades. | Photo courtesy of Energetx Composites. Kristin Swineford Communication Specialist, Weatherization and Intergovernmental Programs What does this mean for me?

285

American Manufacturing Gets a Boost | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

American Manufacturing Gets a Boost American Manufacturing Gets a Boost American Manufacturing Gets a Boost June 12, 2012 - 7:52pm Addthis DOE is investing in projects that will increase energy efficiency in the manufacturing industry. One project will develop a new process for producing titanium components that could reduce the materials needed by ten-fold in aircraft and vehicle manufacturing. | Courtesy of Flickr user markjhandel, Creative Commons license. DOE is investing in projects that will increase energy efficiency in the manufacturing industry. One project will develop a new process for producing titanium components that could reduce the materials needed by ten-fold in aircraft and vehicle manufacturing. | Courtesy of Flickr user

286

Manufacturing Consumption of Energy 1994  

Gasoline and Diesel Fuel Update (EIA)

Energy Information Administration/Manufacturing Consumption of Energy 1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas restructuring, gas pipelines were opened to multiple users. Manufacturers or their representatives could go directly to the wellhead to purchase their natural gas, arrange the transportation, and have the natural gas delivered either by the local distribution company or directly through a connecting pipeline. More recently, the electricity markets have been undergoing change. When Congress passed the Energy Policy Act of 1992, requirements were included not only to open access to the ownership of electricity generation, but also to open access to the transmission lines so that wholesale trade in electricity would be possible. Now several States, including California and

287

Order Module--SAFETY SOFTWARE GUIDE FOR USE WITH 10 CFR 830, SUBPART A, QUALITY ASSURANCE REQUIREMENTS, AND DOE O 414.1C, QUALITY ASSURANCE  

Broader source: Energy.gov [DOE]

According to DOE-STD-1146-2007, General Technical Base Qualification Standard, this module was to summarize the quality assurance information found in attachments 3, 4, and 5, of DOE O 414.1C,...

288

Lessons Learned During the Manufacture of the NCSX Modular Coils  

SciTech Connect (OSTI)

The National Compact Stellarator Experiment's (NCSX) modular coils presented a number of engineering and manufacturing challenges due to their complex shapes, requirements for high dimensional accuracy and high current density requirements due to space constraints. Being the first of their kind, these coils required the implementation of many new manufacturing and measuring techniques and procedures. This was the first time that these manufacturing techniques and methods were applied in the production of coils at the laboratory. This resulted in a steep learning curve for the first several coils. Through the effective use of procedures, tooling modifications, involvement and ownership by the manufacturing workforce, and an emphasis on safety, the assembly team was able to reduce the manufacturing times and improve upon the manufacturing methods. This paper will discuss the learning curve and steps that were taken to improve the manufacturing efficiency and reduce the manufacturing times for the modular coils without forfeiting quality.

James H. Chrzanowski,Thomas G. Meighan, Steven Raftopoulos and Lawrence Dudek and Paul J. Fogarty

2009-09-15T23:59:59.000Z

289

Response to Notice of Inquiry: Technology Transfer Practices at DOE  

Broader source: Energy.gov (indexed) [DOE]

Response to Notice of Inquiry: Technology Transfer Practices at DOE Response to Notice of Inquiry: Technology Transfer Practices at DOE Laboratories (73 FR 2036) by Batelle Energy Alliance, LLC. Response to Notice of Inquiry: Technology Transfer Practices at DOE Laboratories (73 FR 2036) by Batelle Energy Alliance, LLC. Response to Notice of Inquiry: Technology Transfer Practices at DOE Laboratories (73 FR 2036) by Batelle Energy Alliance, LLC. This letter includes the BEA response (the contractor for Idaho National Laboratory) to the DOE's inquiry regarding suggestions for its Technology Transfer Practices. Recommended improvements include: more flexible transactional agreements to meet the diverse needs of interested parties, more support for commercial investors considering higher risk technologies, the removal of some of the U.S. manufacturing requirements, and more rights

290

Cost Effective Cooling Strategies for Manufacturing Facilities  

E-Print Network [OSTI]

Industrial plants are designed for a specific purpose of manufacturing products or a group of products in the most cost effective way. One factor which is often very poorly addressed is the environmental requirements for the workplace. Environmental...

Kumar, R.

291

Laser Technology: Additive Manufacturing  

Science Journals Connector (OSTI)

Selective Laser Sintering, and in general Additive Manufacturing Processes are becoming mature technologies; in the ... systems that are even utilized for direct parts manufacturing. However, the parts final user...

Srichand Hinduja; Lin Li

2013-01-01T23:59:59.000Z

292

The Advanced Manufacturing Partnership  

E-Print Network [OSTI]

;ve Manufacturing Technologies (led by Dow, Honeywell and MIT) Manufacturing Ins;tutes (led, Honeywell and MIT GOALS § To launch public-private ini:a:ves to advance transforma

Das, Suman

293

Non-Contact Sensor Evaluation for Bipolar Plate Manufacturing Process Control and Smart Assembly of Fuel Cell Stacks - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 4 DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report Eric Stanfield National Institute of Standards and Technology 100 Bureau Dr., MS 8211-8211 Gaithersburg, MD 20899 Phone: (301) 975-4882 Email: eric.stanfield@nist.gov DOE Managers HQ: Nancy Garland Phone: (202) 586-5673 Email: Nancy.Garland@ee.doe.gov GO: Jesse Adams Phone: (720) 356-1421 Email: Jesse.Adams@go.doe.gov Contract Number: DE-EE0001047 Project Start Date: October 1, 2009

294

2009 Solid-State Lighting Vancouver Manufacturing Workshop Highlights  

Broader source: Energy.gov [DOE]

Well over 150 lighting industry leaders gathered in Vancouver, Washington, on June 24-25, 2009, for the second DOE Solid-State Lighting (SSL) Manufacturing Workshop. The primary purpose was to review and refine a "strawman" roadmap for SSL manufacturing, based on insights and recommendations from the first workshop, which was held in April in Fairfax, Virginia. These insights and recommendations focused on identifying and overcoming the key barriers to developing lower-cost, higher-quality SSL products. The outcome of both workshops will be a working roadmap to guide SSL manufacturing in general and to inform a new DOE manufacturing initiative.

295

Manufacturing Innovation Topics Workshop  

Broader source: Energy.gov [DOE]

The Advanced Manufacturing Office (AMO) and the Office of the Secretary of Defense Manufacturing Technology Program (OSD ManTech) will host a workshop to discuss AMO's recent Request for Information (RFI) on Clean Energy Manufacturing Topic Areas as well as the recent areas of interest announced by OSD ManTech for a new Manufacturing Innovation Institute on October 8-9, 2014 in Fort Worth, TX.

296

Manufacturing Industrial Development for the Alternative Energy Systems-Final Report  

SciTech Connect (OSTI)

NCMS identified and developed critical manufacturing technology assessments vital to the affordable manufacturing of alternative-energy systems. NCMS leveraged technologies from other industrial sectors and worked with our extensive member organizations to provide DOE with two projects with far-reaching impact on the generation of wind energy. In the response for a call for project ideas, 26 project teams submitted ideas. Following a detailed selection criteria, two projects were chosen for development: Advanced Manufacturing for Modular Electro-kinetic (E-K) Wind Energy Conversion Technology - The goal of this project was to demonstrate that a modular wind energy technology based on electrohydrodynamic wind energy principles and employing automotive heritage high volume manufacturing techniques and modular platform design concepts can result in significant cost reductions for wind energy systems at a range of sizes from 100KW to multi-MW. During this program, the Accio/Boeing team made major progress on validating the EHD wind energy technology as commercially viable in the wind energy sector, and moved along the manufacturing readiness axis with a series of design changes that increased net system output. Hybrid Laser Arc Welding for Manufacture of Wind Towers - The goal of this research program was to reduce the cost of manufacturing wind towers through the introduction of hybrid laser arc welding (HLAW) into the supply chain for manufacturing wind towers. HLAW has the potential to enhance productivity while reducing energy consumption to offset the foreign low-cost labor advantage and thereby enhance U.S. competitiveness. HLAW technology combines laser welding and arc welding to produce an energy efficient, high productivity, welding process for heavy manufacturing. This process leverages the ability of a laser to produce deep weld penetration and the ability of gas metal arc welding (GMAW) to deposit filler material, thereby producing stable, high quality, welds on joints with gaps and mismatches typical of those seen in heavy manufacturing. Wind towers utilize varying thicknesses of steel throughout their structures to meet the mechanical load requirements while keeping material costs low. A typical tower might have as many as twelve different material thicknesses. Joining each thickness requires a unique joint design and welding approach to enable the management of quality, productivity, and mechanical properties. In this program, laser joining of materials with thicknesses ranging from 12mm to 35mm were evaluated against the standard quality and mechanical requirements for General Electric wind tower components. The joining processes demonstrated showed the ability to meet key requirements with the appropriate process controls in place.

Dr. Chuck Ryan, National Center for Manufacturing Sciences; Dr. Dawn White, Accio Energy; Mr. Duncan Pratt, General Electric Global Research

2013-01-30T23:59:59.000Z

297

Energy-Efficient Manufactured Homes | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufactured Homes Manufactured Homes Energy-Efficient Manufactured Homes June 24, 2013 - 10:20am Addthis There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje What does this mean for me? Manufactured homes (formerly called mobile homes) mean affordable housing for many Americans. Newer manufactured homes offer amenities found in site-built homes, and can be retrofitted to improve energy efficiency and incorporate renewable energy technologies. Like site-built homes, new manufactured homes (formerly known as mobile homes) can be designed for energy efficiency and renewable energy. You can

298

Clean Energy Manufacturing Resources - Technology Full-Scale Production |  

Broader source: Energy.gov (indexed) [DOE]

Full-Scale Production Full-Scale Production Clean Energy Manufacturing Resources - Technology Full-Scale Production Clean Energy Manufacturing Resources - Technology Full-Scale Production Find resources to help you design a production and manufacturing process for a new clean energy technology or product. For full-scale production, other areas to consider include workforce development; R&D funding; and regional, state, and local resources. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Design Production and Manufacturing Process Advanced Research Projects Agency: Tech-to-Market Resources - general tech-to-market (T2M) resources. DOE Advanced Manufacturing Office: Manufacturing Demonstration Facility - a collaborative manufacturing community that works to provide real data to

299

Energy-Efficient Manufactured Homes | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufactured Homes Manufactured Homes Energy-Efficient Manufactured Homes June 24, 2013 - 10:20am Addthis There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje What does this mean for me? Manufactured homes (formerly called mobile homes) mean affordable housing for many Americans. Newer manufactured homes offer amenities found in site-built homes, and can be retrofitted to improve energy efficiency and incorporate renewable energy technologies. Like site-built homes, new manufactured homes (formerly known as mobile homes) can be designed for energy efficiency and renewable energy. You can

300

The Fe-type nitrile hydratase from Comamonas testosteroni Ni1 does not require an activator accessory protein for expression in Escherichia coli  

SciTech Connect (OSTI)

We report herein the functional expression of an Fe-type nitrile hydratase (NHase) without the co-expression of an activator protein or the Escherichia coli chaperone proteins GroES/EL. Soluble protein was obtained when the {alpha}- and {beta}-subunit genes of the Fe-type NHase Comamonas testosteroni Ni1 (CtNHase) were synthesized with optimized E. coli codon usage and co-expressed. As a control, the Fe-type NHase from Rhodococcus equi TG328-2 (ReNHase) was expressed with (ReNHase{sup +Act}) and without (ReNHase{sup -Act}) its activator protein, establishing that expression of a fully functional, metallated ReNHase enzyme requires the co-expression of its activator protein, similar to all other Fe-type NHase enzymes reported to date, whereas the CtNHase does not. The X-ray crystal structure of CtNHase was determined to 2.4 {angstrom} resolution revealing an {alpha}{beta} heterodimer, similar to other Fe-type NHase enzymes, except for two important differences. First, two His residues reside in the CtNHase active site that are not observed in other Fe-type NHase enzymes and second, the active site Fe(III) ion resides at the bottom of a wide solvent exposed channel. The solvent exposed active site, along with the two active site histidine residues, are hypothesized to play a role in iron incorporation in the absence of an activator protein.

Kuhn, Misty L.; Martinez, Salette; Gumataotao, Natalie; Bornscheuer, Uwe; Liu, Dali; Holz, Richard C. (Loyola); (Greifswald)

2012-10-10T23:59:59.000Z

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

CFL Manufacturers: ENERGY STAR Letters | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

CFL Manufacturers: ENERGY STAR Letters CFL Manufacturers: ENERGY STAR Letters CFL Manufacturers: ENERGY STAR Letters January 25, 2010 DOE issued letters to 25 manufacturers of compact fluorescent lamps (CFLs) involving various models after PEARL Cycle 9 testing indicated that the models do not meet the ENERGY STAR specification and, therefore, are disqualified from the ENERGY STAR Program. When a product is disqualified from the ENERGY STAR Program, all corresponding packaging and supplier's products will be disqualified as well. CFL Manufacturers: ENERGY STAR Letters More Documents & Publications Ex Parte Communication Memo Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative Realizing Building End-Use Efficiency with Ermerging Technologies

302

CFL Manufacturers: ENERGY STAR Letters | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

CFL Manufacturers: ENERGY STAR Letters CFL Manufacturers: ENERGY STAR Letters CFL Manufacturers: ENERGY STAR Letters January 25, 2010 DOE issued letters to 25 manufacturers of compact fluorescent lamps (CFLs) involving various models after PEARL Cycle 9 testing indicated that the models do not meet the ENERGY STAR specification and, therefore, are disqualified from the ENERGY STAR Program. When a product is disqualified from the ENERGY STAR Program, all corresponding packaging and supplier's products will be disqualified as well. CFL Manufacturers: ENERGY STAR Letters More Documents & Publications Ex Parte Communication Memo Realizing Building End-Use Efficiency with Ermerging Technologies Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative

303

Demand Activated Manufacturing Architecture  

SciTech Connect (OSTI)

Honeywell Federal Manufacturing & Technologies (FM&T) engineers John Zimmerman and Tom Bender directed separate projects within this CRADA. This Project Accomplishments Summary contains their reports independently. Zimmerman: In 1998 Honeywell FM&T partnered with the Demand Activated Manufacturing Architecture (DAMA) Cooperative Business Management Program to pilot the Supply Chain Integration Planning Prototype (SCIP). At the time, FM&T was developing an enterprise-wide supply chain management prototype called the Integrated Programmatic Scheduling System (IPSS) to improve the DOE's Nuclear Weapons Complex (NWC) supply chain. In the CRADA partnership, FM&T provided the IPSS technical and business infrastructure as a test bed for SCIP technology, and this would provide FM&T the opportunity to evaluate SCIP as the central schedule engine and decision support tool for IPSS. FM&T agreed to do the bulk of the work for piloting SCIP. In support of that aim, DAMA needed specific DOE Defense Programs opportunities to prove the value of its supply chain architecture and tools. In this partnership, FM&T teamed with Sandia National Labs (SNL), Division 6534, the other DAMA partner and developer of SCIP. FM&T tested SCIP in 1998 and 1999. Testing ended in 1999 when DAMA CRADA funding for FM&T ceased. Before entering the partnership, FM&T discovered that the DAMA SCIP technology had an array of applications in strategic, tactical, and operational planning and scheduling. At the time, FM&T planned to improve its supply chain performance by modernizing the NWC-wide planning and scheduling business processes and tools. The modernization took the form of a distributed client-server planning and scheduling system (IPSS) for planners and schedulers to use throughout the NWC on desktops through an off-the-shelf WEB browser. The planning and scheduling process within the NWC then, and today, is a labor-intensive paper-based method that plans and schedules more than 8,000 shipped parts per month based on more than 50 manually-created document types. The fact that DAMA and FM&T desired to move from paper-based manual architectures to digitally based computer architectures gave further incentive for the partnership to grow. FM&T's greatest strength was its knowledge of NWC-wide scheduling and planning with its role as the NWC leader in manufacturing logistics. DAMA's asset was its new knowledge gained in the research and development of advanced architectures and tools for supply chain management in the textiles industry. These complimentary strengths allowed the two parties to provide both the context and the tools for the pilot. Bender: Honeywell FM&T participated in a four-site supply chain project, also referred to as an Inter-Enterprise Pipeline Evaluation. The MSAD project was selected because it involves four NWC sites: FM&T, Pantex, Los Alamos National Laboratory (LANL), and Lawrence Livermore National Laboratory (LLNL). FM&T had previously participated with Los Alamos National Laboratory in FY98 to model a two-site supply chain project, between FM&T and LANL. Evaluation of a Supply Chain Methodology is a subset of the DAMA project for the AMTEX consortium. LANL organization TSA-7, Enterprise Modeling and Simulation, has been involved in AMTEX and DAMA through development of process models and simulations for LANL, the NWC, and others. The FY 1998 and this FY 1999 projects directly involved collaboration between Honeywell and the Enterprise Modeling and Simulation (TSA-7) and Detonation Science and Technology (DX1) organizations at LANL.

Bender, T.R.; Zimmerman, J.J.

2001-02-07T23:59:59.000Z

304

Low-Cost U.S. Manufacturing of Power Electronics for Electric...  

Broader source: Energy.gov (indexed) [DOE]

Low-Cost U.S. Manufacturing of Power Electronics for Electric Drive Vehicles Low-Cost U.S. Manufacturing of Power Electronics for Electric Drive Vehicles 2010 DOE Vehicle...

305

Study of inkjet printing as additive manufacturing process for gradient polyurethane material  

Science Journals Connector (OSTI)

Reactive inkjet printing as additive manufacturing technique is evaluated for generation of gradient ... . This study does not examine the complete additive manufacturing process to build whole 3D objects but...O...

Marco Mller; Quang-Ut Huynh; Eckart Uhlmann; Manfred H. Wagner

2014-03-01T23:59:59.000Z

306

Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Li-Ion Polymer Battery Cell Manufacturing Plant in USA Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA 2012 DOE Hydrogen and Fuel Cells Program and Vehicle...

307

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit  

Broader source: Energy.gov [DOE]

Presentation on fuel cell manufacturing by Sunita Satyapal at the American Energy and Manufacturing Competitiveness Summit on December 12, 2013.

308

DOE Explosives Safety Manual  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Manual describes DOE's explosives safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives.

1996-03-29T23:59:59.000Z

309

Enabling Manufacturing Research through Interoperability  

E-Print Network [OSTI]

sustainable or environmentally benign manufacturing processes andAND SUSTAINABLE FIGURE 8: LIFE-CYCLE OF MANUFACTURING PROCESSES (

Dornfeld, David; Wright, Paul; Helu, Moneer; Vijayaraghavan, Athulan

2009-01-01T23:59:59.000Z

310

Microsoft Word - Ex Parte Memo re Manufactured Housing  

Broader source: Energy.gov (indexed) [DOE]

May 6, 2013 May 6, 2013 Re Ex Parte Communication On Wednesday May 1, 2013, a group of non-profit and state energy efficiency advocates met with representatives of the Department of Energy to discuss the efficiency standards for Manufactured Housing. See Advanced Notice of Proposed Rulemaking, Energy Efficiency Standards for Manufactured Housing, Docket No. EERE-2009-BT-BC-0021, 75 Fed. Reg. 7556 (Feb. 22, 2010). The efficiency advocates presented information on: a) manufactured homes production, percent of production of manufactured homes that meet energy star standards, and TVA programs to encourage purchase of energy star manufactured homes; b) the need for coordination between DOE and HUD regarding manufactured homes; c) additional information DOE should obtain concerning the impact of air sealing.

311

Goodman Manufacturing: Proposed Penalty (2011-SE-4301) | Department of  

Broader source: Energy.gov (indexed) [DOE]

Proposed Penalty (2011-SE-4301) Proposed Penalty (2011-SE-4301) Goodman Manufacturing: Proposed Penalty (2011-SE-4301) December 2, 2011 DOE alleged in a Notice of Proposed Civil Penalty that Goodman Manufacturing manufactured and distributed noncompliant basic model CPC180* commercial package air conditioners in the U.S. Federal law subjects manufacturers and private labelers to civil penalties if those parties distribute in the U.S. products that do not meet applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Goodman Manufacturing: Proposed Penalty (2011-SE-4301) More Documents & Publications Goodman Manufacturing: Noncompliance Determination (2011-SE-4301)

312

High Pressure Hydrogen Tank Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Workshop Workshop High Pressure Hydrogen Tank Manufacturing Mark Leavitt Quantum Fuel Systems Technologies Worldwide, Inc. August 11, 2011 This presentation does not contain any proprietary, confidential, or otherwise restricted information History of Innovations... Announced breakthrough in all-composite lightweight, high capacity, low-cost fuel storage technologies. * Developed a series of robust, OEM compatible electronic control products. Developed H 2 storage system for SunLine Tran-sit Hythane® bus. Awarded patent for integrated module including in-tank regulator * Developed high efficiency H 2 fuel storage systems for DOE Future Truck programs Developed H 2 storage and metering system for Toyota's FCEV platform. First to certify 10,000 psi systems in Japan

313

2011 NREL/DOE HYDROGEN AND FUEL CELL  

E-Print Network [OSTI]

1 2011 NREL/DOE HYDROGEN AND FUEL CELL MANUFACTURING R................................................................................................................... 3 2.1.1 Hydrogen and Fuel Cell Technologies Overview; Sunita Satyapal..........................................................................23 3.5 Manufacturing Barriers and Needs for Small Fuel Cell Systems with Hydrogen Storage

314

Radiological Protection for DOE Activities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Establishes radiological protection program requirements that, combined with 10 CFR 835 and its associated implementation guidance, form the basis for a comprehensive program for protection of individuals from the hazards of ionizing radiation in controlled areas. Extended by DOE N 441.3. Cancels DOE 5480.11, DOE 5480.15, DOE N 5400.13, DOE N 5480.11; please note: the DOE radiological control manual (DOE/EH-0256T)

1995-09-29T23:59:59.000Z

315

User Requirements Gathered for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Workshops to derive and document each DOE SC Office's HPC requirements for NERSC in 2013-14" * Deliverables: Reports that includes both the HPC requirements and supporting...

316

BES Science Network Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Basic Energy Sciences Network Requirements Workshop Conducted June 4-5, 2007 BES Science Network Requirements Workshop Basic Energy Sciences Program Office, DOE Office of...

317

CIMplementation: Evaluating Manufacturing Automation  

E-Print Network [OSTI]

in the manufacturing organization if CIMplementation~* is to succeed. 1.0 INTRODUCTION There is much discussion today about Com puter Integrated Manufacturing (CIM). Automation tools like Computer Aided Design (CAD) systems, robots, automated material handling...~ Pressing the frontier of technology in one's own manufactur ing facility will not be without its pitfalls. Second, while automation engineers may be able to piece together the technological pieces of a CIM system, they cannot and do not evaluate...

Krakauer, J.

318

A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process  

Science Journals Connector (OSTI)

Abstract Nowadays, due to rapid prototyping processes improvements, a functional metal part can be built directly by Additive Manufacturing. It is now accepted that these new processes can increase productivity while enabling a mass and cost reduction and an increase of the parts functionality. However, the physical phenomena that occur during these processes have a strong impact on the quality of the produced parts. Especially, because the manufacturing paths used to produce the parts lead these physical phenomena, it is essential to considerate them right from the parts design stage. In this context, a new numerical chain based on a new design for Additive Manufacturing (DFAM) methodology is proposed in this paper, the new DFAM methodology being detailed; both design requirements and manufacturing specificities are taken into account. The corresponding numerical tools are detailed in the particular case of thin-walled metal parts manufactured by an Additive Laser Manufacturing (ALM) process.

Remi Ponche; Olivier Kerbrat; Pascal Mognol; Jean-Yves Hascoet

2014-01-01T23:59:59.000Z

319

Upcoming Funding Opportunity for Tower Manufacturing and Installation  

Broader source: Energy.gov [DOE]

The DOE Wind Program has issued a Notice of Intent for a funding opportunity, tentatively titled U.S. Wind Manufacturing: Taller Hub Heights to Access Higher Wind Resources, and Lower Cost of Energy.

320

DOE/EA-1638: Environmental Assessment for the Department of Energy Loan Guarantee to Solyndra, Inc. for Construction of A Photovoltaic Manufacturing Facility and Leasing of an Existing Commercial Facility in Fremont, California (March 2009)  

Broader source: Energy.gov (indexed) [DOE]

38 38 Environmental Assessment FOR DEPARTMENT OF ENERGY LOAN GUARANTEE TO SOLYNDRA, INC. FOR CONSTRUCTION OF A PHOTOVOLTAIC MANUFACTURING FACILITY AND LEASING OF AN EXISTING COMMERCIAL FACILITY IN FREMONT, CALIFORNIA U.S. Department of Energy Loan Guarantee Program Office Washington, DC 20585 March 2009 FINAL ENVIRONMENTAL ASSESSMENT March 2009 Environmental Assessment i Proposed Guarantee of Loan to Solyndra, Inc. TABLE OF CONTENTS Section Page 1. PURPOSE AND NEED..................................................................................................... 1-1 1.1 Purpose of and Need for Action ...................................................................... 1-1 1.2 Background .....................................................................................................

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Manufacturing Success Stories  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Colorado State University Industrial Assessment Center Saves Manufacturers Money and Trains the Next Generation of Engineers http:energy.goveeresuccess-storiesarticles...

322

Acoustics by additive manufacturing:.  

E-Print Network [OSTI]

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance (more)

Setaki, F.

2012-01-01T23:59:59.000Z

323

Contribution to Nanotechnology Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

shares Nano 50 award for directed assembly September 3, 2008 Contribution to Nanotechnology Manufacturing LOS ALAMOS, New Mexico, September 3, 2008-A team of scientists spanning...

324

Manufacturing Demonstration Facility  

Broader source: Energy.gov (indexed) [DOE]

is key to stroke recovery * Additive manufacturing allows custom fit glove device using brain machine interface to retrain movement * Gloves are light-weight, low cost and...

325

Clean Energy Manufacturing Initiative  

Broader source: Energy.gov [DOE]

Manufacturing technologies for cleaner energy generation, distribution, and use represents an important opportunity for U.S. economic growth, energy security, and accelerated innovation. Likewise,...

326

Summit Manufacturing: Noncompliance Determination (2010-SE-0303)  

Broader source: Energy.gov (indexed) [DOE]

the the Matter of: Summit Manufacturing, Inc. Case Number 2010-SE-0303 NOTICE OF NONCOMPLIANCE DETERMINATION CERTIFICATION Manufacturers of certain covered products are required to certify compliance with the applicable energy conservation standards through submission of a compliance statement and a certification report. 10 CFR § 430.62. See 42 U.S.C. 6296 . The compliance statement is a legal statement by the manufacturer that the information provided in its certification reports is true , accurate and complete, that the basic models certified meet the applicable energy conservation standard, that the energy efficiency information report is the result of testing performed in conformance with the applicable test requirements in 10 CFR part 430, subpart B; and that the manufacturer is

327

DOE G 414  

Broader source: Energy.gov (indexed) [DOE]

INITIATED BY: INITIATED BY: http://www.directives.doe.gov Office of Environment, Safety and Health DOE G 414.1-4 Approved 6-17-05 Certified 11-3-10 SAFETY SOFTWARE GUIDE for USE with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance [This Guide describes suggested nonmandatory approaches for meeting requirements. Guides are not requirements documents and are not construed as requirements in any audit or appraisal for compliance with the parent Policy, Order, Notice, or Manual.] U.S. DEPARTMENT OF ENERGY Washington, D.C. NOT MEASUREMENT SENSITIVE DOE G 414.1-4 i (and ii) 6-17-05 FOREWORD This Department of Energy (DOE) Guide is approved by the Office of Environment, Safety and Health and is available for use by all DOE and National Nuclear Security Administration

328

DOE G 414  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

http://www.directives.doe.gov Office of Environment, Safety and Health DOE G 414.1-4 Approved 6-17-05 Certified 11-3-10 SAFETY SOFTWARE GUIDE for USE with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance [This Guide describes suggested nonmandatory approaches for meeting requirements. Guides are not requirements documents and are not construed as requirements in any audit or appraisal for compliance with the parent Policy, Order, Notice, or Manual.] U.S. DEPARTMENT OF ENERGY Washington, D.C. NOT MEASUREMENT SENSITIVE DOE G 414.1-4 i (and ii) 6-17-05 FOREWORD This Department of Energy (DOE) Guide is approved by the Office of Environment, Safety and Health and is available for use by all DOE and National Nuclear Security Administration

329

Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry  

Broader source: Energy.gov [DOE]

Download presentation slides from the DOE Fuel Cell Technologies Office webinar Additive Manufacturing for Fuel Cells held on February 11, 2014.

330

Voluntary Protection Program Onsite Review, Honeywell Federal Manufacturing and Technologies- September 2008  

Broader source: Energy.gov [DOE]

Evaluation to determine whether Honeywell Federal Manufacturing and Technologies / New Mexico is continuing to perform at a level deserving DOE-VPP Star recognition.

331

Voluntary Protection Program Onsite Review, Honeywell Federal Manufacturing and Technologies- November 2008  

Broader source: Energy.gov [DOE]

Evaluation to determine whether Honeywell Federal Manufacturing and Technologies' Kansas City Plant is continuing to perform at a level deserving DOE-VPP Star recognition.

332

Text-Alternative Version: Boston Manufacturing R&D Workshop Video  

Broader source: Energy.gov [DOE]

Following is a text version of Jim Brodrick's welcome presentation video from the April 2011 DOE SSL Manufacturing R&D Workshop in Boston, Massachusetts.

333

Innovative Manufacturing and Materials for Low-Cost Lithium-Ion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Manufacturing and Materials for Low-Cost Lithium-Ion Batteries 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

334

ANNUAL HEATING AND COOLING REQUIREMENTS AND DESIGN DAY PERFORMANCE FOR A RESIDENTIAL MODEL IN SIX CLIMATES: A COMPARISON OF NBSLD, BLAST 2, AND DOE-2.1  

E-Print Network [OSTI]

glass. The thermal resistance is equivalent to a V-value ofequivalent to the DOE-2.1 parameter GLASS-CONDUCTANCE '" 1.39, when the inside film resistance

Carroll, William L.

2011-01-01T23:59:59.000Z

335

Worldwide Energy and Manufacturing USA Inc formerly Worldwide Manufacturing  

Open Energy Info (EERE)

Manufacturing USA Inc formerly Worldwide Manufacturing Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) Place San Bruno, California Zip 94066 Product Worldwide Manufacturing USA is an engineering company based in San Bruno, California. References Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) is a company located in San Bruno, California . References ↑ "Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)"

336

DOE standard: Radiological control  

SciTech Connect (OSTI)

The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

Not Available

1999-07-01T23:59:59.000Z

337

Digital Additive Manufacturing: From Rapid Prototyping to Rapid Manufacturing  

Science Journals Connector (OSTI)

The emergence of stereolithography in 1998 is a milestone for an entirely new class of layer-based manufacturing processes. This new manufacturing approach which allows direct digital manufacturing from CAD to a ...

K. K. B. Hon

2007-01-01T23:59:59.000Z

338

NETL: PPII - Commercial Demonstration of the Manufactured Aggregate  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Demonstration Project Documents - Industrial Applications Demonstration Project Documents - Industrial Applications Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash - Project Brief [PDF-72KB] Universal Aggregates, LLC, King George County, VA PROJECT FACT SHEET Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash [PDF-412KB] (Feb 2008) PROGRAM PUBLICATIONS Final Report Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Absorber Ash [PDF-4.5MB] (Nov 2007) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash: A DOE Assessment [PDF-170KB] (Mar 2008)

339

DOE Announces Tougher Enforcement of Appliance Standards Reporting...  

Broader source: Energy.gov (indexed) [DOE]

energy and cost savings to the American public," said DOE General Counsel Scott Blake Harris. "This 30 day period will provide all manufacturers the same opportunity to submit...

340

NEMA Comments on DOE Reducing Regulatory Burden RFI | Department...  

Broader source: Energy.gov (indexed) [DOE]

Burden RFI NEMA Comments on DOE Reducing Regulatory Burden RFI The National Electrical Manufacturers Association (NEMA) thanks you for the opportunity to provide comments...

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Solid-State Lighting: The Second Annual DOE Solid-State Lighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Second Annual DOE The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop to someone by E-mail Share Solid-State Lighting: The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop on Facebook Tweet about Solid-State Lighting: The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop on Twitter Bookmark Solid-State Lighting: The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop on Google Bookmark Solid-State Lighting: The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop on Delicious Rank Solid-State Lighting: The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop on Digg Find More places to share Solid-State Lighting: The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop on AddThis.com...

342

Solar Manufacturing Technology 2  

Broader source: Energy.gov [DOE]

The PV awards span the supply chain from novel methods to make silicon wafers, to advanced cell and metallization processes, to innovative module packaging and processing. The CSP award demonstrates manufacturability of an innovative CSP reflective-trough receiver. The first round of the SolarMat program was launched in September 2013 supporting five projects. The second round, announced on October 22, 2014, funds ten photovoltaics (PV) and concentrating solar power (CSP) projects that focus on driving down the cost of manufacturing and implementing efficiency-increasing technology in manufacturing processes.

343

Manufactured Home Energy Audit user`s manual  

SciTech Connect (OSTI)

The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

NONE

1997-09-01T23:59:59.000Z

344

Innovative Manufacturing Initiative Project Selections  

Office of Energy Efficiency and Renewable Energy (EERE)

The Department announced nearly $23 million for 12 projects across the country to advance technologies aimed at helping American manufacturers dramatically increase the energy efficiency of their manufacturing facilities, lower costs, and develop new manufacturing technologies.

345

Laser Additive Manufacturing of Metals  

Science Journals Connector (OSTI)

Laser Additive Manufacturing (LAM) is based on a repeating layer wise manufacturing process which uses a laser beam to ... ) geometries into simpler two-dimensional (2D) manufacturing steps [1, 2...]. Thus LAM of...

Claus Emmelmann; Jannis Kranz; Dirk Herzog; Eric Wycisk

2013-01-01T23:59:59.000Z

346

Metal Additive Manufacturing: A Review  

Science Journals Connector (OSTI)

This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, o...

William E. Frazier

2014-06-01T23:59:59.000Z

347

Interim Action Determination Flexible Manufacturing Capability for the Mixed Fuel Fabrication Facility (MFFF)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Flexible Manufacturing Capability for the Mixed Fuel Fabrication Facility (MFFF) Flexible Manufacturing Capability for the Mixed Fuel Fabrication Facility (MFFF) The Department of Energy (DOE) is preparing the Surplus Plutonium Disposition Supplemental Environmental Impact Statement (SPD SEIS), DOE/EIS-0283-S2. DOE is evaluating, among many other things, the environmental impacts of any design and operations changes to the MFFF, which is under construction at the Savannah River Site near Aiken, South Carolina. DOE

348

Interim Action Determination Flexible Manufacturing Capability for the Mixed Fuel Fabrication Facility (MFFF)  

Broader source: Energy.gov (indexed) [DOE]

Flexible Manufacturing Capability for the Mixed Fuel Fabrication Facility (MFFF) Flexible Manufacturing Capability for the Mixed Fuel Fabrication Facility (MFFF) The Department of Energy (DOE) is preparing the Surplus Plutonium Disposition Supplemental Environmental Impact Statement (SPD SEIS), DOE/EIS-0283-S2. DOE is evaluating, among many other things, the environmental impacts of any design and operations changes to the MFFF, which is under construction at the Savannah River Site near Aiken, South Carolina. DOE

349

Beryllium Manufacturing Processes  

SciTech Connect (OSTI)

This report is one of a number of reports that will be combined into a handbook on beryllium. Each report covers a specific topic. To-date, the following reports have been published: (1) Consolidation and Grades of Beryllium; (2) Mechanical Properties of Beryllium and the Factors Affecting these Properties; (3) Corrosion and Corrosion Protection of Beryllium; (4) Joining of Beryllium; (5) Atomic, Crystal, Elastic, Thermal, Nuclear, and other Properties of Beryllium; and (6) Beryllium Coating (Deposition) Processes and the Influence of Processing Parameters on Properties and Microstructure. The conventional method of using ingot-cast material is unsuitable for manufacturing a beryllium product. Beryllium is a highly reactive metal with a high melting point, making it susceptible to react with mold-wall materials forming beryllium compounds (BeO, etc.) that become entrapped in the solidified metal. In addition, the grain size is excessively large, being 50 to 100 {micro}m in diameter, while grain sizes of 15 {micro}m or less are required to meet acceptable strength and ductility requirements. Attempts at refining the as-cast-grain size have been unsuccessful. Because of the large grain size and limited slip systems, the casting will invariably crack during a hot-working step, which is an important step in the microstructural-refining process. The high reactivity of beryllium together with its high viscosity (even with substantial superheat) also makes it an unsuitable candidate for precision casting. In order to overcome these problems, alternative methods have been developed for the manufacturing of beryllium. The vast majority of these methods involve the use of beryllium powders. The powders are consolidated under pressure in vacuum at an elevated temperature to produce vacuum hot-pressed (VHP) blocks and vacuum hot-isostatic-pressed (HIP) forms and billets. The blocks (typically cylindrical), which are produced over a wide range of sizes (up to 183 cm dia. by 61 cm high), may be cut or machined into parts or be thermomechanically processed to develop the desired microstructure, properties, and shapes. Vacuum hot-isostatic pressing and cold-isostatic pressing (CIP) followed by sintering and possibly by a final HIP'ing (CIP/Sinter/HIP) are important in their use for the production of near net-shaped parts. For the same starting powder, a HIP'ed product will have less anisotropy than that obtained for a VHP'ed product. A schematic presentation illustrating the difference between VHP'ing and HIP'ing is shown in Figure I-1. The types of powders and the various beryllium grades produced from the consolidated powders and their ambient-temperature mechanical properties were presented in the consolidation report referred to above. Elevated-temperature properties and the effect of processing variables on mechanical properties are described in the mechanical properties report. Beryllium can also be deposited as coatings as well as freestanding forms. The microstructure, properties, and various methods used that are related to the deposition of beryllium are discussed in the report on beryllium coatings.

Goldberg, A

2006-06-30T23:59:59.000Z

350

Innovations in Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Governor Bill Haslam along with David Danielson, EERE's Assistant Secretary, celebrate the opening of the Carbon Fiber Technology Facility. The 390-ft. long processing line is capable of custom unit operation configuration and has a capacity of up to 25 tons per year, allowing industry to validate conversion of their carbon fiber precursors at semi-production scale. Manufacturing Demonstration Facility Manufacturing Demonstration Facility Processing Technologies Advanced Materials Automation and Controls Brochure News Manufacturing Engineering Advanced Materials & Processes Materials for Aerospace On the cover, plus, read ORNL's feature articles on additive manufacturing and its momentum for aerospace applications.

351

Development of Additive Manufacturing Technology  

Science Journals Connector (OSTI)

Additive Manufacturing (AM) technology came about as a ... of different technology sectors. Like with many manufacturing technologies, improvements in computing power and reduction...

Dr. Ian Gibson; Dr. David W. Rosen

2010-01-01T23:59:59.000Z

352

Additive Manufacturing for Large Products.  

E-Print Network [OSTI]

?? This thesis researches the possibility and feasibility of applying additive manufacturing technology in the manufacturing of propellers. The thesis concerns the production at the (more)

Leirvg, Roar Nelissen

2013-01-01T23:59:59.000Z

353

Sandia National Laboratories: wind manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

manufacturing Wind Energy Manufacturing Lab Helps Engineers Improve Wind Power On November 15, 2011, in Energy, News, Partnership, Renewable Energy, Wind Energy Researchers at the...

354

Department of Energy Announces New Partnerships to Support Manufacturing  

Broader source: Energy.gov (indexed) [DOE]

Partnerships to Support Partnerships to Support Manufacturing Job Training Department of Energy Announces New Partnerships to Support Manufacturing Job Training June 29, 2011 - 12:00am Addthis Washington, D.C. - To complement the Obama Administration's launch last week of the Advanced Manufacturing Partnership, U.S. Secretary of Energy Steven Chu today announced a series of new manufacturing job training partnerships using the Department of Energy's National Training and Education Resource (NTER). DOE will be partnering with the Manufacturing Institute, an affiliate of the National Association of Manufacturers (NAM), the Ford Partnership for Advanced Studies, and Macomb Community College to explore opportunities to provide students with highly interactive and engaging materials in a variety of science, technology, engineering and

355

Changing the Advanced Energy Manufacturing Game in America's Heartland |  

Broader source: Energy.gov (indexed) [DOE]

Changing the Advanced Energy Manufacturing Game in America's Changing the Advanced Energy Manufacturing Game in America's Heartland Changing the Advanced Energy Manufacturing Game in America's Heartland December 16, 2010 - 9:32am Addthis Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs What does this mean for me? Clean energy manufacturing is expanding across the Midwest. This was spurred in large part by the Advanced Energy Manufacturing Tax Credit, also known as 48C, which was part of the Recovery Act. The $2.3 billion in tax credits received by 183 projects is being matched by nearly $5.4 billion in private capital. One of the big reasons we became a global economic leader is because we built things - cars, steel, furniture - you name it, we could build it faster and better than anyone else. In many ways, manufacturing provided

356

Revitalizing Innovation in Michigan for Clean Energy Manufacturing |  

Broader source: Energy.gov (indexed) [DOE]

Revitalizing Innovation in Michigan for Clean Energy Manufacturing Revitalizing Innovation in Michigan for Clean Energy Manufacturing Revitalizing Innovation in Michigan for Clean Energy Manufacturing April 25, 2011 - 4:33pm Addthis Senator Debbie Stabenow at the Revitalizing Innovation in Michigan for Clean Energy Manufacturing Workshop Senator Debbie Stabenow at the Revitalizing Innovation in Michigan for Clean Energy Manufacturing Workshop Kerry Duggan What does this mean for me? Michigan has expanded its manufacturing focus beyond automobiles. Companies across Michigan are producing advanced batteries, motors, controllers, lighting devices, wind machines, photovoltaic modules, and other clean energy products. To create jobs and win the clean energy race, we need to make sure technologies are invented in America and made in America. Last week, I got

357

Changing the Advanced Energy Manufacturing Game in America's Heartland |  

Broader source: Energy.gov (indexed) [DOE]

Advanced Energy Manufacturing Game in America's Advanced Energy Manufacturing Game in America's Heartland Changing the Advanced Energy Manufacturing Game in America's Heartland December 16, 2010 - 9:32am Addthis Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs What does this mean for me? Clean energy manufacturing is expanding across the Midwest. This was spurred in large part by the Advanced Energy Manufacturing Tax Credit, also known as 48C, which was part of the Recovery Act. The $2.3 billion in tax credits received by 183 projects is being matched by nearly $5.4 billion in private capital. One of the big reasons we became a global economic leader is because we built things - cars, steel, furniture - you name it, we could build it faster and better than anyone else. In many ways, manufacturing provided

358

DOE Policy on Decommissioning DOE Facilities Under CERCLA | Department of  

Broader source: Energy.gov (indexed) [DOE]

DOE Policy on Decommissioning DOE Facilities Under DOE Policy on Decommissioning DOE Facilities Under CERCLA DOE Policy on Decommissioning DOE Facilities Under CERCLA In May 1995, the Department of Energy (DOE) issued a policy in collaboration with the Environmental Protection Agency (EPA) for decommissioning surplus DOE facilities consistent with the requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). This policy ensures protection of the environment, worker health and public health, provides opportunities for stakeholder involvement, and achieves risk reduction without unnecessary delay. Consistent with the jointly issued "Guidance on Accelerating CERCLA Environmental Restoration at Federal Facilities" (August 22, 1994), this decommissioning policy encourages streamlined decision-making. This

359

Goodman Manufacturing: Proposed Penalty (2012-CE-1509)  

Broader source: Energy.gov (indexed) [DOE]

Company, Company, L.P. (room air conditioners) ) ) ) ) ) Case Number: 2012-CE-1509 NOTICE OF PROPOSED CIVIL PENALTY Date issued: July 9, 2012 Number of alleged violations: 2920 (365 days, 8 models) Maximum possible assessment: $584,000 Proposed civil penalty: $58,400 The U.S. Department of Energy ("DOE") Office of the General Counsel, Office of Enforcement, alleges that Goodman Manufacturing Company, L.P. ("Goodman") has violated certain provisions of the Energy Policy and Conservation Act, 42 U.S.C. § 6291 et seq. ("the Act"), and 10 C.F.R. § 429.12. Specifically, DOE alleges: I. Goodman has manufactured 1 a variety of Amana brand room air conditioners, including basic models PBC092EOOBXAA, PBC093EOOBXAA, PBCI22EOOBXAA,

360

Climate VISION: Private Sector Initiatives: Automobile Manufacturers:  

Office of Scientific and Technical Information (OSTI)

Federal/State Programs Federal/State Programs ENERGY STAR Focus for Automobile Manufacturing The U.S. automobile manufacturers and EPA have worked together to jointly develop a Focus on energy efficiency within the industry. Participating companies work with EPA to institute or improve their corporate energy management programs and the energy performance of their operations. Through ENERGY STAR, EPA provides tools to gauge plant and program energy performance, a forum for elevating energy management in the industry, and recognition for superior energy achievements. See all Federal/State Programs DOE State Activities For information on activities, financial assistance, and solicitations within your state, please refer to the DOE Office of Energy Efficiency and Renewable Energy State Specific Information website.

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Promulgating Nuclear Safety Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Applies to all Nuclear Safety Requirements Adopted by the Department to Govern the Conduct of its Nuclear Activities. Cancels DOE P 410.1. Canceled by DOE N 251.85.

1996-05-15T23:59:59.000Z

362

Feed tank transfer requirements  

SciTech Connect (OSTI)

This document presents a definition of tank turnover; DOE responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements; records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor for use during Phase 1B.

Freeman-Pollard, J.R.

1998-09-16T23:59:59.000Z

363

DOE Challenge Home Recommended Quality Management Provisions...  

Broader source: Energy.gov (indexed) [DOE]

Quality Management Provisions. qm6-14-13.pdf More Documents & Publications Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) DOE...

364

DOE Information Center  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Information Center DOE Information Center The U.S. Department of Energy (DOE) Information Center provides citizens a consolidated facility to obtain information and records related to the DOE's various programs in Oak Ridge and abroad. Employees at the DOE Information Center are available to assist with your requests and searches from 8:00 a.m. to 5:00 p.m. (EST), Monday through Friday, except for federal holidays. Requests Documents can be requested in person or by telephone, email, or fax. Reproduction Please allow DOE Information Center staff adequate time to reproduce documents. Some material requires special handling, security reviews, etc. Delivery Unless special arrangements have been made with DOE Information Center staff, documents should be picked up during normal business hours.

365

DOE Explosives Safety Manual  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Manual describes the Departments explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. Cancels DOE M 440.1-1. Canceled by DOE O 440.1B Chg 1.

2006-01-09T23:59:59.000Z

366

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH  

SciTech Connect (OSTI)

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create nine (9) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry FGD technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

Roy Scandrol

2003-10-01T23:59:59.000Z

367

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH  

SciTech Connect (OSTI)

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create eight (8) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry flue gas desulfurization (FGD) technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

Roy Scandrol

2003-04-01T23:59:59.000Z

368

Pushing the Envelope: A Case Study of Building the First Manufactured Home Using Structural Insulated Panels  

SciTech Connect (OSTI)

This paper for the ACEEE Summer Study describes construction of the first manufactured home ever produced from structural insulated panels. The home was built in July 2000 by Champion Enterprises at its Silverton, Oregon, plant. The house was completed on the assembly line in 9 days including a 300-mile road test. The paper examines the design and approval process leading to the project, the manufacturing process and its adjustment to SIPs, and the transportation and energy performance of the house after it was built. PNNL coordinated this project and conducted long-term monitoring on the house. The WSU Energy Program conducted building diagnostics testing once the house was occupied. PNNLs and WSUs involvement was funded by the U.S. DOE Building America Program. The Oregon Office of Energy conducted blower door and duct blaster tests. The completed home was estimated to reduce energy consumption by 50% and to have twice the structural strength required by HUD code for manufactured homes. The demonstration proved that the manufactured home production line could support SIPs production simultaneously with traditional construction and without major modifications, the line work in parallel with SIPs and traditional materials. The project revealed severl possibilities for further improving cost and time savings with SIPs construction, that might translate into increased capacity.

Baechler, Michael C.; Hadley, Donald L.; Sparkman, Ronald; Lubliner, Michael

2002-06-01T23:59:59.000Z

369

Energy Department to Work with National Association of Manufacturers to  

Broader source: Energy.gov (indexed) [DOE]

to Work with National Association of to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency June 12, 2007 - 1:40pm Addthis WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today expanded DOE's work to maximize energy efficiency by increasing cooperation among U.S. industry and energy efficiency experts, through a Memorandum of Understanding (MOU) with the National Association of Manufacturers (NAM). Specifically, this MOU includes a variety of activities, which aim to assist manufacturing facilities in implementing an energy management program; adopt clean, efficient technologies; and achieve continual energy efficiency and intensity reduction improvements. Through

370

Energy Department to Work with National Association of Manufacturers to  

Broader source: Energy.gov (indexed) [DOE]

Energy Department to Work with National Association of Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency June 12, 2007 - 1:40pm Addthis WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today expanded DOE's work to maximize energy efficiency by increasing cooperation among U.S. industry and energy efficiency experts, through a Memorandum of Understanding (MOU) with the National Association of Manufacturers (NAM). Specifically, this MOU includes a variety of activities, which aim to assist manufacturing facilities in implementing an energy management program; adopt clean, efficient technologies; and achieve continual energy efficiency and intensity reduction improvements. Through

371

Vehicle Technologies Office Merit Review 2014: Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries  

Broader source: Energy.gov [DOE]

Presentation given by Optodot Corporation at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about innovative manufacturing...

372

Innovations in Manufacturing  

Science Journals Connector (OSTI)

...competition from steam engines and water...Century ofthe Steam Engine is a classic...of the American System of Manufactures...general-purpose machine tools, interchangeable...spe-cialized machine tools, and were con-fined...note that if the system was con-fined...Nel-son provides an assessment of working conditions...

THOMAS WEISS

1983-05-20T23:59:59.000Z

373

ASCR Science Network Requirements  

E-Print Network [OSTI]

ASCR Science Network Requirements Office of AdvancedScientific Computing Research, DOE Office of ScienceEnergy Sciences Network Gaithersburg, MD April 15 and 16,

Dart, Eli

2010-01-01T23:59:59.000Z

374

Transuranic Waste Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The guide provides criteria for determining if a waste is to be managed in accordance with DOE M 435.1-1, Chapter III, Transuranic Waste Requirements.

1999-07-09T23:59:59.000Z

375

DOE CORPORATE REPORTING  

Broader source: Energy.gov (indexed) [DOE]

7/23/2010 7/23/2010 1 DEPARTMENT OF ENERGY (DOE) CORPORATE REPORTING To ensure projects are effectively managed and delivering on the goals of the American Recovery and Reinvestment Act (Recovery Act), DOE will collect data on project management and execution, risk management, job creation, and key project milestones, in addition to what is required by Section 1512 of the Recovery Act. In most cases, monthly data will be used internally for managerial purposes only, but where DOE does intend to publicize monthly data, it will clearly indicate it to be "preliminary/informal and subject to change." Recipients are required to provide DOE information on, but not limited to, the following issues:

376

DOE Directives | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE Directives DOE Directives DOE Directives Directives are the Department of Energy's primary means to communicate and institutionalize directives and policies and to establish requirements, responsibilities, and procedures for Departmental elements and contractors. DOE O 413.3A - Program and Project Management for the Acquisition of Capital Assets DOE G 413.3-1 - Managing Design and Construction Using Systems Engineering for Use with DOE O 413.3A DOE G 413.3-2 - Quality Assurance Guide for Project Management DOE G 413.3-3 - Safeguards and Security for Program and Project Management DOE G 413.3-8 - Environmental Management (EM) Cleanup Projects DOE G 413.3-9 - U.S. Department of Energy Project Review Guide for Capital Asset Projects DOE G 413.3-10 - Earned Value Management System (EVMS)

377

KLA-Tencor's Inspection Tool Reduces LED Manufacturing Costs  

Broader source: Energy.gov [DOE]

With the help of DOE funding, KLA-Tencor is developing an improved inspection tool for LED manufacturing that promises to significantly increase overall process yields and minimize expensive waste. The power of the inspection tool lies in optical detection techniques coupled with defect source analysis software to statistically correlate front-end geometric anomalies in the substrate to killer defects on the back end of the manufacturing line, which give rise to an undesirable or unusable end product.

378

Manufacturing Consumption of Energy 1991--Combined Consumption and Fuel  

U.S. Energy Information Administration (EIA) Indexed Site

< < Welcome to the U.S. Energy Information Administration's Manufacturing Web Site. If you are having trouble, call 202-586-8800 for help. Return to Energy Information Administration Home Page. Home > Energy Users > Manufacturing > Consumption and Fuel Switching Manufacturing Consumption of Energy 1991 (Combined Consumption and Fuel Switching) Overview Full Report Tables & Spreadsheets This report presents national-level estimates about energy use and consumption in the manufacturing sector as well as manufacturers' fuel-switching capability. Contact: Stephanie.battle@eia.doe.gov Stephanie Battle Director, Energy Consumption Division Phone: (202) 586-7237 Fax: (202) 586-0018 URL: http://www.eia.gov/emeu/mecs/mecs91/consumption/mecs1a.html File Last Modified: May 25, 1996

379

Manufacturing Energy Consumption Survey (MECS) - Residential - U.S. Energy  

Gasoline and Diesel Fuel Update (EIA)

About the MECS About the MECS Survey forms Maps MECS Terminology Archives Features First 2010 Data Press Release 2010 Data Brief Other End Use Surveys Commercial Buildings - CBECS Residential - RECS Transportation DOE Uses MECS Data Manufacturing Energy and Carbon Footprints Associated Analysis Early-release estimates from the 2010 MECS show that energy consumption in the manufacturing sector decreased between 2006 and 2010 MECS 2006-2010 - Release date: March 28, 2012 Energy consumption in the U.S. manufacturing sector fell from 21,098 trillion Btu (tBtu) in 2006 to 19,062 tBtu in 2010, a decline of almost 10 percent, based on preliminary estimates released from the 2010 Manufacturing Energy Consumption Survey (MECS). This decline continues the downward trend in manufacturing energy use since the 1998 MECS report.

380

Tennessee-based IAC Helps Manufacturer Become More Energy Efficient |  

Broader source: Energy.gov (indexed) [DOE]

Tennessee-based IAC Helps Manufacturer Become More Energy Efficient Tennessee-based IAC Helps Manufacturer Become More Energy Efficient Tennessee-based IAC Helps Manufacturer Become More Energy Efficient November 14, 2011 - 12:22pm Addthis April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs What does this mean for me? With 50+ assessments and 500+ total recommendations made, this IAC's recommendations could save the average manufacturer evaluated an average $118,636 in electrical, natural gas, waste and productivity costs. This team has saved FUJIFILM Hunt Chemicals U.S.A facility nearly 1,240,976 kW hours of electricity -- an estimated $39,280 per year! Earlier this month, we brought you the story of Chrome Deposit Corporation, a manufacturer that with the help of the University of Delaware Industrial Assessment Center is saving millions of dollars with

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Manufacturing Energy Consumption Survey (MECS) - Analysis & Projections -  

U.S. Energy Information Administration (EIA) Indexed Site

About the MECS About the MECS Survey forms Maps MECS Terminology Archives Features First 2010 Data Press Release 2010 Data Brief Other End Use Surveys Commercial Buildings - CBECS Residential - RECS Transportation DOE Uses MECS Data Manufacturing Energy and Carbon Footprints Associated Analysis Cost of Natural Gas Used in Manufacturing Sector Has Fallen MECS 2010 - Release date: September 6, 2013 Natural gas has been an important exception to the trend of rising prices for energy sources used by manufacturers. Production of natural gas in the United States increased rapidly beginning in 2007 as a result of resources found in shale formations. That increase in supply has in turn lowered the price of natural gas to manufacturers as well as other consumers. The 36% decrease in the average natural gas price paid by manufacturers

382

Stronger Manufacturers' Energy Efficiency Standards for Residential Air  

Broader source: Energy.gov (indexed) [DOE]

Stronger Manufacturers' Energy Efficiency Standards for Residential Stronger Manufacturers' Energy Efficiency Standards for Residential Air Conditioners Go Into Effect Today Stronger Manufacturers' Energy Efficiency Standards for Residential Air Conditioners Go Into Effect Today January 23, 2006 - 11:09am Addthis WASHINGTON, DC -- To increase the energy efficiency of residential air conditioners, the U.S. Department of Energy (DOE) has issued new manufacturing standards that go into effect today, January 23, 2006, for products manufactured in, or imported into, the United States. "Homeowners who choose to buy more energy-efficient air conditioning systems after today will realize significant savings in their energy bills and greatly reduce their energy use," said Secretary of Energy Samuel W. Bodman. "These new energy efficiency standards are the first of several

383

DOE Order on Quality Assurance  

Broader source: Energy.gov [DOE]

The purpose of this order is to ensure that Department of Energy (DOE), including National Nuclear Security Administration (NNSA), products and services meet or exceed customers requirements and...

384

DOE Cooperative Research and Development Agreements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order establishes policy, requirements, and responsibilities for the oversight, management, and administration of Cooperative Research and Development Agreement (CRADA) activities at DOE facilities. Cancels DOE O 483.1 Admin Chg 1 and DOE M 483.1-1.

2013-11-06T23:59:59.000Z

385

Version Tracking Document for DOE Challenge Homes, National Program...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev....

386

Transformational Manufacturing | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transformational Manufacturing Transformational Manufacturing Argonne's new Advanced Battery Materials Synthesis and Manufacturing R&D Program focuses on scalable process R&D to produce advanced battery materials in sufficient quantity for industrial testing. The U.S. manufacturing industry consumes more than 30 quadrillion Btu of energy per year, directly employs about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and transformational technology to improve the efficiency and competitiveness of domestic manufacturing while reducing its carbon footprint. The lab's efforts concentrate on sustainable manufacturing, applied nanotechnology and distributed energy, with an emphasis on transitioning science discoveries to the market.

387

Manufacturing News | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing News Manufacturing News RSS January 15, 2014 FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute The Obama Administration announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. November 22, 2013 In Cleveland, Alcoa and ArcelorMittal Recognized for Leadership in Energy Efficiency As Part of Obama Administration's Better Plants Program, U.S. Manufacturers Cut Energy Waste and Save Money October 21, 2013 FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency Underscoring President Obama's Climate Action Plan to cut harmful emissions and double energy efficiency, the Energy Department is taking

388

Manufacturing News | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing News Manufacturing News RSS August 3, 2011 Department of Energy Announces Philips Lighting North America as Winner of L Prize Competition Philips Product Delivers on Department's Challenge to Replace Common Light Bulb with Energy-Saving Lighting Alternative August 2, 2011 Department of Energy to Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot Goal SUNPATH Program Will Boost American Competitiveness, Lower Cost of Solar Energy June 29, 2011 Department of Energy Announces New Partnerships to Support Manufacturing Job Training National Training and Education Resource (NTER) Offers Tools to Train Workers June 24, 2011 Department of Energy Announces $120 Million to Support Development of Innovative Manufacturing Processes

389

Full SPP Partnership Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partnership Requirements: Partnership Requirements: ENERGY STAR Partnership for Commercial & Industrial Service and Product Providers (SPP) Eligible Organizations Companies providing energy efficiency services and products to commercial buildings and industrial manufacturing facilities/plants are eligible for the Service and Product Provider (SPP) partnership, but must meet certain requirements as specified below. Types of eligible companies include: architecture, distributor, energy consultant/energy management services, energy improvement contractor, energy information services, energy services company (ESCO), engineering, equipment manufacturer, financial services, on-site energy production services, unregulated energy retailer and marketer, or other supplier of standard energy-efficient products and/or services for commercial buildings and/or

390

President Obama Announces New Public-Private Manufacturing Innovation  

Broader source: Energy.gov (indexed) [DOE]

President Obama Announces New Public-Private Manufacturing President Obama Announces New Public-Private Manufacturing Innovation Institute President Obama Announces New Public-Private Manufacturing Innovation Institute January 15, 2014 - 1:37pm Addthis Today, President Obama will announce the selection of North Carolina State University to lead the Energy Department's manufacturing innovation institute for next generation power electronics. Check out more in a new animated video and blog post from Secretary Moniz and factsheet that highlight the importance of this new technology on our clean energy future. The President today will announce new steps with the private sector to strengthen the manufacturing sector, boost advanced manufacturing, and attract the good paying jobs that a growing middle class requires. The

391

Integration of additive manufacturing process characteristics in a design method  

Science Journals Connector (OSTI)

So as to adapt to an increasingly competitive market, companies need to minimise costs and reduce development time while maintaining high quality. This adaptation requires taking into account all elements of the product life cycle, from needs analysis to manufacturing, at an early stage of design. Because of recent developments, additive manufacturing technologies are now considered as manufacturing processes. The development of a design method suitable to these processes has become a major issue for their development. We have developed a method of Design for Additive Manufacturing (DFAM). This method, based on analysis of topological characteristic of the part studied, is used to evaluate the manufacturability of the part with additive processes. We have also developed an approach to decompose a CAD model that can separate interesting geometries manufactured by additive processes. We tested this method on different test parts, particularly in one area of the medical sector.

Julien Kerninon; Pascal Mognol; Jean-Yves Hascoët

2013-01-01T23:59:59.000Z

392

Role of build orientation in layered manufacturing: a review  

Science Journals Connector (OSTI)

Layered manufacturing, also called rapid prototyping or additive manufacturing is a revolutionary development in the field of manufacturing processes in last two decades. Unlike material removed from a stock in the machining process, layered manufacturing builds the solid volume from a CAD model by successively adding material layer by layer. Since parts are fabricated layer by layer, build orientation plays a critical role in the layered manufacturing process as it can improve part quality in terms of accuracy and surface finish, reduce the support volume required, support contact area and build time. It also affects the part strength and cost of manufacturing. This paper presents review of various strategies developed to decide the optimum part build orientation based on different criteria and related issues. This paper also discusses the effect of build orientation on fabricated parts and future directions to improve part quality by selecting suitable and feasible build orientation.

Mohammad Taufik; Prashant K. Jain

2013-01-01T23:59:59.000Z

393

Design and manufacturing tolerances optimisation with quality loss functions  

Science Journals Connector (OSTI)

The competition in the current world market has forced the manufacturers to produce products with low cost and high quality. Production of high quality products at low cost requires the concurrent optimisation of design and manufacturing tolerances along with quality loss. Tolerance allocation is a design tool for minimising over-all cost of manufacturing, while meeting target levels for quality. Since, in traditional method, the allocation of tolerances is based on designer's own experience, it may significantly affect a product's quality and the resulting manufacturing costs. Hence, in this work, the tolerance allocation problem is formulated as a non-linear integer model by considering both the design and manufacturing tolerances so as to minimise the manufacturing cost and quality loss. Genetic algorithm is employed to solve the model and an example is presented to illustrate the methodology. Results are compared with conventional techniques and the performances are analysed.

P. Muthu; V. Dhanalakshmi; K. Sankaranarayanasamy

2010-01-01T23:59:59.000Z

394

DOE Investigates Possible Air Conditioner Efficiency Violations |  

Broader source: Energy.gov (indexed) [DOE]

Investigates Possible Air Conditioner Efficiency Violations Investigates Possible Air Conditioner Efficiency Violations DOE Investigates Possible Air Conditioner Efficiency Violations February 15, 2012 - 5:13pm Addthis The Department of Energy's Office of Enforcement is committed to its compliance enforcement responsibilities with regard to federal energy conservation standards and ensuring that all those subject to the requirements are treated fairly and equally. Today, the Office of Enforcement issued a series of subpoenas as part of an investigation to determine whether manufacturers of split-system air conditioners are making and distributing in the U.S. condensing units that do not meet the current 13 SEER (Seasonal Energy Efficiency Ratio) federal energy conservation standard, which has been the standard since 2006.

395

DOE - Office of Legacy Management -- Ashtabula  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ohio Ohio Ashtabula, Ohio, Site Other Regulatory Framework ashtabula2013 The Ashtabula, Ohio, Site is a 42.5-acre, privately owned site adjacent to the city of Ashtabula, about 55 miles east of Cleveland. From 1962 to 1988 Reactive Metals, Inc. (RMI) operated a facility on the property that manufactured metallic uranium tubes and rods and experimental quantities of thorium metal for use in the Hanford, Washington; and Savannah River, Georgia, weapons program reactors. RMI also extruded depleted uranium and nonradioactive materials, primarily copper-based, for the private sector. The site has been decontaminated and released for unrestricted use. Responsibility for maintaining records for the Ashtabula site was transferred to DOE's Office of Legacy Management in 2010. The site requires records management and stakeholder support. For more information about the Ashtabula site, view the fact sheet.

396

Climate VISION: Private Sector Initiatives: Automobile Manufacturers:  

Office of Scientific and Technical Information (OSTI)

Resources & Links Resources & Links Software Tools DOE BestPractices Software Tools DOE BestPractices offers a range of software tools and databases that help manufacturers assess their plant's steam, compressed air, motor, and process heating systems. DOE Plant Energy Profiler Industry experience has shown that many plant utility personnel do not have an adequate understanding of their energy cost structure and where the major focus should be for any energy savings program. This tool will address this need and enable an engineer assigned to a plant utility to better understand (a) the cost of all energy sources supplied to the plant, (b) how much energy each individual utility service or energy-consuming equipment consumes, and, (c) where opportunities to realize savings exist.

397

Climate VISION: Private Sector Initiatives: Chemical Manufacturing:  

Office of Scientific and Technical Information (OSTI)

Resources & Links Resources & Links Software Tools Chemical Industry of the Future Tools & Publications The Industrial Technologies Program offers a wide array of publications, videos, software, and other information products for improving energy efficiency in the chemical industry. DOE BestPractices Software Tools DOE BestPractices offers a range of software tools and databases that help manufacturers assess their plant's steam, compressed air, motor, and process heating systems. DOE Plant Energy Profiler Industry experience has shown that many plant utility personnel do not have an adequate understanding of their energy cost structure and where the major focus should be for any energy savings program. This tool will address this need and enable an engineer assigned to a plant utility to

398

Wind Manufacturing Tax Credit | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Wind Manufacturing Tax Credit Wind Manufacturing Tax Credit Wind Manufacturing Tax Credit < Back Eligibility Commercial Industrial Savings Category Wind Buying & Making Electricity Maximum Rebate No specific per project limitation; 100 million limit for all offshore wind tax credits (may be exceeded if EDA deems appropriate) Program Info Start Date 08/19/2010 State New Jersey Program Type Industry Recruitment/Support Rebate Amount 100% of the qualified capital investment Provider New Jersey Economic Development Authority In August 2010 New Jersey enacted legislation ([http://www.njleg.state.nj.us/2010/Bills/AL10/57_.PDF S.B. 2036]) creating an offshore wind resource requirement within the [http://www.dsireusa.org/incentives/incentive.cfm?Incentive_Code=NJ05R&re... state renewables portfolio standard (RPS)] and tax incentives for certain

399

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network [OSTI]

that convert hydrogen into electric energy, (2) hydrogen storage systems, and (3) large-scale hydrogen and prioritize topics for public-private R&D on manufacturing hydrogen storage system components. ScopeManufacturing for the Hydrogen Economy Manufacturing Research & Development of Onboard Hydrogen

400

DOE Hydrogen and Fuel Cells Program: 2012 Annual Progress Report -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing R&D Manufacturing R&D Printable Version 2012 Annual Progress Report VI. Manufacturing R&D This section of the 2012 Annual Progress Report for the DOE Hydrogen and Fuel Cells Program focuses on manufacturing R&D. Manufacturing R&D Sub-Program Overview, Nancy Garland, U.S. Department of Energy Fuel Cell Membrane Electrode Assembly Manufacturing R&D, Michael Ulsh, National Renewable Energy Laboratory Manufacturing of Low-Cost, Durable Membrane Electrode Assemblies Engineered for Rapid Conditioning, Colin Busby, W. L. Gore & Associates, Inc. Adaptive Process Controls and Ultrasonics for High-Temperature PEM MEA Manufacture, Dan Walczyk, Rensselaer Polytechnic Institute Non-Contact Sensor Evaluation for Bipolar Plate Manufacturing Process Control and Smart Assembly of Fuel Cell Stacks, Eric Stanfield,

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Reduction of rework at a large aerospace manufacturer  

E-Print Network [OSTI]

It is an axiom of the manufacturing of any complex product that errors will occur that require repair or discard of said product. In building aircraft, Raptor Aerospace encounters and repairs numerous deviations from the ...

Lieberman, Jeremy A. (Jeremy Alan)

2012-01-01T23:59:59.000Z

402

Gas Turbine Manufacturers Perspective  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Viability and Experience of IGCC From a Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective ASME - IGCC ASME - IGCC Turbo Turbo Expo Expo June 2001 June 2001 GE Power Systems g Klaus Brun, Ph.D. - Manager Process Power Plant Product & Market Development Robert M. Jones - Project Development Manager Process Power Plants Power Systems Power Systems General Electric Company General Electric Company ABSTRACT GE Power Systems g Economic Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective High natural gas fuel gas prices combined with new technology developments have made IGCC a competitive option when compared to conventional combined cycle or coal steam turbine cycles. Although the initial investment costs for an IGCC plant are still comparatively high, the low

403

Fuel Oil Use in Manufacturing  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

of fuel oil relative to other fuels is that manufacturers must maintain large storage tanks. This can prove to be an added expense beyond the price of the fuel. Manufacturers...

404

Finding of No Significant Impact; Energy Efficient Performance Requirements for New Federal Commercial and Residential Buildings (DOE/EA-1463) (1/11/08)  

Broader source: Energy.gov (indexed) [DOE]

7 Federal Register 7 Federal Register / Vol. 73, No. 8 / Friday, January 11, 2008 / Notices Energy; and provide comments and recommendations and priorities for the Department of Energy Annual Plan requirements of the Energy Policy Act of 2005, Subtitle J, Section 999. Tentative Agenda: 7:30 a.m.-8 a.m. Registration 8 a.m.-12 p.m. Welcome & Introductions, Opening Remarks by the Designated Federal Officer, Update Status of the 2007 Program, Overview of 2008 Annual Plan Draft, and Overview of the National Energy Technology Laboratory Complementary Research Program. 12 p.m.-1 p.m. Lunch. 1 p.m.-4 p.m. Committee Discussions. 4 p.m.-4:30 p.m. New Business: Plans for 2008-2010 Federal Advisory Committee. 4:30 p.m.-5 p.m. Public Comments. 5 p.m. Adjourn. Public Participation: The meeting is

405

Materials/manufacturing element of the Advanced Turbine System Program  

SciTech Connect (OSTI)

One of the supporting elements of the Advanced Turbine Systems (ATS) Program is the materials/manufacturing technologies task. The objective of this element is to address critical materials issues for both industrial and utility gas turbines. DOE Oak Ridge Operations Office (ORO) will manage this element of the program, and a team from DOE-ORO and Oak Ridge National Laboratory is coordinating the planning for the materials/manufacturing effort. This paper describes that planning activity which is in the early stages.

Karnitz, M.A.; Devan, J.H.; Holcomb, R.S.; Ferber, M.K.; Harrison, R.W.

1994-08-01T23:59:59.000Z

406

DOE-STD-1077-94  

Broader source: Energy.gov [DOE]

Training Accreditation Program Standard: Requirements and Guidelines Canceled | Supercedes DOE-STD-0101T, TAP-1, and DOE-STD-0103T, TAP-3 The purpose of this Standard is to provide requirements, information, and guidance for the effective implementation of the DOE Training Accreditation Program established by DOE Order 5480.18B, Nuclear Facility Training Accreditation Program.

407

Design for manufacturing (DFM) in submicron VLSI design  

E-Print Network [OSTI]

DESIGN FOR MANUFACTURING (DFM) IN SUBMICRON VLSI DESIGN A Dissertation by KE CAO Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY August 2007 Major... Subject: Computer Engineering DESIGN FOR MANUFACTURING (DFM) IN SUBMICRON VLSI DESIGN A Dissertation by KE CAO Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR...

Cao, Ke

2009-05-15T23:59:59.000Z

408

DOE Online  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fermilab's Science Adventures! Fermilab's Science Adventures! DOE Online K-12 Instructional Resources ed.fnal.gov/doe/ The U.S. Department of Energy is committed to helping educate our nation's next generation of scientists. The following resources help teachers integrate the Internet into K-12 classroom instruction. DOE Labs General Instructional Units Online Resources Lesson Plans General References DOE Laboratory and Facility Education Home Pages (www-ed.fnal.gov/doe/doe_labs.html) Direct links for 27 education Websites at DOE national laboratories and facilities. Online Catalog (www-ed.fnal.gov/trc/library) Fermilab's Teacher Resource Center collection of 10,000+ PreK-12 instructional materials in science, mathematics and technology. Materials include tradebooks, curriculum materials, educational

409

DOE Zero Energy Ready Home Case Study: Southern Homes, Russellville, AL  

Broader source: Energy.gov [DOE]

Case study of the first manufactured home built to the DOE Zero Energy Ready Home standard. This manufactured home achieved a HERS score of 57 without PV. The home has been set up for side-by-side...

410

DOE Zero Energy Ready Home Case Study: Southern Energy Homes, Russellville, AL  

Broader source: Energy.gov [DOE]

Case study of the first manufactured home built to the DOE Zero Energy Ready Home standard. This manufactured home achieved a HERS score of 57 without PV. The home has been set up for side-by-side...

411

Flow Battery System Design for Manufacturability.  

SciTech Connect (OSTI)

Flow battery energy storage systems can support renewable energy generation and increase energy efficiency. But, presently, the costs of flow battery energy storage systems can be a significant barrier for large-scale market penetration. For cost- effective systems to be produced, it is critical to optimize the selection of materials and components simultaneously with the adherence to requirements and manufacturing processes to allow these batteries and their manufacturers to succeed in the market by reducing costs to consumers. This report analyzes performance, safety, and testing requirements derived from applicable regulations as well as commercial and military standards that would apply to a flow battery energy storage system. System components of a zinc-bromine flow battery energy storage system, including the batteries, inverters, and control and monitoring system, are discussed relative to manufacturing. The issues addressed include costs and component availability and lead times. A service and support model including setup, maintenance and transportation is outlined, along with a description of the safety-related features of the example flow battery energy storage system to promote regulatory and environmental, safety, and health compliance in anticipation of scale manufacturing.

Montoya, Tracy Louise; Meacham, Paul Gregory; Perry, David; Broyles, Robin S.; Hickey, Steven; Hernandez, Jacquelynne

2014-10-01T23:59:59.000Z

412

Leveraging Manufacturing for a Sustainable Future  

E-Print Network [OSTI]

2010): Sustainable Manufacturing Greening Processes,processes and systems) can play in creating a sustainablesustainable manufacturing as the creation of manufacturing products that use materials and processes

Dornfeld, David

2011-01-01T23:59:59.000Z

413

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , Sustainable Manufacturing - Greening Processes,Avoid) Increase process efficiency Most sustainable (Improvesustainable manufacturing. 2 They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

414

Sustainable Manufacturing Greening Processes, Systems and Products  

E-Print Network [OSTI]

mittels Sustainable Manufacturing - Greening Processes,Sustainable for manufacturing Manufacturing Cambridge, accessed processes,processes due to energy awareness and environmental consciousness create many opportunities for sustainable

Dornfeld, David

2010-01-01T23:59:59.000Z

415

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , Sustainable Manufacturing Greening Processes, Systemsorimpact low Most sustainable Increaseprocess efficiencysustainable manufacturing [1]. They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

2011-01-01T23:59:59.000Z

416

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

Industry Associations Alliance of Automobile Manufacturers The Alliance of Automobile Manufacturers, Inc. is a trade association composed of 10 car and light truck manufacturers...

417

Precision and Energy Usage for Additive Manufacturing  

E-Print Network [OSTI]

Sustainability of additive manufacturing: measuring theCommittee F42 on Additive Manufacturing Technologies," TheASTM Committee F42 on Additive Manufacturing Technologies. -

Clemon, Lee; Sudradjat, Anton; Jaquez, Maribel; Krishna, Aditya; Rammah, Marwan; Dornfeld, David

2013-01-01T23:59:59.000Z

418

Energy Use in Manufacturing ? 1998 to 2002  

U.S. Energy Information Administration (EIA) Indexed Site

Use in Manufacturing - 1998 to 2002 Energy Use in Manufacturing provides information related to energy consumption changes within the U.S. manufacturing sector between 1998 and...

419

General Responsibilities and Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The material presented in this guide provides suggestions and acceptable ways of implementing DOE M 435.1-1 and should not be viewed as additional or mandatory requirements. The objective of the guide is to ensure that responsible individuals understand what is necessary and acceptable for implementing the requirements of DOE M 435.1-1.

1999-07-09T23:59:59.000Z

420

Integrated Management Requirements mapping  

SciTech Connect (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia`s approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Integrated Management Requirements mapping  

SciTech Connect (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

422

DOE Reg. Burden RFI  

Broader source: Energy.gov (indexed) [DOE]

March 21, 2011 March 21, 2011 Page 1 March 21, 2011 Daniel Cohen, Esq. Office of General Counsel U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 Re: Regulatory Burden RFI Dear Mr. Cohen: These comments are submitted by the Air-Conditioning, Heating and Refrigeration Institute (AHRI) in response to the U.S. Department of Energy's (DOE) notice appearing in the Federal Register on February 3, 2011 requesting information to assist DOE in reviewing existing regulations and in making its regulatory program more effective and less burdensome. AHRI is the trade association representing manufacturers of heating, cooling, water heating, and commercial refrigeration equipment. More than 300 members strong, AHRI is an internationally recognized advocate for the industry, and develops standards for and certifies the performance of

423

Manufacturing Science and Technology: Organizations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machining Operations Machining Operations Machining Services Electronic Fabrication Manufacturing Process Science & Technology Thin Film, Vacuum, & Packaging Organic Materials Ceramic & Glass Meso Manufacturing & Systems Development Visiting Us AMTTP Center Organizational chart Organizations Our Business areas Manufacturing Science and Technology David Plummer, Director Manufacturing Enterprise Joe M. Harris, Senior Manager Machining Operations Mathew Donnelly, Manager Machining Services Daryl Reckaway, Acting Manager Electronic Fabrication Phillip L. Gallegos, Manager Manufacturing Process Science and Technology Mark F. Smith, Senior Manager Thin Film, Vacuum, and Packaging Mark F. Smith, Acting Manager Organic Materials Mike Kelly, Manager Ceramic and Glass Alex Roesler, Manager

424

STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING SYSTEMS FOR  

Broader source: Energy.gov (indexed) [DOE]

19 '96 12:04PM DOE/SF LEGAL OFFICE P.2 19 '96 12:04PM DOE/SF LEGAL OFFICE P.2 * * STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING SYSTEMS FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER LBNL SUBCONTRACT NO. 6443828: DOE WAIVER NO. W(A)-96-027; SAN-670 The Petitioner, Motorola Manufacturing Systems (MMS), has requested an Advance Waiver of the Government's domestic and foreign rights to inventions made under the above cited research and development contract (R&D Contract). The objective of the R&D Contract, which is issued by the Lawrence Berkeley National Laboratory (LBNL) on behalf of DOE's Office of Health and Environmental Research (ER-70), is to provide consulting services to support planning activities toward the eventual creation of a next generation DNA sequencing facility. More

425

Department of Energy Office of Nuclear Safety and Environmental Policy Technical Position NSEP-TP-2007- 1, Technical Position on the Requirement in DOE 0 420.1B to Use National Consensus Industry Standards and the Model Building CodesTechnical Position NS  

Broader source: Energy.gov [DOE]

All new construction required to follow the provisions of Department of Energy(DOE) Order 420. lB, Facility Safety, must comply with national consensus industrystandards and the model building...

426

DOE enforcement program roles and responsibilities: DOE handbook  

SciTech Connect (OSTI)

The Price-Anderson Act provides indemnification to DOE contractors who manage and conduct nuclear activities in the DOE complex. The government acts as an insurer for these contractors against any findings of liability from the nuclear activities of the contractor within the scope of its contract. 10 CFR Part 820 establishes the legal framework for implementing DOE`s Nuclear Safety Enforcement Program. Integration with other DOE organizations and programs would assure that the enforcement process properly considers the actual or potential safety significance of a violation when determining an appropriate enforcement sanction. Achieving a proactive contractor compliance assurance rather than a heavy enforcement hand, will require a foundation of cooperation and teamwork across DOE organizations. This handbook identifies the areas of interface for the DOE Enforcement Program and provides guidance on roles and responsibilities for the key DOE organizational areas. It complements DOE-HDBK-1087-95 and 1089-95.

NONE

1995-08-01T23:59:59.000Z

427

Advanced Manufacturing Office: Motor Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

428

Revolutionizing Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Revolutionizing Manufacturing Revolutionizing Manufacturing Revolutionizing Manufacturing Addthis Saving Energy and Resources 1 of 4 Saving Energy and Resources Thanks to additive manufacturing technology, Oak Ridge National Laboratory was able to fabricate a robotic hand with less energy use and material waste. The novel, lightweight, low-cost fluid powered hand was selected for a 2012 R&D 100 award. | Photo courtesy of Oak Ridge National Laboratory. Partnering with Industry 2 of 4 Partnering with Industry The Energy Department's Manufacturing Demonstration Facility at Oak Ridge National Laboratory includes an array of state-of-the-art additive manufacturing capabilities, allowing researchers and industry to develop innovative manufacturing solutions. | Photo courtesy of Oak Ridge National

429

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Sector Overview 1991-1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 xiii Why Do We Investigate Energy Use in the Manufacturing Sector? What Data Do EIA Use To Investigate Energy Use in the Manufacturing Sector? In 1991, output in the manufactur- ing sector fell as the country went into a recession. After 1991, however, output increased as the country slowly came out of the recession. Between 1991 and 1994, manufacturers, especially manu- facturers of durable goods such as steel and glass, experienced strong growth. The industrial production index for durable goods during the period increased by 21 percent. Real gross domestic product for durable goods increased a corre- sponding 16 percent. The growth of nondurables was not as strong-- the production index increased by only 9 percent during this time period.

430

DOE funds projects on hydrogen storage, fuel cell manufacturing  

Science Journals Connector (OSTI)

Three hydrogen and fuel cell projects in Colorado, California, and New Jersey are to receive funding from the US Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE). The projects are among the recently announced FY 2012 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 3 awards.

2013-01-01T23:59:59.000Z

431

DOE PAGES  

Office of Scientific and Technical Information (OSTI)

a useful reference. Find out more Do you have questions about DOE PAGESBeta content, procedures, or policies? More information is available at OSTI's Public Access Policy page and...

432

DOE News  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DEPARTMENT OF ENERGY SMALL BUSINESS SYMPOSIUM TO LINK LOCAL COMPANIES WITH HANFORD CONTRACTING OPPORTUNITIES RICHLAND, Wash. - The U.S. Department of Energy (DOE) at the Hanford...

433

Faculty Position in Mechanical Engineering Additive Manufacturing  

E-Print Network [OSTI]

Faculty Position in Mechanical Engineering Additive Manufacturing University of Kansas of additive manufacturing. Exceptional candidates with outstanding qualifications could be considered using additive manufacturing in applications such as, but not limited to the net shape manufacture of

434

RELATING MICROSTRUCTURE TO PROCESS VARIABLES IN BEAM-BASED ADDITIVE MANUFACTURING OF INCONEL 718.  

E-Print Network [OSTI]

??The advancement of laser or electron beam-based additive manufacturing requires the ability to control solidification microstructure. Previous work combined analytical point source solutions and nonlinear (more)

Thompson, John Ryan

2014-01-01T23:59:59.000Z

435

Business Sense and Technical Merit: Case Studies on Laser Additive Manufacturing for Aerospace Applications  

Science Journals Connector (OSTI)

Laser additive manufacturing techniques are demonstrated in two case studies to be able to produce aerospace components which meet all technical requirements whilst the cost of...

Wu, Xinhua; Mei, Junfa

436

A screening model to explore planning decisions in automotive manufacturing systems under demand uncertainty  

E-Print Network [OSTI]

Large-scale, complex engineering systems, as for automotive manufacturing, often require significant capital investment and resources for systems configuration. Furthermore, these systems operate in environments that are ...

Yang, Yingxia

2009-01-01T23:59:59.000Z

437

DOE-STD-1030-96 | Department of Energy  

Energy Savers [EERE]

for, Lockouts and Tagouts, Chapter IX of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities DOE-STD-1030-95, DOE Standard Guide...

438

Seminar Title: Additive Manufacturing Advanced Manufacturing of Polymer and Composite Components  

E-Print Network [OSTI]

Seminar Title: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Functionally Integrated Composite Structures, Augsburg, Germany ME Faculty Candidate Abstract: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Additive manufacturing technologies

Wisconsin at Madison, University of

439

Feed tank transfer requirements  

SciTech Connect (OSTI)

This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented.

Freeman-Pollard, J.R.

1998-09-16T23:59:59.000Z

440

Plumbing Manufacturer's Institute Ex Parte Communication Regarding...  

Broader source: Energy.gov (indexed) [DOE]

Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Letter to Department...

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Advanced Technology Vehicles Manufacturing Incentive Program...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles...

442

DOE/EA-1732D  

Broader source: Energy.gov (indexed) [DOE]

32 32 ENVIRONMENTAL ASSESSMENT FOR DEPARTMENT OF ENERGY LOAN TO NEXT AUTOWORKS LOUISIANA, LLC (FORMERLY V-VEHICLE COMPANY), FOR AN ADVANCED TECHNOLOGY GASOLINE VEHICLE MANUFACTURING PROJECT IN MONROE, LOUISIANA U.S. Department of Energy Advanced Technology Vehicles Manufacturing Incentive Loan Program Washington, DC 20585 January 2011 FINAL ENVIRONMENTAL ASSESSMENT i SUMMARY INTRODUCTION The U.S. Department of Energy (DOE) is evaluating whether to issue a loan to Next Autoworks Louisiana, LLC (Next Autoworks Louisiana) - formerly V-Vehicle Company - for the production of an advanced technology gasoline-powered vehicle named the V Car. Next Autoworks Louisiana's project would include the expansion and reequipping of a Monroe, Louisiana manufacturing plant, formerly the

443

Mandatory Supervisory Training Requirements  

Broader source: Energy.gov (indexed) [DOE]

Mandatory Supervisory Training Requirements Mandatory Supervisory Training Requirements All DOE supervisors, managers, and executives will comply with mandatory supervisory training requirements (5 CFR 412; 5 CFR 315.801; 5 CFR 315.901; DOE O 360.1; and DOE O 320.1): * New supervisors: 80 hours of supervisory training, with 40 hours required to be completed during the supervisory probationary period. * Experienced supervisors: minimum of 8 hours of supervisory training each year. The Office of Learning and Workforce Development has developed an inventory of training and developmental activities that will meet the supervisory training requirements. The DOE courses Supervisory Essentials (32 hours) and Navigating the Federal Hiring Process (8 hours) are required to fulfill the first year 40-hour training

444

Department of Energy Workshop High Pressure Hydrogen Tank Manufacturing  

E-Print Network [OSTI]

Department of Energy Workshop High Pressure Hydrogen Tank Manufacturing Mark Leavitt Quantum Fuel for integrated module including in-tank regulator · Developed high efficiency H2 fuel storage systems for DOE tank efficiency, the highest weight efficiency ever demonstrated, in partnership with Lawrence

445

Fact Sheet: Advanced Technology Vehicles Manufacturing Loan Program |  

Broader source: Energy.gov (indexed) [DOE]

Fact Sheet: Advanced Technology Vehicles Manufacturing Loan Program Fact Sheet: Advanced Technology Vehicles Manufacturing Loan Program Fact Sheet: Advanced Technology Vehicles Manufacturing Loan Program November 6, 2008 - 4:47pm Addthis On November 5, 2008, the Department of Energy issued the Interim Final Rule and accomplished writing the rule for Section 136 of EISA 2007 in approximately half of the 60-day expedited timeframe mandated by Congress. Historically, rulemaking at DOE takes 18 months. The Advanced Technology Vehicles Manufacturing Loan Program (ATVMLP) was authorized under Section 136 of the Energy Independence and Security Act of 2007 (P.L. 110-140). Section 136 is under the sole management and responsibility of the Department of Energy. The FY09 Continuing Resolution authorized up to $25 billion in direct loans to eligible applicants for the costs of reequipping,

446

Fact Sheet: Advanced Technology Vehicles Manufacturing Loan Program |  

Broader source: Energy.gov (indexed) [DOE]

Advanced Technology Vehicles Manufacturing Loan Program Advanced Technology Vehicles Manufacturing Loan Program Fact Sheet: Advanced Technology Vehicles Manufacturing Loan Program November 6, 2008 - 4:47pm Addthis On November 5, 2008, the Department of Energy issued the Interim Final Rule and accomplished writing the rule for Section 136 of EISA 2007 in approximately half of the 60-day expedited timeframe mandated by Congress. Historically, rulemaking at DOE takes 18 months. The Advanced Technology Vehicles Manufacturing Loan Program (ATVMLP) was authorized under Section 136 of the Energy Independence and Security Act of 2007 (P.L. 110-140). Section 136 is under the sole management and responsibility of the Department of Energy. The FY09 Continuing Resolution authorized up to $25 billion in direct loans to eligible applicants for the costs of reequipping,

447

Letter Response from the Plumbing Manufacturers Institute (PMI), Docket No.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Response from the Plumbing Manufacturers Institute (PMI), Response from the Plumbing Manufacturers Institute (PMI), Docket No. EERE-2010-BT-NOA-0016 - Notice of Availability of Interpretive Rule on the Applicability of Current Water Conservation Standards for Showerheads Letter Response from the Plumbing Manufacturers Institute (PMI), Docket No. EERE-2010-BT-NOA-0016 - Notice of Availability of Interpretive Rule on the Applicability of Current Water Conservation Standards for Showerheads Letter Response from the Plumbing Manufacturers Institute (PMI), Docket No. EERE-2010-BT-NOA-0016 - Notice of Availability of Interpretive Rule on the Applicability of Current Water Conservation Standards for Showerheads. This is the cover letter to additional comments submitted by PMI after alerting the DOE to its belief that the Interpretive Rule should be subject

448

Pend Oreille PUD - Manufactured Home Rebate Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Pend Oreille PUD - Manufactured Home Rebate Program Pend Oreille PUD - Manufactured Home Rebate Program Pend Oreille PUD - Manufactured Home Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Maximum Rebate $800 Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Up to $800 Provider Pend Oreille PUD Pend Oreille PUD offers cash incentives up to $800 to residential customers who purchase a qualifying energy-efficient manufactured home. Homes must meet Energy Star certification to qualify. All program requirements must be met in order to receive rebate. See the program web site for more information. Other Information Manufactured home must achieve Energy Star certification

449

Method and apparatus for manufacturing gas tags  

DOE Patents [OSTI]

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases.

Gross, Kenny C. (Bolingbrook, IL); Laug, Matthew T. (Idaho Falls, ID)

1996-01-01T23:59:59.000Z

450

Method and apparatus for manufacturing gas tags  

DOE Patents [OSTI]

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases. 4 figs.

Gross, K.C.; Laug, M.T.

1996-12-17T23:59:59.000Z

451

Manufacturing consumption of energy 1994  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

NONE

1997-12-01T23:59:59.000Z

452

DOE Form  

National Nuclear Security Administration (NNSA)

1991) PROJECT: U.S. Department of Energy Requirements Change Notice Baseline List of Required Compliance Documents CONTRACTOR: Babcock & Wilcox Technical Services Y-12, LLC...

453

DOE Form  

National Nuclear Security Administration (NNSA)

11991) PROJECT: U.S. Department of Energy Requirements Change Notice Baseline List of Required Compliance Documents CONTRACTOR: Babcock & Wilcox Technical Services Y-12, LLC...

454

US DOE Hydrogen and Fuel Cell Technology - Composites in H2 Storage...  

Broader source: Energy.gov (indexed) [DOE]

DOE Hydrogen and Fuel Cell Technology - Composites in H 2 Storage & Delivery Fiber Reinforced Polymer Composite Manufacturing Workshop Washington, DC January 13, 2014 Scott...

455

Manufacturing consumption of energy 1991  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

Not Available

1994-12-01T23:59:59.000Z

456

Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D initiative  

Energy Savers [EERE]

Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D initiative 1 of 1 Summary: DOE will launch a collaborative effort with industry to evaluate and scope high- impact...

457

Solid-State Lighting Manufacturing Research and Development Round 4 (DE-FOA-0000792)  

Broader source: Energy.gov [DOE]

Closed Total DOE Funding: $11 million The objective of this Funding Opportunity Announcement (FOA) is to achieve cost reduction of solid-state lighting (SSL) for general illumination through improvements in manufacturing equipment, processes, or techniques.

458

Solid-State Lighting Manufacturing Research and Development Round 3 (DE-FOA-0000561)  

Broader source: Energy.gov [DOE]

Closed Total DOE Funding: $10 million The objective of this Funding Opportunity Announcement (FOA) is achieve cost reduction of solid-state lighting for general illumination through improvements in manufacturing equipment, processes, or techniques.

459

Northwest Energy Efficient Manufactured Housing Program: High Performance Manufactured Home Prototyping and Construction Development  

SciTech Connect (OSTI)

The Building America Partnership for Improved Residential Construction, the Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Housing Program (NEEM) administrator, have been collaborating to conduct research on new specifications that would improve on the energy requirements of a NEEM home. In its role as administrator, NEW administers the technical specs, performs research and engineering analysis, implements ongoing construction quality management procedures, and maintains a central database with home tracking. This project prototyped and assessed the performances of cost-effective high performance building assemblies and mechanical systems that are not commonly deployed in the manufacturing setting. The package of measures is able to reduce energy used for space conditioning, water heating and lighting by 50 percent over typical manufactured homes produced in the northwest.

Hewes, T.; Peeks, B.

2013-11-01T23:59:59.000Z

460

Technology Solutions for New Manufactured Homes: Idaho, Oregon, and Washington Manufactured Home Builders (Fact Sheet)  

SciTech Connect (OSTI)

The Building America Partnership for Improved Residential Construction, the Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Housing Program (NEEM) administrator, have been collaborating to conduct research on new specifications that would improve on the energy requirements of a NEEM home. In its role as administrator, NEW administers the technical specs, performs research and engineering analysis, implements ongoing construction quality management procedures, and maintains a central database with home tracking. This project prototyped and assessed the performances of cost-effective high performance building assemblies and mechanical systems that are not commonly deployed in the manufacturing setting. The package of measures is able to reduce energy used for space conditioning, water heating and lighting by 50 percent over typical manufactured homes produced in the northwest.

Not Available

2013-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Drafts - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

O 452.2E Facility Safety Acquisition Career Management Program Nuclear Explosive and Weapon Surety Program Implementation Guide for Use in Developing Technical Safety...

462

Redelegation Procedures - DOE Directives, Delegations, and Requirement...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Redelegation Procedures by Website Administrator Text version available here. Delegation Procedures Re-Delegation Procedures Document Actions Redelegation Procedures Redelegating...

463

Delegation Procedures - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Delegation Procedures Text Delegation Procedures Delegation Template Text Redelegation Procedures Redelegation Template Delegation Procedures Redelegation Procedures...

464

NERSC/DOE HEP Requirements Workshop Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Modeling for Particle Accelerators November 12, 2009 | Author(s): Lie-Quan Lee | Astrophysical Data Analysis November 12, 2009 | Author(s): Alex Szalay | Astrophysical...

465

Directives - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Analysis 300 Human Resources 400 Work Processes 500 Business and Support Services 1100 Org. Authorities, Functions and Internal Relationships 1200 External...

466

NERSC/DOE BER Requirements Workshop Agenda  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NERSC) 10:15 am - Break 10:30 pm - Case Studies: Climate Science (Lawrence Buja, David Randall, Co-leads) Noon - Working Lunch 1:00 pm - Case Studies: Climate Science, continued...

467

DPC list - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DPC list by Website Administrator PDF document icon DPC list 9-9-14.pdf - PDF document, 390 KB (399650 bytes...

468

Redelegation Template - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Redelegation Template by Website Administrator Microsoft Word Document icon Re-delegation Template Rev3 10-3-11 (1).doc - Microsoft Word Document, 39 KB (40448 bytes)...

469

Delegation Template - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Template by Website Administrator Microsoft Word Document icon delegationtemplate (1).doc - Microsoft Word Document, 39 KB (40448 bytes) Document Actions...

470

NERSC/DOE ASCR Requirements Workshop Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

charge to committee January 5, 2011 | Author(s): Yukiko Sekine | Workshop outline, logistics, format January 5, 2011 | Author(s): Harvey Wasserman | ASCR Program Office Research...

471

NERSC/DOE BER Requirements Meeting Logistics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Logistics Hotel Information Location The workshop was held at the Hilton Washington DCRockville Executive Meeting Center. Address is 1750 Rockville Pike, Rockville, Maryland,...

472

NERSC/DOE HEP Requirements Workshop Logistics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Logistics Workshop Logistics Workshop Location Hilton Washington DCRockville Executive Meeting Center 1750 Rockville Pike Rockville, MD, 20852 The hotel is about 27 miles...

473

NERSC/DOE BER Requirements Workshop Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(high-low) Workshop GoalsOverview May 7, 2009 | Author(s): Yukiko Sekine | Workshop Logistics May 7, 2009 | Author(s): Harvey Wasserman | BER Overview May 7, 2009 | Author(s):...

474

NERSC/DOE BES Requirements Workshop Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Workshop Goals February 9, 2010 | Author(s): Yukiko Sekine | Workshop outline, logistics, format, procedures February 9, 2010 | Author(s): Richard Gerber | BES Program...

475

Justification Memoranda - DOE Directives, Delegations, and Requirement...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Justification Memoranda by Diane Johnson Notice of Intent to Revise Department of Energy Order 350.1, Contractor Human Resources Management Program - by Robert Myers - last...

476

Email Alerts - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Email Alerts by Diane Johnson Use this form to subscribeunsubscribe to email alerts. Please select the type of email alert that you would like to receive. Your Name Please enter...

477

Updates - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Updates by Diane Johnson Email Alerts Subscribe to automatic e-mail notification about updates to the portal. Email Alerts...

478

References - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Regulations (DEAR) CFR Code of Federal Regulations CFR (annual edition) 10 CFR 430 10 CFR 830 10 CFR 835 10 CFR 850 10 CFR 851 Directives Review Board Directives Review Board...

479

NERSC/DOE HEP Requirements Review Participants  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for ASCR Stefan Hoeche SLAC National Accelerator Laboratory Particle physics phenomenology, in particular perturbative QCD and the construction of Monte Carlo event...

480

Opportunities and Barriers in the Implementation of Energy Efficiency Measures in Plastic Manufacturing  

E-Print Network [OSTI]

The plastic industry in the U.S. employs approximately 9% [1] of the manufacturing work force and consumes approximately 6% [1] of the total energy used by the U.S. industries. According to the Department of Energy (DOE), manufacturers of plastic...

Kanunho, A; Yong, J. C.

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "doe requires manufacturer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

High Pressure Hydrogen Tank Manufacturing  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

482

ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Sustainable Nanomaterials Workshop Advanced Manufacturing Office, U.S. Department of Energy Nanocomposite Materials for Lithium-Ion Batteries...

483

Electrolyzer Manufacturing Progress and Challenges  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

484

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

485

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

1 Energy Information AdministrationManufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas...

486

DOE Federal Register Questions  

Broader source: Energy.gov (indexed) [DOE]

COMMENTS-PAGE 1 COMMENTS-PAGE 1 Comments of the Bonneville Power Administration On May 11, the Department of Energy (DOE) issued a Request for Information (RFI) (NBP RFI: Communications Requirements) seeking comments and information from interested parties to assist DOE in understanding the communications requirement of utilities, including, but not limited to, the requirements of the Smart Grid. The RFI also seeks to collect information about electricity infrastructure's current and projected communications requirements, as well as the types of networks and communications services that may be used for grid modernization, including specifically information on what types of communications capabilities utilities think that they will need and what type of communications capabilities the communications carriers think that they can

487

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network [OSTI]

Manufacturing for the Hydrogen Economy Manufacturing Research & Development of PEM Fuel Cell of the hydrogen and fuel cell technologies needed to move the United States toward a future hydrogen economy of a hydrogen energy economy, moving from today's laboratory-scale fabrication technologies to high

488

Cost-effectiveness of conservation upgrades in manufactured homes  

SciTech Connect (OSTI)

This study addresses the costs of upgrading the efficiency of electrically heated manufactured homes in the Bonneville Power Administration's (Bonneville's) service territory. It was prepared by the Battelle Pacific Northwest Laboratory (PNL) for Bonneville under a Related Services Agreement with the US Department of Energy, Contract AC06-76RLO1830. Manufactured homes (commonly called mobile homes) represent a significant lost conservation resource in the region. Manufactured homes are required to meet national energy standards that do not reflect the recent increases in energy prices, and the preemptive nature of the national standards prevents local jurisdictions from establishing stricter requirements. Bonneville has undertaken several programs to analyze the efficiency of manufactured homes and encourage the industry to produce more efficient homes and consumers to increase their demand for efficient units. This study constitutes one portion of Bonneville's overall strategy. 45 refs.

Lee, A.D.; Conner, C.C.; Englin, J.E.; Hadley, D.L.; Lucas, R.G.; Miller, N.E.; Monroe, W.H.

1988-09-01T23:59:59.000Z

489

Rapid manufacturing: impact on supply chain methodologies and practice  

Science Journals Connector (OSTI)

This paper demonstrates the use of Rapid Manufacturing (RM) as the enabling technology for flexible manufacturing in a number of industrial sectors. This paper discusses the evolution of Rapid Prototyping (RP) to RM and the current issues that require further research for the successful integration of this technology within manufacturing companies. The use of RM will have particular impact on supply chain management paradigms such as lean and agile and has particular strategic fit with mass customisation. The effect of RM will have on these paradigms is discussed and confirmed with example cases from automotive production, motor sport and medical devices industries. In conclusion, RM has already been shown in the three cases to offer benefits, particularly where fast reconfiguration of the manufacturing process is required and with the production of customised components.

Christopher Tuck; Richard Hague; Neil Burns

2007-01-01T23:59:59.000Z

490

DOE017-0153  

Broader source: Energy.gov (indexed) [DOE]

5525 5525 DOE017-0153 ,-.or/ N"( - ./,'-'S MaryBeth Zimmerman 02/14/2001 11:08AM / -- T ' ,44 L - ( _w _1_'- _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - .I f . J To: Kenneth Friedman/EE/DOE@DOE, Peggy Podolak/EE/DOE@DOE, Linda Silverman/EE/DOE@DOE, Ed Wall/EE/DOE@DOE, David RodgerslEE/DOE@DOE, Jerry DionlEE/DOE@DOE, Gail McKinley/EE/DOE@DOE. Lawrence MansuetifEE/DOE@DOE cc: John Sullivan/EE/DOE@DOE. Darrell Beschen/EEIDOE@DOE, Michael York/EE/DOE@DOE, Buddy GarlandlEEIDOE@DOE, Nancy Jefferv/EEIDOE@DOE, Joel Rubin/EE/DOE@DOE. Sam Baldwin/EE/DOE@DOE, IEE-ADAS Subject: FW: NEP Draft outline Directions on NEP Assessment paper. Please read all of this very carefully before proceeding: Product Schedule: * Inputs due from sectors to Planning: COB on Thursday (sorry) o Due from EERE to Policy Office: noon on Friday

491

The design of impact absorbing structures for additive manufacture  

Science Journals Connector (OSTI)

Additive manufacturing (AM) is increasingly becoming a viable manufacturing process due to dramatic advantages that it facilitates in the area of design complexity. This paper investigates the potential of additively manufactured lattice structures for the application of tailored impact absorption specifically for conformal body protection. It explores lattice cell types based on foam microstructures and assesses their suitability for impact absorption. The effect of varying the cell strut edge design is also investigated. The implications of scaling these cells up for AM are discussed as well as the design issues regarding the handling of geometric complexity and the requirement for body conformity. The suitability of AM materials for this application is also discussed.

J Brennan-Craddock; D Brackett; R Wildman; R Hague

2012-01-01T23:59:59.000Z

492

DOE PAGES  

Office of Scientific and Technical Information (OSTI)

States Government purposes. (End of Notice) Ref. DEAR970.5227-2 Rights in data-technology transfer DOE-funded authors are free to publish in journals of their choice, including...

493

DOE Continues Aggressive Energy Efficiency Enforcement Effort with Nearly  

Broader source: Energy.gov (indexed) [DOE]

Continues Aggressive Energy Efficiency Enforcement Effort with Continues Aggressive Energy Efficiency Enforcement Effort with Nearly 30 New Proposed Penalties DOE Continues Aggressive Energy Efficiency Enforcement Effort with Nearly 30 New Proposed Penalties September 13, 2010 - 12:00am Addthis Washington, D.C. - As part of an ongoing commitment to rigorously enforce appliance efficiency requirements, the Department of Energy today announced 27 new proposed penalties against companies selling products in the United States without certifying that they comply with energy efficiency or water conservation standards. The legally required certifications help ensure that products sold in the U.S. deliver significant energy and cost savings to the American public. The 27 companies include manufacturers, importers, and private labelers of appliance, plumbing, and lighting products.

494

DOE Annual Site Environmental Reports (ASER)  

Broader source: Energy.gov [DOE]

ASERs are required by DOE O 231.1B. The ASERs provide important information needed by site managers and DOE Headquarters to assess field environmental program performance, site-wide environmental monitoring and surveillance effectiveness, and confirm compliance with environmental standards and requirements. They are also the means by which DOE sites demonstrate compliance with the radiological protection requirements of DOE O 458.1. In addition, ASERs are an important means of conveying DOE's environmental protection performance to stakeholders and members of the public living near DOE sites.

495

STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING SYSTEMS FOR  

Broader source: Energy.gov (indexed) [DOE]

17 '97 12:42PM US DOE OAK LEGAL P.2/12 17 '97 12:42PM US DOE OAK LEGAL P.2/12 ( * STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING SYSTEMS FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER LBNL SUBCONTRACT NO. 6443828-CHANGE ORDER NO. 1; DOE WAIVER NO. W(A)-97-006; SAN-671 The Petitioner, Motorola Manufacturing Systems (MMS), has requested an Advance Waiver of the Government's domestic and foreign rights to inventions made under the above cited Change Order (Contract Modification) to research and development Contract No. 6443828 (R&D Contract). An Advance Waiver W(C)-97-027; SAN- 670 has been granted for the underlying R&D Contract on December 30, 1996. However, that-Advance Waiver was not to be applied "to a modification or extension of the contract where, through such modification or extension, the

496

DOE Approved Technical Standards | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE Technical Standards Program » DOE DOE Technical Standards Program » DOE Approved Technical Standards DOE Approved Technical Standards Document ID Filter Document ID sort ascending Title Date DOE-STD-7501-99 The DOE Corporate Lessons Learned Programs Superseding DOE-STD-7501-95 Including Change Notice No. 1 (September 1997) This technical standard provides management expectations and a framework for the DOE Corporate Lessons Learned Program. The framework is intended to support development and implementation of a DOE-wide lessons learned infrastructure 01/20/2000 DOE-STD-6005-01 Industrial Hygiene Practices This standard recommends industrial hygiene practices to support components of the Worker Protection Program required by Department of Energy (DOE) Order 440.1A, “Worker Protection Management for DOE Federal and Contractor Employees. 04/30/2001

497

Petrick Technology Trends Of Manufacturing  

E-Print Network [OSTI]

#12;323 Petrick Technology Trends chapter 9 The Future Of Manufacturing Irene Petrick Technology Trends This chapter is a story about the future of manufacturing based on three predictions: � that firms sophisticated modeling and simulation of both new products and production processes; � that additive

498

Design for manufacturability Design verification  

E-Print Network [OSTI]

ITRS Design #12;Design · Design for manufacturability · Design verification #12;Design for Manufacturability · Architecture challenges · Logic and circuit challenges · Layout and physical design challenges · Expected to be the source of multiple DFM challenges · Invest in variability reduction or design

Patel, Chintan

499

DOE Energy Challenge Project  

SciTech Connect (OSTI)

Project Objectives: 1. Promote energy efficiency concepts in undergraduate and graduate education. 2. Stimulate and interest in pulp and paper industrial processes, which promote and encourage activities in the area of manufacturing design efficiency. 3. Attract both industrial and media attention. Background and executive Summary: In 1997, the Institute of Paper Science and Technology in conjunction with the U.S. Department of Energy developed a university design competition with an orientation to the Forest Products Industry. This university design competition is in direct alignment with DOEs interests in instilling in undergraduate education the concepts of developing energy efficient processes, minimizing waste, and providing environmental benefits and in maintaining and enhancing the economic competitiveness of the U.S. forest products industry in a global environment. The primary focus of the competition is projects, which are aligned with the existing DOE Agenda 2020 program for the industry and the lines of research being established with the colleges comprising the Pulp and Paper Education and Research Alliance (PPERA). The six design competitions were held annually for the period 1999 through 2004.

Frank Murray; Michael Schaepe

2009-04-24T23:59:59.000Z

500

DOE-STD-3006-2010  

Broader source: Energy.gov [DOE]

Planning and Conducting Readiness Reviews Superseding DOE-STD-3006-2000 (June 2000) This Standard provides standardized methods and approaches for planning and conducting RRs. This Standard also provides guidance for preparation of exemption requests in accordance with DOE O 251.1C. DOE O 425.1D requirements for RRs apply both to responsible contractors and to DOE