National Library of Energy BETA

Sample records for dist no8 maricopa

  1. Electrical Dist No8 Maricopa | Open Energy Information

    Open Energy Info (EERE)

    No8 Maricopa Place: Arizona Phone Number: (602) 254-5908 Website: ieda-az.orgMembers.html Outage Hotline: (602) 254-5908 References: EIA Form EIA-861 Final Data File for 2010 -...

  2. Electrical Dist No7 Maricopa | Open Energy Information

    Open Energy Info (EERE)

    Electrical Dist No7 Maricopa Jump to: navigation, search Name: Electrical Dist No7 Maricopa Place: Arizona Phone Number: 623-935-6253 Outage Hotline: 623-935-6253 References: EIA...

  3. Maricopa County M W C Dist | Open Energy Information

    Open Energy Info (EERE)

    M W C Dist Jump to: navigation, search Name: Maricopa County M W C Dist 1 Place: Arizona References: EIA Form EIA-861 Final Data File for 2010 - File1a1 EIA Form 861 Data...

  4. Maricopa County- Renewable Energy Systems Zoning Ordinance

    Broader source: Energy.gov [DOE]

    The Maricopa County Zoning Ordinance contains provisions for siting renewable energy systems. The ordinance defines renewable energy as "energy derived primarily from sources other than fossil...

  5. Elec District No. 5 Maricopa C | Open Energy Information

    Open Energy Info (EERE)

    District No. 5 Maricopa C Jump to: navigation, search Name: Elec District No. 5 Maricopa C Place: Arizona Phone Number: (480) 610-8741 Outage Hotline: (480) 610-8741 References:...

  6. Kings River Conservation Dist | Open Energy Information

    Open Energy Info (EERE)

    Kings River Conservation Dist Jump to: navigation, search Name: Kings River Conservation Dist Place: California Phone Number: 559-237-5567 Website: www.krcd.org Facebook: https:...

  7. Hohokam Irr & Drain Dist | Open Energy Information

    Open Energy Info (EERE)

    Hohokam Irr & Drain Dist Jump to: navigation, search Name: Hohokam Irr & Drain Dist Place: Arizona Phone Number: (520) 723-7751 Website: hohokamthepowerofchoice.com Outage...

  8. Trinity Public Utilities Dist | Open Energy Information

    Open Energy Info (EERE)

    Public Utilities Dist Jump to: navigation, search Name: Trinity Public Utilities Dist Place: California Website: trinitypud.com Outage Hotline: (530) 623-5536 References: EIA Form...

  9. Maricopa Solar Power Dish Plant | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Maricopa Solar Power Dish Plant This photograph shows the 38-foot mirrored parabolic dish of a SunCatcher. To convert solar thermal energy into grid quality electricity, the ...

  10. Kennebunk Light & Power Dist | Open Energy Information

    Open Energy Info (EERE)

    Kennebunk Light & Power Dist Jump to: navigation, search Name: Kennebunk Light & Power Dist Place: Maine Phone Number: (207) 985-3311 weekdays 7am - 5pm Website: klpd.org...

  11. Roosevelt Public Power Dist | Open Energy Information

    Open Energy Info (EERE)

    Public Power Dist Place: Nebraska Phone Number: 308-635-2424 Website: rooseveltppd.com Facebook: https:www.facebook.compagesRoosevelt-Public-Power-District1389888067908873...

  12. Maricopa Assn. of Governments- PV and Solar Domestic Water Heating Permitting Standards

    Broader source: Energy.gov [DOE]

    In an effort to promote uniformity, the Maricopa Association of Governments (MAG) approved standard procedures for securing necessary electrical/building permits for residential (single-family) and...

  13. Southwest Public Power Dist | Open Energy Information

    Open Energy Info (EERE)

    Public Power Dist Place: Nebraska Phone Number: (308)285-3295 Website: www.swppd.com Twitter: @SWPPD Facebook: https:www.facebook.comSWPPD Outage Hotline: (800)379-7977...

  14. Electrical Dist No5 Pinal Cnty | Open Energy Information

    Open Energy Info (EERE)

    Electrical Dist No5 Pinal Cnty Jump to: navigation, search Name: Electrical Dist No5 Pinal Cnty Place: Arizona Phone Number: (520) 466-7336 Website: www.caidd.com Outage Hotline:...

  15. Polk County Rural Pub Pwr Dist | Open Energy Information

    Open Energy Info (EERE)

    Polk County Rural Pub Pwr Dist Jump to: navigation, search Name: Polk County Rural Pub Pwr Dist Place: Nebraska Phone Number: (888) 242-5265 Website: www.pcrppd.com Outage...

  16. Central Nebraska Pub P&I Dist | Open Energy Information

    Open Energy Info (EERE)

    Pub P&I Dist Jump to: navigation, search Name: Central Nebraska Pub P&I Dist Place: Nebraska Phone Number: 308.995.8601 Website: www.nppd.com Twitter: @nppdnews Facebook: https:...

  17. Van Buren Light & Power Dist | Open Energy Information

    Open Energy Info (EERE)

    Van Buren Light & Power Dist Jump to: navigation, search Name: Van Buren Light & Power Dist Place: Maine Phone Number: (207) 868-3321 Website: www.cmpco.comSuppliersAndPart Outage...

  18. Utilities Dist-Western IN REMC | Open Energy Information

    Open Energy Info (EERE)

    Utilities Dist-Western IN REMC Jump to: navigation, search Name: Utilities Dist-Western IN REMC Place: Indiana References: EIA Form EIA-861 Final Data File for 2010 - File1a1...

  19. Electrical Dist No2 Pinal Cnty | Open Energy Information

    Open Energy Info (EERE)

    No2 Pinal Cnty Jump to: navigation, search Name: Electrical Dist No2 Pinal Cnty Place: Arizona Phone Number: (800) 259-1306 Website: ed2.com Outage Hotline: 800-668-8079...

  20. Electrical Dist No3 Pinal Cnty | Open Energy Information

    Open Energy Info (EERE)

    No3 Pinal Cnty Jump to: navigation, search Name: Electrical Dist No3 Pinal Cnty Abbreviation: ED3 Place: Arizona Phone Number: (520) 424-9021 Website: www.ed3online.org Outage...

  1. Electrical Dist No6 Pinal Cnty | Open Energy Information

    Open Energy Info (EERE)

    No6 Pinal Cnty Jump to: navigation, search Name: Electrical Dist No6 Pinal Cnty Place: Arizona Phone Number: (480) 987-3461 Website: ed-6pinalcounty.com Outage Hotline: (480)...

  2. Electrical Dist No4 Pinal Cnty | Open Energy Information

    Open Energy Info (EERE)

    No4 Pinal Cnty Jump to: navigation, search Name: Electrical Dist No4 Pinal Cnty Place: Arizona Phone Number: (520) 466-7336 Website: www.caidd.com Outage Hotline: (520) 510-9311...

  3. Wellton-Mohawk Irr & Drain Dist | Open Energy Information

    Open Energy Info (EERE)

    & Drain Dist Place: Arizona Phone Number: (928) 785-3351 Website: www.wmidd.orgpower.html Outage Hotline: (928) 785-3351 References: EIA Form EIA-861 Final Data File for 2010 -...

  4. McMullen Valley Water C&D Dist | Open Energy Information

    Open Energy Info (EERE)

    McMullen Valley Water C&D Dist Jump to: navigation, search Name: McMullen Valley Water C&D Dist Place: Arizona Phone Number: 99-928-859-3647 Website: www.harcuvarco.com Outage...

  5. EA-393 Emera Energy Services Subsidiary No. 8 LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Emera Energy Services Subsidiary No. 8 LLC EA-393 Emera Energy Services Subsidiary No. 8 LLC Order authorizing EESS-8 to export electric energy to Canada. EA-393 Emera Energy Svcs EESS-8.pdf (1.09 MB) More Documents & Publications Application to Export Electric Energy OE Docket No. EA-393 Emera Energy Services Subsidiary No. 8 LLC Application to Export Electric Energy OE Docket No. EA-393 Emera Energy Services Subsidiary No. 8

  6. Reevaluation of Stevens sand potential - Maricopa depocenter, southern San Joaquin basin, California

    SciTech Connect (OSTI)

    Kolb, M.M.; Parks, S.L. )

    1991-02-01

    During the upper Miocene in the Southern San Joaquin basin surrounding highlands contributed coarse material to a deep marine basin dominated by fine grained silicious bioclastic deposition. these coarse deposits became reservoirs isolated within the silicious Antelope Shale Member of the Monterey Formation. In the southern Maricopa depocenter these Stevens sands are productive at Yowlumne, Landslide, Aqueduct, Rio Viejo, San Emidio Nose, Paloma, and Midway-Sunset fields, and are major exploration targets in surrounding areas. In the ARCO Fee lands area of the southern Maricopa depocenter, Stevens sands occur as rapidly thickening lens-shaped bodies that formed as channel, levee, and lobe deposits of deep-marine fan systems. These fans were fed from a southerly source, with apparent transport in a north-northwesterly direction. Sands deflect gently around present-day structural highs indicating that growth of structures influenced depositional patterns. Correlations reveal two major fan depositional intervals bounded by regional N, O, and P chert markers. Each interval contains numerous individual fan deposits, with many lobes and channels recognizable on three-dimensional seismic data. In addition to these basinal sand plays presently being evaluated, ARCO is pursuing a relatively new trend on Fee lands along the southern basin margin, where correlation to mountain data reveals Stevens sands trend into the steeply dipping beds of the mountain front. This area, the upturned Stevens,' has large reserve potential and producing analogies at Metson, Leutholtz, Los Lobos, and Pleito Ranch fields.

  7. Chemical characteristics of urban stormwater sediments and implications for environmental management, Maricopa County, Arizona

    SciTech Connect (OSTI)

    Parker, J.T.C.; Fossum, K.D.; Ingersoll, T.L.

    2000-07-01

    Investigations of the chemical characteristics of urban stormwater sediments in the rapidly growing Phoenix metropolitan area of Maricopa County, Arizona, showed that the inorganic component of these sediments generally reflects geologic background values. Some concentrations of metals were above background values, especially cadmium, copper, lead, and zinc, indicating an anthropogenic contribution of these elements to the sediment chemistry. Concentrations, however, were not at levels that would require soil remediation according to guidelines of the US Environmental Protection Agency. Arsenic concentrations generally were above recommended values for remediation at a few sites, but these concentrations seem to reflect geologic rather than anthropogenic factors. Several organochlorine compounds no longer in use were ubiquitous in the Phoenix area, although concentrations generally were low. Chlordane, DDT and its decay products DDE and DDD, dieldrin, toxaphene, and PCBs were found at almost all sites sampled, although some of the pesticides in which these compounds are found have been banned for almost 30 years. A few sites showed exceptionally high concentrations of organochlorine compounds. On the basis of published guidelines, urban stormwater sediments do not appear to constitute a major regional environmental problem with respect to the chemical characteristics investigated here. At individual sites, high concentrations of organic compounds--chlordane, dieldrin, PCBs, and toxaphene--may require some attention. The possible environmental hazard presented by low-level organochlorine contamination is not addresses in this paper; however, high levels of toxicity in urban sediments are difficult to explain. Sediment toxicity varied significantly with time, which indicates that these tests should be evaluated carefully before they are used for management decisions.

  8. Up-grade of process control system, U.S. Steel Fairfield No. 8 blast furnace

    SciTech Connect (OSTI)

    Camlic, R.L. [U.S. Steel, Fairfield, AL (United States). Fairfield Works; Goodman, N.J. [Kvaerner Davy, Pittsburgh, PA (United States)

    1997-12-31

    The No. 8 blast furnace at US Steel`s Fairfield, AL facility is the only blast furnace remaining in operating at the plant. The blast furnace has a production capacity of 5,500 tons per day of hot metal and provides 100% of the iron requirements for the steel plant that has an annual production capacity of 2,200,000 tons of steel. Therefore, any outage on No. 8 blast furnace has a major impact on the operation of the total Fairfield facility. During the planning stages of the latest reline outage of No. 8 blast furnace, significant measures were taken to insure that maximum production of iron was maintained before and immediately after the outage. A significant portion of the reline activity was centered on the total replacement of the existing process control system. The scope of replacement was so extensive that it was determined that if all areas of the process control system were replaced during the reline outage, then the installation and commissioning of the new system would have been the critical path on the project. In addition, the requirements for training and start-up of the new process control system would have imposed risks to obtaining maximum production after the reline outage, as operators experienced the learning curve of the new system. It was therefore decided that the critical areas of the new process control system would be installed before the reline outage. In addition, all training and start-up activities would take place on the new working system while it was operating in a `shadow` mode in parallel with the existing system. This would provide a proven process control system for blast furnace operations before the reline outage, and eliminate the learning curve after the outage. The reline outage is described.

  9. SuperLU{_}DIST: A scalable distributed-memory sparse direct solver for unsymmetric linear systems

    SciTech Connect (OSTI)

    Li, Xiaoye S.; Demmel, James W.

    2002-03-27

    In this paper, we present the main algorithmic features in the software package SuperLU{_}DIST, a distributed-memory sparse direct solver for large sets of linear equations. We give in detail our parallelization strategies, with focus on scalability issues, and demonstrate the parallel performance and scalability on current machines. The solver is based on sparse Gaussian elimination, with an innovative static pivoting strategy proposed earlier by the authors. The main advantage of static pivoting over classical partial pivoting is that it permits a priori determination of data structures and communication pattern for sparse Gaussian elimination, which makes it more scalable on distributed memory machines. Based on this a priori knowledge, we designed highly parallel and scalable algorithms for both LU decomposition and triangular solve and we show that they are suitable for large-scale distributed memory machines.

  10. DOE/EV-0005/29 ORNL-5734 Dist. Category UC-70 Contract No. W-7405-eng-26

    Office of Legacy Management (LM)

    9 ORNL-5734 Dist. Category UC-70 Contract No. W-7405-eng-26 Health and Safety Research Division RADIOLOGICAL SURVEY OF THE FORMER KELLEX RESEARCH FACILITY, JERSEY CITY, NEW JERSEY B. A. Berven W. D. Cottrell H. W. Dickson R. W. Doane W. A. Goldsmith F. F. Haywood W. M. Johnson M. T. Ryan W. H. Shinpaugh Worked performed as part of the Remedial Action Survey and Certification Activities Date Published: February 1982 OAK RIDGE NATIONAL LABORATORY operated by UNION'CARBIDE CORPORATION for the

  11. Assessment of natural radioactivity and associated radiation hazards in some building materials used in Kilpenathur, Tiruvannamalai dist, Tamilnadu, India

    SciTech Connect (OSTI)

    Raghu, Y.; Harikrishnan, N.; Ravisankar, R.; Chandrasekaran, A.

    2015-08-28

    The present study aimed to measure the radioactivity concentration of naturally occuring radionuclides in the locally used building materials from Kilpenthaur, Tiruvannmalai Dist, Tamilnadu, India. This study will also evaluate the radiation hazard arising due to the use of these materials in the construction of dwellings. The concentrations of natural radionuclides {sup 226}Ra, {sup 232}Th and {sup 40}K in five types of building materials have been measured by gamma spectrometry using NaI (Tl) 3” x 3”detector. The estimated radium equivalent activities (Ra{sub eq}), indoor absorbed gamma dose rate (D{sub R}), annual effective dose rate (H{sub R}) and the external hazard indexes(H{sub ex}) were lower than the recommended safe limit and are comparable with results from similar studies conducted in other countries. Therefore, the use of these building material samples under investigation in the construction of dwellings is considered to be safe for inhabitants.

  12. A report on high-level nuclear waste transportation: Prepared pursuant to assembly concurrent resolution No. 8 of the 1987 Nevada Legislature

    SciTech Connect (OSTI)

    1988-12-01

    This report has been prepared by the staff of the State of Nevada Agency for Nuclear Projects/Nuclear Waste Project Office (NWPO) in response to Assembly Concurrent Resolution No. 8 (ACR 8), passed by the Nevada State Legislature in 1987. ACR 8 directed the NWPO, in cooperation with affected local governments and the Legislative committee on High-Level Radioactive Waste, to prepare this report which scrutinizes the US Department of Energy`s (DOE) plans for transportation of high-level radioactive waste to the proposed yucca Mountain repository, which reviews the regulatory structure under which shipments to a repository would be made and which presents NWPO`s plans for addressing high-level radioactive waste transportation issues. The report is divided into three major sections. Section 1.0 provides a review of DOE`s statutory requirements, its repository transportation program and plans, the major policy, programmatic, technical and institutional issues and specific areas of concern for the State of Nevada. Section 2.0 contains a description of the current federal, state and tribal transportation regulatory environment within which nuclear waste is shipped and a discussion of regulatory issues which must be resolved in order for the State to minimize risks and adverse impacts to its citizens. Section 3.0 contains the NWPO plan for the study and management of repository-related transportation. The plan addresses four areas, including policy and program management, regulatory studies, technical reviews and studies and institutional relationships. A fourth section provides recommendations for consideration by State and local officials which would assist the State in meeting the objectives of the plan.

  13. dist_steam.pdf

    Gasoline and Diesel Fuel Update (EIA)

    (toll free) at 1-888-861-0464. For general information about the survey, visit our Web site at http:www.ei a.doe.govemeucbecs. 6. Please use the enclosed self-addre ssed, ...

  14. 1,"Salt River Proj Ag I & P Dist",16572,1999,"Coronado","Silver King",525,"1,3",180,0,"ACSR 2156",1

    U.S. Energy Information Administration (EIA) Indexed Site

    DESTFROM","DESTTO","VOLTAGE","STRUCTYPE","LINEDESIG","LINEOTH","MATERIAL","CIRCUITS" 1,"Salt River Proj Ag I & P Dist",16572,1999,"Coronado","Silver King",525,"1,3",180,0,"ACSR 2156",1 2,"Salt River Proj Ag I & P Dist",16572,1999,"Cholla","Coronado",525,"1,3",73,0,"ACSR 2156",1 3,"Salt River Proj Ag I & P

  15. LLW notes. Volume 11, No.8

    SciTech Connect (OSTI)

    1996-12-01

    `LLW Notes` is distributed by Afton Associates, Inc. to Low-Level Radioactive Waste Forum Participants and other state, and compact officials identified by those Participants to receive `LLW Notes`. The Low-Level Radioactive Waste Forum (LLW Forum) is an association of state and compact representatives, appointed by governors and compact commissions, established to facilitate state and compact implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The LLW Forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  16. Maricopa, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Arizona: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 33.0581063, -112.0476423 Show Map Loading map... "minzoom":false,"mappingservice":"goo...

  17. dist_hot_water.pdf

    Gasoline and Diesel Fuel Update (EIA)

    District Hot Water Usage Form 1999 Commercial Buildings Energy Consumption Survey (CBECS) ... District Hot Water Usage Was district hot water delivered to the building during the ...

  18. Federal Fleet Files, FEMP, Vol. 2, No. 8 - June 2010

    SciTech Connect (OSTI)

    2010-06-10

    June 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  19. The Y-12 Times, Vol. 9, No. 8, August 2009

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B&W Technical Services Y-12, LLC, a partnership between Babcock & Wilcox Technical Services Group Inc. and Bechtel National Inc., operates the Y-12 National Security Complex. ...

  20. Geothermal Progress Monitor report No. 8. Progress report

    SciTech Connect (OSTI)

    Not Available

    1983-11-01

    Geothermal Progress Monitor (GPM) Report Number 8 presents information concerning ongoing technology transfer activities and the mechanisms used to support these activities within geothermal R and D programs. A state-by-state review of major geothermal development activities for the reporting period 1 February 1983 through 31 July 1983 is provided. Recent drilling and exploration efforts and the current status of geothermal electric power plant development in the United States are summarized.

  1. Maricopa County, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    EDGE Energy LLC EGreenIdeas ETA Engineering Ecotality Inc formerly Alchemy Enterprises Limited Ecotality North America formerly eTec Energy Capital Investments First...

  2. Maricopa Assn. of Governments - PV and Solar Domestic Water Heating...

    Broader source: Energy.gov (indexed) [DOE]

    June 18, 2003, MAG passed permit submission requirements for residential solar domestic water heating systems. This is in addition to the existing standards for residential and...

  3. Emerald People's Utility Dist | Open Energy Information

    Open Energy Info (EERE)

    Plant Yes Activity Generation Yes Activity Transmission Yes Activity Wholesale Marketing Yes Activity Retail Marketing Yes This article is a stub. You can help OpenEI by...

  4. Clatskanie Peoples Util Dist | Open Energy Information

    Open Energy Info (EERE)

    Yes Activity Buying Transmission Yes Activity Distribution Yes Activity Wholesale Marketing Yes Activity Retail Marketing Yes This article is a stub. You can help OpenEI by...

  5. Cornhusker Public Power Dist | Open Energy Information

    Open Energy Info (EERE)

    Twitter: @cppd Facebook: https:www.facebook.comcornhuskerppd Outage Hotline: 1-800-955-2773 References: EIA Form EIA-861 Final Data File for 2010 - File1a1 Energy...

  6. Reedy Creek Improvement Dist | Open Energy Information

    Open Energy Info (EERE)

    Generation Yes Activity Buying Transmission Yes Activity Distribution Yes Activity Wholesale Marketing Yes This article is a stub. You can help OpenEI by expanding it. Utility...

  7. HEP-v2-for-dist

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Case S tudy: C on.nuing S tudies o f P lasma B ased Accelerators ( mp113) * PI: W. B. Mori (UCLA) * Presenter: F. S. Tsung (UCLA) Users: W. An, A. Davidson, V. K. Decyk, (UCLA), J. Vieira, L. Silva (IST), W. Lu (UCLA/ Tsinghua) F. S. Tsung, HEP Workshop HEP R equirements: Con.nuing S tudies o f P lasma B ased A ccelerators ( mp113) (PI: W . B . M ori, P resenter: F . S . T sung) An alternate scheme to accelerate particles using plasmas is the Plasma WakeField Accelerator (PWFA) concept where a

  8. Federal Fleet Files, FEMP, Vol. 2, No. 8 - June 2010 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    June 2010 update from the FEMP Federal Fleet Program that outlines vehicle, alternative fuel, infrastructure, and management strategy updates to Federal agencies.

  9. Materials Data on LaH4C4NO8 (SG:14) by Materials Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kristin Persson

    2014-11-02

    Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

  10. Materials Data on LaH4C4NO8 (SG:14) by Materials Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kristin Persson

    Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

  11. OTEC support services. Quarterly technical progress report No. 8, February 15-May 14, 1980

    SciTech Connect (OSTI)

    Lipari, M. V.

    1980-05-01

    Technical engineering and management support services provided by the VSE Corporation for the Ocean Thermal Energy Conversion Program of the Ocean Systems Branch, Division of Central Solar Technology are reported. Tasks include: (1) survey, analysis, evaluation, and recommendation concerning program performance; (2) program technical monitoring; (3) development and implementation of methodology to identify and evaluate program alternatives; (4) technical assessments; (5) OTEC system integration; (6) environment and siting considerations; and (7) transmission subsystem considerations. (WHK)

  12. Materials Data on ZnBP2H4NO8 (SG:2) by Materials Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kristin Persson

    2014-11-02

    Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

  13. Title list of documents made publicly available, August 1--31, 1993. Volume 15, No. 8

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    This document is a monthly publication containing descriptions of information received and generated by the US Nuclear Regulatory commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. The following indexes are included: Personal Author corporate Source, Report Number, and Cross Reference of Enclosures to Principal Documents.

  14. Site characterization progress report: Yucca Mountain, Nevada, October 1, 1992--March 31, 1993, No. 8

    SciTech Connect (OSTI)

    1993-08-01

    In accordance with requirements of Section 113(b)(3) of the Nuclear Waste Policy Act of 1982, as amended, and 10 CFR 60.18(g), the US Department of Energy has prepared this report on the progress of site characterization activities at Yucca Mountain, Nevada, for the period October 1, 1992, through March 31, 1993. This report is the eighth in a series issued at intervals of approximately six months during site characterization of Yucca Mountain as a possible site for a geologic repository for the permanent disposal of high-level radioactive waste. Also included in this report are activities such as public outreach and international programs that are not formally part of the site characterization process. Information on these activities is provided to report on all aspects of the Yucca Mountain studies.

  15. Lincoln County Power Dist No 1 | Open Energy Information

    Open Energy Info (EERE)

    Yes Activity Buying Transmission Yes Activity Distribution Yes Activity Wholesale Marketing Yes Activity Retail Marketing Yes This article is a stub. You can help OpenEI by...

  16. Clay Central Everly School Dist Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Everly School District Energy Purchaser Clay CentralEverly School District Location IA Coordinates 43.1392, -95.2644 Show Map Loading map... "minzoom":false,"mappingservi...

  17. East Bay Municipal Util Dist | Open Energy Information

    Open Energy Info (EERE)

    WECC NERC WECC Yes Operates Generating Plant Yes Activity Generation Yes Activity Wholesale Marketing Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes This article is a stub. You...

  18. SBOT DIST OF COLUMBIA HEADQUARTERS PROCUREMENT POC Michael Raizen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction 236220 Water and Sewer Line and Related ... Other Heavy and Civil Engineering Construction 237990 ... Deep Sea Freight Transportation 483111 Inland Water Freight ...

  19. Northwest Rural Pub Pwr Dist | Open Energy Information

    Open Energy Info (EERE)

    Data Utility Id 13805 Utility Location Yes Ownership P NERC Location WECC NERC MRO Yes RTO SPP Yes Activity Distribution Yes This article is a stub. You can help OpenEI by...

  20. South Central Public Pwr Dist | Open Energy Information

    Open Energy Info (EERE)

    Data Utility Id 17548 Utility Location Yes Ownership P NERC Location MRO NERC MRO Yes RTO SPP Yes Activity Distribution Yes Activity Retail Marketing Yes This article is a stub....

  1. Seward County Rrl Pub Pwr Dist | Open Energy Information

    Open Energy Info (EERE)

    Data Utility Id 16954 Utility Location Yes Ownership P NERC Location SPP NERC SPP Yes RTO SPP Yes Activity Distribution Yes This article is a stub. You can help OpenEI by...

  2. North Central Public Pwr Dist | Open Energy Information

    Open Energy Info (EERE)

    Data Utility Id 13698 Utility Location Yes Ownership P NERC Location MRO NERC MRO Yes RTO SPP Yes Activity Distribution Yes This article is a stub. You can help OpenEI by...

  3. Burt County Public Power Dist | Open Energy Information

    Open Energy Info (EERE)

    NERC Location MRO Activity Transmission Yes Activity Distribution Yes Activity Wholesale Marketing Yes This article is a stub. You can help OpenEI by expanding it. Utility Rate...

  4. EA-2013: Herbicide Application at Three Substations; Imperial County (California), Maricopa and Yuma Counties (Arizona)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Western Area Power Administration (Western) and the Bureau of Land Management (BLM) prepared an EA that analyzes the potential environmental impacts of Western’s proposed use of selected herbicides for the treatment of undesirable vegetation within three existing substations on lands administered by BLM.

  5. Materials Data on CoP4H16(NO8)2 (SG:2) by Materials Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kristin Persson

    2014-11-02

    Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

  6. Materials Data on ZnP4H16(NO8)2 (SG:2) by Materials Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kristin Persson

    2014-11-02

    Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

  7. Materials Data on LaH4C4NO8 (SG:14) by Materials Project (Dataset...

    Office of Scientific and Technical Information (OSTI)

    Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the ...

  8. The Role of the DOE Weapons Laboratories in a Changing National Security Environment: CNSS Papers No. 8, April 1988

    DOE R&D Accomplishments [OSTI]

    Hecker, S. S.

    1988-04-01

    The contributions of the Department of Energy (DOE) nuclear weapons laboratories to the nation's security are reviewed in testimony before the Subcommittee on Procurement and Military Nuclear Systems of the House Armed Services Committee. Also presented are contributions that technology will make in maintaining the strategic balance through deterrence, treaty verification, and a sound nuclear weapons complex as the nation prepares for significant arms control initiatives. The DOE nuclear weapons laboratories can contribute to the broader context of national security, one that recognizes that military strength can be maintained over the long term only if it is built upon the foundations of economic strength and energy security.

  9. Co-firing high sulfur coal with refuse derived fuels. Technical progress report No. 8, July 1996--August 1996

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Riley, J.T.; Lloyd, W.G.

    1996-08-31

    The objective of this study was to examine the possible formation of chlorinated organic compounds during the combustion of blends of refuse derived fuels (RDF) and coal under conditions similar to those of an atmospheric fluidized bed combustion (AFBC) system. A series of experiments were conducted using a TGA interfaced to FTIR. Additional experiments using a tube furnace preheated to AFBC operating temperatures were also conducted. The combustion products were cryogenically trapped and analyzed with a GC/MS system. The chlorination of phenols and the condensation reactions of chlorophenols were investigated in this study. A possible mechanism for the formation of chlorinated organic compounds such as dibenzodioxins and dibenzofurans, by chlorination and condensation reactions involving phenols, was proposed.

  10. Confined zone dispersion flue gas desulfurization demonstration. Quarterly report No. 8, August 17, 1992--November 16, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-09-27

    The CZD process involves injecting a finely atomized slurry of reactive lime into the flue gas duct work of a coal-fired utility boiler. The principle of the confined zone is to form a wet zone of slurry droplets in the middle of the duct confined in an envelope of hot gas between the wet zone and the duct walls. The lime slurry reacts with part of the SO{sub 2} in the gas, and the reaction products dry to form solid particles. A solids collector, typically an electrostatic precipitator (ESP) downstream from the point of injection, captures the reaction products along with the fly ash entrained in the flue gas. The goal of this demonstration is to prove the technical and economic feasibility of the CZD technology on a commercial scale. The process is expected to achieve 50% SO{sub 2} removal at lower capital and O&M costs than other systems. To achieve its objectives, the project is divided into the following three phases: Phase 1: Design and Permitting, Phase 2: Construction and Start-up, Phase 3: Operation and Disposition. Phase 1 activities were completed on January 31, 1991. Phase 2 activities were essentially concluded on July 31, 1991, and Phase 3a, Parametric Testing, was initiated on July 1, 1991. This Quarterly Technical Progress Report covers Phase 3b activities from August 17, 1992 through November 16, 1992.

  11. Mechanisms governing fine particulate emissions from coal flames. Quarterly technical progress report No. 8, July 1, 1989--September 30, 1989

    SciTech Connect (OSTI)

    Newton, G.H.; Schieber, C.; Socha, R.G.; Clark, W.D.; Kramlich, J.C.

    1989-10-01

    During this reporting period the global experiments were concluded. The final activities under these experiments involved measuring mineral content of coals as a function of coal particle size. The principal activities during this quarter involved the mechanistic experiments. Three baseline coals were cleaned and two of these sized. The ash from these various cuts were sampled from a bench scale reactor. The ash size distributions were compared to distributions predicted by the breakup model.

  12. A Solar Win for Arizona | Department of Energy

    Office of Environmental Management (EM)

    The 150 megawatt Mesquite Solar 1 installation in Maricopa County, Arizona. | Photo courtesy of Sempra Energy. The 150 megawatt Mesquite Solar 1 installation in Maricopa County, ...

  13. EA-2013: Herbicide Application at Three Substations; Imperial...

    Office of Environmental Management (EM)

    Imperial County (California), Maricopa and Yuma Counties (Arizona) EA-2013: Herbicide Application at Three Substations; Imperial County (California), Maricopa and Yuma ...

  14. Microsoft Word - CX-AlveyDistWoodPoles_FY13_WEB.docx

    Broader source: Energy.gov (indexed) [DOE]

    engineered organisms, synthetic biology, governmentally designated noxious weeds, or invasive species, unless the proposed activity would be contained or confined in a manner...

  15. EA-1796: Final Environmental Assessment

    Broader source: Energy.gov [DOE]

    Loan Guarantee to Sempra Generation for Construction of the Mesquite Solar Energy Project; Maricopa County, Arizona

  16. Analysis/control of in-bed tube erosion phenomena in the fluidized bed combustion (FBC) system. Technical progress report No. 8, July 1994--September 1994

    SciTech Connect (OSTI)

    Lee, S.W.

    1994-10-01

    This technical report summarizes the research work performed and progress achieved during the period of July 1, 1994 to September 30, 1994. The metal wastage of AISI 1018 low carbon steel at different particle velocity was discussed to understand the erosion phenomena of in-bed tube in FBC system. At both low velocity (2.5 m/s) and high (30 m/s), the maximum metal wastage was occurred at 45{degrees} of impact angle. The erosion rates at low particle velocity were two (2) to three (3) orders of magnitude lower than those at high particle velocity. The characteristics of anti-erosion and design considerations were discussed and suggested for some basic design guidelines, which might be important to the designer of bubbling fluidized combustors. The working principle and mechanism of anti-erosion devices will be discussed. Based upon the understanding of the working principle and mechanism of anti-erosion devices, different types of ant-erosion tube will be designed for the cold model bench-scale FBC system.

  17. Development of advanced NO{sub x} control concepts for coal-fired utility boilers. Quarterly technical progress report No. 8, July 1, 1992--September 30, 1992

    SciTech Connect (OSTI)

    Evans, A.; Pont, J.N.; England, G.; Seeker, W.R.

    1993-03-04

    The complete CombiNO{sub x}, process has now been demonstrated at a level that is believed to be representative of a full-scale boiler in terms of mixing capabilities. A summary of the results is displayed in Figure 5-1. While firing Illinois Coal on the Reburn Tower, Advanced Reburning was capable of reducing NO{sub x}, by 83 percent. The injection of methanol oxidized 50--58 percent of the existing NO to N0{sub 2}. Assuming that 85 percent of the newly formed N0{sub 2} can be scrubbed in a liquor modified wet-limestone scrubber, the CombiNO{sub x}, process has been shown capable of reducing NO{sub 2}, by 90--91 percent in a large pilot-scale coal-fired furnace. There is still uncertainty regarding the fate of the N0{sub 2} formed with methanol injection. Tests should be conducted to determine whether the reconversion is thermodynamic or catalytic, and what steps can be taken (such as quench rate) to prevent it from happening.

  18. DOE/EA-2008: Colorado River Storage Project Programmatic Operations and Maintenance Project; Coconino, Maricopa, Navajo, and Yavapai Counties (Arizona) and San Juan County (Utah)

    Broader source: Energy.gov [DOE]

    Western Area Power Administration is preparing an EA that assesses the potential environmental impacts of Westerns programmatic operations and management (O&M) process and an integrated vegetation management (IVM) program on the Colorado River Storage Project System. O&M activities would consist of aerial and ground patrols, regular and preventive maintenance, inspections and repairs, and road repair. The IVM program would remove vegetation to protect facilities from fire, control the spread of noxious weeds to protect environmental quality, establish and maintain stable, low-growing plant communities in the ROW, and activities for public and worker safety around transmission lines and other facilities.

  19. EA-2008: Colorado River Storage Project Programmatic Operations and Maintenance Project; Coconino, Maricopa, Navajo, and Yavapai Counties (Arizona) and San Juan County (Utah)

    Broader source: Energy.gov [DOE]

    Western Area Power Administration is preparing an EA that assesses the potential environmental impacts of Western’s programmatic operations and management (O&M) process and an integrated vegetation management (IVM) program on the Colorado River Storage Project System. O&M activities would consist of aerial and ground patrols, regular and preventive maintenance, inspections and repairs, and road repair. The IVM program would remove vegetation to protect facilities from fire, control the spread of noxious weeds to protect environmental quality, establish and maintain stable, low-growing plant communities in the ROW, and activities for public and worker safety around transmission lines and other facilities.

  20. EA-2008: Colorado River Storage Project Programmatic Operations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Programmatic Operations and Maintenance Project; Coconino, Maricopa, Navajo, ... EA-2008: Colorado River Storage Project Programmatic Operations and Maintenance Project; ...

  1. Development of the integrated, in-situ remediation technology. Topical report for tasks No. 8 and No. 10 entitled: Laboratory and pilot scale experiments of Lasagna{trademark} process, September 26, 1994--May 25, 1996

    SciTech Connect (OSTI)

    Ho, Sa V.; Athmer, C.J.; Sheridan, P.W.

    1997-04-01

    Contamination in low permeability soils poses a significant technical challenge to in-situ remediation efforts. Poor accessibility to the contaminants and difficulty in delivery of treatment reagents have rendered existing in-situ treatments such as bioremediation, vapor extraction, pump and treat rather ineffective when applied to low permeability soils present at many contaminated sites. This technology is an integrated in-situ treatment in which established geotechnical methods are used to install degradation zones directly in the contaminated W and electro-osmosis is utilized to move the contaminants back and forth through those zones until the treatment is completed. This topical report summarizes the results of the lab and pilot sized Lasagna{trademark} experiments conducted at Monsanto. Experiments were conducted with kaofinite and an actual Paducah soil in units ranging from bench-scale containing kg-quantity of soil to pilot-scale containing about half a ton of soil having various treatment zone configurations. The obtained data support the feasibility of scaling up this technology with respect to electrokinetic parameters as well as removal of organic contaminants. A mathematical model was developed that was successful in predicting the temperature rises in the soil. The information and experience gained from these experiments along with the modeling effort enabled us to successfully design and operate a larger field experiment at a DOE TCE-contaminated clay site.

  2. EO 12866 meeting materials from 2/8 - DOE Distrubtion Transformers...

    Office of Environmental Management (EM)

    PDF icon DOE Dist Trans NOPR ComEd Comments Apr 2012.pdf PDF icon DOE Dist Trans NOPR SA Com Ed Comments Jun 2012.pdf PDF icon DOE Dist Trans Prelim Analysis ComEd Comments ...

  3. EA-2014_FONSI_2015.pdf

    Office of Environmental Management (EM)

    (California), Maricopa and Yuma Counties (Arizona) | Department of Energy 3: Herbicide Application at Three Substations; Imperial County (California), Maricopa and Yuma Counties (Arizona) EA-2013: Herbicide Application at Three Substations; Imperial County (California), Maricopa and Yuma Counties (Arizona) SUMMARY Western Area Power Administration (Western) and the Bureau of Land Management (BLM) prepared an EA that analyzes the potential environmental impacts of Western's proposed use of

  4. FINDING OF NO SIGNIFICANT IMPACT WESTERN AREA POWER ADMINISTRATION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AGREEMENT FOR PART 2 OF THE MESQUITE SOLAR ENERGY PROJECT IN MARICOPA COUNTY, ARIZONA ... (EA) (DOEEA-1796) to analyze the potential environmental impacts associated with ...

  5. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rebates & Savings Tax Credits, Rebates & Savings Solar Rights This law sustained a legal challenge in 2000. A Maricopa County Superior Court judge ruled in favor of homeowners...

  6. Pinal County, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Chuichu, Arizona Coolidge, Arizona Dudleyville, Arizona Eloy, Arizona Florence, Arizona Gold Camp, Arizona Hayden, Arizona Kearny, Arizona Mammoth, Arizona Maricopa, Arizona...

  7. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat, Solar Space Heat, Solar Thermal Process Heat, Solar Photovoltaics, Daylighting, Solar Pool Heating Solar Rights This law sustained a legal challenge in 2000. A Maricopa...

  8. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Standards In an effort to promote uniformity, the Maricopa Association of Governments (MAG) approved standard procedures for securing necessary electricalbuilding permits for...

  9. CO_CODE","PLT_CODE","YEAR","MONTH","BLANK1","BOM_DIST","ORIG_ST","MINE_TYPE","BL

    U.S. Energy Information Administration (EIA) Indexed Site

    0,01,,,,,,07,48,,3,"NG",,4,0,218000,1034,0,0,279.5,,1 050010,3451,90,01,,,,,,07,48,,2,"FO5",,7,9,5000,148000,0.5,0.1,265.6,,1 050010,3452,90,01,,,,,,07,48,,3,"NG",,4,0,1062000,1037,0,0,279.5,,1 050010,3452,90,01,,,,,,07,48,,2,"FO5",,7,9,2900,148000,0.5,0.1,265.6,,1 050010,3453,90,01,,,,,,07,48,,2,"FO5",,7,9,13500,148000,0.5,0.1,265.6,,1 050010,3453,90,01,,,,,,07,48,,3,"NG",,4,0,2469000,1015,0,0,279.5,,1

  10. CO_CODE","PLT_CODE","YEAR","MONTH","BLANK1","BOM_DIST","ORIG_ST","MINE_TYPE","BL

    U.S. Energy Information Administration (EIA) Indexed Site

    1,91,01,,,,,,07,48,,3,"NG",,4,0,1000,1024,0,0,261.7,,1 050010,3452,91,01,,,,,,07,48,,3,"NG",,4,0,1532000,1030,0,0,261.7,,1 050010,3452,91,01,,,,,,07,48,,2,"FO2",,7,9,10000,138000,0.5,0.1,564,,1 050010,3452,91,01,,,,,,07,48,,2,"FO5",,7,9,7000,148000,0.5,0.1,510.8,,1 050010,3453,91,01,,,,,,07,48,,3,"NG",,4,0,2079000,1021,0,0,261.7,,1 050010,3454,91,01,,,,,,07,48,,3,"NG",,4,0,360000,1017,0,0,261.7,,1

  11. CO_CODE","PLT_CODE","YEAR","MONTH","BLANK1","BOM_DIST","ORIG_ST","MINE_TYPE","BL

    U.S. Energy Information Administration (EIA) Indexed Site

    2,92,01,,,,,,07,48,,3,"NG",,4,0,1887000,1041,0,0,260.2,,1 050010,3453,92,01,,,,,,07,48,,3,"NG",,4,0,1248000,1025,0,0,260.2,,1 050010,3453,92,01,,,,,,07,48,,2,"FO5",,7,9,23000,148000,0.5,0.1,290.7,,1 050010,3454,92,01,,,,,,07,48,,3,"NG",,4,0,798000,1021,0,0,260.2,,1 050010,3455,92,01,,,,,,07,48,,3,"NG",,4,0,22000,1012,0,0,260.2,,1 050010,3489,92,01,,,,,,07,48,,3,"NG",,4,0,123000,1025,0,0,260.2,,1

  12. CX-007166: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pinnacle Peak-Prescott Danger Tree RemovalCX(s) Applied: B1.3Date: 03/18/2010Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  13. CX-007127: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Blythe-KnobCX(s) Applied: B1.3Date: 03/21/2011Location(s): Imperial County, California, Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  14. CX-007160: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pinnacle Peak Substation Coupling Capacitor Voltage Transformer InstallationCX(s) Applied: B4.6Date: 05/10/2010Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  15. CX-004895: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Davis Dam Switchyard (Breaker Cable Replacement)CX(s) Applied: B4.6Date: 08/05/2010Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  16. CX-007161: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pinnacle Peak Substation Conductor & Circuit Breaker ReplacementCX(s) Applied: B4.6Date: 12/03/2010Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  17. CX-007155: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Mead-Perkins Avian Nest Removal & Access Road MaintenanceCX(s) Applied: B1.3Date: 05/10/2010Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  18. CX-010546: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Liberty Substation Transformer Replacement Project, Maricopa County, Arizona CX(s) Applied: B4.11 Date: 06/06/2013 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region

  19. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Rights This law sustained a legal challenge in 2000. A Maricopa County Superior Court judge ruled in favor of homeowners in a lawsuit filed by their homeowners association seeking...

  20. CX-003757: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Propane Vehicle ConversionCX(s) Applied: A1, A9, B5.1Date: 09/08/2010Location(s): Maricopa, ArizonaOffice(s): Energy Efficiency and Renewable Energy

  1. Phoenix, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Phoenix is a city in Maricopa County, Arizona. It falls under Arizona's 2nd congressional district and Arizona's 3rd congressional...

  2. EIA - State Nuclear Profiles

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Location: Palo Verde is located in Maricopa County, on a 4,050-acre site near Wintersburg, Arizona. Construction Cost: Palo Verde units 1 and 2 cost 8.001 billion (2007 USD). Cost ...

  3. CX-003698: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Green EducationCX(s) Applied: A1, A9, B1.2, B5.1Date: 09/08/2010Location(s): Maricopa, ArizonaOffice(s): Energy Efficiency and Renewable Energy

  4. Secretary Moniz Reaffirms Energy Department's Commitment to Tribal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    came from the Salt River Pima-Maricopa Indian reservation's fourth and fifth grade robotics class. On the second day of the summit, Secretary Moniz met with tribal leadership on...

  5. CX-007146: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Flagstaff & Pinnacle Peak Communication Site Building DemolitionCX(s) Applied: B1.23Date: 08/25/2011Location(s): Coconino and Maricopa Counties, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  6. CX-007162: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pinnacle Peak Substation Electrical Equipment RemovalCX(s) Applied: B1.17Date: 05/09/2011Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  7. EA-1796: Sempra Mesquite Solar Energy Facility near Gillespie, AZ |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 6: Sempra Mesquite Solar Energy Facility near Gillespie, AZ EA-1796: Sempra Mesquite Solar Energy Facility near Gillespie, AZ February 1, 2011 EA-1796: Final Environmental Assessment Loan Guarantee to Sempra Generation for Construction of the Mesquite Solar Energy Project; Maricopa County, Arizona February 22, 2011 EA-1796: Finding of No Significant Impact Loan Guarantee to Sempra Generation for Construction of the Mesquite Solar Energy Project; Maricopa

  8. Soyminas Biodiesel | Open Energy Information

    Open Energy Info (EERE)

    Soyminas Biodiesel Jump to: navigation, search Name: Soyminas Biodiesel Place: DIST. INDUSTRIAL, Brazil Zip: 37980-000 Product: Brazilian biodiesel producer located in Minas...

  9. Will Power Company | Open Energy Information

    Open Energy Info (EERE)

    Place: Kullu Dist., Himachal Pradesh, India Sector: Hydro Product: Kullu-based small hydro project developer. References: Will Power Company1 This article is a stub. You can...

  10. R M Mohite Textiles Ltd | Open Energy Information

    Open Energy Info (EERE)

    Mohite Textiles Ltd Jump to: navigation, search Name: R. M. Mohite Textiles Ltd. Place: Dist. Kolhapur, Maharashtra, India Zip: 416 112 Sector: Hydro Product: Kolhapur based,...

  11. OTTER3.3

    Energy Science and Technology Software Center (OSTI)

    000482UNIXW00 Automated deduction for first-order logic with equality http://www.mcs.anl.gov/AR/otter/dist33

  12. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Polytope of correct (linear programming) decoding and low-weight pseudo-codewords Chertkov, Michael ; Stepanov, Mikhail Full Text Available February 2011 DistFlow ODE: modeling, ...

  13. Malana Power Company Ltd MPCL | Open Energy Information

    Open Energy Info (EERE)

    Kullu Dist., Himachal Pradesh, India Sector: Hydro Product: Kullu-based firm formed as a joint venture between SN Power and LNJ Bhilwara Group that owns hydroelectric project....

  14. Global Nuclear Energy Partnership Fact Sheet - Demonstrate More

    Office of Environmental Management (EM)

    Gila River Indian Community Renewable Energy Development Feasibility Study Committed to a Cleaner, Safer and Healthier Community 2 Indian Reservations in Arizona 3 Gila River Indian Community § Central Arizona, adjacent to Phoenix § Akimel O'odham (Pima) & Pee Posh (Maricopa) § Culturally an agricultural people § Located in Maricopa & Pinal counties § Established in 1859 by Executive Order § 374,000 acres (640 Square Miles) § Population 23,000 members §

  15. Microsoft Word - MSI Participating Institutions Rev 1 FINAL.doc

    National Nuclear Security Administration (NNSA)

    Participating Minority Serving Institutions: Alabama A&M University Allen University Benedict College Central State University Cheyney University Claflin University Clark Atlanta University Denmark Technical College Education Advancement Alliance Fisk University Florida A&M University Florida Memorial University Fort Valley State University Hampton University Hispanic Consortium Howard University Lincoln University Maricopa Community Colleges Morehouse College Morgan State University

  16. CX-000040: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pima-Maricopa Indian Community of the Salt River Reservation Energy Efficiency RetrofitsCX(s) Applied: B5.1, B2.5Date: 11/06/2009Location(s): ArizonaOffice(s): Energy Efficiency and Renewable Energy

  17. CX-007164: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Prescott-Pinnacle Peak & Pinnacle Peak-Rogers Aerial Marker Ball AdditionCX(s) Applied: B1.9Date: 01/07/2011Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  18. CX-007156: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    New Waddell-Raceway-Westwing Structure ReplacementCX(s) Applied: B4.6, B4.13Date: 03/11/2010Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  19. Hope Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Jump to: navigation, search Name: Hope Solar Address: No.6-8 Hope Road Taihu Town Tongzhou Dist Place: Beijing, China Sector: Solar Product: Solar cells and power systems...

  20. Worksheet

    U.S. Energy Information Administration (EIA) Indexed Site

    590,"Anaheim City of",6,14,"L.A. Dept of Water & Power",,9266,,,167425,167425 ... Power Authority",6,3,"Buckeye Water Conservation Dist.","FP",8383,7,37202,8571...

  1. Worksheet

    U.S. Energy Information Administration (EIA) Indexed Site

    590,"Anaheim City of",6,13,"L.A. Dept of Water & Power",,14134,,,219713,219713 ... Power Authority",6,3,"Buckeye Water Conservation Dist.","FP",8185,6,53857,1268...

  2. EA-2013: Final Environmental Assessment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Environmental Assessment EA-2013: Final Environmental Assessment Herbicide Application at Three Substations; Imperial County (California), Maricopa and Yuma Counties (Arizona) Western Area Power Administration (Western) and the Bureau of Land Management (BLM) jointly issued a final EA that analyzes the potential environmental impacts of Western's proposed use of selected herbicides for the treatment of undesirable vegetation within three existing substations on lands administered by BLM.

  3. EA-2013: Finding of No Significant Impact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3: Finding of No Significant Impact EA-2013: Finding of No Significant Impact Herbicide Application at Three Substations; Imperial County (California), Maricopa and Yuma Counties (Arizona) Western Area Power Administration (Western) issued a FONSI for Western's proposed use of selected herbicides for the treatment of undesirable vegetation within three existing substations on lands administered by the Bureau of Land Management. For more information on this project, see:

  4. EA-1796: Finding of No Significant Impact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Finding of No Significant Impact EA-1796: Finding of No Significant Impact Loan Guarantee to Sempra Generation for Construction of the Mesquite Solar Energy Project; Maricopa County, Arizona Summary Summary DOE's Western Area Power Administration issued a FONSI for the power purchase agreement, on behalf of the Navy, for renewable energy that would be generated by the Mesquite Solar Energy Project. Documents Available For Download EA-1796 FONSI 2015 (1.29 MB) More Documents & Publications

  5. CX-013540: Categorical Exclusion Determination | Department of Energy

    Office of Environmental Management (EM)

    26: Categorical Exclusion Determination CX-013526: Categorical Exclusion Determination Herbicide Application at 51 Substations Located in Arizona, California, and Nevada CX(s) Applied: B1.3 Date: 03/23/2015 Location(s): Multiple Locations Offices(s): Western Area Power Administration-Desert Southwest Region Western plans to apply pre-emergent, post-emergent, UV Inhibitor herbicides, which will include spray marking dyes, at 51 substations in Coconino, Cochise, La Paz, Maricopa, Mohave, Navajo

  6. CX-013526: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    26: Categorical Exclusion Determination CX-013526: Categorical Exclusion Determination Herbicide Application at 51 Substations Located in Arizona, California, and Nevada CX(s) Applied: B1.3 Date: 03/23/2015 Location(s): Multiple Locations Offices(s): Western Area Power Administration-Desert Southwest Region Western plans to apply pre-emergent, post-emergent, UV Inhibitor herbicides, which will include spray marking dyes, at 51 substations in Coconino, Cochise, La Paz, Maricopa, Mohave, Navajo

  7. LPO5-002-Proj-Poster-PV-Mesquite

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MESQUITE As one of the first U.S. photovoltaic solar facilities larger than 100 MW, Mesquite helped launch utility-scale solar in America. INVESTING in AMERICAN ENERGY OWNERS Sempra Energy & Consolidated Edison Development LOCATION Maricopa County, Arizona LOAN AMOUNT $337 Million ISSUANCE DATE September 2011 GENERATION CAPACITY 170 MW PROJECTED ANNUAL GENERATION 328,000 MWh CLIMATE BENEFIT 190,000 Metric Tons of CO 2 Prevented Annually

  8. "Supervisory Control and Data Acquisition (SCADA) Systems." The...

    Energy Savers [EERE]

    "Supervisory Control and Data Acquisition (SCADA) Systems." The CIP Report. Vol 7 No 8 "Supervisory Control and Data Acquisition (SCADA) Systems." The CIP Report. Vol 7 No 8 ...

  9. TABLE15.CHP:Corel VENTURA

    Gasoline and Diesel Fuel Update (EIA)

    5. Natural Gas Plant Net Production and Stocks of Petroleum Products by PAD and Refining PAD District I PAD District II Commodity East Appalachian Minn., Wis., Okla., Kans., Coast No. 1 Total Ind., Ill., Ky. N. Dak., S. Dak. Mo. Total Net Production Net Production Stocks Stocks Districts, (Thousand Barrels) PAD District III PAD Dist. PAD Dist. Commodity IV V Texas La. Texas Gulf Gulf N. La., New U.S. Inland Coast Coast Ark. Mexico Total Rocky Mt. West Coast Total January 1998 Natural Gas Liquids

  10. Environmental Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dist. Category UC-l 1, 13 DE@ 010764 Health & Environmental Research Summary of Accomplishments Prepared by Office of Energy Research /U.S. Department of Energy Washington, D.C. 20585 Reprinted April 1984 Published by Technical Information Center/U.S. Department of Energy The purpose of this brief narrative is to foster an awareness of a publicly funded health and environmental research program chartered nearly forty years ago, of its contributions toward the national goal of safe and

  11. Overview of the CPUC's California Solar Initiative and DG Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Overview of the CPUC's California Solar Initiative and DG Programs: James Loewen, Energy Division California Public Utilities Commission For NREL Incentive Program Webinar September 27, 2012 www.cpuc.ca.gov/PUC/energy/DistGen/ 2 DG and Renewables Policies and Programs DG Type Programs System-Side Generation or Utility-Side Procurement Renewable Portfolio Standard (RPS) Program  Feed-in Tariffs (Market Price Referent)  Renewable Auction Mechanism (RAM)  Utility Solar PV Programs 

  12. PUBLIC ADMINISTRATION COLORADO GOLDEN FIELD OFFICE POC Karen Downs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PUBLIC ADMINISTRATION COLORADO GOLDEN FIELD OFFICE POC Karen Downs Telephone (720) 356-1269 Email karen.downs@go.doe.gov Police Protection 922120 Administration of Education Programs 923110 International Affairs 928120 DIST OF COLUMBIA HEADQUARTERS PROCUREMENT POC Michael Raizen Telephone (202) 287-1512 Email michael.raizen@hq.doe.gov Police Protection 922120 Administration of Education Programs 923110 Administration of Human Resource Programs (except Education, Public Health, and Veterans'

  13. Michigan State University | OSTI, US Dept of Energy Office of Scientific

    Office of Scientific and Technical Information (OSTI)

    and Technical Information Michigan State University Spotlights Home DOE Applauds Michigan State University Science and Technical Programs Professors and Faculty of Interest Asst. Prof. Lisa Lapidus advances fundamental understanding of protein assembly Dist. Prof. Bradley Sherrill hosts FRIB's international scientists works Assoc. Prof. Norbert Mueller leads team to develop wave disk generator Exceptional Student Research Student engineers construct a humanitarian bicycle built for two

  14. Visioning the 21st Century Electricity Industry: Outcomes and Strategies for America

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lauren Azar Senior Advisor to the Secretary U. S. Department of Energy 8 February 2012 Visioning the 21 st Century Electricity Industry: Strategies and Outcomes for America http://teeic.anl.gov/er/transmission/restech/dist/index.cfm We all have "visions," in one form or another: * Corporations call them strategic plans * RTOs ... transmission expansion plans or Order 1000 plans * State PUCs ... integrated resource plans * Employees ... career goals Artist: Paolo Frattesi Artist: Paolo

  15. Requested information regarding remote analytical capabilities

    SciTech Connect (OSTI)

    Steel, R.T.

    1991-09-01

    This document describes a new method for analysis of cyanide in radioactive waste samples from the Hanford Site. The new assay is designed to increase throughput of samples, reduce waste volumes and decrease radiation exposure to analysts. The system is based on the Lachat Micro-Dist{sup TM} microdistillation system. This document contains the reference and methods manual for this kit, and also the specific PNL lab procedures for using this kit. 6 refs., 20 figs. (MHB)

  16. Propane Vehicle Demonstration Grant Program

    SciTech Connect (OSTI)

    Jack Mallinger

    2004-08-27

    Project Description: Propane Vehicle Demonstration Grants The Propane Vehicle Demonstration Grants was established to demonstrate the benefits of new propane equipment. The US Department of Energy, the Propane Education & Research Council (PERC) and the Propane Vehicle Council (PVC) partnered in this program. The project impacted ten different states, 179 vehicles, and 15 new propane fueling facilities. Based on estimates provided, this project generated a minimum of 1,441,000 new gallons of propane sold for the vehicle market annually. Additionally, two new off-road engines were brought to the market. Projects originally funded under this project were the City of Portland, Colorado, Kansas City, Impco Technologies, Jasper Engines, Maricopa County, New Jersey State, Port of Houston, Salt Lake City Newspaper, Suburban Propane, Mutual Liquid Propane and Ted Johnson.

  17. "Supervisory Control and Data Acquisition (SCADA) Systems." The CIP Report.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vol 7 No 8 | Department of Energy "Supervisory Control and Data Acquisition (SCADA) Systems." The CIP Report. Vol 7 No 8 "Supervisory Control and Data Acquisition (SCADA) Systems." The CIP Report. Vol 7 No 8 Featured in this month's issue of The CIP Report are Supervisory Control and Data Acquisition (SCADA) systems. SCADA systems monitor and control the processes of many of our Nation's infrastructures. The security and safety of transportation, water, communications,

  18. Landslide oil field, San Joaquin Valley, California

    SciTech Connect (OSTI)

    Collins, B.P.; March, K.A.; Caballero, J.S.; Stolle, J.M.

    1988-03-01

    The Landslide field, located at the southern margin of the San Joaquin basin, was discovered in 1985 by a partnership headed by Channel Exploration Company, on a farm out from Tenneco Oil Company. Initial production from the Tenneco San Emidio 63X-30 was 2064 BOPD, making landslide one of the largest onshore discoveries in California during the past decade. Current production is 7100 BOPD from a sandstone reservoir at 12,500 ft. Fifteen wells have been drilled in the field, six of which are water injectors. Production from the Landslide field occurs from a series of upper Miocene Stevens turbidite sandstones that lie obliquely across an east-plunging structural nose. These turbidite sandstones were deposited as channel-fill sequences within a narrowly bounded levied channel complex. Both the Landslide field and the larger Yowlumne field, located 3 mi to the northwest, comprise a single channel-fan depositional system that developed in the restricted deep-water portion of the San Joaquin basin. Information from the open-hole logs, three-dimensional surveys, vertical seismic profiles, repeat formation tester data, cores, and pressure buildup tests allowed continuous drilling from the initial discovery to the final waterflood injector, without a single dry hole. In addition, the successful application of three-dimensional seismic data in the Landslide development program has helped correctly image channel-fan anomalies in the southern Maricopa basin, where data quality and severe velocity problems have hampered previous efforts. New exploration targets are currently being evaluated on the acreage surrounding the Landslide discovery and should lead to an interesting new round of drilling activity in the Maricopa basin.

  19. The NIAC Convergence of Physical and Cyber Technbologies and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    deliberations. The NIAC Convergence of Physical and Cyber Technbologies and Related ... Vol 7 No 8 Cybersecurity for Energy Delivery Systems 2010 Peer Review Energy ...

  20. Colombia Ministry of Environment | Open Energy Information

    Open Energy Info (EERE)

    Colombia Ministry of Environment Jump to: navigation, search Logo: Colombia Ministry of Environment Name: Colombia Ministry of Environment Address: Calle 37 No. 8-40 - Bogot,...

  1. Ground Control Progress Continues at WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Day) Process: Gross Input to Atmospheric Crude Oil Dist. Units Operable Capacity (Calendar Day) Operating Capacity Idle Operable Capacity Operable Utilization Rate Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Process Area Jan-16 Feb-16 Mar-16 Apr-16 May-16 Jun-16 View History U.S. 16,365 16,167 16,261 16,222 16,477 16,803 1985-2016 PADD 1 1,136 1,080 1,052 1,148 1,174 1,155 1985-2016 East

  2. Los Alamos National Laboratories | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Alamos National Laboratories Los Alamos National Laboratory Steam Plant Project Usage Data 2 10_SMSI_SteamPlant_ThermalBasis of Analysis-Q1(011514) 2.10_SMSI_ApproxEst$Reconcile-Bechtel2009-SMSI-2013 2.10_SMSI_PipingAnnualR&R-Est_Rev122313 2.10_SMSI_Steam_CombinedEcon_011714_100%(Rev1) 2.10_SMSI_Steam_DistSystemOnlyEcon_011714_100% 2.10_SMSI_Steam_Option1-SteamCapitalEst(No-LANL$... A story of tech transfer success: prize-winning innovation for HPC Last month, NNSA's Technology Transfer

  3. untitled

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Elaine Webb Project Manager Bearskin Services Tulsa, Oklahoma Special thanks to: SWPA Ron Beck Marshall Boyken Kenny Broadaway Linda Dunham Steve Hill Ricky Jones Darlene Low Harry Mardirosian Jim McDonald Ernie Millsap Beth Nielsen Margaret Skidmore Tracey Stewart Carlos Valencia CNI/Bearskin Ashley Butler Vicki Clarke Ruben Garcia William Hiller Kathy O'Neal SW Division Corps Sherman Jones Vicksburg Dist. Corps Brian Westfall Dusty Wilson U P DAT E S O U T H W E S T E R N P O W E R A D M I N I

  4. Gross Input to Atmospheric Crude Oil Distillation Units

    U.S. Energy Information Administration (EIA) Indexed Site

    Day) Process: Gross Input to Atmospheric Crude Oil Dist. Units Operable Capacity (Calendar Day) Operating Capacity Idle Operable Capacity Operable Utilization Rate Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Process Area Jan-16 Feb-16 Mar-16 Apr-16 May-16 Jun-16 View History U.S. 16,365 16,167 16,261 16,222 16,477 16,803 1985-2016 PADD 1 1,136 1,080 1,052 1,148 1,174 1,155 1985-2016 East

  5. TPSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TPSL TPSL Description The Cray Third Party Scientific Libraries (TPSL), is a collection of scientific libraries and solvers contaning: MUMPS ParMetis SuperLU, SuperLU_DIST Hypre Scotch Sundials Access The Cray TPSL module is available on the NERSC Cray systems, Cori and Edison. To use: module load cray-tpsl Using TPSL After loading the cray-tpsl module, the compiler wrappers (ftn, cc, CC) will automatically link with the all the included third party libraries. To find out which versions of each

  6. Performance analysis of parallel supernodal sparse LU factorization

    SciTech Connect (OSTI)

    Grigori, Laura; Li, Xiaoye S.

    2004-02-05

    We investigate performance characteristics for the LU factorization of large matrices with various sparsity patterns. We consider supernodal right-looking parallel factorization on a bi-dimensional grid of processors, making use of static pivoting. We develop a performance model and we validate it using the implementation in SuperLU-DIST, the real matrices and the IBM Power3 machine at NERSC. We use this model to obtain performance bounds on parallel computers, to perform scalability analysis and to identify performance bottlenecks. We also discuss the role of load balance and data distribution in this approach.

  7. Application to Export Electric Energy OE Docket No. EA-393 Emera Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Subsidiary No. 8 LLC | Department of Energy LLC Application to Export Electric Energy OE Docket No. EA-393 Emera Energy Services Subsidiary No. 8 LLC Application from Emera Energy (EESS-8) to export electric energy to Canada. EA-393 Emera Energy Sub. 8 (CN).pdf (689.96 KB) More Documents & Publications Application to Export Electric Energy OE Docket No. EA-393 Emera Energy Services Subsidiary No. 8 LLC: Federal Register Notice, Volume 79, No. 55 - March 21, 2014 Application to

  8. IMPORTANCE OF FULL COULOMB INTERACTIONS FOR UNDERSTANDING THE...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review B, vol. 82, no. 8, August 15, 2010, pp. 085117-1-5; Journal ...

  9. Application to Export Electric Energy OE Docket No. EA-393 Emera...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LLC Application to Export Electric Energy OE Docket No. EA-393 Emera Energy Services Subsidiary No. 8 LLC Application from Emera Energy (EESS-8) to export electric energy to ...

  10. Application to Export Electric Energy OE Docket No. EA-393 Emera...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LLC: Federal Register Notice, Volume 79, No. 55 - March 21, 2014 Application to Export Electric Energy OE Docket No. EA-393 Emera Energy Services Subsidiary No. 8 LLC: Federal ...

  11. A Distributed Python HPC Framework: ODIN, PyTrilinos, & Seamless

    SciTech Connect (OSTI)

    Grant, Robert

    2015-11-23

    Under this grant, three significant software packages were developed or improved, all with the goal of improving the ease-of-use of HPC libraries. The first component is a Python package, named DistArray (originally named Odin), that provides a high-level interface to distributed array computing. This interface is based on the popular and widely used NumPy package and is integrated with the IPython project for enhanced interactive parallel distributed computing. The second Python package is the Distributed Array Protocol (DAP) that enables separate distributed array libraries to share arrays efficiently without copying or sending messages. If a distributed array library supports the DAP, it is then automatically able to communicate with any other library that also supports the protocol. This protocol allows DistArray to communicate with the Trilinos library via PyTrilinos, which was also enhanced during this project. A third package, PyTrilinos, was extended to support distributed structured arrays (in addition to the unstructured arrays of its original design), allow more flexible distributed arrays (i.e., the restriction to double precision data was lifted), and implement the DAP. DAP support includes both exporting the protocol so that external packages can use distributed Trilinos data structures, and importing the protocol so that PyTrilinos can work with distributed data from external packages.

  12. Los Alamos National Laboratory Steam Plant Project Usage Data | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Usage Data 2 10_SMSI_SteamPlant_ThermalBasis of Analysis-Q1(011514) 2.10_SMSI_ApproxEst$Reconcile-Bechtel2009-SMSI-2013 2.10_SMSI_PipingAnnualR&R-Est_Rev122313 2.10_SMSI_Steam_CombinedEcon_011714_100%(Rev1) 2.10_SMSI_Steam_DistSystemOnlyEcon_011714_100% 2.10_SMSI_Steam_Option1-SteamCapitalEst(No-LANL$'s)_011714_100% 2.10_SMSI-Steam_Option2-HW-CapitalEst(No-LANL$'s)_011714_100% 131209XU50_XURP-LANL-Data_w-CostAlloc_CHP_121213 DOE Complex Experience

  13. SherryLi.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for SuperLU a nd T OORSES X. S herry L i Scien0fic C ompu0ng G roup, L BNL NERSC ASCR Requirements for 2017 January 15, 2014 LBNL 1. P roject D escrip0on ( 1 o f 2 ) PI: S herry L i, L BNL * Summarize y our p roject(s) a nd i ts s cien0fic o bjec0ves through 2 017 * SuperLU i s a d irect s olver l ibrary f or s parse l inear s ystems * Most p arallel o ne i s SuperLU_DIST, M PI---only a t p resent * Many u sers: 2 7,403 d ownloads i n F Y13 * Included i n C ray's LibSci, F EMLAB, H P's M athLib,

  14. An overview of SuperLU: Algorithms, implementation, and userinterface

    SciTech Connect (OSTI)

    Li, Xiaoye S.

    2003-09-30

    We give an overview of the algorithms, design philosophy,and implementation techniques in the software SuperLU, for solving sparseunsymmetric linear systems. In particular, we highlight the differencesbetween the sequential SuperLU (including its multithreaded extension)and parallel SuperLU_DIST. These include the numerical pivoting strategy,the ordering strategy for preserving sparsity, the ordering in which theupdating tasks are performed, the numerical kernel, and theparallelization strategy. Because of the scalability concern, theparallel code is drastically different from the sequential one. Wedescribe the user interfaces ofthe libraries, and illustrate how to usethe libraries most efficiently depending on some matrix characteristics.Finally, we give some examples of how the solver has been used inlarge-scale scientific applications, and the performance.

  15. Application to Export Electric Energy OE Docket No. EA-393 Emera Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Subsidiary No. 8 LLC: Federal Register Notice, Volume 79, No. 55 - March 21, 2014 | Department of Energy LLC: Federal Register Notice, Volume 79, No. 55 - March 21, 2014 Application to Export Electric Energy OE Docket No. EA-393 Emera Energy Services Subsidiary No. 8 LLC: Federal Register Notice, Volume 79, No. 55 - March 21, 2014 Application from Emera Energy (EESS-8) to export electric energy to Canada. Federal Register Notice. EA-393 Emera Energy EESS-8 CN.pdf (124.55 KB) More

  16. Jefferson Lab's Distributed Data Acquisition

    SciTech Connect (OSTI)

    Trent Allison; Thomas Powers

    2006-05-01

    Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) occasionally experiences fast intermittent beam instabilities that are difficult to isolate and result in downtime. The Distributed Data Acquisition (Dist DAQ) system is being developed to detect and quickly locate such instabilities. It will consist of multiple Ethernet based data acquisition chassis distributed throughout the seven-eights of a mile CEBAF site. Each chassis will monitor various control system signals that are only available locally and/or monitored by systems with small bandwidths that cannot identify fast transients. The chassis will collect data at rates up to 40 Msps in circular buffers that can be frozen and unrolled after an event trigger. These triggers will be derived from signals such as periodic timers or accelerator faults and be distributed via a custom fiber optic event trigger network. This triggering scheme will allow all the data acquisition chassis to be triggered simultaneously and provide a snapshot of relevant CEBAF control signals. The data will then be automatically analyzed for frequency content and transients to determine if and where instabilities exist.

  17. The kinetics and quantitation of platelet deposition on control (CPC) and heparin-bonded polyurethane angio-catheter (HBPC) with indium-111 labeled platelets in a dog model

    SciTech Connect (OSTI)

    Dewanjee, M.K.; Rowland, S.M.; Dewanjee, P.K.; Kapadvanjwala, M.; MacGregor, D.C.; Serafini, A.N.; Palatianos, G.M.; Georgiou, M.F.; Sfakianakis, G.N. )

    1990-01-01

    The dynamics of platelet deposition on CPC and HBPC was evaluated with In-111 labeled platelets (In-PLT) with a computerized gamma camera (CGC). Ten non-heparinized dogs (18-25 kg) were catheterized in both femoral arteries with 10 cm of CPC and HBPC (5 Fr., Cordis, Inc.) 24 hours post-injection of 300-420 microcuries of In-PLT, and imaged for 3 hours with gamma camera. The regional platelet deposition on three segments of catheters and puncture site was determined. The catheters were harvested and radioactivity on the catheter segments (proximal: PROX, middle: MID, distal: DIST and puncture site: PS) of both was determined. From the platelet count in blood, radioactivity in blood and segments of catheters, adjacent artery and area of artery and catheter, the platelet-density (X10(3)) (mean +/- S.D.) on catheter and artery were calculated and tabulated: (table; see text) The large standard deviation of retained platelets is due to embolization. The platelet-density and regional counts on catheter segments were lower in the HBPC than CPC. The rate of platelet-deposition was lower in the HBPC than CPC. Most of the thrombi were lost during pullout of the catheter. Both in vivo (dynamic) and in vitro studies were necessary for evaluation of CPC thrombogenicity.

  18. EA-324 Emera Energy Services Subsidiary No. 4 LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Emera Energy Services Subsidiary No. 4 LLC EA-324 Emera Energy Services Subsidiary No. 4 LLC Order authorizing Emera Energy Services Subsidiary No. 4 LLC to export electric energy to Canada EA- 324 Emera Energy Services Subsidiary No. 4 LLC (3.03 MB) More Documents & Publications EA-391 Emera Energy Services Subsidiary No. 6 LLC EA-392 Emera Energy Services Subsidiary No. 7 LLC EA-393 Emera Energy Services Subsidiary No. 8

  19. Advanced Fuel Performance: Modeling and Simulation Light Water Reactor Fuel Performance:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    63 No. 8 * JOM 49 www.tms.org/jom.html Advanced Fuel Performance: Modeling and Simulation Light Water Reactor Fuel Performance: Current Status, Challenges, and Future High Fidelity Modeling K. Edsinger, C.R. Stanek, and B.D. Wirth How would you... ...describe the overall signifcance of this paper? This paper provides a concise description of the nuclear fuel used in pressurized water nuclear reactors and the most commonly observed fuel failure mechanisms. ...describe this work to a materials

  20. CASL - Special Issue of the JOM: The Member Journal of TMS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Special Issue of the JOM: The Member Journal of TMS vol 63 (no.8), August 2011 Editors: Brian Wirth (UTK - ORNL), Chris Stanek (LANL) and Kurt Edsinger (EPRI) CASL-MPO team members served as guest editors for vol 63, issue 8 of JOM (Journal of TMS, the Minerals, Metal and Materials Society) dedicated to Advanced Fuel Performance: Modeling and Simulation. The authors of these articles represent the formation of an industry, university and national lab team under CASL. In addition to Perspective

  1. High Carbon Fly Ash Treatment | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Carbon Fly Ash Treatment NETL Collaborators Invent Method for Treating High Carbon Fly Ash The U.S. Patent and Trademark Office has assigned Patent No. 8,440,015 to researchers from Waynesburg University and the National Energy Technology Laboratory (NETL) for a thermal method that retains yet passivates carbon and/or other components in fly ash. John Baltrus, a research chemist at NETL, along with Professor Robert LaCount and Douglas Kern of Waynesburg University cooperated on the

  2. Notices Safety Commission, 4330 East West

    National Nuclear Security Administration (NNSA)

    20 Federal Register / Vol. 77, No. 8 / Thursday, January 12, 2012 / Notices Safety Commission, 4330 East West Highway, Bethesda, MD 20814, (301) 504-7923. Dated: January 10, 2012. Todd A Stevenson, Secretary. [FR Doc. 2012-625 Filed 1-10-12; 4:15 pm] BILLING CODE 6355-01-P CORPORATION FOR NATIONAL AND COMMUNITY SERVICE Information Collection; Submission for OMB Review, Comment Request AGENCY: Corporation for National and Community Service. ACTION: Notice. SUMMARY: The Corporation for National

  3. Comparison of the Epson Expression 1680 flatbed and the Vidar VXR-16 Dosimetry PRO trade mark sign film scanners for use in IMRT dosimetry using Gafchromic and radiographic film

    SciTech Connect (OSTI)

    Wilcox, Ellen; Daskalov, George; Nedialkova, Lucy

    2007-01-15

    Intensity-modulated radiotherapy (IMRT) treatment plan verification is often done using Kodak EDR2 film and a Vidar Dosimetry PRO trade mark sign film digitizer. However, since many hospitals are moving towards a filmless environment, access to a film processor may not be available. Therefore, we have investigated a newly available Gafchromic[reg] EBT film for IMRT dosimetry. Planar IMRT dose distributions are delivered to both EBT and EDR2 film and scanned with the Vidar VXR-16 as well as an Epson Expression 1680 flatbed scanner. The measured dose distributions are then compared to those calculated with a Pinnacle treatment planning system. The IMRT treatments consisted of 7-9 6 MV beams for treatment of prostate, head and neck, and a few other sites. The films were analyzed using FilmQA trade mark sign (3cognition LLC) software. Comparisons between measured and calculated dose distributions are reported as dose difference (DD) (pixels within {+-}5%), distance to agreement (DTA) (3 mm), as well as gamma values ({gamma}) (dose={+-}3%, dist.=2 mm). Using EDR2 with the Vidar scanner is an established technique and agreement between calculated and measured dose distributions was better than 90% in all indices (DD, DTA, and {gamma}). However, agreement with calculations deteriorated reaching the lower 80% for EBT film scans with the Vidar scanner in logarithmic mode. The EBT Vidar scans obtained in linear mode showed an improved agreement to the upper 80% range, but artifacts were still observed across the scan. These artifacts were very distinct in all EBT scans and can be attributed to the way the film is transported through the scanner. In the Epson scanner both films are rigidly immobilized and the light source scans over the film. It was found that the Epson scanner performed equally well with both types of film giving agreement to better than 90% in all indices.

  4. Kinetics and quantitation of In-111 labeled platelet deposition on control and heparin-bonded polyurethane angio catheters in a dog model

    SciTech Connect (OSTI)

    Dewanjee, M.K.; Rowland, S.M.; Robinson, R.P.; Dewanjee, P.K.; Halgovich, J.L.; Kapadvanjwala, M.; MacGregor, D.C.; Serafini, A.N.; Palatianos, G.M.; Sfakianakis, G.N. )

    1989-07-01

    The dynamics of platelet deposition on control polyurethane catheters (CPC) and heparin-bonded polyurethane catheters (HBPC) were evaluated with In-111 labeled platelets (In-PLT) using a computerized gamma camera (CGC). Ten nonheparinized dogs (18-25 kg) had both femoral arteries catherized with 10 cm of CPC and HBPC (5 Fr.) 24 hr postinjection of 300-420 microcuries of In-PLT, and imaged for 3 hr with a gamma camera. Regional platelet deposition on three segments of catheters and the puncture site was determined. Catheters were harvested and radioactivity on the catheter segments (proximal: PROX, middle: MID, distal: DIST and puncture site: PS) of both was determined. From the platelet count in blood, and radioactivity in blood and segments of catheters, adjacent artery, and area of artery and catheter, the platelet-density (X10(3) (mean +/- S.D.)) on catheter and artery was calculated and tabulated. Proximal values were cath (CPC), 1289 +/- 1125; artery, 1355 +/- 587; cath (HBPC), 125 +/- 113; artery, 1149 +/- 1620. The middle values were cath (CPC), 1102 +/- 1109; artery, 1512 +/- 625; cath (HBPC), 132 +/- 108; artery, 1011 +/- 942. Distal values were cath (CPC), 780 +/- 584; artery, 132 +/- 108; cath (HBPC), 227 +/- 194; artery, 1457 +/- 1309. The puncture site values were cath (CPC), 106 +/- 382; artery, 1011 +/- 942; cath (HBPC), 164 +/- 135; artery, 1498 +/- 1240. The large standard deviation in retained platelets is due to embolization. The platelet-density and regional counts on catheter segments were lower with HBPC than CPC, as was the rate of platelet-deposition.

  5. Precombustion removal of hazardous air pollutant precursors. Technical progress report, July 1, 1996--September 30, 1996

    SciTech Connect (OSTI)

    1996-09-19

    This project involves the development of an optimized, bench-scale processing circuit capable of efficiently removing trace elements from run-of-mine coals. The optimized circuit will be developed using characterization data obtained from detailed washability studies and release analyses tests conducted with several eastern U.S. coals. The optimized circuit will incorporate a variety of conventional and advanced coal cleaning processes. The coal products from the optimized circuit will be further treated with complexing agents specifically designed to extract organometallic trace elements that are difficult to remove by physical cleaning operations. Finally, innovative bioremediation schemes will be investigated as a means of controlling the release of trace elements from the process waste streams. Emphasis has been placed on the development of a processing circuit which (i) maximizes the rejection of trace elements, (ii) minimizes the production of coal fines which are costly to process and less marketable, and (iii) minimizes the downstream impacts of the process waste on the environment. During the past quarter, several key subtasks were completed. Most of the characterization tests for the Pittsburgh No. 8 coal have now been concluded. These include all activities associated with Subtasks 3.2 washability analysis, 3.3 flotation release analysis, and 3.4 SEM/image analysis. A large portion of the bench-scale test work was also completed during the past quarter for the Pittsburgh No. 8 coal under Subtask 4.1 heavy media testing. Additional bench-scale tests are underway as outlined in Subtask 4.2 froth flotation and 4.3 enhanced gravity separation. Finally, experiments conducted under Subtasks 6.1 analysis of pond toxics and 6.2 control method evaluation using samples of refuse from the Pittsburgh No. 8 seam indicate that significant reductions (up to 90%) in trace element content can be achieved through the application of microbial mats.

  6. Microsoft Word - DE-AC06-09RL15009 Section J.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    III Contract No. DE-AC06-09RL15009 Section J Page J-1 Section J Part III - List of Attachments Table of Contents Section Title Page No. J.1 Covered Site Contractors/Sub-Contractors J-2 J.2 Hardware and Software System Requirements J-4 J.3 Wage Determination No. 2005-2569, Revision No. 8 J-5 J.4 Legal Management Plan J-16 (to be inserted 60 days after award) J.5 Continuity of Operations Plan J-17 (to be inserted 60 days after award) J.6 List of Applicable DOE Directives and Contractor

  7. Microsoft Word - AR VR rev.1.wpd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EA15PC3041-1-0 August 18, 2003 Rev. 1 Page 1 of 1 Working Copy AR/VR Transmittal Register 1. Page 1 of 2. PR/PO Number: 3. Supplier: 4. Buyer: 5. STR or Cognizant Engineer: 6. Project, System, or Equipment Description: 7. AR/VR No. 8. SOW or Spec. No. 9. Description of Submittal or Special Conditions 10. For Approval/ Record 11. Date Due to WTS or Prior to 12. Date Rec. 13. Date to STR 14. Date from STR 15. Disposition A, C, D 16. Resubmittal Required? 17. Date to Supplier 1. Facility Compliance

  8. 1.1-J, 120-fs laser system based on Nd:glass-pumped Ti:sapphire

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15, 1996 / Vol. 21, No. 8 / OPTICS LETTERS 603 1.1-J, 120-fs laser system based on Nd : glass-pumped Ti : sapphire A. Sullivan, J. Bonlie, D. F. Price, and W. E. White Lawrence Livermore National Laboratory, L-251, 7000 East Avenue, Livermore, California 94550 Received September 26, 1995 We have developed an ultrashort-pulse laser system in which the f inal Ti : sapphire amplif ier stage is pumped by the frequency-doubled output of a Nd : glass laser. The laser produces pulses with an energy in

  9. IDO-19300bfigs.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fig. 58 )... ~ ~ ~ ~ G ~ ~ ~ ~ ~ ~ ~ ~ ~~ .,,;:0) ~ ~ " ~ --J)... ~~ ~~ ~ ~ I() ~ l4:: I 4 fi } ~ ~ ,- c "' Pf/()TO-ANALYSIS OF VESSEL INTERIOR. i8ERRJNrE:QFROM tJSNPIC REPORT N-PZII P.6) 59. 4 MINIATURE CAMERA PHOTOGRAPH THROUGH PORT No.8 Fig. 61 ~ .0 - I - - " .I~ , . ~ ~ / Q fr) WATER PROBE ENTRY REFERENCE DIMENSIONS Fig.63 CORE SHP.OUD ~ ~ (() .~ t( ." O}'PICJAL USE ON1.f .50RVEYE./) - J/IN. /0. /96'/ RAOIATION SURVEYOF SL -I MILITARY TRAINING BUILOING Fig.69 5VA v£YED

  10. AMENDMENT OF SOLlClTATlONlMODlFlCATION OF CONTRACT 1 I . CONTR"CT ID CODE

    National Nuclear Security Administration (NNSA)

    SOLlClTATlONlMODlFlCATION OF CONTRACT 1 I . CONTR"CT ID CODE BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, VA 24506 PAGE 1 OF 2 PAGES Albuquerque, NM 8718Ii4400 I Amarillo, TX 79120 9B. DATED (SEE m M 11) 10A. MODIFICATION OF CONTRACTIORDER NO. 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, &ate, ZIP Code) I ( DE-ACOCOOAL66620 10B. DATED (SEE / E M 13) 2. AMENDMENT/MODIFICATION NO. M097 9A. AMENDMENT OF SOLICITATION NO. Offera must a d t n d e d p rsceipt of this m e n

  11. L

    Office of Legacy Management (LM)

    9, . 1-. &cp" s' kJ(q> aG .z 9 . *9 2 ' : ,.-(i 0 q e AA.. : !kl!lD! L = ; ' .g-..z . ?.' - ._ M j 5%' ' ... J n ,oP ' * l *** / < .' - fly .i Lr' . . J / i . . ' , / c' J .? ,a) \ ' d UN ITED' STATES / ! ' NUCLEAR REGULATORY COMMISSION . WASHINGTON, D.C. 20555 CCT 1 0 1991 AECE!VF? ' gf r-,; 25 2,: :"2 Amendment No. 8 Babcock 8 Wilcox ATTN: Mr. Bernie L. Haertjens Manager, Technical Control Pennsylvania Nuclear Service Operations 609 North b!arren Avenue Apollo, Pennsylvania

  12. DE-AC05-06OR23100

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3504 Item No. 8 See Block 16C 292 1 1 13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14. 12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended. is extended, Items 8 and 15, and returning Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing The above numbered solicitation is amended as set

  13. HIGH PRESSURE COAL COMBUSTION KINETICS PROJECT

    SciTech Connect (OSTI)

    Chris Guenther

    2002-10-28

    The modifications to the SRT-RCFR facility described in the June report were completed. As a result of these changes, the furnace hot zone was increased in length from 7 cm to 15.5 cm. The injector region of the furnace, providing entrainment and sheath flows, was unchanged, while the flow path from the exit of the furnace to the sample collection section was shortened by approximately 10 cm. The modified facility was used to resume testing of Pittsburgh No. 8 coal at 10 atm. The first goal was to confirm that the facility now provides true secondary pyrolysis test conditions. That is, the tar product should be completely converted to soot even in the absence of oxygen in the gas stream. We have now performed four tests with pure argon carrier gas, and have consistently observed voluminous soot product with little or no evidence of tar. Thus, this objective was met. The clogging problems for Pittsburgh No. 8 coal under secondary pyrolysis test conditions may preclude achieving this data point. In that case, we will make measurements under oxidizing conditions, which are expected to eliminate the clogging, and to gradually reduce the oxygen content to the point where product yields can reliably be extrapolated to the zero oxygen case.

  14. Proof of concept and performance optimization of high gravity batch type centrifuge for dewatering fine coal

    SciTech Connect (OSTI)

    Smith, L.B.; Durney, T.E. Jr.

    1990-10-24

    Coal Technology Corporation (CTC) believes that the new CTC high gravity, high production, batch type centrifugal dryer technology can play a significant role in improving the product quality as well as costs of operation in coal processing plants. It is further believed that the new centrifugal dryer technology can form an important part in systems used to clean up the millions of tons of coal fines in refuse piles and ponds. Work has progressed to the point where the new centrifugal dryer technology is nearly ready for commercialization. The primary objective of this project is to prove the concept in a commercial coal processing plant environment. The proof of concept tests will include testing with a variety of coals from different regions. A further objective will be to optimize the efficiency and the cost effectiveness of the new centrifugal dryer technology. To supply some perspective on the ability of the new centrifuges to successfully dry a variety of coals from various coal fields, it was decided that coals ranging from very fine to course size consists and with both low and high inherent moistures would be tested. Coals tested include: Pittsburgh no. 8 seam (Pennsylvania), Pittsburgh no. 8 seam (West Virginia), and Blue Creek Seam (Alabama). 6 figs.

  15. Novel microorganism for selective separation of coal from ash and pyrite; First quarterly technical progress report, September 1, 1993--November 30, 1993

    SciTech Connect (OSTI)

    Misra, M.; Smith, R.W.; Raichur, A.M.

    1993-12-31

    This report summarizes the progress made during the first quarter of the research project entitled ``A Novel Microorganism for Selective Separation of Coal from Ash and Pyrite,`` DOE Grant No. DE-FG22-93PC93215. The objective of this project is to study the effectiveness of a novel hydrophobic microorganism, Mycobacterium phlei (M. phlei), for the selective flocculation of coal from pyrite and ash-forming minerals. During the reporting period, three different coal samples: Illinois No. 6 coal, Kentucky No. 9 coal and Pittsburgh No. 8 coal, were collected to be used in the investigation. The microorganism, M. phlei, was obtained as freeze-dried cultures and the growth characteristics of the bacteria were studied. Scanning electron microphotographs revealed that M. phlei cells are coccal in shape and are approximately 1 {mu}m in diameter. Electrokinetic measurements showed that the Illinois No. 6 and Pittsburgh No. 8 coal samples had an isoelectric point (IEP) around pH 6 whereas M. phlei had an IEP around pH 1.5. Electrokinetic measurements of the ruptured microorganisms exhibited an increase in IEP. The increase in IEP of the ruputured cells was due to the release of fatty acids and polar groups from the cell membrane.

  16. Modified approaches for high pressure filtration of fine clean coal

    SciTech Connect (OSTI)

    Yang, J.; Groppo, J.G.; Parekh, B.K. [Center for Applied Energy Research, Lexington, KY (United States)

    1995-12-31

    Removal of moisture from fine (minus 28 mesh) clean coal to 20% or lower level is difficult using the conventional vacuum dewatering technique. High pressure filtration technique provides an avenue for obtaining low moisture in fine clean coal. This paper describes a couple of novel approaches for dewatering of fine clean coal using pressure filtration which provides much lower moisture in fine clean coal than that obtained using conventional pressure filter. The approaches involve (a) split stream dewatering and (b) addition of paper pulp to the coal slurry. For Pittsburgh No. 8 coal slurry, split stream dewatering at 400 mesh provided filter cake containing 12.9% moisture compared to 24.9% obtained on the feed material. The addition of paper pulp to the slurry provided filter cake containing about 17% moisture.

  17. Materials performance at the Wilsonville Coal Liquefaction Facility, 1989--1991

    SciTech Connect (OSTI)

    Keiser, J.R. ); Patko, A.J. . Southern Clean Fuels Div.)

    1991-01-01

    The Advanced Coal Liquefaction Research and Development Facility in Wilsonville, Alabama, is funded by the US Department of Energy (DOE), the Electric Power Research Institute (EPRI), and Amoco Corporation. On behalf of these organizations, Southern Company Services manages and Southern Clean Fuels Division of Southern Electric International operates the Wilsonville facility. Oak Ridge National Laboratory (ORNL) receives funding from DOE to provide materials technical support to the Wilsonville operators. For the period July 1987 through November 1990 the plant was operated with two reactors a thermal reactor and a catalytic reactor in a close-coupled integrated two-stage liquefaction mode. Coal processed was obtained from several seams including Ohio No. 6, Illinois No. 6, and Pittsburgh No. 8, as well as Texas lignite and several subbituminous coals. Corrosion samples which were removed for examination at the end of this period were exposed in the vacuum distillation tower, the atmospheric distillation tower, the high pressure separator, and first stage reactor.

  18. Carbon dioxide transport and sorption behavior in confined coal cores for carbon sequestration

    SciTech Connect (OSTI)

    Jikich, S.A.; McLendon, R.; Seshadri, K.; Irdi, G.; Smith, D.H.

    2009-02-15

    Measurements of sorption isotherms and transport properties of carbon dioxide (CO{sub 2}) in coal cores are important for designing enhanced coalbed-methane/CO{sub 2}-sequestration field projects. Many of the coals will be deep and under considerable lithostatic and hydrostatic pressures. These lithostatic pressures may reduce the sorption capacities and/or transport rates significantly. Consequently, we have studied apparent sorption and diffusion in a coal core under confining pressure. A core from the important bituminous coal Pittsburgh no. 8 was kept under a constant, 3D effective stress; the sample was scanned by X-ray computer tomography (CT) before, then while, it sorbed CO{sub 2}. Increases in sample density because of sorption were calculated from the CT images. Moreover, density distributions for small volume elements inside the core were calculated and analyzed. Qualitatively, the CT showed that gas sorption advanced at different rates in different regions of the core and that diffusion and sorption progressed slowly. The amounts of CO{sub 2} sorbed were plotted vs. position (at fixed times) and vs. time (for various locations in the sample). The resulting sorption isotherms were compared to isotherms obtained from powdered coal from the same Pittsburgh no. 8 extended sample. The results showed that for this single coal at specified times, the apparent sorption isotherms were dependent on position of the volume element in the core and the distance from the CO{sub 2} source. Also, the calculated isotherms showed that less CO{sub 2} was sorbed than by a powdered (and unconfined) sample of the coal. Changes in density distributions during the experiment were also observed. After desorption, the density distribution of calculated volume elements differed from the initial distribution, suggesting hysteresis and a possible rearrangement of coal structure because of CO{sub 2} sorption.

  19. Flash hydropyrolysis of coal. Quarterly report No. 11, October 1-December 31, 1979

    SciTech Connect (OSTI)

    Steinberg, M.; Fallon, P.; Bhatt, B.L.

    1980-02-01

    The following conclusions can be drawn from this work: (1) when the caking bituminous coals are used with diluents, only 20% Pittsburgh No. 8 coal can be added to the diluent swhile 40% Illinois No. 6 could be added due to the higher free swelling index of the Pittsburgh No. 8; (2) When limestone is used as a diluent, considerably more sulfur is retained in the char than when using sand; (3) when the char from an experiment using limestone is recycled as the diluent for another experiment, the char continually retains additional sulfur through at least three recycles; (4) decomposition of the limestone and reduction is indicated by the high concentrations of CO observed at 900/sup 0/C; (5) increasing the coal feed rate by a factor of 4 from 2.4 to 10.7 lb/hr at low H/sub 2//Coal ratios (approx. = 0.6) results in no appreciable change in gaseous HC yields (approx. = 27%) or concentration (approx. = 45%) but higher BTX yields (1.1% vs. 5.4%); (6) although only one experiment was conducted, it appears that hydrogasification of untreated New Mexico sub-bituminous coal at 950/sup 0/C does not give an increase in yield over hydrogasification at 900/sup 0/C; (7) the hydrogasification of Wyodak lignite gives approximately the same gaseous HC yields as that obtained from North Dakota lignite but higher BTX yields particularly at 900/sup 0/C and 1000 psi (9% vs. 2%); (8) treating New Mexico sub-bituminous coal with NaCO/sub 3/ does not increase its hydrogasification qualities between 600/sup 0/C and 900/sup 0/C at 1000 psi but does decrease the BTX yield.

  20. Post waterflood CO{sub 2} miscible flood in light oil, fluvial: Dominated deltaic reservoir. First quarterly technical progress report, Fiscal year 1994, October 1, 1993--December 31, 1993

    SciTech Connect (OSTI)

    Not Available

    1994-01-15

    Production from the Port Neches CO{sub 2} project was initiated on December 6, 1993 after having been shut-in since the start of CO{sub 2} injection on September 22, 1993 to allow reservoir pressure to build. Rates were established at 236 barrels of oil per day (BOPD) from two wells in the 235 acre waterflood project area, which before project initiation had produced only 80 BOPD from the entire area. These wells are flowing large amounts of fluid due to the high reservoir pressure and their oil percentages are increasing as a result of the CO{sub 2} contacting the residual oil. One well, the H. J. Kuhn No. 15-R is flowing 217 BOPD, 1139 BWPD, and 2500 MCFPD of CO{sub 2} at a flowing tubing pressure (FTP) of 890 psi. The other producing well, the H. J. Kuhn No. 33, is currently flowing 19 BOPD, 614 BWPD, and 15 MCFPD at a FTP of 400 psi. Unexpectedly high rates of CO{sub 2} production are being made from Well No. 15-R and from the W. R. Stark ``B`` No. 8. This No. 8 well produced 7 BOPD, 697 BWPD, and 15 MCFPD prior to being shut-in during September to allow for the reservoir pressure to build by injecting CO{sub 2}, but when opened on December 6, the well flowed dry CO{sub 2} at a rate of 400 MCFPD for a two day test period. More sustained production tests will be obtained after all wells are tied into the new production facility. Many difficulties occurred in the drilling of the horizontal CO{sub 2} injection well but a successful completion across 2501 of sand has finally been accomplished. A formation dip of 11--14 degrees in the area where the well was being drilled made the proposed 1500{prime} horizontal sand section too difficult to accomplish. The shale section directly above the sand caused sticking problems on two separate occasions resulting in two sidetracks of the well around stuck pipe. The well will be tied into the facility and CO{sub 2} injection into the well will begin before February 1, 1994.

  1. HIGH PRESSURE COAL COMBUSTON KINETICS PROJECT

    SciTech Connect (OSTI)

    Stefano Orsino

    2005-03-30

    As part of the U.S. Department of Energy (DoE) initiative to improve the efficiency of coal-fired power plants and reduce the pollution generated by these facilities, DOE has funded the High-Pressure Coal Combustion Kinetics (HPCCK) Projects. A series of laboratory experiments were conducted on selected pulverized coals at elevated pressures with the specific goals to provide new data for pressurized coal combustion that will help extend to high pressure and validate models for burnout, pollutant formation, and generate samples of solid combustion products for analyses to fill crucial gaps in knowledge of char morphology and fly ash formation. Two series of high-pressure coal combustion experiments were performed using SRI's pressurized radiant coal flow reactor. The first series of tests characterized the near burner flame zone (NBFZ). Three coals were tested, two high volatile bituminous (Pittsburgh No.8 and Illinois No.6), and one sub-bituminous (Powder River Basin), at pressures of 1, 2, and 3 MPa (10, 20, and 30 atm). The second series of experiments, which covered high-pressure burnout (HPBO) conditions, utilized a range of substantially longer combustion residence times to produce char burnout levels from 50% to 100%. The same three coals were tested at 1, 2, and 3 MPa, as well as at 0.2 MPa. Tests were also conducted on Pittsburgh No.8 coal in CO2 entrainment gas at 0.2, 1, and 2 MPa to begin establishing a database of experiments relevant to carbon sequestration techniques. The HPBO test series included use of an impactor-type particle sampler to measure the particle size distribution of fly ash produced under complete burnout conditions. The collected data have been interpreted with the help of CFD and detailed kinetics simulation to extend and validate devolatilization, char combustion and pollutant model at elevated pressure. A global NOX production sub-model has been proposed. The submodel reproduces the performance of the detailed chemical reaction

  2. Advanced In-Furnace NOx Control for Wall and Cyclone-Fired Boilers

    SciTech Connect (OSTI)

    Hamid Sarv

    2009-02-28

    A NO{sub x} minimization strategy for coal-burning wall-fired and cyclone boilers was developed that included deep air staging, innovative oxygen use, reburning, and advanced combustion control enhancements. Computational fluid dynamics modeling was applied to refine and select the best arrangements. Pilot-scale tests were conducted by firing an eastern high-volatile bituminous Pittsburgh No.8 coal at 5 million Btu/hr in a facility that was set up with two-level overfire air (OFA) ports. In the wall-fired mode, pulverized coal was burned in a geometrically scaled down version of the B and W DRB-4Z{reg_sign} low-NO{sub x} burner. At a fixed overall excess air level of 17%, NO{sub x} emissions with single-level OFA ports were around 0.32 lb/million Btu at 0.80 burner stoichiometry. Two-level OFA operation lowered the NO{sub x} levels to 0.25 lb/million Btu. Oxygen enrichment in the staged burner reduced the NO{sub x} values to 0.21 lb/million Btu. Oxygen enrichment plus reburning and 2-level OFA operation further curbed the NO{sub x} emissions to 0.19 lb/million Btu or by 41% from conventional air-staged operation with single-level OFA ports. In the cyclone firing arrangement, oxygen enrichment of the cyclone combustor enabled high-temperature and deeply staged operation while maintaining good slag tapping. Firing the Pittsburgh No.8 coal in the optimum arrangement generated 112 ppmv NO{sub x} (0.15 lb/million Btu) and 59 ppmv CO. The optimum emissions results represent 88% NO{sub x} reduction from the uncontrolled operation. Levelized costs for additional NO{sub x} removal by various in-furnace control methods in reference wall-fired or cyclone-fired units already equipped with single-level OFA ports were estimated and compared with figures for SCR systems achieving 0.1 lb NO{sub x}/10{sup 6} Btu. Two-level OFA ports could offer the most economical approach for moderate NO{sub x} control, especially for smaller units. O{sub 2} enrichment in combination with 2-level

  3. Removal of organic and inorganic sulfur from Ohio coal by combined physical and chemical process. Final report

    SciTech Connect (OSTI)

    Attia, Y.A.; Zeky, M.El.; Lei, W.W.; Bavarian, F.; Yu, S.

    1989-04-28

    This project consisted of three sections. In the first part, the physical cleaning of Ohio coal by selective flocculation of ultrafine slurry was considered. In the second part, the mild oxidation process for removal of pyritic and organic sulfur.was investigated. Finally, in-the third part, the combined effects of these processes were studied. The physical cleaning and desulfurization of Ohio coal was achieved using selective flocculation of ultrafine coal slurry in conjunction with froth flotation as flocs separation method. The finely disseminated pyrite particles in Ohio coals, in particular Pittsburgh No.8 seam, make it necessary to use ultrafine ({minus}500 mesh) grinding to liberate the pyrite particles. Experiments were performed to identify the ``optimum`` operating conditions for selective flocculation process. The results indicated that the use of a totally hydrophobic flocculant (FR-7A) yielded the lowest levels of mineral matters and total sulfur contents. The use of a selective dispersant (PAAX) increased the rejection of pyritic sulfur further. In addition, different methods of floc separation techniques were tested. It was found that froth flotation system was the most efficient method for separation of small coal flocs.

  4. Coal repository. Final report

    SciTech Connect (OSTI)

    Not Available

    1983-11-01

    The Coal Repository Project was initiated in 1980 by the Department of Energy/Pittsburgh Energy Technology Center to provide a centralized system for the collection of well characterized coal samples, and distribution to organizations involved in the chemical beneficiation of coal and related research. TRW Energy Development Group, together with its subcontractor Commercial Testing and Engineering Company, established the Coal Repository at the TRW Capistrano Chemical Facility, which is the location of the DOE-owned Multi-Use Fuel and Energy Processes Test Plant (MEP). Twenty tons each of three coals (Illinois No. 6, Kentucky No. 11 (West), and Pittsburgh No. 8 (from an Ohio mine)) were collected, characterized, and stored under a nitrogen atmosphere. Ten tons of each coal are 3/8-inch x 0, five tons of each are 14-mesh x 0, and five tons of each are 100-mesh x 0. Although TRW was within budget and on schedule, Department of Energy funding priorities in this area were altered such that the project was terminated prior to completion of the original scope of work. 9 figures, 3 tables.

  5. SHOCKED AND SCORCHED: THE TAIL OF A TADPOLE IN AN INTERSTELLAR POND

    SciTech Connect (OSTI)

    Sahai, R.; Morris, M. R.; Claussen, M. J.

    2012-05-20

    We report multi-wavelength observations of the far-infrared source IRAS 20324+4057, including high-resolution optical imaging with the Hubble Space Telescope, and ground-based near-infrared, millimeter-wave and radio observations. These data show an extended, limb-brightened, tadpole-shaped nebula with a bright, compact, cometary nebula located inside the tadpole head. Our molecular line observations indicate that the Tadpole is predominantly molecular with a total gas mass exceeding 3.7 M{sub Sun }. Our radio continuum imaging and archival Spitzer IRAC images show the presence of additional tadpole-shaped objects in the vicinity of IRAS 20324+4057 that share a common east-west head-tail orientation: we propose that these structures are small, dense molecular cores that originated in the Cygnus cloud and are now being (1) photoevaporated by the ultraviolet radiation field of the Cyg OB2 No. 8 cluster located to the northwest; and (2) shaped by ram pressure of a distant wind source or sources located to the west, blowing ablated and photoevaporated material from their heads eastward. The ripples in the tail of the Tadpole are interpreted in terms of instabilities at the interface between the ambient wind and the dense medium of the former.

  6. Novel microorganism for selective separation of coal from ash and pyrite. Second quarterly technical progress report, 1 December 1993--28 February 1994

    SciTech Connect (OSTI)

    Misra, M.; Smith, R.W.; Raichur, A.M.

    1994-05-01

    The objective of this project is to study the effectiveness of a novel hydrophobic microorganism, Mycobacterium phlei (M. phlei), for the selective flocculation of coal from pyrite and ash forming minerals. During the reporting period, the hydrophobicity of different coal samples was studied both in the presence and absence of M. phlei cells. In the absence of M. Phlei, Illinois No. 6 and Pennsylvania No. 8 exhibited higher contact angles as compared to Kentucky No. 9 coal. All the coal samples exhibited a maximum in contact angle around pH 5--7, which roughly coincides with the iso-electric point (iep) of different coals studied in this investigation. In the presence of M. phlei, maximum contact angle shifted to lower pH range of 2--3 which coincides with the iep of the M. phlei. These measurements reinforce the notion that good flocculation of coal with M. phlei can be achieved around pH 2--3. The amount of soluble fraction released during rupturing of M. phlei cells was studied as a function of sonication time. The rupturing experiments showed that the whole cells (unruptured cells) contain nearly 40% by weight of soluble fractions. Also, during the reporting period, the fabrication of the counter-current flocculation device was completed.

  7. Coal desulfurization by chlorinolysis: production and combustion-test evaluation of product coals. Final report

    SciTech Connect (OSTI)

    Kalvinskas, J.; Daly, D.

    1982-04-30

    Laboratory-scale screening tests were carried out on PSOC 276, Pittsburgh Coal from Harrison County, Ohio to establish chlorination and hydrodesulfurization conditions for the batch reactor production of chlorinolysis and chlorinolysis-hydrodesulfurized coals. In addition, three bituminous coals, Pittsburgh No. 8 from Greene County, PA, Illinois No. 6 from Jackson County, Illinois and Eagle No. 5 from Moffat County, Colorado were treated on the lab scale by the chlorinolysis process to provide 39 to 62% desulfurization. Two bituminous coals (PSOC 276, Pittsburgh Coal from Harrison County, Ohio and 282, Illinois No. 6 Coal from Jefferson County, Illinois) and one subbituminous coal (PSOC 230, Rosebud Coal fom Rosebud County, Montana) were then produced in 11 to 15 pound lots as chlorinolysis and hydrodesulfurized coals. The chlorinolysis coals had a desulfurization of 29 to 69%, reductions in volatiles (12 to 37%) and hydrogen (6 to 31%). Hydrodesulfurization provided a much greater desulfurization (56 to 86%), reductions in volatiles (77 to 84%) and hydrogen (56 to 64%). The three coals were combustion tested in the Penn State plane flame furance to determine ignition and burning characteristics. All three coals burned well to completion as: raw coals, chlorinolysis processed coals and hydrodesulfurized coals. The hydrodesulfurized coals experienced greater ignition delays and reduced burning rates than the other coals because of the reduced volatile content. It is thought that the increased open pore volume in the desulfurized-devolatilized coals compensates in part for the decreased volatiles effect on ignition and burning. 4 figures, 2 tables.

  8. Repowering with clean coal technologies

    SciTech Connect (OSTI)

    Freier, M.D.; Buchanan, T.L.; DeLallo, M.L.; Goldstein, H.N.

    1996-02-01

    Repowering with clean coal technology can offer significant advantages, including lower heat rates and production costs, environmental compliance, incremental capacity increases, and life extension of existing facilities. Significant savings of capital costs can result by refurbishing and reusing existing sites and infrastructure relative to a greenfield siting approach. This paper summarizes some key results of a study performed by Parsons Power Group, Inc., under a contract with DOE/METC, which investigates many of the promising advanced power generation technologies in a repowering application. The purpose of this study was to evaluate the technical and economic results of applying each of a menu of Clean Coal Technologies in a repowering of a hypothetical representative fossil fueled power station. Pittsburgh No. 8 coal is used as the fuel for most of the cases evaluated herein, as well as serving as the fuel for the original unrepowered station. The steam turbine-generator, condenser, and circulating water system are refurbished and reused in this study, as is most of the existing site infrastructure such as transmission lines, railroad, coal yard and coal handling equipment, etc. The technologies evaluated in this study consisted of an atmospheric fluidized bed combustor, several varieties of pressurized fluid bed combustors, several types of gasifiers, a refueling with a process derived fuel, and, for reference, a natural gas fired combustion turbine-combined cycle.

  9. Improved mechanical properties of A 508 class 3 steel for nuclear pressure vessel through steelmaking

    SciTech Connect (OSTI)

    Kim, J.T.; Kwon, H.K.; Kim, K.C.; Kim, J.M.

    1997-12-31

    The present work is concerned with the steelmaking practices which improve the mechanical properties of the A 508 class 3 steel for reactor pressure vessel. Three kinds of steelmaking practices were applied to manufacture the forged heavy wall shell for reactor pressure vessel, that is, the vacuum carbon deoxidation (VCD), modified VCD containing aluminum and silicon-killing. The segregation of the chemical elements through the thickness was quite small so that the variations of the tensile properties at room temperature were small and the anisotropy of the impact properties was hardly observed regardless of the steelmaking practices. The Charpy V-notch impact properties and the reference nil-ductile transition temperature by drop weight test were significantly improved by the modified VCD and silicon-killing as compared with those of the steel by VCD. Moreover, the plane strain fracture toughness values of the materials by modified VCD and silicon-killing practices was much higher than those of the steel by VCD. These were resulted from the fining of austenite grain size. It was observed that the grain size was below 20 {micro}m (ASTM No. 8.5) when using the modified VCD and silicon-killing, compared to 50 {micro}m (ASTM No. 7.0) when using VCD.

  10. ITER vacuum vessel fabrication plan and cost study (D 68) for the international thermonuclear experimental reactor

    SciTech Connect (OSTI)

    1995-01-01

    ITER Task No. 8, Vacuum Vessel Fabrication Plan and Cost Study (D68), was initiated to assess ITER vacuum vessel fabrication, assembly, and cost. The industrial team of Raytheon Engineers & Constructors and Chicago Bridge & Iron (Raytheon/CB&I) reviewed the current vessel basis and prepared a manufacturing plan, assembly plan, and cost estimate commensurate with the present design. The guidance for the Raytheon/CB&I assessment activities was prepared by the ITER Garching Work Site. This guidance provided in the form of work descriptions, sketches, drawings, and costing guidelines for each of the presently identified vacuum vessel Work Breakdown Structure (WBS) elements was compiled in ITER Garching Joint Work Site Memo (Draft No. 9 - G 15 MD 01 94-17-05 W 1). A copy of this document is provided as Appendix 1 to this report. Additional information and clarifications required for the Raytheon/CB&I assessments were coordinated through the US Home Team (USHT) and its technical representative. Design details considered essential to the Task 8 assessments but not available from the ITER Joint Central Team (JCT) were generated by Raytheon/CB&I and documented accordingly.

  11. Nucleic and amino acid sequences relating to a novel transketolase, and methods for the expression thereof

    DOE Patents [OSTI]

    Croteau, Rodney Bruce; Wildung, Mark Raymond; Lange, Bernd Markus; McCaskill, David G.

    2001-01-01

    cDNAs encoding 1-deoxyxylulose-5-phosphate synthase from peppermint (Mentha piperita) have been isolated and sequenced, and the corresponding amino acid sequences have been determined. Accordingly, isolated DNA sequences (SEQ ID NO:3, SEQ ID NO:5, SEQ ID NO:7) are provided which code for the expression of 1-deoxyxylulose-5-phosphate synthase from plants. In another aspect the present invention provides for isolated, recombinant DXPS proteins, such as the proteins having the sequences set forth in SEQ ID NO:4, SEQ ID NO:6 and SEQ ID NO:8. In other aspects, replicable recombinant cloning vehicles are provided which code for plant 1-deoxyxylulose-5-phosphate synthases, or for a base sequence sufficiently complementary to at least a portion of 1-deoxyxylulose-5-phosphate synthase DNA or RNA to enable hybridization therewith. In yet other aspects, modified host cells are provided that have been transformed, transfected, infected and/or injected with a recombinant cloning vehicle and/or DNA sequence encoding a plant 1-deoxyxylulose-5-phosphate synthase. Thus, systems and methods are provided for the recombinant expression of the aforementioned recombinant 1-deoxyxylulose-5-phosphate synthase that may be used to facilitate its production, isolation and purification in significant amounts. Recombinant 1-deoxyxylulose-5-phosphate synthase may be used to obtain expression or enhanced expression of 1-deoxyxylulose-5-phosphate synthase in plants in order to enhance the production of 1-deoxyxylulose-5-phosphate, or its derivatives such as isopentenyl diphosphate (BP), or may be otherwise employed for the regulation or expression of 1-deoxyxylulose-5-phosphate synthase, or the production of its products.

  12. STUDIES OF THE SPONTANEOUS COMBUSTION OF LOW RANK COALS AND LIGNITES

    SciTech Connect (OSTI)

    Joseph M. Okoh; Joseph N.D. Dodoo

    2005-07-26

    Spontaneous combustion has always been a problem in coal utilization especially in the storage and transportation of coal. In the United States, approximately 11% of underground coal mine fires are attributed to spontaneous coal combustion. The incidence of such fires is expected to increase with increased consumption of lower rank coals. The cause is usually suspected to be the reabsorption of moisture and oxidation. To understand the mechanisms of spontaneous combustion this study was conducted to (1) define the initial and final products during the low temperature (10 to 60 C) oxidation of coal at different partial pressures of O{sub 2}, (2) determine the rate of oxidation, and (3) measure the reaction enthalpy. The reaction rate (R) and propensity towards spontaneous combustion were evaluated in terms of the initial rate method for the mass gained due to adsorbed O{sub 2}. Equipment that was used consisted of a FT-IR (Fourier Transform-Infrared Spectrometer, Perkin Elmer), an accelerated surface area porosimeter (ASAP, Micromeritics model 2010), thermogravimetric analyzer (TGA, Cahn Microbalance TG 121) and a differential scanning calorimeter (DSC, Q1000, thermal analysis instruments). Their combination yielded data that established a relation between adsorption of oxygen and reaction enthalpy. The head space/ gas chromatograph/ mass spectrometer system (HS/GC/MS) was used to identify volatiles evolved during oxidation. The coal samples used were Beulah lignite and Wyodak (sub-bituminous). Oxygen (O{sub 2}) absorption rates ranged from 0.202 mg O{sub 2}/mg coal hr for coal sample No.20 (Beulah pyrolyzed at 300 C) to 6.05 mg O{sub 2}/mg coal hr for coal sample No.8 (wyodak aged and pyrolyzed at 300 C). Aging of coal followed by pyrolysis was observed to contribute to higher reaction rates. Reaction enthalpies ranged from 0.42 to 1580 kcal/gm/mol O{sub 2}.

  13. CO-PRODUCTION OF HYDROGEN AND ELECTRICITY USING PRESSURIZED CIRCULATING FLUIDIZED BED GASIFICATION TECHNOLOGY

    SciTech Connect (OSTI)

    Zhen Fan

    2006-05-30

    Foster Wheeler has completed work under a U.S. Department of Energy cooperative agreement to develop a gasification equipment module that can serve as a building block for a variety of advanced, coal-fueled plants. When linked with other equipment blocks also under development, studies have shown that Foster Wheeler's gasification module can enable an electric generating plant to operate with an efficiency exceeding 60 percent (coal higher heating value basis) while producing near zero emissions of traditional stack gas pollutants. The heart of the equipment module is a pressurized circulating fluidized bed (PCFB) that is used to gasify the coal; it can operate with either air or oxygen and produces a coal-derived syngas without the formation of corrosive slag or sticky ash that can reduce plant availabilities. Rather than fuel a gas turbine for combined cycle power generation, the syngas can alternatively be processed to produce clean fuels and or chemicals. As a result, the study described herein was conducted to determine the performance and economics of using the syngas to produce hydrogen for sale to a nearby refinery in a hydrogen-electricity co-production plant setting. The plant is fueled with Pittsburgh No. 8 coal, produces 99.95 percent pure hydrogen at a rate of 260 tons per day and generates 255 MWe of power for sale. Based on an electricity sell price of $45/MWhr, the hydrogen has a 10-year levelized production cost of $6.75 per million Btu; this price is competitive with hydrogen produced by steam methane reforming at a natural gas price of $4/MMBtu. Hence, coal-fueled, PCFB gasifier-based plants appear to be a viable means for either high efficiency power generation or co-production of hydrogen and electricity. This report describes the PCFB gasifier-based plant, presents its performance and economics, and compares it to other coal-based and natural gas based hydrogen production technologies.

  14. SOx-NOx-Rox Box{trademark} flue gas clean-up demonstration. Final report

    SciTech Connect (OSTI)

    1995-09-01

    The SNRB{trademark} Flue Gas Cleanup Demonstration Project was cooperatively funded by the U.S. Department of Energy (DOE), the Ohio Coal Development Office (OCDO), B&W, the Electric Power Research Institute (EPRI), Ohio Edison, Norton Chemical Process Products Company and the 3M Company. The SNRB{trademark} technology evolved from the bench and laboratory pilot scale to be successfully demonstrated at the 5-MWe field scale. Development of the SNRB{trademark} process at B&W began with pilot testing of high-temperature dry sorbent injection for SO{sub 2} removal in the 1960`s. Integration of NO{sub x} reduction was evaluated in the 1970`s. Pilot work in the 1980`s focused on evaluation of various NO{sub x} reduction catalysts, SO{sub 2} sorbents and integration of the catalyst with the baghouse. This early development work led to the issuance of two US process patents to B&W - No. 4,309,386 and No. 4,793,981. An additional patent application for improvements to the process is pending. The OCDO was instrumental in working with B&W to develop the process to the point where a larger scale demonstration of the technology was feasible. This report represents the completion of Milestone M14 as specified in the Work Plan. B&W tested the SNRB{trademark} pollution control system at a 5-MWe demonstration facility at Ohio Edison`s R. E. Burger Plant located near Shadyside, Ohio. The design and operation were influenced by the results from laboratory pilot testing at B&W`s Alliance Research Center. The intent was to demonstrate the commercial feasibility of the SNRB{trademark} process. The SNRB{trademark} facility treated a 30,000 ACFM flue gas slipstream from Boiler No. 8. Operation of the facility began in May 1992 and was completed in May 1993.

  15. SOx-NOx-Rox Box{trademark} flue gas clean-up demonstration. Final report

    SciTech Connect (OSTI)

    1995-09-01

    Babcock and Wilcox`s (B and W) SOx-NOx-Rox Box{trademark} process effectively removes SOx, NOx and particulate (Rox) from flue gas generated from coal-fired boilers in a single unit operation, a high temperature baghouse. The SNRB technology utilizes dry sorbent injection upstream of the baghouse for removal of SOx and ammonia injection upstream of a zeolitic selective catalytic reduction (SCR) catalyst incorporated in the baghouse to reduce NOx emissions. Because the SOx and NOx removal processes require operation at elevated gas temperatures (800--900 F) for high removal efficiency, high-temperature fabric filter bags are used in the baghouse. The SNRB technology evolved from the bench and laboratory pilot scale to be successfully demonstrated at the 5-MWe field scale. This report represents the completion of Milestone M14 as specified in the Work Plan. B and W tested the SNRB pollution control system at a 5-MWe demonstration facility at Ohio Edison`s R.E. Burger Plant located near Shadyside, Ohio. The design and operation were influenced by the results from laboratory pilot testing at B and W`s Alliance Research Center. The intent was to demonstrate the commercial feasibility of the SNRB process. The SNRB facility treated a 30,000 ACFM flue gas slipstream from Boiler No. 8. Operation of the facility began in May 1992 and was completed in May 1993. About 2,300 hours of high-temperature operation were achieved. The main emissions control performance goals of: greater than 70% SO{sub 2} removal using a calcium-based sorbent; greater than 90% NOx removal with minimal ammonia slip; and particulate emissions in compliance with the New Source Performance Standards (NSPS) of 0.03 lb/million Btu were exceeded simultaneously in the demonstration program when the facility was operated at optimal conditions. Testing also showed significant reductions in emissions of some hazardous air pollutants.

  16. Critical studies of the rapid pyrolysis and hydropyrolysis of coal. Final project report, January 1, 1977-June 30, 1982

    SciTech Connect (OSTI)

    Howard, J.B.; Peters, W.A.

    1982-09-01

    This report summarizes major findings from a study of the effects of reaction conditions on the rapid pyrolysis behavior of coal in inert and hydrogen atmospheres. The independent effects of final temperature (150 to 1100/sup 0/C), reaction time at final temperature (0 to 30 s), heating rate (10/sup 2/ to 10/sup 4/ /sup 0/C/s), total pressure (0.0001 to 100 atm), hydrogen partial pressure (0 to 69 atm), and particle size (45 to 1000 ..mu..m), on product yields and compositions were determined for a Montana lignite and a Pittsburgh No. 8 Seam bituminous coal. Kinetic data were obtained for formation of specific pyrolysis products from each coal. A new mass transfer model for rapid hydrogasification of softening coal was also formulated. Effects of native mineral matter and selected inorganic additives on the pyrolysis behavior of the Pittsburgh Seam coal and of a Wyodak subbituminous coal were also studied. Detailed project findings are included in papers appended to the main body of the report. Important results include: (1) temperature and residence time are major parameters in determining pyrolysis and hydropyrolysis behavior; (2) coal type is also important, since major differences are observed in the yields, compositions, and evolution kinetics of products from rapid pyrolysis of the bituminous coal and of the lignite; (3) hydrogen can react rapidly with decomposing coal during the early stages of pyrolysis and, under conditions minimizing the elevated temperature contacting of hydrogen and pyrolysis tars, methane accounts for most of the resulting increased conversion; (4) secondary reactions of tar have a major role in determining product yields, compositions, and evolution kinetics in pyrolysis of the bituminous coal; and (5) increased CO production and decreased tar evolution are obtained by treating the bituminous coal with lime or calcite before pyrolysis.

  17. Coal Cleaning Using Resonance Disintegration for Mercury and Sulfur Reduction Prior to Combustion

    SciTech Connect (OSTI)

    Andrew Lucero

    2005-04-01

    Coal-cleaning processes have been utilized to increase the heating value of coal by extracting ash-forming minerals in the coal. These processes involve the crushing or grinding of raw coal followed by physical separation processes, taking advantage of the density difference between carbonaceous particles and mineral particles. In addition to the desired increase in the heating value of coal, a significant reduction of the sulfur content of the coal fed to a combustion unit is effected by the removal of pyrite and other sulfides found in the mineral matter. WRI is assisting PulseWave to develop an alternate, more efficient method of liberating and separating the undesirable mineral matter from the carbonaceous matter in coal. The approach is based on PulseWave's patented resonance disintegration technology that reduces that particle size of materials by application of destructive resonance, shock waves, and vortex generating forces. Illinois No.5 coal, a Wyodak coal, and a Pittsburgh No.8 coal were processed using the resonance disintegration apparatus then subjected to conventional density separations. Initial microscopic results indicate that up to 90% of the pyrite could be liberated from the coal in the machine, but limitations in the density separations reduced overall effectiveness of contaminant removal. Approximately 30-80% of the pyritic sulfur and 30-50% of the mercury was removed from the coal. The three coals (both with and without the pyritic phase separated out) were tested in WRI's 250,000 Btu/hr Combustion Test Facility, designed to replicate a coal-fired utility boiler. The flue gases were characterized for elemental, particle bound, and total mercury in addition to sulfur. The results indicated that pre-combustion cleaning could reduce a large fraction of the mercury emissions.

  18. Development of the chemical and electrochemical coal cleaning (CECC) process. Final report

    SciTech Connect (OSTI)

    Yoon, Roe-Hoan; Basilio, C.I.

    1992-05-01

    The Chemical and Electrochemical Coal Cleaning (CECC) process developed at Virginia Polytechnic Institute and State University was studied further in this project. This process offers a new method of physically cleaning both low- and high-rank coals without requiring fine grinding. The CECC process is based on liberating mineral matter from coal by osmotic pressure. The majority of the work was conducted on Middle Wyodak, Pittsburgh No. 8 and Elkhorn No. 3 coals. The coal samples were characterized for a variety of physical and chemical properties. Parametric studies were then conducted to identify the important operating parameters and to establish the optimum conditions. In addition, fundamental mechanisms of the process were studied, including mineral matter liberation, kinetics of mineral matter and pyrite dissolution, ferric ion regeneration schemes and alternative methods of separating the cleaned coal from the liberated mineral matter. The information gathered from the parametric and fundamental studies was used in the design, construction and testing of a bench-scale continuous CECC unit. Using this unit, the ash content of a Middle Wyodak coal was reduced from 6.96 to 1.61% at a 2 lbs/hr throughput. With an Elkhorn No. 3 sample, the ash content was reduced from 9.43 to 1.8%, while the sulfur content was reduced from 1.57 to 0.9%. The mass balance and liberation studies showed that liberation played a more dominant role than the chemical dissolution in removing mineral matter and inorganic sulfur from the different bituminous coals tested. However, the opposite was found to be the case for the Wyodak coal since this coal contained a significant amount of acid-soluble minerals.

  19. Development of the chemical and electrochemical coal cleaning (CECC) process

    SciTech Connect (OSTI)

    Yoon, Roe-Hoan; Basilio, C.I.

    1992-05-01

    The Chemical and Electrochemical Coal Cleaning (CECC) process developed at Virginia Polytechnic Institute and State University was studied further in this project. This process offers a new method of physically cleaning both low- and high-rank coals without requiring fine grinding. The CECC process is based on liberating mineral matter from coal by osmotic pressure. The majority of the work was conducted on Middle Wyodak, Pittsburgh No. 8 and Elkhorn No. 3 coals. The coal samples were characterized for a variety of physical and chemical properties. Parametric studies were then conducted to identify the important operating parameters and to establish the optimum conditions. In addition, fundamental mechanisms of the process were studied, including mineral matter liberation, kinetics of mineral matter and pyrite dissolution, ferric ion regeneration schemes and alternative methods of separating the cleaned coal from the liberated mineral matter. The information gathered from the parametric and fundamental studies was used in the design, construction and testing of a bench-scale continuous CECC unit. Using this unit, the ash content of a Middle Wyodak coal was reduced from 6.96 to 1.61% at a 2 lbs/hr throughput. With an Elkhorn No. 3 sample, the ash content was reduced from 9.43 to 1.8%, while the sulfur content was reduced from 1.57 to 0.9%. The mass balance and liberation studies showed that liberation played a more dominant role than the chemical dissolution in removing mineral matter and inorganic sulfur from the different bituminous coals tested. However, the opposite was found to be the case for the Wyodak coal since this coal contained a significant amount of acid-soluble minerals.

  20. REDUCING PRODUCED WATER WITH DENSITY AND CONDUCTIVITY METERS

    SciTech Connect (OSTI)

    Jason T. Smith

    2004-08-01

    The work performed was an attempt to reduce the amount of produced water by using the well bore as an oil-water separator. The use of a flow meter, density meter and/or conductivity meter controlling a pumping unit would be used to achieve this goal. The natural physical differences between oil and water are easily detected inside the production stream with proper equipment. A coriolis mass meter, conductivity meter, data recorder, timer and relays were purchased and housed in a purpose-built field cabinet. The metering unit was hooked to four wells over the course of the project, Spencer No.8, Applegate Gray Unit No.1 (AGU No.1), Vollmer No.4 and Mohr No.1. All are located in the Illinois Basin, three with artificial lift pumps and one flowing well. Depth of producing formations ranges from a maximum of 846.13 m (2776 ft) to minimum of 316.69 m (1039 ft). All wells were completed in one formation of Mississippian or Pennsylvanian age. The data recorded were analyzed to determine what events could be detected. Events included pure oil or higher oil-cut fluid reaching the pump or reaching the metering equipment, the pump operating under capacity, and the well ''pumped down''. Based on how much oil and water is present in a fluid column, the pressure the fluid column imparts on a formation can be calculated. By knowing the amount of oil and water in a well bore and the maximum height water can reach, production equipment can be configured to only produce oil. However, the configuration may not be profitable. It became apparent during the course of this research the wells tested do not have an oil-water contact deep enough so traditional pumping equipment can be configured to recover oil by the proposed method. This method may work more successfully in deeper basins. Other interesting anomalies were also detected in the data.

  1. Pilot-Scale Demonstration of Pefi's Oxygenated Transportation Fuels Production Technology

    SciTech Connect (OSTI)

    2005-05-01

    Coal-cleaning processes have been utilized to increase the heating value of coal by extracting ash-forming minerals in the coal. These processes involve the crushing or grinding of raw coal followed by physical separation processes, taking advantage of the density difference between carbonaceous particles and mineral particles. In addition to the desired increase in the heating value of coal, a significant reduction of the sulfur content of the coal fed to a combustion unit is effected by the removal of pyrite and other sulfides found in the mineral matter. WRI is assisting PulseWave to develop an alternate, more efficient method of liberating and separating the undesirable mineral matter from the carbonaceous matter in coal. The approach is based on PulseWave's patented resonance disintegration technology that reduces that particle size of materials by application of destructive resonance, shock waves, and vortex generating forces. Illinois No.5 coal, a Wyodak coal, and a Pittsburgh No.8 coal were processed using the resonance disintegration apparatus then subjected to conventional density separations. Initial microscopic results indicate that up to 90% of the pyrite could be liberated from the coal in the machine, but limitations in the density separations reduced overall effectiveness of contaminant removal. Approximately 30-80% of the pyritic sulfur and 30-50% of the mercury was removed from the coal. The three coals (both with and without the pyritic phase separated out) were tested in WRI's 250,000 Btu/hr Combustion Test Facility, designed to replicate a coal-fired utility boiler. The flue gases were characterized for elemental, particle bound, and total mercury in addition to sulfur. The results indicated that pre-combustion cleaning could reduce a large fraction of the mercury emissions.

  2. Fuel Flexibility in Gasification

    SciTech Connect (OSTI)

    McLendon, T. Robert; Pineault, Richard L.; Richardson, Steven W.; Rockey, John M.; Beer, Stephen K.; Lui, Alain P.; Batton, William A.

    2001-11-06

    In order to increase efficiencies of carbonizers, operation at high pressures is needed. In addition, waste biomass fuels of opportunity can be used to offset fossil fuel use. The National Energy Technology Laboratory (NETL) Fluidized Bed Gasifier/Combustor (FBG/C) was used to gasify coal and mixtures of coal and biomass (sawdust) at 425 psig. The purpose of the testing program was to generate steady state operating data for modeling efforts of carbonizers. A test program was completed with a matrix of parameters varied one at a time in order to avoid second order interactions. Variables were: coal feed rate, pressure, and varying mixtures of sawdust and coal types. Coal types were Montana Rosebud subbituminous and Pittsburgh No. 8 bituminous. The sawdust was sanding waste from a furniture manufacturer in upstate New York. Coal was sieved from -14 to +60 mesh and sawdust was sieved to -14 mesh. The FBG/C operates at a nominal 425 psig, but pressures can be lowered. For the tests reported it was operated as a jetting, fluidized bed, ash-agglomerating gasifier. Preheated air and steam are injected into the center of the bottom along with the solid feed that is conveyed with cool air. Fairly stable reactor internal flow patterns develop and temperatures stabilize (with some fluctuations) when steady state is reached. At nominal conditions the solids residence time in the reactor is on the order of 1.5 to 2 hours, so changes in feed types can require on the order of hours to equilibrate. Changes in operating conditions (e.g. feed rate) usually require much less time. The operating periods of interest for these tests were only the steady state periods, so transient conditions were not monitored as closely. The test matrix first established a base case of operations to which single parameter changes in conditions could be compared. The base case used Montana Rosebud at a coal feed rate of 70 lbm/hr at 425 psig. The coal sawdust mixtures are reported as percent by weight

  3. Cementitious Grout for Closing SRS High Level Waste Tanks - 12315

    SciTech Connect (OSTI)

    Langton, C.A.; Stefanko, D.B.; Burns, H.H.; Waymer, J.; Mhyre, W.B.; Herbert, J.E.; Jolly, J.C. Jr.

    2012-07-01

    Savannah River Remediation (SRR) Closure Operations. Subsequent down selection was based on compressive strength and saturated hydraulic conductivity results. Fresh slurry property results were used as the first level of screening. A high range water reducing admixture and a viscosity modifying admixture were used to adjust slurry properties to achieve flowable grouts. Adiabatic calorimeter results were used as the second level screening. The third level of screening was used to design mixes that were consistent with the fill material parameters used in the F-Tank Farm Performance Assessment which was developed to assess the long-term fate and transport of residual contamination in the environment resulting from the operational closures. The cement and slag contents of a mix selected for filling Tanks 18-F and 19-F should be limited to no more than 125 and 210 lbs/cyd, respectively, to limit the heat generated as the result of hydration reaction during curing and thereby enable mass pour placement. Trial mixes with water to total cementitious materials ratios of 0.550 to 0.580 and 125 lbs/cyd of cement and 210 lbs/cyd of slag met the strength and permeability requirements. Mix LP no.8-16 was selected for closing SRS Tanks 18-F and 19-F because it meets or exceeds the design requirements with the least amount of Portland cement and blast furnace slag. This grout is expected to flow at least 45 feet. A single point of discharge should be sufficient for unrestricted flow conditions. However, additional entry points should be identified as back-up in case restrictions in the tank impede flow. The LP no.8 series of trial mixes had surprisingly high design compressive strengths (2000 to 4000/5000 psi) which were achieved at extended curing times (28 to 90 days, respectively) given the small amount of Portland cement in the mixes (100 to 185 lbs/cyd). The grouts were flowable structural fills containing 3/8 inch gravel and concrete sand aggregate. These grouts did not segregate

  4. FUNDAMENTAL INVESTIGATION OF FUEL TRANSFORMATIONS IN PULVERIZED COAL COMBUSTION AND GASIFICATION TECHNOLOGIES

    SciTech Connect (OSTI)

    Robert Hurt; Joseph Calo; Thomas Fletcher; Alan Sayre

    2003-01-01

    nano-dispersed vanadium, listed in decreasing order of importance. Catalytic effects play a very significant role in the oxidation of most practical solid fuel chars. Some degree of reactivity estimation is possible using only elemental analyses of parent fuels, but only if correlative techniques make use of the existing body of knowledge on the origin, form and dispersion of inorganic matter in various fuel classes. During the past year at BYU, work focused primarily on renovation of the BYU high pressure drop tube reactor (HPDT). This work has included design and testing of a flat-flame burner that can be operated at high pressure. A high-temperature, high-pressure gas profile has been achieved within this high-pressure flat-flame burner (HP-FFB). Detailed descriptions of the design and testing of the HP-FFB are given in this report. In addition, continued char reactivity experiments in the high pressure thermogravimetric analyzer (HP-TGA) have been performed on chars produced at different pressures in the HPDT. Results of the HP-TGA reactivity studies on a high-volatile A bituminous (Pittsburgh No.8) char are that intrinsic char activation energy increases with pyrolysis pressure, and that the oxygen order is roughly 0.9. These results are different than previous research on chars produced at atmospheric pressure. These new data show that the rate constant decreases with increasing pyrolysis pressure. However, the hydrogen content of the new chars produced at elevated pressures was fairly high ({approx}2 wt. %, daf), and char samples produced at higher temperatures are desired. During the next project year, experimental work on oxygen reactivity at high pressure will continue at BYU, and on CO{sub 2} reactivity at high pressure at Brown University. Selected chars produced at BYU under high pressure conditions will also be used at Brown for reactivity studies.

  5. Advanced High-Temperature, High-Pressure Transport Reactor Gasification

    SciTech Connect (OSTI)

    Michael L. Swanson

    2005-08-30

    The transport reactor development unit (TRDU) was modified to accommodate oxygen-blown operation in support of a Vision 21-type energy plex that could produce power, chemicals, and fuel. These modifications consisted of changing the loop seal design from a J-leg to an L-valve configuration, thereby increasing the mixing zone length and residence time. In addition, the standpipe, dipleg, and L-valve diameters were increased to reduce slugging caused by bubble formation in the lightly fluidized sections of the solid return legs. A seal pot was added to the bottom of the dipleg so that the level of solids in the standpipe could be operated independently of the dipleg return leg. A separate coal feed nozzle was added that could inject the coal upward into the outlet of the mixing zone, thereby precluding any chance of the fresh coal feed back-mixing into the oxidizing zone of the mixing zone; however, difficulties with this coal feed configuration led to a switch back to the original downward configuration. Instrumentation to measure and control the flow of oxygen and steam to the burner and mix zone ports was added to allow the TRDU to be operated under full oxygen-blown conditions. In total, ten test campaigns have been conducted under enriched-air or full oxygen-blown conditions. During these tests, 1515 hours of coal feed with 660 hours of air-blown gasification and 720 hours of enriched-air or oxygen-blown coal gasification were completed under this particular contract. During these tests, approximately 366 hours of operation with Wyodak, 123 hours with Navajo sub-bituminous coal, 143 hours with Illinois No. 6, 106 hours with SUFCo, 110 hours with Prater Creek, 48 hours with Calumet, and 134 hours with a Pittsburgh No. 8 bituminous coal were completed. In addition, 331 hours of operation on low-rank coals such as North Dakota lignite, Australian brown coal, and a 90:10 wt% mixture of lignite and wood waste were completed. Also included in these test campaigns was

  6. ZPR-3 Assembly 11 : A cylindrical sssembly of highly enriched uranium and depleted uranium with an average {sup 235}U enrichment of 12 atom % and a depleted uranium reflector.

    SciTech Connect (OSTI)

    Lell, R. M.; McKnight, R. D.; Tsiboulia, A.; Rozhikhin, Y.; National Security; Inst. of Physics and Power Engineering

    2010-09-30

    Over a period of 30 years, more than a hundred Zero Power Reactor (ZPR) critical assemblies were constructed at Argonne National Laboratory. The ZPR facilities, ZPR-3, ZPR-6, ZPR-9 and ZPPR, were all fast critical assembly facilities. The ZPR critical assemblies were constructed to support fast reactor development, but data from some of these assemblies are also well suited for nuclear data validation and to form the basis for criticality safety benchmarks. A number of the Argonne ZPR/ZPPR critical assemblies have been evaluated as ICSBEP and IRPhEP benchmarks. Of the three classes of ZPR assemblies, engineering mockups, engineering benchmarks and physics benchmarks, the last group tends to be most useful for criticality safety. Because physics benchmarks were designed to test fast reactor physics data and methods, they were as simple as possible in geometry and composition. The principal fissile species was {sup 235}U or {sup 239}Pu. Fuel enrichments ranged from 9% to 95%. Often there were only one or two main core diluent materials, such as aluminum, graphite, iron, sodium or stainless steel. The cores were reflected (and insulated from room return effects) by one or two layers of materials such as depleted uranium, lead or stainless steel. Despite their more complex nature, a small number of assemblies from the other two classes would make useful criticality safety benchmarks because they have features related to criticality safety issues, such as reflection by soil-like material. ZPR-3 Assembly 11 (ZPR-3/11) was designed as a fast reactor physics benchmark experiment with an average core {sup 235}U enrichment of approximately 12 at.% and a depleted uranium reflector. Approximately 79.7% of the total fissions in this assembly occur above 100 keV, approximately 20.3% occur below 100 keV, and essentially none below 0.625 eV - thus the classification as a 'fast' assembly. This assembly is Fast Reactor Benchmark No. 8 in the Cross Section Evaluation Working Group

  7. Worksheet

    U.S. Energy Information Administration (EIA) Indexed Site

    ;OH","AC",138,138,1433.6,"ACSR","Single",1,1,"Steel Tower",,0,0,0,0,0,"application/vnd.ms-excel" 2003,15143,"Platte River Power Authority",1,"Rawhide","Timberline West",100,31.63,"OH","AC",230,230,954,"ACSR","Single",2,2,"Steel/Tower & Pole",378,5553,1928767,2385430,251850,4571600,"application/vnd.ms-excel" 2003,15159,"Plymouth City of",1,"Mullet River Sub","Sub # 1",100,0.8,"OH","AC",138,138,336.4,"ACSR","SINGLE",1,1,"Steel Double Pole",33,0,0,0,1492139,1492139,"application/vnd.ms-excel" 2003,16534,"Sacramento Municipal Util Dist",1,"Natomas","Elverta",100,4.3,"OH","AC",230,230,954,"Aluminum","Single",1,1,"Steel Tower",316,0,0,0,0,0,"application/vnd.ms-excel" 2003,17543,"South Carolina Pub Serv Auth",1,"Rainey - Anderson (Duke) #1","Rainey - Anderson (Duke) #1",100,9.51,"OH","AC",230,230,1272,"ACSR","Double",2,2,"Steel / Tower",956,840152,1230361,1207282,22364,3300159,"application/vnd.ms-excel" 2003,17543,"South Carolina Pub Serv Auth",2,"Rainey - Anderson (Duke) #2","Rainey - Anderson (Duke) #2",100,9.51,"OH","AC",230,230,1272,"ACSR","Double",2,2,"Steel / Tower",956,840152,1230361,1207282,22364,3300159,"application/vnd.ms-excel" 2003,18642,"Tennessee Valley Authority",1,"West Ringgold","Center Point",100,7.94,"OH","AC",115,230,954,"ASCR","Single",1,2,"Steel Tower",,2086252,5658529,1502763,3053959,12301503,"application/vnd.ms-excel" 2003,18642,"Tennessee Valley Authority",2,"NE Johnson