Powered by Deep Web Technologies
Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Lighting Group: Sources and Ballasts: HID Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Ballasts and Controls for HID Lighting Ballasts and Controls for HID Lighting Systems Evaluation of Electronic Ballasts and Related Controls for HID Lighting Systems Objective HID ballast The goal of this project is to evaluate the potential of electronic ballasts and related controls for HID lighting systems to improve the efficiency of current technology. The specific objectives of this project are to: Test, analyze and determine the potential of electronic ballasts for HID lighting systems in cooperation with manufacturers as an emerging energy efficient technology to reduce lighting loads in commercial, industrial and municipal applications. Identify control strategies to further improve the energy efficiency of these systems with a municipal partner. Provide appropriate recommendations for incorporating these technologies into current state codes and regulations.

2

High-Intensity Discharge Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics August 15, 2013 - 5:59pm Addthis High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting. Illustration of a high-intensity discharge (HID) lIllustration amp. The lamp is a tall cylindrical shape, and a cutout of the outer tube shows the materials inside. A long, thin cylinder called the arc tube runs through the lamp between two electrodes. The space around the arc tube is labeled as a vacuum. In a high-intensity discharge lamp, electricity arcs between two electrodes, creating an intensely bright light. Mercury, sodium, or metal halide gas

3

HID Laboratories Inc | Open Energy Information  

Open Energy Info (EERE)

HID Laboratories Inc HID Laboratories Inc Jump to: navigation, search Name HID Laboratories, Inc. Place Menlo Park, California Zip 94025 Product HID Laboratories develops commercial-grade, high intensity lighting products that manage lighting demand and reduce energy use. References HID Laboratories, Inc.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. HID Laboratories, Inc. is a company located in Menlo Park, California . References ↑ "HID Laboratories, Inc." Retrieved from "http://en.openei.org/w/index.php?title=HID_Laboratories_Inc&oldid=346520" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages

4

New and Underutilized Technology: HID Electronic/Dimming Ballasts |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HID Electronic/Dimming Ballasts HID Electronic/Dimming Ballasts New and Underutilized Technology: HID Electronic/Dimming Ballasts October 7, 2013 - 8:51am Addthis The following information outlines key deployment considerations for HID electronic/dimming ballasts within the Federal sector. Benefits Most HID electronic/dimming ballasts, typically metal halide or high-pressure sodium lamps, are currently driven by magnetic ballasts. Several manufacturers now offer electronic ballasts for these lamps, which promise better efficiency, longer lamp life, and faster startup and re-strike. Application HID electronic/dimming ballasts are applicable in exterior/security lighting and facilities with high bay areas. Key Factors for Deployment Federal agencies must evaluate relative costs, benefits, and application of

5

Performance of "Ultra-High" Efficient Electronic Ballast for HID Lamps  

E-Print Network (OSTI)

. Index Terms--Electronic ballast, HID lamps, resonant inverter, power loss modeling, Silicon Carbide (Si of >95% for the ballast. Diode bridge rectifier EMI filter Resonant Inverter Power Factor Correction 75423, USA Abstract--A new electronic ballast circuit for High Intensity Discharge (HID) lamps

Tolbert, Leon M.

6

Large area, surface discharge pumped, vacuum ultraviolet light source  

DOE Patents (OSTI)

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source is disclosed. A contamination-free VUV light source having a 225 cm{sup 2} emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm{sup 2} at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing. 3 figs.

Sze, R.C.; Quigley, G.P.

1996-12-17T23:59:59.000Z

7

Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium vapor lamps, ultraviolet and  

E-Print Network (OSTI)

Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium vapor lamps, ultraviolet and HID (high-intensity discharge) lamps and all other mercury containing labeled for shipment to a recycling plant for mercury, glass and aluminum recovery. The beneficial re

Baker, Chris I.

8

T-547: Microsoft Windows Human Interface Device (HID) Vulnerability |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

547: Microsoft Windows Human Interface Device (HID) Vulnerability 547: Microsoft Windows Human Interface Device (HID) Vulnerability T-547: Microsoft Windows Human Interface Device (HID) Vulnerability February 1, 2011 - 3:20am Addthis PROBLEM Microsoft Windows Human Interface Device (HID) Vulnerability. PLATFORM: Microsoft 2003 SP2, Vista SP2, 2008 SP2, XP SP3, 7; and prior service packs ABSTRACT: Microsoft Windows does not properly warn the user before enabling additional Human Interface Device (HID) functionality over USB, which allows user-assisted attackers to execute arbitrary programs via crafted USB data, as demonstrated by keyboard and mouse data sent by malware on a Smartphone that the user connected to the computer. reference LINKS: Security Lab: Reference CVE-2011-0638 CVE Details: Reference CVE-2011-0638 Mitre Reference: CVE-2011-0638

9

Universal Lighting Technologies | Open Energy Information  

Open Energy Info (EERE)

Zip: 37214-3683 Product: Universal Lighting Technologies develops, manufactures and markets energy efficient lighting technologies including HID, CFLs and ballasts....

10

L&E: Adopt high-efficiency lighting for your parking lot | The Better  

NLE Websites -- All DOE Office Websites (Extended Search)

lot lot Activities Technology Solutions Teams Lighting & Electrical Space Conditioning Plug & Process Loads Food Service Refrigeration Laboratories Energy Management & Information Systems Public Sector Teams Market Solutions Teams Adopt high-efficiency lighting for your parking lot Most parking lots are illuminated by older high-intensity discharge (HID) lighting technology without any energy-saving controls. New light-emitting diode (LED) technology can cut parking lot lighting energy bills by 40%, or much more with controls, while delivering additional benefits including long life, reduced maintenance costs, and improved lighting uniformity. The Lighting & Electrical team developed a performance specification to help building owners take advantage of these improved lighting

11

GRR/Section 14-HI-d - Section 401 Water Quality Certification | Open Energy  

Open Energy Info (EERE)

HI-d - Section 401 Water Quality Certification HI-d - Section 401 Water Quality Certification < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-HI-d - Section 401 Water Quality Certification 14HID - Section401WaterQualityCertification (1).pdf Click to View Fullscreen Contact Agencies Hawaii Department of Health Clean Water Branch United States Environmental Protection Agency Regulations & Policies Clean Water Act (33 U.S.C. 1251) Section 401 Hawaii Administrative Rules Title 11, Chapter 54 Triggers None specified Click "Edit With Form" above to add content 14HID - Section401WaterQualityCertification (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

12

GRR/Section 18-HI-d - Variance from Pollution Control | Open Energy  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » GRR/Section 18-HI-d - Variance from Pollution Control < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 18-HI-d - Variance from Pollution Control 18HID - VarianceFromPollutionControl (4).pdf Click to View Fullscreen Contact Agencies Hawaii Department of Health Clean Water Branch Regulations & Policies Wastewater Systems Triggers None specified Click "Edit With Form" above to add content 18HID - VarianceFromPollutionControl (4).pdf Error creating thumbnail: Page number not in range.

13

GRR/Section 3-HI-d - Use and Occupancy Permit | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 3-HI-d - Use and Occupancy Permit GRR/Section 3-HI-d - Use and Occupancy Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 3-HI-d - Use and Occupancy Permit 03HIDUseAndOccupancyPermit.pdf Click to View Fullscreen Contact Agencies Hawaii Department of Transportation Highways Division Regulations & Policies Hawaii Administrative Rules Title 19, Chapter 102 Hawaii Administrative Rules Title 19, Chapter 105 Triggers None specified Click "Edit With Form" above to add content 03HIDUseAndOccupancyPermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative A developer needs a Use and Occupancy Permit from the Hawaii Department of

14

GRR/Section 6-HI-d - Other Overview | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » GRR/Section 6-HI-d - Other Overview < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 6-HI-d - Other Overview 06HIDOtherOverview.pdf Click to View Fullscreen Triggers None specified Click "Edit With Form" above to add content 06HIDOtherOverview.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Add Text Print PDF Retrieved from "http://en.openei.org/w/index.php?title=GRR/Section_6-HI-d_-_Other_Overview&oldid=685852"

15

A Light Effect in Chlorine under Electric Discharge : Influence of the Intensity and Frequency  

Science Journals Connector (OSTI)

... as the various electrical quantities ; the electrode spacing, area and 'ageing' under the discharge ; the nature of the gas, its temperature and especially the pressure. The chief ... ; a deflexion of 54 served to indicate the current. On irradiation by the carbon arc, the current decreased by 20-21 or about 38 per cent (see table); ...

S. S. JOSHI; P. G. DEO

1943-05-15T23:59:59.000Z

16

GRR/Section 6-HI-d - Oversize and/or Overweight Vehicles and Loads Permit |  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » GRR/Section 6-HI-d - Oversize and/or Overweight Vehicles and Loads Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections or Overweight Vehicles and Loads Permit Flowchart Narrative Content Here Print PDF Retrieved from "http://en.openei.org/w/index.php?title=GRR/Section_6-HI-d_-_Oversize_and/or_Overweight_Vehicles_and_Loads_Permit&oldid=685849" Categories: Regulatory Roadmap Overview Sections Geothermal Regulatory Roadmap Sections What links here Related changes Special pages

17

General Electric Lighting The last couple months at General Electric Lighting have been very exciting. In addition to the  

E-Print Network (OSTI)

a high voltage is applied to them, a plasma arc is formed, and the intense heat causes the electrons. I am still currently in the High Intensity Discharge (HID) division, working on a new outdoor lamp amounts of these elements are used to carefully control the color balance of the lamp. For example, sodium

Rollins, Andrew M.

18

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Intensity Discharge Lamps High-Intensity Discharge Lamps Sign up for e-mail updates on regulations for this and other products There are currently no energy conservation standards for high-intensity discharge (HID) lamps. HID lamps are electric discharge lamps and include high-pressure sodium, mercury vapor, and metal halide lamps. HID lamps require an HID ballast to start and regulate electric current flow through the lamp. HID lamps are used in street and roadway lighting, area lighting such as for parking lots and plazas, industrial and commercial building interior lighting, security lighting for commercial, industrial, and residential spaces, and landscape lighting. The Standards and Test Procedures for this product are related to Rulemaking for High Intensity Discharge Lamps Energy Conservation Standard and Rulemaking for High Intensity Discharge Lamps Test Procedures.

19

The impact of modern headlamps on the design of sag vertical curves  

E-Print Network (OSTI)

to the lens. The housing serves as a reflector and lens, and is made of plastic. These lamps may be comprised of different light emitting diode?s (LEDs), high intensity discharge (HID) lamps, and halogen lamps. Halogen headlamps are further comprised... on. HID lamps produce more light compared to halogen lamps (22). Also, HID lamps have a sharper horizontal cut-off beam pattern further reducing the portion of lighted highway on sag curves (25). Light emitting diode is another headlamp...

Gogula, Madhuri

2006-08-16T23:59:59.000Z

20

Coldwater Board of Public Utilities - Commercial and Industrial Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coldwater Board of Public Utilities - Commercial and Industrial Coldwater Board of Public Utilities - Commercial and Industrial Lighting Rebate Program Coldwater Board of Public Utilities - Commercial and Industrial Lighting Rebate Program < Back Eligibility Commercial Industrial Local Government Multi-Family Residential Nonprofit Savings Category Other Appliances & Electronics Commercial Lighting Lighting Manufacturing Heating & Cooling Commercial Heating & Cooling Cooling Buying & Making Electricity Maximum Rebate 50% of Project Cost Cannot exceed 100% of a single energy efficient measure's cost. Program Info State Michigan Program Type Utility Rebate Program Rebate Amount Custom: Not Specified Lighting Fluorescent Lighting: $2 - $50/fixture HID Lighting: $20 - $25/fixture Induction Bulb: $10 Metal Halide PAR Bulb: $20

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

L&E - high efficiency lighting for parking structure | The Better Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

structure structure Activities Technology Solutions Teams Lighting & Electrical Space Conditioning Plug & Process Loads Food Service Refrigeration Laboratories Energy Management & Information Systems Public Sector Teams Market Solutions Teams Adopt high-efficiency lighting for your parking structure Parking structures and garages are typically lighted by older HID lighting technology without any energy-saving controls. The latest high-efficiency alternatives with energy-saving controls-including light-emitting diode (LED), induction, and fluorescent technology options-can save building owners over 40% on their parking lot lighting bills while delivering additional benefits such as better-lighted spaces. The Lighting & Electrical team developed a performance specification that

22

Lighting  

SciTech Connect

The lighting section of ASHRAE standard 90.1 is discussed. It applies to all new buildings except low-rise residential, while excluding specialty lighting applications such as signage, art exhibits, theatrical productions, medical and dental tasks, and others. In addition, lighting for indoor plant growth is excluded if designed to operate only between 10 p.m. and 6 a.m. Lighting allowances for the interior of a building are determined by the use of the system performance path unless the space functions are not fully known, such as during the initial stages of design or for speculative buildings. In such cases, the prescriptive path is available. Lighting allowances for the exterior of all buildings are determined by a table of unit power allowances. A new addition the exterior lighting procedure is the inclusion of facade lighting. However, it is no longer possible to trade-off power allotted for the exterior with the interior of a building or vice versa. A significant change is the new emphasis on lighting controls.

McKay, H.N. (Hayden McKay Lighting Design, New York, NY (US))

1990-02-01T23:59:59.000Z

23

190 IEEE TRANSACTIONS ON PLASMA SCIENCE, VOL. 30, NO. 1, FEBRUARY 2002 Gap Closure in a Cold Metal Halide Lamp  

E-Print Network (OSTI)

lamp has been investigated using a two-dimensional, plasma transport model. Im- ages are presented- charge devices, lighting, plasma applications. METAL halide high-intensity-discharge (HID) lamps op- erate as high-pressure thermal arcs [1]. The cold fills of HID lamps are typically 50­100 torr of a rare

Kushner, Mark

24

Light  

Science Journals Connector (OSTI)

Sunlight contains energy which can be directly converted into electricity in solar cells of various types. This is an example of what is called 'direct conversion', involving no moving parts or heat conversion processes. This chapter looks at photovoltaic and photoelectric devices and also at other ideas for using light energy, some of which operate in the infrared part of the spectrum. Solar electric power is a rapidly developing field, opening up many opportunities for novel applications, as well as requirements, including for storage, with one idea being solar-powered hydrogen production and then direct conversion to electricity in fuel cells. Direct conversion is not always efficient, and this chapter introduces the concept of 'energy return on energy invested'. In speculative mood this chapter also looks at the idea of a global grid, allowing daytime solar generation to be used on the night side of the planet.

David Elliott ? Pages 4-1 to 4-20

25

Steam in the Ring Discharge  

Science Journals Connector (OSTI)

The behaviour of steam and its decomposition products in the ring discharge has been examined. Dry hydrogen is not dissociated. The production of atomic hydrogen is dependent upon the presence of steam which dissociates into hydroxyl and atomic hydrogen. A secondary source of atomic hydrogen is then afforded by the interaction of hydroxyl with molecular hydrogen. The escape from the discharge of atomic hydrogen, a long-lived species, favours the dissociation of steam. Mercury vapour, on the other hand, inhibits the formation of atomic hydrogen and thus leads to a high equilibrium steam concentration. Unlike dry hydrogen, dry oxygen is dissociated into atoms, but these have a short life as such and recombine in the discharge to form molecular oxygen and ozone. The reaction mechanisms occurring in the discharge are discussed in the light of spectrographic results.

G I Finch

1949-01-01T23:59:59.000Z

26

Powerful glow discharge excilamp  

DOE Patents (OSTI)

A powerful glow discharge lamp comprising two coaxial tubes, the outer tube being optically transparent, with a cathode and anode placed at opposite ends of the tubes, the space between the tubes being filled with working gas. The electrodes are made as cylindrical tumblers placed in line to one other in such a way that one end of the cathode is inserted into the inner tube, one end of the anode coaxially covers the end of the outer tube, the inner tube penetrating and extending through the anode. The increased electrodes' surface area increases glow discharge electron current and, correspondingly, average radiation power of discharge plasma. The inner tube contains at least one cooling liquid tube placed along the axis of the inner tube along the entire lamp length to provide cathode cooling. The anode has a circumferential heat extracting radiator which removes heat from the anode. The invention is related to lighting engineering and can be applied for realization of photostimulated processes under the action of powerful radiation in required spectral range.

Tarasenko, Victor F. (Tomsk, RU); Panchenko, Aleksey N. (Tomsk, RU); Skakun, Victor S. (Tomsk, RU); Sosnin, Edward A. (Tomsk, RU); Wang, Francis T. (Danville, CA); Myers, Booth R. (Livermore, CA); Adamson, Martyn G. (Danville, CA)

2002-01-01T23:59:59.000Z

27

Oscillations in glow discharges  

E-Print Network (OSTI)

OSCILLATIONS IN GLOW DISCHARGES A Dissertation By Tom Prickett, Jr. June 1950 Approved as to style and content by Chairman of Committee OSCILLATIONS IN GLOW DISCHARGES A Dissertation By Tom Prickett, Jr* June 1950 OSCILLATIONS IN GLOW... 1950 CONTENTS Introduction ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1 I. Review of Plasma Oscillations in Gas Discharges ? . . 2 II. Review of Relaxation Processes in Gas Discharges ? . 13 III. Report of Laboratory Investigation...

Prickett, Tom

1950-01-01T23:59:59.000Z

28

Independence Power and Light - Commercial Energy Efficiency Rebate Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Independence Power and Light - Commercial Energy Efficiency Rebate Independence Power and Light - Commercial Energy Efficiency Rebate Program Independence Power and Light - Commercial Energy Efficiency Rebate Program < Back Eligibility Commercial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Appliances & Electronics Commercial Lighting Lighting Maximum Rebate $20,000, or 30% of the total project cost annually per organization Program Info State Missouri Program Type Utility Rebate Program Rebate Amount High Performance T-8 Systems: $20-$30 Reduced-Wattage T-8 Systems: $20-$30 Standard T-8 Lamp: $2 Standard T-8 Electric Ballast: $10 400W HID Replacement (250W or less T8, T5, or T5HO Fluorescent): $75 Pulse Start Metal Halide Fixture: $50

29

Direct Discharge Permit (Vermont)  

Energy.gov (U.S. Department of Energy (DOE))

A direct discharge permit is required if a project involves the discharge of pollutants to state waters. For generation purposes, this involves the withdrawal of surface water for cooling purposes...

30

Nonsputtering impulse magnetron discharge  

SciTech Connect

Experiments with quasi-steady high-current discharges in crossed E Multiplication-Sign B fields in various gases (Ar, N{sub 2}, H{sub 2}, and SF{sub 6}) and gas mixtures (Ar/SF{sub 6} and Ar/O{sub 2}) at pressures from 10{sup -3} to 5 Torr in discharge systems with different configurations of electric and magnetic fields revealed a specific type of stable low-voltage discharge that does not transform into an arc. This type of discharge came to be known as a high-current diffuse discharge and, later, a nonsputtering impulse magnetron discharge. This paper presents results from experimental studies of the plasma parameters (the electron temperature, the plasma density, and the temperature of ions and atoms of the plasma-forming gas) of a high-current low-pressure diffuse discharge in crossed E Multiplication-Sign B fields.

Khodachenko, G. V.; Mozgrin, D. V.; Fetisov, I. K.; Stepanova, T. V. [National Research Nuclear University Moscow Engineering Physics Institute (Russian Federation)

2012-01-15T23:59:59.000Z

31

Silane discharge ion chemistry  

SciTech Connect

Silane dc, rf, and dc proximity discharges have been studied using mass spectroscopic measurements of the positive ions as a detailed diagnostic for the type of discharge used to produce hydrogenated amorphous silicon solar photovoltaic cells. The properties and quality of these films depends in a very complex way upon the interactions of the many reactive neutral and ion species in the discharge. Qualitative models of the ion chemical processes in these discharges have been developed from experimental measurements. Knowledge of the ion-molecule and electron-molecule collision cross sections is important to any attempt at understanding silane discharge chemistry. Consequently, the electron impact ionization cross sections for silane and disilane have been measured and for comparison purposes also for methane and ethane. In addition, the rate coefficients for charge exchange reactions of He , Ne , and Ar with silane, disilane, methane, and ethane have been measured as these are important to understanding discharges in inert gas-silane mixtures. A detailed quantitative model of the cathode sheath region of a silane dc discharge has been developed by extending the best recent calculation of the electron motion in the sheath to a self-consistent form which includes the ion motion. This model is used with comparison of silane dc discharge data to diagnose the ion chemistry occurring in the sheath region of silane dc discharge. The understanding of the discharge ion chemical processes that have been gained in this study represent an important step toward understanding the chemical and physical processes leading to film growth.

Chatham, R.H. III

1984-01-01T23:59:59.000Z

32

Glow discharge detector  

DOE Patents (OSTI)

A highly sensitive electronic ion cell for the measurement of trace elements in He carrier gas which involves glow discharge. A constant wave (CW) glow discharge detector which is controlled through a biased resistor, can detect the change of electron density caused by impurities in the He carrier gas by many orders of magnitude larger than that caused by direct ionization or electron capture. The glow discharge detector utilizes a floating pseudo-electrode to form a probe in or near the plasma. By using this probe, the large variation of electron density due to trace amounts of impurities can be directly measured.

Koo, Jackson C. (San Ramon, CA); Yu, Conrad M. (Antioch, CA)

2002-01-01T23:59:59.000Z

33

(Gas discharges and applications)  

SciTech Connect

The traveler attended the Ninth International Conference on Gas Discharges and Their Applications, which was held in Venice, Italy, on September 19--23, 1988; presented two papers, (1) Ion Chemistry in SF{sub 6} Corona'' and (2) Production of S{sub 2}F{sub 10} by SF{sub 6} Spark Discharge''; and participated in numerous discussions with conference participants on gas discharges related to his work on SF{sub 6}. The traveler visited the Centre de Physique Atomique at the University Paul Sabatier in Toulouse, France, to discuss with Dr. J. Casanovas his work on SF{sub 6} decomposition. Following that visit, the traveler visited the Laboratoire de Photoelectricite at the University of Dijon to discuss with Dr. J.-P. Goudonnet his work on surface studies and on the use of tunneling electron spectroscopy for the chemical analysis of surfaces.

Sauers, I.

1988-10-04T23:59:59.000Z

34

PERIODIC GLOW DISCHARGE REPORT  

NLE Websites -- All DOE Office Websites (Extended Search)

GLOW DISCHARGE REPORT GLOW DISCHARGE REPORT TIME: Jan 11 2014 11:29:09:000PM Power Supply ON/OFF Status OFF Power Supply Fault Status FAULT Power Supply Standby Status ON Power Supply Interlock Status NOT OK HV Power Resistors Status NORMAL Power Supply Voltage 52.00 Power Supply Current -71.00 Electrode 1 Voltage -15.00 Electrode 1 Current -79.00 Electrode 2 Voltage -14.00 Electrode 2 Current -70.00 ROSS 1 Status OPEN ROSS 2 Status OPEN ROSS 1 Common Line OPEN ROSS 2 Common Line OPEN IGBT1 Enable DISABLE IGBT2 Enable DISABLE

35

Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Basics Lighting Basics Lighting Basics August 15, 2013 - 5:12pm Addthis Text Version There are many different types of artificial lights, all of which have different applications and uses. Types of lighting include: Fluorescent Lighting High-intensity Discharge Lighting Incandescent Lighting LED Lighting Low-pressure Sodium Lighting. Which type is best depends on the application. See the chart below for a comparison of lighting types. Lighting Comparison Chart Lighting Type Efficacy (lumens/watt) Lifetime (hours) Color Rendition Index (CRI) Color Temperature (K) Indoors/Outdoors Fluorescent Straight Tube 30-110 7000-24,000 50-90 (fair to good) 2700-6500 (warm to cold) Indoors/outdoors Compact Fluorescent 50-70 10,000 65-88 (good) 2700-6500 (warm to cold) Indoors/outdoors

36

Water Pollutant Discharge Act (Illinois)  

Energy.gov (U.S. Department of Energy (DOE))

The discharge of oil in quantities which exceed the standards adopted by the Pollution Control Board, or the discharge of other pollutants directly or indirectly into the waters is prohibited....

37

High intensity discharge device containing oxytrihalides  

DOE Patents (OSTI)

A fill composition for a high intensity discharge device including mercury, niobium oxytrihalide, and a molecular stabilization agent is provided. The molar ratio of niobium oxytrihalide to the molecular stabilization agent in the fill is in the range of from about 5:1 to about 7.5:1. Niobium oxytrihalide is present in the fill in sufficient amount to produce, by dissociation in the discharge, atomic niobium, niobium oxide, NbO, and niobium dioxide, NbO[sub 2], with the molar ratio of niobium-containing vapor species to mercury in the fill being in the range of from about 0.01:1 to about 0.50:1; and mercury pressure of about 1 to about 50 atmospheres at lamp operating temperature. There is also provided a high intensity discharge device comprising a sealed light-transmissive arc tube; the arc tube including the above-described fill; and an energizing means for producing an electric discharge within the arc tube. 7 figs.

Lapatovich, W.P.; Keeffe, W.M.; Liebermann, R.W.; Maya, J.

1987-06-09T23:59:59.000Z

38

High intensity discharge device containing oxytrihalides  

DOE Patents (OSTI)

A fill composition for a high intensity discharge device including mercury, niobium oxytrihalide, and a molecular stabilization agent is provided. The molar ratio of niobium oxytrihalide to the molecular stabilization agent in the fill is in the range of from about 5:1 to about 7.5:1. Niobium oxytrihalide is present in the fill in sufficient amount to produce, by dissociation in the discharge, atomic niobium, niobium oxide, NbO, and niobium dioxide, NbO.sub.2, with the molar ratio of niobium-containing vapor species to mercury in the fill being in the range of from about 0.01:1 to about 0.50:1; and mercury pressure of about 1 to about 50 atmospheres at lamp operating temperature. There is also provided a high intensity discharge device comprising a sealed light-transmissive arc tube; the arc tube including the above-described fill; and an energizing means for producing an electric discharge within the arc tube.

Lapatovich, Walter P. (Hudson, MA); Keeffe, William M. (Rockport, MA); Liebermann, Richard W. (Danvers, MA); Maya, Jakob (Brookline, MA)

1987-01-01T23:59:59.000Z

39

A SPICE Compatible Model of High Intensity Discharge Lamps  

E-Print Network (OSTI)

from the arc's * Corresponding author behavior of HID lamps. This model are derived from the arc-linear resistance of the lamp, is the global specific conductance of the plasma, V is the volume of the plasma, L is the length of plasma and S is the cross section. ~ Vin G1 Lamp Model Ballast v(lamp) i(lamp) Analytical

40

Office of Environmental Health and Safety The University of Texas at Austin  

E-Print Network (OSTI)

202 Austin, Texas 78712 (512) 471-3511; Fax: (512) 471-6918 INFO SHEET Fluorescent Light Bulb Disposal such as small lamps, mercury vapor lamps, and other odd shaped fluorescent tubes. In the case of smaller bulbs Used Fluorescent, high intensity discharge (HID), and UV germicidal lamps are considered a hazardous

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Large discharge-volume, silent discharge spark plug  

DOE Patents (OSTI)

A large discharge-volume spark plug for providing self-limiting microdischarges. The apparatus includes a generally spark plug-shaped arrangement of a pair of electrodes, where either of the two coaxial electrodes is substantially shielded by a dielectric barrier from a direct discharge from the other electrode, the unshielded electrode and the dielectric barrier forming an annular volume in which self-terminating microdischarges occur when alternating high voltage is applied to the center electrode. The large area over which the discharges occur, and the large number of possible discharges within the period of an engine cycle, make the present silent discharge plasma spark plug suitable for use as an ignition source for engines. In the situation, where a single discharge is effective in causing ignition of the combustible gases, a conventional single-polarity, single-pulse, spark plug voltage supply may be used.

Kang, Michael (Los Alamos, NM)

1995-01-01T23:59:59.000Z

42

Microsoft Word - Groundwater Discharge Permit  

NLE Websites -- All DOE Office Websites (Extended Search)

State Renews Groundwater Discharge Permit for WIPP CARLSBAD, N.M., September 11, 2008 - The New Mexico Environment Department (NMED) has renewed the U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) groundwater discharge permit until 2013. The permit regulates the discharge of water from WIPP facilities and operations to lined ponds, which protect groundwater resources. The permit allows WIPP to discharge domestic wastewater, non-hazardous wastewater and storm water into 13 on-site, synthetically-lined ponds. The new permit also provides for increased daily discharge volumes to allow more flexibility in plant operations. "This permit is the result of a positive year-long effort with the New Mexico Groundwater Quality Bureau," said Jody Plum, DOE Carlsbad Field Office Permitting and

43

Differential pressure pin discharge apparatus  

DOE Patents (OSTI)

Disclosed is a discharge assembly for allowing elongate pins to be discharged from an area of relatively low pressure to an area of relatively greater pressure. The discharge assembly includes a duck valve having a lip piece made of flexible material. The flexible lip piece responds to a fluctuating pressure created downstream by an aspirator. The aspirator reduces the downstream pressure sensed by the duck valve when the discharge assembly is in the open position. This allows elongate pins to be moved through the duck valve with no backflow because the aspirator pressure is less than the pressure in the low pressure area from which the pins originate. Closure of the assembly causes the aspirator static pressure to force the flexible duck valve lip piece into a tightly sealed position also preventing backflow. The discharge assembly can be easily controlled using a single control valve which blocks the flow of aspirator gas and closes the pin passageway extending through the assembly.

Oakley, David J. (Richland, WA)

1987-01-01T23:59:59.000Z

44

EPA - National Pollutant Discharge Elimination System General...  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: EPA - National Pollutant Discharge Elimination System General Permit for Discharges...

45

Industrial Discharge Permits (District of Columbia)  

Energy.gov (U.S. Department of Energy (DOE))

All businesses and government agencies discharging process wastewater to the public sewer system must report their activities to DC Water's Pretreatment Center. Wastewater discharge permits are...

46

Groundwater Discharge Permit and Registration (New Hampshire)  

Energy.gov (U.S. Department of Energy (DOE))

The Groundwater Discharge Permitting and Registration Program seeks to protect groundwater quality by establishing standards, criteria, and procedures for wastewater discharges. The program...

47

High-frequency discharges III  

Science Journals Connector (OSTI)

We start with a comparison of advantages and disadvantages of capacitively coupled discharges, by which it becomes obvious why and how the semiconductor industry has triggered the demand for high-density plasm...

Prof.Dr. Gerhard Franz

2009-01-01T23:59:59.000Z

48

Discharge cell for ozone generator  

DOE Patents (OSTI)

A discharge cell for use in an ozone generator is provided which can suppress a time-related reduction in ozone concentration without adding a catalytic gas such as nitrogen gas to oxygen gas as a raw material gas. The discharge cell includes a pair of electrodes disposed in an opposed spaced relation with a discharge space therebetween, and a dielectric layer of a three-layer structure consisting of three ceramic dielectric layers successively stacked on at least one of the electrodes, wherein a first dielectric layer of the dielectric layer contacting the one electrode contains no titanium dioxide, wherein a second dielectric layer of the dielectric layer exposed to the discharge space contains titanium dioxide in a metal element ratio of not lower than 10 wt %.

Nakatsuka, Suguru (Amagasaki, JP)

2000-01-01T23:59:59.000Z

49

Discharge produces hydrocarbons from coal  

Science Journals Connector (OSTI)

Discharge produces hydrocarbons from coal ... Studies of the reactions of coal in electric discharges by two chemists at the U.S. Bureau of Mines' Pittsburgh Coal Research Center may lead to improved ways of producing acetylene and other useful chemicals from coal. ... Other workers have produced high yields of acetylene from coal by extremely rapid pyrolysis using energy sources such as plasma jets, laser beams, arc-image reactors, and flash heaters. ...

1968-01-22T23:59:59.000Z

50

Water purification by electrical discharges  

Science Journals Connector (OSTI)

There is a continuing need for the development of effective, cheap and environmentally friendly processes for the disinfection and degradation of organic pollutants from water. Ozonation processes are now replacing conventional chlorination processes because ozone is a stronger oxidizing agent and a more effective disinfectant without any side effects. However, the fact that the cost of ozonation processes is higher than chlorination processes is their main disadvantage. In this paper recent developments targeted to make ozonation processes cheaper by improving the efficiency of ozone generation, for example, by incorporation of catalytic packing in the ozone generator, better dispersion of ozone in water and faster conversion of dissolved ozone to free radicals are described. The synthesis of ozone in electrical discharges is discussed. Furthermore, the generation and plasma chemical reactions of several chemically active species, such as H2O2, O, OH, HO2, O3*, N2*, e-, O2-, O-, O2+, etc, which are produced in the electrical discharges are described. Most of these species are stronger oxidizers than ozone. Therefore, water treatment by direct electrical discharges may provide a means to utilize these species in addition to ozone. Much research and development activity has been devoted to achieve these targets in the recent past. An overview of these techniques and important developments that have taken place in this area are discussed. In particular, pulsed corona discharge, dielectric barrier discharge and contact glow discharge electrolysis techniques are being studied for the purpose of cleaning water. The units based on electrical discharges in water or close to the water level are being tested at industrial-scale water treatment plants.}

Muhammad Arif Malik; Abdul Ghaffar; Salman Akbar Malik

2001-01-01T23:59:59.000Z

51

Iodine monofluoride discharge laser investigation  

SciTech Connect

The results of an experimental investigation to improve the performance of a discharge-pumped iodine monofluoride laser are reported. Lasing was observed at 478.7, 484.7, 490.7, and 496.5 nm. Electrical measurements of the discharge characteristics permitted the energy flow in the circuit to be followed and laser efficiencies to be calculated. Parametric studies of gas mixtures were carried out. By optimizing several parameters, single-pulse lasing energies greater than 50 mJ were obtained.

Harris, D.G.; Blauer, J.A.; Hurlock, S.C. (Rockwell International, Rocketdyne Division, Canoga Park, CA (USA))

1990-10-15T23:59:59.000Z

52

Compact monolithic capacitive discharge unit  

DOE Patents (OSTI)

A compact monolithic capacitive discharge unit (CDU) is disclosed in which a thyristor switch and a flyback charging circuit are both sandwiched about a ceramic energy storage capacitor. The result is a compact rugged assembly which provides a low-inductance current discharge path. The flyback charging circuit preferably includes a low-temperature co-fired ceramic transformer. The CDU can further include one or more ceramic substrates for enclosing the thyristor switch and for holding various passive components used in the flyback charging circuit. A load such as a detonator can also be attached directly to the CDU.

Roesler, Alexander W. (Tijeras, NM); Vernon, George E. (Rio Rancho, NM); Hoke, Darren A. (Albuquerque, NM); De Marquis, Virginia K. (Tijeras, NM); Harris, Steven M. (Albuquerque, NM)

2007-06-26T23:59:59.000Z

53

State Waste Discharge Permit application, 183-N Backwash Discharge Pond  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173--216 (or 173--218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE91NM-177, (Ecology and DOE-RL 1991). The Consent Order No. DE91NM-177 requires a series of permitting activities for liquid effluent discharges. Liquid effluents on the Hanford Site have been classified as Phase I, Phase II, and Miscellaneous Streams. The Consent Order No. DE91NM-177 establishes milestones for State Waste Discharge Permit application submittals for all Phase I and Phase II streams, as well as the following 11 Miscellaneous Streams as identified in Table 4 of the Consent Order No. DE91NM-177.

Not Available

1994-06-01T23:59:59.000Z

54

State Surface Water Discharge Permits (New Hampshire)  

Energy.gov (U.S. Department of Energy (DOE))

Rules apply to the discharge of all pollutants from a point source to surface waters of the state. The rule does not apply to facilities that require both a state discharge permit and a federal...

55

Oklahoma Pollutant Discharge Elimination System Act (Oklahoma)  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Environmental Quality regulates facilities that discharge any pollutant into waters of the state. Permits must be acquired before the discharge of any pollutants into state waters...

56

Generator of Rainfall And Discharge Extremes  

E-Print Network (OSTI)

Generator of Rainfall And Discharge Extremes (GRADE) for the Rhine and Meuse basins Report RWS RIZA 2007.027 KNMI-publication 218 #12;Generator of Rainfall And Discharge Extremes (GRADE) for the Rhine.027 KNMI-publication 218 ISBN 9789036914062 #12;2Generator of Rainfall And Discharge Extremes (GRADE

Stoffelen, Ad

57

2, 22872325, 2005 discharge+sediment  

E-Print Network (OSTI)

HESSD 2, 2287­2325, 2005 Water discharge+sediment flux changes in Lower Mekon River X. X. Lu and R Sciences Water discharge and sediment flux changes in the Lower Mekong River X. X. Lu and R. Y. Siew­2325, 2005 Water discharge+sediment flux changes in Lower Mekon River X. X. Lu and R. Y. Siew Title Page

Paris-Sud XI, Université de

58

Cold cathode vacuum discharge tube  

DOE Patents (OSTI)

A cold cathode vacuum discharge tube, and method for making same, with an interior surface of the trigger probe coated with carbon deposited by carbon vapor deposition (CVD) or diamond-like carbon (DLC) deposition. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging.

Boettcher, Gordon E. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

59

Wastewater Discharge Program (Maine) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wastewater Discharge Program (Maine) Wastewater Discharge Program (Maine) Wastewater Discharge Program (Maine) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Buying & Making Electricity Program Info State Maine Program Type Siting and Permitting Provider Department of Environmental Protection The wastewater discharge regulations require that a license be obtained for the discharge of wastewater to a stream, river, wetland, or lake of the

60

Glow discharge deposition at high rates using disilane  

SciTech Connect

The research program reported makes use of the fact that amorphous silicon films can be grown faster from disilane in a glow discharge than from the traditional silane. The goal is to find a method to grow films at a high rate and with sufficiently high quality to be used in an efficient solar cell. It must also be demonstrated that the appropriate device structure can be successfully fabricated under conditions which give high deposition rates. High quality intrinsic films have been deposited at 20 A/s. Efficiency of 5.6% on steel substrates and 5.3% on glass substrates were achieved using disilane i-layers deposited at 15 A/s in a basic structure, without wide-gap doped layers or light trapping. Wide gap p-layers were deposited using disilane. Results were compared with those obtained at Vactronic using high power discharges of silane-hydrogen mixtures. (LEW)

Rajeswaran, G.; Corderman, R.R.; Kampas, F.J.; Vanier, P.E.

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Evaluation of instantaneous surface water discharge techniques  

SciTech Connect

To obtain accurate discharge data in any surface water monitoring program, the selection of an appropriate technique is essential. This paper examines five instantaneous discharge techniques most commonly used throughout the Appalachian coal fields. The techniques evaluated in this paper include: (1) dye-dilution; (2) cross-sectional area-velocity; (3) weir; (4) Manning's equation; and (5) direct discharge. Each of the instantaneous discharge techniques was evaluated in terms of: (1) initial equipment investment cost per discharge determination; (2) the advantages and disadvantages of each technique; and (3) the appropriate application of each technique. From this evaluation, it was apparent that a combination of several techniques are needed to determine a variety of discharges depending on the characteristics of the discharge point.

Buckles, J.D.

1984-12-01T23:59:59.000Z

62

Discharge quencher for Geiger counters  

SciTech Connect

A discharge quencher for halogen Geiger counters with a total powercutoff time after the appearance of an input signal of -70 nsec and an input sensitivity of -50 mV is described. The circuit permits parallel control of five STS-5 counters for a quenching-pulse duration of 4.5 usec. Counting responses with slopes to 0.131%/V and a plateau width of 100 V at a load of 60,000 pulses/sec are obtained for two STS-5 counters. The maximum load is 120,000 pulses/sec.

Mushev, R.K.

1986-03-01T23:59:59.000Z

63

Confined plasma gliding arc discharges  

Science Journals Connector (OSTI)

A confined plasma gliding arc is produced in a reactor with two-electrodes contained within a very narrow channel and water spray injected into the discharge. The evolution of pH and conductivity and the formation of hydrogen peroxide in pure water with different carrier gases and the decolourisation and mineralisation of an organic dye were compared with results for a non-confined three-electrode gliding arc reactor. The energy efficiency for the decolourisation of an organic blue dye in the confined reactor is twice that of the non-confined reactor. Significant levels of total organic carbon are removed in the confined plasma reactor.

Radu Burlica; Bruce R. Locke

2008-01-01T23:59:59.000Z

64

Environmental and health aspects of lighting: Mercury  

SciTech Connect

Most discharge lamps, including fluorescent lamps, metal halide lamps, and high pressure sodium lamps, contain Mercury, a toxic chemical. Lighting professionals need to be able to respond to questions about the direct hazards of Mercury from accidentally breaking lamps, and the potential environmental hazards of lamp operation and disposal. We calculated the exposures that could occur from an accidental breakage of lamps. Acute poisoning appears almost impossible. Under some circumstances a sealed environment, such as a space station, could be contaminated enough to make it unhealthy for long-term occupation. Mercury becomes a potential environmental hazard after it becomes methylated. Mercury is methylated in aquatic environments, where it may accumulate in fish, eventually rendering them toxic to people and other animals. Lighting causes Mercury to enter the environment directly from lamp disposal, and indirectly from power plant emissions. The environmental tradeoffs between incandescent and discharge lamps depend upon the amounts released by these two sources, their local concentrations, and their probabilities of being methylated. Indirect environmental effects of lighting also include the release of other heavy metals (Cadmium, Lead and Arsenic), and other air pollutants and carbon dioxide that are emitted by fossil fuel power plants. For a given light output, the level of power plant emissions depends upon the efficacy of the light source, and is thus much larger for incandescent lamps than for fluorescent or discharge lamps. As disposal and control technologies change the relative direct and indirect emissions from discharge and incandescent lamps will change.

Clear, R.; Berman, S.

1993-07-01T23:59:59.000Z

65

Low-Pressure Sodium Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Low-Pressure Sodium Lighting Basics Low-Pressure Sodium Lighting Basics Low-Pressure Sodium Lighting Basics August 16, 2013 - 10:17am Addthis Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color rendition. Typical applications include highway and security lighting, where color is not important. Low-pressure sodium lamps work somewhat like fluorescent lamps. Like high-intensity discharge lighting, low-pressure sodium lamps require up to 10 minutes to start and have to cool before they can restart. Therefore, they are most suitable for applications in which they stay on for hours at a time. They are not suitable for use with motion detectors. The chart below compares low-pressure sodium lamps and high-intensity

66

Light Portal  

Science Journals Connector (OSTI)

The Light Portal was designed to organize and mark the pedestrian paths that circumnavigate the rectangle of the...

2006-01-01T23:59:59.000Z

67

Oklahoma Pollutant Discharge Elimination System (OPDES) Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oklahoma Pollutant Discharge Elimination System (OPDES) Standards Oklahoma Pollutant Discharge Elimination System (OPDES) Standards (Oklahoma) Oklahoma Pollutant Discharge Elimination System (OPDES) Standards (Oklahoma) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor Industrial Installer/Contractor Investor-Owned Utility Local Government Municipal/Public Utility Nonprofit Retail Supplier Rural Electric Cooperative State/Provincial Govt Systems Integrator Tribal Government Utility Program Info State Oklahoma Program Type Environmental Regulations Provider Oklahoma Department of Environmental Quality This program of the Water Quality Division of the Department of Environmental Quality sets the point source, biosolids (sewage sludge), and stormwater permitting standards for discharges to the waters of the State

68

Oil and Hazardous Substance Discharge Preparedness (Minnesota)  

Energy.gov (U.S. Department of Energy (DOE))

Anyone who owns or operates a vessel or facility that transports, stores, or otherwise handles hazardous wastes must take reasonable steps to prevent the discharge of those materials.

69

Characterization of electrical discharge machining plasmas.  

E-Print Network (OSTI)

??Electrical Discharge Machining (EDM) is a well-known machining technique since more than fifty years. Its principle is to use the eroding effect on the electrodes (more)

Descoeudres, Antoine

2006-01-01T23:59:59.000Z

70

Electro discharge machining for micro manufacturing.  

E-Print Network (OSTI)

??Due to the high precision and good surface quality that it can give, Electrical Discharge Machining (EDM) is potentially an important process for the fabrication (more)

Ivanov, Atanas

2008-01-01T23:59:59.000Z

71

Montana Pollutant Discharge Elimination System (MPDES) Webpage...  

Open Energy Info (EERE)

an overview of Montana's MPDES program for control point source discharges of wastewater. Author Montana Department of Environmental Quality Published State of Montana, Date...

72

CDPHE Industrial Individual Wastewater Discharge Permit Application...  

Open Energy Info (EERE)

Legal Document- Permit ApplicationPermit Application: CDPHE Industrial Individual Wastewater Discharge Permit ApplicationLegal Abstract Application provided by the Colorado...

73

California Waste Discharge Requirements Website | Open Energy...  

Open Energy Info (EERE)

Requirements Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: California Waste Discharge Requirements Website Abstract This website contains...

74

Light's twist  

Science Journals Connector (OSTI)

...equal to the optical power divided by the speed of light, and hence go unnoticed in our everyday lives...approaching object equal to the power in the light beam (P) divided by the speed of light. The movement of the approaching object does...

2014-01-01T23:59:59.000Z

75

Light Properties Light travels at the speed of light `c'  

E-Print Network (OSTI)

LIGHT!! #12;Light Properties Light travels at the speed of light `c' C = 3 x 108 m/s Or 190.nasa.gov #12;The speed of light The speed of light `c' is equal to the frequency ` times the wavelength,000 miles/second!! Light could travel around the world about 8 times in one second #12;What is light?? Light

Mojzsis, Stephen J.

76

Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Purple LED lamp Purple LED lamp Lighting Systems Lighting research is aimed at improving the energy efficiency of lighting systems in buildings and homes across the nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research falls into four main areas: Sources and Ballasts, Light Distribution Systems, Controls and Communications, and Human Factors. Contacts Francis Rubinstein FMRubinstein@lbl.gov (510) 486-4096 Links Lighting Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

77

Physical mechanisms of self-organization and formation of current patterns in gas discharges of the Townsend and glow types  

SciTech Connect

The paper discusses current filamentation and formation of current structures (in particular, hexagonal current patterns) in discharges of the Townsend and glow types. The aim of the paper, which is in part a review, is to reveal basic reasons for formation of current patterns in different cases, namely, in dielectric barrier discharge, discharge with semiconductor cathode, and micro-discharge between metallic electrodes. Pursuing this goal, we give a very brief review of observations and discuss only those theoretical, computational, and experimental papers that shed light on the physical mechanisms involved. The mechanisms are under weak currentsthe thermal expansion of the gas as a result of Joule heating; under enhanced currentsthe electric field and ionization rate redistribution induced by space charge. Both mechanisms lead to instability of the homogeneous discharges. In addition, we present new results of numerical simulations of observed short-living current filaments which are chaotic in space and time.

Raizer, Yu. P.; Mokrov, M. S. [Institute for Problems in Mechanics, Russian Academy of Sciences, Moscow 119526 (Russian Federation)] [Institute for Problems in Mechanics, Russian Academy of Sciences, Moscow 119526 (Russian Federation)

2013-10-15T23:59:59.000Z

78

The Spore Discharge Mechanism of Common Ferns  

Science Journals Connector (OSTI)

...subtended by the annular arc from pedicel to spore...unchanged during the discharge process. The decrease...modulus of the annular arc and the range of spores...by means of a piezo-electric device in a stream of...Ingold, C. T., Spore Discharge in Land Plants, Oxford...

Allen L. King

1944-01-01T23:59:59.000Z

79

Plasma discharge self-cleaning filtration system  

DOE Patents (OSTI)

The present invention is directed to a novel method for cleaning a filter surface using a plasma discharge self-cleaning filtration system. The method involves utilizing plasma discharges to induce short electric pulses of nanoseconds duration at high voltages. These electrical pulses generate strong Shockwaves that disintegrate and dislodge particulate matter located on the surface of the filter.

Cho, Young I.; Fridman, Alexander; Gutsol, Alexander F.; Yang, Yong

2014-07-22T23:59:59.000Z

80

Kinetic Effects In Hall Thruster Discharge  

E-Print Network (OSTI)

of a capacitive discharge. 4 capacitive discharge. For more info: V. Godyak, IEEE TPS 34, 755 (2006). #12 th twall interactions in Hall thrusters Large electron temperature andE JH~1cm secondary electron emission result in large particle and wall losses to the wall E , Jz z Br H~1cm 120 eV High SEE BN channel

Kaganovich, Igor

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Helium corona-assisted air discharge  

SciTech Connect

Operation of atmospheric discharge of electronegative gases including air at low voltages yet without consuming any inert gas will enormously promote the application of non-thermal plasmas. By taking advantage of the low onset voltage for helium corona, air discharge was successfully launched at much reduced voltages with a needle-plate system partly contained in a helium-filled glass bulb--for a needle-plate distance of 12 mm, 1.0 kV suffices. Ultraviolet emission from helium corona facilitates the discharging of air, and the discharge current manifests distinct features such as relatively broad Trichel pulses in both half periods. This design allows safe and economic implementation of atmospheric discharge of electronegative gases, which will find a broad palette of applications in surface modification, plasma medicine and gas treatment, etc.

Jiang Nan; Gao Lei; Ji Ailing; Cao Zexian [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China)

2011-10-15T23:59:59.000Z

82

Pulsed-Light Inactivation of Food-Related Microorganisms  

Science Journals Connector (OSTI)

...create a high-peak-power discharge. The generator...impedance, when fired, was 6.25 . A...average peak electrical power, per pulse, of...high-intensity light generation, it was possible...significant levels of peak power in the light source...de-charged high pressure gas switches. . Pennington...

N. J. Rowan; S. J. MacGregor; J. G. Anderson; R. A. Fouracre; L. McIlvaney; O. Farish

1999-03-01T23:59:59.000Z

83

Lighting Renovations  

Energy.gov (U.S. Department of Energy (DOE))

When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

84

Cerenkov Light  

ScienceCinema (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2014-05-22T23:59:59.000Z

85

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

formation of the electric discharge arc and the metals emitdefined as electric discharge lamps in which the arc tubelamp - an electric discharge lamp in which the arc tube wall

Scholand, Michael

2012-01-01T23:59:59.000Z

86

Solid-state lighting technology perspective.  

SciTech Connect

Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

2006-08-01T23:59:59.000Z

87

Northern Lights  

NLE Websites -- All DOE Office Websites (Extended Search)

Northern Lights Northern Lights Nature Bulletin No. 178-A February 6, 1965 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation NORTHERN LIGHTS To a person seeing the Aurora Borealis or "northern lights" for the first time, it is an uncanny awe-inspiring spectacle. Sometimes it begins as a glow of red on the northern horizon, ominously suggesting a great fire, gradually changing to a curtain of violet-white, or greenish-yellow light extending from east to west. Some times this may be transformed to appear as fold upon fold of luminous draperies that march majestically across the sky; sometimes as a vast multitude of gigantic flaming swords furiously slashing at the heavens; sometimes as a flowing crown with long undulating colored streamers fanning downward and outward.

88

Contour dynamics model for electric discharges  

Science Journals Connector (OSTI)

We present an effective contour model for electrical discharges deduced as the asymptotic limit of the minimal streamer model for the propagation of electric discharges, in the limit of small electron diffusion. The incorporation of curvature effects to the velocity propagation and not to the boundary conditions is a feature and makes it different from the classical Laplacian growth models. The dispersion relation for a nonplanar two-dimensional discharge is calculated. The development and propagation of fingerlike patterns are studied and their main features quantified.

M. Arrays, M. A. Fontelos, and C. Jimnez

2010-03-18T23:59:59.000Z

89

Acoustic Emission Mapping of Discharges in Spark Erosion Machining.  

E-Print Network (OSTI)

?? Electrical discharge machining (EDM) is a non-conventional machining process utilizing a series of electrical discharges to melt and vaporize workpiece material. In a wire (more)

Smith, Craig

2012-01-01T23:59:59.000Z

90

Report of Waste Discharge application (Form 200) | Open Energy...  

Open Energy Info (EERE)

application (Form 200) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Report of Waste Discharge application (Form 200) Abstract Persons discharging or...

91

Hydrothermal Heat Discharge In The Cascade Range, Northwestern...  

Open Energy Info (EERE)

Heat Discharge In The Cascade Range, Northwestern United States Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Hydrothermal Heat Discharge In...

92

WSDE Report: Wastewater Discharge Permits in Washington State...  

Open Energy Info (EERE)

Wastewater Discharge Permits in Washington State Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: WSDE Report: Wastewater Discharge Permits in Washington...

93

Glow discharge plasma deposition of thin films  

DOE Patents (OSTI)

A glow discharge plasma reactor for deposition of thin films from a reactive RF glow discharge is provided with a screen positioned between the walls of the chamber and the cathode to confine the glow discharge region to within the region defined by the screen and the cathode. A substrate for receiving deposition material from a reactive gas is positioned outside the screened region. The screen is electrically connected to the system ground to thereby serve as the anode of the system. The energy of the reactive gas species is reduced as they diffuse through the screen to the substrate. Reactive gas is conducted directly into the glow discharge region through a centrally positioned distribution head to reduce contamination effects otherwise caused by secondary reaction products and impurities deposited on the reactor walls.

Weakliem, Herbert A. (Pennington, NJ); Vossen, Jr., John L. (Bridgewater, NJ)

1984-05-29T23:59:59.000Z

94

Transition from Glow to Arc Discharge  

Science Journals Connector (OSTI)

... I HAVE suggested1 a mechanism to account for the occurrence of long electrical discharges in ... in electric fields which are only of the order of one per cent of those generally believed2 ...

CHAS. E. R. BRUCE

1948-04-03T23:59:59.000Z

95

Discharge dynamics of pin-to-plate dielectric barrier discharge at atmospheric pressure  

SciTech Connect

The discharge dynamics of pin-to-plate dielectric barrier discharge was studied in atmospheric helium at 20 kHz. The discharge was predominately ignited in positive half cycle of applied voltage with sinusoidal waveform. The temporal evolution of the discharge was investigated vertically along the discharge gap and radically on the dielectric surface by time resolved imaging. It is found that a discharge column with a diameter of 2 mm was ignited above the pin electrode and expanded toward a plate electrode. On the dielectric surface with space charge accumulation, plasma disk in terms of plasma ring was formed with radius up to 25 mm. The expansion velocity of plasma ring can reach a hypersonic speed of 3.0 km/s. The ionization wave due to electron diffusion is considered to be the mechanism for plasma ring formation and dynamics.

Sun Liqun [College of Science, Donghua University, Shanghai 201620 (China); Huang, Xiaojiang [College of Science, Donghua University, Shanghai 201620 (China); Member of Magnetic Confinement Fusion Research Center, Ministry of Education of the People's Republic of China, Shanghai 201620 (China); Zhang Jie [College of Science, Donghua University, Shanghai 201620 (China); State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, Donghua University, Shanghai 201620 (China); Zhang Jing; Shi, J. J. [College of Science, Donghua University, Shanghai 201620 (China); State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, Donghua University, Shanghai 201620 (China); Member of Magnetic Confinement Fusion Research Center, Ministry of Education of the People's Republic of China, Shanghai 201620 (China)

2010-11-15T23:59:59.000Z

96

Magnetic dipole discharges. II. Cathode and anode spot discharges and probe diagnostics  

SciTech Connect

The high current regime of a magnetron-type discharge has been investigated. The discharge uses a permanent magnet as a cold cathode which emits secondary electrons while the chamber wall or a grounded electrode serves as the anode. As the discharge voltage is increased, the magnet develops cathode spots, which are short duration arcs that provide copious electrons to increase the discharge current dramatically. Short (1 ?s), high current (200 A) and high voltage (750 V) discharge pulses are produced in a relaxation instability between the plasma and a charging capacitor. Spots are also observed on a negatively biased plane Langmuir probe. The probe current pulses are as large as those on the magnet, implying that the high discharge current does not depend on the cathode surface area but on the properties of the spots. The fast current pulses produce large inductive voltages, which can reverse the electrical polarity of the magnet and temporarily operate it as an anode. The discharge current may also oscillate at the frequency determined by the charging capacitor and the discharge circuit inductance. Each half cycle of high-current current pulses exhibits a fast (?10 ns) current rise when a spot is formed. It induces high frequency (10100 MHz) transients and ringing oscillations in probes and current circuits. Most probes behave like unmatched antennas for the electromagnetic pulses of spot discharges. Examples are shown to distinguish the source of oscillations and some rf characteristics of Langmuir probes.

Stenzel, R. L.; Urrutia, J. M. [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States)] [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States); Ionita, C.; Schrittwieser, R. [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)] [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)

2013-08-15T23:59:59.000Z

97

Ion-molecule reactions and ion energies in a CF4 discharge  

Science Journals Connector (OSTI)

Absolute cross sections have been measured for reactants typically found in carbon tetrafluoride (CF4) discharges for collision energies below a few hundred electron volts. The reactions investigated include collision-induced dissociation and dissociative electron transfer reactions for CF3+ and F+ colliding with CF4, and collisional electron detachment for F- colliding with CF4. Also presented are measurements of energies and relative intensities of ions generated in dc Townsend CF4 discharges with E/N values ranging from 410-18?V m2 to 2510-18?V m2 [4 to 25 kTd]. Ion energy and ion intensity data for the Townsend discharges are analyzed in light of the measured cross sections.

B. L. Peko; I. V. Dyakov; R. L. Champion; M. V. V. S. Rao; J. K. Olthoff

1999-12-01T23:59:59.000Z

98

Studies on erosion of silicone rubber exposed to partial arc discharges  

Science Journals Connector (OSTI)

The effect of electrolyte conductivity on the partial arc discharge development between two electrolyte electrodes on a silicone rubber sheet surface was investigated. Tests were executed by placing the salt-waterlogged glass-filter paper on a silicone rubber sheet to simulate a polluted electrolyte layer, and partial arc discharges with a constant current value of 10mA were observed. It was found that the formation of an arc channel and a temperature distribution on the sample surface varied with the electrolyte conductivity. In addition, the relation between the electrolyte conductivity and the weight loss due to the heat erosion of specimens was also investigated by a 3D morphological observation and a simulated calculation. The partial arc discharge did significantly not influence on the sample surface erosion under serious polluted conditions. In contrast, the severest erosion appeared under the light pollution with comparatively lower conductivity of the electrolyte electrodes.

Kenichi Haji; Yong Zhu; Masahisa Otsubo; Tatsuya Sakoda

2008-01-01T23:59:59.000Z

99

Solid-State Lighting: LED Lighting Facts  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Based Programs Printable Version Share this resource Send a link to Solid-State Lighting: LED Lighting Facts to someone by E-mail Share Solid-State Lighting: LED Lighting Facts on Facebook Tweet about Solid-State Lighting: LED Lighting Facts on Twitter Bookmark Solid-State Lighting: LED Lighting Facts on Google Bookmark Solid-State Lighting: LED Lighting Facts on Delicious Rank Solid-State Lighting: LED Lighting Facts on Digg Find More places to share Solid-State Lighting: LED Lighting Facts on AddThis.com... LED Lighting Facts CALiPER Program Standards Development Technical Information Network Gateway Demonstrations Municipal Consortium Design Competitions LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general

100

Mass dependency of turbulent parameters in stationary glow discharge plasmas  

SciTech Connect

A direct current glow discharge tube is used to determine how mass changes the effects of certain turbulence characteristics in a weakly ionized gas. Helium, neon, argon, and krypton plasmas were created, and an axial magnetic field, varied from 0.0 to 550.0 Gauss, was used to enhance mass dependent properties of turbulence. From the power spectra of light emission variations associated with velocity fluctuations, determination of mass dependency on turbulent characteristic unstable modes, energy associated with turbulence, and the rate at which energy is transferred from scale to scale are measured. The magnetic field strength is found to be too weak to overcome particle diffusion to the walls to affect the turbulence in all four types of plasmas, though mass dependency is still detected. Though the total energy and the rate at which the energy moves between scales are mass invariant, the amplitude of the instability modes that characterize each plasma are dependent on mass.

Titus, J. B.; Alexander, A. B. [Florida A and M University, Tallahassee, Florida 32310 (United States)] [Florida A and M University, Tallahassee, Florida 32310 (United States); Wiggins, D. L. [Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53703 (United States)] [Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53703 (United States); Johnson, J. A. III [Pyramid Plasmas LLC, Lawrenceville, Georgia 30043 (United States)] [Pyramid Plasmas LLC, Lawrenceville, Georgia 30043 (United States)

2013-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Magnetic dipole discharges. I. Basic properties  

SciTech Connect

A simple discharge is described which uses a permanent magnet as a cold cathode and the metallic chamber wall as an anode. The magnet's equator is biased strongly negative, which produces secondary electrons due to the impact of energetic ions. The emitted electrons are highly confined by the strong dipolar magnetic field and the negative potential in the equatorial plane of the magnet. The emitted electrons ionize near the sheath and produce further electrons, which drift across field lines to the anode while the nearly unmagnetized ions are accelerated back to the magnet. A steady state discharge is maintained at neutral pressures above 10{sup ?3} mbar. This is the principle of magnetron discharges, which commonly use cylindrical and planar cathodes rather than magnetic dipoles as cathodes. The discharge properties have been investigated in steady state and pulsed mode. Different magnets and geometries have been employed. The role of a background plasma has been investigated. Various types of instabilities have been observed such as sheath oscillations, current-driven turbulence, relaxation instabilities due to ionization, and high frequency oscillations created by sputtering impulses, which are described in more detail in companion papers. The discharge has also been operated in reactive gases and shown to be useful for sputtering applications.

Stenzel, R. L.; Urrutia, J. M. [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States)] [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States); Teodorescu-Soare, C. T.; Ionita, C.; Schrittwieser, R. [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)] [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)

2013-08-15T23:59:59.000Z

102

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

demonstration (like street lights) and commercialization andthe dominant light source for street and roadway lighting,has been a popular light source for street lighting because

Scholand, Michael

2012-01-01T23:59:59.000Z

103

Discharge characteristics of atmospheric-pressure radio-frequency glow discharges with argon/nitrogen  

SciTech Connect

In this letter, atmospheric-pressure glow discharges in {gamma} mode with argon/nitrogen as the plasma-forming gas using water-cooled, bare copper electrodes driven by radio-frequency power supply at 13.56 MHz are achieved. The preliminary studies on the discharge characteristics show that, induced by the {alpha}-{gamma} coexisting mode or {gamma} mode discharge of argon, argon-nitrogen mixture with any mixing ratios, even pure nitrogen, can be employed to generate the stable {gamma} mode radio-frequency, atmospheric-pressure glow discharges and the discharge voltage rises with increasing the fraction of nitrogen in the argon-nitrogen mixture for a constant total gas flow rate.

Wang Huabo; Sun Wenting; Li Heping; Bao Chengyu; Gao Xing; Luo Huiying [Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); School of Public Health and Family Medicine, Capital University of Medical Sciences, Beijing 100069 (China); Beijing Center for Diseases Control and Prevention, Beijing 100013 (China)

2006-10-16T23:59:59.000Z

104

Discharge ignition characteristics of pulsed radio-frequency glow discharges in atmospheric helium  

Science Journals Connector (OSTI)

An experimental study of radio-frequency (15 MHz) glow discharges in atmospheric helium modulated by pulses with repetition frequency of 500 kHz and duty cycle of 6% and 8% is presented in this paper. In each discharge burst the discharge is restricted to operate in ignition phase with duration of one or two radio-frequency cycles. The ignition characteristics in terms of spatial-temporal evolution of discharge interelectrode structure and optical emission intensity are investigated by time resolved imaging. Optical emission intensities at lines of 706 and 777 nm are used to capture clearly the temporal evolution of energetic electrons and active specie of atom oxygen generated in discharge.

Jianjun Shi; Yeqing Cai; Jie Zhang; Ke Ding; Jing Zhang

2009-01-01T23:59:59.000Z

105

Discharge ignition characteristics of pulsed radio-frequency glow discharges in atmospheric helium  

SciTech Connect

An experimental study of radio-frequency (15 MHz) glow discharges in atmospheric helium modulated by pulses with repetition frequency of 500 kHz and duty cycle of 6% and 8% is presented in this paper. In each discharge burst, the discharge is restricted to operate in ignition phase with duration of one or two radio-frequency cycles. The ignition characteristics in terms of spatial-temporal evolution of discharge interelectrode structure and optical emission intensity are investigated by time resolved imaging. Optical emission intensities at lines of 706 and 777 nm are used to capture clearly the temporal evolution of energetic electrons and active specie of atom oxygen generated in discharge.

Shi Jianjun; Cai Yeqing; Zhang Jie; Ding Ke; Zhang Jing [State Key Lab for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, and College of Science, Donghua University, Shanghai 201620 (China)

2009-07-15T23:59:59.000Z

106

Central peaking of magnetized gas discharges  

SciTech Connect

Partially ionized gas discharges used in industry are often driven by radiofrequency (rf) power applied at the periphery of a cylinder. It is found that the plasma density n is usually flat or peaked on axis even if the skin depth of the rf field is thin compared with the chamber radius a. Previous attempts at explaining this did not account for the finite length of the discharge and the boundary conditions at the endplates. A simple 1D model is used to focus on the basic mechanism: the short-circuit effect. It is found that a strong electric field (E-field) scaled to electron temperature T{sub e}, drives the ions inward. The resulting density profile is peaked on axis and has a shape independent of pressure or discharge radius. This universal profile is not affected by a dc magnetic field (B-field) as long as the ion Larmor radius is larger than a.

Chen, Francis F. [Electrical Engineering Department, University of California, Los Angeles, California 90095 (United States)] [Electrical Engineering Department, University of California, Los Angeles, California 90095 (United States); Curreli, Davide [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana Champaign, Urbana, Illinois 61801 (United States)] [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana Champaign, Urbana, Illinois 61801 (United States)

2013-05-15T23:59:59.000Z

107

Characteristics of the Dense Plasma Focus Discharge  

Science Journals Connector (OSTI)

The dense plasma focus discharge is produced in a hydromagnetic coaxial plasma accelerator. The final heating and compression of the plasma is accomplished by a partial conversion of the stored magnetic energy residing in the region behind the current sheath to plasma energy. The electrical behavior of the discharge is examined to determine the fraction of the initial energy involved in mechanical sheath motion inductive storage in the accelerator and Ohmic losses associated with the external and plasma discharge. Many analysis of this kind of datum show no definite correlation between the energy converted and neutron production. Presumably this arises from a lack of information as to how the collapse uses this energy and to the amount of plasma ejected from the dense plasma region during the collapse. From soft x?ray pinhole and Schlieren photographs the collapse and the development of the dense plasma is unquestionably a two?dimensional pinch compression.

Joseph W. Mather; Paul J. Bottoms

1968-01-01T23:59:59.000Z

108

Light's twist  

Science Journals Connector (OSTI)

...Glasgow G12 8QQ, UK An invited Perspective to mark the election of Miles Padgett to the fellowship of the Royal Society in 2014. That...energy and momentum flow within light beams can twist to form vortices such as eddies in a stream. These...

2014-01-01T23:59:59.000Z

109

Dependence of recycling and edge profiles on lithium evaporation in high triangularity, high performance NSTX H-mode discharges  

E-Print Network (OSTI)

1 Dependence of recycling and edge profiles on lithium evaporation in high triangularity, high between discharges in NSTX, partly to reduce recycling. Reduced D emissions from the lower and upper of the recycling light, improvements in global confinement16-19 , along with the appearance of ELM-free regimes20

Princeton Plasma Physics Laboratory

110

Texas Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

electric lighting electric lighting The SNAP House's lighting design aims for elegant simplicity in concept, use, and maintenance. Throughout the house, soft, ambient light is juxtaposed with bright, direct task lighting. All ambient and most task lighting is integrated directly into the architectural design of the house. An accent light wall between the bedroom and bathroom provides a glowing light for nighttime navigation.

111

Influence of discharge gap on the discharge stability in a short vacuum arc ion source  

SciTech Connect

The influence of the discharge gap between cathode and anode on the discharge stability in a short vacuum arc (SVA) ion source is presented in this paper. Planar cathode and cylindrical hollow anode made of titanium are investigated. There is a great need in present accelerator injection research for SVA source to produce the small deviation of the ion current beam. Current research shows that increasing the short discharge gap can reduce the level of ion current deviation and ion charge deviation from 29% and 31% to 15% and 17%, respectively. A microplasma plume generation mechanism in SVA and scanning electron microscopic results can be used to explain this interesting phenomenon.

Chen, L. [Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); Zhang, G. L.; Jin, D. Z.; Dai, J. Y. [Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Yang, L. [Institute of Nuclear Science and Technology, Louzhou University, Lanzhou, Gansu 730000 (China)

2012-02-15T23:59:59.000Z

112

Influence of river discharge and ocean currents on coastal optical properties  

Science Journals Connector (OSTI)

Abstract The variability in the optical properties of a coastal region influenced by river runoff and multiple ocean currents in a southern hemisphere setting has been studied. The study area, Tasmanian coastal waters, is influenced by subtropical currents such as the East Australian Current (EAC) and the Zeehan Current (ZC) mix with cooler sub-Antarctic water (SAW). Freshwater discharges from rivers around the island and their mixing with the ocean currents also influence Tasmanian coastal waters. This study was performed to understand the influence of hydrodynamic processes on coastal optical properties and underwater light propagation. Physical, biogeochemical and optical properties were measured in Tasmanian coastal water during the austral autumn of 2007. In this study we found that physical properties have a good correlation with optical properties indicating the role played by hydrodynamic processes in distribution of optically active substances, optical properties of the water mass and underwater light propagation. Analysis of in situ salinity and temperature confirmed the presence of relatively cooler ZC in the South-West region, a cooler mixture of the ZC and SAW in the South-East, warm and saline EAC waters along the East coast and relatively cooler and fresh Bass straight waters along the North coast. In Tasmanian coastal waters light absorption in the water column is controlled by Coloured Dissolved Organic Matter (CDOM) with regionally varying contributions from Non-Algal Particulate (NAP) matter and phytoplankton. Absorption due to CDOM and NAP show a conservative mixing behaviour indicating that these biogeochemical components were delivered by the river and diluted in the coastal water. Suspended particulate matter in Tasmanian coastal water are highly scattering in nature and the beam attenuation is mainly due to light scattering. Variability in probability of light backscattering was mainly due to varying availability of non-algal particulate matter in the surface waters, which is controlled by river discharges in the region. Beam attenuation was high in coastal waters that are influenced by river runoff and increasing beam attenuation had constrained the underwater light propagation in these coastal waters. In the absence of major rivers along the East coast, optical properties were mainly influenced by the EAC water mass. Optical properties of the East coast were clearly different from the rest of the Tasmanian regions. In other regions the influence of ocean currents is subtle due to strong mixing between river discharges and ocean water mass. Overall, analysis of bio-optical properties shows that optical properties are constrained by regional hydrodynamic processes. Results presented highlight importance of using hydrodynamic process specific bio-optical properties and parameterisation in modelling light propagation in coastal ecosystems that are influenced by multiple ocean currents and river discharges.

Nagur Cherukuru; Vittorio E. Brando; Thomas Schroeder; Lesley A. Clementson; Arnold G. Dekker

2014-01-01T23:59:59.000Z

113

Electrochemical and Electro-Discharge Machining with a Threshold Current  

Science Journals Connector (OSTI)

......machining and electro-discharge machining of a metal...problems in which the electric potential satisfies...ECM), electro-discharge machining (EDM...method of electrochemical arc machining (ECAM...depending upon the local electric current density. In......

A. A. LACEY; M. SHILLOR

1987-01-01T23:59:59.000Z

114

CONTROL OF AN ARC DISCHARGE BY MEANS OF A GRID  

Science Journals Connector (OSTI)

CONTROL OF AN ARC DISCHARGE BY MEANS OF A GRID Albert...Research Laboratory, General Electric Co., Schenectady , N. Y. CONTROL OF AN ARC DISCHARGE BY MEANS OF A GRID. | Research Laboratory, General Electric Co., Schenectady , N...

Albert W. Hull; Irving Langmuir

1929-01-01T23:59:59.000Z

115

Discharge convective instability as modifier of nonlinear hydrodynamic spectrum  

E-Print Network (OSTI)

Discharge source is considered as modifier of flow hydrodynamic spectrum. Characteristic frequency of nonlinear spectrum and spectrum power were determined under conditions of arc sliding discharge in supersonic flow. Two stages of discharge were defined: sliding stage and still stage. It was found that stage transition occurs due to convective instability of discharge. Fraction of sliding stage in overall discharge duration is determined by averaged current that is general stable discharge parameter. This phenomenon gives opportunity to control power of pressure fluctuations spectrum. Theoretical insight of field and hydrodynamic factors influencing on pulsations frequency was achieved. Hydrodynamic resistance of discharge region and holding cathode electric field turned out to be basic factors of frequency modification. Corresponding experimental verification was taken. Basic frequency law was determined for several discharge regimes.

Sergey Kamenshchikov

2012-04-26T23:59:59.000Z

116

Montana Facilities Which Do Not Discharge Process Wastewater...  

Open Energy Info (EERE)

Which Do Not Discharge Process Wastewater (MDEQ Form 2E) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Montana Facilities Which Do Not Discharge Process...

117

A power supply unit for discharging the plasma electron source  

Science Journals Connector (OSTI)

A power supply unit for discharging a low-temperature plasma generator based on discharge in the crossed electric and magnetic fields is described. The unit operates in a stationary mode with a preset stabiliz...

D. A. Antonovich; V. A. Gruzdev; V. G. Zalesskii

118

Saddle-field glow-discharge deposition of amorphous semiconductors  

SciTech Connect

The authors present a dc saddle-field glow-discharge deposition procedure which combines the positive attributes of the conventional dc and rf glow-discharge techniques. Preliminary mass spectra analyses of both silane and methane glow-discharges demonstrates that ions constitute a significant fraction of the species reaching the film surface. Growth rate analyses suggest that ions play a significant role in the saddle-field glow-discharge deposition of amorphous semiconducting films.

Gaspari, F.; Sidhu, L.S.; O`Leary, S.K.; Zukotynski, S. [Univ. of Toronto, Ontario (Canada). Dept. of Electrical and Computer Engineering

1996-12-31T23:59:59.000Z

119

Lighting Test Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Custom Projects Lighting Test Facilities SSL Guidelines Industrial Federal Agriculture LED Street and Area Lighting Field Test of Exterior LED Down Lights Abstract Outdoor...

120

Light Water Reactor Sustainability  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Light Water Reactor Sustainability ACCOMPLISHMENTS REPORT 2014 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Continuous nanoparticle generation and assembly by atmospheric pressure arc discharge  

E-Print Network (OSTI)

Continuous nanoparticle generation and assembly by atmospheric pressure arc discharge Jesse J. Cole a dc arc discharge plasma. The particles are positively charged by the arc and form a room temperature precursor materials.5,6 High temperature plasmas in the form of dc arc discharges led to the discovery

Jacobs, Heiko O.

122

Frequency spectrum analysis of electromagnetic waves radiated by electrical discharges  

Science Journals Connector (OSTI)

In this study, we analyzed the frequency spectrum of the electromagnetic waves radiated by an electric discharge as a basic method for developing an on-line diagnostic technique for power equipment installed inside closed-switchboards. In order to simulate ... Keywords: closed-switchboard, electromagnetic shielding room, electromagnetic wave, frequency spectrum, local discharge, series arc discharge

Hyeon-Kyu Cha; Sun-Jae Kim; Dae-Won Park; Gyung-Suk Kil

2011-03-01T23:59:59.000Z

123

Multiobjective optimization of the dry electric discharge machining process  

E-Print Network (OSTI)

January 15, 2009 Abstract Dry Electric Discharge Machining (EDM) is an environment­friendly modification: Electric Discharge Machining (EDM), Dry EDM, Design of experiments, Multi­objective optimization, NSGA II;1 Introduction Electric Discharge Machining (EDM) is a thermo­electric process in which material removal takes

Paris-Sud XI, Université de

124

NOPM and Availability of Framework Document for HID Lamps  

NLE Websites -- All DOE Office Websites (Extended Search)

8:48 Feb 27, 2012 8:48 Feb 27, 2012 Jkt 226001 PO 00000 Frm 00008 Fmt 4702 Sfmt 4702 E:\FR\FM\28FEP1.SGM 28FEP1 mstockstill on DSK4VPTVN1PROD with PROPOSALS Federal Register / Vol. 77, No. 39 / Tuesday, February 28, 2012 / Proposed Rules 11785 collections for particular program, except where required by statute. III. Questions for Comment The list below includes the questions about these reform ideas that address issues which are of greatest interest to OMB at this stage of the process. Comments addressing any other concerns, and other types of feedback, are also welcome. In addition, as was explained at the beginning of this notice, the public comments received by OMB will be posted on OMB's Web site and at http:// www.regulations.gov. Accordingly, please do not include in your comments

125

Gas mixture for diffuse-discharge switch  

DOE Patents (OSTI)

Gaseous medium in a diffuse-discharge switch of a high-energy pulse generator is formed of argon combined with a compound selected from the group consisting of CF/sub 4/, C/sub 2/F/sub 6/, C/sub 3/F/sub 8/, n-C/sub 4/F/sub 10/, WF/sub 6/, (CF/sub 3/)/sub 2/S and (CF/sub 3/)/sub 2/O.

Christophorou, L.G.; Carter, J.G.; Hunter, S.R.

1982-08-31T23:59:59.000Z

126

General Conditions Applicable to Water Discharge Permits and Procedures and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

General Conditions Applicable to Water Discharge Permits and General Conditions Applicable to Water Discharge Permits and Procedures and Criteria for Issuing Water Discharge Permits (Connecticut) General Conditions Applicable to Water Discharge Permits and Procedures and Criteria for Issuing Water Discharge Permits (Connecticut) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info State Connecticut Program Type Siting and Permitting Provider Department of Energy and Environmental Protection

127

Light Bodies: Exploring Interactions with Responsive Lights  

E-Print Network (OSTI)

reinterpretation of street lighting. Before fixed infrastructure illuminated cities at night, people carried Urban street lighting today is a networked, fixed infrastructure that relies on the electrical grid. WeLight Bodies: Exploring Interactions with Responsive Lights Susanne Seitinger MIT Media Laboratory

Hunt, Galen

128

Sensitive glow discharge ion source for aerosol and gas analysis  

DOE Patents (OSTI)

A high sensitivity glow discharge ion source system for analyzing particles includes an aerodynamic lens having a plurality of constrictions for receiving an aerosol including at least one analyte particle in a carrier gas and focusing the analyte particles into a collimated particle beam. A separator separates the carrier gas from the analyte particle beam, wherein the analyte particle beam or vapors derived from the analyte particle beam are selectively transmitted out of from the separator. A glow discharge ionization source includes a discharge chamber having an entrance orifice for receiving the analyte particle beam or analyte vapors, and a target electrode and discharge electrode therein. An electric field applied between the target electrode and discharge electrode generates an analyte ion stream from the analyte vapors, which is directed out of the discharge chamber through an exit orifice, such as to a mass spectrometer. High analyte sensitivity is obtained by pumping the discharge chamber exclusively through the exit orifice and the entrance orifice.

Reilly, Peter T. A. (Knoxville, TN)

2007-08-14T23:59:59.000Z

129

Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices to Save You Money Light your home for less money while using the same amount of light. How Energy-Efficient Light Bulbs Compare with Traditional Incandescents Energy-efficient light bulbs are available today and could save you about $50 per year in energy costs when you replace 15 traditional incandescent bulbs in your home.

130

Analysis of radiofrequency discharges in plasma  

DOE Patents (OSTI)

Separation of laser optogalvanic signals in plasma into two components: (1) an ionization rate change component, and (2) a photoacoustic mediated component. This separation of components may be performed even when the two components overlap in time, by measuring time-resolved laser optogalvanic signals in an rf discharge plasma as the rf frequency is varied near the electrical resonance peak of the plasma and associated driving/detecting circuits. A novel spectrometer may be constructed to make these measurements. Such a spectrometer would be useful in better understanding and controlling such processes as plasma etching and plasma deposition. 15 figs.

Kumar, D.; McGlynn, S.P.

1992-08-04T23:59:59.000Z

131

Analysis of radiofrequency discharges in plasma  

DOE Patents (OSTI)

Separation of laser optogalvanic signals in plasma into two components: (1) an ionization rate change component, and (2) a photoacoustic mediated component. This separation of components may be performed even when the two components overlap in time, by measuring time-resolved laser optogalvanic signals in an rf discharge plasma as the rf frequency is varied near the electrical resonance peak of the plasma and associated driving/detecting circuits. A novel spectrometer may be constructed to make these measurements. Such a spectrometer would be useful in better understanding and controlling such processes as plasma etching and plasma deposition.

Kumar, Devendra (Baton Rouge, LA); McGlynn, Sean P. (Baton Rouge, LA)

1992-01-01T23:59:59.000Z

132

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory Architectural Lighting Analysis in Virtual Lighting Laboratory Speaker(s): Mehlika Inanici Date: July 7, 2003 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Satkartar K. Kinney Virtual Lighting Laboratory is a Radiance-based lighting analysis tool and methodology that proposes transformations in the utilization of computer visualization in lighting analysis and design decision-making. It is a computer environment, where the user has been provided with matrices of illuminance and luminance values extracted from high dynamic range images. The principal idea is to provide the laboratory to the designer and researcher to explore various lighting analysis techniques instead of imposing limited number of predetermined metrics. In addition, it introduces an analysis approach for temporal and spatial lighting

133

The Potential Field in and around a Gas Discharge, and Its Influence on the Discharge Mechanism  

Science Journals Connector (OSTI)

In the first part of the paper, results on the spatial extension of cathode and anode fall regions in carbon arcs are reported. Potential-probe measurements reveal that the potential drop in front of either electrode is confined to less than one tenth of a millimeter. In the second part of the paper, the distortion of the potential field in and around any discharge, as caused by the non-uniform space charge distribution in the discharge, is discussed for the cases of a low current carbon arc and a negative point corona; for the latter case use was made of data by Loeb. The potential field distortions result in radial electric fields which, depending on their polarity, seem to hinder or support the radial expansion of the discharge. Potential-probe measurements in low and high current carbon arcs are in good agreement with this theoretical analysis and prove the transitional region between the distorted potential field in the arc and the undistorted potential field outside of the discharge to be a fairly thin one.

W. Finkelnburg and S. M. Segal

1951-08-01T23:59:59.000Z

134

DC Discharge Studies Using PIC-MCC: Unmagnetized Glow Discharge Theory Jeff Hammel & John Verboncoeur  

E-Print Network (OSTI)

in Gases. John Wiley and Sons, Inc., New York, 1939. · Yuri P. Raizer. Gas Discharge Physics. Springer-dimensional bounded plasma simulation codes. Journal of Computational Physics, 131:149-163, 1997. · John P bounded plasma simulation codes. Journal of Computational Physics, 104:321-328, 1993. · John P

Wurtele, Jonathan

135

Hydrothermal Heat Discharge In The Cascade Range, Northwestern United  

Open Energy Info (EERE)

Page Page Edit History Facebook icon Twitter icon » Hydrothermal Heat Discharge In The Cascade Range, Northwestern United States Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Hydrothermal Heat Discharge In The Cascade Range, Northwestern United States Details Activities (3) Areas (1) Regions (0) Abstract: Hydrothermal heat discharge in the Cascade Range includes the heat discharged by thermal springs, by "slightly thermal" springs that are only a few degrees warmer than ambient temperature, and by fumaroles. Thermal-spring heat discharge is calculated on the basis of chloride-flux measurements and geothermometer temperatures and totals ~ 240 MW in the U.S. part of the Cascade Range, excluding the transient post-1980 discharge

136

Point Source Discharges to Surface Waters (North Carolina) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Point Source Discharges to Surface Waters (North Carolina) Point Source Discharges to Surface Waters (North Carolina) Point Source Discharges to Surface Waters (North Carolina) < Back Eligibility Commercial Industrial Construction Transportation Savings Category Buying & Making Electricity Program Info State North Carolina Program Type Siting and Permitting Provider Department of Environment and Natural Resources This rule requires permits for control of sources of water pollution by providing the requirements and procedures for application and issuance of state National Pollutant Discharge Elimination System (NPDES) permits for a discharge from an outlet, point source, or disposal system discharging to the surface waters of the state, and for the construction, entering a contract for construction, and operation of treatment works with such a

137

Mobile lighting apparatus  

DOE Patents (OSTI)

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

138

Notice of Intent (NOI) for Storm Water Discharges Associated with  

Open Energy Info (EERE)

Intent (NOI) for Storm Water Discharges Associated with Intent (NOI) for Storm Water Discharges Associated with Construction Activities under TPDES General Permit (TXR150000) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference Material: Notice of Intent (NOI) for Storm Water Discharges Associated with Construction Activities under TPDES General Permit (TXR150000) Details Activities (0) Areas (0) Regions (0) Abstract: Unavailable Author(s): Unknown Published: Texas Commission on Environmental Quality, Date Unknown Document Number: Unavailable DOI: Unavailable Source: View Original Document Retrieved from "http://en.openei.org/w/index.php?title=Notice_of_Intent_(NOI)_for_Storm_Water_Discharges_Associated_with_Construction_Activities_under_TPDES_General_Permit_(TXR150000)&oldid=598006"

139

Design of a high precision desktop wire electrical discharge machine.  

E-Print Network (OSTI)

??This thesis discusses the design of a wire electrical discharge machine that is small enough to be deemed a desktop machine that achieves sub micron (more)

Dunlop, David James

2010-01-01T23:59:59.000Z

140

Cathode fall measurement in a dielectric barrier discharge in helium  

SciTech Connect

A method based on the zero-length voltage extrapolation is proposed to measure cathode fall in a dielectric barrier discharge. Starting, stable, and discharge-maintaining voltages were measured to obtain the extrapolation zero-length voltage. Under our experimental conditions, the zero-length voltage gave a cathode fall of about 185 V. Based on the known thickness of the cathode fall region, the spatial distribution of the electric field strength in dielectric barrier discharge in atmospheric helium is determined. The strong cathode fall with a maximum field value of approximately 9.25 kV/cm was typical for the glow mode of the discharge.

Hao, Yanpeng; Zheng, Bin; Liu, Yaoge [School of Electric Power, South China University of Technology, Guangzhou 510640 (China)] [School of Electric Power, South China University of Technology, Guangzhou 510640 (China)

2013-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

The effect of riverine discharge on biogeochemical processes in ...  

Science Journals Connector (OSTI)

A prolonged drought decreased river discharge, altered the salinity gradient in the estuary, and profoundly affected anaerobic respiratory processes in the...

142

Fiber optic diagnostic techniques for the electrical discharge machining process.  

E-Print Network (OSTI)

??Plasma sparks from an electrical discharge machining phics. (EDM) process were observed using fiber optics positioned the dielectric oil. New measurement techniques were developed to (more)

Pillans, Brandon William

2012-01-01T23:59:59.000Z

143

Contact glow discharge electrolysis for liquid waste processing  

E-Print Network (OSTI)

for an alka- line water electrolysis at a small pin verticaldischarge electrolysis applied to waste water treatment.water treatment induced by plasma with contact glow discharge electrolysis.

Sharma, Neeraj

2014-01-01T23:59:59.000Z

144

WAC - 173 - 221A - Wastewater Discharge Standards and Effluent...  

Open Energy Info (EERE)

Wastewater Discharge Standards and Effluent Limitations Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: WAC - 173 - 221A -...

145

WAC - 173 - 221 - Discharge Standards and Effluent Limitations...  

Open Energy Info (EERE)

WAC - 173 - 221 - Discharge Standards and Effluent Limitations for Domestic Wastewater Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

146

File:CDPHE Industrial Individual Wastewater Discharge Permit...  

Open Energy Info (EERE)

Industrial Individual Wastewater Discharge Permit Application.pdf Jump to: navigation, search File File history File usage Metadata File:CDPHE Industrial Individual Wastewater...

147

EPA - Ground Water Discharges (EPA's Underground Injection Control...  

Open Energy Info (EERE)

EPA - Ground Water Discharges (EPA's Underground Injection Control Program) webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: EPA - Ground Water...

148

Light Old and New  

Science Journals Connector (OSTI)

The Sun, Moon and stars have been our lights since the earliest times. We have learned ... have much more recently filled our homes and streets with artificial lighting. We are, however, in danger of...natural lights

Bob Mizon

2002-01-01T23:59:59.000Z

149

Specific light in sculpture  

E-Print Network (OSTI)

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

150

Lighting | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

to installing LEDs in existing fixtures. Tips and Advice Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes...

151

Natural lighting and skylights  

E-Print Network (OSTI)

There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work...

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

152

Parametric light generation  

Science Journals Connector (OSTI)

...potential to deliver coherent light with high spectral purity...universal constants such as the speed of light. Single- frequency CW...assessment of optical switching speeds in telecommunication technology...A (2003) Parametric light generation 2749 ment of...

2003-01-01T23:59:59.000Z

153

Lighting Group: Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Links Links Links Organizations Illuminating Engineering Society of North America (IESNA) International Commission on Illumination (CIE) International Association of Lighting Designers (IALD) International Association of Energy-Efficient Lighting Lightfair International Energy Agency - Task 21: Daylight in Buildings: Design Tools and Performance Analysis International Energy Agency - Task 31: Daylighting Buildings in 21st Century National Association on Qualifications for the Lighting Professions (NCQLP) National Association of Independent Lighting Distributors (NAILD) International Association of Lighting Management Companies (NALMCO) Research Centers California Lighting Technology Center Lighting Research Center Lighting Research at Canada Institute for Research in Construction

154

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center Technical Advisory Group Meeting August 31, 2007 10:30 AM - Noon Meeting Agenda * Introductions (10 minutes) * Main Presentation (~ 1 hour) * Questions, comments from panel (15 minutes) Project History * Lighting Scoping Study (completed January 2007) - Identified potential for energy and demand savings using demand responsive lighting systems - Importance of dimming - New wireless controls technologies * Advanced Demand Responsive Lighting (commenced March 2007) Objectives * Provide up-to-date information on the reliability, predictability of dimmable lighting as a demand resource under realistic operating load conditions * Identify potential negative impacts of DR lighting on lighting quality Potential of Demand Responsive Lighting Control

155

Modeling LED street lighting  

Science Journals Connector (OSTI)

LED luminaires may deliver precise illumination patterns to control light pollution, comfort, visibility, and light utilization efficiency. Here, we provide simple equations to...

Moreno, Ivan; Avendao-Alejo, Maximino; Saucedo-A, Tonatiuh; Bugarin, Alejandra

2014-01-01T23:59:59.000Z

156

Lighting | Open Energy Information  

Open Energy Info (EERE)

TODO: Add description List of Lighting Incentives Retrieved from "http:en.openei.orgwindex.php?titleLighting&oldid267174" Category: Articles with outstanding TODO tasks...

157

Energy parameters and stability of the discharge in a nonchain, self-sustained-discharge-pumped HF laser  

SciTech Connect

The generation and discharge are studied in a nonchain HF laser operating on mixtures of SF{sub 6} with hydrogen and hydrocarbons. The specific output energy of the laser is 8.8 J L{sup -1} (73 J L{sup -1} atm{sup -1}) and the total lasing efficiency is 5.5%. It is shown that the formation and maintaining of a volume discharge in self-sustained-discharge-pumped HF lasers with a large content of electronegative gases is caused by the accumulation of the volume discharge of negative ions in conducting regions. (letters)

Tarasenko, Viktor F; Orlovskii, Viktor M; Panchenko, Aleksei N [Institute of High Current Electronics, Siberian Branch, Russian Academy of Sciences, Tomsk (Russian Federation)

2001-12-31T23:59:59.000Z

158

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...  

Open Energy Info (EERE)

LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name: Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place: Morrisville,...

159

Light Duty Combustion Research: Advanced Light-Duty Combustion...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and...

160

Compact light source performance in recessed type luminaires  

SciTech Connect

Photometric comparisons were made with an indoor, recessed, type luminaire using incandescent, high intensity discharge and compact fluorescent lamps. The test results show substantial performance advantages, as expected, for the discharge light sources where the efficacy gains can be in the order for 400% even when including the ballast losses associated with the discharge lamps. The candlepower distribution patterns emerging from these luminaries are also different from those associated with the baseline incandescent lamps, and which are in some ways, even more desirable from a uniformity of illuminance perspective. A section on fluorescent lamp starting is also included which describes a system having excellent starting characteristics in terms of electrode starting temperature (RH/RC technique), proper operating frequency to minimize unwanted IR interactions, and satisfactory current crest factor values to help insure life performance.

Hammer, E.E.

1998-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

State Waste Discharge Permit application for industrial discharge to land: 200 East Area W-252 streams  

SciTech Connect

This document constitutes the WAC 173-216 State Waste Discharge Permit application for six W-252 liquid effluent streams at the Hanford Site. Appendices B through H correspond to Section B through H in the permit application form. Within each appendix, sections correspond directly to the respective questions on the application form. The appendices include: Product or service information; Plant operational characteristics; Water consumption and waterloss; Wastewater information; Stormwater; Other information; and Site assessment.

Not Available

1993-12-01T23:59:59.000Z

162

Nonlocal collisionless power absorption using effective viscosity model in inductively coupled plasma discharges  

SciTech Connect

Effective viscosity model for inductively coupled plasma (ICP) discharges has been used to calculate the power absorbed inside ICP discharges. It is found that it can be used to calculate collisionless heating, which is a warm plasma effect. The validity of effective viscosity model has been checked by comparing it with kinetic model for warm ICP discharges. For very small plasma lengths, the results of both models are the same. At intermediate lengths where bounce resonance heating is important, results of the two models are not the same. Bounce resonance length given by effective viscosity model does not match very well with that given by the kinetic model. It shows that bounce resonance heating cannot be taken care of accurately using the effective viscosity model. For large plasma length, when driving frequencies are low, power absorbed calculated using the kinetic model is more than that calculated by the effective viscosity model. For high driving frequencies, power absorbed calculated using the kinetic model is less than that calculated by the effective viscosity model. The best match between the results of two models (for large plasma length) is obtained if the combination of plasma density, electron temperature, driving frequency, and speed of light is such that the relation K={omega}{sub p}v{sub th}/{omega}c{approx_equal}1 holds. It is concluded that computationally less extensive effective viscosity model can be used to estimate power absorption in ICP discharges by calibrating it with the help of computationally intensive kinetic model. Once calibration is done a lot of computational effort can be avoided by using effective viscosity model instead of kinetic model.

Aman-ur-Rehman, [Pakistan Institute of Engineering and Applied Sciences, P.O. Nilore, Islamabad 45650 (Pakistan); Lee, J. K. [Department of Electronic and Electrical Engineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of)

2009-07-15T23:59:59.000Z

163

Noise-based wavelet denoising technique for partial discharge measurement  

Science Journals Connector (OSTI)

For enhancement the insulation quality of medium voltage and high voltage power cables, on-site partial discharge (PD) diagnosis tests such as detection, location and identification are used to find defects or faults and assess ageing degree of the cable ... Keywords: discrete wavelet transform, frequency-tuned resonance, oscilating voltage wave, partial discharge, power cables, very low frequency

Zhou-Sheng Zhang; Deng-Ming Xiao

2008-06-01T23:59:59.000Z

164

Pinch spot formation in high atomic number z discharges  

Science Journals Connector (OSTI)

A nonlinear, quasi-two-dimensional model for pinch spot formation in radiation-dominated, high atomic number z pinches is presented that reproduces the experimental electrical and radiation characteristics. The high line-radiation rates of such discharges produce localized, high-density pinch spots in contrast to the spindle pinches predicted for hydrogenic discharges.

D. Mosher and D. Colombant

1992-04-27T23:59:59.000Z

165

Decomposition of Naphthalene by dc Gliding Arc Gas Discharge  

Science Journals Connector (OSTI)

Decomposition of Naphthalene by dc Gliding Arc Gas Discharge ... In the air and oxygen gliding arc discharges, the naphthalene degradation is mainly governed by reactions with oxygen-derived radicals. ... Therefore, the local electric field strength is relatively low in argon gliding arc plasma. ...

Liang Yu; Xiaodong Li; Xin Tu; Yu Wang; Shengyong Lu; Jianhua Yan

2009-12-11T23:59:59.000Z

166

Relationships among probability distributions of stream discharges in floods, climate,  

E-Print Network (OSTI)

Relationships among probability distributions of stream discharges in floods, climate, bed load of both follow power laws. The number N(Q) of days on which the discharge exceeds Q, or the number of the United States. To examine the effect of climate change on bed load transport and river incision, we

Mojzsis, Stephen J.

167

Waste not Discharged to Surface Waters (North Carolina) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Waste not Discharged to Surface Waters (North Carolina) Waste not Discharged to Surface Waters (North Carolina) Waste not Discharged to Surface Waters (North Carolina) < Back Eligibility Commercial Industrial Construction Transportation Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State North Carolina Program Type Siting and Permitting The rules in this Subchapter apply to all persons proposing to construct, alter, extend, or operate any sewer system, treatment works, disposal system, contaminates soil treatment system, animal waste management system, stormwater management system or residual disposal/utilization system which does not discharge to surface waters of the state, including systems which discharge waste onto or below land surface.

168

LANL achieves milestone on path to zero wastewater discharge  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL achieves milestone on wastewater discharge LANL achieves milestone on wastewater discharge LANL achieves milestone on path to zero wastewater discharge Industrial wastewater will be recycled as the result of a long-term strategy to treat wastewater rather than discharging it into the environment. January 20, 2012 Aerial view of Los Alamos National Laboratory Aerial view of Los Alamos National Laboratory. Contact Colleen Curran Communications Office (505) 664-0344 Email Improved compliance while recycling millions of gallons of industrial wastewater LOS ALAMOS, New Mexico, January 20, 2012-Millions of gallons of industrial wastewater will be recycled at Los Alamos National Laboratory as the result of a long-term strategy to treat wastewater rather than discharging it into the environment. The U. S. Environmental Protection Agency, which issues permits for

169

Radio frequency discharge with control of plasma potential distribution  

SciTech Connect

A RF discharge plasma generator with additional electrodes for independent control of plasma potential distribution is proposed. With positive biasing of this ring electrode relative end flanges and longitudinal magnetic field a confinement of fast electrons in the discharge will be improved for reliable triggering of pulsed RF discharge at low gas density and rate of ion generation will be enhanced. In the proposed discharge combination, the electron energy is enhanced by RF field and the fast electron confinement is improved by enhanced positive plasma potential which improves the efficiency of plasma generation significantly. This combination creates a synergetic effect with a significantly improving the plasma generation performance at low gas density. The discharge parameters can be optimized for enhance plasma generation with acceptable electrode sputtering.

Dudnikov, Vadim [Muons, Inc., Batavia, Illinois 60510 (United States); Dudnikov, A. [BINP, Novosibirsk 63090 (Russian Federation)

2012-02-15T23:59:59.000Z

170

State Waste Discharge Permit application: 200-E Powerhouse Ash Pit  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations, the US Department and Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. This document constitutes the State Waste Discharge Permit application for the 200-E Powerhouse Ash Pit. The 200-E Powerhouse Ash Waste Water discharges to the 200-E Powerhouse Ash Pit via dedicated pipelines. The 200-E Ash Waste Water is the only discharge to the 200-E Powerhouse Ash Pit. The 200-E Powerhouse is a steam generation facility consisting of a coal-handling and preparation section and boilers.

Atencio, B.P.

1994-06-01T23:59:59.000Z

171

State Waste Discharge Permit application: 200-W Powerhouse Ash Pit  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations; the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. This document constitutes the State Waste Discharge Permit application for the 200-W Powerhouse Ash Pit. The 200-W Powerhouse Ash Waste Water discharges to the 200-W Powerhouse Ash Pit via dedicated pipelines. The 200-W Powerhouse Ash Waste Water is the only discharge to the 200-W Powerhouse Ash Pit. The 200-W Powerhouse is a steam generation facility consisting of a coal-handling and preparation section and boilers.

Atencio, B.P.

1994-06-01T23:59:59.000Z

172

Keeping the Lights on: Smart Storage for a Smart Grid  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the Lights On the Lights On Safe, Reliable, Clean and Affordable Smart Storage for a Smart Grid  Many applications: frequency regulation, renewable energy integration, black start, diurnal storage, T&D deferrals etc  Many technologies: Pumped Hydro, Compressed Air, Batteries, Flywheels, Ultra-Capacitors The Case for Lithium-Ion  Efficiency .... >> 95%  Energy Density.... 50% reduction in weight & volume  Response time.... 50 msec  Depth of Discharge.... > 80%  Cycle Life.... >> 3000 cycles  Charge time.... 15 minutes to 2 hrs  Low self-discharge.... << 3% per month  No maintenance  Cost Reduction & Innovation Roadmap + Adoption by other industries + Continuous Investment and innovation Economy of Scale Large Format Prismatic Cells

173

A System-Level Electrostatic-Discharge-Protection Modeling Methodology for Time-  

E-Print Network (OSTI)

A System-Level Electrostatic-Discharge- Protection Modeling Methodology for Time- Domain Analysis. Index Terms--Electromagnetic compatibility (EMC), electrostatic discharge (ESD), modeling, system level precise simulations of electrostatic discharge (ESD) stress propagation on a printed circuit board (PCB

Boyer, Edmond

174

Spectrally Enhanced Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 2007 November 2007 AfterImage + s p a c e 1 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Brian Liebel, PE, LC Brian Liebel, PE, LC November 29, 2007 November 29, 2007 Federal Utilities Partnership Working Group Federal Utilities Partnership Working Group November 29, 2007 November 29, 2007 29 November 2007 AfterImage + s p a c e 2 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting This is not a technology; just a This is not a technology; just a different way to quantify light based on different way to quantify light based on well established scientific findings well established scientific findings Can be used in conjunction with ANY Can be used in conjunction with ANY type of lighting design to gain

175

Wastewater Regulations for National Pollutant Discharge Elimination System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wastewater Regulations for National Pollutant Discharge Elimination Wastewater Regulations for National Pollutant Discharge Elimination System (NPDES) Permits, Underground Injection Control (UIC) Permits, State Permits, Water Quality Based Effluent Limitations and Water Quality Certification (Mississippi) Wastewater Regulations for National Pollutant Discharge Elimination System (NPDES) Permits, Underground Injection Control (UIC) Permits, State Permits, Water Quality Based Effluent Limitations and Water Quality Certification (Mississippi) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential

176

Experimental Investigation Of Atmospheric Pressure Surface Wave Discharges  

SciTech Connect

Microwave atmospheric pressure discharge in neon sustained by surface waves in a dielectric tube is considered. The plasma column length was measured versus absorbed microwave power for different discharge conditions. This gives a view on the wave propagation characteristics. The predicted dependence of discharge length on the total flux of wave power based on the modified model of non-equilibrium plasma is compared with experimental values. Moreover, we present results of spectroscopic investigations of the electron density. The electron density was determined using the method based on the Stark broadening of H{beta} spectral line. The spectroscopic results we shall use developing of a model of propagation of surface wave.

Czylkowski, D.; Jasinski, M.; Nowakowska, H.; Zakrzewski, Z. [The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-231 Gdansk (Poland)

2006-01-15T23:59:59.000Z

177

Electrohydraulic Discharge and Nonthermal Plasma for Water Treatment  

Science Journals Connector (OSTI)

The corona or corona-like system uses discharges of ?1 J/pulse, whereas the pulsed arc discharge uses energy of ?1 kJ/pulse and larger. ... AC, DC, and pulsed electric fields have been applied in conditions where the electrodes have been fully immersed in the liquid phase, where one electrode has been placed in an adjacent gas phase, and/or where arcing across the electrodes may occur. ... The electrohydraulic shock treatment of microorganisms was accomplished by discharging high-voltage electricity (8 to 15 kv.) across an electrode gap below the surface of aq. ...

B. R. Locke; M. Sato; P. Sunka; M. R. Hoffmann; J.-S. Chang

2005-12-31T23:59:59.000Z

178

Shoreline survey for unpermitted discharges to Galveston Bay  

SciTech Connect

The objectives of the study are to identify and map unpermitted point source discharges within selected shoreline segments of Galveston Bay and to develop a standard methodology and framework for future comprehensive shoreline surveys of the Galveston Bay system. The pilot study utilized low altitude aerial surveys and shallow draft small boat surveys to determine the extent of and to document locations of unpermitted discharges along 159 miles of bayou and bay shoreline. Nine different shoreline types were surveyed. Positions of discharges, both permitted and unpermitted were logged on to a personal computer data base management system and photographic documentation of both aerial and surface observations were catalogued.

Fay, R.R.; Sweet, S.; Wilson, R.J.

1991-08-01T23:59:59.000Z

179

Storm Water Discharge Permits (Wisconsin) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storm Water Discharge Permits (Wisconsin) Storm Water Discharge Permits (Wisconsin) Storm Water Discharge Permits (Wisconsin) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info Start Date 08/2004 State Wisconsin Program Type Siting and Permitting Provider Department of Natural Resources Wisconsin's storm water runoff regulations include permitting requirements for construction sites and industrial facilities, including those

180

2014-05-05 Issuance: Test Procedures for High-Intensity Discharge...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Test Procedures for High-Intensity Discharge Lamps; Supplemental Notice of Proposed Rulemaking 2014-05-05 Issuance: Test Procedures for High-Intensity Discharge Lamps; Supplemental...

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

E-Print Network 3.0 - active liquid discharges Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

discharge in synthetic air... Online at stacks.iop.orgJPhysD41035212 Abstract The barrier discharge in the coplanar ... Source: Greifswald, Ernst-Moritz-Arndt-Universitt...

182

Permit Program Regulating Discharge of Nondomestic Wastewater into a POTW (Ohio)  

Energy.gov (U.S. Department of Energy (DOE))

Any significant industrial user is required to apply for and obtain an individual indirect discharge permit if they discharge water or waste into a publicly owned treatment works.

183

Solid-State Lighting: Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solid-State Lighting Search Solid-State Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE » Building Technologies Office » Solid-State Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards.

184

Lighting Group: Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview Overview of the Lighting Research Group The Lighting Research Group at Lawrence Berkeley National Laboratory performs research aimed at improving the energy efficiency of lighting systems in buildings and homes, throughout the State of California and across the Nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research in the Lighting Group falls into three main areas: Sources and Ballasts, Light Distribution Systems and Controls and Communications. Click on a link below for more information about each of these research areas. Sources and Ballasts investigates next generation light sources, such as

185

Smart street lighting management  

Science Journals Connector (OSTI)

In this work, we propose a new street lighting energy management system in order to reduce ... demand meaning that energy, in this case light, is provided only when needed. In ... demand model, which in the case...

S. Pizzuti; M. Annunziato; F. Moretti

2013-08-01T23:59:59.000Z

186

Adaptive Street Lighting Controls  

Energy.gov (U.S. Department of Energy (DOE))

This two-partDOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components. In Part I, presenters Amy Olay of the City of...

187

Kyler Nelson Light Timer  

E-Print Network (OSTI)

designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

Kachroo, Pushkin

188

Electric-discharge intensification of the wool scouring process  

Science Journals Connector (OSTI)

The results of experiments on wool washing by high-voltage electric discharge in a liquid are presented. The efficiency of this method of washing is shown. The process of washing is considerably accelerated at...

A. A. Zubenko

2008-06-01T23:59:59.000Z

189

Plasma Grooving System Using Atmospheric Pressure Surface Discharge Plasma  

Science Journals Connector (OSTI)

To fabricate narrow front contact grooves on a single crystalline silicon solar cell, we carried out etching of a silicon nitride film on a silicon substrate using the surface discharge plasma operated at atmospheric

Toshiyuki Hamada; Tatsuya Sakoda; Masahisa Otsubo

2009-06-01T23:59:59.000Z

190

Radio-frequency glow discharge spectrometry:: A critical review  

Science Journals Connector (OSTI)

This paper presents a critical review of analytical radio frequency glow discharge spectrometry (rf-GDS). The historical foundations of rf-GDS are described, and current knowledge of the fundamental physics of analytical rf glow discharges is discussed. Additionally, instrumentation, methodologies, and applications of rf glow discharge optical emission spectrometry (rf-GDOES) and mass spectrometry (rf-GDMS) are reviewed. Although other rf-GDS techniques have appeared [e.g. rf glow discharge atomic absorption spectrophotometry (rf-GDAAS)], the emphasis is placed upon rf-GDOES and rf-GDMS, because they have received by far the most interest from analytical chemical metrologists. This review also provides explanations of some developments that are needed for further progress in the field of analytical rf-GDS.

Michael R. Winchester; Richard Payling

2004-01-01T23:59:59.000Z

191

Plasma of Electric Arc Discharge between Melted Electrodes  

Science Journals Connector (OSTI)

Plasma of electric arc discharge between melted electrodes was experimentally investigated. Diagnostics of electric arc plasma was carried out. Optical emission and ... in plasma tends to be located at the arc ax...

A.N. Veklich; I.L. Babich

2001-01-01T23:59:59.000Z

192

Problems of physical modeling of electric-arc discharges  

Science Journals Connector (OSTI)

Special features of physical modeling of high-current arc discharges are considered. It is shown that the employment of dimensionless criterial expressions makes it possible to establish only approximate simil...

O. I. Yas'ko

193

Effect of electric arc discharge on hypersonic blunt body drag  

Science Journals Connector (OSTI)

Experimental results on the effect of energy deposition using an electric arc discharge, upstream of a 60...half angle blunt cone configuration in a hypersonic flow is reported.Investigations involving drag meas...

K. Satheesh; G. Jagadeesh

2009-01-01T23:59:59.000Z

194

Spectral properties of a diffuse-constricted arc discharge  

Science Journals Connector (OSTI)

An extensive high-current electric discharge under atmospheric pressure is characterized by considerable instability, unless special measures for its stabilization are assumed (e.g., by the walls, electrodes, ...

V. O. German; A. P. Glinov; P. V. Kozlov; G. A. Lyubimov

2012-04-01T23:59:59.000Z

195

Velocity of the electric arc in a plasmatron discharge chamber  

Science Journals Connector (OSTI)

An experimental investigation of the velocity of a high-current arc with air injection in the discharge chamber of a coaxial sectioned plasmatron is described. The experiments showed that the velocity of the c...

A. S. Shaboltas

1969-09-01T23:59:59.000Z

196

CO2-laser gas discharges in narrow gaps  

Science Journals Connector (OSTI)

We have studied RF discharges as excitation mechanisms for distributed feedback (DFB) CO2 lasers. For CO2 laser plasmas the reduced electric fieldE/N has to be in a well-defined range. The reduced electric fields

W. Leuthard; F. K. Kneubhl; H. J. Schtzau

1989-01-01T23:59:59.000Z

197

Discharging a DC bus capacitor of an electrical converter system  

DOE Patents (OSTI)

A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

2014-10-14T23:59:59.000Z

198

Process characterization of Electrical Discharge Machining of highly doped silicon  

E-Print Network (OSTI)

Electrical Discharge Machining (EDM) is an advanced machining process that removes material via thermal erosion through a plasma arc. The machining process is accomplished through the application of high frequency current ...

Crawford, Gregory Allan

2012-01-01T23:59:59.000Z

199

WAC - 173 - 226 - Waste Discharge General Permit Program | Open...  

Open Energy Info (EERE)

Reference LibraryAdd to library Legal Document- RegulationRegulation: WAC - 173 - 226 - Waste Discharge General Permit ProgramLegal Published NA Year Signed or Took Effect 2002...

200

An ultra miniature pinch-focus discharge Leopoldo Soto1  

E-Print Network (OSTI)

Abstract As a way to investigate the minimum energy to produce a pinch plasma focus discharge, an ultra optimized plasma foci. It is interesting note that plasma parameters practically constant in plasma focus

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

A forevacuum pulse arc-discharge-based plasma electron source  

Science Journals Connector (OSTI)

An arc-discharge-based electron source is described, which is designed for forming a pulsed wideaperture electron beam in the forevacuum pressure range (4...2 in the submillisecond range of pulse durations. The c...

A. V. Kazakov; V. A. Burdovitsin; A. V. Medovnik

2013-11-01T23:59:59.000Z

202

Characteristics of discharge disruptions in the T-10 tokamak  

Science Journals Connector (OSTI)

The results of experimental studies of discharge disruptions in the T-10 tokamak at the limiting plasma density are presented. On the basis of measurements of the generated soft X-ray emission, for a group of ...

A. M. Stefanovskii; M. M. Dremin; A. M. Kakurin; A. Ya. Kislov

2013-06-01T23:59:59.000Z

203

DRIFT INSTABILITIES IN CYLINDRICAL DISCHARGES INVOLVING BOTH IONS AND ELECTRONS  

Science Journals Connector (OSTI)

...by the end-plates. This would be an effective means for generating thermonuclear fusion, provided the gas used in the central arc discharge is capable of thermonuclear fusion. When operated with the cylinder open-circuited, the efficiency...

Joseph Slepian

1964-01-01T23:59:59.000Z

204

Street light holography  

Science Journals Connector (OSTI)

The production of a hologram is demonstrated using only a camera aluminum foil and a mercury vapor street light.

R. R. Turtle

1977-01-01T23:59:59.000Z

205

Outdoor Lighting Resources  

Energy.gov (U.S. Department of Energy (DOE))

DOE offers a variety of resources to guide municipalities, utilities, and others in their evaluation of LED street lighting products.

206

Fiber optic diagnostic techniques for the electrical discharge machining process  

E-Print Network (OSTI)

FIBER OPTIC DIAGNOSTIC TECHNIQUES FOR THE ELECTRICAL DISCHARGE MACHINING PROCESS A Thesis by BRANDON WILLIAM PILLANS Submitted to the Office of Graduate Studies of Texas AB M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August t 998 Major Subject: Electrical Engineering FIBER OPTIC DIAGNOSTIC TECHNIQUES FOR THE ELECTRICAL DISCHARGE MACHINING PROCESS A Thesis by BRANDON WILLIAM PILLANS Submitted to Texas A8M University in partial...

Pillans, Brandon William

2012-06-07T23:59:59.000Z

207

Experimental Study on Gasoline Reforming Assisted by Nonthermal Arc Discharge  

Science Journals Connector (OSTI)

The gasoline conversion efficiency decreased when the electric discharge regime was changing from continuous to gliding arc and from gliding to streamer. ... Compared with catalytic reformers, plasma devices have so far lower performances, which is explained by the early stage of research on nonthermal plasma reforming and the need of an external energy input (electricity). ... and design of the plasma reactor, composed of two gliding arc discharges in series, were detailed. ...

Jean-Damien Rollier; Jos Gonzalez-Aguilar; Guillaume Petitpas; Adeline Darmon; Laurent Fulcheri; Rudolf Metkemeijer

2007-12-06T23:59:59.000Z

208

Drilling Waste Management Fact Sheet: Discharge to Ocean  

NLE Websites -- All DOE Office Websites (Extended Search)

Discharge to Ocean Discharge to Ocean Fact Sheet - Discharge to Ocean Past Practices In early offshore oil and gas development, drilling wastes were generally discharged from the platforms directly to the ocean. Until several decades ago, the oceans were perceived to be limitless dumping grounds. During the 1970s and 1980s, however, evidence mounted that some types of drilling waste discharges could have undesirable effects on local ecology, particularly in shallow water. When water-based muds (WBMs) were used, only limited environmental harm was likely to occur, but when operators employed oil-based muds (OBMs) on deeper sections of wells, the resulting cuttings piles created impaired zones beneath and adjacent to the platforms. At some North Sea locations, large piles of oil-based cuttings remain on the sea floor near the platforms. Piles of oil-based cuttings can affect the local ecosystem in three ways: by smothering organisms, by direct toxic effect of the drilling waste, and by anoxic conditions caused by microbial degradation of the organic components in the waste. Current regulatory controls minimize the impacts of permitted discharges of cuttings.

209

Improved plasma uniformity in a discharge system with electron injection  

SciTech Connect

We present the results of experiments leading to improvement in bulk plasma uniformity of a constricted-arc discharge system with electron injection. The steady-state discharge was in argon, at a gas pressure of 0.5 mTorr, and operated with a main discharge voltage between 20 and 100 V and current between 3 and 15 A. The radial plasma distribution was measured with a movable Langmuir probe. We find that geometric modification of the intermediate electrode exit aperture and the main discharge cathode add little to the plasma uniformity. Improved bulk plasma uniformity is observed when a special distributing grid electrode is used and the main discharge voltage is less than 20-30 V. The application of a weakly divergent magnetic field in the region of the intermediate electrode exit aperture decreases the plasma nonuniformity from 20% to 14% over a radial distance of 30 cm. The plasma uniformity was further improved by compensating the magnetic self-field of the injected electron beam by a reverse magnetic field produced with a special electrode compensator. It is shown that an increase in discharge current causes a proportional increase in back current in the distributing electrode. The approach allows a decrease in plasma nonuniformity from 20% to 13% over a radial distance of 30 cm.

Vizir, A. V.; Tyunkov, A. V.; Shandrikov, M. V. [Institute of High Current Electronics, Siberian Division, Russian Academy Science, Tomsk 634055 (Russian Federation)

2009-02-15T23:59:59.000Z

210

Interaction of a surface glow discharge with a gas flow  

SciTech Connect

A surface glow discharge in a gas flow is of particular interest as a possible tool for controlling the flow past hypersonic aircrafts. Using a hydrodynamic model of glow discharge, two-dimensional calculations for a kilovolt surface discharge in nitrogen at a pressure of 0.5 Torr are carried out in a stationary gas, as well as in a flow with a velocity of 1000 m/s. The discharge structure and plasma parameters are investigated near a charged electrode. It is shown that the electron energy in a cathode layer reaches 250-300 eV. Discharge is sustained by secondary electron emission. The influence of a high-speed gas flow on the discharge is considered. It is shown that the cathode layer configuration is flow-resistant. The distributions of the electric field and electron energy, as well as the ionization rate profile in the cathode layer, do not change qualitatively under the action of the flow. The basic effect of the flow's influence is a sharp decrease in the region of the quasineutral plasma surrounding the cathode layer due to fast convective transport of ions.

Aleksandrov, A. L., E-mail: a_alex@itam.nsc.ru; Schweigert, I. V. [Russian Academy of Sciences, Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch (Russian Federation)

2010-05-15T23:59:59.000Z

211

State waste discharge permit application, 200-E chemical drain field  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect ground would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE 91NM-177, (Ecology and DOE-RL 1991). The Consent Order No. DE 91NM-177 requires a series of permitting activities for liquid effluent discharges. This document presents the State Waste Discharge Permit (SWDP) application for the 200-E Chemical Drain Field. Waste water from the 272-E Building enters the process sewer line directly through a floor drain, while waste water from the 2703-E Building is collected in two floor drains, (north and south) that act as sumps and are discharged periodically. The 272-E and 2703-E Buildings constitute the only discharges to the process sewer line and the 200-E Chemical Drain Field.

Not Available

1994-06-01T23:59:59.000Z

212

Light emitting device comprising phosphorescent materials for white light generation  

DOE Patents (OSTI)

The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

Thompson, Mark E.; Dapkus, P. Daniel

2014-07-22T23:59:59.000Z

213

Resonant energy transfer in light harvesting and light emitting applications.  

E-Print Network (OSTI)

??The performance of light emitting and light harvesting devices is improved by utilising resonant energy transfer. In lighting applications, the emission energy of a semiconductor (more)

Chanyawadee, Soontorn

2009-01-01T23:59:59.000Z

214

Solid-State Lighting: Solid-State Lighting Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Videos to Solid-State Lighting Videos to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Videos on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Videos on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Videos on Google Bookmark Solid-State Lighting: Solid-State Lighting Videos on Delicious Rank Solid-State Lighting: Solid-State Lighting Videos on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Videos on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Solid-State Lighting Videos On this page you can access DOE Solid-State Lighting (SSL) Program videos. Photo of a museum art gallery with LED lights in track fixtures overhead. The City of Los Angeles LED Streetlight Program

215

Solid-State Lighting: Solid-State Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards. Register Now for DOE's 11th Annual SSL R&D Workshop January 28-30, join other SSL R&D professionals from industry, government, and academia to learn, share, and shape the future of lighting.

216

Solid-State Lighting: Solid-State Lighting Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

About the About the Program Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting Contacts to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Contacts on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Contacts on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Google Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Delicious Rank Solid-State Lighting: Solid-State Lighting Contacts on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Contacts on AddThis.com... Contacts Partnerships Solid-State Lighting Contacts For information about Solid-State Lighting, contact James Brodrick Lighting Program Manager Building Technologies Office U.S. Department of Energy

217

Solid-State Lighting: Adaptive Street Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Street Lighting Adaptive Street Lighting Controls to someone by E-mail Share Solid-State Lighting: Adaptive Street Lighting Controls on Facebook Tweet about Solid-State Lighting: Adaptive Street Lighting Controls on Twitter Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Google Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Delicious Rank Solid-State Lighting: Adaptive Street Lighting Controls on Digg Find More places to share Solid-State Lighting: Adaptive Street Lighting Controls on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Adaptive Street Lighting Controls This two-part DOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components.

218

Control of light speed: From slow light to superluminal light  

E-Print Network (OSTI)

A scheme for controlling light speed from slower-than-c to faster-than-c in an atomic system is presented in this paper. The scheme is based on far detuning Raman effect. Two far detuning coupling fields with small frequency difference will produce two absorptive peaks for the probe field in a $\\Lambda$ structure, and an optical pump between the two ground states can change the absorptive peaks into enhanced peaks, which makes the normal dispersion between the two peaks change into anomalous dispersion, so the probe field can change from slow light to superluminal propagation.

Qun-Feng Chen; Yong-Sheng Zhang; Bao-Sen Shi; Guang-Can Guo

2008-07-01T23:59:59.000Z

219

Emerging Lighting Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Lighting Technology Emerging Lighting Technology Bruce Kinzey Pacific Northwest National Laboratory FUPWG - Portland, OR April 20, 2011 www.ssl.energy.gov 2 | Solid-State Lighting Program GATEWAY Demonstration Program * Purpose: demonstrate new SSL products in real-world applications that save energy, match or improve illumination, and are cost- effective * Demos generate critical field experience providing: - Feedback to manufacturers - Data for utility incentives - Market readiness of specific applications to users - Advancement in lighting knowledge Central Park, NY Photo: Ryan Pyle Smithsonian American Art Museum, Washington, D.C. Photo: Scott Rosenfeld www.ssl.energy.gov 3 | Solid-State Lighting Program LED Product Explosion www.ssl.energy.gov 4 | Solid-State Lighting Program LEDs are Not a Universal Lighting

220

SMART LIGHTING SYSTEMS ULTIMATE LIGHTING The Smart Lighting  

E-Print Network (OSTI)

Integration (Holistic Integrated Design) · Sensors as important as LEDs · Interconnected systems (human, building, grid) · Artistic Design Freedom · Lighting is Health, Entertainment, Information and Illumination Cost at any brightness · Chip level integrated electronics THE ERC RESEARCH COVERS THE ENTIRE SUPPLY

Linhardt, Robert J.

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Solid-State Lighting: Solid-State Lighting Manufacturing Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Solid-State Lighting Manufacturing Workshop to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Google Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Delicious Rank Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on AddThis.com... Conferences & Meetings Past Conferences Presentations Publications Webcasts Videos Tools Solid-State Lighting Manufacturing Workshop Nearly 200 lighting industry leaders, chip makers, fixture and component

222

Characteristics of the plasma jet by applying a pseudo-spark discharge , M.Watanabea+  

E-Print Network (OSTI)

is measured by using an electric probe technique. In this experiment of the discharge current is 10 k, because the discharge changes from the glow to arc mode in the high current discharge. Consequently of electrons along a line of electric force. and effects play an essential role in the discharge formation

Paris-Sud XI, Université de

223

Thermodynamics and Kinetics Analysis of Gasoline Reforming Assisted by Arc Discharge  

Science Journals Connector (OSTI)

Thermodynamics and Kinetics Analysis of Gasoline Reforming Assisted by Arc Discharge ... In the first one, the electric discharge is accounted for as a homogeneous energy source inside the whole reactor. ... kinetic schemes, without inclusion of specific plasma processes, is sufficient for simulation of H prodn. in discharges with hot plasmas, in particular, in low-current arc discharges. ...

Jean-Damien Rollier; Guillaume Petitpas; Jos Gonzalez-Aguilar; Adeline Darmon; Laurent Fulcheri; Rudolf Metkemeijer

2008-04-18T23:59:59.000Z

224

CX-004636: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6: Categorical Exclusion Determination 6: Categorical Exclusion Determination CX-004636: Categorical Exclusion Determination Texas- City- Waco CX(s) Applied: B1.32, B2.5, B5.1 Date: 11/30/2010 Location(s): Waco, Texas Office(s): Energy Efficiency and Renewable Energy Energy Efficiency and Conservation Block Grant Program. 1) Installation of new heating, ventilation, and air conditioning system in New Police Building (former Medical Tower), 2) replace windows or replace gaskets in windows of New Police Building, 3) lighting upgrades to 23 existing city buildings with energy efficient lighting, and 4) replace city of Waco high intensity discharge (HID) street lighting with light-emitting diode lighting. DOCUMENT(S) AVAILABLE FOR DOWNLOAD CX-004636.pdf More Documents & Publications CX-004632: Categorical Exclusion Determination

225

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

May 1912), 783. 8. "New Street Lights Increase Trade 3 5 Perlight, including street light, became part of America'sBeautiful-inspired street lights graced wealthy residen

Holden, Alfred

1992-01-01T23:59:59.000Z

226

Ultraviolet-B radiation enhancement in dielectric barrier discharge based xenon chloride exciplex source by air  

SciTech Connect

A single barrier dielectric barrier discharge tube of quartz with multi-strip Titanium-Gold (Ti-Au) coatings have been developed and utilized for ultraviolet-B (UV-B) radiation production peaking at wavelength 308?nm. The observed radiation at this wavelength has been examined for the mixtures of the Xenon together with chlorine and air admixtures. The gas mixture composition, chlorine gas content, total gas pressure, and air pressure dependency of the UV intensity, has been analyzed. It is found that the larger concentration of Cl{sub 2} deteriorates the performance of the developed source and around 2% Cl{sub 2} in this source produced optimum results. Furthermore, an addition of air in the xenon and chlorine working gas environment leads to achieve same intensity of UV-B light but at lower working gas pressure where significant amount of gas is air.

Gulati, P., E-mail: pgulati1512@gmail.com [CSIR-Central Electronics Engineering Research Institute (CSIR-CEERI), Pilani, Rajasthan-333031 (India); Department of Physics, Banasthali University, P.O. Banasthali Vidyapith, Rajasthan 304022 (India); Prakash, R.; Pal, U. N.; Kumar, M. [CSIR-Central Electronics Engineering Research Institute (CSIR-CEERI), Pilani, Rajasthan-333031 (India); Vyas, V. [Department of Physics, Banasthali University, P.O. Banasthali Vidyapith, Rajasthan 304022 (India)

2014-07-07T23:59:59.000Z

227

Diagnostic of the self-healing of metallized polypropylene film by modeling of the broadening emission lines of aluminum emitted by plasma discharge  

SciTech Connect

Metallized-film capacitors have the property, even under high continuous voltage, to self-heal i.e., to clear a defect in the dielectric. The self-healing process is a consequence of a transient arc discharge. It has been previously shown that during the discharge, due to Joule effect, the metal is vaporized until the arc extinguishes. The discharge duration has been found to be inversely proportional to the mechanical pressure applied on the layers of metallized films making up a capacitor. The aim of this study is to understand the physical processes involved in this spontaneous extinction of the arc discharge. Emission spectroscopy has been used to provide information about the physical properties (temperatures, electronic and neutral particles densities, etc.) of the plasma induces by a self-healing. An analysis, based on the broadenings and shifts of Al atomic lines, of the experimental light spectra obtained has shown that the self-healing process leads to the generation, from the vaporized metal, of a high-density and relatively weakly ionized aluminum plasma. The plasma density increases with the pressure applied on the film layers and, consequently, the density power needed to extend the plasma zone increases as well and the arc discharge goes out faster as experimentally observed.

Tortai, J.-H.; Bonifaci, N.; Denat, A.; Trassy, C. [Laboratoire d'Electrostatique et de Materiaux Dielectriques, Centre National de la Recherche Scientifique (CNRS), Joseph Fourier University, 25 Avenue des Martyrs, 38000 Grenoble (France); Elaboration par Procedes Magnetiques, Centre National de la Recherche Scientifique (CNRS), 38402 Saint Martin d'Heres (France)

2005-03-01T23:59:59.000Z

228

Capillary - Discharge Based Hand-Held Detector For Chemical Vapor Monitoring  

DOE Patents (OSTI)

A handheld/portable detector for chemical vapor monitoring includes a housing and a discharge chamber that is established therein. The plasma discharge has a relatively small volume, e.g., in the micro-liter range. A first electrode and a second electrode are disposed within the discharge chamber and a discharge gap is established therebetween. A sample gas tube is in fluid communication with the discharge chamber and provides a sample gas to the discharge chamber. Also, a plasma gas tube is in fluid communication with the discharge chamber and provides a plasma gas thereto. Accordingly, the plasma gas can be used to maintain microplasma discharge between the electrodes and the sample gas can be introduced into the microplasma discharge. A spectrometer optically connected to the handheld/portable detector is used to measure the radiation emitted by the sample gas when subjected to the microplasma discharge.

Duan, Yixiang (White Rock, NM)

2005-05-31T23:59:59.000Z

229

Rules and Regulations Pertaining to a User Fee System for Point Source Dischargers that Discharge Pollutants into the Waters of the State (Rhode Island)  

Energy.gov (U.S. Department of Energy (DOE))

These regulations establish a user fee system for point source dischargers that discharge pollutants into the surface waters of the State. The funds from such fees are used by the Department of...

230

Discharge and emission parameters of a plasma electron source based on a discharge in crossed E H fields with various cathode materials  

Science Journals Connector (OSTI)

A plasma electron source (PES) based on a discharge in...E H...fields is developed and tested. The working gas is supplied to a quasi-closed PES discharge chamber, in which the conditions for effective ionizati...

A. P. Dostanko; D. A. Golosov

2009-10-01T23:59:59.000Z

231

Health risk assessment for radium discharged in produced waters  

SciTech Connect

Produced water generated during the production of oil and gas can contain enhanced levels of radium. This naturally occurring radioactive material (NORM) is discharged into freshwater streams, estuarine, coastal and outer continental shelf waters. Large volumes of produced waters are discharged to coastal waters along the Gulf Coast of Louisiana. The Gulf of Mexico is an important producer of fish and shellfish, and there is concern that radium discharged to coastal Louisiana could contaminate fish and shellfish used by people for food, and present a significant increase in cancer risk. This paper describes a screening-level assessment of the potential cancer risks posed by radium discharged to coastal Louisiana in oil-field produced waters. This screening analysis was performed to determine if a more comprehensive and realistic assessment is necessary, and because of the conservative assumptions embedded in the analysis overestimates the risk associated with the discharge of radium in produced waters. Two isotopes of radium (Ra-226 and Ra-228) are the radionuclides of most concern in produced water in terms of potential human health effects.

Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

1991-01-01T23:59:59.000Z

232

Health risk assessment for radium discharged in produced waters  

SciTech Connect

Produced water generated during the production of oil and gas can contain enhanced levels of radium. This naturally occurring radioactive material (NORM) is discharged into freshwater streams, estuarine, coastal and outer continental shelf waters. Large volumes of produced waters are discharged to coastal waters along the Gulf Coast of Louisiana. The Gulf of Mexico is an important producer of fish and shellfish, and there is concern that radium discharged to coastal Louisiana could contaminate fish and shellfish used by people for food, and present a significant increase in cancer risk. This paper describes a screening-level assessment of the potential cancer risks posed by radium discharged to coastal Louisiana in oil-field produced waters. This screening analysis was performed to determine if a more comprehensive and realistic assessment is necessary, and because of the conservative assumptions embedded in the analysis overestimates the risk associated with the discharge of radium in produced waters. Two isotopes of radium (Ra-226 and Ra-228) are the radionuclides of most concern in produced water in terms of potential human health effects.

Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

1991-12-31T23:59:59.000Z

233

Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Pedestrian-Friendly Nighttime Pedestrian-Friendly Nighttime Lighting to someone by E-mail Share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Facebook Tweet about Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Twitter Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Google Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Delicious Rank Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Digg Find More places to share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Pedestrian-Friendly Nighttime Lighting This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety,

234

Lighting Research Group: Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities Lighting Research Facilities at LBNL gonio-photometer Gonio-photometer We use this device to measure the intensity and direction of the light from a lamp or fixture. integrating sphere Integrating sphere This instrument allows us to get a fast and accurate measurement of the total light output of a lamp. We are not able to determine the direction of the light, only the intensity. power analyzer Power analyzer We use our power analyzer with the lamps in the gonio-photometer to measure input power, harmonic distortion, power factor, and many other signals that tell us how well a lamp is performing. spectro-radiometer Spectro-radiometer This device measures not only the intensity of a light source but also the intensity of the light at each wavelength.

235

Lighting Group: Software  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Software Lighting Software The Lighting Group has developed several computer programs in the course of conducting research on energy efficient lighting. Several of these programs have proven useful outside the research environment. One of the most popular programs for advanced lighting applications is Radiance. For more information on this program and its availability, click on the link below. RADIANCE Radiance is a suite of programs for the analysis and visualization of lighting in design. The primary advantage of Radiance over simpler lighting calculation and rendering tools is that there are no limitations on the geometry or the materials that may be simulated. Radiance is used by architects and engineers to predict illumination, visual quality and appearance of innovative design spaces, and by researchers to evaluate new

236

Fast oscillatory behavior of the excited xenon density in the discharge cells of a plasma display panel  

SciTech Connect

Fast oscillation of the excited xenon density occurs universally after an electrical discharge in the cells of a plasma display panel. A theoretical model based on ion plasma oscillation simulates this oscillatory behavior of the excited xenon density reasonably well. The magnitude and lifetime of the excited xenon density in a metastable state depend highly on the electrode configuration. Particularly, T-type electrodes provide better generation and confinement of excited xenon atoms for an abundant emission of 173 nm ultraviolet light at a high level of efficiency.

Uhm, Han S. [Department of Molecular Science and Technology, Ajou University, Suwon 443-749 (Korea, Republic of); Choi, Eun H. [Department of Electrophysics, PDP Research Center, Kwangwoon University, Seoul 139-701 (Korea, Republic of)

2009-03-15T23:59:59.000Z

237

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

238

High efficiency incandescent lighting  

DOE Patents (OSTI)

Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

2014-09-02T23:59:59.000Z

239

Total Light Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Management Light Management Why is saving Energy Important World Electricity Consumption (2007) Top 20 Countries 0 500 1000 1500 2000 2500 3000 3500 4000 4500 U n i t e d S t a t e s C h i n a J a p a n R u s s i a I n d i a G e r m a n y C a n a d a A f r i c a F r a n c e B r a z i l K o r e a , S o u t h U n i t e d K i n g d o m I t a l y S p a i n A u s t r a l i a T a i w a n S o u t h A f r i c a M e x i c o S a u d i A r a b i a I r a n Billion kWh Source: US DOE Energy Information Administration Lighting Control Strategies 4 5 6 Occupancy/Vacancy Sensing * The greatest energy savings achieved with any lighting fixture is when the lights are shut off * Minimize wasted light by providing occupancy sensing or vacancy sensing 7 8 Daylight Harvesting * Most commercial space has enough natural light flowing into it, and the amount of artificial light being generated can be unnecessary * Cut back on the production of artificial lighting by

240

Domestic Lighting and Heating  

Science Journals Connector (OSTI)

... a 14 22 feet room with a nice spacious window at each end admitting surreptitious draughts in proportion to the amount of light they let in. ...

M. GHEURY DE BRAY

1926-02-06T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Comparing Light Bulbs  

Energy.gov (U.S. Department of Energy (DOE))

In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

242

Theory and Experiments Relating to the Striated Glow Discharge in Mercury Vapor  

Science Journals Connector (OSTI)

Theory of the glow discharge in a monatomic gas.For the case of parallel plane electrodes with a hot cathode as source of electrons, the potential distribution and ion concentration in the Crookes dark space, negative glow, Faraday dark space and positive column are shown to be predictable from considerations of space charge and of ionization and excitation of the gas. While with weak currents there is a negative space charge throughout, sufficiently intense ionization is shown to lead to a cathode drop, followed by a region of reversed electric field in which positive ions and electrons both move toward the anode by diffusion, owing to their large concentration gradient. Still farther from the cathode the field changes to its normal direction and increases up to the positive column. In the positive column the field and concentration are uniform unless atoms excited by electron impacts in certain layers are prevented from diffusing between the layers, when striations may be obtained with periodic changes of field and of concentration. The cathode edge of each striation has a positive space charge. The theory of the arc discharge is essentially the same, the arc being simply the negative glow of the longer glow discharge.Glow discharge in mercury vapor.Various predictions of the above theory were verified by experiments with Hg vapor in vacuum tubes provided with hot cathodes. (1) Potential distribution and ion concentration were investigated by Langmuir's modified probe method and found to agree with the theoretical deductions, except that the concentration of positive ions in the positive column comes out too large. This result indicates the presence of negative mercury ions. (2) The distribution of velocities of electrons is Maxwellian except between striations. (3) The emission of light seems associated more with excitation by electron collision than with ionization and recombination. (4) Conditions for existence of striations. Striations are not found in pure Hg vapor unless the current is small or some substance like H2 is introduced to remove excited atoms. (5) The presence of atomic hydrogen which should be produced in the process of removing excited Hg atoms was proved by use of tungsten oxide. (6) Introduction of He, which cannot remove excited atoms, does not tend to produce striations. (7) The relative concentrations of excited atoms was determined from the optical absorption of subordinate series Hg lines. It was found that excited atoms exist in striations but not in the regions between, and are more numerous if the amount of H2 impurity is reduced.Band spectrum of HgH seems associated with the action of excited Hg atoms on hydrogen, and is emitted as a result of inelastic collisions in striations.

K. T. Compton; Louis A. Turner; W. H. McCurdy

1924-12-01T23:59:59.000Z

243

Distribution, relative abundance and species composition of shrimp, crabs and fish in the intake area, discharge canal and cooling lake of the Cedar Bayou generating station, Baytown, Texas  

E-Print Network (OSTI)

area and discharge waters of Houston Lighting S Power Company's Cedar Bayou Generating Station, Baytown, Texas. Hydrological data were taken at each sampling station. A total of 12 species of crustaceans and 53 species of fish was captured. The 10... juvenile stages risk entrainment through the plant (Mihursky and Kennedy 1967; Bascom 1974) or impingement on the intake screens. As Landry (1977) found, the impact of either entrainment or impingement depends mainly on the season of recruitment...

St. Clair, Lou Ann

2012-06-07T23:59:59.000Z

244

Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters-  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters- Lessons Learned From Mammoth Mountain, Usa Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters- Lessons Learned From Mammoth Mountain, Usa Details Activities (3) Areas (1) Regions (0) Abstract: A major campaign to quantify the magmatic carbon discharge in cold groundwaters around Mammoth Mountain volcano in eastern California was carried out from 1996 to 1999. The total water flow from all sampled cold springs was >=1.8_107 m3/yr draining an area that receives an estimated

245

Electron energy distribution function control in gas discharge plasmas  

SciTech Connect

The formation of the electron energy distribution function (EEDF) and electron temperature in low temperature gas discharge plasmas is analyzed in frames of local and non-local electron kinetics. It is shown, that contrary to the local case, typical for plasma in uniform electric field, there is the possibility for EEDF modification, at the condition of non-local electron kinetics in strongly non-uniform electric fields. Such conditions naturally occur in some self-organized steady state dc and rf discharge plasmas, and they suggest the variety of artificial methods for EEDF modification. EEDF modification and electron temperature control in non-equilibrium conditions occurring naturally and those stimulated by different kinds of plasma disturbances are illustrated with numerous experiments. The necessary conditions for EEDF modification in gas discharge plasmas are formulated.

Godyak, V. A. [Electrical Engineering and Computer Science Department, University of Michigan, Ann Arbor, Michigan 48109, USA and RF Plasma Consulting, Brookline, Massachusetts (United States)] [Electrical Engineering and Computer Science Department, University of Michigan, Ann Arbor, Michigan 48109, USA and RF Plasma Consulting, Brookline, Massachusetts (United States)

2013-10-15T23:59:59.000Z

246

Electric Discharge Machining (EDM) Projects (4584), 4/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Discharge Machining (EDM) Projects (4584) Electric Discharge Machining (EDM) Projects (4584) Program or Field Office: Y -12 Site Office Location(s) (Citv/Countv/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to installation of oil submerged Electric Discharge Machining (EDM) for development and production use. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) [{Jrhe proposal fits within a class of actions that is listed in Appendix A orB to 10 CFR Part 1021, Subpart D.

247

State Waste Discharge Permit application, 100-N Sewage Lagoon  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173--216 (or 173--218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE 91NM-177, (Ecology and DOE-RL 1991). This document constitutes the State Waste Discharge Permit application for the 100-N Sewage Lagoon. Since the influent to the sewer lagoon is domestic waste water, the State Waste Discharge Permit application for Public Owned Treatment Works Discharges to Land was used. Although the 100-N Sewage Lagoon is not a Public Owned Treatment Works, the Public Owned Treatment Works application is more applicable than the application for industrial waste water. The 100-N Sewage Lagoon serves the 100-N Area and other Hanford Site areas by receiving domestic waste from two sources. A network of sanitary sewer piping and lift stations transfers domestic waste water from the 100-N Area buildings directly to the 100-N Sewage Lagoon. Waste is also received by trucks that transport domestic waste pumped from on site septic tanks and holding tanks. Three ponds comprise the 100-N Sewage Lagoon treatment system. These include a lined aeration pond and stabilization pond, as well as an unlined infiltration pond. Both piped-in and trucked-in domestic waste is discharged directly into the aeration pond.

Not Available

1994-06-01T23:59:59.000Z

248

Lakeview Light and Power - Commercial Lighting Rebate Program | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program < Back Eligibility Commercial Fed. Government Local Government Nonprofit State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source Funded by Bonneville Power Administration Expiration Date 9/1/2013 State District of Columbia Program Type Utility Rebate Program Rebate Amount Commercial Lighting Installation: Up to 70% of cost Provider Lakeview Light and Power Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is funded by BPA and ends in September of 2010 or earlier if the funding is exhausted. Lakeview Light

249

Regulations For State Administration Of The National Pollutant Discharge  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

For State Administration Of The National Pollutant For State Administration Of The National Pollutant Discharge Elimination System (Arkansas) Regulations For State Administration Of The National Pollutant Discharge Elimination System (Arkansas) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info State Arkansas Program Type Siting and Permitting Provider Department of Environmental Quality The Regulations For State Administration Of The National Pollutant

250

High-power pulse modulator with ignitron discharger  

SciTech Connect

The high-power pulse modulator described here is used to produce spatial gaseous discharges and has an improved, controllable charging circuit, which permits a type ITR-4 ignitron discharger to be employed in a frequency mode as the basic commutator. The modulator is utilized in two modes: at a pulse repetition frequency of 50 Hz pulses are formed that have a duration of 25 usec and energies up to 3.5 kJ and at a frequency of 200 Hz, the pulses have a duration of -2 usec and energies up to 600 J. In all conditions the modulator operated stably with a wide range of load changes.

Anisimova, T.E.; Akkuratov, E.V.; Artemov, V.A.; Gromovenko, V.M.; Kalinin, V.P.; Nikonov, V.P.

1985-10-01T23:59:59.000Z

251

Multifunctional bulk plasma source based on discharge with electron injection  

SciTech Connect

A bulk plasma source, based on a high-current dc glow discharge with electron injection, is described. Electron injection and some special design features of the plasma arc emitter provide a plasma source with very long periods between maintenance down-times and a long overall lifetime. The source uses a sectioned sputter-electrode array with six individual sputter targets, each of which can be independently biased. This discharge assembly configuration provides multifunctional operation, including plasma generation from different gases (argon, nitrogen, oxygen, acetylene) and deposition of composite metal nitride and oxide coatings.

Klimov, A. S.; Medovnik, A. V. [Tomsk State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Tyunkov, A. V. [Tomsk State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Institute of High Current Electronics, Tomsk 634055 (Russian Federation); Savkin, K. P.; Shandrikov, M. V.; Vizir, A. V. [Institute of High Current Electronics, Tomsk 634055 (Russian Federation)

2013-01-15T23:59:59.000Z

252

Numerical simulation of carbon arc discharge for nanoparticle synthesis  

SciTech Connect

Arc discharge with catalyst-filled carbon anode in helium background was used for the synthesis of carbon nanoparticles. In this paper, we present the results of numerical simulation of carbon arc discharges with arc current varying from 10 A to 100 A in a background gas pressure of 68 kPa. Anode sublimation rate and current voltage characteristics are compared with experiments. Distribution of temperature and species density, which is important for the estimation of the growth of nanoparticles, is obtained. The probable location of nanoparticle growth region is identified based on the temperature range for the formation of catalyst clusters.

Kundrapu, M.; Keidar, M. [Department of Mechanical and Aerospace Engineering, George Washington University, Washington, DC 20052 (United States)

2012-07-15T23:59:59.000Z

253

Characteristics of electromagnetic interference generated during discharge of Mylar samples  

SciTech Connect

This paper discusses the measurements of the electromagnetic interference (EMI) generated during discharges of Mylar samples. The two components of EMI, the conducted emission and the radiated emission, are characterized by the replacement current and the radiated RF spectrum respectively. The measured radiated RF spectra reveal important information on the source of the electromagnetic radiation. The possible sources are the replacement current pulse and the discharged generated plasma. The scaling of the amplitudes of the EMI, as a function of the area of the test sample, is also discussed.

Leung, P.L.

1984-12-01T23:59:59.000Z

254

Electrostatic Discharge Sensitivity and Electrical Conductivity of Composite Energetic Materials  

SciTech Connect

Composite energetic material response to electrical stimuli was investigated and a correlation between electrical conductivity and ignition sensitivity was examined. The composites consisted of micrometer particle aluminum combined with another metal, metal oxide, or fluoropolymer. Of the nine tested mixtures, aluminum with copper oxide was the only mixture to ignite by electrostatic discharge with minimum ignition energy (MIE) of 25 mJ and an electrical conductivity of 1246.25 nS; two orders of magnitude higher than the next composite. This study showed a similar trend in MIE for ignition triggered by a discharged spark compared with a thermal hot wire source.

Michael A. Daniels; Daniel J. Prentice; Chelsea Weir; Michelle L. Pantoya; Gautham Ramachandran; Tim Dallas

2013-02-01T23:59:59.000Z

255

AIRPORT LIGHTING Session Highlights  

E-Print Network (OSTI)

. These sessions were designed to offer practical-yet-specialized training and information outreach for personnel information on airport lighting and navigational aid equipment selection, funding, maintenance, and operation known as AirTAP, sponsored three airport-lighting training sessions at different locations in Minnesota

Minnesota, University of

256

LED Lighting Facts  

Energy.gov (U.S. Department of Energy (DOE))

DOE's LED Lighting Facts program showcases LED products for general illumination from manufacturers who commit to testing products and reporting performance results according to industry standards. For lighting buyers, designers, and energy efficiency programs, the program provides information essential to evaluating SSL products.

257

Light intensity compressor  

DOE Patents (OSTI)

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

258

Explosively pumped laser light  

DOE Patents (OSTI)

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

259

Hall current layer formation in arc discharge across magnetic field and transfer of fast ions out of discharge  

SciTech Connect

In the work presented here the geometry of the Hall current layer in a plasma of the vacuum arc discharge in the transverse magnetic field are analyzed. The extraction of an intense pure flux of fast ions generated in the cathode spots with the help of the Hall layer is discussed. Experiments on the arc source of carbon fast ions are described. The anode geometry adequate to the mechanism of the arc current passage through the transverse magnetic field is found out experimentally. Up to 70% of fast ions are extracted out of the arc discharge in the arched magnetic field. In experiments, the Hall current layer formation in the vacuum arc discharge across magnetic field is confidently confirmed.

Bender, E.D.; Dimov, G.I.; Krivenko, A.S.; Razorenov, V.V. [Lumiks PTI Ltd., Yarne 81223 (Israel); Budker Institute of Nuclear Physics, Novosibirsk 630090 (Russian Federation)

2006-01-15T23:59:59.000Z

260

Columbia Water and Light - HVAC and Lighting Efficiency Rebates |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Lighting: 50% of invoiced cost up to $22,500 Program Info State Missouri Program Type Utility Rebate Program Rebate Amount HVAC Replacements: $570 - $3,770 Lighting: $300/kW reduction or half of project cost Provider Columbia Water and Light Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain measures are based upon the

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Induction Lighting: An Old Lighting Technology Made New Again | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again July 27, 2009 - 5:00am Addthis John Lippert Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that frequently cause other bulbs to burn out quickly. Thus, many induction lighting units have an extremely long life of up to 100,000 hours. To put this in perspective, an induction lighting system lasting 100,000 hours will last more than 11 years in continuous 24/7 operation, and 25 years if operated 10 hours a day. The technology, however, is far from new. Nikola Tesla demonstrated induction lighting in the late 1890s around the same time that his rival,

262

Reading Municipal Light Department - Business Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reading Municipal Light Department - Business Lighting Rebate Reading Municipal Light Department - Business Lighting Rebate Program Reading Municipal Light Department - Business Lighting Rebate Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Commercial Customers: $10,000 per calendar year Municipal Customers: $15,000 per calendar year Program Info State Massachusetts Program Type Utility Rebate Program Rebate Amount T-8/T-5 Lamp with Electronic Ballasts: $11 - $35/fixture Interior High Output Lamp with Electronic Ballasts: $100/fixture De-lamping: $4 - $9/lamp Lighting Sensors: $20/sensor LED Exit Signs: $20/fixture Provider Incentive Programs

263

Categorical Exclusion Determinations: B5.1 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

26, 2010 26, 2010 CX-003526: Categorical Exclusion Determination LED (Light-Emitting Diode) Street Light Retrofit CX(s) Applied: A1, A9, B1.3, B3.6, B5.1 Date: 08/26/2010 Location(s): Lorain County, Ohio Office(s): Electricity Delivery and Energy Reliability, National Energy Technology Laboratory August 26, 2010 CX-003525: Categorical Exclusion Determination Green Buildings Retrofit CX(s) Applied: B1.4, B5.1 Date: 08/26/2010 Location(s): Hopewell, Virginia Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory August 26, 2010 CX-003524: Categorical Exclusion Determination Energy Efficient Street Lighting Changeover - Light-Emitting Diode (LED)/High Intensity Discharge (HID) CX(s) Applied: A1, A9, B1.3, B5.1 Date: 08/26/2010 Location(s): Oak Harbor, Ohio

264

Lighting fundamentals handbook: Lighting fundamentals and principles for utility personnel  

SciTech Connect

Lighting accounts for approximately 30% of overall electricity use and demand in commercial buildings. This handbook for utility personnel provides a source of basic information on lighting principles, lighting equipment, and other considerations related to lighting design. The handbook is divided into three parts. Part One, Physics of Light, has chapters on light, vision, optics, and photometry. Part Two, Lighting Equipment and Technology, focuses on lamps, luminaires, and lighting controls. Part Three, Lighting Design Decisions, deals with the manner in which lighting design decisions are made and reviews relevant methods and issues. These include the quantity and quality of light needed for visual tasks, calculation methods for verifying that lighting needs are satisfied, lighting economics and methods for evaluating investments in efficient lighting systems, and miscellaneous design issues including energy codes, power quality, photobiology, and disposal of lighting equipment. The handbook contains a discussion of the role of the utility in promoting the use of energy-efficient lighting. The handbook also includes a lighting glossary and a list of references for additional information. This convenient and comprehensive handbook is designed to enable utility lighting personnel to assist their customers in developing high-quality, energy-efficient lighting systems. The handbook is not intended to be an up-to-date reference on lighting products and equipment.

Eley, C.; Tolen, T. (Eley (Charles) Associates, San Francisco, CA (United States)); Benya, J.R. (Luminae Souter Lighting Design, San Francisco, CA (United States))

1992-12-01T23:59:59.000Z

265

Light and Bread Mold  

NLE Websites -- All DOE Office Websites (Extended Search)

Light and Bread Mold Light and Bread Mold Name: CHASE Location: N/A Country: N/A Date: N/A Question: HOW CAN I EFICTIVELY TEST THE EFFECTS OF LIGHT ON BREAD MOLD? Replies: Hello Chase, In order to test the effects of light on bread mould you need to set up an experiment. There are two things you need to have in your experiment to make it a good experiment: 1. A 'control'. 2. Replicates 1. The 'control' Obviously in order to test the effects of light on bread mold you will need to actually shine some light on some bread mold and see what happens. This is your 'treatment'. However, it is vitally important that you know what would have happened without the treatment (in this case added light). Let's pretend that you do a test a you find that the bread mold under the light actually dies. How do you know if your bread mold died because light was added or because at that time of year all bread mold would die naturally or because by adding light you caused the temperature to rise and that killed the bread mold? The answer is that you do not know unless you have taken the trouble to find out with anouther test called the 'control'. The 'control' is a piece of bread mold, identical to the 'treatment' bread mold, which is placed in identical conditions to the 'treatment' piece of bread mold except that light is removed. Your 'control' piece of bread mold will need to be (to the best of your abillity) at the same temperature, in the same area, at similar humidity, etc. Part of the skill of designing a scientific experiment is being able think of all the possible things which might be affecting the bread mold and keeping them the same in both the 'treatment' and the 'control' (except, of course, for the presence of light) so that when you find a difference between the 'treatment' and the 'control' you are sure that it is the result of the light rather than something else.

266

Generation of Superthermal Electrons in a Micropinch Discharge  

SciTech Connect

Results are presented from experimental studies of the formation of the superthermal electron component in a micropinch discharge plasma. Radiative collapse in a Z-pinch is found to affect the energy of the accelerated electrons. That the radiative collapse has been reached may be inferred from the energy of the emitted hard X-ray photons.

Dolgov, A.N. [Moscow Engineering Physics Institute, Kashirskoe sh. 31, Moscow, 115409 (Russian Federation); Vikhrev, V.V. [Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, pl. Akademika Kurchatova 1, Moscow, 123182 (Russian Federation)

2005-03-15T23:59:59.000Z

267

Discrimination between Jovian radio emissions and Saturn electrostatic discharges  

E-Print Network (OSTI)

vertical streaks in the dynamic spectrum of the Cassini/RPWS (Radio and Plasma Wave Science) receiver in the frequency range of a few MHz can be due to Jovian radio emissions or SEDs (Saturn electrostatic discharges caused by lightning in Saturn's atmosphere. We show a method for discriminating between these two

Gurnett, Donald A.

268

COLLISIONLESS ELECTRON HEATING IN RF GAS DISCHARGES: I. QUASILINEAR THEORY  

E-Print Network (OSTI)

COLLISIONLESS ELECTRON HEATING IN RF GAS DISCHARGES: I. QUASILINEAR THEORY Yu.M. Aliev1 , I an interest in mechanisms of electron heating and power deposition in the plasma main- tained by radio parameters. Due to the large value of the mean free path (MFP) the main mechanism of electron heating turns

Kaganovich, Igor

269

The Combination of Hydrogen and Oxygen by Electric Discharges  

Science Journals Connector (OSTI)

Combination of hydrogen and oxygen in the Geissler discharge, low-voltage arc and electrodeless discharge.It was noted that combination ceased to be explosive in equivalent volumes of the two gases at pressures below 3 cm. Logarithmic decrease in pressure was obtained in equivalent volumes in the Geissler discharge for constant current, whereas excess oxygen increased and excess hydrogen decreased the rate of combination, a similar change in rate having been noted by Lind in his alpha-ray experiments.Number of water molecules formed per pair of ions, as function of pressure.From a consideration of the number of ions present in the Geissler discharge it appears that the number, k, of water molecules formed per pair of ions at the lower pressures is much less than unity, but that it increases with increasing pressure and may approach the value obtained by Lind at somewhat higher pressures. The pressure at which k approximates unity is such that the time between molecular collisions is of the order of magnitude of the life of an excited hydrogen atom. This is consistent with the view that combination may be due to some similar type of excitation produced by a process secondary to ionization.

Rogers D. Rusk

1928-08-01T23:59:59.000Z

270

INTRODUCTION Weakly electric fish generate an electric organ discharge (EOD)  

E-Print Network (OSTI)

4196 INTRODUCTION Weakly electric fish generate an electric organ discharge (EOD) that results in an electric field that surrounds the fish's body. In Eigenmannia, the EOD is quasi-sinusoidal and when fish are in close proximity (~1m or less) their EODs interact. In the case of two nearby conspecifics, the combined

271

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE  

E-Print Network (OSTI)

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE DURING THE LAST DEGLACIATION Anders E the sources of sea level rise and freshwater dis- charge to the global oceans associated with retreat of ice­10 m sea level rise at 19.0­19.5 ka, sourced largely from Northern Hemisphere ice sheet retreat

Carlson, Anders

272

Radioactive Liquid Waste Treatment Facility Discharges in 2011  

SciTech Connect

This report documents radioactive discharges from the TA50 Radioactive Liquid Waste Treatment Facilities (RLWTF) during calendar 2011. During 2011, three pathways were available for the discharge of treated water to the environment: discharge as water through NPDES Outfall 051 into Mortandad Canyon, evaporation via the TA50 cooling towers, and evaporation using the newly-installed natural-gas effluent evaporator at TA50. Only one of these pathways was used; all treated water (3,352,890 liters) was fed to the effluent evaporator. The quality of treated water was established by collecting a weekly grab sample of water being fed to the effluent evaporator. Forty weekly samples were collected; each was analyzed for gross alpha, gross beta, and tritium. Weekly samples were also composited at the end of each month. These flow-weighted composite samples were then analyzed for 37 radioisotopes: nine alpha-emitting isotopes, 27 beta emitters, and tritium. These monthly analyses were used to estimate the radioactive content of treated water fed to the effluent evaporator. Table 1 summarizes this information. The concentrations and quantities of radioactivity in Table 1 are for treated water fed to the evaporator. Amounts of radioactivity discharged to the environment through the evaporator stack were likely smaller since only entrained materials would exit via the evaporator stack.

Del Signore, John C. [Los Alamos National Laboratory

2012-05-16T23:59:59.000Z

273

Treated wastewater discharged from municipal wastewater treatment plants (WWTPs) contains  

E-Print Network (OSTI)

Treated wastewater discharged from municipal wastewater treatment plants (WWTPs) contains to provide rapid, field-ready, inexpen- sive testing of these chemicals in wastewater is also needed estrogenic chemicals, and 2) develop sensor technology for the rapid measure- ment in wastewater of two key

Fay, Noah

274

Doppler effect for an optical discharge source of shock waves  

SciTech Connect

The Doppler effect for a moving pulsating optical discharge producing periodic shock waves is considered. The manifestations of the effect are limited by the wave merging mechanism. The validity conditions were found for the effect in the case of a pulsating source of shock waves. (interaction of laser radiation with matter. laser plasma)

Tishchenko, V N [Institute of Laser Physics, Siberian Branch, Russian Academy of Sciences, Novosibirsk (Russian Federation)

2005-11-30T23:59:59.000Z

275

THE POSSIBILITY OF PRODUCING THERMONUCLEAR REACTIONS IN A GASEOUS DISCHARGE*  

E-Print Network (OSTI)

THE POSSIBILITY OF PRODUCING THERMONUCLEAR REACTIONS IN A GASEOUS DISCHARGE* I.V. Kurchatov of the energy of thermonuclear reactions. Physicists the world over are attracted by the extraordinarily interest- ing and very difficult task of controlling thermonuclear reactiom. Investigations in this field

276

Relationships Between Rate and Pattern of Unitary Discharges in Medial  

E-Print Network (OSTI)

Department of Psychobiology, School of Biological Sciences, University of California, Iwine, California 92664, a relatively brief sample of the single-unit record is often the basis for characterizing the stimulus-response charac- teristics of a unit. If unit discharge char- acteristics are invariant over time, a sample record

Weinberger, Norman M.

277

Condenser for extreme-UV lithography with discharge source  

DOE Patents (OSTI)

Condenser system, for use with a ringfield camera in projection lithography, employs quasi grazing-incidence collector mirrors that are coated with a suitable reflective metal such as ruthenium to collect radiation from a discharge source to minimize the effect of contaminant accumulation on the collecting mirrors.

Sweatt, William C. (Albuquerque, NM); Kubiak, Glenn D. (Livermore, CA)

2001-01-01T23:59:59.000Z

278

Joint probability of precipitation and discharge deficits in the Netherlands  

E-Print Network (OSTI)

Joint probability of precipitation and discharge deficits in the Netherlands Jules J. Beersma and T. Adri Buishand Royal Netherlands Meteorological Institute, De Bilt, The Netherlands Received 14 April] The Netherlands are situated at the downstream end of the Rhine River. A large part of the country can be supplied

Beersma, Jules

279

Luminescence of argon in a spatially stabilized mono-filamentary dielectric barrier micro-discharge: spectroscopic and kinetic analysis  

Science Journals Connector (OSTI)

The experimental work reported here is devoted to the temporal behaviour of a mono-filamentary dielectric barrier discharge in pure argon, from 100 to 700?Torr. A sinusoidal voltage supply is used, its frequency ranging from 10 to 90?kHz. An anode avalanche followed by a cathode streamer as well as the spatial stability of the micro-discharge is clearly seen in successive 3-ns snapshots in the visible range. Near the cathode, its diameter is about 0.2?mm, at 400?Torr. The electrical characteristics of the discharge are also evaluated, in particular the breakdown voltage and the energy deposited in the micro-discharge. The light output in the vacuum ultraviolet range is essentially due to the second continuum of argon, centred at 130?nm. The kinetic study of this continuum shows that primary excitation of the lowest argon atomic 4s and 4s' states is practically achieved after 120?ns since beyond that time the luminescence decay of the second continuum is fairly described by only two exponential terms. So collisions between excited states, electronic collisions, and recombination of ionic species do not contribute significantly to this luminescence, after 120?ns. Surprisingly, we do not observe the contribution of the Ar(3P1) resonant state in the production of the argon excimers. The radiative lifetime of the Ar2[1u(3P2)]low v excimer ((3.18 0.03)?s) and the three-body rate constant relative to the decay of the Ar(3P2) metastable state ((13.2 0.9)?Torr?2?s?1) leading to the formation of Ar2[1u(3P2)], are estimated. These results are consistent with those found from the literature. A simple kinetic scheme is proposed for times later than 120?ns.

N Merbahi; N Sewraj; F Marchal; Y Salamero; P Millet

2004-01-01T23:59:59.000Z

280

Characteristics of radio-frequency, atmospheric-pressure glow discharges with air using bare metal electrodes  

SciTech Connect

In this letter, an induced gas discharge approach is proposed and described in detail for obtaining a uniform atmospheric-pressure glow discharge with air in a {gamma} mode using water-cooled, bare metal electrodes driven by radio-frequency (13.56 MHz) power supply. A preliminary study on the discharge characteristics of the air glow discharge is also presented in this study. With this induced gas discharge approach, radio-frequency, atmospheric-pressure glow discharges using bare metal electrodes with other gases which cannot be ignited directly as the plasma working gas, such as nitrogen, oxygen, etc., can also be obtained.

Wang Huabo; Sun Wenting; Li Heping; Bao Chengyu; Zhang Xiaozhang [Department of Engineering Physics, Tsinghua University, Beijing 100084 (China)

2006-10-16T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

A Theory of the Electric Discharge Through Gases  

Science Journals Connector (OSTI)

Three general differential equations are set up which determine the average behavior of a discharge of electricity through a gas. Approximate solutions, giving the electric field E and the concentration of electrons and positive ions, n1 and n2, at any distance x from the cathode, are found for several ranges of value of E.When E is large, the solution corresponds to the conditions in the cathode and anode fall spaces in a glow discharge. Equations are obtained for the potential drop V across the fall space; the current density at the electrode divided by the square of the gas pressure, jp2; and the thickness of the fall space times the pressure, pd.These equations indicate that for the cathode fall space there is a certain minimum value of V, called Vn; and for jp2, called jnp2; and a corresponding maximum value of pd, pdn, beyond which values the discharge ceases. These stationary values are shown to be constants, dependent only on the nature of the gas used and of the cathode material, and correspond to the normal cathode fall space. The equation determining Vn is shown to be of the right from by comparison with the experimentally determined values. From these values of Vn, values of jnp2 and of pdn are calculated for four gases and four cathode materials, and the calculated values check with the experimental data. The corresponding equations for the anode fall space show why there is no corresponding normal anode fall.A consideration of the discharge when E is large throughout the distance between electrodes indicates that there is another stationary value of the cathode fall space when the current density at the cathode reaches its maximum possible value. The V in this case is much smaller than the Vn for the glow discharge, and the form of the equations indicate that they describe the conditions in an electric arc.Another approximate equation is obtained when E is constant, which is the case in the positive column of a glow discharge. This solution indicates that within certain limits of pressure and current density, small sinusoidal variations about the average value Ep, are possible in E. These correspond to the striations sometimes observed in the positive column. The equations determining Ep and those determining the distance between striations check with the known empirical laws relating these amounts to the pressure, the radius of the discharge tube and the critical potentials of the gas used. A general discussion is given of the Faraday dark space and reasons are given why it should be near the cathode rather than the anode.

Philip M. Morse

1928-06-01T23:59:59.000Z

282

Lighting Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Renovations Lighting Renovations Lighting Renovations October 16, 2013 - 4:54pm Addthis When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide focuses on the renewable energy opportunities, energy efficiency may also present amble opportunity for energy and cost savings. Renewable Energy Options for Lighting Renovations Daylighting Photovoltaics Daylighting Daylighting maximizes the use of natural light in a space to reduce the need for artificial lighting. Incorporating daylighting into a lighting strategy should occur during the planning stage of design since it affects all aspects. Ambient light dimming controls are critical in daylighting, since the

283

Lighting Group: Controls: IBECS  

NLE Websites -- All DOE Office Websites (Extended Search)

IBECS IBECS Integrated Building Environmental Communications System Objective The overall technical goal of the IBECS project is to develop an integrated building equipment communications network that will allow appropriate automation of lighting and envelope systems to increase energy efficiency, improve building performance, and enhance occupant experience in the space. This network will provide a low-cost means for occupants to control local lighting and window systems, thereby improving occupant comfort, satisfaction and performance. A related goal is to improve existing lighting control components and accelerate development of new daylighting technologies that will allow daylighting to be more extensively applied to a larger proportion of building floor space.

284

Green Light Pulse Oximeter  

DOE Patents (OSTI)

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

285

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

286

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

287

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

288

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

289

Spectrally Enhanced Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Spectrally enhanced lighting (SEL) is a cost-effective, low-risk design method for achieving significant energy savings. It entails shifting the color of lamps from the warmer to the cooler (whiter) end of the color spectrum, more closely matching daylight. Studies show that, with this color shift, occupants perceive lighting to be brighter and they are able to see more clearly. Since SEL provides the same levels of visual acuity with fewer lumens of output, SEL installations can be designed using fewer lamps or lower wattage lamps than traditional lighting.

290

Peninsula Light Company - Commercial Efficient Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peninsula Light Company - Commercial Efficient Lighting Rebate Peninsula Light Company - Commercial Efficient Lighting Rebate Program Peninsula Light Company - Commercial Efficient Lighting Rebate Program < Back Eligibility Commercial Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount General: 30% - 70% of cost Provider Peninsula Light Company Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service. Customers who upgrade to highly efficient fixtures and systems are eligible to receive a rebate generally covering 30% - 70% of the project cost. These retrofits improve light quality and reduce energy costs in participating facilities. PLC

291

Lots of Light Literature  

NLE Websites -- All DOE Office Websites (Extended Search)

Lots of Light Literature Lots of Light Literature The Teacher Resource Center contains a great variety of resources for all areas of science K-12. For the concepts of light here is a sampling of some of these resources. Science is Elementary - Spring 1995, vol. 6, no. 4. Science is Elementary is produced by the Museum Institute for Teaching Science, 79 Milk Street, Suite 210, Boston, MA 02109-3903. Science is Elementary is a newsletter we have admired for years. The topic of this issue deals with Color and Light. It contains content information to the teacher, trade secrets or teaching tips, "Book Looking" section and the section call "Sciencing" which includes a variety of activities. Science is Elementary is published quarterly. Subscription cost is: $22.00/year.

292

Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-U.S. Senator Jeff Bingaman, Chair, Senate Committee on Energy and Natural Resources 2013-2025 * The Future of LED General Lighting 2013-2025 * The Promise of OLED General...

293

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

294

Comparing Light Bulbs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Comparing Light Bulbs Grades: K-4, 5-8 Topic: Energy Efficiency and Conservation Owner: U.S. Environmental Protection Agency This educational material is brought to you by the U.S....

295

Sandia National Laboratories: (Lighting and) Solid-State Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

on the third and upcoming revolution (illumination). Topics cover the basics of light-emitting diode (LED) operation; a 200-year history of lighting technology; the importance of...

296

Lighting Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Lighting Design July 29, 2012 - 6:28pm Addthis Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. How does it work? Buy ENERGY STAR-rated lighting for the highest quality, energy-efficient lighting. Use timers and other controls to turn lights on and off. Use outdoor solar lighting. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're constructing a new house, consider lighting as part of your whole-house design -- an

297

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting LED Lighting July 29, 2012 - 4:43pm Addthis LED Lighting What are the key facts? Quality LED products can last 25 times longer than an incandescent bulb and use 75% less energy. LEDs are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting technologies. Quality LED light bulbs last longer, are more durable, and offer comparable or better light quality than other types of lighting. Check out the top 8 things about LEDs to learn more. Energy Savings LED is a highly energy efficient lighting technology, and has the potential to fundamentally change the future of lighting in the United States. Residential LEDs -- especially ENERGY STAR rated products -- use at least

298

Light and Energy -Daylight measurements  

E-Print Network (OSTI)

Light and Energy - Daylight measurements #12;Light and Energy - Daylight measurements Authors: Jens;3 Title Light and Energy Subtitle Daylight measurements Authors Jens Christoffersen, Ásta Logadóttir ............................................................................... 7 Measurement results: Kyosemi.................................................................. 9

299

Energy Conservation in Industrial Lighting  

E-Print Network (OSTI)

In order to reduce energy use in lighting Union Carbide recently issued drastically reduced new lighting level standards. A computerized lighting cost program was also developed. Using this program a number of additional energy saving techniques...

Meharg, E.

1979-01-01T23:59:59.000Z

300

Microdischarge-assisted ignition of dielectric-barrier high-pressure glow discharges  

E-Print Network (OSTI)

in the ignition of high-pressure arc lamps8 and volume dc discharges.6 Here, we employ a hybrid discharge source of uniform, nonequilibrium glow plasmas for a variety of applications at pressures of 100

Raja, Laxminarayan L.

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Plasma Polymerization in an Atmospheric Pressure Dielectric Barrier Discharge in a Flowing Gas  

Science Journals Connector (OSTI)

The plasma of atmospheric pressure dielectric barrier discharges (DBD) has ... ozone generation by Siemens 1857. Non-thermal atmospheric pressure discharges are of considerable interest because...1, 2.... The DBD...

Rdiger Foest; Martin Schmidt; Jrgen F. Behnke

2004-01-01T23:59:59.000Z

302

Carbon nanostructures production by AC arc discharge plasma process at atmospheric pressure  

Science Journals Connector (OSTI)

Carbon nanostructures have received much attention for a wide range of applications. In this paper, we produced carbon nanostructures by decomposition of benzene using AC arc discharge plasma process at atmospheric pressure. Discharge was carried out ...

Shenqiang Zhao; Ruoyu Hong; Zhi Luo; Haifeng Lu; Biao Yan

2011-01-01T23:59:59.000Z

303

Boundary Layer Flow Control With a One Atmosphere Uniform Glow Discharge Surface Plasma  

Science Journals Connector (OSTI)

Low speed wind tunnel data have been acquired for planar panels covered by a uniform, glow-discharge surface plasma in atmospheric pressure air known as the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP). Streamwise and spanwise arrays of flush, ...

Roth J. Reece; Sherman Daniel M.; Wilkinson Stephen P.

1998-01-01T23:59:59.000Z

304

Obtaining Carbon Nanoparticles with the Use of Electric?Arc Discharge between Coaxial Electrodes  

Science Journals Connector (OSTI)

The structure of a setup and the results of experiments on obtaining carbon nanostructures with the use of a d.c. arc discharge between coaxial graphite electrodes have been presented. The discharge was stabil...

V. V. Chuprasov; M. S. Tret'yak

305

Sliding electric arc discharge as a means of aircraft trajectory control  

Science Journals Connector (OSTI)

The dynamics of sliding electric arc discharge and the formation of shock waves in the stages of leader motion and the electric arc development in a supersonic air flow behind ... (bar). The air flow in the discharge

V. S. Aksenov; V. V. Golub; S. A. Gubin; V. P. Efremov

2004-10-01T23:59:59.000Z

306

Experimental investigation of the sliding electric frequency mode arc discharge in the subsonic and supersonic flow  

Science Journals Connector (OSTI)

The plasma of the discharge, initiated along a surface of wing or the fuselage, is promising aircraft control facility. Strong shock wave formation at air gap disruption by the sliding discharge (SD) changes a...

V.S. Aksenov; S.A. Gubin; K.V. Efremov; V.V. Golub

2009-01-01T23:59:59.000Z

307

Growth Conditions of Double-Walled Carbon Nanotubes in Arc Discharge  

Science Journals Connector (OSTI)

Growth Conditions of Double-Walled Carbon Nanotubes in Arc Discharge ... Preparation conditions for large-scale synthesis of double-walled carbon nanotubes (DWCNTs) by using electric arc discharge were examined. ...

Yahachi Saito; Takanori Nakahira; Sashiro Uemura

2003-01-04T23:59:59.000Z

308

Numerical investigation on operation mode influenced by external frequency in atmospheric pressure barrier discharge  

SciTech Connect

The influence of external driving frequency on the discharge mode in the dielectric barrier discharge was investigated with a two-dimensional, self-consistent fluid model. The simulation results show that the helium discharge exhibits three operation modes: Townsend, homogeneous glow, and local glow discharges from the lower frequency (1 kHz) to the higher frequency (100 kHz) under discharge parameters specified in this work. The discharge operates in a Townsend mode when the driving frequency varies from 1 to about 7 kHz; while it exhibits homogenous glow characteristics in an approximate range from 7 to 65 kHz; when the external frequency exceeds 65 kHz, it turns into a local glow discharge. The effects of external driving frequency on the discharge mode were revealed and the physical reasons were discussed.

Wang Qi [Dalian Institute of Semiconductor Technology, School of Electronics Science and Technology, Dalian University of Technology, Dalian 116023 (China); Sun Jizhong; Wang Dezhen [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116023 (China)

2011-10-15T23:59:59.000Z

309

Patterns of the electric organ discharge during courtship and spawning in the mormyrid fish, Pollimyrus isidori  

Science Journals Connector (OSTI)

Pollimyrus isidori's electric organ discharge (EOD) is of the pulse type. Patterns of EOD intervals were investigated prior to, during and...n=15) showed characteristic discharge interval pattern...

B. O. Bratton; B. Kramer

1989-06-01T23:59:59.000Z

310

Electron Energy Analysis of Vacuum Discharge in High-Voltage Accelerator Tube  

Science Journals Connector (OSTI)

......measurement of the electron energy spectrum during discharge adds some new knowledge to the total voltage...authors sincerely thank Electron Energy Analysis of Vacuum Discharge...Physics, Academic Press, New York, Vol. 6, p. 297. 25......

Akio TAKAOKA; Katsumi URA; Kiyokazu YOSHIDA

1982-01-01T23:59:59.000Z

311

Measurement and Processing of Fast Pulsed Discharge Current in Plasma Focus Machines  

Science Journals Connector (OSTI)

The fast pulsed electric discharge current drives all physical processes in the plasma focus device; in turn all physical processes in the focus affect the current waveform. Thus the discharge ... current wavefor...

S. Lee; S. H. Saw; R. S. Rawat; P. Lee; R. Verma

2012-04-01T23:59:59.000Z

312

Light diffusing fiber optic chamber  

DOE Patents (OSTI)

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

313

Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Angeles, CA to someone Los Angeles, CA to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Facebook Tweet about Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Twitter Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Google Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Delicious Rank Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Digg Find More places to share Solid-State Lighting: Municipal Consortium

314

Ozone production by nanoporous dielectric barrier glow discharge in atmospheric pressure air  

SciTech Connect

This study is aimed at demonstrating plasma-chemical ozone production based on low temperature atmospheric pressure glow discharge through nanoporous dielectric barriers. The 20 kHz ac driven discharge is formed in air or oxygen gas flowing in the axial direction of the cylindrical plasma reactor containing four parallel aluminum rods covered with nanoporous alumina films. The discharge utilizing nanoporous dielectric barrier is more uniform and more energy efficient in ozone generation than the discharge through smooth-surface dielectric barriers.

Cho, J. H.; Koo, I. G.; Choi, M. Y.; Lee, W. M. [Department of Chemistry and Division of Energy Systems Research, Ajou University, Suwon 443-749 (Korea, Republic of)

2008-03-10T23:59:59.000Z

315

Author's personal copy Ionic and neuromodulatory regulation of burst discharge controls frequency tuning  

E-Print Network (OSTI)

discharge (EOD), in order to sense its environment (Fig. 1A). Changes in the expected pattern of the EOD

Chacron, Maurice

316

E-Print Network 3.0 - air vents discharge Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1519 6.2. Compressed air energy storage... and discharge rates for many cycles. Indeed, the high cycling...

317

Limiting discharge voltage of a capacitive energy store in a subway car  

Science Journals Connector (OSTI)

A method is proposed for calculating the limiting discharge voltage of a capacitive energy store in a subway car.

G. G. Ryabtsev; I. A. Ermakov

2012-12-01T23:59:59.000Z

318

Better Medicine Through Proper Lighting  

Science Journals Connector (OSTI)

Adverse lighting conditions can seriously hinder medical diagnoses. Through the use of properly filtered light, medical professionals may dramatically improve viewing conditions for...

Czajkowski, Amber

319

Transition from Townsend to glow discharge: Subcritical, mixed, or supercritical characteristics Danijela D. Sijacic1  

E-Print Network (OSTI)

Transition from Townsend to glow discharge: Subcritical, mixed, or supercritical characteristics, the transition from Townsend to glow discharge can show the textbook subcritical behavior, but for smaller values long discharges that have a clearly pronounced subcritical characteristics, i.e., for fixed large pd

Ebert, Ute

320

Using sensitivity derivatives for design and parameter estimation in an atmospheric plasma discharge simulation  

Science Journals Connector (OSTI)

The problem of applying sensitivity analysis to a one-dimensional atmospheric radio frequency plasma discharge simulation is considered. A fluid simulation is used to model an atmospheric pressure radio frequency helium discharge with a small nitrogen ... Keywords: Adjoint, Direct differentiation, Optimization, Plasma discharge, Sensitivity analysis, Uncertainty analysis

Kyle J. Lange; W. Kyle Anderson

2010-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A DC corona discharge on a flat plate to induce air Pierre MAGNIER1  

E-Print Network (OSTI)

with applied voltage. Moreover, with voltage higher than a threshold value, the electric discharge changes. For this purpose, different electric discharges have recently been developed, such as the "One Atmosphere Uniform to an arc regime. Figure 1: DC surface corona discharge actuator on a flat plate. 2.2. Optical Setup

Paris-Sud XI, Université de

322

POSITIVE ION CURRENTS IN THE POSITIVE COLUMN OF THE GLOW-DISCHARGE IN THE NOBLE GASES  

Science Journals Connector (OSTI)

...thin glass tubes. The discharge tube, diameter 6 cm...potentials. In the mercury arc the positive ion part...the case in the neon discharge. Similar curves were...and the body of the discharge, looking much like...efficiency for the photo- electric effect than has ever...

W. Uyterhoeven

1929-01-01T23:59:59.000Z

323

The Mormyromast Region of the Mormyrid Electrosensory Lobe. I. Responses to Corollary Discharge and Electrosensory Stimuli  

E-Print Network (OSTI)

of the electric organ discharge (EOD) by two different inputs, EOD-evoked reafferent input from electroreceptors and corollary discharge input associated with the motor command that elicits the EOD. This first paper examines associated with the motor command that drives the electric organ discharge (EOD). The goal is to understand

Roberts, Patrick D.

324

Three-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining  

E-Print Network (OSTI)

construction by means of electrical discharge machining (EDM). First, flat- top corrugated carbon fiber. In this paper, we used electrical discharge machining (EDM)--previously used to transform corrugated metallicThree-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining J

Vaziri, Ashkan

325

Two-Dimensional Numerical Modeling of Radio-Frequency Ion Engine Discharge  

E-Print Network (OSTI)

Two-Dimensional Numerical Modeling of Radio-Frequency Ion Engine Discharge Michael Meng-Tsuan Tsay-Frequency Ion Engine Discharge Michael Meng-Tsuan Tsay, Manuel Martinez-Sanchez August 2010 SSL # 14 Modeling of Radio-Frequency Ion Engine Discharge by Michael Meng-Tsuan Tsay Submitted to the Department

326

ArcSafe® with Pulsed Arrested Spark Discharge  

NLE Websites -- All DOE Office Websites (Extended Search)

ArcSafe® ArcSafe® with Pulsed Arrested Spark Discharge  2007 R&D 100 Award Entry Form ArcSafe® with Pulsed Arrested Spark Discharge  Joint Submitters Submitting Organization Sandia National Laboratories PO Box 5800, MS 1181 Albuquerque, NM 87185-1181 USA Larry Schneider Phone: (505) 845-7135 Fax: (505) 845-7685 Email: lxschne@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate represen- tation of this product. (Signature)______________________________________ Astronics-Advanced Electronic Systems, Inc. 9845 Willows Rd NE City: Redmond State: WA Zip/Postal: 98052-2540 USA Contact Name: Michael Ballas, Program Manager Phone: (425) 895-4304 Fax: (425)702.4930 Email: michael.ballas@astronics.com

327

Zero Discharge Water Management for Horizontal Shale Gas Well Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Discharge Water Management for Discharge Water Management for Horizontal Shale Gas Well Development Final Report Start Date: October 1, 2009 End Date: March 31, 2012 Authors: Paul Ziemkiewicz, PhD Jennifer Hause Raymond Lovett, PhD David Locke Harry Johnson Doug Patchen, PG Report Date Issued: June 2012 DOE Award #: DE-FE0001466 Submitting Organization: West Virginia Water Research Institute West Virginia University PO Box 6064 Morgantown, WV 26506-6064 FilterSure, Inc. PO Box 1277 McLean, VA 22101 ShipShaper, LLP PO Box 2 Morgantown, WV 26507 2 | P a g e Acknowledgment "This material is based upon work supported by the Department of Energy under Award Number DE-FE0001466." Disclaimer "This report was prepared as an account of work sponsored by an agency of the United States

328

Electrical Characterization of an RF Glow Discharge at Room Pressure  

SciTech Connect

A non-thermal atmospheric-like plasma source able to operate at room temperature represents, by its physical nature, a considerable potential for biological applications, given its highly accurate action and extremely controllable penetration on the surface of biological tissue. As we start up a research line into this technology, we report the electrical characterization of a room pressure plasma discharge by means of a coupling network model. The discharge is produced by a 13.56MHz commercial generator. As it is impossible to measure directly its state variables (voltage and current intensity) due to the considerable perturbation created by introducing a low impedance at the system output, then an indirect estimation of such variables is achieved from experimental diagnostics at the input, so to validate the proposed electrical model.

Perez-Martinez, J. A.; Piedad-Beneitez, A. de la [Instituto Tecnologico de Toluca, AP 890, Toluca (Mexico); Pena-Eguiluz, R.; Mercado-Cabrera, A.; Valencia A, R.; Barocio, S. R. [Instituto Nacional de Investigaciones Nucleares, AP 18-1027, 11801, Mexico D.F. (Mexico); Lopez-Callejas, R.; Godoy-Cabrera, O. G.; Benitez-Read, J. S.; Pacheco-Sotelo, J. O. [Instituto Tecnologico de Toluca, AP 890, Toluca (Mexico); Instituto Nacional de Investigaciones Nucleares, AP 18-1027, 11801, Mexico D.F. (Mexico)

2006-12-04T23:59:59.000Z

329

Redox reactions with empirical potentials: Atomistic battery discharge simulations  

E-Print Network (OSTI)

Batteries are pivotal components in overcoming some of today's greatest technological challenges. Yet to date there is no self-consistent atomistic description of a complete battery. We take first steps toward modeling of a battery as a whole microscopically. Our focus lies on phenomena occurring at the electrode-electrolyte interface which are not easily studied with other methods. We use the redox split-charge equilibration (redoxSQE) method that assigns a discrete ionization state to each atom. Along with exchanging partial charges across bonds, atoms can swap integer charges. With redoxSQE we study the discharge behavior of a nano-battery, and demonstrate that this reproduces the generic properties of a macroscopic battery qualitatively. Examples are the dependence of the battery's capacity on temperature and discharge rate, as well as performance degradation upon recharge.

Dapp, Wolf B

2013-01-01T23:59:59.000Z

330

Characteristics Of A Dielectric Barrier Discharge In Atmospheric Air  

SciTech Connect

Parallel plate dielectric barrier discharges consisting of two electrodes with glass (epsilon{sub r} = 7.5) and alumina (epsilon{sub r} = 9.0) as the dielectric barrier were constructed. The system is powered by a variable 20 kV high voltage supply which is capable of delivering unipolar voltage pulses at frequency of 0.1-2.5 kHz and sinusoidal voltages at 6.5 kHz and above. At atmospheric pressure, the discharges exhibit either diffuse or filamentary appearance depending on parameters which include the series capacitance established by the electrodes with the dielectric barrier and varying air gap, dielectric material, and frequency of the supply voltages. This DBD system is built for the study of bacterial sterilization.

Lai, C. K.; Chin, O. H. [Plasma Research Laboratory, Physics Department, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Thong, K. L. [Microbiology Division, Institute of Biological Sciences, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia)

2009-07-07T23:59:59.000Z

331

Intrinsic Noise Induced Coherence Resonance in a Glow discharge Plasma  

E-Print Network (OSTI)

Experimental evidence of intrinsic noise induced coherence resonance in a glow discharge plasma is being reported. Initially the system is started at a discharge voltage (DV) where it exhibited fixed point dynamics, and then with the subsequent increase in the DV spikes were excited which were few in number and with further increase of DV the number of spikes as well as their regularity increased. The regularity in the interspike interval of the spikes is estimated using normalized variance (NV). Coherence resonance was determined using normalized variance curve and also corroborated by Hurst exponent and power spectrum plots. We show that the regularity of the excitable spikes in the floating potential fluctuation increases with the increase in the DV, upto a particular value of DV. Using a Wiener filter, we separated the noise component which was observed to increase with DV and hence conjectured that noise can be playing an important role in the generation of the coherence resonance. From an anharmonic osc...

Shaw, Pankaj Kumar; Ghosh, S; Janaki, M S; Iyengar, A N S

2014-01-01T23:59:59.000Z

332

Focused shock spark discharge drill using multiple electrodes  

DOE Patents (OSTI)

A spark discharge focused drill provided with one pulse forming line or a number of pulse forming lines. The pulse forming line is connected to an array of electrodes which would form a spark array. One of the electrodes of each of the array is connected to the high voltage side of the pulse forming line and the other electrodes are at ground potential. When discharged in a liquid, these electrodes produce intense focused shock waves that can pulverize or fracture rock. By delaying the firing of each group of electrodes, the drill can be steered within the earth. Power can be fed to the pulse forming line either downhole or from the surface area. A high voltage source, such as a Marx generator, is suitable for pulse charging the lines.

Moeny, William M. (Albuquerque, NM); Small, James G. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

333

Equilibrium analysis of tokamak discharges with toroidal variation  

SciTech Connect

Tokamaks provide a field structure that is almost axisymmetric around the torus axis. There are however always small toroidal variations due to the limited number of toroidal field coils, the magnetic field ripple. On the other hand, non-axisymmetric external fields are applied on purpose to ergodise the field structure close to the separatrix, to control the heat and particle transport across the plasma boundary. We present a perturbation method to calculate the magnetic field of tokamak discharges with with weak toroidal variation. The method is applied for the equilibrium reconstruction of Tore Supra discharges with toroidal ripple. The perturbation method does not rely on a flux surface representation and can therefore be applied to structures with magnetic islands. We obtain the plasma response to the field of ergodising external coils, as proposed for the ITER device.

Zwingmann, W.; Becoulet, M.; Moreau, Ph.; Nardon, E. [Ass Euratom-CEA/DSM/DRFC Cadarache, 13108 St.-Paul-Lez-Durance (France)

2006-11-30T23:59:59.000Z

334

Method and apparatus for processing exhaust gas with corona discharge  

DOE Patents (OSTI)

The present invention is placing a catalyst coating upon surfaces surrounding a volume containing corona discharge. In addition, the electrodes are coated with a robust dielectric material. Further, the electrodes are arranged so that at least a surface portion of each electrode extends into a flow path of the exhaust gas to be treated and there is only exhaust gas in the volume between each pair of electrodes. 12 figs.

Barlow, S.E.; Orlando, T.M.; Tonkyn, R.G.

1999-06-22T23:59:59.000Z

335

Negative ion source with hollow cathode discharge plasma  

DOE Patents (OSTI)

A negative ion source of the type where negative ions are formed by bombarding a low-work-function surface with positive ions and neutral particles from a plasma, wherein a highly ionized plasma is injected into an anode space containing the low-work-function surface. The plasma is formed by hollow cathode discharge and injected into the anode space along the magnetic field lines. Preferably, the negative ion source is of the magnetron type.

Hershcovitch, Ady (Mt. Sinai, NY); Prelec, Krsto (Setauket, NY)

1983-01-01T23:59:59.000Z

336

Sn Plasma Focus Discharge for EUV Radiation Source  

Science Journals Connector (OSTI)

A small plasma focus device was constructed for the EUV radiation experiment. The storage energy of capacitor bank is 3.4 kj and the maximum discharge current is 140 kA. Although the device was not well optimized for strong pinch EUV radiation was observed from the focus plasma. The plasma dynamics was affected by electrode material and the use of Sn electrode was proved to be effective for producing Sn plasma.

Keiichi Takasugi; Takeshi Umeda; Ena Kiuchi; Takuya Hayashi

2006-01-01T23:59:59.000Z

337

Negative ion source with hollow cathode discharge plasma  

DOE Patents (OSTI)

A negative ion source of the type where negative ions are formed by bombarding a low-work-function surface with positive ions and neutral particles from a plasma, wherein a highly ionized plasma is injected into an anode space containing the low-work-function surface is described. The plasma is formed by hollow cathode discharge and injected into the anode space along the magnetic field lines. Preferably, the negative ion source is of the magnetron type.

Hershcovitch, A.; Prelec, K.

1980-12-12T23:59:59.000Z

338

Solar lighting | Open Energy Information  

Open Energy Info (EERE)

lighting lighting Jump to: navigation, search Introductory Facts About Solar Lights It is not just a normal light bulb.The solar light consists of a LED or Light Emitting Diode, which draw little power. Coupled with constantly recharging batteries, you will never run out of light! They will save the customer money. By Replacing all outdoor lighting with solar lights there is no need to plug in to the electrical system. The lights will automatically turn on at dusk and will be charged during the day. They help out the environment.Not only does not plugging in to the power system save money but also energy, therefore protecting the Earth. Easy to Install No wires necessary, just pop in the battery. They come in all designs Just because they are solar lights doesn't

339

ECE 466: LED Lighting Systems -Incandescent lightings rise and  

E-Print Network (OSTI)

versus cost - Power Electronic Drives for CFL and LED light sources to achieve dimmable operation - Basic electric AC and DC circuits at Sophomore level or equivalents Absolutes Lighting System Requirements index as a metric of a light source - Power Electronic Energy sources driving light sources in a compact

Schumacher, Russ

340

A diffusion-controlled regime of cylindrical inductive discharges  

Science Journals Connector (OSTI)

A fluid-plasma model of diffusion-controlled cylindrical inductive discharges in an argon gas is presented. The plasma-field structure of the discharge obtained is completed by the interrelated behaviour of concentrations of charged particles, electron temperature, power absorbed on average by an electron, radial distribution of the components of the high-frequency field, of the Joule heating and of the high-frequency current density in the plasma. The self-consistency of the model and its validity over a wide pressure range (p = (0.055)?Torr) is reached by involving detailed treatment of the electron energy balance, of the nonlinear processes in the charged particle balance and of the momentum equations. By accounting for the velocity dependence of the elastic electronneutral collision frequency, concepts from the kinetic plasma theory are introduced in a fluid-plasma description of the discharge. The analysis of the results is in terms of changing gas pressure, power and frequency of the maintenance field. The changes of the parameters of the external coil due to the plasma loading in the coil are also discussed.

St Kolev; H Schlter; A Shivarova; Kh Tarnev

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Ignition and extinction phenomena in helium micro hollow cathode discharges  

SciTech Connect

Micro hollow cathode discharges (MHCD) were produced using 250??m thick dielectric layer of alumina sandwiched between two nickel electrodes of 8??m thickness. A through cavity at the center of the chip was formed by laser drilling technique. MHCD with a diameter of few hundreds of micrometers allowed us to generate direct current discharges in helium at up to atmospheric pressure. A slowly varying ramped voltage generator was used to study the ignition and the extinction periods of the microdischarges. The analysis was performed by using electrical characterisation of the V-I behaviour and the measurement of He*({sup 3}S{sub 1}) metastable atoms density by tunable diode laser spectroscopy. At the ignition of the microdischarges, 2??s long current peak as high as 24?mA was observed, sometimes followed by low amplitude damped oscillations. At helium pressure above 400?Torr, an oscillatory behaviour of the discharge current was observed just before the extinction of the microdischarges. The same type of instability in the extinction period at high pressure also appeared on the density of He*({sup 3}S{sub 1}) metastable atoms, but delayed by a few ?s relative to the current oscillations. Metastable atoms thus cannot be at the origin of the generation of the observed instabilities.

Kulsreshath, M. K.; Schwaederle, L.; Dufour, T.; Lefaucheux, P.; Dussart, R. [GREMI, CNRS/Universit d'Orlans (UMR7344), Orlans (France); Sadeghi, N. [LIPhy, CNRS and Universite Joseph Fourier (UMR5588), Grenoble (France); Overzet, L. J. [GREMI, CNRS/Universit d'Orlans (UMR7344), Orlans (France); PSAL, UTDallas, Richardson, Texas 75080-3021 (United States)

2013-12-28T23:59:59.000Z

342

Sandia National Laboratories: White Light Creation Architectures  

NLE Websites -- All DOE Office Websites (Extended Search)

TechnologiesWhite Light Creation Architectures White Light Creation Architectures Overview of SSL White Light Creation Architectures The entire spectral range of visible light can...

343

Types of Lighting in Commercial Buildings - Table L1  

U.S. Energy Information Administration (EIA) Indexed Site

L1. Floorspace Lit by Lighting Type for Non-Mall Buildings, 1995 L1. Floorspace Lit by Lighting Type for Non-Mall Buildings, 1995 Floorspace (million square feet) Total (Lit or Unlit) in All Buildings Total (Lit or Unlit) in Buildings With Any Lighting Lighted Area Only Area Lit by Each Type of Light Incan- descent Standard Fluor-escent Compact Fluor- escent High Intensity Discharge Halogen All Buildings*........................ 54,068 51,570 45,773 6,746 34,910 1,161 3,725 779 Building Floorspace (Square Feet) 1,001 to 5,000....................... 6,272 5,718 4,824 986 3,767 50 22 54 5,001 to 10,000.................... 7,299 6,667 5,728 1,240 4,341 61 169 45 10,001 to 25,000.................. 10,829 10,350 8,544 1,495 6,442 154 553 Q 25,001 to 50,000.................. 7,170 7,022 6,401 789 5,103 151 485 86

344

Types of Lighting in Commercial Buildings - Table L3  

U.S. Energy Information Administration (EIA) Indexed Site

L3. Floorspace Lit by Lighting Type (Non-Mall Buildings), 2003 L3. Floorspace Lit by Lighting Type (Non-Mall Buildings), 2003 Floorspace (million square feet) Total (Lit or Unlit) in All Buildings Total (Lit or Unlit) in Buildings With Any Lighting Lighted Area Only Area Lit by Each Type of Light Incan- descent Standard Fluor-escent Compact Fluor- escent High Intensity Discharge Halogen All Buildings*............................. 64,783 62,060 51,342 5,556 37,918 4,004 4,950 2,403 Building Floorspace (Square Feet) 1,001 to 5,000............................. 6,789 6,038 4,826 678 3,932 206 76 124 5,001 to 10,000........................... 6,585 6,090 4,974 739 3,829 192 238 248 10,001 to 25,000........................ 11,535 11,229 8,618 1,197 6,525 454 506 289 25,001 to 50,000........................ 8,668 8,297 6,544 763 4,971 527 454 240

345

Types of Lighting in Commercial Buildings - Table L2  

U.S. Energy Information Administration (EIA) Indexed Site

L2. Floorspace Lit by Lighting Types (Non-Mall Buildings), 1999 L2. Floorspace Lit by Lighting Types (Non-Mall Buildings), 1999 Floorspace (million square feet) Total (Lit or Unlit) in All Buildings Total (Lit or Unlit) in Buildings With Any Lighting Lighted Area Only Area Lit by Each Type of Light Incan- descent Standard Fluor-escent Compact Fluor- escent High Intensity Discharge Halogen All Buildings* ............................. 61,707 58,693 49,779 6,496 37,150 3,058 5,343 1,913 Building Floorspace (Square Feet) 1,001 to 5,000 ............................ 6,750 5,836 4,878 757 3,838 231 109 162 5,001 to 10,000 .......................... 7,940 7,166 5,369 1,044 4,073 288 160 109 10,001 to 25,000 ....................... 10,534 9,773 7,783 1,312 5,712 358 633 232 25,001 to 50,000 ....................... 8,709 8,452 6,978 953 5,090 380 771 281

346

Wisconsin Business Sheds Light on Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting April 29, 2010 - 4:59pm Addthis When this photograph was taken, the upper floors of Wisconsin’s Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC When this photograph was taken, the upper floors of Wisconsin's Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC Joshua DeLung Wisconsin-based Energy Performance Specialists LLC is helping clients reduce energy consumption in a very simple way-by just using less.

347

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Assessment Environmental Assessment Proposed Upgrade and Improvement of the National Synchrotron Light Source Complex at Brookhaven National Laboratory, Upton, New York This Environmental Assessment addresses the proposed action by the U.S. Department of Energy to upgrade the facilities of the National Synchrotron Light Source Complex, namely the National Synchrotron Light Source (NSLS), the Accelerator Test Facility and the Source Development Laboratory. The environmental effects of a No-Action Alternative as well as a Proposed Action are evaluated in the Environmental Assessment. The “NSLS Environmental Assessment Fact Sheet” link below leads to a one-page summary of the Environmental Assessment. The “NSLS Environmental Assessment” link below leads to the whole 41-page

348

Lighting Technology Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Panel Technology Panel Federal Utility Partnership Working Group N b 2009 November 1 1 8, 2009 Doug Avery Southern California Edison Southern California Edison National Energy Conservation M d t Mandates * There are Federal and State Mandates to reduce energy consumption - California Investor Owned Electric Utilities are ordered to save around 3 Billion kWh's each y year from 2007-2113 - Federal buildings ordered to reduce electrical Federal buildings ordered to reduce electrical energy consumption 35% by 2012 Energy Consump ption gy Lighting accounts for 42 7% of energy consumption Lighting accounts for 42.7% of energy consumption Data Courtesy of SDG&E Data Courtesy of SDG&E Energy Consump ption gy More than ¾ of the lighting load is non-residential. Data Courtesy of SDG&E

349

Light harvesting arrays  

DOE Patents (OSTI)

A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

Lindsey, Jonathan S. (Raleigh, NC)

2002-01-01T23:59:59.000Z

350

Locations Everyone: Lights, Camera, Action!  

Science Journals Connector (OSTI)

Locations Everyone: Lights, Camera, Action! ... Harvard Institute of Proteomics Harvard Medical School ...

Robert F. Murphy; Joshua LaBaer

2008-12-05T23:59:59.000Z

351

Extreme Ultraviolet Light Chris Cosio  

E-Print Network (OSTI)

Prospectus Extreme Ultraviolet Light Chris Cosio #12;The field of extreme ultraviolet light (XUV to the way XUV interacts with object, XUV properties are difficult to observe. Extreme ultraviolet light is absorbed by all objects it comes in contact with. Furthermore, extreme ultraviolet light also has low

Hart, Gus

352

Nonlinear theory of slow light  

Science Journals Connector (OSTI)

...describes a signal moving with the speed of light on a constant background (fast...profile, propagates with the speed of light, reaches the slow-light soliton...field and propagating with the speed of light has reached the soliton. In figure-6...

2011-01-01T23:59:59.000Z

353

,,,"Incandescent","Standard Fluorescent","Compact Fluorescent","High-Intensity Discharge","Halogen"  

U.S. Energy Information Administration (EIA) Indexed Site

B39. Lighting Equipment, Floorspace, 1999" B39. Lighting Equipment, Floorspace, 1999" ,"Total Floorspace (million square feet)" ,"All Buildings","All Lit Buildings","Lighting Equipment (more than one may apply)" ,,,"Incandescent","Standard Fluorescent","Compact Fluorescent","High-Intensity Discharge","Halogen" "All Buildings ................",67338,64321,38156,60344,20666,19223,17926 "Building Floorspace" "(Square Feet)" "1,001 to 5,000 ...............",6774,5859,2946,5154,738,245,600 "5,001 to 10,000 ..............",8238,7464,4047,6722,1108,663,991 "10,001 to 25,000 .............",11153,10393,6055,9815,1759,1701,1996 "25,001 to 50,000 .............",9311,9053,5004,8344,2296,2224,1611

354

Another Side of Light - D  

NLE Websites -- All DOE Office Websites (Extended Search)

D. Three quantum phenomena D. Three quantum phenomena In fluorescence, matter absorbs light waves of a high frequency and then emits light of the same or lower frequency. This process was studied and named by George Gabriel Stokes in the mid-19th century. Today, fluorescence is familiar to us from fluorescent light bulbs. A fluorescent bulb's filament produces ultraviolet light, which is absorbed by the bulb's inner coating, which then emits lower-frequency visible light-more visible light than an incandescent bulb produces with the same wattage. According to the hypothesis of light quanta, during fluorescence an atom absorbs a quantum of light whose energy is proportional to the light wave's frequency. If the atom doesn't supply any extra energy of its own, the light quantum emitted should either have the same energy or less energy

355

Tips: Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Tips: Lighting May 4, 2012 - 3:16pm Addthis Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. What does this mean for me? Replacing 15 inefficient incandescent bulbs in your home with energy-saving bulbs could save you about $50 per year. For the greatest savings, replace your old incandescent bulbs with ENERGY STAR-qualified bulbs. An average household dedicates about 10% of its energy budget to lighting. Switching to energy-efficient lighting is one of the fastest ways to cut your energy bills. Timers and motion sensors save you even more money by reducing the amount of time lights are on but not being used.

356

GRR/Section 14-UT-b - Utah Pollutant Discharge Elimination System | Open  

Open Energy Info (EERE)

GRR/Section 14-UT-b - Utah Pollutant Discharge Elimination System GRR/Section 14-UT-b - Utah Pollutant Discharge Elimination System < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-UT-b - Utah Pollutant Discharge Elimination System 14UTBUtahPollutantDischargeEliminationSystemPermit.pdf Click to View Fullscreen Contact Agencies Utah Division of Water Quality Utah Department of Environmental Quality United States Environmental Protection Agency Regulations & Policies R317-2-3 Antidegradation Policy R317-8 Utah Pollutant Discharge Elimination System (UPDES) Triggers None specified Click "Edit With Form" above to add content 14UTBUtahPollutantDischargeEliminationSystemPermit.pdf 14UTBUtahPollutantDischargeEliminationSystemPermit.pdf Error creating thumbnail: Page number not in range.

357

ORNL DAAC GLOBAL RIVER DISCHARGE, 1807-1991, V. 1.1 (RIVDIS)  

NLE Websites -- All DOE Office Websites (Extended Search)

Data > Regional/Global > River Discharge (RIVDIS) > Guide Data > Regional/Global > River Discharge (RIVDIS) > Guide Document GLOBAL RIVER DISCHARGE, 1807-1991, V. 1.1 (RIVDIS) Get Data Global River Discharge, 1807-1991, V. 1.1 (RivDIS) Summary: The Global Monthly River Discharge Data Set contains monthly averaged discharge measurements for 1018 stations located throughout the world. The period of record varies widely from station to station with a mean of 21.5 years. The data are derived from the published UNESCO archives for river discharge and checked against information obtained from the Global Runoff Center in Koblenz, Germany, through the U.S. National Geophysical Data Center in Boulder, Colorado. Citation: Cite this data set as follows (citation revised on September 20, 2002): Vorosmarty, C. J., B. M. Fekete, and B. A. Tucker. 1998. Global River

358

Stabilization of liquid hydrocarbon fuel combustion by using a programmable microwave discharge in a subsonic airflow  

SciTech Connect

Under conditions of a programmable discharge (a surface microwave discharge combined with a dc discharge), plasma-enhanced combustion of alcohol injected into a subsonic (M = 0.3-0.9) airflow in the drop (spray) phase is stabilized. It is shown that the appearance of the discharge, its current-voltage characteristic, the emission spectrum, the total emission intensity, the heat flux, the electron density, the hydroxyl emission intensity, and the time dependences of the discharge current and especially discharge voltage change substantially during the transition from the airflow discharge to stabilized combustion of the liquid hydrocarbon fuel. After combustion stabilization, more than 80% of liquid alcohol can burn out, depending on the input power, and the flame temperature reaches {approx}2000 K.

Kopyl, P. V.; Surkont, O. S.; Shibkov, V. M.; Shibkova, L. V. [Moscow State University, Faculty of Physics (Russian Federation)

2012-06-15T23:59:59.000Z

359

Tokyo Street Lights  

E-Print Network (OSTI)

that you have only 17, no 16, no 15 seconds left to get to the other side before the light changes and the impatient American drivers put the pedal to the metal and it's road kill time. Talk about stress! In Tokyo, crossing the street is a leisurely...

Hacker, Randi; Tsutsui, William

2008-03-12T23:59:59.000Z

360

Radioluminescent polymer lights  

SciTech Connect

The preparation of radioluminescent light sources where the tritium is located on the aryl-ring in a polymer has been demonstrated with deuterium/tritium substitution. This report discusses tests, results, and future applications of radioluminescent polymers. 10 refs. (FI)

Jensen, G.A.; Nelson, D.A.; Molton, P.M.

1990-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Environmental Preferences LIGHT: Sunny.  

E-Print Network (OSTI)

Environmental Preferences LIGHT: Sunny. SOIL: Well-drained, deep sandy loam. FERTILITY: Medium beans BeansDiane Relf, Extension Specialist, Horticulture, Virginia Tech Alan McDaniel, Extension Specialist, Horticulture, Virginia Tech are yellow and waxy in appearance, their flavor is only subtly

Liskiewicz, Maciej

362

Studies in Light Production  

Science Journals Connector (OSTI)

... interested in that subject. The collection consists of ten chapters which have appeared in The Electrician, together with two others. It may at once be said that the contents are ... contents are not only extremely interesting, but will also serve as a useful and important handbook for lighting engineers. ...

1912-12-26T23:59:59.000Z

363

www.mnltap.umn.edu The trusted resource for Minnesota's local transportation agencies Spring 2009 Vol. 17, No. 2 MCEA, CEAM, NCITE, APWA..............2  

E-Print Network (OSTI)

Vol. 17, No. 2 AWARDS MCEA, CEAM, NCITE, APWA..............2 LRRB UPDATE Street sweeping, storm water...........3 Complete streets..................................3 Best-value contracting.......................3 RESEARCH HID lights, induction heating system, salt skirt.................................................8

Minnesota, University of

364

Embodied Energy and Off-Grid Lighting  

E-Print Network (OSTI)

solar and wind energy systems. 7 If anticipated improvements in LED lighting system performance (Lighting Africa,

Alstone, Peter

2012-01-01T23:59:59.000Z

365

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

366

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

367

Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fluorescent Lighting Fluorescent Lighting Fluorescent Lighting October 17, 2013 - 5:44pm Addthis Fluorescent Lighting Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent products to provide a similar amount of light. They also last about 10 times longer (7,000-24,000 hours). The two general types of fluorescent lamps are: Compact fluorescent lamps (CFLs) -- commonly found with integral ballasts and screw bases, these are popular lamps often used in household fixtures Fluorescent tube and circline lamps -- typically used for task lighting such as garages and under cabinet fixtures, and for lighting large areas in commercial buildings. CFLs CFLs combine the energy efficiency of fluorescent lighting with the convenience and popularity of incandescent fixtures. CFLs fit most fixtures

368

COMMENTS ON THE SEARCH FOR ELECTROSTATIC DISCHARGES ON MARS  

SciTech Connect

Ruf et al. used the Deep Space Network (DSN) to search for the emission of non-thermal radiation by martian dust storms, theoretically predicted by Renno et al. They detected the emission of non-thermal radiation that they were searching for, but were surprised that it contained spectral peaks suggesting modulation at various frequencies and their harmonics. Ruf et al. hypothesized that the emission of non-thermal radiation was caused by electric discharges in a deep convective dust storm, modulated by Schumann resonances (SRs). Anderson et al. used the Allen Telescope Array (ATA) to search for similar emissions. They stated that they found only radio frequency interference (RFI) during their search for non-thermal emission by martian dust storms and implicitly suggested that the signal detected by Ruf et al. was also RFI. However, their search was not conducted during the dust storm season when deep convective storms are most likely to occur. Here, we show that the ubiquitous dust devils and small-scale dust storms that were instead likely present during their observations are too shallow to excite SRs and produce the signals detected by Ruf et al. We also show that the spectral and temporal behavior of the signals detected by Anderson et al. corroborates the idea that they originated from man-made pulse-modulated telecommunication signals rather than martian electric discharges. In contrast, an identical presentation of the signals detected by Ruf et al. demonstrates that they do not resemble man-made signals. The presentation indicates that the DSN signals were consistent with modulation by martian SRs, as originally hypothesized by Ruf et al. We propose that a more comprehensive search for electrostatic discharges be conducted with either the ATA or DSN during a future martian dust storm season to test the hypothesis proposed by Ruf et al.

Renno, Nilton O.; Ruf, Christopher S., E-mail: renno@alum.mit.edu [Atmospheric, Oceanic and Space Sciences, University of Michigan, Ann Arbor, MI (United States)

2012-12-20T23:59:59.000Z

369

Ethanol reforming in non-equilibrium plasma of glow discharge  

E-Print Network (OSTI)

The results of a detailed kinetic study of the main plasma chemical processes in non-equilibrium ethanol/argon plasma are presented. It is shown that at the beginning of the discharge the molecular hydrogen is mainly generated in the reaction of ethanol H-abstraction. Later hydrogen is formed from active H, CH2OH and CH3CHOH and formaldehyde. Comparison with experimental data has shown that the used kinetic mechanism predicts well the concentrations of main species at the reactor outlet.

Levko, D

2012-01-01T23:59:59.000Z

370

High-Density Discharges in the Alcator Tokamak  

Science Journals Connector (OSTI)

Peak plasma densities in excess of 1015 cm-3 have been obtained in the Alcator tokamak with 60<~BT<85 kG. The highest average density so far achieved is ne=61014 cm-3; the corresponding n0?E=21013 cm-3 s. These ultrahigh-density discharges exhibit (i) nearly complete energy equilibration between electrons and ions, (ii) severe attenuation of energetic-neutral-particle fluxes, (iii) a minor role of impurities, and (iv) energy-confinement properties consistent with neoclassical estimates.

M. Gaudreau; A. Gondhalekar; M. H. Hughes; D. Overskei; D. S. Pappas; R. R. Parker; S. M. Wolfe; E. Apgar; H. I. Helava; I. H. Hutchinson; E. S. Marmar; K. Molvig

1977-11-14T23:59:59.000Z

371

Flow shaping using three-dimensional microscale gas discharge  

SciTech Connect

We introduce a flow shaping mechanism using surface compliant microscale gas discharge. A three-dimensional finite element-based multiscale ionized gas flow code is utilized to analyze charge separation, potential distribution, and flow inducement mechanism. For the case of quiescent flow, a horseshoe-shaped plasma generator is introduced. Due to its unusual shape, the three-dimensional electric force excites a pinching effect on the fluid inside selectively powered electrode arc. Such effect is capable of tripping the flow-ejecting fluid normal to the plane of the actuator and thus can be very useful for many applications.

Wang, C.-C.; Roy, Subrata [Department of Mechanical and Aerospace Engineering, Computational Plasma Dynamics Laboratory and Test Facility, University of Florida, Gainesville, Florida 32611-6300 (United States)

2009-08-24T23:59:59.000Z

372

Plasma sterilization using glow discharge at atmospheric pressure  

Science Journals Connector (OSTI)

Recent development of atmospheric pressure glow discharge was compared with the performance of an apparatus used in the first APG experiment, in terms of sterilization of newly classified biological indicator: Bacillus atrophaeus, former Bacillus subtilis var. niger and Geobacillus stearothermophilus. Stabilization was attained by controlling the experimental conditions, at low frequency: 100 kHz and Radio Frequency: 13.56 MHz, water vapor/He dilution. Large volume of meta-stable atomic helium is responsible for the result that aids generation of hydroxyl radicals.

Tetsuya Akitsu; Hiroshi Ohkawa; Masao Tsuji; Hideo Kimura; Masuhiro Kogoma

2005-01-01T23:59:59.000Z

373

Surface charge in dielectric barrier discharge plasma actuators  

SciTech Connect

Direct measurements of the dielectric surface potential and its dynamics in asymmetric dielectric barrier discharge (DBD) plasma actuators show that the charge builds up at the dielectric surface and extends far downstream of the plasma. The surface charge persists for a long time (tens of minutes) after the driving voltage has been turned off. For a sinusoidal voltage waveform, the dielectric surface charges positively. With the voltage waveform consisting of nanosecond pulses superimposed on a dc bias, the sign of the dielectric surface charge is the same as the sign (polarity) of the bias voltage. The surface charging significantly affects DBD plasma actuator performance.

Opaits, D. F.; Shneider, M. N.; Miles, Richard B. [Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Likhanskii, A. V. [Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Macheret, S. O. [Lockheed Martin Aeronautics Company, Palmdale, California 93599 (United States)

2008-07-15T23:59:59.000Z

374

Synthesizing aluminum particles towards controlling electrostatic discharge ignition sensitivity  

SciTech Connect

Aluminum particles were synthesized with shell thicknesses ranging from 2.7 to 8.3 nm and a constant diameter of 95 nm. These fuel particles were combined with molybdenum trioxide particles and the electrostatic discharge (ESD) sensitivity of the mixture was measured. Results show ignition delay increased as the alumina shell thickness increased. These results correlated with electrical resistivity measurements of the mixture which increased with alumina concentration. A model was developed using COMSOL for ignition of a single Al particle. The ignition delay in the model was consistent with the experimental results suggesting that the primary ESD ignition mechanism is joule heating.

Eric S. Collins; Jeffery P. Gesner; Michelle L. Pantoya; Michael A. Daniels

2014-02-01T23:59:59.000Z

375

DINA simulations of TCV electron cyclotron heating discharges  

Science Journals Connector (OSTI)

This paper reports on full tokamak discharge simulations in the TCV tokamak using the DINA code, of which a new open modular architecture version is presented. These new simulations include the effect of intense electron cyclotron heating, dissipated off-axis. The change in the plasma conductivity produces a time-varying plasma current profile, which in turn causes the plasma shape to relax in the almost constant vacuum quadrupole field. These simulations allow us to check on the diffusion of poloidal magnetic flux, as well as the modelling of the electron cyclotron heating.

V.E. Lukash; D. Raju; V.N. Dokouka; J.-Y. Favez; R.R. Khayrutdinov; J.B. Lister

2003-01-01T23:59:59.000Z

376

Experimental investigation of a capacitive blind hollow cathode discharge with central gas injection  

Science Journals Connector (OSTI)

The operating parameters and resulting plasma properties of a blind hollow cathode (BHC) discharge have been investigated. The hollow cathode was driven capacitively with a pulsed dc signal of 200kHz in a power range between 50 and 100W at an ambient pressure of about 10Pa. The working gas was argon, which was introduced with a ceramic capillary at different positions of the longitudinal axis of the hollow cathode with flow rates of between 30 and 1000sccm. The currentvoltage characteristics were recorded.The pressure at the end of the BHC was measured with a miniaturized pressure transducer with varying volumetric flow rate and axial position of the capillary in the hollow cathode. To characterize the ignition behaviour of the system, the measured breakdown voltages were compared with phenomenological Paschen curves calculated from the pressure data.Optical emission spectroscopy was used to examine the origins of the light emission, comparing the glow mode and hollow cathode mode in particular.A high-speed camera recorded some plasma processes. A mounting with an indium tin oxide coated glass was used to observe the inner volume of the BHC along the longitudinal axis, while the plasma was operated with different parameters. The optical observations revealed an inhomogeneous plasma condition along the axis.

D Hoffmann; M Mller; D Petkow; G Herdrich; S Lein

2014-01-01T23:59:59.000Z

377

Light with nonzero chemical potential  

Science Journals Connector (OSTI)

Thermodynamic states and processes involving light are discussed in which the chemical potential of light is nonzero. Light with nonzero chemical potential is produced in photochemical reactions for example in a light emitting diode. The chemical potential of black-body radiation becomes negative upon a Joule expansion. The isothermal diffusion of light which is a common phenomenon is driven by the gradient in the chemical potential. These and other examples support the idea that light can be interpreted as a gas of photons with properties similar to a material gas.

F. Herrmann; P. Wrfel

2005-01-01T23:59:59.000Z

378

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR® Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

379

Types of Lighting in Commercial Buildings - Lighting Characteristics  

Annual Energy Outlook 2012 (EIA)

of Lighting Types Efficacy Efficacy is the amount of light produced per unit of energy consumed, expressed in lumens per watt (lmW). Lamps with a higher efficacy value are...

380

Lighting Designer Roundtable on Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Roundtable meeting in Chicago of a group of lighting designers focused on examining solid-state lighting (SSL) market and technology issues and encouraging a discussion of designers experiences, ideas, and recommendations regarding SSL & SSL industry.

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR® Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

382

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Report 2001 Report 2001 National Synchrotron Light Source For the period October 1, 2000 through September 30, 2001 Introduction Science Highlights Year in Review Operations Publications Abstracts Nancye Wright & Lydia Rogers The National Synchrotron Light Source Department is supported by the Office of Basic Energy Sciences United States Department of Energy Washington, D.C. Brookhaven National Laboratory Brookhaven Science Associates, Inc. Upton, New York 11973 Under Contract No. DE-AC02-98CH10886 Mary Anne Corwin Steven N. Ehrlich & Lisa M. Miller Managing Editor Science Editors Production Assistants Cover images (clockwise from top left) 1. from Science Highlight by K.R. Rajashankar, M.R. Chance, S.K. Burley, J. Jiang, S.C. Almo, A. Bresnick, T. Dodatko, R. Huang, G. He,

383

Fusion pumped light source  

DOE Patents (OSTI)

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

Pappas, Daniel S. (Los Alamos, NM)

1989-01-01T23:59:59.000Z

384

OLEDS FOR GENERAL LIGHTING  

SciTech Connect

The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescence source and with an efficacy comparable to that of an incandescent source. it was recognized that achieving this would require significant advances in three area: (1) the improvement of white light quality for illumination, (2) the improvement of OLED energy efficiency at high brightness, and (3) the development of cost-effective large area fabrication techniques. The program was organized such that, each year, a ''deliverable'' device would be fabricated which demonstrated progress in one or more of the three critical research areas. In the first year (2001), effort concentrated on developing an OLED capable of generating high illumination-quality white light. Ultimately, a down-conversion method where a blue OLED was coupled with various down-conversion layers was chosen. Various color and scattering models were developed to aid in material development and device optimization. The first year utilized this approach to deliver a 1 inch x 1 inch OLED with higher illumination-quality than available fluorescent sources. A picture of this device is shown and performance metrics are listed. To their knowledge, this was the first demonstration of true illumination-quality light from an OLED. During the second year, effort concentrated on developing a scalable approach to large area devices. A novel device architecture consisting of dividing the device area into smaller elements that are monolithically connected in series was developed. In the course of this development, it was realized that, in addition to being scalable, this approach made the device tolerant to the most common OLED defect--electrical shorts. This architecture enabled the fabrication of a 6 inch x 6 inch OLED deliverable for 2002. A picture of this deliverable is shown and the performance metrics are listed. At the time, this was the highest efficiency, highest lumen output illumination-quality OLED in existence. The third year effort concentrated on improving the fabrication yield of the 6 inch x 6 inch devices and improving the underlying blue device efficiency. An efficiency breakthrough was achieved through the invention of a new device structure such that now 15 lumen per watt devices could be fabricated. A 2 feet x 2 feet OLED panel consisting of sixteen 6 inch x 6 inch high efficiency devices tiled together was then fabricated. Pictures of this panel are shown with performance metrics listed. This panel met all project objectives and was the final deliverable for the project. It is now the highest efficiency, highest lumen output, illumination-quality OLED in existence.

Anil Duggal; Don Foust; Chris Heller; Bill Nealon; Larry Turner; Joe Shiang; Nick Baynes; Tim Butler; Nalin Patel

2004-02-29T23:59:59.000Z

385

First Light SOFIA Instruments  

E-Print Network (OSTI)

The Stratospheric Observatory For Infrared Astronomy SOFIA will become operational with the next two years. It will be the biggest astronomical airborne observatory ever build, comprising a 3m-class telescope onboard a Boeing 747SP. A suite of first-light instruments is under development striving for cutting edge technology to make SOFIA a milestone in infrared astronomy. Here we present an overview over the instrumentation and an update on the current status.

Alfred Krabbe; Sean C. Casey

2002-07-19T23:59:59.000Z

386

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

High Intensity Discharge Lamps Test Procedures High Intensity Discharge Lamps Test Procedures Sign up for e-mail updates on regulations for this and other products High-intensity discharge (HID) lamps include mercury vapor (MV), metal halide (MH), and high-pressure sodium (HPS) lamps. The Department of Energy (DOE) is establishing test procedures for HID lamps. This rulemaking is mandated by the Energy Policy and Conservation Act (EPCA). ( 42 U.S.C. 6291-6309) This Rulemaking is related to the High-Intensity Discharge Lamps Standard and Test Procedure. Recent Updates | Public Meeting Information | Submitting Public Comments | Milestones and Documents | Related Rulemakings | Statutory Authority | Contact Information Recent Updates DOE published a notice of proposed rulemaking regarding test procedures for HID lamps. 76 FR 77914 (Dec. 15, 2011).

387

Solid-state lighting : lamp targets and implications for the semiconductor chip.  

SciTech Connect

A quiet revolution is underway. Over the next 5-10 years inorganic-semiconductor-based solid-state lighting technology is expected to outperform first incandescent, and then fluorescent and high-intensity-discharge, lighting. Along the way, many decision points and technical challenges will be faced. To help understand these challenges, the U.S. Department of Energy, the Optoelectronics Industry Development Association and the National Electrical Manufacturers Association recently updated the U.S. Solid-State Lighting Roadmap. In the first half of this paper, we present an overview of the high-level targets of the inorganic-semiconductor part of that update. In the second half of this paper, we discuss some implications of those high-level targets on the GaN-based semiconductor chips that will be the 'engine' for solid-state lighting.

Tsao, Jeffrey Yeenien

2003-08-01T23:59:59.000Z

388

Solid-State Lighting: Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Contacts Printable Version Share this resource Send a link to Solid-State Lighting: Contacts to someone by E-mail Share Solid-State Lighting: Contacts on Facebook Tweet about Solid-State Lighting: Contacts on Twitter Bookmark Solid-State Lighting: Contacts on Google Bookmark Solid-State Lighting: Contacts on Delicious Rank Solid-State Lighting: Contacts on Digg Find More places to share Solid-State Lighting: Contacts on AddThis.com... Contacts Web site and program contacts are provided below. Website Contact Send us your comments, report problems, and/or ask questions about information on this site. Program Contacts Contact information for the Solid-State Lighting Program. Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content Last Updated: 02/14

389

Solid-State Lighting: Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications to someone by Publications to someone by E-mail Share Solid-State Lighting: Publications on Facebook Tweet about Solid-State Lighting: Publications on Twitter Bookmark Solid-State Lighting: Publications on Google Bookmark Solid-State Lighting: Publications on Delicious Rank Solid-State Lighting: Publications on Digg Find More places to share Solid-State Lighting: Publications on AddThis.com... Conferences & Meetings Presentations Publications Postings Articles Program Fact Sheets Technology Fact Sheets CALiPER Reports GATEWAY Reports LED Lighting Facts Reports Project Reports Studies and Reports Technology Roadmaps Product Performance Guides Webcasts Videos Tools Publications The Solid-State Lighting (SSL) program produces a comprehensive portfolio of publications, ranging from overviews of the program's research

390

Plastics That Play on Light  

Science Journals Connector (OSTI)

...instrument. In most materials, the "strings" respond with the same note, only...reduced when light sets the electrons oscillating. The loss ofaromatic stability sets...double bonds, light sets electrons oscillating between electron-attract-ing (right...

David Bradley

1993-09-03T23:59:59.000Z

391

CX-000183: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

83: Categorical Exclusion Determination 83: Categorical Exclusion Determination CX-000183: Categorical Exclusion Determination Illinois County McHenry CX(s) Applied: A9, A11, B5.1 Date: 11/11/2009 Location(s): McHenry County, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office Energy Efficiency and Conservation Block Grant for: Daylighting, Occupancy Sensors, Administration Building - LED (light-emitting diode) Parking Lot Lighting, Annex A - Replace Hot Water Boiler, Annex A - Window Film, Department of Transportation Building - Skylights, Department of Transporation Building - HID (high intensity discharge) to T8 Fluorescent with Occupancy Sensors, Department of Transportation Building - Solar Wall, Government Center - LED Jail Cell Fixtures, Government Center - Parking Lot

392

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 8070 of 28,905 results. 61 - 8070 of 28,905 results. Download CX-003685: Categorical Exclusion Determination Photo Reactor for Growing Algae from Municipal Waste Water for Carbon Dioxide Capture CX(s) Applied: A1, B3.6 Date: 09/01/2010 Location(s): Allentown, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-003685-categorical-exclusion-determination Download CX-003524: Categorical Exclusion Determination Energy Efficient Street Lighting Changeover - Light-Emitting Diode (LED)/High Intensity Discharge (HID) CX(s) Applied: A1, A9, B1.3, B5.1 Date: 08/26/2010 Location(s): Oak Harbor, Ohio Office(s): Electricity Delivery and Energy Reliability, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-003524-categorical-exclusion-determination

393

GRR/Elements/14-CA-b.6 - Does RWQCB decide to allow discharge | Open Energy  

Open Energy Info (EERE)

RWQCB decide to allow discharge RWQCB decide to allow discharge < GRR‎ | Elements Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections 14-CA-b.6 - Does RWQCB decide to allow discharge Once the RWQCB and EPA deem the application complete, the RWQCB makes an initial determination whether the application is appropriate for consideration or if it should be denied outright. If the discharge is denied outright, the process ends. If RWQCB decides to consider the application, the public process is triggered. Logic Chain No Parents \V/ GRR/Elements/14-CA-b.6 - Does RWQCB decide to allow discharge (this page) \V/ No Dependents Under Development Add.png Add an Element Retrieved from "http://en.openei.org/w/index.php?title=GRR/Elements/14-CA-b.6_-_Does_RWQCB_decide_to_allow_discharge&oldid=482583

394

GRR/Section 14-NV-e - Groundwater Discharge Permit | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-NV-e - Groundwater Discharge Permit GRR/Section 14-NV-e - Groundwater Discharge Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-NV-e - Groundwater Discharge Permit 14NVEGroundwaterDischargePermit.pdf Click to View Fullscreen Contact Agencies Nevada Division of Environmental Protection Regulations & Policies NAC 445A NRS 445A Triggers None specified Click "Edit With Form" above to add content 14NVEGroundwaterDischargePermit.pdf 14NVEGroundwaterDischargePermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The Nevada Division of Environmental Protection (NDEP) Bureau of Water Pollution Control is responsible for protecting Nevada water quality from

395

A large gap of radio frequency dielectric barrier atmospheric pressure glow discharge  

SciTech Connect

A large gap was acquired between electrodes (up to 5.5 mm) of Ar atmospheric pressure glow discharge in radio frequency dielectric barrier discharge (rf-DBD). The discharge of Ar plasma was characterized by I-V curve and Lissajous plot, and the effective power of the discharge was calculated based on the measured Lissajous plot and found to be higher than 90% of the input power. To gain a thorough understanding of the mechanism, the rf-DBD with a single dielectric barrier layer operating in gamma mode glow discharge of N{sub 2} plasma was diagnosed in spatial resolution through optical emission spectroscopy. It was concluded that secondary electron emission might be responsible for the sustainable glow discharge in the large gap rf-DBD plasma.

Li, B.; Chen, Q.; Liu, Z. W. [Laboratory of Plasma Physics and Materials, Beijing Institute of Graphic Communication, Beijing 102600 (China)

2010-01-25T23:59:59.000Z

396

Production of atmospheric-pressure glow discharge in nitrogen using needle-array electrode  

SciTech Connect

An atmospheric pressure glow discharge was generated using a needle-array electrode in nitrogen, and the voltage-current characteristics of the glow discharge were obtained in a range from 1 mA to 60 A. A pulsed high voltage with short rise time under 10 ns was employed to generate streamer discharges simultaneously at all needle tips. The large number of streamer discharges prevented the glow-to-arc transition caused by inhomogeneous thermalization. Semiconductor opening switch diodes were employed as an opening switch to shorten the rise time. The glow voltage was almost constant until the discharge current became 0.3 A, whereas the voltage increased with the current higher than 0.3 A. Electron density and temperature in a positive column of the glow discharge at 60 A were obtained to 1.4x10{sup 12} cm{sup -3} and 1.3 eV from calculation based on nitrogen swarm data.

Takaki, K.; Hosokawa, M.; Sasaki, T.; Mukaigawa, S.; Fujiwara, T. [Department of Electrical and Electronic Engineering, Iwate University, 4-3-5 Ueda, Morioka, Iwate 020-8551 (Japan)

2005-04-11T23:59:59.000Z

397

Zero liquid discharge industrial wastewater treatment: Case studies from 1976-1996  

SciTech Connect

As wastewater discharge regulations become more stringent, power plants, manufacturing plants and other industrial sites are looking for ways to reduce makeup water requirements and to recycle and reuse as much wastewater as possible. In some cases, environmental regulations require zero liquid discharge, meaning all wastewater must either be retained on site or reduced to solids for disposal off site. Zero liquid discharge or {open_quotes}closed-loop{close_quotes} wastewater treatment systems using evaporators and other process equipment have been well-accepted in recent years. Often overlooked is the fact that zero discharge is not just the latest fashion--many commercial zero liquid discharge systems have been in operation since the mid-70`s. This paper will give specific examples of zero liquid discharge operations from 1974 to the present, showing how evaporation equipment and processes have changed to meet the requirements of industry and environmental regulations. 5 refs., 5 figs., 3 tabs.

Bostjancic, J.; Ludlum, R. [Ionics RCC, Bellevue, WA (United States)

1996-12-31T23:59:59.000Z

398

Modeling a short dc discharge with thermionic cathode and auxiliary anode  

SciTech Connect

A short dc discharge with a thermionic cathode can be used as a current and voltage stabilizer, but is subject to current oscillation. If instead of one anode two anodes are used, the current oscillations can be reduced. We have developed a kinetic model of such a discharge with two anodes, where the primary anode has a small opening for passing a fraction of the discharge current to an auxiliary anode. The model demonstrates that the current-voltage relationship of the discharge with two anodes is characterized everywhere by positive slope, i.e., positive differential resistance. Therefore, the discharge with two anodes is expected to be stable to the spontaneous oscillation in current that is induced by negative differential resistance. As a result, such a discharge can be used in an engineering application that requires stable plasma, such as a current and voltage stabilizer.

Bogdanov, E. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); University ITMO, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Demidov, V. I. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); West Virginia University, Morgantown, West Virginia 26506 (United States); Kaganovich, I. D. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Koepke, M. E. [West Virginia University, Morgantown, West Virginia 26506 (United States)] [West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)] [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)

2013-10-15T23:59:59.000Z

399

GRR/Section 14-CO-e - Ground Water Discharge Permit | Open Energy  

Open Energy Info (EERE)

CO-e - Ground Water Discharge Permit CO-e - Ground Water Discharge Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CO-e - Ground Water Discharge Permit 14COEGroundWaterDischargePermit.pdf Click to View Fullscreen Contact Agencies Colorado Department of Public Health and Environment Regulations & Policies Colorado Water Quality Control Act 5 CCR 1002-61 Colorado Discharge Permit System 5 CCR 1002-41 Basic Standards for Ground Water 5 CCR 1002-42 Site Specific Water Quality Standards for Ground Water Triggers None specified Click "Edit With Form" above to add content 14COEGroundWaterDischargePermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

400

GRR/Section 14-CA-e - Waste Discharge Requirements | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-CA-e - Waste Discharge Requirements GRR/Section 14-CA-e - Waste Discharge Requirements < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CA-e - Waste Discharge Requirements 14CAEWasteDischargeRequirements.pdf Click to View Fullscreen Contact Agencies California Environmental Protection Agency Water Resources Control Board Regulations & Policies Title 27 CCR, Division 2 - Environmental Protection - Solid Waste SWRCB Exemptions Triggers None specified Click "Edit With Form" above to add content 14CAEWasteDischargeRequirements.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The State Water Resources Control Board (SWRCB) may require Waste discharge

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

GRR/Section 14-TX-e - Ground Water Discharge Permit | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-TX-e - Ground Water Discharge Permit GRR/Section 14-TX-e - Ground Water Discharge Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-TX-e - Ground Water Discharge Permit 14TXEGroundWaterDischargePermit (1).pdf Click to View Fullscreen Contact Agencies Railroad Commission of Texas United States Environmental Protection Agency Regulations & Policies 16 TAC 3.8 (Rule 8) Triggers None specified Click "Edit With Form" above to add content 14TXEGroundWaterDischargePermit (1).pdf 14TXEGroundWaterDischargePermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Pits are used in drilling operations to contain drilling related fluids and

402

GRR/Section 14-CO-b - Colorado Discharge Permit System (CDPS) | Open Energy  

Open Energy Info (EERE)

CO-b - Colorado Discharge Permit System (CDPS) CO-b - Colorado Discharge Permit System (CDPS) < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CO-b - Colorado Discharge Permit System (CDPS) 14COBColoradoDischargePermitSystemCDPS.pdf Click to View Fullscreen Contact Agencies Colorado Department of Public Health and Environment Regulations & Policies Colorado Water Quality Control Act 5 CCR 1002-61 5 CCR 1002-62 Triggers None specified Click "Edit With Form" above to add content 14COBColoradoDischargePermitSystemCDPS.pdf 14COBColoradoDischargePermitSystemCDPS.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The Colorado Department of Public Health and Environment (CDPHE) Water

403

Webinar: Fuel Cell Mobile Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

404

Photodetector with enhanced light absorption  

DOE Patents (OSTI)

A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

Kane, James (Lawrenceville, NJ)

1985-01-01T23:59:59.000Z

405

Arnold Schwarzenegger, LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

;#12;Prepared By: Lighting Research Center Andrew Bierman, Project Lead Troy, New York 12180 Managed ByArnold Schwarzenegger, Governor LIGHTING RESEARCH PROGRAM PROJECT 3.2 ENERGY EFFICIENT LOAD- SHEDDING LIGHTING TECHNOLOGY Prepared For: California Energy Commission Public Interest Energy Research

406

The efficiency of conversion of energy in an electric-discharge light-gas accelerator of bodies  

Science Journals Connector (OSTI)

The results are given of investigation of the processes of energy transfer in a power supply-projectile system, ... the working gas and a number of other factors on the efficiency of energy conversion. It is foun...

A. V. Budin; V. A. Kolikov; F. G. Rutberg

2008-06-01T23:59:59.000Z

407

Costbenefit analysis of retrofit of high-intensity discharge factory lighting with energy-saving alternatives  

Science Journals Connector (OSTI)

The average labor costs for an electrician and an electricians helper were taken from the 2010 MEANS Electrical Cost Data handbook. These costs were given as $49.00/h for an electrician and $31.60/h for an electrician

Daniel J. Preston; Keith A. Woodbury

2013-05-01T23:59:59.000Z

408

Enhancement of electric oxygen-iodine laser performance using a rectangular discharge and longer gain length  

E-Print Network (OSTI)

is produced by a single radio-frequency-excited electric discharge sustained in an O2­He­NO gas mixture a is produced by a single transverse capacitive 13.56 MHz rf excited electric discharge sustained in an O2­He discharge channel section has an internal flow cross section of 1.6 cm by 7.5 cm. The plasma zone filled

Carroll, David L.

409

Diameters of Single-Wall Carbon Nanotubes Depending on Helium Gas Pressure in an Arc Discharge  

Science Journals Connector (OSTI)

Diameters of Single-Wall Carbon Nanotubes Depending on Helium Gas Pressure in an Arc Discharge ... So far, relatively large quantities of SWNTs have been produced by using Y?Ni and Fe?Ni catalysts for the electric arc discharge method28-30 and by using a Co?Ni catalyst for the pulsed laser ablation method. ... The electric current of the arc discharge also affected the yield of SWNTs though its effect was not as serious as the helium pressure. ...

Yahachi Saito; Yoshihiko Tani; Atsuo Kasuya

2000-02-26T23:59:59.000Z

410

Red light, green light | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Red light, green light Red light, green light Red light, green light Posted: December 4, 2013 - 6:28pm After the National Nuclear Security Administration signaled Y-12 to begin resuming full operations after a potential furlough, Production Vice President Bill Tindal said Production had two objectives: refocus production employees on safety, security and quality, and ensure preparedness for normal operations. "It's tempting to jump right back in when you get the green light," Tindal said. "We were in an abnormal state that really shook people. Focusing on people came first." Production began with return-to-work briefings. "During the briefings, we asked employees what they were concerned about, what was causing them stress," Tindal said. "Another concept from the briefing was the theme

411

Contribution of light-by-light scattering to energy levels of light muonic atoms  

Science Journals Connector (OSTI)

The complete contribution of diagrams with the light-by-light scattering to the Lamb shift is found for muonic hydrogen, deuterium and helium ion. The results are obtained in the static-muon approximation and ...

S. G. Karshenboim; E. Yu. Korzinin; V. G. Ivanov; V. A. Shelyuto

2010-07-01T23:59:59.000Z

412

Pedestrian Friendly Outdoor Lighting  

SciTech Connect

This GATEWAY report discusses the problems of pedestrian lighting that occur with all technologies with a focus on the unique optical options and opportunities offered by LEDs through the findings from two pedestrian-focused projects, one at Stanford University in California, and one at the Chautauqua Institution in upstate New York. Incorporating user feedback this report reviews the tradeoffs that must be weighed among visual comfort, color, visibility, efficacy and other factors to stimulate discussion among specifiers, users, energy specialists, and in industry in hopes that new approaches, metrics, and standards can be developed to support pedestrian-focused communities, while reducing energy use.

Miller, Naomi J.; Koltai, Rita; McGowan, Terry

2013-12-31T23:59:59.000Z

413

Medication Adherence and Health Care Utilization among Schizophrenia Inpatients after Discharged: A Cohort Study in Taiwan.  

E-Print Network (OSTI)

??Purpose: This study investigate the relationship and factors between medication adherence and health care utilization among Schizophrenia inpatients after discharged, for reducing relapse rate, helping (more)

Lin, Pei-Yu

2015-01-01T23:59:59.000Z

414

PolymerGraphene Nanocomposites as Ultrafast-Charge and -Discharge Cathodes for Rechargeable Lithium Batteries  

Science Journals Connector (OSTI)

PolymerGraphene Nanocomposites as Ultrafast-Charge and -Discharge Cathodes for Rechargeable Lithium Batteries ... Lithium battery; cathode; polymer; graphene; nanocomposite ...

Zhiping Song; Terrence Xu; Mikhail L. Gordin; Ying-Bing Jiang; In-Tae Bae; Qiangfeng Xiao; Hui Zhan; Jun Liu; Donghai Wang

2012-03-26T23:59:59.000Z

415

Nonlocal control of electron temperature in short direct current glow discharge plasma  

SciTech Connect

To demonstrate controlling the electron temperature in nonlocal plasma, experiments have been performed on a short (without positive column) dc glow discharge with a cold cathode by applying different voltages to the conducting discharge wall. The experiments have been performed for low-pressure noble gas discharges. The applied voltage can modify trapping the energetic electrons emitted from the cathode sheath and arising from the atomic and molecular processes in the plasma within the device volume. This phenomenon results in the energetic electrons heating the slow plasma electrons, which consequently modifies the electron temperature. Furthermore, a numerical model of the discharge has demonstrated the electron temperature modification for the above case.

Demidov, V. I. [Department of Optics and Spectroscopy, St. Petersburg State University, St. Petersburg 199034 (Russian Federation); International Laboratory Nonlocal Plasma in Nanotechnology and Medicine, ITMO University, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Department of Physics and Astronomy, West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A.; Stepanova, O. M. [Department of Optics and Spectroscopy, St. Petersburg State University, St. Petersburg 199034 (Russian Federation); Kurlyandskaya, I. P. [International Laboratory Nonlocal Plasma in Nanotechnology and Medicine, ITMO University, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); St. Petersburg University of State Fire Service of EMERCOM RF, Murmansk Branch, Murmansk 183040 (Russian Federation)

2014-09-15T23:59:59.000Z

416

3D analysis of magnetization distribution magnetized by capacitor-discharge impulse magnetizer  

Science Journals Connector (OSTI)

Method for calculating the magnetization distribution magnetized by capacitor-discharge impulse magnetizer is expanded to 3D, and the calculated flux distribution is compared with measured one.

Norio Takahashi

2001-01-01T23:59:59.000Z

417

Cell treatment and surface functionalization using the atmospheric pressure glow discharge plasma torch (APGD-t).  

E-Print Network (OSTI)

??The atmospheric pressure glow discharge plasma torch (APGD-t ) was used to treat cell cultures to investigate potential reactions with biological tissue. The plasma jet (more)

Yonson, Sara.

2006-01-01T23:59:59.000Z

418

Simulation of Atmospheric Pressure Non-Thermal Plasma Discharges for Surface Decontamination Applications  

Science Journals Connector (OSTI)

Numerical simulations are conducted to characterize atmospheric pressure plasma discharges for surface decontamination applications. A self ... dimensional hybrid model is developed to simulate the atmospheric pr...

T. Farouk; B. Farouk; A. Gutsol; A. Fridman

2008-01-01T23:59:59.000Z

419

Atmospheric-pressure dielectric barrier discharge (DBD) in air : plasma characterisation for skin therapy.  

E-Print Network (OSTI)

??A pulsed atmospheric-pressure dielectric barrier discharge (DBD) device operating in air is investigated for medical applications such as for skin disinfection and promotion of wound (more)

Rajasekaran, Priyadarshini

2011-01-01T23:59:59.000Z

420

Soft Plasma Polymerization of Gas State Precursors from an Atmospheric Pressure Corona Plasma Discharge  

Science Journals Connector (OSTI)

Soft Plasma Polymerization of Gas State Precursors from an Atmospheric Pressure Corona Plasma Discharge ... Application of nonequilibrium plasmas in organic chemistry ...

P. Anthony F. Herbert; Liam ONeill; Justyna Jaroszy?ska-Woli?ska

2009-09-11T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Influence of Peroxynitrite in Gliding Arc Discharge Treatment of Alizarin Red S and Postdischarge Effects  

Science Journals Connector (OSTI)

(15-17) Some nonthermal plasma techniques, such as corona,(18, 19) dielectric barrier discharge (DBD),(20) or gliding arc discharges (GAD) belong to these AOPs: they burn at atmospheric pressure in conditions halfway from thermal and nonthermal plasmas, since electrons and heavy particles are not fully thermalized as they are in thermal plasmas. ... Technical cost evaluation takes into account the reagents used and electricity consumption. ... Kamgang Youbi, G.; Herry, J.-M.; Bellon-Fontaine, M.-N.; Brisset, J.-L.; Doubla, A.; Natali, M.Evidence of the temporal post-discharge decontamination of bacteria by gliding electric discharges: Application to Hafnia alvei Appl. ...

D. R. Merouani; F. Abdelmalek; M. R. Ghezzar; A. Semmoud; A. Addou; J. L. Brisset

2012-12-24T23:59:59.000Z

422

Electric organ discharge (EOD) and prey capture behaviour in the electric eel, Electrophorus electricus  

Science Journals Connector (OSTI)

The prey capture behaviour and the pattern of the associated electric organ discharge (EOD) were studied in the electric eel, Electrophorus electricus.

R. Bauer

423

Real time monitoring and compensation system for micro electro discharge machining.  

E-Print Network (OSTI)

??The rapid growth in demand for micro parts has urged todays manufacturing industry to establish a reliable technique for micromachining. Micro Electrical Discharge Machining (EDM), (more)

Aligiri, Erwin.

2011-01-01T23:59:59.000Z

424

An analysis of the electro discharge machining process through remote monitoring .  

E-Print Network (OSTI)

??The Electro Discharge Machining (EDM) process is a machining process that is widespread, and a constant search for further optimisation thereof exists. Additionally, the need (more)

Vermaak, Jan Hendrik

2012-01-01T23:59:59.000Z

425

Investigation of Dry and Near-Dry Electrical Discharge Milling Processes.  

E-Print Network (OSTI)

??The dry and near-dry electrical discharge machining (EDM) processes are investigated in this research. Dry EDM uses gas to replace the liquid dielectric fluid in (more)

Tao, Jia

2008-01-01T23:59:59.000Z

426

Period doubling cascade in glow discharges: Local versus global differential conductivity  

Science Journals Connector (OSTI)

Short planar glow discharges coupled to a resistive layer exhibit a wealth of spontaneous spatiotemporal patterns. Due to similarities with other pattern forming systems that are described by reaction-diffusion models, several authors have tried to derive such models from discharge physics. We investigate the temporal oscillations of the discharge system and find a cascade of period doubling events. This shows that the inner structure of the discharge is more complex than can be described by a two-component reaction-diffusion-model with negative differential conductivity. We also derive an alternative reduced model.

Danijela D. ija?i?, Ute Ebert, and Ismail Rafatov

2004-11-23T23:59:59.000Z

427

Comparison of measurement methods for partial discharge measurement in power cables:.  

E-Print Network (OSTI)

??Nowadays there are many partial discharge (PD) measurement systems on the market. There are systems that measure according to the IEC60270 standard (conventional measurement) and (more)

Van Veen, L.W.

2014-01-01T23:59:59.000Z

428

Active electron energy distribution function control in direct current discharge using an auxiliary electrode  

SciTech Connect

The electron energy distribution functions are studied in the low voltage dc discharge with a constriction, which is a diaphragm with an opening. The dc discharge glows in helium and is sustained by the electron current emitted from a heated cathode. We performed kinetic simulations of dc discharge characteristics and electron energy distribution functions for different gas pressures (0.8 Torr-4 Torr) and discharge current of 0.1 A. The results of these simulations indicate the ability to control the shape of the electron energy distribution functions by variation of the diaphragm opening radius.

Schweigert, I. V. [Institute of Theoretical and Applied Mechanics, Novosibirsk 630090 (Russian Federation) [Institute of Theoretical and Applied Mechanics, Novosibirsk 630090 (Russian Federation); George Washington University, Washington, DC 20052 (United States); Kaganovich, I. D. [Princeton Plasma Physics Laboratory, Princeton, NJ 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton, NJ 08543 (United States); Demidov, V. I. [West Virginia University, Morgantown, WV 26506 (United States) [West Virginia University, Morgantown, WV 26506 (United States); St. Petersburg State University, St. Petersburg (Russian Federation)

2013-10-15T23:59:59.000Z

429

Radiation, Matter and Energy What is light?  

E-Print Network (OSTI)

Radiation, Matter and Energy #12;What is light? #12;Light is an electromagnetic wave #12;Light the visible spectrum, blue light has higher energy than red light Within the electromagnetic spectrum, X-rays have the highest energy, followed by UV, visible light, IR, and radio Remember: Light is just one form

Shirley, Yancy

430

Micro Electro Discharge Machining of Electrically Nonconductive Ceramics  

SciTech Connect

EDM is a known process for machining of hard and brittle materials. Due to its noncontact and nearly forceless behaviour, it has been introduced into micro manufacturing and through constant development it is now an important means for producing high-precision micro geometries. One restriction of EDM is its limitation to electrically conducting materials.Today many applications, especially in the biomedical field, make use of the benefits of ceramic materials, such as high strength, very low wear and biocompatibility. Common ceramic materials such as Zirconium dioxide are, due to their hardness in the sintered state, difficult to machine with conventional cutting techniques. A demand for the introduction of EDM to these materials could so far not be satisfied because of their nonconductive nature.At the Chemnitz University of Technology and the Fraunhofer IWU, investigations in the applicability of micro-EDM for the machining of nonconductive ceramics are being conducted. Tests are undertaken using micro-EDM drilling with Tungsten carbide tool electrodes and ZrO{sub 2} ceramic workpieces. A starting layer, in literature often referred to as 'assisting electrode' is used to set up a closed electric circuit to start the EDM process. Combining carbon hydride based dielectric and a specially designed low-frequency vibration setup to excite the workpiece, the process environment can be held within parameters to allow for a constant EDM process even after the starting layer is machined. In the experiments a cylindrical 120 {mu}m diameter Tungsten carbide tool electrode and Y{sub 2}O{sub 3}- and MgO- stabilized ZrO{sub 2} worpieces are used. The current and voltage signals of the discharges within the different stages of the process (machining of the starting layer, machining of the base material, transition stage) are recorded and their characteristics compared to discharges in metallic material. Additionally, the electrode feed is monitored. The influences of the process parameters are analysed with regard to the discharge type, electrode wear and process speed.Using the found parameters, micro geometries can be successfully machined into nonconductive Y{sub 2}O{sub 3}- and MgO- stabilized ZrO{sub 2} ceramic by means of micro-EDM.

Schubert, A. [Chair Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of Technology, 09107 Chemnitz (Germany); Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz (Germany); Zeidler, H.; Hackert, M. [Chair Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of Technology, 09107 Chemnitz (Germany); Wolf, N. [Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz (Germany)

2011-05-04T23:59:59.000Z

431

Lighting Group: Controls and Communications  

NLE Websites -- All DOE Office Websites (Extended Search)

Communications Communications Controls and Communications The Controls and Communications research activity investigates how digital technologies, such as Bluetooth, can be applied to building lighting control systems to increase building efficiency and improve occupant comfort and productivity. Projects range from embedded device networks applied to building lighting systems, to WiFi and environmental sensing and monitoring. light switch Current Projects IBECS (Integrated Building Environmental Communications System) Wireless Lighting Controls (with DUST Networks) HPCBS Advanced Digital Controls Building Control Systems Integration Completed Projects CEC Public Interest Energy Research (PIER) Projects 450 Golden Gate Project New Publications Standardizing Communication Between Lighting Devices: A Role for

432

Commercial Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Commercial Lighting At an estimated cost of $38 billion a year, lighting represents the largest source of electricity consumption in U.S. commercial buildings. By combining an inexpensive camera with a high-speed microprocessor and algorithms, researchers at the National Renewable Energy Lab developed an occupancy sensor can recognize the presence of human occupants more than 90 percent of the time -- an advancement that could lead to enormous energy savings in commercial buildings. At an estimated cost of $38 billion a year, lighting represents the largest source of electricity consumption in U.S. commercial buildings. By combining an inexpensive camera with a high-speed microprocessor and

433

Cornell University Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Lighting Quality Electric Lighting Quality The CUSD lighting design team utilized energy efficient products that meshed well with our daylighting scheme. We chose to use fluorescent tubes or compact fluorescent bulbs with an energy consumption of between 15 and 30 Watts throughout the house. The ballasts for all lamps dim to a 1% light output, so the interior and exterior lights can be adjusted as the level of available daylight fluctuates. Light sensors have been placed in front of our two largest apertures, allowing us to control how much artificial light is supplied to each space. The control of our ballasts is intricate, but refined and tested to avoid dysfunctional dimming or switching. While automatic controls are included, manual user overrides are provided in case the occupant prefers

434

Solid-State Lighting: Presentations  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentations to someone by Presentations to someone by E-mail Share Solid-State Lighting: Presentations on Facebook Tweet about Solid-State Lighting: Presentations on Twitter Bookmark Solid-State Lighting: Presentations on Google Bookmark Solid-State Lighting: Presentations on Delicious Rank Solid-State Lighting: Presentations on Digg Find More places to share Solid-State Lighting: Presentations on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Presentations This page provides links to the presentations given at the DOE Solid-State Lighting Workshops, as well as links to reference materials. Some of the following documents are available as Adobe Acrobat PDFs. Download Adobe Reader. Workshop Presentations, Materials and Reports November 2013: Presentations from DOE SSL Market Introduction Workshop

435

Applications of Slow Light in Telecommunications  

Science Journals Connector (OSTI)

Exotic effects such as slow light, fast light and even stored light have been observed in the laboratory. Now, optical scientists are turning their attention toward developing...

Boyd, Robert W; Gauthier, Daniel J; Gaeta, Alexander L

2006-01-01T23:59:59.000Z

436

Advanced Lighting Systems | Open Energy Information  

Open Energy Info (EERE)

Minnesota Zip: 56378 Product: Advanced Lighting Systems (ALS) provides a number of LED and fiber optic lighting solutions. It was acquired by Nexxus Lighting in September...

437

Considerations When Comparing LED and Conventional Lighting  

Energy.gov (U.S. Department of Energy (DOE))

When comparing LED lighting performance to conventional lighting, buyers will want to consider energy efficiency, operating life and lumen depreciation, light output/distribution, color quality,...

438

Active charge/passive discharge solar heating systems: thermal analysis  

SciTech Connect

The performance of active charge/passive discharge solar space-heating systems is analyzed. This type of system combines liquid-cooled solar collector panels with a massive integral storage component that passively heats the building interior by radiation and free convection. The TRNSYS simulation program is used to evaluate system performance and to provide input for the development of a simplified analysis method. This method, which provides monthly calculations of delivered solar energy, is based on Klein's Phi-bar procedure and data from hourly TRNSYS simulations. The method can be applied to systems using a floor slab, a structural wall, or a water tank as the storage component. Important design parameters include collector area and orientation, building heat loss, collector and heat-exchanger efficiencies, storage capacity, and storage to room coupling.

Swisher, J.

1981-01-01T23:59:59.000Z

439

Glow discharge pretreatment tools for vacuum web coating  

Science Journals Connector (OSTI)

In the last few years plasma pre-treatment has been established as a powerful tool to increase the quality in vacuum web coating whereas, the effect of web pre-treatment under atmospheric conditions is declining due to several reasons, glow discharge assisted in linein vacuo pre-treatment is much more reliable. Two tools for plasma pre-treatment are presented here. Both are easily scalable as to comply with the needs of large area web coating with a typical coating width of over 2 m, and they operate in a pressure range that is compatible with sputtering and evaporation processes taking place in the same vacuum system. The effect of the glow discharge on polymeric web depends on electron temperature (typically a few electron volts), electron density (ranging typically from 10?9 to 10?11 cm?3), ion energy, and chemical composition. The mentioned electron density range is indispensable to meet the demands of satisfactory production speeds, in particular with evaporation. By means of the so-called Treatmag, an abnormal glow discharge enhanced by a closed loop tunnel shaped magnetic field is generated in the 10?2 mbar pressure range. This tool is widely used for the improvement of metallic coatings on polymeric web. The ion energies typically range well below 70 eV. Indeed, water vapor and oxygen permeation rates through OPP have been quartered respectively, third. The so-called RF hollow anode described herein next is comprising a capacitively coupled, asymmetric 13.56 \\{MHz\\} radio frequency glow discharge driven in a hollow life electrode, operated in the 10?2 mbar pressure range. The easily scaleable RF hollow anode is dedicated to the dynamic pre-treatment or coating of either dielectric or metal web (or rigid sheet), and can be used in conjunction either with sputtering or, at line speeds of typical 510 m/s, with evaporation processes. The RF hollow anode renders ion fluxes of up to 1 mA/cm2 at energies between 100 and several hundred electron volts. So far it complements the Treatmag, which yields ions with considerably lower energies. The adhesion improvement by the RF hollow anode we attribute to a pronounced increase of the cross-link density (amorphization) in the near surface region of in-plane oriented polymeric web commonly used. Ex situ XPS spectra taken 3 days after venting from PET samples treated at high web speeds are given. It is mentioned that the industrial application of the RF hollow anode is based on the surface modification as yielded in-situ/in-vacuo almost immediately after treatment. In case the RF hollow anode is operated with hydrocarbon, silane or other gases, it can also be employed for thin base-coatings or top-coatings on web material.

M. Geisler; G. Hoffmann; R. Ludwig; G. Steiniger

2004-01-01T23:59:59.000Z

440

A uniform glow discharge plasma source at atmospheric pressure  

Science Journals Connector (OSTI)

An atmospheric-pressure uniform continuous glowplasma was produced in ambient air assisted by argon feeding gas using a 13.56 MHz rf source. Based on the measured currentvoltage curve and optical emission spectrum intensity the plasma showed typical glow discharge characteristics free from streamers and arc. The measured rotational and vibrational temperatures were in the range of 490 to 630 K and 2000 to 3300 K respectively within the operation range of argon flow rate and rf power. From the spatial measurement of total optical emission intensity and rotational and vibrational temperatures the plasma shows very high uniformity (over 93%) in the lengthwise direction. The plasma size for this study was 200 mm50 mm5 mm although a plasma was produced in the scaled-up version of 600 mm in length aiming for large-area plasma applications.

Se Youn Moon; W. Choe; B. K. Kang

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Safety assessment of discharge chute isolation barrier preparation and installation  

SciTech Connect

This analysis examines activities associated with the installation of isolation barriers in the K Basins at the Hanford Reservation. This revision adds evaluation of barrier drops on stored fuel and basin floor, identifies fuel which will be moved and addresses criticality issues with sludge. The safety assessment is made for the activities for the preparation and installation of the discharge chute isolation barriers. The safety assessment includes a hazard assessment and comparisons of potential accidents/events to those addressed by the current safety basis documentation. No significant hazards were identified. An evaluation against the USQ evaluation questions was made and the determination made that the activities do not represent a USQ. Hazard categorization techniques were used to provide a basis for readiness review classifications.

Meichle, R.H.

1994-10-21T23:59:59.000Z

442

Equilibrium and Stability of Partial Toroidal Plasma Discharges  

SciTech Connect

The equilibrium and stability of partial toroidal flux ropes are studied in detail in the laboratory, motivated by ubiquitous loop structures on the solar surface. The flux ropes studied here are magnetized arc discharges formed in the Magnetic Reconnection Experiment (MRX). It is found that these loops robustly maintain their equilibrium on time scales much longer than the Alfven time over a wide range of plasma current, guide eld strength, and angle between electrodes, even in the absence of a strapping fi eld. Additionally, the external kink stability of these flux ropes is found to be governed by the Kruskal-Shafranov limit for a flux rope with line-tied boundary conditions at both ends (q > 1).

E. Oz, C. E. Myers, M. Yamada, H. Ji, R. Kulsrud, and J. Xie

2011-01-04T23:59:59.000Z

443

Review on electrical discharge plasma technology for wastewater remediation  

Science Journals Connector (OSTI)

Abstract As wastewater remediation becomes a global concern, the development of innovative advanced oxidation processes for wastewater treatment is still a major challenge. With regard to its fast removal rate and environmental compatibility, plasma technology is considered as a promising remediation technology for water remediation. The principles of electrical plasma with liquids for pollutant removal and the reactors of various electrical discharge types are outlined in this review. To improve energy efficiency, combination of plasma technology with catalysts has attracted significant attention. The present review is concerned about present understanding of the mechanisms involved in these combined processes. Further on, detailed discussions are given of the effects of various factors on the performance of pulsed electrical plasma technology in water treatment processes. Finally, special attention is paid to the future challenges of plasma technology utilized for industrial wastewater treatment.

Bo Jiang; Jingtang Zheng; Shi Qiu; Mingbo Wu; Qinhui Zhang; Zifeng Yan; Qingzhong Xue

2014-01-01T23:59:59.000Z

444

Turbulence characteristics of electron cyclotron and ohmic heated discharges  

E-Print Network (OSTI)

Turbulence characteristics of electron cyclotron (EC) and ohmic heated (OH) discharges has been analyzed by electrostatic gyrokinetic simulations with GYRO [J. Candy, R.E. Waltz, Journal of Computational Physics 186, 545-581 (2003)] aiming to find insights into the effect of auxiliary heating on the transport. Trapped electron modes are found to be unstable in both OH and the EC heated scenarios. In the OH case the main drive is from the density gradient and in the EC case from the electron temperature gradient. The growth rates and particle fluxes exhibit qualitatively different scaling with the electron-to-ion temperature ratios in the two cases. This is mainly due to the fact that the dominant drives and the collisionalities are different. The inward flow velocity of impurities and the impurity diffusion coefficient decreases when applying EC heating, which leads to lower impurity peaking, consistently with experimental observations.

Pusztai, Istvan; Fulop, Tunde; Timchenko, Natalia

2011-01-01T23:59:59.000Z

445

Characteristics of microinstabilities in electron cyclotron and ohmic heated discharges  

SciTech Connect

Characteristics of microinstabilities in electron cyclotron (EC) and ohmic heated (OH) discharges in the T10 tokamak have been analyzed by linear electrostatic gyrokinetic simulations with gyro[J. Candy and R. E. Waltz, J. Comput. Phys. 186, 545 (2003)] aiming to find insights into the effect of auxiliary heating on the transport. Trapped electron modes are found to be unstable in both OH and the EC heated scenarios. In the OH case the main drive is from the density gradient and in the EC case from the electron temperature gradient. The growth rates and particle fluxes exhibit qualitatively different scaling with the electron-to-ion temperature ratios in the two cases. This is mainly due to the fact that the dominant drives and the collisionalities are different. The inward flow velocity of impurities and the impurity diffusion coefficient decreases when applying EC heating, which leads to lower impurity peaking, consistently with experimental observations.

Pusztai, I.; Moradi, S.; Fueloep, T. [Department of Applied Physics, Nuclear Engineering, Chalmers University of Technology and Euratom-VR Association, Goeteborg (Sweden); Timchenko, N. [Institute of Tokamak Physics, NRC ''Kurchatov Institute,'' 123182, Kurchatov Sq. 1, Moscow (Russian Federation)

2011-08-15T23:59:59.000Z

446

Calculation Method for the Projection of Future Spent Nuclear Fuel Discharges  

SciTech Connect

This report describes the calculation method developed for the projection of future utility spent nuclear fuel (SNF) discharges in regard to their timing, quantity, burnup, and initial enrichment. This projection method complements the utility-supplied RW-859 data on historic discharges and short-term projections of SNF discharges by providing long-term projections that complete the total life cycle of discharges for each of the current U.S. nuclear power reactors. The method was initially developed in mid-1999 to update the SNF discharge projection associated with the 1995 RW-859 utility survey (CRWMS M&O 1996). and was further developed as described in Rev. 00 of this report (CRWMS M&O 2001a). Primary input to the projection of SNF discharges is the utility projection of the next five discharges from each nuclear unit, which is provided via the revised final version of the Energy Information Administration (EIA) 1998 RW-859 utility survey (EIA 2000a). The projection calculation method is implemented via a set of Excel 97 spreadsheets. These calculations provide the interface between receipt of the utility five-discharge projections that are provided in the RW-859 survey, and the delivery of projected life-cycle SNF discharge quantities and characteristics in the format requisite for performing logistics analysis to support design of the Civilian Radioactive Waste Management System (CRWMS). Calculation method improvements described in this report include the addition of a reactor-specific maximum enrichment-based discharge burnup limit. This limit is the consequence of the enrichment limit, currently 5 percent. which is imposed as a Nuclear Regulatory Commission (NRC) license condition on nuclear fuel fabrication plants. In addition, the calculation method now includes the capability for projecting future nuclear plant power upratings, consistent with many such recent plant uprates and the prospect of additional future uprates. Finally. this report summarizes the results of the 2002 Reference SNF Discharge Projection.

B. McLeod

2002-02-28T23:59:59.000Z

447

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

All Documents listed below are part of the Photon Sciences Directorate and All Documents listed below are part of the Photon Sciences Directorate and will be updated as needed. Photon Sciences ESH Standard Operating Procedures (SOPs) SOP No. Standard Operating Procedure for: LS-ES-0002 Procedure for Acid Etching of Silicon and Germanium Crystals LS-ESH-0004 NSLS Operations Group Chemical Spill and Gas Release Response LS-ESH-0010 VUV Injection Shutter LOTO LS-ESH-0012 LINAC LOTO LS-ESH-0013 Controlled Access to the VUV Ring LS-ESH-0014 Radiation Safety Interlocks at the National Synchrotron Light Source LS-ESH-0019 Beam Line Configuration Control Checklist Requirements LS-ESH-0020 Biosafety Requirements at the NSLS LS-ESH-0021 Biosafety Level 2 work at the NSLS/ A Technical Basis LS-ESH-0022 Beam Line Configuration Control Checklist Requirements

448

Light modulating device  

DOE Patents (OSTI)

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

1989-01-01T23:59:59.000Z

449

Light modulating device  

DOE Patents (OSTI)

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

450

Cost effective lighting  

SciTech Connect

Long-life replacement lamps for the incandescent lamp have been evaluated with regard to their cost effectiveness. The replacements include the use of energy buttons that extend lamp life as well as an adaptive fluorescent circline lamp that will fit into existing incandescent lamp sockets. The initial, operating, and replacement costs for one million lumen-hours are determined for each lamp system. We find the most important lighting cost component is the operating cost. Using lamps that are less efficient or devices that cause lamps to operate less efficiently are not cost-effective. The adaptive fluorescent circline lamp, even at an initial cost of $15.00, is the most cost effective source of illumination compared to the incandescent lamp and lamp systems examined. 3 refs., 6 tabs.

Morse, O.; Verderber, R.

1987-07-01T23:59:59.000Z

451

Realistic Lighting in Autodesk Maya with Mental Ray Area Light.  

E-Print Network (OSTI)

?? The knowledge on how to create realistic lighting in computer graphics is one part that sets a realistic scene apart from one that can (more)

Larsson, Nichlas

2012-01-01T23:59:59.000Z

452

Enhanced Light Extraction from Organic Light Emitting Diodes...  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Photovoltaic Solar Photovoltaic Industrial Technologies Industrial Technologies Advanced Materials Advanced Materials Find More Like This Return to Search Enhanced Light...

453

Diagnostics of a glow discharge used to produce hydrogenated amorphous silicon films. Final subcontract report  

SciTech Connect

This report and recent publications cited summarize our measurements of the neutral radicals produced in pure silane discharges, our measurements of the interaction of silane with a growing amorphous silicon surface, qualitative models of discharge neutral radical chemistry, and quantitative models of dc discharge ion chemistry. All radicals of the monosilane and disilane groups have been measured and are reported as a function of discharge parameters, but not yet for the full range of parameters that must be investigated for detailed analysis. Observations of the reaction of SiH/sub 4/ with a hot amorphous silicon surface are given. These are closely related to the dominant discharge film deposition mechanism of SiH/sub 3/ reacting with a hydrogen covered amorphous silicon surface and a surface reaction model is suggested that explains some but not all of our data. The dc discharge model is used to obtain quantitative predictions of the ion species at the cathode surface of a dc discharge. This is compared to observations and used to explain the observations at our laboratory and other laboratories. We conclude that most but not all features of the ion chemistry in dc discharges of pure silane can be relatively well understood from this model.

Gallagher, A.

1984-11-01T23:59:59.000Z

454

Helium corona-assisted air discharge Nan Jiang, Lei Gao, Ailing Ji, and Zexian Caoa)  

E-Print Network (OSTI)

of non-thermal plasmas. By taking advantage of the low onset voltage for helium corona, air discharge of vacuum. In order to reduce the expense associated with vacuum systems, many atmospheric non- thermal profit the application of non-thermal plasmas. Inspired by our own research on gas discharges, espe

Zexian, Cao

455

Vacuum 71 (2003) 417436 The barrier discharge: basic properties and applications to  

E-Print Network (OSTI)

discharge; Non-equilibrium plasma; Cross-correlation spectroscopy; Atmospheric pressure glow discharge field of applications are the non-thermal plasma condi- tions at low gas temperatures and at elevated-equilibrium plasmas in a controllable way at atmospheric pressure, and at moderate gas temperature. They provide

Greifswald, Ernst-Moritz-Arndt-Universität

456

Survival in lake water of Klebsiella pneumoniae discharged by a paper mill.  

Science Journals Connector (OSTI)

...Klebsiella pneumoniae discharged by a paper mill. S I Niemela P Vaatanen We investigated...receiving bacteria mainly from a paper mill. An mFC-inositol-carbenicillin-agar...Klebsiella pneumoniae discharged by a paper mill. | We investigated survival of Klebsiella...

S I Niemel; P Vtnen

1982-08-01T23:59:59.000Z

457

Electric organ discharge patterns during group hunting by a mormyrid fish  

E-Print Network (OSTI)

Electric organ discharge patterns during group hunting by a mormyrid fish Matthew E. Arnegard1 Department of Biology, University of Virginia, Charlottesville, VA 22904, USA Weakly electric fish emit and receive low-voltage electric organ discharges (EODs) for electrolocation and communication. Since

Hopkins, Carl D.

458

Synthesis Gas Production from Partial Oxidation of Methane with Air in AC Electric Gas Discharge  

E-Print Network (OSTI)

Synthesis Gas Production from Partial Oxidation of Methane with Air in AC Electric Gas Discharge K 73019 Received October 11, 2002 In this study, synthesis gas production in an AC electric gas discharge of methane and air mixtures at room temperature and ambient pressure was investigated. The objective

Mallinson, Richard

459

Spectroscopy of atmospheric pressure air jet plasma in transverse arc discharge Valeriy Chernyak1  

E-Print Network (OSTI)

Spectroscopy of atmospheric pressure air jet plasma in transverse arc discharge Valeriy Chernyak1 of the atmospheric pressure air jet plasma in the transverse cw dc arc discharge of high voltage was done. Within.g. application of approximation of the optically thin plasma in conditions of high atmospheric pressure

Paris-Sud XI, Université de

460

Interplay of discharge and gas flow in atmospheric pressure plasma jets Nan Jiang,1  

E-Print Network (OSTI)

Interplay of discharge and gas flow in atmospheric pressure plasma jets Nan Jiang,1 JingLong Yang,2 2011) Interplay of discharge and gas flow in the atmospheric pressure plasma jets generated with three:10.1063/1.3581067] I. INTRODUCTION The atmospheric pressure plasma jet (APPJ) that is nor- mally

Zexian, Cao

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Attenuation of single-tone ultrasound by an atmospheric glow discharge plasma barrier  

E-Print Network (OSTI)

Attenuation of single-tone ultrasound by an atmospheric glow discharge plasma barrier Vadim P through an atmospheric pressure glow discharge in air was studied experimentally. The plasma obtained in and around the plasma using laser-induced Rayleigh scattering technique. Results show

?tügen, Volkan

462

Fundamentals of Discharge Initiation in Gas-Fed Pulsed Plasma Thrusters  

E-Print Network (OSTI)

-conductivity arc discharges are required for critically-damped matching of circuit components, and that relativelyFundamentals of Discharge Initiation in Gas-Fed Pulsed Plasma Thrusters IEPC-2005-153 Presented at the 29th International Electric Propulsion Conference, Princeton University October 31 ­ November 4, 2005

Choueiri, Edgar

463

Development of Corona Discharge Apparatus for Supersonic Flow Philip K. Panicker*  

E-Print Network (OSTI)

are inherently at high pressures and densities, and thus arc discharge breakdown occurs at higher voltages1 Development of Corona Discharge Apparatus for Supersonic Flow Philip K. Panicker* , U Department, University of Texas at Arlington, Arlington, TX 76019 and Bernard T. Svihel¶ Electrical

Texas at Arlington, University of

464

Simple Method of Preparing Graphene Flakes by an Arc-Discharge Method  

Science Journals Connector (OSTI)

Simple Method of Preparing Graphene Flakes by an Arc-Discharge Method ... It is noteworthy that graphene can be doped with boron and nitrogen by carrying out the electric discharge in the presence of B2H6 and pyridine, respectively. ...

K. S. Subrahmanyam; L. S. Panchakarla; A. Govindaraj; C. N. R. Rao

2009-02-20T23:59:59.000Z

465

Hormonal control of sexual differentiation: changes in electric organ discharge waveform  

Science Journals Connector (OSTI)

...Africa, the electric organ dis-charges (EOD's) of males and females B. brachyistius...the "electromotoneurons" (6, 7). The EOD is elicited by a burst of three spikes in...Oscilloscope records of electric organ discharge (EOD) waveforms scaled to the same peak-to-peak...

AH Bass; CD Hopkins

1983-05-27T23:59:59.000Z

466

Longitudinal discharge XeCl excimer laser with automatic UV preionization  

SciTech Connect

A longitudinal discharge XeCl 308-nm excimer laser operated with automatic spark UV preionization is reported. Laser oscillation has been obtained using a four-segmented longitudinal discharge tube of 260 mm length and 4 mm inner diameter and employing a capacitor transfer circuit with commercially available doorknob ceramic capacitors. Spark UV preionization has been found to increase the laser output energy.

Furuhashi, H.; Hiramatsu, M.; Goto, T.

1987-04-06T23:59:59.000Z

467

PARTIAL DISCHARGE TESTING OF DEFECTIVE THREE-PHASE PILC CABLE UNDER RATED CONDITIONS  

E-Print Network (OSTI)

PARTIAL DISCHARGE TESTING OF DEFECTIVE THREE-PHASE PILC CABLE UNDER RATED CONDITIONS J. A. Hunter 1 lifespan. An increase in the failure rates of paper insulated lead covered (PILC) cables that make up is to document the effects of mechanical stress on the generation of partial discharge (PD) for cables of PILC

Southampton, University of

468

On the description of the bearing capacity of electro-discharge machined G.P Petropoulosa  

E-Print Network (OSTI)

electro-discharge machining (EDM) is the most widely and successfully applied for the machining of variousOn the description of the bearing capacity of electro-discharge machined surfaces G.P Petropoulosa with the investigation of a set of "non-common" surface topography parameters of EDMed surfaces that describe

Aristomenis, Antoniadis

469

Review of river discharge records and gauging stations in the Rwenzori Mountains of Uganda  

E-Print Network (OSTI)

Review of river discharge records and gauging stations in the Rwenzori Mountains of Uganda Richard Department Directorate of Water Development Entebbe, Uganda November 2004 Review of river discharge records and gauging stations in the Rwenzori Mountains of Uganda 1 #12;Summary This report provides an overview

Jones, Peter JS

470

Interaction between shallow groundwater, saline surface water and contaminant discharge at a seasonally  

E-Print Network (OSTI)

the behaviour of the hydrocarbon plume at the groundwater/surface water transition zone to be strongly B.V. All rights reserved. Keywords: Ground water; Surface water; Hydrocarbons; Discharge; TidesInteraction between shallow groundwater, saline surface water and contaminant discharge

Clement, Prabhakar

471

Comparative Study of Plasma Anodization of Silicon in a Column of a dc Glow Discharge  

Science Journals Connector (OSTI)

A comparative study of plasma anodization of silicon in the column of a dc oxygen glow discharge is presented. Quantitative results for growth rates of silicon dioxide in the negative glow Faraday dark space positive column and the anode fall are given. It is observed that the growth rate is higher in the positive column than the other regions of the discharge.

M. A. Copeland; R. Pappu

1971-01-01T23:59:59.000Z

472

Operation of ferroelectric plasma sources in a gas discharge modea... A. Dunaevskyb)  

E-Print Network (OSTI)

. Fisch Princeton Plasma Physics Laboratory, Princeton University, P.O. Box 451, Princeton, New JerseyOperation of ferroelectric plasma sources in a gas discharge modea... A. Dunaevskyb) and N. J plasma sources in vacuum are known as sources of ablative plasma, formed due to surface discharge

473

Smart Street Lights | GE Global Research  

NLE Websites -- All DOE Office Websites (Extended Search)

LightGrid Provides Real-Time Feedback From Street Lights LightGrid Provides Real-Time Feedback From Street Lights You use a GPS to provide real-time data from your car. Now,...

474

Towards a better understanding of dielectric barrier discharges in ferroelectrets: Paschen breakdown fields in micrometer sized voids  

SciTech Connect

Charged cellular polypropylene foams (i.e., ferro- or piezoelectrets) demonstrate high piezoelectric activity upon being electrically charged. When an external electric field is applied, dielectric barrier discharges (DBDs) occur, resulting in a separation of charges which are subsequently deposited on dielectric surfaces of internal micrometer sized voids. This deposited space charge is responsible for the piezoelectric activity of the material. Previous studies have indicated charging fields larger than predicted by Townsend's model of Paschen breakdown applied to a multilayered electromechanical model; a discrepancy which prompted the present study. The actual breakdown fields for micrometer sized voids were determined by constructing single cell voids using polypropylene spacers with heights ranging from 8 to 75??m, sandwiched between two polypropylene dielectric barriers and glass slides with semi-transparent electrodes. Subsequently, a bipolar triangular charging waveform with a peak voltage of 6?kV was applied to the samples. The breakdown fields were determined by monitoring the emission of light due to the onset of DBDs using an electron multiplying CCD camera. The breakdown fields at absolute pressures from 101 to 251?kPa were found to be in good agreement with the standard Paschen curves. Additionally, the magnitude of the light emission was found to scale linearly with the amount of gas, i.e., the height of the voids. Emissions were homogeneous over the observed regions of the voids for voids with heights of 25??m or less and increasingly inhomogeneous for void heights greater than 40??m at high electric fields.

Harris, Scott, E-mail: harri4s@cmich.edu [Department of Physics and Science of Advanced Materials Program, Central Michigan University, Mount Pleasant, Michigan 48859 (United States); Applied Condensed-Matter Physics, Department of Physics and Astronomy, University of Potsdam, Karl-Liebknecht-Str. 24-25, 14476 Potsdam-Golm (Germany); Mellinger, Axel, E-mail: axel.mellinger@cmich.edu [Department of Physics and Science of Advanced Materials Program, Central Michigan University, Mount Pleasant, Michigan 48859 (United States)

2014-04-28T23:59:59.000Z

475

Light Sources Directorate Strategic Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Sources Directorate Light Sources Directorate Strategic Plan December 2009 Light Sources Directorate Strategic Plan December 2009 ii | Vision and Mission Light Sources Directorate Strategic Plan The VISION of the Light Sources Directorate is: to be a provider of choice for world-class photon science and facilities that deliver outstanding scientific productivity and impact, and to be recognized as a leader in developing innovative techniques and ap- plications of photon science Our MISSION is defined by the set of activities that are required to realize this vision: to advance scientific knowledge and to solve critical problems through the design, construction, operation, and use of premier photon science facilities | Table of Contents Light Sources Directorate Strategic Plan

476

Lighting Controls/Sensors | Open Energy Information  

Open Energy Info (EERE)

Lighting ControlsSensors Incentives Retrieved from "http:en.openei.orgwindex.php?titleLightingControlsSensors&oldid267...

477

GRR/Section 15-OR-a - Air Contaminant Discharge Permit | Open Energy  

Open Energy Info (EERE)

5-OR-a - Air Contaminant Discharge Permit 5-OR-a - Air Contaminant Discharge Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 15-OR-a - Air Contaminant Discharge Permit 15ORAAirContaminantDischargePermit (1).pdf Click to View Fullscreen Contact Agencies Oregon Department of Environmental Quality Regulations & Policies ORS Chapter 468a OAR 340-209 OAR 340-216 340-216-0020 (Table 1) Triggers None specified Click "Edit With Form" above to add content 15ORAAirContaminantDischargePermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The Oregon Department of Environmental Quality (DEQ) regulates air

478

The Determination of the Location of Contact Electrification-Induced Discharge Events  

Science Journals Connector (OSTI)

As the charge on the sphere accumulates, the resulting electric field at the surface of the sphere eventually exceeds the breakdown limit of air and causes a discharge. ... (39) Understanding the factors that influence the probability of discharge will contribute to a fundamental understanding of the charging and discharging that characterize contact electrification, as well as to the development of strategies to control the likelihood and/or location of discharges, and thus to minimize the risk of sparking. ... Using this configuration of the RST, we demonstrated that the location of a plasma-oxidized wedge (with an arc of 0.11? rad) on a PS dish can be determined based on our method of locating discharges. ...

Sarah J. Vella; Xin Chen; Samuel W. Thomas III; Xuanhe Zhao; Zhigang Suo; George M. Whitesides

2010-09-29T23:59:59.000Z

479

Studies of Low-Current Back-Discharge in Point-Plane Geometry with Dielectric Layer  

SciTech Connect

The paper presents results of spectroscopic investigations of back-discharges generated in the point-plane electrode geometry in ambient air at atmospheric pressure, with the plane electrode covered with a dielectric layer. Fly ash from an electrostatic precipitator of a coal-fired power plant was used as the dielectric layer in these investigations. The discharges for positive and negative polarities of the needle electrode were studied by measuring optical emission spectra at two regions of the discharge: near the needle electrode and dielectric layer surface. The visual forms of the discharge were recorded and correlated with the current-voltage characteristics and optical emission spectra. The back-arc discharge was of particular interest in these studies due to its detrimental effects it causes in electrostatic precipitators.

Jaworek, Anatol; Rajch, Eryk [Institute of Physics Pomeranian Pedagogical Academy, Arciszewskiego 22b, 76-200 Slupsk (Poland); Krupa, Andrzej; Czech, Tadeusz; Lackowski, Marcin [Institute of Fluid Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk (Poland)

2006-01-15T23:59:59.000Z

480

Observation and numerical analysis of plasma parameters in a capillary discharge-produced plasma channel waveguide  

SciTech Connect

We observed the parameters of the discharge-produced plasma in cylindrical capillary. Plasma parameters of the waveguide were investigated by use of both a Normarski laser interferometer and a hydrogen plasma line spectrum. A space-averaged maximum temperature of 3.3 eV with electron densities of the order of 10{sup 17} cm{sup -3} was observed at a discharge time of 150 ns and a maximum discharge current of 200 A. One-dimensional dissipative magnetohydrodynamic (MHD) code was used to analyze the discharge dynamics in the gas-filled capillary discharge waveguide for high-intensity laser pulses. Simulations were performed for the conditions of the experiment. We compared the temporal behavior of the electron temperature and the radial electron density profiles, measured in the experiment with the results of the numerical simulations. They occurred to be in a good agreement. An ultrashort, intense laser pulse was guided by use of this plasma channel.

Terauchi, Hiromitsu [Department of Advanced Interdisciplinary Sciences, and Center for Optical Research and Education (CORE) Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Bobrova, Nadezhda; Sasorov, Pavel [Institute for Theoretical and Experimental Physics, B. Cheremushkinskaya str. 25, 117259 Moscow (Russian Federation); Kikuchi, Takashi; Sasaki, Toru [Department of Electrical Engineering, Nagaoka University of Technology, Kami-tomiokamachi 1603-1, Nagaoka, Niigata 940-2188 Japan (Japan); Higashiguchi, Takeshi; Yugami, Noboru [Department of Advanced Interdisciplinary Sciences, and Center for Optical Research and Education (CORE) Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Japan Science and Technology Agency, CREST, 4-1-8 Honcho, Kanagawa, Saitama 332-0012 (Japan); Kodama, Ryosuke [Japan Science and Technology Agency, CREST, 4-1-8 Honcho, Kanagawa, Saitama 332-0012 (Japan); Graduate School of Engineering, Osaka University, 2-6 Yamada-oka, Suita, Osaka 565-0871 (Japan)

2011-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "discharge hid lights" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

GRR/Section 14-AK-b - Alaska Pollutant Discharge Elimination System Permit  

Open Energy Info (EERE)

GRR/Section 14-AK-b - Alaska Pollutant Discharge Elimination System Permit GRR/Section 14-AK-b - Alaska Pollutant Discharge Elimination System Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-AK-b - Alaska Pollutant Discharge Elimination System Permit 14AKBAlaskaPollutantDischargeEliminationSystemPermit (1).pdf Click to View Fullscreen Contact Agencies Alaska Department of Environmental Conservation United States Environmental Protection Agency Regulations & Policies Alaska Statutes Alaska Administrative Code Triggers None specified Click "Edit With Form" above to add content 14AKBAlaskaPollutantDischargeEliminationSystemPermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

482

Turbo-Charged Lighting Design  

E-Print Network (OSTI)

TURBO-CHARGED LIGHTING DESIGN William H. Clark II Design Engineer O'Connell Robertson & Assoc Austin/ Texas ABSTRACT The task of the lighting designer has become very complex, involving thousands of choices for fixture types and hundreds... at this point. will read the data into the lighting file and clear the screen for the next calculation. The designer has access to over one hundred fixture types (expandable indefinitely). The most useful ones are displayed on the screen. The balance...

Clark, W. H. II

483

HIGH-RESOLUTION FOURIER TRANSFORM SPECTROSCOPY OF LANTHANUM IN Ar DISCHARGE IN THE NEAR-INFRARED  

SciTech Connect

A high-resolution spectrum of lanthanum has been recorded by a Fourier Transform spectrometer in the wavelength range from 833 nm to 1666 nm (6000 cm{sup 1} to 12,000 cm{sup 1}) using as light source a hollow cathode lamp operated with argon as the discharge carrier gas. In total, 2386 spectral lines were detected in this region, of which 555 lines could be classified as La I transitions and 10 lines as La II transitions. All La II transitions and 534 of these La I transitions were classified for the first time, and 6 of the La II transitions and 433 of the classified La I transitions appear to be new lines, which could not be found in the literature. The corresponding energy level data of classified lines are given. Additionally, 430 lines are assigned as Ar I lines and 394 as Ar II lines, of which 179 and 77, respectively, were classified for the first time. All 77 classified Ar II transitions as well as 159 of the classified Ar I transitions are new lines. Furthermore, the wavenumbers of 997 unclassified spectral lines were determined, 235 of which could be assigned as La lines, because of their hyperfine pattern. The remaining 762 lines may be either unclassified Ar lines or unresolved and unclassified La lines with only one symmetrical peak with an FWHM in the same order of magnitude as the Ar lines. The accuracy of the wavenumber for the classified lines with signal-to-noise-ratio higher than four is better than 0.006 cm{sup 1} which corresponds to an accuracy of 0.0004 nm at 830 nm and 0.0017 nm at 1660 nm, respectively.

Gzelimen, F.; Ba?ar, G. [Faculty of Science, Physics Department, Istanbul University, Tr-34134 Vezneciler, Istanbul (Turkey); Tamanis, M.; Kruzins, A.; Ferber, R. [Laser Centre, The University of Latvia, Rainis Boulevard 19, LV-1586 Riga (Latvia); Windholz, L. [Institut fr Experimentalphysik, Technische Universitt Graz, A-8010 Graz, Petersgasse 16 (Austria); Krger, S., E-mail: gbasar@istanbul.edu.tr, E-mail: sophie.kroeger@htw-berlin.de [Hochschule fr Technik und Wirtschaft Berlin, Wilhelminenhofstr. 75A, D-12459 Berlin (Germany)

2013-10-01T23:59:59.000Z

484

Presentation: Synchrotron Radiation Light Sources  

Energy.gov (U.S. Department of Energy (DOE))

A briefing to the Secretary's Energy Advisory Board on Synchrotron Radiation Light Sources delivered by Patricia Dehmer, U.S. Department of Energy

485

Pedestrian-Friendly Nighttime Lighting  

Energy.gov (U.S. Department of Energy (DOE))

This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety, and adaptation. When it comes to outdoor...

486

Photonic crystal light emitting diode.  

E-Print Network (OSTI)

?? This master's thesis describe electromagnetic simulations of a gallium antimonide (GaSb) light emitting diode, LED. A problem for such devices is that most of (more)

Leirset, Erlend

2010-01-01T23:59:59.000Z

487

Linac Coherent Light Source Overview  

ScienceCinema (OSTI)

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

None

2013-05-29T23:59:59.000Z

488

Energy Savings Activities-Lighting  

K-12 Energy Lesson Plans and Activities Web site (EERE)

Students use the scientific method to examine school lighting technologies and determine if there are opportunities to save energy and money.

489

Light Water Reactor Sustainability Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

hydraulics software RELAP-7 (which is under development in the Light Water Reactor Sustainability LWRS Program). A novel interaction between the probabilistic part (i.e., RAVEN)...

490

Light Water Reactor Sustainability Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

and nuclear waste disposal. Dr. Corradini has extensive research experience in the phenomenology of beyond design basis Meet the New LWRS Program Pathway Lead accidents in light...

491

Nittany Lights Landscape Lighting Sept. 28-30, 2012  

E-Print Network (OSTI)

Nittany Lights ­ Landscape Lighting Workshop Sept. 28-30, 2012 Penn State Campus - University Park with a lecture at the Palmer Art Museum to be provided by internationally known architectural/landscape artist get a chance to think beyond budgets, maintenance, codes, etc and get back to the fun creative side

492

Book review Light Scattering Reviews 4: Single Light Scattering and  

E-Print Network (OSTI)

-monograph on the use of space-time Green functions in the description of the diffusive radiation transport in active equation of the radiative transfer theory in the classical style of the ``Soviet'' school of radiativeBook review Light Scattering Reviews 4: Single Light Scattering and Radiative Transfer, A

493

Organic Light Emitting Diode for White Light Emission  

E-Print Network (OSTI)

During the last few years, research based on energy saving technologies is being given high priority all over the world. General lighting is one area in which large quantity of electrical energy is being spend and substantial energy saving is possible by using energy saving technologies. Conventional light sources like incandescent filament lamps in which a major

M. N. Kamalasanan; Ritu Srivastava; Gayatri Chauhan; An Kumar; Amit Kumar; M. N. Kamalasanan; Ritu Srivastava; Gayatri Chauhan; An Kumar; Priyanka Tayagi; Amit Kumar

494

EK101 Engineering Light Project: Evaluate Residential Lighting  

E-Print Network (OSTI)

for residential lighting (LED, Compact Fluorescent, Incandescent). Develop a plan of experiments to be conducted, CF, and Incandescent bulbs for the past ten years. (try the wayback time machine if other sources fail). Discuss the key challenges associated with a transition from incandescent lighting

Bifano, Thomas

495

Monitored lighting energy savings from dimmable lighting controls in The  

NLE Websites -- All DOE Office Websites (Extended Search)

Monitored lighting energy savings from dimmable lighting controls in The Monitored lighting energy savings from dimmable lighting controls in The New York Times Headquarters Building Title Monitored lighting energy savings from dimmable lighting controls in The New York Times Headquarters Building Publication Type Journal Article LBNL Report Number LBNL-6171E Year of Publication 2013 Authors Fernandes, Luis L., Eleanor S. Lee, Dennis L. DiBartolomeo, and Andrew McNeil Journal Energy and Buildings Volume 68 Issue A Pagination 498-514 Date Published 01/2014 Keywords Building energy-efficiency, daylighting, lighting control systems Abstract Digital addressable, dimmable lighting controls were introduced to the US market in the early 2000s with the promise of facilitating capture of potential energy savings with greater flexibility over their historic, typically unreliable, analog counterpart. The New York Times Company installed this emerging technology, after having tested the system thoroughly prior to procurement, in their new building in New York, New York. Four years after full occupancy in 2007, the owner agreed to participate in a post-occupancy monitored evaluation of the dimmable lighting system to verify actual performance in the field. Annual lighting energy savings from daylighting, setpoint tuning and occupancy controls were determined for the daylit, open-plan office areas on three typical floors (6, 11, and 20th floors) of the 51-story high-rise tower. Energy savings were calculated from ballast control signal and occupancy data recorded by the manufacturer's lighting control system. The ballast data were calibrated with independent measurements of lighting energy consumption. Savings from dimming controls (daylighting and setpoint tuning) were 12.6 kWh/m2-yr (1.17 kWh/ft2-yr) for the daylit spaces on the three floors overall, or 20%, relative to ASHRAE 90.1-2007. Compared to the prescriptive code in effect at the time of the building's construction (ASHRAE 90.1-2001), savings were 21.0 kWh/m2-yr (1.95 kWh/ft2-yr) or 28%. Annual lighting energy use with all lighting control strategies was 33.9 kWh/m2-yr (3.15 kWh/ft2-yr) in the daylit, open plan zones on average for the three floors. A simple payback analysis was conducted.

496

Types of Lighting in Commercial Buildings - Lighting Types  

U.S. Energy Information Administration (EIA) Indexed Site

Lighting Types Lighting Types The following are the most widely used types of lighting equipment used in commercial buildings. Characteristics such as energy efficiency, light quality, and lifetime vary by lamp type. Standard Fluorescent A fluorescent lamp consists of a sealed gas-filled tube. The gas in the tube consists of a mixture of low pressure mercury vapor and an inert gas such as argon. The inner surface of the tube has a coating of phosphor powder. When an electrical current is applied to electrodes in the tube, the mercury vapor emits ultraviolet radiation which then causes the phosphor coating to emit visible light (the process is termed fluorescence). A ballast is required to regulate and control the current and voltage. Two types of ballasts are used, magnetic and electronic. Electronic ballasts

497

Types of Lighting in Commercial Buildings - Lighting Characteristics  

U.S. Energy Information Administration (EIA) Indexed Site

Characteristics of Lighting Types Characteristics of Lighting Types Efficacy Efficacy is the amount of light produced per unit of energy consumed, expressed in lumens per watt (lm/W). Lamps with a higher efficacy value are more energy efficient. Average Rated Life The average rated life of a particular type of lamp is defined by the number of hours when 50 percent of a large sample of that type of lamp has failed. Color Rendering Index (CRI) The CRI is a measurement of a light source's accuracy in rendering different colors when compared to a reference light source. The highest attainable CRI is 100. Lamps with CRIs above 70 are typically used in office and living environments. Correlated Color Temperature (CCT) The CCT is an indicator of the "warmth" or "coolness" of the color

498

Buildings*","Lit Buildings","Lighting Equipment Types  

U.S. Energy Information Administration (EIA) Indexed Site

4. Lighting Equipment, Floorspace for Non-Mall Buildings, 2003" 4. Lighting Equipment, Floorspace for Non-Mall Buildings, 2003" ,"Total Floorspace (million square feet)" ,"All Buildings*","Lit Buildings","Lighting Equipment Types (more than one may apply)" ,,,"Incand- escent","Standard Fluor- escent","Compact Fluor- escent","High-Intensity Discharge","Halogen" "All Buildings* ...............",64783,62060,38528,59688,27571,20643,17703 "Building Floorspace" "(Square Feet)" "1,001 to 5,000 ...............",6789,6038,2918,5579,1123,312,604 "5,001 to 10,000 ..............",6585,6090,3061,5726,1109,686,781 "10,001 to 25,000 .............",11535,11229,6424,10458,2944,1721,1973

499

Buildings*","Lit Buildings","Lighting Equipment Types  

U.S. Energy Information Administration (EIA) Indexed Site

3. Lighting Equipment, Number of Buildings for Non-Mall Buildings, 2003" 3. Lighting Equipment, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Lit Buildings","Lighting Equipment Types (more than one may apply)" ,,,"Incand- escent","Standard Fluor- escent","Compact Fluor- escent","High-Intensity Discharge","Halogen" "All Buildings* ...............",4645,4248,2184,3943,941,455,565 "Building Floorspace" "(Square Feet)" "1,001 to 5,000 ...............",2552,2261,1070,2068,382,101,205 "5,001 to 10,000 ..............",889,821,416,772,148,88,107 "10,001 to 25,000 .............",738,716,412,665,189,105,123 "25,001 to 50,000 .............",241,231,145,223,102,60,55

500

Physical Layer Characteristics and Techniques for Visible Light Communications  

E-Print Network (OSTI)

as tra?c lights, street lights, and automobile headlights orarea where numerous street lights and advertising boardslighting purposes (e.g. , street light, decoration light,

Cui, Kaiyun

2012-01-01T23:59:59.000Z