Powered by Deep Web Technologies
Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building  

E-Print Network [OSTI]

15 4.1. LightingEvaluation of the Dimmable Lighting, Automated Shading, andcomparison EUI, kBtu/Gsf Lighting Heating Cooling Pumps/C

2013-01-01T23:59:59.000Z

2

Monitored lighting energy savings from dimmable lighting controls in The New York Times Headquarters Building  

E-Print Network [OSTI]

A. , D’Herdt, P. , 2008, Lighting energy savings in officesLux Europa, 11 th European Lighting Conference, Istanbul,evaluation of the dimmable lighting, automated shading, and

Fernandes, Luis L.

2014-01-01T23:59:59.000Z

3

Monitored lighting energy savings from dimmable lighting controls in  

E-Print Network [OSTI]

, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark 94720, USA Abstract Digital addressable, dimmable lighting controls were introduced to the US market

4

Using Dimmable Lighting for Regulation Capacity and Non-Spinning Reserves in the Ancillary Services Market. A Feasibility Study.  

E-Print Network [OSTI]

Digital Addressable Lighting Interface Demand Responseof Demand-Responsive Lighting in Offices with and without2010). Using Dimmable Lighting for Regulation Capacity and

Rubinstein, Francis

2011-01-01T23:59:59.000Z

5

Energy Conservation Utilizing Wireless Dimmable Lighting Control  

E-Print Network [OSTI]

results & discussion Future research #12;2 Background & Motivation Energy Usage & Potential Savings Lighting accounts for 25-30% of energy usage in building electrical systems Energy savings can be generated Energy Efficiency with Personal Lighting Preferences Light level tuning · Generates energy savings

Agogino, Alice M.

6

Efficient Driver for Dimmable White LED Lighting.  

E-Print Network [OSTI]

??A high efficiency driver circuit is proposed for Light Emitting Diode (LED) lamps with dimming feature. The current regulation is accomplished by processing partial power… (more)

Yang, Wen-ching

2011-01-01T23:59:59.000Z

7

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building  

E-Print Network [OSTI]

energy use comparison EUI, kBtu/Gsf Lighting Heating Coolinguse comparison Annual EUI, kBtu/sf-yr Lighting Heating

2013-01-01T23:59:59.000Z

8

Using Dimmable Lighting for Regulation Capacity and Non-Spinning Reserves in the Ancillary Services Market. A Feasibility Study.  

SciTech Connect (OSTI)

The objective of this Feasibility Study was to identify the potential of dimmable lighting for providing regulation capacity and contingency reserves if massively-deployed throughout the State. We found that one half of the total electric lighting load in the California commercial sector is bottled up in larger buildings that are greater an 50,000 square feet. Retrofitting large California buildings with dimmable lighting to enable fast DR lighting would require an investment of about $1.8 billion and a"fleet" of about 56 million dimming ballasts. By upgrading the existing installed base of lighting and controls (primarily in large commercial facilities) a substantial amount of ancillary services could be provided. Though not widely deployed, today's state-of-the art lighting systems, control systems and communication networks could be used for this application. The same lighting control equipment that is appropriate for fast DR is also appropriate for achieving energy efficiency with lighting on a daily basis. Thus fast DR can leverage the capabilities that are provided by a conventional dimming lighting control system. If dimmable lighting were massively deployed throughout large California buildings (because mandated by law, for example) dimmable lighting could realistically supply 380 MW of non-spinning reserve, 47percent of the total non-spinning reserves needed in 2007.

Rubinstein, Francis; Xiaolei, Li; Watson, David S.

2010-12-03T23:59:59.000Z

9

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading,  

E-Print Network [OSTI]

and Urban Systems Department Environmental Energy Technologies Division January 2013 #12;! #12;2 Disclaimer owned rights. Reference herein to any specific commercial product, process, or service by its trade name Department of Energy; Dustin Davis, California Energy Commission; Adam Hinge, Sustainable Energy Partnerships

10

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building  

E-Print Network [OSTI]

Sustainable Energy Partnerships, Tarrytown, New York. Clear,Release: Average energy prices in New York – Northern NewYork Times Company. The New York State Energy Research and

2013-01-01T23:59:59.000Z

11

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building  

E-Print Network [OSTI]

with a sound, integrated building design, and then to paydesign, efficient technology and properly integrated buildingintegrated whole building systems Achieving a high level of building performance is the result of careful, informed design and execution so that building

2013-01-01T23:59:59.000Z

12

A post-occupancy monitored evaluation of the dimmable lighting, automated shading, and underfloor air distribution system in The New York Times Building  

E-Print Network [OSTI]

underfloor variable speed fan-coil units) that serves as afor the perimeter fan-coil units (typically prescribed bycooling setpoints in the fan-coil unit controllers instead

Lee, Eleanor S.

2014-01-01T23:59:59.000Z

13

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building  

E-Print Network [OSTI]

underfloor variable speed fan-coil units) that serves as afor the perimeter fan-coil units (typically prescribed bycooling setpoints in the fan-coil unit controllers instead

2013-01-01T23:59:59.000Z

14

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building  

E-Print Network [OSTI]

and controlled using sun sensors with solar calculations tousing outdoor sensors, calculating solar position, andsolar radiation, both incident on the shielded temperature sensor and

2013-01-01T23:59:59.000Z

15

A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building  

E-Print Network [OSTI]

1.3 W/ft 2 and scheduling and occupancy controls implementedcompared to scheduling and occupancy based control weredimming (d) No controls (a) Scheduling (b) – ASHRAE 90.1-

2013-01-01T23:59:59.000Z

16

ECE 466: LED Lighting Systems -Incandescent lightings rise and  

E-Print Network [OSTI]

versus cost - Power Electronic Drives for CFL and LED light sources to achieve dimmable operation - Basic electric AC and DC circuits at Sophomore level or equivalents Absolutes Lighting System Requirements index as a metric of a light source - Power Electronic Energy sources driving light sources in a compact

Schumacher, Russ

17

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 3 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: "Dimmability." Allow occupants to choose the appropriate light

California at Davis, University of

18

Image Recognition System for Automated Lighting Retrofit Assessment  

E-Print Network [OSTI]

, and K. Baugh, ?Spectral Identification of Lighting Type and Character,? Sensors, vol. 10, pp. 3961-3988, 2010. (3) L. Halonen, E. Tetri, and P. Bhusal, ?Guidebook on Energy Efficient Electric Lighting for Buildings,? Espoo, Finland: Dept. Elect. Eng...

Venable, K.; Bhatia, D.; Coverick, R.; Gutierrez, C.; Knight, J.; McGarry, D.; McGee, K.; Smith, Z.; Terrill, T. J.; Vanderford, B.; Weiser, R.; Wightman, K.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

19

Better than CFL? Dimmable LED Downlights in Hospitality Facilities Webinar  

Broader source: Energy.gov [DOE]

LEDs represent less than 1% of the installed base of U.S. downlights, which in 2012 numbered about 700 million. In hospitality facilities, past efforts to reduce lighting energy use have mainly...

20

Using Dimmable Lighting for Regulation Capacity and Non-Spinning Reserves in  

E-Print Network [OSTI]

in this report was supported by the Demand Response Research Center and funded by the California Energy of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy ..........................................8 2.1.3. Technical Potential for Regulation Capacity and Contingency Reserves...........9 2

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Development of an automated Red Light Violation Detection System (RLVDS) for Indian vehicles  

E-Print Network [OSTI]

Integrated Traffic Management Systems (ITMS) are now implemented in different cities in India to primarily address the concerns of road-safety and security. An automated Red Light Violation Detection System (RLVDS) is an integral part of the ITMS. In our present work we have designed and developed a complete system for generating the list of all stop-line violating vehicle images automatically from video snapshots of road-side surveillance cameras. The system first generates adaptive background images for each camera view, subtracts captured images from the corresponding background images and analyses potential occlusions over the stop-line in a traffic signal. Considering round-the-clock operations in a real-life test environment, the developed system could successfully track 92% images of vehicles with violations on the stop-line in a "Red" traffic signal.

Saha, Satadal; Nasipuri, Mita; Basu, Dipak Kumar

2010-01-01T23:59:59.000Z

22

Test Automation Test Automation  

E-Print Network [OSTI]

Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

Mousavi, Mohammad

23

E-Print Network 3.0 - automated red light Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

green hypocotyls and cotyledons, while... those germinated under cool white fluorescent light had ... Source: Lovern, Matthew Benjamin - Department of Zoology, Oklahoma...

24

Demand Responsive Lighting: A Scoping Study  

SciTech Connect (OSTI)

The objective of this scoping study is: (1) to identify current market drivers and technology trends that can improve the demand responsiveness of commercial building lighting systems and (2) to quantify the energy, demand and environmental benefits of implementing lighting demand response and energy-saving controls strategies Statewide. Lighting systems in California commercial buildings consume 30 GWh. Lighting systems in commercial buildings often waste energy and unnecessarily stress the electrical grid because lighting controls, especially dimming, are not widely used. But dimmable lighting equipment, especially the dimming ballast, costs more than non-dimming lighting and is expensive to retrofit into existing buildings because of the cost of adding control wiring. Advances in lighting industry capabilities coupled with the pervasiveness of the Internet and wireless technologies have led to new opportunities to realize significant energy saving and reliable demand reduction using intelligent lighting controls. Manufacturers are starting to produce electronic equipment--lighting-application specific controllers (LAS controllers)--that are wirelessly accessible and can control dimmable or multilevel lighting systems obeying different industry-accepted protocols. Some companies make controllers that are inexpensive to install in existing buildings and allow the power consumed by bi-level lighting circuits to be selectively reduced during demand response curtailments. By intelligently limiting the demand from bi-level lighting in California commercial buildings, the utilities would now have an enormous 1 GW demand shed capability at hand. By adding occupancy and light sensors to the remotely controllable lighting circuits, automatic controls could harvest an additional 1 BkWh/yr savings above and beyond the savings that have already been achieved. The lighting industry's adoption of DALI as the principal wired digital control protocol for dimming ballasts and increased awareness of the need to standardize on emerging wireless technologies are evidence of this transformation. In addition to increased standardization of digital control protocols controller capabilities, the lighting industry has improved the performance of dimming lighting systems over the last two years. The system efficacy of today's current dimming ballasts is approaching that of non-dimming program start ballasts. The study finds that the benefits of applying digital controls technologies to California's unique commercial buildings market are enormous. If California were to embark on an concerted 20 year program to improve the demand responsiveness and energy efficiency of commercial building lighting systems, the State could avoid adding generation capacity, improve the elasticity of the grid, save Californians billion of dollars in avoided energy charges and significantly reduce greenhouse gas emissions.

Rubinstein, Francis; Kiliccote, Sila

2007-01-03T23:59:59.000Z

25

Test Automation Ant JUnit Test Automation  

E-Print Network [OSTI]

Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

Mousavi, Mohammad

26

Controls for Solid-State Lighting  

SciTech Connect (OSTI)

This study predicts new hybrid lighting applications for LEDs. In hybrid lighting, LEDs provide a low-energy 'standby' light level while another, more powerful, efficient light source provides light for occupied periods. Lighting controls will allow the two light sources to work together through an appropriate control strategy, typically motion-sensing. There are no technical barriers preventing the use of low through high CRI LEDs for standby lighting in many interior and exterior applications today. The total luminous efficacy of LED systems could be raised by increasing the electrical efficiency of LED drivers to the maximum practically achievable level (94%). This would increase system luminous efficacy by 20-25%. The expected market volumes for many types of LEDs should justify the evolution of new LED drivers that use highly efficient ICs and reduce parts count by means of ASICs. Reducing their electronics parts count by offloading discrete components onto integrated circuits (IC) will allow manufacturers to reduce the cost of LED driver electronics. LED luminaire manufacturers will increasingly integrate the LED driver and thermal management directly in the LED fixture. LED luminaires of the future will likely have no need for separable lamp and ballast because the equipment life of all the LED luminaire components will all be about the same (50,000 hours). The controls and communications techniques used for communicating with conventional light sources, such as dimmable fluorescent lighting, are appropriate for LED illumination for energy management purposes. DALI has been used to control LED systems in new applications and the emerging ZigBee protocol could be used for LEDs as well. Major lighting companies are already moving in this direction. The most significant finding is that there is a significant opportunity to use LEDs today for standby lighting purposes. Conventional lighting systems can be made more efficient still by using LEDs to provide a low-energy standby state when lower light levels are acceptable.

Rubinstein, Francis

2007-06-22T23:59:59.000Z

27

Coordinating Automated Vehicles via Communication  

E-Print Network [OSTI]

1.1 Vehicle Automation . . . . . . . . . . . 1.1.1 Controlareas of technology in vehicle automation and communicationChapter 1 Introduction Vehicle Automation Automation is an

Bana, Soheila Vahdati

2001-01-01T23:59:59.000Z

28

Automation Status  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: Scope ChangeL-01-06 AuditAugust 5,Re evised June 2010 AutomNREL

29

Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan Office  

SciTech Connect (OSTI)

An installation in a Federal building tested the effectiveness of a highly-controlled, workstation-specific lighting retrofit. The study took place in an open-office area with 86 cubicles and low levels of daylight. Each cubicle was illuminated by a direct/indirectpendant luminaire with three 32 watt lamps, two dimmable DALI ballasts, and an occupancy sensor. A centralized control system programmed all three lamps to turn on and off according to occupancy on a workstation-by-workstation basis. Field measurements taken over the course of several monthsdemonstrated 40% lighting energy savings compared to a baseline without advanced controls that conforms to GSA's current retrofit standard. A photometric analysis found that the installation provided higher desktop light levels than the baseline, while an occupant survey found that occupants in general preferred the lighting system to thebaseline.Simple payback is fairly high; projects that can achieve lower installation costs and/or higher energy savings and those in which greenhouse gas reduction and occupant satisfaction are significant priorities provide the ideal setting for workstation-specific lighting retrofits.

Rubinstein, Francis; Enscoe, Abby

2010-04-19T23:59:59.000Z

30

Multiplex automated genome engineering  

DOE Patents [OSTI]

The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells.

Church, George M; Wang, Harris H; Isaacs, Farren J

2013-10-29T23:59:59.000Z

31

An Integrated Solid-State LED Luminaire for General Lighting  

SciTech Connect (OSTI)

A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

2009-03-31T23:59:59.000Z

32

Remote-Controlled Home Automation Systems with Different Network Technologies  

E-Print Network [OSTI]

in order to close a circuit of a battery and light bulb. Later, companies developed automated systems word formed from domus (Latin, meaning house) and robotics" (click on this link for more information

Grout, Vic

33

Charmaine Toy Automation Engineer,  

E-Print Network [OSTI]

@me.berkeley.edu Nonstationary Velocity Profiles for Emergency Vehicles on Automated Highways This paper explores the notion and usefulness of nonstationary velocity profiles for high priority emergency vehicle transit on automatedCharmaine Toy Automation Engineer, DiCon Fiberoptics, Inc., Richmond, CA 94804 e-mail: charm

Horowitz, Roberto

34

Joint Genome Institute's Automation Approach and History  

E-Print Network [OSTI]

Joint Genome Institute’s Automation Approach and Historythroughput environment; – automation does not necessarilyissues “Islands of Automation” – modular instruments with

Roberts, Simon

2006-01-01T23:59:59.000Z

35

An Automation System for Optimizing a Supply Chain Network Design under the Influence of Demand Uncertainty  

E-Print Network [OSTI]

Automation . . . . . . . . . . . . . . . . . . . . . . iii 3Automation . . . . . . . . . . . . . . . . . . . . . . 5Dashboard/Cockpit Automation . . . . . . . . . . . . .

Polany, Rany

2012-01-01T23:59:59.000Z

36

Architectures of Test Automation 1 High Volume Test AutomationHigh Volume Test Automation  

E-Print Network [OSTI]

Architectures of Test Automation 1 High Volume Test AutomationHigh Volume Test Automation Cem Kaner Institute of Technology October 2003 #12;Architectures of Test Automation 2 Acknowledgements developed a course on test automation architecture, and in the Los Altos Workshops on Software Testing

37

Copyright (c) Cem Kaner, Automated Testing. 1 Software Test Automation:Software Test Automation  

E-Print Network [OSTI]

Copyright (c) Cem Kaner, Automated Testing. 1 Software Test Automation:Software Test Automation: A RealA Real--World ProblemWorld Problem Cem Kaner, Ph.D., J.D. #12;Copyright (c) Cem Kaner, Automated Testing. 2 This TalkThis Talk The most widely used class of automated testing tools leads senior software

38

High Volume Test Automation 1 High Volume Test AutomationHigh Volume Test Automation  

E-Print Network [OSTI]

High Volume Test Automation 1 High Volume Test AutomationHigh Volume Test Automation Keynote Automation 2 AcknowledgementsAcknowledgements · Many of the ideas in this presentation were initially jointly developed with Doug Hoffman,as we developed a course on test automation architecture, and in the Los Altos

39

A Verified Hybrid Controller For Automated Vehicles  

E-Print Network [OSTI]

con- trollers for vehicle automation," in American ControlTomizuka, Vehicle lateral control for highway automation,"

Lygeros, J.; Godbole, D. N.; Sastry, S.

1997-01-01T23:59:59.000Z

40

Automated Demand Response and Commissioning  

E-Print Network [OSTI]

Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities”

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

RF test bench automation Description  

E-Print Network [OSTI]

RF test bench automation Description: Callisto would like to implement automated RF test bench. Three RF test benches have to be studied and automated: LNA noise temperature test bench LNA gain phase of the test benches and an implementation of the automation phase. Tasks: Noise temperature

Dobigeon, Nicolas

42

Cognitive Engineering Automation and Human  

E-Print Network [OSTI]

· Home automation · Robotics · Unmanned vehicles (UAVs and UGVs) · Drug design/Molecular geneticsCognitive Engineering PSYC 530 Automation and Human Performance Raja Parasuraman #12;Overview Automation-Related Accidents Levels and Stages of Automation Information Acquisition and Analysis Decision

Parasuraman, Raja

43

Automated Lattice Perturbation Theory  

SciTech Connect (OSTI)

I review recent developments in automated lattice perturbation theory. Starting with an overview of lattice perturbation theory, I focus on the three automation packages currently "on the market": HiPPy/HPsrc, Pastor and PhySyCAl. I highlight some recent applications of these methods, particularly in B physics. In the final section I briefly discuss the related, but distinct, approach of numerical stochastic perturbation theory.

Monahan, Christopher

2014-11-01T23:59:59.000Z

44

Psychophysical evaluations of modulated color rendering for energy performance of LED-based architectural lighting  

E-Print Network [OSTI]

This thesis is focused on the visual perception evaluation of colors within an environment of a highly automated lighting control strategy. Digitally controlled lighting systems equipped with light emitting diodes, LEDs, ...

Thompson, Maria do Rosário

2007-01-01T23:59:59.000Z

45

Demonstration of Automated Heavy-Duty Vehicles  

E-Print Network [OSTI]

a future in which vehicle automation technologies are ableto support the heavy vehicle automation including PrecisionCommittee on Vehicle-Highway Automation, and the attendees

2006-01-01T23:59:59.000Z

46

Development of Building Automation and Control Systems  

E-Print Network [OSTI]

A design flow for building automation and control systems,’’Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

2012-01-01T23:59:59.000Z

47

General approach to automation of FLASH subsystems  

E-Print Network [OSTI]

General approach to automation of FLASH subsystems Boguslaw Kosda #12;Agenda Motivation Nature of automation software for high energy experiments. Ultimate role of the automation software: Maximization of lasers availability. Automation of routine activities as startup, shutdown ... Continuous monitoring

48

Robotics and Manufacturing Automation Laboratory (Mechanical Eng'g Dept.) STANDARD OPERATING PROCEDURE (SOP)  

E-Print Network [OSTI]

Robotics and Manufacturing Automation Laboratory (Mechanical Eng'g Dept.) STANDARD OPERATING on the robot control unit and the computer. Once the controller has booted, the green light on the indicator and audible alarm #12;Robotics and Manufacturing Automation Laboratory (Mechanical Eng'g Dept.) STANDARD

Thompson, Michael

49

Honeywell Demonstrates Automated Demand Response Benefits for...  

Office of Environmental Management (EM)

Honeywell Demonstrates Automated Demand Response Benefits for Utility, Commercial, and Industrial Customers Honeywell Demonstrates Automated Demand Response Benefits for Utility,...

50

Solid Edge ActiveXSolid Edge ActiveX AutomationAutomation  

E-Print Network [OSTI]

;Solid Edge ActiveX AutomationSolid Edge ActiveX Automation How ActiveX Automation works?How ActiveX Automation works? In Solid Edge, every document, every part, and every feature ofIn Solid Edge, everySolid Edge ActiveXSolid Edge ActiveX AutomationAutomation Creating Automation Client Using

Krovi, Venkat

51

Automated Microbial Genome Annotation  

SciTech Connect (OSTI)

Miriam Land of the DOE Joint Genome Institute at Oak Ridge National Laboratory gives a talk on the current state and future challenges of moving toward automated microbial genome annotation at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

Land, Miriam [DOE Joint Genome Institute at Oak Ridge National Laboratory

2009-05-29T23:59:59.000Z

52

Office Automation Document Preparation  

E-Print Network [OSTI]

.2 Distinctions 1.3 Facilities 1.3.1 Document Preparation 1.3.2 Records Management 1.3.3 Communication 1 organizations contemplating the installation of document-preparation systems. * Administrative managersOffice Automation and Document Preparation for the v' University of North Carolina at Chapel Hill

North Carolina at Chapel Hill, University of

53

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

E-Print Network [OSTI]

Protocol for Building Automation and Control  Networks.  Protocol for Building Automation and Control  Networks, Demand Response Automation Server  Demand Response Research 

Kiliccote, Sila

2011-01-01T23:59:59.000Z

54

White Paper Series An Overview of Automated Enforcement  

E-Print Network [OSTI]

a driver that ran a red light (1). The 2011 Traffic Safety Culture Index by AAA found that ninety Pedestrian and Bicyclist Safety December 2012 Bryan Poole, UNC HSRC/PBIC For: Federal Highway Administration on pedestrian and bicycle safety. The final section discusses how automated enforcement systems should be seen

North Carolina at Chapel Hill, University of

55

Automated gas chromatography  

DOE Patents [OSTI]

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

56

Automated Job Hazards Analysis  

Broader source: Energy.gov [DOE]

AJHA Program - The Automated Job Hazard Analysis (AJHA) computer program is part of an enhanced work planning process employed at the Department of Energy's Hanford worksite. The AJHA system is routinely used to performed evaluations for medium and high risk work, and in the development of corrective maintenance work packages at the site. The tool is designed to ensure that workers are fully involved in identifying the hazards, requirements, and controls associated with tasks.

57

Methodology for Prototyping Increased Levels of Automation  

E-Print Network [OSTI]

of automation than previous NASA vehicles, due to program requirements for automation, including Automated Ren into a human space flight vehicle, NASA has created the Function-specific Level of Autonomy and Automation Tool levels of automation than previous NASA vehicles. A key technology to the success of the CEV

Valasek, John

58

Virtual Machine in Automation Projects.  

E-Print Network [OSTI]

?? Virtual machine, as an engineering tool, has recently been introduced into automation projects in Tetra Pak Processing System AB. The goal of this paper… (more)

Xing, Xiaoyuan

2010-01-01T23:59:59.000Z

59

Valliappa Lakshmanan Automating the Analysis of  

E-Print Network [OSTI]

Geospatial Images January 5, 2012 Springer #12;Contents 1 Automated Analysis of Spatial Grids: MotivationValliappa Lakshmanan Automating the Analysis of Spatial Grids A Practitioner's Guide to Data Mining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.5 Challenges in Automated Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1

Lakshmanan, Valliappa

60

automation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Automated fiber pigtailing machine  

DOE Patents [OSTI]

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

62

Methods for Multisweep Automation  

SciTech Connect (OSTI)

Sweeping has become the workhorse algorithm for creating conforming hexahedral meshes of complex models. This paper describes progress on the automatic, robust generation of MultiSwept meshes in CUBIT. MultiSweeping extends the class of volumes that may be swept to include those with multiple source and multiple target surfaces. While not yet perfect, CUBIT's MultiSweeping has recently become more reliable, and been extended to assemblies of volumes. Sweep Forging automates the process of making a volume (multi) sweepable: Sweep Verification takes the given source and target surfaces, and automatically classifies curve and vertex types so that sweep layers are well formed and progress from sources to targets.

SHEPHERD,JASON F.; MITCHELL,SCOTT A.; KNUPP,PATRICK; WHITE,DAVID R.

2000-09-14T23:59:59.000Z

63

Automated fiber pigtailing machine  

DOE Patents [OSTI]

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectonic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems.

Strand, Oliver T. (Castro Valley, CA); Lowry, Mark E. (Castro Valley, CA)

1999-01-01T23:59:59.000Z

64

Installation and Commissioning Automated Demand Response Systems  

E-Print Network [OSTI]

their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

65

We explore two new automated methods to quantify the impact of pain on the overall  

E-Print Network [OSTI]

the light to dark compartment. In the thermal operant task (thermal track), the floor of the dark (intraplanter injection of carrageenan model). Rats were individually placed in the light box and their crossing compartments. METHODS Fraction of Animals in the Dark Automated Thermal and Motoric Operant Task Differentiates

Apkarian, A. Vania

66

EXTERIOR LIGHTING CASE STUDY CALIFORNIA LIGHTING TECHNOLOGY CENTER, UC DAVIS PHONE: (530) 747-3838 FAX: (530) 747-3812 CLTC.UCDAVIS.EDU  

E-Print Network [OSTI]

. This energy waste can easily be averted by implementing energy-efficient light sources and lighting controls.S. health care facilities to install an energy-efficient, ultra-smart outdoor LED lighting system. The award schedules, light levels and time-out settings, monitor the system's energy use, and receive automated alerts

California at Davis, University of

67

Robust automated knowledge capture.  

SciTech Connect (OSTI)

This report summarizes research conducted through the Sandia National Laboratories Robust Automated Knowledge Capture Laboratory Directed Research and Development project. The objective of this project was to advance scientific understanding of the influence of individual cognitive attributes on decision making. The project has developed a quantitative model known as RumRunner that has proven effective in predicting the propensity of an individual to shift strategies on the basis of task and experience related parameters. Three separate studies are described which have validated the basic RumRunner model. This work provides a basis for better understanding human decision making in high consequent national security applications, and in particular, the individual characteristics that underlie adaptive thinking.

Stevens-Adams, Susan Marie; Abbott, Robert G.; Forsythe, James Chris; Trumbo, Michael Christopher Stefan; Haass, Michael Joseph; Hendrickson, Stacey M. Langfitt

2011-10-01T23:59:59.000Z

68

Communication in automation, including networking and wireless  

E-Print Network [OSTI]

Communication in automation, including networking and wireless Nicholas Kottenstette and Panos J and networking in automation is given. Digital communication fundamentals are reviewed and networked control are presented. 1 Introduction 1.1 Why communication is necessary in automated systems Automated systems use

Antsaklis, Panos

69

ABV-A Low Speed Automation Project to Study the Technical Feasibility of Fully Automated Driving  

E-Print Network [OSTI]

on vehicle automation since many years. From 1987 to 1995 the European Commission funded the 800 million concepts of vehicles designed as fully automated vehicles [1]. Beyond its fully automation ability Automated Highway System Consortium (NAHSC) that demonstrated about 20 automated vehicles in Demo'97 on I-15

Paris-Sud XI, Université de

70

Towards Automated Service Composition using Policy Ontology in Building Automation System  

E-Print Network [OSTI]

Towards Automated Service Composition using Policy Ontology in Building Automation System Son N.crespi}@it-sudparis.eu Abstract--Automated service composition is critical for suc- cessfully implementing Building Automation-service composition; semantic web; policy; ontol- ogy; building automation system; I. INTRODUCTION In building

Paris-Sud XI, Université de

71

Home Network Technologies and Automating Demand Response  

SciTech Connect (OSTI)

Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

McParland, Charles

2009-12-01T23:59:59.000Z

72

Automated Assembly Using Feature Localization  

E-Print Network [OSTI]

Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations ...

Gordon, Steven Jeffrey

1986-12-01T23:59:59.000Z

73

Aspects of automation mode confusion  

E-Print Network [OSTI]

Complex systems such as commercial aircraft are difficult for operators to manage. Designers, intending to simplify the interface between the operator and the system, have introduced automation to assist the operator. In ...

Wheeler, Paul H. (Paul Harrison)

2007-01-01T23:59:59.000Z

74

Automation of Termination: Abstracting CCG through MWG Automation of Termination: Abstracting Calling  

E-Print Network [OSTI]

Automation of Termination: Abstracting CCG through MWG Automation of Termination: Abstracting of Termination: Abstracting CCG through MWG Motivation Termination analysis is a fundamental topic in computer science. While classical results state the undecidability of various termination problems, automated

Ayala-Rincón, Mauricio

75

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network [OSTI]

Figure 2. Demand Response Automation Server and BuildingII system to notify the Automation Server of an up comingoccurs day-ahead). 2. The Automation Server posts two pieces

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

76

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network [OSTI]

of Fully Automated Demand  Response in Large Facilities.  Fully Automated Demand Response Tests in Large Facilities.  Open Automated  Demand Response Communication Standards: 

Dudley, June Han

2009-01-01T23:59:59.000Z

77

Commercial Lighting  

Broader source: Energy.gov [DOE]

Commercial lighting accounts for more than 20 percent of total commercial building energy use. The Energy Department works to reduce lighting energy use through research and deployment.

78

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

E-Print Network [OSTI]

Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

Thompson, Lisa

2008-01-01T23:59:59.000Z

79

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network [OSTI]

Linking Continuous Energy Management and Open AutomatedKeywords: Continuous Energy Management, Automated Demandlinking continuous energy management and continuous

Piette, Mary Ann

2009-01-01T23:59:59.000Z

80

Automation in image cytometry : continuous HCS and kinetic image cytometry  

E-Print Network [OSTI]

OF CALIFORNIA, SAN DIEGO Automation in Image Cytometry:xiv Abstract of Dissertation Automation in Image Cytometry:

Charlot, David J.

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Automated hybridization/imaging device for fluorescent multiplex DNA sequencing  

DOE Patents [OSTI]

A method is disclosed for automated multiplex sequencing of DNA with an integrated automated imaging hybridization chamber system. This system comprises an hybridization chamber device for mounting a membrane containing size-fractionated multiplex sequencing reaction products, apparatus for fluid delivery to the chamber device, imaging apparatus for light delivery to the membrane and image recording of fluorescence emanating from the membrane while in the chamber device, and programmable controller apparatus for controlling operation of the system. The multiplex reaction products are hybridized with a probe, the enzyme (such as alkaline phosphatase) is bound to a binding moiety on the probe, and a fluorogenic substrate (such as a benzothiazole derivative) is introduced into the chamber device by the fluid delivery apparatus. The enzyme converts the fluorogenic substrate into a fluorescent product which, when illuminated in the chamber device with a beam of light from the imaging apparatus, excites fluorescence of the fluorescent product to produce a pattern of hybridization. The pattern of hybridization is imaged by a CCD camera component of the imaging apparatus to obtain a series of digital signals. These signals are converted by the controller apparatus into a string of nucleotides corresponding to the nucleotide sequence an automated sequence reader. The method and apparatus are also applicable to other membrane-based applications such as colony and plaque hybridization and Southern, Northern, and Western blots. 9 figs.

Weiss, R.B.; Kimball, A.W.; Gesteland, R.F.; Ferguson, F.M.; Dunn, D.M.; Di Sera, L.J.; Cherry, J.L.

1995-11-28T23:59:59.000Z

82

Automated hybridization/imaging device for fluorescent multiplex DNA sequencing  

DOE Patents [OSTI]

A method is disclosed for automated multiplex sequencing of DNA with an integrated automated imaging hybridization chamber system. This system comprises an hybridization chamber device for mounting a membrane containing size-fractionated multiplex sequencing reaction products, apparatus for fluid delivery to the chamber device, imaging apparatus for light delivery to the membrane and image recording of fluorescence emanating from the membrane while in the chamber device, and programmable controller apparatus for controlling operation of the system. The multiplex reaction products are hybridized with a probe, then an enzyme (such as alkaline phosphatase) is bound to a binding moiety on the probe, and a fluorogenic substrate (such as a benzothiazole derivative) is introduced into the chamber device by the fluid delivery apparatus. The enzyme converts the fluorogenic substrate into a fluorescent product which, when illuminated in the chamber device with a beam of light from the imaging apparatus, excites fluorescence of the fluorescent product to produce a pattern of hybridization. The pattern of hybridization is imaged by a CCD camera component of the imaging apparatus to obtain a series of digital signals. These signals are converted by the controller apparatus into a string of nucleotides corresponding to the nucleotide sequence an automated sequence reader. The method and apparatus are also applicable to other membrane-based applications such as colony and plaque hybridization and Southern, Northern, and Western blots.

Weiss, Robert B. (Salt Lake City, UT); Kimball, Alvin W. (Salt Lake City, UT); Gesteland, Raymond F. (Salt Lake City, UT); Ferguson, F. Mark (Salt Lake City, UT); Dunn, Diane M. (West Valley City, UT); Di Sera, Leonard J. (Salt Lake City, UT); Cherry, Joshua L. (Salt Lake City, UT)

1995-01-01T23:59:59.000Z

83

INTRODUCTION Sophisticated automation is becoming ubiq-  

E-Print Network [OSTI]

INTRODUCTION Sophisticated automation is becoming ubiq- uitous, appearing in work environments as di- verse as aviation, maritime operations, process control, motor vehicle operation, and informa- tion retrieval. Automation is technology that actively selects data, transforms information, makes

Lee, John D.

84

Disciplined agility for process control & automation  

E-Print Network [OSTI]

Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

85

Technical University of Denmark rsted DTU Automation  

E-Print Network [OSTI]

Technical University of Denmark �rsted · DTU Automation Project: SICAM - SIngle Conversion stage based SICAM using an LC-network Petar Ljusev, MSc., Ph.D. student, �rsted · DTU Automation e-mail: pl

86

The Automation Of Proof By Mathematical Induction   

E-Print Network [OSTI]

This paper is a chapter of the Handbook of Automated Reasoning edited by Voronkov and Robinson. It describes techniques for automated reasoning in theories containing rules of mathematical induction. Firstly, inductive reasoning is defined and its...

Bundy, Alan

87

An Ontology-based Model to Determine the Automation Level of an Automated Vehicle for  

E-Print Network [OSTI]

An Ontology-based Model to Determine the Automation Level of an Automated Vehicle for Co). In addition, an automated vehicle should also self-assess its own perception abilities, and not only perceive this idea, cybercars were designed as fully automated vehicles [3], thought since its inception as a new

Paris-Sud XI, Université de

88

TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING 1 Automated Guiding Task of a Flexible Micropart  

E-Print Network [OSTI]

TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING 1 Automated Guiding Task of a Flexible Micropart Lutz, Member, IEEE Abstract--This paper studies automated tasks based on hybrid force/position control of automated guiding task are presented. Note to Practitioners -- This article's motivation is the need of very

Paris-Sud XI, Université de

89

Transport Research Arena Europe 2010, Brussels Towards Highly Automated Driving  

E-Print Network [OSTI]

of HAVEit is to develop and investigate vehicle automation beyond ADAS systems, especially highly automated automated vehicles In 2010, two lines of research and development exist in the domain of ground vehicle automation: Either the automation is driving the vehicle fully automated without a human driver

Paris-Sud XI, Université de

90

Automated Tuning of Optimization Software Parameters  

E-Print Network [OSTI]

Automated Tuning of Optimization Software Parameters. University of Pittsburgh Department of Industrial Engineering. Technical Report 2007-7. Mustafa Baz ...

2007-10-29T23:59:59.000Z

91

Technical Report TRARP1695 Automated Reasoning Project  

E-Print Network [OSTI]

Technical Report TR­ARP­16­95 Automated Reasoning Project Research School of Information Sciences Heuerding Automated Institute for Applied Mathematics Reasoning Project and Computer Science ANU University that contains automated proof procedures based on modal Gentzen systems for numerous propositional (nonclassical

Goré, Rajeev

92

Feasible Path Synthesis for Automated Guided Vehicles  

E-Print Network [OSTI]

Feasible Path Synthesis for Automated Guided Vehicles Reijer Idema 2005 TU Delft FROG Navigation for Automated Guided Vehicles Author: Reijer Idema Supervisors: prof.dr.ir. P. Wesseling (TU Delft) dr.ir. Kees is a manufacturer of Automated Guided Vehicles. They have developed a multitude of vehicles that transport products

Vuik, Kees

93

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML  

E-Print Network [OSTI]

INTEGRATING AUTOMATION DESIGN INFORMATION WITH XML Mika Viinikkala, Seppo Kuikka Institute of Automation and Control, Tampere University of Technology, P.O. Box 692, 33101 Tampere, Finland Email: mika.viinikkala@tut.fi, seppo.kuikka@tut.fi Keywords: Systems integration, XML, automation design Abstract: This paper presents

94

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS  

E-Print Network [OSTI]

A DISTRIBUTED AUTOMATION SYSTEM FOR ELECTROPHYSICAL INSTALLATIONS V.R. Kozak Budker Institute There was designed a set of devices for automation systems of physical installations. On this basis approach. KEY WORDS Automation, systems, applications, CANBUS, embedded, controller. 1. Introduction Budker

Kozak, Victor R.

95

Comparison lamps automation CTIO 60 inches Echelle  

E-Print Network [OSTI]

Comparison lamps automation CTIO 60 inches Echelle ECH60S5.1 La Serena, December 09, 2009 #12)...............................................................................12 CTIO 60 inches Echelle / Comparison lamps automation, ECH60S5.1 2 #12;Introduction The present document is just a brief summary of the work done automating the 60 inches echelle comparison lamps

Tokovinin, Andrei A.

96

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION  

E-Print Network [OSTI]

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION An Intelligent Web Service for Operation 2004 Examiner: Prof. Seppo Kuikka #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Jaakkola, Veli-Pekka: An Intelligent Web Service for Operation

97

Comparison lamps automation CTIO 60 inches CHIRON  

E-Print Network [OSTI]

Comparison lamps automation CTIO 60 inches CHIRON CHI60HF5.2 La Serena, March 16, 2011 #12;Table)...............................................................................12 CTIO 60 inches Chiron / Comparison lamps automation, CHI60HF5.2 2 #12;Introduction The present document is just a brief summary of the work done automating the 60 inches chiron comparison lamps

Tokovinin, Andrei A.

98

Real time automated inspection  

DOE Patents [OSTI]

A method and apparatus are described relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections. 43 figs.

Fant, K.M.; Fundakowski, R.A.; Levitt, T.S.; Overland, J.E.; Suresh, B.R.; Ulrich, F.W.

1985-05-21T23:59:59.000Z

99

Smart Lighting Controller!! Smart lighting!  

E-Print Network [OSTI]

1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if://blogs.stthomas.edu/realestate/2011/01/24/residential-real-estate-professionals-how-do-you- develop feedback! There is a connection between the output and the input! Therefore forces inputs to same voltage

Anderson, Betty Lise

100

Specimen coordinate automated measuring machine/fiducial automated measuring machine  

DOE Patents [OSTI]

The Specimen coordinate Automated Measuring Machine (SCAMM) and the Fiducial Automated Measuring Machine (FAMM) is a computer controlled metrology system capable of measuring length, width, and thickness, and of locating fiducial marks. SCAMM and FAMM have many similarities in their designs, and they can be converted from one to the other without taking them out of the hot cell. Both have means for: supporting a plurality of samples and a standard; controlling the movement of the samples in the +/- X and Y directions; determining the coordinates of the sample; compensating for temperature effects; and verifying the accuracy of the measurements and repeating as necessary. SCAMM and FAMM are designed to be used in hot cells.

Hedglen, Robert E. (Bethel Park, PA); Jacket, Howard S. (Pittsburgh, PA); Schwartz, Allan I. (Turtle Creek, PA)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Commercial Lighting and LED Lighting Incentives  

Broader source: Energy.gov [DOE]

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

102

Automated nutrient analyses in seawater  

SciTech Connect (OSTI)

This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The three appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)

Whitledge, T.E.; Malloy, S.C.; Patton, C.J.; Wirick, C.D.

1981-02-01T23:59:59.000Z

103

Automated Demand Response and Commissioning  

SciTech Connect (OSTI)

This paper describes the results from the second season of research to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve the electric grid reliability and manage electricity costs. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. We refer to this as Auto-DR. The evaluation of the control and communications must be properly configured and pass through a set of test stages: Readiness, Approval, Price Client/Price Server Communication, Internet Gateway/Internet Relay Communication, Control of Equipment, and DR Shed Effectiveness. New commissioning tests are needed for such systems to improve connecting demand responsive building systems to the electric grid demand response systems.

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-04-01T23:59:59.000Z

104

Automating An Industrial Power Plant  

E-Print Network [OSTI]

powerhouse retrofit and automation project with installation of a Utilities Process Monitoring and Control System. Based,on limited operating data gathered to date, oa1cu lations indioate that the figures in Deere's initial study and analysis, as well... the installation of necessary instrumentation for data gathering and the implementation of utilities optimization strategies. The John Deere Component Works in Waterloo, Iowa, is a 4.3 million square-foot factory which produces transmissions, hydraulic...

Williams, D. R.; McCowen, R. R.

105

Lighting Renovations  

Broader source: Energy.gov [DOE]

When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

106

Cerenkov Light  

ScienceCinema (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2014-05-22T23:59:59.000Z

107

Cerenkov Light  

SciTech Connect (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2013-06-13T23:59:59.000Z

108

Integration of automation design information using XML technologies  

E-Print Network [OSTI]

Integration of automation design information using XML technologies Master of Science Thesis Mika UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION #12;2 Abstract TAMPERE UNIVERSITY OF TECHNOLOGY Automation Degree Program Institute of Automation and Control Viinikkala, Mika: Integration of automation design

109

The effects of level of automation and adaptive automation on human performance, situation awareness and workload in a  

E-Print Network [OSTI]

The effects of level of automation and adaptive automation on human performance, situation., 4731 East Forest Peak, Marietta, GA 30066, USA Keywords: Level of automation (LOA); adaptive automation of automation (LOAs) for maintaining operator involvement in complex systems control and facilitating situation

Kaber, David B.

110

Safety Analysis Of Automated Highway Systems  

E-Print Network [OSTI]

Lee. Towards an automated fmea assis- tant. In Applicationsmodes and effects analysis (FMEA) is employed to determineof multiple failures. ) FMEA was developed Potential Part

Leveson, Nancy G.

1997-01-01T23:59:59.000Z

111

Automating Datacenter Operations Using Machine Learning  

E-Print Network [OSTI]

4 Fingerprinting the Datacenter: Automated Classification of6.2.2 Trusting SML in Datacenter Operations . . . . . .in the datacenter under study. . . . . . . . . . . . . ROC

Bodik, Peter

2010-01-01T23:59:59.000Z

112

Architectures of Test Automation Copyright Cem Kaner, 2000. All rights reserved. 1 Architectures of Test Automation  

E-Print Network [OSTI]

Architectures of Test Automation Copyright © Cem Kaner, 2000. All rights reserved. 1 Architectures of Test Automation Copyright © August, 2000 Cem Kaner, kaner@kaner.com Acknowledgement Many of the ideas in this presentation were jointly developed with Doug Hoffman, in a course that we taught together on test automation

113

automated plate assay: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

114

automated endothelial keratoplasty: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

115

automated speed enforcement: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

116

automated quantitative nuclear: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

117

automated blood culture: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

118

automated sampling assessment: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

119

automated mounter enabling: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

120

automated personal dosimetry: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

automated checkin: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

122

automated edman degradation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

123

automated liquid handler: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

124

automated cytogenetic biodosimetry: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

125

automated endothelial keratoplastydsaek: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

126

automated liquid handlers: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

127

automated sample preparation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

128

automated affymetrix expression: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

129

automated pulmonary fissure: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

130

automated container terminal: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

131

automated peritoneal dialysis: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

132

automated nucleophilic 18ffluorination: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

133

automated pressure-controlled discography: Topics by E-print...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

134

automated radiometric technic: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

135

automated procalcitonin assay: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

136

automated dose dispensing: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

137

Open Automated Demand Response for Small Commerical Buildings  

SciTech Connect (OSTI)

This report characterizes small commercial buildings by market segments, systems and end-uses; develops a framework for identifying demand response (DR) enabling technologies and communication means; and reports on the design and development of a low-cost OpenADR enabling technology that delivers demand reductions as a percentage of the total predicted building peak electric demand. The results show that small offices, restaurants and retail buildings are the major contributors making up over one third of the small commercial peak demand. The majority of the small commercial buildings in California are located in southern inland areas and the central valley. Single-zone packaged units with manual and programmable thermostat controls make up the majority of heating ventilation and air conditioning (HVAC) systems for small commercial buildings with less than 200 kW peak electric demand. Fluorescent tubes with magnetic ballast and manual controls dominate this customer group's lighting systems. There are various ways, each with its pros and cons for a particular application, to communicate with these systems and three methods to enable automated DR in small commercial buildings using the Open Automated Demand Response (or OpenADR) communications infrastructure. Development of DR strategies must consider building characteristics, such as weather sensitivity and load variability, as well as system design (i.e. under-sizing, under-lighting, over-sizing, etc). Finally, field tests show that requesting demand reductions as a percentage of the total building predicted peak electric demand is feasible using the OpenADR infrastructure.

Dudley, June Han; Piette, Mary Ann; Koch, Ed; Hennage, Dan

2009-05-01T23:59:59.000Z

138

Automated fuel pin loading system  

DOE Patents [OSTI]

An automated loading system for nuclear reactor fuel elements utilizes a gravity feed conveyor which permits individual fuel pins to roll along a constrained path perpendicular to their respective lengths. The individual lengths of fuel cladding are directed onto movable transports, where they are aligned coaxially with the axes of associated handling equipment at appropriate production stations. Each fuel pin can be reciprocated axially and/or rotated about its axis as required during handling steps. The fuel pins are inserted as a batch prior to welding of end caps by one of two disclosed welding systems.

Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA); Steffen, Jim M. (Richland, WA)

1985-01-01T23:59:59.000Z

139

Automated mass spectrometer grows up  

SciTech Connect (OSTI)

In 1980 we reported the development of an automated mass spectrometer for large scale batches of samples enriched in nitrogen-15 as ammonium salts. Since that time significant technical progress has been made in the instrument. Perhaps more significantly, administrative and institutional changes have permitted the entire effort to be transferred to the private sector from its original base at the Los Alamos National Laboratory. This has ensured the continuance of a needed service to the international scientific community as revealed by a development project at a national laboratory, and is an excellent example of beneficial technology transfer to private industry.

McInteer, B.B.; Montoya, J.G.; Stark, E.E.

1984-01-01T23:59:59.000Z

140

Automated Transportation Management System (ATMS)  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: Scope ChangeL-01-06 AuditAugust 5,Re evised June 2010 Autom The

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

automated concise extraction: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Computer Science, Bar-Ilan University, Ramat-Gan 52900, Israel 4 Center for Automation Research, University of Maryland Plaza, Antonio J. 5 Automated Pointcut Extraction...

142

automated rna extraction: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Computer Science, Bar-Ilan University, Ramat-Gan 52900, Israel 4 Center for Automation Research, University of Maryland Plaza, Antonio J. 5 Automated Pointcut Extraction...

143

Inventors in Action: Composites and Automation | GE Global Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Composite Materials and Automation Inventors in Action: Composite Materials and Automation As our composite materials evolve, our manufacturing processes do too. A new class of...

144

An automated tool for three types of saturated hydraulic conductivity...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

automated tool for three types of saturated hydraulic conductivity laboratory measurements. An automated tool for three types of saturated hydraulic conductivity laboratory...

145

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network [OSTI]

Goodin. 2009. “Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. ” InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

146

Results and commissioning issues from an automated demand response pilot  

E-Print Network [OSTI]

of Fully Automated Demand Response in Large Facilities"Management and Demand Response in Commercial Buildings", L Band Commissioning Issues from an Automated Demand Response.

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

147

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network [OSTI]

and Techniques for Demand Response. May 2007. LBNL-59975.to facilitate automating  demand response actions at the Interoperable Automated Demand Response Infrastructure,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

148

SciTech Connect: Multiplex automated genome engineering  

Office of Scientific and Technical Information (OSTI)

Multiplex automated genome engineering Citation Details In-Document Search Title: Multiplex automated genome engineering You are accessing a document from the Department of...

149

automated guideway transit: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated Data Collection Systems, such as Automated Fare Collection (AFC) and Automatic Vehicle Location (AVL), provides ... Schil, Mickal (Mickal Ren Jerme) 2012-01-01...

150

automated words stability: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Coach that Listens: Automated Detection Mostow, Jack 38 Model-driven Automated Software FMEA Neal Snooke, PhD, Aberystwyth University Computer Technologies and Information Sciences...

151

automated motif analysis: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Approach to Sensor Selection- prehensive automated Failure Modes and Effects Analysis (FMEA) using qualitative model based reasoning au- tonomous aircraft. Automated failure mode...

152

analysis automated perimetry: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Approach to Sensor Selection- prehensive automated Failure Modes and Effects Analysis (FMEA) using qualitative model based reasoning au- tonomous aircraft. Automated failure mode...

153

automated risk analysis: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Approach to Sensor Selection- prehensive automated Failure Modes and Effects Analysis (FMEA) using qualitative model based reasoning au- tonomous aircraft. Automated failure mode...

154

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Broader source: Energy.gov (indexed) [DOE]

IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation...

155

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Broader source: Energy.gov (indexed) [DOE]

Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper...

156

Small- and Medium-Size Building Automation and Control System...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Emerging...

157

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

158

Highly Insulating Residential Windows Using Smart Automated Shading...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Highly Insulating Residential Windows Using Smart Automated Shading Highly Insulating Residential Windows Using Smart Automated Shading Addthis 1 of 3 Residential Smart Window with...

159

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network [OSTI]

Keywords: demand response, buildings, electricity use, Interface  Automated Demand Response  Building Automation of demand response in  commercial buildings.   One key 

Piette, Mary Ann

2009-01-01T23:59:59.000Z

160

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network [OSTI]

Demand  Response for Small Commercial Buildings.   CEC?500?automated demand response  For small commercial buildings, AUTOMATED DEMAND RESPONSE FOR SMALL COMMERCIAL BUILDINGS

Dudley, June Han

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Automated Eye-Movement Protocol Analysis  

E-Print Network [OSTI]

Automated Eye-Movement Protocol Analysis Dario D. Salvucci and John R. Anderson Carnegie Mellon analysis of eye-movement protocols. Although eye movements have be- come increasingly popular as a tool an ap- proach to automating eye-movement protocol analysis by means of tracing--re- lating observed eye

Salvucci, Dario D.

162

Automated Operating Procedures for Transfer Limits  

E-Print Network [OSTI]

Automated Operating Procedures for Transfer Limits Final Project Report Power Systems Engineering · Illinois · Iowa State · Texas A&M · Washington State · Wisconsin Automated Operating Procedures operating procedures to establish system constraints, particularly in regards to transfer limits across

163

Atlas Sodium Automated Batch Synthesis System  

E-Print Network [OSTI]

Atlas Sodium Automated Batch Synthesis System (Syrris) June 2013 #12;Introduction to the system · The Atlas Sodium system consists of an Atlas base equipped with a 400ºC hotplate, a stacking dry bath systemL) for automated addition and/or removal of solution. · The system is computer controlled by the Atlas software

Subramanian, Venkat

164

Automated ConstraintBased Nucleotide Sequence Selection  

E-Print Network [OSTI]

Automated Constraint­Based Nucleotide Sequence Selection for DNA Computation Alexander J. Hartemink computational melting temper­ ature primitive to search a ``nucleotide space'' for sequences satisfying a pre that offer the promise of an efficient method for selecting optimal nucleotide sequences in an automated

Gifford, David K.

165

Automated Constraint-Based Nucleotide Sequence Selection  

E-Print Network [OSTI]

Automated Constraint-Based Nucleotide Sequence Selection for DNA Computation Alexander J. Hartemink computational melting temperature primitive to search a "nucleotide space" for sequences satisfying a pre that offer the promise of an efficient method for selecting optimal nucleotide sequences in an automated

Gifford, David K.

166

Demand Response and Open Automated Demand Response  

E-Print Network [OSTI]

LBNL-3047E Demand Response and Open Automated Demand Response Opportunities for Data Centers G described in this report was coordinated by the Demand Response Research Center and funded by the California. Demand Response and Open Automated Demand Response Opportunities for Data Centers. California Energy

167

Chapter VIII Automated Overlay of Infrared  

E-Print Network [OSTI]

166 Chapter VIII Automated Overlay of Infrared and Visual Medical Images G. Schaefer Aston written permission of IGI Global is prohibited. AbstrAct Medical infrared imaging captures the temperature a useful diagnostic visualisation for the clinician. #12;167 Automated Overlay of Infrared and Visual

Hopgood, Adrian

168

Technical University of Denmark rsted DTU Automation  

E-Print Network [OSTI]

Technical University of Denmark �rsted · DTU Automation Project: SICAM - SIngle Conversion stage;Isolated PDM and PWM DC-AC SICAMs Petar Ljusev, MSc., Ph.D. student, �rsted · DTU Automation e-mail: pl

169

D Riso-R-429 Automated Uranium  

E-Print Network [OSTI]

routinely used analytical techniques for uranium determina- tions in geological samples, fissionCM i D Riso-R-429 Automated Uranium Analysis by Delayed-Neutron Counting H. Kunzendorf, L. Løvborg AUTOMATED URANIUM ANALYSIS BY DELAYED-NEUTRON COUNTING H. Kunzendorf, L. Løvborg and E.M. Christiansen

170

Development and evaluation of an automated reflectance microscope system for the petrographic characterization of bituminous coals  

SciTech Connect (OSTI)

The development of automated coal petrographic techniques will lessen the demands on skilled personnel to do routine work. This project is concerned with the development and successful testing of an instrument which will meet these needs. The fundamental differences in reflectance of the three primary maceral groups should enable their differentiation in an automated-reflectance frequency histogram (reflectogram). Consequently, reflected light photometry was chosen as the method for automating coal petrographic analysis. Three generations of an automated system (called Rapid Scan Versions I, II and III) were developed and evaluated for petrographic analysis. Their basic design was that of a reflected-light microscope photometer with an automatic stage, interfaced with a minicomputer. The hardware elements used in the Rapid Scan Version I limited the system's flexibility and presented problems with signal digitization and measurement precision. Rapid Scan Version II was designed to incorporate a new microscope photometer and computer system. A digital stepping stage was incorporated into the Rapid Scan Version III system. The precision of reflectance determination of this system was found to be +- 0.02 percent reflectance. The limiting factor in quantitative interpretation of Rapid Scan reflectograms is the resolution of reflectance populations of the individual maceral groups. Statistical testing indicated that reflectograms were highly reproducible, and a new computer program, PETAN, was written to interpret the curves for vitrinite reflectance parameters ad petrographic.

Hoover, D. S.; Davis, A.

1980-10-01T23:59:59.000Z

171

Automated Continuous Commissioning of Commercial Buildings  

E-Print Network [OSTI]

score Figure 43 Lighting faults Comparison of the total84 Figure 45 Comparison of lighting power consumption (left)2011 Figure 45 Comparison of lighting power consumption (

Bailey, Trevor

2013-01-01T23:59:59.000Z

172

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

SciTech Connect (OSTI)

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

173

Automated Fresnel lens tester system  

SciTech Connect (OSTI)

An automated data collection system controlled by a desktop computer has been developed for testing Fresnel concentrators (lenses) intended for solar energy applications. The system maps the two-dimensional irradiance pattern (image) formed in a plane parallel to the lens, whereas the lens and detector assembly track the sun. A point detector silicon diode (0.5-mm-dia active area) measures the irradiance at each point of an operator-defined rectilinear grid of data positions. Comparison with a second detector measuring solar insolation levels results in solar concentration ratios over the image plane. Summation of image plane energies allows calculation of lens efficiencies for various solar cell sizes. Various graphical plots of concentration ratio data help to visualize energy distribution patterns.

Phipps, G.S.

1981-07-01T23:59:59.000Z

174

AUTOMATIC MAPPING FROM ULTRA-LIGHT UAV IMAGERY Christoph Strecha a,b  

E-Print Network [OSTI]

AUTOMATIC MAPPING FROM ULTRA-LIGHT UAV IMAGERY Christoph Strecha a,b , Olivier Küng a,b and Pascal.kueng@pix4d.com) KEY WORDS: UAV, mapping, ortho-image, DSM, Structure and Motion ABSTRACT: This paper presents an affordable, fully automated and accurate mapping solutions based on ultra-light UAV imagery

Fua, Pascal

175

Human-Automation Interaction By Thomas B. Sheridan & Raja Parasuraman  

E-Print Network [OSTI]

89 CHAPTER 2 Human-Automation Interaction By Thomas B. Sheridan & Raja Parasuraman Automation does with automation in complex and typically large-scale systems, including aircraft and air traffic control, nuclear-free task for either the system designer or the human operator/automation supervisor, especially as computer

Parasuraman, Raja

176

A SIP-based Home Automation Platform: an Experimental Study  

E-Print Network [OSTI]

A SIP-based Home Automation Platform: an Experimental Study Benjamin Bertran, Charles Consel INRIA automation applications that consist of heterogeneous, distributed entities. We describe how SIP fulfills the requirements of home automation; we present the resulting architecture of a home automation system; and, we

Boyer, Edmond

177

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)  

SciTech Connect (OSTI)

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

Harrison, K.

2014-01-01T23:59:59.000Z

178

Light Computing  

E-Print Network [OSTI]

A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

Gordon Chalmers

2006-10-13T23:59:59.000Z

179

Low Speed Automation, a French Initiative  

E-Print Network [OSTI]

MIPS, 2 rue des frères Lumière,68093 Mulhouse-FRANCE Nowadays, vehicle safety is constantly increasing thanks to the improvement of vehicle passive and active safety. However, on a daily usage of the car, traffic jams remains a problem. With limited space for road infrastructure, automation of the driving task on specific situation seems to be a possible solution. The French project ABV, which stands for low speed automation, tries to demonstrate the feasibility of the concept and to prove the benefits. In this article, we describe the scientific background of the project and expected outputs. "Keywords: vehicle automation, shared control, environment sensing, data fusion;" 1.

Sébastien Glaser; Maurice Cour; Lydie Nouveliere; Alain Lambert; Fawzi Nashashibi; Jean-christophe Popieul; Benjamin Mourllion

180

Automated Data Quality Analysis Research and Development  

E-Print Network [OSTI]

ESL-TR-02/02-01 Automated Data Quality Analysis Research and Development LoanSTAR Deliverable Report Final Report James Sweeney, Jr. Jeff S. Haberl, Ph.D., P.E. February 2002 p. 1 PREFACE This report is one of a series of reports that documents... represents the LoanSTAR and Technical Assistance deliverable Task D, number four, "Automated the Data Analysis/Quality Verification Process to 'Exception Only' (ESL internal)". This work reports on the Automated Data Quality process development. This process...

Sweeney, J., Jr.; Haberl, J. S.

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Automated Vehicle Policy Work Automated vehicles are a subject of great interest, both in transportation and society in general.  

E-Print Network [OSTI]

Automated Vehicle Policy Work Automated vehicles are a subject of great interest, both researchers are currently exploring automation's effects on the transportation system, determining preparation in the estimations of how automation will affect both congestion and safety. Both of these issues are critical

182

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network [OSTI]

Figure 2. Demand Response Automation Server and BuildingDemand Response Control Strategies in Commercial Buildings,X X Example of Demand Response from an Office Building This

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

183

Automation, Energy Conservation and Common Sense  

E-Print Network [OSTI]

and contains 5 million square feet of administration office and research laboratory space. An Engineering study to investigate an automated computer controlled energy management system has been completed. The study objectives were to identify system parameters...

Hester, D.

1981-01-01T23:59:59.000Z

184

Sensors and Automated Analyzers for Radionuclides  

SciTech Connect (OSTI)

The production of nuclear weapons materials has generated large quantities of nuclear waste and significant environmental contamination. We have developed new, rapid, automated methods for determination of radionuclides using sequential injection methodologies to automate extraction chromatographic separations, with on-line flow-through scintillation counting for real time detection. This work has progressed in two main areas: radionuclide sensors for water monitoring and automated radiochemical analyzers for monitoring nuclear waste processing operations. Radionuclide sensors have been developed that collect and concentrate radionuclides in preconcentrating minicolumns with dual functionality: chemical selectivity for radionuclide capture and scintillation for signal output. These sensors can detect pertechnetate to below regulatory levels and have been engineered into a prototype for field testing. A fully automated process monitor has been developed for total technetium in nuclear waste streams. This instrument performs sample acidification, speciation adjustment, separation and detection in fifteen minutes or less.

Grate, Jay W.; Egorov, Oleg B.

2003-03-27T23:59:59.000Z

185

Automated intrusion recovery for web applications  

E-Print Network [OSTI]

In this dissertation, we develop recovery techniques for web applications and demonstrate that automated recovery from intrusions and user mistakes is practical as well as effective. Web applications play a critical role ...

Chandra, Ramesh, Ph. D. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

186

Preface: Cognitive Engineering in Automated Systems Design  

E-Print Network [OSTI]

Preface: Cognitive Engineering in Automated Systems Design This special issue was motivated by an apparent paucity of research on applications of cognitive engineering principles in the design of complex systems including mainte- nance, manufacturing, and transportation systems. Cognitive engineering

Kaber, David B.

187

AUTOMATED, HIGHLY ACCURATE VERIFICATION OF RELAP5-3D  

SciTech Connect (OSTI)

Computer programs that analyze light water reactor safety solve complex systems of governing, closure and special process equations to model the underlying physics. In addition, these programs incorporate many other features and are quite large. RELAP5-3D[1] has over 300,000 lines of coding for physics, input, output, data management, user-interaction, and post-processing. For software quality assurance, the code must be verified and validated before being released to users. Verification ensures that a program is built right by checking that it meets its design specifications. Recently, there has been an increased importance on the development of automated verification processes that compare coding against its documented algorithms and equations and compares its calculations against analytical solutions and the method of manufactured solutions[2]. For the first time, the ability exists to ensure that the data transfer operations associated with timestep advancement/repeating and writing/reading a solution to a file have no unintended consequences. To ensure that the code performs as intended over its extensive list of applications, an automated and highly accurate verification method has been modified and applied to RELAP5-3D. Furthermore, mathematical analysis of the adequacy of the checks used in the comparisons is provided.

George L Mesina; David Aumiller; Francis Buschman

2014-07-01T23:59:59.000Z

188

NAVIGATION SOFTWARE OF AUTOMATED GUIDED VEHICLE  

E-Print Network [OSTI]

Abstract: In the article it has been presented the structure of the control system and measurement data processing of an automated guided vehicle. The basic navigation technique – odometry, which is applied in the automated guided vehicle, has been described, as well as connected with it errors of position tracing. Next the navigation software was shown which enables to design the trajectory of the vehicle movement as well as the registration and reading of the measurement data from the measurement sensors.

Magdalena Dobrza?ska; Pawe? Dobrza?ski

189

Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards  

E-Print Network [OSTI]

to  Automated  Demand   Response  and  the  OpenADR  ®  Automated  Demand  Response  Program.   https://Data  for  Automated  Demand  Response  in  Commercial  

Ghatikar, Girish

2014-01-01T23:59:59.000Z

190

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network [OSTI]

for Automated Demand Response in Commercial Buildings. ” In2010. “Open Automated Demand Response Dynamic Pricing2009. “Open Automated Demand Response Communications

Ghatikar, Girish

2010-01-01T23:59:59.000Z

191

An Interface Between Continuous And Discrete-event Controllers For Vehicle Automation  

E-Print Network [OSTI]

Event Controllers for Vehicle Automation John Lygeros DattaEvent Controllers for Vehicle Automation John Lygeros andTomizuka, Vehicle lateral control for highway automation,"

Lygeros, John; Godbole, Datta N.

1994-01-01T23:59:59.000Z

192

Explorations of Space-Charge Limits in Parallel-Plate Diodes and Associated Techniques for Automation  

E-Print Network [OSTI]

and Associated Techniques for Automation by Benjamin Ragan-and Associated Techniques for Automation Copyright 2013 byand Associated Techniques for Automation by Benjamin Ragan-

Ragan-Kelley, Benjamin

2013-01-01T23:59:59.000Z

193

Demonstration of Datacenter Automation Software and Hardware (DASH) at the California Franchise Tax Board  

E-Print Network [OSTI]

of Datacenter Automation Software and Hardware (DASH) at theof Datacenter Automation Software and Hardware (DASH) at theprotocol for building automation and control networks. It is

Bell, Geoffrey C.

2010-01-01T23:59:59.000Z

194

E-Print Network 3.0 - automated synthesis module Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Towards Highly Automated Driving: Intermediate... of HAVEit is to develop and investigate vehicle automation beyond ADAS systems, especially highly automated... driving, where the...

195

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network [OSTI]

for Automated Demand Response in Commercial Buildings. ” InAutomated Demand Response for Small Commercial Buildings. ”in automated demand response programs with building control

Ghatikar, Girish

2010-01-01T23:59:59.000Z

196

Lighting Inventory Lighting Theatre and Drama  

E-Print Network [OSTI]

Lighting Inventory Lighting Theatre and Drama Description Totals R.Halls Wells- Metz Light ERS ETC SourceFour 25 25 50 degree ERS Strand Lighting 64 14 24 12 14 36 degree ERS ETC Source Four 15 15 36 degree ERS Strand Lighting 124 60 58 2 4 26 degree ERS ETC SourceFour 2 2 26 degree ERS Strand

Indiana University

197

Northwest Open Automated Demand Response Technology Demonstration Project  

SciTech Connect (OSTI)

The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also provides ancillary services within its own balancing authority. The relationship between BPA and SCL creates a unique opportunity to create DR programs that address both BPA's and SCL's markets simultaneously. Although simultaneously addressing both market could significantly increase the value of DR programs for BPA, SCL, and the end user, establishing program parameters that maximize this value is challenging because of complex contractual arrangements and the absence of a central Independent System Operator or Regional Transmission Organization in the northwest.

Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

2010-03-17T23:59:59.000Z

198

Automating Pen and InkAutomating Pen and Ink Landscape RenderingsLandscape Renderings  

E-Print Network [OSTI]

Automating Pen and InkAutomating Pen and Ink Landscape RenderingsLandscape Renderings Jim Mower geology They employThey employ ­­ Large scale viewsLarge scale views ­­ Pen and ink renderingsPen and ink renderings #12;ArminArmin LobeckLobeck LobeckLobeck wrote a wonderful book onwrote a wonderful book on block

Mower, James E.

199

Light Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLife a Light

200

Light' Darkness  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLifeLight to

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Residential Lighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared atEffectquestionnairesU.S. EnergyEnergy EfficiencyLighting

202

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 Light Water Reactor Sustainability Program ACCOMPLISHMENTS REPORT 2013 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

203

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 Light Water Reactor Sustainability ACCOMPLISHMENTS REPORT 2014 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

204

Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings  

SciTech Connect (OSTI)

California is a leader in automating demand response (DR) to promote low-cost, consistent, and predictable electric grid management tools. Over 250 commercial and industrial facilities in California participate in fully-automated programs providing over 60 MW of peak DR savings. This paper presents a summary of Open Automated DR (OpenADR) implementation by each of the investor-owned utilities in California. It provides a summary of participation, DR strategies and incentives. Commercial buildings can reduce peak demand from 5 to 15percent with an average of 13percent. Industrial facilities shed much higher loads. For buildings with multi-year savings we evaluate their load variability and shed variability. We provide a summary of control strategies deployed, along with costs to install automation. We report on how the electric DR control strategies perform over many years of events. We benchmark the peak demand of this sample of buildings against their past baselines to understand the differences in building performance over the years. This is done with peak demand intensities and load factors. The paper also describes the importance of these data in helping to understand possible techniques to reach net zero energy using peak day dynamic control capabilities in commercial buildings. We present an example in which the electric load shape changed as a result of a lighting retrofit.

Kiliccote, Sila; Piette, Mary Ann; Mathieu, Johanna; Parrish, Kristen

2010-05-14T23:59:59.000Z

205

Automation cueing modulates cerebral blood flow and vigilance in a simulated air traffic control task  

E-Print Network [OSTI]

Automation cueing modulates cerebral blood flow and vigilance in a simulated air traffic control: Automation; vigilance; cerebral blood flow; mental workload; attentional resources. Automation cueing operator, depending on automation reliability. To assess these effects, transcranial Doppler sonography

Parasuraman, Raja

206

Automated Battery Swap and Recharge to Enable Persistent UAV Missions  

E-Print Network [OSTI]

This paper introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a bu er of 8 batteries in a novel dual-drum structure that enables a "hot" battery ...

Toksoz, Tuna

207

Automated Demand Response Strategies and Commissioning Commercial Building Controls  

E-Print Network [OSTI]

4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

208

automated materials discrimination: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

automated materials discrimination First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Automated...

209

automated magnetometry based: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Behera, R; Poornima,; Dasgupta, K 2014-01-01 47 An Ontology-based Model to Determine the Automation Level of an Automated Vehicle for Physics Websites Summary: towards full...

210

automated nmr determination: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pre-existing XPLOR program Clore, G. Marius 29 An Ontology-based Model to Determine the Automation Level of an Automated Vehicle for Physics Websites Summary: towards full...

211

Analysis of Open Automated Demand Response Deployments in California  

E-Print Network [OSTI]

LBNL-6560E Analysis of Open Automated Demand Response Deployments in California and Guidelines The work described in this report was coordinated by the Demand Response Research. #12; #12;Abstract This report reviews the Open Automated Demand Response

212

The value of accurate automated data collection to manufacturing  

E-Print Network [OSTI]

The purpose of this thesis is to demonstrate the value of implementing a novel, accurate automated data collection system and to describe a practical method for doing so. This thesis addresses the value of accurate automated ...

Perez, Alfonso Alexander

2014-01-01T23:59:59.000Z

213

Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Spring 2011 Nanoparticle Reactor Automation Overview would be fully automated and able to run overnight. The team was also asked to keep the solutions from

Demirel, Melik C.

214

Sustainable Office Lighting Options  

E-Print Network [OSTI]

Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

Massachusetts at Amherst, University of

215

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network [OSTI]

January 2008. Biography Mary Ann Piette is a Staff ScientistAutomated Demand Response Mary Ann Piette, Sila Kiliccote,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

216

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network [OSTI]

Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

Kiliccote, Sila

2010-01-01T23:59:59.000Z

217

automated software engineering: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Genomic Engineering (SAGE) Enabled by Electrowetting-on-Dielectric Digital Microfluidics Materials Science Websites Summary: Software Automated Genomic Engineering (SAGE)...

218

Rseaux d'automates stochastiques temps discret  

E-Print Network [OSTI]

façon compacte et struc- turée. Par exemple, les réseaux d'automates stochastiques (SAN) [PLA 84, FER 98 de calculer des indices de performances [KEM 96, BUC 00, CIA 99, PLA 91]. Le formalisme des réseaux d'automates stochastiques (SAN) à temps continu a déjà été largement développé depuis une vingtaine d'années [PLA 84, PLA 91

Benoit, Anne

219

Solid State Lighting Program (Falcon)  

SciTech Connect (OSTI)

Over the past two years, KLA-Tencor and partners successfully developed and deployed software and hardware tools that increase product yield for High Brightness LED (HBLED) manufacturing and reduce product development and factory ramp times. This report summarizes our development effort and details of how the results of the Solid State Light Program (Falcon) have started to help HBLED manufacturers optimize process control by enabling them to flag and correct identified killer defect conditions at any point of origin in the process manufacturing flow. This constitutes a quantum leap in yield management over current practice. Current practice consists of die dispositioning which is just rejection of bad die at end of process based upon probe tests, loosely assisted by optical in-line monitoring for gross process deficiencies. For the first time, and as a result of our Solid State Lighting Program, our LED manufacturing partners have obtained the software and hardware tools that optimize individual process steps to control killer defects at the point in the processes where they originate. Products developed during our two year program enable optimized inspection strategies for many product lines to minimize cost and maximize yield. The Solid State Lighting Program was structured in three phases: i) the development of advanced imaging modes that achieve clear separation between LED defect types, improves signal to noise and scan rates, and minimizes nuisance defects for both front end and back end inspection tools, ii) the creation of defect source analysis (DSA) software that connect the defect maps from back-end and front-end HBLED manufacturing tools to permit the automatic overlay and traceability of defects between tools and process steps, suppress nuisance defects, and identify the origin of killer defects with process step and conditions, and iii) working with partners (Philips Lumileds) on product wafers, obtain a detailed statistical correlation of automated defect and DSA map overlay to failed die identified using end product probe test results. Results from our two year effort have led to “automated end-to-end defect detection” with full defect traceability and the ability to unambiguously correlate device killer defects to optically detected features and their point of origin within the process. Success of the program can be measured by yield improvements at our partner’s facilities and new product orders.

Meeks, Steven

2012-06-30T23:59:59.000Z

220

How to Make Ad Hoc Proof Automation Less Ad Hoc  

E-Print Network [OSTI]

How to Make Ad Hoc Proof Automation Less Ad Hoc Georges Gonthier1 Beta Ziliani2 Aleks Nanevski3 Software Institute, Madrid ICFP 2011, Tokyo #12;Why proof automation at ICFP? Ad hoc polymorphism Overloading terms Ad hoc proof automation Overloading lemmas "How to make ad hoc polymorphism less ad hoc

Dreyer, Derek

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Interdisciplinary Research Experiences in Mechatronics, Robotics, and Automated System Design  

E-Print Network [OSTI]

Interdisciplinary Research Experiences in Mechatronics, Robotics, and Automated System Design Texas for undergraduate students to learn about mechatronics, robotics, and automated system design. Program objectives in research and interest in a career in mechatronics, robotics or automated system design, as evidenced

222

Vehicle Following Control Design for Automated Highway Systems  

E-Print Network [OSTI]

Vehicle Following Control Design for Automated Highway Systems H. Raza and P. Ioannou A, utomatic vehicle following isan important feature of a fully rpartially automated highwaysystem (AHS is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal

Ioannou, Petros

223

A Loop Material Flow System Design for Automated Guided Vehicles  

E-Print Network [OSTI]

A Loop Material Flow System Design for Automated Guided Vehicles Ardavan Asef-Vaziri 1 Maged load automated guided vehicles. The model simultaneously determines both the design are attributed to material handling (Tompkins et al., 1996). Automated guided vehicles (AGVs) are among

Dessouky, Maged

224

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns  

E-Print Network [OSTI]

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns Edwin O in an environment can be mined to discover significant patterns, which an intelligent agent could use to automate of two prediction algorithms, thus demonstrating multiple uses for a home automation system. Finally, we

Cook, Diane J.

225

The Automation of Sound Reasoning and Successful Proof Finding  

E-Print Network [OSTI]

709 44 The Automation of Sound Reasoning and Successful Proof Finding LARRY WOS AND BRANDEN scientist naturally envisioned the automation of sound rea- soning ­ reasoning in which conclusions, and find proofs. But can such logical reasoning be fully automated? Can a single computer program

Fitelson, Branden

226

Modular and Generic Control Software System for Scalable Automation  

E-Print Network [OSTI]

Modular and Generic Control Software System for Scalable Automation Christian Brecher, Martin.freundt@ipt.fraunhofer.de Abstract. The development of automated production systems is subdivided in two mayor tasks. One production with a high rate of changes, this is why fully automated solutions don't pay off and manual

Paris-Sud XI, Université de

227

Trust Model for Security Automation Data 1.0 (TMSAD)  

E-Print Network [OSTI]

Trust Model for Security Automation Data 1.0 (TMSAD) HaroldBooth AdamHalbardier NIST Interagency Report 7802 #12;NIST Interagency Report 7802 Trust Model for Security Automation Data 1.0 (TMSAD) Harold FOR SECURITY AUTOMATION DATA 1.0 (TMSAD) iii Reports on Computer Systems Technology The Information Technology

228

TEMPORAL PERFORMANCE EVALUATION OF CONTROL ARCHITECTURE IN AUTOMATION  

E-Print Network [OSTI]

TEMPORAL PERFORMANCE EVALUATION OF CONTROL ARCHITECTURE IN AUTOMATION SYSTEMS Pascal Meunier, Bruno, France pascal.meunier@lurpa.ens-cachan.fr (Pascal Meunier) Abstract The performances of automation performances of networked automation system and which guides the engineer throughout the control architecture

Paris-Sud XI, Université de

229

Security Automation Developer Days March 22-25, 2011  

E-Print Network [OSTI]

Security Automation Developer Days March 22-25, 2011 Portrait Room The National Institute Reporting Format (ARF) efforts. 1:00 ­ 2:50 Adv. Tailoring and Automated Profile Selection Charles Schmidt tailoring procedures, and structures that could support automated selection of profiles. This discussion

Magee, Joseph W.

230

Designing Automation to Reduce Operator Errors Nancy G. Leveson  

E-Print Network [OSTI]

Designing Automation to Reduce Operator Errors Nancy G. Leveson Computer Science and Engineering University of Washington Everett Palmer NASA Ames Research Center Introduction Advanced automation has been of mode­related problems [SW95]. After studying accidents and incidents in the new, highly automated

Leveson, Nancy

231

Density Functional Theory-Based Database Development and CALPHAD Automation  

E-Print Network [OSTI]

Density Functional Theory-Based Database Development and CALPHAD Automation YI WANG,1,2 SHUNLI, the integration of first-principles calculations, CALPHAD modeling, and the automation of phase diagram, and the automated calculation of a phase diagram for the Al- Mg system. INTRODUCTION In thermodynamics, a phase

Chen, Long-Qing

232

http://jla.sagepub.com/ Journal of Laboratory Automation  

E-Print Network [OSTI]

http://jla.sagepub.com/ Journal of Laboratory Automation http://jla.sagepub.com/content/early/2012 2012Journal of Laboratory Automation Timothy J. Bunning and Tony Jun Huang Yan Jun Liu, Mengqian Lu://www.sagepublications.com On behalf of: Society for Laboratory Automation and Screening can be found at:Journal of Laboratory

Demirel, Melik C.

233

IT/Automation Cost Reduction in Intel's Manufacturing Environment  

E-Print Network [OSTI]

IT/Automation Cost Reduction in Intel's Manufacturing Environment Brian Subirana subirana@mit.edu MIT Center for Coordination Science WP #222 July 2003 #12;IT/Automation Cost Reduction in Intel maintaining existing service levels. "We want you to reduce automation costs by 50% while maintaining equal

234

INTRODUCTION Recent research on human-automation inter-  

E-Print Network [OSTI]

INTRODUCTION Recent research on human-automation inter- action theory (Endsley & Kaber, 1999 decisions about what complex system functions to automate, and to what extent, in advance of implementation and as part of the systems de- sign process. This work has relevance to adap- tive automation. Adaptive

Kaber, David B.

235

Home Automation in the Wild: Challenges and Opportunities  

E-Print Network [OSTI]

Home Automation in the Wild: Challenges and Opportunities A.J. Bernheim Brush, Bongshin Lee, Ratul enabling home automation. However, these technologies have not been widely adopted despite being available visits to 14 households with home automation. The long term experience, both positive and negative

Rajamani, Sriram K.

236

Scope and Description Laboratory Robotics and Automation seeks to  

E-Print Network [OSTI]

#12;Scope and Description Laboratory Robotics and Automation seeks to communicate developments and information about the automation of the laboratory. Application areas generally include analytical peripherals, and other robotics developments that may have an impact on laboratory automation. In the area

Kostic, Milivoje M.

237

System Performances under Automation Degradation E. Hollnagel3  

E-Print Network [OSTI]

System Performances under Automation Degradation (SPAD) E. Hollnagel3 , C. Martinie1 , P. Palanque1 of the project objectives augmented by some early findings. Abstract - Increased automation is one of the main changes foreseen by SESAR in ATM. This will pose new challenges including possible automation degradation

Boyer, Edmond

238

EMBEDDED SW DESIGN SPACE EXPLORATION AND AUTOMATION USING  

E-Print Network [OSTI]

EMBEDDED SW DESIGN SPACE EXPLORATION AND AUTOMATION USING UML-BASED TOOLS FLÁVIO R. WAGNER, carro}@inf.ufrgs.br Abstract: This tutorial discusses design space exploration and software automation based on an UML front-end. First, we review software automation tools targeted at the embedded systems

Wagner, Flávio Rech

239

Automated FMEA based diagnostic symptom generation. Neal Snooke1,  

E-Print Network [OSTI]

Automated FMEA based diagnostic symptom generation. Neal Snooke1, , Chris Price Department the model based simulation used to produce an automated Failure Modes and Effect Analysis (FMEA to automate the production of a FMEA report, and the paper also considers the relationship between FMEA

Snooke, Neal

240

Salsbury and Diamond: Automated Testing of HVAC Systems for Commissioning -1 -Automated Testing of HVAC Systems for Commissioning  

E-Print Network [OSTI]

and Diamond: Automated Testing of HVAC Systems for Commissioning - 1 - Automated Testing of HVAC Systems This paper describes an approach to the automation of the commissioning of HVAC systems. The approach of many HVAC systems is limited more by poor installation, commissioning, and maintenance than by poor

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

IEEE Robotics and Automation Society announces a new Publication: The IEEE Transactions on Automation Science and Engineering (T-ASE)  

E-Print Network [OSTI]

IEEE Robotics and Automation Society announces a new Publication: The IEEE Transactions on Automation Science and Engineering (T-ASE) February 2003: First Issue to appear in mid 2004. Executive Summary Automation plays an increasingly important role in the global economy and in our daily lives

O'Brien, James F.

242

Apparatus for automated testing of biological specimens  

DOE Patents [OSTI]

An apparatus for performing automated testing of infections biological specimens is disclosed. The apparatus comprise a process controller for translating user commands into test instrument suite commands, and a test instrument suite comprising a means to treat the specimen to manifest an observable result, and a detector for measuring the observable result to generate specimen test results.

Layne, Scott P. (Los Angeles, CA); Beugelsdijk, Tony J. (Los Alamos, NM)

1999-01-01T23:59:59.000Z

243

Viability of Modern Automated Rapid Transit Applications  

E-Print Network [OSTI]

guideway: elevated, underground, at grade · Fully automated: electric-powered, electronic controls · Non · Headways/frequency: about 30 seconds/120 veh/hr · Small vehicles: 4-6 passengers, low weight · Eco: 4 km, 21 vehicles, two stations (parking and terminal) · Open to public service Spring 2011, 22

Minnesota, University of

244

Incremental learning for automated knowledge capture.  

SciTech Connect (OSTI)

People responding to high-consequence national-security situations need tools to help them make the right decision quickly. The dynamic, time-critical, and ever-changing nature of these situations, especially those involving an adversary, require models of decision support that can dynamically react as a situation unfolds and changes. Automated knowledge capture is a key part of creating individualized models of decision making in many situations because it has been demonstrated as a very robust way to populate computational models of cognition. However, existing automated knowledge capture techniques only populate a knowledge model with data prior to its use, after which the knowledge model is static and unchanging. In contrast, humans, including our national-security adversaries, continually learn, adapt, and create new knowledge as they make decisions and witness their effect. This artificial dichotomy between creation and use exists because the majority of automated knowledge capture techniques are based on traditional batch machine-learning and statistical algorithms. These algorithms are primarily designed to optimize the accuracy of their predictions and only secondarily, if at all, concerned with issues such as speed, memory use, or ability to be incrementally updated. Thus, when new data arrives, batch algorithms used for automated knowledge capture currently require significant recomputation, frequently from scratch, which makes them ill suited for use in dynamic, timecritical, high-consequence decision making environments. In this work we seek to explore and expand upon the capabilities of dynamic, incremental models that can adapt to an ever-changing feature space.

Benz, Zachary O.; Basilico, Justin Derrick; Davis, Warren Leon,; Dixon, Kevin R.; Jones, Brian S.; Martin, Nathaniel; Wendt, Jeremy Daniel

2013-12-01T23:59:59.000Z

245

Trust Calibration for Automated Decision Aids  

E-Print Network [OSTI]

, command and control systems, screening technologies, and biometric identification systems. All in a system is poorly calibrated. "Calibration" is a term used to describe the process by which automated Given the variety of complex situations that arise in the context of homeland security where uncertainty

McShea, Daniel W.

246

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING  

E-Print Network [OSTI]

AUTOMATED PLANNING FOR HYDROTHERMAL VENT PROSPECTING USING AUVS by ZEYN A SAIGOL A thesis submitted of searching the ocean floor for hydrothermal vents, using autonomous underwater vehicles (AUVs process (POMDP), but with a very large state space (of the order of 10123 states). This size of problem

Yao, Xin

247

Automated Fuel Dispensing System Form Instructions  

E-Print Network [OSTI]

Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

Fernandez, Eduardo

248

System information database: an automated maintenance aid  

SciTech Connect (OSTI)

This paper is a case study of how one DP organization applied student labor and a relational DBMS in a prototyping environment to automate much of their applications systems documentation function. The capabilities, fringe benefits and future enhancements of the tool are discussed.

Brice, L.; Connell, J.

1984-01-01T23:59:59.000Z

249

On Automation in Anesthesia Kristian Soltsz  

E-Print Network [OSTI]

On Automation in Anesthesia Kristian Soltész Department of Automatic Control #12;Department-loop control of the hypnotic and the analgesic components of anesthesia. The objective of the work has been depth. Both induction and maintenance of anesthesia are closed-loop controlled, us- ing a PID controller

250

Automated distribution scheme speeds service restoration  

SciTech Connect (OSTI)

This article describes an automated distribution scheme that met Lakeland Electric requirements for an automated scheme that would restore power to a major customer in less than 60 seconds. In January 1993, Lakeland Electric and Water (LEW) took on the design and construction of a new 12.47-kV automated distribution system for the Publix Supermarket Industrial complex. The industrial complex in Lakeland, Florida, totals 2 million square feet and houses a dairy processing plant, bakery, produce plant, deli plant, data processing facility for Publix`s entire retail network, purchasing department, as well as several maintenance facilities. The retail chain is LEW`s largest customer with a peak demand of 15.5 MW and a load factor of 81%. Publix`s rapid expansion plan has placed a great deal of pressure on this facility to perform at peak level with no interruptions of product flow. The task at hand was to provide Publix with a state-of-the-art, automated, distribution system built to withstand the inherent weather-related situations in central Florida, lightning and hurricanes.

Atwell, E. [Lakeland Electric and Water, FL (United States)] [Lakeland Electric and Water, FL (United States); Gamvrelis, T. [Harris Canada, Inc., Calgary, Alberta (Canada). Control Div.] [Harris Canada, Inc., Calgary, Alberta (Canada). Control Div.; Kearns, D. [S and C Electric Co., Chicago, IL (United States)] [S and C Electric Co., Chicago, IL (United States); Landman, R. [H and L Instruments, North Hampton, NH (United States)] [H and L Instruments, North Hampton, NH (United States)

1996-01-01T23:59:59.000Z

251

Classified Automated Information System Security Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish uniform requirements, policies, responsibilities, and procedures for the development and implementation of a Department of Energy (DOE) Classified Computer Security Program to ensure the security of classified information in automated data processing (ADP) systems. Cancels DOE O 5637.1. Canceled by DOE O 471.2.

1994-07-15T23:59:59.000Z

252

Automated Architectural Exploration for Signal Processing Algorithms  

E-Print Network [OSTI]

Automated Architectural Exploration for Signal Processing Algorithms Ramsey Hourani, Ravi Jenkal, W processing algorithms. The goal of our framework is to improve hardware architectural exploration by guiding Property (IP) cores for system level signal processing algorithms. We present our view of a framework

Davis, Rhett

253

Automated Information Management via Abductive Logic Agents  

E-Print Network [OSTI]

Automated Information Management via Abductive Logic Agents F.Toni 1 Imperial College of Science representation of networks and meta-data via abductive logic programs and make use of the reasoning engine abductive logic pro- grams are equipped with for checking as well as enforcing the properties represented

Toni, Francesca

254

Automated Discovery: a Fusion of Multidisciplinary Principles  

E-Print Network [OSTI]

Automated Discovery: a Fusion of Multidisciplinary Principles Jan M. _Zytkow Computer Science; Piatetsky-Shapiro & Frawley, 1991; Shen, 1993; Shrager & Langley; Simon, Valdes-Perez & Sleeman, 1997; Kulkarni & Simon, 1987; Kocabas & Langley, 1995; Valdes- Perez, 1993. The mere accumulation of new

Ras, Zbigniew W.

255

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

SciTech Connect (OSTI)

This report summarizes San Diego Gas& Electric Company?s collaboration with the Demand Response Research Center to develop and test automation capability for the Capacity Bidding Program in 2007. The report describes the Open Automated Demand Response architecture, summarizes the history of technology development and pilot studies. It also outlines the Capacity Bidding Program and technology being used by an aggregator that participated in this demand response program. Due to delays, the program was not fully operational for summer 2007. However, a test event on October 3, 2007, showed that the project successfully achieved the objective to develop and demonstrate how an open, Web?based interoperable automated notification system for capacity bidding can be used by aggregators for demand response. The system was effective in initiating a fully automated demand response shed at the aggregated sites. This project also demonstrated how aggregators can integrate their demand response automation systems with San Diego Gas& Electric Company?s Demand Response Automation Server and capacity bidding program.

Kiliccote, Sila; Piette, Mary Ann

2008-10-01T23:59:59.000Z

256

Lighting Options for Homes.  

SciTech Connect (OSTI)

This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

Baker, W.S.

1991-04-01T23:59:59.000Z

257

Mobile lighting apparatus  

DOE Patents [OSTI]

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

258

EK101 Engineering Light Smart Lighting  

E-Print Network [OSTI]

EK101 Engineering Light Smart Lighting Homework for 9/10 1. Make an estimate (using if the patent is granted.) 3. What is a lumen? A lux? How are the two related? How would you use a lux meter, (Lux, Lumens/m2) Luminous Flux: Perceivable light power from a source, (Lumens) Use the lux meter

Bifano, Thomas

259

Installation and Commissioning Automated Demand Response Systems  

SciTech Connect (OSTI)

Demand Response (DR) can be defined as actions taken to reduce electric loads when contingencies, such as emergencies and congestion, occur that threaten supply-demand balance, or market conditions raise supply costs. California utilities have offered price and reliability DR based programs to customers to help reduce electric peak demand. The lack of knowledge about the DR programs and how to develop and implement DR control strategies is a barrier to participation in DR programs, as is the lack of automation of DR systems. Most DR activities are manual and require people to first receive notifications, and then act on the information to execute DR strategies. Levels of automation in DR can be defined as follows. Manual Demand Response involves a labor-intensive approach such as manually turning off or changing comfort set points at each equipment switch or controller. Semi-Automated Demand Response involves a pre-programmed demand response strategy initiated by a person via centralized control system. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. The receipt of the external signal initiates pre-programmed demand response strategies. We refer to this as Auto-DR (Piette et. al. 2005). Auto-DR for commercial and industrial facilities can be defined as fully automated DR initiated by a signal from a utility or other appropriate entity and that provides fully-automated connectivity to customer end-use control strategies. One important concept in Auto-DR is that a homeowner or facility manager should be able to 'opt out' or 'override' a DR event if the event comes at time when the reduction in end-use services is not desirable. Therefore, Auto-DR is not handing over total control of the equipment or the facility to the utility but simply allowing the utility to pass on grid related information which then triggers facility defined and programmed strategies if convenient to the facility. From 2003 through 2006 Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) developed and tested a series of demand response automation communications technologies known as Automated Demand Response (Auto-DR). In 2007, LBNL worked with three investor-owned utilities to commercialize and implement Auto-DR programs in their territories. This paper summarizes the history of technology development for Auto-DR, and describes the DR technologies and control strategies utilized at many of the facilities. It outlines early experience in commercializing Auto-DR systems within PG&E DR programs, including the steps to configure the automation technology. The paper also describes the DR sheds derived using three different baseline methodologies. Emphasis is given to the lessons learned from installation and commissioning of Auto-DR systems, with a detailed description of the technical coordination roles and responsibilities, and costs.

Global Energy Partners; Pacific Gas and Electric Company; Kiliccote, Sila; Kiliccote, Sila; Piette, Mary Ann; Wikler, Greg; Prijyanonda, Joe; Chiu, Albert

2008-04-21T23:59:59.000Z

260

Specific light in sculpture  

E-Print Network [OSTI]

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Enhanced training effectiveness using automated student assessment.  

SciTech Connect (OSTI)

Training simulators have become increasingly popular tools for instructing humans on performance in complex environments. However, the question of how to provide individualized and scenario-specific assessment and feedback to students remains largely an open question. In this work, we follow-up on previous evaluations of the Automated Expert Modeling and Automated Student Evaluation (AEMASE) system, which automatically assesses student performance based on observed examples of good and bad performance in a given domain. The current study provides an empirical evaluation of the enhanced training effectiveness achievable with this technology. In particular, we found that students given feedback via the AEMASE-based debrief tool performed significantly better than students given only instructor feedback.

Forsythe, James Chris

2010-05-01T23:59:59.000Z

262

Flow through electrode with automated calibration  

DOE Patents [OSTI]

The present invention is an improved automated flow through electrode liquid monitoring system. The automated system has a sample inlet to a sample pump, a sample outlet from the sample pump to at least one flow through electrode with a waste port. At least one computer controls the sample pump and records data from the at least one flow through electrode for a liquid sample. The improvement relies upon (a) at least one source of a calibration sample connected to (b) an injection valve connected to said sample outlet and connected to said source, said injection valve further connected to said at least one flow through electrode, wherein said injection valve is controlled by said computer to select between said liquid sample or said calibration sample. Advantages include improved accuracy because of more frequent calibrations, no additional labor for calibration, no need to remove the flow through electrode(s), and minimal interruption of sampling.

Szecsody, James E [Richland, WA; Williams, Mark D [Richland, WA; Vermeul, Vince R [Richland, WA

2002-08-20T23:59:59.000Z

263

Automated Information System (AIS) Alarm System  

SciTech Connect (OSTI)

The Automated Information Alarm System is a joint effort between Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratory to demonstrate and implement, on a small-to-medium sized local area network, an automated system that detects and automatically responds to attacks that use readily available tools and methodologies. The Alarm System will sense or detect, assess, and respond to suspicious activities that may be detrimental to information on the network or to continued operation of the network. The responses will allow stopping, isolating, or ejecting the suspicious activities. The number of sensors, the sensitivity of the sensors, the assessment criteria, and the desired responses may be set by the using organization to meet their local security policies.

Hunteman, W.

1997-05-01T23:59:59.000Z

264

The Automated Palomar 60-Inch Telescope  

E-Print Network [OSTI]

We have converted the Palomar 60-inch telescope (P60) from a classical night assistant-operated telescope to a fully robotic facility. The automated system, which has been operational since September 2004, is designed for moderately fast (t <~ 3 minutes) and sustained (R <~ 23 mag) observations of gamma-ray burst afterglows and other transient events. Routine queue-scheduled observations can be interrupted in response to electronic notification of transient events. An automated pipeline reduces data in real-time, which is then stored on a searchable web-based archive for ease of distribution. We describe here the design requirements, hardware and software upgrades, and lessons learned from roboticization. We present an overview of the current system performance as well as plans for future upgrades.

Cenko, S B; Moon, D S; Harrison, F A; Kulkarni, S R; Henning, J R; Guzman, C D; Bonati, M; Smith, R M; Thicksten, R P; Doyle, M W; Petrie, H L; Gal-Yam, A; Soderberg, A M; Anagnostou, N L; Laity, A C; Fox, Derek B.; Moon, Dae-Sik; Harrison, Fiona A.; Henning, John R.; Bonati, Marco; Smith, Roger M.; Thicksten, Robert P.; Doyle, Michael W.; Petrie, Hal L.; Gal-Yam, Avishay; Soderberg, Alicia M.; Anagnostou, Nathaniel L.; Laity, Anastasia C.

2006-01-01T23:59:59.000Z

265

The Automated Palomar 60-Inch Telescope  

E-Print Network [OSTI]

We have converted the Palomar 60-inch telescope (P60) from a classical night assistant-operated telescope to a fully robotic facility. The automated system, which has been operational since September 2004, is designed for moderately fast (t <~ 3 minutes) and sustained (R <~ 23 mag) observations of gamma-ray burst afterglows and other transient events. Routine queue-scheduled observations can be interrupted in response to electronic notification of transient events. An automated pipeline reduces data in real-time, which is then stored on a searchable web-based archive for ease of distribution. We describe here the design requirements, hardware and software upgrades, and lessons learned from roboticization. We present an overview of the current system performance as well as plans for future upgrades.

S. Bradley Cenko; Derek B. Fox; Dae-Sik Moon; Fiona A. Harrison; S. R. Kulkarni; John R. Henning; C. Dani Guzman; Marco Bonati; Roger M. Smith; Robert P. Thicksten; Michael W. Doyle; Hal L. Petrie; Avishay Gal-Yam; Alicia M. Soderberg; Nathaniel L. Anagnostou; Anastasia C. Laity

2006-08-15T23:59:59.000Z

266

Automated diagnostic kiosk for diagnosing diseases  

DOE Patents [OSTI]

An automated and autonomous diagnostic apparatus that is capable of dispensing collection vials and collections kits to users interesting in collecting a biological sample and submitting their collected sample contained within a collection vial into the apparatus for automated diagnostic services. The user communicates with the apparatus through a touch-screen monitor. A user is able to enter personnel information into the apparatus including medical history, insurance information, co-payment, and answer a series of questions regarding their illness, which is used to determine the assay most likely to yield a positive result. Remotely-located physicians can communicate with users of the apparatus using video tele-medicine and request specific assays to be performed. The apparatus archives submitted samples for additional testing. Users may receive their assay results electronically. Users may allow the uploading of their diagnoses into a central databank for disease surveillance purposes.

Regan, John Frederick; Birch, James Michael

2014-02-11T23:59:59.000Z

267

Automated 3D trabecular bone structure analysis of the proximal femur—prediction of biomechanical strength by CT and DXA  

E-Print Network [OSTI]

z ORIGINAL ARTICLE Automated 3D trabecular bone structureIntroduction An automated 3D segmentation algorithm wasstudy was to use an automated 3D segmentation algorithm to

2010-01-01T23:59:59.000Z

268

Automated Microarray Image Analysis Toolbox for MATLAB  

SciTech Connect (OSTI)

The Automated Microarray Image Analysis (AMIA) Toolbox for MATLAB is a flexible, open-source microarray image analysis tool that allows the user to customize analysis of sets of microarray images. This tool provides several methods of identifying and quantify spot statistics, as well as extensive diagnostic statistics and images to identify poor data quality or processing. The open nature of this software allows researchers to understand the algorithms used to provide intensity estimates and to modify them easily if desired.

White, Amanda M.; Daly, Don S.; Willse, Alan R.; Protic, Miroslava; Chandler, Darrell P.

2005-09-01T23:59:59.000Z

269

Algorithms to Automate LCLS Undulator Tuning  

SciTech Connect (OSTI)

Automation of the LCLS undulator tuning offers many advantages to the project. Automation can make a substantial reduction in the amount of time the tuning takes. Undulator tuning is fairly complex and automation can make the final tuning less dependent on the skill of the operator. Also, algorithms are fixed and can be scrutinized and reviewed, as opposed to an individual doing the tuning by hand. This note presents algorithms implemented in a computer program written for LCLS undulator tuning. The LCLS undulators must meet the following specifications. The maximum trajectory walkoff must be less than 5 {micro}m over 10 m. The first field integral must be below 40 x 10{sup -6} Tm. The second field integral must be below 50 x 10{sup -6} Tm{sup 2}. The phase error between the electron motion and the radiation field must be less than 10 degrees in an undulator. The K parameter must have the value of 3.5000 {+-} 0.0005. The phase matching from the break regions into the undulator must be accurate to better than 10 degrees. A phase change of 113 x 2{pi} must take place over a distance of 3.656 m centered on the undulator. Achieving these requirements is the goal of the tuning process. Most of the tuning is done with Hall probe measurements. The field integrals are checked using long coil measurements. An analysis program written in Matlab takes the Hall probe measurements and computes the trajectories, phase errors, K value, etc. The analysis program and its calculation techniques were described in a previous note. In this note, a second Matlab program containing tuning algorithms is described. The algorithms to determine the required number and placement of the shims are discussed in detail. This note describes the operation of a computer program which was written to automate LCLS undulator tuning. The algorithms used to compute the shim sizes and locations are discussed.

Wolf, Zachary

2010-12-03T23:59:59.000Z

270

Automated Algorithm for MFRSR Data Analysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program Cumulus Humilis, 2014Automated Algorithm for MFRSR

271

Automated Centrifugal Chiller Diagnostician - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program Cumulus Humilis, 2014Automated Algorithm for

272

A DISTRIBUTED INTELLIGENT AUTOMATED DEMAND RESPONSE BUILDING MANAGEMENT SYSTEM  

SciTech Connect (OSTI)

The goal of the 2.5 year Distributed Intelligent Automated Demand Response (DIADR) project was to reduce peak electricity load of Sutardja Dai Hall at UC Berkeley by 30% while maintaining a healthy, comfortable, and productive environment for the occupants. We sought to bring together both central and distributed control to provide “deep” demand response1 at the appliance level of the building as well as typical lighting and HVAC applications. This project brought together Siemens Corporate Research and Siemens Building Technology (the building has a Siemens Apogee Building Automation System (BAS)), Lawrence Berkeley National Laboratory (leveraging their Open Automated Demand Response (openADR), Auto-­?Demand Response, and building modeling expertise), and UC Berkeley (related demand response research including distributed wireless control, and grid-­?to-­?building gateway development). Sutardja Dai Hall houses the Center for Information Technology Research in the Interest of Society (CITRIS), which fosters collaboration among industry and faculty and students of four UC campuses (Berkeley, Davis, Merced, and Santa Cruz). The 141,000 square foot building, occupied in 2009, includes typical office spaces and a nanofabrication laboratory. Heating is provided by a district heating system (steam from campus as a byproduct of the campus cogeneration plant); cooling is provided by one of two chillers: a more typical electric centrifugal compressor chiller designed for the cool months (Nov-­? March) and a steam absorption chiller for use in the warm months (April-­?October). Lighting in the open office areas is provided by direct-­?indirect luminaries with Building Management System-­?based scheduling for open areas, and occupancy sensors for private office areas. For the purposes of this project, we focused on the office portion of the building. Annual energy consumption is approximately 8053 MWh; the office portion is estimated as 1924 MWh. The maximum peak load during the study period was 1175 kW. Several new tools facilitated this work, such as the Smart Energy Box, the distributed load controller or Energy Information Gateway, the web-­?based DR controller (dubbed the Central Load-­?Shed Coordinator or CLSC), and the Demand Response Capacity Assessment & Operation Assistance Tool (DRCAOT). In addition, an innovative data aggregator called sMAP (simple Measurement and Actuation Profile) allowed data from different sources collected in a compact form and facilitated detailed analysis of the building systems operation. A smart phone application (RAP or Rapid Audit Protocol) facilitated an inventory of the building’s plug loads. Carbon dioxide sensors located in conference rooms and classrooms allowed demand controlled ventilation. The extensive submetering and nimble access to this data provided great insight into the details of the building operation as well as quick diagnostics and analyses of tests. For example, students discovered a short-­?cycling chiller, a stuck damper, and a leaking cooling coil in the first field tests. For our final field tests, we were able to see how each zone was affected by the DR strategies (e.g., the offices on the 7th floor grew very warm quickly) and fine-­?tune the strategies accordingly.

Auslander, David; Culler, David; Wright, Paul; Lu, Yan; Piette, Mary

2013-12-30T23:59:59.000Z

273

Automated genome mining of ribosomal peptide natural products  

SciTech Connect (OSTI)

Ribosomally synthesized and posttranslationally modified peptides (RiPPs), especially from microbial sources, are a large group of bioactive natural products that are a promising source of new (bio)chemistry and bioactivity (1). In light of exponentially increasing microbial genome databases and improved mass spectrometry (MS)-based metabolomic platforms, there is a need for computational tools that connect natural product genotypes predicted from microbial genome sequences with their corresponding chemotypes from metabolomic datasets. Here, we introduce RiPPquest, a tandem mass spectrometry database search tool for identification of microbial RiPPs and apply it for lanthipeptide discovery. RiPPquest uses genomics to limit search space to the vicinity of RiPP biosynthetic genes and proteomics to analyze extensive peptide modifications and compute p-values of peptide-spectrum matches (PSMs). We highlight RiPPquest by connection of multiple RiPPs from extracts of Streptomyces to their gene clusters and by the discovery of a new class III lanthipeptide, informatipeptin, from Streptomyces viridochromogenes DSM 40736 as the first natural product to be identified in an automated fashion by genome mining. The presented tool is available at cy-clo.ucsd.edu.

Mohimani, Hosein; Kersten, Roland; Liu, Wei; Wang, Mingxun; Purvine, Samuel O.; Wu, Si; Brewer, Heather M.; Pasa-Tolic, Ljiljana; Bandeira, Nuno; Moore, Bradley S.; Pevzner, Pavel A.; Dorrestein, Pieter C.

2014-07-31T23:59:59.000Z

274

Lighting and Daylight Harvesting  

E-Print Network [OSTI]

exposing us to the latest products and technologies. Daylight Harvesting A system of controlling the direction and the quantity of light both natural and artificial within a given space. This implies: Control of fenestration in terms of size..., transmission and direction. Control of reflected light within a space. Control of electric light in terms of delivery and amount Daylight harvesting systems are typically designed to maintain a minimum recommended light level. This light level...

Bos, J.

2011-01-01T23:59:59.000Z

275

A framework for automated PDE-constrained optimisation  

E-Print Network [OSTI]

Mar 1, 2013 ... Its main features are an intuitive mathematical interface, a high degree of automation, and an efficient implementation of the generated adjoint ...

S. W. Funke

2013-03-01T23:59:59.000Z

276

automated hematology analyzer: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

code analyzers Reeves, Douglas S. 3 Analyzing Software Evolvability of an Industrial Automation Control System: A Case Study Computer Technologies and Information Sciences Websites...

277

accurate automated protein: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Seattle, WA 98109, USA Received 28 March 2006; Accepted 11 August 2006 Key words: automation, Bayes, bioinformatics, computation, probabilistic, protein structure, Protinfo...

278

automated container terminals: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

terminal area air traffic control MIT - DSpace Summary: This work studies the automation of the terminal area Air Traffic Management and Control (ATMC) system. The ATMC...

279

automated multistep genetic: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fernandez, Thomas 11 Genetic algorithms for delays evaluation in networked automation systems , S. Amari, J-J. Lesage Physics Websites Summary: Genetic algorithms for...

280

automated seaport container: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

technology, we propose a solution for real-time automated detection Terms-- rootkits, stealth malware, intrusion, con- tainment,virtual machines I. INTRODUCTION Despite to...

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

automated container offering: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

technology, we propose a solution for real-time automated detection Terms-- rootkits, stealth malware, intrusion, con- tainment,virtual machines I. INTRODUCTION Despite to...

282

Automated radioanalytical system for the determination of Sr...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

that can be detected by photomultiplier tubes with good sensitivity, without the use of scintillation cocktails. A laboratory-based automated fluid handling system coupled to a...

283

Towards Automated Story Analysis Using Participatory Harry Halpin  

E-Print Network [OSTI]

Towards Automated Story Analysis Using Participatory Design Harry Halpin Institute University of Edinburgh 2 Buccleuch Place Edinburgh, UK J.Moore@ed.ac.uk Judy Robertson Human Communications

Moore, Johanna D.

284

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network [OSTI]

A. Barat, D. Watson. Demand Response Spinning ReserveOpen Automated Demand Response Communication Standards:Dynamic Controls for Demand Response in a New Commercial

Piette, Mary Ann

2009-01-01T23:59:59.000Z

285

Direct versus Facility Centric Load Control for Automated Demand Response  

E-Print Network [OSTI]

Interoperable Automated Demand Response Infrastructure.and Techniques for Demand Response. LBNL Report 59975. Mayand Communications for Demand Response and Energy Efficiency

Piette, Mary Ann

2010-01-01T23:59:59.000Z

286

Automated Home Energy Management (AHEM) Standing Technical Committee...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Home Energy Management (AHEM) Standing Technical Committee Strategic Plan - February 2012 Automated Home Energy Management (AHEM) Standing Technical Committee Strategic Plan -...

287

automation electronic resource: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in Computer and Information, AT&T Labs Research Prithwish Basu, Senior Scientist, Raytheon BBN Technologies 12;AUTOMATED CLOUD RESOURCE ORCHESTRATION c COPYRIGHT 2012 Changbin...

288

automated concentrate feeding: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

clades that lack larvae or that have specialized larval feeding James C. O& apos; reilly; Stephen M. Deban; Kiisa C. Nishikawa 110 Automation of Milling Machine Using Electro...

289

Automation of Treebank Annotation Thorsten Brants and Wojciech Skut  

E-Print Network [OSTI]

Thorsten Brants and Wojciech Skut (1998) Automation of Treebank Annotation. In D.M.W. Powers (ed.) NeMLaP3

290

ISA Approves Standard for Wireless Automation in Process Control...  

Energy Savers [EERE]

approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA...

291

automated lazy learning: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

that automatically syn- thesizes realistic locomotion for the animation of physics-based models of animals Terzopoulos, Demetri 26 Automated Learning of MuscleActuated Locomotion...

292

Reference Model for Control and Automation Systems in Electrical...  

Broader source: Energy.gov (indexed) [DOE]

Modern infrastructure automation systems are threatened by cyber attack. Their higher visibility in recent years and the increasing use of modern information technology (IT)...

293

automated radar terminal system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

294

automated target recognition: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

VQ Algorithm for Real-Time Object Recognition Engineering Websites Summary: such as vehicle automation, robot localization, and face recognition 1-4. Generally, it is...

295

automated distribution system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

296

automated design system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

297

automated guided vehicle: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

298

automated systems based: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

299

automated tracking system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

300

automation system nas: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

automating instructional design: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

302

automated highway system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

303

automated monitoring system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

304

automation related technology: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

work environments as di- verse as aviation, maritime operations, process control, motor vehicle operation, and informa- tion retrieval. Automation is technology that actively...

305

automated microbiology system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

306

automation design based: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

307

automated cots system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

308

automated ventricular systems: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

309

automating occupational protection: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

systems divide the control architecture into oper- ationandVeri cation of Automated Vehicle Protection Systems (extended abstract) H.B. Weinberg Nancy Lynch yO automaton...

310

automated control systems: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

311

automated culture systems: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

312

acquisition automated system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

313

automated highway systems: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

314

automated control system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

315

automated maintenance environment: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

work environments as di- verse as aviation, maritime operations, process control, motor vehicle operation, and informa- tion retrieval. Automation is technology that actively...

316

automated diagnostic system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

317

automated highways: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

318

automated classification system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ioannou A, utomatic is todesign and test avehicle control system in order toachieve full vehicle automation in the longitudinal vehicle following isan important feature of a fully...

319

automated fault extraction: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

algorithms seem to have so far limited the industrial uptake of existing automated FMEA technology. In this paper, we describe a new tool for the automatic synthesis of...

320

Integrating automated shading and smart glazings with daylight controls  

E-Print Network [OSTI]

Automated Shading and Smart Glazings with Daylight Controlsdaylighting, controls, smart glazing, shading, fielddeveloping switchable “smart glazings” for over a decade and

Selkowitz, Stephen; Lee, Eleanor

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Automated High-Pressure Titration System with In Situ Infrared...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High-Pressure Titration System with In Situ Infrared Spectroscopic Detection. Automated High-Pressure Titration System with In Situ Infrared Spectroscopic Detection. Abstract: A...

322

Opportunities for Automated Demand Response in Wastewater Treatment  

E-Print Network [OSTI]

LBNL-6056E Opportunities for Automated Demand Response in Wastewater Treatment Facilities Figure 1: Simplified diagram of major processes at a typical wastewater treatment plant #12;Results

323

Automated portable analyzer for lead(II) based on sequential...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

flow technique which required minimal volume of samples and reagents and allowed the automation of the analyzer operation. The portable analyzer was evaluated for lead (Pb)...

324

Automation of Nested Matrix and Derivative Operations Robert Kalaba  

E-Print Network [OSTI]

Automation of Nested Matrix and Derivative Operations Robert Kalaba Departments of Electrical of expressions involving nested matrix and derivative operations. The need to differentiate such expressions

Tesfatsion, Leigh

325

16.459 Humans & Automation Seminar February 6, 2002  

E-Print Network [OSTI]

Airliner cockpit procedure examination Nuclear power plant automation evaluation Air combat situation Knowledge Procedural Knowledge Tasks · Manage battle space · Evaluate track · Plan specific threat response

Goldwasser, Shafi

326

Results and commissioning issues from an automated demand response pilot  

E-Print Network [OSTI]

Management and Demand Response in Commercial Buildings", L BAutomated Demand Response National Conference on BuildingAutomated Demand Response National Conference on Building

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

327

Scenarios for Consuming Standardized Automated Demand Response Signals  

E-Print Network [OSTI]

Keywords: Demand response, automation, commercial buildings,Demand Response and Energy Efficiency in Commercial Buildings,Building Control Strategies and Techniques for Demand Response.

Koch, Ed

2009-01-01T23:59:59.000Z

328

Automated Critical Peak Pricing Field Tests: Program Description and Results  

E-Print Network [OSTI]

is manual demand response -- where building staff receive afor demand response analysis ?ELECTRIC Whole building powerof automated demand response (Auto-DR) in buildings and

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Xu, Peng

2006-01-01T23:59:59.000Z

329

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network [OSTI]

for Automated Demand Response in Commercial Buildings. Inbased demand response information to building controlDemand Response Standard for the Residential Sector. California Energy Commission, PIER Buildings

Ghatikar, Girish

2010-01-01T23:59:59.000Z

330

Direct versus Facility Centric Load Control for Automated Demand Response  

E-Print Network [OSTI]

Keywords: Demand response, automation, commercial buildings,Demand Response and Energy Efficiency in Commercial Buildings,Building Control Strategies and Techniques for Demand Response.

Piette, Mary Ann

2010-01-01T23:59:59.000Z

331

automated eddy current: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

model-assisted POD study. Keywords 2 AUTOMATED ANALYSIS OF EDDY CURRENT SIGNALS IN STEAM GENERATOR TUBE INSPECTION CiteSeer Summary: Abstract: Accurate and consistent...

332

Reference Model for Control and Automation Systems in Electrical...  

Broader source: Energy.gov (indexed) [DOE]

Reference Model for Control and Automation Systems in Electrical Power Version 1.2 October 12, 2005 Prepared by: Sandia National Laboratories' Center for SCADA Security Jason...

333

automated worm response: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

a means to accurately model the early phase Bagchi, Saurabh 11 Analysis of Open Automated Demand Response Deployments in California Energy Storage, Conversion and Utilization...

334

automated critical peakpricing: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of California eScholarship Repository Summary: to show the potential for automated demand response systems.of their demand response strategy. If the potential site...

335

automated perfit analysis: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

12;The Big Picture X-ray Microanalysis Perkins, Richard A. 10 Analysis of Open Automated Demand Response Deployments in California Energy Storage, Conversion and Utilization...

336

automated test system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

design: Choosing inputs Mousavi, Mohammad 2 Automated System Testing of Dynamic Web Applications CiteSeer Summary: Abstract. Web applications pervade all aspects of human...

337

Automated third generation squark production to next-to-leading order  

E-Print Network [OSTI]

If light--flavor squarks and gluinos are indeed heavy and chargino pair production is plagued with overwhelming backgrounds, pair production and associated production of stops and charginos will become the key signatures in the upcoming LHC runs. We present fully automated next-to-leading order predictions for heavy flavor squark production at the LHC, including stop-chargino associated production, based on MadGolem. We compute the total and differential NLO rates for a variety of MSSM scenarios with a light third generation. We focus on theoretical uncertainties on differential rates, including a comparison to multi-jet merging and the impact of bottom parton densities for stop-chargino associated production. We find that for the associated production channel the rates can reach tens of femtobarns, but the scale dependence does not provide a conservative estimate of the theoretical uncertainties.

Dorival Goncalves; David Lopez-Val; Kentarou Mawatari; Tilman Plehn

2014-07-16T23:59:59.000Z

338

TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. X, NO. X, MONTH 20XX 1 Automated Guiding Task of a Flexible Micropart  

E-Print Network [OSTI]

TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, VOL. X, NO. X, MONTH 20XX 1 Automated Guiding´edric Cl´evy, and Philippe Lutz, Member, IEEE Abstract--This paper studies automated tasks based on hybrid. The experimental results of automated guiding task are presented. Note to Practitioners -- This article

Paris-Sud XI, Université de

339

The Role of Human-Automation Consensus in Multiple Unmanned Vehicle Scheduling  

E-Print Network [OSTI]

The Role of Human-Automation Consensus in Multiple Unmanned Vehicle Scheduling M. L. Cummings with the automation, which resulted in better performance. Conclusion: In decentralized unmanned vehicle networks systems. KEYWORDS: multiple unmanned vehicles, human supervisory control, workload, human- automation

Cummings, Mary "Missy"

340

automated patient-specific health: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

automated passive-finger stimulator: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

342

automated pre-ejection period: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

343

HUMAN-AUTOMATION COLLABORATION IN DYNAMIC MISSION PLANNING: A CHALLENGE REQUIRING AN ECOLOGICAL APPROACH  

E-Print Network [OSTI]

unmanned vehicles missions, pushing towards a higher level of autonomy for automated planning systems automation systems. INTRODUCTION Unmanned vehicle systems (UVs) could become "force multipliers" if smallHUMAN-AUTOMATION COLLABORATION IN DYNAMIC MISSION PLANNING: A CHALLENGE REQUIRING AN ECOLOGICAL

Lee, John D.

344

automated pre-symptomatic disease: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

345

automated high-content screening: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

346

Methodology for prototyping increased levels of automation for spacecraft rendezvous functions  

E-Print Network [OSTI]

The Crew Exploration Vehicle (CEV) necessitates higher levels of automation than previous NASA vehicles due to program requirements for automation, including Automated Rendezvous and Docking (AR&D). Studies of spacecraft development often point...

Hart, Jeremy Jay

2009-05-15T23:59:59.000Z

347

automated self-administered 24-hour: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

348

automated radioxenon sampler-analyzer: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

349

automated mrs-based classifier-development: Topics by E-print...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

350

automated liquid chromatography-matrix: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: of a partial automation since they act on the control part of the vehicle. This increasing automationABV- A Low Speed Automation Project to Study the...

351

IEEE Transactions on Automation Science and Engineering Compensation of Scanner Creep and Hysteresis  

E-Print Network [OSTI]

IEEE Transactions on Automation Science and Engineering Compensation of Scanner Creep uncertainties associated with creep and hysteresis, and supports automated, computer-controlled manipulation) and by automation, which bypasses the time- consuming

Southern California, University of

352

Robotics and Manufacturing Automation Laboratory of the MMRI http://robotics.mcmaster.ca  

E-Print Network [OSTI]

Robotics and Manufacturing Automation Laboratory of the MMRI http://robotics.mcmaster.ca Powered Chan and Matthew Lahey Robotics and Manufacturing Automation Laboratory, McMaster Manufacturing Research Institute (MMRI). The 14th International Conference on Flexible Automation and Intelligent

Bone, Gary

353

E-Print Network 3.0 - automated feature extraction Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Physics 7 Solid Edge ActiveXSolid Edge ActiveX AutomationAutomation Summary: X Automation works? In Solid Edge, every document, every part, and every feature ofIn Solid Edge,...

354

AUTOMATED, ACCURATE, AND INEXPENSIVE SOLUTION-PREPARATION ON A DIGITAL MICROFLUIDIC BIOCHIP*  

E-Print Network [OSTI]

AUTOMATED, ACCURATE, AND INEXPENSIVE SOLUTION- PREPARATION ON A DIGITAL MICROFLUIDIC BIOCHIP* Tao propose an electrowetting-based "digital" microfluidic biochip design for automated solution-crystallization application. Index Terms: Digital microfluidics, droplets, laboratory automation, sample preparation. I

Chakrabarty, Krishnendu

355

Effects of an Advanced Reactor’s Design, Use of Automation, and Mission on Human Operators  

SciTech Connect (OSTI)

The roles, functions, and tasks of the human operator in existing light water nuclear power plants (NPPs) are based on sound nuclear and human factors engineering (HFE) principles, are well defined by the plant’s conduct of operations, and have been validated by years of operating experience. However, advanced NPPs whose engineering designs differ from existing light-water reactors (LWRs) will impose changes on the roles, functions, and tasks of the human operators. The plans to increase the use of automation, reduce staffing levels, and add to the mission of these advanced NPPs will also affect the operator’s roles, functions, and tasks. We assert that these factors, which do not appear to have received a lot of attention by the design engineers of advanced NPPs relative to the attention given to conceptual design of these reactors, can have significant risk implications for the operators and overall plant safety if not mitigated appropriately. This paper presents a high-level analysis of a specific advanced NPP and how its engineered design, its plan to use greater levels of automation, and its expanded mission have risk significant implications on operator performance and overall plant safety.

Jeffrey C. Joe; Johanna H. Oxstrand

2014-06-01T23:59:59.000Z

356

AUTOMATED PROCESS MONITORING: APPLYING PROVEN AUTOMATION TECHNIQUES TO INTERNATIONAL SAFEGUARDS NEEDS  

SciTech Connect (OSTI)

Identification and quantification of specific alpha- and beta-emitting radionuclides in complex liquid matrices is highly challenging, and is typically accomplished through laborious wet chemical sample preparation and separations followed by analysis using a variety of detection methodologies (e.g., liquid scintillation, gas proportional counting, alpha energy analysis, mass spectrometry). Analytical results may take days or weeks to report. Chains of custody and sample security measures may also complicate or slow the analytical process. When an industrial process-scale plant requires the monitoring of specific radionuclides as an indication of the composition of its feed stream or of plant performance, radiochemical measurements must be fast, accurate, and reliable. Scientists at Pacific Northwest National Laboratory have assembled a fully automated prototype Process Monitor instrument capable of a variety of tasks: automated sampling directly from a feed stream, sample digestion / analyte redox adjustment, chemical separations, radiochemical detection and data analysis / reporting. The system is compact, its components are fluidically inter-linked, and analytical results could be immediately transmitted to on- or off-site locations. The development of a rapid radiochemical Process Monitor for 99Tc in Hanford tank waste processing streams, capable of performing several measurements per hour, will be discussed in detail. More recently, the automated platform was modified to perform measurements of 90Sr in Hanford tank waste stimulant. The system exemplifies how automation could be integrated into reprocessing facilities to support international nuclear safeguards needs.

O'Hara, Matthew J.; Durst, Philip C.; Grate, Jay W.; Devol, Timothy A.; Egorov, Oleg; Clements, John P.

2008-07-13T23:59:59.000Z

357

Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR  

E-Print Network [OSTI]

2009. Open Automated Demand Response Communications2010. Open Automated Demand Response Technologies forenergy efficiency and demand response: Framework concepts

Kim, Joyce Jihyun

2014-01-01T23:59:59.000Z

358

Automated fluid analysis apparatus and techniques  

DOE Patents [OSTI]

An automated device that couples a pair of differently sized sample loops with a syringe pump and a source of degassed water. A fluid sample is mounted at an inlet port and delivered to the sample loops. A selected sample from the sample loops is diluted in the syringe pump with the degassed water and fed to a flow through detector for analysis. The sample inlet is also directly connected to the syringe pump to selectively perform analysis without dilution. The device is airtight and used to detect oxygen-sensitive species, such as dithionite in groundwater following a remedial injection to treat soil contamination.

Szecsody, James E.

2004-03-16T23:59:59.000Z

359

Automated inspection of hot steel slabs  

DOE Patents [OSTI]

The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes.

Martin, Ronald J. (Burnsville, MN)

1985-01-01T23:59:59.000Z

360

Automated inspection of hot steel slabs  

DOE Patents [OSTI]

The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes. 5 figs.

Martin, R.J.

1985-12-24T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Automation of one-loop QCD corrections  

E-Print Network [OSTI]

We present the complete automation of the computation of one-loop QCD corrections, including UV renormalization, to an arbitrary scattering process in the Standard Model. This is achieved by embedding the OPP integrand reduction technique, as implemented in CutTools, into the MadGraph framework. By interfacing the tool so constructed, which we dub MadLoop, with MadFKS, the fully automatic computation of any infrared-safe observable at the next-to-leading order in QCD is attained. We demonstrate the flexibility and the reach of our method by calculating the production rates for a variety of processes at the 7 TeV LHC.

Valentin Hirschi; Rikkert Frederix; Stefano Frixione; Maria Vittoria Garzelli; Fabio Maltoni; Roberto Pittau

2013-05-14T23:59:59.000Z

362

An automated vacuum gauge calibration system  

SciTech Connect (OSTI)

An automated system for calibrating vacuum gauges over the pressure range of 10{sup {minus}6} to 0.1 Pa was designed and constructed at the National Institute of Standards and Technology (NIST) for the Department of Energy (DOE) Primary Standards Laboratory at Sandia National Laboratories (SNL). Calculable pressures are generated by passing a known flow of gas through an orifice of known conductance. The orifice conductance is derived from dimensional measurements and accurate flows are generated using metal capillary leaks. The expanded uncertainty (k = 2) in the generated pressure is estimated to be between 1% and 4% over the calibration range. The design, calibration results. and component uncertainties will be discussed.

Abbott, P.J. [NIST, GAithersburg, MD (United States); Benner, M.S. [Sandia National Labs., Albuquerque, NM (United States)

1998-04-01T23:59:59.000Z

363

Automated Surface Observing System: Standby Power Options  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustionImprovement3--Logistical5/08 Attendance List1-02Evaluation Report(AO) AuthorizingAutomated

364

E-Print Network 3.0 - automated seepage meters Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

there exists less information on the mechanism An automated dye-dilution based seepage meter... , Woods Hole, Massachusetts 02543 Abstract We designed an automated seepage meter...

365

automated angle-scanning photoemission: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

that have a high permittivity at frequencies ... Jain, Sidharath 2013-01-01 3 Test Automation Test Automation Computer Technologies and Information Sciences Websites Summary:...

366

automated high-dimensional flow: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

reagents. The availability of new platforms, allowing ... Pyne, Saumyadipta 2 Automation of radiochemical analysis by applying flow Physics Websites Summary: Automation of...

367

Demand Response and Open Automated Demand Response Opportunities for Data Centers  

E-Print Network [OSTI]

Standardized Automated Demand Response Signals. Presented atand Automated Demand Response in Industrial RefrigeratedActions for Industrial Demand Response in California. LBNL-

Mares, K.C.

2010-01-01T23:59:59.000Z

368

Opportunities for Energy Efficiency and Automated Demand Response in Industrial Refrigerated Warehouses in California  

E-Print Network [OSTI]

your Power. (2008). "Demand Response Programs." RetrievedS. (2008). Automated Demand Response Results from Multi-Yearusing Open Automated Demand Response, California Energy

Lekov, Alex

2009-01-01T23:59:59.000Z

369

Design and Implementation of an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network [OSTI]

of Fully Automated Demand Response in Large Facilities. CEC-Fully Automated Demand Response Tests in Large Facilities.Management and Demand Response in Commercial Building. ,

Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

2008-01-01T23:59:59.000Z

370

Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings  

E-Print Network [OSTI]

Open Automated Demand Response Demonstration Project” LBNL-2009a). “Open Automated Demand Response Communications inand Actions for Industrial Demand Response in California. ”

Kiliccote, Sila

2010-01-01T23:59:59.000Z

371

E-Print Network 3.0 - automated contract time Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contracts with Myopic and Strategic Agents Summary: order basis by automated contracting. Such automationcan save labor time of human negotiators... In automated...

372

E-Print Network 3.0 - automated optical inspection Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TOPICS IN QUANTUM ELECTRONICS, VOL. 10, NO. 3, MAYJUNE 2004 445 Model-Based Optoelectronic Packaging Automation Summary: , photonic automation. I. INTRODUCTION THE current...

373

E-Print Network 3.0 - automated critical peak Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TOPICS IN QUANTUM ELECTRONICS, VOL. 10, NO. 3, MAYJUNE 2004 445 Model-Based Optoelectronic Packaging Automation Summary: increase the speed of the automation process, a...

374

Decon2LS: An Open-Source Software Package for Automated Processing...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software Package for Automated Processing and Visualization of High Resolution Mass Spectrometry Data. Decon2LS: An Open-Source Software Package for Automated Processing and...

375

E-Print Network 3.0 - automated lecture capture Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

lecture capture Search Powered by Explorit Topic List Advanced Search Sample search results for: automated lecture capture Page: << < 1 2 3 4 5 > >> 1 CS 763: Automated Software...

376

E-Print Network 3.0 - automating spreadsheet discovery Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Information Sciences 56 Automated Test Case Generation for Spreadsheets Marc Fisher, Mingming Cao, Gregg Rothermel, Curtis R. Cook, Margaret M. Burnett Summary: Automated Test...

377

automated whole-genome multiple: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

tracking Automated surveillance systems a b Abidi, Mongi A. 42 The Role of Human-Automation Consensus in Multiple Unmanned Vehicle Scheduling Engineering Websites Summary:...

378

E-Print Network 3.0 - automated precise time Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

available to security automation designers... Security Automation Considered Harmful? W. Keith ... Source: Edwards, Keith - College of Computing, Georgia Institute of Technology;...

379

Department of Mechanical and Nuclear Engineering Spring 2011 Wind Tunnel Automation Project  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical and Nuclear Engineering Spring 2011 Wind Tunnel Automation Project Phase II - Automated Bike Turret Mount Overview SYNERGE LLC is a consulting company working

Demirel, Melik C.

380

E-Print Network 3.0 - automated process monitoring Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

automation if they are engaged concurrently... whether centrally locating an automated task would boost ... Source: Parasuraman, Raja - Department of Psychology, George Mason...

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Demonstration of Datacenter Automation Software and Hardware (DASH) at the California Franchise Tax Board  

E-Print Network [OSTI]

2009. Demonstration of Datacenter Automation Software andDemonstration of Datacenter Automation Software andand tested while other datacenter cooling best practices

Bell, Geoffrey C.

2010-01-01T23:59:59.000Z

382

E-Print Network 3.0 - automated service composition Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

satisfaction of Summary: -driven tool for experiment automation (Weevil) Designing a web service composition to evaluate... UROP 2010 Automated Services Management over...

383

E-Print Network 3.0 - automated chemistry control Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: automated chemistry control Page: << < 1 2 3 4 5 > >> 1 IEEE Robotics and Automation Society announces a...

384

E-Print Network 3.0 - automated software packages Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Michele Lanza Summary: is providing a way to automate the package characterization process. To ad- dress this challenge, we propose... that automate the package patterns...

385

E-Print Network 3.0 - automated quantitative analysis Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

as they gather critical information, and explores the use of automation to increase the efficiency... organizations automate reporting and measurement to improve project, program...

386

E-Print Network 3.0 - automated watering systems Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

automated sample extraction injection systems have been installed... to the Lab's Quattro Micro triple quadrupole mass spectrometer. The Symbiosys Enviro is an automated system......

387

E-Print Network 3.0 - automated model abstraction Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

overview article describes the goals, concepts... of HAVEit is to develop and investigate vehicle automation beyond ADAS systems, especially highly automated Source: Ecole...

388

Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings  

E-Print Network [OSTI]

Automated Demand Response for Small Commercial Buildings. ”Demand Response Strategies and Commissioning Commercial Buildingfor Automated Demand Response in Commercial Buildings Sila

Kiliccote, Sila

2010-01-01T23:59:59.000Z

389

Automated Termination Analysis: From Term Rewriting to Programming Languages  

E-Print Network [OSTI]

Automated Termination Analysis: From Term Rewriting to Programming Languages J¨urgen Giesl LuFG Informatik 2 RWTH Aachen Ahornstr. 55 52074 Aachen, Germany giesl@informatik.rwth-aachen.de Termination important for program verification. Traditionally, tech- niques for automated termination analysis were

Ábrahám, Erika

390

Automated Modular Termination Proofs for Real Prolog Programs  

E-Print Network [OSTI]

Automated Modular Termination Proofs for Real Prolog Programs Martin M¨uller Thomas Glaß Karl the termination of Prolog programs that can be automated and is scalable. Furthermore, the proposed method can of complexity to predicate calls. Then termination of a program is shown by proving this measure

Stroetmann, Karl

391

Advancing Toward Test Automation through Effective Manual Testing  

E-Print Network [OSTI]

. This paper will walk through a best practice scenario for using Manual Tester to more naturally organize test Automation through Effective Manual Testing Bob Levy, Lead Product Manager ­ Functional Test Dennis ElenburgAdvancing Toward Test Automation through Effective Manual Testing May 2005 Advancing Toward Test

392

End User Impacts of Automated Electrochromic Windows in a Pilot  

E-Print Network [OSTI]

LBNL-6027E End User Impacts of Automated Electrochromic Windows in a Pilot Retrofit Application E Electrochromic Windows in a Pilot Retrofit Application Eleanor S. Lee1 Abstract , Erin S. Claybaugh Building Independence Avenue, S.W., Washington, DC 20585 USA Automated electrochromic (EC) windows, advanced thermally

393

automated flight test: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

flight test First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Test Automation Test Automation Computer...

394

Maneuvers automation for agricultural vehicle in headland , R. Lenain1  

E-Print Network [OSTI]

1 Maneuvers automation for agricultural vehicle in headland C. Cariou1 , R. Lenain1 , B. Thuilot2 agricultural vehicles), the automation of headland driving has to be studied with meticulous care. Fig 1 for the autonomous maneuvers of agricultural vehicle in headland. A reverse turn planner is firstly presented, based

Paris-Sud XI, Université de

395

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways Alain Girault a aInria Rh of the hybrid control of autonomous vehicles driving on automated highways. Vehicles are autonomous, so they do not commu- nicate with each other nor with the infrastructure. Two problems have to be dealt with: a vehicle

Girault, Alain

396

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways #  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways # Alain Girault a a Inria the problem of the hybrid control of autonomous vehicles driving on automated highways. Vehicles to be dealt with: a vehicle driving in a single­lane highway must never collide with its leading vehicle

Girault, Alain

397

Automated Self-Assembly Programming Paradigm: A Particle Swarm Realization  

E-Print Network [OSTI]

Automated Self-Assembly Programming Paradigm: A Particle Swarm Realization Lin Li, Natalio Automated Self-Assembly Programming Para- digm (ASAP2 ). We investigated how external environment settings affect population diversity and software self-assembly efficiency. In this paper, we introduce

Aickelin, Uwe

398

AUTOMATION OF ENERGY DEMAND FORECASTING Sanzad Siddique, B.S.  

E-Print Network [OSTI]

AUTOMATION OF ENERGY DEMAND FORECASTING by Sanzad Siddique, B.S. A Thesis submitted to the Faculty OF ENERGY DEMAND FORECASTING Sanzad Siddique, B.S. Marquette University, 2013 Automation of energy demand of the energy demand forecasting are achieved by integrating nonlinear transformations within the models

Povinelli, Richard J.

399

Fast Automated Demand Response to Enable the Integration of Renewable  

E-Print Network [OSTI]

LBNL-5555E Fast Automated Demand Response to Enable the Integration of Renewable Resources David S The work described in this report was coordinated by the Demand Response Research Center and funded ABSTRACT This study examines how fast automated demand response (AutoDR) can help mitigate grid balancing

400

HIGHER-ORDER MODELING AND AUTOMATED DESIGN-SPACE EXPLORATION  

E-Print Network [OSTI]

the second requires the exis- tence of an automated process for design space exploration. There are many waysHIGHER-ORDER MODELING AND AUTOMATED DESIGN-SPACE EXPLORATION J¨orn W. Janneck EECS Department exploration, exploratory simula- tion, performance evaluation, higher-order models ABSTRACT An important part

Esser, Robert

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Design and Control of a Fully Automated Vehicle door  

E-Print Network [OSTI]

The objective of the research was to develop a fully automated vehicle car door that can detect any object obstructing its path during operation. A fully automated door concept has not yet been implemented in the car industry. The door, operated via...

Hong, Kyung-Min

2010-07-14T23:59:59.000Z

402

automated energy distribution: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

automated energy distribution First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Automated Energy...

403

Automated Stellar Spectral Classification and Parameterization for the Masses  

E-Print Network [OSTI]

Stellar spectroscopic classification has been successfully automated by a number of groups. Automated classification and parameterization work best when applied to a homogeneous data set, and thus these techniques primarily have been developed for and applied to large surveys. While most ongoing large spectroscopic surveys target extragalactic objects, many stellar spectra have been and will be obtained. We briefly summarize past work on automated classification and parameterization, with emphasis on the work done in our group. Accurate automated classification in the spectral type domain and parameterization in the temperature domain have been relatively easy. Automated parameterization in the metallicity domain, formally outside the MK system, has also been effective. Due to the subtle effects on the spectrum, automated classification in the luminosity domain has been somewhat more difficult, but still successful. In order to extend the use of automated techniques beyond a few surveys, we present our current efforts at building a web-based automated stellar spectroscopic classification and parameterization machine. Our proposed machinery would provide users with MK classifications as well as the astrophysical parameters of effective temperature, surface gravity, mean abundance, abundance anomalies, and microturbulence.

Ted von Hippel; Carlos Allende Prieto; Chris Sneden

2002-08-08T23:59:59.000Z

404

Automated Black-Box Testing with Abstract VDM Oracles  

E-Print Network [OSTI]

as test oracles for concrete software. The automation of the resulting testing frame-work is based of a target system. For that reason, a mapping between abstract and concrete test data is requiredAutomated Black-Box Testing with Abstract VDM Oracles Bernhard K. Aichernig Technical University

405

NEW INDUSTRIAL AUTOMATION LABORATORY & COURSES ECET TECHONOLOGY PROGRAM ADVANCEMENT  

E-Print Network [OSTI]

, controllers and drives. Students design, simulate, build, test and document automation systems for Capstone equipment. 3. Measure vibration and power-line harmonic distortion. 4. Effectively identify, formulate of automation and electronics equipment provide the basis for new courses in technology and engineering

Allen, Gale

406

Field Demonstration of Automated Demand Response for Both Winter and  

E-Print Network [OSTI]

) is a demand-side management strategy to reduce electricity use during times of high peak electric loads;1 Field Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings of a series of field test of automated demand response systems in large buildings in the Pacific Northwest

407

Kyler Nelson Light Timer  

E-Print Network [OSTI]

designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

Kachroo, Pushkin

408

Submitted to Energy and Buildings February 23, 2005 and accepted for publication March 1, 2006. Subject responses to electrochromic windows  

E-Print Network [OSTI]

. LBNL-57125 Subject responses to electrochromic windows R.D. Clear* , V. Inkarojrit, E.S. Lee Building in a private office with switchable electrochromic windows, manually- operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3

409

AIRPORT LIGHTING Session Highlights  

E-Print Network [OSTI]

AIRPORT LIGHTING Session Highlights In May 2002, the Airport Technical Assistance Program, also known as AirTAP, sponsored three airport-lighting training sessions at different locations in Minnesota information on airport lighting and navigational aid equipment selection, funding, maintenance, and operation

Minnesota, University of

410

Advanced Demand Responsive Lighting  

E-Print Network [OSTI]

Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

411

Automated laser scatter detection of surface and subsurface defects in Si{sub 3}N{sub 4} components  

SciTech Connect (OSTI)

Silicon Nitride (Si{sub 3}N{sub 4}) ceramics are currently a primary material of choice to replace conventional materials in many structural applications because of their oxidation resistance and desirable mechanical and thermal properties at elevated temperatures. However, surface or near-subsurface defects, such as cracks, voids, or inclusions, significantly affect component lifetimes. These defects are currently difficult to detect, so a technique is desired for the rapid automated detection and quantification of both surface and subsurface defects. To address this issue, the authors have developed an automated system based on the detection of scattered laser light which provides a 2-D map of surface or subsurface defects. This system has been used for the analysis of flexure bars and button-head tensile rods of several Si{sub 3}N{sub 4} materials. Mechanical properties of these bars have also been determined and compared with the laser scatter results.

Steckenrider, J.S. [Argonne National Lab., IL (United States). Energy Technology Div.

1995-06-01T23:59:59.000Z

412

Light emitting device comprising phosphorescent materials for white light generation  

DOE Patents [OSTI]

The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

Thompson, Mark E.; Dapkus, P. Daniel

2014-07-22T23:59:59.000Z

413

Light Duty Combustion Research: Advanced Light-Duty Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and Vehicle...

414

Development and evaluation of fully automated demand response in large facilities  

SciTech Connect (OSTI)

This report describes the results of a research project to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve electric grid reliability, manage electricity costs, and ensure that customers receive signals that encourage load reduction during times when the electric grid is near its capacity. The two main drivers for widespread demand responsiveness are the prevention of future electricity crises and the reduction of electricity prices. Additional goals for price responsiveness include equity through cost of service pricing, and customer control of electricity usage and bills. The technology developed and evaluated in this report could be used to support numerous forms of DR programs and tariffs. For the purpose of this report, we have defined three levels of Demand Response automation. Manual Demand Response involves manually turning off lights or equipment; this can be a labor-intensive approach. Semi-Automated Response involves the use of building energy management control systems for load shedding, where a preprogrammed load shedding strategy is initiated by facilities staff. Fully-Automated Demand Response is initiated at a building or facility through receipt of an external communications signal--facility staff set up a pre-programmed load shedding strategy which is automatically initiated by the system without the need for human intervention. We have defined this approach to be Auto-DR. An important concept in Auto-DR is that a facility manager is able to ''opt out'' or ''override'' an individual DR event if it occurs at a time when the reduction in end-use services is not desirable. This project sought to improve the feasibility and nature of Auto-DR strategies in large facilities. The research focused on technology development, testing, characterization, and evaluation relating to Auto-DR. This evaluation also included the related decisionmaking perspectives of the facility owners and managers. Another goal of this project was to develop and test a real-time signal for automated demand response that provided a common communication infrastructure for diverse facilities. The six facilities recruited for this project were selected from the facilities that received CEC funds for new DR technology during California's 2000-2001 electricity crises (AB970 and SB-5X).

Piette, Mary Ann; Sezgen, Osman; Watson, David S.; Motegi, Naoya; Shockman, Christine; ten Hope, Laurie

2004-03-30T23:59:59.000Z

415

Text-Alternative Version: Better than CFL? Dimmable LED Downlights in Hospitality Facilities Webinar  

Broader source: Energy.gov [DOE]

Linda Sandahl: First, I’m very happy to welcome our speakers: Bob Davis of Pacific Northwest National Laboratory and Ardra Zinkon of Tec Studio.

416

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

417

Light extraction from organic light-emitting diodes for lighting applications by sand-blasting  

E-Print Network [OSTI]

Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

418

SMART LIGHTING SYSTEMS ULTIMATE LIGHTING The Smart Lighting  

E-Print Network [OSTI]

Integration (Holistic Integrated Design) · Sensors as important as LEDs · Interconnected systems (human, building, grid) · Artistic Design Freedom · Lighting is Health, Entertainment, Information and Illumination Cost at any brightness · Chip level integrated electronics THE ERC RESEARCH COVERS THE ENTIRE SUPPLY

Linhardt, Robert J.

419

This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING  

E-Print Network [OSTI]

This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING Building Energy Management: Integrated Control of Active and Passive Heating, Cooling, Lighting, Shading

Luh, Peter

420

Identifying Requirements for Effective Human-Automation Teamwork  

SciTech Connect (OSTI)

Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

Jeffrey C. Joe; John O'Hara; Heather D. Medema; Johanna H. Oxstrand

2014-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Automated behavioural fingerprinting of C. elegans mutants  

E-Print Network [OSTI]

Rapid advances in genetics, genomics, and imaging have given insight into the molecular and cellular basis of behaviour in a variety of model organisms with unprecedented detail and scope. It is increasingly routine to isolate behavioural mutants, clone and characterise mutant genes, and discern the molecular and neural basis for a behavioural phenotype. Conversely, reverse genetic approaches have made it possible to straightforwardly identify genes of interest in whole-genome sequences and generate mutants that can be subjected to phenotypic analysis. In this latter approach, it is the phenotyping that presents the major bottleneck; when it comes to connecting phenotype to genotype in freely behaving animals, analysis of behaviour itself remains superficial and time consuming. However, many proof-of-principle studies of automated behavioural analysis over the last decade have poised the field on the verge of exciting developments that promise to begin closing this gap. In the broadest sense, our goal in this...

Brown, André E X

2013-01-01T23:59:59.000Z

422

Automated Spot Weld Inspection using Infrared Thermography  

SciTech Connect (OSTI)

An automated non-contact and non-destructive resistance spot weld inspection system based on infrared (IR) thermography was developed for post-weld applications. During inspection, a weld coupon was heated up by an auxiliary induction heating device from one side of the weld, while the resulting thermal waves on the other side were observed by an IR camera. The IR images were analyzed to extract a thermal signature based on normalized heating time, which was then quantitatively correlated to the spot weld nugget size. The use of normalized instead of absolute IR intensity was found to be useful in minimizing the sensitivity to the unknown surface conditions and environment interference. Application of the IR-based inspection system to different advanced high strength steels, thickness gauges and coatings were discussed.

Chen, Jian [ORNL] [ORNL; Zhang, Wei [ORNL] [ORNL; Yu, Zhenzhen [ORNL] [ORNL; Feng, Zhili [ORNL] [ORNL

2012-01-01T23:59:59.000Z

423

Automated interferometric alignment system for paraboloidal mirrors  

DOE Patents [OSTI]

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aigning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront.

Maxey, L. Curtis (Powell, TN)

1993-01-01T23:59:59.000Z

424

Automated interferometric alignment system for paraboloidal mirrors  

DOE Patents [OSTI]

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aligning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront. 14 figures.

Maxey, L.C.

1993-09-28T23:59:59.000Z

425

Automated Verification of Practical Garbage Collectors  

E-Print Network [OSTI]

Garbage collectors are notoriously hard to verify, due to their low-level interaction with the underlying system and the general difficulty in reasoning about reachability in graphs. Several papers have presented verified collectors, but either the proofs were hand-written or the collectors were too simplistic to use on practical applications. In this work, we present two mechanically verified garbage collectors, both practical enough to use for real-world C# benchmarks. The collectors and their associated allocators consist of x86 assembly language instructions and macro instructions, annotated with preconditions, postconditions, invariants, and assertions. We used the Boogie verification generator and the Z3 automated theorem prover to verify this assembly language code mechanically. We provide measurements comparing the performance of the verified collector with that of the standard Bartok collectors on off-the-shelf C# benchmarks, demonstrating their competitiveness.

Hawblitzel, Chris

2010-01-01T23:59:59.000Z

426

Management issues in automated audit analysis  

SciTech Connect (OSTI)

This paper discusses management issues associated with the design and implementation of an automated audit analysis system that we use to detect security events. It gives the viewpoint of a team directly responsible for developing and managing such a system. We use Los Alamos National Laboratory`s Network Anomaly Detection and Intrusion Reporter (NADIR) as a case in point. We examine issues encountered at Los Alamos, detail our solutions to them, and where appropriate suggest general solutions. After providing an introduction to NADIR, we explore four general management issues: cost-benefit questions, privacy considerations, legal issues, and system integrity. Our experiences are of general interest both to security professionals and to anyone who may wish to implement a similar system. While NADIR investigates security events, the methods used and the management issues are potentially applicable to a broad range of complex systems. These include those used to audit credit card transactions, medical care payments, and procurement systems.

Jackson, K.A.; Hochberg, J.G.; Wilhelmy, S.K.; McClary, J.F.; Christoph, G.G.

1994-03-01T23:59:59.000Z

427

Test Automation with TTCN-3 -State of the Art and a Future Perspective  

E-Print Network [OSTI]

Test Automation with TTCN-3 - State of the Art and a Future Perspective Ina Schieferdecker TU.schieferdecker@fokus.fraunhofer.de Abstract. Test automation encompasses all activities to automate various steps in the overall testing process including automation of test management, test generation, or test execution. The standardized

Paris-Sud XI, Université de

428

DEVELOPMENT AND APPLICATION OF A NETWORK-BASED SHARED AUTOMATED VEHICLE MODEL IN AUSTIN, TEXAS  

E-Print Network [OSTI]

DEVELOPMENT AND APPLICATION OF A NETWORK-BASED SHARED AUTOMATED VEHICLE MODEL IN AUSTIN, TEXAS automated vehicle (SAV), combining features of short term rentals with the vehicles' powerful automated self. INTRODUCTION Vehicle automation appears poised to revolutionize the way in which we interface

Kockelman, Kara M.

429

Executive Summary Automation of driving functions is central to proposals for the design of an Auto-  

E-Print Network [OSTI]

for an Automated Vehicle/Highway System (AVHS) is safe? In particular, can we prove that there can be no high is equivalent to solving an optimal control problem. Keywords: Automated Vehicle/Highway System 1 Introduction Automation of driving functions is central to proposals for the design of an Automated Vehicle

Varaiya, Pravin

430

The State of the Art in Automation of Earthmoving Sanjiv Singh  

E-Print Network [OSTI]

The State of the Art in Automation of Earthmoving Sanjiv Singh System Scientist Robotics Institute automation of earthmoving machines, such as backhoes, loaders, and dozers, reflects a larger movement automated systems reported in the literature, can be classified. Key Words: automation, earthmoving

Singh, Sanjiv

431

Knowledge-Based Automation of a Design Method for Concurrent Systems  

E-Print Network [OSTI]

Knowledge-Based Automation of a Design Method for Concurrent Systems Kevin L. Mills, Senior Member to automate a software design method for concurrent systems. The approach uses multiple paradigms to represent-system shell, compose CODA, an automated designer's assistant. Other forms of automated reasoning

432

Between automation and exploration: SAS graphing techniques for visualization of survey data  

E-Print Network [OSTI]

Between automation and exploration: SAS graphing techniques for visualization of survey data Chong of survey data. There is always a tension between automation and exploration. Automation is a common to automate the graphing processes via SAS/Macros and SAS/Graph. However, hidden patterns of the data may

Yu, Alex

433

Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards  

E-Print Network [OSTI]

Automated  Demand  Response  in  Commercial  Buildings.  Demand  Response  Infrastructure  for   Commercial  Buildings.  

Ghatikar, Girish

2014-01-01T23:59:59.000Z

434

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network [OSTI]

Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

435

New Light Sources for Tomorrow's Lighting Designs  

E-Print Network [OSTI]

, pioneered for headlam~for the automotive industry, has led to the development of halo en capsule lamps for general lighting. The original90-watt family PAR 38 lamps using tungsten halogen capsules produces the sa amount of useful light in the beam as a I... quartz PAR lamps with similar benefi . Each of these tungsten halogen capsule PAR wattages are av ilable in narrow spot, spot, and flood beam patterns. The most recent developments in the PAR halogen psule family include two entirely new lamp designs...

Krailo, D. A.

436

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

437

LED Lighting Retrofit  

E-Print Network [OSTI]

? Municipal Street Lighting Consortium ? American Public Power Association (APPA) ? Demonstration in Energy Efficiency Development (DEED) ? Source of funding and database of completed LED roadway projects 6 Rules of the Road ESL-KT-11-11-57 CATEE 2011..., 2011 ? 9 Solar-Assisted LED Case Study LaQuinta Hotel, Cedar Park, Texas ? Utilizes 18 - ActiveLED Solar-Assisted Parking Lot Lights ? Utilizes ?power management? to extend battery life while handling light output ? Reduces load which reduces PV...

Shaw-Meadow, N.

2011-01-01T23:59:59.000Z

438

High efficiency incandescent lighting  

DOE Patents [OSTI]

Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

2014-09-02T23:59:59.000Z

439

Integration of Sensors with Embedded Data Acquisition for Automation of Lighting Analysis  

E-Print Network [OSTI]

-23, 2014 Energy Audit Benefits - 24 Centers - Over 16,000 assessments - Over 120,000 recommendations Average Recommended Savings: $77,000 http://iac.rutgers.edu/database/statistics/ ESL-IE-14-05-41 Proceedings of the Thrity-Sixth Industrial Energy... Determ P ug loads and t equipm nt Building Energy Simulation ut mat mod ling of a building s part of avigation Accur s hedul s and setpoi ts from measured data Can compare energy usage for many different types of retrofits. The autonomous...

Terrill, T. J.; Bay, C. J.; Rasmussen, B. P.

2014-01-01T23:59:59.000Z

440

Total Light Management  

Broader source: Energy.gov [DOE]

Presentation covers total light management, and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Lighting Technology Panel  

Broader source: Energy.gov [DOE]

Presentation covers the Lighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009. 

442

Comparing Light Bulbs  

Broader source: Energy.gov [DOE]

In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

443

Solid-State Lighting  

Broader source: Energy.gov (indexed) [DOE]

research and design. Quality LED luminaires require program designed to successfully move solid-state lighting precise design of several components -LED arrays, electronic into the...

444

LED ProspectsLED Prospects photometric units  

E-Print Network [OSTI]

/5/8 #12;16 Light bulb comparisonLight bulb comparison W lumens khours CRI $US Incandescent (long life) 75-life incandescent with LED. · 10 light fixtures/home, lights on for 6h/day, 333 days/yr. · Electricity 0.12 $/kWh. W khours $US Incandescent (long life) 100 10 2 LED (PAR38, warm, dimmable) 11 40 90 · What is the lifetime

Pulfrey, David L.

445

Human-automation collaborative RRT for UAV mission path planning  

E-Print Network [OSTI]

Future envisioned Unmanned Aerial Vehicle (UAV) missions will be carried out in dynamic and complex environments. Human-automation collaboration will be required in order to distribute the increased mission workload that ...

Caves, Américo De Jesús (Caves Corral)

2010-01-01T23:59:59.000Z

446

automated problem list: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

21 22 23 24 25 Next Page Last Page Topic Index 1 Linked Lists Binary trees OOP for Automation and Robotics Computer Technologies and Information Sciences Websites Summary: Linked...

447

assisted automated peritoneal: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

often do not lead to satisfactory results. Hollink, Vera 2011-01-01 4 HANDBOOK OF AUTOMATION (Springer, Editor: S.Nof) Computer-and robot-assisted medical interventions Physics...

448

automation elektronische ressource: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

automation elektronische ressource First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Sekretariat...

449

Design, Simulation, and Analysis of Substation Automation Networks  

E-Print Network [OSTI]

on the Substation Automation Systems (SAS). Substations are nodes in the smart grid infrastructure that help the in transportation of power by connecting the transmission and distribution lines. The SAS applications are con figured to operate with minimal human...

Kembanur Natarajan, Elangovan

2012-07-16T23:59:59.000Z

450

Radioanalytical Chemistry for Automated Nuclear Waste Process Monitoring  

SciTech Connect (OSTI)

The objectives of our research were to develop the first automated radiochemical process analyzer including sample pretreatment methodoology, and to initiate work on new detection approaches, especially using modified diode detectors.

Jay W. Grate; Timothy A. DeVol

2006-07-20T23:59:59.000Z

451

Design and implementation of an automated battery management platform  

E-Print Network [OSTI]

This thesis describes the design and the implementation of the hardware platform for automated battery management with battery changing/charging capability for autonomous UAV missions with persistency requirement that ...

Toksoz, Tuna

2012-01-01T23:59:59.000Z

452

Automated safety and training avionics for general aviation aircraft  

E-Print Network [OSTI]

rates involving these aircraft. In an attempt to improve safety factors and training programs for this aviation sector, researchers at Texas A&M University are investigating "smart cockpit systems." This research program is titled Automated Safety...

Trang, Jeffrey Alan

1997-01-01T23:59:59.000Z

453

An algebraic approach to automated geospatial information fusion  

E-Print Network [OSTI]

An algebraic approach to automated geospatial information fusion Matt Duckham , Mike Worboys using the example of geospatial land cover data. The method is then extended to operate under web. Keywords interoperability, qualitative spatial reasoning, geospatial ontology, uncer- tainty

Worboys, Mike

454

automation society ras: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering (T-ASE) February 2003: First Issue to appear in mid 2004. Executive Summary Automation plays an increasingly important role in the global economy and in our daily...

455

Automated Coordinator Synthesis for Mission Control of Autonomous Underwater Vehicles  

E-Print Network [OSTI]

Automated Coordinator Synthesis for Mission Control of Autonomous Underwater Vehicles S vehicles. The approach is aided by tools that allow graphical design, iterative redesign, and code autonomous underwater vehicle (AUV) programs to meet evolving requirements and capabilities. The hierarchical

Kumar, Ratnesh

456

automated assembly task: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

23 24 25 Next Page Last Page Topic Index 141 AABBSSTTRRAACCTT MA, RUIQI. The Effect of In-Vehicle Automation and Reliability on Driver Situation Engineering Websites Summary: and...

457

automated control traffic: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

technology, are to increase the safety and through-put of the existing highway by traffic automation. Advanced Vehicle Control... Huandra, Rusli 1998-01-01 14 Traffic Control on...

458

automated mixed traffic: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

technology, are to increase the safety and through-put of the existing highway by traffic automation. Advanced Vehicle Control... Huandra, Rusli 1998-01-01 46 Cognitive Engineering...

459

Automated Home Energy Management Standing Technical Committee Presentation  

Broader source: Energy.gov [DOE]

This presentation outlines the goals of the Automated Home Energy Management Standing Technical Committee, as presented at the Building America Spring 2012 Stakeholder meeting on February 29, 2012, in Austin, Texas.

460

automated classification software: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

while it is easy to use and efficient. Tim Menzies 45 Model-driven Automated Software FMEA Neal Snooke, PhD, Aberystwyth University Computer Technologies and Information Sciences...

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Automated construction technologies : analyses and future development strategies  

E-Print Network [OSTI]

Substandard productivity and the lack of skilled workers in the construction industry have led major corporations all over the world aiming to produce various types of automated construction technologies. During the process, ...

Hoang, Han (Han Mai)

2005-01-01T23:59:59.000Z

462

Evaluation Criteria for Human-Automation Performance Metrics  

E-Print Network [OSTI]

Previous research has identified broad metric classes for human-automation performance to facilitate metric selection, as well as understanding and comparison of research results. However, there is still lack of an objective ...

Pina, Patricia Elena

463

Summary of the 2006 Automated Demand Response Pilot  

E-Print Network [OSTI]

This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak...

Piette, M.; Kiliccote, S.

2007-01-01T23:59:59.000Z

464

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network [OSTI]

congress_1252d.pdf. EPRI. 2009. Automated DemandProject – Revision 1. EPRI. Palo Alto, California: 2009.DOE DR DRAS DRRC EIS EMCS EPRI FERC FM HASP ISO ISONE LBNL

Ghatikar, Girish

2010-01-01T23:59:59.000Z

465

Design Automation for Microfluidics-Based KRISHNENDU CHAKRABARTY  

E-Print Network [OSTI]

Design Automation for Microfluidics-Based Biochips KRISHNENDU CHAKRABARTY Duke University and JUN ZENG Coventor, Inc. Advances in microfluidics technology offer exciting possibilities in the realm, implantable drug delivery devices, and environmental toxicity monitoring. Microfluidics-based biochips

Chakrabarty, Krishnendu

466

HEADLINE: DOE Pursues Automation in West Virginia Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HEADLINE: DOE Pursues Automation in West Virginia Lab By Elizabeth McGowan Hakan Inan can envision a day in the near future when electric utilities will be able to find and isolate...

467

AUTOMATED UNDERWAY OCEANIC AND ATMOSPHERIC MEASUREMENTS FROM Shawn R. Smith  

E-Print Network [OSTI]

AUTOMATED UNDERWAY OCEANIC AND ATMOSPHERIC MEASUREMENTS FROM SHIPS Shawn R. Smith (1) , Mark A 32306-2840, USA, Emails: smith@coaps.fsu.edu, mbourassa@coaps.fsu.edu (2) CSIRO Land and Water, PO Box

Sprintall, Janet

468

An Optimization-Based Framework for Automated Market-Making  

E-Print Network [OSTI]

An Optimization-Based Framework for Automated Market-Making Jacob Abernethy EECS Department UC that copies are not made or distributed for profit or commercial advantage and that copies bear this notice

Chen, Yiling

469

automated paging system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Automated Web Page Synthesis in Adaptive Web Systems Computer Technologies and Information Sciences...

470

A Methodology for Automated Verification of Rosetta Specification Transformations  

E-Print Network [OSTI]

particular semantic vocabulary and modeling style. The following dissertation proposes a framework, semantics and methodology for automated verification of safety preservation over specification transformations between domains. Utilizing the ideas of lattice...

Lohoefener, Jennifer Lee

2011-04-11T23:59:59.000Z

471

Demand Response and Open Automated Demand Response Opportunities for Data Centers  

SciTech Connect (OSTI)

This study examines data center characteristics, loads, control systems, and technologies to identify demand response (DR) and automated DR (Open Auto-DR) opportunities and challenges. The study was performed in collaboration with technology experts, industrial partners, and data center facility managers and existing research on commercial and industrial DR was collected and analyzed. The results suggest that data centers, with significant and rapidly growing energy use, have significant DR potential. Because data centers are highly automated, they are excellent candidates for Open Auto-DR. 'Non-mission-critical' data centers are the most likely candidates for early adoption of DR. Data center site infrastructure DR strategies have been well studied for other commercial buildings; however, DR strategies for information technology (IT) infrastructure have not been studied extensively. The largest opportunity for DR or load reduction in data centers is in the use of virtualization to reduce IT equipment energy use, which correspondingly reduces facility cooling loads. DR strategies could also be deployed for data center lighting, and heating, ventilation, and air conditioning. Additional studies and demonstrations are needed to quantify benefits to data centers of participating in DR and to address concerns about DR's possible impact on data center performance or quality of service and equipment life span.

Ghatikar, Girish; Piette, Mary Ann; Fujita, Sydny; McKane, Aimee; Dudley, Junqiao Han; Radspieler, Anthony; Mares, K.C.; Shroyer, Dave

2009-12-30T23:59:59.000Z

472

OpenGL Lighting 13. OpenGL Lighting  

E-Print Network [OSTI]

OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

McDowell, Perry

473

Automated characterization of single-photon avalanche photodiode  

E-Print Network [OSTI]

We report an automated characterization of a single-photon detector based on commercial silicon avalanche photodiode (PerkinElmer C30902SH). The photodiode is characterized by I-V curves at different illumination levels (darkness, 10 pW and 10 uW), dark count rate and photon detection efficiency at different bias voltages. The automated characterization routine is implemented in C++ running on a Linux computer.

Aina M. M. Ghazali; Audun N. Bugge; Sebastien Sauge; Vadim Makarov

2012-02-08T23:59:59.000Z

474

A Distributed Facilities Automation System For IBM Buildings  

E-Print Network [OSTI]

to the host would be via an IBM-supplied local communications network protocol. Remote appli cations would include process control, security, energy manage ment, facilities automation or any other automation application. The remote systems... of these areas which are affected are: - HVAC - Chemical Processes Control - Utilities Generation - Tank Farm Monitoring Resource Management - Solvent Supply and Recovery Systems - DI Water Distribution - Sewage and Waste Treatment Plant Control...

Houle, W. D. Sr.

475

Automated Vehicle Articulation and Animation: A Maxscript Approach  

E-Print Network [OSTI]

AUTOMATED VEHICLE ARTICULATION AND ANIMATION: A MAXSCRIPT APPROACH A Thesis by CHRISTOPHER COREY GRIFFIN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 2010 Major Subject: Visualization Sciences AUTOMATED VEHICLE ARTICULATION AND ANIMATION: A MAXSCRIPT APPROACH A Thesis by CHRISTOPHER GRIFFIN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment...

Griffin, Christopher Corey

2011-02-22T23:59:59.000Z

476

Light intensity compressor  

DOE Patents [OSTI]

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

477

Splayed mirror light pipes  

SciTech Connect (OSTI)

An expression is given for the transmission of the rectangular-section mirror light pipe. The expression is used to model throughputs for simulated solar conditions over a calender year. It is found that the splaying of a mirror light pipe results in a significant increase in throughputs particularly in winter months. (author)

Swift, P.D. [School of Physical Sciences, Dublin City University, Dublin 9 (Ireland)

2010-02-15T23:59:59.000Z

478

Explosively pumped laser light  

DOE Patents [OSTI]

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

479

Reducing home lighting expenses  

SciTech Connect (OSTI)

Ways to reduce lighting expenses are summarized. These include: turning off lights when not in use; keeping fixtures and lamps clean; replacing lamps with more efficient types; using three-way bulbs; use of daylighting; buying fewer lamps and reducing lamp wattage; consider repainting rooms; replacing recessed fixtures with tracklighting; and using efficient lamps for outdoor use. (MCW)

Aimone, M.A.

1981-02-01T23:59:59.000Z

480

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

SciTech Connect (OSTI)

Wastewater treatment is an energy intensive process which, together with water treatment, comprises about three percent of U.S. annual energy use. Yet, since wastewater treatment facilities are often peripheral to major electricity-using industries, they are frequently an overlooked area for automated demand response opportunities. Demand response is a set of actions taken to reduce electric loads when contingencies, such as emergencies or congestion, occur that threaten supply-demand balance, and/or market conditions occur that raise electric supply costs. Demand response programs are designed to improve the reliability of the electric grid and to lower the use of electricity during peak times to reduce the total system costs. Open automated demand response is a set of continuous, open communication signals and systems provided over the Internet to allow facilities to automate their demand response activities without the need for manual actions. Automated demand response strategies can be implemented as an enhanced use of upgraded equipment and facility control strategies installed as energy efficiency measures. Conversely, installation of controls to support automated demand response may result in improved energy efficiency through real-time access to operational data. This paper argues that the implementation of energy efficiency opportunities in wastewater treatment facilities creates a base for achieving successful demand reductions. This paper characterizes energy use and the state of demand response readiness in wastewater treatment facilities and outlines automated demand response opportunities.

Thompson, Lisa; Song, Katherine; Lekov, Alex; McKane, Aimee

2008-11-19T23:59:59.000Z

Note: This page contains sample records for the topic "dimmable lighting automated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Assessment of the Applicability of Cooperative Vehicle-Highway Automation Systems to Bus Transit and Intermodal Freight: Case Study Feasibility Analyses in the Metropolitan Chicago Region  

E-Print Network [OSTI]

it is a form of vehicle automation that could be implementedare developed. For full automation, vehicle-roadway wirelessof Cooperative Vehicle-Highway Automation Systems to Bus

2004-01-01T23:59:59.000Z

482

Follicular unit extraction hair transplant automation: Options in overcoming challenges of the latest technology in hair restoration with the goal of avoiding the line scar  

E-Print Network [OSTI]

extraction hair transplant automation: Options in overcomingis also required [ 4 ]. Automation of various steps of FUEFor example, with automation, increased harvest numbers are

Rashid, Rashid M; Bicknell, Lindsay T Morgan

2012-01-01T23:59:59.000Z

483

Automated high pressure cell for pressure jump x-ray diffraction  

SciTech Connect (OSTI)

A high pressure cell for small and wide-angle x-ray diffraction measurements of soft condensed matter samples has been developed, incorporating a fully automated pressure generating network. The system allows both static and pressure jump measurements in the range of 0.1-500 MPa. Pressure jumps can be performed as quickly as 5 ms, both with increasing and decreasing pressures. Pressure is generated by a motorized high pressure pump, and the system is controlled remotely via a graphical user interface to allow operation by a broad user base, many of whom may have little previous experience of high pressure technology. Samples are loaded through a dedicated port allowing the x-ray windows to remain in place throughout an experiment; this facilitates accurate subtraction of background scattering. The system has been designed specifically for use at beamline I22 at the Diamond Light Source, United Kingdom, and has been fully integrated with the I22 beamline control systems.

Brooks, Nicholas J.; Gauthe, Beatrice L. L. E.; Templer, Richard H.; Ces, Oscar; Seddon, John M. [Department of Chemistry, Imperial College London, South Kensington Campus, London SW7 2AZ (United Kingdom); Terrill, Nick J. [Diamond Light Source, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0DE (United Kingdom); Rogers, Sarah E. [ISIS, Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0QX (United Kingdom)

2010-06-15T23:59:59.000Z

484

Initial Results from an Automated High Spectral  

E-Print Network [OSTI]

. P. Hedrick, and J.P. Garcia University of Wisconsin 1225 W. Dayton Street, Madison Wisconsin 53706 for continuous remote untended operation as an Internet appliance. - Transceiver Design: Laser light goes through Measurements: Calibrated measurements begin at z=75 m. - Narrow field-of-view: Nearly eliminates solar

Eloranta, Edwin W.

485

International Journal of Industrial Ergonomics 36 (2006) 511526 A dynamic model of interaction between reliance on automation and  

E-Print Network [OSTI]

between reliance on automation and cooperation in multi-operator multi-automation situations Ji Gaoa elements of automation. The success of such multi-operator multi-automation systems depends not only on individual operator's appropriate use of automation, but also on cooperation between operators. Inappropriate

Lee, John D.

486

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS  

E-Print Network [OSTI]

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

Fisher, Kathleen

487

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

Jacobs, David

488

Automation of Network-Based Scientific Workflows  

SciTech Connect (OSTI)

Comprehensive, end-to-end, data and workflow management solutions are needed to handle the increasing complexity of processes and data volumes associated with modern distributed scientific problem solving, such as ultra-scale simulations and high-throughput experiments. The key to the solution is an integrated network-based framework that is functional, dependable, fault-tolerant, and supports data and process provenance. Such a framework needs to make development and use of application workflows dramatically easier so that scientists' efforts can shift away from data management and utility software development to scientific research and discovery An integrated view of these activities is provided by the notion of scientific workflows - a series of structured activities and computations that arise in scientific problem-solving. An information technology framework that supports scientific workflows is the Ptolemy II based environment called Kepler. This paper discusses the issues associated with practical automation of scientific processes and workflows and illustrates this with workflows developed using the Kepler framework and tools.

Altintas, I. [University of California, La Jolla; Barreto, R. [Oak Ridge National Laboratory (ORNL); Blondin, J. M. [North Carolina State University; Cheng, Z. [North Carolina State University; Critchlow, T. [Lawrence Livermore National Laboratory (LLNL); Khan, A. [University of Utah; Klasky, Scott A [ORNL; Ligon, J. [North Carolina State University; Ludaescher, B. [University of California, Davis; Mouallem, P. A. [North Carolina State University; Parker, S. [University of Utah; Podhorszki, Norbert [University of California, Davis; Shoshani, A. [Lawrence Berkeley National Laboratory (LBNL); Silva, C. [University of Utah; Vouk, M. A. [North Carolina State University

2007-01-01T23:59:59.000Z

489

Automation Enhancement of Multilayer Laue Lenses  

SciTech Connect (OSTI)

X-ray optics fabrication at Brookhaven National Laboratory has been facilitated by a new, state of the art magnetron sputtering physical deposition system. With its nine magnetron sputtering cathodes and substrate carrier that moves on a linear rail via a UHV brushless linear servo motor, the system is capable of accurately depositing the many thousands of layers necessary for multilayer Laue lenses. I have engineered a versatile and automated control program from scratch for the base system and many subsystems. Its main features include a custom scripting language, a fully customizable graphical user interface, wireless and remote control, and a terminal-based interface. This control system has already been successfully used in the creation of many types of x-ray optics, including several thousand layer multilayer Laue lenses.Before reaching the point at which a deposition can be run, stencil-like masks for the sputtering cathodes must be created to ensure the proper distribution of sputtered atoms. Quality of multilayer Laue lenses can also be difficult to measure, given the size of the thin film layers. I employ my knowledge of software and algorithms to further ease these previously painstaking processes with custom programs. Additionally, I will give an overview of an x-ray optic simulator package I helped develop during the summer of 2010. In the interest of keeping my software free and open, I have worked mostly with the multiplatform Python and the PyQt application framework, utilizing C and C++ where necessary.

Lauer K. R.; Conley R.

2010-12-01T23:59:59.000Z

490

Chip breaking system for automated machine tool  

DOE Patents [OSTI]

The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

1987-01-01T23:59:59.000Z

491

Green Light Pulse Oximeter  

DOE Patents [OSTI]

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

492

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

493

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

494

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

495

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

496

Lakeview Light and Power- Commercial Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

497

Light Vector Mesons  

E-Print Network [OSTI]

This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

Alexander Milov

2008-12-21T23:59:59.000Z

498

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

499

Efficient Light Sources Today  

E-Print Network [OSTI]

This paper reviews new lamp and lighting technology in terms of application and economic impact. Included are the latest advances in High Intensity Discharge systems, energy saving fluorescent lamps and ballasts, and the new state of the art high...

Hart, A. L.

1982-01-01T23:59:59.000Z

500

Natural lighting and skylights  

E-Print Network [OSTI]

outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting....

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z