National Library of Energy BETA

Sample records for diesel-electric hybrid passenger

  1. On-Board Diesel & Hybrid Diesel-Electric Transit Bus PM

    E-Print Network [OSTI]

    Holmén, Britt A.

    On-Board Diesel & Hybrid Diesel-Electric Transit Bus PM Mass and Size-Resolved Number Emissions AND cost-effective ­ 2003 -- Purchase 2 hybrid diesel-electric buses ­ Emissions Testing ­ gases Particulate Mass -- filter #12;Motivation · Ultrafine (UF) particle health effects · Diesel vehicle exhaust

  2. Advanced Hybrid Propulsion and Energy Management System for High Efficiency, Off Highway, 240 Ton Class, Diesel Electric Haul Trucks

    SciTech Connect (OSTI)

    Richter, Tim; Slezak, Lee; Johnson, Chris; Young, Henry; Funcannon, Dan

    2008-12-31

    The objective of this project is to reduce the fuel consumption of off-highway vehicles, specifically large tonnage mine haul trucks. A hybrid energy storage and management system will be added to a conventional diesel-electric truck that will allow capture of braking energy normally dissipated in grid resistors as heat. The captured energy will be used during acceleration and motoring, reducing the diesel engine load, thus conserving fuel. The project will work towards a system validation of the hybrid system by first selecting an energy storage subsystem and energy management subsystem. Laboratory testing at a subscale level will evaluate these selections and then a full-scale laboratory test will be performed. After the subsystems have been proven at the full-scale lab, equipment will be mounted on a mine haul truck and integrated with the vehicle systems. The integrated hybrid components will be exercised to show functionality, capability, and fuel economy impacts in a mine setting.

  3. Emissions from Medium-Duty Conventional and Diesel-Electric Hybrid Vehicles; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Ragatz, A.; Duran, A.; Thornton, M.; Walkowicz, K.

    2014-04-02

    This presentation discusses the results of emissions testing for medium-duty conventional and diesel-electric hybrid vehicles. Testing was based on a field evaluation approach that utilized the Fleet DNA drive cycle database and NREL’s Renewable Fuels and Lubricants (ReFUEL) Laboratory chassis dynamometer. Vehicles tested included parcel delivery (Class 6 step vans), beverage delivery (Class 8 tractors), and parcel delivery (Class 7 box trucks) vehicles, all with intended service class medium/heavy heavy-duty diesel (MHDD).
    Results for fuel economy and tailpipe NOx emissions included: diesel hybrid electric vehicles showed an average fuel economy advantage on identified test cycles: Class 6 Step Vans: 26%; Class 7 Box Trucks: 24.7%; Class 8 Tractors: 17.3%. Vehicle miles traveled is an important factor in determining total petroleum and CO2 displacement. Higher NOx emissions were observed over some test cycles: highly drive cycle dependent; engine-out differences may result from different engine operating point; and selective catalyst reduction temperature may play a role, but does not explain the whole story.

  4. Coca-Cola Refreshments Class 8 Diesel Electric Hybrid Tractor Evaluation: 13-Month Final Report

    SciTech Connect (OSTI)

    Walkowicz, K.; Lammert, M.; Curran, P.

    2012-08-01

    This 13-month evaluation used five Kenworth T370 hybrid tractors and five Freightliner M2106 standard diesel tractors at a Coca Cola Refreshments facility in Miami, Florida. The primary objective was to evaluate the fuel economy, emissions, and operational field performance of hybrid electric vehicles when compared to similar-use conventional diesel vehicles. A random dispatch system ensures the vehicles are used in a similar manner. GPS logging, fueling, and maintenance records and laboratory dynamometer testing are used to evaluate the performance of these hybrid tractors. Both groups drive similar duty cycles with similar kinetic intensity (0.95 vs. 0.69), average speed (20.6 vs. 24.3 mph), and stops per mile (1.9 vs. 1.5). The study demonstrated the hybrid group had a 13.7% fuel economy improvement over the diesel group. Laboratory fuel economy and field fuel economy study showed similar trends along the range of KI and stops per mile. Hybrid maintenance costs were 51% lower per mile; hybrid fuel costs per mile were 12% less than for the diesels; and hybrid vehicle total cost of operation per mile was 24% less than the cost of operation for the diesel group.

  5. Optimization and Control of a Hydro-Mechanical Transmission based Hybrid Hydraulic Passenger Vehicle

    E-Print Network [OSTI]

    Li, Perry Y.

    Optimization and Control of a Hydro-Mechanical Transmission based Hybrid Hydraulic Passenger of Minnesota, Minneapolis, USA ABSTRACT Hydro-mechanical transmission (HMT) based hybrid hydraulic vehicle

  6. Evaluation of Greenhouse Gas and Criteria Emissions From Conventional and Hybrid Off-Road Equipment

    E-Print Network [OSTI]

    Cao, Tanfeng

    2014-01-01

    Class 8 Diesel Electric Hybrid Tractor Evaluation: 13-MonthClass 8 Diesel Electric Hybrid Tractor Evaluation: 13-MonthClass 8 Diesel Electric Hybrid Tractor Evaluation: 13-Month

  7. ANALYSIS AND CONTROL DESIGN OF A HYDRO-MECHANICAL HYDRAULIC HYBRID PASSENGER VEHICLE

    E-Print Network [OSTI]

    Li, Perry Y.

    ANALYSIS AND CONTROL DESIGN OF A HYDRO-MECHANICAL HYDRAULIC HYBRID PASSENGER VEHICLE Teck Ping, Sim@me.umn.edu ABSTRACT This paper gives the dynamic analysis of a hydro- mechanical transmission (HMT) drive train passenger vehicle with a hydro-mechanical transmission (HMT) drive train with regeneration and indepen- dent

  8. Optimal Design of Power-Split Transmissions for Hydraulic Hybrid Passenger Vehicles

    E-Print Network [OSTI]

    Li, Perry Y.

    Optimal Design of Power-Split Transmissions for Hydraulic Hybrid Passenger Vehicles Kai Loon Cheong, Perry Y. Li and Thomas R. Chase Abstract-- Hydraulic hybrid vehicles are inherently power dense. Power-split or hydro-mechanical transmissions (HMT) have advantages over series and parallel architectures

  9. Near term hybrid passenger vehicle development program. Phase I. Appendices A and B. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    In this report vehicle use patterns or missions are defined and studied. The three most promising missions were found to be: all-purpose city driving which has the maximum potential market penetration; commuting which requires mainly a two-passenger car; and family and civic business driving which have minimal range requirements. The mission selection process was based principally on an analysis of the travel patterns found in the Nationwide Transportation Survey and on the Los Angeles and Washington, DC origin-destination studies data presented by General Research Corporation in Volume II of this report. Travel patterns in turn were converted to fuel requirements for 1985 conventional and hybrid cars. By this means the potential fuel savings for each mission were estimated, and preliminary design requirements for hybrid vehicles were derived.

  10. Phase I of the Near-Term Hybrid Passenger-Vehicle Development Program. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-10-01

    Under contract to the Jet Propulsion Laboratory of the California Institute of Technology, Minicars conducted Phase I of the Near-Term Hybrid Passenger Vehicle (NTHV) Development Program. This program led to the preliminary design of a hybrid (electric and internal combustion engine powered) vehicle and fulfilled the objectives set by JPL. JPL requested that the report address certain specific topics. A brief summary of all Phase I activities is given initially; the hybrid vehicle preliminary design is described in Sections 4, 5, and 6. Table 2 of the Summary lists performance projections for the overall vehicle and some of its subsystems. Section 4.5 gives references to the more-detailed design information found in the Preliminary Design Data Package (Appendix C). Alternative hybrid-vehicle design options are discussed in Sections 3 through 6. A listing of the tradeoff study alternatives is included in Section 3. Computer simulations are discussed in Section 9. Section 8 describes the supporting economic analyses. Reliability and safety considerations are discussed specifically in Section 7 and are mentioned in Sections 4, 5, and 6. Section 10 lists conclusions and recommendations arrived at during the performance of Phase I. A complete bibliography follows the list of references.

  11. Scenario-Based Fault-Tolerant Model Predictive Control for Diesel-Electric Marine Power Plant

    E-Print Network [OSTI]

    Johansen, Tor Arne

    Scenario-Based Fault-Tolerant Model Predictive Control for Diesel-Electric Marine Power Plant Email: torstein.bo@itk.ntnu.no, tor.arne.johansen@itk.ntnu.no Abstract--Diesel-electric propulsion generation control, Ma- rine safety, Optimal control. I. INTRODUCTION Diesel electric propulsion is a system

  12. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    The parallel hybrid passenger car (VW Golf) combined an EDLCpassenger cars using the ultracapacitors in micro-hybrid,passenger car using both carbon/carbon and hybrid carbon

  13. Near term hybrid passenger vehicle development program. Phase I. Appendices C and D. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    The derivation of and actual preliminary design of the Near Term Hybrid Vehicle (NTHV) are presented. The NTHV uses a modified GM Citation body, a VW Rabbit turbocharged diesel engine, a 24KW compound dc electric motor, a modified GM automatic transmission, and an on-board computer for transmission control. The following NTHV information is presented: the results of the trade-off studies are summarized; the overall vehicle design; the selection of the design concept and the base vehicle (the Chevrolet Citation), the battery pack configuration, structural modifications, occupant protection, vehicle dynamics, and aerodynamics; the powertrain design, including the transmission, coupling devices, engine, motor, accessory drive, and powertrain integration; the motor controller; the battery type, duty cycle, charger, and thermal requirements; the control system (electronics); the identification of requirements, software algorithm requirements, processor selection and system design, sensor and actuator characteristics, displays, diagnostics, and other topics; environmental system including heating, air conditioning, and compressor drive; the specifications, weight breakdown, and energy consumption measures; advanced technology components, and the data sources and assumptions used. (LCL)

  14. Dynamic Positioning System as Dynamic Energy Storage on Diesel-Electric Ships

    E-Print Network [OSTI]

    Johansen, Tor Arne

    1 Dynamic Positioning System as Dynamic Energy Storage on Diesel-Electric Ships Tor A. Johansen in order to implement energy storage in the kinetic and potential energy of the ship motion using the DP in order to relate the dynamic energy storage capacity to the maximum allowed ship position deviation

  15. Coca-Cola Refreshments Class 8 Diesel Electric Hybrid Tractor Evaluation: 13-Month Final Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D BGene NetworkNuclearDNP 20082 P r o jJ.Coal toCobalt

  16. AT GUANTANAMO BAY: A HYBRID WIND-DIESEL SYSTEM

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    WIND POWER AT GUANTANAMO BAY: A HYBRID WIND-DIESEL SYSTEM FOR THE US NAVY AT GUANTANAMO NAVAL BASE Laboratory and are actively developing what will be the world's largest wind-diesel hybrid electric plant. The pending installation of four 950-kW wind turbines to supplement the 22.8 MW diesel electricity plant

  17. Electrochemical Capacitors as Energy Storage in Hybrid-Electric Vehicles: Present Status and Future Prospects

    E-Print Network [OSTI]

    Burke, Andy; Miller, Marshall

    2009-01-01

    passenger cars using the ultracapacitors in micro-hybrid,passenger car using both carbon/carbon and hybrid carbonhybrid vehicle designs and operating strategies are shown in Table 1 for a mid-size passenger car.

  18. robust passenger oriented airline scheduling

    E-Print Network [OSTI]

    Luis

    2010-10-29

    decision-making process, referred to as airline schedule planning. ... the future passenger demand on each market is of priority concern in the planning ..... Disrupted passengers are passengers that the company does not attend due to lack of.

  19. Bus Rapid Transit (BRT): An Efficient and Competitive Mode of Public Transport

    E-Print Network [OSTI]

    Cervero, Robert

    2013-01-01

    and  Seattle,  diesel-­?hybrid  buses  are  operated.    Seattle  uses  diesel-­?electric   hybrid  buses,  which  s   Civis  feature  hybrid  diesel-­?electric  articulated  

  20. Strategies and Technologies for Improving Air Quality Around Ports

    E-Print Network [OSTI]

    Khan, Mohammad Yusuf

    2013-01-01

    on fossil fuels. Diesel electrical hybrid systems have also7-1: Diesel Electric Drive Train on the Hybrid Campbell FossThe diesel electric drive train on the hybrid tug that

  1. Analytical Framework to Evaluate Emission Control Systems for Marine Engines

    E-Print Network [OSTI]

    Jayaram, Varalakshmi

    2010-01-01

    P. ; Balon, T. H. , Hybrid Diesel-Electric Heavy Duty Busbenefits of a diesel-electric hybrid tug were characterized.a multi- powered diesel-electric hybrid system. viii Table

  2. Proceedings of the 2002 Advanced Vehicle Control Conference, Hiroshima, Japan, September 2002 Control of a Hybrid Electric Truck Based on Driving

    E-Print Network [OSTI]

    Peng, Huei

    initiated, aiming to duplicate the success of hybrid powertrain on passenger cars to light and heavy trucks demonstrated by several prototype hybrid passenger cars, produced by the PNGV program, will be an unrealistic Control of a Hybrid Electric Truck Based on Driving Pattern Recognition Chan-Chiao Lin, Huei Peng Soonil

  3. Thermoelectric Waste Heat Recovery Program for Passenger Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste Heat Recovery Program for Passenger Vehicles Thermoelectric Waste Heat Recovery Program for Passenger Vehicles 2012 DOE Hydrogen and Fuel Cells Program and Vehicle...

  4. Control system design for a parallel hybrid electric vehicle 

    E-Print Network [OSTI]

    Buntin, David Leighton

    1994-01-01

    This thesis addresses the design of control systems for a parallel hybrid electric drive train which is an alternative to conventional passenger vehicles. The principle components of the drive train are a small internal combustion engine...

  5. An Analysis of Air Passenger Average Trip Lengths and Fare Levels in US Domestic Markets

    E-Print Network [OSTI]

    Huang, Sheng-Chen Alex

    2000-01-01

    California at Berkeley An Analysis of Air Passenger AverageCalifornia at Berkeley An Analysis of Air Passenger Average

  6. Tarmac delay policies : a passenger-centric analysis

    E-Print Network [OSTI]

    Vanderboll, Allison Elizabeth (Allison Sunny Elizabeth)

    2013-01-01

    In this work, we analyze the effectiveness of the 2010 Tarmac Delay Rule from a passenger-centric point of view. The Tarmac Delay Rule aims to protect enplaned passengers on commercial aircraft from excessively long delays ...

  7. Vehicle hydraulic system that provides heat for passenger compartment

    DOE Patents [OSTI]

    Bartley, Bradley E. (Manito, IL); Blass, James R. (Bloomington, IL); Gibson, Dennis H. (Chillicothe, IL)

    2001-01-01

    A vehicle includes a vehicle housing which defines a passenger compartment. Attached to the vehicle housing is a hydraulic system, that includes a hydraulic fluid which flows through at least one passageway within the hydraulic system. Also attached to the vehicle housing is a passenger compartment heating system. The passenger compartment heating system includes a heat exchanger, wherein a portion of the heat exchanger is a segment of the at least one passageway of the hydraulic system.

  8. Advances in Diesel Engine Technologies for European Passenger...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies for European Passenger Vehicles 2002 DEER Conference Presentation: Volkswagen AG 2002deerschindler.pdf More Documents & Publications Accelerating Light-Duty...

  9. Transportation Network Modeling in Passenger Transportation

    E-Print Network [OSTI]

    Daniels, Thomas E.

    , Cars (hybrid and gasoline) ­ Trains (electric and diesel) ­ Barges ­ Planes · Decision Variables - Modeled (infrastructure not taken into account) VDxxGasoline car Hybrid car GD M$/M gallon M gallon Infrastructure Demand Decision Variables Status - Personal vehicles Cars/ Gasoline & electricity Highway

  10. Adaptation of hybrid five-phase ABS algorithms for experimental validation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    -lock braking, Hybrid control systems, Limit cycle analysis, Experimental validation, Quarter-car. 1Adaptation of hybrid five-phase ABS algorithms for experimental validation Mathieu Gerard WilliamAnti-lock Braking System (ABS) is the most important active safety system for passenger cars, but unfortunately

  11. Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive

    E-Print Network [OSTI]

    Van de Ven, James D.

    Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel of a passenger car. The developed hydro-mechanical drive train enables independent control of the torque at each for the Center for Compact and Efficient Fluid Power at the University of Minnesota. The hydro-mechanical hybrid

  12. Hybrid Identities

    E-Print Network [OSTI]

    Montclair, Sani

    2012-01-01

    Hybrid Identity; Family, Photography and History in Colonialintersectional politics of hybrid identity is the primarycreated a distinctively hybrid culture, one where language,

  13. Wankel engine for hybrid powertrain

    SciTech Connect (OSTI)

    Butti, A.; Site, V.D.

    1995-12-31

    The Wankel engine is suited to be used to drive hybrid propulsion systems. The main disadvantage of hybrid propulsion systems is the complexity that causes a high weight and large dimensions. For these reason hybrid systems are more suitable for large size vehicle (buses, vans) rather than for small passenger cars. A considerable reduction of hybrid systems weight and dimensions can be obtained using a Wankel rotary engine instead of a conventional engine. The Wankel engine is light, compact, simple, and produces low noise and low vibrations. Therefore a Wankel engine powered hybrid system is suited to be used on small cars. In this paper a 1,000 kg parallel hybrid car with continuously variable transmission and a 6,000 kg series hybrid minibus both equipped with Wankel engines are considered. The Wankel engine works at steady state to minimize fuel consumption and exhaust emissions. The simulation of the behavior of these two vehicles during a ECE + EUDC test cycle is presented in order to evaluate the performances of the systems.

  14. Modeling and simulations of electrical energy storage in electrochemical capacitors

    E-Print Network [OSTI]

    Wang, Hainan

    2013-01-01

    from Ref. [1]) and (b) hybrid diesel/electric rubber-tiredhybrid bus and a diesel/electric hybrid gantry cranehybrid bus (taken from Ref. [ 1]) and (b) hy- brid diesel/

  15. Driving Pattern Recognition for Control of Hybrid Electric Trucks

    E-Print Network [OSTI]

    Peng, Huei

    strategy is to minimize fuel consumption and engine-out NOx and PM emissions on a set of diversified is selected adaptively. This "multi-mode" control scheme was tested on several driving cycles and was found was initiated, aiming to duplicate the success of the hybrid powertrain on passenger cars to light and heavy

  16. Transfer passenger needs at airports : human factors in terminal design

    E-Print Network [OSTI]

    Brillembourg, Marie-Claire

    1982-01-01

    This thesis analyzes the needs of particular users of airport: transfer passengers. The object of this work has been to produce a set of design guidelines for terminals. these guidelines are framed upon a user-need survey ...

  17. Passenger-to-train assignment model based on automated data

    E-Print Network [OSTI]

    Zhu, Yiwen, S.M. Massachusetts Institute of Technology

    2014-01-01

    This thesis aims at developing a methodology for assigning passengers to individual trains using: (i) fare transaction records from Automatic Fare Collection (AFC) system and (ii) the train tracking data from Automatic ...

  18. Modeling the interaction between passenger cars and trucks 

    E-Print Network [OSTI]

    Jenkins, Jacqueline Marie

    2004-11-15

    The topic of this dissertation was the use of distributed computing to improve the modeling of the interaction between passenger cars and trucks. The two main focus areas were the development of a methodology to combine microscopic traffic...

  19. The Analysis of Right-of-way for different road users in China: Passing-Passenger-Unit Versus Passenger-Car-Unit 

    E-Print Network [OSTI]

    Xiong, Wen Professor; Zhang, Yuanyuan PhD; Chen, Xiaohong Professor; Jiang, Chao

    2014-01-01

    on According g to Car Cong gestion Ext ternality. Jou rnalUNIT VERSUS PASSENGER-CAR-UNIT Wen Xiong, Associatebased on the Passenger-Car-Unit (PCU) concept. However, this

  20. Prioritizing Climate Change Mitigation Alternatives: Comparing Transportation Technologies to Options in Other Sectors

    E-Print Network [OSTI]

    Lutsey, Nicholas P.

    2008-01-01

    Future Potential of Hybrid and Diesel Powertrains in theas advanced parallel hybrid (gas or diesel) electric vehiclee.g. hybrid gasoline-electric vs. diesel vehicles). Dealing

  1. Multi-Materials Vehicle R&D Initiative Lightweight 7+ Passenger...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials Vehicle R&D Initiative Lightweight 7+ Passenger Vehicle Multi-Materials Vehicle R&D Initiative Lightweight 7+ Passenger Vehicle 2011 DOE Hydrogen and Fuel Cells Program,...

  2. Proceedings of the 2002 Advanced Vehicle Control Conference, Hiroshima, Japan, September 2002 Control of a Hybrid Electric Truck Based on Driving

    E-Print Network [OSTI]

    Peng, Huei

    initiated, aiming to duplicate the success of hybrid powertrain on passenger cars to light and heavy trucks Control of a Hybrid Electric Truck Based on Driving Pattern Recognition Chan-Chiao Lin, Huei Peng Soonil. The 21st Century Truck program in the US, spearheaded by two government agencies, Department of Energy

  3. An analysis of casual carpool passenger behavior in Houston, Texas 

    E-Print Network [OSTI]

    Winn, Justin Ray

    2005-08-29

    .......................................................24 3.2 Casual Carpool Passenger Counts, June 19, 2003 ................................................ 25 3.3 Katy Freeway Data Collection Sections................................................................ 27 3.4 Northwest Freeway... vehicle occupancies by providing a travel time savings to carpools (1). HOV lanes are typically built on congested freeways, and allow vehicles that meet specified occupancy requirements to bypass the delays associated with driving alone on the general...

  4. Taiwan High Speed Rail Keeping passenger safety at the forefront

    E-Print Network [OSTI]

    Taiwan High Speed Rail Keeping passenger safety at the forefront Overview The Need Taiwan High, high-speed travel in Taiwan." -- Ming-Der Lee, manager of Maintenance Management Information Systems, Taiwan High Speed Rail Corporation Like a few countries, life on the island nation of Taiwan is shaped

  5. Passenger life-saving in a badly damaged aircraft scenario

    E-Print Network [OSTI]

    Alexander Bolonkin

    2007-03-28

    Offered is a new method for saving passenger lives in any catastrofic situation, including total failure of aircraft control, extreme damage and loss aircraft wings, tail, breakdown all propelling engines, etc. It shown here that previous works which have proposed using only parachutes are useless because their proposers failed to consider the likely overload of the parachute jerk stress (at the moment of parachute release) and the impact of aircraft on Earth surface. These jeck and impact destroy aircraft and kill passengers. Offered is a connected series of related technical innovations which overcome these obvious difficalties and allow for a soft, near zero speed landing in any topographically suitable place, allowing potential to save aircraft. This method may be applied to all existing airplanes and increases their weight only about 1.5 - 2.5%. Also, the method may be used for vertically landing the already built aircraft, for example, when any runway is damaged or would become overloaded.

  6. Assessing the Role of Operating, Passenger, and Infrastructure Costs in Fleet Planning under Fuel Price Uncertainty

    E-Print Network [OSTI]

    Smirti, Megan; Hansen, Mark

    2009-01-01

    the at summer 2008 fuel prices, regional jets have a higherstage lengths and fuel prices, passenger preferences for jetabsence of a fuel price increase, because smaller jets would

  7. Environmental Life-cycle Assessment of Passenger Transportation: A Detailed Methodology for Energy, Greenhouse Gas and Criteria Pollutant Inventories of Automobiles, Buses, Light Rail, Heavy Rail and Air

    E-Print Network [OSTI]

    Chester, Mikhail; Horvath, Arpad

    2007-01-01

    Consulting, Inc. , 9/2002 Life-cycle Assessment of PassengerChronicle, 11/24/2006 Life-cycle Assessment of PassengerLarge Large Large Large Life-cycle Assessment of Passenger

  8. Environmental Life-cycle Assessment of Passenger Transportation: A Detailed Methodology for Energy, Greenhouse Gas and Criteria Pollutant Inventories of Automobiles, Buses, Light Rail, Heavy Rail and Air

    E-Print Network [OSTI]

    Chester, Mikhail; Horvath, Arpad

    2007-01-01

    Consulting, Inc. , 9/2002 Life-cycle Assessment of PassengerLarge Large Large Large Life-cycle Assessment of PassengerChronicle, 11/24/2006 Life-cycle Assessment of Passenger

  9. Intermodal passenger flows on London's public transport network : automated inference of full passenger journeys using fare-transaction and vehicle-location data

    E-Print Network [OSTI]

    Gordon, Jason B. (Jason Benjamin)

    2012-01-01

    Urban public transport providers have historically planned and managed their networks and services with limited knowledge of their customers' travel patterns. While ticket gates and bus fareboxes yield counts of passenger ...

  10. BEHAVIORAL DISTINCTIONS: THE USE OF LIGHT-DUTY TRUCKS AND PASSENGER CARS

    E-Print Network [OSTI]

    Kockelman, Kara M.

    BEHAVIORAL DISTINCTIONS: THE USE OF LIGHT-DUTY TRUCKS AND PASSENGER CARS by Kara Maria Kockelman as light-duty trucks (LDTs), resulting in a variety of regulatory protections. Production and purchase as light-duty trucks (LDTs), and they currently capture 51% of new U.S. passenger vehicle sales1 ­ much

  11. Hybrid Mesons

    E-Print Network [OSTI]

    C. A. Meyer; E. S. Swanson

    2015-03-04

    A review of the theoretical and experimental status of hybrid hadrons is presented. The states $\\pi_1(1400)$, $\\pi_1(1600)$, and $\\pi_1(2015)$ are thoroughly reviewed, along with experimental results from GAMS, VES, Obelix, COMPASS, KEK, CLEO, Crystal Barrel, CLAS, and BNL. Theoretical lattice results on the gluelump spectrum, adiabatic potentials, heavy and light hybrids, and transition matrix elements are discussed. These are compared with bag, string, flux tube, and constituent gluon models. Strong and electromagnetic decay models are described and compared to lattice gauge theory results. We conclude that while good evidence for the existence of a light isovector exotic meson exists, its confirmation as a hybrid meson awaits discovery of its iso-partners. We also conclude that lattice gauge theory rules out a number of hybrid models and provides a reference to judge the success of others.

  12. Development of turbocharger for improving passenger car acceleration

    SciTech Connect (OSTI)

    Watanabe, Tsuyoshi; Koike, Takaaki; Furukawa, Hiromu; Ikeya, Nobuyuki; Sakakida, Masaru

    1996-09-01

    Recently, passenger cars require better acceleration from low engine speed including starting-up in order to decrease the amount of particulate matter (PM) of diesel engines or to improve the driver`s feeling. However, turbocharged cars generally have worse response than the non turbo cars because it takes a few seconds to get the turbocharger rotate up to high speed, usually called Turbo-lag. In order to solve this, various technologies have been developed for a turbocharger itself as well as for charging system such as the sequential system. Here in this paper, the authors focus on the development of the following turbocharger technology to reduce Turbo-lag and to achieve better transient response.

  13. Overview of LightweightingMaterials: Past, Present and FutureMaterials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    diesel-electric hybrids), advanced design and lightweighting (40%), probably spurred automotive technology worldwide, and provided model for government-industry cooperation....

  14. Ballistic Resistance of Armored Passenger Vehicles: Test Protocols and Quality Methods

    SciTech Connect (OSTI)

    Jeffrey M. Lacy; Robert E. Polk

    2005-07-01

    This guide establishes a test methodology for determining the overall ballistic resistance of the passenger compartment of assembled nontactical armored passenger vehicles (APVs). Because ballistic testing of every piece of every component of an armored vehicle is impractical, if not impossible, this guide describes a testing scheme based on statistical sampling of exposed component surface areas. Results from the test of the sampled points are combined to form a test score that reflects the probability of ballistic penetration into the passenger compartment of the vehicle.

  15. An investigation of the information needs of air passengers traveling to the airport 

    E-Print Network [OSTI]

    Burdette, Debra Arlene

    2000-01-01

    and thus would have adequate time to evaluate their options. Finally, based on the survey results, air passengers indicated they would prefer to use e-mail, pagers, telephones, and the Internet when making future travel information inquiries...

  16. The evolution of passenger accessibility in the US airline industry, 1980-2010

    E-Print Network [OSTI]

    Jenkins, James Joseph, M.C.P. Massachusetts Institute of Technology

    2011-01-01

    Since deregulation, passenger air travel and the airline industry as a whole have changed dramatically. While most previous research has focused on the changes experienced by the airlines, this thesis seeks to understand ...

  17. THE FUTURE DEMAND FOR ALTERNATIVE FUEL PASSENGER VEHICLES: A DIFFUSION OF INNOVATION APPROACH

    E-Print Network [OSTI]

    Levinson, David M.

    ..............................................................................................................27 3.1.2 Natural Gas Vehicles ..........................................................................................................26 3.1.1 Liquefied Petroleum Gas VehiclesTHE FUTURE DEMAND FOR ALTERNATIVE FUEL PASSENGER VEHICLES: A DIFFUSION OF INNOVATION APPROACH UC

  18. Examining changes in transit passenger travel behavior through a Smart Card activity analysis

    E-Print Network [OSTI]

    Mojica, Carlos H

    2008-01-01

    Transit passenger behavior is an area of major interest for public transportation agencies. The relationship between ridership and maintenance projects, however, is unexplored but increasingly relevant in the era of aging ...

  19. Assessing the Role of Operating, Passenger, and Infrastructure Costs in Fleet Planning under Fuel Price Uncertainty

    E-Print Network [OSTI]

    Smirti, Megan; Hansen, Mark

    2009-01-01

    ATA) Quarterly Cost Index: U.S. Passenger Airlines. http://fuel, termed Jet A, and the cost index in cents per gallon.The cost index, as defined by the Air Transportation

  20. Real-World Emissions from Model Year 1993, 2000, and 2010 Passenger Cars

    E-Print Network [OSTI]

    Ross, M.

    2010-01-01

    Properly-Functioning Cars Emissions are relatively high whenmay exaggerate p-car emissions; in effect, the cutpoint mayFederal passenger car tailpipe emission standards at 50,000

  1. Estimating train passenger load from automated data systems : application to London Underground

    E-Print Network [OSTI]

    Paul, Elizabeth Cheriyamadam

    2010-01-01

    The purpose of this thesis is to assess the feasibility of identifying which trains individual passengers take to get from their origin to destination while travelling in a high frequency urban rail transportation system. ...

  2. Development of Improved Traveler Survey Methods for High-Speed Intercity Passenger Rail Planning 

    E-Print Network [OSTI]

    Sperry, Benjamin

    2012-07-16

    in this dissertation, ridership estimates for new high-speed intercity passenger rail lines that are planned to serve intermediate communities should not assume that residents of these communities have similar characteristics and values. The d-efficient stated...

  3. A unified approach to semi-autonomous control of passenger vehicles in hazard avoidance scenarios

    E-Print Network [OSTI]

    Iagnemma, Karl

    This paper describes the design of unified active safety framework that combines trajectory planning, threat assessment, and semi-autonomous control of passenger vehicles into a single constrained-optimal-control-based ...

  4. An empirical study of planning and scheduling interactions in the road passenger transportation domain

    E-Print Network [OSTI]

    Qu, Rong

    An empirical study of planning and scheduling interactions in the road passenger transportation between planning and scheduling in a specific scenario, road pas- senger transportation. The problem (what planning analyzes). The relative change consists of slightingly decreasing the energy level

  5. Fuel and emission impacts of heavy hybrid vehicles.

    SciTech Connect (OSTI)

    An, F.; Eberhardt, J. J.; Stodolsky, F.

    1999-03-02

    Hybrid powertrains for certain heavy vehicles may improve fuel economy and reduce emissions. Of particular interest are commercial vehicles, typically in Classes 3-6, that travel in urban areas. Hybrid strategies and associated energy/emissions benefits for these classes of vehicles could be significantly different from those for passenger cars. A preliminary analysis has been conducted to investigate the energy and emissions performance of Class 3 and 6 medium-duty trucks and Class 6 school buses under eight different test cycles. Three elements are associated with this analysis: (1) establish baseline fuel consumption and emission scenario's from selected, representative baseline vehicles and driving schedules; (2) identify sources of energy inefficiency from baseline technology vehicles; and (3) assess maximum and practical potentials for energy savings and emissions reductions associated with heavy vehicle hybridization under real-world driving conditions. Our analysis excludes efficiency gains associated with such other measures as vehicle weight reduction and air resistance reduction, because such measures would also benefit conventional technology vehicles. Our research indicates that fuel economy and emission benefits of hybridization can be very sensitive to different test cycles. We conclude that, on the basis of present-day technology, the potential fuel economy gains average about 60-75% for Class 3 medium-duty trucks and 35% for Class 6 school buses. The fuel economy gains can be higher in the future, as hybrid technology continues to improve. The practical emissions reduction potentials associated with vehicle hybridization are significant as well.

  6. Scenario analysis of hybrid class 3-7 heavy vehicles.

    SciTech Connect (OSTI)

    An, F.; Stodolsky, F.; Vyas, A.; Cuenca, R.; Eberhardt, J. J.

    1999-12-23

    The effects of hybridization on heavy-duty vehicles are not well understood. Heavy vehicles represent a broader range of applications than light-duty vehicles, resulting in a wide variety of chassis and engine combinations, as well as diverse driving conditions. Thus, the strategies, incremental costs, and energy/emission benefits associated with hybridizing heavy vehicles could differ significantly from those for passenger cars. Using a modal energy and emissions model, they quantify the potential energy savings of hybridizing commercial Class 3-7 heavy vehicles, analyze hybrid configuration scenarios, and estimate the associated investment cost and payback time. From the analysis, they conclude that (1) hybridization can significantly reduce energy consumption of Class 3-7 heavy vehicles under urban driving conditions; (2) the grid-independent, conventional vehicle (CV)-like hybrid is more cost-effective than the grid-dependent, electric vehicle (EV)-like hybrid, and the parallel configuration is more cost-effective than the series configuration; (3) for CV-like hybridization, the on-board engine can be significantly downsized, with a gasoline or diesel engine used for SUVs perhaps being a good candidate for an on-board engine; (4) over the long term, the incremental cost of a CV-like, parallel-configured Class 3-4 hybrid heavy vehicle is about %5,800 in the year 2005 and $3,000 in 2020, while for a Class 6-7 truck, it is about $7,100 in 2005 and $3,300 in 2020; and (5) investment payback time, which depends on the specific type and application of the vehicle, averages about 6 years under urban driving conditions in 2005 and 2--3 years in 2020.

  7. Hybrid Mesons

    E-Print Network [OSTI]

    Bernhard Ketzer

    2012-08-25

    The SU(3)_flavor constituent quark model has been quite successful to explain the properties as well as the observed spectrum of mesons with pseudoscalar and vector quantum numbers. Many radial and orbital excitations of quark-antiquark systems predicted by the model, however, have not yet been observed experimentally or assigned unambiguously. In addition, a much richer spectrum of mesons is expected from QCD, in which quarks interact which each other through the exchange of colored self-interacting gluons. Owing to this particular structure of QCD, configurations are allowed in which an excited gluonic field contributes to the quantum numbers J^{PC} of the meson. States with a valence color-octet qqbar' pair neutralized in color by an excited gluon field are termed hybrids. The observation of such states, however, is difficult because they will mix with ordinary qqbar' states with the same quantum numbers, merely augmenting the observed spectrum for a given J^{PC}. Since the gluonic field may carry quantum numbers other than 0^{++}, however, this can give rise to states with "exotic" quantum numbers J^{PC}=0^{--}, 0^{+-}, 1^{-+}, 2^{+-},... The lowest-lying hybrid multiplet is expected to contain a state with exotic quantum numbers J^{PC}=1^{-+}. The identification of such a state is considered a "smoking gun" for the observation of non-qqbar mesons. The search for hybrid states has been a central goal of hadron spectroscopy in the last 20 years. Ongoing and upcoming high-statistics experiments are expected to shed new light on the existence of such states in nature. In this paper, theoretical predictions for masses and decay modes as well as recent experimental evidence for hybrid meson states and future experimental directions are discussed.

  8. Hybrid type checking

    E-Print Network [OSTI]

    Flanagan, C

    2006-01-01

    O’Callahan and J. -D. Choi. Hybrid dynamic data race detec-subtyping is sound, the hybrid compilation algorithmHybrid Type Checking Cormac Flanagan Department of Computer

  9. Hybrid Vapor Compression Adsorption System: Thermal Storage Using Hybrid Vapor Compression Adsorption System

    SciTech Connect (OSTI)

    2012-01-04

    HEATS Project: UTRC is developing a new climate-control system for EVs that uses a hybrid vapor compression adsorption system with thermal energy storage. The targeted, closed system will use energy during the battery-charging step to recharge the thermal storage, and it will use minimal power to provide cooling or heating to the cabin during a drive cycle. The team will use a unique approach of absorbing a refrigerant on a metal salt, which will create a lightweight, high-energy-density refrigerant. This unique working pair can operate indefinitely as a traditional vapor compression heat pump using electrical energy, if desired. The project will deliver a hot-and-cold battery that provides comfort to the passengers using minimal power, substantially extending the driving range of EVs.

  10. Indoor air quality control for improving passenger health in subway platforms using an outdoor air quality dependent ventilation system

    E-Print Network [OSTI]

    Indoor air quality control for improving passenger health in subway platforms using an outdoor air online 19 May 2015 Keywords: Ventilation control system Indoor air quality Indoor air pollution control Outdoor air quality Passenger health promotion Ventilation energy a b s t r a c t Indoor air quality (IAQ

  11. The Passenger Safety Project at the Texas A&M AgriLife Extension Service works to reduce deaths and

    E-Print Network [OSTI]

    killed and 462 were injured every day in the United States in motor vehicle crashes during 2012 have a higher crash incidence and death rate than urban areas. Response The Passenger Safety ProjectThe Passenger Safety Project at the Texas A&M AgriLife Extension Service works to reduce deaths

  12. Potential for meeting the EU new passenger car CO? emissions targets

    E-Print Network [OSTI]

    Bhatt, Kandarp

    2011-01-01

    In 2009, the European Parliament agreed to limit the CO2 emissions from new passenger cars sold in the European Union to an average of 130g/km by 2015. Further, a probable longer-term CO2 emissions target of 95g/km is ...

  13. Supplement for "Secondary organic aerosol1 formation from idling gasoline passenger vehicle2

    E-Print Network [OSTI]

    Meskhidze, Nicholas

    40 °C. This facilitates evaporation and1 degradation of organic contaminants on the chamber walls passenger vehicles were tested at idling, the three cars selected8 represented three different European emission classes. All tested vehicles used three way9 catalysts. In the idling case, the cars were driven

  14. Ridesharing with Passenger Transfers Brian Coltin1 and Manuela Veloso1

    E-Print Network [OSTI]

    Veloso, Manuela M.

    destination, filling empty seats to conserve fuel, reduce pollution and split costs. This process will become between vehicles. Our focus is on finding fast, sub-optimal algorithms to plan driver routes of multiple vehicles, passengers can travel further at less inconvenience to drivers (see Figure 1

  15. Transit Smart Card Data Mining for Passenger Origin Information Graduate Research Assistant

    E-Print Network [OSTI]

    Washington at Seattle, University of

    Transit Smart Card Data Mining for Passenger Origin Information Extraction Xiaolei Ma Graduate inherent advantages in low labor cost and high efficiency for fare collection and transaction data archival. Although it is possible to collect highly valuable data from transit SC transactions, substantial efforts

  16. Flight Path and Wing Optimization of Lithium-Air Battery Powered Passenger Aircraft

    E-Print Network [OSTI]

    Alonso, Juan J.

    in the design of electrically-driven aircraft, particularly in the case of fuel cells and batteries.5­7 One to implement vis. a vis. fuel cells, in particular, liquid hydrogen fuel cells. However, present-day batteryFlight Path and Wing Optimization of Lithium-Air Battery Powered Passenger Aircraft J. Michael Vegh

  17. Applying engineering and fleet detail to represent passenger vehicle transport in

    E-Print Network [OSTI]

    efficiency Alternative fuel vehicles A well-known challenge in computable general equilibrium (CGE) modelsApplying engineering and fleet detail to represent passenger vehicle transport in a computable for Global Change Science (CGCS) and the Center for Energy and Environmental Policy Research (CEEPR

  18. Mobile Journey Planning for Bus Passengers Desmond Rainsford and William A Mackaness

    E-Print Network [OSTI]

    in the area of Location Based Services (LBS) is the delivery of journey plans to a mobile device. Few journey over mobile devices. The application is novel in the modelling of the pedestrian elements1 Mobile Journey Planning for Bus Passengers Desmond Rainsford and William A Mackaness Geography

  19. Hybrid and multifield inflation

    E-Print Network [OSTI]

    Sfakianakis, Evangelos I

    2014-01-01

    In this thesis I study the generation of density perturbations in two classes of inflationary models: hybrid inflation and multifield inflation with non-minimal coupling to gravity. In the case of hybrid inflation, we ...

  20. Hybrid Power Test Bed

    SciTech Connect (OSTI)

    NONE

    1996-06-01

    This document describes efforts by the National Renewable Energy Laboratory to simulate hybrid power systems. Hybrid power systems combine multiple power sources such as wind turbines, photovoltaic (PV) arrays, diesel generators, and battery storage systems. They typically are used in remote areas, away from major electric grids. The Hybrid Power Test Bed is designed to assist the U.S. wind industry in developing and testing hybrid power generation systems. Test bed capabilities, features, and equipment are described.

  1. Mesoscale hybrid calibration artifact

    SciTech Connect (OSTI)

    Tran, Hy D. (Albuquerque, NM); Claudet, Andre A. (Albuquerque, NM); Oliver, Andrew D. (Waltham, MA)

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  2. Hybrid Systems Frits Vaandrager

    E-Print Network [OSTI]

    Vaandrager, Frits

    on these data, the computer may decide to turn on a heating system, switch off a pump, etc. When a dangerous1 Hybrid Systems Frits Vaandrager 1 Introduction Hybrid systems are systems that intermix discrete. The specification, design and analysis of hybrid systems require a synthesis of ideas, concepts, mathe­ matical

  3. Hybrid armature projectile

    DOE Patents [OSTI]

    Hawke, Ronald S. (Livermore, CA); Asay, James R. (Los Lunas, NM); Hall, Clint A. (Albuquerque, NM); Konrad, Carl H. (Albuquerque, NM); Sauve, Gerald L. (Berthoud, CO); Shahinpoor, Mohsen (Albuquerque, NM); Susoeff, Allan R. (Pleasanton, CA)

    1993-01-01

    A projectile for a railgun that uses a hybrid armature and provides a seed block around part of the outer surface of the projectile to seed the hybrid plasma brush. In addition, the hybrid armature is continuously vaporized to replenish plasma in a plasma armature to provide a tandem armature and provides a unique ridge and groove to reduce plasama blowby.

  4. Corn Hybrid Virginia Corn &

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Virginia Corn Hybrid and Management Trials 2007 Virginia Corn & Small Grain Management #12;VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS IN 2007 Coordinators of Virginia Corn Hybrid Trials in 2007 Wade Thomason, Extension Specialist, Department of Crop and Soil Environmental Sciences, Virginia Tech Harry

  5. Corn Hybrid Virginia Corn &

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Virginia Corn Hybrid Management and Trials 2006 Virginia Corn & Small Grain Management #12;#12;Virginia Corn Hybrid and Management Trials 2006 Coordinators of Virginia Corn Hybrid Trials in 2006 Wade Thomason, Extension Specialist, Department of Crop and Soil Environmental Sciences, Virginia Tech Harry

  6. Assessment of the potential diversion of air passengers to high-speed rail in the northeast corridor

    E-Print Network [OSTI]

    Clarke, Michael D. D.

    1994-01-01

    The high level of intercity passenger travel in the Northeast Corridor is supported by densely populated metropolitan city-centers, the suitable distance between the urban areas, and the extent to which economic and social ...

  7. Climate and energy policy for U.S. passenger vehicles : a technology-rich economic modeling and policy analysis

    E-Print Network [OSTI]

    Karplus, Valerie J

    2011-01-01

    Climate and energy security concerns have prompted policy action in the United States and abroad to reduce petroleum use and greenhouse gas (GHG) emissions from passenger vehicles. Policy affects the decisions of firms and ...

  8. Performance Characteristics of Coal-to-Liquids (CTL) Diesel in a 50-State Emissions Compliant Passenger Car

    Office of Energy Efficiency and Renewable Energy (EERE)

    Comparisons between CTL, GTL, no. 2, and European diesel include fuel economy, regulated and unregulated emissions in a 50 State compliant passenger car with DOC, NOx adsorber and particulate trap

  9. Using Vehicle Taxes to Reduce Carbon Dioxide Emissions Rates of New Passenger Vehicles: Evidence from France, Germany, and Sweden

    E-Print Network [OSTI]

    Klier, Thomas

    France, Germany, and Sweden link vehicle taxes to the carbon dioxide (CO2) emissions rates of passenger vehicles. Based on new vehicle registration data from 2005–2010, a vehicle’s tax is negatively correlated with its ...

  10. Cars on a diet : the material and energy impacts of passenger vehicle weight reduction in the U.S.

    E-Print Network [OSTI]

    Cheah, Lynette W. (Lynette Wan Ting)

    2010-01-01

    Vehicle weight reduction is a known strategy to address growing concerns about greenhouse gas emissions and fuel use by passenger vehicles. We find that every 10% reduction in vehicle weight can cut fuel consumption by ...

  11. Bus passenger origin-destination estimation and travel behavior using automated data collection systems in London, UK

    E-Print Network [OSTI]

    Wang, Wei, S.M. Massachusetts Institute of Technology

    2010-01-01

    This research explores the application of archived data from Automatic Data Collection Systems (ADCS) to transportation planning with a focus on bus passenger Origin-Destination (OD) inferences at the bus-route level and ...

  12. Balancing China's Seasonal Intercity Travel Demand: Alternatives for Freight Rail Expansion to Reduce Seasonal Passenger Rail Demand

    E-Print Network [OSTI]

    Li, Lingling

    2013-12-31

    overwhelmedintercity transportation systems, particularly passenger rail. This transportation problem has emerged due to spatial economic imbalance: workers have had to travel betweentheir homes in rural hinterlands to factory jobs on the industrial coast, which had...

  13. The hydrogen hybrid option

    SciTech Connect (OSTI)

    Smith, J.R.

    1993-10-15

    The energy efficiency of various piston engine options for series hybrid automobiles are compared with conventional, battery powered electric, and proton exchange membrane (PEM) fuel cell hybrid automobiles. Gasoline, compressed natural gas (CNG), and hydrogen are considered for these hybrids. The engine and fuel comparisons are done on a basis of equal vehicle weight, drag, and rolling resistance. The relative emissions of these various fueled vehicle options are also presented. It is concluded that a highly optimized, hydrogen fueled, piston engine, series electric hybrid automobile will have efficiency comparable to a similar fuel cell hybrid automobile and will have fewer total emissions than the battery powered vehicle, even without a catalyst.

  14. Policy effectiveness for road passenger transport emissions reductions across the world

    E-Print Network [OSTI]

    Mercure, J -F

    2014-01-01

    The effectiveness of policy for emissions reductions in private passenger road transport depends on its ability to incentivise consumers to make choices oriented towards lower emissions vehicles. However, car purchase choices are known to be strongly socially determined, and this sector is highly diverse due to significant socio-economic differences between consumer groups. Here, we present a comprehensive analysis of the structure of the 2012 private passenger vehicle fleet-years in six major economies across the World (UK, USA, China, India, Japan and Brazil) in terms of prices, engine sizes and emissions. This is done in order to evaluate the effectiveness of existing and possible fiscal and technological change policies for emissions reductions. We provide tools to understand and evaluate the effectiveness of policy taking account of the distributive structure of prices and emissions in segments of a diverse market, both for conventional as well as unconventional engine technologies. We furthermore explai...

  15. Commercial viability of hybrid vehicles : best household use and cross national considerations.

    SciTech Connect (OSTI)

    Santini, D. J.; Vyas, A. D.

    1999-07-16

    Japanese automakers have introduced hybrid passenger cars in Japan and will soon do so in the US. In this paper, we report how we used early computer simulation model results to compare the commercial viability of a hypothetical near-term (next decade) hybrid mid-size passenger car configuration under varying fuel price and driving patterns. The fuel prices and driving patterns evaluated are designed to span likely values for major OECD nations. Two types of models are used. One allows the ''design'' of a hybrid to a specified set of performance requirements and the prediction of fuel economy under a number of possible driving patterns (called driving cycles). Another provides an estimate of the incremental cost of the hybrid in comparison to a comparably performing conventional vehicle. In this paper, the models are applied to predict the NPV cost of conventional gasoline-fueled vehicles vs. parallel hybrid vehicles. The parallel hybrids are assumed to (1) be produced at high volume, (2) use nickel metal hydride battery packs, and (3) have high-strength steel bodies. The conventional vehicle also is assumed to have a high-strength steel body. The simulated vehicles are held constant in many respects, including 0-60 time, engine type, aerodynamic drag coefficient, tire rolling resistance, and frontal area. The hybrids analyzed use the minimum size battery pack and motor to meet specified 0-60 times. A key characteristic affecting commercial viability is noted and quantified: that hybrids achieve the most pronounced fuel economy increase (best use) in slow, average-speed, stop-and-go driving, but when households consistently drive these vehicles under these conditions, they tend to travel fewer miles than average vehicles. We find that hours driven is a more valuable measure than miles. Estimates are developed concerning hours of use of household vehicles versus driving cycle, and the pattern of minimum NPV incremental cost (or benefit) of selecting the hybrid over the conventional vehicle at various fuel prices is illustrated. These results are based on data from various OECD motions on fuel price, annual miles of travel per vehicle, and driving cycles assumed to be applicable in those nations. Scatter in results plotted as a function of average speed, related to details of driving cycles and the vehicles selected for analysis, is discussed.

  16. Environmental Life-cycle Assessment of Passenger Transportation An Energy, Greenhouse Gas, and Criteria Pollutant Inventory of Rail and Air Transportation

    E-Print Network [OSTI]

    Horvath, Arpad; Chester, Mikhail

    2008-01-01

    A. , Environmental Life-cycle Assessment of PassengerAnalysis-Based Life-cycle Assessment. Software. Carnegieframework for life cycle assessments, 1991, SETAC. [Fritz

  17. Powertrain Controls Optimization for HD Hybrid Line Haul Trucks - FY2014 Annual Report

    SciTech Connect (OSTI)

    Smith, David E.

    2014-12-01

    This is a vehicle system level project, encompassing analytical modeling and supervisory controls development as well as experimental verification/validation testing at the component, powertrain, and full vehicle system level. This project supports the goal of petroleum consumption reduction for medium and heavy trucks through the development of advanced hybrid technologies and control systems. VSST has invested previously in R&D to support hybrid energy storage systems (Li-ion plus ultra-caps) for light duty, passenger car applications. This research will be extended to the MD and HD sector where current battery technology is not mature enough to handle the substantial regenerative braking power levels these trucks are capable of producing. With this hybrid energy storage system, substantial gains in overall vehicle efficiency are possible. In addition, advanced combustion technologies, such as RCCI, will be implemented into an advanced hybrid powertrain for a Class 8 line haul application. This powertrain, leveraged from other VSST work (Meritor, a current ORNL/VSST partner), is ideal for taking advantage of the benefits of RCCI operation due to its series hybrid mode of operation. Emissions control is also a focus of this project, especially due to the fact that RCCI creates a low temperature exhaust stream that must addressed.

  18. ULEV potential of a DI/TCI diesel passenger car engine operated on dimethyl ether

    SciTech Connect (OSTI)

    Kapus, P.E.; Cartellieri, W.P.

    1995-12-31

    This paper describes a feasibility test program on a 2 liter, 4 cylinder DI/TCI passenger car engine operated on the new alternative fuel Dimethyl Ether (DME) with the aim of demonstrating its potential of meeting ULEV (ultra low emission vehicle) emissions (0.2 g/mi NOx in the FTP 75 test cycle) when installed in a full size passenger car. Special attention is drawn to the fuel injection equipment (FIE) as well as combustion system requirements towards the reduction of NOx and combustion noise while keeping energetic fuel consumption at the level of he baseline DI/TCI diesel engine. FIE and combustion system parameters were optimized on the steady state dynamometer by variation of a number of parameters, such as rate of injection, number of nozzle holes, compression ratio, piston bowl shape and exhaust gas recirculation. The paper presents engine test results achieved with DME under various operating conditions and compares these results to those achieved with the diesel version of the same engine.The FTP 75 cycle results were projected from steady state engine maps using a vehicle simulation program taking into account vehicle data and road resistance data of a given vehicle.The cycle results are also compared to actual chassis dynamometer results achieved with the diesel version of the same engine installed in the same vehicle.the passenger car DI/TCI engine adapted for and operated on DME shows very promising results with respect to meeting ULEV NOx emissions without any soot emissions and without the need for a DENOX catalyst. DME fuel consumption on energy basis can be kept very close to the DI diesel value. An oxidation catalyst will be necessary to meet the stringent CO and HC ULEV emission limits.

  19. Formula Hybrid International Competition

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    , and computerized control systems. But the greatest obstacle of all was that hybrid cars could not meet newlyFormula Hybrid International Competition May 4, 5, 6, 2009 #12;09 annual third We are thrilled to have 30 cars competing this year. The competition is the result of the hard work of many people

  20. Hybrid Quantum Cloning Machine

    E-Print Network [OSTI]

    Satyabrata Adhikari; A. K. Pati; Indranil Chakrabarty; B. S. Choudhury

    2007-06-14

    In this work, we introduce a special kind of quantum cloning machine called Hybrid quantum cloning machine. The introduced Hybrid quantum cloning machine or transformation is nothing but a combination of pre-existing quantum cloning transformations. In this sense it creates its own identity in the field of quantum cloners. Hybrid quantum cloning machine can be of two types: (i) State dependent and (ii) State independent or Universal. We study here the above two types of Hybrid quantum cloning machines. Later we will show that the state dependent hybrid quantum-cloning machine can be applied on only four input states. We will also find in this paper another asymmetric universal quantum cloning machine constructed from the combination of optimal universal B-H quantum cloning machine and universal anti-cloning machine. The fidelities of the two outputs are different and their values lie in the neighborhood of ${5/6} $

  1. Hybrid Automata-based CEGAR for Rectangular Hybrid Systems

    E-Print Network [OSTI]

    Liberzon, Daniel

    Hybrid Automata-based CEGAR for Rectangular Hybrid Systems Pavithra Prabhakar, Sridhar Duggirala- example guided abstraction-refinement (CEGAR) for systems modelled as rectangular hybrid automata. The main difference, between our ap- proach and previous proposals for CEGAR for hybrid automata

  2. HYBRID LIMIT CYCLES AND HYBRID POINCARE-BENDIXSON

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    HYBRID LIMIT CYCLES AND HYBRID POINCAR´E-BENDIXSON Slobodan N. Simi´c Department of Electrical regular hybrid systems with no branching (Simi´c et al., 2000a). The first one provides a condition for asymptotic stability of hybrid closed orbits in terms of contraction-expansion rates of resets and flows

  3. Hybrid 2012 Innovative Hybrid Approaches to the Processing of

    E-Print Network [OSTI]

    EACL 2012 Hybrid 2012 Innovative Hybrid Approaches to the Processing of Textual Data Proceedings@aclweb.org ii #12;Introduction The hybrid approach term covers a large set of situations in which different of the dedicated task. Hybrid approaches are commonly used in various NLP applications (i.e., automatic creation

  4. Hybrid Systems State estimation for hybrid systems: applications

    E-Print Network [OSTI]

    Tomlin, Claire

    Hybrid Systems State estimation for hybrid systems: applications to aircraft tracking I. Hwang, H of a stochastic linear hybrid system, given only the continuous system output data, is studied. Well established techniques for hybrid estimation, known as the multiple model adaptive estimation algorithm

  5. EVOLUTION OF L HYBRID WAVES

    E-Print Network [OSTI]

    Karney, Charles

    . INTRODUCTIO In typical lower hybrid heating schemes, lower hybrid waves are launched at the wall sf tokamak. In this paper we study the C numerically, and determine the consequences of our results for lower hybrid heating hybrid heating of a tokamak. 11. THE CMKDV EQUAT The two-dimensional steady-state propagation of a single

  6. Hybrid matrix fiber composites

    DOE Patents [OSTI]

    Deteresa, Steven J.; Lyon, Richard E.; Groves, Scott E.

    2003-07-15

    Hybrid matrix fiber composites having enhanced compressive performance as well as enhanced stiffness, toughness and durability suitable for compression-critical applications. The methods for producing the fiber composites using matrix hybridization. The hybrid matrix fiber composites include two chemically or physically bonded matrix materials, whereas the first matrix materials are used to impregnate multi-filament fibers formed into ribbons and the second matrix material is placed around and between the fiber ribbons that are impregnated with the first matrix material and both matrix materials are cured and solidified.

  7. Introduction Hybrid ICNs

    E-Print Network [OSTI]

    Schenato, Luca

    analysis Experimental results Conclusion Real-Time Networks and Protocols for Industrial Automation Lucia-Time Networks & Protocols for Industrial Automation Hybrid ICNs Modeling of real wireless components IEEE 802 Simulative analysis Experimental results Conclusion Industrial Communication Networks Nowadays Industrial

  8. Assimilating hybridized architecture

    E-Print Network [OSTI]

    Wu, Jane C., 1977-

    2005-01-01

    The thesis searches for means of operation to deal with hybridized architecture. As a conceptual framework, sociology theory appears to be an insightful precedent, for it analyzes and classifies how multiple constituents ...

  9. Heavy Hybrid mesons Masses

    E-Print Network [OSTI]

    F. Iddir; L. Semlala

    2006-11-25

    We estimate the ground state masses of the heavy hybrid mesons using a phenomenological QCD-type potential. 0^{- -},1^{- -},0^{- +},1^{- +} and 0^{+ -} J^{PC} states are considered.

  10. Hybrid adsorptive membrane reactor

    DOE Patents [OSTI]

    Tsotsis, Theodore T. (Huntington Beach, CA); Sahimi, Muhammad (Altadena, CA); Fayyaz-Najafi, Babak (Richmond, CA); Harale, Aadesh (Los Angeles, CA); Park, Byoung-Gi (Yeosu, KR); Liu, Paul K. T. (Lafayette Hill, PA)

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  11. Diesel hybridization and emissions.

    SciTech Connect (OSTI)

    Pasquier, M.; Monnet, G.

    2004-04-21

    The CTR Vehicle Systems and Fuels team a diesel hybrid powertrain. The goal of this experiment was to investigate and demonstrate the potential of diesel engines for hybrid electric vehicles (HEVs) in a fuel economy and emissions. The test set-up consisted of a diesel engine coupled to an electric motor driving a Continuously Variable Transmission (CVT). This hybrid drive is connected to a dynamometer and a DC electrical power source creating a vehicle context by combining advanced computer models and emulation techniques. The experiment focuses on the impact of the hybrid control strategy on fuel economy and emissions-in particular, nitrogen oxides (NO{sub x}) and particulate matter (PM). The same hardware and test procedure were used throughout the entire experiment to assess the impact of different control approaches.

  12. Hybrid models of transport in crowded environments

    E-Print Network [OSTI]

    Battiato, Ilenia

    2010-01-01

    6.2.5 Hybrid algorithm . . . . . . . . . . . . . . .88 Chapter 5 Hybrid Model for Reactive Flow in a5.3.1 Hybrid validation . . . . . . . . . . . . . . . vii

  13. Hybrid silicon evanescent approach to optical interconnects

    E-Print Network [OSTI]

    2009-01-01

    Big Island, HI, USA, 2006 Hybrid silicon evanescent approach10.1007/s00339-009-5118-1 Hybrid silicon evanescent approachthe recently developed hybrid silicon evanescent platform (

  14. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    Citroën Unveils 69mpg Diesel Hybrid Prototypes. 31 January.Citröen, have developed diesel-hybrid prototypes thatalso apply hybrid technologies to diesel vehicles, further

  15. Lin et al TRB 14-2181 Causal Analysis of Passenger Train Accident on Shared-Use Rail Corridors1

    E-Print Network [OSTI]

    Barkan, Christopher P.L.

    , technical and political factors have limited the development of new,2 dedicated, very-high-speed rail have limited the development of new, dedicated, very-10 high-speed rail systems in North AmericaLin et al TRB 14-2181 Causal Analysis of Passenger Train Accident on Shared-Use Rail Corridors1 2

  16. Hybrid baryons in QCD

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dudek, Jozef J.; Edwards, Robert G.

    2012-03-21

    In this study, we present the first comprehensive study of hybrid baryons using lattice QCD methods. Using a large basis of composite QCD interpolating fields we extract an extensive spectrum of baryon states and isolate those of hybrid character using their relatively large overlap onto operators which sample gluonic excitations. We consider the spectrum of Nucleon and Delta states at several quark masses finding a set of positive parity hybrid baryons with quantum numbers $N_{1/2^+},\\,N_{1/2^+},\\,N_{3/2^+},\\, N_{3/2^+},\\,N_{5/2^+},\\,$ and $\\Delta_{1/2^+},\\, \\Delta_{3/2^+}$ at an energy scale above the first band of `conventional' excited positive parity baryons. This pattern of states is compatible withmore »a color octet gluonic excitation having $J^{P}=1^{+}$ as previously reported in the hybrid meson sector and with a comparable energy scale for the excitation, suggesting a common bound-state construction for hybrid mesons and baryons.« less

  17. "Hybrid" Black Holes

    E-Print Network [OSTI]

    Valeri P. Frolov; Andrei V. Frolov

    2014-12-30

    We discuss a solution of the Einstein equations, obtained by gluing the external Kerr metric and the internal Weyl metric, describing an axisymmetric static vacuum distorted black hole. These metrics are glued at the null surfaces representing their horizons. For this purpose we use the formalism of massive thin null shells. The corresponding solution is called a "hybrid" black hole. The massive null shell has an angular momentum which is the origin of the rotation of the external Kerr spacetime. At the same time, the shell distorts the geometry inside the horizon. The inner geometry of the "hybrid" black hole coincides with the geometry of the interior of a non-rotating Weyl-distorted black hole. Properties of the "hybrid" black holes are briefly discussed.

  18. Porosity in hybrid materials

    SciTech Connect (OSTI)

    Schaefer, D.W.; Beaucage, G.; Loy, D. [Sandia National Labs., Albuquerque, NM (United States)

    1995-12-31

    Multicomponent, or hybrid composites are emerging as precursors to porous materials. Sacrifice of an ephemeral phase can be used to generate porosity, the nature of which depends on precursor structure. Retention of an organic constituent, on the other hand, can add desirable toughness to an otherwise brittle ceramic. We use small-angle x-ray and neutron scattering to examine porosity in both simple and hybrid materials. We find that microphase separation controls porosity in almost all systems studied. Pore distributions are controlled by the detailed bonding within and between phases as well as the flexibility of polymeric constituents. Thus hybridization opens new regions of pore distributions not available in simple systems. We look at several sacrificial concepts and show that it is possible to generate multimodal pore size distributions due to the complicated phase structure in the precursor.

  19. Corn Hybrids for Texas. 

    E-Print Network [OSTI]

    Rogers, J. S.; McAfee, T. E.

    1954-01-01

    Corn Hybrids for Terns ST LOCATIONS AREA I AREA II ARE4 Ill AREA IV 2Prdrie View 7.Tylw lZ.Lockhart 17.Waxahachie 22San Antonio 3.Cleveland 8.Mt. Pbctont I3Brsnha B.Garland 23Lamposas 4.Colbqe Sta. 9Sulphw Spp. 14Holland l9.0reenvilb 24...Stephenville ,J* 5.K'rbyvilb I0.Cbrkdb 15.Tanpk 2ODetiion 25.Wllothe TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS. DIRECTOR, COLLEGE STATION, TEXAS DIGEST The Texas corn acreage planted to hybrids increased from less than 1 percent of the total acrea...

  20. Hybrid Cryptography Alexander W. Dent

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Hybrid Cryptography Alexander W. Dent January 3, 2009 Version 1.1 This version is an update asymmet­ ric encryption schemes can benefit from a formalisation of the prin­ ciples of hybrid cryptography. The main focus of research in hybrid cryptography has been in producing e#cient asymmetric

  1. Hybrid Cryptography Alexander W. Dent

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Hybrid Cryptography Alexander W. Dent January 3, 2009 Version 1.1 This version is an update asymmet- ric encryption schemes can benefit from a formalisation of the prin- ciples of hybrid cryptography. The main focus of research in hybrid cryptography has been in producing efficient asymmetric

  2. Hybrid & Hydrogen Vehicle Research Laboratory

    E-Print Network [OSTI]

    Lee, Dongwon

    Hybrid & Hydrogen Vehicle Research Laboratory www.vss.psu.edu/hhvrl Joel R. Anstrom, Director 201 The Pennsylvania Transportation Institute Hybrid and Hydrogen Vehicle Research Laboratory will contribute to the advancement of hybrid and hydrogen vehicle technology to promote the emerging hydrogen economy by providing

  3. A technoregulatory analysis of government regulation and oversight in the United States for the protection of passenger safety in commercial human spaceflight

    E-Print Network [OSTI]

    Leybovich, Michael Elliot

    2009-01-01

    Commercial human spaceflight looks ready to take off as an industry, with "space tourism" as its first application. Paying passengers are likely to begin taking suborbital spaceflights within the next several years, both ...

  4. Hybrid Quantum Computation

    E-Print Network [OSTI]

    Arun Sehrawat; Daniel Zemann; Berthold-Georg Englert

    2010-09-25

    We present a hybrid model of the unitary-evolution-based quantum computation model and the measurement-based quantum computation model. In the hybrid model part of a quantum circuit is simulated by unitary evolution and the rest by measurements on star graph states, thereby combining the advantages of the two standard quantum computation models. In the hybrid model, a complicated unitary gate under simulation is decomposed in terms of a sequence of single-qubit operations, the controlled-Z gates, and multi-qubit rotations around the z-axis. Every single-qubit- and the controlled-Z gate are realized by a respective unitary evolution, and every multi-qubit rotation is executed by a single measurement on a required star graph state. The classical information processing in our model only needs an information flow vector and propagation matrices. We provide the implementation of multi-control gates in the hybrid model. They are very useful for implementing Grover's search algorithm, which is studied as an illustrating example.

  5. DOE Hybrid and Electric Vehicle Test Platform

    SciTech Connect (OSTI)

    Gao, Yimin [Advanced Vehicle Research Center, Danville, VA (United States)

    2012-03-31

    Based on the contract NT-42790 to the Department of Energy, “Plug-in Hybrid Ethanol Research Platform”, Advanced Vehicle Research Center (AVRC) Virginia has successfully developed the phase I electric drive train research platform which has been named as Laboratory Rapid Application Testbed (LabRAT). In phase II, LabRAT is to be upgraded into plug-in hybrid research platform, which will be capable of testing power systems for electric vehicles, and plug-in hybrid electric vehicles running on conventional as well as alternative fuels. LabRAT is configured as a rolling testbed with plentiful space for installing various component configurations. Component connections are modularized for flexibility and are easily replaced for testing various mechanisms. LabRAT is designed and built as a full functional vehicle chassis with a steering system, brake system and four wheel suspension. The rear drive axle offers maximum flexibility with a quickly changeable gear ratio final drive to accommodate different motor speed requirements. The electric drive system includes an electric motor which is mechanically connected to the rear axle through an integrated speed/torque sensor. Initially, a 100 kW UQM motor and corresponding UQM motor controller is used which can be easily replaced with another motor/controller combination. A lithium iron phosphate (LiFePO4) battery pack is installed, which consists of 108 cells of 100 AH capacity, giving the total energy capacity of 32.5 kWh. Correspondingly, a fully functional battery management system (BMS) is installed to perform battery cell operation monitoring, cell voltage balancing, and reporting battery real time operating parameters to vehicle controller. An advanced vehicle controller ECU is installed for controlling the drive train. The vehicle controller ECU receives traction or braking torque command from driver through accelerator and brake pedal position sensors and battery operating signals from the BMS through CAN BUS, and then generates motor torque command (traction or braking) to the motor controller based on the control algorithm software embedded in the vehicle controller ECU. The vehicle controller ECU is a re-programmable electronic control unit. Any control algorithm software developed can be easily downloaded to vehicle controller ECU to test any newly developed control strategy. The flexibility of the control system significantly enhances the practical applicability of the LabRAT. A new test methodology has been developed for the LabRAT simulating any vehicles running on road with different weights from compact passenger car to light duty truck on an AC or eddy current dynamometers without much effort for modification of the system. LabRAT is equipped with a fully functional data acquisition system supplied by CyberMetrix. The measurement points along the drive train are DC electric power between battery pack and motor controller input, AC electric power between motor controller and electric motor, mechanical power between motor and rear axle. The data acquisition system is designed with more capability than current requirements in order to meet the requirements for phase II.

  6. Lightweight materials in the light-duty passenger vehicle market: Their market penetration potential and impacts

    SciTech Connect (OSTI)

    Stodolsky, F. [Argonne National Lab., IL (United States). Center for Transportation Research]|[Argonne National Lab., Washington, DC (United States); Vyas, A.; Cuenca, R. [Argonne National Lab., IL (United States). Center for Transportation Research

    1995-06-01

    This paper summarizes the results of a lightweight materials study. Various lightweight materials are examined and the most cost effective are selected for further analysis. Aluminum and high-performance polymer matrix composites (PMCS) are found to have the highest potential for reducing the weight of automobiles and passenger-oriented light trucks. Weight reduction potential for aluminum and carbon fiber-based PMCs are computed based on a set of component-specific replacement criteria (such as stiffness and strength), and the consequent incremental cost scenarios are developed. The authors assume that a materials R and D program successfully reduces the cost of manufacturing aluminum and carbon fiber PMC-intensive vehicles. A vehicle choice model is used to project market shares for the lightweight vehicles. A vehicle survival and age-related usage model is employed to compute energy consumption over time for the vehicle stock. After a review of projected costs, the following two sets of vehicles are characterized to compete with the conventional materials vehicles: (1) aluminum vehicles with limited replacement providing 19% weight reduction (AIV-Mid), and (2) aluminum vehicles with the maximum replacement providing 31% weight reduction (AIV-Max). Assuming mass-market introduction in 2005, the authors project a national petroleum energy savings of 3% for AIV-Mid and 5% for AIV-Max in 2030.

  7. Corn Hybrids for Texas. 

    E-Print Network [OSTI]

    Rogers, J. S.; Bockholt, A. J.; Collier, J. W.

    1957-01-01

    practices which would bring their corn into tassel around June 1. This can be done by planting adapted hybrids at the dates recom- mended in Table 1. When planting is delayed, or if it is necessary to replant, hybrids with earlier maturity should... 90 ' 65.2 Coker 911 67.3 Texas 28 64.9 Texas 26 62.7 Texas 17W 73.0 Tennessee 29 67.5 Texas 9W 74.0 North Carolina 29 65.9 Georgia lOlW 70.7 Dixie 18 63.0 Asgrow lOlW 59.0 TRF 3 62.2 Coker 811 40.0 Surcropper 47.6 - - Averase yield 67...

  8. Pulsed hybrid field emitter

    DOE Patents [OSTI]

    Sampayan, S.E.

    1998-03-03

    A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays. 11 figs.

  9. Pulsed hybrid field emitter

    DOE Patents [OSTI]

    Sampayan, Stephen E. (Manteca, CA)

    1998-01-01

    A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays.

  10. Hybrid electroluminescent devices

    DOE Patents [OSTI]

    Shiang, Joseph John (Niskayuna, NY); Duggal, Anil Raj (Niskayuna, NY); Michael, Joseph Darryl (Schenectady, NY)

    2010-08-03

    A hybrid electroluminescent (EL) device comprises at least one inorganic diode element and at least one organic EL element that are electrically connected in series. The absolute value of the breakdown voltage of the inorganic diode element is greater than the absolute value of the maximum reverse bias voltage across the series. The inorganic diode element can be a power diode, a Schottky barrier diode, or a light-emitting diode.

  11. Remote hybrid power systems

    SciTech Connect (OSTI)

    Barley, C.D.; Winn, C.B. [Colorado State Univ., Fort Collins, CO (United States)

    1997-12-31

    This paper provides an overview of the emerging technology of remote, stand-alone electrical power systems featuring a renewable source (wind or photovoltaics [PV]) as well as a diesel generator, with or without an energy storage device. Other stand-alone power systems are discussed briefly, mainly to emphasize the domain of hybrid systems. The history of hybrid systems is reviewed, beginning with the first wind/diesel system in the late 1970s. Other topics include issues arising from the characteristics of diesel engine/generator sets; simple vs. complex systems; the various energy storage technologies that have been used or proposed; control strategies; modeling; optimization; and some {open_quotes}nuts & bolts{close_quotes} details. The bibliography includes over 130 references which are cited throughout the topical discussions. It is concluded that the technical feasibility of hybrid systems has been demonstrated through many prototype installations, and that areas for further improvements include higher reliability and more economical energy storage devices. 139 refs., 7 figs., 1 tab.

  12. Hybrid Computer Architectures Motivations for Research

    E-Print Network [OSTI]

    Kavi, Krishna

    Hybrid Computer Architectures Motivations for Research What Is a Hybrid Processor? Hybrid commercial hybrid chips provide fixed processing cores and Field Programmable Gate Array (FPGA) elements an Application Specific Integrated Service (ASIC) can provide. How Do We Use Them? Hybrid chips seem uniquely

  13. Hybrid solar lighting distribution systems and components

    DOE Patents [OSTI]

    Muhs, Jeffrey D. (Lenoir City, TN); Earl, Dennis D. (Knoxville, TN); Beshears, David L. (Knoxville, TN); Maxey, Lonnie C. (Powell, TN); Jordan, John K. (Oak Ridge, TN); Lind, Randall F. (Lenoir City, TN)

    2011-07-05

    A hybrid solar lighting distribution system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates all components.

  14. Hybrid solar lighting systems and components

    DOE Patents [OSTI]

    Muhs, Jeffrey D. (Lenoir City, TN); Earl, Dennis D. (Knoxville, TN); Beshears, David L. (Knoxville, TN); Maxey, Lonnie C. (Powell, TN); Jordan, John K. (Oak Ridge, TN); Lind, Randall F. (Lenoir City, TN)

    2007-06-12

    A hybrid solar lighting system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates each component.

  15. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    secrets, but the price of hybrid cars and trucks are betweenCosts of hybrid vehicles Depending on whether a car companydiesel-hybrid prototypes that attained 70 MPG (Green Car

  16. Issue 5: High Interest in Hybrid Cars

    E-Print Network [OSTI]

    Ong, Paul M.; Haselhoff, Kim

    2005-01-01

    2005). “High Interest in Hybrid Cars. ” SCS Fact Sheet, Vol.May 2005 High Interest in Hybrid Cars I NTRODUCTION PublicThe unique features of a hybrid car mean that it is more

  17. Hybrid Silicon Photonic Integrated Circuit Technology

    E-Print Network [OSTI]

    2013-01-01

    and J. E. Bowers, “Hybrid silicon evanescent devices,”and J. E. Bowers, “A hybrid AlGaInAs-silicon evanescentColdren, and J. E. Bowers, “Hybrid III/V sili- con photonic

  18. A hybrid tissue-engineered heart valve

    E-Print Network [OSTI]

    Alavi, SH; Kheradvar, A

    2015-01-01

    load-bearing component of the hybrid lea?et, and it shouldin the left ventricle. Hybrid tissue was also previouslyA Hybrid Tissue-Engineered Heart Valve S. Hamed Alavi, PhD,

  19. Hybrid Publicly Verifiable Computation James Alderman

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Hybrid Publicly Verifiable Computation James Alderman , Christian Janson, Carlos Cid , and Jason introduce Hybrid PVC (HPVC) which, with a single setup stage, provides a flexible solution to outsourced for such systems. Keywords-- Hybrid Publicly Verifiable Computation, Verifiable Delegable Computation, Dual

  20. Hybrid Silicon Photonics for Optical Interconnects

    E-Print Network [OSTI]

    2011-01-01

    Promising Technology for the hybrid silicon laser in 2007.Electrically pumped hybrid AlGaInAs-silicon evanescentA. Yariv, “Electrically pumped hybrid evanescent Si/InGaAsP

  1. Hybrid classical-quantum formulations ask for hybrid notions

    E-Print Network [OSTI]

    Carlos Barceló; Raúl Carballo-Rubio; Luis J. Garay; Ricardo Gómez-Escalante

    2013-01-28

    We reappraise some of the hybrid classical-quantum models proposed in the literature with the goal of retrieving some of their common characteristics. In particular, first, we analyze in detail the Peres-Terno argument regarding the inconsistency of hybrid quantizations of the Sudarshan type. We show that to accept such hybrid formalism entails the necessity of dealing with additional degrees of freedom beyond those in the straight complete quantization of the system. Second, we recover a similar enlargement of degrees of freedom in the so-called statistical hybrid models. Finally, we use Wigner's quantization of a simple model to illustrate how in hybrid systems the subsystems are never purely classical or quantum. A certain degree of quantumness (classicality) is being exchanged between the different sectors of the theory, which in this particular unphysical toy model makes them undistinguishable.

  2. Hybrid conformal field theories

    E-Print Network [OSTI]

    Marco Bertolini; Ilarion V. Melnikov; M. Ronen Plesser

    2013-07-26

    We describe a class of (2,2) superconformal field theories obtained by fibering a Landau-Ginzburg orbifold CFT over a compact Kaehler base manifold. While such models are naturally obtained as phases in a gauged linear sigma model, our construction is independent of such an embedding. We discuss the general properties of such theories and present a technique to study the massless spectrum of the associated heterotic compactification. We test the validity of our method by applying it to hybrid phases of linear models and comparing spectra among the phases.

  3. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    Source: Velocity Suite, Global Energy Data Advanced Coal Wind Hybrid: Economic Analysis 6.3.2 Comparison with Non-hybrid Competing

  4. Advanced Hybrid Water Heater using Electrochemical Compressor...

    Energy Savers [EERE]

    Advanced Hybrid Water Heater using Electrochemical Compressor Advanced Hybrid Water Heater using Electrochemical Compressor Xergy is using its Electro Chemical Compression (ECC)...

  5. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic29 Figure 9. Sensitivity to Coal

  6. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hybrid Rotaxanes: Interlocked Structures for Quantum Computing? Hybrid Rotaxanes: Interlocked Structures for Quantum Computing? Print Wednesday, 26 August 2009 00:00 Rotaxanes are...

  7. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic21 Figure 6. Comparison of ACWH and CCGT-Wind

  8. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    century. Hybrid electric vehicles (HEVs) reduce emissionsas plug-in HEVs and full electric vehicles to market. In theon their design, hybrid electric vehicles employ electric

  9. Hybrid spread spectrum radio system

    DOE Patents [OSTI]

    Smith, Stephen F. (London, TN) [London, TN; Dress, William B. (Camas, WA) [Camas, WA

    2010-02-09

    Systems and methods are described for hybrid spread spectrum radio systems. A method, includes receiving a hybrid spread spectrum signal including: fast frequency hopping demodulating and direct sequence demodulating a direct sequence spread spectrum signal, wherein multiple frequency hops occur within a single data-bit time and each bit is represented by chip transmissions at multiple frequencies.

  10. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R00 Date: 15 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) August 2005 or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R00 DESIGN

  11. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R01 Date: 1 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) Mark Hagen or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R01 DESIGN

  12. Massive Hybrid Stars with Strangeness

    E-Print Network [OSTI]

    Tatsuyuki Takatsuka; Tetsuo Hatsuda; Kota Masuda

    2014-02-19

    How massive the hybrid stars could be is discussed by a "3-window model" proposed from a new strategy to construct the equation of state with hadron-quark transition. It is found that hybrid stars have a strong potentiality to generate a large mass compatible with two-solar-mass neutron star observations.

  13. Essays On Hybrid Bundle Pricing 

    E-Print Network [OSTI]

    Meyer, Jeffrey Dean

    2011-10-21

    model of optimal pricing for hybrid bundles by a monopolist. My results show that an increase in quality variability of the service is generally associated with a higher optimal hybrid bundle price and a lower optimal price of the good, but lower overall...

  14. Hybrid powertrain controller

    DOE Patents [OSTI]

    Jankovic, Miroslava (Birmingham, MI); Powell, Barry Kay (Belleville, MI)

    2000-12-26

    A hybrid powertrain for a vehicle comprising a diesel engine and an electric motor in a parallel arrangement with a multiple ratio transmission located on the torque output side of the diesel engine, final drive gearing connecting drivably the output shaft of transmission to traction wheels of the vehicle, and an electric motor drivably coupled to the final drive gearing. A powertrain controller schedules fuel delivered to the diesel engine and effects a split of the total power available, a portion of the power being delivered by the diesel and the balance of the power being delivered by the motor. A shifting schedule for the multiple ratio transmission makes it possible for establishing a proportional relationship between accelerator pedal movement and torque desired at the wheels. The control strategy for the powertrain maintains drivability of the vehicle that resembles drivability of a conventional spark ignition vehicle engine powertrain while achieving improved fuel efficiency and low exhaust gas emissions.

  15. Hybrid powertrain system

    DOE Patents [OSTI]

    Grillo, Ricardo C.; O'Neil, Walter K.; Preston, David M.

    2005-09-20

    A hybrid powertrain system is provided that includes a first prime mover having a rotational output, a second prime mover having a rotational output, and a transmission having a main shaft supporting at least two main shaft gears thereon. The transmission includes a first independent countershaft drivingly connected to the first prime mover and including at least one ratio gear supported thereon that meshes with a respective main shaft gear. A second independent countershaft is drivingly connected to the second prime mover and includes at least one ratio gear supported thereon that meshes with a respective main shaft gear. The ratio gears on the first and second countershafts cooperate with the main shaft gears to provide at least one gear ratio between the first and second countershafts and the main shaft. A shift control mechanism selectively engages and disengages the first and second countershafts for rotation with the main shaft.

  16. Hybrid vehicle control

    DOE Patents [OSTI]

    Shallvari, Iva; Velnati, Sashidhar; DeGroot, Kenneth P.

    2015-07-28

    A method and apparatus for heating a catalytic converter's catalyst to an efficient operating temperature in a hybrid electric vehicle when the vehicle is in a charge limited mode such as e.g., the charge depleting mode or when the vehicle's high voltage battery is otherwise charge limited. The method and apparatus determine whether a high voltage battery of the vehicle is incapable of accepting a first amount of charge associated with a first procedure to warm-up the catalyst. If it is determined that the high voltage battery is incapable of accepting the first amount of charge, a second procedure with an acceptable amount of charge is performed to warm-up the catalyst.

  17. Hybrid dark energy

    E-Print Network [OSTI]

    J. S. Alcaniz; R. Silva; F. C. Carvalho; Zong-Hong Zhu

    2008-07-16

    Extending previous results [Phys. Rev. Lett. 97, 081301 (2006)], we explore the cosmological implications of a new quintessence scenario driven by a slow rolling homogeneous scalar field whose equation of state behaved as freezing over the entire cosmic evolution, is approaching -1 today, but will become thawing in the near future, thereby driving the Universe to an eternal deceleration. We argue that such a mixed behavior, named \\emph{hybrid}, may reconcile the slight preference of current observational data for freezing potentials with the impossibility of defining observables in the String/M-theory context due to the existence of a cosmological event horizon in asymptotically de Sitter universes as, e.g., pure freezing scenarios.

  18. Electric and Hybrid Vehicles Program 18th annual report to Congress for Fiscal Year 1994

    SciTech Connect (OSTI)

    NONE

    1995-04-01

    The Department remains focused on the technologies that are critical to making electric and hybrid vehicles commercially viable and competitive with current production gasoline-fueled vehicles in performance, reliability, and affordability. During Fiscal Year 1994, significant progress was made toward fulfilling the intent of Congress. The Department and the United States Advanced Battery Consortium (a partnership of the three major domestic automobile manufacturers) continued to work together and to focus the efforts of battery developers on the battery technologies that are most likely to be commercialized in the near term. Progress was made in industry cost-shared contracts toward demonstrating the technical feasibility of fuel cells for passenger bus and light duty vehicle applications. Two industry teams which will develop hybrid vehicle propulsion technologies have been selected through competitive procurement and have initiated work, in Fiscal Year 1994. In addition, technical studies and program planning continue, as required by the Energy Policy Act of 1992, to achieve the goals of reducing the transportation sector dependence on imported oil, reducing the level of environmentally harmful emissions, and enhancing industrial productivity and competitiveness.

  19. Nonminimally coupled hybrid inflation

    SciTech Connect (OSTI)

    Koh, Seoktae [Center for Quantum Spacetime, Sogang University, Shinsu-dong 1, Mapo-gu, 121-742, Seoul (Korea, Republic of); Minamitsuji, Masato [Department of Physics, Graduate School of Science and Technology, Kwansei Gakuin University, Sanda 669-1337 (Japan)

    2011-02-15

    We discuss the hybrid inflation model where the inflaton field is nonminimally coupled to gravity. In the Jordan frame, the potential contains {phi}{sup 4} term as well as terms in the original hybrid inflation model. In our model, inflation can be classified into the type (I) and the type (II). In the type (I), inflation is terminated by the tachyonic instability of the waterfall field, while in the type (II) by the violation of slow-roll conditions. In our model, the reheating takes place only at the true minimum and even in the case (II) finally the tachyonic instability occurs after the termination of inflation. For a negative nonminimal coupling, inflation takes place in the vacuum-dominated region, in the large field region, or near the local minimum/maximum. Inflation in the vacuum-dominated region becomes either the type (I) or (II), resulting in a blue or red spectrum of the curvature perturbations, respectively. Inflation around the local maximum can be either the type (I) or the type (II), which results in the red spectrum of the curvature perturbations, while around the local minimum it must be the type (I), which results in the blue spectrum. In the large field region, to terminate inflation, potential in the Einstein frame must be positively tilted, always resulting in the red spectrum. We then numerically solve the equations of motion to investigate the whole dynamics of inflaton and confirm that the spectrum of curvature perturbations changes from red to blue ones as scales become smaller.

  20. Hybrid Systems: From Verification to Falsification

    E-Print Network [OSTI]

    Kavraki, Lydia E.

    Hybrid Systems: From Verification to Falsification Erion Plaku, Lydia E. Kavraki, and Moshe Y}@cs.rice.edu Abstract. We propose HyDICE, Hybrid DIscrete Continuous Exploration, a multi-layered approach for hybrid. The discrete search uses the discrete transitions of the hybrid system and coarse-grained decompositions

  1. Hybrid Abstractions that Preserve Timed Languages

    E-Print Network [OSTI]

    Pappas, George J.

    Hybrid Abstractions that Preserve Timed Languages Paulo Tabuada1 and George J. Pappas2 1 Instituto@ee.upenn.edu Abstract. In this paper we consider the problem of extracting an ab- straction from a hybrid control system that determine when trajectories of the original hybrid system can be generated by the abstracted hybrid system

  2. Hybrid Geometric Reduction of Hybrid Systems Aaron D. Ames and Shankar Sastry

    E-Print Network [OSTI]

    Sastry, S. Shankar

    Hybrid Geometric Reduction of Hybrid Systems Aaron D. Ames and Shankar Sastry Abstract-- This paper presents a unifying framework in which to carry out the hybrid geometric reduction of hybrid systems, generalizing classical reduction to a hybrid setting. I. INTRODUCTION The reduction of mechanical systems

  3. Hybrid Charmonium and the $?-?$ Puzzle

    E-Print Network [OSTI]

    Leonard S. Kisslinger; Diana Parno; Seamus Riordan

    2008-11-21

    Using the method of QCD Sum Rules, we estimate the energy of the lowest hybrid Charmonium state, and find it to be at the energy of the $\\Psi'(2S)$ state, about 600 Mev above the $J/\\Psi(1S)$ state. Since our solution is not consistent with a pure hybrid at this energy, we conclude that the $\\Psi'(2S)$ state is probably an admixed $c \\bar{c}$ and hybrid $c \\bar{c}g$ state. From this conjecture we find a possible explanation of the famous $\\rho-\\pi$ puzzle.

  4. Hybrid tomography for conductivity imaging

    E-Print Network [OSTI]

    T. Widlak; O. Scherzer

    2012-03-20

    Hybrid imaging techniques utilize couplings of physical modalities -- they are called hybrid, because, typically, the excitation and measurement quantities belong to different modalities. Recently there has been an enormous research interest in this area because these methods promise very high resolution. In this paper we give a review on hybrid tomography methods for \\emph{electrical conductivity} imaging. The reviewed imaging methods utilize couplings between electric, magnetic and ultrasound modalities. By this it is possible to perform high-resolution electrical impedance imaging and to overcome the low-resolution problem of electric impedance tomography.

  5. Hybrid Vehicle Program. Final report

    SciTech Connect (OSTI)

    None

    1984-06-01

    This report summarizes the activities on the Hybrid Vehicle Program. The program objectives and the vehicle specifications are reviewed. The Hybrid Vehicle has been designed so that maximum use can be made of existing production components with a minimum compromise to program goals. The program status as of the February 9-10 Hardware Test Review is presented, and discussions of the vehicle subsystem, the hybrid propulsion subsystem, the battery subsystem, and the test mule programs are included. Other program aspects included are quality assurance and support equipment. 16 references, 132 figures, 47 tables.

  6. Hybridization and the Typological Paradigm 

    E-Print Network [OSTI]

    Carlson, Charles

    2012-02-14

    chemical cues, whether conspecifics in their immediate vicinity have high parasite loads and also whether this has an effect on mating and association behavior toward both conspecific and hybrid mates. Our hypothesis being that females will have greater...

  7. Compositional Variation Within Hybrid Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the metal-alloy tip component of a hybrid nanostructure with that of free-standing metal-alloy nanoparticles. Transmission electron microscopy (TEM) image of PtCo-CdS...

  8. Hybrid Zero-capacity Channels

    E-Print Network [OSTI]

    Sergii Strelchuk; Jonathan Oppenheim

    2012-07-04

    There are only two known kinds of zero-capacity channels. The first kind produces entangled states that have positive partial transpose, and the second one - states that are cloneable. We consider the family of 'hybrid' quantum channels, which lies in the intersection of the above classes of channels and investigate its properties. It gives rise to the first explicit examples of the channels, which create bound entangled states that have the property of being cloneable to the arbitrary finite number of parties. Hybrid channels provide the first example of highly cloneable binding entanglement channels, for which known superactivation protocols must fail - superactivation is the effect where two channels each with zero quantum capacity having positive capacity when used together. We give two methods to construct a hybrid channel from any binding entanglement channel. We also find the low-dimensional counterparts of hybrid states - bipartite qubit states which are extendible and possess two-way key.

  9. Hybrid Fuel Cell Technology Overview

    SciTech Connect (OSTI)

    None available

    2001-05-31

    For the purpose of this STI product and unless otherwise stated, hybrid fuel cell systems are power generation systems in which a high temperature fuel cell is combined with another power generating technology. The resulting system exhibits a synergism in which the combination performs with an efficiency far greater than can be provided by either system alone. Hybrid fuel cell designs under development include fuel cell with gas turbine, fuel cell with reciprocating (piston) engine, and designs that combine different fuel cell technologies. Hybrid systems have been extensively analyzed and studied over the past five years by the Department of Energy (DOE), industry, and others. These efforts have revealed that this combination is capable of providing remarkably high efficiencies. This attribute, combined with an inherent low level of pollutant emission, suggests that hybrid systems are likely to serve as the next generation of advanced power generation systems.

  10. Global optimization of hybrid systems

    E-Print Network [OSTI]

    Lee, Cha Kun

    2006-01-01

    Systems that exhibit both discrete state and continuous state dynamics are called hybrid systems. In most nontrivial cases, these two aspects of system behavior interact to such a significant extent that they cannot be ...

  11. Hybrid particles and associated methods

    SciTech Connect (OSTI)

    Fox, Robert V; Rodriguez, Rene; Pak, Joshua J; Sun, Chivin

    2015-02-10

    Hybrid particles that comprise a coating surrounding a chalcopyrite material, the coating comprising a metal, a semiconductive material, or a polymer; a core comprising a chalcopyrite material and a shell comprising a functionalized chalcopyrite material, the shell enveloping the core; or a reaction product of a chalcopyrite material and at least one of a reagent, heat, and radiation. Methods of forming the hybrid particles are also disclosed.

  12. Directed mammalian gene regulatory networks using expression and comparative genomic hybridization microarray data from radiation hybrids

    E-Print Network [OSTI]

    2009-01-01

    generation whole genome-radiation hybrid map spanning theA high- resolution radiation hybrid map of the human genomeRecently we have used radiation hybrids to map loci based on

  13. Since 1975, the fuel economy of passenger cars and light trucks has been regulated by the corporate average fuel economy (CAFE) standards,

    E-Print Network [OSTI]

    Since 1975, the fuel economy of passenger cars and light trucks has been regulated by the corporate average fuel economy (CAFE) standards, established during the energy crises of the 1970s. Calls to increase fuel economy are usually met by a fierce debate on the effectiveness of the CAFE standards

  14. Testimony to the United States Senate Committee on Energy and Natural Resources POLICIES TO INCREASE PASSENGER CAR AND LIGHT TRUCK FUEL

    E-Print Network [OSTI]

    TO INCREASE PASSENGER CAR AND LIGHT TRUCK FUEL ECONOMY 2:30 pm, Tuesday, January 30, 2007 Dirksen Senate to formulate effective policies to significantly increase motor vehicle fuel economy. The views I express today to supply the world's growing demand for liquid fuels. Why do we need fuel economy policy? For too long we

  15. Effects of Vehicle Image in Gasoline-Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Heffner, Reid R.; Kurani, Ken; Turrentine, Tom

    2005-01-01

    of Vehicle Image in Gasoline-Hybrid Electric Vehicles Reidof Vehicle Image in Gasoline-Hybrid Electric Vehicles Reidhigh demand for gasoline-hybrid electric vehicles (HEVs)?

  16. Hybrid Traffic Data Collection Roadmap: Objectives and Methods

    E-Print Network [OSTI]

    Bayen, Alexandre

    2013-01-01

    information environment. Hybrid Traffic Data CollectionBibliography Bibliography Hybrid Traffic Data Collection19, no. 1, p. 15–25, 2003. Hybrid Traffic Data Collection

  17. System Simulations of Hybrid Electric Vehicles with Focus on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System Simulations of Hybrid Electric Vehicles with Focus on Emissions System Simulations of Hybrid Electric Vehicles with Focus on Emissions Comparative simulations of hybrid...

  18. Are batteries ready for plug-in hybrid buyers?

    E-Print Network [OSTI]

    Axsen, Jonn; Kurani, Kenneth S.; Burke, Andrew

    2008-01-01

    and Impacts of Hybrid Electric Vehicle Options for Compactof Plug-In Hybrid Electric Vehicles, Volume 1: Nationwideand Impacts of Hybrid Electric Vehicle Options, EPRI, Palo

  19. Are Batteries Ready for Plug-in Hybrid Buyers?

    E-Print Network [OSTI]

    Axsen, Jonn; Kurani, Kenneth S; Burke, Andy

    2009-01-01

    and Impacts of Hybrid Electric Vehicle Options for Compactof Plug-In Hybrid Electric Vehicles, Volume 1: Nationwideand Impacts of Hybrid Electric Vehicle Options, EPRI, Palo

  20. Are Batteries Ready for Plug-in Hybrid Buyers?

    E-Print Network [OSTI]

    Axsen, Jonn; Burke, Andy; Kurani, Kenneth S

    2010-01-01

    and impacts of hybrid electric vehicle options for compactof plug-in hybrid electric vehicles, vol. 1: nationwideimpacts of hybrid electric vehicle options. Report #1000349,

  1. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    in batteries, ultracapacitors, fuel cells and hybrid vehicleBattery, Hybrid and Fuel Cell Electric Vehicle SymposiumBattery, Hybrid and Fuel Cell Electric Vehicle Symposium

  2. Hybrid power source

    DOE Patents [OSTI]

    Singh, Harmohan N.

    2012-06-05

    A hybrid power system is comprised of a high energy density element such as a fuel-cell and high power density elements such as a supercapacitor banks. A DC/DC converter electrically connected to the fuel cell and converting the energy level of the energy supplied by the fuel cell. A first switch is electrically connected to the DC/DC converter. First and second supercapacitors are electrically connected to the first switch and a second switch. A controller is connected to the first switch and the second switch, monitoring charge levels of the supercapacitors and controls the switching in response to the charge levels. A load is electrically connected to the second switch. The first switch connects the DC/DC converter to the first supercapacitor when the second switch connects the second supercapacitor to the load. The first switch connects the DC/DC converter to the second supercapacitor when the second switch connects the first supercapacitor to the load.

  3. Simulated comparisons of emissions and fuel efficiency of diesel and gasoline hybrid electric vehicles

    SciTech Connect (OSTI)

    Gao, Zhiming [ORNL; Chakravarthy, Veerathu K [ORNL; Daw, C Stuart [ORNL

    2011-01-01

    This paper presents details and results of hybrid and plug-in hybrid electric passenger vehicle (HEV and PHEV) simulations that account for the interaction of thermal transients from drive cycle demands and engine start/stop events with aftertreatment devices and their associated fuel penalties. The simulations were conducted using the Powertrain Systems Analysis Toolkit (PSAT) software developed by Argonne National Laboratory (ANL) combined with aftertreatment component models developed at Oak Ridge National Lab (ORNL). A three-way catalyst model is used in simulations of gasoline powered vehicles while a lean NOx trap model in used to simulated NOx reduction in diesel powered vehicles. Both cases also use a previously reported methodology for simulating the temperature and species transients associated with the intermittent engine operation and typical drive cycle transients which are a significant departure from the usual experimental steady-state engine-map based approach adopted often in vehicle system simulations. Comparative simulations indicate a higher efficiency for diesel powered vehicles but the advantage is lowered by about a third (for both HEVs and PHEVs) when the fuel penalty associated with operating a lean NOx trap is included and may be reduced even more when fuel penalty associated with a particulate filter is included in diesel vehicle simulations. Through these preliminary studies, it is clearly demonstrated how accurate engine and exhaust systems models that can account for highly intermittent and transient engine operation in hybrid vehicles can be used to account for impact of emissions in comparative vehicle systems studies. Future plans with models for other devices such as particulate filters, diesel oxidation and selective reduction catalysts are also discussed.

  4. Rotordynamic evaluation of hybrid damper seals with metal mesh elements 

    E-Print Network [OSTI]

    Bhamidipati, Laxmi Narasimha Kameswara Sarma

    2003-01-01

    Metal mesh hybrid damper seals (MHS) were proposed to be an alternative for brush hybrid pocket damper seals (PDS) in turbomachinery. The metal mesh hybrid damper seal is a hybrid of the pocket damper seal and the metal ...

  5. CRADA Final Report: Process development for hybrid solar cells

    E-Print Network [OSTI]

    Ager, Joel W

    2011-01-01

    the high efficiency, high voltage hybrid tandem solar celltarget efficiency of 30%, the hybrid tandem solar cells have

  6. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    in series hybrids using gasoline and diesel engines anddiesel powered buses and consistently better fuel economy than hybrid

  7. Hybrid Ventilation Optimization and Control Research and Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Ventilation Optimization and Control Research and Development Hybrid Ventilation Optimization and Control Research and Development Credit: Massachusetts Institute of...

  8. Conditions when hybridization might predispose populations

    E-Print Network [OSTI]

    COMMENTARY Conditions when hybridization might predispose populations for adaptive radiation O (Sch- warzer et al., 2012), perhaps just as a consequence of many young species in geographical et al., 2011; Genner & Turner, 2012). Whether these species radiations happen despite hybridization

  9. Hybrid solar-fossil fuel power generation

    E-Print Network [OSTI]

    Sheu, Elysia J. (Elysia Ja-Zeng)

    2012-01-01

    In this thesis, a literature review of hybrid solar-fossil fuel power generation is first given with an emphasis on system integration and evaluation. Hybrid systems are defined as those which use solar energy and fuel ...

  10. CONDUCTIVE POLYCARBONATE NANOCOMPOSITES with HYBRID NANOFILLERS

    E-Print Network [OSTI]

    Collins, Gary S.

    CONDUCTIVE POLYCARBONATE NANOCOMPOSITES with HYBRID NANOFILLERS Catherine Smith, Brooks Lively, Wei of polymers. Emerging technologies have demonstrated the crucial need for highly conductive polymer combination between polycarbonate (PC) and hybrid concentrations of CNT and GNP nanofillers was investigated

  11. Hybrid Cotangent Bundle Reduction of Simple Hybrid Mechanical Systems with Symmetry

    E-Print Network [OSTI]

    Ames, Aaron

    Hybrid Cotangent Bundle Reduction of Simple Hybrid Mechanical Systems with Symmetry Aaron D. Ames the notion of a simple hybrid mechanical system, which generalizes mechanical systems to include unilateral constraints on the configuration space. From such a system we obtain, explicitly, a simple hybrid system

  12. Are hybrid species more fit than ancestral parent species in the current hybrid species habitats?

    E-Print Network [OSTI]

    Rieseberg, Loren

    Are hybrid species more fit than ancestral parent species in the current hybrid species habitats? L Columbia, Vancouver, BC, Canada Introduction Hybridization is receiving renewed attention as an important). For homoploid hybridization in plants, where chromosome number remains the same, models and empirical evi- dence

  13. Hybrid Zones and Sexual Selection 503 HYBRID ZONES AND SEXUAL SELECTION: INSIGHTS FROM

    E-Print Network [OSTI]

    Hybrid Zones and Sexual Selection 503 HYBRID ZONES AND SEXUAL SELECTION: INSIGHTS FROM THE AWASH BABOON HYBRID ZONE (Papio hamadryas anubis x P. h. hamadryas) Thore J. Bergman and Jacinta C. Beehner, have focused on the impact of sexual selection on populations of naturally occurring hybrid animals

  14. Hybrid Routhian Reduction of Lagrangian Hybrid Systems Aaron D. Ames and Shankar Sastry

    E-Print Network [OSTI]

    Ames, Aaron

    Hybrid Routhian Reduction of Lagrangian Hybrid Systems Aaron D. Ames and Shankar Sastry Department,sastry}@eecs.berkeley.edu Abstract-- This paper extends Routhian reduction to a hybrid setting, i.e., to systems that display both with unilateral constraints on the set of admissible configurations. This naturally yields the notion of a hybrid

  15. Modeling and Analysis ofModeling and Analysis of Hybrid Control SystemsHybrid Control Systems

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Modeling and Analysis ofModeling and Analysis of Hybrid Control SystemsHybrid Control Systems Karl.kth.se/~kallej MOVEP 2006, Bordeaux, France Karl H. Johansson, Hybrid control systems, MOVEP, Bordeaux on commands and autonomous actions #12;Karl H. Johansson, Hybrid control systems, MOVEP, Bordeaux, 2006

  16. Helping HAN for hybrid rockets

    SciTech Connect (OSTI)

    Ramohalli, K.; Dowler, W.

    1995-01-01

    Hydroxyl amine nitrate (HAN) is a powerful oxidizer for hybrid rocket flight motors. Miscible with water up to 95% by mass, it also has high density and has been extensively characterized for materials compatibility, safety, transportation, storage and handling. Before any serious attempt to use the proposed oxidizer in hybrids, though, the usual performance figures must first be obtained. The simplest are time-independent, equilibrium rocket performance numbers that include chamber temperature, temperature at the nozzle throat, and key species in the exhaust. These numbers must be followed by several other important performance evaluation, including burning rates, pressure dependence, susceptibility to instabilities and temperature sensitivity.

  17. Distributed Theorem Proving for Distributed Hybrid Systems

    E-Print Network [OSTI]

    Platzer, André

    system with a varying number of arbitrarily many cars. 1 Introduction Hybrid systems with joint discrete a multi-agent system, e.g., distributed car control systems. Such systems form distributed hybrid systemsDistributed Theorem Proving for Distributed Hybrid Systems David W. Renshaw, Sarah M. Loos

  18. Hybrid Signcryption Schemes With Outsider Security

    E-Print Network [OSTI]

    Dent, Alexander W.

    Hybrid Signcryption Schemes With Outsider Security (Extended Abstract) Alexander W. Dent.dent@rhul.ac.uk Abstract. This paper expands the notion of a KEM­DEM hybrid en- cryption scheme to the signcryption setting by introducing the notion of a signcryption KEM, a signcryption DEM and a hybrid signcryption scheme. We present

  19. Hybrid Ockhamist Temporal Logic Patrick Blackburn

    E-Print Network [OSTI]

    Goranko, Valentin

    Hybrid Ockhamist Temporal Logic Patrick Blackburn INRIA, Lorraine Campus Scientifique, BP 239 Nancy Johannesburg, South Africa vfg@na.rau.ac.za Abstract We introduce hybrid Ockhamist temporal logic, which combines the mechanisms of hybrid logic with Ockhamist semantics by employing nominals, satisfaction

  20. Hybrid Diverter Sheath Model Jeff Hammel

    E-Print Network [OSTI]

    Wurtele, Jonathan

    Hybrid Diverter Sheath Model Jeff Hammel Plasma Theory and Simulation Group APS ­ Division using a particle-fluid hybrid model. Electrons are modeled as an inertia-less (Boltzmann) fluid gyrokinetic code. The modeling methodology for the iterative nonlinear solver is presented. The hybrid model

  1. Hybrid Model Structures Aaron David Ames

    E-Print Network [OSTI]

    Ames, Aaron

    Hybrid Model Structures by Aaron David Ames B.A. (University of St. Thomas) 2001 B.S. (University of California, Berkeley Fall 2006 #12;Hybrid Model Structures Copyright 2006 by Aaron David Ames #12;Abstract Hybrid Model Structures by Aaron David Ames Masters of Arts in Mathematics University of California

  2. Hybrid organicinorganic materials for photonic applications

    E-Print Network [OSTI]

    Gilchrist, James F.

    Hybrid organic­inorganic materials for photonic applications Partha P. Banerjee,1,* Dean R. Evans,2 18015, USA *pbanerjee1@udayton.edu Abstract: This novel joint feature issue on "Hybrid organic that this feature issue encourages and stimulates further research to into hybrid materials with enhanced linear

  3. Hybrid organicinorganic materials for novel photonic applications

    E-Print Network [OSTI]

    Gilchrist, James F.

    Hybrid organic­inorganic materials for novel photonic applications Partha P. Banerjee,1, * Dean R. ID 192915); published 31 July 2013 This novel joint feature issue on "Hybrid organic that this feature issue encourages and stim- ulates further research into hybrid materials with enhanced linear

  4. 44421Federal Register / Vol. 62, No. 162 / Thursday, August 21, 1997 / Rules and Regulations THEFT RATES OF MODEL YEAR 1995 PASSENGER MOTOR VEHICLES STOLEN IN CALENDAR YEAR 1995--Continued

    E-Print Network [OSTI]

    RATES OF MODEL YEAR 1995 PASSENGER MOTOR VEHICLES STOLEN IN CALENDAR YEAR 1995--Continued Manufacturer Make/model (line) Thefts 1995 Production (mfgr's) 1995 1995 (per 1,000 vehi- cles pro- duced) theft

  5. ADVANCED HYBRID PARTICULATE COLLECTOR

    SciTech Connect (OSTI)

    Ye Zhuang; Stanley J. Miller; Michelle R. Olderbak; Rich Gebert

    2001-12-01

    A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the U.S. Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in an entirely novel manner. The AHPC concept combines fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two methods, both in the particulate collection step and in transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and solves the problem of reentrainment and re-collection of dust in conventional baghouses. Phase I of the development effort consisted of design, construction, and testing of a 5.7-m{sup 3}/min (200-acfm) working AHPC model. Results from both 8-hr parametric tests and 100-hr proof-of-concept tests with two different coals demonstrated excellent operability and greater than 99.99% fine-particle collection efficiency. Since all of the developmental goals of Phase I were met, the approach was scaled up in Phase II to a size of 255 m{sup 3}/min (9000 acfm) (equivalent in size to 2.5 MW) and was installed on a slipstream at the Big Stone Power Plant. For Phase II, the AHPC at Big Stone Power Plant was operated continuously from late July 1999 until mid-December 1999. The Phase II results were highly successful in that ultrahigh particle collection efficiency was achieved, pressure drop was well controlled, and system operability was excellent. For Phase III, the AHPC was modified into a more compact configuration, and components were installed that were closer to what would be used in a full-scale commercial design. The modified AHPC was operated from April to July 2000. While operational results were acceptable during this time, inspection of bags in the summer of 2000 revealed some membrane damage to the fabric that appeared to be caused by electrical effects. Subsequently, extensive theoretical, bench-scale, and pilot-scale investigations were completed to find an approach to prevent bag damage without compromising AHPC performance. Results showed that the best bag protection and AHPC performance were achieved by using a perforated plate installed between the discharge electrodes and bags. This perforated-plate design was then installed in the 2.5-MW AHPC at Big Stone Power Plant in Big Stone City, South Dakota, and the AHPC was operated from March to June 2001. Results showed that the perforated-plate design solved the bag damage problem and offered even better AHPC performance than the previous design. All of the AHPC performance goals were met, including ultrahigh collection efficiency, high air-to-cloth ratio, reasonable pressure drop, and long bag-cleaning interval.

  6. Models for asymmetric hybrid brane

    E-Print Network [OSTI]

    D. Bazeia; M. A. Marques; R. Menezes

    2015-10-15

    We deal with relativistic models described by a single real scalar field, searching for topological structures that behave asymmetrically, connecting minima with distinct profile. We use such features to build a new braneworld scenario, in which the source scalar field contributes to generate asymmetric hybrid brane.

  7. Hybrid mesons and auxiliary fields

    E-Print Network [OSTI]

    Fabien Buisseret; Vincent Mathieu

    2006-09-29

    Hybrid mesons are exotic mesons in which the color field is not in the ground state. Their understanding deserves interest from a theoretical point of view, because it is intimately related to nonperturbative aspects of QCD. Moreover, it seems that some recently detected particles, such as the $\\pi_1(1600)$ and the Y(4260), are serious hybrid candidates. In this work, we investigate the description of such exotic hadrons by applying the auxiliary fields technique to the widely used spinless Salpeter Hamiltonian with appropriate linear confinement. Instead of the usual numerical resolution, this technique allows to find simplified analytical mass spectra and wave functions of the Hamiltonian, which still lead to reliable qualitative predictions. We analyse and compare two different descriptions of hybrid mesons, namely a two-body $q\\bar q$ system with an excited flux tube, or a three-body $q\\bar q g$ system. We also compute the masses of the $1^{-+}$ hybrids. Our results are shown to be in satisfactory agreement with lattice QCD and other effective models.

  8. Hybrid chirped pulse amplification system

    DOE Patents [OSTI]

    Barty, Christopher P.; Jovanovic, Igor

    2005-03-29

    A hybrid chirped pulse amplification system wherein a short-pulse oscillator generates an oscillator pulse. The oscillator pulse is stretched to produce a stretched oscillator seed pulse. A pump laser generates a pump laser pulse. The stretched oscillator seed pulse and the pump laser pulse are directed into an optical parametric amplifier producing an optical parametric amplifier output amplified signal pulse and an optical parametric amplifier output unconverted pump pulse. The optical parametric amplifier output amplified signal pulse and the optical parametric amplifier output laser pulse are directed into a laser amplifier producing a laser amplifier output pulse. The laser amplifier output pulse is compressed to produce a recompressed hybrid chirped pulse amplification pulse.

  9. Hybrid Inflation Exit through Tunneling

    E-Print Network [OSTI]

    Bjorn Garbrecht; Thomas Konstandin

    2006-10-24

    For hybrid inflationary potentials, we derive the tunneling rate from field configurations along the flat direction towards the waterfall regime. This process competes with the classically rolling evolution of the scalar fields and needs to be strongly subdominant for phenomenologically viable models. Tunneling may exclude models with a mass scale below 10^12 GeV, but can be suppressed by small values of the coupling constants. We find that tunneling is negligible for those models, which do not require fine tuning in order to cancel radiative corrections, in particular for GUT-scale SUSY inflation. In contrast, electroweak scale hybrid inflation is not viable, unless the inflaton-waterfall field coupling is smaller than approximately 10^-11.

  10. Hybrid quantum repeater with encoding

    E-Print Network [OSTI]

    Nadja K. Bernardes; Peter van Loock

    2012-11-02

    We present an encoded hybrid quantum repeater scheme using qubit-repetition and Calderbank-Shor-Steane codes. For the case of repetition codes, we propose an explicit implementation of the quantum error-correction protocol. Moreover, we analyze the entangled-pair distribution rate for the hybrid quantum repeater with encoding and we clearly identify a triple trade-off between the efficiency of the codes, the memory decoherence time, and the local gate errors. Finally, we show that in the presence of reasonable imperfections our system can achieve rates of roughly 24 Hz per memory for 20 km repeater spacing, a final distance of 1280 km, and a final fidelity of about 0.95.

  11. Planar slot coupled microwave hybrid

    DOE Patents [OSTI]

    Petter, Jeffrey K. (Williston, VT)

    1991-01-01

    A symmetrical 180.degree. microwave hybrid is constructed by opening a slot line in a ground plane below a conducting strip disposed on a dielectric substrate, creating a slot coupled conductor. Difference signals propagating on the slot coupled conductor are isolated on the slot line leaving sum signals to propagate on the microstrip. The difference signal is coupled from the slot line onto a second microstrip line for transmission to a desired location. The microstrip branches in a symmetrical fashion to provide the input/output ports of the 180.degree. hybrid. The symmetry of the device provides for balance and isolation between sum and difference signals, and provides an advantageous balance between the power handling capabilities and the bandwidth of the device.

  12. Hybrid metric-Palatini gravity

    E-Print Network [OSTI]

    Capozziello, Salvatore; Koivisto, Tomi S; Lobo, Francisco S N; Olmo, Gonzalo J

    2015-01-01

    Recently, the phenomenology of f(R) gravity has been scrutinized motivated by the possibility to account for the self-accelerated cosmic expansion without invoking dark energy sources. Besides, this kind of modified gravity is capable of addressing the dynamics of several self-gravitating systems alternatively to the presence of dark matter. It has been established that both metric and Palatini versions of these theories have interesting features but also manifest severe and different downsides. A hybrid combination of theories, containing elements from both these two formalisms, turns out to be also very successful accounting for the observed phenomenology and is able to avoid some drawbacks of the original approaches. This article reviews the formulation of this hybrid metric-Palatini approach and its main achievements in passing the local tests and in applications to astrophysical and cosmological scenarios, where it provides a unified approach to the problems of dark energy and dark matter.

  13. Superheat Control: A Hybrid Approach 

    E-Print Network [OSTI]

    Elliot, M.S.; Rasmussen, B.P.; Walton, Z.; Bolding, B.

    2009-01-01

    , poorly tuned EEVs can still exhibit undesirable behavior, and frequent valve adjustments raise concerns about device longevity. In this work, we propose a cascaded control approach, which regulates evapo- rator pressure and superheat and is achieved... with a feedback control device that uses a hybrid of mechanical and electronic feedback. Analysis of the fundamental dynamic behavior of evapo- rator superheat motivates this approach, while experimental evaluation of two separate systems demonstrates...

  14. Moisture absorption in hybrid composites 

    E-Print Network [OSTI]

    Clark, Dan Laro

    1983-01-01

    Moisture Analysis for Steady State Boundary Conditions", Journal of Com osite Materials, Vol. 15, March 1981, pp. 142-152. 7. Weitsman, Y. , Priorate Communication, Texas A&M University, January 1983. 8. Wirth, Patricia E. and Rodin, Ervin Y. , "A... of Department) December 1983 111. ABSTRACT Moisture Absorption in Hybrid Composites (December 1983) Dan Laro Clark, B. S. Aerospace Engineering Texas A&M University Co-Chairmen of Advisory Comnittee: Dr. Y. Weitsman Dr. W. J. Horn This thesis presents...

  15. Compositional Variation Within Hybrid Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit the following commentsMethodsCompositional Variation Within Hybrid

  16. Hybrid and Plug-in Electric Vehicles

    SciTech Connect (OSTI)

    2014-05-20

    Hybrid and plug-in electric vehicles use electricity either as their primary fuel or to improve the efficiency of conventional vehicle designs. This new generation of vehicles, often called electric drive vehicles, can be divided into three categories: hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles(PHEVs), and all-electric vehicles (EVs). Together, they have great potential to reduce U.S. petroleum use.

  17. Hybrid States from Constituent Glue Model

    E-Print Network [OSTI]

    F. Iddir; L. Semlala

    2007-12-11

    The hybrid meson is one of the most interesting new hadron specie beyond the naive quark model. It acquire a great attention both from the theoretical and experimental efforts. Many good candidates have been claimed to be observed, but there is no absolute confirmation about existence of hybrid mesons. In the present work we propose new calculations of the masses and decay widths of the hybrid mesons in the context of constituent gluon model.

  18. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hybrid Rotaxanes: Interlocked Structures for Quantum Computing? Print Rotaxanes are mechanically interlocked molecular architectures consisting of a dumbbell-shaped molecule, the...

  19. Hybrid Performance of the Pierre Auger Observatory

    E-Print Network [OSTI]

    B. R. Dawson; for the Pierre Auger Collaboration

    2007-06-08

    A key feature of the Pierre Auger Observatory is its hybrid design, in which ultra high energy cosmic rays are detected simultaneously by fluorescence telescopes and a ground array. The two techniques see air showers in complementary ways, providing important cross-checks and measurement redundancy. Much of the hybrid capability stems from the accurate geometrical reconstruction it achieves, with accuracy better than either the ground array detectors or a single telescope could achieve independently. We have studied the geometrical and longitudinal profile reconstructions of hybrid events. We present the results for the hybrid performance of the Observatory, including trigger efficiency, energy and angular resolution, and the efficiency of the event selection.

  20. Hybrid slab-microchannel gel electrophoresis system

    DOE Patents [OSTI]

    Balch, Joseph W. (Livermore, CA); Carrano, Anthony V. (Livermore, CA); Davidson, James C. (Livermore, CA); Koo, Jackson C. (San Ramon, CA)

    1998-01-01

    A hybrid slab-microchannel gel electrophoresis system. The hybrid system permits the fabrication of isolated microchannels for biomolecule separations without imposing the constraint of a totally sealed system. The hybrid system is reusable and ultimately much simpler and less costly to manufacture than a closed channel plate system. The hybrid system incorporates a microslab portion of the separation medium above the microchannels, thus at least substantially reducing the possibility of non-uniform field distribution and breakdown due to uncontrollable leakage. A microslab of the sieving matrix is built into the system by using plastic spacer materials and is used to uniformly couple the top plate with the bottom microchannel plate.

  1. Ultracapacitors and Batteries in Hybrid Vehicles

    SciTech Connect (OSTI)

    Pesaran, A.; Markel, T.; Zolot, M.; Sprik, S.

    2005-08-01

    Using an ultracapacitor in conjunction with a battery in a hybrid vehicle combines the power performance of the former with the greater energy storage capability of the latter.

  2. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    cycle gas turbine power plant carbon capture and storagewind hybrid combined cycle power plant natural gas combinedPower Plants study, Volume 1: Bituminous Coal and Natural Gas

  3. A verification framework for hybrid systems

    E-Print Network [OSTI]

    Mitra, Sayan

    2007-01-01

    Combining; discrete state transitions with differential equations, Hybrid system models provide an expressive formalism for describing software systems that interact with a physical environment. Automatically checking ...

  4. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is such that many related structures can be made from similar basic building blocks. The synthesis of hybrid organic-inorganic rotaxanes, with the magnetically active metal sites...

  5. Probing Compositional Variation within Hybrid Nanostructures

    E-Print Network [OSTI]

    Yuhas, Benjamin D.

    2010-01-01

    Charge Retention and Photocatalysis with Hybrid CdSe?Ausensing, 14,15 and photocatalysis. 16?23 In particular, the

  6. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    IGCC PC advanced coal-wind hybrid combined cycle power plantnatural gas combined cycle gas turbine power plant carboncrude gasification combined cycle power plant with carbon

  7. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    THAT MIGHT REDUCE HYBRID IMPACT ON OIL CONSUMPTION AND GHGhave been reduced, oil consumption continues to create2010, United States VMT Oil consumption GHG 2010, California

  8. Plug-In Hybrid Electric Vehicles (Presentation)

    SciTech Connect (OSTI)

    Markel, T.

    2006-05-08

    Provides an overview on the current status, long-term prospects, and key challenges in the development of plug-in hybrid electric vehicle technology.

  9. Kit for detecting nucleic acid sequences using competitive hybridization probes

    DOE Patents [OSTI]

    Lucas, Joe N. (San Ramon, CA); Straume, Tore (Tracy, CA); Bogen, Kenneth T. (Walnut Creek, CA)

    2001-01-01

    A kit is provided for detecting a target nucleic acid sequence in a sample, the kit comprising: a first hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a first portion of the target sequence, the first hybridization probe including a first complexing agent for forming a binding pair with a second complexing agent; and a second hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a second portion of the target sequence to which the first hybridization probe does not selectively hybridize, the second hybridization probe including a detectable marker; a third hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a first portion of the target sequence, the third hybridization probe including the same detectable marker as the second hybridization probe; and a fourth hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a second portion of the target sequence to which the third hybridization probe does not selectively hybridize, the fourth hybridization probe including the first complexing agent for forming a binding pair with the second complexing agent; wherein the first and second hybridization probes are capable of simultaneously hybridizing to the target sequence and the third and fourth hybridization probes are capable of simultaneously hybridizing to the target sequence, the detectable marker is not present on the first or fourth hybridization probes and the first, second, third, and fourth hybridization probes each include a competitive nucleic acid sequence which is sufficiently complementary to a third portion of the target sequence that the competitive sequences of the first, second, third, and fourth hybridization probes compete with each other to hybridize to the third portion of the target sequence.

  10. SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1997. Companies Participating in the 1997 Corn Hybrid Trials

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    1 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1997. Companies Participating in the 1997 Corn Hybrid COLUMBIA PLAINVIEW TX 79072 NORTHRUP KING CO. NORTHRUP KING PO BOX 959 MINNEAPOLIS MN 55440 PIONEER HI, INC. WILSON PO BOX 391 HARLAN IA 51537 VIRGINIA CORN HYBRID TRIALS IN 1997 Coordinated by H. Behl, E

  11. Greenhouse Gas Emissions from Aviation and Marine Transportation: Mitigation Potential and Policies

    E-Print Network [OSTI]

    McCollum, David L; Gould, Gregory; Greene, David L

    2010-01-01

    cycle or diesel-electric engines, and optimized hull andcycle or diesel-electric engines, and optimized hull andof smaller diesel-electric engines, each optimized for a

  12. The impact of hybridization on morphological variation on Xiphophorus fishes 

    E-Print Network [OSTI]

    Macedo, Danielle Carter de

    2013-02-04

    Hybridization can produce novel phenotypic variation which may allow hybrid populations to evolve in novel directions relative to parentals. Hybridization can produce intermediate as well as extreme phenotypes with respect to the parent species...

  13. Hybrid Multiscale Methods I. Hyperbolic Relaxation Giacomo Dimarco

    E-Print Network [OSTI]

    Dimarco, Giacomo

    Hybrid Multiscale Methods I. Hyperbolic Relaxation Problems Giacomo Dimarco Lorenzo Pareschi Abstract In this paper we consider the development of hybrid numerical methods for the solution hybrid representation of the solution. After the introduction of the different schemes the performance

  14. A Hybrid-Filter Approach to Turbulence Simulation

    E-Print Network [OSTI]

    Rajamani, Bernie; Kim, John

    2010-01-01

    M. : Properties of the hybrid RANS/LES filter. Theor.1765 (1991) 6. Hamba, F. : A hybrid RANS/LES simulation of2003) 12. Rajamani, B. : Hybrid RANS-LES modeling of High-Re

  15. MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP

    E-Print Network [OSTI]

    MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr.................................................................................................................... 16 MODELING OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS

  16. Hybrid spread spectrum radio system

    DOE Patents [OSTI]

    Smith, Stephen F. (London, TN); Dress, William B. (Camas, WA)

    2010-02-02

    Systems and methods are described for hybrid spread spectrum radio systems. A method includes modulating a signal by utilizing a subset of bits from a pseudo-random code generator to control an amplification circuit that provides a gain to the signal. Another method includes: modulating a signal by utilizing a subset of bits from a pseudo-random code generator to control a fast hopping frequency synthesizer; and fast frequency hopping the signal with the fast hopping frequency synthesizer, wherein multiple frequency hops occur within a single data-bit time.

  17. Hybrids Plus | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam: Energyarea,Magazine JumpEnergyHyEnergy SystemsHybrids Plus

  18. hybridTalk1.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years5/04 |3 The RetrievalHybrid

  19. Hybrid Locomotive | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHoursaUSHumanHunting forHybridTier

  20. Advanced, Energy-Efficient Hybrid Membrane System for Industrial...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced, Energy- Efficient Hybrid Membrane System for Industrial Water Reuse New Hybrid Membrane System Utilizes Industrial Waste Heat to Power Water Purification Process As...

  1. Microfluidics: Kinetics of Hybridized DNA With Fluid Flow Variations...

    Office of Scientific and Technical Information (OSTI)

    Conference: Microfluidics: Kinetics of Hybridized DNA With Fluid Flow Variations. Citation Details In-Document Search Title: Microfluidics: Kinetics of Hybridized DNA With Fluid...

  2. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    Moderate Hybrid-electric Vehicles. ESScap06, Switzerland,GH. SIMPLEV: A Simple Electric Vehicle Simulation Program-Ultracapacitors in Hybrid- electric Vehicle Applications.

  3. Hybrid Vehicles: Cut Pollution & Save Money | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicles: Cut Pollution & Save Money Hybrid Vehicles: Cut Pollution & Save Money Below is information about the student activitylesson plan from your search. Grades 5-8...

  4. Hybrid Polymer/Lipid Vesicles via Salt and Agitation Induced...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Hybrid PolymerLipid Vesicles via Salt and Agitation Induced Fusion. Citation Details In-Document Search Title: Hybrid PolymerLipid Vesicles via Salt and...

  5. User-Oriented Modeling Tools for Advanced Hybrid and Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User-Oriented Modeling Tools for Advanced Hybrid and Climate-Appropriate Rooftop Air Conditioners User-Oriented Modeling Tools for Advanced Hybrid and Climate-Appropriate Rooftop...

  6. Building America Webinar: New Construction Hybrid-Ductless Heat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study:...

  7. Hybrid and Plug-In Electric Vehicles (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-05-01

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  8. Hybrid and Plug-In Electric Vehicles (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  9. Hybrid solar collector using nonimaging optics and photovoltaic components

    E-Print Network [OSTI]

    2015-01-01

    and Yablonovitch, E. , Hybrid solar system, USA Provisionaland Yablonovitch, E. , Hybrid solar system, USA ProvisionalEfficiency/power Correlations,” Solar Energy, 83 (5), 614–

  10. Hybrid Solar Cells based on Gallium Arsenide Nanopillars

    E-Print Network [OSTI]

    Haddad, Michael Anthony

    2014-01-01

    Polymer-Based Organic Solar Cells. Chemical Reviews, 2007.et al. , Hybrid Heterojunction Solar Cell Based on Organic–styrenesulfonate) hybrid solar cells. Nanotechnology, 2010.

  11. Vehicle Technologies Office: Materials for Hybrid and Electric...

    Office of Environmental Management (EM)

    Hybrid and Electric Drive Systems Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems The Vehicle Technologies Office (VTO) is working to lower the cost...

  12. Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid Buses Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid Buses Emissions and fuel economy data were...

  13. 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicle Systems Technologies 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities...

  14. Building America Webinar: New Construction Hybrid-Ductless Heat...

    Energy Savers [EERE]

    Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile...

  15. Texas Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructu...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructure Technology Showcase Texas Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructure Technology Showcase...

  16. Fuel economy and emissions reduction of HD hybrid truck over...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    economy and emissions reduction of HD hybrid truck over transient driving cycles and interstate roads Fuel economy and emissions reduction of HD hybrid truck over transient driving...

  17. Hybrid fs/ps Rotational CARS Temperature and Concentration Measurement...

    Office of Scientific and Technical Information (OSTI)

    Hybrid fsps Rotational CARS Temperature and Concentration Measurements Using Two Different ps-Duration Probe Beams. Citation Details In-Document Search Title: Hybrid fsps...

  18. Cold-Start Emissions Control in Hybrid Vehicles Equipped with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for Hydrocarbons and NOx Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for...

  19. 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicle Systems Technologies 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities...

  20. AVTA: Idaho National Laboratory Experimental Hybrid Shuttle Bus...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Idaho National Laboratory Experimental Hybrid Shuttle Bus Testing Results AVTA: Idaho National Laboratory Experimental Hybrid Shuttle Bus Testing Results The Vehicle Technologies...

  1. 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicle Systems Technologies 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities...

  2. Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture...

    Office of Scientific and Technical Information (OSTI)

    Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture Citation Details In-Document Search Title: Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture...

  3. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    batteries and ultracapacitors for electric vehicles. EVS24Battery, Hybrid and Fuel Cell Electric Vehicle Symposiumpublications on electric and hybrid vehicle technology and

  4. Modeling and Optimization of Hybrid Solar Thermoelectric Systems...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Modeling and Optimization of Hybrid Solar Thermoelectric Systems with Thermosyphons Citation Details In-Document Search Title: Modeling and Optimization of Hybrid...

  5. Oligo and Poly-thiophene/Zno Hybrid Nanowire Solar Cells

    E-Print Network [OSTI]

    Briseno, Alejandro L.

    2010-01-01

    less than organic bulk heterojunction solar cells. Knowledgean organic/inorganic hybrid single nanowire solar cell. End-of individual organic/inorganic hybrid nanowire solar cells.

  6. Hybrid Electric Systems: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    Fact sheet describes the work EERE is doing in the areas of hybrid, plug-in hybrid, and all-electric vehicles.

  7. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    in batteries, ultracapacitors, fuel cells and hybrid vehicleBattery, Hybrid and Fuel Cell Electric Vehicle Symposiumcycles. Vehicles with the fuel cell operating in the optimum

  8. Building America Webinar: New Construction Hybrid-Ductless Heat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile This...

  9. Environmental Assessment of Plug-In Hybrid Electric Vehicles...

    Energy Savers [EERE]

    Environmental Assessment of Plug-In Hybrid Electric Vehicles Volume 1: Nationwide Greenhouse Gas Emissions Environmental Assessment of Plug-In Hybrid Electric Vehicles Volume 1:...

  10. Advanced Methods Approach to Hybrid Powertrain Systems Optimization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Methods Approach to Hybrid Powertrain Systems Optimization of a Transit Bus Application Advanced Methods Approach to Hybrid Powertrain Systems Optimization of a Transit Bus...

  11. NSF/DOE Thermoelectric Partnership: Inorganic-Organic Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inorganic-Organic Hybrid Thermoelectrics NSFDOE Thermoelectric Partnership: Inorganic-Organic Hybrid Thermoelectrics 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle...

  12. Project Profile: Hybrid Organic Silicone HTF Utilizing Endothermic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Organic Silicone HTF Utilizing Endothermic Chemical Reactions for Latent Heat Storage Project Profile: Hybrid Organic Silicone HTF Utilizing Endothermic Chemical Reactions...

  13. GAL4 Two-Hybrid Vectors Handbook

    E-Print Network [OSTI]

    Erickson, F. Les

    Libraries FOR RESEARCH USE ONLY (PR6X890) #12;MATCHMAKER GAL4 Two-Hybrid Vectors Handbook CLONTECH used in the yeast GAL4-based MATCHMAKER Two-Hybrid Systems and Libraries. For ease of use on synthetic defined medium lacking tryptophan or leucine, respectively. The nutritional markers also allow

  14. Hybrid Nanogenerator for Concurrently Harvesting Biomechanical and

    E-Print Network [OSTI]

    Wang, Zhong L.

    -scale energy con- version, renewable and green energy, efficient energy transmission, energy stor- age, energy, and breathing. If efficiently harvested to its full potential, many of the modern energy requirements needed we present a hybrid energy scavenging device for potential in vivo applications. The hybrid device

  15. Intuitionistic Hybrid Logic Torben Brauner a,1

    E-Print Network [OSTI]

    de Paiva, Valeria

    to hybridize constructive modal logics. Alternative systems are discussed, but we fix on a reasonable and well deduction formulation of it. Our nat- ural deduction system is also extended with additional inference rules give natural deduction systems in a uniform way for a wide class of constructive hybrid logics

  16. Discrete and Hybrid Nonholonomy Antonio Bicchi1

    E-Print Network [OSTI]

    Piccoli, Benedetto

    Discrete and Hybrid Nonholonomy Antonio Bicchi1 , Alessia Marigo2 , and Benedetto Piccoli3 1 Centro such as cars, trucks with trailers, rolling 3D objects, underactuated mechanisms, satellites, etc., has made of systems, allowing for discrete and hybrid (mixed continuous and discrete) configurations and transi- tions

  17. NETL's Hybrid Performance, or Hyper, facility

    SciTech Connect (OSTI)

    2013-06-12

    NETL's Hybrid Performance, or Hyper, facility is a one-of-a-kind laboratory built to develop control strategies for the reliable operation of fuel cell/turbine hybrids and enable the simulation, design, and implementation of commercial equipment. The Hyper facility provides a unique opportunity for researchers to explore issues related to coupling fuel cell and gas turbine technologies.

  18. NETL's Hybrid Performance, or Hyper, facility

    ScienceCinema (OSTI)

    None

    2014-06-26

    NETL's Hybrid Performance, or Hyper, facility is a one-of-a-kind laboratory built to develop control strategies for the reliable operation of fuel cell/turbine hybrids and enable the simulation, design, and implementation of commercial equipment. The Hyper facility provides a unique opportunity for researchers to explore issues related to coupling fuel cell and gas turbine technologies.

  19. Implementation Hybrid Trace Verifier (HTV) implements our

    E-Print Network [OSTI]

    Liberzon, Daniel

    to larger problems. References [1] S. Mitra. A Verification Framework for Hybrid Systems. PhD thesis. [3] A. Fehnker and F. Ivaneie. Benchmarks for hybrid systems verification. HSCC, 2993, 2004. A satellite maneuver system. 3. A version of room heating benchmark. 4. An engine control system

  20. Hybrid Modeling of Communication Networks Using Modelica

    E-Print Network [OSTI]

    Hespanha, João Pedro

    Hybrid Modeling of Communication Networks Using Modelica Daniel F¨arnqvist, Katrin Strandemar, Karl is to describe initial work on modeling packet-switched communication network us- ing Modelica [1], [8], which that the hybrid model is suitable for Modelica. More- over, we show that the model can then be efficiently simu

  1. Exotic hybrid mesons with light quarks

    E-Print Network [OSTI]

    Claude Bernard; Tom Blum; Thomas A. DeGrand; Carleton DeTar; Steven Gottlieb; Urs. M. Heller; Jim Hetrick; Craig McNeile; Kari Rummukainen; Bob Sugar; Doug Toussaint; Matt Wingate

    1996-07-12

    Hybrid mesons, made from a quark, an antiquark and gluons, can have quantum numbers inaccessible to conventional quark-antiquark states. Confirmation of such states would give information on the role of "dynamical" color in low energy QCD. We present preliminary results for hybrid meson masses using light Wilson valence quarks.

  2. Quantum technologies with hybrid systems

    E-Print Network [OSTI]

    G. Kurizki; P. Bertet; Y. Kubo; K. Mølmer; D. Petrosyan; P. Rabl; J. Schmiedmayer

    2015-04-01

    An extensively pursued current direction of research in physics aims at the development of practical technologies that exploit the effects of quantum mechanics. As part of this ongoing effort, devices for information processing, secure communication and high-precision sensing are being implemented with diverse systems, ranging from photons, atoms and spins to mesoscopic superconducting and nanomechanical structures. Their physical properties make some of these systems better suited than others for specific tasks; thus, photons are well suited for transmitting quantum information, weakly interacting spins can serve as long-lived quantum memories, and superconducting elements can rapidly process information encoded in their quantum states. A central goal of the envisaged quantum technologies is to develop devices that can simultaneously perform several of these tasks, namely, reliably store, process, and transmit quantum information. Hybrid quantum systems composed of different physical components with complementary functionalities may provide precisely such multi-tasking capabilities. This article reviews some of the driving theoretical ideas and first experimental realizations of hybrid quantum systems and the opportunities and the challenges they present and offers a glance at the near- and long-term perspectives of this fascinating and rapidly expanding field.

  3. Ultra-thin microporous/hybrid materials

    DOE Patents [OSTI]

    Jiang, Ying-Bing (Albuquerque, NM); Cecchi, Joseph L. (Albuquerque, NM); Brinker, C. Jeffrey (Albuquerque, NM)

    2012-05-29

    Ultra-thin hybrid and/or microporous materials and methods for their fabrication are provided. In one embodiment, the exemplary hybrid membranes can be formed including successive surface activation and reaction steps on a porous support that is patterned or non-patterned. The surface activation can be performed using remote plasma exposure to locally activate the exterior surfaces of porous support. Organic/inorganic hybrid precursors such as organometallic silane precursors can be condensed on the locally activated exterior surfaces, whereby ALD reactions can then take place between the condensed hybrid precursors and a reactant. Various embodiments can also include an intermittent replacement of ALD precursors during the membrane formation so as to enhance the hybrid molecular network of the membranes.

  4. Space and power efficient hybrid counters array

    DOE Patents [OSTI]

    Gara, Alan G. (Mount Kisco, NY); Salapura, Valentina (Chappaqua, NY)

    2010-03-30

    A hybrid counter array device for counting events. The hybrid counter array includes a first counter portion comprising N counter devices, each counter device for receiving signals representing occurrences of events from an event source and providing a first count value corresponding to a lower order bits of the hybrid counter array. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits of the hybrid counter array. A control device monitors each of the N counter devices of the first counter portion and initiates updating a value of a corresponding second count value stored at the corresponding addressable memory location in the second counter portion. Thus, a combination of the first and second count values provide an instantaneous measure of number of events received.

  5. Space and power efficient hybrid counters array

    DOE Patents [OSTI]

    Gara, Alan G. (Mount Kisco, NY); Salapura, Valentina (Chappaqua, NY)

    2009-05-12

    A hybrid counter array device for counting events. The hybrid counter array includes a first counter portion comprising N counter devices, each counter device for receiving signals representing occurrences of events from an event source and providing a first count value corresponding to a lower order bits of the hybrid counter array. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits of the hybrid counter array. A control device monitors each of the N counter devices of the first counter portion and initiates updating a value of a corresponding second count value stored at the corresponding addressable memory location in the second counter portion. Thus, a combination of the first and second count values provide an instantaneous measure of number of events received.

  6. Hybridization and Selective Release of DNA Microarrays

    SciTech Connect (OSTI)

    Beer, N R; Baker, B; Piggott, T; Maberry, S; Hara, C M; DeOtte, J; Benett, W; Mukerjee, E; Dzenitis, J; Wheeler, E K

    2011-11-29

    DNA microarrays contain sequence specific probes arrayed in distinct spots numbering from 10,000 to over 1,000,000, depending on the platform. This tremendous degree of multiplexing gives microarrays great potential for environmental background sampling, broad-spectrum clinical monitoring, and continuous biological threat detection. In practice, their use in these applications is not common due to limited information content, long processing times, and high cost. The work focused on characterizing the phenomena of microarray hybridization and selective release that will allow these limitations to be addressed. This will revolutionize the ways that microarrays can be used for LLNL's Global Security missions. The goals of this project were two-fold: automated faster hybridizations and selective release of hybridized features. The first study area involves hybridization kinetics and mass-transfer effects. the standard hybridization protocol uses an overnight incubation to achieve the best possible signal for any sample type, as well as for convenience in manual processing. There is potential to significantly shorten this time based on better understanding and control of the rate-limiting processes and knowledge of the progress of the hybridization. In the hybridization work, a custom microarray flow cell was used to manipulate the chemical and thermal environment of the array and autonomously image the changes over time during hybridization. The second study area is selective release. Microarrays easily generate hybridization patterns and signatures, but there is still an unmet need for methodologies enabling rapid and selective analysis of these patterns and signatures. Detailed analysis of individual spots by subsequent sequencing could potentially yield significant information for rapidly mutating and emerging (or deliberately engineered) pathogens. In the selective release work, optical energy deposition with coherent light quickly provides the thermal energy to single spots to release hybridized DNA. This work leverages LLNL expertise in optics, microfluids, and bioinformatics.

  7. Fleet Services Fleet Services Facility

    E-Print Network [OSTI]

    Beex, A. A. "Louis"

    · 287 rental vehicles: economy, hybrid, standard and large cars, mini and 12 passenger and cargo vans, pickup trucks, buses, and police cars. · 2 buses with drivers: 20 passenger and 44passenger · 10

  8. Hybrid Systems with Finite Bisimulations Gerardo Lafferriere1

    E-Print Network [OSTI]

    Pappas, George J.

    Hybrid Systems with Finite Bisimulations Gerardo Lafferriere1 , George J. Pappas2 , and Shankar is one of the main approach- es to hybrid system analysis. Decidability questions for verification algo classes of planar hybrid systems. 1 Introduction Hybrid systems consist of finite state machines

  9. Hybrid coupled modeling of the tropical Pacific using neural networks

    E-Print Network [OSTI]

    Hsieh, William

    Hybrid coupled modeling of the tropical Pacific using neural networks Shuyong Li, William W. Hsieh To investigate the potential for improving hybrid coupled models (HCM) of the tropical Pacific by the use: dynamical coupled models, statistical models and hybrid coupled models [Barnston et al., 1994]. A hybrid

  10. Hybrid optimal control Notes for CIRA course, Bertinoro 2003.

    E-Print Network [OSTI]

    Piccoli, Benedetto

    Hybrid optimal control Notes for CIRA course, Bertinoro 2003. Benedetto Piccoli # Abstract. These notes are devoted to the use of some analytical tools for hybrid optimal control. After introducing basic notations for a quite general class of hybrid systems, we state both the Hybrid Maximum Principle

  11. Study of Phase Selectivity of Organic-Inorganic Hybrid Semiconductors

    E-Print Network [OSTI]

    Li, Jing

    observation of the phase selection for these hybrid materials. Introduction Hybrid organic_Youn_Moon@nrel.gov. Present address: University of Texas, Austin, TX 78712. (1) Handbook of Organic-Inorganic Hybrid MaterialsArticles Study of Phase Selectivity of Organic-Inorganic Hybrid Semiconductors Chang-Youn Moon

  12. Powertrain system for a hybrid electric vehicle

    DOE Patents [OSTI]

    Reed, Jr., Richard G. (Royal Oak, MI); Boberg, Evan S. (Hazel Park, MI); Lawrie, Robert E. (Whitmore Lake, MI); Castaing, Francois J. (Bloomfield Township, MI)

    1999-08-31

    A hybrid electric powertrain system is provided including an electric motor/generator drivingly engaged with the drive shaft of a transmission. The electric is utilized for synchronizing the rotation of the drive shaft with the driven shaft during gear shift operations. In addition, a mild hybrid concept is provided which utilizes a smaller electric motor than typical hybrid powertrain systems. Because the electric motor is drivingly engaged with the drive shaft of the transmission, the electric motor/generator is driven at high speed even when the vehicle speed is low so that the electric motor/generator provides more efficient regeneration.

  13. Powertrain system for a hybrid electric vehicle

    DOE Patents [OSTI]

    Reed, R.G. Jr.; Boberg, E.S.; Lawrie, R.E.; Castaing, F.J.

    1999-08-31

    A hybrid electric powertrain system is provided including an electric motor/generator drivingly engaged with the drive shaft of a transmission. The electric is utilized for synchronizing the rotation of the drive shaft with the driven shaft during gear shift operations. In addition, a mild hybrid concept is provided which utilizes a smaller electric motor than typical hybrid powertrain systems. Because the electric motor is drivingly engaged with the drive shaft of the transmission, the electric motor/generator is driven at high speed even when the vehicle speed is low so that the electric motor/generator provides more efficient regeneration. 34 figs.

  14. Optimal Power Management for a Hydraulic Hybrid Delivery Truck

    E-Print Network [OSTI]

    Peng, Huei

    demonstrate characteristics that are very different fromtheir electric counterparts, thus requiring unique characteristics of hydraulic components, and minimizes disadvantages of low energy density, to achieve enhanced faster rate than that of passenger cars. This is a consequence of increased proportion of light trucks

  15. Copyright 2013 Gaia Geothermal, LLC 1Hybrid Design Slide 1.1 -Hybrid Design with the New GLD

    E-Print Network [OSTI]

    .1 - Modified design day loopfield loads are displayed and heat pump performanceCopyright © 2013 ­ Gaia Geothermal, LLC 1Hybrid Design ­ Slide 1.1 - Hybrid Design Geothermal, LLC 2Hybrid Design ­ Slide 1.1 - The new hybrid design tool in GLD provides: · Precision peak

  16. INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1999 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1999.

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1999 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1999. Companies participating in the 1999 Corn Hybrid Trials 2 1999 Virginia Corn Hybird Plot Information and Management Practices 3 Table 1. 1999 Relative Yield of hybrids entered in three or more

  17. Issue 5: High Interest in Hybrid Cars

    E-Print Network [OSTI]

    Ong, Paul M.; Haselhoff, Kim

    2005-01-01

    Reports. (2005). “Which Cars Would People Get Again? ” Con-Motor Trend Announces 2004 Car of the Year. ” Motor Trend,Oregon Hybrid Gas-Electric Car Owners. July. U.S. Internal

  18. Sensitivity analysis of oscillating hybrid systems

    E-Print Network [OSTI]

    Saxena, Vibhu Prakash

    2010-01-01

    Many models of physical systems oscillate periodically and exhibit both discrete-state and continuous-state dynamics. These systems are called oscillating hybrid systems and find applications in diverse areas of science ...

  19. Hybrid Membranes for Light Gas Separations 

    E-Print Network [OSTI]

    Liu, Ting

    2012-07-16

    Membrane separations provide a potentially attractive technology over conventional processes due to their advantages, such as low capital cost and energy consumption. The goal of this thesis is to design hybrid membranes that facilitate specific gas...

  20. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    Car problems Pollution from motor vehicles Crude oil,the pollution from any one new motor vehicle is slight,of hybrid vehicles will reduce oil use and pollution in the

  1. Renew Workshop on Fusion-Fission Hybrids

    E-Print Network [OSTI]

    for sustainability Fast burners ­ waste management Fast breeders ­ fuel supply #12;8 High Level Findings Potential and burners) Not a fair comparison! Hybrids assume advances in technology: materials and new fuel forms

  2. Rational design of hybrid organic solar cells

    E-Print Network [OSTI]

    Lentz, Levi (Levi Carl)

    2014-01-01

    In this thesis, we will present a novel design for a nano-structured organic-inorganic hybrid photovoltaic material that will address current challenges in bulk heterojunction (BHJ) organic-based solar cell materials. ...

  3. Knoxville Area Transit: Propane Hybrid Electric Trolleys

    SciTech Connect (OSTI)

    Not Available

    2005-04-01

    A 2-page fact sheet summarizing the evaluation done by the U.S. Department of Energy's Advanced Vehicle Testing Activity on the Knoxville Area Transit's use of propane hybrid electric trolleys.

  4. Hybrid zones in Rhododendron subsection Taliensia 

    E-Print Network [OSTI]

    Marczewski, Tobias

    2011-06-27

    The investigation of hybrid zones has proven to be one of the most promising approaches to advance our understanding of species barriers, and to elucidate evolutionary processes involved in speciation. Due to the improvement ...

  5. Control system for a hybrid powertrain system

    DOE Patents [OSTI]

    Naqvi, Ali K.; Demirovic, Besim; Gupta, Pinaki; Kaminsky, Lawrence A.

    2014-09-09

    A vehicle includes a powertrain with an engine, first and second torque machines, and a hybrid transmission. A method for operating the vehicle includes operating the engine in an unfueled state, releasing an off-going clutch which when engaged effects operation of the hybrid transmission in a first continuously variable mode, and applying a friction braking torque to a wheel of the vehicle to compensate for an increase in an output torque of the hybrid transmission resulting from releasing the off-going clutch. Subsequent to releasing the off-going clutch, an oncoming clutch which when engaged effects operation of the hybrid transmission in a second continuously variable mode is synchronized. Subsequent to synchronization of the oncoming clutch, the oncoming clutch is engaged.

  6. Hybrid Pulsators -- Pulsating Stars with Multiple Identities

    E-Print Network [OSTI]

    Zhou, A -Y

    2015-01-01

    We have carried out a statistic survey on the pulsating variable stars with multiple identities. These stars were identified to exhibit two types of pulsation or multiple light variability types in the literature, and are usually called hybrid pulsators. We extracted the hybrid information based on the Simbad database. Actually, all the variables with multiple identities are retrieved. The survey covers various pulsating stars across the Hertzsprung-Russell diagram. We aim at giving a clue in selecting interesting targets for further observation. Hybrid pulsators are excellent targets for asteroseismology. An important implication of such stars is their potential in advancing the theories of both stellar evolution and pulsation. By presenting the statistics, we address the open questions and prospects regarding current status of hybrid pulsation studies.

  7. Lattice study of hybrid static potentials

    E-Print Network [OSTI]

    Philipp Wolf; Marc Wagner

    2015-02-02

    We report about a recently started project with the aim to compute hybrid static potentials using lattice gauge theory. First preliminary results for pure SU(2) Yang-Mills theory are presented.

  8. Hybrid redundant robot Robotic Hands for

    E-Print Network [OSTI]

    Simaan, Nabil

    Hybrid redundant robot Robotic Hands for Quaternion representation Singularity Analysis using line geometry NEW COURSE (Spring 2011) ME392-02: Special Topics: ADVANCED TOPICS IN ROBOTICS AND MECHANISM SYNTHESIS Instructor: N. Simaan Prerequisites: Linear algebra, Introduction to robotics; Recommended

  9. Enhancing Interactive Web Applications in Hybrid Networks

    E-Print Network [OSTI]

    Venkataramani, Arun

    Enhancing Interactive Web Applications in Hybrid Networks Aruna Balasubramanian Brian Neil Levine into a one- shot request/response process. We deployed a prototype of Thedu on the DieselNet testbed

  10. HYBRID MODELING OF COMMUNICATION NETWORKS USING MODELICA

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    HYBRID MODELING OF COMMUNICATION NETWORKS USING MODELICA Daniel F¨arnqvist Katrin Strandemar and simulation of communication networks using the modeling language Modelica are discussed. Congestion control model, that Modelica provides an efficient platform for the analysis of communication networks

  11. Fuel Savings from Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Bennion, K.; Thornton, M.

    2009-03-01

    NREL's study shows that hybrid electric vehicles can significantly reduce oil imports for use in light-duty vehicles, particularly if drivers switch to smaller, more fuel-efficient vehicles overall.

  12. Reuse of hybrid car power systems

    E-Print Network [OSTI]

    Kirkby, Nicholas (Nicholas J.)

    2015-01-01

    Used hybrid car power systems are inexpensive and capable of tens of kilowatts of power throughput. This paper documents a process for using the second generation Toyota Prius inverter module to drive a three phase permanent ...

  13. HOPSPACK: Hybrid Optimization Parallel Search Package.

    SciTech Connect (OSTI)

    Gray, Genetha A.; Kolda, Tamara G.; Griffin, Joshua; Taddy, Matt; Martinez-Canales, Monica

    2008-12-01

    In this paper, we describe the technical details of HOPSPACK (Hybrid Optimization Parallel SearchPackage), a new software platform which facilitates combining multiple optimization routines into asingle, tightly-coupled, hybrid algorithm that supports parallel function evaluations. The frameworkis designed such that existing optimization source code can be easily incorporated with minimalcode modification. By maintaining the integrity of each individual solver, the strengths and codesophistication of the original optimization package are retained and exploited.4

  14. Hybrid ECAL: Optimization and Related Developments

    E-Print Network [OSTI]

    T. Suehara; H. Hirai; H. Sumida; H. Ueno; Y. Sudo; T. Yoshioka; K. Kawagoe

    2015-03-30

    Hybrid ECAL is a cost-conscious option of electromagnetic calorimeter (ECAL) for particle flow calorimetry to be used in a detector of International Linear Collider (ILC). It is a combination of silicon-tungsten ECAL, which realizes high granularity and robust measurement of electromagnetic shower, and scintillator-tungsten ECAL, which gives affordable cost with similar performance to silicon. Optimization and a data acquisition trial in a test bench for the hybrid ECAL are described in this article.

  15. Analysis of Hybrid Hydrogen Systems: Final Report

    SciTech Connect (OSTI)

    Dean, J.; Braun, R.; Munoz, D.; Penev, M.; Kinchin, C.

    2010-01-01

    Report on biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. Two hybrid systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at costs ($1.67/kg) within Department of Energy targets ($2.10/kg) for central biomass-derived hydrogen production while also providing value-added energy services to the electric grid.

  16. Hybrid ECAL: Optimization and Related Developments

    E-Print Network [OSTI]

    Suehara, T; Sumida, H; Ueno, H; Sudo, Y; Yoshioka, T; Kawagoe, K

    2015-01-01

    Hybrid ECAL is a cost-conscious option of electromagnetic calorimeter (ECAL) for particle flow calorimetry to be used in a detector of International Linear Collider (ILC). It is a combination of silicon-tungsten ECAL, which realizes high granularity and robust measurement of electromagnetic shower, and scintillator-tungsten ECAL, which gives affordable cost with similar performance to silicon. Optimization and a data acquisition trial in a test bench for the hybrid ECAL are described in this article.

  17. Graphene-Plasmonic Hybrid Platform for Label-Free SERS Biomedical Detection

    E-Print Network [OSTI]

    Wang, Pu

    2015-01-01

    silver nanoparticle hybrids for ultrasensitive single-optical anisotropy in hybrid graphene-metal nanoparticlesensitive graphene-plasmonic hybrid platform for label-free

  18. Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

    E-Print Network [OSTI]

    Howison, Mark

    2010-01-01

    W. , and Childs, H. (2010) MPI-hybrid parallelism for volumeHybrid Parallelism for Volume Rendering on Large, Multi-corecharacteristics of “hybrid” parallel program- ming and

  19. Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

    E-Print Network [OSTI]

    Howison, Mark

    2010-01-01

    Hybrid Parallelism for Volume Rendering on Large, Multi-corendings indicate that the hybrid-parallel implementation, atpassing against a “hybrid” parallel im- plementation, which

  20. DRAFT INTERIM REPORT: NATIONAL PROGRAM PLAN FOR PASSIVE AND HYBRID SOLAR HEATING AND COOLING

    E-Print Network [OSTI]

    Authors, Various

    2012-01-01

    passive and hybrid space heating systems. Space Cooling Aand hybrid solar heating and cooling systems. Experimentspassive, and hybrid systems for heating, cooling, and

  1. Seed Packaging and Seed Characteristics in a Raphanus Hybrid-Derived Lineage

    E-Print Network [OSTI]

    Heredia, Sylvia Margarita

    2012-01-01

    reproduction in the hybrid-derived invasive, California wildreproduction in the hybrid-derived invasive, California wildreproduction in the hybrid-derived invasive, California wild

  2. Lower hybrid wavepacket stochasticity revisited

    SciTech Connect (OSTI)

    Fuchs, V.; Krlín, L.; Pánek, R.; Preinhaelter, J.; Seidl, J.; Urban, J.

    2014-02-12

    Analysis is presented in support of the explanation in Ref. [1] for the observation of relativistic electrons during Lower Hybrid (LH) operation in EC pre-heated plasma at the WEGA stellarator [1,2]. LH power from the WEGA TE11 circular waveguide, 9 cm diameter, un-phased, 2.45 GHz antenna, is radiated into a B?0.5 T, Ðœ„n{sub e}?5×10{sup 17} 1/m{sup 3} plasma at T{sub e}?10 eV bulk temperature with an EC generated 50 keV component [1]. The fast electrons cycle around flux or drift surfaces with few collisions, sufficient for randomizing phases but insufficient for slowing fast electrons down, and thus repeatedly interact with the rf field close to the antenna mouth, gaining energy in the process. Our antenna calculations reveal a standing electric field pattern at the antenna mouth, with which we formulate the electron dynamics via a relativistic Hamiltonian. A simple approximation of the equations of motion leads to a relativistic generalization of the area-preserving Fermi-Ulam (F-U) map [3], allowing phase-space global stochasticity analysis. At typical WEGA plasma and antenna conditions, the F-U map predicts an LH driven current of about 230 A, at about 225 W of dissipated power, in good agreement with the measurements and analysis reported in [1].

  3. Hybrid systems process mixed wastes

    SciTech Connect (OSTI)

    Chertow, M.R.

    1989-10-01

    Some technologies, developed recently in Europe, combine several processes to separate and reuse materials from solid waste. These plants have in common, generally, that they are reasonably small, have a composting component for the organic portion, and often have a refuse-derived fuel component for combustible waste. Many European communities also have very effective drop-off center programs for recyclables such as bottles and cans. By maintaining the integrity of several different fractions of the waste, there is a less to landfill and less to burn. The importance of these hybrid systems is that they introduce in one plant an approach that encompasses the key concept of today's solid waste planning; recover as much as possible and landfill as little as possible. The plants also introduce various risks, particularly of finding secure markets. There are a number of companies offering various combinations of materials recovery, composting, and waste combustion. Four examples are included: multiple materials recovery and refuse-derived fuel production in Eden Prairie, Minnesota; multiple materials recovery, composting and refuse-derived fuel production in Perugia, Italy; composting, refuse-derived fuel, and gasification in Tolmezzo, Italy; and a front-end system on a mass burning waste-to-energy plant in Neuchatel, Switzerland.

  4. Parker Hybrid Hydraulic Drivetrain Demonstration

    SciTech Connect (OSTI)

    Collett, Raymond; Howland, James; Venkiteswaran, Prasad

    2014-03-31

    This report examines the benefits of Parker Hannifin hydraulic hybrid brake energy recovery systems used in commercial applications for vocational purposes. A detailed background on the problem statement being addressed as well as the solution set specific for parcel delivery will be provided. Objectives of the demonstration performed in high start & stop applications included opportunities in fuel usage reduction, emissions reduction, vehicle productivity, and vehicle maintenance. Completed findings during the demonstration period and parallel investigations with NREL, CALSTART, along with a literature review will be provided herein on this research area. Lastly, results identified in the study by third parties validated the savings potential in fuel reduction of on average of 19% to 52% over the baseline in terms of mpg (Lammert, 2014, p11), Parker data for parcel delivery vehicles in the field parallels this at a range of 35% - 50%, emissions reduction of 17.4% lower CO2 per mile and 30.4% lower NOx per mile (Gallo, 2014, p15), with maintenance improvement in the areas of brake and starter replacement, while leaving room for further study in the area of productivity in terms of specific metrics that can be applied and studied.

  5. Coherent hybrid electromagnetic field imaging

    DOE Patents [OSTI]

    Cooke, Bradly J. (Jemez Springs, NM); Guenther, David C. (Los Alamos, NM)

    2008-08-26

    An apparatus and corresponding method for coherent hybrid electromagnetic field imaging of a target, where an energy source is used to generate a propagating electromagnetic beam, an electromagnetic beam splitting means to split the beam into two or more coherently matched beams of about equal amplitude, and where the spatial and temporal self-coherence between each two or more coherently matched beams is preserved. Two or more differential modulation means are employed to modulate each two or more coherently matched beams with a time-varying polarization, frequency, phase, and amplitude signal. An electromagnetic beam combining means is used to coherently combine said two or more coherently matched beams into a coherent electromagnetic beam. One or more electromagnetic beam controlling means are used for collimating, guiding, or focusing the coherent electromagnetic beam. One or more apertures are used for transmitting and receiving the coherent electromagnetic beam to and from the target. A receiver is used that is capable of square-law detection of the coherent electromagnetic beam. A waveform generator is used that is capable of generation and control of time-varying polarization, frequency, phase, or amplitude modulation waveforms and sequences. A means of synchronizing time varying waveform is used between the energy source and the receiver. Finally, a means of displaying the images created by the interaction of the coherent electromagnetic beam with target is employed.

  6. HybridStore: An Efficient Data Management System for Hybrid Flash-Based Sensor Devices

    E-Print Network [OSTI]

    Baras, John S.

    HybridStore: An Efficient Data Management System for Hybrid Flash-Based Sensor Devices Baobing WangStore, a novel efficient resource- aware data management system for flash-based sensor devices to store and query, designing an efficient resource- aware data management system for flash-based sensor devices is a very

  7. Lyapunov-Like Conditions for the Existence of Zeno Behavior in Hybrid and Lagrangian Hybrid Systems

    E-Print Network [OSTI]

    Ames, Aaron

    Lyapunov-Like Conditions for the Existence of Zeno Behavior in Hybrid and Lagrangian Hybrid Systems Andrew Lamperski and Aaron D. Ames Abstract-- Lyapunov-like conditions that utilize generaliza- tions configuration space, we utilize our Lyapunov-like conditions to obtain easily verifiable necessary

  8. Optimal design of hybrid and non-hybrid fuel cell vehicles

    E-Print Network [OSTI]

    Papalambros, Panos

    Optimal design of hybrid and non-hybrid fuel cell vehicles by Jeongwoo Han A thesis submitted cell vehicles by Jeongwoo Han Chair: Panos Y. Papalambros Fuel cells are under development technology, however, still has many issues to be addressed for market acceptance. Several fuel cell vehicle

  9. Wind/Hybrid Electricity Applications

    SciTech Connect (OSTI)

    McDaniel, Lori

    2001-03-31

    Wind energy is widely recognized as the most efficient and cost effective form of new renewable energy available in the Midwest. New utility-scale wind farms (arrays of large turbines in high wind areas producing sufficient energy to serve thousands of homes) rival the cost of building new conventional forms of combustion energy plants, gas, diesel and coal power plants. Wind energy is not subject to the inflationary cost of fossil fuels. Wind energy can also be very attractive to residential and commercial electric customers in high wind areas who would like to be more self-sufficient for their energy needs. And wind energy is friendly to the environment at a time when there is increasing concern about pollution and climate change. However, wind energy is an intermittent source of power. Most wind turbines start producing small amounts of electricity at about 8-10 mph (4 meters per second) of wind speed. The turbine does not reach its rated output until the wind reaches about 26-28 mph (12 m/s). So what do you do for power when the output of the wind turbine is not sufficient to meet the demand for energy? This paper will discuss wind hybrid technology options that mix wind with other power sources and storage devices to help solve this problem. This will be done on a variety of scales on the impact of wind energy on the utility system as a whole, and on the commercial and small-scale residential applications. The average cost and cost-benefit of each application along with references to manufacturers will be given. Emerging technologies that promise to shape the future of renewable energy will be explored as well.

  10. Manzanita Hybrid Power system Project Final Report

    SciTech Connect (OSTI)

    Trisha Frank

    2005-03-31

    The Manzanita Indian Reservation is located in southeastern San Diego County, California. The Tribe has long recognized that the Reservation has an abundant wind resource that could be commercially utilized to its benefit, and in 1995 the Tribe established the Manzanita Renewable Energy Office. Through the U.S. Department of Energy's Tribal Energy Program the Band received funds to install a hybrid renewable power system to provide electricity to one of the tribal community buildings, the Manzanita Activities Center (MAC building). The project began September 30, 1999 and was completed March 31, 2005. The system was designed and the equipment supplied by Northern Power Systems, Inc, an engineering company with expertise in renewable hybrid system design and development. Personnel of the National Renewable Energy Laboratory provided technical assistance in system design, and continued to provide technical assistance in system monitoring. The grid-connected renewable hybrid wind/photovoltaic system provides a demonstration of a solar/wind energy hybrid power-generating project on Manzanita Tribal land. During the system design phase, the National Renewable Energy Lab estimated that the wind turbine is expected to produce 10,000-kilowatt hours per year and the solar array 2,000-kilowatt hours per year. The hybrid system was designed to provide approximately 80 percent of the electricity used annually in the MAC building. The project proposed to demonstrate that this kind of a system design would provide highly reliable renewable power for community uses.

  11. Fact #875: June 1, 2015 Hybrid Electric Vehicle Penetration by State, 2014

    Broader source: Energy.gov [DOE]

    Hybrid electric vehicles (HEVs) are conventional hybrid vehicles that use a gasoline engine with a hybrid electric drive for superior efficiency; they do not plug-in. This type of hybrid vehicle...

  12. Crystallization of POSS in a PEG-Based Multiblock Polyurethane: Toward A Hybrid , Kelly A. Burke1

    E-Print Network [OSTI]

    Mather, Patrick T.

    -POSS thermoplastic polyurethane applicable to a novel hybrid hydrogel. Thus, a unique series of hybrid thermoplastic

  13. DRAFT INTERIM REPORT: NATIONAL PROGRAM PLAN FOR PASSIVE AND HYBRID SOLAR HEATING AND COOLING

    E-Print Network [OSTI]

    Authors, Various

    2012-01-01

    heat exchangers, hybrid components such as fans and pumps,for fans, pumps, and valves used in hybrid systems; heat

  14. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01

    Common Passive and Hybrid Heating Cooling Systems Michael].THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

  15. Fact #562: March 16, 2009 Carbon Reduction of Plug-in Hybrid Electric Vehicles

    Broader source: Energy.gov [DOE]

    Estimates from the GREET model (see Argonne National Laboratory's information on GREET) show that passenger car PHEV10s produce about 29% fewer carbon emissions than a conventional vehicle, when...

  16. Plug-in hybrid electric vehicle R&D plan

    SciTech Connect (OSTI)

    None, None

    2007-06-01

    FCVT, in consultation with industry and other appropriate DOE offices, developed the Draft Plug-In Hybrid Electric Vehicle R&D Plan to accelerate the development and deployment of technologies critical for plug-in hybrid vehicles.

  17. Hybrid & electric vehicle technology and its market feasibility

    E-Print Network [OSTI]

    Jeon, Sang Yeob

    2010-01-01

    In this thesis, Hybrid Electric Vehicles (HEV), Plug-In Hybrid Electric Vehicle (PHEV) and Electric Vehicle (EV) technology and their sales forecasts are discussed. First, the current limitations and the future potential ...

  18. Hybrid solar collector using nonimaging optics and photovoltaic components

    E-Print Network [OSTI]

    2015-01-01

    thermal hybrid solar technology," Applied Energy, 87(2),thermal hybrid solar technology," Applied Energy, 87(2),thermal system, solar PVT collector, nonimaging optics, GaAs, solar energy,

  19. Development and Optimization of Modular Hybrid Plasma Reactor...

    Office of Scientific and Technical Information (OSTI)

    Optimization of Modular Hybrid Plasma Reactor N A 36 MATERIALS SCIENCE INL developed a bench-scale, modular hybrid plasma system for gas-phase nanomaterials synthesis. The system...

  20. Hybrid user interfaces : design guidelines and implementation examples

    E-Print Network [OSTI]

    Ahn, Sehyun

    2006-01-01

    A hybrid user interface is a new type of computer user interface that achieves high usability by combining features of graphical user interfaces and command line interfaces. The main goal of a hybrid user interface is to ...

  1. Master's Thesis Hybrid Statistical Model Checking Technique for

    E-Print Network [OSTI]

    Master's Thesis Hybrid Statistical Model Checking Technique for Reliable Safety Critical Systems Technique for Reliable Safety Critical Systems #12;Hybrid Statistical Model Checking Technique for Reliable Safety Critical Systems Advisor : Professor Kim, Moonzoo by Kim, Youngjoo Department of Computer Science

  2. Arc Reversals in Hybrid Bayesian Networks with Deterministic Variables

    E-Print Network [OSTI]

    Cinicioglu, Esma N.; Shenoy, Prakash P.

    2009-05-01

    This article discusses arc reversals in hybrid Bayesian networks with deterministic variables. Hybrid Bayesian networks contain a mix of discrete and continuous chance variables. In a Bayesian network representation, a continuous chance variable...

  3. Influence of Mild Hybridization on Performance and emission in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Influence of Mild Hybridization on Performance and emission in a 4-Cylinder, In-Line Common Rail Diesel Engine Influence of Mild Hybridization on Performance and emission in a...

  4. Anisotropic flow in transport+hydrodynamics hybrid approaches

    E-Print Network [OSTI]

    Hannah Petersen

    2014-11-26

    This contribution to the focus issue covers anisotropic flow in hybrid approaches. The historical development of hybrid approaches and their impact on the interpretation of flow measurements is reviewed. The major ingredients of a hybrid approach and the transition criteria between transport and hydrodynamics are discussed. The results for anisotropic flow in (event-by-event) hybrid approaches are presented. Some hybrid approaches rely on hadronic transport for the late stages for the reaction (so called afterburner) and others employ transport approaches for the early non equilibrium evolution. In addition, there are 'full' hybrid calculations where a fluid evolution is dynamically embedded in a transport simulation. After demonstrating the success of hybrid approaches at high RHIC and LHC energies, existing hybrid caluclations for collective flow observables at lower beam energies are discussed and remaining challenges outlined.

  5. Fuel Economy Improvements from a Hybrid-Electric/Diesel Powertrain...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Economy Improvements from a Hybrid-ElectricDiesel Powertrain in a Class 4 Parcel Delivery Vehicle Fuel Economy Improvements from a Hybrid-ElectricDiesel Powertrain in a Class 4...

  6. A hybrid plasmonic waveguide terahertz quantum cascade laser

    E-Print Network [OSTI]

    Degl'Innocenti, Riccardo; Shah, Yash D.; Wallis, Robert; Klimont, Adam; Ren, Yuan; Jessop, David S.; Beere, Harvey E.; Ritchie, David A.

    2015-02-23

    We present the realization of a quantum cascade laser emitting at around 2.85 terahertz, based on a hybrid plasmonic waveguide with a low refractive index dielectric cladding. This hybrid waveguide design allows the performance of a double...

  7. The Public, the Private and the Hybrid: Mapping the Governance...

    Open Energy Info (EERE)

    The Public, the Private and the Hybrid: Mapping the Governance of Energy Finance Jump to: navigation, search Tool Summary LAUNCH TOOL Name: The Public, the Private and the Hybrid:...

  8. Using Hybrid MPI and OpenMP on Franklin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Using Hybrid MPIOpenMP Using Hybrid MPIOpenMP Using OpenMP Franklin has 4 cores sharing the memory on each node. OpenMP is supported within the node. To use OpenMP, a specific...

  9. Fact #762: January 14, 2013 Sales from Introduction: Hybrid Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: January 14, 2013 Sales from Introduction: Hybrid Vehicles vs. Plug-in Vehicles Fact 762: January 14, 2013 Sales from Introduction: Hybrid Vehicles vs. Plug-in Vehicles The...

  10. Benefits of battery-uItracapacitor hybrid energy storage systems

    E-Print Network [OSTI]

    Smith, Ian C., S.M. (Ian Charles). Massachusetts Institute of Technology

    2012-01-01

    This thesis explores the benefits of battery and battery-ultracapacitor hybrid energy storage systems (ESSs) in pulsed-load applications. It investigates and quantifies the benefits of the hybrid ESS over its battery-only ...

  11. Hybrid vehicle design using global optimisation Wenzhong Gao

    E-Print Network [OSTI]

    Mi, Chunting "Chris"

    electronics, hybrid electric vehicles, electric machines, and renewable energy systems. HeHybrid vehicle design using global optimisation algorithms Wenzhong Gao Department of Electrical of Electrical and Computer Engineering, University of Michigan, 4901 Evergreen Road, Dearborn, MI 48128 USA Fax

  12. Hybrid computer simulation of atomic orbitals of one electron system 

    E-Print Network [OSTI]

    Balasubramanium, Prabaker

    1998-01-01

    quantum chemical wave equation. Generating this function is the unit level operation in molecular modeling. Therefore, analyzing the performance of the hybrid computer at this level will bring out the basic differences between hybrid computing and digital...

  13. A summary of EPRI's fusion-fission hybrid evaluation activities

    SciTech Connect (OSTI)

    Amherd, N.A.

    1982-10-01

    A summary is given of recently completed and planned fusion-fission hybrid projects. Electricty supply/demand projections and estimates of future uranium requirements for several different combinations of nuclear systems, including hybrids, are discussed.

  14. A study in hybrid vehicle architectures : comparing efficiency and performance

    E-Print Network [OSTI]

    Cotter, Gavin M

    2009-01-01

    This paper presents a comparison of performance and efficiencies for four vehicle power architectures; the internal combustion engine (ICE), the parallel hybrid (i.e. Toyota Prius), the serial hybrid (i.e. Chevrolet Volt), ...

  15. Fact #598: November 23, 2009 Hybrid Vehicle Sales by Model

    Office of Energy Efficiency and Renewable Energy (EERE)

    The number of all light vehicles sold declined about 18% from 2007 to 2008, while the number of hybrid vehicles sold declined about 11%. Five new hybrid models were sold in 2008; other than those,...

  16. Hybrid quantum devices and quantum engineering

    E-Print Network [OSTI]

    Margareta Wallquist; Klemens Hammerer; Peter Rabl; Mikhail Lukin; Peter Zoller

    2009-11-19

    We discuss prospects of building hybrid quantum devices involving elements of atomic and molecular physics, quantum optics and solid state elements with the attempt to combine advantages of the respective systems in compatible experimental setups. In particular, we summarize our recent work on quantum hybrid devices and briefly discuss recent ideas for quantum networks. These include interfacing of molecular quantum memory with circuit QED, and using nanomechanical elements strongly coupled to qubits represented by electronic spins, as well as single atoms or atomic ensembles.

  17. Expansion effects on solar wind hybrid simulations

    SciTech Connect (OSTI)

    Parashar, Tulasi N.; Velli, Marco; Goldstein, Bruce E. [NASA Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

    2013-06-13

    Ion kinetic simulations of the solar wind using hybrid codes can model local wave input, heating and instabilities, but generally do not include long term evolution effects in the expanding solar wind. We further develop the expanding box model used in earlier studies to include the mirror force effects and study their role in the evolution of the proton distribution functions in the outer corona and inner heliosphere. The mirror force, significant in the acceleration region of the solar wind, is required for consistency with the conservation of magnetic moment of particles in the expanding wind. We present preliminary results from the modified 1D expanding box hybrid (EBHM) simulations.

  18. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHoursaUSHumanHuntingHybridHybrid

  19. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein Khalil Hussein Khalil Director of FindHybridHybrid

  20. Tempe Transportation Division: LNG Turbine Hybrid Electric Buses

    SciTech Connect (OSTI)

    Not Available

    2002-02-01

    Fact sheet describes the performance of liquefied natural gas (LNG) turbine hybrid electric buses used in Tempe's Transportation Division.

  1. Verifying Hybrid Systems Modeled as Timed Automata: A Case Study?

    E-Print Network [OSTI]

    -Vaandrager timed automata model, of the Steam Boiler Controller problem, a hybrid systems benchmark. This pa- per

  2. MTA New York City Transit: Diesel Hybrid Electric Buses

    SciTech Connect (OSTI)

    Not Available

    2003-03-01

    Fact sheet describes the performance of diesel hybrid electric buses used at MTA New York City Transit.

  3. System Simulations of Hybrid Electric Vehicles with Focus on Emissions

    Broader source: Energy.gov [DOE]

    Comparative simulations of hybrid electric vehicles with gasoline and diesel engines will be conducted with focus on emissions control.

  4. CRADA Final Report: Process development for hybrid solar cells

    E-Print Network [OSTI]

    Ager, Joel W

    2011-01-01

    global market. By reaching their target efficiency of 30%, the hybrid tandem solar cells have the potential

  5. ECE 438 Electric and Hybrid Vehicles Catalog Description: History of electric traction. Introduction to electric and hybrid-electric

    E-Print Network [OSTI]

    ECE 438 ­ Electric and Hybrid Vehicles Catalog Description: History of electric traction. Introduction to electric and hybrid-electric vehicle configurations. Vehicle mechanics. Energy sources and storage. Range prediction. Motor for HEVs. Electric drive components. Vehicle transmission system. Credits

  6. The global pairwise approach to radiation hybrid mapping

    E-Print Network [OSTI]

    Hastie, Trevor

    The global pairwise approach to radiation hybrid mapping Robert Tibshirani \\Lambda Laura Lazzeroni maps from radiation hybrid data is pro­ posed. It uses maximization of a pseudo­likelihood based for constructing maps from radiation hybrid data. The method depends upon a novel statistical criterion for iden

  7. Theoretical insights into multibandgap hybrid perovskites for photovoltaic applications

    E-Print Network [OSTI]

    Theoretical insights into multibandgap hybrid perovskites for photovoltaic applications J. Even theoretically the crystalline phases of one of the hybrids relevant for photovoltaic applications, namely CH3NH3, evidencing inversion of band edge states. Keywords: Photovoltaic, Hybrid perovskite, density functional

  8. Hybrid and Plug-In Electric Vehicles (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-05-01

    Hybrid and plug-in electric vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. These vehicles can be divided into three categories: hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs), all-electric vehicles (EVs). Together, they have great potential to cut U.S. petroleum use and vehicle emissions.

  9. Reinforcement Learning Based Power Management for Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Pedram, Massoud

    Reinforcement Learning Based Power Management for Hybrid Electric Vehicles Xue Lin 1 , Yanzhi Wang combustion engine (ICE) propelled vehicles, hybrid electric vehicles (HEVs) can achieve both higher fuel economy and lower pollution emissions. The HEV consists of a hybrid propulsion system containing one ICE

  10. Adaptive Cruise Control: Hybrid, Distributed, and Now Formally Verified

    E-Print Network [OSTI]

    is that faithful models of distributed car control have both distributed systems and hybrid systems dynamics dynamics. Distributed car control follows a hybrid dynamics, because cars move continuously alongAdaptive Cruise Control: Hybrid, Distributed, and Now Formally Verified Sarah M. Loos, Andr

  11. Approximate bisimulation for a class of stochastic hybrid systems

    E-Print Network [OSTI]

    Pappas, George J.

    , target tracking, robotics, and power systems [35]. The field of stochastic hybrid systems is a veryApproximate bisimulation for a class of stochastic hybrid systems (Invited Paper) Agung Julius of stochastic hybrid systems, namely, the jump linear stochastic systems (JLSS). The idea is based

  12. Hybrid Dynamical Systems, or HDS: The Ultimate Switching Experience

    E-Print Network [OSTI]

    Branicky, Michael S.

    Hybrid Dynamical Systems, or HDS: The Ultimate Switching Experience Michael S. Branicky Laboratory concentrated on formalizing the notion of a hybrid system as switching among an indexed collection of dynamical give a quick overview of the area of hybrid systems. I also briefly review the formal definition

  13. HYBRID NECESSARY PRINCIPLE MAURO GARAVELLO AND BENEDETTO PICCOLI

    E-Print Network [OSTI]

    Piccoli, Benedetto

    HYBRID NECESSARY PRINCIPLE MAURO GARAVELLO AND BENEDETTO PICCOLI Key words. Optimal control a hybrid control system and general optimal control problems for this system. We suppose that the switching strategy imposes restrictions on control sets and we provide necessary conditions for an optimal hybrid

  14. Hybrid Interfaces DOI: 10.1002/anie.201000984

    E-Print Network [OSTI]

    Bachmann, Michael

    Hybrid Interfaces DOI: 10.1002/anie.201000984 Microscopic Mechanism of Specific Peptide Adhesion Irbäck, and Wolfhard Janke In the past few years, the interest in hybrid interfaces formed by soft of hybrid systems and potential applications.[1,2] One particularly important problem is the self

  15. Hybrid coupled models of the tropical Pacific: I interannual variability

    E-Print Network [OSTI]

    Tang, Youmin

    Y. Tang Hybrid coupled models of the tropical Pacific: I interannual variability Received: 20 Two hybrid coupled models (HCMs), an intermediate complexity dynamical ocean model cou- pled to either), hybrid models (e.g., Barnett et al. 1993; Balmaseda et al. 1994,1995), and fully coupled general

  16. Hybrid Logical Analyses of the Ambient Thomas Bolander1

    E-Print Network [OSTI]

    Hansen, René Rydhof

    Hybrid Logical Analyses of the Ambient Calculus Thomas Bolander1 and Ren´e Rydhof Hansen2 1 Science, University of Copenhagen rrhansen@diku.dk Abstract. In this paper, hybrid logic is used of action sequences into account, can be formulated in a natural way. We show that hybrid logic is very well

  17. Hybrid Systems: Review and Recent Progress Panos J. Antsaklis

    E-Print Network [OSTI]

    Koutsoukos, Xenofon D.

    Hybrid Systems: Review and Recent Progress Panos J. Antsaklis Department of Electrical Engineering of this volume focuses on hybrid dynamical systems, an area of research that has developed as a result communities. This chapter provides a broad-based introduction to hybrid systems and discusses a number

  18. An Approach for Energy Efficient Execution of Hybrid Parallel Programs

    E-Print Network [OSTI]

    Teo, Yong-Meng

    An Approach for Energy Efficient Execution of Hybrid Parallel Programs Lavanya Ramapantulu system. One of the key challenges for energy efficient execution of hybrid programs is to determine time and energy efficient hardware configurations among a large system configuration space. Given a hybrid program

  19. Energy Efficient Hybrid Separation Processes Angelo Lucia* and Amit Amale

    E-Print Network [OSTI]

    Lucia, Angelo

    Energy Efficient Hybrid Separation Processes Angelo Lucia* and Amit Amale Department of Chemical distillation, adsorption/distillation, and others. In this work, the energy efficiency of hybrid separation the target extract compositions for the extractor and lead to the most energy efficient hybrid separations

  20. Plug-In Hybrid Electric Vehicle Market Introduction Study

    E-Print Network [OSTI]

    Pennycook, Steve

    Plug-In Hybrid Electric Vehicle Market Introduction Study SSuummmmaarryy ooff WWoorrkksshhoopp. #12;ORNL/TM-2008/242 Plug-in Hybrid Electric Vehicle Market Introduction Study SUMMARY OF WORKSHOP The Plug-In Hybrid Electric Vehicle (PHEV) Market Introduction Study Workshop was attended by approximately

  1. Cinematic of Hybrid Electrical Vehicle (V.H.E. CINEMATICS)

    E-Print Network [OSTI]

    Baudoin, Geneviève

    Cinematic of Hybrid Electrical Vehicle (V.H.E. CINEMATICS) Participants: Pr. Abdel Réama Pr. Arben Hybrid electrical vehicle is becoming a necessity to counter the rising price of the traditional for energy efficient hybrid electrical vehicle drive Problématique et objectifs The flux producing current

  2. Plug-In Hybrid Electric Vehicle Value Proposition Study

    E-Print Network [OSTI]

    Pennycook, Steve

    Plug-In Hybrid Electric Vehicle Value Proposition Study Phase 1, Task 3:Phase 1, Task 3: Technic Government or any agency thereof. #12;ORNL/TM-2008/068 Plug-in Hybrid Electric Vehicle Value Proposition The Plug-In Hybrid Electric Vehicle (PHEV) Value Proposition Study is a collaborative effort between

  3. Plug-In Hybrid Electric Vehicle Value Proposition Study

    E-Print Network [OSTI]

    Pennycook, Steve

    Plug-In Hybrid Electric Vehicle Value Proposition Study IInntteerriimm RReeppoorrtt:: PPhhaassee 11 Government or any agency thereof. ORNL/TM-2008/076 #12;Plug-in Hybrid Electric Vehicle Value Proposition 2009 i ACKNOWLEDGEMENTS The Plug-In Hybrid Electric Vehicle (PHEV) Value Proposition Study

  4. Modeling and Simulation of Electric and Hybrid Vehicles

    E-Print Network [OSTI]

    Mi, Chunting "Chris"

    INVITED P A P E R Modeling and Simulation of Electric and Hybrid Vehicles Tools that can model embedded software as well as components, and can automate the details of electric and hybrid vehicle design of electric and hybrid vehicles. Different modeling methods such as physics-based Resistive Companion Form

  5. Optimal Control of Switched Hybrid Systems: A Brief Survey

    E-Print Network [OSTI]

    Antsaklis, Panos

    Optimal Control of Switched Hybrid Systems: A Brief Survey Technical Report of the ISIS Group;1 Optimal Control of Switched Hybrid Systems: A Brief Survey Feng Zhu and Panos J. Antsaklis Department a few. The problem of determining optimal control laws for hybrid systems and in particular for switched

  6. Nonlinear Hybrid Dynamical Systems: Modeling, Optimal Control, and Applications

    E-Print Network [OSTI]

    Stryk, Oskar von

    Nonlinear Hybrid Dynamical Systems: Modeling, Optimal Control, and Applications Martin Buss1¨unchen, Germany Abstract. Nonlinear hybrid dynamical systems are the main focus of this paper. A modeling Introduction The recent interest in nonlinear hybrid dynamical systems has forced the merger of two very

  7. DESIGN OF AN EXPERIMENTAL FACILITY FOR HYBRID GROUND SOURCE HEAT

    E-Print Network [OSTI]

    DESIGN OF AN EXPERIMENTAL FACILITY FOR HYBRID GROUND SOURCE HEAT PUMP SYSTEMS By SHAWN ALEX HERN.1 HYBRID GROUND SOURCE HEAT PUMP SYSTEM DESIGN........................................2-3 2.1.1 Design...............................................................................2-5 2.2 HYBRID GROUND SOURCE HEAT PUMP SYSTEM SIMULATION................................2-9 3

  8. APPLICATIONS OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS TO

    E-Print Network [OSTI]

    APPLICATIONS OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS TO BUILDINGS AND BRIDGE DECKS. By MAHADEVAN Chapter Page 1. Introduction 1.1. Overview of hybrid ground source heat pump systems 1.2. Literature review 1.3. Thesis objective and scope 2. Optimal sizing of hybrid ground source heat pump system

  9. Energy Effective 3D Stacked Hybrid NEMFET-CMOS Caches

    E-Print Network [OSTI]

    Cotofana, Sorin

    Energy Effective 3D Stacked Hybrid NEMFET-CMOS Caches Mihai Lefter, Marius Enachescu, George Razvan-stacked hybrid memories as alternative to traditional CMOS SRAMs in L1 and L2 cache implementations and analyse-per-Cycle (IPC) and energy consumption. The 3D hybrid memory cell relies on: (i) a Short Circuit Current Free

  10. Nonlinear evolution of lower hybrid waves Charles F. F. Karney

    E-Print Network [OSTI]

    Karney, Charles

    problem. With typical fields for lower hybrid heating of a tokamak, it is found that large reflections can occur close to the edge of the plasma. I. INTRODUCTION In typical lower hybrid heating schemes, lower hy, and determine the consequences of our results for lower hybrid heating. The plan of this paper i s a s follows

  11. Static Analysis of Sandwich Plates by Hybrid Finite Elements

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Static Analysis of Sandwich Plates by Hybrid Finite Elements V. Manet and W.-S. Han Materials analysis tool. The subject of the present work concerns the development of hybrid sandwich finite elements into acount. The present work concerns the development of hybrid sandwich finite elements mod- elling

  12. Hybrid Renewable Energy Systems for a Dynamically Positioned Buoy

    E-Print Network [OSTI]

    Wood, Stephen L.

    i Hybrid Renewable Energy Systems for a Dynamically Positioned Buoy by Robert Sean Pagliari ________________________ #12; ii We the undersigned committee hereby approve the attached thesis Hybrid Renewable Energy, College of Engineering #12; iii Abstract Hybrid Renewable Energy Systems for a Dynamically Positioned

  13. Applied Formal Methods -From CSP to Executable Hybrid Specifications

    E-Print Network [OSTI]

    Peleska, Jan - Fachbereich 3

    research about Hybrid Statecharts Test Automation for Hybrid Systems motivates research about Hybrid Low Integrated Modular Avioncis (A380) (Verified Systems 2002...) Development of Railway Control Systems from VERIFIED SYSTEMS INTERNATIONAL GMBH #12;Specification-Based Hard Real-Time Testing Building blocks

  14. Battery control system for hybrid vehicle and method for controlling a hybrid vehicle battery

    DOE Patents [OSTI]

    Bockelmann, Thomas R. (Battle Creek, MI); Hope, Mark E. (Marshall, MI); Zou, Zhanjiang (Battle Creek, MI); Kang, Xiaosong (Battle Creek, MI)

    2009-02-10

    A battery control system for hybrid vehicle includes a hybrid powertrain battery, a vehicle accessory battery, and a prime mover driven generator adapted to charge the vehicle accessory battery. A detecting arrangement is configured to monitor the vehicle accessory battery's state of charge. A controller is configured to activate the prime mover to drive the generator and recharge the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a first predetermined level, or transfer electrical power from the hybrid powertrain battery to the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a second predetermined level. The invention further includes a method for controlling a hybrid vehicle powertrain system.

  15. INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1998 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1998.

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1998 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1998. Companies participating in the 1998 Corn Hybrid Trials 2 1998 Virginia Corn Hybird Plot, and 1998. 36 SECTION II. EVALUATION OF DOUBLECROP CORN UNDER IRRIGATION IN EASTERN VIRGINIA. Table 27

  16. DIG In Situ Hybridization Protocol (with detergent)

    E-Print Network [OSTI]

    at 65o C for 1 hour. You can reuse hybridization solution for 1-2 months if you store it at -20o C for 5 minutes. Chill on ice. Pipet carefully onto #12;tissue and coverslip with Hybrislip plastic cover, 0.1% Triton X-100 *Block 1 hour in B2 GOAT in vertical slide mailers. You can reuse blocking

  17. $?$ Meson Decays of Heavy Hybrid Mesons

    E-Print Network [OSTI]

    Liang Zhang; Peng-Zhi Huang

    2015-05-04

    We calculate the $\\rho$ meson couplings between heavy hybrid doublets H^h/S^h/M^h/T^h and the ordinary q\\bar{Q} doublets in the framework of light-cone QCD sum rule. The sum rules obtained rely mildly on the Borel parameters in their working regions. The resulting coupling constants are rather small in most cases.

  18. Hybrid Molten Salt Reactor (HMSR) System Study

    SciTech Connect (OSTI)

    Woolley, Robert D; Miller, Laurence F

    2014-04-01

    Can the hybrid system combination of (1) a critical fission Molten Salt Reactor (MSR) having a thermal spectrum and a high Conversion Ratio (CR) with (2) an external source of high energy neutrons provide an attractive solution to the world's expanding demand for energy? The present study indicates the answer is an emphatic yes.

  19. Hybrid anode for semiconductor radiation detectors

    DOE Patents [OSTI]

    Yang, Ge; Bolotnikov, Aleksey E; Camarda, Guiseppe; Cui, Yonggang; Hossain, Anwar; Kim, Ki Hyun; James, Ralph B

    2013-11-19

    The present invention relates to a novel hybrid anode configuration for a radiation detector that effectively reduces the edge effect of surface defects on the internal electric field in compound semiconductor detectors by focusing the internal electric field of the detector and redirecting drifting carriers away from the side surfaces of the semiconductor toward the collection electrode(s).

  20. Formal Verification of Hybrid Systems Rajeev Alur

    E-Print Network [OSTI]

    Alur, Rajeev

    , of the system un- der design, and performs extensive analysis with respect to correctness requirements-1-4503-0714-7/11/10 ...$5.00. mathematical model for design of embedded control systems is hybrid systems that combines for dynamical systems. Such models can capture both the controller -- the system under design, and the plant

  1. Probing Compositional Variation within Hybrid Nanostructures

    SciTech Connect (OSTI)

    Yuhas, Benjamin D.; Habas, Susan E.; Fakra, Sirine C.; Mokari, Taleb

    2010-06-22

    We present a detailed analysis of the structural and magnetic properties of solution-grown PtCo-CdS hybrid structures in comparison to similar free-standing PtCo alloy nanoparticles. X-ray absorption spectroscopy is utilized as a sensitive probe for identifying subtle differences in the structure of the hybrid materials. We found that the growth of bimetallic tips on a CdS nanorod substrate leads to a more complex nanoparticle structure composed of a PtCo alloy core and thin CoO shell. The core-shell architecture is an unexpected consequence of the different nanoparticle growth mechanism on the nanorod tip, as compared to free growth in solution. Magnetic measurements indicate that the PtCo-CdS hybrid structures are superparamagnetic despite the presence of a CoO shell. The use of X-ray spectroscopic techniques to detect minute differences in atomic structure and bonding in complex nanosystems makes it possible to better understand and predict catalytic or magnetic properties for nanoscale bimetallic hybrid materials.

  2. A Hybrid Approach to Conjunctive Partial Deduction

    E-Print Network [OSTI]

    Vidal, Germán

    online approach where all termination decisions are taken on-the-fly. In contrast, offline partialA Hybrid Approach to Conjunctive Partial Deduction Germ´an Vidal MiST, DSIC, Universidad Polit´ecnica de Valencia, Spain gvidal@dsic.upv.es Abstract. Conjunctive partial deduction is a well

  3. Hybrid switch for resonant power converters

    DOE Patents [OSTI]

    Lai, Jih-Sheng; Yu, Wensong

    2014-09-09

    A hybrid switch comprising two semiconductor switches connected in parallel but having different voltage drop characteristics as a function of current facilitates attainment of zero voltage switching and reduces conduction losses to complement reduction of switching losses achieved through zero voltage switching in power converters such as high-current inverters.

  4. Hybrid Heat Pump Design and Application 

    E-Print Network [OSTI]

    Wagner, J. R.; Koebberman, W. F.

    1985-01-01

    The Hybrid Heat Pump (HHP) converts industrial waste heat into process steam. Waste heat at temperatures as low as approximately 200°F can be used. Steam output covers a range between 12,000 Ib/h and 50,000 Ib/h, depending on the application...

  5. Glueballs, Hybrids and the Standard Model

    E-Print Network [OSTI]

    Bonn, Universität

    Glueballs, Hybrids and the Standard Model: Hadron '97 Summary (Experiment) Eberhard Klempt views. 1 Introduction The role of gluons in hadron spectroscopy is the continuing theme of the HADRON news on the possibilty that the frontiers of the Standard Model may have been reached or surpassed

  6. Ultralight Solar Powered Hybrid Research Drone

    E-Print Network [OSTI]

    Singer, Csaba

    2013-01-01

    A planetary research drone is proposed, which is capable for vertical takeoff and landing. A hybrid flight concept utilizing static lift enables the exploration over ground. The static lift is achieved with a lighter than CO2 gas like air, He or H2.

  7. Quantifying the Effects of Idle-Stop Systems on Fuel Economy in Light-Duty Passenger Vehicles

    SciTech Connect (OSTI)

    Jeff Wishart; Matthew Shirk

    2012-12-01

    Vehicles equipped with idle-stop (IS) systems are capable of engine shut down when the vehicle is stopped and rapid engine re-start for the vehicle launch. This capability reduces fuel consumption and emissions during periods when the engine is not being utilized to provide propulsion or to power accessories. IS systems are a low-cost and fast-growing technology in the industry-wide pursuit of increased vehicle efficiency, possibly becoming standard features in European vehicles in the near future. In contrast, currently there are only three non-hybrid vehicle models for sale in North America with IS systems and these models are distinctly low-volume models. As part of the United States Department of Energy’s Advanced Vehicle Testing Activity, ECOtality North America has tested the real-world effect of IS systems on fuel consumption in three vehicle models imported from Europe. These vehicles were chosen to represent three types of systems: (1) spark ignition with 12-V belt alternator starter; (2) compression ignition with 12-V belt alternator starter; and (3) direct-injection spark ignition, with 12-V belt alternator starter/combustion restart. The vehicles have undergone both dynamometer and on-road testing; the test results show somewhat conflicting data. The laboratory data and the portion of the on-road data in which driving is conducted on a prescribed route with trained drivers produced significant fuel economy improvement. However, the fleet data do not corroborate improvement, even though the data show significant engine-off time. It is possible that the effects of the varying driving styles and routes in the fleet testing overshadowed the fuel economy improvements. More testing with the same driver over routes that are similar with the IS system-enabled and disabled is recommended. There is anecdotal evidence that current Environmental Protection Agency fuel economy test procedures do not capture the fuel economy gains that IS systems produce in real-world driving. The program test results provide information on the veracity of these claims.

  8. High performance hybrid magnetic structure for biotechnology applications

    DOE Patents [OSTI]

    Humphries, David E.; Pollard, Martin J.; Elkin, Christopher J.

    2006-12-12

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides for separation and other biotechnology applications involving holding, manipulation, or separation of magnetic or magnetizable molecular structures and targets. Also disclosed are: a method of assembling the hybrid magnetic plates, a high throughput protocol featuring the hybrid magnetic structure, and other embodiments of the ferromagnetic pole shape, attachment and adapter interfaces for adapting the use of the hybrid magnetic structure for use with liquid handling and other robots for use in high throughput processes.

  9. High performance hybrid magnetic structure for biotechnology applications

    DOE Patents [OSTI]

    Humphries, David E; Pollard, Martin J; Elkin, Christopher J

    2005-10-11

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetizable molecular structures and targets. Also disclosed are: a method of assembling the hybrid magnetic plates, a high throughput protocol featuring the hybrid magnetic structure, and other embodiments of the ferromagnetic pole shape, attachment and adapter interfaces for adapting the use of the hybrid magnetic structure for use with liquid handling and other robots for use in high throughput processes.

  10. Hybrid meson decay from lattice QCD

    E-Print Network [OSTI]

    Ziwen Fu

    2012-09-10

    Besides the conventional hadrons containing valence quarks and valence antiquarks, quantum chromodynamics (QCD) suggests the existence of the hybrid hadrons containing valence gluons in addition to the quarks and antiquarks, and some experiments may have found some. A decisive experimental confirmation of its existence, however, is still needed. At present, lattice simulations have offered the practicable ways of theoretically guiding us to search for the hybrid states. In this dissertation, we study the spectroscopy and the decay rate of the heavy hybrid mesons made of a heavy $b$ quark, a heavy $\\bar b$ antiquark, and a gluon ($b\\bar{b}g$) to selected channels, and use lattice methods to extract the transition matrix elements in full QCD. We are particular interested in the spin-exotic hybrid mesons. For sufficiently heavy quarks (e.g., $b$ quark), we use the leading Born-Oppenheimer (LBO) approximation to calculate the static potential energy at all $b\\bar{b}$ separations. Then, by solving the Schr\\"odinger equation with this potential, we reconstruct the motion of the heavy quarks. In a similar way we can determine decay rates. In this dissertation, we use the numerical lattice method to calculate the mass of the $f_0$ meson at a single lattice spacing and light quark mass, namely, $m_{f_0} = (768 \\pm 136)$ MeV. Most of all we consider the decay channels involving the production of a scalar meson. We obtain the partial decay rate ($\\Gamma$) for the channel $ H \\rightarrow \\chi_b + \\pi + \\pi $, namely, $ \\Gamma = 3.62(98)$ MeV. All of our results are consistent with those of other researchers. Knowledge of the masses and the decay rates should help us considerably in experimental searches for the hybrid mesons.

  11. Societal lifetime cost of hydrogen fuel cell vehicles

    E-Print Network [OSTI]

    Sun, Yongling; Ogden, J; Delucchi, Mark

    2010-01-01

    analysis shows that hybrid and electric cars perform bettercar (4-5 passengers) Fuels Gasoline, CNG, diesel, FT50, methanol, H2 Powertrains ICE, hybrid,

  12. Fact #849: December 1, 2014 Midsize Hybrid Cars Averaged 51% Better Fuel Economy than Midsize Non-Hybrid Cars in 2014- Dataset

    Broader source: Energy.gov [DOE]

    Excel file with dataset for Fact #849: December 1, 2014 Midsize Hybrid Cars Averaged 51% Better Fuel Economy than Midsize Non-Hybrid Cars in 2014

  13. Fuelcell-Hybrid Mine loader (LHD)

    SciTech Connect (OSTI)

    James L Dippo; Tim Erikson; Kris Hess

    2009-07-10

    The fuel cell hybrid mine loader project, sponsored by a government-industry consortium, was implemented to determine the viability of proton exchange membrane (PEM) fuel cells in underground mining applications. The Department of Energy (DOE) sponsored this project with cost-share support from industry. The project had three main goals: (1) to develop a mine loader powered by a fuel cell, (2) to develop associated metal-hydride storage and refueling systems, and (3) to demonstrate the fuel cell hybrid loader in an underground mine in Nevada. The investigation of a zero-emissions fuel cell power plant, the safe storage of hydrogen, worker health advantages (over the negative health effects associated with exposure to diesel emissions), and lower operating costs are all key objectives for this project.

  14. Hybrid least squares multivariate spectral analysis methods

    DOE Patents [OSTI]

    Haaland, David M.

    2004-03-23

    A set of hybrid least squares multivariate spectral analysis methods in which spectral shapes of components or effects not present in the original calibration step are added in a following prediction or calibration step to improve the accuracy of the estimation of the amount of the original components in the sampled mixture. The hybrid method herein means a combination of an initial calibration step with subsequent analysis by an inverse multivariate analysis method. A spectral shape herein means normally the spectral shape of a non-calibrated chemical component in the sample mixture but can also mean the spectral shapes of other sources of spectral variation, including temperature drift, shifts between spectrometers, spectrometer drift, etc. The shape can be continuous, discontinuous, or even discrete points illustrative of the particular effect.

  15. Hybrid anodes for redox flow batteries

    DOE Patents [OSTI]

    Wang, Wei; Xiao, Jie; Wei, Xiaoliang; Liu, Jun; Sprenkle, Vincent L.

    2015-12-15

    RFBs having solid hybrid electrodes can address at least the problems of active material consumption, electrode passivation, and metal electrode dendrite growth that can be characteristic of traditional batteries, especially those operating at high current densities. The RFBs each have a first half cell containing a first redox couple dissolved in a solution or contained in a suspension. The solution or suspension can flow from a reservoir to the first half cell. A second half cell contains the solid hybrid electrode, which has a first electrode connected to a second electrode, thereby resulting in an equipotential between the first and second electrodes. The first and second half cells are separated by a separator or membrane.

  16. Hybrid anodes for redox flow batteries

    DOE Patents [OSTI]

    Wang, Wei; Xiao, Jie; Wei, Xiaoliang; Liu, Jun; Sprenkle, Vincent L.

    2015-12-22

    RFBs having solid hybrid electrodes can address at least the problems of active material consumption, electrode passivation, and metal electrode dendrite growth that can be characteristic of traditional batteries, especially those operating at high current densities. The RFBs each have a first half cell containing a first redox couple dissolved in a solution or contained in a suspension. The solution or suspension can flow from a reservoir to the first half cell. A second half cell contains the solid hybrid electrode, which has a first electrode connected to a second electrode, thereby resulting in an equipotential between the first and second electrodes. The first and second half cells are separated by a separator or membrane.

  17. Hybrid Energy System Modeling in Modelica

    SciTech Connect (OSTI)

    William R. Binder; Christiaan J. J. Paredis; Humberto E. Garcia

    2014-03-01

    In this paper, a Hybrid Energy System (HES) configuration is modeled in Modelica. Hybrid Energy Systems (HES) have as their defining characteristic the use of one or more energy inputs, combined with the potential for multiple energy outputs. Compared to traditional energy systems, HES provide additional operational flexibility so that high variability in both energy production and consumption levels can be absorbed more effectively. This is particularly important when including renewable energy sources, whose output levels are inherently variable, determined by nature. The specific HES configuration modeled in this paper include two energy inputs: a nuclear plant, and a series of wind turbines. In addition, the system produces two energy outputs: electricity and synthetic fuel. The models are verified through simulations of the individual components, and the system as a whole. The simulations are performed for a range of component sizes, operating conditions, and control schemes.

  18. Hybrid least squares multivariate spectral analysis methods

    DOE Patents [OSTI]

    Haaland, David M. (Albuquerque, NM)

    2002-01-01

    A set of hybrid least squares multivariate spectral analysis methods in which spectral shapes of components or effects not present in the original calibration step are added in a following estimation or calibration step to improve the accuracy of the estimation of the amount of the original components in the sampled mixture. The "hybrid" method herein means a combination of an initial classical least squares analysis calibration step with subsequent analysis by an inverse multivariate analysis method. A "spectral shape" herein means normally the spectral shape of a non-calibrated chemical component in the sample mixture but can also mean the spectral shapes of other sources of spectral variation, including temperature drift, shifts between spectrometers, spectrometer drift, etc. The "shape" can be continuous, discontinuous, or even discrete points illustrative of the particular effect.

  19. Hybrid Lithium Niobate and Silicon Photonic Waveguides

    E-Print Network [OSTI]

    Weigel, Peter O; DeRose, Christopher; Pomerene, Andrew T; Starbuck, Andrew L; Lentine, Anthony L; Stenger, Vincent; Mookherjea, Shayan

    2015-01-01

    We describe a hybrid lithium niobate (LN) / silicon (Si) optical waveguiding platform at near infrared wavelengths. Various optical circuit elements, such as waveguides, bends, and couplers are demonstrated in two hybrid cross sections, A and B, with different LN confinement factors (32% and 90%, respectively) of the fundamental quasi TE mode. Such a large LN confinement factor is achieved with adiabatic tapers that preserve the symmetry of the fundamental quasi TE mode and prevent mode rotation. We find the average propagation loss in cross section B to be 4.3 dB/cm with a standard deviation of 2.1 dB/cm, comparable with a 3 um SiO2 clad (in place of LN) Si waveguide whose average propagation loss was 3.1 dB/cm with a standard deviation of 2.1 dB/cm.

  20. System for controlling a hybrid energy system

    DOE Patents [OSTI]

    Hoff, Brian D.; Akasam, Sivaprasad

    2013-01-29

    A method includes identifying a first operating sequence of a repeated operation of at least one non-traction load. The method also includes determining first and second parameters respectively indicative of a requested energy and output energy of the at least one non-traction load and comparing the determined first and second parameters at a plurality of time increments of the first operating sequence. The method also includes determining a third parameter of the hybrid energy system indicative of energy regenerated from the at least one non-traction load and monitoring the third parameter at the plurality of time increments of the first operating sequence. The method also includes determining at least one of an energy deficiency or an energy surplus associated with the non-traction load of the hybrid energy system and selectively adjusting energy stored within the storage device during at least a portion of a second operating sequence.

  1. New hybrid polysilane/polysiloxane nanocomposites

    SciTech Connect (OSTI)

    Jamison, G.M.; Loy, D.A. [Sandia National Labs., Albuquerque, NM (United States); [Stanford Univ., CA (United States); Opperman, K.A.; Beach, J.V. [Sandia National Labs., Albuquerque, NM (United States)

    1996-12-31

    (Alkoxysilyl)propyl-functionalized polysilanes 2a-c are generated by the free radical-initiated hydrosilation of allylsilanes 1a-c with polyphenylsilane. The latent sol-gel alkoxysilane residues undergo hydrolysis-poly-condensation under acid-catalyzed conditions to form new hybrid organic-inorganic nanocomposites 3a-c, which can be processed as xerogels or aerogels. Spectral and bulk characterization of the new materials will be discussed.

  2. Microgravity-Hybrid Microgravity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenariosMarysvilleMicrogravity-Hybrid Microgravity Jump to: navigation,

  3. Hybrid Electric Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls - BuildingofDepartmentHybird Geothemal-SolarHybrid

  4. Masses of Flavor Singlet Hybrid Baryons

    E-Print Network [OSTI]

    Olaf Kittel; Glennys R. Farrar

    2000-10-17

    We study the possibility that four iso-singlet baryons $\\Lambda_s(1405)$ $J^P=1/2^{-}$, $\\Lambda_s(1520)$ $J^P=3/2^{-}$, $\\Lambda_c(2593)$ $J^P=1/2^{-}$ and $\\Lambda_c(2625)$ $J^P=3/2^{-}$ are hybrids: three quark one gluon states (udsg). We calculate the mass separations of the candidates, using a degeneracy-lifting hyperfine interaction from an effective single colored gluon exchange between the constituents. The correct ordering of masses is obtained (contrary to the case for the conventional interpretation as 3 quarks with L=1) and the splittings are plausible. The parity of these states is not measured, only assumed to be negative. In the hybrid picture, the lightest states are parity even and the parity odd counterparts lie about 300 MeV higher. Thus the hybrid ansatz predicts that either the parity of the $\\Lambda(1405)$ etc is positive, or that there are undiscovered positive parity states about 300 MeV lower. We also remark that in this picture, the H-dibaryon mass may be around 1.5 GeV.

  5. Secure Data Processing in a Hybrid Cloud

    E-Print Network [OSTI]

    Khadilkar, Vaibhav; Thuraisingham, Bhavani; Mehrotra, Sharad

    2011-01-01

    Cloud computing has made it possible for a user to be able to select a computing service precisely when needed. However, certain factors such as security of data and regulatory issues will impact a user's choice of using such a service. A solution to these problems is the use of a hybrid cloud that combines a user's local computing capabilities (for mission- or organization-critical tasks) with a public cloud (for less influential tasks). We foresee three challenges that must be overcome before the adoption of a hybrid cloud approach: 1) data design: How to partition relations in a hybrid cloud? The solution to this problem must account for the sensitivity of attributes in a relation as well as the workload of a user; 2) data security: How to protect a user's data in a public cloud with encryption while enabling query processing over this encrypted data? and 3) query processing: How to execute queries efficiently over both, encrypted and unencrypted data? This paper addresses these challenges and incorporates...

  6. Hybrid Estimation of CMB Polarization Power Spectra

    E-Print Network [OSTI]

    G. Efstathiou

    2006-01-05

    This paper generalises the hybrid power spectrum estimator developed in Efstathiou (2004a) to the estimation of polarization power spectra of the cosmic microwave background radiation. The hybrid power spectrum estimator is unbiased and we show that it is close to optimal at all multipoles, provided the pixel noise satisfies certain reasonable constraints. Furthermore, the hybrid estimator is computationally fast and can easily be incorporated in a Monte-Carlo chain for Planck-sized data sets. Simple formulae are given for the covariance matrices, including instrumental noise, and these are tested extensively against numerical simulations. We compare the behaviour of simple pseudo-Cell estimates with maximum likelihood estimates at low multipoles. For realistic sky cuts, maximum likelihood estimates reduce very significantly the mixing of E and B modes. To achieve limits on the scalar-tensor ratio of r<<0.1 from sky maps with realistic sky cuts, maximum likelihood methods, or pseudo-Cell estimators based on unambiguous E and B modes, will be essential.

  7. Close Look at Hybrid Vehicle Loyalty and Ownership

    SciTech Connect (OSTI)

    Hwang, Ho-Ling; Chin, Shih-Miao; Wilson, Daniel W; Oliveira Neto, Francisco Moraes; Taylor, Rob D

    2013-01-01

    In a news release dated April 9, 2012, Polk stated that only 35% of hybrid owners bought a hybrid again when they returned to market in 2011. These findings were based on an internal study conducted by Polk. The study also indicated that if repurchase behavior among the high volume audience of Toyota Prius owners wasn t factored in; hybrid loyalty would drop to under 25%. This news release has generated a lot of interest and concern by the automobile industry as well as consumers, since it was published, and caused many to think about the idea of hybrid loyalty as well as factors that influence consumers. Most reactions to the 35% hybrid loyalty dealt with concerns of the viability of hybrid technology as part of the solution to address transportation energy challenges. This paper attempts to shed more light on Polk s hybrid loyalty study as well as explore several information sources concerning hybrid loyalty status. Specifically, major factors that might impact the selection and acquisition of hybrid vehicles are addressed. This includes investigating the associations between hybrid market shares and influencing factors like fuel price and hybrid incentives, as well as the availability of hybrid models and other highly fuel efficient vehicle options. This effort is not in-depth study, but rather a short study to see if Polk s claim could be validated. This study reveals that Polk s claim was rather misleading because its definition of loyalty was very narrow. This paper also suggests that Polk s analysis failed to account for some very important factors, raising the question of whether it is fair to compare a vehicle drive train option (which hybrids are) with a vehicle brand in terms of loyalty and also raises the question of whether hybrid loyalty is even a valid point to consider. This report maintains that Polk s study does not prove that hybrid owners were dissatisfied with their vehicles, which was a common theme among reporting news agencies when Polk initially released their findings. In this brief review, the team has looked at factors that might contribute to a consumer choosing to not purchase a hybrid; including the increase in manufacture s overall vehicle mpg and the percentage of the vehicle market owned by hybrids.

  8. Hybrid meson masses and the correlated Gaussian basis

    E-Print Network [OSTI]

    Vincent Mathieu

    2009-07-06

    We revisited a model for charmonium hybrid meson with a magnetic gluon [Yu. S. Kalashnikova and A. V. Nefediev, Phys. Rev. D {\\bf 77}, 054025 (2008)] and improved the numerical calculations. These improvements support the hybrid meson interpretation of X(4260). Within the same model, we computed the hybrid meson mass with an electric gluon which is resolved to be lighter. Relativistic effects and coupling channels decreased also the mass.

  9. Hybrid quantum-classical models as constrained quantum systems

    E-Print Network [OSTI]

    M. Radonjic; S. Prvanovic; N. Buric

    2012-06-07

    Constrained Hamiltonian description of the classical limit is utilized in order to derive consistent dynamical equations for hybrid quantum-classical systems. Starting with a compound quantum system in the Hamiltonian formulation conditions for classical behavior are imposed on one of its subsystems and the corresponding hybrid dynamical equations are derived. The presented formalism suggests that the hybrid systems have properties that are not exhausted by those of quantum and classical systems.

  10. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    etc. , PEM Fuel Cell System Optimization, Proceedings of thesystem, hybrid fuel cell vehicle, optimization, dynamic,a scalable fuel cell system optimization model [14

  11. Case Study: Ebus Hybrid Electric Buses and Trolleys

    SciTech Connect (OSTI)

    Barnitt, R.

    2006-07-01

    Evaluation focuses on the demonstration of hybrid electric buses and trolleys produced by Ebus Inc. at the Indianapolis Transportation Corporation and the Knoxville Area Transit.

  12. Marine Hybrid Propulsion Market Revenue is anticipated to Reach...

    Open Energy Info (EERE)

    ferry operators are the major adopters of marine hybrid propulsion systems across the world. These vessels primarily operate in coastal areas and inland waterways, where emission...

  13. Magnetic pinning of flux lattice in superconducting-nanomagnet hybrids

    E-Print Network [OSTI]

    2011-01-01

    of flux lattice in superconducting-nanomagnet hybrids D.This plays a key role in superconductor properties such as ?ingre- dients in superconductor based applications. The

  14. Recent advances in picosecond and hybrid femtosecond/picosecond...

    Office of Scientific and Technical Information (OSTI)

    Recent advances in picosecond and hybrid femtosecondpicosecond CARS techniques for gas phase analysis. Citation Details In-Document Search Title: Recent advances in picosecond and...

  15. Hybrid solar collector using nonimaging optics and photovoltaic components

    E-Print Network [OSTI]

    2015-01-01

    Evaluation of On-Board Photovoltaic Modules Options forthe Temperature Dependence of Photovoltaic Module ElectricalChow, T. T. , "A review on photovoltaic/thermal hybrid solar

  16. Oligo and Poly-thiophene/Zno Hybrid Nanowire Solar Cells

    E-Print Network [OSTI]

    Briseno, Alejandro L.

    2010-01-01

    ZnO Hybrid Nanowire Solar Cells Alejandro L. Briseno, Thomashybrid single nanowire solar cell. End-functionalized oligo-Individual nanowire solar cell devices exhibited well-

  17. Vehicle Technologies Office - AVTA: Hybrid-Electric Tractor Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tractor Vehicles Vehicle Technologies Office - AVTA: Hybrid-Electric Tractor Vehicles The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a...

  18. Hybrid supramolecular and colloidal hydrogels bridging multiple length scales

    E-Print Network [OSTI]

    Jane?ek, Emma-Rose; McKee, Jason R.; Tan, Cindy S. Y.; Nykänen, Antti; Kettunen, Marjo; Laine, Janne; Ikkala, Olli; Scherman, Oren A.

    2015-03-13

    Hybrid nanocomposites were constructed based on colloidal nanofibrillar hydrogels with interpenetrating supramolecular hydrogels, displaying enhanced rheological yield strain and a synergistic improvement in storage modulus. The supramolecular...

  19. High performance hybrid magnetic structure for biotechnology applications

    DOE Patents [OSTI]

    Humphries, David E. (El Cerrito, CA); Pollard, Martin J. (El Cerrito, CA); Elkin, Christopher J. (San Ramon, CA)

    2009-02-03

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetic or magnetizable molecular structures and targets. Also disclosed are further improvements to aspects of the hybrid magnetic structure, including additional elements and for adapting the use of the hybrid magnetic structure for use in biotechnology and high throughput processes.

  20. Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington D.C. vssarravt068miyasato2010p.pdf More Documents & Publications Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration and Evaluation Vehicle...

  1. Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation arravt068vssmiyasato2011o .pdf More Documents & Publications Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration and Evaluation SCAQMD:Plug-In...

  2. AVTA: Idaho National Laboratory Experimental Hybrid Shuttle Bus Testing Results

    Broader source: Energy.gov [DOE]

    The following report describes testing results of the Idaho National Laboratory's demonstration hybrid shuttle bus. This research was conducted by Idaho National Laboratory.

  3. Modular hybrid plasma reactor and related systems and methods...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Patent Search Success Stories News Events Find More Like This Return to Search Modular hybrid plasma reactor and related systems and methods United States Patent Patent Number:...

  4. Modular hybrid plasma reactor and related systems and methods...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (27) Visual Patent Search Success Stories News Events Return to Search Modular hybrid plasma reactor and related systems and methods United States Patent Application ***...

  5. 2011 Annual Merit Review Results Report - Hybrid and Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    01.pdf More Documents & Publications 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies 2012 Annual Merit Review Results Report - Introduction 2012...

  6. Vehicle Technologies Office - AVTA: Hybrid-Electric Delivery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Delivery Vehicles Vehicle Technologies Office - AVTA: Hybrid-Electric Delivery Vehicles The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a...

  7. Hybrid Air-Cooled Condenser - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hybrid Air-Cooled Condenser National Renewable Energy Laboratory Contact NREL About This Technology Technology Marketing Summary Geothermal energy has been a viable energy source...

  8. Ultracapacitor Applications and Evaluation for Hybrid Electric Vehicles (Presentation)

    SciTech Connect (OSTI)

    Pesaran, A.; Gonder, J.; Keyser, M.

    2009-04-01

    Describes the use of ultracapacitors in advanced hybrid and electric vehicles and discusses thermal and electrical testing of lithium ion capacitors for HEV applications.

  9. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    Moderate Hybrid-electric Vehicles. ESScap06, Switzerland,GH. SIMPLEV: A Simple Electric Vehicle Simulation Program-20 th International Electric Vehicle Symposium, Long Beach,

  10. Opportunities for Micropower and Fuel Cell/Gas Turbine Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I, January 2000 Opportunities for Micropower and Fuel CellGas Turbine Hybrid Systems in Industrial Applications - Volume I, January 2000 In this January 2000 report, Arthur D....

  11. The ArvinMeritor Dual Mode Hybrid Powertrain (DMHP): Opportunities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ArvinMeritor Dual Mode Hybrid Powertrain (DMHP): Opportunities and Potential for Systems Optimization 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program...

  12. Documentation of Hybrid Hydride Model for Incorporation into...

    Energy Savers [EERE]

    does not currently solve the stress state that forms dynamically in the precipitate or matrix surrounding the precipitate. A path forward is presented. DocHybridHydrid...

  13. Development of Design and Simulation Tool for Hybrid Geothermal...

    Open Energy Info (EERE)

    Development of Design and Simulation Tool for Hybrid Geothermal Heat Pump System Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title...

  14. CRADA Final Report: Process development for hybrid solar cells

    E-Print Network [OSTI]

    Ager, Joel W

    2011-01-01

    the U.S. economy. The solar cell’s target market is the highmarket. By reaching their target efficiency of 30%, the hybrid tandem solar

  15. Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid Buses

    Broader source: Energy.gov [DOE]

    Emissions and fuel economy data were studied from tests on four diesel and diesel hybrid transit buses using the Houston Metro Bus Cycle.

  16. CTTRANSIT Operates New England's First Fuel Cell Hybrid Bus ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Bus DOE Hydrogen Program (Fact Sheet) 42407.pdf More Documents & Publications Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Third Evaluation Report and Appendices...

  17. Los Alamos explores hybrid ultrasmall gold nanocluster for enzymatic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alamos explores hybrid ultrasmall gold nanocluster for enzymatic fuel cells With fossil-fuel sources dwindling, better biofuel cell design is a strong candidate in the energy...

  18. Hybrid method for aerodynamic shape optimization in automotive industry

    E-Print Network [OSTI]

    Dumas, Laurent

    Hybrid method for aerodynamic shape optimization in automotive industry Freedeerique Muyl precisely the reduction of their drag coefficient, becomes one of the main topics of the automotive research

  19. Development and Characterization of Texas Bluegrass x Kentucky Bluegrass Interspecific Hybrids for the Southern United States 

    E-Print Network [OSTI]

    Meeks, Meghyn

    2015-05-08

    of this research were to 1) develop new interspecific hybrid bluegrasses and optimize a seed germination technique, 2) use flow cytometry and molecular markers for the characterization of hybrid progeny, and 3) evaluate the growth response and performance of hybrid...

  20. Aalborg Universitet Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic-Battery-

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic). Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic-Battery-Hydropower Microgrids, pp. 1573-1580. Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic

  1. Symbolism in California’s Early Market for Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Heffner, Reid R.; Kurani, Kenneth S; Turrentine, Tom

    2008-01-01

    2006. The Dollars and Sense of Hybrid Cars. AvailableSurvey of Oregon Hybrid Gas-Electric Car Owners. Portland.cars/new-cars/ high-cost-of-hybrid-vehicles-406/overview.htm

  2. Semiotics and Advanced Vehicles: What Hybrid Electric Vehicles (HEVs) Mean and Why it Matters to Consumers

    E-Print Network [OSTI]

    Heffner, Reid R.

    2007-01-01

    Bradford, S. (2003) Are Hybrid Cars Worth It? Smartmoney 28p. C1. Hakim, D. (2005b) Hybrid-Car Tinkerers Scoff at No-Dollars and Sense of Hybrid Cars. Available from: http://

  3. Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems

    E-Print Network [OSTI]

    : Formal Verification, Abstraction, Model Checking, Hybrid Systems, Refinement, Counterexamples #12Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems Edmund Clarke a counterexample generated by the model checker. For hybrid systems, analysis of the counterexample requires

  4. Fact #722: April 9, 2012 Hybrid Vehicles Can Save Money over...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: April 9, 2012 Hybrid Vehicles Can Save Money over Time Fact 722: April 9, 2012 Hybrid Vehicles Can Save Money over Time Hybrid vehicles are typically very well equipped with...

  5. Fact #678: June 6, 2011 Manufacturer Market Share of Hybrid Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: June 6, 2011 Manufacturer Market Share of Hybrid Vehicles, 2010 Fact 678: June 6, 2011 Manufacturer Market Share of Hybrid Vehicles, 2010 From a total of 274,210 hybrid vehicle...

  6. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01

    Passive and Hybrid Heating Cooling Systems Michael]. Holtz,PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS Michael J.of passive and hybrid space heating and cooling systems are

  7. Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

    SciTech Connect (OSTI)

    Gallo, Jean-Baptiste

    2014-03-07

    Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulic hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: -Performance, -Fleet deployment, -Maintenance, -Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles throughout the trucking industry. By providing unbiased, third-party assessment of this “hybrid without batteries” technology, this report offers relevant, timely and valuable information to the industry.

  8. Transport Test Problems for Hybrid Methods Development

    SciTech Connect (OSTI)

    Shaver, Mark W.; Miller, Erin A.; Wittman, Richard S.; McDonald, Benjamin S.

    2011-12-28

    This report presents 9 test problems to guide testing and development of hybrid calculations for the ADVANTG code at ORNL. These test cases can be used for comparing different types of radiation transport calculations, as well as for guiding the development of variance reduction methods. Cases are drawn primarily from existing or previous calculations with a preference for cases which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22.

  9. Technique for Measuring Hybrid Electronic Component Reliability

    SciTech Connect (OSTI)

    Green, C.C.; Hernandez, C.L.; Hosking, F.M.; Robinson, D.; Rutherford, B.; Uribe, F.

    1999-01-01

    Materials compatibility studies of aged, engineered materials and hardware are critical to understanding and predicting component reliability, particularly for systems with extended stockpile life requirements. Nondestructive testing capabilities for component reliability would significantly enhance lifetime predictions. For example, if the detection of crack propagation through a solder joint can be demonstrated, this technique could be used to develop baseline information to statistically determine solder joint lifelengths. This report will investigate high frequency signal response techniques for nondestructively evaluating the electrical behavior of thick film hybrid transmission lines.

  10. Dueco Plug-In Hybrid Engines

    SciTech Connect (OSTI)

    Phillip Eidler

    2011-09-30

    Dueco, a final stage manufacture of utility trucks, was awarded a congressionally directed cost shared contract to develop, test, validate, and deploy several PHEV utility trucks. Odyne will be the primary subcontractor responsible for all aspects of the hybrid system including its design and installation on a truck chassis. Key objectives in this program include developing a better understanding of the storage device and system capability; improve aspects of the existing design, optimization of system and power train components, and prototype evaluation. This two year project will culminate in the delivery of at least five vehicles for field evaluation.

  11. Hybrid air foil bearing with external pressurization 

    E-Print Network [OSTI]

    Park, Soongook

    2009-05-15

    stream_source_info PARK-THESIS.pdf.txt stream_content_type text/plain stream_size 71559 Content-Encoding ISO-8859-1 stream_name PARK-THESIS.pdf.txt Content-Type text/plain; charset=ISO-8859-1 HYBRID AIR FOIL BEARING... nalytical ? x peak to peak and phase ang with difference bearing clearances; S f =0.2 and bump stiffness = 0.77 GN/m 3 0 30 60 90 120 150 180 6000 11000 16000 21000 26000 31000 Rotating speed (rpm) P h as e an gl e ( ) ? 11,150 rpm 14,171 rpm C...

  12. Hybrid electric vehicle power management system

    DOE Patents [OSTI]

    Bissontz, Jay E.

    2015-08-25

    Level voltage levels/states of charge are maintained among a plurality of high voltage DC electrical storage devices/traction battery packs that are arrayed in series to support operation of a hybrid electric vehicle drive train. Each high voltage DC electrical storage device supports a high voltage power bus, to which at least one controllable load is connected, and at least a first lower voltage level electrical distribution system. The rate of power transfer from the high voltage DC electrical storage devices to the at least first lower voltage electrical distribution system is controlled by DC-DC converters.

  13. Measure Guideline: Hybrid Foundation Insulation Retrofits

    SciTech Connect (OSTI)

    K. Ueno and J. Lstiburek

    2012-05-01

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a “partial drainage” detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  14. Measure Guideline: Hybrid Foundation Insulation Retrofits

    SciTech Connect (OSTI)

    Ueno, K.; Lstiburek, J.

    2012-05-01

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a 'partial drainage' detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  15. Hybrid stretchable circuits on silicone substrate

    SciTech Connect (OSTI)

    Robinson, A., E-mail: adam.1.robinson@nokia.com; Aziz, A., E-mail: a.aziz1@lancaster.ac.uk [Nanoscience Centre, University of Cambridge, Cambridge CB01FF (United Kingdom); Liu, Q.; Suo, Z. [School of Engineering and Applied Sciences and Kavli Institute for Bionano Science and Technology, Harvard University, Cambridge, Massachusetts 02138 (United States); Lacour, S. P., E-mail: stephanie.lacour@epfl.ch [Centre for Neuroprosthetics and Laboratory for Soft Bioelectronics Interfaces, School of Engineering, Ecole Polytechnique Fédérale de Lausanne, Lausanne 1015 (Switzerland)

    2014-04-14

    When rigid and stretchable components are integrated onto a single elastic carrier substrate, large strain heterogeneities appear in the vicinity of the deformable-non-deformable interfaces. In this paper, we report on a generic approach to manufacture hybrid stretchable circuits where commercial electronic components can be mounted on a stretchable circuit board. Similar to printed circuit board development, the components are electrically bonded on the elastic substrate and interconnected with stretchable electrical traces. The substrate—a silicone matrix carrying concentric rigid disks—ensures both the circuit elasticity and the mechanical integrity of the most fragile materials.

  16. Hybrid sol-gel optical materials

    DOE Patents [OSTI]

    Zeigler, John M. (Albuquerque, NM)

    1992-01-01

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  17. Hybrid sol-gel optical materials

    DOE Patents [OSTI]

    Zeigler, J.M.

    1993-04-20

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  18. Hybrid sol-gel optical materials

    DOE Patents [OSTI]

    Zeigler, John M. (Albuquerque, NM)

    1993-01-01

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  19. Multicanonical hybrid Monte Carlo for compact QED

    E-Print Network [OSTI]

    G. Arnold; Th. Lippert; K. Schilling

    1999-09-14

    We demonstrate that substantial progress can be achieved in the study of the phase structure of 4-dimensional compact QED by a joint use of hybrid Monte Carlo and multicanonical algorithms, through an efficient parallel implementation. This is borne out by the observation of considerable speedup of tunnelling between the metastable states, close to the phase transition, on the Wilson line. Our approach leads to a general parallelization scheme for the efficient stochastic sampling of systems where (a part of) the Hamiltonian involves the total action or energy in each update step.

  20. Hydraulic Hybrid Systems | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources JumpNewTexas: EnergyHunterdonHutto,Fuel Cell Corporation JumpHybrid

  1. Highline Hydrogen Hybrids | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources Jump to:Hershey,High-Temperature DownholeNewHydrogen Hybrids Jump

  2. NREL: Learning - Hybrid Electric Vehicle Basics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial Toolkit The Geospatial ToolkitElectricity ProductionHybrid

  3. Poulsen Hybrid, LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly SmartDB-2, BluePoulsen Hybrid, LLC Jump to: navigation, search

  4. hybrid vehicle systems | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years5/04 |3 The Retrieval ofHybrid

  5. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHoursaUSHumanHuntingHybrid

  6. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein Khalil Hussein Khalil Director of Find MoreHybrid

  7. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein Khalil Hussein Khalil Director of FindHybrid

  8. Alternative Fuels Data Center: Hybrid Electric Vehicles

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg FindPortsas aEthanolAFDC PrintableHybrid Electric

  9. High-Power Electrochemical Storage Devices and Plug-in Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Power Electrochemical Storage Devices and Plug-in Hybrid Electric Vehicle Battery Development High-Power Electrochemical Storage Devices and Plug-in Hybrid Electric Vehicle...

  10. Performance Characteristics of Lithium-ion Batteries of Various Chemistries for Plug-in Hybrid Vehicles

    E-Print Network [OSTI]

    Burke, Andrew; Miller, Marshall

    2009-01-01

    Characteristics of Lithium-ion Batteries of VariousAdvisor utilizing lithium-ion batteries of the differentin hybrids. Keywords: lithium-ion batteries, plug-in hybrid

  11. Hybrid and Plug-In Electric Vehicles (Brochure), Vehicle Technologies Program (VTP)

    Broader source: Energy.gov [DOE]

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  12. Scalable, Low-Cost, High Performance IPM Motor for Hybrid Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Scalable, Low-Cost, High Performance IPM Motor for Hybrid Vehicles Scalable, Low-Cost, High Performance IPM Motor for Hybrid Vehicles Vehicle...

  13. Electrochemical Capacitors as Energy Storage in Hybrid-Electric Vehicles: Present Status and Future Prospects

    E-Print Network [OSTI]

    Burke, Andy; Miller, Marshall

    2009-01-01

    batteries and ultracapacitors for electric vehicles. EVS24Battery, Hybrid and Fuel Cell Electric Vehicle Symposiumpublications on electric and hybrid vehicle technology and

  14. Fuel Cell Hybrid Bus Lands at Hickam AFB: Hydrogen Fuel Cell...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Bus Lands at Hickam AFB: Hydrogen Fuel Cell & Infrastructure Technologies Program, Fuel Cell Bus Demonstration Project (Fact Sheet) Fuel Cell Hybrid Bus Lands at Hickam AFB:...

  15. On the Capacity of Hybrid Wireless Networks Benyuan Liu

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    On the Capacity of Hybrid Wireless Networks Benyuan Liu , Zhen Liu + , Don Towsley Department 704 Yorktown Heights, NY 10598 Abstract-- We study the throughput capacity of hybrid wireless networks stations are assumed to be connected by a high-bandwidth wired network and act as relays for wireless nodes

  16. Proton corebeam system in the expanding solar wind: Hybrid simulations

    E-Print Network [OSTI]

    California at Berkeley, University of

    Proton corebeam system in the expanding solar wind: Hybrid simulations Petr Hellinger1,2 and Pavel 9 November 2011. [1] Results of a twodimensional hybrid expanding box simulation of a proton to a decrease of the ratio between the proton perpendicular and parallel temperatures as well as to an increase

  17. Energy Harvesting Communications with Hybrid Energy Storage and Processing Cost

    E-Print Network [OSTI]

    Ulukus, Sennur

    Energy Harvesting Communications with Hybrid Energy Storage and Processing Cost Omur Ozel Khurram with an energy harvesting transmitter with non-negligible processing circuitry power and a hybrid energy storage for energy storage while the battery has unlimited space. The transmitter stores the harvested energy either

  18. Hybrid Renewable Energy Investment in Microgrid Hao Wang, Jianwei Huang

    E-Print Network [OSTI]

    Huang, Jianwei

    Hybrid Renewable Energy Investment in Microgrid Hao Wang, Jianwei Huang Network Communications: {haowang, jwhuang}@ie.cuhk.edu.hk Abstract--Both solar energy and wind energy are promising renewable the hybrid renewable energy investment in the microgrid. We jointly consider the investment and operation

  19. Energy Provisioning and Operating Costs in Hybrid Solar Powered Infrastructure

    E-Print Network [OSTI]

    Karakostas, George

    energy was designed in [5]. In these projects, the basestation use of solar and wind power is mainly]. In [3], the design of a basestation that is powered by solar and diesel energy is analyzed, and in [4] a hybrid solar-wind powered basestation is described. A hybrid system consisting of solar, wind and diesel

  20. SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT

    E-Print Network [OSTI]

    SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS By XIAOWEI XU Bachelor #12;ii SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS Dissertation Approved Loop Heat Exchanger Model....................................................... 11 2.1.1.1 Modeling