National Library of Energy BETA

Sample records for diamond shamrock refining

  1. Diamond Shamrock nears completion of major expansions

    SciTech Connect (OSTI)

    True, W.R.

    1993-05-24

    With completion later this year of a second refined products line into Colorado, Diamond Shamrock Inc., San Antonio, will have added more than 600 miles of product and crude-oil pipeline on its system and expanded charge and production capacities at its two state-of-the-art refineries, all within 30 months. The projects aim at improving the company's ability to serve markets in the U.S. Southwest and increasing capacities and flexibility at its two refineries. The paper describes these projects under the following headings: new products service; another new line; and refineries, crude pipelines; Three Rivers expansion and Supplies for McKee.

  2. A procedure for diamond turning KDP crystals

    SciTech Connect (OSTI)

    Montesanti, R.C.; Thompson, S.L.

    1995-07-07

    A procedure and the equipment necessary for single-point diamond flycutting (loosely referred to as diamond turning) potassium di-hydrogen phosphate (KDP) crystals are described. It is based on current KDP diamond turning activities at the Lawrence Livermore National Laboratory (LLNL), drawing upon knowledge from the Nova crystal finishing development during the 1980`s and incorporating refinements from our efforts during 1995. In addition to describing a step-by-step process for diamond turning KDP, specific discussions are included on the necessary diamond tool geometry and edge sharpness, cutting fluid, and crystal preparation, handling, cleaning, and inspection. The authors presuppose that the reader is already familiar with diamond turning practices.

  3. Rietveld Refinement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    profile Chi-squared value 4.944 Progress so far Inverse Modeling Method 2 Fourier Method Data Model Refined Structure 40 60 80 100 120 140 160 0 1000 2000 3000 4000...

  4. Worldwide refining

    SciTech Connect (OSTI)

    NONE

    1995-12-18

    Data are presented on refining capacity by country and by company within each country. Capacity data are divided into the following processes: vacuum distillation, thermal operations, catalytic cracking, catalytic reforming, catalytic hydrocracking, catalytic hydrorefining, and catalytic hydrotreating. Production capacity is divided into: alkylation/polymerization/dimerization; aromatics/isomerization; lubricants; oxygenates; hydrogen; petroleum coke; and asphalts.

  5. Electrically conductive diamond electrodes

    DOE Patents [OSTI]

    Swain, Greg (East Lansing, MI); Fischer, Anne (Arlington, VA),; Bennett, Jason (Lansing, MI); Lowe, Michael (Holt, MI)

    2009-05-19

    An electrically conductive diamond electrode and process for preparation thereof is described. The electrode comprises diamond particles coated with electrically conductive doped diamond preferably by chemical vapor deposition which are held together with a binder. The electrodes are useful for oxidation reduction in gas, such as hydrogen generation by electrolysis.

  6. Space-time diamonds

    E-Print Network [OSTI]

    Daiqin Su; T. C. Ralph

    2015-07-02

    We show that the particle number distribution of diamond modes, modes that are localised in a finite space-time region, are thermal for the Minkowski vacuum state of a massless scalar field, an analogue to the Unruh effect. The temperature of the diamond is inversely proportional to its size. An inertial observer can detect this thermal radiation by coupling to the diamond modes using an appropriate energy scaled detector. We further investigate the correlations between various diamonds and find that entanglement between adjacent diamonds dominates.

  7. Thermally stable diamond brazing

    DOE Patents [OSTI]

    Radtke, Robert P. (Kingwood, TX)

    2009-02-10

    A cutting element and a method for forming a cutting element is described and shown. The cutting element includes a substrate, a TSP diamond layer, a metal interlayer between the substrate and the diamond layer, and a braze joint securing the diamond layer to the substrate. The thickness of the metal interlayer is determined according to a formula. The formula takes into account the thickness and modulus of elasticity of the metal interlayer and the thickness of the TSP diamond. This prevents the use of a too thin or too thick metal interlayer. A metal interlayer that is too thin is not capable of absorbing enough energy to prevent the TSP diamond from fracturing. A metal interlayer that is too thick may allow the TSP diamond to fracture by reason of bending stress. A coating may be provided between the TSP diamond layer and the metal interlayer. This coating serves as a thermal barrier and to control residual thermal stress.

  8. Diamond tool machining of materials which react with diamond

    DOE Patents [OSTI]

    Lundin, Ralph L. (Los Alamos, NM); Stewart, Delbert D. (Los Alamos, NM); Evans, Christopher J. (Gaithersburg, MD)

    1992-01-01

    Apparatus for the diamond machining of materials which detrimentally react with diamond cutting tools in which the cutting tool and the workpiece are chilled to very low temperatures. This chilling halts or retards the chemical reaction between the workpiece and the diamond cutting tool so that wear rates of the diamond tool on previously detrimental materials are comparable with the diamond turning of materials which do not react with diamond.

  9. Diamond tool machining of materials which react with diamond

    DOE Patents [OSTI]

    Lundin, R.L.; Stewart, D.D.; Evans, C.J.

    1992-04-14

    An apparatus is described for the diamond machining of materials which detrimentally react with diamond cutting tools in which the cutting tool and the workpiece are chilled to very low temperatures. This chilling halts or retards the chemical reaction between the workpiece and the diamond cutting tool so that wear rates of the diamond tool on previously detrimental materials are comparable with the diamond turning of materials which do not react with diamond. 1 figs.

  10. ITP Petroleum Refining: Profile of the Petroleum Refining Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (November 2007) ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries in California ITP Petroleum Refining: Profile of the Petroleum Refining Industry in...

  11. ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bandwidth for Petroleum Refining Processes ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes bandwidth.pdf More Documents & Publications ITP Petroleum...

  12. Amorphous diamond films

    DOE Patents [OSTI]

    Falabella, Steven (Livermore, CA)

    1998-01-01

    Amorphous diamond films having a significant reduction in intrinsic stress are prepared by biasing a substrate to be coated and depositing carbon ions thereon under controlled temperature conditions.

  13. MECS 2006- Petroleum Refining

    Broader source: Energy.gov [DOE]

    Manufacturing Energy and Carbon Footprint for Petroleum Refining (NAICS 324110) Sector with Total Energy Input, October 2012 (MECS 2006)

  14. Quantum Engineering in Diamond 

    E-Print Network [OSTI]

    Chen, Jeson

    2015-08-06

    of the NV centers yield in bulk diamond, nanodiamond (ND) size reduction, photocurrent study of the defect band-trap electronic structure in diamonds, and optimization of high-speed NV qubit control. For NV centers yield optimization, both the experimental...

  15. Diamond nucleation using polyethene

    DOE Patents [OSTI]

    Morell, Gerardo; Makarov, Vladimir; Varshney, Deepak; Weiner, Brad

    2013-07-23

    The invention presents a simple, non-destructive and non-abrasive method of diamond nucleation using polyethene. It particularly describes the nucleation of diamond on an electrically viable substrate surface using polyethene via chemical vapor deposition (CVD) technique in a gaseous environment.

  16. Ultrananocrystalline Diamond (UNCD) Seal Faces | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diamond (UNCD) Seal Faces Ultrananocrystalline Diamond (UNCD) Seal Faces New Diamond Coatings Reduce Friction and Improve Performance of Mechanical Seals Mechanical seals are used...

  17. Amorphous diamond films

    DOE Patents [OSTI]

    Falabella, S.

    1998-06-09

    Amorphous diamond films having a significant reduction in intrinsic stress are prepared by biasing a substrate to be coated and depositing carbon ions thereon under controlled temperature conditions. 1 fig.

  18. Refiners trade hydroprocessing experience

    SciTech Connect (OSTI)

    Not Available

    1984-04-16

    Hydrogen treating and conversion processes less severe than hydrocracking abound in most refineries and therefore were a subject of high interest at the National Petroleum Refiners Association question and answer session on refining technology. The present paper, which is the second abstract of the transcript of the most recent meeting, covers hydroprocessing and some of its mechanical, process, and catalytic aspects.

  19. Diamond-graphite field emitters

    DOE Patents [OSTI]

    Valone, Steven M. (Santa Fe, NM)

    1997-01-01

    A field emission electron emitter comprising an electrode of diamond and a conductive carbon, e.g., graphite, is provided.

  20. Refiners get petchems help

    SciTech Connect (OSTI)

    Wood, A.; Cornitius, T.

    1997-06-11

    The U.S.Refining Industry is facing hard times. Slow growth, tough environmental regulations, and fierce competition - especially in retail gasoline - have squeezed margins and prompted a series of mergers and acquisitions. The trend has affected the smallest and largest players, and a series of transactions over the past two years has created a new industry lineup. Among the larger companies, Mobil and Amoco are the latest to consider a refining merger. That follows recent plans by Ashland and Marathon to merge their refining businesses, and the decision by Shell, Texaco, and Saudi Aramco to combine some U.S. operations. Many of the leading independent refiners have increased their scale by acquiring refinery capacity. With refining still in the doldrums, more independents are taking a closer look at boosting production of petrochemicals, which offer high growth and, usually, better margins. That is being helped by the shift to refinery processes that favor the increased production of light olefins for alkylation and the removal of aromatics, providing opportunity to extract these materials for the petrochemical market. 5 figs., 3 tabs.

  1. Lower pressure synthesis of diamond material

    DOE Patents [OSTI]

    Lueking, Angela (State College, PA); Gutierrez, Humberto (State College, PA); Narayanan, Deepa (Redmond, WA); Burgess Clifford, Caroline E. (State College, PA); Jain, Puja (King Of Prussia, PA)

    2010-07-13

    Methods of synthesizing a diamond material, particularly nanocrystalline diamond, diamond-like carbon and bucky diamond are provided. In particular embodiments, a composition including a carbon source, such as coal, is subjected to addition of energy, such as high energy reactive milling, producing a milling product enriched in hydrogenated tetrahedral amorphous diamond-like carbon compared to the coal. A milling product is treated with heat, acid and/or base to produce nanocrystalline diamond and/or crystalline diamond-like carbon. Energy is added to produced crystalline diamond-like carbon in particular embodiments to produce bucky diamonds.

  2. Diamond turning of glass

    SciTech Connect (OSTI)

    Blackley, W.S.; Scattergood, R.O.

    1988-12-01

    A new research initiative will be undertaken to investigate the critical cutting depth concepts for single point diamond turning of brittle, amorphous materials. Inorganic glasses and a brittle, thermoset polymer (organic glass) are the principal candidate materials. Interrupted cutting tests similar to those done in earlier research are Ge and Si crystals will be made to obtain critical depth values as a function of machining parameters. The results will provide systematic data with which to assess machining performance on glasses and amorphous materials

  3. Diamond films treated with alkali-halides

    DOE Patents [OSTI]

    Anderson, D.F.; Kwan, S.W.

    1997-04-08

    A secondary electron emitter is provided and includes a substrate with a diamond film, the diamond film is treated or coated with an alkali-halide. 5 figs.

  4. Towards automated crystallographic structure refinement with phenix.refine

    SciTech Connect (OSTI)

    Afonine, Pavel V., E-mail: pafonine@lbl.gov; Grosse-Kunstleve, Ralf W.; Echols, Nathaniel; Headd, Jeffrey J.; Moriarty, Nigel W. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); Mustyakimov, Marat; Terwilliger, Thomas C. [Los Alamos National Laboratory, M888, Los Alamos, NM 87545 (United States); Urzhumtsev, Alexandre [CNRS–INSERM–UdS, 1 Rue Laurent Fries, BP 10142, 67404 Illkirch (France); Université Henri Poincaré, Nancy 1, BP 239, 54506 Vandoeuvre-lès-Nancy (France); Zwart, Peter H. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); University of California Berkeley, Berkeley, CA 94720 (United States)

    2012-04-01

    phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods. phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. It has several automation features and is also highly flexible. Several hundred parameters enable extensive customizations for complex use cases. Multiple user-defined refinement strategies can be applied to specific parts of the model in a single refinement run. An intuitive graphical user interface is available to guide novice users and to assist advanced users in managing refinement projects. X-ray or neutron diffraction data can be used separately or jointly in refinement. phenix.refine is tightly integrated into the PHENIX suite, where it serves as a critical component in automated model building, final structure refinement, structure validation and deposition to the wwPDB. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods.

  5. Diamond and Polycrystalline Diamond for MEMS Applications: Simulations and Experiments

    E-Print Network [OSTI]

    Çagin, Tahir

    Diamond and Polycrystalline Diamond for MEMS Applications: Simulations and Experiments Tahir C¸ a Communication Systems, El Segundo, CA 90025, U.S.A. Abstract To date most of the MEMS devices are been based both to surface chemistry and cohesive energy density of these likely MEMS bearing materials. Therefore

  6. High efficiency diamond solar cells

    DOE Patents [OSTI]

    Gruen, Dieter M. (Downers Grove, IL)

    2008-05-06

    A photovoltaic device and method of making same. A layer of p-doped microcrystalline diamond is deposited on a layer of n-doped ultrananocrystalline diamond such as by providing a substrate in a chamber, providing a first atmosphere containing about 1% by volume CH.sub.4 and about 99% by volume H.sub.2 with dopant quantities of a boron compound, subjecting the atmosphere to microwave energy to deposit a p-doped microcrystalline diamond layer on the substrate, providing a second atmosphere of about 1% by volume CH.sub.4 and about 89% by volume Ar and about 10% by volume N.sub.2, subjecting the second atmosphere to microwave energy to deposit a n-doped ultrananocrystalline diamond layer on the p-doped microcrystalline diamond layer. Electrodes and leads are added to conduct electrical energy when the layers are irradiated.

  7. Minimally refined biomass fuel

    DOE Patents [OSTI]

    Pearson, Richard K. (Pleasanton, CA); Hirschfeld, Tomas B. (Livermore, CA)

    1984-01-01

    A minimally refined fluid composition, suitable as a fuel mixture and derived from biomass material, is comprised of one or more water-soluble carbohydrates such as sucrose, one or more alcohols having less than four carbons, and water. The carbohydrate provides the fuel source; water solubilizes the carbohydrates; and the alcohol aids in the combustion of the carbohydrate and reduces the vicosity of the carbohydrate/water solution. Because less energy is required to obtain the carbohydrate from the raw biomass than alcohol, an overall energy savings is realized compared to fuels employing alcohol as the primary fuel.

  8. A subpicotesla diamond magnetometer

    E-Print Network [OSTI]

    Thomas Wolf; Philipp Neumann; Kazuo Nakamura; Hitoshi Sumiya; Junichi Isoya; Jörg Wrachtrup

    2014-12-19

    Diamond defect centers are promising solid state magnetometers. Single centers allow for high spatial resolution field imaging but are limited in their magnetic field sensitivity to around 10 nT/Hz^(1/2) at room-temperature. Using defect center ensembles sensitivity can be scaled as N^(1/2) when N is the number of defects. In the present work we use an ensemble of 1e11 defect centers for sensing. By carefully eliminating all noise sources like laser intensity fluctuations, microwave amplitude and phase noise we achieve a photon shot noise limited field sensitivity of 0.9 pT/Hz^(1/2) at room-temperature with an effective sensor volume of 8.5e-4 mm^3. The smallest field we measured with our device is 100 fT. While this denotes the best diamond magnetometer sensitivity so far, further improvements using decoupling sequences and material optimization could lead to fT/Hz^(1/2) sensitivity.

  9. ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    refining, metal casting, and steel making. Of these industrial sectors, petroleum refineries are one of the largest consumers of energy and the United States is the largest...

  10. Refines Efficiency Improvement

    SciTech Connect (OSTI)

    WRI

    2002-05-15

    Refinery processes that convert heavy oils to lighter distillate fuels require heating for distillation, hydrogen addition or carbon rejection (coking). Efficiency is limited by the formation of insoluble carbon-rich coke deposits. Heat exchangers and other refinery units must be shut down for mechanical coke removal, resulting in a significant loss of output and revenue. When a residuum is heated above the temperature at which pyrolysis occurs (340 C, 650 F), there is typically an induction period before coke formation begins (Magaril and Aksenova 1968, Wiehe 1993). To avoid fouling, refiners often stop heating a residuum before coke formation begins, using arbitrary criteria. In many cases, this heating is stopped sooner than need be, resulting in less than maximum product yield. Western Research Institute (WRI) has developed innovative Coking Index concepts (patent pending) which can be used for process control by refiners to heat residua to the threshold, but not beyond the point at which coke formation begins when petroleum residua materials are heated at pyrolysis temperatures (Schabron et al. 2001). The development of this universal predictor solves a long standing problem in petroleum refining. These Coking Indexes have great potential value in improving the efficiency of distillation processes. The Coking Indexes were found to apply to residua in a universal manner, and the theoretical basis for the indexes has been established (Schabron et al. 2001a, 2001b, 2001c). For the first time, a few simple measurements indicates how close undesired coke formation is on the coke formation induction time line. The Coking Indexes can lead to new process controls that can improve refinery distillation efficiency by several percentage points. Petroleum residua consist of an ordered continuum of solvated polar materials usually referred to as asphaltenes dispersed in a lower polarity solvent phase held together by intermediate polarity materials usually referred to as resins. The Coking Indexes focus on the amount of these intermediate polarity species since coke formation begins when these are depleted. Currently the Coking Indexes are determined by either titration or solubility measurements which must be performed in a laboratory. In the current work, various spectral, microscopic, and thermal techniques possibly leading to on-line analysis were explored for measuring the Coking Indexes.

  11. Fabrication of amorphous diamond films

    DOE Patents [OSTI]

    Falabella, S.

    1995-12-12

    Amorphous diamond films having a significant reduction in intrinsic stress are prepared by biasing a substrate to be coated and depositing carbon ions thereon under controlled temperature conditions. 1 fig.

  12. Amorphous-diamond electron emitter

    DOE Patents [OSTI]

    Falabella, Steven (Livermore, CA)

    2001-01-01

    An electron emitter comprising a textured silicon wafer overcoated with a thin (200 .ANG.) layer of nitrogen-doped, amorphous-diamond (a:D-N), which lowers the field below 20 volts/micrometer have been demonstrated using this emitter compared to uncoated or diamond coated emitters wherein the emission is at fields of nearly 60 volts/micrometer. The silicon/nitrogen-doped, amorphous-diamond (Si/a:D-N) emitter may be produced by overcoating a textured silicon wafer with amorphous-diamond (a:D) in a nitrogen atmosphere using a filtered cathodic-arc system. The enhanced performance of the Si/a:D-N emitter lowers the voltages required to the point where field-emission displays are practical. Thus, this emitter can be used, for example, in flat-panel emission displays (FEDs), and cold-cathode vacuum electronics.

  13. Crystal structure refinement with SHELXL

    SciTech Connect (OSTI)

    Sheldrick, George M., E-mail: gsheldr@shelx.uni-ac.gwdg.de [Department of Structural Chemistry, Georg-August Universität Göttingen, Tammannstraße 4, Göttingen 37077 (Germany)

    2015-01-01

    New features added to the refinement program SHELXL since 2008 are described and explained. The improvements in the crystal structure refinement program SHELXL have been closely coupled with the development and increasing importance of the CIF (Crystallographic Information Framework) format for validating and archiving crystal structures. An important simplification is that now only one file in CIF format (for convenience, referred to simply as ‘a CIF’) containing embedded reflection data and SHELXL instructions is needed for a complete structure archive; the program SHREDCIF can be used to extract the .hkl and .ins files required for further refinement with SHELXL. Recent developments in SHELXL facilitate refinement against neutron diffraction data, the treatment of H atoms, the determination of absolute structure, the input of partial structure factors and the refinement of twinned and disordered structures. SHELXL is available free to academics for the Windows, Linux and Mac OS X operating systems, and is particularly suitable for multiple-core processors.

  14. Double bevel construction of a diamond anvil

    DOE Patents [OSTI]

    Moss, W.C.

    1987-02-06

    Use of double or multiple bevel culet geometry on a diamond anvil to provide increased sample pressure and stability for a given force applied to the diamond tables. 7 figs.

  15. Method of Forming Diamonds from Carbonaceous Material

    SciTech Connect (OSTI)

    Daulton, Tyrone; Lewis, Roy; Rehn, Lynn; Kirk, Marquis

    1999-11-30

    A method for producing diamonds is provided comprising exposing carbonaceous material to ion irradiation at ambient temperature and pressure.

  16. Method for forming diamonds from carbonaceous material

    DOE Patents [OSTI]

    Daulton, Tyrone (Slidell, LA); Lewis, Roy (Evanston, IL); Rehn, Lynn (LaGrange, IL); Kirk, Marquis (Hinsdale, IL)

    2001-01-01

    A method for producing diamonds is provided comprising exposing carbonaceous material to ion irradiation at ambient temperature and pressure.

  17. Diamond-silicon carbide composite

    DOE Patents [OSTI]

    Qian, Jiang; Zhao, Yusheng

    2006-06-13

    Fully dense, diamond-silicon carbide composites are prepared from ball-milled microcrystalline diamond/amorphous silicon powder mixture. The ball-milled powder is sintered (P=5–8 GPa, T=1400K–2300K) to form composites having high fracture toughness. A composite made at 5 GPa/1673K had a measured fracture toughness of 12 MPa.dot.m1/2. By contrast, liquid infiltration of silicon into diamond powder at 5 GPa/1673K produces a composite with higher hardness but lower fracture toughness. X-ray diffraction patterns and Raman spectra indicate that amorphous silicon is partially transformed into nanocrystalline silicon at 5 GPa/873K, and nanocrystalline silicon carbide forms at higher temperatures.

  18. Refining the shifted topological vertex

    SciTech Connect (OSTI)

    Drissi, L. B.; Jehjouh, H.; Saidi, E. H. [Faculte des Sciences, Laboratory/UFR-Physique des Hautes Energies, Rabat, 1014 (Morocco); Groupement National de Physique des Hautes Energies (GNPHE), Siege focal:FS, Rabat, 1014 (Morocco)

    2009-01-15

    We study aspects of the refining and shifting properties of the 3d MacMahon function C{sub 3}(q) used in topological string theory and BKP hierarchy. We derive the explicit expressions of the shifted topological vertex S{sub {lambda}}{sub {mu}}{sub {nu}}(q) and its refined version T{sub {lambda}}{sub {mu}}{sub {nu}}(q,t). These vertices complete results in literature.

  19. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, J.M.

    1984-01-01

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  20. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, John M. (Greenville, TX)

    1986-01-01

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  1. EA-1795: Diamond Green Diesel Facility in Norco, LA | Department...

    Office of Environmental Management (EM)

    5: Diamond Green Diesel Facility in Norco, LA EA-1795: Diamond Green Diesel Facility in Norco, LA April 1, 2011 EA-1795: Final Environmental Assessment Loan Guarantee to Diamond...

  2. Diamonds are a Sun's Best Friend: Examining the Photoconductive Properties of Diamond to Improve TEC Efficiency

    E-Print Network [OSTI]

    Diamonds are a Sun's Best Friend: Examining the Photoconductive Properties of Diamond to Improve source in TEC devices by using the sun makes the device more efficient. This research has shown that diamond films are enhanced by photoconductivity. If the sun was used to drive a TEC device that uses

  3. Diamond-silicon carbide composite and method

    DOE Patents [OSTI]

    Zhao, Yusheng (Los Alamos, NM)

    2011-06-14

    Uniformly dense, diamond-silicon carbide composites having high hardness, high fracture toughness, and high thermal stability are prepared by consolidating a powder mixture of diamond and amorphous silicon. A composite made at 5 GPa/1673K had a measured fracture toughness of 12 MPam.sup.1/2. By contrast, liquid infiltration of silicon into diamond powder at 5 GPa/1673K produces a composite with higher hardness but lower fracture toughness.

  4. Diamond turning machine controller implementation

    SciTech Connect (OSTI)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  5. Diamond turning of thermoplastic polymers

    SciTech Connect (OSTI)

    Smith, E.; Scattergood, R.O.

    1988-12-01

    Single point diamond turning studies were made using a series of thermoplastic polymers with different glass transition temperatures. Variations in surface morphology and surface roughness were observed as a function of cutting speed. Lower glass transition temperatures facilitate smoother surface cuts and better surface finish. This can be attributed to the frictional heating that occurs during machining. Because of the very low glass transition temperatures in polymeric compared to inorganic glasses, the precision machining response can be very speed sensitive.

  6. Ultratough, Thermally Stable Polycrystalline Diamond/Silicon...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    novel diamond nanocomposites are anticipated to yield significant energy, carbon and cost savings from improved productivity (i.e., reduced total drilling time). Applications...

  7. Electromagnetic Radiation Hardness of Diamond Detectors

    E-Print Network [OSTI]

    T. Behnke; M. Doucet; N. Ghodbane; A. Imhof; C. Martinez; W. Zeuner

    2001-08-22

    The behavior of artificially grown CVD diamond films under intense electromagnetic radiation has been studied. The properties of irradiated diamond samples have been investigated using the method of thermally stimulated current and by studying their charge collection properties. Diamonds have been found to remain unaffected after doses of 6.8 MGy of 10 keV photons and 10 MGy of MeV-range photons. This observation makes diamond an attractive detector material for a calorimeter in the very forward region of the proposed TESLA detector.

  8. Superconducting nanowire single photon detector on diamond

    SciTech Connect (OSTI)

    Atikian, Haig A.; Burek, Michael J.; Choy, Jennifer T.; Lon?ar, Marko; Eftekharian, Amin; Jafari Salim, A.; Hamed Majedi, A.

    2014-03-24

    Superconducting nanowire single photon detectors are fabricated directly on diamond substrates and their optical and electrical properties are characterized. Dark count performance and photon count rates are measured at varying temperatures for 1310?nm and 632?nm photons. A multi-step diamond surface polishing procedure is reported, involving iterative reactive ion etching and mechanical polishing to create a suitable diamond surface for the deposition and patterning of thin film superconducting layers. Using this approach, diamond substrates with less than 300?pm Root Mean Square surface roughness are obtained.

  9. Reformulated Gasoline Market Affected Refiners Differently, 1995

    Reports and Publications (EIA)

    1996-01-01

    This article focuses on the costs of producing reformulated gasoline (RFG) as experienced by different types of refiners and on how these refiners fared this past summer, given the prices for RFG at the refinery gate.

  10. ITP Petroleum Refining: Energy and Environmental Profile of the...

    Energy Savers [EERE]

    Profile of the U.S. Petroleum Refining Industry (November 2007) Bandwidth Study U.S. Petroleum Refining ITP Petroleum Refining: Technology Roadmap for the Petroleum Industry...

  11. Firing of pulverized solvent refined coal

    DOE Patents [OSTI]

    Derbidge, T. Craig (Sunnyvale, CA); Mulholland, James A. (Chapel Hill, NC); Foster, Edward P. (Macungie, PA)

    1986-01-01

    An air-purged burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired without the coking thereof on the burner components. The air-purged burner is designed for the firing of pulverized solvent refined coal in a tangentially fired boiler.

  12. Fluorinated diamond bonded in fluorocarbon resin

    DOE Patents [OSTI]

    Taylor, Gene W. (Los Alamos, NM)

    1982-01-01

    By fluorinating diamond grit, the grit may be readily bonded into a fluorocarbon resin matrix. The matrix is formed by simple hot pressing techniques. Diamond grinding wheels may advantageously be manufactured using such a matrix. Teflon fluorocarbon resins are particularly well suited for using in forming the matrix.

  13. Energy Harvesting Diamond Channel with Energy Cooperation

    E-Print Network [OSTI]

    Ulukus, Sennur

    Energy Harvesting Diamond Channel with Energy Cooperation Berk Gurakan Sennur Ulukus Department@umd.edu Abstract--We consider the energy harvesting diamond channel, where the source and two relays harvest energy the option of wirelessly transferring some of its energy to the relays via energy cooperation. We find

  14. Double bevel construction of a diamond anvil

    DOE Patents [OSTI]

    Moss, W.C.

    1988-10-11

    A double or multiple bevel culet geometry is used on a diamond anvil in a high pressure cell apparatus to provide increased sample pressure and stability for a given force applied to the diamond tables. Double or multiple bevel culet geometries can also be used for sapphire or other hard crystal anvils. Pressures up to and above 5 Megabars can be reached. 8 figs.

  15. A Refined Harmonic Rayleigh--Ritz Procedure and an Explicitly Restarted Refined Harmonic Arnoldi Algorithm #

    E-Print Network [OSTI]

    Jia, Zhongxiao

    A Refined Harmonic Rayleigh--Ritz Procedure and an Explicitly Restarted Refined Harmonic Arnoldi Algorithm # Guizhi Chen + Zhongxiao Jia # Abstract The work is fourfold. First, a refined harmonic Rayleigh--Ritz procedure is proposed, some relationships are established between the refined harmonic Ritz vector

  16. Self-composite comprised of nanocrystalline diamond and a non-diamond component useful for thermoelectric applications

    DOE Patents [OSTI]

    Gruen, Dieter M.

    2012-09-04

    One provides nanocrystalline diamond material that comprises a plurality of substantially ordered diamond crystallites that are sized no larger than about 10 nanometers. One then disposes a non-diamond component within the nanocrystalline diamond material. By one approach this non-diamond component comprises an electrical conductor that is formed at the grain boundaries that separate the diamond crystallites from one another. The resultant nanowire is then able to exhibit a desired increase with respect to its ability to conduct electricity while also preserving the thermal conductivity behavior of the nanocrystalline diamond material.

  17. Self-composite comprised of nanocrystalline diamond and a non-diamond component useful for thermoelectric applications

    DOE Patents [OSTI]

    Gruen, Dieter M. (Downers Grove, IL)

    2009-08-11

    One provides nanocrystalline diamond material that comprises a plurality of substantially ordered diamond crystallites that are sized no larger than about 10 nanometers. One then disposes a non-diamond component within the nanocrystalline diamond material. By one approach this non-diamond component comprises an electrical conductor that is formed at the grain boundaries that separate the diamond crystallites from one another. The resultant nanowire is then able to exhibit a desired increase with respect to its ability to conduct electricity while also preserving the thermal conductivity behavior of the nanocrystalline diamond material.

  18. First principles study of Fe in diamond: A diamond-based half metallic dilute magnetic semiconductor

    SciTech Connect (OSTI)

    Benecha, E. M.; Lombardi, E. B.

    2013-12-14

    Half-metallic ferromagnetic ordering in semiconductors, essential in the emerging field of spintronics for injection and transport of highly spin polarised currents, has up to now been considered mainly in III–V and II–VI materials. However, low Curie temperatures have limited implementation in room temperature device applications. We report ab initio Density Functional Theory calculations on the properties of Fe in diamond, considering the effects of lattice site, charge state, and Fermi level position. We show that the lattice sites and induced magnetic moments of Fe in diamond depend strongly on the Fermi level position and type of diamond co-doping, with Fe being energetically most favorable at the substitutional site in p-type and intrinsic diamond, while it is most stable at a divacancy site in n-type diamond. Fe induces spin polarized bands in the band gap, with strong hybridization between Fe-3d and C-2s,2p bands. We further consider Fe-Fe spin interactions in diamond and show that substitutional Fe{sup +1} in p-type diamond exhibits a half-metallic character, with a magnetic moment of 1.0??{sub B} per Fe atom and a large ferromagnetic stabilization energy of 33?meV, an order of magnitude larger than in other semiconductors, with correspondingly high Curie temperatures. These results, combined with diamond's unique properties, demonstrate that Fe doped p-type diamond is likely to be a highly suitable candidate material for spintronics applications.

  19. Amorphous Diamond MEMS and Sensors

    SciTech Connect (OSTI)

    SULLIVAN, JOHN P.; FRIEDMANN, THOMAS A.; ASHBY, CAROL I.; DE BOER, MAARTEN P.; SCHUBERT, W. KENT; SHUL, RANDY J.; HOHLFELDER, ROBERT J.; LAVAN, D.A.

    2002-06-01

    This report describes a new microsystems technology for the creation of microsensors and microelectromechanical systems (MEMS) using stress-free amorphous diamond (aD) films. Stress-free aD is a new material that has mechanical properties close to that of crystalline diamond, and the material is particularly promising for the development of high sensitivity microsensors and rugged and reliable MEMS. Some of the unique properties of aD include the ability to easily tailor film stress from compressive to slightly tensile, hardness and stiffness 80-90% that of crystalline diamond, very high wear resistance, a hydrophobic surface, extreme chemical inertness, chemical compatibility with silicon, controllable electrical conductivity from insulating to conducting, and biocompatibility. A variety of MEMS structures were fabricated from this material and evaluated. These structures included electrostatically-actuated comb drives, micro-tensile test structures, singly- and doubly-clamped beams, and friction and wear test structures. It was found that surface micromachined MEMS could be fabricated in this material easily and that the hydrophobic surface of the film enabled the release of structures without the need for special drying procedures or the use of applied hydrophobic coatings. Measurements using these structures revealed that aD has a Young's modulus of {approx}650 GPa, a tensile fracture strength of 8 GPa, and a fracture toughness of 8 MPa{center_dot}m {sup 1/2}. These results suggest that this material may be suitable in applications where stiction or wear is an issue. Flexural plate wave (FPW) microsensors were also fabricated from aD. These devices use membranes of aD as thin as {approx}100 nm. The performance of the aD FPW sensors was evaluated for the detection of volatile organic compounds using ethyl cellulose as the sensor coating. For comparable membrane thicknesses, the aD sensors showed better performance than silicon nitride based sensors. Greater than one order of magnitude increase in chemical sensitivity is expected through the use of ultra-thin aD membranes in the FPW sensor. The discoveries and development of the aD microsystems technology that were made in this project have led to new research projects in the areas of aD bioMEMS and aD radio frequency MEMS.

  20. Multifrequency spin resonance in diamond

    SciTech Connect (OSTI)

    Childress, Lilian; McIntyre, Jean

    2010-09-15

    Magnetic resonance techniques provide a powerful tool for controlling spin systems, with applications ranging from quantum information processing to medical imaging. Nevertheless, the behavior of a spin system under strong excitation remains a rich dynamical problem. In this paper, we examine spin resonance of the nitrogen-vacancy center in diamond under conditions outside the regime where the usual rotating-wave approximation applies, focusing on effects of multifrequency excitation and excitation with orientation parallel to the spin quantization axis. Strong-field phenomena such as multiphoton transitions and coherent destruction of tunneling are observed in the spectra and analyzed via numerical and analytic theory. In addition to illustrating the response of a spin system to strong multifrequency excitation, these observations may inform techniques for manipulating electron-nuclear spin quantum registers.

  1. Effective placement of detectors at diamond interchanges 

    E-Print Network [OSTI]

    Prabhakar, Dayakar

    1994-01-01

    Most signalized interchanges in Texas are tight urban diamond interchanges of freeways having one-way frontage roads. At these interchanges, traffic actuated control with improper location of detectors may result in inefficient traffic operations...

  2. Diamond coated silicon field emitter array

    SciTech Connect (OSTI)

    S. Albin; W. Fu; A. Varghese; A. C. Lavarias; G. R. Myneni

    1999-07-01

    Diamond coated silicon tip arrays, with and without a self-aligned gate, were fabricated, and current-voltage characteristics of 400 tips were measured. Diamond films were grown uniformly on Si tips using microwave plasma after nucleation with 10 nm diamond suspension and substrate bias. An emission current of 57 ?A was obtained at 5 V from the ungated array tips separated from an anode at 2 ?m. In the case of the gated arrays with 1.5 ?m aperture, an emission current of 3.4 ?A was measured at a gate voltage of 80 V for an anode separation of 200 ?m. The turn-on voltages for these two types of devices were 0.2 and 40 V, respectively. Diamond coated Si tip arrays have potential applications in field emission based low voltage vacuum electronic devices and microsensors.

  3. Refiners Increasingly Employing Catalyst Regeneration as Alternative...

    Open Energy Info (EERE)

    million by the end of 2019. Refiners Benefit from Catalyst Regeneration Technology via Price Reductions and Lower Maintenance Costs The catalyst regeneration technology is the...

  4. In Situ Tribo-Electrochemical Characterization of Diamond-Containing Materials 

    E-Print Network [OSTI]

    Xiao, Huaping

    2014-07-31

    and the diamond surface. In the present research, the wear mechanism of diamond-reinforced composite has been demonstrated. The amorphization-wear process of diamond can be real-timely monitored using electrochemical approach. The frication force between diamond...

  5. Diamond film growth from fullerene precursors

    DOE Patents [OSTI]

    Gruen, D.M.; Liu, S.; Krauss, A.R.; Pan, X.

    1997-04-15

    A method and system are disclosed for manufacturing diamond film. The method involves forming a fullerene vapor, providing a noble gas stream and combining the gas with the fullerene vapor, passing the combined fullerene vapor and noble gas carrier stream into a chamber, forming a plasma in the chamber causing fragmentation of the fullerene and deposition of a diamond film on a substrate. 10 figs.

  6. Plasma spraying method for forming diamond and diamond-like coatings

    DOE Patents [OSTI]

    Holcombe, Cressie E. (Farragut, TN); Seals, Roland D. (Oak Ridge, TN); Price, R. Eugene (Knoxville, TN)

    1997-01-01

    A method and composition for the deposition of a thick layer (10) of diamond or diamond-like material. The method includes high temperature processing wherein a selected composition (12) including at least glassy carbon is heated in a direct current plasma arc device to a selected temperature above the softening point, in an inert atmosphere, and is propelled to quickly quenched on a selected substrate (20). The softened or molten composition (18) crystallizes on the substrate (20) to form a thick deposition layer (10) comprising at least a diamond or diamond-like material. The selected composition (12) includes at least glassy carbon as a primary constituent (14) and may include at least one secondary constituent (16). Preferably, the secondary constituents (16) are selected from the group consisting of at least diamond powder, boron carbide (B.sub.4 C) powder and mixtures thereof.

  7. Plasma spraying method for forming diamond and diamond-like coatings

    DOE Patents [OSTI]

    Holcombe, C.E.; Seals, R.D.; Price, R.E.

    1997-06-03

    A method and composition is disclosed for the deposition of a thick layer of diamond or diamond-like material. The method includes high temperature processing wherein a selected composition including at least glassy carbon is heated in a direct current plasma arc device to a selected temperature above the softening point, in an inert atmosphere, and is propelled to quickly quenched on a selected substrate. The softened or molten composition crystallizes on the substrate to form a thick deposition layer comprising at least a diamond or diamond-like material. The selected composition includes at least glassy carbon as a primary constituent and may include at least one secondary constituent. Preferably, the secondary constituents are selected from the group consisting of at least diamond powder, boron carbide (B{sub 4}C) powder and mixtures thereof. 9 figs.

  8. n-Type diamond and method for producing same

    DOE Patents [OSTI]

    Anderson, Richard J. (Oakland, CA)

    2002-01-01

    A new n-type semiconducting diamond is disclosed, which is doped with n-type dopant atoms. Such diamond is advantageously formed by chemical vapor deposition from a source gas mixture comprising a carbon source compound for the diamond, and a volatile hot wire filament for the n-type impurity species, so that the n-type impurity atoms are doped in the diamond during its formation. A corresponding chemical vapor deposition method of forming the n-type semiconducting diamond is disclosed. The n-type semiconducting diamond of the invention may be usefully employed in the formation of diamond-based transistor devices comprising pn diamond junctions, and in other microelectronic device applications.

  9. Sparkling Diamonds – Reducing High Energy in the Frozen North 

    E-Print Network [OSTI]

    Feldman, J.

    2007-01-01

    De Beers, the undisputed world leader in diamond mining, in a typically proactive approach, completed an energy review at the Snap Lake Diamond Mine in the Northwest Territories. What makes the approach unique is that the mine is still under...

  10. Study of Electron Transport and Amplification in Diamond

    SciTech Connect (OSTI)

    Muller, Erik M.; Ben-Zvi, Ilan

    2013-03-31

    As a successful completion of this award, my group has demonstrated world-leading electron gain from diamond for use in a diamond-amplified photocathode. Also, using high-resolution photoemission measurements we were able to uncover exciting new physics of the electron emission mechanisms from hydrogen terminated diamond. Our work, through the continued support of HEP, has resulted in a greater understanding of the diamond material science, including current limits, charge transport modeling, and spatial uniformity.

  11. ORC Seminar Series Presents: "Diamond adds brilliance: Power scaling

    E-Print Network [OSTI]

    Molinari, Marc

    ORC Seminar Series Presents: "Diamond adds brilliance: Power scaling diamond Raman lasers: Building 46, Rm 4050 (ORC Boardroom) Abstract: In this presentation I will review my work to date on power formatting for high-brightness laser diode arrays and most recently power scaling diamond Raman lasers. http://www.orc

  12. Firing of pulverized solvent refined coal

    DOE Patents [OSTI]

    Lennon, Dennis R. (Allentown, PA); Snedden, Richard B. (McKeesport, PA); Foster, Edward P. (Macungie, PA); Bellas, George T. (Library, PA)

    1990-05-15

    A burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired successfully without any performance limitations and without the coking of the solvent refined coal on the burner components. The burner is provided with a tangential inlet of primary air and pulverized fuel, a vaned diffusion swirler for the mixture of primary air and fuel, a center water-cooled conical diffuser shielding the incoming fuel from the heat radiation from the flame and deflecting the primary air and fuel steam into the secondary air, and a watercooled annulus located between the primary air and secondary air flows.

  13. North Dakota Refining Capacity Study

    SciTech Connect (OSTI)

    Dennis Hill; Kurt Swenson; Carl Tuura; Jim Simon; Robert Vermette; Gilberto Marcha; Steve Kelly; David Wells; Ed Palmer; Kuo Yu; Tram Nguyen; Juliam Migliavacca

    2011-01-05

    According to a 2008 report issued by the United States Geological Survey, North Dakota and Montana have an estimated 3.0 to 4.3 billion barrels of undiscovered, technically recoverable oil in an area known as the Bakken Formation. With the size and remoteness of the discovery, the question became 'can a business case be made for increasing refining capacity in North Dakota?' And, if so what is the impact to existing players in the region. To answer the question, a study committee comprised of leaders in the region's petroleum industry were brought together to define the scope of the study, hire a consulting firm and oversee the study. The study committee met frequently to provide input on the findings and modify the course of the study, as needed. The study concluded that the Petroleum Area Defense District II (PADD II) has an oversupply of gasoline. With that in mind, a niche market, naphtha, was identified. Naphtha is used as a diluent used for pipelining the bitumen (heavy crude) from Canada to crude markets. The study predicted there will continue to be an increase in the demand for naphtha through 2030. The study estimated the optimal configuration for the refinery at 34,000 barrels per day (BPD) producing 15,000 BPD of naphtha and a 52 percent refinery charge for jet and diesel yield. The financial modeling assumed the sponsor of a refinery would invest its own capital to pay for construction costs. With this assumption, the internal rate of return is 9.2 percent which is not sufficient to attract traditional investment given the risk factor of the project. With that in mind, those interested in pursuing this niche market will need to identify incentives to improve the rate of return.

  14. Vacancy induced structural changes in diamond.

    SciTech Connect (OSTI)

    Barnard, A.; Sternberg, M.; Univ. of Melbourne

    2008-01-01

    Although optically active defects in nanodiamond are being considered as candidates for optical labeling in biomedical applications, development in this area is being hindered the fact that suitable defects are rarely seen in diamond nanoparticles in the size regime required. These defects usually form as a complex with an impurity and a neutral of charged vacancy, so a measurable concentration of vacancy point defects is also necessary. Presented here are results of density functional tight binding computer simulations investigating the stability of vacancies in diamond nanoparticles with different surface structures. The results indicate that both neutral and charged vacancies alter the structure of as-grown diamond nanoparticles and are likely to diffuse out of the particle during synthesis or irradiation. We also find that suitable passivation of the particle may alleviate this problem, and hence facilitate the formation of defect complexes.

  15. Hydrogen-doped cubic diamond and the crystal structure of n-diamond Bin Wen a,b,

    E-Print Network [OSTI]

    Melnik, Roderick

    Hydrogen-doped cubic diamond and the crystal structure of n-diamond Bin Wen a,b, , Roderick Melnik. In particular, hydrogen concen- tration dependent elastic constants and lattice parameters for the H-doped diamond have been analyzed. Our results indicate that when the hydrogen concentration is less than 19 at

  16. Wear of diamond and diamondlike carbon films.

    SciTech Connect (OSTI)

    Erdemir, A.; Energy Technology

    2002-01-01

    Detailed tribological studies on diamond and diamond-like carbon (DLC) films have confirmed that these films are inherently self-lubricating and resistant to abrasive, adhesive and corrosive wear. Because of their high chemical inertness, they are also resistant to corrosion and oxidation (even at elevated temperatures). The combination of such exceptional qualities in these films makes them ideal for a wide range of demanding tribological applications (such as microelectromechanical systems, cutting tools, mechanical seals, magnetic hard disks, etc.). These films, available for more than three decades, have been used extensively for tooling and magnetic hard disk applications. Their potential in other application areas is currently being explored around the world. With the development of new and more robust deposition methods in recent years, it is envisioned that the production of high quality diamond and DLC films will become very cost effective and highly reliable for large-scale applications in the transportation and manufacturing sectors. In this paper, sliding wear mechanisms of diamond and DLC films will be presented. Specifically, it will be shown that, in general the wear of these films is extremely low (mainly because of their exceptional hardness and low friction characteristics). Specific test conditions established during each sliding test, however, may dramatically affect the wear performance of certain diamond and DLC films. One of the dominant wear mechanismsrelates to a phase transformation that is primarily the result of very high mechanical and thermal loadings of sliding contact interfaces. The transformation products (such as disordered graphite) trapped at the sliding interface may transfer to themating surface and significantly affect friction and wear. This paper describes, in terms of structural and fundamental tribological knowledge, the ideal film microstructures and chemistry, as well as operational conditions under which diamond and DLC films perform the best and provide superlow friction and wear properties in sliding tribological applications.

  17. ITP Petroleum Refining: Impacts of Condition Assessment on Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Effective Fouling Minimization Increases the Efficiency and Productivity of Refineries ITP Petroleum Refining: Profile of the Petroleum Refining Industry in California:...

  18. Energy Efficiency Improvement in the Petroleum Refining Industry

    E-Print Network [OSTI]

    Worrell, Ernst; Galitsky, Christina

    2005-01-01

    and product flows. Energy Use in Petroleum Refining The2. Estimated energy use by petroleum refining process.EIA), 2002. Petroleum Supply Annual 2001, Energy Information

  19. STATUS OF DIAMOND SECONDARY EMISSION ENHANCED PHOTOCATHODE

    SciTech Connect (OSTI)

    RAO,T.; BEN-ZVI, I.; CHANG, X.; GRIMES, J.; GROVER, R.; ISAKOVIC, A.; SMEDLEY, J.; TODD, R.; WARREN, J.; WU, Q.

    2007-05-25

    The diamond secondary emission enhanced photocathode (SEEP) provides an attractive alternative for simple photo cathodes in high average current electron injectors. It reduces the laser power required to drive the cathode, simultaneously isolating the cathode and the FW cavity from each other, thereby protecting them from contamination and increasing their life time. In this paper, we present the latest results on the secondary electron yield using pulsed thermionic and photo cathodes as primary electron sources, shaping the diamond using laser ablation and reactive ion etching as well as the theoretical underpinning of secondary electron generation and preliminary results of modeling.

  20. Method of improving field emission characteristics of diamond thin films

    DOE Patents [OSTI]

    Krauss, Alan R. (Naperville, IL); Gruen, Dieter M. (Downer Grove, IL)

    1999-01-01

    A method of preparing diamond thin films with improved field emission properties. The method includes preparing a diamond thin film on a substrate, such as Mo, W, Si and Ni. An atmosphere of hydrogen (molecular or atomic) can be provided above the already deposited film to form absorbed hydrogen to reduce the work function and enhance field emission properties of the diamond film. In addition, hydrogen can be absorbed on intergranular surfaces to enhance electrical conductivity of the diamond film. The treated diamond film can be part of a microtip array in a flat panel display.

  1. Method of improving field emission characteristics of diamond thin films

    DOE Patents [OSTI]

    Krauss, A.R.; Gruen, D.M.

    1999-05-11

    A method of preparing diamond thin films with improved field emission properties is disclosed. The method includes preparing a diamond thin film on a substrate, such as Mo, W, Si and Ni. An atmosphere of hydrogen (molecular or atomic) can be provided above the already deposited film to form absorbed hydrogen to reduce the work function and enhance field emission properties of the diamond film. In addition, hydrogen can be absorbed on intergranular surfaces to enhance electrical conductivity of the diamond film. The treated diamond film can be part of a microtip array in a flat panel display. 3 figs.

  2. The 1987 refining and petrochemical technology yearbook

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This annual covers the latest in refining and petrochemical technology written by the experts in the field. Opening with a foreword by Richard Corbett, Refining and Petrochemical Editior of the Oil and Gas Journal. The annual includes nearly 100 articles from the 1986 issues of the Oil and Gas Journal, comprising a collection of new technical information, methods of analysis, forecasts and trends in such subject areas as plants, fuels, gasolines, coking, processing, contents, hydrocracking, equipment, catalysts, and petrochemicals.

  3. On-Chip Diamond Raman Laser

    E-Print Network [OSTI]

    Latawiec, Pawel; Burek, Michael J; Hausmann, Birgit J M; Bulu, Irfan; Loncar, Marko

    2015-01-01

    Synthetic single-crystal diamond has recently emerged as a promising platform for Raman lasers at exotic wavelengths due to its giant Raman shift, large transparency window and excellent thermal properties yielding a greatly enhanced figure-of-merit compared to conventional materials. To date, diamond Raman lasers have been realized using bulk plates placed inside macroscopic cavities, requiring careful alignment and resulting in high threshold powers (~W-kW). Here we demonstrate an on-chip Raman laser based on fully-integrated, high quality-factor, diamond racetrack micro-resonators embedded in silica. Pumping at telecom wavelengths, we show Stokes output discretely tunable over a ~100nm bandwidth around 2-{\\mu}m with output powers >250 {\\mu}W, extending the functionality of diamond Raman lasers to an interesting wavelength range at the edge of the mid-infrared spectrum. Continuous-wave operation with only ~85 mW pump threshold power in the feeding waveguide is demonstrated along with continuous, mode-hop-fr...

  4. Trends in petroleum refining process technology

    SciTech Connect (OSTI)

    Kowalczyk, D. [Refining Process Services, Cheswick, PA (United States)

    1995-12-31

    In the 1990`s, the shift toward reformulated fuels and the unrelenting economic pressures on the petroleum refining industry have led to the ongoing development of a series of technological advances to improve fuels quality and industry operating efficiency. In this paper, ten of the most innovative and high impact recent developments in petroleum refining process technology will be highlighted. Process improvements and innovations have occurred in all facets of petroleum refining operations including fluid catalytic cracking, ether production, desulfurization, hydrocracking, gas processing, environmental control and heavy oil processing. Discussed will be the technical and economic impact of each of these new technologies on the petroleum refinery of the late 20th and early 21st century.

  5. Hydrotreating operations discussed at refining meeting

    SciTech Connect (OSTI)

    NONE

    1995-06-12

    At the most recent National Petroleum Refiners Association question and answer session on refining and petrochemical technology, refiners and a panel of experts exchanged experiences on hydrotreater operations. Topics addressed included reactor pressurization, scale basket removal, and the use of antifoulants in effluent exchangers. This article presents comments from the panelists on the following questions. (1) What is the industry practice used to speed up the pressurization of 2.25 Cr/1 Mo reactors during start-up? Is there any relationship between reactor skin temperature and pressure used? (2) Has anyone removed scale baskets from a hydrotreating reactor and compared operations before and after? If so, were there any noticeable differences? Why? (3) What is the industry experience with the use of antifoulants for hydrocracking or hydrotreating reactor effluent exchangers?

  6. Diamond Shaving of Contaminated Concrete Surfaces

    SciTech Connect (OSTI)

    Mullen, Lisa K.

    2008-01-15

    Decommissioning and decontamination of existing facilities presents technological challenges. One major challenge is the removal of surface contamination from concrete floors and walls while eliminating the spread of contamination and volumetric reduction of the waste stream. Numerous methods have been tried with a varying degree of success. Recent technology has made this goal achievable and has been used successfully. This new technology is the Diamond Floor Shaver and Diamond Wall shaver. The Diamond Floor Shaver is a self-propelled, walk behind machine that literally shaves the contaminated concrete surface to specified depths. This is accomplished by using a patented system of 100 dry cutting diamond blades with offset diamond segments that interlock to provide complete shaving of the concrete surface. Grooves are eliminated which allows for a direct frisk reading to analyze results. When attached to an appropriate size vacuum, the dust produced is 100% contained. Dust is collected in drums ready for disposition and disposal. The waste produced in shaving 7,500 square feet at 1/8 inch thickness would fill a single 55 gallon drum. Production is dependent on depth of shaving but averages 100 square feet per hour. The wall shaver uses the same patented diamond drum and blades but is hydraulically driven and is deployed using a robotic arm allowing its operation to be to totally remote. It can reach ceilings as high as 20 feet. Numerous small projects were successfully completed using this technology. Large scale deployment came in 2003. Bluegrass, in conjunction with Bartlett Services, deployed this technology to support decontamination activities for closing of the Rocky Flats nuclear weapons site. Up to six floor shavers and one wall shaver were deployed in buildings B371 and B374. These buildings had up to one half-inch, fixed plutonium and beryllium contamination. Hundred-thousands of square feet of floors and walls were shaved successfully to depths of up to one half inch. Decontamination efforts were so successful the balance of the buildings could be demolished using conventional methods. The shavers helped keep the project on schedule while the vacuum system eliminated the potential for contaminants becoming airborne.

  7. Petroleum refining for the nontechnical person

    SciTech Connect (OSTI)

    Leffler, W.L.

    1985-01-01

    The second edition of this book remains a straightforward and uncomplicated text setting forth the many technical procedures involved in refining. The author has added a new chapter on simple and complex refineries and a revised chapter on gasoline blending, including current information on alcohol blending components. Contents include: Crude oil characteristics; Distilling; Flashing; The chemistry of petroleum; Catalytic cracking; Refining gas plants; Alkylation; Catalytic reforming; Residue reduction; Hydrocracking; Gasoline blending; Distillate fuels; Asphalt and residual fuel; Hydrogen, hydrotreating, and sulfur plants; Isomerization; Solvent recovery of aromatics; Ethylene plants; Simple and complex refineries; Crude oil, condensate, and natural gas liquids; Fuel values - heating values.

  8. Using supercritical fluids to refine hydrocarbons

    DOE Patents [OSTI]

    Yarbro, Stephen Lee

    2015-06-09

    A system and method for reactively refining hydrocarbons, such as heavy oils with API gravities of less than 20 degrees and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure, using a selected fluid at supercritical conditions. A reaction portion of the system and method delivers lightweight, volatile hydrocarbons to an associated contacting unit which operates in mixed subcritical/supercritical or supercritical modes. Using thermal diffusion, multiphase contact, or a momentum generating pressure gradient, the contacting unit separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques.

  9. Method to fabricate micro and nano diamond devices

    DOE Patents [OSTI]

    Morales, Alfredo M; Anderson, Richard J; Yang, Nancy Y. C.; Skinner, Jack L; Rye, Michael J

    2014-10-07

    A method including forming a diamond material on the surface of a substrate; forming a first contact and a separate second contact; and patterning the diamond material to form a nanowire between the first contact and the second contact. An apparatus including a first contact and a separate second contact on a substrate; and a nanowire including a single crystalline or polycrystalline diamond material on the substrate and connected to each of the first contact and the second contact.

  10. Methane storage capabilities of diamond analogues

    SciTech Connect (OSTI)

    Haranczyk, M; Lin, LC; Lee, K; Martin, RL; Neaton, JB; Smit, B

    2013-01-01

    Methane can be an alternative fuel for vehicular usage provided that new porous materials are developed for its efficient adsorption-based storage. Herein, we search for materials for this application within the family of diamond analogues. We used density functional theory to investigate structures in which tetrahedral C atoms of diamond are separated by-CC-or-BN-groups, as well as ones involving substitution of tetrahedral C atoms with Si and Ge atoms. The adsorptive and diffusive properties of methane are studied using classical molecular simulations. Our results suggest that the all-carbon structure has the highest volumetric methane uptake of 280 VSTP/V at p = 35 bar and T = 298 K. However, it suffers from limited methane diffusion. Alternatively, the considered Si and Ge-containing analogies have fast diffusive properties but their adsorption is lower, ca. 172-179 VSTP/V, at the same conditions.

  11. Measurement of tool forces in diamond turning

    SciTech Connect (OSTI)

    Drescher, J.; Dow, T.A.

    1988-12-01

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  12. Precision diamond grinding of ceramics and glass

    SciTech Connect (OSTI)

    Smith, S.; Paul, H.; Scattergood, R.O.

    1988-12-01

    A new research initiative will be undertaken to investigate the effect of machine parameters and material properties on precision diamond grinding of ceramics and glass. The critical grinding depth to initiate the plastic flow-to-brittle fracture regime will be directly measured using plunge-grind tests. This information will be correlated with machine parameters such as wheel bonding and diamond grain size. Multiaxis grinding tests will then be made to provide data more closely coupled with production technology. One important aspect of the material property studies involves measuring fracture toughness at the very short crack sizes commensurate with grinding damage. Short crack toughness value`s can be much less than the long-crack toughness values measured in conventional fracture tests.

  13. Ultratough CVD single crystal diamond and three dimensional growth thereof

    DOE Patents [OSTI]

    Hemley, Russell J. (Washington, DC); Mao, Ho-kwang (Washington, DC); Yan, Chih-shiue (Washington, DC)

    2009-09-29

    The invention relates to a single-crystal diamond grown by microwave plasma chemical vapor deposition that has a toughness of at least about 30 MPa m.sup.1/2. The invention also relates to a method of producing a single-crystal diamond with a toughness of at least about 30 MPa m.sup.1/2. The invention further relates to a process for producing a single crystal CVD diamond in three dimensions on a single crystal diamond substrate.

  14. Robust Diamond-Based RF Switch Yields Enhanced Communication...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    diamond (UNCD) as a dielectric. A specialized radio frequency (RF) micro-electromechanical system (MEMS) switch that promises enhanced capabilities for next-generation...

  15. Synthesis and characterization of a nanocrystalline diamond aerogel

    E-Print Network [OSTI]

    Pauzauskie, Peter J.

    2012-01-01

    nanocrystalline diamond aerogel Peter J. Pauzauskie a,1,2 ,Laboratory, Berkeley, CA 94720 Aerogel materials have myriadcreating a nanodiamond aerogel matrix has remained an

  16. Energy Bandwidth for Petroleum Refining Processes

    SciTech Connect (OSTI)

    none,

    2006-10-01

    The petroleum refining energy bandwidth report analyzes the most energy-intensive unit operations used in U.S. refineries: crude oil distillation, fluid catalytic cracking, catalytic hydrotreating, catalytic reforming, and alkylation. The "bandwidth" provides a snapshot of the energy losses that can potentially be recovered through best practices and technology R&D.

  17. Patterns for Refinement Automation Alexei Iliasov1

    E-Print Network [OSTI]

    Southampton, University of

    Patterns for Refinement Automation Alexei Iliasov1 , Elena Troubitsyna2 , Linas Laibinis2 in rigorous modelling and design by increasing automation of development steps. We introduce a notion establishes a basis for building a tool that would support formal system development via pattern reuse

  18. Hydrocarbon Processing`s refining processes `96

    SciTech Connect (OSTI)

    NONE

    1996-11-01

    The paper compiles information on the following refining processes: alkylation, benzene reduction, benzene saturation, catalytic cracking, catalytic reforming, coking, crude distillation, deasphalting, deep catalytic cracking, electrical desalting, ethers, fluid catalytic cracking, hydrocracking, hydrogenation, hydrotreating, isomerization, resid catalytic cracking, treating, and visbreaking. The application, products, a description of the process, yield, economics, installation, and licensor are given for each entry.

  19. Solvent dramatically affects protein structure refinement

    E-Print Network [OSTI]

    Summa, Christopher M.

    Solvent dramatically affects protein structure refinement Gaurav Chopraa , Christopher M. Summab, fold and function in aqueous solution in vivo and in vitro. In this work, we study the role of solvent explicit and implicit solvent were performed on a set of 75 native proteins to test the various energy

  20. Transforming and Refining Abstract Constraint Specifications

    E-Print Network [OSTI]

    Walsh, Toby

    Transforming and Refining Abstract Constraint Specifications Alan M. Frisch1 , Brahim Hnich2 , Ian choose model transformations to reduce greatly the amount of effort that is required to solve a problem by systematic search. It is a consid- erable challenge to automate such transformations. A problem may be viewed

  1. Substitutional Boron in Nanodiamond, Bucky-Diamond, and Nanocrystalline Diamond Grain Boundaries

    SciTech Connect (OSTI)

    Barnard, Amanda S.; Sternberg, Michael G.

    2006-10-05

    Although boron has been known for many years to be a successful dopant in bulk diamond, efficient doping of nanocrystalline diamond with boron is still being developed. In general, the location, configuration, and bonding structure of boron in nanodiamond is still unknown, including the fundamental question of whether it is located within grains or grain boundaries of thin films and whether it is within the core or at the surface of nanoparticles. Presented here are density functional tight-binding simulations examining the configuration, potential energy surface, and electronic charge of substitutional boron in various types of nanocrystalline diamond. The results predict that boron is likely to be positioned at the surface of isolated particles and at the grain boundary of thin-film samples.

  2. Proposal of room-temperature diamond maser

    E-Print Network [OSTI]

    Liang Jin; Matthias Pfänder; Nabeel Aslam; Sen Yang; Jörg Wrachtrup; Ren-Bao Liu

    2015-09-25

    Lasers have revolutionized optical science and technology, but their microwave counterpart, maser, has not realized its great potential due to its demanding work conditions (high-vacuum for gas maser and liquid-helium temperature for solid-state maser). Room-temperature solid-state maser is highly desirable, but under such conditions the lifetimes of emitters (usually electron spins) are usually too short (~ns) for population inversion. The only room-temperature solid-state maser is based on a pentacene-doped p-terphenyl crystal, which has long spin lifetime (~0.1 ms). This maser, however, operates only in the pulse mode and the material is unstable. Here we propose room-temperature maser based on nitrogen-vacancy (NV) centres in diamond, which feature long spin lifetimes at room temperature (~10 ms), high optical pump efficiency, and material stability. We demonstrate that under readily accessible conditions, room-temperature diamond maser is feasible. Room-temperature diamond maser may facilitate a broad range of microwave technologies.

  3. A Diamond Nanowire Single Photon Antenna

    E-Print Network [OSTI]

    Tom Babinec; Birgit J. M. Hausmann; Mughees Khan; Yinan Zhang; Jero Maze; Philip R. Hemmer; Marko Loncar

    2009-10-28

    The development of a robust light source that emits one photon at a time is an outstanding challenge in quantum science and technology. Here, at the transition from many to single photon optical communication systems, fully quantum mechanical effects may be utilized to achieve new capabilities, most notably perfectly secure communication via quantum cryptography. Practical implementations place stringent requirements on the device properties, including stable photon generation, room temperature operation, and efficient extraction of many photons. Single photon light emitting devices based on fluorescent dye molecules, quantum dots, and carbon nanotube material systems have all been explored, but none have simultaneously demonstrated all criteria. Here, we describe the design, fabrication, and characterization of a bright source of single photons consisting of an individual Nitrogen-vacancy color center (NV center) in a diamond nanowire operating in ambient conditions. The nanowire plays a positive role in increasing the number of single photons collected from the NV center by an order of magnitude over devices based on bulk diamond crystals, and allows operation at an order of magnitude lower power levels. This result enables a new class of nanostructured diamond devices for room temperature photonic and quantum information processing applications, and will also impact fields as diverse as biological and chemical sensing, opto-mechanics, and scanning-probe microscopy.

  4. Patterning of nanocrystalline diamond films for diamond microstructures useful in MEMS and other devices

    DOE Patents [OSTI]

    Gruen, Dieter M. (Downers Grove, IL); Busmann, Hans-Gerd (Bremen, DE); Meyer, Eva-Maria (Bremen, DE); Auciello, Orlando (Bolingbrook, IL); Krauss, Alan R. (late of Naperville, IL); Krauss, Julie R. (Naperville, IL)

    2004-11-02

    MEMS structure and a method of fabricating them from ultrananocrystalline diamond films having average grain sizes of less than about 10 nm and feature resolution of less than about one micron . The MEMS structures are made by contacting carbon dimer species with an oxide substrate forming a carbide layer on the surface onto which ultrananocrystalline diamond having average grain sizes of less than about 10 nm is deposited. Thereafter, microfabrication process are used to form a structure of predetermined shape having a feature resolution of less than about one micron.

  5. Diamond/diamond-like thin film growth in a butane plasma on unetched, unheated, N-type Si(100) substrates

    SciTech Connect (OSTI)

    Williams, E.S.; Richardson, J.S. Jr.; Anderson, D.; Starkey, K.

    1995-06-01

    Deposition of diamond/diamond-like thin films on unetched, unheated, n-type Si(100) substrates in a butane plasma is reported. An interconnection between values of index of refraction, hydrogen flow rate, butane flow rate and Rf power was determined. The H{sub 2} and C{sub 4}H{sub 10} molecules are disassociated by Rf energy to create a plasma. Carbon from the butane forms a thin diamond/diamond-like film on a suitable substrate, which in the current investigation, is n-type Si(100).

  6. Grain Refinement of Permanent Mold Cast Copper Base Alloys

    SciTech Connect (OSTI)

    M.Sadayappan; J.P.Thomson; M.Elboujdaini; G.Ping Gu; M. Sahoo

    2005-04-01

    Grain refinement is a well established process for many cast and wrought alloys. The mechanical properties of various alloys could be enhanced by reducing the grain size. Refinement is also known to improve casting characteristics such as fluidity and hot tearing. Grain refinement of copper-base alloys is not widely used, especially in sand casting process. However, in permanent mold casting of copper alloys it is now common to use grain refinement to counteract the problem of severe hot tearing which also improves the pressure tightness of plumbing components. The mechanism of grain refinement in copper-base alloys is not well understood. The issues to be studied include the effect of minor alloy additions on the microstructure, their interaction with the grain refiner, effect of cooling rate, and loss of grain refinement (fading). In this investigation, efforts were made to explore and understand grain refinement of copper alloys, especially in permanent mold casting conditions.

  7. Electrically conductive polycrystalline diamond and particulate metal based electrodes

    DOE Patents [OSTI]

    Swain, Greg M.; Wang, Jian

    2005-04-26

    An electrically conducting and dimensionally stable diamond (12, 14) and metal particle (13) electrode produced by electrodepositing the metal on the diamond is described. The electrode is particularly useful in harsh chemical environments and at high current densities and potentials. The electrode is particularly useful for generating hydrogen, and for reducing oxygen and oxidizing methanol in reactions which are of importance in fuel cells.

  8. CVD diamond: a new technology for the Paul W. May

    E-Print Network [OSTI]

    Bristol, University of

    , and as an insert and/or wear- resistant coating for cutting tools. Ob- viously, given its many unique properties polycrystalhne diamond films, or coatings, by a wide variety of chemical vapour Paul W. May, B.Sc., Ph.D. After and heat sinks, while the possibility of coating large surface areas with a continuous film of diamond

  9. Analyzing the performance of diamond-coated micro end mills.

    SciTech Connect (OSTI)

    Torres, C. D.; Heaney, P. J.; Sumant, A. V.; Hamilton, M. A.; Carpick, R. W.; Pfefferkorn, F. E.; Univ. of Wisconsin at Madison; Univ. of Pennsylvania

    2009-06-01

    A method is presented to improve the tool life and cutting performance of 300 {micro}m diameter tungsten carbide (WC) micro end mills by applying thin (<300 nm) fine-grained diamond (FGD) and nanocrystalline diamond (NCD) coatings using the hot-filament chemical vapor deposition (HF-CVD) process. The performance of the diamond-coated tools has been evaluated by comparing their performance in dry slot milling of 6061-T6 aluminum against uncoated WC micro end mills. Tool wear, coating integrity, and chip morphology were characterized using SEM and white light interferometry. The initial test results show a dramatic improvement in the tool integrity (i.e., corners not breaking off), a lower wear rate, no observable adhesion of aluminum to the diamond-coated tool, and a significant reduction in the cutting forces (>50%). Reduction of the cutting forces is attributed to the low friction and adhesion of the diamond coating. However, approximately 80% of the tools coated with the larger FGD coatings failed during testing due to delamination. Additional machining benefits were attained for the NCD films, which was obtained by using a higher nucleation density seeding process for diamond growth. This process allowed for thinner, smaller grained diamond coatings to be deposited on the micro end mills, and enabled continued operation of the tool even after the integrity of the diamond coating had been compromised. As opposed to the FGD-coated end mills, only 40% of the NCD-tools experienced delamination issues.

  10. Diamond and Related Materials 9 (2000) 12221227 www.elsevier.com/locate/diamond

    E-Print Network [OSTI]

    Bristol, University of

    2000-01-01

    have been deposited on Si substrates using CH 4 -based RF plasmas with addition of 0­21% PH 3; Diamond-like carbon; Field emission; Phosphorus doping 1. Introduction produced by a filtered cathodic arc and compatibility coupled radio frequency (RF) plasma deposition has been used to produce P-doped DLC films [9

  11. Using supercritical fluids to refine hydrocarbons

    DOE Patents [OSTI]

    Yarbro, Stephen Lee

    2014-11-25

    This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

  12. Gasification, polygeneration capture interest of refiners

    SciTech Connect (OSTI)

    Aalund, L.R.

    1996-12-09

    Integrated gasification combined cycle (IGCC) plants are moving into the mainstream of international refining. Such plants can turn refinery dregs into the whitest of all products--sparkling electricity--plus hydrogen and synthesis gas. Hydrogen is an indispensable element for cleaning up and improving modern fuels, while syngas is the feedstock for important finished petrochemicals and intermediaries. The status and potential of gasification technologies and projects were covered in a 3 day conference early in October in San Francisco. What made this conference different from others on the subject in the past was recognition that oil and natural gas producers and the international refining industry are becoming major power producers without government subsidies. Such projects can pass the scrutiny of lenders and the test of commerciality. They are not targeted simply for electricity, but also for production of hydrogen, steam, and petrochemical feedstock. The process objective for projects now far exceeds simple cogeneration. It`s now trigeneration, even polygeneration.

  13. Reaping Energy Savings from Petroleum Refining 

    E-Print Network [OSTI]

    Deng, A.; Cascone, R.

    2006-01-01

    balance given in terms of percentages of crude feed for various streams. It is noted that in California, where crude oils processed tend to be heavy, hydrocracking is often used to reduce the molecular weights of the vacuum gas oil and vacuum residual... processes. The REEP leverages Nexant’s refining expertise from its Oil and Gas business unit and DSM program implementation experience from its Energy Management business unit. The Program also fully uses the lengthened duration of the PGC funding...

  14. LOCAL REFINEMENT AND MULTILEVEL PRECONDITIONING: IMPLEMENTATION AND NUMERICAL EXPERIMENTS

    E-Print Network [OSTI]

    Holst, Michael J.

    refinement. While standard multilevel methods are effective for uniform refinement- based discretizations refined 2D and 3D meshes based on fairly standard (and easily implementable) red and red-green mesh by the Burroughs Wellcome Fund through the LJIS predoctoral training program at UC San Diego, in part by NSF (ACI

  15. Parallel Triangular Decompositions of an Oil Refining Simulation Xiaodong Zhang

    E-Print Network [OSTI]

    Moreno Maza, Marc

    important process in oil refining is to separate the crude oil into various oil products. This process the composition of the various oil products in designed refining columns operated under a given set of conditions and discussions. 1 Introduction One important process in oil refining is to separate the crude oil into various

  16. Method and apparatus for diamond wire cutting of metal structures

    DOE Patents [OSTI]

    Parsells, Robert; Gettelfinger, Geoff; Perry, Erik; Rule, Keith

    2005-04-19

    A method and apparatus for diamond wire cutting of metal structures, such as nuclear reactor vessels, is provided. A diamond wire saw having a plurality of diamond beads with beveled or chamfered edges is provided for sawing into the walls of the metal structure. The diamond wire is guided by a plurality of support structures allowing for a multitude of different cuts. The diamond wire is cleaned and cooled by CO.sub.2 during the cutting process to prevent breakage of the wire and provide efficient cutting. Concrete can be provided within the metal structure to enhance cutting efficiency and reduce airborne contaminants. The invention can be remotely controlled to reduce exposure of workers to radioactivity and other hazards.

  17. Observing bulk diamond spin coherence in high-purity nanodiamonds

    E-Print Network [OSTI]

    Helena S. Knowles; Dhiren M. Kara; Mete Atature

    2013-10-03

    Nitrogen-vacancy centres (NVs) in diamond are attractive for research straddling quantum information science and nanoscale magnetometry and thermometry. While ultrapure bulk diamond NVs sustain the longest spin coherence times among optically accessible spins, nanodiamond NVs display persistently poor spin coherence. Here we introduce high-purity nanodiamonds accommodating record-long NV coherence times, >60 us, observed via universal dynamical decoupling. We show that the main contribution to decoherence comes from nearby nitrogen impurities rather than surface states. We protect the NV spin free precession, essential to DC magnetometry, by driving solely these impurities into the motional narrowing regime. This extends the NV free induction decay time from 440 ns, longer than that in type Ib bulk diamond, to 1.27 us, which is comparable to that in type IIa (impurity-free) diamond. These properties allow the simultaneous exploitation of both high sensitivity and nanometre resolution in diamond-based emergent quantum technologies.

  18. JOURNAL OF MATERIALS SCIENCE 31 (1996) 2801 2805 Laser ablation of diamond fibres and a diamond fibre

    E-Print Network [OSTI]

    Bristol, University of

    1996-01-01

    ] and are also being considered for cutting tools [4]. A recent development has been the manufacture of diamond damage using conventional tools. The cutting and machining operations have therefore become a critical Research Agency Farnborough, GU14 6TD, UK Continuous chemical vapour-deposited diamond-coated fibres

  19. Diamond machine tool face lapping machine

    DOE Patents [OSTI]

    Yetter, H.H.

    1985-05-06

    An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

  20. Diamond, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (UtilityInstrumentsArea (DOE GTP) Jump to:SouthBar, California:WalnutDiamond,

  1. Bruce Diamond | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouthReport for the t-) S/,,5 'a C | NationalBenefitsDiamond | National

  2. Deformable elastic network refinement for low-resolution macromolecular crystallography

    SciTech Connect (OSTI)

    Schröder, Gunnar F.; Levitt, Michael; Brunger, Axel T.

    2014-09-01

    An overview of applications of the deformable elastic network (DEN) refinement method is presented together with recommendations for its optimal usage. Crystals of membrane proteins and protein complexes often diffract to low resolution owing to their intrinsic molecular flexibility, heterogeneity or the mosaic spread of micro-domains. At low resolution, the building and refinement of atomic models is a more challenging task. The deformable elastic network (DEN) refinement method developed previously has been instrumental in the determinion of several structures at low resolution. Here, DEN refinement is reviewed, recommendations for its optimal usage are provided and its limitations are discussed. Representative examples of the application of DEN refinement to challenging cases of refinement at low resolution are presented. These cases include soluble as well as membrane proteins determined at limiting resolutions ranging from 3 to 7 Å. Potential extensions of the DEN refinement technique and future perspectives for the interpretation of low-resolution crystal structures are also discussed.

  3. Tensile properties of amorphous diamond films

    SciTech Connect (OSTI)

    Lavan, D.A.; Hohlfelder, R.J.; Sullivan, J.P.; Friedmann, T.A.; Mitchell, M.A.; Ashby, C.I.

    1999-12-02

    The strength and modulus of amorphous diamond, a new material for surface micromachined MEMS and sensors, was tested in uniaxial tension by pulling laterally with a flat tipped diamond in a nanoindenter. Several sample designs were attempted. Of those, only the single layer specimen with a 1 by 2 {micro}m gage cross section and a fixed end rigidly attached to the substrate was successful. Tensile load was calculated by resolving the measured lateral and normal forces into the applied tensile force and frictional losses. Displacement was corrected for machine compliance using the differential stiffness method. Post-mortem examination of the samples was performed to document the failure mode. The load-displacement data from those samples that failed in the gage section was converted to stress-strain curves using carefully measured gage cross section dimensions. Mean fracture strength was found to be 8.5 {+-} 1.4 GPa and the modulus was 831 {+-} 94 GPa. Tensile results are compared to hardness and modulus measurements made using a nanoindenter.

  4. DIAMONDS: A new Bayesian nested sampling tool

    E-Print Network [OSTI]

    Corsaro, Enrico

    2015-01-01

    In the context of high-quality asteroseismic data provided by the NASA Kepler mission, we developed a new code, termed Diamonds (high-DImensional And multi-MOdal NesteD Sampling), for fast Bayesian parameter estimation and model comparison by means of the Nested Sampling Monte Carlo (NSMC) algorithm, an efficient and powerful method very suitable for high-dimensional problems (like the peak bagging analysis of solar-like oscillations) and multi-modal problems (i.e. problems that show multiple solutions). We applied the code to the peak bagging analysis of solar-like oscillations observed in a challenging F-type star. By means of Diamonds one is able to detect the different backgrounds in the power spectrum of the star (e.g. stellar granulation and faculae activity) and to understand whether one or two oscillation peaks can be identified or not. In addition, we demonstrate a novel approach to peak bagging based on multimodality, which is able to reduce significantly the number of free parameters involved in th...

  5. Implantation conditions for diamond nanocrystal formation in amorphous silica

    SciTech Connect (OSTI)

    Buljan, Maja; Radovic, Iva Bogdanovic; Desnica, Uros V.; Ivanda, Mile; Jaksic, Milko; Saguy, Cecile; Kalish, Rafi; Djerdj, Igor; Tonejc, Andelka; Gamulin, Ozren

    2008-08-01

    We present a study of carbon ion implantation in amorphous silica, which, followed by annealing in a hydrogen-rich environment, leads to preferential formation of carbon nanocrystals with cubic diamond (c-diamond), face-centered cubic (n-diamond), or simple cubic (i-carbon) carbon crystal lattices. Two different annealing treatments were used: furnace annealing for 1 h and rapid thermal annealing for a brief period, which enables monitoring of early nucleation events. The influence of implanted dose and annealing type on carbon and hydrogen concentrations, clustering, and bonding were investigated. Rutherford backscattering, elastic recoil detection analysis, infrared spectroscopy, transmission electron microscopy, selected area electron diffraction, ultraviolet-visible absorption measurements, and Raman spectroscopy were used to study these carbon formations. These results, combined with the results of previous investigations on similar systems, show that preferential formation of different carbon phases (diamond, n-diamond, or i-carbon) depends on implantation energy, implantation dose, and annealing conditions. Diamond nanocrystals formed at a relatively low carbon volume density are achieved by deeper implantation and/or lower implanted dose. Higher volume densities led to n-diamond and finally to i-carbon crystal formation. This observed behavior is related to damage sites induced by implantation. The optical properties of different carbon nanocrystal phases were significantly different.

  6. Observation of diamond turned OFHC copper using Scanning Tunneling Microscopy

    SciTech Connect (OSTI)

    Grigg, D.A.; Russell, P.E.; Dow, T.A.

    1988-12-01

    Diamond turned OFHC copper samples have been observed within the past few months using the Scanning Tunneling Microscope. Initial results have shown evidence of artifacts which may be used to better understand the diamond turning process. The STM`s high resolution capability and three dimensional data representation allows observation and study of surface features unobtainable with conventional profilometry systems. Also, the STM offers a better quantitative means by which to analyze surface structures than the SEM. This paper discusses findings on several diamond turned OFHC copper samples having different cutting conditions. Each sample has been cross referenced using STM and SEM.

  7. Printable, flexible and stretchable diamond for thermal management

    DOE Patents [OSTI]

    Rogers, John A; Kim, Tae Ho; Choi, Won Mook; Kim, Dae Hyeong; Meitl, Matthew; Menard, Etienne; Carlisle, John

    2013-06-25

    Various heat-sinked components and methods of making heat-sinked components are disclosed where diamond in thermal contact with one or more heat-generating components are capable of dissipating heat, thereby providing thermally-regulated components. Thermally conductive diamond is provided in patterns capable of providing efficient and maximum heat transfer away from components that may be susceptible to damage by elevated temperatures. The devices and methods are used to cool flexible electronics, integrated circuits and other complex electronics that tend to generate significant heat. Also provided are methods of making printable diamond patterns that can be used in a range of devices and device components.

  8. Substitutional Nitrogen in Nanodiamond and Bucky-Diamond Particles

    SciTech Connect (OSTI)

    Barnard, Amanda S.; Sternberg, Michael G.

    2005-09-15

    The inclusion of dopants (such as nitrogen) in diamond nanoparticles is expected to be important for use in future nanodevices, such as qubits for quantum computing. Although most commercial diamond nanoparticles contain a small fraction of nitrogen, it is still unclear whether it is located within the core or at the surface of the nanoparticle. Presented here are density functional tight binding simulations examining the configuration, potential energy surface, and electronic charge of substitutional nitrogen in nanodiamond and bucky-diamond particles. The results predict that nitrogen is likely to be positioned at the surface of both hydrogenated nanodiamond and (dehydrogenated) bucky-diamond, and that the coordination of the dopants within the particles is dependent upon the surface structure.

  9. Plasma-assisted conversion of solid hydrocarbon to diamond

    DOE Patents [OSTI]

    Valone, Steven M. (Santa Fe, NM); Pattillo, Stevan G. (Los Alamos, NM); Trkula, Mitchell (Los Alamos, NM); Coates, Don M. (Santa Fe, NM); Shah, S. Ismat (Wilmington, DE)

    1996-01-01

    A process of preparing diamond, e.g., diamond fiber, by subjecting a hydrocarbon material, e.g., a hydrocarbon fiber, to a plasma treatment in a gaseous feedstream for a sufficient period of time to form diamond, e.g., a diamond fiber is disclosed. The method generally further involves pretreating the hydrocarbon material prior to treatment with the plasma by heating within an oxygen-containing atmosphere at temperatures sufficient to increase crosslinking within said hydrocarbon material, but at temperatures insufficient to melt or decompose said hydrocarbon material, followed by heating at temperatures sufficient to promote outgassing of said crosslinked hydrocarbon material, but at temperatures insufficient to convert said hydrocarbon material to carbon.

  10. Pathogenesis of the Erythroid Failure in Diamond Blackfan Anemia

    E-Print Network [OSTI]

    Sieff, Colin A.

    Diamond Blackfan anaemia (DBA) is a severe congenital failure of erythropoiesis. Despite mutations in one of several ribosome protein genes, including RPS19, the cause of the erythroid specificity is still a mystery. We ...

  11. Ramp Compression of Diamond to 5 TPa: Experiments Taking Carbon...

    Office of Scientific and Technical Information (OSTI)

    Diamond to 5 TPa: Experiments Taking Carbon to the Thomas-Fermi-Dirac Regime Authors: Smith, R F ; Eggert, J H ; Jeanloz, R ; Duffy, T S ; Braun, D G ; Patterson, J R ; Rudd, R E...

  12. Yield Optimization of Nitrogen Vacancy Centers in Diamond 

    E-Print Network [OSTI]

    Chen, Jeson

    2012-10-19

    used in this work is Dynamitron electron beam particle accelerator (IBA Industrial, formerly Radiation Dynamics) capable of implantation energy from 300keV to 50MeV at Ruhr University at Bochum. Before ion implantation, diamonds...

  13. Robust Decoupling Techniques to Extend Quantum Coherence in Diamond

    E-Print Network [OSTI]

    Ryan, Colm A.

    We experimentally demonstrate over 2 orders of magnitude increase in the room-temperature coherence time of nitrogen-vacancy centers in diamond by implementing decoupling techniques. We show that equal pulse spacing ...

  14. Diamonds are an Electronic Device’s Best Friend

    Broader source: Energy.gov [DOE]

    Researchers at Argonne National Lab recently devised a way to use diamonds to brighten the performance of electronic devices, which could put a bit more sparkle in everyone’s day.

  15. Slip sliding away: Graphene and diamonds prove a slippery combination...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Slip sliding away: Graphene and diamonds prove a slippery combination By Jared Sagoff * May 22, 2015 Tweet EmailPrint Scientists at the U.S. Department of Energy's Argonne National...

  16. Fluorinated diamond particles bonded in a filled fluorocarbon resin matrix

    DOE Patents [OSTI]

    Taylor, Gene W. (Los Alamos, NM); Roybal, Herman E. (Santa Fe, NM)

    1985-01-01

    A method of producing fluorinated diamond particles bonded in a filled fluorocarbon resin matrix. Simple hot pressing techniques permit the formation of such matrices from which diamond impregnated grinding tools and other articles of manufacture can be produced. Teflon fluorocarbon resins filled with Al.sub.2 O.sub.3 yield grinding tools with substantially improved work-to-wear ratios over grinding wheels known in the art.

  17. Fluorinated diamond particles bonded in a filled fluorocarbon resin matrix

    DOE Patents [OSTI]

    Taylor, G.W.; Roybal, H.E.

    1983-11-14

    A method of producing fluorinated diamond particles bonded in a filled fluorocarbon resin matrix. Simple hot pressing techniques permit the formation of such matrices from which diamond impregnated grinding tools and other articles of manufacture can be produced. Teflon fluorocarbon resins filled with Al/sub 2/O/sub 3/ yield grinding tools with substantially improved work-to-wear ratios over grinding wheels known in the art.

  18. Method for the preparation of nanocrystalline diamond thin films

    DOE Patents [OSTI]

    Gruen, D.M.; Krauss, A.R.

    1998-06-30

    A method and system are disclosed for manufacturing nanocrystalline diamond film on a substrate such as field emission tips. The method involves forming a carbonaceous vapor, providing a gas stream of argon, hydrocarbon and possibly hydrogen, and combining the gas with the carbonaceous vapor, passing the combined carbonaceous vapor and gas carrier stream into a chamber, forming a plasma in the chamber causing fragmentation of the carbonaceous vapor and deposition of a diamond film on the field emission tip. 40 figs.

  19. Analysis of the influence of tool dynamics in diamond turning

    SciTech Connect (OSTI)

    Fawcett, S.C.; Luttrell, D.E.; Keltie, R.F.

    1988-12-01

    This report describes the progress in defining the role of machine and interface dynamics on the surface finish in diamond turning. It contains a review of literature from conventional and diamond machining processes relating tool dynamics, material interactions and tool wear to surface finish. Data from experimental measurements of tool/work piece interface dynamics are presented as well as machine dynamics for the DTM at the Center.

  20. Refiners react to changes in the pipeline infrastructure

    SciTech Connect (OSTI)

    Giles, K.A.

    1997-06-01

    Petroleum pipelines have long been a critical component in the distribution of crude and refined products in the U.S. Pipelines are typically the most cost efficient mode of transportation for reasonably consistent flow rates. For obvious reasons, inland refineries and consumers are much more dependent on petroleum pipelines to provide supplies of crude and refined products than refineries and consumers located on the coasts. Significant changes in U.S. distribution patterns for crude and refined products are reshaping the pipeline infrastructure and presenting challenges and opportunities for domestic refiners. These changes are discussed.

  1. Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    250 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

  2. Bandwidth Study U.S. Petroleum Refining | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining....

  3. ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency Roadmap for Petroleum Refineries in California ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries in California refiningroadmap.pdf More...

  4. New Process for Grain Refinement of Aluminum. Final Report

    SciTech Connect (OSTI)

    Dr. Joseph A. Megy

    2000-09-22

    A new method of grain refining aluminum involving in-situ formation of boride nuclei in molten aluminum just prior to casting has been developed in the subject DOE program over the last thirty months by a team consisting of JDC, Inc., Alcoa Technical Center, GRAS, Inc., Touchstone Labs, and GKS Engineering Services. The Manufacturing process to make boron trichloride for grain refining is much simpler than preparing conventional grain refiners, with attendant environmental, capital, and energy savings. The manufacture of boride grain refining nuclei using the fy-Gem process avoids clusters, salt and oxide inclusions that cause quality problems in aluminum today.

  5. ITP Petroleum Refining: Petroleum Technology Vision 2020 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Petroleum Technology Vision 2020 ITP Petroleum Refining: Petroleum Technology Vision 2020 techvision.pdf More Documents & Publications Manufacturing Energy and Carbon Footprint...

  6. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) Indexed Site

    of table. 134 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per...

  7. Diagnostic of fusion neutrons on JET tokamak using diamond detector

    SciTech Connect (OSTI)

    Nemtsev, G.; Amosov, V.; Marchenko, N.; Meshchaninov, S.; Rodionov, R.; Popovichev, S.; Collaboration: JET EFDA Conbributors

    2014-08-21

    In 2011-2012, an experimental campaign with a significant yield of fusion neutrons was carried out on the JET tokamak. During this campaign the facility was equipped with two diamond detectors based on natural and artificial CVD diamond. These detectors were designed and manufactured in State Research Center of Russian Federation TRINITI. The detectors measure the flux of fast neutrons with energies above 0.2 MeV. They have been installed in the torus hall and the distance from the center of plasma was about 3 m. For some of the JET pulses in this experiment, the neutron flux density corresponded to the operational conditions in collimator channels of ITER Vertical Neutron Camera. The main objective of diamond monitors was the measurement of total fast neutron flux at the detector location and the estimation of the JET total neutron yield. The detectors operate as threshold counters. Additionally a spectrometric measurement channel has been configured that allowed us to distinguish various energy components of the neutron spectrum. In this paper we describe the neutron signal measuring and calibration procedure of the diamond detector. Fluxes of DD and DT neutrons at the detector location were measured. It is shown that the signals of total neutron yield measured by the diamond detector correlate with signals measured by the main JET neutron diagnostic based on fission chambers with high accuracy. This experiment can be considered as a successful test of diamond detectors in ITER-like conditions.

  8. Refined knot invariants and Hilbert schemes

    E-Print Network [OSTI]

    Eugene Gorsky; Andrei Negu?

    2015-02-13

    We consider the construction of refined Chern-Simons torus knot invariants by M. Aganagic and S. Shakirov from the DAHA viewpoint of I. Cherednik. We give a proof of Cherednik's conjecture on the stabilization of superpolynomials, and then use the results of O. Schiffmann and E. Vasserot to relate knot invariants to the Hilbert scheme of points on the plane. Then we use the methods of the second author to compute these invariants explicitly in the uncolored case. We also propose a conjecture relating these constructions to the rational Cherednik algebra, as in the work of the first author, A. Oblomkov, J. Rasmussen and V. Shende. Among the combinatorial consequences of this work is a statement of the m/n shuffle conjecture.

  9. On Adaptive Mesh Refinement for Atmospheric Pollution Models

    E-Print Network [OSTI]

    Sandu, Adrian

    On Adaptive Mesh Refinement for Atmospheric Pollution Models Emil M. Constantinescu and Adrian res- olution system for modeling regional air pollution based on the chemical transport model STEM. Keywords: Air Pollution Modeling, Adaptive Mesh Refinement. 1 Introduction Inadequate grid resolution can

  10. Specification and Refinement of a RealTime Control System

    E-Print Network [OSTI]

    Smith, Graeme

    such approach via the specification and refinement of the well­known Steam Boiler Control Problem. The case calculus [Fidge et al., 1998] through the specifi­ cation and refinement of the well­known Steam Boiler. These features, although not central to the Steam Boiler Control Problem, are typical of features which must

  11. Refining and End Use Study of Coal Liquids

    SciTech Connect (OSTI)

    1997-10-01

    This report summarizes revisions to the design basis for the linear programing refining model that is being used in the Refining and End Use Study of Coal Liquids. This revision primarily reflects the addition of data for the upgrading of direct coal liquids.

  12. Pulsed laser Raman spectroscopy in the laser-heated diamond anvil...

    Office of Scientific and Technical Information (OSTI)

    Pulsed laser Raman spectroscopy in the laser-heated diamond anvil cell Citation Details In-Document Search Title: Pulsed laser Raman spectroscopy in the laser-heated diamond anvil...

  13. Investigation of the Implementation of Ramp Reversal at a Diamond Interchange 

    E-Print Network [OSTI]

    Wang, Bo

    2013-06-25

    Diamond interchange design has been commonly utilized in United States to facilitate traffic exchange between freeway and frontage roads. Another less common interchange design is X-ramp interchange, which is the reversed version of diamond...

  14. The effects of diamond injector angles on flow structures at various Mach numbers 

    E-Print Network [OSTI]

    McLellan, Justin Walter

    2006-10-30

    Numerical simulations of a three dimensional diamond jet interaction flowfield at various diamond injector half angles into a supersonic crossflow were presented in this thesis. The numerical study was performed to improve the understanding...

  15. Electronic Structure of Diamond Surfaces Functionalized by Ru(tpy)2 Ioannis Zegkinoglou,,

    E-Print Network [OSTI]

    Himpsel, Franz J.

    in photocatalysis and photovoltaics, is compared to a hydrogen- terminated diamond surface as a reference. Bulk. The implications of using diamond films as inert electron donors in photocatalysis and dye-sensitized solar cells

  16. Changing System Interfaces Consistently: a New Refinement Strategy for CSP B

    E-Print Network [OSTI]

    Doran, Simon J.

    Changing System Interfaces Consistently: a New Refinement Strategy for CSP B Steve Schneider refinement in the context of CSP B. Our motivation to include this notion of refinement within the CSP B to change the events of a CSP process and the B machines when refining a system. Notions of refinement based

  17. Two- and three-dimensional ultrananocrystalline diamond (UNCD) structures for a high resolution diamond-based MEMS technology.

    SciTech Connect (OSTI)

    Auciello, O.; Krauss, A. R.; Gruen, D. M.; Busmann, H. G.; Meyer, E. M.; Tucek, J.; Sumant, A.; Jayatissa, A.; Moldovan, N.; Mancini, D. C.; Gardos, M. N.

    2000-01-17

    Silicon is currently the most commonly used material for the fabrication of microelectromechanical systems (MEMS). However, silicon-based MEMS will not be suitable for long-endurance devices involving components rotating at high speed, where friction and wear need to be minimized, components such as 2-D cantilevers that may be subjected to very large flexural displacements, where stiction is a problem, or components that will be exposed to corrosive environments. The mechanical, thermal, chemical, and tribological properties of diamond make it an ideal material for the fabrication of long-endurance MEMS components. Cost-effective fabrication of these components could in principle be achieved by coating Si with diamond films and using conventional lithographic patterning methods in conjunction with e. g. sacrificial Ti or SiO{sub 2} layers. However, diamond coatings grown by conventional chemical vapor deposition (CVD) methods exhibit a coarse-grained structure that prevents high-resolution patterning, or a fine-grained microstructure with a significant amount of intergranular non-diamond carbon. The authors demonstrate here the fabrication of 2-D and 3-D phase-pure ultrananocrystalline diamond (UNCD) MEMS components by coating Si with UNCD films, coupled with lithographic patterning methods involving sacrificial release layers. UNCD films are grown by microwave plasma CVD using C{sub 60}-Ar or CH{sub 4}-Ar gas mixtures, which result in films that have 3--5 nm grain size, are 10--20 times smoother than conventionally grown diamond films, are extremely resistant to corrosive environments, and are predicted to have a brittle fracture strength similar to that of single crystal diamond.

  18. Steel refining with an electrochemical cell

    DOE Patents [OSTI]

    Blander, M.; Cook, G.M.

    1988-05-17

    Apparatus is described for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight oxygen and not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom. 2 figs.

  19. Steel refining with an electrochemical cell

    DOE Patents [OSTI]

    Blander, M.; Cook, G.M.

    1985-05-21

    Disclosed is an apparatus for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom.

  20. GRChombo : Numerical Relativity with Adaptive Mesh Refinement

    E-Print Network [OSTI]

    Clough, Katy; Finkel, Hal; Kunesch, Markus; Lim, Eugene A; Tunyasuvunakool, Saran

    2015-01-01

    Numerical relativity has undergone a revolution in the past decade. With a well-understood mathematical formalism, and full control over the gauge modes, it is now entering an era in which the science can be properly explored. In this work, we introduce GRChombo, a new numerical relativity code written to take full advantage of modern parallel computing techniques. GRChombo's features include full adaptive mesh refinement with block structured Berger-Rigoutsos grid generation which supports non-trivial "many-boxes-in-many-boxes" meshing hierarchies, and massive parallelism through the Message Passing Interface (MPI). GRChombo evolves the Einstein equation with the standard BSSN formalism, with an option to turn on CCZ4 constraint damping if required. We show that GRChombo passes all the standard "Apples-to-Apples" code comparison tests. We also show that it can stably and accurately evolve vacuum black hole spacetimes such as binary black hole mergers, and non-vacuum spacetimes such as scalar collapses into b...

  1. Heavy-ion irradiation induced diamond formation in carbonaceous materials.

    SciTech Connect (OSTI)

    Daulton, T. L.

    1999-01-08

    The basic mechanisms of metastable phase formation produced under highly non-equilibrium thermodynamic conditions within high-energy particle tracks are investigated. In particular, the possible formation of diamond by heavy-ion irradiation of graphite at ambient temperature is examined. This work was motivated, in part, by earlier studies which discovered nanometer-grain polycrystalline diamond aggregates of submicron-size in uranium-rich carbonaceous mineral assemblages of Precambrian age. It was proposed that the radioactive decay of uranium formed diamond in the fission particle tracks produced in the carbonaceous minerals. To test the hypothesis that nanodiamonds can form by ion irradiation, fine-grain polycrystalline graphite sheets were irradiated with 400 MeV Kr ions. The ion irradiated graphite (and unirradiated graphite control) were then subjected to acid dissolution treatments to remove the graphite and isolate any diamonds that were produced. The acid residues were then characterized by analytical and high-resolution transmission electron microscopy. The acid residues of the ion-irradiated graphite were found to contain ppm concentrations of nanodiamonds, suggesting that ion irradiation of bulk graphite at ambient temperature can produce diamond.

  2. Thermally stimulated exoelectronic emission of CVD diamond lms D. Brianda,*, P. Iacconia

    E-Print Network [OSTI]

    Bristol, University of

    Thermally stimulated exoelectronic emission of CVD diamond ®lms D. Brianda,*, P. Iacconia , M of several CVD diamond ®lms (undoped or doped with nitrogen) are studied by the thermally stimulated) ®lms, diamond is an attractive material in the ®eld of high temperature electronic applications [2

  3. Hydrogen Storage in Nano-Phase Diamond at High Temperature and Its Release

    SciTech Connect (OSTI)

    Tushar K Ghosh

    2008-10-13

    The objectives of this proposed research were: 91) Separation and storage of hydrogen on nanophase diamonds. It is expected that the produced hydrogen, which will be in a mixture, can be directed to a nanophase diamond system directly, which will not only store the hydrogen, but also separate it from the gas mixture, and (2) release of the stored hydrogen from the nanophase diamond.

  4. Electronic, Magnetic and Thermal Properties of Graphene-Diamond Hybrid S. Konabe,2, 3

    E-Print Network [OSTI]

    Maruyama, Shigeo

    of the graphene-diamond hybrid system. Energies are mea- sured from that of the Fermi level. Blue and redElectronic, Magnetic and Thermal Properties of Graphene-Diamond Hybrid Structure T. Shiga,1 S, it is demonstrated that the heat generated in the graphene nanoribbon can efficiently dissipate to the diamond region

  5. Field emission properties of phosphorus doped microwave plasma chemical vapor deposition diamond films by ion implantation

    E-Print Network [OSTI]

    Lee, Jong Duk

    to the conclusion that phosphorus ions and defects in the Si­diamond interface play an important role. INTRODUCTION A new mold type diamond field emission array FEA has been fabricated on indium tin oxide ITO defects induce the split energy bands within the wide band gap of diamond and help electrons to jump

  6. Synthesis and characterization of a nanocrystalline diamond aerogel

    SciTech Connect (OSTI)

    Pauzauskie, Peter J.; Crowhurst, Jonathan C.; Worsley, Marcus A.; Laurence, Ted A.; Kilcoyne, A. L. David; Wang, Yinmin; Willey, Trevor M.; Visbeck, Kenneth S.; Fakra, Sirine C.; Evans, William J.; Zaug, Joseph M.; Satcher, Jr., Joe H.

    2011-07-06

    Aerogel materials have myriad scientific and technological applications due to their large intrinsic surface areas and ultralow densities. However, creating a nanodiamond aerogel matrix has remained an outstanding and intriguing challenge. Here we report the high-pressure, high-temperature synthesis of a diamond aerogel from an amorphous carbon aerogel precursor using a laser-heated diamond anvil cell. Neon is used as a chemically inert, near-hydrostatic pressure medium that prevents collapse of the aerogel under pressure by conformally filling the aerogel's void volume. Electron and X-ray spectromicroscopy confirm the aerogel morphology and composition of the nanodiamond matrix. Time-resolved photoluminescence measurements of recovered material reveal the formation of both nitrogen- and silicon- vacancy point-defects, suggesting a broad range of applications for this nanocrystalline diamond aerogel.

  7. Plasma deposited diamond-like carbon films for large neutralarrays

    SciTech Connect (OSTI)

    Brown, I.G.; Blakely, E.A.; Bjornstad, K.A.; Galvin, J.E.; Monteiro, O.R.; Sangyuenyongpipat, S.

    2004-07-15

    To understand how large systems of neurons communicate, we need to develop methods for growing patterned networks of large numbers of neurons. We have found that diamond-like carbon thin films formed by energetic deposition from a filtered vacuum arc carbon plasma can serve as ''neuron friendly'' substrates for the growth of large neural arrays. Lithographic masks can be used to form patterns of diamond-like carbon, and regions of selective neuronal attachment can form patterned neural arrays. In the work described here, we used glass microscope slides as substrates on which diamond-like carbon was deposited. PC-12 rat neurons were then cultured on the treated substrates and cell growth monitored. Neuron growth showed excellent contrast, with prolific growth on the treated surfaces and very low growth on the untreated surfaces. Here we describe the vacuum arc plasma deposition technique employed, and summarize results demonstrating that the approach can be used to form large patterns of neurons.

  8. Subtractive 3D Printing of Optically Active Diamond Structures

    E-Print Network [OSTI]

    Martin, Aiden A; Aharonovich, Igor

    2014-01-01

    Diamond has recently attracted considerable attention as a promising platform for quantum technologies, photonics and high resolution sensing applications. Here we demonstrate a chemical approach that enables the fabrication of functional diamond structures using gas-mediated electron induced etching. The method achieves chemical etching at room temperature through the dissociation of surface-adsorbed H2O molecules by electron irradiation in a water vapor environment. High throughput, parallel processing is possible by electron flood exposure and the use of an etch mask, while single step, mask-free three dimensional fabrication and iterative editing are achieved using a variable pressure scanning electron microscope. The electron induced chemical etching paves the way to a transformative technology for nanofabrication of diamond and other wide band-gap semiconductors.

  9. Diamond-Silicon Carbide Composite And Method For Preparation Thereof

    DOE Patents [OSTI]

    Qian, Jiang (Los Alamos, NM); Zhao, Yusheng (Los Alamos, NM)

    2005-09-06

    Fully dense, diamond-silicon carbide composites are prepared from ball-milled microcrystalline diamond/amorphous silicon powder mixture. The ball-milled powder is sintered (P=5-8 GPa, T=1400K-2300K) to form composites having high fracture toughness. A composite made at 5 GPa/1673K had a measured fracture toughness of 12 MPa.multidot.m.sup.1/2. By contrast, liquid infiltration of silicon into diamond powder at 5 GPa/1673K produces a composite with higher hardness but lower fracture toughness. X-ray diffraction patterns and Raman spectra indicate that amorphous silicon is partially transformed into nanocrystalline silicon at 5 GPa/873K, and nanocrystalline silicon carbide forms at higher temperatures.

  10. Multigrid elliptic equation solver with adaptive mesh refinement

    E-Print Network [OSTI]

    J. David Brown; Lisa L. Lowe

    2005-03-22

    In this paper we describe in detail the computational algorithm used by our parallel multigrid elliptic equation solver with adaptive mesh refinement. Our code uses truncation error estimates to adaptively refine the grid as part of the solution process. The presentation includes a discussion of the orders of accuracy that we use for prolongation and restriction operators to ensure second order accurate results and to minimize computational work. Code tests are presented that confirm the overall second order accuracy and demonstrate the savings in computational resources provided by adaptive mesh refinement.

  11. Integrated process for the solvent refining of coal

    DOE Patents [OSTI]

    Garg, Diwakar (Macungie, PA)

    1983-01-01

    A process is set forth for the integrated liquefaction of coal by the catalytic solvent refining of a feed coal in a first stage to liquid and solid products and the catalytic hydrogenation of the solid product in a second stage to produce additional liquid product. A fresh inexpensive, throw-away catalyst is utilized in the second stage hydrogenation of the solid product and this catalyst is recovered and recycled for catalyst duty in the solvent refining stage without any activation steps performed on the used catalyst prior to its use in the solvent refining of feed coal.

  12. Reitveld refinement study of PLZT ceramics

    SciTech Connect (OSTI)

    Kumar, Rakesh; Bavbande, D. V.; Bafna, V. H.; Mohan, D.; Kothiyal, G. P.; Mishra, R.

    2013-02-05

    PLZT ceramics of composition Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3}, have been milled for 6hrs and 24hrs were prepared by solid state synthesis route. The 6hrs milled and 24hrs milled samples are represented as PLZT-6 and PLZT-24 ceramics respectively. X-ray diffraction (XRD) pattern was recorded at room temperature. The XRD pattern has been analyzed by employing Rietveld refinement method. Phase identification shows that all the peaks observed in PLZT-6 and PLZT-24 ceramics could be indexed to P4mm space group with tetragonal symmetry. The unit cell parameters of 6hrs milled PLZT ceramics are found to be a=b=4.0781(5)A and c=4.0938(7)A and for 24hrs milled PLZT ceramics unit cell parameters are a=b=4.0679(4)A and c=4.1010(5)A . The axial ratio c/a and unit cell volume of PLZT-6 are 1.0038 and 68.09(2)A{sup 3} respectively. In PLZT-24 samples, the axial ratio c/a value is 1.0080 which is little more than that of the 6hr milled PLZT sample whereas the unit cell volume decrease to 67.88 (1) A{sup 3}. An average crystallite size was estimated by using Scherrer's formula. Dielectric properties were obtained by measuring the capacitance and tand loss using Stanford LCR meter.

  13. Fabrication of Diamond Nanowires for Quantum Information Processing Applications

    E-Print Network [OSTI]

    Birgit Hausmann; Mughees Khan; Tom Babinec; Yinan Zhang; Katie Martinick; Murray McCutcheon; Phil Hemmer; Marko Loncar

    2010-02-23

    We present a design and a top-down fabrication method for realizing diamond nanowires in both bulk single crystal and polycrystalline diamond. Numerical modeling was used to study coupling between a Nitrogen Vacancy (NV) color center and optical modes of a nanowire, and to find an optimal range of nanowire diameters that allows for large collection efficiency of emitted photons. Inductively coupled plasma (ICP) reactive ion etching (RIE) with oxygen is used to fabricate the nanowires. Drop-casted nanoparticles (including $\\mathrm{Au}$, $\\mathrm{SiO_{2}}$ and $\\mathrm{Al_2O_3}$) as well as electron beam lithography defined spin-on glass and evaporated $\\mathrm{Au}$ have been used as an etch mask. We found $\\mathrm{Al_2O_3}$ nanoparticles to be the most etch resistant. At the same time FOx e-beam resist (spin-on glass) proved to be a suitable etch mask for fabrication of ordered arrays of diamond nanowires. We were able to obtain nanowires with near vertical sidewalls in both polycrystalline and single crystal diamond. The heights and diameters of the polycrystalline nanowires presented in this paper are $\\unit[\\approx1]{\\mu m}$ and $\\unit[120-340]{nm}$, respectively, having a $\\unit[200]{nm/min}$ etch rate. In the case of single crystal diamond (types Ib and IIa) nanowires the height and diameter for different diamonds and masks shown in this paper were $\\unit[1-2.4]{\\mu m}$ and $\\unit[120-490]{nm}$ with etch rates between $\\unit[190-240]{nm/min}$.

  14. Classical and Quantum Chaos in the Diamond Shaped Billiard

    E-Print Network [OSTI]

    Salazar, R; Jaramillo, D; González, D L

    2012-01-01

    We analyse the classical and quantum behaviour of a particle trapped in a diamond shaped billiard. We defined this billiard as a half stadium connected with a triangular billiard. A parameter $\\xi$ which gradually change the shape of the billiard from a regular equilateral triangle ($\\xi=1$) to a diamond ($\\xi=0$) was used to control the transition between the regular and chaotic regimes. The classical behaviour is regular when the control parameter $\\xi$ is one; in contrast, the system is chaotic when $\\xi \

  15. Diamond turning of Si and Ge single crystals

    SciTech Connect (OSTI)

    Blake, P.; Scattergood, R.O.

    1988-12-01

    Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

  16. Field emission properties of the polycrystalline diamond film prepared by microwave-assisted plasma chemical vapor deposition

    E-Print Network [OSTI]

    Lee, Jong Duk

    transparency. These properties allow diamond to be used in a few commercial products such as cutting tools, a patterned diamond nuclei is applied. For this, the substrate was coated with diamond photoresist DPR which is the normal photoresist containing 0.1 m diamond powders.7 Spin coated DPR can be patterned by using

  17. CATALYTIC CONVERSION OF SOLVENT REFINED COAL TO LIQUID PRODUCTS

    E-Print Network [OSTI]

    Tanner, K.I.

    2010-01-01

    I. Solvent Refined Coal II. Catalysts III. Purpose andSondreal, E.A. , "Viscosity of Coal Liquids - The Effect ofAnthraxylon - Kinetics of Coal Hydrogenation," Ind. and Eng.

  18. Error estimation and adaptive mesh refinement for aerodynamic flows

    E-Print Network [OSTI]

    Hartmann, Ralf

    Error estimation and adaptive mesh refinement for aerodynamic flows Ralf Hartmann1 and Paul Houston, 38108 Braunschweig, Germany Ralf.Hartmann@dlr.de 2 School of Mathematical Sciences University

  19. Error estimation and adaptive mesh refinement for aerodynamic flows

    E-Print Network [OSTI]

    Hartmann, Ralf

    Error estimation and adaptive mesh refinement for aerodynamic flows Ralf Hartmann, Joachim Held), Lilien- thalplatz 7, 38108 Braunschweig, Germany, e-mail: Ralf.Hartmann@dlr.de 1 #12;2 Ralf Hartmann

  20. Europe`s refining industry woes detailed at London meeting

    SciTech Connect (OSTI)

    Rhodes, A.

    1996-12-09

    Refiners, catalyst producers, engineering firms, and process licensers discussed Europe`s refining industry at the first-ever European Refining Technology Conference, October 28--30, London. Some 400 attendees heard presentations on European Union (EU) environmental legislation, and a variety of processing and catalyst options available to help refiners comply with the regulations. The conference consisted of two parallel sessions: one covering heavy-ends conversion and a second covering hydroprocessing and other light-ends processes. Each session included nine technical presentations, and a panel discussion in which 12 panelists answered presubmitted questions. The heavy-ends technical presentations covered topics including: fluid catalytic cracking (FCC) technology and catalysts, bottoms upgrading options, deep-cut distillation techniques, and gasification. The light-ends papers discussed: European air and fuels qualities, catalytic reforming, hydrotreating, biocatalytic desulfurization, hydrocracking, dewaxing, alkylation, and etherification.

  1. CATALYTIC CONVERSION OF SOLVENT REFINED COAL TO LIQUID PRODUCTS

    E-Print Network [OSTI]

    Tanner, K.I.

    2010-01-01

    E.A. , "Viscosity of Coal Liquids - The Effect of CharacterOF SOLVENT REFINED COAL TO LIQUID PRODUCTS Kylan I. Tanner*for Conversion of Coal to Liquid Fuels: Basic and Ex-

  2. Quantum optics with nitrogen-vacancy centers in diamond

    E-Print Network [OSTI]

    Yiwen Chu; Mikhail D. Lukin

    2015-04-22

    We review the electronic level structure of the nitrogen-vacancy in diamond and some common experimental techniques to study its optical properties at low temperatures. We then summarize several recent experiments and advances in using nitrogen-vacancy centers for quantum optics.

  3. Single Crystal Diamond Beam Position Monitors with Radiofrequency Electronic Readout

    SciTech Connect (OSTI)

    Solar, B.; Graafsma, H.; Potdevin, G.; Trunk, U. [Hasylab, Deutsches Elektronen Synchroton, Hamburg (Germany); Morse, J.; Salome, M. [Instrumentation Services and Development Division, European Synchroton Radiation Facility, Grenoble (France)

    2010-06-23

    Over the energy range 5{approx}30 keV a suitably contacted, thin ({approx}100 {mu}m) diamond plate can be operated in situ as a continuous monitor of X-ray beam intensity and position as the diamond absorbs only a small percentage of the incident beam. Single crystal diamond is a completely homogeneous material showing fast (ns), spatially uniform signal response and negligible (diamond beam position monitors of simple quadrant electrode designs with metal contacts, operated using wideband electronic readout corresponding to the RF accelerator frequency. The instrumentation for these monitors must cover a large range of operating conditions: different beam sizes, fluxes, energies and time structure corresponding to the synchrotron fill patterns. Sophisticated new RF sampling electronics can satisfy most requirements: using a modified Libera Brilliance readout system, we measured the center of gravity position of a 25 {mu}m beam at the DORIS III F4 beam line at a rate of 130 Msample/s with narrowband filtering of a few MHz bandwidth. Digitally averaging the signal further provided a spatial resolution {approx}20 nm.

  4. Diamond Lattice Model of Semicrystalline Polyethylene in the Amorphous Region

    E-Print Network [OSTI]

    Diamond Lattice Model of Semicrystalline Polyethylene in the Amorphous Region Zhong­Hui Duan Abstract The statistics of polyethylene chains in the amorphous region between two crystallites have been as models of the chain molecules in the amorphous region of semicrystalline polyethylene, both

  5. Nanopatterning of ultrananocrystalline diamond thin films via block copolymer lithography.

    SciTech Connect (OSTI)

    Ramanathan, M.; Darling, S. B.; Sumant, A. V.; Auciello, O.

    2010-07-01

    Nanopatterning of diamond surfaces is critical for the development of diamond-based microelectromechanical system/nanoelectromechanical system (MEMS/NEMS), such as resonators or switches. Micro-/nanopatterning of diamond materials is typically done using photolithography or electron beam lithography combined with reactive ion etching (RIE). In this work, we demonstrate a simple process, block copolymer (BCP) lithography, for nanopatterning of ultrananocrystalline diamond (UNCD) films to produce nanostructures suitable for the fabrication of NEMS based on UNCD. In BCP lithography, nanoscale self-assembled polymeric domains serve as an etch mask for pattern transfer. The authors used thin films of a cylinder-forming organic-inorganic BCP, poly(styrene-block-ferrocenyldimethylsilane), PS-b-PFS, as an etch mask on the surface of UNCD films. Orientational control of the etch masking cylindrical PFS blocks is achieved by manipulating the polymer film thickness in concert with the annealing treatment. We have observed that the surface roughness of UNCD layers plays an important role in transferring the pattern. Oxygen RIE was used to etch the exposed areas of the UNCD film underneath the BCP. Arrays of both UNCD posts and wirelike structures have been created using the same starting polymeric materials as the etch mask.

  6. WATERJET ASSISTED POLYCRYSTALLINE DIAMOND INDENTATION DRILLING OF ROCK

    E-Print Network [OSTI]

    improved drilling rates can provide a significant benefit, justifying the costs and effort required both of drilling and completions of the wells can account for 25 ­ 50% of the cost of the electricity whichWATERJET ASSISTED POLYCRYSTALLINE DIAMOND INDENTATION DRILLING OF ROCK Santi, P, Bell, S

  7. Automatic grid refinement criterion for lattice Boltzmann method

    E-Print Network [OSTI]

    Lagrava, Daniel; Latt, Joneas; Chopard, Bastien

    2015-01-01

    In all kinds of engineering problems, and in particular in methods for computational fluid dynamics based on regular grids, local grid refinement is of crucial importance. To save on computational expense, many applications require to resolve a wide range of scales present in a numerical simulation by locally adding more mesh points. In general, the need for a higher (or a lower) resolution is not known \\emph{a priori}, and it is therefore difficult to locate areas for which local grid refinement is required. In this paper, we propose a novel algorithm for the lattice Boltzmann method, based on physical concepts, to automatically construct a pattern of local refinement. We apply the idea to the two-dimensional lid-driven cavity and show that the automatically refined grid can lead to results of equal quality with less grid points, thus sparing computational resources and time. The proposed automatic grid refinement strategy has been implemented in the parallel open-source library Palabos.

  8. Diamond origin and genesis: A C and N stable isotope study on diamonds from a single eclogitic xenolith (Kaalvallei, South Africa)

    E-Print Network [OSTI]

    Cartigny, Pierre

    aggregation state of 35 diamonds in a single eclogite xenolith from the Kaalvallei kimberlite in South Africa, and are positively correlated with nitrogen aggregation states which vary from 11.5% to 43.7% of IaB defects with diamond formation from recycled (crustal) material which is enriched in 15 N (i.e. positive 15 N

  9. Diamond Wire Saw for Precision Machining of Laser Target Components

    SciTech Connect (OSTI)

    Bono, M J; Bennett, D W

    2005-08-08

    The fabrication of precision laser targets requires a wide variety of specialized mesoscale manufacturing techniques. The diamond wire saw developed in this study provides the capability to precisely section meso-scale workpieces mounted on the assembly stations used by the Target Fabrication Group. This new capability greatly simplifies the fabrication of many types of targets and reduces the time and cost required to build the targets. A variety of materials are used to fabricate targets, including metals, plastics with custom designed chemical formulas, and aerogels of various densities. The materials are usually provided in the form of small pieces or cast rods that must be machined to the required shape. Many of these materials, such as metals and some plastics, can be trimmed using a parting tool on a diamond turning machine. However, other materials, such as aerogels and brittle materials, cannot be adequately cut with a parting tool. In addition, the geometry of the parts often requires that the workpieces be held in a special assembly station, which excludes the use of a parting tool. In the past, these materials were sectioned using a small, handheld coping saw that used a diamond-impregnated wire as a blade. This miniature coping saw was effective, but it required several hours to cut through certain materials. Furthermore, the saw was guided by hand and often caused significant damage to fragile aerogels. To solve these problems, the diamond wire saw shown in Figure 1 was developed. The diamond wire saw is designed to machine through materials that are mounted in the Target Fabrication Group's benchtop assembly stations. These assembly stations are the primary means of aligning and assembling target components, and there is often a need to machine materials while they are mounted in the assembly stations. Unfortunately, commercially available saws are designed for very different applications and are far too large to be used with the assembly stations. Therefore, a custom diamond wire saw was designed and constructed. The diamond wire saw cuts through workpieces using a continuous loop of diamond-impregnated wire of length 840 mm. The wire loop runs around several idler pulleys and is driven by a simple geared DC motor that rotates at 17 rpm. The linear speed of the wire is 107 inches/minute. The saw is oriented at an angle of 20{sup o} from horizontal, so the operator can view the wire through the cutout at the front end of the saw. When looking through a microscope or camera with a horizontal line of sight, the operator can clearly see the wire as it cuts through the workpiece, as shown in the right side of Figure 1. The saw is mounted on a two-axis stage that allows the operator to align the wire with the workpiece. To cut through the workpiece, the operator drives the wire through the workpiece by turning the feed micrometer. An image of the interior of the diamond wire saw appears in Figure 2. This picture was taken after removing the protective cover plate from the saw.

  10. The US petroleum refining industry in the 1980's

    SciTech Connect (OSTI)

    Not Available

    1990-10-11

    As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

  11. Survey shows over 1,000 refining catalysts

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1991-10-14

    The Journal's latest survey of worldwide refining catalysts reveals that there are more than 1,040 unique catalyst designations in commercial use in 19 processing categories - an increase of some 140 since the compilation of refining catalysts was last published. As a matter of interest, some 700 catalysts were determined during the first survey. The processing categories surveyed in this paper are: Catalytic naphtha reforming. Dimerization, Isomerization (C{sub 4}), Isomerization (C{sub 5} and C{sub 6}), Isomerization (xylenes), Fluid catalytic cracking (FCC), Hydrocracking, Mild hydrocracking, hydrotreating/hydrogenation/ saturation, Hydrorefining, Polymerization, Sulfur (elemental) recovery, Steam hydrocarbon reforming, Sweetening, Clause unit tail gas treatment, Oxygenates, Combustion promoters (FCC), Sulfur oxides reduction (FCC), and Other refining processes.

  12. Trends in heavy oil production and refining in California

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II.

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10{degrees} to 20{degrees} API gravity) production in California has increased from 20% of the state's total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation's energy production and refining capability. California is the recipient and refines most of Alaska's 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources.

  13. Trends in heavy oil production and refining in California

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10{degrees} to 20{degrees} API gravity) production in California has increased from 20% of the state`s total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation`s energy production and refining capability. California is the recipient and refines most of Alaska`s 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources.

  14. Process for making a cesiated diamond film field emitter and field emitter formed therefrom

    DOE Patents [OSTI]

    Anderson, David F. (Batavia, IL); Kwan, Simon W. (Geneva, IL)

    1999-01-01

    A process for making a cesiated diamond film comprises (a) depositing a quantity of cesium iodide on the diamond film in a vacuum of between about 10.sup.-4 Torr and about 10.sup.-7 Torr, (b) increasing the vacuum to at least about 10.sup.-8 Torr, and (c) imposing an electron beam upon the diamond film, said electron beam having an energy sufficient to dissociate said cesium iodide and to incorporate cesium into interstices of the diamond film. The cesiated diamond film prepared according to the process has an operating voltage that is reduced by a factor of at least approximately 2.5 relative to conventional, non-cesiated diamond film field emitters.

  15. Process for making a cesiated diamond film field emitter and field emitter formed therefrom

    DOE Patents [OSTI]

    Anderson, D.F.; Kwan, S.W.

    1999-03-30

    A process for making a cesiated diamond film comprises (a) depositing a quantity of cesium iodide on the diamond film in a vacuum of between about 10{sup {minus}4} Torr and about 10{sup {minus}7} Torr, (b) increasing the vacuum to at least about 10{sup {minus}8} Torr, and (c) imposing an electron beam upon the diamond film, said electron beam having an energy sufficient to dissociate said cesium iodide and to incorporate cesium into interstices of the diamond film. The cesiated diamond film prepared according to the process has an operating voltage that is reduced by a factor of at least approximately 2.5 relative to conventional, non-cesiated diamond film field emitters. 2 figs.

  16. Superconducting single photon detectors integrated with diamond nanophotonic circuits

    E-Print Network [OSTI]

    Rath, Patrik; Ferrari, Simone; Sproll, Fabian; Lewes-Malandrakis, Georgia; Brink, Dietmar; Ilin, Konstantin; Siegel, Michael; Nebel, Christoph; Pernice, Wolfram

    2015-01-01

    Photonic quantum technologies promise to repeat the success of integrated nanophotonic circuits in non-classical applications. Using linear optical elements, quantum optical computations can be performed with integrated optical circuits and thus allow for overcoming existing limitations in terms of scalability. Besides passive optical devices for realizing photonic quantum gates, active elements such as single photon sources and single photon detectors are essential ingredients for future optical quantum circuits. Material systems which allow for the monolithic integration of all components are particularly attractive, including III-V semiconductors, silicon and also diamond. Here we demonstrate nanophotonic integrated circuits made from high quality polycrystalline diamond thin films in combination with on-chip single photon detectors. Using superconducting nanowires coupled evanescently to travelling waves we achieve high detection efficiencies up to 66 % combined with low dark count rates and timing resolu...

  17. Method for producing fluorinated diamond-like carbon films

    DOE Patents [OSTI]

    Hakovirta, Marko J.; Nastasi, Michael A.; Lee, Deok-Hyung; He, Xiao-Ming

    2003-06-03

    Fluorinated, diamond-like carbon (F-DLC) films are produced by a pulsed, glow-discharge plasma immersion ion processing procedure. The pulsed, glow-discharge plasma was generated at a pressure of 1 Pa from an acetylene (C.sub.2 H.sub.2) and hexafluoroethane (C.sub.2 F.sub.6) gas mixture, and the fluorinated, diamond-like carbon films were deposited on silicon <100>substrates. The film hardness and wear resistance were found to be strongly dependent on the fluorine content incorporated into the coatings. The hardness of the F-DLC films was found to decrease considerably when the fluorine content in the coatings reached about 20%. The contact angle of water on the F-DLC coatings was found to increase with increasing film fluorine content and to saturate at a level characteristic of polytetrafluoroethylene.

  18. Diamond neutral particle spectrometer for fusion reactor ITER

    SciTech Connect (OSTI)

    Krasilnikov, V.; Amosov, V.; Kaschuck, Yu.; Skopintsev, D. [Institution PROJECT CENTER ITER, 1, Akademik Kurchatov Sq., Moscow (Russian Federation)

    2014-08-21

    A compact diamond neutral particle spectrometer with digital signal processing has been developed for fast charge-exchange atoms and neutrons measurements at ITER fusion reactor conditions. This spectrometer will play supplementary role for Neutral Particle Analyzer providing 10 ms time and 30 keV energy resolutions for fast particle spectra in non-tritium ITER phase. These data will also be implemented for independent studies of fast ions distribution function evolution in various plasma scenarios with the formation of a single fraction of high-energy ions. In tritium ITER phase the DNPS will measure 14 MeV neutrons spectra. The spectrometer with digital signal processing can operate at peak counting rates reaching a value of 10{sup 6} cps. Diamond neutral particle spectrometer is applicable to future fusion reactors due to its high radiation hardness, fast response and high energy resolution.

  19. Zr/oxidized diamond interface for high power Schottky diodes

    SciTech Connect (OSTI)

    Traoré, A., E-mail: aboulaye.traore@neel.cnrs.fr; Muret, P.; Fiori, A.; Eon, D.; Gheeraert, E. [Univ. Grenoble Alpes, Inst NEEL, F-38042 Grenoble (France); CNRS, Inst NEEL, F-38042 Grenoble (France); Pernot, J., E-mail: julien.pernot@neel.cnrs.fr [Univ. Grenoble Alpes, Inst NEEL, F-38042 Grenoble (France); CNRS, Inst NEEL, F-38042 Grenoble (France); Institut Universitaire de France, 103 Boulevard Saint-Michel, F-75005 Paris (France)

    2014-02-03

    High forward current density of 10{sup 3} A/cm{sup 2} (at 6 V) and a breakdown field larger than 7.7 MV/cm for diamond diodes with a pseudo-vertical architecture, are demonstrated. The power figure of merit is above 244 MW/cm{sup 2} and the relative standard deviation of the reverse current density over 83 diodes is 10% with a mean value of 10{sup ?9} A/cm{sup 2}. These results are obtained with zirconium as Schottky contacts on the oxygenated (100) oriented surface of a stack comprising an optimized lightly boron doped diamond layer on a heavily boron doped one, epitaxially grown on a Ib substrate. The origin of such performances are discussed.

  20. High-Current Cold Cathode Employing Diamond and Related Materials

    SciTech Connect (OSTI)

    Hirshfield, Jay L.

    2014-10-22

    The essence of this project was for diamond films to be deposited on cold cathodes to improve their emission properties. Films with varying morphology, composition, and size of the crystals were deposited and the emission properties of the cathodes that utilize such films were studied. The prototype cathodes fabricated by the methods developed during Phase I were tested and evaluated in an actual high-power RF device during Phase II. These high-power tests used the novel active RF pulse compression system and the X-band magnicon test facility at US Naval Research Laboratory. In earlier tests, plasma switches were employed, while tests under this project utilized electron-beam switching. The intense electron beams required in the switches were supplied from cold cathodes embodying diamond films with varying morphology, including uncoated molybdenum cathodes in the preliminary tests. Tests with uncoated molybdenum cathodes produced compressed X-band RF pulses with a peak power of 91 MW, and a maximum power gain of 16.5:1. Tests were also carried out with switches employing diamond coated cathodes. The pulse compressor was based on use of switches employing electron beam triggering to effect mode conversion. In experimental tests, the compressor produced 165 MW in a ~ 20 ns pulse at ~18× power gain and ~ 140 MW at ~ 16× power gain in a 16 ns pulse with a ~ 7 ns flat-top. In these tests, molybdenum blade cathodes with thin diamond coatings demonstrated good reproducible emission uniformity with a 100 kV, 100 ns high voltage pulse. The new compressor does not have the limitations of earlier types of active pulse compressors and can operate at significantly higher electric fields without breakdown.

  1. Possible Diamond-Like Nanoscale Structures Induced by Slow Highly-Charged Ions on Graphite (HOPG)

    E-Print Network [OSTI]

    Sideras-Haddad, E.

    2009-01-01

    diamond-like structures (nanodiamond) observed using Ramandefect centres 21 in a nanodiamond matrix. II. Experimentallike structures (nanodiamond). Here the surface treatment

  2. Interval methods for computing various refinements of Nash equilibria

    E-Print Network [OSTI]

    Sainudiin, Raazesh

    Interval methods for computing various refinements of Nash equilibria Bartlomiej Jacek Kubica, assumptions on their knowledge, ... Concepts: Dominant strategy equilibrium. The Nash equilibrium. The core of a game (for cooperative games). ... #12;Nash equilibrium Let the game (X1 ,...,Xn ;q1 ,...,qn

  3. UNIVERSITY OF CALGARY Refined Freeman-Durden for Harvest Detection

    E-Print Network [OSTI]

    Calgary, University of

    detection in rice paddy fields. However, harvest detection for other crops without a smooth underlying water#12;UNIVERSITY OF CALGARY Refined Freeman-Durden for Harvest Detection using PolSAR data by Sina is one of the main challenges of the current century. Harvest detection, as an input for decision making

  4. Refinement of Hybrid Systems from Formal Models to Design Languages

    E-Print Network [OSTI]

    Cengarle, María Victoria

    of high-level design of a control system, it is highly desirable to use representations that accuratelyRefinement of Hybrid Systems from Formal Models to Design Languages Jan Romberg Systems & Software Abstract System-level design for discrete-continuous embedded systems is a complex and error- prone task

  5. routing, Internet, BGP Internet Expansion, Refinement and Churn

    E-Print Network [OSTI]

    California at San Diego, University of

    routing, Internet, BGP Internet Expansion, Refinement and Churn ANDRE BROIDO, EVI NEMETH, KC CLAFFY measures reflect contributions of opposite sign, and that true measure of variation, or churn, is the sum a standalone prefix to a root prefix) are instances of routing system churn. One advantage of using our notion

  6. routing, Internet, BGP Internet Expansion, Refinement and Churn

    E-Print Network [OSTI]

    California at San Diego, University of

    routing, Internet, BGP Internet Expansion, Refinement and Churn ANDRE BROIDO, EVI NEMETH, KC CLAFFY contributions of opposite sign, and that true measure of variation, or churn, is the sum of their absolute a standalone prefix to a root prefix) are instances of routing system churn. One advantage of using our notion

  7. Department of Computing Stepwise Refinement in Event-B||CSP

    E-Print Network [OSTI]

    Doran, Simon J.

    in Event-B||CSP Part 1: Safety Steve Schneider, Helen Treharne and Heike Wehrheim March 12th 2011 #12;Stepwise Refinement in Event-B CSP Part 1: Safety Steve Schneider1 Helen Treharne1 Heike Wehrheim2 1, 2011 Contents 1 Introduction 3 2 CSP 3 2.1 Notation

  8. TOPICAL PAPER Potential Synergies and Challenges in Refining Cellulosic Biomass

    E-Print Network [OSTI]

    California at Riverside, University of

    TOPICAL PAPER Potential Synergies and Challenges in Refining Cellulosic Biomass to Fuels, Chemicals Hampshire 03755 Lignocellulosic biomass such as agricultural and forestry residues and dedicated crops that outweigh increased biomass transport costs for facilities processing less than about 10,000 dry tons per

  9. Amorphous Diamond Flat Panel Displays - Final Report of ER-LTR CRADA project with SI Diamond Technology

    SciTech Connect (OSTI)

    Ager III, Joel W.

    1998-05-08

    The objective of this project was to determine why diamond-based films are unusually efficient electron emitters (field emission cathodes) at room temperature. Efficient cathodes based on diamond are being developed by SI Diamond Technology (SIDT) as components for bright, sunlight-readable, flat panel displays. When the project started, it was known that only a small fraction (<1%) of the cathode area is active in electron emission and that the emission sites themselves are sub-micron in size. The critical challenge of this project was to develop new microcharacterization methods capable of examining known emission sites. The research team used a combination of cathode emission imaging (developed at SIDT), micro-Raman spectroscopy (LBNL), and electron microscopy and spectroscopy (National Center for Electron Microscopy, LBNL) to examine the properties of known emission sites. The most significant accomplishment of the project was the development at LBNL of a very high resolution scanning probe that, for the first time, measured simultaneously the topography and electrical characteristics of single emission sites. The increased understanding of the emission mechanism helped SIDT to develop a new cathode material,''nano-diamond,'' which they have incorporated into their Field Emission Picture Element (FEPix) product. SIDT is developing large-format flat panel displays based on these picture elements that will be brighter and more efficient than existing outdoor displays such as Jumbotrons. The energy saving that will be realized if field emission displays are introduced commercially is in line with the energy conservation mission of DOE. The unique characterization tools developed in this project (particularly the new scanning microscopy method) are being used in ongoing BES-funded basic research.

  10. Plasma-activated direct bonding of diamond-on-insulator wafers to thermal oxide grown silicon wafers

    E-Print Network [OSTI]

    Akin, Tayfun

    Plasma-activated direct bonding of diamond-on-insulator wafers to thermal oxide grown silicon microscopy, profilometer and wafer bow measurements. Plasma-activated direct bonding of DOI wafers to thermal September 2010 Keywords: Diamond-on-insulator Plasma activation Ultrananocrystalline diamond Direct bonding

  11. University of Alberta opens new diamond lab Updated: November 27, 2013 | 7:58 pm | By Ryan Tumilty Metro Edmonton

    E-Print Network [OSTI]

    Machel, Hans

    University of Alberta opens new diamond lab Updated: November 27, 2013 | 7:58 pm | By Ryan Tumilty Siemens) If diamonds truly are a girl's best friend than a new lab at the University of Alberta could." Source: http://metronews.ca/news/edmonton/868068/university-of-alberta-opens-new-diamond-lab/ #12;

  12. Method of bonding diamonds in a matrix and articles thus produced

    DOE Patents [OSTI]

    Taylor, G.W.

    1981-01-27

    By fluorinating diamond grit, the grit may be readily bonded into a fluorocarbon resin matrix. The matrix is formed by simple hot pressing techniques. Diamond grinding wheels may advantageously be manufactured using such a matrix. Teflon fluorocarbon resins are particularly well suited for using in forming the matrix.

  13. Atmospheric plasma deposition of diamond-like carbon coatings Angela M. Ladwig a,b,

    E-Print Network [OSTI]

    Hicks, Robert F.

    include ion beam deposition, cathodic arc spray, pulsed laser ablation, argon ion sputtering, and plasmaAtmospheric plasma deposition of diamond-like carbon coatings Angela M. Ladwig a,b, , Ronald D Available online xxxx Keywords: Atmospheric pressure plasma Diamond-like carbon deposition DLC PECVD

  14. Thermal conductivity changes upon neutron transmutation of {sup 10}B doped diamond

    SciTech Connect (OSTI)

    Jagannadham, K., E-mail: jag-kasichainula@ncsu.edu [Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Verghese, K. [Nuclear Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Butler, J. E. [Code 6174, Naval research Laboratory, Washington, District of Columbia 20375 (United States)

    2014-08-28

    {sup 10}B doped p-type diamond samples were subjected to neutron transmutation reaction using thermal neutron flux of 0.9 × 10{sup 13} cm{sup ?2} s{sup ?1} and fast neutron flux of 0.09 × 10{sup 13} cm{sup ?2} s{sup ?1}. Another sample of epilayer grown on type IIa (110) single crystal diamond substrate was subjected to equal thermal and fast neutron flux of 10{sup 14}?cm{sup ?2} s{sup ?1}. The defects in the diamond samples were previously characterized by different methods. In the present work, thermal conductivity of these diamond samples was determined at room temperature by transient thermoreflectance method. The thermal conductivity change in the samples as a function of neutron fluence is explained by the phonon scattering from the point defects and disordered regions. The thermal conductivity of the diamond samples decreased more rapidly initially and less rapidly for larger neutron fluence. In addition, the thermal conductivity in type IIb diamond decreased less rapidly with thermal neutron fluence compared to the decrease in type IIa diamond subjected to fast neutron fluence. It is concluded that the rate of production of defects during transmutation reaction is slower when thermal neutrons are used. The thermal conductivity of epilayer of diamond subjected to high thermal and fast neutron fluence is associated with the covalent carbon network in the composite structure consisting of disordered carbon and sp{sup 2} bonded nanocrystalline regions.

  15. Fabrication of adherent porous diamond films on sintered WC-13 wt.%Co

    E-Print Network [OSTI]

    Bristol, University of

    biocompatibility, make it a very attractive material for a wide spectrum of applications in the fields of cutting tools, optical and electronic devices, etc. [1, 2]. Porous diamond (PD) films have received much recent substrates that had themselves been pre- coated with a thin WC-Co interlayer [13, 14]. Successful diamond

  16. Standards Panel: 1. Stephen Diamond, General Manager, Industry Standards Office and Global Standards Officer, EMC

    E-Print Network [OSTI]

    Standards Panel: 1. Stephen Diamond, General Manager, Industry Standards Office and Global was President of the IEEE Computer Society. Steve is General Manager of the Industry Standards Office at EMC Standards Officer, EMC Corporation, Office of the CTO Steve Diamond has 30 years of management, marketing

  17. RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company...

    Energy Savers [EERE]

    RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc.Commonwealth of Puerto Rico RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc....

  18. Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems

    E-Print Network [OSTI]

    : Formal Verification, Abstraction, Model Checking, Hybrid Systems, Refinement, Counterexamples #12Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems Edmund Clarke a counterexample generated by the model checker. For hybrid systems, analysis of the counterexample requires

  19. New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants January 31, 2012 - 2:09pm Addthis The...

  20. Development of miscella refining process for cottonseed oil-isopropyl alcohol system: laboratory-scale evaluations 

    E-Print Network [OSTI]

    Chau, Chi-Fai

    1994-01-01

    A technologically feasible cottonseed oil-isopropyl alcohol (IPA) miscella refining process was developed to produce high quality cottonseed oil. Individual steps necessary to refine cottonseed oil-IPA miscella were determined and improved...

  1. Vacuum encapsulated hermetically sealed diamond amplified cathode capsule and method for making same

    DOE Patents [OSTI]

    Rao, Triveni; Walsh, John; Gangone, Elizabeth

    2014-12-30

    A vacuum encapsulated, hermetically sealed cathode capsule for generating an electron beam of secondary electrons, which generally includes a cathode element having a primary emission surface adapted to emit primary electrons, an annular insulating spacer, a diamond window element comprising a diamond material and having a secondary emission surface adapted to emit secondary electrons in response to primary electrons impinging on the diamond window element, a first cold-weld ring disposed between the cathode element and the annular insulating spacer and a second cold-weld ring disposed between the annular insulating spacer and the diamond window element. The cathode capsule is formed by a vacuum cold-weld process such that the first cold-weld ring forms a hermetical seal between the cathode element and the annular insulating spacer and the second cold-weld ring forms a hermetical seal between the annular spacer and the diamond window element whereby a vacuum encapsulated chamber is formed within the capsule.

  2. Vacuum encapsulated, high temperature diamond amplified cathode capsule and method for making same

    DOE Patents [OSTI]

    Rao, Triveni; Walsh, John; Gangone, Elizabeth

    2015-12-29

    A vacuum encapsulated, hermetically sealed cathode capsule for generating an electron beam of secondary electrons, which generally includes a cathode element having a primary emission surface adapted to emit primary electrons, an annular insulating spacer, a diamond window element comprising a diamond material and having a secondary emission surface adapted to emit secondary electrons in response to primary electrons impinging on the diamond window element, a first high-temperature solder weld disposed between the diamond window element and the annular insulating spacer and a second high-temperature solder weld disposed between the annular insulating spacer and the cathode element. The cathode capsule is formed by a high temperature weld process under vacuum such that the first solder weld forms a hermetical seal between the diamond window element and the annular insulating spacer and the second solder weld forms a hermetical seal between the annular spacer and the cathode element whereby a vacuum encapsulated chamber is formed within the capsule.

  3. Evidence of OPEC pricing power: raw materials or refined products

    SciTech Connect (OSTI)

    Not Available

    1988-09-30

    For eight years, US petroleum and consumer sectors have argued for or against a free-market policy where international trade is concerned. Briefly, between 1982 and 1985, the argument against importation of refined products was almost as heated as the argument against importation of crude. But since the 1986 crude oil price crash, much has changed. Some contemporary thinking is that as long as the US can count on low crude prices, the benefits will outweigh the detriment to the US crude producing sector. This issue also contains the following: (1) ED refining netback data series for the US Gulf and West Coasts, Rotterdam, and Singapore for late September 1988; and (2) ED fuel price/tax series for countries of the Eastern Hemisphere, September 1988 edition. 8 figures, 5 tables.

  4. Canadian refiner finds simple route to reformulated gasoline production

    SciTech Connect (OSTI)

    Walsh, B. [North Atlantic Refining Ltd., Come By Chance, Newfoundland (Canada); McDonald, G.W.G. [IONA Ltd., Sarasota, FL (United States); Perkins, J.D. [United Catalysts Inc., Louisville, KY (United States)

    1997-03-17

    North Atlantic Refining Ltd. (NARL) operates a 105,000 b/sd hydrocracking refinery at Come By Chance, Newfoundland. NARL sells gasoline into markets in Newfoundland and the northeastern US. When the US Environmental Protection Agency instituted reformulated gasoline (RFG) requirements as part of the Clean Air Act amendments of 1990, NARL had to find a way to meet the specifications, even though the refinery is not within US territory. The refiner chose to add a small hydrogenation unit to treat the portion of the reformate stream containing benzene precursors. Since start-up of the unit in late 1995, it has achieved 100% benzene hydrogenation, thus allowing NARL to easily produce RFG containing less than 1.0 vol% benzene. The paper discusses procurement, hydrogen supply, catalyst, special features, start-up, operations, and process control.

  5. REFINING AND END USE STUDY OF COAL LIQUIDS

    SciTech Connect (OSTI)

    Unknown

    2002-01-01

    This document summarizes all of the work conducted as part of the Refining and End Use Study of Coal Liquids. There were several distinct objectives set, as the study developed over time: (1) Demonstration of a Refinery Accepting Coal Liquids; (2) Emissions Screening of Indirect Diesel; (3) Biomass Gasification F-T Modeling; and (4) Updated Gas to Liquids (GTL) Baseline Design/Economic Study.

  6. Off-balance-sheet financing to the refining industry

    SciTech Connect (OSTI)

    Jenkins, J.H. [Pace Consultants Inc., Houston, TX (United States)

    1995-09-01

    Off-balance-sheet lending, or project finance, is becoming an increasingly popular means of capital formation in the refining and petrochemical industries. However, these transactions are substantially different from traditional corporate lending, and the demands placed on the borrower to examine, substantiate, and support the project are far greater. The following paper examines ways in which international banks and other lenders evaluate off-balance-sheet refinery projects and suggests ways to better structure financial representations.

  7. Refining Bio-Oil alongside Petroleum | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report Appendices |ProjectKnowRedox Shuttle Additive, WinsRefining

  8. Emergent Properties Do Not Refine Fiona Polack, Susan Stepney1,2

    E-Print Network [OSTI]

    Stepney, Susan

    Emergent Properties Do Not Refine Fiona Polack, Susan Stepney1,2 Department of Computer Science a demonstrably-correct development from an abstract specification. Emergent systems present an interesting to the traditional model of refinement. Keywords: Emergence, Refinement, Systems Engineering. 1 Introduction Our

  9. Refinement and verification of concurrent systems specified in ObjectZ and CSP

    E-Print Network [OSTI]

    Smith, Graeme

    Refinement and verification of concurrent systems specified in Object­Z and CSP Graeme Smith­Z and CSP. A common semantic basis for the two languages enables a unified method of refinement to be used, based upon CSP refinement. To enable state­based techniques to be used for the Object­Z components

  10. Lattice refining loop quantum cosmology, anisotropic models, and stability

    SciTech Connect (OSTI)

    Bojowald, Martin; Cartin, Daniel; Khanna, Gaurav [Institute for Gravitation and the Cosmos, Pennsylvania State University, 104 Davey Lab, University Park, Pennsylvania 16802 (United States); Naval Academy Preparatory School, 197 Elliot Street, Newport, Rhode Island 02841 (United States); Physics Department, University of Massachusetts at Dartmouth, North Dartmouth, Massachusetts 02747 (United States)

    2007-09-15

    A general class of loop quantizations for anisotropic models is introduced and discussed, which enhances loop quantum cosmology by relevant features seen in inhomogeneous situations. The main new effect is an underlying lattice which is being refined during dynamical changes of the volume. In general, this leads to a new feature of dynamical difference equations which may not have constant step-size, posing new mathematical problems. It is discussed how such models can be evaluated and what lattice refinements imply for semiclassical behavior. Two detailed examples illustrate that stability conditions can put strong constraints on suitable refinement models, even in the absence of a fundamental Hamiltonian which defines changes of the underlying lattice. Thus, a large class of consistency tests of loop quantum gravity becomes available. In this context, it will also be seen that quantum corrections due to inverse powers of metric components in a constraint are much larger than they appeared recently in more special treatments of isotropic, free scalar models where they were artificially suppressed.

  11. Parallel Block Structured Adaptive Mesh Refinement on Graphics Processing Units

    SciTech Connect (OSTI)

    Beckingsale, D. A. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom); Gaudin, W. P. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom); Hornung, R. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gunney, B. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gamblin, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Herdman, J. A. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom); Jarvis, S. A. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom)

    2014-11-17

    Block-structured adaptive mesh refinement is a technique that can be used when solving partial differential equations to reduce the number of zones necessary to achieve the required accuracy in areas of interest. These areas (shock fronts, material interfaces, etc.) are recursively covered with finer mesh patches that are grouped into a hierarchy of refinement levels. Despite the potential for large savings in computational requirements and memory usage without a corresponding reduction in accuracy, AMR adds overhead in managing the mesh hierarchy, adding complex communication and data movement requirements to a simulation. In this paper, we describe the design and implementation of a native GPU-based AMR library, including: the classes used to manage data on a mesh patch, the routines used for transferring data between GPUs on different nodes, and the data-parallel operators developed to coarsen and refine mesh data. We validate the performance and accuracy of our implementation using three test problems and two architectures: an eight-node cluster, and over four thousand nodes of Oak Ridge National Laboratory’s Titan supercomputer. Our GPU-based AMR hydrodynamics code performs up to 4.87× faster than the CPU-based implementation, and has been scaled to over four thousand GPUs using a combination of MPI and CUDA.

  12. Engineering shallow spins in diamond with nitrogen delta-doping

    SciTech Connect (OSTI)

    Ohno, Kenichi; Joseph Heremans, F.; Bassett, Lee C.; Myers, Bryan A.; Toyli, David M.; Bleszynski Jayich, Ania C.; Palmstrom, Christopher J.; Awschalom, David D.

    2012-08-20

    We demonstrate nanometer-precision depth control of nitrogen-vacancy (NV) center creation near the surface of synthetic diamond using an in situ nitrogen delta-doping technique during plasma-enhanced chemical vapor deposition. Despite their proximity to the surface, doped NV centers with depths (d) ranging from 5 to 100 nm display long spin coherence times, T{sub 2} > 100 {mu}s at d = 5 nm and T{sub 2} > 600 {mu}s at d {>=} 50 nm. The consistently long spin coherence observed in such shallow NV centers enables applications such as atomic-scale external spin sensing and hybrid quantum architectures.

  13. Alignment of the diamond nitrogen vacancy center by strain engineering

    SciTech Connect (OSTI)

    Karin, Todd [Department of Physics, University of Washington, Seattle, Washington 98195 (United States); Dunham, Scott [Department of Electrical Engineering, University of Washington, Seattle, Washington 98195 (United States); Fu, Kai-Mei [Department of Physics, University of Washington, Seattle, Washington 98195 (United States); Department of Electrical Engineering, University of Washington, Seattle, Washington 98195 (United States)

    2014-08-04

    The nitrogen vacancy (NV) center in diamond is a sensitive probe of magnetic field and a promising qubit candidate for quantum information processing. The performance of many NV-based devices improves by aligning the NV(s) parallel to a single crystallographic direction. Using ab initio theoretical techniques, we show that NV orientation can be controlled by high-temperature annealing in the presence of strain under currently accessible experimental conditions. We find that (89?±?7)% of NVs align along the [111] crystallographic direction under 2% compressive biaxial strain (perpendicular to [111]) and an annealing temperature of 970?°C.

  14. Charging characteritiscs of ultrananocrystalline diamond in RF MEMS capacitive switches.

    SciTech Connect (OSTI)

    Sumant, A. V.; Goldsmith, C.; Auciello, O.; Carlisle, J.; Zheng, H.; Hwang, J. C. M.; Palego, C.; Wang, W.; Carpick, R.; Adiga, V.; Datta, A.; Gudeman, C.; O'Brien, S.; Sampath, S.

    2010-05-01

    Modifications to a standard capacitive MEMS switch process have been made to allow the incorporation of ultra-nano-crystalline diamond as the switch dielectric. The impact on electromechanical performance is minimal. However, these devices exhibit uniquely different charging characteristics, with charging and discharging time constants 5-6 orders of magnitude quicker than conventional materials. This operation opens the possibility of devices which have no adverse effects of dielectric charging and can be operated near-continuously in the actuated state without significant degradation in reliability.

  15. Method and apparatus for making diamond-like carbon films

    DOE Patents [OSTI]

    Pern, Fu-Jann (Golden, CO); Touryan, Kenell J. (Indian Hills, CO); Panosyan, Zhozef Retevos (Yerevan, AM); Gippius, Aleksey Alekseyevich (Moscow, RU)

    2008-12-02

    Ion-assisted plasma enhanced deposition of diamond-like carbon (DLC) films on the surface of photovoltaic solar cells is accomplished with a method and apparatus for controlling ion energy. The quality of DLC layers is fine-tuned by a properly biased system of special electrodes and by exact control of the feed gas mixture compositions. Uniform (with degree of non-uniformity of optical parameters less than 5%) large area (more than 110 cm.sup.2) DLC films with optical parameters varied within the given range and with stability against harmful effects of the environment are achieved.

  16. Blue Diamond, Nevada: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowaWisconsin:Pontiac Biomass Facility JumpIICalifornia: EnergyC LtdDiamond,

  17. Sandia Energy - Diamond Plates Create Nanostructures through Pressure,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) byMultidayAlumniProjectsCyberNot Chemistry Diamond Plates Create

  18. JOURNAL OF MATERIALS SCIENCE LETTERS, 14 (1995) 1448-1450 A technique for the manufacture of long hollow diamond fibres by

    E-Print Network [OSTI]

    Bristol, University of

    1995-01-01

    substrates, which has limited CVD diamond applications to optical or wear resistant coatings and cutting tools [4]. Recently, continuous CVD diamond fibres have been produced by coating CVD diamond onto wires diamond coated shape obtained depends on the dimensions of the coil (Fig. 2a). A continuous solid fibre

  19. Nanofabrication of sharp diamond tips by e-beam lithography and inductively coupled plasma reactive ion etching.

    SciTech Connect (OSTI)

    Moldovan, N.; Divan, R.; Zeng, H.; Carlisle, J. A.; Advanced Diamond Tech.

    2009-12-07

    Ultrasharp diamond tips make excellent atomic force microscopy probes, field emitters, and abrasive articles due to diamond's outstanding physical properties, i.e., hardness, low friction coefficient, low work function, and toughness. Sharp diamond tips are currently fabricated as individual tips or arrays by three principal methods: (1) focused ion beam milling and gluing onto a cantilever of individual diamond tips, (2) coating silicon tips with diamond films, or (3) molding diamond into grooves etched in a sacrificial substrate, bonding the sacrificial substrate to another substrate or electrodepositing of a handling chip, followed by dissolution of the sacrificial substrate. The first method is tedious and serial in nature but does produce very sharp tips, the second method results in tips whose radius is limited by the thickness of the diamond coating, while the third method involves a costly bonding and release process and difficulties in thoroughly filling the high aspect ratio apex of molding grooves with diamond at the nanoscale. To overcome the difficulties with these existing methods, this article reports on the feasibility of the fabrication of sharp diamond tips by direct etching of ultrananocrystalline diamond (UNCD{reg_sign}) as a starting and structural material. The UNCD is reactive ion etched using a cap-precursor-mask scheme. An optimized etching recipe demonstrates the formation of ultrasharp diamond tips ({approx} 10 nm tip radius) with etch rates of 650 nm/min.

  20. Ultrananocrystalline and nanocrystalline diamond thin films for NEMS/MEMS applications.

    SciTech Connect (OSTI)

    Sumant, A. V.; Auciello, O.; Carpick, R. W.; Srinivasan, S.; Butler, J. E. (Center for Nanoscale Materials); ( MSD); ( PSC-USR)

    2010-04-01

    There has been a tireless quest by the designers of micro- and nanoelectro mechanical systems (MEMS/NEMS) to find a suitable material alternative to conventional silicon. This is needed to develop robust, reliable, and long-endurance MEMS/NEMS with capabilities for working under demanding conditions, including harsh environments, high stresses, or with contacting and sliding surfaces. Diamond is one of the most promising candidates for this because of its superior physical, chemical, and tribomechanical properties. Ultrananocrystalline diamond (UNCD) and nanocrystalline diamond (NCD) thin films, the two most studied forms of diamond films in the last decade, have distinct growth processes and nanostructures but complementary properties. This article reviews the fundamental and applied science performed to understand key aspects of UNCD and NCD films, including the nucleation and growth, tribomechanical properties, electronic properties, and applied studies on integration with piezoelectric materials and CMOS technology. Several emerging diamond-based MEMS/NEMS applications, including high-frequency resonators, radio frequency MEMS and photonic switches, and the first commercial diamond MEMS product - monolithic diamond atomic force microscopy probes - are discussed.

  1. Diamondization of Graphene and Graphene-BN Bilayers: Chemical Functionalization and Electronic Structure Engineering

    E-Print Network [OSTI]

    Yuan, Long; Yang, Jinlong; Hou, Jian Guo

    2011-01-01

    In this article, based on first-principles calculations, we systematically study functionalization induced diamonization of graphene bilayer and graphene-BN hybrid bilayer. With single-side functionalization, the diamondized structures are magnetic semiconductor. Interestingly, if both sides of the bilayer are functionalized, diamondization becomes spontaneous without a barrier. On the other hand, when the bottom layer of the bilayer graphene is replaced by a single hexagonal BN layer, the diamondized structure becomes nonmagnetic metal. The tunable electronic and magnetic properties pave new avenues to construct graphene-based electronics and spintronics devices.

  2. Adhesion of diamond coatings synthesized by oxygen-acetylene flame CVD on tungsten carbide

    SciTech Connect (OSTI)

    Marinkovic, S.; Stankovic, S.; Dekanski, A.

    1995-12-31

    The results of a study concerned with chemical vapor deposition of diamond on tungsten carbide cutting tools using an oxygen-acetylene flame in a normal ambient environment are presented. Effects of preparation conditions on the adhesion of the coating have been investigated, including different surface treatment, different position of the flame with respect to the coated surface, effect of an intermediate poorly crystalline diamond layer, etc. In particular, effect of polishing and ultrasonic lapping with diamond powder was compared with that of a corresponding treatment with SiC powder.

  3. ,"Weekly Refiner Net Production"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S.longecReformulated GasolineSalesBlender NetRefiner

  4. Changing Trends in the Refining Industry (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01

    There have been some major changes in the U.S. refining industry recently, prompted in part by a significant decline in the quality of imported crude oil and by increasing restrictions on the quality of finished products. As a result, high-quality crudes, such as the West Texas Intermediate (WTI) crude that serves as a benchmark for oil futures on the New York Mercantile Exchange (NYMEX), have been trading at record premiums to the OPEC (Organization of the Petroleum Exporting Countries) Basket price.

  5. Cogeneration handbook for the petroleum refining industry. [Contains glossary

    SciTech Connect (OSTI)

    Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Fassbender, A.G.; Eakin, D.E.; Gorges, H.A.

    1984-03-01

    The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the petroleum refining industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  6. Bandwidth Study U.S. Petroleum Refining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels Researchof Energy and Forest ServicePower andPetroleum Refining

  7. Midcourse Refinements of Financing Strategies | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOE SafetyofDepartment. "National Midcourse Refinements of

  8. Genealogy of major U.S. refiners - Energy Information Administration

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets See full Genealogy of Major U.S. Refiners

  9. Measurements and Studies of Secondary Electron Emission of Diamond Amplified Photocathode

    SciTech Connect (OSTI)

    Wu,Q.

    2008-10-01

    The Diamond Amplified Photocathode (DAP) is a novel approach to generating electrons. By following the primary electron beam, which is generated by traditional electron sources, with an amplifier, the electron beam available to the eventual application is increased by 1 to 2 orders of magnitude in current. Diamond has a very wide band gap of 5.47eV which allows for a good negative electron affinity with simple hydrogenation, diamond can hold more than 2000MV/m field before breakdown. Diamond also provides the best rigidity among all materials. These two characters offer the capability of applying high voltage across very thin diamond film to achieve high SEY and desired emission phase. The diamond amplifier also is capable of handling a large heat load by conduction and sub-nanosecond pulse input. The preparation of the diamond amplifier includes thinning and polishing, cleaning with acid etching, metallization, and hydrogenation. The best mechanical polishing available can provide high purity single crystal diamond films with no less than 100 {micro}m thickness and <15 nm Ra surface roughness. The ideal thickness for 700MHz beam is {approx}30 {micro}m, which requires further thinning with RIE or laser ablation. RIE can achieve atomic layer removal precision and roughness eventually, but the time consumption for this procedure is very significant. Laser ablation proved that with <266nm ps laser beam, the ablation process on the diamond can easily achieve removing a few microns per hour from the surface and <100nm roughness. For amplifier application, laser ablation is an adequate and efficient process to make ultra thin diamond wafers following mechanical polishing. Hydrogenation will terminate the diamond surface with monolayer of hydrogen, and form NEA so that secondary electrons in the conduction band can escape into the vacuum. The method is using hydrogen cracker to strike hydrogen atoms onto the bare diamond surface to form H-C bonds. Two independent experiments were carried out to determine the transport of the electrons within the diamond and their emission at the surface. In transmission mode measurements, the diamond amplifier was coated with metal on both sides, so results simply depend only on the electron transport within the diamond. The SEY for this mode provides one secondary electron per 20eV energy, which gives the gain of more than 200 for 4.7keV (effective energy) primary electrons under 2MV/m. Laser detrapping can help the signal maintain the gain with lops pulse and duty cycle of 1.67 x 10{sup -7}. In emission mode measurements, in which the diamond is prepared as in the actual application, the SEY is {approx}20 for 700eV (effective energy) primary electrons under 1.21MV/m. The electric field applied and the primary electron energy is limited by the experiment setup, but the results show good trend toward large gain under high field. Thermal emittance of the diamond secondary emission is critical for the beam application. A careful design is setup to measure with very fine precision and accuracy of 0.01eV.

  10. Study of narrowband single photon emitters in polycrystalline diamond films

    SciTech Connect (OSTI)

    Sandstrom, Russell G.; Shimoni, Olga; Martin, Aiden A.; Aharonovich, Igor, E-mail: igor.aharonovich@uts.edu.au [School of Physics and Advanced Materials, University of Technology, Sydney, P.O. Box 123, Broadway, New South Wales 2007 (Australia)

    2014-11-03

    Quantum information processing and integrated nanophotonics require robust generation of single photon emitters on demand. In this work, we demonstrate that diamond films grown on a silicon substrate by microwave plasma chemical vapor deposition can host bright, narrowband single photon emitters in the visible—near infra-red spectral range. The emitters possess fast lifetime (?several ns), absolute photostability, and exhibit full polarization at excitation and emission. Pulsed and continuous laser excitations confirm their quantum behaviour at room temperature, while low temperature spectroscopy is performed to investigate inhomogeneous broadening. Our results advance the knowledge of solid state single photon sources and open pathways for their practical implementation in quantum communication and quantum information processing.

  11. Optically transparent, scratch-resistant, diamond-like carbon coatings

    DOE Patents [OSTI]

    He, Xiao-Ming; Lee, Deok-Hyung; Nastasi, Michael A.; Walter, Kevin C.; Tuszewski, Michel G.

    2003-06-03

    A plasma-based method for the deposition of diamond-like carbon (DLC) coatings is described. The process uses a radio-frequency inductively coupled discharge to generate a plasma at relatively low gas pressures. The deposition process is environmentally friendly and scaleable to large areas, and components that have geometrically complicated surfaces can be processed. The method has been used to deposit adherent 100-400 nm thick DLC coatings on metals, glass, and polymers. These coatings are between three and four times harder than steel and are therefore scratch resistant, and transparent to visible light. Boron and silicon doping of the DLC coatings have produced coatings having improved optical properties and lower coating stress levels, but with slightly lower hardness.

  12. Persistence of Single Spin Coherence above 600K in Diamond

    E-Print Network [OSTI]

    Toyli, D M; Alkauskas, A; Buckley, B B; Van de Walle, C G; Awschalom, D D

    2012-01-01

    We study the spin and orbital dynamics of single nitrogen vacancy (NV) centers in diamond between room temperature and 700 K. We find that the ability to optically address and coherently control single spins above room temperature is limited by nonradiative processes that quench the NV center's fluorescence-based spin readout between 550 K and 700 K. Combined with electronic structure calculations, our measurements indicate that the energy difference between the 3E and 1A1 electronic states is approximately 0.8 eV. We also find that the inhomogeneous spin lifetime (T2*) is independent of temperature up to at least 625 K, suggesting that single NV centers could be applied as nanoscale thermometers over a broad temperature range.

  13. Polycrystalline diamond MEMS resonator technology for sensor applications.

    SciTech Connect (OSTI)

    Sullivan, John P.; Aslam, Dean (Michigan State University, East Lansing, MI); Sepulveda-Alancastro, Nelson (Michigan State University, East Lansing, MI)

    2005-07-01

    Due to material limitations of poly-Si resonators, polycrystalline diamond (poly-C) has been explored as a new MEMS resonator material. The poly-C resonators are designed, fabricated and tested using electrostatic (Michigan State University) and piezoelectric (Sandia National Laboratories) actuation methods, and the results are compared. For comparable resonator structures, although the resonance frequencies are similar, the measured Q values in the ranges of 1000-2000 and 10,000-15,000 are obtained for electrostatic and piezoelectric actuation methods, respectively. The difference in Q for the two methods is related to different pressures used during the measurement and not to the method of measurement. For the poly-C cantilever beam resonators, the highest value of their quality factor (Q) is reported for the first time (15,263).

  14. Sensitive Magnetic Control of Ensemble Nuclear Spin Hyperpolarisation in Diamond

    E-Print Network [OSTI]

    Wang, Hai-Jing; Avalos, Claudia E; Seltzer, Scott J; Budker, Dmitry; Pines, Alexander; Bajaj, Vikram S

    2012-01-01

    Dynamic nuclear polarisation, which transfers the spin polarisation of electrons to nuclei, is routinely applied to enhance the sensitivity of nuclear magnetic resonance; it is also critical in spintronics, particularly when spin hyperpolarisation can be produced and controlled optically or electrically. Here we show the complete polarisation of nuclei located near the optically-polarised nitrogen-vacancy (NV) centre in diamond. When approaching the ground-state level anti-crossing condition of the NV electron spins, 13C nuclei in the first-shell are polarised in a pattern that depends sensitively and sharply upon the magnetic field. Based on the anisotropy of the hyperfine coupling and of the optical polarisation mechanism, we predict and observe a complete reversal of the nuclear spin polarisation with a few-mT change in the magnetic field. The demonstrated sensitive magnetic control of nuclear polarisation at room temperature will be useful for sensitivity-enhanced NMR, nuclear-based spintronics, and quant...

  15. Examination of the Material Removal Rate in Lapping Polycrystalline Diamond Compacts 

    E-Print Network [OSTI]

    Sowers, Jason Michael

    2012-10-19

    This study examines the lapping machining process used during the manufacturing of polycrystalline diamond compacts (PDCs). More specifically, it is aimed at improving the productivity of the process by developing a better understanding...

  16. FURTHER NOTES ON THE NATURAL HISTORY AND ARTIFICIAL PROPAGATION OF THE DIAMOND-BACK TERRAPIN.

    E-Print Network [OSTI]

    on the artificial propagation of the diamond-back terrapin, Malaclemmys cenirata, at the United States Fisheries been directed since its beginning by several investigators. Originally Dr. R. E. Coker gave his

  17. The semi-empirical tight-binding model for carbon allotropes “between diamond and graphite”

    SciTech Connect (OSTI)

    Lytovchenko, V.; Kurchak, A.; Strikha, M.

    2014-06-28

    The new carbon allotropes “between diamond and graphite” have come under intensive examination during the last decade due to their numerous technical applications. The modification of energy gap in thin films of these allotropes was studied experimentally using optical methods. The proposed simple model of carbon clusters with variable lengths of chemical bonds allows us to imitate the transfer from diamond and diamond-like to graphite-like structures, as well as the corresponding modification of hybridization sp{sup 3}/sp{sup 2} for diamond-like and sp{sub z} for graphite-like phases. This enables us to estimate various allotropes parameters, like the gap E{sub g}, energies of valence E{sub v}, and conduction E{sub c} band edges, and the value of electronic affinity, i.e., optical work function X, which are all of practical importance. The obtained estimations correspond to the experimental data.

  18. Diamond Amplified Photocathode at BNL | U.S. DOE Office of Science...

    Office of Science (SC) Website

    The diamond amplified photocathode may improve the performance of laser-photocathode RF guns by providing a robust, high quantum-efficiency, low thermal-emittance cathode. In the...

  19. Electrochemically grafted polypyrrole changes photoluminescence of electronic states inside nanocrystalline diamond

    SciTech Connect (OSTI)

    Galá?, P. Malý, P.; ?ermák, J.; Kromka, A.; Rezek, B.

    2014-12-14

    Hybrid diamond-organic interfaces are considered attractive for diverse applications ranging from electronics and energy conversion to medicine. Here we use time-resolved and time-integrated photoluminescence spectroscopy in visible spectral range (380–700?nm) to study electronic processes in H-terminated nanocrystalline diamond films (NCD) with 150?nm thin, electrochemically deposited polypyrrole (PPy) layer. We observe changes in dynamics of NCD photoluminescence as well as in its time-integrated spectra after polymer deposition. The effect is reversible. We propose a model where the PPy layer on the NCD surface promotes spatial separation of photo-generated charge carriers both in non-diamond carbon phase and in bulk diamond. By comparing different NCD thicknesses we show that the effect goes as much as 200?nm deep inside the NCD film.

  20. Model of the competitive growth of amorphous carbon and diamond films I. J. Forda)

    E-Print Network [OSTI]

    Ford, Ian

    be deposited on a silicon wafer mounted on a rotating platform, which was exposed sequen- tially to fluxes carbon films could be deposited (for an increase in the car- bon flux) or diamond films were produced (by

  1. Evaluation of TexSIM for modeling traffic behavior at diamond interchanges 

    E-Print Network [OSTI]

    Meadors, Allison Christine Cherry

    1995-01-01

    Poor operation of diamond interchanges along a freeway corridor can decrease the mobility of the corridor and increase time and energy costs associated with delay at signalized interchanges. Computer simulation provides a safe and efficient means...

  2. Preparation of W-Ta thin-film thermocouple on diamond anvil cell...

    Office of Scientific and Technical Information (OSTI)

    Preparation of W-Ta thin-film thermocouple on diamond anvil cell for in-situ temperature measurement under high pressure Citation Details In-Document Search Title: Preparation of...

  3. Nucleation of nanocrystalline diamond by fragmentation of fullerene precursors.

    SciTech Connect (OSTI)

    Gruen, D. M.

    1998-05-04

    Growth of diamond films from C{sub 60}/Ar microwave discharges results in a nanocrystalline microstructure with crystallite sizes in the range 3-10 nm. Heterogeneous nucleation rates of 10{sup 10} cm{sup {minus}2} sec are required to account for the results. The nucleation mechanism presented here fulfills this requirement and is based on the insertion of carbon dimer, C{sub 2}, molecules, produced by fragmentation of C{sub 60}, into the n-bonded dimer rows of the reconstructed (100) surface of diamond. Density functional theory is used to calculate the energetic of C{sub 2} insertion into carbon clusters that model the (100) surface. The reaction of singlet C{sub 2} with the double bond of the C{sub 9}H{sub 12} cluster leads to either carbene structures or a cyclobutynelike structure. At the HF/6-31G* level, the carbene product has a C{sub 2v} structure, while at the B3LYP/6-31G* levels of theory, it has a C{sub s} structure with the inserted C{sub 2} tilted. No barrier for insertion into the C=C double bond of the C{sub 9}H{sub 12} cluster was found at the HF/6-31G* and B3LYP/6-31G* levels of theory. Thus, calculations including correlation energy and geometry optimization indicate that insertion of C{sub 2} into a C=C double bond leads to a large energy lowering, {approximately}120 kcal/mol for a C{sub 9}H{sub 12} cluster, and there is no barrier for insertion.

  4. Influence of Alloy and Solidification Parameters on Grain Refinement in Aluminum Weld Metal due to Inoculation

    SciTech Connect (OSTI)

    Schempp, Philipp [BAM, Germany; Tang, Z. [BIAS, Germany; Cross, Carl E. [Los Alamos National Laboratory; Seefeld, T. [BIAS, Germany; Pittner, A. [BAM, Germany; Rethmeier, M. [BAM, Germany

    2012-06-28

    The goals are: (1) Establish how much Ti/B grain refiner is need to completely refine aluminum weld metal for different alloys and different welding conditions; (2) Characterize how alloy composition and solidification parameters affect weld metal grain refinement; and (3) Apply relevant theory to understand observed behavior. Conclusions are: (1) additions of Ti/B grain refiner to weld metal in Alloys 1050, 5083, and 6082 resulted in significant grain refinement; (2) grain refinement was more effective in GTAW than LBW, resulting in finer grains at lower Ti content - reason is limited time available for equiaxed grain growth in LBW (inability to occlude columnar grain growth); (3) welding travel speed did not markedly affect grain size within GTAW and LBW clusters; and (4) application of Hunt CET analysis showed experimental G to be on the order of the critical G{sub CET}; G{sub CET} was consistently higher for GTAW than for LBW.

  5. Influence of diamond turning and surface cleaning processes on the degradation of KDP crystal surfaces

    SciTech Connect (OSTI)

    Kozlowski, M.R.; Thomas, I.; Edwards, G.; Stanion, K.; Fuchs, B.

    1991-06-24

    One factor influencing the efficiency of KDP (potassium dihydrogen phosphate) frequency conversion arrays on the Nova laser system at LLNL has been environmental degradation, or fogging'', of the crystal surfaces. Decreases in array transmission by as much as 20% have been attributed to crystal fogging. The surfaces of the 27-cm square Nova array crystals are prepared by a wet diamond-turning process. The rate of surface fogging has been associated with several parameters of the diamond turning and subsequent cleaning processes. High humidity during diamond turning, storage, and use on the laser tends to accelerate the fogging. We suspect that some of the additives present in the diamond turning oil increase the fogging rate and have found a machining oil which minimizes this surface degradation. Efficient removal of the machining oils from the crystal surface also minimizes the fogging problem. Care must be taken to use cleaning solvents which do not cause additional surface degradation. The fogging rate is sensitive to the crystallographic orientation of the material as well as to surface roughness related to the diamond turning process. Accelerated fogging at diamond turning artifacts may increase crystal surface roughness causing increased beam modulation and scattering losses. 5 refs. 5 figs.

  6. Impact of Environmental Compliance Costs on U.S. Refining Profitability 1995-2001

    Reports and Publications (EIA)

    2003-01-01

    This report assesses the effects of pollution abatement requirements on the financial performance of U.S. petroleum refining and marketing operations during the 1995 to 2001 period. This study is a follow-up to the October 1997 publication entitled The Impact of Environmental Compliance Costs on U.S. Refining Profitability, that focused on the financial impacts of U.S. refining pollution abatement investment requirements in the 1988 to1995 period.

  7. Linkages between the markets for crude oil and the markets for refined products

    SciTech Connect (OSTI)

    Didziulis, V.S.

    1990-01-01

    To understand the crude oil price determination process it is necessary to extend the analysis beyond the markets for petroleum. Crude oil prices are determined in two closely related markets: the markets for crude oil and the markets for refined products. An econometric-linear programming model was developed to capture the linkages between the markets for crude oil and refined products. In the LP refiners maximize profits given crude oil supplies, refining capacities, and prices of refined products. The objective function is profit maximization net of crude oil prices. The shadow price on crude oil gives the netback price. Refined product prices are obtained from the econometric models. The model covers the free world divided in five regions. The model is used to analyze the impacts on the markets of policies that affect crude oil supplies, the demands for refined products, and the refining industry. For each scenario analyzed the demand for crude oil is derived from the equilibrium conditions in the markets for products. The demand curve is confronted with a supply curve which maximizes revenues providing an equilibrium solution for both crude oil and product markets. The model also captures crude oil price differentials by quality. The results show that the demands for crude oil are different across regions due to the structure of the refining industries and the characteristics of the demands for refined products. Changes in the demands for products have a larger impact on the markets than changes in the refining industry. Since markets for refined products and crude oil are interrelated they can't be analyzed individually if an accurate and complete assessment of a policy is to be made. Changes in only one product market in one region affect the other product markets and the prices of crude oil.

  8. Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Information AdministrationPetroleum Marketing Annual 1998 Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales Type (Cents per Gallon Excluding Taxes) - Continued...

  9. Table 10. U.S. Refiner Oxygenated Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1999 Table 10. U.S. Refiner Oxygenated Motor Gasoline Prices by Grade and Sales Type (Cents per Gallon Excluding Taxes) Year Month...

  10. Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Information AdministrationPetroleum Marketing Annual 1999 Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales Type (Cents per Gallon Excluding Taxes) - Continued...

  11. Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Information AdministrationPetroleum Marketing Annual 1998 Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales Type (Million Gallons per Day) - Continued Year...

  12. Table 2. U.S. Refiner Prices of Petroleum Products to End Users

    U.S. Energy Information Administration (EIA) Indexed Site

    fuel. Note: Motor gasoline averages and totals prior to October 1993 include leaded gasoline. Sources: Energy Information Administration Form EIA-782A, "Refiners'Gas Plant...

  13. Counterexample-Guided Abstraction Refinement for POND Planning Jonas Thiem and Robert Mattmuller and Manuela Ortlieb

    E-Print Network [OSTI]

    Teschner, Matthias

    Counterexample-Guided Abstraction Refinement for POND Planning Jonas Thiem and Robert Mattm to define abstractions (guar- anteeing over-approximations). A straightforward way for POND planning

  14. Refining and Extending the Business Model with Information Technology: Dell Computer Corporation

    E-Print Network [OSTI]

    Kraemer, Kenneth L; Dedrick, Jason; Yamashiro, Sandra

    1999-01-01

    of Dell’s Direct Business Model Fuels Fifteenth ConsecutiveAND EXTENDING THE REFINING AND EXTENDING THE BUSINESS MODELBUSINESS MODEL CENTER FOR RESEARCH ON INFORMATION TECHNOLOGY

  15. Table A3. Refiner/Reseller Prices of Distillate and Residual...

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1999 441 Table A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present (Cents per Gallon...

  16. Table A1. Refiner/Reseller Motor Gasoline Prices by Grade, PAD...

    U.S. Energy Information Administration (EIA) Indexed Site

    Petroleum Marketing Annual 1999 401 Table A1. RefinerReseller Motor Gasoline Prices by Grade, PAD District and State, 1984-Present (Cents per Gallon Excluding Taxes) -...

  17. Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1999 421 Table A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present (Cents per...

  18. Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...

    Gasoline and Diesel Fuel Update (EIA)

    Petroleum Marketing Annual 1998 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

  19. Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...

    U.S. Energy Information Administration (EIA) Indexed Site

    Petroleum Marketing Annual 1999 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

  20. Refining and classifying finite-time Lyapunov exponent ridges

    E-Print Network [OSTI]

    Allshouse, Michael R

    2015-01-01

    While more rigorous and sophisticated methods for identifying Lagrangian based coherent structures exist, the finite-time Lyapunov exponent (FTLE) field remains a straightforward and popular method for gaining some insight into transport by complex, time-dependent two-dimensional flows. In light of its enduring appeal, and in support of good practice, we begin by investigating the effects of discretization and noise on two numerical approaches for calculating the FTLE field. A practical method to extract and refine FTLE ridges in two-dimensional flows, which builds on previous methods, is then presented. Seeking to better ascertain the role of an FTLE ridge in flow transport, we adapt an existing classification scheme and provide a thorough treatment of the challenges of classifying the types of deformation represented by an FTLE ridge. As a practical demonstration, the methods are applied to an ocean surface velocity field data set generated by a numerical model.

  1. Fuel and oxygen addition for metal smelting or refining process

    DOE Patents [OSTI]

    Schlichting, M.R.

    1994-11-22

    A furnace for smelting iron ore and/or refining molten iron is equipped with an overhead pneumatic lance, through which a center stream of particulate coal is ejected at high velocity into a slag layer. An annular stream of nitrogen or argon enshrouds the coal stream. Oxygen is simultaneously ejected in an annular stream encircling the inert gas stream. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus to react with carbon monoxide gas rising from slag layer, thereby adding still more heat to the furnace. 7 figs.

  2. Fuel and oxygen addition for metal smelting or refining process

    DOE Patents [OSTI]

    Schlichting, Mark R. (Chesterton, IN)

    1994-01-01

    A furnace 10 for smelting iron ore and/or refining molten iron 20 is equipped with an overhead pneumatic lance 40, through which a center stream of particulate coal 53 is ejected at high velocity into a slag layer 30. An annular stream of nitrogen or argon 51 enshrouds the coal stream. Oxygen 52 is simultaneously ejected in an annular stream encircling the inert gas stream 51. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus 84 to react with carbon monoxide gas rising from slag layer 30, thereby adding still more heat to the furnace.

  3. ENZO: AN ADAPTIVE MESH REFINEMENT CODE FOR ASTROPHYSICS

    SciTech Connect (OSTI)

    Bryan, Greg L.; Turk, Matthew J. [Columbia University, Department of Astronomy, New York, NY 10025 (United States); Norman, Michael L.; Bordner, James; Xu, Hao; Kritsuk, Alexei G. [CASS, University of California, San Diego, 9500 Gilman Drive La Jolla, CA 92093-0424 (United States); O'Shea, Brian W.; Smith, Britton [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Abel, Tom; Wang, Peng; Skillman, Samuel W. [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, Menlo Park, CA 94025 (United States); Wise, John H. [Center for Relativistic Astrophysics, School of Physics, Georgia Institute of Technology, 837 State Street, Atlanta, GA (United States); Reynolds, Daniel R. [Department of Mathematics, Southern Methodist University, Box 750156, Dallas, TX 75205-0156 (United States); Collins, David C. [Department of Physics, Florida State University, Tallahassee, FL 32306 (United States); Harkness, Robert P. [NICS, Oak Ridge National Laboratory, 1 Bethel Valley Rd, Oak Ridge, TN 37831 (United States); Kim, Ji-hoon [Department of Astronomy and Astrophysics, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Kuhlen, Michael [Theoretical Astrophysics Center, University of California Berkeley, Hearst Field Annex, Berkeley, CA 94720 (United States); Goldbaum, Nathan [Institute for Astronomy, University of Edinburgh, Edinburgh EH9 3HJ (United Kingdom); Hummels, Cameron [Department of Astronomy/Steward Observatory, University of Arizona, 933 N. Cherry Ave., Tucson, AZ 85721 (United States); Tasker, Elizabeth [Physics Department, Faculty of Science, Hokkaido University, Kita-10 Nishi 8, Kita-ku, Sapporo 060-0810 (Japan); Collaboration: Enzo Collaboration; and others

    2014-04-01

    This paper describes the open-source code Enzo, which uses block-structured adaptive mesh refinement to provide high spatial and temporal resolution for modeling astrophysical fluid flows. The code is Cartesian, can be run in one, two, and three dimensions, and supports a wide variety of physics including hydrodynamics, ideal and non-ideal magnetohydrodynamics, N-body dynamics (and, more broadly, self-gravity of fluids and particles), primordial gas chemistry, optically thin radiative cooling of primordial and metal-enriched plasmas (as well as some optically-thick cooling models), radiation transport, cosmological expansion, and models for star formation and feedback in a cosmological context. In addition to explaining the algorithms implemented, we present solutions for a wide range of test problems, demonstrate the code's parallel performance, and discuss the Enzo collaboration's code development methodology.

  4. A comparative assessment of resource efficiency in petroleum refining

    SciTech Connect (OSTI)

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad; Cai, Hao; Wang, Michael; DiVita, Vincent B.

    2015-03-25

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study were incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.

  5. A comparative assessment of resource efficiency in petroleum refining

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad; Cai, Hao; Wang, Michael; DiVita, Vincent B.

    2015-03-25

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study weremore »incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.« less

  6. Development of Designer Diamond Technology for High-Pressure-High Temperature Experiments in Support of the Stockpile Stewardship

    SciTech Connect (OSTI)

    Vohra, Yogesh, K.

    2003-08-27

    OAK B127 Development of Designer Diamond Technology for High-Pressure-High Temperature Experiments in Support of the Stockpile Stewardship

  7. Response of diamond detector sandwich to 14 MeV neutrons

    E-Print Network [OSTI]

    M. Osipenko; M. Ripani; G. Ricco; B. Caiffi; F. Pompili; M. Pillon; G. Verona-Rinati; R. Cardarelli

    2015-10-27

    In this paper we present the measurement of the response of 50 $\\mu$m thin diamond detectors to 14 MeV neutrons. Such neutrons are produced in fusion reactors and are of particular interest for ITER neutron diagnostics. Among semiconductor detectors diamond has properties most appropriate for harsh radiation and temperature conditions of a fusion reactor. However, 300-500 $\\mu$m thick diamond detectors suffer significant radiation damage already at neutron fluences of the order of $10^{14}$ n/cm$^2$. It is expected that a 50 $\\mu$m thick diamond will withstand a fluence of $>10^{16}$ n/cm$^2$. We tested two 50 $\\mu$m thick single crystal CVD diamonds, stacked to form a "sandwich" detector for coincidence measurements. The detector measured the conversion of 14 MeV neutrons, impinging on one diamond, into $\\alpha$ particles which were detected in the second diamond in coincidence with nuclear recoil. For $^{12}C(n,\\alpha)^{9}Be$ reaction the total energy deposited in the detector gives access to the initial neutron energy value. The measured 14 MeV neutron detection sensitivity through this reaction by a detector of effective area 3$\\times$3 mm$^2$ was $5\\times 10^{-7}$ counts cm$^2$/n. This value is in good agreement with Geant4 simulations. The intrinsic energy resolution of the detector was found to be 240 keV FWHM which adds only 10 % to ITER's 14 MeV neutron energy spread.

  8. Science and technology of ultrananocrystalline diamond (UNCD) thin films for multifunctional devices

    SciTech Connect (OSTI)

    Auciello, O.; Krauss, A. R.; Gruen, D. M.; Jayatissa, A.; Sumant, A.; Tucek, J.; Mancini, D.; Molodvan, N.; Erdemir, A.; Ersoy, D.; Gardos, M. N.; Busman, H. G.; Meyer, E. M.

    2000-08-24

    MEMS devices are currently fabricated primarily in silicon because of the available surface machining technology. However, Si has poor mechanical and tribological properties, and practical MEMS devices are currently limited primarily to applications involving only bending and flexural motion, such as cantilever accelerometers and vibration sensors. However, because of the poor flexural strength and fracture toughness of Si, and the tendency of Si to adhere to hydrophyllic surfaces, even these simple devices have limited dynamic range. Future MEMS applications that involve significant rolling or sliding contact will require the use of new materials with significantly improved mechanical and tribological properties, and the ability to perform well in harsh environments. Diamond is a superhard material of high mechanical strength, exceptional chemical inertness, and outstanding thermal stability. The brittle fracture strength is 23 times that of Si, and the projected wear life of diamond MEMS moving mechanical assemblies (MEMS-MMAs) is 10,000 times greater than that of Si MMAs. However, as the hardest known material, diamond is notoriously difficult to fabricate. Conventional CVD thin film deposition methods offer an approach to the fabrication of ultra-small diamond structures, but the films have large grain size, high internal stress, poor intergranular adhesion, and very rough surfaces, and are consequently ill-suited for MEMS-MMA applications. A thin film deposition process has been developed that produces phase-pure nanocrystalline diamond with morphological and mechanical properties that are ideally suited for MEMS applications in general, and MMA use in particular. The authors have developed lithographic techniques for the fabrication of diamond microstructure including cantilevers and multi-level devices, acting as precursors to micro-bearings and gears, making nanocrystalline diamond a promising material for the development of high performance MEMS devices.

  9. Aspects of Western Refining, Inc.'s Proposed Acquisition of Giant Industries, Inc.

    Reports and Publications (EIA)

    2006-01-01

    Presentation of company-level, non-proprietary data and relevant aggregate data for U.S. refinery capacity and gasoline marketing of Western Refining and Giant Industries to inform discussions of Western Refining Inc.'s proposed acquisition of Giant Industries Inc. for a total of $1.5 billion, which was announced August 28, 2006.

  10. Abstraction and CounterexampleGuided Refinement in Model Checking of Hybrid Systems

    E-Print Network [OSTI]

    : Formal Verification, Abstraction, Model Checking, Hybrid Systems, Refinement, Counterexamples #12; 1Abstraction and Counterexample­Guided Refinement in Model Checking of Hybrid Systems Edmund Clarke a counterexample generated by the model checker. For hybrid systems, analysis of the counterexample requires

  11. Perspectives on Sustainable Materials, Instructor Susan Kaplan Fall 2014 Syllabus (subject to refining/updating)

    E-Print Network [OSTI]

    Wolberg, George

    Perspectives on Sustainable Materials, Instructor Susan Kaplan Fall 2014 Syllabus (subject to refining/updating) 1 SUS 7600A: Perspectives on Sustainable Materials Instructor: Susan Kaplan, LEED AP, Instructor Susan Kaplan Fall 2014 Syllabus (subject to refining/updating) 2 Primary Assignments: Basic

  12. Orientation Refinement of Virus Structures with Unknown Symmetry Yongchang Ji, Dan C. Marinescu

    E-Print Network [OSTI]

    Baker, Timothy S.

    Orientation Refinement of Virus Structures with Unknown Symmetry Yongchang Ji, Dan C. Marinescu, in particular the structure determina- tion of viruses and other large macromolecular complexes leads to data determina- tion of viruses, the orientation refinement. 1. Introduction and Motivation Viruses are large

  13. To appear in EPTCS. A CSP account of Event-B refinement

    E-Print Network [OSTI]

    Doran, Simon J.

    To appear in EPTCS. A CSP account of Event-B refinement Steve Schneider Department of Computing a CSP account of Event-B refinement, with a treatment for the first time of splitting events and of anticipated events. To this end, we define a CSP seman- tics for Event-B and show how the different forms

  14. FDR3 --A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong,

    E-Print Network [OSTI]

    Oxford, University of

    FDR3 -- A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong, Alexandre.roscoe}@cs.ox.ac.uk Abstract. FDR3 is a complete rewrite of the CSP refinement checker FDR2, incorporating a significant number describe the new algorithm that FDR3 uses to construct its internal representation of CSP processes

  15. FDR3 --A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong,

    E-Print Network [OSTI]

    Oxford, University of

    FDR3 -- A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong, Alexandre.roscoe}@cs.ox.ac.uk Abstract. FDR3 is a complete rewrite of the CSP refinement checker FDR2, incorporating a significant number describe the new algorithm that FDR3 uses to construct its in- ternal representation of CSP processes

  16. Rapidly-Exploring Roadmaps: Weighing Exploration vs. Refinement in Optimal Motion Planning

    E-Print Network [OSTI]

    Patil, Sachin

    Rapidly-Exploring Roadmaps: Weighing Exploration vs. Refinement in Optimal Motion Planning Ron of already explored regions to find better paths. We present the rapidly- exploring roadmap (RRM), a new to explore further or to refine the explored space by adding edges to the current roadmap to find higher

  17. The Nanoscience Beamline (I06) at Diamond Light Source

    SciTech Connect (OSTI)

    Dhesi, S. S.; Cavill, S. A.; Potenza, A.; Marchetto, H.; Mott, R. A.; Steadman, P.; Peach, A.; Shepherd, E. L.; Ren, X.; Wagner, U. H.; Reininger, R.

    2010-06-23

    The Nanoscience beamline (I06) is one of seven Diamond Phase-I beamlines which has been operational since January 2007 delivering polarised soft x-rays, for a PhotoEmission Electron Microscope (PEEM) and branchline, in the energy range 80-2100 eV. The beamline is based on a collimated plane grating monochromator with sagittal focusing elements, utilising two APPLE II helical undulator sources, and has been designed for high flux density at the PEEM sample position. A {approx}5 {mu}m ({sigma}) diameter beam is focussed onto the sample in the PEEM allowing a range of experiments using x-ray absorption spectroscopy (XAS), x-ray magnetic circular dichroism (XMCD) and x-ray magnetic linear dichroism (XMLD) as contrast mechanisms. The beamline is also equipped with a branchline housing a 6T superconducting magnet for XMCD and XMLD experiments. The magnet is designed to move on and off the branchline which allows a diverse range of experiments.

  18. Diamond detector for high rate monitors of fast neutrons beams

    SciTech Connect (OSTI)

    Giacomelli, L.; Rebai, M.; Cippo, E. Perelli; Tardocchi, M.; Fazzi, A.; Andreani, C.; Pietropaolo, A.; Frost, C. D.; Rhodes, N.; Schooneveld, E.; Gorini, G.

    2012-06-19

    A fast neutron detection system suitable for high rate measurements is presented. The detector is based on a commercial high purity single crystal diamond (SDD) coupled to a fast digital data acquisition system. The detector was tested at the ISIS pulsed spallation neutron source. The SDD event signal was digitized at 1 GHz to reconstruct the deposited energy (pulse amplitude) and neutron arrival time; the event time of flight (ToF) was obtained relative to the recorded proton beam signal t{sub 0}. Fast acquisition is needed since the peak count rate is very high ({approx}800 kHz) due to the pulsed structure of the neutron beam. Measurements at ISIS indicate that three characteristics regions exist in the biparametric spectrum: i) background gamma events of low pulse amplitudes; ii) low pulse amplitude neutron events in the energy range E{sub dep}= 1.5-7 MeV ascribed to neutron elastic scattering on {sup 12}C; iii) large pulse amplitude neutron events with E{sub n} < 7 MeV ascribed to {sup 12}C(n,{alpha}){sup 9}Be and 12C(n,n')3{alpha}.

  19. Modeling electron emission and surface effects from diamond cathodes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dimitrov, D. A.; Smithe, D.; Cary, J. R.; Ben-Zvi, I.; Rao, T.; Smedley, J.; Wang, E.

    2015-02-05

    We developed modeling capabilities, within the Vorpal particle-in-cell code, for three-dimensional (3D) simulations of surface effects and electron emission from semiconductor photocathodes. They include calculation of emission probabilities using general, piece-wise continuous, space-time dependent surface potentials, effective mass and band bending field effects. We applied these models, in combination with previously implemented capabilities for modeling charge generation and transport in diamond, to investigate the emission dependence on applied electric field in the range from approximately 2 MV/m to 17 MV/m along the [100] direction. The simulation results were compared to experimental data. For the considered parameter regime, conservation of transversemore »electron momentum (in the plane of the emission surface) allows direct emission from only two (parallel to [100]) of the six equivalent lowest conduction band valleys. When the electron affinity ? is the only parameter varied in the simulations, the value ? = 0.31 eV leads to overall qualitative agreement with the probability of emission deduced from experiments. Including band bending in the simulations improves the agreement with the experimental data, particularly at low applied fields, but not significantly. In this study, using surface potentials with different profiles further allows us to investigate the emission as a function of potential barrier height, width, and vacuum level position. However, adding surface patches with different levels of hydrogenation, modeled with position-dependent electron affinity, leads to the closest agreement with the experimental data.« less

  20. Modeling electron emission and surface effects from diamond cathodes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dimitrov, D. A. [Tech-X Corp., Boulder, CO (United States); Ben-Zvi, I. [Brookhaven National Lab. (BNL), Upton, NY (United States); Smithe, D. [Tech-X Corp., Boulder, CO (United States); Cary, J. R. [Tech-X Corp., Boulder, CO (United States); Rao, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Smedley, J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wang, E. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-02-07

    We developed modeling capabilities, within the Vorpal particle-in-cell code, for three-dimensional (3D) simulations of surface effects and electron emission from semiconductor photocathodes. They include calculation of emission probabilities using general, piece-wise continuous, space-time dependent surface potentials, effective mass and band bending field effects. We applied these models, in combination with previously implemented capabilities for modeling charge generation and transport in diamond, to investigate the emission dependence on applied electric field in the range from approximately 2 MV/m to 17 MV/m along the [100] direction. The simulation results were compared to experimental data. For the considered parameter regime, conservation of transverse electron momentum (in the plane of the emission surface) allows direct emission from only two (parallel to [100]) of the six equivalent lowest conduction band valleys. When the electron affinity ? is the only parameter varied in the simulations, the value ? = 0.31 eV leads to overall qualitative agreement with the probability of emission deduced from experiments. Including band bending in the simulations improves the agreement with the experimental data, particularly at low applied fields, but not significantly. Using surface potentials with different profiles further allows us to investigate the emission as a function of potential barrier height, width, and vacuum level position. However, adding surface patches with different levels of hydrogenation, modeled with position-dependent electron affinity, leads to the closest agreement with the experimental data.

  1. Ferromagnetic ordering of Cr and Fe doped p-type diamond: An ab initio study

    SciTech Connect (OSTI)

    Benecha, E. M.; Lombardi, E. B.

    2014-02-21

    Ferromagnetic ordering of transition metal dopants in semiconductors holds the prospect of combining the capabilities of semiconductors and magnetic systems in single hybrid devices for spintronic applications. Various semiconductors have so far been considered for spintronic applications, but low Curie temperatures have hindered room temperature applications. We report ab initio DFT calculations on the stability and magnetic properties of Fe and Cr impurities in diamond, and show that their ground state magnetic ordering and stabilization energies depend strongly on the charge state and type of co-doping. We predict that divacancy Cr{sup +2} and substitutional Fe{sup +1} order ferromagnetically in p-type diamond, with magnetic stabilization energies (and magnetic moment per impurity ion) of 16.9 meV (2.5 ?{sub B}) and 33.3 meV (1.0 ?{sub B}), respectively. These magnetic stabilization energies are much larger than what has been achieved in other semiconductors at comparable impurity concentrations, including the archetypal dilute magnetic semiconductor GaAs:Mn. In addition, substitutional Fe{sup +1} exhibits a strong half-metallic character, with the Fermi level crossing bands in only the spin down channel. These results, combined with diamond’s extreme properties, demonstrate that Cr or Fe dopedp-type diamond may successfully be considered in the search for room temperature spintronic materials.

  2. Fabrication of layered self-standing diamond film by dc arc plasma jet chemical vapor deposition

    SciTech Connect (OSTI)

    Chen, G. C.; Dai, F. W.; Li, B.; Lan, H.; Askari, J.; Tang, W. Z.; Lu, F. X.

    2007-01-15

    Layered self-standing diamond films, consisting of an upper layer, buffer layer, and a lower layer, were fabricated by fluctuating the ratio of methane to hydrogen in high power dc arc plasma jet chemical vapor deposition. There were micrometer-sized columnar diamond crystalline grains in both upper layer and lower layer. The size of the columnar diamond crystalline grains was bigger in the upper layer than that in the lower layer. The orientation of the upper layer was (110), while it was (111) for the lower layer. Raman results showed that no sp{sup 3} peak shift was found in the upper layer, but it was found and blueshifted in the lower layer. This indicated that the internal stress within the film body could be tailored by this layered structure. The buffer layer with nanometer-sized diamond grains formed by secondary nucleation was necessary in order to form the layered film. Growth rate was over 10 {mu}m/h in layered self-standing diamond film fabrication.

  3. Diamond-anvil high-pressure cell with improved x-ray collimation system

    DOE Patents [OSTI]

    Schiferl, D.; Olinger, B.W.; Livingston, R.W.

    1984-03-30

    An adjustable x-ray collimation system for a diamond-anvil high-pressure cell of the type including a cooperable piston and cylinder and a pair of opposing diamonds located between the head of the piston and the head of the cylinder. The x-ray collimation system includes a tubular insert which contains an x-ray collimator. The insert is engageable in the bore of the piston. The collimator is mounted within the insert by means of an elastomeric o-ring at the end closest the opposed diamonds, and by means of a set of adjustable set screws at the opposite end. By adjustment of the set screws the collimator can be pivoted about the o-ring and brought into alignment with the opposed diamonds and the sample contained therein. In the preferred embodiment there is further provided a set of plugs which are insertable in the bore of the collimator. The plugs have bores of different diameters. By successively inserting plugs of progressively smaller bore diameters and adjusting the alignment of the collimator with each plug, the collimator can be quickly brought into accurate alignment with the diamonds. The collimation system allows alignment of the collimator either before or after the cell has been loaded and pressurized.

  4. Diamond and Hydrogenated Carbons for Advanced Batteries and Fuel Cells: Fundamental Studies and Applications.

    SciTech Connect (OSTI)

    Swain; Greg M.

    2009-04-13

    The original funding under this project number was awarded for a period 12/1999 until 12/2002 under the project title Diamond and Hydrogenated Carbons for Advanced Batteries and Fuel Cells: Fundamental Studies and Applications. The project was extended until 06/2003 at which time a renewal proposal was awarded for a period 06/2003 until 06/2008 under the project title Metal/Diamond Composite Thin-Film Electrodes: New Carbon Supported Catalytic Electrodes. The work under DE-FG02-01ER15120 was initiated about the time the PI moved his research group from the Department of Chemistry at Utah State University to the Department of Chemistry at Michigan State University. This DOE-funded research was focused on (i) understanding structure-function relationships at boron-doped diamond thin-film electrodes, (ii) understanding metal phase formation on diamond thin films and developing electrochemical approaches for producing highly dispersed electrocatalyst particles (e.g., Pt) of small nominal particle size, (iii) studying the electrochemical activity of the electrocatalytic electrodes for hydrogen oxidation and oxygen reduction and (iv) conducting the initial synthesis of high surface area diamond powders and evaluating their electrical and electrochemical properties when mixed with a Teflon binder.

  5. Cosmos++: Relativistic Magnetohydrodynamics on Unstructured Grids with Local Adaptive Refinement

    E-Print Network [OSTI]

    Peter Anninos; P. Chris Fragile; Jay D. Salmonson

    2005-09-09

    A new code and methodology are introduced for solving the general relativistic magnetohydrodynamic (GRMHD) equations in fixed background spacetimes using time-explicit, finite-volume discretization. The code has options for solving the GRMHD equations using traditional artificial-viscosity (AV) or non-oscillatory central difference (NOCD) methods, or a new extended AV (eAV) scheme using artificial-viscosity together with a dual energy-flux-conserving formulation. The dual energy approach allows for accurate modeling of highly relativistic flows at boost factors well beyond what has been achieved to date by standard artificial viscosity methods. It provides the benefit of Godunov methods in capturing high Lorentz boosted flows but without complicated Riemann solvers, and the advantages of traditional artificial viscosity methods in their speed and flexibility. Additionally, the GRMHD equations are solved on an unstructured grid that supports local adaptive mesh refinement using a fully threaded oct-tree (in three dimensions) network to traverse the grid hierarchy across levels and immediate neighbors. A number of tests are presented to demonstrate robustness of the numerical algorithms and adaptive mesh framework over a wide spectrum of problems, boosts, and astrophysical applications, including relativistic shock tubes, shock collisions, magnetosonic shocks, Alfven wave propagation, blast waves, magnetized Bondi flow, and the magneto-rotational instability in Kerr black hole spacetimes.

  6. Refining a relativistic, hydrodynamic solver: Admitting ultra-relativistic flows

    E-Print Network [OSTI]

    J. P. Bernstein; P. A. Hughes

    2009-07-23

    We have undertaken the simulation of hydrodynamic flows with bulk Lorentz factors in the range 10^2--10^6. We discuss the application of an existing relativistic, hydrodynamic primitive-variable recovery algorithm to a study of pulsar winds, and, in particular, the refinement made to admit such ultra-relativistic flows. We show that an iterative quartic root finder breaks down for Lorentz factors above 10^2 and employ an analytic root finder as a solution. We find that the former, which is known to be robust for Lorentz factors up to at least 50, offers a 24% speed advantage. We demonstrate the existence of a simple diagnostic allowing for a hybrid primitives recovery algorithm that includes an automatic, real-time toggle between the iterative and analytical methods. We further determine the accuracy of the iterative and hybrid algorithms for a comprehensive selection of input parameters and demonstrate the latter's capability to elucidate the internal structure of ultra-relativistic plasmas. In particular, we discuss simulations showing that the interaction of a light, ultra-relativistic pulsar wind with a slow, dense ambient medium can give rise to asymmetry reminiscent of the Guitar nebula leading to the formation of a relativistic backflow harboring a series of internal shockwaves. The shockwaves provide thermalized energy that is available for the continued inflation of the PWN bubble. In turn, the bubble enhances the asymmetry, thereby providing positive feedback to the backflow.

  7. A Ni/surface-modified Diamond Composite Electroplating Coating on Superelastic NiTi Alloy as Potential Dental Bur Design

    E-Print Network [OSTI]

    Zheng, Yufeng

    A Ni/surface-modified Diamond Composite Electroplating Coating on Superelastic NiTi Alloy: Composite Electroplating; Surface-modified Diamond Particles; Interfacial Adhesion; NiTi alloy; Dental Bur into nickel coating, and its shank made of stainless steel. There are strong demands from the dentist

  8. Seasonal steroid hormone levels and their relation to reproduction in the Western Diamond-backed Rattlesnake, Crotalus

    E-Print Network [OSTI]

    Taylor, Emily

    Seasonal steroid hormone levels and their relation to reproduction in the Western Diamond-backed levels in blood samples from free-ranging Western Diamond-backed Rattle- snakes (Crotalus atrox physiology, from under- standing basic mechanisms to designing treatments for reproductive dysfunction

  9. Inkjet printing of nanodiamond suspensions in ethylene glycol for CVD growth of patterned diamond structures and practical applications

    E-Print Network [OSTI]

    Wilamowski, Bogdan Maciej

    Inkjet printing of nanodiamond suspensions in ethylene glycol for CVD growth of patterned diamond Available online 26 October 2008 Keywords: Inkjet Printing Diamond Nanodiamond Patterns Fabrication on a rigid or flexible substrate. In this work, nanodiamond suspensions in ethylene glycol were used as inks

  10. AlTiN layer effect on mechanical properties of Ti-doped diamond-like carbon composite coatings

    E-Print Network [OSTI]

    Volinsky, Alex A.

    AlTiN layer effect on mechanical properties of Ti-doped diamond-like carbon composite coatings Adhesion Ti/Ti-doped diamond-like carbon (DLC) and Ti/AlTiN/Ti-DLC composite coatings were deposited on the properties of these composite coatings was investigated through microstructure and mechanical properties

  11. High-temperature electron emission from diamond films Department of Mechanical Engineering, Vanderbilt University, Nashville, Tennessee 37235

    E-Print Network [OSTI]

    Walker, D. Greg

    High-temperature electron emission from diamond films S. H. Shin Department of Mechanical This work examines electron field-emission characteristics of polycrystalline diamond films at elevated-enhanced chemical-vapor deposition. To investigate the effect of increased temperatures on field emission, current

  12. Optical properties of polycrystalline diamond films in the far-infrared A. J. Gatesman, R. H. Giles, J. Waldman

    E-Print Network [OSTI]

    Massachusetts at Lowell, University of

    spurred interest in the growth and production of high quality diamond films for a variety of electrical and optical applications. Potential uses for vapor grown diamond include optical coatings and windows, heatTorr Deposition Pressure 50 Torr Substrate Temperature 875 - 950 C Hydrogen Flow 250 - 500 sccm Methane Flow 2 - 5

  13. Effects of thickness and cycle parameters on fretting wear behavior of CVD diamond coatings on steel substrates

    E-Print Network [OSTI]

    Bristol, University of

    , mechanical seals, cutting tools, and gears. Well-adhered diamond films deposited on steel surfaces can leadEffects of thickness and cycle parameters on fretting wear behavior of CVD diamond coatings) methods. A Co-containing tungsten-carbide coating prepared by high velocity oxy-fuel spraying was used

  14. The Development of Open Water-lubricated Polycrystalline Diamond (PCD) Thrust Bearings for Use in Marine Hydrokinetic (MHK) Energy Machines

    SciTech Connect (OSTI)

    Cooley, Craig, H.; Khonsari, Michael,, M; Lingwall, Brent

    2012-11-28

    Polycrstalline diamond (PCD) bearings were designed, fabricated and tested for marine-hydro-kinetic (MHK) application. Bearing efficiency and life were evaluated using the US Synthetic bearing test facility. Three iterations of design, build and test were conducted to arrive at the best bearing design. In addition life testing that simulated the starting and stopping and the loading of real MHK applications were performed. Results showed polycrystalline diamond bearings are well suited for MHK applications and that diamond bearing technology is TRL4 ready. Based on life tests results bearing life is estimated to be at least 11.5 years. A calculation method for evaluating the performance of diamond bearings of round geometry was also investigated and developed. Finally, as part of this effort test bearings were supplied free of charge to the University of Alaska for further evaluation. The University of Alaska test program will subject the diamond bearings to sediment laden lubricating fluid.

  15. Development of Designer Diamond Technology for High Pressure High Temperature Experiments in Support of Stockpile Stewardship Program

    SciTech Connect (OSTI)

    Vohra, Yogesh, K.

    2009-10-28

    The role of nitrogen in the fabrication of designer diamond was systematically investigated by adding controlled amount of nitrogen in hydrogen/methane/oxygen plasma. This has led to a successful recipe for reproducible fabrication of designer diamond anvils for high-pressure high-temperature research in support of stockpile stewardship program. In the three-year support period, several designer diamonds fabricated with this new growth chemistry were utilized in high-pressure experiments at UAB and Lawrence Livermore National Laboratory. The designer diamond anvils were utilized in high-pressure studies on heavy rare earth metals, high pressure melting studies on metals, and electrical resistance measurements on iron-based layered superconductors under high pressures. The growth chemistry developed under NNSA support can be adapted for commercial production of designer diamonds.

  16. Metal/Diamond Composite Thin-Film Electrodes: New Carbon Supported Catalytic Electrodes

    SciTech Connect (OSTI)

    Greg M. Swain, PI

    2009-03-10

    The DOE-funded research conducted by the Swain group was focused on (i) understanding structure-function relationships at boron-doped diamond thin-film electrodes, (ii) understanding metal phase formation on diamond thin films and developing electrochemical approaches for producing highly dispersed electrocatalyst particles (e.g., Pt) of small nominal particle size, (iii) studying the electrochemical activity of the electrocatalytic electrodes for hydrogen oxidation and oxygen reduction and (iv) conducting the initial synthesis of high surface area diamond powders and evaluating their electrical and electrochemical properties when mixed with a Teflon binder. (Note: All potentials are reported versus Ag/AgCl (sat'd KCl) and cm{sup 2} refers to the electrode geometric area, unless otherwise stated).

  17. Ultraviolet photosensitivity of sulfur-doped micro- and nano-crystalline diamond

    SciTech Connect (OSTI)

    Mendoza, Frank; Makarov, Vladimir; Hidalgo, Arturo; Weiner, Brad; Morell, Gerardo

    2011-06-06

    The room-temperature photosensitivity of sulfur-doped micro- (MCD), submicro- (SMCD) and nano- (NCD) crystalline diamond films synthesized by hot-filament chemical vapor deposition was studied. The structure and composition of these diamond materials were characterized by Raman spectroscopy, scanning electron microscopy and X-ray diffraction. The UV sensitivity and response time were studied for the three types of diamond materials using a steady state broad UV excitation source and two pulsed UV laser radiations. It was found that they have high sensitivity in the UV region, as high as 109 sec-1mV-1 range, linear response in a broad spectral range below 320 nm, photocurrents around ~10-5 A, and short response time better than 100 ns, which is independent of fluency intensity. A phenomenological model was applied to help understand the role of defects and dopant concentration on the materials’ photosensitivity.

  18. Ultraviolet photosensitivity of sulfur-doped micro- and nano-crystalline diamond

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mendoza, Frank; Makarov, Vladimir; Hidalgo, Arturo; Weiner, Brad; Morell, Gerardo

    2011-06-06

    The room-temperature photosensitivity of sulfur-doped micro- (MCD), submicro- (SMCD) and nano- (NCD) crystalline diamond films synthesized by hot-filament chemical vapor deposition was studied. The structure and composition of these diamond materials were characterized by Raman spectroscopy, scanning electron microscopy and X-ray diffraction. The UV sensitivity and response time were studied for the three types of diamond materials using a steady state broad UV excitation source and two pulsed UV laser radiations. It was found that they have high sensitivity in the UV region, as high as 109 sec-1mV-1 range, linear response in a broad spectral range below 320 nm, photocurrentsmore »around ~10-5 A, and short response time better than 100 ns, which is independent of fluency intensity. A phenomenological model was applied to help understand the role of defects and dopant concentration on the materials’ photosensitivity.« less

  19. Development of Single Crystal Chemical Vapor Deposition Diamonds for Detector Applications

    SciTech Connect (OSTI)

    Harris Kagan; K.K. Gan; Richard Kass

    2009-03-31

    Diamond was studied as a possible radiation hard technology for use in future high radiation environments. With the commissioning of the LHC expected in 2009, and the LHC upgrades expected in 2013, all LHC experiments are planning for detector upgrades which require radiation hard technologies. Chemical Vapor Deposition (CVD) diamond has now been used extensively in beam conditions monitors as the innermost detectors in the highest radiation areas of BaBar, Belle and CDF and is installed in all LHC experiments. As a result, this material is now being discussed as an alternative sensor material for tracking very close to the interaction region of the super-LHC where the most extreme radiation conditions will exist. Our work addressed the further development of the new material, single-crystal Chemical Vapor Deposition diamond, towards reliable industrial production of large pieces and new geometries needed for detector applications.

  20. Development of Single Crystal Chemical Vapor Deposition Diamonds for Detector Applications

    SciTech Connect (OSTI)

    Rainer Wallny

    2012-10-15

    Diamond was studied as a possible radiation hard technology for use in future high radiation environments. With the commissioning of the LHC expected in 2010, and the LHC upgrades expected in 2015, all LHC experiments are planning for detector upgrades which require radiation hard technologies. Chemical Vapor Deposition (CVD) diamond has now been used extensively in beam conditions monitors as the innermost detectors in the highest radiation areas of BaBar, Belle and CDF and is installed and operational in all LHC experiments. As a result, this material is now being discussed as an alternative sensor material for tracking very close to the interaction region of the super-LHC where the most extreme radiation conditions will exist. Our work addressed the further development of the new material, single-crystal Chemical Vapor Deposition diamond, towards reliable industrial production of large pieces and new geometries needed for detector applications.

  1. Numerical Modeling on Thermal Loading of Diamond Crystal in X-ray FEL Oscillator

    E-Print Network [OSTI]

    Song, Meiqi; Guo, Yuhang; Li, Kai; Deng, Haixiao

    2015-01-01

    Due to high reflectivity and high resolution to X-ray pulse, diamond is one of the most popular Bragg crystals serving as the reflecting mirror and mono-chromator in the next generation free electrons lasers (FELs). The energy deposition of X-rays will result in thermal heating, and thus lattice expanding of diamond crystal, which may degrade the performance of X-ray FELs. In this paper, the thermal loading effect of diamond crystal for X-ray FEL oscillator has been systematically studied by the combined simulation of Geant4 and ANSYS, and its dependence on the environment temperature, crystal size, X-ray pulse repetition rate and pulse energy are presented.

  2. MEASUREMENT OF THE SECONDARY EMISSION YIELD OF A THIN DIAMOND WINDOW IN TRANSMISSION MODE.

    SciTech Connect (OSTI)

    CHANG, X.; RAO, T.; SMEDLEY, J.; ET AL.

    2005-05-16

    The secondary emission enhanced photoinjector (SEEP) is a promising new approach to the generation of high-current, high-brightness electron beams. A low current primary electron beam with energy of a few thousand electron-volts strikes a specially prepared diamond window which emits secondary electrons with a current two orders of magnitude higher. The secondary electrons are created at the back side of the diamond and drift through the window under the influence of a strong electrical field. A hydrogen termination at the exit surface of the window creates a negative electron affinity (NEA) which allows the electrons to leave the diamond. An experiment was performed to measure the secondary electron yield and other properties. The results are discussed in this paper.

  3. Science and technology of ultrananocrystalline diamond (UNCD) thin films for multifunctional devices.

    SciTech Connect (OSTI)

    Auciello, O.; Gruen, D. M.; Krauss, A. R.; Jayatissa, A.; Sumant, A.; Tucek, J.; Mancini, D.; Moldovan, N.; Erdemir, A.; Ersoy, D.; Gardos, M. N.; Busmann, H. G.; Meyer, E. M.

    2000-11-15

    MEMS devices are currently fabricated primarily in silicon because of the available surface machining technology. However, Si has poor mechanical and tribological properties, and practical MEMS devices are currently limited primarily to applications involving only bending and flexural motion, such as cantilever accelerometers and vibration sensors, However, because of the poor flexural strength and fracture toughness of Si, and the tendency of Si to adhere to hydrophyllic surfaces, even these simple devices have limited dynamic range. Future MEMS applications that involve significant rolling or sliding contact will require the use of new materials with significantly improved mechanical and tribological properties, and the ability to perform well in harsh environments. Diamond is a superhard material of high mechanical strength, exceptional chemical inertness, and outstanding thermal stability. The brittle fracture strength is 23 times that of Si, and the projected wear life of diamond MEMS moving mechanical assemblies (MEMS-MMAS) is 10,000 times greater than that of Si MMAs. However, as the hardest known material, diamond is notoriously difficult to fabricate. Conventional CVD thin film deposition methods offer an approach to the fabrication of ultra-small diamond structures, but the films have large grain size, high internal stress, poor intergranular adhesion, and very rough surfaces, and are consequently ill-suited for MEMS-MMA applications. A thin film deposition process has been developed that produces phase-pure ultrananocrystalline diamond (UNCD) with morphological and mechanical properties that are ideally suited for MEMS applications in general, and MMA use in particular. We have developed lithographic techniques for the fabrication of diamond microstructure including cantilevers and multi-level devices, acting as precursors to micro-bearings and gears, making UNCD a promising material for the development of high performance MEMS devices.

  4. The Nanoscience Beamline at Diamond, Optical Design Considerations

    SciTech Connect (OSTI)

    Reininger, Ruben; Dhesi, Sarnjeet

    2007-01-19

    The main requirement of the Nanoscience Beamline at Diamond is to deliver the highest possible flux at the sample position of a PEEM with a resolving power of about 5000 in the energy range 80-2000 eV. The source of the beamline is a couple of APPLE II helical undulators in tandem that can also be used separately to allow for faster switching of the circular polarization. Based on its versatility, a collimated plane grating monochromator using sagittally focusing elements was chosen to cover the required energy range with three gratings. The operation of this monochromator requires a collimated beam incident on the grating along the dispersion direction. This can be achieved either with a toroid, focusing with its major radius along the non-dispersive direction at the exit slit, or with a sagittal cylinder. The former option uses a sagittal cylinder after the grating to focus the collimated beam at the exit slit. In the latter case, a toroid after the grating is used to focus in both directions at the exit slit. The advantage of the toroid downstream the grating is the higher horizontal demagnification. This configuration fulfills the Nanoscience Beamline's required resolving power but cannot be used to achieve very high resolution due to the astigmatic coma aberration of the toroidal mirror. The focusing at the sample position is performed with a KB pair of plane elliptical mirrors. Assuming achievable values for the errors on all the optical surfaces, the expected spots FWHW in the horizontal and vertical directions are 10 {mu}m and 3 {mu}m, respectively. The calculated photon flux at this spot at 5000 resolving power is >1012 photons/sec between 80 and 1600 eV for linearly polarized light and between 106 and 1200 eV for circularly polarized light. The beamline is expected to be operational in January 2007.

  5. Synthesis of new Diamond-like B-C Phases under High Pressure and Temperatures

    SciTech Connect (OSTI)

    Ming, L. C.; Zinin, P. V.; Sharma, S. K.

    2014-04-22

    A cubic BC3 (c-BC3) phase was synthesized by direct transformation from graphitic phases at a pressure of 39 GPa and temperature of 2200 K in a laser-heated diamond anvil cell (DAC). A combination of x-ray diffraction (XRD), electron diffraction (ED), transmission electron microscopy (TEM) imaging, and electron energy loss spectroscopy (EELS) measurements lead us to conclude that the obtained phase is hetero-nano-diamond, c-BC3. The EELS measurements show that the atoms inside the cubic structure are bonded by sp3 bonds.

  6. Design of flexible ultrahigh-Q microcavities in diamond-based photonic crystal slabs

    E-Print Network [OSTI]

    Snjezana Tomljenovic-Hanic; Andrew D. Greentree; C. Martijn de Sterke; Steven Prawer

    2008-12-10

    We design extremely flexible ultrahigh-Q diamond-based double-heterostructure photonic crystal slab cavities by modifying the refractive index of the diamond. The refractive index changes needed for ultrahigh-Q cavities with $Q ~ 10^7$, are well within what can be achieved ($\\Delta n \\sim 0.02$). The cavity modes have relatively small volumes $Vdesign is flexible because the range of parameters, cavity length and the index changes, that enables an ultrahigh-Q is quite broad. Furthermore as the index modification is post-processed, an efficient technique to generate cavities around defect centres is achievable, improving prospects for defect-tolerant quantum architectures.

  7. Photo-stimulated low electron temperature high current diamond film field emission cathode

    DOE Patents [OSTI]

    Shurter; Roger Philips (Los Alamos, NM), Devlin; David James (Santa Fe, NM), Moody; Nathan Andrew (Los Alamos, NM), Taccetti; Jose Martin (Santa Fe, NM), Russell; Steven John (Los Alamos, NM)

    2012-07-24

    An electron source includes a back contact surface having a means for attaching a power source to the back contact surface. The electron source also includes a layer comprising platinum in direct contact with the back contact surface, a composite layer of single-walled carbon nanotubes embedded in platinum in direct contact with the layer comprising platinum. The electron source also includes a nanocrystalline diamond layer in direct contact with the composite layer. The nanocrystalline diamond layer is doped with boron. A portion of the back contact surface is removed to reveal the underlying platinum. The electron source is contained in an evacuable container.

  8. Field emission from bias-grown diamond thin films in a microwave plasma

    DOE Patents [OSTI]

    Gruen, Dieter M. (Downers Grove, IL); Krauss, Alan R. (Naperville, IL); Ding, Ming Q. (Beijing, CN); Auciello, Orlando (Bolinbrook, IL)

    2002-01-01

    A method of producing diamond or diamond like films in which a negative bias is established on a substrate with an electrically conductive surface in a microwave plasma chemical vapor deposition system. The atmosphere that is subjected to microwave energy includes a source of carbon, nitrogen and hydrogen. The negative bias is maintained on the substrate through both the nucleation and growth phase of the film until the film is continuous. Biases between -100V and -200 are preferred. Carbon sources may be one or more of CH.sub.4, C.sub.2 H.sub.2 other hydrocarbons and fullerenes.

  9. Longitudinal spin-relaxation in nitrogen-vacancy centers in electron irradiated diamond

    E-Print Network [OSTI]

    A. Jarmola; A. Berzins; J. Smits; K. Smits; J. Prikulis; F. Gahbauer; R. Ferber; D. Erts; M. Auzinsh; D. Budker

    2015-11-19

    We present systematic measurements of longitudinal relaxation rates ($1/T_1$) of spin polarization in the ground state of the nitrogen-vacancy (NV$^-$) color center in synthetic diamond as a function of NV$^-$ concentration and magnetic field $B$. NV$^-$ centers were created by irradiating a Type 1b single-crystal diamond along the [100] axis with 200 keV electrons from a transmission electron microscope with varying doses to achieve spots of different NV$^-$ center concentrations. Values of ($1/T_1$) were measured for each spot as a function of $B$.

  10. J4.3 LARGE-EDDY SIMULATION ACROSS A GRID REFINEMENT INTERFACE USING EXPLICIT FILTERING AND RECONSTRUCTION

    E-Print Network [OSTI]

    Chow, Fotini Katopodes

    reflect off grid refinement interfaces, specifically on the outflow boundary from a fine to a coarse grid reflection off grid refinement interfaces by forcing the filter-resolved scale on a fine grid to equalJ4.3 LARGE-EDDY SIMULATION ACROSS A GRID REFINEMENT INTERFACE USING EXPLICIT FILTERING

  11. Influence of Aluminum Content on Grain Refinement and Strength of AZ31 Magnesium GTA Weld Metal

    SciTech Connect (OSTI)

    Babu, N. Kishore [Singapore Institute of Manufacturing Technology; Cross, Carl E. [Los Alamos National Laboratory

    2012-06-28

    The goal is to characterize the effect of Al content on AZ31 weld metal, the grain size and strength, and examine role of Al on grain refinement. The approach is to systematically vary the aluminum content of AZ31 weld metal, Measure average grain size in weld metal, and Measure cross-weld tensile properties and hardness. Conclusions are that: (1) increased Al content in AZ31 weld metal results in grain refinement Reason: higher undercooling during solidification; (2) weld metal grain refinement resulted in increased strength & hardness Reason: grain boundary strengthening; and (3) weld metal strength can be raised to wrought base metal levels.

  12. RAM: a Relativistic Adaptive Mesh Refinement Hydrodynamics Code

    SciTech Connect (OSTI)

    Zhang, Wei-Qun; MacFadyen, Andrew I.; /Princeton, Inst. Advanced Study

    2005-06-06

    The authors have developed a new computer code, RAM, to solve the conservative equations of special relativistic hydrodynamics (SRHD) using adaptive mesh refinement (AMR) on parallel computers. They have implemented a characteristic-wise, finite difference, weighted essentially non-oscillatory (WENO) scheme using the full characteristic decomposition of the SRHD equations to achieve fifth-order accuracy in space. For time integration they use the method of lines with a third-order total variation diminishing (TVD) Runge-Kutta scheme. They have also implemented fourth and fifth order Runge-Kutta time integration schemes for comparison. The implementation of AMR and parallelization is based on the FLASH code. RAM is modular and includes the capability to easily swap hydrodynamics solvers, reconstruction methods and physics modules. In addition to WENO they have implemented a finite volume module with the piecewise parabolic method (PPM) for reconstruction and the modified Marquina approximate Riemann solver to work with TVD Runge-Kutta time integration. They examine the difficulty of accurately simulating shear flows in numerical relativistic hydrodynamics codes. They show that under-resolved simulations of simple test problems with transverse velocity components produce incorrect results and demonstrate the ability of RAM to correctly solve these problems. RAM has been tested in one, two and three dimensions and in Cartesian, cylindrical and spherical coordinates. they have demonstrated fifth-order accuracy for WENO in one and two dimensions and performed detailed comparison with other schemes for which they show significantly lower convergence rates. Extensive testing is presented demonstrating the ability of RAM to address challenging open questions in relativistic astrophysics.

  13. Process for solvent refining of coal using a denitrogenated and dephenolated solvent

    DOE Patents [OSTI]

    Garg, Diwakar (Macungie, PA); Givens, Edwin N. (Bethlehem, PA); Schweighardt, Frank K. (Allentown, PA)

    1984-01-01

    A process is disclosed for the solvent refining of non-anthracitic coal at elevated temperatures and pressure in a hydrogen atmosphere using a hydrocarbon solvent which before being recycled in the solvent refining process is subjected to chemical treatment to extract substantially all nitrogenous and phenolic constituents from the solvent so as to improve the conversion of coal and the production of oil in the solvent refining process. The solvent refining process can be either thermal or catalytic. The extraction of nitrogenous compounds can be performed by acid contact such as hydrogen chloride or fluoride treatment, while phenolic extraction can be performed by caustic contact or contact with a mixture of silica and alumina.

  14. Adjustable Speed Drives in the U.S. Petroleum Refining, Petrochemical, and Chemical Industries 

    E-Print Network [OSTI]

    Foley, D. J.; Chodorowski, A.

    1993-01-01

    This paper describes applications and incentives for the use of variable frequency drivers (VFD) in the petroleum refining, petrochemical, and chemical industries. VFDs are a particular type of adjustable speed driver (ASD) found prevalently...

  15. Grain refinement and texture development of cast bi90sb10 alloy via severe plastic deformation 

    E-Print Network [OSTI]

    Im, Jae-taek

    2009-05-15

    The purpose of this work was to study learn about grain refinement mechanisms and texture development in cast n-type Bi90Sb10 alloy caused by severe plastic deformation. The practical objective is to produce a fine grained ...

  16. An Assessment of carbon reduction technology opportunities in the petroleum refining industry.

    SciTech Connect (OSTI)

    Petrick, M.

    1998-09-14

    The refining industry is a major source of CO{sub 2} emissions in the industrial sector and therefore in the future can expect to face increasing pressures to reduce emission levels. The energy used in refining is impacted by market dictates, crude quality, and environmental regulations. While the industry is technologically advanced and relatively efficient opportunities nevertheless exist to reduce energy usage and CO{sub 2} emissions. The opportunities will vary from refinery to refinery and will necessarily have to be economically viable and compatible with each refiner's strategic plans. Recognizing the many factors involved, a target of 15-20% reduction in CO{sub 2} emissions from the refining sector does not appear to be unreasonable, assuming a favorable investment climate.

  17. Impact of Environmental Compliance Costs on U.S. Refining Profitability

    Reports and Publications (EIA)

    1997-01-01

    Assesses the effects of pollution abatement requirements on the financial performance of U.S. petroleum refining and marketing operations. The analysis draws heavily on financial and operating data from the Energy Information Administration's Financial Reporting System (FRS).

  18. Economic impact of the European Union Emission Trading Scheme : evidence from the refining sector

    E-Print Network [OSTI]

    Lacombe, Romain H

    2008-01-01

    I study the economic impact of the European Union Emission Trading Scheme (EU ETS) on the refining industry in Europe. I contrast previous ex-ante studies with the lessons from a series of interviews I conducted with ...

  19. Classical descriptive set theory as a refinement of effective descriptive set theory

    E-Print Network [OSTI]

    Moschovakis, Yiannis N.

    as a refinement of the classical theory of definability (on Polish spaces) developed in the first half of the 20th the notions I need, as well as (condensed) outlines of the required arguments. 1. Recursion in Baire space We

  20. Refinement of light-responsive transcript lists using rice oligonucleotide arrays: evaluation of gene-redundancy.

    E-Print Network [OSTI]

    2008-01-01

    Refinement of Light-Responsive Transcript Lists Using Riceleaves of two-week old plants grown in a natural light-darkcycle (light-grown) in comparison to RNA from October 2008 |

  1. Energy and Environmental Profile of the U.S. Petroleum Refining Industry

    SciTech Connect (OSTI)

    Pellegrino, Joan; Brueske, Sabine; Carole, Tracy; Andres, Howard

    2007-11-01

    This 2007 report provides an overview of the U.S. petroleum refining industry, including new data on market trends and energy and material consumption, as well as information on environmental performance.

  2. Hazard/Risk Assessment A REFINED AQUATIC ECOLOGICAL RISK ASSESSMENT FOR A PYRETHROID

    E-Print Network [OSTI]

    Peterson, Robert K. D.

    Hazard/Risk Assessment A REFINED AQUATIC ECOLOGICAL RISK ASSESSMENT FOR A PYRETHROID INSECTICIDE risk assessments, the authors performed a probabilistic aquatic ecological risk assessment. The present study is the first ecological risk assessment for pyrethroids to quantitatively integrate

  3. Refine your search Select options from the menu on the left hand

    E-Print Network [OSTI]

    Yener, Aylin

    ://psu.summon.serialssolutions.comhttp://psu.summon.serialssolutions.com F I N A L LY : RESEARCH AS EASYAS 1-2-3 #12;1 Enter search term into search box. 2 Refine results relevant articles were published in that year. Include or Exclude subject terms from your searchRefine your search Select options from the menu on the left hand side of the results screen

  4. A comparison of the performance of waterfloods using similar refined and crude oils 

    E-Print Network [OSTI]

    Walton, Daylon Lynn

    1960-01-01

    A COMPARISON OF THE PERFORMANCE OF WATERFI, GODS USING SIMILAR REFINED AND CRUDE OILS A Thesis By DAYLON L. WALTON Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August, 1960 Major Subject: PETROLEUM ENGINEERING A COMPARISON OF THE PERFORMANCE OF WATERFLOODS USING SIMILAR REFINED AND CRUDE OILS A Thesis By DAYLON L. WALTON Approved as to style and content by: (Chairman f...

  5. Ultratough, Thermally Stable Polycrystalline Diamond/Silicon Carbide Nanocomposites for Drill Bits

    SciTech Connect (OSTI)

    2009-03-01

    This factsheet describes a research project whose goal is to develop and produce in quantity novel superhard and ultratough thermally stable polycrystalline (TSP) diamond/SiC nanocomposites reinforced with SiC/C nanofibers for drill-bit applications and multiple industrial functions.

  6. Diamond anvil cell for spectroscopic investigation of materials at high temperature, high pressure and shear

    DOE Patents [OSTI]

    Westerfield, Curtis L. (Espanola, NM); Morris, John S. (Los Alamos, NM); Agnew, Stephen F. (Los Alamos, NM)

    1997-01-01

    Diamond anvil cell for spectroscopic investigation of materials at high temperature, high pressure and shear. A cell is described which, in combination with Fourier transform IR spectroscopy, permits the spectroscopic investigation of boundary layers under conditions of high temperature, high pressure and shear.

  7. Diamond anvil cell for spectroscopic investigation of materials at high temperature, high pressure and shear

    DOE Patents [OSTI]

    Westerfield, C.L.; Morris, J.S.; Agnew, S.F.

    1997-01-14

    Diamond anvil cell is described for spectroscopic investigation of materials at high temperature, high pressure and shear. A cell is described which, in combination with Fourier transform IR spectroscopy, permits the spectroscopic investigation of boundary layers under conditions of high temperature, high pressure and shear. 4 figs.

  8. Multiple scales of diamond mining in Akwatia, Ghana: addressing environmental and human development impact

    E-Print Network [OSTI]

    Vermont, University of

    impact on environmental degradation, health, and the livelihood of artisanal miners. We concludeMultiple scales of diamond mining in Akwatia, Ghana: addressing environmental and human development impact Kaakpema Yelpaalaa,b , Saleem H. Alic,d, * a Yale University, School of Epidemiology and Public

  9. Chapter 2.20 Msink20 Diamond Seeding & Lift-off (General Solvent Sink)

    E-Print Network [OSTI]

    Healy, Kevin Edward

    Chapter 2.20 Msink20 Diamond Seeding & Lift-off (General Solvent Sink) (msink20) (582A) 1/eyewash station at the east side of Rm. 582A (polisher/wet lab area); to activate the shower pull down Operation 8.1 Two ultrasonic baths- plus user-owned setups- are stationed on the deck of this sink. The left

  10. Chemically vapor deposited diamond-tipped one-dimensional nanostructures and nanodiamondsilicananotube composites

    E-Print Network [OSTI]

    Wilamowski, Bogdan Maciej

    Chemically vapor deposited diamond-tipped one-dimensional nanostructures and nanodiamond vapor deposition Composite thin films of nanodiamond and silica nanotubes were synthesized by means with nanodiamond particles. SEM, Raman spectroscopy, and EDX were used to analyze the composite. Wet chemical

  11. Slide diamond burnishing of tool steels with adhesive coatings and diffusion layers

    E-Print Network [OSTI]

    North Texas, University of

    Slide diamond burnishing of tool steels with adhesive coatings and diffusion layers W. Brostow*1 modification of selected tool steels. The steels were covered with adhesive coatings of the hard chrome type was determined by a profilometer before and after burnishing. Adhesion of coatings to steel was determined

  12. Automated Testing of HVAC Systems for Commissioning Tim Salsbury and Rick Diamond

    E-Print Network [OSTI]

    Diamond, Richard

    carrying out a proof of operation. In large modern buildings, the energy management and control system monitoring period following each change in setpoint, characterize system performance. These indicesAutomated Testing of HVAC Systems for Commissioning Tim Salsbury and Rick Diamond Lawrence Berkeley

  13. WM00 Conference, February 27-March 2, 2000 DEMONSTRATING DIAMOND WIRE CUTTING OF THE TFTR

    E-Print Network [OSTI]

    task for dismantling. Plasma arc cutting is the current baseline technology for the dismantlement plasma arc cutting. This paper will provide detailed results of the diamond wire cutting demonstration: The baseline planning for dismantling the vacuum vessel utilizes plasma arc torch cutting. This involves

  14. Propagation and absorption of high-intensity femtosecond laser radiation in diamond

    SciTech Connect (OSTI)

    Kononenko, V V; Konov, V I; Gololobov, V M; Zavedeev, E V [A M Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)

    2014-12-31

    Femtosecond interferometry has been used to experimentally study the photoexcitation of the electron subsystem of diamond exposed to femtosecond laser pulses of intensity 10{sup 11} to 10{sup 14} W cm{sup -2}. The carrier concentration has been determined as a function of incident intensity for three harmonics of a Ti : sapphire laser (800, 400 and 266 nm). The results demonstrate that, in a wide range of laser fluences (up to those resulting in surface and bulk graphitisation), a well-defined multiphoton absorption prevails. We have estimated nonlinear absorption coefficients for pulsed radiation at ? = 800 nm (four-photon transition) and at 400 and 266 nm (indirect and direct two-photon transitions, respectively). It has also been shown that, at any considerable path length of a femtosecond pulse in diamond (tens of microns or longer), the laser beam experiences a severe nonlinear transformation, determining the amount of energy absorbed by the lattice, which is important for the development of technology for diamond photostructuring by ultrashort pulses. The competition between wave packet self-focusing and the plasma defocusing effect is examined as a major mechanism governing the propagation of intense laser pulses in diamond. (interaction of laser radiation with matter. laser plasma)

  15. Eclogitic Diamond Formation at Jwaneng: No Room for a Recycled Component

    E-Print Network [OSTI]

    Cartigny, Pierre

    and chemistry and the volatiles of the Earth's mantle (1, 2). Two main diamond types are identified on the basis (but chemically distinct) to either oli- vine-bearing peridotites or eclogites and are commonly. On the basis of the mea- sured 13 C values (12), we selected 31 sili- cate-bearing and 9 sulfide-bearing dia

  16. High surface area diamond-like carbon electrodes grown on vertically aligned carbon nanotubes

    E-Print Network [OSTI]

    Bristol, University of

    High surface area diamond-like carbon electrodes grown on vertically aligned carbon nanotubes H packed forests of vertically aligned multiwall carbon nanotubes (VACNTs). The DLC:VACNT composite film and high corrosion resistance [13,14]. Other type of dopants, including nickel and boron, also result

  17. Method to grow pure nanocrystalline diamond films at low temperatures and high deposition rates

    DOE Patents [OSTI]

    Carlisle, John A. (Plainfield, IL); Gruen, Dieter M. (Downers Grove, IL); Auciello, Orlando (Bolingbrook, IL); Xiao, Xingcheng (Woodridge, IL)

    2009-07-07

    A method of depositing nanocrystalline diamond film on a substrate at a rate of not less than about 0.2 microns/hour at a substrate temperature less than about 500.degree. C. The method includes seeding the substrate surface with nanocrystalline diamond powder to an areal density of not less than about 10.sup.10sites/cm.sup.2, and contacting the seeded substrate surface with a gas of about 99% by volume of an inert gas other than helium and about 1% by volume of methane or hydrogen and one or more of acetylene, fullerene and anthracene in the presence of a microwave induced plasma while maintaining the substrate temperature less than about 500.degree. C. to deposit nanocrystalline diamond on the seeded substrate surface at a rate not less than about 0.2 microns/hour. Coatings of nanocrystalline diamond with average particle diameters of less than about 20 nanometers can be deposited with thermal budgets of 500.degree. C.-4 hours or less onto a variety of substrates such as MEMS devices.

  18. High quality factor nanocrystalline diamond micromechanical resonators limited by thermoelastic damping

    SciTech Connect (OSTI)

    Najar, Hadi; Chan, Mei-Lin; Yang, Hsueh-An; Lin, Liwei; Cahill, David G.; Horsley, David A.

    2014-04-14

    We demonstrate high quality factor thin-film nanocrystalline diamond micromechanical resonators with quality factors limited by thermoelastic damping. Cantilevers, single-anchored and double-anchored double-ended tuning forks, were fabricated from 2.5??m thick in-situ boron doped nanocrystalline diamond films deposited using hot filament chemical vapor deposition. Thermal conductivity measured by time-domain thermoreflectance resulted in 24?±?3?W m{sup ?1} K{sup ?1} for heat transport through the thickness of the diamond film. The resonant frequencies of the fabricated resonators were 46?kHz–8?MHz and showed a maximum measured Q???86?000 at f{sub n}?=?46.849?kHz. The measured Q-factors are shown to be in good agreement with the limit imposed by thermoelastic dissipation calculated using the measured thermal conductivity. The mechanical properties extracted from resonant frequency measurements indicate a Young's elastic modulus of ?788?GPa, close to that of microcrystalline diamond.

  19. Graphene-on-Diamond Devices with Increased Current-Carrying Capacity: Carbon sp2

    E-Print Network [OSTI]

    Graphene-on-Diamond Devices with Increased Current-Carrying Capacity: Carbon sp2 -on-sp3 Technology Laboratory, Illinois 60439, United States *S Supporting Information ABSTRACT: Graphene demonstrated potential for practical applications owing to its excellent electronic and thermal properties. Typical graphene field

  20. Atomistic modeling of the fracture of polycrystalline diamond O. A. Shenderova and D. W. Brenner

    E-Print Network [OSTI]

    Brenner, Donald W.

    Atomistic modeling of the fracture of polycrystalline diamond O. A. Shenderova and D. W. Brenner for fracture, maximum stresses and strains, and toughness as a function of GB type are evaluated. Results With strength values ranging between 180 and 5190 MPa, and fracture toughness between 5.3 and 8 MN m 3/2 ,1

  1. Growth of diamond nanocrystals by pulsed laser ablation of graphite in liquid , P.W. May a,, L. Yin b

    E-Print Network [OSTI]

    Bristol, University of

    Elsevier B.V. All rights reserved. Keywords: Diamond; Pulsed laser ablation; Nanoparticles; Nanodiamond 1 materials to be created [4,5]. The conditions inside the bubbles are similar to the cavitation bubbles

  2. Systematic studies of the nucleation and growth of ultrananocrystalline diamond films on silicon substrates coated with a tungsten layer

    SciTech Connect (OSTI)

    Chu, Yueh-Chieh; Jiang, Gerald; Tu, Chia-Hao; Chang Chi; Liu, Chuan-pu; Ting, Jyh-Ming; Lee, Hsin-Li; Tzeng, Yonhua; Auciello, Orlando

    2012-06-15

    We report on effects of a tungsten layer deposited on silicon surface on the effectiveness for diamond nanoparticles to be seeded for the deposition of ultrananocrystalline diamond (UNCD). Rough tungsten surface and electrostatic forces between nanodiamond seeds and the tungsten surface layer help to improve the adhesion of nanodiamond seeds on the tungsten surface. The seeding density on tungsten coated silicon thus increases. Tungsten carbide is formed by reactions of the tungsten layer with carbon containing plasma species. It provides favorable (001) crystal planes for the nucleation of (111) crystal planes by Microwave Plasma Enhanced Chemical Vapor Deposition (MPECVD) in argon diluted methane plasma and further improves the density of diamond seeds/nuclei. UNCD films grown at different gas pressures on tungsten coated silicon which is pre-seeded by nanodiamond along with heteroepitaxially nucleated diamond nuclei were characterized by Raman scattering, field emission-scanning electron microscopy, and high resolution-transmission electron microscopy.

  3. Development and evaluation of operational strategies for providing an integrated diamond interchange ramp-metering control system 

    E-Print Network [OSTI]

    Tian, Zongzhong

    2004-09-30

    Diamond interchanges and their associated ramps are where the surface street arterial system and the freeway system interface. Historically, these two elements of the system have been operated with little or no coordination between the two...

  4. An adaptive grid refinement strategy for the simulation of negative streamers

    SciTech Connect (OSTI)

    Montijn, C. . E-mail: carolynne.montijn@cwi.nl; Hundsdorfer, W. . E-mail: willem.hundsdorfer@cwi.nl; Ebert, U. . E-mail: ute.ebert@cwi.nl

    2006-12-10

    The evolution of negative streamers during electric breakdown of a non-attaching gas can be described by a two-fluid model for electrons and positive ions. It consists of continuity equations for the charged particles including drift, diffusion and reaction in the local electric field, coupled to the Poisson equation for the electric potential. The model generates field enhancement and steep propagating ionization fronts at the tip of growing ionized filaments. An adaptive grid refinement method for the simulation of these structures is presented. It uses finite volume spatial discretizations and explicit time stepping, which allows the decoupling of the grids for the continuity equations from those for the Poisson equation. Standard refinement methods in which the refinement criterion is based on local error monitors fail due to the pulled character of the streamer front that propagates into a linearly unstable state. We present a refinement method which deals with all these features. Tests on one-dimensional streamer fronts as well as on three-dimensional streamers with cylindrical symmetry (hence effectively 2D for numerical purposes) are carried out successfully. Results on fine grids are presented, they show that such an adaptive grid method is needed to capture the streamer characteristics well. This refinement strategy enables us to adequately compute negative streamers in pure gases in the parameter regime where a physical instability appears: branching streamers.

  5. Refining: moods and modes for 1984. [From NPRA meeting, San Antonio, TX 3/84

    SciTech Connect (OSTI)

    Not Available

    1984-04-11

    Thousands of refining experts met in March in San Antonio, TX at the 82nd meeting of the National Petroleum Refiners Association, including many international oil-industry officials and executives. For major US refiners, the mood was decidedly optimistic, because: (1) for a number of refiners, negative margins on many crude oils that persisted even after the March 1983 price adjustment by OPEC are finally improving as capacities for upgrading residual fuel into more-valuable light products continue to come onstream; and (2) multinational oil companies, while concerned about downstream market penetration by producing countries, nevertheless expressed the feeling that this would probably further reduce the negotiating power of OPEC. For smaller, nonmajor refiners, the mood was one of concern: in the US, 97 refineries have officially closed since 1981, most of them smaller, inefficient facilities. There was optimism by all about environmental and social concerns, specifically acid rain and lead pollution. For the national oil companies of less-developed countries, a vicious circle emerged concerning the economic ramifications of the continuing development of catalysts for cracking heavy feedstock. This issue presents the fuel price/tax series and industrial fuel prices for March 1984 for countries of the Eastern Hemisphere.

  6. DEVELOPMENT OF ADVANCED DRILL COMPONENTS FOR BHA USING MICROWAVE TECHNOLOGY INCORPORATING CARBIDE, DIAMOND COMPOSITES AND FUNCTIONALLY GRADED MATERIALS

    SciTech Connect (OSTI)

    Dinesh Agrawal; Rustum Roy

    2003-01-01

    The microwave processing of materials is a new emerging technology with many attractive advantages over the conventional methods. The advantages of microwave technology for various ceramic systems has already been demonstrated and proven. The recent developments at Penn State have succeeded in applying the microwave technology for the commercialization of WC/Co and diamond based cutting and drilling tools, effectively sintering of metallic materials, and fabrication of transparent ceramics for advanced applications. In recent years, the Microwave Processing and Engineering Center at Penn State University in collaboration with our industrial partner, Dennis Tool Co. has succeeded in commercializing the developed microwave technology partially funded by DOE for WC/Co and diamond based cutting and drilling tools for gas and oil exploration operations. In this program we have further developed this technology to make diamond-carbide composites and metal-carbide-diamond functionally graded materials. Several actual product of diamond-carbide composites have been processed in microwave with better performance than the conventional product. The functionally graded composites with diamond as one of the components has been for the first time successfully developed. These are the highlights of the project.

  7. Automating crystallographic structure solution and refinement of protein–ligand complexes

    SciTech Connect (OSTI)

    Echols, Nathaniel, E-mail: nechols@lbl.gov; Moriarty, Nigel W., E-mail: nechols@lbl.gov; Klei, Herbert E.; Afonine, Pavel V. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720-8235 (United States); Bunkóczi, Gábor [University of Cambridge, Cambridge Institute for Medical Research, Wellcome Trust/MRC Building, Cambridge CB2 0XY (United Kingdom); Headd, Jeffrey J. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720-8235 (United States); McCoy, Airlie J.; Oeffner, Robert D.; Read, Randy J. [University of Cambridge, Cambridge Institute for Medical Research, Wellcome Trust/MRC Building, Cambridge CB2 0XY (United Kingdom); Terwilliger, Thomas C. [Los Alamos National Laboratory, Los Alamos, NM 87545-0001 (United States); Adams, Paul D., E-mail: nechols@lbl.gov [Lawrence Berkeley National Laboratory, Berkeley, CA 94720-8235 (United States); University of California at Berkeley, Berkeley, CA 94720-1762 (United States)

    2014-01-01

    A software system for automated protein–ligand crystallography has been implemented in the Phenix suite. This significantly reduces the manual effort required in high-throughput crystallographic studies. High-throughput drug-discovery and mechanistic studies often require the determination of multiple related crystal structures that only differ in the bound ligands, point mutations in the protein sequence and minor conformational changes. If performed manually, solution and refinement requires extensive repetition of the same tasks for each structure. To accelerate this process and minimize manual effort, a pipeline encompassing all stages of ligand building and refinement, starting from integrated and scaled diffraction intensities, has been implemented in Phenix. The resulting system is able to successfully solve and refine large collections of structures in parallel without extensive user intervention prior to the final stages of model completion and validation.

  8. Free kick instead of cross-validation in maximum-likelihood refinement of macromolecular crystal structures

    SciTech Connect (OSTI)

    Pražnikar, Jure [Institute Jožef Stefan, Jamova 39, 1000 Ljubljana (Slovenia); University of Primorska, (Slovenia); Turk, Dušan, E-mail: dusan.turk@ijs.si [Institute Jožef Stefan, Jamova 39, 1000 Ljubljana (Slovenia); Center of Excellence for Integrated Approaches in Chemistry and Biology of Proteins, (Slovenia)

    2014-12-01

    The maximum-likelihood free-kick target, which calculates model error estimates from the work set and a randomly displaced model, proved superior in the accuracy and consistency of refinement of crystal structures compared with the maximum-likelihood cross-validation target, which calculates error estimates from the test set and the unperturbed model. The refinement of a molecular model is a computational procedure by which the atomic model is fitted to the diffraction data. The commonly used target in the refinement of macromolecular structures is the maximum-likelihood (ML) function, which relies on the assessment of model errors. The current ML functions rely on cross-validation. They utilize phase-error estimates that are calculated from a small fraction of diffraction data, called the test set, that are not used to fit the model. An approach has been developed that uses the work set to calculate the phase-error estimates in the ML refinement from simulating the model errors via the random displacement of atomic coordinates. It is called ML free-kick refinement as it uses the ML formulation of the target function and is based on the idea of freeing the model from the model bias imposed by the chemical energy restraints used in refinement. This approach for the calculation of error estimates is superior to the cross-validation approach: it reduces the phase error and increases the accuracy of molecular models, is more robust, provides clearer maps and may use a smaller portion of data for the test set for the calculation of R{sub free} or may leave it out completely.

  9. Studies on design of a process for organo-refining of coal to obtain super clean coal

    SciTech Connect (OSTI)

    Sharma, C.S.; Sharma, D.K. [Indian Inst. of Tech., New Delhi (India). Centre for Energy Studies

    1999-08-01

    Organo-refining of coal results in refining the coal to obtain super clean coal and residual coal. Super clean coal may be used to obtain value added chemicals, products, and cleaner fuels from coal. In the present work, studies on the design of a semicontinuous process for organo-refining of one ton of coal have been made. The results are reported. This is only a cursory attempt for the design, and further studies may be required for designing this process for use in the development of a scaled-up process of organo-refining of coal.

  10. The atomic structure of the cleaved Si(111)-(2x1) surface refined by dynamical LEED

    E-Print Network [OSTI]

    2004-01-01

    Surface Crystallography by LEED”, p.30, Spinger-Verlag, Bby automated tensor LEED (the number of optimized parametersSurface Refined by Dynamical LEED Geng Xu, Bingcheng Deng,*

  11. Nucleation of diamond by pure carbon ion bombardment--a transmission electron microscopy study

    SciTech Connect (OSTI)

    Yao, Y.; Liao, M.Y.; Wang, Z.G.; Lifshitz, Y.; Lee, S.

    2005-08-08

    A cross-sectional high-resolution transmission electron microscopy (HRTEM) study of a film deposited by a 1 keV mass-selected carbon ion beam onto silicon held at 800 deg. C is presented. Initially, a graphitic film with its basal planes perpendicular to the substrate is evolving. The precipitation of nanodiamond crystallites in upper layers is confirmed by HRTEM, selected area electron diffraction, and electron energy loss spectroscopy. The nucleation of diamond on graphitic edges as predicted by Lambrecht et al. [W. R. L. Lambrecht, C. H. Lee, B. Segall, J. C. Angus, Z. Li, and M. Sunkara, Nature, 364 607 (1993)] is experimentally confirmed. The results are discussed in terms of our recent subplantation-based diamond nucleation model.

  12. Low-temperature electrical transport in B-doped ultrananocrystalline diamond film

    SciTech Connect (OSTI)

    Li, Lin; Zhao, Jing; Hu, Zhaosheng; Quan, Baogang; Li, Junjie Gu, Changzhi

    2014-05-05

    B-doped ultrananocrystalline diamond (UNCD) films are grown using hot-filament chemical vapor deposition method, and their electrical transport properties varying with temperature are investigated. When the B-doped concentration of UNCD film is low, a step-like increase feature of the resistance is observed with decreasing temperature, reflecting at least three temperature-modified electronic state densities at the Fermi level according to three-dimensional Mott's variable range hopping transport mechanism, which is very different from that of reported B-doped nanodiamond. With increasing B-doped concentration, a superconductive transformation occurs in the UNCD film and the highest transformation temperature of 5.3?K is observed, which is higher than that reported for superconducting nanodiamond films. In addition, the superconducting coherence length is about 0.63?nm, which breaks a reported theoretical and experimental prediction about ultra-nanoscale diamond's superconductivity.

  13. Performance of a beam-multiplexing diamond crystal monochromator at the Linac Coherent Light Source

    SciTech Connect (OSTI)

    Zhu, Diling, E-mail: dlzhu@slac.stanford.edu; Feng, Yiping; Lemke, Henrik T.; Fritz, David M.; Chollet, Matthieu; Glownia, J. M.; Alonso-Mori, Roberto; Sikorski, Marcin; Song, Sanghoon; Williams, Garth J.; Messerschmidt, Marc; Boutet, Sébastien; Robert, Aymeric [Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Stoupin, Stanislav; Shvyd'ko, Yuri V. [Advanced Photon Source, Argonne National Laboratory, Lemont, Illinois 60439 (United States); Terentyev, Sergey A.; Blank, Vladimir D. [Technological Institute of Superhard and Novel Carbon Materials, Tsentralnaya str. 7a, Troitsk, Moscow 142190 (Russian Federation); Driel, Tim B. van [Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Center for Molecular Movies, Department of Physics, Technical University of Denmark, DK-2800 Lyngby (Denmark)

    2014-06-15

    A double-crystal diamond monochromator was recently implemented at the Linac Coherent Light Source. It enables splitting pulses generated by the free electron laser in the hard x-ray regime and thus allows the simultaneous operations of two instruments. Both monochromator crystals are High-Pressure High-Temperature grown type-IIa diamond crystal plates with the (111) orientation. The first crystal has a thickness of ?100 ?m to allow high reflectivity within the Bragg bandwidth and good transmission for the other wavelengths for downstream use. The second crystal is about 300 ?m thick and makes the exit beam of the monochromator parallel to the incoming beam with an offset of 600 mm. Here we present details on the monochromator design and its performance.

  14. Design and manufacture of micro-optical arrays using 3D diamond machining techniques

    E-Print Network [OSTI]

    Juergen Schmoll; David J. Robertson; David A. Ryder

    2006-06-07

    We describe our work towards the manufacture of micro-optical arrays using freeform diamond machining techniques. Simulations have been done to show the feasibility of manufacturing micro-lens arrays using the slow-tool servo method. Using this technique, master shapes can be produced for replication of micro-lens arrays of either epoxy-on-glass or monolthic glass types. A machine tool path programme has been developed on the machine software platform DIFFSYS, allowing the production of spherical, aspherical and toric arrays. In addition, in theory spatially varying lenslets, sparse arrays and dithered lenslet arrays (for high contrast applications) are possible to produce. In practice, due to the diamond tool limitations not all formats are feasible. Investigations into solving this problem have been carried out and a solution is presented here.

  15. Efficient graphite ring heater suitable for diamond-anvil cells to 1300 K

    SciTech Connect (OSTI)

    Du Zhixue; Amulele, George; Lee, Kanani K. M.; Miyagi, Lowell

    2013-02-15

    In order to generate homogeneous high temperatures at high pressures, a ring-shaped graphite heater has been developed to resistively heat diamond-anvil cell (DAC) samples up to 1300 K. By putting the heater in direct contact with the diamond anvils, this graphite heater design features the following advantages: (1) efficient heating: sample can be heated to 1300 K while the DAC body temperature remains less than 800 K, eliminating the requirement of a special alloy for the DAC; (2) compact design: the sample can be analyzed with in situ measurements, e.g., x-ray, optical, and electrical probes are possible. In particular, the side access of the heater allows for radial x-ray diffraction (XRD) measurements in addition to traditional axial XRD.

  16. Diamond pixel detector for beam profile monitoring in COMET experiment at J-PARC

    E-Print Network [OSTI]

    M. Cerv; P. Sarin; H. Pernegger; P. Vageesvaran; E. Griesmayer

    2014-11-15

    We present the design and initial prototype results of a pixellized proton beam profile monitor for the COMET experiment at J-PARC. The goal of COMET is to look for charged lepton flavor violation by direct muon to electron conversion at a sensitivity of $0^{-19}$. An 8 GeV proton beam pulsed at 100 ns with $10^{10}$ protons/s will be used to create muons through pion production and decay. In the final experiment, the proton flux will be raised to $10^{14}$ protons/sec to increase the sensitivity. These requirements of harsh radiation tolerance and fast readout make diamond a good choice for constructing a beam profile monitor in COMET. We present first results of the characterization of single crystal diamond (scCVD) sourced from a new company, 2a systems Singapore. Our measurements indicate excellent charge collection efficiency and high carrier mobility down to cryogenic temperatures.

  17. Liquid-liquid extraction as the means of refining cottonseed oil 

    E-Print Network [OSTI]

    Patel, Manubhai Chunibhai

    1956-01-01

    LIBRARY A 4 AI CvLLEGE OF TEXAS LIOVID-LIQUID EXTRACTION AS THE MEANS OI REFINING CCTTONSEFZ OIL A Thesis By 1'RVUBHAI CHIINIBHAI PATEL a 0 U z A R 0 Submitted to the Graduate School of the Agricultural and Mechanical College of Texas... in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Auuust 1996 Major Subject Chemical ineeri LIQUID-LIQUID EXTRACTION AS THE MEANS OF REFINING COTTONSEED OIL A Thesis By MANUBHAI CHUNIBHAI PATEL Approved as to style...

  18. Laser generation and detection of longitudinal and shear acoustic waves in a diamond anvil cell

    SciTech Connect (OSTI)

    Chigarev, Nikolay; Zinin, Pavel; Ming Lichung; Amulele, George; Bulou, Alain; Gusev, Vitalyi

    2008-11-03

    Laser ultrasonics in a point-source-point-receiver configuration is applied for the evaluation of elastic properties of nontransparent materials in a diamond anvil cell at high pressures. Measurement of both longitudinal and shear acoustic wave velocities in an iron foil at pressures up to 23 GPa does not require any information in addition to the one obtained by all-optical pump-probe technique.

  19. The Ramsey number of diamond-matchings and loose cycles in hypergraphs

    E-Print Network [OSTI]

    Sarkozy, Gabor

    The Ramsey number of diamond-matchings and loose cycles in hypergraphs Andr´as Gy´arf´as Computer Abstract The 2-color Ramsey number R(C3 n, C3 n) of a 3-uniform loose cycle Cn is asymp- totic to 5n/4 extend their result to the r-uniform case by show- ing that the corresponding Ramsey number is asymptotic

  20. US Synthetic Corp (TRL 4 Component)- The Development of Open, Water Lubricated Polycrystalline Diamond Thrust Bearings for use in Marine Hydrokinetic (MHK) Energy Machines

    Broader source: Energy.gov [DOE]

    US Synthetic Corp (TRL 4 Component) - The Development of Open, Water Lubricated Polycrystalline Diamond Thrust Bearings for use in Marine Hydrokinetic (MHK) Energy Machines

  1. Test of a prototype neutron spectrometer based on diamond detectors in a fast reactor

    E-Print Network [OSTI]

    M. Osipenko; F. Pompili; M. Ripani; M. Pillon; G. Ricco; B. Caiffi; R. Cardarelli; G. Verona-Rinati; S. Argiro

    2015-05-23

    A prototype of neutron spectrometer based on diamond detectors has been developed. This prototype consists of a $^6$Li neutron converter sandwiched between two CVD diamond crystals. The radiation hardness of the diamond crystals makes it suitable for applications in low power research reactors, while a low sensitivity to gamma rays and low leakage current of the detector permit to reach good energy resolution. A fast coincidence between two crystals is used to reject background. The detector was read out using two different electronic chains connected to it by a few meters of cable. The first chain was based on conventional charge-sensitive amplifiers, the other used a custom fast charge amplifier developed for this purpose. The prototype has been tested at various neutron sources and showed its practicability. In particular, the detector was calibrated in a TRIGA thermal reactor (LENA laboratory, University of Pavia) with neutron fluxes of $10^8$ n/cm$^2$s and at the 3 MeV D-D monochromatic neutron source named FNG (ENEA, Rome) with neutron fluxes of $10^6$ n/cm$^2$s. The neutron spectrum measurement was performed at the TAPIRO fast research reactor (ENEA, Casaccia) with fluxes of 10$^9$ n/cm$^2$s. The obtained spectra were compared to Monte Carlo simulations, modeling detector response with MCNP and Geant4.

  2. Proton recoil telescope based on diamond detectors for measurement of fusion neutrons

    E-Print Network [OSTI]

    B. Caiffi; M. Osipenko; M. Ripani; M. Pillon; M. Taiuti

    2015-05-23

    Diamonds are very promising candidates for the neutron diagnostics in harsh environments such as fusion reactor. In the first place this is because of their radiation hardness, exceeding that of Silicon by an order of magnitude. Also, in comparison to the standard on-line neutron diagnostics (fission chambers, silicon based detectors, scintillators), diamonds are less sensitive to $\\gamma$ rays, which represent a huge background in fusion devices. Finally, their low leakage current at high temperature suppresses the detector intrinsic noise. In this talk a CVD diamond based detector has been proposed for the measurement of the 14 MeV neutrons from D-T fusion reaction. The detector was arranged in a proton recoil telescope configuration, featuring a plastic converter in front of the sensitive volume in order to induce the (n,p) reaction. The segmentation of the sensitive volume, achieved by using two crystals, allowed to perform measurements in coincidence, which suppressed the neutron elastic scattering background. A preliminary prototype was assembled and tested at FNG (Frascati Neutron Generator, ENEA), showing promising results regarding efficiency and energy resolution.

  3. Local and bulk 13C hyperpolarization in NV-centered diamonds at variable fields and orientations

    E-Print Network [OSTI]

    Gonzalo A. Alvarez; Christian O. Bretschneider; Ran Fischer; Paz London; Hisao Kanda; Shinobu Onoda; Junichi Isoya; David Gershoni; Lucio Frydman

    2014-12-30

    Polarizing nuclear spins is of fundamental importance in biology, chemistry and physics. Methods for hyperpolarizing 13C nuclei from free electrons in bulk, usually demand operation at cryogenic temperatures. Room-temperature approaches targeting diamonds with nitrogen-vacancy (NV) centers could alleviate this need, but hitherto proposed strategies lack generality as they demand stringent conditions on the strength and/or alignment of the magnetic field. We report here an approach for achieving efficient electron->13C spin alignment transfers, compatible with a broad range of magnetic field strengths and field orientations with respect to the diamond crystal. This versatility results from combining coherent microwave- and incoherent laser-induced transitions between selected energy states of the coupled electron-nuclear spin manifold. 13C-detected Nuclear Magnetic Resonance (NMR) experiments demonstrate that this hyperpolarization can be transferred via first-shell or via distant 13Cs, throughout the nuclear bulk ensemble. This method opens new perspectives for applications of diamond NV centers in NMR, and in quantum information processing.

  4. Visualization of expanding warm dense gold and diamond heated rapidly by laser-generated ion beams

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bang, W.; Albright, B. J.; Bradley, P. A.; Gautier, D. C.; Palaniyappan, S.; Vold, E. L.; Cordoba, M. A. Santiago; Hamilton, C. E.; Fernández, J. C.

    2015-09-22

    With the development of several novel heating sources, scientists can now heat a small sample isochorically above 10,000 K. Although matter at such an extreme state, known as warm dense matter, is commonly found in astrophysics (e.g., in planetary cores) as well as in high energy density physics experiments, its properties are not well understood and are difficult to predict theoretically. This is because the approximations made to describe condensed matter or high-temperature plasmas are invalid in this intermediate regime. A sufficiently large warm dense matter sample that is uniformly heated would be ideal for these studies, but has beenmore »unavailable to date. We have used a beam of quasi-monoenergetic aluminum ions to heat gold and diamond foils uniformly and isochorically. For the first time, we visualized directly the expanding warm dense gold and diamond with an optical streak camera. Furthermore, we present a new technique to determine the initial temperature of these heated samples from the measured expansion speeds of gold and diamond into vacuum. We anticipate the uniformly heated solid density target will allow for direct quantitative measurements of equation-of-state, conductivity, opacity, and stopping power of warm dense matter, benefiting plasma physics, astrophysics, and nuclear physics.« less

  5. Direct observation of electron emission from the grain boundaries of chemical vapour deposition diamond films by tunneling atomic force microscopy

    SciTech Connect (OSTI)

    Chatterjee, Vijay; Harniman, Robert; May, Paul W.; Barhai, P. K.

    2014-04-28

    The emission of electrons from diamond in vacuum occurs readily as a result of the negative electron affinity of the hydrogenated surface due to features with nanoscale dimensions, which can concentrate electric fields high enough to induce electron emission from them. Electrons can be emitted as a result of an applied electric field (field emission) with possible uses in displays or cold-cathode devices. Alternatively, electrons can be emitted simply by heating the diamond in vacuum to temperatures as low as 350?°C (thermionic emission), and this may find applications in solar energy generation or energy harvesting devices. Electron emission studies usually use doped polycrystalline diamond films deposited onto Si or metallic substrates by chemical vapor deposition, and these films have a rough, faceted morphology on the micron or nanometer scale. Electron emission is often improved by patterning the diamond surface into sharp points or needles, the idea being that the field lines concentrate at the points lowering the barrier for electron emission. However, there is little direct evidence that electrons are emitted from these sharp tips. The few reports in the literature that have studied the emission sites suggested that emission came from the grain boundaries and not the protruding regions. We now present direct observation of the emission sites over a large area of polycrystalline diamond using tunneling atomic force microscopy. We confirm that the emission current comes mostly from the grain boundaries, which is consistent with a model for emission in which the non-diamond phase is the source of electrons with a threshold that is determined by the surrounding hydrogenated diamond surface.

  6. Classification of remotely sensed imagery using stochastic gradient boosting as a refinement of classification tree analysis

    E-Print Network [OSTI]

    Lawrence, Rick L.

    trees) are increasingly being used for analysis and classification of remotely sensed digital imageryClassification of remotely sensed imagery using stochastic gradient boosting as a refinement of classification tree analysis Rick Lawrencea,*, Andrew Bunna , Scott Powellb , Michael Zambona a Department

  7. Iterative model building, structure refinement and density modification with the PHENIX AutoBuild wizard

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545 (United States); Grosse-Kunstleve, Ralf W.; Afonine, Pavel V.; Moriarty, Nigel W.; Zwart, Peter H. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Hung, Li-Wei [Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545 (United States); Read, Randy J. [Department of Haematology, University of Cambridge, Cambridge CB2 0XY (United Kingdom); Adams, Paul D., E-mail: terwilliger@lanl.gov [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545 (United States)

    2008-01-01

    The highly automated PHENIX AutoBuild wizard is described. The procedure can be applied equally well to phases derived from isomorphous/anomalous and molecular-replacement methods. The PHENIX AutoBuild wizard is a highly automated tool for iterative model building, structure refinement and density modification using RESOLVE model building, RESOLVE statistical density modification and phenix.refine structure refinement. Recent advances in the AutoBuild wizard and phenix.refine include automated detection and application of NCS from models as they are built, extensive model-completion algorithms and automated solvent-molecule picking. Model-completion algorithms in the AutoBuild wizard include loop building, crossovers between chains in different models of a structure and side-chain optimization. The AutoBuild wizard has been applied to a set of 48 structures at resolutions ranging from 1.1 to 3.2 Å, resulting in a mean R factor of 0.24 and a mean free R factor of 0.29. The R factor of the final model is dependent on the quality of the starting electron density and is relatively independent of resolution.

  8. Iterative model-building, structure refinement, and density modification with the PHENIX AutoBuild Wizard

    SciTech Connect (OSTI)

    Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545, USA; Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720, USA; Department of Haematology, University of Cambridge, Cambridge CB2 0XY, England; Terwilliger, Thomas; Terwilliger, T.C.; Grosse-Kunstleve, Ralf Wilhelm; Afonine, P.V.; Moriarty, N.W.; Zwart, P.H.; Hung, L.-W.; Read, R.J.; Adams, P.D.

    2007-04-29

    The PHENIX AutoBuild Wizard is a highly automated tool for iterative model-building, structure refinement and density modification using RESOLVE or TEXTAL model-building, RESOLVE statistical density modification, and phenix.refine structure refinement. Recent advances in the AutoBuild Wizard and phenix.refine include automated detection and application of NCS from models as they are built, extensive model completion algorithms, and automated solvent molecule picking. Model completion algorithms in the AutoBuild Wizard include loop-building, crossovers between chains in different models of a structure, and side-chain optimization. The AutoBuild Wizard has been applied to a set of 48 structures at resolutions ranging from 1.1 {angstrom} to 3.2 {angstrom}, resulting in a mean R-factor of 0.24 and a mean free R factor of 0.29. The R-factor of the final model is dependent on the quality of the starting electron density, and relatively independent of resolution.

  9. OPERATOR INTERACTION WITH MODEL-BASED PREDICTIVE CONTROLLERS IN PETROCHEMICAL REFINING

    E-Print Network [OSTI]

    Virginia, University of

    OPERATOR INTERACTION WITH MODEL-BASED PREDICTIVE CONTROLLERS IN PETROCHEMICAL REFINING Greg A in process control to the more thoroughly studied Flight Management System (FMS) employed in airline cockpits and challenging task. Keywords: Cognitive task analysis; Process control; Predictive control; Optimization

  10. Industrial Ecology and LCA, Instructor Iddo Wernick Fall 2014 Syllabus (subject to refinement/updating)

    E-Print Network [OSTI]

    Wolberg, George

    Industrial Ecology and LCA, Instructor Iddo Wernick Fall 2014 Syllabus (subject to refinement/updating) 1 SUS-7300C INDUSTRIAL ECOLOGY AND LIFE CYCLE ANALYSIS Description: Students will be introduced to the purpose, philosophy, and applications of Industrial Ecology as they affect environmental and urban

  11. A TWODIMENSIONAL MOVING FINITE ELEMENT METHOD WITH LOCAL REFINEMENT BASED ON A POSTERIORI ERROR

    E-Print Network [OSTI]

    Cao, Weiming

    and Flaherty [1] to the two­dimensional case, where clusters of mesh points are built up and moved (middle), and rh­refinement with N = 541 yields e L2() = 1.57E-2 (right). While the r­method wastes too

  12. The Nekrasov-Okounkov hook length formula: refinement, elementary proof, extension and applications

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2008/05/09 The Nekrasov-Okounkov hook length formula: refinement, elementary proof, extension and applications Guo-Niu HAN ABSTRACT. -- The paper is devoted to the derivation of the expan- sion formula function for t-cores. Several applications are derived, including the "marked hook formula". 1

  13. Three Dimensional Adaptive Mesh Refinement on a Spherical Shell for Atmospheric Models with Lagrangian Coordinates

    E-Print Network [OSTI]

    Jablonowski, Christiane

    Three Dimensional Adaptive Mesh Refinement on a Spherical Shell for Atmospheric Models for Atmospheric Research 1. Introduction One of the most important advances needed in global climate models of this project is a parallel adaptive grid library, which is currently under development at the University

  14. An Incremental Refining Spatial Join Algorithm for Estimating Query Results in GIS

    E-Print Network [OSTI]

    Leutenegger, Scott T.

    An Incremental Refining Spatial Join Algorithm for Estimating Query Results in GIS Wan D. Bae systems (GIS) must support large georeferenced data sets. Due to the size of these data sets finding ex this is the first work using this approach in GIS. We investigate different sampling method- ologies and evaluate

  15. Sustainable Soil and Water, Adjunct Professor Marcha Johnson Spring 2014 Syllabus (subject to refinement/updating)

    E-Print Network [OSTI]

    Wolberg, George

    Sustainable Soil and Water, Adjunct Professor Marcha Johnson Spring 2014 Syllabus (subject to refinement/updating) 1 Spring 2014 SUS- 7700A: SUSTAINABLE SOIL AND WATER Course: Sustainable Soil and Water water, and groundwater in urban settings; understanding floodplains; treating polluted brownfields

  16. Environmental Regulations and Changes in Petroleum Refining Operations (Released in the STEO June 1998)

    Reports and Publications (EIA)

    1998-01-01

    Changes in domestic refining operations are identified and related to the summer Reid vapor pressure (RVP) restrictions and oxygenate blending requirements. This analysis uses published Energy Information Administration survey data and linear regression equations from the Short-Term Integrated Forecasting System (STIFS). The STIFS model is used for producing forecasts appearing in the Short-Term Energy Outlook.

  17. Verification of Hybrid Systems Based on Counterexample-Guided Abstraction Refinement

    E-Print Network [OSTI]

    Clarke, Edmund M.

    verification, abstraction transforms the inherently infinite state system into a finite-state model [7Verification of Hybrid Systems Based on Counterexample-Guided Abstraction Refinement Edmund Clarke1 generated by the model checker. For hybrid systems, analysis of the counterexample requires the computation

  18. Verification of Hybrid Systems Based on CounterexampleGuided Abstraction Refinement ?

    E-Print Network [OSTI]

    Theobald, Michael

    verification, abstraction transforms the inherently infinite state system into a finite­state model [7, 8Verification of Hybrid Systems Based on Counterexample­Guided Abstraction Refinement ? Edmund that eliminates a counterexample generated by the model checker. For hybrid systems, analy­ sis

  19. Federal/Industry Development of Energy-Conserving Technologies for the Chemical and Petroleum Refining Industries 

    E-Print Network [OSTI]

    Alston, T. G.; Humphrey, J. L.

    1981-01-01

    Argonne National Laboratory has started a program to identify future RD&D projects that (i) promise cost-effective savings of scarce fuels in the chemical and petroleum refining industries, (ii) are not likely to be pursued by industry alone...

  20. Abstracting and Refining Authorization in SQL Arnon Rosenthal, Edward Sciore1

    E-Print Network [OSTI]

    Sciore, Edward

    Abstracting and Refining Authorization in SQL Arnon Rosenthal, Edward Sciore1 Abstract. The SQL and dangerous to change. To make the model easier to work with, we formalize the implicit principles behind SQL solve several administrative problems with existing SQL security. This sort of abstraction is also

  1. Protein NMR Structures Refined with Rosetta Have Higher Accuracy Relative to Corresponding Xray Crystal Structures

    E-Print Network [OSTI]

    Baker, David

    refinement of protein NMR structures was also compared with restrained CS-Rosetta calculations. For proteins spectroscopy (NMR). While X-ray crystal structures are derived from electron density data and are often dynamics and has the advantage of not requiring crystallization. Solution NMR structure determination

  2. Tools for macromolecular model building and refinement into electron cryo-microscopy reconstructions

    SciTech Connect (OSTI)

    Brown, Alan; Long, Fei; Nicholls, Robert A.; Toots, Jaan; Emsley, Paul; Murshudov, Garib, E-mail: garib@mrc-lmb.cam.ac.uk [MRC Laboratory of Molecular Biology, Francis Crick Avenue, Cambridge CB2 0QH (United Kingdom)

    2015-01-01

    A description is given of new tools to facilitate model building and refinement into electron cryo-microscopy reconstructions. The recent rapid development of single-particle electron cryo-microscopy (cryo-EM) now allows structures to be solved by this method at resolutions close to 3 Å. Here, a number of tools to facilitate the interpretation of EM reconstructions with stereochemically reasonable all-atom models are described. The BALBES database has been repurposed as a tool for identifying protein folds from density maps. Modifications to Coot, including new Jiggle Fit and morphing tools and improved handling of nucleic acids, enhance its functionality for interpreting EM maps. REFMAC has been modified for optimal fitting of atomic models into EM maps. As external structural information can enhance the reliability of the derived atomic models, stabilize refinement and reduce overfitting, ProSMART has been extended to generate interatomic distance restraints from nucleic acid reference structures, and a new tool, LIBG, has been developed to generate nucleic acid base-pair and parallel-plane restraints. Furthermore, restraint generation has been integrated with visualization and editing in Coot, and these restraints have been applied to both real-space refinement in Coot and reciprocal-space refinement in REFMAC.

  3. Refinement of weed risk assessments for biofuels using Camelina sativa as a model species

    E-Print Network [OSTI]

    Lawrence, Rick L.

    Refinement of weed risk assessments for biofuels using Camelina sativa as a model species Philip B and Environmental Sciences, Montana State University, PO Box 173120, Bozeman, MT 59717-3120, USA Summary 1. Biofuel. However, concerns have been raised on the invasiveness of biofuel feedstocks. Estimating invasion

  4. EIS-0069: Solvent Refined Coal-II Demonstration Project, Fort Martin, Monongalia County, West Virginia

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy developed this statement to assess the potential environmental, economic and social impacts associated with the construction and short-term operation of a 6,000-tons-per-stream-day-capacity facility that will demonstrate the technical operability, economic viability, and environmental acceptability of the solvent refined coal process at Fort Martin, West Virginia.

  5. Nonrigid Motion Analysis Based on Dynamic Refinement of Finite Element Models

    E-Print Network [OSTI]

    Sarkar, Sudeep

    Nonrigid Motion Analysis Based on Dynamic Refinement of Finite Element Models Leonid V. Tsap finite element models. The method is based on the iterative analysis of the differences betweenÐPhysically-based vision, deformable models, nonrigid motion analysis, biomedical applications, finite element analysis. æ

  6. Quantitative Methods for Strategic and Investment Planning in the Oil-Refining

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Quantitative Methods for Strategic and Investment Planning in the Oil-Refining Brenno C(ng ­ March 2013 What, Where, When to Invest? Only op*mize streams transfers (fuel;Current Investment Planning Methodology in PETROBRAS Strategy - Increase the supply

  7. JOURNAL OF COMPUTATIONAL PHYSICS accepted Adaptive Mesh Refinement for Singular Current Sheets

    E-Print Network [OSTI]

    Grauer, Rainer

    with simple scaling assumptions. As expected, adaptive mesh refinement shows to be very efficient for studying community. Since mathemat­ ically only very little is known [1], one has to rely on numerical simulations treatment is limited very soon by the computer memory available, resulting in a resolution of less than 512

  8. 356 IEEE TRANSACTIONS ON SOFTWARE ENGINEERING, VOL. 21, NO. 4, APRIL 1995 Correct Architecture Refinement

    E-Print Network [OSTI]

    van der Hoek, André

    356 IEEE TRANSACTIONS ON SOFTWARE ENGINEERING, VOL. 21, NO. 4, APRIL 1995 Correct Architecture for the stepwise refinement of an abstract architecture into a relatively correct lower level architecture that provides a routine solution to a standard architectural design problem. A pattern contains an abstract

  9. A Refined Model of the Prototypical Salmonella SPI-1 T3SS Basal Body Reveals the Molecular Basis for Its

    E-Print Network [OSTI]

    Baker, David

    A Refined Model of the Prototypical Salmonella SPI-1 T3SS Basal Body Reveals the Molecular Basis report the crystal structures of three domains of the prototypical Salmonella SPI-1 basal body, and use) A Refined Model of the Prototypical Salmonella SPI-1 T3SS Basal Body Reveals the Molecular Basis for Its

  10. Design of microcavities in diamond-based photonic crystals by Fourier- and real-space analysis of cavity fields

    E-Print Network [OSTI]

    Janine Riedrich-Möller; Elke Neu; Christoph Becher

    2010-01-04

    We present the design of two-dimensional photonic crystal microcavities in thin diamond membranes well suited for coupling of color centers in diamond. By comparing simulated and ideal field distributions in Fourier and real space and by according modification of air hole positions and size, we optimize the cavity structure yielding high quality factors up to Q = 320000 with a modal volume of V = 0.35 (lambda/n)^3. Using the very same approach we also improve previous designs of a small modal volume microcavity in silicon, gaining a factor of 3 in cavity Q. In view of practical realization of photonic crystals in synthetic diamond films, it is necessary to investigate the influence of material absorption on the quality factor. We show that this influence can be predicted by a simple model, replacing time consuming simulations.

  11. Changing structure of the world refining industry: implications for the United States and other major consuming regions

    SciTech Connect (OSTI)

    Not Available

    1985-02-01

    There are five chapters in this publication. Chapter I on refining industry in transition covers refining history highlights, and OPEC's downstream operations. Chapter II on demand for oil and oil products discusses supply and demand for OPEC oil, demand for oil products, historical growth trends, future growth trends and the case of East Asia - emergence of a fuel oil glut. Chapter III on the US and other traditional refining centers begins with an introduction on the structure of refining and continues on to cover the refining industry in OECD countries, USA, Western Europe, Japan, Singapore and Caribbean and closes with some conclusions. Chapter IV is on refining expansions in OPEC and the third World Nations. The following are covered: (1) nations of the Gulf (Saudi Arabia, Kuwait, Iran, Iraq, Bahrain, Qatar, Oman, United Arab Emirates); (2) OPEC members beyond the Gulf (Indonesia, Africa, Libya, Algeria, Nigeria and Gabon, South America, Venezuela); (3) other major exporters (China, Egypt, Malaysia, Mexico); (4) non-OPEC developing countries - trends in the refining sector. The chapter ends with a short summary on capacity prospects and comparative economics. The final chapter has conclusions and recommendations on: price interactions between crude and products; product exports - impact on OPEC's internal; prices and market influence; importers and exporters - decisions; and course of action of the United States. 18 figures, 40 tables.

  12. Nanoimplantation and Purcell enhancement of single NV centers in photonic crystal cavities in diamond

    E-Print Network [OSTI]

    Janine Riedrich-Möller; Sébastien Pezzagna; Jan Meijer; Christoph Pauly; Frank Mücklich; Matthew Markham; Andrew M. Edmonds; Christoph Becher

    2015-03-19

    We present the controlled creation of single nitrogen-vacancy (NV) centers via ion implantation at the center of a photonic crystal cavity which is fabricated in an ultrapure, single crystal diamond membrane. High-resolution placement of NV centers is achieved using collimation of a 5keV-nitrogen ion beam through a pierced tip of an atomic force microscope (AFM). We demonstrate coupling of the implanted NV centers' broad band fluorescence to a cavity mode and observe Purcell enhancement of the spontaneous emission. The results are in good agreement with a master equation model for the cavity coupling.

  13. Pretreatment process for forming a smooth surface diamond film on a carbon-coated substrate

    DOE Patents [OSTI]

    Feng, Z.; Brewer, M.; Brown, I.; Komvopoulos, K.

    1994-05-03

    A process is disclosed for the pretreatment of a carbon-coated substrate to provide a uniform high density of nucleation sites thereon for the subsequent deposition of a continuous diamond film without the application of a bias voltage to the substrate. The process comprises exposing the carbon-coated substrate, in a microwave plasma enhanced chemical vapor deposition system, to a mixture of hydrogen-methane gases, having a methane gas concentration of at least about 4% (as measured by partial pressure), while maintaining the substrate at a pressure of about 10 to about 30 Torr during the pretreatment. 6 figures.

  14. Fabrication of triangular nanobeam waveguide networks in bulk diamond using single-crystal silicon hard masks

    SciTech Connect (OSTI)

    Bayn, I.; Mouradian, S.; Li, L.; Goldstein, J. A.; Schröder, T.; Zheng, J.; Chen, E. H.; Gaathon, O.; Englund, Dirk; Lu, M.; Stein, A.; Ruggiero, C. A.; Salzman, J.; Kalish, R.

    2014-11-24

    A scalable approach for integrated photonic networks in single-crystal diamond using triangular etching of bulk samples is presented. We describe designs of high quality factor (Q?=?2.51?×?10{sup 6}) photonic crystal cavities with low mode volume (V{sub m}?=?1.062?×?(?/n){sup 3}), which are connected via waveguides supported by suspension structures with predicted transmission loss of only 0.05?dB. We demonstrate the fabrication of these structures using transferred single-crystal silicon hard masks and angular dry etching, yielding photonic crystal cavities in the visible spectrum with measured quality factors in excess of Q?=?3?×?10{sup 3}.

  15. Chip-Scale Nanofabrication of Single Spins and Spin Arrays in Diamond

    SciTech Connect (OSTI)

    Toyli, David M.; Weis, Christoph D.; Fuchs, D.; Schenkel, Thomas; Awschalom, David D.

    2010-07-02

    We demonstrate a technique to nanofabricate nitrogen vacancy (NV) centers in diamond based on broad-beam nitrogen implantation through apertures in electron beam lithography resist. This method enables high-throughput nanofabrication of single NV centers on sub-100-nm length scales. Secondary ion mass spectroscopy measurements facilitate depth profiling of the implanted nitrogen to provide three-dimensional characterization of the NV center spatial distribution. Measurements of NV center coherence with on-chip coplanar waveguides suggest a pathway for incorporating this scalable nanofabrication technique in future quantum applications.

  16. Possible Diamond-Like Nanoscale Structures Induced by Slow Highly-Charged Ions on Graphite (HOPG)

    SciTech Connect (OSTI)

    Sideras-Haddad, E.; Schenkel, T.; Shrivastava, S.; Makgato, T.; Batra, A.; Weis, C. D.; Persaud, A.; Erasmus, R.; Mwakikunga, B.

    2009-01-06

    The interaction between slow highly-charged ions (SHCI) of different charge states from an electron-beam ion trap and highly oriented pyrolytic graphite (HOPG) surfaces is studied in terms of modification of electronic states at single-ion impact nanosizeareas. Results are presented from AFM/STM analysis of the induced-surface topological features combined with Raman spectroscopy. I-V characteristics for a number of different impact regions were measured with STM and the results argue for possible formation of diamond-like nanoscale structures at the impact sites.

  17. Addressing a single spin in diamond with a macroscopic dielectric microwave cavity

    SciTech Connect (OSTI)

    Le Floch, J.-M.; Tobar, M. E.; Bradac, C.; Nand, N.; Volz, T.; Castelletto, S.

    2014-09-29

    We present a technique for addressing single nitrogen-vacancy (NV) center spins in diamond over macroscopic distances using a tunable dielectric microwave cavity. We demonstrate optically detected magnetic resonance (ODMR) for a single negatively charged NV center (NV{sup –}) in a nanodiamond (ND) located directly under the macroscopic microwave cavity. By moving the cavity relative to the ND, we record the ODMR signal as a function of position, mapping out the distribution of the cavity magnetic field along one axis. In addition, we argue that our system could be used to determine the orientation of the NV{sup –} major axis in a straightforward manner.

  18. Cleaning of diamond nanoindentation probes with oxygen plasma and carbon dioxide snow

    SciTech Connect (OSTI)

    Morris, Dylan J. [National Institute of Standards and Technology, Materials Science and Engineering Laboratory, 100 Bureau Drive, Mail Stop 8520, Gaithersburg, Maryland 20899-8520 (United States)

    2009-12-15

    Diamond nanoindentation probes may perform thousands of indentations over years of service life. There is a broad agreement that the probes need frequent cleaning, but techniques for doing so are mostly anecdotes shared between experimentalists. In preparation for the measurement of the shape of a nanoindentation probe by a scanning probe microscope, cleaning by carbon dioxide snow jets and oxygen plasma was investigated. Repeated indentation on a thumbprint-contaminated surface formed a compound that was very resistant to removal by solvents, CO{sub 2} snow, and plasma. CO{sub 2} snow cleaning is found to be a generally effective cleaning procedure.

  19. Pretreatment process for forming a smooth surface diamond film on a carbon-coated substrate

    DOE Patents [OSTI]

    Feng, Zhu (Albany, CA); Brewer, Marilee (Goleta, CA); Brown, Ian (Berkeley, CA); Komvopoulos, Kyriakos (Orinda, CA)

    1994-01-01

    A process is disclosed for the pretreatment of a carbon-coated substrate to provide a uniform high density of nucleation sites thereon for the subsequent deposition of a continuous diamond film without the application of a bias voltage to the substrate. The process comprises exposing the carbon-coated substrate, in a microwave plasma enhanced chemical vapor deposition system, to a mixture of hydrogen-methane gases, having a methane gas concentration of at least about 4% (as measured by partial pressure), while maintaining the substrate at a pressure of about 10 to about 30 Torr during the pretreatment.

  20. Solar-induced chemical vapor deposition of diamond-type carbon films

    DOE Patents [OSTI]

    Pitts, J. Roland (Lakewood, CO); Tracy, C. Edwin (Golden, CO); King, David E. (Lakewood, CO); Stanley, James T. (Beaverton, OR)

    1994-01-01

    An improved chemical vapor deposition method for depositing transparent continuous coatings of sp.sup.3 -bonded diamond-type carbon films, comprising: a) providing a volatile hydrocarbon gas/H.sub.2 reactant mixture in a cold wall vacuum/chemical vapor deposition chamber containing a suitable substrate for said films, at pressure of about 1 to 50 Torr; and b) directing a concentrated solar flux of from about 40 to about 60 watts/cm.sup.2 through said reactant mixture to produce substrate temperatures of about 750.degree. C. to about 950.degree. C. to activate deposition of the film on said substrate.

  1. Solar-induced chemical vapor deposition of diamond-type carbon films

    DOE Patents [OSTI]

    Pitts, J.R.; Tracy, C.E.; King, D.E.; Stanley, J.T.

    1994-09-13

    An improved chemical vapor deposition method for depositing transparent continuous coatings of sp[sup 3]-bonded diamond-type carbon films, comprises: (a) providing a volatile hydrocarbon gas/H[sub 2] reactant mixture in a cold wall vacuum/chemical vapor deposition chamber containing a suitable substrate for said films, at pressure of about 1 to 50 Torr; and (b) directing a concentrated solar flux of from about 40 to about 60 watts/cm[sup 2] through said reactant mixture to produce substrate temperatures of about 750 C to about 950 C to activate deposition of the film on said substrate. 11 figs.

  2. High stability electron field emitters made of nanocrystalline diamond coated carbon nanotubes

    SciTech Connect (OSTI)

    Sankaran, K. J.; Tai, N. H., E-mail: nhtai@mx.nthu.edu.tw [Department of Materials Science and Engineering, National Tsing-Hua University, Hsinchu 300, Taiwan (China); Srinivasu, K.; Leou, K. C. [Department of Engineering and System Science, National Tsing-Hua University, Hsinchu 300, Taiwan (China)] [Department of Engineering and System Science, National Tsing-Hua University, Hsinchu 300, Taiwan (China); Lin, I. N., E-mail: inanlin@mail.tku.edu.tw [Department of Physics, Tamkang University, Tamsui 251, Taiwan (China)

    2013-12-16

    We report enhanced life-time stability for the electron field emitters prepared by coating nanocrystalline diamond (NCD) on carbon nanotubes (CNTs). Upon overcoming the problem of poor stability in CNTs, the NCD-CNTs exhibit excellent life-time stability of 250 min tested at different applied voltages of 600 and 900?V. In contrast, the life-time stability of CNTs is only 33 min even at relatively low voltage of 360?V and starts arcing at 400?V. Hence, the NCD-CNTs with improved life-time stability have great potential for the applications as cathodes in flat panel displays and microplasma display devices.

  3. Storage and retrieval of ultrafast single photons using a room-temperature diamond quantum memory

    E-Print Network [OSTI]

    Duncan G. England; Kent A. G. Fisher; Jean-Philippe W. MacLean; Philip J. Bustard; Rune Lausten; Kevin J. Resch; Benjamin J. Sussman

    2014-09-11

    We report the storage and retrieval of single photons, via a quantum memory, in the optical phonons of room-temperature bulk diamond. The THz-bandwidth heralded photons are generated by spontaneous parametric downconversion and mapped to phonons via a Raman transition, stored for a variable delay, and released on demand. The second-order correlation of the memory output is $g^{(2)}(0) = 0.65 \\pm 0.07$, demonstrating preservation of non-classical photon statistics throughout storage and retrieval. The memory is low-noise, high-speed and broadly tunable; it therefore promises to be a versatile light-matter interface for local quantum processing applications.

  4. One- and two-dimensional nuclear magnetic resonance spectroscopy with a diamond quantum sensor

    E-Print Network [OSTI]

    J. M. Boss; K. Chang; J. Armijo; K. Cujia; T. Rosskopf; J. R. Maze; C. L. Degen

    2015-12-10

    We report on Fourier spectroscopy experiments performed with near-surface nitrogen-vacancy centers in a diamond chip. By detecting the free precession of nuclear spins rather than applying a multipulse quantum sensing protocol, we are able to unambiguously identify the NMR species devoid of harmonics. We further show that by engineering different Hamiltonians during free precession, the hyperfine coupling parameters as well as the nuclear Larmor frequency can be selectively measured with high precision (here 5 digits). The protocols can be combined to demonstrate two-dimensional Fourier spectroscopy. The technique will be useful for mapping nuclear coordinates in molecules en route to imaging their atomic structure.

  5. Recursive polarization of nuclear spins in diamond at arbitrary magnetic fields

    SciTech Connect (OSTI)

    Pagliero, Daniela; Laraoui, Abdelghani; Henshaw, Jacob D.; Meriles, Carlos A.

    2014-12-15

    We introduce an alternate route to dynamically polarize the nuclear spin host of nitrogen-vacancy (NV) centers in diamond. Our approach articulates optical, microwave, and radio-frequency pulses to recursively transfer spin polarization from the NV electronic spin. Using two complementary variants of the same underlying principle, we demonstrate nitrogen nuclear spin initialization approaching 80% at room temperature both in ensemble and single NV centers. Unlike existing schemes, our approach does not rely on level anti-crossings and is thus applicable at arbitrary magnetic fields. This versatility should prove useful in applications ranging from nanoscale metrology to sensitivity-enhanced NMR.

  6. Analysis of the spectroscopy of a hybrid system composed of a superconducting flux qubit and diamond NV centers

    E-Print Network [OSTI]

    H. Cai; Y. Matsuzaki; K. Kakuyanagi; H. Toida; X. Zhu; N. Mizuochi; K. Nemoto; K. Semba; W. J. Munro; S. Saito; H. Yamaguchi

    2015-05-28

    A hybrid system that combines the advantages of a superconducting flux qubit and an electron spin ensemble in diamond is one of the promising devices to realize quantum information processing. Exploring the properties of the superconductor diamond system is essential for the efficient use of this device. When we perform spectroscopy of this system, significant power broadening is observed. However, previous models to describe this system are known to be applicable only when the power broadening is negligible. Here, we construct a new approach to analyze this system with strong driving, and succeed to reproduce the spectrum with the power broadening. Our results provide an efficient way to analyze this hybrid system.

  7. An ultra-thin diamond membrane as a transmission particle detector and vacuum window for external microbeams

    SciTech Connect (OSTI)

    Grilj, V.; Skukan, N.; Jakši?, M.; Pomorski, M.; Kada, W.; Iwamoto, N.; Kamiya, T.; Ohshima, T.

    2013-12-09

    Several applications of external microbeam techniques demand a very accurate and controlled dose delivery. To satisfy these requirements when post-sample ion detection is not feasible, we constructed a transmission single-ion detector based on an ultra-thin diamond membrane. The negligible intrinsic noise provides an excellent signal-to-noise ratio and enables a hit-detection efficiency of close to 100%, even for energetic protons, while the small thickness of the membrane limits beam spreading. Moreover, because of the superb mechanical stiffness of diamond, this membrane can simultaneously serve as a vacuum window and allow the extraction of an ion microbeam into the atmosphere.

  8. Iterative-build OMIT maps: map improvement by iterative model building and refinement without model bias

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Grosse-Kunstleve, Ralf W.; Afonine, Pavel V.; Moriarty, Nigel W.; Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Read, Randy J. [Department of Haematology, University of Cambridge, Cambridge CB2 0XY (United Kingdom); Zwart, Peter H. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Hung, Li-Wei [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2008-05-01

    An OMIT procedure is presented that has the benefits of iterative model building density modification and refinement yet is essentially unbiased by the atomic model that is built. A procedure for carrying out iterative model building, density modification and refinement is presented in which the density in an OMIT region is essentially unbiased by an atomic model. Density from a set of overlapping OMIT regions can be combined to create a composite ‘iterative-build’ OMIT map that is everywhere unbiased by an atomic model but also everywhere benefiting from the model-based information present elsewhere in the unit cell. The procedure may have applications in the validation of specific features in atomic models as well as in overall model validation. The procedure is demonstrated with a molecular-replacement structure and with an experimentally phased structure and a variation on the method is demonstrated by removing model bias from a structure from the Protein Data Bank.

  9. The effects of air pollution regulations on the US refining industry. Task 3

    SciTech Connect (OSTI)

    Not Available

    1989-06-01

    Numerous air pollution regulations affecting petroleum refineries recently have been promulgated, have been proposed, or are under consideration at the federal, state, and local level. As shown in Figure ES-1, all of these environmental regulations are intended to take effect over the relatively short time period from 1989 through 1995. In the aggregate these regulatory activities have significant implications for the US refining industry and the Nation, including: Major investment requirements; changes in industry profitability; potential closure of some refineries; and potential changes in crude oil or product import dependence. At issue is whether the cumulative effect of these regulations could so adversely affect the US refining industry that US national security would be affected. In addition to the regulations outlined in Figure ES-1, President Bush recently presented a major new plan to improve the nation`s air quality. The aspects of the President`s plan that could strongly affect US refineries are summarized below.

  10. Report to the Congress on the storage of refined petroleum products and on regional supply interruptions

    SciTech Connect (OSTI)

    Not Available

    1991-06-01

    This report describes petroleum and petroleum products storage and supply disruption. Information is presented under the following topics: Historical Perspective; Current Patterns of Supply and Disposition of Petroleum Products in the Primary Distribution System; PADD I Clean Products Supply/Demand; 1990 Regional Petroleum Reserve Annual Computation; Market Infrastructure and Commercial Practices in the California Motor Gasoline Market, as Related to Potential Refined Petroleum Product Reserve Structures and Sales Procedures; Infrastructure and Commercial Practices in the Northeast Distillate Market, as Related to Potential Refined Petroleum Product Reserve Structures and Sales Procedures; Storage Stability Characteristics of Petroleum Products and Crude Oil; Effect of 1990 Clean Air Act Amendments on Demand for Petroleum Product Storage Capacity; and Environmental Regulations on Tanks.

  11. ,"U.S. Reformulated, Average Refiner Gasoline Prices"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S.longecReformulated Gasoline Refiner

  12. A refined r-factor algorithm for TVD schemes on arbitrary unstructured meshes

    E-Print Network [OSTI]

    Zhang, Di; Jiang, Chunbo; Cheng, Liang; Liang, Dongfang

    2015-07-03

    and Offshore Engineering, Dalian University of Technology, Dalian, 116024, China 4Department of Engineering, University of Cambridge, Trumpington Street, Cambridge CB2 1PZ, UK SUMMARY A refined r-factor algorithm for implementing TVD schemes... ’s and Hou’s algorithms also require different formulations for boundary cells in order to be applicable in all situations. To ensure the physical boundedness of Uq , all the neighboring cells and boundary faces of the up-wind cell C are considered except...

  13. Application of a catalyst deactivation model for hydrotreating solvent refined coal feedstocks

    SciTech Connect (OSTI)

    Nalitham, R.V.

    1983-10-01

    A simple kinetic model, including a first-order catalyst deactivation rate, is applied to upgrading of coal-derived feedstocks prepared from two solvent refined coal fractions. A catalyst deactivation mechanism is proposed which involves the adsorption and surface reaction of coke precursors on catalytic active sites. The effect of feedstock composition, temperature and pressure on kinetic parameters, and in particular the catalyst deactivation rate, is determined.

  14. Petroleum Refining Sector (NAICS 324110) Energy and GHG Combustion Emissions Profile, November 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills andOrder 422.1, CONDUCTCritical Materials Use |Petroleum Refining69

  15. ITP Petroleum Refining: Energy and Environmental Profile of the U.S.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls21,Equipment:Petroleum Refining Industry (November

  16. Improved crystallographic models through iterated local density-guided model deformation and reciprocal-space refinement

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Read, Randy J. [University of Cambridge, Cambridge CB2 0XY (United Kingdom); Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Brunger, Axel T. [Stanford University, 318 Campus Drive West, Stanford, CA 94305-5432 (United States); Afonine, Pavel V.; Grosse-Kunstleve, Ralf W. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Hung, Li-Wei [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2012-07-01

    A density-based procedure is described for improving a homology model that is locally accurate but differs globally. The model is deformed to match the map and refined, yielding an improved starting point for density modification and further model-building. An approach is presented for addressing the challenge of model rebuilding after molecular replacement in cases where the placed template is very different from the structure to be determined. The approach takes advantage of the observation that a template and target structure may have local structures that can be superimposed much more closely than can their complete structures. A density-guided procedure for deformation of a properly placed template is introduced. A shift in the coordinates of each residue in the structure is calculated based on optimizing the match of model density within a 6 Å radius of the center of that residue with a prime-and-switch electron-density map. The shifts are smoothed and applied to the atoms in each residue, leading to local deformation of the template that improves the match of map and model. The model is then refined to improve the geometry and the fit of model to the structure-factor data. A new map is then calculated and the process is repeated until convergence. The procedure can extend the routine applicability of automated molecular replacement, model building and refinement to search models with over 2 Å r.m.s.d. representing 65–100% of the structure.

  17. Worldwide refining

    SciTech Connect (OSTI)

    Williamson, M.

    1994-12-19

    The paper consists of several tables compiling data on refinery capacities by country, by state, and by company. The capacity data are given by process as well as by final product. Processes include vacuum distillation, thermal operations, catalytic cracking, catalytic reforming, catalytic hydrocracking, catalytic hydrorefining, and catalytic hydrotreating. Products include alkylates, polymers, and dimers; aromatics and isomers; oxygenates; hydrogen; asphalts; and coke.

  18. Petroleum refining

    SciTech Connect (OSTI)

    Gary, J.H. (Colorado School of Mines, Golden, CO (United States)); Handwerk, G.E.

    1991-01-01

    This report is on the following topics: Refinery Products; Refinery Feedstocks; Crude Distillation; Coking and Thermal Processes; Catalytic Reforming and Isomerization; Catalytic Cracking; Hydrotreating Catalytic Hydrocracking and Hydroprocessing Alkylation and Polymerization; Product Blending; Supporting Processes; Lubricating Oils; Petrochemical Feedstocks; Cost Estimation; and Economic Evaluation.

  19. Worldwide refining

    SciTech Connect (OSTI)

    Bell, L.

    1993-12-20

    The paper presents compiled data on operating refineries worldwide by country and by company within these countries. Data are presented on charge capacity for the following processes: vacuum distillation, thermal operations, catalytic cracking, catalytic reforming, cat-hydrocracking, cat hydrorefining, and cat hydrotreating. Data are also presented on the production capacity for the following products: alkylates and polymers, aromatics and isomers, lubricating oils, asphalt, hydrogen, and coke.

  20. A diamond based neutron spectrometer for diagnostics of deuterium-tritium fusion plasmas

    SciTech Connect (OSTI)

    Cazzaniga, C., E-mail: carlo.cazzaniga@mib.infn.it; Nocente, M.; Gorini, G. [University of Milano Bicocca, Piazza della Scienza 3, Milano (Italy); Istituto di Fisica del Plasma, Associazione EURATOM-ENEA-CNR, via Roberto Cozzi 53, Milano (Italy); Rebai, M.; Giacomelli, L. [University of Milano Bicocca, Piazza della Scienza 3, Milano (Italy); Tardocchi, M.; Croci, G.; Grosso, G. [Istituto di Fisica del Plasma, Associazione EURATOM-ENEA-CNR, via Roberto Cozzi 53, Milano (Italy); Calvani, P.; Girolami, M.; Trucchi, D. M. [CNR-ISM, Research Area Roma 1, Via Salaria km 29.300, 00015-Monterotondo Scalo (Rm) (Italy); Griesmayer, E. [Atominstitut, Vienna University of Technology, Vienna (Austria); Pillon, M. [Associazione EURATOM-ENEA sulla Fusione ENEA C.R. Frascati, Via E. Fermi, 45, 00044 Frascati (Roma) (Italy)

    2014-11-15

    Single crystal Diamond Detectors (SDD) are being increasingly exploited for neutron diagnostics in high power fusion devices, given their significant radiation hardness and high energy resolution capabilities. The geometrical efficiency of SDDs is limited by the size of commercially available crystals, which is often smaller than the dimension of neutron beams along collimated lines of sight in tokamak devices. In this work, we present the design and fabrication of a 14 MeV neutron spectrometer consisting of 12 diamond pixels arranged in a matrix, so to achieve an improved geometrical efficiency. Each pixel is equipped with an independent high voltage supply and read-out electronics optimized to combine high energy resolution and fast signals (<30 ns), which are essential to enable high counting rate (>1 MHz) spectroscopy. The response function of a prototype SDD to 14 MeV neutrons has been measured at the Frascati Neutron Generator by observation of the 8.3 MeV peak from the {sup 12}C(n, ?){sup 9}Be reaction occurring between neutrons and {sup 12}C nuclei in the detector. The measured energy resolution (2.5% FWHM) meets the requirements for neutron spectroscopy applications in deuterium-tritium plasmas.

  1. Optimizing a dynamical decoupling protocol for solid-state electronic spin ensembles in diamond

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Farfurnik, D.; Jarmola, A.; Pham, L. M.; Wang, Z. H.; Dobrovitski, V. V.; Walsworth, R. L.; Budker, D.; Bar-Gill, N.

    2015-08-24

    We demonstrate significant improvements of the spin coherence time of a dense ensemble of nitrogen-vacancy (NV) centers in diamond through optimized dynamical decoupling (DD). Cooling the sample down to 77 K suppresses longitudinal spin relaxation T1 effects and DD microwave pulses are used to increase the transverse coherence time T2 from ~0.7ms up to ~30ms. Furthermore, we extend previous work of single-axis (Carr-Purcell-Meiboom-Gill) DD towards the preservation of arbitrary spin states. Following a theoretical and experimental characterization of pulse and detuning errors, we compare the performance of various DD protocols. We also identify that the optimal control scheme for preservingmore »an arbitrary spin state is a recursive protocol, the concatenated version of the XY8 pulse sequence. The improved spin coherence might have an immediate impact on improvements of the sensitivities of ac magnetometry. Moreover, the protocol can be used on denser diamond samples to increase coherence times up to NV-NV interaction time scales, a major step towards the creation of quantum collective NV spin states.« less

  2. Stokes--anti-Stokes Correlations in Raman Scattering from Diamond Membranes

    E-Print Network [OSTI]

    Kasperczyk, Mark; Neu, Elke; Maletinsky, Patrick; Novotny, Lukas

    2015-01-01

    We investigate the arrival statistics of Stokes (S) and anti-Stokes (aS) Raman photons generated in diamond membranes. Strong quantum correlations between the S and aS signals are observed, which implies that the two processes share the same phonon, that is, the phonon excited by the S process is consumed in the aS process. We show that the intensity cross-correlation $g_{\\rm S,aS}^{(2)}(0)$, which describes the simultaneous detection of Stokes and anti-Stokes photons, decreases steadily with laser power as $1/{\\rm P_L}$. Contrary to many other material systems, diamond exhibits a maximum $g_{\\rm S,aS}^{(2)}(0)$ at very low pump powers, implying that the Stokes-induced aS photons outnumber the thermally generated aS photons. On the other hand, the coincidence rate shows a quadratic plus cubic power dependence, which indicates a departure from the Stokes-induced anti-Stokes process.

  3. Grain size dependent mechanical properties of nanocrystalline diamond films grown by hot-filament CVD

    SciTech Connect (OSTI)

    Wiora, M; Bruehne, K; Floeter, A; Gluche, P; Willey, T M; Kucheyev, S O; Van Buuren, A W; Hamza, A V; Biener, J; Fecht, H

    2008-08-01

    Nanocrystalline diamond (NCD) films with a thickness of {approx}6 {micro}m and with average grain sizes ranging from 60 to 9 nm were deposited on silicon wafers using a hot-filament chemical vapor deposition (HFCVD) process. These samples were then characterized with the goal to identify correlations between grain size, chemical composition and mechanical properties. The characterization reveals that our films are phase pure and exhibit a relatively smooth surface morphology. The levels of sp{sup 2}-bonded carbon and hydrogen impurities are low, and showed a systematic variation with the grain size. The hydrogen content increases with decreasing grain size, whereas the sp{sup 2} carbon content decreases with decreasing grain size. The material is weaker than single crystalline diamond, and both stiffness and hardness decrease with decreasing grain size. These trends suggest gradual changes of the nature of the grain boundaries, from graphitic in the case of the 60 nm grain size material to hydrogen terminated sp{sup 3} carbon for the 9 nm grain size material. The films exhibit low levels of internal stress and freestanding structures with a length of several centimeters could be fabricated without noticeable bending.

  4. Magneto-optical imaging of thin magnetic films using spins in diamond

    E-Print Network [OSTI]

    David A. Simpson; Jean-Philippe Tetienne; Julia McCoey; Kumaravelu Ganesan; Liam T. Hall; Steven Petrou; Robert E. Scholten; Lloyd C. L. Hollenberg

    2015-08-10

    Imaging the fields of magnetic materials provides crucial insight into the physical and chemical processes surrounding magnetism, and has been a key ingredient in the spectacular development of magnetic data storage. Existing approaches using the magneto-optic Kerr effect (MOKE), x-ray and electron microscopy have limitations that constrain further development, and there is increasing demand for imaging and characterisation of magnetic phenomena in real time with high spatial resolution. In this work, we show how the magneto-optical response of an array of negatively-charged nitrogen-vacancy spins in diamond can be used to image and map the sub-micron stray magnetic field patterns from thin ferromagnetic films. Using optically detected magnetic resonance, we demonstrate wide-field magnetic imaging over 100x100 {\\mu}m^2 with a diffraction-limited spatial resolution of 440 nm at video frame rates, under ambient conditions. We demonstrate a novel all-optical spin relaxation contrast imaging approach which can image magnetic structures in the absence of an applied microwave field. Straightforward extensions promise imaging with sub-{\\mu}T sensitivity and sub-optical spatial and millisecond temporal resolution. This work establishes practical diamond-based wide-field microscopy for rapid high-sensitivity characterisation and imaging of magnetic samples, with the capability for investigating magnetic phenomena such as domain wall and skyrmion dynamics and the spin Hall effect in metals.

  5. On Monic Gr\\"obner Bases in Free Algebras over Rings Stemming from Bergman's Diamond Lemma

    E-Print Network [OSTI]

    Li, Huishi

    2009-01-01

    Let $R$ be an arbitrary commutative ring and $R =R$ the free algebra of $n$ generators over $R$. Note that Bergman's diamond lemma characterizes the resolvability of ambiguities of monic relations of the form $W_{\\sigma}-f_{\\sigma}$ with $f_{\\sigma}$ a linear combination of monomials $\\prec W_{\\sigma}$, where $\\prec$ is a semigroup partial ordering on $$; and that in the algorithmic language of Gr\\"obner basis theory over a ground field $K$, the diamond lemma had been translated into the implementable termination theorem. Here we bring the termination theorem over $R$ into play so that monic Gr\\"obner Bases in $R$ may be verified in an effective way, though it does not necessarily yield a noncommutative analogue of Buchberger Algorithm in such a setting. This enables us to recognize that many important algebras over rings may have Gr\\"obner defining relations, and thereby enables us to study such algebras via their $\\mathbb{N}$-leading homogeneous algebra and ${\\cal B}_R$-leading homogeneous algebra.

  6. Fact #676: May 23, 2011 U.S. Refiners Produce about 19 Gallons of Gasoline from a Barrel of Oil

    Broader source: Energy.gov [DOE]

    A standard U.S. barrel contains 42 gallons of crude oil which yields about 44 gallons of petroleum products. The additional 2 gallons of petroleum products come from refiner gains which result in...

  7. Steam system opportunity assessment for the pulp and paper, chemical manufacturing, and petroleum refining industries: Main report

    SciTech Connect (OSTI)

    None, None

    2002-10-01

    This report assesses steam generation and use in the pulp and paper, chemical, and petroleum refining industries, and estimates the potential for energy savings from implementation of steam system performance and efficiency improvements.

  8. Howard J. Diamond, U.S. GCOS Program Manager, National Climatic Data Center (NCDC), National Oceanic and Atmospheric Administration (NOAA)

    E-Print Network [OSTI]

    Howard J. Diamond, U.S. GCOS Program Manager, National Climatic Data Center (NCDC), National Oceanic and Atmospheric Administration (NOAA) Director, World Data Center for Meteorology Tel : +1 System Program Manager Director, World Data Center for Meteorology Formal NOAA Lead on U.S. climate bi

  9. Z .Diamond and Related Materials 10 2001 1947 1951 Synthesis of high-density carbon nanotube films by microwave

    E-Print Network [OSTI]

    Tománek, David

    and vertical growth rate of nanotubes. The growth rate on an iron-coated substrate is higher than on a nickel. Nanotubes in the present study are fabricated by MPCVD using iron Z . Z .Fe or nickel Ni as transition metalZ .Diamond and Related Materials 10 2001 1947 1951 Synthesis of high-density carbon nanotube films

  10. Does the Use of Diamond-Like Carbon Coating and Organophosphate Lubricant Additive Together Cause Excessive Tribochemical Material Removal?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Yan; Leonard, Donovan N.; Meyer, Harry M.; Luo, Huimin; Qu, Jun

    2015-08-22

    We observe unexpected wear increase on a steel surface that rubbed against diamond-like carbon (DLC) coatings only when lubricated by phosphate-based antiwear additives. Contrary to the literature hypothesis of a competition between zinc dialkyldithiophosphate produced tribofilms and DLC-induced carbon transfer, here a new wear mechanism based on carbon-catalyzed tribochemical interactions supported by surface characterization is proposed

  11. Ensemble refinement shows conformational flexibility in crystal structures of human complement factor D

    SciTech Connect (OSTI)

    Forneris, Federico; Burnley, B. Tom; Gros, Piet, E-mail: p.gros@uu.nl [Utrecht University, Padualaan 8, 3584 CH Utrecht (Netherlands)

    2014-03-01

    Ensemble-refinement analysis of native and mutant factor D (FD) crystal structures indicates a dynamical transition in FD from a self-inhibited inactive conformation to a substrate-bound active conformation that is reminiscent of the allostery in thrombin. Comparison with previously observed dynamics in thrombin using NMR data supports the crystallographic ensembles. Human factor D (FD) is a self-inhibited thrombin-like serine proteinase that is critical for amplification of the complement immune response. FD is activated by its substrate through interactions outside the active site. The substrate-binding, or ‘exosite’, region displays a well defined and rigid conformation in FD. In contrast, remarkable flexibility is observed in thrombin and related proteinases, in which Na{sup +} and ligand binding is implied in allosteric regulation of enzymatic activity through protein dynamics. Here, ensemble refinement (ER) of FD and thrombin crystal structures is used to evaluate structure and dynamics simultaneously. A comparison with previously published NMR data for thrombin supports the ER analysis. The R202A FD variant has enhanced activity towards artificial peptides and simultaneously displays active and inactive conformations of the active site. ER revealed pronounced disorder in the exosite loops for this FD variant, reminiscent of thrombin in the absence of the stabilizing Na{sup +} ion. These data indicate that FD exhibits conformational dynamics like thrombin, but unlike in thrombin a mechanism has evolved in FD that locks the unbound native state into an ordered inactive conformation via the self-inhibitory loop. Thus, ensemble refinement of X-ray crystal structures may represent an approach alternative to spectroscopy to explore protein dynamics in atomic detail.

  12. Experimental Evaluation of Beam to Diamond Box Column Connection with Through Plate in Moment Frames

    SciTech Connect (OSTI)

    Keshavarzi, Farhad; Torabian, Shahabeddin; Imanpour, Ali; Mirghaderi, Rasoul

    2008-07-08

    Moment resisting frames with built up section have very enhanced features due to high bending stiffness and strength characteristics in two principal axes and access to column faces for beam to column easy connections. But due to proper transfer of beam stresses to column faces there were always some specific controvertibly issues that how to make the load transfer through and in plane manner in order to mobilize the forces in column faces. Using diamond column instead of box column provide possibility to mobilize the load transfer mechanism in column faces. This section as a column has considerable benefit such as high plastic to elastic section modulus ratio which is an effective factor for force controlled components. Typical connection has no chance to be applied with diamond column.This paper elucidates the seismic behavior of through-plates moment connections to diamond box columns for use in steel moment resisting frames. This connection has a lot of economical benefits such as no need to horizontal continuity plates and satisfying the weak beam--strong column criteria in the connection region. They might serve as panel zone plates as well. According to high shear demand in panel zone of beam to column joint one should use the doublers plates in order to decrease the shear strength demand in this sensitive part of structure but these plates have no possibility to mobilize the load transfer mechanism in column web and transfer them to column flanges. In this type of connection, column faces have effective role in order to decrease the demands on through plate and they are impressive factors for improving the performance of the connection.Experimental analysis was conducted to elucidate the seismic behavior of this connection. The results of Experimental analysis established the effectiveness of the through plate in mitigating local stress concentrations and forming the plastic hinge zone in the beam away from the beam to column interface. The moment-rotation graphs form sub-assemblage show a desirable seismic performance of this connection.

  13. ,"No. 2 Diesel Fuel Sales to End Users Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S.longec 188 U.S.1Sales to End Users Refiner Sales

  14. ,"No. 2 Distillate Sales to End Users Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S.longec 188 U.S.1Sales to End Users Refiner

  15. ,"U.S. Reformulated Gasoline Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S.longecReformulated Gasoline Refiner Sales

  16. ,"U.S. Sales for Resale, Total Refiner Motor Gasoline Sales Volumes"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S.longecReformulated Gasoline RefinerResidualResale,

  17. HASSP and HEAVY: Tools for automated heavy atom searches and refinement

    SciTech Connect (OSTI)

    Terwilliger, T.T.

    1994-06-01

    In this tutorial, a simple example using model data for one derivative with anomalous information will be used to demonstrate the use of HASSP and HEAVY in heavy atom determination and refinement. The data used here will actually be based on model MAD data that has been converted to MIR format using MADMRG, but the treatment is identical to that for any other SIR+anomalous data. The data nd most of the programs discussed here can be obtained by e-mail from ``terwil @prov2.lanl.gov`` along with VAX-specific command files to run the data through.

  18. European refiners must seek creative processes to justify heavy-ends projects

    SciTech Connect (OSTI)

    Hunt, P. [Chem Systems Ltd., London (United Kingdom)

    1996-12-09

    There are strong reasons for wanting to upgrade the bottom of the crude oil barrel. But European refiners will not find it easy to get approval and funding for major capital investment projects. In most cases, investment justification will have to be creative and may need to rely on factors traditionally considered to be outside the conventional refinery fence. Examples of such creative upgrading schemes are those employed in four gasification projects planned for refineries in Italy. It is clear that the major obstacles to heavy residue processing are not technical, but economic. A review of these obstacles will set the stage for European investment in bottom-of-the-barrel processing.

  19. Methods of refining and producing dibasic esters and acids from natural oil feedstocks

    SciTech Connect (OSTI)

    Snead, Thomas E; Cohen, Steven A; Gildon, Demond L

    2015-04-07

    Methods are provided for refining natural oil feedstocks and producing dibasic esters and/or dibasic acids. The methods comprise reacting a terminal olefin with an internal olefin in the presence of a metathesis catalyst to form a dibasic ester and/or dibasic acid. In certain embodiments, the olefin esters are formed by reacting the feedstock in the presence of a metathesis catalyst under conditions sufficient to form a metathesized product comprising olefins and esters, separating the olefins from the esters in the metathesized product, and transesterifying the esters in the presence of an alcohol to form a transesterified product having olefin esters.

  20. Quantitative phase analysis of Mg:ZrO{sub 2} nanoparticles by Rietveld refinement method

    SciTech Connect (OSTI)

    Balaji, V. Senthilkumaran, S. Thangadurai, P.

    2014-04-24

    To quantify the structural phases of nanocrystalline ZrO{sub 2} doped with Mg ions of varying concentrations (3, 5, 10, 15 and 20%) and annealed at different temperatures. Magnesia doped zirconia was prepared by chemical co-precipitation method and annealed up to 1000°C. The monoclinic and tetragonal phases present in Mg:ZrO{sub 2} were quantified using Rietveld refinement analysis of the X-ray diffraction data and compared with the Direct method based on peak intensity calculations. Tetragonal phase was dominant in the 600°C annealed Mg:ZrO{sub 2} for all Mg concentrations.

  1. Table 3a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price toStocks 2009CubicAnalysisYearArkansas"a. Imported Refiner

  2. Photonic architecture for scalable quantum information processing in NV-diamond

    E-Print Network [OSTI]

    Kae Nemoto; Michael Trupke; Simon J. Devitt; Ashley M. Stephens; Kathrin Buczak; Tobias Nobauer; Mark S. Everitt; Jorg Schmiedmayer; William J. Munro

    2013-09-17

    Physics and information are intimately connected, and the ultimate information processing devices will be those that harness the principles of quantum mechanics. Many physical systems have been identified as candidates for quantum information processing, but none of them are immune from errors. The challenge remains to find a path from the experiments of today to a reliable and scalable quantum computer. Here, we develop an architecture based on a simple module comprising an optical cavity containing a single negatively-charged nitrogen vacancy centre in diamond. Modules are connected by photons propagating in a fiber-optical network and collectively used to generate a topological cluster state, a robust substrate for quantum information processing. In principle, all processes in the architecture can be deterministic, but current limitations lead to processes that are probabilistic but heralded. We find that the architecture enables large-scale quantum information processing with existing technology.

  3. Imaging shock waves in diamond with both high temporal and spatial resolution at an XFEL

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Schropp, Andreas; Hoppe, Robert; Meier, Vivienne; Patommel, Jens; Seiboth, Frank; Ping, Yuan; Hicks, Damien G.; Beckwith, Martha A.; Collins, Gilbert W.; Higginbotham, Andrew; et al

    2015-06-18

    The advent of hard x-ray free-electron lasers (XFELs) has opened up a variety of scientific opportunities in areas as diverse as atomic physics, plasma physics, nonlinear optics in the x-ray range, and protein crystallography. In this article, we access a new field of science by measuring quantitatively the local bulk properties and dynamics of matter under extreme conditions, in this case by using the short XFEL pulse to image an elastic compression wave in diamond. The elastic wave was initiated by an intense optical laser pulse and was imaged at different delay times after the optical pump pulse using magnifiedmore »x-ray phase-contrast imaging. The temporal evolution of the shock wave can be monitored, yielding detailed information on shock dynamics, such as the shock velocity, the shock front width, and the local compression of the material. The method provides a quantitative perspective on the state of matter in extreme conditions.« less

  4. A superconducting cavity bus for single Nitrogen Vacancy defect centres in diamond

    E-Print Network [OSTI]

    J. Twamley; S. D. Barrett

    2009-12-18

    Circuit-QED has demonstrated very strong coupling between individual microwave photons trapped in a superconducting coplanar resonator and nearby superconducting qubits. In this work we show how, by designing a novel interconnect, one can strongly connect the superconducting resonator, via a magnetic interaction, to a small number (perhaps single), of electronic spins. By choosing the electronic spin to be within a Nitrogen Vacancy centre in diamond one can perform optical readout, polarization and control of this electron spin using microwave and radio frequency irradiation. More importantly, by utilising Nitrogen Vacancy centres with nearby 13C nuclei, using this interconnect, one has the potential build a quantum device where the nuclear spin qubits are connected over centimeter distances via the Nitrogen Vacancy electronic spins interacting through the superconducting bus.

  5. Polarization dependent asymmetric magneto-resistance features in nanocrystalline diamond films

    SciTech Connect (OSTI)

    Bhattacharyya, Somnath, E-mail: Somnath.Bhattacharyya@wits.ac.za [Nano-Scale Transport Physics Laboratory, School of Physics, University of the Witwatersrand, Private Bag 3, WITS 2050, Johannesburg (South Africa); DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, Private Bag 3, WITS 2050, Johannesburg, South Africa and Department of Physics and Astronomy, University of Leeds, Leeds LS2 9JT (United Kingdom); Churochkin, Dmitry [Nano-Scale Transport Physics Laboratory, School of Physics, University of the Witwatersrand, Private Bag 3, WITS 2050, Johannesburg (South Africa)

    2014-08-18

    Polar angle-dependence of magneto-resistance (AMR) in heavily nitrogen-incorporated ultra-nanocrystalline diamond (UNCD) films is recorded by applying high magnetic fields, which shows strong anisotropic features at low temperatures. The temperature-dependence of MR and AMR can reveal transport in the weak-localization regime, which is explained by using a superlattice model for arbitrary values of disorder and angles. While a propagative Fermi surface model explains the negative MR features for low degree of disorder the azimuthal angle-dependent MR shows field dependent anisotropy due to the aligned conducting channels on the layers normal to film growth direction. The analysis of MR and AMR can extract the temperature dependence of dephasing time with respect to the elastic scattering time which not only establishes quasi-two dimensional features in this system but also suggests a potential application in monitoring the performance of UNCD based quantum devices.

  6. Band-selective shaped pulse for high fidelity quantum control in diamond

    SciTech Connect (OSTI)

    Chang, Yan-Chun; Xing, Jian; Liu, Gang-Qin; Jiang, Qian-Qing; Li, Wu-Xia [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Zhang, Fei-Hao [Tsinghua National Laboratory for Information Science and Technology, Beijing 100084 (China); State Key Laboratory of Low-Dimensional Physics and Department of Physics, Tsinghua University, Beijing 100084 (China); Gu, Chang-Zhi; Pan, Xin-Yu, E-mail: xypan@aphy.iphy.ac.cn [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Collaborative Innovation Center of Quantum Matter, Beijing 100871 (China); Long, Gui-Lu [Tsinghua National Laboratory for Information Science and Technology, Beijing 100084 (China); State Key Laboratory of Low-Dimensional Physics and Department of Physics, Tsinghua University, Beijing 100084 (China); Collaborative Innovation Center of Quantum Matter, Beijing 100871 (China)

    2014-06-30

    High fidelity quantum control of qubits is crucially important for realistic quantum computing, and it becomes more challenging when there are inevitable interactions between qubits. We introduce a band-selective shaped pulse, refocusing BURP (REBURP) pulse, to cope with the problems. The electron spin of nitrogen-vacancy centers in diamond is flipped with high fidelity by the REBURP pulse. In contrast with traditional rectangular pulses, the shaped pulse has almost equal excitation effect in a sharply edged region (in frequency domain). So the three sublevels of host {sup 14}N nuclear spin can be flipped accurately simultaneously, while unwanted excitations of other sublevels (e.g., of a nearby {sup 13}C nuclear spin) is well suppressed. Our scheme can be used for various applications such as quantum metrology, quantum sensing, and quantum information process.

  7. Coherent spin control of a nanocavity-enhanced qubit in diamond

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Luozhou; Lu, Ming; Schroder, Tim; Chen, Edward H.; Walsh, Michael; Bayn, Igal; Goldstein, Jordan; Gaathon, Ophir; Trusheim, Matthew E.; Mower, Jacob; et al

    2015-01-28

    A central aim of quantum information processing is the efficient entanglement of multiple stationary quantum memories via photons. Among solid-state systems, the nitrogen-vacancy centre in diamond has emerged as an excellent optically addressable memory with second-scale electron spin coherence times. Recently, quantum entanglement and teleportation have been shown between two nitrogen-vacancy memories, but scaling to larger networks requires more efficient spin-photon interfaces such as optical resonators. Here we report such nitrogen-vacancy nanocavity systems in strong Purcell regime with optical quality factors approaching 10,000 and electron spin coherence times exceeding 200 µs using a silicon hard-mask fabrication process. This spin-photon interfacemore »is integrated with on-chip microwave striplines for coherent spin control, providing an efficient quantum memory for quantum networks.« less

  8. Broadband, noise-free optical quantum memory with neutral nitrogen-vacancy centers in diamond

    E-Print Network [OSTI]

    E. Poem; C. Weinzetl; J. Klatzow; K. T. Kaczmarek; J. H. D. Munns; T. F. M. Champion; D. J. Saunders; J. Nunn; I. A. Walmsley

    2015-04-23

    It is proposed that the ground-state manifold of the neutral nitrogen-vacancy center in diamond could be used as a quantum two-level system in a solid-state-based implementation of a broadband, noise-free quantum optical memory. The proposal is based on the same-spin $\\Lambda$-type three-level system created between the two E orbital ground states and the A$_1$ orbital excited state of the center, and the cross-linear polarization selection rules obtained with the application of transverse electric field or uniaxial stress. Possible decay and decoherence mechanisms of this system are discussed, and it is shown that high-efficiency, noise-free storage of photons as short as a few tens of picoseconds for at least a few nanoseconds could be possible at low temperature.

  9. Resolving single molecule structures with nitrogen-vacancy centers in diamond

    E-Print Network [OSTI]

    Matthias Kost; Jianming Cai; Martin B. Plenio

    2014-07-23

    We present two-dimensional nuclear magnetic resonance spectroscopy protocols based on nitrogen-vacancy (NV) centers in diamond as efficient quantum sensors of protein structure. Continuous microwave driving fields are used to achieve Hartmann-Hahn resonances between NV spin sensor and proximate nuclei for selective control of nuclear spins and measurement of their polarization. Our protocols take advantage of the strong coupling between the NV sensor and the nuclei, thus facilitating coherence control of nuclear spins and relax the requirement of nuclear spin polarization. We dramatically reduce the experimental effort by employing a singular value thresholding matrix completion algorithm from signal processing to regain the resolution of protein structure based on sub-sampled data from NV based single molecule nuclear magnetic resonance spectroscopy. As an illustration, we demonstrate the power of this approach by identifying the nitrogen-Hydrogen interaction peak in an Alanine spectrum based on merely 5% of the sample data.

  10. Creation of ensembles of nitrogen-vacancy centers in diamond by neutron and electron irradiation

    E-Print Network [OSTI]

    Tobias Nöbauer; Kathrin Buczak; Andreas Angerer; Stefan Putz; Georg Steinhauser; Johanna Akbarzadeh; Herwig Peterlik; Johannes Majer; Jörg Schmiedmayer; Michael Trupke

    2013-09-02

    We created dense ensembles of negatively charged nitrogen-vacancy (NV-) centers in diamond by neutron and electron irradiation for applications in hybrid quantum systems and magnetometry. We characterize fluorescence intensity, optical and coherence properties of the resulting defects by confocal microscopy, UV/Vis and FTIR spectroscopy, optically detected magnetic resonance and small angle X-ray scattering. We find the highest densities of NV- at neutron fluences on the order of 10^17 cm^-2 and electron doses of 10^18 cm^-2, with spin resonance linewidths of 6 MHz. Lower electron energies increase the ratio of centers in the desired negative charge state to those in the neutral one. Annealing at 900 {\\deg}C during the irradiation reduces the spin resonance linewidth. Electron irradiation furthermore results in substantially higher optical transparency compared to neutron irradiation.

  11. Conformation-dependent backbone geometry restraints set a new standard for protein crystallographic refinement

    SciTech Connect (OSTI)

    Moriarty, Nigel W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tronrud, Dale E. [Oregon State Univ., Corvallis, OR (United States). Dept. of Biochemistry and Biophysics; Adams, Paul D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Univ. of California, Berkeley, CA (United States). Dept. of Bioengineering; Karplus, P. Andrew [Oregon State Univ., Corvallis, OR (United States). Dept. of Biochemistry and Biophysics

    2014-09-01

    Ideal values of bond angles and lengths used as external restraints are crucial for the successful refinement of protein crystal structures at all but the highest of resolutions. The restraints in common usage today have been designed based on the assumption that each type of bond or angle has a single ideal value independent of context. However, recent work has shown that the ideal values are, in fact, sensitive to local conformation, and as a first step toward using such information to build more accurate models, ultra-high resolution protein crystal structures have been used to derive a conformation-dependent library (CDL) of restraints for the protein backbone (Berkholz et al. 2009. Structure. 17, 1316). Here, we report the introduction of this CDL into the Phenix package and the results of test refinements of thousands of structures across a wide range of resolutions. These tests show that use of the conformation dependent library yields models that have substantially better agreement with ideal main-chain bond angles and lengths and, on average, a slightly enhanced fit to the X-ray data. No disadvantages of using the backbone CDL are apparent. In Phenix usage of the CDL can be selected by simply specifying the cdl=True option. This successful implementation paves the way for further aspects of the context-dependence of ideal geometry to be characterized and applied to improve experimental and predictive modelling accuracy.

  12. US imports. Part II. Refined product market shares, then and now

    SciTech Connect (OSTI)

    Not Available

    1987-07-08

    Unlike imports of crude oil to the US, which were up 45.7% between 1977 and 1986, imports of petroleum products have fallen by about 8.6% during the same period. The crude oil price crash of 1986 deepened US dependency on imports of crude, from 21.4% in 1977 to 25.4% in 1986, but reduced the dependency in the case of total refined products from 11.32% in 1977 to 11.13% in 1986. Comparing the first four months of 1987 with 1986, US dependency on imported petroleum products is down 2.73 percentage points; import dependency on OPEC petroleum products is down 4.60 percentage points; dependency on Arab OPEC countries product imports is down 1.88 percentage points; and for Eastern Hemisphere exporters, that dependency has fallen 2.17 percentage points. This issue also contains: (1) ED refining netback data from the US Gulf and West coasts, Rotterdam, and Singapore for early July 1987; and (2) ED fuel price/tax series for countries of the Western Hemisphere, July 1987 edition. 4 figures, 5 tables.

  13. A new approach to oil refining with allowance for ecological requirements

    SciTech Connect (OSTI)

    Nasirov, R.K.; Serikov, P.Yu.; Barsukov, O.V. [and others

    1994-12-01

    More stringent quality requirements are being imposed on oil fuels because of the deteriorating ecological situation. At the same time the new ecological constraints have slightly reduced the supplies of light crudes on the world market because the oil-producing countries have been forced to consume more of their best crudes and only heavier and sour crudes are sent to other countries for refining. In view of this, in recent years work has been focused on thorough refining of oil distillates and residues in a medium of hydrogen-containing gas in the presence of catalysts for hydrorefining and hydrocracking. Hydrorefining destroys sulfur-, nitrogen-, and oxygen-containing compounds of the stock, removes organometallic components, improves the ecological characteristics of the products, reduces the corrosion of the refinery equipment, and reduces atmospheric pollution. Hydrorefining units have been built at almost all refineries, with allowance for the above and the fact that the hydroprocesses are highly technologically suitable and controllable and produce almost no waste. A number of problems pertaining to hydroprocesses, interesting scientific results, and developed theoretical approaches to intensify hydrorefining processes are described.

  14. Projected refined product balances in key Latin American countries: A preliminary examination

    SciTech Connect (OSTI)

    NONE

    1996-06-01

    Over the years, the East-West Center (EWC) has developed considerable expertise in refinery modeling, especially in the area of forecasting product balances for countries, given planned capacity changes, changes in product demand, changes in crude slates, and changes in product specifications. This expertise has been applied on an ongoing basis to the major refiners in the Middle East and the Asia-Pacific region, along with the US West Coast as region in its own right. Refinery modeling in these three areas has been ongoing for nearly 15 years at the Center, and the tools and information sources are now well developed. To date, the EWC has not applied these tools to Latin America. Although research on Latin America has been an ongoing area of concern at the Center in recent years, the information gathered to date is still not of the level of detail nor quality available for other areas. The modeling efforts undertaken in this report are of a ``baseline`` nature, designed to outline the major issues, attempt a first cut at emerging product balances, and, above all, to elicit commentary from those directly involved in the oil industry in the key countries modeled. Our experience in other regions has shown that it takes a few years dialogue with refiners and government planner in individual countries to develop a reliable database, as well as the insights into operational constraints and practices that make accurate modeling possible. This report is no more than a first step down the road.

  15. Conformation-dependent backbone geometry restraints set a new standard for protein crystallographic refinement

    SciTech Connect (OSTI)

    Moriarty, Nigel W.; Tronrud, Dale E.; Adams, Paul D.; Karplus, P. Andrew

    2014-06-17

    Ideal values of bond angles and lengths used as external restraints are crucial for the successful refinement of protein crystal structures at all but the highest of resolutions. The restraints in common usage today have been designed based on the assumption that each type of bond or angle has a single ideal value independent of context. However, recent work has shown that the ideal values are, in fact, sensitive to local conformation, and as a first step toward using such information to build more accurate models, ultra-high resolution protein crystal structures have been used to derive a conformation-dependent library (CDL) of restraints for the protein backbone (Berkholz et al. 2009. Structure. 17, 1316). Here, we report the introduction of this CDL into the Phenix package and the results of test refinements of thousands of structures across a wide range of resolutions. These tests show that use of the conformation dependent library yields models that have substantially better agreement with ideal main-chain bond angles and lengths and, on average, a slightly enhanced fit to the X-ray data. No disadvantages of using the backbone CDL are apparent. In Phenix usage of the CDL can be selected by simply specifying the cdl=True option. This successful implementation paves the way for further aspects of the context-dependence of ideal geometry to be characterized and applied to improve experimental and predictive modelling accuracy.

  16. Refined Holographic Entanglement Entropy for the AdS Solitons and AdS black Holes

    E-Print Network [OSTI]

    Masafumi Ishihara; Feng-Li Lin; Bo Ning

    2013-04-04

    We consider the refinement of the holographic entanglement entropy for the holographic dual theories to the AdS solitons and AdS black holes, including the corrected ones by the Gauss-Bonnet term. The refinement is obtained by extracting the UV-independent piece of the holographic entanglement entropy, the so-called renormalized entanglement entropy which is independent of the choices of UV cutoff. Our main results are (i) the renormalized entanglement entropies of the AdS$_{d+1}$ soliton for $d=4,5$ are neither monotonically decreasing along the RG flow nor positive definite, especially around the deconfinement/confinement phase transition; (ii) there is no topological entanglement entropy for AdS$_5$ soliton even with Gauss-Bonnet correction; (iii) for the AdS black holes, the renormalized entanglement entropy obeys an expected volume law at IR regime, and the transition between UV and IR regimes is a smooth crossover even with Gauss-Bonnet correction; (iv) based on AdS/MERA conjecture, we postulate that the IR fixed-point state for the non-extremal AdS soliton is a trivial product state.

  17. Conformation-dependent backbone geometry restraints set a new standard for protein crystallographic refinement

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Moriarty, Nigel W.; Tronrud, Dale E.; Adams, Paul D.; Karplus, P. Andrew

    2014-06-17

    Ideal values of bond angles and lengths used as external restraints are crucial for the successful refinement of protein crystal structures at all but the highest of resolutions. The restraints in common usage today have been designed based on the assumption that each type of bond or angle has a single ideal value independent of context. However, recent work has shown that the ideal values are, in fact, sensitive to local conformation, and as a first step toward using such information to build more accurate models, ultra-high resolution protein crystal structures have been used to derive a conformation-dependent library (CDL)more »of restraints for the protein backbone (Berkholz et al. 2009. Structure. 17, 1316). Here, we report the introduction of this CDL into the Phenix package and the results of test refinements of thousands of structures across a wide range of resolutions. These tests show that use of the conformation dependent library yields models that have substantially better agreement with ideal main-chain bond angles and lengths and, on average, a slightly enhanced fit to the X-ray data. No disadvantages of using the backbone CDL are apparent. In Phenix usage of the CDL can be selected by simply specifying the cdl=True option. This successful implementation paves the way for further aspects of the context-dependence of ideal geometry to be characterized and applied to improve experimental and predictive modelling accuracy.« less

  18. Growth, microstructure, and field-emission properties of synthesized diamond film on adamantane-coated silicon substrate by microwave plasma chemical vapor deposition

    SciTech Connect (OSTI)

    Tiwari, Rajanish N.; Chang Li

    2010-05-15

    Diamond nucleation on unscratched Si surface is great importance for its growth, and detailed understanding of this process is therefore desired for many applications. The pretreatment of the substrate surface may influence the initial growth period. In this study, diamond films have been synthesized on adamantane-coated crystalline silicon {l_brace}100{r_brace} substrate by microwave plasma chemical vapor deposition from a gaseous mixture of methane and hydrogen gases without the application of a bias voltage to the substrates. Prior to adamantane coating, the Si substrates were not pretreated such as abraded/scratched. The substrate temperature was {approx}530 deg. C during diamond deposition. The deposited films are characterized by scanning electron microscopy, Raman spectrometry, x-ray diffraction, and x-ray photoelectron spectroscopy. These measurements provide definitive evidence for high-crystalline quality diamond film, which is synthesized on a SiC rather than clean Si substrate. Characterization through atomic force microscope allows establishing fine quality criteria of the film according to the grain size of nanodiamond along with SiC. The diamond films exhibit a low-threshold (55 V/{mu}m) and high current-density (1.6 mA/cm{sup 2}) field-emission (FE) display. The possible mechanism of formation of diamond films and their FE properties have been demonstrated.

  19. Self-consistent QM/MM methodologies for structural refinement of photosystem II and other macromolecules of biological interest

    SciTech Connect (OSTI)

    Batista, Enrique R [Los Alamos National Laboratory; Sproviero, Eduardo M [YALE UNIV; Newcomer, Michael [YALE UNIV; Gascon, Jose A [YALE UNIV; Batista, Victor S [YALE UNIV

    2008-01-01

    The combination of quantum mechanics and molecular mechanics (QM/MM) is one of the most promising approaches to study the structure, function, and properties of proteins and nucleic acids. However, there some instances in which the limitations of either the MM (lack of a proper electronic description) or QM (limited to a few number of atoms) methods prevent a proper description of the system. To address this issue, we review here our approach to fine-tune the structure of biological systems using post-QM/MM refinements. These protocols are based on spectroscopy data, and/or partitioning of the system to extend the QM description to a larger region of a protein. We illustrate these methodologies through applications to several biomolecules, which were pre-optimized at the QM/MM level and then further refined using postQM/MM refinement methodologies: mod(QM/MM), which refines the atomic charges of the residues included in the MM region accounting for polarization effects; mod(QM/MM)-opt that partition the MM region in smaller parts and optimizes each part in an iterative. self-consistent way, and the Polarized-Extended X-Ray Absorption Fine Structure (P-EXAFS) fitting procedure, which fine-tune the atomic coordinates to reproduce experimental polarized EXAFS spectra. The first two techniques were applied to the guanine quadruplex. while the P-EXAFS refinement was applied to the oxygen evolving complex of photosystem II.

  20. A neutral oxygen-vacancy center in diamond: A plausible qubit candidate and its spintronic and electronic properties

    SciTech Connect (OSTI)

    Zhang, Y. G.; Tang, Z. Zhao, X. G.; Cheng, G. D.; Tu, Y.; Cong, W. T.; Zhu, Z. Q.; Chu, J. H.; Peng, W.

    2014-08-04

    Spintronic and electronic properties of a neutral oxygen-vacancy (O-V) center, an isoelectronic defect similar to the negatively charged nitrogen-vacancy center in diamond, were studied by combining first-principles calculations and a mean-field theory for spin hyperfine interaction. It is elucidated that the neutral O-V center is stable in the p-type diamond and possesses an S?=?1 triplet ground state and four spin-conserved excited states with the spin coherence times in an order of second at T?=?0?K. The results indicate that the neutral O-V center is another promising candidate for spin coherent manipulation and qubit operation.

  1. Levitation and collection of diamond fine particles in the rf plasma chamber equipped with a hot filament

    SciTech Connect (OSTI)

    Shimizu, S.; Shimizu, T.; Thomas, H. M.; Morfill, G. E.; Jacob, W.

    2011-11-15

    We demonstrate the levitation of diamond fine particles in a H{sub 2} rf plasma chamber equipped with a hot filament and heated electrodes. The levitation conditions should be carefully chosen to compensate the strong thermophoretic forces caused by the filament and the electrodes. This levitation technique with the existence of a hot filament can be applied, e.g., for the efficient growth of diamond layers on seed particles injected and levitated in an rf plasma with reactive gases, e.g., CH{sub 4}/H{sub 2}. Additionally, the method for direct capture of levitated particles on a planar substrate was established, which is useful if it is necessary to analyze the particles after the levitation.

  2. Direct observation and mechanism for enhanced field emission sites in platinum ion implanted/post-annealed ultrananocrystalline diamond films

    SciTech Connect (OSTI)

    Panda, Kalpataru E-mail: phy.kalpa@gmail.com; Inami, Eiichi; Sugimoto, Yoshiaki; Sankaran, Kamatchi J.; Tai, Nyan Hwa; Lin, I-Nan

    2014-10-20

    Enhanced electron field emission (EFE) properties for ultrananocrystalline diamond (UNCD) films upon platinum (Pt) ion implantation and subsequent post-annealing processes is reported, viz., low turn-on field of 4.17?V/?m with high EFE current density of 5.08?mA/cm{sup 2} at an applied field of 7.0?V/?m. Current imaging tunneling spectroscopy (CITS) mode in scanning tunneling spectroscopy directly revealed the increased electron emission sites density for Pt ion implanted/post-annealed UNCD films than the pristine one. The high resolution CITS mapping and local current–voltage characteristic curves demonstrated that the electrons are dominantly emitted from the diamond grain boundaries and Pt nanoparticles.

  3. Direct first-principles simulation of a high-performance electron emitter: Lithium-oxide-coated diamond surface

    SciTech Connect (OSTI)

    Miyamoto, Yoshiyuki, E-mail: yoshi-miyamoto@aist.go.jp; Miyazaki, Takehide [Nanosystem Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Central 2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Takeuchi, Daisuke; Yamasaki, Satoshi [Energy Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Central 2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); JST, ALCA, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan)

    2014-09-28

    We examined the field emission properties of lithium(Li)/oxygen(O)-co-terminated diamond (001) surface [C(001)-LiO] through real-time electron dynamics simulation under an applied field. The current emitted from this surface was found to be more than four-fold that emitted by an H-terminated (001) surface, the latter being a typical negative electron affinity system. This high performance is attributed to the Li layer, which bends the potential wall of O-induced electron pockets down in the direction of vacuum, thus facilitating electron emission. Detailed analysis of the emitted electrons and the profile of the self-consistent potential elucidated that the role of O atoms changes from an electron barrier on OH-terminated diamond surfaces to an outlet for electron emission on C(001)-LiO.

  4. Improving macromolecular atomic models at moderate resolution by automated iterative model building, statistical density modification and refinement

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Mail Stop M888, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2003-07-01

    A procedure for iterative model-building, statistical density modification and refinement at moderate resolution (up to about 2.8 Å) is described. An iterative process for improving the completeness and quality of atomic models automatically built at moderate resolution (up to about 2.8 Å) is described. The process consists of cycles of model building interspersed with cycles of refinement and combining phase information from the model with experimental phase information (if any) using statistical density modification. The process can lead to substantial improvements in both the accuracy and completeness of the model compared with a single cycle of model building. For eight test cases solved by MAD or SAD at resolutions ranging from 2.0 to 2.8 Å, the fraction of models built and assigned to sequence was 46–91% (mean of 65%) after the first cycle of building and refinement, and 78-95% (mean of 87%) after 20 cycles. In an additional test case, an incorrect model of gene 5 protein (PDB code 2gn5; r.m.s.d. of main-chain atoms from the more recent refined structure 1vqb at 1.56 Å) was rebuilt using only structure-factor amplitude information at varying resolutions from 2.0 to 3.0 Å. Rebuilding was effective at resolutions up to about 2.5 Å. The resulting models had 60-80% of the residues built and an r.m.s.d. of main-chain atoms from the refined structure of 0.20 to 0.62 Å. The algorithm is useful for building preliminary models of macromolecules suitable for an experienced crystallographer to extend, correct and fully refine.

  5. Core-Shell Diamond as a Support for Solid-Phase Extraction and High-Performance Liquid Chromatography

    SciTech Connect (OSTI)

    Saini, Gaurav; Jensen, David S.; Wiest, Landon A.; Vail, Michael A.; Dadson, Andrew; Lee, Milton L.; Shutthanandan, V.; Linford, Matthew R.

    2010-06-01

    We report the formation of core-shell diamond particles for solid phase extraction (SPE) and high performance liquid chromatography (HPLC) made by layer-by-layer (LbL) deposition. Their synthesis begins with the amine functionalization of microdiamond by its immersion in an aqueous solution of a primary amine-containing polymer (polyallylamine (PAAm)). The amine-terminated microdiamond is then immersed in an aqueous suspension of nanodiamond, which leads to adsorption of the nanodiamond. Alternating (self-limiting) immersions in the solutions of the amine-containing polymer and the suspension of nanodiamond are continued until the desired number of nanodiamond layers is formed around the microdiamond. Finally, the core-shell particles are cross-linked with 1,2,5,6-diepoxycyclooctane or reacted with 1,2-epoxyoctadecane. Layer-by-layer deposition of PAAm and nanodiamond is also studied on planar Si/SiO2 surfaces, which were characterized by SEM, Rutherford backscattering spectrometry (RBS) and nuclear reaction analysis (NRA). Core-shell particles are characterized by diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), environmental scanning electron microscopy (ESEM), and Brunauer Emmett Teller (BET) surface area and pore size measurements. Larger (ca. 50 ?m) core-shell diamond particles have much higher surface areas, and analyte loading capacities in SPE than nonporous solid diamond particles. Smaller (ca. 3 ?m), normal and reversed phase, core-shell diamond particles have been used for HPLC, with 36,300 plates per meter for mesitylene in a separation of benzene and alkyl benzenes on a C18 adsorbent, and 54,800 plates per meter for diazinon in a similar separation of two pesticides.

  6. High-pressure effect on dislocation density in nanosize diamond crystals C. Panteaa,*, J. Gubiczab,c

    E-Print Network [OSTI]

    Gubicza, Jenõ

    materials are different from the coarse-grained materials. Diamond nanosize crystals attracted a lot manufacturing, high-pressure and high-tempera- ture treatment may affect structure and properties of crystalsD2 (3 GPa), nD3 (5.5 GPa), and nD4 (8.0 GPa) and the raw powder nD0. In the case of experiments

  7. Operation of an ungated diamond field-emission array cathode in a L-band radiofrequency electron source

    SciTech Connect (OSTI)

    Piot, P. [Northern Illinois Center for Accelerator and Detector Development and Department of Physics, Northern Illinois University, DeKalb, Illinois 60115 (United States); Accelerator Physics Center, Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States); Brau, C. A.; Gabella, W. E.; Ivanov, B.; Mendenhall, M. H. [Department of Physics and Astronomy, Vanderbilt University, Nashville, Tennessee 37235 (United States); Choi, B. K. [Department of Electrical Engineering and Computer Science, Vanderbilt University, Nashville, Tennessee 37235 (United States); Vanderbilt Institute of Nanoscale Science and Engineering, Vanderbilt University, Nashville, Tennessee 37235 (United States); Blomberg, B.; Mihalcea, D.; Panuganti, H. [Northern Illinois Center for Accelerator and Detector Development and Department of Physics, Northern Illinois University, DeKalb, Illinois 60115 (United States); Jarvis, J. [Advanced Energy Systems, Inc., Medford, New York 11763 (United States); Prieto, P.; Reid, J. [Accelerator Division, Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)

    2014-06-30

    We report on the operation of a field-emitter-array cathode in a conventional L-band radio-frequency electron source. The cathode consisted of an array of ?10{sup 6} diamond tips on pyramids. Maximum current on the order of 15?mA was reached and the cathode did not show appreciable signs of fatigue after weeks of operation. The measured Fowler-Nordheim characteristics, transverse beam density, and current stability are discussed.

  8. The effect of substrate temperature and growth rate on the doping efficiency of single crystal boron doped diamond

    SciTech Connect (OSTI)

    Demlow, SN; Rechenberg, R; Grotjohn, T

    2014-10-01

    The substrate growth temperature dependence of the plasma gas-phase to solid-phase doping efficiency in single crystal, boron doped diamond (BDD) deposition is investigated. Single crystal diamond (SCD) is grown by microwave plasma assisted chemical vapor deposition (MPACVD) on high pressure, high temperature (HPHT) type Ib substrates. Samples are grown at substrate temperatures of 850-950 degrees C for each of five doping concentration levels, to determine the effect of the growth temperature on the doping efficiency and defect morphology. The substrate temperature during growth is shown to have a significant effect on the grown sample defect morphology, and a temperature dependence of the doping efficiency is also shown. The effect of the growth rate on the doping efficiency is discussed, and the ratio of the boron concentration in the gas phase to the flux of carbon incorporated into the solid diamond phase is shown to be a more predictive measure of the resulting boron concentration than the gas phase boron to carbon ratio that is more commonly reported. (C) 2014 Elsevier B.V. All rights reserved.

  9. Iterative build OMIT maps: Map improvement by iterative model-building and refinement without model bias

    SciTech Connect (OSTI)

    Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545, USA; Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720, USA; Department of Haematology, University of Cambridge, Cambridge CB2 0XY, England; Terwilliger, Thomas; Terwilliger, T.C.; Grosse-Kunstleve, Ralf Wilhelm; Afonine, P.V.; Moriarty, N.W.; Zwart, P.H.; Hung, L.-W.; Read, R.J.; Adams, P.D.

    2008-02-12

    A procedure for carrying out iterative model-building, density modification and refinement is presented in which the density in an OMIT region is essentially unbiased by an atomic model. Density from a set of overlapping OMIT regions can be combined to create a composite 'Iterative-Build' OMIT map that is everywhere unbiased by an atomic model but also everywhere benefiting from the model-based information present elsewhere in the unit cell. The procedure may have applications in the validation of specific features in atomic models as well as in overall model validation. The procedure is demonstrated with a molecular replacement structure and with an experimentally-phased structure, and a variation on the method is demonstrated by removing model bias from a structure from the Protein Data Bank.

  10. Refining the classification of the irreps of the 1D N-Extended Supersymmetry

    E-Print Network [OSTI]

    Kuznetsova, Z; Kuznetsova, Zhanna; Toppan, Francesco

    2007-01-01

    In hep-th/0511274 the classification of the fields content of the linear finite irreducible representations of the algebra of the 1D N-Extended Supersymmetric Quantum Mechanics was given. In hep-th/0611060 it was pointed out that certain irreps with the same fields content can be regarded as inequivalent. This result can be understood in terms of the "connectivity" properties of the graphs associated to the irreps. We present here a classification of the connectivity of the irreps, refining the hep-th/0511274 classification based on fields content. As a byproduct, we find a counterexample to the hep-th/0611060 claim that the connectivity is uniquely specified by the "sources" and "targets" of an irrep graph. We produce one pair of N=5 irreps and three pairs of N=6 irreps with the same number of sources and targets which, nevertheless, differ in connectivity.

  11. Lance for fuel and oxygen injection into smelting or refining furnace

    DOE Patents [OSTI]

    Schlichting, Mark R. (Chesterton, IN)

    1994-01-01

    A furnace 10 for smelting iron ore and/or refining molten iron 20 is equipped with an overhead pneumatic lance 40, through which a center stream of particulate coal 53 is ejected at high velocity into a slag layer 30. An annular stream of nitrogen or argon 51 enshrouds the coal stream. Oxygen 52 is simultaneously ejected in an annular stream encircling the inert gas stream 51. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus 84 to react with carbon monoxide gas rising from slag layer 30, thereby adding still more heat to the furnace.

  12. Methods of refining natural oils and methods of producing fuel compositions

    SciTech Connect (OSTI)

    Firth, Bruce E; Kirk, Sharon E; Gavaskar, Vasudeo S

    2015-11-04

    A method of refining a natural oil includes: (a) providing a feedstock that includes a natural oil; (b) reacting the feedstock in the presence of a metathesis catalyst to form a metathesized product that includes olefins and esters; (c) passivating residual metathesis catalyst with an agent selected from the group consisting of phosphorous acid, phosphinic acid, and a combination thereof; (d) separating the olefins in the metathesized product from the esters in the metathesized product; and (e) transesterifying the esters in the presence of an alcohol to form a transesterified product and/or hydrogenating the olefins to form a fully or partially saturated hydrogenated product. Methods for suppressing isomerization of olefin metathesis products produced in a metathesis reaction, and methods of producing fuel compositions are described.

  13. Methods of refining natural oils, and methods of producing fuel compositions

    SciTech Connect (OSTI)

    Firth, Bruce E.; Kirk, Sharon E.

    2015-10-27

    A method of refining a natural oil includes: (a) providing a feedstock that includes a natural oil; (b) reacting the feedstock in the presence of a metathesis catalyst to form a metathesized product that includes olefins and esters; (c) passivating residual metathesis catalyst with an agent that comprises nitric acid; (d) separating the olefins in the metathesized product from the esters in the metathesized product; and (e) transesterifying the esters in the presence of an alcohol to form a transesterified product and/or hydrogenating the olefins to form a fully or partially saturated hydrogenated product. Methods for suppressing isomerization of olefin metathesis products produced in a metathesis reaction, and methods of producing fuel compositions are described.

  14. Lance for fuel and oxygen injection into smelting or refining furnace

    DOE Patents [OSTI]

    Schlichting, M.R.

    1994-12-20

    A furnace for smelting iron ore and/or refining molten iron is equipped with an overhead pneumatic lance, through which a center stream of particulate coal is ejected at high velocity into a slag layer. An annular stream of nitrogen or argon enshrouds the coal stream. Oxygen is simultaneously ejected in an annular stream encircling the inert gas stream. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus to react with carbon monoxide gas rising from slag layer, thereby adding still more heat to the furnace. 7 figures.

  15. Early F-type stars - refined classification, confrontation with Stromgren photometry, and the effects of rotation

    SciTech Connect (OSTI)

    Gray, R.O.; Garrison, R.F.

    1989-02-01

    The classification for early F-type stars in the MK spectral classification system presented by Gray and Garrison (1987) is refined. The effect of rotation on spectral classification and ubvy-beta photometry of early F-type stars is examined. It is found that the classical luminosity criterion, the 4417 A/4481 A ratio gives inconsistent results. It is shown that most of the stars in the Delta Delphini class of metallic-line stars are either normal or are indistinguishable from proto-Am stars. It is suggested that the designation Delta Delphini should be dropped. The classifications are compared with Stromgren photometry. The effects of rotation on the delta-c sub 1 index in the early-F field dwarfs is demonstrated. 55 references.

  16. A node-centered local refinement algorithm for poisson's equation in complex geometries

    SciTech Connect (OSTI)

    McCorquodale, Peter; Colella, Phillip; Grote, David P.; Vay, Jean-Luc

    2004-05-04

    This paper presents a method for solving Poisson's equation with Dirichlet boundary conditions on an irregular bounded three-dimensional region. The method uses a nodal-point discretization and adaptive mesh refinement (AMR) on Cartesian grids, and the AMR multigrid solver of Almgren. The discrete Laplacian operator at internal boundaries comes from either linear or quadratic (Shortley-Weller) extrapolation, and the two methods are compared. It is shown that either way, solution error is second order in the mesh spacing. Error in the gradient of the solution is first order with linear extrapolation, but second order with Shortley-Weller. Examples are given with comparison with the exact solution. The method is also applied to a heavy-ion fusion accelerator problem, showing the advantage of adaptivity.

  17. 3D Adaptive Mesh Refinement Simulations of Pellet Injection in Tokamaks

    SciTech Connect (OSTI)

    R. Samtaney; S.C. Jardin; P. Colella; D.F. Martin

    2003-10-20

    We present results of Adaptive Mesh Refinement (AMR) simulations of the pellet injection process, a proven method of refueling tokamaks. AMR is a computationally efficient way to provide the resolution required to simulate realistic pellet sizes relative to device dimensions. The mathematical model comprises of single-fluid MHD equations with source terms in the continuity equation along with a pellet ablation rate model. The numerical method developed is an explicit unsplit upwinding treatment of the 8-wave formulation, coupled with a MAC projection method to enforce the solenoidal property of the magnetic field. The Chombo framework is used for AMR. The role of the E x B drift in mass redistribution during inside and outside pellet injections is emphasized.

  18. Astrophysical hydrodynamics with a high-order discontinuous Galerkin scheme and adaptive mesh refinement

    E-Print Network [OSTI]

    Schaal, Kevin; Chandrashekar, Praveen; Pakmor, Rüdiger; Klingenberg, Christian; Springel, Volker

    2015-01-01

    Solving the Euler equations of ideal hydrodynamics as accurately and efficiently as possible is a key requirement in many astrophysical simulations. It is therefore important to continuously advance the numerical methods implemented in current astrophysical codes, especially also in light of evolving computer technology, which favours certain computational approaches over others. Here we introduce the new adaptive mesh refinement (AMR) code TENET, which employs a high-order Discontinuous Galerkin (DG) scheme for hydrodynamics. The Euler equations in this method are solved in a weak formulation with a polynomial basis by means of explicit Runge-Kutta time integration and Gauss-Legendre quadrature. This approach offers significant advantages over commonly employed finite volume (FV) solvers. In particular, the higher order capability renders it computationally more efficient, in the sense that the same precision can be obtained at significantly less computational cost. Also, the DG scheme inherently conserves a...

  19. Petroleum refining industry of developed capitalist countries in the 1990s

    SciTech Connect (OSTI)

    Prokhorova, A.A.

    1994-07-01

    Crude oil is the principal source of energy today and in the immediate future. The increases in the consumption of crude oil (1.7% per year up to 2005) will be offset mainly by additional supplies from the countries of the Near East. Data on the imports of oil by the developed capitalists countries are presented in Table 2. In the United States, according to a projection made by Conoco, by the year 2000 the volume of imports will be twice the volume of domestic production; according to another prediction, the amount of Near East crude will increase from 34% in 1990 to 42% in 2000. Since the mid-1980s, the energy policy of the USA has been based on importing so-called cheap crude. Laws have been passed to mandate not only energy saving, but also cuts in the oil and gas production on U.S. territory. The volume of U.S. oil production will be 20% lower in 2000 than in 1990. Some 90% of the worldwide demand for oil is met by light and medium-density crudes, but such crudes account for only 25% of the oil resources. Projections indicate that the oil supplied to refiners in the future will be heavier and will have higher sulfur contents. The U.S. production of low-sulfur crude will drop off sharply in the next 10-15 years. The drop in oil production of the CIS [former USSR] and the consequent drop in exports from these countries will have a destabilizing effect on the world market. The average price of the {open_quotes}market basket{close_quotes} of OPEC crudes in 1991 was $149/ton (in 1990 $178/ton), in comparison with a 1992 price of $148/ton. This report presents data on refining process capacities and the ratio of secondary capacity to primary distillation capacity.

  20. Errors Characteristics of Two Grid Refinement Approaches in Aquaplanet Simulations: MPAS-A and WRF

    SciTech Connect (OSTI)

    Hagos, Samson M.; Leung, Lai-Yung R.; Rauscher, Sara; Ringler, Todd

    2013-09-01

    This study compares the error characteristics associated with two grid refinement approaches including global variable resolution and nesting for high resolution regional climate modeling. The global variable resolution model, Model for Prediction Across Scales-Atmosphere (MPAS-A), and the limited area model, Weather Research and Forecasting (WRF) model, are compared in an idealized aqua-planet context. For MPAS-A, simulations have been performed with a quasi-uniform resolution global domain at coarse (1°) and high (0.25°) resolution, and a variable resolution domain with a high resolution region at 0.25° configured inside a coarse resolution global domain at 1° resolution. Similarly, WRF has been configured to run on a coarse (1°) and high (0.25°) tropical channel domain as well as a nested domain with a high resolution region at 0.25° nested two-way inside the coarse resolution (1°) tropical channel. The variable resolution or nested simulations are compared against the high resolution simulations. Both models respond to increased resolution with enhanced precipitation. Limited and significant reduction in the ratio of convective to non-convective precipitation. The limited area grid refinement induces zonal asymmetry in precipitation (heating), accompanied by zonal anomalous Walker like circulations and standing Rossby wave signals. Within the high resolution limited area, the zonal distribution of precipitation is affected by advection in MPAS-A and by the nesting strategy in WRF. In both models, 20 day Kelvin waves propagate through the high-resolution domains fairly unaffected by the change in resolution (and the presence of a boundary in WRF) but increased resolution strengthens eastward propagating inertio-gravity waves.