Powered by Deep Web Technologies
Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

SGP-TR-- 11 5 SGP-TR-- 11 5 DE88 012261 SGP-TR- 1 15 A Laboratory Investigation of Steam Adsorption in Geothermal Reservoir Rocks Jeralyn Luetkehans March 1988 Financial support was provided through the Stanford Geothermal Program under Department of Energy Contract Nos. DE-AS03-80SF11459 and DE-AS07-84ID12529 and by the Dept. of Petroleum Engineering, Stanford University Stanford Geothermal Program Interdisciplinary Research in Engineering and Earth Sciences STANFORD UNIVERSITY Stanford, California DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability cr responsi-

2

Disclaimer  

Office of Scientific and Technical Information (OSTI)

Disclaimer Disclaimer This report was prepared as an account of work by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness or any third party's use or the results of such use of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific

3

DISCLAIMER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DISCLAIMER DISCLAIMER This report was .prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness o f any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not

4

Disclaimer  

NLE Websites -- All DOE Office Websites (Extended Search)

Disclaimer Disclaimer This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of its employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors

5

Disclaimers | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

Submittal Basics Submittal Basics Disclaimers Print page Print page Email page Email page Disclaimers are to be used on all DOE STI products. The following are standard disclaimers to be used as appropriate. Please note that some contracts may include alternative disclaimers for use on STI Products. Full Legal Disclaimer This work was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or any third party's use or the results of such use of any information, apparatus, product, or process disclosed, or represents that

6

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

Lawrence Lawrence Livermore National Laboratory U.S. Department of Energy Approved for public release; further dissemination unlimited UCRL-ID-151619 Results from the First 249 Cf+ 48 Ca Experiment Y.T. Oganessian, V.K. Utyonkov, Y.V. Lobanov, F.S. Abdullin, A.N. Polyakov, I.V. Shirokovsky, Y.S. Tsyganov, A.N. Mezentsev, S. Iliev, V.G. Subbotin, A.M. Sukhov, O.V. Ivanov, A.A. Voinov, K. Subotic, V.I. Zagrebaev, M.G. Itkis, K.J. Moody, J.F. Wild, M.A. Stoyer, N.J. Stoyer, C.A. Laue, D.A. Shaughnessy, J.B. Patin, R.W. Lougheed February 3, 2003 DISCLAIMER This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for

7

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RECOVERY ACT FINANCIAL ASSISTANCE FUNDING OPPORTUNITY ANNOUNCEMENT U. S. Department of Energy Office of Electricity Delivery and Energy Reliability Smart Grid Investment Grant Program Funding Opportunity Number: DE-FOA-0000058 Announcement Type: Initial Announcement CFDA Number: 81.122 - Electricity Delivery and Energy Reliability Research, Development and Analysis Issue Date: June 25, 2009 Letter of Intent Due Date Application Due Dates July 16, 2009 August 06, 2009 at 8:00 PM, Eastern October 23, 2009 November 04, 2009 at 8:00 PM, Eastern February 10, 2010 March 03, 2010 at 8:00 PM, Eastern Submit Questions to: DOESGIGQuestions@HQ.DOE.GOV

8

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINANCIAL ASSISTANCE FUNDING OPPORTUNITY ANNOUNCEMENT U. S. Department of Energy Idaho Operations Office State Energy Efficient Appliance Rebate Program (SEEARP) American Recovery and Reinvestment Act (ARRA) Funding Opportunity Number: DE-FOA-0000119 Announcement Type: Initial CFDA Number: 81.127, Energy Efficient Appliance Rebate Program (EEARP) Issue Date: 07/14/2009 Initial Application Due Date: 08/15/2009 at 8:00:00 PM Eastern Time Comprehensive Application Due Date: 10/15/2009 at 8:00:00 PM Eastern Time 2 NOTE: REGISTRATION REQUIREMENTS Registration Requirements There are several one-time actions you must complete in order to submit an application in response to this Announcement (e.g., obtain a Dun and Bradstreet Data Universal Numbering System (DUNS) number,

9

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

Developers Parsivel2 Disdrometers OTT Hydromet GmbH Ludwigstrasse 16 87437 Kempten Germany www.ott.com In USA sold by Hach Hydromet P.O. Box 389 Loveland, CO 80539...

10

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

37 37 Energy Balance Bowen Ratio (EBBR) Handbook DR Cook February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research DR Cook, February 2011, DOE/SC-ARM/TR-037 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1 2.2 Instrument Developer ................................................................................................................... 1

11

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Recovery Act: Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO 2 Use Funding Opportunity Number: DE-FOA-0000015 Announcement Type: Amendment 001 CFDA Number: 81.089 Fossil Energy Research and Development FOA Issue Date: June 8, 2009 Amendment 001 Issue Date: July 17, 2009 Letter of Intent Due Date: Not Applicable Pre-Application Due Date: Not Applicable Application Due Date: August 7, 2009 at 8:00:00 PM Eastern Time Amendment 001 - The purpose of this amendment is to clarify that beneficial use that permanently prevents the CO 2 from entering the atmosphere is an allowable form of sequestration under Technology Area 1. A change has been made on

12

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINANCIAL ASSISTANCE FUNDING OPPORTUNITY ANNOUNCEMENT U.S. Department of Energy Golden Field Office Recovery Act: Development of Algal / Advanced Biofuels Consortia Funding Opportunity Announcement Number: DE-FOA-0000123 Announcement Type: Initial CFDA Number: 81.087 Issue Date: July 15, 2009 Application Due Date: September 14, 2009, 11:59 PM Eastern Time NOTE: Questions regarding the content of this announcement must be submitted through FedConnect. Applicants must be registered in FedConnect to submit or view Questions. 2 APPLICATION SUBMISSION, FEDCONNECT QUICK START GUIDE, REGISTRATION REQUIREMENTS, AND SUBMISSION OF QUESTIONS 1. Application Submission APPLICATIONS MUST BE SUBMITTED THROUGH FEDCONNECT AT https://www.fedconnect.net/ TO BE CONSIDERED FOR AWARD. The Adobe Application

13

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

-1- -1- DEVELOPMENT OF A SUPERSONIC ATOMIC OXYGEN NOZZLE BEAM SOURCE FOR CROSSED BEAM SCATTERING EXPERIMENTS S t e v e n J. S i b e n e r , R i c h a r d J. Buss and Yuan T. L e e Materials and M o l e c u l a r R e s e a r c h D i v i s i o n Lawrence B e r k e l e y L a b o r a t o r y and Department o f Chemistry U n i v e r s i t y of C a l i f o r n i a , B e r k e l e y , CA 94720 USA ABSTRACT A h i g h p r e s s u r e , s u p e r s o n i c , r a d i o f r e q u e n c y d i s c h a r g e n o z z l e beam s o u r c e h a s b e e n d e v e l o p e d f o r t h e p r o d u c t i o n o f i n t e n s e beams of ground s t a t e oxygen atoms. An e f f i c i e n t impedance m a t c h i n g scheme h a s b e e n d e v i s e d f o r c o u p l i n g t h e r a d i o f r e q u e n c y power t o t h e plasma as a f u n c t i o n o f b o t h g a s p r e s s u r e and c o m p o s i t i o n . T e c h n i q u e s f o r l o c a l i z i n g t h e d i s - c h a r g e d i r e c t l y b e h i n d t h e o r i f i c e of a w a t e r - c o o l e d q u a r t z n o z z l e h a v e a l s o b e e n d

14

Privacy, Security, & Legal Disclaimer Notice - Hanford Site  

NLE Websites -- All DOE Office Websites (Extended Search)

About Us > Privacy, Security, & Legal Disclaimer Notice About Us Hanford Overview and History Hanford Cleanup Hanford Site Wide Programs Privacy, Security, & Legal Disclaimer...

15

DISCLAIMER: | Department of Energy  

Office of Environmental Management (EM)

DISCLAIMER: DISCLAIMER: DISCLAIMER: More Documents & Publications Recovery Act: Wind Energy Consortia between Institutions of Higher Learning and Industry Microsoft Word -...

16

DISCLAIMER: | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DISCLAIMER: DISCLAIMER: DISCLAIMER: More Documents & Publications Microsoft Word - rDE-FOA-0000080.rtf Recovery Act: Clean Coal Power Initiative Microsoft Word - vDE-FOA-0000042...

17

DISCLAIMER T  

Office of Scientific and Technical Information (OSTI)

DISCLAIMER DISCLAIMER T h i i report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof. nor any of their employees, makes any warranty. express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- mendation, or favoring by the United States Government or any agency thereof. The views

18

I DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

I I DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the Unitai States Government nor any agency thereof, nor any of their employt#, makes any warranty, express or implid, or assumes any legal liability or responsibility for the accuracy, completeness, or use- fulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe ptivately owned rights. Reference herein to any rpc- afic commercial product, praxss, or =Nice by trade name, trademark, manufac- turer, or otherwise does not necessarily constitute or imply its endorsement. m m - mendation. or favoring by the United States Government or any agency thereof. The views and opinions of authors exprtssed herein do not necessarily state or

19

DISCLAIMER This  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DISCLAIMER This repofi was.prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privateiy owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

20

Fermilab Disclaimer  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab Disclaimer Fermi National Accelerator Laboratory Fermi Research Alliance, LLC. Security Notice This web site is served by a computer system on a U.S. Government owned network. The Department of Energy and Fermilab computer security personnel monitor this web site for security purposes to ensure it remains available to all users and to protect information in the system. By accessing this web site, you are expressly consenting to these monitoring activities. Unauthorized attempts to defeat or circumvent security features, to use the system for other than intended purposes, to deny service to authorized users, to access, obtain, alter, damage, or destroy information, or otherwise to interfere with the system or its operation are prohibited. Evidence of such acts may be disclosed to law enforcement authorities and result in criminal prosecution under the Computer Fraud and Abuse Act of 1986 (Pub. L. 99-474) and the National Information Infrastructure Protection Act of 1996 (Pub. L. 104-294), (18 U.S.C. 1030), or other applicable criminal laws.

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Export.gov - Disclaimer  

NLE Websites -- All DOE Office Websites (Extended Search)

Disclaimer Statement Disclaimer Statement Note: Export.gov is managed by the International Trade Administration and follows its disclaimer Statement. International Trade Administration Disclaimer Statement: Links to Web sites outside the U.S. Federal Government or the use of trade, firm, or corporation names within the International Trade Administration Web sites (export.gov and trade.gov) are for the convenience of the user. Such use does not constitute an official endorsement or approval by the U.S. Commerce Department of any private sector Web site, product, or service. When users select a link to another government or non-government Web site, and they leave the trade.gov Web site be aware that you are subject to the privacy and security policies of the owners/sponsors of the outside Web

22

Contract No. and Disclaimer:  

Office of Scientific and Technical Information (OSTI)

Contract No. and Disclaimer: This manuscript has been authored by Savannah River Nuclear Solutions, LLC under Contract No. DE-AC09-08SR22470 with the U.S. Department of Energy. The...

23

Program Development  

SciTech Connect

This presentation covers how to go about developing a human reliability program. In particular, it touches on conceptual thinking, raising awareness in an organization, the actions that go into developing a plan. It emphasizes evaluating all positions, eliminating positions from the pool due to mitigating factors, and keeping the process transparent. It lists components of the process and objectives in process development. It also touches on the role of leadership and the necessity for audit.

Atencio, Julian J.

2014-05-01T23:59:59.000Z

24

Alternative Fuels Data Center: Disclaimer  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

AFDC AFDC Printable Version Share this resource Send a link to Alternative Fuels Data Center: Disclaimer to someone by E-mail Share Alternative Fuels Data Center: Disclaimer on Facebook Tweet about Alternative Fuels Data Center: Disclaimer on Twitter Bookmark Alternative Fuels Data Center: Disclaimer on Google Bookmark Alternative Fuels Data Center: Disclaimer on Delicious Rank Alternative Fuels Data Center: Disclaimer on Digg Find More places to share Alternative Fuels Data Center: Disclaimer on AddThis.com... Disclaimer The U.S. Department of Energy's (DOE) Alternative Fuels Data Center (AFDC) offers a wealth of information in the form of text, drawings, specifications, images, maps, and databases. This information combines research results, data analysis, descriptions of laws and incentives,

25

Staff Handbook DISCLAIMER  

E-Print Network (OSTI)

Staff Handbook #12;DISCLAIMER This staff handbook does not create any rights or benefits. The policies and information referenced in this handbook currently apply to all full- and part-time salaried policies and benefits, some of which are discussed in this handbook, are subject to change at any time

Buehrer, R. Michael

26

RADIATION LABORATO DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

R : R : . . . RADIATION LABORATO DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

27

DiscLAimEr  

NLE Websites -- All DOE Office Websites (Extended Search)

mAy 2013 mAy 2013 DiscLAimEr This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal li- ability or responsibility for the accuracy, completeness, or useful- ness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommenda- tion, or favoring by the United States Government or any agency

28

DISCLAIMER: | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Davis Bacon Act Applicability to Smart Grid Investment Grant (SGIG) Program Grants Smart Grid Investment Grant Program - Progress Report (October 2013) Grantsdown.xls...

29

SES CANDIDATE DEVELOPMENT PROGRAM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CANDIDATE DEVELOPMENT PROGRAM (SESCDP) CANDIDATE DEVELOPMENT PROGRAM (SESCDP) DOE F 360.1 (11-03) Executive Development Plan (EDP) Name: Title: Organization: Office: RATIONALE FOR PLAN: APPROVALS: Candidate Signature: Date: Supervisor: Date: Mentor: Date: SES Candidate Development Program Manager: Date: DOE Executive Resources Board: Date: 1 U.S. DEPARTMENT OF ENERGY DOE F 360.1 (11-03) SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Executive Development Plan (EDP) NAME OF SES CANDIDATE: DATE: EXECUTIVE CORE QUALIFICATION 1: LEADING CHANGE This core qualification encompasses the ability to develop and implement an organizational vision which integrates key national and program

30

Acquisition Career Development Program  

Directives, Delegations, and Requirements

This Order establishes training and certification requirements and career development programs under the Acquisition Career Development (ACD) Program for DOE and NNSA acquisition workforce. The acquisition workforce includes contracting, purchasing, personal property management, program management, Contracting Officers and Contracting Officer Representatives. The ACD Program implements the Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the objectives of Executive Order (E.O.) 129231, Federal Procurement Reform, dated 10-13-1994. This order cancels DOE O 361.1, Acquisition Career Development Program, dated 11-10-99, AND Acquisition Letter 2003-05, Personal Property Management Career Development, Training, and Certification Program, dated 9-10-03. Cancels DOE O 361.1 Chg 2. Canceled by DOE O 361.1B.

2004-04-19T23:59:59.000Z

31

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

9 9 Surface Temperature Humidity Reference System (SURTHREF) User Manual February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research February 2011, DOE/SC-ARM/TR-069 iii Contents 1.0 Surface Temperature Humidity Reference System .............................................................................. 1 1.1 Purpose ...................................................................................................................................... 1 1.2 References ................................................................................................................................. 1 1.3 Components ............................................................................................................................... 1

32

DISCLAIMER  

Office of Legacy Management (LM)

This report was prepared as an account of work sponsored by an This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein

33

DISCLAIMER  

Office of Legacy Management (LM)

This report has been,reproduced directly from the best available copy. This report has been,reproduced directly from the best available copy. r, . Available to DOE and DOE contractors fiom the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 3783 1; prices available from (423) 576-840 1. e Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port'Royal Rd., Springfield, VA 22 16 1, telephone (703) 487-4650. This page intentionally left blank i RULISON SITE GROUNDWATER MONITORING REPORT FOURTH QUARTER, 1997 DOE Nevada Operations Office Las Vegas, Nevada February 1998 Approved for public release; further dissemination unlimited. RULISON SITE GROUNDWATER MONITORING REPORT FOURTH QUARTER, 1997 Approved by: Monica Sanchez, Project Manager Date: 2

34

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

080 080 Microwave Radiometer - High Frequency (MWRHF) Handbook MP Cadeddu March 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research MP Cadeddu, March 2011, DOE/SC-ARM-TR-080 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1

35

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Local Energy Assurance Planning (LEAP) Initiative Funding Opportunity Number: DE-FOA-0000098 Announcement Type: Initial CFDA Number: 81.122 Issue Date: 07/20/2009 Letter of Intent Due Date: Not Applicable Pre-Application Due Date: Not Applicable Application Due Date: 10/08/2009 at 3:00:00 PM Eastern Time DE-FOA-0000098 Page 1 of 26 NOTE: REGISTRATION/SUBMISSION REQUIREMENTS Registration Requirements There are several one-time actions you must complete in order to submit an application in response to this Announcement (e.g., obtain a Dun and Bradstreet Data Universal Numbering System (DUNS) number, register with the Central Contractor Registration (CCR), and register

36

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

ARM-TR-090 ARM-TR-090 Tandem Differential Mobility Analyzer/Aerodynamic Particle Sizer (APS) Handbook Don Collins June 2010 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research D Collins, June 2010, DOE/SC-ARM-TR-090 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1

37

Disclaimer  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

make any warranty, express or implied, or assumes make any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe upon privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendations, or favoring by the United States Government. The views and opinions expressed by the authors herein do not necessarily state or reflect those of the

38

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINANCIAL ASSISTANCE FINANCIAL ASSISTANCE FUNDING OPPORTUNITY ANNOUNCEMENT U. S. Department of Energy National Energy Technology Laboratory Recovery Act - Solid-State Lighting Core Technologies Funding Opportunity - Round VI Funding Opportunity Number: DE-FOA-0000082 Announcement Type: Amendment No. 001 CFDA Number: 81.086 Issue Date: 07/10/2009 Letter of Intent Due Date: Not Applicable Pre-Application Due Date: Not Applicable Application Due Date: 08/10/2009 at 3:00:00 PM Eastern Time The purpose of this amendment is to make an administrative change on page 23, as delineated in bold italicized text. NOTE: REGISTRATION/SUBMISSION REQUIREMENTS Registration Requirements There are several one-time actions you must complete in order to submit an application in

39

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

an agency of the an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of

40

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

29 29 Balloon-Borne Sounding System (SONDE) Handbook D Holdridge J Prell M Ritsche R Coulter February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research D Holdridge et al., February 2011, ARM-TR-029 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentors ........................................................................................................................................ 1

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

06 06 Ka-Band ARM Zenith Radar (KAZR) K Widener N Bharadwaj K Johnson February 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research K Widener/N Bharadwaj/K Johnson, February 2012, DOE/SC-ARM/TR-106 iii Acronyms and Abbreviations ARM Atmospheric Radiation Measurement (Climate Research Facility) ARSCL Active Remote Sensing of Clouds C band frequencies between 4 GHz and 8 GHz dB decibel dBi antenna gain referenced to isotropic radiator dBm decibel referenced to 1 mW dBZ reflectivity DMF Data Management Facility DOE U.S. Department of Energy DQO Data Quality Office (ARM) GHz gigahertz (10 9 Hz) Hz hertz Ka band frequencies between 26.5 GHz and 40 GHz

42

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

13 13 Scanning ARM Cloud Radar (X/Ka/W-SACR) K Widener N Bharadwaj K Johnson June 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research K Widener/N Bharadwaj/K Johnson, June 2012, DOE/SC-ARM/TR-113 iii Acronyms and Abbreviations AGL above ground level ARM Atmospheric Radiation Measurement (Climate Research Facility) C band frequencies between 4 GHz and 8 GHz dB decibel dBi antenna gain referenced to isotropic radiator dBm decibel referenced to 1 mW dBZ reflectivity DMF Data Management Facility DQO Data Quality Office (ARM) EIKA Extended Interaction Klystron Amplifier GHz gigahertz (10 9 Hz) Hz hertz Ka band frequencies between 26.5 GHz and 40 GHz

43

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

ARM TR-030 ARM TR-030 Temperature, Humidity, Wind, and Pressure System (THWAPS) Handbook January 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research January 2011, ARM TR-030 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1

44

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE/SC-ARM-TR-020 DOE/SC-ARM-TR-020 Vaisala Ceilometer (VCEIL) Handbook VR Morris March 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research VR Morris, March 2012, DOE/SC-ARM-TR-020 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1 3.0 Deployment Locations and History ...................................................................................................... 1

45

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

S S E P I I 1965 9 . '* BROKEN SU(3) x SU(3) x SU(3) x SU(3) SYMMETRY P . G . O . Freund and Y . Nambu The E n r i c o Fermi I n s t i t u t e f o r N u c l e a r S t u d i e s and t h e Department o f P h y s i c s The U n i v e r s i t y o f Chicago, Chicago, I l l i n o i s coo-264-219 Annals of P h y s i c s October, 1964 C o n t r a c t N o . A T ( l l - 1 ) - 2 6 4 W EFINS-64-53 1. The E n r i c o Fermi I n s t i t u t e f o r N u c l e a r S t u d i e s and t h e Department of P h y s i c s The U n i v e r s i t y of Chicago, Chicago, I l l i n o i s I . I N T R O D U C T I O N T h e r e a r e a l r e a d y s e v e r a l p i e c e s of d e c i s i v e e v i d e n c e s u p p o r t i n g t h e " e i g h t - f o l d way" v e r s i o n of SU( 3) symmetry, proposed b y Gell-Mann and Ne'eman,' t o be t h e dominant f e a t u r e o f t h e s t r o n g i n t e r a c t i o n s . as The symmetry i s r e c o g n i z e d by t h e f a c t t h a t p a r t i c l e s and r e s o n a n c e s c a n be grouped i n t o m u l t

46

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

This rcport was prepared as an account of work sponsored by an agency of the This rcport was prepared as an account of work sponsored by an agency of the United States Government, Neither the United States Government nor any agency thereof, nor any of their tmploytts, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or use- fulness of any information, apparatus, product, or proass disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any spe- cific commercial product, process, or t m i c e by trade name, trademark, manufac- turer, or otherwise does not necessarily constitute or imply its endorsement, r m m - mendation. or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or

47

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

Portions of this document may be illegible in Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. DOE/FE/60177-2452 (DE88006578) Distribution Category UC-123 AN NMR INVESTIGATION OF THE CHEMICAL ASSOCIATION AND MOLECULAR DYNAMICS I N ASPHALT RIDGE TAR SAND ORE AND BITUMEN by Daniel A. Netzel Peggy T . Coover Septenher 1987 Work Performed Under Cooperative Agreement DE-FCZ 1-83FE6017 7 For U.S. Department o f Energy Office o f Fossil Energy Laramie Project Office Laramie, Wyoming BY Western Research I n s t i t u t e Larami e, Wyomi ng .. . . . . . . . . . . TABLE O F CONTENTS Page LIST OF TABLES .................................................... iii LIST OF FIGURES ................................................... iii SUMMARY

48

DISCLAIMER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

a a 0 Q c P 8 E c This report was prepared as an account of work sponsored by an agency of the United States Government. Neitherthe United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recorn- mendation, or favoring by the United States Government or any agency thereof. The views

49

DISCLAIMER  

Office of Legacy Management (LM)

VALLEY, ARIZONA VALLEY, ARIZONA Sampled December 2003 DATA PACKAGE CONTENTS This data package includes the following information: Item No. Description of Contents 1. Site Lead Summary. 2. Data Package Assessment, which includes the following: a. Field activities verification checklist. b. Confirmation that chain-of-custody was maintained. c. Confirmation that holding time requirements were met. d. Evaluation of the adequacy of the QC sample results. Data Assessment Summary, which describes problems identified in the data validation process and summarizes the validator's findings. Minimum I Maximum Table, is generated by the database system. This table compares the new data set with historical minimums and maximums and lists the data on the table if they exceed the historical minimums and maximums. The data

50

DISCLAIMER  

Office of Legacy Management (LM)

PREFACE PREFACE T h i s r e p o r t combines a l l flow and p r e s s u r e b u i l d - u p d a t a c o l l e c t e d on t h e two w e l l s a s s o c i a t e d w i t h P r o j e c t R u l i s o n . A l l s u r f a c e p r e s s u r e s shown t h r o u g h o u t t h i s r e p o r t were measured e i t h e r with a dead weight t e s t e r o r w i t h c o n v e n t i o n a l p r e s s u r e gauges. Bottom h o l e p r e s s u r e s were measured u s i n g an Amerada Type RPG-3 bottom h o l e p r e s s u r e gauge. Flow r a t e s were measured by u s i n g e i t h e r a c o n v e n t i o n a l o r i f i c e f l o w meter o r a c r i t i c a l flow p r o v e r . PROJECT RULISON - WELL TEST DATA TABLE OF CONTENTS Page No. SECTION I - HAYWARD "A" #25-95 (R-E) Pressure Build-up NO. 1 Pressure Drawdown No. 1 Pressure Build-up No. 2 SECTION I 1 - HAYWARD #25-95 (R-EX) Calibration Flow Period Flow Test No. 1 Pressure Build-up NO. 1 Flow Test No. 2 Pressure Build-up NO. 2

51

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

ARM/TR-092 ARM/TR-092 Surface Energy Balance System (SEBS) Handbook DR Cook February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research DR Cook, February 2011, DOE/SC-ARM/TR-092 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1

52

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

59 59 Multifilter Rotating Shadowband Radiometer (MFRSR) Handbook With subsections for the following derivative instruments: Multifilter Radiometer (MFR) Normal Incidence Multifilter Radiometer (NIMFR) GB Hodges JJ Michalsky January 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research GB Hodges and JJ Michalsky, January 2011, DOE/SC-ARM/TR-059 iii Acronyms and Abbreviations AMF ARM Mobile Facility ARM Atmospheric Radiation Measurement EMF electromagnetic field ESRL Earth System Research Laboratory FOV field-of-view GMD Global Monitoring Division IMMS Instrument Mentor Monthly Summary MFR multifilter radiometer MFRSR multifilter rotating shadowband radiometer

53

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINANCIAL ASSISTANCE FUNDING OPPORTUNITY ANNOUNCEMENT U.S. Department of Energy Golden Field Office Recovery Act: Large Wind Turbine Drivetrain Testing Facility Funding Opportunity Announcement Number: DE-FOA-0000112 Announcement Type: Amendment 000002 CFDA Number: 81.087 Issue Date: 06/23/2009 Letter of Intent Due Date: 07/22/2009, 11:59 PM Eastern Time Note: Only those Applicants who submitted a letter of intent are eligible to submit final applications under this announcement. Application Due Date: 08/13/2009, 11:59 PM Eastern Time NOTE: Questions regarding the content of this announcement must be submitted through FedConnect. Applicants must be registered in FedConnect to submit or view Questions. 2

54

DISCLAIMER  

Office of Scientific and Technical Information (OSTI)

This report was prepared as an account of work sponsored by an agency of the United States This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would no! infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or senice by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- mendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the

55

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

Finite element method simulation of the atomic force microscopy (AFM) Finite element method simulation of the atomic force microscopy (AFM) tip induced optical-field enhancement near a metallic nano-particle, a new approach for AFM-surface enhanced Raman microscopy (AFM-SERS). The illustration shows the distri- bution of an enhanced electric field in the vicinity of a nano-particle (dia.10nm) when approached from above by a silver AFM and exposed under the laser illumination with vertical polarization. By using a frequency-domain 3D finite element method to solve Maxwell's equations, CS&D researcher Miodrag Micic, Nicholas Klymyshyn, and H. Peter Lu simulated the electric field enhancement distribution as a function of the geometrical and optical parameters. Ongoing research suggests possible new approaches for enhanc-

56

Disclaimer  

NLE Websites -- All DOE Office Websites (Extended Search)

5975 5975 Final Research Performance Progress Report (Period ending 04/01/2013) Measuring Fracture Density and Orientation in Unconventional Reservoirs Using Simple-Source Vertical Seismic Profiles Project Period (February 2011 to April 2013) Submitted by: Bob A. Hardage _________________________ Signature Bureau of Economic Geology DUNS #:170230239 10100 Burnet Road Austin, Texas 78758 e-mail: Bob.hardage@beg.utexas.edu Phone number: (512) 471-0300 Prepared for: United States Department of Energy National Energy Technology Laboratory Submission date: March, 2013 Office of Fossil Energy Bob Hardage Digitally signed by Bob Hardage DN: cn=Bob Hardage, o=Bureau of Economic Geology, ou, email=bob.hardage@beg.utexas.edu, c=US Date: 2013.05.31 11:23:10 -05'00'

57

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

050 050 Towers Handbook DR Cook February 2010 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research February 2010, DOE/SC-ARM/TR-050 iii Acronyms and Abbreviations ARM Atmospheric Radiation Measurement Climate Research Facility CF Central Facility CO 2 FLX Carbon Dioxide Flux Measurement System DQ Data Quality ECOR Eddy Correlation System GPS global positioning system MFR Multi-Filter Radiometer NSA North Slope of Alaska PGS precision gas system PRTD Platinum Resistance Temperature Detector RMS root mean square SGP Southern Great Plains SIRS Solar and Infrared Station SMOS Surface Meteorological Observation Station Also, see the ARM Acronyms and Abbreviations.

58

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

NXO-3071 NXO-3071 ON ANGULAR MOAfENTUM ' 1 . I n t r o d u c t i o n One of t h e methods of t r e a t i n g a general angular mo- mentum i n quantum mechanics is t o regard i t - a s the euper- popition of a number of elementary "epins", o r angular molrenta w i t h 3 = 1/2. a Rose-Einateln system, can h e u s e f u l l y discussed by t h e method o f second quantization. cedure u n i t e s t h e compact symbolism o f t h e group t h e o r e t i c a l approach with t h e e x p l i c i t operator techniques of quantum Such a spin assembly, considered as W e shall see that t h i s pro- I mechanics e W e introduce s p i n c r e a t i o n and a n n i h i l a t i o n operator8 a s s o c i a t e d w i t h a given s p a t i a l r e f e r e n c e system, a+ = (a+,a_) and a = (a+,a-),. which a a t i - s f y + + x t , The number of s p i n s and t h e r e s u l t a n t angular momentum m e t h

59

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

91 91 G-Band Vapor Radiometer Profiler (GVRP) Handbook MP Cadeddu Argonne National Laboratory June 2010 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research MP Cadeddu, June 2010, DOE/SC-ARM/TR-091 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1

60

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINANCIAL ASSISTANCE FUNDING OPPORTUNITY ANNOUNCEMENT U.S. Department of Energy Golden Field Office "Recovery Act: Community Renewable Energy Deployment" Funding Opportunity Announcement Number: DE-FOA-0000122 Announcement Type: Initial CFDA Number: 81.087 Issue Date: July 15, 2009 Application Due Date: September 3, 2009, 11:59 PM Eastern Time NOTE: Questions regarding the content of this announcement must be submitted through FedConnect. Applicants must be registered in FedConnect to submit or view Questions. 1 2 APPLICATION SUBMISSION, FEDCONNECT QUICK START GUIDE, REGISTRATION REQUIREMENTS, AND SUBMISSION OF QUESTIONS 1. Application Submission APPLICATIONS MUST BE SUBMITTED THROUGH FEDCONNECT AT https://www.fedconnect.net/ TO BE CONSIDERED FOR AWARD. The Adobe Application

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

ARM-TR-044 ARM-TR-044 Radar Wind Profiler and RASS (RWP915) Handbook R Coulter February 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research R Coulter, February 2012, DOE/SC-ARM-TR-044 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts ................................................................................................................................................ 1 2.1 Mentor .......................................................................................................................................... 1

62

DISCLAIMER  

Office of Legacy Management (LM)

VALLEY VALLEY Sampled January 1997 DATA PACKAGE CONTENTS This data package includes the following information: Item No. Description of Contents 1. Site Sampling h a d Summary a. Table of UMTRA standards exceedences in ground water. 2. Data Package Assessment, which includes the following: a. Field procedures verification checklist b. Confirmation that chain-of-custodv was maintained. c. Confirmation that holding time requirements were met. d. Evaluation of the adequacy of the QC sample results. Data Assessment Summary, which describes problems identified in the data validation process and summarizes the validators findings. Anomalous Data Review Checksheets which list the subset of data from the sampling event that merits explanation or follow-up action. The

63

DISCLAIMER  

Office of Legacy Management (LM)

DOEIEA-1313 DOEIEA-1313 Rev. 0 Environmental Assessment of Ground Water Compliance at the Monument Valley Uranium Mill Tailings Site Draft September 1999 Prepared by U.S. Department of Energy Grand Junction Office Grand Junction, Colorado Work Performed Under DOE Contract No. DE-AC13-96GJ87335 for the U.S. Department of Energy Document Number UW69700 This Page Intentionally Blank Contents Page . . ................................... ................................................................ Acronyms and Abbreviations .... vn ....................................................................................................................... Executive Summary ix ............................................................................................................................. 1.0 Introduction 1

64

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

SGP-TR-- 11 0 SGP-TR-- 11 0 This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability cr responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily .constitute or imply its endorsement, recom- mendation, or favoring by the United States Government or any agency thereof. The views

65

DISCLAIMER  

Office of Scientific and Technical Information (OSTI)

Properties of Mixed Conducting (M Sr,Ca,Ba) bxovskites J.W. Stevenson, T.R. Armstrong, L.R. Pederson, and WJ. Weber Materials Sciences Department, Pacific Northwest...

66

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

off by unplugging the connector in the center of the electronics board labeled -781 nm lockout. c. The 405 nm laser is turned off by unplugging the main power from the connector...

67

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

level AMF ARM Mobile Facility AMFDL AMF Doppler Lidar ARM Atmospheric Radiation Measurement DL Doppler Lidar DMF Data Management Facility DOE U.S. Department of Energy DQO...

68

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement,...

69

Disclaimer  

National Nuclear Security Administration (NNSA)

these fees. In addition to permit fees, NNSANSO must allow the state of Nevada Bureau of Air Pollution Control to conduct inspections of NTS facilities and operations that are...

70

DISCLAIMER:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Recovery Act: Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Funding Opportunity Number: DE-FOA-0000044 Announcement Type: Amendment 000005 CFDA Number: 81.087 Issue Date: 07/07/2009 Letter of Intent Due Date: Not Applicable Pre-Application Due Date: Not Applicable Application Due Date: 07/14/2009, 8:00 PM Eastern Time THIS AMENDMENT SUPERSEDES THE ORIGINAL ANNOUNCEMENT AND ANY PREVIOUSLY ISSUED AMENDMENTS. THIS DOCUMENT REPRESENTS THE ANNOUNCEMENT IN FULL. It is not necessary to access the Body or any other previous versions for information. 1 The purpose of this Amendment No. 000005 to DE-FOA-0000044 is to: Add a requirement for submission of an additional appendix (Project Economics) to the Project

71

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

ARM-TR-014 ARM-TR-014 Aerosol Observing System (AOS) Handbook A. Jefferson January 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research A. Jefferson, January 2011, ARM-TR-014 iii Contents 1.0 General Overview of AOS ................................................................................................................... 1 2.0 Timeline and Deployment History ....................................................................................................... 1 3.0 Data Description ................................................................................................................................... 2 3.1 File Variables and Format ............................................................................................................ 2

72

DISCLAIMER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 This report was prepared as an a w u n t of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- g mendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the

73

DISCLAIMER  

Office of Scientific and Technical Information (OSTI)

area. Liberty and Montgomery Counties. showing approximate locations o f dip section and oil and gas production ... 12 . Structural cross section of the Fostoria...

74

RESEARCH & DEVELOPMENT: PROGRAM ABSTRACTS  

E-Print Network (OSTI)

Cells for Transportation program will not develop fuel cell cars, but will facilitate the critical-flexible fuel strategy. Other accomplishments under the DOE program include Ford/IFC's 50-kW hydrogen fuel cell Backing Layers INTEGRATED SYSTEMS Polymer Electrolyte Membrane Fuel Cells Fuel Cell Stack PEM STACK

75

SES CANDIDATE DEVELOPMENT PROGRAM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 (11-03) SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Developmental Assignment Opportunity DATE: NAME OF SES CANDIDATE: TITLE: ASSIGNMENT NUMBER: ASSIGNMENT BEGINS: ENDS: TELEPHONE NUMBER: FAX NUMBER: EMAIL ADDRESS: ASSIGNMENT LOCATION HOST ORGANIZATION: PURPOSE OF ASSIGNMENT: ASSIGNMENT POSITION: ASSIGNMENT DUTIES: EXECUTIVE COR QUALIFICATIONS TO BE ADDRESSED: OFFICE ADDRESS: TELEPHONE NUMBER: FAX NUMBER: E-MAIL ADDRESS: 1 U.S. DEPARTMENT OF ENERGY SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP)

76

Sun Academic Developer Program  

E-Print Network (OSTI)

Sun Academic Developer Program Kim Jones Vice President Government, Education & Health Care Sun Microsystems, Inc. FY08 Campus Ambassador Programme Your Name Here Sun Microsystems, Inc. #12;2 FY08 Campus Ambassador Programme #12;3 Sun Academic Developer Initiative On-Campus Events and Contests Open Source

McCusker, Guy

77

SES CANDIDATE DEVELOPMENT PROGRAM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 (11-03) SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Candidate Developmental Assignment Evaluation DATE:_______________ NAME OF SES CANDIDATE TITLE OF POSITION LOCATION ASSIGNMENT DURATION: Which Executive Core Qualification(s) was this assignment intended to meet? Leading Change Leading People Results Driven Business Acumen Building Coalitions/Communication Please provide a brief description of your assignment. Did the experience meet your expectation? Was this a good learning experience? 1 U.S. DEPARTMENT OF ENERGY DOE F 360.5 (11-03) SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Candidate Developmental Assignment Evaluation

78

DOE Leadership & Career Development Programs | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Development DOE Leadership & Career Development Programs DOE Leadership & Career Development Programs Senior Executive Service Candidate Development Program (SESCDP): This...

79

Acquisition Career Development Program  

Directives, Delegations, and Requirements

To set forth requirements and responsibilities for the Department of Energy (DOE) Acquisition Career Development (ACD) Program, which implements Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the career development objectives of Executive Order (E.O.) 12931. Change 1 approved 12-20-2001. Cancels DOE O 361.1. Canceled by DOE O 361.1 Chg 2.

2001-12-20T23:59:59.000Z

80

Acquisition Career Development Program  

Directives, Delegations, and Requirements

To set forth requirements and responsibilities for the Department of Energy (DOE) Acquisition Career Development (ACD) Program, which implements Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the career development objectives of Executive Order (E.O.) 12931. Change 1 approved 12-20-2001. Change 2 approved 06-13-03. Cancels DOE O 361.1 Chg 1. Canceled by DOE O 361.1A.

2003-06-13T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

SES CANDIDATE DEVELOPMENT PROGRAM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 (11-03) SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Evaluation of Formal Training DATE:_______________ CANDIDATE NAME: TITLE OF TRAINING PROGRAM: VENDOR/LOCATION: TRAINING DATES: Which Executive Core Qualification(s) was this assignment intended to meet? Leading Change Leading People Results Driven Business Acumen Building Coalitions/Communication Please check one for each of the following: Level of difficulty: Too Advanced ___ Appropriate ___ Too Elementary ___ Length of course: Too Long ___ Appropriate ___ Too Short ___ Instructor(s): Excellent ___ Satisfactory ___ Fair Poor ___ 1 until U.S. DEPARTMENT OF ENERGY

82

Acquisition Career Development Program  

Directives, Delegations, and Requirements

The Order implements the Department's Acquisition Career Development program, mandatory for professionals in the GS-1102 and 1105 occupational procurement series, as well as others with significant procurement responsibilities. The Order also ensures that members of the acquisition workforce are aware of and adhere to the mandatory training and certification requirements. Cancels Acquisition Letter 98-06. Canceled by DOE O 361.1 Chg 1.

1999-11-10T23:59:59.000Z

83

Illinois Coal Development Program (Illinois)  

Energy.gov (U.S. Department of Energy (DOE))

The Illinois Coal Development Program seeks to advance promising clean coal technologies beyond research and towards commercialization. The program provides a 50/50 match with private industry...

84

SES CANDIDATE DEVELOPMENT PROGRAM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 (11-03) SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Supervisor's Evaluation of Candidate's Performance During Developmental Assignment DATE:________________ NAME OF SES CANDIDATE: TITLE OF POSITION: LOCATION OF ASSIGNMENT: ASSIGNMENT DURATION: PART I: EVALUATION OF ASSIGNMENT OBJECTIVES Please evaluate the candidate's level of performance in meeting the objectives of the assignment as Successful or Unacceptable. Objectives Standards Performance Evaluation PLEASE RATE YOUR OVERALL EVALUATION OF THE CANDIDATE'S PERFORMANCE BY CIRCLING A NUMBER ON THE SCALE BELOW: EXCELLENT VERY GOOD SATISFACTORY POOR UNACCEPTABLE

85

Sandia National Laboratories: PV Program Disclaimer  

NLE Websites -- All DOE Office Websites (Extended Search)

Engine Test Facility Central Receiver Test Facility Power Towers for Utilities Solar Furnace Dish Test Facility Optics Lab Parabolic Dishes Work For Others (WFO) User...

86

Large Business Development Program (Illinois)  

Energy.gov (U.S. Department of Energy (DOE))

The Large Business Development Program, administered by the Illinois Department of Commerce and Economic Opportunity, provides grants to large businesses for bondable business activities, including...

87

DISCLAIMER United States Government. Neither  

NLE Websites -- All DOE Office Websites (Extended Search)

779 779 Six-Degree-of-Freedom Sensor Fish Design: Governing Equations and Motion Modeling Z. Deng M. C. Richmond C. S. Simmons T. J. Carlson July 2004 Prepared for the U.S. Department of Energy under Contract DE-AC06-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 Executive Summary The Sensor Fish device is being used at Northwest hydropower projects to better understand the conditions fish experience during passage through hydroturbines and other dam bypass alter- natives. Since its initial development in 1997, the Sensor Fish has undergone numerous design changes to improve its function and extend the range of its use. The most recent Sensor Fish de- sign, the three degree of freedom (3DOF) device, has been used successfully to characterize the environment fish experience when passing through turbines, in spill, or in engineered fish bypass facilities

88

Rural Development Advantage Program (Nebraska)  

Energy.gov (U.S. Department of Energy (DOE))

The Rural Development Advantage Program provides qualified businesses with refundable tax incentives for projects that create two new jobs and invest $125,000 in counties with less than 15,000...

89

Automotive Stirling Engine Development Program  

SciTech Connect

The Task I accomplishments of the jointly funded Ford/DOE Automotive Stirling Engine Development Program are detailed. This task was directed at achieving 20.6 MPG (gasoline) fuel economy for a 4500 lb inertia weight Stirling engine-powered passenger car. The results of engine testing and design, power control, fuel economy projections, and component design and development are discussed.

Kitzner, E.W.

1980-03-01T23:59:59.000Z

90

Business Development Executive (BDE) Program  

SciTech Connect

The IPST BDE (Institute of Paper Science and Technology Business Development Executive) program was initiated in 1997 to make the paper industry better aware of the new manufacturing technologies being developed at IPST for the U.S. pulp and paper industry's use. In April 2000, the BDE program management and the 20 BDEs, all retired senior level industry manufacturing and research executives, were asked by Ms. Denise Swink of OIT at DOE to take the added responsibility of bringing DOE developed energy conservation technology to the paper industry. This project was funded by a DOE grant of $950,000.

Rice, E.J. "Woody"; Frederick, W. James

2005-12-05T23:59:59.000Z

91

Director's Discretionary Research and Development Program, Annual...  

Office of Environmental Management (EM)

Director's Discretionary Research and Development Program, Annual Report FY 2007 Director's Discretionary Research and Development Program, Annual Report FY 2007 Draft...

92

Accelerated leach test development program  

SciTech Connect

In FY 1989, a draft accelerated leach test for solidified waste was written. Combined test conditions that accelerate leaching were validated through experimental and modeling efforts. A computer program was developed that calculates test results and models leaching mechanisms. This program allows the user to determine if diffusion controls leaching and, if this is the case, to make projections of releases. Leaching mechanisms other than diffusion (diffusion plus source term partitioning and solubility limited leaching) are included in the program is indicators of other processes that may control leaching. Leach test data are presented and modeling results are discussed for laboratory scale waste forms composed of portland cement containing sodium sulfate salt, portland cement containing incinerator ash, and vinyl ester-styrene containing sodium sulfate. 16 refs., 38 figs., 5 tabs.

Fuhrmann, M.; Pietrzak, R.F.; Heiser, J.; Franz, E.M.; Colombo, P.

1990-11-01T23:59:59.000Z

93

OpenEI:General disclaimer | Open Energy Information  

Open Energy Info (EERE)

disclaimer disclaimer Jump to: navigation, search Disclaimer Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government ("Government"), the National Renewable Energy Laboratory ("NREL") or the Alliance for Sustainable Energy, LLC ("ALLIANCE"). The views and opinions expressed in available or referenced any data, text, drawings, calculations and/or graphical and other images (hereinafter "Information") do not necessarily state or reflect those of the Government/NREL/ALLIANCE. THE INFORMATION MADE AVAILABLE FROM THIS DATABASE IS "AS IS," AND NEITHER THE GOVERNMENT,

94

Economic Development Incentive Program (Massachusetts) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Economic Development Incentive Program (Massachusetts) Economic Development Incentive Program (Massachusetts) Economic Development Incentive Program (Massachusetts) < Back Eligibility Agricultural Commercial Construction Fuel Distributor Industrial Installer/Contractor Institutional Investor-Owned Utility Municipal/Public Utility Nonprofit Retail Supplier Systems Integrator Transportation Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Massachusetts Program Type Corporate Tax Incentive Provider Office of Business Development The Economic Development Incentive Program (EDIP) is a tax incentive program designed to foster job creation and stimulate business growth throughout the Commonwealth. Participating companies may receive state and

95

Advanced Emissions Control Development Program  

SciTech Connect

Babcock & Wilcox (B&W) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using B&W?s new Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species hydrogen chloride and hydrogen fluoride.

A. P. Evans

1998-12-03T23:59:59.000Z

96

Advanced Emission Control Development Program.  

SciTech Connect

Babcock & Wilcox (B&W) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using B&W`s new Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species hydrogen chloride and hydrogen fluoride.

Evans, A.P.

1997-12-31T23:59:59.000Z

97

Sustainable Development Fund Financing Program (PECO Territory) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sustainable Development Fund Financing Program (PECO Territory) Sustainable Development Fund Financing Program (PECO Territory) Sustainable Development Fund Financing Program (PECO Territory) < Back Eligibility Commercial Industrial Nonprofit Schools Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Bioenergy Manufacturing Buying & Making Electricity Alternative Fuel Vehicles Hydrogen & Fuel Cells Water Solar Water Heating Wind Program Info State Pennsylvania Program Type Local Loan Program Rebate Amount Varies by project Provider TRF Sustainable Development Fund The Pennsylvania Public Utility Commission created the Sustainable Development Fund (SDF) in its final order of the PECO Energy electric

98

Sodium Heat Engine Development Program  

SciTech Connect

The Sodium Heat Engine (SHE) is an efficient thermoelectric conversion device which directly generates electricity from a thermally regenerative electrochemical cell that relies on the unique conduction properties of {beta}{double prime}-alumina solid electrolyte (BASE). Laboratory models of a variety of SHE devices have demonstrated the feasibility and efficiency of the system, engineering development of large prototype devices has been slowed by a series of materials and fabrication problems. Failure of the electrolyte tubes has been a recurring problem and a number of possible causes have been postulated. To address these issues, a two-phase engineering development program was undertaken. This report summarizes the final results of the first phase of the program, which included extensive materials characterization activities, a study of applicable nondestructive evaluation methods, an investigation of possible stress states that would contribute to fracture, and certain operational issues associated with the electromagnetic pumps used in the SHE prototype. Mechanical and microstructural evaluation of commercially obtained BASE tubes revealed that they should be adequate for SHE applications and that sodium exposure produced no appreciable deleterious strength effects. Processing activities to produce a more uniform and smaller grain size for the BASE tubes were completed using isostatic pressing, extrusion, and slip casting. Green tubes were sintered by conventional and microwave plasma methods. Of particular interest is the residual stress state in the BASE tubes, and both analysis and nondestructive evaluation methods were employed to evaluate these stresses. X-ray and neutron diffraction experiments were performed to determine the bulk residual stresses in commercially fabricated BASE tubes; however, tube-to-tube variations and variations among the various methods employed did not allow formulation of a definitive definition of the as-fabricated stress state.

Singh, J.P.; Kupperman, D.S.; Majumdar, S.; Dorris, S.; Gopalsami, N.; Dieckman, S.L.; Jaross, R.A.; Johnson, D.L.; Gregar, J.S.; Poeppel, R.B.; Raptis, A.C.; Valentin, R.A.

1992-01-01T23:59:59.000Z

99

EMSL: Science: Research and Capability Development Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Intramural Research & Capability Development Program Intramural Research & Capability Development Program The EMSL Intramural Research and Capability Development Program facilitates development of new research tools and enables EMSL staff members to advance the important skills and expertise necessary to enhance the EMSL user program. These intramural projects are intended to increase the scientific visibility of EMSL staff in areas that promote the objectives of EMSL's three science themes- Biological Interactions and Dynamics, Geochemistry/Biogeochemistry and Subsurface Science, and Science of Interfacial Phenomena. Technical outcomes of this program include journal publications, scientific presentations, new capabilities or capability enhancements, and expertise to augment EMSL user activities and foster development of innovative

100

Radionuclide absorbers development program overview.  

SciTech Connect

The proposed Yucca Mountain repository is anticipated to be the first facility for long-term disposal of commercial spent nuclear fuel and high-level radioactive waste in the United States. The facility, located in the southern Nevada desert, is currently in the planning stages with initial exploratory excavations completed. It is an underground facility mined into the tuffaceous volcanic rocks that sit above the local water table. The focus of the work described in this paper is the development of radionuclide absorbers or 'getter' materials for neptunium (Np), iodine (I), and technetium (Tc) for potential deployment in the repository. 'Getter' materials retard the migration of radionuclides through sorption, reduction, or other chemical and physical processes, thereby slowing or preventing the release and transport of radionuclides. An overview of the objectives and approaches utilized in this work with respect to materials selection and modeling of ion 'getters' is presented. The benefits of the 'getter' development program to the United States Department of Energy (US DOE) are outlined.

Jow, Hong-Nian

2005-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Automotive Stirling Engine Development Program: A success  

SciTech Connect

The original 5 y Automotive Stirling Engine Development Program has been stretched to a 10 y program due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

Tabata, W.K.

1987-01-01T23:59:59.000Z

102

Southeast Propane AutoGas Development Program | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Southeast Propane AutoGas Development Program Southeast Propane AutoGas Development Program 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit...

103

Software Distribution Statement and Disclaimer | Scientific and Technical  

Office of Scientific and Technical Information (OSTI)

Distribution Statement and Disclaimer Distribution Statement and Disclaimer Print page Print page Email page Email page Rights-in-technical-data clauses for many DOE contracts require a statement acknowledging DOE sponsorship/data rights for information products. The following distribution statement and disclaimer meet those requirements for software and should be affixed to all distributed DOE-sponsored software. Contractors may have specific requirements and required notices in their contracts. Legal counsel should review any appropriate additional markings that are desired; such markings should be consistent with restrictions indicated on the announcement form (DOE AN 241.4). Markings should be affixed to all software package elements provided to ESTSC or a SIAC. Respective SIACs, or originating sites issue

104

Community-Driven Development Decision Tools for Rural Development Programs  

Open Energy Info (EERE)

Community-Driven Development Decision Tools for Rural Development Programs Community-Driven Development Decision Tools for Rural Development Programs Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Community-driven Development Decision Tools for Rural Development Programs Agency/Company /Organization: International Fund for Agricultural Development Topics: Policies/deployment programs Resource Type: Guide/manual, Training materials Website: www.ifad.org/english/cdd/pub/decisiontools.pdf Community-driven Development Decision Tools for Rural Development Programs Screenshot References: Community-Driven Development Decision Tools[1] Overview "The CDD Decision Tools is the final outcome of a series of studies conducted from 2003-08 by IFAD on the CDD activities and approaches it sponsors in a number of countries in Western and Central Africa (WCA). The

105

Low Emissions Asian Development (LEAD) Program - Bangladesh ...  

Open Energy Info (EERE)

Redirect page Jump to: navigation, search REDIRECT Low Emissions Asian Development (LEAD) Program Retrieved from "http:en.openei.orgwindex.php?titleLowEmissionsAsianDevel...

106

Loan Loss Reserve Fund Program Development  

Energy.gov (U.S. Department of Energy (DOE))

Typically, grantees will work with interested parties or partners to develop a clean energy loan and a loan loss reserve fund program that involves the following steps:

107

MFRC Training Development & Delivery Program - Bloodstain & Toxicology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Center (MFRC) Training Development and Delivery Program increases access to forensic science training for publicly funded state and local forensic scientists. Its goals...

108

Graduate and Professional Development Programs  

E-Print Network (OSTI)

Programs The John H. Evans Library, Melbourne campus, houses 106,000 books, 202,000 government documents) .............................. 25A Operations Research (ORP) ................. 26A Space Systems (SPC) ............................ 27A Space Sciences (SPS) ............................ 29A Software Engineering (SWE

Wood, Stephen L.

109

Development | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Printable Version Development Commercial Residential Adoption Compliance Regulations Resource Center Development The U.S. Department of Energy (DOE) supports and participates in the model building energy code development processes administered by the ASHRAE and the International Code Council (ICC). DOE activities include developing and submitting code change proposals, conducting analysis of building energy efficiency and cost savings, and formulating underlying evaluation methodologies. Through participation in model energy code development for both commercial and residential buildings, DOE strives to make cost-effective, energy efficient upgrades to current model codes. DOE also establishes energy efficiency standards for federal buildings and manufactured housing. Further information on this process is defined under

110

Nuclear Safety Research and Development Program Operating Plan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Operating Plan Nuclear Safety Research and Development Program Operating Plan July 5, 2012 Nuclear Safety Research and Development Program Operating Plan This operating...

111

Leadership Development Program Catalog | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leadership Development Program Catalog Leadership Development Program Catalog Leadership Development Program Catalog A well-trained workforce is vital to the long-term effectiveness of the Federal Government. As such, all Federal employees, particularly those who serve or hope to serve in senior management positions, are encouraged to take advantage of opportunities to enhance their professional skills and develop the competencies needed for success as leaders. The Leadership Development Program Catalog by ECQ is a comprehensive list of training opportunities intended to assist all Federal leaders grow in the five Executive Core Qualifications (ECQs) and Fundamental Competencies. The resources listed will facilitate your growth and development as both a Federal employee and as a person, and will be helpful to all levels of

112

Geothermal Research and Development Programs  

Energy.gov (U.S. Department of Energy (DOE))

Here you'll find links to laboratories, universities, and colleges conducting research and development (R&D) in geothermal energy technologies.

113

Darden Executive Education Management Development Program  

E-Print Network (OSTI)

, or will soon undergo, the transition from a functional to a general management role. They may alsoDarden Executive Education Management Development Program: Driving Vision, Action, and Results ... Change the Way You Think! #12;The Program Organizations globally need to prepare middle management

Acton, Scott

114

Business Development Loan Program (North Dakota)  

Energy.gov (U.S. Department of Energy (DOE))

The Business Development Loan Program assists new and existing businesses in obtaining loans that would have a higher degree of risk than would normally be acceptable to a lending institution. ...

115

Manpower development for new nuclear energy programs  

E-Print Network (OSTI)

In the spring of 2012, nine countries were seriously considering embarking on nuclear energy programs, either having signed contracts with reactor vendors or having made investments for the development of infrastructure ...

Verma, Aditi

2012-01-01T23:59:59.000Z

116

Pine Tree Development Zones Program (Maine)  

Energy.gov (U.S. Department of Energy (DOE))

The Pine Tree Development Zones program offers eligible businesses the chance to reduce, and sometimes eliminate, state taxes for up to ten years. There is a statutory requirement of hiring a...

117

Nuclear Safety Research and Development (NSR&D) Program | Department...  

Office of Environmental Management (EM)

Safety Research and Development (NSR&D) Program Nuclear Safety Research and Development (NSR&D) Program The Nuclear Safety Research and Development (NSR&D) Program is managed by...

118

Fuel Cycle Research and Development Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development Program Presentation to Office of Environmental Management Tank Waste Corporate Board James C. Bresee, ScD, JD Advisory Board Member Office of Nuclear Energy July 29, 2009 July 29, 2009 Fuel Cycle Research and Development DM 195665 2 Outline Fuel Cycle R&D Mission Changes from the Former Advanced Fuel Cycle Initiative The Science-Based Approach Key Collaborators Budget History Program Elements Summary July 29, 2009 Fuel Cycle Research and Development DM 195665 3 Fuel Cycle R&D Mission The mission of Fuel Cycle Research and Development is to develop options to current fuel cycle management strategy to enable the safe, secure, economic, and sustainable expansion of nuclear energy while reducing proliferation risks by conducting

119

START Program for Renewable Energy Project Development Assistance...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program for Renewable Energy Project Development Assistance START Program for Renewable Energy Project Development Assistance The Strategic Technical Assistance Response Team...

120

Southeast Propane AutoGas Development Program | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

D.C. tiarravt065christopher2010p.pdf More Documents & Publications Southeast Propane AutoGas Development Program Southeast Propane AutoGas Development Program Technology...

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Southeast Propane AutoGas Development Program | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Evaluation arravt065tijenkins2011p.pdf More Documents & Publications Southeast Propane AutoGas Development Program Southeast Propane AutoGas Development Program State of...

122

Recent developments of the US RERTR program  

SciTech Connect

The status of the US Reduced Enrichment Research and Test Reactor (RERTR) Program is reviewed. After a brief outline of the RERTR Program objectives, goals and past accomplishments, emphasis is placed on the developments which took place during 1983 and on current program plans and schedules. Most program activities have proceeded as planned and a combination of two silicide fuels (U/sub 3/Si/sub 2/-Al and U/sub 3/Si-Al) was found to hold excellent promise for achieving the long-term program goals. A modification of the program plan, including the development and demonstration of those fuels, was prepared and is now being implemented. The uranium density of qualified RERTR fuels for plate-type reactors is forecasted to grow by approximately 1 g U/cm/sup 3/ each year, from the current 1.7 g U/cm/sup 3/ to the 7.0 g U/cm/sup 3/ which will be reached in 1988. The technical needs of research reactors for HEU exports are also forecasted to undergo a gradual and dramatic decline in the coming years.

Travelli, A.

1983-01-01T23:59:59.000Z

123

Automotive Stirling Engine Development Program Mod I Stirling engine development  

SciTech Connect

The Automotive Stirling Engine (ASE) Development Program was established to enable research and development of alternate propulsion systems. The program was awarded to Mechanical Technology Incorporated (MTI) for the purpose of developing an automotive Stirling engine, and transferring Stirling-engine technology to the United States. MTI has fabricated and tested four Mod I engines that have accumulated over 1900 test hours to date. The engines evaluated in the test cell have achieved an average of 34.5% efficiency at their maximum efficiency point (2000 rpm), and have developed an average maximum output power (power available to the drive train) level of 54.4 kW (73.2 bhp). All engines are still operating, and are being used to develop components and control strategy for the Upgraded Mod I engine design (predicted to increase maximum power output and efficiency while reducing total engine system weight).

Simetkosky, M.A.

1983-08-01T23:59:59.000Z

124

Laboratory Directed Research and Development Program  

E-Print Network (OSTI)

of California. Lawrence Berkeley Laboratory is an equal opportunity employer. #12;Report on Ernest Orlando Lawrence Berkeley National Laboratory Laboratory Directed Research and Development Program FY 2009 Ernest Orlando Lawrence Berkeley National Laboratory Berkeley, CA 94720 MARCH, 2010 Prepared for the U

125

Laboratory Directed Research and Development Program  

E-Print Network (OSTI)

of California. Lawrence Berkeley Laboratory is an equal opportunity employer. #12;Report on Ernest Orlando Lawrence Berkeley National Laboratory Laboratory Directed Research and Development Program FY 2011 Ernest Orlando Lawrence Berkeley National Laboratory Berkeley, CA 94720 MAY, 2012 Prepared for the U

Knowles, David William

126

Laboratory Directed Research and Development Program  

E-Print Network (OSTI)

of California. Lawrence Berkeley Laboratory is an equal opportunity employer. #12;Report on Ernest Orlando Lawrence Berkeley National Laboratory Laboratory Directed Research and Development Program FY 2010 Ernest Orlando Lawrence Berkeley National Laboratory Berkeley, CA 94720 MAY, 2011 Prepared for the U

127

Laboratory Directed Research and Development Program  

E-Print Network (OSTI)

of California. Lawrence Berkeley Laboratory is an equal opportunity employer. #12;Report on Ernest Orlando Lawrence Berkeley National Laboratory Laboratory Directed Research and Development Program FY 2012 Ernest Orlando Lawrence Berkeley National Laboratory Berkeley, CA 94720 APRIL, 2013 Prepared for the U

128

Laboratory Directed Research and Development Program  

E-Print Network (OSTI)

of California. Lawrence Berkeley Laboratory is an equal opportunity employer. #12;Report on Ernest Orlando Lawrence Berkeley National Laboratory Laboratory Directed Research and Development Program FY 2007 Ernest Orlando Lawrence Berkeley National Laboratory Berkeley, CA 94720 MARCH, 2008 Prepared for the U

129

Iron-air battery development program  

SciTech Connect

The progress and status of the research and development program on the iron-air advanced technology battery system at the Westinghouse Electric Corporation during the period June 1978-December 1979 are described. This advanced battery system is being developed for electric vehicle propulsion applications. Testing and evaluation of 100 cm/sup 2/ size cells was undertaken while individual iron and air electrode programs continued. Progress is reported in a number of these study areas. Results of the improvements made in the utilization of the iron electrode active material coupled with manufacturing and processing studies related to improved air electrodes continue to indicate that a fully developed iron-air battery system will be capable of fulfilling the performance requirements for commuter electric vehicles.

Buzzelli, E.S.; Liu, C.T.; Bryant, W.A.

1980-05-01T23:59:59.000Z

130

Director's Discretionary Research and Development Program, Annual Report FY 2007  

Office of Energy Efficiency and Renewable Energy (EERE)

Director's Discretionary Research and Development Program, Annual Report FY 2007 May 2007 Final Draft.

131

Economic Development Tax Credit Program (Wisconsin) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tax Credit Program (Wisconsin) Tax Credit Program (Wisconsin) Economic Development Tax Credit Program (Wisconsin) < Back Eligibility Commercial Agricultural Construction Developer Fuel Distributor Industrial Installer/Contractor Institutional Investor-Owned Utility Low-Income Residential Multi-Family Residential Retail Supplier Systems Integrator Transportation Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Wind Solar Program Info State Wisconsin Program Type Corporate Tax Incentive Provider Wisconsin Economic Development Corporation The Economic Development Tax Credit (ETC) program was enacted in 2009 and eliminated five existing tax credit programs (Agricultural Development Zones, Airport Development Zones, Community Development Zones, Enterprise

132

Multi-Well Experiment MWX-3 As-Built Report DISCLAIMER  

Office of Legacy Management (LM)

Multi-Well Experiment MWX-3 Multi-Well Experiment MWX-3 As-Built Report DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. Category No. UC-92a SAND84-7132 Unlimited Distribution Printed May 1984 MULTI-WELL EXPERIMENT MWX-3 AS-BUILT REPORT Contract Sponsor: SANDIA CORPORATION Division 6253 Albuquerque, N M 871 85 Multi-Well Experiment Project Contract Number: 6 1-3428 Prepared By: CER CORPORATION 2225 E. Flamingo Rd, Suite 300 Las Vegas, NV 89 109 February 1984 ABSTRACT The Multi-Well Experiment, sponsored by the Department o f Energy, has two overall objectives: (1) characterize low-permeability lenticular gas sands and (2) develop and evaluate technology for the production of natural gas from them. The third well o

133

Microsoft Word - Accommodates All Generation Storage Options_Approved_2009_07_01_DISCLAIMER.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

ACCOMMODATES ALL ACCOMMODATES ALL GENERATION AND STORAGE OPTIONS Developed for the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability by the National Energy Technology Laboratory June 2009 Office of Electricity Delivery and Energy Reliability v 3.0 Accommodates All Generation and Storage Options 1 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any

134

Microsoft Word - Title page and disclaimer.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

PROGRESS REPORT PROGRESS REPORT ADVANCED OIL RECOVERY TECHNOLOGIES FOR IMPROVED RECOVERY FROM SLOPE BASIN CLASTIC RESERVOIRS, NASH DRAW BRUSHY CANYON POOL, EDDY COUNTY, NM DOE Cooperative Agreement No. DE-FC-95BC14941 Strata Production Company P.O. Box 1030 Roswell, NM 88202 (505) 622-1127 Date of Report: February 3, 2006 Award Date: September 25, 1995 Actual Completion Date: September 24, 1998 - Budget Period I September 30, 2005 - Budget Period II Name of Project Manager: Mark B. Murphy Contracting Officer's Representative: Dan Ferguson Reporting Period: September 24, 1998 - September 30, 2005 US/DOE Patent Clearance is not required prior to the publication of this document. ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States

135

Renewable Energy Development Grant Program (Oregon) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development Grant Program (Oregon) Development Grant Program (Oregon) Renewable Energy Development Grant Program (Oregon) < Back Eligibility Commercial Residential Savings Category Bioenergy Water Buying & Making Electricity Solar Home Weatherization Heating & Cooling Water Heating Wind Maximum Rebate Up to $250,000, or 35% of total project costs Program Info Funding Source tax credit auctions Start Date 1/1/2012 State Oregon Program Type State Grant Program Rebate Amount Varies by project Provider Program Coordinator '''''This program is not currently accepting applications. Applications under the most recent solicitation were due March 29, 2013.''''' The Oregon Department of Energy (ODOE) offers competitive grants to renewable energy projects as part of ODOE's Energy Incentives Program. ODOE

136

Geothermal Technologies Program Multi-Year Research, Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Multi-Year Research, Development and Demonstration Plan presents the status of geothermal energy technologies and details program plans from 2009 through 2015, with program...

137

Nova Scotia Business Development Program (Nova Scotia, Canada)  

Energy.gov (U.S. Department of Energy (DOE))

The Nova Scotia Business Development Program helps small business get started and existing businesses expand. This program encourages business start-ups and provides help through qualified...

138

OE Power Systems Engineering Research & Development Program Partnerships |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mission » Power Systems Engineering Research and Development » OE Mission » Power Systems Engineering Research and Development » OE Power Systems Engineering Research & Development Program Partnerships OE Power Systems Engineering Research & Development Program Partnerships The OE Power Systems Research and Development Program engages a broad group of stakeholders in program planning, identification of high-priority technology gap areas, and joint participation in research, development, demonstration, and deployment activities. The partnerships involve: Partnerships with Other Federal Programs Federal partnerships include participation with the Federal Energy Management Program (FEMP) to promote and install distributed energy systems at Federal facilities; the Office of Energy Assurance and the Department of

139

Develop programs and policies | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Develop programs and policies Develop programs and policies Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In this section Policies that specify the use of ENERGY STAR tools Campaigns and incentive programs that incorporate ENERGY STAR Lead by example Gather support Develop programs and policies Host a competition Use financing vehicles Promote energy efficiency Develop programs and policies

140

DOE Leadership & Career Development Programs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development » DOE Leadership & Career Development Programs Development » DOE Leadership & Career Development Programs DOE Leadership & Career Development Programs Senior Executive Service Candidate Development Program (SESCDP): This program consists of four Senior Executive Service Development Seminars designed to help position participants for selection into the SES. Each seminar reflects different key components of OPM's Executive Core Qualifications (ECQs). For more information please contact David Rosenmarkle Federal Executive Institute (FEI): At FEI, you will explore and build your knowledge and skills in personal leadership, transforming public organizations, the policy framework in which Government leadership occurs, and the broad global context of international trends and events that shape Government agendas. Since 1968,

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Industrial Energy Efficiency Programs: Development and Trends  

E-Print Network (OSTI)

, address emerging needs, and identify best practices in the administration of today's industrial efficiency programs. The paper will serve as an update on industrial energy efficiency program activities and discuss the ways in which today's programs...

Chittum, A.; Kaufman, N.; Elliot, N.

2010-01-01T23:59:59.000Z

142

Alternative Fuels Data Center: Fuel-Efficient Tire Program Development  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Fuel-Efficient Tire Fuel-Efficient Tire Program Development to someone by E-mail Share Alternative Fuels Data Center: Fuel-Efficient Tire Program Development on Facebook Tweet about Alternative Fuels Data Center: Fuel-Efficient Tire Program Development on Twitter Bookmark Alternative Fuels Data Center: Fuel-Efficient Tire Program Development on Google Bookmark Alternative Fuels Data Center: Fuel-Efficient Tire Program Development on Delicious Rank Alternative Fuels Data Center: Fuel-Efficient Tire Program Development on Digg Find More places to share Alternative Fuels Data Center: Fuel-Efficient Tire Program Development on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Fuel-Efficient Tire Program Development The California Energy Commission (CEC) must adopt and implement a

143

Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan: Program Benefits  

Energy.gov (U.S. Department of Energy (DOE))

The Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan presents the status of geothermal energy technologies and details program plans from 2009 through 2015, with program activities through 2025.

144

Studying Code Development for High Performance Computing: The HPCS Program  

E-Print Network (OSTI)

Studying Code Development for High Performance Computing: The HPCS Program Jeff Carver1 , Sima at measuring the development time for programs written for high performance computers (HPC). Our goal. Introduction The development of High-Performance Computing (HPC) programs (codes) is crucial to progress

Basili, Victor R.

145

Apps for Energy Non-Governmental Resource Disclaimer | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Apps for Energy Non-Governmental Resource Disclaimer Apps for Energy Non-Governmental Resource Disclaimer Apps for Energy Non-Governmental Resource Disclaimer The non-governmental resources are provided strictly for education purposes, and should not be considered a complete list of available resources. Disclaimer This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process,

146

Small Enterprise Development Finance Program (Mississippi) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small Enterprise Development Finance Program (Mississippi) Small Enterprise Development Finance Program (Mississippi) Small Enterprise Development Finance Program (Mississippi) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Mississippi Program Type Corporate Tax Incentive Loan Program Sales Tax Incentive

147

The Development Infrastructure Grant Program (Mississippi) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development Infrastructure Grant Program (Mississippi) Development Infrastructure Grant Program (Mississippi) The Development Infrastructure Grant Program (Mississippi) < Back Eligibility Construction Developer Local Government Municipal/Public Utility Schools Transportation Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Maximum Rebate $150,000 Program Info State Mississippi Program Type Grant Program Provider Community Service Divison The Development Infrastructure Grant Program (DIP) is a grant program that is available to fund publicly owned infrastructure, including electricity generation and distribution. Funding from this program can be used by municipalities and counties to assist with the location or expansion of businesses. Usage of the funds must be directly related to the

148

The Next Linear Collider Klystron Development Program  

E-Print Network (OSTI)

Klystrons capable of 75 MW output power at 11.4 GHz have been under development at SLAC for the last decade. The work has been part of the program to realize all the components necessary for the construction of the Next Linear Collider (NLC). The effort has produced a family of solenoid-focused 50 MW klystrons, which are currently powering a 0.5 GeV test accelerator at SLAC and several test stands, where high power components are evaluated and fundamental research is performed studying rf breakdown and dark current production. Continuing development has resulted in a Periodic Permanent Magnet (PPM) focused 50 MW klystron, tested at SLAC and subsequently contracted for manufacture by industry in England and Japan. A 75 MW version of that PPM klystron was built at SLAC and reached 75 MW, with 2.8 microsecond pulses. Based on this design, a prototype 75 MW klystron, designed for low-cost manufacture, is currently under development at SLAC, and will eventually be procured from industry in modest quantities for ad...

Jongewaard, E; Pearson, C; Phillips, R M; Sprehn, D; Vlieks, A E

2000-01-01T23:59:59.000Z

149

"Recovery Act: Training Program Development for Commercial Building  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Program Development for Commercial Training Program Development for Commercial Building Equipment Technicians, Building Operators, and Energy Commissioning Agents/Auditors" "Recovery Act: Training Program Development for Commercial Building Equipment Technicians, Building Operators, and Energy Commissioning Agents/Auditors" A report detailling the Recovery Act: training program development for commercial building equipment technicians, building operators, and energy commissioning agents/auditors. "Recovery Act: Training Program Development for Commercial Building Equipment Technicians, Building Operators, and Energy Commissioning Agents/Auditors" More Documents & Publications Microsoft Word - FOA cover sheet.doc Microsoft Word - kDE-FOA-0000090.rtf Recovery Act: Wind Energy Consortia between Institutions of Higher Learning

150

Cask systems development program seal technology  

SciTech Connect

General design or test performance requirements for radioactive materials (RAM) packages are specified in Title 10 of the US Code of Federal Regulations Part 71 (10 CFR 71). Seals that provide the containment system interface between the packaging body and the closure must function in both high- and low-temperature environments under dynamic and static conditions. Experiments were performed to characterize the performance of several seal materials at low temperatures. Helium leak tests on face seals were used to compare the materials. Materials tested include butyl, neoprene, ethylene propylene, fuorosilicone, silicone, Eypel, Kalrez, Teflon, fluorocarbon, and Teflon/silicone composites. Results show that the seal materials tested, with the exception of silicone S613-60, are not leak tight at manufacturer low-temperature ratings. This paper documents the initial series of experiments developed to characterize the performance of several static seals under conditions representative of RAM transport container environments. Helium leak rates of face seals were measured at low and ambient temperatures to compare seal materials. As scaling laws have not been developed for seals, the leakage rates measured in this program are intended to be used in a qualitative rather than quantitative manner. 5 refs., 7 figs., 2 tabs.

Madsen, M.M.; Edwards, K.R.; Humphreys, D.L.

1991-01-01T23:59:59.000Z

151

CeraMem Filter Development Program  

SciTech Connect

In gasification systems, the ash and char that is suspended in the syngas stream must be removed prior to the gas stream`s introduction to other downstream air pollution control systems (e.g., hydrogen sulfide removal). The char, once captured, can be reinjected into the gasification reactors to increase the overall system efficiency. If the ash and char are not captured before the other downstream equipment, these solids can foul process piping or columns and cause downtime for the entire system. This paper describes, in general, a development program between Ceramem Separations and Foster Wheeler for a high temperature ceramic filtration system to be sold by their partnership, CeraFilter L.P. In addition, detailed test results of ceramic filters operating at conditions approaching those of high temperature combustors are discussed. The successful development of this hot gas filtration system based upon the Ceramem ceramic-membrane-coated, monolithic filter will help address the critical challenges of particulate removal under the severe conditions imposed by advanced fossil energy power systems.

Bishop, B. [CeraMem Corp., Waltham, MA (United States); Raskin, N. [CeraFilter L.P., San Diego, CA (United States)

1996-12-31T23:59:59.000Z

152

Austria-Program on Technologies for Sustainable Development | Open Energy  

Open Energy Info (EERE)

Austria-Program on Technologies for Sustainable Development Austria-Program on Technologies for Sustainable Development Jump to: navigation, search Name Austria-Program on Technologies for Sustainable Development Agency/Company /Organization Nachhaltig Wirtschaften Sector Energy Focus Area Renewable Energy Topics Background analysis, Technology characterizations Website http://www.nachhaltigwirtschaf Country Austria UN Region Western Europe References Program on Technologies for Sustainable Development[1] Background "This initiative has been developed by the Austrian Federal Ministry of Transport, Innovation and Technology (BMVIT). It initiates and supports trendsetting research and development projects and the implementation of exemplary pilot projects." Objectives "*New opportunities for the economy

153

Ohio Coal Research and Development Program (Ohio) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ohio Coal Research and Development Program (Ohio) Ohio Coal Research and Development Program (Ohio) Ohio Coal Research and Development Program (Ohio) < Back Eligibility Agricultural Commercial Industrial Institutional Investor-Owned Utility Municipal/Public Utility Nonprofit Rural Electric Cooperative Schools Program Info Funding Source Ohio Development Services Agency State Ohio Program Type Grant Program Provider Ohio Development Services Agency The Ohio Coal Development Office invests in the development and implementation of technologies that can use Ohio's vast reserves of coal in an economical, environmentally sound manner. Projects are identified through public solicitations and may include technologies that improve combustion efficiencies, remove various pollutants from emissions, develop productive uses for the by-products of combustion, and investigate new uses

154

Federal Energy Management Program: Develop an Institutional Change Action  

NLE Websites -- All DOE Office Websites (Extended Search)

Develop an Develop an Institutional Change Action Plan for Sustainability to someone by E-mail Share Federal Energy Management Program: Develop an Institutional Change Action Plan for Sustainability on Facebook Tweet about Federal Energy Management Program: Develop an Institutional Change Action Plan for Sustainability on Twitter Bookmark Federal Energy Management Program: Develop an Institutional Change Action Plan for Sustainability on Google Bookmark Federal Energy Management Program: Develop an Institutional Change Action Plan for Sustainability on Delicious Rank Federal Energy Management Program: Develop an Institutional Change Action Plan for Sustainability on Digg Find More places to share Federal Energy Management Program: Develop an Institutional Change Action Plan for Sustainability on AddThis.com...

155

Public Sector Procurement: Issues in Program Development & Delivery  

NLE Websites -- All DOE Office Websites (Extended Search)

Public Sector Procurement: Issues in Program Development & Delivery Public Sector Procurement: Issues in Program Development & Delivery Title Public Sector Procurement: Issues in Program Development & Delivery Publication Type Report LBNL Report Number LBNL-6015E Year of Publication 2012 Authors Payne, Christopher T., and Andrew Weber Publisher LBNL Abstract The primary intention of this document is to illustrate the key issues and considerations made during the course of implementing a sustainable procurement program. Our primary sources of information have been our partners in the Super Efficient Equipment and Appliance Deployment (SEAD) Initiative Procurement Working Group. Where applicable, we have highlighted specific ways in which working group participants have successfully overcome these barriers. It is our hope that the issues discussed in this book will benefit developed and developing programs alike. In countries with less developed sustainable procurement programs, we hope that the discussions contained in the document will aid in the planning process. In addition, we hope that consideration of some of these key issues in the beginning stages of program implementation will help avoid some of the pitfalls experienced by more mature programs. In the case of more developed programs, we hope this book will spur conversation among those responsible for administering and evaluating sustainable procurement programs. In many cases, developed programs are seeking to improve existing processes and develop more effective purchaser resources.

156

Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

7: 7: Develop a Marketing Plan to someone by E-mail Share Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Facebook Tweet about Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Twitter Bookmark Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Google Bookmark Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Delicious Rank Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Digg Find More places to share Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on AddThis.com... Getting Started Driving Demand Set Goals & Objectives Create an Evaluation Plan Conduct Audience Research Identify Target Audiences & Behavior Changes

157

EBT-P Magnet Development Program summary  

SciTech Connect

The ELMO Bumpy Torus Proof-of-Principle Magnet Development Program, which began in 1979, has fabricated and tested three NbTi superconducting magnets. The magnets are metastable with a maximum winding pack current density of 10,000 A/cm/sup 2/ at a peak field of 7.4 T. Each magnet has been installed in a closefitting dewar with a warm bore. Previous publications have reported successful tests of the first two windings in a large dewar, tests of the first complete magnet in its own dewar, and construction details of the dewars. This paper gives procedures and results for the test of the third winding in an open dewar, the test of the second single magnet in its own dewar, and two tests in which two magnets were run in series to generate a 73,000-lb side load at 5 T. The last tests verified the mechanical integrity of the design and qualified two of the magnets for use in the National Radio Frequency Test Facility.

McManamy, T.J.; Lue, J.W.; Ballou, J.K.; Mann, T.L.; Shen, S.S.; Wilson, C.T.

1984-01-01T23:59:59.000Z

158

Thailand-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Thailand-Low Emissions Asian Development (LEAD) Program Thailand-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Thailand-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Thailand South-Eastern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

159

Bangladesh-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Bangladesh-Low Emissions Asian Development (LEAD) Program Bangladesh-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Bangladesh-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Bangladesh Southern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

160

Nepal-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Nepal-Low Emissions Asian Development (LEAD) Program Nepal-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Nepal-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Nepal Southern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Vietnam-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Vietnam-Low Emissions Asian Development (LEAD) Program Vietnam-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Vietnam-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Vietnam South-Eastern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

162

Malaysia-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Malaysia-Low Emissions Asian Development (LEAD) Program Malaysia-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Malaysia-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Malaysia South-Eastern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

163

Philippines-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Philippines-Low Emissions Asian Development (LEAD) Program Philippines-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Philippines-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Philippines South-Eastern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

164

Laos-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Laos-Low Emissions Asian Development (LEAD) Program Laos-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Laos-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Laos South-Eastern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

165

New Career Development Program Equips EM Employees with Leadership Skills |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Career Development Program Equips EM Employees with Leadership Career Development Program Equips EM Employees with Leadership Skills New Career Development Program Equips EM Employees with Leadership Skills May 30, 2013 - 12:00pm Addthis Members of the 2013 AAGEN SES Development Program class gather for a photo at the program’s kickoff at the White House in March 2012. EM’s John Moon and Dr. Ming Zhu are in the second row; Moon is second from left and Zhu is third from left. Melvin G. Williams, Jr., former Associate Deputy Energy Secretary, is seated far left in the first row. Members of the 2013 AAGEN SES Development Program class gather for a photo at the program's kickoff at the White House in March 2012. EM's John Moon and Dr. Ming Zhu are in the second row; Moon is second from left and Zhu is third from left. Melvin G. Williams, Jr., former Associate Deputy

166

Commercial Building Energy Asset Score Program Development |...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

establish a scoring system, such as data centers, food sales, food service, laboratories, health-care facilities, refrigerated warehouses, and so on. The Program Overview and...

167

Groovy Programming: An Introduction for Java Developers  

Science Journals Connector (OSTI)

Groovy Programming is an introduction to the Java-based scripting language Groovy. Groovy has much in common with popular scripting languages such as Perl, Python, and Ruby, but is written in a Java-like syntax. And, unlike these other languages, ... Keywords: Programming Languages

Kenneth Barclay; John Savage

2006-12-01T23:59:59.000Z

168

An Overview of the Ciao Multiparadigm Language and Program Development  

E-Print Network (OSTI)

An Overview of the Ciao Multiparadigm Language and Program Development Environment and its Design Development Technology Universidad Polit´ecnica de Madrid University of New Mexico Universidad Complutense de provides an informal overview of the language and program development environment. It aims at illustrating

Puebla, Germán

169

Nuclear Safety Research and Development Program Operating Plan | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Operating Plan Program Operating Plan Nuclear Safety Research and Development Program Operating Plan July 5, 2012 Nuclear Safety Research and Development Program Operating Plan This operating plan outlines the mission, goals, and processes for the Department of Energy's (DOE) Nuclear Safety Research & Development (NSR&D) Program. This first version of the operating plan also discusses the startup phase of the program. NSR&D involves a systematic search for knowledge to advance the fundamental understanding of nuclear safety science and technology through scientific study, analysis, modeling, and experiments. Maintaining an effective NSR&D program will support DOE and the National Nuclear Security Administration (NNSA) in standards development, validation of analytical models and

170

Economic Development for a Growing Economy Tax Credit Program (Illinois) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Economic Development for a Growing Economy Tax Credit Program Economic Development for a Growing Economy Tax Credit Program (Illinois) Economic Development for a Growing Economy Tax Credit Program (Illinois) < Back Eligibility Agricultural Commercial Construction Industrial Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Illinois Program Type Corporate Tax Incentive Provider Illinois Department of Commerce and Economic Opportunity The Economic Development for a Growing Economy Tax Credit Program encourages companies to remain, expand, or locate in Illinois. The program provides tax credits to qualifying companies equal to the amount of state income taxes withheld from salaries for newly created jobs. A company must

171

Lighting Development, Adoption, and Compliance Guide BUILDING TECHNOLOGIES PROGRAM I  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Development, Adoption, and Compliance Guide BUILDING TECHNOLOGIES PROGRAM I Lighting Development, Adoption, and Compliance Guide BUILDING TECHNOLOGIES PROGRAM I Lighting BUILDING TECHNOLOGIES PROGRAM Development, Adoption, and Compliance Guide Lighting BUILDING TECHNOLOGIES PROGRAM September 2012 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 | PNNL-SA-90653 Development, Adoption, and Compliance Guide 3.3 Exterior Lighting Controls ...........................................................................24 3.3.1 Dusk to Dawn Controls ...............................................................................25 3.3.2 Lighting Power Reduction Controls ........................................................25 3.3.3 Parking Garage Controls ............................................................................26

172

EM's Development Program for New Managers/Supervisors Presentation  

Energy.gov (U.S. Department of Energy (DOE))

This development program provides new managers and supervisors with 80 hours of developmental activities during the first two years they are in a leadership position.

173

"Recovery Act: Training Program Development for Commercial Building...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

"Recovery Act: Training Program Development for Commercial Building Equipment Technicians, Building Operators, and Energy Commissioning AgentsAuditors" "Recovery Act: Training...

174

Developing a Consumer Health Resource Information Service Program...  

NLE Websites -- All DOE Office Websites (Extended Search)

Communities Reviewed June 2011 DEVELOPING A CONSUMER HEALTH RESOURCE INFORMATION SERVICE PROGRAM: A GUIDE FOR FAITH-BASED ORGANIZATIONS AND COMMUNITIES Reviewed June 2011 Sponsored...

175

RPSEA Final Report Small Producers Program Development Strategies...  

NLE Websites -- All DOE Office Websites (Extended Search)

Final Report Small Producers Program Development Strategies for Maximizing East Texas Oil Field Production Contract No. 08123-16 July 15, 2014 Fred P. Wang Research Scientist...

176

Fuel Cycle Research and Development Program  

Office of Environmental Management (EM)

29, 2009 Fuel Cycle Research and Development DM 195665 5 Identify the governing phenomenology Identify the governing phenomenology Develop a first-principle based model of the...

177

ORNL Global Change and Developing Country Programs | Open Energy  

Open Energy Info (EERE)

ORNL Global Change and Developing Country Programs ORNL Global Change and Developing Country Programs (Redirected from Global Change and Developing Country Programs) Jump to: navigation, search Logo: Global Change and Developing Country Programs Name Global Change and Developing Country Programs Agency/Company /Organization Oak Ridge National Laboratory Sector Energy Website http://www.esd.ornl.gov/eess/g References Global Change [1] "For more than twenty years, ORNL has been active in energy and environmental collaborations with developing countries. Projects have involved more than forty countries in Africa, Asia, Eastern Europe, Latin America and the Caribbean, and the Middle East; and they have included every major kind of energy technology and policy, along with a wide range of environmental technologies and policies." [1]

178

Indonesia-Low Emissions Asian Development (LEAD) Program | Open Energy  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Indonesia-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Indonesia-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Indonesia South-Eastern Asia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and

179

Nuclear Safety Reserch and Development Program Operating Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Research and Development Safety Research and Development Program Operating Plan Office of Nuclear Safety Office of Health, Safety and Security U.S. Department of Energy June 2012 INTENTIONALLY BLANK NSR&D Program Operating Plan June 2012 Table of Contents 1.0 INTRODUCTION................................................................................................................. 1 2.0 BACKGROUND ................................................................................................................... 1 3.0 OBJECTIVES ....................................................................................................................... 2 4.0 NSR&D PROGRAM PROCESSES .................................................................................... 3

180

Economic Development Bond Program (Iowa) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bond Program (Iowa) Bond Program (Iowa) Economic Development Bond Program (Iowa) < Back Eligibility Agricultural Commercial Industrial Institutional Investor-Owned Utility Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Rural Electric Cooperative Schools Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info Funding Source Iowa Finance Authority State Iowa Program Type Bond Program Provider Iowa Finance Authority Through its Economic Development Bond Program, the Iowa Finance Authority (IFA) issues tax-exempt bonds on behalf of private entities or organizations for eligible purposes. The responsibility for repayment of the bonds rests with the applicant. Neither IFA nor the State of Iowa has

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

MSU Industrial Affiliates Program Guidelines MSU Departments or organizations that are developing industrial affiliates programs  

E-Print Network (OSTI)

Engineering is attached. A Best Practices Manual on developing industrial collaboration programs can be found at: http://erc-assoc.org/best_practices/best-practices-manual The Technology Transfer Office industrial affiliates programs should use a structure that is best suited for the program and the affiliates

Lawrence, Rick L.

182

DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...  

NLE Websites -- All DOE Office Websites (Extended Search)

organisation conducting these activities should have an ITER approved QA Program or an ISO 9001 accredited quality system. The general requirements are detailed in ITER document...

183

DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...  

NLE Websites -- All DOE Office Websites (Extended Search)

MAI Machine Assembly and Installation (Section) MQP Management and Quality Program NDE Non-Destructive test and Examination PIA Protection Important Activity PIC Protection...

184

Low Emissions Asian Development (LEAD) Program | Open Energy Information  

Open Energy Info (EERE)

Development (LEAD) Program Development (LEAD) Program (Redirected from Low Emission Asian Development (LEAD) Program) Jump to: navigation, search Name Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Bangladesh, Cambodia, India, Indonesia, Laos, Malaysia, Nepal, Papua New Guinea, Philippines, Thailand, Vietnam Southern Asia, South-Eastern Asia, Southern Asia, South-Eastern Asia, South-Eastern Asia, South-Eastern Asia, Southern Asia, Melanesia, South-Eastern Asia, South-Eastern Asia, South-Eastern Asia

185

START Program for Renewable Energy Project Development Assistance |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program for Renewable Energy Program for Renewable Energy Project Development Assistance START Program for Renewable Energy Project Development Assistance The Strategic Technical Assistance Response Team (START) Program is part of the DOE Office of Indian Energy effort to assist in the development of tribal renewable energy projects. Through the START Program for Renewable Energy Project Development Assistance, a team of DOE and national laboratory experts will work directly with tribal communities to evaluate project financial and technical feasibility, provide on-going training to community members, and help implement a variety of clean energy projects, including energy storage infrastructure, renewable energy deployment, and energy efficiency. The following projects were selected for the 2013 START Renewable Energy

186

AAGEN SES Development Program - Application Deadline | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AAGEN SES Development Program - Application Deadline AAGEN SES Development Program - Application Deadline AAGEN SES Development Program - Application Deadline December 31, 2013 8:00AM EST Course Start/End Date: The training sessions will be held each quarter, the next class will commence in April 2014, and the program will continue through March 2015. Course Type: Classroom Course Location: Washington, D.C. metro area Course Description: The Asian American Government Executives Network (AAGEN) is now accepting applications from anyone interested in this SES Development Program through December 31, 2013. This career enhancing opportunity is available to aspiring SES candidates at the GS-15 equivalent level or higher with at least one year of experience as a supervisor. Twenty applicants will be selected from the federal civil service and four

187

Utility programs for substation diagnostics development  

SciTech Connect

This article is a brief overview of the opening remarks of the utility panel. These remarks developed a number of interesting substation diagnostic activities and concepts in which the electric utilities are engaged and outlined the considerations which must accompany development of diagnostic sensors and systems. These area include transformer diagnostics, circuit breaker diagnostics, and testing/cost of diagnostic systems.

NONE

1996-03-01T23:59:59.000Z

188

Copyright & Disclaimer Information Copyright 1994, 1995, 1996,1997 Career Guidance Foundation  

E-Print Network (OSTI)

#12;Copyright & Disclaimer Information Copyright© 1994, 1995, 1996,1997 Career Guidance Foundation CollegeSource digital catalogs are derivitave works owned and copyrighted by Career Guidance Foundation. Catalog content is owned and copyrighted by the appropriate school. While the Career Guidance Foundation

Bertini, Robert L.

189

Senior Executive Service Candidate Development Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Service Candidate Development Program Service Candidate Development Program Senior Executive Service Candidate Development Program The Office of Learning and Workforce Development coordinates applications for all DOE Federal Employees. Overview The Department of Energy's (DOE) Senior Executive Service (SES) Candidate Development Program (SESCDP) is a critical component of the Department's succession planning strategy for executives. We currently project approximately from 25 to 50 Senior Executive vacancies every year over the next several years. DOE's SESCDP is intended to produce a cadre of SES-ready federal employees capable of being placed non-competitively into SES vacancies. Although successful completion of the SESCDP does not guarantee placement into an SES position, it does result in

190

ORNL Global Change and Developing Country Programs | Open Energy  

Open Energy Info (EERE)

Change and Developing Country Programs Change and Developing Country Programs Jump to: navigation, search Logo: Global Change and Developing Country Programs Name Global Change and Developing Country Programs Agency/Company /Organization Oak Ridge National Laboratory Sector Energy Website http://www.esd.ornl.gov/eess/g References Global Change [1] "For more than twenty years, ORNL has been active in energy and environmental collaborations with developing countries. Projects have involved more than forty countries in Africa, Asia, Eastern Europe, Latin America and the Caribbean, and the Middle East; and they have included every major kind of energy technology and policy, along with a wide range of environmental technologies and policies." [1] References ↑ 1.0 1.1 Global Change Retrieved from

191

Low Emissions Asian Development (LEAD) Program | Open Energy Information  

Open Energy Info (EERE)

Emissions Asian Development (LEAD) Program Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Bangladesh, Cambodia, India, Indonesia, Laos, Malaysia, Nepal, Papua New Guinea, Philippines, Thailand, Vietnam Southern Asia, South-Eastern Asia, Southern Asia, South-Eastern Asia, South-Eastern Asia, South-Eastern Asia, Southern Asia, Melanesia, South-Eastern Asia, South-Eastern Asia, South-Eastern Asia References LEAD Program[1]

192

Clean coal technologies: Research, development, and demonstration program plan  

SciTech Connect

The US Department of Energy, Office of Fossil Energy, has structured an integrated program for research, development, and demonstration of clean coal technologies that will enable the nation to use its plentiful domestic coal resources while meeting environmental quality requirements. The program provides the basis for making coal a low-cost, environmentally sound energy choice for electric power generation and fuels production. These programs are briefly described.

Not Available

1993-12-01T23:59:59.000Z

193

DOE's Advanced Coal Research, Development, and Demonstration Program to  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE's Advanced Coal Research, Development, and Demonstration DOE's Advanced Coal Research, Development, and Demonstration Program to Develop Low-carbon Emission Coal Technologies DOE's Advanced Coal Research, Development, and Demonstration Program to Develop Low-carbon Emission Coal Technologies March 11, 2009 - 3:18pm Addthis Statement of Victor K. Der, Acting Assistant Secretary, Office of Fossil Energy before the Subcommittee on Energy and Environment, Committee on Science and Technology, U.S. House of Representatives. Thank you, Mr. Chairman and Members of the Committee. I appreciate this opportunity to provide testimony on the U.S. Department of Energy's (DOE's) advanced coal research, development, and demonstration program to develop low-carbon emission coal technologies. Introduction Fossil fuel resources represent a tremendous national asset. An abundance

194

DOE's Advanced Coal Research, Development, and Demonstration Program to  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Coal Research, Development, and Demonstration Advanced Coal Research, Development, and Demonstration Program to Develop Low-carbon Emission Coal Technologies DOE's Advanced Coal Research, Development, and Demonstration Program to Develop Low-carbon Emission Coal Technologies March 11, 2009 - 3:18pm Addthis Statement of Victor K. Der, Acting Assistant Secretary, Office of Fossil Energy before the Subcommittee on Energy and Environment, Committee on Science and Technology, U.S. House of Representatives. Thank you, Mr. Chairman and Members of the Committee. I appreciate this opportunity to provide testimony on the U.S. Department of Energy's (DOE's) advanced coal research, development, and demonstration program to develop low-carbon emission coal technologies. Introduction Fossil fuel resources represent a tremendous national asset. An abundance

195

17.5 - Program Research and Development Accouncement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 (June 2004) 5 (June 2004) 1 PROGRAM RESEARCH AND DEVELOPMENT ANNOUNCEMENTS Overview This section discusses procedures for the submission, evaluation, and selection for award of proposals offered in response to Program Research and Development Announcements (PRDAs). PRDAs are issued by DOE to conduct research, development, and related activities in the energy field. Background PRDAs are competitive solicitations for research, development, and related projects in specified areas of interest. They differ from traditional research and development acquisition solicitations which seek the best technical/cost approach to a specific problem. Under PRDAs, it is contemplated that multiple awards will be made covering a variety of areas of interest with a

196

Power Planning and Fish and Wildlife Program Development  

E-Print Network (OSTI)

Power Planning and Fish and Wildlife Program Development RELATIONSHIP OF THE POWER PLAN TO THE FISH AND WILDLIFE PROGRAM: SUFFICIENT RESOURCES TO MEET ELECTRICITY DEMANDS AND THE REQUIREMENTS FOR FISH and to accommodate system operations to benefit fish and wildlife. The central purpose of this chapter of the power

197

Development of a Successful Program in Reliability and Maintainability Engineering  

E-Print Network (OSTI)

­ Video or audio clips #12;Graduate Programs in Reliability Maintenance and EngineeringDevelopment of a Successful Program in Reliability and Maintainability Engineering Dr. Wes Hines Head, Nuclear Engineering College of Engineering The University of Tennessee jhines2@utk.edu UMD

Bernstein, Joseph B.

198

Information for Development Program (infoDev) | Open Energy Information  

Open Energy Info (EERE)

Development Program (infoDev) Development Program (infoDev) Jump to: navigation, search Logo: Information for Development Program (infoDev) Name Information for Development Program (infoDev) Place Washington DC Coordinates 38.8951118°, -77.0363658° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.8951118,"lon":-77.0363658,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

199

Object-oriented programming and software development: a critical assessment  

Science Journals Connector (OSTI)

In software engineering, object-oriented development is today the most popular programming, design and analysis approach. However, object orientation does not manage to address the needs of today's software construction in as radical and fundamental ...

Manfred Broy

2003-01-01T23:59:59.000Z

200

Internet Program Development Leading to Certification in Substance Abuse Prevention  

Science Journals Connector (OSTI)

The purpose of this project was to develop a multidisciplinary educational program that would provide information needed to work more efficiently in substance abuse prevention and prepare the lea...

Julia Hagemaster

2001-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Community Economic Development Business Program (Prince Edward Island, Canada)  

Energy.gov (U.S. Department of Energy (DOE))

The Community Economic Development Business (CEDB) program has been created as part of the Prince Edward Island Rural Action Plan to support local investment in innovative Prince Edward Island...

202

Tools for Nanotechnology Education Development Program  

SciTech Connect

The overall focus of this project was the development of reusable, cost-effective educational modules for use with the table top scanning electron microscope (TTSEM). The goal of this project's outreach component was to increase students' exposure to the science and technology of nanoscience.

Dorothy Moore

2010-09-27T23:59:59.000Z

203

Progress report of advanced conductor development program at ORNL  

SciTech Connect

This report describes the current research activities related to the development of practical high-field superconducting conductors and magnets at Oak Ridge National Laboratory (ORNL). They can be divided into two categories: (1) 12-T conductor development program, and (2) tests of Nb/sub 3/Sn conductor for the Westinghouse Large Coil Program (LCP) coil. The objective and status of each are presented below.

Shen, S.S.; Fietz, W.A.; Lubell, M.S.

1984-01-01T23:59:59.000Z

204

Raciometry J. W. Griffin, Technical Monitor ARM Instrument Development Program  

NLE Websites -- All DOE Office Websites (Extended Search)

J. W. Griffin, Technical Monitor J. W. Griffin, Technical Monitor ARM Instrument Development Program Pacific Northwest Laboratory Richland, Washington the end of FY93 are noted. Fiscal Year 1993 is the third and final year of the initial (3-year) funding cycle for ARM- funded instrument development projects. That is, IDP principal investigators will be required to submit a new proposal in order to be considered for funding beyond September 30, 1993. As for the first funding cycle, continuation proposals will be peer-reviewed and funding awarded on a competitive basis. Goals of the Instrument Development Program The primary goal of the Atmospheric Radiation Measurement (ARM) Instrument Development Program (lOP) is to develop fieldable atmospheric sensing systems which 1) provide a needed atmospheric observation/

205

Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development ProgramsSummary Report  

SciTech Connect

This document is a summarization of the report, Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs, the final report for phase 2 of the SPSP (DOE workforce study) project.

O'Neil, Lori Ross; Assante, Michael; Tobey, D. H.; Conway, T. J.; Vanderhorst, Jr, T. J.; Januszewski, III, J.; Leo, R.; Perman, K.

2013-07-01T23:59:59.000Z

206

Thin polymer icemaker development and test program  

SciTech Connect

We have constructed and tested a small device to produce ice in ice/water mixtures using a cold fluid as the heat sink. The device is a flexible heat exchanger constructed from a thin film of a suitable polymer. When filled with circulating liquid coolant the heat exchanger consists of an inflated series of parallel tubes; ice forms on the outside in complementary half cylinders. When the circulation is cut off, gravity drains the coolant and the static head of the water bath crushes the tubes, freeing them from the ice which floats to the surface. Brine circulation is then re-started and the cycle begins again. Here we report recent testing of this device: it makes ice readily under water and easily sheds the semi-cylinders of ice over many cycles of operation. It produces ice at a rate of 10 kg/m{sup 2}-hour. It offers substantial benefits in simplicity and reliability over mechanical harvester ice making systems, and the potential for significant improvements in energy efficiency compared to systems which use a re-heat cycle to harvest the ice. A reliable method of leak detection has been developed. The device should be of substantial value to systems where efficiency and reliability are at a premium, such as slush ice for district cooling.

Leigh, R.W. (Pratt Inst., Brooklyn, NY (United States))

1991-08-01T23:59:59.000Z

207

Developing a model lifeline protection program for DOE facilities  

SciTech Connect

A National Lifeline Standard Development Program is currently being conducted by FEMA and NIST. The Department of Energy is following these developments and supplementing them to meet Life-Safety and mission requirements for all DOE facilities as part of the Natural Phenomena Hazards Mitigation Plan. The task will be overseen by a DOE management team with technical guidance provided by a Steering Group of management and operating contractor representatives. The DOE will participate in the federal program by conducting a workshop on lifeline protection issues, developing an overall plan, organizing a Steering Group, and conducting a pilot study at a DOE facility.

Lowing, A.N.

1996-11-01T23:59:59.000Z

208

Information for Development Program (infoDev) Feed | Open Energy  

Open Energy Info (EERE)

for Development Program (infoDev) Feed for Development Program (infoDev) Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

209

Clark County Develops On-the-Job Weatherization Training Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clark County Develops On-the-Job Weatherization Training Program Clark County Develops On-the-Job Weatherization Training Program Clark County Develops On-the-Job Weatherization Training Program June 9, 2010 - 11:02am Addthis Stephen Graff Former Writer & editor for Energy Empowers, EERE What are the key facts? Southwest Washington Workforce Development Council and the State Board of Community and Technical Colleges received over $200,000 under the American Recovery and Reinvestment Act to fund the weatherization training at Clark College There was a classic chicken-or-the-egg moment in Washington State's Clark County last year when officials learned about the million dollars heading their way for additional home energy upgrades. What comes first, weatherization training or jobs? "We knew the Stimulus funds were coming...but there was not a huge

210

RELAP5-3D Developer Guidelines and Programming Practices  

SciTech Connect

Our ultimate goal is to create and maintain RELAP5-3D as the best software tool available to analyze nuclear power plants. This begins with writing excellent programming and requires thorough testing. This document covers development of RELAP5-3D software, the behavior of the RELAP5-3D program that must be maintained, and code testing. RELAP5-3D must perform in a manner consistent with previous code versions with backward compatibility for the sake of the users. Thus file operations, code termination, input and output must remain consistent in form and content while adding appropriate new files, input and output as new features are developed. As computer hardware, operating systems, and other software change, RELAP5-3D must adapt and maintain performance. The code must be thoroughly tested to ensure that it continues to perform robustly on the supported platforms. The coding must be written in a consistent manner that makes the program easy to read to reduce the time and cost of development, maintenance and error resolution. The programming guidelines presented her are intended to institutionalize a consistent way of writing FORTRAN code for the RELAP5-3D computer program that will minimize errors and rework. A common format and organization of program units creates a unifying look and feel to the code. This in turn increases readability and reduces time required for maintenance, development and debugging. It also aids new programmers in reading and understanding the program. Therefore, when undertaking development of the RELAP5-3D computer program, the programmer must write computer code that follows these guidelines. This set of programming guidelines creates a framework of good programming practices, such as initialization, structured programming, and vector-friendly coding. It sets out formatting rules for lines of code, such as indentation, capitalization, spacing, etc. It creates limits on program units, such as subprograms, functions, and modules. It establishes documentation guidance on internal comments. The guidelines apply to both existing and new subprograms. They are written for both FORTRAN 77 and FORTRAN 95. The guidelines are not so rigorous as to inhibit a programmers unique style, but do restrict the variations in acceptable coding to create sufficient commonality that new readers will find the coding in each new subroutine familiar. It is recognized that this is a living document and must be updated as languages, compilers, and computer hardware and software evolve.

Dr. George L Mesina

2014-03-01T23:59:59.000Z

211

Development of an injection augmentation program at the Dixie Valley,  

Open Energy Info (EERE)

an injection augmentation program at the Dixie Valley, an injection augmentation program at the Dixie Valley, Nevada geothermal field Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Development of an injection augmentation program at the Dixie Valley, Nevada geothermal field Abstract Evaporative cooling at geothermal power plants generally reduces reservoir pressures even if all available geothermal liquids are reinjected. Controlled programs of injecting non geothermal waters directly into reservoirs have been tested or implemented at only four fields, three of them being vapor dominated. At the liquid-dominated Dixie Valley geothermal field an unsuccessful search for a large volume source of warm,chemically desirable fluid for augmentation was conducted.After determining water

212

The joint DoD/DOE Munitions Technology Development Program  

SciTech Connect

The joint Department of Defense (DoD)/Department of Energy (DOE) Munitions Technology Development Program is a cooperative, jointly funded effort of research and development to improve nonnuclear munitions technology across all service mission areas. This program is enabled under a Memorandum of Understanding, approved in 1985 between the DoD and the DOE, that tasks the nuclear weapons laboratories of the DOE to solve problems in conventional defense. The selection of the technical areas to be investigated is based on their importance to the military services, the needs that are common to the conventional and nuclear weapons programs, the expertise of the performing organization, and the perceived benefit to the overall national defense efforts. The research benefits both DoD and DOE programs; therefore, funding, planning, and monitoring are joint activities. Technology Coordination Groups (TCGs), organized by topical areas, serve as technology liaisons between the DoD and DOE for the exchange of information. The members of the TCGs are technical experts who meet semiannually in an informal workshop format to coordinate multiagency requirements, establish project plans, monitor technical activity, and develop classification guidance. A technical advisory committee of senior DoD and DOE managers administers the program and provides guidance on policy and strategy. The abstracts in this volume were collected from the technical progress report for fiscal year 1993. The annual report is organized by major technology areas. Telephone and fax numbers for the principal contacts are provided with each abstract.

Repa, J.V. Jr.

1994-08-01T23:59:59.000Z

213

GEOTHERMAL ENERGY DEVELOPMENT PAUL KRUGER  

Office of Scientific and Technical Information (OSTI)

ENERGY DEVELOPMENT PAUL KRUGER . NOVEMBER, 1975 SGP-TR-9 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither...

214

DOE/NREL Advanced Wind Turbine Development Program  

SciTech Connect

The development of technologically advanced, high-efficiency wind turbines continues to be a high-priority activity of the US wind industry. The National Renewable Energy Laboratory (formerly the Solar Energy Research Institute), sponsored by the US Department of Energy (DOE), has initiated the Advanced Wind Turbine Program to assist the wind industry in the development of a new class of advanced wind turbines. The initial phase of the program focused on developing conceptual designs for near-term and advanced turbines. The goal of the second phase of this program is to use the experience gained over the last decade of turbine design and operation combined with the latest existing design tools to develop a turbine that will produce energy at $0.05 per kilowatt-hour (kWh) in a 5.8-m/s (13-mph) wind site. Three contracts have been awarded, and two more are under negotiation in the second phase. The third phase of the program will use new innovations and state-of-the-art wind turbine design technology to produce a turbine that will generate energy at $0.04/kWh in a 5.8-m/s wind site. Details of the third phase will be announced in early 1993.

Butterfield, C.P.; Smith, B.; Laxson, A.; Thresher, B. [National Renewable Energy Lab., Golden, CO (United States)] [National Renewable Energy Lab., Golden, CO (United States); Goldman, P. [USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Wind/Hydro/Ocean Technologies Div.] [USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Wind/Hydro/Ocean Technologies Div.

1993-05-01T23:59:59.000Z

215

A Technology Overview of the PowerChip Development Program  

E-Print Network (OSTI)

The PowerChip research program is developing technologies to radically improve the size, integration, and performance of power electronics operating at up to grid-scale voltages (e.g., up to 200V) and low-to-moderate power ...

Araghchini, Mohammad

216

Fuel Cells for Transportation- Research and Development: Program Abstracts  

Energy.gov (U.S. Department of Energy (DOE))

Remarkable progress has been achieved in the development of proton-exchange-membrane(PEM) fuel cell technology since the U.S. Department of Energy (DOE) initiated a significant developmental program in the early 1990s. This progress has stimulated enormous interest worldwide in developing fuel cell products for transportation as well as for stationary and portable power applications. The potential markets are huge, but so are the R&D risks. Given the potential for PEM fuel cells to deliver large economic and environmental benefits to the Nation, DOE continues to take a leadership role in developing and validating this technology. DOEs strategy to implement its Fuel Cells for Transportation program has three components: an R&D strategy, a fuels strategy, and a management strategy.

217

Development of a Training Program for Commercial Building Technicians  

SciTech Connect

This project focused on developing and deploying a comprehensive program of 22 training modules, including certification requirements, and accreditation standards for commercial building technicians, to help achieve the full savings potential of energy efficient buildings, equipment, and systems. This curriculum extended the currently available commercial building technician programs -- training a labor force in a growing market area focused on energy efficiency. The program helps to remove a major market impediment to low energy/zero energy commercial building system acceptance, namely a lack of operating personnel capable of handling more complex high efficiency systems. The project developed a training curriculum for commercial building technicians, with particular focus on high-efficiency building technology, and systems. In Phase 1, the project team worked collaboratively in developing a draft training syllabus to address project objectives. The team identified energy efficiency knowledge gaps in existing programs and plans and plans to address the gaps with either modified or new curricula. In Phase 2, appropriate training materials were developed to meet project objectives. This material was developed for alternative modes of delivery, including classroom lecture materials, e-learning elements, video segments, exercises, and hands-on training elements. A Certification and Accreditation Plan and a Commercialization and Sustainability Plan were also investigated and developed. The Project Management Plan was updated quarterly and provided direction on the management approaches used to accomplish the expected project objectives. GTI project management practices tightly coordinate project activities using management controls to deliver optimal customer value. The project management practices include clear scope definition, schedule/budget tracking, risk/issue resolution and team coordination.

Rinholm, Rod

2013-05-31T23:59:59.000Z

218

Community Development Finance Institutions-Opportunities for Partnerships with Energy Efficiency Programs Transcript.doc  

Energy.gov (U.S. Department of Energy (DOE))

Community Development Finance Institutions-Opportunities for Partnerships with Energy Efficiency Programs Transcript.doc

219

Community Development Finance Institutions- Opportunities for Partnerships with Energy Efficiency Programs  

Energy.gov (U.S. Department of Energy (DOE))

Community Development Finance Institutions- Opportunities for Partnerships with Energy Efficiency Programs

220

Developing an Evaluation Measurement and Verification Plan for Your Energy Efficiency Project/Program  

Energy.gov (U.S. Department of Energy (DOE))

Developing an Evaluation Measurement and Verification Plan for Your Energy Efficiency Project/Program

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation. FY 1993 Program Summary  

SciTech Connect

DOE has set a goal to clean up its complex and to bring all sites into compliance with applicable environmental regulations. This initiative is slated for completion by the year 2019. Four years ago there was no coordinated plan for identifying or cleaning these contaminated sites. Since 1989, DOE`s Office of Environmental Restoration and Waste Management has invested time, money, and manpower to establish a wide range of programs to meet this immense challenge. DOE is responsible for waste management and clean up of more than 100 contaminated installations in 36 states and territories. This includes 3,700 sites: over 26,000 acres, with hazardous or radioactive contaminated surface or groundwater, soil, or structures; over 26,000 acres requiring remediation, with the number growing as new sites are defined; 500 surplus facilities awaiting decontamination and decommissioning and approximately 5,000 peripheral properties (residences, businesses) that have soil contaminated with uranium tailings.

Not Available

1993-10-01T23:59:59.000Z

222

Development of a maintenance effectiveness monitoring program for CANDU reactors  

Science Journals Connector (OSTI)

A procedural program to monitor the effectiveness of maintenance activities was developed for CANDU reactors and, to confirm its applicability, was tested on a CANDU power plant being operated by the Korea Hydro & Nuclear Power Co. The monitoring program is based on a methodology utilizing probabilistic risk information to meet US regulation 10CFR50.65, which is known as the Maintenance Rule. There are many cases in which the Maintenance Rule is applied to Light Water Reactor systems, including \\{PWRs\\} and BWRs. However, it has not been applied to a CANDU Reactor System thus far. In this paper, a procedure to set up a maintenance effectiveness monitoring program is presented with an emphasis on its application to the CANDU system. Relevant solutions to problems that were encountered are introduced to make the program more suitable for the characteristics of CANDU systems. In the end, an application of the program to an operating CANDU power plant is discussed to evaluate the performance status of the plant.

Dong Wook Jerng; Hee Seung Chang; Tae Young Ju

2011-01-01T23:59:59.000Z

223

Fossil Energy Advanced Research and Technology Development Materials Program  

SciTech Connect

Objective of this materials program is to conduct R and D on materials for fossil energy applications with focus on longer-term and generic needs of the various fossil fuel technologies. The projects are organized according to materials research areas: (1) ceramics, (2) new alloys: iron aluminides, advanced austenitics and chromium niobium alloys, and (3) technology development and transfer. Separate abstracts have been prepared.

Cole, N.C.; Judkins, R.R. (comps.)

1992-12-01T23:59:59.000Z

224

MHD magnet technology development program summary, September 1982  

SciTech Connect

The program of MHD magnet technology development conducted for the US Department of Energy by the Massachusetts Institute of Technology during the past five years is summarized. The general strategy is explained, the various parts of the program are described and the results are discussed. Subjects covered include component analysis, research and development aimed at improving the technology base, preparation of reference designs for commercial-scale magnets with associated design evaluations, manufacturability studies and cost estimations, the detail design and procurement of MHD test facility magnets involving transfer of technology to industry, investigations of accessory subsystem characteristics and magnet-flow-train interfacing considerations and the establishment of tentative recommendations for design standards, quality assurance procedures and safety procedures. A systematic approach (framework) developed to aid in the selection of the most suitable commercial-scale magnet designs is presented and the program status as of September 1982 is reported. Recommendations are made for future work needed to complete the design evaluation and selection process and to provide a sound technological base for the detail design and construction of commercial-scale MHD magnets. 85 references.

Not Available

1983-11-01T23:59:59.000Z

225

DISCLAIMER This  

NLE Websites -- All DOE Office Websites (Extended Search)

Of Of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability Or resPnsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately Owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- mendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those

226

DISCLAIMER This  

Office of Scientific and Technical Information (OSTI)

This This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their ern- ployees, makes any warranty, expressedor implied, or assumesany legal liability or responsibility for the accuracy,completeness, or usefulness of any information, apparatus,product, or processdisclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific cornrnercial product, process, or service by trade name, tradernark, manufacturer, or otherwise, does not necessarily constitute or imply its en- ciorsement, recommendation, or favoring by the Unitecl States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of authors expressed herein do not necessarily state

227

DISCLAIMER This  

Office of Scientific and Technical Information (OSTI)

of pressure waves generated in Computer-Controlled Automated Rain a metal when a fracture or failure takes piace. The tester, which is applicable to the Sampler: a compact...

228

DISCLAIMER T  

Office of Scientific and Technical Information (OSTI)

ions. Thus knowledge of the association constants is important in interpreting the thermodynamics of the partitioning of electrolytes to the vapor phase in a fully speciated...

229

DISCLAIMER T  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

T T h i s report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes a n y warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refcr- encc herein to a n y specific commercial product, procws, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- mendation, or favoring by the United States Government or any agency thereof. The views and opinions

230

DISCLAIMER J  

NLE Websites -- All DOE Office Websites (Extended Search)

J J i This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- mendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the

231

NREL: Disclaimer  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Laboratory (NREL) is operated for the U.S. Department of Energy by the Alliance for Sustainable Energy, LLC ("Alliance"). As such the following rules apply:...

232

The MARX Modulator Development Program for the International Linear Collider  

SciTech Connect

The ILC Marx Modulator Development Program at SLAC is working towards developing a full-scale ILC Marx ''Reference Design'' modulator prototype, with the goal of significantly reducing the size and cost of the ILC modulator while improving overall modulator efficiency and availability. The ILC Reference Design prototype will provide a proof-of-concept model to industry in advance of Phase II SBIR funding, and also allow operation of the new 10MW L-Band Klystron prototypes immediately upon their arrival at SLAC.

Leyh, G.E.; /SLAC

2006-06-12T23:59:59.000Z

233

Quality Assurance Program Plan for AGR Fuel Development and Qualification Program  

SciTech Connect

Quality Assurance Plan (QPP) is to document the Idaho National Engineering and Environmental Laboratory (INEEL) Management and Operating (M&O) Contractors quality assurance program for AGR Fuel Development and Qualification activities, which is under the control of the INEEL. The QPP is an integral part of the Gen IV Program Execution Plan (PEP) and establishes the set of management controls for those systems, structures and components (SSCs) and related quality affecting activities, necessary to provide adequate confidence that items will perform satisfactorily in service.

W. Ken Sowder

2004-02-01T23:59:59.000Z

234

[Gas cooled fuel cell systems technology development program  

SciTech Connect

Objective is the development of a gas-cooled phosphoric acid fuel cell for electric utility power plant application. Primary objectives are to: demonstrate performance endurance in 10-cell stacks at 70 psia, 190 C, and 267 mA/cm[sup 2]; improve cell degradation rate to less than 8 mV/1000 hours; develop cost effective criteria, processes, and design configurations for stack components; design multiple stack unit and a single 100 kW fuel cell stack; design a 375 kW fuel cell module and demonstrate average cell beginning-of-use performance; manufacture four 375-kW fuel cell modules and establish characteristics of 1.5 MW pilot power plant. The work is broken into program management, systems engineering, fuel cell development and test, facilities development.

Not Available

1988-03-01T23:59:59.000Z

235

Fuel Cell Technologies Program Multi-Year Research, Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Program Management and Operations The U.S. Department of Energy's (DOE's) Hydrogen and Fuel Cells Program (the Program) is composed of activities within the Offices of Energy...

236

INL/EXT-14-33257 Light Water Reactor Sustainability Program  

NLE Websites -- All DOE Office Websites (Extended Search)

57 Light Water Reactor Sustainability Program 3D J-Integral Capability in Grizzly September 2014 DOE Office of Nuclear Energy DISCLAIMER This information was prepared as an account...

237

Laboratory Directed Research and Development Program FY 2010  

E-Print Network (OSTI)

element nuclear physics research program. Accomplishmentsand Nuclear Security (unclassified fundamental research that supports stockpile safety and nonproliferation programs).

Hansen, Todd

2011-01-01T23:59:59.000Z

238

Laboratory Directed Research and Development Program FY2011  

E-Print Network (OSTI)

element nuclear physics research program. Accomplishmentsand Nuclear Security (unclassified fundamental research that supports stockpile safety and nonproliferation programs).

ed, Todd Hansen

2013-01-01T23:59:59.000Z

239

Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs-Summary Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 41 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs-Summary Report LR O'Neil TJ Vanderhorst, Jr MJ Assante J Januszewski, III DH Tobey R Leo TJ Conway K Perman July 2013 PNNL- 22641 Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs-Summary Report LR O'Neil TJ Vanderhorst, Jr MJ Assante J Januszewski, III DH Tobey R Leo TJ Conway K Perman Contributors: SGC Panel Members July, 2013 Prepared by: Pacific Northwest National Laboratory and NBISE Secure Power Systems Professional Project Team This document is a summarization of the report, Developing Secure Power Systems

240

U.S. Department of Housing and Urban Development PROGRAMS OF HUD  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Housing and Urban Development Housing and Urban Development PROGRAMS OF HUD Major Mortgage, Grant, Assistance, and Regulatory Programs 2013 ii Table of Contents Table of Contents ................................................................................................................ ii Community Planning and Development ............................................................................ 1 Brownfields Economic Development Initiative (BEDI) ........................................................ 1 Capacity Building for Community Development and Affordable Housing .......................... 2 Community Development Block Grants (Disaster Recovery Assistance) ............................. 3 Community Development Block Grants (CDBG) (Entitlement) ........................................... 4

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan: Technical Plan  

Energy.gov (U.S. Department of Energy (DOE))

The Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan presents the status of geothermal energy technologies and details program plans from 2009 through 2015, with program activities through 2025.

242

Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan: Table of Contents  

Energy.gov (U.S. Department of Energy (DOE))

The Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan presents the status of geothermal energy technologies and details program plans from 2009 through 2015, with program activities through 2025.

243

Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan  

Energy.gov (U.S. Department of Energy (DOE))

The Geothermal Technologies Program Multi-Year Research, Development and Demonstration Plan presents the status of geothermal energy technologies and details program plans from 2009 through 2015, with program activities through 2025.

244

Moving granular-bed filter development program. Topical report  

SciTech Connect

Advanced, coal-based, power plants, such as IGCC and Advanced-PFBC, are currently nearing commercial demonstration. These power plant technologies require hot gas filtration as part of their gas cleaning trains. Ceramic barrier filters are the major filter candidates being developed for these hot gas cleaning applications. While ceramic barrier filters achieve high levels of particle removal, concerns exist for their reliability and operability in these applications. An alternative hot gas filtration technology is the moving granular bed filter. An advanced, moving granular bed filter has been conceived, and early development activities performed by the Westinghouse Electric Corporation, Science and Technology Center. This document reports on the Base Contract tasks performed to resolve the barrier technical issues for this technology. The concept, the Standleg Moving Granular Bed Filter (SMGBF) has a concurrent downward, gas and bed media flow configuration that results in simplified features and improved scaleup feasibility compared to alternative designs. Two modes of bed media operation were assessed in the program: once-through using pelletized power plant waste as bed media, and recycle of bed media via standleg and pneumatic transport techniques. Cold Model testing; high-temperature, high-pressure testing; and pelletization testing using advanced power plant wastes, have been conducted in the program. A commercial, economic assessment of the SMGBF technology was performed for IGCC and Advanced-PFBC applications. The evaluation shows that the barrier technical issues can be resolved, and that the technology is potentially competitive with ceramic barrier filters.

Newby, R.A.; Yang, W.C.; Smeltzer, E.E.; Lippert, T.E.

1994-04-01T23:59:59.000Z

245

A Low Carbon Development Guide for Local Government Actions in China  

NLE Websites -- All DOE Office Websites (Extended Search)

Low Carbon Development Low Carbon Development Guide for Local Government Actions in China Nan Zhou, Stephanie Ohshita, Lynn Price, Nina Zheng China Energy Group Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Reprint version of journal article published in "Carbon Management", June 2011 June 2012 This work was supported by the China Sustainable Energy Program of the Energy Foundation through the U.S. Department of Energy under Contract No. DE-AC02- 05CH11231. LBNL-5576E Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any

246

The photovoltaic market analysis program : background, model development, applications and extensions  

E-Print Network (OSTI)

The purpose of this report is to describe and motivate the market analysis program for photovoltaics that has developed over the last several years. The main objective of the program is to develop tools and procedures to ...

Lilien, Gary L.

1981-01-01T23:59:59.000Z

247

CLEAN C O A L RESEARCH PROGRAM  

NLE Websites -- All DOE Office Websites (Extended Search)

Pathway for readying the next generation of affordable clean energy technology Pathway for readying the next generation of affordable clean energy technology -Carbon Capture, Utilization, and Storage (CCUS) CLEAN C O A L RESEARCH PROGRAM 2012 TECHNOLOGY READINESS ASSESSMENT DECEMBER 2012 United States Department of Energy | Office of Fossil Energy -ANALYSIS OF ACTIVE RESEARCH PORTFOLIO ii 2012 TECHNOLOGY READINESS ASSESSMENT-CLEAN COAL RESEARCH PROGRAM iii DISCLAIMER DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor

248

Energy Conversion DevicesEnergy Conversion Devices Fuel Cell Electrocatalyst Development Program  

E-Print Network (OSTI)

for several groups of electrocatalysts ECD PEMFC Catalyst Development Evaluation programs exist for severalEnergy Conversion Devices PEMFC Electrocatalyst Development Program Contact information: Dr. Peter Faguy pfaguyEnergy Conversion DevicesEnergy Conversion Devices Fuel Cell Electrocatalyst Development Program

249

Data Availability in Appliance Standards and Labeling Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Availability in Appliance Data Availability in Appliance Standards and Labeling Program Development and Evaluation John Romankiewicz, Nina Khanna, Edward Vine, and Nan Zhou China Energy Group Environmental Energy Technologies Division Lawrence Berkeley National Laboratory May 2013 This work was supported by the China Sustainable Energy Program of the Energy Foundation and Collaborative Labeling and Appliance Standards Program through the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. LBNL-6282E Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any

250

Wind Program Announces $2 Million to Develop and Field Test Wind...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Announces 2 Million to Develop and Field Test Wind Energy Bat Impact Minimization Technologies Wind Program Announces 2 Million to Develop and Field Test Wind Energy Bat Impact...

251

Wind Program Announces $2 Million to Develop and Field Test Wind Energy Bat Impact Minimization Technologies  

Energy.gov (U.S. Department of Energy (DOE))

EERE's Wind Program announced $2 million in funding to advance technologies that address wind developments potential impacts on wildlife.

252

FY2000 Progress Report for the Advanced Technology Development Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Advanced Automotive Technologies 1000 Independence Avenue S.W. Washington, D.C. 20585-0121 FY 2000 Progress Report for the Advanced Technology Development Program Energy Efficiency and Renewable Energy Office of Transportation Technologies Office of Advanced Automotive Technologies Energy Management Team Raymond A. Sutula Energy Management Team Leader December 2000 This document highlights work sponsored by agencies of the U.S. Government. Neither the U.S. Government nor any agency, thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference

253

Bringing Automated Formal Verification to PLC Program Development  

E-Print Network (OSTI)

Automation is the field of engineering that deals with the development of control systems for operating systems such as industrial processes, railways, machinery or aircraft without human intervention. In most of the cases, a failure in these control systems can cause a disaster in terms of economic losses, environmental damages or human losses. For that reason, providing safe, reliable and robust control systems is a first priority goal for control engineers. Ideally, control engineers should be able to guarantee that both software and hardware fulfill the design requirements. This is an enormous challenge in which industry and academia have been working and making progresses in the last decades. This thesis focuses on one particular type of control systems that operates industrial processes, the PLC (Programmable Logic Controller) - based control systems. Moreover it targets one of the main challenges for these systems, guaranteeing that PLC programs are compliant with their specifications. Traditionally ...

Fernndez Adiego, Borja; Blanco Viuela, Enrique

254

Dissimilar-weld failure analysis and development program  

SciTech Connect

As a result of the work performed under RP 1874-1, the factors influencing the performance of dissimilar metal welds (DMWs) in elevated temperature power plant boiler service have been defined. Details of the results are given in other volumes of this report series. In this volume, design and procedure guidelines for improving DMW performance are provided. DMW life can be extended by: locating DMWs such that service conditions are conducive to long life; such locations may be identified by the use of the computerized analytical program PODIS, developed under RP 1874; using preferred weld filler metals; and using specific weld configurations. Details of each of these approaches are described herein. 5 figs., 2 tabs.

Roberts, D.I.; Ryder, R.H.; Grunloh, H.J.; Thurgood, B.E. (General Atomics, San Diego, CA (USA))

1989-11-01T23:59:59.000Z

255

Northwest Energy Efficient Manufactured Housing Program Specification Development  

SciTech Connect

The Hood River Passive Project was developed by Root Design Build of Hood River Oregon using the Passive House Planning Package (PHPP) to meet all of the requirements for certification under the European Passive House standards. The Passive House design approach has been gaining momentum among residential designers for custom homes and BEopt modeling indicates that these designs may actually exceed the goal of the U.S. Department of Energy's (DOE) Building America program to reduce home energy use by 30%-50% (compared to 2009 energy codes for new homes). This report documents the short term test results of the Shift House and compares the results of PHPP and BEopt modeling of the project.

Hewes, T.; Peeks, B.

2013-02-01T23:59:59.000Z

256

Nuclear criticality safety program development using necessary and sufficient standards  

SciTech Connect

The U.S. Department of Energy`s (DOE`s) Necessary and Sufficient Standards Closure Process has been used to develop a new criticality, safety program manual for the Rocky Flats Environmental Technology Site (RFETS). Standards define and communicate the expectations for performance of work. The purpose of the necessary and sufficient standards closure process is to apply standards determined to be necessary and sufficient for protecting the workers, the public, and the environment. This ensures that the applied standards add value to the performance of the activity; work effectiveness is increased. The purpose of this paper is to briefly describe the process and the results for the selection of national criticality safety standards for use at the Rocky Flats facilities.

Croucher, D.W.; Stachowiak, R.V. [Kaiser-Hill Co., LLC, Golden, CO (United States); Wilson, R.E. [Safe Sites of Colorado, Golden, CO (United States)

1996-12-31T23:59:59.000Z

257

Geothermal drilling and completion technology development program. Quarterly progress report, April-June 1980  

SciTech Connect

The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are reported. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

Varnado, S.G.

1980-07-01T23:59:59.000Z

258

Geothermal drilling and completion technology development program. Quarterly progress report, October-December 1979  

SciTech Connect

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.

Varnado, S.G. (ed.)

1980-01-01T23:59:59.000Z

259

Developing standards for undergraduate university construction education internship programs  

E-Print Network (OSTI)

The following terms were defined to clarify their proper interpretation within the context of the present study: Applied learning programs such as internships and cooperative education programs (co-ops) combine academic learning with supervised practical...

Hager, Cassandrea Jane

2005-08-29T23:59:59.000Z

260

Yucca Mountain Project - Science & Technology Radionuclide Absorbers Development Program Overview  

SciTech Connect

The proposed Yucca Mountain repository is anticipated to be the first facility for long-term disposal of commercial spent nuclear fuel and high-level radioactive waste in the United States. The facility, located in the southern Nevada desert, is currently in the planning stages with initial exploratory excavations completed. It is an underground facility mined into the tuffaceous volcanic rocks that sit above the local water table. The focus of the work described in this paper is the development of radionuclide absorbers or ''getter'' materials for neptunium (Np), iodine (I), and technetium (Tc) for potential deployment in the repository. ''Getter'' materials retard the migration of radionuclides through sorption, reduction, or other chemical and physical processes, thereby slowing or preventing the release and transport of radionuclides. An overview of the objectives and approaches utilized in this work with respect to materials selection and modeling of ion ''getters'' is presented. The benefits of the ''getter'' development program to the United States Department of Energy (US DOE) are outlined.

Hong-Nian Jow; R.C. Moore; K.B. Helean; S. Mattigod; M. Hochella; A.R. Felmy; J. Liu; K. Rosso; G. Fryxell; J. Krumhansl; Y. Wang

2005-01-14T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

EM's Development Program for New Managers/Supervisors | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Series (Leadership Seminars) Leading EDGE- Executives Driving Government Excellence Fundamentals of Program Management Changing Dimension in DOE Communication Matters Five...

262

The Russian Federation's Ministry of Atomic Energy: Programs and Developments  

SciTech Connect

This paper reviews select programs driving the Ministry of Atomic Energy of the Russian Federation's (Minatom) efforts to raise funds, comments on their potential viability, and highlights areas likely to be of particular concern for the US over the next three to five years. The paper's findings are: (1) Despite numerous cabinet displacements throughout the Yeltsin administration, Yevgeny Adamov was reappointed Minister on four occasions. With Boris Yeltsin's January 1, 2000 resignation, Adamov's long-term position as the head of the Ministry is more tenuous, but he will likely retain his position until at least the March 2000 elections. Acting President Vladimir Putin is unlikely to reorganize his cabinet prior to that date and there are no signs that Putin is dissatisfied with Adamov's leadership of Minatom. (2) Adamov's chief priorities are downsizing Minatom's defense sector, increasing the oversight of subsidiary bodies by the central bureaucracy and consolidating commercial elements of the Ministry within an umbrella organization called Atomprom. (3) Viktor Mikhaylov, Adamov's predecessor and critic of his reform efforts, has been relieved of his duties as First Deputy Minister. While he retains his positions as Chief of the Science Councils and Chief Scientist at Arzamas-16, his influence on Minatom's direction is greatly diminished. Adamov will likely continue his efforts to further marginalize Mikhaylov in the coming year. (4) Securing extra-budgetary sources of income continues to be the major factor guiding Minatom's international business dealings. The Ministry will continue to aggressively promote the sale of nuclear technology abroad, often to countries with questionable nonproliferation commitments. (5) Given the financial difficulties in Russia and Minatom's client states, however, few nuclear development programs will come to fruition for a number of years, if ever. Nevertheless, certain peaceful nuclear cooperation agreements should be carefully monitored--particularly those negotiated with Cuba, Iran, Libya and Syria. (6) Waste management has also risen in importance for Minatom. Opportunities for raising funds by reprocessing, storing and permanently disposing of spent fuel from foreign states are being explored. Although currently prohibited by federal law, the Russian Parliament will likely pass legislation in support of this program.

CM Johnson

2000-07-24T23:59:59.000Z

263

Geothermal Drilling and Completion Technology Development Program. Quarterly progress report, October 1980-December 1980  

SciTech Connect

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development.

Kelsey, J.R. (ed.)

1981-03-01T23:59:59.000Z

264

Chemistry {ampersand} Materials Science program report, Weapons Resarch and Development and Laboratory Directed Research and Development FY96  

SciTech Connect

This report is the annual progress report for the Chemistry Materials Science Program: Weapons Research and Development and Laboratory Directed Research and Development. Twenty-one projects are described separately by their principal investigators.

Chase, L.

1997-03-01T23:59:59.000Z

265

Superconducting multicell cavity development program at Los Alamos  

SciTech Connect

The superconducting rf (SCRF) cavity Development Program at Los Alamos has designed, fabricated, and tested single-cell niobium cavities at 3-GHz and 805-MHz. This work is being done in preparation for procuring and testing a multicell niobium cavity. The multicell cavity is designed to accelerate protons at [beta] = 0.9; initial tests will be without beam. Progammmatic changes have required us to modify our plans to install a 6800-liter helium cryostat and a 12.8-g/s helium pump. We will use an installed cryostat to test the multicell cavity. Also, the cavity will be modified from a seven-cell to a four-cell structure to match the dimensions of the installed cryostat. Previous reports concentrated on 3-GHz results. In this paper, some of the latest results of the 805-MHz cavity tests are presented. Modifications to allow high pulsed power (HPP) testing on 805-MHz single- and four-cell cavities are proceeding. Glow discharge cleaning of an 805-MHz niobium cavity resulted in a decrease in cavity performance. The cavity was restored to previous performance levels with buffered chemical polishing (bcp). Initial results with high-pressure water cleaning show the process is useful in restoring cavity performance.

Rusnak, B.; Spalek, G.: Gray, E.; DiMarco, J.N.; DeHaven, R.; Novak, J.; Walstrom, P.; Zumbro, J.; Thiessen, H.A. (Los Alamos National Lab., NM (United States)); Langenbrunner, J. (Minnesota Univ., Minneapolis, MN (United States))

1993-01-01T23:59:59.000Z

266

Superconducting multicell cavity development program at Los Alamos  

SciTech Connect

The superconducting rf (SCRF) cavity Development Program at Los Alamos has designed, fabricated, and tested single-cell niobium cavities at 3-GHz and 805-MHz. This work is being done in preparation for procuring and testing a multicell niobium cavity. The multicell cavity is designed to accelerate protons at {beta} = 0.9; initial tests will be without beam. Progammmatic changes have required us to modify our plans to install a 6800-liter helium cryostat and a 12.8-g/s helium pump. We will use an installed cryostat to test the multicell cavity. Also, the cavity will be modified from a seven-cell to a four-cell structure to match the dimensions of the installed cryostat. Previous reports concentrated on 3-GHz results. In this paper, some of the latest results of the 805-MHz cavity tests are presented. Modifications to allow high pulsed power (HPP) testing on 805-MHz single- and four-cell cavities are proceeding. Glow discharge cleaning of an 805-MHz niobium cavity resulted in a decrease in cavity performance. The cavity was restored to previous performance levels with buffered chemical polishing (bcp). Initial results with high-pressure water cleaning show the process is useful in restoring cavity performance.

Rusnak, B.; Spalek, G.: Gray, E.; DiMarco, J.N.; DeHaven, R.; Novak, J.; Walstrom, P.; Zumbro, J.; Thiessen, H.A. [Los Alamos National Lab., NM (United States); Langenbrunner, J. [Minnesota Univ., Minneapolis, MN (United States)

1993-06-01T23:59:59.000Z

267

Papua New Guinea-Low Emissions Asian Development (LEAD) Program | Open  

Open Energy Info (EERE)

Papua New Guinea-Low Emissions Asian Development (LEAD) Program Papua New Guinea-Low Emissions Asian Development (LEAD) Program Jump to: navigation, search Name Papua New Guinea-Low Emissions Asian Development (LEAD) Program Agency/Company /Organization ICF International, United States Agency for International Development (USAID) Partner USFS, EPA, United States Department of State Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, -LEDS Website http://www.LowEmissionsAsia.or Country Papua New Guinea Melanesia References USAID LEAD Program[1] The Low Emissions Asian Development (LEAD) program is a regional US Agency for International Development (USAID) activity that supports developing countries in Asia to achieve long-term, transformative development and accelerate sustainable, climate-resilient economic growth while slowing the

268

Geothermal Drilling and Completion Technology Development Program. Quarterly progress report, January 1981-March 1981  

SciTech Connect

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods as they apply to advanced drilling systems.

Kelsey, J.R. (ed.)

1981-06-01T23:59:59.000Z

269

FUTURE HYDROELECTRIC DEVELOPMENT SECTION 12 FISH AND WILDLIFE PROGRAM 12-1 September 13, 1995  

E-Print Network (OSTI)

FUTURE HYDROELECTRIC DEVELOPMENT SECTION 12 FISH AND WILDLIFE PROGRAM 12-1 September 13, 1995 Section 12 FUTURE HYDROELECTRIC DEVELOPMENT Much of this program has focused on mitigating damage done for additional federal hydroelectric projects and to plan for new development in the basin. The Federal Energy

270

Federal Aviation Administration's Airport Capital Improvement Program Development Process  

E-Print Network (OSTI)

The Airport Capital Improvement Program (ACIP) serves as the primary tool for project planning and formulation by the Federal Aviation Administration (FAA). The FAA relies on the ACIP to serve as the basis for the distribution of Aviation Trust...

Tener, Scott D.

2009-12-18T23:59:59.000Z

271

California Enterprise Development Authority- Statewide PACE Program (California)  

Energy.gov (U.S. Department of Energy (DOE))

FIGTREE Energy Financing is administering a Property Assessed Clean Energy (PACE) financing program in a number of California cities and counties through a partnership with the Pacific Housing &...

272

NREL: Workforce Development and Education Programs - U.S. Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. Department of Energy Wind Program Announces New Round of Funding for 2016 Collegiate Wind Competition October 30, 2014 The U.S. Department of Energy's (DOE's) National...

273

Building technological capability within satellite programs in developing countries  

E-Print Network (OSTI)

Global participation in space activity is growing as satellite technology matures and spreads. Countries in Africa, Asia and Latin America are creating or reinvigorating national satellite programs. These countries are ...

Wood, Danielle Renee

2012-01-01T23:59:59.000Z

274

To continue the development of WISER's globally recognized program in Clean Coal Technology at Illinois  

E-Print Network (OSTI)

Vision To continue the development of WISER's globally recognized program in Clean Coal Technology renewable energy. Goal The goals of the WISER Clean Coal Technology Program are to: · Obtain the optimum stream Strengths The strengths of the WISER Clean Coal Technology program include a strong

Heller, Barbara

275

Director's Discretionary Research and Development Program: Annual Report, Fiscal Year 2006  

SciTech Connect

The Director's Discretionary Research and Development Program, Annual Report Fiscal Year 2006 is an annual management report that summarizes research projects funded by the DDRD program. The NREL DDRD program comprises projects that strengthen NREL's four technical competencies: Integrated Systems, Renewable Electricity, Renewable Fuels, and Strategic Analysis.

Not Available

2007-03-01T23:59:59.000Z

276

Fuel Cell Technologies Program Multi-Year Research, Development...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

deployment of hydrogen and fuel cell technologies. o Facilitate development of safe, high-performance materials for hydrogen service. o Develop appropriate test methodologies for...

277

Nuclear Safety Research and Development (NSR&D) Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Safety » Nuclear Safety Research and Nuclear Safety » Nuclear Safety Research and Development (NSR&D) Program Nuclear Safety Research and Development (NSR&D) Program In 2011, the Office of Health, Safety and Security (HSS) created the Nuclear Safety Research and Development (NSR&D) Program within the Office of Nuclear Safety to provide corporate-level leadership supporting nuclear safety research and development throughout the Department of Energy (DOE). The NSR&D Program solicits input from the Nuclear Safety Council which includes membership of senior management from each program office. NSR&D Program Objectives: To establish an enduring Departmental commitment and capability to utilize NSR&D in preventing and reducing the hazards and risks posed by DOE/NNSA nuclear facilities;

278

Programmed cell death may act as a surveillance mechanism to safeguard male gametophyte development in Arabidopsis  

Science Journals Connector (OSTI)

Programmed cell death (PCD) plays an important role in plant growth and development as well as in stress responses. During male gametophyte development, it has been proposed that PCD may act as a cellular surv...

Jian Zhang; Chong Teng; Yan Liang

2011-10-01T23:59:59.000Z

279

The Russian Federation's Ministry of Atomic Energy: Programs and Developments  

SciTech Connect

The Ministry of Atomic Energy of the Russian Federation (Minatom) is one of Russia's largest and most influential federal bodies. Throughout 1999 its head, Yevgeny Adamov, has worked to increase the Ministry's commercial competitiveness by consolidating redundant facilities and tightening control over subsidiary organizations. Economic difficulties and budget constraints, however, have hindered Minatom's ability to achieve many of its programs and goals. As a result, the Ministry has continued, renewed or initiated contracts with several countries possessing questionable commitments to nonproliferation and has sought to expand its role in international nuclear waste management and spent fuel reprocessing in order to raise new sources of revenue. While many of these programs are not likely to come to fruition, others raise significant nonproliferation and environmental concerns. This paper reviews select programs driving Minatom's efforts to raise funds, comments on their potential viability, and highlights areas likely to be of particular concern for the United States over the next three to five years.

Johnson, Craig M.

2000-07-24T23:59:59.000Z

280

Laboratory Directed Research and Development Program FY 2006  

E-Print Network (OSTI)

organic- inorganic heterojunction photovoltaic solar cellsolar cell devices. We will develop virus-based organic-

Hansen Ed., Todd

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Geothermal Technology Development Program. Annual progress report, October 1983-September 1984  

SciTech Connect

This report describes the status of ongoing Research and Development (R and D) within the Geothermal Technology Development Program. The work reported is sponsored by the Department of Energy/Geothermal Hydropower Technology Division (DOE/GHTD), with program management provided by Sandia National Laboratories. The program emphasizes research in rock penetration mechanics, fluid technology, borehole mechanics, diagnostics technology, and permeability enhancement. 102 figs., 16 tabs.

Kelsey, J.R. (ed.)

1985-08-01T23:59:59.000Z

282

ADVANCED SORBENT DEVELOPMENT PROGRAM; DEVELOPMENT OF SORBENTS FOR MOVING-BED AND FLUIDIZED-BED APPLICATIONS  

SciTech Connect

The integrated gasification combined cycle (IGCC) power system using high-temperature coal gas cleanup is one of the most promising advanced technologies for the production of electric power from coal in an environmentally acceptable manner. Unlike conventional low-temperature cleanup systems that require costly heat exchangers, high-temperature coal gas cleanup systems can be operated near 482-538 C (900-1000F) or higher, conditions that are a closer match with the gasifier and turbine components in the IGCC system, thus resulting is a more efficient overall system. GE is developing a moving-bed, high-temperature desulfurization system for the IGCC power cycle in which zinc-based regenerable sorbents are currently being used as desulfurization sorbents. Zinc titanate and other proprietary zinc-based oxides are being considered as sorbents for use in the Clean Coal Technology Demonstration Program at Tampa Electric Co.?s (TECo) Polk Power Station. Under cold startup conditions at TECo, desulfurization and regeneration may be carried out at temperatures as low as 343 C (650 F), hence a versatile sorbent is desirable to perform over this wide temperature range. A key to success in the development of high-temperature desulfurization systems is the matching of sorbent properties for the selected process operating conditions, namely, sustainable desulfurization kinetics, high sulfur capacity, and mechanical durability over multiple cycles. Additionally, the sulfur species produced during regeneration of the sorbent must be in a form compatible with sulfur recovery systems, such as sulfuric acid or elemental sulfur processes. The overall objective of this program is to develop regenerable sorbents for hydrogen sulfide removal from coal-derived fuel gases in the temperature range 343-538 C (650-1000 F). Two categories of reactor configurations are being considered: moving-bed reactors and fluidized-bed (bubbling and circulating) reactors. In addition, a cost assessment and a market plan for large-scale fabrication of sorbents were developed. As an optional task, long-term bench-scale tests of the best moving-bed sorbents were conducted. Starting from thermodynamic calculations, several metal oxides were identified for potential use as hot gas cleanup sorbents using constructed phase stability diagrams and laboratory screening of various mixed-metal oxide formulations. Modified zinc titanates and other proprietary metal oxide formulations were evaluated at the bench scale and many of them found to be acceptable for operation in the target desulfurization temperature range of 370 C (700 F) to 538 C (1000 F) and regeneration tempera-tures up to 760 C (1400 F). Further work is still needed to reduce the batch-to-batch repeatability in the fabrication of modified zinc titanates for larger scale applications. The information presented in this Volume 1 report contains the results of moving-bed sorbent develop-ment at General Electric?s Corporate Research and Development (GE-CRD). A separate Volume 2 report contains the results of the subcontract on fluidized-bed sorbent development at the Institute of Gas Technology (IGT).

R.E. AYALA; V.S. VENKATARAMANI

1998-09-30T23:59:59.000Z

283

Laboratory Directed Research and Development Program, FY 1995  

SciTech Connect

This program provides the resources for Berkeley Lab scientists to make rapid and significant contributions to critical nation science and technology problems: accelerators and fusion, chemical sciences, earth sciences, energy and environment, engineering, life sciences, materials, nuclear science, physics, and structural biology (hyperthermophilic microorganisms).

NONE

1995-12-31T23:59:59.000Z

284

Work with Apple's Rhapsody Operating System which Allows Simultaneous UNIX Program Development, UNIX Program Execution, and PC Application Execution  

E-Print Network (OSTI)

Over the past decade, UNIX workstations have provided a very powerful program development environment. However, workstations are more expensive than PCs and Macintoshes and require a system manager for day-to-day tasks such as disk backup, adding users, and setting up print queues. Native commercial software for system maintenance and "PC applications" has been lacking under UNIX. Apple's new Rhapsody operating system puts the current MacOS on a NeXT UNIX foundation and adds an enhanced NeXTSTEP object oriented development environment called Yellow Box. Rhapsody simultaneously runs UNIX and commercial Macintosh applications such as word processing or spreadsheets. Thus a UNIX detector Monte Carlo can run for days in the background at the same time as a commercial word processing program. And commercial programs such as Dantz Retrospect are being made available to make disk backup easy under Rhapsody. Apple has announced that in 1999 they intend to be running Rhapsody, or MacOS X as it will be called in the commercial release, on all their newer computers. MacOS X may be of interest to those who have trouble hiring expert UNIX system managers; and to those who would prefer to have a single computer and operating system on their desktop that serves both the needs of UNIX program development and running commercial applications, simultaneously. We present our experiences running UNIX programs and Macintosh applications under the Rhapsody DR2 Developer Release.

Don Summers; Chris Riley; Lucien Cremaldi; David Sanders

2004-12-06T23:59:59.000Z

285

ADVANCED SORBENT DEVELOPMENT PROGRAM DEVELOPMENT OF SORBENTS FOR MOVING-BED AND FLUIDIZED-BED APPLICATIONS  

SciTech Connect

The integrated gasification combined cycle (IGCC) power system using high-temperature coal gas cleanup is one of the most promising advanced technologies for the production of electric power from coal in an environmentally acceptable manner. Unlike conventional low-temperature cleanup systems that require costly heat exchangers, high-temperature coal gas cleanup systems can be operated near 482-538 C (900-1000 F) or higher, conditions that are a closer match with the gasifier and turbine components in the IGCC system, thus resulting is a more efficient overall system. GE is developing a moving-bed, high-temperature desulfurization system for the IGCC power cycle in which zinc-based regenerable sorbents are currently being used as desulfurization sorbents. Zinc titanate and other proprietary zinc-based oxides are being considered as sorbents for use in the Clean Coal Technology Demonstration Program at Tampa Electric Co.'s (TECo) Polk Power Station. Under cold startup conditions at TECo, desulfurization and regeneration may be carried out at temperatures as low as 343 C (650 F), hence a versatile sorbent is desirable to perform over this wide temperature range. A key to success in the development of high-temperature desulfurization systems is the matching of sorbent properties for the selected process operating conditions, namely, sustainable desulfurization kinetics, high sulfur capacity, and mechanical durability over multiple cycles. Additionally, the sulfur species produced during regeneration of the sorbent must be in a form compatible with sulfur recovery systems, such as sulfuric acid or elemental sulfur processes. The overall objective of this program is to develop regenerable sorbents for hydrogen sulfide removal from coal-derived fuel gases in the temperature range 343-538 C (650-1000 F). Two categories of reactor configurations are being considered: moving-bed reactors and fluidized-bed (bubbling and circulating) reactors. In addition, a cost assessment and a market plan for large-scale fabrication of sorbents were developed. As an optional task, long-term bench-scale tests of the best moving-bed sorbents were conducted. Starting from thermodynamic calculations, several metal oxides were identified for potential use as hot gas cleanup sorbents using constructed phase stability diagrams and laboratory screening of various mixed-metal oxide formulations. Modified zinc titanates and other proprietary metal oxide formulations were evaluated at the bench scale and many of them found to be acceptable for operation in the target desulfurization temperature range of 370 C (700 F) to 538 C (1000 F) and regeneration temperatures up to 760 C (1400 F). Further work is still needed to reduce the batch-to-batch repeatability in the fabrication of modified zinc titanates for larger scale applications. The information presented in this Volume 1 report contains the results of moving-bed sorbent development at General Electric's Corporate Research and Development (GE-CRD). A separate Volume 2 report contains the results of the subcontract on fluidized-bed sorbent development at the Institute of Gas Technology (IGT).

R.E Ayala; V.S. Venkataramani; Javad Abbasian; Rachid B. Slimane; Brett E. Williams; Minoo K. Zarnegar; James R. Wangerow; Andy H. Hill

2000-03-31T23:59:59.000Z

286

ORNLs Laboratory Directed Research and Development Program FY 2013 Annual Report  

SciTech Connect

The Laboratory Directed Research and Development (LDRD) program at Oak Ridge National Laboratory (ORNL) reports its status to the US Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2B, Laboratory Directed Research and Development (April 19, 2006), which establishes DOEs requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report includes summaries of all ORNL LDRD research activities supported during FY 2013. The associated FY 2013 ORNL LDRD Self-Assessment (ORNL/PPA-2014/2) provides financial data and an internal evaluation of the programs management process.

NA, NA [ORNL

2014-03-01T23:59:59.000Z

287

ORNLs Laboratory Directed Research and Development Program FY 2010 Annual Report  

SciTech Connect

The Laboratory Directed Research and Development (LDRD) program at Oak Ridge National Laboratory (ORNL) reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2B, Laboratory Directed Research and Development (April 19, 2006), which establishes DOEs requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report includes summaries of all ORNL LDRD research activities supported during FY 2010. The associated FY 2010 ORNL LDRD Self-Assessment (ORNL/PPA-2011/2) provides financial data and an internal evaluation of the programs management process.

NA, NA [ORNL

2011-03-01T23:59:59.000Z

288

ORNLs Laboratory Directed Research and Development Program FY 2011 Annual Report  

SciTech Connect

The Laboratory Directed Research and Development (LDRD) program at Oak Ridge National Laboratory (ORNL) reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2B, Laboratory Directed Research and Development (April 19, 2006), which establishes DOEs requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report includes summaries of all ORNL LDRD research activities supported during FY 2011. The associated FY 2011 ORNL LDRD Self-Assessment (ORNL/PPA-2012/2) provides financial data and an internal evaluation of the programs management process.

NA, NA [ORNL

2012-03-01T23:59:59.000Z

289

ORNLs Laboratory Directed Research and Development Program FY 2009 Annual Report  

SciTech Connect

The Laboratory Directed Research and Development (LDRD) program at Oak Ridge National Laboratory (ORNL) reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2B, Laboratory Directed Research and Development (April 19, 2006), which establishes DOEs requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report includes summaries all ORNL LDRD research activities supported during FY 2009. The associated FY 2009 ORNL LDRD Self-Assessment (ORNL/PPA-2010/2) provides financial data and an internal evaluation of the programs management process.

NA, NA [ORNL

2010-03-01T23:59:59.000Z

290

ORNLs Laboratory Directed Research and Development Program FY 2012 Annual Report  

SciTech Connect

The Laboratory Directed Research and Development (LDRD) program at Oak Ridge National Laboratory (ORNL) reports its status to the US Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2B, Laboratory Directed Research and Development (April 19, 2006), which establishes DOEs requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report includes summaries of all ORNL LDRD research activities supported during FY 2012. The associated FY 2012 ORNL LDRD Self-Assessment (ORNL/PPA-2012/2) provides financial data and an internal evaluation of the programs management process.

NA, NA [ORNL

2013-03-01T23:59:59.000Z

291

Laboratory Directed Research and Development Program FY 2007  

E-Print Network (OSTI)

organic-inorganic hetero junction photovoltaic solar cellsolar cell devices. We will develop virus-based organic-

editor, Todd C Hansen,

2008-01-01T23:59:59.000Z

292

Laboratory Directed Research and Development Program FY 2008 Annual Report  

E-Print Network (OSTI)

organic-inorganic hetero junction photovoltaic solar cellsolar cell devices. We will develop virus-based organic-

editor, Todd C Hansen

2009-01-01T23:59:59.000Z

293

Overview of the Defense Programs Research and Technology Development Program for Fiscal Year 1993  

SciTech Connect

This documents presents a programmatic overview and program element plan summaries for conceptual design and assessment; physics; computation and modeling; system engineering science and technology; electronics, photonics, sensors, and mechanical components; chemistry and materials; special nuclear materials, tritium, and explosives.

Not Available

1993-09-30T23:59:59.000Z

294

Advanced turbine systems program conceptual design and product development. Quarterly report, August--October 1995  

SciTech Connect

This report describes the tasks completed for the advanced turbine systems program. The topics of the report include last row turbine blade development, single crystal blade casting development, ceramic materials development, combustion cylinder flow mapping, shroud film cooling, directional solidified valve development, shrouded blade cooling, closed-loop steam cooling, active tip clearance control, flow visualization tests, combustion noise investigation, TBC field testing, catalytic combustion development, optical diagnostics probe development, serpentine channel cooling tests, brush seal development, high efficiency compressor design, advanced air sealing development, advanced coating development, single crystal blade development, Ni-based disc forging development, and steam cooling effects on materials.

NONE

1996-01-01T23:59:59.000Z

295

Program planner's guide to geothermal development in California  

SciTech Connect

The resource base, status of geothermal development activities, and the state's energy flow are summarized. The present and projected geothermal share of the energy market is discussed. The public and private sector initiatives supporting geothermal development in California are described. These include legislation to provide economic incentives, streamline regulation, and provide planning assistance to local communities. Private sector investment, research, and development activities are also described. The appendices provide a ready reference of financial incentives. (MHR)

Yen, W.W.S.; Chambers, D.M.; Elliott, J.F.; Whittier, J.P.; Schnoor, J.J.; Blachman, S.

1980-09-30T23:59:59.000Z

296

Laboratory Directed Research and Development Program FY2011  

E-Print Network (OSTI)

Transfer in Rooms in the Modelica Buildings library, inRecent Developments of the Modelica Buildings Library forin the 8th International Modelica Conference. Dresden,

ed, Todd Hansen

2013-01-01T23:59:59.000Z

297

Laboratory Directed Research and Development Program FY 2008 Annual Report  

E-Print Network (OSTI)

was developed using the Modelica system simulation language.object-oriented language Modelica. The component models areSystems M. Wetter; "Modelica-based Modeling and Simulation

editor, Todd C Hansen

2009-01-01T23:59:59.000Z

298

Laboratory Directed Research and Development Program FY 2010  

E-Print Network (OSTI)

Recent Developments of the Modelica Buildings Library fordraft submitted to 2010 Modelica Conference. Y. Yang, A .prototyping, we will use the Modelica language, which is an

Hansen, Todd

2011-01-01T23:59:59.000Z

299

Laboratory Directed Research and Development Program FY2011  

E-Print Network (OSTI)

junction solar cells and electrochromic windows. Follow-upof a new dynamic electrochromic coating we have developed.such films in an electrochromic half cell, we have

ed, Todd Hansen

2013-01-01T23:59:59.000Z

300

Automotive Stirling Engine Development Program. Quarterly technical progress report for period June 29-October 3, 1980  

SciTech Connect

Current information on component and subsystems development activities and engine and vehicle testing during July to October 1980 in the Automotive Stirling Engine Development Program is reported. Computer code development progress is also covered. The status of the manufacture of the Mod I is given in some detail. Program engine operating hours through the end of this quarterly period reach a total of 6181 h.

Not Available

1980-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

DSM Program Development. The demand-side resource options were developed using a combination of internal engineering estimates and external consulting services. The  

E-Print Network (OSTI)

DSM Program Development. The demand-side resource options were developed using a combination analysis. Screening Criteria. The DSM screening criteria were designed to assess a program's potential taken into consideration when looking at selecting DSM programs. · Programs will be cost-effective. From

302

The Los Alamos nuclear safeguards and nonproliferation technology development program  

SciTech Connect

For nearly three decades, Los Alamos National Laboratory has developed and implemented nuclear measurement technology and training in support of national and international nuclear safeguards. This paper outlines the major elements of those technologies and highlights some of the latest developments.

Smith, H.A. Jr.; Menlove, H.O.; Reilly, T.D.; Bosler, G.E.; Hakkila, E.A.; Eccleston, G.W.

1994-04-01T23:59:59.000Z

303

Flight Projects 2 Technology and Space Program Development 13  

E-Print Network (OSTI)

, notably in support of solar-electric technology development and aspects of enhanced coal utilization and electric and hybrid automobile development. In the photovoltaics area of solar-electric technology, we are steadily approaching the goal of providing solar cell arrays at a cost com- petitive with other energy

Waliser, Duane E.

304

US RERTR Program, its fuel development activities, and application in the KUHFR  

SciTech Connect

The goals, structure, and accomplishments to date of the Reduced-Enrichment Research and Test Reactor (RERTR) Program are described in detail. Plans and schedules for future program activities are outlined with the effect these activities may potentially have on the research reactor community. The fuel development activities of the program are discussed in detail, with particular emphasis on the new low-enrichment, high uranium density fuels the RERTR Program is developing for application in research reactors in the near future. The results of a joint study program between the RERTR Program and the Kyoto University Research Reactor Institute (KURRI), aimed at converting the Kyoto University High-Flux reactor (KUHFR) to the use of reduced-enrichment uranium, are presented.

Travelli, A. (Argonne National Lab., IL); Stahl, D.; Shibata, T.

1981-01-01T23:59:59.000Z

305

US RERTR program, its fuel-development activities, and application in the KUHFR  

SciTech Connect

The goals, structure, and accomplishments to date of the Reduced Enrichment Research and Test Reactor (RERTR) Program are described in detail. Plans and schedules for future program activities are outlined with the effect which these activities may potentially have on the research-reactor community. The fuel-development activities of the program are discussed in detail, with particular emphasis on the new low-enrichment, high-uranium-density fuels which the RERTR Program is developing for application in research reactors in the near future. The results of a joint study program between the RERTR Program and the Kyoto University Research Reactor Institute (KURRI), aimed at converting the Kyoto University High-Flux Reactor (KUHFR) to the use of reduced-enrichment uranium, are presented. It is shown that the study has resulted in a positive decision and in a cooperative, well-structured plan for the KUHFR conversion.

Travelli, A.; Stahl, D.

1981-01-01T23:59:59.000Z

306

Maximizing the Benefit from the D&D Technology Development Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Maximizing the Benefit from the D&D Technology Development Program Maximizing the Benefit from the D&D Technology Development Program Maximizing the Benefit from the D&D Technology Development Program The Office of Deactivation and Decommissioning (D&D)/Facility Engineering (FE) is charged with reducing the technical risk and uncertainty of D&D activities across the Environmental Management (EM) Complex through the identification, development and demonstration of alternative technologies as well as through the provision of technical assistance activities such as Lessons Learned Workshops and External Technical Review Teams. Maximizing the Benefit from the D&D Technology Development Program More Documents & Publications Across the Pond Newsletter Issue 1 D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot

307

Federal Energy Management Program: Develop an Institutional Change Action  

NLE Websites -- All DOE Office Websites (Extended Search)

Develop an Institutional Change Action Plan for Sustainability Develop an Institutional Change Action Plan for Sustainability Graphic showing 5 gears. They progress from Determine Goal to Identify Context-Rules, Roles and Tools to Develop Action Plan to Implement Plan to Measure and Evaluate. Institutional Change Continuous Improvement Cycle After establishing a goal and assessing the rules, roles, and tools, Federal agencies can develop an action plan (select the strategies that will be implemented over time to achieve and maintain energy and sustainability goals). This action plan should target specific audiences with tailored strategies and take into account the need to review and revise strategies in the long-term. The action plan must include appropriate metrics and regular measurement. Remember that planning useful efficiency and sustainability evaluation is necessary before an organization begins to implement an action plan.

308

The Effectiveness of Leadership Development Programs on Small Farm Producers  

E-Print Network (OSTI)

Farmer Agricultural Leadership Institute was created to address the concerns of small farmers in rural communities. This research specifically targeted the effectiveness of leadership development over a period by exploring the factors that motivate...

Malone, Allen A.

2011-10-21T23:59:59.000Z

309

Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995  

SciTech Connect

Objective of the ATS program is to develop ultra-high efficiency, environmentally superior, and cost-competitive gas turbine systems for base-load application in utility, independent power producer, and industrial markets. This report discusses the major accomplishments achieved during the second year of the ATS Phase 2 program, particularly the design and test of critical components.

NONE

1994-10-01T23:59:59.000Z

310

Automotive Stirling Engine Development Program. Technical progress report for period January 1-March 29, 1980  

SciTech Connect

The activities performed on the Stirling Reference Engine System Design; components and subsystems; P-40 baseline Stirling engine installation and test; the first automotive engine to be built on the program; computer development activities; and technical assistance to the Government are summarized. The overall program philosophy is outlined, and data and results are given.

Not Available

1980-06-01T23:59:59.000Z

311

IFE Chamber Technology Testing Program In NIF and Chamber Development Test Plan Mohamed A. Abdou  

E-Print Network (OSTI)

. As ITER serves as a fusion testing facility for magnetic fusion energy (MFE) nuclear technology componentIFE Chamber Technology Testing Program In NIF and Chamber Development Test Plan Mohamed A. Abdou chamber technology testing program in NIF involoving: criteria for evaluation

Abdou, Mohamed

312

Strategic Environmental Research and Development Program: Atmospheric Remote Sensing and Assessment Program -- Final Report. Part 1: The lower atmosphere  

SciTech Connect

This report documents work done between FY91 and FY95 for the lower atmospheric portion of the joint Department of Defense (DoD) and Department of Energy (DOE) Atmospheric Remote Sensing and Assessment Program (ARSAP) within the Strategic Environmental Research and Development Program (SERDP). The work focused on (1) developing new measurement capabilities and (2) measuring atmospheric heating in a well-defined layer and then relating it to cloud properties an water vapor content. Seven new instruments were develop3ed for use with Unmanned Aerospace Vehicles (UAVs) as the host platform for flux, radiance, cloud, and water vapor measurements. Four major field campaigns were undertaken to use these new as well as existing instruments to make critically needed atmospheric measurements. Scientific results include the profiling of clear sky fluxes from near surface to 14 km and the strong indication of cloudy atmosphere absorption of solar radiation considerably greater than predicted by extant models.

Tooman, T.P. [ed.] [Sandia National Labs., Livermore, CA (United States). Exploratory Systems Technology Dept.

1997-01-01T23:59:59.000Z

313

What Makes Development Sustainable? Case Studies of Health and Human Development Programs in Community Context  

E-Print Network (OSTI)

Is to Be Done? Making Development Sustainable: Redefiningof Institutions. Making Development Sustainable: Rede?ningManagement and Sustainable Development. Ambio 18.2 (1989):

Saha, Somava

1996-01-01T23:59:59.000Z

314

Streak tube photocathode development program. Phase 2, Final technical report  

SciTech Connect

This report details the progress made toward developing a streak tube with greater than 1% quantum efficiency at a wavelength of 1300 nm. The achieved performance is the result of approximately three years of effort. The goal of Phase 2 of this contract was to seal a working 1.3 {mu}m streak tube. This effort was focused in two areas. First there was a continuing effort to further develop and demonstrate the cathodes ability to meet the stated requirements. The second effort was aimed at solving the mechanical and process related problems related to sealing this cathode onto a EG&G streak tube.

Not Available

1993-11-20T23:59:59.000Z

315

Empirical Validation of Test-Driven Pair Programming in Game Development Shaochun Xu  

E-Print Network (OSTI)

competition of software market, and increasing complexities of software. This also happens in game development. In order to solve those problems, agile software development processes, like Scrum, FDD, ExtremeEmpirical Validation of Test-Driven Pair Programming in Game Development Shaochun Xu Department

316

Progress and status of the integral fast reactor (IFR) development program  

SciTech Connect

This paper discusses the Integral Fast Reactor (IFR) development program, in which the entire reactor system - reactor, fuel cycle, and waste process is being developed and optimized at the same time as a single integral entity. Detailed discussions on the present status of the IFR technology development activities in the areas of fuels, pyroprocessing, safety, core design, and fuel cycle demonstration are also presented.

Chang, Y.I. (Argonne National Lab., Argonne, IL (US))

1992-01-01T23:59:59.000Z

317

The Department of Energy Program for Development of Industrial Heat Recovery Equipment  

E-Print Network (OSTI)

The Department of Energy (DOE) in their Industrial Programs Office in Conservation and Solar Applications is involved in development and commercialization of a number of energy conserving techniques. These include high and low temperature processing...

Eustis, J. N.

1979-01-01T23:59:59.000Z

318

INITIATIVE MOBILE APPS DEVELOPMENT Description and details about the program or initiative that is being proposed  

E-Print Network (OSTI)

INITIATIVE ­ MOBILE APPS DEVELOPMENT Description and details about the program or initiative using mobile technologies. Adoption of these technologies will allow UWM to communicate with students university vision? What guiding values are applied? Access: Mobile technologies provide more options

Saldin, Dilano

319

Federal Grant, Loan, and Technical Assistance Programs for Tribal Energy Development  

Energy.gov (U.S. Department of Energy (DOE))

This online tool developed by the White House Council on Native American Affairs Energy Subgroup provides a centralized repository of information on federal programs available to assist with tribal...

320

The StreamIt development tool : a programming environment for StreamIt  

E-Print Network (OSTI)

StreamIt [28] is a high-level programming language intended for the development of large-scale and high-performance streaming applications that are characterized by the processing of data streams by modular structures. The ...

Kuo, Kimberly Sue, 1981-

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Current status of an organic Rankine cycle engine development program  

SciTech Connect

The steps taken to achieve improved bearing life in the organic Rankine cycle (ORC) engine being developed for use on solar parabolic dishes are presented. A summary of test results is given. Dynamic tests on the machine shaft and rotors of the ORC engine are also discussed.

Barber, R.E.

1984-03-01T23:59:59.000Z

322

Optimization of offshore oil and gas field development using mathematical programming  

E-Print Network (OSTI)

OPTIMIZATION OF OFFSHORE OIL AND GAS FIELD DEVELOPMENT USING MATHEMATICAL PROGRAMMING A Thesis by TODD THATCHER GRIMMETT Submitted to the Graduate College of Texas A6M University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE August 1986 Major Subject: Petroleum Engineering OPTIMIZATION OF OFFSHORE OIL AND GAS FIELD DEVELOPMENT VSING MATHEMATICAL PROGRAMMING A Thesis by TODD THATCHER GRIMMETT Approved as to style and content by: R. A. Startzma...

Grimmett, Todd Thatcher

2012-06-07T23:59:59.000Z

323

Laboratory directed research and development program FY 1997  

SciTech Connect

This report compiles the annual reports of Laboratory Directed Research and Development projects supported by the Berkeley Lab. Projects are arranged under the following topical sections: (1) Accelerator and fusion research division; (2) Chemical sciences division; (3) Computing Sciences; (4) Earth sciences division; (5) Environmental energy technologies division; (6) life sciences division; (7) Materials sciences division; (8) Nuclear science division; (9) Physics division; (10) Structural biology division; and (11) Cross-divisional. A total of 66 projects are summarized.

NONE

1998-03-01T23:59:59.000Z

324

Automotive Stirling Engine Development Program. RESD Summary report  

SciTech Connect

This is the final report compiling a summary of the information presented and discussed at the May 1983 Automotive Stirling Engine (AES) Reference Engine System Design (RESD) review held at the NASA Lewis Research Center. The design of the engine and its auxiliaries and controls is described. Manufacturing costs in production quantity are also presented. Engine system performance predictions are discussed and vehicle integration is developed, along with projected fuel economy levels.

Not Available

1984-05-01T23:59:59.000Z

325

Analysis to develop a program for energy-integrated farm systems  

SciTech Connect

A program to use renewable energy resources and possibly develop decentralization of energy systems for agriculture is discussed. The purpose of the research presented is to establish the objective of the program and identify guidelines for program development. The program's objective is determined by: (1) an analysis of the technologies that could be utilized to transform renewable farm resources to energy by the year 2000, (2) the quantity of renewable farm resources that are available, and (3) current energy-use patterns. Individual research, development, and demonstration projects are fit into a national program of energy-integrated farm systems on the basis of: (1) market need, (2) conversion potential, (3) technological opportunities, and (4) acceptability. Quantification of these factors for the purpose of establishing program guidelines is conducted using the following four precepts: (1) market need is identified by current use of energy for agricultural production; (2) conversion potential is determined by the availability of renewable resources; and (3) technological opportunities are determined by the state-of-the-art methods, techniques, and processes that can convert renewable resources into farm energy. Each of these factors is analyzed in Chapters 2 to 4. Chapter 5 draws on the analysis of these factors to establish the objective of the program and identify guidelines for the distribution of program funds. Chapter 6 then discusses the acceptability of integrated farm systems, which can not be quantified like the other factors.

Eakin, D.E.; Clark, M.A.; Inaba, L.K.; Johnson, K.I.

1981-09-01T23:59:59.000Z

326

Wind for Schools: Developing Educational Programs to Train the Next Generation of Wind Energy Experts (Poster)  

SciTech Connect

As the world moves toward a vision of expanded wind energy, the industry is faced with the challenges of obtaining a skilled workforce and addressing local wind development concerns. Wind Powering America's Wind for Schools Program works to address these issues. The program installs small wind turbines at community "host" schools while developing wind application centers at higher education institutions. Teacher training with interactive and interschool curricula is implemented at each host school, while students at the universities assist in implementing the host school systems while participating in other wind course work. This poster provides an overview of the program's objectives, goals, approach, and results.

Baring-Gould, I.; Flowers, L.; Kelly, M.; Miles, J.

2009-05-01T23:59:59.000Z

327

2015 Call for Proposals for the Department of Energy (DOE) Nuclear Safety Research and Development (NSR&D) Program  

Energy.gov (U.S. Department of Energy (DOE))

2015 Call for Proposals for the Department of Energy (DOE) Nuclear Safety Research and Development (NSR&D) Program.

328

Plutonium immobilization project development and testing quality assurance program description - February 1999  

SciTech Connect

Lawrence Livermore National Laboratory Immobilization Development and Testing organization (LLNL ID and T) is a Participant in the Plutonium Immobilization Project (PIP). The LLNL D and T has lead responsibilities for form characterization and qualification, ceramic form development, process/equipment development with plutonium, and process systems testing and validation for both conversion and immobilization. This work must be performed in accordance with the graded approach of a Quality Assurance (QA) Program. A QA Program has been developed at LLNL to meet the requirements of the DOE/MD Quality Assurance Requirements. The LLNL QA Program consists of a Quality Assurance Program Description (QAPD) and Quality Implementing Procedures. These documents interface and are a subset of the overall PIP QA Program Documents. The PIP QA Program is described in the PIP ID and T QA Plan, PIP QAPD, and QA Procedures. Other Participant Organizations also must document and describe their PIP compliant QA Programs in a QAPD and implementing procedures. The purpose of this LLNL QAPD is to describe the organization, management processes, QA Controls for Grading, functional responsibilities, levels of authority, and interfaces for those managing, performing, and assessing the adequacy of work.

MacLean, L M; Ziemba, J

1999-02-01T23:59:59.000Z

329

Support for DOE program in mineral waste-form development  

SciTech Connect

This research investigation relates to sintered simulation ceramic waste forms of the generic SYNROC compositional type. Though they have been formulated with simulated wastes only, they serve as prototypes for potential hot, processed, crystalline waste forms whose combined thermodynamic stability and physical integrity are considered to render them capable of long-term imobilization of high-level radwastes under deep geologic disposal conditions. The problems involved are nontrivial, largely because of the very complex nature of the radwastes: a typical waste stream would contain more than 31 cation species. When the stabilizing matrix constituents are included, the final batch composition must successfully account (and find substitutional homes for some 35 different cation species. One of the important objectives of this study thus has been to develop a computer-based method for simulating these complex ion substitutions, and for calculating the resultant phase demands and batch formulations. Primary goals of the study have been (1) use of that computer simulation capability to incorporate rationally the radwaste ions from a specific waste stream (PW-7a) into the available SYNROC lattice sites and (2) utilization of existing ceramic processing and sintering methodologies to assure (and to understand) the attainment of high density, fine microstructure, full phase development and other features of the sintered product which are known to relate directly to its integrity and leach resistance. Though improved resistance to leaching has been a continuing goal, time and budget constraints have precluded initiation of any leachability studies of these new compositions during this contract period. 27 references, 15 figures, 6 tables.

Palmour, H. III; Hare, T.M.; Russ, J.C.; Batchelor, A.D.; Paisley, M.J.; Freed, L.E.

1982-09-01T23:59:59.000Z

330

In 2011, the Sustainable Community Development Grant Pilot Program was launched. The project was  

E-Print Network (OSTI)

In 2011, the Sustainable Community Development Grant Pilot Program was launched. The project grant was developed for the purposes of providing faculty, students and staff the opportunity to work Ways to School," which promotes safe, healthy, sustainable transportation options to local schools. Now

Pulfrey, David L.

331

Status and progress in the U.S. RERTR fuel development program  

SciTech Connect

In 2004, U.S. Energy Secretary Abraham established the Global Threat Reduction Initiative (GTRI). This program set goals for the conversion of many of the world's research and test reactors to low-enriched fuels, including those for which suitable fuels are currently not available. Development of fuels for reactors that cannot currently be converted requires an aggressive program of fuel fabrication development, out-of-pile testing and characterization, irradiation testing, post-irradiation examination, and fuel performance modeling. Both dispersion and monolithic versions of a uranium-molybdenum based fuel are being developed in conjunction with strong international partnerships. The development is being carried out with the intent to qualify a low-enrichment, high- density fuel suitable for utilization in these reactors by the end of 2011, allowing conversion of the U.S. reactors by 2014. An overview of program progress and plans leading to fuel qualification will be presented. (author)

Wachs, Daniel M

2008-07-15T23:59:59.000Z

332

Hanford Site Permanent Isolation Surface Barrier Development Program: Fiscal year 1992 and 1993 highlights  

SciTech Connect

The Hanford Site Permanent Isolation Surface Barrier Development Program was jointly developed by the Pacific Northwest Laboratory and Westinghouse Hanford Company to design and test an earthen cover system that can be used to inhibit water infiltration; plant, animal, and human intrusion; and wind and water erosion. Kaiser Engineers Hanford Company provided engineering design support for the program. Work on barrier design has been under way at Hanford for nearly 10 years. The comprehensive development of a long-term barrier, formerly the Hanford Site Protective Barrier Development Program, was initiated in FY 1986, and a general field-tested design is expected to be completed by FY 1998. Highlights of efforts in FY 1992 and FY 1993 included the resumption of field testing, the completion of the prototype barrier design, and the convening of an external peer review panel, which met twice with the barrier development team. The review panel provided helpful guidance on current and future barrier development activities, while commending the program for its significant technical contributions to innovative barrier technology development.

Cadwell, L.L.; Link, S.O.; Gee, G.W. [eds.

1993-09-01T23:59:59.000Z

333

Department of Energy Small-Scale Hydropower Program: Feasibility assessment and technology development summary report  

SciTech Connect

This report summarizes two subprograms under the US Department of Energy's Small-Scale Hydroelectric Power Program. These subprograms were part of the financial assistance activities and included the Program Research and Development Announcement (PRDA) feasibility assessments and the technology development projects. The other major subprograms included engineering research and development, legal and institutional aspects, and technology transfer. These other subprograms are covered in their respective summary reports. The problems of energy availability and increasing costs of energy led to a national effort to develop economical and environmental attractive alternative energy resources. One such alternative involved the utilization of existing dams with hydraulic heads of <65 ft and the capacity to generate hydroelectric power of 15 MW or less. Thus, the PRDA program was initiated along with the Technology Development program. The purpose of the PRDA feasibility studies was to encourage development of renewable hydroelectric resources by providing engineering, economic, environmental, safety, and institutional information. Fifty-five feasibility studies were completed under the PRDA. This report briefly summarizes each of those projects. Many of the PRDA projects went on to become technology development projects. 56 refs., 1 fig., 2 tabs.

Rinehart, B.N.

1991-06-01T23:59:59.000Z

334

Microsoft Word - Front Matter thru Exec Summary_MR Drft_with no disclaimer.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Calendar Year 2010 Calendar Year 2010 Unlimited Release SAND2011-5781P Printed September 2011 Annual Groundwater Monitoring Report Prepared by Sandia National Laboratories, Albuquerque, New Mexico Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited Annual Groundwater Monitoring Report Calendar Year 2010 Groundwater Protection Program Sandia National Laboratories, New Mexico September 2011 Prepared by: Long Term Stewardship Department (4142) and Environmental Programs (4143)

335

Advanced turbine systems program conceptual design and product development: Quarterly report, November 1993--January 1994  

SciTech Connect

This report describes progress made in the advanced turbine systems program conceptual design and product development. The topics of the report include selection of the Allison GFATS, castcool technology development for industrial engines test plan and schedule, code development and background gathering phase for the ultra low NOx combustion technology task, active turbine clearance task, and water vapor/air mixture cooling of turbine vanes task.

NONE

1995-01-01T23:59:59.000Z

336

Transportation energy strategy: Project {number_sign}5 of the Hawaii Energy Strategy Development Program  

SciTech Connect

This study was prepared for the State Department of Business, Economic Development and Tourism (DBEDT) as part of the Hawaii Energy Strategy program. Authority and responsibility for energy planning activities, such as the Hawaii Energy Strategy, rests with the State Energy Resources Coordinator, who is the Director of DBEDT. Hawaii Energy Strategy Study No. 5, Transportation Energy Strategy Development, was prepared to: collect and synthesize information on the present and future use of energy in Hawaii`s transportation sector, examine the potential of energy conservation to affect future energy demand; analyze the possibility of satisfying a portion of the state`s future transportation energy demand through alternative fuels; and recommend a program targeting energy use in the state`s transportation sector to help achieve state goals. The analyses and conclusions of this report should be assessed in relation to the other Hawaii Energy Strategy Studies in developing a comprehensive state energy program. 56 figs., 87 tabs.

NONE

1995-08-01T23:59:59.000Z

337

Program plan for research and development of HVDC power systems and components  

SciTech Connect

The Division of Electric Energy Systems (EES) of the US Department of Energy (DOE) has formulated a program for research and development (R and D) of high-voltage direct-current (HVDC) power transmission and delivery systems and associated dc components. The program includes analysis of future utility system applications, development of new HVDC control and protection concepts, and advanced dc component research. The structure of this program will provide an appropriate balance between mid- and long-term options for the enhancement of HVDC power transmission and delivery for future electric power systems. This HVDC research program is intended to further develop and improve an important energy transport technology, one that will offer many opportunities to reduce future energy costs. The economics and operating constraints in alternating-current (ac) solutions strongly indicate that new HVDC technology options will be advantageous and will provide an enhanced ability to use generation and transmission system resources efficiently and economically in existing electric energy systems. Studies show that further development of this technology will lead to significant integration of new HVDC techniques into existing electric energy systems with appreciable economic and technical benefit. The R and D proposed in this HVDC Program Plan will be of substantial value to future electric power systems.

Not Available

1984-01-01T23:59:59.000Z

338

Development of tritium technology for the United States magnetic fusion energy program  

SciTech Connect

Tritium technology development for the DOE fusion program is taking place principally at three laboratories, Mound Facility, Argonne National Laboratory and the Los Alamos Scientific Laboratory. This paper will review the major aspects of each of the three programs and look at aspects of the tritium technology being developed at other laboratories within the United States. Facilities and experiments to be discussed include the Tritium Effluent Control Laboratory and the Tritium Storage and Delivery System for the Tokamak Fusion Test Reactor at Mound Facility; the Lithium Processing Test Loop and the solid breeder blanket studies at Argonne; and the Tritium Systems Test Assembly at Los Alamos.

Anderson, J.L.; Wilkes, W.R.

1980-01-01T23:59:59.000Z

339

The U.S. Department of Energy Wind Turbine Development Program  

SciTech Connect

The development of technologically-advanced wind turbines continues to be a high priority of the US wind industry. The United States Department of Energy (DOE) is sponsoring a range of projects that assist the wind industry to design, develop, and test new wind turbines. The overall goal is to develop turbines that can compete with conventional electric generation with a cost of energy (COE) of 5 cents/kWh at 5.8 m/s (13 mph sites) by the mid-1990s and with a cost of energy of 4 cents/kWh or less at 5.8 m/s sites by the year 2000. These goals will be supported through the DOE Turbine Development Program. The Turbine Development Program uses a two-path approach. The first path assists US industry to develop and integrate innovative technologies into utility-grade wind turbines for the near-term (mid-1990s). The second path assists industry to develop a new generation of turbines for the year 2000. This paper describes present and planned projects under the Turbine Development Program.

Link, H.; Laxson, A.; Smith, B. [National Renewable Energy Lab., Golden, CO (United States); Goldman, P. [Dept. of Energy, Washington, DC (United States)

1995-03-01T23:59:59.000Z

340

Automotive Stirling Engine Development Program. Technical progress report, March 30-June 28, 1980  

SciTech Connect

The DOE/NASA Automotive Stirling Engine Development program has been underway for approximately 27 months. This is the ninth quarterly report to be issued, and it covers the period of March 30-June 28, 1980. The previous quarterly report presented information on the Reference Engine design and the design of the ASE Mod I (Automotive Stirling Engine Model No. I) as presented to NASA in January 1980. The report also reviewed component and subsystem development activities, the testing of the baseline P-40 engines, the progress being made on computer code developments, and its presented data on the screening of potential seals materials. This quarterly report presents updated information on the Reference Engine and the ASE Mod I as presented to NASA at the Design Review Meeting held in May. NASA has approved the updated Reference Engine and ASE Mod I designs, and manufacturing/procurement has started. The ASE Mod I is the program's first Stirling engine designed specifically for automotive use; it is a steppingstone to the program's final prototype engine, the ASE Mod II. Current information is presented on component and subsystems development activities and engine and vehicle testing. Computer code development progress is also covered. Program engine operating hours through the end of this quarterly period (through June 28, 1980) reached a total of 5095 h.

Not Available

1980-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

University Reciprocating Engine Program Review  

NLE Websites -- All DOE Office Websites (Extended Search)

University Reciprocating Engine Program Review University Reciprocating Engine Program Review April 9-10, 2003 Table of Contents Disclaimer Papers and Presentations Meeting Overview & Outcomes [PDF-192KB] Agenda [PDF-143KB] DOE/EERE/DER Natural Gas Reciprocating Engines Program The Advanced University Reciprocating Engine Research Program (AUREP) is a Distributed Energy Resources (DER) Program managed within DOE's Office of Energy Efficiency and Renewable Energy (EERE). Click on the link above to find abundant information on the natural gas reciprocating engine program (Technology Primer, Related Programs, Documents & Resources, News & Events, Solicitations and the DER Site Map). Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

342

Nuclear safeguards research and development. Program status report, October 1980-January 1981  

SciTech Connect

This report presents the status of the Nuclear Safeguards Research and Development Program pursued by the Energy, Chemistry-Materials Science, and Operational Security/Safeguards Divisions of the Los Alamos National Laboratory. Topics include nondestructive assay technology development and applications, international safeguards systems. Also discussed are training courses, technology transfer, analytical chemistry methods for fissionable materials safeguards, the Department of Energy Computer Security Technical Center, and operational security.

Henry, C.N. (comp.)

1981-11-01T23:59:59.000Z

343

Research and development conference: California Institute for Energy Efficiency (CIEE) program  

SciTech Connect

CIEE's first Research and Development Conference will introduce you to some of the results achieved to date through CIEE-sponsored multiyear research performed in three programs: building energy efficiency, air quality impacts of energy efficiency, and end-use resource planning. Results from scoping studies, Director's discretionary research, and exploratory research will also be featured.

Not Available

1991-01-01T23:59:59.000Z

344

Mapping cost-effective farmland preservation priorities A project funded the USDA NRI Rural Development Program  

E-Print Network (OSTI)

Mapping cost-effective farmland preservation priorities A project funded the USDA NRI Rural Development Program Project Director: Frank Davis, University of California Santa Barbara Project Staff: David Stoms, Jason Kreitler Project Advisors: Tim Duane, Julie Gustanski, Ralph Heimlich, Dan Press, Peter

California at Santa Barbara, University of

345

Development of a criticality safety program guide for DOE nonreactor nuclear facilities  

SciTech Connect

The objective of this paper was a presentation and discussion of the US DOE`s efforts to develop a NCS program guide for the implementation of 10CFR830.380. Topics of discussion were: (1) introduction/general practices; (2) definition of terms; (3) administration; (4) NCSA guidelines; (5) calculations; (6) conduct of operations; (7) state support; and (8) emergency preparedness.

Hopper, C.M. [Oak Ridge National Lab., TN (United States)

1994-09-01T23:59:59.000Z

346

Oregon UniversityVenture Development Fund (UVDF) A new tax credit program supporting  

E-Print Network (OSTI)

Oregon UniversityVenture Development Fund (UVDF) A new tax credit program supporting higher credit: Sixty percent of your gift to the UVDF is eligible for a tax credit. In any one year, you can use up to 20 percent of your total contribution as a tax credit, not to exceed a donor's Oregon tax

Bertini, Robert L.

347

Hanford Tank Waste Treatment and Immobilization Plant (WTP) Waste Feed Qualification Program Development Approach - 13114  

SciTech Connect

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a nuclear waste treatment facility being designed and constructed for the U.S. Department of Energy by Bechtel National, Inc. and subcontractor URS Corporation (under contract DE-AC27-01RV14136 [1]) to process and vitrify radioactive waste that is currently stored in underground tanks at the Hanford Site. A wide range of planning is in progress to prepare for safe start-up, commissioning, and operation. The waste feed qualification program is being developed to protect the WTP design, safety basis, and technical basis by assuring acceptance requirements can be met before the transfer of waste. The WTP Project has partnered with Savannah River National Laboratory to develop the waste feed qualification program. The results of waste feed qualification activities will be implemented using a batch processing methodology, and will establish an acceptable range of operator controllable parameters needed to treat the staged waste. Waste feed qualification program development is being implemented in three separate phases. Phase 1 required identification of analytical methods and gaps. This activity has been completed, and provides the foundation for a technically defensible approach for waste feed qualification. Phase 2 of the program development is in progress. The activities in this phase include the closure of analytical methodology gaps identified during Phase 1, design and fabrication of laboratory-scale test apparatus, and determination of the waste feed qualification sample volume. Phase 3 will demonstrate waste feed qualification testing in support of Cold Commissioning. (authors)

Markillie, Jeffrey R.; Arakali, Aruna V.; Benson, Peter A.; Halverson, Thomas G. [Hanford Tank Waste Treatment and Immobilization Plant Project, Richland, WA 99354 (United States)] [Hanford Tank Waste Treatment and Immobilization Plant Project, Richland, WA 99354 (United States); Adamson, Duane J.; Herman, Connie C.; Peeler, David K. [Savannah River National Laboratory, Aiken, SC 29808 (United States)] [Savannah River National Laboratory, Aiken, SC 29808 (United States)

2013-07-01T23:59:59.000Z

348

Status of the GA/MCA 12 Tesla Coil Development Program  

SciTech Connect

The current status of the Team One effort of the DOE/OFE/D and T 12 Tesla Coil Development Program is presented. Subatmospheric, helium bath cooled, NbTiTa alloy is employed for the test coil, and ETF TF-coil concept. General Atomic is the Team One leader, with Magnetic Corporation of American as industrial subcontractor.

Alcorn, J.S.; Purcell, J.R.; Chen, W.Y.; Hsu, Y.H.

1980-09-01T23:59:59.000Z

349

DEVELOPMENT OF A GIS TO ENHANCE NMFS'S SEA TURTLE TRACKING PROGRAM IN THE GULF OF MEXICO  

E-Print Network (OSTI)

DEVELOPMENT OF A GIS TO ENHANCE NMFS'S SEA TURTLE TRACKING PROGRAM IN THE GULF OF MEXICO by MAURICE (Lepidochelys kempii), 17 green (Chelonia mydas) and 6 loggerhead (Caretta caretta) sea turtles have been). The goal of our research is to characterize sea turtle habitats and movement patterns. With inhouse

350

Lead Research and Development Activity for DOE's High Temperature, Low Relative Humidity Membrane Program (Topic 2)  

SciTech Connect

The Department of Energys High Temperature, Low Relative Humidity Membrane Program was begun in 2006 with the Florida Solar Energy Center (FSEC) as the lead organization. During the first three years of the program, FSEC was tasked with developing non-Nafion proton exchange membranes with improved conductivity for fuel cells. Additionally, FSEC was responsible for developing protocols for the measurement of in-plane conductivity, providing conductivity measurements for the other funded teams, developing a method for through-plane conductivity and organizing and holding semiannual meetings of the High Temperature Membrane Working Group (HTMWG). The FSEC membrane research focused on the development of supported poly[perfluorosulfonic acid] (PFSA) Teflon membranes and a hydrocarbon membrane, sulfonated poly(ether ether ketone). The fourth generation of the PFSA membrane (designated FSEC-4) came close to, but did not meet, the Go/No-Go milestone of 0.1 S/cm at 50% relative humidity at 120 C. In-plane conductivity of membranes provided by the funded teams was measured and reported to the teams and DOE. Late in the third year of the program, DOE used this data and other factors to decide upon the teams to continue in the program. The teams that continued provided promising membranes to FSEC for development of membrane electrode assemblies (MEAs) that could be tested in an operating fuel cell. FSEC worked closely with each team to provide customized support. A logic flow chart was developed and discussed before MEA fabrication or any testing began. Of the five teams supported, by the end of the project, membranes from two of the teams were easily manufactured into MEAs and successfully characterized for performance. One of these teams exceeded performance targets, while the other requires further optimization. An additional team developed a membrane that shows great promise for significantly reducing membrane costs and increasing membrane lifetime.

James Fenton, PhD; Darlene Slattery, PhD; Nahid Mohajeri, PhD

2012-09-05T23:59:59.000Z

351

Developing public awareness for climate change: Support from international research programs  

SciTech Connect

Developing regional and local public awareness and interest in global climate change has been mandated as an important step for increasing the ability for setting policy and managing the response to climate change. Research programs frequently have resources that could help reach regional or national goals for increasing the capacity for responding to climate change. To obtain these resources and target recipients appropriately, research investigators need clear statements of national and regional strategies or priorities as a guide. One such program, the Atmospheric Radiation Measurement (ARM) Program, has a requirement to develop local or regional education enrichment programs at their observational sites in the central US, the tropical western Pacific (TWP), and on the north slope of alaska. ARM's scientific goals will result in a flow of technical data and as well as technical expertise that can assist with regional needs to increase the technical resources needed to address climate change issues. Details of the ARM education program in the Pacific will be presented.

Barnes, F.J.; Clements, W.E.

1998-12-31T23:59:59.000Z

352

Department of Energy`s Wire Development Workshop - Superconductivity program for electric systems  

SciTech Connect

The 1996 High-Temperature Superconducting Wire Development Workshop was held on January 31--February 1 at the Crown Plaza Tampa Westshore in Tampa, Florida. The meeting was hosted by Tampa Electric Company and sponsored by the Department of Energy`s Superconductivity Program for Electric Systems. The meeting focused on recent high-temperature superconducting wire development activities in the Department of Energy`s Superconductivity Systems program. Tampa Electric`s Greg Ramon began the meeting by giving a perspective on the changes now occurring in the utility sector. Major program wire development accomplishments during the past year were then highlighted, particularly the world record achievements at Los Alamos and Oak Ridge National Laboratories. The meeting then focussed on three priority technical issues: thallium conductors; AC losses in HTS conductors; and coated conductors on textured substrates. Following in-depth presentations, working groups were formed in each technology area to discuss and critique the most important current research and development issues. The working groups identified research areas that have the potential for greatly enhancing the wire development effort. These areas are discussed in the summary reports from each of the working groups. This document is a compilation of the workshop proceedings including all general session presentations and summary reports from the working groups.

NONE

1996-06-01T23:59:59.000Z

353

Maximizing the Benefit from the D&D Technology Development Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance Technical Assistance Office level Program Planning Process development Page 1 of 2 Environmental Management Corporate HQ DOE - Complex Wide Maximizing the Benefit from the D&D Technology Development Program Challenge The Office of Deactivation and Decommissioning (D&D)/Facility Engineering (FE) is charged with reducing the technical risk and uncertainty of D&D activities across the Environmental Management (EM) Complex through the identification, development and demonstration of alternative technologies as well as through the provision of technical assistance activities such as Lessons Learned Workshops and External Technical Review Teams. There is a need to ensure an optimum balance between these different types of projects as well as to ensure that the projects funded are focused on the

354

Waste Tank Organic Safety Program: Analytical methods development. Progress report, FY 1994  

SciTech Connect

The objectives of this task are to develop and document extraction and analysis methods for organics in waste tanks, and to extend these methods to the analysis of actual core samples to support the Waste Tank organic Safety Program. This report documents progress at Pacific Northwest Laboratory (a) during FY 1994 on methods development, the analysis of waste from Tank 241-C-103 (Tank C-103) and T-111, and the transfer of documented, developed analytical methods to personnel in the Analytical Chemistry Laboratory (ACL) and 222-S laboratory. This report is intended as an annual report, not a completed work.

Campbell, J.A.; Clauss, S.A.; Grant, K.E. [and others

1994-09-01T23:59:59.000Z

355

Comprehensive Test Ban Treaty research and development FY95-96 program plan  

SciTech Connect

The Department of Energy (DOE) is responsible for the United States Government`s (USG) research and development (R&D) functions for monitoring nuclear explosions in the context of a Comprehensive Test Ban Treaty (CTBT). This responsibility includes the November 1993 transfer of the Department of Defense`s (DoD) CTBT R&D responsibility to DOE. The DOE research program builds on the broad base of USG expertise developed historically and includes R&D for detecting, locating, identifying, and characterizing nuclear explosions in all environments. The Office of Research and Development (NN-20), within the Department of Energy`s Office of Nonproliferation and National Security, formulates and executes the efforts necessary to meet the Department`s responsibilities. The following DOE laboratories as a team will support NN-20 in implementing the program plan: Lawrence Livermore National Laboratory, Los Alamos National Laboratory, Pacific Northwest Laboratory, and Sandia National Laboratories. DOE has committed to a cooperative program that draws upon the core competencies of the national laboratories and upon the strengths of other government agencies and the private sector (academia and industry). The integration of resources under a common direction will allow the program to be flexible and responsive to changing technical and policy requirements while maximizing the effectiveness of funding appropriations. DOE will develop and demonstrate appropriate technologies, algorithms, procedures, and integrated systems in a cost-effective and timely manner. The program comprises seismic, radionuclide, hydroacoustic, and infrasound monitoring; on-site inspection; space-based monitoring; and automated data processing elements.

None

1994-11-01T23:59:59.000Z

356

Development of Hydrogen Education Programs for Government Officials - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Shannon Baxter-Clemmons South Carolina Hydrogen and Fuel Cell Alliance (SCHFCA) P.O. Box 12302 Columbia, SC 29211 Phone: (803) 545-0189 Email: baxterclemmons@schydrogen.org DOE Manager GO: Gregory Kleen Phone: (720) 356-1672 Email: Gregory.Kleen@go.doe.gov Technical Advisor Kim Cierpik Phone: (720) 356-1266 Email: kim.cierpik@go.doe.gov Contract Number: DE-FG36-08GO18113 Subcontractors: * Greenway Energy, Aiken, SC * Advanced Technology International, Charleston, SC Project Start Date: October 1, 2008 Project End Date: January 31, 2013 Fiscal Year (FY) 2012 Objectives Further develop relationships with government *

357

Testing Protocols and Results: Airport Sound Program Experience and BPI-Resnet Development  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Testing Protocols & Results: Testing Protocols & Results: Airport Sound Program Experience and BPI/RESNET Development Spring 2012 Residential Energy Efficiency Stakeholder Meeting: Combustion Safety in Tight Houses Jim Fitzgerald Center for Energy and Environment Building Performance Institute Page 2  Weatherization, custom windows & central air conditioning  Attic insulation, wall insulation, and attic air sealing - borrowed specs from energy programs and used weatherization contractors  Average house leakage: 7.8 ACH50 before 5.4 ACH50 after MSP secret: this Airport Sound Program does weatherization work to reduce sound All Tightening of Existing Homes Can Affect Combustion Appliance Safety Tightening work was done on 3000 homes with no testing, what could possibly go wrong?

358

Laboratory Directed Research and Development Program. Annual report to the Department of Energy, December 1997  

SciTech Connect

New ideas and opportunities fostering the advancement of technology are occurring at an ever increasing rate. It, therefore, seems appropriate that a vehicle be available which fosters the development of new ideas and technologies, promotes the early exploration and exploitation of creative and innovative concepts, and develops new fundable R and D projects and programs if BNL is to carry out its primary mission and support the basic Department of Energy activities. At Brookhaven National Laboratory one such method is through its Laboratory Directed Research and Development Program. This discretionary research and development tool is critical in maintaining the scientific excellence and vitality of the Laboratory. Additionally, it is a means to stimulate the scientific community, fostering new science and technology ideas, which is the major factor in achieving and maintaining staff excellence and a means to address national needs within the overall mission of the DOE and BNL. The Project Summaries with their accomplishments described in this report reflect the above. Aside from leading to new fundable or promising programs and producing especially noteworthy research, they have resulted in numerous publications in various professional and scientific journals and presentations at meetings and forums.

Ogeka, G.J.; Searing, J.M.

1997-12-01T23:59:59.000Z

359

Argonne National Laboratory: Laboratory Directed Research and Development FY 1993 program activities. Annual report  

SciTech Connect

The purposes of Argonne`s Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory`s R&D capabilities, and further the development of its strategic initiatives. Projects are selected from proposals for creative and innovative R&D studies which are not yet eligible for timely support through normal programmatic channels. Among the aims of the projects supported by the Program are establishment of engineering ``proof-of-principle`` assessment of design feasibility for prospective facilities; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these projects are closely associated with major strategic thrusts of the Laboratory as described in Argonne`s Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne as indicated in the Laboratory LDRD Plan for FY 1993.

none,

1993-12-23T23:59:59.000Z

360

Laboratory directed research and development. FY 1991 program activities: Summary report  

SciTech Connect

The purposes of Argonne`s Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory`s R&D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering ``proof-of-principle``; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne`s Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

Not Available

1991-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Public Interest Energy Research (PIER) Program FINAL PROJECT REPORT  

E-Print Network (OSTI)

is a growing technology in aerospace gas turbines and is a candidate to support fuel flexible stationary power, Efficient and Low Emissions Gas Turbine Applications JANUARY 2012 CEC5002012001 Prepared for Director RESEARCH AND DEVELOPMENT DIVISION Robert P. Oglesby Executive Director DISCLAIMER This report

362

Wind Developer's Perspective on Incorporating Wind in Cap and Trade Program  

Wind Powering America (EERE)

Developer's Perspective Developer's Perspective on Incorporating Wind in Cap & Trade Programs January 12, 2006 Kevin Rackstraw Clipper Windpower, Inc. Clipper Windpower, Inc. 301/263 301/263- -0028 0028 krackstraw@clipperwind.com krackstraw@clipperwind.com About Clipper Windpower * Founded by James Dehlsen, a wind energy pioneer and recognized world leader in the wind industry, and founder of the company that is now GE Wind * Team is one of the most experienced in the business * Both a developer of wind projects and manufacturer of large wind turbines * Over $1.5 billion of wind projects developed * Another $4 billion of wind projects in the development pipeline Motivations * Emissions reduction claims: * In cap and trade states, neither we nor our marketers can state that we reduce capped emissions w/out allowances

363

Development of an electrical impedance computed tomographic two-phase flows analyzer. Annual technical report for program renewal  

SciTech Connect

This progress report details the theoretical development, numerical results, experimental design (mechanical), experimental design (electronic), and experimental results for the research program for the development of an electrical impedance computed tomographic two-phase flow analyzer.

Jones, O.C.

1993-05-01T23:59:59.000Z

364

Argonne National Laboratory Annual Report of Laboratory Directed Research and Development program activities FY 2011.  

SciTech Connect

As a national laboratory Argonne concentrates on scientific and technological challenges that can only be addressed through a sustained, interdisciplinary focus at a national scale. Argonne's eight major initiatives, as enumerated in its strategic plan, are Hard X-ray Sciences, Leadership Computing, Materials and Molecular Design and Discovery, Energy Storage, Alternative Energy and Efficiency, Nuclear Energy, Biological and Environmental Systems, and National Security. The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel technical concepts, enhance the Laboratory's research and development (R and D) capabilities, and pursue its strategic goals. projects are selected from proposals for creative and innovative R and D studies that require advance exploration before they are considered to be sufficiently developed to obtain support through normal programmatic channels. Among the aims of the projects supported by the LDRD Program are the following: establishment of engineering proof of principle, assessment of design feasibility for prospective facilities, development of instrumentation or computational methods or systems, and discoveries in fundamental science and exploratory development.

(Office of The Director)

2012-04-25T23:59:59.000Z

365

Advanced Diesel Engine Component Development Program, final report - tasks 4-14  

SciTech Connect

The Advanced Diesel Engine Component Development (ADECD) Program is a multi-year, multi-phase effort to develop and demonstrate the critical technology needed to advance the heavy-duty low heat rejection (LHR) engine concept for the long-haul, heavy-duty truck market. The ADECD Program has been partitioned into two phases. The first phase, Phase 1, was completed in 1986, resulting in definition of the Advanced Diesel Reference Engine (ADRE)III. The second phase, Phase 11/111, examines the feasibility of the ADRE concepts for application to the on-highway diesel engine. Phase 11/111 is currently underway. This project is sponsored by the U.S. Department of Energy, Office of Transportation Technologies. The work has been performed by the Detroit Diesel Corporation (DDC) under Contract DEN3-329 with the NASA Lewis Research Center, who provide project management and technical direction.

Kaushal, T.S.; Weber, K.E.

1994-11-01T23:59:59.000Z

366

Notice of Intent to Develop DOE O 470.5, Integrating Existing Technical Security Program Requirements  

Directives, Delegations, and Requirements

This memorandum provides justification for the development of one integrated and consolidated set of requirements for the Department of Energy (DOE) Technical Security Program (TSP). This Order will combine the existing necessary requirements from DOE Manual (M) 205.1-3, Telecommunications Security Manual, dated 4-17-2006 and DOE M 470.4-4A chg.1, Information Security Manual, dated 10-12-2010; Section D -Technical Surveillance Countermeasures, into a single DOE Order defining the DOE TSP.

2013-08-21T23:59:59.000Z

367

NREL Develops Diagnostic Test Cases To Improve Building Energy Simulation Programs (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Develops Develops Diagnostic Test Cases To Improve Building Energy Simulation Programs The National Renewable Energy Laboratory (NREL) Residential and Commercial Buildings research groups developed a set of diagnostic test cases for building energy simulations. Eight test cases were developed to test surface conduction heat transfer algorithms of building envelopes in building energy simulation programs. These algorithms are used to predict energy flow through external opaque surfaces such as walls, ceilings, and floors. The test cases consist of analyti- cal and vetted numerical heat transfer solutions that have been available for decades, which increases confidence in test results. NREL researchers adapted these solutions for comparisons with building energy simulation results.

368

A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report  

SciTech Connect

The overall objective of the program was to develop correlations to predict physical properties within requirements of engineering precision from a knowledge of pulping conditions and of kraft black liquor composition, if possible. These correlations were to include those relating thermodynamic properties to pulping conditions and liquor composition. The basic premise upon which the research was based is the premise that black liquor behaves as a polymer solution. This premise has proven to be true, and has been used successfully in developing data reduction methods and in interpreting results. A three phase effort involving pulping, analysis of liquor composition, and measurement of liquor properties was conducted.

Fricke, A.L.; Zaman, A.A.

1998-05-01T23:59:59.000Z

369

The DOE Advanced Gas Reactor (AGR) Fuel Development and Qualification Program  

SciTech Connect

The Department of Energy has established the Advanced Gas Reactor Fuel Development and Qualification Program to address the following overall goals: Provide a baseline fuel qualification data set in support of the licensing and operation of the Next Generation Nuclear Plant (NGNP). Gas-reactor fuel performance demonstration and qualification comprise the longest duration research and development (R&D) task for the NGNP feasibility. The baseline fuel form is to be demonstrated and qualified for a peak fuel centerline temperature of 1250C. Support near-term deployment of an NGNP by reducing market entry risks posed by technical uncertainties associated with fuel production and qualification. Utilize international collaboration mechanisms to extend the value of DOE resources. The Advanced Gas Reactor Fuel Development and Qualification Program consists of five elements: fuel manufacture, fuel and materials irradiations, postirradiation examination (PIE) and safety testing, fuel performance modeling, and fission product transport and source term evaluation. An underlying theme for the fuel development work is the need to develop a more complete fundamental understanding of the relationship between the fuel fabrication process, key fuel properties, the irradiation performance of the fuel, and the release and transport of fission products in the NGNP primary coolant system. Fuel performance modeling and analysis of the fission product behavior in the primary circuit are important aspects of this work. The performance models are considered essential for several reasons, including guidance for the plant designer in establishing the core design and operating limits, and demonstration to the licensing authority that the applicant has a thorough understanding of the in-service behavior of the fuel system. The fission product behavior task will also provide primary source term data needed for licensing. An overview of the program and recent progress will be presented.

David Petti; Hans Gougar; Gary Bell

2005-05-01T23:59:59.000Z

370

Phase I of the Near-Term Hybrid Passenger-Vehicle Development Program. Final report  

SciTech Connect

Heat engine/electric hybrid vehicles offer the potential of greatly reduced petroleum consumption, compared to conventional vehicles, without the disadvantages of limited performance and operating range associated with purely electric vehicles. This report documents a hybrid-vehicle design approach which is aimed at the development of the technology required to achieve this potential - in such a way that it is transferable to the auto industry in the near term. The development of this design approach constituted Phase I of the Near-Term Hybrid-Vehicle Program. The major tasks in this program were: (1) Mission Analysis and Performance Specification Studies; (2) Design Tradeoff Studies; and (3) Preliminary Design. Detailed reports covering each of these tasks are included as appendices to this report and issued under separate cover; a fourth task, Sensitivity Studies, is also included in the report on the Design Tradeoff Studies. Because of the detail with which these appendices cover methodology and both interim and final results, the body of this report was prepared as a brief executive summary of the program activities and results, with appropriate references to the detailed material in the appendices.

Not Available

1980-10-01T23:59:59.000Z

371

Technology development program for Idaho Chemical Processing Plant spent fuel and waste management  

SciTech Connect

Acidic high-level radioactive waste (HLW) resulting from fuel reprocessing at the Idaho Chemical Processing Plant (ICPP) for the U.S. Department of Energy (DOE) has been solidified to a calcine since 1963 and stored in stainless steel bins enclosed by concrete vaults. Several different types of unprocessed irradiated DOE-owned fuels are also in storage at the ICPP. In April, 1992, DOE announced that spent fuel would no longer be reprocessed to recover enriched uranium and called for a shutdown of the reprocessing facilities at the ICPP. A new Spent Fuel and HLW Technology Development program was subsequently initiated to develop technologies for immobilizing ICPP spent fuels and HLW for disposal, in accordance with the Nuclear Waste Policy Act. The Program elements include Systems Analysis, Graphite Fuel Disposal, Other Spent Fuel Disposal, Sodium-Bearing Liquid Waste Processing, Calcine Immobilization, and Metal Recycle/Waste Minimization. This paper presents an overview of the ICPP radioactive wastes and current spent fuels, and describes the Spent Fuel and HLW Technology program in more detail.

Ermold, L.F.; Knecht, D.A.; Hogg, G.W.; Olson, A.L.

1993-08-01T23:59:59.000Z

372

Moving Bed, Granular Bed Filter Development Program: Option 1, Component Test Facility. Task 3, Test plan  

SciTech Connect

In the base contract, Combustion Power Co. developed commercial designs for a moving granular-bed filter (GBF). The proposed filter is similar to previous designs in terms of its shape and method of filtration. The commercial designs have scaled the filter from a 5 ft diameter to as large as a 20 ft diameter filter. In Task 2 of the Moving Bed-Granular Filter Development Program, all technical concerns related to the further development of the filter are identified. These issues are discussed in a Topical Report which has been issued as part of Task 2. Nineteen issues are identified in this report. Along with a discussion of these issues are the planned approaches for resolving each of these issues. These issues will be resolved in either a cold flow component test facility or in pilot scale testing at DOE`s Power System Development Facility (PSDF) located at Southem Company Services` Wilsonville facility. Task 3 presents a test plan for resolving those issues which can be addressed in component test facilities. The issues identified in Task 2 which will be addressed in the component test facilities are: GBF scale-up; effect of filter cone angle and sidewall materials on medium flow and ash segregation; maximum gas filtration rate; lift pipe wear; GBF media issues; mechanical design of the gas inlet duct; and filter pressure drop. This document describes a test program to address these issues, with testing to be performed at Combustion Power Company`s facility in Belmont, California.

Haas, J.C.; Purdhomme, J.W.; Wilson, K.B.

1994-04-01T23:59:59.000Z

373

Development and Implementation of Degree Programs in Electric Drive Vehicle Technology  

Energy.gov (U.S. Department of Energy (DOE))

2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

374

Development and Implementation of Degree Programs in Electric Drive Vehicle Technology  

Energy.gov (U.S. Department of Energy (DOE))

2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

375

EM-54 Technology Development In Situ Remediation Integrated Program. Annual report  

SciTech Connect

The Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of Environmental Restoration and Waste Management (EM) in November 1989. EM manages remediation of all DOE sites as well as wastes from current operations. The goal of the EM program is to minimize risks to human health, safety and the environment, and to bring all DOE sites into compliance with Federal, state, and local regulations by 2019. EM-50 is charged with developing new technologies that are safer, more effective and less expensive than current methods. The In Situ Remediation Integrated Program (the subject of this report) is part of EM-541, the Environmental Restoration Research and Development Division of EM-54. The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: Significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces; in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP tends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years.

Not Available

1993-08-01T23:59:59.000Z

376

Programming  

NLE Websites -- All DOE Office Websites (Extended Search)

provided on the Cray systems at NERSC. The Programming Environment is managed by a meta-module named similar to "PrgEnv-gnu4.6". The "gnu" indicates that it is providing the GNU...

377

Bringing Automated Model Checking to PLC Program Development - A CERN Case Study  

E-Print Network (OSTI)

Verification of critical software is a high priority but a challenging task for industrial control systems. Model checking appears to be an appropriate approach for this purpose. However, this technique is not widely used in industry yet, due to some obstacles. The main obstacles encountered when trying to apply formal verification techniques at industrial installations are the difficulty of creating models out of PLC programs and defining formally the specification requirements. In addition, models produced out of real-life programs have a huge state space, thus preventing the verification due to performance issues. Our work at CERN (European Organization for Nuclear Research) focuses on developing efficient automatic verification methods for industrial critical installations based on PLC (Programmable Logic Controller) control systems. In this paper, we present a tool generating automatically formal models out of PLC code. The tool implements a general methodology which can support several input languages, ...

Fernandez Adiego, B; Tournier, J-C; Blanco Vinuela, E; Gonzalez Suarez, V M

2014-01-01T23:59:59.000Z

378

Research and development separation technology: The DOE Industrial Energy Conservation Program  

SciTech Connect

This brochure summarizes the Office of Industrial Programs' RandD efforts in the advancement of separation technology. The purpose of this brochure is to provide interested parties with information on federal industrial energy conservation activities in separation technology. The brochure is comprised of the following sections: Separation Technology, summarizes the current state of separation technology and its uses. Potential Energy Savings, discusses the potential for industrial energy conservation through the implementation of advanced separation processes. Office of Industrial Programs' RandD Efforts in Separation Technology Development, describes the separation RandD projects conducted by IP. RandD Data Base, lists contractor, principal investigator, and location of each separation-related RandD effort sponsored by IP.

Not Available

1987-07-01T23:59:59.000Z

379

Technical Assistance to Developers - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program T. Rockward and R.L. Borup (Primary Contacts), F. Garzon, R. Mukundan, and D. Spernjak Los Alamos National Laboratory (LANL) P.O. Box 1663 Los Alamos, NM 87545 Phone: (505) 667-9587 and (505) 667-2823 Emails: trock@lanl.gov, borup@lanl.gov DOE Manager HQ: Nancy Garland Phone: (202) 586-5673 Email: Nancy.Garland@ee.doe.gov Project Start Date: October 2003 Project End Date: Project continuation and direction determined annually by DOE Objectives Support technically, as directed by DOE, fuel cell * component and system developers Assess fuel cell materials and components and give * feedback to developers Assist the DOE Durability Working Group with the * development of various new material durability testing

380

HEALXH AND SAFEIY RFSEARCH DIVISION Waste Management Research and Development Programs  

Office of Legacy Management (LM)

HEALXH AND SAFEIY RFSEARCH DIVISION HEALXH AND SAFEIY RFSEARCH DIVISION Waste Management Research and Development Programs (Activity No. AH 10 05 00 0; NEAHC01) RADIOLOGICAL SURVEY OFTHE FORMER AEROPROJECTS, FACILITY, WEST cI%mER, PENNSYL.VANIA W. D. Cottrell and R. F. Carrier Date published - October 1990 Investigation Team R. E. Swaja - Measurement Applications and Development Manager W. D. Cottrell - NSRAP Project Director Suwey Team Members J. A Roberts* J. L. Quillent l Bechtel National, Inc tNuclear Fuel Services, Inc Work performed by the MEASUREMENT APPLXATIONS AND DEVELOPMENT GROUP Prepared by the OAK RIDGE NATIONAL LABORATORY Oak Ridge, Tennessee 378314285 operated by MARTINMARIEITAENERGYSYSIEM&INC for the U. S. DEF+ARm OF ENERGY under contract DE-ACO5-840R21400 ACKNOWLEDGMENTS ...................

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Nuclear Safety R&D in the Waste Processing Technology Development & Deployment Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

R&D in the Waste Processing R&D in the Waste Processing Technology Development & Deployment Program Presentation to the DOE High Level Waste Corporate Board July 29, 2009 Al Baione Office of Waste Processing DOE-EM Office of Engineering & Technology 2 Outline Nuclear Safety Research & Development Overview Summary of EM- NSR&D Presentations from February 2009 Evaluating Performance of Nuclear Grade HEPA Filters under Fire/Smoke Challenge Conditions Structural Integrity Initiative for HLW Tanks Pipeline Plugging and Prevention Advanced Mixing Models Basic Science Opportunities in HLW Storage and Processing Safety Cementitious Barriers Partnership 3 Nuclear Safety Research & Development Overview DNFSB 2004-1 identified need for renewed DOE attention to nuclear safety R&D

382

Development of a Dispatchable PV Peak Shainv System. PV: Bonus Program - Phase 1 Report. Volume 1  

SciTech Connect

This report summarizes the work performed by Delmarva Power and Light and its subcontractors in Phase 1 of the US Department of Energy's PV:BONUS Program. The purpose of the program is to develop products and systems for buildings which utilize photovoltaic (N) technology. Beginning with a cooperative research effort with the University of Delaware's Center for Energy and Environmental Policy Research Delmarva Power developed and demonstrated the concept of Dispatchable PV Peak Shaving. This concept and the system which resulted horn the development work are unique from other grid-connected PV systems because it combines a PV, battery energy storage, power conversion and control technologies into an integrated package. Phase 1 began in July 1993 with the installation of a test and demonstration system at Delmarva's Northern Division General Office building near Newark, Delaware. Following initial testing throughout the summer and fall of 1993, significant modifications were made under an amendment to the DOE contract. Work on Phase 1 concluded in the early spring of 1995. Significant progress towards the goal of commercializing the system was made during Phase 1, and is summarized. Based on progress in Phase 1, a proposal to continue the work in Phase 2 was submitted to the US DOE in May 1995. A contract amendment and providing funds for the Phase 2 work is expected in July 1995.

None

1995-10-01T23:59:59.000Z

383

The information published in this Open Learning program handbook outlines information for the 2009-2010 academic year, including the  

E-Print Network (OSTI)

contained in this handbook. In addition, the publication of information in this handbook does not bindDisclaimer The information published in this Open Learning program handbook outlines information interruption in, or cancellation of, any academic activities as set forth in this handbook and related

Matsakis, Pascal

384

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 4.0 Systems Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Analysis Systems Analysis Multi-Year Research, Development and Demonstration Plan Page 4 - 1 4.0 Systems Analysis The Fuel Cell Technologies Program (FCT Program) conducts a coordinated, comprehensive effort in modeling and analysis to clarify where hydrogen and fuel cells can be most effective from an economic, environmental, and energy security standpoint, as well as to guide RD&D priorities and set program goals. These activities support the FCT Program's decision- making process by evaluating technologies and pathways and determining technology gaps, risks, and benefits. The Systems Analysis sub-program works at all levels of the program, including technology analysis for specific sub-programs, policy and infrastructure analysis, and high-level implementation and

385

Development and implementation of a pipeline integrity management program in Russia  

SciTech Connect

The operating integrity of several Russian gas pipelines is recognized to be at a near critical condition. A series of inter related questions are addressed to assess the continuing operating integrity (remaining useful life) of these pipelines based on both theoretical analyzes and inspection data. The program serves to plan and allocate resources for pipeline repair or replacement activities. The analyses considers construction methods, applied loads and pipeline materials in developing criteria for remaining life assessment. Several analytical methods are reviewed and used to evaluate the remaining operating life of two pipeline systems.

Kharionovski, V.V. [VNIIGAZ, Moscow (Russian Federation)

1995-12-31T23:59:59.000Z

386

Results from two workshops: Developing and amending regulations and funding state radiation control programs  

SciTech Connect

The first section of this document presents the results of a technical workshop on the process of regulations development and amendment sponsored by the Nuclear Regulatory Commission (NRC). This workshop focused on methods for reducing the time it takes to promulgate regulations to help those States that are having difficulty meeting the three-year deadline for adopting new NRC regulations. Workshop participants responded to six questions, reviewed the procedures used by various States for revising and adopting changes to their regulations, and reviewed the time-flow charts used by various States. This workshop was designed to provide guidance to States that are promulgating and revising regulations. The second section of this document summarizes the proceedings of a technical workshop, also sponsored by the NRC, on funding radiation control programs that emphasized fee schedules and effective strategies for the 1990s. This workshop focused on determining the true costs of running a program, on setting realistic fees for the various categories of licenses, and on the most efficient methods for sending invoices, recording receipts, depositing money received, and issuing licenses. Workshop participants responded to seven questions; reviewed the methods various States use to determine true costs; reviewed the procedure that the various States use to produce invoices and licenses; reviewed the procedures that the States are required to abide by when they receive money; and reviewed the method used by the NRC to determine the cost of its various programs.

Parker, G.

1993-09-01T23:59:59.000Z

387

Technical Support for China's Village Electrification Program: Cooperative Research and Development Final Report, CRADA number CRD-07-00235  

SciTech Connect

This work has two main goals: First, it provides for the analysis of data collected from systems developed in the previous phase of China's rural power program, the Township Electrification Program Second, it will comprise joint IEE-NREL work in support of the upcoming phase, 'Electrification of Unelectrified Areas'.

Kline, D.

2010-07-01T23:59:59.000Z

388

Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan- Section 6.0 Program Management  

Energy.gov (U.S. Department of Energy (DOE))

Program Management section of the Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan; updated August 2012. This plan includes goals, objectives, technical targets, tasks, and schedules for the Office of Energy Efficiency and Renewable Energy's contribution to the DOE Hydrogen and Fuel Cells Program.

389

Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan- Section 2.0 Program Benefits  

Energy.gov (U.S. Department of Energy (DOE))

Program Benefits section of the Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan; updated August 2012. This plan includes goals, objectives, technical targets, tasks, and schedules for the Office of Energy Efficiency and Renewable Energy's contribution to the DOE Hydrogen and Fuel Cells Program.

390

2005 Conference Proceedings: SECA Core Technology Program Peer Review  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Peer Review Program Peer Review October 25-26, 2005 Table of Contents Disclaimer Papers and Presentations Materials Modeling & Simulation Balance of Plant Cell Components Breakout Sections Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

391

Advanced emissions control development program. Quarterly technical progress report No. 9, October 1--December 31, 1996  

SciTech Connect

Babcock & Wilcox (B&W) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U.S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emission compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using B&W`s new Clean Environment Development Facility (CEDF) wherein air toxics emission control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species hydrogen chloride and hydrogen fluoride.

Evans, A.P.

1996-12-31T23:59:59.000Z

392

Presentation to the EAC - NSF Workforce Development Related Activities and Programs - Barbara Kenny  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NSF Workforce Development NSF Workforce Development Related Activities and Programs Barbara Kenny June 11, 2012 NSF Mission and Vision * Mission: From the NSF Act of 1950: ..."To promote the progress of science; to advance the national health, prosperity, and welfare; to secure the national defense...." * Vision: NSF envisions a nation that capitalizes on new concepts in science and engineering and provides global leadership in advancing research and education $B * ARRA ? 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 2005 2006 2007 2008 2009 2010 2011 2012 2013 Request Actual Fiscal Year NSF Budget Mathematical & Physical Sciences (MPS) Geosciences (GEO) Engineering (ENG) Computer & Information Science & Engineering (CISE) Biological Sciences (BIO) Office of the Inspector General (OIG)

393

Colorado State University program for developing, testing, evaluating and optimizing solar heating and cooling systems  

SciTech Connect

The objective is to develop and test various integrated solar heating, cooling and domestic hot water systems, and to evaluate their performance. Systems composed of new, as well as previously tested, components are carefully integrated so that effects of new components on system performance can be clearly delineated. The SEAL-DOE program includes six tasks which have received funding for the 1991--92 fifteen-month period. These include: (1) a project employing isothermal operation of air and liquid solar space heating systems, (2) a project to build and test several generic solar water heaters, (3) a project that will evaluate advanced solar domestic hot water components and concepts and integrate them into solar domestic hot water systems, (4) a liquid desiccant cooling system development project, (5) a project that will perform system modeling and analysis work on solid desiccant cooling systems research, and (6) a management task. The objectives and progress in each task are described in this report.

Not Available

1992-03-23T23:59:59.000Z

394

Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995  

SciTech Connect

This report summarizes the tasks completed under this project during the period from August 1, 1994 through July 31, 1994. The objective of the study is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized by the year 2000. The tasks completed include a market study for the advanced turbine system; definition of an optimized recuperated gas turbine as the prime mover meeting the requirements of the market study and whose characteristics were, in turn, used for forecasting the total advanced turbine system (ATS) future demand; development of a program plan for bringing the ATS to a state of readiness for field test; and demonstration of the primary surface recuperator ability to provide the high thermal effectiveness and low pressure loss required to support the proposed ATS cycle.

NONE

1995-11-01T23:59:59.000Z

395

Naval Research Laboratory`s programs in advanced indium phosphide solar cell development  

SciTech Connect

The Naval Research Laboratory has been involved in developing InP solar cell technology since 1988. The purpose of these programs was to produce advanced cells for use in very high radiation environments, either as a result of operating satellites in the Van Allen belts or for very long duration missions in other orbits. Richard Statler was technical representative on the first program, with Spire Corporation as the contractor, which eventually produced several hundred, high efficiency 2 x 2 sq cm single crystal InP cells. The shallow homojunction technology which was developed in this program enabled cells to be made with AMO, one sun efficiencies greater than 19%. Many of these cells have been flown on space experiments, including PASP Plus, which have confirmed the high radiation resistance of InP cells. NRL has also published widely on the radiation response of these cells and also on radiation-induced defect levels detected by DLTS, especially the work of Rob Walters and Scott Messenger. In 1990 NRL began another Navy-sponsored program with Tim Coutts and Mark Wanlass at the National Renewable Energy Laboratory (NREL), to develop a one sun, two terminal space version of the InP-InGaAs tandem junction cell being investigated at NREL for terrestrial applications. These cells were grown on InP substrates. Several cells with AMO, one sun efficiencies greater than 22% were produced. Two 2 x 2 sq cm cells were incorporated on the STRV lA/B solar cell experiment. These were the only two junction, tandem cells on the STRV experiment. The high cost and relative brittleness of InP wafers meant that if InP cell technology were to become a viable space power source, the superior radiation resistance of InP would have to be combined with a cheaper and more robust substrate. The main technical challenge was to overcome the effect of the dislocations produced by the lattice mismatch at the interface of the two materials.

Summers, G.P.

1995-10-01T23:59:59.000Z

396

The Employee Stress and Alcohol Project: The development of a computer-based alcohol abuse prevention program for employees  

Science Journals Connector (OSTI)

The Employee Stress and Alcohol Project (ESAP) developed an interactive computer-based alcohol abuse prevention and early intervention program accessible to employees over the Internet. Behavioral health research...

Robert A. Matano Ph.D.

2000-05-01T23:59:59.000Z

397

Curriculum development of a wildlife habitat gardening Golden Ray Series [sm] for the Junior Master Gardener [sm] Program  

E-Print Network (OSTI)

Development of the Backyard Buddies Golden Ray Series curriculum for the Junior Master Gardener Program is a labor-intensive and ongoing project requiring consideration of numerous factors relating not only to the habitat gardening subject matter...

Meche, Michelle S

2001-01-01T23:59:59.000Z

398

Advanced turbine systems program -- Conceptual design and product development. Final report  

SciTech Connect

This Final Technical Report presents the accomplishments on Phase 2 of the Advanced Turbine Systems (ATS). The ATS is an advanced, natural gas fired gas turbine system that will represent a major advance on currently available industrial gas turbines in the size range of 1--20 MW. This report covers a market-driven development. The Market Survey reported in Section 5 identified the customer`s performance needs. This market survey used analyses performed by Solar turbine Incorporated backed up by the analyses done by two consultants, Research Decision Consultants (RDC) and Onsite Energy Corporation (Onsite). This back-up was important because it is the belief of all parties that growth of the ATS will depend both on continued participation in Solar`s traditional oil and gas market but to a major extent on a new market. This new market is distributed electrical power generation. Difficult decisions have had to be made to meet the different demands of the two markets. Available resources, reasonable development schedules, avoidance of schedule or technology failures, probable acceptance by the marketplace, plus product cost, performance and environmental friendliness are a few of the complex factors influencing the selection of the Gas Fired Advanced Turbine System described in Section 3. Section 4 entitled ``Conversion to Coal`` was a task which addresses the possibility of a future interruption to an economic supply of natural gas. System definition and analysis is covered in Section 6. Two major objectives were met by this work. The first was identification of those critical technologies that can support overall attainment of the program goals. Separate technology or component programs were begun to identify and parameterize these technologies and are described in Section 7. The second objective was to prepare parametric analyses to assess performance sensitivity to operating variables and to select design approaches to meet the overall program goals.

NONE

1996-07-26T23:59:59.000Z

399

NREL Develops Diagnostic Test Cases to Improve Building Energy Simulation Programs (Fact Sheet)  

SciTech Connect

This technical highlight describes NREL research to develop a set of diagnostic test cases for building energy simulations in order to achieve more accurate energy use and savings predictions. The National Renewable Energy Laboratory (NREL) Residential and Commercial Buildings research groups developed a set of diagnostic test cases for building energy simulations. Eight test cases were developed to test surface conduction heat transfer algorithms of building envelopes in building energy simulation programs. These algorithms are used to predict energy flow through external opaque surfaces such as walls, ceilings, and floors. The test cases consist of analytical and vetted numerical heat transfer solutions that have been available for decades, which increases confidence in test results. NREL researchers adapted these solutions for comparisons with building energy simulation results. Testing the new cases with EnergyPlus identified issues with the conduction finite difference (CondFD) heat transfer algorithm in versions 5 and 6. NREL researchers resolved these issues for EnergyPlus version 7. The new test cases will help users and developers of EnergyPlus and other building energy tools to identify and fix problems associated with solid conduction heat transfer algorithms of building envelopes and their boundary conditions. In the long term, improvements to software algorithms will result in more accurate energy use and savings predictions. NREL researchers plan to document the set of test cases and make them available for future consideration by validation standards such as ASHRAE Standard 140: Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs. EnergyPlus users will also have access to the improved CondFD model in version 7 after its next scheduled release.

Not Available

2011-12-01T23:59:59.000Z

400

Transverse emittance and phase space program developed for use at the Fermilab A0 Photoinjector  

SciTech Connect

The Fermilab A0 Photoinjector is a 16 MeV high intensity, high brightness electron linac developed for advanced accelerator R&D. One of the key parameters for the electron beam is the transverse beam emittance. Here we report on a newly developed MATLAB based GUI program used for transverse emittance measurements using the multi-slit technique. This program combines the image acquisition and post-processing tools for determining the transverse phase space parameters with uncertainties. An integral part of accelerator research is a measurement of the beam phase space. Measurements of the transverse phase space can be accomplished by a variety of methods including multiple screens separated by drift spaces, or by sampling phase space via pepper pots or slits. In any case, the measurement of the phase space parameters, in particular the emittance, can be drastically simplified and sped up by automating the measurement in an intuitive fashion utilizing a graphical interface. At the A0 Photoinjector (A0PI), the control system is DOOCS, which originated at DESY. In addition, there is a library for interfacing to MATLAB, a graphically capable numerical analysis package sold by The Mathworks. It is this graphical package which was chosen as the basis for a graphical phase space measurement system due to its combination of analysis and display capabilities.

Thurman-Keup, R.; Johnson, A.S.; Lumpkin, A.H.; Ruan, J.; /Fermilab

2011-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Major issues in research and development of computer-assisted instruction programs for Continuing Engineering Education  

Science Journals Connector (OSTI)

Financial and staffing pressures on tertiary educational institutions and rapidly advancing technologies have caused undergraduate course programs to become more difficult to deliver. With the ever increasing requirements from industry, engineering training is saturated with enormous numbers of new ideas and concepts. The majority of educators are increasingly inclined to face the challenge by placing more emphasis on continuing education. In addition efforts have been made to find more effective and reliable methods of instruction. The process of dissemination of information, through computer-assisted instructional material in many scholarly and extra-curricular activities, has been facilitated considerably by the advent of personal computers. This paper presents some of the important issues which should be taken into consideration when developing computer-assisted instruction programs for training purposes. Such undertakings require a comprehensive research infrastructure, which involves the investigation of several aspects of engineering education and industrial training. Generally, the paper concentrates on one specific approach to engineering training, emphasising its implications for Continuing Engineering Education, but also endeavours to show the application of this method to engineering training in the context of rapidly advancing technology. In an attempt to paint the entire picture, the paper discusses the engineering education structure, societal needs, future training requirements, political climate, and the entire environment within which to operate. In addition, some examples of educational research and developments are demonstrated and discussed.

Zenon J. Pudlowski

1990-01-01T23:59:59.000Z

402

A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report  

SciTech Connect

A wide variety of experimental techniques have been used in this work, and many of these have been developed completely or improved significantly in the course of the research done during this program. Therefore, it is appropriate to describe these techniques in detail as a reference for future workers so that the techniques can be used in future work with little additional effort or so that the results reported from this program can be compared better with future results from other work. In many cases, the techniques described are for specific analytical instruments. It is recognized that these may be superseded by future developments and improvements in instrumentation if a complete description of techniques used successfully in the past on other instrumentation is available. The total pulping and liquor preparation research work performed included chip and white liquor preparation, digestion, pulp washing, liquor and wash recovery, liquor sampling, weak liquor concentration in two steps to about 45--50% solids with an intermediate soap skimming at about 140F and 27--30% solids, determination of pulp yield and Kappa number, determination of total liquor solids, and a check on the total material balance for pulping. All other research was performed either on a sample of the weak black liquor (the combined black liquor and washes from the digester) or on the skimmed liquor that had been concentrated.

Fricke, A.L.; Zaman, A.A.; Stoy, M.O.; Schmidl, G.W.; Dong, D.J.; Speck, B.

1998-04-01T23:59:59.000Z

403

Disclaimers | Critical Materials Institute  

NLE Websites -- All DOE Office Websites (Extended Search)

of the United States Government or Iowa State University, and shall not be used for advertising or product endorsements purposes. COPYRIGHT STATUS: Ames Laboratory authored...

404

Disclaimers | The Ames Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

of the United States Government or Iowa State University, and shall not be used for advertising or product endorsements purposes. COPYRIGHT STATUS: Ames Laboratory authored...

405

METALS DESIGN HANDBOOK DISCLAIMER  

Office of Scientific and Technical Information (OSTI)

1987. "Status Report on Creep-Rupture Tests of 2-114 Cr - 1 Mo Steel, Alloy 800H and Hastelloy X in Simulated HTGR-SCIC Helium," DOE-HTGR-85131, Rev. 0, August 1985. "HTGR Design...

406

Design and development : social empowerment and two community art programs in Brazil.  

E-Print Network (OSTI)

??This study examines how two community art programs in Brazil have empowered participants through art practice. The programs are contextualized historically and theoretically to address (more)

Brooks, Nicholas Charles

2011-01-01T23:59:59.000Z

407

Data Availability in Appliance Standards and Labeling Program Development and Evaluation  

E-Print Network (OSTI)

energy savings from a rebate program for compact fluorescentas CFL and refrigerator rebate programs. Custom approachesinstance, if 10,000 CFL rebates were cashed in, the range of

Romankiewicz, John

2014-01-01T23:59:59.000Z

408

Overview of the U.S. DOE Accident Tolerant Fuel Development Program  

SciTech Connect

The United States Fuel Cycle Research and Development Advanced Fuels Campaign has been given the responsibility to conduct research and development on enhanced accident tolerant fuels with the goal of performing a lead test assembly or lead test rod irradiation in a commercial reactor by 2022. The Advanced Fuels Campaign has defined fuels with enhanced accident tolerance as those that, in comparison with the standard UO2-Zircaloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations and operational transients, as well as design-basis and beyond design-basis events. This paper provides an overview of the FCRD Accident Tolerant Fuel program. The ATF attributes will be presented and discussed. Attributes identified as potentially important to enhance accident tolerance include reduced hydrogen generation (resulting from cladding oxidation), enhanced fission product retention under severe accident conditions, reduced cladding reaction with high-temperature steam, and improved fuel-cladding interaction for enhanced performance under extreme conditions. To demonstrate the enhanced accident tolerance of candidate fuel designs, metrics must be developed and evaluated using a combination of design features for a given LWR design, potential improvements to that design, and the design of an advanced fuel/cladding system. The aforementioned attributes provide qualitative guidance for parameters that will be considered for fuels with enhanced accident tolerance. It may be unnecessary to improve in all attributes and it is likely that some attributes or combination of attributes provide meaningful gains in accident tolerance, while others may provide only marginal benefits. Thus, an initial step in program implementation will be the development of quantitative metrics. A companion paper in these proceedings provides an update on the status of establishing these quantitative metrics for accident tolerant LWR fuel.1 The United States FCRD Advanced Fuels Campaign has embarked on an aggressive schedule for development of enhanced accident tolerant LWR fuels. The goal of developing such a fuel system that can be deployed in the U.S. LWR fleet in the next 10 to 20 years supports the sustainability of clean nuclear power generation in the United States.

Jon Carmack; Frank Goldner; Shannon M. Bragg-Sitton; Lance L. Snead

2013-09-01T23:59:59.000Z

409

Core materials development for the fuel cycle R&D program  

SciTech Connect

The Fuel Cycle Research and Development program is investigating methods of burning minor actinides in a transmutation fuel. One of the challenges of achieving this goal is to develop fuels capable of reaching extreme burnup levels (e.g. 40%). To achieve such high burnup levels fast reactor core materials (cladding and duct) must be able to withstand very high doses (>300 dpa design goal) while in contact with the coolant and the fuel. Thus, these materials must withstand radiation effects that promote low temperature embrittlement, radiation induced segregation, high temperature helium embrittlement, swelling, accelerated creep, corrosion with the coolant, and chemical interaction with the fuel (FCCI). To develop and qualify materials to a total fluence greater than 200 dpa requires development of advanced alloys and irradiations in fast reactors to test these alloys. Test specimens of ferritic/martensitic alloys (T91/HT-9) previously irradiated in the FFTF reactor up to 210 dpa at a temperature range of 350 750 C are presently being tested. This includes analysis of a duct made of HT-9 after irradiation to a total dose of 155 dpa at temperatures from 370 to 510 C. Compact tension, charpy and tensile specimens have been machined from this duct and mechanical testing as well as SANS and Mossbauer spectroscopy are currently being performed. Initial results from compression testing and Charpy testing reveal a strong increase in yield stress (400 MPa) and a large increase in DBTT (up to 230 C) for specimens irradiated at 383 C to a dose of 28 dpa. Less hardening and a smaller increase in DBTT was observed for specimens irradiated at higher temperatures up to 500 C. Advanced radiation tolerant materials are also being developed to enable the desired extreme fuel burnup levels. Specifically, coatings are being developed to minimize FCCI, and research is underway to fabricate large heats of radiation tolerant oxide dispersion steels with homogeneous oxide dispersions.

Toloczko, M [Pacific Northwest National Laboratory (PNNL); Maloy, S [Los Alamos National Laboratory (LANL); Cole, James I. [Idaho National Laboratory (INL); Byun, Thak Sang [ORNL

2011-01-01T23:59:59.000Z

410

Core Materials Development for the Fuel Cycle R&D Program  

SciTech Connect

The Fuel Cycle Research and Development program is investigating methods of burning minor actinides in a transmutation fuel. One of the challenges of achieving this goal is to develop fuels capable of reaching extreme burnup levels (e.g. 40%). To achieve such high burnup levels fast reactor core materials (cladding and duct) must be able to withstand very high doses (greater than 300 dpa design goal) while in contact with the coolant and the fuel. Thus, these materials must withstand radiation effects that promote low temperature embrittlement, radiation induced segregation, high temperature helium embrittlement, swelling, accelerated creep, corrosion with the coolant, and chemical interaction with the fuel (FCCI). To develop and qualify materials to a total fluence greater than 200 dpa requires development of advanced alloys and irradiations in fast reactors to test these alloys. Test specimens of ferritic/martensitic alloys (T91/HT-9) previously irradiated in the FFTF reactor up to 210 dpa at a temperature range of 350-750 C are presently being tested. This includes analysis of a duct made of HT-9 after irradiation to a total dose of 155 dpa at temperatures from 370 to 510 C. Compact tension, charpy and tensile specimens have been machined from this duct and mechanical testing as well as SANS and Mossbauer spectroscopy are currently being performed. Initial results from compression testing and Charpy testing reveal a strong increase in yield stress ({approx}400 MPa) and a large increase in DBTT (up to 230 C) for specimens irradiated at 383 C to a dose of 28 dpa. Less hardening and a smaller increase in DBTT was observed for specimens irradiated at higher temperatures up to 500 C. Advanced radiation tolerant materials are also being developed to enable the desired extreme fuel burnup levels. Specifically, coatings are being developed to minimize FCCI, and research is underway to fabricate large heats of radiation tolerant oxide dispersion steels with homogeneous oxide dispersions.

S. A. Maloy; M. Toloczko; J. Cole; T. S. Byun

2011-08-01T23:59:59.000Z

411

Energy Research and Development Division FINAL PROJECT REPORT  

E-Print Network (OSTI)

Energy Research and Development Division FINAL PROJECT REPORT INTEGRATING BUILDING COMMISSIONING DISCLAIMER This report was prepared as the result of work sponsored by the California Energy Commission rights. This report has not been approved or disapproved by the California Energy Commission nor has

412

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 5.0 Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 3.8 Page 3.8 2012 Systems Integration Multi-Year Research, Development and Demonstration Plan Page 5 - 1 5.0 Systems Integration The Systems Integration function of the DOE Hydrogen and Fuel Cells Program (the Program) provides independent, strategic, systems-level expertise and processes to enable system-level planning, data-driven decision-making, effective portfolio management, and program integration. System Integration ensures that system-level targets are developed, verified, and met and that the sub- programs are well-coordinated. Systems Integration provides tailored technical and programmatic support to ensure a disciplined approach to the research, design, development, and validation of complex systems. Systems Integration provides

413

Laboratory Directed Research and Development Program FY 2009 for Lawrence Berkeley National Laboratory  

E-Print Network (OSTI)

and Nuclear Security (unclassified fundamental research that supports stockpile safety and nonproliferation programs).

Hansen, Todd C.

2010-01-01T23:59:59.000Z

414

Calendar Life Studies of Advanced Technology Development Program Gen 1 Lithium Ion Batteries  

SciTech Connect

This report presents the test results of a special calendar-life test conducted on 18650-size, prototype, lithium-ion battery cells developed to establish a baseline chemistry and performance for the Advanced Technology Development Program. As part of electrical performance testing, a new calendar-life test protocol was used. The test consisted of a once-per-day discharge and charge pulse designed to have minimal impact on the cell yet establish the performance of the cell over a period of time such that the calendar life of the cell could be determined. The calendar life test matrix included two states of charge (i.e., 60 and 80%) and four temperatures (40, 50, 60, and 70C). Discharge and regen resistances were calculated from the test data. Results indicate that both discharge and regen resistance increased nonlinearly as a function of the test time. The magnitude of the discharge and regen resistance depended on the temperature and state of charge at which the test was conducted. The calculated discharge and regen resistances were then used to develop empirical models that may be useful to predict the calendar life or the cells.

Wright, Randy Ben; Motloch, Chester George

2001-03-01T23:59:59.000Z

415

Cycle Life Studies of Advanced Technology Development Program Gen 1 Lithium Ion Batteries  

SciTech Connect

This report presents the test results of a special calendar-life test conducted on 18650-size, prototype, lithium-ion battery cells developed to establish a baseline chemistry and performance for the Advanced Technology Development Program. As part of electrical performance testing, a new calendar-life test protocol was used. The test consisted of a once-per-day discharge and charge pulse designed to have minimal impact on the cell yet establish the performance of the cell over a period of time such that the calendar life of the cell could be determined. The calendar life test matrix included two states of charge (i.e., 60 and 80%) and four temperatures (40, 50, 60, and 70C). Discharge and regen resistances were calculated from the test data. Results indicate that both discharge and regen resistance increased nonlinearly as a function of the test time. The magnitude of the discharge and regen resistance depended on the temperature and state of charge at which the test was conducted. The calculated discharge and regen resistances were then used to develop empirical models that may be useful to predict the calendar life or the cells.

Wright, Randy Ben; Motloch, Chester George

2001-03-01T23:59:59.000Z

416

Laser safety training programs for a large and diverse research and development laboratory  

SciTech Connect

Sandia National Laboratories is a large multiprogram Research and Development laboratory which is operated by a contractor for the US Department of Energy. In the Laboratories, lasers are both the subject of research and the tools that are used in other research, development, and testing activities. Since 1979, laser safety training has been the primary focus of the Laboratories` laser safety program. Approximately 1 100 personnel have been trained in formal courses during that time period. The formal course, presented on site by a contractor, consists of two full days of instruction. The course contents include the following topics: Laser technology and safety overview; Federal and ANSI laser standards summaries; Biological effects of laser radiation; Classification of lasers; Laser hazard analysis; Review of ANSI Z136.1 control measures; Laser eye protection. Recent emphasis on regulatory requirements, conduct of operations, and quality management has revealed a need to change the laser safety training curriculum. A new course for users of low power lasers (Class 2 and 3a) is being developed. A refresher course, a management awareness (self-study) course, and major changes in the current course are planned.

Stocum, W.E.

1992-12-31T23:59:59.000Z

417

Hanford Site Long-term Surface Barrier Development Program: Fiscal year 1994 highlights  

SciTech Connect

The Hanford Site Surface Barrier Development Program was organized in 1985 to test the effectiveness of various barrier designs in minimizing the effects of water infiltration; plant, animal and human intrusion; and wind and water erosion on buried wastes, plus preventing or minimizing the emanation of noxious gases. A team of scientists from the Pacific Northwest Laboratory (PNL) and engineers from Westinghouse Hanford Company (WHC) direct the barrier development effort. ICF Kaiser Hanford Company, in conjunction with WHC and PNL, developed design drawings and construction specifications for a 5-acre prototype barrier. The highlight of efforts in FY 1994 was the construction of the prototype barrier. The prototype barrier was constructed on the Hanford Site at the 200 BP-1 Operable Unit of the 200 East Area. Construction was completed in August 1994 and monitoring instruments are being installed so experiments on the prototype barrier can begin in FY 1995. The purpose of the prototype barrier is to provide insights and experience with issues regarding barrier design, construction, and performance that have not been possible with individual tests and experiments conducted to date. Additional knowledge and experience was gained in FY 1994 on erosion control, physical stability, water infiltration control, model testing, Resource Conservation and Recovery Act (RCRA) comparisons, biointrusion control, long-term performance, and technology transfer.

Petersen, K.L.; Link, S.O.; Gee, G.W.

1995-08-01T23:59:59.000Z

418

Light Water Reactor Sustainability Program Status of Silicon Carbide Joining Technology Development  

SciTech Connect

Advanced, accident tolerant nuclear fuel systems are currently being investigated for potential application in currently operating light water reactors (LWR) or in reactors that have attained design certification. Evaluation of potential options for accident tolerant nuclear fuel systems point to the potential benefits of silicon carbide (SiC) relative to Zr-based alloys, including increased corrosion resistance, reduced oxidation and heat of oxidation, and reduced hydrogen generation under steam attack (off-normal conditions). If demonstrated to be applicable in the intended LWR environment, SiC could be used in nuclear fuel cladding or other in-core structural components. Achieving a SiC-SiC joint that resists corrosion with hot, flowing water, is stable under irradiation and retains hermeticity is a significant challenge. This report summarizes the current status of SiC-SiC joint development work supported by the Department of Energy Light Water Reactor Sustainability Program. Significant progress has been made toward SiC-SiC joint development for nuclear service, but additional development and testing work (including irradiation testing) is still required to present a candidate joint for use in nuclear fuel cladding.

Shannon M. Bragg-Sitton

2013-09-01T23:59:59.000Z

419

Component Standard Research and Development - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report Robert Burgess (Primary Contact), William Buttner, Matthew Post, Carl Rivkin, Chad Blake National Renewable Energy Laboratory (NREL) 15013 Denver West Parkway Golden, CO 80401 Phone: (303) 275-3823 Email: robert.burgess@nrel.gov DOE Manager HQ: Antonio Ruiz Phone: (202) 586-0729 Email: Antonio.Ruiz@ee.doe.gov Subcontractor: SAE International, Troy, MI Project Start Date: Fiscal Year (FY) 2008 Project End Date: Project continuation and direction determined annually by DOE Fiscal Year (FY) 2012 Objectives Support development of new codes and standards * required for commercialization of hydrogen technologies. Create code language that is based on the latest scientific *

420

Evaluation of the Benefits Attributable to Automotive Lightweight Materials Program Research and Development Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

-237 -237 Evaluation of the Benefits Attributable to Automotive Lightweight Materials Program Research and Development Projects November 2001 Prepared by Sujit Das Oak Ridge National Laboratory Jean H. Peretz The University of Tennessee Bruce Tonn Oak Ridge National Laboratory DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via the U.S. Department of Energy (DOE) Information Bridge: Web site: http://www.osti.gov/bridge Reports produced before January 1, 1996, may be purchased by members of the public from the following source: National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Telephone: 703-605-6000 (1-800-553-6847) TDD: 703-487-4639 Fax: 703-605-6900 E-mail: info@ntis.fedworld.gov Web site: http://www.ntis.gov/support/ordernowabout.htm

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Hot Dry Rock Geothermal Energy Development Program Annual Report Fiscal Year 1988  

SciTech Connect

The complete list of HDR objectives is provided in Reference 10, and is tabulated below in Tables 1 and 2 for the reader's convenience. The primary, level 1, objective for HDR is ''to improve the technology to the point where electricity could be produced commercially from a substantial number of known HDR resource sites in a cost range of 5 to 8 cents/kWh by 1997''. A critically important milestone in attaining this cost target is the level II objective: ''Evaluate the performance of the Fenton Hill Phase II reservoir''. To appreciate the significance of this objective, a brief background is helpful. During the past 14 years the US DOE has invested $123 million to develop the technology required to make Hot Dry Rock geothermal energy commercially useful. The Governments of Japan and the Federal Republic of Germany have contributed an additional $32 million to the US program. The initial objectives of the program were met by the successful development and long-term operation of a heat-extraction loop in hydraulically-fractured hot dry rock. This Phase I reservoir produced pressurized hot water at temperatures and flow rates suitable for many commercial uses such as space heating and food processing. It operated for more than a year with no major problems or detectable environmental effect. With this accomplished and the technical feasibility of HDR energy systems demonstrated, the program undertook the more difficult task of developing a larger, deeper, hotter reservoir, called ''Phase II'', capable of supporting pilot-plant-scale operation of a commercial electricity-generating power plant. As described earlier in ''History of Research'', such a system was created and operated successfully in a preliminary 30-day flow test. However, to justify capital investment in HDR geothermal technology, industry now requires assurance that the reservoir can be operated for a long time without major problems or a significant decrease in the rate and quality of energy production. Industrial advisors to the HDR Program have concluded that, while a longer testing period would certainly be desirable, a successful and well-documented flow test of this high-temperature, Phase II reservoir lasting at least one year should convince industry that HDR geothermal energy merits their investment in its commercial development. This test is called the Long Term Flow Test (LTFT), and its completion will be a major milestone in attaining the Level 1 objective. However, before the LTFT could be initiated, well EE-2 had to be repaired, as also briefly described in the ''History of Research''. During this repair operation, superb progress was made toward satisfying the next most critically important Level II objective: Improve the Performance of HDR Drilling and Completion Technology. During the repair of EE-2, Los Alamos sidetracked by drilling out of the damaged well at 2.96 km (9700 ft), and then completed drilling a new-wellbore (EE-2A) to a total depth of 3.78 km (12,360 ft). As a consequence of this drilling experience, Los Alamos believes that if the original wells were redrilled today their combined cost would be only $8 million rather than the $18.8 million actually spent (a 60% cost saving). Further details, particularly of the completion of the well, can be found in the major section, ACCOMPLISHMENTS, but it can be seen that the second, Level II objective is already nearing attainment.

Dash, Zora V.; Murphy, Hugh D.; Smith, Morton C.

1988-01-01T23:59:59.000Z

422

ORNL/PPA-2010/1 Laboratory Directed Research and Development Program  

NLE Websites -- All DOE Office Websites (Extended Search)

10/1 10/1 Laboratory Directed Research and Development Program FY 2009 Annual Report DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via the U.S. Department of Energy (DOE) Information Bridge. Web site http://www.osti.gov/bridge Reports produced before January 1, 1996, may be purchased by members of the public from the following source. National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Telephone 703-605-6000 (1-800-553-6847) TDD 703-487-4639 Fax 703-605-6900 E-mail info@ntis.gov Web site http://www.ntis.gov/support/ordernowabout.htm Reports are available to DOE employees, DOE contractors, Energy Technology Data Exchange (ETDE) representatives, and International Nuclear Information System (INIS) representatives from

423

Advanced turbine systems program conceptual design and product development. Quarterly report, February 1995--April 1995  

SciTech Connect

This Quarterly Technical Progress Report covers the period February 1, 1995, through April 30, 1995, for Phase II of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE contract No. DE-AC21-93MC30246. The objective of Phase II of the ATS Program is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. A secondary objective is to begin early development of technologies critical to the success of ATS. Tasks 1, 2, 3, 5, 6 and 7 of Phase II have been completed in prior quarters. Their results have been discussed in the applicable quarterly reports and in their respective topical reports. With the exception of Task 7, final editions of these topical reports have been submitted to the DOE. This quarterly report, then, addresses only Task 4 and the nine subtasks included in Task 8, {open_quotes}Design and Test of Critical Components.{close_quotes} These nine subtasks address six ATS technologies as follows: (1) Catalytic Combustion - Subtasks 8.2 and 8.5, (2) Recuperator - Subtasks 8.1 and 8.7, (3) Autothermal Fuel Reformer - Subtask 8.3, (4) High Temperature Turbine Disc - Subtask 8.4, (5) Advanced Control System (MMI) - Subtask 8.6, and (6) Ceramic Materials - Subtasks 8.8 and 8.9. Major technological achievements from Task 8 efforts during the quarter are as follows: (1) The subscale catalytic combustion rig in Subtask 8.2 is operating consistently at 3 ppmv of NO{sub x} over a range of ATS operating conditions. (2) The spray cast process used to produce the rim section of the high temperature turbine disc of Subtask 8.4 offers additional and unplanned spin-off opportunities for low cost manufacture of certain gas turbine parts.

Karstensen, K.W.

1995-07-01T23:59:59.000Z

424

Developing prototype indicators of value and costs added through public involvement programs  

SciTech Connect

As more managers realize that public input in public sector decision making is a given in the current political and social climate, many are turning to public involvement (PI) as a way to manage the input so that it is beneficial to their decisions and projects. Public involvement is starting to become a familiar way of doing business for the Department of Energy (DOE) and its contractors. DOE and contractors are still unclear about the value and costs that PI can provide to their projects. Proponents claim that PI increases the acceptability of project goals by increasing stakeholders knowledge about and involvement in decisions of importance to them. In spite of these assertions avowing the benefits of PI, proponents have not generated methods that demonstrate or provide evidence of the value added through incorporating PI into projects. As DOE and contract managers are increasingly directed to incorporate public input in their project planning and decision making, questions are beginning to surface about the value and costs of PI as a way to manage that input. There is a pressing need to document the value and costs of PI for the participants in these processes--the stakeholders--and to present this information to decision makers in a way that helps them assess the value and costs of managing public input through a PI program. This research project focuses on developing a series of indicators to assess the value and costs of using public involvement programs to manage public input in decision making processes. The dimensions of public involvement that participants perceive as adding value or costs to projects; and developing ways to measure those dimensions through social indicators and metrics of behavior are outlined.

Lach, D.; Hixson, P.; Silbernagel, M.; Branch, K.; Heerwagen, J.; Bradbury, J.

1995-01-01T23:59:59.000Z

425

Publications of the Fossil Energy Advanced Research and Technology Development Materials Program, April 1, 1991--March 31, 1993  

SciTech Connect

Objective of DOE's Fossil Energy Advanced Research and Technology Development Materials Program is to conduct research and development on materials for fossil energy applications, with focus on longer-term needs. The Program includes research aimed at a better understanding of materials behavior in fossil energy environments and on the development of new materials capable of substantial improvement in plant operations and reliability. Scope of the program addresses materials requirements for all fossil energy systems, including materials for coal preparation, coal liquefaction, coal gasification, heat engines and heat recovery, combustion systems, and fuel cells. Work on the Program is conducted at national and government laboratories, universities, and industrial research facilities. Research conducted on the Program is divided among the following areas: (1) ceramics, (2) new alloys, (3) corrosion research, and (4) program development and technology transfer. This bibliography covers the period of April 1, 1992, through March 31, 1993, and is a supplement to previous bibliographies in this series. The publications listed are limited to topical reports, open literature publications in refereed journals, full-length papers in published proceedings of conferences, full-length papers in unrefereed journals, and books and book articles.

Carlson, P.T. (comp.)

1993-01-01T23:59:59.000Z

426

Publications of the Fossil Energy Advanced Research and Technology Development Materials Program, April 1, 1991--March 31, 1993  

SciTech Connect

Objective of DOE`s Fossil Energy Advanced Research and Technology Development Materials Program is to conduct research and development on materials for fossil energy applications, with focus on longer-term needs. The Program includes research aimed at a better understanding of materials behavior in fossil energy environments and on the development of new materials capable of substantial improvement in plant operations and reliability. Scope of the program addresses materials requirements for all fossil energy systems, including materials for coal preparation, coal liquefaction, coal gasification, heat engines and heat recovery, combustion systems, and fuel cells. Work on the Program is conducted at national and government laboratories, universities, and industrial research facilities. Research conducted on the Program is divided among the following areas: (1) ceramics, (2) new alloys, (3) corrosion research, and (4) program development and technology transfer. This bibliography covers the period of April 1, 1992, through March 31, 1993, and is a supplement to previous bibliographies in this series. The publications listed are limited to topical reports, open literature publications in refereed journals, full-length papers in published proceedings of conferences, full-length papers in unrefereed journals, and books and book articles.

Carlson, P.T. [comp.

1993-05-01T23:59:59.000Z

427

Program  

Office of Scientific and Technical Information (OSTI)

Extremophiles 2004 Extremophiles 2004 5th International Conference on Extremophiles SEPTEMBER 19 -23, 2004 CAMBRIDGE, MARYLAND Extremophiles 2004 5th International Conference on Extremophiles © 2004, American Society for Microbiology 1752 N Street, N.W. Washington, DC 20036-2904 Phone: 202-737-3600 World Wide Web: www.asm.org All Rights Reserved Printed in the United States of America ISBN: 1-55581 324-0 TABLE OF CONTENTS General Information Scientific Program Abstracts for Oral Sessions Abstracts for Poster Sessions Index 4 10 18 42 144 4 ASM Conferences EXECUTIVE COMMITTEE Frank Robb, Chair University of Maryland Biotechnology Institute Michael W. Adams University of Georgia Koki Horikoshi Japan Agency for Marine-Earth Science and Technology Robert M. Kelly North Carolina State University Jennifer Littlechild

428

Dissimilar-weld failure analysis and development program. Volume 1. Executive summary. Final report  

SciTech Connect

Failure of dissimilar metal welds is a major cause of forced outage in fossil boilers. A research project was carried out to: Develop a clearer understanding of the underlying causes of dissimilar weld failures; develop a methodology for estimating the residual life of service welds; develop a critical discriminatory test to predict the relative performance of welds; and develop guidelines for improved-performance dissimilar welds. The research methodology included review of prior experience as well as evaluation of a large number of failed and unfailed welds obtained from boiler superheaters or reheaters. The evaluations included metallography, mechanical testing and boiler inspections; in many cases, tube loading histories at the dissimilar weld locations were estimated. This work resulted in a clearer understanding of the root cause of weld failures. Furthermore, a quantitative relationship was derived between failure susceptibility and weld metal ''system'' loads, cycles, and temperatures (all critical parameters in weld performance). Accelerated discriminatory tests, including a number of geometries and modes of stressing and thermal cycling, were examined. The shortest time to failure, good reproducibility, and the capability to control loads and monitor cracking were achieved in a test which involved applying four-point bending loads to internally pressurized full-size tubular specimens. Tests at 593/sup 0/C (1100/sup 0/F), which involved temperature cycling, had failure times of only 400 h for stainless-steel fillers and 1500 h for nickel-base fillers. Guidelines for improved welds were derived from all the program results. They include and offer guidance on the considerations of weld-filler selection, weld geometry, heat treatment, etc., in relation to expected service conditions and on locating DMWs to optimize service performance. 7 refs., 18 figs., 3 tabs.

Not Available

1985-11-01T23:59:59.000Z

429

Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly progress report, December 1, 1995--February 29, 1996  

SciTech Connect

This report describes the overall program status of the General Electric Advanced Gas Turbine Development program, and reports progress on three main task areas. The program is focused on two specific products: (1) a 70-MW class industrial gas turbine based on the GE90 core technology, utilizing a new air cooling methodology; and (2) a 200-MW class utility gas turbine based on an advanced GE heavy-duty machine, utilizing advanced cooling and enhancement in component efficiency. The emphasis for the industrial system is placed on cycle design and low emission combustion. For the utility system, the focus is on developing a technology base for advanced turbine cooling while achieving low emission combustion. The three tasks included in this progress report are on: conversion to a coal-fueled advanced turbine system, integrated program plan, and design and test of critical components. 13 figs., 1 tab.

NONE

1997-06-01T23:59:59.000Z

430

Development of program implementation, evaluation, and selection tools for household water treatment and safe storage systems in developing countries  

E-Print Network (OSTI)

Over the past six years, the MIT Department of Civil and Environmental Engineering's Master of Engineering program has undertaken various projects involved with the design and implementation of a wide range of household ...

Baffrey, Robert Michael Nuval, 1977-

2005-01-01T23:59:59.000Z

431

Department of Energy's Isotope Development and Production for Research and Applications Program's Fiscal Year 2009 Balance Sheet Audit, OAS-FS-12-08  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy's Isotope Department of Energy's Isotope Development and Production for Research and Applications Program's Fiscal Year 2009 Balance Sheet OAS-FS-12-08 March 2012 ISOTOPE DEVELOPMENT AND PRODUCTION FOR RESEARCH AND APPLICATIONS PROGRAM Fiscal Year 2009 Annual Report and Balance Sheet September 30, 2009 i UNITED STATES DEPARTMENT OF ENERGY ISOTOPE DEVELOPMENT AND PRODUCTION FOR RESEARCH AND APPLICATIONS PROGRAM Fiscal Year 2009 Annual Report and Balance Sheet Table of Contents Page Management's Discussion and Analysis 1 Isotope Program Overview 2 Isotope Program Funding 4 Isotope Program Performance 5 Financial Performance 6 Management Challenges and Significant Issues 7 Balance Sheet Limitations 7

432

Strategic Program Planning Lessons Learned in Developing the LTS S&T Roadmap  

SciTech Connect

Technology roadmapping is a strategic planning method used by companies to identify and plan the development of technologies necessary for new products. The U.S. Department of Energys Office of Environmental Management has used this same method to refine requirements and identify knowledge and tools needed for completion of defined missions. This paper describes the process of applying roadmapping to clarify mission requirements and identify enhancing technologies for the Long-Term Stewardship (LTS) of polluted sites after site cleanup has been completed. The nature of some contamination problems is such that full cleanup is not achievable with current technologies and some residual hazards remain. LTS maintains engineered contaminant barriers and land use restriction controls, and monitors residual contaminants until they no longer pose a risk to the public or the environment. Roadmapping was used to clarify the breadth of the LTS mission, to identify capability enhancements needed to improve mission effectiveness and efficiency, and to chart out the research and development efforts to provide those enhancements. This paper is a case study of the application of roadmapping for program planning and technical risk management. Differences between the planned and actual application of the roadmapping process are presented along with lessons learned. Both the process used and lessons learned should be of interest for anyone contemplating a similar technology based planning effort.

Duane Hanson; Brent Dixon; Gretchen Matthern

2003-07-01T23:59:59.000Z

433

Strategic Program Planning Lessons Learned In Developing The Long-Term Stewardship Science and Technology Roadmap  

SciTech Connect

Technology roadmapping is a strategic planning method used by companies to identify and plan the development of technologies necessary for new products. The U.S. Department of Energy's Office of Environmental Management has used this same method to refine requirements and identify knowledge and tools needed for completion of defined missions. This paper describes the process of applying roadmapping to clarify mission requirements and identify enhancing technologies for the Long-Term Stewardship (LTS) of polluted sites after site cleanup has been completed. The nature of some contamination problems is such that full cleanup is not achievable with current technologies and some residual hazards remain. LTS maintains engineered contaminant barriers and land use restriction controls, and monitors residual contaminants until they no longer pose a risk to the public or the environment. Roadmapping was used to clarify the breadth of the LTS mission, to identify capability enhancements needed to improve mission effectiveness and efficiency, and to chart out the research and development efforts to provide those enhancements. This paper is a case study of the application of roadmapping for program planning and technical risk management. Differences between the planned and actual application of the roadmapping process are presented along with lessons learned. Both the process used and lessons learned should be of interest for anyone contemplating a similar technology based planning effort.

Dixon, B.W.; Hanson, D.J.; Matthern, G.E.

2003-04-24T23:59:59.000Z

434

Development and Implementation of a Comprehensive Program to Deal with Canada's Nuclear Legacy Liabilities  

SciTech Connect

The Government of Canada nuclear legacy liabilities have resulted from 60 years of nuclear research and development (R and D) carried out on behalf of Canada by the National Research Council (1944 to 1952) and Atomic Energy of Canada Limited (AECL, 1952 to present). These liabilities are largely located at AECL research sites, and consist of shutdown research buildings (including several prototype and research reactors), a wide variety of buried and stored wastes, and contaminated lands. The shutdown buildings and contaminated lands need to be safely decommissioned to meet federal regulatory requirements, and long-term solutions need to be developed and implemented for management of the wastes. More than half of the liabilities are the result of Cold War activities during the 1940's, 50's and early 60's. The remaining liabilities stem from R and D for medical isotopes and nuclear reactor technology, as well as national science programs. About 70 percent of the liabilities are located at AECL's Chalk River Laboratories (CRL) in Ontario, and a further 20 percent are located at AECL's shutdown Whiteshell Laboratories in Manitoba. The remaining 10 percent relate largely to three shutdown prototype reactors in Ontario and Quebec, which were key to the developmental stage of Canada's CANDU reactor technology. The inventory of legacy waste includes spent fuel, high-level, intermediate-level and low-level solid and liquid radioactive waste, and wastes (largely contaminated soils) from site clean-up work across Canada. Most of the wastes are in raw, unconditioned form, and limited characterization information is available for the wastes generated in past decades. In many cases unique and potentially costly solutions will be required to recover, handle and process the wastes. In conclusion: the Government of Canada has initiated a program to deal with nuclear legacy liabilities dating back to the Cold War and the birth of nuclear technologies and medicine in Canada. The 5-year start-up phase will address immediate health, safety and environmental priorities, as well as provide the facilities, studies and plans required for subsequent phases. Over the next few years, the long-term strategy will be further developed and refined, and public consultations are planned to inform this work and decisions on the next phase of the strategy.

Brown, Peter; Metcalfe, Douglas; Blanchette, Marcia [Natural Resources Canada, 580 Booth Street, Ottawa, Ontario, K1A 0E4 (Canada); Dolinar, George; Halpenny, Steven; Purdy, Chris; Smith, David; Kupferschmidt, William [Atomic Energy of Canada Limited, Chalk River, Ontario, K0J 1J0 (Canada)

2008-01-15T23:59:59.000Z

435

Progress in the United States Liquid Metal Fast Breeder Reactor development program  

SciTech Connect

Determining the most-logical LMFBR program strategy that can bring the technology to a state of commercial readiness in a timely and cost-effective manner is discussed. Realizing the uncertainties in the need date for the LMFBR, an approach is described which will pursue a program during the next decade that builds on the existing program experience, and that will achieve results that provide the program flexibility to accommodate a range of commercial introduction dates.

Longenecker, J.R.

1981-01-01T23:59:59.000Z

436

Geothermal Technology Development Program annual progress report, October 1982-September 1983  

SciTech Connect

The program emphasizes research in rock penetration mechanics, fluid technology, borehold mechanics, diagnostics technology, and permeability enhancement.

Kelsey, J.R. (ed.)

1984-05-01T23:59:59.000Z

437

TECHNOLOGY PROGRAM PLAN  

NLE Websites -- All DOE Office Websites (Extended Search)

COMBUSTION SYSTEMS COMBUSTION SYSTEMS U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREfACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

438

TECHNOLOGY PROGRAM PLAN  

NLE Websites -- All DOE Office Websites (Extended Search)

SOLID OXIDE FUEL CELLS SOLID OXIDE FUEL CELLS U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREFACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

439

TECHNOLOGY PROGRAM PLAN  

NLE Websites -- All DOE Office Websites (Extended Search)

SEPTEMBER 2013 SEPTEMBER 2013 CARBON STORAGE U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREfACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

440

Office of Technology Development FY 1993 program summary: Office of Research and Development, Office of Demonstration, Testing and Evaluation. Revision 1  

SciTech Connect

This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT&E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT&E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT&E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section.

Not Available

1994-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs for Phase 2 of the Secure Power Systems Professional project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

53 53 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs for Phase 2 of the Secure Power Systems Professional project LR O'Neil TJ Vanderhorst, Jr MJ Assante J Januszewski, III DH Tobey R Leo TJ Conway K Perman August 2013 PNNL- 22653 Developing Secure Power Systems Professional Competence: Alignment and Gaps in Workforce Development Programs for Phase 2 of the Secure Power Systems Professional project LR O'Neil TJ Vanderhorst, Jr MJ Assante J Januszewski, III DH Tobey R Leo TJ Conway K Perman Contributors: SGC Panel Members August 2013 Prepared by: Pacific Northwest National Laboratory and

442

Disclaimer: This Sample CV was compiled from 6 different student pharmacists' activities to demonstrate formatting of various CV components. A single student's CV would not be expected to contain all of these activities. List section contents in reverse c  

E-Print Network (OSTI)

Disclaimer: This Sample CV was compiled from 6 different student pharmacists' activities@xxx.com ===================================================================== EDUCATION Month Yr ­ Present Skaggs School of Pharmacy and Pharmaceutical Sciences (SSPPS) University Skaggs School of Pharmacy & Pharmaceutical Sciences Year-Year Research Aspects of HIPAA Certification

Gleeson, Joseph G.

443

Results from the DOE Advanced Gas Reactor Fuel Development and Qualification Program  

SciTech Connect

Modular HTGR designs were developed to provide natural safety, which prevents core damage under all design basis accidents and presently envisioned severe accidents. The principle that guides their design concepts is to passively maintain core temperatures below fission product release thresholds under all accident scenarios. This level of fuel performance and fission product retention reduces the radioactive source term by many orders of magnitude and allows potential elimination of the need for evacuation and sheltering beyond a small exclusion area. This level, however, is predicated on exceptionally high fuel fabrication quality and performance under normal operation and accident conditions. Germany produced and demonstrated high quality fuel for their pebble bed HTGRs in the 1980s, but no U.S. manufactured fuel had exhibited equivalent performance prior to the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. The design goal of the modular HTGRs is to allow elimination of an exclusion zone and an emergency planning zone outside the plant boundary fence, typically interpreted as being about 400 meters from the reactor. To achieve this, the reactor design concepts require a level of fuel integrity that is better than that claimed for all prior US manufactured TRISO fuel, by a few orders of magnitude. The improved performance level is about a factor of three better than qualified for German TRISO fuel in the 1980s. At the start of the AGR program, without a reactor design concept selected, the AGR fuel program selected to qualify fuel to an operating envelope that would bound both pebble bed and prismatic options. This resulted in needing a fuel form that could survive at peak fuel temperatures of 1250C on a time-averaged basis and high burnups in the range of 150 to 200 GWd/MTHM (metric tons of heavy metal) or 16.4 to 21.8% fissions per initial metal atom (FIMA). Although Germany has demonstrated excellent performance of TRISO-coated UO2 particle fuel up to about 10% FIMA and 1150C, UO2 fuel is known to have limitations because of CO formation and kernel migration at the high burnups, power densities, temperatures, and temperature gradients that may be encountered in the prismatic modular HTGRs. With uranium oxycarbide (UCO) fuel, the kernel composition is engineered to prevent CO formation and kernel migration, which are key threats to fuel integrity at higher burnups, temperatures, and temperature gradients. Furthermore, the recent poor fuel performance of UO2 TRISO fuel pebbles measured in Chinese irradiation testing in Russia and in German pebbles irradiated at 1250C, and historic data on poorer fuel performance in safety testing of German pebbles that experienced burnups in excess of 10% FIMA [1] have each raised concern about the use of UO2 TRISO above 10% FIMA and 1150C and the degree of margin available in the fuel system. This continues to be an active area of study internationally.

David Petti

2014-06-01T23:59:59.000Z

444

Simulated coal-gas-fueled molten carbonate fuel cell development program  

SciTech Connect

In previous work, International Fuel Cells Corporation (EFC) found interactions between molten carbonate fuel cell cathode materials being considered as replacements for the presently used nickel oxide and matrix materials. Consequently, this work was conducted to screen additional new materials for mutual compatibility. As part of this program, experiments were performed to examine the compatibility of several candidate, alternative cathode materials with the standard lithium aluminate matrix material in the presence of electrolyte at cell potentials. Initial cathode candidates were materials lithium ferrite, yttrium iron garnet, lithium manganite and doped ceria which were developed by universities, national laboratories, or contractors to DOE, EPRI, or GRI. These investigations were conducted in laboratory scale experiments. None of the materials tested can directly replace nickel oxide or indicate greater stability of cell performance than afforded by nickel oxide. Specifically: (1) no further work on niobium doped ceria is warranted; (2) cobalt migration was found in the lithium ferrite cathode tested. This could possibly lead to shorting problems similiar to those encountered with nickel oxide; (3) Possible shorting problems may also exist with the proprietary dopant in YIG; (4) lithium ferrite and YIG cathode were not single phase materials. Assessment of the chemical stability, i.e., dopant loss, was severely impeded by dissolution of these second phases in the electrolyte; and (5) Magnesium doped lithium manganite warrants further work. Electrolytes should contain Mg ions to suppress dopant loss.

Johnson, W.H.

1992-07-01T23:59:59.000Z

445

Simulated coal-gas-fueled molten carbonate fuel cell development program. Topical report: Cathode compatibility tests  

SciTech Connect

In previous work, International Fuel Cells Corporation (EFC) found interactions between molten carbonate fuel cell cathode materials being considered as replacements for the presently used nickel oxide and matrix materials. Consequently, this work was conducted to screen additional new materials for mutual compatibility. As part of this program, experiments were performed to examine the compatibility of several candidate, alternative cathode materials with the standard lithium aluminate matrix material in the presence of electrolyte at cell potentials. Initial cathode candidates were materials lithium ferrite, yttrium iron garnet, lithium manganite and doped ceria which were developed by universities, national laboratories, or contractors to DOE, EPRI, or GRI. These investigations were conducted in laboratory scale experiments. None of the materials tested can directly replace nickel oxide or indicate greater stability of cell performance than afforded by nickel oxide. Specifically: (1) no further work on niobium doped ceria is warranted; (2) cobalt migration was found in the lithium ferrite cathode tested. This could possibly lead to shorting problems similiar to those encountered with nickel oxide; (3) Possible shorting problems may also exist with the proprietary dopant in YIG; (4) lithium ferrite and YIG cathode were not single phase materials. Assessment of the chemical stability, i.e., dopant loss, was severely impeded by dissolution of these second phases in the electrolyte; and (5) Magnesium doped lithium manganite warrants further work. Electrolytes should contain Mg ions to suppress dopant loss.

Johnson, W.H.

1992-07-01T23:59:59.000Z

446

AISI/DOE Technology Roadmap Program: Development of Cost-effective, Energy-efficient Steel Framing  

SciTech Connect

Steel members in wall construction form a thermal bridge that interrupts the insulation layer of a wall. This causes higher rate of heat transfer by conduction through the wall framing than through other parts of the wall. One method to reduce the thermal bridging effect is to provide a break, such as insulating sheathing. A thermally efficient slit-web and stud was developed in this program to mitigate the conductivity of steel. The thermal performance of the slit-web stud was evaluated at Oak Ridge National Laboratory using hotbox testing. The thermal test results showed that the prototype slit-web stud performed 17% better than the solid-web stud, using R-13 fiber glass batts with exterior OSB sheathing and interior drywall. The structural behavior of this slit-web stud was evaluated in axial, bending, shear, shearwall, and stub-column tests. Test results indicated that the slitweb stud performed similarly or better than the solid-web stud in most structural performance characteristics investigated. Thus, the prototype slit-web stud has been shown to be thermally efficient, economiexecy viable, structurally sound, easily manufactured and usable in a range of residential installations.

Nader R. Elhajj

2003-01-06T23:59:59.000Z

447

Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, January 1, 1980-March 31, 1980  

SciTech Connect

Results are presented of work performed on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Included are the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described, including screening creep results and metallographic analysis for materials thermally exposed or tested at 750, 850, and 950/sup 0/C.

Not Available

1980-06-25T23:59:59.000Z

448

Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, July 1, 1979-September 30, 1979  

SciTech Connect

The results of work performed from July 1, 1979 through September 30, 1979 on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program are presented. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in this report includes the activities associated with the status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment. The status of the data management system is presented. In addition, the progress in the screening test program is described.

Not Available

1980-03-07T23:59:59.000Z

449

Development of the program EOD for design in electron and ion microscopy  

Science Journals Connector (OSTI)

The paper surveys new features of the EOD program, a complete workplace for the design of electron and ion microscopes. The extensions of the program for space charge computations, interaction with gases in the specimen chamber and misalignments are handled as plug-ins, keeping the program as a single unit. The current status of the tolerancing plug-in is described in more detail.

J. Zlmal; B. Lencov

2011-01-01T23:59:59.000Z

450

International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs  

E-Print Network (OSTI)

Appliance Manufacturers. 2010. AHAM Certification ProgramAppliance Manufacturers (AHAM) from its association members.trade associations such as AHAM and the Air Conditioning,

Zhou, Nan

2013-01-01T23:59:59.000Z

451

Developing, Staffing, and Overseeing a State Energy Savings Performance Contracting Program  

Energy.gov (U.S. Department of Energy (DOE))

U.S. Department of Energy (DOE) Technical Assistance Program (TAP) webinar held on March 26, 2013, dealing with energy savings performance contracting.

452

Development and Implementation of Degree Programs in Electric Drive Vehicle Technology  

Energy.gov (U.S. Department of Energy (DOE))

2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

453

Further Program Development for the Cost Minimizing Global Energy System Model GET-RC.  

E-Print Network (OSTI)

??The linear programming Global Energy Transition (GET) model covers the global energy system and is designed to meet exogenously given energy demand levels, subject to (more)

Andersson, Magnus

2013-01-01T23:59:59.000Z

454

Development of a Systemwide Predator Control Program, Section I : Northern Squawfish Management Program Implementation, 1994 annual report.  

SciTech Connect

The authors report the results from the forth year of a basinwide program to harvest northern squawfish (Ptychocheilus oregonensis) in an effort to reduce mortality due to northern squawfish predation on juvenile salmonids during their emigration from natal streams to the ocean. Earlier work in the Columbia River Basin suggested predation by northern squawfish on juvenile salmonids may account for most of the 10--20% mortality juvenile salmonids experience in each of eight Columbia and Snake River reservoirs. Modeling simulations based on work in John Day Reservoir from 1982 through 1988 indicated it is not necessary to eradicate northern squawfish to substantially reduce predation-caused mortality of juvenile salmonids. Instead, if northern squawfish were exploited at a 10--20% rate, reductions in numbers of larger, older fish resulting in restructuring of their population could reduce their predation on juvenile salmonids by 50% or more. Consequently, the authors designed and tested a sport-reward angling fishery and a commercial longline fishery in the John Day pool in 1990. They also conducted an angling fishery in areas inaccessible to the public at four dams on the mainstem Columbia River and at Ice Harbor Dam on the Snake River. Based on the success of these limited efforts, they implemented three test fisheries on a multi-pool, or systemwide, scale in 1991--a tribal longline fishery above Bonneville Dam, a sport-reward fishery, and a dam-angling fishery.

Willis, Charles F. (S.P. Cramer and Associates, Inc., Gresham, OR); Young, Franklin R. (Columbia Basin Fish and Wildlife Authority, Portland, OR)

1995-09-01T23:59:59.000Z

455

Role of a Transcriptional Regulator in Programmed Cell Death and Plant Development  

SciTech Connect

The long-term goal of this research is to understand the role(s) and molecular mechanisms of programmed cell death (PCD) in the controlling plant growth, development and responses to biotic and abiotic stress. We developed a genetic selection scheme to identify A. thaliana FB1-resistant (fbr) mutants as a way to find genes involved in PCD (Stone et al., 2000; Stone et al., 2005; Khan and Stone, 2008). The disrupted gene in fbr6 (AtSPL14) responsible for the FB1-insensitivity and plant architecture phenotypes encodes a plant-specific SBP DNA-binding domain transcriptional regulator (Stone et al., 2005; Liang et al., 2008). This research plan is designed to fill gaps in the knowledge about the role of SPL14 in plant growth and development. The work is being guided by three objectives aimed at determining the pathways in which SPL14 functions to modulate PCD and/or plant development: (1) determine how SPL14 functions in plant development, (2) identify target genes that are directly regulated by SPL14, and (3) identify SPL14 modifications and interacting proteins. We made significant progress during the funding period. Briefly, some major accomplishments are highlighted below: (1) To identify potential AtSPL14 target genes, we identified a consensus DNA binding site for the AtSPL14 SBP DNA-binding domain using systematic evolution of ligands by exponential selection (SELEX) and site-directed mutagenesis (Liang et al., 2008). This consensus binding site was used to analyze Affymetrix microarray gene expression data obtained from wild-type and fbr6 mutant plants to find possible AtSPL14-regulated genes. These candidate AtSPL14-regulated genes are providing new information on the molecular mechanisms linking plant PCD and plant development through modulation of the 26S proteasome. (2) Transgenic plants expressing epitope-tagged versions of AtSPL14 are being used to confirm the AtSPL14 targets (by ChIP-PCR) and further dissect the molecular interactions (Nazarenus, Liang and Stone, in preparation) (3) Double mutants generated between fbr6 and various accelerated cell death (acd) mutants indicate that sphingolipid metabolism is influenced by AtSPL14 and sphingolipidomics profiling supports this conclusion (Lin, Markham and Stone, in preparation). (4) A new set of phenotypes have been uncovered in the original fbr6-1 mutant, including a short-root phenotype related to auxin signaling and altered photosynthetic parameters related to stomatal density and conductance (Lin and Stone, in preparation; Lin, Madhavan and Stone, in preparation). Additional AtSPL14-related mutants and transgenic plants have been generated to effectively dissect the functions of AtSPL14, including a dominant negative fbr6-2 allele and transgenic plants overexpressing FBR6/AtSPL14 that display an accelerated cell death (acd) phenotype.

Julie M. Stone

2008-09-13T23:59:59.000Z

456

VOL. 31, No.6 UNL WATER CENTER/ENVIRONMENTAL PROGRAMS DECEMBER 1999 Conference to Develop a Management  

E-Print Network (OSTI)

VOL. 31, No.6 UNL WATER CENTER/ENVIRONMENTAL PROGRAMS DECEMBER 1999 Current Conference to Develop a Management Agenda for Nebraska's Water Future the future of Nebraska's water," Kuzelka said. University. Conference sessions will focus on management chal- lenges, management issues and prioritizing water ma n

Nebraska-Lincoln, University of

457

Funding Opportunity: Geothermal Technologies Program Seeks Technologies to Reduce Levelized Cost of Electricity for Hydrothermal Development and EGS  

Energy.gov (U.S. Department of Energy (DOE))

The Geothermal Technologies Program seeks non-prime mover technologies that have the potential to contribute to reducing the levelized cost of electricity from new hydrothermal development to 6/ kWh by 2020 and Enhanced Geothermal Systems (EGS) to 6/ kWh by 2030.

458

New Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development  

Energy.gov (U.S. Department of Energy (DOE))

The White House Council on Native American Affairs Energy Subgroup launched a new online tool that provides a centralized repository of federal funding and technical assistance programs that can support energy project development for Tribes and Alaska Native villages and corporations.

459

Systematic Analysis of Priority Water Resources Problems to Develop a Comprehensive Research Program for the Southern Plains River Basins Region  

E-Print Network (OSTI)

TR- 61 1975 Systematic Analysis of Priority Water Resources Problems to Develop a Comprehensive Research Program for the Southern Plains River Basins Region R.E. Babcock J.W. Clark E.J. Dantin M.T. Edmison N.A. Evans...

Babcock, R. E.; Clark, J. W.; Dantin, E. J.; Edmison, M. T.; Evans, N. A.; Power, W. L.; Runkles, J. L.

460

The Curriculum Development of a BIM Resilience Program for the National Institute of Building Science Facility Module  

Science Journals Connector (OSTI)

The main objective of this paper is to identify the design criteria for a BIM Education Resilient System STEM program. The curriculum's development will semantically relate to resilience concepts with Systems Engineering and Building Information Modeling ... Keywords: Building Information Modeling BIM, Course Curriculum, Decision Model, MATE, OPR, Resilience

Alan Redmond, Bob Smith, Deke Smith

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

York University Learning & Organizational Development, 2011 Page 1 of 3 Manager U at York Program  

E-Print Network (OSTI)

York University Learning & Organizational Development, 2011 Page 1 of 3 Manager U at York competencies across the University. Learning and Organizational Development, Human Resources has developed at York CERTIFICATE on completion #12; York University Learning & Organizational Development

462

U.S. DEPARTMENT OF ENERGY SOLID OXIDE FUEL CELLS PROGRAM | 2013 PROJECT PORTFOLIO  

NLE Websites -- All DOE Office Websites (Extended Search)

DEPARTMENT OF ENERGY DEPARTMENT OF ENERGY SOLID OXIDE FUEL CELLS PROGRAM | 2013 PROJECT PORTFOLIO 2 THIS PAGE INTENTIONALLY LEFT BLANK OFFICE OF FOSSIL ENERGY SOLID OXIDE FUEL CELLS PROGRAM | 2013 PROJECT PORTFOLIO 3 Disclaimer DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not neces-

463

High-temperature turbine technology program hot-gas path development test. Part II. Testing  

SciTech Connect

This topical report of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) Phase II program presents the results of testing full-scale water-cooled first-stage and second-stage turbine nozzles at design temperature and pressure to verify that the designs are adequate for operation in a full-scale turbine environment. Low-cycle fatigue life of the nozzles was demonstrated by subjecting cascade assemblies to several hundred simulated startup/shutdown turbine cycles. This testing was accomplished in the Hot-Gas Path Development Test Stand (HGPDTS), which is capable of evaluating full-scale combustion and turbine nozzle components. A three-throat cascade of the first-stage turbine nozzle was successfully tested at a nozzle inlet gas temperature of 2630/sup 0/F and a nozzle inlet pressure of 11.3 atmospheres. In addition to steady-state operation at the design firing temperature, the nozzle cascade was exposed to a simulated startup/shutdown turbine cycle by varying the firing temperature. A total of 42 h at the design point and 617 thermal cycles were accumulated during the test periods. First-stage nozzle test results show that measured metal and coolant temperatures correspond well to the predicted design values. This nozzle design has been shown to be fully satisfactory for the application (2600/sup 0/F), with growth capability to 3000/sup 0/F firing temperature. A post-test metallurgical examination of sectioned portions of the tested nozzles shows a totally bonded structure, confirming the test results and attesting to the successful performance of water-cooled composite nozzle hardware.

Horner, M.W.

1982-03-01T23:59:59.000Z

464

Public funding of airport incentives in the United States: The efficacy of the Small Community Air Service Development Grant program  

Science Journals Connector (OSTI)

Abstract As U.S. airlines began to restrict available domestic capacity at smaller airports in 2008 as a result of higher fuel prices and an economic downturn, these airports have increasingly started to rely on incentive packages composed of revenue guarantees, waived or reduced airport use fees, marketing support, or direct subsidies to attract new service. There are two main federal programs that provide funding for such incentives for small U.S. airports: the Essential Air Service (EAS) program and the Small Community Air Service Development Grant (SCASDG) program. While the EAS program has received considerable academic attention, there has been no comprehensive analysis of the success of SCASDG recipients in attracting and retaining their targeted air service. Using a metric of SCASD grant success, this paper evaluates the outcomes of 115 SCASD grantees from 2006 to 2011. In each year, fewer than half of the grant recipients were ultimately successful in meeting the goals of their proposal. Several case studies suggest that successful grantees often had significant community or airline support prior to submitting their grant and were located in slightly larger-than-average communities. Further careful consideration is necessary to determine whether reform of the SCASDG program is warranted to more effectively support the development of small community air service in the United States.

Michael D. Wittman

2014-01-01T23:59:59.000Z

465

Publications of the Fossil Energy Advanced Research and Technology Development Materials Program: April 1, 1993--March 31, 1995  

SciTech Connect

The objective of the Fossil Energy Advanced Research and Technology Development (AR and TD) Materials Program is to conduct research and development on materials for fossil energy applications, with a focus on the longer-term needs for materials with general applicability to the various fossil fuel technologies. The Program includes research aimed at a better understanding of materials behavior in fossil energy environments and on the development of new materials capable of substantial improvement in plant operations and reliability. The scope of the Program addresses materials requirements for all fossil energy systems, including materials for coal preparation, coal liquefaction, coal gasification, heat engines and heat recovery, combustion systems, and fuel cells. Work on the Program is conducted at national and government laboratories, universities, and industrial research facilities. This bibliography covers the period of April 1, 1993, through March 31, 1995, and is a supplement to previous bibliographies in this series. It is the intent of this series of bibliographies to list only those publications that can be conveniently obtained by a researcher through relatively normal channels. The publications listed in this document have been limited to topical reports, open literature publications in refereed journals, full-length papers in published proceedings of conferences, full-length papers in unrefereed journals, and books and book articles. 159 refs.

Carlson, P.T. [comp.

1995-04-01T23:59:59.000Z

466

UBC Social Ecological Economic Development Studies (SEEDS) Student Report Allard Hall LCA Study  

E-Print Network (OSTI)

LCA Study CIVL 498C November 18, 2013 1065 1529 University of British Columbia Disclaimer: "UBC SEEDS ­ the UBC LCA Project ­ which aims to support the development of the field of life cycle assessment (LCA at rob.sianchuk@gmail.com #12;Allard Hall LCA Study Emma Brown CIVL 498C November 18, 2013 #12

467

Development of Physical Protection Regulations for Rosatom State Corporation Sites under the U.S.-Russian MPC&A Program  

SciTech Connect

This paper describes issues related to upgrading the physical protection regulatory basis for Rosatom State Corporation sites. It is underlined that most of the regulatory and methodological documents for this subject area have been developed under the U.S.-Russian MPC&A Program. According to the joint management plan developed and agreed upon by the parties in 2005, nearly 50 physical protection documents were identified to be developed, approved and implemented at Rosatom sites by 2012. It is also noted that, on the whole, the plans have been fulfilled.

Izmaylov, Alexander; Babkin, Vladimir; Shemigon, Nikolai N.; O'Brien, Patricia; Wright, Troy L.; Hazel, Michael J.; Tuttle, John D.; Cunningham, Mitchel E.; Lane, Melinda; Kovchegin, Dmitry

2012-07-14T23:59:59.000Z

468

E-Print Network 3.0 - advanced development program Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

is supported by a grant from the National... In a Nutshell From the National Science Foundation website: "The goal of the ADVANCE program is to increase... for institution-wide...

469

Intercultural Competence Development through the Global Awareness Program at the University of Kansas  

E-Print Network (OSTI)

abroad and earned the Global Awareness Program (GAP) certificate at the University of Kansas (KU). Byram's 1997 definition of intercultural competence provided the conceptual framework for this study. Informed by this definition, my working definition...

McEnaney, Lauren E

2013-05-31T23:59:59.000Z

470

User:GregZiebold/Developing Country Programs Map | Open Energy Information  

Open Energy Info (EERE)

Programs Map Programs Map < User:GregZiebold Jump to: navigation, search Zoom South America Central America North America Africa Central Africa Northern Africa Southern Africa Eastern Asia Southern Asia Asia/Pacific Central Asia Middle East Northern Asia Northern Europe Western Europe Southern Europe Programs & Projects Afghanistan 5 Albania 3 Algeria 6 Angola 1 Anguilla 1 Antigua and Barbuda 6 Argentina 12 Armenia 6 Aruba 3 Azerbaijan 2 Bahamas 6 Bahrain 2 Bangladesh 27 Barbados 9 Belize 8 Benin 3 Bhutan 7 Bolivia 4 Botswana 5 Brazil 37 Brunei 7 Bulgaria 2 Burkina Faso 7 Burundi 6 Cambodia 25 Cameroon 8 Cape Verde 4 Cayman Islands 1 Central African Republic 4 Chad 4 Chile 24 China 63 Colombia 26 Costa Rica 24 Croatia 1 Cuba 5 Democratic Republic of Congo 13

471

Design and Implementation of an International Training Program on Repository Development and Management  

SciTech Connect

Korea Hydro and Nuclear Power Co., Ltd. (KHNP) is an electric company in the Republic of Korea with twenty operational nuclear power plants and eight additional units that are either planned or currently under construction. Regulations require that KHNP manage the radioactive waste generated by their nuclear power plants. In the course of planning low, intermediate, and high level waste storage facilities, KHNP sought interaction with an acknowledged expert in the field of radioactive waste management and, consequently, contacted Sandia National Laboratories (SNL). KHNP has contracted with SNL to provide a year long training program on repository science. This paper discusses the design of the curriculum, specific plans for execution of the training program, and recommendations for smooth implementation of international training programs. (authors)

Vugrin, K.W. [Sandia National Laboratories Carlsbad Programs Group, Performance Assessment and Decision Analysis Department, Carlsbad, NM (United States); Twitchell, Ch.A. [Sandia National Laboratories, Carlsbad Programs Group, Center Business Operations Department, Carlsbad, NM (United States)

2008-07-01T23:59:59.000Z

472

Phase I of the Near Term Hybrid Passenger Vehicle Development Program. Final report  

SciTech Connect

The results of Phase I of the Near-Term Hybrid Vehicle Program are summarized. This phase of the program ws a study leading to the preliminary design of a 5-passenger hybrid vehicle utilizing two energy sources (electricity and gasoline/diesel fuel) to minimize petroleum usage on a fleet basis. This report presents the following: overall summary of the Phase I activity; summary of the individual tasks; summary of the hybrid vehicle design; summary of the alternative design options; summary of the computer simulations; summary of the economic analysis; summary of the maintenance and reliability considerations; summary of the design for crash safety; and bibliography.

Not Available

1980-10-01T23:59:59.000Z

473

Fossil Energy Advanced Research and Technology Development Materials Program. Semiannual progress report for the period ending September 30, 1992  

SciTech Connect

Objective of this materials program is to conduct R and D on materials for fossil energy applications with focus on longer-term and generic needs of the various fossil fuel technologies. The projects are organized according to materials research areas: (1) ceramics, (2) new alloys: iron aluminides, advanced austenitics and chromium niobium alloys, and (3) technology development and transfer. Separate abstracts have been prepared.

Cole, N.C.; Judkins, R.R. [comps.

1992-12-01T23:59:59.000Z

474

Notice of Intent to Develop an Information Sharing and Safeguarding Program Notice  

Directives, Delegations, and Requirements

This memorandum provides justification for establishing a Directive that sets forth requirements and responsibilities for the Department of Energy's (DOE) Information Sharing and Safeguarding (ISS) Program for the responsible sharing and safeguarding of Agency information to enhance national security, protect the safety of the American people, and encourage sustained collaboration between Federal, state, local, tribal, territorial, private sector, and foreign partners,

2014-08-07T23:59:59.000Z

475

Department of Mechanical Engineering Fall 2011 PSU Engineering Leadership and Development Program Baobab Fruit  

E-Print Network (OSTI)

Program ­ Baobab Fruit Pulp Processor Overview A baobab is a fruit that grows on trees native to sub-Saharan region in Africa. Many small villages are beginning to process the baobab fruit by separating the seeds of students designed a baobab fruit pulp processor for a small community in Africa. For our project we were

Demirel, Melik C.

476

GE Hosts Visit by DOE to Kick Off High-Efficiency GeneratorDevelopment Program  

E-Print Network (OSTI)

, Program Manager for Distributed Energy and Electric Reliability, and James Daley, Team Leader for High's energy plan. The HTS project is expected to produce major improvements in the efficiency and reactive, oil and gas, distributed power and energy rental industries. ### For more information, contact: Dennis

477

THE TRUE COST OF PAIR PROGRAMMING: DEVELOPMENT OF A COMPREHENSIVE MODEL AND TEST  

E-Print Network (OSTI)

teams at Symantec produced cleaner test classes and better coverage tests through the pair- programming process (Morales, 2002). Jensen, a consultant for the Software Technology Support Center, Hill Air Force Base, reported an error rate of 0.001 in a...

Sun, Wenying

2011-09-19T23:59:59.000Z

478

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 3.6 Technology Validation  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Validation Technology Validation Multi-Year Research, Development and Demonstration Plan Page 3.6 - 1 3.6 Technology Validation The Technology Validation sub-program tests, demonstrates, and validates hydrogen (production, delivery, storage) and fuel cell systems and their integrated components in real-world environments. Feedback provided to the DOE hydrogen and fuel cell research and development (RD&D) projects, industry partners, and end users helps determine the additional RD&D required to move the technologies forward or to determine whether the technologies are ready for commercialization. Evaluations conducted include the following: * Applications - transportation; primary power; combined heat and power (CHP); combined

479

NETL: SECA Core Technology Program Review  

NLE Websites -- All DOE Office Websites (Extended Search)

SECA Core Technology Program Review SECA Core Technology Program Review February 19-20, 2003 Table of Contents Disclaimer Papers and Presentations Materials & Manufacturing Simulation and Modeling Fuel Processing Power Electronics, Sensors, Controls & Diagnostics Final Agenda [PDF-78KB] Peer Review Rating Results Summary [PDF-192KB] Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

480

National Energy Efficiency and Conservation Policies and Programs in Developed Countries and Middle East  

E-Print Network (OSTI)

are highly dependent on energy, should be the preferred solution to develop and achieve a sustainable and secure economy. This paper describes policies for energy conservation adopted by developed industrialized countries such as Japan, Germany, France...

Tyrer, C. F.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "development program disclaimer" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

[Gas cooled fuel cell systems technology development program]. Quarterly technical progress narrative No. 21, December 1, 1987--February 29, 1988  

SciTech Connect

Objective is the development of a gas-cooled phosphoric acid fuel cell for electric utility power plant application. Primary objectives are to: demonstrate performance endurance in 10-cell stacks at 70 psia, 190 C, and 267 mA/cm{sup 2}; improve cell degradation rate to less than 8 mV/1000 hours; develop cost effective criteria, processes, and design configurations for stack components; design multiple stack unit and a single 100 kW fuel cell stack; design a 375 kW fuel cell module and demonstrate average cell beginning-of-use performance; manufacture four 375-kW fuel cell modules and establish characteristics of 1.5 MW pilot power plant. The work is broken into program management, systems engineering, fuel cell development and test, facilities development.

Not Available

1988-03-01T23:59:59.000Z

482

Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly report, December 1, 1994--February 28, 1995  

SciTech Connect

Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emission. Improved costing and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced GE heavy duty machines utilizing advanced cooling and enhancement in component efficiency. Both of these activities require the identification and resolution of technical issues critical to achieving Advanced Turbine System (ATS) goals. The emphasis for the industrial ATS will be placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS will be placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS will be placed on developing a technology base for advanced turbine cooling while utilizing demonstrated and planned improvements in low emissions combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE`s Industrial and Power Systems is solely responsible for offering Ge products for the industrial and utility markets. The GE ATS program will be managed fully by this organization with core engine technology being supplied by GE Aircraft Engines (GEAE) and fundamental studies supporting both product developments being conducted by GE Corporate Research and Development (CRD).

NONE

1995-12-31T23:59:59.000Z

483

Self-Assessment Program Assessment plan - Developed By NNSA/Nevada Site Office Facility Representative Division  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SELF-ASSESSMENT SELF-ASSESSMENT Assessment Plan NNSA/Nevada Site Office Independent Oversight Division Performance Objective: Management should ensure that effective management and independent self- assessments are being conducted periodically by technically qualified personnel. [10 CFR 830.122, subpart A & DOE O 414.1A, Quality Assurance] Criteria: Managers shall assess their management processes and be actively involved in the assessment process to ensure results contribute to improved performance of programs, systems, and work processes. DOE O 414.1A, Criterion 9 (a) An effective assessment and safety management program shall focus on achieving DOE/NNSA expectations through federal regulations and standards. DOE O 414.1A, Criterion 9 (a) An effective assessment supports management's goal to protect people and

484

Educational Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Programs Programs Argonne National Laboratory Educational Programs Search Argonne ... Search Argonne Home > Educational Programs > Welcome Type of Appointments Postdoctoral Newsletters Postdoctoral Office Activities Postdoctoral Programs Alumni Postdoctoral Society of Argonne Newcomers Assistance Office Postdoctoral Resources Postdoctoral Mentoring Program Contact Us Schedule of Career Development Seminars Organized by the Postdoctoral Office for 2011 Here is a schedule of all of our Career Development Seminars and Workshops! Normally, the events happen at lunchtime and food is provided. The topics of these events include: Journal Clubs Career Development Networking We welcome all of our Postdocs and colleagues to and join us! Wednesday January 19 Postdoc Journal Club and pizza lunch. Magnetic Domain-Wall Racetrack Memory