Powered by Deep Web Technologies
Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Post-2015 Development Agenda For Integrating Sustainable Development Goals (SDGs)  

E-Print Network [OSTI]

) and Post Millennium Development Goals (MDGs) The Environment Research and Technology Development Fund S-11 / Beyond MDGs Japan Symposium The Environment Research and Technology Development Fund S-11 / Beyond MDGs and the environment, as well as consideration of integrated goals for achieving sustainable development, in order

Furui, Sadaoki

2

Sustainably Priced Energy Enterprise Development (SPEED) Goals  

Broader source: Energy.gov [DOE]

Vermont's Sustainably Priced Energy Enterprise Development (SPEED) Program was created by legislation in 2005 to promote renewable energy development. The SPEED program itself is not a renewable...

3

State Energy Policy Goal and Development (Montana)  

Broader source: Energy.gov [DOE]

This statute establishes the state of Montana's support for the development and implementation of renewable energy technologies as well as environmentally-friendly modifications to existing...

4

Developing and Executing Goal-Based, Adjustably Autonomous Procedures  

E-Print Network [OSTI]

Developing and Executing Goal-Based, Adjustably Autonomous Procedures David Kortenkamp, R. Peter@jsc.nasa.gov This paper describes an approach to representing, authoring and executing procedures during human spaceflight missions. The approach allows for the explicit incorporation of goals into procedures. The approach also

Kortenkamp, David

5

PROJECT GOALS Develop a framework for the documentation of  

E-Print Network [OSTI]

PROJECT GOALS Develop a framework for the documentation of proposed `People' and `Integration A set of seven spreadsheet documents, each with multiple sheets, collating data on proposed indicators is ongoing and involves the collation of data from newsletters, staff documents, media reports, previous

6

India's Challenge to Meet the Millennium Development Goals  

E-Print Network [OSTI]

and Sustainable Development The Earth Institute at Columbia University www.earth.columbia.edu #12;2 India is Director, South Asia Program at the Center on Globalization and Sustainable Development (CGSD) and a member the importance of human development in the context of sustainable economic and social development. They join

7

The Decade of Development: Goal Setting and Policy Challenges in India  

E-Print Network [OSTI]

The Decade of Development: Goal Setting and Policy Challenges in India Jeffrey D. Sachs and Nirupam Papers #12;The Decade of Development: Goal Setting and Policy Challenges in India Jeffrey D. Sachs during several trips to India in the year 2000. #12;1 The Decade of Development: Goal Setting and Policy

8

Carbon Mitigation The goal of this project is to identify and develop standards and  

E-Print Network [OSTI]

viable carbon capture and sequestration (CCS) technologies depend upon the added cost of generatingCarbon Mitigation CERAMICS The goal of this project is to identify and develop standards and measurement methods currently needed by the energy industry to enable the development of cost efficient carbon

Magee, Joseph W.

9

Goal Practice & Experience: Status Quo and Future for Industrial Scale Biomass Energy Development in China  

Broader source: Energy.gov [DOE]

Breakout Session 3D—Fostering Technology Adoption III: International Market Opportunities in Bioenergy Goal Practice & Experience : Status Quo and Future for Industrial Scale Biomass Energy Development in China Huiyong Zhuang, Research Professor, National Energy Research Center of Liquid Biofuel, National Bio Energy Co., Ltd.

10

Hydrogen Storage The goal of this project is to develop the metrologies necessary  

E-Print Network [OSTI]

materials for hydrogen storage. Approach Materials Science and Engineering Laboratory The evaluationHydrogen Storage METALS The goal of this project is to develop the metrologies necessary for rapid, high-throughput measurement of the hydrogen content of novel materials proposed for hydrogen storage

11

PROJECT GOALS This project involved the development of the first Carbon  

E-Print Network [OSTI]

emissions, which will in turn allow prioritisation of actions to reduce the ANU carbon footprint. TYPEPROJECT GOALS This project involved the development of the first Carbon Emissions Inventory report and master Excel spreadsheet Figure 1: ANU Carbon Emission by Category (t CO2e) DESCRIPTION

12

Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density,TiO2(110). |Gas-phaseDeveloping a

13

Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density,TiO2(110). |Gas-phaseDeveloping amagnetic

14

Development of a Societal-Risk Goal for Nuclear Power Safety  

SciTech Connect (OSTI)

The safety-goal policy of the Nuclear Regulatory Commission (NRC) has never included a true societal-risk goal. The NRC did acknowledge that the original goal for the risk of latent cancer facilities “was an individual risk goal not related to the number of people involved,” and stated that “a true societal risk goal would place a limit on the aggregate number of people affected.” However, this limitation was never satisfactorily addressed. Moreover, the safety goal has historically focused primarily on fatalities and latent health effects, while experience with actual nuclear accidents has shown that societal disruption can be significant even in accidents that yield only small to modest numbers of fatalities. Therefore, we have evaluated the social disruption effects from severe reactor accidents as a basis to develop a societal-risk goal for nuclear power plants, considering both health effects and non-health concerns such as property damage and land interdiction. Our initial analysis considered six different nuclear power plant sites in the U.S. for Boiling Water Reactors and Pressurized Water Reactors. The accident sequences considered for these two reactor types were station blackout sequences (both short-term and long-term SBO) as well as an STSBO with RCIC failure for the BWR and a Steam Generator Tube Rupture for the PWR. The source term release was an input in a RASCAL calculation of the off-site consequences using actual site-based weather data for each of the six plant sites randomly selected over a two-year period. The source term release plumes were then compared to Geographical Information System data for each site to determine the population affected and that would need to be evacuated to meet current emergency preparedness regulations. Our results to date suggest that number of people evacuated to meet current protective action guidelines appears to be a good proxy for disruption -- and, unlike other measures of disruption, has the advantage of being relatively straightforward to calculate for a given accident scenario and a given geographical location and plant site. Revised safety goals taking into account the potential for societal disruption could in principle be applied to the current generation of nuclear plants, but could also be used in evaluating and siting new technologies, such as small modular light water reactors, advanced Gen-IV high-temperature reactors, as well as reactor designs with passive safety features such as filtered vented containments.

Vicki Bier; Michael Corradini; Robert Youngblood; Caleb Roh; Shuji Liu

2014-06-01T23:59:59.000Z

15

Development Development  

E-Print Network [OSTI]

Programme 2007 - 2010 The aim of the Timber Development Programme (TDP) is "to contribute to the sustainable development to underpin sustainable forest management and support economic growth and employment acrossDevelopment Timber Development Programme 2007 - 2010 #12;2 | Timber Development Programme 2007

16

Development of an Updated Societal-Risk Goal for Nuclear Power Safety  

SciTech Connect (OSTI)

This report briefly summarizes work done in FY 2013 on the subject LDRD. The working hypothesis is that societal disruption should be addressed in a safety goal. This is motivated by the point that the Fukushima disaster resulted in very little public dose, but enormous societal disruption; a goal that addressed societal disruption would fill a perceived gap in the US NRC safety goal structure. This year's work entailed analyzing the consequences of postulated accidents at various reactor sites in the US, specifically with a view to quantifying the number of people relocated and the duration of their relocation, to see whether this makes sense as a measure of societal disruption.

Vicki Bier; Michael Corradini; Robert Youngblood; Caleb Roh; Shuji Liu

2014-07-01T23:59:59.000Z

17

Environmental Goals for MIT MIT will become a leader in environmentally responsible operations, development of  

E-Print Network [OSTI]

: · Conserve energy, seeking continuous reductions in our per capita energy consumption · Reduce campus air a minimum standard and support progress toward these general environmental goals, MIT has determined the recycling and conservation of materials · Increase the use of recycled-content products · Reduce the volume

Leiserson, Charles E.

18

Promoting India's development: energy security and climate security are convergent goals  

SciTech Connect (OSTI)

This paper investigates three aspects of the energy-climate challenges faced by India. First, we examine energy security in light of anticipated growth in power generation in response to the national goal of maintaining close to 10% growth in GDP. Second, we examine possible options for mitigation and adaptation to climate change for India that it can take to the coming Copenhagen meeting on climate change. Lastly, we introduce an open web based tool for analyzing and planning global energy systems called the Global Energy Observatory (GEO).

Rajan, Gupta [Los Alamos National Laboratory; Shankar, Harihar [Los Alamos National Laboratory; Joshi, Sunjoy [INDIA

2009-01-01T23:59:59.000Z

19

Technology development goals for automotive fuel cell power systems. Final report  

SciTech Connect (OSTI)

This report determines cost and performance requirements for Proton Exchange Membrane (PEM) fuel cell vehicles carrying pure H{sub 2} fuel, to achieve parity with internal combustion engine (ICE) vehicles. A conceptual design of a near term FCEV (fuel cell electric vehicle) is presented. Complete power system weight and cost breakdowns are presented for baseline design. Near term FCEV power system weight is 6% higher than ICE system, mid-term FCEV projected weights are 29% lower than ICE`s. There are no inherently high-cost components in FCE, and at automotive production volumes, near term FCEV cost viability is closer at hand than at first thought. PEM current vs voltage performance is presented for leading PEM manufacturers and researchers. 5 current and proposed onboard hydrogen storage techniques are critically compared: pressurized gas, cryogenic liquid, combined pressurized/cryogenic, rechargeable hydride, adsorption. Battery, capacitor, and motor/controller performance is summarized. Fuel cell power system component weight and cost densities (threshold and goal) are tabulated.

James, B.D.; Baum, G.N.; Kuhn, I.F. Jr. [Directed Technologies, Inc., Arlington, VA (United States)

1994-08-01T23:59:59.000Z

20

Development of Metric for Measuring the Impact of RD&D Funding on GTO's Geothermal Exploration Goals (Presentation)  

SciTech Connect (OSTI)

The Department of Energy's Geothermal Technologies Office (GTO) provides RD&D funding for geothermal exploration technologies with the goal of lowering the risks and costs of geothermal development and exploration. In 2012, NREL was tasked with developing a metric to measure the impacts of this RD&D funding on the cost and time required for exploration activities. The development of this metric included collecting cost and time data for exploration techniques, creating a baseline suite of exploration techniques to which future exploration and cost and time improvements could be compared, and developing an online tool for graphically showing potential project impacts (all available at http://en.openei.org/wiki/Gateway:Geothermal). The conference paper describes the methodology used to define the baseline exploration suite of techniques (baseline), as well as the approach that was used to create the cost and time data set that populates the baseline. The resulting product, an online tool for measuring impact, and the aggregated cost and time data are available on the Open EI website for public access (http://en.openei.org).

Jenne, S.; Young, K. R.; Thorsteinsson, H.

2013-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Sustainable Community Development Goal: Colorado State University will enhance its focus and depth in graduate education, applied research, and outreach in  

E-Print Network [OSTI]

Sustainable Community Development Goal: Colorado State University will enhance its focus and depth in graduate education, applied research, and outreach in analyses related to sustainable community development as a leading source of information and analysis promoting community development. This will include community

22

ACHIEVE is a system designed to support employee and organizational achievement, development and success. The system has three interrelated components: performance planning (setting goals),  

E-Print Network [OSTI]

1 ACHIEVE ACHIEVE is a system designed to support employee and organizational achievement), professional development, and reflection or learning from experience. Ongoing support and feedback throughout to achieve organizational success, individual goals must align with broader unit and organizational goals. 2

Brownstone, Rob

23

Our goal is to develop physically based lighting models and percep-tually based rendering procedures for computer graphics that will  

E-Print Network [OSTI]

be a major paradigm shift for the computer graphics industry, but would have much broader applicability thanAbstract Our goal is to develop physically based lighting models and percep- tually based rendering framework is subdivided into three sub-sections: the local light reflection model, the energy transport

Ferwerda, James A.

24

Developing a Marketing Plan  

E-Print Network [OSTI]

Developing a good marketing plan will help you identify and quantify costs, set price goals, determine potential price outlook, examine production and price risk, and develop a strategy for marketing your crop. This publication describes...

Bevers, Stan; Waller, Mark L.; Amosson, Stephen H.; McCorkle, Dean

2009-03-02T23:59:59.000Z

25

Sustainable Development  

E-Print Network [OSTI]

160 Sustainable Development Sustainable Development Degree options BSc or MA (Single Honours Degree) Sustainable Development Contributing Schools Biology; Chemistry; Computer Science; Geography & Geosciences in arts subjects as partner subjects within Sustainable Development, then you should apply for the MA

Brierley, Andrew

26

Sustainable Development  

E-Print Network [OSTI]

150 Sustainable Development Sustainable Development MA or BSc (Single Honours Degree) Sustainable Sustainable Development, then you should apply for the MA degree, and students most interested in Science subjects as partner subjects within Sustainable Development should apply for the BSc degree. Subject

Brierley, Andrew

27

SUSTAINABLE DEVELOPMENT  

E-Print Network [OSTI]

Report on SUSTAINABLE DEVELOPMENT 2 0 1 1 ­ 2 0 1 2 ISCN-GULF Charter Report #12;3 1. FACILITIES with projects of our University's Cell for Sustainable Development; it also presents evidence for steady alike. THIS REPORT This is the second report on sustainable development at the University of Luxembourg

van der Torre, Leon

28

Developing health-based pre-planning clearance goals for airport remediation following chemical terrorist attack: Introduction and key assessment considerations  

SciTech Connect (OSTI)

In the event of a chemical terrorist attack on a transportation hub, post-event remediation and restoration activities necessary to attain unrestricted facility re-use and re-entry could require hours to multiple days. While restoration timeframes are dependent on numerous variables, a primary controlling factor is the level of pre-planning and decision-making completed prior to chemical terrorist release. What follows is the first of a two-part analysis identifying key considerations, critical information, and decision criteria to facilitate post-attack and post-decontamination consequence management activities. A conceptual site model and human health-based exposure guidelines are developed and reported as an aid to site-specific pre-planning in the current absence of U.S. state or Federal values designated as compound-specific remediation or re-entry concentrations, and to safely expedite facility recovery to full operational status. Chemicals of concern include chemical warfare nerve and vesicant agents and the toxic industrial compounds phosgene, hydrogen cyanide, and cyanogen chloride. This work has been performed as a national case study conducted in partnership with the Los Angeles International Airport and The Bradley International Terminal. All recommended guidelines have been selected for consistency with airport scenario release parameters of a one-time, short-duration, finite airborne release from a single source followed by compound-specific decontamination.

Watson, Annetta Paule [ORNL; Raber, Ellen [Lawrence Livermore National Laboratory (LLNL); Dolislager, Frederick [University of Tennessee, Knoxville (UTK); Hauschild, Veronique [U.S. Army Center for Health Promotion and Preventive Medicine; Hall, Dr. Linda [ENVIRON International Corporation; Love, Dr. Adam [Johnson Wright, Inc.

2011-01-01T23:59:59.000Z

29

Program Development  

SciTech Connect (OSTI)

This presentation covers how to go about developing a human reliability program. In particular, it touches on conceptual thinking, raising awareness in an organization, the actions that go into developing a plan. It emphasizes evaluating all positions, eliminating positions from the pool due to mitigating factors, and keeping the process transparent. It lists components of the process and objectives in process development. It also touches on the role of leadership and the necessity for audit.

Atencio, Julian J.

2014-05-01T23:59:59.000Z

30

Goals, Objectives, and Requirements (GOR) of the Ground-based Nuclear Detonation Detection (GNDD) Team for the Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D)  

SciTech Connect (OSTI)

The goal, objectives, and requirements (GOR) presented in this document define a framework for describing research directed specifically by the Ground-based Nuclear Detonation Detection (GNDD) Team of the National Nuclear Security Administration (NNSA). The intent of this document is to provide a communication tool for the GNDD Team with NNSA management and with its stakeholder community. It describes the GNDD expectation that much of the improvement in the proficiency of nuclear explosion monitoring will come from better understanding of the science behind the generation, propagation, recording, and interpretation of seismic, infrasound, hydroacoustic, and radionuclide signals and development of "game-changer" advances in science and technology.

Casey, Leslie A.

2014-01-13T23:59:59.000Z

31

Clean development mechanism: Perspectives from developing countries  

SciTech Connect (OSTI)

This paper addresses the political acceptability and workability of CDM by and in developing countries. At COP-3 in Kyoto in 1997, the general position among developing countries changed from strong rejection of joint implementation to acceptance of CDM. The outgrowth of CDM from a proposal from Brazil to establish a Clean Development Fund gave developing countries a sense of ownership of the idea. More importantly, establishing support for sustainable development as a main goal for CDM overcame the resistance of many developing countries to accept a carbon trading mechanism. The official acceptance of CDM is not a guarantee of continued acceptance, however. Many developing countries expect CDM to facilitate a substantial transfer of technology and other resources to support economic growth. There is concern that Annex I countries may shift official development assistance into CDM in order to gain carbon credits, and that development priorities could suffer as a result. Some fear that private investments could be skewed toward projects that yield carbon credits. Developing country governments are wary regarding the strong role of the private sector envisioned for CDM. Increasing the awareness and capacity of the private sector in developing countries to initiate and implement CDM projects needs to be a high priority. While private sector partnerships will be the main vehicle for resource transfer in CDM, developing country governments want to play a strong role in overseeing and guiding the process so that it best serves their development goals. Most countries feel that establishment of criteria for sustainable development should be left to individual countries. A key issue is how CDM can best support the strengthening of local capacity to sustain and replicate projects that serve both climate change mitigation and sustainable development objectives.There is support among developing countries for commencing CDM as soon as possible. Since official commencement must await the entry into force of the Kyoto Protocol, many developing countries support the establishment of an Interim Phase starting in 2000, with possible retroactive crediting once the Protocol enters into force.

Sari, Agus P.; Meyers, Stephen

1999-06-01T23:59:59.000Z

32

The Millenium Development Goals and Tobacco Control  

E-Print Network [OSTI]

projected population from the United Nations World Population Prospects (2000 Revision), and an average annual growth rate of real GDP

World Health Organization

2004-01-01T23:59:59.000Z

33

Software Developers  

Broader source: Energy.gov [DOE]

Because SEED will provide a common, open-source data framework, software developers will be able to write applications that access the data in a consistent way (with proper permissions), or build functionalities onto the SEED platform in a replicable way.

34

Rural Development Energy Audit & Renewable Energy Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Rural Development Energy Audit & Renewable Energy Development Assistance Webinar Rural Development Energy Audit & Renewable Energy Development Assistance Webinar January 21, 2015...

35

Nozzle development  

SciTech Connect (OSTI)

The objective of this program has been the development of experimental techniques and data processing procedures to allow for the characterization of multi-phase fuel nozzles using laboratory tests. Test results were to be used to produce a single value coefficient-of-performance that would predict the performance of the fuel nozzles independent of system application. Several different types of fuel nozzles capable of handling multi-phase fuels have been characterized for: (a) fuel flow rate versus delivery pressure, (b) fuel-air ratio throughout the fuel spray or plume and the effective cone angle of the injector, and (c) fuel drop- or particle-size distribution as a function of fluid properties. Fuel nozzles which have been characterized on both single-phase liquids and multi-phase liquid-solid slurries include a variable-film-thickness nozzle, a commercial coal-water slurry (CWS) nozzle, and four diesel injectors of different geometries (tested on single-phase fluids only). Multi-phase mixtures includes CWS with various coal loadings, surfactant concentrations, and stabilizer concentrations, as well as glass-bead water slurries with stabilizing additives. Single-phase fluids included glycerol-water mixtures to vary the viscosity over a range of 1 to 1500 cP, and alcohol-water mixtures to vary the surface tension from about 22 to 73 dyne/cm. In addition, tests were performed to characterize straight-tube gas-solid nozzles using two differences size distributions of glass beads in air. Standardized procedures have been developed for processing measurements of spray drop-size characteristics and the overall cross-section average drop or particle size. 43 refs., 60 figs., 7 tabs.

Dodge, F.T.; Dodge, L.G.; Johnson, J.E.

1989-06-01T23:59:59.000Z

36

VAP Development: Initiation, Development, Evaluation, and Release  

SciTech Connect (OSTI)

This white paper provides a plan to formalize the evaluation of newly developed VAPs and a framework for the development of value-added products through four different stages: Initiation, Development, Evaluation, and Release.

Jensen, M; Collis, Fast, J; Flynn, C; Mather, J; McFarlane, S; Monroe, J; Sivaraman, C; Xie, S

2011-02-23T23:59:59.000Z

37

Energy Efficiency Project Development  

SciTech Connect (OSTI)

The International Utility Efficiency Partnerships, Inc. (IUEP) has been a leader among the industry groups that have supported voluntary initiatives to promote international energy efficiency projects and address global climate change. The IUEP maintains its leadership by both supporting international greenhouse gas (GHG) reduction projects under the auspices of the U.S. Department of Energy (DOE) and by partnering with U.S. and international organizations to develop and implement strategies and specific energy efficiency projects. The goals of the IUEP program are to (1) provide a way for U.S. industry to maintain a leadership role in international energy efficiency infrastructure projects; (2) identify international energy project development opportunities to continue its leadership in supporting voluntary market-based mechanisms to reduce GHG emissions; and (3) demonstrate private sector commitment to voluntary approaches to global climate issues. The IUEP is dedicated to identifying, promoting, managing, and assisting in the registration of international energy efficiency projects that result in demonstrated voluntary reductions of GHG emissions. This Final Technical Report summarizes the IUEP's work in identifying, promoting, managing, and assisting in development of these projects and IUEP's effort in creating international cooperative partnerships to support project development activities that develop and deploy technologies that (1) increase efficiency in the production, delivery and use of energy; (2) increase the use of cleaner, low-carbon fuels in processing products; and (3) capture/sequester carbon gases from energy systems. Through international cooperative efforts, the IUEP intends to strengthen partnerships for energy technology innovation and demonstration projects capable of providing cleaner energy in a cost-effective manner. As detailed in this report, the IUEP met program objectives and goals during the reporting period January 1, 2001 through December 31, 2002. At the request of the DOE, we have also included in this report additional activities during the reporting period January, 1999 through January, 2001. This additional information had been reported earlier in the Final Technical Reports that summarized activities undertaken in those earlier periods.

IUEP

2004-03-01T23:59:59.000Z

38

Advanced Technology Development and Mitigation | National Nuclear...  

National Nuclear Security Administration (NNSA)

Technology Development and Mitigation This sub-program includes laboratory code and computer engineering and science projects that pursue long-term simulation and computing goals...

39

Funding Opportunity: Technology Advancement for Rapid Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

an opportunity for potential applicants to begin developing partnerships and begin the process of gathering data to prepare their application. GTP's goal is to address the high...

40

MFRC Training Development & Delivery Program - Bloodstain & Toxicology...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Resource Center (MFRC) Training Development and Delivery Program increases access to forensic science training for publicly funded state and local forensic scientists. Its goals...

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Mack LNG vehicle development  

SciTech Connect (OSTI)

The goal of this project was to install a production-ready, state-of-the-art engine control system on the Mack E7G natural gas engine to improve efficiency and lower exhaust emissions. In addition, the power rating was increased from 300 brake horsepower (bhp) to 325 bhp. The emissions targets were oxides of nitrogen plus nonmethane hydrocarbons of less than 2.5 g/bhp-hr and particulate matter of less than 0.05 g/bhp-hr on 99% methane. Vehicle durability and field testing were also conducted. Further development of this engine should include efficiency improvements and oxides of nitrogen reductions.

Southwest Research Institute

2000-01-05T23:59:59.000Z

42

ADVANCED SORBENT DEVELOPMENT PROGRAM  

SciTech Connect (OSTI)

The overall objective of this program was to develop regenerable sorbents for use in the temperature range of 343 to 538 C (650 to 1000 F) to remove hydrogen sulfide (H{sub 2}S) from coal-derived fuel gases in a fluidized-bed reactor. The goal was to develop sorbents that are capable of reducing the H{sub 2}S level in the fuel gas to less than 20 ppmv in the specified temperature range and pressures in the range of 1 to 20 atmospheres, with chemical characteristics that permit cyclic regeneration over many cycles without a drastic loss of activity, as well as physical characteristics that are compatible with the fluidized bed application.

Unknown

1998-06-16T23:59:59.000Z

43

Psychology of Sustainable Development  

E-Print Network [OSTI]

to achieve sustainable development: economic, environmental,out historical aspects of sustainable development and itsPsychology of Sustainable Development By Peter Schmuck and

Milfont, Taciano Lemos

2003-01-01T23:59:59.000Z

44

Ecosystems and Sustainable Development  

E-Print Network [OSTI]

Review: Ecosystems and Sustainable Development Editors: J.L.Ecosystems and Sustainable Development. Southhampton, UK:as well. Ecosystems and Sustainable Development is a strong

Tufford, Dan

1999-01-01T23:59:59.000Z

45

Ecosystems and Sustainable Development  

E-Print Network [OSTI]

Ecosystems and Sustainable Development Editors: J.L. Uso,Ecosystems and Sustainable Development. Southhampton, UK:ISBN: 1-85312-502-4. Sustainable development research is a

Tufford, Dan

1999-01-01T23:59:59.000Z

46

Psychology of Sustainable Development  

E-Print Network [OSTI]

to achieve sustainable development: economic, environmental,Psychology of Sustainable Development By Peter Schmuck andPsychology of Sustainable Development. Norwell, MA: Kluwer

Milfont, Taciano Lemos

2003-01-01T23:59:59.000Z

47

Individual Development and Excutive Development Plan Resources  

Broader source: Energy.gov [DOE]

According to OPM, an individual development plan (IDP) is a tool to assist employees in career and personal development. Its primary purpose is to help employees reach short and long-term career...

48

ISE System Development Methodology Manual  

SciTech Connect (OSTI)

The Information Systems Engineering (ISE) System Development Methodology Manual (SDM) is a framework of life cycle management guidelines that provide ISE personnel with direction, organization, consistency, and improved communication when developing and maintaining systems. These guide-lines were designed to allow ISE to build and deliver Total Quality products, and to meet the goals and requirements of the US Department of Energy (DOE), Westinghouse Savannah River Company, and Westinghouse Electric Corporation.

Hayhoe, G.F.

1992-02-17T23:59:59.000Z

49

STAR Vertex Detector Upgrade Development  

SciTech Connect (OSTI)

We report on the development and prototyping efforts undertaken with the goal of producing a micro-vertex detector for the STAR experiment at the RHIC accelerator at BNL. We present the basic detector requirements and show a sensor development path, conceptual mechanical design candidates and readout architecture. Prototyping and beam test results with current generation MimoSTAR-2 sensors and a readout system featuring FPGA based on-the-fly hit finding and data sparsification are also presented.

Greiner, Leo C.; Matis, Howard S.; Stezelberger, Thorsten; Vu,Chinh Q.; Wieman, Howard; Szelezniak, Michal; Sun, Xiangming

2008-01-28T23:59:59.000Z

50

Microsoft Word - Research and Development Roadmap for Next-Generation...  

Broader source: Energy.gov (indexed) [DOE]

inform decision- making and the development of program goals and targets. The National Renewable Energy Laboratory (NREL) originally developed the tool and describes it in more...

51

Development of More Effective Biosurfactants for Enhanced Oil Recovery  

SciTech Connect (OSTI)

The overall goal of this research was to develop effective biosurfactant production for enhanced oil recovery in the United States.

McInerney, M.J.; Mouttaki, H.; Folmsbee, M.; Knapp, R.; Nagle, D.

2003-01-24T23:59:59.000Z

52

Chapter 4.1: Graduate Career and Professional Development1  

E-Print Network [OSTI]

to graduate career & professional development are: Goal: Create an effective and sustainable professionalChapter 4.1: Graduate Career and Professional Development1 Objectives & Goals Objective: Increase and improve career & professional development opportunities for graduate students Our two goals related

53

Advanced Hydrogen Turbine Development  

SciTech Connect (OSTI)

Siemens has developed a roadmap to achieve the DOE goals for efficiency, cost reduction, and emissions through innovative approaches and novel technologies which build upon worldwide IGCC operational experience, platform technology, and extensive experience in G-class operating conditions. In Phase 1, the technologies and concepts necessary to achieve the program goals were identified for the gas turbine components and supporting technology areas and testing plans were developed to mitigate identified risks. Multiple studies were conducted to evaluate the impact in plant performance of different gas turbine and plant technologies. 2015 gas turbine technologies showed a significant improvement in IGCC plant efficiency, however, a severe performance penalty was calculated for high carbon capture cases. Thermodynamic calculations showed that the DOE 2010 and 2015 efficiency targets can be met with a two step approach. A risk management process was instituted in Phase 1 to identify risk and develop mitigation plans. For the risks identified, testing and development programs are in place and the risks will be revisited periodically to determine if changes to the plan are necessary. A compressor performance prediction has shown that the design of the compressor for the engine can be achieved with additional stages added to the rear of the compressor. Tip clearance effects were studied as well as a range of flow and pressure ratios to evaluate the impacts to both performance and stability. Considerable data was obtained on the four candidate combustion systems: diffusion, catalytic, premix, and distributed combustion. Based on the results of Phase 1, the premixed combustion system and the distributed combustion system were chosen as having the most potential and will be the focus of Phase 2 of the program. Significant progress was also made in obtaining combustion kinetics data for high hydrogen fuels. The Phase 1 turbine studies indicate initial feasibility of the advanced hydrogen turbine that meets the aggressive targets set forth for the advanced hydrogen turbine, including increased rotor inlet temperature (RIT), lower total cooling and leakage air (TCLA) flow, higher pressure ratio, and higher mass flow through the turbine compared to the baseline. Maintaining efficiency with high mass flow Syngas combustion is achieved using a large high AN2 blade 4, which has been identified as a significant advancement beyond the current state-of-the-art. Preliminary results showed feasibility of a rotor system capable of increased power output and operating conditions above the baseline. In addition, several concepts were developed for casing components to address higher operating conditions. Rare earth modified bond coat for the purpose of reducing oxidation and TBC spallation demonstrated an increase in TBC spallation life of almost 40%. The results from Phase 1 identified two TBC compositions which satisfy the thermal conductivity requirements and have demonstrated phase stability up to temperatures of 1850 C. The potential to join alloys using a bonding process has been demonstrated and initial HVOF spray deposition trials were promising. The qualitative ranking of alloys and coatings in environmental conditions was also performed using isothermal tests where significant variations in alloy degradation were observed as a function of gas composition. Initial basic system configuration schematics and working system descriptions have been produced to define key boundary data and support estimation of costs. Review of existing materials in use for hydrogen transportation show benefits or tradeoffs for materials that could be used in this type of applications. Hydrogen safety will become a larger risk than when using natural gas fuel as the work done to date in other areas has shown direct implications for this type of use. Studies were conducted which showed reduced CO{sub 2} and NOx emissions with increased plant efficiency. An approach to maximize plant output is needed in order to address the DOE turbine goal for 20-30% reduction o

Joesph Fadok

2008-01-01T23:59:59.000Z

54

Essays in Development Economics  

E-Print Network [OSTI]

Handbook of Development Economics, Volume I (pp. 713-762).Journal of Development Economics, 81, 80-96. Behrman, JereJournal of Development Economics, 79, 349-373. Dercon,

Hicks, Joan Hamory

2009-01-01T23:59:59.000Z

55

COMING SOON DEVELOPMENT  

E-Print Network [OSTI]

COMING SOON DEVELOPMENT ENGINEERING THE JOURNAL OF ENGINEERING IN ECONOMIC DEVELOPMENT. · Rigorous analysis of existing development "solutions" through an engineering or economic lens. FOR MORE, interdisciplinary journal applying engineering and economic research to the problems of poverty. Published studies

Jacobs, Lucia

56

Training and Organizational Development  

E-Print Network [OSTI]

Training and Organizational Development Contact: Ellen Audley Assistant, (970) 491-1376, Ellen 1 of 5 This office coordinates training and development opportunities for personal and professional and state classified personnel. Customized training and orga- nizational development consulting services

57

Training and Organizational Development  

E-Print Network [OSTI]

Training and Organizational Development Contact: Ellen Audley Assistant, 491-1376, Ellen coordinates training and development opportunities for personal and professional growth for Colorado State. Customized training and organizational development consulting services are also available. Class Locations

Stephens, Graeme L.

58

Training and Organizational Development  

E-Print Network [OSTI]

Training and Organizational Development Contact: Ellen Audley Assistant, 491-1376, Ellen coordinates training and development opportunities for personal and professional growth for Colorado State. Customized training and organizational development consulting services are also available. Class Location

Stephens, Graeme L.

59

Training and Organizational Development  

E-Print Network [OSTI]

Training and Organizational Development Contact: Ellen Audley Assistant, (970) 491-1376, Ellen training and development opportunities for personal and professional growth for Colorado State University training and organiza- tional development consulting services are also available. Class Location: Johnson

60

Training and Organizational Development  

E-Print Network [OSTI]

Training and Organizational Development Contact: Ellen Audley Assistant, 491-1376, Ellen training and development opportunities for personal and professional growth for Colorado State University training and organizational development consulting services are also available. Class Location: Johnson

Stephens, Graeme L.

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Sustainable Development at University.  

E-Print Network [OSTI]

?? After the Rio United Nations Conference on Enviroment and Development, the need of sustainable development obtained recognition from the vast majority of countries and… (more)

Yao, Zhilei

2010-01-01T23:59:59.000Z

62

Regional Development Authorities (Indiana)  

Broader source: Energy.gov [DOE]

This legislation authorizes the establishment of local development authorities in Indiana. A development authority established under this law may acquire, construct, equip, own, lease, and finance...

63

ORISE: Web Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Web Development As computer-based applications become increasingly popular for the delivery of health care training and information, the need for Web development in support of...

64

NITINOL ENGINE DEVELOPMENT  

E-Print Network [OSTI]

20, 1976 LBL-5293 NITINOL ENGINE DEVELOPMENT Ridgway Banksof California. NITINOL ENGINE DEVELOPMENT Ridgway Banks andof practical heat engines based on this phenomenon is

Banks, Ridgway

2013-01-01T23:59:59.000Z

65

Coal Development (Nebraska)  

Broader source: Energy.gov [DOE]

This section provides for the development of newly-discovered coal veins in the state, and county aid for such development.

66

SUSTAINABLE DEVELOPMENT REPORT  

E-Print Network [OSTI]

­ Encourage research and innovation in sustainable development 14 - Standard of Living, EconomySUSTAINABLE DEVELOPMENT REPORT 2011-2012 #12;2 Table of Contents UNIVERSIT� LAVAL AT A GLANCE 3 A WORD FROM THE RECTOR 4 A WORD FROM THE EXECUTIVE VICE-RECTOR, DEVELOPMENT 5 SUSTAINABLE DEVELOPMENT

Laval, Université

67

Geothermal development opportunities in developing countries  

SciTech Connect (OSTI)

This report is the proceedings of the Seminar on geothermal development opportunities in developing countries, sponsored by the Geothermal Division of the US Department of Energy and presented by the National Geothermal Association. The overall objectives of the seminar are: (1) Provide sufficient information to the attendees to encourage their interest in undertaking more geothermal projects within selected developing countries, and (2) Demonstrate the technological leadership of US technology and the depth of US industry experience and capabilities to best perform on these projects.

Kenkeremath, D.C.

1989-11-16T23:59:59.000Z

68

New methodical developments for GRANIT  

SciTech Connect (OSTI)

New methodical developments for the GRANIT spectrometer address further improvements of the critical parameters of this experimental installation, as well as its applications to new fields of research. Keeping in mind an extremely small fraction of ultra cold neutrons (UCN) that could be bound in gravitational quantum states, we look for methods to increase statistics due to: developing UCN sources with maximum phase-space density, counting simultaneously a large fraction of neutrons using position-sensitive detectors, and decreasing detector backgrounds. Also we explore an eventual application of the GRANIT spectrometer beyond the scope of its initial goals, for instance, for reflectometry with UCN.

Baessler, Stefan [ORNL; Nesvizhevsky, V. [ Inst Max Von Laue Paul Langevin, F-38042 Grenoble 9, France; Toperverg, B [Ruhr University, Bochum, Germany; Zhernenkov, K. [Ruhr University, Bochum, Germany; Gagarski, A [Petersburg Nuclear Physics Institute, Gatchina, Russia; Lychagin, E [Joint Institute for Nuclear Research, Dubna, Russia; Muzychka, A [Joint Institute for Nuclear Research, Dubna, Russia; Strelkov, A [Joint Institute for Nuclear Research, Dubna, Russia; Mietke, A [Technische Universitat Dresden

2011-01-01T23:59:59.000Z

69

Solar photovoltaics for development applications  

SciTech Connect (OSTI)

This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.

Shepperd, L.W. [Florida Solar Energy Center, Cape Canaveral, FL (United States)] [Florida Solar Energy Center, Cape Canaveral, FL (United States); Richards, E.H. [Sandia National Labs., Albuquerque, NM (United States)] [Sandia National Labs., Albuquerque, NM (United States)

1993-08-01T23:59:59.000Z

70

Development of Spintronic Bandgap Materials  

SciTech Connect (OSTI)

The development of Ge/Si quantum dots with high spatial precision has been pursued, with the goal of developing a platform for “spintronics bandgap materials”. Quantum dots assemblies were grown by molecular beam epitaxy on carbon-templated silicon substrates. These structures were characterized by atomic force microscopy. Vertically gated structures were created on systems with up to six well-defined quantum dots with a controlled geometric arrangement, and low-temperature (mK) transport experiments were performed. These experiments showed evidence for a crossover from diamagnetic to Zeeman energy shifts in resonant tunneling of electrons through electronic states in the quantum dots.

Levy, Jeremy; Awschalom, David; Floro, Jerrold

2014-02-16T23:59:59.000Z

71

Essays on institutions in developing economies  

E-Print Network [OSTI]

The primary goal of this thesis is to gain a deeper understanding of how institutional structure responds and evolves in equilibrium, particularly in the idiosyncratic and dynamic settings of developing economies. I use ...

Wang, Xiao Yu, Ph. D. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

72

Developing a Motor Management Policy at BASF  

E-Print Network [OSTI]

In early 1998 Thomas R. Theising, BASF Corporate Engineering initiated the formation of a motor management team. The goal of the team was to develop a Motor Management Guideline to better manage the purchase and repair of motors used throughout...

Zickefoose, B.; Theising, T. R.

73

Lean Product Development: Making Waste Transparent  

E-Print Network [OSTI]

Lean manufacturing developed by Toyota is a production philosophy that focuses on streamlining of value added activities and eliminating waste within the process with the goal to better meet customer demand. It constitutes ...

Bauch, Christoph

2004-01-15T23:59:59.000Z

74

Geothermal Energy Research Development and Demonstration Program  

SciTech Connect (OSTI)

The Federal program's goal, strategy, plans, and achievements are summarized. In addition, geothermal development by state and local governments and, where available, by the private sector is described. (MHR)

Not Available

1980-06-01T23:59:59.000Z

75

Hanford Site Development Plan  

SciTech Connect (OSTI)

The Hanford Site Development Plan (Site Development Plan) is intended to guide the short- and long-range development and use of the Hanford Site. All acquisition, development, and permanent facility use at the Hanford Site will conform to the approved plan. The Site Development Plan also serves as the base document for all subsequent studies that involve use of facilities at the Site. This revision is an update of a previous plan. The executive summary presents the highlights of the five major topics covered in the Site Development Plan: general site information, existing conditions, planning analysis, Master Plan, and Five-Year Plan. 56 refs., 67 figs., 31 tabs.

Rinne, C.A.; Curry, R.H.; Hagan, J.W.; Seiler, S.W.; Sommer, D.J. (Westinghouse Hanford Co., Richland, WA (USA)); Yancey, E.F. (Pacific Northwest Lab., Richland, WA (USA))

1990-01-01T23:59:59.000Z

76

Essays in Development Economics  

E-Print Network [OSTI]

Discontinuity Designs in Economics," Journal of EconomicJournal of Development Economics 87(1): 57-75. [21] Ozier,Journal of Development Economics 94, 151-163. [9] Delavande,

Keats, Anthony

2012-01-01T23:59:59.000Z

77

China Business Development  

E-Print Network [OSTI]

China Business Development Postgraduate Programme #12;Programme: China Business Development with China: Intercultural Management 3 1 Daily life and business behaviour explained from a cultural perspective Chinese strategic thinking China's political constellation and its impact on business life Human

Einmahl, Uwe

78

DEVELOPING STATE POLICIES SUPPORTIVE OF BIOENERGY DEVELOPMENT  

SciTech Connect (OSTI)

Working within the context of the Southern States Biobased Alliance (SSBA) and with officials in each state, the Southern States Energy Board (SSEB) is identifying bioenergy-related policies and programs within each state to determine their impact on the development, deployment or use of bioenergy. In addition, SSEB will determine which policies have impacted industry's efforts to develop, deploy or use biobased technologies or products. As a result, SSEB will work with the Southern States Biobased Alliance to determine how policy changes might address any negative impacts or enhance positive impacts. In addition to analysis of domestic policies and programs, this project will include the development of a U.S.-Brazil Biodiesel Pilot Project. The purpose of this effort is to promote and facilitate the commercialization of biodiesel and bioenergy production and demand in Brazil.

Kathryn Baskin

2004-07-28T23:59:59.000Z

79

DEVELOPING STATE POLICIES SUPPORTIVE OF BIOENERGY DEVELOPMENT  

SciTech Connect (OSTI)

Working within the context of the Southern States Biobased Alliance (SSBA) and with officials in each state, the Southern States Energy Board (SSEB) is identifying bioenergy-related policies and programs within each state to determine their impact on the development, deployment or use of bioenergy. In addition, SSEB will determine which policies have impacted industry's efforts to develop, deploy or use biobased technologies or products. As a result, SSEB will work with the Southern States Biobased Alliance to determine how policy changes might address any negative impacts or enhance positive impacts. In addition to analysis of domestic policies and programs, this project will include the development of a U.S.-Brazil Biodiesel Pilot Project. The purpose of this effort is to promote and facilitate the commercialization of biodiesel and bioenergy production and demand in Brazil.

Kathryn Baskin

2005-04-30T23:59:59.000Z

80

DEVELOPING STATE POLICIES SUPPORTIVE OF BIOENERGY DEVELOPMENT  

SciTech Connect (OSTI)

Working within the context of the Southern States Biobased Alliance (SSBA) and with officials in each state, the Southern States Energy Board (SSEB) is identifying bioenergy-related policies and programs within each state to determine their impact on the development, deployment or use of bioenergy. In addition, SSEB will determine which policies have impacted industry's efforts to develop, deploy or use biobased technologies or products. As a result, SSEB will work with the Southern States Biobased Alliance to determine how policy changes might address any negative impacts or enhance positive impacts. In addition to analysis of domestic policies and programs, this project will include the development of a U.S.-Brazil Biodiesel Pilot Project. The purpose of this effort is to promote and facilitate the commercialization of biodiesel and bioenergy production and demand in Brazil.

Kathryn Baskin

2004-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

RELAP-7 Development  

Broader source: Energy.gov [DOE]

During the second quarter, the Reactor team drafted software development guidance documents and a software quality assurance plan.

82

Sustainable Development Report  

E-Print Network [OSTI]

Sustainable Development Report 2010-2011 #12;2 Table of Contents Université Laval at a glance 2-2011 highlights 9 University community initiatives 15 Sustainable development educational program 21 Research and creativity in sustainable development 24 Awards, recognition, and distinctions 28 Implementation

Laval, Université

83

Digital Media Developing Digital  

E-Print Network [OSTI]

Developing Digital Media Developing Digital Media Digital Media Case Study During 2012, IT Services component of student and staff development." In terms of the use of digital media for teaching, Mark Dixon this digital content, mentorship of paramedic students was informal and delivered locally. According to Mairéad

84

DEVELOPING STATE POLICIES SUPPORTIVE OF BIOENERGY DEVELOPMENT  

SciTech Connect (OSTI)

Working within the context of the Southern States Biobased Alliance (SSBA) and with officials in each state, the Southern States Energy Board (SSEB) is identifying bioenergy-related policies and programs within each state to determine their impact on the development, deployment or use of bioenergy. In addition, SSEB will determine which policies have impacted industry's efforts to develop, deploy or use biobased technologies or products. As a result, SSEB will work with the Southern States Biobased Alliance to determine how policy changes might address any negative impacts or enhance positive impacts.

Kathryn Baskin

2003-10-31T23:59:59.000Z

85

DEVELOPING STATE POLICIES SUPPORTIVE OF BIOENERGY DEVELOPMENT  

SciTech Connect (OSTI)

Working within the context of the Southern States Biobased Alliance (SSBA) and with officials in each state, the Southern States Energy Board (SSEB) is identifying bioenergy-related policies and programs within each state to determine their impact on the development, deployment or use of bioenergy. In addition, SSEB will determine which policies have impacted industry's efforts to develop, deploy or use biobased technologies or products. As a result, SSEB will work with the Southern States Biobased Alliance to determine how policy changes might address any negative impacts or enhance positive impacts.

Kathryn Baskin

2002-07-31T23:59:59.000Z

86

DEVELOPING STATE POLICIES SUPPORTIVE OF BIOENERGY DEVELOPMENT  

SciTech Connect (OSTI)

Working within the context of the Southern States Biobased Alliance (SSBA) and with officials in each state, the Southern States Energy Board (SSEB) is identifying bioenergy-related policies and programs within each state to determine their impact on the development, deployment or use of bioenergy. In addition, SSEB will determine which policies have impacted industry's efforts to develop, deploy or use biobased technologies or products. As a result, SSEB will work with the Southern States Biobased Alliance to determine how policy changes might address any negative impacts or enhance positive impacts.

Kathryn Baskin

2002-11-01T23:59:59.000Z

87

Westinghouse thermal barrier coatings development  

SciTech Connect (OSTI)

Westinghouse, in conjunction with the Department of Energy and Oak Ridge National Laboratory, has embarked upon a program for the development of advanced thermal barrier coatings for industrial gas turbines. Development of thermal barrier coatings (TBC`s) for industrial gas turbines has relied heavily on the transfer of technology from the aerospace industry. Significant differences in the time/temperature/stress duty cycles exist between these two coating applications. Coating systems which perform well in aerospace applications may not been optimized to meet power generation performance requirements. This program will focus on development of TBC`s to meet the specific needs of power generation applications. The program is directed at developing a state-of-the-art coating system with a minimum coating life of 25,000 hours at service temperatures required to meet increasing operating efficiency goals. Westinghouse has assembled a team of university and industry leaders to accomplish this goal. Westinghouse will coordinate the efforts of all program participants. Chromalloy Turbine Technologies, Inc. and Sermatech International, Inc. will be responsible for bond coat and TBC deposition technology. Praxair Specialty Powders, Inc. will be responsible for the fabrication of all bond coat and ceramic powders for the program. Southwest Research Institute will head the life prediction modelling effort; they will also be involved in coordinating nondestructive evaluation (NDE) efforts. Process modelling will be provided by the University of Arizona.

Goedjen, J.G.; Wagner, G. [Westinghouse Electric Corp., Orlando, FL (United States)

1995-10-01T23:59:59.000Z

88

Program development fund: FY 1987  

SciTech Connect (OSTI)

It is the objective of the Fund to encourage innovative research to maintain the Laboratory's position at the forefront of science. Funds are used to explore new ideas and concepts that may potentially develop into new directions of research for the Laboratory and that are consistent with the major needs, overall goals, and mission of the Laboratory and the DOE. The types of projects eligible for support from PDF include: work in forefront areas of science and technology for the primary purpose of enriching Laboratory research and development capabilities; advanced study of new hypotheses, new experimental concepts, or innovative approaches to energy problems; experiments directed toward ''proof of principle'' or early determination of the utility of a new concept; and conception, design analyses, and development of experimental devices, instruments, or components. This report is a review of these research programs.

Not Available

1989-03-01T23:59:59.000Z

89

Essays in Development Economics  

E-Print Network [OSTI]

are weak,” Review of Economics and Statistics, 2004, 86,Essays in Development Economics A dissertation submitted indegree Doctor of Philosophy in Economics by Samuel Ali Bazzi

Bazzi, Samuel Ali

90

Individual Development Plan  

Broader source: Energy.gov [DOE]

To be effective, training decisions made at the organizational and departmental levels must be informed by the needs of the individual. An individual development plan (IDP) is cooperatively...

91

USER MANUAL Developers  

E-Print Network [OSTI]

Foundation, US Department of Energy Primary developers: Darius Abramavicius: 2003 -- 2010 (initiator) Wei.......................................................................7 3 Basic usage and functionality.....................................................................................13 A. System Made of Known Energy Levels...........................................................14

Mukamel, Shaul

92

Validated SCR Concept Development  

Broader source: Energy.gov (indexed) [DOE]

* CAE package study (urea tank, exhaust line) * Kinetic aftertreatment modeling (1D -> 3D) -> Validated model chain SCR concept development: * Optimization of SCR concept: *...

93

Attitudes towards sustainable development.  

E-Print Network [OSTI]

??The purpose of this thesis is to offer up to date information on the international students’ knowledge and attitude towards sustainable development in Oulu University… (more)

Olkinuora, Veera

2014-01-01T23:59:59.000Z

94

Growth & Development / Parental Care  

E-Print Network [OSTI]

participate; if one parents is lost, fledging rates usually drop #12;Winkler reduced clutch size from 5 to 3Growth & Development / Parental Care #12;Embryonic Development Although the sequence of 42 stages the egg The hatching muscle helps the chick break out of the egg Parents typically dispose of the egg

Butler, Christopher J.

95

Technical Assistance to Developers  

SciTech Connect (OSTI)

This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

Rockward, Tommy [Los Alamos National Laboratory; Borup, Rodney L. [Los Alamos National Laboratory; Garzon, Fernando H. [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Spernjak, Dusan [Los Alamos National Laboratory

2012-07-17T23:59:59.000Z

96

Development Michael Short  

E-Print Network [OSTI]

power plant for buses PEM fuel cell, 120 kW, hydrogen Automotive fuel cell systems for primary power PEM and technology development PEM fuel cell, 5 kW, hydrogen Fuel cell system for the Space Shuttle Orbiter Alkaline fuel cell development Continued commercialization Reduce product cost Reduce size and weight Increase

97

Wind Economic Development (Postcard)  

SciTech Connect (OSTI)

The U.S. Department of Energy's Wind Powering America initiative provides information on the economic development benefits of wind energy. This postcard is a marketing piece that stakeholders can provide to interested parties; it will guide them to the economic development benefits section on the Wind Powering America website.

Not Available

2011-08-01T23:59:59.000Z

98

Sun Academic Developer Program  

E-Print Network [OSTI]

Sun Academic Developer Program Kim Jones Vice President Government, Education & Health Care Sun Microsystems, Inc. FY08 Campus Ambassador Programme Your Name Here Sun Microsystems, Inc. #12;2 FY08 Campus Ambassador Programme #12;3 Sun Academic Developer Initiative On-Campus Events and Contests Open Source

McCusker, Guy

99

Introducing Web Application Development  

E-Print Network [OSTI]

Introducing Web Application Development Instructor: Dr Wei Ding Development Instructor: Dr.Wei Ding Fall 2009 1CS 437/637 Database-BackedWeb Sites andWeb Services Introduction: Internet vs. World Wide Web Internet is an interconnected network of thousands ofInternet is an interconnected network

Ding, Wei

100

Internet Polling Development Report  

E-Print Network [OSTI]

, and the development of a polling engine to launch the above procedures and pass the data on to the database server. This final report describes the automated polling procedures that have been developed for Synergistic, Highland and ABB loggers. This report also...

Klima, P.; Lockhart, D.; Haberl, J. S.

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

United Nations Development Programme  

E-Print Network [OSTI]

Energy Concessions: Pilot Programs 7.5. Modernising Corn Stover Use in Rural Jilin Province, China 7United Nations Development Programme Bureau for Development Policy Energy and Atmosphere Programme. #12;5 Acknowledgements 6 Notes on Authors 7 Foreword 9 Executive Summary 27 Introduction: Energy

102

Dominican Republic-Fast-Track Development of TransformativeClimate...  

Open Energy Info (EERE)

Finally, an additional goal is to return the experiences made to the international political level." References "Fast-Track Development of Transformative Climate-Compatible...

103

High-Temperature Solar Selective Coating Development for Power...  

Broader source: Energy.gov (indexed) [DOE]

are low risk Goal: Develop solar selective coatings for next- generation concentrated solar power towers that exhibit high absorptance with low thermal emittance, that can...

104

ORNL signs agreement with Whirlpool Corp. to develop new energy...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

with current models. The goal of the cooperative research and development agreement, or CRADA, is to make a next-generation household refrigerator more energy efficient by using...

105

Individual Development Plan for WELCOME,DEADRA H from  

Broader source: Energy.gov (indexed) [DOE]

Workshop: Smarter Leaner Training 0 0 0 0 TBD 04092013 Short Range Goal 2: To enhance workforce planning competency Development Continuing Education Course name: Attend...

106

Development of Large Format Lithium Ion Cells with Higher Energy...  

Broader source: Energy.gov (indexed) [DOE]

Overall Project Goal: To research, develop and demonstrate large format lithium ion cells with energy density > 500 WhL Barriers addressed: - Low energy density - Cost -...

107

Sandia National Laboratories: Goal 2: Development of Prognostics...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Generator Modeling Radar Friendly Blades Special Programs Techno-Economic Modeling, Analysis, and Support Analysis, Modeling, Cost of Energy, and Policy Impact: Wind Vision 2014...

108

Goal setting for improvement in product development performance of organizations  

E-Print Network [OSTI]

Companies have been constantly trying for ways and means to improve R&D performance as it is one of the most important competitive advantage tools of an organization. Literature review on R&D performance improvement suggests ...

Kashyap, Pankaj Kumar

2013-01-01T23:59:59.000Z

109

UN Millennium Development Goal 1 Eradicate Extreme Poverty and Hunger  

E-Print Network [OSTI]

, and higher food and energy prices on the poor are minimized. · Increase emergency food aid to enable WFP consumption · Achieve full and productive employment and decent work for all. Measures: 1.4 Growth rate of GDP/person employed 1.5 Employment to population ratio 1.6 Proportion of employed people living per day 1

Wisconsin at Madison, University of

110

106 | Triennial Scientific Report EC-EARTH: goals, developments  

E-Print Network [OSTI]

Earth'sglobalclimatesystemisstrongly affectedbytheinteractionsbetweenitsvarioussubsys- tems1) .Asaresult,attentionhasshiftedtothedevelop- mentofEarthSystemModels

Stoffelen, Ad

111

Sandia National Laboratories: Goal 2: Development of Prognostics and Health  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive SolarEducation Programs:CRFProvideAidsCanal,

112

Reaching the Millennium Development Goals in South Asia  

E-Print Network [OSTI]

and maternal mortality, low primary school enrolment and completion rates, poor rural infrastructure and low rates of access to safe drinking water and sanitation, especially in rural areas. Nirupam Bajpai

113

Energy Development Opportunities for Wyoming  

SciTech Connect (OSTI)

The Wyoming Business Council, representing the state’s interests, is participating in a collaborative evaluation of energy development opportunities with the NGNP Industry Alliance (an industry consortium), the University of Wyoming, and the US Department of Energy’s Idaho National Laboratory. Three important energy-related goals are being pursued by the State of Wyoming: Ensuring continued reliable and affordable sources of energy for Wyoming’s industries and people Restructuring the coal economy in Wyoming Restructuring the natural gas economy in Wyoming

Larry Demick

2012-11-01T23:59:59.000Z

114

Development of New Thermodynamic Cycles  

SciTech Connect (OSTI)

In general, optimization is a way to find the best solution to a problem of any kind. We do a lot of optimization in our daily life. For example, we always search for the best product, which meets our demands, with the lowest possible price. In engineering, optimization is a very powerful tool. There is usually more than one acceptable solution to an engineering problem. The goal of an engineer is to find the best one. When there are more than a few acceptable solutions, it may be simply impossible to compare them by hand. More sophisticated mathematical methods have been developed to help find the best solution.

D. Yogi Goswami

2002-04-30T23:59:59.000Z

115

Microsystem product development.  

SciTech Connect (OSTI)

Over the last decade the successful design and fabrication of complex MEMS (MicroElectroMechanical Systems), optical circuits and ASICs have been demonstrated. Packaging and integration processes have lagged behind MEMS research but are rapidly maturing. As packaging processes evolve, a new challenge presents itself, microsystem product development. Product development entails the maturation of the design and all the processes needed to successfully produce a product. Elements such as tooling design, fixtures, gages, testers, inspection, work instructions, process planning, etc., are often overlooked as MEMS engineers concentrate on design, fabrication and packaging processes. Thorough, up-front planning of product development efforts is crucial to the success of any project.

Polosky, Marc A.; Garcia, Ernest J.

2006-04-01T23:59:59.000Z

116

Developing osteoarthritis treatments through cartilage tissue engineering and molecular imaging  

E-Print Network [OSTI]

Tissue engineering can be applied to develop therapeutic techniques for osteoarthritis, a degenerative disease caused by the progressive deterioration of cartilage in joints. An inherent goal in developing cartilage-replacement ...

Casasnovas Ortega, Nicole

2012-01-01T23:59:59.000Z

117

Developing biotechnology company's future positioning strategy in prefilled syringe market  

E-Print Network [OSTI]

The primary goal for the thesis is to develop a recommendation for Amgen's future prefilled syringe strategy related to its drug process development, supplier relationship management plan, supply and sourcing, and procurement. ...

Lee, Joonhaeng, S.M. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

118

Senior Director Student Development  

E-Print Network [OSTI]

Senior Director Student Development & Services Janet Teasdale Assistant to the Vice President, Conferences & Food Operations (dual campus) Andrew Parr Chaplains Roberta Fraser Inter-Fraternity & Panhellenic Community Service Learning Margot Fryer Alma Mater Society UBCV Graduate Student Society UBCV

Michelson, David G.

119

Essays on development finance  

E-Print Network [OSTI]

This thesis consists of three essays that examine investment choices in less developed countries. Chapter 1 examines how the structure of existing microfinance contracts may discourage risky but high-expected return ...

Fischer, Gregory M. (Gregory Mark)

2008-01-01T23:59:59.000Z

120

Renewable Development Fund (RDF)  

Broader source: Energy.gov [DOE]

Xcel Energy's Renewable Development Fund (RDF) was created in 1999 pursuant to the 1994 Radioactive Waste Management Facility Authorization Law (Minn. Stat. § 116C.779). Originally, Xcel Energy was...

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Scott Koenig Development Officer  

E-Print Network [OSTI]

Scott Koenig Development Officer Teri Lucie Thompson Senior Vice President & CMO UA FOUNDAT I/TV Station Mgr Frank Fregoso Chief Engineer Cheech Calenti IT Manager Ed Kesterson Radio Program Dir. AHSC

Utzinger, Urs

122

Community Development Fund (Illinois)  

Broader source: Energy.gov [DOE]

The Community Development Fund is a partnership between the Illinois Department of Commerce and Economic Opportunity (DCEO) and financial institutions. Up to $5 million in micro loans is available...

123

Laboratory Directed Research & Development  

E-Print Network [OSTI]

......................................................................43 Measuring Dark Energy and Dark Matter Using Gravitational Lensing ............................................................11 Development of an Ultrafast Electron Diffraction Facility for Condensed Matter Physics Challenges Electrochemical Fuel Generation from Water and Carbon Dioxide..............................................19

Ohta, Shigemi

124

Political elites and development  

E-Print Network [OSTI]

This dissertation consists of three essays on the behavior of political elites and their effect on economic development. The first two chapters focus on political dynasties in the Philippines while the third chapter analyzes ...

Querubín Borrero, Pablo

2010-01-01T23:59:59.000Z

125

Advanced Interconnect Development  

SciTech Connect (OSTI)

The objectives of this project are to develop cost-effective, optimized materials for intermediate temperature SOFC interconnect and interconnect/electrode interface applications and identify and understand degradation processes in interconnects and at their interfaces with electrodes.

Yang, Z.G.; Maupin, G.; Simner, S.; Singh, P.; Stevenson, J.; Xia, G.

2005-01-27T23:59:59.000Z

126

Sustaining development in Detroit  

E-Print Network [OSTI]

The intent of this thesis is to propose a strategy for stabilizing and increasing the disparate pieces of development that form the traces of the once great industrial city of Detroit. It focuses primarily on Fordism as a ...

Resnick, Noah Samuel, 1977-

2004-01-01T23:59:59.000Z

127

USABC Battery Separator Development  

Broader source: Energy.gov (indexed) [DOE]

Separator Development P.I. - Ron Smith Presenter - Kristoffer Stokes, Ph.D. Celgard, LLC Project ID ES007 May 10, 2011 This presentation does not contain any proprietary,...

128

Acquisition Career Development Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order establishes training and certification requirements and career development programs under the Acquisition Career Development (ACD) Program for DOE and NNSA acquisition workforce. The acquisition workforce includes contracting, purchasing, personal property management, program management, Contracting Officers and Contracting Officer Representatives. The ACD Program implements the Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the objectives of Executive Order (E.O.) 129231, Federal Procurement Reform, dated 10-13-1994. This order cancels DOE O 361.1, Acquisition Career Development Program, dated 11-10-99, AND Acquisition Letter 2003-05, Personal Property Management Career Development, Training, and Certification Program, dated 9-10-03. Cancels DOE O 361.1 Chg 2. Canceled by DOE O 361.1B.

2004-04-19T23:59:59.000Z

129

Essays on development economics  

E-Print Network [OSTI]

This dissertation is a collection of three independent papers in empirical development economics. The first chapter studies the effect of a family planning program in Bangladesh, which successfully reduced fertility, on ...

Ruthbah, Ummul Hasanath

2007-01-01T23:59:59.000Z

130

Cybersecurity Framework Development Overview  

E-Print Network [OSTI]

Cybersecurity Framework Development Overview NIST's Role in Implementing Executive Order 13636 "Improving Critical Infrastructure Cybersecurity" #12;Executive Order 13636: Improving Critical Infrastructure Cybersecurity - February 12, 2013 "The cyber threat to critical infrastructure continues to grow

Bentz, Dale P.

131

Cybersecurity Framework Development Overview  

E-Print Network [OSTI]

Cybersecurity Framework Development Overview NIST's Role in Implementing Executive Order 13636 "Improving Critical Infrastructure Cybersecurity" #12;Executive Order 13636: Improving Critical Infrastructure Cybersecurity February 12, 2013 · "The cyber threat to critical infrastructure continues to grow

132

Development Opportunity Zone Credit  

Broader source: Energy.gov [DOE]

The Development Opportunity Zone Credits incent new and expanding businesses in the Cities of Beloit, Janesville and Kenosha by providing non-refundable tax credits to assist with the creation and...

133

Training and Development  

E-Print Network [OSTI]

Training and Development Administration Assistant Vice Chancellor Lori Castro VC Business Senior Manager Conflict Resolution Nancy Heischman Training Coordinator Vacant Principal Technical Training Consultant Frank Widman Health Care Facilitator / Interim Benefits Manager Frank Trueba Disability

California at Santa Cruz, University of

134

NOx Sensor Development  

Broader source: Energy.gov (indexed) [DOE]

needed to meet emission targets and enable widespread use of diesel vehicles with better fuel economies: We are developing a novel sensor with the potential to meet OEM cost and...

135

Microbioreactors for bioprocess development  

E-Print Network [OSTI]

This thesis presents the design, fabrication, and characterization of a microbioreactor integrated with automated sensors and actuators as a step towards high-throughput bioprocess development. In particular, this thesis ...

Zhang, Zhiyu, Ph. D. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

136

Recent developments: Industry briefs  

SciTech Connect (OSTI)

This article is the `Industry Briefs` portion of Nuexco`s July 1992 `Recent Developments` section. Specific items mentioned include: (1) the merger of Entergy and Gulf States Utilities, (2) restart of the Sequoyah Fuels facility in Oklahoma, (3) development of the 7th and 8th nuclear units in Taiwan, (4) purchase of interest in Rio Algom, Ltd, and (5) acquisition of the Italian firm AGIP by a Canadian company.

NONE

1992-07-01T23:59:59.000Z

137

Acquisition Career Development Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To set forth requirements and responsibilities for the Department of Energy (DOE) Acquisition Career Development (ACD) Program, which implements Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the career development objectives of Executive Order (E.O.) 12931. Change 1 approved 12-20-2001. Cancels DOE O 361.1. Canceled by DOE O 361.1 Chg 2.

2001-12-20T23:59:59.000Z

138

Acquisition Career Development Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To set forth requirements and responsibilities for the Department of Energy (DOE) Acquisition Career Development (ACD) Program, which implements Office of Federal Procurement Policy (OFPP) requirements, Federal Acquisition Regulation (FAR) requirements, Federal Acquisition Reform Act (FARA) requirements, and the career development objectives of Executive Order (E.O.) 12931. Change 1 approved 12-20-2001. Change 2 approved 06-13-03. Cancels DOE O 361.1 Chg 1. Canceled by DOE O 361.1A.

2003-06-13T23:59:59.000Z

139

What is Community Development?  

E-Print Network [OSTI]

and community colleges: http://www.sbaonline.sba.gov/sbdc/ Physical, Natural and Cultural Resources ? TEX*A*SYST: http://waterhome.brc.tamus.edu ? Onsite Wastewater Treatment: http://ossf.tamu.edu ? Entrepreneurship Resources: http...: Community Development Programming Resources Focus Resources General ? Texas AgriLife Extension Service Educational Resource Center: http://agrilifebookstore.org ? Southern Rural Development Center: http://srdc.msstate.edu ? Appropriate Technology Transfer...

Taylor, Greg

2009-04-01T23:59:59.000Z

140

Process Development for Nanostructured Photovoltaics  

SciTech Connect (OSTI)

Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy for our nation. However, the high-temperature manufacturing processes used for conventional silicon-based photovoltaics are extremely energy-intensive and expensive. This high cost imposes a critical barrier to the widespread implementation of photovoltaic technology. Argonne National Laboratory and its partners recently invented new methods for manufacturing nanostructured photovoltaic devices that allow dramatic savings in materials, process energy, and cost. These methods are based on atomic layer deposition, a thin film synthesis technique that has been commercialized for the mass production of semiconductor microelectronics. The goal of this project was to develop these low-cost fabrication methods for the high efficiency production of nanostructured photovoltaics, and to demonstrate these methods in solar cell manufacturing. We achieved this goal in two ways: 1) we demonstrated the benefits of these coatings in the laboratory by scaling-up the fabrication of low-cost dye sensitized solar cells; 2) we used our coating technology to reduce the manufacturing cost of solar cells under development by our industrial partners.

Elam, Jeffrey W.

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Sustainable Development Summer Intern Report 2013 Sustainable Development Summer Intern  

E-Print Network [OSTI]

Sustainable Development Summer Intern Report 2013 Sustainable Development Summer Intern Final amongst university's invested in sustainable development. Our small but mighty size allows us to build through positive sustainable practices. As the Sustainable Development Summer Intern I am fortunate enough

142

Sustainable Development Summer Intern Report 2010 Sustainable Development Summer Intern  

E-Print Network [OSTI]

Sustainable Development Summer Intern Report 2010 1 Sustainable Development Summer Intern Final of Bishop's University. The role of the Sustainable Development Summer Intern (SDSI) is to coordinate and organize sustainable development information and activities during the summer months. Ensuring

143

Climate Change, Adaptation, and Development  

E-Print Network [OSTI]

developing countries "can significantly offset the adverse effects of climate change").Climate Change, 2 which calls on developed countries (but not developing countries)developing countries that will bear the bulk of the effects of climate change.

Cole, Daniel H.

2008-01-01T23:59:59.000Z

144

Emergency Response Guideline Development  

SciTech Connect (OSTI)

Task 5 of the collaborative effort between ORNL, Brazil, and Westinghouse for the International Nuclear Energy Research Initiative entitled “Development of Advanced Instrumentation and Control for an Integrated Primary System Reactor” focuses on operator control and protection system interaction, with particular emphasis on developing emergency response guidelines (ERGs). As in the earlier tasks, we will use the IRIS plant as a specific example of an integrated primary system reactor (IPSR) design. The present state of the IRIS plant design – specifically, the lack of a detailed secondary system design – precludes establishing detailed emergency procedures at this time. However, we can create a structure for their eventual development. This report summarizes our progress to date. Section 1.2 describes the scope of this effort. Section 2 compares IPSR ERG development to the recent AP1000 effort, and identifies three key plant differences that affect the ERGs and control room designs. The next three sections investigate these differences in more detail. Section 3 reviews the IRIS Safety-by-Design™ philosophy and its impact on the ERGs. Section 4 looks at differences between the IRIS and traditional loop PWR I&C Systems, and considers their implications for both control room design and ERG development. Section 5 examines the implications of having one operating staff control multiple reactor units. Section 6 provides sample IRIS emergency operating procedures (EOPs). Section 7 summarizes our conclusions.

Gary D. Storrick

2007-09-30T23:59:59.000Z

145

Radiochemical method development  

SciTech Connect (OSTI)

The authors have developed methods for chemical characterization of the environment under a multitask project that focuses on improvement of radioanalytical methods with an emphasis on faster and cheaper routine methods. The authors have developed improved methods for separation of environmental levels of technetium-99, radium, and actinides from soil and water; separation of actinides from soil and water matrix interferences; and isolation of strontium. They are also developing methods for simultaneous detection of multiple isotopes (including nonradionuclides) by using a new instrumental technique, inductively coupled plasma-mass spectrometry (ICP-MS). The new ICP-MS methods have greater sensitivity and efficiency and could replace many radiometric techniques. They are using flow injection analysis to integrate and automate the separation methods with the ICP-MS methodology. The final product of all activities will be methods that are available (published in the U.S. Department of Energy`s analytical methods compendium) and acceptable for use in regulatory situations.

Erickson, M.D.; Aldstadt, J.H.; Alvarado, J.S.; Crain, J.S.; Orlandini, K.A.; Smith, L.L.

1994-09-01T23:59:59.000Z

146

Power Systems Development Facility  

SciTech Connect (OSTI)

In support of technology development to utilize coal for efficient, affordable, and environmentally clean power generation, the Power Systems Development Facility (PSDF), located in Wilsonville, Alabama, has routinely demonstrated gasification technologies using various types of coals. The PSDF is an engineering scale demonstration of key features of advanced coal-fired power systems, including a Transport Gasifier, a hot gas particulate control device, advanced syngas cleanup systems, and high-pressure solids handling systems. This final report summarizes the results of the technology development work conducted at the PSDF through January 31, 2009. Twenty-one major gasification test campaigns were completed, for a total of more than 11,000 hours of gasification operation. This operational experience has led to significant advancements in gasification technologies.

Southern Company Services

2009-01-31T23:59:59.000Z

147

2003 NETL Onsite Merit Review Development of Predictive  

E-Print Network [OSTI]

power units (APUs) in commercial diesel truck transport as being sponsored by EERE's Hydrogen, Fuel2003 NETL Onsite Merit Review Development of Predictive Models for Diesel-Based Fuel Processors #12;Diesel Fuel Processing R&D Goal and Objectives · GOAL: Develop fundamental understanding

148

Carbon sequestration research and development  

SciTech Connect (OSTI)

Predictions of global energy use in the next century suggest a continued increase in carbon emissions and rising concentrations of carbon dioxide (CO{sub 2}) in the atmosphere unless major changes are made in the way we produce and use energy--in particular, how we manage carbon. For example, the Intergovernmental Panel on Climate Change (IPCC) predicts in its 1995 ''business as usual'' energy scenario that future global emissions of CO{sub 2} to the atmosphere will increase from 7.4 billion tonnes of carbon (GtC) per year in 1997 to approximately 26 GtC/year by 2100. IPCC also projects a doubling of atmospheric CO{sub 2} concentration by the middle of next century and growing rates of increase beyond. Although the effects of increased CO{sub 2} levels on global climate are uncertain, many scientists agree that a doubling of atmospheric CO{sub 2} concentrations could have a variety of serious environmental consequences. The goal of this report is to identify key areas for research and development (R&D) that could lead to an understanding of the potential for future use of carbon sequestration as a major tool for managing carbon emissions. Under the leadership of DOE, researchers from universities, industry, other government agencies, and DOE national laboratories were brought together to develop the technical basis for conceiving a science and technology road map. That effort has resulted in this report, which develops much of the information needed for the road map.

Reichle, Dave; Houghton, John; Kane, Bob; Ekmann, Jim; and others

1999-12-31T23:59:59.000Z

149

New Mexico renewable development study  

SciTech Connect (OSTI)

Since the early 1990s, Los Alamos National Laboratory (LANL) has applied electric grid models and simulation software to problems of national significance. This effort continues with a variety of other projects funded by the Department of Energy (DOE), other federal and state agencies and private companies. Critical to the success of these programs is the ability to integrate regional-scale models of the electric grid, to assess the propagation of grid impacts, and to present interactively the effect of potential mitigating actions required to stabilize the grid. All of these capabilities are applied in this study, to accomplish the following goals and objectives: (1) Develop an AC power flow model representing future conditions within New Mexico's electric grid, using commercial tools accepted by the utility industry; (2) Conduct a 'screening' analysis of options for accelerating potential renewable energy development through the addition of a statewide transmission collector system; (3) Estimate total revenue needed, jobs created (temporary and permanent) plus indirect and direct impacts to the state's economy; (4) Evaluate potential cost allocation methodology; and (5) Issue a project report that will provide information for policy direction by state regulators, project developers, and legislators.

Toole, Gasper [Los Alamos National Laboratory; Bent, Russell [Los Alamos National Laboratory; Ewers, Mary [Los Alamos National Laboratory

2010-09-17T23:59:59.000Z

150

Renewable Energy Economic Development  

E-Print Network [OSTI]

Renewable Energy Economic Development Dick Sheehy & Nate Monosoff, CH2M HILL March, 2010 #12;Contents 1. Who is CH2M HILL? 2. Why Do We Need Renewables? 3. Where Is The Wind Blowing? 4. Where Is The Sun Shining? 5. How To Catch Some Rays? 6. Renewable Related 2 Proprietary & Confidential #12;Where

151

Technology Forecasting Scenario Development  

E-Print Network [OSTI]

Technology Forecasting and Scenario Development Newsletter No. 2 October 1998 Systems Analysis was initiated on the establishment of a new research programme entitled Technology Forecasting and Scenario and commercial applica- tion of new technology. An international Scientific Advisory Panel has been set up

152

ECH Technology Development  

SciTech Connect (OSTI)

Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 – 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.

Temkin, Richard [MIT

2014-12-24T23:59:59.000Z

153

Global Development Our Responsibility  

E-Print Network [OSTI]

of expertise cover urgent global issues such as food production, energy supply, climate change, biodiversity e ort to address urgent global issues particularly a ecting developing countries e.g. climate change of Communication, 2012 · Project Leader: Karin Nilsson · Graphic Design: Viktor Wrange & Michael Kvick Cover Photo

154

Global developments in MTBE  

SciTech Connect (OSTI)

This paper is intended to provide an overview of some of the recent developments in MTBE demand growth worldwide and the impact of these developments on MTBE demand in the future. It provides a perspective of the influence of developments in the US on the worldwide MTBE markets. The public`s outcry regarding oxygenates in gasoline, and specifically MTBE, that has been evolving in the US during the past several months is in response to a politically mandated requirement for a fuel that contains oxygen that is provided by MTBE or ethanol. This public unrest had negatively impacted the market price for MTBE at the time this paper was being prepared. However, the author believes that MTBE, because of its clean octane capabilities, will continue to be used as an octane blendstock for gasoline in increasing quantities worldwide as we move through lead phasedown in West Europe and other countries that are experiencing pollution problems relating to exhaust emissions from internal combustion engines. The objectives of this paper are as follows: review developments in MTBE demand 1990--2000; identify regions where MTBE demand growth will occur; review production growth for MTBE, both historical and forecast; examine world trade patterns during the period; assess methanol demand growth during the period; analyze MTBE`s regional price bias; and provide a forecast of future MTBE price trends.

Feller, L.W. [CMAI, Houston, TX (United States)

1995-12-31T23:59:59.000Z

155

Graphite Technology Development Plan  

SciTech Connect (OSTI)

This technology development plan is designed to provide a clear understanding of the research and development direction necessary for the qualification of nuclear grade graphite for use within the Next Generation Nuclear Plant (NGNP) reactor. The NGNP will be a helium gas cooled Very High Temperature Reactor (VHTR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Considerable effort will be required to ensure that the graphite performance is not compromised during operation. Based upon the perceived requirements the major data needs are outlined and justified from the perspective of reactor design, reatcor performance, or the reactor safety case. The path forward for technology development can then be easily determined for each data need. How the data will be obtained and the inter-relationships between the experimental and modeling activities will define the technology development for graphite R&D. Finally, the variables affecting this R&D program are discussed from a general perspective. Factors that can significantly affect the R&D program such as funding, schedules, available resources, multiple reactor designs, and graphite acquisition are analyzed.

W. Windes; T. Burchell; R. Bratton

2007-09-01T23:59:59.000Z

156

BIOANALYTICAL DEVELOPMENT OF A  

E-Print Network [OSTI]

- CHLORINATED DIBENZO-p- DIOXINS Evgenia G. Matveeva,1,2,* Elena V. Gribkova,1 James R. Sanborn,2 Shirley J. Gee of California, Davis, California 95616 ABSTRACT A homogeneous immunoassay for dioxins was developed using a phosphorescent label for detection. A dioxin derivative was conjugated to Pt-coproporphyrin. In the assay, when

Hammock, Bruce D.

157

Apple Professional Development Courses  

E-Print Network [OSTI]

Apple Professional Development Courses Spring / Summer 2013 #12;2 Contents Foundation 12th July ­ i ­ Vision and Plan 11 14th June ­ Vision and Plan 11 #12;3 Get the most from your Apple products with MMU. Apple has created a series of workshops which are delivered by independent facilitators. These hands

158

Ocean Engineering Development Team  

E-Print Network [OSTI]

Ocean Engineering Hydrofoil Development Team Justin Eickmeier Mirela Dalanaj Jason Gray Matt test bed for future hydrofoil designs. 5) To create future student interest in the Ocean Engineering Efficiency and Acceleration. #12;Design Team Justin Eickmeier Team Leader Major: Ocean Engineering, Junior

Wood, Stephen L.

159

ENVIRONMENT AND SUSTAINABLE DEVELOPMENT  

E-Print Network [OSTI]

of sustainable development; uConservation of resources and biodiversity; uClimate change and carbon management; uES AND BIODIVERSITy B.1 - conservation genetics and biodiversity 29 PH. BARET, A.-L. JACQUEMART B.2 - Environmental of collective action arrangements and regulation for biodiversity conservation and sustainable use 41 T

Nesterov, Yurii

160

2008 Program Development  

E-Print Network [OSTI]

such issues as endangered species, private property rights, wetlands, timber management, and air and water2008 Program Natural Resources Leadership Development Institute It is the policy of the Purdue University Cooperative Extension Service that all persons have equal opportunity and access to its

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

MECO Production Target Developments  

E-Print Network [OSTI]

be reoptimized Tungsten target Simulations of design parameters with GEANT3 indicate that both production targetMECO Production Target Developments James L. Popp University of California, Irvine NuFact'03 Columbia, June, 2003 #12;June, 2003J.L.Popp, UCI MECO Production Target 2 MECO Collaboration Institute

McDonald, Kirk

162

Opportunities to change development pathways toward lower greenhouse gas emissions through energy efficiency  

E-Print Network [OSTI]

development (economic, local environmental, and social) considerations: synergies and tradeoffs Sector and mitigation options Energylocal environmental, and social sustainable development goals. In the case of energy

Sathaye, Jayant

2010-01-01T23:59:59.000Z

163

Screening for Real Options “In” an Engineering System: A Step Towards Flexible System Development  

E-Print Network [OSTI]

The goal of this research is to develop an analytical framework for screening for real options “in” an

Bartolomei, Jason E.

2006-04-07T23:59:59.000Z

164

Vehicle Systems Integration Laboratory Accelerates Powertrain Development  

ScienceCinema (OSTI)

ORNL's Vehicle Systems Integration (VSI) Laboratory accelerates the pace of powertrain development by performing prototype research and characterization of advanced systems and hardware components. The VSI Lab is capable of accommodating a range of platforms from advanced light-duty vehicles to hybridized Class 8 powertrains with the goals of improving overall system efficiency and reducing emissions.

None

2014-06-25T23:59:59.000Z

165

Vehicle Systems Integration Laboratory Accelerates Powertrain Development  

SciTech Connect (OSTI)

ORNL's Vehicle Systems Integration (VSI) Laboratory accelerates the pace of powertrain development by performing prototype research and characterization of advanced systems and hardware components. The VSI Lab is capable of accommodating a range of platforms from advanced light-duty vehicles to hybridized Class 8 powertrains with the goals of improving overall system efficiency and reducing emissions.

None

2014-04-15T23:59:59.000Z

166

Development of concentrator solar cells  

SciTech Connect (OSTI)

A limited pilot production run on PESC silicon solar cells for use at high concentrations (200 to 400 suns) is summarized. The front contact design of the cells was modified for operation without prismatic covers. The original objective of the contract was to systematically complete a process consolidation phase, in which all the, process improvements developed during the contract would be combined in a pilot production run. This pilot run was going to provide, a basis for estimating cell costs when produced at high throughput. Because of DOE funding limitations, the Photovoltaic Concentrator Initiative is on hold, and Applied Solar`s contract was operated at a low level of effort for most of 1993. The results obtained from the reduced scope pilot run showed the effects of discontinuous process optimization and characterization. However, the run provided valuable insight into the technical areas that can be optimized to achieve the original goals of the contract.

Not Available

1994-08-01T23:59:59.000Z

167

The transfer from nuclear development  

SciTech Connect (OSTI)

The Department of Energy`s task of cleaning up the extensive nuclear weapons complex is of such enormous proportions that there can be no definitive solution that can be adjusted to a predictable cost. The cleanup and disposition of hazardous wastes in many cases will take thirty or more years. In the near term, the economic impact affecting the communities and large number of displaced workers is a significant concern to the Department and the nation. However, before a useful transfer of DOE land, facilities, and sites to the public for economic development can be realized, a consistent and comprehensive process of compliance with regulatory requirements needs to be established. The simultaneous pursuit of these goals creates an unprecedented challenge to the Department of Energy and the US.

Smith, L.

1993-12-31T23:59:59.000Z

168

PEATGAS process development status  

SciTech Connect (OSTI)

Since 1976, IGT has conducted over 200 peat-gasification tests in both laboratory- and process-development-unit (PDU)-scale equipment. The encouraging results demonstrate that on the basis of chemistry and kinetics, peat is an excellent raw material for the production of SNG. Based on a peat-gasification kinetic model developed from the laboratory and PDU data, cost estimates for commercial operation show that the conversion of peat to SNG by the PEATGAS process is competitive with other alternative SNG sources. If the results of a 19-month, $4 million feasibility study funded by the US Department of Energy are favorable, Minnesota Gas Co. plans to participate in the construction and operation of an 80 million SCF/day industrial plant for making SNG from peat.

Punwani, D.V.; Biljetina, R.

1986-01-01T23:59:59.000Z

169

Geothermal materials development activities  

SciTech Connect (OSTI)

This ongoing R&D program is a part of the Core Research Category of the Department of Energy/Geothermal Division initiative to accelerate the utilization of geothermal resources. High risk materials problems that if successfully solved will result in significant reductions in well drilling, fluid transport and energy conversion costs, are emphasized. The project has already developed several advanced materials systems that are being used by the geothermal industry and by Northeastern Electric, Gas and Steam Utilities. Specific topics currently being addressed include lightweight C0{sub 2}-resistant well cements, thermally conductive scale and corrosion resistant liner systems, chemical systems for lost circulation control, elastomer-metal bonding systems, and corrosion mitigation at the Geysers. Efforts to enhance the transfer of the technologies developed in these activities to other sectors of the economy are also underway.

Kukacka, L.E.

1993-06-01T23:59:59.000Z

170

Insider protection technology developments  

SciTech Connect (OSTI)

Sandia National Laboratories evaluates and develops new techniques and technologies to ensure the integrity of special nuclear material (SNM) against potential insider threats. We have evaluated several types of sensor technologies and subsystems to monitor and/or track materials and personnel. This past year`s effort has been directed at characterizing commercial developments that meet the Department of Energy`s (DOE) needs in some of these areas. Some of these evaluations are complete and some are still in progress. This paper discusses our work with infrared light (IR), radio frequency (RF), and RF proximity technologies. After these technologies are judged to be applicable to DOE`s needs, we incorporate them into the generic, real time, personnel tracking and material monitoring system.

Foesch, J.; Bortniak, P.; Waddoups, I.

1994-08-01T23:59:59.000Z

171

NOx Sensor Development  

SciTech Connect (OSTI)

The objectives of this report are: (1) Develop an inexpensive, rapid-response, high-sensitivity and selective electrochemical sensor for oxides of nitrogen (NO{sub x}) for compression-ignition, direct-injection (CIDI) exhaust gas monitoring; (2) Explore and characterize novel, effective sensing methodologies based on impedance measurements; (3) Explore designs and manufacturing methods that could be compatible with mass fabrication; and (4) Collaborate with industry in order to (ultimately) transfer the technology to a supplier for commercialization.

Woo, L Y; Glass, R S

2009-10-27T23:59:59.000Z

172

Acquisition Career Development Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order implements the Department's Acquisition Career Development program, mandatory for professionals in the GS-1102 and 1105 occupational procurement series, as well as others with significant procurement responsibilities. The Order also ensures that members of the acquisition workforce are aware of and adhere to the mandatory training and certification requirements. Cancels Acquisition Letter 98-06. Canceled by DOE O 361.1 Chg 1.

1999-11-10T23:59:59.000Z

173

RESEARCH & DEVELOPMENT: PROGRAM ABSTRACTS  

E-Print Network [OSTI]

) 586-8061 Fax: (202) 586-9811 E-mail: patrick.davis@ee.doe.gov Fuel Cell Core Technology R&D JoAnn Milliken (202) 586-2480 Fax: (202) 586-9811 E-mail: joann.milliken@ee.doe.gov Fuel Cell System Development Donna Ho (202) 586-8000 Fax: (202) 586-9811 E-mail: donna.ho@ee.doe.gov Mailing Address U.S. Department

174

Update on INSIGHTS Development  

SciTech Connect (OSTI)

INSIGHTS is a transformational separate effects testing capability to perform in situ irradiation studies and characterization of the microscale behavior of nuclear fuel materials under a wide variety of in-pile conditions. Separate effects testing including growth, irradiation, and monitoring of these materials, and encompasses the full science based approach for fuels development from the nanoscale to the mesoscale behavior of the sample material and other defects driven by the modeling and simulation efforts of INL.

Not Listed; Eric Burgett

2011-09-01T23:59:59.000Z

175

ORISE: Standards development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACKRadiological programStandards development For 30 years,

176

Advanced Dewatering Systems Development  

SciTech Connect (OSTI)

A new fine coal dewatering technology has been developed and tested in the present work. The work was funded by the Solid Fuels and Feedstocks Grand Challenge PRDA. The objective of this program was to 'develop innovative technical approaches to ensure a continued supply of environmentally sound solid fuels for existing and future combustion systems with minimal incremental fuel cost.' Specifically, this solicitation is aimed at developing technologies that can (i) improve the efficiency or economics of the recovery of carbon when beneficiating fine coal from both current production and existing coal slurry impoundments and (ii) assist in the greater utilization of coal fines by improving the handling characteristics of fine coal via dewatering and/or reconstitution. The results of the test work conducted during Phase I of the current project demonstrated that the new dewatering technologies can substantially reduce the moisture from fine coal, while the test work conducted during Phase II successfully demonstrated the commercial viability of this technology. It is believed that availability of such efficient and affordable dewatering technology is essential to meeting the DOE's objectives.

R.H. Yoon; G.H. Luttrell

2008-07-31T23:59:59.000Z

177

Bikini Atoll groundwater development  

SciTech Connect (OSTI)

Nuclear weapons testing during the 1950's has left the soil and ground water on Bikini Atoll contaminated with cesium-137, and to a lesser extent, strontium-90. Plans currently are underway for the clean-up and resettlement of the atoll by removal of approximately the upper 30 cm of soil. Any large-scale resettlement program must include provisions for water supply. This will be achieved principally by catchment and storage of rain water, however, since rainfall in Bikini is highly seasonal and droughts occur frequently, ground water development must also be considered. The quantity of potable ground water that can be developed is limited by its salinity and radiological quality. The few ground water samples available from Bikini, which have been collected from only about the top meter of the groundwater body, indicate that small bodies of potable ground water exist on Bikini and Eneu, the two principal living islands, but that cesium and strontium in the Bikioni ground water exceed drinking water standards. In order to make a reasonable estimate of the ground water development potential for the atoll, some 40 test boreholes will be drilled during July/August 1985, and a program of water quality monitoring initiated. This paper will describe preliminary results of the drilling and monitoring work.

Peterson, F.L.

1985-01-01T23:59:59.000Z

178

Sustainable Urban Development Priorities - Development of a Rapid...  

Open Energy Info (EERE)

in Cities with Data Scarcity Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Sustainable Urban Development Priorities - Development of a Rapid Assessment Tool for...

179

High Temperature Capacitor Development  

SciTech Connect (OSTI)

The absence of high-temperature electronics is an obstacle to the development of untapped energy resources (deep oil, gas and geothermal). US natural gas consumption is projected to grow from 22 trillion cubic feet per year (tcf) in 1999 to 34 tcf in 2020. Cumulatively this is 607 tcf of consumption by 2020, while recoverable reserves using current technology are 177 tcf. A significant portion of this shortfall may be met by tapping deep gas reservoirs. Tapping these reservoirs represents a significant technical challenge. At these depths, temperatures and pressures are very high and may require penetrating very hard rock. Logistics of supporting 6.1 km (20,000 ft) drill strings and the drilling processes are complex and expensive. At these depths up to 50% of the total drilling cost may be in the last 10% of the well depth. Thus, as wells go deeper it is increasingly important that drillers are able to monitor conditions down-hole such as temperature, pressure, heading, etc. Commercial off-the-shelf electronics are not specified to meet these operating conditions. This is due to problems associated with all aspects of the electronics including the resistors and capacitors. With respect to capacitors, increasing temperature often significantly changes capacitance because of the strong temperature dependence of the dielectric constant. Higher temperatures also affect the equivalent series resistance (ESR). High-temperature capacitors usually have low capacitance values because of these dielectric effects and because packages are kept small to prevent mechanical breakage caused by thermal stresses. Electrolytic capacitors do not operate at temperatures above 150oC due to dielectric breakdown. The development of high-temperature capacitors to be used in a high-pressure high-temperature (HPHT) drilling environment was investigated. These capacitors were based on a previously developed high-voltage hybridized capacitor developed at Giner, Inc. in conjunction with a unique high-temperature electrolyte developed during the course of the program. During this program the feasibility of operating a high voltage hybridized capacitor at 230oC was demonstrated. Capacitor specifications were established in conjunction with potential capacitor users. A method to allow for capacitor operation at both ambient and elevated temperatures was demonstrated. The program was terminated prior to moving into Phase II due to a lack of cost-sharing funds.

John Kosek

2009-06-30T23:59:59.000Z

180

Bioenergy Feedstock Development Program Status Report  

SciTech Connect (OSTI)

The U.S. Department of Energy's (DOE's) Bioenergy Feedstock Development Program (BFDP) at Oak Ridge National Laboratory (ORNL) is a mission-oriented program of research and analysis whose goal is to develop and demonstrate cropping systems for producing large quantities of low-cost, high-quality biomass feedstocks for use as liquid biofuels, biomass electric power, and/or bioproducts. The program specifically supports the missions and goals of DOE's Office of Fuels Development and DOE's Office of Power Technologies. ORNL has provided technical leadership and field management for the BFDP since DOE began energy crop research in 1978. The major components of the BFDP include energy crop selection and breeding; crop management research; environmental assessment and monitoring; crop production and supply logistics operational research; integrated resource analysis and assessment; and communications and outreach. Research into feedstock supply logistics has recently been added and will become an integral component of the program.

Kszos, L.A.

2001-02-09T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Sustainable Development Research Institute fonds  

E-Print Network [OSTI]

Sustainable Development Research Institute fonds Compiled by Erwin Wodarczak and Melanie Hardbattle Projects series Sous-fonds Description o "Women and Sustainable Development: Canadian Perspectives (UBC Library catalogue) #12;Fonds Description Sustainable Development Research Institute fonds. ­ 1985

Handy, Todd C.

182

Workplace Learning & Development UMass Amherst  

E-Print Network [OSTI]

Workplace Learning & Development (WL&D) promotes employee and organizational growth, developmentWorkplace Learning & Development UMass Amherst 303 Goodell Amherst, MA 01003 Workplace Learning workshops to ALL UMass Amherst staff and faculty members. * Fall 2014 Programs Workplace Learning

Mountziaris, T. J.

183

Minnesota's Transportation Economic Development (TED)  

E-Print Network [OSTI]

Minnesota's Transportation Economic Development (TED) Pilot Program Center for Transportation Studies Transportation Research Conference May 24-25, 2011 #12;Transportation Role in Economic Development · Carefully targeted transportation infrastructure improvements will: ­ Stimulate new economic development

Minnesota, University of

184

Developing a Regional Recovery Framework  

SciTech Connect (OSTI)

Abstract A biological attack would present an unprecedented challenge for local, state, and federal agencies; the military; the private sector; and individuals on many fronts ranging from vaccination and treatment to prioritization of cleanup actions to waste disposal. To prepare the Seattle region to recover from a biological attack, the Seattle Urban Area Security Initiative (UASI) partners collaborated with military and federal agencies to develop a Regional Recovery Framework for a Biological Attack in the Seattle Urban Area. The goal was to reduce the time and resources required to recover and restore wide urban areas, military installations, and other critical infrastructure following a biological incident by providing a coordinated systems approach. Based on discussions in small workshops, tabletop exercises, and interviews with emergency response agency staff, the partners identified concepts of operation for various areas to address critical issues the region will face as recovery progresses. Key to this recovery is the recovery of the economy. Although the Framework is specific to a catastrophic, wide-area biological attack using anthrax, it was designed to be flexible and scalable so it could also serve as the recovery framework for an all-hazards approach. The Framework also served to coalesce policy questions that must be addressed for long-term recovery. These questions cover such areas as safety and health, security, financial management, waste management, legal issues, and economic development.

Lesperance, Ann M.; Olson, Jarrod; Stein, Steven L.; Clark, Rebecca; Kelly, Heather; Sheline, Jim; Tietje, Grant; Williamson, Mark; Woodcock, Jody

2011-09-01T23:59:59.000Z

185

Photonics Research and Development  

SciTech Connect (OSTI)

During the period August 2005 through October 2009, the UNLV Research Foundation (UNLVRF), a non-profit affiliate of the University of Nevada, Las Vegas (UNLV), in collaboration with UNLVâ??s Colleges of Science and Engineering; Boston University (BU); Oak Ridge National Laboratory (ORNL); and Sunlight Direct, LLC, has managed and conducted a diverse and comprehensive research and development program focused on light-emitting diode (LED) technologies that provide significantly improved characteristics for lighting and display applications. This final technical report provides detailed information on the nature of the tasks, the results of the research, and the deliverables. It is estimated that about five percent of the energy used in the nation is for lighting homes, buildings and streets, accounting for some 25 percent of the average homeâ??s electric bill. However, the figure is significantly higher for the commercial sector. About 60 percent of the electricity for businesses is for lighting. Thus replacement of current lighting with solid-state lighting technology has the potential to significantly reduce this nationâ??s energy consumption â?? by some estimates, possibly as high as 20%. The primary objective of this multi-year R&D project has been to develop and advance lighting technologies to improve national energy conversion efficiencies; reduce heat load; and significantly lower the cost of conventional lighting technologies. The UNLVRF and its partners have specifically focused these talents on (1) improving LED technologies; (2) optimizing hybrid solar lighting, a technology which potentially offers the benefits of blending natural with artificial lighting systems, thus improving energy efficiency; and (3) building a comprehensive academic infrastructure within UNLV which concentrates on photonics R&D. Task researchers have reported impressive progress in (1) the development of quantum dot laser emitting diodes (QDLEDs) which will ultimately improve energy efficiency and lower costs for display and lighting applications (UNLV College of Engineering); (2) advancing green LED technology based on the Indium-Gallium-Nitride system (BU), thus improving conversion efficiencies; (3) employing unique state-of-the-art X-ray, electron and optical spectroscopies with microscopic techniques to learn more about the electronic structure of materials and contacts in LED devices (UNLV College of Science); (4) establishing a UNLV Display Lighting Laboratory staffed with a specialized team of academic researchers, students and industrial partners focused on identifying and implementing engineering solutions for lighting display-related problems; and (5) conducting research, development and demonstration for HSL essential to the resolution of technological barriers to commercialization.

Pookpanratana, Sujitra; Shlayan, Neveen; Venkat, Rama; Das, Bisjwajit; Boehm, Bob; Heske, Clemens; Fraser, Donald; Moustakas, Theodore

2010-01-15T23:59:59.000Z

186

Development Tools at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps Develop Next-GenEMSL ResearchTools

187

Economic Development - SRSCRO  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It is the mission ofEconomic Development

188

DOE Leadership & Career Development Programs | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Development DOE Leadership & Career Development Programs DOE Leadership & Career Development Programs Senior Executive Service Candidate Development Program (SESCDP): This...

189

Economic Development Fund (New York)  

Broader source: Energy.gov [DOE]

Empire State Development operates the Economic Development Fund, which offers financial assistance to businesses that create or retain business activity and jobs. The program can provide financing...

190

Product development practices that matter  

E-Print Network [OSTI]

Product Development consists of activities to transforms a market opportunity and technological innovation into successful products. Several waves of improvements in technological innovation and product development have ...

Gupta, Nisheeth

2010-01-01T23:59:59.000Z

191

Nuclear Safety Research and Development...  

Energy Savers [EERE]

Nuclear Safety Research and Development Proposal Review and Prioritization Process and Criteria Nuclear Safety Research and Development Program Office of Nuclear Safety Office of...

192

Cooperative Research and Development Agreements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cooperative Research and Development Agreements (CRADAs) Cooperative Research and Development Agreement (CRADA) is a written agreement between a non-federal partner and Battelle...

193

Cooperative Research & Development Agreements | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CRADA SHARE Cooperative Research and Development Agreement A Cooperative Research and Development Agreement (CRADA) allows non-federal entities (industry, universities,...

194

Kansas Certified Development Companies (Kansas)  

Broader source: Energy.gov [DOE]

Kansas Certified Development Companies (CDC) assist businesses by developing loan packages that meet the financial need of a project. These packages often contain multiple sources of project...

195

MARSAME Develop A Survey Design 4 DEVELOP A SURVEY DESIGN  

E-Print Network [OSTI]

MARSAME Develop A Survey Design 4 DEVELOP A SURVEY DESIGN 4.1 Introduction Once a decision rule has been developed, a disposition survey can be designed for the impacted materials and equipment (M costly and time-consuming development of redundant survey designs. The evaluation of existing SOPs

196

Inter-American Development Bank Sustainable Development Department  

E-Print Network [OSTI]

Inter-American Development Bank Sustainable Development Department Environment Division Forest Correa Pertti Veijalainen Harri Ahveninen Inter-American Development Bank Washington, D.C. Sustainable. At the IDB the work was supervised by Kari Keipi of the Sustainable Development Department (SDS). Bank staff

197

Eltron Research & Development  

SciTech Connect (OSTI)

This topical report covers technical work conducted under contract DE-FC26-05NT42469 between FY06 Q1 through FY14 Q2. The project evolved through several budget periods, budget revisions and continuation applications. This report covers work performed under the “base” program. In 2010 ARRA funding was added to the project. A separate report covering the ARRA portion of the project was submitted to DOE. The original project was focused on research and development for scale-up of hydrogen separation membrane for a FutureGen type power plant. The work included membrane testing and evaluation of metal alloy flat plates vs. tubes and metal membranes vs. cermet membranes. In addition, economic analysis and process modeling was performed. The original project team included CoorsTek, NORAM, and Praxair. In FY10Q2 a continuation application was filed for conducting a scale-up test at Eastman Chemical. In this part of the project a Subscale Engineering Prototype (SEP) membrane skid was designed, fabricated, and operated on a gasified coal slip-stream on Eastman’s site in Kingsport, TN. Following operation, the project was reorganized and a second continuation application with a new statement of work was initiated in FY12Q1. Finally, based on DOE’s decision not to proceed with a Process Development Unit (PDU) field test, a third continuation application and statement of work was initiated in FY13Q1 to close out the project.

Evenson, Carl; Mackay, Richard; Faull, John

2014-03-01T23:59:59.000Z

198

Downhole Fluid Analyzer Development  

SciTech Connect (OSTI)

A novel fiber optic downhole fluid analyzer has been developed for operation in production wells. This device will allow real-time determination of the oil, gas and water fractions of fluids from different zones in a multizone or multilateral completion environment. The device uses near infrared spectroscopy and induced fluorescence measurement to unambiguously determine the oil, water and gas concentrations at all but the highest water cuts. The only downhole components of the system are the fiber optic cable and windows. All of the active components--light sources, sensors, detection electronics and software--will be located at the surface, and will be able to operate multiple downhole probes. Laboratory testing has demonstrated that the sensor can accurately determine oil, water and gas fractions with a less than 5 percent standard error. Once installed in an intelligent completion, this sensor will give the operating company timely information about the fluids arising from various zones or multilaterals in a complex completion pattern, allowing informed decisions to be made on controlling production. The research and development tasks are discussed along with a market analysis.

Bill Turner

2006-11-28T23:59:59.000Z

199

Architecture-Based Development  

E-Print Network [OSTI]

Scenarios 6 2.2.2 Quality-Specific Scenarios 7 2.3 Validation 7 3 Design the Architecture 9 3.1 Architectural Structures and Views 10 3.2 A Development Process 11 3.3 Validation 13 4 Document the Architecture 15 5 Analyze the Architecture 19 5.1 Architectural Reviews 19 5.1.1 Participants 20 5.1.2 Review Techniques 20 5.2 Architecture Tradeoff Analysis Method (ATAM) 21 5.3 The Steps of the ATAM 22 5.3.1 Day 1 Activities 23 5.3.2 Day 2 Activities 25 5.3.3 Day 3 Activities 27 6 Realize the Architecture 29 7 Maintain the Architecture 31 8 Conclusions 33 References 35 ii CMU/SEI-99-TR-007 CMU/SEI-99-TR-007 iii List of Figures Figure 1-1 Steps of the Architecture-Based Development Process 2 Figure 2-1 Eliciting the Architectural Requirements 3 Figure 2-2 A Scenario-Elicitation Matrix 5 Figure 3-1 Architecture Design 9 Figure 4-1 Architecture Documentation 15 Figure 5-1 Architecture Analysis 19 Figure 5-2 The Activities of ATAM and Their Relative Importance Over Time 22 Figure 5-3 Dep...

Len Bass; Rick Kazman; Rick Kazman; Product Line Systems; Mario Moya

1999-01-01T23:59:59.000Z

200

ADVANCED HOT GAS FILTER DEVELOPMENT  

SciTech Connect (OSTI)

DuPont Lanxide Composites, Inc. undertook a sixty-month program, under DOE Contract DEAC21-94MC31214, in order to develop hot gas candle filters from a patented material technology know as PRD-66. The goal of this program was to extend the development of this material as a filter element and fully assess the capability of this technology to meet the needs of Pressurized Fluidized Bed Combustion (PFBC) and Integrated Gasification Combined Cycle (IGCC) power generation systems at commercial scale. The principal objective of Task 3 was to build on the initial PRD-66 filter development, optimize its structure, and evaluate basic material properties relevant to the hot gas filter application. Initially, this consisted of an evaluation of an advanced filament-wound core structure that had been designed to produce an effective bulk filter underneath the barrier filter formed by the outer membrane. The basic material properties to be evaluated (as established by the DOE/METC materials working group) would include mechanical, thermal, and fracture toughness parameters for both new and used material, for the purpose of building a material database consistent with what is being done for the alternative candle filter systems. Task 3 was later expanded to include analysis of PRD-66 candle filters, which had been exposed to actual PFBC conditions, development of an improved membrane, and installation of equipment necessary for the processing of a modified composition. Task 4 would address essential technical issues involving the scale-up of PRD-66 candle filter manufacturing from prototype production to commercial scale manufacturing. The focus would be on capacity (as it affects the ability to deliver commercial order quantities), process specification (as it affects yields, quality, and costs), and manufacturing systems (e.g. QA/QC, materials handling, parts flow, and cost data acquisition). Any filters fabricated during this task would be used for product qualification tests being conducted by Westinghouse at Foster-Wheeler's Pressurized Circulating Fluidized Bed (PCFBC) test facility in Karhula, Finland. Task 5 was designed to demonstrate the improvements implemented in Task 4 by fabricating fifty 1.5-meter hot gas filters. These filters were to be made available for DOE-sponsored field trials at the Power Systems Development Facility (PSDF), operated by Southern Company Services in Wilsonville, Alabama.

E.S. Connolly; G.D. Forsythe

2000-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

RSMASS system model development  

SciTech Connect (OSTI)

RSMASS system mass models have been used for more than a decade to make rapid estimates of space reactor power system masses. This paper reviews the evolution of the RSMASS models and summarizes present capabilities. RSMASS has evolved from a simple model used to make rough estimates of space reactor and shield masses to a versatile space reactor power system model. RSMASS uses unique reactor and shield models that permit rapid mass optimization calculations for a variety of space reactor power and propulsion systems. The RSMASS-D upgrade of the original model includes algorithms for the balance of the power system, a number of reactor and shield modeling improvements, and an automatic mass optimization scheme. The RSMASS-D suite of codes cover a very broad range of reactor and power conversion system options as well as propulsion and bimodal reactor systems. Reactor choices include in-core and ex-core thermionic reactors, liquid metal cooled reactors, particle bed reactors, and prismatic configuration reactors. Power conversion options include thermoelectric, thermionic, Stirling, Brayton, and Rankine approaches. Program output includes all major component masses and dimensions, efficiencies, and a description of the design parameters for a mass optimized system. In the past, RSMASS has been used as an aid to identify and select promising concepts for space power applications. The RSMASS modeling approach has been demonstrated to be a valuable tool for guiding optimization of the power system design; consequently, the model is useful during system design and development as well as during the selection process. An improved in-core thermionic reactor system model RSMASS-T is now under development. The current development of the RSMASS-T code represents the next evolutionary stage of the RSMASS models. RSMASS-T includes many modeling improvements and is planned to be more user-friendly. RSMASS-T will be released as a fully documented, certified code at the end of 1998. A radioisotope space power system model RISMASS is also under development. RISMASS will optimize and predict system masses for radioisotope power sources coupled with close-spaced thermionic diodes. Although RSMASS-D models have been developed for a broad variety of space nuclear power and propulsion systems, only a few concepts will be included in the releasable RSMASS-T computer code. A follow-on effort is recommended to incorporate all previous models as well as solar power system models into one general code. The proposed Space Power and propulsion system MASS (SPMASS) code would provide a consistent analysis tool for comparing a very broad range of alternative power and propulsion systems for any required power level and operating conditions. As for RSMASS-T the SPMASS model should be a certified, fully documented computer code available for general use. The proposed computer program would provide space mission planners with the capability to quickly and cost effectively explore power system options for any space mission. The code should be applicable for power requirements from as low as a few milliwatts (solar and isotopic system options) to many megawatts for reactor power and propulsion systems.

Marshall, A.C.; Gallup, D.R.

1998-07-01T23:59:59.000Z

202

Goals and strategies for a sustainable future!  

E-Print Network [OSTI]

Goals and strategies for a sustainable future! Department of Forest Resource Management SRH:s goals Goals and strategies for a sustainable future! #12;Our vision:We lead in the advancement of knowledge and in the development of effective processes for the sustainable development of natural resources, are the sector

203

The Manufacturing Enterprise and Sustainable Development -A Working Paper  

E-Print Network [OSTI]

1 The Manufacturing Enterprise and Sustainable Development - A Working Paper T.G. Gutowski Lab with industry...) and brought to the fore the concept of sustainable development. The report defined sustainable [WCED 1987]. Since then, the concept of Sustainable Development has become a common goal for many

Gutowski, Timothy

204

Studying Code Development for High Performance Computing: The HPCS Program  

E-Print Network [OSTI]

Studying Code Development for High Performance Computing: The HPCS Program Jeff Carver1 , Sima at measuring the development time for programs written for high performance computers (HPC). Our goal. Introduction The development of High-Performance Computing (HPC) programs (codes) is crucial to progress

Basili, Victor R.

205

Developing Human Performance Measures  

SciTech Connect (OSTI)

Through the reactor oversight process (ROP), the U.S. Nuclear Regulatory Commission (NRC) monitors the performance of utilities licensed to operate nuclear power plants. The process is designed to assure public health and safety by providing reasonable assurance that licensees are meeting the cornerstones of safety and designated crosscutting elements. The reactor inspection program, together with performance indicators (PIs), and enforcement activities form the basis for the NRC’s risk-informed, performance based regulatory framework. While human performance is a key component in the safe operation of nuclear power plants and is a designated cross-cutting element of the ROP, there is currently no direct inspection or performance indicator for assessing human performance. Rather, when human performance is identified as a substantive cross cutting element in any 1 of 3 categories (resources, organizational or personnel), it is then evaluated for common themes to determine if follow-up actions are warranted. However, variability in human performance occurs from day to day, across activities that vary in complexity, and workgroups, contributing to the uncertainty in the outcomes of performance. While some variability in human performance may be random, much of the variability may be attributed to factors that are not currently assessed. There is a need to identify and assess aspects of human performance that relate to plant safety and to develop measures that can be used to successfully assure licensee performance and indicate when additional investigation may be required. This paper presents research that establishes a technical basis for developing human performance measures. In particular, we discuss: 1) how historical data already gives some indication of connection between human performance and overall plant performance, 2) how industry led efforts to measure and model human performance and organizational factors could serve as a data source and basis for a framework, 3) how our use of modeling and simulation techniques could be used to develop and validate measures of human performance, and 4) what the possible outcomes are from this research as the modeling and simulation efforts generate results.

Jeffrey Joe; Bruce Hallbert; Larry Blackwood; Donald Dudehoeffer; Kent Hansen

2006-05-01T23:59:59.000Z

206

Development of turbodrill tachometer  

SciTech Connect (OSTI)

A reliable tachometer has been developed for use with turbodrills. The tachometer utilizes a set of partially blanked turbine blades to produce a pressure pulse in the drilling mud flow stream each time the turbodrill rotates one revolution. The pressure pulses are transmitted through the mud in the drill pipes to the surface where they are detected, processed and RPM read out. The frequency of the pulse signals is a direct measure of the turbodrill rotary speed. Drilling motor test stand trials demonstrated the reliabiity and accuracy of the tachometer. The pulsing blades were then installed on geothermal turbodrills used in drilling the Los Alamos Scientific Laboratory geothermal well EE-2. The tachometer allowed continual monitoring and control of turbodrill speed at LASL and was successfully used to depths in excess of 10,000 feet. The success of the high temperature turbodrills in EE-2 is attributed in part to the tachometer.

McDonald, W.J.; Maurer, W.C.; Neudecker, J.W.; Shoemaker, H.D.

1980-09-01T23:59:59.000Z

207

Macroencapsulation development at Pantex  

SciTech Connect (OSTI)

The Pantex Plant is developing an innovative skid-mounted macroencapsulation technology (called a mobile treatment unit, MTU) that will economically dispose low-level radioactive mixed waste debris. Pantex`s macroencapuslation technology spin-welds a polyethylene top onto a polyethylene receiver to form a jacket that encapsulates a fifty-five (55) gallon steel drum of compacted low-level radioactive and mixed waste debris. The annulus formed by the fifty-five gallon drum and the polyethylene jacket is filled with a material (either foam or grout) to eliminate voids in the final waste form. The US EPA verified that the use of a polyethylene jacket constitutes macroencapsulation in a letter to Chemical Waste Management, Inc., dated September 19, 1995. The EPA letter stipulated that this treatment technology should not be used for D008, radioactive lead solids, and that the final waste form should be structurally sound and resistant to degradation.

Yokum, J.S. [Battelle Pantex, Amarillo, TX (United States)

1995-12-31T23:59:59.000Z

208

Geothermal development in Australia  

SciTech Connect (OSTI)

In Australia, natural hot springs and hot artesian bores have been developed for recreational and therapeutic purposes. A district heating system at Portland, in the Otway Basin of western Victoria, has provided uninterrupted service for 12 Sears without significant problems, is servicing a building area of 18 990 m{sup 2}, and has prospects of expansion to manufacturing uses. A geothermal well has provided hot water for paper manufacture at Traralgon, in the Gippsland Basin of eastern Victoria. Power production from hot water aquifers was tested at Mulka in South Australia, and is undergoing a four-year production trial at Birdsville in Queensland. An important Hot Dry Rock resource has been confirmed in the Cooper Basin. It has been proposed to build an HDR experimental facility to test power production from deep conductive resources in the Sydney Basin near Muswellbrook.

Burns, K.L. [Los Alamos National Lab., NM (United States); Creelman, R.A. [Creelman (R.A.) and Associates, Sydney, NSW (Australia); Buckingham, N.W. [Glenelg Shire Council, Portland, VIC (Australia); Harrington, H.J. [Australian National Univ., Canberra, ACT (Australia)]|[Sydney Univ., NSW (Australia)

1995-03-01T23:59:59.000Z

209

The economic development of Libya  

SciTech Connect (OSTI)

This book focuses on the development of the Libyan economy over the last decade. The book surveys both the structural developments in the Libyan economy and the experience of the individual sectors. It considers the potential for industrial development and the prospects for agriculture both in terms of natural resources and political commitments. The book also examines developments in the service sector especially banking.

Khader, B.; El-Wifati, B.

1986-01-01T23:59:59.000Z

210

FORESTRY, GOVERNANCE AND NATIONAL DEVELOPMENT  

E-Print Network [OSTI]

Development Partners Group / Ministry of Natural Resources of Tourism, Dar es Salaam, Tanzania. 252pp. Key

211

Networked Systems for Developing Regions  

E-Print Network [OSTI]

at the Bottom of the Pyramid !! Amartya Sen: Development as Freedom !! Paul Collier: The Bottom Billion

Subramanian, Lakshminarayanan

212

1998 wire development workshop proceedings  

SciTech Connect (OSTI)

This report consists of vugraphs of the presentations at the conference. The conference was divided into the following sessions: (1) First Generation Wire Development: Status and Issues; (2) First Generation Wire in Pre-Commercial Prototypes; (3) Second Generation Wire Development: Private Sector Progress and Issues; (4) Second Generation Wire Development: Federal Laboratories; and (5) Fundamental Research Issues for HTS Wire Development.

NONE

1998-04-01T23:59:59.000Z

213

Breakthrough Vehicle Development - Fuel Cells  

Fuel Cell Technologies Publication and Product Library (EERE)

Document describing research and development program for fuel cell power systems for transportation applications.

214

Supervisory Control Strategy Development  

SciTech Connect (OSTI)

Task 4 of this collaborative effort between ORNL, Brazil, and Westinghouse for the International Nuclear Energy Research Initiative entitled “Development of Advanced Instrumentation and Control for an Integrated Primary System Reactor” focused on the design of the hierarchical supervisory control for multiple-module units. The state of the IRIS plant design – specifically, the lack of a detailed secondary system design – made developing a detailed hierarchical control difficult at this time. However, other simultaneous and ongoing efforts have contributed to providing the needed information. This report summarizes the results achieved under Task 4 of this Financial Assistance Award. Section 1.2 describes the scope of this effort. Section 2 discusses the IRIS control functions. Next, it briefly reviews the current control concepts, and then reviews the maneuvering requirements for the IRIS plant. It closes by noting the benefits that automated sequences have in reducing operator workload. Section 3 examines reactor loading in the frequency domain to establish some guidelines for module operation, paying particular attention to strategies for using process steam for desalination and/or district heating. The final subsection discusses the implications for reactor control, and argues that using the envisioned percentage (up to 10%) of the NSSS thermal output for these purposes should not significantly affect the NSSS control strategies. Section 4 uses some very general economic assumptions to suggest how one should approach multi-module operation. It concludes that the well-known algorithms used for economic dispatching could be used to help manage a multi-unit IRIS site. Section 5 addresses the human performance factors of multi-module operation. Section 6 summarizes our conclusions.

Gary D. Storrick; Bojan Petrovic

2007-02-28T23:59:59.000Z

215

Power Systems Development Facility  

SciTech Connect (OSTI)

This report discusses Test Campaign TC12 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Westinghouse Power Corporation (SW) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using a particulate control device (PCD). While operating as a gasifier, either air or oxygen can be used as the oxidant. Test run TC12 began on May 16, 2003, with the startup of the main air compressor and the lighting of the gasifier start-up burner. The Transport Gasifier operated until May 24, 2003, when a scheduled outage occurred to allow maintenance crews to install the fuel cell test unit and modify the gas clean-up system. On June 18, 2003, the test run resumed when operations relit the start-up burner, and testing continued until the scheduled end of the run on July 14, 2003. TC12 had a total of 733 hours using Powder River Basin (PRB) subbituminous coal. Over the course of the entire test run, gasifier temperatures varied between 1,675 and 1,850 F at pressures from 130 to 210 psig.

None

2003-07-01T23:59:59.000Z

216

Power Systems Development Facility  

SciTech Connect (OSTI)

This report discusses Test Campaign TC15 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Power Generation, Inc. (SPG) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or gasifier using a particulate control device (PCD). While operating as a gasifier, either air or oxygen can be used as the oxidant. Test run TC15 began on April 19, 2004, with the startup of the main air compressor and the lighting of the gasifier startup burner. The Transport Gasifier was shutdown on April 29, 2004, accumulating 200 hours of operation using Powder River Basin (PRB) subbituminous coal. About 91 hours of the test run occurred during oxygen-blown operations. Another 6 hours of the test run was in enriched-air mode. The remainder of the test run, approximately 103 hours, took place during air-blown operations. The highest operating temperature in the gasifier mixing zone mostly varied from 1,800 to 1,850 F. The gasifier exit pressure ran between 200 and 230 psig during air-blown operations and between 110 and 150 psig in oxygen-enhanced air operations.

Southern Company Services

2004-04-30T23:59:59.000Z

217

Global Nuclear Energy Partnership Technology Development Plan  

SciTech Connect (OSTI)

This plan describes the GNEP Technology Demonstration Program (GNEP-TDP). It has been prepared to guide the development of integrated plans and budgets for realizing the domestic portion of the GNEP vision as well as providing the basis for developing international cooperation. Beginning with the GNEP overall goals, it describes the basic technical objectives for each element of the program, summarizes the technology status and identifies the areas of greatest technical risk. On this basis a proposed technology demonstration program is described that can deliver the required information for a Secretarial decision in the summer of 2008 and support construction of facilities.

David J. Hill

2007-07-01T23:59:59.000Z

218

Spheromak Physics Development  

SciTech Connect (OSTI)

The spheromak is a Magnetic Fusion Energy (MFE) configuration, which is a leading alternative to the tokamak. It has a simple geometry which offers an opportunity to achieve the promise of fusion energy if the physics of confinement, current drive, and pressure holding capability extrapolate favorably to a reactor. Recent changes in the US MFE program, taken in response to budget constraints and programmatic directions from Congress, include a revitalization of an experimental alternative concept effort. Detailed studies of the spheromak were consequently undertaken to examine the major physics issues which need to be resolved to advance it as a fusion plasma, the optimum configuration for an advanced experiment, and its potential as a reactor. As a result of this study, we conclude that it is important to evaluate several physics issues experimentally. Such an experiment might be appropriately be named the Sustained Spheromak Physics Experiment (SSPX). It would address several critical issues, the solution to which will provide the physics basis to enable an advanced experiment. The specific scientific goals of SSPX would be to: * Demonstrate that electron and ion temperatures of a few hundred electron volts can be achieved in a steady-state spheromak plasma sustained by a magnetic dynamo (``helicity injection``). * Relate energy confinement quantitatively to the magnetic turbulence accompanying the dynamo and use this knowledge to optimize performance. * Measure the magnetic field profiles and magnetic turbulence in the plasma and relate these to the science of the magnetic dynamo which drives the current in the plasma. * Examine experimentally the pressure holding capability (``beta limit``) of the spheromak. * Understand the initial phases of the transition of the plasma from an equilibrium supported by a magnetic-flux conserving wall to one supported by external coils. These goals could be achieved in an experiment with duration of a few milliseconds, and can consequently be addressed at a relatively low cost. There are additional goals which would be addressed in a larger, follow-up experiment, the Advanced Spheromak Physics Experiment. These include the achievement of temperatures in the multi-kev range, the control of low mode-number instabilities (perhaps with a feedback system), and the technology of long-pulse current drive. This document reviews past work in the field and describes a number of new results. Recent publications which complement this report are also referenced. These publications also describe the characteristics of an experiment to examine the important spheromak physics issues.

Hooper, E.B.

1997-01-27T23:59:59.000Z

219

Developing product platforms:analysis of the development process  

E-Print Network [OSTI]

Several authors have highlighted the importance of companies enhancing their new product development process through a multiproduct

Roveda, Marco

1999-12-08T23:59:59.000Z

220

Solar Power Generation Development  

SciTech Connect (OSTI)

This project centered on creating a solar cell prototype enabling significant reductions in module cost and increases in module efficiency. Low cost was addressed by using plentiful organic materials that only comprise 16% of the total module cost, and by leveraging building integrated PV concepts that reduce the cost of key module components to zero. High efficiency was addressed by implementing multiband organic PV, low cost spectral splitting, and possibly integrating photovoltaic and photothermal mechanisms. This research has contributed to the design of multiband organic PV, and the sealing of organic PV cells. If one assumes that the aggregate multiband efficiency can reach 12%, projected cost would be $0.97/W. If the sealing technology enables 10 to 20 year lifetimes, the LCOE will match that of domestic coal. The final report describes progress towards these goals.

Robert L. Johnson Jr.; Gary E. Carver

2011-10-28T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Peace Corps / Youth & Community Development Youth and Community Development Volunteers  

E-Print Network [OSTI]

Peace Corps / Youth & Community Development Youth and Community Development Volunteers Through engage in a wide variety of locally sustainable projects. Volunteers act as catalysts for change Development Sample Projects · Help young people form youth groups, clubs, sports teams, or extracurricular

Kaminsky, Werner

222

Automotive Component Product Development Enhancement  

E-Print Network [OSTI]

Automotive Component Product Development Enhancement Through Multi-Attribute System Design Engineering Systems Division #12;Automotive Component Product Development Enhancement Through Multi of Science in Engineering and Management February 2005 ABSTRACT Automotive industry is facing a tough period

223

Tools for dynamic model development  

E-Print Network [OSTI]

For this thesis, several tools for dynamic model development were developed and analyzed. Dynamic models can be used to simulate and optimize the behavior of a great number of natural and engineered systems, from the ...

Schaber, Spencer Daniel

2014-01-01T23:59:59.000Z

224

Refund for Economic Development (Texas)  

Broader source: Energy.gov [DOE]

The Refund for Economic Development under the Tax Code for state tax refunds for economic development. Some Texas property owners may be eligible to receive refunds of state sales and use taxes and...

225

Herty Advanced Materials Development Center  

Broader source: Energy.gov [DOE]

Session 1-B: Advancing Alternative Fuels for the Military and Aviation Sector Breakout Session 1: New Developments and Hot Topics Jill Stuckey, Acting Director, Herty Advanced Materials Development Center

226

Mechanisms of brain ventricle development  

E-Print Network [OSTI]

The brain ventricles are a conserved system of fluid-filled cavities within the brain that form during the earliest stages of brain development. Abnormal brain ventricle development has been correlated with neurodevelopmental ...

Lowery, Laura Anne

2008-01-01T23:59:59.000Z

227

Design of product development systems  

E-Print Network [OSTI]

The development of successful new products in less time and using fewer resources is key to the financial success of most consumer product companies. In this thesis we have studied the development of new products and how ...

Aguirre Granados, Adrian

2008-01-01T23:59:59.000Z

228

Women Empowerment and Economic Development  

E-Print Network [OSTI]

Women empowerment and economic development are closely related: in one direction, development alone can play a major role in driving down inequality between men and women; in the other direction, empowering women may benefit ...

Duflo, Esther

229

Climate Change, Adaptation, and Development  

E-Print Network [OSTI]

Climate Change, Adaptation, and Development Daniel H. Cole*THE COSTS OF CLIMATE CHANGE . ADAPTATIONCONVENTION ON CLIMATE CHANGE . IV. A.

Cole, Daniel H.

2008-01-01T23:59:59.000Z

230

Corruption, Institutions and Economic Development  

E-Print Network [OSTI]

and in developing the underlying theory (Dasgupta, 2001, chapter 9; Hamilton and Clemens, 1999). Loosely speaking, sustainable development is related to an economy?s ability to maintain living standards through time. More precisely, Arrow et al. (2004) suggest... capita ?a direct measure of sustainable development ?and corruption. While corruption may have little average e¤ect on the growth rate of GDP per capita, it is a likely source of unsustainable development. Key words: Corruption, Growth, Sustainable...

Aidt, Toke S

231

Modelling sustainable development Ivar Ekeland  

E-Print Network [OSTI]

Modelling sustainable development Ivar Ekeland www.ceremade.dauphine.fr/~ekeland CERMADE.ceremade.dauphine.fr/~ekeland (CERMADE, Universite Paris-Dauphine)Modelling sustainable development Collloque Sorin, IHP, Juin 2012 1 / 17 #12;Sustainable development The de...nition given by the Brundtland commision to the UN (1987

Ekeland, Ivar

232

Asian Perspectives on Sustainable Development  

E-Print Network [OSTI]

Asian Perspectives on Sustainable Development Thursday, March 28, 2013 9:00 ­ 10:30 a.m. Wrigley society can help spur a more sustainable growth. Pamela Mar's work focuses on Asian development, corporate and social development. Asia needs to rethink how it grows to ensure that social progress and environmental

Hall, Sharon J.

233

Systemic Signalling in Plant Development  

E-Print Network [OSTI]

develop continuously throughout their life cycle, constantly initiating new or- gans. They doSystemic Signalling in Plant Development David Jackson, Cold Spring Harbor Laboratory, Cold Spring to the production of systemic signals that control the development of distant organs and tissues. Introduction

Jackson, David

234

DASHboards: Enhancing Developer Situational Awareness  

E-Print Network [OSTI]

DASHboards: Enhancing Developer Situational Awareness Oleksii Kononenko, Olga Baysal, Reid Holmes of software development "issues", such as bug fixes and discussions about features. Typically, developers://youtu.be/Jka_MsZet20 Categories and Subject Descriptors D.2.3 [Software Engineering]: Coding Tools and Tech- niques; D

Godfrey, Michael W.

235

USDA Rural Community Development Initiative  

Broader source: Energy.gov [DOE]

The U.S. Department of Agriculture (USDA) Rural Housing Service is seeking applications for Rural Community Development Initiative (RCDI) grants that will be awarded to organizations to provide criticial financial and technical assistance to recipients to develop and strengthen their capacity to carry out housing, community facilities, and community and economic development projects.

236

INTERNATIONAL JOURNAL OF DEVELOPMENT ISSUES  

E-Print Network [OSTI]

Challenges of sustainable development under globalization 1 Sari Jusi and Maarit Virtanen Irrigation-20 Challenges of sustainable development under globalisation Jeffrey D. Sachs Director, Earth Institute. The Earth Institute is organised around the theme of sustainable development. I want to talk about

237

Misadventures in Conservation and Development  

E-Print Network [OSTI]

Governance issues are at the heart of successful biodiversity conservation and sustainable development between biodiversity conservation and human development. She has studied Integrated ConservationMisadventures in Conservation and Development Friday, September 28, 2012 12:00 - 1:30 p.m. (lunch

Hall, Sharon J.

238

POWER SYSTEMS DEVELOPMENT FACILITY  

SciTech Connect (OSTI)

This report discusses test campaign GCT3 of the Halliburton KBR transport reactor train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The transport reactor is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using one of two possible particulate control devices (PCDs). The transport reactor was operated as a pressurized gasifier during GCT3. GCT3 was planned as a 250-hour test run to commission the loop seal and continue the characterization of the limits of operational parameter variations using a blend of several Powder River Basin coals and Bucyrus limestone from Ohio. The primary test objectives were: (1) Loop Seal Commissioning--Evaluate the operational stability of the loop seal with sand and limestone as a bed material at different solids circulation rates and establish a maximum solids circulation rate through the loop seal with the inert bed. (2) Loop Seal Operations--Evaluate the loop seal operational stability during coal feed operations and establish maximum solids circulation rate. Secondary objectives included the continuation of reactor characterization, including: (1) Operational Stability--Characterize the reactor loop and PCD operations with short-term tests by varying coal feed, air/coal ratio, riser velocity, solids circulation rate, system pressure, and air distribution. (2) Reactor Operations--Study the devolatilization and tar cracking effects from transient conditions during transition from start-up burner to coal. Evaluate the effect of process operations on heat release, heat transfer, and accelerated fuel particle heat-up rates. Study the effect of changes in reactor conditions on transient temperature profiles, pressure balance, and product gas composition. (3) Effects of Reactor Conditions on Syngas Composition--Evaluate the effect of air distribution, steam/coal ratio, solids circulation rate, and reactor temperature on CO/CO{sub 2} ratio, H{sub 2}/converted carbon ratio, gasification rates, carbon conversion, and cold and hot gas efficiencies. Test run GCT3 was started on December 1, 2000, with the startup of the thermal oxidizer fan, and was completed on February 1, 2001. This test was conducted in two parts; the loop seal was commissioned during the first part of this test run from December 1 through 15, which consisted of hot inert solids circulation testing. These initial tests provided preliminary data necessary to understand different parameters associated with the operation and performance of the loop seal. The loop seal was tested with coal feed during the second part of the test run and additional data was gathered to analyze reactor operations and to identify necessary modifications to improve equipment and process performance. In the second part of GCT3, the gasification portion of the test, from January 20 to February 1, 2001, the mixing zone and riser temperatures were varied between 1,675 and 1,825 F at pressures ranging from 200 to 240 psig. There were 306 hours of solid circulation and 184 hours of coal feed attained in GCT3.

Unknown

2002-05-01T23:59:59.000Z

239

Geothermal Drilling and Completion Technology Development Program Annual Progress Report  

SciTech Connect (OSTI)

The high cost of drilling and completing geothermal wells is an impediment to the timely development of geothermal resources in the US. The Division of Geothermal Energy (DGE) of the Department of Energy (DOE) has initiated a development program aimed at reducing well costs through improvements in the technology used to drill and complete geothermal wells. Sandia National Laboratories (SNL) has been selected to manage this program for DOE/DGE. Based on analyses of existing well costs, cost reduction goals have been set for the program. These are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987. To meet these goals, technology development in a wide range of areas is required. The near-term goal will be approached by improvements in conventional, rotary drilling technology. The long-term goal will require the development of an advanced drilling and completion system. Currently, the program is emphasizing activities directed at the near-term cost reduction goal, but increased emphasis on advanced system development is anticipated as time progresses. The program is structured into six sub-elements: Drilling Hardware, Drilling Fluids, Completion Technology, Lost Circulation Control Methods, Advanced Drilling Systems, and Supporting Technology. Technology development in each of these areas is conducted primarily through contracts with private industries and universities. Some projects are conducted internally by Sandia. This report describes the program, status, and results of ongoing R and D within the program for the 1980 fiscal year.

Varnado, S. G.

1981-03-01T23:59:59.000Z

240

Hanford 200 Areas Development Plan  

SciTech Connect (OSTI)

The purpose of the Hanford 200 Areas Development Plan (Development Plan) is to guide the physical development of the 200 Areas (which refers to the 200 East Area, 200 West Area, and 200 Area Corridor, located between the 200 East and 200 West Areas) in accordance with US Department of Energy (DOE) Order 4320.lB (DOE 1991a) by performing the following: Establishing a land-use plan and setting land-use categories that meet the needs of existing and proposed activities. Coordinating existing, 5-year, and long-range development plans and guiding growth in accordance with those plans. Establishing development guidelines to encourage cost-effective development and minimize conflicts between adjacent activities. Identifying site development issues that need further analysis. Integrating program plans with development plans to ensure a logical progression of development. Coordinate DOE plans with other agencies [(i.e., Washington State Department of Ecology (Ecology) and US Environmental Protection Agency (EPA)]. Being a support document to the Hanford Site Development Plan (DOE-RL 1990a) (parent document) and providing technical site information relative to the 200 Areas.

Rinne, C.A.; Daly, K.S.

1993-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Assessing Development Impacts Associated with Low Emission Development Strategies: Lessons Learned from Pilot Efforts in Kenya and Montenegro  

SciTech Connect (OSTI)

Low emission development strategies (LEDS) articulate economy-wide policies and implementation plans designed to enable a country to meet its long-term development objectives while reducing greenhouse gas emissions. A development impact assessment tool was developed to inform an analytically robust and transparent prioritization of LEDS actions based on their economic, social, and environmental impacts. The graphical tool helps policymakers communicate the development impacts of LEDS options and identify actions that help meet both emissions reduction and development goals. This paper summarizes the adaptation and piloting of the tool in Kenya and Montenegro. The paper highlights strengths of the tool and discusses key needs for improving it.

Cox, S.; Katz, J.; Wurtenberger, L.

2014-01-01T23:59:59.000Z

242

Facilitating the development and integration of low-carbon energy  

E-Print Network [OSTI]

(Papers 1­3) and development of new energy technologies (Paper 4) in service of this goal. Compressed air energy storage (CAES) could be paired with a wind farm to provide firm, dispatchable baseload powerFacilitating the development and integration of low-carbon energy technologies Submitted in partial

243

Surface Water Development in Texas.  

E-Print Network [OSTI]

Government. Flood-control storage capacities at 26 major Texas reservoirs amounted to 17.4 million acre-feet in 1976. There is evi- dence of a changing national policy to keep economic development out of the flood plains. It appears that management... Water Development ................................. 30 Appendix Tables .......................................... 32 ......... Appendix A: Major Conservation Storage Reservoirs 40 endix B: Water Development Board Policy ............... 41 eferences...

McNeely, John G.; Lacewell, Ronald D.

1977-01-01T23:59:59.000Z

244

WE -ADKWindows Embedded Automotive Development Kit Benefits to the developer  

E-Print Network [OSTI]

WE -ADKWindows Embedded Automotive Development Kit Benefits to the developer: The Official-ADK, Microsoft Auto 4.1 installs on top of Windows® Embedded CE 6.0 R3 and adds automotive -specific an Automotive Infotainment Solution with Microsoft Auto 4.1 and Qualnetics WE

Narasayya, Vivek

245

Development and Extension Work The need for developing metrics  

E-Print Network [OSTI]

-Horizontal transfer informed by and delivers to society at large Wastewater treatment plants-Prof. H. S. Shankar to the development of our predominantly rural economy, an ambivalent attitude seems to persist in the IITs engineers, innovative thinkers and engineer entrepreneurs; - To develop a special nexus with rural

Sohoni, Milind

246

Development and Health The impact of health on development in  

E-Print Network [OSTI]

· breakdown of health care delivery systems · inadequate application of TB control measures · increasing drug's population are at risk - increasing due to: · breakdown of health care delivery systems · growing drugDevelopment and Health The impact of health on development in Africa #12;Health challenges

Glasgow, University of

247

Developing country FDI and development: the case of the Chinese  

E-Print Network [OSTI]

's early investment in the Sudan by the Chinese National Oil Corporation (CNPC) and the consequent cascade * This paper examines the development implications of Chinese investment in the Sudan to enable a better understanding of the impact of foreign direct investment (FDI) from developing countries. By examining China

Sheldon, Nathan D.

248

Economic Development Incentive Program (Massachusetts)  

Broader source: Energy.gov [DOE]

The Economic Development Incentive Program (EDIP) is a tax incentive program designed to foster job creation and stimulate business growth throughout the Commonwealth. Participating companies may...

249

Clean Energy Development Fund (CEDF)  

Broader source: Energy.gov [DOE]

NOTE: The Vermont Clean Energy Development Fund has issued its [http://publicservicedept.vermont.gov/sites/psd/files/Topics/Renewable_En... Five Year Strategic Plan]. See the [http:/...

250

Industrial Development Fund (North Carolina)  

Broader source: Energy.gov [DOE]

The Industrial Development Fund provides financing grants and loans through designated municipalities and counties to assist in infrastructure improvements for targeted industrial projects. The...

251

Wind Development on the Rosebud  

Broader source: Energy.gov [DOE]

Presentation covers the Wind Development on the Rosebud, given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Rapid City, South Dakota.

252

Large Business Development Program (Illinois)  

Broader source: Energy.gov [DOE]

The Large Business Development Program, administered by the Illinois Department of Commerce and Economic Opportunity, provides grants to large businesses for bondable business activities, including...

253

Technology-Based Economic Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology-Based Economic Development Idaho National Laboratory (INL), on behalf of corporate funds provided by Battelle Energy Alliance, funds philanthropic projects aimed at...

254

Economic Development Project Districts (Indiana)  

Broader source: Energy.gov [DOE]

Redevelopment commissions may petition legislative bodies to designate economic development project districts in cities with populations between 80,500 and 500,000. Such districts may be...

255

Advanced LWR Nuclear Fuel Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- Radiation (Part I) - Alkali-AggregateSilica Reaction (Part II) - Creepcreep-fracture interaction (Roadmap to be developed) Part I- Irradiated Concrete Research results...

256

Geothermal Research and Development Programs  

Broader source: Energy.gov [DOE]

Here you'll find links to laboratories, universities, and colleges conducting research and development (R&D) in geothermal energy technologies.

257

Career Development | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

knowledge and experience from entry-level employees to senior executives. The Office of Learning and Workforce Development can help you find the program that serves your needs....

258

Recent Developments in Superstring Phenomenology  

E-Print Network [OSTI]

Recent developments in superstring phenomenology are summarized on a non-technical level. (Talk presented at the XXVIIth Rencontre de Moriond on Electroweak Interactions and Unified Theories.)

Jan Louis

1992-05-20T23:59:59.000Z

259

Industry Supply Chain Development (Ohio)  

Broader source: Energy.gov [DOE]

Supply Chain Development programs are focused on targeted industries that have significant growth opportunities for Ohio's existing manufacturing sector from emerging energy resources and...

260

Workforce Development | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

and development initiative provides building upgrade professionals with integrated energy efficiency tools, case studies, and best practices designed to dramatically reduce...

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Illinois Coal Development Program (Illinois)  

Broader source: Energy.gov [DOE]

The Illinois Coal Development Program seeks to advance promising clean coal technologies beyond research and towards commercialization. The program provides a 50/50 match with private industry...

262

Michigan Business Development Program (Michigan)  

Broader source: Energy.gov [DOE]

The Michigan Business Development Program provides grants, loans, and other economic assistance to businesses for highly competitive projects that create jobs and/or provide investment. A minimum...

263

Developing Alaskan Sustainable Housing Training  

Broader source: Energy.gov [DOE]

Hosted by the Association of Alaska Housing Authorities (AAHA), this three-day training event covers strategies and technical issues related to sustainable housing development.

264

National resources for development -- a suggested decision model  

E-Print Network [OSTI]

that is relevant to the nations of the third world in following the path of national development. Schumpeter's develop- ment theory revolves around the idea of a stationary, established system being altered from its course of the circular flow of economic life... relations are directed toward that goal. Secondly, as implied by Norgenthau, a primary source of a nation's power is its relative level of development. Third, despite the di? chotomy in the literature on political and economic de- velopment, power as a...

Henry, Sam Sherrill

1973-01-01T23:59:59.000Z

265

Modular approaches to statistical optimization: software development and implementation  

E-Print Network [OSTI]

LIBRARY FOR DEVELOPING IPC APPLICATIONS 44 A B r, D E F Introduction Design Goals IPC Library Implementation . . Client Authorization Approach to Protocol Implementation . Conclusion 44 44 45 48 49 50 VII APPLICATIONS L SING THE IPC I... covers systems developed to da, te. B. Overview of Circuit Optimization Systems Several approaches to integrated circuit design and optimiza. tion using an interactive environment have been developed iil]. The ICD i2j system implemented an interactive...

Meyer, Barry Dean

1990-01-01T23:59:59.000Z

266

Human Resources Organizational Development and Training 1  

E-Print Network [OSTI]

Human Resources Organizational Development and Training 1 Development Guide for Tufts Leadership Competencies Human Resources Training, Learning and Development Copyright © 2013 Tufts University Developed with Copperbeech Group Inc. #12;Human Resources Training, Learning and Development 2 #12;Human Resources Training

Dennett, Daniel

267

GEOTHERMAL ENERGY DEVELOPMENT Paul Kruger  

E-Print Network [OSTI]

SGP-TR 9 * GEOTHERMAL ENERGY DEVELOPMENT Paul Kruger C i v i l Engineering Department Stanford on an aggressive program t o develop its indigenous resources of geothermal energy. For more than a decade, geothermal energy has been heralded as one of the more promising forms of energy a l t e r n a t e t o o i l

Stanford University

268

Energy and Development Gordon Mackenzie  

E-Print Network [OSTI]

Energy and Development Gordon Mackenzie Energy Programme Coordinator UNEP Risø Centre #12;Energy · Nordic Arctic energy network #12;African Rural Energy Enterprise Development - AREED ENDA MFC KITE TaTEDO CEEEZ E+Co Africa E+Co NJ UNEP Paris URC UN Foundation Sida Others Demonstrating that needed energy

269

Harvard Institute for International Development  

E-Print Network [OSTI]

: economic policy reform, FDI, foreign direct investment, and India JEL codes: F21, F23 Nirupam Bajpai. #12;HIID Development Discussion Paper No. 759 1 Introduction India's economic policy reforms have Foreign Direct Investment in India: Issues and Problems Nirupam Bajpai and Jeffrey D. Sachs Development

270

IBM Software Design and development  

E-Print Network [OSTI]

IBM Software Design and development Thought Leadership White Paper Disciplined Agile Delivery software development paradigm. This trend is also echoed in other industry studies, including one con expensive and risky. It is time for a new genera- tion of agile process framework. #12;3IBM Software Here

Balmelli, Laurent

271

Houston Low Impact Development Competition  

E-Print Network [OSTI]

LID without Regs Moving an entrenched engineering community to sustainability without regulatory drivers American Institute of Architects HOUSTON CHAPTER American Society of Civil Engineers HOUSTON CHAPTER American Society of Landscape... the alternative Common Understanding HLWSF Objectives Explore the adaptation & implementation of sustainable development practices. LOW IMPACT DEVELOPMENT (LID) a.k.a., GREEN INFRASTRUCTURE (Can these practices be implemented without a regulatory driver...

Adair, R.

2011-01-01T23:59:59.000Z

272

Accelerating Development in the Americas  

E-Print Network [OSTI]

for governments and as a strategic tool for development strategies; · Creating reference cases and best practices by making them feel useful, but also that of their families. OAS & MICROSOFT Accelerating Sustainable for the economic development of our countries as it is part of the process of globalisation and therefore

Narasayya, Vivek

273

DWPF Development Plan. Revision 1  

SciTech Connect (OSTI)

The DWPF Development Plan is based on an evaluation process flowsheet and related waste management systems. The scope is shown in Figure 1 entitled ``DWPF Process Development Systems.`` To identify the critical development efforts, each system has been analyzed to determine: The identification of unresolved technology issues. A technology issue (TI) is one that requires basic development to resolve a previously unknown process or equipment problem and is managed via the Technology Assurance Program co-chaired by DWPF and SRTC. Areas that require further work to sufficiently define the process basis or technical operating envelop for DWPF. This activity involves the application of sound engineering and development principles to define the scope of work required to complete the technical data. The identification of the level of effort and expertise required to provide process technical consultation during the start-up and demonstration of this first of a kind plant.

Holtzscheiter, E.W.

1994-05-09T23:59:59.000Z

274

Holistic revitalization in small post-industrial cities : tools for urban housing development  

E-Print Network [OSTI]

For generations, housing programs have sought to utilize redevelopment projects to accomplish broader community revitalization goals. Contemporary affordable housing practice embodies this idea in large housing development ...

Beam, Jeffrey (Jeffrey J.)

2009-01-01T23:59:59.000Z

275

Developing and marketing a photovoltaics product  

SciTech Connect (OSTI)

This paper presents findings from a market assessment performed by Applied Energy Group, Inc. concerning a Photovoltaic (PV) product developed by Delmarva Power in conjunction with AC Battery and Ascension Technology and the University of Delaware, with sponsorship from the U.S. Department of Energy, This research was performed as part of Phase I of Delmarva`s PV:BONUS research project which has as its aim the development and eventual commercialization of a solar peak shaving device for commercial buildings. A second stage of market research will be pursued under Phase II of the PV:BONUS project to further target appropriate markets, identify and secure several demonstration installations, and develop a marketing campaign. This project provides an example of how a utility can leverage outside funding sources, such as the Department of Energy, to help further the dual goals of identifying new market areas as well as meeting a national policy objective -- the development and commercialization of renewable resource technologies. Technology development is, in fact, a major area of focus for the current administration and is seen as an imperative for the U.S.`s ability to compete in the global marketplace. U.S. electric utilities are in an excellent position to pursue this important niche of energy services as they begin to position themselves for an increasingly competitive environment both here and abroad.

Freeman, L.M.

1995-12-31T23:59:59.000Z

276

Analyzing the private development model for university real estate development  

E-Print Network [OSTI]

Universities within the Unites States have long been active in the real estate development market surrounding their respective campuses. However, beginning with the baby boom in the late 1950s, colleges have begun expanding ...

Gerrity, James F., IV (James Francis)

2009-01-01T23:59:59.000Z

277

Polymer OLED White Light Development Program  

SciTech Connect (OSTI)

OSRAM Opto Semiconductors (OSRAM) successfully completed development, fabrication and characterization of the large area, polymer based white light OLED prototype at their OLED Research and Development (R&D) facility in San Jose, CA. The program, funded by the Department of Energy (DOE), consisted of three key objectives: (1) Develop new polymer materials and device architectures--in order to improve the performance of organic light emitters. (2) Develop processing techniques--in order to demonstrate and enable the manufacturing of large area, white light and color tunable, solid state light sources. (3) Develop new electronics and driving schemes for organic light sources, including color-tunable light sources. The key performance goals are listed. A world record efficiency of 25 lm/W was established for the solution processed white organic device from the significant improvements made during the project. However, the challenges to transfer this technology from an R&D level to a large tile format such as, the robustness of the device and the coating uniformity of large area panels, remain. In this regard, the purity and the blend nature of the materials are two factors that need to be addressed in future work. During the first year, OSRAM's Materials and Device group (M&D) worked closely with the major polymer material suppliers to develop the polymer emissive technology. M&D was successful in demonstrating a 7-8 lm/W white light source which was based on fluorescent materials. However, it became apparent that the major gains in efficiency could only be made if phosphorescent materials were utilized. Thus, in order to improve the performance of the resulting devices, the focus of the project shifted towards development of solution-processable phosphorescent light emitting diodes (PHOLEDs) and device architectures. The result is a higher efficiency than the outlined project milestone.

Homer Antoniadis; Vi-En Choong; Stelios Choulis; Brian Cumpston; Rahul Gupta; Mathew Mathai; Michael Moyer; Franky So

2005-12-19T23:59:59.000Z

278

Development of a Drillrod/Telemetry Radar  

SciTech Connect (OSTI)

Efficient extraction of deeply buried natural resources is dependent upon accurate geologic models. The model becomes the basis for developing plans for extraction of the resource. Geoscientists working in geothermal and hydrocarbon recovery have a great deal in common with fellow geoscientists working in the mining industry. They appreciate the intractable problem of increasing the depth of investigation to tens of meters from the wellbore. The goal of this project was to develop a borehole radar tool to acquire data within tens of meters from the wellbore. For geothermal and hydrocarbon applications, the tool was to acquire data for mapping fractures surrounding the wellbore. In mining of coal, the radar acquires data for determining coal seam thickness and detecting geologic anomalies ahead of mining.

Raton Technology Research, Inc.

1999-11-12T23:59:59.000Z

279

Computational Tools to Accelerate Commercial Development  

SciTech Connect (OSTI)

The goals of the work reported are: to develop new computational tools and models to enable industry to more rapidly develop and deploy new advanced energy technologies; to demonstrate the capabilities of the CCSI Toolset on non-proprietary case studies; and to deploy the CCSI Toolset to industry. Challenges of simulating carbon capture (and other) processes include: dealing with multiple scales (particle, device, and whole process scales); integration across scales; verification, validation, and uncertainty; and decision support. The tools cover: risk analysis and decision making; validated, high-fidelity CFD; high-resolution filtered sub-models; process design and optimization tools; advanced process control and dynamics; process models; basic data sub-models; and cross-cutting integration tools.

Miller, David C.

2013-01-01T23:59:59.000Z

280

Lower Sioux Wind Feasibility & Development  

SciTech Connect (OSTI)

This report describes the process and findings of a Wind Energy Feasibility Study (Study) conducted by the Lower Sioux Indian Community (Community). The Community is evaluating the development of a wind energy project located on tribal land. The project scope was to analyze the critical issues in determining advantages and disadvantages of wind development within the Community. This analysis addresses both of the Community's wind energy development objectives: the single turbine project and the Commerical-scale multiple turbine project. The main tasks of the feasibility study are: land use and contraint analysis; wind resource evaluation; utility interconnection analysis; and project structure and economics.

Minkel, Darin

2012-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Advanced photovoltaic-trough development  

SciTech Connect (OSTI)

The scope of the work on photvoltaic troughs includes analytical studies, hardware development, and component testing. Various aspects of the system have been optimized and improvements have been realized, particularly in the receiver and reflecting surface designs. An empirical system performance model has been developed that closely agrees with measured system performance. This in-depth study of single-axis reflecting linear focus photovoltaic concentrators will be very beneficial in the development of improved models for similar systems as well as other phtovoltaic concentrator designs.

Spencer, R.; Yasuda, K.; Merson, B.

1982-04-01T23:59:59.000Z

282

Essays in Empirical Development Economics  

E-Print Network [OSTI]

story,” Journal of Development Economics, 91(1), 128–139.Oxford Bulletin of Economics and Statistics, 58(4), 450–474.to Learn,” Review of Economics and Statistics, 91(3), 437–

Ozier, Owen Whitfield

2010-01-01T23:59:59.000Z

283

Essays in climate and development  

E-Print Network [OSTI]

This dissertation is a collection of three essays on environmental policy and empirical development economics, unified in their underlying inquiry of the welfare effects of climate in Mexico. The first chapter presents ...

Guerrero Compeán, Roberto

2013-01-01T23:59:59.000Z

284

Community Development Financial Institutions Fund  

Broader source: Energy.gov [DOE]

The U.S. Department of Treasury is accepting applications on the Community Development Financial Institutions (CDFI) Fund, which has opened the fiscal year 2015 funding round for the CDFI Program...

285

Using Outreach to Develop and  

E-Print Network [OSTI]

't know - 46% · 36 percent of respondents left their pet's waste on the ground. #12;Develop Your Message Consumption Media Buy Awareness Got Behavior Change? Social Change Group Center for Social Marketing

286

Brownfield Development Tax Abatements (Alabama)  

Broader source: Energy.gov [DOE]

The Brownfield Development Tax Abatements gives cities and counties the ability to abate, non-educational city and county sales and use taxes, non-educational state, city and county property taxes ...

287

Economic Development Bond Program (Iowa)  

Broader source: Energy.gov [DOE]

Through its Economic Development Bond Program, the Iowa Finance Authority (IFA) issues tax-exempt bonds on behalf of private entities or organizations for eligible purposes. The responsibility for...

288

Economic Development Loan Fund (Virginia)  

Broader source: Energy.gov [DOE]

The Economic Development Loan Fund helps to fill the financing gap between private debt financing and private equity. Up to $1 million is available for each project and can be used for the...

289

Glasgow Centre for International Development  

E-Print Network [OSTI]

, the Universities of Dar es Salaam and Dodoma in Tanzania, North-West University in South Africa and the University and development · food security · human health · sustainable energy Currently, at the University of Glasgow

Glasgow, University of

290

Rural Development Advantage Program (Nebraska)  

Broader source: Energy.gov [DOE]

The Rural Development Advantage Program provides qualified businesses with refundable tax incentives for projects that create two new jobs and invest $125,000 in counties with less than 15,000...

291

Collaborative learning in software development  

E-Print Network [OSTI]

fields such as software process improvement, team research, organizational learning, organization scienceCollaborative learning in software development: An investigation of characteristics, prerequisites and Technology #12;[ii] Abstract Collaborative learning integrates individual and collective learning

Langseth, Helge

292

Three essays in development economics  

E-Print Network [OSTI]

This thesis seeks to analyze two questions central to the economic welfare of rural households in developing countries: the trade-offs between equity and efficiency induced by hybrid forms of property rights, and the ...

Leight, Jessica E. (Jessica Ellen)

2013-01-01T23:59:59.000Z

293

Laboratory directed research and development  

SciTech Connect (OSTI)

The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory's R D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering proof-of-principle''; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne's Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

Not Available

1991-11-15T23:59:59.000Z

294

Behavioral development of dusky dolphins  

E-Print Network [OSTI]

, 1999). Thomas and Taber (1982) reported that right whale (Eubalaena australis) calves spend the majority of their time traveling during their first year, and postulated that this may aid in muscle development. Given that delphinids are born with a...

Deutsch, Sierra Michelle

2009-05-15T23:59:59.000Z

295

Developing energy efficient filtering systems  

E-Print Network [OSTI]

Azzopardi,L. Vanderbauwhede,W. Moadeli,M. Proceedings of the 32nd international ACM SIGIR conference on Research and development in information retrieval (SIGIR09) pp 664-665 ACM

Azzopardi, L.

296

Community Development Block Grant (Kansas)  

Broader source: Energy.gov [DOE]

The Community Development Block Grant provides funds aimed at creating or retaining permanent jobs, which must be filled by a majority of low- and moderate-income persons. Eligible small city and...

297

State Barriers to CHP Development  

E-Print Network [OSTI]

Every year, ACEEE collects data on regulatory policies in each state that theoretically serve to promote and discourage combined heat and power (CHP) development. In our annual State Energy Efficiency Scorecard (5), we assess the regulatory...

Chittum, A.; Kaufman, N.

2011-01-01T23:59:59.000Z

298

Business Development - Predictive Maintenance Products  

E-Print Network [OSTI]

BUSINESS DEVELOPMENT - PREDICTIVE MAINTENANCE PRODUCTS Phillip Sceiczina, ifm efector, inc. In this time of global competitiveness, more companies are focusing on reducing manufacturing costs to increase profits. Energy costs can be a...

Sceiczina, P.

2005-01-01T23:59:59.000Z

299

Laboratory Directed Research and Development  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish the Department's, including the NNSA's, requirements for laboratory-directed research and development (LDRD) while providing the laboratory director broad flexibility for program implementation. Cancels DOE O 413.2. Canceled by DOE O 413.2B.

2001-01-08T23:59:59.000Z

300

ENERGY RESEARCH AND DEVELOPMENT ADMINISTRATION  

Office of Legacy Management (LM)

.' :h I : ' ENERGY RESEARCH AND DEVELOPMENT ADMINISTRATION WASHINGTON, D.C. 20545 October 24, 1975 :.. ,. Memo to Piles' CARNEGIE-MELLON SC&RCCYCLOTRON On October 23, 1975, W....

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Laboratory Directed Research and Development  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order establishes DOE requirements and responsibilities for laboratory directed research and development while providing laboratory directors with broad flexibility for program implementation. Cancels DOE O 413.2A. Admin Chg 1, 1-31-11.

2006-04-19T23:59:59.000Z

302

Water Development Districts (South Dakota)  

Broader source: Energy.gov [DOE]

The South Dakota Conservancy District is a governmental agency administered by the Board of Water and Natural Resources, but its duties are predominantly carried out by local Water Development...

303

Development of the Reradiant Recuperator  

E-Print Network [OSTI]

This presentation covers the development of a new concept in radiation type recuperators. This new concept will increase the efficiency of standard conventional radiant recuperators and will provide increased energy savings of 5 to 15% over...

Marnell, C. J.

1979-01-01T23:59:59.000Z

304

VETERINARY MEDICINE STUDENT SERVICES DEVELOPMENT  

E-Print Network [OSTI]

Medicine Student Services Development Project location: University of California, Davis Yolo County Lead · Reserves at Shields Library on the UC Davis campus · Yolo County Public Library at 315 East 14th Street

Schladow, S. Geoffrey

305

Development of Electrochemical Micro Machining  

E-Print Network [OSTI]

. Micro electrochemical machining (µECM) removes material while holding micron tolerances and µECM can machine hard metals and alloys. This study aims at developing a novel µECM utilizing high frequency voltage pulses and closed loop control... DEVELOPMENT OF ELECTROCHEMICAL MICRO MACHINING A Thesis by SRIHARSHA SRINIVAS SUNDARRAM Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER...

Srinivas Sundarram, Sriharsha

2008-10-10T23:59:59.000Z

306

NGNP Research and Development Status  

SciTech Connect (OSTI)

At the inception of the Next Generation Nuclear Plant (NGNP) project, experts from the Department of Energy (DOE) national laboratories, gas reactor vendors, and universities collaborated to establish technology research and development (R&D) roadmaps. These roadmaps outlined the testing and computational development activities needed to qualify the materials and validate the modeling and simulation tools to be used in the design and safe operation of the NGNP, a helium-cooled, high temperature gas reactor (HTGR).

David A. Petti

2010-08-01T23:59:59.000Z

307

Expanding the Trilinos developer community.  

SciTech Connect (OSTI)

The Trilinos Project started approximately nine years ago as a small effort to enable research, development and ongoing support of small, related solver software efforts. The 'Tri' in Trilinos was intended to indicate the eventual three packages we planned to develop. In 2007 the project expanded its scope to include any package that was an enabling technology for technical computing. Presently the Trilinos repository contains over 55 packages covering a broad spectrum of reusable tools for constructing full-featured scalable scientific and engineering applications. Trilinos usage is now worldwide, and many applications have an explicit dependence on Trilinos for essential capabilities. Users come from other US laboratories, universities, industry and international research groups. Awareness and use of Trilinos is growing rapidly outside of Sandia. Members of the external research community are becoming more familiar with Trilinos, its design and collaborative nature. As a result, the Trilinos project is receiving an increasing number of requests from external community members who want to contribute to Trilinos as developers. To-date we have worked with external developers in an ad hoc fashion. Going forward, we want to develop a set of policies, procedures, tools and infrastructure to simplify interactions with external developers. As we go forward with multi-laboratory efforts such as CASL and X-Stack, and international projects such as IESP, we will need a more streamlined and explicit process for making external developers 'first-class citizens' in the Trilinos development community. This document is intended to frame the discussion for expanding the Trilinos community to all strategically important external members, while at the same time preserving Sandia's primary leadership role in the project.

Heroux, Michael Allen

2010-10-01T23:59:59.000Z

308

JSF AND VISUAL WEB DEVELOPMENT  

E-Print Network [OSTI]

JSF AND VISUAL WEB DEVELOPMENT CHAPTER 41 Objectives To explain what JSF is (§41.1). To create/16/09 10:18 AM Page 41­1 #12;41­2 Chapter 41 JSF and Visual Web Development 41.1 Introduction The use of servlets, introduced in Chapter 39, is the foundation of the Java Web technology. It is a primitive way

Liang, Y. Daniel

309

Ceramic Component Development Process Analysis  

SciTech Connect (OSTI)

The development of ceramic components and coatings is critical to the demonstration of advanced fossil energy systems. Ceramic components and coating will play critical role in hot-gas filtration, high- temperature heat exchangers, thermal barrier coatings, and the hot- section of turbines. Continuous-fiber composites (CFCC) are expected to play an increasing role in these applications. This program encompassed five technical areas related to ceramic component development for fossil energy systems.

Boss, D.; Sambasivan, S.; Kuehmann, C. [Northwestern Univ., Evanston, IL (United States). Basic Industrial Research Lab.; Faber, K. [Northwestern University, MEAS Materials Science & Engineering, Evanston, IL (United States)

1996-12-31T23:59:59.000Z

310

ENERGY, ENVIRONMENT AND SUSTAINABLE DEVELOPMENT  

E-Print Network [OSTI]

ENERGY, ENVIRONMENT AND SUSTAINABLE DEVELOPMENT E u r o p e a n C o m m i s s i o n Community Research P r o j e c t s y n o p s e s EUR 19359 Vol. I: Marine processes, ecosystems and interactions Eur - Energy, environment and sustainable development Contact: Mr. Klaus - GĂĽnther BARTHEL - rue de la Loi, 200

Döös, Kristofer

311

Laboratory Directed Research and Development FY 2000  

SciTech Connect (OSTI)

The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab or LBNL) is a multi-program national research facility operated by the University of California for the Department of Energy (DOE). As an integral element of DOE's National Laboratory System, Berkeley Lab supports DOE's missions in fundamental science, energy resources, and environmental quality. Berkeley Lab programs advance four distinct goals for DOE and the nation: (1) To perform leading multidisciplinary research in the computing sciences, physical sciences, energy sciences, biosciences, and general sciences in a manner that ensures employee and public safety and protection of the environment. (2) To develop and operate unique national experimental facilities for qualified investigators. (3) To educate and train future generations of scientists and engineers to promote national science and education goals. (4) To transfer knowledge and technological innovations and to foster productive relationships among Berkeley Lab's research programs, universities, and industry in order to promote national economic competitiveness. Annual report on Laboratory Directed Research and Development for FY2000.

Hansen, Todd; Levy, Karin

2001-02-27T23:59:59.000Z

312

Recent developments of the US RERTR program  

SciTech Connect (OSTI)

The status of the US Reduced Enrichment Research and Test Reactor (RERTR) Program is reviewed. After a brief outline of the RERTR Program objectives, goals and past accomplishments, emphasis is placed on the developments which took place during 1983 and on current program plans and schedules. Most program activities have proceeded as planned and a combination of two silicide fuels (U/sub 3/Si/sub 2/-Al and U/sub 3/Si-Al) was found to hold excellent promise for achieving the long-term program goals. A modification of the program plan, including the development and demonstration of those fuels, was prepared and is now being implemented. The uranium density of qualified RERTR fuels for plate-type reactors is forecasted to grow by approximately 1 g U/cm/sup 3/ each year, from the current 1.7 g U/cm/sup 3/ to the 7.0 g U/cm/sup 3/ which will be reached in 1988. The technical needs of research reactors for HEU exports are also forecasted to undergo a gradual and dramatic decline in the coming years.

Travelli, A.

1983-01-01T23:59:59.000Z

313

Training and Workforce Development Forum Newsletter | Department...  

Broader source: Energy.gov (indexed) [DOE]

Training and Workforce Development Forum Newsletter Training and Workforce Development Forum Newsletter Training and Workforce Development Forum Newsletter Training and Workforce...

314

Guide to Sustainable Development and Environmental Policy  

E-Print Network [OSTI]

Review: Guide to Sustainable Development and EnvironmentalEds. ). Guide to Sustainable Development and EnvironmentalThe Guide to Sustainable Development and Environmental

Mirza, Umar Karim

2002-01-01T23:59:59.000Z

315

The Green Cathedral: Sustainable Development of Amazonia  

E-Print Network [OSTI]

The Green Cathedral: Sustainable Development of Amazonia R.The Green Cathedral: Sustainable Development of Amazonia. (Ais between sustainable and unsustainable development of the

Tobin, R. James

1994-01-01T23:59:59.000Z

316

Economic Development Tax Credit Program (Wisconsin)  

Broader source: Energy.gov [DOE]

The Economic Development Tax Credit (ETC) program was enacted in 2009 and eliminated five existing tax credit programs (Agricultural Development Zones, Airport Development Zones, Community...

317

Emerging Water Heating Technologies Research & Development Roadmap...  

Broader source: Energy.gov (indexed) [DOE]

Water Heating Technologies Research & Development Roadmap Emerging Water Heating Technologies Research & Development Roadmap The Research and Development (R&D) Roadmap for Emerging...

318

“Sustainable development of hydropower in third countries...  

Broader source: Energy.gov (indexed) [DOE]

&8220;Sustainable development of hydropower in third countries: The development of hydropower on a sustainable basis has been an array of humanitarian and economic development,...

319

Guide to Sustainable Development and Environmental Policy  

E-Print Network [OSTI]

Development and Environmental Policy By Natalia MirovitskayaDevelopment and Environmental Policy. Durham, NC: DukeDevelopment and Environmental Policy is a work by 25

Mirza, Umar Karim

2002-01-01T23:59:59.000Z

320

HUMID AIR TURBINE CYCLE TECHNOLOGY DEVELOPMENT PROGRAM  

SciTech Connect (OSTI)

The Humid Air Turbine (HAT) Cycle Technology Development Program focused on obtaining HAT cycle combustor technology that will be the foundation of future products. The work carried out under the auspices of the HAT Program built on the extensive low emissions stationary gas turbine work performed in the past by Pratt & Whitney (P&W). This Program is an integral part of technology base development within the Advanced Turbine Systems Program at the Department of Energy (DOE) and its experiments stretched over 5 years. The goal of the project was to fill in technological data gaps in the development of the HAT cycle and identify a combustor configuration that would efficiently burn high moisture, high-pressure gaseous fuels with low emissions. The major emphasis will be on the development of kinetic data, computer modeling, and evaluations of combustor configurations. The Program commenced during the 4th Quarter of 1996 and closed in the 4th Quarter of 2001. It teamed the National Energy Technology Laboratory (NETL) with P&W, the United Technologies Research Center (UTRC), and a subcontractor on-site at UTRC, kraftWork Systems Inc. The execution of the program started with bench-top experiments that were conducted at UTRC for extending kinetic mechanisms to HAT cycle temperature, pressure, and moisture conditions. The fundamental data generated in the bench-top experiments was incorporated into the analytical tools available at P&W to design the fuel injectors and combustors. The NETL then used the hardware to conduct combustion rig experiments to evaluate the performance of the combustion systems at elevated pressure and temperature conditions representative of the HAT cycle. The results were integrated into systems analysis done by kraftWork to verify that sufficient understanding of the technology had been achieved and that large-scale technological application and demonstration could be undertaken as follow-on activity. An optional program extended the experimental combustion evaluations to several specific technologies that can be used with HAT technology. After 5 years of extensive research and development, P&W is pleased to report that the HAT Technology Development Program goals have been achieved. With 0 to 10 percent steam addition, emissions achieved during this program featured less than 8 ppm NO{sub x}, less than 16 ppm CO, and unburned hydrocarbons corrected to 15 percent O{sub 2} for an FT8 engine operating between 0 and 120 F with 65 to 100 percent power at any day.

Richard Tuthill

2002-07-18T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Hualapai Tribal Utility Development Project  

SciTech Connect (OSTI)

The first phase of the Hualapai Tribal Utility Development Project (Project) studied the feasibility of establishing a tribally operated utility to provide electric service to tribal customers at Grand Canyon West (see objective 1 below). The project was successful in completing the analysis of the energy production from the solar power systems at Grand Canyon West and developing a financial model, based on rates to be charged to Grand Canyon West customers connected to the solar systems, that would provide sufficient revenue for a Tribal Utility Authority to operate and maintain those systems. The objective to establish a central power grid over which the TUA would have authority and responsibility had to be modified because the construction schedule of GCW facilities, specifically the new air terminal, did not match up with the construction schedule for the solar power system. Therefore, two distributed systems were constructed instead of one central system with a high voltage distribution network. The Hualapai Tribal Council has not taken the action necessary to establish the Tribal Utility Authority that could be responsible for the electric service at GCW. The creation of a Tribal Utility Authority (TUA) was the subject of the second objective of the project. The second phase of the project examined the feasibility and strategy for establishing a tribal utility to serve the remainder of the Hualapai Reservation and the feasibility of including wind energy from a tribal wind generator in the energy resource portfolio of the tribal utility (see objective 2 below). It is currently unknown when the Tribal Council will consider the implementation of the results of the study. Objective 1 - Develop the basic organizational structure and operational strategy for a tribally controlled utility to operate at the Tribe’s tourism enterprise district, Grand Canyon West. Coordinate the development of the Tribal Utility structure with the development of the Grand Canyon West Power Project construction of the power infrastructure at Grand Canyon West. Develop the maintenance and operations capacity necessary to support utility operations. Develop rates for customers on the Grand Canyon West “mini-grid” sufficient for the tribal utility to be self-sustaining. Establish an implementation strategy for tribal utility service at Grand Canyon West Objective 2 - Develop a strategy for tribal utility takeover of electric service on the Reservation. Perform a cost analysis of Reservation electrical service. Develop an implementation strategy for tribal takeover of Reservation electrical service. Examine options and costs associated with integration of the Tribe’s wind resources.

Hualapai Tribal Nation

2008-05-25T23:59:59.000Z

322

Human Resources Organizational Development and Training  

E-Print Network [OSTI]

Human Resources Organizational Development and Training November 2009 Development Guide for Tufts Organizational Competencies Copyright © 2009 Tufts University #12;Human Resources Organizational Development Resources Organizational Development and Training 3 INTRODUCTION TO THE GUIDE November 2009 Dear Tufts

Dennett, Daniel

323

Advanced Emissions Control Development Program  

SciTech Connect (OSTI)

Babcock & Wilcox (B&W) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using B&W?s new Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species hydrogen chloride and hydrogen fluoride.

A. P. Evans

1998-12-03T23:59:59.000Z

324

Advanced Emission Control Development Program.  

SciTech Connect (OSTI)

Babcock & Wilcox (B&W) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using B&W`s new Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species hydrogen chloride and hydrogen fluoride.

Evans, A.P.

1997-12-31T23:59:59.000Z

325

Advanced Emissions Control Development Program  

SciTech Connect (OSTI)

McDermott Technology, Inc. (MTI) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using the Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species, hydrogen chloride and hydrogen fluoride.

A. P. Evans

1998-12-03T23:59:59.000Z

326

Advanced Emissions Control Development Program  

SciTech Connect (OSTI)

McDermott Technology, Inc. (MTI) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using the Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and hydrogen chloride and hydrogen fluoride.

M. J. Holmes

1998-12-03T23:59:59.000Z

327

HTS Wire Development Workshop: Proceedings  

SciTech Connect (OSTI)

The 1994 High-Temperature Superconducting Wire Development Workshop was held on February 16--17 at the St. Petersburg Hilton and Towers in St. Petersburg, Florida. The meeting was hosted by Florida Power Corporation and sponsored by the US Department of Energy`s Superconductivity Program for Electric Power Systems. The meeting focused on recent high-temperature superconducting wire development activities in the Department of Energy`s Superconductivity Systems program. The meeting opened with a general discussion on the needs and benefits of superconductivity from a utility perspective, the US global competitiveness position, and an outlook on the overall prospects of wire development. The meeting then focused on four important technology areas: Wire characterization: issues and needs; technology for overcoming barriers: weak links and flux pinning; manufacturing issues for long wire lengths; and physical properties of HTS coils. Following in-depth presentations, working groups were formed in each technology area to discuss the most important current research and development issues. The working groups identified research areas that have the potential for greatly enhancing the wire development effort. These areas are discussed in the summary reports from each of the working groups. This document is a compilation of the workshop proceedings including all general session presentations and summary reports from the working groups.

Not Available

1994-07-01T23:59:59.000Z

328

OSPREY Model Development Status Update  

SciTech Connect (OSTI)

During the processing of used nuclear fuel, volatile radionuclides will be discharged to the atmosphere if no recovery processes are in place to limit their release. The volatile radionuclides of concern are 3H, 14C, 85Kr, and 129I. Methods are being developed, via adsorption and absorption unit operations, to capture these radionuclides. It is necessary to model these unit operations to aid in the evaluation of technologies and in the future development of an advanced used nuclear fuel processing plant. A collaboration between Fuel Cycle Research and Development Offgas Sigma Team member INL and a NEUP grant including ORNL, Syracuse University, and Georgia Institute of Technology has been formed to develop off gas models and support off gas research. Georgia Institute of Technology is developing fundamental level model to describe the equilibrium and kinetics of the adsorption process, which are to be integrated with OSPREY. This report discusses the progress made on expanding OSPREY to be multiple component and the integration of macroscale and microscale level models. Also included in this report is a brief OSPREY user guide.

Veronica J Rutledge

2014-04-01T23:59:59.000Z

329

Department of Urban and Rural Development Division of Rural Development  

E-Print Network [OSTI]

Bergman Lodin Publication Record ­ Johanna Bergman Lodin Articles in Academic Journals Bergman Lodin) (2007, February): 41­45. Academic Theses Bergman Lodin, Johanna. 2012. Engendered promises, gendered Development Publication Record Johanna Bergman Lodin Select Academic Reports and Conference Papers Nasrin

330

Gerding Edlen Development Gerding Edlen Development Company, LLC  

E-Print Network [OSTI]

and private sector · Some of the most complex projects in the US · First Historic LEED Platinum, Largest LEED Rainwater Harvesting & Reuse 7 Ventless Dryers 1 Wastewater Treatment 2 Gerding Edlen Development Company PCC Willow Creek #12;6 INTEGRATED WIND WASTEWATER TREATMENT CENTRALIZED CHILLED

331

Xcel Energy - Renewable Development Fund Grants | Department...  

Broader source: Energy.gov (indexed) [DOE]

Xcel Energy - Renewable Development Fund Grants Xcel Energy - Renewable Development Fund Grants < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional...

332

Alternative Energy Development and China's Energy Future  

E-Print Network [OSTI]

development and transmission planning between the State Council, State Electricity Regulatory Council, grid companies, renewable energy developers and local

Zheng, Nina

2012-01-01T23:59:59.000Z

333

Plasmatron Fuel Reformer Development and Internal Combustion...  

Broader source: Energy.gov (indexed) [DOE]

Plasmatron Fuel Reformer Development and Internal Combustion Engine Vehicle Applications Plasmatron Fuel Reformer Development and Internal Combustion Engine Vehicle Applications...

334

ITP Industrial Materials: Development and Commercialization of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Industrial Materials: Development and Commercialization of Alternative Carbon Fiber Precursors and Conversion Technologies ITP Industrial Materials: Development and...

335

Geothermal Electricity Technology Evaluation Model (GETEM) Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Electricity Technology Evaluation Model (GETEM) Development Geothermal Electricity Technology Evaluation Model (GETEM) Development Project objective: Provide a tool for estimating...

336

Grid Connectivity Research, Development & Demonstration Projects...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Connectivity Research, Development & Demonstration Projects Grid Connectivity Research, Development & Demonstration Projects 2013 DOE Hydrogen and Fuel Cells Program and Vehicle...

337

Regulatory Considerations for Developing Generation Projects...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Generation Projects on Federal Lands Regulatory Considerations for Developing Generation Projects on Federal Lands Presentation covers regulatory considerations for developing...

338

Advancing Development and Greenhouse Gas Reductions in Vietnam's Wind Sector  

SciTech Connect (OSTI)

Clean energy development is a key component of Vietnam's Green Growth Strategy, which establishes a target to reduce greenhouse gas (GHG) emissions from domestic energy activities by 20-30 percent by 2030 relative to a business-as-usual scenario. Vietnam has significant wind energy resources, which, if developed, could help the country reach this target while providing ancillary economic, social, and environmental benefits. Given Vietnam's ambitious clean energy goals and the relatively nascent state of wind energy development in the country, this paper seeks to fulfill two primary objectives: to distill timely and useful information to provincial-level planners, analysts, and project developers as they evaluate opportunities to develop local wind resources; and, to provide insights to policymakers on how coordinated efforts may help advance large-scale wind development, deliver near-term GHG emission reductions, and promote national objectives in the context of a low emission development framework.

Bilello, D.; Katz, J.; Esterly, S.; Ogonowski, M.

2014-09-01T23:59:59.000Z

339

Historical development of the windmill  

SciTech Connect (OSTI)

Throughout history, windmill technology represented the highest levels of development in those technical fields we now refer to as mechanical engineering, civil engineering, and aerodynamics. This report describes key stages in the technical development of windmills as prime movers -- from antiquity to construction of the well-known Smith-Putnam wind turbine generator of the 1940's, which laid the foundation for modern wind turbines. Subjects covered are windmills in ancient times; the vertical-axis Persian windmill; the horizontal-axis European windmill (including both post mills and tower mills); technology improvements in sails, controls, and analysis; the American farm windmill; the transition from windmills to wind turbines for generating electricity at the end of the 19th century; and wind turbine development in the first half of the 20th century. 43 refs.

Shepherd, D.G.

1990-12-01T23:59:59.000Z

340

Power plants development in Romania  

SciTech Connect (OSTI)

The Romanian PV research program initiated in 1980 has as its aim the development of the Romanian own PV network from solar cells production to demonstration projects and commercial applications. Concerning the PV grid connected systems the Romanian research program is financed by the Romanian Ministry for Research and Technology. Setting out the main objectives and the related stages of this project, in the paper are presented aspects concerning the plant configuration, its component characteristics and preliminary achieved results. The aspects which are going to be developed in the following stages of the grid-connected PV plant implementation in Romania are also underlined.

Tanasescu, F.T. [Ministry of Research and Technology, Bucharest (Romania); Olariu, N. [Univ. Targoviste (Romania). Energy and Environment Research Dept.

1994-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Magnesium Research and Technology Development  

SciTech Connect (OSTI)

The Magnesium Research and Technical Development (MR&TD) project supports efforts to increase using magnesium in automotive applications, including improving technology, lowering costs and increasing the knowledge needed to enable alloy and manufacturing process optimization. MR&TD supports the U.S. Department of Energy (DOE)/United States Automotive Materials Partnership (USAMP) Magnesium Front End Research and Development (MFERD) project in collaboration with China and Canada. The MR&TD projects also maintains the magnesium bibliographic database at magnesium.pnl.gov.

Nyberg, Eric A.; Joost, William; Smith, Mark T.

2009-12-30T23:59:59.000Z

342

Wind Energy Career Development Program  

SciTech Connect (OSTI)

Saint Francis University has developed curriculum in engineering and in business that is meeting the needs of students and employers (Task 1) as well as integrating wind energy throughout the curriculum. Through a variety of approaches, the University engaged in public outreach and education that reached over 2,000 people annually (Task 2). We have demonstrated, through the success of these programs, that students are eager to prepare for emerging jobs in alternative energy, that employers are willing to assist in developing employees who understand the broader business and policy context of the industry, and that people want to learn about wind energy.

Gwen Andersen

2012-03-29T23:59:59.000Z

343

Sensor Development for PEM Fuel Cell Systems  

SciTech Connect (OSTI)

This document reports on the work done by Honeywell Sensing and Control to investigate the feasibility of modifying low cost Commercial Sensors for use inside a PEM Fuel Cell environment. Both stationary and automotive systems were considered. The target environment is hotter (100 C) than the typical commercial sensor maximum of 70 C. It is also far more humid (100% RH condensing) than the more typical 95% RH non-condensing at 40 C (4% RH maximum at 100 C). The work focused on four types of sensors, Temperature, Pressure, Air Flow and Relative Humidity. Initial design goals were established using a market research technique called Market Driven Product Definition (MDPD). A series of interviews were conducted with various users and system designers in their facilities. The interviewing team was trained in data taking and analysis per the MDPD process. The final result was a prioritized and weighted list of both requirements and desires for each sensor. Work proceeded on concept development for the 4 types of sensors. At the same time, users were developing the actual fuel cell systems and gaining knowledge and experience in the use of sensors and controls systems. This resulted in changes to requirements and desires that were not anticipated during the MDPD process. The concepts developed met all the predicted requirements. At the completion of concept development for the Pressure Sensor, it was determined that the Fuel Cell developers were happy with off-the-shelf automotive pressure sensors. Thus, there was no incentive to bring a new Fuel Cell Specific Pressure Sensor into production. Work was therefore suspended. After the experience with the Pressure Sensor, the requirements for a Temperature Sensor were reviewed and a similar situation applied. Commercially available temperature sensors were adequate and cost effective and so the program was not continued from the Concept into the Design Phase.

Steve Magee; Richard Gehman

2005-07-12T23:59:59.000Z

344

Gaseous Detectors: recent developments and applications  

E-Print Network [OSTI]

Since long time, the compelling scientific goals of future high energy physics experiments were a driving factor in the development of advanced detector technologies. A true innovation in detector instrumentation concepts came in 1968, with the development of a fully parallel readout for a large array of sensing elements - the Multiwire Proportional Chamber (MWPC), which earned Georges Charpak a Nobel prize in physics in 1992. Since that time radiation detection and imaging with fast gaseous detectors, capable of economically covering large detection volume with low mass budget, have been playing an important role in many fields of physics. Advances in photo-lithography and micro-processing techniques in the chip industry during the past decade triggered a major transition in the field of gas detectors from wire structures to Micro-Pattern Gas Detector (MPGD) concepts, revolutionizing cell size limitations for many gas detector applications. The high radiation resistance and excellent spatial and time resolution make them an invaluable tool to confront future detector challenges at the next generation of colliders. The design of the new micro-pattern devices appears suitable for industrial production. Novel structures where MPGDs are directly coupled to the CMOS pixel readout represent an exciting field allowing timing and charge measurements as well as precise spatial information in 3D. Originally developed for the high energy physics, MPGD applications has expanded to nuclear physics, UV and visible photon detection, astroparticle and neutrino physics, neutron detection and medical physics.

Maxim Titov

2010-08-24T23:59:59.000Z

345

Steel-SiC Metal Matrix Composite Development  

SciTech Connect (OSTI)

The goal of this project is to develop a method for fabricating SiC-reinforced high-strength steel. We are developing a metal-matrix composite (MMC) in which SiC fibers are be embedded within a metal matrix of steel, with adequate interfacial bonding to deliver the full benefit of the tensile strength of the SiC fibers in the composite.

Smith, Don D.

2005-07-17T23:59:59.000Z

346

Exploratory battery technology development and testing report for 1989  

SciTech Connect (OSTI)

Sandia National Laboratories, Albuquerque, has been designated as Lead Center for the Exploratory Battery Technology Development and Testing Project, which is sponsored by the US Department of Energy's Office of Energy Storage and Distribution. In this capacity, Sandia is responsible for the engineering development of advanced rechargeable batteries for both mobile and stationary energy storage applications. This report details the technical achievements realized in pursuit of the Lead Center's goals during calendar year 1989. 4 refs., 84 figs., 18 tabs.

Magnani, N.J.; Diegle, R.B.; Braithwaite, J.W.; Bush, D.M.; Freese, J.M.; Akhil, A.A.; Lott, S.E.

1990-12-01T23:59:59.000Z

347

Productivity improvement for longwall development  

SciTech Connect (OSTI)

Industry survey reveals coal operators thoughts about the use of different techniques to keep development ahead of longwall production. Factors considered that can optimise productivity include mine design (the number of entries, size of pillars etc.), work schedules, preventative maintenance programs and good management. The article was adapted from a presentation to Longwall USA 2005, in June 2005 (Pittsburgh, PA, USA). 3 figs.

Whipkey, K. [Norwest, Ashland, KY (United States)

2005-08-01T23:59:59.000Z

348

Deformable human body model development  

SciTech Connect (OSTI)

This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). A Deformable Human Body Model (DHBM) capable of simulating a wide variety of deformation interactions between man and his environment has been developed. The model was intended to have applications in automobile safety analysis, soldier survivability studies and assistive technology development for the disabled. To date, we have demonstrated the utility of the DHBM in automobile safety analysis and are currently engaged in discussions with the U.S. military involving two additional applications. More specifically, the DHBM has been incorporated into a Virtual Safety Lab (VSL) for automobile design under contract to General Motors Corporation. Furthermore, we have won $1.8M in funding from the U.S. Army Medical Research and Material Command for development of a noninvasive intracranial pressure measurement system. The proposed research makes use of the detailed head model that is a component of the DHBM; the project duration is three years. In addition, we have been contacted by the Air Force Armstrong Aerospace Medical Research Laboratory concerning possible use of the DHBM in analyzing the loads and injury potential to pilots upon ejection from military aircraft. Current discussions with Armstrong involve possible LANL participation in a comparison between DHBM and the Air Force Articulated Total Body (ATB) model that is the current military standard.

Wray, W.O.; Aida, T.

1998-11-01T23:59:59.000Z

349

ForestDevelopment Community Forestry  

E-Print Network [OSTI]

in Africa as a basis for developing applied integrated, multiple use forest resource management for timber and non-timber forest products from these systems, and for forest rehabilitation af- ter degradation from to Fusarium circinatum. Forestry companies worldwide have tried to hybridise P. radiata with other Pinus

Geldenhuys, Jaco

350

Web Page Development Company Description  

E-Print Network [OSTI]

Web Page Development Company Description: Service Provider web site Short Project Name: Research support and networking. Company Description: Website Building Company. This company drives traffic to websites through search engines, and optimizes websites over time. Short Project Name: Site Build Project

Dahl, David B.

351

Developing the Right Test Documentation  

E-Print Network [OSTI]

and managing testing and test documentation. Over the past 17 years, we have criticized IEEE standard 829 (onDeveloping the Right Test Documentation Cem Kaner, J.D., Ph.D. Department of Computer Sciences Quality Conference #12;2Test Documentation Copyright © 2001 Cem Kaner and James Bach. All rights reserved

352

ASIAN DEVELOPMENT ECONOMICS Winter 2014  

E-Print Network [OSTI]

and the Financial System Week 8 (02/27) Chapter 11 Globalization and the New Economy Week 9 (03/03) Chapter 13 economies to which the US economy is increasingly connected. The course will give students a flavor of political economy to examine Asia's economic development Prerequisites: ECON 271, ECON 272 or permission

Carter, John

353

Harvard Institute for International Development  

E-Print Network [OSTI]

The Progress of Policy Reform and Variations in Performance at the Sub-National Level in India Nirupam Bajpai; trade and exchange rate policy; industrial policy; foreign investment policy and so on, India's stateHarvard Institute for International Development HARVARD UNIVERSITY The Progress of Policy Reform

354

Business Plan Development Company Description  

E-Print Network [OSTI]

by the establishment of additional work stations. Raw materials purchasing and subsequent manufacturing need to be done purchasing and manufacturing under my personal name to-date. The concept of the device I patented market, marketing plan, web development, manufacturing plan to allow for maximum profit margin while

Dahl, David B.

355

Foreign Fishery Developments Japanese Joint  

E-Print Network [OSTI]

-215. In 1981,193 joint ventures with the par- ticipation of Japanese capital were operating in 47 nationsForeign Fishery Developments Japanese Joint Fishing Ventures Stabilize Activity Trawling Skipjack tuna harvest Whaling Other harvests Aquaculture Refrigeration operations Fish processing Average $1

356

Laboratory Directed Research and Development  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order establishes DOE requirements for laboratory directed research and development (LDRD) while providing the laboratory director broad flexibility for program implementation. Cancels DOE O 413.3A. Admin Chg 1, dated 1-31-11, cancels DOE O 413.3B. Certified 7-14-2011.

2006-04-19T23:59:59.000Z

357

Developments in Digital Cinema Projection  

E-Print Network [OSTI]

Developments in Digital Cinema Projection Barry Silverstein Projection Technology Manager Entertainment Imaging, Eastman Kodak 4pm, Wed., Nov. 1, 2006 Auditorium of the Center for Imaging Science George and color, the switch to Digital Technology. The Digital Cinema conversion process is just beginning. It has

Zanibbi, Richard

358

Developing visual associations through filmmaking  

E-Print Network [OSTI]

.................................................... 9 4.CREATING THE ROADMAP.................................... 11 5.TRAVERSING THE ROADMAP.................................. 12 6.DEVELOPING A HISTORY...................................... 13 7.WITHHOLDING EVENTS... to a visual abstraction of the film’s structure, or a roadmap as I called it. 11 4. CREATING THE ROADMAP Before adding all the details that occupy the world of Discretion, a very basic roadmap was created to visualize the basic decisions...

Shetti, Vishwanand Venkatesh

2008-10-10T23:59:59.000Z

359

Agricultural Sciences for Global Development  

E-Print Network [OSTI]

's areas of expertise cover other urgent global issues such as energy supply, climate change, biodiversity, like food security and climate change, are truly global. The global arena is changing fast therefore and the environment in developing countries. Our research is conducted in close cooperation with partners in a large

360

International Development Activities and Opportunities  

E-Print Network [OSTI]

of Stirling - UNESCO Scotland #12;Energy Renewable and sustainable energy systems - University of Edinburgh - Heriot Watt University - University of Glasgow Much of the work on Scotland's renewable energy options will be applicable to developing countries (e.g. components of the UK Energy Research Centre) #12;Cross Cutting

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Information Exchange for theInformation Exchange for the Development of SustainableDevelopment of Sustainable  

E-Print Network [OSTI]

Information Exchange for theInformation Exchange for the Development of SustainableDevelopment influenced the development ofthe development of sustainable wood process industrysustainable wood process industry substantiallysubstantially .. Information Exchange for the development of Sustainable Wood Process

362

Advanced Modular Inverter Technology Development  

SciTech Connect (OSTI)

Electric and hybrid-electric vehicle systems require an inverter to convert the direct current (DC) output of the energy generation/storage system (engine, fuel cells, or batteries) to the alternating current (AC) that vehicle propulsion motors use. Vehicle support systems, such as lights and air conditioning, also use the inverter AC output. Distributed energy systems require an inverter to provide the high quality AC output that energy system customers demand. Today's inverters are expensive due to the cost of the power electronics components, and system designers must also tailor the inverter for individual applications. Thus, the benefits of mass production are not available, resulting in high initial procurement costs as well as high inverter maintenance and repair costs. Electricore, Inc. (www.electricore.org) a public good 501 (c) (3) not-for-profit advanced technology development consortium assembled a highly qualified team consisting of AeroVironment Inc. (www.aerovironment.com) and Delphi Automotive Systems LLC (Delphi), (www.delphi.com), as equal tiered technical leads, to develop an advanced, modular construction, inverter packaging technology that will offer a 30% cost reduction over conventional designs adding to the development of energy conversion technologies for crosscutting applications in the building, industry, transportation, and utility sectors. The proposed inverter allows for a reduction of weight and size of power electronics in the above-mentioned sectors and is scalable over the range of 15 to 500kW. The main objective of this program was to optimize existing AeroVironment inverter technology to improve power density, reliability and producibility as well as develop new topology to reduce line filter size. The newly developed inverter design will be used in automotive and distribution generation applications. In the first part of this program the high-density power stages were redesigned, optimized and fabricated. One of the main tasks was to design and validate new gate drive circuits to provide the capability of high temp operation. The new power stages and controls were later validated through extensive performance, durability and environmental tests. To further validate the design, two power stages and controls were integrated into a grid-tied load bank test fixture, a real application for field-testing. This fixture was designed to test motor drives with PWM output up to 50kW. In the second part of this program the new control topology based on sub-phases control and interphase transformer technology was successfully developed and validated. The main advantage of this technology is to reduce magnetic mass, loss and current ripple. This report summarizes the results of the advanced modular inverter technology development and details: (1) Power stage development and fabrication (2) Power stage validation testing (3) Grid-tied test fixture fabrication and initial testing (4) Interphase transformer technology development

Adam Szczepanek

2006-02-04T23:59:59.000Z

363

Flight Projects 2 Technology and Space Program Development 13  

E-Print Network [OSTI]

Ellerest when the picture was taken; the western Pacific Ocean, western Australia, and eastern Asia system, the practical utilization of space, and in the development of new energy technologies are steadily approaching the goal of providing solar cell arrays at a cost com- petitive with other energy

Waliser, Duane E.

364

Toxicology 198 (2004) 3944 Arsenic drinking water regulations in developing  

E-Print Network [OSTI]

Toxicology 198 (2004) 39­44 Arsenic drinking water regulations in developing countries identified 10 g/l as a goal which later became the World Health Organization Guideline for drinking water in 1992. Epidemiological studies have shown that about one in 10 people drinking water containing 500 g

California at Berkeley, University of

365

Development of casthouse expert system for tapping  

SciTech Connect (OSTI)

Although the standardization of casting operations is necessary to secure stable blast furnace operation, intuitive practices (which are by definition non-quantifiable) and experience are prevalent. Because BF operation is a field which is difficult to standardize and reduce to documentary form, the present work had as its goal the standardization of judgments and systematization of information related to taphole opening and closing. The project was carried out in the highly computerized environment at Mizushima No. 3 BF, where the authors introduced an expert system guidance function in February, 1992. Standardization of operations through the use of this guidance system and the completion of guidance function development resulted in better consistency in taphole depths and optimization of the size of the taphole (taphole volume), which have in turn led to improvement in the pig/slag balance and a reduction in the time required for taphole opening.

Takihira, K.; Ino, K.; Yamana, S.; Masumoto, S.; Sugawara, H. (Kawasaki Steel Corp., Tokyo (Japan). Ironmaking Dept.)

1993-01-01T23:59:59.000Z

366

Process-Based Quality (PBQ) Tools Development  

SciTech Connect (OSTI)

The objective of this effort is to benchmark the development of process-based quality tools for application in CAD (computer-aided design) model-based applications. The processes of interest are design, manufacturing, and quality process applications. A study was commissioned addressing the impact, current technologies, and known problem areas in application of 3D MCAD (3-dimensional mechanical computer-aided design) models and model integrity on downstream manufacturing and quality processes. The downstream manufacturing and product quality processes are profoundly influenced and dependent on model quality and modeling process integrity. The goal is to illustrate and expedite the modeling and downstream model-based technologies for available or conceptual methods and tools to achieve maximum economic advantage and advance process-based quality concepts.

Cummins, J.L.

2001-12-03T23:59:59.000Z

367

Development of the Astro Edge solar array  

SciTech Connect (OSTI)

The Astro Edge solar array is a new and innovative low concentrator power generating system which has been selected for CTA Incorporated`s NASA Small Spacecraft Technology Initiative (SSTI) program. Under the program, Astro will design, develop, produce and qualify two flight Astro Edge wings to support a July 1996 launch of the SSTI SmallSat dubbed ``CLARK``. The Astro Edge was selected as a new technology to benefit future NASA and commercial missions by providing high specific power, high stiffness, low risk, low stowed volume, reliability, light weight, and cost reduction features to meet the agency`s better, faster, cheaper goals. A brief program overview of design requirements, configuration, subsystem description, analysis, and planned testing of the SSTI Astro Edge solar array is discussed.

Spence, B.R.; Marks, G.W. [Astro Aerospace Corp., Carpinteria, CA (United States)

1994-12-31T23:59:59.000Z

368

Exploration Technology Development Project Summary  

E-Print Network [OSTI]

· Significant cost reduction in photovoltaic array components Goals: #12;OFFICE OF THE CHIEF TECHNOLOGIST www lithium ion batteries · Regenerative fuel cells · Photovoltaic arrays Outcomes: · Increased battery life

Waliser, Duane E.

369

Energy technology progress for sustainable development  

SciTech Connect (OSTI)

Energy security is a fundamental part of a country`s national security. Access to affordable, environmentally sustainable energy is a stabilizing force and is in the world community`s best interest. The current global energy situation however is not sustainable and has many complicating factors. The primary goal for government energy policy should be to provide stability and predictability to the market. This paper differentiates between short-term and long-term issues and argues that although the options for addressing the short-term issues are limited, there is an opportunity to alter the course of long-term energy stability and predictability through research and technology development. While reliance on foreign oil in the short term can be consistent with short-term energy security goals, there are sufficient long-term issues associated with fossil fuel use, in particular, as to require a long-term role for the federal government in funding research. The longer term issues fall into three categories. First, oil resources are finite and there is increasing world dependence on a limited number of suppliers. Second, the world demographics are changing dramatically and the emerging industrialized nations will have greater supply needs. Third, increasing attention to the environmental impacts of energy production and use will limit supply options. In addition to this global view, some of the changes occurring in the US domestic energy picture have implications that will encourage energy efficiency and new technology development. The paper concludes that technological innovation has provided a great benefit in the past and can continue to do so in the future if it is both channels toward a sustainable energy future and if it is committed to, and invested in, as a deliberate long-term policy option.

Arvizu, D.E.; Drennen, T.E.

1997-03-01T23:59:59.000Z

370

Hybrid Sulfur Thermochemical Process Development Annual Report  

SciTech Connect (OSTI)

The Hybrid Sulfur (HyS) Thermochemical Process is a means of producing hydrogen via water-splitting through a combination of chemical reactions and electrochemistry. Energy is supplied to the system as high temperature heat (approximately 900 C) and electricity. Advanced nuclear reactors (Generation IV) or central solar receivers can be the source of the primary energy. Large-scale hydrogen production based on this process could be a major contributor to meeting the needs of a hydrogen economy. This project's objectives include optimization of the HyS process design, analysis of technical issues and concerns, creation of a development plan, and laboratory-scale proof-of-concept testing. The key component of the HyS Process is the SO2-depolarized electrolyzer (SDE). Studies were performed that showed that an electrolyzer operating in the range of 500-600 mV per cell can lead to an overall HyS cycle efficiency in excess of 50%, which is superior to all other currently proposed thermochemical cycles. Economic analysis indicated hydrogen production costs of approximately $1.60 per kilogram for a mature nuclear hydrogen production plant. However, in order to meet commercialization goals, the electrolyzer should be capable of operating at high current density, have a long operating lifetime , and have an acceptable capital cost. The use of proton-exchange-membrane (PEM) technology, which leverages work for the development of PEM fuel cells, was selected as the most promising route to meeting these goals. The major accomplishments of this project were the design and construction of a suitable electrolyzer test facility and the proof-of-concept testing of a PEM-based SDE.

Summers, William A.; Buckner, Melvin R.

2005-07-21T23:59:59.000Z

371

Developments in the integrated CPC  

SciTech Connect (OSTI)

The authors present a novel collector system using an evacuated nonimaging concentrator as a secondary for a circular primary mirror. The system was developed using a general design method that tailors the reflector shape to better match the input distribution of light reaching the secondary`s aperture. This technique, which uses a complimentary edge ray to simplify the geometrical formalism, recovers familiar designs for uniform input distributions, such as CPCs. The design and predicted performance of a novel two-state 2-d solar collector with a fixed circular primary mirror and nonimaging secondary are presented. This newly developed secondary gives a 25% improvement over conventional CPC secondaries. The technique may also be applied to stationary concentrators with variable load.

Winston, R.; Jenkins, D. [Univ. of Chicago, IL (United States)

1996-11-01T23:59:59.000Z

372

Flexible, secure agent development framework  

DOE Patents [OSTI]

While an agent generator is generating an intelligent agent, it can also evaluate the data processing platform on which it is executing, in order to assess a risk factor associated with operation of the agent generator on the data processing platform. The agent generator can retrieve from a location external to the data processing platform an open site that is configurable by the user, and load the open site into an agent substrate, thereby creating a development agent with code development capabilities. While an intelligent agent is executing a functional program on a data processing platform, it can also evaluate the data processing platform to assess a risk factor associated with performing the data processing function on the data processing platform.

Goldsmith; Steven Y. (Rochester, MN)

2009-04-07T23:59:59.000Z

373

Why Cogeneration Development Projects Fail  

E-Print Network [OSTI]

WHY CXXlENERATION DEVElDHmNT PROJECTS FAIL RALPH w. GRBBtMX>D Regional Manager Bbasco Services Incorporated Houston, Texas ABSTRACT Cogeneration projects that are organized by developers fail to reach fruition for reasons other than... the basic economical or technical sotmdness of the opportunity. Cogeneration developnent projects fail because of misunderstanding?by the host or other participants of their obligations, inadequate management support by the host organization, regulatory...

Greenwood, R. W.

374

CAS Alumni & Development Spring 2006  

E-Print Network [OSTI]

Understanding Cell Structure in the Doe Lab Four Stars Alumni Tech Talk Search Class Notes Online 1245://cas.uoregon.edu/alumnidev/cascade/2006spring/comix.html (1 of 6)6/19/2007 9:45:45 AM #12;CAS Alumni & Development "This was deep stuff of the Comparative Literature Reading Project. Spiegelman's work shows us that comics can be "a form capacious enough

Oregon, University of

375

Development of a maintenance program  

SciTech Connect (OSTI)

Bruce Nuclear Generating Station (NGS) A in Tiverton, Ontario, has been operating for 10 yr. One reason for its successful operating record is the development of an effective preventive maintenance program. Evaluation of the existing preventive program included a review of maintenance of selected key equipment over the life of the station. The review emphasized the need to improve the storage and sorting of maintenance information for trend and cost analysis, manpower planning, reliability, and radiation dose calculations.

Walker, I.

1987-01-01T23:59:59.000Z

376

Foinaven development - breaking the mould  

SciTech Connect (OSTI)

Foinaven Phase I, the first oil field development West of Shetland, had produced a new standard in the time required between discovery and development. The bedrock of this performance improvement stems from the clarity of hydrocarbon imaging available with new technology based on the 3D seismic data. Oil in the Foinaven field (discovered in late 1992) lies within Palaeocene reservoir sands interbedded with impermeable mudstones. Reservoir quality is excellent, although the sands are relatively thin, distributed over a large area, and are overlain by a gas cap. Prior to appraisal drilling, 3D seismic data were acquired over Foinaven as part of an extensive 2000 sq km survey shot in the summer of 1993. The conventional 3D seismic data have been inverted to produce an acoustic impedance (AI) dataset. Comparisons of predicted vs. actual hydrocarbon pore thickness during appraisal drilling using the AI data have shown a typical variance of +/- 10%. An horizontal appraisal well, was spudded in mid-1994. Once the target reservoir was entered, directional information from the MWD tool was used to steer the well along a desired path in real time to interact with specific targets. Once the hole had been cleaned, it was then completed using a pre-packed production liner. To further evaluate the reservoir, following an initial horizontal well drill-stem test, an extended well test, using a semi-submersible linked to a shuttle tanker was undertaken. Over 400,000 bbl oil were produced from the Foinaven reservoir. Foinaven Phase I will be developed by Petrojarl IV, a ship shaped Floating Production, Storage and Off loading (FPSO) facility, currently being rebuilt in Northern Spain. In conjunction with the FPSO horizontal production wells will be used with subsea completions and following processing the crude oil will be exported by shuttle tanker to the refinery. Development drilling started in November 1994. First oil is programmed for early 1996 at a plateau rate around 85 mbd.

Maclean, C. [BP exploration, Aberdeen (United Kingdom)

1995-08-01T23:59:59.000Z

377

Arctic Energy Technology Development Laboratory  

SciTech Connect (OSTI)

The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

2008-12-31T23:59:59.000Z

378

Report on Advanced Detector Development  

SciTech Connect (OSTI)

Neutron, gamma and charged particle detection improvements are key to supporting many of the foreseen measurements and systems envisioned in the R&D programs and the future fuel cycle requirements, such as basic nuclear physics and data, modeling and simulation, reactor instrumentation, criticality safety, materials management and safeguards. This task will focus on the developmental needs of the FCR&D experimental programs, such as elastic/inelastic scattering, total cross sections and fission neutron spectra measurements, and will leverage a number of existing neutron detector development efforts and programs, such as those at LANL, PNNL, INL, and IAC as well as those at many universities, some of whom are funded under NE grants and contracts. Novel materials and fabrication processes combined with state-of-the-art electronics and computing provide new opportunities for revolutionary detector systems that will be able to meet the high precision needs of the program. This work will be closely coordinated with the Nuclear Data Crosscut. The Advanced Detector Development effort is a broadly-focused activity that supports the development of improved nuclear data measurements and improved detection of nuclear reactions and reactor conditions. This work supports the design and construction of large-scale, multiple component detectors to provide nuclear reaction data of unprecedented quality and precision. Examples include the Time Projection Chamber (TPC) and the DANCE detector at LANL. This work also supports the fabrication and end-user application of novel scintillator materials detection and monitoring.

James K. Jewell

2012-09-01T23:59:59.000Z

379

Multi-Modality Phantom Development  

SciTech Connect (OSTI)

Multi-modality imaging has an increasing role in the diagnosis and treatment of a large number of diseases, particularly if both functional and anatomical information are acquired and accurately co-registered. Hence, there is a resulting need for multi modality phantoms in order to validate image co-registration and calibrate the imaging systems. We present our PET-ultrasound phantom development, including PET and ultrasound images of a simple prostate phantom. We use agar and gelatin mixed with a radioactive solution. We also present our development of custom multi-modality phantoms that are compatible with PET, transrectal ultrasound (TRUS), MRI and CT imaging. We describe both our selection of tissue mimicking materials and phantom construction procedures. These custom PET-TRUS-CT-MRI prostate phantoms use agargelatin radioactive mixtures with additional contrast agents and preservatives. We show multi-modality images of these custom prostate phantoms, as well as discuss phantom construction alternatives. Although we are currently focused on prostate imaging, this phantom development is applicable to many multi-modality imaging applications.

Huber, Jennifer S.; Peng, Qiyu; Moses, William W.

2009-03-20T23:59:59.000Z

380

Developing Government Renewable Energy Projects  

SciTech Connect (OSTI)

The US Army Corps of Engineers has retained Idaho National Laboratory (INL) to conduct a study of past INL experiences and complete a report that identifies the processes that are needed for the development of renewable energy projects on government properties. The INL has always maintained expertise in power systems and applied engineering and INL’s renewable energy experiences date back to the 1980’s when our engineers began performing US Air Force wind energy feasibility studies and development projects. Over the last 20+ years of working with Department of Defense and other government agencies to study, design, and build government renewable projects, INL has experienced the do’s and don’ts for being successful with a project. These compiled guidelines for government renewable energy projects could include wind, hydro, geothermal, solar, biomass, or a variety of hybrid systems; however, for the purpose of narrowing the focus of this report, wind projects are the main topic discussed throughout this report. It is our thought that a lot of what is discussed could be applied, possibly with some modifications, to other areas of renewable energy. It is also important to note that individual projects (regardless the type) vary to some degree depending on location, size, and need but in general these concepts and directions can be carried over to the majority of government renewable energy projects. This report focuses on the initial development that needs to occur for any project to be a successful government renewable energy project.

Kurt S. Myers; Thomas L. Baldwin; Jason W. Bush; Jake P. Gentle

2012-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Technology development life cycle processes.  

SciTech Connect (OSTI)

This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

Beck, David Franklin

2013-05-01T23:59:59.000Z

382

REDUCING SOFTWARE PRODUCT DEVELOPMENT TIME John Callahan  

E-Print Network [OSTI]

. Shortened product life cycles have meant that short development time is even more critical 3 . Short involvement early in the development cycle were found to lead to shorter development time. Also supported found that, during product concept development early in the development cycle, an overemphasis

Callahan, John

383

ADVANCED TURBINE SYSTEM CONCEPTUAL DESIGN AND PRODUCT DEVELOPMENT - Final Report  

SciTech Connect (OSTI)

Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricity costs to consumers and lowest emissions.

Albrecht H. Mayer

2000-07-15T23:59:59.000Z

384

Laboratory-directed research and development: FY 1996 progress report  

SciTech Connect (OSTI)

This report summarizes the FY 1996 goals and accomplishments of Laboratory-Directed Research and Development (LDRD) projects. It gives an overview of the LDRD program, summarizes work done on individual research projects, and provides an index to the projects` principal investigators. Projects are grouped by their LDRD component: Individual Projects, Competency Development, and Program Development. Within each component, they are further divided into nine technical disciplines: (1) materials science, (2) engineering and base technologies, (3) plasmas, fluids, and particle beams, (4) chemistry, (5) mathematics and computational sciences, (6) atomic and molecular physics, (7) geoscience, space science, and astrophysics, (8) nuclear and particle physics, and (9) biosciences.

Vigil, J.; Prono, J. [comps.

1997-05-01T23:59:59.000Z

385

Capabilities to Support Thermochemical Hydrogen Production Technology Development  

SciTech Connect (OSTI)

This report presents the results of a study to determine if Idaho National Laboratory (INL) has the skilled staff, instrumentation, specialized equipment, and facilities required to take on work in thermochemical research, development, and demonstration currently being performed by the Nuclear Hydrogen Initiative (NHI). This study outlines the beneficial collaborations between INL and other national laboratories, universities, and industries to strengthen INL's thermochemical efforts, which should be developed to achieve the goals of the NHI in the most expeditious, cost effective manner. Taking on this work supports INL's long-term strategy to maintain leadership in thermochemical cycle development. This report suggests a logical path forward to accomplish this transition.

Daniel M. Ginosar

2009-05-01T23:59:59.000Z

386

Developing ''SMART'' equipment and systems through collaborative NERI research and development  

SciTech Connect (OSTI)

The United States Department of Energy initiated the Nuclear Energy Research Initiative (NERI) to conduct research and development with the objectives of: (1) overcoming the principal technical obstacles to expanded nuclear energy use, (2) advancing the state of nuclear technology to maintain its competitive position in domestic and world markets, and (3) improving the performance, efficiency, reliability, and economics of nuclear energy. Fiscal Year 1999 program funding is $19 Million, with increased finding expected for subsequent years, emphasizing international cooperation. Among the programs selected for funding is the ``Smart Equipment and Systems to Improve Reliability and Safety in Future Nuclear Power Plant Operations''. This program is a 30 month collaborative effort bringing together the technical capabilities of ABB C-E Nuclear Power, Inc. (ABB CENP), Sandia National Laboratories, Duke Engineering and Services (DE and S), Massachusetts Institute of Technology (MIT) and Pennsylvania State University (PSU). The program's goal is to design, develop and evaluate an integrated set of smart equipment and predictive maintenance tools and methodologies that will significantly reduce nuclear plant construction, operation and maintenance costs. To accomplish this goal the Smart Equipment program will: (1) Identify and prioritize nuclear plant equipment that would most likely benefit from adding smart features; (2) Develop a methodology for systematically monitoring the health of individual pieces of equipment implemented with smart features (i.e. smart equipment); (3) Develop a methodology to provide plant operators with real-time information through smart equipment Man-Machine Interfaces (MMI) to support their decision making; (4) Demonstrate the methodology on a targeted component and/or system; (5) Expand the concept to system and plant levels that allow communication and integration of data among smart equipment. This paper will discuss (1) detailed subtask plans for the entire program, including expected achievements, (2) preliminary results from the early program phases and (3) the program's relationship to other NERI programs being conducted by the same team.

HARMON,DARYL L.; CHAPMAN,LEON D.; GOLAY,MICHAEL W.; MAYNARD,KENNETH P.; SPENCER,JOSEPH W.

2000-06-05T23:59:59.000Z

387

Information and Communication in Lean Product Development  

E-Print Network [OSTI]

In this thesis, the implications and influences that information and communication impose on lean product development in general, as well as the development of a lean Product Development Value Stream Display (lean PDVSD) ...

Graebsch, Martin

388

Sustainable Development: Case Studies & Lessons Learned  

E-Print Network [OSTI]

Sustainable Development: Case Studies & Lessons Learned Prepared For City of Rosemount UMore Development LLC PA 8081 Capstone: Sustainability Planning Humphrey School of Public Affairs University studies that analyze how local and national developments have either successfully implemented sustainable

Netoff, Theoden

389

Course Syllabus -Page 1 Sustainable Development  

E-Print Network [OSTI]

Course Syllabus - Page 1 Sustainable Development: Ethics, Physics and Technology Proposed Course 94720, USA Course Description Although sustainability and sustainable development have become common issue underlying sustainable development, change and its limits, from different perspectives: ethics

Hermanowicz, Slawomir W.

390

SUSTAINABLE A university for sustainable development  

E-Print Network [OSTI]

THE SUSTAINABLE UNIVERSITY #12;A university for sustainable development The University contribution to a sustainable future. By systematically integrating sustainable development into research. The University of Gothenburg's Vision 2020 confirms that sustainable development is important; we always consider

Johannesson, Henrik

391

Economic Development Incentive Programs: Some Best Practices  

E-Print Network [OSTI]

Economic Development Incentive Programs: Some Best Practices Judith I. Stallmann and Thomas G. Johnson Economic development incentives have been a popular tool for attracting, retaining and growing to expectations and promises made. The research literature on economic development incentives finds

Noble, James S.

392

Saskatchewan Instructional Development and Research Unit (SIDRU)  

E-Print Network [OSTI]

Saskatchewan Instructional Development and Research Unit (SIDRU) 25th ANNUAL REPORT 2009 2010 Saskatchewan Instructional Development & Research Unit Faculty of Education: SIDRU@uregina.ca #12; CONTENTS SASKATCHEWAN INSTRUCTIONAL DEVELOPMENT & RESEARCH UNIT

Argerami, Martin

393

Product Development Practices for Meeting Financial Objectives  

E-Print Network [OSTI]

This paper reports product development practices that separate the most successful product development programs from the rest. A detailed understanding of best product development practices is important because product ...

Makumbe, Pedzi

2009-10-31T23:59:59.000Z

394

APPALACHIAN COLLEGES COMMUNITY ECONOMIC DEVELOPMENT PARTNERSHIP  

E-Print Network [OSTI]

customized community economic development engagement strategies. · Provide on-site Partnership evaluation to undertake new economic development programs. Communication, Sustainability, and Evaluation--Years 1, 2 and 3APPALACHIAN COLLEGES COMMUNITY ECONOMIC DEVELOPMENT PARTNERSHIP The UNC-Chapel Hill Office

Engel, Jonathan

395

Trade Pattern and Economic Development when Endogenous  

E-Print Network [OSTI]

Trade Pattern and Economic Development when Endogenous and Exogenous Comparative Advantages Coexist Pattern and Economic Development when Endogenous and Exogenous Comparative Advantages Coexist Jeffrey disappears. Two types of dual structure may occur in the transitional stage of economic development

396

Information Visualization for Agile Software Development Teams  

E-Print Network [OSTI]

Information Visualization for Agile Software Development Teams Julia Paredes Department of Computer software development teams. The results of the systematic mapping show that Agile teams use visualization artifacts amongst team members. Keywords--Agile software development, information visualiza- tion, software

Maurer, Frank

397

Integrating agile practices into critical software development  

E-Print Network [OSTI]

Integrating agile practices into critical software development Katarzyna Lukasiewicz, Janusz GĂłrski. In this text we describe our research towards introducing agile practices into critical software development processes Keywords-- safety-critical software; agile practices; software development; process improvement

Boyer, Edmond

398

Photovoltaic technology development at Sandia National Laboratories  

SciTech Connect (OSTI)

This report describes the following investigations being pursued under photovoltaic technology development at Sandia National Laboratories: photovoltaic systems technology; concentrator technology; concentrator arrays and tracking structures; concentrator solar cell development; system engineering; subsystem development; and test and applications.

NONE

1981-12-31T23:59:59.000Z

399

Development of a Residential Integrated Ventilation Controller  

SciTech Connect (OSTI)

The goal of this study was to develop a Residential Integrated Ventilation Controller (RIVEC) to reduce the energy impact of required mechanical ventilation by 20percent, maintain or improve indoor air quality and provide demand response benefits. This represents potential energy savings of about 140 GWh of electricity and 83 million therms of natural gas as well as proportional peak savings in California. The RIVEC controller is intended to meet the 2008 Title 24 requirements for residential ventilation as well as taking into account the issues of outdoor conditions, other ventilation devices (including economizers), peak demand concerns and occupant preferences. The controller is designed to manage all the residential ventilation systems that are currently available. A key innovation in this controller is the ability to implement the concept of efficacy and intermittent ventilation which allows time shifting of ventilation. Using this approach ventilation can be shifted away from times of high cost or high outdoor pollution towards times when it is cheaper and more effective. Simulations, based on the ones used to develop the new residential ventilation requirements for the California Buildings Energy code, were used to further define the specific criteria and strategies needed for the controller. These simulations provide estimates of the energy, peak power and contaminant improvement possible for different California climates for the various ventilation systems. Results from a field test of the prototype controller corroborate the predicted performance.

Staff Scientist; Walker, Iain; Sherman, Max; Dickerhoff, Darryl

2011-12-01T23:59:59.000Z

400

Low-Cost Spectral Sensor Development Description.  

SciTech Connect (OSTI)

Solar spectral data for all parts of the US is limited due in part to the high cost of commercial spectrometers. Solar spectral information is necessary for accurate photovoltaic (PV) performance forecasting, especially for large utility-scale PV installations. A low-cost solar spectral sensor would address the obstacles and needs. In this report, a novel low-cost, discrete- band sensor device, comprised of five narrow-band sensors, is described. The hardware is comprised of commercial-off-the-shelf components to keep the cost low. Data processing algorithms were developed and are being refined for robustness. PV module short-circuit current ( I sc ) prediction methods were developed based on interaction-terms regression methodology and spectrum reconstruction methodology for computing I sc . The results suggest the computed spectrum using the reconstruction method agreed well with the measured spectrum from the wide-band spectrometer (RMS error of 38.2 W/m 2 -nm). Further analysis of computed I sc found a close correspondence of 0.05 A RMS error. The goal is for ubiquitous adoption of the low-cost spectral sensor in solar PV and other applications such as weather forecasting.

Armijo, Kenneth Miguel; Yellowhair, Julius

2014-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Recent Developments in DOE FUSRAP - 13014  

SciTech Connect (OSTI)

The DOE Office of Legacy Management assumed responsibility for the DOE FUSRAP in 2003. Since then, DOE has evaluated existing guidance and program needs to ensure that the program will remain effective in maintaining protectiveness at remediated FUSRAP sites. DOE has identified crucial elements that must be addressed to meet this goal. Knowledge of the sites and the program must be preserved and accessible to future custodians. Program processes must be defined and coordinated with other agencies. Long-term surveillance and maintenance (LTS and M) requirements for the sites must be based on human health risk and regulatory compliance, and those requirements must be well defined. Useful and accurate program information must be available to stakeholders. DOE has addressed these needs through development of a comprehensive program plan, an LTS and M plan for each completed FUSRAP site, a records finding aid, and a public information web site. These developments help ensure that the current knowledge is preserved and passed on to future custodians and stakeholders. (authors)

Clayton, Christopher [U.S. Department of Energy Office of Legacy Management, Washington, DC (United States)] [U.S. Department of Energy Office of Legacy Management, Washington, DC (United States); Kothari, Vijendra [U.S. Department of Energy Office of Legacy Management, Morgantown, West Virginia (United States)] [U.S. Department of Energy Office of Legacy Management, Morgantown, West Virginia (United States); Hooten, Gwen; Starr, Ken [U.S. Department of Energy Office of Legacy Management, Westminster, Colorado (United States)] [U.S. Department of Energy Office of Legacy Management, Westminster, Colorado (United States); Bahrke, Cheri; Gillespie, Joey; Widdop, Michael [Stoller LMS Team, Contractor for the U.S. Department of Energy Office of Legacy Management, Grand Junction, Colorado (United States)] [Stoller LMS Team, Contractor for the U.S. Department of Energy Office of Legacy Management, Grand Junction, Colorado (United States); Darr, Bob [S.M. Stoller Corporation, Contractor for the U.S. Department of Energy Office of Legacy Management, Westminster, Colorado (United States)] [S.M. Stoller Corporation, Contractor for the U.S. Department of Energy Office of Legacy Management, Westminster, Colorado (United States)

2013-07-01T23:59:59.000Z

402

Wind Development on Tribal Lands  

SciTech Connect (OSTI)

Background: The Rosebud Sioux Tribe (RST) is located in south central South Dakota near the Nebraska border. The nearest community of size is Valentine, Nebraska. The RST is a recipient of several Department of Energy grants, written by Distributed Generation Systems, Inc. (Disgen), for the purposes of assessing the feasibility of its wind resource and subsequently to fund the development of the project. Disgen, as the contracting entity to the RST for this project, has completed all the pre-construction activities, with the exception of the power purchase agreement and interconnection agreement, to commence financing and construction of the project. The focus of this financing is to maximize the economic benefits to the RST while achieving commercially reasonable rates of return and fees for the other parties involved. Each of the development activities required and its status is discussed below. Land Resource: The Owl Feather War Bonnet 30 MW Wind Project is located on RST Tribal Trust Land of approximately 680 acres adjacent to the community of St. Francis, South Dakota. The RST Tribal Council has voted on several occasions for the development of this land for wind energy purposes, as has the District of St. Francis. Actual footprint of wind farm will be approx. 50 acres. Wind Resource Assessment: The wind data has been collected from the site since May 1, 2001 and continues to be collected and analyzed. The latest projections indicate a net capacity factor of 42% at a hub height of 80 meters. The data has been collected utilizing an NRG 9300 Data logger System with instrumentation installed at 30, 40 and 65 meters on an existing KINI radio tower. The long-term annual average wind speed at 65-meters above ground level is 18.2 mph (8.1 mps) and 18.7 mph (8.4 mps) at 80-meters agl. The wind resource is excellent and supports project financing.

Ken Haukaas; Dale Osborn; Belvin Pete

2008-01-18T23:59:59.000Z

403

Data mining for ontology development.  

SciTech Connect (OSTI)

A multi-laboratory ontology construction effort during the summer and fall of 2009 prototyped an ontology for counterfeit semiconductor manufacturing. This effort included an ontology development team and an ontology validation methods team. Here the third team of the Ontology Project, the Data Analysis (DA) team reports on their approaches, the tools they used, and results for mining literature for terminology pertinent to counterfeit semiconductor manufacturing. A discussion of the value of ontology-based analysis is presented, with insights drawn from other ontology-based methods regularly used in the analysis of genomic experiments. Finally, suggestions for future work are offered.

Davidson, George S.; Strasburg, Jana (Pacific Northwest National Laboratory, Richland, WA); Stampf, David (Brookhaven National Laboratory, Upton, NY); Neymotin,Lev (Brookhaven National Laboratory, Upton, NY); Czajkowski, Carl (Brookhaven National Laboratory, Upton, NY); Shine, Eugene (Savannah River National Laboratory, Aiken, SC); Bollinger, James (Savannah River National Laboratory, Aiken, SC); Ghosh, Vinita (Brookhaven National Laboratory, Upton, NY); Sorokine, Alexandre (Oak Ridge National Laboratory, Oak Ridge, TN); Ferrell, Regina (Oak Ridge National Laboratory, Oak Ridge, TN); Ward, Richard (Oak Ridge National Laboratory, Oak Ridge, TN); Schoenwald, David Alan

2010-06-01T23:59:59.000Z

404

Geothermal development plan: northern Arizona  

SciTech Connect (OSTI)

Much of the northern counties (Apache, Coconino, Gila, Mohave, Navajo and Yavapai) is located in the Colorado Plateau province, a region of low geothermal potential. Two areas that do show some potential are the Flagstaff - San Francisco Peaks area and the Springerville area. Flagstaff is rapidly becoming the manufacturing center of Arizona and will have many opportunities to use geothermal energy to satisfy part of its increasing need for energy. Using a computer simulation model, projections of geothermal energy on line as a function of time are made for both private and city-owned utility development of a resource.

White, D.H.; Goldstone, L.A.

1981-01-01T23:59:59.000Z

405

Electric utility research and development  

SciTech Connect (OSTI)

Nineteen papers presented at a seminar held by the National Association of Regulatory Utility Commissioners (NARUC) at North Carolina State University during October, 1982 represent an opportunity for an exchange of research information among regulators, utility officials, and research planners. The topics range from a regulatory perspective of research and development to a review of new and evolving technologies. Separate abstracts were prepared for each of the papers for the Energy Data Base (EDB), Energy Research Abstracts (ERA), and Energy Abstracts for Policy Analysis.

Not Available

1982-10-25T23:59:59.000Z

406

Common Rail Injection System Development  

SciTech Connect (OSTI)

The collaborative research program between the Department of energy and Electro-Motive Diesels, Inc. on the development of common rail fuel injection system for locomotive diesel engines that can meet US EPA Tier 2 exhaust emissions has been completed. This final report summarizes the objectives of the program, work scope, key accomplishments and research findings. The major objectives of this project encompassed identification of appropriate injection strategies by using advanced analytical tools, development of required prototype hardware/controls, investigations of fuel spray characteristics including cavitation phenomena, and validation of hareware using a single-cylinder research locomotive diesel engine. Major milestones included: (1) a detailed modeling study using advanced mathematical models - several various injection profiles that show simultaneous reduction of NOx and particulates on a four stroke-cycle locomotive diesel engine were identified; (2) development of new common rail fuel injection hardware capable of providing these injection profiles while meeting EMD engine and injection performance specifications. This hardware was developed together with EMD's current fuel injection component supplier. (3) Analysis of fuel spray characteristics. Fuel spray numerical studies and high speed photographic imaging analyses were performed. (4) Validation of new hardware and fuel injection profiles. EMD's single-cylinder research diesel engine located at Argonne National Laboratory was used to confirm emissions and performacne predictions. These analytical ane experimental investigations resulted in optimized fuel injection profiles and engine operating conditions that yield reductions in NOx emissions from 7.8 g/bhp-hr to 5.0 g/bhp-hr at full (rated) load. Additionally, hydrocarbon and particulate emissions were reduced considerably when compared to baseline Tier I levels. The most significant finding from the injection optimization process was a 2% to 3% improvement in fuel economy over EMD's traditional Tier I engine hardware configuration. the common rail fuel injection system enabled this added benefit by virtue of an inherent capability to provide multiple injections per power stroke at high fuel rail pressures. On the basis of the findings in this study, EMD concludes that the new electronically-controlled high-pressure common rail injection system has the potential to meet locomotive Tier 2 NOx and particulates emission standards without sacrificing the fuel economy. A number of areas to further improve the injection hardware and engine operating characteristics to further exploit the benefits of common rail injection system have also been identified.

Electro-Motive,

2005-12-30T23:59:59.000Z

407

ADVANCED HOT GAS FILTER DEVELOPMENT  

SciTech Connect (OSTI)

Iron aluminide hot gas filters have been developed using powder metallurgy techniques to form seamless cylinders. Three alloys were short-term corrosion tested in simulated IGCC atmospheres with temperatures between 925 F and 1200 F with hydrogen sulfide concentrations ranging from 783 ppm{sub v} to 78,300 ppm{sub v}. Long-term testing was conducted for 1500 hours at 925 F with 78,300 ppm{sub v}. The FAS and FAL alloys were found to be corrosion resistant in the simulated environments. The FAS alloy has been commercialized.

Matthew R. June; John L. Hurley; Mark W. Johnson

1999-04-01T23:59:59.000Z

408

Energy Research, Development and Demonstration  

E-Print Network [OSTI]

80-L-l i I Study of low Btu fixed-bed gasification of li~nite pellets. SPI NUMBER 80-L-2 Research and/or development of advattced technologies for the use of lignite as an industrial fU~l. SPI NUMBER 80-L-3 I Demonstration of advanced... Nelson, (July, 1979, EDF-017 Demonstration of Solar Ener Conversion of A ricultural or Industrial Wastes of Fuels, Dow Chemical Co., May, 1979, Project #B-0-2 EDF-018 Alternative Energy Sources for Agricultural Applications Including Gasification...

Ray, R. R., Jr.

1980-01-01T23:59:59.000Z

409

Development of MP3 Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density,TiO2(110).Development of

410

Laboratory Directed Research and Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LOSEngineering& Development Page

411

Singapore approaches next development phase  

SciTech Connect (OSTI)

Singapore is pinning its hopes on Jurong Island for maintaining its status as a world-class petrochemical hub. Because of a scarcity of industrial land, the Singapore government has initiated a land reclamation program to create Jurong Island as a base for industrial development. The aim is to attract overseas petrochemical companies with the promise of being able to channel their investments into an area where the proximity of other production units, plus services and utility providers, make for a totally integrated manufacturing complex. Plants will range from refineries to specialty chemicals.

Singh, B.

1997-02-19T23:59:59.000Z

412

Braze alloy development for zircaloy  

SciTech Connect (OSTI)

The purpose of this study was to find a suitable braze alloy to close the ends of a new fuel design for N Reactor, the defense reactor at the Hanford site, Washington. An alloy composed of Zircaloy-2 + 8 wt % chromium + 8 wt % nickel (Zr2-8Cr-8Ni) was successfully used to obtain an acceptable joint with no voids. Suggestions for future work on end closure development for the new fuel are outlined. This alloy has potential use in any Zircaloy joining applications. 3 refs., 9 figs., 3 tabs.

Donovan, A.H.

1988-05-01T23:59:59.000Z

413

Developing an Army Doctrine Publication  

E-Print Network [OSTI]

Psychology 59(5): 952-959. Lind, E. Allan, and Tyler, Tom R. 1988. The social psychology of procedural justice. New York, NY: Springer. Luecke, Richard. A., and Patterson, James G. 2008. How to become a better negotiator. 2nd ed. New York, NY: AMACOM... (e.g., “the influence Soldiers exert”) and not applicable to the development of a doctrinal techniques publication. ADP 3-0, Unified Land Operations, outlines how the Army supports and contributes to unified action, defined as “the synchronization...

Price, Judith M.R.

2013-05-17T23:59:59.000Z

414

Cookstoves for the developing world  

SciTech Connect (OSTI)

Traditional wood, charcoal and coal stoves are used in hundreds of millions of homes. Their design can have a dramatic effcect on energy usage, the environment and community health. Over the past decade government programs, development assistance groups and community-based organizers have undertaken a thorough review of the requirements for successful dissemination of cookstove technology. A new generation of stove programs is now implementing these hard-won lessons. This effort encompasses everything from an examination of stove thermodynamics and materials science to market research and grass-roots educational campaigns. This paper looks at cookstoves in Kenya and programms in China and India. 3 refs.

Kammen, D.M. [Princeton Univ., NJ (United States)

1995-07-01T23:59:59.000Z

415

Developing Substitutes | Critical Materials Institute  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps Develop Next-Gen Batteries

416

Developing better biomass feedstock | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps Develop Next-Gen

417

Development Shop | The Ames Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSC Helps Develop Next-GenEMSL Research

418

Development Administration By Alice Buck  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle Batteryof Energy Developing a New Primer Energy

419

Economic Development | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It is the mission ofEconomic Development

420

Developer | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (The following text09-0018-CXBasinDeseret GenerationHomeDeveloper

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NOxsensor development | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOEToward aInnovation |NEXTDevelopmentNOxsensor development

422

What Makes Development Sustainable? Case Studies of Health and Human Development Programs in Community Context  

E-Print Network [OSTI]

of Institutions. ” Making Development Sustainable: Rede?ningIs to Be Done? ” Making Development Sustainable: RedefiningManagement and Sustainable Development. ” Ambio 18.2 (1989):

Saha, Somava

1996-01-01T23:59:59.000Z

423

What Makes Development Sustainable? Case Studies of Health and Human Development Programs in Community Context  

E-Print Network [OSTI]

Management and Sustainable Development. ” Ambio 18.2 (1989):Sandbrook, Richard. ”Sustainable Development: What Is to Be3. Redclift, Michael. Sustainable Development: Exploring the

Saha, Somava

1996-01-01T23:59:59.000Z

424

Integrated Coastal Resource Management: A Prescription for Sustainable Development  

E-Print Network [OSTI]

1996). Sustainable Development Sustainable developmentNations' role in sustainable development. In C. Thomas (protection and sustainable development. Another positive

English, Brian J.

2003-01-01T23:59:59.000Z

425

Tribal Renewable Energy Advanced Course: Project Development...  

Broader source: Energy.gov (indexed) [DOE]

Development and Financing Essentials Tribal Renewable Energy Advanced Course: Project Development and Financing Essentials Watch the DOE Office of Indian Energy advanced course...

426

Tanzania Traditional Energy Development and Environment Organization...  

Open Energy Info (EERE)

Traditional Energy Development and Environment Organization (TaTEDO) Jump to: navigation, search Name: Tanzania Traditional Energy Development and Environment Organization (TaTEDO)...

427

Alternative Energy Development and China's Energy Future  

E-Print Network [OSTI]

for Geothermal Power Development energy development. Geothermal Power Technology OverviewChina, the binary cycle geothermal power plant is assumed to

Zheng, Nina

2012-01-01T23:59:59.000Z

428

Environmental Impacts of Increased Hydroelectric Development...  

Broader source: Energy.gov (indexed) [DOE]

Impacts of Increased Hydroelectric Development at Existing Dams Environmental Impacts of Increased Hydroelectric Development at Existing Dams This report describes the...

429

Virginia Offshore Wind Development Authority (Virginia)  

Broader source: Energy.gov [DOE]

The Virginia Offshore Wind Development Authority is a public body, established for the purposes of facilitating, coordinating, and supporting the development, either by the Authority or by other...

430

Testimony Before Senate Energy & Water Development Committee...  

Energy Savers [EERE]

Reports Testimony Testimony Before Senate Energy & Water Development Committee Testimony Before Senate Energy & Water Development Committee March 21, 2012 Fiscal Year 2013...

431

Research & Development Roadmap: Emerging Water Heating Technologies...  

Energy Savers [EERE]

Emerging Water Heating Technologies Research & Development Roadmap: Emerging Water Heating Technologies The Research and Development (R&D) Roadmap for Emerging Water Heating...

432

Water Heating Technologies Research and Development Roadmap ...  

Energy Savers [EERE]

Water Heating Technologies Research and Development Roadmap Water Heating Technologies Research and Development Roadmap This roadmap establishes a set of high-priority RD&D...

433

Transcript: Biomass Clean Cities Webinar - Workforce Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Transcript: Biomass Clean Cities Webinar - Workforce Development Transcript: Biomass Clean Cities Webinar - Workforce Development Transcript of the BiomassClean Cities Workforce...

434

Sustainable Development: Physical and Moral Issues  

E-Print Network [OSTI]

Sustainable Development: Physical and Moral Issues Slav W.e-mail: hermanowicz@ce.berkeley.edu Sustainable developmentaims and objectives of sustainable development are right and

Hermanowicz, S W

2006-01-01T23:59:59.000Z

435

Sandia National Laboratories: Integrated Research and Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ClimateEnergy InfrastructureAdvanced Electric SystemsIntegrated Research and Development Integrated Research and Development Sandia's Renewable Systems and Energy Infrastructure...

436

Site Location of Development Act (Maine)  

Broader source: Energy.gov [DOE]

The Site Location of Development Act regulates the locations chosen for state, municipal, quasi-municipal, educational, charitable, commercial and industrial developments with respect to the...

437

Development of Thermoelectric Technology for Automotive Waste...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Thermoelectric Technology for Automotive Waste Heat Recovery Development of Thermoelectric Technology for Automotive Waste Heat Recovery Overview and status of project to develop...

438

Leadership Development Resource Center (LDRC) | Department of...  

Broader source: Energy.gov (indexed) [DOE]

DOE's mission by progressing in all phases of leadership development. DOE Leadership Philosophy Several themes describe the state of leadership development today: A growing...

439

SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP...  

Office of Environmental Management (EM)

SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Evaluation of Formal Training SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Evaluation of Formal...

440

Revolving Economic Development and Initiative (South Dakota)  

Broader source: Energy.gov [DOE]

The Revolving Economic Development and Initiative (REDI) provides low interest loans to start-up firms, businesses that are expanding or relocating and local economic development corporations. The...

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Advanced Engine Development | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Engine Development High-performance computing accelerates advanced engine development July 11, 2014 Oak Ridge National Laboratory's (ORNL's) Dean Edwards and a...

442

Workforce and Economic Development | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Workforce and Economic Development Workforce and Economic Development Slides presented in the "What's Working in Residential Energy Efficiency Upgrade Programs Conference -...

443

Virginia Coalfield Economic Development Authority (Virginia)  

Broader source: Energy.gov [DOE]

The Virginia Coalfield Economic Development Authority (VACEDA) was created in 1988 to encourage economic development in the western section of the state. The Authority administers incentive and...

444

Fuel Cycle Research and Development Program  

Office of Environmental Management (EM)

29, 2009 Fuel Cycle Research and Development DM 195665 5 Identify the governing phenomenology Identify the governing phenomenology Develop a first-principle based model of the...

445

Sandia Researchers Develop Promising Chemical Technology for...  

Energy Savers [EERE]

Sandia Researchers Develop Promising Chemical Technology for Energy Storage Sandia Researchers Develop Promising Chemical Technology for Energy Storage March 7, 2012 - 9:50am...

446

Human Rights and Sustainable Development Law.  

E-Print Network [OSTI]

?? This paper considers the fast changing developments and changes in relation to sustainable development law with its three pillars, and the needs of international… (more)

Mekonin, Abere

2010-01-01T23:59:59.000Z

447

Enforcement Letter, Parsons Technology Development & Fabrication...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Technology Development & Fabrication Complex - April 13, 2010 Enforcement Letter, Parsons Technology Development & Fabrication Complex - April 13, 2010 April 13, 2010 Issued to...

448

Legislative Developments in Solar Energy during 1980  

E-Print Network [OSTI]

is apparent that many solar and energy conservation programsL. REP. 267 (1979). SOLAR ENERGY DEVELOPMENTS kilowattsto -103 (Supp. 1979). SOLAR ENERGY DEVELOPMENTS vegetation

Krueger, Robert B.; Hoffman, Peter C.

1981-01-01T23:59:59.000Z

449

Senior Executive Service Candidate Development Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Program Senior Executive Service Candidate Development Program The Office of Learning and Workforce Development coordinates applications for all DOE Federal Employees. Overview The...

450

Advanced Diesel Engine and Aftertreatment Technology Development...  

Broader source: Energy.gov (indexed) [DOE]

Improvement DEER August 24 - 28, 2003 3 System Development Methodology Control model Engine model Simulation Urea Injector SCR Catalyst CSF Steady State Modal Development...

451

Advanced Diesel Engine and Aftertreatment Technology Development...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Diesel Engine and Aftertreatment Technology Development for Tier 2 Emissions Advanced Diesel Engine and Aftertreatment Technology Development for Tier 2 Emissions 2003...

452

Hydrogen Fuel Quality - Focus: Analytical Methods Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results Hydrogen Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results...

453

Nationwide: Southeast Propane Autogas Development Program Brings...  

Energy Savers [EERE]

Nationwide: Southeast Propane Autogas Development Program Brings 1200 Propane Vehicles to the Road Nationwide: Southeast Propane Autogas Development Program Brings 1200 Propane...

454

Cogeneration Development and Market Potential in China  

E-Print Network [OSTI]

China's Power Industry," Cogeneration Technolo- gy, V o l .tion Development," Cogeneration Technol- ogy, V o l . 41, NE Y NATIONAL LABORATORY Cogeneration Development and Market

Yang, F.

2010-01-01T23:59:59.000Z

455

Development of Updated ABsorption SIMulation Software (ABSIM)  

SciTech Connect (OSTI)

ABsorption SIMulation, ABSIM, was developed for the simulation of absorption systems by The Oak Ridge National Laboratory during 1980s and 1990s. ABSIM provides a platform for users to investigate various cycle configurations and working fluids, to calculate their operating parameters, to predict their performance, and to compare them with each other on a uniform basis. ABSIM is indeed a very useful and accurate tool for researchers to investigate various absorption systems. However, it has not been well maintained: it is incompatible with recent operating systems; the interface needs improved user-friendliness, and the system needs better parameter setting and debugging tools to help achieve convergence. Therefore, it is highly needed to update and improve ABSIM. The paper presents recent efforts to improve ABSIM s compatibility with current operating systems, user interface, and analysis capabilities. The paper details the features and functions of the newly updated ABSIM software. The new ABSIM still uses the previously validated calculation engine of the old ABSIM. The new graphic user interfaces (GUI) were developed in Qt, which is an open source license GUI software based on C++. XML was used as the database for data storage in the new ABSIM. The new ABSIM has been designed to be easily learned and used. It has enhanced editing and construction functions, plus enhanced analysis features including parametric tables, plotting, property plots, and master panels for debugging. A single effect water/LiBr absorption system is used as a case study in this paper to illustrate the features, capabilities, and functions of the new ABSIM. This case study was actually an example system available in the old ABSIM. The new version of ABSIM will be continuously developed to include additional subroutines for the components in liquid desiccant systems. The new ABSIM will be available to public for free. The ultimate goal of the new ABSIM is to allow it to become a simulation platform for both absorption heat pump and liquid desiccant systems.

Yang, Zhiyao [Purdue University, West Lafayette, IN; Tang, Xin [Purdue University, West Lafayette, IN; Qu, Ming [Purdue University, West Lafayette, IN; Abdelaziz, Omar [ORNL; Gluesenkamp, Kyle R [ORNL

2014-01-01T23:59:59.000Z

456

Geothermal drilling and completion technology development program. Quarterly progress report, January-March 1980  

SciTech Connect (OSTI)

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

Varnado, S.G. (ed.)

1980-04-01T23:59:59.000Z

457

Geothermal drilling and completion technology development program. Annual progress report, October 1979-September 1980  

SciTech Connect (OSTI)

The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

Varnado, S.G. (ed.)

1980-11-01T23:59:59.000Z

458

Geothermal drilling and completion technology development program. Quarterly progress report, October-December 1979  

SciTech Connect (OSTI)

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.

Varnado, S.G. (ed.)

1980-01-01T23:59:59.000Z

459

Geothermal drilling and completion technology development program. Quarterly progress report, April-June 1980  

SciTech Connect (OSTI)

The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are reported. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

Varnado, S.G.

1980-07-01T23:59:59.000Z

460

Geothermal drilling ad completion technology development program. Semi-annual progress report, April-September 1979  

SciTech Connect (OSTI)

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.

Varnado, S.G. (ed.)

1980-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Avian issues in wind development  

SciTech Connect (OSTI)

There is a lot of concern among wind supporters, I know, about Audubon`s position on wind power. There is concern that this is the wrong time to be critical, and the wrong time to be putting any doubts in investors` minds, and the wrong time to provide an excuse for utilities to stop buying windpower. The long-term future of biodiversity, including bird diversity, depends on development of renewable energy, and that will mean some wind development in the right places and with the right types of systems. For both the long-time survival of the wind industry and for protection of bird populations, Audubon cannot be quiet on this issue. To avoid mistakes that can kill the industry in the long run, expenditures for wind/avian research have to be increased way beyond their present scope. We are going to need about $5 million dollars per year, if we are to (1) understand the biology and physics of bird-wind plant interactions, (2) if we are to understand relevant bird flightpaths, and (3) if we are to design a strategy to protect bird populations.

Beyea, J. [National Audubon Society, New York, NY (United States)

1995-12-31T23:59:59.000Z

462

Safety critical software development qualification  

SciTech Connect (OSTI)

With the increasing use of digital systems in control applications, customers must acquire appropriate expectations for software development and quality assurance procedures. Purchasers and users of digital systems need to understand the benefits to the supplier of effective quality systems. These systems consist not only of procedures but tools that enable automation. Without the use of automation, quality can not be assured. A software and systems quality program starts with the documents you are very familiar with. But these documents must define more than the final system. They must address specific development environment characteristics and testing capabilities. Starting with the RFP, some of the items that should be introduced are Software Configuration Management, regression testing and defect tracking. The digital system customer is in the best position to enforce the use of software and systems quality programs by including them in project requirements as early as the Purchase Order. The customer's understanding of the full scope and implementation of a software quality program is essential to achieving the quality necessary in nuclear projects, and, incidentally, completing those projects on schedule. (authors)

Marron, J. E. [Invensys Process Systems, 33 Commercial Street, Foxboro, MA 02035 (United States)

2006-07-01T23:59:59.000Z

463

AGING SYSTEM DESIGN DEVELOPMENT STRATEGY  

SciTech Connect (OSTI)

This plan provides an overview, work to date, and the path forward for the design development strategy of the Aging cask for aging commercial spent nuclear fuel (CSNF) at the Yucca Mountain Project (YMP) repository site. Waste for subsurface emplacement at the repository includes US Department of Energy (DOE) high-level radioactive waste (HLW), DOE SNF, commercial fuel in dual-purpose canisters (DPCs), uncanistered bare fuel, naval fuel, and other waste types. Table 1-1 lists the types of radioactive materials that may be aged at YMP, and those materials that will not be placed in an aging cask or module. This plan presents the strategy for design development of the Aging system. The Aging system will not handle naval fuel, DOE HLW, MCOs, or DOE SNF since those materials will be delivered to the repository in a state and sequence that allows them to be placed into waste packages for emplacement. Some CSNF from nuclear reactors, especially CSNF that is thermally too hot for emplacement underground, will need to be aged at the repository.

J. Beesley

2005-02-07T23:59:59.000Z

464

Great Plains Wind Energy Transmission Development Project  

SciTech Connect (OSTI)

In fiscal year 2005, the Energy & Environmental Research Center (EERC) received funding from the U.S. Department of Energy (DOE) to undertake a broad array of tasks to either directly or indirectly address the barriers that faced much of the Great Plains states and their efforts to produce and transmit wind energy at the time. This program, entitled Great Plains Wind Energy Transmission Development Project, was focused on the central goal of stimulating wind energy development through expansion of new transmission capacity or development of new wind energy capacity through alternative market development. The original task structure was as follows: Task 1 - Regional Renewable Credit Tracking System (later rescoped to Small Wind Turbine Training Center); Task 2 - Multistate Transmission Collaborative; Task 3 - Wind Energy Forecasting System; and Task 4 - Analysis of the Long-Term Role of Hydrogen in the Region. As carried out, Task 1 involved the creation of the Small Wind Turbine Training Center (SWTTC). The SWTTC, located Grand Forks, North Dakota, consists of a single wind turbine, the Endurance S-250, on a 105-foot tilt-up guyed tower. The S-250 is connected to the electrical grid on the 'load side' of the electric meter, and the power produced by the wind turbine is consumed locally on the property. Establishment of the SWTTC will allow EERC personnel to provide educational opportunities to a wide range of participants, including grade school through college-level students and the general public. In addition, the facility will allow the EERC to provide technical training workshops related to the installation, operation, and maintenance of small wind turbines. In addition, under Task 1, the EERC hosted two small wind turbine workshops on May 18, 2010, and March 8, 2011, at the EERC in Grand Forks, North Dakota. Task 2 involved the EERC cosponsoring and aiding in the planning of three transmission workshops in the midwest and western regions. Under Task 3, the EERC, in collaboration with Meridian Environmental Services, developed and demonstrated the efficacy of a wind energy forecasting system for use in scheduling energy output from wind farms for a regional electrical generation and transmission utility. With the increased interest at the time of project award in the production of hydrogen as a critical future energy source, many viewed hydrogen produced from wind-generated electricity as an attractive option. In addition, many of the hydrogen production-related concepts involve utilization of energy resources without the need for additional electrical transmission. For this reason, under Task 4, the EERC provided a summary of end uses for hydrogen in the region and focused on one end product in particular (fertilizer), including several process options and related economic analyses.

Brad G. Stevens, P.E.; Troy K. Simonsen; Kerryanne M. Leroux

2012-06-09T23:59:59.000Z

465

Develop an Institutional Change Action Plan for Sustainability  

Broader source: Energy.gov [DOE]

After establishing a goal and assessing the rules, roles, and tools, Federal agencies can develop an action plan (select the strategies that will be implemented over time to achieve and maintain energy and sustainability goals). This action plan should target specific audiences with tailored strategies and take into account the need to review and revise strategies in the long-term. The action plan must include appropriate metrics and regular measurement. Remember that planning useful efficiency and sustainability evaluation is necessary before an organization begins to implement an action plan.

466

Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments (Brochure)  

SciTech Connect (OSTI)

Fact sheet describes the top accomplishments, goals and strategies of DOEs Advanced Combustion Engine Research and Development sub program.

Not Available

2009-03-01T23:59:59.000Z

467

Development of a process for continuous creation of lean value in product development organizations  

E-Print Network [OSTI]

Ideas and methodologies of lean product development were developed into tools and processes that help product development organizations improve their performances. The definition of waste in product development processes ...

Kato, Jin

2005-01-01T23:59:59.000Z

468

Sustainable Development Student Intern Report 2013-2014 Sustainable Development Student Intern  

E-Print Network [OSTI]

Sustainable Development Student Intern Report 2013-2014 Sustainable Development Student Intern demonstrated its commitment to sustainable development through supporting student and university projects to sustainable development concentrated their efforts in both the campus and the Lennoxville community. Student

469

Summary of Booster Development and Qualification Report  

SciTech Connect (OSTI)

This report outlines booster development work done at Los Alamos National Laboratory from 2007 to present. The booster is a critical link in the initiation train of explosive assemblies, from complex devices like nuclear weapons to conventional munitions. The booster bridges the gap from a small, relatively sensitive detonator to an insensitive, but massive, main charge. The movement throughout the explosives development community is to use more and more insensitive explosive components. With that, more energy is needed out of the booster. It has to initiate reliably, promptly, powerfully and safely. This report is divided into four sections. The first provides a summary of a collaborative effort between LANL, LLNL, and AWE to identify candidate materials and uniformly develop a testing plan for new boosters. Important parameters and the tests required to measure them were defined. The nature of the collaboration and the specific goals of the participating partners has changed over time, but the booster development plan stands on its own merit as a complete description of the test protocol necessary to compare and qualify booster materials, and is discussed in its entirety in this report. The second section describes a project, which began in 2009 with the Department of Defense to develop replacement booster formulations for PBXN-7. Replacement of PBXN-7 was necessary because it contained Triaminotrinitrobenzene (TATB), which was becoming unavailable to the DoD and because it contained Cyclotrimethylenetrinitramine (RDX), which was sensitive and toxic. A LANL-developed explosive, Diaminoazoxyfurazan (DAAF), was an important candidate. This project required any replacement formulation be a drop-in replacement in existing munitions. This project was timely, in that it made use of the collaborative booster development project, and had the additional constraint of matching shock sensitivity. Additionally it needed to be a safety improvement, and a performance improvement, especially at cold temperatures. The requirements of this project necessitated novel test development and a different approach to ranking booster qualities. Results of this project have been documented to the DoD and the relevant portions are included within. The third section of this booster report outlines testing related to main charge initiation merit. Initiability can be evaluated by looking at critical diameter, run distance, and shock sensitivity. Once a booster is initiated, it needs to be powerful enough to initiate the main charge symmetrically and evenly. Main charge initiability is evaluated directly by observing detonation wave symmetry, curvature, and first break out over the surface of a charge. Furthermore it must be insensitive to accidents and insults, and safe and reliable across a range of temperatures. These effects, tests, and results will be discussed individually in the context of DAAF and other explosives similarly tested. The last section provides a conclusion and summary of our experimental work and recommendations for the path forward. References and additional supporting documentation and results are provided in the appendices at the end of this report.

Francois, Elizabeth G. [Los Alamos National Laboratory; Harry, Herbert H. [Los Alamos National Laboratory; Hartline, Ernest L. [Los Alamos National Laboratory; Hooks, Daniel E. [Los Alamos National Laboratory; Johnson, Carl E. [Los Alamos National Laboratory; Morris, John S. [Los Alamos National Laboratory; Novak, Alan M. [Los Alamos National Laboratory; Ramos, Kyle J. [Los Alamos National Laboratory; Sanders, Victor E. [Los Alamos National Laboratory; Scovel, Christina A. [Los Alamos National Laboratory; Lorenz, Thomas [LLNL; Wright, Mark [AWE; Botcher, Tod [PANTEX; Marx, Erin [NSWC-IHDIV; Gibson, Kevin [NSWC-IHDIV

2012-06-21T23:59:59.000Z

470

Development of alkaline fuel cells.  

SciTech Connect (OSTI)

This project focuses on the development and demonstration of anion exchange membrane (AEM) fuel cells for portable power applications. Novel polymeric anion exchange membranes and ionomers with high chemical stabilities were prepared characterized by researchers at Sandia National Laboratories. Durable, non-precious metal catalysts were prepared by Dr. Plamen Atanassov's research group at the University of New Mexico by utilizing an aerosol-based process to prepare templated nano-structures. Dr. Andy Herring's group at the Colorado School of Mines combined all of these materials to fabricate and test membrane electrode assemblies for single cell testing in a methanol-fueled alkaline system. The highest power density achieved in this study was 54 mW/cm2 which was 90% of the project target and the highest reported power density for a direct methanol alkaline fuel cell.

Hibbs, Michael R.; Jenkins, Janelle E.; Alam, Todd Michael; Janarthanan, Rajeswari [Colorado School of Mines, Golden, CO; Horan, James L. [Colorado School of Mines, Golden, CO; Caire, Benjamin R. [Colorado School of Mines, Golden, CO; Ziegler, Zachary C. [Colorado School of Mines, Golden, CO; Herring, Andrew M. [Colorado School of Mines, Golden, CO; Yang, Yuan [Colorado School of Mines, Golden, CO; Zuo, Xiaobing [Argonne National Laboratory, Argonne, IL; Robson, Michael H. [University of New Mexico, Albuquerque, NM; Artyushkova, Kateryna [University of New Mexico, Albuquerque, NM; Patterson, Wendy [University of New Mexico, Albuquerque, NM; Atanassov, Plamen Borissov [University of New Mexico, Albuquerque, NM

2013-09-01T23:59:59.000Z

471

Accelerated leach test development program  

SciTech Connect (OSTI)

In FY 1989, a draft accelerated leach test for solidified waste was written. Combined test conditions that accelerate leaching were validated through experimental and modeling efforts. A computer program was developed that calculates test results and models leaching mechanisms. This program allows the user to determine if diffusion controls leaching and, if this is the case, to make projections of releases. Leaching mechanisms other than diffusion (diffusion plus source term partitioning and solubility limited leaching) are included in the program is indicators of other processes that may control leaching. Leach test data are presented and modeling results are discussed for laboratory scale waste forms composed of portland cement containing sodium sulfate salt, portland cement containing incinerator ash, and vinyl ester-styrene containing sodium sulfate. 16 refs., 38 figs., 5 tabs.

Fuhrmann, M.; Pietrzak, R.F.; Heiser, J.; Franz, E.M.; Colombo, P.

1990-11-01T23:59:59.000Z

472

Fiber laser development for LISA  

E-Print Network [OSTI]

We have developed a linearly-polarized Ytterbium-doped fiber ring laser with single longitudinal-mode output at 1064nm for LISA and other space applications. Single longitudinal-mode selection was achieved by using a fiber Bragg grating (FBG) and a fiber Fabry-Perot (FFP). The FFP also serves as a frequency-reference within our ring laser. Our laser exhibits comparable low frequency and intensity noise to Non-Planar Ring Oscillator (NPRO). By using a fiber-coupled phase modulator as a frequency actuator, the laser frequency can be electro-optically tuned at a rate of 100kHz. It appears that our fiber ring laser is promising for space applications where robustness of fiber optics is desirable.

Kenji Numata; Jeffrey R. Chen; Jordan Camp

2010-03-18T23:59:59.000Z

473

Recent development in green buildings  

SciTech Connect (OSTI)

Because of the environmental concerns about some materials used in buildings, particularly chlorofluorocarbon (CFC) fluids used as the blowing agent for insulation materials and as refrigerants used in the air conditioning systems have led to a search for environmentally safe alternatives. For insulation materials, new non-CFC blowing agents are still under development. However, the old insulation materials in the buildings will stay because they do not pose any further environmental damage. It is a different story for refrigerants used in air conditioning systems. This study reports that the change-over from CFC to non-CFC refrigerants in the existing and future air conditioning equipment could be a chance not only to take care of the environmental concerns, but to save energy as well. Alternative air conditioning technologies, such as the desiccant dehumidification and absorption systems, and the potential of some natural substances, such as carbon dioxide, as the future refrigerants are also discussed.

Mei, V.C.

1996-12-31T23:59:59.000Z

474

Project Development and Finance: Capabilities (Fact Sheet)  

SciTech Connect (OSTI)

Capabilities overview of NREL's Project Finance and Development Group within the Deployment and Market Transformation Directorate.

Not Available

2013-01-01T23:59:59.000Z

475

USDA FY14 Rural Development Loan Grants  

Broader source: Energy.gov [DOE]

The U.S. Department of Agriculture (USDA) Rural Development is accepting applications for multiple grants.

476

Potential for hydroelectric development in Alaska  

SciTech Connect (OSTI)

Testimony concerning Alaskan hydroelectricity development is presented. Various public and private organizations were represented.

Not Available

1981-01-01T23:59:59.000Z

477

Nanoparticles in Medicine: Therapeutic Applications and Developments  

E-Print Network [OSTI]

and diagnostic agents have been developed for the treatment of cancer, diabetes, pain, asthma, allergy

Zhang, Liangfang

478

Sodium Heat Engine Development Program  

SciTech Connect (OSTI)

The Sodium Heat Engine (SHE) is an efficient thermoelectric conversion device which directly generates electricity from a thermally regenerative electrochemical cell that relies on the unique conduction properties of {beta}{double prime}-alumina solid electrolyte (BASE). Laboratory models of a variety of SHE devices have demonstrated the feasibility and efficiency of the system, engineering development of large prototype devices has been slowed by a series of materials and fabrication problems. Failure of the electrolyte tubes has been a recurring problem and a number of possible causes have been postulated. To address these issues, a two-phase engineering development program was undertaken. This report summarizes the final results of the first phase of the program, which included extensive materials characterization activities, a study of applicable nondestructive evaluation methods, an investigation of possible stress states that would contribute to fracture, and certain operational issues associated with the electromagnetic pumps used in the SHE prototype. Mechanical and microstructural evaluation of commercially obtained BASE tubes revealed that they should be adequate for SHE applications and that sodium exposure produced no appreciable deleterious strength effects. Processing activities to produce a more uniform and smaller grain size for the BASE tubes were completed using isostatic pressing, extrusion, and slip casting. Green tubes were sintered by conventional and microwave plasma methods. Of particular interest is the residual stress state in the BASE tubes, and both analysis and nondestructive evaluation methods were employed to evaluate these stresses. X-ray and neutron diffraction experiments were performed to determine the bulk residual stresses in commercially fabricated BASE tubes; however, tube-to-tube variations and variations among the various methods employed did not allow formulation of a definitive definition of the as-fabricated stress state.

Singh, J.P.; Kupperman, D.S.; Majumdar, S.; Dorris, S.; Gopalsami, N.; Dieckman, S.L.; Jaross, R.A.; Johnson, D.L.; Gregar, J.S.; Poeppel, R.B.; Raptis, A.C.; Valentin, R.A.

1992-01-01T23:59:59.000Z

479

Alternative calcination development status report  

SciTech Connect (OSTI)

The Programmatic Spent Nuclear Fuel and (INEEL) Environmental Restoration and Waste Management Programs Environmental Impact Statement Record of Decision, dated June 1, 1995, specifies that high-level waste stored in the underground tanks at the ICPP continue to be calcined while other options to treat the waste are studied. Therefore, the High-Level Waste Program has funded a program to develop new flowsheets to increase the liquid waste processing rate. Simultaneously, a radionuclide separation process, as well as other options, are also being developed, which will be compared to the calcination treatment option. Two alternatives emerged as viable candidates; (1) elevated temperature calcination (also referred to as high temperature calcination), and (2) sugar-additive calcination. Both alternatives were determined to be viable through testing performed in a lab-scale calcination mockup. Subsequently, 10-cm Calciner Pilot Plant scoping tests were successfully completed for both flowsheets. The results were compared to the standard 500 C, high-ANN flow sheet (baseline flowsheet). The product and effluent streams were characterized to help elucidate the process chemistry and to investigate potential environmental permitting issues. Several supplementary tests were conducted to gain a better understanding of fine-particles generation, calcine hydration, scrub foaming, feed makeup procedures, sugar/organic elimination, and safety-related issues. Many of the experiments are only considered to be scoping tests, and follow-up experiments will be required to establish a more definitive understanding of the flowsheets. However, the combined results support the general conclusion that flowsheet improvements for the NWCF are technically viable.

Boardman, R.D.

1997-12-01T23:59:59.000Z

480

GIS Method for Developing Wind Supply Curves  

SciTech Connect (OSTI)

This report describes work conducted by the National Renewable Energy Laboratory (NREL) as part of the Wind Technology Partnership (WTP) sponsored by the U.S. Environmental Protection Agency (EPA). This project has developed methods that the National Development and Reform Commission (NDRC) intends to use in the planning and development of China's 30 GW of planned capacity. Because of China's influence within the community of developing countries, the methods and the approaches here may help foster wind development in other countries.

Kline, D.; Heimiller, D.; Cowlin, S.

2008-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "develop goals develop" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Connecting Land Use and Transportation Toward Sustainable Development: A Case Study of Houston-Galveston Metropolitan Area  

E-Print Network [OSTI]

of sustainable development; rather it has been defined and applied according to the goals and objectives of each agent or organization (Beatley 1995; Litman and Burwell 2006). There is, however, a widely used concept of sustainable development defined...

Lee, Jae Su

2011-02-22T23:59:59.000Z

482

ADVANCED HOT GAS FILTER DEVELOPMENT  

SciTech Connect (OSTI)

This report describes the fabrication and testing of continuous fiber ceramic composite (CFCC) based hot gas filters. The fabrication approach utilized a modified filament winding method that combined both continuous and chopped fibers into a novel microstructure. The work was divided into five primary tasks. In the first task, a preliminary set of compositions was fabricated in the form of open end tubes and characterized. The results of this task were used to identify the most promising compositions for sub-scale filter element fabrication and testing. In addition to laboratory measurements of permeability and strength, exposure testing in a coal combustion environment was performed to asses the thermo-chemical stability of the CFCC materials. Four candidate compositions were fabricated into sub-scale filter elements with integral flange and a closed end. Following the 250 hour exposure test in a circulating fluid bed combustor, the retained strength ranged from 70 t 145 percent of the as-fabricated strength. The post-test samples exhibited non-catastrophic failure behavior in contrast to the brittle failure exhibited by monolithic materials. Filter fabrication development continued in a filter improvement and cost reduction task that resulted in an improved fiber architecture, the production of a net shape flange, and an improved low cost bond. These modifications were incorporated into the process and used to fabricate 50 full-sized filter elements for testing in demonstration facilities in Karhula, Finland and at the Power Systems Development Facility (PSDF) in Wilsonville, AL. After 581 hours of testing in the Karhula facility, the elements retained approximately 87 percent of their as-fabricated strength. In addition, mechanical response testing at Virginia Tech provided a further demonstration of the high level of strain tolerance of the vacuum wound filter elements. Additional testing in the M. W. Kellogg unit at the PSDF has accumulated over 1800 hours of coal firing at temperatures of 760 °C including a severe thermal upset that resulted in the failure of several monolithic oxide elements. No failures of any kind have been reported for the MTI CFCC elements in either of these test campaigns. Additional testing is planned at the M. W. Kellogg unit and Foster Wheeler unit at the PSDF over the next year in order to qualify for consideration for the Lakeland PCFB. Process scale-up issues have been identified and manufacturing plans are being evaluated to meet the needs of future demand.

RICHARD A. WAGNER

1998-09-04T23:59:59.000Z

483

Nitride Fuel Development at the INL  

SciTech Connect (OSTI)

A new method for fabricating nitride-based fuels for nuclear applications is under development at the Idaho National Laboratory (INL). A primary objective of this research is the development of a process that could be operated as an automated or semi-automated technique reducing costs, worker doses, and eventually improving the final product form. To achieve these goals the fabrication process utilizes a new cryo-forming technique to produce microspheres formed from sub-micron oxide powder to improve material handling issues, yield rapid kinetics for conversion to nitrides, and reduced material impurity levels within the nitride compounds. The microspheres are converted to a nitride form within a high temperature particle fluidizing bed using a carbothermic process that utilizes a hydrocarbon – hydrogen - nitrogen gas mixture. A new monitor and control system using differential pressure changes in the fluidizing gas allows for real-time monitoring and control of the spouted bed reactor during conversion. This monitor and control system can provide real-time data that is used to control the gas flow rates, temperatures, and gas composition to optimize the fluidization of the particle bed. The small size (0.5 µm) of the oxide powders in the microspheres dramatically increases the kinetics of the conversion process yielding reduced process times and temperatures. Initial studies using surrogate ZrO2 powder have yielded conversion efficiencies of 90 -95 % nitride formation with only small levels of oxide and carbide contaminants present. Further studies are being conducted to determine optimal gas mixture ratios, process time, and temperature range for providing complete conversion to a nitride form.

W.E. Windes

2007-06-01T23:59:59.000Z

484

Development of a fourth generation predictive capability maturity model.  

SciTech Connect (OSTI)

The Predictive Capability Maturity Model (PCMM) is an expert elicitation tool designed to characterize and communicate completeness of the approaches used for computational model definition, verification, validation, and uncertainty quantification associated for an intended application. The primary application of this tool at Sandia National Laboratories (SNL) has been for physics-based computational simulations in support of nuclear weapons applications. The two main goals of a PCMM evaluation are 1) the communication of computational simulation capability, accurately and transparently, and 2) the development of input for effective planning. As a result of the increasing importance of computational simulation to SNL's mission, the PCMM has evolved through multiple generations with the goal to provide more clarity, rigor, and completeness in its application. This report describes the approach used to develop the fourth generation of the PCMM.

Hills, Richard Guy; Witkowski, Walter R.; Urbina, Angel; Rider, William J.; Trucano, Timothy Guy

2013-09-01T23:59:59.000Z

485

Biotechnology development for biomedical applications.  

SciTech Connect (OSTI)

Sandia's scientific and engineering expertise in the fields of computational biology, high-performance prosthetic limbs, biodetection, and bioinformatics has been applied to specific problems at the forefront of cancer research. Molecular modeling was employed to design stable mutations of the enzyme L-asparaginase with improved selectivity for asparagine over other amino acids with the potential for improved cancer chemotherapy. New electrospun polymer composites with improved electrical conductivity and mechanical compliance have been demonstrated with the promise of direct interfacing between the peripheral nervous system and the control electronics of advanced prosthetics. The capture of rare circulating tumor cells has been demonstrated on a microfluidic chip produced with a versatile fabrication processes capable of integration with existing lab-on-a-chip and biosensor technology. And software tools have been developed to increase the calculation speed of clustered heat maps for the display of relationships in large arrays of protein data. All these projects were carried out in collaboration with researchers at the University of Texas M. D. Anderson Cancer Center in Houston, TX.

Kuehl, Michael; Brozik, Susan Marie; Rogers, David Michael; Rempe, Susan L.; Abhyankar, Vinay V.; Hatch, Anson V.; Dirk, Shawn M.; Hedberg-Dirk, Elizabeth (University of New Mexico, Albuquerque, NM); Sukharev, Sergei (University of Maryland, College Park, MD); Anishken, Andriy (University of Maryland, College Park, MD); Cicotte, Kirsten; De Sapio, Vincent; Buerger, Stephen P.; Mai, Junyu

2010-11-01T23:59:59.000Z

486

Tectonic development of Columbia Plateau  

SciTech Connect (OSTI)

The Columbia Plateau can be subdivided into two structural subprovinces: the Palouse, characterized by the Blue Mountain anticlinorium, and the Yakima foldbelt, characterized by generally narrow, asymmetric (faulted) anticlinal ridges separated by broad basins. The tectonic features of the Columbia Plateau result from (1) north-south compression during and following the emplacement of the Columbia River Basalt (CRB); (2) the subsidence of the Yakima foldbelt subprovince relative to a stable Palouse subprovince; (3) the growth of the Yakima folds superimposed on a subsiding basin; (4) the growth of major northwest-trending strike-slip faults on the western side of the plateau; and (5) the influence of regional structures that trend into the Columbia Plateau. Subsidence of the Yakima foldbelt subprovince began prior to the eruption of the CRB and has continued from the Miocene to the present. The rate of subsidence kept pace with CRB emplacement, decreasing as eruption rates waned. Simultaneously, anticlinal fold growth within the Yakima foldbelt occurred under north-south compression, and decreased as the rate of subsidence and CRB eruptions declined. Paleomagnetic data indicate fold growth was accompanied by a component of clockwise rotation that occurred on a local scale and only in anticlines. The development of these tectonic features is consistent with oblique subduction along a converging plate margin.

Reidel, S.B.; Chamness, M.A.; Fecht, K.R.; Hagood, M.C.; Nolan, T.L.

1987-08-01T23:59:59.000Z

487

Streak tube photocathode development program. Phase 2, Final technical report  

SciTech Connect (OSTI)

This report details the progress made toward developing a streak tube with greater than 1% quantum efficiency at a wavelength of 1300 nm. The achieved performance is the result of approximately three years of effort. The goal of Phase 2 of this contract was to seal a working 1.3 {mu}m streak tube. This effort was focused in two areas. First there was a continuing effort to further develop and demonstrate the cathodes ability to meet the stated requirements. The second effort was aimed at solving the mechanical and process related problems related to sealing this cathode onto a EG&G streak tube.

Not Available

1993-11-20T23:59:59.000Z

488

Progress in The Lost Circulation Technology Development Program  

SciTech Connect (OSTI)

Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50{percent} through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April, 1990--March, 1991. 4 refs., 15 figs., 1 tab.

Glowka, D.A.; Schafer, D.M.; Loeppke, G.E.; Wright, E.K.

1991-01-01T23:59:59.000Z

489

Results from Development of Model Specifications for Multifamily Energy Retrofits  

SciTech Connect (OSTI)

Specifications, modeled after CSI MasterFormat, provide the trade contractors and builders with requirements and recommendations on specific building materials, components and industry practices that comply with the expectations and intent of the requirements within the various funding programs associated with a project. The goal is to create a greater level of consistency in execution of energy efficiency retrofits measures across the multiple regions a developer may work. IBACOS and Mercy Housing developed sample model specifications based on a common building construction type that Mercy Housing encounters.

Brozyna, K.

2012-08-01T23:59:59.000Z

490

Steam Challenge: Developing A New DOE Program to Help Industry be Steam Smart  

E-Print Network [OSTI]

Last year, the Alliance to Save Energy, the Department of Energy's Office of Industrial Technologies, and a cadre of private companies and associations formed an innovative "Steam Partnership" with the goal of developing a new, DOE technical...

Jones, T.; Hart, F.

491

Development of software architecture for environmental monitoring using wireless sensor networks  

E-Print Network [OSTI]

In this thesis, I describe the development of the software architecture for temperature monitoring using Wireless Sensor Networks (WSN). The goal of the software is to provide a means to remotely monitor and analyze ...

Hari, Piyush

2006-01-01T23:59:59.000Z

492

Sustainable Energy for Development The evolution of technologies provides remote, non-grid  

E-Print Network [OSTI]

Sustainable Energy for Development GOALS: The evolution of technologies provides remote, non, energy storage, light emitting diodes, energy monitoring and management. RESEARCH ISSUES: Investigate the correlation of energy and social well being and associated energy costs. Research current methods

Mottram, Nigel

493

Position Title: Student Development Coordinator Primary Labor Position (10 hours required)  

E-Print Network [OSTI]

with Career Development and Placement, Counseling and Health Services, Wellness, Campus Ministry, Labor and goals, commitment to service, ability to articulate and interpret observations, experiences Qualifications: A. General: Very organized, dependable, responsible, culturally sensitive, trustworthy B. Skill

Baltisberger, Jay H.

494

Mechanical development of an actuation system for a parabolic solar trough collector  

E-Print Network [OSTI]

This thesis documents my personal contribution to the development of a hydraulic-based actuation system for a solar trough collector. The goal of this project was to design the actuation system using hydraulic actuators ...

Carrillo, Juan Felipe (Carrillo Salazar)

2013-01-01T23:59:59.000Z

495

In 2011, the University of Minnesota's Twin Cities Sustainability Committee developed a campus climate  

E-Print Network [OSTI]

Benefits In 2011, the University of Minnesota's Twin Cities Sustainability Committee developed' Climate Commitment and to implement University of Minnesota sustainability goals. The CAP identifies neutrality by 2050. The Sustainability Committee, a standing body charged by the president

Webb, Peter

496

Development, characterization, and application of a charged particle microbeam for radiobiological research  

E-Print Network [OSTI]

The goal of this work is to develop a charged-particle microbeam for use in radiobiological research at the MIT Laboratory for Accelerator Beam Applications (LABA). The purpose of this device is to precisely explore the ...

Folkert, Michael R. (Michael Ryan), 1975-

2005-01-01T23:59:59.000Z

497

Advanced Turbine Systems (ATS) program conceptual design and product development  

SciTech Connect (OSTI)

Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NO{sub x}, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coatings and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced Ge heavy-duty machine utilizing advanced cooling and enhancement in component efficiency. Both of these activities required the identification and resolution of technical issues critical to achieving ATS goals. The emphasis for the industrial ATS was placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS was placed on developing a technology base for advanced turbine cooling, while utilizing demonstrated and planned improvements in low emission combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE Power Systems is solely responsible for offering GE products for the industrial and utility markets.

NONE

1996-08-31T23:59:59.000Z

498

Development of a Very Dense Liquid Cooled Compute Platform  

SciTech Connect (OSTI)

The objective of this project was to design and develop a prototype very energy efficient high density compute platform with 100% pumped refrigerant liquid cooling using commodity components and high volume manufacturing techniques. Testing at SLAC has indicated that we achieved a DCIE of 0.93 against our original goal of 0.85. This number includes both cooling and power supply and was achieved employing some of the highest wattage processors available.

Hughes, Phillip N.; Lipp, Robert J.

2013-12-10T23:59:59.000Z

499

Hydrogen Fuel Cell Development in Columbia (SC)  

SciTech Connect (OSTI)

This is an update to the final report filed after the extension of this program to May of 2011. The activities of the present program contributed to the goals and objectives of the Fuel Cell element of the Hydrogen, Fuel Cells and Infrastructure Technologies Program of the Department of Energy through five sub-projects. Three of these projects have focused on PEM cells, addressing the creation of carbon-based metal-free catalysts, the development of durable seals, and an effort to understand contaminant adsorption/reaction/transport/performance relationships at low contaminant levels in PEM cells. Two programs addressed barriers in SOFCs; an effort to create a new symmetrical and direct hydrocarbon fuel SOFC designs with greatly increased durability, efficiency, and ease of manufacturing, and an effort to create a multiphysics engineering durability model based on electrochemical impedance spectroscopy interpretations that associate the micro-details of how a fuel cell is made and their history of (individual) use with specific prognosis for long term performance, resulting in attendant reductions in design, manufacturing, and maintenance costs and increases in reliability and durability.

Reifsnider, Kenneth [University of South Carolina; Chen, Fanglin [University of South Carolina; Popov, Branko [University of South Carolina; Chao, Yuh [University of South Carolina; Xue, Xingjian [University of South Carolina

2012-09-15T23:59:59.000Z

500

Development of stripper options for FRIB  

SciTech Connect (OSTI)

The US Department of Energy Facility for Rare Isotope Beams (FRIB) at Michigan State University includes a heavy ion superconducting linac capable of accelerating all ions up to uranium with energies higher than 200 MeV/u and beam power up to 400 kW. To achieve these goals with present ion source performance it is necessary to accelerate simultaneously two charge states of uranium from the ion source in the first section of the linac. At an energy of approximately 16.5 MeV/u it is planned to strip the uranium beam to reduce the voltage needed in the rest of the linac to achieve the final energy. Up to five different charge states are planned to be accelerated simultaneously after the stripper. The design of the stripper is a challenging problem due to the high power deposited (approximately 0.7 kW) in the stripper media by the beam in a small spot. To assure success of the project we have established a research and development program that includes several options: carbon or diamond foils, liquid lithium films, gas strippers and plasma strippers. We present in this paper the status of the different options.

Marti, F.; Hershcovitch, A.; Momozaki, Y.; Nolen, J.; Reed, C.; Thieberger, P.

2010-09-12T23:59:59.000Z