National Library of Energy BETA

Sample records for deutsche bank ag

  1. Deutsche Solar AG formerly Bayer Solar GmbH | Open Energy Information

    Open Energy Info (EERE)

    Solar AG formerly Bayer Solar GmbH Jump to: navigation, search Name: Deutsche Solar AG (formerly Bayer Solar GmbH) Place: FreibergSachsen, Germany Zip: 9599 Sector: Solar Product:...

  2. Speakers: Adam Sieminski, Deutsche Bank Stephen P. A. Brown, Resources for the Future

    U.S. Energy Information Administration (EIA) Indexed Site

    5: "Energy and the Economy" Speakers: Adam Sieminski, Deutsche Bank Stephen P. A. Brown, Resources for the Future Donald L. Paul, University of Southern California Energy Institute David Sandalow, DOE Christof Rühl, Group Chief Economist, BP [Note: Recorders did not pick up introduction of panel (see biographies for details on the panelists) or introduction of session.] Adam: Microphone. So, we've lost a little bit of time because of all of the sessions running a bit over, but here is

  3. SIMULATIONS OF THE AGS MMPS STORING ENERGY IN CAPACITOR BANKS

    SciTech Connect (OSTI)

    MARNERIS,I.; BADEA, V.S.; BONATI, R.; ROSER, T.; SANDBERG, J.

    2007-06-25

    The Brookhaven AGS Main Magnet Power Supply (MMPS) is a thyristor control supply rated at 5500 Amps, +/-9000 Volts. The peak magnet power is 50 MWatts. The power supply is fed from a motor/generator manufactured by Siemens. The generator is 3 phase 7500 Volts rated at 50 MVA. The peak power requirements come from the stored energy in the rotor of the motor/generator. The motor generator is about 45 years old, made by Siemens and it is not clear if companies will be manufacturing similar machines in the future. We are therefore investigating different ways of storing energy for future AGS MMPS operations. This paper will present simulations of a power supply where energy is stored in capacitor banks. Two dc to dc converters will be presented along with the control system of the power section. The switching elements will be IGCT's made by ABB. The simulation program used is called PSIM version 6.1. The average power from the local power authority into the power supply will be kept constant during the pulsing of the magnets at +/-50 MW. The reactive power will also be kept constant below 1.5 MVAR. Waveforms will be presented.

  4. SIMULATION RESULTS OF RUNNING THE AGS MMPS, BY STORING ENERGY IN CAPACITOR BANKS.

    SciTech Connect (OSTI)

    MARNERIS, I.

    2006-09-01

    The Brookhaven AGS is a strong focusing accelerator which is used to accelerate protons and various heavy ion species to equivalent maximum proton energy of 29 GeV. The AGS Main Magnet Power Supply (MMPS) is a thyristor control supply rated at 5500 Amps, +/-go00 Volts. The peak magnet power is 49.5 Mwatts. The power supply is fed from a motor/generator manufactured by Siemens. The motor is rated at 9 MW, input voltage 3 phase 13.8 KV 60 Hz. The generator is rated at 50 MVA its output voltage is 3 phase 7500 Volts. Thus the peak power requirements come from the stored energy in the rotor of the motor/generator. The rotor changes speed by about +/-2.5% of its nominal speed of 1200 Revolutions per Minute. The reason the power supply is powered by the Generator is that the local power company (LIPA) can not sustain power swings of +/- 50 MW in 0.5 sec if the power supply were to be interfaced directly with the AC lines. The Motor Generator is about 45 years old and Siemens is not manufacturing similar machines in the future. As a result we are looking at different ways of storing energy and being able to utilize it for our application. This paper will present simulations of a power supply where energy is stored in capacitor banks. The simulation program used is called PSIM Version 6.1. The control system of the power supply will also be presented. The average power from LIPA into the power supply will be kept constant during the pulsing of the magnets at +/-50 MW. The reactive power will also be kept constant below 1.5 MVAR. Waveforms will be presented.

  5. DBD Deutsche Biodiesel GmbH | Open Energy Information

    Open Energy Info (EERE)

    DBD Deutsche Biodiesel GmbH Jump to: navigation, search Name: DBD Deutsche Biodiesel GmbH Place: Berlin, Germany Product: Developer of the DBD Regensberg biodiesel project....

  6. Deutsches Windenergie Institut | Open Energy Information

    Open Energy Info (EERE)

    in wind energy, offering wind energy related measurements, energy analysis studies, education, and technical, economic, and political consultancy for industry, developers, banks,...

  7. DS Deutsche Solargesellschaft mbH | Open Energy Information

    Open Energy Info (EERE)

    Germany Zip: 74074 Sector: Solar Product: DS Deutsche Solargesellschaft markets PV installations in Spain to mostly German private investors. Coordinates: 49.143145, 9.219295...

  8. Commissioning of the new AGS MMPS transformers

    SciTech Connect (OSTI)

    Bajon,E.; Badea, V. S.; Bannon, M.; Bonati, R.; Marneris, I. M.; Porqueddu, r.; Roser, T.; Sandberg, J.; Savatteri, S.

    2009-05-04

    The Brookhaven AGS Main Magnet Power Supply (MMPS) is a thyristor control supply rated at 5500 Amps. +/-9000 Volts. The peak magnet power is 50 MWatts. The power supply is fed from a motor/generator manufactured by Siemens. During rectify and invert operation the P Bank power supplies are used. During the flattops the F Bank power supplies are used. The P Bank power supplies are fed from two 23 MVA transformers and the F Bank power supplies are fed from two 5.3 MYA transformers. The fundamental frequency of the F Bank power supplies is 1440 Hz, however the fundamental frequency of the P banks was 720 Hz. It was very important to reduce the ripple during rectify to improve polarized proton operations. For this reason and also because the original transformers were 45 years old we replaced these transformers with new ones and we made the fundamental frequency of both P and F banks 1440 Hz. This paper will highlight the major hurdles that were involved during the installation of the new transformers. It will present waveforms while running at different power levels up to 6MW full load. It will show the transition from the F-Bank power supplies to the P-Banks and also show the improvements in ripple made on the P-Bank power supplies.

  9. Slide 1

    U.S. Energy Information Administration (EIA) Indexed Site

    Deutsche Bank AG Oil & Financial Markets 2011 EIA Energy Conference 26-April-2011 Adam Sieminski, Chief Energy Economist Commodities Research adam.sieminski@db.com USA +1 202 662 1624 Deutsche Bank AG All prices are those current at the end of the previous trading session unless otherwise indicated. Prices are sourced from local exchanges via Reuters, Bloomberg and other vendors. Data is sourced from Deutsche Bank and subject companies. DISCLOSURES AND ANALYST CERTIFICATIONS ARE LOCATED IN

  10. Antec Solar Energy AG formerly Oekologik Ecovest AG | Open Energy...

    Open Energy Info (EERE)

    Antec Solar Energy AG formerly Oekologik Ecovest AG Jump to: navigation, search Name: Antec Solar Energy AG (formerly Oekologik Ecovest AG) Place: Arnstadt, Germany Zip: 99310...

  11. Abwicklungsgesellschaft Biogas I AG Formerly Schmack Biogas AG...

    Open Energy Info (EERE)

    Abwicklungsgesellschaft Biogas I AG Formerly Schmack Biogas AG Jump to: navigation, search Name: Abwicklungsgesellschaft Biogas I AG (Formerly Schmack Biogas AG) Place: Schwandorf,...

  12. Renewable Energy Engineering Consulting AG REECON AG | Open Energy...

    Open Energy Info (EERE)

    Consulting AG REECON AG Jump to: navigation, search Name: Renewable Energy Engineering Consulting AG (REECON AG) Place: Heppenheim, Hessen, Germany Zip: D-64646 Sector: Solar...

  13. Solarsquare AG | Open Energy Information

    Open Energy Info (EERE)

    Solarsquare AG Jump to: navigation, search Name: Solarsquare AG Place: Switzerland Sector: Solar Product: Solar modules distributor. References: Solarsquare AG1 This article is a...

  14. Campa AG | Open Energy Information

    Open Energy Info (EERE)

    Campa AG Jump to: navigation, search Name: Campa AG Place: Ochsenfurt, Germany Zip: 97199 Product: String representation "Campa AG is one ... on and trading." is too long....

  15. Eifelstrom AG | Open Energy Information

    Open Energy Info (EERE)

    Eifelstrom AG Place: Germany Sector: Solar Product: Holding company belonging to the family of Frank Asbeck, founder of Solar World AG. References: Eifelstrom AG1 This article...

  16. VWind AG | Open Energy Information

    Open Energy Info (EERE)

    VWind AG Jump to: navigation, search Name: VWind AG Place: Germany Sector: Wind energy Product: Germany-based offshore wind installation company. References: VWind AG1 This...

  17. Altus AG | Open Energy Information

    Open Energy Info (EERE)

    Altus AG Jump to: navigation, search Name: Altus AG Place: Germany Sector: Renewable Energy Product: Germany-based renewable energy project developer. References: Altus AG1 This...

  18. WKV AG | Open Energy Information

    Open Energy Info (EERE)

    WKV AG Place: Gutach, Baden-Wrttemberg, Germany Zip: 79261 Sector: Hydro Product: German-based hydro turbines manufacturer, Wasserkraft Volk AG (WKV AG) provides technology...

  19. Umwelt Management AG UMaAG | Open Energy Information

    Open Energy Info (EERE)

    Management AG UMaAG Jump to: navigation, search Name: Umwelt Management AG (UMaAG) Place: Cuxhaven, Germany Zip: 27478 Sector: Wind energy Product: RE project developer, esp. wind...

  20. Solarparc AG Former WindWelt AG | Open Energy Information

    Open Energy Info (EERE)

    Name: Solarparc AG (Former WindWelt AG) Place: Bonn, Germany Zip: 53115 Sector: Solar, Wind energy Product: Focused on planning, developing and operating wind and solar power...

  1. Tse AG | Open Energy Information

    Open Energy Info (EERE)

    Tse AG Jump to: navigation, search Name: tse.AG Place: Germany Product: Thenergo's German subsidiary. References: tse.AG1 This article is a stub. You can help OpenEI by expanding...

  2. Solarvalue AG | Open Energy Information

    Open Energy Info (EERE)

    Solarvalue AG Jump to: navigation, search Name: Solarvalue AG Place: Berlin, Berlin, Germany Zip: D-10719 Product: German manfuacturer of polysilicon made through metallurgical...

  3. Odersun AG | Open Energy Information

    Open Energy Info (EERE)

    Odersun AG Jump to: navigation, search Name: Odersun AG Place: Frankfurt, Germany Zip: 15236 Product: German manufacturer of copper indium disulphide on copper tape (CISCuT)...

  4. Varta AG | Open Energy Information

    Open Energy Info (EERE)

    Varta AG Jump to: navigation, search Name: Varta AG Place: Hanover, Germany Zip: 30419 Product: Headquartered in Hanover, concentrates on developing its global microbattery...

  5. ABIDAS AG | Open Energy Information

    Open Energy Info (EERE)

    ABIDAS AG Jump to: navigation, search Name: ABIDAS AG Place: Werder, Brandenburg, Germany Zip: 14542 Product: Local energy consultant and PV systems installer and integrator....

  6. Interstrom AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Interstrom AG Place: Bayreuth, Bavaria, Germany Zip: 95448 Sector: Solar Product: Germany-based electricity provider. The firm is...

  7. Solare AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Solare AG Place: Cologne, North Rhine-Westphalia, Germany Zip: 50678 Sector: Solar Product: Germany-based equipment manufacturer and developer...

  8. Inergetic AG | Open Energy Information

    Open Energy Info (EERE)

    Inergetic AG Jump to: navigation, search Name: Inergetic AG Place: Schwerin, Germany Zip: 19061 Sector: Biomass Product: Biomass power plant developer and operator. Actively...

  9. Solarcomplex AG | Open Energy Information

    Open Energy Info (EERE)

    Solarcomplex AG Jump to: navigation, search Name: solarcomplex AG Place: Singen, Germany Zip: 78224 Sector: Renewable Energy, Solar Product: Regional solar energy company with the...

  10. Energieteam AG | Open Energy Information

    Open Energy Info (EERE)

    Energieteam AG Jump to: navigation, search Name: Energieteam AG Place: Lichtenau, Germany Zip: D-33165 Sector: Wind energy Product: Wind farm developer. Has developed 904MW wind in...

  11. Solea AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Solea AG Place: Plattling, Germany Zip: 94447 Product: A Germany PV project developer and building contractor, who also manufactures its own...

  12. REON AG | Open Energy Information

    Open Energy Info (EERE)

    REON AG Jump to: navigation, search Name: REON AG Place: Worpswede, Germany Zip: D-27726 Sector: Services Product: Specialists in technical and strategic advisory services for...

  13. ENRO AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: ENRO AG Place: Essen, Germany Zip: 45128 Sector: Biomass Product: Focuses on distributed energy supply concepts for local authorities and...

  14. Solarstocc AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Bad Zwischenahn, Germany Zip: 26160 Product: Designer and manufacturer of photovoltaic products and components. References: Solarstocc AG1 This article is a stub. You...

  15. Kopf AG | Open Energy Information

    Open Energy Info (EERE)

    Name: Kopf AG Place: Sulz-Bergfelden (DE), Germany Zip: 72172 Product: Focused on photovoltaic power systems, and energy and environmental technology. References: Kopf AG1 This...

  16. Evader AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Evader AG Place: Zug, Switzerland Product: Joint venture between Washington-based Evader Inc and the Schneider Group, in order to streamline...

  17. Wattner AG | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Wattner AG Place: Kln, Germany Zip: 50679 Product: German project finance arranger. References: Wattner AG1 This article is a stub. You can...

  18. Eutropa AG | Open Energy Information

    Open Energy Info (EERE)

    Eutropa AG Jump to: navigation, search Name: Eutropa AG Place: Munich, Bavaria, Germany Zip: 82008 Sector: Renewable Energy Product: Munich-based consultancy providing information...

  19. Stadtwerke Mainz AG | Open Energy Information

    Open Energy Info (EERE)

    Mainz AG Jump to: navigation, search Name: Stadtwerke Mainz AG Place: Mainz, Germany Zip: 55118 Product: Utility in Mainz, Germany. References: Stadtwerke Mainz AG1 This article...

  20. ASP AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: ASP AG Place: Laupen, Switzerland Zip: CH-8637 Product: Manufacturer of inverters for PV systems and other off- and on-grid applications. References: ASP AG1 This...

  1. Loremo AG | Open Energy Information

    Open Energy Info (EERE)

    Loremo AG Place: Mnchen, Bavaria, Germany Zip: 80807 Product: Designer of a 157 mpg light weight 2 cylinder Turbo-Diesel car. References: Loremo AG1 This article is a...

  2. Solarpraxis AG | Open Energy Information

    Open Energy Info (EERE)

    Publishes technical journals and organises conferences in building services, the copper industry and solar technology. References: Solarpraxis AG1 This article is a stub....

  3. Sunline AG | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: German solar PV and thermal company active in planning and marketing solar installations. References: Sunline AG1 This article is a stub. You can help...

  4. Solarion AG | Open Energy Information

    Open Energy Info (EERE)

    Germany Zip: 4288 Sector: Solar Product: Focuses on the development, production and marketing of CIGS thin-film solar cells on flexible substrate. References: Solarion AG1 This...

  5. Ecodasa AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Berlin, Berlin, Germany Zip: 13435 Product: Ecodasa is an integrated biodiesel producer with a planned capacity of 774m litres biodiesel until 2008. References:...

  6. Solemaxx AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: Solemaxx AG Place: Zug, Switzerland Zip: CH-6300 Sector: Renewable Energy, Solar Product: Switzerland-based solar project developer and renewable energy...

  7. Meeco AG | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: meeco AG Place: Zug, Switzerland Zip: 6304 Sector: Renewable Energy Product: Switzerland-based company that offers engineering and management solutions in...

  8. Parabel AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: Parabel AG Place: Berlin-Pankow, Berlin, Germany Sector: Solar Product: Sells a thin-film roofing product using UniSolar laminates, and distributes and...

  9. Sunways AG | Open Energy Information

    Open Energy Info (EERE)

    Constance, Germany Zip: D-78467 Product: German manufacturer of PV cells, modules, inverters and integrated systems. References: Sunways AG1 This article is a stub. You can...

  10. Conergy AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: Conergy AG Place: Hamburg, Hamburg, Germany Zip: 20537 Sector: Biofuels, Biomass, Wind energy Product: PV and passive system integrator and inverter...

  11. Ristma AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: Ristma AG Place: GlisVS, Switzerland Zip: 3902 Product: Swiss battery pack manufacturer primarily for the handheld cordless power tool market. It is laos...

  12. Cowatec AG | Open Energy Information

    Open Energy Info (EERE)

    Cowatec AG Place: Burglengenfeld, Bavaria, Germany Zip: 93133 Product: Cowatec is a biogas plant turnkey provider, also offering financial and permission planning. References:...

  13. Gorlitz AG | Open Energy Information

    Open Energy Info (EERE)

    Sector: Services Product: Company providing products and services in energy data communication and processing. References: Gorlitz AG1 This article is a stub. You can help...

  14. Carpevigo AG | Open Energy Information

    Open Energy Info (EERE)

    Name: Carpevigo AG Place: Holzkirchen, Germany Zip: 83607 Product: Carpevigo is a German turnkey PV project developer that issues bonds to finance investments. References:...

  15. Bosch Solar Energy AG former ErSol Solar Energy AG | Open Energy...

    Open Energy Info (EERE)

    AG former ErSol Solar Energy AG Jump to: navigation, search Name: Bosch Solar Energy AG (former ErSol Solar Energy AG) Place: Erfurt, Germany Zip: D-99099 Product: Germany-based...

  16. PV Crystalox Solar AG formerly PV Silicon AG | Open Energy Information

    Open Energy Info (EERE)

    PV Crystalox Solar AG formerly PV Silicon AG Jump to: navigation, search Name: PV Crystalox Solar AG (formerly PV Silicon AG) Place: Abingdon, England, United Kingdom Zip: OX14 4SE...

  17. AG Land 5 | Open Energy Information

    Open Energy Info (EERE)

    5 Jump to: navigation, search Name AG Land 5 Facility AG Land 5 Sector Wind energy Facility Type Community Wind Facility Status In Service Owner AG Land Energy LLC Developer...

  18. Bosch Solar Energy AG | Open Energy Information

    Open Energy Info (EERE)

    Bosch Solar Energy AG Jump to: navigation, search Logo: Bosch Solar Energy AG Name: Bosch Solar Energy AG Address: Wilhelm-Wolff-Strasse 23 Place: Arnstadt, Germany Product: solar...

  19. Green Investment Bank | Open Energy Information

    Open Energy Info (EERE)

    Name: Green Investment Bank Place: United Kingdom Product: UK-based investment bank that will focus on clean energy investment. References: Green Investment Bank1 This article...

  20. Carbon Bank Ireland | Open Energy Information

    Open Energy Info (EERE)

    Ireland Jump to: navigation, search Name: Carbon Bank Ireland Place: Nevada Zip: 89411 Product: Investment bank focused on CDM projects. References: Carbon Bank Ireland1 This...

  1. Swiss Wafers AG | Open Energy Information

    Open Energy Info (EERE)

    Wafers AG Jump to: navigation, search Name: Swiss Wafers AG Place: Weinfelden, Switzerland Zip: 8570 Sector: Services Product: Swiss-based manufacturer of mono and multicrystalline...

  2. Module Solar AG | Open Energy Information

    Open Energy Info (EERE)

    Module Solar AG Jump to: navigation, search Name: Module Solar AG Place: Baar, Switzerland Product: A Swiss PV module and materials supplier and developer Coordinates: 40.808083,...

  3. Huber and Suhner AG | Open Energy Information

    Open Energy Info (EERE)

    Suhner AG Jump to: navigation, search Name: Huber and Suhner AG Place: Pfaeffikon, Switzerland Zip: 8330 Sector: Solar Product: Huber and Suhner specialises in electrical and...

  4. Clean Mobile AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Munich, Bavaria, Germany Sector: Vehicles Product: Manufacturer of fuel cell-powered drives for small vehicles. References: Clean Mobile AG1 This article is a...

  5. AG Solutions Inc | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: AG Solutions Inc. Place: Gladstone, Michigan Product: 10Mgpy biodiesel producer in Gladstone, Michigan. References: AG Solutions Inc.1 This article is a...

  6. EOP Biodiesel AG | Open Energy Information

    Open Energy Info (EERE)

    EOP Biodiesel AG Jump to: navigation, search Name: EOP Biodiesel AG Place: Falkenhagen, Germany Zip: 16928 Product: German producer of biodiesel from rapeseed. References: EOP...

  7. ADM Hamburg AG | Open Energy Information

    Open Energy Info (EERE)

    ADM Hamburg AG Jump to: navigation, search Name: ADM Hamburg AG Place: Hamburg, Hamburg, Germany Zip: 21107 Product: Biodiesel producer with a capacity of 595m litresyear....

  8. Norddeutsche Affinerie AG | Open Energy Information

    Open Energy Info (EERE)

    Affinerie AG Jump to: navigation, search Name: Norddeutsche Affinerie AG Place: Hamburg, Germany Zip: 20539 Product: Producer and recycler of copper. Coordinates: 53.553345,...

  9. Centrosolar Group AG | Open Energy Information

    Open Energy Info (EERE)

    Group AG Jump to: navigation, search Name: Centrosolar Group AG Place: Munich, Germany Zip: 80807 Product: German holding company of various PV-related subsidiaries....

  10. ASSET LOGISTIC AG | Open Energy Information

    Open Energy Info (EERE)

    LOGISTIC AG Jump to: navigation, search Name: ASSET@LOGISTIC AG Place: Hamburg, Hamburg, Germany Zip: 20148 Sector: Wind energy Product: Developer of 3 wind farms in Almeria,...

  11. Bernried Erdwarme AG | Open Energy Information

    Open Energy Info (EERE)

    Bernried Erdwarme AG Jump to: navigation, search Name: Bernried Erdwarme AG Place: Germany Sector: Geothermal energy Product: Germany-based geothermal development company....

  12. SolarHybrid AG | Open Energy Information

    Open Energy Info (EERE)

    SolarHybrid AG Jump to: navigation, search Name: SolarHybrid AG Place: Germany Sector: Solar Product: Germany-based solar thermal hybrid product manufacturer References:...

  13. REpower Systems AG | Open Energy Information

    Open Energy Info (EERE)

    Systems AG Jump to: navigation, search Name: REpower Systems AG Place: Hamburg, Germany Zip: D-22297 Sector: Services, Wind energy Product: Wind turbine manufacturer with...

  14. In Trust AG | Open Energy Information

    Open Energy Info (EERE)

    Trust AG Jump to: navigation, search Name: in-Trust AG Place: Regensburg, Bavaria, Germany Zip: 93047 Product: Germany-based investment company focused mainly on investing in...

  15. SolarWorld AG | Open Energy Information

    Open Energy Info (EERE)

    SolarWorld AG Jump to: navigation, search Name: SolarWorld AG Place: Bonn, Germany Zip: 53113 Product: Vertically integrated PV manufacturer, with factories in Freiberg, Germany...

  16. Edisun Power AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Zurich, Switzerland Zip: 8006 Sector: Solar Product: Edisun Power Europe AG finances, acquires and operates solar power installations, and markets solar power....

  17. Power PLUS Communications AG | Open Energy Information

    Open Energy Info (EERE)

    PLUS Communications AG Jump to: navigation, search Name: Power PLUS Communications AG Place: Mannheim, Germany Zip: 68167 Product: String representation "Power Plus Comm ... nergy...

  18. American Ag Fuels LLC | Open Energy Information

    Open Energy Info (EERE)

    American Ag Fuels LLC Jump to: navigation, search Name: American Ag Fuels LLC Place: Defiance, Ohio Zip: 43512 Product: Biodiesel producer in Defiance, Ohio. References: American...

  19. Solar Millennium AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Solar Millennium AG Place: Erlangen, Bavaria, Germany Zip: D-91052 Sector: Solar Product: Bavaria-based solar project developer; provides...

  20. Nature Elements Holding AG | Open Energy Information

    Open Energy Info (EERE)

    Holding AG Jump to: navigation, search Name: Nature Elements Holding AG Place: Baar, Switzerland Zip: CH-6340 Sector: Renewable Energy Product: Swiss developer of renewable energy...

  1. Sonne Wind Beteiligungen AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Sonne+Wind Beteiligungen AG Place: Berlin, Germany Zip: 10715 Sector: Efficiency, Solar, Wind energy Product: Berlin-based VC firm...

  2. ABO Wind AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: ABO Wind AG Place: Hessen, Germany Zip: 65193 Sector: Bioenergy, Wind energy Product: German developer of wind and bioenergy generation assets....

  3. Seeger Engineering AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Seeger Engineering AG Place: Hessisch Lichtenau, Hessen, Germany Zip: 37235 Sector: Biomass, Services Product: Services range from project...

  4. SITIZN Group Holding AG | Open Energy Information

    Open Energy Info (EERE)

    SITIZN Group Holding AG Jump to: navigation, search Name: SITIZN Group Holding AG Place: Riederich, Germany Zip: 72585 Sector: Solar Product: Germany-based solar technology and...

  5. Meyer Burger AG | Open Energy Information

    Open Energy Info (EERE)

    Meyer Burger AG Jump to: navigation, search Name: Meyer Burger AG Place: Steffisburg, Switzerland Zip: 3613 Sector: Solar Product: Manufactures wire saws for cutting and processing...

  6. Krass Capital Group AG | Open Energy Information

    Open Energy Info (EERE)

    Krass Capital Group AG Jump to: navigation, search Name: Krass Capital Group AG Place: Grfelfing, Bulgaria Zip: 82166 Sector: Renewable Energy Product: Grafelfing-based firm...

  7. Offshore Ostsee Wind AG | Open Energy Information

    Open Energy Info (EERE)

    Ostsee Wind AG Jump to: navigation, search Name: Offshore Ostsee Wind AG Place: Brgerende, Mecklenburg-Western Pomerania, Germany Zip: 18211 Sector: Wind energy Product: Joint...

  8. Centrotec Sustainable AG | Open Energy Information

    Open Energy Info (EERE)

    Sustainable AG Jump to: navigation, search Name: Centrotec Sustainable AG Place: Brilon, Germany Zip: D - 59929 Sector: Solar Product: Provides gas flue and climate systems for...

  9. Energie AG Oberoesterreich | Open Energy Information

    Open Energy Info (EERE)

    Energie AG Oberoesterreich Jump to: navigation, search Name: Energie AG Oberoesterreich Place: Linz, Austria Zip: 4021 Product: Utility focused on Upper Austria. Coordinates:...

  10. AGO AG Energie Anlagen | Open Energy Information

    Open Energy Info (EERE)

    AGO AG Energie Anlagen Jump to: navigation, search Name: AGO AG Energie + Anlagen Place: Kulmbach, Baden-Wrttemberg, Germany Zip: 95326 Sector: Biomass Product: Project...

  11. ENRO Geothermie AG | Open Energy Information

    Open Energy Info (EERE)

    ENRO Geothermie AG Jump to: navigation, search Name: ENRO Geothermie AG Place: Essen, North Rhine-Westphalia, Germany Zip: 45128 Sector: Geothermal energy Product: Geothermal...

  12. Novel visible-light AgBr/Ag?PO? hybrids photocatalysts with surface plasma resonance effects

    SciTech Connect (OSTI)

    Wang, Yunfang Li, Xiuli; Wang, Yawen; Fan, Caimei

    2013-06-01

    Three kinds of AgBr/Ag?PO? hybrids were synthesised via an anion-exchange precipitation method and characterised by XRD, XPS, SEM, EDS, and UVvis. The results showed that AgBr/Ag?PO? hybrids displayed much higher photocatalytic activities than single Ag?PO? or AgBr under visible light (?>420 nm), and OH and h? were the major active species during the degradation process. Considering interstitial ions Ag?? on lattice gap of AgBr are easy to become sliver particle, we deduced the possible photocatalytic mechanism could be ascribed to the synergistic effects of the appropriate valence band position of Ag?PO? and AgBr, surface plasmon resonance effect of Ag?, reactive radical species Br?, and the Ag vacancy on the surface of catalysts. - Graphical abstract: The optical absorption and structural morphology of the as-prepared AgBr@Ag?PO? photocatalyst using an anion-exchange precipitation method are conductive to the photocatalytic degradation of organics in water. Highlights: Novel AgBr/Ag?PO? hybrids are synthesised by a facile method. AgBr/Ag?PO? hybrids show excellent photocatalytic activities under visible light. Interstitial ions are in favour of the formation of Ag particle. Surface plasmon resonance effect plays a key factor for light absorption. The photocatalytic mechanism for AgBr/Ag?PO? hybrids is studied.

  13. Systaic AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Duesseldorf, North Rhine-Westphalia, Germany Zip: D-40213 Sector: Solar Product: Has developed and is installing a building-integrated PV roof, which can be used as...

  14. Sinosol AG | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Buys PV modules and solar passive systems in China and sells them in Europe. References: Sinosol AG1 This article is a stub. You can help OpenEI by expanding...

  15. Minority Banks | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Banks Minority Banks Our Bank Deposit Financial Assistance Program was developed for the purpose of strengthening and expanding the Nation's minority and women-owned small business enterprises. In order to classify as "minority" the institution's majority ownership must include African Americans, Hispanic Americans, Asian Americans, American Indians, Eskimos, Aleuts, and women. The minority institution must certify minority ownership with the Department of the Treasury and appear on

  16. Lake County Ag Park Greenhouse Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Ag Park Greenhouse Low Temperature Geothermal Facility Jump to: navigation, search Name Lake County Ag Park Greenhouse Low Temperature Geothermal Facility Facility Lake County Ag...

  17. Ag Fuels Ltd | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Ag Fuels Ltd Place: Sealy, Texas Product: 3.6Mgpl (13.6Mlpy) biodiesel producer in Sealy, Texas. References: Ag Fuels Ltd1 This article is a stub....

  18. AgPro | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: AgPro Place: Massena, New York Product: Operator of biodiesel plant based on soy. References: AgPro1 This article is a stub. You can help OpenEI...

  19. Payom Solar AG | Open Energy Information

    Open Energy Info (EERE)

    Payom Solar AG Jump to: navigation, search Name: Payom Solar AG Place: Merkendorf, Germany Zip: 91732 Product: Germany-based installer of roof-mounted PV plants, which also trades...

  20. MAN Ferrostaal AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: MAN Ferrostaal AG Place: Essen, Germany Zip: 45128 Sector: Solar Product: Germany-based firm that focuses on the development and realisation of...

  1. Sol e Suisse AG | Open Energy Information

    Open Energy Info (EERE)

    Suisse AG Jump to: navigation, search Name: Sol-e Suisse AG Place: Berne, Switzerland Zip: 25 Sector: Renewable Energy Product: Renewable energy division of BKW FMB Energy Ltd....

  2. SGL Carbon AG | Open Energy Information

    Open Energy Info (EERE)

    Carbon AG Jump to: navigation, search Name: SGL Carbon AG Place: Wiesbaden, Hessen, Germany Zip: 65203 Sector: Carbon Product: A Germany-based manufacturer of carbon-based products...

  3. AGS 20th anniversary celebration

    SciTech Connect (OSTI)

    Baggett, N.V.

    1980-05-22

    On May 22, 1980, a symposium was held at Brookhaven to celebrate the 20th birthday of the AGS, to recall its beginnings, and to review major discoveries that have been made with its beams. The talks at the symposium are recorded in this volume.

  4. Central Bank of India | Open Energy Information

    Open Energy Info (EERE)

    India Jump to: navigation, search Name: Central Bank of India Place: DELHI, Delhi (NCT), India Zip: 110002 Product: Retail bank closely conencted with social development through...

  5. European Investment Bank | Open Energy Information

    Open Energy Info (EERE)

    Logo: European Investment Bank Name: European Investment Bank Address: 98-100, boulevard Konrad Adenauer L-2950 Place: Luxembourg Product: Microfinance, Loans, Venture Capital...

  6. UCEAO: Energy Knowledge Bank | Open Energy Information

    Open Energy Info (EERE)

    UCEAO: Energy Knowledge Bank Jump to: navigation, search Name: UCEAO: Energy Knowledge Bank Place: Ohio Website: knowledgebank.uso.edu References: University Clean Energy Alliance...

  7. The Global Carbon Bank | Open Energy Information

    Open Energy Info (EERE)

    Global Carbon Bank Jump to: navigation, search Name: The Global Carbon Bank Place: Houston, Texas Zip: 77025 Sector: Carbon, Services Product: Houston-based provider of advisory...

  8. DB-Netz AG Offices

    High Performance Buildings Database

    Hamm, Germany The new office building for DB Netz AG was designed by the collaborative team of Architrav Architects and the Buildings Physics and Technical Building Services group of the University of Karlsruhe. The team developed an energy efficient building concept for the 64,304 sqft office building, located in Hamm, Germany. The design concept of the building is dominated by architectural solutions for ventilation, cooling and lighting. Use of HVAC and electric lighting is minimized as much as possible.

  9. Kevin Banks | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kevin Banks By Justin H.S. Breaux * October 6, 2014 Tweet EmailPrint Kevin Banks is a freshman at the Milwaukee School of Engineering, where he studies biomedical engineering. As an intern within the Chicago Scholars Argonne Future Research Program, Kevin conducted research this summer in Argonne's Energy Systems division. His research seeks to increase energy efficiency by reducing friction and wear on machines using engine oils. "What I liked most about my internship experience was

  10. Ag

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... within or outside the United States, bodily injury, sickness, disease, or death, or loss of or damage to ... of time, with interest at a rate determined by the Secretary of ...

  11. 3S Industries AG Formerly 3S Swiss Solar Systems AG | Open Energy...

    Open Energy Info (EERE)

    search Name: 3S Industries AG (Formerly 3S Swiss Solar Systems AG) Place: Bern, Switzerland Zip: CH-3006 Product: Swiss-based manufacturer of manual and semi-automatic PV...

  12. Energiedienst Holding AG EDH | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Energiedienst Holding AG (EDH) Place: Laufenburg, Switzerland Zip: 5080 Product: Utility active in Switzerland and Germany. Coordinates:...

  13. Sunseeker Energy Holding AG | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Sunseeker Energy Holding AG Place: Schindellegi, Switzerland Zip: 8834 Sector: Solar Product: Switzerland-based company seeking to developing...

  14. Ag Processing Inc AGP | Open Energy Information

    Open Energy Info (EERE)

    Nebraska Zip: 68103-2047 Product: Cooperative engaged in the procurement, processing, marketing, and transportation of grains and grain products. References: Ag Processing Inc....

  15. Husker Ag LLC | Open Energy Information

    Open Energy Info (EERE)

    search Name: Husker Ag LLC Place: Plainview, Nebraska Zip: 68769 Product: Bioethanol producer using corn as feedstock. Coordinates: 34.197675, -101.698139 Show Map...

  16. Getec AG Contracting | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Getec AG Contracting Place: Magdeburg, Saxony-Anhalt, Germany Zip: 39108 Sector: Efficiency Product: German Efficiency Service Company....

  17. 3C Holding AG | Open Energy Information

    Open Energy Info (EERE)

    am Main, Germany Zip: 61118 Sector: Services Product: 3C Holding AG develops trading strategies for EU allowances, JICDM Projects and climate neutral events, products...

  18. Energiecontracting Heidelberg AG ECH | Open Energy Information

    Open Energy Info (EERE)

    Baden-Wrttemberg, Germany Zip: 69126 Product: Consultancy specialised in local energy supply. References: Energiecontracting Heidelberg AG (ECH)1 This article is a...

  19. Bullith Batteries AG | Open Energy Information

    Open Energy Info (EERE)

    Batteries AG Place: Ismaning, Germany Zip: 85737 Product: Batteries producer using the lithium-polymer technology. Coordinates: 48.22727, 11.676305 Show Map Loading map......

  20. Solar Fabrik AG | Open Energy Information

    Open Energy Info (EERE)

    Zip: 79111 Product: Freiburg-based manufacturer of wafers, PV cells, modules and inverters, largely through acquisitions. References: Solar Fabrik AG1 This article is a...

  1. AG Plus Co operative | Open Energy Information

    Open Energy Info (EERE)

    Plus Co operative Jump to: navigation, search Name: AG Plus Co-operative Place: SE Kindred, North Dakota Zip: 58051 Product: Cooperative offering membership stock to agricultural...

  2. Unit Energy Europe AG | Open Energy Information

    Open Energy Info (EERE)

    Wind energy Product: Unit Energy develops and operates wind parks and hydroelectric power plants all across Europe. References: Unit Energy Europe AG1 This article is a stub....

  3. BGZ Beteiligungsgesellschaft Zukunftsenergien AG | Open Energy...

    Open Energy Info (EERE)

    Zukunftsenergien AG Place: Husum, Germany Zip: 25813 Sector: Solar, Wind energy Product: Finance and management holding, esp. for wind and solar projects....

  4. Inventux Technologies AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Steinhagen, Germany Zip: D-33803 Product: German manufacturer of micromorph tandem thin-film modules. Coordinates: 52.004606, 8.414257 Show Map Loading map......

  5. EnerVest AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: EnerVest AG Place: Mnchen, Germany Zip: 80538 Sector: Renewable Energy, Wind energy Product: EnerVest develops and manages renewable energy projects,...

  6. Denker Wulf AG | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Denker & Wulf AG Place: Sehestedt, Germany Zip: 24814 Sector: Wind energy Product: Wind project developer, also provides innovative wind energy financing....

  7. EnergieKontor AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: EnergieKontor AG Place: Bremen, Bremen, Germany Zip: 28359 Sector: Wind energy Product: Bremen-based european wind project developer and wind farm operator....

  8. TriWo AG | Open Energy Information

    Open Energy Info (EERE)

    TriWo AG Place: Trier, Denmark Zip: 54290 Sector: Solar Product: Developer of solar photovoltaic electricity generation project in Germany. Coordinates: 49.757256, 6.636521...

  9. ASP Aton Sunpower AG | Open Energy Information

    Open Energy Info (EERE)

    Zug, Switzerland Product: Zug-based project developer focused on the installaion of photovoltaic facilities. References: ASP Aton Sunpower AG1 This article is a stub. You can...

  10. Enginion AG insolvent | Open Energy Information

    Open Energy Info (EERE)

    (CHP) systems. The company's SteamCell product is targeted at the residential, automotive and portable power markets. References: Enginion AG (insolvent )1 This article is...

  11. MAMA Sustainable Incubation AG | Open Energy Information

    Open Energy Info (EERE)

    for emerging green-markets such as renewable energy, sustainable architecture and water treatment. References: MAMA Sustainable Incubation AG1 This article is a stub. You...

  12. Centrotherm Photovoltaics AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Blaubeuren, Germany Zip: 89143 Sector: Services Product: Provides turnkey manufacturing equipment for crystalline silicon PV cells, and Siemens reactors and engineering...

  13. LEONI Studer AG | Open Energy Information

    Open Energy Info (EERE)

    Studer AG Place: Daniken, Switzerland Zip: 4658 Product: Switzerland-based cable manufacturing firm. The firm also produces PV junction boxes. Coordinates: 50.966671, 5.85...

  14. SolarMarkt AG | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: SolarMarkt AG Place: Freiburg, Germany Zip: 79114 Product: A German PV installation company for small to mid-sized projects and BIPV. References:...

  15. Pegasus Energietechnik AG | Open Energy Information

    Open Energy Info (EERE)

    AG Place: Mhldorf am Inn, Germany Zip: 84453 Sector: Renewable Energy Product: Germany-based renewable energy developer assisting with projects in Europe. References:...

  16. Stangl Semiconductor Equipment AG | Open Energy Information

    Open Energy Info (EERE)

    German manufacturer of wet chemistry systems for processing silicon and thin-film solar cells. References: Stangl Semiconductor Equipment AG1 This article is a stub. You...

  17. Republic of Macedonia-World Bank Climate Projects | Open Energy...

    Open Energy Info (EERE)

    World Bank Climate Projects Jump to: navigation, search Name Republic of Macedonia-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy, Land Focus...

  18. Gabon-World Bank Climate Activities | Open Energy Information

    Open Energy Info (EERE)

    World Bank Climate Activities Jump to: navigation, search Name Gabon-World Bank Climate Activities AgencyCompany Organization World Bank Sector Land Focus Area Forestry Topics...

  19. Ukraine-World Bank Climate Projects | Open Energy Information

    Open Energy Info (EERE)

    World Bank Climate Projects Jump to: navigation, search Name Ukraine-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy Focus Area Energy Efficiency...

  20. EA-261 UBS AG, London Branch | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-261 UBS AG, London Branch Order authorizing UBS AG, London Branch to export electric energy to Mexico. PDF icon EA-261 UBS AG, London Branch More Documents & Publications EA-184 ...

  1. EA-263 UBS AG, London Branch | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-263 UBS AG, London Branch Order authorizing UBS AG, London Branch to export electric energy to Mexico. PDF icon EA-263 UBS AG, London Branch More Documents & Publications EA-232 ...

  2. Visible light driven photocatalysis and antibacterial activity of AgVO{sub 3} and Ag/AgVO{sub 3} nanowires

    SciTech Connect (OSTI)

    Singh, Anamika; Dutta, Dimple P.; Ballal, A.; Tyagi, A.K.; Fulekar, M.H.

    2014-03-01

    Graphical abstract: - Highlights: Ag/AgVO{sub 3} and pure AgVO{sub 3} nanowires synthesized by sonochemical process. Characterization done using XRD, SEM, TEM, EDX and BET analysis. Visible light degradation of RhB by Ag/AgVO{sub 3} within 45 min. Antibacterial activity of Ag/AgVO{sub 3} demonstrated. - Abstract: Ag/AgVO{sub 3} nanowires and AgVO{sub 3} nanorods were synthesized in aqueous media via a facile sonochemical route. The as-synthesized products were characterized by X-ray diffraction, BrunauerEmmettTeller surface area analysis, scanning electron microscopy together with an energy dispersion X-ray spectrum analysis, transmission electron microscopy and UVvis diffuse reflectance spectroscopy. The results revealed that inert atmosphere promotes the formation of Ag/AgVO{sub 3} nanowires. The photocatalytic studies revealed that the Ag/AgVO{sub 3} nanowires exhibited complete photocatalytic degradation of Rhodamine B within 45 min under visible light irradiation. The antibacterial activity of Ag/AgVO{sub 3} nanowires was tested against Escherechia coli and Bacillus subtilis. The minimum growth inhibitory concentration value was found to be 50 and 10 folds lower than for the antibiotic ciprofloxacin for E. coli and B. subtilis, respectively. The antibacterial properties of the ?-AgVO{sub 3} nanorods prove that in case of the Ag dispersed Ag/AgVO{sub 3} nanowires, the enhanced antibacterial action is also due to contribution from the AgVO{sub 3} support.

  3. Select Bank Plc | Open Energy Information

    Open Energy Info (EERE)

    Bank Plc Jump to: navigation, search Name: Select Bank Plc Place: Mayfair, England, United Kingdom Zip: W1J 8LQ Sector: Renewable Energy Product: England-based firm that promotes...

  4. Gamesa Energie Deutschland formerly EBV Management Holding AG...

    Open Energy Info (EERE)

    Energie Deutschland formerly EBV Management Holding AG Jump to: navigation, search Name: Gamesa Energie Deutschland (formerly EBV Management Holding AG) Place: Oldenburg, Germany...

  5. RENERCO Renewable Energy Concepts AG | Open Energy Information

    Open Energy Info (EERE)

    RENERCO Renewable Energy Concepts AG Jump to: navigation, search Name: RENERCO Renewable Energy Concepts AG Place: Munich, Germany Zip: D-80336 Sector: Renewable Energy Product:...

  6. Alpen Adria Energie AG AAE | Open Energy Information

    Open Energy Info (EERE)

    Alpen Adria Energie AG AAE Jump to: navigation, search Name: Alpen Adria Energie AG (AAE) Place: Ktschach Mauthen, Austria Zip: 9640 Sector: Renewable Energy Product: Utility...

  7. GATE Global Alternative Energy Holding AG | Open Energy Information

    Open Energy Info (EERE)

    Energy Holding AG Place: Wrzburg, Bavaria, Germany Zip: 97080 Product: Germany-based biodiesel producer. References: GATE Global Alternative Energy Holding AG1 This article...

  8. European Energy Exchange AG EEX | Open Energy Information

    Open Energy Info (EERE)

    Energy Exchange AG EEX Jump to: navigation, search Name: European Energy Exchange AG (EEX) Place: Leipzig, Germany Zip: D-04109 Product: Germany's energy exchange, which aims to...

  9. Mepsolar AG aka Munich Energy Partners | Open Energy Information

    Open Energy Info (EERE)

    AG aka Munich Energy Partners Jump to: navigation, search Name: Mepsolar AG (aka Munich Energy Partners) Place: Munich, Germany Zip: 81829 Product: Develops utility scale PV...

  10. EA-342 Royal Bank of Canada | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon EA-342 Royal Bank of Canada More Documents & Publications EA-342-A Royal Bank of Canada EA-330 The Royal Bank of Scotland plc EA-330-A The Royal Bank of Scotland plc

  11. E ON AG | Open Energy Information

    Open Energy Info (EERE)

    E.ON AG Place: Dusseldorf, North Rhine-Westphalia, Germany Zip: 40479 Sector: Renewable Energy Product: Dusseldorf-based company that operates as a public utility in the...

  12. Solar Power Partners AG | Open Energy Information

    Open Energy Info (EERE)

    Solar Product: Small Solar project developer with projects located in South Africa and France. References: Solar Power Partners AG1 This article is a stub. You can help OpenEI by...

  13. Bos ten AG | Open Energy Information

    Open Energy Info (EERE)

    Place: Regensburg-Westenviertel, Germany Zip: 93049 Sector: Solar Product: Partner of Beck Energy in development of a 3.2MW solar PV plant. References: Bos.ten AG1 This article...

  14. Multi Contact AG | Open Energy Information

    Open Energy Info (EERE)

    firm in the field of renewable energy, produces Solarline - connector systems for photovoltaics. References: Multi-Contact AG1 This article is a stub. You can help OpenEI by...

  15. AG Land 1 | Open Energy Information

    Open Energy Info (EERE)

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 42.145531, -93.432161 Show Map Loading map... "minzoom":false,"mappings...

  16. AG Land 4 | Open Energy Information

    Open Energy Info (EERE)

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 42.206397, -93.325714 Show Map Loading map... "minzoom":false,"mappings...

  17. AG Land 2 | Open Energy Information

    Open Energy Info (EERE)

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 41.904231, -93.354864 Show Map Loading map... "minzoom":false,"mappings...

  18. AG Land 3 | Open Energy Information

    Open Energy Info (EERE)

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 42.146061, -93.428028 Show Map Loading map... "minzoom":false,"mappings...

  19. Sputnik Engineering AG | Open Energy Information

    Open Energy Info (EERE)

    Zip: CH-2502 Sector: Solar Product: Manufacturer of SolarMax grid tie inverters for photovoltaic applications. References: Sputnik Engineering AG1 This article is a stub. You can...

  20. SES 21 AG | Open Energy Information

    Open Energy Info (EERE)

    Place: OderdingPolling, Germany Zip: 82398 Sector: Solar Product: A distributor of photovoltaic and solar thermal systems in Germany. References: SES 21 AG1 This article is a...

  1. SolarTec AG | Open Energy Information

    Open Energy Info (EERE)

    SolarTec AG Place: Munich, Bavaria, Germany Product: Developing a technology it calls Sol*Con- 700x Fresnel concentrators for use with gallium arsenide or germanium cells, also...

  2. City Solar AG | Open Energy Information

    Open Energy Info (EERE)

    services for large-scale PV power plants, also has a division called City Solar Invest to develop its own plants. References: City Solar AG1 This article is a stub. You...

  3. High intensity performance and upgrades at the Brookhaven AGS (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect performance and upgrades at the Brookhaven AGS Citation Details In-Document Search Title: High intensity performance and upgrades at the Brookhaven AGS Upgrades to the Brookhaven AGS are described. The AGS Booster which delivers proton beams of 1.5-1.9 GeV and the 200 MeV linac facilities are described. Space charge and beam emittance characteristics are discussed. (AIP) Authors: Roser, Thomas [1] + Show Author Affiliations AGS Department, Brookhaven National

  4. Investing in Minority Banks | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Investing in Minority Banks Investing in Minority Banks Our Bank Deposit Financial Assistance Program was developed for the purpose of strengthening and expanding the Nation's minority and women-owned small business enterprises. In order to classify as "minority" the institution's majority ownership must include African Americans, Hispanic Americans, Asian Americans, American Indians, Eskimos, Aleuts, and women. The minority institution must certify minority ownership with the

  5. Bank of America | Open Energy Information

    Open Energy Info (EERE)

    America Jump to: navigation, search Name: Bank of America Place: Charlotte, NC Zip: 28202 Website: www.bankofamerica.com References: NREL & Industry: National Account Companies1...

  6. Intern Spotlight: Kevin Banks | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kevin Banks is a freshman at the Milwaukee School of Engineering, where he studies biomedical engineering. As an intern within the Chicago Scholars Argonne Future Research...

  7. The World Bank - Transport | Open Energy Information

    Open Energy Info (EERE)

    provides relevant information about transport, focusing on The World Bank Transport Strategy - Safe, Clean and Affordable - Transport for Development. The website includes...

  8. Building Green in Greensburg: Greensburg State Bank

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing Greensburg State Bank building in Greensburg, Kansas.

  9. Building Green in Greensburg: Centera Bank

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing Centera Bank building in Greensburg, Kansas.

  10. Building Green in Greensburg: The Peoples Bank

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing Peoples Bank building in Greensburg, Kansas.

  11. NY Green Bank | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    sector to address and alleviate market and financial barriers preventing a thriving clean energy marketplace. NY Green Bank does not accept deposits or offer retail loans, and...

  12. Ag on Si(111) from basic science to application

    SciTech Connect (OSTI)

    Belianinov, Aleksey

    2012-04-04

    In our work we revisit Ag and Au adsorbates on Si(111)-7x7, as well as experiment with a ternary system of Pentacene, Ag and Si(111). Of particular interest to us is the Si(111)-({radical}3x{radical}3)R30{degree}Ag (Ag-Si-{radical}3 hereafter). In this thesis I systematically e plore effects of Ag deposition on the Ag-Si-{radical}3 at different temperatures, film thicknesses and deposition fluxes. The generated insight of the Ag system on the Si(111) is then applied to generate novel methods of nanostructuring and nanowire growth. I then extend our expertise to the Au system on the Ag-Si(111) to gain insight into Au-Si eutectic silicide formation. Finally we explore behavior and growth modes of an organic molecule on the Ag-Si interface.

  13. PIA - Form EIA-475 A/G Residential Energy Consumption Survey...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Form EIA-475 AG Residential Energy Consumption Survey PIA - Form EIA-475 AG Residential Energy Consumption Survey PIA - Form EIA-475 AG Residential Energy Consumption Survey PDF ...

  14. Template synthesis of Ag/AgCl microrods and their efficient visible light-driven photocatalytic performance

    SciTech Connect (OSTI)

    Chen, Hua; Xiao, Liang; Huang, Jianhua

    2014-09-15

    Highlights: Preparation ofAg/AgCl microrods by reaction of Ag{sub 2}WO{sub 4} microrods with NaCl solution. Generation of metallic Ag is induced by the ambient light in the synthesis process. Ag/AgCl shows excellent visible light-driven photodegradation of organic dyes. - Abstract: Ag/AgCl microrods, aggregated by nanoparticles with a diameter ranging from 100 nm to 2 ?m, were prepared by an ion-exchange reaction at 80 C between Ag{sub 2}WO{sub 4} template and NaCl solution. The existence of metallic Ag species was confirmed by XRD, DRS and XPS measurements. Ag/AgCl microrods showed excellent photocatalytic activity for the degradation of rhodamine B and methylene blue under visible light irradiation. The degradation rate constants of rhodamine B and methylene blue are 0.176 and 0.114 min{sup ?1}, respectively. The cycling photodegradation experiments suggest that Ag/AgCl microds could be employed as stable plasmonic photocatalysts for the degradation of organic dyes under visible light irradiation.

  15. RESIDENTIAL NETWORK MEMBERS UNITE TO FORM GREEN BANK NETWORK | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy RESIDENTIAL NETWORK MEMBERS UNITE TO FORM GREEN BANK NETWORK RESIDENTIAL NETWORK MEMBERS UNITE TO FORM GREEN BANK NETWORK The NY Green Bank logo. Residential Network members Connecticut Green Bank and NY Green Bank, a division of Residential Network member New York State Energy Research and Development Authority, have helped launch the Green Bank Network, a new international organization focused on collaborating to scale up private financing to meet the challenge of climate change.

  16. AgFe Management Ltd | Open Energy Information

    Open Energy Info (EERE)

    AgFe Management Ltd Jump to: navigation, search Name: AgFe Management Ltd Place: London, England, United Kingdom Zip: W11 1QF Product: London-based, Financial Asset Management and...

  17. SiC Processing AG | Open Energy Information

    Open Energy Info (EERE)

    SiC Processing AG Jump to: navigation, search Name: SiC Processing AG Place: Hirschau, Germany Zip: 92242 Sector: Solar Product: Offers management and recycling of slurry for solar...

  18. Organic pollutant photodecomposition by Ag/KNbO3 nanocomposites...

    Office of Scientific and Technical Information (OSTI)

    In this study, Ag nanoparticles supported on well-defined perovskite orthorhombic KNbO3 ... slab models of KNbO3 (101) are employed to mimic large supportedmore Ag nanoparticles. ...

  19. S R Biogas Energiesysteme AG | Open Energy Information

    Open Energy Info (EERE)

    Energiesysteme AG Jump to: navigation, search Name: S&R Biogas Energiesysteme AG Place: Frankfurt am Main, Hessen, Germany Zip: 60598 Product: S&R Biogas Energiesysteme is a biogas...

  20. E ON Energy from Waste AG | Open Energy Information

    Open Energy Info (EERE)

    from Waste AG Jump to: navigation, search Name: E.ON Energy from Waste AG Place: Helmstedt, Lower Saxony, Germany Zip: 38350 Product: Lower Saxony-based E.ON subsidiary is the...

  1. Ag@AgHPW as a plasmonic catalyst for visible-light photocatalytic degradation of environmentally harmful organic pollutants

    SciTech Connect (OSTI)

    Zhou, Wenhui; Cao, Minhua Li, Na; Su, Shuangyue; Zhao, Xinyu; Wang, Jiangqiang; Li, Xianghua; Hu, Changwen

    2013-06-01

    Graphical abstract: Ag@Ag{sub x}H{sub 3?x}PW12O40 (Ag@AgHPW) nanoparticles (NPs), a new visible-light driven plasmonic photocatalyst, are prepared by a green photoreduction strategy without the addition of any surfactant, which show a high activity and stability for the degradation of methyl blue (MB) under visible light irradiation. - Highlights: A new visible-light driven photocatalyst Ag@Ag{sub x}H{sub 3?x}PW{sub 12}O{sub 40} was designed. The photocatalyst shows a high activity for the degradation of methyl blue. The high activity can be ascribed to the synergy of photoexcited AgHPW and Ag. - Abstract: Ag@Ag{sub x}H{sub 3?x}PW{sub 12}O{sub 40} (Ag@AgHPW) nanoparticles (NPs), a new visible-light driven plasmonic photocatalyst, are prepared by a green photoreduction strategy without the addition of any surfactant. They show strong absorption in the visible region because of the localized surface plasmon resonance (LSPR) of Ag NPs. This plasmonic photocatalyst shows a high activity and stability for the degradation of methyl blue (MB) under visible light irradiation, which could be attributed to the highly synergy of photoexcited Ag{sub x}H{sub 3?x}PW{sub 12}O{sub 40} (AgHPW) and plasmon-excited Ag NPs and the confinement effects at interfaces between polyoxometalates (POMs) and silver. POM anions have redox ability and high photocatalytic activity, whereas Ag NPs could effectively accelerate the separation of electrons and holes, both of which contribute to their high activity.

  2. PNC Bank Equipment Finance and Energy Group | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: PNC Bank - Equipment Finance and Energy Group Place: Valencia, California Zip: 91355 Product: Energy and Equipment Finance arm of PNC Bank...

  3. India-World Bank Climate Projects | Open Energy Information

    Open Energy Info (EERE)

    Name India-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy, Land Focus Area Energy Efficiency, Renewable Energy Topics Background analysis...

  4. Philippines-World Bank Climate Projects | Open Energy Information

    Open Energy Info (EERE)

    Philippines-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy, Land Focus Area Renewable Energy, Energy Efficiency, Geothermal Topics Background...

  5. World Bank-Climate Change Knowledge Portal | Open Energy Information

    Open Energy Info (EERE)

    Climate Change Knowledge Portal Jump to: navigation, search Logo: World Bank-Climate Change Knowledge Portal Name World Bank-Climate Change Knowledge Portal AgencyCompany...

  6. Global Climate Change: Risk to Bank Loans | Open Energy Information

    Open Energy Info (EERE)

    Risk to Bank Loans Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Climate Change: Risk to Bank Loans AgencyCompany Organization: United Nations...

  7. Colorado State Bank and Trust | Open Energy Information

    Open Energy Info (EERE)

    Bank and Trust Jump to: navigation, search Name: Colorado State Bank and Trust Place: Denver, Colorado Zip: 80202 Sector: Renewable Energy Product: Leasing and lending for...

  8. LNJ Bhilwara Group Glitnir Bank JV | Open Energy Information

    Open Energy Info (EERE)

    - Glitnir Bank JV Place: Noida, India Zip: 201 301 Sector: Geothermal energy Product: Joint venture established by LNJ Bhilwara Group and Glitnir Bank, for the development of...

  9. RESIDENTIAL NETWORK MEMBERS UNITE TO FORM GREEN BANK NETWORK...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Network members Connecticut Green Bank and NY Green Bank, a division of Residential Network member New York State Energy Research and Development Authority, have helped ...

  10. Georgia-World Bank Climate Projects | Open Energy Information

    Open Energy Info (EERE)

    Projects Jump to: navigation, search Name Georgia-World Bank Climate Projects AgencyCompany Organization World Bank Focus Area Renewable Energy, Hydro Topics Background analysis...

  11. High intensity beam operation of the Brookhaven AGS (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect beam operation of the Brookhaven AGS Citation Details In-Document Search Title: High intensity beam operation of the Brookhaven AGS For the last few years the Brookhaven AGS has operated at record proton intensities. This high beam intensity allowed for the simultaneous operation of several high precision rare kaon decay experiments. The record beam intensities were achieved after the AGS Booster was commissioned and a transition jump system, a powerful transverse damper, and

  12. Enhanced thermal stability of Ag nanorods through capping

    SciTech Connect (OSTI)

    Bachenheimer, Lou; Elliott, Paul; Stagon, Stephen; Huang, Hanchen

    2014-11-24

    Ag nanorods may serve as sensors in the detection of trace amounts of chemical agents, even single molecules, through surface enhanced Raman spectroscopy (SERS). However, thermal coarsening of Ag nanorods near room temperature limits their applications. This letter proposes the use of a thin oxide capping layer to enhance the thermal stability of Ag nanorods beyond 100?C. Using electron microscopy characterization and SERS tests, the authors show that the proposed method is effective in stabilizing both morphology and sensitivity of Ag nanorods. The results of this work extend the applicability of Ag nanorods as chemical sensors to higher temperatures.

  13. High intensity proton operation at the Brookhaven AGS accelerator complex

    SciTech Connect (OSTI)

    Ahrens, L.A.; Blaskiewicz, M.; Bleser, E.; Brennan, J.M.; Gardner, C.; Glenn, J.W.; Onillon, E.; Reece, R.K.; Roser, T.; Soukas, A.

    1994-08-01

    With the completion of the AGS rf upgrade, and the implementation of a transition {open_quotes}jump{close_quotes}, all of accelerator systems were in place in 1994 to allow acceleration of the proton intensity available from the AGS Booster injector to AGS extraction energy and delivery to the high energy users. Beam commissioning results with these new systems are presented. Progress in identifying and overcoming other obstacles to higher intensity are given. These include a careful exploration of the stopband strengths present on the AGS injection magnetic porch, and implementation of the AGS single bunch transverse dampers throughout the acceleration cycle.

  14. Employees give to local food bank

    Broader source: Energy.gov [DOE]

    Employees in DOE's Oak Ridge Office of EM donated 3,209 pounds of food to the Second Harvest Food Bank of East Tennessee. The donation was part of the national Feds Feed Families campaign.

  15. The DOE/DOD Environmental Data Bank

    SciTech Connect (OSTI)

    C de Baca, J.E.

    1996-07-01

    The DOE/DOD Environmental Data Bank was established in 1959 as a central location for storing weapons and equipment environments information from a variety of DOE, DOD, and industrial sources and continues to be maintained by Sandia National Laboratories. The Environmental Data Bank contains approximately 2,900 documents regarding normal and abnormal environments that describe the handling, storage, transportation, use, and general phases, which occur during the life of a weapon system. The Environmental Data Bank contains a vast assortment of resources that document crash, fire, and chemical environments resulting from aircraft, rail, ship, and truck accidents, as well as crash and thermal tests conducted on shipping containers. Also included are studies on the hazards of exposure to liquid natural gas fireballs, chemical fireballs, and hydrogen fireballs. This paper describes the DOE/DOD Environmental Data Bank system, its structure, data sources, and usage, with particular emphasis on its use for safety assessments at Sandia National Laboratories.

  16. Atomic oxygen flux determined by mixed-phase Ag/Ag2O deposition

    SciTech Connect (OSTI)

    Kaspar, Tiffany C.; Droubay, Timothy C.; Chambers, Scott A.

    2010-11-01

    The flux of atomic oxygen generated in a electron cyclotron resonance (ECR) microwave plasma source was quantified by two different methods. The commonly applied approach of monitoring the frequency change of a silver-coated quartz crystal microbalance (QCM) deposition rate monitor as the silver is oxidized was found to underestimate the atomic oxygen flux by an order of magnitude compared to a more direct deposition approach. In the mixed-phase Ag/Ag2O deposition method, silver films were deposited in the presence of the plasma such that the films were partially oxidized to Ag2O; x-ray photoelectron spectroscopy (XPS) was utilized for quantification of the oxidized fraction. The inaccuracy of the QCM oxidation method was tentatively attributed to efficient catalytic recombination of O atoms on the silver surface.

  17. Double dumbbell shaped AgNi alloy by pulsed electrodeposition

    SciTech Connect (OSTI)

    Dhanapal, K.; Vasumathi, M.; Santhi, Kalavathy; Narayanan, V. Stephen, A.

    2014-01-28

    Silver-Nickel is the well-known thermally immiscible system that makes them quite complex for the formation of alloy. This kind of alloy can be attained from electrodeposition method. In the present work, AgNi alloy was synthesized by pulsed electrodeposition in a single bath two electrode system with the use of anodic alumina membrane. The prepared AgNi alloy and pure Ag were characterized with X-ray Diffraction (XRD) for structural confirmation, Scanning Electron Microscopy (SEM) for morphological, and magnetic properties by Vibrating Sample Magnetometer, respectively. The X-ray Diffraction study shows the formation of cubic structure for pure Ag. SEM analysis reveals the double dumbbell morphology for AgNi alloy and spherically agglomeration for pure silver. Hysteresis behaviour from VSM measurement indicates that the AgNi alloy have good ferro-magnetic properties.

  18. METAL MEDIA FILTERS, AG-1 SECTION FI

    SciTech Connect (OSTI)

    Adamson, D.

    2012-05-23

    One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures, media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, data was lacking to complete an AG-1 FI Standard on metal media. With funding secured by Mississippi State University (MSU) from National Nuclear Security Administration (NNSA), a research test stand is being designed and fabricated at MSU's Institute for Clean Energy Technology (ICET) Facility to obtain qualification data on metal media. This in turn will support required data needed for the FI Standard. The paper will discuss in detail how the test stand at MSU will obtain the necessary data to complete the FI Standard.

  19. Solaxis GmbH Regetec Handels AG | Open Energy Information

    Open Energy Info (EERE)

    Zip: 47475 Sector: Solar Product: Distributor and installer of photovoltaic modules and solar heating systems. References: Solaxis GmbH (Regetec Handels AG)1 This article is a...

  20. Theoretical study of Ag- and Au-filled skutterudites.

    Broader source: Energy.gov [DOE]

    Uses ab initio atomistic DFT modeling as implemented in VASP to determine theoretical values of thermoelectric properties for Ag-filled skutterudites.

  1. EPURON GmbH formerly Voltwerk AG | Open Energy Information

    Open Energy Info (EERE)

    EPURON GmbH (formerly Voltwerk AG) Place: Hamburg, Germany Zip: 20537 Sector: Solar, Wind energy Product: Develops, finances, implements and operates solar, wind and biogas...

  2. Schnell Z ndstrahlmotoren AG Co KG | Open Energy Information

    Open Energy Info (EERE)

    Zndstrahlmotoren is specialized on the production of dual fuel engines (CHPs) for biogas, dump and sewage gas. References: Schnell Zndstrahlmotoren AG & Co. KG1 This...

  3. EnviTec Biogas AG | Open Energy Information

    Open Energy Info (EERE)

    EnviTec Biogas AG Place: Saerbeck, North Rhine-Westphalia, Germany Zip: 48369 Product: Plans, finances, installs and commissions biogas systems including technical and biological...

  4. Proton Radiography at the AGS (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Proton Radiography at the AGS Authors: Saunders, Alexander 1 + Show Author Affiliations Los Alamos National Laboratory Los Alamos ...

  5. Ag/AgBr/g-C{sub 3}N{sub 4}: A highly efficient and stable composite photocatalyst for degradation of organic contaminants under visible light

    SciTech Connect (OSTI)

    Cao, Jing; Zhao, Yijie; Lin, Haili; Xu, Benyan; Chen, Shifu

    2013-10-15

    Graphical abstract: Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts displayed excellent photocatalytic activities on the degradation of methyl orange (MO) under visible light. The improved photocatalytic performance and stability of Ag/AgBr/g-C{sub 3}N{sub 4} originated from the synergetic effects of AgBr/g-C{sub 3}N{sub 4} interface and metallic Ag nanoparticles. O{sub 2}?, one of the reactive species, was responsible for the photodegradation of MO compared to H+ and OH. - Highlights: Novel Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalyst was reported. Ag/AgBr/g-C{sub 3}N{sub 4} had novel energy band combination between AgBr and g-C{sub 3}N{sub 4}. Synergetic effects of AgBr/g-C{sub 3}N{sub 4} interface and metallic Ag nanoparticles. Electron trapping role of metallic Ag dominated the stability of Ag/AgBr/g-C{sub 3}N{sub 4}. - Abstract: Novel Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts were constructed via depositionprecipitation method and extensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and UVvis diffuse reflectance spectroscopy (DRS). Under visible light (? > 420 nm), Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts displayed much higher photocatalytic activities than those of Ag/AgBr and g-C{sub 3}N{sub 4} for degradation of methyl orange (MO). 50% Ag/AgBr/g-C{sub 3}N{sub 4} presented the best photocatalytic performance, which was mainly attributed to the synergistic effects of AgBr/g-C{sub 3}N{sub 4} interface and the in situ metallic Ag nanoparticles for efficiently separating electronhole pairs. Furthermore, Ag/AgBr/g-C{sub 3}N{sub 4} remained good photocatalytic activity through 5 times of cycle experiments. Additionally, the radical scavengers experiment indicated that O{sub 2}{sup ?} was the main reactive species for the MO degradation under visible light.

  6. EECH Group AG formerly European Energy Consult Holding P T Technology...

    Open Energy Info (EERE)

    EECH Group AG formerly European Energy Consult Holding P T Technology AG Jump to: navigation, search Name: EECH Group AG (formerly European Energy Consult Holding, P&T Technology...

  7. World Bank Good Practice Guidelines: Financial Analysis of Revenue...

    Open Energy Info (EERE)

    AgencyCompany Organization: World Bank Topics: Finance Resource Type: Guidemanual Website: siteresources.worldbank.orgINTRANETFINANCIALMGMTResourcesFMB-Notes...

  8. Intruder states in odd-mass Ag isotopes

    SciTech Connect (OSTI)

    Rogowski, J.; Alstad, J.; Brant, S.; Daniels, W.R.; De Frenne, D.; Heyde, K.; Jacobs, E.; Kaffrell, N.; Paar, V.; Skarnemark, G.; Trautmann, N. (Institut fuer Kernchemie, Universitaet Mainz, D-6500 Mainz (Federal Republic of Germany) Department of Chemistry, University of Oslo, N-0315 Oslo (Norway) Prirodoslovno-matematicki fakultet, University of Zagreb, 41000 Zagreb (Yugoslavia) Los Alamos National Laboratory, Los Alamos, NM (USA) Laboratorium voor Kernfysica, Proeftuinstraat 86, B-9000 Gent (Belgium) Department of Nuclear Chemistry, Chalmers University of Technology, S-41296 Goeteborg (Sweden))

    1990-12-01

    The information on the coexistence of deformed intruder states and normal spherical hole-core coupled states in odd-mass Ag nuclei has been extended to the neutron-rich isotopes {sup 113}Ag{sub 66} and {sup 115}Ag{sub 68}. Data have been obtained from an investigation of the {gamma} rays following the {beta}{sup {minus}} decay of the {sup 113,115}Pd precursors. A minimum for the excitation energy of the intruder states occurs in {sup 113}Ag{sub 66}, exactly at neutron midshell. The properties of the intruder states in {sup 109,111,113,115}Ag are discussed and a description in the framework of the interacting-boson-fermion model is presented.

  9. Banking on Solar: An Analysis of Banking Opportunities in the U.S. Distributed Photovoltaic Market

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Banking on Solar: An Analysis of Banking Opportunities in the U.S. Distributed Photovoltaic Market David Feldman and Travis Lowder National Renewable Energy Laboratory Technical Report NREL/TP-6A20-62605 November 2014 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL) at

  10. Phoenix Solar AG formerly Phoenix SonnenStrom | Open Energy Informatio...

    Open Energy Info (EERE)

    Solar AG formerly Phoenix SonnenStrom Jump to: navigation, search Name: Phoenix Solar AG (formerly Phoenix SonnenStrom) Place: Sulzemoos, Germany Zip: 85254 Product: Develops...

  11. Synthesis and photocatalytic performance of an efficient Ag@AgBr/K{sub 2}Ti{sub 4}O{sub 9} composite photocatalyst under visible light

    SciTech Connect (OSTI)

    Liang, Yinghua; Lin, Shuanglong; Liu, Li; Hu, Jinshan; Cui, Wenquan

    2014-08-15

    Highlights: The plasmatic Ag@AgBr sensitized K{sub 2}Ti{sub 4}O{sub 9} composite photocatalysts. Ag@AgBr greatly increased visible light absorption for K{sub 2}Ti{sub 4}O{sub 9}. The plamonic photocatalysts exhibited enhanced activity for the degradation of RhB. - Abstract: Ag@AgBr nanoparticle-sensitized K{sub 2}Ti{sub 4}O{sub 9} composite photocatalysts (Ag@AgBr/K{sub 2}Ti{sub 4}O{sub 9}) were prepared by a facile precipitationphotoreduction method. The photocatalytic activities of the Ag@AgBr/K{sub 2}Ti{sub 4}O{sub 9} nanocomposites were evaluated for photocatalytic degradation of (RhB) under visible light irradiation. The composites exhibited excellent visible light absorption, which was attributable to the surface plasmon effect of Ag nanoparticles. The Ag@AgBr was uniformly scattered on the surface of K{sub 2}Ti{sub 4}O{sub 9} and possessed sizes in the range of 2050 nm. The loading amount of Ag@AgBr was also studied, and was found to influence the absorption spectra of the resulting composites. Approximately 95.9% of RhB was degraded by Ag@AgBr (20 wt.%)/K{sub 2}Ti{sub 4}O{sub 9} after irradiation for 1 h. The stability of the material was also investigated by performing consecutive runs. Additionally, studies performed using radical scavengers indicated that O{sub 2}{sup ?} and Br{sup 0} acted as the main reactive species. Based on the experimental results, a photocatalytic mechanism for organics degradation over Ag@AgBr/K{sub 2}Ti{sub 4}O{sub 9} photocatalysts was proposed.

  12. Work Function Reduction by BaO: Growth of Crystalline Barium Oxide on Ag(001) and Ag(111) Surfaces

    SciTech Connect (OSTI)

    Droubay, Timothy C.; Kong, Lingmei; Chambers, Scott A.; Hess, Wayne P.

    2015-02-01

    Ultrathin films of barium oxide were grown on Ag(001) and Ag(111) using the evaporation of Ba metal in an O2 atmosphere by molecular beam epitaxy. Ultraviolet photoemission spectroscopy reveals that films consisting of predominantly BaO or BaO2 result in Ag(001) work function reductions of 1.74 eV and 0.64 eV, respectively. On the Ag(001) surface, Ba oxide growth is initiated by two-dimensional nucleation of epitaxial BaO, followed by a transition to three-dimensional dual-phase nucleation of epitaxial BaO and BaO2. Three-dimensional islands of primarily BaO2(111) nucleate epitaxially on the Ag(111) substrate leaving large patches of Ag uncovered. We find no indication of chemical reaction or charge transfer between the films and the Ag substrates. These data suggest that the origin of the observed work function reduction is largely due to a combination of BaO surface relaxation and an electrostatic compressive effect.

  13. Otter Tail Ag Enterprises LLC | Open Energy Information

    Open Energy Info (EERE)

    Enterprises LLC Jump to: navigation, search Name: Otter Tail Ag Enterprises LLC Place: Fergua Falls, Minnesota Zip: 56537-7518 Product: Developed a 55m gallon ethanol facility in...

  14. PVA TePla AG | Open Energy Information

    Open Energy Info (EERE)

    search Name: PVA TePla AG Place: Asslar, Germany Zip: 35614 Product: Supplier of plants and equipment for vacuum systems, crystal-growing systems and plasma systems, some of...

  15. SFC Smart Fuel Cell AG | Open Energy Information

    Open Energy Info (EERE)

    Zip: D-85649 Product: Smart Fuel Cell designs, develops and manufactures direct methanol fuel cell systems. References: SFC Smart Fuel Cell AG1 This article is a stub. You...

  16. Half-life determination for {sup 108}Ag and {sup 110}Ag

    SciTech Connect (OSTI)

    Zahn, Guilherme S.; Genezini, Frederico A.

    2014-11-11

    In this work, the half-life of the short-lived silver radionuclides {sup 108}Ag and {sup 110}Ag were measured by following the activity of samples after they were irradiated in the IEA-R1 reactor. The results were then fitted using a non-paralizable dead time correction to the regular exponential decay and the individual half-life values obtained were then analyzed using both the Normalized Residuals and the Rajeval techniques, in order to reach the most exact and precise final values. To check the validity of dead-time correction, a second correction method was also employed by means of counting a long-lived {sup 60}Co radioactive source together with the samples as a livetime chronometer. The final half-live values obtained using both dead-time correction methods were in good agreement, showing that the correction was properly assessed. The results obtained are partially compatible with the literature values, but with a lower uncertainty, and allow a discussion on the last ENSDF compilations' values.

  17. Phase diagrams of the Tb-Ag-In and Dy-Ag-In systems at 870 K

    SciTech Connect (OSTI)

    Demchyna, M.; Belan, B.; Manyako, M.; Pietraszko, A.; Kalychak, Ya.

    2012-08-15

    The phase equilibria of Tb-Ag-In and Dy-Ag-In ternary systems have been studied at 870 K in the whole concentration range by means of X-ray powder, single crystal X-ray diffraction and EDX analyses. Isothermal sections of Tb-Ag-In and Dy-Ag-In phase diagrams at this temperature have been constructed. Both systems are characterized by formation of three ternary compounds: REAg{sub 3}In{sub 3} (YbAg{sub 2}In{sub 4}-type, space group Im-3), REAg{sub 2}In (MnCu{sub 2}Al-type, space group Fm-3m) and RE{sub 2}AgIn{sub 3} (CaIn{sub 2}-type, space group P6{sub 3}/mmc) RE=Tb, Dy. Homogeneity ranges of the ternary phases with CaIn{sub 2} structure type lies from 35 to 60 at% of In for Tb-containing phase and from 39 to 50 at% of In for Dy-containing phase. The existence of solid solutions based on REAg (CsCl-type, space group Pm-3m) binary compounds up to 30 at% of In and REIn{sub 3} (AuCu{sub 3}-type, space group Pm-3 m) binary compounds up to 5 at% of Ag has been found. - Graphical Abstract: Phase relations in the ternary systems Tb-Ag-In and Dy-Ag-In have been established for the isothermal section at T=870 K based on X-ray powder and single crystal diffraction analyses. The existence of three ternary compounds in each system were observed. Highlights: Black-Right-Pointing-Pointer Isothermal section of Tb-Ag-In system at T=870 K was constructed. Black-Right-Pointing-Pointer Isothermal section of Dy-Ag-In system at T=870 K was constructed. Black-Right-Pointing-Pointer Three ternary compounds and two solid solutions in each system were detected.

  18. Effect of Ag nanoparticle concentration on the electrical and ferroelectric properties of Ag/P(VDF-TrFE) composite films

    SciTech Connect (OSTI)

    Paik, Haemin; Choi, Yoon -Young; Hong, Seungbum; No, Kwangsoo

    2015-09-04

    We investigated the effect of the Ag nanoparticles on the ferroelectric and piezoelectric properties of Ag/poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) composite films. We found that the remanent polarization and direct piezoelectric coefficient increased up to 12.14 μC/cm2 and 20.23 pC/N when the Ag concentration increased up to 0.005 volume percent (v%) and decreased down to 9.38 μC/cm2 and 13.45 pC/N when it increased up to 0.01 v%. Further increase in Ag concentration resulted in precipitation of Ag phase and significant leakage current that hindered any meaningful measurement of the ferroelectric and piezoelectric properties. 46% increase of the remanent polarization value and 27% increase of the direct piezoelectric coefficient were observed in the film with the 0.005 v% of the Ag nanoparticles added without significant changes to the crystalline structure confirmed by both X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) experiments. The enhancements of both the ferroelectric and piezoelectric properties are attributed to the increase in the effective electric field induced by the reduction in the effective volume of P(VDF-TrFE) that results in more aligned dipoles.

  19. EDDY CURRENT EFFECT OF THE BNL-AGS VACUUM CHAMBER ON THE OPTICS OF THE BNL-AGS SYNCHROTRON.

    SciTech Connect (OSTI)

    TSOUPAS,N.; AHRENS,L.; BROWN,K.A.; GLENN,J.W.; GARDNER,K.

    1999-03-29

    During the acceleration cycle of the AGS synchrotron, eddy currents are generated within the walls of the vacuum chambers of the AGS main magnets. The vacuum chambers have elliptical cross section, are made of inconel material with a wall thickness of 2 mm and are placed within the gap of the combined-function main magnets of the AGS synchrotron. The generation of the eddy currents in the walls of the vacuum chambers, creates various magnetic multipoles, which affect the optics of the AGS machine. In this report these magnetic multipoles are calculated for various time interval starting at the acceleration cycle, where the magnetic field of the main magnet is {approx}0.1 T, and ending before the beam extraction process, where the magnetic field of the main magnet is almost constant at {approx}1.1 T. The calculations show that the magnetic multipoles generated by the eddy-currents affect the optics of the AGS synchrotron during the acceleration cycle and in particular at low magnetic fields of the main magnet. Their effect is too weak to affect the optics of the AGS machine during beam extraction at the nominal energies.

  20. Effect of Ag nanoparticle concentration on the electrical and ferroelectric properties of Ag/P(VDF-TrFE) composite films

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Paik, Haemin; Choi, Yoon -Young; Hong, Seungbum; No, Kwangsoo

    2015-09-04

    We investigated the effect of the Ag nanoparticles on the ferroelectric and piezoelectric properties of Ag/poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) composite films. We found that the remanent polarization and direct piezoelectric coefficient increased up to 12.14 μC/cm2 and 20.23 pC/N when the Ag concentration increased up to 0.005 volume percent (v%) and decreased down to 9.38 μC/cm2 and 13.45 pC/N when it increased up to 0.01 v%. Further increase in Ag concentration resulted in precipitation of Ag phase and significant leakage current that hindered any meaningful measurement of the ferroelectric and piezoelectric properties. 46% increase of the remanent polarization value and 27% increasemore » of the direct piezoelectric coefficient were observed in the film with the 0.005 v% of the Ag nanoparticles added without significant changes to the crystalline structure confirmed by both X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) experiments. The enhancements of both the ferroelectric and piezoelectric properties are attributed to the increase in the effective electric field induced by the reduction in the effective volume of P(VDF-TrFE) that results in more aligned dipoles.« less

  1. EA-342-A Royal Bank of Canada | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -A Royal Bank of Canada EA-342-A Royal Bank of Canada Order authorizing Royal Bank of Canada to export electric energy to Canada. PDF icon EA-342-A RBC (CN).pdf More Documents & Publications EA-328-A RBC Energy Services LP Application to Export Electric Energy OE Docket No. EA-328-A RBC Energy Services LP EA-97-D Portland General Electric Company

  2. IADG Energy Bank Revolving Loan Program | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Authority and Iowa Area Development Group Website http:www.iadg.comservicesfinancial-assistanceiadg-energy-bank.aspx Funding Source American Recovery and...

  3. World Bank Climate Innovation Centers | Open Energy Information

    Open Energy Info (EERE)

    America and the Caribbean) for this property. References Climate Innovation Center Business Plans1 InfoDev2 World Bank Climate Innovation Centers Screenshot "The CIC works...

  4. Making Development Climate Resilient: A World Bank Strategy for...

    Open Energy Info (EERE)

    Development Climate Resilient: A World Bank Strategy for Sub-Saharan Africa Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Making Development Climate Resilient: A World...

  5. Red Bank, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    (Redirected from Red Bank, NJ) Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.3470543, -74.0643065 Show Map Loading map... "minzoom":false,"mappingservice":...

  6. Ex-Im Bank Environmental Export Finance Program | Open Energy...

    Open Energy Info (EERE)

    Environmental Export Financing Webpage 1 "Ex-Im Bank's financing helps mitigate risk for U.S. environmental companies and also offers competitive financing terms to...

  7. Preparation, characterization and photocatalytic activity of visible-light-driven plasmonic Ag/AgBr/ZnFe{sub 2}O{sub 4} nanocomposites

    SciTech Connect (OSTI)

    Li, Xiaojuan Tang, Duanlian; Tang, Fan; Zhu, Yunyan; He, Changfa; Liu, Minghua Lin, Chunxiang; Liu, Yifan

    2014-08-15

    Highlights: A plasmonic Ag/AgBr/ZnFe{sub 2}O{sub 4} photocatalyst has been successfully synthesized. Ag/AgBr/ZnFe{sub 2}O{sub 4} nanocomposites exhibit high visible light photocatalytic activity. Ag/AgBr/ZnFe{sub 2}O{sub 4} photocatalyst is stable and magnetically separable. - Abstract: A visible-light-driven plasmonic Ag/AgBr/ZnFe{sub 2}O{sub 4} nanocomposite has been successfully synthesized via a depositionprecipitation and photoreduction through a novel one-pot process. X-ray diffraction spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy and UVvis diffuse reflectance spectroscopy were employed to investigate the crystal structure, chemical composition, morphology, and optical properties of the as-prepared nanocomposites. The photocatalytic activities of the nanocomposites were evaluated by photodegradation of Rhodamine B (RhB) and phenol under visible light. The results demonstrated that the obtained Ag/AgBr/ZnFe{sub 2}O{sub 4} nanocomposites exhibited higher photocatalytic activity as compared to pure ZnFe{sub 2}O{sub 4}. In addition, the sample photoreduced for 20 min and calcined at 500 C achieved the highest photocatalytic activity. Furthermore, the Ag/AgBr/ZnFe{sub 2}O{sub 4} nanocomposite has high stability under visible light irradiation and could be conveniently separated by using an external magnetic field.

  8. EA-330 The Royal Bank of Scotland plc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Royal Bank of Scotland plc EA-330 The Royal Bank of Scotland plc Order authorizing The Royal Bank of Scotland plc to export electric energy to Canada PDF icon EA-330 The Royal ...

  9. EA-330-A The Royal Bank of Scotland plc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -A The Royal Bank of Scotland plc EA-330-A The Royal Bank of Scotland plc Order authorizing The Royal Bank of Scotland plc to export electric energy to Canada PDF icon EA-330-A The ...

  10. EA-331-A The Royal Bank of Scotland plc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-331-A The Royal Bank of Scotland plc Order authorizing The Royal Bank of Scotland plc to export eelctric energy to Mexico PDF icon EA-331-A The Royal Bank of Scotland plc More ...

  11. EA-331 The Royal Bank of Scotland plc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-331 The Royal Bank of Scotland plc Order authorizing The Royal Bank of Scotland plc to export electric energy to Mexico PDF icon EA-331 The Royal Bank of Scotland plc More ...

  12. Fabrication, characterization and photocatalytic properties of Ag/AgI/BiOI heteronanostructures supported on rectorite via a cation-exchange method

    SciTech Connect (OSTI)

    Chen, Yunfang; Fang, Jianzhang; Lu, Shaoyou; Wu, Yan; Chen, Dazhi; Huang, Liyan; Xu, Weicheng; Zhu, Ximiao; Fang, Zhanqiang

    2015-04-15

    Highlights: • Ag/AgI/BiOI-rectorite was prepared by twice cation-exchange process. • Ag/AgI/BiOI-rectorite photocatalyst possessed SPR and adsorption capacity. • Ag/AgI/BiOI-rectorite exhibited highly photocatalytic activity. • Trapped holes and ·O{sub 2}{sup −} were formed active species in the photocatalytic system. - Abstract: In this work, a new plasmonic photocatalyst Ag/AgI/BiOI-rectorite was prepared via a cation exchange process. The photocatalyst had been characterized by X-ray powder diffraction (XRD), Raman spectra, nitrogen sorption (BET), field-emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS) and UV–vis diffuse reflectance spectroscopy (DRS). The photocatalytic activity, which was evaluated by degradation of rhodamine B (RhB) and bisphenol A (BPA) under visible light irradiation, was enhanced significantly by loading Ag/AgI/BiOI nanoparticles onto rectorite. The photogenerated holes and superoxide radical (·O{sub 2}{sup −}) were both formed as active species for the photocatalytic reactions under visible light irradiation. The existence of metallic Ag particles, which possess the surface plasmon resonance effect, acted as an indispensable role in the photocatalytic reaction.

  13. Oxygen Reduction at Very Low Overpotential on Nanoporous Ag Catalysts

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Yang; Lu, Qi; Zhuang, Zhongbin; Hutchings, Gregory S.; Kattel, Shyam; Yan, Yushan; Chen, Jingguang G.; Xiao, John Q.; Jiao, Feng

    2015-05-07

    Here we report a monolithic nanoporous Ag (np-Ag) material, synthesized using the dealloying method, as high-performance catalysts for ORR in alkaline media. As shown in Scheme 1, when there is insufficient potential input, the O2 molecules are more likely to rebound off from a planar electrode surface (i.e. bulk polycrystalline metal, films made from nanoparticles or nanowires) before they could be reduced. In contrast, they are more likely to be trapped inside the monolithic nanoporous structure, contacting with catalytic surface for multiple time, which greatly enhances the chance for them to be fully reduced. As a result, the np-Ag catalystmore » is able to achieve an equivalent or better ORR performance than the state-of the-art Pt/C catalyst at low overpotentials, which is most desired in electrochemical energy applications for maximizing efficiency.« less

  14. Oxygen Reduction at Very Low Overpotential on Nanoporous Ag Catalysts

    SciTech Connect (OSTI)

    Zhou, Yang; Lu, Qi; Zhuang, Zhongbin; Hutchings, Gregory S.; Kattel, Shyam; Yan, Yushan; Chen, Jingguang G.; Xiao, John Q.; Jiao, Feng

    2015-05-07

    Here we report a monolithic nanoporous Ag (np-Ag) material, synthesized using the dealloying method, as high-performance catalysts for ORR in alkaline media. As shown in Scheme 1, when there is insufficient potential input, the O2 molecules are more likely to rebound off from a planar electrode surface (i.e. bulk polycrystalline metal, films made from nanoparticles or nanowires) before they could be reduced. In contrast, they are more likely to be trapped inside the monolithic nanoporous structure, contacting with catalytic surface for multiple time, which greatly enhances the chance for them to be fully reduced. As a result, the np-Ag catalyst is able to achieve an equivalent or better ORR performance than the state-of the-art Pt/C catalyst at low overpotentials, which is most desired in electrochemical energy applications for maximizing efficiency.

  15. Evidence for hybrid surface metallic band in (4??4) silicene on Ag(111)

    SciTech Connect (OSTI)

    Tsoutsou, D. Xenogiannopoulou, E.; Golias, E.; Tsipas, P.; Dimoulas, A.

    2013-12-02

    The electronic band structure of monolayer (4??4) silicene on Ag(111) is imaged by angle resolved photoelectron spectroscopy. A dominant hybrid surface metallic band is observed to be located near the bulk Ag sp-band which is also faintly visible. The two-dimensional character of the hybrid band has been distinguished against the bulk character of the Ag(111) sp-band by means of photon energy dependence experiments. The surface band exhibits a steep linear dispersion around the K{sup }{sub Ag} point and has a saddle point near the M{sup }{sub Ag} point of Ag(111) resembling the ?-band dispersion in graphene.

  16. Pb-free Sn-Ag-Cu ternary eutectic solder

    DOE Patents [OSTI]

    Anderson, I.E.; Yost, F.G.; Smith, J.F.; Miller, C.M.; Terpstra, R.L.

    1996-06-18

    A Pb-free solder includes a ternary eutectic composition consisting essentially of about 93.6 weight % Sn-about 4.7 weight % Ag-about 1.7 weight % Cu having a eutectic melting temperature of about 217 C and variants of the ternary composition wherein the relative concentrations of Sn, Ag, and Cu deviate from the ternary eutectic composition to provide a controlled melting temperature range (liquid-solid ``mushy`` zone) relative to the eutectic melting temperature (e.g. up to 15 C above the eutectic melting temperature). 5 figs.

  17. Field-induced quantum criticality in YbAgGe

    SciTech Connect (OSTI)

    Bud'ko, S.; Canfield, P.

    2008-01-01

    YbAgGe is one of the very few stoichiometric, Yb-based, heavy fermion materials that exhibit field-induced quantum criticality. We will present an overview of thermodynamic and transport measurements in YbAgGe single crystals. Moderate magnetic field (45-90 kOe, depending on orientation) suppresses long range magnetic order, giving rise to non-Fermi-liquid behavior followed at higher field by a crossover to a heavy Fermi-liquid. Given the more accessible temperature and field scales, a non-Fermi liquid region rather than point for T {yields} 0 K may be detected.

  18. Pb-free Sn-Ag-Cu ternary eutectic solder

    DOE Patents [OSTI]

    Anderson, Iver E.; Yost, Frederick G.; Smith, John F.; Miller, Chad M.; Terpstra, Robert L.

    1996-06-18

    A Pb-free solder includes a ternary eutectic composition consisting essentially of about 93.6 weight % Sn-about 4.7 weight % Ag-about 1.7 weight % Cu having a eutectic melting temperature of about 217.degree. C. and variants of the ternary composition wherein the relative concentrations of Sn, Ag, and Cu deviate from the ternary eutectic composition to provide a controlled melting temperature range (liquid-solid "mushy" zone) relative to the eutectic melting temperature (e.g. up to 15.degree. C. above the eutectic melting temperature).

  19. Electronic inhomogeneity and Ag:Sb imbalance of Ag1-yPb18Sb1+zTe20

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-performance thermoelectrics elucidated by 125Te and 207Pb NMR | Energy Frontier Research Centers Electronic inhomogeneity and Ag:Sb imbalance of Ag1-yPb18Sb1+zTe20 high-performance thermoelectrics elucidated by 125Te and 207Pb NMR Home Author: E.M. Levin, B.A. Cook, K. Ahn, M.G. Kanatzidis, K. Schmidt-Rohr Year: 2009 Abstract: Using magic-angle spinning 125Te and 207Pb NMR, we have discovered the presence of two phases of approximately tenfold different free-electron concentration, n,

  20. Origin of Novel Diffusions of Cu and Ag in Semiconductors: The...

    Office of Scientific and Technical Information (OSTI)

    Origin of Novel Diffusions of Cu and Ag in Semiconductors: The Case of CdTe Prev Next Title: Origin of Novel Diffusions of Cu and Ag in Semiconductors: The Case of CdTe ...

  1. Wacker Chemie AG formerly Wacker GmbH | Open Energy Information

    Open Energy Info (EERE)

    Wacker Chemie AG formerly Wacker GmbH Jump to: navigation, search Name: Wacker Chemie AG (formerly Wacker GmbH) Place: Munich, Germany Zip: 81737 Sector: Solar Product: German...

  2. Solar World USA not SolarWorld AG | Open Energy Information

    Open Energy Info (EERE)

    World USA not SolarWorld AG Jump to: navigation, search Name: Solar World USA (not SolarWorld AG) Place: Colorado Springs, Colorado Zip: 80907 Sector: Solar Product: Solar World...

  3. Ag-Al2O3 Catalyst HC-SCR: Performance with Light Alcohols and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ag-Al2O3 Catalyst HC-SCR: Performance with Light Alcohols and Other Reductants Ag-Al2O3 Catalyst HC-SCR: Performance with Light Alcohols and Other Reductants 2004 Diesel Engine ...

  4. Bull Solar GmbH Bull Holding AG | Open Energy Information

    Open Energy Info (EERE)

    (Bull Holding AG) Place: North Rhine-Westphalia, Germany Sector: Solar Product: German solar installer. References: Bull Solar GmbH (Bull Holding AG)1 This article is a stub....

  5. Beam energy evolution of HBT systematics at the AGS

    SciTech Connect (OSTI)

    Best, D.; Ajitanand, N.N.; Alexander, J.M.; Anderson, M.; Brady,F.P.; Case, T.; Caskey, W.; Cebra, D.; Chance, J.L.; Chung, P.; Cole, B.; Crowe, K.; Das, A.C.; Draper, J.E.; Gilkes, M.L.; Gushue, S.; Heffner,M.; Hirsch, A.S.; Hjort, E.L.; Huo, L.; Justice, M.; Kaplan, M.; Keane,D.; Kintner, J.C.; Klay, J.; Krofcheck, D.; Lacey, R.A.; Lisa, M.A.; Liu,H.; Liu, Y.M.; McGrath, R.; Milosevich, Z.; Odyniec, G.; Olson, D.L.; Panitkin, S.Y.; Pinkenburg, C.; Porile, N.T.; Rai, G.; Ritter, H.G.; Romero, J.L.; Scharenberg, R.P.; Schroeder, L.S.; Srivastava, B.; Stone,N.T.B.; Symons, T.J.M.; Wang, S.; Wells, R.; Whitfield, J.; Wienold, T.; Witt, R.; Wood, L.; Yang, X.; Zhang, W.; Zhang, Y.; E895 Collaboration

    1999-07-31

    We present preliminary results of the first pi interferometry (HBT) excitation function at intermediate AGS energies. The beam energy evolution of the correlations' dependence on mr:centrality, and emission angle with respect to the reaction I,lane are discussed. Comparisons with predictions of the RQMD cascade model are made.

  6. Forensic DNA data banking by state crime labortaories

    SciTech Connect (OSTI)

    McEwen, J.E.

    1995-06-01

    This article reports the results of a survey of the responsible crime laboratories in the first 19 states with legislation establishing forensic DNA data banks. The survey inquired into the labs` policies and procedures regarding the collection, storage, and analysis of samples; the retention of samples and data; search protocols; access to samples and data by third parties; and related matters. The research suggests that (1) the number of samples collected from convicted offenders for DNA data banking has far surpassed the number that have been analyzed; (2) data banks have already been used in a small but growing number of cases, to locate suspects and to identify associations between unresolved cases; (3) crime labs currently plan to retain indefinitely the samples collected for their data banks; and (4) the nature and extent of security safeguards that crime labs have implemented for their data banks vary among states. The recently enacted DNA Identification Act (1994) will provide $40 million in federal matching grants to states for DNA analysis activities, so long as states comply with specified quality-assurance standards, submit to external proficiency testing, and limit access to DNA information. Although these additional funds should help to ease some sample backlogs, it remains unclear how labs will allocate the funds, as between analyzing samples for their data banks and testing evidence samples in cases without suspects. The DNA Identification Act provides penalties for the disclosure or obtaining of DNA data held by data banks that participate in CODIS, the FBI`s evolving national network of DNA data banks, but individual crime labs must also develop stringent internal safeguards to prevent breaches of data-bank security. 9 refs., 3 tabs.

  7. Microsoft Word - AG Chapter 6 1 Nov 2010 | Department of Energy

    Energy Savers [EERE]

    AG Chapter 6 1 Nov 2010 Microsoft Word - AG Chapter 6 1 Nov 2010 PDF icon Microsoft Word - AG Chapter 6 1 Nov 2010 More Documents & Publications Competition Requirements AcqGuide 5.2-OPAM Chapter 6 - Competition Requirements

  8. Data banks for risk assessment at the Savannah River Site

    SciTech Connect (OSTI)

    Durant, W.S.; Lux, C.R.; Baughman, D.F.

    1990-01-01

    The Savannah River Site maintains a compilation of operating problems and equipment failures that have occurred in the fuel reprocessing and other areas in the form of computerized data banks. 14 refs., 25 figs.

  9. Energy Secretary Moniz and Export-Import Bank Chairman Hochberg...

    Energy Savers [EERE]

    (Ex-Im Bank) for a tour of the First Solar manufacturing plant in Perrysburg, ... these investments are making to the nation's goal of a low-carbon energy future. ...

  10. DOE's Disposition of Excess Real Property Status of Banked Square...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This report details the Department's excess area elimination efforts through FY 2014. ... FY 2014 Net Banked Area (square feet) 24,035,398 1,212,147 25,247,545 8,583,326 422,521 ...

  11. BankInvest Technology AS | Open Energy Information

    Open Energy Info (EERE)

    that manages the BankInvest New Energy Solutions fund as well as funds in IT and biotechnology. Coordinates: 55.67631, 12.569355 Show Map Loading map......

  12. Red Bank, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Bank is a borough in Monmouth County, New Jersey. It falls under New Jersey's 6th...

  13. Red Bank, Tennessee: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Red Bank is a city in Hamilton County, Tennessee. It falls under Tennessee's 3rd...

  14. Building America Expert Meeting: Energy Savings You Can Bank On |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Energy Savings You Can Bank On Building America Expert Meeting: Energy Savings You Can Bank On On October 12, 2011, Building America team Alliance for Residential Building Innovation conducted an Expert Meeting on the topic of performance guarantees and financing vehicles for Energy Efficiency Upgrades. The meeting brought together technical, policy, and financial experts, including researchers, experienced installation contractors, and innovative energy business

  15. Disproportionation of Ag+ by pressure-and heat-induced Xe insertion into

    Office of Scientific and Technical Information (OSTI)

    Ag-natrolite (Journal Article) | SciTech Connect Disproportionation of Ag+ by pressure-and heat-induced Xe insertion into Ag-natrolite Citation Details In-Document Search Title: Disproportionation of Ag+ by pressure-and heat-induced Xe insertion into Ag-natrolite Authors: Seoung, D ; Cynn, H ; Park, C ; Choi, K Y ; Blom, D A ; Evans, W J ; Kao, C C ; Vogt, T ; Lee, Y Publication Date: 2014-01-13 OSTI Identifier: 1158896 Report Number(s): LLNL-JRNL-648696 DOE Contract Number:

  16. Tube Bank C - metal wastage: status report, August 1983

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    The Experimental Pressurised Fluidized Bed Combustion Facility at Grimethorpe, South Yorkshire, UK incorporates an in-bed tube bank. During the operation of the facility between June and September 1982, an unexpectedly high degree of metal wastage occurred from the external surfaces of this tube bank. Measures were taken to reduce the rate of metal wastage and extend the life of the tube bank, which was subsequently replaced in July 1983 after a total operating period of 1222 hours of coal burning. Using small-scale fluidized bed cold models, experimental investigations were carried out to determine measures to reduce the metal wastage. The results indicated that metal wastage would be reduced by the following changes: a reduction in the fluidizing velocity; the attachment of studs or axial fins to the tubes; a reduction in the height of the space between the distributor plate and the bottom of the tube bank; and the elimination, where possible of any large gaps within the tube bank. Such changes have been incorporated into the design of the replacement tube bank. This has now been installed and has experienced significantly less metal wastage. 9 references, 6 tables, 34 figures.

  17. Characterization and device performance of (AgCu)(InGa)Se2 absorber layers

    SciTech Connect (OSTI)

    Hanket, Gregory; Boyle, Jonathan H.; Shafarman, William N.

    2009-06-08

    The study of (AgCu)(InGa)Se2 absorber layers is of interest in that Ag-chalcopyrites exhibit both wider bandgaps and lower melting points than their Cu counterparts. (AgCu)(InGa)Se2 absorber layers were deposited over the composition range 0 < Ag/(Ag+Cu) < 1 and 0.3 < Ga/(In+Ga) < 1.0 using a variety of elemental co-evaporation processes. Films were found to be singlephase over the entire composition range, in contrast to prior studies. Devices with Ga content 0.3 < Ga/(In+Ga) <0.5 tolerated Ag incorporation up to Ag/(Ag+Cu) = 0.5 without appreciable performance loss. Ag-containing films with Ga/(In+Ga) = 0.8 showed improved device characteristics over Cu-only control samples, in particular a 30-40% increase in short-circuit current. An absorber layer with composition Ag/(Ag+Cu) = 0.75 and Ga/(In+Ga) = 0.8 yielded a device with VOC = 890 mV, JSC = 20.5mA/cm2, fill factor = 71.3%, and ? = 13.0%.

  18. CONTINUOUS EXTRACTED BEAM IN THE AGS FAST EXTERNAL BEAM LINE.

    SciTech Connect (OSTI)

    GLENN,J.W.; TSOUPAS,N.; BROWN,K.A.; BIRYUKOV,V.M.

    2001-06-18

    A method to split off a few percent of the 6 x 10{sup 13} AGS beam delivered to the Slow External Beam (SEB) lines and send it down the Fast External Beam line (FEB) has been developed. The mission is to feed a counter experiment off the FEB that directly measures the neutrino mass using the muon storage ring. The use of normal thin septum splitters would have an excessive loss overhead and been optically difficult. The AGS Slow Extraction uses a third integer resonance with sextuple strength so the resonance width is a few percent of the beam width. This results in a low density tail which will be clipped by a bent crystal and deflected into the FEB channel. This clipping off of the tail should reduce losses in the SEB transport line. Details of modeled orbits, particle distribution and extraction trajectories into and out off the crystal will be given.

  19. Application of a new coordination compound for the preparation of AgI nanoparticles

    SciTech Connect (OSTI)

    Mohandes, Fatemeh; Salavati-Niasari, Masoud

    2013-10-15

    Graphical abstract: Silver iodide nanoparticles have been sonochemically synthesized by using silver salicylate complex, [Ag(HSal)], as silver precursor. A series of control experiments were carried out to investigate the effects of solvent, surfactant concentration, sonication time and temperature on the morphology of AgI nanostructures. - Highlights: Silver salicylate as a new precursor was applied to fabricate ?-AgI nanoparticles. To further decrease the particle size of AgI, SDS was used as surfactant. The effect of preparation parameters on the particle size of AgI was investigated. - Abstract: AgI nanoparticles have been sonochemically synthesized by using silver salicylate, [Ag(HSal)], as silver precursor. To investigate the effects of solvent, surfactant concentration, sonication time and temperature on the morphology of AgI nanostructures, several experiments were carried out. The products were characterized by SEM, TEM, XRD, TGA/DTA, UVvis, and FT-IR. Based on the experimental findings in this research, it was found that the size of AgI nanoparticles was dramatically dependent on the silver precursor, sonochemical irradiation, and surfactant concentration. Sodium dodecyl sulfate (SDS) was applied as surfactant. When the concentration of SDS was 0.055 mM, very uniform sphere-like AgI nanoparticles with grain size of about 2530 nm were obtained. These results indicated that the high concentration of SDS could prevent the aggregation between colloidal nanoparticles due to its steric hindrance effect.

  20. Synthesis of Ag{sub 2}S nanorods by biomimetic method in the lysozyme matrix

    SciTech Connect (OSTI)

    Qin, Dezhi Zhang, Li; He, Guoxu; Zhang, Qiuxia

    2013-09-01

    Graphical abstract: - Highlights: • Firstly, Ag{sub 2}S nanorods were synthesized by biomimetic method in the lysozyme solutions. • The study of the interaction between Ag{sup +} and the lysozyme. • Discussion of possible formation mechanism of Ag{sub 2}S nanorods. • The synthesis process of lyso-conjugated Ag{sub 2}S nanocrystals is facile, effective and environment friendly. - Abstract: Ag{sub 2}S nanorods were successfully synthesized by biomimetic route in the lysozyme solution at physiological temperature and atmospheric pressure. The transmission electron microscopy (TEM) images revealed that the prepared nanorods are uniform and monodisperse with homogeneous size about 50 nm in diameter and 150 nm in length. The optical property of Ag{sub 2}S nanocrystals was studied by the ultraviolet–visible (UV–vis) and photoluminescence (PL) spectroscopy, the results show that the products exhibit well-defined emission at 471 nm and 496 nm excited by 292 nm. The interaction of Ag{sup +}/Ag{sub 2}S with the lysozyme was investigated through Fourier transform infrared (FT-IR) spectroscopy, which shows that the cooperation effect of the lysozyme and Ag{sup +} could be responsible for the formation of as obtained Ag{sub 2}S nanorods.

  1. Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ...

    Open Energy Info (EERE)

    National Inventory Systems Caribbean-GTZ Renewable Energy Program Chile-GTZ Renewable Energy Project China-Enhancing Low-carbon Development by Greening the Economy: Policy...

  2. Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ...

    Open Energy Info (EERE)

    14,700 staff, about 11,200 of whom are national personnel. 1,800 people are employed at Head Office in Eschborn near Frankfurt am Main and at various locations within Germany....

  3. Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ...

    Open Energy Info (EERE)

    Demand Management in Beijing: Mitigation of Emissions in Urban Transport Ci:grasp Colombia-Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer)...

  4. Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ...

    Open Energy Info (EERE)

    Tool: Steps for Moving a NAMA from Idea Towards Implementation Add Tool GIZ Programs Bangladesh-GTZ Renewable Energy and Energy Efficiency Programme Brazil-GTZ Renewable Energy and...

  5. Deutsche Gesellschaft fr Internationale Zusammenarbeit (GIZ...

    Open Energy Info (EERE)

    for GHG inventories and MRV Tunisia-GTZ Promotion of EERE Uganda-GTZ Promotion of EERE Ukraine-GTZ Climate Oriented Mobility Uruguay-Enhancing Low-carbon Development by Greening...

  6. Spin glass in semiconducting KFe1.05Ag0.88Te2 single crystals

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ryu, H.; Lei, H.; Klobes, B.; Warren, J. B.; Hermann, R. P.; Petrovic, C.

    2015-05-26

    We report discovery of KFe1.05Ag0.88Te2 single crystals with semiconducting spin glass ground state. Composition and structure analysis suggest nearly stoichiometric I4/mmm space group but allow for the existence of vacancies, absent in long range semiconducting antiferromagnet KFe1.05Ag0.88Te2. The subtle change in stoichometry in Fe/Ag sublattice changes magnetic ground state but not conductivity, giving further insight into the semiconducting gap mechanism.

  7. AG490 inhibits NFATc1 expression and STAT3 activation during RANKL induced osteoclastogenesis

    SciTech Connect (OSTI)

    Li, Chang-hong; Zhao, Jin-xia; Sun, Lin; Yao, Zhong-qiang; Deng, Xiao-li; Liu, Rui; Liu, Xiang-yuan

    2013-06-14

    Highlights: AG490 inhibits RANKL-induced osteoclastogenesis in RAW264.7 cells. AG490 affects cell proliferation and cell cycle distribution. AG490 reduces NFATc1 expression during RANKL-induced osteoclastogenesis. AG490 disrupts the activation of RANKL-mediated JAK2/STAT3 signaling pathway. STAT3 depletion partly mimics the effect of AG490 on RANKL-induced osteoclastogenesis. -- Abstract: Commonly, JAK/STAT relays cytokine signals for cell activation and proliferation, and recent studies have shown that the elevated expression of JAK/STAT is associated with the immune rejection of allografts and the inflammatory processes of autoimmune disease. However, the role which JAK2/STAT3 signaling plays in the receptor activator of nuclear factor-?B ligand (RANKL)-mediated osteoclastogenesis is unknown. In this study, we investigated the effects of AG490, specific JAK2 inhibitor, on osteoclast differentiation in vitro. AG490 significantly inhibited osteoclastogenesis in murine osteoclast precursor cell line RAW264.7 induced by RANKL. AG490 suppressed cell proliferation and delayed the G1 to S cell cycle transition. Furthermore, AG490 also suppressed the expression of nuclear factor of activated T cells (NFAT) c1 but not c-Fos in RAW264.7. Subsequently, we investigated various intracellular signaling components associated with osteoclastogenesis. AG490 had no effects on RANKL-induced activation of Akt, ERK1/2. Interestingly, AG490 partly inhibited RANKL-induced phosphorylation of Ser{sup 727} in STAT3. Additionally, down-regulation of STAT3 using siRNA resulted in suppression of TRAP, RANK and NFATc1 expression. In conclusion, we demonstrated that AG490 inhibited RANKL-induced osteoclastogenesis by suppressing NFATc1 production and cell proliferation via the STAT3 pathway. These results suggest that inhibition of JAK2 may be useful for the treatment of bone diseases characterized by excessive osteoclastogenesis.

  8. Spectral investigation of nonlinear local field effects in Ag nanoparticles

    SciTech Connect (OSTI)

    Sato, Rodrigo Takeda, Yoshihiko; Ohnuma, Masato; Oyoshi, Keiji

    2015-03-21

    The capability of Ag nanoparticles to modulate their optical resonance condition, by optical nonlinearity, without an external feedback system was experimentally demonstrated. These optical nonlinearities were studied in the vicinity of the localized surface plasmon resonance (LSPR), using femtosecond pump-and-probe spectroscopy with a white-light continuum probe. Transient transmission changes ΔT/T exhibited strong photon energy and particle size dependence and showed a complex and non-monotonic change with increasing pump light intensity. Peak position and change of sign redshift with increasing pump light intensity demonstrate the modulation of the LSPR. These features are discussed in terms of the intrinsic feedback via local field enhancement.

  9. W{sub 18}O{sub 49} nanorods decorated with Ag/AgCl nanoparticles as highly-sensitive gas-sensing material and visible-light-driven photocatalyst

    SciTech Connect (OSTI)

    Sun Shibin; Chang Xueting; Dong Lihua; Zhang Yidong; Li Zhenjiang; Qiu Yanyan

    2011-08-15

    A novel gas-sensing material and photocatalyst was successfully obtained by decorating Ag/AgCl nanoparticles on the W{sub 18}O{sub 49} nanorods through a clean photochemical route. The as-prepared samples were characterized using combined techniques of X-ray diffractometry, electron microscopy, energy dispersive X-ray spectrometry, and X-ray photoelectron spectroscopy. Gas-sensing measurements indicate that the Ag/AgCl/W{sub 18}O{sub 49} NRs sensors exhibit superior reducing gas-sensing properties to those of bare W{sub 18}O{sub 49} NRs, and they are highly selective and sensitive to NH{sub 3}, acetone, and H{sub 2}S with short response and recovery times. The Ag/AgCl/W{sub 18}O{sub 49} NRs photocatlysts also possess higher photocatalytic performance than bare W{sub 18}O{sub 49} NRs for degradation of methyl orange under simulated sunlight irradiation. Possible mechanisms concerning the enhancement of gas-sensing and photocatalytic activities of the Ag/AgCl/W{sub 18}O{sub 49} NRs composite were proposed. - Graphical Abstract: The Ag/AgCl nanoparticles adhered well to the W{sub 18}O{sub 49} nanorod. The Ag could act as transfer center of the photoexcited carriers, prohibiting their recombinations in both W{sub 18}O{sub 49} and AgCl. Highlights: > Ag/AgCl/W{sub 18}O{sub 49} NRs were successfully obtained via a clean photochemical route. > The Ag/AgCl nanoparticles decorated on the W{sub 18}O{sub 49} NRs possessed cladding structure. > The Ag/AgCl/W{sub 18}O{sub 49} NRs exhibited excellent gas-sensing and photocatalytic properties.

  10. Expanding the Repertoire of Chalcogenide Nanocrystal Networks: Ag2Se Gels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Aerogels by Cation Exchange Reactions | Energy Frontier Research Centers Expanding the Repertoire of Chalcogenide Nanocrystal Networks: Ag2Se Gels and Aerogels by Cation Exchange Reactions Home Author: Q. Yao, I. U. Arachchige, S. L. Brock Year: 2009 Abstract: Cation exchange is shown to be a simple and efficient method to prepare nanostructured Ag2Se gels and aerogels from CdSe gel precursors. Treatment of CdSe wet gels with AgNO3yields, for the first time, Ag2Se gels, and these are

  11. NuCellSys GmbH formerly Ballard AG formerly XCellsis | Open Energy...

    Open Energy Info (EERE)

    Germany Product: Focused on developing and manufacturing fuel cell systems for automotive applications. References: NuCellSys GmbH (formerly Ballard AG, formerly XCellsis)1...

  12. Organic pollutant photodecomposition by Ag/KNbO3 nanocomposites: A combined experimental and theoretical study

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Tingting; Liu, Ping; Lei, Wanying; Rodriguez, J. A.; Yu, Jiaguo; Qi, Yang; Liu, Gang; Liu, Minghua

    2016-01-12

    In this study, Ag nanoparticles supported on well-defined perovskite orthorhombic KNbO3 nanowires are synthesized via facile photoreduction and systematically characterized by XRD, Raman, DRUV–vis, XPS, PL, TEM, HRTEM, and HAADF-STEM. The photoreactivity of Ag/KNbO3 nanocomposites as a function of Ag contents (0.4–2.8 wt %) is assessed toward aqueous rhodamine B degradation under UV- and visible-light, respectively. It is found that the UV-induced photoreactivity initially increases and then decreases with increasing Ag contents. At an optimal Ag content (ca. 1.7 wt %), the greatest photoreactivity is achieved under UV light, with the photocatalytic reaction rate of 1.7 wt % Ag/KNbO3 exceedingmore » that of pristine KNbO3 by a factor of ca. 13. In contrast, visible light-induced photoreactivity monotonically increases with increasing Ag contents in the range of 0.4–2.8 wt %. On the basis of the detected active species and intermediate products in the photocatalytic processes, conjugated structure cleavage and N-deethylation are revealed to be the respective predominant pathway under UV and visible-light illumination. To gain an insight into the observed photoreactivity, the electronic properties of Ag/KNbO3 have been investigated using spin-polarized DFT calculations. Herein, Ag extended adlayers (1–4 ML) on the slab models of KNbO3 (101) are employed to mimic large supported Ag nanoparticles. A Bader analysis of the electron density shows a small net charge transfer (ca. 0.1 e) from KNbO3 to Ag. The electron localization function of Ag/KNbO3 (101) illustrates that Ag adlayers with thickness larger than 2 ML are essentially metallic, and weak polarization occurs at the interface. In addition, the metallic Ag adlayers generate a continuum of Ag bandgap states, which play a key role in determining different Ag content-dependent behavior between UV and visible-light illumination.« less

  13. NH3-Selective Catalytic Reduction over Ag/Al2O3 Catalysts

    Broader source: Energy.gov [DOE]

    DRIFT spectroscopy used together with flow reactor experiments to investigate the role of H2 for SCR over Ag/Al2O3

  14. Surface-supported Ag islands stabilized by a quantum size effect: Their interaction with small molecules relevant to ethylene epoxidation

    SciTech Connect (OSTI)

    Shao, Dahai

    2013-05-15

    This dissertation focuses on how QSE-stabilized, surface-supported Ag nanoclusters will interact with ethylene or oxygen. Experiments are performed to determine whether the QSE-mediated Ag islands react differently toward adsorption of ethylene or oxygen, or whether the adsorption of these small molecules will affect the QSE-mediated stability of Ag islands. Studies of the interaction of oxygen with Ag/Si(111)-77 were previously reported, but these studies were performed at a low Ag coverage where 3D Ag islands were not formed. So the study of such a system at a higher Ag coverage will be a subject of this work. The interaction of ethylene with Ag/Si(111)-77, as well as the interaction of oxygen with Ag/NiAl(110) are also important parts of this study.

  15. Development of the Cummins 5.9 L for the Gale Banks Engineering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Cummins 5.9 L for the Gale Banks Engineering Dodge Dakota Sidewinder Development of the Cummins 5.9 L for the Gale Banks Engineering Dodge Dakota Sidewinder 2003 DEER ...

  16. Environmental effects of SO{sub 2} trading and banking

    SciTech Connect (OSTI)

    Burtraw, D.; Mansur, E.

    1999-10-15

    The widely acknowledged innovation of Title IV of the 1990 Clean Air Act Amendments is sulfur dioxide allowance trading, which is designed to encourage the electricity industry to minimize the cost of reducing emissions. Few studies have examined the environmental effects of trading, and none have explored the effects of banking. The authors used an integrated assessment computer model, the Tracking and Analysis Framework, to evaluate changes in emissions of SO{sub 2}, atmospheric concentrations of sulfates and deposition of sulfur, and public health benefits from reduced exposure to SO{sub 2} and particulate matter. They assessed geographic and temporal changes at the state level that result from trading and banking and compared them with estimated cost savings. The findings are not consistent with the feats of the program's critics. In the East and Northeast including New York State, an area of particular concern, the authors found that health benefits increase and sulfur deposition decrease slightly as a result of trading. Nationally, trading results in health-related benefits in addition to significant cost savings. Banking changes the timing of emissions, but the geographic consequence of banking is varied.

  17. Banking on Solar: New Opportunities for Lending (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-08-01

    The U.S. solar industry is a $13.7 billion market with roughly 450,000 systems in place. Bank and credit union lending for solar system deployment represents a valuable new opportunity for lenders to expand their consumer and commercial customer relationships, bring on new relationships and open a new asset class category.

  18. DOE Hosts Festival to Collect Items for Area Food Banks

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – Deputy Secretary of Energy Daniel Poneman and a representative of the Capital Area Food Bank are among the guest speakers at an event this Tuesday, July 31, to collect food items for the DOE Feeds Families drive.

  19. EM Rockets Past Target for Donations to Stock Food Banks

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – EM donated close to 50,000 pounds of non-perishable items to the Fourth Annual Feds Feed Families Campaign, easily surpassing its target of 19,120 pounds. All donations were delivered directly to food banks to provide goods to the needy.

  20. The Synthesis of Ag-Doped Mesoporous TiO2

    SciTech Connect (OSTI)

    Li, Xiaohong S.; Fryxell, Glen E.; Wang, Chong M.; Engelhard, Mark H.

    2008-04-15

    Ag-doped mesoporous titanium oxide was prepared using non-ionic surfactants and easily handled titanium precursors, under mild reaction conditions. In contrast to the stabilizing effect of Cd-doping on mesoporous TiO2, Ag-doping was found to significantly destabilize the mesoporous structure.

  1. Preparation and photocatalytic properties of AgISnO{sub 2} nano-composites

    SciTech Connect (OSTI)

    Wen, Biao; Wang, Xiao-Hui; Lu, Juan; Cao, Jia-Lei; Wang, Zuo-Shan

    2013-05-15

    Highlights: ? AgISnO{sub 2} nano-composites have been successfully synthesized. ? As-prepared AgISnO{sub 2} nano-composites own the excellent visible light photocatalytic activity. ? As-prepared AgISnO{sub 2} nano-composites own the excellent stability. - Abstract: AgI doped SnO{sub 2} nano-composites were prepared by the chemical coprecipitation method and were characterized by the X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. Results showed that main of the I{sup ?} ions remained in the AgI lattice which is highly dispersed in the system. The photo-catalytic experiments performed under visible light irradiation using methylene blue as the pollutant revealed that not only the photo-catalytic activity but also the stability of SnO{sub 2} based photocatalyst could be improved by introduction of an appropriate amount of AgI, and the result was further supported by the UVVis diffuse reflection spectra and the electron spin-resonance spectra. Among all of the samples, AgISnO{sub 2} nano-composite with 2At% AgI exhibited the best catalytic efficiency and stability.

  2. Facile synthesis of pompon-like ZnO-Ag nanocomposites and their enhanced photocatalytic performance

    SciTech Connect (OSTI)

    Cheng, Yang; An, Liang; Lan, Jing; Gao, Fang; Tan, Ruiqin; Li, Xiao-min; Wang, Guang-hui

    2013-10-15

    Graphical abstract: - Highlights: Pompon-like ZnO-Ag was prepared via heterothermal and photodeposition method. Pompon-like ZnO-Ag is a excellent photocatalyst for degradation of azo dyes. The photocatalytic and wetting properties were studied upon UV irradiation. The discoloring efficiency of ZnO-Ag heterostructure toward to azo dyes is 99.1%. - Abstract: A series of pompon-like ZnO-Ag nanocomposites were prepared by hydrothermal method and photochemical deposition technique. Several characterizations indicated the successful deposition of Ag nanoparticles on ZnO. As a whole, the as-prepared composites present pompon-like nanostructures with a diameter of ?10 ?m. In detail, the nanostructural, chemical and optical properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR), ultra-visible spectra (UV). The photocatalytic degradation experiments under UV irradiation using Methyl Orange (MO) as a model dye were executed here. The relative results demonstrated that the pompon-like ZnO-Ag nanocomposite with a suitable content of Ag nanoparticles (about 4.82 wt%) has the highest photochemical activity, and the removal ratio of MO was 99.1% after 0.5 h adsorption and subsequent 2 h photodegradation processes. The excellent photocatalytic performance was attributed to the high surface areas of ZnO nanostructure and effectively separation of photo-generated charge on flower-like ZnO by employing Ag nanoparticles as a conductor.

  3. Preparation of Ag/AgCl/BiMg{sub 2}VO{sub 6} composite and its visible-light photocatalytic activity

    SciTech Connect (OSTI)

    Guo, Rui; Zhang, Gaoke; Liu, Jiu

    2013-05-15

    Graphical abstract: - Abstract: A novel composite photocatalyst Ag/AgCl/BiMg{sub 2}VO{sub 6} was synthesized by depositing Ag/AgCl nanoparticles on BiMg{sub 2}VO{sub 6} substrate via a precipitationphotoreduction method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDXA), X-ray photoelectron spectroscopy (XPS) and UVvis diffuse reflectance spectrophotometer (UVvis DRS). The photocatalyst showed high and stable photocatalytic activity for photocatalytic degradation of acid red G under visible-light irradiation (? > 420 nm). In addition, the active O{sub 2}{sup ?} and h{sup +}, as main reactive species, played the major roles during the reaction process. The high photocatalytic activity of the composite may be related to the efficient electronhole pairs separation at the photocatalyst interfaces, as well as the surface plasmon resonance of Ag nanoparticles formed on AgCl particles in the degradation reaction.

  4. Joint contributions of Ag ions and oxygen vacancies to conducting filament evolution of Ag/TaO{sub x}/Pt memory device

    SciTech Connect (OSTI)

    Chung, Yu-Lung; Cheng, Wen-Hui; Chen, Wei-Chih; Jhan, Sheng-An; Chen, Jen-Sue; Jeng, Jiann-Shing

    2014-10-28

    The electroforming and resistive switching behaviors in the Ag/TaO{sub x}/Pt trilayer structure are investigated under a continual change of temperatures between 300?K and 100?K to distinguish the contributions of Ag ions and oxygen vacancies in developing of conducting filaments. For either electroforming or resistive switching, a significantly higher forming/set voltages is needed as the device is operated at 100?K, as compared to that observed when operating at 300?K. The disparity in forming/set voltages of Ag/TaO{sub x}/Pt operating at 300?K and 100?K is attributed to the contribution of oxygen vacancies, in addition to Ag atoms, in formation of conducting filament at 100?K since the mobilities of oxygen vacancies and Ag ions become comparable at low temperature. The presence of oxygen vacancy segment in the conducting filament also modifies the reset current from a gradually descending behavior (at 300?K) to a sharp drop (at 100?K). Furthermore, the characteristic set voltage and reset current are irreversible as the operation temperature is brought from 100?K back to 300?K, indicating the critical role of filament constituents on the switching behaviors of Ag/oxide/Pt system.

  5. Low-temperature ferromagnetic properties in Co-doped Ag{sub 2}Se nanoparticles

    SciTech Connect (OSTI)

    Yang, Fengxia E-mail: xia9020@hust.edu.cn; Yu, Gen; Han, Chong; Liu, Tingting; Zhang, Duanming; Xia, Zhengcai E-mail: xia9020@hust.edu.cn

    2014-01-06

    β-Ag{sub 2}Se is a topologically nontrivial insulator. The magnetic properties of Co-doped Ag{sub 2}Se nanoparticles with Co concentrations up to 40% were investigated. The cusp of zero-field-cooling magnetization curves and the low-temperature hysteresis loops were observed. With increasing concentration of Co{sup 2+} ions mainly substituting Ag{sub I} sites in the Ag{sub 2}Se structure, the resistivity, Curie temperature T{sub c}, and magnetization increased. At 10 T, a sharp drop of resistance near T{sub c} was detected due to Co dopants. The ferromagnetic behavior in Co-doped Ag{sub 2}Se might result from the intra-layer ferromagnetic coupling and surface spin. This magnetic semiconductor is a promising candidate in electronics and spintronics.

  6. Optical and quantum efficiency analysis of (Ag,Cu)(In,Ga)Se2 absorber layers

    SciTech Connect (OSTI)

    Boyle, Jonathan; Hanket, Gregory; Shafarman, William

    2009-06-09

    (Ag,Cu)(In,Ga)Se2 thin films have been deposited by elemental co-evaporation over a wide range of compositions and their optical properties characterized by transmission and reflection measurements and by relative shift analysis of quantum efficiency device measurements. The optical bandgaps were determined by performing linear fits of (?h?)2 vs. h?, and the quantum efficiency bandgaps were determined by relative shift analysis of device curves with fixed Ga/(In+Ga) composition, but varying Ag/(Cu+Ag) composition. The determined experimental optical bandgap ranges of the Ga/(In+Ga) = 0.31, 0.52, and 0.82 groups, with Ag/(Cu+Ag) ranging from 0 to 1, were 1.19-1.45 eV, 1.32-1.56 eV, and 1.52-1.76 eV, respectively. The optical bowing parameter of the different Ga/(In+Ga) groups was also determined.

  7. Intermediate hearth repair technique at Thyssen Stahl AG

    SciTech Connect (OSTI)

    Kowalski, W.; Bachhofen, H.J.; Ruether, P.; Ballewski, T.

    1996-12-31

    Nowadays various techniques for the fastest possible intermediate repair and/or emplacement of refractory materials above the tuyere level allow a significant extension of furnace campaign life. The latter are hence now exclusively determined by the service life of the hearth. The improvement of hearth monitoring and the estimation of residual brick strength of the refractory lining on the basis of temperature measurements in the hearth enable the location of individual zones of premature wear. These measurement methods, which were developed by Thyssen Stahl AG, aid the decision to undertake selective repair of the hearth. Three areas of repair are differentiated: taphole zone; hearth wall, localized; and hearth wall, extensive. This hearth repair method is described in this report using the example of hearth refurbishing blast furnace 8, Hamborn.

  8. Optimization of the AGS superconducting helical partial snake strength.

    SciTech Connect (OSTI)

    Lin,F.; Huang, H.; Luccio, A.U.; Roser, T.

    2008-06-23

    Two helical partial snakes, one super-conducting (a.k.a cold snake) and one normal conducting (a.k.a warm snake), have preserved the polarization of proton beam up to 65% in the Brookhaven Alternating Gradient Synchrotron (AGS) at the extraction energy from 85% at injection. In order to overcome spin resonances, stronger partial snakes would be required. However, the stronger the partial snake, the more the stable spin direction tilted producing a stronger horizontal intrinsic resonance. The balance between increasing the spin tune gap generated by the snakes and reducing the tilted stable spin direction has to be considered to maintain the polarization. Because the magnetic field of the warm snake has to be a constant, only the cold snake with a maximum 3T magnetic field can be varied to find out the optimum snake strength. This paper presents simulation results by spin tracking with different cold snake magnetic fields. Some experimental data are also analyzed.

  9. Transverse impedance measurement in RHIC and the AGS

    SciTech Connect (OSTI)

    Biancacci, Nicolo; Blaskiewicz, M.; Dutheil, Y.; Liu, C.; Mernick, M.; Minty, M.; White, S. M.

    2014-05-12

    The RHIC luminosity upgrade program aims for an increase of the polarized proton luminosity by a factor 2. To achieve this goal a significant increase in the beam intensity is foreseen. The beam coupling impedance could therefore represent a source of detrimental effects for beam quality and stability at high bunch intensities. For this reason it is essential to quantify the accelerator impedance budget and the major impedance sources, and possibly cure them. In this MD note we summarize the results of the 2013 transverse impedance measurements in the AGS and RHIC. The studies have been performed measuring the tune shift as a function of bunch intensity and deriving the total accelerator machine transverse impedance. For RHIC, we could obtain first promising results of impedance localization measurements as well.

  10. AGS tune jump power supply design and test

    SciTech Connect (OSTI)

    Mi, J.; Glenn, J.W.; Huang, H.; Marneris, I.; Rosas, P.; Sandberg, J.; Tan, Y.; Zhang, W.

    2011-03-28

    A horizontal tune jump system has been installed to overcome the horizontal intrinsic spin resonances, which requires jumping the horizontal tune 0.04 units 82 times, 41 up and 41 down. Two quadruple magnets have been installed in AGS ring to perform this. The pulsed magnet current ranges from about 140A near injection to about 1400A later. The current pulse rise and fall time are around 100uS and flat tops time is around 4mS. These quadruples have separated supplies. This tune jump pulse power supply employees all semiconductor parts as well as the main switches. During dummy load and magnet testing, the test results showed that the power supply could meet the specification. This article will describe some details of power supply simulation, design and testing. Some test waveforms and pictures are presented in this paper.

  11. SrAgZn and EuAgZn with KHg{sub 2}-type structure—Structure, magnetic properties, and {sup 151}Eu Mössbauer spectroscopy

    SciTech Connect (OSTI)

    Gerke, Birgit; Rodewald, Ute Ch.; Niehaus, Oliver; Pöttgen, Rainer

    2013-07-15

    Samples of SrAgZn and EuAgZn were synthesized by reaction of the elements in sealed tantalum crucibles. Both structures were refined on the basis of single crystal X-ray diffractometer data: KHg{sub 2}-type, Imma, a=476.7(1), b=780.9(2), c=810.1(2) pm, R{sub 1}/wR{sub 2}=0.0189/0.0119, 381 F² values for SrAg{sub 1.12}Zn{sub 0.88} and a=474.43(9), b=760.8(2), c=799.0(2) pm, R{sub 1}/wR{sub 2}=0.0226/0.0483, 370 F² values for EuAg{sub 1.17}Zn{sub 0.83} with 13 variables per refinement. Silver and zinc are randomly distributed on the Hg position and build up three-dimensional networks. EuAgZn shows ferromagnetic ordering at 29(1) K. In the temperature range from 75 to 300 K the sample shows Curie–Weiss behaviour with μ{sub eff}=7.87(1) μ{sub B}/Eu atom and θ{sub P}=37.1(1) K, indicating divalent europium. {sup 151}Eu Mössbauer spectroscopic measurements confirmed the divalent state with an isomer shift of −9.31 mm/s at 78 K. Temperature dependent {sup 151}Eu data show first magnetic hyperfine field splitting at 25 K and a saturated magnetization of 17 T at 5.2 K. The temperature dependence can be described by an S=7/2 Brillouin function. - Graphical abstract: The near neighbor coordination of the strontium and europium atoms in SrAg{sub 1.12}Zn{sub 0.88}, EuAg{sub 1.17}Zn{sub 0.83}, and EuAuZn. - Highlights: • Synthesis of new intermetallic zinc compounds SrAgZn and EuAgZn. • Ferromagnetic ordering of EuAgZn at 29 K. • Magnetic hyperfine field splitting in the {sup 151}Eu Mössbauer spectrum.

  12. Analysis of crystallization data in the Protein Data Bank

    SciTech Connect (OSTI)

    Kirkwood, Jobie; Hargreaves, David; O’Keefe, Simon; Wilson, Julie

    2015-09-23

    In a large-scale study using data from the Protein Data Bank, some of the many reported findings regarding the crystallization of proteins were investigated. The Protein Data Bank (PDB) is the largest available repository of solved protein structures and contains a wealth of information on successful crystallization. Many centres have used their own experimental data to draw conclusions about proteins and the conditions in which they crystallize. Here, data from the PDB were used to reanalyse some of these results. The most successful crystallization reagents were identified, the link between solution pH and the isoelectric point of the protein was investigated and the possibility of predicting whether a protein will crystallize was explored.

  13. Expert Meeting Report: Energy Savings You Can Bank On

    Energy Savers [EERE]

    Energy Savings You Can Bank On Mark Berman, Jeremy Springer, Pepper Smith, and Erik Porse Alliance for Residential Building Innovation )HEUXDU\ 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy,

  14. Ecoenergias | Open Energy Information

    Open Energy Info (EERE)

    Ecoenergias Jump to: navigation, search Name: Ecoenergias Place: Spain Sector: Solar Product: An investor in Solar Parks of Extremadura, with Deutsche Bank, to develop PV parks in...

  15. Hierarchical Ag/ZnO micro/nanostructure: Green synthesis and enhanced photocatalytic performance

    SciTech Connect (OSTI)

    Gao, Shuyan; Jia, Xiaoxia; Yang, Shuxia; Li, Zhengdao; Jiang, Kai

    2011-04-15

    Ag/ZnO metal-semiconductor nanocomposites with hierarchical micro/nanostructure have been prepared by the hydrothermal synthesis in the presence of bovine serum albumin (BSA). The results suggest that this biomolecule-assisted hydrothermal method is an efficient route for the fabrication of Ag/ZnO nanocomposites by using BSA both a shape controller and a reducing agent of Ag{sup +} ions. Moreover, Ag nanoparticles on the ZnO act as electron sinks, improving the separation of photogenerated electrons and holes, increasing the surface hydroxyl contents of ZnO, facilitating trapping the photoinduced electrons and holes to form more active hydroxyl radicals, and thus, enhancing the photocatalytic efficiency of ZnO. This is a good example for the organic combination of green chemistry and functional materials. -- Graphical Abstract: A green strategy is report to construct Ag/ZnO metal-semiconductor nanocomposites with hierarchical micro/nanostructure and enhanced photocatalytic activity. Display Omitted Research highlights: > Hierarchical micro/nanostructured Ag/ZnO nanocomposites have been prepared via a green route. > Ag nanoparticles improve the separation of photogenerated electrons and holes. > This facilitates trapping the photoinduced electrons and holes to form more hydroxyl radicals. Therefore, it enhances the photocatalytic efficiency of ZnO.

  16. Light-dependent controlled synthesis and photocatalytic properties of stable Ag{sub 3} nanocrystals

    SciTech Connect (OSTI)

    Wang, Jian-Dong; Liu, Jin-Ku; Luo, Chong-Xiao; Yang, Xiao-Hong

    2014-12-15

    The silver phosphate (Ag{sub 3}PO{sub 4}) is applied in organic matter photodegradation as a novel catalyst materials, however, its instability reduces the photocatalytic life and limits its further applications. In this work, a series of Ag{sub 3}PO{sub 4} crystalline nanoparticle clusters have been synthesized by a photocontrol method. By comparing their sunlight photocatalytic properties, the Ag{sub 3}PO{sub 4} nanoparticles with dominant (2 2 0) facets have a lower surface energy (1.05 J m{sup ?2}) than existing Ag{sub 3}PO{sub 4} crystals which can offer a longer catalyst service life. The photodegradation rate of the Ag{sub 3}PO{sub 4} nanoparticles is about 3 times that of common Ag{sub 3}PO{sub 4} bulk materials and the sunlight is used as the power source instead of high cost artificial visible light sources in this catalytic system. An effective continuous photodegradation reactor using Ag{sub 3}PO{sub 4} nanoparticles is successfully fabricated to degrade rhodamine B solution. At the same time, this work provides an example for how oxidation photocatalyst works without extra adding sacrificial reagent.

  17. A novel polythreading Ag(I) coordination polymer with blue photoluminescence

    SciTech Connect (OSTI)

    Duan, Xian-Ying; Yao, Jing; Lu, Chang-Sheng; Meng, Qing-Jin

    2013-04-15

    One new compound, [Ag(p-bix)]{sub 3}[Ag(Hbtc){sub 2}]·2H{sub 2}O (H{sub 3}btc=1,2,4-benzenetricarboxylate, p-bix=1,4-bis(imidazol-1-ylmethyl)-benzene), has been synthesized under hydrothermal conditions and characterized by elemental analysis, IR, PXRD, luminescent analysis, and single-crystal X-ray diffraction. X-ray structural analysis revealed that 0-D unit [Ag(Hbtc){sub 2}]{sup 3−} and two kinds of 1-D linear chain [Ag(p-bix)]{sub ∞}{sup +}, can be found within the crystal structure. The combination of 0-D [Ag(Hbtc){sub 2}]{sup 3−} unit and 1-D undulated chain [Ag1(p{sub 1}-bix)]{sub ∞}{sup +} through weak Ag–O bond gave rise to 2-D anionic supramolecular doublelayer. Then the grids of the 2-D layer are threaded by 1-D linear cationic chain [Ag2(p{sub 2}-bix)]{sub ∞}{sup +} to generate entangled 3-D architecture with unusual poly(pseudo-rotaxane)-type arrangements. Luminescent properties of the title complex were also studied in this paper. - Graphical abstract: Novel 3D polythreading supramolecular architecture was constructed, in which 1D linear cationic chains [Ag(p{sub 2}-bix)]{sub ∞}{sup +} threaded into the grid of weak Ag–O bonded anionic 2D sheet. Highlights: ► Novel 1D{sup +}+2D{sup −}→3D polythreading coordination complex was reported. ► Diverse conformations of p-bix result in different 1D [Ag(p-bix)]{sub ∞}{sup +} chains. ► The title complex displayed blue photoluminescence at room temperature.

  18. Microwave assisted hydrothermal synthesis of Ag/AgCl/WO{sub 3} photocatalyst and its photocatalytic activity under simulated solar light

    SciTech Connect (OSTI)

    Adhikari, Rajesh; Gyawali, Gobinda; Sekino, Tohru; Wohn Lee, Soo

    2013-01-15

    Simulated solar light responsive Ag/AgCl/WO{sub 3} composite photocatalyst was synthesized by microwave assisted hydrothermal process. The synthesized powders were characterized by X-Ray Diffraction (XRD) spectroscopy, X-Ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Diffuse Reflectance Spectroscopy (UV-Vis DRS), and BET surface area analyzer to investigate the crystal structure, morphology, chemical composition, optical properties and surface area of the composite photocatalyst. This photocatalyst exhibited higher photocatalytic activity for the degradation of rhodamine B under simulated solar light irradiation. Dye degradation efficiency of composite photocatalyst was found to be increased significantly as compared to that of the commercial WO{sub 3} nanopowder. Increase in photocatalytic activity of the photocatalyst was explained on the basis of surface plasmon resonance (SPR) effect caused by the silver nanoparticles present in the composite photocatalyst. Highlights: Black-Right-Pointing-Pointer Successful synthesis of Ag/AgCl/WO{sub 3} nanocomposite. Black-Right-Pointing-Pointer Photocatalytic experiment was performed under simulated solar light. Black-Right-Pointing-Pointer Nanocomposite photocatalyst was very active as compared to WO{sub 3} commercial powder. Black-Right-Pointing-Pointer SPR effect due to Ag nanoparticles enhanced the photocatalytic activity.

  19. Effect of Ag addition to L1{sub 0} FePt and L1{sub 0} FePd films grown by molecular beam epitaxy

    SciTech Connect (OSTI)

    Tokuoka, Y.; Seto, Y.; Kato, T.; Iwata, S.

    2014-05-07

    L1{sub 0} ordered FePt-Ag (5?nm) and FePd-Ag (5?nm) films were grown on MgO (001) substrate at temperatures of 250400?C by using molecular beam epitaxy method, and their crystal and surface structures, perpendicular magnetic anisotropies and Curie temperatures were investigated. In the case of FePt-Ag, Ag addition with the amount of 1020 at.?% was effective to promote L1{sub 0} ordering and granular growth, resulting in the increase of the perpendicular magnetic anisotropy and coercivity of the FePt-Ag films. On the other hand, in the case of FePd-Ag, Ag addition changed the surface morphology from island to continuous film associated with the reductions of its coercivity and perpendicular anisotropy. The variations of lattice constants and Curie temperature with Ag addition were significantly different between FePt-Ag and FePd-Ag. For FePd-Ag, the c and a axes lattice spacings and Curie temperature gradually changed with increasing Ag content, while they unchanged for FePt-Ag. These results suggest the possibility of the formation of FePdAg alloy in FePd-Ag, while Ag segregation in FePt-Ag.

  20. Longitudinal emittance measurements in the Booster and AGS during the 2014 RHIC gold run

    SciTech Connect (OSTI)

    Zeno, K.

    2014-08-18

    This note describes longitudinal emittance measurements that were made in the Booster and AGS during the 2014 RHIC Gold run. It also contains an overview of the longitudinal aspects of their setup during this run. Each bunch intended for RHIC is composed of beam from 4 Booster cycles, and there are two of them per AGS cycle. For each of the 8 Booster cycles required to produce the 2 bunches in the AGS, a beam pulse from EVIS is injected into the Booster and captured in four h=4 buckets. Then those bunches are accelerated to a porch where they are merged into 2 bunches and then into 1 bunch.

  1. Nucleation of AgInSbTe films employed in phase-change media (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Nucleation of AgInSbTe films employed in phase-change media Citation Details In-Document Search Title: Nucleation of AgInSbTe films employed in phase-change media In phase-change technology small volumes of a chalcogenide material are switched between amorphous and crystalline states by local heating with a short laser or current pulses. AgInSbTe is an alloy frequently used in optical data storage, which could also be applied in electronic data storage. For those

  2. Au-Ag Alloy Static High Pressure EOS measurements: FY09 summary of results

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Technical Report: Au-Ag Alloy Static High Pressure EOS measurements: FY09 summary of results Citation Details In-Document Search Title: Au-Ag Alloy Static High Pressure EOS measurements: FY09 summary of results Static high-pressure measurements of the equation of state of a Gold-Silver alloy (23.5 wt-% Ag) at room temperature were performed up to a pressure of approximately 100 GPA (1 megabar). Measurements were made using an energy-dispersive x-ray

  3. An overview of Booster and AGS polarized proton operation during Run 15

    SciTech Connect (OSTI)

    Zeno, K.

    2015-10-20

    This note is an overview of the Booster and AGS for the 2015 Polarized Proton RHIC run from an operations perspective. There are some notable differences between this and previous runs. In particular, the polarized source intensity was expected to be, and was, higher this year than in previous RHIC runs. The hope was to make use of this higher input intensity by allowing the beam to be scraped down more in the Booster to provide a brighter and smaller beam for the AGS and RHIC. The RHIC intensity requirements were also higher this run than in previous runs, which caused additional challenges because the AGS polarization and emittance are normally intensity dependent.

  4. Nanoscale structure in AgSbTe2 determined by diffuse elastic neutron scattering

    SciTech Connect (OSTI)

    Specht, Eliot D [ORNL; Ma, Jie [ORNL; Delaire, Olivier A [ORNL; Budai, John D [ORNL; May, Andrew F [ORNL; Karapetrova, Evguenia A. [Argonne National Laboratory (ANL)

    2015-01-01

    Diffuse elastic neutron scattering measurements confirm that AgSbTe2 has a hierarchical structure, with defects on length scales from nanometers to microns. While scattering from mesoscale structure is consistent with previously-proposed structures in which Ag and Sb order on a NaCl lattice, more diffuse scattering from nanoscale structure suggests a structural rearrangement in which hexagonal layers form a combination of (ABC), (ABA), and (AAB) stacking sequences. The AgCrSe2 structure is the best-fitting model for the local atomic arrangements.

  5. Simulations of Merging Helion Bunches on the AGS Injection Porch

    SciTech Connect (OSTI)

    Gardner, C. J.

    2014-08-29

    During the setup of helions for the FY2014 RHIC run it was discovered that the standard scheme for merging bunches on the AGS injection porch required an injection kicker pulse shorter than what was available. To overcome this difficulty, K. Zeno proposed and developed an interesting and unusual alternative which uses RF harmonic numbers 12, 4, 2 (rather than the standard 8, 4, 2) to merge 8 helion bunches into 2. In this note we carry out simulations that illustrate how the alternative scheme works and how it compares with the standard scheme. This is done in Sections 13 and 14. A scheme in which 6 bunches are merged into 1 is simulated in Section 15. This may be useful if more helions per merged bunch are needed in future runs. General formulae for the simulations are given in Sections 9 through 12. For completeness, Sections 1 through 8 give a derivation of the turn-by-turn equations of longitudinal motion at constant magnetic field. The derivation is based on the work of MacLachlan. The reader may wish to skip over these Sections and start with Section 9.

  6. Thermoelectric properties of AgSbTe? from first-principles calculations

    SciTech Connect (OSTI)

    Rezaei, Nafiseh; Akbarzadeh, Hadi; Hashemifar, S. Javad

    2014-09-14

    The structural, electronic, and transport properties of AgSbTe? are studied by using full-relativistic first-principles electronic structure calculation and semiclassical description of transport parameters. The results indicate that, within various exchange-correlation functionals, the cubic Fd3?m and trigonal R3?m structures of AgSbTe? are more stable than two other considered structures. The computed Seebeck coefficients at different values of the band gap and carrier concentration are accurately compared with the available experimental data to speculate a band gap of about 0.10.35 eV for AgSbTe? compound, in agreement with our calculated electronic structure within the hybrid HSE (Heyd-Scuseria-Ernzerhof) functional. By calculating the semiclassical Seebeck coefficient, electrical conductivity, and electronic part of thermal conductivity, we present the theoretical upper limit of the thermoelectric figure of merit of AgSbTe? as a function of temperature and carrier concentration.

  7. ZnO/Ag composite nanorod arrays for surface-plasmon-enhanced emission study

    SciTech Connect (OSTI)

    Pal, Anil Kumar E-mail: d.bharathimohan@gmail.com; Mohan, D. Bharathi E-mail: d.bharathimohan@gmail.com

    2014-04-24

    The surface plasmon resonance enhanced emission through coupling of surface plasmons and exciton band energies is studied in hybrid ZnO/Ag nanostructure. The catalytic growth of ZnO nanorods is controlled in seed mediated growth by altering size distribution of Ag nanoislands. X-ray diffraction shows a predominant (002) crystal plane confirming the preferential growth of ZnO nanorods on as-deposited Ag. Increase of surface roughness in Ag film by post deposition annealing process enhances the light emission due to momentum matching between surface plasmons and excitons as well as a red shift of 32 meV occurs due to multi phonon and phonon-exciton interaction.

  8. DEPARTlIiIENT OF ENERGY EERE PROJECT MAN AG EMENT CENTER NEPA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    lAUIl) u.s. DEPARTlIiIENT OF ENERGY EERE PROJECT MAN AG EMENT CENTER NEPA DETERMINATION RECIPIENT:Ocean Engineering and Energy Systems Intemational, Inc. (OCEES) Page lof3 STATE: ...

  9. Influence of Ag doping concentration on structural and optical properties of CdS thin film

    SciTech Connect (OSTI)

    Kumar, Pragati; Saxena, Nupur; Gupta, Vinay; Agarwal, Avinash

    2015-05-15

    This work shows the influence of Ag concentration on structural properties of pulsed laser deposited nanocrystalline CdS thin film. X-ray photoelectron spectroscopy (XPS) studies confirm the dopant concentration in CdS films and atomic concentration of elements. XPS studies show that the samples are slightly sulfur deficient. GAXRD scan reveals the structural phase transformation from cubic to hexagonal phase of CdS without appearance of any phase of CdO, Ag{sub 2}O or Ag{sub 2}S suggesting the substitutional doping of Ag ions. Photoluminescence studies illustrate that emission intensity increases with increase in dopant concentration upto 5% and then decreases for higher dopant concentration.

  10. Wetland mitigation banking for the oil and gas industry: Assessment, conclusions, and recommendations

    SciTech Connect (OSTI)

    Wilkey, P.L.; Sundell, R.C.; Bailey, K.A.; Hayes, D.C.

    1994-01-01

    Wetland mitigation banks are already in existence in the United States, and the number is increasing. To date, most of these banks have been created and operated for mitigation of impacts arising from highway or commercial development and have not been associated with the oil and gas industry. Argonne National Laboratory evaluated the positive and negative aspects of wetland mitigation banking for the oil and gas industry by examining banks already created for other uses by federal, state, and private entities. Specific issues addressed in this study include (1) the economic, ecological, and technical effectiveness of existing banks; (2) the changing nature of local, state, and federal jurisdiction; and (3) the unique regulatory and jurisdictional problems affecting bank developments associated with the oil and gas industry.

  11. Piezoelectric and luminescent properties of ZnO nanostructures on Ag films.

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: Piezoelectric and luminescent properties of ZnO nanostructures on Ag films. Citation Details In-Document Search Title: Piezoelectric and luminescent properties of ZnO nanostructures on Ag films. No abstract prepared. Authors: Tallant, David Robert ; Missert, Nancy A. ; Scrymgeour, David ; Voigt, James A. ; Liu, J. [1] ; Hsu, Julia, W. P. + Show Author Affiliations (.) Publication Date: 2006-11-01 OSTI Identifier: 898423 Report Number(s):

  12. Polarized Proton Acceleration in AGS and RHIC (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Polarized Proton Acceleration in AGS and RHIC Citation Details In-Document Search Title: Polarized Proton Acceleration in AGS and RHIC As the first hadron accelerator and collider consisting of two independent superconducting rings RHIC has operated with a wide range of beam energies and particle species including polarized proton beams. The acceleration of polarized beams in both the injector and the collider rings is complicated by numerous depolarizing spin resonances. Partial and

  13. HIGH ENERGY PULSED POWER SYSTEM FOR AGS SUPER NEUTRINO FOCUSING HORN.

    SciTech Connect (OSTI)

    ZHANG, S.Y.; SANDBERG, J.; WENG, W.-T.

    2005-05-16

    This paper present a preliminary design of a 300 kA, 2.5 Hz pulsed power system. This system will drive the focusing horn of proposed Brookhaven AGS Neutrino Super Beam Facility for Very Long Baseline Neutrino Oscillation Experiment. The peak output power of the horn pulsed power system will reach Giga-watts, and the upgraded AGS will be capable of delivering 1 MW in beam power.

  14. Banks Lake Fishery Evaluation Annual Report 2002-2003.

    SciTech Connect (OSTI)

    Polacek, Matt; Knuttgen, Kamia; Shipley, Rochelle

    2003-11-01

    The Washington Department of Fish and Wildlife implemented the Banks Lake Fishery Evaluation Project (BLFEP) in September 2001 with funds from the Bonneville Power Administration. Fiscal Year (FY) 2001 of the BLFEP was used to gather historic information, establish methods and protocols, collect limnology data, and conduct the first seasonal fish surveys. FY 2002 was used to continue seasonal fish and lakewide creel surveys and adjust methods and protocols as needed. Water quality parameters were collected monthly from February to May and bi-monthly from June to August. Banks Lake water temperatures began to increase in April and stratification was apparent by June at all 3 limnology collection sites. By late August, the thermocline had dropped to nearly 20 meters deep, with 16-17 C temperatures throughout the epilimnion. Dissolved oxygen levels were generally above 10 mg/L until August when dissolved oxygen dropped near or below 5 mg/L below 20-meters deep. Secchi depths ranged from 2.5-8 meters and varied by location and date. Nearshore and offshore fish surveys were conducted in October 2002 and May and July 2003 using boat electrofishing, fyke net, gill net, and hydroacoustic surveys. Yellow Perch Perca flavescens (32 %) and cottid spp. (22 %) dominated the nearshore species composition in October; however, by May yellow perch (12 %) were the third most common species followed by smallmouth bass Micropterous dolomieui (34 %) and lake whitefish Coregonus clupeaformis (14 %). Lake whitefish dominated the offshore catch during October (78 %) and May (81 %). Fish diet analysis indicated that juvenile fishes consumed primarily insects and zooplankton, while adult piscivores consumed cottids spp. and yellow perch most frequently. For FY 2002, the following creel statistics are comprehensive through August 31, 2003. The highest angling pressure occurred in June 2003, when anglers were primarily targeting walleye and smallmouth bass. Boat anglers utilized Steamboat State Park more frequently than any other boat ramp on Banks Lake. Shore anglers used the rock jetty at Coulee City Park 76 % of the time, with highest use occurring from November through April. An estimated total of 11,915 ({+-}140 SD) smallmouth bass, 6,412 ({+-}59 SD) walleye, 5,470 ({+-}260 SD) rainbow trout, and 1,949 ({+-}118 SD) yellow perch were harvested from Banks Lake in FY 2002. Only 3 kokanee were reported in the catch during the FY 2002 creel survey. In the future, data from the seasonal surveys and creel will be used to identify potential factors that may limit the production and harvest of kokanee, rainbow trout, and various spiny-rayed fishes in Banks Lake. The limiting factors that will be examined consist of: abiotic factors including water temperature, dissolved oxygen levels, habitat, exploitation and entrainment; and biotic factors including food limitation and predation. The BLFEP will also evaluate the success of several rearing and stocking strategies for hatchery kokanee in Banks Lake.

  15. Energetics of the formation of Cu-Ag core–shell nanoparticles

    SciTech Connect (OSTI)

    Chandross, Michael

    2014-10-06

    Our work presents molecular dynamics and Monte Carlo simulations aimed at developing an understanding of the formation of core–shell Cu-Ag nanoparticles. The effects of surface and interfacial energies were considered and used to form a phenomenological model that calculates the energy gained upon the formation of a core–shell structure from two previously distinct, non-interacting nanoparticles. In most cases, the core–shell structure was found to be energetically favored. Specifically, the difference in energy as a function of the radii of the individual Cu and Ag particles was examined, with the assumption that a core–shell structure forms. In general, it was found that the energetic gain from forming such a structure increased with increasing size of the initial Ag particle. This result was interpreted as a result of the reduction in surface energy. Moreover, for two separate particles, both Cu and Ag contribute to the surface energy; however, for a core–shell structure, the only contribution to the surface energy is from the Ag shell and the Cu contribution is changed to a Cu–Ag interfacial energy, which is always smaller.

  16. Energetics of the formation of Cu-Ag core–shell nanoparticles

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chandross, Michael

    2014-10-06

    Our work presents molecular dynamics and Monte Carlo simulations aimed at developing an understanding of the formation of core–shell Cu-Ag nanoparticles. The effects of surface and interfacial energies were considered and used to form a phenomenological model that calculates the energy gained upon the formation of a core–shell structure from two previously distinct, non-interacting nanoparticles. In most cases, the core–shell structure was found to be energetically favored. Specifically, the difference in energy as a function of the radii of the individual Cu and Ag particles was examined, with the assumption that a core–shell structure forms. In general, it was foundmore » that the energetic gain from forming such a structure increased with increasing size of the initial Ag particle. This result was interpreted as a result of the reduction in surface energy. Moreover, for two separate particles, both Cu and Ag contribute to the surface energy; however, for a core–shell structure, the only contribution to the surface energy is from the Ag shell and the Cu contribution is changed to a Cu–Ag interfacial energy, which is always smaller.« less

  17. Energetics of the formation of CuAg coreshell nanoparticles

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chandross, Michael

    2014-10-06

    Our work presents molecular dynamics and Monte Carlo simulations aimed at developing an understanding of the formation of coreshell CuAg nanoparticles. The effects of surface and interfacial energies were considered and used to form a phenomenological model that calculates the energy gained upon the formation of a coreshell structure from two previously distinct, non-interacting nanoparticles. In most cases, the coreshell structure was found to be energetically favored. Specifically, the difference in energy as a function of the radii of the individual Cu and Ag particles was examined, with the assumption that a coreshell structure forms. In general, it was foundmorethat the energetic gain from forming such a structure increased with increasing size of the initial Ag particle. This result was interpreted as a result of the reduction in surface energy. Moreover, for two separate particles, both Cu and Ag contribute to the surface energy; however, for a coreshell structure, the only contribution to the surface energy is from the Ag shell and the Cu contribution is changed to a CuAg interfacial energy, which is always smaller.less

  18. Synthesis and anti-bacterial activity of Cu, Ag and Cu-Ag alloy nanoparticles: A green approach

    SciTech Connect (OSTI)

    Valodkar, Mayur; Modi, Shefaly; Pal, Angshuman; Thakore, Sonal

    2011-03-15

    Research highlights: {yields} Synthesis of novel nanosized copper-silver alloys of different compositions. {yields} Completely green approach for synthesis of water soluble bimetallic nanoparticle. {yields} Interesting anti-bacterial activity of as synthesized metal and alloy nanoparticle. -- Abstract: Metallic and bimetallic nanoparticles of copper and silver in various proportions were prepared by microwave assisted chemical reduction in aqueous medium using the biopolymer, starch as a stabilizing agent. Ascorbic acid was used as the reducing agent. The silver and copper nanoparticles exhibited surface plasmon absorption resonance maxima (SPR) at 416 and 584 nm, respectively; while SPR for the Cu-Ag alloys appeared in between depending on the alloy composition. The SPR maxima for bimetallic nanoparticles changes linearly with increasing copper content in the alloy. Transmission electron micrograph (TEM) showed monodispersed particles in the range of 20 {+-} 5 nm size. Both silver and copper nanoparticles exhibited emission band at 485 and 645 nm, respectively. The starch-stabilized nanoparticles exhibited interesting antibacterial activity with both gram positive and gram negative bacteria at micromolar concentrations.

  19. Case Study: Fuel Cells Increase Reliability at First National Bank of Omaha

    SciTech Connect (OSTI)

    2010-12-31

    A case study of the First National Bank of Omaha fuel cell system, covering 1999 through October 2009. The system reduced heating bills by more than $1 million.

  20. Tips for Running an Air Conditioner Without Breaking the Bank | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Tips for Running an Air Conditioner Without Breaking the Bank Tips for Running an Air Conditioner Without Breaking the Bank July 22, 2014 - 3:15pm Addthis Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Elizabeth Spencer

  1. World Bank-The Role of Nonmotorized Transport | Open Energy Informatio...

    Open Energy Info (EERE)

    Website: siteresources.worldbank.orgINTURBANTRANSPORTResourceschapter9.pdf Cost: Free World Bank-Role of Nonmotorized Transport Screenshot References: The Role of...

  2. Radiological Worker (RW) and Radiological Control Technician (RCT) Training Exam Banks

    Broader source: Energy.gov [DOE]

    Examination banks are available to DOE Contractors for use with the radiation safety training Handbooks. Questions and answers for these courses have also been prepared by DOE.

  3. Case Study: Fuel Cells Increase Reliability at First National Bank of Omaha

    Fuel Cell Technologies Publication and Product Library (EERE)

    A case study of the First National Bank of Omaha fuel cell system, covering 1999 through October 2009. The system reduced heating bills by more than $1 million.

  4. Data banks for risk assessment at the Savannah River Site

    SciTech Connect (OSTI)

    Durant, W.S.; Townsend, C.S.; Baughman, D.F.; Hang, P.

    1992-01-01

    One of the lessons learned from many years of risk assessment experience is that mistakes of the past are soon forgotten if no method is available to retrieve and review these events. Savannah River Site has maintained a computerized data bank system for recording, retrieving and reviewing its incident history. The system is based on a series of compilations developed primarily for risk assessment but has been found to be invaluable for many other uses such as equipment reliability, project justification, and incident investigations.

  5. Data banks for risk assessment at the Savannah River Site

    SciTech Connect (OSTI)

    Durant, W.S.; Townsend, C.S.; Baughman, D.F.; Hang, P.

    1992-11-01

    One of the lessons learned from many years of risk assessment experience is that mistakes of the past are soon forgotten if no method is available to retrieve and review these events. Savannah River Site has maintained a computerized data bank system for recording, retrieving and reviewing its incident history. The system is based on a series of compilations developed primarily for risk assessment but has been found to be invaluable for many other uses such as equipment reliability, project justification, and incident investigations.

  6. Synthesis and characterization of novel WO{sub 3} loaded AgZnO and its photocatalytic activity

    SciTech Connect (OSTI)

    Subash, B.; Krishnakumar, B.; Pandiyan, V.; Swaminathan, M.; Shanthi, M.

    2013-01-15

    Graphical abstract: Display Omitted Highlights: ? A novel WO{sub 3} loaded AgZnO was prepared by a simple solvothermal method. ? Ag traps the electron from both ZnO and WO{sub 3} reducing electrohole recombination. ? WO{sub 3}AgZnO is more efficient than AgZnO, WO{sub 3}ZnO, AgWO{sub 3} and undoped catalysts. ? WO{sub 3}AgZnO material will be much useful for the treatment of dye effluents. -- Abstract: A novel WO{sub 3} loaded AgZnO photocatalyst was successfully synthesized by a simple solvothermal method and characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) images, energy dispersive spectrum (EDS), diffuse reflectance spectra (DRS), photoluminescence spectra (PL), cyclic voltammetry (CV) and BrunauerEmmettTeller (BET) surface area measurements. The photocatalytic activity of WO{sub 3}AgZnO was investigated for the degradation of RR 120 and RO 4 dyes in aqueous solution using UV-A light. WO{sub 3}AgZnO is found to be more efficient than AgZnO, WO{sub 3}ZnO, AgWO{sub 3}, commercial ZnO, prepared ZnO, TiO{sub 2}-P25 and TiO{sub 2} (Merck) at neutral pH for the mineralization of dyes. First time we have reported that novel WO{sub 3} loaded AgZnO has been found to be very efficient for two azo dyes removal when compared to commercially available catalyst (Degussa P25, ZnO (Merck) and TiO{sub 2} (Merck)). The mineralization of dyes has been confirmed by chemical oxygen demand (COD) measurements. A mechanism of degradation has been proposed for the higher efficiency of WO{sub 3}AgZnO.

  7. THE AGS-BASED SUPER NEUTRINO BEAM FACILITY CONCEPTUAL DESIGN REPORT

    SciTech Connect (OSTI)

    WENG,W.T.; DIWAN,M.; RAPARIA,D.

    2004-10-08

    After more than 40 years of operation, the AGS is still at the heart of the Brookhaven hadron accelerator complex. This system of accelerators presently comprises a 200 MeV linac for the pre-acceleration of high intensity and polarized protons, two Tandem Van der Graaffs for the pre-acceleration of heavy ion beams, a versatile Booster that allows for efficient injection of all three types of beams into the AGS and, most recently, the two RHIC collider rings that produce high luminosity heavy ion and polarized proton collisions. For several years now, the AGS has held the world intensity record with more than 7 x 10{sup 13} protons accelerated in a single pulse. The requirements for the proton beam for the super neutrino beam are summarized and a schematic of the upgraded AGS is shown. Since the present number of protons per fill is already close to the required number, the upgrade is based on increasing the repetition rate and reducing beam losses (to avoid excessive shielding requirements and to maintain activation of the machine components at workable level). It is also important to preserve all the present capabilities of the AGS, in particular its role as injector to RHIC. The AGS Booster was built not only to allow the injection of any species of heavy ion into the AGS but to allow a fourfold increase of the AGS intensity. It is one-quarter the circumference of the AGS with the same aperture. However, the accumulation of four Booster loads in the AGS takes about 0.6 s, and is therefore not well suited for high average beam power operation. To minimize the injection time to about 1 ms, a 1.2 GeV linac will be used instead. This linac consists of the existing warm linac of 200 MeV and a new superconducting linac of 1.0 GeV. The multi-turn H{sup -} injection from a source of 30 mA and 720 {micro}s pulse width is sufficient to accumulate 9 x 10{sup 13} particle per pulse in the AGS[10]. The minimum ramp time of the AGS to full energy is presently 0.5 s; this must be upgraded to 0.2 s to reach the required repetition rate of 2.5 Hz. The required upgrade of the AGS power supply, the rf system, and other rate dependent accelerator issues is discussed. The design of the target/horn configuration is shown. The material selected for the proton target is a Carbon-Carbon composite. It is a 3-dimensional woven material that exhibits extremely low thermal expansion for temperatures up to 1000 C; for higher temperatures it responds like graphite. This property is important for greatly reducing the thermo-elastic stresses induced by the beam, thereby extending the life of the target. The target consists of a 80 cm long cylindrical rod of 12 mm diameter. The target intercepts a 2 mm rms proton beam of 10{sup 14} protons/pulse. The total energy deposited as heat in the target is 7.3 kJ with peak temperature rise of about 280 C. Heat will be removed from the target through forced convection of helium gas across its outside surface. The extracted proton beam uses an existing beamline at the AGS, but is then directed to a target station atop a constructed earthen hill. The target is followed by a downward slopping pion decay channel. This vertical arrangement keeps the target and decay pipe well above the water table in this area. The 11.3 degrees slope aims the neutrino beam at a water Cerenkov neutrino detector to be located in the Homestake mine at Lead, South Dakota. A 3-dimensional view of the beam transport line, target station, and decay tunnel is provided.

  8. Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO{sub 3} nanowires

    SciTech Connect (OSTI)

    Liu, Eryong; Gao, Yimin; Bai, Yaping; Yi, Gewen; Wang, Wenzhen; Zeng, Zhixiang; Jia, Junhong

    2014-11-15

    Silver vanadate (AgVO{sub 3}) nanowires were synthesized by hydrothermal method and self-lubricating NiAl/Mo-AgVO{sub 3} composites were fabricated by powder metallurgy technique. The composition and microstructure of NiAl/Mo-based composites were characterized and the tribological properties were investigated from room temperature to 900 C. The results showed that NiAl/Mo-based composites were consisted of nanocrystalline B2 ordered NiAl matrix, Al{sub 2}O{sub 3}, Mo{sub 2}C, metallic Ag and vanadium oxide phase. The appearance of metallic Ag and vanadium oxide phase can be attributed to the decomposition of AgVO{sub 3} during sintering. Wear testing results confirmed that NiAl/Mo-based composites have excellent tribological properties over a wide temperature range. For example, the friction coefficient and wear rate of NiAl/Mo-based composites containing AgVO{sub 3} were significantly lower than the composites containing only metallic Mo or AgVO{sub 3} lubricant when the temperature is above 300 C, which can be attributed to the synergistic lubricating action of metallic Mo and AgVO{sub 3} lubricants. Furthermore, Raman results indicated that the composition on the worn surface of NiAl-based composites was self-adjusted after wear testing at different temperatures. For example, Ag{sub 3}VO{sub 4} and Fe{sub 3}O{sub 4} lubricants were responsible for the improvement of tribological properties at 500 C, AgVO{sub 3}, Ag{sub 3}VO{sub 4} and molybdate for 700 C, and AgVO{sub 3} and molybdate for 900 C of NiAl-based composites with the addition of metallic Mo and AgVO{sub 3}. - Highlights: NiAl/Mo-AgVO{sub 3} nanocomposites were prepared by mechanical alloying and sintering. AgVO{sub 3} decomposed to metallic Ag and vanadium oxide during the sintering process. NiAl/Mo-AgVO{sub 3} exhibited superior tribological properties at a board temperature range. Phase composition on the worn surface was varied with temperatures. Self-adjusted action was responsible for the improvement of tribological properties.

  9. Progress in Solving the Elusive Ag Transport Mechanism in TRISO Coated Particles: What is new?

    SciTech Connect (OSTI)

    Isabella Van Rooyen

    2014-10-01

    The TRISO particle for HTRs has been developed to an advanced state where the coating withstands internal gas pressures and retains fission products during irradiation and under postulated accidents. However, one exception is Ag that has been found to be released from high quality TRISO coated particles when irradiated and can also during high temperature accident heating tests. Although out- of- pile laboratory tests have never hither to been able to demonstrate a diffusion process of Ag in SiC, effective diffusion coefficients have been derived to successfully reproduce measured Ag-110m releases from irradiated HTR fuel elements, compacts and TRISO particles It was found that silver transport through SiC does not proceed via bulk volume diffusion. Presently grain boundary diffusion that may be irradiation enhanced either by neutron bombardment or by the presence of fission products such as Pd, are being investigated. Recent studies of irradiated AGR-1 TRISO fuel using scanning transmission electron microscopy (STEM), transmission kukuchi diffraction (TKD) patterns and high resolution transmission electron microscopy (HRTEM) have been used to further the understanding of Ag transport through TRISO particles. No silver was observed in SiC grains, but Ag was identified at triple-points and grain boundaries of the SiC layer in the TRISO particle. Cadmium was also found in some of the very same triple junctions, but this could be related to silver behavior as Ag-110m decays to Cd-110. Palladium was identified as the main constituent of micron-sized precipitates present at the SiC grain boundaries and in most SiC grain boundaries and the potential role of Pd in the transport of Ag will be discussed.

  10. Materials experience of the public domain portions of Tube Bank E' during Test Series A2

    SciTech Connect (OSTI)

    Not Available

    1990-06-01

    The tube banks at the Grimethorpe pressurized fluidized bed combustion facility are discussed. Tube Bank E'' was designed for operation as the in bed heat exchanger during Test Series A2 at the Grimethorpe PFBC Establishment between March and November 1987. The supply of the tube bank resulted from an agreement between Foster Wheeler Development Corporation (FWDC), the US Department of Energy, and the Operating Agent for the British Coal/CEGB Joint Programme on PFBC. The tube bank incorporated features, designed to produce acceptable and predictable wastage characteristics, suggested by both FWDC and BCC/CEGB interests. As part of the agreement between the various parties, it was agreed only data from 55% of the tube bank would enter the public domain. This report describes the tube bank, and describes and discusses the public domain wastage results following a total operating period approaching 1450 hours. It is concluded that although conditions varied throughout Test Series A2, there were no major differences in the aggressiveness of the bed. Armouring devices suggested by FWDC were not successful, but their chromised coatings offered promise. The results from UK proprietary parts of the tube bank indicated that the tube bank metal wastage need not be a life limiting problem for PFBC in-bed heat exchangers. 5 refs., 48 figs., 6 tabs.

  11. Radiation from Ag high energy density Z-pinch plasmas and applications to lasing

    SciTech Connect (OSTI)

    Weller, M. E. Safronova, A. S.; Kantsyrev, V. L.; Esaulov, A. A.; Shrestha, I.; Stafford, A.; Keim, S. F.; Shlyaptseva, V. V.; Osborne, G. C.; Petkov, E. E.; Apruzese, J. P.; Giuliani, J. L.; Chuvatin, A. S.

    2014-03-15

    Silver (Ag) wire arrays were recently introduced as efficient x-ray radiators and have been shown to create L-shell plasmas that have the highest electron temperature (>1.8?keV) observed on the Zebra generator so far and upwards of 30?kJ of energy output. In this paper, results of single planar wire arrays and double planar wire arrays of Ag and mixed Ag and Al that were tested on the UNR Zebra generator are presented and compared. To further understand how L-shell Ag plasma evolves in time, a time-gated x-ray spectrometer was designed and fielded, which has a spectral range of approximately 3.55.0?. With this, L-shell Ag as well as cold L{sub ?} and L{sub ?} Ag lines was captured and analyzed along with photoconducting diode (PCD) signals (>0.8?keV). Along with PCD signals, other signals, such as filtered XRD (>0.2?keV) and Si-diodes (SiD) (>9?keV), are analyzed covering a broad range of energies from a few eV to greater than 53?keV. The observation and analysis of cold L{sub ?} and L{sub ?} lines show possible correlations with electron beams and SiD signals. Recently, an interesting issue regarding these Ag plasmas is whether lasing occurs in the Ne-like soft x-ray range, and if so, at what gains? To help answer this question, a non-local thermodynamic equilibrium (LTE) kinetic model was utilized to calculate theoretical lasing gains. It is shown that the Ag L-shell plasma conditions produced on the Zebra generator at 1.7 maximum current may be adequate to produce gains as high as 6?cm{sup ?1} for various 3p???3s transitions. Other potential lasing transitions, including higher Rydberg states, are also included in detail. The overall importance of Ag wire arrays and plasmas is discussed.

  12. Characterization of Na+- beta-Zeolite Supported Pd and Pd Ag Bimetallic Catalysts using EXAFS, TEM and Flow Reactor

    SciTech Connect (OSTI)

    Huang,W.; Lobo, R.; Chen, J.

    2008-01-01

    Flow reactor studies of the selective hydrogenation of acetylene in the presence of ethylene have been performed on Na+ exchanged {beta}-zeolite supported Pd, Ag and PdAg catalysts, as an extension of our previous batch reactor studies [W. Huang, J.R. McCormick, R.F. Lobo, J.G. Chen, J. Catal. 246 (2007) 40-51]. Results from flow reactor studies show that the PdAg/Na+-{beta}-zeolite bimetallic catalyst has lower activity than Pd/Na+-{beta}-zeolite monometallic catalyst, while Ag/Na+-{beta}-zeolite does not show any activity for acetylene hydrogenation. However, the selectivity for the PdAg bimetallic catalyst is much higher than that for either the Pd catalyst or Ag catalyst. The selectivity to byproduct (ethane) is greatly inhibited on the PdAg bimetallic catalyst as well. The results from the current flow reactor studies confirmed the pervious results from batch reactor studies [W. Huang, J.R. McCormick, R.F. Lobo, J.G. Chen, J. Catal. 246 (2007) 40-51]. In addition, we used transmission electron microscope (TEM), extended X-ray absorption fine structure (EXAFS), and FTIR of CO adsorption to confirm the formation of Pd-Ag bimetallic alloy in the PdAg/Na+-{beta}-zeolite catalyst.

  13. Determination of Desorbed Species During Heating of AgI-Mordenite Provided by ORNL

    SciTech Connect (OSTI)

    Croes, Kenneth James; Garino, Terry J.; Mowry, Curtis D.; Nenoff, Tina M.

    2015-12-15

    This study is focused on describing the desorbed off gases due to heating of the AgIMordenite (MOR) produced at ORNL for iodine (I2) gas capture from nuclear fuel aqueous reprocessing. In particular, the interest is for the incorporation of the AgI-MOR into a waste form, which might be the Sandia developed, low temperature sintering, Bi-Si oxide based, Glass Composite Material (GCM). The GCM has been developed as a waste form for the incorporation any oxide based getter material. In the case where iodine may be released during the sintering process of the GCM, additional Ag flake is added as further insurance in total iodine capture and retention. This has been the case for the incorporated ORNL developed AgIMOR. Thermal analysis studies were carried out to determine off gasing processes of ORNL AgIMOR. Independent of sample size, ~7wt% of total water is desorbed by 225°C. This includes both bulk surface and occluded water, and are monitored as H2O and OH. Of that total, ~5.5wt% is surface water which is removed by 125°C, and 1.5wt% is occluded (in zeolite pore) water. Less than ~1 wt% total water continues to desorb, but is completely removed by 500°C. Above 300°C, the detectable remaining desorbing species observed are iodine containing compounds, including I and I2.

  14. Banking on Solar: Debt Finance in Today's Distributed Market (Poster)

    SciTech Connect (OSTI)

    Louder, T.

    2014-10-01

    Over the last two years, several entities - from banks to credit unions to solar finance companies -have rolled out distributed solar-specific loan programs in the United States. These solar-specific loans are a distinct loan in that the underwriting, loan terms, lender security interest, and other programmatic aspects are designed exclusively for the financing of solar installations. Until recently, loan financing for distributed solar installations was largely through home equity loans, commercial loans, and other standardized loan products available to homeowners and businesses for general expenditures. However, as the U.S. solar market matures, so too are its financing options, and solar-specific loans stand to gain market share. This poster was presented at the Solar Power International conference in Las Vegas, NV in October 2014.

  15. Formation mechanism and properties of CdS-Ag2S nanorod superlattices

    SciTech Connect (OSTI)

    Wang, Lin-Wang; Demchenko, Denis O.; Robinson, Richard D.; Sadtler, Bryce; Erdonmez, Can K.; Alivisatos, A. Paul; Wang, Lin-Wang

    2008-08-11

    The mechanism of formation of recently fabricated CdS-Ag{sub 2}S nanorod superlattices is considered and their elastic properties are predicted theoretically based on experimental structural data. We consider different possible mechanisms for the spontaneous ordering observed in these 1D nanostructures, such as diffusion-limited growth and ordering due to epitaxial strain. A simplified model suggests that diffusion-limited growth partially contributes to the observed ordering, but cannot account for the full extent of the ordering alone. The elastic properties of bulk Ag{sub 2}S are predicted using a first principles method and are fed into a classical valence force field (VFF) model of the nanostructure. The VFF results show significant repulsion between Ag{sub 2}S segments, strongly suggesting that the interplay between the chemical interface energy and strain due to the lattice mismatch between the two materials drives the spontaneous pattern formation.

  16. Ag-Pd-Cu alloy inserted transparent indium tin oxide electrodes for organic solar cells

    SciTech Connect (OSTI)

    Kim, Hyo-Joong; Seo, Ki-Won; Kim, Han-Ki; Noh, Yong-Jin; Na, Seok-In

    2014-09-01

    The authors report on the characteristics of Ag-Pd-Cu (APC) alloy-inserted indium tin oxide (ITO) films sputtered on a glass substrate at room temperature for application as transparent anodes in organic solar cells (OSCs). The effect of the APC interlayer thickness on the electrical, optical, structural, and morphological properties of the ITO/APC/ITO multilayer were investigated and compared to those of ITO/Ag/ITO multilayer electrodes. At the optimized APC thickness of 8 nm, the ITO/APC/ITO multilayer exhibited a resistivity of 8.55 × 10{sup −5} Ω cm, an optical transmittance of 82.63%, and a figure-of-merit value of 13.54 × 10{sup −3} Ω{sup −1}, comparable to those of the ITO/Ag/ITO multilayer. Unlike the ITO/Ag/ITO multilayer, agglomeration of the metal interlayer was effectively relieved with APC interlayer due to existence of Pd and Cu elements in the thin region of the APC interlayer. The OSCs fabricated on the ITO/APC/ITO multilayer showed higher power conversion efficiency than that of OSCs prepared on the ITO/Ag/ITO multilayer below 10 nm due to the flatness of the APC layer. The improved performance of the OSCs with ITO/APC/ITO multilayer electrodes indicates that the APC alloy interlayer prevents the agglomeration of the Ag-based metal interlayer and can decrease the thickness of the metal interlayer in the oxide-metal-oxide multilayer of high-performance OSCs.

  17. Element-specific study of epitaxial NiO/Ag/CoO/Fe films grown on vicinal Ag(001) using photoemission electron microscopy

    SciTech Connect (OSTI)

    Meng, Y.; Li, J.; Tan, A.; Jin, E.; Son, J.; Park, J. S.; Doran, A.; Young, A. T.; Scholl, A.; Arenholz, E.; Wu, J.; Hwang, C.; Zhao, H. W.; Qiu, Z. Q.

    2011-01-10

    NiO/Ag/CoO/Fe single crystalline films are grown epitaxially on a vicinal Ag(001) substrate using molecular beam epitaxy and investigated by photoemission electron microscopy. We find that after zero-field cooling, the in-plane Fe magnetization switches from parallel to perpendicular direction of the atomic steps of the vicinal surface at thinner CoO thickness but remains in its original direction parallel to the steps at thicker CoO thickness. CoO and NiO domain imaging result shows that both CoO/Fe and NiO/CoO spins are perpendicularly coupled, suggesting that the Fe magnetization switching may be associated with the rotatable-frozen spin transition of the CoO film.

  18. Monitoring Galvanic Replacement of Ag Nanoparticles by Pd using Low Dose In

    Office of Scientific and Technical Information (OSTI)

    Situ Liquid S/TEM. (Conference) | SciTech Connect Conference: Monitoring Galvanic Replacement of Ag Nanoparticles by Pd using Low Dose In Situ Liquid S/TEM. Citation Details In-Document Search Title: Monitoring Galvanic Replacement of Ag Nanoparticles by Pd using Low Dose In Situ Liquid S/TEM. Abstract not provided. Authors: Jungjohann, Katherine Leigh Publication Date: 2013-08-01 OSTI Identifier: 1106551 Report Number(s): SAND2013-6522C 465022 DOE Contract Number: AC04-94AL85000 Resource

  19. Electron transport in carbon nanotube/RbAg{sub 4}I{sub 5} film composite

    Office of Scientific and Technical Information (OSTI)

    nanostructures modulated by optical field (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: Electron transport in carbon nanotube/RbAg{sub 4}I{sub 5} film composite nanostructures modulated by optical field Citation Details In-Document Search Title: Electron transport in carbon nanotube/RbAg{sub 4}I{sub 5} film composite nanostructures modulated by optical field We explore the transport properties of mixed ionic-electronic conductors made of carbon

  20. The U5+ compound Ba9Ag10U4S24: Synthesis, structure, and electronic

    Office of Scientific and Technical Information (OSTI)

    properties (Journal Article) | DOE PAGES The U5+ compound Ba9Ag10U4S24: Synthesis, structure, and electronic properties This content will become publicly available on January 26, 2017 « Prev Next » Title: The U5+ compound Ba9Ag10U4S24: Synthesis, structure, and electronic properties Authors: Mesbah, Adel ; Stojko, Wojciech ; Lebègue, Sébastien ; Malliakas, Christos D. ; Frazer, Laszlo ; Ibers, James A. Publication Date: 2015-01-01 OSTI Identifier: 1246692 Grant/Contract Number: Grant

  1. Case Study: Fuel Cells Increase Reliability at First National Bank of Omaha

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Increase Reliability at First National Bank of Omaha Case Study: Fuel Cells Increase Reliability at First National Bank of Omaha First National Bank of Omaha installed a fuel cell system in 1999 to provide primary power to its data center in Omaha, Nebraska. In more than 89,000 hours of operation through October 2009, the system is estimated to have reduced heating bills by more than $1 million. An independent third party verified that the designed total power system

  2. Energy Secretary Moniz and Export-Import Bank Chairman Hochberg to Visit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    First Solar Facility in Perrysburg, Ohio | Department of Energy Secretary Moniz and Export-Import Bank Chairman Hochberg to Visit First Solar Facility in Perrysburg, Ohio Energy Secretary Moniz and Export-Import Bank Chairman Hochberg to Visit First Solar Facility in Perrysburg, Ohio February 14, 2015 - 6:35pm Addthis News Media Contact 202 586 4940 RSVP@hq.doe.gov Energy Secretary Moniz and Export-Import Bank Chairman Hochberg to Visit First Solar Facility in Perrysburg, Ohio WASHINGTON- On

  3. In-bed tube bank for a fluidized-bed combustor

    DOE Patents [OSTI]

    Hemenway, Jr., Lloyd F.

    1990-01-01

    An in-bed tube bank (10) for a fluidized bed combustor. The tube bank (10) of the present invention comprises one or more fluid communicating boiler tubes (30) which define a plurality of selectively spaced boiler tube sections (32). The tube sections (32) are substantially parallel to one another and aligned in a common plane. The tube bank (10) further comprises support members (34) for joining adjacent tube sections (32), the support members (34) engaging and extending along a selected length of the tube sections (32) and spanning the preselected space therebetween.

  4. Thermoelectric transport of Se-rich Ag{sub 2}Se in normal phases and phase transitions

    SciTech Connect (OSTI)

    Mi, Wenlong; Lv, Yanhong; Qiu, Pengfei; Shi, Xun E-mail: cld@mail.sic.ac.cn; Chen, Lidong E-mail: cld@mail.sic.ac.cn; Zhang, Tiansong

    2014-03-31

    Small amount of Se atoms are used to tune the carrier concentrations (n{sub H}) and electrical transport in Ag{sub 2}Se. Significant enhancements in power factor and thermoelectric figure of merit (zT) are observed in the compositions of Ag{sub 2}Se{sub 1.06} and Ag{sub 2}Se{sub 1.08}. The excessive Se atoms do not change the intrinsically electron-conducting character in Ag{sub 2}Se. The detailed analysis reveals the experiment optimum carrier concentration in Ag{sub 2}Se is around 5??10{sup 18}?cm{sup ?3}. We also investigate the temperature of maximum zT and the thermoelectric transport during the first order phase transitions using the recently developed measurement system.

  5. H{sub 2}AgCl: A spectroscopic study of a dihydrogen complex

    SciTech Connect (OSTI)

    Grubbs, G. S.; Obenchain, Daniel A.; Pickett, Herbert M.; Novick, Stewart E.

    2014-09-21

    H{sub 2}AgCl has been observed on a Fourier transform microwave spectrometer equipped with laser ablation source and determined to be a dihydrogen complex. Transitions up to J = 32 have been measured and analyzed for four isotopologues of the complex containing ortho and para H{sub 2}. The ortho and para spin states have been included in one fit, a deviation from the typical H{sub 2} complex. Rotational constants B and C, centrifugal distortion constants ?{sub J} and ?{sub JK}, nuclear electric quadrupole coupling constants ?{sub aa}, ?{sub bb}, and ?{sub cc} for {sup 35}Cl and {sup 37}Cl have been fit for both spin states while nuclear spin-nuclear spin constants D{sub aa}, D{sub bb}, and D{sub cc}, and nuclear spin-rotation constant C{sub aa} have been reported for the ortho spin state. Quantum chemical calculations predict a strong bonding interaction and the strength of the complex has been related to reported ?{sub aa} and ?{sub J} values amongst a host of comparable species, including the AgCl monomer itself. Bond lengths have been determined for AgCl, AgH{sub 2} center-of-mass, and HH and are reported.

  6. A Novel Thermal Electrochemical Synthesis Method for Production of Stable Colloids of "Naked" Metal (Ag) Nanocrystals

    SciTech Connect (OSTI)

    Hu, Michael Z.; Easterly, Clay E

    2009-01-01

    Solution synthesis of nanocrystal silver is reviewed. This paper reports a novel thermal electrochemical synthesis (TECS) for producing metal Ag nanocrystals as small as a few nanometers. The TECS method requires mild conditions (25-100oC), low voltage (1-50 V DC) on Ag electrodes, and simple water or aqueous solutions as reaction medium. Furthermore, a tubular dialysis membrane surround electrodes proves favorable to produce nanosized (<10 nm) Ag nanocrystals. Different from those nanocrystals reported in literature, our nanocrystals have several unique features: (1) small nanometer size, (2) nakedness , i.e., surfaces of metal nanocrystals are free of organic ligands or capping molecules and no need of dispersant in synthesis solutions, and (3) colloidally stable in water solutions. It was discovered that Ag nanoparticles with initially large size distribution can be homogenized into near-monodispersed system by a low power (< 15 mW) He-Ne laser exposure treatment. The combination of the TECS technique and the laser treatment could lead to a new technology that produces metal nanoparticles that are naked, stable, and uniform sized. In the presence of stabilizing agent (also as supporting electrolyte) such as polyvinyl alcohol (PVA), large yield of silver nanoparticles (<100nm) in the form of thick milky sols are produced.

  7. FY2014 Parameters for Gold Ions in Booster, AGS, and RHIC

    SciTech Connect (OSTI)

    Gardner, C. J.

    2014-07-30

    The nominal parameters for gold ions in Booster, AGS, and RHIC are given for the FY2014 running period. The parameters are worked out using various formulas to derive mass, kinetic parameters, RF parameters, ring parameters, etc.. The ''standard setup'', ''medium-energy'', and ''low-energy'' parameters are summarized in separate sections.

  8. FY2014 Parameters for Helions and Gold Ions in Booster, AGS, and RHIC

    SciTech Connect (OSTI)

    Gardner, C. J.

    2014-08-15

    The nominal parameters for helions (helion is the bound state of two protons and one neutron, the nucleus of a helium-3 atom) and gold ions in Booster, AGS, and RHIC are given for the FY2014 running period. The parameters are found using various formulas to derive mass, helion anomalous g-factor, kinetic parameters, RF parameters, ring parameters, etc..

  9. Irradiation-induced Ag nanocluster nucleation in silicate glasses: Analogy with photography

    SciTech Connect (OSTI)

    Espiau de Lamaestre, R.; Bea, H.; Bernas, H.; Belloni, J.; Marignier, J. L.

    2007-11-15

    The synthesis of Ag nanoclusters in soda lime silicate glasses and silica was studied by optical absorption and electron spin resonance experiments under both low (gamma ray) and high (MeV ion) deposited energy density irradiation conditions. Both types of irradiation create electrons and holes whose density and thermal evolution--notably via their interaction with defects--are shown to determine the clustering and growth rates of Ag nanocrystals. We thus establish the influence of redox interactions of defects and silver (poly)ions. The mechanisms are similar to the latent image formation in photography: Irradiation-induced photoelectrons are trapped within the glass matrix, notably on dissolved noble metal ions and defects, which are thus neutralized (reverse oxidation reactions are also shown to exist). Annealing promotes metal atom diffusion, which, in turn, leads to cluster nuclei formation. The cluster density depends not only on the irradiation fluence but also--and primarily--on the density of deposited energy and the redox properties of the glass. Ion irradiation (i.e., large deposited energy density) is far more effective in cluster formation, despite its lower neutralization efficiency (from Ag{sup +} to Ag{sup 0}) as compared to gamma photon irradiation.

  10. PdAgAu alloy with high resistance to corrosion by H{sub 2}S

    SciTech Connect (OSTI)

    Braun, Fernando; Miller, James B.; Gellman, Andrew J.; Tarditi, Ana M.; Fleutot, Benoit; Petro, Kondratyuk, Cornaglia, Laura M

    2012-12-01

    PdAgAu alloy films were prepared on porous stainless steel supports by sequential electroless deposition. Two specific compositions, Pd{sub 83}Ag{sub 2}Au{sub 15} and Pd{sub 74}Ag{sub 14}Au{sub 12}, were studied for their sulfur tolerance. The alloys and a reference Pd foil were exposed to 1000 H{sub 2}S/H{sub 2} at 623 K for periods of 3 and 30 hours. The microstructure, morphology and bulk composition of both nonexposed and H{sub 2}S-exposed samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). XRD and SEM analysis revealed time-dependent growth of a bulk Pd{sub 4}S phase on the Pd foil during H{sub 2}S exposure. In contrast, the PdAgAu ternary alloys displayed the same FCC structure before and after H{sub 2}S exposure. In agreement with the XRD and SEM results, sulfur was not detected in the bulk of either ternary alloy samples by EDS, even after 30 hours of H{sub 2}S exposure. X-ray photoelectron spectroscopy (XPS) depth profiles were acquired for both PdAgAu alloys after 3 and 30 hours of exposure to characterize sulfur contamination near their surfaces. Very low S 2p and S 2s XPS signals were observed at the top-surfaces of the PdAgAu alloys, and those signals disappeared before the etch depth reached ~ 10 nm, even for samples exposed to H{sub 2}S for 30 hours. The depth profile analyses also revealed silver and gold segregation to the surface of the alloys; preferential location of Au on the alloys surface may be related to their resistance to bulk sulfide formation. In preliminary tests, a PdAgAu alloy membrane displayed higher initial H{sub 2} permeability than a similarly prepared pure Pd sample and, consistent with resistance to bulk sulfide formation, lower permeability loss in H{sub 2}S than pure Pd.

  11. Feds Feed Families Wraps Up Successful Campaign to Stock Area Food Banks

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – The fourth annual Feds Feed Families, an effort by DOE and other federal agencies to stock area food banks, has entered the homestretch of its campaign that ends this month.

  12. World Bank eAtlas of Global Development | Open Energy Information

    Open Energy Info (EERE)

    World Bank eAtlas of Global Development1 "This eAtlas, a new online companion to Atlas of Global Development, third edition, builds on the Atlas topics, allowing you to...

  13. World Bank-MENA Regional-NAMAs and Corresponding Climate Finance...

    Open Energy Info (EERE)

    analysis, Background analysis Website http:www.worldbank.org UN Region Northern Africa, Western Asia References World Bank1 This article is a stub. You can help OpenEI...

  14. World Bank-Morocco Study on the Impact of Climate Change on the...

    Open Energy Info (EERE)

    Morocco Study on the Impact of Climate Change on the Agricultural Sector Jump to: navigation, search Name World Bank-Morocco Study on the Impact of Climate Change on the...

  15. EM Employees at West Valley Help Beat Goal for Food Banks

    Broader source: Energy.gov [DOE]

    WEST VALLEY, N.Y. – EM employees and their contractor counterparts at the West Valley Demonstration Project (WVDP) have supported their local food banks for several years, and this year was no exception.

  16. Tube bank metal wastage in the Grimethorpe PFBC. [Pressurized fluidized bed combustor

    SciTech Connect (OSTI)

    Not Available

    1984-02-01

    During hot commissioning tests of the Grimethorpe PFBC plant, a significant degree of metal wastage was observed on the fireside surfaces of the tube bank. The investigation of this wastage is described and the remedial measures taken are discussed.

  17. The Asian Development Bank`s role in promoting cleaner production in the People`s Republic of China

    SciTech Connect (OSTI)

    Huq, A.; Lohani, B.N.; Jalal, K.F.; Ouano, E.A.R.

    1999-09-01

    The People`s Republic of China (PRC) has the fastest growing economy in the world and is the third largest producer and consumer of energy. At the same time, the PRC`s industrial sector contributes heavily to air and water pollution. Because of the linkages between the production and use of energy and environmental degradation, the PRC, with the active support of bilateral and multilateral aid agencies, including the Asian Development Bank (ADB), is adopting measures that link economic growth to improvements in the environment. The PRC is pursuing a two-pronged strategy that involves implementing priority investment programs and promoting economic reforms. The ADB`s experience shows that the concept of cleaner production (CP) has been widely accepted, but the widespread adoption of CP requires a new way of thinking and new management capacities. In this regard, the PRC is at an early stage of promoting CP, and inadequacies in coordination among relevant agencies remain a key obstacle. To support CP activities, the ADB is participating in a cluster of activities within China that include policy development, capacity building, and financing environmental investments. This article describes the ADB`s current efforts to promote CP in PRC and analyzes the effectiveness of those efforts.

  18. Partial gamma-ray cross section measurements in 109Ag(n, x n y p gamma)

    Office of Scientific and Technical Information (OSTI)

    reactions (Technical Report) | SciTech Connect Technical Report: Partial gamma-ray cross section measurements in 109Ag(n, x n y p gamma) reactions Citation Details In-Document Search Title: Partial gamma-ray cross section measurements in 109Ag(n, x n y p gamma) reactions We report on absolute partial cross sections for production of discrete γ-rays using 109Ag(n, xnypγ) reactions with x ≤ 7 and y ≤ 1 in a total of 12 reaction channels. The data were taken using the GEANIE spectrometer

  19. Si/ZnO nanorods/Ag/AZO structures as promising photovoltaic plasmonic cells

    SciTech Connect (OSTI)

    Placzek-Popko, E. Gwozdz, K.; Gumienny, Z.; Zielony, E.; Jacak, W.; Pietruszka, R.; Witkowski, B. S.; Wachnicki, ?.; Gieraltowska, S.; Chang, Liann-Be

    2015-05-21

    The test structures for photovoltaic (PV) applications based on zinc oxide nanorods (NRs) that were grown using a low-temperature hydrothermal method on p-type silicon substrates (100) covered with Ag nanoparticles (NPs) were studied. The NPs of three different diameters, i.e., 510?nm, 20-30?nm, and 5060?nm, were deposited using a sputtering method. The morphology and crystallinity of the structures were confirmed by scanning electron microscopy and Raman spectroscopy. It was found that the nanorods have a hexagonal wurtzite structure. An analysis of the Raman and photoluminescence spectra permitted the identification of the surface modes at 476?cm{sup ?1} and 561?cm{sup ?1}. The presence of these modes is evidence of nanorods oriented along the wurtzite c-axis. The NRs with Ag NPs were covered with a ZnO:Al (AZO) layer that was grown using the low-temperature atomic layer deposition technique. The AZO layer served as a transparent ohmic contact to the ZnO nanorods. The applicability of the AZO layer for this purpose and the influence of the Ag nanoparticles on the effectiveness of light acquisition by such prepared PV cells were checked by reflectance and transmittance measurements of the AZO/glass and AZO/NPs/glass reference structures. Based on these studies, the high-energy transmittance edge was assigned to the ZnO energy gap, although it is blueshifted with respect to the bulk ZnO energy gap because of Al doping. It was also shown that the most optimal PV performance is obtained from a structure containing Ag nanoparticles with a diameter of 2030?nm. This result is confirmed by the current-voltage measurements performed with 1-sun illumination. The structures show a plasmonic effect within the short wavelength range: the PV response for the structure with Ag nanoparticles is twice that of the structure without the nanoparticles. However, the influence of the Ag nanoparticle diameters on the plasmonic effect is ambiguous.

  20. Natural nanostructure and superlattice nanodomains in AgSbTe{sub 2}

    SciTech Connect (OSTI)

    Carlton, Christopher E.; De Armas, Ricardo; Shao-Horn, Yang E-mail: shaohorn@mit.edu; Ma, Jie; May, Andrew F.; Delaire, Olivier E-mail: shaohorn@mit.edu

    2014-04-14

    AgSbTe{sub 2} has long been of interest for thermoelectric applications because of its favorable electronic properties and its low lattice thermal conductivity of ?0.7?W/mK. In this work, we report new findings from a high-resolution transmission electron microscopy study revealing two nanostructures in single crystal Ag{sub 1?x}Sb{sub 1+x}Sb{sub 2+x} (with x?=?0, 0.1, 0.2); (i) a rippled natural nanostructure with a period of ?2.55?nm and (ii) superlattice ordered nanodomains consistent with cation ordering predicted in previous density functional theory studies. These nanostructures, combined with point-defects, probably serve as sources of scattering for phonons, thereby yielding a low lattice thermal conductivity over a wide temperature range.

  1. Role of thermal processes in dewetting of epitaxial Ag(111) film on Si(111)

    SciTech Connect (OSTI)

    Sanders, Charlotte E.; Zhang, Chendong D.; Kellogg, Gary L.; Shih, Chih-Kang

    2014-08-01

    Epitaxially grown silver (Ag) film on silicon (Si) is an optimal plasmonic device platform, but its technological utility has been limited by its tendency to dewet rapidly under ambient conditions (standard temperature and pressure). The mechanisms driving this dewetting have not heretofore been determined. In our study, scanning probe microscopy and low-energy electron microscopy are used to compare the morphological evolution of epitaxial Ag(111)/Si(111) under ambient conditions with that of similarly prepared films heated under ultra-high vacuum (UHV) conditions. Furthermore, dewetting is seen to be initiated with the formation of pinholes, which might function to relieve strain in the film. We find that in the UHV environment, dewetting is determined by thermal processes, and while under ambient conditions, thermal processes are not required. Finally, we conclude that dewetting in ambient conditions is triggered by some chemical process, most likely oxidation.

  2. Role of thermal processes in dewetting of epitaxial Ag(111) film on Si(111)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sanders, Charlotte E.; Zhang, Chendong D.; Kellogg, Gary L.; Shih, Chih-Kang

    2014-08-01

    Epitaxially grown silver (Ag) film on silicon (Si) is an optimal plasmonic device platform, but its technological utility has been limited by its tendency to dewet rapidly under ambient conditions (standard temperature and pressure). The mechanisms driving this dewetting have not heretofore been determined. In our study, scanning probe microscopy and low-energy electron microscopy are used to compare the morphological evolution of epitaxial Ag(111)/Si(111) under ambient conditions with that of similarly prepared films heated under ultra-high vacuum (UHV) conditions. Furthermore, dewetting is seen to be initiated with the formation of pinholes, which might function to relieve strain in the film.more » We find that in the UHV environment, dewetting is determined by thermal processes, and while under ambient conditions, thermal processes are not required. Finally, we conclude that dewetting in ambient conditions is triggered by some chemical process, most likely oxidation.« less

  3. Xe/Kr Selectivity Measurements using AgZ-PAN at Various Temperatures

    SciTech Connect (OSTI)

    Garn, Troy Gerry; Greenhalgh, Mitchell Randy; Watson, Tony Leroy

    2015-05-01

    In preparation for planned FY-15 Xe/Kr multi-column testing, a series of experiments were performed to determine the selectivity of Xe over Kr using the silver converted mordenite-polyacrylonitrile (AgZ-PAN) sorbent. Results from these experiments will be used for parameter selection guidelines to define test conditions for Kr gas capture purity evaluations later this year. The currently configured experimental test bed was modified by installing a new cooling apparatus to permit future multi-column testing with independent column temperature control. The modified test bed will allow for multi-column testing to facilitate a Xe separation followed by a Kr separation using engineered form sorbents. Selectivity experiments were run at temperatures of 295, 250 and 220 K. Two feed gas compositions of 1000 ppmv Xe, 150 ppmv Kr in either a He or an air balance were used. AgZ-PAN sorbent selectivity was calculated using Xe and Kr capacity determinations. AgZ-PAN sorbent selectivities for Xe over Kr of 72 were calculated at room temperature (295 K) using the feed gas with a He balance and 34 using the feed gas with an air balance. As the test temperatures were decreased the selectivity of Xe over Kr also decreased due to an increase in both Xe and Kr capacities. At 220 K, the sorbent selectivities for Xe over Kr were 22 using the feed gas with a He balance and 28 using the feed gas with an air balance. The selectivity results indicate that AgZ-PAN used in the first column of a multi-column configuration will provide adequate partitioning of Xe from Kr in the tested temperature range to produce a more pure Kr end product for collection.

  4. Size and alloying induced shift in core and valence bands of Pd-Ag and Pd-Cu nanoparticles

    SciTech Connect (OSTI)

    Sengar, Saurabh K.; Mehta, B. R.; Govind

    2014-03-28

    In this report, X-ray photoelectron spectroscopy studies have been carried out on Pd, Ag, Cu, Pd-Ag, and Pd-Cu nanoparticles having identical sizes corresponding to mobility equivalent diameters of 60, 40, and 20 nm. The nanoparticles were prepared by the gas phase synthesis method. The effect of size on valence and core levels in metal and alloy nanoparticles has been studied by comparing the values to those with the 60 nm nanoparticles. The effect of alloying has been investigated by comparing the valence and core level binding energies of Pd-Cu and Pd-Ag alloy nanoparticles with the corresponding values for Pd, Ag, and Cu nanoparticles of identical sizes. These effects have been explained in terms of size induced lattice contractions, alloying induced charge transfer, and hybridization effects. The observation of alloying and size induced binding energy shifts in bimetallic nanoparticles is important from the point of view of hydrogen reactivity.

  5. Spectroscopic evidence for Ag(III) in highly oxidized silver films by x-ray photoelectron spectroscopy

    SciTech Connect (OSTI)

    Kaspar, Tiffany C.; Droubay, Timothy C.; Chambers, Scott A.; Bagus, Paul S.

    2010-12-16

    In situ x-ray photoelectron spectroscopy (XPS) was utilized to identify the chemical state of silver in a range of silver oxide thin films obtained by co-deposition of silver and atomic oxygen. A highly oxidized silver species was observed at an unexpectedly low Ag 3d5/2 binding energy (BE) of 366.8 eV with an associated broad satellite at 368.2 eV; this species was assigned as Ag(III). It was found to be highly unstable in vacuum, but could be regenerated by further exposure to atomic oxygen. Both BE shifts and intensity changes of the O 1s peak were found to correlate with changes in the silver oxidation state. Theoretical calculations of the expected XPS of high spin Ag(III) provide insight into the significance of satellite structure and shake features in the Ag 3d spectra.

  6. Underpotential deposition of Ag adlayers on Pt(111): Structures and determination of O{sub 2} adsorption on Pt(111)

    SciTech Connect (OSTI)

    Marinkovic, N.S.; Wang, J.X.; Adzic, R.R.

    1997-09-01

    The structure of Ag adlayers deposited at underpotentials in sulfuric acid on Pt(111), and the inhibition of O{sub 2} reduction they cause, have been studied using grazing incident angle x-ray diffraction measurements, as well as linear sweep voltammetry and in situ FTIR spectroscopy. Ag forms a hexagonal incommensurate bilayer, with two mutually commensurate monolayers. It is aligned with the Pt(111) substrate, although slightly expanded. The first monolayer has a commensurate (1 x 1) structure. A second layer causes a restructuring of the first monolayer. Deposition of each monolayer is associated with one voltammetry Peak. A complete inhibition of O{sub 2} reduction on Pt(111) has been observed upon deposition of both, Ag monolayer and bilayer. Analysis of the inhibition of O{sub 2} reduction as a function of the Ag coverage shows that during reduction O{sub 2} adsorbs in a bridge configuration on Pt(111).

  7. The valence band structure of Ag{sub x}Rh{sub 1–x} alloy nanoparticles

    SciTech Connect (OSTI)

    Yang, Anli; Sakata, Osami; Kusada, Kohei; Kobayashi, Hirokazu; Yayama, Tomoe; Ishimoto, Takayoshi; Yoshikawa, Hideki; Koyama, Michihisa; and others

    2014-10-13

    The valence band (VB) structures of face-centered-cubic Ag-Rh alloy nanoparticles (NPs), which are known to have excellent hydrogen-storage properties, were investigated using bulk-sensitive hard x-ray photoelectron spectroscopy. The observed VB spectra profiles of the Ag-Rh alloy NPs do not resemble simple linear combinations of the VB spectra of Ag and Rh NPs. The observed VB hybridization was qualitatively reproduced via a first-principles calculation. The electronic structure of the Ag{sub 0.5}Rh{sub 0.5} alloy NPs near the Fermi edge was strikingly similar to that of Pd NPs, whose superior hydrogen-storage properties are well known.

  8. Effect of temperature on the nano/microstructure and mechanical behavior of nanotwinned Ag films

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Huan; Geng, Jie; Ott, Ryan T.; Besser, Matthew F.; Kramer, Matthew J.

    2015-06-24

    In situ and ex situ annealed nanotwinned (NT) Ag thin films have been investigated by TEM and tensile testing to reveal the thermal stability of the twin boundaries, grain boundaries, dislocation densities, and their respective influence of the macroscopic yield stress. The NT Ag films synthesized by magnetron sputtering form both coherent (CTB, Σ3{111}) and incoherent (ITB, Σ3{112}) twin boundaries that are thermally stable up to 473 K (200 Celsius), i.e., no obvious changes in grain size, twin spacing, and yield stress. In situ TEM observations show the dislocations become mobile at 453 K (180 Celsius) resulting in dislocation annihilationmore » primarily at twin and grain boundaries. Rotation of grains with low-angle grain boundaries was observed during in situ heating, resulting in the growth of columnar grains above 453 K (180 Celsius). However, no noticeable changes in the spacings of CTBs were observed during the entire in situ and ex situ annealing [up to 873 K (600 Celsius)]. The increase in grain size and concomitant decrease in yield stress following annealing at various temperatures can be described by the Hall-Petch relationship, demonstrating that grain size rather than twin spacing is most sensitive to thermal annealing and plays a dominant role in the deformation of NT Ag films.« less

  9. Silver (Ag) Transport Mechanisms in TRISO Coated Particles: A Critical Review

    SciTech Connect (OSTI)

    IJ van Rooyen; ML Dunzik-Gougar; PM van Rooyen

    2014-05-01

    Transport of 110mAg in the intact SiC layer of TRISO coated particles has been studied for approximately 30 years without arriving at a satisfactory explanation of the transport mechanism. In this paper the possible mechanisms postulated in previous experimental studies, both in-reactor and out-of reactor research environment studies are critically reviewed and of particular interest are relevance to very high temperature gas reactor operating and accident conditions. Among the factors thought to influence Ag transport are grain boundary stoichiometry, SiC grain size and shape, the presence of free silicon, nano-cracks, thermal decomposition, palladium attack, transmutation products, layer thinning and coated particle shape. Additionally new insight to nature and location of fission products has been gained via recent post irradiation electron microscopy examination of TRISO coated particles from the DOE’s fuel development program. The combined effect of critical review and new analyses indicates a direction for investigating possible the Ag transport mechanism including the confidence level with which these mechanisms may be experimentally verified.

  10. Effect of temperature on the nano/microstructure and mechanical behavior of nanotwinned Ag films

    SciTech Connect (OSTI)

    Zhang, Huan; Geng, Jie; Ott, Ryan T.; Besser, Matthew F.; Kramer, Matthew J.

    2015-06-24

    In situ and ex situ annealed nanotwinned (NT) Ag thin films have been investigated by TEM and tensile testing to reveal the thermal stability of the twin boundaries, grain boundaries, dislocation densities, and their respective influence of the macroscopic yield stress. The NT Ag films synthesized by magnetron sputtering form both coherent (CTB, ?3{111}) and incoherent (ITB, ?3{112}) twin boundaries that are thermally stable up to 473 K (200 Celsius), i.e., no obvious changes in grain size, twin spacing, and yield stress. In situ TEM observations show the dislocations become mobile at 453 K (180 Celsius) resulting in dislocation annihilation primarily at twin and grain boundaries. Rotation of grains with low-angle grain boundaries was observed during in situ heating, resulting in the growth of columnar grains above 453 K (180 Celsius). However, no noticeable changes in the spacings of CTBs were observed during the entire in situ and ex situ annealing [up to 873 K (600 Celsius)]. The increase in grain size and concomitant decrease in yield stress following annealing at various temperatures can be described by the Hall-Petch relationship, demonstrating that grain size rather than twin spacing is most sensitive to thermal annealing and plays a dominant role in the deformation of NT Ag films.

  11. First-principles insights into interaction of CO, NO, and HCN with Ag{sub 8}

    SciTech Connect (OSTI)

    Torbatian, Zahra; Hashemifar, S. Javad, E-mail: hashemifar@cc.iut.ac.ir; Akbarzadeh, Hadi [Department of Physics, Isfahan University of Technology, 84156-83111 Isfahan (Iran, Islamic Republic of)] [Department of Physics, Isfahan University of Technology, 84156-83111 Isfahan (Iran, Islamic Republic of)

    2014-02-28

    We use static as well as time-dependent first-principles computations to study interaction of the CO, NO, and HCN molecules with the Ag{sub 8} nanocluster. The many-body based GW correction is applied for accurate description of the highest occupied (HOMO) and the lowest unoccupied (LUMO) molecular orbital levels. It is argued that the adsorption of these molecules changes the stable structure of Ag{sub 8} from Td to the more chemically active D{sub 2d} symmetry. We discuss that the CO, NO, and HCN molecules prefer to adsorb on the atom of the cluster with significant contribution to both HOMO and LUMO, for the accomplishment of the required charge transfers in the systems. The charge back donation is found to leave an excess energy of about 110 meV on the NO molecular bond, evidencing potential application of silver clusters for NO reduction. It is argued that CO and specially NO exhibit strong physical interaction with the silver cluster and hence significantly modify the electronic and optical properties of the system, while HCN makes very week physical bonds with the cluster. The optical absorption spectra of the Ag{sub 8} cluster before and after molecule adsorption are computed and a nontrivial red shift is observed in the NO and HCN adsorbed clusters.

  12. Silver (Ag) Transport Mechanisms in TRISO coated particles: A Critical Review

    SciTech Connect (OSTI)

    I J van Rooyen; J H Neethling; J A A Engelbrecht; P M van Rooyen; G Strydom

    2012-10-01

    Transport of 110mAg in the intact SiC layer of TRISO coated particles has been studied for approximately 30 years without arriving at a satisfactory explanation of the transport mechanism. In this paper the possible mechanisms postulated in previous experimental studies, both in-reactor and out-of reactor research environment studies are critically reviewed and of particular interest are relevance to very high temperature gas reactor operating and accident conditions. Among the factors thought to influence Ag transport are grain boundary stoichiometry, SiC grain size and shape, the presence of free silicon, nano-cracks, thermal decomposition, palladium attack, transmutation products, layer thinning and coated particle shape. Additionally new insight to nature and location of fission products has been gained via recent post irradiation electron microscopy examination of TRISO coated particles from the DOEs fuel development program. The combined effect of critical review and new analyses indicates a direction for investigating possible the Ag transport mechanism including the confidence level with which these mechanisms may be experimentally verified.

  13. Evidence for graphite-like hexagonal AlN nanosheets epitaxially grown on single crystal Ag(111)

    SciTech Connect (OSTI)

    Tsipas, P.; Kassavetis, S.; Tsoutsou, D.; Xenogiannopoulou, E.; Golias, E.; Giamini, S. A.; Dimoulas, A.; Grazianetti, C.; Fanciulli, M.; Dipartimento di Scienza dei Materiali, Universit degli Studi di Milano Bicocca, I-20126, Milano ; Chiappe, D.; Molle, A.

    2013-12-16

    Ultrathin (sub-monolayer to 12 monolayers) AlN nanosheets are grown epitaxially by plasma assisted molecular beam epitaxy on Ag(111) single crystals. Electron diffraction and scanning tunneling microscopy provide evidence that AlN on Ag adopts a graphite-like hexagonal structure with a larger lattice constant compared to bulk-like wurtzite AlN. This claim is further supported by ultraviolet photoelectron spectroscopy indicating a reduced energy bandgap as expected for hexagonal AlN.

  14. Demonstrate Scale-up Procedure for Glass Composite Material (GCM) for Incorporation of Iodine Loaded AgZ.

    SciTech Connect (OSTI)

    Nenoff, Tina M.; Garino, Terry J.; Croes, Kenneth James; Rodriguez, Mark A.

    2015-07-01

    Two large size Glass Composite Material (GCM) waste forms containing AgI-MOR were fabricated. One contained methyl iodide-loaded AgI-MOR that was received from Idaho National Laboratory (INL, Test 5, Beds 1 – 3) and the other contained iodine vapor loaded AgIMOR that was received from Oak Ridge National Laboratory (ORNL, SHB 2/9/15 ). The composition for each GCM was 20 wt% AgI-MOR and 80 wt% Ferro EG2922 low sintering temperature glass along with enough added silver flake to prevent any I2 loss during the firing process. The silver flake amounts were 1.2 wt% for the GCM with the INL AgI-MOR and 3 wt% for the GCM contained the ORNL AgI-MOR. The GCMs, nominally 100 g, were first uniaxially pressed to 6.35 cm (2.5 inch) diameter disks then cold isostatically pressed, before firing in air to 550°C for 1hr. They were cooled slowly (1°C/min) from the firing temperature to avoid any cracking due to temperature gradients. The final GCMs were ~5 cm in diameter (~2 inches) and non-porous with densities of ~4.2 g/cm³. X-ray diffraction indicated that they consisted of the amorphous glass phase with small amounts of mordenite and AgI. Furthermore, the presence of the AgI was confirmed by X-ray fluorescence. Methodology for the scaled up production of GCMs to 6 inch diameter or larger is also presented.

  15. Structural and optical properties of (Ag,Cu)(In,Ga)Se{sub 2} polycrystalline thin film alloys

    SciTech Connect (OSTI)

    Boyle, J. H.; Shafarman, W. N.; Birkmire, R. W.; McCandless, B. E.

    2014-06-14

    The structural and optical properties of pentenary alloy (Ag,Cu)(In,Ga)Se{sub 2} polycrystalline thin films were characterized over the entire compositional range at a fixed (Cu + Ag)/(In + Ga) ratio. Films deposited at 550 °C on bare and molybdenum coated soda-lime glass by elemental co-evaporation in a single-stage process with constant incident fluxes exhibit single phase chalcopyrite structure, corresponding to 122 spacegroup (I-42d) over the entire compositional space. Unit cell refinement of the diffraction patterns show that increasing Ag substitution for Cu, the refined a{sub o} lattice constant, (Ag,Cu)-Se bond length, and anion displacement increase in accordance with the theoretical model proposed by Jaffe, Wei, and Zunger. However, the refined c{sub o} lattice constant and (In,Ga)-Se bond length deviated from theoretical expectations for films with mid-range Ag and Ga compositions and are attributed to influences from crystallographic bond chain ordering or cation electronegativity. The optical band gap, derived from transmission and reflection measurements, widened with increasing Ag and Ga content, due to influences from anion displacement and cation electronegativity, as expected from theoretical considerations for pseudo-binary chalcopyrite compounds.

  16. Ag Out-surface Diffusion In Crystalline SiC With An Effective SiO2 Diffusion Barrier

    SciTech Connect (OSTI)

    Xue, H.; Xiao, Haiyan Y.; Zhu, Zihua; Shutthanandan, V.; Snead, Lance L.; Boatner, Lynn A.; Weber, William J.; Zhang, Y.

    2015-09-01

    For applications of tristructural isotropic (TRISO) fuel particles in high temperature reactors, release of radioactive Ag isotope (110mAg) through the SiC coating layer is a safety concern. To understand the diffusion mechanism, Ag ion implantations near the surface and in the bulk were performed by utilizing different ion energies and energy-degrader foils. High temperature annealing was carried out on the as-irradiated samples to study the possible out-surface diffusion. Before and after annealing, Rutherford backscattering spectrometry (RBS) and secondary ion mass spectrometry (SIMS) measurements were employed to obtain the elemental profiles of the implanted samples. The results suggest little migration of buried Ag in the bulk, and an out-diffusion of the implanted Ag in the near-surface region of single crystal SiC. It is also found that a SiO2 layer, which was formed during annealing, may serve as an effective barrier to reduce or prevent Ag out diffusion through the SiC coating layer.

  17. Ag(I) Ion Functionalized Porous Organic Polymers As a New Platform for Highly Selective Adsorption of Ethylene over Ethane

    SciTech Connect (OSTI)

    LI, Baiyan; Zhang, Yiming; Ma, Dingxuan; Wu, Zili; Ma, Shengqian

    2014-01-01

    We report herein a strategy of incorporating air stable Ag(I) ions into water stable, high surface area porous organic polymer (POP) affording significant increase in ethylene uptake capacity and extremely high Qst for ethylene (over 100 kJ/mol at low ethylene load-ing) as illustrated in the context of Ag(I) ion functionalized PAF-1, PAF-1-SO3Ag. IAST calculations using single-component-isotherm data and equimolar ethylene/ethane ratio at 296 K reveal PAF-1-SO3Ag shows exceptionally high ethylene/ethane adsorption selectivi-ty (Sads: 27 to 125), far surpassing benchmark zeolite and any other MOF reported in literature. This alongside excellent water/air stability, high ethylene uptake capacity, and mild regeneration requirements make PAF-1-SO3Ag hold promise for adsorption-based eth-ylene/ethane separations, paving a way to develop Ag(I) ion function-alized POPs as a new platform for highly selective adsorption of eth-ylene over ethane.

  18. AGS SUPER NEUTRINO BEAM FACILITY ACCELERATOR AND TARGET SYSTEM DESIGN (NEUTRINO WORKING GROUP REPORT-II).

    SciTech Connect (OSTI)

    DIWAN,M.; MARCIANO,W.; WENG,W.; RAPARIA,D.

    2003-04-21

    This document describes the design of the accelerator and target systems for the AGS Super Neutrino Beam Facility. Under the direction of the Associate Laboratory Director Tom Kirk, BNL has established a Neutrino Working Group to explore the scientific case and facility requirements for a very long baseline neutrino experiment. Results of a study of the physics merit and detector performance was published in BNL-69395 in October 2002, where it was shown that a wide-band neutrino beam generated by a 1 MW proton beam from the AGS, coupled with a half megaton water Cerenkov detector located deep underground in the former Homestake mine in South Dakota would be able to measure the complete set of neutrino oscillation parameters: (1) precise determination of the oscillation parameters {Delta}m{sub 32}{sup 2} and sin{sup 2} 2{theta}{sub 32}; (2) detection of the oscillation of {nu}{sub {mu}}-{nu}{sub e} and measurement of sin{sup 2} 2{theta}{sub 13}; (3) measurement of {Delta}m{sub 21}{sup 2} sin 2{theta}{sub 12} in a {nu}{sub {mu}} {yields} {nu}{sub e} appearance mode, independent of the value of {theta}{sub 13}; (4) verification of matter enhancement and the sign of {Delta}m{sub 32}{sup 2}; and (5) determination of the CP-violation parameter {delta}{sub CP} in the neutrino sector. This report details the performance requirements and conceptual design of the accelerator and the target systems for the production of a neutrino beam by a 1.0 MW proton beam from the AGS. The major components of this facility include a new 1.2 GeV superconducting linac, ramping the AGS at 2.5 Hz, and the new target station for 1.0 MW beam. It also calls for moderate increase, about 30%, of the AGS intensity per pulse. Special care is taken to account for all sources of proton beam loss plus shielding and collimation of stray beam halo particles to ensure equipment reliability and personal safety. A preliminary cost estimate and schedule for the accelerator upgrade and target system are also included.

  19. EIA - Energy Conferences & Presentations.

    U.S. Energy Information Administration (EIA) Indexed Site

    5 EIA Conference 2010 Session 5: Energy and the Economy Moderator: Adam Sieminski, Deutsche Bank Speakers: Stephen P. A. Brown, Resources for the Future Donald L. Paul, University of Southern California Energy Institute Moderator and Speaker Biographies Adam Sieminski is the Chief Energy Economist for Deutsche Bank, working with the Bank's global commodities research and trading units. Drawing on extensive industry, government and academic sources, Mr. Sieminski forecasts energy market trends

  20. Implementing an X-ray validation pipeline for the Protein Data Bank

    SciTech Connect (OSTI)

    Gore, Swanand; Velankar, Sameer; Kleywegt, Gerard J.

    2012-04-01

    The implementation of a validation pipeline, based on community recommendations, for future depositions of X-ray crystal structures in the Protein Data Bank is described. There is an increasing realisation that the quality of the biomacromolecular structures deposited in the Protein Data Bank (PDB) archive needs to be assessed critically using established and powerful validation methods. The Worldwide Protein Data Bank (wwPDB) organization has convened several Validation Task Forces (VTFs) to advise on the methods and standards that should be used to validate all of the entries already in the PDB as well as all structures that will be deposited in the future. The recommendations of the X-ray VTF are currently being implemented in a software pipeline. Here, ongoing work on this pipeline is briefly described as well as ways in which validation-related information could be presented to users of structural data.

  1. A cost effective battery bank for I sup 2 t testing and evaluation of electrical switchgear

    SciTech Connect (OSTI)

    Reass, W.A.

    1989-01-01

    This paper describes the electrical design and mechanical construction of a 50 kA step switched'' battery bank. Individual fuses protect each of the forty parallel isolated strings of three series (12 V) batteries. Step current waveforms of 12.5 kA, 25 kA, 37.5 kA, and 50 kA are produced by 8 sets of pneumatically driven 20 pole step switches and current limiting stainless steel trombone'' resistors. Inexpensive, yet conservatively designed, Group 65 Motorcraft car batteries are used to give an I{sup 2}t capability of better than 5 {times} 10{sup 9}. The battery bank has well over 1500 shots, with testing of commercial switchgear continuing. In addition to the battery bank engineering data, results of repetitive testing of vacuum interrupters at their I{sup 2}t limit will be provided. 8 figs.

  2. Energy Secretary Moniz, EPA Administrator McCarthy and World Bank President

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kim to Keynote ARPA-E Energy Innovation Summit | Department of Energy Moniz, EPA Administrator McCarthy and World Bank President Kim to Keynote ARPA-E Energy Innovation Summit Energy Secretary Moniz, EPA Administrator McCarthy and World Bank President Kim to Keynote ARPA-E Energy Innovation Summit December 9, 2015 - 2:05pm Addthis News Media Contact (202) 586-0976 DOENews@hq.doe.gov WASHINGTON - The U.S. Department of Energy today announced that U.S. Energy Secretary Ernest Moniz, U.S.

  3. New chalcogenide glasses in the CdTe-AgI-As{sub 2}Te{sub 3} system

    SciTech Connect (OSTI)

    Kassem, M.; Le Coq, D.; Boidin, R.; Bychkov, E.; ULCO, LPCA, EA 4493, F-59140 Dunkerque

    2012-02-15

    Highlights: Black-Right-Pointing-Pointer Determination of the glass-forming region in the pseudo-ternary CdTe-AgI-As{sub 2}Te{sub 3} system. Black-Right-Pointing-Pointer Characterization of macroscopic properties of the new CdTe-AgI-As{sub 2}Te{sub 3} glasses. Black-Right-Pointing-Pointer Characterization of the total conductivity of CdTe-AgI-As{sub 2}Te{sub 3} glasses. Black-Right-Pointing-Pointer Comparison between the selenide and telluride equivalent systems. -- Abstract: Chalcogenide glasses in the pseudo-ternary CdTe-AgI-As{sub 2}Te{sub 3} system were synthesized and the glass-forming range was determined. The maximum content of CdTe in this glass system was found to be equal to 15 mol.%. The macroscopic characterizations of samples have consisted in Differential Scanning Calorimetry, density, and X-ray diffraction measurements. The cadmium telluride addition does not generate any significant change in the glass transition temperature but the resistance of binary AgI-As{sub 2}Te{sub 3} glasses towards crystallisation is estimated to be decreasing on the base of {Delta}T = T{sub x} - T{sub g} parameter. The total electrical conductivity {sigma} was measured by complex impedance spectroscopy. First, the CdTe additions in the (AgI){sub 0.5}(As{sub 2}Te{sub 3}){sub 0.5} host glass, (CdTe){sub x}(AgI){sub 0.5-x/2}(As{sub 2}Te{sub 3}){sub 0.5-x/2} lead to a conductivity decrease at x {<=} 0.05. Then, the behaviour is reversed at 0.05 {<=} x {<=} 0.15. The obtained results are discussed by comparison with the equivalent selenide system.

  4. Enhanced photoresponse of conformal TiO{sub 2}/Ag nanorod array-based Schottky photodiodes fabricated via successive glancing angle and atomic layer deposition

    SciTech Connect (OSTI)

    Haider, Ali; Biyikli, Necmi; Cansizoglu, Hilal; Cansizoglu, Mehmet Fatih; Karabacak, Tansel; Okyay, Ali Kemal

    2015-01-01

    In this study, the authors demonstrate a proof of concept nanostructured photodiode fabrication method via successive glancing angle deposition (GLAD) and atomic layer deposition (ALD). The fabricated metal-semiconductor nanorod (NR) arrays offer enhanced photoresponse compared to conventional planar thin-film counterparts. Silver (Ag) metallic NR arrays were deposited on Ag-film/Si templates by utilizing GLAD. Subsequently, titanium dioxide (TiO{sub 2}) was deposited conformally on Ag NRs via ALD. Scanning electron microscopy studies confirmed the successful formation of vertically aligned Ag NRs deposited via GLAD and conformal deposition of TiO{sub 2} on Ag NRs via ALD. Following the growth of TiO{sub 2} on Ag NRs, aluminum metallic top contacts were formed to complete the fabrication of NR-based Schottky photodiodes. Nanostructured devices exhibited a photo response enhancement factor of 1.49??10{sup 2} under a reverse bias of 3 V.

  5. COMMISSIONING RESULTS OF SLOW EXTRACTION OF HEAVY IONS FROM THE AGS BOOSTER.

    SciTech Connect (OSTI)

    Brown, K A; Bellavia, S; Binello, S; Brelsford, B; Dumont, D; Eng, W; Gardner, G; Gassner, D; Glenn, J W; Hammons, L; Hock, J; Hoff, L; Hutchinson, E; Jamilkowski, J; Kling, N; Kotlyar, Y; Krishock, A; Lockey, R; Mapes, M; Marneris, I; Marr, G; McNerney, A; Meyer, A; Morris, J; Naylor, C; Nemesure, S; Phillips, D; Rusek, A; Ryan, J; Shrey, T; Snydstrup, L; Tsoupas, N; Vankuik, B; Zahariou-Cohen, K

    2003-05-12

    Brookhaven's AGS Booster has been modified to deliver slow extracted beam to a new beam line, the NASA Space Radiation Laboratory (NSRL). This facility was constructed in collaboration with NASA for the purpose of performing radiation effect studies for the NASA space program. The design of the resonant extraction system has been described in [1]. A more detailed description, which includes predictions of the slow extracted beam time structure has been described in [2]. In this report we will present results of the system commissioning and performance.

  6. Pressure distribution along the AGS vacuum chambers with new types of pump out conduits

    SciTech Connect (OSTI)

    Nayak, S.; Mapes, M.; Smart, L.; Weiss, D.

    2015-10-28

    The AGS HEBT and ring vacuum system is monitored by the discharge current of the magnet ion pumps, which is proportional to the pressure at the inlet port of these ion pumps. The discharge current is measured and suitably calibrated to indicate the ion pump pressure. In order to calculate the vacuum chamber pressure from the ion pump pressure, a detailed analysis is essential to compute their difference in different scenarios. Such analysis has been carried out numerically in the past for the system with the older type of pump out conduits, and similar analysis using FEM in ANSYS is presented in this paper with the newer type of pump out conduit.

  7. OVERVIEW OF THE AGS COLD SNAKE POWER SUPPLIES AND THE NEW RHIC SEXTUPOLE POWER SUPPLIES

    SciTech Connect (OSTI)

    BRUNO,D.; GANETIS, G.; SANDBERG, J.; LOUIE, W.

    2007-06-25

    The two rings in the Relativistic Heavy Ion Collider (RHIC) were originally constructed with 24 sextupole power supplies, 12 for each ring. Before the start of Run 7, 24 new sextupole power supplies were installed, 12 for each ring. Individual sextupole power supplies are now each connected to six sextupole magnets. A superconducting snake magnet and power supplies were installed in the Alternating Gradient Synchrotron (AGS) and commissioned during RHIC Run 5, and used operationally in RHIC Run 6. The power supply technology, connections, control systems and interfacing with the Quench Protection system for both these systems will be presented.

  8. Extractive industries and sustainable development: an evaluation of World Bank Group experience

    SciTech Connect (OSTI)

    Andres Liebenthal; Roland Michelitsch; Ethel Tarazona

    2005-07-01

    How effectively has the World Bank Group assisted its clients in enhancing the contribution of the extractive industries to sustainable development? (Extractive industries include oil, gas, and mining of minerals including coals and metals.) This evaluation finds that with its global mandate and experience, comprehensive country development focus, and overarching mission to fight poverty, the World Bank Group is well positioned to help countries overcome the policy, institutional, and technical challenges that prevent them from transforming resource endowments into sustainable benefits. Furthermore, the World Bank Group's achievements are many. On the whole, its extractive industries projects have produced positive economic and financial results, though compliance with its environmental and social safeguards remains a challenge. Its research has broadened and deepened understanding of the causes for the disappointing performance of resource-rich countries. Its guidelines for the mitigation of adverse environmental and social impacts have been widely used and appreciated. More recently, it has begun to address the challenge of country governance with a variety of instruments. The World Bank Group can, however, do much to improve its performance in enhancing the extractive industry sector's contribution to sustainable development and poverty reduction. The report identifies three main areas for improvement - formulating an integrated strategy, strengthening implementation and engagement of stakeholders. 5 annexes.

  9. Investigation of surface-plasmon coupled red light emitting InGaN/GaN multi-quantum well with Ag nanostructures coated on GaN surface

    SciTech Connect (OSTI)

    Li, Yi; Liu, Bin E-mail: rzhang@nju.edu.cn; Zhang, Rong E-mail: rzhang@nju.edu.cn; Xie, Zili; Zhuang, Zhe; Dai, JiangPing; Tao, Tao; Zhi, Ting; Zhang, Guogang; Chen, Peng; Ren, Fangfang; Zhao, Hong; Zheng, Youdou

    2015-04-21

    Surface-plasmon (SP) coupled red light emitting InGaN/GaN multiple quantum well (MQW) structure is fabricated and investigated. The centre wavelength of 5-period InGaN/GaN MQW structure is about 620?nm. The intensity of photoluminescence (PL) for InGaN QW with naked Ag nano-structures (NS) is only slightly increased due to the oxidation of Ag NS as compared to that for the InGaN QW. However, InGaN QW with Ag NS/SiO{sub 2} structure can evidently enhance the emission efficiency due to the elimination of surface oxide layer of Ag NS. With increasing the laser excitation power, the PL intensity is enhanced by 25%53% as compared to that for the SiO{sub 2} coating InGaN QW. The steady-state electric field distribution obtained by the three-dimensional finite-difference time-domain method is different for both structures. The proportion of the field distributed in the Ag NS for the GaN/Ag NS/SiO{sub 2} structure is smaller as compared to that for the GaN/naked Ag NS structure. As a result, the energy loss of localized SP modes for the GaN/naked Ag NS structure will be larger due to the absorption of Ag layer.

  10. Conduction and magnetization improvement of BiFeO{sub 3} multiferroic nanoparticles by Ag{sup +} doping

    SciTech Connect (OSTI)

    Ahmed, M.A.; Mansour, S.F.; El-Dek, S.I.; Abu-Abdeen, M.

    2014-01-01

    Graphical abstract: HRTEM micrographs of the samples BiFeO{sub 3}. - Highlights: Flash auto combustion method was successful in the preparation of Ag doped BiFeO{sub 3} in nanosize. Ag doping results in hexagonal platelet shapes up to x = 0.10, at x ? 0.15 needle shape predominates. Mixed conduction is obtained in Ag doped samples. This nanometric multiferroic could be recommended as attractive cathode for solid oxide fuel cell. - Abstract: Nanometric multiferroic namely Ag doped (BiFeO{sub 3}) was synthesized using flash auto combustion technique and glycine as a fuel. Single phase rhombohedralhexagonal perovskite structure was obtained by annealing at 550 C, as determined from XRD. High resolution transmission electron microscope (HRTEM) clarifies the hexagonal platelet shape with size 17.9 nm. Maximum room temperature AC conductivity was obtained at Ag content of x = 0.10. The results of this study promote the use of such multiferroic in solid oxide fuel cell applications.

  11. Milestone Report - M3FT-15OR03120215 - Recommend HIP Conditions for AgZ

    SciTech Connect (OSTI)

    Bruffey, Stephanie H.; Jubin, Robert Thomas

    2015-09-18

    The purpose of this study was to continue research to determine if HIPing could directly convert I-Ag0Z into a suitable waste form. Fiscal year (FY) 2015 work completed studies of Phase IIA, IIB, and IIC samples. Product consistency testing (PCT) of Phase IIA samples resulted in iodine release below detection limit for six of twelve samples. This is promising and indicates that a durable waste form may be produced through HIPing even if transformation of the zeolite to a distinct mineral phase does not occur. From PCT results of Phase IIA samples, it was determined that future pressing should be conducted at a temperature of 900°C. Phase IIC testing continued production of samples to examine the effects of multiple source materials, compositional variations, and an expanded temperature range. The density of each sample was determined and x-ray diffraction (XRD) patterns were obtained. In all cases, there was nothing in the XRD analyses to indicate the creation of any AgI-containing silicon phase; the samples were found to be largely amorphous.

  12. Process control techniques at the blast furnaces of Thyssen Stahl AG

    SciTech Connect (OSTI)

    Kowalski, W.; Bachhofen, H.J.; Beppler, E.; Kreibich, K.; Muelheims, K.; Peters, M.; Wieters, C.U.

    1995-12-01

    Process improvements, capacity increases and the use of modern measuring and process control techniques have helped to ensure that the blast furnace will remain an indispensable means of supplying steelworks with hot metal until well into the next century. The survival of a future-oriented company such as Thyssen Stahl AG depends on long-term improvements in economic viability. Today, Thyssen Stahl AG operates two blast furnace plants comprising a total of five blast furnaces with hearth diameters ranging from 9.3 to 14.9m. This choice of furnaces permits flexible adjustment to changing workload situations and enables about ten million tons of hot metal to be produced each year. The wide range of measuring devices specially fitted on Schwelgern blast furnace No. 1 made a vital contribution to the development of blast furnace models. The purpose of these models was to make a general assessment of the state of the furnace and so create an objective basis for furnace operation. The paper describes the development of these measuring techniques and process model and the application of the model.

  13. EFFECT OF IMPURITIES ON THE PERFORMANCE OF A Pd-Ag DIFFUSER

    SciTech Connect (OSTI)

    Morgan, G.

    2010-12-16

    A commercially fabricated diffuser purchased from Johnson-Matthey, Inc. was evaluated for performance characterization testing at the Savannah River National Laboratory (SRNL). Different impurities are often present in the feed streams of the process diffusers, but the effect of these impurities on the diffuser performance is currently unknown. Various impurities were introduced into the feed stream of the diffuser at various levels ranging from 0.5% to 10% of the total flow in order to determine the effect that these impurities have on the permeation of hydrogen through the palladium-silver membrane. The introduction of various impurities into the feed stream of the diffuser had a minimal effect on the overall permeation of hydrogen through the Pd-Ag membrane. Of the four impurities introduced into the feed stream, carbon monoxide (CO) was the only impurity that showed any evidence of causing a reduction in the amount of hydrogen permeating through the Pd-Ag membrane. The hydrogen permeation returned to its baseline level after the CO was removed from the feed stream. There were no lasting effects of the CO exposure on the ability of the membrane to effectively separate hydrogen from the non-hydrogen species in the gas stream under the conditions tested.

  14. Muon spin relaxation and nonmagnetic Kondo state in PrInAg{sub 2}

    SciTech Connect (OSTI)

    MacLaughlin, D. E.; Department of Physics, University of California, Riverside, California 92521-0413 ; Heffner, R. H.; Nieuwenhuys, G. J.; Canfield, P. C.; Amato, A.; Baines, C.; Schenck, A.; Luke, G. M.; Fudamoto, Y.; Uemura, Y. J.

    2000-01-01

    Muon spin relaxation experiments have been carried out in the Kondo compound PrInAg{sub 2}. The zero-field muon relaxation rate is found to be independent of temperature between 0.1 and 10 K, which rules out a magnetic origin (spin freezing or a conventional Kondo effect) for the previously observed specific-heat anomaly at {approx}0.5 K. At low temperatures the muon relaxation can be quantitatively understood in terms of the muon's interaction with nuclear magnetism, including hyperfine enhancement of the {sup 141}Pr nuclear moment at low temperatures. This argues against a Pr{sup 3+} ground-state electronic magnetic moment, and is strong evidence for the doublet {gamma}{sub 3} crystalline-electric-field-split ground state required for a nonmagnetic route to heavy-electron behavior. The data imply the existence of an exchange interaction between neighboring Pr{sup 3+} ions of the order of 0.2 K in temperature units, which should be taken into account in a complete theory of a nonmagnetic Kondo effect in PrInAg{sub 2}. (c) 2000 The American Physical Society.

  15. Enhanced hydrogenation and reduced lattice distortion in size selected Pd-Ag and Pd-Cu alloy nanoparticles

    SciTech Connect (OSTI)

    Sengar, Saurabh K.; Mehta, B. R.; Kulriya, P. K.; Khan, S. A.

    2013-10-21

    Important correlation between valence band spectra and hydrogenation properties in Pd alloy nanoparticles is established by studying the properties of size selected and monocrystalline Pd, Ag, Cu, Pd-Ag, and Pd-Cu nanoparticles. The X-ray photoelectron spectroscopy and elastic recoil detection analysis show that size induced Pd4d centroid shift is related to enhanced hydrogenation with H/Pd ratio of 0.57 and 0.49 in Pd-Ag and Pd-Cu nanoparticles in comparison to reported bulk values of 0.2 and 0.1, respectively. Pd-alloy nanoparticles show lower hydrogen induced lattice distortion. The reduced distortion and higher hydrogen reactivity of Pd-alloy nanoparticles is important for numerous hydrogen related applications.

  16. Effect of filler metal composition on the strength of yttria stabilized zirconia joints brazed with Pd-Ag-CuOx

    SciTech Connect (OSTI)

    Darsell, Jens T.; Weil, K. Scott

    2008-09-08

    The Ag-CuOx system is of interest to be used to be used as an air braze filler metal for joining high temperature electrochemical devices. Previous work has shown that the melting temperatures can be increased by adding palladium to Ag-CuOx and it is expected that this may aid high temperature stability. This work compares the room temperature bend strength of joints made between yttria-stabilized zirconia (YSZ) air brazed using Ag-CuOx without palladium and with 5 and 15mol% palladium additions. It has been found that in general palladium decreases joint strength, especially in low copper oxide compositions filler metals. At high copper oxide contents, brittle fracture through both copper oxide rich phases and the YSZ limits joint strength.

  17. High efficiency single Ag nanowire/p-GaN substrate Schottky junction-based ultraviolet light emitting diodes

    SciTech Connect (OSTI)

    Wu, Y.; Li, X.; Xu, P.; Wang, Y.; Shen, X.; Liu, X.; Yang, Q.; Hasan, T.

    2015-02-02

    We report a high efficiency single Ag nanowire (NW)/p-GaN substrate Schottky junction-based ultraviolet light emitting diode (UV-LED). The device demonstrates deep UV free exciton electroluminescence at 362.5?nm. The dominant emission, detectable at ultralow (<1??A) forward current, does not exhibit any shifts when the forward current is increased. External quantum efficiency (EQE) as high as 0.9% is achieved at 25??A current at room temperature. Experiments and simulation analysis show that devices fabricated with thinner Ag NWs have higher EQE. However, for very thin Ag NWs (diameter?

  18. Synthesis of g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction with enhanced photocatalytic performance

    SciTech Connect (OSTI)

    He, Peizhi; Song, Limin; Zhang, Shujuan; Wu, Xiaoqing; Wei, Qingwu

    2014-03-01

    Graphical abstract: g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst with visible-light response was prepared by a facile coprecipitation method. The results show that g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} possesses a much higher activity for the decomposition of RhB than that of the pure Ag{sub 3}PO{sub 4} particles. The most mechanism is that g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst can efficiently separate the photogenerated electronhole pairs, enhancing the photocatalytic activity of g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} composites. - Highlights: g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction showed much higher activity than that of Ag{sub 3}PO{sub 4}. The high activity could be attributed to g-C{sub 3}N{sub 4} for modifying Ag{sub 3}PO{sub 4}. More OH radicals may be significant reason to improve Ag{sub 3}PO{sub 4} activity. - Abstract: g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst with visible-light response was prepared by a facile coprecipitation method. The photocatalysts were characterized by X-ray powder diffraction, transmission electron microscopy, UVvis absorption spectroscopy and Fourier transform infrared spectroscopy. The photocatalytic activities of the obtained samples were tested by using Rhodamine B (RhB) as the degradation target under visible light irradiation. g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} decomposed RhB more effectively than the pure Ag{sub 3}PO{sub 4} particles did, and 2 wt.% g-C{sub 3}N{sub 4} had the highest activity. Furthermore, 2 wt.% g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} degraded high-concentration RhB more potently than unmodified Ag{sub 3}PO{sub 4} did, probably because g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst enhanced the photocatalytic activity by efficiently separating the photogenerated electronhole pairs.

  19. Photocatalytic performances and activities of Ag-doped CuFe{sub 2}O{sub 4} nanoparticles

    SciTech Connect (OSTI)

    Zhu, Zhengru; Li, Xinyong; Zhao, Qidong; Li, Yonghua; Sun, Caizhi; Cao, Yongqiang

    2013-08-01

    Graphical abstract: - Highlights: CuFe{sub 2}O{sub 4} nanocrystals were synthesized by a co-precipitation method. Ag/CuFe{sub 2}O{sub 4} catalyst was prepared by the wetness impregnation strategy. The structural properties of Ag/CuFe{sub 2}O{sub 4} were investigated by XRD, TEM, DRS, and XPS techniques. Ag/CuFe{sub 2}O{sub 4} has higher photocatalytic activity. - Abstract: In this work, CuFe{sub 2}O{sub 4} nanoparticles were synthesized by a chemical co-precipitation route. The Ag/CuFe{sub 2}O{sub 4} catalyst was prepared based on the CuFe{sub 2}O{sub 4} nanoparticles by the incipient wetness impregnation strategy, which showed excellent photoelectric property and catalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction (XRD), transmission electronic microscopy (TEM), UVvis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage (SPV) measurement. The photocatalytic degradation of 4-CP by the Ag/CuFe{sub 2}O{sub 4} and CuFe{sub 2}O{sub 4} samples were comparatively studied under xenon lamp irradiation. The results indicate that the Ag/CuFe{sub 2}O{sub 4} sample exhibited the higher efficiency for the degradation of 4-CP.

  20. Nanospherical-lens lithographical Ag nanodisk arrays embedded in p-GaN for localized surface plasmon-enhanced blue light emitting diodes

    SciTech Connect (OSTI)

    Wei, Tongbo Wu, Kui; Sun, Bo; Zhang, Yonghui; Chen, Yu; Huo, Ziqiang; Hu, Qiang; Wang, Junxi; Zeng, Yiping; Li, Jinmin; Lan, Ding

    2014-06-15

    Large-scale Ag nanodisks (NDs) arrays fabricated using nanospherical-lens lithography (NLL) are embedded in p-GaN layer of an InGaN/GaN light-emitting diode (LED) for generating localized surface plasmon (LSP) coupling with the radiating dipoles in the quantum-well (QWs). Based on the Ag NDs with the controlled surface coverage, LSP leads to the improved crystalline quality of regrowth p-GaN, increased photoluminescence (PL) intensity, reduced PL decay time, and enhanced output power of LED. Compared with the LED without Ag NDs, the optical output power at a current of 350 mA of the LSP-enhanced LEDs with Ag NDs having a distance of 20 and 35 nm to QWs is increased by 26.7% and 31.1%, respectively. The electrical characteristics and optical properties of LEDs with embedded Ag NPs are dependent on the distance of between Ag NPs and QWs region. The LED with Ag NDs array structure is also found to exhibit reduced emission divergence, compared to that without Ag NDs.

  1. Do Ag{sub n} (up to n = 8) clusters retain their identity on graphite? Insights from first-principles calculations including dispersion interactions

    SciTech Connect (OSTI)

    Singh, Akansha; Sen, Prasenjit; Majumder, Chiranjib

    2014-04-28

    Adsorption of pre-formed Ag{sub n} clusters for n = 1 ? 8 on a graphite substrate is studied within the density functional theory employing the vdW-DF2 functional to treat dispersion interactions. Top sites above surface layer carbon atoms turn out to be most favorable for a Ag adatom, in agreement with experimental observations. The same feature is observed for clusters of almost all sizes which have the lowest energies when the Ag atoms are positioned over top sites. Most gas phase isomers retain their structures over the substrate, though a couple of them undergo significant distortions. Energetics of the adsorption can be understood in terms of a competition between energy cost of disturbing AgAg bonds in the cluster and energy gain from AgC interactions at the surface. Ag{sub 3} turns out to be an exceptional candidate in this regard that undergoes significant structural distortion and has only two of the Ag atoms close to surface C atoms in its lowest energy structure.

  2. Real-Space Microscopic Electrical Imaging of n+-p Junction Beneath Front-Side Ag Contact of Multicrystalline Si Solar Cells

    SciTech Connect (OSTI)

    Jiang, C. S.; Li, Z. G.; Moutinho, H. R.; Liang, L.; Ionkin, A.; Al-Jassim, M. M.

    2012-04-15

    We investigated the quality of the n+-p diffused junction beneath the front-side Ag contact of multicrystalline Si solar cells by characterizing the uniformities of electrostatic potential and doping concentration across the junction using the atomic force microscopy-based electrical imaging techniques of scanning Kelvin probe force microscopy and scanning capacitance microscopy. We found that Ag screen-printing metallization fired at the over-fire temperature significantly degrades the junction uniformity beneath the Ag contact grid, whereas metallization at the optimal- and under-fire temperatures does not cause degradation. Ag crystallites with widely distributed sizes were found at the Ag-grid/emitter-Si interface of the over-fired cell, which is associated with the junction damage beneath the Ag grid. Large crystallites protrude into Si deeper than the junction depth. However, the junction was not broken down; instead, it was reformed on the entire front of the crystallite/Si interface. We propose a mechanism of junction-quality degradation, based on emitter Si melting at the temperature around the Ag-Si eutectic point during firing, and subsequent re-crystallization with incorporation of Ag and other impurities and with formation of crystallographic defects during quenching. The effect of this junction damage on solar cell performance is discussed.

  3. Mechanistic Investigation of Ethanol SCR of NOx over Ag/Al2O3

    SciTech Connect (OSTI)

    Johnson, William L; Fisher, Galen; Toops, Todd J

    2012-01-01

    A 2 wt.% Ag/{gamma}-Al{sub 2}O{sub 3} catalyst was studied for the ethanol selective catalytic reduction of NO{sub x} from 200 to 550 C and space velocities between 30,000 h{sup -1} and 140,000 h{sup -1}. Peak NO{sub x} conversions reached 85% at 400 C, and an activation energy was determined to be 57 kJ/mol with a feed of ethanol to NO{sub x} or HC{sub 1}/NO{sub x} = 3. Up to 80% of the NO is oxidized to NO{sub 2} at 250 C, but overall NO{sub x} conversion is only 15%. Interestingly, ethanol oxidation occurs at much lower temperatures than NO{sub x} reduction; at 250 C, ethanol oxidation is 80% when flowing ethanol + NO + O{sub 2}. This increased reactivity, compared to only 15% when flowing only ethanol + O{sub 2}, combined with the observation that NO is not oxidized to NO{sub 2} in the absence of ethanol illustrates a synergistic relationship between the reactants. To further investigate this chemistry, a series of DRIFTS experiments were performed. To form nitrates/nitrites on the catalysts it was necessary to include ethanol in the feed with NO. These nitrates/nitrites were readily formed when flowing NO{sub 2} over the catalyst. It is proposed that ethanol adsorbs through an ethoxy-intermediate that results in atomic hydrogen on the surface. This hydrogen aids the release of NO{sub 2} from Ag to the gas-phase which, can be subsequently adsorbed at {gamma}-Al{sub 2}O{sub 3} sites away from Ag. The disappearance of these nitrates/nitrites at higher temperatures proceeds in parallel with the increase in NO{sub x} reduction reactivity between 300 and 350 C observed in the kinetic study. It is therefore proposed that the consumption of nitrates is involved in the rate determining step for this reaction.

  4. Electronic structure and optical properties of Ag{sub 3}PO{sub 4} photocatalyst calculated by hybrid density functional method

    SciTech Connect (OSTI)

    Liu, J. J.; Fu, X. L.; Chen, S. F.; Zhu, Y. F.

    2011-11-07

    The electronic structure and optical properties of Ag{sub 3}PO{sub 4} were studied by hybrid density functional theory. The results indicated that the band gap is 2.43 eV, which agrees well with the experimental value of 2.45 eV. The conduction bands of Ag{sub 3}PO{sub 4} are mainly attributable to Ag 5s and 5p states, while the valence bands are dominated by O 2p and Ag 4d states. The highest valence band edge potential was 2.67 V (vs. normal hydrogen electrode), which has enough driving force for photocatalytic water oxidation and pollutants degradation. The optical absorption spectrum showed that Ag{sub 3}PO{sub 4} is a visible light response photocatalyst.

  5. Methods and apparatuses using filter banks for multi-carrier spread-spectrum signals

    DOE Patents [OSTI]

    Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A

    2014-10-14

    A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

  6. Methods and apparatuses using filter banks for multi-carrier spread-spectrum signals

    DOE Patents [OSTI]

    Moradi, Hussein; Farhang, Behrouz; Kutsche, Carl A

    2014-05-20

    A transmitter includes a synthesis filter bank to spread a data symbol to a plurality of frequencies by encoding the data symbol on each frequency, apply a common pulse-shaping filter, and apply gains to the frequencies such that a power level of each frequency is less than a noise level of other communication signals within the spectrum. Each frequency is modulated onto a different evenly spaced subcarrier. A demodulator in a receiver converts a radio frequency input to a spread-spectrum signal in a baseband. A matched filter filters the spread-spectrum signal with a common filter having characteristics matched to the synthesis filter bank in the transmitter by filtering each frequency to generate a sequence of narrow pulses. A carrier recovery unit generates control signals responsive to the sequence of narrow pulses suitable for generating a phase-locked loop between the demodulator, the matched filter, and the carrier recovery unit.

  7. The Protein Data Bank in Europe (PDBe): bringing structure to biology

    SciTech Connect (OSTI)

    Velankar, Sameer; Kleywegt, Gerard J.

    2011-04-01

    Some future challenges for the PDB and its guardians are discussed and current and future activities in structural bioinformatics at the Protein Data Bank in Europe (PDBe) are described. The Protein Data Bank in Europe (PDBe) is the European partner in the Worldwide PDB and as such handles depositions of X-ray, NMR and EM data and structure models. PDBe also provides advanced bioinformatics services based on data from the PDB and related resources. Some of the challenges facing the PDB and its guardians are discussed, as well as some of the areas on which PDBe activities will focus in the future (advanced services, ligands, integration, validation and experimental data). Finally, some recent developments at PDBe are described.

  8. Energy in Europe and Central Asia: A sector strategy for the World Bank Group

    SciTech Connect (OSTI)

    1998-12-31

    Many countries in the Europe and Central Asia region have had an excess production capacity, lower quality supply, decreasing demand, and inefficient consumption in the energy sector since the late 1980s. This report outlines the four main objectives that form the World Bank Group`s strategy for reform: assisting governments to protect the public interest, supporting economic transition, facilitating private investments, and promoting regional initiatives to increase energy trade.

  9. Enhanced photocatalytic activity of Ag microgrid connected TiO{sub 2} nanocrystalline films

    SciTech Connect (OSTI)

    Pan Feng; Zhang Junying; Zhang Weiwei; Wang Tianmin; Cai Chao

    2007-03-19

    One reason for the high degree of photogenerated carrier recombination was found to be the charge accumulation caused by the uneven reaction area on the photocatalyst surface. The authors connected TiO{sub 2} nanoparticles with conducting Ag microgrid. Obvious photocatalytic activity improvement (81%) over the pure TiO{sub 2} was observed, which is attributed to the electron-hole pairs separation by the metal-semiconductor contact and the large specific area of metal grid, which increased the O{sub 2} absorption and transported the electrons to the sites needed for the deoxidize reactions. This structure lowers the electron accumulation on the particles and improves the utilization ratio of the photoexcited carriers.

  10. Thermal-mechanical properties of epoxy-impregnated Bi-2212/Ag composite

    SciTech Connect (OSTI)

    Li, Pei; Wang, Yang; Godeke, Arno; Ye, Liyang; Flanagan, Gene; Shen, Tengming

    2014-11-26

    In this study, knowledge of the thermal-mechanical properties of epoxy/superconductor/insulation composite is important for designing, fabricating, and operating epoxy impregnated high field superconducting magnets near their ultimate potentials. We report measurements of the modulus of elasticity, Poisson's ratio, and the coefficient of thermal contraction of epoxy-impregnated composite made from the state-of-the-art powder-in-tube multifilamentary Ag/Bi2Sr2CaCu2Ox round wire at room temperature and cryogenic temperatures. Stress-strain curves of samples made from single-strand and Rutherford cables were tested under both monotonic and cyclic compressive loads, with single strands insulated using a thin TiO2 insulation coating and the Rutherford cable insulated with a braided ceramic sleeve.

  11. Thermal-mechanical properties of epoxy-impregnated Bi-2212/Ag composite

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Pei; Wang, Yang; Fermi National Accelerator Lab.; Godeke, Arno; National High Magnetic Field Lab., Tallahassee, FL; Ye, Liyang; Fermi National Accelerator Lab.; Flanagan, Gene; Shen, Tengming

    2014-11-26

    In this study, knowledge of the thermal-mechanical properties of epoxy/superconductor/insulation composite is important for designing, fabricating, and operating epoxy impregnated high field superconducting magnets near their ultimate potentials. We report measurements of the modulus of elasticity, Poisson's ratio, and the coefficient of thermal contraction of epoxy-impregnated composite made from the state-of-the-art powder-in-tube multifilamentary Ag/Bi2Sr2CaCu2Ox round wire at room temperature and cryogenic temperatures. Stress-strain curves of samples made from single-strand and Rutherford cables were tested under both monotonic and cyclic compressive loads, with single strands insulated using a thin TiO2 insulation coating and the Rutherford cable insulated with a braided ceramicmore » sleeve.« less

  12. Method and etchant to join ag-clad BSSCO superconducting tape

    DOE Patents [OSTI]

    Balachandran, Uthamalingam; Iyer, Anand N.; Huang, Jiann Yuan

    1999-01-01

    A method of removing a silver cladding from high temperature superconducting material clad in silver (HTS) is disclosed. The silver clad HTS is contacted with an aqueous solution of HNO.sub.3 followed by an aqueous solution of NH.sub.4 OH and H.sub.2 O.sub.2 for a time sufficient to remove the silver cladding from the superconducting material without adversely affecting the superconducting properties of the superconducting material. A portion of the silver cladding may be masked with a material chemically impervious to HNO.sub.3 and to a combination of NH.sub.4 OH and H.sub.2 O.sub.2 to preserve the Ag coating. A silver clad superconductor is disclosed, made in accordance with the method discussed.

  13. Method and etchant to join Ag-clad BSSCO superconducting tape

    DOE Patents [OSTI]

    Balachandran, U.; Iyer, A.N.; Huang, J.Y.

    1999-03-16

    A method of removing a silver cladding from high temperature superconducting material clad in silver (HTS) is disclosed. The silver clad HTS is contacted with an aqueous solution of HNO{sub 3} followed by an aqueous solution of NH{sub 4}OH and H{sub 2}O{sub 2} for a time sufficient to remove the silver cladding from the superconducting material without adversely affecting the superconducting properties of the superconducting material. A portion of the silver cladding may be masked with a material chemically impervious to HNO{sub 3} and to a combination of NH{sub 4}OH and H{sub 2}O{sub 2} to preserve the Ag coating. A silver clad superconductor is disclosed, made in accordance with the method discussed. 3 figs.

  14. Thermal-mechanical Properties of Epoxy-impregnated Bi-2212/Ag Composite

    SciTech Connect (OSTI)

    Li, Pei [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Wang, Yang [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Godeke, Arno [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Ye, Liyang [North Carolina State Univ., Raleigh, NC (United States); Flanagan, Gene [Muons Inc., Batavia, IL (United States); Shen, Tengming [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States)

    2014-11-26

    Knowledge of the thermal-mechanical properties of epoxy/superconductor/insulation composite is important for designing, fabricating, and operating epoxy impregnated high field superconducting magnets near their ultimate potentials. We report measurements of the modulus of elasticity, Poissons ratio, and the coefficient of thermal contraction of epoxy-impregnated composite made from the state-of-the-art powder-in-tube multifilamentary Ag/Bi2Sr2CaCu2Ox round wire at room temperature and cryogenic temperatures. Stress-strain curves of samples made from single-strand and Rutherford cables were tested under both monotonic and cyclic compressive loads, with single strands insulated using a thin TiO2 insulation coating and the Rutherford cable insulated with a braided ceramic sleeve.

  15. Facile deposition of Ag{sub 3}PO{sub 4} on graphene-like MoS{sub 2} nanosheets for highly efficient photocatalysis

    SciTech Connect (OSTI)

    Wang, Peifu; Shi, Penghui; Hong, Yuanchen; Zhou, Xuejun; Yao, Weifeng

    2015-02-15

    Graphical abstract: The photocatalytic performance of Ag{sub 3}PO{sub 4} was highly improved by the in situ deposition of Ag{sub 3}PO{sub 4} particles on graphene-like MoS{sub 2} nanosheets. - Highlights: A novel composite photocatalyst was synthesized by depositing Ag{sub 3}PO{sub 4} on the graphene-like MoS{sub 2} nanosheets. Ag{sub 3}PO{sub 4}/MoS{sub 2} photocatalyst exhibited a high photocatalytic activity for RhB degradation. Graphene-like MoS{sub 2} nanosheets. MoS{sub 2} nanosheets play an important role in photocatalytic activity by serving as an effective acceptor of the photogenerated carriers. - Abstract: A facile method for the in situ deposition of Ag{sub 3}PO{sub 4} on graphene-like MoS{sub 2} nanosheets was developed to improve the photocatalytic performance of Ag{sub 3}PO{sub 4} catalysts. The heterostructure of Ag{sub 3}PO{sub 4}/MoS{sub 2} composites was characterized by using X-ray diffraction spectra (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The prepared Ag{sub 3}PO{sub 4}/MoS{sub 2} photocatalyst exhibited a much higher photocatalytic activity than that of Ag{sub 3}PO{sub 4} for the degradation of Rhodamine B (RhB) under visible light irradiation (>400 nm). The improved photocatalytic activity of Ag{sub 3}PO{sub 4}/MoS{sub 2} is attributed to the efficient separation of photogenerated electronhole pairs in the composite. This result provides a new perspective on the design of high-performance photocatalysts which is promising for energy applications.

  16. Thermoelectric device including an alloy of GeTe and AgSbTe as the P-type element

    DOE Patents [OSTI]

    Skrabek, Emanuel Andrew; Trimmer, Donald Smith

    1976-01-01

    Improved alloys suitable for thermoelectric applications and having the general formula: (AgSbTe.sub.2).sub.1.sub.-x + (GeTe).sub.x wherein x has a value of about 0.80 and 0.85, have been found to possess unexpectedly high thermoelectric properties such as efficiency index, as well as other improved physical properties.

  17. Anharmonic lattice dynamics of Ag2O studied by inelastic neutron scattering and first-principles molecular dynamics simulations

    SciTech Connect (OSTI)

    Lan, Tian [California Institute of Technology, Pasadena] [California Institute of Technology, Pasadena; Li, Chen [ORNL] [ORNL; Niedziela, Jennifer L [ORNL] [ORNL; Smith, Hillary [California Institute of Technology, Pasadena] [California Institute of Technology, Pasadena; Abernathy, Douglas L [ORNL] [ORNL; Rossman, George [California Institute of Technology, Pasadena] [California Institute of Technology, Pasadena; Fultz, B. [California Institute of Technology, Pasadena] [California Institute of Technology, Pasadena

    2014-01-01

    Inelastic neutron scattering measurements on silver oxide (Ag2O) with the cuprite structure were performed at temperatures from 40 to 400 K, and Fourier transform far-infrared spectra were measured from 100 to 300 K. The measured phonon densities of states and the infrared spectra showed unusually large energy shifts with temperature, and large linewidth broadenings. First principles molecular dynamics (MD) calculations were performed at various temperatures, successfully accounting for the negative thermal expansion (NTE) and local dynamics. Using the Fourier-transformed velocity autocorrelation method, the MD calculations reproduced the large anharmonic effects of Ag2O, and were in excellent agreement with the neutron scattering data. The quasiharmonic approximation (QHA) was less successful in accounting for much of the phonon behavior. The QHA could account for some of the NTE below 250 K, although not at higher temperatures. Strong anharmonic effects were found for both phonons and for the NTE. The lifetime broadenings of Ag2O were explained by anharmonic perturbation theory, which showed rich interactions between the Ag-dominated modes and the O-dominated modes in both up- and down-conversion processes.

  18. Phase transformations during the Ag-In plating and bonding of vertical diode elements of multijunction solar cells

    SciTech Connect (OSTI)

    Klochko, N. P. Khrypunov, G. S.; Volkova, N. D.; Kopach, V. R.; Lyubov, V. N.; Kirichenko, M. V.; Momotenko, A. V.; Kharchenko, N. M.; Nikitin, V. A.

    2013-06-15

    The conditions of the bonding of silicon multijunction solar cells with vertical p-n junctions using Ag-In solder are studied. The compositions of electrodeposited indium films on silicon wafers silver plated by screen printing and silver and indium films fabricated by layer-by-layer electrochemical deposition onto the surface of silicon vertical diode cells silver plated in vacuum are studied. Studying the electrochemical-deposition conditions, structure, and surface morphology of the grown layers showed that guaranteed bonding is provided by 8-min heat treatment at 400 Degree-Sign C under the pressure of a stack of metallized silicon wafers; however, the ratio of the indium and silver layer thicknesses should not exceed 1: 3. As this condition is satisfied, the solder after wafer bonding has the InAg{sub 3} structure (or InAg{sub 3} with an Ag phase admixture), due to which the junction melting point exceeds 700 Degree-Sign C, which guarantees the functioning of such solar cells under concentrated illumination.

  19. THE ELECTRONIC STRUCTURE OF AG/CU(100) SURFACE ALLOYS STUDIES BY AUGER-PHOTOELECTRON COINCIDENCE SPECTROSCOPY.

    SciTech Connect (OSTI)

    ARENA,D.A.; BARTYNSKI,R.A.; HULBERT,S.L.

    2001-10-08

    We have measured the Ag and Pd M{sub 5}VV Auger spectrum in coincidence with Ag and Pd 4d{sub 5/2} photoelectrons for the Ag/Cu(100) and Pd/Cu(100) systems, respectively, as a function of admetal coverage. These systems form surface alloys (i.e. random substitutional alloys in the first atomic layer) for impurity concentrations in the 0.1 monolayer range. For these systems, the centroid of the impurity 4d levels is expected to shift away from the Fermi level by {approx}1 eV [Ruban et al., Journal of Molecular Catalysis. A 115 (1997) 421], an effect that should be easily seen in coincidence core-valence-valence Auger spectra. We find that the impurity Auger spectra of both systems shift in a manner that is consistent with d-band moving away from EF. However, the shift for Pd is considerably smaller than expected, and a shift almost absent for Ag. The disagreement between theory and experiment is most likely caused by the neglect of lattice relaxations in the calculations.

  20. Initial Effects of NOx on Idodine and Methyl Iodine Loading of AgZ and Aerogels

    SciTech Connect (OSTI)

    Bruffey, Stephanie H.; Jubin, Robert Thomas

    2015-03-31

    This initial evaluation provides insight into the effect of NO on the adsorption of both I2 and CH3I onto reduced silver-exchanged mordenite (Ag0Z). It was determined that adsorption of CH3I onto Ag0Z occurs at approximately 50% of the rate of I2 adsorption onto Ag0Z, although total iodine capacities are comparable. Addition of 1% NO to the simulated off-gas stream results in very similar loading behaviors and iodine capacities for both iodine species. This is most likely an effect of CH3I oxidation to I2 by NO prior to contact with the sorbent bed. Completion of tests including NO2 in the simulated off-gas stream was delayed due to vendor NO2 production schedules. A statistically designed test matrix is partially completed, and upon conclusion of the suggested experiments, the effects of temperature, NO, NO2, and water vapor on the sorption of CH3I and I2 onto Ag0Z will be able to be statistically resolved. This work represents progress towards that aim.

  1. Benefits of Carrier Pocket Anisotropy to Thermoelectric Performance: The case of p-type AgBiSe2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Parker, David S; May, Andrew F; Singh, David J

    2015-01-01

    We study theoretically the effects of anisotropy on the thermoelectric performance of p-type AgBiSe2. We present an apparent realization of the thermoelectric benefits of one-dimensional plate-like carrier pocket anisotropy in the valence band of this material. Based on first principles calculations we find a substantial anisotropy in the electronic structure, likely favorable for thermoelectric performance, in the valence bands of the hexagonal phase of the silver chalcogenide thermoelectric AgBiSe2, while the conduction bands are more isotropic, and in our experiments do not attain high performance. AgBiSe2 has already exhibited a ZT value of 1.5 in a high-temperature disordered fcc phase,more » but room-temperature performance has not been demonstrated. We develop a theory for the ability of anisotropy to decouple the density-of-states and conductivity effective masses, pointing out the influence of this effect in the high performance thermoelectrics Bi2Te3 and PbTe. From our first principles and Boltzmann transport calculations we find that p-type AgBiSe2 has substantial promise as a room temperature thermoelectric, and estimate its performance.« less

  2. Benefits of Carrier Pocket Anisotropy to Thermoelectric Performance: The case of p-type AgBiSe2

    SciTech Connect (OSTI)

    Parker, David S; May, Andrew F; Singh, David J

    2015-01-01

    We study theoretically the effects of anisotropy on the thermoelectric performance of p-type AgBiSe2. We present an apparent realization of the thermoelectric benefits of one-dimensional plate-like carrier pocket anisotropy in the valence band of this material. Based on first principles calculations we find a substantial anisotropy in the electronic structure, likely favorable for thermoelectric performance, in the valence bands of the hexagonal phase of the silver chalcogenide thermoelectric AgBiSe2, while the conduction bands are more isotropic, and in our experiments do not attain high performance. AgBiSe2 has already exhibited a ZT value of 1.5 in a high-temperature disordered fcc phase, but room-temperature performance has not been demonstrated. We develop a theory for the ability of anisotropy to decouple the density-of-states and conductivity effective masses, pointing out the influence of this effect in the high performance thermoelectrics Bi2Te3 and PbTe. From our first principles and Boltzmann transport calculations we find that p-type AgBiSe2 has substantial promise as a room temperature thermoelectric, and estimate its performance.

  3. Two-photon Photoemission of Organic Semiconductor Molecules on Ag(111)

    SciTech Connect (OSTI)

    Yang, Aram; Yang, Aram

    2008-05-15

    Angle- and time-resolved two-photon photoemission (2PPE) was used to study systems of organic semiconductors on Ag(111). The 2PPE studies focused on electronic behavior specific to interfaces and ultrathin films. Electron time dynamics and band dispersions were characterized for ultrathin films of a prototypical n-type planar aromatic hydrocarbon, PTCDA, and representatives from a family of p-type oligothiophenes.In PTCDA, electronic behavior was correlated with film morphology and growth modes. Within a fewmonolayers of the interface, image potential states and a LUMO+1 state were detected. The degree to which the LUMO+1 state exhibited a band mass less than a free electron mass depended on the crystallinity of the layer. Similarly, image potential states were measured to have free electron-like effective masses on ordered surfaces, and the effective masses increased with disorder within the thin film. Electron lifetimes were correlated with film growth modes, such that the lifetimes of electrons excited into systems created by layer-by-layer, amorphous film growth increased by orders of magnitude by only a few monolayers from the surface. Conversely, the decay dynamics of electrons in Stranski-Krastanov systems were limited by interaction with the exposed wetting layer, which limited the barrier to decay back into the metal.Oligothiophenes including monothiophene, quaterthiophene, and sexithiophene were deposited on Ag(111), and their electronic energy levels and effective masses were studied as a function of oligothiophene length. The energy gap between HOMO and LUMO decreased with increasing chain length, but effective mass was found to depend on domains from high- or low-temperature growth conditions rather than chain length. In addition, the geometry of the molecule on the surface, e.g., tilted or planar, substantially affected the electronic structure.

  4. Clean energy for development investment framework: the World Bank Group action plan

    SciTech Connect (OSTI)

    2007-03-06

    In September 2005 the Development Committee requested the World Bank to develop an Investment Framework for Clean Energy and Development - in the context of the Gleneagles Communique on Climate Change, Clean Energy and Sustainable Development which was issued in July 2005. This Action Plan provides an update of work undertaken to date as well as actions planned by the World Bank Group (WBG) in support of the Clean Energy for Development Investment Framework (CEIF). The Action Plan relies on partnerships, including with the International Financial Institutions (IFIs) and the private sector. While it concentrates on maximizing and extending existing instruments, it provides for continued dialogue with governments and the private sector on new approaches to accelerate the transition to a low carbon economy. In addition to increased investments, the private sector has an important role to play in closing the investment gap in many countries. Projects such as Bujagali (Uganda), Nam Theun II (Laos) and China and India Thermal Power Plant Rehabilitation projects are examples of how partnerships with the private sector can work, both on financing but also on enhancing the overall regulatory framework for enhanced partnerships. The report was prepared for the 15 April 2007 Development Committee meeting, a joint committee of the Board of Governors of the World Bank and the International Monetary Fund on the transfer of real resources to developing countries. 3 figs., 3 tabs., 5 annexes.

  5. Slope and bank erosional stability of the Canonsburg, Pennsylvania, UMTRA disposal site

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This report was prepared in response to US Nuclear Regulatory Commission (NRC) comments received in a letter of 8 March 1994. This letter included discussions of the US Department of Energy (DOE) 21 May 1993 geomorphic report for the Canonsburg, Pennsylvania, site. To clarify the NRC`s position, a DOE/NRC conference call was held on 12 April 1994. The NRC clarified that it did not require a preliminary erosion protection design for the Canonsburg site, but directed the DOE to address a ``one-bad-year`` scenario. The NRC wants confirmation that one bad year of stream flooding and landsliding will not release residual radioactive material (RRM) from the Canonsburg site into the creek. The NRC is concerned that a bad year theoretically could occur between postcell-closure inspections. These annual inspections are conducted in September or October. The NRC suggested that the following procedures should be conducted in this analysis: a flooding analysis, including the maximum saturation levels (flood water elevations) anticipated during a 100-year flood; a stream bank erosion analysis to determine how much of the bank adjacent to the site may be removed in a bad year; a slope stability analysis to determine how far back the site would be disturbed by slope instability that could be triggered by a bad year of stream bank erosion; and a ``critical cross section`` study to show the relationship of the RRM located outside the disposal cell to the maximum computer estimated erosion/landslide activity.

  6. Tube bank wastage in the Grimethorpe pressurized fluidized-bed combustor

    SciTech Connect (OSTI)

    Not Available

    1987-04-01

    The coal-fired pressurized fluidized bed combustion (PFBC) at Grimethorpe, England, was run for over 3600 hours of combustion testing under the joint sponsorship of the governments of the Federal Republic of Germany, the United Kingdom, and the US. Early in the course of these tests, significant metal wastage was experienced, especially on the inbed heat transfer tubes. This paper describes the modifications to design and new alloys which were tested in the PFBC. Operating conditions for three tube banks are given. A new tube bank, D, has been designed which incorporates a variety of alloy types, a number of tubes designed to operate at higher temperatures than those typical of the rest of the tube bank, and some tubes fitted with fins. The datum fluidizing velocity has been reduced to 0.8 m/sec. The effects of these variables: metal surface temperature, alloy chromium content, fin or stud arrangements, and fluidizing velocity, will be investigated in a continuing program funded by British Coal and the Central Electricity Generating Board of the UK, with some participation from the US Department of Energy and the Electric Power Research Institute. 3 references, 5 figures, 1 table.

  7. Incident report. Tube Bank C-metal wastage status report, November 1982

    SciTech Connect (OSTI)

    Not Available

    1982-11-01

    During the Hot Commissioning tests in preparation for Test Series 2, a significant degree of metal wastage occurred on the external surfaces of Tube Bank 'C'. The extent of the metal wastage was unexpected and has been a matter of concern to the Project. The report provides a history of the operational period for Tube Bank 'C' and details the measurements of metal wastage that have been recorded. The project has initiated an extensive study of the possible cause, or causes, of the metal wastage and these are discussed. Operational tests are to be carried out at Grimethorpe, CURL and CRE with a view to determining the mechanism of metal wastage that exists within the fluidized bed. The results of these tests will be reported and will form the basis for the design of a new bank, which will be installed in the combustor in due course, if required. The Project is taking necessary steps to ensure that the cause of the metal wastage is fully investigated and that the resultant slippage in the Test Series 2 schedule is minimised.

  8. Green Synthesis of Ag and Pd Nanospheres, Nanowires, and Nanorods Using Vitamin B 2 : Catalytic Polymerisation of Aniline and Pyrrole

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nadagouda, Mallikarjuna N.; Varma, Rajender S.

    2008-01-01

    Formore » the first time, we report green chemistry approach using vitamin B 2 in the synthesis of silver (Ag) and palladium (Pd), nanospheres, nanowires, and nanorods at room temperature without using any harmful reducing agents, such as sodium borohydride ( NaBH 4 ) or hydroxylamine hydrochloride and any special capping or dispersing agent. Vitamin B 2 was used as reducing agent as well as capping agent due to its high-water solubility, biodegradability, and low-toxicity compared with other reducing agents. The average particle size of nanoprticle was found to be Ag (average size 6.1 ± 0.1 nm) and Pd (average size 4.1 ± 0.1 nm) nanoparticles in ethylene glycol and Ag (average size 5.9 ± 0.1 nm, and average size 6.1 ± 0.1) nanoparticles in acetic acid and NMP, respectively. The formation of noble multiple shape nanostructures and their self assembly were dependent on the solvent employed for the preparation. When water was used as solvent media, Ag and Pd nanoparticles started to self-assemble into rod-like structures and in isopropanol Ag and Pd nanoparticles yielded wire-like structures with a thickness in the range of 10 to 20 nm and several hundred microns in length. In acetone and acetonitrile medium, the Ag and Pd nanoparticles are self-assembled into a regular pattern making nanorod structures with thicknesses ranging from 100 to 200 nm and lengths of a few microns. The so-synthesized nanostructures were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and UV spectroscopy. The ensuing Ag and Pd nanoparticles catalyzed the reactions of aniline and pyrrole to generate polyaniline and polypyrrole nanofibers and may find various technological and biological applications. This single-step greener approach is general and can be extended to other noble metals and transition metal oxides.« less

  9. DB-6 Precedent Transactions.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aug-11 Wind Energy Transmission Texas CREZ Rate Recovery Debt Mitsubishi UFJ, Deutsche Bank 500,000,000 Nov-11 Lone Star CREZ Rate Recovery Debt Mitsubishi UFJ, Mizuho, Credit ...

  10. EGFR tyrosine kinase inhibitory peptide attenuates Helicobacter pylori-mediated hyper-proliferation in AGS enteric epithelial cells

    SciTech Connect (OSTI)

    Himaya, S.W.A.; Dewapriya, Pradeep; Kim, Se-Kwon

    2013-06-15

    Helicobacter pylori infection is one of the most critical causes of stomach cancer. The current study was conducted to explore the protective effects of an isolated active peptide H-P-6 (Pro-Gln-Pro-Lys-Val-Leu-Asp-Ser) from microbial hydrolysates of Chlamydomonas sp. against H. pylori-induced carcinogenesis. The peptide H-P-6 has effectively suppressed H. pylori-induced hyper-proliferation and migration of gastric epithelial cells (AGS). However, the peptide did not inhibit the viability of the bacteria or invasion into AGS cells. Therefore, the effect of the peptide on regulating H. pylori-induced molecular signaling was investigated. The results indicated that H. pylori activates the EGFR tyrosine kinase signaling and nuclear translocation of the ?-catenin. The EGFR activation has led to the up-regulation of PI3K/Akt signaling pathway. Moreover, the nuclear translocation levels of ?-catenin were significantly increased as a result of Akt mediated down-regulation of GSK3/? protein levels in the cytoplasm. Both of these consequences have resulted in increased expression of cell survival and migration related genes such as c-Myc, cyclin-D, MMP-2 and matrilysin. Interestingly, the isolated peptide potently inhibited H. pylori-mediated EGFR activation and thereby down-regulated the subsequent P13K/Akt signaling leading to ?-catenin nuclear translocation. The effect of the peptide was confirmed with the use of EGFR tyrosine kinase inhibitor AG1487 and molecular docking studies. Collectively this study identifies a potent peptide which regulates the H. pylori-induced hyper-proliferation and migration of AGS cells at molecular level. - Highlights: Chlamydomonas sp. derived peptide H-P-6 inhibits H. pylori-induced pathogenesis. H-P-6 suppresses H. pylori-induced hyper-proliferation and migration of AGS cells. The peptide inhibits H. pylori-induced EGFR activation.

  11. Synthesis and properties of new CdSe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses

    SciTech Connect (OSTI)

    Kassem, M.; ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque ; Le Coq, D.; Fourmentin, M.; Hindle, F.; Bokova, M.; Cuisset, A.; Masselin, P.; Bychkov, E.; ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque

    2011-02-15

    Research highlights: {yields} Determination of the glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system. {yields} Characterization of macroscopic properties of the new CdSe-AgI-As{sub 2}Se{sub 3} glasses. {yields} Far infrared transmission of chalcogenide glasses. {yields} Characterization of the total conductivity of CdSe-AgI-As{sub 2}Se{sub 3} glasses. -- Abstract: The glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system was determined. Measurements including differential scanning calorimetry (DSC), density, and X-ray diffraction were performed. The effect resulting from the addition of CdSe or AgI has been highlighted by examining three series of different base glasses. The characteristic temperatures of the glass samples, including glass transition (T{sub g}), crystallisation (T{sub x}), and melting (T{sub m}) temperatures are reported and used to calculate their {Delta}T = T{sub x} - T{sub g} and their Hruby, H{sub r} = (T{sub x} - T{sub g})/(T{sub m} - T{sub x}), criteria. Evolution of the total electrical conductivity {sigma} and the room temperature conductivity {sigma}{sub 298} was also studied. The terahertz transparency domain in the 50-600 cm{sup -1} region was pointed for different chalcogenide glasses (ChGs) and the potential of the THz spectroscopy was suggested to obtain structural information on ChGs.

  12. Spin glass in semiconducting KFe1.05Ag0.88Te2 single crystals

    SciTech Connect (OSTI)

    Ryu, H.; Lei, H.; Klobes, B.; Warren, J. B.; Hermann, R. P.; Petrovic, C.

    2015-05-26

    We report discovery of KFe1.05Ag0.88Te2 single crystals with semiconducting spin glass ground state. Composition and structure analysis suggest nearly stoichiometric I4/mmm space group but allow for the existence of vacancies, absent in long range semiconducting antiferromagnet KFe1.05Ag0.88Te2. The subtle change in stoichometry in Fe/Ag sublattice changes magnetic ground state but not conductivity, giving further insight into the semiconducting gap mechanism.

  13. Structure of AgI-doped Ge-In-S glasses: Experiment, reverse Monte Carlo modelling, and density functional calculations

    SciTech Connect (OSTI)

    Chrissanthopoulos, A.; Jovari, P.; Kaban, I.; Gruner, S.; Kavetskyy, T.; Borc, J.; Wang, W.; Ren, J.; Chen, G.; Yannopoulos, S.N.

    2012-08-15

    We report an investigation of the structure and vibrational modes of Ge-In-S-AgI bulk glasses using X-ray diffraction, EXAFS spectroscopy, Reverse Monte-Carlo (RMC) modelling, Raman spectroscopy, and density functional theoretical (DFT) calculations. The combination of these techniques made it possible to elucidate the short- and medium-range structural order of these glasses. Data interpretation revealed that the AgI-free glass structure is composed of a network where GeS{sub 4/2} tetrahedra are linked with trigonal InS{sub 3/2} units; S{sub 3/2}Ge-GeS{sub 3/2} ethane-like species linked with InS{sub 4/2}{sup -} tetrahedra form sub-structures which are dispersed in the network structure. The addition of AgI into the Ge-In-S glassy matrix causes appreciable structural changes, enriching the Indium species with Iodine terminal atoms. The existence of trigonal species InS{sub 2/2}I and tetrahedral units InS{sub 3/2}I{sup -} and InS{sub 2/2}I{sub 2}{sup -} is compatible with the EXAFS and RMC analysis. Their vibrational properties (harmonic frequencies and Raman activities) calculated by DFT are in very good agreement with the experimental values determined by Raman spectroscopy. - Graphical abstract: Experiment (XRD, EXAFS, RMC, Raman scattering) and density functional calculations are employed to study the structure of AgI-doped Ge-In-S glasses. The role of mixed structural units as illustrated in the figure is elucidated. Highlights: Black-Right-Pointing-Pointer Doping Ge-In-S glasses with AgI causes significant changes in glass structure. Black-Right-Pointing-Pointer Experiment and DFT are combined to elucidate short- and medium-range structural order. Black-Right-Pointing-Pointer Indium atoms form both (InS{sub 4/2}){sup -} tetrahedra and InS{sub 3/2} planar triangles. Black-Right-Pointing-Pointer (InS{sub 4/2}){sup -} tetrahedra bond to (S{sub 3/2}Ge-GeS{sub 3/2}){sup 2+} ethane-like units forming neutral sub-structures. Black-Right-Pointing-Pointer Mixed chalcohalide species (InS{sub 3/2}I){sup -} offer vulnerable sites for the uptake of Ag{sup +}.

  14. Thermal shock analysis of the BNL/AGS mercury target experiments

    SciTech Connect (OSTI)

    Kim, S.H.; Taleyarkhan, R.P.; Haines, J.R.

    1999-09-01

    The Spallation Neutron Source is a 1-MW accelerator-based pulsed neutron source facility being designed by several national laboratories and led by Oak Ridge National Laboratory. Liquid mercury will be used as the target material. Several important issues must be resolved to ensure the feasibility of mercury as a target material. One of the key issues is related to the thermal shock loads caused by rapid energy deposition of the proton beam to the mercury target. The rate of temperature rise is enormous ({approximately}10{sup 7} C/s) during the very brief beam pulse ({approximately}0.5 {micro}s). The pressure waves will interact with the target structure walls and the bulk flow field. Understanding and predicting propagation of pressure pulses are critical for establishing the feasibility of construction and safe operation of the facility. To resolve such issues, a benchmarking database needs to be developed to validate computational models calculating the pressure wave behavior in the mercury target. Collaboration was initiated to conduct experiments wit h a close- to full-scale cylindrical vessel filled with mercury. Specific experiments were conducted at the Brookhaven National Laboratory`s Alternating Gradient Synchrotron (AGS) in June of 1997. In these experiments, a high-energy (24-GeV) proton beam deposited {approximately}61% of its energy in the mercury target over a time period of {approximately}0.1 {micro}s. Several optical strain gauges were attached to the surface of the steel target wall. The proton pulse shape was roughly parabolic and was estimated to be of {approximately}0.05 m in radius. Computational models were developed and validated against the AGS data. The ANSYS/Multiphysics code system modeled the test target in Ref. 3, using acoustic elements for mercury fluid and solid elements for the target wall. The authors discuss a two-dimensional model of the ANSYS/Multiphysics code for the same test target. In this effort, solid elements were used to model the liquid mercury without allowing shear between these mercury elements. The ANSYS code uses the implicit Newmark time integration method, coupled with Newton-Raphson solution techniques to obtain the time histories. Materials were assumed to be homogeneous and isotropic, and viscous dissipation was neglected in the calculations. Figure 1 shows a comparison between the calculation and the data. Also, a comparison against the CTH results is included in the same figure.

  15. Regional geology of Georges Bank basin - OCS Sale 42 drilling results

    SciTech Connect (OSTI)

    High, L.R. Jr.

    1985-02-01

    Industry bid aggressively in OCS Sale 42, spending $816 million. Eight wildcats were drilled in 1981-82 to test 5 major plays. All wells were dry; no potential reservoir or source rocks were found. The tectonic-stratigraphic framework of the Georges Bank basin is that of an Atlantic-type plate margin. Two major unconformities divide the section into prerift, synrift, and postrift sequences. The prerift sequence consists of Paleozoic metasediments in basement fault blocks. Synrift sediments consist of Newark Group equivalents: the Argo Salt and the Iroquoi Formation. The postrift sequence consists of Mohican red beds overlain by progradational wedges, with the carbonate Abenaki Formation at the base. The objective in 4 of the 8 wildcats was the Iroquois Formation. Mobil 312-1 and Shell 357-1 were drilled into a seismic anomaly interpreted to be a reef. This structure was found to be a complex carbonate mound. Exxon 975-1 was drilled on a seismic amplitude anomaly variously interpreted to be the result of salt, coal, or porous carbonates. This anomaly proved to be caused by a salt bed. The objective in Shell 410-1R was carbonate banks over a basement horst block. No significant zones of porosity were found. The remaining 4 wildcats were drilled on Abenaki prospects. Mobil 273-1, Tenneco 187-1d, and Conoco 145-1 were drilled for possible carbonate banks over a salt structure. Only thin oolitic grainstone intervals were found. Exxon 133-1 was based on a seismic anomaly interpreted to be a patch reef. This feature was found to be a volcanic cone.

  16. The green bank northern celestial cap pulsar survey. I. Survey description, data analysis, and initial results

    SciTech Connect (OSTI)

    Stovall, K.; Dartez, L. P.; Ford, A. J.; Garcia, A.; Hinojosa, J.; Jenet, F. A.; Leake, S.; Lynch, R. S.; Archibald, A. M.; Karako-Argaman, C.; Kaspi, V. M.; Ransom, S. M.; Banaszak, S.; Biwer, C. M.; Day, D.; Flanigan, J.; Kaplan, D. L.; Boyles, J.; Hessels, J. W. T.; Kondratiev, V. I.; and others

    2014-08-10

    We describe an ongoing search for pulsars and dispersed pulses of radio emission, such as those from rotating radio transients (RRATs) and fast radio bursts, at 350 MHz using the Green Bank Telescope. With the Green Bank Ultimate Pulsar Processing Instrument, we record 100 MHz of bandwidth divided into 4096 channels every 81.92 μs. This survey will cover the entire sky visible to the Green Bank Telescope (δ > –40°, or 82% of the sky) and outside of the Galactic Plane will be sensitive enough to detect slow pulsars and low dispersion measure (<30 pc cm{sup –3}) millisecond pulsars (MSPs) with a 0.08 duty cycle down to 1.1 mJy. For pulsars with a spectral index of –1.6, we will be 2.5 times more sensitive than previous and ongoing surveys over much of our survey region. Here we describe the survey, the data analysis pipeline, initial discovery parameters for 62 pulsars, and timing solutions for 5 new pulsars. PSR J0214+5222 is an MSP in a long-period (512 days) orbit and has an optical counterpart identified in archival data. PSR J0636+5129 is an MSP in a very short-period (96 minutes) orbit with a very low mass companion (8 M{sub J}). PSR J0645+5158 is an isolated MSP with a timing residual RMS of 500 ns and has been added to pulsar timing array experiments. PSR J1434+7257 is an isolated, intermediate-period pulsar that has been partially recycled. PSR J1816+4510 is an eclipsing MSP in a short-period orbit (8.7 hr) and may have recently completed its spin-up phase.

  17. Low jitter spark gap switch for repetitively pulsed parallel capacitor banks

    SciTech Connect (OSTI)

    Rohwein, G. J.

    1980-01-01

    A two-section air insulated spark gap has been developed for switching multi-kilojoule plus-minus charged parallel capacitor banks which operate continuously at pulse rates up to 20 pps. The switch operates with less than 2 ns jitter, recovers its dielectric strength within 2 to 5 ms and has not shown degraded performance in sequential test runs totaling over a million shots. Its estimated life with copper electrodes is > 10/sup 7/ shots. All preliminary tests indicate that the switch is suitable for continuous running multi-kilojoule systems operating to at least 20 pps.

  18. Tube bank metal wastage in the Grimethorpe PFBC. [Pressurized fluidized-bed combustor

    SciTech Connect (OSTI)

    Not Available

    1984-02-01

    The 2 m x 2 m PFBC facility at Grimethorpe, England is designed to explore the pressurized fluidized-bed combustion of coal over a wide range of conditions. A significant degree of metal wastage was observed on the fireside surfaces of the tube bank which occurred during 468 coal-burning hours of hot shakedown and hot commissioning testing. This paper described the operating conditions during testing, the erosion of the metal surfaces, and the repair and modifications undertaken. 1 reference, 4 figures, 2 tables.

  19. High pressure synthesis of a new phase of YbAg2: Structure, valence of Yb and properties

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tsvyashchenko, A. V.; Menushenkov, A. P.; Sidorov, V. A.; Petrova, A. E.; Fomicheva, L. N.; Chernysheva, O. V.; Lebed, Yu. B.; Axenov, S. N.; Bud’ko, S. L.; Sun, Liling; et al

    2015-08-05

    The new phase of YbAg2 was obtained using high-pressure and high-temperature reaction. YbAg2 crystallizes in the MgZn2 structure (the space group P63/mmc space group, No 194) with a = 5.68153(3) Å and c = 9.31995(7) Å and the unit cell volume V = 260.54(3) Å3. The XANES analysis showed that the valence state of Yb is +2.8. The low-temperature dependences of the electrical resistivity and magnetic susceptibility can be adequately described by a T2 term that supports the Fermi-liquid picture. Furthermore, the Kadowaki–Woods relation gives a low value of the degeneracy (N = 2).

  20. Surface plasmon dispersion engineering via double-metallic AU/AG layers for nitride light-emitting diodes

    DOE Patents [OSTI]

    Tansu, Nelson; Zhao, Hongping; Zhang, Jing; Liu, Guangyu

    2014-04-01

    A double-metallic deposition process is used whereby adjacent layers of different metals are deposited on a substrate. The surface plasmon frequency of a base layer of a first metal is tuned by the surface plasmon frequency of a second layer of a second metal formed thereon. The amount of tuning is dependent upon the thickness of the metallic layers, and thus tuning can be achieved by varying the thicknesses of one or both of the metallic layers. In a preferred embodiment directed to enhanced LED technology in the green spectrum regime, a double-metallic Au/Ag layer comprising a base layer of gold (Au) followed by a second layer of silver (Ag) formed thereon is deposited on top of InGaN/GaN quantum wells (QWs) on a sapphire/GaN substrate.

  1. High pressure synthesis of a new phase of YbAg2: Structure, valence of Yb and properties

    SciTech Connect (OSTI)

    Tsvyashchenko, A. V.; Menushenkov, A. P.; Sidorov, V. A.; Petrova, A. E.; Fomicheva, L. N.; Chernysheva, O. V.; Lebed, Yu. B.; Axenov, S. N.; Bud’ko, S. L.; Sun, Liling; Zhao, Zhongxian

    2015-08-05

    The new phase of YbAg2 was obtained using high-pressure and high-temperature reaction. YbAg2 crystallizes in the MgZn2 structure (the space group P63/mmc space group, No 194) with a = 5.68153(3) Å and c = 9.31995(7) Å and the unit cell volume V = 260.54(3) Å3. The XANES analysis showed that the valence state of Yb is +2.8. The low-temperature dependences of the electrical resistivity and magnetic susceptibility can be adequately described by a T2 term that supports the Fermi-liquid picture. Furthermore, the Kadowaki–Woods relation gives a low value of the degeneracy (N = 2).

  2. Impacts of increased bioenergy demand on global food markets: an AgMIP economic model intercomparison

    SciTech Connect (OSTI)

    Lotze-Campen, Hermann; von Lampe, Martin; Kyle, G. Page; Fujimori, Shinichiro; Havlik, Petr; van Meijl, Hans; Hasegawa, Tomoko; Popp, Alexander; Schmitz, Christoph; Tabeau, Andrzej; Valin, Hugo; Willenbockel, Dirk; Wise, Marshall A.

    2014-01-01

    Integrated Assessment studies have shown that meeting ambitious greenhouse gas mitigation targets will require substantial amounts of bioenergy as part of the future energy mix. In the course of the Agricultural Model Comparison and Improvement Project (AgMIP), five global agro-economic models were used to analyze a future scenario with global demand for ligno-cellulosic bioenergy rising to about 100 ExaJoule in 2050. From this exercise a tentative conclusion can be drawn that ambitious climate change mitigation need not drive up global food prices much, if the extra land required for bioenergy production is accessible or if the feedstock, e.g. from forests, does not directly compete for agricultural land. Agricultural price effects across models by the year 2050 from high bioenergy demand in an RCP2.6-type scenario appear to be much smaller (+5% average across models) than from direct climate impacts on crop yields in an RCP8.5-type scenario (+25% average across models). However, potential future scarcities of water and nutrients, policy-induced restrictions on agricultural land expansion, as well as potential welfare losses have not been specifically looked at in this exercise.

  3. Study of CNT growth using nanocatalyst Ag precursor by HWC-VHF-PECVD

    SciTech Connect (OSTI)

    Eliyana, Ajeng; Rosikin, Ahmad; Winata, Toto

    2015-04-16

    The study of CNT growth has been done by using silver (Ag) nanocatalyst as a guide precursor on corning glass 7059 substrate. The silver catalyst was prepared by the evaporation method by varying deposition time for 50, 25, and 14 seconds. The silver films were then annealed at temperature of 400C for 4 hours. From Scanning Electron Microscope (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) results the grain sizes are 65?nm, 57?nm, and 33?nm, and also the atomic compositions are 6,06%, 4,52%, and 3,73% for 14, 25 and 50 seconds samples, respectively. The 33?nm samples were then used for CNT growth by using Hot Wire Cell (HWC) Very High Frequency (VHF) Plasma Enhanced Chemical Vapor Deposition (PECVD) at 275 C deposition temperature and pressure of 300 mTorr. The rf power was varied from 8 to 20 watts, with deposition time for 60 minutes. The methane (CH4) 99.999% was used as Carbon sources. Hydrogen gas (H2) was used to etch the oxide layer formed during the pre-deposition process. The diameter and length for the CNT are 125?nm and 1.650 to 2.989?nm respectively.

  4. Electronic structure and conductivity of nanocomposite metal (Au,Ag,Cu,Mo)-containing amorphous carbon films

    SciTech Connect (OSTI)

    Endrino, Jose L.; Horwat, David; Gago, Raul; Andersson, Joakim; Liu, Y.S.; Guo, Jinghua; Anders, Andre

    2008-05-14

    In this work, we study the influence of the incorporation of different metals (Me = Au, Ag, Cu, Mo) on the electronic structure of amorphous carbon (a-C:Me) films. The films were produced at room temperature using a novel pulsed dual-cathode arc deposition technique. Compositional analysis was performed with secondary neutral mass spectroscopy whereas X-ray diffraction was used to identify the formation of metal nanoclusters in the carbon matrix. The metal content incorporated in the nanocomposite films induces a drastic increase in the conductivity, in parallel with a decrease in the band gap corrected from Urbach energy. The electronic structure as a function of the Me content has been monitored by x-ray absorption near edge structure (XANES) at the C K-edge. XANES showed that the C host matrix has a dominant graphitic character and that it is not affected significantly by the incorporation of metal impurities, except for the case of Mo, where the modifications in the lineshape spectra indicated the formation of a carbide phase. Subtle modifications of the spectral lineshape are discussed in terms of nanocomposite formation.

  5. Effect of cooling rate on the microstructure and microhardness of the CuZrAgAl alloy

    SciTech Connect (OSTI)

    Liu, Y.; Blandin, J.J.; Suery, M.; Kapelski, G.

    2012-08-15

    The effect of cooling rate on the microstructure and microhardness of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} (at.%) alloy has been studied. The crystalline phases were characterized by X-ray diffraction, optical microscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy, and identified as AlCu{sub 2}Zr, Cu{sub 10}Zr{sub 7} and CuZr{sub 2}. The solidification sequence was established as following: the Cu{sub 10}Zr{sub 7} phase forms first in the periphery of the rod, then following with AlCu{sub 2}Zr phase in the rod center and finally CuZr{sub 2} crystals in Cu-depleted areas. The effect of crystals on the mechanical properties of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was also estimated through the microhardness. According to the value of microhardness, inhomogeneous structure of the amorphous matrix is more easily formed for the alloy in the low cooling rate (i.e., 9 mm) as compared with the alloy with fully amorphous state in the large cooling rate (i.e., 3 mm). This inhomogeneous structure was attributed to the composition change of amorphous matrix arising from the forming of crystalline phases due to the low cooling rate. - Highlights: Black-Right-Pointing-Pointer The crystalline phases in the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy were identified. Black-Right-Pointing-Pointer The solidification sequence of Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was verified. Black-Right-Pointing-Pointer The softening and hardening of alloy could be observed due to the crystallization.

  6. Enhancement of hole injection and electroluminescence by ordered Ag nanodot array on indium tin oxide anode in organic light emitting diode

    SciTech Connect (OSTI)

    Jung, Mi E-mail: Dockha@kist.re.kr; Mo Yoon, Dang; Kim, Miyoung; Kim, Chulki; Lee, Taikjin; Hun Kim, Jae; Lee, Seok; Woo, Deokha E-mail: Dockha@kist.re.kr; Lim, Si-Hyung

    2014-07-07

    We report the enhancement of hole injection and electroluminescence (EL) in an organic light emitting diode (OLED) with an ordered Ag nanodot array on indium-tin-oxide (ITO) anode. Until now, most researches have focused on the improved performance of OLEDs by plasmonic effects of metal nanoparticles due to the difficulty in fabricating metal nanodot arrays. A well-ordered Ag nanodot array is fabricated on the ITO anode of OLED using the nanoporous alumina as an evaporation mask. The OLED device with Ag nanodot arrays on the ITO anode shows higher current density and EL enhancement than the one without any nano-structure. These results suggest that the Ag nanodot array with the plasmonic effect has potential as one of attractive approaches to enhance the hole injection and EL in the application of the OLEDs.

  7. Efficient enhancement of hydrogen production by Ag/Cu{sub 2}O/ZnO tandem triple-junction photoelectrochemical cell

    SciTech Connect (OSTI)

    Liu, Ying; Ren, Feng Chen, Chao; Liu, Chang; Xing, Zhuo; Liu, Dan; Xiao, Xiangheng; Wu, Wei; Zheng, Xudong; Liu, Yichao; Jiang, Changzhong; Shen, Shaohua; Fu, Yanming

    2015-03-23

    Highly efficient semiconductor photoelectrodes for solar hydrogen production through photocatalytic water splitting are a promising and challenge solution to solve the energy problems. In this work, Ag/Cu{sub 2}O/ZnO tandem triple-junction photoelectrode was designed and prepared. An increase of 11 times of photocurrent is achieved in the Ag/Cu{sub 2}O/ZnO photoelectrode comparing to that of the Cu{sub 2}O film. The high performance of the Ag/Cu{sub 2}O/ZnO film is due to the optimized design of the tandem triple-junction structure, where the localized surface Plasmon resonance of Ag and the hetero-junctions efficiently absorb solar energy, produce, and separate electron-hole pairs in the photocathode.

  8. Raman Spectroscopy of the Reaction of Thin Films of Solid-State Benzene with Vapor-Deposited Ag, Mg, and Al

    SciTech Connect (OSTI)

    Schalnat, Matthew C.; Hawkridge, Adam M.; Pemberton, Jeanne E.

    2011-07-21

    Thin films of solid-state benzene at 30 K were reacted with small quantities of vapor-deposited Ag, Mg, and Al under ultrahigh vacuum, and products were monitored using surface Raman spectroscopy. Although Ag and Mg produce small amounts of metalbenzene adduct products, the resulting Raman spectra are dominated by surface enhancement of the normal benzene modes from metallic nanoparticles suggesting rapid Ag or Mg metallization of the film. In contrast, large quantities of Al adduct products are observed. Vibrational modes of the products in all three systems suggest adducts that are formed through a pathway initiated by an electron transfer reaction. The difference in reactivity between these metals is ascribed to differences in ionization potential of the metal atoms; ionization potential values for Ag and Mg are similar but larger than that for Al. These studies demonstrate the importance of atomic parameters, such as ionization potential, in solid-state metalorganic reaction chemistry.

  9. Ag{sub 3}PO{sub 4}/ZnO: An efficient visible-light-sensitized composite with its application in photocatalytic degradation of Rhodamine B

    SciTech Connect (OSTI)

    Liu, Wei; School of Chemistry and Material Science, Huaibei Normal University, Huaibei 235000 ; Wang, Mingliang; Xu, Chunxiang; Chen, Shifu; Fu, Xianliang

    2013-01-15

    Graphical abstract: The free OH radicals generated in the VB of ZnO play the primary role in the visible-light photocatalytic degradation of RhB in Ag{sub 3}PO{sub 4}/ZnO system. The accumulated electrons in the CB of Ag{sub 3}PO{sub 4} can be transferred to O{sub 2} adsorbed on the surface of the composite semiconductors and H{sub 2}O{sub 2} yields. H{sub 2}O{sub 2} reacts with electrons in succession to produce active OH to some extent. Display Omitted Highlights: ? Efficient visible-light-sensitized Ag{sub 3}PO{sub 4}/ZnO composites were successfully prepared. ? Effect of Ag{sub 3}PO{sub 4} content on the catalytic activity of Ag{sub 3}PO{sub 4}/ZnO is studied in detail. ? Rate constant of RhB degradation over Ag{sub 3}PO{sub 4}(3.0 wt.%)/ZnO is 3 times that of Ag{sub 3}PO{sub 4}. ? The active species in RhB degradation are examined by adding a series of scavengers. ? Visible light degradation mechanism of RhB over Ag{sub 3}PO{sub 4}/ZnO is systematically studied. -- Abstract: The efficient visible-light-sensitized Ag{sub 3}PO{sub 4}/ZnO composites with various weight percents of Ag{sub 3}PO{sub 4} were prepared by a facile ball milling method. The photocatalysts were characterized by XRD, DRS, SEM, EDS, XPS, and BET specific area. The OH radicals produced during the photocatalytic reaction was detected by the TAPL technique. The photocatalytic property of Ag{sub 3}PO{sub 4}/ZnO was evaluated by photocatalytic degradation of Rhodamine B under visible light irradiation. Significantly, the results revealed that the photocatalytic activity of the composites was much higher than that of pure Ag{sub 3}PO{sub 4} and ZnO. The rate constant of RhB degradation over Ag{sub 3}PO{sub 4}(3.0 wt.%)/ZnO is 3 times that of single-phase Ag{sub 3}PO{sub 4}. The optimal percentage of Ag{sub 3}PO{sub 4} in the composite is 3.0 wt.%. It is proposed that the OH radicals produced in the valence band of ZnO play the leading role in the photocatalytic degradation of Rhodamine B by Ag{sub 3}PO{sub 4}/ZnO systems under visible light irradiation.

  10. Properties of nano structured Ag-TiO{sub 2} composite coating on stainless steel using RF sputtering method

    SciTech Connect (OSTI)

    Bakar, S. Abu; Jamuna-Thevi, K.; Abu, N.; Mohd Toff, M. R.

    2012-07-02

    RF Sputtering system is one of the Physical Vapour Deposition (PVD) methods that have been widely used to produce hard coating. This technique is used to deposit thin layers of metallic substrates such as stainless steel (SS). From this process, a good adhesiveness and wear resistance coating can be produced for biomedical applications. In this study, RF sputtering method was used to deposit TiO{sub 2}-Ag composite coatings via various deposition parameters. The parameters are RF power of 350W, gas composition (Ar: O{sub 2}) 50:5 and deposition time at 1, 2, 4 and 6 hours. Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and Raman spectroscopy were used to characterize surface area of coated samples. The formation of nanocrystalline thin film and the surface morphology were examined using SEM. The crystallite size of TiO{sub 2}-Ag composite coatings were estimated between 20-60 nm based on XRD analysis using Scherer equation and SEM evaluation. The Raman and XRD results suggested that the structure of the TiO{sub 2}-Ag consist of anatase and rutile phases. It also showed that the intensity of anatase peaks increased after samples undergone annealing process at 500 Degree-Sign C.

  11. Soft chemical synthesis of Ag{sub 3}SbS{sub 3} with efficient and recyclable visible light photocatalytic properties

    SciTech Connect (OSTI)

    Gusain, Meenakshi; Rawat, Pooja; Nagarajan, Rajamani

    2014-12-15

    Highlights: Highly crystalline Ag{sub 3}SbS{sub 3} synthesized using soft chemical approach. First time report of photocatalytic activity of Ag{sub 3}SbS{sub 3}. Ag{sub 3}SbS{sub 3} degraded the harmful organic dyes rapidly under visible radiation. Pseudo first order kinetics have been followed in these sets of reactions. Up to 90% of Methylene Blue degraded even after 4th cycle of catalyst reuse. Structure of catalyst is intact after reuse. As the catalyst is heavy, its separation after use is quite simple. - Abstract: Application of Ag{sub 3}SbS{sub 3}, obtained by soft chemical approach involving rapid reaction of air stable metalthiourea complexes in ethylene glycol medium, as visible light photocatalyst for the degradation of dye solutions was investigated. Ag{sub 3}SbS{sub 3} was confirmed by high resolution powder X-ray diffraction pattern and its no defined morphology was present in SEM images. From UVvis spectroscopy measurements, optical band gap of 1.77 eV was deduced for Ag{sub 3}SbS{sub 3}. Rapid degradation kinetics and recyclability was exhibited by Ag{sub 3}SbS{sub 3} towards Methylene Blue, Methyl Orange, Malachite Green, and Rhodamine 6G dye solutions under visible radiation. All these processes followed pseudo first order kinetics. High surface area (6.39 m{sup 2}/g), with mesopores (3.81 nm), arising from solvent mediated synthesis of Ag{sub 3}SbS{sub 3} has been correlated to its catalytic activity.

  12. Design, fabrication, and integration testing of the Garden Banks 388 subsea production template

    SciTech Connect (OSTI)

    Ledbetter, W.R.; Smith, D.W.; Pierce, D.M.; Padilla, J.R.

    1995-12-31

    Enserch Exploration`s Garden Banks 388 development has a production scheme based around a floating drilling and production facility and subsea drilling/production template. The Floating Production Facility (FPF) is a converted semisubmersible drilling rig that will drill and produce through a 24-well slot subsea template. This development is located in Block 388 of the Garden Banks area in the Gulf of Mexico approximately 200 miles southwest of New Orleans, Louisiana. The production system is being installed in an area of known oil and gas reserves and will produce to a shallow water platform 54 miles away at Eugene Island 315. The FPF will be permanently moored above the template. The subsea template has been installed in 2190 feet of water and will produce through a 2,000 foot free-standing production riser system to the FPF. The produced fluids are partially separated on the FPF before oil and gas are pumped through the template to export gathering lines that are connected to the shallow water facility. The system designed through-put is 40,000 BOPD of oil and 120 MMSCFD of gas.

  13. Synthesis, characterization and evaluation of the photocatalytic performance of Ag-CdMoO{sub 4} solar light driven plasmonic photocatalyst

    SciTech Connect (OSTI)

    Adhikari, Rajesh; Malla, Shova; Gyawali, Gobinda; Sekino, Tohru; Lee, Soo Wohn

    2013-09-01

    Graphical abstract: - Highlights: Ag-CdMoO{sub 4} solar light driven photocatalyst was successfully synthesized. Photocatalyst exhibited strong absorption in the visible region. Photocatalytic activity was significantly enhanced. Enhanced activity was caused by the SPR effect induced by Ag nanoparticles. - Abstract: Ag-CdMoO{sub 4} plasmonic photocatalyst was synthesized in ethanol/water mixture by photo assisted co-precipitation method at room temperature. As synthesized powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UVVis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and BrunauerEmmettTeller (BET) surface area analyzer. Photocatalytic activity was evaluated by performing the degradation experiment over methylene blue (MB) and indigo carmine (IC) as model dyes under simulated solar light irradiation. The results revealed that the Ag-CdMoO{sub 4} showed the higher photocatalytic performance as compared to CdMoO{sub 4} nanoparticles. Dispersion of Ag nanoparticles over the surface of CdMoO{sub 4} nanoparticles causes the surface plasmon resonance (SPR) and enhances the broad absorption in the entire visible region of the solar spectrum. Hence, dispersion of Ag nanoparticles over CdMoO{sub 4} nanoparticles could be the better alternative to enhance the absorption of visible light by scheelite crystal family for effective photocatalysis.

  14. Selective Hydrogenation of Acetylene in the Presence of Ethylene on K+ -beta-Zeolite Supported Pd and PdAg Catalysts

    SciTech Connect (OSTI)

    Huang,W.; Pyrz, W.; Lobo, R.; Chen, J.

    2007-01-01

    The selective hydrogenation of acetylene in the presence of ethylene has been studied on K+ exchanged {beta}-zeolite supported Pd and PdAg catalysts. Results from batch reactor studies with Fourier transform infrared spectroscopy (FTIR) have shown that the K+-{beta}-zeolite support is more selective than the Al2O3 or Na+-{beta}-zeolite supports toward the hydrogenation of acetylene. The rate and equilibrium constants for Pd/K+-{beta}-zeolite and PdAg/K+-{beta}-zeolite were determined using a Langmuir-Hinshelwood model. The selectivity of the PdAg bimetallic catalyst is twice of that of the Pd catalyst. Results from flow reactor studies show that the PdAg/K+-{beta}-zeolite catalyst has higher selectivity but lower activity toward acetylene hydrogenation than the Pd/K+-{beta}-zeolite catalyst. The selectivity to the undesirable ethane by-product is inhibited on the bimetallic catalyst. Extended X-ray absorption fine structure (EXAFS) studies and transmission electron microscope (TEM) analysis confirm the formation of Pd-Ag bimetallic bonds in the PdAg/K+-{beta}-zeolite catalyst.

  15. Flexible indium zinc oxide/Ag/indium zinc oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics

    SciTech Connect (OSTI)

    Park, Yong-Seok; Kim, Han-Ki

    2010-01-15

    The authors describe the preparation and characteristics of flexible indium zinc oxide (IZO)-Ag-IZO multilayer electrodes grown on flexible polyethersulfone (PES) substrates using a roll-to-roll sputtering system for use in flexible organic photovoltaics. By the continuous roll-to-roll sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, they were able to fabricate a high quality IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 {epsilon}/square, optical transmittance of 87.4%, and figure of merit value of 42.03x10{sup -3} {Omega}{sup -1} on the PES substrate. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the roll-to-roll sputter grown single ITO electrode due to the existence of a ductile Ag layer between the IZO layers and stable amorphous structure of the IZO film. Furthermore, the flexible organic solar cells (OSCs) fabricated on the roll-to-roll sputter grown IZO-Ag-IZO electrode showed higher power efficiency (3.51%) than the OSCs fabricated on the roll-to-roll sputter grown single ITO electrode (2.67%).

  16. Photocatalytic degradation of gaseous toluene over hollow spindle-like ?-Fe{sub 2}O{sub 3} loaded with Ag

    SciTech Connect (OSTI)

    Li, Hong [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China) [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China); Department of Basic, Dalian Naval Academy, Dalian 116018 (China); Zhao, Qidong [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China)] [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China); Li, Xinyong, E-mail: xyli@dlut.edu.cn [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China) [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China); Department of Chemical Engineering, Curtin University, Perth, WA 6845 (Australia); Shi, Yong [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China)] [State Key Laboratory of Fine Chemical, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China); Zhu, Zhengru [Research Center of Hydrology and Engineering, Academy of City and Environment, Liaoning Normal University, Dalian 116029 (China)] [Research Center of Hydrology and Engineering, Academy of City and Environment, Liaoning Normal University, Dalian 116029 (China); Tade, Moses [Department of Chemical Engineering, Curtin University, Perth, WA 6845 (Australia)] [Department of Chemical Engineering, Curtin University, Perth, WA 6845 (Australia); Liu, Shaomin, E-mail: shaomin.liu@curtin.edu.au [Department of Chemical Engineering, Curtin University, Perth, WA 6845 (Australia)] [Department of Chemical Engineering, Curtin University, Perth, WA 6845 (Australia)

    2012-06-15

    Highlights: ? Hollow ?-Fe{sub 2}O{sub 3} spindle-shaped microparticles were prepared for Ag support. ? The hollow ?-Fe{sub 2}O{sub 3} and Ag/?-Fe{sub 2}O{sub 3} materials were used to degrade gaseous toluene. ? Complete degradation of toluene occurred on the Ag/?-Fe{sub 2}O{sub 3} surface. -- Abstract: In this work, hollow spindle-like ?-Fe{sub 2}O{sub 3} nanoparticles were synthesized by a hydrothermal route. The Ag/?-Fe{sub 2}O{sub 3} catalyst was prepared based on the spindle-shaped ?-Fe{sub 2}O{sub 3} with CTAB as the surfactant, which showed excellent photoelectric property and photocatalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction, scanning electronic microscopy, transmission electronic microscopy, energy-dispersive X-ray spectra, and UVVis diffuse reflectance spectroscopy techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage measurement. The photocatalytic performances of the Ag/?-Fe{sub 2}O{sub 3} and ?-Fe{sub 2}O{sub 3} samples were comparatively studied in the degradation of toluene under xenon lamp irradiation by in situ FTIR spectroscopy. Benzaldehyde and benzoic acid species could be observed on the ?-Fe{sub 2}O{sub 3} surface rather than Ag/?-Fe{sub 2}O{sub 3} surface. The results indicate that the Ag/?-Fe{sub 2}O{sub 3} sample exhibited higher photocatalytic efficiency.

  17. Longitudinal Bank for Serum, Plasma and DNA for Detection of Biomarkers

    SciTech Connect (OSTI)

    Ward, David C

    2009-07-20

    With the support of this DOE appropriation, NVCI has established a biorepository for serum, plasma, DNA and urine specimens. Over 2,500 patients have been consented which is over 90% of all new patients seen at NVCI. The specimens have been coded, centrifuged, aliquoted and frozen at -80?C in a rapid manner so that they are all processed in less than 1 hour from the acquisition. There are over 28,000 aliquoted, coded tubes in our inventory. Specimens from 200 control volunteer subjects without any history of cancer also have been banked. The patient specimens are encoded and the demographics and therapeutic treatments are linked to the Oncore software. This computer program catalogues the specimens and provides a rapid conduit between the biorepository and the NVCI electronic medical record.

  18. Longitudinal Bank for Serum, Plasma, and DNA for Detection of Biomarkers

    SciTech Connect (OSTI)

    Vogelzang, Nicolas; Fink, Louis

    2007-11-12

    The discovery of genetic or biochemical markers to discriminate malignant cancers from normal or benign disease states, markers to stage cancer or monitor disease progression and markers that provide an early indication of an individuals response to chemotherapy have become a major research objectives of the oncology community over the past few years. The goal of the project is to create a patient speciment bank of serum, plasma, urine and tissues from approximately 1500 individuals. The collection of samples from individuals on a longitudinal basis provided proteomic and biochemical data to be correlated with clinical endpoints. This greatly enhanced our ability to identify biiomarkers for staging different cancers and to detect patient responsiveness to therapy at an early state in the treatment process.

  19. Structural and magnetic phase transitions in CeCu6-xTx (T = Ag,Pd)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Poudel, Lekhanath N.; De la cruz, Clarina; Payzant, E. Andrew; Koehler, Michael R.; May, Andrew F.; Garlea, Vasile O.; Taylor, Alice E.; Parker, David S.; Cao, Huibo B.; McGuire, Michael A.; et al

    2015-12-15

    The structural and the magnetic properties of CeCu6-xAgx (0 ≤ x ≤ 0.85) and CeCu6-xPdx (0 ≤ x ≤ 0.4) have been studied using neutron diffraction, resonant ultrasound spectroscopy (RUS), x-ray diffraction measurements, and first principles calculations. The structural and magnetic phase diagrams of CeCu6-xAgx and CeCu6-xPdx as a function of Ag/Pd composition are reported. The end member, CeCu6, undergoes a structural phase transition from an orthorhombic (Pnma) to a monoclinic (P21/c) phase at 240 K. In CeCu6-xAgx, the structural phase transition temperature (Ts) decreases linearly with Ag concentration and extrapolates to zero at xS ≈ 0.1. The structural transitionmore » in CeCu6-xPdx remains unperturbed with Pd substitution within the range of our study. The lattice constant b slightly decreases with Ag/Pd doping, whereas a and c increase with an overall increase in the unit cell volume. Both systems, CeCu6-xAgx and CeCu6-xPdx, exhibit a magnetic quantum critical point (QCP), at x ≈ 0.2 and x ≈ 0.05, respectively. Near the QCP, long range antiferromagnetic ordering takes place at an incommensurate wave vector (δ1 0 δ2), where δ1 ~ 0.62, δ2 ~ 0.25, x = 0.125 for CeCu6-xPdx and δ1 ~ 0.64, δ2 ~ 0.3, x = 0.3 for CeCu6-xAgx. As a result, the magnetic structure consists of an amplitude modulation of the Ce moments which are aligned along the c axis of the orthorhombic unit cell.« less

  20. Electronic structure, transport, and phonons of SrAgChF (Ch = S,Se,Te): Bulk superlattice thermoelectrics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gudelli, Vijay Kumar; Kanchana, V.; Vaitheeswaran, G.; Singh, David J.; Svane, Axel; Christensen, Niels Egede; Mahanti, Subhendra D.

    2015-07-15

    Here, we report calculations of the electronic structure, vibrational properties, and transport for the p-type semiconductors, SrAgChF (Ch = S, Se, and Te). We find soft phonons with low frequency optical branches intersecting the acoustic modes below 50 cm–1, indicative of a material with low thermal conductivity. The bands at and near the valence-band maxima are highly two-dimensional, which leads to high thermopowers even at high carrier concentrations, which is a combination that suggests good thermoelectric performance. These materials may be regarded as bulk realizations of superlattice thermoelectrics.

  1. Self-assembled two-dimensional nanoporous molecular arrays and photoinduced polymerization of 4-bromo-4?-hydroxybiphenyl on Ag(111)

    SciTech Connect (OSTI)

    Shen, Qian; He, Jing Hui; Zhang, Jia Lin; Wu, Kai; Xu, Guo Qin; Wee, Andrew Thye Shen; Chen, Wei

    2015-03-14

    Self-assembled two-dimensional molecular arrays and photoinduced polymerization of 4-bromo-4?-hydroxybiphenyl on Ag(111) were studied using low-temperature scanning tunneling microscopy combined with density functional theory calculations. Square-like self-assembled structures of 4-bromo-4?-hydroxybiphenyl stabilized by intermolecular hydrogen and halogen bonds were transformed into hexagonal nanopores of biphenyl biradicals by 266 nm UV laser irradiation at 80 K. The biradicals further coupled to each other and formed covalently linked polyphenylene polymer chains at room temperature.

  2. Ag@Au concave cuboctahedra: A unique probe for monitoring Au-catalyzed reduction and oxidation reactions by surface-enhanced Raman spectroscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Jiawei; Winget, Sarah A.; Wu, Yiren; Su, Dong; Sun, Xiaojun; Xie, Zhao -Xiong; Qin, Dong

    2016-01-26

    In this paper, we report a facile synthesis of Ag@Au concave cuboctahedra by titrating aqueous HAuCl4 into a suspension of Ag cuboctahedra in the presence of ascorbic acid (AA), NaOH, and poly(vinylpyrrolidone) (PVP) at room temperature. Initially, the Au atoms derived from the reduction of Au3+ by AA are conformally deposited on the entire surface of a Ag cuboctahedron. Upon the formation of a complete Au shell, however, the subsequently formed Au atoms are preferentially deposited onto the Au{100} facets, resulting in the formation of a Ag@Au cuboctahedron with concave structures at the sites of {111} facets. The concave cuboctahedramore » embrace excellent SERS activity that is more than 70-fold stronger than that of the original Ag cuboctahedra at an excitation wavelength of 785 nm. The concave cuboctahedra also exhibit remarkable stability in the presence of an oxidant such as H2O2 because of the protection by a complete Au shell. These two unique attributes enable in-situ SERS monitoring of the reduction of 4-nitrothiophenol (4-NTP) to 4-aminothiophenol (4-ATP) by NaBH4 through a 4,4'-dimercaptoazobenzene (trans-DMAB) intermediate and the subsequent oxidation of 4-ATP back to trans-DMAB upon the introduction of H2O2.« less

  3. Adsorption Isotherms for Xenon and Krypton using INL HZ-PAN and AgZ-PAN Sorbents

    SciTech Connect (OSTI)

    Troy G. Garn; Mitchell Greenhalgh; Veronica J. Rutledge; Jack D. Law

    2014-08-01

    The generation of adsorption isotherms compliments the scale-up of off-gas processes used to control the emission of encapsulated radioactive volatile fission and activation products released during Used Nuclear Fuel (UNF) reprocessing activities. A series of experiments were conducted to obtain capacity results for varying Kr and Xe gas concentrations using HZ-PAN and AgZ-PAN engineered form sorbents. Gas compositions for Kr ranged from 150-40,000 ppmv and 250-5020 ppmv for Xe in a helium balance. The experiments were all performed at 220 K at a flowrate of 50 sccm. Acquired capacities were then respectively fit to the Langmuir equation using the Langmuir linear regression method to obtain the equilibrium parameters Qmax and Keq. Generated experimental adsorption isotherms were then plotted with the Langmuir predicted isotherms to illustrate agreement between the two. The Langmuir parameters were provided for input into the OSPREY model to predict breakthrough of single component adsorption of Kr and Xe on HZ-PAN and AgZ-PAN sorbents at the experimental conditions tested. Kr and Xe capacities resulting from model breakthrough predictions were then compared to experimental capacities for model validation.

  4. Performance of LiAlloy/Ag(2)CrO(4) Couples in Molten CsBr-LiBr-KBr Eutectic

    SciTech Connect (OSTI)

    GUIDOTTI,RONALD A.; REINHARDT,FREDERICK W.

    1999-10-18

    The performance of Li-alloy/CsBr-LiBr-KBr/Ag{sub 2}CrO{sub 4} systems was studied over a temperature range of 250 C to 300 C, for possible use as a power source for geothermal borehole applications. Single cells were discharged at current densities of 15.8 and 32.6 mA/cm{sup 2} using Li-Si and Li-Al anodes. When tested in 5-cell batteries, the Li-Si/CsBr-LiBr-KBr/Ag{sub 2}CrO{sub 4} system exhibited thermal runaway. Thermal analytical tests showed that the Ag{sub 2}CrO{sub 4} cathode reacted exothermically with the electrolyte on activation. Consequently, this system would not be practical for the envisioned geothermal borehole applications.

  5. Banks Lake Fishery Evaluation Project Annual Report : Fiscal Year 2008 (March 1, 2008 to February 1, 2009).

    SciTech Connect (OSTI)

    Polacek, Matt

    2009-07-15

    The Washington Department of Fish and Wildlife implemented the Banks Lake Fishery Evaluation Project (BLFEP) in September 2001 with funds from the Bonneville Power Administration, and continued project tasks in 2008. The objective was to evaluate factors that could limit kokanee in Banks Lake, including water quality, prey availability, harvest, and acute predation during hatchery releases. Water quality parameters were collected twice monthly from March through November. Banks Lake water temperatures began to increase in May and stratification was apparent by July. By late August, the thermocline had dropped to 15 meters deep, with temperatures of 21-23 C in the epilimnion and 16-19 C in the hypolimnion. Dissolved oxygen levels were generally above 8 mg/L until August when they dropped near or below 5 mg/L deeper than 20-meters. Secchi depths ranged from 3.2 to 6.2 meters and varied spatially and temporally. Daphnia and copepod densities were the highest in May and June, reaching densities of 26 copepods/liter and 9 Daphnia/liter. Fish surveys were conducted in July and October 2008 using boat electrofishing, gill netting, and hydroacoustic surveys. Lake whitefish (71%) and yellow perch (16%) dominated the limnetic fish assemblage in the summer, while lake whitefish (46%) and walleye (22%) were the most abundant in gill net catch during the fall survey. Piscivore diets switched from crayfish prior to the release of rainbow trout to crayfish and rainbow trout following the release. The highest angling pressure occurred in May, when anglers were primarily targeting walleye and smallmouth bass. Boat anglers utilized Steamboat State Park more frequently than any other boat ramp on Banks Lake. Shore anglers used the rock jetty at Coulee City Park 45% of the time, with highest use occurring from November through April. Ice fishing occurred in January and February at the south end of the lake. An estimated total of 4,397 smallmouth bass, 11,106 walleye, 371 rainbow trout, and 509 yellow perch were harvested from Banks Lake in 2008. No kokanee were reported in the creel; however, local reports indicated that anglers were targeting and catching kokanee. The economic benefit of the Banks Lake fishery was estimated at $2,288,005 during 2008. Abundance estimates from the hydroacoustic survey in July were 514,435 lake whitefish and 10,662 kokanee, with an overall abundance estimate of 626,061 limnetic fish greater than 100 mm. When comparing spring fry, fall fingerling and yearling net pen release strategies of kokanee, 95% were of hatchery origin, with the highest recaptures coming from the fall fingerling release group.

  6. The crystal and electronic structures of the Li{sub 2-x}Ag{sub 1+x}In{sub 3} (x=0.05) indide

    SciTech Connect (OSTI)

    Chumak, Ihor; Pavlyuk, Volodymyr; Pauly, Hermann; Ehrenberg, Helmut

    2013-01-15

    The crystal structure of Li{sub 2-x}Ag{sub 1+x}In{sub 3} (x=0.05) has been determined on a single crystal synthesized from the elements in a tantalum crucible. The compound crystallizes in orthorhombic space group Pmma (a=9.325 (3) A, b=3.198 (1) A, c=8.043 (3) A at 296 K) with 12 atoms per unit cell and represents a new structure type. The structure of Li{sub 2-x}Ag{sub 1+x}In{sub 3} is closely related to the LaCoAl{sub 4} structure and belongs to the structural family, the representative members of which may be derived from the hexagonal AlB{sub 2} structure type by a combination of internal deformation and substitution. The strong In-In interaction and close to zero electrons concentration around Li and Ag atoms, calculated by LTMO, allow to suggest high mobility of lithium atoms located within the channels formed by the strongly waved [-In-In-] polyanionic chains. - Graphical abstract: The crystal structure of Li{sub 2-x}Ag{sub 1+x}In{sub 3} (x=0.05) indide. Highlights: Black-Right-Pointing-Pointer The crystal structure of Li{sub 2-x}Ag{sub 1+x}In{sub 3} has been determined on a single crystal. Black-Right-Pointing-Pointer A detailed crystal chemical analysis of Li{sub 2-x}Ag{sub 1+x}In{sub 3} was performed. Black-Right-Pointing-Pointer The electronic structure of the title compound was calculated.

  7. Green Synthesis of Ag and Pd Nanospheres, Nanowires, and Nanorods Using VitaminB2: Catalytic Polymerisation of Aniline and Pyrrole

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nadagouda, Mallikarjuna N.; Varma, Rajender S.

    2008-01-01

    For the first time, we report green chemistry approach using vitaminB2in the synthesis of silver (Ag) and palladium (Pd), nanospheres, nanowires, and nanorods at room temperature without using any harmful reducing agents, such as sodium borohydride (NaBH4) or hydroxylamine hydrochloride and any special capping or dispersing agent. VitaminB2was used as reducing agent as well as capping agent due to its high-water solubility, biodegradability, and low-toxicity compared with other reducing agents. The average particle size of nanoprticle was found to be Ag (average size 6.10.1?nm) and Pd (average size 4.10.1?nm) nanoparticles in ethylene glycol and Agmore(average size 5.90.1?nm, and average size 6.10.1) nanoparticles in acetic acid and NMP, respectively. The formation of noble multiple shape nanostructures and their self assembly were dependent on the solvent employed for the preparation. When water was used as solvent media, Ag and Pd nanoparticles started to self-assemble into rod-like structures and in isopropanol Ag and Pd nanoparticles yielded wire-like structures with a thickness in the range of 10 to 20?nm and several hundred microns in length. In acetone and acetonitrile medium, the Ag and Pd nanoparticles are self-assembled into a regular pattern making nanorod structures with thicknesses ranging from 100 to 200?nm and lengths of a few microns. The so-synthesized nanostructures were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and UV spectroscopy. The ensuing Ag and Pd nanoparticles catalyzed the reactions of aniline and pyrrole to generate polyaniline and polypyrrole nanofibers and may find various technological and biological applications. This single-step greener approach is general and can be extended to other noble metals and transition metal oxides.less

  8. Complete Phase I Tests As Described in the Multi-lab Test Plan for the Evaluation of CH3I Adsorption on AgZ

    SciTech Connect (OSTI)

    Bruffey, S. H.; Jubin, R. T.

    2014-09-30

    Silver-exchanged mordenite (AgZ) has been identified as a potential sorbent for iodine present in the off-gas streams of a used nuclear fuel reprocessing facility. In such a facility, both elemental and organic forms of iodine are released from the dissolver in gaseous form. These species of iodine must be captured with high efficiency for a facility to avoid radioactive iodine release above regulatory limits in the gaseous effluent of the plant. Studies completed at Idaho National Laboratory (INL) examined the adsorption of organic iodine in the form of CH3I by AgZ. Upon breakthrough of the feed gas through the sorbent bed, elemental iodine was observed in the effluent stream, despite the fact that the only source of iodine in the system was the CH3I in the feed gas.1 This behavior does not appear to have been reported previously nor has it been independently confirmed. Thus, as a result of these prior studies, multiple knowledge gaps relating to the adsorption of CH3I by AgZ were identified, and a multi-lab test plan, including Oak Ridge National Laboratory (ORNL), INL, Pacific Northwest National Laboratory (PNNL), and Sandia National Laboratories, was formulated to address each in a systematic way.2 For this report, the scope of work for ORNL was further narrowed to three thin-bed experiments that would characterize CH3I adsorption onto AgZ in the presence of water, NO, and NO2. Completion of these three-thin bed experiments demonstrated that organic iodine in the form of CH3I was adsorbed by reduced silver mordenite (Ag0Z) to a 50% higher loading than that of I2 when adsorbed from a dry air stream. Adsorption curves suggest different adsorption mechanisms for I2 and CH3I. In the presence of NO and NO2 gas, the loading of CH3I onto Ag0Z is suppressed and may be reversible. Further, the presence of NO and NO2 gas appears to oxidize CH3I to I2; this is indicated by an adsorption curve similar to that of I2 on Ag0Z. Finally, the loss of organic iodine loading capacity by Ag0Z in the presence of NOx is unaffected by the addition of water vapor to the gas stream; no marked additional loss in capacity or retention was observed.

  9. Structural and magnetic phase transitions in CeCu6-xTx (T = Ag,Pd)

    SciTech Connect (OSTI)

    Poudel, Lekhanath N.; De la cruz, Clarina; Payzant, E. Andrew; Koehler, Michael R.; May, Andrew F.; Garlea, Vasile O.; Taylor, Alice E.; Parker, David S.; Cao, Huibo B.; McGuire, Michael A.; Tian, Wei; Matsuda, Masaaki; Jeen, Hyoung Jeen; Lee, Ho Nyung; Hong, Tao; Calder, Stuart A.; Lumsden, Mark D.; Zhou, Haidong; Keppens, Veerle; Mandrus, D.; Christianson, Andrew D.

    2015-12-15

    The structural and the magnetic properties of CeCu6-xAgx (0 ≤ x ≤ 0.85) and CeCu6-xPdx (0 ≤ x ≤ 0.4) have been studied using neutron diffraction, resonant ultrasound spectroscopy (RUS), x-ray diffraction measurements, and first principles calculations. The structural and magnetic phase diagrams of CeCu6-xAgx and CeCu6-xPdx as a function of Ag/Pd composition are reported. The end member, CeCu6, undergoes a structural phase transition from an orthorhombic (Pnma) to a monoclinic (P21/c) phase at 240 K. In CeCu6-xAgx, the structural phase transition temperature (Ts) decreases linearly with Ag concentration and extrapolates to zero at xS ≈ 0.1. The structural transition in CeCu6-xPdx remains unperturbed with Pd substitution within the range of our study. The lattice constant b slightly decreases with Ag/Pd doping, whereas a and c increase with an overall increase in the unit cell volume. Both systems, CeCu6-xAgx and CeCu6-xPdx, exhibit a magnetic quantum critical point (QCP), at x ≈ 0.2 and x ≈ 0.05, respectively. Near the QCP, long range antiferromagnetic ordering takes place at an incommensurate wave vector (δ1 0 δ2), where δ1 ~ 0.62, δ2 ~ 0.25, x = 0.125 for CeCu6-xPdx and δ1 ~ 0.64, δ2 ~ 0.3, x = 0.3 for CeCu6-xAgx. As a result, the magnetic structure consists of an amplitude modulation of the Ce moments which are aligned along the c axis of the orthorhombic unit cell.

  10. Milestone Report - M4FT-15OR0312026 - Complete NO and NO2 aging of AgZ

    SciTech Connect (OSTI)

    Bruffey, Stephanie H.; Patton, Kaara K.; Walker, Jr, Joseph Franklin; Jubin, Robert Thomas

    2015-03-31

    In an off-gas system within a nuclear fuel reprocessing plant, any capture material will be exposed to a gas stream for months at a time. This gas stream may be at elevated temperature and could contain water, NOx gas, or a variety of other constituents that comprise the off-gas stream. For this reason, it is important to understand the effects of long-term exposure, or aging, on proposed capture materials. One material under consideration is silver-exchanged mordenite (AgZ). The aim of this study was to determine the effect of extended exposure at 150C to an air stream containing NO on the iodine capture capacity of the hydrogen reduced form of AgZ designated as Ag0Z. The study was originally also intended to expand on the static NO2 aging studies by exposing Ag0Z to a flowing stream of NO2 for an extended period of time, but those tests were delayed due to NO2 production schedules by the gas vendor. Unreduced silver mordenite has a loading capacity of approximately 25 mg I/g AgZ and that capacity is increased to 100 mg I/g Ag0Z upon reduction. It appears that extended exposure of AgZ to 1% NO at 150C may not only neutralize the increased capacity gained by reduction, but perhaps degrade the sorbent even further. Loss of 80% of sorbent capacity and surface area was observed after 8 weeks of exposure to a 1% NO stream at 150C. Investigations continue into the effects of aging by off-gas components on iodine sorbents. Future work will age silver mordenite with streams containing NO2. As the simulated off-gas streams become more complex and more corrosive, the ability of AgZ to withstand conditions present in off-gas streams will be more fully known.

  11. Stored Guthrie cards as DNA [open quotes]Banks[close quotes

    SciTech Connect (OSTI)

    McEwen, J.E.; Reilly, P.R. )

    1994-07-01

    Recently there has been much discussion about the possibility of using dried blood spots on Guthrie cards as a source of DNA for research or testing purposes. The collections of Guthrie cards stored by state newborn-screening laboratories can thus be viewed as inchoate [open quotes]DNA banks[close quotes]. This has generated concern among some persons who are interested in preserving the privacy of medical records. This study examines the policies of state newborn-screening laboratories in the United States, regarding their retention of Guthrie cards and the degree to which they permit the sharing of those cards with various third parties. The authors found that although most laboratories retain their cards, if at all, for only a short time, a growing number plan to keep them for an extended period-and, in several cases, indefinitely. They also found that although most laboratories would decline to release individually identifiable blood spots from the cards to third parties without a written release or other explicit authorization, a large number would at least consider sharing anonymous cards for research purposes. 10 refs., 2 tabs.

  12. Longwall data bank. Semiannual project report, May 28-November 28, 1981

    SciTech Connect (OSTI)

    Not Available

    1981-12-01

    This is the first semiannual report on Contract No. DE-AC01-81FE00080 entitled Longwall Data Bank. The objectives of the program are to compile and transfer to the coal industry comprehensive longwall operational data representing 95 percent of the US longwall installations and to provide abstracts of domestic and foreign literature published since 1975 related to longwall production, productivity, and dust control. The number of longwall faces operating in the US is steadily increasing, but their full production potential has not been achieved due to problems such as respirable-dust control, excessive move time, roof control, etc. Generally, longwall operators are not knowledgeable of operational data for longwall operations other than their own, nor of results from current longwall research. Therefore, the purpose of this program is to establish more effective technology-transfer procedures. The literature search was completed, except for an ongoing review of weekly abstract publications. Working cards were completed for the comprehensive index file for all longwall publications of interest; abstracts were prepared for selected longwall publications. Revised questionnaire forms, with information from the original questionnaires, were forwarded for updating to nearly all companies presently in the questionnaire file. Selected operational data were tabulated and compared.

  13. Biological Macromolecular Structures Data from the RCSB Protein Data Bank (RCSB PDB)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Research Collaboratory for Structural Bioinformatics (RCSB) is a non-profit consortium that works to improve understanding of the function of biological systems through the study of the 3-D structure of biological macromolecules. The RCSB PDB is one of three sites serving as deposition, data processing, and distribution sites of the Protein Data Bank Archive. Each site provides its own view of the primary data, thus providing a variety of tools and resources for the global community. RCSB is also the official keeper for the PDB archive, with sole access authority to the PDB archive directory structure and contents. The RCSB PDB Information Portal for Biological Macromolecular Structures offers online tools for search and retrieval, for visualizing structures, for depositing, validating, or downloading data, news and highlights, a discussion forum, and links to other areas of related research. The PDB archive is a repository of atomic coordinates and other information describing proteins and other important biological macromolecules. Structural biologists use methods such as X-ray crystallography, NMR spectroscopy, and cryo-electron microscopy to determine the location of each atom relative to each other in the molecule. They then deposit this information, which is then annotated and publicly released into the archive by the wwPDB. Results can be viewed as 3-D images or models.

  14. Associations of Pd, U and Ag in the SiC layer of neutron-irradiated TRISO fuel

    SciTech Connect (OSTI)

    Lillo, Thomas; Rooyen, Isabella Van

    2015-05-01

    Knowledge of the associations and composition of fission products in the neutron irradiated SiC layer of high-temperature gas reactor TRISO fuel is important to the understanding of various aspects of fuel performance that presently are not well understood. Recently, advanced characterization techniques have been used to examine fuel particles from the Idaho National Laboratorys AGR-1 experiment. Nano-sized Ag and Pd precipitates were previously identified in grain boundaries and triple points in the SiC layer of irradiated TRISO nuclear fuel. Continuation of this initial research is reported in this paper and consists of the characterization of a relatively large number of nano-sized precipitates in three areas of the SiC layer of a single irradiated TRISO nuclear fuel particle using standardless EDS analysis on focused ion beam-prepared transmission electron microscopy samples. Composition and distribution analyses of these precipitates, which were located on grain boundaries, triple junctions and intragranular precipitates, revealed low levels, generally <10 atomic %, of palladium, silver and/or uranium with palladium being the most common element found. Palladium by itself, or associated with either silver or uranium, was found throughout the SiC layer. A small number of precipitates on grain boundaries and triple junctions were found to contain only silver or silver in association with palladium while uranium was always associated with palladium but never found by itself or in association with silver. Intergranular precipitates containing uranium were found to have migrated ~23 ?m along a radial direction through the 35 ?m thick SiC coating during the AGR-1 experiment while silver-containing intergranular precipitates were found at depths up to ~24 ?m in the SiC layer. Also, Pd-rich, nano-precipitates (~10 nm in diameter), without evidence for the presence of either Ag or U, were revealed in intragranular regions throughout the SiC layer. Because not all grain boundaries and triple junctions contained precipitates with fission products and/or uranium, along with the differences in migration behavior between Pd, Ag and U, it was concluded that crystallographic grain boundary and triple junction parameters likely influence migration behavior.

  15. Ab initio study of MXe{sub n}{sup +} (M=Cu, Ag, and Au; n=1,2)

    SciTech Connect (OSTI)

    Li Xinying; Cao Xue

    2008-02-15

    The equilibrium geometries, vibrational frequencies, dissociation energies, and populations of the title species were studied at Hartree-Fock (HF), second-order Moeller-Plesset (MP2), and coupled-cluster singles-doubles (triples) [CCSD(T)] levels. The electron correlation effects and relativistic effects on the geometry and stability were investigated at the CCSD(T) level. Both effects stabilize title species. The populations analyses show that M-Xe bonding is dominated by electrostatic interactions and the best theoretical estimate of the dissociation energies are 1.104 and 2.260 eV for AuXe{sup +} and AuXe{sub 2}{sup +}, respectively. The Cu and Ag are weakly bonded to Xe compared to Au.

  16. Second-harmonic generation of TEA CO2 10. 6-micrometer laser light in AgGaS2 crystals

    SciTech Connect (OSTI)

    Bangmin, Z.; Dinghua, W.

    1991-05-03

    Characteristics of AgGaS2 crystal for frequency doubling of TEA CO2 10.6 micrometer laser light were investigated. When the crystal was 4.3mm long, the maximum conversion frequency was 0.122 percent. In recent years, much progress was made in expanding the range of laser wavebands by utilizing the nonlinear effects. In the medium-infrared waveband, the CO2 laser is a relatively ideal light source and can output tens of laser spectral lines within the range 8.7 to 11.8 micrometers. With double frequency, tunable output can be obtained within the range 4.3 to 5.9 micrometers. Since the advent of CO2 lasers, researchers have conducted numerous research tasks in this area. However, since it is relatively difficult to obtain high-quality and large infrared nonlinear optical crystals, such work still remains at the laboratory research stage without practical applications.

  17. The effect of strain induced by Ag underlayer on saturation magnetization of partially ordered Fe{sub 16}N{sub 2} thin films

    SciTech Connect (OSTI)

    Yang, Meiyin; Department of Electrical and Computer Engineering, The Center for Micromagnetics and Information Technologies , University of Minnesota, 200 Union St SE, Minneapolis, Minnesota 55455 ; Allard, Lawrence F.; Ji, Nian; Zhang, Xiaowei; Wang, Jian-Ping; Yu, Guang-Hua

    2013-12-09

    Partially ordered Fe-N thin films were grown by a facing target sputtering process on the surface of a (001) Ag underlayer on MgO substrates. It was confirmed by x-ray diffraction that the Ag layer enlarged the in-plane lattice of the Fe-N thin films. Domains of the ordered α″-Fe{sub 16}N{sub 2} phase within an epitaxial (001) α′-Fe{sub x}N phase were identified by electron diffraction and high-resolution aberration-corrected scanning transmission electron microscopy (STEM) methods. STEM dark-field and bright-field images showed the fully ordered structure of the α″-Fe{sub 16}N{sub 2} at the atomic column level. High saturation magnetization(Ms) of 1890 emu/cc was obtained for α″-Fe{sub 16}N{sub 2} on the Ag underlayer, while only 1500 emu/cc was measured for Fe-N on the Fe underlayer. The results are likely due to a tensile strain induced in the α″-Fe{sub 16}N{sub 2} phase by the Ag structure at the interface.

  18. Interaction transfer of silicon atoms forming Co silicide for Co/√(3)×√(3)R30°-Ag/Si(111) and related magnetic properties

    SciTech Connect (OSTI)

    Chang, Cheng-Hsun-Tony; Fu, Tsu-Yi; Tsay, Jyh-Shen

    2015-05-07

    Combined scanning tunneling microscopy, Auger electron spectroscopy, and surface magneto-optic Kerr effect studies were employed to study the microscopic structures and magnetic properties for ultrathin Co/√(3)×√(3)R30°-Ag/Si(111). As the annealing temperature increases, the upward diffusion of Si atoms and formation of Co silicides occurs at temperature above 400 K. Below 600 K, the √(3)×√(3)R30°-Ag/Si(111) surface structure persists. We propose an interaction transferring mechanism of Si atoms across the √(3)×√(3)R30°-Ag layer. The upward transferred Si atoms react with Co atoms to form Co silicide. The step height across the edge of the island, a separation of 0.75 nm from the analysis of the 2 × 2 structure, and the calculations of the normalized Auger signal serve as strong evidences for the formation of CoSi{sub 2} at the interface. The interaction transferring mechanism for Si atoms enhances the possibility of interactions between Co and Si atoms. The smoothness of the surface is advantage for that the easy axis of magnetization for Co/√(3)×√(3)R30°-Ag/Si(111) is in the surface plane. This provides a possible way of growing flat magnetic layers on silicon substrate with controllable silicide formation and shows potential applications in spintronics devices.

  19. Structural and optical properties of Ag-doped copper oxide thin films on polyethylene napthalate substrate prepared by low temperature microwave annealing

    SciTech Connect (OSTI)

    Das, Sayantan; Alford, T. L.

    2013-06-28

    Silver doped cupric oxide thin films are prepared on polyethylene naphthalate (flexible polymer) substrates. Thin films Ag-doped CuO are deposited on the substrate by co-sputtering followed by microwave assisted oxidation of the metal films. The low temperature tolerance of the polymer substrates led to the search for innovative low temperature processing techniques. Cupric oxide is a p-type semiconductor with an indirect band gap and is used as selective absorption layer solar cells. X-ray diffraction identifies the CuO phases. Rutherford backscattering spectrometry measurements confirm the stoichiometry of each copper oxide formed. The surface morphology is determined by atomic force microscopy. The microstructural properties such as crystallite size and the microstrain for (-111) and (111) planes are calculated and discussed. Incorporation of Ag led to the lowering of band gap in CuO. Consequently, it is determined that Ag addition has a strong effect on the structural, morphological, surface, and optical properties of CuO grown on flexible substrates by microwave annealing. Tauc's plot is used to determine the optical band gap of CuO and Ag doped CuO films. The values of the indirect and direct band gap for CuO are found to be 2.02 eV and 3.19 eV, respectively.

  20. Multi-component testing using HZ-PAN and AgZ-PAN Sorbents for OSPREY Model validation

    SciTech Connect (OSTI)

    Garn, Troy G.; Greenhalgh, Mitchell; Lyon, Kevin L.; Law, Jack D.

    2015-04-01

    In efforts to further develop the capability of the Off-gas SeParation and RecoverY (OSPREY) model, multi-component tests were completed using both HZ-PAN and AgZ-PAN sorbents. The primary purpose of this effort was to obtain multi-component xenon and krypton capacities for comparison to future OSPREY predicted multi-component capacities using previously acquired Langmuir equilibrium parameters determined from single component isotherms. Experimental capacities were determined for each sorbent using two feed gas compositions of 1000 ppmv xenon and 150 ppmv krypton in either a helium or air balance. Test temperatures were consistently held at 220 K and the gas flowrate was 50 sccm. Capacities were calculated from breakthrough curves using TableCurve 2D software by Jandel Scientific. The HZ-PAN sorbent was tested in the custom designed cryostat while the AgZ-PAN was tested in a newly installed cooling apparatus. Previous modeling validation efforts indicated the OSPREY model can be used to effectively predict single component xenon and krypton capacities for both engineered form sorbents. Results indicated good agreement with the experimental and predicted capacity values for both krypton and xenon on the sorbents. Overall, the model predicted slightly elevated capacities for both gases which can be partially attributed to the estimation of the parameters and the uncertainty associated with the experimental measurements. Currently, OSPREY is configured such that one species adsorbs and one does not (i.e. krypton in helium). Modification of OSPREY code is currently being performed to incorporate multiple adsorbing species and non-ideal interactions of gas phase species with the sorbent and adsorbed phases. Once these modifications are complete, the sorbent capacities determined in the present work will be used to validate OSPREY multicomponent adsorption predictions.

  1. The selective catalytic reduction of NOx over Ag/Al2O3 with isobutanol as the reductant

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Brookshear, Daniel William; Pihl, Josh A.; Toops, Todd J.; West, Brian H.; Prikhodko, Vitaly Y.

    2016-02-13

    Here, this study investigates the potential of isobutanol (iBuOH) as a reductant for the selective catalytic reduction (SCR) of NOx over 2 wt% Ag/Al2O3 between 150 and 550 °C and gas hourly space velocities (GHSV) between 10,000 and 35,000 h-1. The feed gas consists of 500 ppm NO, 5% H2O, 10% O2, and 375-1500 ppm iBuOH (C1:N ratios of 3-12); additionally, blends of 24 and 48% iBuOH in gasoline are evaluated. Over 90% NOx conversion is achieved between 300 and 400 C using pure iBuOH, including a 40% peak selectivity towards NH3 that could be utilized in a dual HC/NH3more » SCR configuration. The iBuOH/gasoline blends are only able to achieve greater than 90% NOx conversion when operated at a GHSV of 10,000 h-1 and employing a C1:N ratio of 12. Iso-butyraldehyde and NO2 appear to function as intermediates in the iBuOH-SCR mechanism, which mirrors the mechanism observed for EtOH-SCR. In general, the performance of iBuOH in the SCR of NOx over a Ag/Al2O3 catalyst is comparable with that of EtOH, although EtOH/gasoline blends display higher NOx reduction than iBuOH/gasoline blends. The key parameter in employing alcohols in SCR appears to be the C-OH:N ratio rather than the C1:N ratio.« less

  2. Ground water flow velocity in the bank of the Columbia River, Hanford, Washington

    SciTech Connect (OSTI)

    Ballard, S.

    1995-12-01

    To properly characterize the transport of contaminants from the sediments beneath the Hanford Site into the Columbia River, a suite of In Situ Permeable Flow Sensors was deployed to accurately characterize the hydrologic regime in the banks of the river. The three dimensional flow velocity was recorded on an hourly basis from mid May to mid July, 1994 and for one week in September. The first data collection interval coincided with the seasonal high water level in the river while the second interval reflected conditions during relatively low seasonal river stage. Two flow sensors located approximately 50 feet from the river recorded flow directions which correlated very well with river stage, both on seasonal and diurnal time scales. During time intervals characterized by falling river stage, the flow sensors recorded flow toward the river while flow away from the river was recorded during times of rising river stage. The flow sensor near the river in the Hanford Formation recorded a component of flow oriented vertically downward, probably reflecting the details of the hydrostratigraphy in close proximity to the probe. The flow sensor near the river in the Ringold Formation recorded an upward component of flow which dominated the horizontal components most of the time. The upward flow in the Ringold probably reflects regional groundwater flow into the river. The magnitudes of the flow velocities recorded by the flow sensors were lower than expected, probably as a result of drilling induced disturbance of the hydraulic properties of the sediments around the probes. The probes were installed with resonant sonic drilling which may have compacted the sediments immediately surrounding the probes, thereby reducing the hydraulic conductivity adjacent to the probes and diverting the groundwater flow away from the sensors.

  3. Long-term monitoring of reef corals at the Flower Garden Banks (northwest Gulf of Mexico): Reef coral population changes and historical incorporation of barium in Montastrea annularis

    SciTech Connect (OSTI)

    Deslarzes, K.J.P.

    1992-01-01

    Reef coral populations were monitored from 1988 to 1991 at the Flower Garden Banks located in the northwestern Gulf of Mexico. The status of reef coral populations, and natural or man-made factors potentially affecting their well-being were determined. Man-made chronic disturbances are degrading coral reef resources on a global scale. Yet, the Flower Garden coral reefs seem to have been sheltered from the effects of regional stresses generated by population growth and increased industrial activity. Since 1974, reef coral population levels have remained unchanged in the Montastrea-Diploria Zones at the Flower Garden Banks. Live coral cover ranges between 46 and 46.5%. Montastrea annularis and Diploria strigosa comprise 80% of the coral cover on either bank. The remainder of the cover is mostly shared by eight other taxa. Coral taxa appear to be more homogeneously distributed on the West Bank. The relatively greater number of Agaricia spp., Madracis decastis, and P. astreoides colonies on the East Bank may be the source of a decreased evenness. The health of reef corals was assessed using repetitive and non-repetitive photographic methods, and accretionary growth measurements of M. annularis. Reef corals have undergone small scale changes at the Flower Gardens probably reflecting natural disturbance, predation, disease, and inter-specific competition. White mat disease (ridge disease) is shown to generate more tissue loss than any of the three bleaching events that took place at the Flower Gardens (1989, 1990, and 1991). Advance to retreat linear ratios of encrusting growth revealed a net tissue gain on the East Bank and a net tissue loss on the West Bank. Growth rates of M. annularis were highly variable. The annual barium content from 1910 in 1989 in a M. annularis colony from the West Flower Garden did not reveal trends associated with the extensive oil and gas exploration in the northern Gulf of Mexico.

  4. Hydrogenation of Acetylene-Ethylene Mixtures over Pd and Pd-Ag Alloys: First-Principles Based Kinetic Monte Carlo Simulations

    SciTech Connect (OSTI)

    Mei, Donghai; Neurock, Matthew; Smith, C Michael

    2009-10-22

    The kinetics for the selective hydrogenation of acetylene-ethylene mixtures over model Pd(111) and bimetallic Pd-Ag alloy surfaces were examined using first principles based kinetic Monte Carlo (KMC) simulations to elucidate the effects of alloying as well as process conditions (temperature and hydrogen partial pressure). The mechanisms that control the selective and unselective routes which included hydrogenation, dehydrogenation and C-?C bond breaking pathways were analyzed using first-principle density functional theory (DFT) calculations. The results were used to construct an intrinsic kinetic database that was used in a variable time step kinetic Monte Carlo simulation to follow the kinetics and the molecular transformations in the selective hydrogenation of acetylene-ethylene feeds over Pd and Pd-Ag surfaces. The lateral interactions between coadsorbates that occur through-surface and through-space were estimated using DFT-parameterized bond order conservation and van der Waal interaction models respectively. The simulation results show that the rate of acetylene hydrogenation as well as the ethylene selectivity increase with temperature over both the Pd(111) and the Pd-Ag/Pd(111) alloy surfaces. The selective hydrogenation of acetylene to ethylene proceeds via the formation of a vinyl intermediate. The unselective formation of ethane is the result of the over-hydrogenation of ethylene as well as over-hydrogenation of vinyl to form ethylidene. Ethylidene further hydrogenates to form ethane and dehydrogenates to form ethylidyne. While ethylidyne is not reactive, it can block adsorption sites which limit the availability of hydrogen on the surface and thus act to enhance the selectivity. Alloying Ag into the Pd surface decreases the overall rated but increases the ethylene selectivity significantly by promoting the selective hydrogenation of vinyl to ethylene and concomitantly suppressing the unselective path involving the hydrogenation of vinyl to ethylidene and the dehydrogenation ethylidene to ethylidyne. This is consistent with experimental results which suggest only the predominant hydrogenation path involving the sequential addition of hydrogen to form vinyl and ethylene exists over the Pd-Ag alloys. Ag enhances the desorption of ethylene and hydrogen from the surface thus limiting their ability to undergo subsequent reactions. The simulated apparent activation barriers were calculated to be 32-44 kJ/mol on Pd(111) and 26-31 kJ/mol on Pd-Ag/Pd(111) respectively. The reaction was found to be essentially first order in hydrogen over Pd(111) and Pd-Ag/Pd(111) surfaces. The results reveal that increases in the hydrogen partial pressure increase the activity but decrease ethylene selectivity over both Pd and Pd-Ag/Pd(111) surfaces. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

  5. Environmental Assessment and Finding of No Significant Impact: Implementation of the Wetland Mitigation Bank Program at the Savannah River Site

    SciTech Connect (OSTI)

    N /A

    1999-04-28

    The Department of Energy (DOE) has prepared an environmental assessment (EA) (DOE/EA-1205) for the proposed implementation of a wetland mitigation bank program at the Savannah River Site (SRS), located near Aiken, South Carolina. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an environmental impact statement (EIS) is not required, and DOE is issuing this Finding of No Significant Impact (FONSI) and Floodplain Statement of Findings.

  6. Longwall data bank. Quarterly project status report, February 28-May 28, 1982 and semiannual report No. 2

    SciTech Connect (OSTI)

    Not Available

    1982-07-01

    During the period of February through May 1982, five updated longwall questionnaires were received from operators and two additional longwalls were added to the questionnaire file. Two requests for information from the Data Bank were received and processed. Data from questionnaires were tabulated and analyzed. Also, relevant coal-mining publications were reviewed for longwall references and 29 were added to the index file. Thirty abstracts were prepared from selected R and D reports, conference papers, and articles in professional journals. These and 15 others prepared since the first semiannual report appear in Appendix B.

  7. Effect of addition of Ag nano powder on mechanical properties of epoxy/polyaminoamide adduct coatings filled with conducting polymer

    SciTech Connect (OSTI)

    Samad, Ubair Abdus; Khan, Rawaiz; Alam, Mohammad Asif; Al-Othman, Othman Y.; Al-Zahrani, Saeed M.

    2015-05-22

    In this study the effect of Ag Nano powder on mechanical properties of epoxy coatings filled with optimized ratio of conducting polymers (Polyaniline and Polyppyrole) was evaluated. Bisphenol A diglycidyl ether epoxy resin (DGEBA) along with polyaminoamide adduct (ARADUR 3282-1 BD) is used as curing agent under optimized stoichiometry values. Curing is performed at room temperature with different percentages of Nano filler. Glass and steel panels were used as coating substrate. Bird applicator was used to coat the samples in order to obtain thin film with wet film thickness (WFT) of about 70-90?m. The samples were kept in dust free environment for about 7 days at room temperature for complete curing. The coated steel panels were used to evaluate the mechanical properties of coating such as hardness, scratch and impact tests whereas coated glass panels were used for measuring pendulum hardness of the coatings. To check the dispersion and morphology of Nano filler in epoxy matrix scanning electron microscopy (SEM) was used in addition Nano indentation was also performed to observe the effect of Nano filler on modulus of elasticity and hardness at Nano scale.

  8. Performance of pancake coils of parallel co-wound Ag/BSCCO tape conductors in static and ramped magnetic fields

    SciTech Connect (OSTI)

    Schwenterly, S.W.; Lue, J.W.; Lubell, M.S.; Walker, M.S.; Hazelton, D.W.; Haldar, P.; Rice, J.A.; Hoehn, J.G. Jr.; Motowidlo, L.R.

    1994-12-31

    Critical Currents are reported for several Ag/BSCCO single-pancake coils in static magnetic fields ranging from 0 to 5 T and temperatures from 4.2 K to 105 K. The sample coils were co-wound of one to six tape conductors in parallel. Since the closed loops formed in such an arrangement could lead to eddy current heating or instability in changing fields, one of the coils was also tested in helium gas, in fields ramped at rates of up to 1.5 T/s. For these quasi-adiabatic tests, at each temperature the transport current was set just below the critical value for a preset static field of 3.3 or 4.9 T. The field was then rapidly ramped down to zero, held for 20 sec, and then ramped back up to the original value. The maximum observed temperature transient of about 1.7 K occurred at 9 K, for a field change of 4.75 T. The temperature transients became negligible when the sample was immersed in liquid helium. Above 30 K, the transients were below 1 K. These results give confidence that parallel co-wound HTSC coils are stable in a rapidly-ramped magnetic field, without undue eddy current heating.

  9. Multishell Au/Ag/SiO2 nanorods with tunable optical properties as single particle orientation and rotational tracking probes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chen, Kuangcai; Lin, Chia -Cheng; Vela, Javier; Fang, Ning

    2015-04-07

    In this study, three-layer core–shell plasmonic nanorods (Au/Ag/SiO2–NRs), consisting of a gold nanorod core, a thin silver shell, and a thin silica layer, were synthesized and used as optical imaging probes under a differential interference contrast microscope for single particle orientation and rotational tracking. The localized surface plasmon resonance modes were enhanced upon the addition of the silver shell, and the anisotropic optical properties of gold nanorods were maintained. The silica coating enables surface functionalization with silane coupling agents and provides enhanced stability and biocompatibility. Taking advantage of the longitudinal LSPR enhancement, the orientation and rotational information of the hybridmore » nanorods on synthetic lipid bilayers and on live cell membranes were obtained with millisecond temporal resolution using a scientific complementary metal-oxide-semiconductor camera. The results demonstrate that the as-synthesized hybrid nanorods are promising imaging probes with improved sensitivity and good biocompatibility for single plasmonic particle tracking experiments in biological systems.« less

  10. Plasmonic excitations in ZnO/Ag/ZnO multilayer systems: Insight into interface and bulk electronic properties

    SciTech Connect (OSTI)

    Philipp, Martin; Knupfer, Martin; Buechner, Bernd; Gerardin, Hadia

    2011-03-15

    Electron energy-loss spectroscopy experiments in transmission were carried out on silver-based multi-layer systems, consisting of a silver layer of various thicknesses (8, 10 and 50 nm) sandwiched between two Al-doped ZnO layers. The films were produced by magnetron sputtering using potassium bromide single crystals as substrates. The electronic structure of these systems was probed and analyzed with respect to their plasmonic excitations, which can be basically split up into excitations of the electrons in the bulk silver and excitations at the ZnO:Al/Ag interface. A detailed examination of the momentum dependence of the plasmon peaks revealed a positive dispersion for both, the volume and the interface plasmon, where only for the first one a quadratic behavior (as expected for a free electron gas) could be observed. Furthermore, the peak width was analyzed and set into relation to electrical conductivity measurements by calculating the plasmon lifetime and the electron scattering rate. Here, a good agreement between these different methods was obtained.

  11. Raman spectroscopy, dielectric properties and phase transitions of Ag{sub 0.96}Li{sub 0.04}NbO{sub 3} ceramics

    SciTech Connect (OSTI)

    Niewiadomski, Adrian; Kania, Antoni; Kugel, Godefroy E.; Hafid, Mustapha; Sitko, Dorota

    2015-05-15

    Highlights: • First Raman scattering studies of Ag{sub 0.96}Li{sub 0.04}NbO{sub 3}, allowed us to correlate temperature evolution of relaxational frequency γ{sub R}(T) with the Nb-ion dynamics and showed its changes at freezing temperature and ferrielectric transition. - Abstract: Silver lithium niobates Ag{sub 1−x}Li{sub x}NbO{sub 3} are promising lead free piezoelectrics. Good quality Ag{sub 0.96}Li{sub 0.04}NbO{sub 3} ceramics were obtained. Dielectric and DSC studies showed that, in comparison to AgNbO{sub 3,} temperatures of phase transitions slightly decrease. Dielectric studies pointed to enhancement of polar properties. Remnant polarisations achieves value of 0.6 μC/cm{sup 2}. Maximum of ϵ(T) dependences related to the relaxor-like ferroelectric/ferrielectric M{sub 1}–M{sub 2} transition becomes higher and more frequency dependent. Analysis of Raman spectra showed that two modes at 50 and 194 cm{sup −1} exhibit significant softening. Low frequency part of the Raman spectra which involve central peak and soft mode were analysed using two models. CP was assumed as relaxational vibration and described by Debye function. The slope of temperature dependences of relaxational frequency γ{sub R}(T) changes at approximately 470 and 330 K, indicating that slowing down process of relaxational vibrations changes in the vicinity of partial freezing of Nb-ion dynamics T{sub f} and further freezing at ferroelectric/ferrielectric phase transition.

  12. Fabrication and microstructure of cerium doped lutetium aluminum garnet (Ce:LuAG) transparent ceramics by solid-state reaction method

    SciTech Connect (OSTI)

    Li, Junlang; Xu, Jian; Shi, Ying; Qi, Hongfang; Xie, Jianjun; Lei, Fang

    2014-07-01

    Highlights: We fabricate Ce doped lutetium aluminum garnet ceramics by solid-state method. The raw materials include Lu{sub 2}O{sub 3} nanopowders synthesized by co-precipitation method. The density of the transparent ceramics reach 99.7% of the theoretical value. The optical transmittance of the bulk ceramic at 550 nm was 57.48%. Some scattering centers decrease the optical characteristic of the ceramic. - Abstract: Polycrystalline Ce{sup 3+} doped lutetium aluminum garnet (Ce:LuAG) transparent ceramics fabricated by one step solid-state reaction method using synthetic nano-sized Lu{sub 2}O{sub 3}, commercial ?-Al{sub 2}O{sub 3} and CeO{sub 2} powders were investigated in this paper. The green compacts shaped by the mixed powders were successfully densified into Ce:LuAG transparent ceramics after vacuum sintering at 1750 C for 10 h. The in-line optical transmittance of the Ce:LuAG ceramic made by home-made Lu{sub 2}O{sub 3} powders could reach 57.48% at 550 nm, which was higher than that of the ceramic made by commercial Lu{sub 2}O{sub 3} powders (22.96%). The microstructure observation showed that light scattering centers caused by micro-pores, aluminum segregation and refraction index inhomogeneities induced the decrease of optical transparency of the Ce:LuAG ceramics, which should be removed and optimized in the future work.

  13. Monitoring bank erosion at the Locke Island Archaeological National Register District: Summary of 1996/1997 field activities

    SciTech Connect (OSTI)

    Nickens, P.R.; Bjornstad, B.N.; Nickens, P.R.; Cadoret, N.A.; Wright, M.K.

    1998-08-01

    Locke Island is located in the Columbia River in south-central Washington. The US Department of Energy (DOE) owns Locke Island as part of its Hanford Site. In the 1960s and 1970s, as a result of intensive irrigation developments on the inland shoreline to the east of the island, the White Bluffs, which form the eastern boundary of the Columbia River channel in this area, began to show geological failures as excess irrigation water seeped out along the bluffs. One of the largest such failures, known as the Locke Island Landslide, is located just east of Locke Island. By the early 1980s, this landslide mass had moved westward into the river channel toward the island and was diverting the current at the island`s eastern perimeter. Erosion of the bank in the center of the island accelerated, threatening the cultural resources. By the early 1990s, the erosion had exposed cultural features and artifacts along the bank, leading to the beginning of intermittent monitoring of the cutbank. In 1994, DOE initiated more scheduled, systematic monitoring of island erosion to better understand the physical processes involved as well as mitigate ongoing loss of the archaeological record.

  14. X-ray diffraction structure of the 1,1{prime}-bis(diphenylphosphino)ferrocene (dppf)-bridged complex [(dppf)AgCl]{sub 2}: An unexpected product from the reaction between cis-(bpy){sub 2}RuCl{sub 2} and dppf in the presence of AgBF{sub 4}

    SciTech Connect (OSTI)

    Yang, K.; Bott, S.G.; Richmond, M.G.

    1995-05-01

    The reaction between cis-Ru(bpy){sub 2}Cl{sub 2}(where bpy = bipyridine) and the diphosphine ligand 1,1 {prime} - bis(diphenylphosphino)ferrocene (dppf) in the presence of AgBF{sub 4} has led to the isolation of the title compound [Ag(dppf)Cl]{sub 2}. [Ag(dppf)Cl]{sub 2} has been structurally characterized by X-ray diffraction analysis, which confirms the bridging mode adopted by the ancillary dppf ligand and the centrosymmetric nature of this molecule. Dimeric [Ag(dppf)Cl]{sub 2} crystallizes in the triclinic space group P1, a = 11.426(1) {angstrom}, b = 11.509(1) {angstrom}, c = 12.786(1) {angstrom}, {alpha} = 68.96(2){degrees}, {beta} = 70.66(2){degrees} = {gamma} = 71.24(2){degrees}, V = 1441(1) {angstrom}{sup 3}, Z = 1, d{sub calc} = 1.608 g {center_dot} cm{sup {minus}3}; R = 0.0445, R{sub 2} = 0.0566 for 4486 observed reflections with l {ge} 3{sigma}(l).

  15. ON THE NATURE OF THE PROTOTYPE LUMINOUS BLUE VARIABLE AG CARINAE. II. WITNESSING A MASSIVE STAR EVOLVING CLOSE TO THE EDDINGTON AND BISTABILITY LIMITS

    SciTech Connect (OSTI)

    Groh, J. H.; Hillier, D. J.; Damineli, A.

    2011-07-20

    We show that the significantly different effective temperatures (T{sub eff}) achieved by the luminous blue variable AG Carinae during the consecutive visual minima of 1985-1990 (T{sub eff} {approx_equal} 22,800 K) and 2000-2001 (T{sub eff} {approx_equal} 17,000 K) place the star on different sides of the bistability limit, which occurs in line-driven stellar winds around T{sub eff} {approx} 21,000 K. Decisive evidence is provided by huge changes in the optical depth of the Lyman continuum in the inner wind as T{sub eff} changes during the S Dor cycle. These changes cause different Fe ionization structures in the inner wind. The bistability mechanism is also related to the different wind parameters during visual minima: the wind terminal velocity was 2-3 times higher and the mass-loss rate roughly two times smaller in 1985-1990 than in 2000-2003. We obtain a projected rotational velocity of 220 {+-} 50 km s{sup -1} during 1985-1990 which, combined with the high luminosity (L{sub *} = 1.5 x 10{sup 6} L{sub sun}), puts AG Car extremely close to the Eddington limit modified by rotation ({Omega}{Gamma} limit): for an inclination angle of 90{sup 0}, {Gamma}{sub {Omega}} {approx}> 1.0 for M{sub sun} {approx}< 60. Based on evolutionary models and mass budget, we obtain an initial mass of {approx}100 M{sub sun} and a current mass of {approx}60-70 M{sub sun} for AG Car. Therefore, AG Car is close to, if not at, the {Omega}{Gamma} limit during visual minimum. Assuming M = 70 M{sub sun}, we find that {Gamma}{sub {Omega}} decreases from 0.93 to 0.72 as AG Car expands toward visual maximum, suggesting that the star is not above the Eddington limit during maximum phases.

  16. The potential effect of metallothionein 2A - 5 A/G single nucleotide polymorphism on blood cadmium, lead, zinc and copper levels

    SciTech Connect (OSTI)

    Kayaalti, Zeliha Aliyev, Vugar; Soeylemezoglu, Tuelin

    2011-10-01

    Metallothioneins (MTs) are low molecular weight, cysteine-rich, metal-binding proteins. Because of their rich thiol groups, MTs bind to the biologically essential metals and perform these metals' homeostatic regulations; absorb the heavy metals and assist with their transportation and extraction. The aim of this study was to investigate the association between the metallothionein 2A (MT2A) core promoter region - 5 A/G single nucleotide polymorphism (SNP) and Cd, Pb, Zn and Cu levels in the blood samples. MT2A polymorphism was determined by the standard polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) technique using the 616 blood samples and the genotype frequencies were found as 86.6% homozygote typical (AA), 12.8% heterozygote (AG) and 0.6% homozygote atypical (GG). Metal levels were analyzed by dual atomic absorption spectrophotometer system and the average levels of Cd, Pb, Zn and Cu in the blood samples were 1.69 {+-} 1.57 ppb, 30.62 {+-} 14.13 ppb, 0.98 {+-} 0.49 ppm and 1.04 {+-} 0.45 ppm, respectively. As a result; highly statistically significant associations were detected between the - 5 A/G core promoter region SNP in the MT2A gene and Cd, Pb and Zn levels (p = 0.004, p = 0.012 and p = 0.002, respectively), but no association was found with Cu level (p = 0.595). Individuals with the GG genotype had statistically lower Zn level and higher Cd and Pb levels in the blood samples than individuals with AA and AG genotypes. This study suggests that having the GG genotype individuals may be more sensitive for the metal toxicity and they should be more careful about protecting their health against the toxic effects of the heavy metals. - Highlights: > MT2A -5A/G SNP has strong effect on the Cd, Pb and Zn levels in the blood. > MT2A GG individuals should be more careful for their health against metal toxicity. > This SNP might be considered as a biomarker for risk of disease related to metals.

  17. Spectral content of buried Ag foils at 10{sup 16} W/cm{sup 2} laser illumination

    SciTech Connect (OSTI)

    Huntington, C. M. Maddox, B. R.; Park, H.-S.; Prisbrey, S.; Remington, B. A.

    2014-11-15

    Sources of 5–12 keV thermal Heα x-rays are readily generated by laser irradiation of mid-Z foils at intensities >10{sup 14} W/cm{sup 2}, and are widely used as probes for inertial confinement fusion and high-energy-density experiments. Higher energy 17–50 keV x-ray sources are efficiently produced from “cold” Kα emission using short pulse, petawatt lasers at intensities >10{sup 18} W/cm{sup 2} [H.-S. Park, B. R. Maddox et al., “High-resolution 17–75 keV backlighters for high energy density experiments,” Phys. Plasmas 15(7), 072705 (2008); B. R. Maddox, H. S. Park, B. A. Remington et al., “Absolute measurements of x-ray backlighter sources at energies above 10 keV,” Phys. Plasmas 18(5), 056709 (2011)]. However, when long pulse (>1 ns) lasers are used with Z > 30 elements, the spectrum contains contributions from both K shell transitions and from ionized atomic states. Here we show that by sandwiching a silver foil between layers of high-density carbon, the ratio of Kα:Heα in the x-ray spectrum is significant increased over directly illuminated Ag foils, with narrower lines from K-shell transitions. Additionally, the emission volume is more localized for the sandwiched target, producing a more planar x-ray sheet. This technique may be useful for generating probes requiring spectral purity and a limited spatial extent, for example, in incoherent x-ray Thomson scattering experiments.

  18. Longwall data bank. Quarterly project status report, August 28-November 28, 1982 and semiannual report No. 3

    SciTech Connect (OSTI)

    Not Available

    1983-01-01

    The objectives of the program are to compile and transfer to the coal industry comprehensive operational data on US longwall installations, and to provide abstracts of domestic and foreign literature related to longwall production, productivity, and dust control published since 1975. During the period of August through November 1982, five updated longwall questionnaires were received from operators and two additional longwalls were added to the questionnaire file. Three requests for information from the Data Bank were received and processed. Data from questionnaires were tabulated and analyzed. Also, relevant coal-mining publications were reviewed for articles on longwall mining. Fifteen abstracts were prepared from selected R and D reports, conference papers, and articles in professional journals. These abstracts are included in Appendix B.

  19. fileAgLSuz

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  20. REFERENCE NO. OF DOCUMENT BEING CONTINUED AEO CONTINUATION SHEETI DE-AC27-08RV14800/075 [AG OF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHEETI DE-AC27-08RV14800/075 [AG OF NAME OF OFFEROR OR CONTRACTOR WASHINGTON RIVER PROTECTION SOLUTIONS LLC ITEM NO. SUPPLIES/SERVICES QUANTITY JNIT UNIT PRICE AMOUNT (A) j(B) (C) (D) (E) (F) Account code: Fund 01250 Appr Year 2ulu Allottee 34 Reporting Entity 421301 Object Class 25200 Program 1110909 Project 0001481 WFO 0000000 Local Use 0000000 Amount: $5,918,827.27 Account code: WTP Support Funding for RFS OWTPO1 Fund 01250 Appr Year 2010 Allottee 34 R eporting Entity 421301 uuj1JeLu