Powered by Deep Web Technologies
Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Analysis Driven Field Testing  

Broader source: Energy.gov (indexed) [DOE]

ANALYSIS DRIVEN FIELD TESTING ANALYSIS DRIVEN FIELD TESTING Greg Barker, MEP Paul Norton, NERD C.E. Hancock, MEP Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 MODELING DRIVEN FIELD TESTING Greg Barker, MEP Paul Norton, NERD C.E. Hancock, MEP Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 MODELING DRIVEN MEASUREMENTS Greg Barker, MEP Paul Norton, NERD C.E. Hancock, MEP Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 Building America Residential Energy Efficiency Stakeholder Meeting Austin, TX March 2, 2012 "Modeling without measuring lacks credibility. Measuring without modeling lacks generality." Ed Hancock

2

In situ testing to determination field-saturated hydraulic conductivity of UMTRA Project disposal cell covers, liners, and foundation areas. Special study  

SciTech Connect (OSTI)

This special study was conducted to prepare a guidance document for selecting in situ hydraulic conductivity (K) tests, comparing in situ testing methods, and evaluating the results of such tests. This report may be used as a practical decision-making tool by the Uranium Mill Tailings Remedial Action (UMTRA) Project staff to determine which testing method will most efficiently achieve the field-saturated K results needed for long-term planning. A detailed section on near-surface test methods discusses each method which may be applicable to characterization of UMTRA disposal cell covers, liners and foundation materials. These potentially applicable test methods include the sealed double-ring infiltrometer (SDRI), the air-entry permeameter (AEP), the guelph permeameter, the two-stage borehole technique (TSB), the pressure infiltrometer, and the disk permeameter. Analytical solutions for these methods are provided, and limitations of these solutions are discussed, and a description of testing equipment design and installation are provided.

Not Available

1994-02-01T23:59:59.000Z

3

Summary of Test Results for the Interagency Field Test &Evaluation...  

Broader source: Energy.gov (indexed) [DOE]

Summary of Test Results for the Interagency Field Test &Evaluation of Wind Turbine - Radar Interference Mitigation Technologies Summary of Test Results for the Interagency Field...

4

Determination of Electric-Field, Magnetic-Field, and Electric...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electric-Field, Magnetic-Field, and Electric-Current Distributions of Infrared Optical Antennas: A Near-Field Determination of Electric-Field, Magnetic-Field, and Electric-Current...

5

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network [OSTI]

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS APPENDICES.................................................................................... 5 B.2. DR Automation Server User Guide

6

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Broader source: Energy.gov (indexed) [DOE]

Strategic Petroleum Reserve Strategic Petroleum Reserve Field Office Categorical Exclusion Determinations: Strategic Petroleum Reserve Field Office Categorical Exclusion Determinations issued by Strategic Petroleum Reserve Field Office. DOCUMENTS AVAILABLE FOR DOWNLOAD August 22, 2013 CX-010876: Categorical Exclusion Determination Smart and Calibrated Pig Surveys of Strategic Petroleum Reserve Raw Water/Crude Oil Pipelines CX(s) Applied: B1.3 Date: 08/22/2013 Location(s): Texas, Louisiana Offices(s): Strategic Petroleum Reserve Field Office August 19, 2013 CX-010877: Categorical Exclusion Determination Clean and Inspect West Hackberry T-15 Brine Tank CX(s) Applied: B1.3 Date: 08/19/2013 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office August 8, 2013 CX-010878: Categorical Exclusion Determination

7

Power Electronics Field Test Facility (TPET) The Power Electronics Field Test Facility (TPET) is a unique test facility for field testing of  

E-Print Network [OSTI]

Power Electronics Field Test Facility (TPET) Overview: The Power Electronics Field Test Facility (TPET) is a unique test facility for field testing of power electronics that will be located at the TVA the testing of power electronics and energy storage technology from laboratory development and testing through

8

RESULTS OF FIELD TESTING DOE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Energy facility located within Naval Petroleum Reserve No. 3 (NPR-3), also known as Teapot Dome Oil Field, about 35 miles north of Casper, Wyoming. Teapot Dome Field, Natrona...

9

Categorical Exclusion Determinations: Program and Field Offices |  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Determinations: Program and Field Offices Determinations: Program and Field Offices Categorical Exclusion Determinations: Program and Field Offices This page contains links (below) to pages on DOE Program, Field, or Site Office websites containing the CX determinations required to be posted under this policy, and also some for which documentation and posting are optional, i.e., determinations involving classes of actions listed in Appendix A or made before the policy's effective date of November 2, 2009. You may browse the determinations posted on each of the websites at the links below (you would be leaving this website), or view them directly on this website. SECRETARIAL OFFICES Advanced Research Projects Agency-Energy Advanced Technology Vehicles Manufacturing Loan Program Civilian Radioactive Waste Management

10

NREL: Wind Research - Field Test Sites  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Field Test Sites Field Test Sites Aerial view of the National Wind Technology Center with the Flatiron Mountains in the background NREL's NWTC has numerous test pads available to industry partners for testing wind turbines that range in size from a few hundred kilowatts to several megawatts. PIX 17711. Manufacturers can take advantage of NREL's numerous test pads and the technical expertise of its staff to field test prototypes of small and large wind turbines. Many of the small wind turbines tested at the NWTC are participants in NREL's Small Wind Turbine Independent Test Program. Small and mid-sized turbines field tested at the NWTC include those manufactured by Atlantic Orient Corporation, Bergey Windpower, Southwest Wind Power, Northern Power Systems, Endurance Wind Power Inc., Gaia-Wind Ltd.,

11

Cone Penetrometer N Factor Determination Testing Results  

SciTech Connect (OSTI)

This document contains the results of testing activities to determine the empirical 'N Factor' for the cone penetrometer in kaolin clay simulant. The N Factor is used to releate resistance measurements taken with the cone penetrometer to shear strength.

Follett, Jordan R.

2014-03-05T23:59:59.000Z

12

Field Test Best Practices (FTBP) Update  

Broader source: Energy.gov (indexed) [DOE]

Field Test Best Practices (FTBP) Update: Field Test Best Practices (FTBP) Update: It's here! And we need you! Lieko Earle Dane Christensen Bethany Sparn Building America Stakeholder Meeting 2012-03-02 NATIONAL RENEWABLE ENERGY LABORATORY Identified Field Testing Needs 2 * Difficult to find good general guidelines * Difficult to find examples of good field test plans * Difficult to find information on instrumentation options * No easily-accessible central repository for best practices knowledge * Field tests were taking longer and costing more $$ than initially estimated * We keep reinventing the wheel * Start from scratch each time we write a data-logger program? * Repeat each other's mistakes? NATIONAL RENEWABLE ENERGY LABORATORY What is the FTBP Resource?

13

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Broader source: Energy.gov (indexed) [DOE]

20, 2010 20, 2010 CX-001669: Categorical Exclusion Determination Install Fence Around Bryan Mound K-9 Training Area CX(s) Applied: B1.11 Date: 04/20/2010 Location(s): Freeport, Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office April 7, 2010 CX-001518: Categorical Exclusion Determination Re-seal Polyurethane Overcoat on BH Substation Relay Building 814 CX(s) Applied: B1.3 Date: 04/07/2010 Location(s): Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office March 16, 2010 CX-001227: Categorical Exclusion Determination Replacement of Big Hill Deep Anode Ground Bed Site for Cavern 114 CX(s) Applied: B1.3 Date: 03/16/2010 Location(s): Big Hill, Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office March 3, 2010 CX-001004: Categorical Exclusion Determination

14

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Broader source: Energy.gov (indexed) [DOE]

October 31, 2012 October 31, 2012 CX-009509: Categorical Exclusion Determination Power Monitoring, Communication and Control Upgrade at Bryan Mound Degas Plant (Install) CX(s) Applied: B1.7 Date: 10/31/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office October 30, 2012 CX-009510: Categorical Exclusion Determination Strategic Petroleum Reserve Emergency Pipeline and Piping Repair, 2013-2017 CX(s) Applied: B5.4 Date: 10/30/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office October 2, 2012 CX-009216: Categorical Exclusion Determination ADAS System Life Cycle Support, 2012-2015 CX(s) Applied: B1.7 Date: 10/02/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office September 24, 2012 CX-009217: Categorical Exclusion Determination

15

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Broader source: Energy.gov (indexed) [DOE]

10, 2012 10, 2012 CX-008350: Categorical Exclusion Determination Re-work Bryan Mound 30" Crude Oil Pipeline Mainline Valves CX(s) Applied: B1.3 Date: 04/10/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office April 10, 2012 CX-008349: Categorical Exclusion Determination Replacement Anode Bed on West Hackberry 42-inch Crude Oil Pipeline at Gum Cove Road CX(s) Applied: B1.3 Date: 04/10/2012 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office March 28, 2012 CX-008351: Categorical Exclusion Determination Transport and Perform TD&I on Big Hill TX-29 Transformer CX(s) Applied: B1.3 Date: 03/28/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office February 23, 2012 CX-007816: Categorical Exclusion Determination

16

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Broader source: Energy.gov (indexed) [DOE]

June 20, 2011 June 20, 2011 CX-006251: Categorical Exclusion Determination Big Hill Heat Exchanger Isolation Valves - Install CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Jefferson County, Texas Office(s): Strategic Petroleum Reserve Field Office June 20, 2011 CX-006250: Categorical Exclusion Determination Blast and Paint Bayou Choctaw Brine Pump Pad and Associate Piping CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Iberville Parish, Louisiana Office(s): Strategic Petroleum Reserve Field Office June 20, 2011 CX-006249: Categorical Exclusion Determination Blast and Paint West Hackberry Heat Exchanger Headers and Overhead Rack Piping CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Cameron Parish, Louisiana Office(s): Strategic Petroleum Reserve Field Office June 20, 2011

17

IN SITU FIELD TESTING OF PROCESSES  

SciTech Connect (OSTI)

The purpose of this scientific analysis report is to update and document the data and subsequent analyses from ambient field-testing activities performed in underground drifts and surface-based boreholes through unsaturated zone (UZ) tuff rock units. In situ testing, monitoring, and associated laboratory studies are conducted to directly assess and evaluate the waste emplacement environment and the natural barriers to radionuclide transport at Yucca Mountain. This scientific analysis report supports and provides data to UZ flow and transport model reports, which in turn contribute to the Total System Performance Assessment (TSPA) of Yucca Mountain, an important document for the license application (LA). The objectives of ambient field-testing activities are described in Section 1.1. This report is the third revision (REV 03), which supercedes REV 02. The scientific analysis of data for inputs to model calibration and validation as documented in REV 02 were developed in accordance with the Technical Work Plan (TWP) ''Technical Work Plan for: Performance Assessment Unsaturated Zone'' (BSC 2004 [DIRS 167969]). This revision was developed in accordance with the ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Section 1.2.4) for better integrated, consistent, transparent, traceable, and more complete documentation in this scientific analysis report and associated UZ flow and transport model reports. No additional testing or analyses were performed as part of this revision. The list of relevant acceptance criteria is provided by ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654]), Table 3-1. Additional deviations from the TWP regarding the features, events, and processes (FEPs) list are discussed in Section 1.3. Documentation in this report includes descriptions of how, and under what conditions, the tests were conducted. The descriptions and analyses provide data useful for refining and confirming the understanding of flow, drift seepage, and transport processes in the UZ. The UZ testing activities included measurement of permeability distribution, quantification of the seepage of water into the drifts, evaluation of fracture-matrix interaction, study of flow along faults, testing of flow and transport between drifts, characterization of hydrologic heterogeneity along drifts, estimation of drying effects on the rock surrounding the drifts due to ventilation, monitoring of moisture conditions in open and sealed drifts, and determination of the degree of minimum construction water migration below drift. These field tests were conducted in two underground drifts at Yucca Mountain, the Exploratory Studies Facility (ESF) drift, and the cross-drift for Enhanced Characterization of the Repository Block (ECRB), as described in Section 1.2. Samples collected in boreholes and underground drifts have been used for additional hydrochemical and isotopic analyses for additional understanding of the UZ setting. The UZ transport tests conducted at the nearby Busted Butte site (see Figure 1-4) are also described in this scientific analysis report.

J.S.Y. YANG

2004-11-08T23:59:59.000Z

18

FIELD TEST OF THE FLAME QUALITY INDICATOR  

SciTech Connect (OSTI)

The flame quality indicator concept was developed at BNL specifically to monitor the brightness of the flame in a small oil burner and to provide a ''call for service'' notification when the brightness has changed from its setpoint, either high or low. In prior development work BNL has explored the response of this system to operational upsets such as excess air changes, fouled atomizer nozzles, poor fuel quality, etc. Insight Technologies, Inc. and Honeywell, Inc. have licensed this technology from the U.S. Department of Energy and have been cooperating to develop product offerings which meet industry needs with an optimal combination of function and price. Honeywell has recently completed the development of the Flame Quality Monitor (FQM or Honeywell QS7100F). This is a small module which connects via a serial cable to the burners primary operating control. Primary advantages of this approach are simplicity, cost, and ease of installation. Call-for-service conditions are output in the form of front panel indicator lights and contact closure which can trigger a range of external communication options. Under this project a field test was conducted of the FQM in cooperation with service organizations in Virginia, Pennsylvania, New Jersey, New York, and Connecticut. At total of 83 field sites were included. At each site the FQM was installed in parallel with another embodiment of this concept--the Insight AFQI. The AFQI incorporates a modem and provides the ability to provide detailed information on the trends in the flame quality over the course of the two year test period. The test site population was comprised of 79.5% boilers, 13.7% warm air furnaces, and 6.8% water heaters. Nearly all were of residential size--with firing rates ranging from 0.6 gallons of oil per hour to 1.25. During the course of the test program the monitoring equipment successfully identified problems including: plugged fuel lines, fouled nozzles, collapsed combustion chambers, and poor fuel pump cut-off. Service organizations can use these early indications to reduce problems and service costs. There were also some ''call-for-service'' indications for which problems were not identified. The test program also showed that monitoring of the flame can provide information on burner run times and this can be used to estimate current oversize factors and to determine actual fuel usage, enabling more efficient fuel delivery procedures.

Andrew M. Rudin; Thomas Butcher; Henry Troost

2003-02-04T23:59:59.000Z

19

Field test of microemulsion flooding, Chateaurenard Field, France  

SciTech Connect (OSTI)

A pilot test of microemulsion flooding was conducted in a single five-spot pattern in the Chateaurenard field in France. The test had to accommodate a 40-mPa*s (40-cp) oil viscosity and a regional pressure gradient across the pattern. A very clear oil bank was observed, resulting in a substantial increase in oil production. 9 refs.

Putz, A.; Chevalier, J.P.; Stock, G.; Philippot, J.

1981-04-01T23:59:59.000Z

20

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

July 12, 2012 July 12, 2012 CX-008585: Categorical Exclusion Determination Solar TAC - Thermal Energy Storage Test Facility CX(s) Applied: A9, A11, B1.15, B3.6 Date: 07/12/2012 Location(s): Colorado Offices(s): Golden Field Office July 12, 2012 CX-008583: Categorical Exclusion Determination California State Energy Program Annual Formula CX(s) Applied: A9, A11 Date: 07/12/2012 Location(s): California Offices(s): Golden Field Office July 12, 2012 CX-008592: Categorical Exclusion Determination Hawaii State Energy Program Annual Formula CX(s) Applied: A9, A11 Date: 07/12/2012 Location(s): Hawaii Offices(s): Golden Field Office July 11, 2012 CX-008586: Categorical Exclusion Determination SkyFuel Baseload Parabolic Trough CX(s) Applied: B3.6, B5.15 Date: 07/11/2012 Location(s): Colorado

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

SMART Wind Turbine Rotor: Design and Field Test | Department...  

Energy Savers [EERE]

Design and Field Test SMART Wind Turbine Rotor: Design and Field Test This report documents the design, fabrication, and testing of the SMART Wind Turbine Rotor. This work...

22

Accelerated Stress Testing, Qualification Testing, HAST, Field Experience  

Broader source: Energy.gov [DOE]

This presentation, which was the opening session of the NREL 2013 Photovoltaic Module Reliability Workshop held on February 26, 2013 in Golden, CO, was presented by John Wohlgemuth. Entitled "Accelerated Stress Testing, Qualification Testing, HAST, Field Experience -- What Do They All Mean?" the presentation details efforts to develop accelerated stress tests beyond the qualification test levels, which are necessary to predict PV module wear-out. The commercial success of PVs is ultimately based on the long-term reliability and safety of the deployed PV modules.

23

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

July 13, 2011 July 13, 2011 CX-006216: Categorical Exclusion Determination Oklahoma State Energy Program American Recovery and Reinvestment Act - Oklahoma Municipal Power Authority Large System Request R CX(s) Applied: B5.1 Date: 07/13/2011 Location(s): Edmond, Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office July 5, 2011 CX-006235: Categorical Exclusion Determination Enhanced Geothermal Systems - Concept Testing and Development at the Raft River Geothermal Field, Idaho CX(s) Applied: A9, B3.1, B5.12 Date: 07/05/2011 Location(s): Cassia County, Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office July 5, 2011 CX-006214: Categorical Exclusion Determination Lime Lakes Energy CX(s) Applied: B5.1 Date: 07/05/2011 Location(s): Barberton, Ohio

24

Field testing of waste forms using lysimeters  

SciTech Connect (OSTI)

The Low-Level Waste Data Base Development - EPICOR-II Resin/Liner Investigation Program funded by the US Nuclear Regulatory Commission is obtaining information on performance of radioactive waste in a disposal environment. Waste forms manufactured from ion exchange resins used to clean up water from the accident at Three Mile Island Nuclear Power Station are being examined in field tests. This paper presents a description of the field testing and results from the first year of operation. 8 refs., 8 figs., 4 tabs.

McConnell, J.W. Jr.; Rogers, R.D.

1987-01-01T23:59:59.000Z

25

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS  

E-Print Network [OSTI]

AUTOMATED CRITICAL PEAK PRICING FIELD TESTS: 2006 PROGRAM DESCRIPTION AND RESULTS) for development of the DR Automation Server System This project could not have been completed without extensive: Greg Watson and Mark Lott · C&C Building Automation: Mark Johnson and John Fiegel · Chabot Space

26

Upcoming Funding Opportunity to Develop and Field Test Wind Energy...  

Energy Savers [EERE]

Upcoming Funding Opportunity to Develop and Field Test Wind Energy Bat Impact Minimization Technologies Upcoming Funding Opportunity to Develop and Field Test Wind Energy Bat...

27

Project Impact Assessments: Building America FY14 Field Test...  

Broader source: Energy.gov (indexed) [DOE]

Project Impact Assessments: Building America FY14 Field Test Technical Support - 2014 BTO Peer Review Project Impact Assessments: Building America FY14 Field Test Technical Support...

28

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

2, 2010 2, 2010 CX-003902: Categorical Exclusion Determination Small Wind Turbine Regional Test Center Windward Engineering, LLC in Utah - NREL Tracking Number 10-027 CX(s) Applied: A9, A11, B1.15, B3.1, B5.1 Date: 09/02/2010 Location(s): Spanish Fork, Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 2, 2010 CX-003890: Categorical Exclusion Determination BioEthanol Collaborative - Clemson University CX(s) Applied: B3.6 Date: 09/02/2010 Location(s): South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 1, 2010 CX-003859: Categorical Exclusion Determination Edwardsville Community Unit School District (CUSD) 7 Solar Photovoltaic Project CX(s) Applied: A9, B5.1 Date: 09/01/2010 Location(s): Edwardsville, Illinois

29

Chateaurenard field test recovery mechanisms and interpretation  

SciTech Connect (OSTI)

The Chateaurenard micellar/polymer field test was conducted between 1976 and 1980 in the south part of the Paris Bassin. Pilot design, operations and oil production results have already been presented. We present a detailled analysis of the effluents. It appears that surfactant, most of wich remained trapped in the reservoir, is associated with calcium in the oil when produced, as a result of sodium exchange with the calcium associated with the clay in the reservoir sand. Supporting phase studies and floods through sandpacks are presented to quantify this cation exchange and investigate its influence on oil recovery and phase trapping.

Bourdarot, G.; Putz, A.; Sardin, M.

1984-04-01T23:59:59.000Z

30

Cooperative field test program for wind systems  

SciTech Connect (OSTI)

The objectives of the Federal Wind Energy Program, managed by the US Department of Energy (DOE), are (1) to assist industry and utilities in achieving a multi-regional US market penetration of wind systems, and (2) to establish the United States as the world leader in the development of advanced wind turbine technology. In 1984, the program conducted a series of planning workshops with representatives from the wind energy industry to obtain input on the Five-Year Research Plan then being prepared by DOE. One specific suggestion that came out of these meetings was that the federal program should conduct cooperative research tests with industry to enhance the technology transfer process. It was also felt that the active involvement of industry in DOE-funded research would improve the state of the art of wind turbine technology. DOE established the Cooperative Field Test Program (CFTP) in response to that suggestion. This program was one of the first in DOE to feature joint industry-government research test teams working toward common objectives.

Bollmeier, W.S. II; Dodge, D.M.

1992-03-01T23:59:59.000Z

31

Testing to determine relay seismic ruggedness  

Science Journals Connector (OSTI)

The seismic qualification of equipment in operating nuclear plants has been identified as a potential safety concern in U.S. Nuclear Regulatory Commission (USNRC) Unresolved Safety Issue (USI) A-46, Seismic Qualification of Equipment in Operating Nuclear Power Plants. In response to this concern, the Seismic Qualification Utility Group (SQUG), with support from the Electric Power Research Institute (EPRI), has undertaken a program to demonstrate the seismic adequacy of essential equipment by the use of actual experience with such equipment in plants which have undergone significant earthquakes and by the use of available test data for similar equipment. An important part of this program is the development of the methodology and test data for verifying the functionality of electrical relays used in essential circuits needed for plant shutdown during a seismic event. This paper describes the EPRI supported relay testing program to supplement existing relay test data. Many old relays which are used in safe shutdown systems of SQUG plants and for which seismic test data do not exist have been shake-table tested. The testing performed on these relays and the test results for two groups of relays are summarized in this paper.

K.L. Merz; M.P. Wade; Jess Betlack

1990-01-01T23:59:59.000Z

32

INTERAGENCY FIELD TEST & EVALUATION OF WIND TURBINE - RADAR INTERFEREN...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

the tests and 2) summaries of three field tests designed to measure the impact of wind turbines on current air surveillance radars and the effectiveness of private sector...

33

Building Technologies Office: Field Test Best Practices Website  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Field Test Best Field Test Best Practices Website to someone by E-mail Share Building Technologies Office: Field Test Best Practices Website on Facebook Tweet about Building Technologies Office: Field Test Best Practices Website on Twitter Bookmark Building Technologies Office: Field Test Best Practices Website on Google Bookmark Building Technologies Office: Field Test Best Practices Website on Delicious Rank Building Technologies Office: Field Test Best Practices Website on Digg Find More places to share Building Technologies Office: Field Test Best Practices Website on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America Research Innovations Research Tools Building Science Education Climate-Specific Guidance Solution Center

34

Interagency Field Test Evaluates Co-operation of Turbines and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Interagency Field Test Evaluates Co-operation of Turbines and Radar Interagency Field Test Evaluates Co-operation of Turbines and Radar May 1, 2012 - 2:56pm Addthis The Department...

35

Dynamic Homecare Service Provisioning: A Field Test and Its Results  

E-Print Network [OSTI]

Dynamic Homecare Service Provisioning: A Field Test and Its Results Alireza Zarghami, Mohammad platform. The prototype was subsequently used in a real-world field test at a care institution in the Netherlands to validate the approach. This paper describes the design of the field test and reflects

Wieringa, Roel

36

Categorical Exclusion Determinations: Carlsbad Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

Carlsbad Field Office Carlsbad Field Office Categorical Exclusion Determinations: Carlsbad Field Office Categorical Exclusion Determinations issued by Carlsbad Field Office. DOCUMENTS AVAILABLE FOR DOWNLOAD March 25, 2013 CX-010102: Categorical Exclusion Determination Lease of Office Space to support Waste Isolation Plant activities CX(s) Applied: B1.24 Date: 03/25/2013 Location(s): New Mexico, New Mexico Offices(s): Carlsbad Field Office February 5, 2013 CX-010101: Categorical Exclusion Determination Department of Energy Grant for the City of Carlsbad Improvement of the Double Eagle Well Field CX(s) Applied: A9, B1.7, B1.18 Date: 02/05/2013 Location(s): New Mexico Offices(s): Carlsbad Field Office August 10, 2011 CX-006626: Categorical Exclusion Determination Removal of Standard Waste Box - WIPP

37

Results of the fourth Hanna field test  

SciTech Connect (OSTI)

The second phase (Hanna IVB) of a coal gasification experiment near Hanna, Wyoming, was completed in September 1979. The experiment attempted to link and gasify coal between process wells spaced 34.3 meters apart. Intermediate wells were positioned between the process wells so that the link could be relayed over shorter distances. Reverse combustion linking was attempted over a 22.9-meter and a 11.4-meter distance of the total well spacing. Thermal activity was generally noted in the upper 3 meters of the coal seam during the link. Two attempts to gasify over the 34.3-meter distance resulted in the propagation of the burn front at the coal overburden interface. Post-burn evaluation indicates fractures as major influencing factors of the combustion process. The Hanna IVB field test provided much insight into influence that geologic features have on in situ coal combustion. The influence of these faults, permeable zones, and cleats, on the air flow patterns can drastically change the overall results of a gasification experiment and should be studied further. The overall results of Hanna IVB were discouraging because of the rapid decline in the heating values for the production gas and the amount of coal gasified. With more complete geologic characerization prior to experimentation and proper well completions, it is believed that most of the subsurface operational problems encountered during Hanna IV could have been avoided.

Covell, J. R.; Wojdac, L. F.; Barbour, F. A.; Gardner, G. W.; Glass, R.; Hommert, P. J.

1980-01-01T23:59:59.000Z

38

Building Technologies Office: HVAC and Water Heater Field Tests Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HVAC and Water Heater HVAC and Water Heater Field Tests Research Project to someone by E-mail Share Building Technologies Office: HVAC and Water Heater Field Tests Research Project on Facebook Tweet about Building Technologies Office: HVAC and Water Heater Field Tests Research Project on Twitter Bookmark Building Technologies Office: HVAC and Water Heater Field Tests Research Project on Google Bookmark Building Technologies Office: HVAC and Water Heater Field Tests Research Project on Delicious Rank Building Technologies Office: HVAC and Water Heater Field Tests Research Project on Digg Find More places to share Building Technologies Office: HVAC and Water Heater Field Tests Research Project on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research

39

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

Golden Field Office Golden Field Office Categorical Exclusion Determinations: Golden Field Office Categorical Exclusion Determinations issued by Golden Field Office. DOCUMENTS AVAILABLE FOR DOWNLOAD August 16, 2013 CX-010747: Categorical Exclusion Determination Advanced Commercial Buildings Initiative CX(s) Applied: A9, A11, B5.1 Date: 08/16/2013 Location(s): Georgia Offices(s): Golden Field Office August 15, 2013 CX-010756: Categorical Exclusion Determination Solar Utility Network Deployment Acceleration CX(s) Applied: A9, A11 Date: 08/15/2013 Location(s): Virginia Offices(s): Golden Field Office August 15, 2013 CX-010754: Categorical Exclusion Determination Industrial Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains CX(s) Applied: A9, B2.2, B2.5

40

Field Test Best Practices Website | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings » Building America » Field Test Best Residential Buildings » Building America » Field Test Best Practices Website Field Test Best Practices Website Photo of a man standing in front of a door performing a blower door test. The Field Test Best Practices website is a start-to-finish best practice guide for building science researchers engaged in field evaluations of energy efficiency measures. Developed by the National Renewable Energy Laboratory (NREL), this site is a collaborative effort to improve the quality of research methods that aim to improve energy efficiency of homes. On this website, find detailed guidance on: Defining the research objectives Planning for and conducting a field test Choosing, testing, and installing components Selecting equipment and knowing when and how to use it.

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Pilot-Scale Test Results  

SciTech Connect (OSTI)

This Topical Report summarizes progress on Cooperative Agreement DE-FC26-04NT42309, ''Field Testing of a Wet FGD Additive.'' The objective of the project is to demonstrate the use of a flue gas desulfurization (FGD) additive, Degussa Corporation's TMT-15, to prevent the reemissions of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project intends to demonstrate that the additive can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine TMT salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal. The project will conduct pilot and full-scale tests of the TMT-15 additive in wet FGD absorbers. The tests are intended to determine required additive dosage requirements to prevent Hg{sup 0} reemissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Power River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, TXU Generation Company LP, Southern Company, and Degussa Corporation. TXU Generation has provided the Texas lignite/PRB co-fired test site for pilot FGD tests, Monticello Steam Electric Station Unit 3. Southern Company is providing the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, as well as the pilot and full-scale jet bubbling reactor (JBR) FGD systems to be tested. A third utility, to be named later, will provide the high-sulfur Eastern bituminous coal full-scale FGD test site. Degussa Corporation is providing the TMT-15 additive and technical support to the test program. The project is being conducted in six tasks. Of the six project tasks, Task 1 involves project planning and Task 6 involves management and reporting. The other four tasks involve field testing on FGD systems, either at pilot or full scale. The four tasks include: Task 2 - Pilot Additive Testing in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High Sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. This topical report presents the results from the Task 2 and Task 4 pilot-scale additive tests. The Task 3 and Task 5 full-scale additive tests will be conducted later in calendar year 2006.

Gary M. Blythe

2006-03-01T23:59:59.000Z

42

Controller Field Tests on the NREL CART2 Turbine  

SciTech Connect (OSTI)

This document presents the results of the field tests carried out on the CART2 turbine at NREL to validate individual pitch control and active tower damping.

Bossanyi, E.; Wright, A.; Fleming, P.

2010-12-01T23:59:59.000Z

43

SMART Wind Turbine Rotor: Design and Field Test  

Broader source: Energy.gov [DOE]

Design and field test results from the SMART Rotor project, a wind turbine rotor with integrated trailing-edge flaps designed for active control of the rotor aerodynamics.

44

SNL Begins Field Testing on First SMART Blades  

Broader source: Energy.gov [DOE]

The Department of Energy (DOE) Sandia National Laboratories (SNL) completed fabrication and began field testing a set of wind turbine blades with active load control capabilities.

45

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

, 2010 , 2010 CX-000639: Categorical Exclusion Determination Wide Area Wind Field Monitoring CX(s) Applied: A9, B3.6 Date: 02/01/2010 Location(s): Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 1, 2010 CX-000640: Categorical Exclusion Determination Tuscon Solar Initiative Phase II CX(s) Applied: A9, A11 Date: 02/01/2010 Location(s): Tuscon, Arizona Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 1, 2010 CX-000641: Categorical Exclusion Determination Hydro Fellowship Program CX(s) Applied: A9, A11 Date: 02/01/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 1, 2010 CX-000664: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant

46

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

June 25, 2012 June 25, 2012 CX-008559: Categorical Exclusion Determination New Hampshire Formula Grant for State Energy Program CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): New Hampshire Offices(s): Golden Field Office June 25, 2012 CX-008543: Categorical Exclusion Determination Colorado State Energy Plan 2012 CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): Colorado Offices(s): Golden Field Office June 25, 2012 CX-008538: Categorical Exclusion Determination Program Year 2012 State Energy Program Formula Grant CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): Arizona Offices(s): Golden Field Office June 25, 2012 CX-008552: Categorical Exclusion Determination Massachusetts State Energy Programs CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): Massachusetts Offices(s): Golden Field Office

47

Field Testing for Understanding In Situ Concrete Crosstie  

E-Print Network [OSTI]

Slide 7 · Linear Potentiometer Fixture ­ Welded steel frame ­ Designed for flexible positioning ­ BoltedField Testing for Understanding In Situ Concrete Crosstie and Fastener Behavior Justin Grassé, David Lange 2012 Joint Rail Conference Philadelphia, PA 17-19 April 2012 #12;Field Testing

Barkan, Christopher P.L.

48

Field tests of a small instrumented pile  

E-Print Network [OSTI]

made simultaneously. A mal. hematical model which describes thc &a&ion of a pilc- soil system during pile driving is examined. I. oad t&. -!. data is to evaluate soil damping constants in accordance with thc mathcc&ati- cal model. The load test data... made simultaneously. A mal. hematical model which describes thc &a&ion of a pilc- soil system during pile driving is examined. I. oad t&. -!. data is to evaluate soil damping constants in accordance with thc mathcc&ati- cal model. The load test data...

Korb, Kenneth Wayne

2012-06-07T23:59:59.000Z

49

DOE/RMOTC/05.98001 Hydro-Balanced Stuffing Box Field Test Field Test Project Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

RMOTC/05.98001 RMOTC/05.98001 Hydro-Balanced Stuffing Box Field Test Field Test Project Report Date Published: May 28, 1999 Leo A. Giangiacomo, P.E. Rocky Mountain Oilfield Testing Center 907 N. Poplar, Suite 150 Casper, WY 82601 Distribution A. Approved for public release; Further dissemination unlimited. (Unclassified Unlimited) DOE/RMOTC/05.98001 Hydro-Balanced Stuffing Box Field Test Test Project Report Test Project Report Test Project Report Test Project Report Date Published: May 28, 1999 Leo A. Giangiacomo, P.E. PREPARED FOR THE U.S. DEPARTMENT OF ENERGY ROCKY MOUNTAIN OILFIELD TESTING CENTER 907 N. Poplar, Suite 150 Casper, WY 82601 Work Performed Under RMOTC ERIP Funding Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States

50

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

October 27, 2009 October 27, 2009 CX-000165: Categorical Exclusion Determination California County Contra Costa CX(s) Applied: A9, A11, B5.1 Date: 10/27/2009 Location(s): Contra Costa County, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 27, 2009 CX-000167: Categorical Exclusion Determination Texas County Montgomery CX(s) Applied: A9, A11, B5.1 Date: 10/27/2009 Location(s): Montgomery County, Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 27, 2009 CX-000169: Categorical Exclusion Determination Washington County Clark CX(s) Applied: A9, A11, B5.1 Date: 10/27/2009 Location(s): Clark County, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 27, 2009 CX-000168: Categorical Exclusion Determination

51

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

27, 2012 27, 2012 CX-008982: Categorical Exclusion Determination "Sacrificial Protective Coating Materials Regenerated In-Situ to Enable High Performance Membranes CX(s) Applied: A9, B3.6 Date: 08/27/2012 Location(s): California Offices(s): Golden Field Office" August 23, 2012 CX-009018: Categorical Exclusion Determination State Energy Program - Tennessee CX(s) Applied: A9, A11 Date: 08/23/2012 Location(s): Tennessee Offices(s): Golden Field Office August 22, 2012 CX-009013: Categorical Exclusion Determination Fiscal Year 2012-13 State Energy Program Formula Grant CX(s) Applied: A9, A11 Date: 08/22/2012 Location(s): Pennsylvania Offices(s): Golden Field Office August 22, 2012 CX-008979: Categorical Exclusion Determination Flexible Assembly Solar Technology CX(s) Applied: A9, B3.6, B5.17

52

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

, 2009 , 2009 CX-000173: Categorical Exclusion Determination New Mexico City Albuquerque CX(s) Applied: A9, B5.1 Date: 11/02/2009 Location(s): Albuquerque, New Mexico Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 2, 2009 CX-000172: Categorical Exclusion Determination Minnesota City St. Paul CX(s) Applied: A9, A11, B5.1 Date: 11/02/2009 Location(s): St. Paul, Minnesota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 2, 2009 CX-000171: Categorical Exclusion Determination California City Sacramento CX(s) Applied: A9, A11, B5.1 Date: 11/02/2009 Location(s): Sacramento, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 2, 2009 CX-000170: Categorical Exclusion Determination

53

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

6, 2010 6, 2010 CX-002574: Categorical Exclusion Determination Expansion of Manufacturing Capabilities to Create Photovoltaic Frames for Panels CX(s) Applied: B5.1 Date: 05/26/2010 Location(s): Germantown, Wisconsin Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2010 CX-002557: Categorical Exclusion Determination G.R. Silicate CX(s) Applied: B5.1 Date: 05/26/2010 Location(s): Hoquiam, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2010 CX-002480: Categorical Exclusion Determination State Energy Program: 21st Century Energy Grants- AAA Cab Service CX(s) Applied: B5.1 Date: 05/26/2010 Location(s): Phoenix, Arizona Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 25, 2010 CX-002417: Categorical Exclusion Determination

54

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

March 14, 2013 March 14, 2013 CX-010255: Categorical Exclusion Determination Home Energy Score Partner Implementation Model CX(s) Applied: A9 Date: 03/14/2013 Location(s): Washington Offices(s): Golden Field Office March 14, 2013 CX-010247: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant- Fort Lauderdale, Florida CX(s) Applied: B5.1, B5.16, B5.18, B5.23 Date: 03/14/2013 Location(s): Florida Offices(s): Golden Field Office March 14, 2013 CX-010245: Categorical Exclusion Determination Development of a 300 Degree, 200 Level, 3C Fiber Optic Downhole Seismic Receiver Array for Surveying and Monitoring of Geothermal Reservoirs CX(s) Applied: A9, B3.6 Date: 03/14/2013 Location(s): California Offices(s): Golden Field Office March 9, 2013 CX-010270: Categorical Exclusion Determination

55

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

10, 2010 10, 2010 CX-003718: Categorical Exclusion Determination Research for Developing Renewable Biofuels from Algae CX(s) Applied: B3.6 Date: 09/10/2010 Location(s): Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 10, 2010 CX-003696: Categorical Exclusion Determination Research and Development of a Low Cost Solar Thermal Collector CX(s) Applied: A9, B3.6 Date: 09/10/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 10, 2010 CX-003695: Categorical Exclusion Determination Baseload Electricity Solar Tower CX(s) Applied: A9, B3.6 Date: 09/10/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2010 CX-003725: Categorical Exclusion Determination

56

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

, 2010 , 2010 CX-002844: Categorical Exclusion Determination Military Veteran Wind Training Program CX(s) Applied: A9 Date: 07/01/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 24, 2010 CX-002857: Categorical Exclusion Determination Weather Incorporated Needs Development (W.I.N.D.) CX(s) Applied: A9 Date: 06/24/2010 Location(s): North Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 24, 2010 CX-002823: Categorical Exclusion Determination Nebraska College of Technical Agriculture Biomass Facility CX(s) Applied: B5.1 Date: 06/24/2010 Location(s): Curtis, Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 24, 2010 CX-002822: Categorical Exclusion Determination

57

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

1, 2012 1, 2012 CX-008237: Categorical Exclusion Determination 2013 Solar Decathlon and Energy Efficiency and Renewable Energy Showcase Event CX(s) Applied: A9 Date: 05/01/2012 Location(s): California Offices(s): Golden Field Office April 30, 2012 CX-008230: Categorical Exclusion Determination Northeast Photovoltaic Instructor Training Provider CX(s) Applied: A9, A11 Date: 04/30/2012 Location(s): New York Offices(s): Golden Field Office April 30, 2012 CX-008222: Categorical Exclusion Determination Development of Water Based, Critical Flow, Non-Vapor-Compression Cooling Cycle CX(s) Applied: B3.6 Date: 04/30/2012 Location(s): Kansas Offices(s): Golden Field Office April 30, 2012 CX-008221: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Program - State of Kansas

58

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

June 3, 2013 June 3, 2013 CX-010507: Categorical Exclusion Determination Development and Demonstration of Smart Grid Inverters for High-Penetration Photovoltaic Applications CX(s) Applied: A9, B3.6, B5.16 Date: 06/03/2013 Location(s): Hawaii Offices(s): Golden Field Office June 3, 2013 CX-010504: Categorical Exclusion Determination Installation of Additional Wind Turbine and Tower at NWTC Site 3.2 CX(s) Applied: B5.18 Date: 06/03/2013 Location(s): Colorado Offices(s): Golden Field Office June 3, 2013 CX-010503: Categorical Exclusion Determination Baseload Nitrate Salt Central Receiver Power Plant Design CX(s) Applied: A9, B3.6, B5.17 Date: 06/03/2013 Location(s): Colorado, Colorado Offices(s): Golden Field Office June 3, 2013 CX-010502: Categorical Exclusion Determination Sacramento Municipal Utility District: Community Renewable Energy

59

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

November 18, 2009 November 18, 2009 CX-000195: Categorical Exclusion Determination Washington County Pierce CX(s) Applied: A9, A11, B5.1 Date: 11/18/2009 Location(s): Pierce County, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000194: Categorical Exclusion Determination Ohio City Cincinnati CX(s) Applied: A9, A11, B5.1 Date: 11/18/2009 Location(s): Cincinnati, Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000193: Categorical Exclusion Determination New York City Buffalo CX(s) Applied: A9, B5.1 Date: 11/18/2009 Location(s): Buffalo, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000192: Categorical Exclusion Determination

60

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

3, 2010 3, 2010 CX-002381: Categorical Exclusion Determination Green Neighborhood Pilot Program - S CX(s) Applied: A9, A11, B5.1 Date: 05/13/2010 Location(s): Newark, New Jersey Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 13, 2010 CX-002378: Categorical Exclusion Determination Electric Vehicles and Charging Stations CX(s) Applied: B5.1 Date: 05/13/2010 Location(s): Saint Paul, Minnesota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 13, 2010 CX-002377: Categorical Exclusion Determination Offshore Wind Technology Data Collection Project CX(s) Applied: A9 Date: 05/13/2010 Location(s): Lake Michigan, Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 13, 2010 CX-002324: Categorical Exclusion Determination

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

September 28, 2012 September 28, 2012 CX-009152: Categorical Exclusion Determination Kansas State Energy Program CX(s) Applied: A9, A11 Date: 09/28/2012 Location(s): Kansas Offices(s): Golden Field Office September 26, 2012 CX-009434: Categorical Exclusion Determination Deployable Commercial Rooftop Solar Electric System CX(s) Applied: B5.15 Date: 09/26/2012 Location(s): New York Offices(s): Golden Field Office September 26, 2012 CX-009169: Categorical Exclusion Determination Virgin Islands State Energy Program CX(s) Applied: A9, A11 Date: 09/26/2012 Location(s): Virgin Islands Offices(s): Golden Field Office September 26, 2012 CX-009433: Categorical Exclusion Determination Center for Biomass Utilization Renewal of Grant CX(s) Applied: B3.6 Date: 09/26/2012 Location(s): North Dakota, Minnesota

62

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

14, 2012 14, 2012 CX-008997: Categorical Exclusion Determination Next Generation Solar Collectors for CSP CX(s) Applied: B3.6, B5.17 Date: 08/14/2012 Location(s): Minnesota Offices(s): Golden Field Office August 14, 2012 CX-009026: Categorical Exclusion Determination "A New Method for Low-cost Production of Titanium Alloys for Reducing Energy Consumption of Mechanical Systems CX(s) Applied: A9, B3.6 Date: 08/14/2012 Location(s): Utah Offices(s): Golden Field Office" August 14, 2012 CX-008987: Categorical Exclusion Determination Achieving Regional Energy Efficiency Potential in the Midwest CX(s) Applied: A9, A11 Date: 08/14/2012 Location(s): Illinois Offices(s): Golden Field Office August 13, 2012 CX-009008: Categorical Exclusion Determination Recovery Act State Energy Program Award for the State of Ohio - Revolving

63

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

December 13, 2012 December 13, 2012 CX-009571: Categorical Exclusion Determination Innovation Realization: Building and Supporting an Advanced Contract Manufacturing Cluster in Southeast Michigan CX(s) Applied: A9, B3.6 Date: 12/13/2012 Location(s): Michigan Offices(s): Golden Field Office December 13, 2012 CX-009559: Categorical Exclusion Determination Light-Duty Fuel Cell Electric Vehicle Validation Data CX(s) Applied: A9 Date: 12/13/2012 Location(s): California Offices(s): Golden Field Office December 12, 2012 CX-009587: Categorical Exclusion Determination City of Houston, Texas CX(s) Applied: B5.1 Date: 12/12/2012 Location(s): Texas Offices(s): Golden Field Office December 12, 2012 CX-009585: Categorical Exclusion Determination Feasibility Study and Design of "Brightfield" Solar Farm

64

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

February 14, 2013 February 14, 2013 CX-010234: Categorical Exclusion Determination Alternate Spacing Heating Systems Residential Cold Climate Heat Pump CX(s) Applied: A9, B1.31, B3.6, B5.1 Date: 02/14/2013 Location(s): Missouri Offices(s): Golden Field Office February 14, 2013 CX-010230: Categorical Exclusion Determination Miniaturized Air to Refrigerant Heat Exchangers CX(s) Applied: A9, B3.6 Date: 02/14/2013 Location(s): Maryland Offices(s): Golden Field Office February 14, 2013 CX-010218: Categorical Exclusion Determination Sustainable Energy for Business Districts in China CX(s) Applied: A9, A11 Date: 02/14/2013 Location(s): California Offices(s): Golden Field Office February 13, 2013 CX-010236: Categorical Exclusion Determination U.S. Offshore Wind: Removing Market Barriers CX(s) Applied: A9

65

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

7, 2010 7, 2010 CX-003856: Categorical Exclusion Determination Road Prison Geothermal Earth Coupled Heating, Ventilation and Air Conditioning (HVAC) Upgrade CX(s) Applied: B5.1 Date: 09/07/2010 Location(s): Escambia County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 7, 2010 CX-003857: Categorical Exclusion Determination Program Coordinator III - University of Georgia CX(s) Applied: B3.6 Date: 09/07/2010 Location(s): Georgia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 7, 2010 CX-003690: Categorical Exclusion Determination Solar Upgrade CX(s) Applied: A9, B5.1 Date: 09/07/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 2, 2010 CX-003854: Categorical Exclusion Determination

66

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

9, 2010 9, 2010 CX-001083: Categorical Exclusion Determination Optimal Ground-Source Heat Pump System Design CX(s) Applied: A9 Date: 03/09/2010 Location(s): New Jersey Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 8, 2010 CX-001091: Categorical Exclusion Determination High Temperature High Volume Lifting for Enhanced Geothermal Systems CX(s) Applied: A9, B3.6 Date: 03/08/2010 Location(s): Niskayuna, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 5, 2010 CX-001054: Categorical Exclusion Determination Aquantis 2.5 Megawatt Ocean Current Generation Device CX(s) Applied: A9, B3.6 Date: 03/05/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 5, 2010 CX-001099: Categorical Exclusion Determination

67

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

3, 2009 3, 2009 CX-000211: Categorical Exclusion Determination Wyoming Residential Renewable Energy Grants CX(s) Applied: B5.1 Date: 11/23/2009 Location(s): Wyoming Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 19, 2009 CX-000196: Categorical Exclusion Determination Alternative Crops and Biofuels Production CX(s) Applied: A9 Date: 11/19/2009 Location(s): Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 19, 2009 CX-000197: Categorical Exclusion Determination University Of South Dakota Catalysis Group for Alternative Energy CX(s) Applied: B3.6 Date: 11/19/2009 Location(s): Vermillion, South Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 18, 2009 CX-000191: Categorical Exclusion Determination

68

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

2, 2010 2, 2010 CX-003345: Categorical Exclusion Determination Integrated Renewable Energy and Campus Sustainability Initiative CX(s) Applied: A9 Date: 08/12/2010 Location(s): Decorah, Iowa Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 12, 2010 CX-003417: Categorical Exclusion Determination Energy Efficiency Projects CX(s) Applied: B5.1 Date: 08/12/2010 Location(s): Plover, Wisconsin Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 12, 2010 CX-003405: Categorical Exclusion Determination Blue Ridge Community Unit School District #18 CX(s) Applied: B5.1 Date: 08/12/2010 Location(s): Mansfield, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 11, 2010 CX-003358: Categorical Exclusion Determination

69

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

July 31, 2012 July 31, 2012 CX-009442: Categorical Exclusion Determination Cutters Grove, Anoka CX(s) Applied: A9, B5.19 Date: 07/31/2012 Location(s): Minnesota Offices(s): Golden Field Office July 26, 2012 CX-008606: Categorical Exclusion Determination Photovoltaic Solar Demonstration Project Energy Efficiency and Conservation Block Grant Program-City of EI Paso, Texas CX(s) Applied: A9, B3.14, B5.16 Date: 07/26/2012 Location(s): Texas Offices(s): Golden Field Office July 26, 2012 CX-008602: Categorical Exclusion Determination Oklahoma State Energy Program- Oklahoma Municipal Power Authority Large Systems Request AO CX(s) Applied: B5.19 Date: 07/26/2012 Location(s): Oklahoma, Oklahoma Offices(s): Golden Field Office July 26, 2012 CX-008580: Categorical Exclusion Determination Recovery Act Arizona Geological Survey Contributions to the National

70

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

March 25, 2013 March 25, 2013 CX-010250: Categorical Exclusion Determination The South Bend Public Transportation corporation Bus Operations Center and Maintenance Center, South Bend CX(s) Applied: A9, B5.22 Date: 03/25/2013 Location(s): Indiana Offices(s): Golden Field Office March 25, 2013 CX-010248: Categorical Exclusion Determination Hawaii Renewable Energy Development Venture CX(s) Applied: B5.18 Date: 03/25/2013 Location(s): Hawaii Offices(s): Golden Field Office March 21, 2013 CX-010246: Categorical Exclusion Determination South Table Mountain Denver West Parkway Improvements CX(s) Applied: A9, B1.33 Date: 03/21/2013 Location(s): Colorado Offices(s): Golden Field Office March 21, 2013 CX-010244: Categorical Exclusion Determination Community-Wide Public Facilities Energy Efficiency Retrofit and Biomass

71

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

5, 2010 5, 2010 CX-000917: Categorical Exclusion Determination Ocean Thermal Energy Converter Life Cycle Cost Analysis Date: 02/25/2010 Location(s): Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 25, 2010 CX-000916: Categorical Exclusion Determination Ocean Thermal Extractable Energy Visualization CX(s) Applied: A9 Date: 02/25/2010 Location(s): Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 25, 2010 CX-000911: Categorical Exclusion Determination Austin Solar City Partnership - Lyndon B. Johnson High School CX(s) Applied: B5.1 Date: 02/25/2010 Location(s): Austin, Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 24, 2010 CX-000907: Categorical Exclusion Determination

72

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

November 30, 2011 November 30, 2011 CX-007579: Categorical Exclusion Determination Geothermal Technology Advancement for Rapid Development of Resources in the U.S. CX(s) Applied: A9, B3.2, B3.11 Date: 11/30/2011 Location(s): Texas Offices(s): Golden Field Office November 30, 2011 CX-007578: Categorical Exclusion Determination Deep Geothermal Drilling Using Millimeter Wave Technology CX(s) Applied: A9, B3.6 Date: 11/30/2011 Location(s): Oklahoma Offices(s): Golden Field Office November 30, 2011 CX-007577: Categorical Exclusion Determination Scalable High-Efficiency Thin-Crystalline Silicon Cells Enabled by Light-Trapping Nanostructures CX(s) Applied: A9, B3.6 Date: 11/30/2011 Location(s): Massachusetts Offices(s): Golden Field Office November 29, 2011 CX-007576: Categorical Exclusion Determination

73

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

January 8, 2013 January 8, 2013 CX-010211: Categorical Exclusion Determination Detachment Faulting and Geothermal Resources - An Innovative Integrated Geological and Geophysical Investigation of Pearl Hot Spring, Nevada CX(s) Applied: A9, B3.1, B3.6 Date: 01/08/2013 Location(s): Nevada Offices(s): Golden Field Office January 8, 2013 CX-010210: Categorical Exclusion Determination Pt-based Bi-metallic Monolith Catalysts for Partial Upgrading of Microalgae Oil CX(s) Applied: A9, B3.6 Date: 01/08/2013 Location(s): New Jersey Offices(s): Golden Field Office January 7, 2013 CX-009923: Categorical Exclusion Determination Project Icebreaker CX(s) Applied: A9, B3.1 Date: 01/07/2013 Location(s): Ohio Offices(s): Golden Field Office January 7, 2013 CX-009921: Categorical Exclusion Determination

74

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

0, 2009 0, 2009 CX-000251: Categorical Exclusion Determination California City Riverside CX(s) Applied: A9, A11, B5.1 Date: 12/20/2009 Location(s): Riverside, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 18, 2009 CX-000250: Categorical Exclusion Determination WA County Kitsap CX(s) Applied: A9, A11, B5.1 Date: 12/18/2009 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2009 CX-000565: Categorical Exclusion Determination Recovery Act: Wind Blade Manufacturing Innovation CX(s) Applied: A9, B3.6 Date: 12/17/2009 Location(s): North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2009 CX-002152: Categorical Exclusion Determination

75

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

3, 2010 3, 2010 CX-000920: Categorical Exclusion Determination South Central Solar Consortium CX(s) Applied: A9, B5.1 Date: 02/23/2010 Location(s): Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 22, 2010 CX-000945: Categorical Exclusion Determination Solar Thermal Demonstration Project CX(s) Applied: B5.1, B2.5 Date: 02/22/2010 Location(s): Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 22, 2010 CX-000934: Categorical Exclusion Determination Development of Biofuels CX(s) Applied: B3.6 Date: 02/22/2010 Location(s): Las Vegas, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 22, 2010 CX-000931: Categorical Exclusion Determination Center for Biomass Utilization

76

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

14, 2011 14, 2011 CX-007422: Categorical Exclusion Determination Module-Integrated Power Converters Based on Universal Dock CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Texas Offices(s): Golden Field Office December 14, 2011 CX-007413: Categorical Exclusion Determination Transforming Photovoltaic Installations Toward Discpatchable, Schedulable Energy Solutions CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Oregon Offices(s): Golden Field Office December 13, 2011 CX-007418: Categorical Exclusion Determination Sidewalks to School CX(s) Applied: B1.13 Date: 12/13/2011 Location(s): South Carolina Offices(s): Golden Field Office December 13, 2011 CX-007426: Categorical Exclusion Determination Sharyland Independent School District CX(s) Applied: B5.16 Date: 12/13/2011

77

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

27, 2012 27, 2012 CX-007862: Categorical Exclusion Determination Northeast Photovoltaic Regional Training Provider CX(s) Applied: A9, A11, B3.14 Date: 01/27/2012 Location(s): Connecticut Offices(s): Golden Field Office January 27, 2012 CX-007861: Categorical Exclusion Determination SunShot New England · Open for Business CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Connecticut Offices(s): Golden Field Office January 27, 2012 CX-007860: Categorical Exclusion Determination Team Vanguard (Northern California) - Streamlining and Standardizing Permitting, Interconnection CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): California Offices(s): Golden Field Office January 27, 2012 CX-007859: Categorical Exclusion Determination Developing Solar Friendly Communities CX(s) Applied: A9, A11

78

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

September 6, 2012 September 6, 2012 CX-009147: Categorical Exclusion Determination Delaware State Energy Program Formula Grant Application CX(s) Applied: A9, A11 Date: 09/06/2012 Location(s): Delaware Offices(s): Golden Field Office September 6, 2012 CX-009138: Categorical Exclusion Determination American Samoa Government State Energy Program· Annual Grant CX(s) Applied: A9, A11 Date: 09/06/2012 Location(s): American Samoa Offices(s): Golden Field Office September 6, 2012 CX-009163: Categorical Exclusion Determination Ohio State Energy Program Year 2012 Formula Grants CX(s) Applied: A9, A11 Date: 09/06/2012 Location(s): Ohio Offices(s): Golden Field Office September 6, 2012 CX-009159: Categorical Exclusion Determination Montana Formaul State Energy Program CX(s) Applied: A9, A11 Date: 09/06/2012

79

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

31, 2012 31, 2012 CX-008560: Categorical Exclusion Determination Small Scale Electrical Power Generation from Heat Co-produced in Geothermal Fluids CX(s) Applied: A9, B3.6, B5.2, B5.15 Date: 05/31/2012 Location(s): Nevada Offices(s): Golden Field Office May 31, 2012 CX-008539: Categorical Exclusion Determination Scale Resistant Heat Exchangers for Low Temperature Geothermal Binary Cycle Power Plant CX(s) Applied: A9, B5.2, B5.15 Date: 05/31/2012 Location(s): California Offices(s): Golden Field Office May 23, 2012 CX-008532: Categorical Exclusion Determination Energize Missouri Homeowners Upgrades and Geothermal Malik CX(s) Applied: B5.19 Date: 05/23/2012 Location(s): Missouri Offices(s): Golden Field Office May 23, 2012 CX-008531: Categorical Exclusion Determination Energize Missouri Homeowners Upgrades and Geothermal Jura

80

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

27, 2011 27, 2011 CX-007536: Categorical Exclusion Determination Tucson Public Building Solar Arrays CX(s) Applied: A9, B5.16 Date: 12/27/2011 Location(s): Arizona Offices(s): Golden Field Office December 27, 2011 CX-007570: Categorical Exclusion Determination EL-11-002 East Marshall High School Geothermal Project CX(s) Applied: B5.19, B2.1 Date: 12/27/2011 Location(s): Iowa Offices(s): Golden Field Office December 21, 2011 CX-007417: Categorical Exclusion Determination Shift CX(s) Applied: B5.1 Date: 12/21/2011 Location(s): Pennsylvania Offices(s): Golden Field Office December 21, 2011 CX-007409: Categorical Exclusion Determination Silica Polymer Initiator Conformance Gel Applications in Geothermal Zonal Isolation CX(s) Applied: A9, B3.6 Date: 12/21/2011 Location(s): Oklahoma

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Microsoft Word - Sludge Test Area CX Determination Form12172012  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sludge Test Facility at the Transuranic (TRU) Waste Processing Center (TWPC) [CX-TWPC-13-0001] Sludge Test Facility at the Transuranic (TRU) Waste Processing Center (TWPC) [CX-TWPC-13-0001] Program or Field Office: Environmental Management - Oak Ridge Location(s) (City/County/State): Oak Ridge, Tennessee Proposed Action Description: The proposed action is to construct and operate a sludge test facility at the Transuranic (TRU) Waste Processing Center (TWPC) to conduct testing activities for sludge mobilization, mixing, and removal from the Melton Valley Storage Tanks (MVST). The testing is needed to develop appropriate, compliant treatment to a final waste form that will meet the Nevada National Security Site (NNSS) Waste Acceptance Criteria (WAC). This testing is needed for the mobilization, removal, and treatment of the sludge regardless of

82

DOE Approves Field Test for Promising Carbon Capture Technology |  

Broader source: Energy.gov (indexed) [DOE]

Approves Field Test for Promising Carbon Capture Technology Approves Field Test for Promising Carbon Capture Technology DOE Approves Field Test for Promising Carbon Capture Technology November 20, 2012 - 12:00pm Addthis Washington, DC - A promising post combustion membrane technology that can separate and capture 90 percent of the carbon dioxide (CO2) from a pulverized coal plant has been successfully demonstrated and received Department of Energy (DOE) approval to advance to a larger-scale field test. In an $18.75 million project funded by the American Recovery and Reinvestment Act of 2009, Membrane Technology and Research Inc. (MTR) and its partners tested the Polaris™ membrane system, which uses a CO2-selective polymeric membrane (micro-porous films which act as semi-permeable barriers to separate two different mediums) material and

83

Test of QED at critical field strength  

SciTech Connect (OSTI)

In a new experiment at the Final Focus Test Beam at SLAC, a low-emittance 46.6 GeV electron beam is brought into collisions with terawatt pulses of 1054 nm or 527 nm wavelength from a Nd:glass laser. Peak laser intensities of 10{sup 18} W/cm{sup 2} have been achieved corresponding to a value of 0.6 for the parameter {eta} = e{epsilon}/m{omega}{sub 0}c. In this case, an electron that crosses the center of the laser pulse has near-unit interaction probability. Results are presented for multiphoton Compton scattering in which an electron interacts with up to four laser photons, in agreement with theoretical calculations.

Bula, C. [Princeton Univ., NJ (United States)

1997-01-01T23:59:59.000Z

84

Well interference tests at the Cerro Prieto Geothermal Field  

SciTech Connect (OSTI)

Two well interference tests were carried out by the LBL at the Cerro Prieto geothermal field located in Baja California, Mexico, during 1978. The first test incorporated five wells located about 1 km south of the power plant. Standard analyses of the well interference test data yielded permeability estimates that are much higher than the values obtained from two-rate tests performed by the CFE during the development of production wells. 4 refs.

Schroeder, R.C.; Goranson, C.B.; Benson, S.M.; Lippmann, M.J.

1980-01-01T23:59:59.000Z

85

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

August 25, 2011 August 25, 2011 CX-006539: Categorical Exclusion Determination Boulder Wind Power Advanced Gearless Drivetrain CX(s) Applied: A9, B3.6 Date: 08/25/2011 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 25, 2011 CX-006509: Categorical Exclusion Determination Fairbanks Geothermal Energy Project CX(s) Applied: A9, B3.1, B5.12 Date: 08/25/2011 Location(s): Fairbanks, Alaska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 24, 2011 CX-006587: Categorical Exclusion Determination Novel Geothermal Development of Deep Sedimentary Systems in the United States CX(s) Applied: A9, B3.6 Date: 08/24/2011 Location(s): Salt Lake City, Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

86

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

March 27, 2012 March 27, 2012 CX-008208: Categorical Exclusion Determination Renewable Energy and Energy Efficiency Revolving Loan Program - Andreola Farms, Incorporated CX(s) Applied: B5.18 Date: 03/27/2012 Location(s): Nevada Offices(s): Golden Field Office March 26, 2012 CX-008207: Categorical Exclusion Determination Field Evaluation and Validation of Remote Wind Sensing Technologies - Shore-Based and Buoy Mounted Light LIDAR Systems CX(s) Applied: A9, A11, B3.1, B3.16 Date: 03/26/2012 Location(s): New Jersey Offices(s): Golden Field Office March 26, 2012 CX-008206: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Charlotte-Mecklenburg Police Department Parking Deck Electric Vehicle Charging Station CX(s) Applied: B5.23 Date: 03/26/2012 Location(s): North Carolina

87

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

16, 2010 16, 2010 CX-003707: Categorical Exclusion Determination Hawaii Renewable Energy Development Venture CX(s) Applied: A9, B3.6, B5.1 Date: 09/16/2010 Location(s): Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 16, 2010 CX-003701: Categorical Exclusion Determination Bio-Diesel Cellulosic Ethanol Research Project CX(s) Applied: A9 Date: 09/16/2010 Location(s): Hendry County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 16, 2010 CX-003699: Categorical Exclusion Determination Multi-Level Energy Storage and Controls for Large-Scale Wind Energy Integration CX(s) Applied: A9, B3.6 Date: 09/16/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

88

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

July 8, 2013 July 8, 2013 CX-010762: Categorical Exclusion Determination Recovery Act: State Geological Survey Contributions to the National Geothermal Data System, Nevada CX(s) Applied: B3.1, B3.6 Date: 07/08/2013 Location(s): Nevada Offices(s): Golden Field Office July 7, 2013 CX-010764: Categorical Exclusion Determination Notice of Proposed Rulemaking for New Energy Conservation Standards for Automatic Commercial Ice Makers CX(s) Applied: B5.1 Date: 07/09/2013 Location(s): Nationwide Offices(s): Golden Field Office July 3, 2013 CX-010694: Categorical Exclusion Determination Waste Heat-to-Power in Small-Scale Industry Using Scroll Expander for Organic Rankine Bottoming Cycle CX(s) Applied: A9, B3.6 Date: 07/03/2013 Location(s): Massachusetts Offices(s): Golden Field Office July 3, 2013

89

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

October 18, 2010 October 18, 2010 CX-004290: Categorical Exclusion Determination Greenfield Community College - Geothermal Project CX(s) Applied: B5.1 Date: 10/18/2010 Location(s): Massachusetts Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 18, 2010 CX-004288: Categorical Exclusion Determination Carbon Motors Corporation CX(s) Applied: B5.1 Date: 10/18/2010 Location(s): Connersville, Indiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office October 18, 2010 CX-004284: Categorical Exclusion Determination Recovery Act: Conducting a 3-Dimensional Converted Shear Wave Project CX(s) Applied: A9, B3.1, B3.7 Date: 10/18/2010 Location(s): Imperial County, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

90

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

24, 2011 24, 2011 CX-006023: Categorical Exclusion Determination Oregon Solar Highway CX(s) Applied: A9, B3.1 Date: 05/24/2011 Location(s): West Linn,Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 23, 2011 CX-005992: Categorical Exclusion Determination American Recovery and Reinvestment Act/State Energy Program - State of Louisiana Community Church Unitarian CX(s) Applied: B5.1 Date: 05/23/2011 Location(s): New Orleans, Louisiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2011 CX-005873: Categorical Exclusion Determination Placer County Biomass Utilization Pilot Project CX(s) Applied: A9 Date: 05/20/2011 Location(s): Placer County, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

91

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

7, 2010 7, 2010 CX-002536: Categorical Exclusion Determination American Recovery and Reinvestment Act Green Industry Business Development Program CX(s) Applied: B5.1 Date: 05/27/2010 Location(s): Chicago, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 27, 2010 CX-002538: Categorical Exclusion Determination Tangent Grant Application for American Recovery and Reinvestment Act Business Development Program CX(s) Applied: B5.1 Date: 05/27/2010 Location(s): Aurora, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 27, 2010 CX-002561: Categorical Exclusion Determination CAMPS (Center for Advanced Manufacturing Puget Sound) CX(s) Applied: A9, A11 Date: 05/27/2010 Location(s): Puget Sound, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

92

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

February 9, 2011 February 9, 2011 CX-005385: Categorical Exclusion Determination Low Cost High Concentration Photovoltaic Power Systems for Utility Power Generation -Sandia Site CX(s) Applied: B5.1 Date: 02/09/2011 Location(s): Albuquerque, New Mexico Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 8, 2011 CX-005165: Categorical Exclusion Determination 215 West Cabarrus Street Electric Vehicle Charging Station CX(s) Applied: B5.1 Date: 02/08/2011 Location(s): Raleigh, North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 8, 2011 CX-005164: Categorical Exclusion Determination Center City Recycling Project CX(s) Applied: B5.1 Date: 02/08/2011 Location(s): Charlotte, North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

93

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

18, 2011 18, 2011 CX-005878: Categorical Exclusion Determination Heritage Aquatic Complex - Solar Photovoltaic Project CX(s) Applied: B5.1 Date: 05/18/2011 Location(s): Henderson, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 18, 2011 CX-005875: Categorical Exclusion Determination Hawaii Hydrogen Power Park - Technology Validation of a Hydrogen Fueling System CX(s) Applied: B5.1 Date: 05/18/2011 Location(s): Honolulu, Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 17, 2011 CX-005930: Categorical Exclusion Determination Biofuel Micro-Refineries for Local Sustainability CX(s) Applied: A9, B3.1, B3.6 Date: 05/17/2011 Location(s): Memphis, Tennessee Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

94

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

January 4, 2011 January 4, 2011 CX-004858: Categorical Exclusion Determination Facility Conservation Improvement Program Loan CX(s) Applied: A9, A11, B5.1 Date: 01/04/2011 Location(s): Kansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 4, 2011 CX-004857: Categorical Exclusion Determination Building Operations Certification License CX(s) Applied: A9, A11, B5.1 Date: 01/04/2011 Location(s): Kansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 30, 2010 CX-004860: Categorical Exclusion Determination Watershed Scale Optimization to Meet Sustainable Cellulosic Energy Crop Demand CX(s) Applied: A9, B3.1 Date: 12/30/2010 Location(s): Purdue University, Indiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

95

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

January 21, 2010 January 21, 2010 CX-000625: Categorical Exclusion Determination New Membrane Electrode Assemblies Materials for Improved Direct Methanol Fuel Cell Performance, Durability and Cost CX(s) Applied: B3.6 Date: 01/21/2010 Location(s): Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 21, 2010 CX-000626: Categorical Exclusion Determination Advanced Direct Methanol Fuel Cell for Mobile Computing CX(s) Applied: B3.6 Date: 01/21/2010 Location(s): Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 21, 2010 CX-000630: Categorical Exclusion Determination A Partnership Model to Build Solar Training Capacity in the Midwest CX(s) Applied: A9, A11 Date: 01/21/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

96

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

14, 2010 14, 2010 CX-004743: Categorical Exclusion Determination New River Solar Thermal Hot Water Project CX(s) Applied: B5.1 Date: 12/14/2010 Location(s): Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 14, 2010 CX-004741: Categorical Exclusion Determination Ocean Thermal Energy Conversion Cold Water Pipe-Platform Subsystem Dynamic Interaction Validation CX(s) Applied: A9, B3.6 Date: 12/14/2010 Location(s): Manassas, Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 14, 2010 CX-004739: Categorical Exclusion Determination Evaluation of Wilcox Geothermal Reservoir and Demonstration of Geothermal Energy Production -Phase 1 CX(s) Applied: A9, B3.1 Date: 12/14/2010 Location(s): Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

97

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

0, 2010 0, 2010 CX-002559: Categorical Exclusion Determination Washington Credit Enhancement CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002492: Categorical Exclusion Determination Southern Illinois University Carbondale: Stone Center Geothermal CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Carbondale, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002491: Categorical Exclusion Determination Champaign Unit 4 School District: Westview Elementary School - Ground Source Heat Pump Project CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Champaign, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

98

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

4, 2011 4, 2011 CX-005750: Categorical Exclusion Determination State Energy Program- The Power Alternative- BioEnergy CX(s) Applied: B3.8, B5.1 Date: 05/04/2011 Location(s): Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 4, 2011 CX-005749: Categorical Exclusion Determination State Energy Program - Michigan State University - BioEnergy CX(s) Applied: B3.8, B5.1 Date: 05/04/2011 Location(s): Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 4, 2011 CX-005747: Categorical Exclusion Determination Biobased Materials Automotive Value Chain Market Development Analysis CX(s) Applied: A9 Date: 05/04/2011 Location(s): Boone County, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

99

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

1, 2010 1, 2010 CX-001503: Categorical Exclusion Determination Geothermal Technology Program CX(s) Applied: A9, B5.1 Date: 04/01/2010 Location(s): Nashville, Tennessee Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 1, 2010 CX-001497: Categorical Exclusion Determination Harsh Environment Silicon Carbide Sensor Technology for Geothermal Instrumentation CX(s) Applied: B3.6, A9 Date: 04/01/2010 Location(s): Berkeley, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 1, 2010 CX-001500: Categorical Exclusion Determination Forrest County Geothermal Energy Project CX(s) Applied: B3.1, A9 Date: 04/01/2010 Location(s): Forrest County, Mississippi Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

100

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

10, 2010 10, 2010 CX-001057: Categorical Exclusion Determination Characterizing Fractures in Geyser's Geothermal Field by Micro-Seismic Data, Using Soft Computing, Fractals, and Shear Wave Anisotropy CX(s) Applied: A9 Date: 03/10/2010 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 9, 2010 CX-001093: Categorical Exclusion Determination Finite Volume Based Computer Program for Ground Source Heat Pump System CX(s) Applied: A9 Date: 03/09/2010 Location(s): Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 9, 2010 CX-001061: Categorical Exclusion Determination Geothermal Academy: Focus Center for Data Collection, Analysis and Dissemination CX(s) Applied: A9, A11 Date: 03/09/2010 Location(s): Colorado

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

October 6, 2011 October 6, 2011 CX-006871: Categorical Exclusion Determination Hawaii Renewable Energy Development Venture CX(s) Applied: A9, B3.6, B5.1 Date: 10/06/2011 Location(s): Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2011 CX-006836: Categorical Exclusion Determination Alternative and Unconventional Energy Research and Development CX(s) Applied: B3.6, B3.8 Date: 09/29/2011 Location(s): Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2011 CX-006869: Categorical Exclusion Determination National Agriculture Based Lubricants Center CX(s) Applied: A9, B3.6 Date: 09/29/2011 Location(s): Waterloo, Iowa Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2011

102

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

September 15, 2011 September 15, 2011 CX-006800: Categorical Exclusion Determination Solar Grade Silicon from Agricultural Byproducts CX(s) Applied: B3.6 Date: 09/15/2011 Location(s): Ann Arbor, Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 13, 2011 CX-006798: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Program: Activity 4 - Government Building Demonstration Projects CX(s) Applied: B5.1 Date: 09/13/2011 Location(s): Louisville, Kentucky Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2011 CX-006807: Categorical Exclusion Determination Energy Production with Innovative Methods of Geothermal Heat Recovery CX(s) Applied: A9 Date: 09/09/2011 Location(s): Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

103

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

1, 2010 1, 2010 CX-001535: Categorical Exclusion Determination County of Miami-Dade, Florida Energy Efficiency and Conservation Block Grant CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Miami-Dade County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001534: Categorical Exclusion Determination Lake County, Florida Energy Efficiency and Conservation Block Grant Statement of Work (S) CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Lake County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001532: Categorical Exclusion Determination City of Orlando - Statement of Work (S) CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Orlando, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

104

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

4, 2010 4, 2010 CX-003228: Categorical Exclusion Determination Vermont Biofuels Initiative: Bournes CX(s) Applied: B3.6 Date: 08/04/2010 Location(s): Vermont Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 4, 2010 CX-003226: Categorical Exclusion Determination Parris Island Wind Resource Assessment; National Renewable Energy Laboratory Tracking Number 10-032 CX(s) Applied: A9, B3.1 Date: 08/04/2010 Location(s): Parris Island, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 4, 2010 CX-003225: Categorical Exclusion Determination Engenuity South Carolina Commercialization and Entrepreneurial Training Project CX(s) Applied: A9 Date: 08/04/2010 Location(s): Columbia, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

105

Field test of the PNNL Automated Radioxenon Sampler/Analyzer (ARSA)  

SciTech Connect (OSTI)

As part of the requirements of the Comprehensive Test Ban Treaty (CTBT), the Automated Radioxenon/Sampler Analyzer (ARSA) was designed and engineered by the Pacific Northwest National Laboratory (PNNL). The instrument is to provide near real-time detection and measurement of the radioxenons released into the atmosphere after a nuclear test. Forty-six field tests, designed to determine the performance of the ARSA prototype under simulated field conditions, were conducted at EML from March to December 1997. This final report contains detailed results of the tests with recommendations for improvements in instrument performance.

Lagomarsino, R.J.; Ku, E.; Latner, N.; Sanderson, C.G.

1998-07-01T23:59:59.000Z

106

Method of determining interwell oil field fluid saturation distribution  

DOE Patents [OSTI]

A method of determining the oil and brine saturation distribution in an oil field by taking electrical current and potential measurements among a plurality of open-hole wells geometrically distributed throughout the oil field. Poisson's equation is utilized to develop fluid saturation distributions from the electrical current and potential measurement. Both signal generating equipment and chemical means are used to develop current flow among the several open-hole wells.

Donaldson, Erle C. (Bartlesville, OK); Sutterfield, F. Dexter (Bartlesville, OK)

1981-01-01T23:59:59.000Z

107

Small-Scale Carbon Sequestration Field Test Yields Significant Lessons  

Broader source: Energy.gov (indexed) [DOE]

Small-Scale Carbon Sequestration Field Test Yields Significant Small-Scale Carbon Sequestration Field Test Yields Significant Lessons Learned Small-Scale Carbon Sequestration Field Test Yields Significant Lessons Learned May 20, 2009 - 1:00pm Addthis Washington, DC - The Midwest Regional Carbon Sequestration Partnership, one of seven regional partnerships created by the U.S. Department of Energy (DOE) to advance carbon capture and storage technologies, has completed a preliminary geologic characterization and sequestration field test at FirstEnergy's R. E. Burger Plant near Shadyside, Ohio. The project provided significant geologic understanding and "lessons learned" from a region of the Appalachian Basin with few existing deep well penetrations for geologic characterization. The initial targets for the geologic storage of carbon dioxide (CO2) at the

108

Design and Installation of a Disposal Cell Cover Field Test ...  

Broader source: Energy.gov (indexed) [DOE]

through March 3, 2011, Phoenix, Arizona. C.H. Benson, W.J. Waugh, W.H. Albright, G.M. Smith, R.P. Bush Design and Installation of a Disposal Cell Cover Field Test More Documents...

109

Concept tests: Wind tunnel tests in controlled wind Comparison tests: Free field comparison to 3D sonic anemometer  

E-Print Network [OSTI]

: Measurements with three 1D sonics and one azimuth sensor Advantage: Pure virginal wind in front of wind turbine, and for wind, power performance and loads verification Full scale tests: Measurements on 3,6MW wind turbineConcept tests: Wind tunnel tests in controlled wind Comparison tests: Free field comparison to 3D

110

The field test was conducted in the Prairie  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

field test was conducted in the Prairie Pothole Region - an area field test was conducted in the Prairie Pothole Region - an area that stretches from central Iowa into Northern Alberta, Canada, and contains thousands of shallow wetlands formed by retreating glaciers approximately 10,000 years ago. Terrestrial carbon capture and storage (CCS) involves plant removal of CO 2 from the atmosphere using photosynthesis and storing the greenhouse gas (GHG) in biomass

111

NETL: Carbon Storage - Small-Scale Field Tests  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Small-Scale Field Tests Small-Scale Field Tests Carbon Storage Small-Scale Field Tests The U.S. Department of Energy (DOE) is supporting a number of small-scale field tests (injection of less than 500,000 million metric tons of CO2 per year) to explore various geologic CO2 storage opportunities within the United States and portions of Canada. DOE's small-scale field test efforts are designed to demonstrate that regional reservoirs have the capability to store thousands of years of CO2 emissions and provide the basis for larger volume, commercial-scale CO2 tests. The field studies are focused on developing better understanding 11 major types of geologic storage reservoir classes, each having their own unique opportunities and challenges. Understanding these different storage classes provides insight into how the systems influence fluids flow within these systems today, and how CO2 in geologic storage would be anticipated to flow in the future. The different storage formation classes include: deltaic, coal/shale, fluvial, alluvial, strandplain, turbidite, eolian, lacustrine, clastic shelf, carbonate shallow shelf, and reef. Basaltic interflow zones are also being considered as potential reservoirs. These storage reservoirs contain fluids that may include natural gas, oil, or saline water; any of which may impact CO2 storage differently. The data gathered during these small-scale tests provides valuable information regarding specific formations that have historically not been evaluated for the purpose of CO2 storage. The Carbon Storage Program strategy includes an established set of field test objectives applicable to the small-scale projects:

112

A New Seismic Data System for Determining Nuclear Test Yields At the Nevada Test Site  

SciTech Connect (OSTI)

An important capability in conducting underground nuclear tests is to be able to determine the nuclear test yield accurately within hours after a test. Due to a nuclear test moratorium, the seismic method that has been used in the past has not been exercised since a non-proliferation high explosive test in 1993. Since that time, the seismic recording system and the computing environment have been replaced with modern equipment. This report describes the actions that have been taken to preserve the capability for determining seismic yield, in the event that nuclear testing should resume. Specifically, this report describes actions taken to preserve seismic data, actions taken to modernize software, and actions taken to document procedures. It concludes with a summary of the current state of the data system and makes recommendations for maintaining this system in the future.

LEE, JONATHAN W.

2001-11-01T23:59:59.000Z

113

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

9, 2010 9, 2010 CX-001958: Categorical Exclusion Determination Utah State Energy Program (SEP) American Recovery and Reinvestment Act (ARRA) - Competitive Grants for Renewable Energy CX(s) Applied: A1, B5.1 Date: 02/19/2010 Location(s): Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 19, 2010 CX-001076: Categorical Exclusion Determination Indiana State American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant (T) CX(s) Applied: A9, A11, B5.1 Date: 02/19/2010 Location(s): Indiana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 19, 2010 CX-001113: Categorical Exclusion Determination State of Wisconsin American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant (T)

114

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

June 7, 2010 June 7, 2010 CX-002683: Categorical Exclusion Determination Cincinnati City American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant Act 4 (Ohio River Trail - Corbin to Collins) CX(s) Applied: A9, A11, B5.1 Date: 06/07/2010 Location(s): Cincinnati, Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 7, 2010 CX-002678: Categorical Exclusion Determination South District County Waster and Sewer Department - lnstallation of Co-Generation Units 4 & 5 and Landfill Gas Pipeline Construction CX(s) Applied: B5.1 Date: 06/07/2010 Location(s): Miami-Dade County, Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 3, 2010 CX-002453: Categorical Exclusion Determination Commercialization of New Lattice Matched Multi-Junction; National Renewable

115

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

20, 2010 20, 2010 CX-002046: Categorical Exclusion Determination Chester County (Pennsylvania): Chester Valley Trail Extension - American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant CX(s) Applied: B5.1 Date: 04/20/2010 Location(s): Chester County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 20, 2010 CX-002045: Categorical Exclusion Determination Oregon Energy Efficiency and Conservation Block Grant: Video Conferencing CX(s) Applied: B1.7, B5.1 Date: 04/20/2010 Location(s): Lakeview County, Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 20, 2010 CX-002043: Categorical Exclusion Determination Ohio State American Recovery and Reinvestment Act - Energy Efficiency and

116

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

30, 2010 30, 2010 CX-003506: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act: Quantum Solar Photovoltaic Module Manufacturing Plant CX(s) Applied: B5.1 Date: 08/30/2010 Location(s): Irvine, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 30, 2010 CX-003505: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act: Calisolar's Solar Manufacturing Capacity Expansion CX(s) Applied: B1.31, B5.1 Date: 08/30/2010 Location(s): Sunnyvale, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 30, 2010 CX-003860: Categorical Exclusion Determination State Energy Program (SEP) American Recovery and Reinvestment Act (ARRA)

117

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

8, 2010 8, 2010 CX-003402: Categorical Exclusion Determination Corrugated Membrane and Fuel Cell Structures CX(s) Applied: B3.6 Date: 08/16/2010 Location(s): New Castle, Delaware Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 17, 2010 CX-003497: Categorical Exclusion Determination Research on Fuel Cell Powered by Hydrogen from Biomass to Provide Clean Energy for Remote Farms away from Electric Grid CX(s) Applied: A9 Date: 08/17/2010 Location(s): Farmingdale, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 17, 2010 CX-003493: Categorical Exclusion Determination Recovery Act: Innovative Exploration Techniques for Geothermal Assessment at Jemez Pueblo, New Mexico CX(s) Applied: B3.1 Date: 08/17/2010 Location(s): New Mexico

118

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

16, 2010 16, 2010 CX-001710: Categorical Exclusion Determination Young Women's Christian Association (YWCA) Family Village at Issaquah CX(s) Applied: B2.1, B2.5, B5.1 Date: 04/16/2010 Location(s): Issaquah, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 16, 2010 CX-001709: Categorical Exclusion Determination Application Titled: Integration of Noise and Coda Correlation Data CX(s) Applied: A9 Date: 04/16/2010 Location(s): Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 16, 2010 CX-001708: Categorical Exclusion Determination Irma Charing Cross Sidewalk Project American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant CX(s) Applied: B5.1 Date: 04/16/2010 Location(s): Irmo, South Carolina

119

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

1, 2010 1, 2010 CX-002563: Categorical Exclusion Determination Clark Public Utilities CX(s) Applied: B5.1 Date: 05/21/2010 Location(s): Camas, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002414: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Award Adair County, Oklahoma Materials Recycling Project CX(s) Applied: B5.1 Date: 05/20/2010 Location(s): Watts, Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 20, 2010 CX-002385: Categorical Exclusion Determination Ohio State American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant - Act 1 (County Building Retrofits) Lucas County I - Boiler Interconnection CX(s) Applied: A9, A11, B5.1

120

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

September 30, 2010 September 30, 2010 CX-004033: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Carver Ground-Mounted Solar Photovoltaic CX(s) Applied: B5.1 Date: 09/30/2010 Location(s): Carver, Massachusetts Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 30, 2010 CX-004011: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Energy Efficient Programs for Small Cities and Counties: 50 Kilowatt Wind Turbine to Power City of Burdette Facilities CX(s) Applied: B5.1 Date: 09/30/2010 Location(s): Burdette, Arkansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 29, 2010 CX-004094: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Washington Stewart

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

0, 2010 0, 2010 CX-001741: Categorical Exclusion Determination Pennsylvania Conservation Works - Geothermal Systems - American Recovery and Reinvestment Act-Energy Efficiency and Conservation Block Grant CX(s) Applied: B5.1 Date: 03/30/2010 Location(s): Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 30, 2010 CX-001740: Categorical Exclusion Determination Berks County, Pennsylvania, Boiler Plant Improvements - American Recovery and Reinvestment Act-Energy Efficiency and Conservation Block Grant CX(s) Applied: B2.5, B5.1 Date: 03/30/2010 Location(s): Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 30, 2010 CX-001583: Categorical Exclusion Determination Dynamic Energy Consumption Management of Routing Telecom and Data Centers

122

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

0, 2010 0, 2010 CX-001090: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - State of New York American Recovery and Reinvestment Act (T) CX(s) Applied: A9, A11, B5.1 Date: 02/10/2010 Location(s): New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 10, 2010 CX-001101: Categorical Exclusion Determination Luzerne County (Pennsylvania), EECS, All Activities - American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant (S) Date: 02/10/2010 Location(s): Luzerne County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 10, 2010 CX-001938: Categorical Exclusion Determination Renewable Energy Enterprise Zones (REEZ) Boise County Woody Biomass

123

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

17, 2010 17, 2010 CX-002661: Categorical Exclusion Determination Monarch Warren County Turbine Project CX(s) Applied: B3.1, A9 Date: 03/17/2010 Location(s): Warren County, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 17, 2010 CX-001241: Categorical Exclusion Determination Wellford Landfill Methane and Greenhouse Gas to Energy Project CX(s) Applied: A9 Date: 03/17/2010 Location(s): Spartanburg County, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 16, 2010 CX-001918: Categorical Exclusion Determination Market 5: Promote the Use of Green and Renewable Energy Generation Facilities, Products, and its Supply Chain for the Purpose of Reducing Greenhouse Gases CX(s) Applied: B1.31, B5.1 Date: 03/16/2010

124

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

January 28, 2010 January 28, 2010 CX-000642: Categorical Exclusion Determination Recovery Act: North Little Rock Hydroelectric Department Hydroelectric Facility Improvement Project: Automated Intake Clearing Equipment and Material; Management CX(s) Applied: A9 Date: 01/28/2010 Location(s): North Little Rock, Arkansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 28, 2010 CX-000647: Categorical Exclusion Determination K-12 Energy Efficiency Project CX(s) Applied: B5.1 Date: 01/28/2010 Location(s): Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 28, 2010 CX-000651: Categorical Exclusion Determination Deployment of Innovative Energy Efficiency and Renewable Energy - Buildings CX(s) Applied: B5.1 Date: 01/28/2010

125

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

22, 2010 22, 2010 CX-004834: Categorical Exclusion Determination Scott Jenkins Parking Lot Light Emitting Diode Lighting with Solar Arrays and On?site Electric Vehicle Charging Stations CX(s) Applied: B5.1 Date: 12/22/2010 Location(s): Loudoun County, Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 22, 2010 CX-004832: Categorical Exclusion Determination Large Scale Solar - Roof Mounted - Red Rock Canyon School CX(s) Applied: B5.1 Date: 12/22/2010 Location(s): Saint George, Utah Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 22, 2010 CX-004831: Categorical Exclusion Determination Midsize Wind Turbine Designed and Manufactured in the United States of America (BUDGET PERIOD 1) CX(s) Applied: A9 Date: 12/22/2010

126

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

31, 2011 31, 2011 CX-005998: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Buckman United States of America - Tier II: Insulation Project and Boiler Control System CX(s) Applied: B5.1 Date: 05/31/2011 Location(s): Cadet, Missouri Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 31, 2011 CX-005989: Categorical Exclusion Determination Ground Source Heat Pump Retrofit CX(s) Applied: B5.1 Date: 05/31/2011 Location(s): Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 31, 2011 CX-005951: Categorical Exclusion Determination Silicon Valley Technology Center Solar: A Photovoltaic Manufacturing Development Facility CX(s) Applied: B3.6, B5.1 Date: 05/31/2011 Location(s): San Jose, California

127

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

1, 2010 1, 2010 CX-002359: Categorical Exclusion Determination Validation of Innovative Exploration Technologies at the Colado, Nevada, Geothermal Prospect CX(s) Applied: B3.1, A9 Date: 05/11/2010 Location(s): Colado, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 10, 2010 CX-002368: Categorical Exclusion Determination Puget Sound Tidal Energy Demonstration Project: Environmental and Permitting Activities CX(s) Applied: B3.1, B3.3, A9 Date: 05/10/2010 Location(s): Puget Sound, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 10, 2010 CX-002284: Categorical Exclusion Determination Environmental Effects of Sediment Transport Alteration and Impacts on Protected Species: Edgartown Tidal Energy Project

128

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

6, 2011 6, 2011 CX-005429: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act -Solid Waste Authority of Central Ohio CX(s) Applied: B5.1 Date: 03/16/2011 Location(s): Grove City, Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 16, 2011 CX-005425: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Brookhaven New York: Henrietta Acampora Recreation Center CX(s) Applied: B5.1 Date: 03/16/2011 Location(s): Brookhaven, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 16, 2011 CX-005412: Categorical Exclusion Determination State Energy Program Passive Solar Hoophouse Implementation CX(s) Applied: B5.1 Date: 03/16/2011 Location(s): Michigan

129

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

9, 2011 9, 2011 CX-006797: Categorical Exclusion Determination Chicago Climate Action Plan Advanced Transportation Technologies Initiative CX(s) Applied: A9, B5.1 Date: 09/09/2011 Location(s): Chicago, Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2011 CX-006782: Categorical Exclusion Determination Advanced Horizontal Well Recirculation Systems for Geothermal Energy Recovery in Sedimentary and Crystalline Formations CX(s) Applied: A9, B3.6 Date: 09/09/2011 Location(s): Irvine, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 9, 2011 CX-006781: Categorical Exclusion Determination Community-Wide Public Facilities Energy Efficiency and Biomass Heating Conversion Project CX(s) Applied: B5.1

130

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

, 2010 , 2010 CX-004368: Categorical Exclusion Determination Pascal Senior Center Energy Efficiency Project CX(s) Applied: B5.1 Date: 11/01/2010 Location(s): Anne Arundel County, Maryland Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 1, 2010 CX-004367: Categorical Exclusion Determination Small Cities and Counties Initiative: Pendleton County Geothermal CX(s) Applied: B5.1 Date: 11/01/2010 Location(s): Pendleton County, Kentucky Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 1, 2010 CX-004365: Categorical Exclusion Determination Small Business, Non-Profit and Higher Education Grant Program: Greater Elkhart Chamber of Commerce Ground Source Heat Pump CX(s) Applied: B5.1 Date: 11/01/2010 Location(s): Elkhart, Indiana

131

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

, 2011 , 2011 CX-005377: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act -SIRTI -NuElement Bio Aviation Fuel Battery-Extender Auxiliary Power Unit Demonstration at Boeing Commercial Airplanes' System Concept Center CX(s) Applied: A9, B5.1 Date: 03/01/2011 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 28, 2011 CX-005376: Categorical Exclusion Determination Design and Implementation of Geothermal Energy Systems at West Chester University - 2 CX(s) Applied: A9, B5.1, B5.2 Date: 02/28/2011 Location(s): Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 28, 2011 CX-005375: Categorical Exclusion Determination Design and Implementation of Geothermal Energy Systems at West Chester

132

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

June 17, 2011 June 17, 2011 CX-006093: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Onesteel Grinding Systems - Steel Reheat Furnace Recuperator Energy Efficiency Retrofit CX(s) Applied: B3.6, B5.1 Date: 06/17/2011 Location(s): Kansas City, Missouri Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 17, 2011 CX-006090: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Mississippi Lime - Variable Frequency Drive and Fan Upgrade at Peerless Plant CX(s) Applied: B3.6, B5.1 Date: 06/17/2011 Location(s): St. Genevieve, Missouri Office(s): Energy Efficiency and Renewable Energy, Golden Field Office June 17, 2011 CX-006086: Categorical Exclusion Determination Missouri Independent Energy Efficiency Program: Elantas PDG Inc. -

133

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

15, 2010 15, 2010 CX-001820: Categorical Exclusion Determination City of Houston, Texas (TX) Energy Efficiency and Conservation Block Grant (EECBG) CX(s) Applied: A9, A11, B5.1 Date: 04/15/2010 Location(s): Houston, Texas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001536: Categorical Exclusion Determination City of Bonners Ferry Methane Reduction CX(s) Applied: A9, A11, B5.1 Date: 04/15/2010 Location(s): Bonners Ferry, Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001553: Categorical Exclusion Determination Charlotte Activities 1, 4, 5, 6, 7, 10, 11, 17, and 19 American Recovery and Reinvestment Act (ARRA)-Energy Efficiency and Conservation Block Grant (EECBG) Strategy-Only CX(s) Applied: B2.5, A9, A11, B5.1

134

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

December 28, 2009 December 28, 2009 CX-000269: Categorical Exclusion Determination High Penetration Solar Deployment CX(s) Applied: A9, B3.1 Date: 12/28/2009 Location(s): California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 28, 2009 CX-000268: Categorical Exclusion Determination High Efficiency, Low-Cost, Multijunction Solar Cells Based on Epitaxial Liftoff and Wafer Bonding; National Renewable Energy Laboratory Tracking Number 09-041 CX(s) Applied: B3.6 Date: 12/28/2009 Location(s): Illinois Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 28, 2009 CX-000267: Categorical Exclusion Determination A New Analytic-Adaptive Model for Enhanced Geothermal System Assessment, Development and Management Support CX(s) Applied: A9

135

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

24, 2011 24, 2011 CX-005322: Categorical Exclusion Determination Subtask 2.1 Maui Site: National Marine Renewable Energy Center in Hawaii CX(s) Applied: A9, B3.1 Date: 02/24/2011 Location(s): Maui, Hawaii Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 16, 2011 CX-005219: Categorical Exclusion Determination Van Dyk Dairy Anaerobic Digester CX(s) Applied: A9, B3.8, B5.1 Date: 02/16/2011 Location(s): Lynden, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 16, 2011 CX-005217: Categorical Exclusion Determination State Energy Program American Reinvestment and Recovery Act Sirti -Demand Energy -Energy Storage System Tied to Solar on Commercial Facility CX(s) Applied: A9, B1.7, B5.1 Date: 02/16/2011 Location(s): Liberty Lake, Washington

136

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

15, 2010 15, 2010 CX-001924: Categorical Exclusion Determination Market Title E: Renewable Energy and Energy Efficiency Revolving Loan Program and Market Title B: Energy Efficiency and Renewable Energy for Schools CX(s) Applied: A9, A11, B5.1 Date: 03/15/2010 Location(s): Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 15, 2010 CX-001238: Categorical Exclusion Determination Multiparameter Fiber Optic Sensing System for Monitoring Enhanced Geothermal Systems CX(s) Applied: A9, B3.6 Date: 03/15/2010 Location(s): Niskayuna, New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 15, 2010 CX-001237: Categorical Exclusion Determination Silver Peak Innovative Exploration Project CX(s) Applied: A9, B3.1, B5.1 Date: 03/15/2010

137

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

December 17, 2010 December 17, 2010 CX-004835: Categorical Exclusion Determination Electric Vehicle Charging Stations City of Mill Creek CX(s) Applied: B5.1 Date: 12/17/2010 Location(s): Mill Creek, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2010 CX-004795: Categorical Exclusion Determination Wave-Actuated Power Take Off Device for Electricity Generation CX(s) Applied: A9, B3.6 Date: 12/17/2010 Location(s): Boston, Massachusetts Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 17, 2010 CX-004791: Categorical Exclusion Determination Hydroelectric Facility Improvement Project? Automated Intake Cleaning Equipment and Materials Management CX(s) Applied: B5.1 Date: 12/17/2010 Location(s): North Little Rock, Arkansas

138

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

15, 2010 15, 2010 CX-001596: Categorical Exclusion Determination Recovery Act: County of Greenville, South Carolina (SC) Energy Efficiency and Conservation Block Grant (EECBG) American Recovery and Reinvestment Act (AARA)-EECBG CX(s) Applied: B5.1 Date: 04/15/2010 Location(s): County of Greenville, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001590: Categorical Exclusion Determination Pennsylvania State, Ground Mount Solar System - American Recovery and Reinvestment Act (ARRA) - Energy Efficiency and Conservation Block Grant (EECBG) CX(s) Applied: A9, A11, B5.1 Date: 04/15/2010 Location(s): Bucks County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 15, 2010 CX-001588: Categorical Exclusion Determination

139

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

8, 2010 8, 2010 CX-001936: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant Small Cities and Counties Initiative (Subgrant): Livingston County Geothermal Project CX(s) Applied: B5.1 Date: 04/28/2010 Location(s): Livingston County, Kentucky Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 28, 2010 CX-001824: Categorical Exclusion Determination Recovery Act: District Energy Southwest 40th Street Thermal Plant CX(s) Applied: A9, B5.1 Date: 04/28/2010 Location(s): Lancaster County, Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office April 28, 2010 CX-002124: Categorical Exclusion Determination Herd Company Feedlot Renewable Biomass Waste to Energy Production Facility CX(s) Applied: B2.5, B5.1

140

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

26, 2011 26, 2011 CX-006025: Categorical Exclusion Determination Regional Biomass Feedstock Partnership CX(s) Applied: B3.8, B5.1 Date: 05/26/2011 Location(s): Champaign County, South Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2011 CX-006022: Categorical Exclusion Determination Oregon State University Cascades Campus Ground Source Heat Pump Project CX(s) Applied: B5.1 Date: 05/26/2011 Location(s): Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office May 26, 2011 CX-006004: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant/American Recovery and Reinvestment Act: Akron City Activity 1 Community Business and Non-Profit Energy Efficiency Grant Program and Activity 12 Energy Efficient Solar

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

1, 2010 1, 2010 CX-001562: Categorical Exclusion Determination City of Omaha Statement of Work National Environmental Policy Act Template CX(s) Applied: A9, A11, B5.1 Date: 03/31/2010 Location(s): Omaha, Nebraska Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001561: Categorical Exclusion Determination Solar Light-Emitting Diode Street Lights for Phase 1A Downtown Greenway- American Recovery and Reinvestment Act Energy Efficiency and Conservation Block Grant Strategy Only CX(s) Applied: B5.1 Date: 03/31/2010 Location(s): Greensboro, North Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 31, 2010 CX-001560: Categorical Exclusion Determination Hydroelectric turbine at Water Treatment Plant American Recovery and

142

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

6, 2010 6, 2010 CX-004466: Categorical Exclusion Determination Washington State Biofuels Industry Development CX(s) Applied: B3.6 Date: 11/16/2010 Location(s): Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 16, 2010 CX-004459: Categorical Exclusion Determination Wind and Water -Delos-Reyes Morrow Pressure: Simple, Scalable, and Submerged CX(s) Applied: A9 Date: 11/16/2010 Location(s): Oregon Office(s): Energy Efficiency and Renewable Energy, Golden Field Office November 16, 2010 CX-004458: Categorical Exclusion Determination Cincinnati City American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant Act 3 (Mill Creek Restoration Project - Phase 3) CX(s) Applied: A9, A11, B5.1 Date: 11/16/2010 Location(s): Cincinnati, Ohio

143

Automated particulate sampler field test model operations guide  

SciTech Connect (OSTI)

The Automated Particulate Sampler Field Test Model Operations Guide is a collection of documents which provides a complete picture of the Automated Particulate Sampler (APS) and the Field Test in which it was evaluated. The Pacific Northwest National Laboratory (PNNL) Automated Particulate Sampler was developed for the purpose of radionuclide particulate monitoring for use under the Comprehensive Test Ban Treaty (CTBT). Its design was directed by anticipated requirements of small size, low power consumption, low noise level, fully automatic operation, and most predominantly the sensitivity requirements of the Conference on Disarmament Working Paper 224 (CDWP224). This guide is intended to serve as both a reference document for the APS and to provide detailed instructions on how to operate the sampler. This document provides a complete description of the APS Field Test Model and all the activity related to its evaluation and progression.

Bowyer, S.M.; Miley, H.S.

1996-10-01T23:59:59.000Z

144

The use of computed radiography plates to determine light and radiation field coincidence  

SciTech Connect (OSTI)

Purpose: Photo-stimulable phosphor computed radiography (CR) has characteristics that allow the output to be manipulated by both radiation and optical light. The authors have developed a method that uses these characteristics to carry out radiation field and light field coincidence quality assurance on linear accelerators.Methods: CR detectors from Kodak were used outside their cassettes to measure both radiation and light field edges from a Varian linear accelerator. The CR detector was first exposed to a radiation field and then to a slightly smaller light field. The light impinged on the detector's latent image, removing to an extent the portion exposed to the light field. The detector was then digitally scanned. A MATLAB-based algorithm was developed to automatically analyze the images and determine the edges of the light and radiation fields, the vector between the field centers, and the crosshair center. Radiographic film was also used as a control to confirm the radiation field size.Results: Analysis showed a high degree of repeatability with the proposed method. Results between the proposed method and radiographic film showed excellent agreement of the radiation field. The effect of varying monitor units and light exposure time was tested and found to be very small. Radiation and light field sizes were determined with an uncertainty of less than 1 mm, and light and crosshair centers were determined within 0.1 mm.Conclusions: A new method was developed to digitally determine the radiation and light field size using CR photo-stimulable phosphor plates. The method is quick and reproducible, allowing for the streamlined and robust assessment of light and radiation field coincidence, with no observer interpretation needed.

Kerns, James R. [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 and Graduate School of Biomedical Sciences, The University of Texas Health Science Center Houston, Houston, Texas 77030 (United States)] [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 and Graduate School of Biomedical Sciences, The University of Texas Health Science Center Houston, Houston, Texas 77030 (United States); Anand, Aman [Department of Radiation Oncology, Mayo Clinic, Scottsdale, Arizona 85259 (United States)] [Department of Radiation Oncology, Mayo Clinic, Scottsdale, Arizona 85259 (United States)

2013-11-15T23:59:59.000Z

145

Advanced Rooftop Control (ARC) Retrofit: Field-Test Results  

SciTech Connect (OSTI)

The multi-year research study was initiated to find solutions to improve packaged equipment operating efficiency in the field. Pacific Northwest National Laboratory (PNNL), with funding from the U.S. Department of Energys (DOEs) Building Technologies Office (BTO) and Bonneville Power Administration (BPA) conducted this research, development and demonstration (RD&D) study. Packaged equipment with constant speed supply fans is designed to provide ventilation at the design rate at all times when the fan is operating as required by building code. Although there are a number of hours during the day when a building may not be fully occupied or the need for ventilation is lower than designed, the ventilation rate cannot be adjusted easily with a constant speed fan. Therefore, modulating the supply fan in conjunction with demand controlled ventilation (DCV) will not only reduce the coil energy but also reduce the fan energy. The objective of this multi-year research, development and demonstration project was to determine the magnitude of energy savings achievable by retrofitting existing packaged rooftop air conditioners with advanced control strategies not ordinarily used for packaged units. First, through detailed simulation analysis, it was shown that significant energy (between 24% and 35%) and cost savings (38%) from fan, cooling and heating energy consumption could be realized when packaged air conditioning units with gas furnaces are retrofitted with advanced control packages (combining multi-speed fan control, integrated economizer controls and DCV). The simulation analysis also showed significant savings for heat pumps (between 20% and 60%). The simulation analysis was followed by an extensive field test of a retrofittable advanced rooftop unit (RTU) controller.

Wang, Weimin; Katipamula, Srinivas; Ngo, Hung; Underhill, Ronald M.; Taasevigen, Danny J.; Lutes, Robert G.

2013-07-31T23:59:59.000Z

146

Field test of the Rapid Transuranic Monitoring Laboratory  

SciTech Connect (OSTI)

A field test of the Rapid Transuranic Monitoring Laboratory (RTML) developed at the Idaho National Engineering Laboratory (INEL) was conducted as part of a demonstration sponsored by the Buried Waste Integrated Demonstration (BWID). The RTML is a mobile, field- deployable laboratory developed for use at buried radioactive waste remediation sites to allow onsite preparation and analysis of soil, smear, and air filter samples for alpha and gamma-emitting contaminants. Analytical instruments installed in the RTML include an extended range, germanium photon analysis spectrometer with an automatic sample changer, two large-area ionization chamber alpha spectrometers, and four alpha continuous air monitors. The performance of the RTML was tested at the Test Reactor Area and Cold Test Pit near the Radioactive Waste Management Complex at the INEL. Objectives, experimental procedures, and an evaluation of the performance of the RTML are presented.

McIsaac, C.V.; Sill, C.W.; Gehrke, R.J.; Killian, E.W.; Watts, K.D.; Amaro, C.R.

1993-12-01T23:59:59.000Z

147

Weapons testing data determines brain makes new neurons into adulthood  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 4 For immediate release: 06/10/2013 | NR-13-06-04 Weapons testing data determines brain makes new neurons into adulthood Anne M Stark, LLNL, (925) 422-9799, stark8@llnl.gov Image courtesy of National Institutes of Health. LIVERMORE, Calif. -- Using data derived from nuclear weapons testing of the 1950s and '60s, Lawrence Livermore scientists have found that a small portion of the human brain involved in memory makes new neurons well into adulthood. The research may have profound impacts on human behavior and mental health. The study supports the importance of investigating the therapeutic potential of applying adult neurogenesis to the treatment of age-related cognitive disorders. Neurogenesis is the process by which neurons are generated from neural stem

148

Tests of transfer reaction determinations of astrophysical S factors  

E-Print Network [OSTI]

, the S factors for the Tests of transfer reaction determination C. A. Gagliardi, R. E. Tribble, A. Azhari, H. L. Clark, Y.-W Cyclotron Institute, Texas A&M University V. Burjan, J. Cejpek, V. Kroha Institute for Nuclear Physics, Czech Academ ~Received 2...!. @8# L. Trache, A. Azhari, H. L. Clark, C. A. Gagliardi, Y.-W. Lui, A. M. Mukhamedzhanov, R. E. Tribble, and F. Carstoiu, Phys. Rev. C 58, 2715 ~1998!. @9# R. Morlock, R. Kunz, A. Mayer, M. Jaeger, A. Muller, J. W. Hammer, P. Mohr, H. Oberhummer, G...

Gagliardi, Carl A.; Tribble, Robert E.; Azhari, A.; Clark, HL; Lui, YW; Mukhamedzhanov, AM; Sattarov, A.; Trache, L.; Burjan, V.; Cejpek, J.; Kroha, V.; Piskor, S.; Vincour, J.

1999-01-01T23:59:59.000Z

149

Wind Program Announces $2 Million to Develop and Field Test Wind...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Announces 2 Million to Develop and Field Test Wind Energy Bat Impact Minimization Technologies Wind Program Announces 2 Million to Develop and Field Test Wind Energy Bat Impact...

150

E-Print Network 3.0 - activities field test Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

field test Search Powered by Explorit Topic List Advanced Search Sample search results for: activities field test Page: << < 1 2 3 4 5 > >> 1 Space Radiation Shielding Program...

151

E-Print Network 3.0 - attempted field test Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

field test Search Powered by Explorit Topic List Advanced Search Sample search results for: attempted field test Page: << < 1 2 3 4 5 > >> 1 GTR Design Considerations Overview...

152

NREL Determines Better Testing Methods for Photovoltaic Module Durability (Fact Sheet), NREL Highlights, Research & Development  

SciTech Connect (OSTI)

NREL discoveries will enable manufacturers to produce more robust photovoltaic modules. Over the past decade, some photovoltaic (PV) modules have experienced power losses because of the system voltage stress that modules experience in fielded arrays. This is partly because qualification tests and standards do not adequately evaluate the durability of modules that undergo the long-term effects of high voltage. Scientists at the National Renewable Energy Laboratory (NREL) tried various testing methods and stress levels to demonstrate module durability to system voltage potential-induced degradation (PID) mechanisms. The results of these accelerated tests, along with outdoor testing, were used to estimate the acceleration factors needed to more accurately evaluate the durability of modules to system voltage stress. NREL was able to determine stress factors, levels, and methods for testing based on the stresses experienced by modules in the field. These results, in combination with those in the literature, suggest that constant stress with humidity and system voltage is more damaging than stress applied intermittently or with periods of recovery comprising hot and dry conditions or alternating bias in between. NREL has determined some module constructions to be extremely durable to PID. These findings will help the manufacturers of PV materials and components produce more durable products that better satisfy their customers. NREL determined that there is rapid degradation of some PV modules under system voltage stress and evaluated degradation rates in the field to develop more accurate accelerated testing methods. PV module manufacturers will be better able to choose robust materials and durable designs and guarantee sturdier, longer-lasting products. As PV modules become more durable, and thus more efficient over the long term, the risks and the cost of PV power will be reduced.

Not Available

2011-11-01T23:59:59.000Z

153

Field Testing of a Portable Radiation Detector and Mapping System  

SciTech Connect (OSTI)

Researchers at the Savannah River Site (SRS) have developed a man- portable radiation detector and mapping system (RADMAPS) which integrates the accumulation of radiation information with precise ground locations. RADMAPS provides field personnel with the ability to detect, locate, and characterize nuclear material at a site or facility by analyzing the gamma or neutron spectra and correlating them with position. the man-portable field unit records gamma or neutron count rate information and its location, along with date and time, using an embedded Global Positioning System (GPS). RADMAPS is an advancement in data fusion, integrating several off-the-shelf technologies with new computer software resulting in a system that is simple to deploy and provides information useful to field personnel in an easily understandable form. Decisions on subsequent actions can be made in the field to efficiently use available field resources. The technologies employed in this system include: recording GPS, radiation detection (typically scintillation detectors), pulse height analysis, analog-to-digital converters, removable solid-state (Flash or SRAM) memory cards, Geographic Information System (GIS) software and personal computers with CD-ROM supporting digital base maps. RADMAPS includes several field deployable data acquisition systems designed to simultaneously record radiation and geographic positions. This paper summarizes the capabilities of RADMAPS and some of the results of field tests performed with the system.

Hofstetter, K.J. [Westinghouse Savannah River Company, AIKEN, SC (United States); Hayes, D.W.; Eakle, R.F.

1998-03-01T23:59:59.000Z

154

Blow-Up of Test Fields Near Cauchy Horizons  

E-Print Network [OSTI]

The behaviour of test fields near a compact Cauchy horizon is investigated. It is shown that solutions of nonlinear wave equations on Taub spacetime with generic initial data cannot be continued smoothly to both extensions of the spacetime through the Cauchy horizon. This is proved using an energy method. Similar results are obtained for the spacetimes of Moncrief containing a compact Cauchy horizon and for more general matter models.

J. Rauch; A. D. Rendall

1993-06-23T23:59:59.000Z

155

Enhancing Building Operations Through Automated Diagnostics: Field Test Results  

E-Print Network [OSTI]

. Details of Field Test Sites Location Building Type Number of AHU Type of AHU Typical Schedule (military time) Richland Office/Lab 6 VAV 0 to 24 Richland Office 3 CAV 6 to 18 Denver Office 3 VAV 0 to 24 San Francisco Hotel 6.... Pratt, R.G., N.N. Bauman, and S. Katipamula. 2003. ?New Technology Demonstration of the Whole-Building Diagnostician at the Federal Aviation Administration-Denver Airport.? PNNL- 14157, Pacific Northwest National Laboratory, Richland, Washington...

Katipamula, S.; Brambley, M. R.; Bauman, N.; Pratt, R. G.

2003-01-01T23:59:59.000Z

156

NETL: News Release - DOE Announces Further Field Testing of Advanced  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Announces Further Field Testing of Advanced Mercury Control Technologies DOE Announces Further Field Testing of Advanced Mercury Control Technologies Six Projects Selected in Round 2 to Address Future Power Plant Mercury Reduction Initiatives PITTSBURGH, PA - With an eye on future federal regulations aimed at reducing mercury emissions, the U.S. Department of Energy has selected six additional projects as part of a DOE research program to advance the technical readiness of mercury control options for the Nation's fleet of coal-fired power plants. The six projects in this second round of awards build on last year's selection of eight projects, and will verify technology performance, evaluate costs, and assess balance-of-plant impacts. The projects will field test advanced, post-combustion technologies involving all coal types at utilities using pulverized coal or cyclone-boiler configurations, and focus on technologies capable of removing mercury from flue gas containing higher concentrations of elemental mercury. The technologies include sorbent injection, wet flue gas desulfurization systems enhancement, and combustion optimization.

157

Field evaluation of a standard test method for screening fuels in soils at a railroad site  

SciTech Connect (OSTI)

American Society for Testing and Materials (ASTM) Method D-5831-95 is a standard test method for screening fuel contamination in soils. This method uses low-toxicity chemicals and can be used to screen organic-rich soils. It is also fast, easy, and inexpensive to perform. The screening method calls for extracting a sample of soil with isopropyl alcohol (IPA) following treatment with calcium oxide. The resulting extract is filtered, and the ultraviolet (UV) absorbance of the extract is measured at 254 nm. Depending on the information available concerning the contaminant fuel type and availability of the contaminant fuel for calibration, the method can be used to determine the approximate concentration of fuel contamination, an estimated value of fuel contamination, or an indication of the presence or absence of fuel contamination. Fuels containing aromatic compounds, such as diesel fuel and gasoline, as well as other aromatic-containing hydrocarbon materials, such as motor oil, crude oil, and coal oil can be determined. ASTM Method D-5831 was evaluated by using the method to screen soil samples at an actual field site. Soil contaminated with weathered and fresh diesel fuel was sampled and tested for its contaminant concentration. Soil samples were screened in the field using ASTM Method D-5831 and a portable soil test kit. In addition, splits of the soil samples were analyzed in the laboratory using an extractable petroleum hydrocarbon method. Field and laboratory data were compared and show good correlation between field screening and laboratory results.

Schabron, J.F.; Sorini, S.S. [Western Research Institute, Laramie, WY (United States); Butler, E.L. [Gradient Corp., Cambridge, MA (United States); Frisbie, S. [Johnson Co., Inc., Montpelier, VT (United States)

1997-12-31T23:59:59.000Z

158

Exploration 3-D Seismic Field Test/Native Tribes Initiative  

SciTech Connect (OSTI)

To determine current acquisition procedures and costs and to further the goals of the President's Initiative for Native Tribes, a seismic-survey project is to be conducted on Osage tribal lands. The goals of the program are to demonstrate the capabilities, costs, and effectiveness of 3-D seismic work in a small-operator setting and to determine the economics of such a survey. For these purposes, typical small-scale independent-operator practices are being followed and a shallow target chose in an area with a high concentration of independent operators. The results will be analyzed in detail to determine if there are improvements and/or innovations which can be easily introduced in field-acquisition procedures, in processing, or in data manipulation and interpretation to further reduce operating costs and to make the system still more active to the small-scale operator.

Carroll, Herbert B.; Chen, K.C.; Guo, Genliang; Johnson, W.I.; Reeves,T.K.; Sharma,Bijon

1999-04-27T23:59:59.000Z

159

E-Print Network 3.0 - area field test Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

field test Search Powered by Explorit Topic List Advanced Search Sample search results for: area field test Page: << < 1 2 3 4 5 > >> 1 FIELD STUDIES IN NEOTROPICAL ECOSYSTEMS...

160

Well test imaging - a new method for determination of boundaries from well test data  

SciTech Connect (OSTI)

A new method has been developed for analysis of well test data, which allows the direct calculation of the location of arbitrary reservoir boundaries which are detected during a well test. The method is based on elements of ray tracing and information theory, and is centered on the calculation of an instantaneous {open_quote}angle of view{close_quote} of the reservoir boundaries. In the absence of other information, the relative reservoir shape and boundary distances are retrievable in the form of a Diagnostic Image. If other reservoir information, such as 3-D seismic, is available; the full shape and orientation of arbitrary (non-straight line or circular arc) boundaries can be determined in the form of a Reservoir Image. The well test imaging method can be used to greatly enhance the information available from well tests and other geological data, and provides a method to integrate data from multiple disciplines to improve reservoir characterization. This paper covers the derivation of the analytical technique of well test imaging and shows examples of application of the technique to a number of reservoirs.

Slevinsky, B.A.

1997-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Issues in acoustic field testing of quiet modular classrooms  

Science Journals Connector (OSTI)

Modular classrooms are important to American education: About 300 000 modular classrooms are currently in use by public school systems here. Good acoustical conditions for learning are no less vital for students in modular classrooms than stick?built classrooms. In an effort to promote good acoustics in modular classrooms ANSI S12 Working Group 46 is seeking to standardize acoustic field testing. Their efforts are in response to key acoustical issues of modular classrooms: Excessive noise from HVAC (heating ventilating and air conditioning) systems and poor airborne sound insulation from exterior noise sources. In a recent and notable advance an HVAC system provider reported good progress in modular HVACnoise reduction: A ducted wall mounted system was used instead of the usual free blowing system with exposed fans. HVACnoise in the unoccupied room was near the maximum 35 dB level required by ANSI S12.60. Interior noise levels were so low that efforts to confirm their values were confounded by noise contamination from exterior sources. The relatively high interior ambient noise levels were due to poor airborne sound insulation. Lessons learned from recent field testing will be discussed. Results of airborne sound insulation tests now in planning stages will be reported if available.

David Lubman; Louis C. Sutherland

2007-01-01T23:59:59.000Z

162

Field Test of Measurement-Device-Independent Quantum Key Distribution  

E-Print Network [OSTI]

A main type of obstacles of practical applications of quantum key distribution (QKD) network is various attacks on detection. Measurement-device-independent QKD (MDIQKD) protocol is immune to all these attacks and thus a strong candidate for network security. Recently, several proof-of-principle demonstrations of MDIQKD have been performed. Although novel, those experiments are implemented in the laboratory with secure key rates less than 0.1 bps. Besides, they need manual calibration frequently to maintain the system performance. These aspects render these demonstrations far from practicability. Thus, justification is extremely crucial for practical deployment into the field environment. Here, by developing an automatic feedback MDIQKD system operated at a high clock rate, we perform a field test via deployed fiber network of 30 km total length, achieving a 16.9 bps secure key rate. The result lays the foundation for a global quantum network which can shield from all the detection-side attacks.

Yan-Lin Tang; Hua-Lei Yin; Si-Jing Chen; Yang Liu; Wei-Jun Zhang; Xiao Jiang; Lu Zhang; Jian Wang; Li-Xing You; Jian-Yu Guan; Dong-Xu Yang; Zhen Wang; Hao Liang; Zhen Zhang; Nan Zhou; Xiongfeng Ma; Teng-Yun Chen; Qiang Zhang; Jian-Wei Pan

2014-08-11T23:59:59.000Z

163

FIELD INVESTIGATION AT THE FAULTLESS SITE CENTRAL NEVADA TEST  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FIELD FIELD INVESTIGATION AT THE FAULTLESS SITE CENTRAL NEVADA TEST AREA DOEINV/10845--T3 DE93 005915 by JennyB. Chapman, Thdd M. Mihevc and Brad Lyles Water Resources Center Desert Research Institute DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- mendation, or favoring

164

Determination of Water Saturation in Relatively Dry Porous Media Using Gas-phase Tracer Tests  

SciTech Connect (OSTI)

Soil desiccation (drying), involving water evaporation induced by dry air injection and extraction, is a potentially robust remediation process to slow migration of inorganic or radionuclide contaminants through the vadose zone. The application of gas-phase partitioning tracer tests has been proposed as a means to estimate initial water volumes and to monitor the progress of the desiccation process at pilot-test and field sites. In this paper, tracer tests have been conducted in porous medium columns with various water saturations using sulfur hexafluoride as the conservative tracer and tricholorofluoromethane and difluoromethane as the water-partitioning tracers. For porous media with minimal silt and/or organic matter fractions, tracer tests provided reasonable saturation estimates for saturations close to zero. However, for sediments with significant silt and/or organic matter fractions, tracer tests only provided satisfactory results when the water saturation was at least 0.1 - 0.2. For dryer conditions, the apparent tracer retardation increases due to air soil sorption, which is not included in traditional retardation coefficients derived from advection-dispersion equations accounting only for air water partitioning and water soil sorption. Based on these results, gas-phase partitioning tracer tests may be used to determine initial water volumes in sediments, provided the initial water saturations are sufficiently large. However, tracer tests are not suitable for quantifying moisture content in desiccated sediments.

Oostrom, Martinus; Tartakovsky, Guzel D.; Wietsma, Thomas W.; Truex, Michael J.; Dane, Jacob H.

2011-04-15T23:59:59.000Z

165

Fuel Assembly Shaker Test for Determining Loads on a PWR Assembly...  

Broader source: Energy.gov (indexed) [DOE]

Assembly Shaker Test for Determining Loads on a PWR Assembly under Surrogate Normal Conditions of Truck Transport R0.1 Fuel Assembly Shaker Test for Determining Loads on a PWR...

166

In Situ Redox Manipulation Field Injection Test Report - Hanford 100-H Area  

SciTech Connect (OSTI)

This report presents results of an In Situ Redox Manipulation (ISRM) Field Injection Withdrawal Test performed at the 100-H Area of the US. Department of Energy`s (DOE`s) Hanford Site in Washington State in Fiscal Year 1996 by researchers at Pacific Northwest National Laboratory (PNNL). The test is part of the overall ISRM project, the purpose of which is to determine the potential for remediating contaminated groundwater with a technology based on in situ manipulation of subsurface reduction-oxidation (redox) conditions. The ISRM technology would be used to treat subsurface contaminants in groundwater zones at DOE sites.

Fruchter, J.S.; Amonette, J.E.; Cole, C.R. [and others

1996-11-01T23:59:59.000Z

167

Modular Integrated Monitoring System (MIMS) field test installations  

SciTech Connect (OSTI)

The MIMS program is funded by the Department of Energy under the Office of Nonproliferation and National Security. The program objective is to develop cost effective, modular, multi-sensor monitoring systems. Both in-plant and ground based sensors are envisioned. It is also desirable to develop sensors/systems that can be fielded/deployed in a rapid fashion. A MIMS architecture was selected to allow modular integration of sensors and systems and is based on LonWorks technology, commercially developed by Echelon Corporation. The first MIMS fieldable hardware was demonstrated at Lawrence Livermore National Laboratory. The field test, known within the DOE as the Item Tracking and Transparency (IT&I) demonstration, involved the collaboration and cooperation of five DOE laboratories (Sandia (SNL), Lawrence Livermore (LLNL), Pacific Northwest (PNL), Los Alamos (LANL), and Oak Ridge (ORNL)). The IT&T demonstration involved the monitoring of special nuclear material as it was transported around the facility utilizing sensors from the participating labs. The scenario was programmed to ignore normal activity in the facility until entry into the room where the material was stored. A second demonstration, which involved three separate scenarios, was conducted at Idaho National Engineering Laboratory (INEL). The participants included representatives from SNL, LLNL, PNL, and INEL. DOE has selected INEL as the long term testbed for MIMS developed sensors, systems, and scenarios. This paper will describe the installation, intended purpose, and results of the field demonstrations at LLNL and INEL under the MIMS program.

Martinez, R.L.; Waymire, D.R. [Sandia National Labs., Albuquerque, NM (United States); Fuess, D.A. [Lawrence Livermore National Lab., CA (United States)] [and others

1995-07-01T23:59:59.000Z

168

Cooperative field test program for wind systems. Final report  

SciTech Connect (OSTI)

The objectives of the Federal Wind Energy Program, managed by the US Department of Energy (DOE), are (1) to assist industry and utilities in achieving a multi-regional US market penetration of wind systems, and (2) to establish the United States as the world leader in the development of advanced wind turbine technology. In 1984, the program conducted a series of planning workshops with representatives from the wind energy industry to obtain input on the Five-Year Research Plan then being prepared by DOE. One specific suggestion that came out of these meetings was that the federal program should conduct cooperative research tests with industry to enhance the technology transfer process. It was also felt that the active involvement of industry in DOE-funded research would improve the state of the art of wind turbine technology. DOE established the Cooperative Field Test Program (CFTP) in response to that suggestion. This program was one of the first in DOE to feature joint industry-government research test teams working toward common objectives.

Bollmeier, W.S. II; Dodge, D.M.

1992-03-01T23:59:59.000Z

169

Hanna, Wyoming underground coal gasification data base. Volume 3. The Hanna II, Phase I field test  

SciTech Connect (OSTI)

This report is part of a seven-volume series on the Hanna, Wyoming, underground coal gasification field tests. Volume 1 is a summary of the project, and each of Volumes 2 through 6 describes a particular test. Volume 7 is a compilation of all the data for the tests in Volumes 2 through 6. Hanna II, Phase I was conducted during the spring and summer of 1975, at a site about 700 feet up dip (to the southwest) of the Hanna I test. The test was conducted in two stages - Phase IA and IB. Phase IA consisted of linking and gasification operations between Wells 1 and 3 and Phase IB of linking from the 1-3 gasification zone to Well 2, followed by a short period of gasification from Well 2 to Well 3 over a broad range of air injection rates, in order to determine system turndown capabilities and response times. This report covers: (1) site selection and characteristics; (2) test objectives; (3) facilities description; (4) pre-operational testing; (5) test operations summary; and (6) post-test activity. 7 refs., 11 figs., 8 tabs.

Bartke, T.C.; Fischer, D.D.; King, S.B.; Boyd, R.M.; Humphrey, A.E.

1985-08-01T23:59:59.000Z

170

Near-field modeling in Frenchman Flat, Nevada Test Site  

SciTech Connect (OSTI)

The US Department of Energy (DOE) is investigating the effects of nuclear testing in underground test areas (the UGTA program) at the Nevada Test Site. The principal focus of the UGTA program is to better understand and define subsurface radionuclide migration. The study described in this report focuses on the development of tools for generating maps of hydrogeologic characteristics of subsurface Tertiary volcanic units at the Frenchman Flat corrective Action Unit (CAU). The process includes three steps. The first step involves generation of three-dimensional maps of the geologic structure of subsurface volcanic units using geophysical logs to distinguish between two classes: densely welded tuff and nonwelded tuff. The second step generates three-dimensional maps of hydraulic conductivity utilizing the spatial distribution of the two geologic classes obtained in the first step. Each class is described by a correlation structure based on existing data on hydraulic conductivity, and conditioned on the generated spatial location of each class. The final step demonstrates the use of the maps of hydraulic conductivity for modeling groundwater flow and radionuclide transport in volcanic tuffs from an underground nuclear test at the Frenchman Flat CAU. The results indicate that the majority of groundwater flow through the volcanic section occurs through zones of densely welded tuff where connected fractures provide the transport pathway. Migration rates range between near zero to approximately four m/yr, with a mean rate of 0.68 m/yr. This report presents the results of work under the FY96 Near-Field Modeling task of the UGTA program.

Pohlmann, K.; Shirley, C.; Andricevic, R.

1996-12-01T23:59:59.000Z

171

Advanced Utility Mercury-Sorbent Field-Testing Program  

SciTech Connect (OSTI)

This report summarizes the work conducted from September 1, 2003 through December 31, 2007 on the project entitled Advanced Utility Mercury-Sorbent Field-Testing Program. The project covers the testing at the Detroit Edison St. Clair Plant and the Duke Power Cliffside and Buck Stations. The St. Clair Plant used a blend of subbituminous and bituminous coal and controlled the particulate emissions by means of a cold-side ESP. The Duke Power Stations used bituminous coals and controlled their particulate emissions by means of hot-side ESPs. The testing at the Detroit Edison St. Clair Plant demonstrated that mercury sorbents could be used to achieve high mercury removal rates with low injection rates at facilities that burn subbituminous coal. A mercury removal rate of 94% was achieved at an injection rate of 3 lb/MMacf over the thirty day long-term test. Prior to this test, it was believed that the mercury in flue gas of this type would be the most difficult to capture. This is not the case. The testing at the two Duke Power Stations proved that carbon- based mercury sorbents can be used to control the mercury emissions from boilers with hot-side ESPs. It was known that plain PACs did not have any mercury capacity at elevated temperatures but that brominated B-PAC did. The mercury removal rate varies with the operation but it appears that mercury removal rates equal to or greater than 50% are achievable in facilities equipped with hot-side ESPs. As part of the program, both sorbent injection equipment and sorbent production equipment was acquired and operated. This equipment performed very well during this program. In addition, mercury instruments were acquired for this program. These instruments worked well in the flue gas at the St. Clair Plant but not as well in the flue gas at the Duke Power Stations. It is believed that the difference in the amount of oxidized mercury, more at Duke Power, was the difference in instrument performance. Much of the equipment was purchased used and all of the equipment has nearly reached the end of its useful service.

Ronald Landreth

2007-12-31T23:59:59.000Z

172

Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Task 5 Full-Scale Test Results  

SciTech Connect (OSTI)

This Topical Report summarizes progress on Cooperative Agreement DE-FC26-04NT42309, 'Field Testing of a Wet FGD Additive'. The objective of the project is to demonstrate the use of two flue gas desulfurization (FGD) additives, Evonik Degussa Corporation's TMT-15 and Nalco Company's Nalco 8034, to prevent the re-emission of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project intends to demonstrate whether the additive can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal. The project is conducting pilot- and full-scale tests of the additives in wet FGD absorbers. The tests are intended to determine required additive dosages to prevent Hg{sup 0} re-emissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Powder River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, Luminant Power (was TXU Generation Company LP), Southern Company, IPL (an AES company), Evonik Degussa Corporation and the Nalco Company. Luminant Power has provided the Texas lignite/PRB co-fired test site for pilot FGD tests and cost sharing. Southern Company has provided the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, as well as the pilot- and full-scale jet bubbling reactor (JBR) FGD systems tested. IPL provided the high-sulfur Eastern bituminous coal full-scale FGD test site and cost sharing. Evonik Degussa Corporation is providing the TMT-15 additive, and the Nalco Company is providing the Nalco 8034 additive. Both companies are also supplying technical support to the test program as in-kind cost sharing. The project is being conducted in six tasks. Of the six project tasks, Task 1 involves project planning and Task 6 involves management and reporting. The other four tasks involve field testing on FGD systems, either at pilot or full scale. The four tasks include: Task 2 - Pilot Additive Testing in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High-sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Plant Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. The pilot-scale tests and the full-scale test using high-sulfur coal were completed in 2005 and 2006 and have been previously reported. This topical report presents the results from the Task 5 full-scale additive tests, conducted at Southern Company's Plant Yates Unit 1. Both additives were tested there.

Gary Blythe; MariJon Owens

2007-12-01T23:59:59.000Z

173

Lithium bromide absorption chiller passes gas conditioning field test  

SciTech Connect (OSTI)

A lithium bromide absorption chiller has been successfully used to provide refrigeration for field conditioning of natural gas. The intent of the study was to identify a process that could provide a moderate level of refrigeration necessary to meet the quality restrictions required by natural-gas transmission companies, minimize the initial investment risk, and reduce operating expenses. The technology in the test proved comparatively less expensive to operate than a propane refrigeration plant. Volatile product prices and changes in natural-gas transmission requirements have created the need for an alternative to conventional methods of natural-gas processing. The paper describes the problems with the accumulation of condensed liquids in pipelines, gas conditioning, the lithium bromide absorption cycle, economics, performance, and operating and maintenance costs.

Lane, M.J.; Huey, M.A. [Nicol and Associates, Richardson, TX (United States)

1995-07-31T23:59:59.000Z

174

Field testing the criteria for cathodic protection of buried pipelines  

SciTech Connect (OSTI)

Five criteria for cathodic protection of buried pipelines were studied by a review of the literature, and by experimentation in the laboratory and in the field in soil environments. The five criteria studied were the following: (1) {minus}850-mV on and polarized (IR-compensated) potential, (2) 300-mV voltage shift, (3) 100-mV polarization, (4) Tafel potential, and (5) net cathodic current. Each criterion was found to provide an indication of corrosion and its control. Environmental conditions (the type of soil and its physical constituents, moisture content, oxygen level, temperature; and the presence of anaerobic bacteria) were found to be important in affecting the actual requirements and modifications to the presently accepted minimum values for the criteria. Determination of IR-voltage drops in the soil was concluded to be important for accurate interpretation of the {minus}850-mV potential and 300-mV voltage-shift criteria.

Barlo, T.J. [Northwestern Univ., Evanston, IL (United States)

1995-12-31T23:59:59.000Z

175

Interagency Field Test Evaluates Co-operation of Turbines and Radar  

Broader source: Energy.gov [DOE]

The Department of Energy and federal agency partners recently completed the first in a series of three radar technology field tests and demonstrations. The Interagency Field Test and Evaluation of...

176

Field Scale Test and Verification of CHP System at the Ritz Carlton...  

Broader source: Energy.gov (indexed) [DOE]

Field Scale Test and Verification of CHP System at the Ritz Carlton, San Francisco, August 2007 Field Scale Test and Verification of CHP System at the Ritz Carlton, San Francisco,...

177

Notes from DOE/EPRI Meeting on Phase II Mercury Field Test Needs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Notes Notes DOE/EPRI meeting on Phase II Mercury Field Test Needs Washington DC June 5, 2002 Attendees (phone/e-mail at end of notes) AEP - Gary Spitznogle EPRI - Stu Dalton DOE - Scott Renninger EPRI - George Offen DOE - Tom Feeley GRE - Mark Strohfus Duke - Tim Shawver Southern - Larry Monroe EPA - Jim Kilgroe TVA - Tom Burnett TXU - David Lamb DOE and EPRI jointly convened this meeting to obtain feedback from deeply involved industry members on the needs, scope, schedule, etc. for a second phase of full-scale, longer-term field tests of mercury controls on power plants. The program objectives would be to determine performance and costs of the major near-term control approaches with the hope of using this information both to inform the regulatory (MACT) and legislative (Clear Skies Initiative, CSI) processes as well as industry selections of

178

Field Testing of Pre-Production Prototype Residential Heat Pump Water Heaters  

Broader source: Energy.gov [DOE]

Provides and overview of field testing of 18 pre-production prototype residential heat pump water heaters

179

Field testing advanced geothermal turbodrill (AGT). Phase 1 final report  

SciTech Connect (OSTI)

Maurer Engineering developed special high-temperature geothermal turbodrills for LANL in the 1970s to overcome motor temperature limitations. These turbodrills were used to drill the directional portions of LANL`s Hot Dry Rock Geothermal Wells at Fenton Hill, New Mexico. The Hot Dry Rock concept is to drill parallel inclined wells (35-degree inclination), hydraulically fracture between these wells, and then circulate cold water down one well and through the fractures and produce hot water out of the second well. At the time LANL drilled the Fenton Hill wells, the LANL turbodrill was the only motor in the world that would drill at the high temperatures encountered in these wells. It was difficult to operate the turbodrills continuously at low speed due to the low torque output of the LANL turbodrills. The turbodrills would stall frequently and could only be restarted by lifting the bit off bottom. This allowed the bit to rotate at very high speeds, and as a result, there was excessive wear in the bearings and on the gauge of insert roller bits due to these high rotary speeds. In 1998, Maurer Engineering developed an Advanced Geothermal Turbodrill (AGT) for the National Advanced Drilling and Excavation Technology (NADET) at MIT by adding a planetary speed reducer to the LANL turbodrill to increase its torque and reduce its rotary speed. Drilling tests were conducted with the AGT using 12 1/2-inch insert roller bits in Texas Pink Granite. The drilling tests were very successful, with the AGT drilling 94 ft/hr in Texas Pink Granite compared to 45 ft/hr with the LANL turbodrill and 42 ft/hr with a rotary drill. Field tests are currently being planned in Mexico and in geothermal wells in California to demonstrate the ability of the AGT to increase drilling rates and reduce drilling costs.

Maurer, W.C.; Cohen, J.H.

1999-06-01T23:59:59.000Z

180

Pilot Phase of a Field Study to Determine Waste of Water and Energy in  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Phase of a Field Study to Determine Waste of Water and Energy in Phase of a Field Study to Determine Waste of Water and Energy in Residential Hot-Water Distribution Systems Title Pilot Phase of a Field Study to Determine Waste of Water and Energy in Residential Hot-Water Distribution Systems Publication Type Report LBNL Report Number LBNL-4985E Year of Publication 2011 Authors Lutz, James D., Peter J. Biermayer, and Derek A. King Subsidiary Authors Energy Analysis Department Document Number LBNL-4985E Pagination 29 Date Published January 1 Publisher Lawrence Berkeley National Laboratory City Berkeley ISBN Number LBNL-4985E Abstract This paper provides an overview of the pilot phase of a field study to determine the feasibility of a method of directly measuring the waste of water and energy caused by current hot water distribution systems (HWDS) in California residences using wireless sensor network technologies. The experience gained in the pilot phase study using wireless sensor networks demonstrates that it is clearly feasible to use this technology for measuring water and gas flows and temperatures.The goal was to demonstrate a method to reliably collect water flow and temperature data from every indoorhot water end use point, at the water heater in one second intervals when water was flowing. The overall success of the pilot phase study indicates that this technique can work. However, the pilot phase study did reveal shortcomings in many areas. The recommendations in this paper address those shortcomings and provide ways to improve the outcomes of any follow-on field study. The project's tasks were to test and evaluate the proposed hardware, installation protocols, data collection, and processing procedures. The techniques developed in this project provide a way to accurately measure temperature and flow of indoor water use events at one second resolution. The technologies used in this pilot phase study are viable for use in a larger field study to determine the energy and water efficiency of hot water distribution systems in California homes. The lessons learned from this experience will improve procedures, programming and wireless sensor network specifications.

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Draft for Peer Review and Field Testing 6-20-2009  

E-Print Network [OSTI]

Draft for Peer Review and Field Testing 6-20-2009 Wetlands Regulatory Assistance Program DRAFT Islands Region U.S. Army Corps of Engineers #12;Draft for Peer Review and Field Testing 6-20-2009 Abstract;Draft for Peer Review and Field Testing 6-20-2009 Contents Preface

US Army Corps of Engineers

182

Determination of dispersivities from a natural-gradient dispersion test  

E-Print Network [OSTI]

, and radioactive wastes. Contaminant hydrogeology is presently a focal point in the realm of hydrologic modeling. Generally, models are designed to represent simplified versions of reality and The style and format of this document was taken from the Journal... dispersivities, v ia a graphical approach, from a natural-gradient dispersion test in which artificial pollution was injected into an aquifer. The dispersion test was conducted by Sud icky et al. (1983) in order to characterize the dispersive properties...

Hoover, Caroline Marie

1985-01-01T23:59:59.000Z

183

Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Agency -  

Broader source: Energy.gov (indexed) [DOE]

nergy nergy Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Agency - Energy Project Title: (0471-1544) Sheetak Inc. - Thermoelectric Reactors for Efficient Automotive Thermal Storage Location: *- Multiple States - New York, Pennsylvania, Texas Proposed Action or Project Description: American Recovery and Reinvestment Act: D Funding will support development of a novel system of thermoelectric reactors for efficient automotive thermal energy storage (TREATS) in electric vehicle and plug-in hybrid electric vehicle Heating, Ventilation, and Cooling (HVAC) systems. Proposed work consists of indoor laboratory-based research and development, including (1) experimentation and analysis to assess the mechanics and dynamics of thermoelectric reactors, (2) design, fabrication, testing, and analysis of hot and cold reactors, (3) design, fabrication, testing, and

184

Experimental determination of radiated internal wave power without pressure field Frank M. Lee,1  

E-Print Network [OSTI]

in global ocean mixing, it is important to understand the power present in the internal wave fieldExperimental determination of radiated internal wave power without pressure field data Frank M. Lee to determine, using only velocity field data, the time-averaged energy flux J and total radiated power P

Morrison, Philip J.,

185

Experimental determination of radiated internal wave power without pressure field data  

SciTech Connect (OSTI)

We present a method to determine, using only velocity field data, the time-averaged energy flux (J) and total radiated power P for two-dimensional internal gravity waves. Both (J) and P are determined from expressions involving only a scalar function, the stream function ?. We test the method using data from a direct numerical simulation for tidal flow of a stratified fluid past a knife edge. The results for the radiated internal wave power given by the stream function method agree to within 0.5% with results obtained using pressure and velocity data from the numerical simulation. The results for the radiated power computed from the stream function agree well with power computed from the velocity and pressure if the starting point for the stream function computation is on a solid boundary, but if a boundary point is not available, care must be taken to choose an appropriate starting point. We also test the stream function method by applying it to laboratory data for tidal flow past a knife edge, and the results are found to agree with the direct numerical simulation. The supplementary material includes a Matlab code with a graphical user interface that can be used to compute the energy flux and power from two-dimensional velocity field data.

Lee, Frank M.; Morrison, P. J. [Physics Department and Institute for Fusion Studies, The University of Texas at Austin, Austin, Texas 787121192 (United States)] [Physics Department and Institute for Fusion Studies, The University of Texas at Austin, Austin, Texas 787121192 (United States); Paoletti, M. S.; Swinney, Harry L. [Physics Department, The University of Texas at Austin, Austin, Texas 787121192 (United States)] [Physics Department, The University of Texas at Austin, Austin, Texas 787121192 (United States)

2014-04-15T23:59:59.000Z

186

A Deterministic Scan-BIST Architecture with Application to Field Testing of High-Availability Systems  

E-Print Network [OSTI]

field testing are essential to ensure the reliable operation of computer-controlled systems. Protection to be used for field testing. The use of such short test sequences is desirable in safety-critical systems testing to be carried out with low system downtime. We synthesize the BIST logic for several ISCAS 89

Chakrabarty, Krishnendu

187

An attempt to determine a basis for affective democratic fields  

E-Print Network [OSTI]

, or makes reasonable and possible this transmission? How can we ever move to new understandings? How can change occur? There may be some ways to answer these questions within this tradition. Certainly some are working on it. Robert Brandon in his recent... activity of existents in fields. In the above mentioned book, Makin it Ex licit, Brandon says that "the early Frege envisages a field of material inferences that confer conceptual content in sentences caught up in them " (110). There is something...

Veselka, Van Kenneth

2012-06-07T23:59:59.000Z

188

Initial field testing definition of subsurface sealing and backfilling tests in unsaturated tuff; Yucca Mountain Site Characterization Project  

SciTech Connect (OSTI)

This report contains an initial definition of the field tests proposed for the Yucca Mountain Project repository sealing program. The tests are intended to resolve various performance and emplacement concerns. Examples of concerns to be addressed include achieving selected hydrologic and structural requirements for seals, removing portions of the shaft liner, excavating keyways, emplacing cementitious and earthen seals, reducing the impact of fines on the hydraulic conductivity of fractures, efficient grouting of fracture zones, sealing of exploratory boreholes, and controlling the flow of water by using engineered designs. Ten discrete tests are proposed to address these and other concerns. These tests are divided into two groups: Seal component tests and performance confirmation tests. The seal component tests are thorough small-scale in situ tests, the intermediate-scale borehole seal tests, the fracture grouting tests, the surface backfill tests, and the grouted rock mass tests. The seal system tests are the seepage control tests, the backfill tests, the bulkhead test in the Calico Hills unit, the large-scale shaft seal and shaft fill tests, and the remote borehole sealing tests. The tests are proposed to be performed in six discrete areas, including welded and non-welded environments, primarily located outside the potential repository area. The final selection of sealing tests will depend on the nature of the geologic and hydrologic conditions encountered during the development of the Exploratory Studies Facility and detailed numerical analyses. Tests are likely to be performed both before and after License Application.

Fernandez, J.A. [Sandia National Labs., Albuquerque, NM (United States); Case, J.B.; Tyburski, J.R. [I. T. Corp., Albuquerque, NM (United States)

1993-05-01T23:59:59.000Z

189

Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program  

SciTech Connect (OSTI)

A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use of the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.

Ternes, MP

2001-12-05T23:59:59.000Z

190

Fabrication and testing of oxidized porous silicon field emitter strips  

E-Print Network [OSTI]

screens. Current research efforts are directed towards development of thin vacuum-fluorescent displays using matrix-addressable groups of field emission cathodes [13, 14]. Another potential application for field emitting cathodes is as electronic... screens. Current research efforts are directed towards development of thin vacuum-fluorescent displays using matrix-addressable groups of field emission cathodes [13, 14]. Another potential application for field emitting cathodes is as electronic...

Madduri, Vasanta Bhanu

2012-06-07T23:59:59.000Z

191

Determining coal permeabilities through constant pressure production interference testing  

E-Print Network [OSTI]

Kurt Schubarth, B. S. , Texas A&M Un1versity Chairman of Advisory Committee: Dr. Stephen A. Holditch The determination of format1on propert1es 1s important to the success of any underground coal gasification (UCG) project. There are many ways.... : "Hydrological Site Characterization for In-Situ Coal Gasification, " 6th Underground Coal Conversion Symposium, July 13-17, 1980. Schrider, L. A. and Jennings, J. W. : "An Underground Coal Gasification Experiment, Hanna, Wyoming, " 1974, SPE 4993. 3. van...

Schubarth, Stephen Kurt

2012-06-07T23:59:59.000Z

192

Comparison of field and laboratory-simulated drill-off tests  

SciTech Connect (OSTI)

In this paper, field drill-off test results are compared with data from laboratory simulations. A simple theory for analyzing drill-off tests is developed. The weight-on bit (WOB) decay with time is close to exponential, but large threshold WOB's, resulting from poor weight transmission downhole, are sometimes observed in field tests.

Bourdon, J.C.; Peltier, B. (Sedco-Forex Technical Centre (USA)); Cooper, G.A. (Univ. of California, Berkley, CA (USA)); Curry, D.A. (International Drilling and Downhole Technology Centre in Aberdeen (Great Britian)); McCann, D. (Sedco-Forex Technical Centre (USA))

1989-12-01T23:59:59.000Z

193

Small Scale Field Test Demonstrating CO2 Sequestration in Arbuckle...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CCUS projects. Existing small-scale field projects have been conducted by the Regional Carbon Sequestration Partnerships (RCSP) during their Validation Phase. These small-scale...

194

Field Testing of a Wet FGD Additive for Enhanced Mercury Control  

SciTech Connect (OSTI)

This document is the final report for DOE-NETL Cooperative Agreement DE-FC26-04NT42309, 'Field Testing of a Wet FGD Additive'. The objective of the project has been to demonstrate the use of two flue gas desulfurization (FGD) additives, Evonik Degussa Corporation's TMT-15 and Nalco Company's Nalco 8034, to prevent the re-emission of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project was intended to demonstrate whether such additives can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal. The project involved pilot- and full-scale tests of the additives in wet FGD absorbers. The tests were intended to determine required additive dosages to prevent Hg{sup 0} re-emissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Powder River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, Luminant Power (was TXU Generation Company LP), Southern Company, IPL (an AES company), Evonik Degussa Corporation and the Nalco Company. Luminant Power provided the Texas lignite/PRB co-fired test site for pilot FGD tests and project cost sharing. Southern Company provided the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, the pilot- and full-scale jet bubbling reactor (JBR) FGD systems tested, and project cost sharing. IPL provided the high-sulfur Eastern bituminous coal full-scale FGD test site and cost sharing. Evonik Degussa Corporation provided the TMT-15 additive, and the Nalco Company provided the Nalco 8034 additive. Both companies also supplied technical support to the test program as in-kind cost sharing. The project was conducted in six tasks. Of the six tasks, Task 1 involved project planning and Task 6 involved management and reporting. The other four tasks involved field testing on FGD systems, either at pilot or full scale. These four tasks included: Task 2 - Pilot Additive Testing in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High-sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Plant Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. The pilot-scale tests were completed in 2005 and the full-scale test using high-sulfur coal was completed in 2006; only the TMT-15 additive was tested in these efforts. The Task 5 full-scale additive tests conducted at Southern Company's Plant Yates Unit 1 were completed in 2007, and both the TMT-15 and Nalco 8034 additives were tested.

Gary Blythe; MariJon Owens

2007-12-31T23:59:59.000Z

195

Fourth Novatek Hammer Field Test Department of Energy Well PM-2-31  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Novatek Hammer Field Test Novatek Hammer Field Test Department of Energy Well PM-2-31 Garfield County, Colorado September, 1995 Report Prepared for Mud Hammer Development Project Partners Mobil Oil Novatek Brian Tarr, MEPTEC Drilling MOBIL EXPLORATION AND PRODUCTION TECHNICAL CENTER Dallas, Texas September 1995 Fourth Novatek Hammer Field Test Department of Energy Well PM-2-31 September 1995 Contents Page EXECUTIVE SUMMARY 3 CONCLUSIONS 4 RECOMMENDATIONS5 5 Field Test Procedure and Results 6 APPENDIX 1 - Well Data 10 APPENDIX 2 - ∆P Calculations APPENDIX 3 - Novatek hammer drawings and photo.'s Fourth Novatek Hammer Field Test Department of Energy Well PM-2-31 September 1995 EXECUTIVE SUMMARY Objectives The primary objective of the fourth field test was to establish if the threshold level of power required to increase rock bit

196

Field Testing of the Advanced Worker Protection System  

Office of Scientific and Technical Information (OSTI)

tasks which simulate actual decontamination activities. + to shake down the new IUOE test facilities. The activities began with a demonstration of filling the backpack with...

197

Concept Testing and Development at the Raft River Geothermal Field, Idaho  

Broader source: Energy.gov [DOE]

Concept Testing and Development at the Raft River Geothermal Field, Idaho presentation at the April 2013 peer review meeting held in Denver, Colorado.

198

Upcoming Funding Opportunity to Develop and Field Test Wind Energy Bat Impact Minimization Technologies  

Broader source: Energy.gov [DOE]

EERE's Wind Program announced a Notice of Intent to issue a funding opportunity entitled "Wind Energy Bat Impact Minimization Technologies and Field Testing Opportunities."

199

RDI Development: Wisdom Way Solar Village, Greenfield, Massachusetts Field Test Report  

SciTech Connect (OSTI)

NREL, Mountain Energy Partnership, and the Consortium of Advanced Residential Buildings conducted field tests on a house in Wisdom Way Solar Village to verify energy efficiency.

Fang, X.; Hancock, E.

2009-05-01T23:59:59.000Z

200

Field test of liquid nitrogen cooled cryogenic power cable  

Science Journals Connector (OSTI)

A liquid nitrogen cooled cryogenic cable, 66 kV, 100 MVA, 30 m was constructed and tested with loads simulating actual operating loads from October 1970 to December 1971. The successful operation of the cable makes us hopeful it can be used for large capacity transmission. Our test line is composed of aluminium stranded hollow conductor, liquid-nitrogen impregnated polyethylene paper electrical insulation, and polyurethane foam thermal insulation.

H. Nagano; M. Fukasawa; S. Kuma; K. Sugiyama

1973-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Field Test of High Temperature Corrosion Sensors in a Waste to Energy Plant  

SciTech Connect (OSTI)

A field trial of electrochemical corrosion rate sensors was conducted over a five month period to monitor fireside corrosion in a waste to energy (WTE) plant. The unique 3-electrode air-cooled corrosion sensors, each including a thermocouple to monitor sensor temperature, were installed in four different ports at approximately the same level of the WTE boiler. A total of twelve sensors were tested, six with electrodes using the carbon steel boiler tube material, and six using the nickel-chromium weld overlay alloy for the electrodes. Corrosion rates and temperatures of the sensors were monitored continuously through the trial. Measurements of sensor thickness loss were used to calibrate the electrochemical corrosion rates. Air cooling of the sensors was found to be necessary in order to bring the sensors to the temperature of the boiler tubes, to better match the corrosion rate of the tubes, and to increase survivability of the sensors and thermocouples. Varying the temperature of the sensors simulated corrosion rates of boiler tubes with steam temperatures above and below that in the actual WTE plant. Temperatures of two of the sensors were successfully held at various controlled temperatures close to the steam temperature for a three hour test period. Corrosion rates of the two materials tested were similar although of different magnitude. An expression relating the corrosion rate of the boiler tube material to the corrosion rate of weld overlay was determined for a 7 day period in the middle of the field trial. Results from the field trial suggest that corrosion rate sensors controlled to the outer waterwall temperature can successfully monitor fireside corrosion in WTE plants and be used as a process control variable by plant operators.

Matthes, S.A.; Covino, B.S., Jr.; Bullard, S.J.; Williamson, K.M.

2008-03-16T23:59:59.000Z

202

Design and Installation of a Disposal Cell Cover Field Test  

SciTech Connect (OSTI)

The U.S. Department of Energys Office of Legacy Management (LM) initiated a cover assessment project in September 2007 to evaluate an inexpensive approach to enhancing the hydrological performance of final covers for disposal cells. The objective is to accelerate and enhance natural processes that are transforming existing conventional covers, which rely on low-conductivity earthen barriers, into water balance covers, that store water in soil and release it as soil evaporation and plant transpiration. A low conductivity cover could be modified by deliberately blending the upper layers of the cover profile and planting native shrubs. A test facility was constructed at the Grand Junction, Colorado, Disposal Site to evaluate the proposed methodology. The test cover was constructed in two identical sections, each including a large drainage lysimeter. The test cover was constructed with the same design and using the same materials as the existing disposal cell in order to allow for a direct comparison of performance. One test section will be renovated using the proposed method; the other is a control. LM is using the lysimeters to evaluate the effectiveness of the renovation treatment by monitoring hydrologic conditions within the cover profile as well as all water entering and leaving the system. This paper describes the historical experience of final covers employing earthen barrier layers, the design and operation of the lysimeter test facility, testing conducted to characterize the as-built engineering and edaphic properties of the lysimeter soils, the calibration of instruments installed at the test facility, and monitoring data collected since the lysimeters were constructed.

Benson, C.H. [University of WisconsinMadison, Madison, Wisconsin; Waugh, W.J. [S.M. Stoller Corporation, Grand Junction, Colorado; Albright, W.H. [Desert Research Institute, Reno, Nevada; Smith, G.M. [Geo-Smith Engineering, Grand Junction, Colorado; Bush, R.P. [U.S. Department of Energy, Grand Junction, Colorado

2011-02-27T23:59:59.000Z

203

OIKOS 101: 499504, 2003 Do seedlings in gaps interact? A field test of assumptions in ESS  

E-Print Network [OSTI]

OIKOS 101: 499­504, 2003 Do seedlings in gaps interact? A field test of assumptions in ESS seed seedlings in gaps interact? A field test of assumptions in ESS seed size models. ­ Oikos 101: 499­504. ESS for the occupancy of `safe sites' or vegetation gaps. If mortality rates are high and/or frequency-independent, ESS

Silvertown, Jonathan

204

INTERAGENCY FIELD TEST & EVALUATION OF WIND TURBINE RADAR INTERFERENCE MITIGATION TECHNOLOGIES  

Broader source: Energy.gov [DOE]

These documents include a final report on the Interagency Field Test & Evaluation (IFT&E) program and summaries of three field tests designed to measure the impact of wind turbines on current air surveillance radars and the effectiveness of private sector technologies in mitigating that interference.

205

Plateau Field Test of Diesel Engine Oils with Different Viscosity Grades  

Science Journals Connector (OSTI)

The degradation of SF/CD 0W/30, CD5W/30 and SF/CD 15W/40 general engine oils has been investigated by Plateau field test with STYER 91 trucks. The experimental results have shown that on the Plateau viscosity grade of the oil hardly impacts on its service ... Keywords: Plateau, field test, viscosity grade, oil, diesel engine

Su Bin; Shi Yonggang; Gong Haifeng; Xu Jinlong; Wei Wei; Mei Lin

2011-01-01T23:59:59.000Z

206

High-Temperature Superconducting Cable Testing Gregory S. Boebinger, National High Magnetic Field Laboratory  

E-Print Network [OSTI]

High-Temperature Superconducting Cable Testing Gregory S. Boebinger, National High Magnetic Field-Temperature Superconducting (HTS) Cables are desirable for application in large high-field magnets (>20 T), especially when). Of the three HTS magnet cable concepts emerging, the Conductor On Round Core was the first that was tested

Weston, Ken

207

DOE-Sponsored Field Test Finds Potential for Permanent Storage of CO2 in  

Broader source: Energy.gov (indexed) [DOE]

Field Test Finds Potential for Permanent Storage of Field Test Finds Potential for Permanent Storage of CO2 in Lignite Seams DOE-Sponsored Field Test Finds Potential for Permanent Storage of CO2 in Lignite Seams November 4, 2010 - 1:00pm Addthis Washington, DC - A field test sponsored by the U.S. Department of Energy (DOE) has demonstrated that opportunities to permanently store carbon in unmineable seams of lignite may be more widespread than previously documented. This finding supports national efforts to address climate change through long-term storage of CO2 in underground geologic reservoirs. Lowering the core barrel at the PCOR Partnership lignite site.The PCOR Partnership, one of seven partnerships in DOE's Regional Carbon Sequestration Partnership Program, collaborated with Eagle Operating Inc. (Kenmare, N.D.) to complete the field test in Burke County, N.D. In March

208

DOE-Sponsored Field Test Demonstrates Viability of Simultaneous CO2 Storage  

Broader source: Energy.gov (indexed) [DOE]

Field Test Demonstrates Viability of Simultaneous CO2 Field Test Demonstrates Viability of Simultaneous CO2 Storage and Enhanced Oil Recovery in Carbonate Reservoirs DOE-Sponsored Field Test Demonstrates Viability of Simultaneous CO2 Storage and Enhanced Oil Recovery in Carbonate Reservoirs June 28, 2010 - 1:00pm Addthis Washington, DC - A field test conducted by a U.S. Department of Energy (DOE) team of regional partners has demonstrated that using carbon dioxide (CO2) in an enhanced oil recovery method dubbed "huff-and-puff" can help assess the carbon sequestration potential of geologic formations while tapping America's valuable oil resources. The Plains CO2 Reduction (PCOR) Partnership, one of seven in DOE's Regional Carbon Sequestration Partnership program, collaborated with Eagle Operating Inc. to complete the test in the Northwest McGregor Oil Field in Williams

209

I(DDQ) testing of field programmable gate arrays  

E-Print Network [OSTI]

been focused on using the traditional stuck-at fault model. However, recently it has been shown that this model is inadequate as bridging faults play a dominant role in CMOS technology. The objective of this research is to develop an IDDQ-based test...

Zhao, Lan

2012-06-07T23:59:59.000Z

210

National Aeronautics and Space Administration Analog Missions and Field Tests  

E-Print Network [OSTI]

the habitat while wearing spacesuits. Testing in the antarctic simulated what it would be like for astronauts. The Florida Keys National Marine Sanctuary, home of the National Oceanic and Atmospheric Administration Marine Sanctuary, about 62 feet beneath the surface. A surface buoy provides connections for power, life

211

A comprehensive test method for reprogammable field programmable gate arrays  

E-Print Network [OSTI]

the interconnection resources is shown to be 35 for all sizes of Altera FLEX8000 FPGAs. The number of reprogramming steps to test the logic resources is 6 for all sizes of Altera FLEX8000 FPGAs. This yields a total of 41 programming steps. In the largest FLEX8000 FPGA...

Ashen, David Glen

2012-06-07T23:59:59.000Z

212

Improvements in Test Protocols for Electric Vehicles to Determine Range and Total Energy Consumption  

Science Journals Connector (OSTI)

As electric vehicles have entered the market fairly recently, ... tested the same way as the ICE-driven cars with the exception that determining range is ... However, the current procedures address mainly primary...

Juhani Laurikko; Jukka Nuottimki

2013-01-01T23:59:59.000Z

213

Field Lysimeter Investigations - test results: Low-Level Waste Data Base Development Program: Test results for fiscal years 1994-1995  

SciTech Connect (OSTI)

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program, funded by the U.S. Nuclear Regulatory Commission (NRC), is (1) studying the degradation effects in EPICOR-II organic ion-exchange resins caused by radiation, (2) examining the adequacy of test procedures recommended in the Branch Technical Position on Waste Form to meet the requirements of 10 CFR 61 using solidified EPICOR-II resins, (3) obtaining performance information on solidified EPICOR-II ion-exchange resins in a disposal environment, and (4) determining the condition of EPICOR-II liners. Results of the final 2 (10 total) years of data acquisition from operation of the field testing are presented and discussed. During the continuing field testing, both portland type I-II cement and Dow vinyl ester-styrene waste forms are being tested in lysimeter arrays located at Argonne National Laboratory-East in Illinois and at Oak Ridge National Laboratory. The experimental equipment is described and results of waste form characterization using tests recommended by the NRC`s {open_quotes}Technical Position on Waste Form{close_quotes} are presented. The study is designed to provide continuous data on nuclide release and movement, as well as environmental conditions, over a 20-year period. At the end of the tenth year, the experiment was closed down. Examination of soil and waste forms is planned to be conducted next and will be reported later.

McConnell, J.W. Jr.; Rodgers, R.D.; Hilton, L.D.; Neilson, R.M. Jr. [and others

1996-06-01T23:59:59.000Z

214

Field lysimeter investigations - test results. Low-level waste data base development program: Test results for fiscal years 1986, 1987, 1988, and 1989  

SciTech Connect (OSTI)

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program, funded by the U.S. Nuclear Regulatory Commission (NRC), is (a) studying the degradation effects in EPICOR-II organic ion-exchange resins caused by radiation, (b) examining the adequacy of test procedures recommended in the Branch Technical Position on Waste Form to meet the requirements of 10 CFR 61 using solidified EPICOR-II resins, (c) obtaining performance information on solidified EPICOR-II ion-exchange resins in a disposal environment, and (d) determining the condition of EPICOR-II liners. Results of the first 4 years of data acquisition from the field testing are presented and discussed. During the continuing field testing, both Portland type I-II cement and Dow vinyl ester-styrene waste forms are being tested in lysimeter arrays located at Argonne National Laboratory-East in Illinois and at Oak Ridge National Laboratory. The experimental equipment is described and results of waste form characterization using tests recommended by the NRC`s {open_quotes}Technical Position on Waste Form{close_quotes} are presented. The study is designed to provide continuous data on nuclide release and movement, as well as environmental conditions, over a 20-year period.

McConnell, J.W. Jr.; Rogers, R.D.; Findlay, M.W.; Davis, E.C.; Jastrow, J.D.; Neilson, R.M. Jr.; Hilton, L.D.

1995-05-01T23:59:59.000Z

215

Field Lysimeter Investigations -- Test results. Low-Level Waste Data Base Development Program: Test results for fiscal years 1990, 1991, 1992, and 1993; Volume 2  

SciTech Connect (OSTI)

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program, funded by the US Nuclear Regulatory Commission (NRC), is (a) studying the degradation effects in EPICOR-II organic ion-exchange resins caused by radiation, (b) examining the adequacy of test procedures recommended in the Branch Technical Position on Waste Form to meet the requirements of 10 CFR 61 using solidified EPICOR-II resins, (c) obtaining performance information on solidified EPICOR-II ion-exchange resins in a disposal environment, and (d) determining the condition of EPICOR-II liners. Results of the second 4 years of data acquisition from the field testing are presented and discussed. During the continuing field testing, both portland type 1--2 cement and Dow vinyl ester-styrene waste forms are being tested in lysimeter arrays located at Argonne National Laboratory-East in Illinois and at Oak Ridge National Laboratory. The experimental equipment is described and results of waste form characterization using tests recommended by the NRC`s ``Technical Position on Waste Form`` are presented. The study is designed to provide continuous data on nuclide release and movement, as well as environmental conditions, over a 20-year period.

McConnell, J.W. Jr.; Rogers, R.D.; Brey, R.R.; Neilson, R.M. Jr.; Hilton, L.D. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States). Idaho National Engineering Lab.; Jastrow, J.D. [Argonne National Lab., IL (United States); Wickliff Hicks, D.S.; Sanford, W.E. [Oak Ridge National Lab., TN (United States); Sullivan, T.M. [Brookhaven National Lab., Upton, NY (United States)

1995-12-01T23:59:59.000Z

216

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect (OSTI)

Brayton Point Unit 1 was successfully tested for applicability of activated carbon injection as a mercury control technology. Test results from this site have enabled a thorough evaluation of the impacts of future mercury regulations to Brayton Point Unit 1, including performance, estimated cost, and operation data. This unit has variable (29-75%) native mercury removal, thus it was important to understand the impacts of process variables and activated carbon on mercury capture. The team responsible for executing this program included: (1) Plant and PG&E National Energy Group corporate personnel; (2) Electric Power Research Institute (EPRI); (3) United States Department of Energy National Energy Technology Laboratory (DOE/NETL); (4) ADA-ES, Inc.; (5) NORIT Americas, Inc.; (6) Apogee Scientific, Inc.; (7) TRC Environmental Corporation; (8) URS Corporation; (9) Quinapoxet Solutions; (10) Energy and Environmental Strategies (EES); and (11) Reaction Engineering International (REI). The technical support of all of these entities came together to make this program achieve its goals. Overall, the objectives of this field test program were to determine the impact of activated carbon injection on mercury control and balance-of-plant processes on Brayton Point Unit 1. Brayton Point Unit 1 is a 250-MW unit that fires a low-sulfur eastern bituminous coal. Particulate control is achieved by two electrostatic precipitators (ESPs) in series. The full-scale tests were conducted on one-half of the flue gas stream (nominally 125 MW). Mercury control sorbents were injected in between the two ESPs. The residence time from the injection grid to the second ESP was approximately 0.5 seconds. In preparation for the full-scale tests, 12 different sorbents were evaluated in a slipstream of flue gas via a packed-bed field test apparatus for mercury adsorption. Results from these tests were used to determine the five carbon-based sorbents that were tested at full-scale. Conditions of interest that were varied included SO{sub 3} conditioning on/off, injection concentrations, and distribution spray patterns. The original test plan called for parametric testing of NORIT FGD carbon at 1, 3, and 10 lbs/MMacf. These injection concentrations were estimated based on results from the Pleasant Prairie tests that showed no additional mercury removal when injection concentrations were increased above 10 lbs/MMacf. The Brayton Point parametric test data indicated that higher injection concentrations would achieve higher removal efficiencies and should be tested. The test plan was altered to include testing at 20 lbs/MMacf. The first test at this higher rate showed very high removal across the second ESP (>80%). Unlike the ''ceiling'' phenomenon witnessed at Pleasant Prairie, increasing sorbent injection concentration resulted in further capture of vapor-phase mercury. The final phase of field-testing was a 10-day period of continuous injection of NORIT FGD carbon. During the first five days, the injection concentration was held at 10 lbs/MMacf, followed by nominally five days of testing at an injection concentration of 20 lbs/MMacf. The mercury removal, as measured by the semi-continuous emission monitors (S-CEM), varied between 78% and 95% during the 10 lbs/MMacf period and increased to >97% when the injection concentration was increased to 20 lbs/MMacf. During the long-term testing period, mercury measurements following EPA's draft Ontario Hydro method were conducted by TRC Environmental Corporation at both 10 and 20 lbs/MMacf test conditions. The Ontario Hydro data showed that the particulate mercury removal was similar between the two conditions of 10 or 20 lbs/MMacf and removal efficiencies were greater than 99%. Elemental mercury was not detected in any samples, so no conclusions as to its removal can be drawn. Removal of oxidized mercury, on the other hand, increased from 68% to 93% with the higher injection concentration. These removal rates agreed well with the S-CEM results.

Michael D. Durham

2005-03-17T23:59:59.000Z

217

Chemical resistance determination test scheme and rating system development for industrial glove evaluation  

E-Print Network [OSTI]

CHEMICAL RESISTANCE DETERMINATION TEST SCHEME AND RATING SYSTEM DEVELOPMENT FOR INDUSTRIAL GLOVE EVALUATION A Thesis by WILLIAM JOSEPH CORNILS Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1981 Major Subject: Industrial Hygiene CHEMICAL RESISTANCE DETERMINATION TEST SCHEME AND RATING SYSTEM DEVELOPMENT FOR INDUSTRIAL GLOVE EVALUATION A Thesis by WILLIAM JOSEPH CORNILS Approved...

Cornils, William Joseph

2012-06-07T23:59:59.000Z

218

CX-100 and TX-100 blade field tests.  

SciTech Connect (OSTI)

In support of the DOE Low Wind Speed Turbine (LWST) program two of the three Micon 65/13M wind turbines at the USDA Agricultural Research Service (ARS) center in Bushland, Texas will be used to test two sets of experimental blades, the CX-100 and TX-100. The blade aerodynamic and structural characterization, meteorological inflow and wind turbine structural response will be monitored with an array of 75 instruments: 33 to characterize the blades, 15 to characterize the inflow, and 27 to characterize the time-varying state of the turbine. For both tests, data will be sampled at a rate of 30 Hz using the ATLAS II (Accurate GPS Time-Linked Data Acquisition System) data acquisition system. The system features a time-synchronized continuous data stream and telemetered data from the turbine rotor. This paper documents the instruments and infrastructure that have been developed to monitor these blades, turbines and inflow.

Holman, Adam (USDA-Agriculture Research Service, Bushland, TX); Jones, Perry L.; Zayas, Jose R.

2005-12-01T23:59:59.000Z

219

Evaluation of naturally fractured gas shale production utilizing multiwell transient tests: A field study  

SciTech Connect (OSTI)

A series of multiple well transient tests were conducted in a Devonian shale gas field in Meigs County, Ohio. Production parameters were quantified and it was determined that the reservoir is highly anisotropic, which is a significant factor in calculating half-fracture length from pressure transient data. Three stimulation treatments, including conventional explosive shooting, nitrogen foam frac, and high energy gas frac (HEGF), were compared on the basis of overall effectiveness and performance. Based on the evaluation of results, the nitrogen foam frac provided the most improved productivity. The study provided new type curves and analytical solutions for the mathematical representation of naturally fractured reservoirs and confirmed that the shale reservoir in Meigs County can be modeled as a dual porosity system using pseudosteady-state gas transfer from the matrix to the fracture system.

Chen, C.C.; Alam, J.; Blanton, T.L.; Vozniak, J.P.

1984-05-01T23:59:59.000Z

220

Power and Sample Size Determination for a Stepwise Test Procedure for Finding the Maximum Safe Dose  

E-Print Network [OSTI]

Power and Sample Size Determination for a Stepwise Test Procedure for Finding the Maximum Safe Dose This paper addresses the problem of power and sample size calculation for a stepwise multiple test procedure of a compound. A general expression for the power of this procedure is derived. It is used to find the minimum

Tamhane, Ajit C.

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Development of a simple quantitative test for lack of field emission orthodoxy  

Science Journals Connector (OSTI)

...117 Development of a simple quantitative test for lack of field emission orthodoxy Richard...describes development of a simple quantitative test for whether FE data are incompatible with...are internally self-consistent. This test is then applied to 19 post-1975 datasets...

2013-01-01T23:59:59.000Z

222

First tests of a Micromegas TPC in a magnetic field  

SciTech Connect (OSTI)

Since the summer of 2003, a large Micromegas TPC prototype (1000 channels, 50 cm drift, 50 cm diameter) has been operated in a 2T superconducting magnet at Saclay. A description of this apparatus and first results from cosmic ray tests are presented. Additional measurements using simpler detectors with a laser source, an X-ray gun and radio-active sources are discussed. Drift velocity and gain measurements, electron attachment and aging studies for a Micromegas TPC are presented. In particular, using simulations and measurements, it is shown that an $Argon-CF_4$ mixture is optimal for operation at a future Linear Collider.

Colas, P.; Giomataris, I.; Lepeltier, V.; Ronan, M.

2004-12-10T23:59:59.000Z

223

Land reclamation on the Nevada Test Site: A field tour  

SciTech Connect (OSTI)

An all-day tour to observe and land reclamation on the Nevada Test Site was conducted in conjunction with the 8th Wildland Shrub and Arid Land Restoration Symposium. Tour participants were introduced to the US Department of Energy reclamation programs for Yucca Mountain Site Characterization Project and Treatability Studies for Soil Media (TSSM) Project. The tour consisted of several stops that covered a variety of topics and studies including revegetation by seeding, topsoil stockpile stabilization, erosion control, shrub transplanting, shrub herbivory, irrigation, mulching, water harvesting, and weather monitoring.

Winkel, V.K.; Ostler, W.K.

1993-12-31T23:59:59.000Z

224

Fuel Assembly Shaker Test for Determining Loads on a PWR Assembly under  

Broader source: Energy.gov (indexed) [DOE]

Assembly Shaker Test for Determining Loads on a PWR Assembly Assembly Shaker Test for Determining Loads on a PWR Assembly under Surrogate Normal Conditions of Truck Transport R0.1 Fuel Assembly Shaker Test for Determining Loads on a PWR Assembly under Surrogate Normal Conditions of Truck Transport R0.1 The United States current approach of long-term storage at its nuclear power plants and independent spent fuel storage installation, and deferred transportation of used nuclear fuel (UNF), along with the trend of nuclear power plants using reactor fuel for a longer time, creates questions concerning the ability of this aged, high-burnup fuel to withstand stresses and strains seen during normal conditions of transport from its current location to a future consolidated storage facility or permanent repository. UNFD R&D conducted testing employing surrogate instrumented

225

Field testing of new multilateral drilling and completion technology at the Rocky Mountain Oilfield Testing Center  

SciTech Connect (OSTI)

The Rocky Mountain Oilfield Testing Center (RMOTC) has played an important role in bringing new multilateral well technology to the marketplace. Multilateral technology is more complex than most new technologies being brought to the oilfield. It is very difficult to test new designs in the laboratory or conventional test wells. They must be tested downhole in specialized wells to work out design and procedural details. Most of the applications for multilateral technology are in high cost drilling areas, such as offshore or in remote, environmentally sensitive areas. For this reason, opportunities for testing the new technology in the course of routine drilling and completion operations are scarce. Operators are not willing to risk expensive rig time, or losing a wellbore itself, on a test. RMOTC offers a neutral site where the technology can be tested in a relatively low cost environment. There are two drilling rigs and three workover and completion rigs available. Most associated services such as warehouse, roustabouts, backhoe, welders, and mechanics are also available on site, while specialized oilfield services and machine shops are available in nearby Casper. Technologies such as the hollow whipstock, adjustable stabilizer, downhole kickoff assembly, single trip sidetrack tool, stacked multidrain system, rotary steerable systems, and procedures for abandoning an open hole lateral have benefited through the use of RMOTC`s facilities. This paper details the capabilities of the new technologies and the benefits of testing them in a real oilfield environment before taking them to market.

Giangiacomo, L.A. [Fluor Daniel NPOSR, Inc., Casper, WY (United States). Rocky Mountain Oilfield Testing Center

1998-12-31T23:59:59.000Z

226

Combined Experiment Phase 1. [Horizontal axis wind turbines: wind tunnel testing versus field testing  

SciTech Connect (OSTI)

How does wind tunnel airfoil data differ from the airfoil performance on an operating horizontal axis wind turbine (HAWT) The National Renewable Energy laboratory has been conducting a comprehensive test program focused on answering this question and understanding the basic fluid mechanics of rotating HAWT stall aerodynamics. The basic approach was to instrument a wind rotor, using an airfoil that was well documented by wind tunnel tests, and measure operating pressure distributions on the rotating blade. Based an the integrated values of the pressure data, airfoil performance coefficients were obtained, and comparisons were made between the rotating data and the wind tunnel data. Care was taken to the aerodynamic and geometric differences between the rotating and the wind tunnel models. This is the first of two reports describing the Combined Experiment Program and its results. This Phase I report covers background information such as test setup and instrumentation. It also includes wind tunnel test results and roughness testing.

Butterfield, C.P.; Musial, W.P.; Simms, D.A.

1992-10-01T23:59:59.000Z

227

Waste Tank Size Determination for the Hanford River Protection Project Cold Test, Training, and Mockup Facility  

SciTech Connect (OSTI)

The objective of the study was to determine the minimum tank size for the Cold Test Facility process testing of Hanford tank waste. This facility would support retrieval of waste in 75-ft-diameter DSTs with mixer pumps and SSTs with fluidic mixers. The cold test model will use full-scale mixer pumps, transfer pumps, and equipment with simulated waste. The study evaluated the acceptability of data for a range of tank diameters and depths and included identifying how the test data would be extrapolated to predict results for a full-size tank.

Onishi, Yasuo; Wells, Beric E.; Kuhn, William L.

2001-03-30T23:59:59.000Z

228

Wood processing wastes recovery and composted product field test  

SciTech Connect (OSTI)

Lumber mill waste, more than 3,000 tons per month, is one of the main waste sources in I-Lan area. Most of the lumber mill waste is sawdust which takes a large parts of organic-containing wastes in I-Lan county. Wastes from seafood plants around the Sueou Harbor causes a treatment problem because of their high nitrogen and phosphorous concentrations. Furthermore, the distiller-by products in I-Lan Winery are easy to become spoiled and result in odor. In this study, the compost method is suggested to deal with these waste problems and make energy recovery. Microorganisms incubating in the laboratory provide the stable seed needed for composting. Flowers and vegetable raising are scheduled to be used in field to verify the efficiency of the products. The optimal combination ration of wastes and operation criteria then will be concluded in this study after economic analyzing. The results show that the Zinnia elegans leaves growth is relative with organic fertilizer. It can also be illustrated from the statistical value that the F value is 19.4 and above the critical value 9.4.

Chang, C.T.; Lin, K.L. [National Inst. of I-Lan Agriculture and Technology, I-Lan City (Taiwan, Province of China)

1997-12-31T23:59:59.000Z

229

DOE Targets Rural Indiana Geologic Formation for CO2 Storage Field Test |  

Broader source: Energy.gov (indexed) [DOE]

DOE Targets Rural Indiana Geologic Formation for CO2 Storage Field DOE Targets Rural Indiana Geologic Formation for CO2 Storage Field Test DOE Targets Rural Indiana Geologic Formation for CO2 Storage Field Test November 12, 2009 - 12:00pm Addthis Washington, DC - A U.S. Department of Energy (DOE) team of regional partners has begun injecting 8,000 tons of carbon dioxide (CO2) to evaluate the carbon storage potential and test the enhanced oil recovery (EOR) potential of the Mississippian-aged Clore Formation in Posey County, Ind. Carbon capture and storage (CCS) is seen as a key technology for reducing greenhouse gas emissions and helping to mitigate climate change. The injection, which is expected to last 6-8 months, is an integral step in DOE's Regional Carbon Sequestration Partnership program. The Midwest Geological Sequestration Consortium (MGSC) is conducting the field test to

230

Field Scale Test and Verification of CHP System at the Ritz Carlton, San Francisco, August 2007  

Broader source: Energy.gov [DOE]

ITP Industrial Distributed Energy: National Account Energy Alliance Final Report for the Field Scale Test and Verification of a PureComfort 240M Combined Heat and Power System at the Ritz Carlton, San Francisco

231

First-of-a-Kind Sequestration Field Test Begins in West Virginia |  

Broader source: Energy.gov (indexed) [DOE]

First-of-a-Kind Sequestration Field Test Begins in West Virginia First-of-a-Kind Sequestration Field Test Begins in West Virginia First-of-a-Kind Sequestration Field Test Begins in West Virginia September 8, 2009 - 1:00pm Addthis Washington, DC - Injection of carbon dioxide (CO2) began today in a first-of-a-kind field trial of enhanced coalbed methane recovery with simultaneous CO2 sequestration in an unmineable coal seam. The ultimate goal of the U.S. Department of Energy-sponsored project is to help mitigate climate change by providing an effective and economic means to permanently store CO2 in unmineable coal seams. CONSOL Energy Inc., West Virginia University, and the National Energy Technology Laboratory (NETL) are collaborating in the $13 million field trial, located in Marshall County, W.Va. The site was chosen because of its

232

Short-term electricity dispatch optimization of Ertan hydropower plant based on data by field tests  

Science Journals Connector (OSTI)

A short-term electricity dispatch optimization program required by the Ertan hydropower plant is developed to maximize hydropower production. Three field tests in various operating heads were carried out in the period of May 2009 to March 2010. Based on data of five test conditions three operating zones for units in various operating heads were proposed. A short-term electricity dispatch optimization model was developed with physical and operational constraints. Unit commitment strategy was put forward for model solution in which unit statuses and output statuses were classified. The strategy aimed at formulating better unit commitment plan according to forecasted load demand ancillary service requirements and initial operating status. The model and the strategy were verified by real cases. The results show that the optimal load distribution among units at every interval can be easily solved by the genetic algorithm based on a fixed unit commitment plan. Schedules are developed with higher average generation efficiency. Units can also be scheduled to operate for a less time within the rough zone and the second feasible zone. The proposed method is already operational for dispatch engineers of the Ertan hydropower plant to determine half-hourly schedules in one day.

Chao Ma; Haijun Wang; Jijian Lian

2011-01-01T23:59:59.000Z

233

Field tests and new design procedure for laterally loaded drilled shafts in clay  

E-Print Network [OSTI]

FIELD TESTS AND NEW DESIGN PROCEDURE FOR LATERALLY LOADED DRILLED SHAFTS IN CLAY A Thesis by l1ARK WILLIAM BIERSCHWALE Submitted to ihe Graduate College Texas A8M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE December 1980 Major Subject: Civil Engineering FIELD TESTS AND NEW DESIGN PROCEDURE FOR LATERALLY LOADED DRILLED SHAFTS IN CLAY A Thesis by NARK WILLIAM BIERSCHWALE Approved as to style and content by: Harry M. Coyle - Chairman...

Bierschwale, Mark W.

1980-01-01T23:59:59.000Z

234

Officer competency in the Texas Standardized Field Sobriety Testing Program: a quantitative study  

E-Print Network [OSTI]

OFFICER COMPETENCY IN THE TEXAS STANDARDIZED FIELD SOBRIETY TESTING PROGRAM: A QUANTITATIVE STUDY A Thesis by RODNEY JOSEPH MERKLEY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 2002 Major Subject' Educational Human Resource Development OFFICER COMPETENCY IN THE TEXAS STANDARDIZED FIELD SOBRIETY TESTING PROGRAM: A QUANTITATIVE STUDY A Thesis by RODNEY JOSEPH MERKLEY Submitted to Texas...

Merkley, Rodney Joseph

2012-06-07T23:59:59.000Z

235

Field Test of Combined Desiccant-Evaporator Cycle Providing Lower Dew Points and Enhanced Dehumidification  

E-Print Network [OSTI]

Field Test of Combined Desiccant-Evaporator Cycle Providing Lower Dew Points and Enhanced Dehumidification Charles J. Cromer, PhD, P.E.; Florida Solar Energy Center, 1679 Clearlake Road, Cocoa, FL, 321-638-1445, charlie... of difficult criteria, some with more success than others. Combined Cycle with Desiccant and AC Coil This paper describes the field testing of a novel air conditioning desiccant cycle. This cycle uses a desiccant to move moisture within the air...

Cromer, C. J.

2006-01-01T23:59:59.000Z

236

Light field and crosshair quality assurance test using a simple lens system  

SciTech Connect (OSTI)

We describe here a simple lens system to test the positioning of the field light source and mylar crosshair for radiation therapy linear accelerators. Ideally the light source for the field light and the crosshair should be centered on the axis of rotation of the collimator. The traditional method for testing this coincidence uses the shadow of the crosshair caused by the field light source. The shadow of the crosshair is dependent on the position of both the field light source and mylar crosshair. Geometrically it is possible for the field light source and the mylar crosshair to be off the axis of rotation of the collimator and still cause the shadow of the crosshair to be on the axis of rotation at some distance. Using a lens system the motion of the field light source and crosshair can be observed in sharp focus independently of one another as the collimator is rotated.

Hadley, Scott W.; Lam, Kwok [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan 48109-0010 (United States)

2006-04-15T23:59:59.000Z

237

Determination of the length and compass orientation of hydraulic fractures by pulse testing  

E-Print Network [OSTI]

S3HAIDVHi OIlflVHOAH i0 NOIlVIN3IHO SSVHWOO QNV HlBN31 3Wl iO NOIlVNIWH3l30 DETERMINATION OF THE LENGTH AND COMPASS ORIENTATION OF HYDRAULIC FRACTURES BY PULSE TESTING A Thesis by MADAN MOHAN MANOHAR Approved as to Style and Content by: Wi... liam J. Lee (Ch ai rman of Commi t tee ) Le a M. Je Member) Richard A. Morse (Member) D. Yon Gonten ( d of Department) December 1984 ABSTRACT Determination of the Length and Compass Drientat1on of Hydraulic Fractures by Pulse Testing...

Manohar, Madan Mohan

2012-06-07T23:59:59.000Z

238

Development of spiral notch torsion test: A new Fracture mechanics approach to determination of KISCC  

SciTech Connect (OSTI)

SNTT utilizes an extremely innovative concept of testing round-rod specimens having a V-grooved spiral notch line with a 45 a-pitch angle. The paper discusses the validity of SNTT in determining the fracture toughness, KIC, as established at ORNL. The paper also presents preliminary results of a collaborative research program of Monash University, NRL, ORNL and DSTO, for development and use of the novel technique of Spiral Notch Torsion Test (SNTT) for determination of threshold stress intensity for stress corrosion cracking, i.e., KISCC. SNTT experiments have been carried out in chloride and air environments, using fatigue pre-cracked SNTT specimens of Al-alloy, 7075.

Wang, Jy-An John [ORNL; Singh, R. K. [Monash University, Australia; Bayles, Robert [Naval Research Laboratory, Washington, D.C.; Knight, S. P. [Monash University, Australia; Hinton, B. R.W. [Defence Science and Technology Organisation, Australia; Muddle, B. C. [Monash University, Australia

2007-11-01T23:59:59.000Z

239

Using Whole-House Field Tests to Empirically Derive Moisture Buffering Model Inputs  

SciTech Connect (OSTI)

Building energy simulations can be used to predict a building's interior conditions, along with the energy use associated with keeping these conditions comfortable. These models simulate the loads on the building (e.g., internal gains, envelope heat transfer), determine the operation of the space conditioning equipment, and then calculate the building's temperature and humidity throughout the year. The indoor temperature and humidity are affected not only by the loads and the space conditioning equipment, but also by the capacitance of the building materials, which buffer changes in temperature and humidity. This research developed an empirical method to extract whole-house model inputs for use with a more accurate moisture capacitance model (the effective moisture penetration depth model). The experimental approach was to subject the materials in the house to a square-wave relative humidity profile, measure all of the moisture transfer terms (e.g., infiltration, air conditioner condensate) and calculate the only unmeasured term: the moisture absorption into the materials. After validating the method with laboratory measurements, we performed the tests in a field house. A least-squares fit of an analytical solution to the measured moisture absorption curves was used to determine the three independent model parameters representing the moisture buffering potential of this house and its furnishings. Follow on tests with realistic latent and sensible loads showed good agreement with the derived parameters, especially compared to the commonly-used effective capacitance approach. These results show that the EMPD model, once the inputs are known, is an accurate moisture buffering model.

Woods, J.; Winkler, J.; Christensen, D.; Hancock, E.

2014-08-01T23:59:59.000Z

240

Pilot test of steam with additives at Midway-Sunset field, California  

SciTech Connect (OSTI)

This work graphically illustrates the results of a pilot test by the CLD Group Inc., Santa Fe Energy, Conoco, Texaco, and the U.S. Department of Energy. The purpose of the pilot test was to improve efficiency of steam drive enhanced oil recovery with blocking foams in the Midway-Sunset field of California.

Hammershaimb, E.C.

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

VAPOR COMPRESSION HEAT PUMP SYSTEM FIELD TESTS AT THE TECH COMPLEX  

E-Print Network [OSTI]

323 CHAPTER 17 VAPOR COMPRESSION HEAT PUMP SYSTEM FIELD TESTS AT THE TECH COMPLEX \\B E Van D for several novel and conventional heat pump systems for space conditioning and water heating. Systems tested include the Annual Cycle Energy System (ACES), solar assisted heat pumps (SAHP) both parallel and series

Oak Ridge National Laboratory

242

Project Impact Assessments: Building America FY14 Field Test Technical Support- 2014 BTO Peer Review  

Broader source: Energy.gov [DOE]

Presenter: Lieko Earle, National Renewable Energy Laboratory The goal of this project is for the National Renewable Energy Laboratory to provide extensive, hands-on technical support to Building America teams in the areas of experiment design, provision of research-grade measurement hardware, energy modeling, and analysis. Building Americas field testsregularly conducted by both Building America teams and national laboratoriesdemonstrate the programs best house system innovations. The tests enable cost-effective evaluation of real-world performance and help ensure that all Building America field tests result in high-impact findings that push builders and homeowners to higher levels of savings.

243

Field Laboratory in the Osage Reservation -- Determination of the Status of Oil and Gas Operations: Task 1. Development of Survey Procedures and Protocols  

SciTech Connect (OSTI)

Procedures and protocols were developed for the determination of the status of oil, gas, and other mineral operations on the Osage Mineral Reservation Estate. The strategy for surveying Osage County, Oklahoma, was developed and then tested in the field. Two Osage Tribal Council members and two Native American college students (who are members of the Osage Tribe) were trained in the field as a test of the procedures and protocols developed in Task 1. Active and inactive surface mining operations, industrial sites, and hydrocarbon-producing fields were located on maps of the county, which was divided into four more or less equal areas for future investigation. Field testing of the procedures, protocols, and training was successful. No significant damage was found at petroleum production operations in a relatively new production operation and in a mature waterflood operation.

Carroll, Herbert B.; Johnson, William I.

1999-04-27T23:59:59.000Z

244

Standard test method for quantitative determination of americium 241 in plutonium by Gamma-Ray spectrometry  

E-Print Network [OSTI]

1.1 This test method covers the quantitative determination of americium 241 by gamma-ray spectrometry in plutonium nitrate solution samples that do not contain significant amounts of radioactive fission products or other high specific activity gamma-ray emitters. 1.2 This test method can be used to determine the americium 241 in samples of plutonium metal, oxide and other solid forms, when the solid is appropriately sampled and dissolved. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

American Society for Testing and Materials. Philadelphia

1994-01-01T23:59:59.000Z

245

Fireside corrosion testing of candidate superheater tube alloys, coatings, and claddings -- Phase 2 field testing  

SciTech Connect (OSTI)

In Phase 1 of this project, laboratory experiments were performed on a variety of developmental and commercial tubing alloys and claddings by exposing them to fireside corrosion tests which simulated a superheater or reheater in a coal-fired boiler. Phase 2 (in situ testing) has exposed samples of 347, RA85H, HR3C, RA253MA, Fe{sub 3}Al + 5Cr, Ta-modified 310, NF 709, 690 clad, 671 clad, and 800HT for up to approximately 16,000 hours to the actual operating conditions of a 250-MW, coal-fired boiler. The samples were installed on air-cooled, retractable corrosion probes, installed in the reheater cavity, and controlled to the operating metal temperatures of an existing and advanced-cycle, coal-fired boiler. Samples of each alloy were exposed for 4,483, 11,348, and 15,883 hours of operation. The present results are for the metallurgical examination of the corrosion probe samples after the full 15,883 hours of exposure. A previous topical report has been issued for the 4,483 hours of exposure.

Blough, J.L.; Seitz, W.W.; Girshik, A. [Foster Wheeler Development Corp., Livingston, NJ (United States)

1998-06-01T23:59:59.000Z

246

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect (OSTI)

PG&E NEG Salem Harbor Station Unit 1 was successfully tested for applicability of activated carbon injection as a mercury control technology. Test results from this site have enabled a thorough evaluation of mercury control at Salem Harbor Unit 1, including performance, estimated cost, and operation data. This unit has very high native mercury removal, thus it was important to understand the impacts of process variables on native mercury capture. The team responsible for executing this program included plant and PG&E headquarters personnel, EPRI and several of its member companies, DOE, ADA, Norit Americas, Inc., Hamon Research-Cottrell, Apogee Scientific, TRC Environmental Corporation, Reaction Engineering, as well as other laboratories. The technical support of all of these entities came together to make this program achieve its goals. Overall the objectives of this field test program were to determine the mercury control and balance-of-plant impacts resulting from activated carbon injection into a full-scale ESP on Salem Harbor Unit 1, a low sulfur bituminous-coal-fired 86 MW unit. It was also important to understand the impacts of process variables on native mercury removal (>85%). One half of the gas stream was used for these tests, or 43 MWe. Activated carbon, DARCO FGD supplied by NORIT Americas, was injected upstream of the cold side ESP, just downstream of the air preheater. This allowed for approximately 1.5 seconds residence time in the duct before entering the ESP. Conditions tested in this field evaluation included the impacts of the Selective Non-Catalytic Reduction (SNCR) system on mercury capture, of unburned carbon in the fly ash, of adjusting ESP inlet flue gas temperatures, and of boiler load on mercury control. The field evaluation conducted at Salem Harbor looked at several sorbent injection concentrations at several flue gas temperatures. It was noted that at the mid temperature range of 322-327 F, the LOI (unburned carbon) lost some of its ability to capture vapor phase Hg, however activated carbon performed relatively well. At the normal operating temperatures of 298-306 F, mercury emissions from the ESP were so low that both particulate and elemental mercury were ''not detected'' at the detection limits of the Ontario Hydro method for both baseline and injection tests. The oxidized mercury however, was 95% lower at a sorbent injection concentration of 10 lbs/MMacf compared with baseline emissions. When the flue gas temperatures were increased to a range of 343-347 F, mercury removal efficiencies were limited to <25%, even at the same sorbent injection concentration. Other tests examined the impacts of fly ash LOI, operation of the SNCR system, and flue gas temperature on the native mercury capture without sorbent injection. Listed below are the main conclusions from this program: (1) SNCR on/off test showed no beneficial effect on mercury removal caused by the SNCR system. (2) At standard operating temperatures ({approx} 300 F), reducing LOI from 30-35% to 15-20% had minimal impact on Hg removal. (3) Increasing flue gas temperatures reduced Hg removal regardless of LOI concentrations at Salem Harbor (minimum LOI was 15%). Native mercury removal started to fall off at temperatures above 320 F. ACI effectiveness for mercury removal fell off at temperatures above 340 F. (4) Test method detection limits play an important role at Salem Harbor due to the low residual emissions. Examining the proposed MA rule, both the removal efficiency and the emission concentrations will be difficult to demonstrate on an ongoing basis. (5) Under tested conditions the baseline emissions met the proposed removal efficiency for 2006, but not the proposed emission concentration. ACI can meet the more-stringent 2012 emission limits, as long as measurement detection limits are lower than the Ontario Hydro method. SCEM testing was able to verify the low emissions. For ACI to perform at this level, process conditions need to match those obtained during testing.

Michael D. Durham

2004-10-01T23:59:59.000Z

247

NETL: News Release - Field Testing Underway of Remote Sensor Gas Leak  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

September 16, 2004 September 16, 2004 Field Testing Underway of Remote Sensor Gas Leak Detection Systems CASPER, WY-An extensive field test that will document and demonstrate how effective technologies are in remotely detecting natural gas leaks is being held September 13-17, as the Department of Energy simulates natural gas leaks along a predetermined course at DOE's Rocky Mountain Oilfield Testing Center (RMOTC). Low-flying aircraft, satellites and special ground vehicles carrying advanced leak detection sensors will participate as representatives of the gas industry and potential technology manufacturers observe the technologies in a real-world environment and evaluate their readiness for commercialization. The test plan was devised with strong input from an industry advisory board and test participants to compare the effectiveness of several gas-leak detection devices from ground, air and satellite based platforms.

248

Field test of a high-efficiency, automatic-defrost refrigerator-freezer  

SciTech Connect (OSTI)

Following the successful design, development, and demonstration of a high efficiency refrigerator-freezer prototype, work was done to design and manufacture pre-production units for home usage tests. The purpose of the field test and the associated market evaluation is to confirm the energy saving potential of the high-efficiency design, identify possible design deficiencies or service difficulties, and assess the consumer appeal of the new unit. The first five months of field test data have shown an average 57% decrease in energy consumption when compared to a baseline unit of convention design. This energy savings is larger than predicted by the standard DOE test procedure. No serious design or service problems have been encountered. Consumers have not been adversely affected by the larger cabinet and thicker doors, and responded favorably in an actual retail sales test to initially spending more for an energy-saving refrigerator that will reduce electric usage.

Topping, R.F.; Vineyard, E.A.

1982-01-01T23:59:59.000Z

249

Plasma engineering models of tandem mirror devices with high-field test-cell inserts  

SciTech Connect (OSTI)

Plasma physics and engineering models of tandem mirror devices operated with a high-field technology test-cell insert in the central cell, which have been incorporated recently in the TMRBAR tandem mirror reactor physics code, are described. The models include particle and energy balance in the test-cell region as well as the interactions between the test-cell particles and those flowing through the entire device. The code calculations yield consistent operating parameters for the test-cell, central cell, and end cell systems. A benchmark case for the MFTF-..cap alpha..+T configuration is presented which shows good agreement between the code results and previous calculations.

Fenstermacher, M.E.; Campbell, R.B.

1985-04-03T23:59:59.000Z

250

NEPA CX Determination SS-SC-10-01 for End Station Test Beam (ESTB)  

Broader source: Energy.gov (indexed) [DOE]

0-01 for End Station Test Beam (ESTB) 0-01 for End Station Test Beam (ESTB) National Environmental Policy Act (NEPA) Categorical Exclusion (CX) Determination A. SSO NEPA Control #: SS-SC-10-01 B. Brief Description of Proposed Action: The End Station Test Beam (ESTB) is a new experimental facility that will use 5Hz of the 120 hz 13.6 GeV electron beam from the existing Linac Coherent Light Source (LCLS) to restore test beam capabilities in End Station A (ESA), an existing building at SLAC. In Stage I of this proposal, four new kicker magnets will be added to the Beam Switchyard (BSY) to divert a small fraction of the existing LCLS beam pulses to the A-line for beam instrumentation and accelerator physics studies at full electron beam intensity. The Personnel Protection System in ESA will be

251

Test to Determine Margin-to-Failure for Hy-100 Steel with Undermatched Welds  

SciTech Connect (OSTI)

This test program was undertaken to determine the flaw tolerance and to quantify the strength margin-to-failure of high yield strength steel fillet welded specimens. The tests demonstrate adequate margin-to-failure for HY-100 specimens fabricated with matched welding systems. In the use of high yield (HY) steel materials in designs required to accommodate rapidly applied dynamic loads, the concern was raised where the possibility of decreased flaw tolerance and premature failure by unstable ductile tearing could limit their use. Tests were developed and conducted to demonstrate adequate margin-to-failure in HY-100 fillet and partial penetration welded structures. In addition, inelastic analytical predictions were performed to assess the accuracy of such predictive tools compared to actual test data. Results showed that adequate margin-to-failure exists when using matched welding systems.

K.R. Arpin; T.F. Trimble

2003-04-01T23:59:59.000Z

252

Testing of the EURATOM LCT coil in the toroidal arrangement of the International Fusion Superconducting Magnet Test Facility without external pulsed fields (standard-1) and with them (standard II) and an extended single-coil test  

SciTech Connect (OSTI)

Testing of the European LCT coil, a forced-flow NbTi coil, with the five other coils in the International Fusion Superconducting Magnet Test Facility (IFSMTF) has been in progress since the beginning of 1986. By the end of July 1987, the Euratom-LCT coil had passed a single-coil test, a test in toroidal configuration with and without poloidal field transients, and an extended single-coil test up to its design limits. In this test, the coil reached, in stable operation, a field of 9 T at 140% of rated current. It reached the short-sample values of the strands used in the cable. The coil was operated up to 8 T with and without poloidal field transients in a toroidal configuration. The mass flow rate was reduced by a factor of 5 compared with the design value without any visible impact on stability. Averaged ac losses (winding, 14 W; case, 7 W) were measured under LCT specified poloidal field pulses, and the findings agreed with those of the short-sample measurements. The mechanical properties behaved as predicted by calculations. No global movement of the winding in the coil case was found, although the coil has already experienced 50% (14MN) of the maximum out-of-plane force. The operating limits were determined by measuring the current-sharing temperature. It was found that the helium mass flow rate had an impact on the hot-spot temperature of a normal region. All results obtained demonstrate that the applied technology has achieved reliable engineering standards.

Friesinger, G.; Gauss, S.; Komarek, P.; Lubell, M.S.; McManamy, T.J.; Maurer, W.; Shen, S.S.; Siewerdt, L.; Ulbricht, A.; Wuchner, F.

1988-03-01T23:59:59.000Z

253

High-Voltage Broadband-Over-Powerline (HV-BPL) Field Test Report | Open  

Open Energy Info (EERE)

High-Voltage Broadband-Over-Powerline (HV-BPL) Field Test Report High-Voltage Broadband-Over-Powerline (HV-BPL) Field Test Report Jump to: navigation, search Tool Summary LAUNCH TOOL Name: High-Voltage Broadband-Over-Powerline (HV-BPL) Field Test Report Focus Area: Crosscutting Topics: Policy Impacts Website: www.netl.doe.gov/smartgrid/referenceshelf/reports/HV-BPL_Final_Report. Equivalent URI: cleanenergysolutions.org/content/high-voltage-broadband-over-powerline Language: English Policies: "Deployment Programs,Financial Incentives" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Technical Assistance This reports details findings from a pilot High Voltage Broadband over Power Line (HV-BPL) program, an effort to develop a disruptive technology

254

Zeolite pore size determination by methanol-to-gasoline conversion test  

SciTech Connect (OSTI)

The conversion of methanol over a shape selective zeolite to high octane gasoline is a well known process. In this work, a methanol-to-gasoline (MTG) conversion test is utilized for the pore size determination of zeolites with active sites. The dimension of a zeolite`s pores is revealed by the size distribution of its MTG hydrocarbon products. A simple fixed bed MTG test unit capable of on-line sampling for direct gas chromatographic analysis and the collection of liquid and gaseous products for GC-MS analysis is described. The size distributions of MTG hydrocarbon products are presented for several small, intermediate, and large pore zeolites.

Yuen, L.; Zones, S.I. [Chevron Research and Technology Co., Richmond, CA (United States)

1996-10-01T23:59:59.000Z

255

Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)  

E-Print Network [OSTI]

1.1 This test method covers the quantitative determination of the susceptibility of metallic materials to hydrogen embrittlement, when exposed to high pressure gaseous hydrogen. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

American Society for Testing and Materials. Philadelphia

2006-01-01T23:59:59.000Z

256

Standard test method for determination of technetium-99 in uranium hexafluoride by liquid scintillation counting  

E-Print Network [OSTI]

1.1 This test method is a quantitative method used to determine technetium-99 (99Tc) in uranium hexafluoride (UF6) by liquid scintillation counting. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

American Society for Testing and Materials. Philadelphia

2008-01-01T23:59:59.000Z

257

Concept Testing and Development at the Raft River Geothermal Field, Idaho  

Broader source: Energy.gov [DOE]

Geothermal Technologies Program 2010 Peer Review Concept Testing and Development at the Raft River Geothermal Field, Idaho, for the Engineered Geothermal Systems Demonstration Projects and Low Temperature Exploration and Demonstrations Project Track. Objective to Develop and demonstrate the techniques required to form and sustain EGS reservoirs including combined thermal and hydraulic stimulation and numerical modeling and Improve the performance and output of the Raft River geothermal field by increasing production or injectivity.

258

Determination of a Geothermal Energy Field with Audio-Magnetotelluric (AMT) Data at the South of Manisa, Turkey  

Science Journals Connector (OSTI)

In this study, we present an investigation of the geothermal energy field and its energy potential at the south of Manisa in Turkey. The resistivities of the geothermal energy field have a key role in determining...

Hatice Karakilcik

2014-01-01T23:59:59.000Z

259

Propagation of Test Particles and Scalar Fields on a Class of Wormhole Space-Times  

E-Print Network [OSTI]

In this paper, we consider the problem of test particles and test scalar fields propagating on the background of a class of wormhole space-times. For test particles, we solve for arbitrary causal geodesics in terms of integrals which are solved numerically. These integrals are parametrized by the radius and shape of the wormhole throat as well as the initial conditions of the geodesic trajectory. In terms of these parameters, we compute the conditions for the geodesic to traverse the wormhole, to be reflected by the wormhole's potential or to be captured on an unstable bound orbit at the wormhole's throat. These causal geodesics are visualized by embedding plots in Euclidean space in cylindrical coordinates. For test scalar fields, we compute transmission coefficients and quasi-normal modes for arbitrary coupling of the field to the background geometry in the WKB approximation. We show that there always exists an unstable mode whenever the coupling constant is greater than 1/2. This analysis is interesting since recent computations of self-interactions of a static scalar field in wormhole space-times reveal some anomalous dependence on the coupling constant, principally, the existence of an infinite discrete set of poles. We show that this pathological behavior of the self-field is an artifact of computing the interaction for values of the coupling constant that do not lie in the domain of stability.

Peter Taylor

2014-04-29T23:59:59.000Z

260

Laboratory and pilot field-scale testing of surfactants for environmental restoration of chlorinated solvent DNAPLs  

SciTech Connect (OSTI)

This project is composed of two phases and has the objective of demonstrating surfactant-enhanced aquifer remediation (SEAR) as a practical remediation technology at DOE sites with ground water contaminated by dense, non-aqueous phase liquids (DNAPLs), in particular, chlorinated solvents. The first phase of this project, Laboratory and Pilot Field Scale Testing, which is the subject of the work so far, involves (1) laboratory experiments to examine the solubilization of multiple component DNAPLs, e.g., solvents such as perchloroethylene (PCE) and trichloroethylene (TCE), by dilute surfactant solutions, and (2) a field test to demonstrate SEAR technology on a small scale and in an existing well.

Jackson, R.E. [INTERA, Inc., Austin, TX (United States); Fountain, J.C. [State Univ. of New York, Buffalo, NY (United States)

1994-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

DETERMINATION OF THE AGR-1 CAPSULE TO FPMS SPECTROMETER TRANSPORT VOLUMES FROM LEADOUT FLOW TEST DATA  

SciTech Connect (OSTI)

The AGR-1 experiment is a fueled multiple-capsule irradiation experiment being conducted in the Advanced Test Reactor (ATR) in support of the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. A flow experiment conducted during the AGR-1 irradiation provided data that included the effect of flow rate changes on the decay of a short-lived radionuclide (23Ne). This data has been analyzed to determine the capsule-specific downstream transport volume through which the capsule effluents must pass before arrival at the fission product monitoring system spectrometers. These resultant transport volumes when coupled with capsule outlet flow rates determine the transport times from capsule-to-detector. In this work an analysis protocol is developed and applied in order to determine capsule-specific transport volumes to precisions of better than +/- 7%.

J. K. Hartwell; J. B. Walter; D. M. Scates; M. W. Drigert

2007-05-01T23:59:59.000Z

262

Laboratory and Modeling Evaluations in Support of Field Testing for Desiccation at the Hanford Site  

SciTech Connect (OSTI)

The Deep Vadose Zone Treatability Test Plan for the Hanford Central Plateau includes testing of the desiccation technology as a potential technology to be used in conjunction with surface infiltration control to limit the flux of technetium and other contaminants in the vadose zone to the groundwater. Laboratory and modeling efforts were conducted to investigate technical uncertainties related to the desiccation process and its impact on contaminant transport. This information is intended to support planning, operation, and interpretation of a field test for desiccation in the Hanford Central Plateau.

Truex, Michael J.; Oostrom, Martinus; Freedman, Vicky L.; Strickland, Christopher E.; Wietsma, Thomas W.; Tartakovsky, Guzel D.; Ward, Anderson L.

2011-02-23T23:59:59.000Z

263

FOCUS: HARSH ENVIRONMENT MASS SPECTROMETRY Field Testing of Lake Water Chemistry with a  

E-Print Network [OSTI]

FOCUS: HARSH ENVIRONMENT MASS SPECTROMETRY Field Testing of Lake Water Chemistry with a Portable waters. KOALA is a backpackable MS operated from above the water surface, in which samples are pumped for temperature control of a membrane inlet when steep thermal gradients are present in a water body, as well

Entekhabi, Dara

264

Application of Direct Tension Testing to Field Samples to Investigate the Effects of HMA Aging  

E-Print Network [OSTI]

binder testing. Findings show that oxidative aging has an impact on the stiffness and performance of HMA. Chip seal surface treatments can extend the life of the pavement, but their affects are found primarily at the surface. Two additional field sites...

Lawrence, James 1973-

2012-08-27T23:59:59.000Z

265

PLANT RESISTANCE Field and Storage Testing Bt Potatoes for Resistance to Potato  

E-Print Network [OSTI]

PLANT RESISTANCE Field and Storage Testing Bt Potatoes for Resistance to Potato Tuberworm Lansing, MI 48824 J. Econ. Entomol. 97(4): 1425Ð1431 (2004) ABSTRACT Potato tuberworm, Phthorimaea operculella (Zeller), is the most serious insect pest of potatoes worldwide. The introduction of the Bacillus

Douches, David S.

266

Lessons from two field tests on pipeline damage detection using acceleration measurement (Invited Paper)  

E-Print Network [OSTI]

Lessons from two field tests on pipeline damage detection using acceleration measurement (Invited, Irvine, CA USA 92697-2700 ABSTRACT Early detection of pipeline damages has been highlighted in water supply industry. Water pressure change in pipeline due to a sudden rupture causes pipe to vibrate

Shinozuka, Masanobu

267

Improving Permeability and Salt Leaching in Irrigated Sports Fields: Exploratory Testing  

E-Print Network [OSTI]

TR-310 2008 Improving Permeability and Salt Leaching in Irrigated Sports Fields: Exploratory Testing S. Miyamoto, Ignacio Martinez, Francisco Luna, and David Tirre Texas AgriLife Agricultural Research..., Ignacio Martinez, Francisco Luna, and David Tirre Texas A&M University Agricultural Research Center at El Paso El Paso City Parks and Recreation Department and El Paso Water Utilities TWRI Technical Report 310...

Miyamoto, S; Martinez, Ignacio; Luna, Francisco; Tirre, David

268

Standard test method for determining the superplastic properties of metallic sheet materials  

E-Print Network [OSTI]

1.1 This test method describes the procedure for determining the superplastic forming properties (SPF) of a metallic sheet material. It includes tests both for the basic SPF properties and also for derived SPF properties. The test for basic properties encompasses effects due to strain hardening or softening. 1.2 This test method covers sheet materials with thicknesses of at least 0.5 mm but not greater than 6 mm. It characterizes the material under a uni-axial tensile stress condition. Note 1Most industrial applications of superplastic forming involve a multi-axial stress condition in a sheet; however it is more convenient to characterize a material under a uni-axial tensile stress condition. Tests should be performed in different orientations to the rolling direction of the sheet to ascertain initial anisotropy. 1.3 This method has been used successfully between strain rates of 10-5 to 10-1 per second. 1.4 This method has been used successfully on Aluminum and Titanium alloys. The use of the method wi...

American Society for Testing and Materials. Philadelphia

2008-01-01T23:59:59.000Z

269

NETL: News Release - First-of-a-Kind Sequestration Field Test Begins in  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8, 2009 8, 2009 First-of-a-Kind Sequestration Field Test Begins in West Virginia DOE-Sponsored Test to Evaluate Carbon Storage in Unmineable Coal Seams Washington, D.C. - Injection of carbon dioxide (CO2) began today in a first-of-a-kind field trial of enhanced coalbed methane recovery with simultaneous CO2 sequestration in an unmineable coal seam. The ultimate goal of the U.S. Department of Energy-sponsored project is to help mitigate climate change by providing an effective and economic means to permanently store CO2 in unmineable coal seams. CONSOL Energy Inc., West Virginia University, and the National Energy Technology Laboratory (NETL) are collaborating in the $13 million field trial, located in Marshall County, W.Va. The site was chosen because of its accessibility, availability, and typical northern Appalachian topography and geology. The project is funded by DOE's Office of Fossil Energy and managed by NETL.

270

A Test Of The Transiel Method On The Travale Geothermal Field | Open Energy  

Open Energy Info (EERE)

Of The Transiel Method On The Travale Geothermal Field Of The Transiel Method On The Travale Geothermal Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: A Test Of The Transiel Method On The Travale Geothermal Field Details Activities (0) Areas (0) Regions (0) Abstract: An original electromagnetic method has been applied to geothermal prospecting on the Travale test site. The results show good correlations between observed polarization anomalies and productive zones. It is believed that these anomalies are related to reduction phenomena that occurred in the overburden (such as pyrite formation) caused by thermochemical exchanges between the reservoir and the overburden above those zones where the reservoir permeability is highest. Author(s): A. Duprat, M. Roudot, S. Spitz Published: Geothermics, 1985

271

Evaluation of immunoassay-based field test kits for the detection of petroleum fuel hydrocarbons in soil  

SciTech Connect (OSTI)

The objectives of this project are to identify, experimentally evaluate and implement the use of alternative field screening methods that are specific for environmental contaminants of interest and concern to the Department of Energy. Immunochemical techniques are rapidly becoming a significant component in the arsenal of field screening methods. Analytical results obtained by immunoassay have been shown to correlate well with those obtained by traditional laboratory methods. Also, the use of immunoassay-based field screening methods can significantly reduce the cost and time required for environmental assessment. The authors are currently evaluating the effectiveness of several immunoassay-based test kits for detecting petroleum fuel hydrocarbons in soil. Evaluations of two kits, one a semiquantitative assay and the other a quantitative assay, have been completed. The samples analyzed were either solvent or soil spiked with either a mixture of benzene, toluene, ethylbenzene and the three isomers of xylene (BTEX), or gasoline. The kits performed well and according to the manufacturers` claims. Of the 50 assays made with the semiquantitative test, the concentrations of 44 samples were correctly determined. The other six samples were determined to be false positives. A soil matrix effect was observed that could account for some of the false positive results. Experimental results using the quantitative test with BTEX (68 assays) correlated well with those expected; R{sup 2} of 0.976 to 0.983 with slopes of 0.94 to 0.97. With gasoline (38 assays) R{sup 2} values of 0.957 to 0.987 and slopes of 0.76 to 0.78 were obtained. The lower slopes with gasoline are indicative of the lower immunoreactivity of that particular sample of gasoline relative to BTEX.

Waters, L.C.; Palausky, M.A.; Counts, R.W.; Jenkins, R.A.

1995-04-01T23:59:59.000Z

272

Propagation of Test Particles and Scalar Fields on a Class of Wormhole Space-Times  

E-Print Network [OSTI]

In this paper, we consider the problem of test particles and test scalar fields propagating on the background of a class of wormhole space-times. For test particles, we solve for arbitrary causal geodesics in terms of integrals which are solved numerically. These integrals are parametrized by the radius and shape of the wormhole throat as well as the initial conditions of the geodesic trajectory. In terms of these parameters, we compute the conditions for the geodesic to traverse the wormhole, to be reflected by the wormhole's potential or to be captured on an unstable bound orbit at the wormhole's throat. These causal geodesics are visualized by embedding plots in Euclidean space in cylindrical coordinates. For test scalar fields, we compute transmission coefficients and quasi-normal modes for arbitrary coupling of the field to the background geometry in the WKB approximation. We show that there always exists an unstable mode whenever the coupling constant is greater than 1/2. This analysis is interesting si...

Taylor, Peter

2014-01-01T23:59:59.000Z

273

Determination of the 85 Rb ng-series quantum defect by electric-field-induced resonant energy  

E-Print Network [OSTI]

Determination of the 85 Rb ng-series quantum defect by electric-field-induced resonant energy of an electric field 1 . The resonant energy transfer process between Rydberg atoms is driven by the electric-series of potassium. The range of electric fields or "width" over which signifi- cant resonant energy transfer can

Le Roy, Robert J.

274

Remote control of an agricultural tractor in SAE field upset tests  

Science Journals Connector (OSTI)

Research by the National Institute for Occupational Safety and Health (NIOSH), Division of Safety Research in Morgantown, West Virginia is addressing the problem of injuries due to agricultural tractor rollovers, and improvements to rollover protective structures (ROPS). As part of this research, the NIOSH, Pittsburgh Research Laboratory modified a Ford model 4600 agricultural tractor for remote control operation, and used this tractor to conduct SAE field upset tests. Modifications to the tractor involved installing a protective framework, electrical actuators for fuel, brake, clutch, and steering controls, and a radio link for remote operation. The tractor has been used to complete over 30 total side and back upset tests, with no failures of the remote control system. These tests have allowed NIOSH researchers to study the performance of currently available ROPS, use this information for the development of improved ROPS designs, and test a NIOSH-developed prototype automatically deploying ROPS.

T.J. Lutz; G.T. Homce

2004-01-01T23:59:59.000Z

275

U.S. Department of Energy, Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION'  

Broader source: Energy.gov (indexed) [DOE]

Carlsbad Field Office Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION' Description of Proposed Action Removal of one Standard Waste Box and one drum oflow-Ievel waste resulting from remediation of a leaking cesium source used in WIPP operations for off-site treatment and disposal at a private facility authorized to accept that waste. Number and Title of Applicable Categorical Exclusion B6.1 - Small-scale, short-term cleanup actions under RCRA, Atomic Energy Act, or other authorities Regulatory Requirements in 10 CFR 1021.41 O(b): (See full text in regulation) (I) The proposed action fits within a class of actions that is listed in Appendix A or B to Subpart D For classes of actions listed in Appendix B, the following conditions are integral elements: Le., to

276

Spatial coherence effect on layer thickness determination in narrowband full-field optical coherence tomography  

SciTech Connect (OSTI)

Longitudinal spatial coherence (LSC) is determined by the spatial frequency content of an optical beam. The use of lenses with a high numerical aperture (NA) in full-field optical coherence tomography and a narrowband light source makes the LSC length much shorter than the temporal coherence length, hence suggesting that high-resolution 3D images of biological and multilayered samples can be obtained based on the low LSC. A simplified model is derived, supported by experimental results, which describes the expected interference output signal of multilayered samples when high-NA lenses are used together with a narrowband light source. An expression for the correction factor for the layer thickness determination is found valid for high-NA objectives. Additionally, the method was applied to a strongly scattering layer, demonstrating the potential of this method for high-resolution imaging of scattering media.

Safrani, Avner; Abdulhalim, Ibrahim

2011-06-20T23:59:59.000Z

277

Physics modeling of tandem mirror devices with high-field test cell inserts  

SciTech Connect (OSTI)

Recently developed plasma physics models of tandem mirror operation with a high-field technology test cell insert in the central cell are described in detail. These models have been incorporated in the TMRBAR tandem mirror reactor physics code. Results of a benchmark case for the code models against previous analysis of the MFTF - ..cap alpha.. /sup +/ T configuration are given. A brief users guide to the new TMRBAR with the test cell models is also presented. Some description of the applications of the models to MFTF - ..cap alpha.. /sup +/ T and FPD - II + T configurations is made. References are given to separate reports on these studies.

Fenstermacher, M.E.; Campbell, R.B.

1985-04-15T23:59:59.000Z

278

9977 TYPE B PACKAGING INTERNAL DATA COLLECTION FEASIBILITY TESTING - MAGNETIC FIELD COMMUNICATIONS  

SciTech Connect (OSTI)

The objective of this report is to document the findings from proof-of-concept testing performed by the Savannah River National Laboratory (SRNL) R&D Engineering and Visible Assets, Inc. for the DOE Packaging Certification Program (PCP) to determine if RuBee (IEEE 1902.1) tags and readers could be used to provide a communication link from within a drum-style DOE certified Type B radioactive materials packaging. A Model 9977 Type B Packaging was used to test the read/write capability and range performance of a RuBee tag and reader. Testing was performed with the RuBee tags placed in various locations inside the packaging including inside the drum on the outside of the lid of the containment vessel and also inside of the containment vessel. This report documents the test methods and results. A path forward will also be recommended.

Shull, D.

2012-06-18T23:59:59.000Z

279

Determining the exchange parameters of spin-1 metal-organic molecular magnets in pulsed magnetic fields  

SciTech Connect (OSTI)

We nave measured the high-field magnetization of a number of Ni-based metal-organic molecular magnets. These materials are self-assembly coordination polymers formed from transition metal ions and organic ligands. The chemistry of the compounds is versatile allowing many structures with different magnetic properties to be formed. These studies follow on from previous measurements of the Cu-based analogues in which we showed it was possible to extract the exchange parameters of low-dimensional magnets using pulsed magnetic fields. In our recent experiments we have investigated the compound (Ni(HF{sub 2})(pyz){sub 2})PF{sub 6}, where pyz = pyrazine, and the Ni-ions are linked in a quasi-two-dimensional (Q2D) square lattice via the pyrazine molecules, with the layers held together by HF{sub 2} ligands. We also investigated Ni(NCS){sub 2}(pyzdo){sub 2}, where pyzdo = pyrazine dioxide. The samples are grown at Eastern Washington University using techniques described elsewhere. Measurements are performed at the pulsed magnetic field laboratory in Los Alamos. The magnetization of powdered samples is determined using a compensated coil magnetometer in a 65 T short pulse magnet. Temperatures as low as 500 mK are achievable using a {sup 3}He cryostat. The main figure shows the magnetization of the spin-1 [Ni(HF{sub 2})(pyz){sub 2}]PF{sub 6} compound at 1.43 K. The magnetization rises slowly at first, achieving a rounded saturation whose midpoint is around 19 T. A small anomaly is also seen in the susceptibility at low fields ({approx}3 T), which might be attributed to a spin-flop transition. In contrast, the spin-1/2 [Cu(HF{sub 2})(pyz){sub 2}]PF{sub 6} measured previously has a saturation magnetization of 35.5 T and a strongly concave form of M(B) below this field. This latter compound was shown to be a good example of a Q2D Heisenberg antiferromagnet with the strong exchange coupling (J{sub 2D} = 12.4 K, J{sub {perpendicular}}/J{sub 2D} {approx} 10{sup -2}) directed along the Cu-pyz-Cu directions. The structure of the two compounds is similar, but in the case of the Cu-compound the Cu-Cu pathways are linear, whereas in the Ni-compound they are kinked. The pulsed-field data combined with information from temperature-dependent susceptibility, muon-spin rotation, electron-spin resonance and ligand-field calculations suggest that, far from being magnetically Q2D, the Ni-compound is fairly one-dimensional with the dominant exchange (J{sub 1D} = 3.1 K and J{sub {perpendicular}}/J{sub 1D} = 0.63) directed along the Ni-FHF-Ni direction. Ni(NCS){sub 2}(pyzdo){sub 2} was also investigated. Previous ultra-high field measurements using the 100 T magnet have shown that this compound has a saturation field close to 80 T. The purpose of the present studies is to map out the phase diagram of this material at mid-range fields. The data are shown in the inset to the figure. This continuing project probes the ability of organic ligands to mediate magnetic exchange, the link between structure, dimensionality and bulk magnetic properties, as well as the role of spin number in quantum magnets. Ultimately the investigations aim to determine to what extent it is possible to produce self-assembly molecular materials with tailor-made magnetic characteristics.

Mcdonald, Ross D [Los Alamos National Laboratory; Singleton, John [Los Alamos National Laboratory; Lancaster, Tom [OXFORD UNIV.; Goddard, Paul [OXFORD UNIV.; Manson, Jamie [EASTERN WASHINGTON UNIV.

2011-01-14T23:59:59.000Z

280

L&E: Participate in a field test for high-efficiency troffer lighting. |  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lighting & Electrical » Participate Lighting & Electrical » Participate in a field test for high efficiency troffer lighting Activities Technology Solutions Teams Lighting & Electrical Space Conditioning Plug & Process Loads Food Service Refrigeration Laboratories Energy Management & Information Systems Public Sector Teams Market Solutions Teams Participate in a field test for high-efficiency troffer lighting 50% of all commercial fluorescent lighting fixtures are recessed troffers in 1'x4', 2'x2' and 2'x4' configurations, in operation for more than 10 hours a day on average and collectively consuming more than 87 TWh of electricity annually. The Lighting & Electrical team supported the market introduction of high-efficiency troffers by developing a specification that allows for

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Field Testing of Activated Carbon Injection Options for Mercury Control at TXU's Big Brown Station  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Field TesTing oF AcTivATed cArbon Field TesTing oF AcTivATed cArbon injecTion opTions For Mercury conTrol AT TXu's big brown sTATion Background The 2005 Clean Air Mercury Rule will require significant reductions in mercury emissions from coal-fired power plants. Lignite coal is unique because of its highly variable ash content (rich in alkali and alkaline-earth elements), high moisture levels, low chlorine content, and high calcium content. Unique to Texas lignite coals are relatively high iron and selenium concentrations. When combusting Texas lignite coals, up to 80 percent of the mercury in the flue gas is present as elemental mercury, which is not readily captured by downstream pollution control devices. To better understand the factors that influence mercury control at units firing

282

Laboratory and field testing of an aerosol-based duct-sealing technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Laboratory and field testing of an aerosol-based duct-sealing technology Laboratory and field testing of an aerosol-based duct-sealing technology for large commercial buildings. Title Laboratory and field testing of an aerosol-based duct-sealing technology for large commercial buildings. Publication Type Journal Article LBNL Report Number LBNL-44220 Year of Publication 2002 Authors Carrié, François Rémi, Ronnen M. Levinson, Tengfang T. Xu, Darryl J. Dickerhoff, William J. Fisk, Jennifer A. McWilliams, Mark P. Modera, and Duo Wang Journal ASHRAE Transactions Start Page Chapter Date Published January 2002 Abstract Laboratory and field experiments were performed to evaluate the feasibility of sealing leaks in commercial duct systems with an aerosol sealant. The method involves blowing an aerosol through the duct system to seal the leaks from the inside, the principle being that the aerosol particles deposit in the cracks as they try to escape under pressure. It was shown that the seals created with the current sealant material can withstand pressures far in excess of what is found in commercial-building duct systems. We also performed two field experiments in two large-commercial buildings. The ASHRAE leakage classes of the systems were reduced from 653 down to 103, and from 40 down to 3. Methods and devices specifically devised for this application proved to be very efficient at (a) increasing the sealing rate and (b) attaining state-of-the-art duct leakage classes. Additional research is needed to improve the aerosol injection and delivery processes.

283

Field test of a high efficiency, automatic defrost refrigerator-freezer  

SciTech Connect (OSTI)

This paper describes the market evaluation and field test portion of a program to design, develop, and demonstrate a high efficiency, automatic defrosting refrigerator-freezer for the residential market. After the successful completion of Phase I of the program, which concentrated on the design, construction, and laboratory testing of a 453 1 (16 ft/sup 3/) high-efficiency refrigerator-freezer prototype, Phase II was initiated in February 1979 to evaluate the sales potential and performance of the high-efficiency refrigerator concept under field conditions, as a necessary step in creating a product that was both manufacturable and marketable. In Phase I, a survey of food consumption and storage trends, family size, and consumer buying habits led to a sales-weighted average-capacity forecast for 1985 of approximately 453 1 (16 ft/sup 3/) and identification of the top-mount, automatic defrosting refrigerator as the projected sales leader. To meet this market demand, a 453 1 (16 ft/sup 3/) top-mount was selected as the baseline for the Phase I design and development. In Phase II, a 509 1 (18 ft/sup 3/) unit using Phase I technology was chosen for the field test, since the slightly larger model better fit the participating manufacturer's new product development efforts and market.

Topping, R.F.; Vineyard, E.A.

1982-01-01T23:59:59.000Z

284

Evidence of Multi-Process Matrix Diffusion in a Single Fracturefrom a Field Tracer Test  

SciTech Connect (OSTI)

Compared to values inferred from laboratory tests on matrix cores, many field tracer tests in fractured rock have shown enhanced matrix diffusion coefficient values (obtained using a single-process matrix-diffusion model with a homogeneous matrix diffusion coefficient). To investigate this phenomenon, a conceptual model of multi-process matrix diffusion in a single-fracture system was developed. In this model, three matrix diffusion processes of different diffusion rates were assumed to coexist: (1) diffusion into stagnant water and infilling materials within fractures, (2) diffusion into a degraded matrix zone, and (3) further diffusion into an intact matrix zone. The validity of the conceptual model was then demonstrated by analyzing a unique tracer test conducted using a long-time constant-concentration injection. The tracer-test analysis was conducted using a numerical model capable of tracking the multiple matrix-diffusion processes. The analysis showed that in the degraded zone, a diffusion process with an enhanced diffusion rate controlled the steep rising limb and decay-like falling limb in the observed breakthrough curve, whereas in the intact matrix zone, a process involving a lower diffusion rate affected the long-term middle platform of slowly increasing tracer concentration. The different matrix-diffusion-coefficient values revealed from the field tracer test are consistent with the variability of matrix diffusion coefficient measured for rock cores with different degrees of fracture coating at the same site. By comparing to the matrix diffusion coefficient calibrated using single-process matrix diffusion, we demonstrated that this multi-process matrix diffusion may contribute to the enhanced matrix-diffusion-coefficient values for single-fracture systems at the field scale.

Zhou, Quanlin; Liu, Hui-Hai; Bodvarsson, Gudmundur; Molz, Fred J.

2005-06-11T23:59:59.000Z

285

NETL: News Release - DOE-Funded Acoustic Monitor Passes Key Field Test  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

March 7, 2005 March 7, 2005 DOE-Funded Acoustic Monitor Passes Key Field Test Detection System Can Help Locate Pipeline Leaks, Damage MORGANTOWN, WV - A new, lightweight device that uses natural gas itself to detect leaks in natural gas pipelines has been successfully tested on a transmission main owned and operated by Dominion Transmission Inc., in Morgantown, W.Va. The test was conducted by the U.S. Department of Energy's National Energy Technology Laboratory (NETL) and West Virginia University, which has worked with NETL for the past 2 years to advance the detection system. The device is one of a suite of technologies being developed by the Energy Department's Office of Fossil Energy to effectively and efficiently monitor the 1.3 million miles of transmission and distribution pipelines which crisscross the United States

286

Field operations plan for permeability testing in the WIPP-site underground facility  

SciTech Connect (OSTI)

This Field Operations Plan (FOP) describes the objectives, design, equipment, and methodology for permeability tests to be conducted in boreholes drilled from the underground facility currently under construction at the 655-meter depth level at the Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico into relatively undisturbed portions of the Salado formation. The WIPP is a U. S. Department of Energy research and development facility designed to demonstrate safe disposal of transuranic radioactive wastes resulting from the United States`s defense programs. The testing described in this FOP will be conducted by INTERA Technologies, Inc., under contract to the Earth Sciences Division of Sandia National Laboratories (SNL). The testing program is part of the WIPP-site Hydrogeologic Characterization and Plugging and Sealing programs being conducted by SNL`s Earth Sciences and Experimental Programs Divisions, respectively.

Saulnier, G.J. Jr. [Intera Technologies, Inc., Austin, TX (United States)

1988-08-09T23:59:59.000Z

287

Field operations plan for permeability testing in the WIPP-site underground facility  

SciTech Connect (OSTI)

This Field Operations Plan (FOP) describes the objectives, design, equipment, and methodology for permeability tests to be conducted in boreholes drilled from the underground facility currently under construction at the 655-meter depth level at the Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico into relatively undisturbed portions of the Salado formation. The WIPP is a U. S. Department of Energy research and development facility designed to demonstrate safe disposal of transuranic radioactive wastes resulting from the United States's defense programs. The testing described in this FOP will be conducted by INTERA Technologies, Inc., under contract to the Earth Sciences Division of Sandia National Laboratories (SNL). The testing program is part of the WIPP-site Hydrogeologic Characterization and Plugging and Sealing programs being conducted by SNL's Earth Sciences and Experimental Programs Divisions, respectively.

Saulnier, G.J. Jr. (Intera Technologies, Inc., Austin, TX (United States))

1988-08-09T23:59:59.000Z

288

Determination of High-Frequency Current Distribution Using EMTP-Based Transmission Line Models with Resulting Radiated Electromagnetic Fields  

SciTech Connect (OSTI)

Application of BPL technologies to existing overhead high-voltage power lines would benefit greatly from improved simulation tools capable of predicting performance - such as the electromagnetic fields radiated from such lines. Existing EMTP-based frequency-dependent line models are attractive since their parameters are derived from physical design dimensions which are easily obtained. However, to calculate the radiated electromagnetic fields, detailed current distributions need to be determined. This paper presents a method of using EMTP line models to determine the current distribution on the lines, as well as a technique for using these current distributions to determine the radiated electromagnetic fields.

Mork, B; Nelson, R; Kirkendall, B; Stenvig, N

2009-11-30T23:59:59.000Z

289

Effect of fractures on reserve calculations as determined by petrology: Birthright field, Hopkins County, Texas  

SciTech Connect (OSTI)

Birthright field in Hopkins County, Texas, produces oil and gas from Jurassic carbonate grainstone deposits of the upper Smackover Formation. The field was discovered in 1965 by the drilling of the Schneider and Corey 1 E.M. Strode well. This well initially tested 491 BOPD from a 34-ft interval at 9,519 ft. The field has an oil-water contact at subsea 9,090 ft and a gas-oil contact at subsea 8,980 ft. Ten wells were originally drilled in the 800-ac field, but only six oil and one gas wells were put on production. The estimated in-place reserves in 1969 were 6.4 million bbl oil, 1.3 million bbl condensate, and 14.97 bcf gas, with an estimated primary recovery of 22%. The total cumulative oil production to 1986 was 3.19 million bbl oil. The grainstones of the producing interval are composed of ooids, pisoids, pelecypod fragments, grapestones, and fecal pellets. This shallow marine bar deposit has been extensively leached and cemented. Fracturing and brecciation have taken place causing many grains to be broken and sheared. Many grains have been coated by early diagenetic fibrous rim cement indicative of leaching in vadose and phreatic conditions. These conditions have caused significant variations in the structural conditions and sizes of the coated grains. Anhydrite and sparry calcite have subsequently filled many of the pores, especially below the oil-water contact. It is though that these factors may have affected actual recoverable reserves, and that petrology can be an effective tool in reservoir evaluation, especially where recovered reserves are greater than had been initially calculated.

Mitchell-Tapping, H.J. (GeoResearch International, Dallas, TX (USA))

1989-09-01T23:59:59.000Z

290

Testing Magnetic Field Models for the Class 0 Protostar L1527  

E-Print Network [OSTI]

For the Class 0 protostar, L1527, we compare 131 polarization vectors from SCUPOL/JCMT, SHARP/CSO and TADPOL/CARMA observations with the corresponding model polarization vectors of four ideal-MHD, non-turbulent, cloud core collapse models. These four models differ by their initial magnetic fields before collapse; two initially have aligned fields (strong and weak) and two initially have orthogonal fields (strong and weak) with respect to the rotation axis of the L1527 core. Only the initial weak orthogonal field model produces the observed circumstellar disk within L1527. This is a characteristic of nearly all ideal-MHD, non-turbulent, core collapse models. In this paper we test whether this weak orthogonal model also has the best agreement between its magnetic field structure and that inferred from the polarimetry observations of L1527. We found that this is not the case; based on the polarimetry observations the most favored model of the four is the weak aligned model. However, this model does not produce a...

Davidson, J A; Hull, C L H; Plambeck, R L; Kwon, W; Crutcher, R M; Looney, L W; Novak, G; Chapman, N L; Matthews, B C; Stephens, I W; Tobin, J J; Jones, T J

2014-01-01T23:59:59.000Z

291

Numerical inverse method predicting acoustic spinning modes radiated by a ducted fan from free-field test dataa)  

Science Journals Connector (OSTI)

Spinning modes generated by a ducted turbofan at a given frequency determine the acoustic free-field directivity. An inverse method starting from measured directivity patterns is interesting in providing information on the noise sources without requiring tedious spinning-mode experimental analyses. According to a previous article equations are based on analytical modal splitting inside a cylindrical duct and on a Rayleigh or a Kirchhoff integral on the duct exit cross section to get far-field directivity. Equations are equal in number to free-field measurement locations and the unknowns are the propagating mode amplitudes (there are generally more unknowns than equations). A MATLAB procedure has been implemented by using either the pseudoinverse function or the backslash operator. A constraint comes from the fact that squared modal amplitudes must be positive which involves an iterative least squares fitting. Numerical simulations are discussed along with several examples based on tests performed by RollsRoyce in the framework of a European project. It is assessed that computation is very fast and it well fits the measured directivities but the solution depends on the method and is not unique. This means that the initial set of modes should be chosen according to any known physical property of the acoustic sources.

Serge Lewy

2008-01-01T23:59:59.000Z

292

Testing the attitude determination and control of a CubeSat with hardware-in-the-loop  

E-Print Network [OSTI]

This thesis presents a methodology for testing the attitude determination and control of a CubeSat within a constrained environment. This approach first evaluates the concept of operations of the satellite mission, then ...

Quadrino, Meghan Kathleen

2014-01-01T23:59:59.000Z

293

A flight test system for the determination of the stability and control derivatives of a general aviation aircraft  

E-Print Network [OSTI]

and flight modes. Maneuvers were performed that would yield the most useful data for determining stability and control derivatives. Flight tests were performed for various airspeeds, altitudes, and aircraft configurations. Takeoff, landing, cruise and engine...

Oehl, David Christopher

1995-01-01T23:59:59.000Z

294

TUNA FISH (T-30) A new proficiency testing material for the determination of As and Hg in seafood  

Science Journals Connector (OSTI)

The quality of the aquatic and marine environment can be monitored by the determination of pollutants in organisms living in this environment. Certified reference materials and well-organised proficiency tests ar...

B. Gawlik; Martine Druges; Michele Bianchi

1997-06-01T23:59:59.000Z

295

Design and field test of collaborative tools in the service of an innovative organization  

SciTech Connect (OSTI)

This paper presents the design process of collaborative tools, based on ICT, aiming at supporting the tasks of the team that manages an outage of an energy production plant for maintenance activities. The design process follows an iterative and multidisciplinary approach, based on a collective tasks modeling of the outage management team in the light of Socio Organizational and Human (SOH) field studies, and on the state of the art of ICT. Field test of the collaborative tools designed plays a great place in this approach, allowing taking into account the operational world but involves also some risks which must be managed. To implement tools on all the production plants, we build an 'operational concept' with a level of description which authorizes the evolution of tools and allows some local adaptations. The field tests provide lessons on the ICT topics. For examples: the status of the remote access tools, the potential of use of a given information input by an actor for several individual and collective purposes, the actors perception of the tools meaning, and the requirements for supporting the implementation of change. (authors)

De Beler, N.; Parfouru, S. [EdF R and D -Industrial Risk Management Dept., Human Factors Group, 1, avenue du General de Gaulle, 92 141 Clamart Cedex (France)

2012-07-01T23:59:59.000Z

296

Test plan for preparing the Rapid Transuranic Monitoring Laboratory for field deployment  

SciTech Connect (OSTI)

This plan describes experimental work that will be performed during fiscal year 1994 to prepare the Rapid Transuranic Monitoring Laboratory (RTML) for routine field use by US Department of Energy (DOE) Environmental Restoration and Waste Management programs. The RTML is a mobile, field-deployable laboratory developed at the Idaho National Engineering Laboratory (INEL) that provides a rapid, cost-effective means of characterizing and monitoring radioactive waste remediation sites for low-level radioactive contaminants. Analytical instruments currently installed in the RTML include an extended-range, germanium photon analysis spectrometer with an automatic sample changer; two, large-area, ionization chamber alpha spectrometers; and four alpha continuous air monitors. The RTML was field tested at the INEL during June 1993 in conjunction with the Buried Waste Integrated Demonstration`s remote retrieval demonstration. The major tasks described in this test plan are to (a) evaluate the beta detectors for use in screening soil samples for {sup 90}Sr, (b) upgrade the alpha spectral analysis software programs, and (c) upgrade the photon spectral analysis software programs.

McIsaac, C.V.; Sill, C.W.; Gehrke, R.J.; Killian, E.W.; Watts, K.D.

1994-04-01T23:59:59.000Z

297

Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Agency -  

Broader source: Energy.gov (indexed) [DOE]

Department of Energy Department of Energy Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Agency - Energy Project Title: (0207-1609) Planar Energy - Solid-State All Inorganic Rechargeable Lithium Batteries Location: Florida Proposed Action or Project Description: American Recover), and Reinvestment Act: ~ Funding will support laboratory, bench scale, and pilot scale research and development on lithium battery manufacturing processes for use in electrical energy storage for transportation. Categorical Exclusion(s) Applied: x ~ 83.6 Sitinglconstruct1onJoperationldecommlssloning of facilities for bench-scale research, conventional laboratory operations, smalJ..scale research and development and pilot projects *-For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, see Subpart D of to CFRIO 21 £::lli:klkrc

298

Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Agency -  

Broader source: Energy.gov (indexed) [DOE]

nt of n y nt of n y Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Agency - Energy Project Title: (0471-1508) NAVITASMAX - Novel Tuning of Critical Fluctuations for Advanced Thermal Energy Storage Location: *- Multiple States - Arizona, Massachusetts, New York, Colorado Proposed Action or Project Description: American Recovery and Reinvestment Act: D Funding will support a proof-of-concept project that evaluates and optimizes simple and complex supercritical fluids for use as novel heat storage, transfer, and working fluids in solar and nuclear applications. Proposed work consists of indoor laboratory-based research and development (R&D), modeling, and analysis, including (1) developing theoretical models to explore inhomogeneities and heat capacity anomalies in supercritical fluids, and prove potential to increase heat capacity over ranges of

299

Requirements for the Effective Use of the Water Resources Scientific Information Center (WRSIC) -- Determined by Field Evaluation  

E-Print Network [OSTI]

TR- 23 Vol II 1969 Requirements for Effective Use of the Water Resources Scientific Information Center (WRSIC) ? Determined by Field Evaluation E.B. Smith J.B. Herbich J.D. Benson Texas...TR- 23 Vol II 1969 Requirements for Effective Use of the Water Resources Scientific Information Center (WRSIC) ? Determined by Field Evaluation E.B. Smith J.B. Herbich J.D. Benson Texas...

Herbich, J. B.; Smith, E. B.; Benson, J. D.

1969-11-15T23:59:59.000Z

300

Determination of formation permeability using back-pressure test data from hydraulically-fractured, low-permeability gas wells  

E-Print Network [OSTI]

DETERMINATION OF FORMATION PERMEABILITY USING BACX-PRESSURE TEST DATA FROM HYDRAULICALLY-FRACTURED, LOW-PERMEABILITY GAS WELLS A Thesis JOHN PAUL KRAWTZ Submitted to the Graduate College of Texas AsJ4 University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE August 1984 Major subject: petroleum Engineering DETERMINATION OF FORMATION PERMEABILITY USING BACK-PRESSURE TEST DATA FROM HYDRAULICALLY-FRACTURED, LOW-PERMEABILITY GAS WELLS A Thesis JOHN PAUL KRAWTZ...

Krawtz, John Paul

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Field studies of the potential for wind transport of plutonium- contaminated soils at sites in Areas 6 and 11, Nevada Test Site  

SciTech Connect (OSTI)

This report describes and documents a series of field experiments carried out in Areas 6 and 11 of the Nevada Test Site in June and July 1994 to determine parameters of boundary layer winds, surface characteristics, and vegetation cover that can be used to predict dust emissions from the affected sites. Aerodynamic roughness of natural sites is determined largely by the lateral cover of the larger and more permanent roughness elements (shrubs). These provide a complete protection of the surface from wind erosion. Studies using a field-portable wind tunnel demonstrated that natural surfaces in the investigated areas of the Nevada Test Site are stable except at very high wind speeds (probably higher than normally occur, except perhaps in dust devils). However, disturbance of silty-clay surfaces by excavation devices and vehicles reduces the entrainment threshold by approximately 50% and makes these areas potentially very susceptible to wind erosion and transport of sediments.

Lancaster, N.; Bamford, R.; Metzger, S. [University and Community Coll. System of Nevada, Reno, NV (United States). Quaternary Sciences Center, Desert Research Institute

1995-07-01T23:59:59.000Z

302

Design of field test plots for a sloped waste rock surface  

SciTech Connect (OSTI)

Westmin Resources Limited is a Western Canadian mining company with producing interests in base and precious metals and coals. Westmin`s Myra Falls Operations produce copper, zinc, and gold concentrates. The Myra Falls Operations are located in the central interior of Vancouver Island in a hanging glacial valley. Mean annual precipitation is approximately 3,000 mm with more than 75% occurring during the months of October to April. Historic surface deposition of waste rock has resulted in acid rock drainage (ARD). An applied research program was initiated to develop a cover system for the waste rock material at the Myra Falls site. The objective is to develop a cover system which controls the ingress of oxygen and infiltration of water, while providing a medium for sustainable vegetation that is consistent with the end land use of the area. Progress to date suggests that modified local till materials (amended with either fly ash or bentonite) can be used in soil cover construction. Four test plots were designed using two-dimensional saturated-unsaturated modelling tools to ensure that the performance of each test plot was representative of a full scale ARD cover system. This paper summarizes the design philosophy and principles of the cover system as well as the methodology for the two-dimensional numerical modelling program. Conclusions and results from the numerical modelling program are presented with a focus on implications for construction of the field test plots and installation of the performance monitoring instruments. The numerical modelling demonstrated that the hydraulic performance of a soil cover system placed on a sloped waste rock surface will be much different than that predicted by idealized one-dimensional numerical models, and in general current design methodologies. The modelling clearly demonstrated that the design of small scale field test plots was not a simple task. The physical dimensions of the field test plots had a significant impact on the ideal location for monitoring instruments and incorrect placement of instruments would lead to an erroneous measure of test plot performance.

O`Kane, M. [O`Kane Consultants, Inc., Saskatoon, Saskatchewan (Canada); Stoicescu, J.; Haug, M. [M.D. Haug and Associates Ltd., Saskatoon, Saskatchewan (Canada); Januszewski, S. [Westmin Resources Ltd., Campbell River, British Columbia (Canada). Myra Falls Operations; Mchaina, D.M. [Westmin Resources Ltd., Vancouver, British Columbia (Canada)

1998-12-31T23:59:59.000Z

303

Coronal magnetic field and the plasma beta determined from radio and multiple satellite observations  

E-Print Network [OSTI]

We derived the coronal magnetic field, plasma density, and temperature from the observation of polarization and intensity of radio thermal free-free emission using the Nobeyama Radioheliograph (NoRH) and extreme ultraviolet (EUV) observations. We observed a post-flare loop on the west limb 11 April 2013. The line-of-sight magnetic field was derived from the circularly polarized free-free emission observed by NoRH. The emission measure and temperature were derived from the Atmospheric Imaging Assembly (AIA) onboard Solar Dynamics Observatory (SDO). The derived temperature was used to estimate the emission measure from the NoRH radio free-free emission observations. The derived density from NoRH was larger than that determined using AIA, which can be explained by the fact that the low temperature plasma is not within the temperature coverage of the AIA filters used in this study. We also discuss the other observation of the post-flare loops by the EUV Imager onboard the Solar Terrestrial Relations Observatory (...

Iwai, Kazumasa; Nozawa, Satoshi; Takahashi, Takuya; Sawada, Shinpei; Kitagawa, Jun; Miyawaki, Shun; Kashiwagi, Hirotaka

2014-01-01T23:59:59.000Z

304

Determination of soil properties for sandy soils and road base at Riverside Campus using laboratory testing and numerical simulation  

E-Print Network [OSTI]

test (DST) in a small box of 62-mm diameter in accordance with the designation ASTM D-3080 (Standard Method for Direct Shear Test Under Consolidated Drained Condition). The tested sands presented high shear resistance, even for the loosest state, 4... tests consisted on in-situ density determination using the sand cone method according to the designation ASTM D 1556 (Standard Test Method for Density and Unit Weight of Soils in Place by Sand-Cone Method), in-place water content, and soil modulus...

Saez Barrios, Deeyvid O.

2010-07-14T23:59:59.000Z

305

ANL/APS/TB-32 Test of Horizontal Field Measurements Using Two-Axis Hall  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 2 Test of Horizontal Field Measurements Using Two-Axis Hall Probes at the APS Magnetic Measurement Facility I. Vasserman Advanced Photon Source Argonne National Laboratory Argonne, IL 60439 1. Introduction The free-electron laser (FEL) project at the Advanced Photon Source (APS) will use a 400-MeV particle beam from the APS linac with RMS beam transverse size of 100 µm and requires very high performance of the insertion devices in order to achieve high intensity radiation. Averaged over period, the trajectory must deviate from the ideal on-axis trajectory by not more than 10% of the RMS beam size. Meaning that the second field integral should be straight within ±1300 G-cm 2 over the length of the device for both horizontal and vertical directions for the 400-MeV particle

306

Evolution of a mass-less test scalar field on Boson Stars space-times  

E-Print Network [OSTI]

We numerically solve the mass-less test scalar field equation on the space-time background of boson stars and black holes. In order to do so, we use a numerical domain that contains future null infinity. We achieve this construction using a scri-fixing conformal compactification technique based on hyperboloidal constant mean curvature foliations of the space-time and solve the conformally invariant wave equation. We present two results: the scalar field shows oscillations of the quasi- normal-mode type found for black holes only for boson star configurations that are compact, and no signs of tail decay is found in the parameter space we explored. Even though our results do not correspond to the master equation of perturbations of boson star solutions, they indicate that the parameter space of boson stars as black hole mimickers is restricted to compact configurations.

F. D. Lora-Clavijo; A. Cruz-Osorio; F. S. Guzmn

2010-07-07T23:59:59.000Z

307

Determination of stress state in deep subsea formation by combination of hydraulic fracturing in situ test and core  

E-Print Network [OSTI]

Determination of stress state in deep subsea formation by combination of hydraulic fracturing January 2013. [1] In situ test of hydraulic fracturing (HF) provides the only way to observe in situ of stress state in deep subsea formation by combination of hydraulic fracturing in situ test and core

308

Automated Critical Peak Pricing Field Tests: 2006 Program Description and Results APPENDICES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Automated Critical Peak Pricing Field Tests: 2006 Program Description and Results APPENDICES Mary Ann Piette David Watson Naoya Motegi Sila Kiliccote Lawrence Berkeley National Laboratory MS90R3111 1 Cyclotron Road Berkeley, California 94720 August 30, 2007 This work described in this report was coordinated by the Demand Response Research Center and funded by the California Energy Commission, Public Interest Energy Research Program, under Work for Others Contract No. 150-99-003, Am #1 and by the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. LBNL Report Number 62218 2 Table of Contents List of Tables ......................................................................................................................................3

309

An evaluation of new asphaltene inhibitors: Laboratory study and field testing  

SciTech Connect (OSTI)

Three candidate asphaltene inhibitors have been laboratory tested for their effectiveness on a canadian crude. One inhibitor, an oil-soluble polymeric dispersant developed by Shell Chemicals, showed superior behavior compared with the others; flocculation titrations with n-heptane resulted in an optimum concentration of 1,300 ppm. PVT calculations, however, indicated that the prevailing conditions downhole can be quite favorable with respect to the amount of effective inhibitor compared with the atmospheric laboratory titrations, which appear to be quite sever tests. Therefore, lower initial concentrations were recommended for a field trial. The chemical could be injected continuously through a capillary string, thereby avoiding the lost oil production associated with solvent-cleaning operations. It have proved to be very effective at concentrations as low as 66 ppm, resulting in both a technically and economically successful trial.

Bouts, M.N.; Samuel, A.J. [Koninklijke/Shell Research E and P Laboratorium, Rijswijk (Netherlands); Wiersma, R.J.; Muijs, H.M. [Koninklijke/Shell Laboratorium Amsterdam (Netherlands)

1995-09-01T23:59:59.000Z

310

An evaluation of new asphaltene inhibitors: Laboratory study and field testing  

SciTech Connect (OSTI)

Three candidate asphaltene inhibitors have been laboratory tested for their effectiveness on a Canadian crude. One inhibitor, an oil-soluble polymeric dispersant developed by Shell Chemicals, showed superior behavior compared to the others: flocculation titrations with n-heptane resulted in an optimum concentration of 1,300 ppm. PVT calculations, however, indicated that the prevailing conditions downhole can be quite favorable with respect to the amount of effective inhibitor compared to the atmospheric laboratory titrations which appear to be quite severe tests. Therefore, lower initial concentrations were recommended for a field trial. The chemical could be continuously injected through a capillary string, thereby avoiding the lost oil production associated with solvent cleaning operations. It has proved to be very effective at concentrations as low as 66 ppm, resulting in both a technically and an economically successful trial.

Bouts, M.N.; Wiersma, R.J.; Muijs, H.M.; Samuel, A.J.

1995-11-01T23:59:59.000Z

311

Field and Laboratory Certification Testing for Compliance with the New York City Building Code  

Science Journals Connector (OSTI)

The Noise Control Section of the New York City Building Code contains specific acoustical requirements for indoor and outdoor mechanical equipment servicing multi?family dwellings. Acoustical requirements are also specified for partition and floor?ceiling constructions separating dwelling units from each other and from corridors and mechanical equipment spaces. As of 19 June 1972 the Housing and Development Administration New York City Department of Buildings issued a directive specifying the methods of compliance with the Noise Control Section of the New York City Building Code. The methods outlined are field testing or laboratory certification for Building Department approval to obtain a certificate of occupancy. An examination of both methods will be emphasized with selection and application of the most likely test method for compliance with the New York City Building Code and other federal state or local EPA codes.

Steven Wolf

1973-01-01T23:59:59.000Z

312

Multivariate accelerated shelf-life testing: a novel approach for determining the shelf-life of foods  

E-Print Network [OSTI]

Multivariate accelerated shelf-life testing: a novel approach for determining the shelf-lives, accelerated studies have to be conducted and a third parameter has to be estimated: the acceleration factor approach for determining the shelf-life of industrialised food products, the Multivariate Accelerated Shelf

Ferreira, Márcia M. C.

313

Field Testing of Nano-PCM-Enhanced Building Envelope Components in a Warm-Humid Climate  

SciTech Connect (OSTI)

The U.S. Department of Energy Building Technologies Program s goal of developing high-performance, energy-efficient buildings will require more cost-effective, durable, energy-efficient building envelopes. Forty-eight percent of the residential enduse energy consumption is spent on space heating and air conditioning. Reducing envelope-generated heating and cooling loads through application of phase-change material (PCM) enhanced envelope components can facilitate maximizing the energy efficiency of buildings. Field testing of prototype envelope components is an important step in estimating their energy benefits. An innovative PCM (nano-PCM) was developed with PCM encapsulated with expanded graphite (interconnected) nanosheets, which is highly conducive for enhanced thermal storage and energy distribution, and is shape-stable for convenient incorporation into lightweight building components. During 2012, two test walls with cellulose cavity insulation and prototype PCM-enhanced interior wallboards were installed in a natural exposure test (NET) facility in Charleston, SC. The first test wall was divided into four sections separated by wood studs and thin layers of foam insulation. Two sections contained nano-PCMenhanced wallboards: one was a three-layer structure in which nano-PCM was sandwiched between two gypsum boards, and the other one had PCM dispersed homogeneously throughout graphite nanosheet-enhanced gypsum board. The second test wall also contained two sections with interior PCM wallboards; one contained nano-PCM dispersed homogeneously in gypsum and the other was gypsum board containing a commercial microencapsulated PCM (MEPCM) for comparison. Each test wall contained a section covered with gypsum board on the interior side that served as control or a baseline for evaluation of the PCM wallboards. The walls were instrumented with arrays of thermocouples and heat flux transducers. This paper presents the measured performance and analysis to evaluate the energy-saving potential of the nano-PCM-enhanced building components.

Biswas, Kaushik [ORNL; LuPh.D., Jue [Technova Corporation; Soroushian, Parviz [Technova Corporation

2013-01-01T23:59:59.000Z

314

Seismic yield determination of Soviet underground nuclear explosions at the Shagan River test site  

Science Journals Connector (OSTI)

......1986a, Yield estimates of Nevada test site explosions obtained from seismic...Nuttli's method to estimate yield of Nevada test site explosions recorded on Lawrence...magnitude and explosion yield for Nevada Test Site explosions. He also applied......

Frode Ringdal; Peter D. Marshall; Ralph W. Alewine

1992-04-01T23:59:59.000Z

315

Determining surface-wave magnitudes from regional Nevada Test Site data  

Science Journals Connector (OSTI)

......surface-wave magnitudes from regional Nevada Test Site data Bradley B. Woods David...surface-wave magnitudes for 190 Nevada Test Site (NTS) shots using regional...underground nuclear explosions at Nevada Test Site 1971-1980, United Kingdom......

Bradley B. Woods; David G. Harkrider

1995-02-01T23:59:59.000Z

316

ARM - Field Campaign - NASA Coordinated Airborne CO2 Lidar Flight Test  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

govCampaignsNASA Coordinated Airborne CO2 Lidar Flight Test Campaign govCampaignsNASA Coordinated Airborne CO2 Lidar Flight Test Campaign Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : NASA Coordinated Airborne CO2 Lidar Flight Test Campaign 2009.07.27 - 2009.08.07 Lead Scientist : Edward Browell For data sets, see below. Description This airborne field test campaign was designed to obtain a coordinated set of remote CO2 Laser Absorption Spectrometer (LAS) measurements using the NASA Langley/ITT 1.57-micron Continuous-Wave (CW) LAS operating from the NASA Langley UC-12 aircraft; the NASA Goddard 1.57-micron pulsed LAS operating from the NASA Glenn Lear-25 aircraft; and the NASA Jet Propulsion Laboratory 2.0-micron CW-coherent LAS operating from a contracted Twin Otter aircraft. These remote LAS CO2 column measurements were compared with

317

Field Operations Program Chevrolet S-10 (Lead-Acid) Accelerated Reliability Testing - Final Report  

SciTech Connect (OSTI)

This report summarizes the Accelerated Reliability testing of five lead-acid battery-equipped Chevrolet S-10 electric vehicles by the US Department of Energy's Field Operations Program and the Program's testing partners, Electric Transportation Applications (ETA) and Southern California Edison (SCE). ETA and SCE operated the S-10s with the goal of placing 25,000 miles on each vehicle within 1 year, providing an accelerated life-cycle analysis. The testing was performed according to established and published test procedures. The S-10s' average ranges were highest during summer months; changes in ambient temperature from night to day and from season-to-season impacted range by as much as 10 miles. Drivers also noted that excessive use of power during acceleration also had a dramatic effect on vehicle range. The spirited performance of the S-10s created a great temptation to inexperienced electric vehicle drivers to ''have a good time'' and to fully utilize the S-10's acceleration capability. The price of injudicious use of power is greatly reduced range and a long-term reduction in battery life. The range using full-power accelerations followed by rapid deceleration in city driving has been 20 miles or less.

J. Francfort (INEEL); J. Argueta; M. Wehrey (Southern California Edison); D. Karner; L. Tyree (Electric Transportation Applications)

1999-07-01T23:59:59.000Z

318

Cosmological Radiative Transfer Codes Comparison Project I: The Static Density Field Tests  

E-Print Network [OSTI]

Radiative transfer simulations are now at the forefront of numerical astrophysics. They are becoming crucial for an increasing number of astrophysical and cosmological problems; at the same time their computational cost has come to the reach of currently available computational power. Further progress is retarded by the considerable number of different algorithms (including various flavours of ray-tracing and moment schemes) developed, which makes the selection of the most suitable technique for a given problem a non-trivial task. Assessing the validity ranges, accuracy and performances of these schemes is the main aim of this paper, for which we have compared 11 independent RT codes on 5 test problems: (0) basic physics, (1) isothermal H II region expansion and (2) H II region expansion with evolving temperature, (3) I-front trapping and shadowing by a dense clump, (4) multiple sources in a cosmological density field. The outputs of these tests have been compared and differences analyzed. The agreement between the various codes is satisfactory although not perfect. The main source of discrepancy appears to reside in the multi-frequency treatment approach, resulting in different thicknesses of the ionized-neutral transition regions and different temperature structure. The present results and tests represent the most complete benchmark available for the development of new codes and improvement of existing ones. To this aim all test inputs and outputs are made publicly available in digital form.

Ilian T. Iliev; Benedetta Ciardi; Marcelo A. Alvarez; Antonella Maselli; Andrea Ferrara; Nickolay Y. Gnedin; Garrelt Mellema; Taishi Nakamoto; Michael L. Norman; Alexei O. Razoumov; Erik-Jan Rijkhorst; Jelle Ritzerveld; Paul R. Shapiro; Hajime Susa; Masayuki Umemura; Daniel J. Whalen

2006-03-08T23:59:59.000Z

319

Experimental setup for the determination of the correction factors of the neutron doseratemeters in fast neutron fields  

SciTech Connect (OSTI)

The use of the U-120 Cyclotron of the IFIN-HH allowed to perform a testing bench with fast neutrons in order to determine the correction factors of the doseratemeters dedicated to neutron measurement. This paper deals with researchers performed in order to develop the irradiation facility testing the fast neutrons flux generated at the Cyclotron. This facility is presented, together with the results obtain in determining the correction factor for a doseratemeter dedicated to the neutron dose equivalent rate measurement.

Iliescu, Elena; Bercea, Sorin; Dudu, Dorin; Celarel, Aurelia [National Institute of R and D for Physics and Nuclear Engineering-Horia Hulubei, Reactorului 30 St, P.O.BOX MG-6,Magurele, cod 077125 (Romania)

2013-12-16T23:59:59.000Z

320

A field test of electromagnetic geophysical techniques for locating simulated in situ mining leach solution  

SciTech Connect (OSTI)

The US Bureau of Mines, The University of Arizona, Sandia National Laboratories, and Zonge Engineering and Research Organization, Inc., conducted cooperative field tests of six electromagnetic (EM) geophysical methods to compare their effectiveness in locating a brine solution simulating in situ leach solution or a high-conductivity plume of contamination. The brine was approximately 160 m below the surface. The testsite was the University's San Xavier experimental mine near Tucson, AZ. Geophysical surveys using surface and surface-borehole, time-domain electromagnetic (TEM) induction; surface controlled-source audiofrequency magnetotellurics (CSAMT); surface-borehole, frequency-domain electromagnetic (FEM) induction; crosshole FEM; and surface magnetic field ellipticity were conducted before and during brine injection. The surface TEM data showed a broad decrease in resistivity. CSAMT measurements with the conventional orientation did not detect the brine, but measurements with another orientation indicated some decrease in resistivity. The surface-borehole and crosshole methods located a known fracture and other fracture zones inferred from borehole induction logs. Surface magnetic field ellipticity data showed a broad decrease in resistivity at depth following brine injection.

Tweeton, D.R.; Hanson, J.C.; Friedel, M.J.; Sternberg, B.K.; Dahl, L.J.

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Field testing of paper/polymerized vegetable oil mulches for enhancing growth of eastern cottonwood trees for pulp  

Science Journals Connector (OSTI)

Field studies of biodegradable polymerized vegetable oil-coated paper mulches were conducted to determine if these could replace non-degradable polyethylene mulches for stopping weeds and promoting growth of cottonwood trees. Tests were conducted over two growing seasons in two adjacent field sites in southeastern Missouri. At the end of the 2001 season, eastern cottonwood trees grown on the coated paper mulches had average heights (4.574.66m, 15.015.3ft), which were not significantly different from the control black polyethylene mulch (4.75m, 15.6ft). Tree heights were significantly less for uncoated paper mulch (4.45m, 14.6ft) or no mulch (3.90m, 12.8ft), presumably due to heavy weed growth around the trees. Uncoated paper mulch was extensively degraded after only about 4 weeks, while the coated paper persisted until the fall. Addition of ZnO to the oil coating delayed the onset of visible degradation, such as the formation of holes and tears, especially near the buried edge and above the drip tube. Similar results were seen for the 2002 study except that weed growth was not extensive so that tree heights for the mulched and bare plots were not significantly different. These results suggest that polymerized vegetable oil-coated paper mulches can function as effective mulches during the first year of tree growth, and thus, eliminate the need to use non-degradable polyethylene mulches.

Randal L. Shogren; Randall J. Rousseau

2005-01-01T23:59:59.000Z

322

Vapor compression heat pump system field tests at the tech complex  

Science Journals Connector (OSTI)

The Tennessee Energy Conservation In Housing (TECH) complex has been utilized since 1977 as a field test site for several novel and conventional heat pump systems for space conditioning and water heating. Systems tested include the Annual Cycle Energy System (ACES) solar assisted heat pumps (SAHP) both parallel and series two conventional air?to?air heat pumps an air?to?air heat pump with desuperheater water heater and horizontal coil and multiple shallow vertical coil ground?coupled heat pumps (GCHP). A direct comparison of the measured annual performance of the test systems was not possible. However a cursory examination revealed that the ACES had the best performance however its high cost makes it unlikely that it will achieve wide?spread use. Costs for the SAHP systems are similar to those of the ACES but their performance is not as good. Integration of water heating and space conditioning functions with a desuperheater yielded significant efficiency improvement at modest cost. The GCHP systems performed much better for heating than for cooling and may well be the most efficient alternative for residences in cold climates.

Van D. Baxter

1985-01-01T23:59:59.000Z

323

Studies of strong-field gravity : testing the black hole hypothesis and investigating spin-curvature coupling  

E-Print Network [OSTI]

Observations of gravitational systems agree well with the predictions of general relativity (GR); however, to date we have only tested gravity in the weak-field limit. In the next few years, observational advances may make ...

Vigeland, Sarah Jane

2012-01-01T23:59:59.000Z

324

Estimation of the Residual Magnetic Field Strength Inside a Pipeline after Testing by a Magnetic Flaw Detector  

Science Journals Connector (OSTI)

The residual magnetic field strength inside a pipeline after testing by a magnetic flaw detector ... demagnetizing local joint-pipe sections in carrying out repair-welding works is proposed.

R. V. Zagidulin; V. F. Muzhitskii

2003-07-01T23:59:59.000Z

325

Determination of Topology Skeleton of Magnetic Fields in a Solar Active Region  

E-Print Network [OSTI]

The knowledge of magnetic topology is the key to understand magnetic energy release in astrophysics. Based on observed vector magnetograms, we have determined threedimensional (3D) topology skeleton of the magnetic fields in active region NOAA 10720. The skeleton consists of six 3D magnetic nulls and a network of corresponding spines, fans, and null-null lines. For the first time, we have identified a spiral magnetic null in Sun's corona. The magnetic lines of force twisted around the spine of the null, forming a 'magnetic wreath' with excess of free magnetic energy and resembling observed brightening structures at extraultraviolet (EUV) wavebands. We found clear evidence of topology eruptions which are referred to as the catastrophic changes of topology skeleton associated with a coronal mass ejection (CME) and an explosive X-ray flare. These results shed new lights in exploring the structural complexity and its role in explosive magnetic activity. In solar astrophysics and space science, the concept of flux rope has been widely used in modelling explosive magnetic activity, although their observational identity is obscure or, at least, lacking of necessary details. The current work suggests that the magnetic wreath associated with the 3D spiral null is likely an important class of the physical entity of flux ropes.

Hui Zhao; Jing-Xiu Wang; Jun Zhang; Chi-Jie Xiao; Hai-Min Wang

2007-12-20T23:59:59.000Z

326

Field Demonstration of CO2 Leakage Detection in Potable Aquifers with a Pulselike CO2-Release Test  

Science Journals Connector (OSTI)

Field Demonstration of CO2 Leakage Detection in Potable Aquifers with a Pulselike CO2-Release Test ... This study presents two field pulselike CO2-release tests to demonstrate CO2 leakage detection in a shallow aquifer by monitoring groundwater pH, alkalinity, and dissolved inorganic carbon (DIC) using the periodic groundwater sampling method and a fiber-optic CO2 sensor for real-time in situ monitoring of dissolved CO2 in groundwater. ...

Changbing Yang; Susan D. Hovorka; Jesus Delgado-Alonso; Patrick J. Mickler; Ramn H. Trevio; Straun Phillips

2014-11-10T23:59:59.000Z

327

Small Scale Field Test Demonstrating CO2 sequestration in Arbuckle Saline Aquifer and by CO2-EOR at Wellington field, Sumner County, Kansas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Scale Field Test Demonstrating CO Scale Field Test Demonstrating CO 2 sequestration in Arbuckle Saline Aquifer and by CO 2 -EOR at Wellington field, Sumner County, Kansas -- W. Lynn Watney and Jason Rush Kansas Geological Survey Lawrence, KS 66047 Regional Carbon Sequestration Partnerships Annual Review Meeting October 15-17, 2011 Pittsburgh, PA Funding Opportunity Number: DE-FOA-0000441 Contract #FE0006821 $11,484,499 DOE $3.236 million cost share KANSAS STATE UNIVERSITY 12/2/2011 1 Outline * Background * The Participants * The Plan * Leveraging Current Research at Wellington Field * Inject, Monitor, Verification, and Accounting of CO 2 2 ORGANIZATION CHART Kansas Geological Survey Name Project Job Title Primary Responsibility Lynn Watney Project Leader, Joint Principal Investigator

328

Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

i Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results Mary Ann Piette David Watson Naoya Motegi Sila Kiliccote Lawrence Berkeley National Laboratory MS90R3111 1 Cyclotron Road Berkeley, California 94720 June 19, 2007 LBNL Report Number 62218 ii Acknowledgements The work described in this report was funded by the Emerging Technologies Program at Pacific Gas and Electric Company. Additional funding was provided by the Demand Response Research Center which is funded by the California Energy Commission (Energy Commission), Public Interest Energy Research (PIER) Program, under Work for Others Contract No.500-03-026, Am #1 and by the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The authors are grateful for the extensive

329

DOE/NETL's Phase II Plans for Full-Scale Mercury Removal Technology Field-Testing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Phase II Plans for Full-Scale Phase II Plans for Full-Scale Mercury Removal Technology Field-Testing Air Quality III September 12, 2002 Arlington, Va Scott Renninger, Project Manager for Mercury Control Technology Enviromental Projects Division Presentation Outline * Hg Program goals & objectives * Focus on Future Hg control R&D * Q&As President Bush's Clear Skies Initiative Current Mid-Term 2008-2010 2018 SO 2 11 million tons 4.5 million tons 3 million tons NOx 5 million tons 2.1 million tons 1.7 million tons Mercury 48 tons 26 tons 15 tons Annual U.S. Power Plant Emissions Mercury Control * Developing technologies ready for commercial demonstration: - By 2005, reduce emissions 50-70% - By 2010, reduce emissions by 90% - Cost 25-50% less than current estimates 2000 Year 48 Tons $2 - 5 Billion @ 90% Removal w/Activated

330

Seismic wave propagation in coal seams: finite element modelling and field tests  

Science Journals Connector (OSTI)

In-seam seismic (ISS) refers to methods which utilise artificially generated channel waves trapped in coal seam to locate geologic disturbances and mine voids. It is one of the basic geophysical methods for underground survey. The advantage of ISS is that seismic energy is better preserved in coal seams and seismic waves can travel and be detected over much larger distances in comparison with body waves which radiate three-dimensionally. It is also convenient and reasonable to set up a two-dimensional model to study the wave propagation characteristics. Using a commercial finite element method (FEM) modelling software, both transmission and reflection tests were simulated. Field experiments of the ISS technology have been carried out at underground coal mines. The results demonstrated that two-dimensional FEM modelling appears to be a satisfactory approach for ISS simulation, and if used properly, ISS technology can successfully detect mine voids and geologic discontinuities.

Hongliang Wang; Maochen Ge

2014-01-01T23:59:59.000Z

331

An update on field test results for an engineered refractory for slagging gasifiers  

SciTech Connect (OSTI)

The widespread commercial adaptation of slagging gasifier technology to produce power, fuel, and/or chemicals from coal will depend in large measure on the technologys ability to prove itself both economic and reliable. Improvements in gasifier reliability, availability, and maintainability will in part depend on the development of improved performance structural materials with longer service life in this application. Current generation refractory materials used to line the air-cooled, slagging gasifier vessel, and contain the gasification reaction, often last no more than three to 18 months in commercial applications. The downtime required for tear-out and replacement of these critical materials contributes to gasifier on-line availabilities that fall short of targeted goals. In this talk we will discuss the development of an improved refractory material engineered by the NETL for longer service life in this application, and provide an update on recent field test results.

Dogan, O.N.; Alman, D.E.; Jablonski, P.D.; Hawk, J.A.

2006-05-01T23:59:59.000Z

332

Hydraulic characterization of aquifers by thermal response testing: Validation by large-scale tank and field experiments  

E-Print Network [OSTI]

Hydraulic characterization of aquifers by thermal response testing: Validation by large-scale tank by application to a well-controlled, large-scale tank experiment with 9 m length, 6 m width, and 4.5 m depth, and by data interpretation from a field-scale test. The tank experiment imitates an advection-influenced TRT

Cirpka, Olaf Arie

333

Use of the Hebb-Williams closed-field maze to determine learning ability in yearling horses  

E-Print Network [OSTI]

USE OF THE HEBB-WILLIAMS CLOSED-FIELD MAZE TO DETERMINE LEARNING ABILITY IN YEARLING HORSES A Thesis by CYNTHIA ANN McCALL Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE August 1979 Major Subject: Animal Science USE OF THE HEBB-WILLIAMS CLOSED-FIELD MAZE TO DETERMINE LEARNING ABILITY IN YEARLING HORSES A Thesis by CYNTHIA ANN McCALL Approved as to style and content by: (Chai n of mmittee...

McCall, Cynthia Ann

1979-01-01T23:59:59.000Z

334

Negative magnetic eddy diffusivities from test-field method and multiscale stability theory  

E-Print Network [OSTI]

The generation of large-scale magnetic field in the kinematic regime in the absence of an alpha-effect is investigated by following two different approaches, namely the test-field method and multiscale stability theory relying on the homogenisation technique. We show analytically that the former, applied for the evaluation of magnetic eddy diffusivities, yields results that fully agree with the latter. Our computations of the magnetic eddy diffusivity tensor for the specific instances of the parity-invariant flow-IV of G.O. Roberts and the modified Taylor-Green flow in a suitable range of parameter values confirm the findings of previous studies, and also explain some of their apparent contradictions. The two flows have large symmetry groups; this is used to considerably simplify the eddy diffusivity tensor. Finally, a new analytic result is presented: upon expressing the eddy diffusivity tensor in terms of solutions to auxiliary problems for the adjoint operator, we derive relations between magnetic eddy dif...

Andrievsky, Alexander; Noullez, Alain; Zheligovsky, Vladislav

2015-01-01T23:59:59.000Z

335

THE WIDE-AREA ENERGY STORAGE AND MANAGEMENT SYSTEM PHASE II Final Report - Flywheel Field Tests  

SciTech Connect (OSTI)

This research was conducted by Pacific Northwest National Laboratory (PNNL) operated for the U.S. department of Energy (DOE) by Battelle Memorial Institute for Bonneville Power Administration (BPA), California Institute for Energy and Environment (CIEE) and California Energy Commission (CEC). A wide-area energy management system (WAEMS) is a centralized control system that operates energy storage devices (ESDs) located in different places to provide energy and ancillary services that can be shared among balancing authorities (BAs). The goal of this research is to conduct flywheel field tests, investigate the technical characteristics and economics of combined hydro-flywheel regulation services that can be shared between Bonneville Power Administration (BPA) and California Independent System Operator (CAISO) controlled areas. This report is the second interim technical report for Phase II of the WAEMS project. This report presents: 1) the methodology of sharing regulation service between balancing authorities, 2) the algorithm to allocate the regulation signal between the flywheel and hydro power plant to minimize the wear-and-tear of the hydro power plants, 3) field results of the hydro-flywheel regulation service (conducted by the Beacon Power), and 4) the performance metrics and economic analysis of the combined hydro-flywheel regulation service.

Lu, Ning; Makarov, Yuri V.; Weimar, Mark R.; Rudolph, Frank; Murthy, Shashikala; Arseneaux, Jim; Loutan, Clyde; Chowdhury, S.

2010-08-31T23:59:59.000Z

336

The MOG Weak Field approximation II. Observational test of Chandra X-ray Clusters  

E-Print Network [OSTI]

We apply the weak field approximation limit of the covariant Scalar-Tensor-Vector Gravity (STVG) theory, so-called MOdified gravity (MOG), to the dynamics of clusters of galaxies by using only baryonic matter. The MOG effective gravitational potential in the weak field approximation is composed of an attractive Newtonian term and a repulsive Yukawa term with two parameters $\\alpha$ and $\\mu$. The numerical values of these parameters have been obtained by fitting the predicted rotation curves of galaxies to observational data, yielding the best fit result: $\\alpha = 8.89 \\pm 0.34$ and $\\mu= 0.042\\pm 0.004$ kpc$^{-1}$~\\cite{rah13}. We extend the observational test of this theory to clusters of galaxies, using data for the ionized gas and the temperature profile of nearby clusters obtained by the Chandra X-ray telescope. Using the MOG virial theorem for clusters, we compare the mass profiles of clusters from observation and theory for eleven clusters. The theoretical mass profiles for the inner parts of clusters exceed the observational data. However, the observational data for the inner parts of clusters (i.e., $r<0.1 r_{500}$) is scattered, but at distances larger than $\\sim 300$ kpc, the observed and predicted mass profiles converge. Our results indicate that MOG as a theory of modified gravity is compatible with the observational data from the the solar system to Mega parsec scales without invoking dark matter.

J. W. Moffat; S. Rahvar

2014-06-07T23:59:59.000Z

337

field  

National Nuclear Security Administration (NNSA)

9%2A en Ten-Year Site Plans (TYSP) http:nnsa.energy.govaboutusouroperationsinfopsinfopstysp

field field-type-text field-field-page-name">

338

Correlation of cyclic testing procedures for determining liquefaction potential of sands  

E-Print Network [OSTI]

APPARATUS 6. TRIAXIAL CELL USED IN INITIAL TEST SERIES 7. BASEPLATE USED IN INITIAL TEST SERIES 8. INITIAL TEST APPARATUS 9. SCHEMATIC OF TOP CAP AND PISTON MODIFICATIONS 10. SCHEMATIC OF FINAL TEST APPARATUS 11. COMPARISON OF TRIAXIAL BASEPLATES 12...ons may occur during a storm. During earthquakes the permeability of the The style and format of this thesis follow that used by the Journal of the Geotechnical En i neerin D1v1sion, American Society of Civil Engineers. sediment is not usually a...

Janicek, John Patrick

2012-06-07T23:59:59.000Z

339

Determining error bounds for hypothesis tests in risk assessment: a research agenda  

Science Journals Connector (OSTI)

......in their relative political, economic or social...HYPOTHESIS TESTS IN RISK ASSESSMENT 19 may...HYPOTHESIS TESTS IN RISK ASSESSMENT 23 themselves...democracy theorists in political science have noted...democracy current in political theory (Bessette...At present, risk decision thresholds......

Peter McBurney; Simon Parsons

2002-07-01T23:59:59.000Z

340

DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed Coverage Determination (Energy Conservation Standard) for Set-Top Boxes  

Broader source: Energy.gov [DOE]

The Department of Energy (DOE) has issued pre-publication Federal Register notices withdrawing the notice of proposed rulemaking for a test procedure for set-top boxes and the proposed coverage determination for set-top boxes and network equipment.

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Method to determine and adjust the alignment of the transmitter and receiver fields of view of a LIDAR system  

DOE Patents [OSTI]

A method to determine the alignment of the transmitter and receiver fields of view of a light detection and ranging (LIDAR) system. This method can be employed to determine the far-field intensity distribution of the transmitter beam, as well as the variations in transmitted laser beam pointing as a function of time, temperature, or other environmental variables that may affect the co-alignment of the LIDAR system components. In order to achieve proper alignment of the transmitter and receiver optical systems when a LIDAR system is being used in the field, this method employs a laser-beam-position-sensing detector as an integral part of the receiver optics of the LIDAR system.

Schmitt, Randal L. (Tijeras, NM); Henson, Tammy D. (Albuquerque, NM); Krumel, Leslie J. (Cedar Crest, NM); Hargis, Jr., Philip J. (Albuquerque, NM)

2006-06-20T23:59:59.000Z

342

Development and testing of a standard procedure for determining the viscous properties of crosslinked fracture fluids  

E-Print Network [OSTI]

of the shear rate at the bob by use of the Kr ieger correction. During the develop- ment of the testing pr ocedur e, it was discover ed that the gel experienced shear degradation when subjected to an incr easing shear rate. Therefore, the shear rate should... always be decreased when measuring these fluids. The applicability of the testing procedure was verified by test- ing gel systems supplied by four service companies with gel concentrations of 0. 48$ and 0. 72$ HPG (40 and 60 Ib/1000 gal, respectively...

Worlow, David Wayne

1987-01-01T23:59:59.000Z

343

GOCE gravity field determination by means of rotational invariants: first experiences  

E-Print Network [OSTI]

on high performance computing platforms and have been tested successfully within the framework of the algorithms on high performance computing platforms. 2. Invariants representation The basic observation

Stuttgart, Universität

344

Implementation and Evaluation of the Virtual Fields Method: Determining Constitutive Model Parameters From Full-Field Deformation Data.  

SciTech Connect (OSTI)

The Virtual Fields Method (VFM) is an inverse method for constitutive model parameter identication that relies on full-eld experimental measurements of displacements. VFM is an alternative to standard approaches that require several experiments of simple geometries to calibrate a constitutive model. VFM is one of several techniques that use full-eld exper- imental data, including Finite Element Method Updating (FEMU) techniques, but VFM is computationally fast, not requiring iterative FEM analyses. This report describes the im- plementation and evaluation of VFM primarily for nite-deformation plasticity constitutive models. VFM was successfully implemented in MATLAB and evaluated using simulated FEM data that included representative experimental noise found in the Digital Image Cor- relation (DIC) optical technique that provides full-eld displacement measurements. VFM was able to identify constitutive model parameters for the BCJ plasticity model even in the presence of simulated DIC noise, demonstrating VFM as a viable alternative inverse method. Further research is required before VFM can be adopted as a standard method for constitu- tive model parameter identication, but this study is a foundation for ongoing research at Sandia for improving constitutive model calibration.

Kramer, Sharlotte Lorraine Bolyard; Scherzinger, William M.

2014-09-01T23:59:59.000Z

345

Beam Homogeneity Dependence on the Magnetic Filter Field at the IPP Test Facility MANITU  

SciTech Connect (OSTI)

The homogeneity of the extracted current density from the large RF driven negative hydrogen ion sources of the ITER neutral beam system is a critical issue for the transmission of the negative ion beam through the accelerator and the beamline components. As a first test, the beam homogeneity at the IPP long pulse test facility MANITU is measured by means of the divergence and the stripping profiles obtained with a spatially resolved Doppler-shift spectroscopy system. Since MANITU is typically operating below the optimum perveance, an increase in the divergence corresponds to a lower local extracted negative ion current density if the extraction voltage is constant. The beam H{sub {alpha}} Doppler-shift spectroscopy is a rather simple tool, as no absolute calibration - both for the wavelength and the emission - is necessary. Even no relative calibration of the different used lines of sight is necessary for divergence and stripping profiles as these quantities can be obtained by the line broadening of the Doppler-shifted peak and the ratio of the integral of the stripping peak to the integral of the Doppler-shifted peak, respectively. The paper describes the H{sub {alpha}} MANITU Doppler-shift spectroscopy system which is now operating routinely and the evaluation methods of the divergence and the stripping profiles. Beam homogeneity measurements are presented for different extraction areas and magnetic filter field configurations both for Hydrogen and Deuterium operation; the results are compared with homogeneity measurements of the source plasma. The stripping loss measurements are compared with model calculations.

Franzen, P.; Fantz, U. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, PO Box 1533, 85740 Garching (Germany)

2011-09-26T23:59:59.000Z

346

MELT WIRE SENSORS AVAILABLE TO DETERMINE PEAK TEMPERATURES IN ATR IRRADIATION TESTING  

SciTech Connect (OSTI)

In April 2007, the Department of Energy (DOE) designated the Advanced Test Reactor (ATR) a National Scientific User Facility (NSUF) to advance US leadership in nuclear science and technology. By attracting new users from universities, laboratories, and industry, the ATR will support basic and applied nuclear research and development and help address the nation's energy security needs. In support of this new program, the Idaho National Laboratory (INL) has developed in-house capabilities to fabricate, test, and qualify new and enhanced temperature sensors for irradiation testing. Although most efforts emphasize sensors capable of providing real-time data, selected tasks have been completed to enhance sensors provided in irradiation locations where instrumentation leads cannot be included, such as drop-in capsule and Hydraulic Shuttle Irradiation System (HSIS) or 'rabbit' locations. To meet the need for these locations, the INL has developed melt wire temperature sensors for use in ATR irradiation testing. Differential scanning calorimetry and environmental testing of prototypical sensors was used to develop a library of 28 melt wire materials, capable of detecting peak irradiation temperatures ranging from 85 to 1500C. This paper will discuss the development work and present test results.

K. L. Davis; D. Knudson; J. Daw; J. Palmer; J. L. Rempe

2012-07-01T23:59:59.000Z

347

Development and testing of a photometric method to identify non-operating solar hot water systems in field settings.  

SciTech Connect (OSTI)

This report presents the results of experimental tests of a concept for using infrared (IR) photos to identify non-operational systems based on their glazing temperatures; operating systems have lower glazing temperatures than those in stagnation. In recent years thousands of new solar hot water (SHW) systems have been installed in some utility districts. As these numbers increase, concern is growing about the systems dependability because installation rebates are often based on the assumption that all of the SHW systems will perform flawlessly for a 20-year period. If SHW systems routinely fail prematurely, then the utilities will have overpaid for grid-energy reduction performance that is unrealized. Moreover, utilities are responsible for replacing energy for loads that failed SHW system were supplying. Thus, utilities are seeking data to quantify the reliability of SHW systems. The work described herein is intended to help meet this need. The details of the experiment are presented, including a description of the SHW collectors that were examined, the testbed that was used to control the system and record data, the IR camera that was employed, and the conditions in which testing was completed. The details of the associated analysis are presented, including direct examination of the video records of operational and stagnant collectors, as well as the development of a model to predict glazing temperatures and an analysis of temporal intermittency of the images, both of which are critical to properly adjusting the IR camera for optimal performance. Many IR images and a video are presented to show the contrast between operating and stagnant collectors. The major conclusion is that the technique has potential to be applied by using an aircraft fitted with an IR camera that can fly over an area with installed SHW systems, thus recording the images. Subsequent analysis of the images can determine the operational condition of the fielded collectors. Specific recommendations are presented relative to the application of the technique, including ways to mitigate and manage potential sources of error.

He, Hongbo (University of New Mexico, Albuquerque, NM); Vorobieff, Peter V. (University of New Mexico, Albuquerque, NM); Menicucci, David (University of New Mexico, Albuquerque, NM); Mammoli, Andrea A. (University of New Mexico, Albuquerque, NM); Carlson, Jeffrey J.

2012-06-01T23:59:59.000Z

348

Five years experience with a new method of field testing cross and quadrature polarized MHO distance relays. Part I  

SciTech Connect (OSTI)

Since 1981, the Saskatchewan Power Corporation (SaskPower) has used a new method to field test cross and quadrature polarized mho distance relays. Experience gained from the use of this new method to test distance relays from different manufacturers over the last five years is presented. The test method has been used successfully to predict and improve distance relay discrimination and to solve unexplained relay operations which was not possible with the previous test method. Discussions on the problems that arise from using this new method are also included. It is shown that unless the test procedures are properly designed, based on an understanding of the relay architecture, the distance relay can give erroneous results without malfunctioning. The test method described in this paper deals with circular relay characteristics, the type most commonly used by SaskPower.

Kennedy, W.O.; Gruell, B.J.; Shih, C.H.; Yee, L. (Saskatchewan Power Corp., Regina, Saskatchewan (CA))

1988-07-01T23:59:59.000Z

349

ISO test method to determine sustained-load-cracking resistance of aluminium cylinders  

SciTech Connect (OSTI)

Leak as well as rupture types of failures related to sustained-load-cracking (SLC) have been observed in high-pressure gas cylinders fabricated from certain aluminium alloy. The stable crack growth mechanism observed primarily in the cylinder neck and shoulder area have been identified as the SLC mechanism occurring at room temperature without any environmental effect. The International Organization for standardization (ISO) Sub-Committee 3, Working Group 16 has developed a test method to measure the SLC resistance using fracture mechanics specimens along with an acceptance criterion for aluminium cylinders. The technical rationale for the proposed test method and the physical significance of the acceptance criterion to the cylinder performance in terms of critical stress-crack size relationship is presented. Application of the developed test method for characterizing new aluminium alloy for manufacturing cylinders is demonstrated. SLC characteristics of several aluminium cylinders as well as on-board cylinders for natural gas vehicles assessed by the authors are discussed.

Bhuyan, G.S. [Powertech Labs. Inc., Surrey, British Columbia (Canada); Rana, M.D. [Praxair, Inc., Tonawanda, NY (United States)

1999-08-01T23:59:59.000Z

350

Modeling and Field Test Planning Activities in Support of Disposal of Heat-Generating Waste in Salt  

SciTech Connect (OSTI)

The modeling efforts in support of the field test planning conducted at LBNL leverage on recent developments of tools for modeling coupled thermal-hydrological-mechanical-chemical (THMC) processes in salt and their effect on brine migration at high temperatures. This work includes development related to, and implementation of, essential capabilities, as well as testing the model against relevant information and published experimental data related to the fate and transport of water. These are modeling capabilities that will be suitable for assisting in the design of field experiment, especially related to multiphase flow processes coupled with mechanical deformations, at high temperature. In this report, we first examine previous generic repository modeling results, focusing on the first 20 years to investigate the expected evolution of the different processes that could be monitored in a full-scale heater experiment, and then present new results from ongoing modeling of the Thermal Simulation for Drift Emplacement (TSDE) experiment, a heater experiment on the in-drift emplacement concept at the Asse Mine, Germany, and provide an update on the ongoing model developments for modeling brine migration. LBNL also supported field test planning activities via contributions to and technical review of framework documents and test plans, as well as participation in workshops associated with field test planning.

Rutqvist, Jonny; Blanco Martin, Laura; Mukhopadhyay, Sumit; Houseworth, Jim; Birkholzer, Jens

2014-09-26T23:59:59.000Z

351

Experimental test results presented for field-damaged orifice meter plates  

SciTech Connect (OSTI)

Tests demonstrate that, unlike other types of meters, there is minimal loss of accuracy with orifice meters even when operational excursions are such that severe damage occurs. Both flange taps and pipe taps effectively have the same general pattern in that the actual coefficient increases with increasing permanent deformation. Of the two types of orifice tap, these data indicate that flange-tapped orifices may be less susceptible to severe deformation. This is probably caused by changes in the local pressure gradients in the vicinity of the plate. Since pipe taps are at such a large distance from the plate, these changes are probably not noticeable due to the turbulent mixing that takes place. With orifice meters, visual inspection of the plates after severe operation is recommended, to tell the user if the plate is beyond specifications. With other types of meters (i.e., other than differential meters) recalibration is the only method of determining if the meter has been affected. Where damage is apparent, the plate (or the meter if it is not of the differential type) should be immediately replaced.

Teyssandier, R.G.; Chisman, W.E.

1984-04-30T23:59:59.000Z

352

Standard test method for the radiochemical determination of americium-241 in soil by alpha spectrometry  

E-Print Network [OSTI]

1.1 This method covers the determination of americium241 in soil by means of chemical separations and alpha spectrometry. It is designed to analyze up to ten grams of soil or other sample matrices that contain up to 30 mg of combined rare earths. This method allows the determination of americium241 concentrations from ambient levels to applicable standards. The values stated in SI units are to be regarded as standard. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precaution statements, see Section 10.

American Society for Testing and Materials. Philadelphia

2007-01-01T23:59:59.000Z

353

Development of a Simple Field Test for Vehicle Exhaust to Detect Illicit Use of Dyed Diesel Fuel  

SciTech Connect (OSTI)

The use of tax-free dyed fuel on public highways in the United States provides a convenient way of evading taxes. Current enforcement involves visual inspection for the red azo dye added to the fuel to designate its tax-free status. This approach has shortcomings such as the invasive nature of the tests and/or various deceptive tactics applied by tax evaders. A test designed to detect dyed fuel use by analyzing the exhaust would circumvent these shortcomings. This paper describes the development of a simple color spot test designed to detect the use of tax-free (dyed) diesel fuel by analyzing the engine exhaust. Development first investigated the combustion products of C.I. Solvent Red 164 (the azo dye formulation used in the United States to tag tax-free fuel). A variety of aryl amines were identified as characteristic molecular remnants that appear to survive combustion. A number of microanalytical color tests specific for aryl amines were then investigated. One test based on the use of 4-(dimethylamino)benzaldehyde seemed particularly applicable and was used in a proof-of-principle experiment. The 4-(dimethylamino)benzaldehyde color spot test was able to clearly distinguish between engines burning regular and dyed diesel fuel. Further development will refine this color spot test to provide an easy-to-use field test for Internal Revenue Service Field Compliance specialists.

Harvey, Scott D.; Wright, Bob W.

2011-10-30T23:59:59.000Z

354

On-site field tests for study of low-rank western coal fly ash. Technical summary report, field test No. 3. Big Brown Station electrostatic precipitator  

SciTech Connect (OSTI)

This report describes the results of field and laboratory studies of combined NH/sub 3/ and SO/sub 3/ conditioning at the Big Brown Station of Texas Utilities Generating Company. This unusual combination of conditioning agents is used routinely at the Big Brown Station in order to improve the performance of the cold-side electrostatic precipitators. The primary objectives of this field study were to evaluate the performance of one of the Big Brown precipitators, and to obtain data on the concentration, composition, and size distribution of the fly ash, as well as the composition of the flue gas and the overall and fractional collection efficiencies of the precipitator. The laboratory studies of the Big Brown fly ash were intended to further characterize the ash both physically and chemically, and to study the attenuation of the electrical resistivity of the ash associated with the surface film produced by the dual conditioning process and by the use of SO/sub 3/ conditioning alone. 6 references, 22 figures, 9 tables.

Dahlin, R. S.; Bickelhaupt, R. E.; Marchant, Jr., G. H.; Gooch, J. P.

1984-02-01T23:59:59.000Z

355

Determination of the gradient magnetic field above a sunspot based on observations of the HeI and FeI infrared lines  

Science Journals Connector (OSTI)

The magnetic field strength above 36 sunspots was studied using ... 030 nm and FeI 1082.837 nm magnetosensitive lines. The value of the field was determined directly by Zeeman splitting of the lines. The advantag...

L. M. Kozlova; B. V. Somov

2009-10-01T23:59:59.000Z

356

Microstructural, Electrical, and Mechanical Properties of Graphene Films on Flexible Substrate Determined by Cyclic Bending Test  

Science Journals Connector (OSTI)

Three kinds of graphene/polyimide specimen were prepared via transfer from graphene with thicknesses of 1, 2, and 3 nm, respectively. A self-designed bending tester was applied to carry out cyclic bending tests with various bending cycles and bending ...

Ba-Son Nguyen; Jen Fin Lin; Dung-Ching Perng

2014-10-17T23:59:59.000Z

357

Testing the Role of Radiation in Determining Tropical Cloud-Top Temperature  

Science Journals Connector (OSTI)

A cloud-resolving model is used to test the hypothesis that radiative cooling by water vapor emission is the primary control on the temperature of tropical anvil clouds. The temperature of ice clouds in the simulation can be increased or decreased ...

Bryce E. Harrop; Dennis L. Hartmann

2012-09-01T23:59:59.000Z

358

Hematological and hemorheological Determinants of the Six-Minute Walk Test Performance in Children with Sickle  

E-Print Network [OSTI]

with Sickle Cell Anemia Xavier Waltz1,2,3 , Marc Romana1,3 , Marie-Dominique Hardy-Dessources1,3 , Yann-established submaximal exercise reflecting the functional status and the clinical severity of sickle cell patients-minute walk test performance in children with sickle cell anemia. Hematological and hemorheological parameters

Boyer, Edmond

359

Categorical Exclusion Determination Form Program ofField Office: Sandia Site Office  

Broader source: Energy.gov (indexed) [DOE]

Carlsbad Programs Group, Building NPHB, Shop Carlsbad Programs Group, Building NPHB, Shop Location: Carlsbad, New Mexico Proposed Action or Project Description: American Recovery and Reinvestment Act: r Sandia National LaboratorieslNew Mexico (SNLINM) proposes to continue providing the experimental and field studies capacities needed to assist the U.S. Department of Energy's Field Office (CBFO) in assuring uninterrupted licensure and permitting of the Waste Isolation Pilot Plant Many of the experimental and field studies are performed in or commence from Building NPHB (National Parks Highway B). An integral part of these studies is the Shop (Rooms 704 and 70S). Facility Operations DB 1.1 - Rate increases < inflation (not power marketing) D B 1.2 - Training exercises and simulation DB 1.3 -

360

Quantitative determination of stress by inversion of speckle interferometer fringe patterns: experimental laboratory tests  

Science Journals Connector (OSTI)

......by the heat of drilling or ongoing time-dependent...general, the largest value of the...monitoring, borehole breakout and...30 min after drilling. Fig. 2b-1...taken 1 min after drilling. There are few...location displayed large and discontinuous...determination from a borehole (Bass 1986......

Douglas R. Schmitt; Mamadou S. Diallo; Frank Weichman

2006-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Field test of two high-pressure direct-contact downhole steam generators. Volume II. Oxygen/diesel system  

SciTech Connect (OSTI)

A field test of an oxygen/diesel fuel, direct contact steam generator has been completed. The field test, which was a part of Project DEEP STEAM and was sponsored by the US Department of Energy, involved the thermal stimulation of a well pattern in the Tar Zone of the Wilmington Oil Field. The activity was carried out in cooperation with the City of Long Beach and the Long Beach Oil Development Company. The steam generator was operated at ground level, with the steam and combustion products delivered to the reservoir through 2022 feet of calcium-silicate insulated tubing. The objectives of the test included demonstrations of safety, operational ease, reliability and lifetime; investigations of reservoir response, environmental impact, and economics; and comparison of those points with a second generator that used air rather than oxygen. The test was extensively instrumented to provide the required data. Excluding interruptions not attributable to the oxygen/diesel system, steam was injected 78% of the time. System lifetime was limited by the combustor, which required some parts replacement every 2 to 3 weeks. For the conditions of this particular test, the use of trucked-in LOX resulted in liess expense than did the production of the equivalent amount of high pressure air using on site compressors. No statistically significant production change in the eight-acre oxygen system well pattern occurred during the test, nor were any adverse effects on the reservoir character detected. Gas analyses during the field test showed very low levels of SOX (less than or equal to 1 ppM) in the generator gaseous effluent. The SOX and NOX data did not permit any conclusion to be drawn regarding reservoir scrubbing. Appreciable levels of CO (less than or equal to 5%) were measured at the generator, and in this case produced-gas analyses showed evidence of significant gas scrubbing. 64 figures, 10 tables.

Moreno, J.B.

1983-07-01T23:59:59.000Z

362

A FEASIBILITY AND OPTIMIZATION STUDY TO DETERMINE COOLING TIME AND BURNUP OF ADVANCED TEST REACTOR FUELS USING A NONDESTRUCTIVE TECHNIQUE  

SciTech Connect (OSTI)

The goal of this study presented is to determine the best available non-destructive technique necessary to collect validation data as well as to determine burn-up and cooling time of the fuel elements onsite at the Advanced Test Reactor (ATR) canal. This study makes a recommendation of the viability of implementing a permanent fuel scanning system at the ATR canal and leads3 to the full design of a permanent fuel scan system. The study consisted at first in determining if it was possible and which equipment was necessary to collect useful spectra from ATR fuel elements at the canal adjacent to the reactor. Once it was establish that useful spectra can be obtained at the ATR canal the next step was to determine which detector and which configuration was better suited to predict burnup and cooling time of fuel elements non-destructively. Three different detectors of High Purity Germanium (HPGe), Lanthanum Bromide (LaBr3), and High Pressure Xenon (HPXe) in two system configurations of above and below the water pool were used during the study. The data collected and analyzed was used to create burnup and cooling time calibration prediction curves for ATR fuel. The next stage of the study was to determine which of the three detectors tested was better suited for the permanent system. From spectra taken and the calibration curves obtained, it was determined that although the HPGe detector yielded better results, a detector that could better withstand the harsh environment of the ATR canal was needed. The in-situ nature of the measurements required a rugged fuel scanning system, low in maintenance and easy to control system. Based on the ATR canal feasibility measurements and calibration results it was determined that the LaBr3 detector was the best alternative for canal in-situ measurements; however in order to enhance the quality of the spectra collected using this scintillator a deconvolution method was developed. Following the development of the deconvolution method for ATR applications the technique was tested using one-isotope, multi-isotope and fuel simulated sources. Burnup calibrations were perfomed using convoluted and deconvoluted data. The calibrations results showed burnup prediction by this method improves using deconvolution. The final stage of the deconvolution method development was to perform an irradiation experiment in order to create a surrogate fuel source to test the deconvolution method using experimental data. A conceptual design of the fuel scan system is path forward using the rugged LaBr3 detector in an above the water configuration and deconvolution algorithms.

Jorge Navarro

2013-12-01T23:59:59.000Z

363

Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Agency -  

Broader source: Energy.gov (indexed) [DOE]

L L ocation: *- Multiple States - New York, Pennsylvania Proposed Action or Project Description: American Recovery and Reinvestment Act: D Funding will support small-scale laboratory research , design, fabrication and pilot-sca le testing of the Inertial C02 Extraction System (ICES), an aero-thermodynamic inertial separation device for use in carbon capture processes. Funding will also support computationa l and performance modeling, econom ic modeling, and commercialization/transition planning for the IC ES system under development. Proposed work consists of (1) R&D tasks to be completed in laboratory, fabrication and testing facilities located at ATK's GAS L testing and research center in Ronkonkoma, NY, (2) Technical performance modeling and design work at Acent Laboratories in Manorville, NY, and

364

Field Evaluation of the SFE-lnfrared Method for Total Petroleum Hydrocarbon (TPH) Determinations  

Science Journals Connector (OSTI)

......No differences in operation (e.g., warm-up...several hours of operation. Contrary to our...frustrate future field operations were the lack of...that the restrictor heater supplied with the...at the expense of cold fin gers). Based...conducted in cold weather. Other extractor......

Steven B. Hawthorne; David J. Miller; Kristin M. Hegvik

1993-01-01T23:59:59.000Z

365

Receptive Field Organization Determines Pyramidal Cell Stimulus-Encoding Capability and Spatial Stimulus Selectivity  

E-Print Network [OSTI]

field around the body via an electric organ and continuously monitor this electric organ discharge (EOD). Electrorecep- tors designed to encode the amplitude and the timing of the EOD (Scheich et al., 1973) project to as E and I cells because they respond to increased EOD amplitude with excitation and i

Chacron, Maurice

366

Determination of deuteron quadrupole moment from calculations of the electric field gradient in D{sub 2} and HD  

SciTech Connect (OSTI)

We have carried out an accurate determination of the quadrupole moment of the deuteron nucleus. The evaluation of the constant is achieved by combining high accuracy Born-Oppenheimer calculations of the electric field gradient at the nucleus in the H{sub 2} molecule with spectroscopic measurements of the quadrupolar splitting in D{sub 2} and HD. The derived value is Q=0.285783(30) fm{sup 2}.

Pavanello, Michele; Tung Weicheng; Adamowicz, Ludwik [Department of Chemistry and Biochemistry, University of Arizona, Tucson, Arizona 85721 (United States)

2010-04-15T23:59:59.000Z

367

Deep-Sea Field Test of the CH4 Hydrate to CO2 Hydrate Spontaneous Conversion Hypothesis  

Science Journals Connector (OSTI)

We have carried out a small-scale deep-sea field test of the hypothesis that CH4 gas can be spontaneously produced from CH4 hydrate by injection of a CO2/N2 gas mixture, thereby inducing release of the encaged molecules with sequestration of the injected ...

Peter G. Brewer; Edward T. Peltzer; Peter M. Walz; Elizabeth K. Coward; Laura A. Stern; Stephen H. Kirby; John Pinkston

2014-10-06T23:59:59.000Z

368

Field Test and Evaluation Report Five Photovoltaic Power Systems for the City of Tucson  

Broader source: Energy.gov [DOE]

Members of the DOE solar energy Tiger Team tested five municipally owned, grid connected photovoltaic (PV) power systems for the City of Tucson on March 26 and 27, 2008. The five PV systems tested were Southeast Service Center, Clements Fitness Center, and Thonydale water treatment plant systems 1, 2, and 3. During all tests, skies were virtually cloudless with only occasional, high cirrus present, and none during array testing.

369

Standard test method for determination of susceptibility of metals to embrittlement in hydrogen containing environments at high pressure, high temperature, or both  

E-Print Network [OSTI]

Standard test method for determination of susceptibility of metals to embrittlement in hydrogen containing environments at high pressure, high temperature, or both

American Society for Testing and Materials. Philadelphia

1998-01-01T23:59:59.000Z

370

Full scale field test of the in situ air stripping process at the Savannah River integrated demonstration test site  

SciTech Connect (OSTI)

Under sponsorship from the US Department of Energy, technical personnel from the Savannah River Laboratory (SRL) and other DOE laboratories, universities and private industry have completed a full scale demonstration of environmental remediation using horizontal wells. This demonstration was performed as Phase I of an Integrated Demonstration Project designed to evaluate innovative remediation technologies for environmental restoration of sites contaminated with organic contaminants. The demonstration utilized two directionally drilled horizontal wells to deliver gases and extract contaminants from the subsurface. The resulting in situ air stripping process was designed to remediate soils and sediments above and below the water table as well as groundwater contaminated with volatile organic contaminants. The 139 day long test successfully removed volatile chlorinated solvents from the subsurface using the two horizontal wells. One well, approximately 300 ft (90m) long and 165 ft (50m) deep drilled below a contaminant plume in the groundwater, was used to inject air and strip the contaminants from the groundwater. A second horizontal well, approximately 175 ft (53m) long and 75 ft (23m) deep in the vadose zone, was used to extract residual contamination in the vadose zone along with the material purged from the groundwater. Pretest and posttest characterization data and monitoring data during the demonstration were collected to aid in interpretation of the test and to provide the information needed for future environmental restoration that employ directionally drilled wells as extraction or delivery systems. Contaminant concentration data and microbiological monitoring data are summarized in this report; the characterization data and geophysical monitoring data are documented in a series of related project reports.

Looney, B.B.; Hazen, T.C.; Kaback, D.S.; Eddy, C.A.

1991-06-29T23:59:59.000Z

371

Standard test method for determination of impurities in nuclear grade uranium compounds by inductively coupled plasma mass spectrometry  

E-Print Network [OSTI]

1.1 This test method covers the determination of 67 elements in uranium dioxide samples and nuclear grade uranium compounds and solutions without matrix separation by inductively coupled plasma mass spectrometry (ICP-MS). The elements are listed in Table 1. These elements can also be determined in uranyl nitrate hexahydrate (UNH), uranium hexafluoride (UF6), triuranium octoxide (U3O8) and uranium trioxide (UO3) if these compounds are treated and converted to the same uranium concentration solution. 1.2 The elements boron, sodium, silicon, phosphorus, potassium, calcium and iron can be determined using different techniques. The analyst's instrumentation will determine which procedure is chosen for the analysis. 1.3 The test method for technetium-99 is given in Annex A1. 1.4 The values stated in SI units are to be regarded as standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish ...

American Society for Testing and Materials. Philadelphia

2010-01-01T23:59:59.000Z

372

Method to determine the position-dependant metal correction factor for dose-rate equivalent laser testing of semiconductor devices  

DOE Patents [OSTI]

A method reconstructs the charge collection from regions beneath opaque metallization of a semiconductor device, as determined from focused laser charge collection response images, and thereby derives a dose-rate dependent correction factor for subsequent broad-area, dose-rate equivalent, laser measurements. The position- and dose-rate dependencies of the charge-collection magnitude of the device are determined empirically and can be combined with a digital reconstruction methodology to derive an accurate metal-correction factor that permits subsequent absolute dose-rate response measurements to be derived from laser measurements alone. Broad-area laser dose-rate testing can thereby be used to accurately determine the peak transient current, dose-rate response of semiconductor devices to penetrating electron, gamma- and x-ray irradiation.

Horn, Kevin M.

2013-07-09T23:59:59.000Z

373

Research and development of energy-efficient appliance motor-compressors. Volume IV. Production demonstration and field test  

SciTech Connect (OSTI)

Two models of a high-efficiency compressor were manufactured in a pilot production run. These compressors were for low back-pressure applications. While based on a production compressor, there were many changes that required production process changes. Some changes were performed within our company and others were made by outside vendors. The compressors were used in top mount refrigerator-freezers and sold in normal distribution channels. Forty units were placed in residences for a one-year field test. Additional compressors were built so that a life test program could be performed. The results of the field test reveal a 27.0% improvement in energy consumption for the 18 ft/sup 3/ high-efficiency model and a 15.6% improvement in the 21 ft/sup 3/ improvement in the 21 ft/sup 3/ high-efficiency model as compared to the standard production unit.

Middleton, M.G.; Sauber, R.S.

1983-09-01T23:59:59.000Z

374

In situ vitrification application to buried waste: Final report of intermediate field tests at Idaho National Engineering Laboratory  

SciTech Connect (OSTI)

This report describes two in situ vitrification field tests conducted on simulated buried waste pits during June and July 1990 at the Idaho National Engineering Laboratory. In situ vitrification, an emerging technology for in place conversion of contaminated soils into a durable glass and crystalline waste form, is being investigated as a potential remediation technology for buried waste. The overall objective of the two tests was to access the general suitability of the process to remediate waste structures representative of buried waste found at Idaho National Engineering Laboratory. In particular, these tests, as part of a treatability study, were designed to provide essential information on the field performance of the process under conditions of significant combustible and metal wastes and to test a newly developed electrode feed technology. The tests were successfully completed, and the electrode feed technology successfully processed the high metal content waste. Test results indicate the process is a feasible technology for application to buried waste. 33 refs., 109 figs., 39 tabs.

Callow, R.A.; Weidner, J.R.; Loehr, C.A.; Bates, S.O. (EG and G Idaho, Inc., Idaho Falls, ID (United States)); Thompson, L.E.; McGrail, B.P. (Pacific Northwest Lab., Richland, WA (United States))

1991-08-01T23:59:59.000Z

375

E-Print Network 3.0 - analog field tests Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science and Engineering, SOC (System-on-Chip) Design and Test Lab. Collection: Engineering 73 How scientists think: On-line creativity and conceptual change in Summary:...

376

RECONSTRUCTING THE INITIAL DENSITY FIELD OF THE LOCAL UNIVERSE: METHODS AND TESTS WITH MOCK CATALOGS  

SciTech Connect (OSTI)

Our research objective in this paper is to reconstruct an initial linear density field, which follows the multivariate Gaussian distribution with variances given by the linear power spectrum of the current cold dark matter model and evolves through gravitational instabilities to the present-day density field in the local universe. For this purpose, we develop a Hamiltonian Markov Chain Monte Carlo method to obtain the linear density field from a posterior probability function that consists of two components: a prior of a Gaussian density field with a given linear spectrum and a likelihood term that is given by the current density field. The present-day density field can be reconstructed from galaxy groups using the method developed in Wang et al. Using a realistic mock Sloan Digital Sky Survey DR7, obtained by populating dark matter halos in the Millennium simulation (MS) with galaxies, we show that our method can effectively and accurately recover both the amplitudes and phases of the initial, linear density field. To examine the accuracy of our method, we use N-body simulations to evolve these reconstructed initial conditions to the present day. The resimulated density field thus obtained accurately matches the original density field of the MS in the density range 0.3{approx}<{rho}/ {rho}-bar {approx}<20 without any significant bias. In particular, the Fourier phases of the resimulated density fields are tightly correlated with those of the original simulation down to a scale corresponding to a wavenumber of {approx}1 h Mpc{sup -1}, much smaller than the translinear scale, which corresponds to a wavenumber of {approx}0.15 h Mpc{sup -1}.

Wang Huiyuan [Key Laboratory for Research in Galaxies and Cosmology, Department of Astronomy, University of Science and Technology of China, Hefei, Anhui 230026 (China); Mo, H. J. [Department of Astronomy, University of Massachusetts, Amherst, MA 01003-9305 (United States); Yang Xiaohu [Key Laboratory for Research in Galaxies and Cosmology, Shanghai Astronomical Observatory, Shanghai 200030 (China); Van den Bosch, Frank C., E-mail: whywang@mail.ustc.edu.cn [Astronomy Department, Yale University, P.O. Box 208101, New Haven, CT 06520-8101 (United States)

2013-07-20T23:59:59.000Z

377

Aquaporins are major determinants of water use efficiency of rice plants in the field  

Science Journals Connector (OSTI)

Abstract This study aimed at specifying the reasons of unbalanced water relations of rice in the field at midday which results in slowing down photosynthesis and reducing water use efficiency (WUE) in japonica and indica rice under well-watered and droughted conditions. Leaf relative water content (RWC) decreased in the well-watered plants at midday in the field, but more dramatically in the droughted indica (75.6 and 71.4%) than japonica cultivars (85.5 and 80.8%). Gas exchange was measured at three points during the day (9:00, 13:00 and 17:00). Leaf internal CO2 (Ci) was not depleted when midday stomatal depression was highest indicating that Ci was not limiting to photosynthesis. Most aquaporins were predominantly expressed in leaves suggesting higher water permeability in leaves than in roots. The expression of leaf aquaporins was further induced by drought at 9:00 without comparable responses in roots. The data suggest that aquaporin expression in the root endodermis was limiting to water uptake. Upon removal of the radial barriers to water flow in roots, transpiration increased instantly and photosynthesis increased after 4h resulting in increasing WUE after 4h, demonstrating that WUE in rice is largely limited by the inadequate aquaporin expression profiles in roots.

Reham M. Nada; Gaber M. Abogadallah

2014-01-01T23:59:59.000Z

378

Wireless Field Buses for Aerospace Ground and In-Flight Testing: an Experiment  

E-Print Network [OSTI]

industry hardware system testing. Simulation results show the feasibility and the limits of a software, including safety aspects. One of the most critical tests is the measurement of the pressure around the wings, but Henaut et al. (2008) shows that the radiate

Paris-Sud XI, Université de

379

Field Test Report: Preliminary Aquifer Test Characterization Results for Well 299-W15-225: Supporting Phase I of the 200-ZP-1 Groundwater Operable Unit Remedial Design  

SciTech Connect (OSTI)

This report examines the hydrologic test results for both local vertical profile characterization and large-scale hydrologic tests associated with a new extraction well (well 299-W15-225) that was constructed during FY2009 for inclusion within the future 200-West Area Groundwater Treatment System that is scheduled to go on-line at the end of FY2011. To facilitate the analysis of the large-scale hydrologic test performed at newly constructed extraction well 299-W15-225 (C7017; also referred to as EW-1 in some planning documents), the existing 200-ZP-1 interim pump-and-treat system was completely shut-down ~1 month before the performance of the large-scale hydrologic test. Specifically, this report 1) applies recently developed methods for removing barometric pressure fluctuations from well water-level measurements to enhance the detection of hydrologic test and pump-and-treat system effects at selected monitor wells, 2) analyzes the barometric-corrected well water-level responses for a preliminary determination of large-scale hydraulic properties, and 3) provides an assessment of the vertical distribution of hydraulic conductivity in the vicinity of newly constructed extraction well 299-W15-225. The hydrologic characterization approach presented in this report is expected to have universal application for meeting the characterization needs at other remedial action sites located within unconfined and confined aquifer systems.

Spane, Frank A.; Newcomer, Darrell R.

2009-09-23T23:59:59.000Z

380

Pilot test of Pickliq{reg_sign} process to determine energy and environmental benefits & economic feasibility  

SciTech Connect (OSTI)

Green Technology Group (GTG) was awarded Grant No. DE-FG01-96EE 15657 in the amount of $99,904 for a project to advance GTG`s Pickliq{reg_sign} Process in the Copper and Steel Industries. The use of the Pickliq{reg_sign} Process can significantly reduce the production of waste acids containing metal salts. The Pickliq{reg_sign} Process can save energy and eliminate hazardous waste in a typical copper rod or wire mill or a typical steel wire mill. The objective of this pilot project was to determine the magnitude of the economic, energy and environmental benefits of the Pickliq{reg_sign} Process in two applications within the metal processing industry. The effectiveness of the process has already been demonstrated at facilities cleaning iron and steel with sulfuric acid. 9207 companies are reported to use sulfuric and hydrochloric acid in the USA. The USEPA TRI statistics of acid not recycled in the US is 2.4 x 10{sup 9} lbs (net) for Hydrochloric Acid and 2.0 x 10{sup 9} lbs (net) for Sulfuric Acid. The energy cost of not reclaiming acid is 10.7 x 10{sup 6} BTU/ton for Hydrochloric Acid and 21.6 x 10{sup 6} BTU/Ton for Sulfuric Acid. This means that there is a very large market for the application of the Pickliq{reg_sign} Process and the widespread use of the process will bring significant world wide savings of energy to the environment.

Olsen, D.R.

1997-07-13T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

10 CFR 830 Major Modification Determination for Advanced Test Reactor RDAS and LPCIS Replacement  

SciTech Connect (OSTI)

The replacement of the ATR Control Complex's obsolete computer based Reactor Data Acquisition System (RDAS) and its safety-related Lobe Power Calculation and Indication System (LPCIS) software application is vitally important to ensure the ATR remains available to support this national mission. The RDAS supports safe operation of the reactor by providing 'real-time' plant status information (indications and alarms) for use by the reactor operators via the Console Display System (CDS). The RDAS is a computer support system that acquires analog and digital information from various reactor and reactor support systems. The RDAS information is used to display quadrant and lobe powers via a display interface more user friendly than that provided by the recorders and the Control Room upright panels. RDAS provides input to the Nuclear Engineering ATR Surveillance Data System (ASUDAS) for fuel burn-up analysis and the production of cycle data for experiment sponsors and the generation of the Core Safety Assurance Package (CSAP). RDAS also archives and provides for retrieval of historical plant data which may be used for event reconstruction, data analysis, training and safety analysis. The RDAS, LPCIS and ASUDAS need to be replaced with state-of-the-art technology in order to eliminate problems of aged computer systems, and difficulty in obtaining software upgrades, spare parts, and technical support. The major modification criteria evaluation of the project design did not lead to the conclusion that the project is a major modification. The negative major modification determination is driven by the fact that the project requires a one-for-one equivalent replacement of existing systems that protects and maintains functional and operational requirements as credited in the safety basis.

David E. Korns

2012-05-01T23:59:59.000Z

382

Categorical Exclusion Determination Form Program or Field Office: Advanced Research Projects Ag  

Broader source: Energy.gov (indexed) [DOE]

Project T Project T itle: (02 06- 1565) Columbia - Biofue ls from C02 using Amm onia-Oxid izing Bacte ria in a Reve rse Microbi a l Fue l Cell L ocati on: New Y ork Pr oposed Action or Proj ect Description: American Recovery and Reinvestment Act: D Funding will support in-lab R&D activities involving liquid biofuel production from biological-based non-photosynthetic systems. Proposed work consists of (1) initial testing and genetic modification of ammonia-oxidizing and iron-oxidizing bacteria used to produce liquid biofuel and (2) development and optimization of a reverse microbial fuel cel l. All proposed work will take place on the Columbia University campus in New York, NY. Categorical Exciusi on(s) Applied: x - 83.6 Siting/construction/operation/decommissioning of facilities for bench-scale research, conventional laboratory operations, small-scale research and developme

383

Categorical Exclusion Determination Form Program ofField Office: Sandia Site Office  

Broader source: Energy.gov (indexed) [DOE]

Drilling Research Intermediate Level System (DRILS) Project Activities (SNLINM and Offsite) Drilling Research Intermediate Level System (DRILS) Project Activities (SNLINM and Offsite) Location: Sandia National Laboratories· New Mexico Proposed Action or Project Description: American RecovelY and Reinvestment Act: r Sandia National LaboratoriesfNew Mexico (SNLfNM) proposes to perform research, development, and testing for advanced mechanical rock penetration technologies. Facility Operations DBl.1 - Rate increases < inflation (not power marketing) o B 1.2 - Training exercises and simulation o B 1.3 - Routine maintenance and custodial services o B 1.4 Air conditioning installation for existing equipment DB 1.5 - Cooling water system improvements in existing structures o Bl.6 Installation ofrunoffi'spiII control retention tanks and basins

384

Hanna, Wyoming underground coal gasification data base. Volume 4. Hanna II, Phases II and III field test research report  

SciTech Connect (OSTI)

This report is part of a seven-volume series on the Hanna, Wyoming, underground coal gasification field tests. Volume 1 is a summary of the project and each of Volumes 2 through 6 describes a particular test. Volume 7 is a compilation of all the data for the tests in Volumes 2 through 6. Hanna II, Phases II and III, were conducted during the winter of 1975 and the summer of 1976. The two phases refer to linking and gasification operations conducted between two adjacent well pairs as shown in Figure 1 with Phase II denoting operations between Wells 5 and 6 and Phase III operations between Wells 7 and 8. All of the other wells shown were instrumentation wells. Wells 7 and 8 were linked in November and December 1975. This report covers: (1) specific site selection and characteristics; (2) test objectives; (3) facilities description; (4) pre-operation tests; (5) test operations summary; and (6) post-test activity. 16 refs., 21 figs., 17 tabs.

Bartke, T.C.; Fischer, D.D.; King, S.B.; Boyd, R.M.; Humphrey, A.E.

1985-08-01T23:59:59.000Z

385

LoanSTAR Monitoring and Analysis Program: Presentation Summary of the State Capitol Complex Building Operation and Maintenance Field Test  

E-Print Network [OSTI]

requests, only 58% to 95% of AHUs identified in earlier report were shut off S. F. Austin Whole Building Electricity & Chilled Water Consumption Over 600 kW reduction when AHUs and lights turned off L.B. Johnson Whole Building Electricity & Chilled Water...LoanSTAR Monitoring and Analysis Program Presentation Summary of the State Capitol Complex Building Operation and Maintenance Field Test Presented to the State Purchasing and General Services Commission By the Monitoring Analysis Task E Dr. W. D...

Turner, W. D.; Houcek, J. K.; Liu, M.; Claridge, D. E.

1993-01-01T23:59:59.000Z

386

Field Test Results of Using a Nacelle-Mounted Lidar for Improving Wind Energy Capture by Reducing Yaw Misalignment (Presentation)  

SciTech Connect (OSTI)

Presented at the Nordic Wind Power Conference on November 5, 2014. This presentation describes field-test campaigns performed at the National Wind Technology Center in which lidar technology was used to improve the yaw alignment of the Controls Advanced Research Turbine (CART) 2 and CART3 wind turbines. The campaigns demonstrated that whether by learning a correction function to the nacelle vane, or by controlling yaw directly with the lidar signal, a significant improvement in power capture was demonstrated.

Fleming, P.; Scholbrock, A.; Wright, A.

2014-11-01T23:59:59.000Z

387

Test Results of HD2, A High Field Nb3Sn Dipole with A 36 MM Bore  

SciTech Connect (OSTI)

The Superconducting Magnet Program at Lawrence Berkeley National Laboratory (LBNL) has developed the 1 m long Nb{sub 3}Sn dipole magnet HD2. With tilted (flared) ends to avoid obstructing a 36 mm clear bore, HD2 represents a step towards the use of block-type coils in high-field accelerator magnets. The coil design has been optimized to minimize geometric harmonics and reduce the conductor peak field in the end region, resulting in an expected short sample dipole field of 15 T. The support structure is composed by an external aluminum shell pre-tensioned with pressurized bladders and interference keys, and by two stainless steel end plates compressing the coil ends through four aluminum axial rods. We report on magnet design, assembly, and test results, including training performance, quench locations, and strain gauge measurements.

Ferracin, Paolo

2008-05-19T23:59:59.000Z

388

Validation of a black-box heat pump simulation model by means of field test results from five installations  

Science Journals Connector (OSTI)

Abstract In the residential sector, heat pumps are applied for domestic hot water and space heating. Simulations are widely used for general research in the field of heat pumps and to some extend to plan such installations. The advantages are low expenditure of time and costs compared to laboratory or field tests. Validation of simulation models is mandatory to guarantee a sufficient quality. In the presented paper, the field monitoring results of five ground-source installations are utilised for the validation of a black-box heat pump model. The model is similar to TRNSYS Type 201, but implemented in IDA ICE and then modified to handle the difficulties caused by non-standard mass flow and rampant polynomials. As overall result, deviations between 1% and 32% regarding modelled and measured efficiency are seen on monthly basis. The overall result appears as convincing, taking into account typical inaccuracies of laboratory and field tests as well as tolerances during heat pump production. As a side effect, the influence of standby consumption was quantified. For the five presented installations, standby amounts to fractions between 2 and 5% of the annual electricity consumption of the heat pump units.

Jrn Ruschenburg; Tomislav ?uti?; Sebastian Herkel

2014-01-01T23:59:59.000Z

389

Determination of the fracture parameters associated with mixed mode displacement fields and applications of high density geometric moire  

E-Print Network [OSTI]

conducted on both PMMA and aluminum. The analyses of the finite element models indicated that the algorithm developed could be used to determine the opening and shear mode fracture parameters, without being affected by the rigid body rotation... 89 92 C PROCEDURE FOR REPRODUCING 80 LINE/MM GRATINGS . 95 D BONDING THE FILM GRATINGS TO THE TEST SPECIMEN 100 PMMA Aluminum 6061-T6511 E USE OF FILM GRATINGS IN GEOMETRIC MOIRE. . . F USING THE EPIX DIGITAL IMAGING SYSTEM, V2. 6 Set...

Kmiec, Kenneth James

1994-01-01T23:59:59.000Z

390

A Test to Verify the Speed Change of Light in the Gravitational Field of the Earth  

E-Print Network [OSTI]

Based on the Schwarzschild solution of the Einstein equation of gravitational field, it is proved that the speed of light speed would change and isotropy of light speed would be violated in gravitational field with spherical symmetry. On the surface of the earth, the speed of light vertical to the surface is 0.2m/s less than that parallel to the surface. It is suggested to use the method of the Michelson Morley interference to verify the change of light speed and the violation of isotropy in the gravitational field of the earth. In the proposed experiment, one arm of interferometer is vertical to the earth surface while another is parallel to the surface. When two arms are turned over 90 degree, the shift of about 0.07 interference stripe would be caused which can be observed directly. So this experiment can be considered as a new verification for general relativity in the gravitational field with spherical symmetry. If the experiment shows that gravitation would change the speed of light and violate the isotropy of light speed, the result would cause great effects on foundational physics, astrophysics and cosmolo

Mei Xiaochun

2006-12-03T23:59:59.000Z

391

Results from field tests of the one-dimensional Time-Encoded Imaging System.  

SciTech Connect (OSTI)

A series of field experiments were undertaken to evaluate the performance of the one dimensional time encoded imaging system. The significant detection of a Cf252 fission radiation source was demonstrated at a stand-off of 100 meters. Extrapolations to different quantities of plutonium equivalent at different distances are made. Hardware modifications to the system for follow on work are suggested.

Marleau, Peter; Brennan, James S.; Brubaker, Erik

2014-09-01T23:59:59.000Z

392

Determination of Optical-Field Ionization Dynamics in Plasmas through the Direct Measurement of the Optical Phase Change  

SciTech Connect (OSTI)

This is the final report of a three-year Laboratory Directed Research and Development (LDRD) Project at Los Alamos National Laboratory (LANL). The detailed dynamics of an atom in a strong laser field is rich in both interesting physics and potential applications. The goal of this project was to develop a technique for characterizing high-field laser-plasma interactions with femtosecond resolution based on the direct measurement of the phase change of an optical pulse. The authors developed the technique of Multi-pulse Interferometric Frequency Resolved Optical Gating (MI-FROG), which recovers (to all orders) the phase difference between pumped and unpumped probe pulses, enabling the determination of sub-pulsewidth time-resolved phase and frequency shifts impressed by a pump pulse on a weak probe pulse. Using MI-FROG, the authors obtained the first quantitative measurements of high-field ionization rates in noble gases and diatomic molecules. They obtained agreement between the measured ionization rates an d those calculated for the noble gases and diatomic nitrogen and hydrogen using a one-dimensional fluid model and rates derived from tunneling theory. However, much higher rates are measured for diatomic oxygen than predicted by tunneling theory calculations.

Taylor, A.J.; Omenetto, G.; Rodriguez, G.; Siders, C.W.; Siders, J.L.W.; Downer, C.

1999-07-16T23:59:59.000Z

393

The role of combustion diagnostics in coal quality impact and NO{sub x} emissions field test programs  

SciTech Connect (OSTI)

Many utilities are examining low sulfur coal or coal blending options to comply with the Clean Air Act Amendment SO{sub 2} emission limits. Test burns have been conducted with the more promising candidate coals to characterize the potential impact of a change in coal quality on boiler operation and performance. Utilities are also under considerable pressure to evaluate NO{sub x} control options and develop a compliance plan to meet strict NO{sub x} regulations, particularly in high population density metropolitan areas on the Eastern seaboard. Field test programs have been conducted to characterize baseline NO{sub x} emissions, evaluate the NO{sub x} reduction potential of combustion modifications, and assess the potential of combustion tuning as an alternative to burner replacement. Coal quality impacts (slagging, fouling, heat absorption, ash removal) and NO{sub x} emissions are both strongly dependent upon the coal combustion process and site-specific boiler firing practices. Non-uniform combustion in the burner region can result in adverse ash deposition characteristics, carbon carryover problems, high furnace exit gas temperatures, and NO{sub x}emission characteristics that are not representative of the coal or the combustion equipment. Advanced combustion diagnostic test procedures have been developed to evaluate and improve burner zone combustion uniformity, even in cases where the coal flow to the individual burners may be non-uniform. The paper outlines a very practical solving approach to identifying combustion related problems that affect ash deposition and NO{sub x} emissions. The benefits of using advanced diagnostic instrumentation to identify problems and tune combustion conditions is illustrated using test data from recent quality field test programs.

Thompson, R.E. [Fossil Energy Research Corp., Laguna Hills, CA (United States); Dyas, B. [New England Power Company, Westborough, MA (United States)

1995-03-01T23:59:59.000Z

394

ARM - Field Campaign - Warm-Season Data Assimilation and ISS Test  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

govCampaignsWarm-Season Data Assimilation and ISS Test govCampaignsWarm-Season Data Assimilation and ISS Test Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : Warm-Season Data Assimilation and ISS Test 1993.06.01 - 1993.06.30 Lead Scientist : Dave Parsons Data Availability Complete output from a 10-day simulation using a high resolution mesoscale model is available at 1-hr intervals. Verification of June 1993 IOP Assimilation Dataset and its use in Driving a Single-Column CCM3 Model. Update in May 2006 from Ric Cederwall: We were expecting 4-D variational analysis results for the IOP from Jimy Dudhia's 4DVAR model (a version of MM5), but it never happened. I don't expect that we will get the dataset. For data sets, see below. Summary Special rawinsonde soundings and profiler measurements were taken over a

395

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect (OSTI)

With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S. Department of Energy is funding projects that could offer power plant operators better ways to reduce these emissions at much lower costs. Mercury is known to have toxic effects on the nervous system of humans and wildlife. Although it exists only in trace amounts in coal, mercury is released when coal burns and can accumulate on land and in water. In water, bacteria transform the metal into methylmercury, the most hazardous form of the metal. Methylmercury can collect in fish and marine mammals in concentrations hundreds of thousands times higher than the levels in surrounding waters. One of the goals of DOE is to develop technologies by 2005 that will be capable of cutting mercury emissions 50 to 70 percent at well under one-half of today's costs. ADA Environmental Solutions (ADA-ES) is managing a project to test mercury control technologies at full scale at four different power plants from 2000--2003. The ADA-ES project is focused on those power plants that are not equipped with wet flue gas desulfurization systems. ADA-ES has developed a portable system that will be tested at four different utility power plants. Each of the plants is equipped with either electrostatic precipitators or fabric filters to remove solid particles from the plant's flue gas. ADA-ES's technology will inject a dry sorbent, such as activated carbon, which removes the mercury and makes it more susceptible to capture by the particulate control devices. A fine water mist may be sprayed into the flue gas to cool its temperature to the range where the dry sorbent is most effective. PG&E National Energy Group is providing two test sites that fire bituminous coals and both are equipped with electrostatic precipitators and carbon/ash separation systems. Wisconsin Electric Power Company is providing a third test site that burns Powder River Basin (PRB) coal and has an electrostatic precipitator for particulate control. Alabama Power Company will host a fourth test at its Plant Gaston, which is equipped with a hot-side electrostatic precipitator and a downstream fabric filter.

Michael D. Durham

2003-05-01T23:59:59.000Z

396

Field Evaluation of the InBios Chagas Detect Plus Rapid Test in Serum and Whole-Blood Specimens in Bolivia  

Science Journals Connector (OSTI)

...of the InBios Chagas Detect Plus Rapid Test in Serum and Whole-Blood Specimens in...hemagglutination assay, immunofluorescent-antibody test, and enzyme-linked immunosorbent assay...to those of conventional serology. The test is reliable for field surveys, requires...

Vishal Shah; Lisbeth Ferrufino; Robert H. Gilman; Margot Ramirez; Eliana Saenza; Edith Malaga; Gerardo Sanchez; Emi E. Okamoto; Jacqueline E. Sherbuck; Eva H. Clark; Gerson Galdos-Cardenas; Ricardo Bozo; Jorge Luis Flores-Franco; Rony Colanzi; Manuela Verastegui; Caryn Bern

2014-10-01T23:59:59.000Z

397

Development, Demonstration, and Field Testing of Enterprise-Wide Distributed Generation Energy Management System: Final Report  

SciTech Connect (OSTI)

This report details progress on subcontract NAD-1-30605-1 between the National Renewable Energy Laboratory and RealEnergy (RE), the purpose of which is to describe RE's approach to the challenges it faces in the implementation of a nationwide fleet of clean cogeneration systems to serve contemporary energy markets. The Phase 2 report covers: utility tariff risk and its impact on market development; the effect on incentives on distributed energy markets; the regulatory effectiveness of interconnection in California; a survey of practical field interconnection issues; trend analysis for on-site generation; performance of dispatch systems; and information design hierarchy for combined heat and power.

Greenberg, S.; Cooley, C.

2005-01-01T23:59:59.000Z

398

Discussion of comparison study of hydraulic fracturing models -- Test case: GRI Staged Field Experiment No. 3  

SciTech Connect (OSTI)

This paper provides comments to a companion journal paper on predictive modeling of hydraulic fracturing patterns (N.R. Warpinski et. al., 1994). The former paper was designed to compare various modeling methods to demonstrate the most accurate methods under various geologic constraints. The comments of this paper are centered around potential deficiencies in the former authors paper which include: limited actual comparisons offered between models, the issues of matching predictive data with that from related field operations was lacking or undocumented, and the relevance/impact of accurate modeling on the overall hydraulic fracturing cost and production.

Cleary, M.P.

1994-02-01T23:59:59.000Z

399

Testing non-linear force-free coronal magnetic field extrapolations with the Titov-Demoulin equilibrium  

E-Print Network [OSTI]

CONTEXT: As the coronal magnetic field can usually not be measured directly, it has to be extrapolated from photospheric measurements into the corona. AIMS: We test the quality of a non-linear force-free coronal magnetic field extrapolation code with the help of a known analytical solution. METHODS: The non-linear force-free equations are numerically solved with the help of an optimization principle. The method minimizes an integral over the force-free and solenoidal condition. As boundary condition we use either the magnetic field components on all six sides of the computational box in Case I or only on the bottom boundary in Case II. We check the quality of the reconstruction by computing how well force-freeness and divergence-freeness are fulfilled and by comparing the numerical solution with the analytical solution. The comparison is done with magnetic field line plots and several quantitative measures, like the vector correlation, Cauchy Schwarz, normalized vector error, mean vector error and magnetic energy. RESULTS: For Case I the reconstructed magnetic field shows good agreement with the original magnetic field topology, whereas in Case II there are considerable deviations from the exact solution. This is corroborated by the quantitative measures, which are significantly better for Case I. CONCLUSIONS: Despite the strong nonlinearity of the considered force-free equilibrium, the optimization method of extrapolation is able to reconstruct it; however, the quality of reconstruction depends significantly on the consistency of the input data, which is given only if the known solution is provided also at the lateral and top boundaries, and on the presence or absence of flux concentrations near the boundaries of the magnetogram.

Thomas Wiegelmann; Bernd Inhester; Bernhard Kliem; Gherardo Valori; Thomas Neukirch

2006-12-21T23:59:59.000Z

400

Macroscopic and Microscopic Paradigms for the Torsion Field: from the Test-Particle Motion to a Lorentz Gauge Theory  

E-Print Network [OSTI]

Torsion represents the most natural extension of General Relativity and it attracted interest over the years in view of its link with fundamental properties of particle motion. The bulk of the approaches concerning the torsion dynamics focus their attention on their geometrical nature and they are naturally led to formulate a non-propagating theory. Here we review two different paradigms to describe the role of the torsion field, as far as a propagating feature of the resulting dynamics is concerned. However, these two proposals deal with different pictures, i.e., a macroscopic approach, based on the construction of suitable potentials for the torsion field, and a microscopic approach, which relies on the identification of torsion with the gauge field associated with the local Lorentz symmetry. We analyze in some detail both points of view and their implications on the coupling between torsion and matter will be investigated. In particular, in the macroscopic case, we analyze the test-particle motion to fix the physical trajectory, while, in the microscopic approach, a natural coupling between torsion and the spin momentum of matter fields arises.

Nakia Carlevaro; Orchidea Maria Lecian; Giovanni Montani

2007-12-07T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Field testing of component-level model-based fault detection methods for mixing boxes and VAV fan systems  

SciTech Connect (OSTI)

An automated fault detection and diagnosis tool for HVAC systems is being developed, based on an integrated, life-cycle, approach to commissioning and performance monitoring. The tool uses component-level HVAC equipment models implemented in the SPARK equation-based simulation environment. The models are configured using design information and component manufacturers' data and then fine-tuned to match the actual performance of the equipment by using data measured during functional tests of the sort using in commissioning. This paper presents the results of field tests of mixing box and VAV fan system models in an experimental facility and a commercial office building. The models were found to be capable of representing the performance of correctly operating mixing box and VAV fan systems and detecting several types of incorrect operation.

Xu, Peng; Haves, Philip

2002-05-16T23:59:59.000Z

402

Laser spectroscopy of hyperfine structure in highly-charged ions: a test of QED at high fields  

E-Print Network [OSTI]

An overview is presented of laser spectroscopy experiments with cold, trapped, highly-charged ions, which will be performed at the HITRAP facility at GSI in Darmstadt (Germany). These high-resolution measurements of ground state hyperfine splittings will be three orders of magnitude more precise than previous measurements. Moreover, from a comparison of measurements of the hyperfine splittings in hydrogen- and lithium-like ions of the same isotope, QED effects at high electromagnetic fields can be determined within a few percent. Several candidate ions suited for these laser spectroscopy studies are presented.

D. F. A. Winters; M. Vogel; D. M. Segal; R. C. Thompson; W. Noertershaeuser

2007-04-26T23:59:59.000Z

403

SOLAR WAVE-FIELD SIMULATION FOR TESTING PROSPECTS OF HELIOSEISMIC MEASUREMENTS OF DEEP MERIDIONAL FLOWS  

SciTech Connect (OSTI)

The meridional flow in the Sun is an axisymmetric flow that is generally directed poleward at the surface, and is presumed to be of fundamental importance in the generation and transport of magnetic fields. Its true shape and strength, however, are debated. We present a numerical simulation of helioseismic wave propagation in the whole solar interior in the presence of a prescribed, stationary, single-cell, deep meridional circulation serving as synthetic data for helioseismic measurement techniques. A deep-focusing time-distance helioseismology technique is applied to the synthetic data, showing that it can in fact be used to measure the effects of the meridional flow very deep in the solar convection zone. It is shown that the ray approximation that is commonly used for interpretation of helioseismology measurements remains a reasonable approximation even for very long distances between 12 Degree-Sign and 42 Degree-Sign corresponding to depths between 52 and 195 Mm. From the measurement noise, we extrapolate that time-resolved observations on the order of a full solar cycle may be needed to probe the flow all the way to the base of the convection zone.

Hartlep, T.; Zhao, J.; Kosovichev, A. G. [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA (United States)] [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA (United States); Mansour, N. N. [NASA Ames Research Center, Moffett Field, CA (United States)] [NASA Ames Research Center, Moffett Field, CA (United States)

2013-01-10T23:59:59.000Z

404

Standard practice for in situ examination of ferromagnetic Heat-Exchanger tubes using remote field testing  

E-Print Network [OSTI]

1.1 This practice describes procedures to be followed during remote field examination of installed ferromagnetic heat-exchanger tubing for baseline and service-induced discontinuities. 1.2 This practice is intended for use on ferromagnetic tubes with outside diameters from 0.500 to 2.000 in. [12.70 to 50.80 mm], with wall thicknesses in the range from 0.028 to 0.134 in. [0.71 to 3.40 mm]. 1.3 This practice does not establish tube acceptance criteria; the tube acceptance criteria must be specified by the using parties. 1.4 UnitsThe values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establ...

American Society for Testing and Materials. Philadelphia

2010-01-01T23:59:59.000Z

405

Field Test Results from Lidar Measured Yaw Control for Improved Yaw Alignment with the NREL Controls Advanced Research Turbine: Preprint  

SciTech Connect (OSTI)

This paper describes field tests of a light detection and ranging (lidar) device placed forward looking on the nacelle of a wind turbine and used as a wind direction measurement to directly control the yaw position of a wind turbine. Conventionally, a wind turbine controls its yaw direction using a nacelle-mounted wind vane. If there is a bias in the measurement from the nacelle-mounted wind vane, a reduction in power production will be observed. This bias could be caused by a number of issues such as: poor calibration, electromagnetic interference, rotor wake, or other effects. With a lidar mounted on the nacelle, a measurement of the wind could be made upstream of the wind turbine where the wind is not being influenced by the rotor's wake or induction zone. Field tests were conducted with the lidar measured yaw system and the nacelle wind vane measured yaw system. Results show that a lidar can be used to effectively measure the yaw error of the wind turbine, and for this experiment, they also showed an improvement in power capture because of reduced yaw misalignment when compared to the nacelle wind vane measured yaw system.

Scholbrock, A.; Fleming, P.; Wright, A.; Slinger, C.; Medley, J.; Harris, M.

2014-12-01T23:59:59.000Z

406

Predicting the natural state of fractured carbonate reservoirs: An Andector Field, West Texas test of a 3-D RTM simulator  

SciTech Connect (OSTI)

The power of the reaction, transport, mechanical (RTM) modeling approach is that it directly uses the laws of geochemistry and geophysics to extrapolate fracture and other characteristics from the borehole or surface to the reservoir interior. The objectives of this facet of the project were to refine and test the viability of the basin/reservoir forward modeling approach to address fractured reservoir in E and P problems. The study attempts to resolve the following issues: role of fracturing and timing on present day location and characteristics; clarifying the roles and interplay of flexure dynamics, changing rock rheological properties, fluid pressuring and tectonic/thermal histories on present day reservoir location and characteristics; and test the integrated RTM modeling/geological data approach on a carbonate reservoir. Sedimentary, thermal and tectonic data from Andector Field, West Texas, were used as input to the RTM basin/reservoir simulator to predict its preproduction state. The results were compared with data from producing reservoirs to test the RTM modeling approach. The effects of production on the state of the field are discussed in a companion report. The authors draw the following conclusions: RTM modeling is an important new tool in fractured reservoir E and P analysis; the strong coupling of RTM processes and the geometric and tensorial complexity of fluid flow and stresses require the type of fully coupled, 3-D RTM model for fracture analysis as pioneered in this project; flexure analysis cannot predict key aspects of fractured reservoir location and characteristics; fracture history over the lifetime of a basin is required to understand the timing of petroleum expulsion and migration and the retention properties of putative reservoirs.

Tuncay, K.; Romer, S.; Ortoleva, P. [Indiana Univ., Bloomington, IN (United States); Hoak, T. [Kestrel Geoscience, Littleton, CO (United States); Sundberg, K. [Phillips Petroleum Co., Bartlesville, OK (United States)

1998-12-31T23:59:59.000Z

407

An ultra-capacitor for frequency stability enhancement in small-isolated power systems: Models, simulation and field tests  

Science Journals Connector (OSTI)

Abstract The most relevant issue in operation of isolated power systems is frequency stability. Frequency stability is concerned with the ability of generators to supply the loads at an acceptable frequency after a disturbance. Frequency stability is governed by the kinetic energy stored in the generator-prime mover rotating masses and the prime mover frequency primary regulation. If frequency excursions are not within +/?2.5Hz range, cascade tripping of the remaining generators can occur because of generator over/under frequency protections tripping. Energy storage systems can contribute to frequency stability enhancement if their discharging is governed by a frequency controller. Endesa is leading a research project on testing the state of the art of energy storage systems for several applications (peak-shaving, voltage control, frequency control) in several isolated power systems of the Canary Islands. Several applications are being investigated. One of them consists on the application of a 4MW5s ultracapacitor (UC) for frequency stability enhancement of the La Palma power system. This paper reports the dynamic model developed for time domain simulation and controller design of frequency stability, and field tests undertaken to validate models and the controller settings. A simple but still accurate model is presented. The proposed model takes into account the UCs state of charge (SoC) and it represents the dynamics of the power electronics by means of a non-linear first-order model. The frequency control consists of droop control and inertia emulation. Ramp rate limits, power limits and SoC are also taken into account in the frequency control. In comparison with the recorded field tests, the proposed model is able to accurately represent the response of the UC for the purpose of frequency stability analysis.

I. Egido; L. Sigrist; E. Lobato; L. Rouco; A. Barrado

2015-01-01T23:59:59.000Z

408

NREL Launches Collaborative Resource for Field Test Best Practices (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Dynamic portal documents and shares state-of-the-art Dynamic portal documents and shares state-of-the-art residential field test tools and techniques. Field testing is a science and an art-a tricky process that develops through a lot of trial and error. Researchers in the Advanced Residential Buildings group at the National Renewable Energy Labora- tory (NREL) regularly conduct field experiments and long-term monitoring in occupied and unoc- cupied houses throughout the United States. The goal is to capture real-world performance of energy- efficient systems, in support of the U.S. Department of Energy's Build- ing America program. In addition to the technical challenges of making accurate field measurements, NREL researchers realized another problem: the vast body of field test know-how based on years of collective experience is currently scattered throughout the

409

Unmanned airborne vehicle (UAV): Flight testing and evaluation of two-channel E-field very low frequency (VLF) instrument  

SciTech Connect (OSTI)

Using VLF frequencies, transmitted by the Navy`s network, for airborne remote sensing of the earth`s electrical, magnetic characteristics was first considered by the United States Geological Survey (USGS) around the mid 1970s. The first VLF system was designed and developed by the USGS for installation and operation on a single engine, fixed wing aircraft used by the Branch of Geophysics for geophysical surveying. The system consisted of five channels. Two E-field channels with sensors consisting of a fixed vertical loaded dipole antenna with pre-amp mounted on top of the fuselage and a gyro stabilized horizontal loaded dipole antenna with pre-amp mounted on a tail boom. The three channel magnetic sensor consisted of three orthogonal coils mounted on the same gyro stabilized platform as the horizontal E-field antenna. The main features of the VLF receiver were: narrow band-width frequency selection using crystal filters, phase shifters for zeroing out system phase variances, phase-lock loops for generating real and quadrature gates, and synchronous detectors for generating real and quadrature outputs. In the mid 1990s the Branch of Geophysics designed and developed a two-channel E-field ground portable VLF system. The system was built using state-of-the-art circuit components and new concepts in circuit architecture. Small size, light weight, low power, durability, and reliability were key considerations in the design of the instrument. The primary purpose of the instrument was for collecting VLF data during ground surveys over small grid areas. Later the system was modified for installation on a Unmanned Airborne Vehicle (UAV). A series of three field trips were made to Easton, Maryland for testing and evaluating the system performance.

NONE

1998-12-01T23:59:59.000Z

410

Borehole closure and test zone volume determination program for brine-permeability test results within the Waste Isolation Pilot Plant underground facility  

SciTech Connect (OSTI)

Until recently, hydrologic characterization in closed sections of boreholes at the Waste Isolation Pilot Plant (WIPP) has relied on measurements of pressure and temperature to establish the permeability of the host geological formations. There were no provisions for monitoring tool compliance and salt creep resulting from borehole closure. The new permeability test tool used to characterize the WIPP underground facility has been equipped with a series of sensors to measure the movement of the tool with respect to the borehole and borehole wall movement. A FORTRAN program can interpret the output data from each test and calculate the change in borehole radius, test zone length, and test zone volume. These values provide a correlation of fluid compressibility and tool compliance with the permeability results derived from the test data. 4 figs., 3 tabs.

Jensen, A.L.

1990-05-01T23:59:59.000Z

411

Solar powered induction motor-driven water pump operating on a desert well, simulation and field tests  

Science Journals Connector (OSTI)

A photovoltaic-powered water pumping system, employing an induction motor pump, capable of supplying a daily average of 50m3 at 37-m head has been developed. The system was installed on a desert well in Jordan, where: the average solar radiation amount to 5.5kWh/m3/day, to provide the Bedouins living in the well area with drinking water. A mathematical model to enable testing the system performance by computer simulation was developed. This model allows the representation of motor torque in function of speed (and slip) at different supply frequencies, as well as the flow rate and efficiency of the system in function of supply frequency and pumping head. Prior to its installation on the desert well, the system performance, in accordance with frequency and head, was thoroughly tested in the laboratory. As illustrated in this paper, simulation and laboratory testing results are well matched. At constant pumping head, the flow rate is proportional to the supply frequency of the motor. At constant flow rate, the pumping head is proportional to the supply frequency squared only in the range below the peak efficiency of the pump. For higher flow rate values, a special algorithm based on the experimental results could be developed. Higher system efficiency is achievable at higher frequency. It is advisable to operate the motor pump at the nominal frequency, flow rate and head corresponding to maximum efficiency. Long-term field testing of the system shows that it is reliable and has an overall efficiency exceeding 3%, which is comparable to the highest efficiencies reported elsewhere for solar powered pumps.

Abdel-Karim Daud; Marwan M. Mahmoud

2005-01-01T23:59:59.000Z

412

Reseach and development of energy-efficient appliance motor-compressors. Final report. Volume III: development and field test plan  

SciTech Connect (OSTI)

By means of a program of theoretical analysis, development, and testing of samples, it was found that significant improvements could be made in the energy efficiency ratio (EER) of hermetic motor-compressor assemblies. The high efficiency designs resulting from the development program are believed to be suitable for quantity production without excessive facilities cost, to have acceptable levels of performance and reliability, and to be producible at costs which will make them commercially attractive. The steps involved in the development of the improved compressor design are described in detail. The major purpose of Phase II of the project is to verify the reliability of the high-efficiency designs by means of a field demonstration program.

Nelson, R.T.; MacCarthy, P.W.

1980-09-01T23:59:59.000Z

413

Field Testing of Suction Caissons at Bothkennar and Luce Bay G.T. Houlsby, R.B. Kelly, J. Huxtable and B.W. Byrne  

E-Print Network [OSTI]

Field Testing of Suction Caissons at Bothkennar and Luce Bay by G.T. Houlsby, R.B. Kelly, J.T. Houlsby, R.B. Kelly, J. Huxtable and B.W. Byrne This report consists of three papers that have resulted.T., Kelly, R.B., Huxtable, J. and Byrne, B.W. Abstract: A programme of testing of caisson foundations

Byrne, Byron

414

Program for field validation of the Synthetic Aperture Focusing Technique for Ultrasonic Testing (SAFT UT). Final report  

SciTech Connect (OSTI)

This final report describes work performed by Southwest Research Institute for the Nuclear Regulatory Commission (NRC) in fulfillment of NRC Contract No. NRC-04-77-145: ''Program for Field Validation of the Synthetic Aperture Focusing Technique for Ultrasonic Testing (SAFT UT).'' The purpose of the project was to validate the effectiveness of SAFT UT as a nondestructive examination technique for nuclear power and other related industries. SAFT UT is an ultrasonic imaging method for accurate measurement of the spatial location and extent of acoustically reflective surfaces (flaws) contained in objects such as structural components and weldments in nuclear power reactor systems. The increased measurement accuracy offered by SAFT, when compared with that provided by measurement methods now in use, will improve the reliability of flaw severity assessment with resultant safety and economic benefits to the nuclear power industry. This report presents a comprehensive discussion of the work accomplished in evaluating the performance capabilities of the developed SAFT UT inspection system. Inspection results obtained using both 0-degree longitudinal and angle-beam operating modes are presented. These results include laboratory and nuclear power plant field site examinations on a variety of defect types contained within carbon and stainless steel flat plate and cylindrical test specimens or components. The SAFT UT processed data flaw images are evaluated by comparing them to results obtained from destructive sectioning or by using flaw fabrication data which predicted actual flaw depth, orientation and size. On the basis of these evaluations, conclusions are presented which summarize the performance capabilities of the SAFT UT inspection technique. 116 figs.

Hamlin, D.R.

1985-11-01T23:59:59.000Z

415

Crack growth rates and metallographic examinations of Alloy 600 and Alloy 82/182 from field components and laboratory materials tested in PWR environments.  

SciTech Connect (OSTI)

In light water reactors, components made of nickel-base alloys are susceptible to environmentally assisted cracking. This report summarizes the crack growth rate results and related metallography for field and laboratory-procured Alloy 600 and its weld alloys tested in pressurized water reactor (PWR) environments. The report also presents crack growth rate (CGR) results for a shielded-metal-arc weld of Alloy 182 in a simulated PWR environment as a function of temperature between 290 C and 350 C. These data were used to determine the activation energy for crack growth in Alloy 182 welds. The tests were performed by measuring the changes in the stress corrosion CGR as the temperatures were varied during the test. The difference in electrochemical potential between the specimen and the Ni/NiO line was maintained constant at each temperature by adjusting the hydrogen overpressure on the water supply tank. The CGR data as a function of temperature yielded activation energies of 252 kJ/mol for a double-J weld and 189 kJ/mol for a deep-groove weld. These values are in good agreement with the data reported in the literature. The data reported here and those in the literature suggest that the average activation energy for Alloy 182 welds is on the order of 220-230 kJ/mol, higher than the 130 kJ/mol commonly used for Alloy 600. The consequences of using a larger value of activation energy for SCC CGR data analysis are discussed.

Alexandreanu, B.; Chopra, O. K.; Shack, W. J.

2008-05-05T23:59:59.000Z

416

Controls of coal fabric on coalbed gas production and compositional shift in both field production and canister desorption tests  

SciTech Connect (OSTI)

The production rates of coalbed gas wells commonly vary significantly, even in the same field with similar reservoir permeability and gas content. The compositional variation in produced gas is also not everywhere predictable, although in most fields produced gas becomes progressively enriched in CO, through the production life of a reservoir, such as parts of the San Juan basin. In contrast, it is generally observed that the ratio of CO{sub 2}:CH{sub 4} declines with time during field and laboratory desorption testing of coal cores. In this study, we investigate numerically the importance of coal fabric, namely cleat spacing and aperture width, on the performance of coalbed gas wells and gas compositional shifts during production. Because of the cubic relationship between fracture permeability and fracture aperture width (and thus fracture porosity) for a given cleat permeability, the production profile of coal seams varies depending on whether the permeability is distributed among closely spaced fractures (cleat) with narrower apertures or more widely spaced fractures (cleat) with wider apertures. There is a lower fracture porosity for coal with widely spaced fractures than for coal with closely spaced fractures. Therefore, the relative permeability to gas increases more rapidly for coals with more widely spaced cleats as less dewatering from fractures is required, assuming that the fractures are initially water saturated. The enrichment of CO{sub 2} in the production gas with time occurs because of the stronger adsorption of coals for CO{sub 2} than CH{sub 4}. However, during desorption of coal cores, CO{sub 2} desorbs more rapidly than methane because desorption rate is governed more by diffusion than by sorption affinity, and CO{sub 2} has much higher effective diffusivity in microporous coals than CH{sub 4}.

Cui, X.J.; Bustin, R.M. [University of British Columbia, Vancouver, BC (Canada)

2006-03-15T23:59:59.000Z

417

08/05/2006 12:16 AM3-D Computer-Automated Threshold Amsler Grid Test Page 1 of 8http://www-aig.jpl.nasa.gov/public/mls/home/wfink/3DVisualFieldTest.htm  

E-Print Network [OSTI]

08/05/2006 12:16 AM3-D Computer-Automated Threshold Amsler Grid Test Page 1 of 8http://www-aig.jpl.nasa.gov/public/mls/home: #12;08/05/2006 12:16 AM3-D Computer-Automated Threshold Amsler Grid Test Page 5 of 8http://www-aig.jpl.nasa.gov/public/mls/home/wfink/3DVisualFieldTest.htm Introduction The 3-D Computer-Automated Threshold Amsler Grid Test is a five

Arizona, University of

418

Pilot Phase of a Field Study to Determine Waste of Water and Energy in Residential Hot-Water Distribution Systems  

E-Print Network [OSTI]

understanding the waste of energy and water in residentialStudy to Determine Waste of Water and Energy in ResidentialStudy to Determine Waste of Water and Energy in Residential

Lutz, Jim

2012-01-01T23:59:59.000Z

419

A prototype with a 5-meter span, built in January 2013. Afterwards, the mechanical strength of the construction was determined by destructive testing.  

E-Print Network [OSTI]

of the construction was determined by destructive testing. With this smart and simple solution for connecting to underline their corporate image of transparency. In houses and public buildings it allows daylight in and almost invisible solution for connecting glass columns and beams, for which a patent is pending. Wider

Langendoen, Koen

420

Field test of two high-pressure, direct-contact downhole steam generators. Volume I. Air/diesel system  

SciTech Connect (OSTI)

As a part of the Project DEEP STEAM to develop technology to more efficiently utilize steam for the recovery of heavy oil from deep reservoirs, a field test of a downhole steam generator (DSG) was performed. The DSG burned No. 2 diesel fuel in air and was a direct-contact, high pressure device which mixed the steam with the combustion products and injected the resulting mixture directly into the oil reservoir. The objectives of the test program included demonstration of long-term operation of a DSG, development of operational methods, assessment of the effects of the steam/combustion gases on the reservoir and comparison of this air/diesel DSG with an adjacent oxygen/diesel direct contact generator. Downhole operation of the air/diesel DSG was started in June 1981 and was terminated in late February 1982. During this period two units were placed downhole with the first operating for about 20 days. It was removed, the support systems were slightly modified, and the second one was operated for 106 days. During this latter interval the generator operated for 70% of the time with surface air compressor problems the primary source of the down time. Thermal contact, as evidenced by a temperature increase in the production well casing gases, and an oil production increase were measured in one of the four wells in the air/diesel pattern. Reservoir scrubbing of carbon monoxide was observed, but no conclusive data on scrubbing of SO/sub x/ and NO/sub x/ were obtained. Corrosion of the DSG combustor walls and some other parts of the downhole package were noted. Metallurgical studies have been completed and recommendations made for other materials that are expected to better withstand the downhole combustion environment. 39 figures, 8 tables.

Marshall, B.W.

1983-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The field test and optimization of a solar assisted heat pump system for space heating in extremely cold area  

Science Journals Connector (OSTI)

Abstract As a kind of sustainable energy source, solar energy is becoming highly valued. Especially in extremely cold areas, the amount of energy consumed for space heating is huge, and the conventional coal heating has polluted the environment seriously, therefore solar heating is significant on both energy and environment conservation. In this study, a solar assisted heat pump (SAHP) system was investigated for space heating under extremely cold climatic condition. The system principle and operation modes was presented, and then the project profile and design procedure were introduced, and finally the system performance was evaluated by field test on typical winter days and modeling via TRNSYS simulation environment. The results show that the solar collector efficiency was 51%, and the solar fraction can reach 66% in December. Economic analysis was also performed and the heating expenses for the present SAHP system was 18RMB/m2. Finally, the temperatures of solar energy for both direct heating and storage and only for direct heating (T1A and T1B) were simulated and optimized, which have important significance on the operation time of different operation modes.

Huifang Liu; Yiqiang Jiang; Yang Yao

2014-01-01T23:59:59.000Z

422

Methodical improvements of standard laboratory tests for determining the sideeffects of agrochemicals on predatory mites (Acari: Phytoseiidae)  

Science Journals Connector (OSTI)

In the course of the alignment of national registration procedures with general EU guidelines, changes, improvements and validation of current test guidelines are advisable. The following is intended to contri...

Dr. F. Louis; Dr. A. Ufer

1995-10-01T23:59:59.000Z

423

High Temperature Expansion Due to Compression Test for the Determination of a Cladding Material Failure Criterion under RIA Loading Conditions  

SciTech Connect (OSTI)

This paper is mainly dedicated to the development of an out-of-pile test reproducing the thermo-mechanical loading conditions encountered during the first stage of a Reactivity Initiated Accidents (RIA) transient, dominated by Pellet Clad Mechanical Interaction (PCMI). In particular, the strain-controlled clad loading under high strain rate associated with temperatures up to 600 deg. C expected during the PCMI phase is simulated by an Expansion Due to Compression (EDC) test achievable at high temperature. The use of appropriate materials for the inner pellet made it possible to achieve the tests from 20 deg. C up to 900 deg. C. The interpretation of the test data is supported by Finite Element Analysis (FEA) including parameters tuned using an inverse method coupling FEA and tests results. A deformation model, identified upon the PROMETRA (Transient Mechanical Properties) experimental database and describing the anisotropic viscoplastic behavior of Cold-Worked Stress Relieved Zircaloy-4 cladding alloys under typical RIA loading conditions, is exploited. The combined analysis of experimental results and finite element simulations provides a deeper understanding of the deformation mode (near pure hoop tension) that arises during the tests. The failure mode appears to be representative of that obtained on tubes during the PCMI stage of RIA experiments. An appropriate device is currently developed in order to reach a bi-axiality of the loading path closer to that expected during the PCMI stage (between plane-strain and equal-biaxial tension). (authors)

Le Saux, M.; Poussard, C.; Averty, X.; Sainte Catherine, C.; Carassou, S. [CEA-Saclay, DEN/DMN/SEMI, 91191 Gif-Sur-Yvette (France); Besson, J. [Centre des Materiaux, Mines Paris, CNRS UMR 7633, BP 87, 91003 Evry (France)

2007-07-01T23:59:59.000Z

424

Laboratory and Field Testing of Commercially Available Detectors for the Identification of Chemicals of Interest in the Nuclear Fuel Cycle for the Detection of Undeclared Activities  

SciTech Connect (OSTI)

Traditionally, IAEA inspectors have focused on the detection of nuclear indicators as part of infield inspection activities. The ability to rapidly detect and identify chemical as well as nuclear signatures can increase the ability of IAEA inspectors to detect undeclared activities at a site. Identification of chemical indicators have been limited to use in the analysis of environmental samples. Although IAEA analytical laboratories are highly effective, environmental sample processing does not allow for immediate or real-time results to an IAEA inspector at a facility. During a complementary access inspection, under the Additional Protocol, the use of fieldable technologies that can quickly provide accurate information on chemicals that may be indicative of undeclared activities can increase the ability of IAEA to effectively and efficiently complete their mission. The Complementary Access Working Group (CAWG) is a multi-laboratory team with members from Brookhaven National Laboratory, Idaho National Laboratory, Los Alamos National Laboratory, and Sandia National Laboratory. The team identified chemicals at each stage of the nuclear fuel cycle that may provide IAEA inspectors with indications that proliferation activities may be occurring. The group eliminated all indicators related to equipment, technology and training, developing a list of by-products/effluents, non-nuclear materials, nuclear materials, and other observables. These proliferation indicators were prioritized based on detectability from a conduct of operations (CONOPS) perspective of a CA inspection (for example, whether an inspector actually can access the S&O or whether it is in process with no physical access), and the IAEAs interest in the detection technology in conjunction with radiation detectors. The list was consolidated to general categories (nuclear materials from a chemical detection technique, inorganic chemicals, organic chemicals, halogens, and miscellaneous materials). The team then identified commercial off the shelf (COTS) chemical detectors that may detect the chemicals of interest. Three chemical detectors were selected and tested both in laboratory settings and in field operations settings at Idaho National Laboratory. The instruments selected are: Thermo Scientific TruDefender FT (FTIR), Thermo Scientific FirstDefender RM (Raman), and Bruker Tracer III SD (XRF). Functional specifications, operability, and chemical detectability, selectivity, and limits of detection were determined. Results from the laboratory and field tests will be presented. This work is supported by the Next Generation Safeguards Initiative, Office of Nonproliferation and International Security, National Nuclear Security Administration.

Carla Miller; Mary Adamic; Stacey Barker; Barry Siskind; Joe Brady; Warren Stern; Heidi Smartt; Mike McDaniel; Mike Stern; Rollin Lakis

2014-07-01T23:59:59.000Z

425

Focal mechanism determination of induced microearthquakes in an oil field using full waveforms from shallow and deep seismic networks  

E-Print Network [OSTI]

A new, relatively high frequency, full waveform matching method was used to study the focal mechanisms of small, local earthquakes induced in an oil field, which are monitored by a sparse near-surface network and a deep ...

Li, Junlun

426

A model comparison initiative for a CO2 injection field test: An introduction to Sim-SEQ  

E-Print Network [OSTI]

in the water leg of a CO 2 -EOR field with a strong waterwater leg of an active CO 2 -EOR field with a strong waterthe presence of an active EOR operation nearby may also

Mukhopadhyay, S.

2013-01-01T23:59:59.000Z

427

A stochastic Monte Carlo computer simulation of the drop-weight test for the determination of nil-ductility transition temperature  

E-Print Network [OSTI]

on the surface of the specimen blank can produce heat affected zones that are tougher than the base metal, which could lead to artificially low predictions of NDIT [17[. In such m O zS O e O 0 LU 4 CR ki ?E O Z -I of 0 tiE I- O z 1 V gm 0) c e H N... aside, the manner in which test temperatures are chosen may contribute most to the variance and bias inherent in the drO-wweigh test method (ASTM E 208) for determining the nil-ductility transition temperature, NDTI; for ferritic steels...

Lambert, Michael Andrew

1990-01-01T23:59:59.000Z

428

New Method of Denitrification Analysis of Bradyrhizobium Field Isolates by Gas Chromatographic Determination of 15N-Labeled N2  

Science Journals Connector (OSTI)

...determined from nitrogen isotope paring...of the carrier gas on the sensitivity...Low-pressure solubility of gases in liquid water. Chem. Rev...Chromatography, Gas methods Culture...Nitrites metabolism Nitrogen Isotopes metabolism...

Reiko Sameshima-Saito; Kaori Chiba; Kiwamu Minamisawa

2004-05-01T23:59:59.000Z

429

Determining the effect of seawater on the interfacial shear strength of fiber reinforced epoxies using the single fiber fragmentation test  

E-Print Network [OSTI]

of fiber reinforced polymer composite materials. The single fiber fragmentation test (SFFT) and Kelly-Tyson shear lag analysis were used to evaluate the effect of seawater on the interfacial shear strength (IFSS) of carbon/epoxy and glass/epoxy composite...

Pratt, Barbara Ann

1996-01-01T23:59:59.000Z

430

Vacancy diffusion in colloidal crystals as determined by dynamical density-functional theory and the phase-field-crystal model  

E-Print Network [OSTI]

A two-dimensional crystal of repulsive dipolar particles is studied in the vicinity of its melting transition by using Brownian dynamics computer simulation, dynamical density functional theory and phase-field crystal modelling. A vacancy is created by taking out a particle from an equilibrated crystal and the relaxation dynamics of the vacancy is followed by monitoring the time-dependent one-particle density. We find that the vacancy is quickly filled up by diffusive hopping of neighbouring particles towards the vacancy center. We examine the temperature dependence of the diffusion constant and find that it decreases with decreasing temperature in the simulations. This trend is reproduced by the dynamical density functional theory. Conversely, the phase field crystal calculations predict the opposite trend. Therefore, the phase-field model needs a temperature-dependent expression for the mobility to predict trends correctly.

Sven van Teeffelen; Cristian Vasile Achim; Hartmut Lwen

2013-02-05T23:59:59.000Z

431

Chief Joseph Kokanee Enhancement Project; Strobe Light Deterrent Efficacy Test and Fish Behavior Determination at the Grand Coulee Dam Third Powerplant Forebay, 2003-2004 Annual Report.  

SciTech Connect (OSTI)

Since 1995, the Confederated Tribes of the Colville Reservation (Colville Confederated Tribes) have managed the Chief Joseph Kokanee Enhancement Project as part of the Northwest Power Planning Council (NWPPC) Fish and Wildlife Program. Project objectives have focused on understanding natural production of kokanee (a land-locked sockeye salmon) and other fish stocks in the area above Grand Coulee and Chief Joseph Dams on the Columbia River. A 42-month investigation from 1996 to 1999 determined that from 211,685 to 576,676 fish were entrained annually at Grand Coulee Dam. Analysis of the entrainment data found that 85% of the total entrainment occurred at the dam's third powerplant. These numbers represent a significant loss to the tribal fisheries upstream of the dam. In response to a suggestion by the NWPPC Independent Scientific Review Panel, the scope of work for the Chief Joseph Kokanee Enhancement Project was expanded to include a multiyear pilot test of a strobe light system to help mitigate fish entrainment. This report details the work conducted during the third year of the strobe light study by researchers of the Colville Confederated Tribes in collaboration with the Pacific Northwest National Laboratory. The objective of the study is to determine the efficacy of a prototype strobe light system to elicit a negative phototactic response in kokanee and rainbow trout under field conditions. The prototype system consists of six strobe lights affixed to an aluminum frame suspended 15 m vertically underwater from a barge secured in the center of the entrance to the third powerplant forebay. The lights, controlled by a computer, illuminate a region directly upstream of the barge. The 2003 study period extended from June 16 through August 1. Three light treatments were used: all six lights on for 24 hours, all lights off for 24 hours, and three of six lights cycled on and off every hour for 24 hours. These three treatment conditions were assigned randomly within a 3-day block throughout the study period. Hydroacoustic technology was used to evaluate the effectiveness of the strobe lights in eliciting a negative phototactic response in fish. The hydroacoustic system in 2003 comprised seven splitbeam transducers arrayed in front of the strobe lights, two multibeam transducers behind the lights, and a mobile splitbeam system. The seven splitbeam transducers were deployed so they tracked fish entering and within the region illuminated by the strobe lights. These transducers were spaced approximately 4 m apart on an aluminum frame floating upstream of the barge and looked vertically downward. The multibeam transducers monitored the distribution of fish directly behind and to both sides of the lights, while the mobile splitbeam system looked at the distribution of fish within the third powerplant forebay. To augment the hydroacoustic data, additional studies were conducted. The hydrodynamic characteristics of the third powerplant forebay were measured, and acoustically tagged juvenile kokanee were released upstream of the strobe lights and tracked within the forebay and downstream of the dam. Analysis of the effect of strobe lights on kokanee and rainbow trout focused on the number of fish detected in each of the areas covered by one of the downlooking transducers, the timing of fish arrivals after the status of the strobe lights changed, fish swimming effort (detected velocity minus flow velocity), and fish swimming direction. Water velocity measurements were used to determine fish swimming effort. The tracking of tagged kokanee provided data on fish movements into and out of the third powerplant forebay, including entrainment.

Simmons, M.; McKinstry, C.; Cook, C.

2004-01-01T23:59:59.000Z

432

Quench Tests of LHC Magnets with Beam: Studies on Beam Loss development and determination of Quench levels  

E-Print Network [OSTI]

The application of superconducting materials in the field of high energy accelerator physics not only opens the doors to the generation of the magnetic fields unattainable to normal conductors but also demands facing new challenges. A transition fromthe superconducting state, which is characterized by a resistance-free flow of the electric current, to the normal conducting state is called quenching. This process might be extremely dangerous and even lead to destruction of amagnet superconducting coil if no protecting actions are taken. Therefore, the knowledge of a magnet quench level, i.e. amount of energy which causes the transition to the resistive state, is crucial for the safety and operational efficiency of the accelerator. Regarding that, specific thresholds are incorporated to dedicated quench prevention systems in order to suppress the origin of detected energy perturbation, for example beam losses, or mitigate the consequences of the quenching process by dissipating the energy stored in the magnetic...

Priebe, A; Sapinski, M

433

Wind-tunnel simulation of field dispersion tests (by the U.K. health and safety executive) of water-spray curtains  

Science Journals Connector (OSTI)

Field trials of water-spray curtain tests performed by the (British) Health and Safety Executive and designated by HSE 41 and HSE 46 were modeled at a scale ratio of 1:28.9 in an atmospheric boundary-layer win...

R. N. Meroney; D. E. Neff; G. Heskestad

434

CERTIFICATE OF FIELD VERIFICATION AND DIAGNOSTIC TESTING CF-4R-ENV-22 Quality Insulation Installation (QII) -Insulation Stage Checklist (Page 1 of 3)  

E-Print Network [OSTI]

CERTIFICATE OF FIELD VERIFICATION AND DIAGNOSTIC TESTING CF-4R-ENV-22 Quality Insulation Installation (QII) - Insulation Stage Checklist (Page 1 of 3) Site Address: Enforcement Agency: Permit Number: ____________ 2008 Residential Compliance Forms May 2012 All structural framing areas shall be insulated in a manner

435

Kelly, R. B., Houlsby, G. T. & Byrne, B. W. (2006). Geotechnique 56, No. 9, 617626 A comparison of field and laboratory tests of caisson foundations in  

E-Print Network [OSTI]

Kelly, R. B., Houlsby, G. T. & Byrne, B. W. (2006). Ge´otechnique 56, No. 9, 617­626 617 A comparison of field and laboratory tests of caisson foundations in sand and clay R. B. KELLY ? , G. T. (2002, 2003), Kelly et al. (2003, 2004) and Houlsby et al. (2005, 2006). Suction caissons for offshore

Byrne, Byron

436

PVSAT-2: RESULTS OF FIELD TEST OF THE SATELLITE-BASED PV SYSTEM PERFORMANCE CHECK A.C. de Keizer1  

E-Print Network [OSTI]

PVSAT-2: RESULTS OF FIELD TEST OF THE SATELLITE-BASED PV SYSTEM PERFORMANCE CHECK A.C. de Keizer1 has been developed. Measured energy yield and simulated yield that is based on satellite information. The uncertainty in the simulated energy yield can be high for cloudy weather situations

Heinemann, Detlev

437

DOE/EA-1626: Final Environmental Assessment for Midwest Geological Sequestration Consortium (MGSC) Phase III Large-Scale Field Test (October 2008)  

Broader source: Energy.gov (indexed) [DOE]

26 26 FINAL ENVIRONMENTAL ASSESSMENT Midwest Geological Sequestration Consortium (MGSC) Phase III Large-Scale Field Test Decatur, Illinois October 2008 U.S. DEPARTMENT OF ENERGY NATIONAL ENERGY TECHNOLOGY LABORATORY U.S. Department of Energy MGSC Phase III National Energy Technology Laboratory Final Environmental Assessment ______________________________________________________________________________ Table of Contents i October 2008 TABLE OF CONTENTS LIST OF TABLES.......................................................................................................................... v LIST OF FIGURES ........................................................................................................................

438

Determination of piezoelectric fields in strained GaInN quantum wells using the quantum-confined Stark effect  

E-Print Network [OSTI]

fields on optical prop- erties in the cases of GaInAs/GaAs QWs2 and CdS/CdSe superlattices4 on GaAs 111 MOVPE . The total un- doped region sandwiched by n and p layers is 51 nm. The carrier concentrations

Wetzel, Christian M.

439

Experimental investigation of the correlation of relative density of cohesionless soils as currently determined by field exploration methods  

E-Print Network [OSTI]

of these tests and assisted. by providing the Canadian River sand end a penetrometer for ase in the testing. Also the Raymond Conorete Pile Company for the use of their sampler. XQSrcCaeNen, yw'eayy ~ pa ~ ~ ~ g ~ ev. vpssyyp ~ Ths PreMeme ~ 0 f ~ i ~ 0 4 0... ~ . ~ + 0 i ~ 0 0 ~ ~ 0 ~ Hmumary of FieXS Lxpkeritorj Se45eds for SRBBX. Q@ 88% si 44 ~ tk tf 0 ~ $ f 0 ~ ~ 4, General Censidqrat ien, ?. .. . . , , 8 g ~ her ings ~ ~ ~ ~ ~ ~ ~ ~ ~ f ~ ~ ~ ~ p ~ Co Rotary Brlklling1 f f ~ t ~ ~ ~ t p ~ ~ Bq Anger...

Bohlmann, Willy Frank

2012-06-07T23:59:59.000Z

440

Thermal single-well injection-withdrawal tracer tests for determining fracture-matrix heat transfer area  

SciTech Connect (OSTI)

Single-well injection-withdrawal (SWIW) tracer tests involve injection of traced fluid and subsequent tracer recovery from the same well, usually with some quiescent time between the injection and withdrawal periods. SWIW are insensitive to variations in advective processes that arise from formation heterogeneities, because upon withdrawal, fluid parcels tend to retrace the paths taken during injection. However, SWIW are sensitive to diffusive processes, such as diffusive exchange of conservative or reactive solutes between fractures and rock matrix. This paper focuses on SWIW tests in which temperature itself is used as a tracer. Numerical simulations demonstrate the sensitivity of temperature returns to fracture-matrix interaction. We consider thermal SWIW response to the two primary reservoir improvements targeted with stimulation, (1) making additional fractures accessible to injected fluids, and (2) increasing the aperture and permeability of pre-existing fractures. It is found that temperature returns in SWIW tests are insensitive to (2), while providing a strong signal of more rapid temperature recovery during the withdrawal phase for (1).

Pruess, K.; Doughty, C.

2010-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "determination field test" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Proceedings of the sixth Japan--US workshop on high-field superconducting materials and standard procedures for high-field superconducting materials testing  

SciTech Connect (OSTI)

High critical current densities and high magnetic fields are needed for most important energy application of both conventional and high-Tc superconductors. This workshop brought together those engaged research on high-field superconductors in Japan and the US to present recent research results on performance of new high-field superconducting materials and to discuss the most promising directions for research, specifically as it relates to the fusion energy needs of both countries. Topics covered included critical currents, irradiation effects, ac losses, magnetization properties, and new fabrication processes for conventional superconductors. An entire session was devoted to presentations on the properties of Nb{sub 3}Al superconductors. Large magnet research programs for energy applications were reviewed, including the tokamak fusion machine at JAERI, the joint US-Japan Nb{sub 3}Sn poloidal-field-coll development program, and the proposed International Thermonuclear Experimental Reactor (ITER) project. Results were also presented on the VAMAS round robin in three areas; J{sub c}, stress effects, and ac losses. Finally, some current research results on experimental high-{Tc} superconductors were reviewed, with particular emphasis on new fabrication processes and the factors limiting the critical current in high-current conductors. Separate abstracts have been prepared.

Tachikawa, K. [ed.] [Tokai Univ., Kanagawa (Japan). Faculty of Engineering; Yamafuji, K. [ed.] [Kyushu Univ., Fukuoka (Japan). Dept. of Electronics; Wada, H. [ed.] [National Research Inst. for Metals, Tsukuba, Ibaraki (Japan); Ekin, J.W. [ed.] [National Inst. of Standards and Technology, Boulder, CO (United