National Library of Energy BETA

Sample records for determination aerial photography

  1. Aerial Photography | Open Energy Information

    Open Energy Info (EERE)

    orientation guides in the field. One type of aerial photography, termed low-sun-angle (LSA) aerial photography, can be used to identify areas of uplift associated with faults...

  2. Category:Aerial Photography | Open Energy Information

    Open Energy Info (EERE)

    Aerial Photography Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Aerial Photography page? For detailed information on Aerial...

  3. Aerial Photography (Nannini, 1986) | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography (Nannini, 1986) Exploration Activity Details Location Unspecified Exploration...

  4. Aerial Photography At Pilgrim Hot Springs Area (Prakash, Et Al...

    Open Energy Info (EERE)

    to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Pilgrim Hot Springs Area (Prakash, Et Al., 2010) Exploration Activity Details...

  5. Aerial Photography At Beowawe Hot Springs Area (Wesnousky, Et...

    Open Energy Info (EERE)

    to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Beowawe Hot Springs Area (Wesnousky, Et Al., 2003) Exploration Activity Details...

  6. Aerial Photography At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Blue...

  7. Aerial Photography At Roosevelt Hot Springs Geothermal Area ...

    Open Energy Info (EERE)

    Petersen, 1975) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Roosevelt Hot Springs Geothermal Area (Petersen, 1975)...

  8. Aerial Photography At Brady Hot Springs Area (Wesnousky, Et Al...

    Open Energy Info (EERE)

    Brady Hot Springs Area (Wesnousky, Et Al., 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Brady Hot Springs Area...

  9. Aerial Photography At Nevada Test And Training Range Area (Sabin...

    Open Energy Info (EERE)

    Nevada Test And Training Range Area (Sabin, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Nevada Test And...

  10. Aerial Photography At Coso Geothermal Area (1968-1971) | Open...

    Open Energy Info (EERE)

    useful DOE-funding Unknown Exploration Basis Fumarolic and hot springs activity Notes Color photography has the greatest utility in locating areas of presently active thermal...

  11. Categorical Exclusion Determinations: B3.2 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    December 23, 2014 CX-013312: Categorical Exclusion Determination Aerial Photography and ... April 4, 2013 CX-010350: Categorical Exclusion Determination Aerial Photography Activity ...

  12. Use of Aerial Photography to Monitor Fall Chinook Salmon Spawning in the Columbia River

    SciTech Connect (OSTI)

    Visser, Richard H.; Dauble, Dennis D.); Geist, David R.)

    2002-11-01

    This paper compares two methods for enumerating salmon redds and their application to monitoring spawning activity. Aerial photographs of fall chinook salmon spawning areas in the Hanford Reach of the Columbia River were digitized and mapped using Geographic Information Systems (GIS) techniques in 1994 and 1995 as part of an annual assessment of the population. The number of visible redds from these photographs were compared to counts obtained from visual surveys with fixed wing aircraft. The proportion of the total redds within each of five general survey areas was similar for the two monitoring techniques. However, the total number of redds based on aerial photographs was 2.2 and 3.0 times higher than those observed during visual surveys for 1994 and 1995, respectively. The divergence in redd counts was most evident near peak spawning activity when the number of redds within individual spawning clusters exceeded 500. Aerial photography improved our ability to monitor numbers of visible salmon redds and to quantify habitat use.

  13. Oblique Aerial & Ground Visible Band & Thermographic Imaging...

    Open Energy Info (EERE)

    definition has been provided for this term. Add a Definition Related Techniques Passive Sensors Aerial Photography FLIR Geodetic Survey Hyperspectral Imaging Long-Wave Infrared...

  14. Photography | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photography Photography Photographic services include the Photography Office and the Energy Technology Visuals Collection (ETVC) Visuals Library. Photography Forrestal: Room BH-071 Phone: (202) 586-1350 The Photography Office is a fully digital in-house lab that serves all of the Department of Energy's Facilities. Requesting a photographer for an assignment: The department photographers cover photographic assignments within DOE buildings and other locations. All requests for services must be

  15. High-Speed Photography

    SciTech Connect (OSTI)

    Paisley, D.L.; Schelev, M.Y.

    1998-08-01

    The applications of high-speed photography to a diverse set of subjects including inertial confinement fusion, laser surgical procedures, communications, automotive airbags, lightning etc. are briefly discussed. (AIP) {copyright} {ital 1998 Society of Photo-Optical Instrumentation Engineers.}

  16. Los Alamos National Laboratory ATOMIC PHOTOGRAPHY ATOMIC PHOTOGRAPHY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATOMIC PHOTOGRAPHY ATOMIC PHOTOGRAPHY BLASTS FROM THE PAST BLASTS FROM THE PAST Twenty-five U.S. atmospheric nuclear weapons operations (each a series of tests) were conducted from ...

  17. Aerial Photography At Truckhaven Area (Layman Energy Associates...

    Open Energy Info (EERE)

    indicated DOE-funding Unknown References Layman Energy Associates Inc. (2006) Final Scientific - Technical Report, Geothermal Resource Exploration Program, Truckhaven Area,...

  18. Aerial Photography At Dixie Valley Geothermal Area (Wesnousky...

    Open Energy Info (EERE)

    Field And Other Geothermal Fields Of The Basin And Range David D. Blackwell, Richard P. Smith, Al Waibel, Maria C. Richards, Patrick Stepp (2009) Why Basin and Range Systems are...

  19. Aerial Photography At Roosevelt Hot Springs Geothermal Area ...

    Open Energy Info (EERE)

    infrared. References S. H. Ward, W. T. Parry, W. P. Nash, W. R. Sill, K. L. Cook, R. B. Smith, D. S. Chapman, F. H. Brown, J. A. Whelan, J. R. Bowman (1978) A Summary of the...

  20. Aerial Photography At Dixie Valley Geothermal Area (Blackwell...

    Open Energy Info (EERE)

    David D. Blackwell, Kenneth W. Wisian, Maria C. Richards, Mark Leidig, Richard Smith, Jason McKenna (2003) Geothermal Resource Analysis and Structure of Basin and Range...

  1. Aerial Photography At Chena Geothermal Area (Kolker, 2008) |...

    Open Energy Info (EERE)

    bedrock faulting in the vicinity of the thermal anomaly identified from a previous ground temperature survey (Biggar 1973). References Amanda M. Kolker (2008) Geologic...

  2. Aerial Photography At Hawthorne Area (Lazaro, Et Al., 2010) ...

    Open Energy Info (EERE)

    GPO has contracted the University of Nevada Reno Great Basin for Center for Geothermal Research to conduct additional field exploration at HAD. The tasks required by the Navy...

  3. Aerial Photography At Dixie Valley Geothermal Area (Helton, Et...

    Open Energy Info (EERE)

    analyze faults in southern Dixie Valley. The study was done for the Department of the Navy Geothermal Program Office's NAS Fallon Geothermal Exploration Project. Notes High...

  4. Atomic Photography: Blasts from the Past

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Photography National Security Science Latest Issue:July 2015 past issues All Issues submit Atomic Photography: Blasts from the Past A gallery of images reveals the weird...

  5. CX-013312: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Aerial Photography and Topographic Mapping of the Weldon Spring, Missouri, Site CX(s) Applied: B3.2Date: 12/23/2014 Location(s): MissouriOffices(s): Legacy Management

  6. CX-010350: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Aerial Photography Activity Over the Proposed Richmond Bay Campus CX(s) Applied: B3.2 Date: 04/04/2013 Location(s): California Offices(s): Berkeley Site Office

  7. Los Alamos National Laboratory ATOMIC PHOTOGRAPHY ATOMIC PHOTOGRAPHY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATOMIC PHOTOGRAPHY ATOMIC PHOTOGRAPHY BLASTS FROM THE PAST BLASTS FROM THE PAST Twenty-five U.S. atmospheric nuclear weapons operations (each a series of tests) were conducted from 1945 to 1963, primarily at the Pacific Proving Grounds and at the Nevada Test Site, southeastern Nevada. Below, observers witness Operation Greenhouse, Eniwetok Atoll, spring 1951. Greenhouse was a series of four tests. 17 Proof of principle for thermonuclear weapons, the 225-kiloton George test, May 8, 1951, of

  8. Aerial Measuring System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1991-09-20

    To establish policy for the Department of Energy's (DOE) Aerial Measuring System (AMS) Program. This directive does not cancel another directive. Canceled by DOE O 153.1.

  9. Fermilab | Tritium at Fermilab | Ferry Creek Aerial View

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ferry Creek Aerial View Ferry Creek Aerial View

  10. Fermilab | Tritium at Fermilab | Kress Creek Aerial View

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kress Creek Aerial View Kress Creek Aerial View

  11. ARM Aerial Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Campaigns 1993 - 2006, 2015 Other Aircraft Campaigns 1993 - 2010 AAF Contacts Rickey Petty DOE AAF Program Director Beat Schmid Technical Director ARM Aerial Facility aaf-g1 As...

  12. ADMINISTRATIVE RECORDS SCHEDULE 17: CARTOGRAPHIC, AERIAL PHOTOGRAPHIC...

    Energy Savers [EERE]

    7: CARTOGRAPHIC, AERIAL PHOTOGRAPHIC, ARCHITECTURAL, ENGINEERING, AND FACILITY MANAGEMENT RECORDS ADMINISTRATIVE RECORDS SCHEDULE 17: CARTOGRAPHIC, AERIAL PHOTOGRAPHIC,...

  13. CX-001598: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Aerial Photography of Solar Parabolic Trough Field at Cameo, ColoradoCX(s) Applied: B3.1, B3.6Date: 04/08/2010Location(s): Cameo, ColoradoOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  14. CX-001600: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Aerial Photography of Solar Parabolic Trough Field at Abengoa Research Facilities, Lakewood, ColoradoCX(s) Applied: B3.1, B3.6Date: 04/08/2010Location(s): Lakewood, ColoradoOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  15. Aerial Measuring System in Japan

    SciTech Connect (OSTI)

    Lyons, C., Colton, D. P.

    2012-05-01

    The U.S. Department of Energy National Nuclear Security Agencys Aerial Measuring System deployed personnel and equipment to partner with the U.S. Air Force in Japan to conduct multiple aerial radiological surveys. These were the first and most comprehensive sources of actionable information for U.S. interests in Japan and provided early confirmation to the government of Japan as to the extent of the release from the Fukushima Daiichi Nuclear Power Generation Station. Many challenges were overcome quickly during the first 48 hours; including installation and operation of Aerial Measuring System equipment on multiple U.S. Air Force Japan aircraft, flying over difficult terrain, and flying with talented pilots who were unfamiliar with the Aerial Measuring System flight patterns. These all combined to make for a dynamic and non-textbook situation. In addition, the data challenges of the multiple and on-going releases, and integration with the Japanese government to provide valid aerial radiological survey products that both military and civilian customers could use to make informed decisions, was extremely complicated. The Aerial Measuring System Fukushima response provided insight in addressing these challenges and gave way to an opportunity for the expansion of the Aerial Measuring Systems mission beyond the borders of the US.

  16. Award-winning film director to discuss technical photography during

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    atmospheric testing years Atomic Bomb Photography and the EG&G Film Project Award-winning film director to discuss technical photography during atmospheric testing years Peter Kuran will discuss Edgerton, Germeshausen, and Grier, Inc.'s role in filming the technical photography during the atmospheric testing years. June 5, 2014 Bradbury Science Museum Bradbury Science Museum Contact Steve Sandoval Communications Office (505) 665-9206 Email "I've been researching nuclear test

  17. Award-winning film director to discuss technical photography...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    during atmospheric testing years Peter Kuran will discuss Edgerton, Germeshausen, and Grier, Inc.'s role in filming the technical photography during the atmospheric testing years. ...

  18. International-Aerial Measuring System (I-AMS) Training Program

    SciTech Connect (OSTI)

    Wasiolek, Piotre T.; Malchor, Russell L.; Maurer, Richard J.; Adams, Henry L.

    2015-10-01

    Since the Fukushima reactor accident in 2011, there has been an increased interest worldwide in developing national capabilities to rapidly map and assess ground contamination resulting from nuclear reactor accidents. The capability to rapidly measure the size of the contaminated area, determine the activity level, and identify the radionuclides can aid emergency managers and decision makers in providing timely protective action recommendations to the public and first responders. The development of an aerial detection capability requires interagency coordination to assemble the radiation experts, detection system operators, and aviation aircrews to conduct the aerial measurements, analyze and interpret the data, and provide technical assessments. The Office of International Emergency Management and Cooperation (IEMC) at the U.S. Department of Energy, National Nuclear Security Administration (DOE/NNSA) sponsors an International - Aerial Measuring System (I-AMS) training program for partner nations to develop and enhance their response to radiological emergencies. An initial series of courses can be conducted in the host country to assist in developing an aerial detection capability. As the capability develops and expands, additional experience can be gained through advanced courses with the opportunity to conduct aerial missions over a broad range of radiation environments.

  19. Aerial robotic data acquisition system

    SciTech Connect (OSTI)

    Hofstetter, K.J.; Hayes, D.W.; Pendergast, M.M.; Corban, J.E.

    1993-12-31

    A small, unmanned aerial vehicle (UAV), equipped with sensors for physical and chemical measurements of remote environments, is described. A miniature helicopter airframe is used as a platform for sensor testing and development. The sensor output is integrated with the flight control system for real-time, interactive, data acquisition and analysis. Pre-programmed flight missions will be flown with several sensors to demonstrate the cost-effective surveillance capabilities of this new technology.

  20. High-speed photography of energetic materials and components with a copper vapor laser

    SciTech Connect (OSTI)

    Dosser, L.R.; Reed, J.W.; Stark, M.A.

    1988-01-01

    The evaluation of the properties of energetic materials, such as burn rate and ignition energy, is of primary importance in understanding their reactions and the functioning of devices containing them. One method for recording such information is high-speed photography at rates of up to 20,000 images per second. When a copper vapor laser is synchronized with the camera, laser-illuminated images can be recorded that detail the performance of a material and/or component in a manner never before possible. The laser can also be used for ignition of the energetic material, thus eliminating the need for bridgewires or electric squibs that can interfere with photography. Details of such ignitions are readily observable, and the burn rate of a material can be determined directly from the film. There are indications that information useful for the modeling of pyrotechnic reactions will become available as well. Recent results from high-speed photography of several pyrotechnic materials and devices will be presented. 9 figs.

  1. Aerial Monitoring System | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Aerial Monitoring System NNSA to Participate in Aerial Radiation Training Exercise in Philadelphia, Pennsylvania (WASHINGTON, D.C.) - On March 21 through March 24, the Department of Energy's National Nuclear Security Administration (NNSA) will participate in a federal and state/local training exercise in Philadelphia that will also include the Philadelphia Police Department and the Departments of Defense,

  2. Solar-powered unmanned aerial vehicles

    SciTech Connect (OSTI)

    Reinhardt, K.C.; Lamp, T.R.; Geis, J.W.; Colozza, A.J.

    1996-12-31

    An analysis was performed to determine the impact of various power system components and mission requirements on the size of solar-powered high altitude long endurance (HALE)-type aircraft. The HALE unmanned aerial vehicle (UAV) has good potential for use in many military and civil applications. The primary power system components considered in this study were photovoltaic (PV) modules for power generation and regenerative fuel cells for energy storage. The impact of relevant component performance on UAV size and capability were considered; including PV module efficiency and mass, power electronics efficiency, and fuel cell specific energy. Mission parameters such as time of year, flight altitude, flight latitude, and payload mass and power were also varied to determine impact on UAV size. The aircraft analysis method used determines the required aircraft wing aspect ratio, wing area, and total mass based on maximum endurance or minimum required power calculations. The results indicate that the capacity of the energy storage system employed, fuel cells in this analysis, greatly impacts aircraft size, whereas the impact of PV module efficiency and mass is much less important. It was concluded that an energy storage specific energy (total system) of 250--500 Whr/kg is required to enable most useful missions, and that PV cells with efficiencies greater than {approximately} 12% are suitable for use.

  3. The DOE ARM Aerial Facility

    SciTech Connect (OSTI)

    Schmid, Beat; Tomlinson, Jason M.; Hubbe, John M.; Comstock, Jennifer M.; Mei, Fan; Chand, Duli; Pekour, Mikhail S.; Kluzek, Celine D.; Andrews, Elisabeth; Biraud, S.; McFarquhar, Greg

    2014-05-01

    The Department of Energy Atmospheric Radiation Measurement (ARM) Program is a climate research user facility operating stationary ground sites that provide long-term measurements of climate relevant properties, mobile ground- and ship-based facilities to conduct shorter field campaigns (6-12 months), and the ARM Aerial Facility (AAF). The airborne observations acquired by the AAF enhance the surface-based ARM measurements by providing high-resolution in-situ measurements for process understanding, retrieval-algorithm development, and model evaluation that are not possible using ground- or satellite-based techniques. Several ARM aerial efforts were consolidated into the AAF in 2006. With the exception of a small aircraft used for routine measurements of aerosols and carbon cycle gases, AAF at the time had no dedicated aircraft and only a small number of instruments at its disposal. In this "virtual hangar" mode, AAF successfully carried out several missions contracting with organizations and investigators who provided their research aircraft and instrumentation. In 2009, AAF started managing operations of the Battelle-owned Gulfstream I (G-1) large twin-turboprop research aircraft. Furthermore, the American Recovery and Reinvestment Act of 2009 provided funding for the procurement of over twenty new instruments to be used aboard the G-1 and other AAF virtual-hangar aircraft. AAF now executes missions in the virtual- and real-hangar mode producing freely available datasets for studying aerosol, cloud, and radiative processes in the atmosphere. AAF is also engaged in the maturation and testing of newly developed airborne sensors to help foster the next generation of airborne instruments.

  4. Cost analysis of aerial photographic and satellite imagery for monitoring mined land reclamation

    SciTech Connect (OSTI)

    Green, J.E.; Buschur, J.P.

    1980-12-01

    Five sections of the Surface Mining Control and Reclamation Act of 1977 require information that is easily and efficiently obtainable by aerial photographic and remote sensing methods. Most states in which mining is important and to which the Act most specifically applies, maintain or have available to them aerial photographic or remotely sensed information of the type required. This information could be used to meet the requirements of the Act which call for monitoring reclamation progress, identifying land areas unsuitable for mining and determining land use prior to mining to name a few examples. At the regional scale, LANDSAT imagery of a scale of 1:250,000 provides a good combination of aerial coverage and detail for regional problem solving. At the local scale, such coverage as is provided by the Agricultural Stabilization and Conservation Service through their aerial observation method of compliance technique can supply local, detailed information to meet site specific needs.

  5. Aerial Measuring System | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Management Aerial Measuring System AMS Logo NNSA's Aerial Measuring System (AMS) provides specialized airborne radiation detection systems to provide real-time measurements of low levels of air and ground contamination. The AMS team consists of scientists, technicians, pilots, and ground support personnel. These trained experts are in charge of maintaining a state of readiness to respond to a radiological emergency at any time. The team is based out of Nellis Air Force Base in Las Vegas, Nevada,

  6. High speed photography and photonics applications: An underutilized technology

    SciTech Connect (OSTI)

    Paisley, D.L.

    1996-10-01

    Snapshot: Paisley describes the development of high-speed photography including the role of streak cameras, fiber optics, and lasers. Progress in this field has created a powerful tool for viewing such ultrafast processes as hypersonic events and ballistics. {copyright} {ital 1996 Optical Society of America.} [1047-6938-96-10-9939-04

  7. Recency Of Faulting And Neotechtonic Framework In The Dixie Valley...

    Open Energy Info (EERE)

    Photography At Beowawe Hot Springs Area (Wesnousky, Et Al., 2003) Aerial Photography At Brady Hot Springs Area (Wesnousky, Et Al., 2003) Aerial Photography At Dixie Valley...

  8. Simultaneous velocity interferometry and electronic streak photography of laser-launched plates

    SciTech Connect (OSTI)

    Paisley, D.L.; Stahl, D.B.; Garcia, I.A.

    1991-01-01

    Laser-launched, miniature, pseudo-one-dimensional flyer plates are evaluated by three distinct optical techniques that may be incorporated into an optical diagnostic system to give a complete understanding of the plate performance. These techniques are: velocity interferometry, streak photography, and pulsed laser stereo photography. 2 refs., 5 figs.

  9. Recent advances in high speed photography and associated technologies in the USA

    SciTech Connect (OSTI)

    Paisley, D.L.

    1988-01-01

    In the past decade, high speed photography has been rapidly incorporating electro-optics. More recently, optoelectronics and digital recording of images for specialized laboratory cameras and commerically available systems have helped broaden the versatility and applications of high speed photography and photonics. This paper will highlight some of these technologies and specialized systems. 10 refs., 22 figs.

  10. Ultralight photovoltaic modules for unmanned aerial vehicles

    SciTech Connect (OSTI)

    Nowlan, M.J.; Maglitta, J.C.; Darkazalli, G.; Lamp, T.

    1997-12-31

    New lightweight photovoltaic modules are being developed for powering high altitude unmanned aerial vehicles (UAVs). Modified low-cost terrestrial solar cell and module technologies are being applied to minimize vehicle cost. New processes were developed for assembling thin solar cells, encapsulant films, and cover films. An innovative by-pass diode mounting approach that uses a solar cell as a heat spreader was devised and tested. Materials and processes will be evaluated through accelerated environmental testing.

  11. Modcopter: Prompt, Precise Aerial Sample Collection Using Unmanned...

    Office of Scientific and Technical Information (OSTI)

    Title: Modcopter: Prompt, Precise Aerial Sample Collection Using Unmanned Systems Authors: Curtis, Aaron 1 ; Elliott, James 2 ; Ronquest, Michael 3 ; Mascarenas, David D. 3 ...

  12. Determination

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Determination of a Minimum Soiling Level to Affect Photovoltaic Devices Patrick D. Burton and Bruce H. King Sandia National Laboratories, Albuquerque, NM 87185 USA...

  13. In-situ Raman spectroscopy and high-speed photography of a shocked triaminotrinitrobenzene based explosive

    SciTech Connect (OSTI)

    Saint-Amans, C.; Hébert, P. Doucet, M.; Resseguier, T. de

    2015-01-14

    We have developed a single-shot Raman spectroscopy experiment to study at the molecular level the initiation mechanisms that can lead to sustained detonation of a triaminotrinitrobenzene-based explosive. Shocks up to 30 GPa were generated using a two-stage laser-driven flyer plate generator. The samples were confined by an optical window and shock pressure was maintained for at least 30 ns. Photon Doppler Velocimetry measurements were performed at the explosive/window interface to determine the shock pressure profile. Raman spectra were recorded as a function of shock pressure and the shifts of the principal modes were compared to static high-pressure measurements performed in a diamond anvil cell. Our shock data indicate the role of temperature effects. Our Raman spectra also show a progressive extinction of the signal which disappears around 9 GPa. High-speed photography images reveal a simultaneous progressive darkening of the sample surface up to total opacity at 9 GPa. Reflectivity measurements under shock compression show that this opacity is due to a broadening of the absorption spectrum over the entire visible region.

  14. Irradiation-induced Ag nanocluster nucleation in silicate glasses: Analogy with photography

    SciTech Connect (OSTI)

    Espiau de Lamaestre, R.; Bea, H.; Bernas, H.; Belloni, J.; Marignier, J. L.

    2007-11-15

    The synthesis of Ag nanoclusters in soda lime silicate glasses and silica was studied by optical absorption and electron spin resonance experiments under both low (gamma ray) and high (MeV ion) deposited energy density irradiation conditions. Both types of irradiation create electrons and holes whose density and thermal evolution--notably via their interaction with defects--are shown to determine the clustering and growth rates of Ag nanocrystals. We thus establish the influence of redox interactions of defects and silver (poly)ions. The mechanisms are similar to the latent image formation in photography: Irradiation-induced photoelectrons are trapped within the glass matrix, notably on dissolved noble metal ions and defects, which are thus neutralized (reverse oxidation reactions are also shown to exist). Annealing promotes metal atom diffusion, which, in turn, leads to cluster nuclei formation. The cluster density depends not only on the irradiation fluence but also--and primarily--on the density of deposited energy and the redox properties of the glass. Ion irradiation (i.e., large deposited energy density) is far more effective in cluster formation, despite its lower neutralization efficiency (from Ag{sup +} to Ag{sup 0}) as compared to gamma photon irradiation.

  15. Sandia Energy - Sierra Unmanned Aerial Vehicle to Begin Flights...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    unmanned aerial system (UAS) operated by the NASA Ames Research Center in northern California (learn more), began flights over the Arctic sea ice as part of the MIZOPEX (Marginal...

  16. ARM - Field Campaign - Two-Column Aerosol Project (TCAP): Aerial...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsTwo-Column Aerosol Project (TCAP): Aerial Campaign ARM Data Discovery Browse Data Related Campaigns Two-Column Aerosol Project (TCAP) 2012.07.01, Berg, AMF Comments? We...

  17. NNSA, Los Angeles Partner on Mobile Aerial Response Training | National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Security Administration NNSA, Los Angeles Partner on Mobile Aerial Response Training September 13, 2010 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) recently completed training with several Los Angeles-area law enforcement agencies to help officials there learn how to better analyze and transmit aerial data collected in response to a radiological incident. The training, which is jointly administered by NNSA's Office of Emergency Operations and the Department

  18. MODCOPTER: Prompt, Precise Aerial Sample Collection Using Unmanned Systems

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect MODCOPTER: Prompt, Precise Aerial Sample Collection Using Unmanned Systems Citation Details In-Document Search Title: MODCOPTER: Prompt, Precise Aerial Sample Collection Using Unmanned Systems Authors: Mascarenas, David D. [1] ; Curtis, Aaron [2] ; Elliott, James [3] ; Ronquest, Michael [1] ; Kendrick, David T. [1] ; Lakis, Rollin E. [1] + Show Author Affiliations Los Alamos National Laboratory New Mexico Tech North Carolina State Publication Date:

  19. Modcopter: Prompt, Precise Aerial Sample Collection Using Unmanned Systems

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Modcopter: Prompt, Precise Aerial Sample Collection Using Unmanned Systems Citation Details In-Document Search Title: Modcopter: Prompt, Precise Aerial Sample Collection Using Unmanned Systems Authors: Curtis, Aaron [1] ; Elliott, James [2] ; Ronquest, Michael [3] ; Mascarenas, David D. [3] ; Kendrick, David T. [3] ; Lakis, Rollin E. [3] + Show Author Affiliations NM Tech NC State Los Alamos National Laboratory Publication Date: 2013-06-25 OSTI

  20. Unmanned Aerial Systems (UAS) Evaluation of Routine Atmospheric Sounding

    Office of Scientific and Technical Information (OSTI)

    Measurements using Unmanned Systems (ERASMUS) (Dataset) | Data Explorer Data Explorer Search Results Unmanned Aerial Systems (UAS) Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems (ERASMUS) Title: Unmanned Aerial Systems (UAS) Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems (ERASMUS) Data were collected to improve understanding of the Arctic troposphere, and to provide researchers with a focused case-study period for future

  1. An optical water vapor sensor for unmanned aerial vehicles (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect An optical water vapor sensor for unmanned aerial vehicles Citation Details In-Document Search Title: An optical water vapor sensor for unmanned aerial vehicles The water vapor sensor developed by Aerodyne Research, based on the optical absorption of light at {approximately}935 nm, has been successfully demonstrated on board the Pacific Northwest National Laboratory's Gulfstream-1 research aircraft during the Department of Energy's ARM Intensive Operations Period in

  2. Deployment of ARM Aerial Facility (AAF) Scanning Mobility Particle Sizer

    Office of Scientific and Technical Information (OSTI)

    Field Campaign Report (Technical Report) | SciTech Connect Deployment of ARM Aerial Facility (AAF) Scanning Mobility Particle Sizer Field Campaign Report Citation Details In-Document Search Title: Deployment of ARM Aerial Facility (AAF) Scanning Mobility Particle Sizer Field Campaign Report Atmospheric aerosols influence global climate by scattering and absorbing sunlight (direct effects) and by changing the microphysical structure, lifetime, and coverage of clouds (indirect effects). While

  3. Atmospheric Radiation Measurement (ARM) Data from the ARM Aerial Facility

    Office of Scientific and Technical Information (OSTI)

    () | Data Explorer the ARM Aerial Facility Title: Atmospheric Radiation Measurement (ARM) Data from the ARM Aerial Facility The Atmospheric Radiation Measurement (ARM) Program is the largest global change research program supported by the U.S. Department of Energy. The primary goal of the ARM Program is to improve the treatment of cloud and radiation physics in global climate models in order to improve the climate simulation capabilities of these models. ARM data is collected both through

  4. Microsoft Word - frm-070210-GO-EF-1_Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... & Soils Data Figure 3 - 1960s Aerial Photography Site Photos ( Proposed Turbine ... 1.9 ( FIGURE 3 1960s Aerial Photography Proposed Wind Facility Kirkwood ...

  5. Category:Geothermal | Open Energy Information

    Open Energy Info (EERE)

    Hot Springs Geothermal Area (Petersen, 1975) Aerial Photography At Roosevelt Hot Springs Geothermal Area (Ward, Et Al., 1978) Aerial Photography At Truckhaven Area (Layman Energy...

  6. Fermilab | Tritium at Fermilab | Indian Creek Aerial View

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Indian Creek Aerial View Indian Creek Aerial View Indian Creek is a small creek that originates on the Fermilab site and leaves the lab at its southwest corner. The flow of water in the creek varies with the amount of rain that falls during the year. At present, Indian Creek has very low levels of water. Even at its strongest flow, Indian Creek is a shallow creek with a width of a few feet where it leaves the Fermilab site. Just outside the Fermilab site, the creek flows through ponds in the

  7. NNSA to Conduct Aerial Radiation Monitoring Survey over Baltimore Jan.

    National Nuclear Security Administration (NNSA)

    15-16 | National Nuclear Security Administration Monitoring Survey over Baltimore Jan. 15-16 January 14, 2014 WASHINGTON, D.C. - A helicopter may be seen flying at low altitudes over portions of Baltimore, Md., Jan. 15 and 16, 2014. The purpose of the flyovers is to measure naturally occurring background radiation. A twin-engine Bell 412 helicopter, operated by the Remote Sensing Laboratory Aerial Measuring System from Joint Base Andrews, will be equipped with radiation sensing technology.

  8. NNSA to conduct Aerial Radiation Assessment Survey over Boston Harbor |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Nuclear Security Administration conduct Aerial Radiation Assessment Survey over Boston Harbor June 02, 2015 BOSTON- A helicopter may be seen flying at low altitudes around Boston Harbor from June 5 - 7, 2015. The purpose of the flyovers is to measure naturally occurring background radiation. Officials from U.S. Department of Energy's National Nuclear Security Administration (NNSA) announced that the radiation assessment will cover approximately 13 square miles. A twin-engine Bell

  9. NNSA to Participate in Aerial Radiation Training Exercise in Philadelphia,

    National Nuclear Security Administration (NNSA)

    Pennsylvania | National Nuclear Security Administration to Participate in Aerial Radiation Training Exercise in Philadelphia, Pennsylvania March 17, 2016 (WASHINGTON, D.C.) - On March 21 through March 24, the Department of Energy's National Nuclear Security Administration (NNSA) will participate in a federal and state/local training exercise in Philadelphia that will also include the Philadelphia Police Department and the Departments of Defense, Justice/Federal Bureau of Investigation

  10. NNSA to conduct Aerial Radiation Assessment Survey over Boston area |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration to conduct Aerial Radiation Assessment Survey over Boston area April 11, 2016 BOSTON - On April 12 through April 15, the U.S. Department of Energy's National Nuclear Security Administration's (NNSA) will conduct low-altitude helicopter flights around Boston to measure naturally occurring background radiation. Officials from NNSA announced that the radiation assessment will cover approximately 13 square miles. A twin-engine Bell 412 helicopter,

  11. San Francisco Bay Area Aerial Radiation Assessment Survey | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration San Francisco Bay Area Aerial Radiation Assessment Survey January 27, 2016 (SAN JOSE and SAN FRANCISCO, California) - A helicopter may be seen flying at low altitudes over portions of the San Francisco Bay Area from January 29 through February 6, 2016. The purpose of the flyovers is to measure naturally occurring background radiation. Officials from the National Nuclear Security Administration (NNSA) announced that the radiation assessment will cover a

  12. NNSA to conduct Aerial Radiation Assessment Survey over Boston area |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration to conduct Aerial Radiation Assessment Survey over Boston area March 31, 2015 BOSTON- A helicopter may be seen flying at low altitudes around Boston from April 6 - 15, 2015. The purpose of the flyovers is to measure naturally occurring background radiation. Officials from U.S. Department of Energy's National Nuclear Security Administration (NNSA) announced that the radiation assessment will cover approximately 25 square miles. A twin-engine Bell 412

  13. NNSA to conduct Aerial Radiation Assessment Survey over Phoenix,

    National Nuclear Security Administration (NNSA)

    Scottsdale, Glendale, Tempe Areas | National Nuclear Security Administration to conduct Aerial Radiation Assessment Survey over Phoenix, Scottsdale, Glendale, Tempe Areas January 21, 2015 Phoenix - A helicopter may be seen flying at low altitudes over portions of Phoenix, Scottsdale, Glendale and Tempe from Jan. 22 through 28, 2015. The purpose of the flyovers is to measure naturally occurring background radiation. Officials from National Nuclear Security Administration (NNSA) announced that

  14. Synthesis of the unmanned aerial vehicle remote control augmentation system

    SciTech Connect (OSTI)

    Tomczyk, Andrzej

    2014-12-10

    Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are not suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the 'ideal' remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system.

  15. 1944 aerial photo of Y-12 under construction | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information 40s To view OSTI Historical Photo Gallery, you can browse the collections below. 1950s | 1960s | 1970s | 1980s | 1990s | 2000s 1940: Display 1940: AEC Seal 1940: Manager 1947 AF Thompson Jr. 1940: Manager 1948-1951 Dr. Brewer F. Boardman Complex

    1944 aerial photo of Y-12 ... 1944 aerial photo of Y-12 under construction A 1944 aerial photo showing various building under construction at Y-12.

  16. The DOE ARM Aerial Facility (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The DOE ARM Aerial Facility Citation Details In-Document Search Title: The DOE ARM Aerial Facility The Department of Energy Atmospheric Radiation Measurement (ARM) Program is a climate research user facility operating stationary ground sites that provide long-term measurements of climate relevant properties, mobile ground- and ship-based facilities to conduct shorter field campaigns (6-12 months), and the ARM Aerial Facility (AAF). The airborne observations acquired by the AAF

  17. Radiometric and geometric analysis of hyperspectral imagery acquired from an unmanned aerial vehicle

    SciTech Connect (OSTI)

    Hruska, Ryan; Mitchell, Jessica; Anderson, Matthew; Glenn, Nancy F.

    2012-09-17

    During the summer of 2010, an Unmanned Aerial Vehicle (UAV) hyperspectral in-flight calibration and characterization experiment of the Resonon PIKA II imaging spectrometer was conducted at the U.S. Department of Energys Idaho National Laboratory (INL) UAV Research Park. The purpose of the experiment was to validate the radiometric calibration of the spectrometer and determine the georegistration accuracy achievable from the on-board global positioning system (GPS) and inertial navigation sensors (INS) under operational conditions. In order for low-cost hyperspectral systems to compete with larger systems flown on manned aircraft, they must be able to collect data suitable for quantitative scientific analysis. The results of the in-flight calibration experiment indicate an absolute average agreement of 96.3%, 93.7% and 85.7% for calibration tarps of 56%, 24%, and 2.5% reflectivity, respectively. The achieved planimetric accuracy was 4.6 meters (based on RMSE).

  18. Interferometry and high speed photography of laser-driven flyer plates

    SciTech Connect (OSTI)

    Paisley, D.L.; Montoya, N.I.; Stahl, D.B.; Garcia, I.A.

    1989-01-01

    Laser-driven thin (2-10-/mu/ thick) plates of aluminum and copper are accelerated to velocities /ge/5 km/s by a 1.06-/mu/ wavelength Nd:YAG 8-10 ns FWHM laser pulse at power densities 0.7-4.0 GW/cm/sup 2/. Accelerations /ge/10/sup 9/ km/s/sup 2/ have been achieved. The acceleration and velocity of these 0.4-1.0-mm-diameter plates are experimentally recorded by velocity interferometry (VISAR) and the planarity of impact by streak photography. 6 refs., 7 figs.

  19. AMS/NRCan Joint Survey Report: Aerial Campaign

    SciTech Connect (OSTI)

    Wasiolek, Piotr; Stampahar, Jez; Malchow, Rusty; Stampahar, Tom; Lukens, Mike; Seywerd, Henry; Fortin, Richard; Harvey, Brad; Sinclair, Laurel

    2014-12-31

    In January 2014 the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) Aerial Measuring System (AMS) and the Natural Resources Canada (NRCan) Nuclear Emergency Response project conducted a series of joint surveys at a number of locations in Nevada including the Nevada National Security Site (NNSS). The goal of this project was to compare the responses of the two agencies aerial radiation detection systems and data analysis techniques. This test included varied radioactive surface contamination levels and isotopic composition experienced at the NNSS and the differing data processing techniques utilized by the respective teams. Because both teams used the commercial aerial radiation detection systems from Radiation Solutions, Inc., the main focus of the campaign was to investigate the data acquisition techniques, data analysis, and ground-truth verification. The NRCan system consisted of four 4" 4" 16" NaI(Tl) scintillator crystals of which two were externally mounted in a modified commercial cargo basket certified for the Eurocopter AS350; the NNSA AMS system consisted of twelve 2" 4" 16" NaI(Tl) crystals in externally mounted dedicated pods. For NRCan, the joint survey provided an opportunity to characterize their systems response to extended sources of various fission products at the NNSS. Since both systems play an important role in their respective countries national framework of radiological emergency response and are subject to multiple mutual cooperation agreements, it was important for each country to obtain more thorough knowledge of how they would employ these important assets and define the roles that they would each play in an actual response.

  20. Acquisition and registration of aerial video imagery of urban traffic

    SciTech Connect (OSTI)

    Loveland, Rohan C

    2008-01-01

    The amount of information available about urban traffic from aerial video imagery is extremely high. Here we discuss the collection of such video imagery from a helicopter platform with a low-cost sensor, and the post-processing used to correct radial distortion in the data and register it. The radial distortion correction is accomplished using a Harris model. The registration is implemented in a two-step process, using a globally applied polyprojective correction model followed by a fine scale local displacement field adjustment. The resulting cleaned-up data is sufficiently well-registered to allow subsequent straight-forward vehicle tracking.

  1. Aerial Measuring System (AMS) Baseline Surveys for Emergency Planning

    SciTech Connect (OSTI)

    Lyons, C

    2012-06-04

    Originally established in the 1960s to support the Nuclear Test Program, the AMS mission is to provide a rapid and comprehensive worldwide aerial measurement, analysis, and interpretation capability in response to a nuclear/radiological emergency. AMS provides a responsive team of individuals whose processes allow for a mission to be conducted and completed with results available within hours. This presentation slide-show reviews some of the history of the AMS, summarizes present capabilities and methods, and addresses the value of the surveys.

  2. Encoding and analyzing aerial imagery using geospatial semantic graphs

    SciTech Connect (OSTI)

    Watson, Jean-Paul; Strip, David R.; McLendon, William C.; Parekh, Ojas D.; Diegert, Carl F.; Martin, Shawn Bryan; Rintoul, Mark Daniel

    2014-02-01

    While collection capabilities have yielded an ever-increasing volume of aerial imagery, analytic techniques for identifying patterns in and extracting relevant information from this data have seriously lagged. The vast majority of imagery is never examined, due to a combination of the limited bandwidth of human analysts and limitations of existing analysis tools. In this report, we describe an alternative, novel approach to both encoding and analyzing aerial imagery, using the concept of a geospatial semantic graph. The advantages of our approach are twofold. First, intuitive templates can be easily specified in terms of the domain language in which an analyst converses. These templates can be used to automatically and efficiently search large graph databases, for specific patterns of interest. Second, unsupervised machine learning techniques can be applied to automatically identify patterns in the graph databases, exposing recurring motifs in imagery. We illustrate our approach using real-world data for Anne Arundel County, Maryland, and compare the performance of our approach to that of an expert human analyst.

  3. Aerial Radiation Measurements from the Fukushima Dai-ichi Nuclear Power Plant Accident

    SciTech Connect (OSTI)

    Guss, P. P.

    2012-07-16

    This document is a slide show type presentation concerning DOE and Aerial Measuring System (AMS) activities and results with respect to assessing the consequences of the releases from the Fukushima Dai-ichi Nuclear Power Plant. These include ground monitoring and aerial monitoring.

  4. Learning Scene Categories from High Resolution Satellite Image for Aerial Video Analysis

    SciTech Connect (OSTI)

    Cheriyadat, Anil M

    2011-01-01

    Automatic scene categorization can benefit various aerial video processing applications. This paper addresses the problem of predicting the scene category from aerial video frames using a prior model learned from satellite imagery. We show that local and global features in the form of line statistics and 2-D power spectrum parameters respectively can characterize the aerial scene well. The line feature statistics and spatial frequency parameters are useful cues to distinguish between different urban scene categories. We learn the scene prediction model from highresolution satellite imagery to test the model on the Columbus Surrogate Unmanned Aerial Vehicle (CSUAV) dataset ollected by high-altitude wide area UAV sensor platform. e compare the proposed features with the popular Scale nvariant Feature Transform (SIFT) features. Our experimental results show that proposed approach outperforms te SIFT model when the training and testing are conducted n disparate data sources.

  5. Atmospheric Radiation Measurement (ARM) Data from the ARM Aerial Facility

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Atmospheric Radiation Measurement (ARM) Program is the largest global change research program supported by the U.S. Department of Energy. The primary goal of the ARM Program is to improve the treatment of cloud and radiation physics in global climate models in order to improve the climate simulation capabilities of these models. ARM data is collected both through permanent monitoring stations and field campaigns around the world. Airborne measurements required to answer science questions from researchers or to validate ground data are also collected. To find data from all categories of aerial operations, follow the links from the AAF information page at http://www.arm.gov/sites/aaf. Tables of information will provide start dates, duration, lead scientist, and the research site for each of the named campaigns. The title of a campaign leads, in turn, to a project description, contact information, and links to the data. Users will be requested to create a password, but the data files are free for viewing and downloading. The ARM Archive physically resides at the Oak Ridge National Laboratory.

  6. Lightweight photovoltaic module development for unmanned aerial vehicles

    SciTech Connect (OSTI)

    Nowlan, M.J.; Maglitta, J.C.; Lamp, T.R.

    1998-07-01

    Lightweight photovoltaic modules are being developed for powering high altitude unmanned aerial vehicles (UAVs). Terrestrial crystalline silicon solar cell and module technologies are being applied to minimize module cost, with modifications to improve module specific power (W/kg) and power density (W/m{sup 2}). New module processes are being developed for assembling standard thickness (320 mm) and thin (125 mm) solar cells, thin (50 to 100 mm) encapsulant films, and thin (25 mm) cover films. In comparison, typical terrestrial modules use 300 to 400 mm thick solar cells, 460 mm thick encapsulants, and 3.2 mm thick glass covers. The use of thin, lightweight materials allows the fabrication of modules with specific powers ranging from 120 to 200 W/kg, depending on cell thickness and efficiency, compared to 15 W/kg or less for conventional terrestrial modules. High efficiency designs based on ultra-thin (5 mm) GaAs cells have also been developed, with the potential for achieving substantially higher specific powers. Initial design, development, and module assembly work is completed. Prototype modules were fabricated in sizes up to 45 cm x 99 cm. Module materials and processes are being evaluated through accelerated environmental testing, including thermal cycling, humidity-freeze cycling, mechanical cycling, and exposure to UV and visible light.

  7. Aerial Measuring System Technical Integration Annual Report 2002

    SciTech Connect (OSTI)

    Bechtel Nevada Remote Sensing Laboratory

    2003-06-01

    Fiscal Year 2002 is the second year of a five-year commitment by the U.S. Department of Energy, National Nuclear Security Administration (NNSA) to invest in development of new and state-of-the-art technologies for the Aerial Measuring Systems (AMS) project. In 2000, NNSA committed to two million dollars for AMS Technical Integration (TI) for each of five years. The tragedy of September 11, 2001, profoundly influenced the program. NNSA redirected people and funding resources at the Remote Sensing Laboratory (RSL) to more immediate needs. Funds intended for AMS TI were redirected to NNSA's new posture of leaning further forward throughout. AMS TI was brought to a complete halt on December 10, 2001. Then on April 30, 2002, NNSA Headquarters allowed the restart of AMS TI at the reduced level of $840,000. The year's events resulted in a slow beginning of several projects, some of which were resumed only a few weeks before the AMS TI Symposium held at RSL on July 30.

  8. Radiometric and geometric analysis of hyperspectral imagery acquired from an unmanned aerial vehicle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hruska, Ryan; Mitchell, Jessica; Anderson, Matthew; Glenn, Nancy F.

    2012-09-17

    During the summer of 2010, an Unmanned Aerial Vehicle (UAV) hyperspectral in-flight calibration and characterization experiment of the Resonon PIKA II imaging spectrometer was conducted at the U.S. Department of Energy’s Idaho National Laboratory (INL) UAV Research Park. The purpose of the experiment was to validate the radiometric calibration of the spectrometer and determine the georegistration accuracy achievable from the on-board global positioning system (GPS) and inertial navigation sensors (INS) under operational conditions. In order for low-cost hyperspectral systems to compete with larger systems flown on manned aircraft, they must be able to collect data suitable for quantitative scientific analysis.more » The results of the in-flight calibration experiment indicate an absolute average agreement of 96.3%, 93.7% and 85.7% for calibration tarps of 56%, 24%, and 2.5% reflectivity, respectively. The achieved planimetric accuracy was 4.6 meters (based on RMSE).« less

  9. Utilization of Local Law Enforcement Aerial Resources in Consequence Management (CM) Response

    SciTech Connect (OSTI)

    Wasiolek, Piotr T.; Malchow, Russell L.

    2013-03-12

    During the past decade the U.S. Department of Homeland Security (DHS) was instrumental in enhancing the nation’s ability to detect and prevent a radiological or nuclear attack in the highest risk cities. Under the DHS Securing the Cities initiative, nearly 13,000 personnel in the New York City region have been trained in preventive radiological and nuclear detection operations, and nearly 8,500 pieces of radiological detection equipment have been funded. As part of the preventive radiological/nuclear detection (PRND) mission, several cities have received funding to purchase commercial aerial radiation detection systems. In 2008, the U.S. Department of Energy, National Nuclear Security Administration Aerial Measuring System (AMS) program started providing Mobile Aerial Radiological Surveillance (MARS) training to such assets, resulting in over 150 HAZMAT teams’ officers and pilots from 10 law enforcement organizations and fire departments being trained in the aerial radiation detection. From the beginning, the MARS training course covered both the PRND and consequence management (CM) missions. Even if the law enforcement main focus is PRND, their aerial assets can be utilized in the collection of initial radiation data for post-event radiological CM response. Based on over 50 years of AMS operational experience and information collected during MARS training, this presentation will focus on the concepts of CM response using aerial assets as well as utilizing law enforcement/fire department aerial assets in CM. Also discussed will be the need for establishing closer relationships between local jurisdictions’ aerial radiation detection capabilities and state and local radiation control program directors, radiological health department managers, etc. During radiological events these individuals may become primary experts/advisers to Incident Commanders for radiological emergency response, especially in the early stages of a response. The knowledge of the existence, specific capabilities, and use of local aerial radiation detection systems would be critical in planning the response, even before federal assets arrive on the scene. The relationship between local and federal aerial assets and the potential role for the further use of the MARS training and expanded AMS Reachback capabilities in facilitating such interactions will be discussed.

  10. Photovoltaic electric power applied to Unmanned Aerial Vehicles (UAV)

    SciTech Connect (OSTI)

    Geis, J.; Arnold, J.H.

    1994-09-01

    Photovoltaic electric-powered flight is receiving a great deal of attention in the context of the United States` Unmanned Aerial Vehicle (UAV) program. This paper addresses some of the enabling technical areas and their potential solutions. Of particular interest are the long-duration, high-altitude class of UAV`s whose mission it is to achieve altitudes between 60,000 and 100,000 feet, and to remain at those altitudes for prolonged periods performing various mapping and surveillance activities. Addressed herein are studies which reveal the need for extremely light-weight and efficient solar cells, high-efficiency electric motor-driven propeller modules, and power management and distribution control elements. Since the potential payloads vary dramatically in their power consumption and duty cycles, a typical load profile has been selected to provide commonality for the propulsion power comparisons. Since missions vary widely with respect to ground coverage requirements, from repeated orbiting over a localized target to long-distance routes over irregular terrain, the authors have also averaged the power requirements for on-board guidance and control power, as well as ground control and communication link utilization. In the context of the national technology reinvestment program, wherever possible they modeled components and materials which have been qualified for space and defense applications, yet are compatible with civilian UAV activities. These include, but are not limited to, solar cell developments, electric storage technology for diurnal operation, local and ground communications, power management and distribution, and control servo design. And finally, the results of tests conducted by Wright Laboratory on ultralight, highly efficient MOCVD GaAs solar cells purchased from EPI Materials Ltd. (EML) of the UK are presented. These cells were also used for modeling the flight characteristics of UAV aircraft.

  11. Evaluation of Bare Ground on Rangelands using Unmanned Aerial Vehicles

    SciTech Connect (OSTI)

    Robert P. Breckenridge; Maxine Dakins

    2011-01-01

    Attention is currently being given to methods that assess the ecological condition of rangelands throughout the United States. There are a number of different indicators that assess ecological condition of rangelands. Bare Ground is being considered by a number of agencies and resource specialists as a lead indicator that can be evaluated over a broad area. Traditional methods of measuring bare ground rely on field technicians collecting data along a line transect or from a plot. Unmanned aerial vehicles (UAVs) provide an alternative to collecting field data, can monitor a large area in a relative short period of time, and in many cases can enhance safety and time required to collect data. In this study, both fixed wing and helicopter UAVs were used to measure bare ground in a sagebrush steppe ecosystem. The data were collected with digital imagery and read using the image analysis software SamplePoint. The approach was tested over seven different plots and compared against traditional field methods to evaluate accuracy for assessing bare ground. The field plots were located on the Idaho National Laboratory (INL) site west of Idaho Falls, Idaho in locations where there is very little disturbance by humans and the area is grazed only by wildlife. The comparison of fixed-wing and helicopter UAV technology against field estimates shows good agreement for the measurement of bare ground. This study shows that if a high degree of detail and data accuracy is desired, then a helicopter UAV may be a good platform. If the data collection objective is to assess broad-scale landscape level changes, then the collection of imagery with a fixed-wing system is probably more appropriate.

  12. Aerial Survey Results for 131I Deposition on the Ground after the Fukushima Daiichi Nuclear Power Plant Accident

    SciTech Connect (OSTI)

    Torii, Tatsuo; Sugita, Takeshi; Okada, Colin E.; Reed, Michael S.; Blumenthal, Daniel J.

    2013-08-01

    In March 2011 the second largest accidental release of radioactivity in history occurred at the Fukushima Daiichi nuclear power plant following a magnitude 9.0 earthquake and subsequent tsunami. Teams from the U.S. Department of Energy, National Nuclear Security Administration Office of Emergency Response performed aerial surveys to provide initial maps of the dispersal of radioactive material in Japan. The initial results from the surveys did not report the concentration of 131I. This work reports on analyses performed on the initial survey data by a joint Japan-US collaboration to determine 131I ground concentration. This information is potentially useful in reconstruction of the inhalation and external exposure doses from this short-lived radionuclide. The deposited concentration of 134Cs is also reported.

  13. Numerical modeling of aerial bursts and ablation melting of Libyan desert

    Office of Scientific and Technical Information (OSTI)

    glass. (Conference) | SciTech Connect Numerical modeling of aerial bursts and ablation melting of Libyan desert glass. Citation Details In-Document Search Title: Numerical modeling of aerial bursts and ablation melting of Libyan desert glass. No abstract prepared. Authors: Boslough, Mark Bruce Elrick Publication Date: 2006-07-01 OSTI Identifier: 892766 Report Number(s): SAND2006-4263C TRN: US200623%%501 DOE Contract Number: AC04-94AL85000 Resource Type: Conference Resource Relation:

  14. LM 28-14 | Department of Energy

    Energy Savers [EERE]

    8-14 LM 28-14 NEPA ID: LM 28-14. Short Title: Aerial Photography and Topographic Mapping of the Weldon Spring, Missouri, Site. Determination: B3.2 PDF icon LM 28-14 More Documents & Publications CX-013312: Categorical Exclusion Determination CX-013695: Categorical Exclusion Determination CX-007901

  15. Investigation of an MLE Algorithm for Quantification of Aerial Radiological Measurements

    SciTech Connect (OSTI)

    Reed, Michael; Essex, James

    2012-05-10

    Aerial radiation detection is routinely used by many organizations (DHS, DOE, EPA, etc.) for the purposes of identifying the presence of and quantifying the existence of radiation along the ground. This work involves the search for lost or missing sources, as well as the characterization of large-scale releases such as might occur in a nuclear power plant accident. The standard in aerial radiological surveys involves flying large arrays of sodium-iodide detectors at altitude (15 to 700 meters) to acquire geo-referenced, 1 Hz, 1024-channel spectra. The historical shortfalls of this technology include: Very low spatial resolution (typical field of view is circle of two-times altitude) Relatively low detectability associated with large stand-off distances Fundamental challenges in performing ground-level quantification This work uses modern computational power in conjunction with multi-dimensional deconvolution algorithms in an effort to improve spatial resolution, enhance detectability, and provide a robust framework for quantification.

  16. Bag of Lines (BoL) for Improved Aerial Scene Representation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sridharan, Harini; Cheriyadat, Anil M.

    2014-09-22

    Feature representation is a key step in automated visual content interpretation. In this letter, we present a robust feature representation technique, referred to as bag of lines (BoL), for high-resolution aerial scenes. The proposed technique involves extracting and compactly representing low-level line primitives from the scene. The compact scene representation is generated by counting the different types of lines representing various linear structures in the scene. Through extensive experiments, we show that the proposed scene representation is invariant to scale changes and scene conditions and can discriminate urban scene categories accurately. We compare the BoL representation with the popular scalemore » invariant feature transform (SIFT) and Gabor wavelets for their classification and clustering performance on an aerial scene database consisting of images acquired by sensors with different spatial resolutions. The proposed BoL representation outperforms the SIFT- and Gabor-based representations.« less

  17. Aerial Neutron Detection: Neutron Signatures for Nonproliferation and Emergency Response Applications

    SciTech Connect (OSTI)

    Maurer, Richard J.; Stampahar, Thomas G.; Smith, Ethan X.; Mukhopadhyay, Sanjoy; Wolff, Ronald S.; Rourke, Timothy J.; LeDonne, Jeffrey P.; Avaro, Emanuele; Butler, D. Andre; Borders, Kevin L.; Stampahar, Jezabel; Schuck, William H.; Selfridge, Thomas L.; McKissack, Thomas M.; Duncan, William W.; Hendricks, Thane J.

    2012-10-17

    From 2007 to the present, the Remote Sensing Laboratory has been conducting a series of studies designed to expand our fundamental understanding of aerial neutron detection with the goal of designing an enhanced sensitivity detection system for long range neutron detection. Over 35 hours of aerial measurements in a helicopter were conducted for a variety of neutron emitters such as neutron point sources, a commercial nuclear power reactor, nuclear reactor spent fuel in dry cask storage, depleted uranium hexafluoride and depleted uranium metal. The goals of the project were to increase the detection sensitivity of our instruments such that a 5.4 × 104 neutron/second source could be detected at 100 feet above ground level at a speed of 70 knots and to enhance the long-range detection sensitivity for larger neutron sources, i.e., detection ranges above 1000 feet. In order to increase the sensitivity of aerial neutron detection instruments, it is important to understand the dynamics of the neutron background as a function of altitude. For aerial neutron detection, studies have shown that the neutron background primarily originates from above the aircraft, being produced in the upper atmosphere by galactic cosmic-ray interactions with air molecules. These interactions produce energetic neutrons and charged particles that cascade to the earth’s surface, producing additional neutrons in secondary collisions. Hence, the neutron background increases as a function of altitude which is an impediment to long-range neutron detection. In order to increase the sensitivity for long range detection, it is necessary to maintain a low neutron background as a function of altitude. Initial investigations show the variation in the neutron background can be decreased with the application of a cosmic-ray shield. The results of the studies along with a representative data set are presented.

  18. An aerial radiological survey of the Fernald Environmental Management Project and surrounding area, Fernald, Ohio

    SciTech Connect (OSTI)

    Phoenix, K.A.

    1997-04-01

    An aerial radiological survey was conducted from May 17--22, 1994, over a 36 square mile (93 square kilometer) area centered on the Fernald Environmental Management Project located in Fernald, Ohio. The purpose of the survey was to detect anomalous gamma radiation in the environment surrounding the plant. The survey was conducted at a nominal altitude of 150 feet (46 meters) with a line spacing of 250 feet (76 meters). A contour map of the terrestrial gamma exposure rate extrapolated to 1 meter (3.3 feet) above ground was prepared and overlaid on an aerial photograph of the area. Analysis of the data for man made sources showed five sites within the boundaries of the Fernald Environmental Management Project having elevated readings. The exposure rates outside the plant boundary were typical of naturally occurring background radiation. Soil samples and pressurized ion chamber measurements were obtained at four locations within the survey boundaries to supplement the aerial data. It was concluded that although the radionuclides identified in the high-exposure-rate areas are naturally occurring, the levels encountered are greatly enhanced due to industrial activities at the plant.

  19. LM 13-14 | Department of Energy

    Energy Savers [EERE]

    3-14 LM 13-14 NEPA ID: LM 13-14 Determination: B3.2LM 13-14 Short Title: Aerial photography and mapping of the Gunnison, Colorado, Processing Site. PDF icon LM 13-14 More Documents & Publications LM 17-15 LM 06

  20. Assess the Efficacy of an Aerial Distant Observer Tool Capable of Rapid Analysis of Large Sections of Collector Fields: FY 2008 CSP Milestone Report, September 2008

    SciTech Connect (OSTI)

    Jorgensen, G.; Burkholder, F.; Gray, A.; Wendelin, T.

    2009-02-01

    We assessed the feasibility of developing an aerial Distant Observer optical characterization tool for collector fields in concentrating solar power plants.

  1. CX-000552: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Aerial Saw Tree TrimmingCX(s) Applied: B1.3Date: 11/30/2009Location(s): ArkansasOffice(s): Southwestern Power Administration

  2. Design of a GaAs/Ge solar array for unmanned aerial vehicles

    SciTech Connect (OSTI)

    Scheiman, D.A.; Colozza, A.J.; Brinker, D.J.; Bents, D.J.

    1994-12-31

    Unmanned Aerial Vehicles (UAV) are being proposed for many applications including surveillance, mapping and atmospheric studies. These applications require a lightweight, low speed, medium to long duration airplane. Due to the weight, speed, and altitude constraints imposed on such aircraft, solar array generated electric power is a viable alternative to air-breathing engines. Development of such aircraft is currently being funded under the Environmental Research Aircraft and Sensor Technology (ERAST) program. NASA Lewis Research Center (LeRC) is currently building a Solar Electric Airplane to demonstrate UAV technology. This aircraft utilizes high efficiency Applied Solar Energy Corporation (ASEC) GaAs/Ge space solar cells. The cells have been provided by the Air Force through the ManTech Office. Expected completion of the plane is early 1995, with the airplane currently undergoing flight testing using battery power.

  3. Design of a GaAs/Ge solar array for unmanned aerial vehicles

    SciTech Connect (OSTI)

    Scheiman, D.A.; Brinker, D.J.; Bents, D.J.; Colozza, A.J.

    1995-03-01

    Unmanned Aerial Vehicles (UAV) are being proposed for many applications including surveillance, mapping and atmospheric studies. These applications require a lightweight, low speed, medium to long duration airplane. Due to the weight, speed, and altitude constraints imposed on such aircraft, solar array generated electric power is a viable alternative to air-breathing engines. Development of such aircraft is currently being funded under the Environmental Research Aircraft and Sensor Technology (ERAST) program. NASA Lewis Research Center (LeRC) is currently building a Solar Electric Airplane to demonstrate UAV technology. This aircraft utilizes high efficiency Applied Solar Energy Corporation (ASEC) GaAs/Ge space solar cells. The cells have been provided by the Air Force through the ManTech Office. Expected completion of the plane is early 1995, with the airplane currently undergoing flight testing using battery power.

  4. Mathematical model of unmanned aerial vehicle used for endurance autonomous monitoring

    SciTech Connect (OSTI)

    Chelaru, Teodor-Viorel; Chelaru, Adrian

    2014-12-10

    The paper purpose is to present some aspects regarding the control system of unmanned aerial vehicle - UAV, used to local observations, surveillance and monitoring interest area. The calculus methodology allows a numerical simulation of UAV evolution in bad atmospheric conditions by using nonlinear model, as well as a linear one for obtaining guidance command. The UAV model which will be presented has six DOF (degrees of freedom), and autonomous control system. This theoretical development allows us to build stability matrix, command matrix and control matrix and finally to analyse the stability of autonomous UAV flight. A robust guidance system, based on uncoupled state will be evaluated for different fly conditions and the results will be presented. The flight parameters and guidance will be analysed.

  5. Aerial Measuring System (AMS)/Israel Atomic Energy Commission (IAEC) Joint Comparison Study Report

    SciTech Connect (OSTI)

    Wasiolek, P.; Halevy, I.

    2013-12-23

    Under the 13th Bilateral Meeting to Combat Nuclear Terrorism conducted on January 8–9, 2013, the committee approved the development of a cost-effective proposal to conduct a Comparison Study of the Aerial Measuring System (AMS) of the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) and Israel Atomic Energy Commission (IAEC). The study was to be held at the Remote Sensing Laboratory (RSL), Nellis Air Force Base, Las Vegas, Nevada, with measurements at the Nevada National Security Site (NNSS). The goal of the AMS and the IAEC joint survey was to compare the responses of the two agencies’ aerial radiation detection systems to varied radioactive surface contamination levels and isotopic composition experienced at the NNSS, and the differing data processing techniques utilized by the respective teams. Considering that for the comparison both teams were using custom designed and built systems, the main focus of the short campaign was to investigate the impact of the detector size and data analysis techniques used by both teams. The AMS system, SPectral Advanced Radiological Computer System, Model A (SPARCS-A), designed and built by RSL, incorporates four different size sodium iodide (NaI) crystals: 1" × 1", 2" × 4" × 4", 2" × 4" ×16", and an “up-looking” 2" × 4" × 4". The Israel AMS System, Air RAM 2000, was designed by the IAEC Nuclear Research Center – Negev (NRCN) and built commercially by ROTEM Industries (Israel) and incorporates two 2" diameter × 2" long NaI crystals. The operational comparison was conducted at RSL-Nellis in Las Vegas, Nevada, during week of June 24–27, 2013. The Israeli system, Air RAM 2000, was shipped to RSL-Nellis and mounted together with the DOE SPARCS on a DOE Bell-412 helicopter for a series of aerial comparison measurements at local test ranges, including the Desert Rock Airport and Area 3 at the NNSS. A 4-person Israeli team from the IAEC NRCN supported the activity together with 11 members of the RSL team, which consisted of pilots, mechanics, scientists, a data analyst, equipment operators, and operation specialists. All planned flight activities followed by scientific discussions on the collected data were completed. For IAEC, the joint survey provided an opportunity to characterize their system’s response to extended sources of various fission products at the NNSS. As both systems play an important role in their respective countries’ (United States and Israel) national framework of radiological emergency response and are subject to multiple mutual cooperation agreements, it was important for each country to obtain more thorough knowledge of how they would employ these important assets and define the roles that they would each play in an actual response.

  6. An aerial radiological survey of the West Valley Demonstration Project and surrounding area, West Valley, New York

    SciTech Connect (OSTI)

    Berry, H.A.

    1991-09-01

    An aerial radiological survey of the West Valley Demonstration Project and the surrounding area was conducted from mid-August through early September 1984 by EG G Energy Measurements, Inc. for the United States Department of Energy. The radiological survey was part of the United States Department of Energy Comprehensive Integrated Remote Sensing (CIRS) program, which provides state-of-the-art remote sensing to support the needs of the various DOE facilities. The survey consisted of airborne measurements of both natural and man-made gamma radiation emanating from the terrestrial surface. These measurements allowed an estimate of the distribution of isotopic concentrations in the area surrounding the project site. Results are reported as isopleths superimposed on aerial photographs of the area. Gamma ray energy spectra are also presented for the net man-made radionuclides. 8 refs., 16 figs., 9 tabs.

  7. Lower Sioux Indian Community Wind Energy Development

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to overlay the Lower Sioux Community with digital data pertaining to: - Aerial photography - Wind resource - Land use - Physical infrastructure - Communications infrastructure ...

  8. the Central Basin Platform,

    Office of Scientific and Technical Information (OSTI)

    ... high altitude, stereoscopic aerial photography. The study was limited to Ector County. ... These digital files were overlaid with linear features data, basement block ...

  9. Internal air flow analysis of a bladeless micro aerial vehicle hemisphere body using computational fluid dynamic

    SciTech Connect (OSTI)

    Othman, M. N. K. E-mail: zuradzman@unimap.edu.my E-mail: khairunizam@unimap.edu.my E-mail: s.yaacob@unimap.edu.my E-mail: abadal@unimap.edu.my; Zuradzman, M. Razlan E-mail: zuradzman@unimap.edu.my E-mail: khairunizam@unimap.edu.my E-mail: s.yaacob@unimap.edu.my E-mail: abadal@unimap.edu.my; Hazry, D. E-mail: zuradzman@unimap.edu.my E-mail: khairunizam@unimap.edu.my E-mail: s.yaacob@unimap.edu.my E-mail: abadal@unimap.edu.my; Khairunizam, Wan E-mail: zuradzman@unimap.edu.my E-mail: khairunizam@unimap.edu.my E-mail: s.yaacob@unimap.edu.my E-mail: abadal@unimap.edu.my; Shahriman, A. B. E-mail: zuradzman@unimap.edu.my E-mail: khairunizam@unimap.edu.my E-mail: s.yaacob@unimap.edu.my E-mail: abadal@unimap.edu.my; Yaacob, S. E-mail: zuradzman@unimap.edu.my E-mail: khairunizam@unimap.edu.my E-mail: s.yaacob@unimap.edu.my E-mail: abadal@unimap.edu.my; Ahmed, S. Faiz E-mail: zuradzman@unimap.edu.my E-mail: khairunizam@unimap.edu.my E-mail: s.yaacob@unimap.edu.my E-mail: abadal@unimap.edu.my; and others

    2014-12-04

    This paper explain the analysis of internal air flow velocity of a bladeless vertical takeoff and landing (VTOL) Micro Aerial Vehicle (MAV) hemisphere body. In mechanical design, before produce a prototype model, several analyses should be done to ensure the product's effectiveness and efficiency. There are two types of analysis method can be done in mechanical design; mathematical modeling and computational fluid dynamic. In this analysis, I used computational fluid dynamic (CFD) by using SolidWorks Flow Simulation software. The idea came through to overcome the problem of ordinary quadrotor UAV which has larger size due to using four rotors and the propellers are exposed to environment. The bladeless MAV body is designed to protect all electronic parts, which means it can be used in rainy condition. It also has been made to increase the thrust produced by the ducted propeller compare to exposed propeller. From the analysis result, the air flow velocity at the ducted area increased to twice the inlet air. This means that the duct contribute to the increasing of air velocity.

  10. Concept and realization of unmanned aerial system with different modes of operation

    SciTech Connect (OSTI)

    Czyba, Roman; Szafra?ski, Grzegorz; Janusz, Wojciech; Niezabitowski, Micha?; Czornik, Adam; B?achuta, Marian

    2014-12-10

    In this paper we describe the development process of unmanned aerial system, its mechanical components, electronics and software solutions. During the stage of design, we have formulated some necessary requirements for the multirotor vehicle and ground control station in order to build an optimal system which can be used for the reconnaissance missions. Platform is controlled by use of the ground control station (GCS) and has possibility of accomplishing video based observation tasks. In order to fulfill this requirement the on-board payload consists of mechanically stabilized camera augmented with machine vision algorithms to enable object tracking tasks. Novelty of the system are four modes of flight, which give full functionality of the developed UAV system. Designed ground control station is consisted not only of the application itself, but also a built-in dedicated components located inside the chassis, which together creates an advanced UAV system supporting the control and management of the flight. Mechanical part of quadrotor is designed to ensure its robustness while meeting objectives of minimizing weight of the platform. Finally the designed electronics allows for implementation of control and estimation algorithms without the needs for their excessive computational optimization.

  11. Design of a reconfigurable liquid hydrogen fuel tank for use in the Genii unmanned aerial vehicle

    SciTech Connect (OSTI)

    Adam, Patrick; Leachman, Jacob

    2014-01-29

    Long endurance flight, on the order of days, is a leading flight performance characteristic for Unmanned Aerial Vehicles (UAVs). Liquid hydrogen (LH2) is well suited to providing multi-day flight times with a specific energy 2.8 times that of conventional kerosene based fuels. However, no such system of LH2 storage, delivery, and use is currently available for commercial UAVs. In this paper, we develop a light weight LH2 dewar for integration and testing in the proton exchange membrane (PEM) fuel cell powered, student designed and constructed, Genii UAV. The fuel tank design is general for scaling to suit various UAV platforms. A cylindrical vacuum-jacketed design with removable end caps was chosen to incorporate various fuel level gauging, pressurizing, and slosh mitigation systems. Heat and mechanical loadings were modeled to compare with experimental results. Mass performance of the fuel tank is characterized by the fraction of liquid hydrogen to full tank mass, and the insulation performance was characterized by effective thermal conductivity and boil-off rate.

  12. Combined planar imaging of schlieren photography with OH-LIPF and spontaneous OH-emission in a 2-D valveless pulse combustor

    SciTech Connect (OSTI)

    Ishino, Yojiro; Hasegawa, Tatsuya; Yamaguchi, Shigeki; Ohiwa, Norio

    1999-07-01

    Using a novel optical system, simultaneous imaging of schlieren photography and laser induced predissociation fluorescence of OH radicals (OH-LIPF) have been carried out to examine combustion processes and flame structure in a two-dimensional valveless pulse combustor. Simultaneous imaging of schlieren photographs and spontaneous OH-emission have also been made, in order to obtain information on the behavior of the flame front during a cycle of pulsation. The pulse combustor used in this experiment consists of a combustion chamber of a volume of 125 cm{sup 3} and a tailpipe of a length of 976 mm, which is followed by an automobile muffler. The fuel used is commercial grade gaseous propane.

  13. CX-013695: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Unmanned Aerial System Support to Idaho State University CX(s) Applied: B3.2Date: 03/16/2015 Location(s): IdahoOffices(s): Idaho Operations Office

  14. Biological investigations of the Sandia National Laboratories Sol se Mete Aerial Cable Facility

    SciTech Connect (OSTI)

    Sullivan, R.M.

    1994-10-01

    This report provides results of a comprehensive biological field survey performed on the Sandia National Laboratories Aerial Cable Facility, at the east end of Kirtland Air Force Base (KAFB), Bernalillo County, New Mexico. This survey was conducted late September through October, 1991. ACF occupies a 440-acre tract of land withdrawn by the US Forest Service (USFS) for use by KAFB, and in turn placed under operational control of SNL by the Department of Energy (DOE). All land used by SNL for ACF is part of a 15,851-acre tract of land withdrawn by the US Forest Service. In addition, a number of different organizations use the 15,851-acre area. The project area used by SNL encompasses portions of approximately six sections (3,840 acres) of US Forest Service land located within the foothills of the west side of the Manzano Mountains (East Mesa). The biological study area is used by the KAFB, the US Department of Interior, and SNL. This area includes: (1) Sol se Mete Springs and Canyon, (2) East Anchor Access Road, (3) East Anchor Site, (4) Rocket Sled Track, (5) North Arena, (6) East Instrumentation Site and Access Road, (7) West Anchor Access Road, (8) West Anchor Site, (9) South Arena, (10) Winch Sites, (11) West Instrumentation Sites, (12) Explosive Assembly Building, (13) Control Building, (14) Lurance Canyon Road and vicinity. Although portions of approximately 960 acres of withdrawn US Forest Service land have been altered, only 700 acres have been disturbed by activities associated with ACF; approximately 2,880 acres consist of natural habitat. Absence of grazing by livestock and possibly native ungulates, and relative lack of human disturbance have allowed this area to remain in a more natural vegetative state relative to the condition of private range lands throughout New Mexico. This report evaluates threatened and endangered species found on ACF, as well as a comprehensive assessment of biological habitats.

  15. Using Unmanned Aerial Vehicles to Assess Vegetative Cover in Sagebrush Steppe Ecosytstems

    SciTech Connect (OSTI)

    Robert P. Breckenridge

    2005-09-01

    The Idaho National Laboratory (INL), in conjunction with the University of Idaho, is evaluating novel approaches for using unmanned aerial vehicles (UAVs) as a quicker and safer method for monitoring biotic resources. Evaluating vegetative cover is an important factor in understanding the sustainability of many ecosystems. In assessing vegetative cover, methods that improve accuracy and cost efficiency could revolutionize how biotic resources are monitored on western federal lands. Sagebrush steppe ecosystems provide important habitat for a variety of species, some of which are important indicator species (e.g., sage grouse). Improved methods are needed to support monitoring these habitats because there are not enough resource specialists or funds available for comprehensive ground evaluation of these ecosystems. In this project, two types of UAV platforms (fixed wing and helicopter) were used to collect still-frame imagery to assess cover in sagebrush steppe ecosystems. This paper discusses the process for collecting and analyzing imagery from the UAVs to (1) estimate total percent cover, (2) estimate percent cover for six different types of vegetation, and (3) locate sage grouse based on representative decoys. The field plots were located on the INL site west of Idaho Falls, Idaho, in areas with varying amounts and types of vegetative cover. A software program called SamplePoint developed by the U.S. Department of Agriculture, Agricultural Research Service (USDA-ARS) was used to evaluate the imagery for percent cover for the six vegetation types (bare ground, litter, shrubs, dead shrubs, grasses, and forbs). Results were compared against standard field measurements to assess accuracy.

  16. Comparison of Unmanned Aerial Vehicle Platforms for Assessing Vegetation Cover in Sagebrush Steppe Ecosystems

    SciTech Connect (OSTI)

    Robert P. Breckenridge; Maxine Dakins; Stephen Bunting; Jerry Harbour; Sera White

    2011-09-01

    In this study, the use of unmanned aerial vehicles (UAVs) as a quick and safe method for monitoring biotic resources was evaluated. Vegetation cover and the amount of bare ground are important factors in understanding the sustainability of many ecosystems and assessment of rangeland health. Methods that improve speed and cost efficiency could greatly improve how biotic resources are monitored on western lands. Sagebrush steppe ecosystems provide important habitat for a variety of species (including sage grouse and pygmy rabbit). Improved methods are needed to support monitoring these habitats because there are not enough resource specialists or funds available for comprehensive ground evaluations. In this project, two UAV platforms, fixed wing and helicopter, were used to collect still-frame imagery to assess vegetation cover in sagebrush steppe ecosystems. This paper discusses the process for collecting and analyzing imagery from the UAVs to (1) estimate percent cover for six different vegetation types (shrub, dead shrub, grass, forb, litter, and bare ground) and (2) locate sage grouse using representative decoys. The field plots were located on the Idaho National Engineering (INL) site west of Idaho Falls, Idaho, in areas with varying amounts and types of vegetation cover. A software program called SamplePoint was used along with visual inspection to evaluate percent cover for the six cover types. Results were compared against standard field measurements to assess accuracy. The comparison of fixed-wing and helicopter UAV technology against field estimates shows good agreement for the measurement of bare ground. This study shows that if a high degree of detail and data accuracy is desired, then a helicopter UAV may be a good platform to use. If the data collection objective is to assess broad-scale landscape level changes, then the collection of imagery with a fixed-wing system is probably more appropriate.

  17. Damage prognosis of adhesively-bonded joints in laminated composite structural components of unmanned aerial vehicles

    SciTech Connect (OSTI)

    Farrar, Charles R; Gobbato, Maurizio; Conte, Joel; Kosmatke, John; Oliver, Joseph A

    2009-01-01

    The extensive use of lightweight advanced composite materials in unmanned aerial vehicles (UAVs) drastically increases the sensitivity to both fatigue- and impact-induced damage of their critical structural components (e.g., wings and tail stabilizers) during service life. The spar-to-skin adhesive joints are considered one of the most fatigue sensitive subcomponents of a lightweight UAV composite wing with damage progressively evolving from the wing root. This paper presents a comprehensive probabilistic methodology for predicting the remaining service life of adhesively-bonded joints in laminated composite structural components of UAVs. Non-destructive evaluation techniques and Bayesian inference are used to (i) assess the current state of damage of the system and, (ii) update the probability distribution of the damage extent at various locations. A probabilistic model for future loads and a mechanics-based damage model are then used to stochastically propagate damage through the joint. Combined local (e.g., exceedance of a critical damage size) and global (e.g.. flutter instability) failure criteria are finally used to compute the probability of component failure at future times. The applicability and the partial validation of the proposed methodology are then briefly discussed by analyzing the debonding propagation, along a pre-defined adhesive interface, in a simply supported laminated composite beam with solid rectangular cross section, subjected to a concentrated load applied at mid-span. A specially developed Eliler-Bernoulli beam finite element with interlaminar slip along the damageable interface is used in combination with a cohesive zone model to study the fatigue-induced degradation in the adhesive material. The preliminary numerical results presented are promising for the future validation of the methodology.

  18. Operation Greenhouse. Scientific Director's report of atomic weapon tests at Eniwetok, 1951. Annex 1. 6, blast measurements. Part 3. Pressure near ground level. Section 4. Blast asymmetry from aerial photographs. Section 5. Ball-crusher-gauge measurements of peak pressure

    SciTech Connect (OSTI)

    Not Available

    1985-04-01

    Aerial motion pictures from manned aircraft were taken of the Dog, Easy, and George Shots and from a drone aircraft on Dog Shot to determine whether asymmetries in the blast waves could be detected and measured. Only one film, that taken of Dog Shot from a drone, was considered good enough to warrant detailed analysis, but this failed to yield any positive information on asymmetries. The analysis showed that failure to obtain good arrival-time data arose from a number of cases, but primarily from uncertainities in magnification and timing. Results could only be matched with reliable data from blast-velocity switches by use of large corrections. Asymnetries, if present, were judged to have been too small or to have occurred too early to be detected with the slow-frame speed used. Recommendations for better results include locating the aircraft directly overhead at the time of burst and using a camera having greater frame speed and provided with timing marks.

  19. CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OF PROPOSED ACTION: Southwestern Power Administration proposes to perform aerial saw tree trimming activities along select portions of transmission line rights-of-ways located...

  20. USE OF THE AERIAL MEASUREMENT SYSTEM HELICOPTER EMERGENCY RESPONSE ACQUISITION SYSTEMS WITH GEOGRAPHIC INFORMATION SYSTEM FOR RADIOACTIVE SOIL REMEDIATION - [11504

    SciTech Connect (OSTI)

    BROCK CT

    2011-02-15

    The Aerial Measurement System (AMS) Helicopter Emergency Response Acquisition System provides a thorough and economical means to identify and characterize the contaminants for large area radiological surveys. The helicopter system can provide a 100-percent survey of an area that qualifies as a scoping survey under the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) methodology. If the sensitivity is adequate when compared to the clean up values, it may also be used for the characterization survey. The data from the helicopter survey can be displayed and manipulated to provide invaluable data during remediation activities.

  1. Error Detection, Factorization and Correction for Multi-View Scene Reconstruction from Aerial Imagery

    SciTech Connect (OSTI)

    Hess-Flores, M

    2011-11-10

    Scene reconstruction from video sequences has become a prominent computer vision research area in recent years, due to its large number of applications in fields such as security, robotics and virtual reality. Despite recent progress in this field, there are still a number of issues that manifest as incomplete, incorrect or computationally-expensive reconstructions. The engine behind achieving reconstruction is the matching of features between images, where common conditions such as occlusions, lighting changes and texture-less regions can all affect matching accuracy. Subsequent processes that rely on matching accuracy, such as camera parameter estimation, structure computation and non-linear parameter optimization, are also vulnerable to additional sources of error, such as degeneracies and mathematical instability. Detection and correction of errors, along with robustness in parameter solvers, are a must in order to achieve a very accurate final scene reconstruction. However, error detection is in general difficult due to the lack of ground-truth information about the given scene, such as the absolute position of scene points or GPS/IMU coordinates for the camera(s) viewing the scene. In this dissertation, methods are presented for the detection, factorization and correction of error sources present in all stages of a scene reconstruction pipeline from video, in the absence of ground-truth knowledge. Two main applications are discussed. The first set of algorithms derive total structural error measurements after an initial scene structure computation and factorize errors into those related to the underlying feature matching process and those related to camera parameter estimation. A brute-force local correction of inaccurate feature matches is presented, as well as an improved conditioning scheme for non-linear parameter optimization which applies weights on input parameters in proportion to estimated camera parameter errors. Another application is in reconstruction pre-processing, where an algorithm detects and discards frames that would lead to inaccurate feature matching, camera pose estimation degeneracies or mathematical instability in structure computation based on a residual error comparison between two different match motion models. The presented algorithms were designed for aerial video but have been proven to work across different scene types and camera motions, and for both real and synthetic scenes.

  2. Improving Rangeland Monitoring and Assessment: Integrating Remote Sensing, GIS, and Unmanned Aerial Vehicle Systems

    SciTech Connect (OSTI)

    Robert Paul Breckenridge

    2007-05-01

    Creeping environmental changes are impacting some of the largest remaining intact parcels of sagebrush steppe ecosystems in the western United States, creating major problems for land managers. The Idaho National Laboratory (INL), located in southeastern Idaho, is part of the sagebrush steppe ecosystem, one of the largest ecosystems on the continent. Scientists at the INL and the University of Idaho have integrated existing field and remotely sensed data with geographic information systems technology to analyze how recent fires on the INL have influenced the current distribution of terrestrial vegetation. Three vegetation mapping and classification systems were used to evaluate the changes in vegetation caused by fires between 1994 and 2003. Approximately 24% of the sagebrush steppe community on the INL was altered by fire, mostly over a 5-year period. There were notable differences between methods, especially for juniper woodland and grasslands. The Anderson system (Anderson et al. 1996) was superior for representing the landscape because it includes playa/bare ground/disturbed area and sagebrush steppe on lava as vegetation categories. This study found that assessing existing data sets is useful for quantifying fire impacts and should be helpful in future fire and land use planning. The evaluation identified that data from remote sensing technologies is not currently of sufficient quality to assess the percentage of cover. To fill this need, an approach was designed using both helicopter and fixed wing unmanned aerial vehicles (UAVs) and image processing software to evaluate six cover types on field plots located on the INL. The helicopter UAV provided the best system compared against field sampling, but is more dangerous and has spatial coverage limitations. It was reasonably accurate for dead shrubs and was very good in assessing percentage of bare ground, litter and grasses; accuracy for litter and shrubs is questionable. The fixed wing system proved to be feasible and can collect imagery for very large areas in a short period of time. It was accurate for bare ground and grasses. Both UAV systems have limitations, but these will be reduced as the technology advances. In both cases, the UAV systems collected data at a much faster rate than possible on the ground. The study concluded that improvements in automating the image processing efforts would greatly improve use of the technology. In the near future, UAV technology may revolutionize rangeland monitoring in the same way Global Positioning Systems have affected navigation while conducting field activities.

  3. An aerial radiological survey of the Tonopah Test Range including Clean Slate 1,2,3, Roller Coaster, decontamination area, Cactus Springs Ranch target areas. Central Nevada

    SciTech Connect (OSTI)

    Proctor, A.E.; Hendricks, T.J.

    1995-08-01

    An aerial radiological survey was conducted of major sections of the Tonopah Test Range (TTR) in central Nevada from August through October 1993. The survey consisted of aerial measurements of both natural and man-made gamma radiation emanating from the terrestrial surface. The initial purpose of the survey was to locate depleted uranium (detecting {sup 238}U) from projectiles which had impacted on the TTR. The examination of areas near Cactus Springs Ranch (located near the western boundary of the TTR) and an animal burial area near the Double Track site were secondary objectives. When more widespread than expected {sup 241}Am contamination was found around the Clean Slates sites, the survey was expanded to cover the area surrounding the Clean Slates and also the Double Track site. Results are reported as radiation isopleths superimposed on aerial photographs of the area.

  4. National Environmental Policy Act (NEPA) Categorically Excluded...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... B1.24, B3.1, B6.1 LM 28-14 Aerial Photography and Topographic Mapping of the Weldon ... 08262014 B3.1(c) LM 13-14 Aerial photography and mapping of the Gunnison, Colorado, ...

  5. An Aerial Radiological survey of the Alvin W. Vogtle Nuclear Plant and surrounding area, Waynesboro, Georgia: Date of survey: August--September 1988

    SciTech Connect (OSTI)

    Not Available

    1990-09-01

    An Aerial Radiological Survey was conducted during the period of August 24 to September 14, 1988 over an area of approximately 310 square kilometers (120 square miles) surrounding the Alvin W. Vogtle Nuclear Plant. The Vogtle Nuclear Plant is located near Augusta, Georgia, along the Savannah River and adjacent to the Savannah River Site (SRS). Several anomalous areas were identified in the portion of the survey extending into the SRS perimeter. The dominant isotopes found in these areas were cesium-137 and cobalt-60. All of these man-made anomalies identified by the aerial measurements were attributed to SRS processing. For the remainder of the survey area, the inferred radiation exposure rates generally varied from 6 to 10 microroentgens per hour ({mu}R/h), which was found to be due to naturally occurring uranium, thorium, and radioactive potassium gamma emitters. The reported exposure rate values included an estimated cosmic ray contribution of 3.6 {mu}R/h. Soils samples and pressurized ion chamber measurements were obtained at three locations within the survey boundaries to support the aerial data. The exposure rate values obtained from these groundbased measurements were in agreement with the corresponding inferred aerial values. 6 refs., 13 figs., 4 tabs.

  6. Nonlinear automatic landing control of unmanned aerial vehicles on moving platforms via a 3D laser radar

    SciTech Connect (OSTI)

    Hervas, Jaime Rubio; Tang, Hui; Reyhanoglu, Mahmut

    2014-12-10

    This paper presents a motion tracking and control system for automatically landing Unmanned Aerial Vehicles (UAVs) on an oscillating platform using Laser Radar (LADAR) observations. The system itself is assumed to be mounted on a ship deck. A full nonlinear mathematical model is first introduced for the UAV. The ship motion is characterized by a Fourier transform based method which includes a realistic characterization of the sea waves. LADAR observation models are introduced and an algorithm to process those observations for yielding the relative state between the vessel and the UAV is presented, from which the UAV's state relative to an inertial frame can be obtained and used for feedback purposes. A sliding mode control algorithm is derived for tracking a landing trajectory defined by a set of desired waypoints. An extended Kalman filter (EKF) is proposed to account for process and observation noises in the design of a state estimator. The effectiveness of the control algorithm is illustrated through a simulation example.

  7. CX-100076: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    NWTC Strategic Aerospace Unmanned Aerial System Wind Turbine Inspection Demonstration NREL Tracking No 14-021 CX(s) Applied: A9, A11, B3.2, B3.6National Renewable Energy Laboratory Date: 09/30/2014 Location(s): Colorado Office(s): Golden Field Office

  8. CX-007164: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Prescott-Pinnacle Peak & Pinnacle Peak-Rogers Aerial Marker Ball AdditionCX(s) Applied: B1.9Date: 01/07/2011Location(s): Maricopa County, ArizonaOffice(s): Western Area Power Administration-Desert Southwest Region

  9. Determining Hydrological Controls on Flood Frequency | U.S. DOE...

    Office of Science (SC) Website

    Aerial view of homes inundated with water following a 2011 flood in Minot, N.D. ... to better understand the relationship between annual water balance and flood frequency. ...

  10. Using Unmanned Aerial Vehicles to Assess Vegetative Cover and Identify Biotic Resources in Sagebrush Steppe Ecosystems: Preliminary Evaluation

    SciTech Connect (OSTI)

    Robert P. Breckenridge

    2006-04-01

    The Idaho National Laboratory (INL), in conjunction with the University of Idaho, is evaluating novel approaches for using unmanned aerial vehicles (UAVs) as a quicker and safer method for monitoring biotic resources. Evaluating vegetative cover is an important factor in understanding the sustainability of many ecosystems. In assessing vegetative cover, methods that improve accuracy and cost efficiency could revolutionize how biotic resources are monitored on western federal lands. Sagebrush steppe ecosystems provide important habitat for a variety of species, some of which are important indicator species (e.g., sage grouse). Improved methods are needed to support monitoring these habitats because there are not enough resource specialists or funds available for comprehensive ground evaluation of these ecosystems. In this project, two types of UAV platforms (fixed wing and helicopter) were used to collect still-frame imagery to assess cover in sagebrush steppe ecosystems. This paper discusses the process for collecting and analyzing imagery from the UAVs to (1) estimate total percent cover, (2) estimate percent cover for six different types of vegetation, and (3) locate sage grouse based on representative decoys. The field plots were located on the INL site west of Idaho Falls, Idaho, in areas with varying amounts and types of vegetative cover. A software program called SamplePoint developed by the U.S. Department of Agriculture, Agricultural Research Service was used to evaluate the imagery for percent cover for the six vegetation types (bare ground, litter, shrubs, dead shrubs, grasses, and forbs). Results were compared against standard field measurements to assess accuracy.

  11. CX-100083: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    NWTC-University of Colorado Unmanned Aerial Systems Wind Turbine Wakes and Radar Tracking Demonstration NREL Tracking No. 14-024 Award Number: DE-AC36-08GO28308 CX(s) Applied: A9, A11, B3.2, B3.6 National Renewable Energy Laboratory Date: 10/07/2014 Location(s): Colorado Office(s): Golden Field Office

  12. Structural Analysis of Southern Dixie Valley using LiDAR and...

    Open Energy Info (EERE)

    and characterize young faults, high resolution LiDAR and 1:12,000-scale low-sun-angle (LSA) aerial photography was acquired for the NAS Fallon study area. The LSA photos were...

  13. Microsoft Word - DOE Records Disposition Schedule Changes3.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... GRS 17,item 1 61407 17 2 Withdrawn Per NARA vertical and oblique aerial photography may be permanently valuable. (NARA e-mail 41107) 61407 17 6b Changed the series ...

  14. BPA-2010-01876-FOIA Correspondence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with the Agency about you request. You have requested the following: A copy of Aerial Photography: 11-02-1977 BPA-BIA Roll 4 Frames 6 through 9 09-12-1977 BPA-BIA Frame 8 plus...

  15. Unmanned Aerial Vehicle (UAV) Dynamic-Tracking Directional Wireless Antennas for Low Powered Applications that Require Reliable Extended Range Operations in Time Critical Scenarios

    SciTech Connect (OSTI)

    Scott G. Bauer; Matthew O. Anderson; James R. Hanneman

    2005-10-01

    The proven value of DOD Unmanned Aerial Vehicles (UAVs) will ultimately transition to National and Homeland Security missions that require real-time aerial surveillance, situation awareness, force protection, and sensor placement. Public services first responders who routinely risk personal safety to assess and report a situation for emergency actions will likely be the first to benefit from these new unmanned technologies. Packable or Portable small class UAVs will be particularly useful to the first responder. They require the least amount of training, no fixed infrastructure, and are capable of being launched and recovered from the point of emergency. All UAVs require wireless communication technologies for real- time applications. Typically on a small UAV, a low bandwidth telemetry link is required for command and control (C2), and systems health monitoring. If the UAV is equipped with a real-time Electro-Optical or Infrared (EO/Ir) video camera payload, a dedicated high bandwidth analog/digital link is usually required for reliable high-resolution imagery. In most cases, both the wireless telemetry and real-time video links will be integrated into the UAV with unity gain omni-directional antennas. With limited on-board power and payload capacity, a small UAV will be limited with the amount of radio-frequency (RF) energy it transmits to the users. Therefore, packable and portable UAVs will have limited useful operational ranges for first responders. This paper will discuss the limitations of small UAV wireless communications. The discussion will present an approach of utilizing a dynamic ground based real-time tracking high gain directional antenna to provide extend range stand-off operation, potential RF channel reuse, and assured telemetry and data communications from low-powered UAV deployed wireless assets.

  16. Aerial and ground-based inspections of mine sites in the Western U.S.-implications for on-site inspection overflights, under the CTBT

    SciTech Connect (OSTI)

    Heuze, F.E.

    1997-07-01

    The verification regime of the Comprehensive Test Ban Treaty (CTBT) provides for the possibility of On-Site Inspections (OSI`s) to resolve questions concerning suspicious events which may have been clandestine nuclear tests. Overflights by fixed-wing or rotary-wing aircraft, as part of an OSI, are permitted by the Treaty. These flights are intended to facilitate the narrowing of the inspection area, from an initial permissible 1000 km{sup 2}, and to help select the locations to deploy observers and ground-based sensors (seismic, radionuclides, . . .) Because of the substantial amount of seismicity generated by mining operations worldwide, it is expected that mine sites and mine districts would be prime candidates for OSI`S. To gain experience in this context, a number of aerial and ground-based mine site inspections have been performed in the Western U.S. by Lawrence Livermore National Laboratory since 1994. These inspections are part of a broad range of CTBT mining-related projects conducted by the U.S. Department of Energy and its National Laboratories. The various sites are described next, and inferences are made concerning CTBT OSI`S. All the mines are legitimate operations, with no implication whatsoever of any clandestine tests.

  17. Temperature determination using pyrometry

    DOE Patents [OSTI]

    Breiland, William G.; Gurary, Alexander I.; Boguslavskiy, Vadim

    2002-01-01

    A method for determining the temperature of a surface upon which a coating is grown using optical pyrometry by correcting Kirchhoff's law for errors in the emissivity or reflectance measurements associated with the growth of the coating and subsequent changes in the surface thermal emission and heat transfer characteristics. By a calibration process that can be carried out in situ in the chamber where the coating process occurs, an error calibration parameter can be determined that allows more precise determination of the temperature of the surface using optical pyrometry systems. The calibration process needs only to be carried out when the physical characteristics of the coating chamber change.

  18. NEPA Determination Complete

    Broader source: Energy.gov [DOE]

    DOE has determined that this proposed project is a major Federal action that may significantly affect the quality of the human environment. To comply with the National Environmental Policy Act ...

  19. Solids mass flow determination

    DOE Patents [OSTI]

    Macko, Joseph E.

    1981-01-01

    Method and apparatus for determining the mass flow rate of solids mixed with a transport fluid to form a flowing mixture. A temperature differential is established between the solids and fluid. The temperature of the transport fluid prior to mixing, the temperature of the solids prior to mixing, and the equilibrium temperature of the mixture are monitored and correlated in a heat balance with the heat capacities of the solids and fluid to determine the solids mass flow rate.

  20. Stereo-photography of streamers in air

    SciTech Connect (OSTI)

    Nijdam, S.; Moerman, J. S.; Briels, T. M. P.; Veldhuizen, E. M. van; Ebert, U.

    2008-03-10

    Standard photographs of streamer discharges show a two-dimensional projection. Here, we present stereophotographic images that resolve their three-dimensional structure. We describe the stereoscopic setup and evaluation, and we present results for positive streamer discharges in air at 0.2-1 bar in a point-plane geometry with a gap distance of 14 cm and a voltage pulse of 47 kV. In this case, an approximately Gaussian distribution of branching angles of 43 deg. {+-}12 deg. is found; these angles do not significantly depend on the distance from the needle or on the gas pressure.

  1. Categorical Exclusion Determinations: Environmental Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consolidated Business Service Center Categorical Exclusion Determinations: Environmental Management Consolidated Business Service Center Categorical Exclusion Determinations issued ...

  2. Categorical Exclusion Determinations: Minnesota | Department...

    Office of Environmental Management (EM)

    Minnesota Categorical Exclusion Determinations: Minnesota Location Categorical Exclusion Determinations issued for actions in Minnesota. DOCUMENTS AVAILABLE FOR DOWNLOAD December ...

  3. Waste Determination Equivalency - 12172

    SciTech Connect (OSTI)

    Freeman, Rebecca D.

    2012-07-01

    The Savannah River Site (SRS) is a Department of Energy (DOE) facility encompassing approximately 800 square kilometers near Aiken, South Carolina which began operations in the 1950's with the mission to produce nuclear materials. The SRS contains fifty-one tanks (2 stabilized, 49 yet to be closed) distributed between two liquid radioactive waste storage facilities at SRS containing carbon steel underground tanks with storage capacities ranging from 2,800,000 to 4,900,000 liters. Treatment of the liquid waste from these tanks is essential both to closing older tanks and to maintaining space needed to treat the waste that is eventually vitrified or disposed of onsite. Section 3116 of the Ronald W. Reagan National Defense Authorization Act of Fiscal Year 2005 (NDAA) provides the Secretary of Energy, in consultation with the Nuclear Regulatory Commission (NRC), a methodology to determine that certain waste resulting from prior reprocessing of spent nuclear fuel are not high-level radioactive waste if it can be demonstrated that the waste meets the criteria set forth in Section 3116(a) of the NDAA. The Secretary of Energy, in consultation with the NRC, signed a determination in January 2006, pursuant to Section 3116(a) of the NDAA, for salt waste disposal at the SRS Saltstone Disposal Facility. This determination is based, in part, on the Basis for Section 3116 Determination for Salt Waste Disposal at the Savannah River Site and supporting references, a document that describes the planned methods of liquid waste treatment and the resulting waste streams. The document provides descriptions of the proposed methods for processing salt waste, dividing them into 'Interim Salt Processing' and later processing through the Salt Waste Processing Facility (SWPF). Interim Salt Processing is separated into Deliquification, Dissolution, and Adjustment (DDA) and Actinide Removal Process/Caustic Side Solvent Extraction Unit (ARP/MCU). The Waste Determination was signed by the Secretary of Energy in January of 2006 based on proposed processing techniques with the expectation that it could be revised as new processing capabilities became viable. Once signed, however, it became evident that any changes would require lengthy review and another determination signed by the Secretary of Energy. With the maturation of additional salt removal technologies and the extension of the SWPF start-up date, it becomes necessary to define 'equivalency' to the processes laid out in the original determination. For the purposes of SRS, any waste not processed through Interim Salt Processing must be processed through SWPF or an equivalent process, and therefore a clear statement of the requirements for a process to be equivalent to SWPF becomes necessary. (authors)

  4. Interim Action Determination

    Energy Savers [EERE]

    Interim Action Determination Processing of Plutonium Materials from the DOE Standard 3013 Surveillance Program in H-Canyon at the Savannah River Site The Department of Energy (DOE) is preparing the Surplus Plutonium Disposition Supplemental Environmental Impact Statement (SPD SEIS, DOE/EIS-0283-S2). DOE is evaluating alternatives for disposition of non-pit plutonium that is surplus to the national security needs of the United States. Although the Deputy Secretary of Energy approved Critical

  5. NEPA Determination Form

    National Nuclear Security Administration (NNSA)

    LA NEPA COMPLIANCE DETERMINATION FORM PRID - 09P-0059 V2 Page 1 of 8 Project/Activity Title: TA-3 Substation Replacement Project PRID: 09P-0059 V2 Date: February 16, 2016 Purpose: The proposed demolition and replacement of the Los Alamos National Laboratory's (LANL) Technical Area (TA)-3 electrical power substation is needed to provide reliable and efficient electrical distribution systems with sufficient electrical capacity to support the national security missions. The electrical distribution

  6. Award Fee Determination Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 CH2M Hill Plateau Remediation Company Contract Number: DE-AC06-08RL14788 Final Fee Determination for Base funded Performance Measures Basis of Evaluation: Completion of Performance Measures contained in Section J, Attachment J.4, Performance Evaluation and Measurement Plan, according to the identified completion criteria. Evaluation Results: FY 2012 Base Period Fee Available Fee allocated to FY 2012* Performance Measures $10,399,033.60 Incremental Fee $4,490,000.00 Provisional Fee

  7. Award Fee Determination Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 CH2M Hill Plateau Remediation Company Contract Number: DE-AC06-08RL14788 Final Fee Determination for Base funded and American Recovery and Reinvestment Act (Recovery) funded Performance Measures Basis of Evaluation: Completion of Performance Measures contained in Section J, AttachmentJ.4, Performance Evaluation and Measurement Plan, according to the identified completion criteria. Evaluation Results: Fiscal Year 2011 (Oct 1, 2010 - Sept 30, 2011) Base Funded Fee Recovery Funded Fee Available

  8. Categorical Exclusion Determinations: California | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... February 25, 2016 CX-100493 Categorical Exclusion Determination Integrated Glass Coating ... February 25, 2016 CX-100514 Categorical Exclusion Determination Crop Protection Utilizing ...

  9. Categorical Exclusion Determinations: Connecticut | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 11, 2014 CX-100033: Categorical Exclusion Determination "Smart" Matrix Development ... May 22, 2014 CX-012145: Categorical Exclusion Determination Connecticut Clean Cities ...

  10. Categorical Exclusion Determinations: Louisiana | Department...

    Office of Environmental Management (EM)

    March 4, 2016 CX-100533 Categorical Exclusion Determination Pump Station Improvements ... February 18, 2015 CX-100185 Categorical Exclusion Determination Pump Station Improvements ...

  11. Categorical Exclusion Determinations: Mississippi | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 30, 2015 CX-013741: Categorical Exclusion Determination Statistical Analysis of ... March 30, 2015 CX-013758: Categorical Exclusion Determination Statistical Analysis of ...

  12. Categorical Exclusion Determinations: Tennessee | Department...

    Energy Savers [EERE]

    February 26, 2016 CX-100506 Categorical Exclusion Determination Biofuel Micro-Refineries ... Low-Viscosity Oils for Automotive Engine and Rear Axle Lubrication for 4% Improved ...

  13. CX-012200: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Determination of Excess Real Property CX(s) Applied: B1.36 Date: 05/01/2014 Location(s): Colorado Offices(s): Legacy Management

  14. CX-010689: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Generic CX Determination for Financial Assistance Awards CX(s) Applied: Unknown Date: 07/17/2013 Location(s): Illinois Offices(s): Chicago Office

  15. Categorical Exclusion Determinations: Environmental Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... September 13, 2011 CX-006990: Categorical Exclusion Determination Synthesis and Characterization of Coatings by Chemical Solution Deposition Methods CX(s) Applied: B3.6 Date: 09...

  16. Award Fee Determination Scorecard Contractor: Mission Support Alliance, LLC (MSA)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aviation Manager Joseph Ginanni Joseph Ginanni July 2009 U.S. General Services Administration (GSA) Federal Aviation Professional Award Aviation Manager Joseph Ginanni has received the U.S. General Services Administration (GSA) Federal Aviation Professional Award. Ginanni oversees the Aviation Services Department of the NNSA/NSO Remote Sensing Laboratory at Nellis and Andrews Air Force Bases. The program provides aerial support to the NNSA Office of Emergency Response, which protects people from

  17. Method of determining glass durability

    DOE Patents [OSTI]

    Jantzen, C.M.; Pickett, J.B.; Brown, K.G.; Edwards, T.B.

    1998-12-08

    A process is described for determining one or more leachate concentrations of one or more components of a glass composition in an aqueous solution of the glass composition by identifying the components of the glass composition, including associated oxides, determining a preliminary glass dissolution estimator, {Delta}G{sub p}, based upon the free energies of hydration for the component reactant species, determining an accelerated glass dissolution function, {Delta}G{sub a}, based upon the free energy associated with weak acid dissociation, {Delta}G{sub a}{sup WA}, and accelerated matrix dissolution at high pH, {Delta}G{sub a}{sup SB} associated with solution strong base formation, and determining a final hydration free energy, {Delta}G{sub f}. This final hydration free energy is then used to determine leachate concentrations for elements of interest using a regression analysis and the formula log{sub 10}(N C{sub i}(g/L))=a{sub i} + b{sub i}{Delta}G{sub f}. The present invention also includes a method to determine whether a particular glass to be produced will be homogeneous or phase separated. The present invention is also directed to methods of monitoring and controlling processes for making glass using these determinations to modify the feedstock materials until a desired glass durability and homogeneity is obtained. 4 figs.

  18. Method of determining glass durability

    DOE Patents [OSTI]

    Jantzen, Carol Maryanne; Pickett, John Butler; Brown, Kevin George; Edwards, Thomas Barry

    1998-01-01

    A process for determining one or more leachate concentrations of one or more components of a glass composition in an aqueous solution of the glass composition by identifying the components of the glass composition, including associated oxides, determining a preliminary glass dissolution estimator, .DELTA.G.sub.p, based upon the free energies of hydration for the component reactant species, determining an accelerated glass dissolution function, .DELTA.G.sub.a, based upon the free energy associated with weak acid dissociation, .DELTA.G.sub.a.sup.WA, and accelerated matrix dissolution at high pH, .DELTA.G.sub.a.sup.SB associated with solution strong base formation, and determining a final hydration free energy, .DELTA.G.sub.f. This final hydration free energy is then used to determine leachate concentrations for elements of interest using a regression analysis and the formula log.sub.10 (N C.sub.i (g/L))=a.sub.i +b.sub.i .DELTA.G.sub.f. The present invention also includes a method to determine whether a particular glass to be produced will be homogeneous or phase separated. The present invention is also directed to methods of monitoring and controlling processes for making glass using these determinations to modify the feedstock materials until a desired glass durability and homogeneity is obtained.

  19. Categorical Exclusion Determinations: Pennsylvania | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 3, 2015 CX-100321 Categorical Exclusion Determination VOLTTRON Compatible Whole Building root-Fault Detection and Diagnosis Award Number: DE-EE0007135 CX(s) Applied: A9, ...

  20. CX-100604 Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Final Determination of Coverage for Miscellaneous Refrigeration Products RIN 1904-AC66 CX(s) Applied: A6 EERE-Buildings Technology Program Date: 05/04/2016 Location(s): Nationwide Office(s): Golden Field Office

  1. CX-000768: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Determining the Variability of Continuous Mercury Monitors at Low Mercury LevelsCX(s) Applied: B3.6Date: 02/07/2010Location(s): Grand Forks, North DakotaOffice(s): Fossil Energy, National Energy Technology Laboratory

  2. CX-008905: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Optimizing Accuracy of Determinations of Carbon Dioxide Storage Capacity and Permanence CX(s) Applied: A1, A9, B3.6 Date: 08/29/2012 Location(s): Wyoming Offices(s): National Energy Technology Laboratory

  3. CX-010776: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Test Reactor (ATR) Primary Coolant Leak Rate Determination System Equipment Replacement CX(s) Applied: B2.2 Date: 07/24/2013 Location(s): Idaho Offices(s): Nuclear Energy

  4. CX-010493: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Determining Distribution Coefficients by Surface-Enhanced Raman Spectroscopy (SERS) CX(s) Applied: B3.6 Date: 05/14/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  5. Categorical Exclusion Determinations: Wisconsin | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... March 4, 2015 CX-100191 Categorical Exclusion Determination Cost-Optimized Modular Helical Rotors Turbine-Generator System for Small Hydro Power Plants Award Number: DE-EE0006927 ...

  6. Categorical Exclusion Determinations: Nationwide | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 25, 2016 CX-100584 Categorical Exclusion Determination Data Collection and Comparison with Forecasted Sales of Five Lamp Types RIN NA CX(s) Applied: A6 EERE-Buildings ...

  7. Categorical Exclusion Determinations: Massachusetts | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    December 3, 2015 CX-100413 Categorical Exclusion Determination The French Modular Impoundment Award Number: DE-FOA-0007244 CX(s) Applied: A9, B3.6 Wind and Water Power Technologies ...

  8. CX-012121: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Notice of Preliminary Determination of Energy Savings for ANSI/ASHRAE/IES Standard 90.1-2013 CX(s) Applied: A6 Date: 04/25/2014 Location(s): CX: none Offices(s): Golden Field Office

  9. CX-004264: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Phase II, Determination of Uranium in GroundwaterCX(s) Applied: B3.8Date: 09/27/2010Location(s): Richland, WashingtonOffice(s): Environmental Management, Office of River Protection-Richland Office

  10. Gender determination of avian embryo

    DOE Patents [OSTI]

    Daum, Keith A.; Atkinson, David A.

    2002-01-01

    Disclosed is a method for gender determination of avian embryos. During the embryo incubation process, the outer hard shells of eggs are drilled and samples of allantoic fluid are removed. The allantoic fluids are directly introduced into an ion mobility spectrometer (IMS) for analysis. The resulting spectra contain the relevant marker peaks in the positive or negative mode which correlate with unique mobilities which are sex-specific. This way, the gender of the embryo can be determined.

  11. Remote sensing and spectral analysis of plumes from ocean dumping in the New York Bight Apex

    SciTech Connect (OSTI)

    Johnson, R.W.

    1980-05-01

    The application of the remote sensing techniques of aerial photography and multispectral scanning in the qualitative and quantitative analysis of plumes from ocean dumping of waste materials is investigated in the New York Bight Apex. Plumes resulting from the dumping of acid waste and sewage sludge were observed by Ocean Color Scanner at an altitude of 19.7 km and by Modular Multispectral Scanner and mapping camera at an altitude of 3.0 km. Results of the qualitative analysis of multispectral and photographic data for the mapping, location, and identification of pollution features without concurrent sea truth measurements are presented which demonstrate the usefulness of in-scene calibration. Quantitative distributions of the suspended solids in sewage sludge released in spot and line dumps are also determined by a multiple regression analysis of multispectral and sea truth data.

  12. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... be introduced, how can pictures be taken, what can be seen) Determine if IR photography can be used to examine components submerged in the salt Determine if the ...

  13. Liquid Fluoride Salt Experimentation Using a Small Natural Circulation...

    Office of Scientific and Technical Information (OSTI)

    be introduced, how can pictures be taken, what can be seen) Determine if IR photography can be used to examine components submerged in the salt Determine if the ...

  14. MEANS FOR DETERMINING CENTRIFUGE ALIGNMENT

    DOE Patents [OSTI]

    Smith, W.Q.

    1958-08-26

    An apparatus is presented for remotely determining the alignment of a centrifuge. The centrifage shaft is provided with a shoulder, upon which two followers ride, one for detecting radial movements, and one upon the shoulder face for determining the axial motion. The followers are attached to separate liquid filled bellows, and a tube connects each bellows to its respective indicating gage at a remote location. Vibrations produced by misalignment of the centrifuge shaft are transmitted to the bellows, and tbence through the tubing to the indicator gage. This apparatus is particularly useful for operation in a hot cell where the materials handled are dangerous to the operating personnel.

  15. Operation Greenhouse. Scientific Director's report of atomic-weapon tests at Eniwetok, 1951. Annex 4. 1. Cloud studies. Part 1. Cloud physics. Part 2. Development of the atomic cloud. Part 3. Cloud-tracking photography

    SciTech Connect (OSTI)

    Anderson, C.E.; Gustafson, P.E.; Kellogg, W.W.; McKown, R.E.; McPherson, D.E.

    1985-09-01

    The cloud-physics project was primarily intended to fulfill a requirements for detailed information on the meteorological microstructure of atomic clouds. By means of a tracking and photographic network extending halfway around Eniwetok Atoll, the behavior of the first three clouds of Operation Greenhouse were observed and recorded. The rise of the fourth cloud was observed visually from only one site. The analysis of these observations, combined with information about the local weather conditions, gives a fairly complete picture of the development of each of the clouds. Particular emphasis was placed on the earlier phases of development, and the heights and sizes of the cloud parts have been determined as functions of time. A summary of important features of some previous atomic clouds are included for comparison.

  16. Categorical Exclusion Determinations: Health, Safety, and Security...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Health, Safety, and Security Categorical Exclusion Determinations: Health, Safety, and Security Categorical Exclusion Determinations issued by Health, Safety, and Security. ...

  17. Categorical Exclusion Determinations: Civilian Radioactive Waste...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Civilian Radioactive Waste Management Categorical Exclusion Determinations: Civilian Radioactive Waste Management Categorical Exclusion Determinations issued by Civilian ...

  18. CX-100267 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-100267 Categorical Exclusion Determination Next Generation Logistics Systems for Delivering Optimal Biomass Feedstocks to Biorefining Industries in...

  19. Categorical Exclusion Determinations: Strategic Petroleum Reserve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategic Petroleum Reserve Field Office Categorical Exclusion Determinations: Strategic Petroleum Reserve Field Office Categorical Exclusion Determinations issued by Strategic ...

  20. CX-100144 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-100144 Categorical Exclusion Determination Solar and Distributed Generation as Key Elements in Meeting Vermont's Comprehensive Energy Plan...

  1. Categorical Exclusion Determinations: Office of Electricity Delivery...

    Office of Environmental Management (EM)

    Electricity Delivery and Energy Reliability Categorical Exclusion Determinations: Office of Electricity Delivery and Energy Reliability Categorical Exclusion Determinations issued ...

  2. CX-100363 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-100363 Categorical Exclusion Determination Marine Algae Industrialization Consortium (MAGIC): Combining biofuel and high-value bioproducts to...

  3. Categorical Exclusion Determinations: Natural Gas Regulation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Natural Gas Regulation Categorical Exclusion Determinations: Natural Gas Regulation Categorical Exclusion Determinations issued by Natural Gas Regulation. DOCUMENTS AVAILABLE FOR ...

  4. Adjudicative Guidelines for Determining Eligibility for Access...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adjudicative Guidelines for Determining Eligibility for Access to Classified Information Adjudicative Guidelines for Determining Eligibility for Access to Classified Information ...

  5. Categorical Exclusion Determinations: Carlsbad Field Office ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Carlsbad Field Office Categorical Exclusion Determinations: Carlsbad Field Office Categorical Exclusion Determinations issued by Carlsbad Field Office. DOCUMENTS AVAILABLE FOR ...

  6. Categorical Exclusion Determinations: Energy Technology Engineering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Technology Engineering Center Categorical Exclusion Determinations: Energy Technology Engineering Center Categorical Exclusion Determinations issued by Energy Technology ...

  7. Plasma digital density determining device

    DOE Patents [OSTI]

    Sprott, Julien C.; Lovell, Thomas W.; Holly, Donald J.

    1976-01-01

    The density of a decaying plasma in an electrically conducting enclosure is determined by applying an excitation to the cavity formed by the enclosure and counting digitally the number of resonant frequencies traversed by the combination of the cavity and the decaying plasma.

  8. CX-002602: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: A9, A11Date: 12/11/2009Location(s): Minneapolis, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  9. CX-002600: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Minneapolis, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  10. CX-002599: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Berkeley, CaliforniaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  11. CX-002598: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Morris, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  12. CX-002601: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Fridley, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  13. CX-011193: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Categorical Exclusion Determination for Indoor, Small- and Pilot-Scale Research and Development CX(s) Applied: A9, B1.7, B3.6, B3.10, B3.12, B3.15, B5.1, B5.15 Date: 08/05/2013 Location(s): California Offices(s): Berkeley Site Office

  14. CX-008738: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determination of Microstructure and Chemical State Changes in Ion-Irradiated Fuels and Structural Components with a High Kinetic Energy Electron Detector – Illinois Institute of Technology CX(s) Applied: B3.6 Date: 05/22/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  15. CX-013440: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Record of Categorical Exclusion Determination to Replace Piping Header at Bryan Mound RWIS and RWIP (BM-MM-1027) CX(s) Applied: B1.3Date: 02/18/2015 Location(s): TexasOffices(s): Strategic Petroleum Reserve Field Office

  16. CX-000373: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Measurements of 222 Radon, 220 Radon, and Carbon Dioxide Emissions in Natural Carbon Dioxide Fields in Wyoming: Monitoring, Verification, and Analysis Techniques for Determining Gas Transport and Caprock IntegrityCX(s) Applied: A1, A9, B3.6, B3.8Date: 11/20/2009Location(s): Laramie, WyomingOffice(s): Fossil Energy, National Energy Technology Laboratory

  17. CX-100312 Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Withdrawal of Proposed Determination Regarding Energy Conservation Program: Natural Draft Commercial Boilers RIN: 1904-AD01 CX(s) Applied: A5 EERE- Buildings Technology Program Date: 07/20/2015 Location(s): Nationwide Office(s): Golden Field Office

  18. CX-012693: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Experimental Determination and Mechanistic Modeling of Used Fuel Drying by Vacuum and Gas Circulation for Dry Cask Storage University of South Carolina CX(s) Applied: B3.6Date: 41869 Location(s): South CarolinaOffices(s): Nuclear Energy

  19. CX-100019: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Determination of Rare Earths in Geothermal Brines and Evaluation of Potential Extraction Techniques CX(s) Applied: A9, B3.1, B3.6 Date: 08/18/2014 Location(s): California Offices(s): Golden Field Office Technology Office: Geothermal Technologies Award Number: DE-EE0006750

  20. CX-100558 Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Final Determination of Coverage for Portable Air Conditioners (1904-AD02) RIN 1904-AD02 CX(s) Applied: A6 EERE-Buildings Technology Program Date: 03/03/2016 Location(s): Nationwide Office(s): Golden Field Office

  1. BPA-2010-01867-FOIA Correspondence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Agency about you request. You have requested the following: A copy of Aerial Photography: BIA 5 04-10-1978 1-6 EXPOSURES BIA 4B 07-28-1978 I-8 EXPOSURES BIA 4C 10-25-1978...

  2. Expanding Geothermal Resource Utilization in Nevada through Directed Research and Public Outreach

    Broader source: Energy.gov [DOE]

    This project entails finding and assessing geothermal systems to: Increase geothermal development through research and outreach; Reduce risk in drill target selection, thus reducing project development costs; and Recent research includes development of shallow temperature surveys, seismic methods, aerial photography, field structural geology.

  3. BPA-2010-01867-FOIA Response

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1-5 EXPOSURES are provided on the enclosed DVDs. Response BPA-2010-01876-F: Aerial Photography: 11-02-1977 BPA-BIA Roll 4 Frames 6 through 9; 09-12-1977 BPA-BIA Frame 8 plus...

  4. Experimental determination of contaminant metal mobility as a function of temperature, time and solution chemistry. 1997 annual progress report

    SciTech Connect (OSTI)

    Carroll, S.; Bruton, C.; O'Day, P.; Sahai, N.

    1997-01-01

    'Strontium is significantly more mobile than other hazardous radioactive metals. Its partitioning between aqueous and solid phases is controlled by reactions that occur at the interface between natural waters and minerals. At a groundwater site in Hanford (200-BP-5), the aerial extent of the {sup 90}Sr plume is 100 times larger than the aerial extent of the {sup 137}Cs and the {sup 239}Pu plumes. Similarly, contaminated, perched watertables at INEL have much higher aqueous concentrations of {sup 90}Sr than {sup 137}Cs, presumably because Cs is preferentially sorbed to solids (Duncan 1995). Under high physical flow conditions, such as those in the highly fractured rock at Hanford and INEL, {sup 90}Sr present in plumes may spread off-site and cause contamination of aquifers or other water sources. Geochemical factors that may contribute to the overall mobility of Sr in natural waters are the solubilities of phases such as strontianite (SrCO{sub 3}) and formation of strong complexes with sulfate and nitrate. Although {sup 90}Sr is mobilized in natural waters in these examples, significant concentrations may also be present in solid phases. Sorption experiments using a wide variety of substrates at room temperature have shown that Sr is removed from solution under certain conditions. Additionally, strontianite (SrCO{sub 3}) may precipitate at low Sr concentrations in the pH range of waters in contact with basaltic rocks, which varies between pH 8 and 10. Waters contain variable amounts of carbonate owing to atmospheric interactions; the partial pressure of CO{sub 2} is about 10 x 3.5 atm in air and commonly as high as 10 x 2.5 atm in soils. The objective of this work is to determine the fundamental data needed to predict the behavior of strontium at temperature and time scales appropriate to thermal remediation. The authors approach combines macroscopic sorption/precipitation and desorption/dissolution kinetic experiments, which track changes in solution composition, with direct molecular characterization of strontium in the solid phase using X-ray absorption spectroscopy. These experiments will be used to identify mechanistic geochemical reactions and their thermochemical properties that will be incorporated into geochemical computer codes. This report consists of two sections: (1) a description of the preliminary results of strontium sorption to kaolinite and goethite from pH 4 to 10 at 25, 50, and 80 C and atmospheric CO{sub 2}(g); and (2) a review of the available thermodyanimc data in the is Fe-Sr-Na-NO{sub 3}-CO{sub 2}-H{sub 2}O system.'

  5. Range determination for scannerless imaging

    DOE Patents [OSTI]

    Muguira, Maritza Rosa; Sackos, John Theodore; Bradley, Bart Davis; Nellums, Robert

    2000-01-01

    A new method of operating a scannerless range imaging system (e.g., a scannerless laser radar) has been developed. This method is designed to compensate for nonlinear effects which appear in many real-world components. The system operates by determining the phase shift of the laser modulation, which is a physical quantity related physically to the path length between the laser source and the detector, for each pixel of an image.

  6. Method for determining gene knockouts

    DOE Patents [OSTI]

    Maranas, Costa D; Burgard, Anthony R; Pharkya, Priti

    2013-06-04

    A method for determining candidates for gene deletions and additions using a model of a metabolic network associated with an organism, the model includes a plurality of metabolic reactions defining metabolite relationships, the method includes selecting a bioengineering objective for the organism, selecting at least one cellular objective, forming an optimization problem that couples the at least one cellular objective with the bioengineering objective, and solving the optimization problem to yield at least one candidate.

  7. Method for determining gene knockouts

    DOE Patents [OSTI]

    Maranas, Costas D.; Burgard, Anthony R.; Pharkya, Priti

    2011-09-27

    A method for determining candidates for gene deletions and additions using a model of a metabolic network associated with an organism, the model includes a plurality of metabolic reactions defining metabolite relationships, the method includes selecting a bioengineering objective for the organism, selecting at least one cellular objective, forming an optimization problem that couples the at least one cellular objective with the bioengineering objective, and solving the optimization problem to yield at least one candidate.

  8. Inventory of landslides in southern Illinois near the New Madrid Seismic Zone and the possible failure mechanism at three sites

    SciTech Connect (OSTI)

    Su, Wen June . Engineering Geology Section)

    1992-01-01

    A total of 221 landslides was inventoried along a 200-kilometer reach of the Ohio and the Mississippi Rivers from Olmsted to Chester, IL using Side-Looking Airborne Radar imagery, vertical, stereoscopic, black and white aerial photography at various scales, and low altitude, oblique color and color infrared photography. Features observed on aerial photographs were used to classify landslides into three types (rock/debris fall, block slide, and rotational/translational slide) at three levels of confidence: certain, probable, or possible. Some landslides combined two or more types at a single site. Only a few of the landslides showed evidence of repeated activity; most are ancient landforms. Most of the landslides were developed in the loess, alluvium, colluvium, and weak clay layers of the Chesterian Series or in the Porter's Creek Clay and McNairy Formation. Failure of three representative landslides was modeled under static (aseismic) and dynamic (seismic) situations using three different sliding mechanisms. Both the pseudo-static method and a simplified method of the Newmark displacement analysis were used to determine the stability of the slope under earthquake conditions. The three representative landslides selected for detailed slope stability analysis were the Ford Hill, Jones Ridge, and Olmsted landslides. The Ford Hill and Jones Ridge landslides have similar slope geometries. Their modes of failure were recognized as a translational block slide on a weak clay layer. The Olmsted landslide is a complex of several rotational slides of different ages and a mega block slide on weak clay layers. The stability analyses of these three landslides suggest that they would not have occurred under aseismic conditions. However, under earthquake loadings similar to those generated by the 1811-12 earthquakes, most of the slopes could have experienced large displacements leading to landslide initiation.

  9. Liquid chromatographic determination of water

    DOE Patents [OSTI]

    Fortier, Nancy E.; Fritz, James S.

    1990-11-13

    A sensitive method for the determination of water in the presence of common interferences is presented. The detection system is based on the effect of water on the equilibrium which results from the reaction aryl aldehydes, such as cinnamaldehyde and methanol in the eluent to form cinnamaldehyde dimethylacetal, plus water. This equilibrium is shifted in a catalytic atmosphere of a hydrogen ion form past column reactor. The extent of the shift and the resulting change in absorbance are proportional to the amount of water present.

  10. Liquid chromatographic determination of water

    DOE Patents [OSTI]

    Fortier, N.E.; Fritz, J.S.

    1990-11-13

    A sensitive method for the determination of water in the presence of common interferences is presented. The detection system is based on the effect of water on the equilibrium which results from the reaction aryl aldehydes, such as cinnamaldehyde and methanol in the eluent to form cinnamaldehyde dimethylacetal, plus water. This equilibrium is shifted in a catalytic atmosphere of a hydrogen ion form past column reactor. The extent of the shift and the resulting change in absorbance are proportional to the amount of water present. 1 fig.

  11. RECORD OF CATEGORICAL EXCLUSION DETERMINATION

    Energy Savers [EERE]

    geological boring near 9 structure locations along the existing ED2-ED5 230-kV transmission line located in Pinal County, Arizona RECORD OF CATEGORICAL EXCLUSION DETERMINATION A, Proposed Action: Western proposes to do geologic borings within our right-of-way near structures 21/5,22/5,23/6,25/4,26/5,27/6,28/5,29/5 & 30/4 along the existing ED2-ED5 230-kV transmission line. This project involves accessing each bore hole location with a auger/drill rig and light crew trucks, setting up the

  12. Crystal face temperature determination means

    DOE Patents [OSTI]

    Nason, D.O.; Burger, A.

    1994-11-22

    An optically transparent furnace having a detection apparatus with a pedestal enclosed in an evacuated ampule for growing a crystal thereon is disclosed. Temperature differential is provided by a source heater, a base heater and a cold finger such that material migrates from a polycrystalline source material to grow the crystal. A quartz halogen lamp projects a collimated beam onto the crystal and a reflected beam is analyzed by a double monochromator and photomultiplier detection spectrometer and the detected peak position in the reflected energy spectrum of the reflected beam is interpreted to determine surface temperature of the crystal. 3 figs.

  13. Determination of a mutational spectrum

    DOE Patents [OSTI]

    Thilly, William G.; Keohavong, Phouthone

    1991-01-01

    A method of resolving (physically separating) mutant DNA from nonmutant DNA and a method of defining or establishing a mutational spectrum or profile of alterations present in nucleic acid sequences from a sample to be analyzed, such as a tissue or body fluid. The present method is based on the fact that it is possible, through the use of DGGE, to separate nucleic acid sequences which differ by only a single base change and on the ability to detect the separate mutant molecules. The present invention, in another aspect, relates to a method for determining a mutational spectrum in a DNA sequence of interest present in a population of cells. The method of the present invention is useful as a diagnostic or analytical tool in forensic science in assessing environmental and/or occupational exposures to potentially genetically toxic materials (also referred to as potential mutagens); in biotechnology, particularly in the study of the relationship between the amino acid sequence of enzymes and other biologically-active proteins or protein-containing substances and their respective functions; and in determining the effects of drugs, cosmetics and other chemicals for which toxicity data must be obtained.

  14. NREL: Climate Neutral Research Campuses - Determine Baseline...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Determine Baseline Energy Consumption To create a climate action plan for your research campus, begin by determining current energy consumption and the resulting greenhouse gas ...

  15. Categorical Exclusion Determinations: Pantex Site Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 18, 2015 CX-013480: Categorical Exclusion Determination Lightning Mapping Array ... December 27, 2013 CX-011714: Categorical Exclusion Determination Lightning Mapping Array ...

  16. Categorical Exclusion Determinations: West Valley Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 8, 2011 CX-009529: Categorical Exclusion Determination WVDP-2011-01 Erdman Brook ... September 8, 2011 CX-006811: Categorical Exclusion Determination Erdman Brook Erosion ...

  17. Categorical Exclusion Determinations: Office of Energy Efficiency...

    Office of Environmental Management (EM)

    Energy Efficiency and Renewable Energy Categorical Exclusion Determinations: Office of Energy Efficiency and Renewable Energy Categorical Exclusion Determinations issued by Energy ...

  18. Determinations and Coverage Rulemakings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determinations and Coverage Rulemakings Determinations and Coverage Rulemakings The Energy Policy and Conservation Act (EPCA) (42 U.S.C. 6292(a)) contains a list of 19 consumer ...

  19. CX-011104: Categorical Exclusion Determination | Department of...

    Energy Savers [EERE]

    Coupled Thermo-Mechanical and Photo-Chemical Degradation Mechanisms that Determine ... coupled thermo-mechanical and photo-chemical degradation mechanisms that determine ...

  20. CX-007095: Categorical Exclusion Determination | Department of...

    Office of Environmental Management (EM)

    Determination CX-007095: Categorical Exclusion Determination Paving the Way with Propane: The AutoGas Corridor Development Program CX(s) Applied: B5.1 Date: 10132011...

  1. CX-007096: Categorical Exclusion Determination | Department of...

    Office of Environmental Management (EM)

    Determination CX-007096: Categorical Exclusion Determination Paving the Way with Propane: The AutoGas Corridor Development Program CX(s) Applied: B5.1 Date: 10132011...

  2. CX-011970: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-011970: Categorical Exclusion Determination Tuscarora Phase II Geothermal Observation Wells CX(s) Applied: B3.7 Date: 02222013 Location(s):...

  3. CX-001087: Categorical Exclusion Determination | Department of...

    Office of Environmental Management (EM)

    87: Categorical Exclusion Determination CX-001087: Categorical Exclusion Determination State of Nevada Energy Efficiency and Conservation Block Grant - American Recovery and...

  4. CX-006491: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination CX-006491: Categorical Exclusion Determination Photovoltaic Manufacturing Consortium CX(s) Applied: B3.6 Date: 09012011 Location(s): Florida...

  5. CX-007867: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-007867: Categorical Exclusion Determination Northeast Photovoltaic Regional Training Provider CX(s) Applied: A9, A11, B5.16 Date: 01272012...

  6. Categorical Exclusion Determinations: Florida | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 16, 2015 CX-100377 Categorical Exclusion Determination US-INDIA CONSORTIUM FOR ... September 8, 2015 CX-100367 Categorical Exclusion Determination US-India Consortium for ...

  7. CX-003164: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination CX-003164: Categorical Exclusion Determination Optimization of Biomass Production Across a Landscape CX(s) Applied: A9 Date: 07262010...

  8. CX-004247: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-004247: Categorical Exclusion Determination Carolina Blue Skies Initiative CX(s) Applied: A1, B5.1 Date: 10142010 Location(s): Indian Trail,...

  9. CX-008810: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-008810: Categorical Exclusion Determination One Nevada Optimization of Microwave Telecommunication System CX(s) Applied: B1.19, B4.6 Date: 05292012...

  10. Categorical Exclusion Determinations: Kentucky | Department of...

    Office of Environmental Management (EM)

    ... May 14, 2013 CX-010281: Categorical Exclusion Determination Low Temperature Nitrous Oxide ... Determination Cost-Effective Treatment of Flowback and Produced Water via an ...

  11. Applications of low-cost radio-controlled airplanes to environmental restoration at Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Nyquist, J.E.

    1996-10-01

    The US DOE is endeavoring to clean up contamination created by the disposal of chemical and nuclear waste on the Oak Ridge Reservation (ORR), Tennessee, with an emphasis on minimizing off-site migration of contaminated surface and ground water. The task is complicated by inadequate disposal records and by the complexity of the local geology. Remote sensing data, including aerial photography and geophysics, have played an important role in the ORR site characterization. Are there advantages to collecting remote sensing data using Unmanned Aerial Vehicles (UAV`s)? In this paper, I will discuss the applications of UAV`s being explored at Oak Ridge National Laboratory (ORNL) under the sponsorship of the Department of Energy`s Office of Science and technology. These applications are : aerial photography, magnetic mapping, and Very Low Frequency (VLF) electromagnetic mapping.

  12. Crystal face temperature determination means

    DOE Patents [OSTI]

    Nason, Donald O.; Burger, Arnold

    1994-01-01

    An optically transparent furnace (10) having a detection apparatus (29) with a pedestal (12) enclosed in an evacuated ampule (16) for growing a crystal (14) thereon. Temperature differential is provided by a source heater (20), a base heater (24) and a cold finger (26) such that material migrates from a polycrystalline source material (18) to grow the crystal (14). A quartz halogen lamp (32) projects a collimated beam (30) onto the crystal (14) and a reflected beam (34) is analyzed by a double monochromator and photomultiplier detection spectrometer (40) and the detected peak position (48) in the reflected energy spectrum (44) of the reflected beam (34) is interpreted to determine surface temperature of the crystal (14).

  13. Ballistic projectile trajectory determining system

    DOE Patents [OSTI]

    Karr, T.J.

    1997-05-20

    A computer controlled system determines the three-dimensional trajectory of a ballistic projectile. To initialize the system, predictions of state parameters for a ballistic projectile are received at an estimator. The estimator uses the predictions of the state parameters to estimate first trajectory characteristics of the ballistic projectile. A single stationary monocular sensor then observes the actual first trajectory characteristics of the ballistic projectile. A comparator generates an error value related to the predicted state parameters by comparing the estimated first trajectory characteristics of the ballistic projectile with the observed first trajectory characteristics of the ballistic projectile. If the error value is equal to or greater than a selected limit, the predictions of the state parameters are adjusted. New estimates for the trajectory characteristics of the ballistic projectile are made and are then compared with actual observed trajectory characteristics. This process is repeated until the error value is less than the selected limit. Once the error value is less than the selected limit, a calculator calculates trajectory characteristics such a the origin and destination of the ballistic projectile. 8 figs.

  14. Ballistic projectile trajectory determining system

    DOE Patents [OSTI]

    Karr, Thomas J.

    1997-01-01

    A computer controlled system determines the three-dimensional trajectory of a ballistic projectile. To initialize the system, predictions of state parameters for a ballistic projectile are received at an estimator. The estimator uses the predictions of the state parameters to estimate first trajectory characteristics of the ballistic projectile. A single stationary monocular sensor then observes the actual first trajectory characteristics of the ballistic projectile. A comparator generates an error value related to the predicted state parameters by comparing the estimated first trajectory characteristics of the ballistic projectile with the observed first trajectory characteristics of the ballistic projectile. If the error value is equal to or greater than a selected limit, the predictions of the state parameters are adjusted. New estimates for the trajectory characteristics of the ballistic projectile are made and are then compared with actual observed trajectory characteristics. This process is repeated until the error value is less than the selected limit. Once the error value is less than the selected limit, a calculator calculates trajectory characteristics such a the origin and destination of the ballistic projectile.

  15. 2015 Secretarial Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Secretarial Determination 2015 Secretarial Determination On May 1, 2015, the Secretary of Energy determined that continued uranium transfers for cleanup services at the Portsmouth Gaseous Diffusion Plant and for down-blending of highly-enriched uranium to low-enriched uranium will not have an adverse material impact on the domestic uranium mining, conversion, or enrichment industry ("2015 Secretarial Determination"). This Determination covers continued transfers at the rates specified

  16. cx-aerial-saw-fall-2009.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  17. cx-aerial-saw-fall-2010.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  18. Aerial Flyover of New Research Facilities

    ScienceCinema (OSTI)

    None

    2013-05-28

    The Idaho National Laboratory is focused on continued development of its primary campus areas, including our Idaho Falls campus, to enable the INL to meet DOE expectations as the nations lead nuclear energy laboratory. This video identifies some of the existing Idaho Falls campus facilities and highlights planned and potential future development to support campus growth. You can learn more about INL's energy research projects at http://www.facebook.com/idahonationallaboratory.

  19. ADMINISTRATIVE RECORDS SCHEDULE 17: CARTOGRAPHIC, AERIAL PHOTOGRAPHIC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    activities. Many of these records have continuing historical value after they are no longer of use to the Department. This records schedule covers only disposable records

  20. ADMINISTRATIVE RECORDS SCHEDULE 17: CARTOGRAPHIC, AERIAL PHOTOGRAPHIC,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARCHITECTURAL, ENGINEERING, AND FACILITY MANAGEMENT RECORDS | Department of Energy activities. Many of these records have continuing historical value after they are no longer of use to the Department. This records schedule covers only disposable records

  1. ADMINISTRATIVE RECORDS SCHEDULE 17: CARTOGRAPHIC, AERIAL PHOTOGRAPHIC,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARCHITECTURAL, ENGINEERING, AND FACILITY MANAGEMENT RECORDS | Department of Energy activities

  2. Aerial Measuring System | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    These trained experts are in charge of maintaining a state of readiness to respond to a radiological emergency at any time. The team is based out of Nellis AirForce Base in Las ...

  3. Ed Westcotts photography goes on the road

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    photographer Ed Westcott, is going on the road. The Oak Ridge Secret City Photographic History Exhibit consists of selected images from many of Westcott's works that have...

  4. Using 360 degree photography as a decommissioning tool

    SciTech Connect (OSTI)

    LEBARON, G.J.

    2003-05-06

    Digital cameras, in conjunction with computer software, make possible 360{sup o} photos allowing a person to look all around, up and down, and zoom in or out. Multiple 360{sup o} photos can be linked creating a virtual tour. Other information, such as sound files, flat photos and text can also be attached to the photos. A virtual tour of a building or room can be used for facility documentation, informing management and others, work planning and orientation, training and historical documentation, thus minimizing the need to re-enter hazardous areas. Reducing entries decreases exposure, increases safety and efficiency, and minimizes waste.

  5. 360 Degree Photography to Decrease Exposure, Increase Safety & Minimize Waste

    SciTech Connect (OSTI)

    LEBARON, G.J.

    2002-01-31

    High-resolution digital cameras, in conjunction with software techniques. make possible 360{sup o} photos that allow a person to look all around, up and dawn, and zoom in or out. The software provides the opportunity to attach other information to a 360{sup o} photo such as sound tiles, flat photos (providing additional detail about what is behind a panel or around a corner) and text (Information which can be used to show radiological conditions or identify other hazards not readily visible). The software also allows other 360{sup o} photos to be attached creating a virtual tour where the user can move from area to area, and stop, study and zoom in on areas of interest. A virtual tour of a building or room can be used for facility documentation, informing management and others, work planning and orientation, and training, thus minimizing the need to re-enter hazardous radioactive areas. Reducing entries decreases exposure, increases safety and minimizes waste.

  6. Categorical Exclusion Determinations: B1.36

    Broader source: Energy.gov [DOE]

    B1.36: Determinations of excess real propertyDeterminations that real property is excess to the needs of DOE and, in the case of acquired real property, the subsequent reporting of such...

  7. CX-004531: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determination CX-004531: Categorical Exclusion Determination Surprise Valley Multiple Use Geothermal Development CX(s) Applied: A9, B3.1, B5.12 Date: 11242010 Location(s):...

  8. CX-100322 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-100322 Categorical Exclusion Determination Plug and Play Photovoltaics for American Homes Award Number: DE-EE0006035 CX(s) Applied: A9, B3.6, B5.15...

  9. CX-100193 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-100193 Categorical Exclusion Determination Installation of Solar Panels at Municipal Owned Facilities Award Number: DE-EE0003195 CX(s) Applied: B5.1...

  10. Categorical Exclusion Determinations: Intelligence and Counterintelligence

    Energy Savers [EERE]

    | Department of Energy Intelligence and Counterintelligence Categorical Exclusion Determinations: Intelligence and Counterintelligence Categorical Exclusion Determinations issued by Intelligence and Counterintelligence. DOCUMENTS AVAILABLE FOR DOWNLOAD No downloads found for this office.

  11. Categorical Exclusion Determinations: Western Area Power Administration |

    Energy Savers [EERE]

    Department of Energy Administration Categorical Exclusion Determinations: Western Area Power Administration Categorical Exclusion Determinations issued by Western Area Power Administration. DOCUMENTS AVAILABLE FOR DOWNLOAD No downloads found for this office.

  12. CX-100317 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Categorical Exclusion Determination CX-100317 Categorical Exclusion Determination Solar Hot Water Project in Greenburgh, NY Award Number: DE-EE0003193 CX(s) Applied: B5.16...

  13. Categorical Exclusion Determinations: Program and Field Offices |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Determinations: Program and Field Offices Categorical Exclusion Determinations: Program and Field Offices This page contains links (below) to pages on DOE Program, Field, or Site Office websites containing the CX determinations required to be posted under this policy, and also some for which documentation and posting are optional, i.e., determinations involving classes of actions listed in Appendix A or made before the policy's effective date of November 2, 2009. You may

  14. NREL Programmatic NEPA Determinations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Programmatic NEPA Determinations NREL Programmatic NEPA Determinations The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy has developed five Programmatic NEPA Determinations (PND) to address routine activities and ongoing research conducted at National Renewable Energy Laboratory (NREL) facilities. These determinations were conducted as part of a joint DOE and NREL NEPA Enhancement Project that was developed to help streamline the NEPA process for activities

  15. POLICY GUIDANCE MEMORANDUM #26 Official Worksite Determinations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 6 Official Worksite Determinations POLICY GUIDANCE MEMORANDUM #26 Official Worksite Determinations The following information is provided to assist in determinations of official worksites for remote workers. This guidance applies to Federal employees and employees hired under the Intergovernmental Personnel Act (IPA). PDF icon POLICY GUIDANCE MEMORANDUM #26 Official Worksite Determinations Responsible Contacts Ahtora Brooks Human Resource Specialists E-mail

  16. Categorical Exclusion Determinations: Oregon | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act: Crump Geyser - High Precision Geophysics & ... Novel Hybrid Microbial Electrochemical System for Efficient ... Determination Microchannel Solar Receiver Development Award ...

  17. Categorical Exclusion Determinations: Advanced Technology Vehicles

    Energy Savers [EERE]

    Manufacturing Loan Program | Department of Energy Technology Vehicles Manufacturing Loan Program Categorical Exclusion Determinations: Advanced Technology Vehicles Manufacturing Loan Program Categorical Exclusion Determinations issued by Advanced Technology Vehicles Manufacturing Loan Program. DOCUMENTS AVAILABLE FOR DOWNLOAD September 6, 2011 CX-006488: Categorical Exclusion Determination Chrysler Group LLC, Revised Specific Project Application 2, Retooling, Reequipping and Engineering

  18. Categorical Exclusion Determinations: NNSA-Proliferation Detection |

    Energy Savers [EERE]

    Department of Energy Proliferation Detection Categorical Exclusion Determinations: NNSA-Proliferation Detection Categorical Exclusion Determinations issued by NNSA-Proliferation Detection. DOCUMENTS AVAILABLE FOR DOWNLOAD September 17, 2010 CX-004080: Categorical Exclusion Determination Fisk University Nonproliferation Grant CX(s) Applied: B3.6 Date: 09/17/2010 Location(s): Tennessee Office(s): NNSA-Proliferation Detection

  19. Categorical Exclusion Determinations: Southeastern Power Administration |

    Energy Savers [EERE]

    Department of Energy Southeastern Power Administration Categorical Exclusion Determinations: Southeastern Power Administration Categorical Exclusion Determinations issued by Southeastern Power Administration. DOCUMENTS AVAILABLE FOR DOWNLOAD August 3, 2009 CX-000478: Categorical Exclusion Determination Proposed rate adjustment for the Jim Woodruff System CX(s) Applied: B4.3 Date: 08/03/2009 Location(s): Panhandle, Florida Office(s): Southeastern Power Administration

  20. CX-100327 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-100327 Categorical Exclusion Determination Proposed Rulemaking for Energy Conservation Standards for Commercial Water Heating Equipment RIN: 1904-AD34 CX(s)...

  1. CX-009019: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DEVELOPMENT AND FULL-SCALE TESTING CX-009001: Categorical Exclusion Determination Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics

  2. Perlick: Noncompliance Determination (2013-SE-14001)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Perlick Corporation finding that freezer basic model HP24F does not comport with the energy conservation standards.

  3. Perlick: Noncompliance Determination (2013-SE-14002)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Perlick Corporation finding that refrigerator basic model HP48RR does not comport with the energy conservation standards.

  4. Hydac: Noncompliance Determination (2012-SE-4107)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Hydac Technology Corporation finding that a variety of electric motor basic models do not comport with the energy conservation standards.

  5. Mueller Streamline: Noncompliance Determination (2011-SW-2802)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Mueller Streamline Co. finding that faucet model 120-003NL does not comport with the water conservation standards.

  6. Whirlpool: Noncompliance Determination (2013-SE-1420)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Whirlpool Corporation finding that refrigerator-freezer basic model 8TAR81 does not comport with the energy conservation standards.

  7. CX-010763: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-010763: Categorical Exclusion Determination Nevada Desert Research Institute- Photovoltaic Installation CX(s) Applied: B5.16 Date: 07172013 Location(s): Nevada Offices(s):...

  8. CX-003980: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-003980: Categorical Exclusion Determination Integration of Advanced Logistical Systems ... a comprehensive biomass supply chain system through collecting and deliver of ...

  9. Categorical Exclusion Determinations: Golden Field Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination U.S. Department of Energy Collegiate Entrepreneurship Prize Award Number: TBD FOA CX(s) Applied: A9 Date: 12222014 Location(s): CO...

  10. CX-006520: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006520: Categorical Exclusion Determination High Energy Density Distributed Hydrostatic Direct Drive for Large Wind Turbine and Marine Hydro-Kinetic Device Applications CX(s) ...

  11. CX-003608: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-003608: Categorical Exclusion Determination Sustainable Algal Energy Production and Environmental Remediation CX(s) Applied: A9, B3.6 Date: 08252010 Location(s): Virginia ...

  12. CX-006863: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006863: Categorical Exclusion Determination Production ... Minnesota Office(s): Energy Efficiency and Renewable ... aims to establish a sustainable supply of ...

  13. CX-001627: Categorical Exclusion Determination | Department of...

    Office of Environmental Management (EM)

    CX-001627: Categorical Exclusion Determination Test Reactor Cask Implementation CX(s) ... This proposed action is a process and facility modification. The Advanced Test Reactor ...

  14. Methods for threshold determination in multiplexed assays

    DOE Patents [OSTI]

    Tammero, Lance F. Bentley; Dzenitis, John M; Hindson, Benjamin J

    2014-06-24

    Methods for determination of threshold values of signatures comprised in an assay are described. Each signature enables detection of a target. The methods determine a probability density function of negative samples and a corresponding false positive rate curve. A false positive criterion is established and a threshold for that signature is determined as a point at which the false positive rate curve intersects the false positive criterion. A method for quantitative analysis and interpretation of assay results together with a method for determination of a desired limit of detection of a signature in an assay are also described.

  15. Categorical Exclusion Determinations: Idaho | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... June 18, 2015 CX-013839: Categorical Exclusion Determination Materials and Fuels Complex (MFC)-752 Analytical Laboratory Casting Laboratory Glovebox Heat Detection CX(s) Applied: ...

  16. CX-008761: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-008761: Categorical Exclusion Determination Surface Water and Groundwater Sampling Near the Naturita, Colorado Title I Uranium Mill Tailings Radiation Control Act (UMTRCA) ...

  17. CX-100596 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by DOE under the Assisting Federal Facilities with Energy Conservation ... This conditional NEPA determination applies solely to preliminary design and project planning ...

  18. CX-100343 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-100343 Categorical Exclusion Determination RPM Solar Asset Management Software Award ... Management to develop a cloud based software platform that manages the financial and ...

  19. CX-000321: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-000321: Categorical Exclusion Determination Kentucky Revision 2 - Green and Healthy ...232009 Location(s): Kentucky Office(s): Energy Efficiency and Renewable Energy, National ...

  20. CX-000322: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-000322: Categorical Exclusion Determination Kentucky Revision 2 - Green Bank of Kentucky Date: 11232009 Location(s): Kentucky Office(s): Energy Efficiency and Renewable ...

  1. Categorical Exclusion Determinations: National Energy Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratory September 9, 2014 CX-012155: Categorical Exclusion Determination Subsea High Voltage Direct Current Connectors for Environmentally Safe and Reliable Powering of UDW... ...

  2. CX-004649: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Painesville Municipal Power Vanadium Redox Battery Demonstration Program CX(s) ... CX-006145: Categorical Exclusion Determination Fact Sheet: Vanadium Redox Battery ...

  3. Categorical Exclusion Determinations: Oklahoma | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... June 17, 2013 CX-010520: Categorical Exclusion Determination Silica Polymer Initiator ... PetrophysicsTight Rock Characterization for Improved Stimulation and Production ...

  4. Felix Storch: Noncompliance Determination (2010-SCE-0111)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Felix Storch finding that basic model FS62, a compact upright freezer, does not comport with the energy conservation standards.

  5. Morris: Noncompliance Determination (2013-SE-5403)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Morris Products, Inc. finding that various models of metal halide lamp fixtures do not comport with the energy conservation standards.

  6. CX-006211: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination Missouri Independent Energy Efficiency Program: Henniges Automotive - Process Air Compressor Upgrades CX(s) Applied: B5.1 Date: 07182011 Location(s):...

  7. CX-013404: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-013404: Categorical Exclusion Determination NARUCDOE Natural Gas Infrastructure and Liquefied Natural Gas Partnership CX(s) Applied: A9, A11 Date: 02092015 Location(s): ...

  8. CX-000294: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-000294: Categorical Exclusion Determination A Novel Biogas Desulphurization Sorbent ... gas, providing an essentially sulfur-free biogas for Direct Fuel Cell? power plants. ...

  9. CX-000293: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-000293: Categorical Exclusion Determination A Novel Biogas Desulphurization Sorbent ... gas, providing an essentially sulfur-free biogas for Direct Fuel Cell? power plants. ...

  10. CX-001856: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination Rural Cooperative Geothermal Development Electric and Agriculture CX(s) Applied: B3.1 Date: 04282010 Location(s): Paisley, Oregon Office(s): Energy...

  11. Categorical Exclusion Determinations: Bonneville Power Administration...

    Energy Savers [EERE]

    Power Administration July 9, 2015 CX-013781: Categorical Exclusion Determination Acquisition of Multiple Access Road Easements for the Holcomb-Naselle No. 1 Transmission Line ...

  12. DNA Sequence Determinants Controlling Affinity, Stability and...

    Office of Scientific and Technical Information (OSTI)

    the Nucleoid Protein Fis Citation Details In-Document Search Title: DNA Sequence Determinants Controlling Affinity, Stability and Shape of DNA Complexes Bound by the Nucleoid ...

  13. CX-003703: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determination Florida Hydrogen Initiative - Florida Institute of Technology (Interdisciplinary Hydrogen and Fuel Cell Technology Academic Program) CX(s) Applied: A9 Date: 09...

  14. CX-011250: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determination Transforming Photovoltaic Installations Toward Dispatchable, Schedulable Energy Solutions CX(s) Applied: B3.6, B5.15 Date: 10172013 Location(s): Oregon...

  15. CX-100138 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-100138 Categorical Exclusion Determination Sacrificial Protective Coating Materials ... a chemically resistant and anti-fouling coating for low-cost Weak Black Liquor (WBL) ...

  16. Categorical Exclusion Determinations: North Carolina | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Texas, Massachusetts Offices(s): Golden Field Office November 27, 2013 CX-011733: Categorical Exclusion Determination Research Triangle Institute - High Operating Temperature ...

  17. Zoe Industries: Noncompliance Determination (2011-SW-2912)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Zoe Industries, Inc. finding that Giessdorf 150043 model, a showerhead, does not comport with the water conservation standards.

  18. Arelik A.?: Compliance Determination (2010-SE-0105)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Compliance Determination after test results revealed that Arelik's Blomberg BRFB1450 refrigerator-freezer complies with the applicable energy conservation standards.

  19. Categorical Exclusion Determinations: Nuclear Energy | Department...

    Energy Savers [EERE]

    ... June 17, 2015 CX-013826: Categorical Exclusion Determination Assessment of Aging Degradation Mechanisms of Alloy 709 for Sodium Fast Reactors - Colorado School of Mines CX(s) ...

  20. CX-005301: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    wind turbine(s); conducting business and organizational planning to determine whether a wind-diesel plant is feasible; developing and conducting educational and informational...

  1. CX-006215: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006215: Categorical Exclusion Determination Oklahoma State Energy Program American Recovery and Reinvestment Act - Oklahoma Department of Commerce Large System Application ...

  2. CX-006216: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006216: Categorical Exclusion Determination Oklahoma State Energy Program American Recovery and Reinvestment Act - Oklahoma Municipal Power Authority Large System Request R ...

  3. CX-005432: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-005432: Categorical Exclusion Determination Oklahoma State Energy Program American Recovery and Reinvestment Act - Oklahoma Municipal Power Authority Large System Rebate Request ...

  4. CX-003838: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-003838: Categorical Exclusion Determination Demolition of the X-605 H Booster Pump ... The proposed action involves the demolition of the X-605 H Booster Pump House Building, ...

  5. ET Industries: Noncompliance Determination (2012-SE-2902)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to ET Industries, Inc. finding that showerhead basic model TH-1 does not comport with the water conservation standards.

  6. CX-009166: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-009166: Categorical Exclusion Determination Bioelectrochemical Integration of Waste Heat Recovery, Waste-to-Energy Conversion, and Waste-to-Chemical Conversion with Industrial ...

  7. Categorical Exclusion Determinations: New Jersey | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 1, 2014 CX-012497: Categorical Exclusion Determination Geophysical and Mineralogical Controls on the Rheology of Fracture Slip... CX(s) Applied: B3.6 Date: 41852 ...

  8. CX-002452: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assessment of the Environmental Effects of Hydrokinetic Turbines on Fish CX(s) Applied: ... to determine injury and survival rates for fish passing through hydrokinetic turbines. ...

  9. CX-002506: Categorical Exclusion Determination | Department of...

    Energy Savers [EERE]

    CX-002506: Categorical Exclusion Determination Rhode Island Commercial and Industrial Energy Efficiency Initiative CX(s) Applied: A9, A11, B5.1 Date: 06012010...

  10. CX-010272: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-010272: Categorical Exclusion Determination Chesapeake Light Tower Survey, ... The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory is proposing to ...

  11. CX-001068: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-001068: Categorical Exclusion Determination Analysis of Energy, Environmental, and Life Cycle Cost Reduction Potential of Ground Source Heat Pumps in Hot and Humid Climate CX(s) ...

  12. CX-010269: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-010269: Categorical Exclusion Determination Renewable Energy Initiatives for Clark ... The U.S. Department of Energy (DOE) is proposing to provide federal funding to the Clark ...

  13. CX-005846: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-005846: Categorical Exclusion Determination Wood Pole Replacement and Minor Access Road Maintenance Along Various Transmission Line Rights-Of-Way in the Wenatchee District CX(s) ...

  14. CX-100229 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-100229 Categorical Exclusion Determination Center for Ocean Renewable Energy (CORE) ... of New Hampshire (UNH) Center for Ocean Renewable Energy (CORE) to develop a tidal ...

  15. Categorical Exclusion Determinations: Missouri | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 7, 2016 CX-100535 Categorical Exclusion Determination Large Scale GSHP as Alternative Energy for American Farmers: Technical Demonstration & Business Approach Award Number: ...

  16. CX-004656: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-004656: Categorical Exclusion Determination Small Wind Turbine Regional Test Center - Otisco, New York; National Renewable Energy Laboratory Tracking Number 10-028 CX(s) ...

  17. Electrolux: Compliance Determination (2010-SE-0108)

    Broader source: Energy.gov [DOE]

    After conducting testing of Electrolux's Frigidaire chest freezer model FFN09M5HWC, DOE determined that the model met the applicable energy conservation standard.

  18. Vitrification Melter Waste Incidental to Reprocessing Determination...

    Office of Environmental Management (EM)

    Reprocessing Determination For The West Valley Demonstration Project Concentrator Feed Makeup Tank and Melter Feed Hold Tank Responses to Public Comments on Draft Vitrification...

  19. CX-007901: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-007901: Categorical Exclusion Determination Improving Atmospheric Models for Offshore Wind Resource Mapping and Prediction Using LIDAR, Aircraft, and In-Ocean...

  20. Categorical Exclusion Determinations: Alabama | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... September 17, 2013 CX-010944: Categorical Exclusion Determination Daikin Advanced Lithium Ion Battery Technology - High Voltage Electrolyte CX(s) Applied: B3.6 Date: 09172013 ...

  1. Categorical Exclusion Determinations: Illinois | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... March 9, 2015 CX-013445: Categorical Exclusion Determination Scale Up of Lithium Ion Battery Material Recycling, Building 369 CX(s) Applied: B3.6 Date: 03092015 ...

  2. Watermark: Noncompliance Determination (2011-SW-2908)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Watermark Designs, Ltd. finding that model SH-FAL-90, a showerhead, does not comport with the water conservation standards.

  3. Categorical Exclusion Determinations: Savannah River Operations...

    Office of Environmental Management (EM)

    Savannah River Operations Office Categorical Exclusion Determinations: Savannah River ... Install Concrete Block Bins for Additional Rock Storage at MOX Batch Plant CX(s) Applied: ...

  4. Caldicellulosiruptor Core and Pangenomes Reveal Determinants...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Caldicellulosiruptor Core and Pangenomes Reveal Determinants for Citation Details In-Document Search Title: Caldicellulosiruptor Core and Pangenomes Reveal ...

  5. Determining Memory Use | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Allinea DDT Core File Settings Determining Memory Use Using VNC with a Debugger bgqstack gdb Coreprocessor Runjob termination TotalView Performance Tools & APIs Software &...

  6. Categorical Exclusion Determinations: Maryland | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... May 27, 2014 CX-012134: Categorical Exclusion Determination Development of Advanced CFD Tools for Enhanced Prediction of Explosion Pressure Development and ... CX(s) Applied: A9, ...

  7. Categorical Exclusion Determinations: Ohio | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... August 12, 2014 CX-012681: Categorical Exclusion Determination Experimental Investigation and CFD Analysis of Steam Ingress Accidents in HTGRs - Ohio State University CX(s) ...

  8. CX-001207: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-001207: Categorical Exclusion Determination Grid-Scale Energy Storage Demonstration for ... of UltraBattery modules, integrated in a turnkey battery energy storage system (BESS). ...

  9. CX-009199: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-009199: Categorical Exclusion Determination Access Road Improvement For the ... Bonneville Power Administration proposes to perform access road maintenance on several ...

  10. Categorical Exclusion Determinations: Idaho Operations Office...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 5, 2015 CX-013679: Categorical Exclusion Determination In situ Raman Spectroscopy to Enhance Nuclear Materials Research and Education- University of Nevada Reno CX(s) Applied: ...

  11. Categorical Exclusion Determinations: Advanced Research Projects...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... November 19, 2013 CX-011740: Categorical Exclusion Determination Stanford University - Robust Multifunctional Battery Chassis Systems for Automotive Applications CX(s) Applied: ...

  12. Categorical Exclusion Determinations: Arkansas | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... February 7, 2011 CX-007795: Categorical Exclusion Determination Easement Acquisition, Carroll County, Arkansas CX(s) Applied: B1.24 Date: 02072011 Location(s): Arkansas ...

  13. Categorical Exclusion Determinations: Southwestern Power Administratio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... February 7, 2011 CX-007795: Categorical Exclusion Determination Easement Acquisition, Carroll County, Arkansas CX(s) Applied: B1.24 Date: 02072011 Location(s): Arkansas ...

  14. Zinc Speciation in Contaminated Sediments: Quantitative Determination...

    Office of Scientific and Technical Information (OSTI)

    Zinc Speciation in Contaminated Sediments: Quantitative Determination of Zinc Coordination by X-ray Absorption Spectroscopy Citation Details In-Document Search Title: Zinc ...

  15. Categorical Exclusion Determinations: Golden Field Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Date: 03252015 Location(s): Nationwide Office(s): Golden Field Office March 24, 2015 CX-100203 Categorical Exclusion Determination Solar Hot Water Project in Greenburgh,...

  16. Categorical Exclusion Determinations: Vermont | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 27, 2016 CX-100465 Categorical Exclusion Determination Training for State Officials to Make Solar More Inclusive, Affordable, and Consumer Friendly Award Number: ...

  17. CX-002955: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-002955: Categorical Exclusion Determination Hawaii Hydrogen Power Park - Technology ... for use in the Hawaii Volcano National Park system (HAVO) on the Big Island of Hawaii. ...

  18. Determination Of Ph Including Hemoglobin Correction

    DOE Patents [OSTI]

    Maynard, John D.; Hendee, Shonn P.; Rohrscheib, Mark R.; Nunez, David; Alam, M. Kathleen; Franke, James E.; Kemeny, Gabor J.

    2005-09-13

    Methods and apparatuses of determining the pH of a sample. A method can comprise determining an infrared spectrum of the sample, and determining the hemoglobin concentration of the sample. The hemoglobin concentration and the infrared spectrum can then be used to determine the pH of the sample. In some embodiments, the hemoglobin concentration can be used to select an model relating infrared spectra to pH that is applicable at the determined hemoglobin concentration. In other embodiments, a model relating hemoglobin concentration and infrared spectra to pH can be used. An apparatus according to the present invention can comprise an illumination system, adapted to supply radiation to a sample; a collection system, adapted to collect radiation expressed from the sample responsive to the incident radiation; and an analysis system, adapted to relate information about the incident radiation, the expressed radiation, and the hemoglobin concentration of the sample to pH.

  19. Determining Price Reasonableness in Federal ESPCs

    SciTech Connect (OSTI)

    Shonder, J.A.

    2005-03-08

    This document reports the findings and implementation recommendations of the Price Reasonableness Working Group to the Federal ESPC Steering Committee. The working group was formed to address concerns of agencies and oversight organizations related to pricing and fair and reasonable price determination in federal energy savings performance contracts (ESPCs). This report comprises the working group's recommendations and is the proposed draft of a training curriculum on fair and reasonable price determination for users of federal ESPCs. The report includes: (1) A review of federal regulations applicable to determining price reasonableness of federal ESPCs (section 2), (2) Brief descriptions of the techniques described in Federal Acquisition Regulations (FAR) 15.404-1 and their applicability to ESPCs (section 3), and (3) Recommended strategies and procedures for cost-effectively completing price reasonableness determinations (sections 4). Agencies have struggled with fair and reasonable price determinations in their ESPCs primarily because this alternative financing vehicle is relatively new and relatively rare in the federal sector. The methods of determining price reasonableness most familiar to federal contracting officers (price competition based on the government's design and specifications, in particular) are generally not applicable to ESPCs. The regulatory requirements for determining price reasonableness in federal ESPCs have also been misunderstood, as federal procurement professionals who are inexperienced with ESPCs are further confused by multiple directives, including Executive Order 13123, which stresses life-cycle cost-effectiveness. Uncertainty about applicable regulations and inconsistent practice and documentation among agencies have fueled claims that price reasonableness determinations have not been sufficiently rigorous in federal ESPCs or that the prices paid in ESPCs are generally higher than the prices paid for similar goods and services obtained through conventional procurements. While claims of excessive prices are largely unsubstantiated and based on anecdotal evidence, the perception that there is a problem is shared by many in the ESPC community and has been noted by auditors and oversight organizations. The Price Reasonableness Working Group determined that a more formal emphasis on FAR 15.404-1 in the ESPC process could remove much of the doubt about price reasonableness determinations. The working group's recommended consensus policy on price reasonableness stresses the price analysis techniques described in the FAR that are applicable to ESPCs and includes guidance for agencies use of these techniques in determining price reasonableness for their ESPC delivery orders. The recommended policy and guidance, if communicated to federal ESPC stakeholders, can ensure that agencies will comply with the FAR in awarding ESPCs, obtain fair and reasonable prices and best value for the government, and follow procedures that provide auditable documentation of due diligence in price reasonableness determinations.

  20. Haier: Noncompliance Determination (2011-SE-1408)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Haier America Trading, L.L.C. finding that model number HNCM070, a chest freezer, does not comport with the energy conservation standards.

  1. Categorical Exclusion Determinations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    under the Department's NEPA regulations (10 CFR Part 1021) and NEPA Order (DOE Order 451.1B) to document and post online its categorical exclusion (CX) determinations involving ...

  2. CX-001862: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-001862: Categorical Exclusion Determination Clearwater Campus District Cooling - Activity 3 CX(s) Applied: B3.6, A1, B5.1 Date: 04192010 Location(s): Pinellas County, Florida ...

  3. Central Moloney: Noncompliance Determination (2013-SE-4702)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Central Moloney, Inc. finding that liquid-immersed distribution transformer basic models 30300150 and 32500095 do not comport with the energy conservation standards.

  4. Everest Refrigeration: Noncompliance Determination (2015-SE-42001)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Bu Sung America Corporation (dba Everest Refrigeration) finding that commercial refrigeration equipment model number ESGR3 does not comport with the energy conservation standards.

  5. Universal: Noncompliance Determination (2013-SE-26004)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Universal Lighting Technologies, Inc. finding that fluorescent lamp ballast model B140R277HP does not comport with the energy conservation standards.

  6. Cooper: Noncompliance Determination (2012-SE-4701)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Cooper Power Systems, LLC finding that basic models 277-99.28, 277-99.26, and 277-99.22 of distribution transformers do not comport with the energy conservation standards.

  7. Harrington: Noncompliance Determination (2014-SW-28011)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Harrington Brass Works finding that kitchen faucet individual model 20-210-026 does not comport with the water conservation standards.

  8. Whirlpool: Compliance Determination (2010-SE-0103)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Compliance Determination to Whirlpool Corporation after DOE testing confirmed that the Maytag refrigerator-freezer model MSD2578VE comports with the applicable energy conservation standard.

  9. Islandaire: Noncompliance Determination (2015-SE-43009)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Islandaire, Inc. finding that the Islandaire package terminal air conditioner basic model CPZ-07ANR1-B, which includes model EZDR07B, does not comport with the applicable energy conservation standards.

  10. Utility: Noncompliance Determination (2016-SE-42003)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Utility Refrigerator finding that commercial refrigeration equipment basic model number PT-R-75-SS-3S-3S-N does not comport with the energy conservation standards.

  11. Bigwall: Noncompliance Determination (2014-SE-15006)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Bigwall Enterprises, Inc. finding that PerfectAire brand model PACH8000 ("Bigwall model PACH8000") of room air conditioners do not comport with the energy conservation standards.

  12. Mile High: Noncompliance Determination (2012-SE-4501)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Mile High Equipment, LLC finding that Ice-O-Matic brand automatic commercial ice maker basic model ICE2106 FW, HW does not comport with the energy conservation standards.

  13. Sunshine Lighting: Noncompliance Determination (2014-SE-54008)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Sunshine Lighting Company finding that Sunlite brand metal halide lamp fixture basic models 04937-SU, 04938-SU, 04952 SU, and 04956 SU do not comport with the energy conservation standards.

  14. Engineered Products: Noncompliance Determination (2012-SE-5401)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Engineered Products Company finding that basic model 15701 of metal halide lamp fixture does not comport with the energy conservation standards.

  15. CX-007373: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-007373: Categorical Exclusion Determination Minnesota-City-Lakeville CX(s) Applied: B1.32, B2.5, B5.1 Date: 11222011 Location(s): Minnesota Offices(s): Energy Efficiency and ...

  16. CX-006218: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006218: Categorical Exclusion Determination Aptera All-Electric and Hybrid Electric Vehicles CX(s) Applied: B1.31, B5.1 Date: 06202011 Location(s): Grand Rapids, Michigan ...

  17. CX-007065: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination Slipstream Pilot-Scale Demonstration of a Novel Amine-Based Post-Combustion Technology for Carbon Dioxide Capture CX(s) Applied: B3.6...

  18. Categorical Exclusion Determinations: Other Location | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Propulsion Program March 27, 2015 CX-013774: Categorical Exclusion Determination Contra Costa Soil Testing and Equipment Upgrades CX(s) Applied: B4.6, B4.11 Date: 03272015 ...

  19. CX-002794: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-002794: Categorical Exclusion Determination Advanced Implementation of A123's Community Energy Storage (CES) System for Grid Support CX(s) Applied: B4.6, B5.1 Date: 06252010 ...

  20. CX-010745: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-010745: Categorical Exclusion Determination America Saves Energizing Main Street Small Businesses CX(s) Applied: A9, A11 Date: 08162013 Location(s): CX: none Offices(s): ...

  1. Fuzhou Sunlight: Noncompliance Determination (2010-SE-1402)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Fuzhou Sunlight Lighting Electrical Appliance Co., Ltd. finding that a variety of models of incandescent reflector lamps do not comport with the energy conservation standards.

  2. Haier: Noncompliance Determination (2011-SE-1428)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Haier America Trading, LLC finding that Haier model HMCM106EA, a freezer, does not comport with the energy conservation standards.

  3. Aspen: Noncompliance Determination (2010-SE-0305)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Aspen Manufacturing finding that a variety of basic models of split-system air conditioning heat pumps do not comport with the energy conservation standards.

  4. CX-007529: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-007529: Categorical Exclusion Determination Missouri-City-St. Charles CX(s) Applied: ... efficient lighting at City Hall, 2) develop and write "green" building codes for the city. ...

  5. Categorical Exclusion Determinations: Golden Field Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    31, 2015 CX-100349 Categorical Exclusion Determination Advanced Trough with Lower-cost System-architecture (ATLAS) Award Number: DE-EE0007121 CX(s) Applied: A9, B3.6, B5.17...

  6. Categorical Exclusion (CX) Determinations By Date | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    31, 2015 CX-100349 Categorical Exclusion Determination Advanced Trough with Lower-cost System-architecture (ATLAS) Award Number: DE-EE0007121 CX(s) Applied: A9, B3.6, B5.17...

  7. Categorical Exclusion Determinations: Kansas City Site Office...

    Energy Savers [EERE]

    April 1, 2014 CX-012094: Categorical Exclusion Determination Project 1612B Removal and Disposal of Polychlorinated Biphenyls Contaminated Equipment CX(s) Applied: B1.17 Date: 04...

  8. Categorical Exclusion Determinations: West Virginia | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 2, 2014 CX-012402: Categorical Exclusion Determination B-33 Roof Replacement and Fall Protection System Installation CX(s) Applied: B1.3, B2.2, B2.3 Date: 41884 ...

  9. YMGI: Noncompliance Determination (2011-SCE-1605)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to YMGI Group, LLC, finding that YMGI's through-the-wall split system central air conditioner basic model TTWC-18K-31B fails to meet applicable DOE energy conservation standards.

  10. Categorical Exclusion Determinations: Golden Field Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determination Current Energy Harnessing using Synergistic Kinematics of Schools of Fish-Shaped Bodies Award Number: DE-EE0006780 CX(s) Applied: A9, B3.6 Date: 12112014...

  11. Categorical Exclusion Determinations: NNSA-Headquarters | Department...

    Energy Savers [EERE]

    February 8, 2013 CX-010705: Categorical Exclusion Determination National Laser Facility Program Funding Opportunity CX(s) Applied: A1, A9, A11, B3.6 Date: 02082013 Location(s): ...

  12. Categorical Exclusion Determinations: Lawrence Livermore Site...

    Energy Savers [EERE]

    April 16, 2015 CX-013666: Categorical Exclusion Determination Ground-Based Laser Field Experiments CX(s) Applied: B3.11 Date: 04162015 Location(s): California Offices(s): ...

  13. CX-010658: Categorical Exclusion Determination | Department of...

    Office of Environmental Management (EM)

    CX-010658: Categorical Exclusion Determination Analytical Development Laser Maintenance CX(s) Applied: B3.6 Date: 06172013 Location(s): South Carolina Offices(s): Savannah River ...

  14. Cone Penetrometer N Factor Determination Testing Results

    SciTech Connect (OSTI)

    Follett, Jordan R.

    2014-03-05

    This document contains the results of testing activities to determine the empirical 'N Factor' for the cone penetrometer in kaolin clay simulant. The N Factor is used to releate resistance measurements taken with the cone penetrometer to shear strength.

  15. Felix Storch: Noncompliance Determination (2011-SE-1420)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Felix Storch, Inc., finding that model number CF11ES, a chest freezer does not comport with the energy conservation standards.

  16. SRS FTF Section 3116 Basis for Determination

    Broader source: Energy.gov [DOE]

    Basis for Section 3116 Determination for Closure of F-Tank Farm at the Savannah River Site. In accordance with NDAA Section 3116, certain waste from reprocessing of spent nuclear fuel is not high...

  17. Categorical Exclusion Determinations: Nebraska | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 23, 2014 CX-012279: Categorical Exclusion Determination Vertically Aligned Carbon-Nanotubes Embedded in Ceramic Matrices for Hot Electrode Applications CX(s) Applied: B3.6 ...

  18. CX-100101: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-100101: Categorical Exclusion Determination Laufer Wind Group NWTC Structure Lighting Tests; NREL Tracking No. 13-014 Award Number: DE-AC36-08GO28308 CX(s) Applied: A9, B1.31, ...

  19. CX-100252 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-100252 Categorical Exclusion Determination NREL - NWTC Site 3.3 Cable Repair; NREL Tracking No. 15-019 Award Number: DE-AC36-08GO28308 DOEEA 1914 (NREL NWTC) National Renewable ...

  20. CX-001062: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination High-Temperature, High-Pressure Devices for Zonal Isolation in Geothermal Wells CX(s) Applied: A9, B3.6 Date: 03102010 Location(s): Lafayette, Colorado...

  1. CX-009921: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-009921: Categorical Exclusion Determination Technology Research, Development and Tools for Clean Biomass Cookstoves CX(s) Applied: A9, B3.6, B5.15 Date: 01072013...

  2. CX-100270 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determination Proposed Rulemaking for Energy Conservation Standards for Ceiling Fan Light Kits RIN: 1904-AC87 CX(s) Applied: B5.1 EERE- Buildings Technology Program Date:...

  3. CX-100231 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-100231 Categorical Exclusion Determination STM FTLB Groundwater Monitoring Wells, NREL Tracking No. 15-016 Award Number: DE-AC36-08GO28308 CX(s) Applied: B3.1 National...

  4. Lutron Electronics: Noncompliance Determination (2012-SE-3796)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Lutron Electronics Co., Inc. finding that a variety of Class A external power supply basic models do not comport with the energy conservation standards.

  5. Categorical Exclusion Determinations: Nevada Site Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 28, 2009 CX-001377: Categorical Exclusion Determination Nevada Test Site, Area 12 Camp Cafeteria Renovation CX(s) Applied: B1.3 Date: 10282009 Location(s): Nevada ...

  6. Hicon: Noncompliance Determination (2013-SE-1426)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Ningbo Hicon International Industry Company, Ltd. finding that model number BD-200, a compact chest freezer, does not comport with the energy conservation standards.

  7. Categorical Exclusion Determinations: Alaska | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... July 19, 2012 CX-008577: Categorical Exclusion Determination Acoustic Monitoring of Beluga Whale Interactions with Cook Inlet Tidal Energy Project CX(s) Applied: B3.3 Date: 0719...

  8. Precision: Noncompliance Determination (2013-SE-1410)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Precision Trading Corp. finding that Precision brand model Premium PFR515M, a freezer, does not comport with the energy conservation standards.

  9. Patterson: Noncompliance Determination (2011-SW-2911)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Dan Patterson finding that the "ThunderHead" showerhead basic model manufactured by ET Industries, Inc. and imported by Dan Patterson does not comport with the water conservation standards.

  10. Categorical Exclusion Determinations: Loan Guarantee Program...

    Energy Savers [EERE]

    January 24, 2012 CX-007677: Categorical Exclusion Determination Project Eagle Phase 1 Direct WaferCell Solar Facility CX(s) Applied: B1.31 Date: 01242012 Location(s): ...

  11. Categorical Exclusion Determinations: Delaware | Department of...

    Office of Environmental Management (EM)

    ... August 26, 2011 CX-006578: Categorical Exclusion Determination Delaware State Energy Office Sub GranteeBridgeville Well Pump Replacement CX(s) Applied: B5.1 Date: 08262011 ...

  12. Categorical Exclusion Determinations: Iowa | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 25, 2013 CX-011288: Categorical Exclusion Determination 2009 National Biodiesel Foundation Biodiesel Infrastructure Project CX(s) Applied: B5.2, B5.22 Date: 10252013 ...

  13. Bigwall: Noncompliance Determination (2013-SE-1412)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Bigwall Enterprises, Inc. finding that freezer model W1CF106 under the Wellington brand (''the Wellington W1CF106") does not comport with the energy conservation standards.

  14. Categorical Exclusion (CX) Determinations By Date | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination Reducing Soft Costs through Hardware Innovation - Phase II Award Number: DE- EE-0007199 CX(s) Applied: A9, B3.6 Solar Energy Technologies...

  15. CX-003841: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-003841: Categorical Exclusion Determination Demolition and Removal of the X-230J9 North ... Office The demolition and removal of the X-230J9 North Environmental Sampling Building ...

  16. CX-008246: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determination Recovery Act: Tennessee Energy Efficient Schools Initiative Ground Source Heat Pump Program CX(s) Applied: A9, B2.1, B5.19 Date: 05152012 Location(s): Tennessee...

  17. CX-008246: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-008246: Categorical Exclusion Determination Recovery Act: Tennessee Energy Efficient Schools Initiative Ground Source Heat Pump Program CX(s) Applied: A9, B2.1, B5.19 Date: 05...

  18. Categorical Exclusion Determinations: Michigan | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 3, 2016 CX-100561 Categorical Exclusion Determination Current Energy Harnessing using Synergistic Kinematics of Schools of Fish-Shaped Bodies Award Number: DE-EE0006780 CX(s) ...

  19. Categorical Exclusion Determinations: Texas | Department of Energy

    Office of Environmental Management (EM)

    ... June 17, 2015 CX-100294 Categorical Exclusion Determination Texturizing Wind Turbine Towers ... Convert BMT-4 to External Floating Roof Tank (BM-MM-740) (BMT-4) CX(s) Applied: B1.3 ...

  20. Categorical Exclusion Determinations: New Hampshire | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... November 15, 2011 CX-007727: Categorical Exclusion Determination Dartmouth College - Nanocrystalline T-MnAl Permanent Magnets CX(s) Applied: A9, B3.6 Date: 11152011 Location(s): ...

  1. CX-009154: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-009154: Categorical Exclusion Determination Scale-up of Novel Low-Cost Carbon Fibers Leading to High-Volume Commercial Launch CX(s) Applied: A9, B3.6 Date: 09052012 ...

  2. Midea: Noncompliance Determination (2010-SE-0110)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Midea America Corporation finding that basic model number HS-390C, a chest freezer, does not comport with the energy conservation standards.

  3. FY 14 Award Fee Determination Scorecard

    Office of Environmental Management (EM)

    14 Award Fee Determination Scorecard Contractor: Swift and Staley Inc. (SST) Contract: DE-AC30-10CC40021 Award Period: October 1,2013 - September 30,2014 Basis of Evaluation: FY 14 ...

  4. Categorical Exclusion (CX) Determinations By Date | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination Highly Active, Durable, and Ultra-low PGM NSTF Thin Film ORR Catalysts and Supports Award Number: DE-FOA-0007270 CX(s) Applied: A9, B3.6...

  5. Categorical Exclusion Determinations: Golden Field Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination Highly Active, Durable, and Ultra-low PGM NSTF Thin Film ORR Catalysts and Supports Award Number: DE-FOA-0007270 CX(s) Applied: A9, B3.6...

  6. Golden Opportunity: Noncompliance Determination (2013-SE-1418)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Golden Opportunity, Inc. finding that freezer models Golden GFC51 and Golden GFC69 do not comport with the energy conservation standards.

  7. Simkar: Noncompliance Determination (2012-SE-5408)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Simkar Corporation finding that magnetic probe-start and pulse-start basic models of metal halide lamp fixtures do not comport with the energy conservation standards.

  8. Categorical Exclusion Determinations: Colorado | Department of...

    Office of Environmental Management (EM)

    March 7, 2016 CX-100538 Categorical Exclusion Determination ESIF Window Retrofit; NREL Tracking No. 14-018 Award Number: DE-AC36-08GO28308 CX(s) Applied: B1.20 National Renewable ...

  9. Categorical Exclusion Determinations: Hawaii | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    April 6, 2016 CX-100590 Categorical Exclusion Determination Ocean Energy Demonstration of the Ocean Energy (OE) Buoy at US Navy's Wave Energy Test Site Award Number: DE-EE0006924 ...

  10. CX-002682: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-002682: Categorical Exclusion Determination Landfill Gas Utilization Project CX(s) Applied: B5.1 Date: 06082010 Location(s): Madison County, New York Office(s): Energy ...

  11. CX-006627: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006627: Categorical Exclusion Determination Elverta Maintenance Facility Remodel CX(s) Applied: B1.4, B1.15, B2.1, B2.3, B2.5 Date: 08242011 Location(s): Sacramento County, ...

  12. Categorical Exclusion Determinations: RMOTC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applied: B5.4, B5.6 Date: 12302013 Location(s): Wyoming Offices(s): RMOTC July 26, 2013 CX-010688: Categorical Exclusion Determination Optimization Project 3 CX(s) Applied: ...

  13. CX-006232: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006232: Categorical Exclusion Determination Town of Glocester CX(s) Applied: B5.1 Date: 07012011 Location(s): Chapachet, Rhode Island Office(s): Energy Efficiency and ...

  14. CX-002776: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-002776: Categorical Exclusion Determination California-City-Elk Grove CX(s) Applied: B2.5, A9, A11, B5.1 Date: 06152010 Location(s): Elk Grove, California Office(s): Energy ...

  15. CX-006217: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006217: Categorical Exclusion Determination OPOC Engine Manufacturing Project CX(s) Applied: B1.31, B5.1 Date: 06162011 Location(s): Troy, Michigan Office(s): Advanced ...

  16. CX-003520: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-003520: Categorical Exclusion Determination Pontiac High School Geothermal CX(s) Applied: B5.1 Date: 08262010 Location(s): Pontiac, Illinois Office(s): Energy Efficiency and ...

  17. CX-008030: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-008030: Categorical Exclusion Determination Energy Retrofits CX(s) Applied: B5.1 Date: 12012011 Location(s): Nationwide Offices(s): Energy Efficiency and Renewable Energy ...

  18. Midea: Noncompliance Determination (2012-SE-1404)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE issued a Notice of Noncompliance Determination to Midea America Corp. finding that basic models UL-WD195-D and UL-WD145-D of freezers do not comport with the energy conservation standards.

  19. CX-012666: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-012666: Categorical Exclusion Determination Carib Energy (USA) LLC CX(s) Applied: B5.7 Date: 41789 Location(s): Florida Offices(s): Fossil Energy Carib Energy (USA), LLC, a ...

  20. CX-009911: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-009911: Categorical Exclusion Determination Geothermal Retrofit of Illinois National Guard's State Headquarters Building CX(s) Applied: A9, B2.1, B5.19 Date: 01142013 ...

  1. CX-004355: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-004355: Categorical Exclusion Determination Performance Contracting Energy AuditsRetrofitting City Buildings CX(s) Applied: A1, A9, B1.2, B1.4, B2.5, B5.1 Date: 11022010 ...

  2. Philips: Noncompliance Determination (2012-SE-2605)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Philips Lighting Electronics N. A. finding that basic model VEL-I S40-SC, a fluorescent lamp ballast, does not comport with the energy conservation standards.

  3. LG: Noncompliance Determination (2014-SE-15011)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to LG Electronics USA, Inc. finding that room air conditioner basic model LT143CNR does not comport with the energy conservation standards.

  4. Categorical Exclusion Determinations: New Mexico | Department...

    Office of Environmental Management (EM)

    ... July 1, 2014 CX-012357: Categorical Exclusion Determination Shiprock Substation Stormwater Erosion Control Maintenance, San Juan County, New Mexico CX(s) Applied: B1.33 Date: 07...

  5. Categorical Exclusion Determinations: Montana | Department of...

    Energy Savers [EERE]

    March 11, 2015 CX-013448: Categorical Exclusion Determination Taft Substation Retaining Wall and Stormwater Maintenance Project CX(s) Applied: B1.3 Date: 03112015 Location(s): ...

  6. AHT: Noncompliance Determination (2015-SE-42031)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to AHT Cooling Systems, Inc. finding that commercial refrigeration equipment model number RIO S 68 F L R404A does not comport with the energy conservation standards.

  7. Goodman Manufacturing: Noncompliance Determination (2011-SE-4301)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Goodman Manufacturing finding that model CPC180XXX3BXXXAA (CPC180*) of commercial package air conditioner does not comport with the energy conservation standards.

  8. CX-011991: Categorical Exclusion Determination | Department of...

    Office of Environmental Management (EM)

    CX-011991: Categorical Exclusion Determination SoloPower, Inc. Electrodeposition-based Solar Panel Manufacturing Facilities CX(s) Applied: B1.31 Date: 08152011 Location(s): ...

  9. CX-010792: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-010792: Categorical Exclusion Determination Gulf of Mexico Miocene Carbon Dioxide (CO2) Site Characterization Mega Transect - Task 8 CX(s) Applied: A1, A9, A11 Date: 08142013 ...

  10. Demagnetization using a determined estimated magnetic state

    DOE Patents [OSTI]

    Denis, Ronald J; Makowski, Nathanael J

    2015-01-13

    A method for demagnetizing comprising positioning a core within the electromagnetic field generated by a first winding until the generated first electrical current is not substantially increasing, thereby determining a saturation current. A second voltage, having the opposite polarity, is then applied across the first winding until the generated second electrical current is approximately equal to the magnitude of the determined saturation current. The maximum magnetic flux within the core is then determined using the voltage across said first winding and the second current. A third voltage, having the opposite polarity, is then applied across the first winding until the core has a magnetic flux equal to approximately half of the determined maximum magnetic flux within the core.

  11. CX-003720: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination Recovery Act - Los Angeles Department of Water and Power Smart Grid Regional Demonstration Project CX(s) Applied: A9, A11, B3.6, B4.4, B5.1...

  12. Categorical Exclusion Determinations: Maine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... November 30, 2011 CX-007739: Categorical Exclusion Determination University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCDC Converter CX(s) Applied: A9, B3.6 Date: ...

  13. CX-008824: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-008824: Categorical Exclusion Determination X-608 Well Field Transfer CX(s) Applied: ... The wells, well pumps and related underground piping are located within the X-608 well ...

  14. CX-006213: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-006213: Categorical Exclusion Determination Recovery Act: Conducting a 3D Converted Shear Wave Project to Reduce Exploration Risk at Wister, California CX(s) Applied: A9, B3.1, ...

  15. Friedrich: Noncompliance Determination (2014-SE-15010)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Friedrich Air Conditioning Co. finding that room air conditioner basic model SQ10N10 does not comport with the energy conservation standards.

  16. Sanyo: Noncompliance Determination (2013-SE-1428)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Sanyo E & E Corporation finding that model number SBC-500, a compact refrigerator with manual defrost, does not comport with the energy conservation standards.

  17. Substrates and method for determining enzymes

    DOE Patents [OSTI]

    Smith, R.E.; Bissell, E.R.

    1981-10-13

    A method is disclosed for determining the presence of an enzyme in a biological fluid, which includes the steps of contacting the fluid with a synthetic chromogenic substrate, which is an amino acid derivative of 7-amino-4-trifluoromethylcoumarin; incubating the substrate-containing fluid to effect enzymatic hydrolysis; and fluorometrically determining the presence of the free 7-amino-4-trifluoromethylcoumarin chromophore in the hydrolyzate. No Drawings

  18. Substrates and method for determining enzymes

    DOE Patents [OSTI]

    Smith, Robert E. (574 Escondido Cir., Livermore, CA 94550); Bissell, Eugene R. (101 Via Lucia, Alamo, CA 94507)

    1981-01-01

    A method is disclosed for determining the presence of an enzyme in a biological fluid, which includes the steps of contacting the fluid with a synthetic chromogenic substrate, which is an amino acid derivative of 7-amino-4-trifluoromethylcoumarin; incubating the substrate-containing fluid to effect enzymatic hydrolysis; and fluorometrically determining the presence of the free 7-amino-4-trifluoromethylcoumarin chromophore in the hydrolyzate.

  19. Determining Allocation Requirements | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Allocation Management Determining Allocation Requirements Querying Allocations Using cbank Mira/Cetus/Vesta Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Determining Allocation Requirements Estimating CPU-Hours for ALCF Blue Gene/Q Systems When estimating CPU-hours for the ALCF Blue Gene/Q systems, it is important to take into consideration the unique aspects of the Blue Gene

  20. Quantitative determination of atmospheric hydroperoxyl radical

    DOE Patents [OSTI]

    Springston, Stephen R.; Lloyd, Judith; Zheng, Jun

    2007-10-23

    A method for the quantitative determination of atmospheric hydroperoxyl radical comprising: (a) contacting a liquid phase atmospheric sample with a chemiluminescent compound which luminesces on contact with hydroperoxyl radical; (b) determining luminescence intensity from the liquid phase atmospheric sample; and (c) comparing said luminescence intensity from the liquid phase atmospheric sample to a standard luminescence intensity for hydroperoxyl radical. An apparatus for automating the method is also included.

  1. CHPRC Fee Determination Summaries - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CHPRC Fee Determination Summaries DOE-RL Contracts/Procurements RL Contracts & Procurements Home Prime Contracts Current Solicitations Other Sources DOE RL Contracting Officers DOE RL Contracting Officer Representatives CHPRC Fee Determination Summaries Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size CHPRC Fiscal Year 2015 Fee Evaluation Summary CHPRC Fiscal Year 2014 Fee Evaluation Summary CHPRC Fiscal Year 2013 Fee Evaluation Summary CHPRC Fiscal Year 2012

  2. Secretarial Determination for the Sale or Transfer of Uranium...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Secretarial Determination for the Sale or Transfer of Uranium Secretarial Determination for the Sale or Transfer of Uranium Secretarial Determination for the Sale or Transfer of...

  3. Office of Federal Procurement (OFPP) Determination of Executive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Procurement (OFPP) Determination of Executive Compensation Benchmark Amount for ... Office of Federal Procurement (OFPP) Determination of Executive Compensation Benchmark ...

  4. Islandaire: Noncompliance Determination (2015-SE-43008)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Islandaire, Inc. finding that the Islandaire package terminal air conditioner basic model CPZ-129ANR1-B, which includes models EZDR12B and EZD4212B, does not comport with the applicable energy conservation standards.

  5. Midea America: Noncompliance Determination (2014-SEW-20006)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Midea America Corp. finding that residential clothes washer basic model MAE80-S1702GPS, manufactured by Hefei Rongshida Washing Equipment Manufacturing Co., Ltd., a subsidiary of Midea Group, and distributed by Midea America does not comport with the energy and water conservation standards.

  6. Teddico: Noncompliance Determination (2012-SE-5409)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to The Electrical Design, Development and Implementation Company d/b/a Teddico finding that a variety of basic models of magnetic probe-start metal halide lamp fixtures do not comport with the energy conservation standards.

  7. Heat Controller: Noncompliance Determination (2014-SE-15004)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Heat Controller, Inc. finding that the room air conditioner distributed in commerce by Heat Controller as Comfort Aire brand models CGREG-81H and REG-81J does not comport with the energy conservation standards.

  8. Midea: Noncompliance Determination (2013-SE-1505)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to GD Midea Air-Conditioning Equipment Co. Ltd. finding that Arctic King brand room air conditioner basic model MWJ1-08ERN1-BI8, manufactured by Midea, does not comport with the energy conservation standards.

  9. Leader Electronics: Noncompliance Determination (2010-SE-2301)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Leader Electronics, Inc. finding that "NU50-2093400-I3(NU50-21090-300F)" and "MU03-F050040-A1(MU03-Fl050-AKOS)" of external power supplies do not comport with the energy conservation standards.

  10. Aspen: Noncompliance Determination (2011-SE-1602)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Aspen Manufacturing finding that indoor unit model AEW244 and outdoor unit model NCPC-424-3010 of residential split system central air conditioning system do not comport with the energy conservation standards.

  11. Islandaire: Noncompliance Determination (2015-SE-43007)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Islandaire, Inc. finding that the Islandaire package terminal air conditioner basic model CPZ-09ANR1-B, which includes models EZ4209B and EZDR09B, does not comport with the applicable energy conservation standards.

  12. H-Tank Farm Waste Determination

    Broader source: Energy.gov [DOE]

    On Dec. 19, 2014, the Energy Secretary signed a determination that allows the Savannah River Site (SRS) in South Carolina to complete cleanup and closure of the underground liquid waste tanks in the H Tank Farm as they are emptied and cleaned. The action marked a major milestone in efforts to clean up the Cold War legacy at SRS.

  13. Sears: Noncompliance Determination (2011-SE-1418)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Sears, Roebuck & Co. finding that Kenmore-brand model number 255.19502010 ("19502") and Kenmore-brand model number 255.19702010 ("19702"), compact chest freezers, do not comport with the energy conservation standards.

  14. Waist parameter determination from measured spot sizes

    SciTech Connect (OSTI)

    Hajek, M. )

    1989-12-15

    A novel simple method of determination of waist parameters of a Gaussian laser beam as a consequence of geometric treatment of the problem is introduced. The method does not require any least-squares process, ordering of experimental data, or estimates of waist parameters.

  15. CNA: Noncompliance Determination (2013-SE-1430)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to CNA International, Inc., d/b/a MC Appliance Corp. finding that Magic Chef-brand model HMCF7W ("CNA model HMCF7W") does not comport with the energy conservation standards.

  16. CX-002726: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-002726: Categorical Exclusion Determination Energy Efficiency in State Buildings: Health and Human Resources CX(s) Applied: B1.24, B1.28, B1.31, B2.2, A9, B1.5, B5.1 Date: 06...

  17. Midea: Noncompliance Determination (2014-SW-20001)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Hefei Rongshida Washing Equipment Manufacturing Co., Ltd. ("Hefei Rongshida"), a subsidiary of Midea Group, finding that model MAE80-S1702GPS, a residential clothes washer, does not comport with the energy conservation standards.

  18. Equation determines pressure drop in coiled tubing

    SciTech Connect (OSTI)

    Yang, Y.S.

    1995-12-04

    A single equation can determine the pressure drop in wells with laminar, transitional, and turbulent incompressible fluid flow in coiled tubing or other steel tubulars. The single equation is useful, especially in computer-aided design and operations. The equation is derived and illustrated by an example.

  19. CX-011847: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-011847: Categorical Exclusion Determination Routine Maintenance Activities CX(s) Applied: B1.3, B1.4, B1.5, B1.6, B1.7, B1.8, B1.11, B1.13, B1.15, B1.16, B1.17, B1.21, B1.22, ...

  20. Determination of optimal gains for constrained controllers

    SciTech Connect (OSTI)

    Kwan, C.M.; Mestha, L.K.

    1993-08-01

    In this report, we consider the determination of optimal gains, with respect to a certain performance index, for state feedback controllers where some elements in the gain matrix are constrained to be zero. Two iterative schemes for systematically finding the constrained gain matrix are presented. An example is included to demonstrate the procedures.

  1. Categorical Exclusion Determinations: Portsmouth Paducah Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 1, 2011 CX-013541: Categorical Exclusion Determination Utility Reconfiguration in the Process Buildings CX(s) Applied: B1.3, B1.27, B2.1, B2.2, B2.3, B2.5 Date: 03012011 ...

  2. Potentiometric determination of uranium in organic extracts

    SciTech Connect (OSTI)

    Bodnar, L.Z.

    1980-05-01

    The potentimetric determination of uranium in organic extracts was studied. A mixture of 30% TBP, (tributylphosphate), in carbon tetrachloride was used, with the NBL (New Brunswick Laboratory) titrimetric procedure. Results include a comparative analysis performed on organic extracts of fissium alloys vs those performed on aqueous samples of the same alloys which had been treated to remove interfering elements. Also comparative analyses were performed on sample solutions from a typical scrap recovery operation common in the uranium processing industry. A limited number of residue type materials, calciner products, and presscakes were subjected to analysis by organic extraction. The uranium extraction was not hindered by 30% TBP/CCl/sub 4/. To fully demonstrate the capabilities of the extraction technique and its compatibility with the NBL potentiometric uranium determination, a series of uranium standards was subjected to uranium extraction with 30% TBP/CCl/sub 4/. The uranium was then stripped out of the organic phase with 40 mL of H/sub 3/PO/sub 4/, 15 mL of H/sub 2/0, and 1 mL of 1M FeSO/sub 4/ solution. The uranium was then determined in the aqueous phosphoric phase by the regular NBL potentiometric method, omitting only the addition of another 40 mL of H/sub 3/PO/sub 4/. Uranium determinations ranging from approximately 20 to 150 mg of U were successfully made with the same accuracy and precision normally achieved. 8 tables. (DP)

  3. Grainger: Noncompliance Determination (2013-SE-1411)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Grainger International Inc. finding that freezer models, privately labeled as the Dayton 5NTX4, the Dayton 5NTX5, and the Dayton 5NTX6 do not comport with the energy conservation standards.

  4. Pax Global: Noncompliance Determination (2013-SE-1413)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Pax Global, Inc. finding that freezer basic models (1) Crosley CCF51; (2) Crosley CCF69; (3) Crosley CCF106; and (4) Daewoo DCF-106W do not comport with the energy conservation standards.

  5. Analytical Improvements in PV Degradation Rate Determination

    SciTech Connect (OSTI)

    Jordan, D. C.; Kurtz, S. R.

    2011-02-01

    As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined accurately. For non-spectrally corrected data several complete seasonal cycles (typically 3-5 years) are required to obtain reasonably accurate degradation rates. In a rapidly evolving industry such a time span is often unacceptable and the need exists to determine degradation rates accurately in a shorter period of time. Occurrence of outliers and data shifts are two examples of analytical problems leading to greater uncertainty and therefore to longer observation times. In this paper we compare three methodologies of data analysis for robustness in the presence of outliers, data shifts and shorter measurement time periods.

  6. Integral data analysis for resonance parameters determination

    SciTech Connect (OSTI)

    Larson, N.M.; Leal, L.C.; Derrien, H.

    1997-09-01

    Neutron time-of-flight experiments have long been used to determine resonance parameters. Those resonance parameters have then been used in calculations of integral quantities such as Maxwellian averages or resonance integrals, and results of those calculations in turn have been used as a criterion for acceptability of the resonance analysis. However, the calculations were inadequate because covariances on the parameter values were not included in the calculations. In this report an effort to correct for that deficiency is documented: (1) the R-matrix analysis code SAMMY has been modified to include integral quantities of importance, (2) directly within the resonance parameter analysis, and (3) to determine the best fit to both differential (microscopic) and integral (macroscopic) data simultaneously. This modification was implemented because it is expected to have an impact on the intermediate-energy range that is important for criticality safety applications.

  7. Crack length determination by ultrasonic methods

    SciTech Connect (OSTI)

    Rehbein, D.K.; Thompson, R.B.; Buck, O.

    1992-01-01

    Under the restriction of being able to operate in through transmission with focussed transducers, it has been shown that the location of the tip of a fatigue crack can be determined to within 0.5 mm in those cases where curvature of the crack front is significant with correspondingly better accuracy as the curvature decreases. Location of the crack tip is accomplished through use of the distributed spring model and also yields information on the residual stresses due to closure. The technique used is able to determine the crack length to within [plus minus] 0.5 mm in the unloaded condition in contrast to most of the work done previously, removing the necessity for application of a load sufficient to fully open the crack.

  8. Crack length determination by ultrasonic methods

    SciTech Connect (OSTI)

    Rehbein, D.K.; Thompson, R.B.; Buck, O.

    1992-12-31

    Under the restriction of being able to operate in through transmission with focussed transducers, it has been shown that the location of the tip of a fatigue crack can be determined to within 0.5 mm in those cases where curvature of the crack front is significant with correspondingly better accuracy as the curvature decreases. Location of the crack tip is accomplished through use of the distributed spring model and also yields information on the residual stresses due to closure. The technique used is able to determine the crack length to within {plus_minus} 0.5 mm in the unloaded condition in contrast to most of the work done previously, removing the necessity for application of a load sufficient to fully open the crack.

  9. Sphericity determination using resonant ultrasound spectroscopy

    DOE Patents [OSTI]

    Dixon, Raymond D.; Migliori, Albert; Visscher, William M.

    1994-01-01

    A method is provided for grading production quantities of spherical objects, such as roller balls for bearings. A resonant ultrasound spectrum (RUS) is generated for each spherical object and a set of degenerate sphere-resonance frequencies is identified. From the degenerate sphere-resonance frequencies and known relationships between degenerate sphere-resonance frequencies and Poisson's ratio, a Poisson's ratio can be determined, along with a "best" spherical diameter, to form spherical parameters for the sphere. From the RUS, fine-structure resonant frequency spectra are identified for each degenerate sphere-resonance frequency previously selected. From each fine-structure spectrum and associated sphere parameter values an asphericity value is determined. The asphericity value can then be compared with predetermined values to provide a measure for accepting or rejecting the sphere.

  10. Sphericity determination using resonant ultrasound spectroscopy

    DOE Patents [OSTI]

    Dixon, R.D.; Migliori, A.; Visscher, W.M.

    1994-10-18

    A method is provided for grading production quantities of spherical objects, such as roller balls for bearings. A resonant ultrasound spectrum (RUS) is generated for each spherical object and a set of degenerate sphere-resonance frequencies is identified. From the degenerate sphere-resonance frequencies and known relationships between degenerate sphere-resonance frequencies and Poisson's ratio, a Poisson's ratio can be determined, along with a 'best' spherical diameter, to form spherical parameters for the sphere. From the RUS, fine-structure resonant frequency spectra are identified for each degenerate sphere-resonance frequency previously selected. From each fine-structure spectrum and associated sphere parameter values an asphericity value is determined. The asphericity value can then be compared with predetermined values to provide a measure for accepting or rejecting the sphere. 14 figs.

  11. Determining Outdoor CPV Cell Temperature: Preprint

    SciTech Connect (OSTI)

    Muller, M.; Deline, C.; Marion, B.; Kurtz, S.; Bosco, N.

    2011-07-01

    An accurate method is needed for determining cell temperature when measuring CPV modules outdoors. It has been suggested that cell temperature can be calculated though a procedure that shutters sunlight to the cells while measuring the transients in open-circuit voltage (Voc) and heat sink temperature. This paper documents application of this shutter procedure to multiple CPV modules at NREL. The challenges and limitations are presented along with an alternate approach to measuring CPV cell operating temperature.

  12. DNA polymorphism identity determination using flow cytometry

    DOE Patents [OSTI]

    Nolan, John P.; White, P. Scott; Cai, Hong

    2001-01-01

    DNA polymorphism identity determination using flow cytometry. Primers designed to be immobilized on microspheres are allowed to anneal to the DNA strand under investigation, and are extended by either DNA polymerase using fluorescent dideoxynucleotides or ligated by DNA ligase to fluorescent reporter oligonucleotides. The fluorescence of either the dideoxynucleotide or the reporter oligonucleotide attached to the immobilized primer is measured by flow cytometry, thereby identifying the nucleotide polymorphism on the DNA strand.

  13. Template for Discontinuation of Access Eligibility Determination

    Energy Savers [EERE]

    MEMORANDUM FOR (SUBJECT'S NAME) FROM: Personnel Security Program Manager SUBJECT: Discontinuation of Access Eligibility Determination Reference is made to your Questionnaire for National Security Positions (QNSP) signed [insert date], which was forwarded to this office in connection with a Department of Energy security clearance request. Your case was submitted to the Office of Personnel Management (OPM) and an investigation dated [insert date] has been received. [Insert a brief description of

  14. Determining Camera Gain in Room Temperature Cameras

    SciTech Connect (OSTI)

    Joshua Cogliati

    2010-12-01

    James R. Janesick provides a method for determining the amplification of a CCD or CMOS camera when only access to the raw images is provided. However, the equation that is provided ignores the contribution of dark current. For CCD or CMOS cameras that are cooled well below room temperature, this is not a problem, however, the technique needs adjustment for use with room temperature cameras. This article describes the adjustment made to the equation, and a test of this method.

  15. Categorical Exclusion Determinations | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Counsel / National Environmental Policy Act (NEPA) / NEPA Reading Room Categorical Exclusion Determinations 5/12/2016, Demolish all structures, pavement, concrete, and utilities associated with Department of Energy operations at the NC-135 Site on Kirtland Air Force Base, Albuquerque, New Mexico 4/28/2016, Financial assistance to several University and Institutions for the Stewardship Science Academic Alliance (SSAA) 4/20/2016, Financial and technical assistance to the South

  16. Determining risks for hazardous material operations

    SciTech Connect (OSTI)

    Cournoyer, M. E.; Dare, J. H.

    2002-01-01

    Integrated Safety Management (ISM) is structured to manage and control work at the activity level. Fundamental to ISM is that all work will be performed safely while meeting the applicable institutional-, facility-, and activity-level expectations. High and medium initial risk activities require certain levels of independent peer and/or Environmental, Health & Safety subject matter expert reviews prior to authorization. A key responsibility of line management and chemical workers is to assign initial risk adequately, so that the proper reviews are obtained. Thus, the effectiveness of an ISM system is largely dependent upon the adequacy and accuracy of this initial risk determination. In the following presentation, a Risk Determination Model (RDM) is presented for physical, health and ecological hazards associated with materials. Magnitude of exposure (Le., dose or concentration), frequency, duration, and quantity are the four factors most difficult to capture in a research and development setting. They are factored into the determination, as a function of the quantity of material. Quantity and magnitude of exposure components are simplified by using boundary criteria. This RDM will promote conformity and consistency in the assignment of risk to hazardous material activities. In conclusion, the risk assessors (line manager and chemical worker) should be capable of more accurately assessing the risk of exposure to a specific chemical with regard to the employee, public, and the environment.

  17. Enrichment Determination of Uranium in Shielded Configurations

    SciTech Connect (OSTI)

    Crye, Jason Michael; Hall, Howard L; McConchie, Seth M; Mihalczo, John T; Pena, Kirsten E

    2011-01-01

    The determination of the enrichment of uranium is required in many safeguards and security applications. Typical methods of determining the enrichment rely on detecting the 186 keV gamma ray emitted by {sup 235}U. In some applications, the uranium is surrounded by external shields, and removal of the shields is undesirable. In these situations, methods relying on the detection of the 186 keV gamma fail because the gamma ray is shielded easily. Oak Ridge National Laboratory (ORNL) has previously measured the enrichment of shielded uranium metal using active neutron interrogation. The method consists of measuring the time distribution of fast neutrons from induced fissions with large plastic scintillator detectors. To determine the enrichment, the measurements are compared to a calibration surface that is created from Monte Carlo simulations where the enrichment in the models is varied. In previous measurements, the geometry was always known. ORNL is extending this method to situations where the geometry and materials present are not known in advance. In the new method, the interrogating neutrons are both time and directionally tagged, and an array of small plastic scintillators measures the uncollided interrogating neutrons. Therefore, the attenuation through the item along many different paths is known. By applying image reconstruction techniques, an image of the item is created which shows the position-dependent attenuation. The image permits estimating the geometry and materials present, and these estimates are used as input for the Monte Carlo simulations. As before, simulations predict the time distribution of induced fission neutrons for different enrichments. Matching the measured time distribution to the closest prediction from the simulations provides an estimate of the enrichment. This presentation discusses the method and provides results from recent simulations that show the importance of knowing the geometry and materials from the imaging system.

  18. Fluid properties determine flow line blockage potential

    SciTech Connect (OSTI)

    Hunt, A.

    1996-07-15

    A thorough understanding of fluid properties helps in determining the potential of hydrates, paraffins, or asphaltenes to block subsea flow lines. Thermal, chemical, and mechanical methods are the main ways for preventing deposition. Already in both the North Sea and the Gulf of Mexico, blockages have led to significant losses in production and reserves recovery. This first article in a two-part series discusses thermal and chemical methods in overcoming fluid behavior problems caused by hydrate and other fluid constituents in subsea multiphase flow. The paper discusses subsea production, possible problems, nucleation, growth, deposition, preventing deposition, hydrate predictions, multiphase flow, and hydrate inhibition.

  19. Method and apparatus for determining tensile strength

    DOE Patents [OSTI]

    Ratigan, J.L.

    1982-05-28

    A method and apparatus is described for determining the statistical distribution of apparent tensile strength of rock, the size effect with respect to tensile strength, as well as apparent deformation modulus of both intact and fractured or jointed rock. The method is carried out by inserting a plug of deformable material, such as rubber, in an opening of a specimen to be tested. The deformable material is loaded by an upper and lower platen until the specimen ruptures, whereafter the tensile strength is calculated based on the parameters of the test specimen and apparatus.

  20. Method and apparatus for determining tensile strength

    DOE Patents [OSTI]

    Ratigan, Joe L.

    1984-01-01

    A method and apparatus for determining the statistical distribution of apparent tensile strength of rock, the size effect with respect to tensile strength, as well as apparent deformation modulus of both intact and fractured or jointed rock. The method is carried out by inserting a plug of deformable material, such as rubber, in an opening of a specimen to be tested. The deformable material is loaded by an upper and lower platen until the specimen ruptures, whereafter the tensile strength is calculated based on the parameters of the test specimen and apparatus.

  1. Determination of Bulk Dimensional Variation in Castings

    SciTech Connect (OSTI)

    Dr. James F. Cuttino Dr. Edward P. Morse

    2005-04-14

    The purpose of this work is to improve the efficiency of green sand foundries so that they may continue to compete as the most cost-effective method of fabrication while meeting tightening constraints on near-net shape manufacturing. In order to achieve this objective, the study is divided into two major components. The first component concentrated on identifying which processes control surface finish on the castings and which provide potential reductions in variations. The second component identified metrological methods that effectively discern between the geometry of bulk material versus surface finish in order to more accurately determine the quality of a part. The research resulted in the determination of an empirical relationship relating pouring parameters to dimensional variation, with an R2 value of greater than 0.79. A significant difference in variations obtained from vertical vs. horizontal molding machines was also noticed. When analyzed separately, however, the resulting empirical relationships for horizontal and vertical machines had reduced R2 values, probably due to the reduced data sets. Significant parameters when considering vertical and horizontal molding machines together included surface roughness, pattern type, iron type, pouring rate, copper content, amount of Western Bentonite, and permeability.

  2. Determining the Overpotential for a Molecular Electrocatalyst

    SciTech Connect (OSTI)

    Appel, Aaron M.; Helm, Monte L.

    2014-02-07

    “The additional potential (beyond the thermodynamic requirement) needed to drive a reaction at a certain rate is called the overpotential.”1 Over the last decade there has been considerable interest in the design and testing of molecular electrocatalysis for the interconversion of renewable energy and chemical fuels.2-5 One of the primary motivations for such research is the replacement of expensive and rare precious metal catalysts, such as platinum, with cheaper, more abundant metals.2,6-8 To become competitive with current electrocatalytic energy conversion technologies, new catalysts must be robust, fast, and energy-efficient. This last feature, the energy-efficiency, is dependent upon the overpotential. For molecular catalysts, the determination and reporting of overpotentials can be complicated by the frequent dependence on assumptions, especially when working in nonaqueous solvents. As overpotentials become lower, the meaningful comparison of molecular catalysts will require improved accuracy and precision. The intended purpose of this viewpoint is to provide a clear and concise description of overpotential and recommendation for its determination in molecular electrocatalysis. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences.

  3. Determining window solar heat gain coefficient

    SciTech Connect (OSTI)

    Harrison, S.J.; Wonderen, S.J. van . Solar Calorimetry Lab.)

    1994-08-01

    The solar heat gain characteristics of fenestration systems impact daytime building energy performance, occupant comfort and utility load demands. A measure of the fraction of available solar energy entering a building interior per unit window area is defined as the solar heat gain coefficient (SHGC). Together with a window's thermal transmittance (U-value), the SHGC is used to compare fenestration products, and it allows for the calculation of energy rating number and annual energy performance. The need to measure and compared advances in window technology has led to the development of experimental and analytical methods for the determination of SHGC performance. Several test facilities currently or previously capable of performing SHGC measurements exist worldwide. Results experimentally determined using these facilities have provided design data for handbook tables, and have been instrumental in the development and validation of predictive analytical methods and computer simulation tools. However, these facilities have operated without a standard test procedure for SHGC performance. Consequently, recent efforts have been focused on developing consensus test procedures for the evaluation of window energy performance.

  4. A Method to Determine Lysine Acetylation Stoichiometries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nakayasu, Ernesto S.; Wu, Si; Sydor, Michael A.; Shukla, Anil K.; Weitz, Karl K.; Moore, Ronald J.; Hixson, Kim K.; Kim, Jong-Seo; Petyuk, Vladislav A.; Monroe, Matthew E.; et al

    2014-01-01

    Lysine acetylation is a common protein posttranslational modification that regulates a variety of biological processes. A major bottleneck to fully understanding the functional aspects of lysine acetylation is the difficulty in measuring the proportion of lysine residues that are acetylated. Here we describe a mass spectrometry method using a combination of isotope labeling and detection of a diagnostic fragment ion to determine the stoichiometry of protein lysine acetylation. Using this technique, we determined the modification occupancy for ~750 acetylated peptides from mammalian cell lysates. Furthermore, the acetylation on N-terminal tail of histone H4 was cross-validated by treating cells with sodiummore » butyrate, a potent deacetylase inhibitor, and comparing changes in stoichiometry levels measured by our method with immunoblotting measurements. Of note we observe that acetylation stoichiometry is high in nuclear proteins, but very low in mitochondrial and cytosolic proteins. In summary, our method opens new opportunities to study in detail the relationship of lysine acetylation levels of proteins with their biological functions.« less

  5. Rapid determination of actinides in seawater samples

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B.; Utsey, Robin C.; McAlister, Daniel R.

    2014-03-09

    A new rapid method for the determination of actinides in seawater samples has been developed at the Savannah River National Laboratory. The actinides can be measured by alpha spectrometry or inductively-coupled plasma mass spectrometry. The new method employs novel pre-concentration steps to collect the actinide isotopes quickly from 80 L or more of seawater. Actinides are co-precipitated using an iron hydroxide co-precipitation step enhanced with Ti+3 reductant, followed by lanthanum fluoride co-precipitation. Stacked TEVA Resin and TRU Resin cartridges are used to rapidly separate Pu, U, and Np isotopes from seawater samples. TEVA Resin and DGA Resin were used tomore » separate and measure Pu, Am and Cm isotopes in seawater volumes up to 80 L. This robust method is ideal for emergency seawater samples following a radiological incident. It can also be used, however, for the routine analysis of seawater samples for oceanographic studies to enhance efficiency and productivity. In contrast, many current methods to determine actinides in seawater can take 1–2 weeks and provide chemical yields of ~30–60 %. This new sample preparation method can be performed in 4–8 h with tracer yields of ~85–95 %. By employing a rapid, robust sample preparation method with high chemical yields, less seawater is needed to achieve lower or comparable detection limits for actinide isotopes with less time and effort.« less

  6. Rapid determination of actinides in asphalt samples

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B.

    2014-01-12

    A new rapid method for the determination of actinides in asphalt samples has been developed that can be used in emergency response situations or for routine analysis If a radiological dispersive device (RDD), Improvised Nuclear Device (IND) or a nuclear accident such as the accident at the Fukushima Nuclear Power Plant in March, 2011 occurs, there will be an urgent need for rapid analyses of many different environmental matrices, including asphalt materials, to support dose mitigation and environmental clean up. The new method for the determination of actinides in asphalt utilizes a rapid furnace step to destroy bitumen and organicsmore » present in the asphalt and sodium hydroxide fusion to digest the remaining sample. Sample preconcentration steps are used to collect the actinides and a new stacked TRU Resin + DGA Resin column method is employed to separate the actinide isotopes in the asphalt samples. The TRU Resin plus DGA Resin separation approach, which allows sequential separation of plutonium, uranium, americium and curium isotopes in asphalt samples, can be applied to soil samples as well.« less

  7. Rapid determination of actinides in asphalt samples

    SciTech Connect (OSTI)

    Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B.

    2014-01-12

    A new rapid method for the determination of actinides in asphalt samples has been developed that can be used in emergency response situations or for routine analysis If a radiological dispersive device (RDD), Improvised Nuclear Device (IND) or a nuclear accident such as the accident at the Fukushima Nuclear Power Plant in March, 2011 occurs, there will be an urgent need for rapid analyses of many different environmental matrices, including asphalt materials, to support dose mitigation and environmental clean up. The new method for the determination of actinides in asphalt utilizes a rapid furnace step to destroy bitumen and organics present in the asphalt and sodium hydroxide fusion to digest the remaining sample. Sample preconcentration steps are used to collect the actinides and a new stacked TRU Resin + DGA Resin column method is employed to separate the actinide isotopes in the asphalt samples. The TRU Resin plus DGA Resin separation approach, which allows sequential separation of plutonium, uranium, americium and curium isotopes in asphalt samples, can be applied to soil samples as well.

  8. Determination of leakage areas in nuclear piping

    SciTech Connect (OSTI)

    Keim, E.

    1997-04-01

    For the design and operation of nuclear power plants the Leak-Before-Break (LBB) behavior of a piping component has to be shown. This means that the length of a crack resulting in a leak is smaller than the critical crack length and that the leak is safely detectable by a suitable monitoring system. The LBB-concept of Siemens/KWU is based on computer codes for the evaluation of critical crack lengths, crack openings, leakage areas and leakage rates, developed by Siemens/KWU. In the experience with the leak rate program is described while this paper deals with the computation of crack openings and leakage areas of longitudinal and circumferential cracks by means of fracture mechanics. The leakage areas are determined by the integration of the crack openings along the crack front, considering plasticity and geometrical effects. They are evaluated with respect to minimum values for the design of leak detection systems, and maximum values for controlling jet and reaction forces. By means of fracture mechanics LBB for subcritical cracks has to be shown and the calculation of leakage areas is the basis for quantitatively determining the discharge rate of leaking subcritical through-wall cracks. The analytical approach and its validation will be presented for two examples of complex structures. The first one is a pipe branch containing a circumferential crack and the second one is a pipe bend with a longitudinal crack.

  9. MASS DETERMINATION STUDIES OF 104 LARGE ASTEROIDS

    SciTech Connect (OSTI)

    Zielenbach, William

    2011-10-15

    The techniques described in an earlier paper were used to determine masses of 104 asteroids by the method of asteroid-asteroid gravitational interaction. For each of the 104 perturbers, 4 large sets of test particles selected by different criteria were used to calculate 4 mass values from a weighted mean of individual results within each set. The sheer number of test particles and observations ameliorates the effects of random observational errors and the type of systematic errors known to have affected specific observatories at specific times. It also reduces the effect of mismodeled attractions by perturbers other than the one being estimated, because the various test particles are affected to different degrees and in different directions. For most of the perturbers that have been analyzed by others, the results of this study agree reasonably well with values published in the past decade, giving credence to the approach. Thirty-eight of the results appear to be the first published masses for the respective asteroids, and 12 are the first determinations based on asteroid-asteroid interactions. Unrealistic and/or negative masses were obtained for some perturbers. Causes for this phenomenon are discussed and various means to obtain reasonable numbers are evaluated.

  10. Record of Categorical Exclusiom (CX) Determination, Office of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusiom (CX) Determination, Office of Electricity Delivery and Energy Reliability (OE): EA-406 Sempra Generation, LLC Record of Categorical Exclusiom (CX) Determination, Office ...

  11. Categorical Exclusion Determinations: A8 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 18, 2015 CX-013480: Categorical Exclusion Determination Lightning Mapping Array ... December 27, 2013 CX-011714: Categorical Exclusion Determination Lightning Mapping Array ...

  12. Precision Determination Of The Nonlinear Matter Power Spectrum...

    Office of Scientific and Technical Information (OSTI)

    Precision Determination Of The Nonlinear Matter Power Spectrum Citation Details In-Document Search Title: Precision Determination Of The Nonlinear Matter Power Spectrum You are...

  13. Categorical Exclusion Determinations: B3.11 | Department of Energy

    Energy Savers [EERE]

    ... April 16, 2015 CX-013666: Categorical Exclusion Determination Ground-Based Laser Field ... December 1, 2014 CX-100123 Categorical Exclusion Determination High Power Laser Tool and ...

  14. DOE's General Counsel Determines Sudan Act Does Not Bar Areva...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE's General Counsel Determines Sudan Act Does Not Bar Areva Enrichment Services LLC Loan Application DOE's General Counsel Determines Sudan Act Does Not Bar Areva Enrichment ...

  15. Categorical Exclusion Determinations: B5.20 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 25, 2016 CX-100497 Categorical Exclusion Determination Placer County Biomass ... January 22, 2016 CX-100454 Categorical Exclusion Determination State Energy Program - ...

  16. DETERMINATION OF EXCEPTIONAL CIRCUMSTANCES UNDER THE BAYH-DOLE...

    Office of Environmental Management (EM)

    DETERMINATION OF EXCEPTIONAL CIRCUMSTANCES UNDER THE BAYH-DOLE ACT FOR ENERGY EFFICIENCY, RENEWABLE ENERGY, AND ADVANCED ENERGY TECHNOLOGIES DETERMINATION OF EXCEPTIONAL...

  17. REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 2005-2515 Daniel W. Simms Division of | Revision No.: 18 Director Wage Determinations| Date Of...

  18. EIS-0225-SA-05: Supplement Analysis Determination | Department...

    Office of Environmental Management (EM)

    5-SA-05: Supplement Analysis Determination EIS-0225-SA-05: Supplement Analysis Determination Continued Operation of the Pantex Plant and Associated Storage of Nuclear Weapon ...

  19. POLICY FLASH 2014-15 Determination of Benchmark Compensation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Determination of Benchmark Compensation Amount for Certain Executives and Employees POLICY FLASH 2014-15 Determination of Benchmark Compensation Amount for Certain Executives and...

  20. POLICY FLASH 2014-15 Determination of Benchmark Compensation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Determination of Benchmark Compensation Amount for Certain Executives and Employees (Update) POLICY FLASH 2014-15 Determination of Benchmark Compensation Amount for Certain...