National Library of Energy BETA

Sample records for designated proprietary user

  1. Proprietary User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alliance/NREL 10-12-15 The Department of Energy has opted to utilize the following agreement for Designated Proprietary User Facilities transactions. Because these transactions are widespread across Departmental facilities, uniformity in agreement terms is desirable. Except for the *** provisions, minor modifications to the terms of this agreement may be made by CONTRACTOR, but any changes to the *** provisions or substantive changes to the non *** provisions will require approval by the DOE

  2. Non-Proprietary User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Non-Proliferation Treaty

    Alliance/NREL 1-21-16 The Department of Energy has opted to utilize the following agreement for Designated Non-Proprietary User Facilities transactions. Because these transactions are widespread across Departmental facilities, uniformity in agreement terms is desirable. Except for the *** provisions, minor modifications to the terms of this agreement may be made by CONTRACTOR, but any changes to the *** provisions or substantive changes to the non *** provisons will

  3. The Department of Energy has opted to utilize the following agreement for Designated Non-Proprietary User Facilities transactions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    agreement for Designated Proprietary User Facilities transactions. Because these transactions are widespread across Departmental facilities, uniformity in agreement terms is desirable. Except for the *** provisions, minor modifications to the terms of this agreement may be made by CONTRACTOR, but any changes to the *** provisions or substantive changes to the non *** provisons will require approval by the DOE Contracting Officer, WHICH WILL LIKEY DELAY YOUR ACCESS TO THE USER FACILITY. In

  4. Microsoft Word - Non-Proprietary User Agreement _2-25-09_ final.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy has opted to utilize the following agreement for Designated Non-Proprietary User Facilities transactions. Because these transactions are widespread across Departmental facilities, uniformity in agreement terms is desirable. Except for the *** provisions, minor modifications to the terms of this agreement may be made by CONTRACTOR, but any changes to the *** provisions or substantive changes to the non *** provisons will require approval by the DOE Contracting Officer, WHICH

  5. DOE Designated User Facilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Designated User Facilities DOE Designated User Facilities DOE Designated User Facilities Sept 30 2015 More Documents & Publications Microsoft Word - DesignatedUserFacilitiesApri...

  6. Sandia Proprietary Information PII

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BRU (09-2014) Sandia Proprietary Information PII 1 Sandia Proprietary Information NEW MEXICO BACKGROUND REVIEW UPDATE You are receiving this notice on behalf of the Personnel Security Background Review Office. If you have any questions regarding the Background Review process, or the attached form. Contact the Personnel Security Background Review Office at 1-800-417-2634, ext. 844-8902 or (505) 844-8902. In compliance with 48 CFR 904.401 prior to selecting any individual for any position

  7. Proprietary Research at the Center for Nanoscale Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proprietary R esearch a t t he C enter f or N anoscale M aterials ( CNM) This handout provides details on the mechanism for carrying out proprietary user research at the CNM at Argonne National Laboratory (ANL). * Access to the CNM User Facility is granted via a peer-reviewed proposal system. * Users provide sufficient information to ensure that each planned experiment can be performed safely. Argonne personnel provide appropriate safety training and oversight. * Users are charged for

  8. Sandia Proprietary Information PII

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CBR (09/2014) Supersedes (07-2013) Issue Sandia Proprietary Information PII 1 Sandia Proprietary Information CALIFORNIA CONSULTANT PRE-PROCESSING BACKGROUND REVIEW You are receiving this notice on behalf of the Personnel Security Background Review Office. If you have any questions regarding the Background Review process, or the attached form. Contact the Personnel Security Background Review Office at 1-800-417-2634, ext. 844-8902 or (505) 844-8902 or email: pebr@sandia.gov. In compliance with 48

  9. Sandia Proprietary Information PII

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PRO (09-2014) Supersedes (09-2013) Issue Sandia Proprietary Information PII 1 Sandia Proprietary Information NM CONSULTANT PRE-PROCESSING BACKGROUND REVIEW You are receiving this notice on behalf of the Personnel Security Background Review Office. If you have any questions regarding the Background Review process, or the attached form. Contact the Personnel Security Background Review Office at 1-800-417-2634, ext. 844-8902 or (505) 844-8902. In compliance with 48 CFR 904.401 prior to selecting

  10. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users...

  11. The Department of Energy has opted to utilize the following agreement for Designated Non-Proprietary User Facilities transactions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Celebrates LGBTQ Pride The Department of Energy Celebrates LGBTQ Pride June 17, 2015 - 5:54pm Addthis Watch the video of the entire LGBTQ program held June 15, 2015 at the Department of Energy. | Video courtesy of the Energy Department. Tre Easton Tre Easton Special Assistant to the Assistant Secretary, Office of Congressional and Intergovernmental Affairs Tre Easton, Special Assistant to the Assistant Secretary in the Office of Congressional and Intergovernmental Affairs, gave opening remarks

  12. Microsoft Word - Template_SLAC Proprietary Use Agreement_PU 11_14_13

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PU 11/14/2013 1 The Department of Energy has opted to utilize the following agreement for Designated Proprietary User Facilities transactions. Because these transactions are widespread across Departmental facilities, uniformity in agreement terms is desirable. Except for the *** provisions, minor modifications to the terms of this agreement may be made by CONTRACTOR, but any changes to the *** provisions or substantive changes to the non *** provisons will require approval by the DOE Contracting

  13. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users The facility has been used for more than a decade by a virtual Who's Who of the semiconductor industry to simulate the potential failures posed by cosmic-ray-induced neutrons upon miniature electronic devices, such as chips that help control aircraft or complex integrated circuits in automobiles. Industrial User Information The Neutron and Nuclear Science (WNR) Facility welcomes proposals for beam time experiments from industry users. Proprietary and non-proprietary industrial

  14. Designing a user-system interface

    SciTech Connect (OSTI)

    Pfuderer, H.A.; Miller, K.C.

    1989-01-01

    Our team at the Oak Ridge National Laboratory (ORNL) has been successful in guiding managers of government organizations in planning and implementing successful strategic information systems. The essence of the ORNL methodology is to provide users at all levels in the organization many opportunities to participate in systems development. This user involvement included: incorporating their own critical success factors into the planning process; defining the business objectives, processes, and needed systems implementation in a team approach; and providing down-to-earth, usability feedback in prototyping the most strategic systems. 2 figs.

  15. Applying User Centered Design to Research Work

    SciTech Connect (OSTI)

    Scholtz, Jean; Love, Oriana J.; Pike, William A.; Bruce, Joseph R.; Kim, Dee DH; McBain, Arthur S.

    2014-07-01

    The SuperIdentity (SID) research project is a collaboration between six universities in the UK (Bath, Dundee, Kent, Leicester, Oxford, and Southampton) and the Pacific Northwest National Laboratory (PNNL). SID offers an innovative and exciting new approach to the concept of identity. The assumption underlying our hypothesis is that while there may be many dimensions to an identity - some more stable than others - all should ultimately reference back to a single core identity or a 'SuperIdentity.' The obvious consequence is that identification is improved by the combination of measures. Our work at PNNL has focused on the developing use cases to use in developing a model of identity and in developing visualizations for both researchers to explore the model and in the future for end users to use in determining various paths that may be possible to obtain various identity attributes from a set that is already known.

  16. About the User Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . All proposals are reviewed for scientific merit by the Program Advisory Committee (PAC). In the case of proprietary proposals, such as the case for Industry, users pay for...

  17. Designing user models in a virtual cave environment

    SciTech Connect (OSTI)

    Brown-VanHoozer, S.; Hudson, R.; Gokhale, N.

    1995-12-31

    In this paper, the results of a first study into the use of virtual reality for human factor studies and design of simple and complex models of control systems, components, and processes are described. The objective was to design a model in a virtual environment that would reflect more characteristics of the user`s mental model of a system and fewer of the designer`s. The technology of a CAVE{trademark} virtual environment and the methodology of Neuro Linguistic Programming were employed in this study.

  18. GCtool for fuel cell systems design and analysis : user documentation.

    SciTech Connect (OSTI)

    Ahluwalia, R.K.; Geyer, H.K.

    1999-01-15

    GCtool is a comprehensive system design and analysis tool for fuel cell and other power systems. A user can analyze any configuration of component modules and flows under steady-state or dynamic conditions. Component models can be arbitrarily complex in modeling sophistication and new models can be added easily by the user. GCtool also treats arbitrary system constraints over part or all of the system, including the specification of nonlinear objective functions to be minimized subject to nonlinear, equality or inequality constraints. This document describes the essential features of the interpreted language and the window-based GCtool environment. The system components incorporated into GCtool include a gas flow mixer, splitier, heater, compressor, gas turbine, heat exchanger, pump, pipe, diffuser, nozzle, steam drum, feed water heater, combustor, chemical reactor, condenser, fuel cells (proton exchange membrane, solid oxide, phosphoric acid, and molten carbonate), shaft, generator, motor, and methanol steam reformer. Several examples of system analysis at various levels of complexity are presented. Also given are instructions for generating two- and three-dimensional plots of data and the details of interfacing new models to GCtool.

  19. Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... offered at CAMD's annual user meeting) or by retaking the online CAMD Radiation Safety Test. If your training has expired your access card will not allow access to the ...

  20. NGDS User Centered Design Meeting the Needs of the Geothermal Community

    SciTech Connect (OSTI)

    Boyd, Suzanne; Zheng, Sam; Patten, Kim; Blackman, Harold

    2013-10-01

    In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineer- ing the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been research based, highly collabora- tive, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

  1. NGDS USER CENTERED DESIGN MEETING THE NEEDS OF THE GEOTHERMAL COMMUNITY

    SciTech Connect (OSTI)

    Boyd, Suzanne; Zheng, Sam Xianjun; Patten, Kim; Blackman, Harold

    2013-12-23

    In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineering the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been researched based, highly collaborative, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

  2. MHTool User's Guide - Software for Manufactured Housing Structural Design

    SciTech Connect (OSTI)

    W. D. Richins

    2005-07-01

    Since the late 1990s, the Department of Energy's Idaho National Laboratory (INL) has worked with the US Department of Housing and Urban Development (HUD), the Manufactured Housing Institute (MHI), the National Institute of Standards and Technology (NIST), the National Science Foundation (NSF), and an industry committee to measure the response of manufactured housing to both artificial and natural wind loads and to develop a computational desktop tool to optimize the structural performance of manufactured housing to HUD Code loads. MHTool is the result of an 8-year intensive testing and verification effort using single and double section homes. MHTool is the first fully integrated structural analysis software package specifically designed for manufactured housing. To use MHTool, industry design engineers will enter information (geometries, materials, connection types, etc.) describing the structure of a manufactured home, creating a base model. Windows, doors, and interior walls can be added to the initial design. Engineers will input the loads required by the HUD Code (wind, snow loads, interior live loads, etc.) and run an embedded finite element solver to find walls or connections where stresses are either excessive or very low. The designer could, for example, substitute a less expensive and easier to install connection in areas with very low stress, then re-run the analysis for verification. If forces and stresses are still within HUD Code requirements, construction costs would be saved without sacrificing quality. Manufacturers can easily change geometries or component properties to optimize designs of various floor plans then submit MHTool input and output in place of calculations for DAPIA review. No change in the regulatory process is anticipated. MHTool, while not yet complete, is now ready for demonstration. The pre-BETA version (Build-16) was displayed at the 2005 National Congress & Expo for Manufactured & Modular Housing. Additional base models and an

  3. Spark Solar Australia Proprietary Limited | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Spark Solar Australia Proprietary Limited Place: O Connor, Australian Capital Territory, Australia Zip: 2602 Product: Australia-based...

  4. User-Centered Design Guidelines for Collaborative Software for Intelligence Analysis

    SciTech Connect (OSTI)

    Scholtz, Jean; Endert, Alexander N.

    2014-08-01

    In this position paper we discuss the necessity of using User-Centered Design (UCD) methods in order to design collaborative software for the intelligence community. We present some standing issues in collaborative software based on existing work within the intelligence community. Based on this information we present opportunities to address some of these challenges.

  5. User-Centered Design Guidelines for Collaborative Software for Intelligence Analysis

    SciTech Connect (OSTI)

    Scholtz, Jean; Endert, Alexander

    2014-07-01

    In this position paper we discuss the necessity of using User-Centered Design (UCD) methods in order to design collaborative software for the intelligence community. We discuss a number of studies of collaboration in the intelligence community and use this information to provide some guidelines for collaboration software.

  6. Improving the quality of numerical software through user-centered design

    SciTech Connect (OSTI)

    Pancake, C. M., Oregon State University

    1998-06-01

    The software interface - whether graphical, command-oriented, menu-driven, or in the form of subroutine calls - shapes the user`s perception of what software can do. It also establishes upper bounds on software usability. Numerical software interfaces typically are based on the designer`s understanding of how the software should be used. That is a poor foundation for usability, since the features that are ``instinctively right`` from the developer`s perspective are often the very ones that technical programmers find most objectionable or most difficult to learn. This paper discusses how numerical software interfaces can be improved by involving users more actively in design, a process known as user-centered design (UCD). While UCD requires extra organization and effort, it results in much higher levels of usability and can actually reduce software costs. This is true not just for graphical user interfaces, but for all software interfaces. Examples show how UCD improved the usability of a subroutine library, a command language, and an invocation interface.

  7. Department of Energy Designates the Idaho National Laboratory Advanced Test Reactor as a National Scientific User Facility

    Broader source: Energy.gov [DOE]

    WASHINGTON, DC - The U.S. Department of Energy (DOE) today designated the Idaho National Laboratory's (INL) Advanced Test Reactor (ATR) as a National Scientific User Facility.  Establishing the ATR...

  8. Portable RSA encryption-decryption subprogram for protecting proprietary text

    SciTech Connect (OSTI)

    Hanson, R.J.

    1981-09-01

    A virtually portable (FORTRAN) version of the RSA (Rivest, Shamir, Adleman) algorithm for encryption and decryption of proprietary text has been written. This system uses three previously developed software packages. These are an extended precision integer arithmetic package, an error processing package, and machine-sensitive input/output subprograms from the Text Exchange System.

  9. AIRMaster+ User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Manual AIRMaster+ User Manual This user manual is designed to help users understand the AIRMaster+ compressed air software. AIRMaster+ User Manual (2000) (2.39

  10. Designing Biological Systems for Sustainability and Programmed Environmental Interface (2011 JGI User Meeting)

    ScienceCinema (OSTI)

    Silver, Pam [Harvard University

    2011-06-03

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Pam Silver of Harvard University gives a presentation on "Designing Biological Systems for Sustainability and Programmed Environmental Interface" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

  11. Designing Biological Systems for Sustainability and Programmed Environmental Interface (2011 JGI User Meeting)

    SciTech Connect (OSTI)

    Silver, Pam [Harvard University] [Harvard University

    2011-03-23

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Pam Silver of Harvard University gives a presentation on "Designing Biological Systems for Sustainability and Programmed Environmental Interface" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

  12. LANSCE | Users | User Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Office LANSCE User Office and Visitor Center The LANSCE User Office is responsible for coordinating the users with LANSCE instrument scientist and the facility. Users contact the User Office weeks before they arrive at the LANSCE Visitor Center at Technical Area 53. Among their many responsibilities, the team issues the call for proposals, coordinates proposal experiment schedules, directs users to the training center, issues badges and dosimeters, helps to arrange tours of the facilities,

  13. JLab Users Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JLab Users Group Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? JLab Users Group User Liaison Home Users Group Program Advisory Committee User/Researcher Information print version UG Resources Background & Purpose Users Group Wiki By Laws Board of Directors Board of Directors Minutes Directory of Members Events At-A-Glance Member Institutions News Users Group Mailing

  14. User Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Information User Information Print ALSHub User Portal User Guide A step-by-step guide for users about how to apply and prepare for beam time at the ALS. Experiment Safety Upon receiving beam time, complete an Experiment Safety Sheet Prospective Users Users from Industry Contacts for Users User Policy Data Management Users' Executive Committee (UEC) User Meeting

  15. Metals Processing Laboratory Users (MPLUS) Facility Annual Report FY 2002 (October 1, 2001-September 30, 2002)

    SciTech Connect (OSTI)

    Angelini, P

    2004-04-27

    The Metals Processing Laboratory Users Facility (MPLUS) is a Department of Energy (DOE), Energy Efficiency and Renewable Energy, Industrial Technologies Program, user facility designated to assist researchers in key industries, universities, and federal laboratories in improving energy efficiency, improving environmental aspects, and increasing competitiveness. The goal of MPLUS is to provide access to the specialized technical expertise and equipment needed to solve metals processing issues that limit the development and implementation of emerging metals processing technologies. The scope of work can also extend to other types of materials. MPLUS has four primary user centers: (1) Processing--casting, powder metallurgy, deformation processing (including extrusion, forging, rolling), melting, thermomechanical processing, and high-density infrared processing; (2) Joining--welding, monitoring and control, solidification, brazing, and bonding; (3) Characterization--corrosion, mechanical properties, fracture mechanics, microstructure, nondestructive examination, computer-controlled dilatometry, and emissivity; and (4) Materials/Process Modeling--mathematical design and analyses, high-performance computing, process modeling, solidification/deformation, microstructure evolution, thermodynamic and kinetic, and materials databases A fully integrated approach provides researchers with unique opportunities to address technologically related issues to solve metals processing problems and probe new technologies. Access is also available to 16 additional Oak Ridge National Laboratory (ORNL) user facilities ranging from state-of-the-art materials characterization capabilities, and high-performance computing to manufacturing technologies. MPLUS can be accessed through a standardized user-submitted proposal and a user agreement. Nonproprietary (open) or proprietary proposals can be submitted. For open research and development, access to capabilities is provided free of charge

  16. Metals Processing Laboratory Users (MPLUS) Facility Annual Report: October 1, 2000 through September 30, 2001

    SciTech Connect (OSTI)

    Angelini, P

    2004-04-27

    The Metals Processing Laboratory Users Facility (MPLUS) is a Department of Energy (DOE), Energy Efficiency and Renewable Energy, Industrial Technologies Program user facility designated to assist researchers in key industries, universities, and federal laboratories in improving energy efficiency, improving environmental aspects, and increasing competitiveness. The goal of MPLUS is to provide access to the specialized technical expertise and equipment needed to solve metals processing issues that limit the development and implementation of emerging metals processing technologies. The scope of work can also extend to other types of materials. MPLUS has four primary User Centers including: (1) Processing--casting, powder metallurgy, deformation processing including (extrusion, forging, rolling), melting, thermomechanical processing, high density infrared processing; (2) Joining--welding, monitoring and control, solidification, brazing, bonding; (3) Characterization--corrosion, mechanical properties, fracture mechanics, microstructure, nondestructive examination, computer-controlled dilatometry, and emissivity; (4) Materials/Process Modeling--mathematical design and analyses, high performance computing, process modeling, solidification/deformation, microstructure evolution, thermodynamic and kinetic, and materials data bases. A fully integrated approach provides researchers with unique opportunities to address technologically related issues to solve metals processing problems and probe new technologies. Access is also available to 16 additional Oak Ridge National Laboratory (ORNL) user facilities ranging from state of the art materials characterization capabilities, high performance computing, to manufacturing technologies. MPLUS can be accessed through a standardized User-submitted Proposal and a User Agreement. Nonproprietary (open) or proprietary proposals can be submitted. For open research and development, access to capabilities is provides free of charge while

  17. LANSCE | Users | User Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANSCE User Program LANSCE's User Program ensures the research it oversees represents the cutting edge of nuclear and materials science and technology. The User Program plays a key role in training the next generation of top scientists, attracting the best graduate students, postdoctoral researchers, and early-career scientists (defined as those less than 40-years old). The User Program typically begins with the first call for proposals and run until the end of the run-cycle. The User-Program

  18. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home Contact User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment...

  19. User Liaison Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Liaison Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. ...

  20. User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Facilities User Facilities User facility agreements allow Los Alamos partners and other entities to conduct research at our unique facilities. In 2011, LANL hosted more than 1,200 users at CINT, LANSCE, and NHMFL. Users came from across the DOE complex, from international academia, and from industrial companies from 45 states across the U.S. Unique world-class user facilities foster rich research opportunities Through its technology transfer efforts, LANL can implement user facility

  1. LANSCE | Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rosen Scholar Rosen Prize Users dotline User Information Planning for Arrival: Contact the User Office several weeks before arriving at LANSCE. The LANSCE User Office will assist you in preparing for your visit to LANSCE. Plan to arrive one day prior to your scheduled beam time. User Office Contacts Division Office Ph: 505.667.5051 Lujan Center User Office lujan-uo@lanl.gov WNR User Program Administrator Tanya Herrera Ph: 505.667.6797 User Office Main Desk Email: lansce-user-office@lanl.gov Ph:

  2. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposals for beam time User publications database Guest logistics and parking Loan of laptop, stealth phone and projector Logisitics for the annual users' meeting ALS Experiment...

  3. Biomass -Feedstock User Facility

    Broader source: Energy.gov (indexed) [DOE]

    Kevin L. Kenney Idaho National Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information Feedstock Supply and Logistics 2 | ...

  4. User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Facilities User Facilities A new research frontier awaits! Our door is open, and we thrive on mutually beneficial partnerships and collaborations that drive innovations and new technologies. Unique world-class user facilities foster rich research opportunities Through its technology transfer efforts, Los Alamos National Laboratory can implement user facility agreements that allow its partners and other entities to conduct research at many of its unique facilities. While our largest user

  5. Documentation, User Support, and Verification of Wind Turbine and Plant Models

    SciTech Connect (OSTI)

    Robert Zavadil; Vadim Zheglov; Yuriy Kazachkov; Bo Gong; Juan Sanchez; Jun Li

    2012-09-18

    As part of the Utility Wind Energy Integration Group (UWIG) and EnerNex's Wind Turbine Modeling Project, EnerNex has received ARRA (federal stimulus) funding through the Department of Energy (DOE) to further the progress of wind turbine and wind plant models. Despite the large existing and planned wind generation deployment, industry-standard models for wind generation have not been formally adopted. Models commonly provided for interconnection studies are not adequate for use in general transmission planning studies, where public, non-proprietary, documented and validated models are needed. NERC MOD (North American Electric Reliability Corporation) reliability standards require that power flow and dynamics models be provided, in accordance with regional requirements and procedures. The goal of this project is to accelerate the appropriate use of generic wind turbine models for transmission network analysis by: (1) Defining proposed enhancements to the generic wind turbine model structures that would allow representation of more advanced; (2) Comparative testing of the generic models against more detailed (and sometimes proprietary) versions developed by turbine vendors; (3) Developing recommended parameters for the generic models to best mimic the performance of specific commercial wind turbines; (4) Documenting results of the comparative simulations in an application guide for users; (5) Conducting technology transfer activities in regional workshops for dissemination of knowledge and information gained, and to engage electric power and wind industry personnel in the project while underway; (6) Designing of a "living" homepage to establish an online resource for transmission planners.

  6. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contacts for Users User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address

  7. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Guide Print 1. Register with the ALS Create an account on ALSHub-the ALS user portal. 2. Apply for Beam Time 3. Establish a User Agreement 4. Comply with Experiment Safety Requirements Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User Satisfaction Survey 9. Report Publications, Awards, Talks, Acknowledging Work at ALS

  8. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs

  9. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Guide Print 1. Register with the ALS Create an account on ALSHub-the ALS user portal. 2. Apply for Beam Time 3. Establish a User Agreement 4. Comply with Experiment Safety Requirements Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User Satisfaction Survey 9. Report Publications, Awards, Talks, Acknowledging Work at ALS

  10. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs

  11. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guide User Guide Print 1. Register with the ALS Create an account on ALSHub-the ALS user portal. 2. Apply for Beam Time 3. Establish a User Agreement 4. Comply with Experiment Safety Requirements Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User Satisfaction Survey 9. Report Publications, Awards, Talks, Acknowledging Work at ALS

  12. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing

  13. User Packages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Packages User Packages There is more than one way for users to manage installation of Python packages on their own. Users of the Anaconda distribution may create their own environments as described here. Users of the NERSC-built modules can use virtualenv, pip, or compile and install Python packages directly. Using "pip" on Edison and Cori There is an issue with the pip command on the Cray systems because of an SSL certificate verification problem. One symptom is that you create

  14. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Author Guidelines User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address

  15. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  16. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  17. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  18. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  19. Canopy 2.1 User Guide

    SciTech Connect (OSTI)

    Burtner, Edwin R.

    2012-09-15

    Its user guide for the Canopy system. Its design to be used electronically or printed out in conjunction with the application to teach users about the features.

  20. Programs & User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Programs » Office of Science » Programs & User Facilities Programs & User Facilities Enabling remarkable discoveries, tools that transform our understanding of energy and matter and advance national, economic, and energy security Advanced Scientific Computing Research Applied Mathematics Co-Design Centers Exascale Co-design Center for Materials in Extreme Environments (ExMatEx) Center for Exascale Simulation of Advanced Reactors (CESAR) Center for Exascale Simulation of

  1. PST user`s guide

    SciTech Connect (OSTI)

    Rempe, J.L.; Cebull, M.J.; Gilbert, B.G.

    1996-10-01

    The Parametric Source Term (PST) software allows estimation of radioactivity release fractions for Level 2 Probabilistic Safety Assessments (PSAs). PST was developed at the Idaho National Engineering Laboratory (INEL) for the Nuclear Regulatory Commission`s (NRC`s) Accident Sequence Precursor (ASP) Program. PST contains a framework of equations that model activity transport between volumes in the release pathway from the core, through the vessel, through the containment, and to the environment. PST quickly obtains exact solutions to differential equations for activity transport in each volume for each time interval. PST provides a superior method for source term estimation because it: ensures conservation of activity transported across various volumes in the release pathway; provides limited consideration of the time-dependent behavior of input parameter uncertainty distributions; allows input to be quantified using state-of-the-art severe accident analysis code results; increases modeling flexibility because linkage between volumes is specified by user input; and allows other types of Light Water Reactor (LWR) plant designs to be evaluated with minimal modifications. PST is a microcomputer-based system that allows the analyst more flexibility than a mainframe system. PST has been developed to run with both MS DOS and MS Windows 95/NT operating systems. PST has the capability to load ASP Source Term Vector (STV) information, import pre-specified default input for the 6 Pressurized Water Reactors (PWRs) initially analyzed in the NRC ASP program, allow input value modifications for release fraction sensitivity studies, export user-specified default input for the LWR being modeled, report results of radioactivity release calculations at each time interval, and generate formatted results that can interface with other risk assessment codes. This report describes the PST model and provides guidelines for using PST.

  2. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs

  3. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User ...

  4. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  5. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  6. Prospective Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from universities, government labs, and industry who are interested in performing experiments at the general sciences and structural biology beamlines open to users. An...

  7. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users - Media Publications and Information The Invisible Neutron Threat Neutron-Induced Failures in Semiconductor Devices Nuclear Science Research at the LANSCE-WNR...

  8. Prospective Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the ALS with all the technical, experiment, and administrative support they require for successful and efficient use of beam time. The kinds of access for users, i.e., General...

  9. NIF Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    users NIF Users Research Opportunities at the National Ignition Facility The National Ignition Facility provides the scientific community with an unprecedented capability for studying materials at extreme pressures, temperatures, and densities. NIF is expected to achieve temperatures and densities almost an order of magnitude greater than those in the sun's core and pressures far in excess of those at the core of Jupiter. The density of neutrons during the tens of picoseconds the NIF target

  10. User Program | Prospective Users US

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Click on the "User Satisfaction Survey" link on the "main menu" page. If you don't have an account you will need to create one. Your login ID (username and email) is the same as ...

  11. SU-E-T-595: Design of a Graphical User Interface for An In-House Monte Carlo Based Treatment Planning System: Planning and Contouring Tools

    SciTech Connect (OSTI)

    EMAM, M; Eldib, A; Lin, M; Li, J; Chibani, O; Ma, C

    2014-06-01

    Purpose: An in-house Monte Carlo based treatment planning system (MC TPS) has been developed for modulated electron radiation therapy (MERT). Our preliminary MERT planning experience called for a more user friendly graphical user interface. The current work aimed to design graphical windows and tools to facilitate the contouring and planning process. Methods: Our In-house GUI MC TPS is built on a set of EGS4 user codes namely MCPLAN and MCBEAM in addition to an in-house optimization code, which was named as MCOPTIM. Patient virtual phantom is constructed using the tomographic images in DICOM format exported from clinical treatment planning systems (TPS). Treatment target volumes and critical structures were usually contoured on clinical TPS and then sent as a structure set file. In our GUI program we developed a visualization tool to allow the planner to visualize the DICOM images and delineate the various structures. We implemented an option in our code for automatic contouring of the patient body and lungs. We also created an interface window displaying a three dimensional representation of the target and also showing a graphical representation of the treatment beams. Results: The new GUI features helped streamline the planning process. The implemented contouring option eliminated the need for performing this step on clinical TPS. The auto detection option for contouring the outer patient body and lungs was tested on patient CTs and it was shown to be accurate as compared to that of clinical TPS. The three dimensional representation of the target and the beams allows better selection of the gantry, collimator and couch angles. Conclusion: An in-house GUI program has been developed for more efficient MERT planning. The application of aiding tools implemented in the program is time saving and gives better control of the planning process.

  12. DAKOTA : a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis. Version 5.0, user's manual.

    SciTech Connect (OSTI)

    Eldred, Michael Scott; Dalbey, Keith R.; Bohnhoff, William J.; Adams, Brian M.; Swiler, Laura Painton; Hough, Patricia Diane; Gay, David M.; Eddy, John P.; Haskell, Karen H.

    2010-05-01

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic finite element methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a user's manual for the DAKOTA software and provides capability overviews and procedures for software execution, as well as a variety of example studies.

  13. User Accounts and Emails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Accounts and Emails Print User Accounts Once a User Agreement is signed, users may ... and Information System (IRIS) . User Emails Users may sign up for a Berkeley Lab ...

  14. Pngv System Analysis Toolkit Non-Proprietary for Electric Vehicle Fuel Economy

    Energy Science and Technology Software Center (OSTI)

    2002-02-01

    The PSAT-NP software is used for hybrid electric vehicle (HEV) simulation. This forward-looking model allows users to simulate more than 150 different HEV configurations through its Graphical User Interface. With the PSAT Graphical User Interface, the user can choose the configurations desired along with the different components to be considered and develop and appropriate control strategy. Several simulations can be run sequentially using PSAT's compilation extension capability.

  15. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Meeting ALS User Meeting web banner ALS User Meeting: October 5-7, 2015 Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops Contact Us User...

  16. Biomass Feedstock National User Facility

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... supply with characterization of feedstock inputs and gasification products (syngas and slag) * Expected Outcomes: - Non-proprietary: MSW characterization, processing data, thermal ...

  17. Pngv System Analysis Toolkit Non-Proprietary for Electric Vehicle Fuel Economy

    Energy Science and Technology Software Center (OSTI)

    2002-02-01

    This is a new version of PSAT. New features include a new Graphical User Interface; an enhanced post processing; new component models, and XML documentation. The PSAT-NP software is used for hybrid electric vehicle (HEV) simulation. This forward-looking model allows users to simulate more than 150 different HEV configurations through its Graphical User Interface. With the PSAT Graphical User Interface, the user can choose the configurations desired along with the different components to be consideredmore » and develop and appropriate control strategy. Several simulations can be run sequentially using PSAT's compilation extension capability.« less

  18. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a.m. - 12.00 p.m. and 1.00 p.m. - 4.00 p.m. User Office Staff Deborah Smith adriana reza This e-mail address is being protected from spambots. You need JavaScript enabled to...

  19. User Statistics Collection Practices Archives | U.S. DOE Office of Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (SC) Policies and Processes » User Statistics Collection Practices » User Statistics Collection Practices Archives User Facilities User Facilities Home User Facilities at a Glance User Resources User Statistics Policies and Processes Definition Designation Process Official List of SC User Facilities User Statistics Collection Practices User Statistics Collection Practices Archives Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of

  20. 2011 User Meeting Award Recipients

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2011 User Meeting Award Recipients Print Recipients of the 2011 Users' Executive Committee awards, Student Poster Competition awards, and Photography Contest awards were announced Tuesday, October 4th at the ALS User Meeting. Winners are pictured below with UEC Chair David Obsorn. David A. Shirley Award for Outstanding Scientific Achievement at the ALS Dr. Subrata Chakraborty, for "the design and execution of the most important and difficult experiment relevant to understanding the origin

  1. A Full-Featured User Friendly CO{sub 2}-EOR and Sequestration Planning Software

    SciTech Connect (OSTI)

    Savage, Bill

    2013-11-30

    A Full-Featured, User Friendly CO{sub 2}-EOR and Sequestration Planning Software This project addressed the development of an integrated software solution that includes a graphical user interface, numerical simulation, visualization tools and optimization processes for reservoir simulation modeling of CO{sub 2}-EOR. The objective was to assist the industry in the development of domestic energy resources by expanding the application of CO{sub 2}-EOR technologies, and ultimately to maximize the CO{sub 2} sequestration capacity of the U.S. The software resulted in a field-ready application for the industry to address the current CO{sub 2}-EOR technologies. The software has been made available to the public without restrictions and with user friendly operating documentation and tutorials. The software (executable only) can be downloaded from NITEC’s website at www.nitecllc.com. This integrated solution enables the design, optimization and operation of CO{sub 2}-EOR processes for small and mid-sized operators, who currently cannot afford the expensive, time intensive solutions that the major oil companies enjoy. Based on one estimate, small oil fields comprise 30% of the of total economic resource potential for the application of CO{sub 2}-EOR processes in the U.S. This corresponds to 21.7 billion barrels of incremental, technically recoverable oil using the current “best practices”, and 31.9 billion barrels using “next-generation” CO{sub 2}-EOR techniques. The project included a Case Study of a prospective CO{sub 2}-EOR candidate field in Wyoming by a small independent, Linc Energy Petroleum Wyoming, Inc. NITEC LLC has an established track record of developing innovative and user friendly software. The Principle Investigator is an experienced manager and engineer with expertise in software development, numerical techniques, and GUI applications. Unique, presently-proprietary NITEC technologies have been integrated into this application to further its ease of

  2. User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Environment Environment on Genepool When you log into the Genepool system you will land in your $HOME directory on NERSC's "global homes" file system. The global homes file system is mounted across all NERSC computation systems with the exception of PDSF. The $HOME directory has quota of 40GB and 1,000,000 inodes. To customize your environment, by setting environment variables or aliases, you will need to modify one of the "dot" files that NERSC has created for you. You

  3. User Statistics Collection Practices | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Statistics Collection Practices User Facilities User Facilities Home User Facilities at a Glance User Resources User Statistics Policies and Processes Definition Designation Process Official List of SC User Facilities User Statistics Collection Practices User Statistics Collection Practices Archives Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P:

  4. OpenEIS. Users Guide

    SciTech Connect (OSTI)

    Kim, Woohyun; Lutes, Robert G.; Katipamula, Srinivas; Haack, Jereme N.; Carpenter, Brandon J.; Akyol, Bora A.; Monson, Kyle E.; Allwardt, Craig H.; Kang, Timothy; Sharma, Poorva

    2015-02-28

    This document is a users guide for OpenEIS, a software code designed to provide standard methods for authoring, sharing, testing, using and improving algorithms for operational building energy efficiency.

  5. 2013 ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 ALS User Meeting banner Home Agenda Awards Exhibitors Lodging Posters Registration T-Shirt Contest Transportation Workshops Contact Us User Meeting Archives Users' Executive...

  6. 2013 ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2013 ALS User Meeting Print banner Home Agenda Awards Exhibitors Lodging Posters Registration T-Shirt Contest Transportation Workshops Contact Us User Meeting Archives Users'...

  7. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting Print web banner ALS User Meeting: October 5-7, 2015 Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops Contact Us User Meeting...

  8. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22013 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  9. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    102115 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  10. MotorMaster+ User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Manual MotorMaster+ User Manual This user manual is designed to help users understand the MotorMaster+ software tool. MotorMaster+ User Manual (1.92 MB) More Documents & Publications MotorMaster+ International Fact Sheet Replacing an Oversized and Underloaded Electric Motor MotorMaster+ Fact Sheet

  11. User Facilities at Argonne | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Facilities at Argonne Argonne National Laboratory designs, builds, and operates national scientific user facilities for the benefit of researchers from industry, academia, and government laboratories. These one-of-a-kind facilities attract great minds from all over the nation to solve society's complex scientific problems. PDF icon User_Facilities

  12. BL 11-2 User Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Support - header Beam Line Status Optics Configuration Model Compound Library Glitch Curves Instrumentation - header Detectors Data Collecting Software Experimental Design...

  13. Trilinos users guide.

    SciTech Connect (OSTI)

    Willenbring, James M.; Heroux, Michael Allen

    2003-08-01

    The Trilinos Project is an effort to facilitate the design, development, integration and ongoing support of mathematical software libraries. A new software capability is introduced into Trilinos as a package. A Trilinos package is an integral unit usually developed by a small team of experts in a particular algorithms area such as algebraic preconditioners, nonlinear solvers, etc. The Trilinos Users Guide is a resource for new and existing Trilinos users. Topics covered include how to configure and build Trilinos, what is required to integrate an existing package into Trilinos and examples of how those requirements can be met, as well as what tools and services are available to Trilinos packages. Also discussed are some common practices that are followed by many Trilinos package developers. Finally, a snapshot of current Trilinos packages and their interoperability status is provided, along with a list of supported computer platforms.

  14. User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Meeting Awards Print web banner ALS User Meeting Awards See the 2013 User Meeting Awards Winners Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee The ALS Users' Executive Committee invites ALS users and staff to submit nominations in recognition of the people who have made significant contributions to the scientific

  15. 2011 User Meeting Award Recipients

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Award Recipients Recipients of the 2011 Users' Executive Committee awards, Student Poster Competition awards, and Photography Contest awards were announced Tuesday, October 4th at the ALS User Meeting. Winners are pictured below with UEC Chair David Obsorn. David A. Shirley Award for Outstanding Scientific Achievement at the ALS Dr. Subrata Chakraborty, for "the design and execution of the most important and difficult experiment relevant to understanding the origin and evolution of the

  16. LANSCE | Users | LUG | Topical User Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 LANSCE Topical User Meeting | January 9-10 2012 LANSCE Topical User Workshop LANSCE will host the 2012 Topical User Workshop, January 9-10, 2012. We hope to see you there! Registration | Accommodations | Agenda (some presentations are included on the agenda) LANL foreign nationals may register at anytime. | Poster Dimensions: 32 in x 40 in This workshop will solicit user input for the scientific opportunities offered by the pulse stacker and superconducting accelerator that LANSCE has proposed

  17. AVRAM user's manual

    SciTech Connect (OSTI)

    McGrady, P.W.

    1988-02-01

    This document details the use of the reliability code for the Atomic Vapor Laser Isotope Separation (AVLIS) project. This code was designed by Tom Anklam and John Harris. In late 1984 Patrick McGrady and Elena Koontz of C and TD/TA were assigned the task of improving the code and converting it for use on the DEC-10 system. In early 1986, Patric McGrady converted it to the CRAY. The AVRAM code is divided into distinct parts (often referred to as programs in this document). There is a COSMOS file that controls the execution of the FORTRAN code and controls the naming of output datasets and the deletion of temporary datasets created by the code. The FORTRAN code consists of a main program as a driver and of three main subroutines: EDIT, PARAM, and AVRAM. The EDIT program allows the user to create a new user defined system or add to an existing system or to change certain parameters. The PARAM program allows the user to alter system parameters and to select options such as economics run, criticality analysis or sensitivity studies. The AVRAM program does a reliability analysis of the system.

  18. SHAFT79 user's manual

    SciTech Connect (OSTI)

    Pruess, K.; Schroeder, R.C.

    1980-03-01

    SHAFT79 (Simultaneous Heat And Fluid Transport) is an integrated finite difference program for computing two-phase non-isothermal flow in porous media. The principal application for which SHAFT79 is designed is in geothermal reservoir simulation. SHAFT79 solves the same equations as an earlier version, called SHAFT78, but uses much more efficient mathematical and numerical methods. The present SHAFT79 user's manual gives a brief account of equations and numerical methods and then describes in detail how to set up input decks for running the program. The application of SHAFT79 is illustrated by means of a few sample problems. (MHR)

  19. Microsoft Word - CR Users Policy1110.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CAMD Cleanroom Users Policy revised 04/11 Statement of Work: A cleanroom environment for processing and m etrology is required for precisi on and reproducibility in Microfabrication. Rules and regulations have been devised to ensure sa fety, high yield, and reliable operation for users and the facility. I. Equipment Use  Equipment training is conducted by the designated equipment manager or appointed Cleanroom Staff . Staff members are ass igned designated machines in which users can request

  20. The High Temperature Materials Laboratory: A research and user facility at the Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    HTML is a modern facility for high-temperature ceramic research; it is also a major user facility, providing industry and university communities access to special research equipment for studying microstructure and microchemistry of materials. User research equipment is divided among six User Centers: Materials Analysis, X-ray Diffraction, Physical Properties, Mechanical Properties, Ceramic Specimen Preparation, and Residual Stress. This brochure provides brief descriptions of each of the major research instruments in the User Centers: scanning Auger microprobe, field emission SEMs, electron microprobe, multitechnique surface analyzer, analytical electron microscope, HRTEM, optical microscopy image analysis, goniometer, scanning calorimetry, simultaneous thermal analysis, thermal properties (expansion, diffusivity, conductivity), high-temperature tensile test facilities, flexure, electromechanical test facilities (flexure, compression creep, environmental), microhardness microprobe, ceramic machining. Hands-on operation by qualified users is encouraged; staff is available. Both proprietary and nonproprietary research may be performed; the former on full cost recovery basis.

  1. The High Temperature Materials Laboratory: A research and user facility at the Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Not Available

    1992-12-01

    HTML is a modern facility for high-temperature ceramic research; it is also a major user facility, providing industry and university communities access to special research equipment for studying microstructure and microchemistry of materials. User research equipment is divided among six User Centers: Materials Analysis, X-ray Diffraction, Physical Properties, Mechanical Properties, Ceramic Specimen Preparation, and Residual Stress. This brochure provides brief descriptions of each of the major research instruments in the User Centers: scanning Auger microprobe, field emission SEMs, electron microprobe, multitechnique surface analyzer, analytical electron microscope, HRTEM, optical microscopy & image analysis, goniometer, scanning calorimetry, simultaneous thermal analysis, thermal properties (expansion, diffusivity, conductivity), high-temperature tensile test facilities, flexure, electromechanical test facilities (flexure, compression creep, environmental), microhardness microprobe, ceramic machining. Hands-on operation by qualified users is encouraged; staff is available. Both proprietary and nonproprietary research may be performed; the former on full cost recovery basis.

  2. Users' Executive Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Executive Committee Print The ALS Users' Executive Committee (UEC) is responsible for conveying the concerns and interests of users to ALS management. Members are elected annually by ALS users. To contact a member of the UEC, please email This e-mail address is being protected from spambots. You need JavaScript enabled to view it . ALS Users' Executive Committee Web Site ALS Users' Association Charter The current members of the committee (with terms), as of January 1, 2016, are David

  3. Users' Executive Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Executive Committee Print The ALS Users' Executive Committee (UEC) is responsible for conveying the concerns and interests of users to ALS management. Members are elected annually by ALS users. To contact a member of the UEC, please email This e-mail address is being protected from spambots. You need JavaScript enabled to view it . ALS Users' Executive Committee Web Site ALS Users' Association Charter The current members of the committee (with terms), as of January 1, 2016, are David

  4. JLF User Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    jlf user group JLF User Group 2015 NIF and JLF User Group Meeting Links: Send request to join the JLF User Group Join the NIF User Group Dr. Carolyn Kuranz - JLF User Group Dr. Carolyn Kuranz received her Ph.D. in Applied Physics from the University of Michigan in 2009. She is currently an Assistant Research Scientist at the Center for Laser Experimental Astrophysical Research and the Center for Radiative Shock Hydrodynamics at the University of Michigan. Her research involves hydrodynamic

  5. Establish a User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is the document that permits the User andor the home organization to retain ownership of intellectual property. Without the user agreement in place, the University of California...

  6. User Accounts and Emails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Accounts and Emails Print User Accounts Once a User Agreement is signed, users may set up an account for miscellaneous supplies and expenses at the ALS. To establish a user account, please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Budget and Planning, (x 6889). Users can keep track of expenses charged to their Berkeley Lab accounts through the Lab's Integrated Reporting and Information System (IRIS) . User Emails Users may sign up

  7. User Accounts and Emails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Accounts and Emails Print User Accounts Once a User Agreement is signed, users may set up an account for miscellaneous supplies and expenses at the ALS. To establish a user account, please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Budget and Planning, (x 6889). Users can keep track of expenses charged to their Berkeley Lab accounts through the Lab's Integrated Reporting and Information System (IRIS) . User Emails Users may sign up

  8. Managing Your User Account

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Managing Your Account Managing Your User Account Use the NERSC Information Management (NIM) system to customize your user account and keep your personal information up-to-date. See the NIM User's Guide, especially the "Managing Your User Account with NIM" section. Last edited: 2016-04-29 11:35:06

  9. Franklin: User Experiences

    SciTech Connect (OSTI)

    National Energy Research Supercomputing Center; He, Yun; Kramer, William T.C.; Carter, Jonathan; Cardo, Nicholas

    2008-05-07

    The newest workhorse of the National Energy Research Scientific Computing Center is a Cray XT4 with 9,736 dual core nodes. This paper summarizes Franklin user experiences from friendly early user period to production period. Selected successful user stories along with top issues affecting user experiences are presented.

  10. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting October 3-5, 2011 Lawrence Berkeley National Laboratory, California

  11. User:DWC Bot | Open Energy Information

    Open Energy Info (EERE)

    funds, proprietary trading companies and brokerage houses, by offering it's world-class financial technology consulting services. DWC solutions are bleeding edge and innovative...

  12. NIF User Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    group NIF User Group The National Ignition Facility User Group provides an organized framework and independent vehicle for interaction between the scientists who use NIF for "Science Use of NIF" experiments and NIF management. Responsibility for NIF and the research programs carried out at NIF resides with the NIF Director. The NIF User Group advises the NIF Director on matters of concern to users, as well as providing a channel for communication for NIF users with funding agencies and

  13. National User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National User Facilities Our Vision National User Facilities Research Areas In Focus Global Solutions ⇒ Navigate Section Our Vision National User Facilities Research Areas In Focus Global Solutions Berkeley Lab's User Facilities-Engines of Discovery Berkeley Lab's User Facilities provide state-of-the-art resources for scientists across the nation and around the world. About 10,000 researchers a year use these facilities, representing nearly one third of the total for all Department of Energy

  14. HTGR Cost Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

  15. 2012 NERSC User Survey Text

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sustainable, and Recyclable Design | Department of Energy 2 London Olympics Go for the Green with Its Energy Efficient, Sustainable, and Recyclable Design 2012 London Olympics Go for the Green with Its Energy Efficient, Sustainable, and Recyclable Design July 26, 2012 - 12:00pm Addthis Olympic stadium, with a roof made of 2,500 tons of steel tubing from recycled gas pipelines, is one example of sustainable design that is part of London's 500-acre Olympic Park. | Photo courtesy of iStock user

  16. Establish a User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Establish a User Agreement Establish a User Agreement Print Wednesday, 26 August 2009 16:00 User Agreements are Required Before a user group can begin their research at the ALS, a User Agreement between Berkeley Lab and the user's sponsoring organization must be signed. Many organizations already have a signed agreement, however if your organization has not established an agreement, please send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view

  17. Establish a User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Establish a User Agreement Print User Agreements are Required Before a user group can begin their research at the ALS, a User Agreement between Berkeley Lab and the user's sponsoring organization must be signed. Many organizations already have a signed agreement, however if your organization has not established an agreement, please send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it to set one up. The User Agreement is valid for up to

  18. Test and User Facilities | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Test and User Facilities Our test and user facilities are available to industry and other organizations for researching, developing, and evaluating energy technologies. We can work with you to design the tests and operate the equipment. A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z A Advanced Research Turbines B Battery Thermal and Life Test Facility Biochemical Conversion Pilot Plant C Controllable Grid Interface Test System D Distributed

  19. OSG New User Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 ...

  20. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    facility. Thorough discussion with users of current projects, as well as plans for the future, will place ALS management in a better position to evaluate the needs of users and...

  1. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated

  2. LANSCE | Users | LUG | Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Charter I. NAME The name of this organization shall be the Los Alamos Neutron Science Center (LANSCE) User Group. II. PURPOSE The purpose of the LANSCE User Group (LUG) is to: * Provide a formal channel for the exchange of information between LANSCE management and the researchers who use the facilities. * Supply a vehicle for users of LANSCE to transmit concerns and recommendations to the LANSCE management about operating policy, facilities, and other matters affecting the user community. *

  3. 2011 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 User Meeting Agenda Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee The 2011 ALS User Meeting begins registation begins at 07:30 on Monday, October 3, outside the Building 50 Auditorium. The meeting itself will start at 08:25 inside the Building 50 Auditorium; all plenary sessions will also be held at

  4. DAKOTA JAGUAR 2.1 user's Manual.

    SciTech Connect (OSTI)

    Adams, Brian M.; Lefantzi, Sophia; Chan, Ethan; Ruthruff, Joseph R.

    2011-06-01

    JAGUAR (JAva GUi for Applied Research) is a Java software tool providing an advanced text editor and graphical user interface (GUI) to manipulate DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) input specifications. This document focuses on the features necessary for a user to use JAGUAR.

  5. Welcome to the SSRL User Research Site | Stanford Synchrotron Radiation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lightsource the SSRL User Research Site Responsive Design User Portal Try the new responsive User Portal platform for your research activities. * IMPORTANT INFORMATION REGARDING ACCESS TO SLAC: To gain access to SLAC, all users must be registered on the SSRL/LCLS user portal and be listed on a scheduled experiment (this will alert Security and the VUE Center). Please coordinate other meetings or visits with your SSRL BL or floor support staff, or contact the URA office for assistance. *

  6. User Program | Prospective Users Non-US

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Click on the "User Satisfaction Survey" link on the "main menu" page. If you don't have an account you will need to create one. Your login ID (username and email) is the same as ...

  7. Early Users to Test New Burst Buffer on Cori

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Early Users to Test New Burst Buffer on Cori Early Users to Test New Burst Buffer on Cori Designed to Accelerate IO Performance October 5, 2015 Corimockup NERSC has selected a ...

  8. Monthly PDSF User Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List Operations for: Passwords & Off-Hours Status...

  9. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 ALS User Meeting Awards Print Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User...

  10. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 ALS User Meeting Awards Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User Meeting. David...

  11. Preliminary Feasibility, Design, and Hazard Analysis of a Boiling Water Test Loop Within the Idaho National Laboratory Advanced Test Reactor National Scientific User Facility

    SciTech Connect (OSTI)

    Douglas M. Gerstner

    2009-05-01

    The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The ATR and its support facilities are located at the Idaho National Laboratory (INL). A Boiling Water Test Loop (BWTL) is being designed for one of the irradiation test positions within the. The objective of the new loop will be to simulate boiling water reactor (BWR) conditions to support clad corrosion and related reactor material testing. Further it will accommodate power ramping tests of candidate high burn-up fuels and fuel pins/rods for the commercial BWR utilities. The BWTL will be much like the pressurized water loops already in service in 5 of the 9 “flux traps” (region of enhanced neutron flux) in the ATR. The loop coolant will be isolated from the primary coolant system so that the loop’s temperature, pressure, flow rate, and water chemistry can be independently controlled. This paper presents the proposed general design of the in-core and auxiliary BWTL systems; the preliminary results of the neutronics and thermal hydraulics analyses; and the preliminary hazard analysis for safe normal and transient BWTL and ATR operation.

  12. Corrosion and materials selection report update non-proprietary version. Final technical report

    SciTech Connect (OSTI)

    Agrawal, P.D.

    1984-06-01

    The revised Baseline design (dated 22 October, 1982) used most of the available information with regard to the corrosion, erosion and materials of construction. This information was collected through various programs conducted at the major coal liquefaction pilot plants, e.g. SRC-1 and SRC-2, H-Coal and EDS, and at various research laboratories. The selection of materials of construction was also based on certain basic assumptions with regard to the plant life and life of each type of equipment. Other selection criteria included various process considerations and economics. In cases where no data on corrosion and erosion was available, past experience, licensors' knowhow and engineering judgement, were utilized in the selection process. Beyond the date of publication of the revised Baseline document, additional data from various pilot plants and lab programs has been made available. On account of continuous review being performed by DOE and their subcontractors and consultants, a number of comments were forwarded to ICRC. These comments and latest developmental programs suggested several improvements in the design. This report consists of the following major sections: A discussion on corrosion/erosion related research and pilot plant programs; the materials selection criterion, including plant and equipment life, and various process considerations, are discussed in detail; copies of the materials diagrams from the Revised Baseline are attached; ICRC response to unresolved materials-related comments is included in the Appendix A; areas of concern and data gaps, with regard to the materials of construction are identified; and recommended areas of future research and development programs are listed.

  13. DOEGO85004_1: Final Non-proprietary Technical Report, Generating Process and Economic Data for Preliminary Design of PureVision Biorefineries DOEGO85004_2: One Original Final Proprietary Technical Report to be mailed to DOE Golden.

    SciTech Connect (OSTI)

    Kadam, Kiran L., Ph.D; Lehrburger, Ed

    2008-01-17

    The overall objective of the project was to define a two-stage reactive fractionation process for converting corn stover into a solid cellulose stream and two liquid streams containing mostly hemicellulosic sugars and lignin, respectively. Toward this goal, biomass fractionation was conducted using a small continuous pilot unit with a nominal capacity of 100 pounds per day of dry biomass to generate performance data using primarily corn stover as feedstock. In the course of the program, the PureVision process was optimized for efficient hemicellulose hydrolysis in the first stage employing autohydrolysis and delignification in the second stage using sodium hydroxide as a catalyst. The remaining cellulose was deemed to be an excellent substrate for producing fermentation sugars, requiring 40% less enzymes for hydrolysis than conventional pretreatment systems using dilute acid. The fractionated cellulose was also determined to have potential higher-value applications as a pulp product. The lignin coproduct was determined to be substantially lower in molecular weight (MW) compared to lignins produced in the kraft or sulfite pulping processes. This low-MW lignin can be used as a feed and concrete binder and as an intermediate for producing a range of high-value products including phenolic resins. This research adds to the understanding of the biomass conversion area in that a new process was developed in the true spirit of biorefineries. The work completed successfully demonstrated the technical effectiveness of the process at the pilot level indicating the technology is ready to advance to a 2–3 ton per day scale. No technical showstoppers are anticipated in scaling up the PureVision fractionation process to commercial scale. Also, economic feasibility of using the PureVision process in a commercial-scale biorefinery was investigated and the minimum ethanol selling price for the PureVision process was calculated to be $0.94/gal ethanol vs. $1.07/gal ethanol for the NREL process. Thus, the PureVision process is economically attractive. Given its technical and economic feasibility, the project is of benefit to the public in the following ways: 1) it demonstrated a novel biomass fractionation process that can provide domestic supply of renewable transportation fuel from all three biomass components (cellulose, hemicellulose and lignin), 2) the lignin stream from the process has many higher-value applications beyond simply burning the lignin for energy as proposed by competing technologies, 3) it can be deployed in rural areas and create jobs in these areas, and 3) it can add to the nation’s economy and security.

  14. PIA - Advanced Test Reactor National Scientific User Facility Users Week

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2009 | Department of Energy Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 (316.78 KB) More Documents & Publications PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE PIA - INL Education Programs Business Enclav

  15. NuMAD User's Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7028 Unlimited Release Printed August 2012 Numerical Manufacturing And Design Tool (NuMAD v2.0) for Wind Turbine Blades: User's Guide Jonathan C. Berg and Brian R. Resor Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security

  16. Cohesive Zone Model User Element

    Energy Science and Technology Software Center (OSTI)

    2007-04-17

    Cohesive Zone Model User Element (CZM UEL) is an implementation of a Cohesive Zone Model as an element for use in finite element simulations. CZM UEL computes a nodal force vector and stiffness matrix from a vector of nodal displacements. It is designed for structural analysts using finite element software to predict crack initiation, crack propagation, and the effect of a crack on the rest of a structure.

  17. LANSCE | User Resources | User Satisfaction Survey

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Satisfaction Survey We hope that your research at the Los Alamos Neutron Science Center was productive and successful. Your feedback is important to the Department of Energy and us. Please take a few minutes to respond to the questions on the following page. Your assessment of your experience at LANSCE is used by DOE to evaluate and fund the facility, by the User Group Executive Committee to determine issues and to make recommendations to address them, and by the management and staff of

  18. General User Proposals (GUPs)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General User Proposals (GUPs) General User Proposals (GUPs) Print Tuesday, 01 June 2010 09:36 General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the Participating Research Team (PRT) that operates the beamline. Before Submitting a Proposal Review the ALS Beamlines Directory to learn about the research capabilities of individual beamlines at the ALS. Contact the beamline scientist or the local contact listed in

  19. Shifter: User Defined Images

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shifter: User Defined Images Shifter: User Defined Images Shifter: Bringing Linux containers to HPC NERSC is working to increase flexibility and usability of its HPC systems by enabling Docker-like Linux container technology. Linux containers allow an application to be packaged with its entire software stack - including some portions of the base OS files - as well defining needed user environment variables and application "entry point.". Containers may provide an abstract way of

  20. 2015 CAMD Users Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CAMD 2015 Symposium followed by the CAMD Users' Meeting SAXS Workshop Thursday, April 23th, 2015 CAMD, 6980 Jefferson Highway, Baton Rouge, LA 70806 CAMD 2015 Symposium followed by the CAMD Users' Meeting Friday, April 24th, 2015 LTRC Transportation Training and Education Center (Map) The CAMD 2015 Symposium followed by the CAMD Users' Meeting will be held on Friday, April 24th at the LTRC Transportation Training and Education Center, 4099 Gourrier Avenue, Baton Rouge, LA 70808, directly behind

  1. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Executive Committee ALS Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing

  2. LANSCE | User Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    From the initial proposal process to the completion of the experiment, LANSCE provides its users with resources critical to their experiements and their experience. Lujan Resources pRad Resources WNR Resources Submit a proposal for beam time Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Submit a proposal for beam time Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Submit a proposal for beam time Visit Registration Schedules

  3. Users from Industry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, and/or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial

  4. 2013 User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 User Meeting Awards Recipients of the 2013 Users' Executive Committee awards and the Student Poster Competition awards, were presented Tuesday, October 8, at the ALS User Meeting. David A. Shirley Award for Outstanding Scientific Achievement at the ALS 2013-shirley The David A. Shirley Award for Scientific Achievement went to Harald Ade, North Carolina State University, "For achievements in polymer science and in particular the elucidation of the chemical nano-morphology of complex

  5. ALS User Meeting Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting Archives Print Past User Meeting Programs, Workshops, and Awards Year David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2015 Program Workshops Wanli Yang, "For new concepts optimizing battery materials with the aid of soft x-ray microscopy." Hans Bechtel, Michael Martin, and Markus Raschke, "For the development of Synchrotron Infrared Nano Spectroscopy (SINS)." David Malone. "As the first person all 2400 ALS users contact

  6. 2011 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee The 2011 ALS User Meeting begins registation begins at 07:30 on Monday, October 3, outside the Building 50 Auditorium. The meeting itself will start at 08:25 inside the Building 50 Auditorium; all plenary sessions will also be held at this location.

  7. 2011 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2011 User Meeting Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee Workshops will follow the end of the plenary sessions on Tuesday and continue through Wednesday.When registering , you will be asked to select the workshop that you plan to attend; this helps organizers plan room assignments and

  8. 2012 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshops 2012 ALS User Meeting Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee Advanced Characterization of Critical Magnetic Materials Catherine Jenkins, Peter Fischer, Elke Arenholz, and David Shuh (LBNL) 67-3111 (Wed.) Automating Tomographic Data Analysis: Transfer, Storage, Processing, and Simulation Dula

  9. CNMS User Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Standards and Technology (NIST) and he is working towards developing novel scanning force probes using cavity optomechanics. Research Highlights CNMS User Newsletter Page 7...

  10. User account | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Log in(active tab) Logon Help User login Username * JLAB/CUE Username Password * JLAB/CUE Password Log in

  11. 2012 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshops Print 2012 ALS User Meeting Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from...

  12. 2012 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 User Meeting Agenda Print Agenda Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from spambots. You...

  13. 2001 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Questions and Changes from Previous Years NERSC Information Management (NIM) System Web and Communications Hardware Resources Software Training User Services Comments about...

  14. Users from Industry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, andor...

  15. 2014 NERSC User Survey

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Survey 2014 NERSC User Survey December 17, 2014 by Francesca Verdier Please take a few minutes to fill out NERSC's annual user survey. Your feedback is important because it allows us to judge the quality of our services, give DOE information on how we are doing, and point us to areas in which we can improve. The survey is on the web at the URL: https://www.nersc.gov/news-publications/publications-reports/user-surveys/2014/ and covers the allocation year 2014. Subscribe via RSS Subscribe

  16. 2004 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    13 | Next 2004 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness...

  17. 2005 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 | Next 2005 User Survey Results Table of Contents Response Summary Respondent Demographics All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software...

  18. 2003 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 | Next 2003 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction Topics and Changes from...

  19. LANSCE | Training Office | User Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    phone: 505.665.1010 mesa header Beam Status Accelerator Ops (Internal) Operating Schedule Long Range Operating Schedule User Resources User Agreements Proposals Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Users User Office User Program LANSCE User Group Rosen Scholar Rosen Prize News & Multimedia News Multimedia Events Profiles Highlights Seminars Activity Reports The Pulse User Program Headlines About LANSCE History Leadership LINAC Outreach Affiliations

  20. MRDAP User/Developer Documentation

    SciTech Connect (OSTI)

    Joshua Cogliati; Michael Milvich

    2009-09-01

    The Multi-Reactor Design and Analysis Platform (MRDAP) is designed to simplify the creation, transfer and processing of data between computational codes. MRDAP accomplishes these objectives with three parts: 1. allows each integrated code, through a plugin, to specify the required input for execution and the required output needed, 2. creates an interface for execution and data transfer, 3. enables the creation of Graphical User Interfaces (GUI) to assist with input preparation and data visualization. Ultimately, the main motivation of this work is to enable analysts (who perform reactor physics calculations routinely), by providing a tool that increases efficiency and minimizes the potential for errors or failed executions.

  1. KDYNA user's manual

    SciTech Connect (OSTI)

    Levatin, J.A.L.; Attia, A.V.; Hallquist, J.O.

    1990-09-28

    This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

  2. The PANTHER User Experience

    SciTech Connect (OSTI)

    Coram, Jamie L.; Morrow, James D.; Perkins, David Nikolaus

    2015-09-01

    This document describes the PANTHER R&D Application, a proof-of-concept user interface application developed under the PANTHER Grand Challenge LDRD. The purpose of the application is to explore interaction models for graph analytics, drive algorithmic improvements from an end-user point of view, and support demonstration of PANTHER technologies to potential customers. The R&D Application implements a graph-centric interaction model that exposes analysts to the algorithms contained within the GeoGraphy graph analytics library. Users define geospatial-temporal semantic graph queries by constructing search templates based on nodes, edges, and the constraints among them. Users then analyze the results of the queries using both geo-spatial and temporal visualizations. Development of this application has made user experience an explicit driver for project and algorithmic level decisions that will affect how analysts one day make use of PANTHER technologies.

  3. 2002 Manufacturing Energy Consumption Survey - User Needs Survey

    U.S. Energy Information Administration (EIA) Indexed Site

    2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next Energy Consumption Survey (MECS) As our valued...

  4. User`s guide to MIDAS

    SciTech Connect (OSTI)

    Tisue, S.A.; Williams, N.B.; Huber, C.C.; Chun, K.C.

    1995-12-01

    Welcome to the MIDAS User`s Guide. This document describes the goals of the Munitions Items Disposition Action System (MIDAS) program and documents the MIDAS software. The main text first describes the equipment and software you need to run MIDAS and tells how to install and start it. It lists the contents of the database and explains how it is organized. Finally, it tells how to perform various functions, such as locating, entering, viewing, deleting, changing, transferring, and printing both textual and graphical data. Images of the actual computer screens accompany these explanations and guidelines. Appendix A contains a glossary of names for the various abbreviations, codes, and chemicals; Appendix B is a list of modem names; Appendix C provides a database dictionary and rules for entering data; and Appendix D describes procedures for troubleshooting problems associated with connecting to the MIDAS server and using MIDAS.

  5. User Group/PI:______________________________________ Exp. No...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor network password 3. Export Control and Proprietary Information a.Work for Homeland Security, DoD, private companies b. Deemed exports 4. Important phone numbers (Area code: ...

  6. STATEMENT OF CONSIDERATIONS CLASS WANER OF THE GOVERNMENT'S

    Broader source: Energy.gov (indexed) [DOE]

    RIGHTS AT DESIGNATED PROPRIETARY USER FACILITIES: DOE WAIVER NO. W(C)2008-005. This Class Waiver is intended to apply to public and private organizations (hereinafter,...

  7. The Radiological Safety Analysis Computer Program (RSAC-5) user`s manual. Revision 1

    SciTech Connect (OSTI)

    Wenzel, D.R.

    1994-02-01

    The Radiological Safety Analysis Computer Program (RSAC-5) calculates the consequences of the release of radionuclides to the atmosphere. Using a personal computer, a user can generate a fission product inventory from either reactor operating history or nuclear criticalities. RSAC-5 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated through the inhalation, immersion, ground surface, and ingestion pathways. RSAC+, a menu-driven companion program to RSAC-5, assists users in creating and running RSAC-5 input files. This user`s manual contains the mathematical models and operating instructions for RSAC-5 and RSAC+. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-5 and RSAC+. These programs are designed for users who are familiar with radiological dose assessment methods.

  8. LANSCE | Users | LUG

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LUG-EC 2016 LUG EC Meeting 2015 LUG EC Meeting 2014 LUG EC Summary and Charge 2014 LUG EC Meeting 2013 LUG EC Meeting LUG Charter LUG Election LUG 2015 Meeting LUG 2012 Meeting Rosen Scholar Rosen Prize Users dotline LANSCE User Group (LUG) 2016 LUG Executive Committee Election Election is now closed. Thank you for voting! Results will be announced soon. The Executive Committee of the LANSCE User Group (LUG-EC) is seeking new representatives to serve on the Executive Committee beginning CY 2016.

  9. For Industrial Users | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Center for Nanoscale Materials (CNM) has specific interest in growing the industrial user program and encourages researchers in industry to consider the capabilities and expertise we have to offer. As a CNM user, you have easy access to sophisticated scientific instrumentation geared toward nanoscience and nanotechnology. Moreover, our widely recognized staff researchers offer support in designing your experiments, using the equipment, and analyzing your data. Access to the CNM is through

  10. User Liaison Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office Space User space is available in the ARC, reserve space here. arc-thumb.jpg Click to see Virtual Tour 12000 Jefferson Avenue, Newport News, VA 23606 Phone: (757) 269-7255...

  11. User account | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Error message Access denied. You must log in to view this page. Log in(active tab) Logon Help User login Username * JLAB/CUE Username Password * JLAB/CUE Password Log in

  12. CNMS User Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at the 4th annual Na onal User Facility Science Expo for the U.S. House of Representa ves in the foyer of the Ray- burn House Office Building, Capitol Hill Washington D.C.....

  13. 2012 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Amorphous-to-Crystalline Transitions in CaCO3 Biominerals, with 20-nm Resolution Pupa Gilbert, University of Wisconsin 13:55 User Services Update Sue Bailey, LBNL 14:10...

  14. User Accounts (Logins)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A user is given a username (also known as a login name) and associated password that permits them to access NERSC resources. This usernamepassword pair may be used by a single ...

  15. CNMS User Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    systems. Access is provided at no cost to users for research that is in the public do- main and intended for publica on in the open literature. The submission deadline is...

  16. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  17. General User Proposals (GUPs)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or until the number of shifts recommended by the Proposal Study Panels (PSP) for the life of the proposal have been used. Users may decide whether to submit a new proposal or...

  18. ARM User Survey Report

    SciTech Connect (OSTI)

    Roeder, LR

    2010-06-22

    The objective of this survey was to obtain user feedback to, among other things, determine how to organize the exponentially growing data within the Atmospheric Radiation Measurement (ARM) Climate Research Facility, and identify users’ preferred data analysis system. The survey findings appear to have met this objective, having received approximately 300 responses that give insight into the type of work users perform, usage of the data, percentage of data analysis users might perform on an ARM-hosted computing resource, downloading volume level where users begin having reservations, opinion about usage if given more powerful computing resources (including ability to manipulate data), types of tools that would be most beneficial to them, preferred programming language and data analysis system, level of importance for certain types of capabilities, and finally, level of interest in participating in a code-sharing community.

  19. User Data Forum Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    M08: Databases and Data analytic frameworks at NERSC June 16, 2014 | Author(s): Yushu Yao, NERSC User Services Group | Download File: M08-20140616-NERSC-Data-Forum-DB-SciDB-Talk-v2...

  20. User Data Forum Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations User Data Forum Presentations Sort by: Default | Name | Date (low-high) | ... M02: The Future of Data and Scientific Workflow June 16, 2014 | Author(s): Michael Wilde, ...

  1. NIM Guide for Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The NERSC Information Management (NIM) system is a web portal that contains user, login ... Logging In To log into the NIM system, point your web browser to the URL http:...

  2. NERSC Usage and User Demographics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage Demographics Users and Projects Through the Years Careers Visitor Info Web Policies Home » About » Usage and User Demographics NERSC Usage and User Demographics Usage Demographics Number of NERSC Users and Projects Through the Years Number of NERSC Users and Projects Through the Years Read More » Last edited: 2015-03-02 16:21:25

  3. New Users Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Storing and Retrieving Data Advanced Usage Examples Charging Storage Statistics Troubleshooting I/O Resources for Scientific Applications at NERSC Optimizing I/O performance on the Lustre file system I/O Formats Science Databases Sharing Data Transferring Data Unix Groups at NERSC Unix File Permissions Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List

  4. General User Proposals (GUPs)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General User Proposals (GUPs) Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the Participating Research Team (PRT) that operates the beamline. Before Submitting a Proposal Review the ALS Beamlines Directory to learn about the research capabilities of individual beamlines at the ALS. Contact the beamline scientist or the local contact listed in the tables, for additional information about the

  5. JLF User Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    program JLF User Program The Jupiter Laser Facility User Program is open to all qualified applicants; US and non-US PIs are welcome to submit proposals. A proposal is necessary for shot-time allocated on the Titan, Janus, and COMET laser platforms at JLF. Using technical evaluations from experts, proposals will be reviewed and ranked by the JLF Advisory Committee based on scientific and/or programmatic quality, impact, and feasibility. Typically, all platforms are overrequested by a factor of

  6. LANSCE | User Resources | Schedules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schedules You will be notified of your experiment schedule at least 3-6 weeks prior to your start date. Two (2) weeks post-review, beam-time will be scheduled by the Instrument Scientist in consultation with the user. Three (3) weeks post review, schedule letters are sent to the Principal Investigator. After scheduling experiments, the LANSCE User Office will contact you to determine and schedule applicable training, assist with travel arrangements, initiate and required foreign national access

  7. LANSCE | Users | Rosen Prize

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rosen Prize Current Recipient Past Recipients Call for Nominations Users dotline The Louis Rosen Prize Adam T. Holley Adam T. Holley Named 24th Rosen Prize Recipient The LANSCE User Group Executive Committee is pleased to announce that Adam Holley has been awarded the 2013 Rosen Prize for his doctoral thesis on "Ultracold Neutron Polarimetry in a Measurement of the β Asymmetry". His work demonstrated excellence in a number of facets the selection committee considered, including

  8. VOLTTRON: User Guide

    SciTech Connect (OSTI)

    Lutes, Robert G.; Katipamula, Srinivas; Akyol, Bora A.; Tenney, Nathan D.; Haack, Jereme N.; Monson, Kyle E.; Carpenter, Brandon J.

    2014-04-24

    This document is a user guide for the deployment of the Transactional Network platform and agent/application development within the VOLTTRON. The intent of this user guide is to provide a description of the functionality of the Transactional Network Platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  9. ALS User Meeting Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meeting Archives Past User Meeting Programs, Workshops, and Awards Year David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2015 Program Workshops Wanli Yang, "For new concepts optimizing battery materials with the aid of soft x-ray microscopy." Hans Bechtel, Michael Martin, and Markus Raschke, "For the development of Synchrotron Infrared Nano Spectroscopy (SINS)." David Malone. "As the first person all 2400 ALS users contact for their beam

  10. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will be in

  11. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will be in

  12. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will

  13. 2011 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee Workshops will follow the end of the plenary sessions on Tuesday and continue through Wednesday.When registering , you will be asked to select the workshop that you plan to attend; this helps organizers plan room assignments and refreshments.

  14. LANSCE | Users | LUG | Topical User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda (some presentations are included below) Sunday 4:00pm-6:00pm Registration: Best Western Monday 7:30am Registration: LANSCE, Bldg 1 Facility Presentations | LANSCE, Rosen Auditorium 8:15am-8:22am LANSCE User Group Executive Committee Welcome: Steve Conradson 2011 LUG-EC Chair 8:23am-8:30am Worshop Goals/Processes Kurt Schoenberg LANSCE Facility Director 8:30am-9:00am LANSCE Overview and Future Opportunities Kurt Schoenberg LANSCE Facility Director 9:00am-9:30am Nuclear Neutron Science at

  15. DOE Designated User Facilities Multiple Laboratories

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Gaining Recognition as a Leader," originally presented in May 2013. In addition to this text version of the audio, you can access a recording of the webinar. Sam Rashkin: Slide 1: This is about the DOE Challenge Home as a way for builders to be recognized a leader. Eventually Challenge Home is promoting zero energy ready homes across the country. I believe the business model that we're kinda tapping into is the old Apple business model, which is, they build products

  16. Restoration Prioritization Toolset: Documentation and Users Guides 2007

    SciTech Connect (OSTI)

    Judd, Chaeli; Woodruff, Dana L.; Thom, Ronald M.; Anderson, Michael G.; Borde, Amy B.

    2007-10-26

    This users guide provides technical background and details on the Restoration Prioritization Toolset developed for GoMRC as well as instructions for use.

  17. CADCAM-009: VERTRAN user's manual

    SciTech Connect (OSTI)

    Blackledge, M.A.

    1985-01-01

    Sandia National Laboratories has been assigned Lead Lab responsibility by the Department of Energy (DOE) for integrating computer-aided design/computer-aided manufacturing (CAD/CAM) activities throughout DOE's Nuclear Weapons Complex (NWC). A primary objective is automating the exchange of product definition data within the NWC. It is essential that data integrity be preserved and verified following each such data exchange. VERTRAN (for VERification of TRANsferred data) is a software based method for detecting differences in the geometric data of a computer product definition file that has been transferred from one CAD system to another. Complete user instructions and program responses are provided.

  18. 2011 NERSC User Survey (Read Only)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2010/2011 User Survey Results Survey Text 2009/2010 User Survey Results 2008/2009 User Survey Results 2007/2008 User Survey Results 2006 User Survey Results 2005 User Survey Results 2004 User Survey Results 2003 User Survey Results 2002 User Survey Results 2001 User Survey Results 2000 User Survey Results 1999 User Survey Results 1998 User Survey Results HPC Requirements for Science HPC Workshop Reports NERSC Staff Publications & Presentations Journal Cover Stories Galleries facebook icon

  19. NERSC User Announcements RSS Feed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements RSS Feed NERSC User Announcements RSS Feed June 30, 2014 by Richard Gerber NERSC's User Announcements (not these "Featured Announcements") are now available as an RSS...

  20. User account | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User account User account Primary tabs Log in Request new password(active tab) Username or e-mail address * E-mail new password

  1. GRSAC Users Manual

    SciTech Connect (OSTI)

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  2. 2016 CAMD User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CAMD 2016 User Meeting Friday, April 29th, 2016 CAMD, 6980 Jefferson Highway, Baton Rouge, LA 70806 The CAMD 2016 User Meeting will be held on Friday, April 29th at CAMD, 6980 Jefferson Highway, Baton Rouge, LA 70806. There will be a "Celebration of MPW" in the morning, coinciding with a poster session in the Experimental Hall starting at 10:30 AM. Beamline scientists will be on hand to explain the new features of the multi-pole wiggler beamlines. Lunch will be provided before the

  3. User Submitted Research Citations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Submitted Research Citations User Submitted Research Citations Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category Picture1 Miro Conjugation-Driven "Reverse Mars-van Krevelen"-Type Radical Mechanism for Low-Temperature C-O Bond Activation June 9, 2016 | Author(s): Alexander V. Mironenko. Dionisios G. Vlachos | Source: Mironenko, Alexander V., and Dionisios G. Vlachos. "Conjugation-driven "Reverse Mars-van Krevelen"-type Radical Mechanism

  4. Composite Tube Trailer Design/Manufacturing Needs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Composite Tube Trailer Design/Manufacturing Needs Norman L. Newhouse, Ph.D., P.E. Lincoln Composites, Inc. August 11-12, 2011 This presentation does not contain any proprietary, confidential, or otherwise restricted information Overview * Lincoln Composites has, with support from DOE, built composite tube trailers and can, therefore, address issues with: - Design - Materials - Manufacturing - Testing - Approvals 2 Objectives * Meet market needs for cost effective, light weight, bulk transport of

  5. Nuclear Physics: User/Researcher Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UserResearcher Information New User Checklist us citizen non-us-citizen us citizen About User Liaison User Liaison facilitates the lab's scientific program by maintaining ...

  6. LANSCE | Users | LUG | LUG EC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Executive Committee The LANSCE User Group (LUG) is comprised of current users. LUG provides direct input to LANSCE management, primarily through LUG's Executive Committee. The members of the LANSCE User Group Executive Committee are elected by the vote of the LUG membership, they represent the entire user community and provide direct user input to LANSCE management on matters ranging from current facility operations to planning for the future. Membership terms are staggered to maintain

  7. APS User Operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schedules APS Schedule Useful Links Beamline Design Library (former Design Exchange) Machine Status Link Bunch Clock Information APS Systems Status Storage Ring Operating Status...

  8. Turbsim User's Guide: Version 1.50

    SciTech Connect (OSTI)

    Jonkman, B. J.

    2009-09-01

    This report is a user's guide for the TurbSim code. TurbSim stochastic inflow turbulence code is a wind turbine design code that simulates a full-field flow containing coherent turbulence associated with nocturnal boundary layer flows.

  9. DAKOTA JAGUAR 3.0 user's manual.

    SciTech Connect (OSTI)

    Adams, Brian M.; Bauman, Lara E; Chan, Ethan; Lefantzi, Sophia; Ruthruff, Joseph R.

    2013-05-01

    JAGUAR (JAva GUi for Applied Research) is a Java software tool providing an advanced text editor and graphical user interface (GUI) to manipulate DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) input specifications. This document focuses on the features necessary to use JAGUAR.

  10. HTGR Application Economic Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  11. RELAP-7 User's Guide

    SciTech Connect (OSTI)

    Zhang, Hongbin; Zhao, Haihua; Zou, Ling; Andrs, David; Berry, Ray Alden; Martineau, Richard Charles

    2014-12-01

    The document contains a user's guide on how to run the RELAP-7 code. The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory. RELAP-7 will become the main reactor systems simulation toolkit for the LWRS (Light Water Reactor Sustainability) program’s RISMC (Risk Informed Safety Margin Characterization) effort and the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 is written with object oriented programming language C++. A number of example problems and their associated input files are presented in this document to guide users to run the RELAP-7 code starting with simple pipe problems to problems with increasing complexity.

  12. U-074: Microsoft.NET Bugs Let Remote Users Execute Arbitrary Commands, Access User Accounts, and Redirect Users

    Broader source: Energy.gov [DOE]

    A remote user can execute arbitrary commands on the target system. A remote user can access a target user's account. A remote user can redirect users to arbitrary sites.

  13. LANSCE | Users | Rosen Scholar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Past Scholars Call for Nominations Rosen Prize Users dotline Rosen Scholar | Dr. Markus Roth Markus Roth Dr. Markus Roth is a Full Professor at the University of Technology in Darmstadt, Germany at the Institute for Nuclear Physics, where he has been since 2003. He leads a research group that is also associated with the German National Laboratory "Gesellschaft für Schwerionenforschung (GSI)," with the main focus on dense plasma physics, advanced diagnostic methods, and particle

  14. NERSC User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment NERSC User Environment Home Directories, Shells and Dotfiles All NERSC systems use global home directories, which are are pre-populated with shell initialization files (also known as dotfiles) for all available shells. NERSC fully supports bash, csh, and tcsh as login shells. Other shells (ksh, sh, and zsh) are also available. The default shell at NERSC is csh. Dotfiles The "standard" dotfiles are symbolic links to read-only files that NERSC controls. For each standard

  15. Macro System Model (MSM) User Guide, Version 1.3

    SciTech Connect (OSTI)

    Ruth, M.; Diakov, V.; Sa, T.; Goldsby, M.

    2011-09-01

    This user guide describes the macro system model (MSM). The MSM has been designed to allow users to analyze the financial, environmental, transitional, geographical, and R&D issues associated with the transition to a hydrogen economy. Basic end users can use the MSM to answer cross-cutting questions that were previously difficult to answer in a consistent and timely manner due to various assumptions and methodologies among different models.

  16. 2011 CNM Users Meeting | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Press Releases Feature Stories In the News Users Meetings 2015 Users Meeting 2014 Users Meeting 2013 Users Meeting 2012 Users Meeting 2011 Users Meeting 2009 Users Meeting 2008 Users Meeting 2007 Users Meeting Workshops Photos Videos Career Opportunities CNM Intranet CNM on Facebook Career Opportunities CNM Intranet CNM on Facebook Argonne National Laboratory Center for Nanoscale Materials About Research Capabilities For Users People Publications News & Events News & Events

  17. 2012 CNM Users Meeting | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Press Releases Feature Stories In the News Users Meetings 2015 Users Meeting 2014 Users Meeting 2013 Users Meeting 2012 Users Meeting 2011 Users Meeting 2009 Users Meeting 2008 Users Meeting 2007 Users Meeting Workshops Photos Videos Career Opportunities CNM Intranet CNM on Facebook Career Opportunities CNM Intranet CNM on Facebook Argonne National Laboratory Center for Nanoscale Materials About Research Capabilities For Users People Publications News & Events News & Events

  18. SSRL User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    07/25/16 SSRL User Financial Account Form Establish an SSRL user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities or to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of

  19. User Program Performance Monitor

    Energy Science and Technology Software Center (OSTI)

    1983-09-30

    PROGLOOK makes it possible to monitor the execution of virtually any OS/MVT or OS/VS2 Release 1.6 load module. The main reason for using PROGLOOK is to find out which portions of a code use most of the CPU time so that those parts of the program can be rewritten to reduce CPU time. For large production programs, users have typically found it possible to reduce CPU time by 10 to 30 percent without changing themore » program''s function.« less

  20. Weekly User Schedule

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weekly User Schedule Print Requests for special operations use of the "scrubbing" shift should be sent directly to Warren Byrne (486-7517) by 1:00 p.m. Friday. Any requests for changes in beam energy, bucket fill pattern, scrubbing shifts, or machine setup must be submitted to This e-mail address is being protected from spambots. You need JavaScript enabled to view it by 4:00 pm on Wednesday, the week before the scheduled run, for consideration during Thursday's Physics meeting. These

  1. Weekly User Schedule

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weekly User Schedule Print Requests for special operations use of the "scrubbing" shift should be sent directly to Warren Byrne (486-7517) by 1:00 p.m. Friday. Any requests for changes in beam energy, bucket fill pattern, scrubbing shifts, or machine setup must be submitted to This e-mail address is being protected from spambots. You need JavaScript enabled to view it by 4:00 pm on Wednesday, the week before the scheduled run, for consideration during Thursday's Physics meeting. These

  2. User-centered guidelines for environmental management

    SciTech Connect (OSTI)

    Eike, D.R.; Fox, J.A.; Dailey, R.

    1993-08-01

    Environmental Management requirements facing US Department of Energy (DOE) facilities are detailed, complex, and often subject to rapid change. DOE`s Office of Environmental Guidance, RCRA/CERCLA Division (EH-231), is responsible for developing and issuing guidance to assist DOE facilities in interpreting and complying with Federal, State, and local requirements. Recognizing the potential for computerization of the guidance, EH-231 requested that Pacific Northwest Laboratory (PNL) develop an approach for preparing automated guidance. The approach developed by PNL, termed ``user-centered guidance,`` combines participatory design and traditional rapid prototyping techniques to produce a new form of environmental guidance that emphasizes the user`s needs. This paper describes the objectives, processes and current status of this effort.

  3. Molecular Foundry User Meeting - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Molecular Foundry User Meeting Molecular Foundry User Meeting Thu, Aug 11, 2016 5:00pm 17:00 Fri, Aug 12, 2016 6:00pm 18:00 Lawrence Berkeley National Laboratory Berkeley, CA USA The Molecular Foundry is hosting its annual Users' Meeting - a nanoscience conference at Lawrence Berkeley National Lab - on August 11-12, 2016. The Molecular Foundry is a Department of Energy user facility for academic, national laboratory and industrial researchers. Whether you are a returning user, a prospective

  4. User Survey | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Survey User Survey Results The ALCF conducts yearly surveys to gain a better understanding of how we can improve the user experience at ALCF. Below are the numeric results of these surveys. 2014 ALCF User Survey Results 2013 ALCF User Survey Results 2012 ALCF User Survey Results 2011 ALCF User Survey Results 2010 ALCF User Survey Results 2009 ALCF User Survey Results 2008 ALCF User Survey Results

  5. APS User News | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Calendars Users Home APS User News User Announcements Proposal Deadlines and Related Meetings Conferences and Workshops APS Seminars and Meetings APS Committees and Reviews...

  6. User Financial Accounts | Linac Coherent Light Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Financial Accounts Why Have a User Financial Account? Each user group should establish a user financial account to procure gases, chemicals, supplies or services to support their ...

  7. User Financial Accounts | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Financial Accounts Why Have a User Financial Account? Each user group should establish a user financial account to procure gases, chemicals, supplies or services to support your ...

  8. STOMP Subsurface Transport Over Multiple Phases: User`s guide

    SciTech Connect (OSTI)

    White, M.D.; Oostrom, M.

    1997-10-01

    The U.S. Department of Energy, through the Office of Technology Development, has requested the demonstration of remediation technologies for the cleanup of volatile organic compounds and associated radionuclides within the soil and groundwater at arid sites. This demonstration program, called the VOC-Arid Soils Integrated Demonstration Program (Arid-ID), has been initially directed at a volume of unsaturated and saturated soil contaminated with carbon tetrachloride, on the Hanford Site near Richland, Washington. A principal subtask of the Arid-ID program involves the development of an integrated engineering simulator for evaluating the effectiveness and efficiency of various remediation technologies. The engineering simulator`s intended users include scientists and engineers who are investigating soil physics phenomena associated with remediation technologies. Principal design goals for the engineer simulator include broad applicability, verified algorithms, quality assurance controls, and validated simulations against laboratory and field-scale experiments. An important goal for the simulator development subtask involves the ability to scale laboratory and field-scale experiments to full-scale remediation technologies, and to transfer acquired technology to other arid sites. The STOMP (Subsurface Transport Over Multiple Phases) simulator has been developed by the Pacific Northwest National Laboratory for modeling remediation technologies. Information on the use, application, and theoretical basis of the STOMP simulator theory and discussions on the governing equations, constitutive relations, and numerical solution algorithms for the STOMP simulator.

  9. New Users - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Users Welcome! Congratulations on getting your experiment approved and scheduled at the 88-Inch Cyclotron. This section details how to register with LBNL, acquire gate access and parking, and take the required safety courses to run an experiment at the 88-Inch Cyclotron. 6 Weeks Ahead Set up a user agreement between your organization and LBNL, if there is not already one in place. Recharge customers (those who pay for beam time) must have a user agreement, purchase order, and an advance

  10. User Facilities Expert Team - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IMG_2298.JPG User Facilities Expert Team Research Why Solar Fuels Goals & Objectives Thrust 1 Thrust 2 Thrust 3 Thrust 4 Publications Research Highlights Videos Innovations User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS Spectral Database Research Introduction Why Solar Fuels? Goals & Objectives Thrusts Thrust 1 Thrust 2 Thrust 3 Thrust 4 Library Publications Research Highlights Videos Resources User Facilities Expert Team Benchmarking Database Device

  11. LANSCE | Users | LUG | Election Ballot

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Executive Committee Election Polls are now open! Polls close on Monday, April 4, 2016. The Executive Committee of the LANSCE User Group (LUG-EC) is seeking new representatives to serve on the Executive Committee beginning CY 2016. The LUG-EC meets onsite at LANSCE annually and engages in monthly teleconferences with LANSCE Management and User Program representatives on behalf of you, the User Community. Further information about the EC and current members can be found on the LUG EC page. Please

  12. LANSCE | Users | LUG | LUG EC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LUG 2014 Summary and Charge LANSCE User Group Executive Committee Onsite Meeting, March 2014 Summary On March 14th, 2014, the LANSCE user group executive committee (LUG-EC) convened a meeting with representatives from LANSCE management, and the management of each represented user facility - Weapons Neutron Research / Nuclear Science (WNR), Ultracold Neutrons (UCN), Proton Radiography (pRad), Isotope Production Facility (IPF), and the Lujan Neutron Scattering Center (Lujan Center). Each facility

  13. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 ALS User Meeting Awards Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User Meeting. David A. Shirley Award for Outstanding Scientific Achievement at the ALS shirley award The David A. Shirley Award for Scientific Achievement went to, from left, Carl Percival (University of Manchester), Dudley Shallcross [(University of Bristol) not pictured], and Craig Taatjes and David Osborn (Sandia), for making the first

  14. Office of Science User Facilities

    Broader source: Energy.gov [DOE]

    This presentation summarizes the information on the Office of Science User Facilities, which was given during the webinar on the DOE BRIDGE funding opportunity.

  15. Jefferson Lab Users Group News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User InformationRegistration print version UG Resources Background & Purpose By Laws Board of Directors Board of Directors Meetings Directory of Members Events At-A-Glance Member...

  16. Setting Up Your User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Setting Up Your User Environment Setting Up Your User Environment PDSF Defined Environment When new users are added to the PDSF machines, the login shell is set according to the user's request. You can choose between csh, tcsh, or bash. You can change your startup shell by logging into NIM. Paths and environment variables are controlled by startup files (also known as dot files). On PDSF the startup files are symbolic links to read-only files that NERSC controls (if they are not, see the

  17. April 2013 CNMS User Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    our understanding of nanoscale phenomena and develop functional nanomaterials systems. Access is provided at no cost to users for research that is in the public do- main and...

  18. 2009 PDSF Users Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    122209 Attending: Eric and Jay from PDSF and users Andrei, Marjorie, and Jeff P. Cluster status: Utilization has been relatively light, mostly STAR and some ATLASUCI jobs....

  19. NERSC User Group Meeting 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Large-Scale Structure experiments (DESDESILSST Euclid) will probe the nature of Dark Energy NERSC User Group Meeting 2014 CMB Satellite Missions Since COBE, the race has been ...

  20. APS User News, Issue 88

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -- John Rogers to be Keynote at Users Meeting -- 2015 APS Compton Award goes to Ice, Larson, and Sparks BRIEFLY NOTED -- Congratulations to Daniel Haskel, Winner of the 2015...

  1. User Facility | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Laboratory is a premier user facility providing world-class expertise, instrumentation and infrastructure for interdisciplinary nanoscience and nanotechnology research....

  2. AMBER User's Manual

    SciTech Connect (OSTI)

    Vay, J.L.; Fawley, W.

    2000-11-08

    AMBER is a Particle-In-Cell (PIC) code which models the evolution of a representative slice of a relativistic electron beam in a linear accelerator. The beam is modeled as a steady flow and therefore no electromagnetic waves: all the fields (external and self-fields) are electrostatic and magnetostatic fields (for a complete description, see chapter 5). The possible elements describing the accelerator lattice are solenoids, accelerating gaps, pipes and apertures. Several kinds of beam distribution can be loaded: KV, gaussian, semi-gaussian, etc. Alternatively, the user can reconstruct (or load) a distribution from the output of another codefile, for example, an interface generating the beam distribution from output produced from EGUN or LSP codes is available as an option. This documentation first describes in detail the input files needed to run AMBER and the procedure to start the executable. The possible data files and graphical output are explained in the two following chapters. The last chapter describes the physics model and numerical techniques used. An example of input files and the result obtained with these inputs are also given in the Appendix.

  3. SOLDESIGN user's manual copyright

    SciTech Connect (OSTI)

    Pillsbury, R.D. Jr.

    1991-02-01

    SOLDESIGN is a general purpose program for calculating and plotting magnetic fields, Lorentz body forces, resistances and inductances for a system of coaxial uniform current density solenoidal elements. The program was originally written in 1980 and has been evolving ever since. SOLDESIGN can be used with either interactive (terminal) or file input. Output can be to the terminal or to a file. All input is free-field with comma or space separators. SOLDESIGN contains an interactive help feature that allows the user to examine documentation while executing the program. Input to the program consists of a sequence of word commands and numeric data. Initially, the geometry of the elements or coils is defined by specifying either the coordinates of one corner of the coil or the coil centroid, a symmetry parameter to allow certain reflections of the coil (e.g., a split pair), the radial and axial builds, and either the overall current density or the total ampere-turns (NI). A more general quadrilateral element is also available. If inductances or resistances are desired, the number of turns must be specified. Field, force, and inductance calculations also require the number of radial current sheets (or integration points). Work is underway to extend the field, force, and, possibly, inductances to non-coaxial solenoidal elements.

  4. National Library of Energy : User Account

    Office of Scientific and Technical Information (OSTI)

    Reset your password Enter either your User Name or Email Address to reset your password. User Name: Email Address: Go...

  5. JAZELLE users manual

    SciTech Connect (OSTI)

    Johnson, A.S.

    1990-04-01

    JAZELLE is a data management package, designed to provide facilities for data structure manipulation considerably more powerful than those provided by standard FORTRAN 77. Since JAZELLE is built on top of FORTRAN it cannot hope to provide the level of integration between program design and data structure typical of more modern languages, but by the use of data structure definitions (called TEMPLATES in JAZELLE jargon) and the power of MORTRAN macros, JAZELLE attempts to make the use and manipulation of data structures within programs as unobtrusive as possible.

  6. Presto 2.9 user's guide.

    SciTech Connect (OSTI)

    Jung, Joseph

    2008-05-01

    Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

  7. Presto 4.18 user's guide.

    SciTech Connect (OSTI)

    Spencer, Benjamin Whiting

    2010-09-01

    Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

  8. Vegetation Change Analysis User's Manual

    SciTech Connect (OSTI)

    D. J. Hansen; W. K. Ostler

    2002-10-01

    Approximately 70 percent of all U.S. military training lands are located in arid and semi-arid areas. Training activities in such areas frequently adversely affect vegetation, damaging plants and reducing the resilience of vegetation to recover once disturbed. Fugitive dust resulting from a loss of vegetation creates additional problems for human health, increasing accidents due to decreased visibility, and increasing maintenance costs for roads, vehicles, and equipment. Diagnostic techniques are needed to identify thresholds of sustainable military use. A cooperative effort among U.S. Department of Energy, U.S. Department of Defense, and selected university scientists was undertaken to focus on developing new techniques for monitoring and mitigating military impacts in arid lands. This manual focuses on the development of new monitoring techniques that have been implemented at Fort Irwin, California. New mitigation techniques are described in a separate companion manual. This User's Manual is designed to address diagnostic capabilities needed to distinguish between various degrees of sustainable and nonsustainable impacts due to military training and testing and habitat-disturbing activities in desert ecosystems. Techniques described here focus on the use of high-resolution imagery and the application of image-processing techniques developed primarily for medical research. A discussion is provided about the measurement of plant biomass and shrub canopy cover in arid. lands using conventional methods. Both semiquantitative methods and quantitative methods are discussed and reference to current literature is provided. A background about the use of digital imagery to measure vegetation is presented.

  9. User Facilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Photon Source Argonne Leadership Computing Facility Argonne Tandem Linear Accelerator System Center for Nanoscale Materials Transportation Research and Analysis Computing Center Science Work with Argonne About Safety News Careers Education Community Diversity Directory Argonne National Laboratory About Safety News Careers Education Community Diversity Directory Energy Environment Security User Facilities Science Work with Argonne User Facilities Advanced Photon Source Argonne

  10. Annual Users Training Meeting Archives | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Annual Users Training Meeting Archives 2011 Users Training Meeting 2010 Users Training Meeting 2009 Users Training Meeting 2008 Users Training Meeting 2007 Users Training Meeting 2006 Users Training Meeting 2005 Users Training Meeting Learn More 2005 NMMSS Users Training Meeting 2006 NMMSS Users Training Meeting 2007 NMMSS Users Training Meeting 2008 NMMSS Users Training Meeting 2009 NMMSS Users Training Meeting 2010 NMMSS Users Training Meeting 2011 NMMSS Users

  11. Official List of SC User Facilities | U.S. DOE Office of Science...

    Office of Science (SC) Website

    On March 19, 2015 the Accelerator Test Facility was designated an Office of Science user facility and the National Synchrotron Light Source II entered operating status with a ...

  12. David Turner! NERSC User Services Group NERSC User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Environment --- 1 --- September 10, 2013 Overview * Login N odes, F ile S ystems, a nd D ot F iles - David T urner * So;ware M odules - Doug J acobsen * Compilers - Mike S ...

  13. CPLOAS_2 user manual

    SciTech Connect (OSTI)

    Sallaberry, Cedric Jean-Marie.; Helton, Jon Craig

    2012-10-01

    Weak link (WL)/strong link (SL) systems are important parts of the overall operational design of high-consequence systems. In such designs, the SL system is very robust and is intended to permit operation of the entire system under, and only under, intended conditions. In contrast, the WL system is intended to fail in a predictable and irreversible manner under accident conditions and render the entire system inoperable before an accidental operation of the SL system. The likelihood that the WL system will fail to deactivate the entire system before the SL system fails (i.e., degrades into a configuration that could allow an accidental operation of the entire system) is referred to as probability of loss of assured safety (PLOAS). This report describes the Fortran 90 program CPLOAS_2 that implements the following representations for PLOAS for situations in which both link physical properties and link failure properties are time-dependent: (i) failure of all SLs before failure of any WL, (ii) failure of any SL before failure of any WL, (iii) failure of all SLs before failure of all WLs, and (iv) failure of any SL before failure of all WLs. The effects of aleatory uncertainty and epistemic uncertainty in the definition and numerical evaluation of PLOAS can be included in the calculations performed by CPLOAS_2.

  14. CPLOAS_2 User Manual.

    SciTech Connect (OSTI)

    Sallaberry, Cedric Jean-Marie; Helton, Jon C.

    2015-05-01

    Weak link (WL)/strong link (SL) systems are important parts of the overall operational design of high - consequence systems. In such designs, the SL system is very robust and is intended to permit operation of the entire system under, and only under, intended conditions. In contrast, the WL system is intended to fail in a predictable and irreversible manner under accident conditions and render the entire system inoperable before an accidental operation of the SL system. The likelihood that the WL system will fail to d eactivate the entire system before the SL system fails (i.e., degrades into a configuration that could allow an accidental operation of the entire system) is referred to as probability of loss of assured safety (PLOAS). This report describes the Fortran 90 program CPLOAS_2 that implements the following representations for PLOAS for situations in which both link physical properties and link failure properties are time - dependent: (i) failure of all SLs before failure of any WL, (ii) failure of any SL before f ailure of any WL, (iii) failure of all SLs before failure of all WLs, and (iv) failure of any SL before failure of all WLs. The effects of aleatory uncertainty and epistemic uncertainty in the definition and numerical evaluation of PLOAS can be included in the calculations performed by CPLOAS_2. Keywords: Aleatory uncertainty, CPLOAS_2, Epistemic uncertainty, Probability of loss of assured safety, Strong link, Uncertainty analysis, Weak link

  15. 2016 PDSF User Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Minutes 2016 PDSF User Meeting Minutes September 6 : next August 9 , [slides] Attending Jeff, Jochen,Yuen-Dat, Craig, Jerome (phone), Jan Decisions/suggestions PDSF batch: investigate increase of the queue size to 50k jobs reduce 6 interactive nodes to 3 monitor load & connectivity per node inform users about intended limits of use of interactive nodes prepare to tag& kill jobs from users exceeding the limits, to be implemented in a month proceed with dedicated Shifter images for

  16. 2009 PDSF Users Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2009 PDSF Users Meeting Minutes December 22 PDSF Users Meeting 12/22/09 Attending: Eric and Jay from PDSF and users Andrei, Marjorie, and Jeff P. Cluster status: Utilization has been relatively light, mostly STAR and some ATLASUCI jobs. Outages: Discussed slowness caused by atlasusi jobs and the possibility of making /common read-only but no decision on how to do that was reached. The issue of using the NERSC global homes was also discussed as a possibility in the future. Upcoming downtimes:

  17. 2010 PDSF Users Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2010 PDSF Users Meeting Minutes December 21 PDSF Users Meeting 12/21/10 Attending: Eric and Jay from NERSC and users Andrei and Jeff P. Cluster status and utilization: Cluster has been loaded to capacity recently. STAR is running a lot of jobs, many of the grid-based and submitted from BNL. ALICE, ATLAS and icecube also running. Outages and Downtimes: There was an NGF downtime on the 16th, otherwise things have been stable for the most part. Procurements and New Hardware: Will get more storage

  18. Early Users to Test New Burst Buffer on Cori

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Early Users to Test New Burst Buffer on Cori Early Users to Test New Burst Buffer on Cori Designed to Accelerate I/O Performance October 5, 2015 Corimockup NERSC has selected a number of HPC research projects to participate in the center's new Burst Buffer Early User Program, where they will be able to test and run their codes using the new Burst Buffer feature on the center's newest supercomputer, Cori. Cori Phase 1, recently installed in the new Computational Research and Theory building at

  19. JEDI Marine and Hydrokinetic Model: User Reference Guide

    SciTech Connect (OSTI)

    Goldberg, M.; Previsic, M.

    2011-04-01

    The Jobs and Economic Development Impact Model (JEDI) for Marine and Hydrokinetics (MHK) is a user-friendly spreadsheet-based tool designed to demonstrate the economic impacts associated with developing and operating MHK power systems in the United States. The JEDI MHK User Reference Guide was developed to assist users in using and understanding the model. This guide provides information on the model's underlying methodology, as well as the sources and parameters used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted.

  20. GEOS. User Tutorials

    SciTech Connect (OSTI)

    Fu, Pengchen; Settgast, Randolph R.; Johnson, Scott M.; Walsh, Stuart D.C.; Morris, Joseph P.; Ryerson, Frederick J.

    2014-12-17

    GEOS is a massively parallel, multi-physics simulation application utilizing high performance computing (HPC) to address subsurface reservoir stimulation activities with the goal of optimizing current operations and evaluating innovative stimulation methods. GEOS enables coupling of di erent solvers associated with the various physical processes occurring during reservoir stimulation in unique and sophisticated ways, adapted to various geologic settings, materials and stimulation methods. Developed at the Lawrence Livermore National Laboratory (LLNL) as a part of a Laboratory-Directed Research and Development (LDRD) Strategic Initiative (SI) project, GEOS represents the culmination of a multi-year ongoing code development and improvement e ort that has leveraged existing code capabilities and sta expertise to design new computational geosciences software.

  1. HEATING 7. 1 user's manual

    SciTech Connect (OSTI)

    Childs, K.W.

    1991-07-01

    HEATING is a FORTRAN program designed to solve steady-state and/or transient heat conduction problems in one-, two-, or three- dimensional Cartesian, cylindrical, or spherical coordinates. A model may include multiple materials, and the thermal conductivity, density, and specific heat of each material may be both time- and temperature-dependent. The thermal conductivity may be anisotropic. Materials may undergo change of phase. Thermal properties of materials may be input or may be extracted from a material properties library. Heating generation rates may be dependent on time, temperature, and position, and boundary temperatures may be time- and position-dependent. The boundary conditions, which may be surface-to-boundary or surface-to-surface, may be specified temperatures or any combination of prescribed heat flux, forced convection, natural convection, and radiation. The boundary condition parameters may be time- and/or temperature-dependent. General graybody radiation problems may be modeled with user-defined factors for radiant exchange. The mesh spacing may be variable along each axis. HEATING is variably dimensioned and utilizes free-form input. Three steady-state solution techniques are available: point-successive-overrelaxation iterative method with extrapolation, direct-solution (for one-dimensional or two-dimensional problems), and conjugate gradient. Transient problems may be solved using one of several finite-difference schemes: Crank-Nicolson implicit, Classical Implicit Procedure (CIP), Classical Explicit Procedure (CEP), or Levy explicit method (which for some circumstances allows a time step greater than the CEP stability criterion). The solution of the system of equations arising from the implicit techniques is accomplished by point-successive-overrelaxation iteration and includes procedures to estimate the optimum acceleration parameter.

  2. User Experience Research and Statistics

    Broader source: Energy.gov [DOE]

    To improve your website or application, especially for new projects, EERE strongly recommends, but does not require, conducting user experience (UX) research. We only require that you get the...

  3. David Turner! User Services Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Group Accounts and Allocations --- 1 --- September 10, 2013 Accounts There a re t wo t ypes o f a ccounts a t N ERSC. 1. Your p ersonal, p rivate a ccount * ...

  4. Soybean (2010 JGI User Meeting)

    ScienceCinema (OSTI)

    Stacey, Gary

    2011-04-26

    Gary Stacey, associate director of the National Center for Soybean Biotechnology at the University of Missouri, gives a talk simply titled "Soybean" on March 24, 2010 at the 5th Annual DOE JGI User Meeting

  5. User Training | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Training Before performing work at the CNM, you must take certain orientation and safety training courses. We encourage you to take these courses remotely before you arrive at ...

  6. Proteus-SN user manual

    SciTech Connect (OSTI)

    Shemon, Emily R.; Smith, Micheal A.; Lee, Changho

    2015-07-31

    This user manual describes how to set up a neutron transport simulation with the PROTEUS-SN code. A companion methodology manual describes the theory and algorithms within PROTEUS-SN.

  7. User Experience Research Online Tools

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) has a variety of online tools to help you conduct user experience (UX) research. The following tools are free for use by staff and contractors who work on the EERE website.

  8. LANSCE | User Resources | Visitor Registration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visit Registration Users must register online at least: 4 weeks prior to experiment for U.S. citizens 2 months prior to experiment for foreign nationals. Lujan Center WNR Visit Registration Visit Registration

  9. Midwest Hydro Users Group Meeting

    Broader source: Energy.gov [DOE]

    The Midwest Hydro Users Group will be holding their annual Fall meeting on November 12th and 13th in Wausau, Wisconsin.  An Owners-only meeting on the afternoon of the 12th followed by a full...

  10. NuMAD User's Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (NuMAD v2.0) for Wind Turbine Blades: User's Guide Jonathan C. Berg Brian R. Resor Wind Energy Technologies Department Sandia National Laboratories P.O. Box 5800 Albuquerque, NM...

  11. 2014 User Meeting Award Recipients

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 User Meeting Award Recipients 2014 ALS User Meeting Award Recipients Presented on Tuesday, October 7, 2014, by Peter Nico (UEC Chair). David A. Shirley Award for Outstanding Scientific Achievement at the ALS The David A. Shirley Award for Scientific Achievement went to Chuck Fadley (UC Davis and Berkeley Lab), "For significant contributions to a better understanding of surfaces and interfaces through the development of novel x-ray photoemission spectroscopy techniques." David Shirley

  12. Monthly PDSF User Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PDSF Selected Announcements Email Announcements Archive PDSF Mailing Lists In Case of Difficulty Accessing PDSF or HPSS Cluster Statistics Getting help Group Pages PDSF Completed Jobs Obsolete (to be discarded) Genepool Queues and Scheduling Retired Systems Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help?

  13. 25th Annual Users' Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Registration Conference Schedule Poster Information Banquet Directions SSRLUO Ballot Lodging Information Travel to SLAC Visitor Information For Additional Information Contact: Michelle Steger steger@ssrl.slac.stanford.edu SSRL, MS 99 PO Box 4349 Stanford, CA 94309-0210 Phone: (650) 926-3011 Fax: (650) 926-3600 ALS Users' Conference: October 22-23 Graphics by Terry Anderson Last Update: September 11, 1998 Lisa Dunn, SSRL Stanford Synchrotron Radiation Laboratory 25th Annual Users' Conference

  14. Rad Toolbox User's Guide

    SciTech Connect (OSTI)

    Eckerman, Keith F.; Sjoreen, Andrea L.

    2013-05-01

    The Radiological Toolbox software developed by Oak Ridge National Laboratory (ORNL) for U. S. Nuclear Regulatory Commission (NRC) is designed to provide electronic access to the vast and varied data that underlies the field of radiation protection. These data represent physical, chemical, anatomical, physiological, and mathematical parameters detailed in various handbooks which a health physicist might consult while in his office. The initial motivation for the software was to serve the needs of the health physicist away from his office and without access to his handbooks; e.g., NRC inspectors. The earlier releases of the software were widely used and accepted around the world by not only practicing health physicist but also those within educational programs. This release updates the software to accommodate changes in Windows operating systems and, in some aspects, radiation protection. This release has been tested on Windows 7 and 8 and on 32- and 64-bit machines. The nuclear decay data has been updated and thermal neutron capture cross sections and cancer risk coefficients have been included. This document and the software’s user’s guide provide further details and documentation of the information captured within the Radiological Toolbox.

  15. SPi User Manual V0.1

    SciTech Connect (OSTI)

    Trimpl, M.; Yarema, R.; Newcomer, M.; Dressnandt, N.; Villani, G.; Weber, M.; Holt, R.; /Rutherford

    2011-05-01

    This document describes the Serial Powering Interface (SPi) ASIC. SPi is a general purpose ASIC prototype designed for use in serial powering of silicon detector instrumentation. This description is written as a user manual to aid application, not as a design description. SPi is a generic custom ASIC, manufactured in 0.25 {mu}m CMOS by TSMC, to interface between a constant current source and silicon detector read-out chips. There is no SEU (single event upset) protection, but most (not all) components are radiation tolerant design. An operating voltage of 1.2 to 2.5 volts and other design features make the IC suitable for a variety of serial powering architectures and ROICs. It should be noted that the device is likely to be a prototype for demonstration rather than a product for inclusion in a detector. The next design(s), SPin, are likely to be designed for a specific application (eg SLHC). The component includes: (1) Seven bi-directional LVDS-like buffers for high data rate links to/from the read-out chips. These are AC coupled (series capacitor) off-chip for DC level conversion; (2) A programmable internal programmable shunt regulator to provide a defined voltage to readout chips when linked in a serial powering chain; (3) A programmable internal shunt regulator control circuit for external transistor control; (4) Shunt current measurement (for internal shunt regulator); (5) A programmable internal shunt regulator current alarm; and (6) Two programmable linear regulators.

  16. User Safety | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Safety User Facilities User Facilities Home User Facilities at a Glance User Resources Getting Started User Safety Access Models User Agreements Data Management Resources Acknowledging User Facilities User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User Resources User Safety Print Text Size: A

  17. Help:User page | Open Energy Information

    Open Energy Info (EERE)

    User page Jump to: navigation, search A user page is a page about a wiki user; someone who registered on the wiki, and is (most probably) a contributor. If you have registered, you...

  18. SSRL Users' Organization | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Organization Charter | Committee Members | Committee Meetings | SSRLUO Activism SNUG Group Synchrotron and Neutron User's Group (SNUG) visit to Washington DC, April 2009. Left to right: Ryan Toomey, U. South Florida; Mark Dadmun, U. Tennessee; Christopher Kim, Chapman U. (SNUG Chair); Hendrik Ohldag, Stanford U. The SSRL Users' Organization (SSRLUO) is broadly concerned with representing the interests of the SSRL users (see Charter). Users elect members to serve on the Users' Executive

  19. NIF and Jupiter User Group Meeting 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    home / nif workshops / user group 2015 NIF and Jupiter User Group Meeting 2015 Information on the NIF User Facility About the NIF and Jupiter Laser Facility User Group Meeting The NIF and Jupiter Laser Facility (JLF) User Groups hosted a joint meeting from Sunday, February 8, 2015, through Wednesday, February 11, 2015, in Livermore, CA. The meeting described NIF's and JLF's capabilities to current and potential users and included presentations about capabilities and recent experiments. The

  20. Chemical and radiation stability of a proprietary cesium ion exchange material manufactured from WWL membrane and SuperLig{reg_sign} 644

    SciTech Connect (OSTI)

    Brown, G.N.; Carson, K.J.; DesChane, J.R.; Elovich, R.J.; Berry, P.K.

    1996-09-01

    Pretreatment of nuclear process wastes for ion exchange removal of Cs and other radionuclides is one way to minimize amount of high-level radioactive waste at Hanford. This study evaluated Cs-selective SuperLig{reg_sign}644 (IBC Advanced Technologies, American Fork UT) entrapped in a proprietary WWL web membrane (3M) for chemical/radiation stability in simulated caustic neutralized current acid waste (NCAW), 0.5M HNO{sub 3}, water, and air. After exposure up to 2.0E+09 rad, the material was evaluated for Cs uptake in 5M sodium NCAW simulants with varying Cs contents. Radiolytic stability appears to be sufficient for ion exchange pretreatment of radioactive Cs: essentially no decrease in Cs selectivity or loading (Kd) was observed during {sup 60}Cs gamma irradiation in water or 0.5M HNO{sub 3} up to 1.0E+09 rad. Cs Kd decreased by a factor of 2 after 2.0E+09 rad exposure. Cs Kd did not change during irradiation in 5M NCAW or ambient air up to 1.0E+08 rad, but decreased by more than an order of magnitude between 1.0E+08 and 2.0E+09 rad (not typical of process conditions). Chemical stability under caustic conditions is lower than in air or under neutral/acidic conditions. Results indicate that this material is less stable in caustic solution irrespective of radiation exposure. Samples of the membrane retained their physical form throughout the entire experiment and were only slightly brittle after exposure to 2.0E+09 rad. (The material evaluated was a finely ground (400 mesh) particulate engineered to form a polymeric fiber (WWL), not the macroscopic form of SuperLig{reg_sign} 644 resin (20 to 50 mesh).)

  1. SLAC Linac Coherent Light Source User Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Committees & Contacts LCLS Scientific Advisory Committee (SAC) LCLS Detector Advisory Committee (LDAC) LCLS Proposal Review Panel LCLS Users' Organization LCLS Collaborators User...

  2. User:Selena Miller | Open Energy Information

    Open Energy Info (EERE)

    User page Edit with form History User:Selena Miller Jump to: navigation, search 12.jpg Name Selena Miller Location Los Angeles, California Edits 2 Retrieved from "http:...

  3. Radiometer Calibration and Characterization (RCC) User's Manual...

    Office of Scientific and Technical Information (OSTI)

    (RCC) User's Manual: Windows Version 4.0 Citation Details In-Document Search Title: Radiometer Calibration and Characterization (RCC) User's Manual: Windows Version 4.0 ...

  4. JOBAID-APPROVE A USERS TRAINING REQUEST

    Broader source: Energy.gov [DOE]

    The purpose of this job aid is to guide users through the step-by-step process of approving a user training request.

  5. Users Executive Committee | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    provides advice to the Director on matters affecting the user community, and ensures good communication between the CNM user community and CNM management. The CNM UEC is also...

  6. User:Woodjr/Sandbox | Open Energy Information

    Open Energy Info (EERE)

    Sandbox < User:Woodjr Jump to: navigation, search Test link: Dataset 40 Retrieved from "http:en.openei.orgwindex.php?titleUser:WoodjrSandbox&oldid332192...

  7. Scott French! NERSC User Services Group! New User Training!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    French! NERSC User Services Group! ! New User Training! August 13, 2015 Computing Environment Node Types * Login nodes - Shared w ith o ther u sers - Code c ompila3on, j ob p repara3on a nd s ubmission * MOM n odes ( Cray m achines) - Shared w ith o ther u sers - Where b atch s cript e xecutes - Will g o a way w hen w e t ransi3on t o S LURM * Compute n odes - Not s hared ( except s erial q ueues) --- 2 --- Login Node Configuration * Edison - Twelve n odes * 16 c ores, 2 .0 G Hz I ntel S andy B

  8. Ankit Bhagatwala! NERSC User Services Group! New User Training!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ankit Bhagatwala! NERSC User Services Group! ! New User Training! March 21, 2016 Computing Environment Node Types * Login nodes - Shared w ith o ther u sers - Code c ompila3on, j ob p repara3on a nd s ubmission * Compute n odes - Not s hared ( except s hared q ueue o n C ori) * Service nodes - File s ystem a ccess ( lustre), d ata m ovement ( HPSS), network c onnec3ons t o o utside w orld, e tc. - Not a ccessed d irectly --- 2 --- Login Node Configuration * Edison - Twelve n odes * 16 c ores, 2

  9. Simion 3D Version 6.0 User`s Manual

    SciTech Connect (OSTI)

    Dahl, D.A.

    1995-11-01

    The original SIMION was an electrostatic lens analysis and design program developed by D.C. McGilvery at Latrobe University, Bundoora Victoria, Australia, 1977. SIMION for the PC, developed at the Idaho National Engineering Laboratory, shares little more than its name with the original McGilvery version. INEL`s fifth major SIMION release, version 6.0, represents a quantum improvement over previous versions. This C based program can model complex problems using an ion optics workbench that can hold up to 200 2D and/or 3D electrostatic/magnetic potential arrays. Arrays can have up to 10,000,000 points. SIMION 3D`s 32 bit virtual Graphics User Interface provides a highly interactive advanced user environment. All potential arrays are visualized as 3D objects that the user can cut away to inspect ion trajectories and potential energy surfaces. User programs have been greatly extended in versatility and power. A new geometry file option supports the definition of highly complex array geometry. Extensive algorithm modifications have dramatically improved this version`s computational speed and accuracy.

  10. David Turner! NERSC User Services Group! NUG New User Training...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NUG New User Training February 23, 2015 Next Steps You A re N ot A lone A c alcula'on o f t he s elf--- generated p lasma current i n t he W 7---X reactor, p erformed u sing the ...

  11. David Turner! NERSC User Services Group! New User Training!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New User Training October 30, 2014 Next Steps You A re N ot A lone A c alcula'on o f t he s elf--- generated p lasma current i n t he W 7---X reactor, p erformed u sing the S ...

  12. Early Edison Users Deliver Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Early Edison Users Deliver Results Early Edison Users Deliver Results January 31, 2014 Contact: Margie Wylie, mwylie@lbl.gov, +1 510 486 7421 Before any supercomputer is accepted at NERSC, scientists are invited to put the system through its paces during an "early science" phase. While the main aim of this period is to test the new system, many scientists are able to use the time to significantly advance their work. (»Related story: "Edison Electrifies Scientific

  13. 2015 User Meeting Award Recipients

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 User Meeting Award Recipients 2015 ALS User Meeting Award Recipients Presented on Tuesday, October 6, 2015, by Chris Cappa (UEC Chair). David A. Shirley Award for Outstanding Scientific Achievement at the ALS The David A. Shirley Award for Scientific Achievement went to Wanli Yang, "For new concepts optimizing battery materials with the aid of soft x-ray microscopy." David Shirley was a Professor of Chemistry at UC Berkeley and Director of LBNL from 1980 to 1989, and was instrumental

  14. LANSCE | User Resources | Experiment Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Experiment Reports For experiment report guidance, examples or a blank form, select one of the following .pdf files: Instructions.pdf Experiment Report Form.pdf Send reports to the LANSCE User Office. Reports are due three months after you receive beam time. If you didn't complete a User Survey during your visit, please do so when you complete your Experiment Report. The responses to the survey are used by LANSCE to identify and address issues and are also reported to the agencies providing

  15. E-Link - User Account

    Office of Scientific and Technical Information (OSTI)

    Energy Link (E-LINK) Access Request FOR DOE MAJOR SITE/FACILITY MANAGEMENT CONTRACTOR AND DOE HEADQUARTERS AND FIELD OFFICE PERSONNEL ONLY (Financial Assistance Recipients/Non-Major Site/Facility Management Contractors, go to www.osti.gov/elink-2413/) Major Site/Facility Management Contractors and DOE Headquarters and Field personnel are required to obtain a user name and password to access E-Link submissions and related reports. The process to obtain a user name and password also requires the

  16. PIA - Advanced Test Reactor National Scientific User Facility...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 (316.78 KB) More Documents & ...

  17. Number of NERSC Users and Projects Through the Years

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users and Projects Through the Years Careers Visitor Info Web Policies Home About Usage and User Demographics Users and Projects Through the Years Number of NERSC Users ...

  18. SSRL and LCLS Users' Meeting and Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SSRL and LCLS Users' Meeting and Workshops October 24-26, 2011 Menlo Park

  19. Commercial Building Energy Baseline Modeling Software: Performance Metrics and Method Testing with Open Source Models and Implications for Proprietary Software Testing

    SciTech Connect (OSTI)

    Price, Phillip N.; Granderson, Jessica; Sohn, Michael; Addy, Nathan; Jump, David

    2013-09-01

    The overarching goal of this work is to advance the capabilities of technology evaluators in evaluating the building-level baseline modeling capabilities of Energy Management and Information System (EMIS) software. Through their customer engagement platforms and products, EMIS software products have the potential to produce whole-building energy savings through multiple strategies: building system operation improvements, equipment efficiency upgrades and replacements, and inducement of behavioral change among the occupants and operations personnel. Some offerings may also automate the quantification of whole-building energy savings, relative to a baseline period, using empirical models that relate energy consumption to key influencing parameters, such as ambient weather conditions and building operation schedule. These automated baseline models can be used to streamline the whole-building measurement and verification (M&V) process, and therefore are of critical importance in the context of multi-measure whole-building focused utility efficiency programs. This report documents the findings of a study that was conducted to begin answering critical questions regarding quantification of savings at the whole-building level, and the use of automated and commercial software tools. To evaluate the modeling capabilities of EMIS software particular to the use case of whole-building savings estimation, four research questions were addressed: 1. What is a general methodology that can be used to evaluate baseline model performance, both in terms of a) overall robustness, and b) relative to other models? 2. How can that general methodology be applied to evaluate proprietary models that are embedded in commercial EMIS tools? How might one handle practical issues associated with data security, intellectual property, appropriate testing ‘blinds’, and large data sets? 3. How can buildings be pre-screened to identify those that are the most model-predictable, and therefore those

  20. Steve Leak! NERSC User Engagement Group! NUG New User Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leak! NERSC User Engagement Group! ! NUG New User Training NERSC File Systems and Data Management --- 1 --- March 2 1, 2 016 Topics * What fi lesystems a nd s torage d o w e h ave? - And h ow/when t o u se i t * How to share data with colleagues * How t o m ove d ata t o, f rom a nd a round N ERSC systems --- 2 --- Key Points * Variety o f s torage t ypes a vailable t o m eet d ifferent needs - Be a ware o f s trengths a nd l imita8ons o f e ach, u se e ach accordingly * BACK U P Y OUR I

  1. Synthetic Design Microorganisms for Lignin Fuels and Chemicals Presentation for BETO 2015 Project Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Synthetic Design Microorganisms for Lignin Fuels and Chemicals 3/26/2015 Synthetic Biology Joshua S. Yuan Associate Professor and Director Texas A&M University This presentation does contain proprietary information 1 Project Goal: Design of Microorganisms for Lignin Fuel * The proposed research aims to address one of the most challenging issues in biofuel production: the utilization of lignin for fungible fuels. * Project Outcome: A viable biological platform for conversion of lignin into

  2. User Resources | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Resources User Facilities User Facilities Home User Facilities at a Glance User Resources Getting Started User Safety Access Models User Agreements Data Management Resources Acknowledging User Facilities User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User Resources Print Text Size: A A A

  3. ARES: automated response function code. Users manual. [HPGAM and LSQVM

    SciTech Connect (OSTI)

    Maung, T.; Reynolds, G.M.

    1981-06-01

    This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

  4. System Design Stage

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-05-21

    This chapter addresses translating the user-oriented functional design specifications into a set of technical, computer-oriented system design specifications; and designing the data structure and processes to the level of detail necessary to plan and execute the Programming and Installation Stages.

  5. SOWFA + Super Controller User's Manual

    SciTech Connect (OSTI)

    Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

    2013-08-01

    SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

  6. Sierra Structural Dynamics User's Notes

    SciTech Connect (OSTI)

    Reese, Garth M.

    2015-10-19

    Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a users guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms.

  7. NIF User Group Executive Board

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    executive board NIF User Group Executive Board Professor Don Lamb (Chair) University of Chicago Professor Farhat Beg (Vice Chair) University of California, San Diego Professor Justin Wark (Past Chair) University of Oxford Dr. Riccardo Betti University of Rochester Dr. Kirk Flippo Los Alamos National Laboratory Professor Gianluca Gregori University of Oxford Professor Michel Koenig École Polytechnique Dr. Chikang Li Massachusetts Institute of Technology Dr. Jena Meinecke Young Researcher:

  8. atlasUserMeeting14

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GRETINA Mario Cromaz, LBNL Work supported under contract number DE-AC02-05CH11231. 2014 ATLAS User's Meeting ANL - May 15-16, 2014 The GRETINA Spectrometer 2 * first generation gamma-ray tracking array * spherical shell of Ge covering 25% of available solid angle (scalable to full 4 coverage) * consists of seven 4-crystal modules (quads), 36-way segmented HPGe crystals (1000 segments) * tracking ability removes need for active suppression, scales to very high efficiencies * physics runs now

  9. FNAL Users Meeting Morgan Wascko

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FNAL Users Meeting Morgan Wascko 3 June, 2004 LSU Slide 1 Quo Vadis, MiniBooNE? Context ν oscillation landscape LSND Implications What if the signal is confirmed? Latest MiniBooNE news Beam and Booster performance Detector performance calibration sources optical modeling of the oil detected neutrino rate vs. time Neutrino data flux, cross section progress Updated Oscillation Sensitivity based on measured neutrino rates during first year of data New physics? Many answers for many questions

  10. LANSCE | News | User Program Headlines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Program Headlines dotline Lujan Center: Material Science FY17 Call for Proposals Proposal Submission: https://www.lanl.gov/orgs/lansce/ Lujan Center Call for Proposals is Open. Deadline: May 21, 2016 at 5:00 pm (MDT). lansce.lanl.gov lansce.lanl.gov/lujan The Los Alamos Neutron Science Center (LANSCE) invites proposals for material science experiments at the Lujan Center addressing science of NNSA and LANL programmatic interest for the September 2016 - February 2017 run cycle. The Lujan

  11. 2013 PDSF User Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Minutes 2013 PDSF User Meeting Minutes December 3 Attending Shusu, Ernst, Mike, Craig, Iwona, Larry, Lisa Outages/Downtimes November 12 - 15: Mendel nodes offline for recabling Various Dates: Rolling upgrades of various PDSF interactive nodes Upcoming Downtimes January: Possible project outage December 16: Eliza 3, 8, 9 will no longer be accessible Other Issues New Mendel rack is in place, new interactives are open to a few beta testers. Amount of available scratch now tracked properly by

  12. 2012 LANSCE Topical User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 LANSCE Topical User Meeting January 9-10, 2012 The Office of Defense Programs is developing a long-term strategy for the construction of new experimental science facilities supporting NNSA missions. The new facilities will provide the critical science and technology capabilities necessary to execute the 21 st century responsibilities of NNSA in executing its mission and in supporting the broader national security agenda. The call focuses on large facilities with costs exceeding $100M. The NNSA

  13. EnergyPlus Graphical User Interface

    Energy Science and Technology Software Center (OSTI)

    2011-01-04

    LBNL, Infosys Technologies and Digital Alchemy are developing a free, comprehensive graphical user interface (GUI) that will enable EnergyPlus to be used more easily and effectively by building designers and other professionals, facilitating its widespread adoption. User requirements have been defined through a series of practitioner workshops. A new schematic editor for HVAC systems will be combined with different building envelope geometry generation tools and IFC-based BIM import and export. LBNL and Digital Alchemy havemore » generated a detailed function requirements specification, which is being implemented in software by Infosys, LBNL and and Digital Alchemy. LBNL and practitioner subcontractors will develop a comprehensive set of templates and libraries and will perform extensive testing of the GUI before it is released in Q3 2011. It is planned to use an Open Platfom approach, in which a comprehensive set of well documented Application Programming Interfaces (API's) would be provided to facilitate both the development of third party contributions to the official, standard GUI and the development of derivative works.« less

  14. SeisTool Ver. 2.1 User`s Guide

    SciTech Connect (OSTI)

    Yu, A.K.

    1993-08-01

    SeisTool is an interactive graphical tool that allows you to analyse seismograms. It runs under the X window environment. The current version employs an OpenLook graphical user interface. It is designed for convenient display of seismograms and handling of events for routine analysis. It also allows phase picking to be done smoothly. A number of time-series analysis operations have also been implemented. Here, is a brief guide to the operation of SeisTool. The intention of this User`s Guide is not to guide you through SeisTool step by step, (The best way of learning how to use SeisTool is run the program and experiment with it.) but, to present a few basic concepts behind SeisTool to acquaint you with the program. The goal of this prototype is to make analysing seismograms as easy and convenient as browsing a file with a text editor. Think of SeisTool as nothing more than a seismogram data file browser.

  15. LANSCE | About LANSCE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (NPUA; one usermany projects) Proprietary User Agreement (PUA; one userone project) Umbrella Proprietary User Agreement (UPUA; one usermany projects) Bilateral DOE Laboratory...

  16. User instructions for programs NEDIT and NPRED

    SciTech Connect (OSTI)

    Gross, R.J.

    1983-02-01

    NEDIT and NPRED are computer programs developed for the Strategic Petroleum Reserve (SPR) Program to assist the SPR system designers and operators in scheduling the leaching and oil-filling of the SPR salt caverns. NEDIT is an interactive program which assists the user in creating or editing a data set; NPRED in turn uses this data set to perform the engineering calculations. Various activities are necessary to achieve a man-made cavern filled with a maximum quantity of oil in minimum time. NPRED predicts the time required for each such activity, thus providing a site oil-capacity schedule. Instructions for using the codes are presented and examples are shown. 1 figure, 5 tables.

  17. Fan System Assessment Tool User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Manual Fan System Assessment Tool User Manual This user manual will help users understand how to use AMO's Fan System Assessment Tool. Fan System Assessment Tool User Manual ...

  18. Users Manual for the FEHMN application

    SciTech Connect (OSTI)

    Zyvoloski, G.A.; Robinson, B.A.; Dash, Z.V.; Trease, L.L.

    1996-09-01

    The user`s manual documents the use of the Yucca Mountain Site Characterization Projects Finite element heat and mass transfer code (FEHMN) application. The manual covers: Program considerations, data files, input data, output, system interface, and examples.

  19. NERSC Releases Mobile Apps to Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases Mobile Apps to Users NERSC Releases Mobile Apps to Users Job Status, MOTD and Pilot of VASP Submission Available with More to Come April 23, 2012 In an effort to make...

  20. Foreign Users | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Advance approval is required for users from Iran, Sudan or Syria. Foreign national users who were born in, are citizens of, or represent organizations from Iran, Sudan or Syria, ...

  1. User:Myenergy | Open Energy Information

    Open Energy Info (EERE)

    User page Edit with form History User:Myenergy Jump to: navigation, search Myenergy vertical styled.png Name MyEnergy Location Boston, Massachusetts Edits 4 MyEnergy is a leading...

  2. User:Joebloggs | Open Energy Information

    Open Energy Info (EERE)

    search Doofenshmirtz biteguard.png Name Joe Bloggs Location World Edits 3 This is a test user from someone on the OpenEI team. This user will simulate various spam to make sure...

  3. User:GregZiebold | Open Energy Information

    Open Energy Info (EERE)

    Energy Info Google Group Open Energy Info Twitter OpenEI YouTube Channel OpenEI Blog My test pages: User:GregZieboldGateway test User:GregZieboldSemantic Map test...

  4. User:Harris | Open Energy Information

    Open Energy Info (EERE)

    Harris Jump to: navigation, search Name harris Location Houston, Texas Edits 2 Friends User Edits DWC Bot 12006 Retrieved from "http:en.openei.orgwindex.php?titleUser:Harris&o...

  5. E-print Network : User Account

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Search | My Selections (0) | | | | Alerts | E-print Network Create User Account User Name: Email Address: I want to: Always receive emails Receive emails if there are new...

  6. MAMA- User Feedback and Training Summary

    SciTech Connect (OSTI)

    Porter, Reid B.; Ruggiero, Christy E.

    2014-05-21

    This document describes the current state of the MAMA (Morphological Analysis of Materials) software user identified bugs, issues, and requests for improvements. It also lists Current users and current training methods.

  7. User Access Program | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The PEB, an external panel of peer reviewers, evaluates CNM user proposals. PEB reviewers are directed to treat user proposals as confidential documents and to inform the CNM of ...

  8. Manufactured Home Energy Audit user`s manual

    SciTech Connect (OSTI)

    1997-09-01

    The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

  9. User:Mptonko | Open Energy Information

    Open Energy Info (EERE)

    Mptonko Jump to: navigation, search Edits 456 Retrieved from "http:en.openei.orgwindex.php?titleUser:Mptonko&oldid74785...

  10. User:Pgray | Open Energy Information

    Open Energy Info (EERE)

    Pgray Jump to: navigation, search Edits 203 Retrieved from "http:en.openei.orgwindex.php?titleUser:Pgray&oldid814210...

  11. User and Performance Impacts from Franklin Upgrades

    SciTech Connect (OSTI)

    He, Yun

    2009-05-10

    The NERSC flagship computer Cray XT4 system"Franklin" has gone through three major upgrades: quad core upgrade, CLE 2.1 upgrade, and IO upgrade, during the past year. In this paper, we will discuss the various aspects of the user impacts such as user access, user environment, and user issues etc from these upgrades. The performance impacts on the kernel benchmarks and selected application benchmarks will also be presented.

  12. User:Clarknd | Open Energy Information

    Open Energy Info (EERE)

    Clarknd Jump to: navigation, search Edits 1961 Retrieved from "http:en.openei.orgwindex.php?titleUser:Clarknd&oldid508286...

  13. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S

    Broader source: Energy.gov (indexed) [DOE]

    AT DESIGNATED NON-PROPRIETARY USER FACILITIES: DOE WAIVER NO. W(C)-2008-003. This Class Waiver is intended to provide for the disposition of intellectual property rights and...

  14. EMPHASIS/Nevada CABANA user Guide. Version 2.0.

    SciTech Connect (OSTI)

    Turner, C. David; Powell, Jennifer L.; Bohnhoff, William J.

    2011-09-01

    The CABle ANAlysis (CABANA) portion of the EMPHASIS{trademark} suite is designed specifically for the simulation of cable system-generated electromagnetic pulse (SGEMP). The code can be used to evaluate the response of a specific cable design to threat or to compare and minimize the relative response of difference designs. This document provides user-specific information to facilitate the application of the code to cables of interest. It solves the electrical portion of a cable SGEMP simulation. It takes specific results from the deterministic radiation-transport code CEPTRE as sources and computes the resulting electrical response to an arbitrary cable load. The cable geometry itself is also arbitrary and is limited only by the patience of the user in meshing and by the available computing resources for the solution. The CABANA simulation involves solution of the quasi-static Maxwell equations using finite-element method (FEM) techniques.

  15. Michael Stewart! NERSC User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Michael Stewart! NERSC User Services Compilers on NERSC Systems --- 1 --- September 10, 2013 Compilers on NERSC Systems Crays ( Hopper a nd E dison) PrgEnv m odules p rovide l inks t o M PI a nd m ath l ibrary l ibraries a nd includes. Invoke c ompilers w ith w rapper c ommands a nd t he l oaded PrgEnv m odule will i nvoke t he p roper c ompiler: ?n ( Fortran), c c ( C c ompiler), a nd C C ( C+ +). Available c ompiler m odules: pgi ( only o n H opper), i ntel, c ray, a nd g nu (gcc). Default

  16. Ahn-ANL_User_Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OPPORTUNITIES WITH THE PROTOTYPE AT-TPC AT ATLAS Tan Ahn! National Superconducting Cyclotron Lab, Michigan State University! ! Single-Particle Structure and Reactions Session! ATLAS Users Meeting! May 15, 2014 PROTOTYPE AT-TPC e - e - e - e - e - e - e - e - e - e - e - e - D. Suzuki et al., NIM A 660, 64 (2011) PROTOTYPE AT-TPC e - e - e - e - e - e - e - e - e - e - e - e - active-target volume D. Suzuki et al., NIM A 660, 64 (2011) PROTOTYPE AT-TPC e - e - e - e - e - e - e - e - e - e - e -

  17. 2014 PDSF User Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Minutes 2014 PDSF User Meeting Minutes December 2 Attending Jeff Outages / Downtimes 11/11 NERSC / PDSF maintenance 11/18 project hours Upcoming Downtime None Other Issues New Mendel nodes are online. Slides The slides from the meeting can be found here. November 4 Attending Jeff, Mike Outages / Downtime 10/20 NERSC CA and NEWT outage Upcoming Downtime 11/11 8:00 am to 6:00 pm maintenance Other Issues PDSF old home hardware is being retired. Please check your scripts for "/home" or

  18. 2015 PDSF User Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Minutes 2015 PDSF User Meeting Minutes January 6 Attending Jeff, Craig, Ernst, Lisa Outages/Downtimes None Upcoming Downtimes February 11 all day maintenance Other Issues Would like to retire SL53, please let Lisa know who's still using it and what's needed in SL6x. Slides You can find the slides shown at the meeting here. February 3 Attending Mike, Jeff, Lisa Outages/Downtimes 1/13: pdsfdtn2 maintenance 1/20: Power sag caused several nodes to lose GPFS, jobs failed 1/22: Global homes and

  19. User's guide to DOE facilities

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    The Department of Energy's research laboratories represent valuable, often unique, resources for university and industrial scientists. It is DOE policy to make these laboratories and facilities available to qualified scientists. The answers to such questions as who are eligible, what and where are the facilities, what is the cost, when can they be used, are given. Data sheets are presented for each facility to provide information such as location, user contact, description of research, etc. A subject index refers to areas of research and equipment available.

  20. 2011 PDSF Users Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2011 PDSF Users Meeting Minutes December 20 Attending: Eric Larry Iwona Mike Alex Hiroshi JeffP Lisa December 6 Attending: Eric, Iwona, Mike, Larry, Lisa November 22 Attending: Eric Iwona Mike Larry Lisa JeffP Ernst November 8 Attending: Eric Iwona JeffP JeffA Mike Craig October 25 Attending: Eric Marjorie Lisa Elizabeth October 11 Attending: Eric Mike Larry Iwona JeffA September 27 Attending: Eric Elizabeth, Larry, Lisa, JeffP, JeffA, Craig, Iwona, Mike September 13 Attending: Eric, Larry,

  1. 2012 PDSF Users Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 PDSF Users Meeting Minutes June 19 Attending: Larry, Katie, Craig, Mike Hence, Jay, Ernst Read More » June 5 Attending: Larry, Katie, Craig, Mike Hence, Jay, Ernst Read More » May 22 Attending: Larry, Katie, Craig, Mike Hence, Jay, Ernst Read More » May 8 Attending: Eric Iwona Ernst Mike Lisa JeffP Larry Read More » April 24 Attending: Eric, Iwona, Chris Powell, Clayton, Mike, Lisa Read More » April 10 Attending: Eric Iwona Larry Evan JeffP Lisa Tom Mike Gene Read More » March 27

  2. 26th Annual Users' Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    99users_conf.jpg (48161 bytes) registration_button.jpg (2015 bytes) program_button.jpg (1761 bytes) poster_button.jpg (1838 bytes) lytle_award.jpg ballot_button.jpg (2231 bytes) lodging_button.jpg (1708 bytes) directions_button.jpg (2196 bytes) visitor_button.jpg (1800 bytes) For Additional Information Contact: Michelle Steger steger.gif (1133 bytes) SSRL, MS 99 PO Box 4349 Stanford, CA 94309-0210 Phone: (650) 926-3011 Fax: (650) 926-3600 Last Update: August 3, 1999 by Lisa Dunn Image16.gif (32

  3. EMC User Safety | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Policies Safety at Work EMC User Safety Scheduled Maintenance Periods Transportation For Industrial Users Acknowledgment Statements for Publications End of Experiment Survey Users Executive Committee People Publications 2015 Publications 2014 Publications 2013 Publications 2012 Publications 2011 Publications 2010 Publications 2009 Publications 2008 Publications 2007 Publications 2006 Publications Fact Sheets & Other Documents Acknowledgment Statement News & Events RESEARCH

  4. 2012 PATRIOT SCRIPT User's Guide

    SciTech Connect (OSTI)

    Cuellar, Leticia; Cleland, Timothy J.; Kubicek, Deborah A.; Mathis, Mark M.; Stroud, Phillip D.

    2012-05-31

    PATRIOT Script is an application that executes Patriot batch runs. This document provides a description of this application and how to run it. The basic user access tool PATRIOT Client allows a user to generate several most reliable paths in one run: one can specify a list of sources (origins) and targets, and PATRIOT finds for a given architecture option and one choice of device all the most reliable paths between all these sources and targets. The main objective of PATRIOT Script is to provide a tool for making automatic PATRIOT runs not only for a prespecified set of sources and targets, but also for a pre-specified set of devices and various architecture options. Running PATRIOT Script requires two basic steps that will be explained in more detail next: (1) Pre-preparation of an excel spreadsheet with the information about the desired runs; and (2) Opening the PATRIOT Script application, reading in the excel-spreadsheet and running the desired scenarios. Sections 1 and 2 explain each of these steps, and section 3 describes the output of the PATRIOT Script. For a detail description of the models and data behind PATRIOT and a detailed explanation of all the architecture options see [1]. For instructions of how to run PATRIOT Client see [2].

  5. DOE national user facility in the Tropical Western Pacific.

    SciTech Connect (OSTI)

    Jones, L. A.; Porch, W. M.; Sisterson, Doug L.; Mather, J. H.; Long, C. N.

    2004-01-01

    In July 2003, the Department of Energy's Office of Biological and Environmental Research designated the Atmospheric Radiation Measurement sites as National User Facilities and renamed them the ARM Climate Research Facility (ACRF). As a result, the former ARM Cloud and Radiation Test bed (CART) sites are now collectively called Climate Research Sites. Part of the conditions associated with funding for ACRF is that the ARM program must attract new users. Located in Australia, and the island nations of Papua New Guinea and the Republic of Nauru, the three Tropical Western Pacific (TWP) research facilities offer unique scientific opportunities to prospective users. Although the locations of the facilities pose significant logistical challenges, particularly the two island sites, the TWP Office addresses these issues so that prospective users can focus on their research. The TWP Office oversees the operation of these sites by collaborating with the governments of Australia, Papua New Guinea, and the Republic of Nauru. Local observers are trained to effectively operate and maintain the facilities, and the state-side TWP Office offers supporting resources including daily instrument monitoring; equipment shipping, inventory tracking; customs coordination; and a readily deployable technical maintenance team at relatively minimal cost to prospective users. Satellite communications allow continuous, near-real time data from all three stations. The TWP Office also works diligently to maintain good local government and community relations with active outreach programs. This paper presents the TWP research facilities as the valuable resources they are to the scientific community.

  6. NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users Learn Code Optimization Tips and Tricks at 1st Hackathon NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon March 6, 2015 A one-day "Hack-A-Thon" held February 25 at NERSC's Oakland Scientific Facility during the annual NERSC Users Group (NUG) meeting has been deemed a rousing success by organizers and attendees alike. The event was designed to give users the opportunity to optimize a computationally intensive piece of code-either their own or a sample kernel

  7. Breckinridge Project, initial effort. Report XI, Volume III. Critical design areas. [Identification of critical design areas; design or materials problems, trade-off areas, items affecting operability and reliability

    SciTech Connect (OSTI)

    1982-01-01

    Several meetings have been held with representatives from Ashland Synthetic Fuels, Inc.; Airco Energy Company, Inc.; Bechtel Group, Inc.; and HRI Engineering, Inc. to identify critical design areas in the Phase Zero work. (Critical design areas are defined as those requiring additional data or further work to finalize design or material selection, to optimize the trade-off between capital investment and operating cost, or to enhance system operability and reliability.) The critical design areas so identified are summarized by plant in this volume of Report XI. Items of a proprietary nature have been omitted from this report, but are included in the limited access version.

  8. Call for General User Proposals - Upcoming Deadline

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Call for General User Proposals - Upcoming Deadline Call for General User Proposals - Upcoming Deadline Print The User Office is accepting new General User Proposals (GUPs) from scientists who wish to conduct research at the ALS in the 2016-2 July-Dec cycle. PROPOSAL SUBMISSION DEADLINE: March 2, 2016 Please log in to ALSHub to submit a new GUP or to make a Beam Time Request (BTR) on an existing active proposal. Users are reminded that they need to have an ALSHub account to submit proposals, and

  9. 2016-06-pdsf-user-meet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -06-07 PDSF Users Meeting 1 PDSF Users Meeting June 7, 2016 Jan Balewski 2016-06-07 PDSF Users Meeting Utilization 2 May 24 planned shut down 2016-06-07 PDSF Users Meeting Past/future outages 3 Past May 25 - NERSC quarterly shutdown Future June 11 - bldg 59 no power Impact: disabled pdsfNN login nodes reduce batch system capacity (Mendel is down) 2016-06-07 PDSF Users Meeting Announcements 4 Bi-weekly office hours in June * Wednesday, June 8, 2-4 pm , 59-3034-CR * Thursday, June 23, 2-4pm,

  10. Parallel community climate model: Description and user`s guide

    SciTech Connect (OSTI)

    Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H.

    1996-07-15

    This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

  11. Xyce parallel electronic simulator : users' guide.

    SciTech Connect (OSTI)

    Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.; Santarelli, Keith R.; Fixel, Deborah A.; Coffey, Todd Stirling; Russo, Thomas V.; Schiek, Richard Louis; Warrender, Christina E.; Keiter, Eric Richard; Pawlowski, Roger Patrick

    2011-05-01

    This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: (1) Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). Note that this includes support for most popular parallel and serial computers; (2) Improved performance for all numerical kernels (e.g., time integrator, nonlinear and linear solvers) through state-of-the-art algorithms and novel techniques. (3) Device models which are specifically tailored to meet Sandia's needs, including some radiation-aware devices (for Sandia users only); and (4) Object-oriented code design and implementation using modern coding practices that ensure that the Xyce Parallel Electronic Simulator will be maintainable and extensible far into the future. Xyce is a parallel code in the most general sense of the phrase - a message passing parallel implementation - which allows it to run efficiently on the widest possible number of computing platforms. These include serial, shared-memory and distributed-memory parallel as well as heterogeneous platforms. Careful attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows. The development of Xyce provides a platform for computational research and development aimed specifically at the needs of the Laboratory. With Xyce, Sandia has an 'in-house' capability with which both new electrical (e.g., device model development) and algorithmic (e.g., faster time-integration methods, parallel solver algorithms) research and development can be performed. As a result, Xyce is a unique

  12. User Statistics | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Statistics User Facilities User Facilities Home User Facilities at a Glance User Resources User Statistics By Institution By Project Data Archive User Statistics Collection Practices Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User Statistics Print Text Size: A A A FeedbackShare Page The Office of Science

  13. 2015 APS/CNM/EMC Users Meeting | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015 Users Meeting 2014 Users Meeting 2013 Users Meeting 2012 Users Meeting 2011 Users Meeting 2009 Users Meeting 2008 Users Meeting 2007 Users Meeting Workshops Photos Videos Career Opportunities CNM Intranet CNM on Facebook Career Opportunities CNM Intranet CNM on Facebook Argonne National Laboratory Center for Nanoscale Materials About Research Capabilities For Users People Publications News & Events News & Events RESEARCH HIGHLIGHTS COLLOQUIUM SERIES SEMINAR SERIES Argonne Press

  14. User manual for SPLASH (Single Panel Lamp and Shroud Helper).

    SciTech Connect (OSTI)

    Larsen, Marvin Elwood

    2006-02-01

    The radiant heat test facility develops test sets providing well-characterized thermal environments, often representing fires. Many of the components and procedures have become standardized to such an extent that the development of a specialized design tool to determine optimal configurations for radiant heat experiments was appropriate. SPLASH (Single Panel Lamp and Shroud Helper) is that tool. SPLASH is implemented as a user-friendly, Windows-based program that allows a designer to describe a test setup in terms of parameters such as number of lamps, power, position, and separation distance. This document is a user manual for that software. Any incidental descriptions of theory are only for the purpose of defining the model inputs. The theory for the underlying model is described in SAND2005-2947 (Ref. [1]). SPLASH provides a graphical user interface to define lamp panel and shroud designs parametrically, solves the resulting radiation enclosure problem for up to 2500 surfaces, and provides post-processing to facilitate understanding and documentation of analyzed designs.

  15. Department of Energy Designates the Idaho National Laboratory...

    Office of Environmental Management (EM)

    Designates the Idaho National Laboratory Advanced Test Reactor as a National Scientific User Facility Department of Energy Designates the Idaho National Laboratory Advanced Test ...

  16. Multidisciplinary Design of an Innovative Natural Draft, Forced Diffusion Cookstove for Woody and Herbaceous Biomass Fuels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multidisciplinary Design of an Innovative Natural Draft, Forced Diffusion Cookstove for Woody and Herbaceous Biomass Fuels March 26, 2015 Technology Area Review Principal Investigators: Jonathan Posner and John Kramlich University of Washington - Seattle This presentation does not contain any proprietary, confidential, or otherwise restricted information Goal Statement * Develop a natural draft cookstove that performs at the Tier 4 level for particulate matter, CO, efficiency, and safety that

  17. Improving Vehicle Fuel Efficiency Through Tire Design, Materials, and Reduced Weight

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Fuel Efficiency Through Tire Design, Materials, and Reduced Weight PI: Tim Donley Cooper Tire & Rubber Company June 19, 2014 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project ID: VSS083 Overview Timeline * Project start date: Oct. 1, 2011 * Project end date: Sept. 30, 2014 * Project complete: 85% Barriers 1) Cost / Premium Product 2) Manufacturability Budget * Total project funding: $3,679,309 - DOE share: $1,500,000 -

  18. Notification of General User Proposal and Approved Program Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notification of General User Proposal and Approved Program Results Notification of General User Proposal and Approved Program Results Print by Sue Bailey, User Services Group...

  19. V-093: Symantec PGP Desktop Buffer Overflows Let Local Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Secure Mobility Client Heap Overflow Lets Local Users Gain Elevated Privileges V-066: Adobe AcrobatReader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users...

  20. User Agreements | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Getting Started User Safety Access Models User Agreements Data Management Resources ... of intellectual property and data rights from the work undertaken at the user facility. ...

  1. Anaerobic digestion analysis model: User`s manual

    SciTech Connect (OSTI)

    Ruth, M.; Landucci, R.

    1994-08-01

    The Anaerobic Digestion Analysis Model (ADAM) has been developed to assist investigators in performing preliminary economic analyses of anaerobic digestion processes. The model, which runs under Microsoft Excel{trademark}, is capable of estimating the economic performance of several different waste digestion process configurations that are defined by the user through a series of option selections. The model can be used to predict required feedstock tipping fees, product selling prices, utility rates, and raw material unit costs. The model is intended to be used as a tool to perform preliminary economic estimates that could be used to carry out simple screening analyses. The model`s current parameters are based on engineering judgments and are not reflective of any existing process; therefore, they should be carefully evaluated and modified if necessary to reflect the process under consideration. The accuracy and level of uncertainty of the estimated capital investment and operating costs are dependent on the accuracy and level of uncertainty of the model`s input parameters. The underlying methodology is capable of producing results accurate to within {+-} 30% of actual costs.

  2. Profiling users in the UNIX os environment

    SciTech Connect (OSTI)

    Dao, V N P; Vemuri, R; Templeton, S J

    2000-09-29

    This paper presents results obtained by using a method of profiling a user based on the login host, the login time, the command set, and the command set execution time of the profiled user. It is assumed that the user is logging onto a UNIX host on a computer network. The paper concentrates on two areas: short-term and long-term profiling. In short-term profiling the focus is on profiling the user at a given session where user characteristics do not change much. In long-term profiling, the duration of observation is over a much longer period of time. The latter is more challenging because of a phenomenon called concept or profile drift. Profile drift occurs when a user logs onto a host for an extended period of time (over several sessions).

  3. FES User Facilities | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FES User Facilities User Facilities User Facilities Home User Facilities at a Glance All User Facilities ASCR User Facilities BES User Facilities BER User Facilities FES User Facilities HEP User Facilities NP User Facilities User Resources User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User

  4. ASCR User Facilities | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASCR User Facilities User Facilities User Facilities Home User Facilities at a Glance All User Facilities ASCR User Facilities BES User Facilities BER User Facilities FES User Facilities HEP User Facilities NP User Facilities User Resources User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User

  5. All User Facilities | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    All User Facilities User Facilities User Facilities Home User Facilities at a Glance All User Facilities ASCR User Facilities BES User Facilities BER User Facilities FES User Facilities HEP User Facilities NP User Facilities User Resources User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User

  6. HEP User Facilities | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HEP User Facilities User Facilities User Facilities Home User Facilities at a Glance All User Facilities ASCR User Facilities BES User Facilities BER User Facilities FES User Facilities HEP User Facilities NP User Facilities User Resources User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User

  7. MPSalsa a finite element computer program for reacting flow problems. Part 2 - user`s guide

    SciTech Connect (OSTI)

    Salinger, A.; Devine, K.; Hennigan, G.; Moffat, H.

    1996-09-01

    This manual describes the use of MPSalsa, an unstructured finite element (FE) code for solving chemically reacting flow problems on massively parallel computers. MPSalsa has been written to enable the rigorous modeling of the complex geometry and physics found in engineering systems that exhibit coupled fluid flow, heat transfer, mass transfer, and detailed reactions. In addition, considerable effort has been made to ensure that the code makes efficient use of the computational resources of massively parallel (MP), distributed memory architectures in a way that is nearly transparent to the user. The result is the ability to simultaneously model both three-dimensional geometries and flow as well as detailed reaction chemistry in a timely manner on MT computers, an ability we believe to be unique. MPSalsa has been designed to allow the experienced researcher considerable flexibility in modeling a system. Any combination of the momentum equations, energy balance, and an arbitrary number of species mass balances can be solved. The physical and transport properties can be specified as constants, as functions, or taken from the Chemkin library and associated database. Any of the standard set of boundary conditions and source terms can be adapted by writing user functions, for which templates and examples exist.

  8. Visual Sample Plan Version 7.0 User's Guide

    SciTech Connect (OSTI)

    Matzke, Brett D.; Newburn, Lisa LN; Hathaway, John E.; Bramer, Lisa M.; Wilson, John E.; Dowson, Scott T.; Sego, Landon H.; Pulsipher, Brent A.

    2014-03-01

    User's guide for VSP 7.0 This user's guide describes Visual Sample Plan (VSP) Version 7.0 and provides instructions for using the software. VSP selects the appropriate number and location of environmental samples to ensure that the results of statistical tests performed to provide input to risk decisions have the required confidence and performance. VSP Version 7.0 provides sample-size equations or algorithms needed by specific statistical tests appropriate for specific environmental sampling objectives. It also provides data quality assessment and statistical analysis functions to support evaluation of the data and determine whether the data support decisions regarding sites suspected of contamination. The easy-to-use program is highly visual and graphic. VSP runs on personal computers with Microsoft Windows operating systems (XP, Vista, Windows 7, and Windows 8). Designed primarily for project managers and users without expertise in statistics, VSP is applicable to two- and three-dimensional populations to be sampled (e.g., rooms and buildings, surface soil, a defined layer of subsurface soil, water bodies, and other similar applications) for studies of environmental quality. VSP is also applicable for designing sampling plans for assessing chem/rad/bio threat and hazard identification within rooms and buildings, and for designing geophysical surveys for unexploded ordnance (UXO) identification.

  9. NIF and Jupiter User Group Meeting 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    workshops / user group 2014 / NIF and Jupiter User Group Meeting 2014 About the NIF and Jupiter User Group Meeting The 192-beam National Ignition Facility (NIF), the most energetic inertial confinement fusion (ICF) facility in the world, is now operational. The NIF laser's unprecedented power, precision, and reproducibility, coupled with over 50 available diagnostics and sophisticated target fabrication capability, enable a wide range of leading edge scientific experiments. Initial experiments

  10. ORPS User Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Registration Form ORPS User Registration Form September 1, 2015 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System ORPS User Registration Form (486.14 KB) More Documents & Publications ORPS Facility Registration Form Occurrence Reporting and Processing System (ORPS) - PISA: TRU Waste Drums Containing Treated Nitrate Salts May Challenge the Safety Analysis Microsoft Word - CHAP02ESH _REVISED1_3.doc

  11. MAESTRO Beamline Set to Open to Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MAESTRO Beamline Set to Open to Users MAESTRO Beamline Set to Open to Users Print It was 10 years ago that ALS Senior Staff Scientist Eli Rotenberg devised the name Microscopic and Electronic STRucture Observatory, or MAESTRO, for his long-envisioned beamline dedicated to the determination of the electronic structure of materials at the mesoscopic length scale. This September, the beamline, 7.0.2, will accept general user proposals for the first time, offering researchers unparalleled

  12. User Data Forum and HPCOR Logistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Logistics User Data Forum and HPCOR Logistics Joint Facilities User Forum on Data Intensive Computing June 16-18, 2014 Oakland City Center Conference Center 500 12th Street, Suite 105 Oakland, CA DOE HPC Operations Review (HPCOR) June 17, 2014 (Joint with Joint Facilities User Forum on Data Intensive Computing) Oakland City Center Conference Center 500 12th Street, Suite 105 Oakland, CA June 18-19, 2014 California State University, East Bay Trans Bay Center 1000 Broadway, Suite 109 Oakland, CA

  13. Users: Scientists, Students & Postdocs | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users: Scientists, Students & Postdocs New User Checklist us citizen non-us-citizen An invitation letter is required at the port of entry for all non-U.S.citizens requesting a business visa (B-1, WB) to participate in research, workshops, conferences and meetings at Jefferson Lab. These activities are prohibited with tourist visa (B-2, WT) The User Liaison Office is available to assist all visiting scientists and students seeking ID badges, training, computer accounts and all other matters

  14. 27th Annual SSRL Users' Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Need more information? Contact the User Administration Office 27th Annual Stanford Synchrotron Radiation Laboratory Users' Meeting Stanford, California USA October 18-21, 2000 Meeting Chairs: Paul Foster (UC San Francisco) Jan Lüning (SSRL) The Stanford Synchrotron Radiation Laboratory (SSRL) Users' Meeting provides a forum for the presentation and discussion of recent developments and experimental results at SSRL or relating to synchrotron radiation sources. Surveys of these new developments

  15. New User and Data Analytics Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New User and Data Analytics Training New User and Data Analytics Training February 23, 2015 Monday, Feb. 23 - New User and Data Analytics Training NERSC (Berkeley Lab Building 943), 415 20th Street, Oakland, CA If you plan to attend, please register here. There is no registration fee, but your registration helps us plan the event. To attend remotely via WebEx, please see Remote Setup. Note that the morning session "New User Training" and the afternoon session "Data and Analytics

  16. User Shipments | Linac Coherent Light Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... stockpiling or use of a nuclear explosive device, chemical or biological weapons, or missiles; The user understands that SLAC will only return materials, samples and other items ...

  17. User Shipments | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... stockpiling or use of a nuclear explosive device, chemical or biological weapons, or missiles; the user understands that SLAC will only return materials, samples and other items ...

  18. User:Lkastler | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:Lkastler&oldid888618" Feedback Contact needs updating Image needs...

  19. User:Dbgrantham | Open Energy Information

    Open Energy Info (EERE)

    Dbgrantham Jump to: navigation, search Name dbgrantham Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:Dbgrantham&oldid2970...

  20. User:Angeliecook | Open Energy Information

    Open Energy Info (EERE)

    Angeliecook Jump to: navigation, search Name Angelie Cook Edits 2 Retrieved from "http:en.openei.orgwindex.php?titleUser:Angeliecook&oldid712575...

  1. User:Enaname | Open Energy Information

    Open Energy Info (EERE)

    Enaname Jump to: navigation, search Name ENANAME Location San Diego County, California Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:Enaname&oldid522220...

  2. User:Dflower | Open Energy Information

    Open Energy Info (EERE)

    Dflower Jump to: navigation, search Name Drew Flower Edits 5 ABCD Retrieved from "http:en.openei.orgwindex.php?titleUser:Dflower&oldid576860...

  3. User:Arondobos | Open Energy Information

    Open Energy Info (EERE)

    Arondobos Jump to: navigation, search Name Aron Dobos Location Denver, CO Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:Arondobos&oldid266766...

  4. User:WolfgangFahl | Open Energy Information

    Open Energy Info (EERE)

    WolfgangFahl Jump to: navigation, search Name Wolfgang Fahl Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:WolfgangFahl&oldid877450...

  5. User:Imasonaz | Open Energy Information

    Open Energy Info (EERE)

    Imasonaz Jump to: navigation, search Location Arizona Edits 74 Retrieved from "http:en.openei.orgwindex.php?titleUser:Imasonaz&oldid805916...

  6. User:Nmatin | Open Energy Information

    Open Energy Info (EERE)

    Nmatin Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleUser:Nmatin&oldid658628" Feedback Contact needs updating Image needs updating...

  7. Diatom Genomics (2009 JGI User Meeting)

    ScienceCinema (OSTI)

    Ambrust, Ginger

    2011-04-25

    Ginger Armbrust from the University of Washington spoke about diatom genomics on March 26, 2009 at the DOE JGI User Meeting

  8. APS User Information | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to APS, site access permission, user agreement, training, contactbio information your research: proposals, ESAFs, EEFs action items: things that need to be addressed before you...

  9. User:Dmulcahy | Open Energy Information

    Open Energy Info (EERE)

    Dmulcahy Jump to: navigation, search Name David Mulcahy Location Chapel Hill, North Carolina Edits 50 Friends User Edits ylin 14 Retrieved from "http:en.openei.orgw...

  10. Property:Tool Users | Open Energy Information

    Open Energy Info (EERE)

    "Tool Users" Showing 1 page using this property. N National Residential Efficiency Measures Database + The National Residential Efficiency Measures Database is a publicly...

  11. Advanced Notification of Awards (ANA) User Guide

    Energy Savers [EERE]

    a pop-up window with instructions appears as displayed below. The user selects the "OK" button to exit the instructions. Approving Notifications When there is pending award...

  12. Giselle Jiles and Angel Hernandez, User Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to visit, and birth announcements. "The users know that I have a weakness for chocolate," jokes Jiles. Hernandez describes his job as "culturally infusing" because of the...

  13. Diatom Genomics (2009 JGI User Meeting)

    SciTech Connect (OSTI)

    Ambrust, Ginger

    2009-03-26

    Ginger Armbrust from the University of Washington spoke about diatom genomics on March 26, 2009 at the DOE JGI User Meeting

  14. RTECS 1994 Public Use User's Guide

    U.S. Energy Information Administration (EIA) Indexed Site

    Banner 1994 RTECS Public Use Data User's Guide TABLE OF CONTENTS Survey Background 1994 RTECS Published Report How to Obtain Products and Services Printed Publications...

  15. User:Jamescook | Open Energy Information

    Open Energy Info (EERE)

    Jamescook Jump to: navigation, search Name James Cook Location Alabama Edits 6 Retrieved from "http:en.openei.orgwindex.php?titleUser:Jamescook&oldid795136...

  16. User:Psuwind | Open Energy Information

    Open Energy Info (EERE)

    Psuwind Jump to: navigation, search Name Pennsylvania Wind Application Center Location PA Edits 11 Retrieved from "http:en.openei.orgwindex.php?titleUser:Psuwind&oldid762655...

  17. Ocean Viral Metagenomics (2010 JGI User Meeting)

    ScienceCinema (OSTI)

    Rohwer, Forest

    2011-04-26

    Forest Rohwer from San Diego State University talks about "Ocean Viral Metagenomics" on March 25, 2010 at the 5th Annual DOE JGI User Meeting

  18. Pumping System Assessment Tool User Manual

    Broader source: Energy.gov [DOE]

    The Pumping System Assessment Tool (PSAT) user manual gives basic information about the data entry items, the calculated results, and assorted control button features.

  19. 2016-07-pdsf-user-meet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 12, 2016 Jan Balewski * PDSF performance * past/future outages * announcements * toward common PDSF Shifter image * PDSF interactive nodes * AOB PDSF Users Meeting Utilization 2 PDSF Users Meeting Past/future outages 3 Past NIM - unavailable last week due to critical bug Future HPSS: 07/13/16 9:00-13:00 PDT, Scheduled maintenance. PDSF Users Meeting Announcements 4 Bi-weekly office hours in June * Thursday, July 21, 2-4pm, 59-4016-CR PDSF users meeting * Tuesday, August 2, 11:15 - 12:15pm

  20. APS User Information | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    found the Office of Science SCGSR Program website. The Midwest Center for Sturctural Genomics is now accepting applications for access to the MCSG User Resource. MCSG's structure...

  1. User:Cookjj05 | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name Jeff Cook Location National Renewable Energy Laboratory Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:Cookjj05&oldid8...

  2. User:Abergfel | Open Energy Information

    Open Energy Info (EERE)

    Abergfel Jump to: navigation, search Edits 578 National Renewable Energies Laboratory Retrieved from "http:en.openei.orgwindex.php?titleUser:Abergfel&oldid643249...

  3. 2008/2009 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next 20082009 User Survey Results Table of Contents Response Survey Respondent Demographics Overall Satisfaction and Importance All Satisfaction and Importance Ratings...

  4. 2009/2010 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next 20092010 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction All Satisfaction and Importance Ratings HPC Resources NERSC...

  5. 2010/2011 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next 20102011 User Survey Results Table of Contents Response Summary Respondent Demographics Score Legend Satisfaction and Importance Scores HPC Resources Software Services...

  6. Heating 7.2 user`s manual

    SciTech Connect (OSTI)

    Childs, K.W.

    1993-02-01

    HEATING is a general-purpose conduction heat transfer program written in Fortran 77. HEATING can solve steady-state and/or transient heat conduction problems in one-, two-, or three-dimensional Cartesian, cylindrical, or spherical coordinates. A model may include multiple materials, and the thermal conductivity, density, and specific heat of each material may be both time- and temperature-dependent. The thermal conductivity may also be anisotropic. Materials may undergo change of phase. Thermal properties of materials may be input or may be extracted from a material properties library. Heat-generation rates may be dependent on time, temperature, and position, and boundary temperatures may be time- and position-dependent. The boundary conditions, which may be surface-to-environment or surface-to-surface, may be specified temperatures or any combination of prescribed heat flux, forced convection, natural convection, and radiation. The boundary condition parameters may be time- and/or temperature-dependent. General gray-body radiation problems may be modeled with user-defined factors for radiant exchange. The mesh spacing may be variable along each axis. HEATING uses a runtime memory allocation scheme to avoid having to recompile to match memory requirements for each specific problem. HEATING utilizes free-form input. Three steady-state solution techniques are available: point-successive-overrelaxation iterative method with extrapolation, direct-solution, and conjugate gradient. Transient problems may be solved using any one of several finite-difference schemes: Crank-Nicolson implicit, Classical Implicit Procedure (CIP), Classical Explicit Procedure (CEP), or Levy explicit method. The solution of the system of equations arising from the implicit techniques is accomplished by point-successive-overrelaxation iteration and includes procedures to estimate the optimum acceleration parameter.

  7. KAYENTA : theory and user's guide.

    SciTech Connect (OSTI)

    Brannon, Rebecca Moss; Fossum, Arlo Frederick; Strack, Otto Eric

    2009-03-01

    The physical foundations and domain of applicability of the Kayenta constitutive model are presented along with descriptions of the source code and user instructions. Kayenta, which is an outgrowth of the Sandia GeoModel, includes features and fitting functions appropriate to a broad class of materials including rocks, rock-like engineered materials (such as concretes and ceramics), and metals. Fundamentally, Kayenta is a computational framework for generalized plasticity models. As such, it includes a yield surface, but the term 'yield' is generalized to include any form of inelastic material response including microcrack growth and pore collapse. Kayenta supports optional anisotropic elasticity associated with ubiquitous joint sets. Kayenta supports optional deformation-induced anisotropy through kinematic hardening (in which the initially isotropic yield surface is permitted to translate in deviatoric stress space to model Bauschinger effects). The governing equations are otherwise isotropic. Because Kayenta is a unification and generalization of simpler models, it can be run using as few as 2 parameters (for linear elasticity) to as many as 40 material and control parameters in the exceptionally rare case when all features are used. For high-strain-rate applications, Kayenta supports rate dependence through an overstress model. Isotropic damage is modeled through loss of stiffness and strength.

  8. KAYENTA: Theory and User's Guide

    SciTech Connect (OSTI)

    Brannon, Rebecca Moss; Fuller, Timothy Jesse; Strack, Otto Eric; Fossum, Arlo Frederick; Sanchez, Jason James

    2015-02-01

    The physical foundations and domain of applicability of the Kayenta constitutive model are presented along with descriptions of the source code and user instructions. Kayenta, which is an outgrowth of the Sandia GeoModel, includes features and fitting functions appropriate to a broad class of materials including rocks, rock-like engineered materials (such as concretes and ceramics), and metals. Fundamentally, Kayenta is a computational framework for generalized plasticity models. As such, it includes a yield surface, but the term (3z(Byield(3y (Bis generalized to include any form of inelastic material response (including microcrack growth and pore collapse) that can result in non-recovered strain upon removal of loads on a material element. Kayenta supports optional anisotropic elasticity associated with joint sets, as well as optional deformation-induced anisotropy through kinematic hardening (in which the initially isotropic yield surface is permitted to translate in deviatoric stress space to model Bauschinger effects). The governing equations are otherwise isotropic. Because Kayenta is a unification and generalization of simpler models, it can be run using as few as 2 parameters (for linear elasticity) to as many as 40 material and control parameters in the exceptionally rare case when all features are used. For high-strain-rate applications, Kayenta supports rate dependence through an overstress model. Isotropic damage is modeled through loss of stiffness and strength.

  9. When soft controls get slippery: User interfaces and human error

    SciTech Connect (OSTI)

    Stubler, W.F.; O`Hara, J.M.

    1998-12-01

    Many types of products and systems that have traditionally featured physical control devices are now being designed with soft controls--input formats appearing on computer-based display devices and operated by a variety of input devices. A review of complex human-machine systems found that soft controls are particularly prone to some types of errors and may affect overall system performance and safety. This paper discusses the application of design approaches for reducing the likelihood of these errors and for enhancing usability, user satisfaction, and system performance and safety.

  10. Hiding the system from the user: Moving from complex mental models to elegant metaphors

    SciTech Connect (OSTI)

    Curtis W. Nielsen; David J. Bruemmer

    2007-08-01

    In previous work, increased complexity of robot behaviors and the accompanying interface design often led to operator confusion and/or a fight for control between the robot and operator. We believe the reason for the conflict was that the design of the interface and interactions presented too much of the underlying robot design model to the operator. Since the design model includes the implementation of sensors, behaviors, and sophisticated algorithms, the result was that the operators cognitive efforts were focused on understanding the design of the robot system as opposed to focusing on the task at hand. This paper illustrates how this very problem emerged at the INL and how the implementation of new metaphors for interaction has allowed us to hide the design model from the user and allow the user to focus more on the task at hand. Supporting the users focus on the task rather than on the design model allows increased use of the system and significant performance improvement in a search task with novice users.

  11. T-606: Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data

    Broader source: Energy.gov [DOE]

    Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data.

  12. Microsoft Word - LANS PUA_LANSCE template.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PROPRIETARY USER AGREEMENT The Department of Energy has opted to utilize the following agreement for Designated Proprietary User Facilities transactions. Because these transactions are widespread across Departmental facilities, uniformity in agreement terms is desirable. Except for the *** provisions, minor modifications to the terms of this agreement may be made by CONTRACTOR, but any changes to the *** provisions or substantive changes to the non *** provisions will require approval by the DOE

  13. UFO (UnFold Operator) user guide

    SciTech Connect (OSTI)

    Kissel, L.; Biggs, F. ); Marking, T.R. )

    1991-06-01

    UFO is a collection of interactive utility programs for estimating unknown functions of one variable using a wide-ranging class of information as input, for miscellaneous data-analysis applications, for performing feasibility studies, and for supplementing our other software. Inverse problems, which include spectral unfolds, inverse heat-transfer problems, time-domain deconvolution, and unusual or difficult curve-fit problems, are classes of applications for which UFO is well suited. Extensive use of B-splines and (X,Y)-datasets is made to represent functions. The (X,Y)-dataset representation is unique in that it is not restricted to equally-spaced data. This feature is used, for example, in a table-generating algorithm that evaluates a function to a user-specified interpolation accuracy while minimizing the number of points stored in the corresponding dataset. UFO offers a variety of miscellaneous data-analysis options such as plotting, comparing, transforming, scaling, integrating; and adding, subtracting, multiplying, and dividing functions together. These options are often needed as intermediate steps in analyzing and solving difficult inverse problems, but they also find frequent use in other applications. Statistical options are available to calculate goodness-of-fit to measurements, specify error bands on solutions, give confidence limits on calculated quantities, and to point out the statistical consequences of operations such as smoothing. UFO is designed to do feasibility studies on a variety of engineering measurements. It is also tailored to supplement our Test Analysis and Design codes, SRAD Test-Data Archive software, and Digital Signal Analysis routines.

  14. RT3D tutorials for GMS users

    SciTech Connect (OSTI)

    Clement, T.P.; Jones, N.L.

    1998-02-01

    RT3D (Reactive Transport in 3-Dimensions) is a computer code that solves coupled partial differential equations that describe reactive-flow and transport of multiple mobile and/or immobile species in a three dimensional saturated porous media. RT3D was developed from the single-species transport code, MT3D (DoD-1.5, 1997 version). As with MT3D, RT3D also uses the USGS groundwater flow model MODFLOW for computing spatial and temporal variations in groundwater head distribution. This report presents a set of tutorial problems that are designed to illustrate how RT3D simulations can be performed within the Department of Defense Groundwater Modeling System (GMS). GMS serves as a pre- and post-processing interface for RT3D. GMS can be used to define all the input files needed by RT3D code, and later the code can be launched from within GMS and run as a separate application. Once the RT3D simulation is completed, the solution can be imported to GMS for graphical post-processing. RT3D v1.0 supports several reaction packages that can be used for simulating different types of reactive contaminants. Each of the tutorials, described below, provides training on a different RT3D reaction package. Each reaction package has different input requirements, and the tutorials are designed to describe these differences. Furthermore, the tutorials illustrate the various options available in GMS for graphical post-processing of RT3D results. Users are strongly encouraged to complete the tutorials before attempting to use RT3D and GMS on a routine basis.

  15. Heating 7. 2 user's manual

    SciTech Connect (OSTI)

    Childs, K.W.

    1993-02-01

    HEATING is a general-purpose conduction heat transfer program written in Fortran 77. HEATING can solve steady-state and/or transient heat conduction problems in one-, two-, or three-dimensional Cartesian, cylindrical, or spherical coordinates. A model may include multiple materials, and the thermal conductivity, density, and specific heat of each material may be both time- and temperature-dependent. The thermal conductivity may also be anisotropic. Materials may undergo change of phase. Thermal properties of materials may be input or may be extracted from a material properties library. Heat-generation rates may be dependent on time, temperature, and position, and boundary temperatures may be time- and position-dependent. The boundary conditions, which may be surface-to-environment or surface-to-surface, may be specified temperatures or any combination of prescribed heat flux, forced convection, natural convection, and radiation. The boundary condition parameters may be time- and/or temperature-dependent. General gray-body radiation problems may be modeled with user-defined factors for radiant exchange. The mesh spacing may be variable along each axis. HEATING uses a runtime memory allocation scheme to avoid having to recompile to match memory requirements for each specific problem. HEATING utilizes free-form input. Three steady-state solution techniques are available: point-successive-overrelaxation iterative method with extrapolation, direct-solution, and conjugate gradient. Transient problems may be solved using any one of several finite-difference schemes: Crank-Nicolson implicit, Classical Implicit Procedure (CIP), Classical Explicit Procedure (CEP), or Levy explicit method. The solution of the system of equations arising from the implicit techniques is accomplished by point-successive-overrelaxation iteration and includes procedures to estimate the optimum acceleration parameter.

  16. 2006 XSD Scientific Software User Survey.

    SciTech Connect (OSTI)

    Jemian, P. R.

    2007-01-22

    In preparation for the 2006 XSD Scientific Software workshop, our committee sent a survey on June 16 to 100 users in the APS user community. This report contains the survey and the responses we received. The responses are presented in the order received.

  17. Builders and Users | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Builders and Users Constructing the National Spherical Torus Experiment Upgrade took years of detailed planning and oversight. The team in charge brought decades of experience to the task, working together to make the $94 million upgrade a reality. Publication File: PDF icon NSTX-U_presskit_print_Builders-Users

  18. Becoming a User | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Process in Brief Proposal Form Guidelines Preparing for Your Visit Working at CNM For Industrial Users Acknowledgment Statements for Publications End of Experiment Survey Users Executive Committee People Publications 2015 Publications 2014 Publications 2013 Publications 2012 Publications 2011 Publications 2010 Publications 2009 Publications 2008 Publications 2007 Publications 2006 Publications Fact Sheets & Other Documents Acknowledgment Statement News & Events RESEARCH

  19. User Facilities at a Glance | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilities at a Glance User Facilities User Facilities Home User Facilities at a Glance All User Facilities ASCR User Facilities BES User Facilities BER User Facilities FES User Facilities HEP User Facilities NP User Facilities User Resources User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User

  20. OVIS 3.2 user's guide.

    SciTech Connect (OSTI)

    Mayo, Jackson R.; Gentile, Ann C.; Brandt, James M.; Houf, Catherine A.; Thompson, David C.; Roe, Diana C.; Wong, Matthew H.; Pebay, Philippe Pierre

    2010-10-01

    This document describes how to obtain, install, use, and enjoy a better life with OVIS version 3.2. The OVIS project targets scalable, real-time analysis of very large data sets. We characterize the behaviors of elements and aggregations of elements (e.g., across space and time) in data sets in order to detect meaningful conditions and anomalous behaviors. We are particularly interested in determining anomalous behaviors that can be used as advance indicators of significant events of which notification can be made or upon which action can be taken or invoked. The OVIS open source tool (BSD license) is available for download at ovis.ca.sandia.gov. While we intend for it to support a variety of application domains, the OVIS tool was initially developed for, and continues to be primarily tuned for, the investigation of High Performance Compute (HPC) cluster system health. In this application it is intended to be both a system administrator tool for monitoring and a system engineer tool for exploring the system state in depth. OVIS 3.2 provides a variety of statistical tools for examining the behavior of elements in a cluster (e.g., nodes, racks) and associated resources (e.g., storage appliances and network switches). It provides an interactive 3-D physical view in which the cluster elements can be colored by raw or derived element values (e.g., temperatures, memory errors). The visual display allows the user to easily determine abnormal or outlier behaviors. Additionally, it provides search capabilities for certain scheduler logs. The OVIS capabilities were designed to be highly interactive - for example, the job search may drive an analysis which in turn may drive the user generation of a derived value which would then be examined on the physical display. The OVIS project envisions the capabilities of its tools applied to compute cluster monitoring. In the future, integration with the scheduler or resource manager will be included in a release to enable intelligent

  1. Innovative Cell Materials and Designs for 300 Mile Range EVs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovative Cell Materials and Design for 300 Mile Range EVs Yimin Zhu, PD/PI OneD Material, LLC (former Nanosys Energy Storage) Palo Alto, California June 16 ~20, 2014 DOE Vehicle Technologies AMR 2014 ES130_zhu_2014_p This presentation does not contain any proprietary, confidential, or otherwise restricted information TM * Barriers addressed - Performance: Low Wh/kg & Wh/L - Life: Poor deep discharge cycles - Cost: High $/kWh * Targets Anode: >700 mAh/g 1,600 mAh/g >800 cycles

  2. PETSc Users Manual Revision 3.4

    SciTech Connect (OSTI)

    Balay, S.; Brown, J.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Smith, B.; Zhang, H.

    2014-06-29

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because

  3. PETSc Users Manual Revision 3.3

    SciTech Connect (OSTI)

    Balay, S.; Brown, J.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Smith, B.; Zhang, H.

    2013-05-11

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because

  4. PETSc Users Manual Revision 3.5

    SciTech Connect (OSTI)

    Balay, S.; Abhyankar, S.; Adams, M.; Brown, J.; Brune, P.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Rupp, K.; Smith, B.; Zhang, H.

    2014-09-08

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself. ;For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because

  5. User's guide for ENVSTD24 program, Version 2. 4

    SciTech Connect (OSTI)

    Hanlon, R.L.; Connell, L.M.

    1993-05-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated an interim rule entitled [open quotes]Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings[close quotes] (10 CFR Part 435, Subpart A). These standards require federal agencies to design all future federal commercial and multifamily high-rise residential buildings in accordance with the standards, or demonstrate that their current requirements already meet or exceed the energy-efficiency requirements of the standards. Although these newly enacted standards do not regulate the design of nonfederal buildings, the DOE recommends that all design professionals use the standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the DOE published the standards in the January 30, 1989, Federal Register in the format typical of commercial standards. The Pacific Northwest Laboratory developed several computer programs for the DOE to make it easier for designers to comply with the standards. One of the programs, ENVSTD24 (Version 2.4), is detailed in this user's guide and is provided on the accompanying diskettes. The program will facilitate the designer's use of the standards dealing specifically with building envelope design. Using this program will greatly simplify the designer's task of performing the calculations needed to determine if a design complies with the standards.

  6. Workshop on user experience with gas-insulated substations

    SciTech Connect (OSTI)

    Graybill, H.W.

    1981-12-01

    There is widespread interest among American and Canadian utilities in the interchange of operating and maintenance experience with gas-insulated substations (GIS). Those utilities who do not yet have GIS on their systems are likewise interested in the operating experience of those who do. A two-day workshop on GIS was held in Portland, Oregon, on July 30 and 31, 1981. The first day of the workshop was open to users only, and the agenda for the day consisted of user presentations on the following subjects: GIS station design and layout; specification and acquisition of GIS equipment; installation and commissioning; and operation and maintenance. On the second day, manufacturers were invited to present their experience, status, and progress in recent developments and improvements. The session was concluded with a general discussion of experience, problems, etc. No formal written papers were presented. The highlights of each verbal presentation and of ensuing discussion are presented in this report.

  7. LCLS User Check-In Procedures | Linac Coherent Light Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Check-In Procedures Data Collection & Analysis | Policies | Proposals | Schedules | Shipping | User Portal Prior to traveleing to SLAC, review changes for badging/automated access and updated user check-in procedures: STEP 1. Register or Update User Portal. Provide or update your user information through the user portal (this must be completed prior to arrival). Ensure that you have correctly listed your current institution. If a user agreement with your institution is not executed in

  8. LCLS Users' Organization Executive Committee | Linac Coherent Light Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Organization Executive Committee SAVE THE DATE: SSRL/LCLS Users' Conference and Workshops, October 5-7, 2016 Read summary of 2015 users' conference. During the annual meeting, users also have the opportunity to vote for their Users Executive Committee Representatives. The LCLS Users' Organization (LCLS UO) provides an organized framework and independent vehicle for interaction between the scientists who are interested in using the Linac Coherent Light Source (the users) and LCLS/SLAC

  9. User Facilities | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilities User Facilities User Facilities Home User Facilities at a Glance User Resources User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 jpg image, 64221 bytes The undulator hall of the Linac Coherent Light Source (LCLS). (SLAC National Accelerator Laboratory) jpg image, 93797 bytes Silicon

  10. Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

    SciTech Connect (OSTI)

    Brant Peery; Sam Alessi; Randy Lee; Leng Vang; Scott Brown; David Solan; Dan Ames

    2014-06-01

    There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert data to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.

  11. New User Training: August 13, 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8/13/2015 New User Training: August 13, 2015 NERSC will present a day of training for new users on August 13, 2015 from 09:00 to 17:00 PDT. This event is targeted to new users of NERSC and will help them navigate the center and its systems. Location This event will be presented online using Zoom technology and in person at NERSC Oakland Scientific Facility. Please see below for remote connection information. Registration There is no registration for the online event. Please see below for remote

  12. New User Training: July 15, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training New User Training: July 15, 2014 July 15, 2014 NERSC will present a three-hour training for new users on July 15, 2014 from 09:00 to 12:00 PDT. This event is targeted to new users of NERSC and will help them navigate the center and its systems. Location This event will be presented online using WebEx technology and in person at NERSC Oakland Scientific Facility. Please see the remote setup page for connection information. Registration Attendance: 67 There is no registration for the

  13. New User Training: October 30, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10/30/2014 New User Training: October 30, 2014 October 30, 2014 NERSC will present a three-hour training for new users on October 30, 2014 from 09:00 to 12:00 PDT. This event is targeted to new users of NERSC and will help them navigate the center and its systems. Location This event will be presented online using WebEx technology and in person at NERSC Oakland Scientific Facility. Please see the remote setup page for connection information. Registration There is no registration for the online

  14. New User Training: Sep. 10, 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training New User Training: Sep. 10, 2013 September 10, 2013 NERSC will present a four-hour training for new users on Sep. 10, 2013 from 10:00 to 14:00 PDT. This event is targeted to new users of NERSC and will help them navigate the center and its systems. Attemdamce: 104 Location This event will be presented online using WebEx technology and in person at NERSC Oakland Scientific Facility. Please see the remote setup page for connection information. Registration There is no registration for the

  15. New User Guide | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] New User Guide ► USER TIP: View "Getting Started" --a video introduction to ALCF services and resources with useful tips to boost your job throughput. Step 1. Request an ALCF Project Step 2. Get an ALCF User Account Step 3. Logging in to an ALCF Resource Step 4. Setting Up Your Computing Environment Step 5. Data Step 6. How to Run a Job

  16. Assessment of User Home Location Geoinference Methods

    SciTech Connect (OSTI)

    Harrison, Joshua J.; Bell, Eric B.; Corley, Courtney D.; Dowling, Chase P.; Cowell, Andrew J.

    2015-05-29

    This study presents an assessment of multiple approaches to determine the home and/or other important locations to a Twitter user. In this study, we present a unique approach to the problem of geotagged data sparsity in social media when performing geoinferencing tasks. Given the sparsity of explicitly geotagged Twitter data, the ability to perform accurate and reliable user geolocation from a limited number of geotagged posts has proven to be quite useful. In our survey, we have achieved accuracy rates of over 86% in matching Twitter user profile locations with their inferred home locations derived from geotagged posts.

  17. Please take the 2011 user survey

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    take the 2011 user survey Please take the 2011 user survey June 6, 2011 by Francesca Verdier You are encouraged to take the 2011 user survey. Your answers are important to us and to our program sponsors in DOE. Subscribe via RSS Subscribe Browse by Date August 2016 June 2016 May 2016 April 2016 January 2016 December 2015 November 2015 October 2015 September 2015 August 2015 July 2015 April 2015 March 2015 January 2015 December 2014 November 2014 October 2014 August 2014 June 2014 May 2014 April

  18. National Energy AudiT (NEAT) user`s manual

    SciTech Connect (OSTI)

    Krigger, J.K.; Adams, N.; Gettings, M.

    1997-10-01

    Welcome to the US Department of Energy`s (DOE`s) energy auditing tool called ``NEAT``. NEAT, an acronym for National Energy AudiT, is a program for personal computers that was designed for use by local agencies in the Weatherization Assistance Program. It is an approved alternative audit that meets all auditing requirements set forth by the program as well as those anticipated from new regulations pertaining to waiver of the 40% materials requirements. NEAT is easy to use. It applies engineering and economic calculations to evaluate energy conservation measures for single-family, detached houses or small multifamily buildings. You can use it to rank measured for each individual house, or to establish a priority list of conservation measures for nearly identical housing types. NEAT was written for the Weatherization Assistance Program by Oak Ridge National Laboratory. Many buildings energy consumption algorithms are taken from Lawrence Berkeley Laboratory`s to the computerized Instrumented Residential Audit (CIRA), published in 1982 for the Department of energy. Equipment retrofit conservation measures are based on published reports on various heating retrofits. Heating and cooling system replacement conservation measures are based on the energy ratings of new heating and cooling equipment. The Weatherization Program anticipates that this computer-based energy audit will offer substantial performance improvements to many states who choose to incorporate it into their programs. When conservation measures are evaluated locally according to climate, fuel cost, measure cost, and existing house conditions, the Program will be closer to its goal of assuring the maximum return for every federal dollar spent.

  19. Fernald radon stack monitor user`s guide

    SciTech Connect (OSTI)

    Whitley, C.R.

    1997-01-01

    The stack monitor uses long-range alpha detection (LRAD) technology for the measurement of radon levels in the stack emissions. The basic principle behind LRAD is the collection of ions created in air through the energy loss mechanisms of decay alphas. This is accomplished by establishing an electric field in the region where alpha decays will occur, and directing the ions via the field onto a biased plate. Accumulation of charge on the plate results in a current in the biasing circuit which can be read with a sensitive electrometer. In electrostatic LRAD designs, the linearity of the measured current with gross alpha activity is well-established. In order to determine radon-222 levels in the presence of other radon isotopes, it is necessary to perform some type of isotopic analysis on the stack samples. In the present case, other radon isotopes of possible concern are radon-219, which occurs in the decay chain of uranium-235, and radon-220, found in the decay chain of thorium-232. Radon-219, with a half-life of four seconds, presents no difficulty for the situation in which emanations from the vitrification process undergo as little as one minute of delay before release into the stack. For example, an initial concentration of 200,000 pCi/l of radon-219 decays to 5 pCi/l in one minute. Radon-220, however, has a half-life of about 55 seconds. If initially present in a substantial ratio to radon-222, a radon gross-alpha measurement on stack emissions would have a significant error if used as a measure for radon-222, even with many minutes of processing delay before the sample was taken.

  20. Cori Phase 1 for Edison Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cori uses a new batch scheduler, SLURM. Edison used TorqueMoab batch scheduler until Nov ... The main implications for users of SLURM replacing TorqueMoab are: No more shared MOM ...

  1. User:Heatpumpsupply | Open Energy Information

    Open Energy Info (EERE)

    page Edit with form History User:Heatpumpsupply Jump to: navigation, search Air-source-heat-pump-water-heaters.jpg Name Heatpumpsupply Edits 3 Heatpumpsupply.com New energy...

  2. Nuclear Physics: User/Researcher Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advisors New User Checklist us citizen non-us-citizen us citizen Congratulations, you will be working with a student here at Jefferson Lab. We want to take the opportunity to share ...

  3. User:Enitz | Open Energy Information

    Open Energy Info (EERE)

    Enitz Jump to: navigation, search Name Elizabeth Nitz Location Erie, Colorado Edits 15 Hello there I'm a coder Retrieved from "http:en.openei.orgwindex.php?titleUser:Enitz&old...

  4. User Research Administration | Stanford Synchrotron Radiation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-rayVUV Proposals, Scheduling) Tel: (650) 926-2886 Fax: (650) 926-3600 Joint SSRLLCLS User Registration, Safety Training, Check-In, On-Boarding Services Sacha Hanigan SLAC...

  5. User:Nieva0826 | Open Energy Information

    Open Energy Info (EERE)

    167816 174829079221990 100000846967285 372824 2587595 n.jpg Name nieva0826 Location Japan Edits 3 Retrieved from "http:en.openei.orgwindex.php?titleUser:Nieva0826&oldid33...

  6. User:Ajohnson7 | Open Energy Information

    Open Energy Info (EERE)

    Ajohnson7 Jump to: navigation, search Name Adam Johnson Location DallasFort Worth Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:Ajohnson7&oldid692891...

  7. User:Graham7781 | Open Energy Information

    Open Energy Info (EERE)

    with Jarett Zuboy (User:JZ) on helping build the external community for OpenEI through social media networks such as Facebook, Twitter, Youtube, and Blogger. I enjoy a balanced...

  8. User:JAABot | Open Energy Information

    Open Energy Info (EERE)

    search Cylon.jpg Name JAABot Location Golden, Colorado Edits 1083 This bot is for site maintenance. Retrieved from "http:en.openei.orgwindex.php?titleUser:JAABot&oldid50741...

  9. User:Dbrodt | Open Energy Information

    Open Energy Info (EERE)

    Dbrodt Jump to: navigation, search Debbie in NREL's VIBE Control Room Name Debbie Brodt-Giles Location Golden, Colorado Edits 23 Friends User Edits JZ 42 GregZiebold 3711...

  10. User:JZ | Open Energy Information

    Open Energy Info (EERE)

    JZ Jump to: navigation, search Fueling a natural gas vehicle Name JZ Location Colorado Edits 42 Friends User Edits GregZiebold 3711 Woodjr 59997 Dbrodt 23 ElaineWood 243 Graham7781...

  11. User:Nlangle | Open Energy Information

    Open Energy Info (EERE)

    Renewable Energy Opportunity DataBus SmartGrid.gov My Code Lab Green Button Testing Map Test User:NlangleWidget Test Page Migration Mass Page Migration example For use when...

  12. User Authentication Policy | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users of the Argonne production systems are required to use a CRYPTOCard one time password... are: Something you know (for example, a password); Something you have (for example, an ID ...

  13. User:Twong | Open Energy Information

    Open Energy Info (EERE)

    Twong Jump to: navigation, search Name Teresa Wong Location Sacramento, California Edits 24783 Friends User Edits Dbrodt 23 ElaineWood 243 Graham7781 7956 GregZiebold 3711 JZ 42...

  14. Radiation Embrittlement Archive Web App User Guide

    SciTech Connect (OSTI)

    Klasky, Hilda B; Williams, Paul T; Bass, Bennett Richard

    2013-09-01

    The Radiation Embrittlement Archive (REAP) Web App User Guide describes the software requirements to use the REAP web app, how to navigate, search, enter and extract data from the archive.

  15. Spring O&M Users Group Meeting

    Broader source: Energy.gov [DOE]

    The spring 2015 UVIG O&M User Group meeting will feature a plenary session focused on blade inspection best practices.  The UVIG membership will hear presentations from:

  16. Help:Blocking users | Open Energy Information

    Open Energy Info (EERE)

    3 What it means to be blocked 4 See Also Blocking Blocking users is fairly straightforward, visit Special:BlockIP and follow these steps: IP Address or username: Enter in...

  17. Demonstration and Validation Assets: User Manual Development

    SciTech Connect (OSTI)

    2008-06-30

    This report documents the development of a database-supported user manual for DEMVAL assets in the NSTI area of operations and focuses on providing comprehensive user information on DEMVAL assets serving businesses with national security technology applications in southern New Mexico. The DEMVAL asset program is being developed as part of the NSPP, funded by both Department of Energy (DOE) and NNSA. This report describes the development of a comprehensive user manual system for delivering indexed DEMVAL asset information to be used in marketing and visibility materials and to NSTI clients, prospective clients, stakeholders, and any person or organization seeking it. The data about area DEMVAL asset providers are organized in an SQL database with updateable application structure that optimizes ease of access and customizes search ability for the user.

  18. VOLTTRON 3.0: User Guide

    SciTech Connect (OSTI)

    Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas; Monson, Kyle E.; Akyol, Bora A.; Carpenter, Brandon J.

    2015-11-30

    This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  19. VOLTTRON 2.0: User Guide

    SciTech Connect (OSTI)

    Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas; Monson, Kyle E.; Akyol, Bora A.; Carpenter, Brandon J.; Tenney, Nathan D.

    2014-11-30

    This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  20. 2009 CNM Users Meeting | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 CNM Users Meeting October 5-7, 2009 Full Information Available Here Meeting Summary Plenary Session Views from DOE and Washington Keynote Presentations Stephen Chou (Princeton University), "Nanostructure Engineering: A Path to Discovery and Innovation" Andreas Heinrich (IBM Almaden Research Center), "The Quantum Properties of Magnetic Nanostructures on Surfaces" User Science Highlights Focus Sessions Nanostructured Materials for Solar Energy Utilization Materials and

  1. DIORAMA Location Type User's Guide

    SciTech Connect (OSTI)

    Terry, James Russell

    2015-01-29

    The purpose of this report is to present the current design and implementation of the DIORAMA location type object (LocationType) and to provide examples and use cases. The LocationType object is included in the diorama-app package in the diorama::types namespace. Abstractly, the object is intended to capture the full time history of the location of an object or reference point. For example, a location may be speci ed as a near-Earth orbit in terms of a two-line element set, in which case the location type is capable of propagating the orbit both forward and backward in time to provide a location for any given time. Alternatively, the location may be speci ed as a xed set of geodetic coordinates (latitude, longitude, and altitude), in which case the geodetic location of the object is expected to remain constant for all time. From an implementation perspective, the location type is de ned as a union of multiple independent objects defi ned in the DIORAMA tle library. Types presently included in the union are listed and described in subsections below, and all conversions or transformation between these location types are handled by utilities provided by the tle library with the exception of the \\special-values" location type.

  2. Bevatron/Bevalac user's handbook: biology and medicine. Revision

    SciTech Connect (OSTI)

    Not Available

    1985-04-01

    The Bevalac Biomedical Facility develops a source of near-relativistic heavy ions for applications to radiation biology, radiation therapy and diagnostic radiology. Pulsed beams of high LET heavy ions with variable pulse width, frequency, intensity and energy are produced and delivered to the Biomedical Facility by the Bevatron/Bevalac accelerator complex. Dosimetry equipment under computer control provides accurate determinations of absorbed doses in all regions of the Bragg curve. Depth-dose modifying devices and precise specimen positioning equipment are available. Animal housing and tissue culture facilities are convenient to the experimenter. This handbook is designed to provide the user with the relevant information for planning, proposing and executing an experiment.

  3. Center for Nanophase Materials Sciences (CNMS) - Becoming A User

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BECOMING A USER The CNMS user program provides access to equipment and technical expertise for nanoscale research that defines state of the art. The program is open to users from...

  4. CNM Users Executive Committee By-Laws | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users Executive Committee By-Laws This charter defines the roles and responsibilities of Argonne's Center for Nanoscale Materials Users Executive Committee. PDF icon CNM_users_organization_bylaws

  5. Microsoft Word - CAMD Cleanroom Login System User.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Once you have clicked the LOG IN button, you should now see a screen that looks like Figure 2. The user's UserID and Password is identical to hisher booking UserID and Password. ...

  6. All Users Now Enabled on Edison Phase 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users Now Enabled on Edison Phase 2 All Users Now Enabled on Edison Phase 2 August 30, 2013 by Francesca Verdier All user accounts have been enabled on the second phase of Edison,...

  7. New User Facilities Web Page Highlights Work at National Laboratories...

    Office of Environmental Management (EM)

    User Facilities Web Page Highlights Work at National Laboratories New User Facilities Web Page Highlights Work at National Laboratories January 15, 2014 - 12:00am Addthis The User ...

  8. Force Control and Nonlinear Master-Slave Force Profile to Manage an Admittance Type Multi-Fingered Haptic User Interface

    SciTech Connect (OSTI)

    Anthony L. Crawford

    2012-08-01

    Natural movements and force feedback are important elements in using teleoperated equipment if complex and speedy manipulation tasks are to be accomplished in remote and/or hazardous environments, such as hot cells, glove boxes, decommissioning, explosives disarmament, and space to name a few. In order to achieve this end the research presented in this paper has developed an admittance type exoskeleton like multi-fingered haptic hand user interface that secures the users palm and provides 3-dimensional force feedback to the users fingertips. Atypical to conventional haptic hand user interfaces that limit themselves to integrating the human hands characteristics just into the systems mechanical design this system also perpetuates that inspiration into the designed user interfaces controller. This is achieved by manifesting the property differences of manipulation and grasping activities as they pertain to the human hand into a nonlinear master-slave force relationship. The results presented in this paper show that the admittance-type system has sufficient bandwidth that it appears nearly transparent to the user when the user is in free motion and when the system is subjected to a manipulation task, increased performance is achieved using the nonlinear force relationship compared to the traditional linear scaling techniques implemented in the vast majority of systems.

  9. The Montana Rivers Information System: Edit/entry program user`s manual

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases. The purpose of this User`s Manual is to: (1) describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and (2) provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  10. DOSFAC2 user`s guide Young, M.L.; Chanin, D. 56 BIOLOGY AND MEDICINE...

    Office of Scientific and Technical Information (OSTI)

    and (3) a users guide. 20 refs., 5 tabs. INIS; OSTI as TI97008490 Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology; Sandia...

  11. User Facilities | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Facilities User Facilities Print Text Size: A A A FeedbackShare Page The Nuclear Physics program supports the following national scientific user facilities: Argonne Tandem ...

  12. U-262: Microsoft Internet Explorer Flaw Lets Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Microsoft Internet Explorer Flaw Lets Remote Users Execute Arbitrary Code U-262: Microsoft Internet Explorer Flaw Lets Remote Users Execute Arbitrary Code September 18, 2012 -...

  13. Training Courses for Argonne User Facilities | Advanced Photon...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training Courses for Argonne User Facilities All core courses can be taken via the Remote Training web site. See the user training requirements summary for general information....

  14. User-Oriented Modeling Tools for Advanced Hybrid and Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User-Oriented Modeling Tools for Advanced Hybrid and Climate-Appropriate Rooftop Air Conditioners User-Oriented Modeling Tools for Advanced Hybrid and Climate-Appropriate Rooftop ...

  15. User Executive Committee Charter (Program Document) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    User Executive Committee Charter Citation Details In-Document Search Title: User Executive Committee Charter Publication Date: 2014-10-01 OSTI Identifier: 1167400 Report Number(s): ...

  16. V-202: Cisco Video Surveillance Manager Bugs Let Remote Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Video Surveillance Manager Bugs Let Remote Users Obtain Potentially Sensitive Information V-202: Cisco Video Surveillance Manager Bugs Let Remote Users Obtain Potentially Sensitive...

  17. V-155: Apache Tomcat FORM Authenticator Lets Remote Users Conduct...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: Apache Tomcat FORM Authenticator Lets Remote Users Conduct Session Fixation Attacks V-155: Apache Tomcat FORM Authenticator Lets Remote Users Conduct Session Fixation Attacks...

  18. User:Woodjr/Sandbox/Sparql2 | Open Energy Information

    Open Energy Info (EERE)

    SandboxSparql2 < User:Woodjr | Sandbox Jump to: navigation, search States of the USA Retrieved from "http:en.openei.orgwindex.php?titleUser:WoodjrSandbox...

  19. U-047: Siemens Automation License Manager Bugs Let Remote Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or...

  20. Center for Nanophase Materials Sciences (CNMS) - 2014 CNMS User...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials Sciences Oak Ridge National Laboratory September 15-19, 2014 Chestnut Ridge Campus of Oak Ridge National Laboratory Oak Ridge, Tennessee User Meeting Announcement User...

  1. Center for Nanophase Materials Sciences (CNMS) - 2011 CNMS User...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials Sciences Oak Ridge National Laboratory September 19-20, 2011 Chestnut Ridge Campus of Oak Ridge National Laboratory Oak Ridge, Tennessee User Meeting Announcement User...

  2. ESIF User Guide; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    2015-05-01

    The ESIF User Guide provides information on safety, procedures, and policies for new users of the Energy Systems Integration Facility (ESIF).

  3. T-563: Red Hat Directory Server Bugs Let Local Users Gain Elevated Privileges and Remote and Local Users Deny Service

    Broader source: Energy.gov [DOE]

    Several vulnerabilities were reported in Red Hat Directory Server. A local user can obtain elevated privileges on the target system. A remote user can cause denial of service conditions. A local user can cause denial of service conditions.

  4. User interface for a tele-operated robotic hand system

    SciTech Connect (OSTI)

    Crawford, Anthony L

    2015-03-24

    Disclosed here is a user interface for a robotic hand. The user interface anchors a user's palm in a relatively stationary position and determines various angles of interest necessary for a user's finger to achieve a specific fingertip location. The user interface additionally conducts a calibration procedure to determine the user's applicable physiological dimensions. The user interface uses the applicable physiological dimensions and the specific fingertip location, and treats the user's finger as a two link three degree-of-freedom serial linkage in order to determine the angles of interest. The user interface communicates the angles of interest to a gripping-type end effector which closely mimics the range of motion and proportions of a human hand. The user interface requires minimal contact with the operator and provides distinct advantages in terms of available dexterity, work space flexibility, and adaptability to different users.

  5. User Interface Program for secure electronic tags

    SciTech Connect (OSTI)

    Cai, Y.; Koehl, E.R.; Carlson, R.D.; Raptis, A.C.

    1995-05-01

    This report summarizes and documents the efforts of Argonne National Laboratory (ANL) in developing a secure tag communication user interface program comprising a tag monitor and a communication tool. This program can perform the same functions as the software that was developed at the Lawrence Livermore National Laboratory (LLNL), but it is enhanced with a user-friendly screen. It represents the first step in updating the TRANSCOM Tracking System (TRANSCOM) by incorporating a tag communication screen menu into the main menu of the TRANSCOM user program. A working version of TRANSCOM, enhanced with ANL secure-tag graphics, will strongly support the Department of Energy Warhead Dismantlement/Special Nuclear Materials Control initiatives. It will allow commercial satellite tracking of the movements and operational activities of treaty-limited items and transportation vehicles throughout Europe and the former USSR, as well as the continental US.

  6. NERSC Users Group Teleconference May 12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users Group Teleconference May 12 NERSC Users Group Teleconference May 12 May 11, 2011 by Francesca Verdier The next NUG teleconference is Thursday May 12, at 11:00 AM Pacific time. On the agenda: new NX server wait times table for nodes requested versus hours requested: Jobs Summary Statistics restricting access to the premium queue NUG feedback on hopper in production To receive an invitation to participate in NUG teleconferences, join the nug e-mail list: send e-mail to nug-request@nersc.gov

  7. Rooftop Unit Comparison Calculator User Manual

    SciTech Connect (OSTI)

    Miller, James D.

    2015-04-30

    This document serves as a user manual for the Packaged rooftop air conditioners and heat pump units comparison calculator (RTUCC) and is an aggregation of the calculator’s website documentation. Content ranges from new-user guide material like the “Quick Start” to the more technical/algorithmic descriptions of the “Methods Pages.” There is also a section listing all the context-help topics that support the features on the “Controls” page. The appendix has a discussion of the EnergyPlus runs that supported the development of the building-response models.

  8. SSRL/LCLS User Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REVISED 08/13/12 CJK SSRL/LCLS User Account Form To open or renew an account, complete and submit this form along with an original Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the Purchase Order to: Jackie Kerlegan SLAC National Accelerator Laboratory User Research Administration, MS 99 2575 Sand Hill Rd. Menlo Park, CA 94025 FAX:

  9. LUG 2015: LANSCE User Group Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LUG 2015 LUG 2015: LANSCE User Group Meeting WHEN: Nov 02, 2015 8:00 AM - Nov 03, 2015 5:00 PM WHERE: La Posada de Santa Fe CONTACT: Elena Fernandez 5-0541 CATEGORY: Science TYPE: Meeting INTERNAL: Calendar Login Event Description The LANSCE User Facility continues to carry out a critical mission for the Nation and a leading program of fundamental research. The past year has seen significant changes to the facility which bring with them opportunity. The purpose of the meeting is to hear your

  10. User Support | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services The ALCF User Experience Help Desk assists users with support requests related to their ALCF projects. The help desk is open from 9 a.m. until 5 p.m. (Central time) Monday through Friday, exclusive of holidays. Contact Us Email: support@alcf.anl.gov Telephone: 630-252-3111 866-508-9181 Help Desk: Building 240, 2-D-15/16 Argonne National Laboratory 9700 South Cass Avenue Argonne, IL 60439 Help Tickets To submit a help ticket for a technical issue, please email support@alcf.anl.gov and to

  11. Wind energy systems information user study

    SciTech Connect (OSTI)

    Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

    1981-01-01

    This report describes the results of a series of telephone interviews with potential users of information on wind energy conversion. These interviews, part of a larger study covering nine different solar technologies, attempted to identify: the type of information each distinctive group of information users needed, and the best way of getting information to that group. Groups studied include: wind energy conversion system researchers; wind energy conversion system manufacturer representatives; wind energy conversion system distributors; wind turbine engineers; utility representatives; educators; county agents and extension service agents; and wind turbine owners.

  12. 2008 CNM Users Meeting | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 CNM Users Meeting Tuesday, May 6, 2008 4:45-5:45 CNM Facility Tour 7:00-9:30 Users Week Banquet Wednesday, May 7, 2008 CNM Plenary and Science Session Bldg. 402 Lecture Hall 8:45-8:50 Welcome, Paul Evans, University of Wisconsin-Madison, CNM UEC Chair 8:50-9:00 Welcome from Laboratory Directorate,Al Sattelberger, Associate Laboratory Director for Energy Sciences & Engineering, Argonne National Laboratory 9:00-9:30 Update from Washington: Eric Rohlfing, Associate Director of Science for

  13. 2016-08-pdsf-user-meet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 9, 2016 Jan Balewski * PDSF performance * PDSF job queue oversubscribed * PDSF interactive nodes * past/future outages * announcements * toward common PDSF Shifter image * AOB PDSF Users Meeting Utilization 2 PDSF Users Meeting PDSF queue capacity exceeded - INC0088407 3 Dates: 7-27, 8-2 , 8-9 Symptom: "I've been unable to submit more than a handful of jobs at a time since earlier today." PDSF load at the time: pdsf9 $ sgeusers - - - r qw Eqw hr hqw Ehqw dr dt jobIDs Project

  14. Task 4 - natural gas storage - end user interaction

    SciTech Connect (OSTI)

    1997-02-18

    New opportunities have been created for underground gas storage as a result of recent regulatory developments in the energy industry. The Federal Energy Regulatory Commission (FERC) Order 636 directly changed the economics of gas storage nationwide. Pipelines have been required to {open_quotes}unbundle{close_quotes} their various services so that pipeline users can select only what they need from among the transportation, storage, balancing and the other traditional pipeline services. At the same time, the shift from Modified Fixed Variable (MFV) rate design to Straight Fixed Variable (SFV) rate design has increased the costs of pipeline capacity relative to underground storage and other supply options. Finally, the ability of parties that have contracted for pipeline and storage services to resell their surplus capacities created by Order 636 gives potential gas users more flexibility in assembling combinations of gas delivery services to create reliable gas deliverability. In response to Order 636, the last two years have seen an explosion in proposals for gas storage projects.

  15. Natural gas storage - end user interaction task 6

    SciTech Connect (OSTI)

    1997-05-01

    New opportunities have been created for underground gas storage as a result of recent regulatory developments in the energy industry. The Federal Energy Regulatory Commission (FERC) Order 636 directly changed the economics of gas storage nationwide. Pipelines have been required to {open_quotes}unbundle{close_quotes} their various services so that pipeline users can select only what they need from among the transportation, storage, balancing and the other traditional pipeline services. At the same time, the shift from Modified Fixed Variable (MFV) rate design to Straight Fixed Variable (SFV) rate design has increased the costs of pipeline capacity relative to underground storage and other supply options. Finally, the ability of parties that have contracted for pipeline and storage services to resell their surplus capacities created by Order 636 gives potential gas users more flexibility in assembling combinations of gas delivery services to create reliable gas deliverability. In response to Order 636, the last two years have seen an explosion in proposals for gas storage projects. This paper describes the market for natural gas storage.

  16. Acknowledging User Facilities | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Acknowledging User Facilities User Facilities User Facilities Home User Facilities at a Glance User Resources Getting Started User Safety Access Models User Agreements Data Management Resources Acknowledging User Facilities User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User Resources Acknowledging

  17. A user`s guide to LUGSAN II. A computer program to calculate and archive lug and sway brace loads for aircraft-carried stores

    SciTech Connect (OSTI)

    Dunn, W.N.

    1998-03-01

    LUG and Sway brace ANalysis (LUGSAN) II is an analysis and database computer program that is designed to calculate store lug and sway brace loads for aircraft captive carriage. LUGSAN II combines the rigid body dynamics code, SWAY85, with a Macintosh Hypercard database to function both as an analysis and archival system. This report describes the LUGSAN II application program, which operates on the Macintosh System (Hypercard 2.2 or later) and includes function descriptions, layout examples, and sample sessions. Although this report is primarily a user`s manual, a brief overview of the LUGSAN II computer code is included with suggested resources for programmers.

  18. The Building Design Advisor

    SciTech Connect (OSTI)

    Papamichael, K.; LaPorta, J.; Chauvet, H.; Collins, D.; Trzcinski, T.; Thorpe, J.; Selkowitz, S.

    1996-03-01

    The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA.

  19. User information for WinGridder Version 3.0

    SciTech Connect (OSTI)

    Pan, Lehua; Pan, Lehua

    2007-06-12

    WINGRIDDER V3.0 is a Windows-based software for designing and generating numerical grids for numerical simulators that are based on the"integral finite difference" or the"control volume" numerical scheme (e.g., TOUGH2, Pruess et al., 1996). The user can design and generate grid that properly represents the stratigraphic features, inclined faults, and repository. WINGRIDDER V3.0 is an upgrade from WINGRIDDER V2.0. This revision includes testable requirements as listed in the Requirements Document (RD), 10024-RD-3.0-00, Section 2. With new features, WINGRIDDER V3.0 adds the ability to generate a multiple-interactive-continuum (MINC) grid.

  20. User 'To Do' List after Beam Time is Assigned | Linac Coherent...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... LCLS users must complete several safety training courses online BEFORE traveling to SLAC. Complete User Agreements Before user experiments begin, a User Agreement must be ...